WorldWideScience

Sample records for standard oekologisches bauen

  1. Concepts of ecological construction. Seminar volume of the Central Information Bureau for Environmental Consulting in Bavaria. Vol. 6; Oekologisches Bauen. Seminarband der Zentralen Informationsstelle Umweltberatung Bayern. Bd. 6

    Kohmanns, B. [comp.; Koller, U. [comp.; Klemmer, A. [comp.; Haury, H.J. [comp.

    1995-09-01

    On 11 May 1995 the Central Information Bureau for Environmental Consulting in Bavaria held its sixth seminar. The seminar was dedicated to the subject `Concepts of Ecological Construction`. It attracted some 80 representatives of environmental consulting offices and other authorities assigned to environmental consulting tasks. Leading scientists from research institutions and the administration presented the current state of research into the ecological aspects of construction and planning. The lecturers dealt with diverse topics ranging from building site selection over questions on energy to aspects of building materials and illustrated the new possibilities of environmentally adapted construction by reference to practical examples. (orig./HW) [Deutsch] Am 11. Mai 1995 veranstaltete die Zentrale Informationsstelle, Umweltberatung Bayern ihr sechstes Seminar. Thema der Seminarveranstaltung, an der rund 80 Vertreterinnen und Vertreter von Umweltberatungsstellen und anderen mit Umweltberatung beauftragten Behoerden teilnahmen, war `Oekologisches Bauen`. Fuehrende Wissenschaftler und Wissenschaftlerinnen aus Forschung und Behoerden stellten den aktuellen Stand der Forschung oekologischer Aspekte des Bauens und Planens dar. Beginnend mit Kriterien fuer die Standortsuche von Bauvorhaben ueber Energiefragen und Aspekte oekologischer Baustoffe fuehrten die Referentinnen und Referenten schliesslich auch an praktischen Beispielen neue Moeglichkeiten des umweltgerechten Bauens vor. (orig./HW)

  2. Environmentally friendly planning and construction - ecological aspects; Unweltschonendes Planen und Bauen - oekologische Aspekte

    Boos, H.J. [Bundesministerium fuer Raumordnung, Bauwesen und Staedtebau, Bonn (Germany)

    1995-09-01

    The author of the present lecture deals with the change in ecological awareness and its influence on construction. The following topics are covered: The starting situation as seen from today; political tasks, ecology and architecture; air pollution control and energy conservation; building materials and ecology; healthy construction concepts and healthy living. (HW) [Deutsch] Der Verfasser setzt sich in seinem Vortrag auseinander mit der Veraenderung im oekologischen Bewusstsein und der Auswirkung auf das Bauen. Inhalt: - Ausgangsituation aus heutiger Sicht - politische Aufgaben - Oekologie und Architektur - Immisionsschutz und Energieeinsparung - Baustoff und Oekologie - gesundes Bauen und Wohnen. (HW)

  3. Ecological construction methods are energy saving construction methods - experiences with the low-energy standard; Oekologisches Bauen ist energiesparendes Bauen - Erfahrungen mit dem Niedrigenergiestandard

    Feist, W. [Inst. Wohnen und Umwelt, Darmstadt (Germany)

    1995-09-01

    Efficient energy utilisation (intelligent energy saving techniques) is characterised by the following features. When realised in new buildings using currently available techniques it can help save up to 90% of what has hitherto been considered normal energy consumption. It becomes economically efficient for reductions in energy consumption of 50% or more. In terms of cost it outcompetes all non-fossil energy carriers (i.e., excluding oil, natural gas, and coal) of the future. (orig./HW) [Deutsch] Die rationelle Energienutzung (`intelligente Einspartechnik`) - kann mit heute verfuegbarer Technik beim Neubau bis ca. 90% der bisher verwendeten Energie einsparen helfen; - ist bei Energieeinsparungen von ueber 50% bereits heute wirtschaftlich vertretbar; - ist gegenueber allen Zukunftsenergietraegern, die nicht auf fossilen Brennstoffen (also Oel, Erdgas und Kohle) basieren, konkurrenzlos kostenguenstig. (orig./HW)

  4. Digital building planning - digital construction; Digitale Gebaeudeplanung - digitales Bauen

    Friedrichs, K. [Karlsruhe Univ. (T.H.) (Germany). Fakultaet fuer Architektur

    1995-12-31

    In chapter 3 of the anthology about building control the following aspects are discussed: digital building planning and digital construction, which are characterised by an increasing complexity of planning, buildings, construction technology and construction processes. In this respect the digital-technical scenarios, passive and active objects as well as digital construction are described. (BWI) [Deutsch] Kapitel 3 des Sammelbandes ueber Building Control ist den Themen Digitale Gebaeudeplanung und Digitales Bauen gewidmet, die durch die zunehmende Komplexitaet von Planung, Gebaeuden, Bautechnologien und -prozessen bedingt sind. In diesem Zusammenhang werden folgende Themen angesprochen: Digitale technische Szenarien, passive und aktive Objekte sowie digitales Bauen. (BWI)

  5. Sustainable design, construction and living in the information age; Nachhaltiges Planen, Bauen und Wohnen im Informationszeitalter

    Bretthauser, G.; Dietze, S.; Haefele, K.H.; Isele, J.; Jaekel, J.

    2001-06-01

    prefabricated wall elements, of components for building design tools, for the information exchange between computer-aided design and computer-aided manufacturing, for the integration of home automation systems in the product model, of user interfaces and user adaptation of SmartHomes. Finally, possibilities of linking-up with R and D projects from other institutes in the Forschungszentrum Karlsruhe and potential external partners for cooperation are mentioned. (orig.) [German] Die vorliegende Studie widmet sich der Thematik des nachhaltigen Planens, Bauens und Wohnens im Informationszeitalter. Der Fokus liegt dabei, entsprechend der Aufgabengebiete und Kompetenzfelder des IAI, auf dem Beitrag der Informations- und Automatisierungstechnik. Die Studie basiert auf umfangreichen Recherchen, den Erfahrungen der Autoren und ersten Vorversuchen. Ihr Anliegen ist es, nach der Analyse des Entwicklungsstandes und der Entwicklungstrends Schlussfolgerungen fuer eigene F and E-Vorhaben zu ziehen. Die allgemeinen Rahmenbedingungen fuer zukuenftiges ''Bauen und Wohnen'' werden insbesondere unter dem Gesichtspunkt der Nachhaltigkeit praesentiert. Wichtige Fragestellungen innerhalb der sozialen, wirtschaftlichen und oekologischen Dimension eines nachhaltigen ''Bauens und Wohnens'' werden im Rahmen dieser Studie allerdings nur angerissen. Die Analyse des Entwicklungsstands und der Entwicklungstendenzen konzentriert sich auf drei Bereiche, den Einsatz der Informationstechnologie insbesondere in der Planungs- und Entwurfsphase, der automatisierten Fertigung und der Hausautomatisierung. Generell kann festgestellt werden, dass der verstaerkte Einsatz der Informations- und Automatisierungstechnik im Bereich ''Bauen und Wohnen'' ein grosses Innovationspotenzial birgt. Wichtige Tendenzen sind im Bereich Planung die Entwicklung von Standards fuer Produktdatenmodelle und die Nutzung von digitalen Gebaeudemodellen in allen Lebenszyklusphasen. Im

  6. Power supply in future: ecological aspects; Kuenftige Stromversorgung: Oekologische Aspekte

    Hustedt, M.

    2000-06-01

    The most important prerequisites for an ecological supply of energy in the future is the opting out of nuclear energy and the completion of the second and third phase of the socio-ecological tax reform. As a part of our energy will continue to be generated on the basis of fossil fuels in the foreseeable future, it is essential that a radical change takes place in the efficiency of fossil energy engineering. In addition to this, any possible energy-saving potential must be exploited; this includes the new energy-saving law, promoting the modernisation of old buildings and modern energy management (heat insulation, heating engineering, warm water heating etc.). For an ecological power supply the share of renewable energies must be increased to form a major pillar of our power supply. The '100,000-roof' programme of the German federal government and the development programme for near-market renewable energy sources form part of this approach. Energy research should shift its orientation and accelerate the conversion of our power supply: priority should be given to developing energy-saving technologies and renewable energy. Supporting municipalities and public utilities is especially important. This means revising the basic conditions of energy laws so that they assist public utilities to face competition as power utilities. (orig.) [German] Wichtigste Voraussetzung fuer eine kuenftige oekologische Stromversorgung sind der Ausstieg aus der Atomenergie sowie die Vollendung der zweiten und dritten Stufe der oekologisch-sozialen Steuerreform. Da in absehbarer Zeit ein Teil der Energieerzeugung weiterhin auf Basis fossiler Energietraeger erfolgen wird, ist eine Effizienzrevolution bei den fossilen Energietechnologien notwendig. Darueber hinaus muessen die erschliessbaren Energieeinsparpotentiale genutzt werden; dazu gehoeren die neue Energiesparverordnung, die Foerderung der Altbausanierung sowie ein modernes Energiemanagement (Waermedaemmung

  7. How much of our environment do we need?. MIPS - a measuring method for an ecological economy; Wieviel Umwelt braucht der Mensch?. MIPS - Das Mass fuer oekologisches Wirtschaften

    Schmidt-Bleek, F.; Klueting, R.

    1994-12-31

    This book illustrates how much of our environment we use up with the products and services associated with everyday life, how large the ecological impact of our consume society actually is; we build roads, dams, heavy goods vehicles, warehouses, factories, monocultures and rubbish tips. We take iron ore, sand, gravel, coal oil, water, air and wood from our environment in huge, ever-increasing qualities. Slag heaps, erosion and disrupted water flow are left behind. This man-made materialistic society is altering nature`s balance persistently and for the long term. This materialism is no longer ecologically sustainable. We must learn to prosper with less negative environmental impacts. The author has developed a means of measuring the intensity of environmental impact of products, processes and services, based on the material consumed to allow acurate comparisons. In this comprehensible informative book he reveals, for the first time publicly, the measure/formula by means of many practical examples and illustrations to show a way out of the crisis. (orig./UA) [Deutsch] Dieses Buch veranschaulicht, wieviel Umwelt wir fuer Produkte und Dienstleistungen des taeglichen Lebens verbrauchen, wie gross die `oekologischen Rucksaecke` unseres Konsums wirklich sind: Wir bauen Strassen, Daemme, Lastwagen, Lager, Fabriken, Supermaerkte, Legen Monokulturen und Abfalldeponien an. Aus der Umwelt holen wir Erze, Sand, Kies, Oel, Wasser, Luft und Holz in riesigen und immer wachsenden Mengen. Zurueck bleiben Abraumhalden, Erosionen und gestoerte Wasserlaeufe. Die menschengemachten Materialverschiebungen, die Stoffstroeme, veraendern die natuerlichen Balancen, nachhaltig und unaufhaltsam. Die Materialintensitaet unseres Wohlstandes ist oekologisch nicht mehr tragbar. Wir muessen lernen, Wohlstand mit weniger Umwelt zu erhalten und zu schaffen. Der Autor hat ein neues Mass (mips=Material-Intensitaet pro Serviceeinheit) entwickelt, dessen Basis der Stoffverbrauch ist und das es

  8. Solar building construction - new technologies; Solares Bauen - Neue Technologien fuer Gebaeude

    Luther, J.; Voss, K.; Wittwer, V. [Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (Germany). Abt. ``Thermische und Optische Systeme``

    1998-02-01

    There is an increasing demand for integrated building concepts in order to reduce energy consumption. Building design, construction and heating, ventilation and air-conditioning (HVAC) technology are decisive in this respect. Thus, an essentially higher energy efficiency is achieved and solar energy becomes the main energy source. An `active building envelope` assumes the task of controlling the energy flows between inside and outside. This paper reports on new components, system concepts and planning tools for solar building. (orig.) [Deutsch] Fuer zukuenftige Bauten werden in hohem Masse Forderungen nach integrierten Konzepten zur Begrenzung des Energieverbrauchs gestellt. Gestalt, Konstruktion und Klimatechnik sind dabei massgebliche Einflussfaktoren. Hierdurch wird eine wesentlich hoehere Energieeffizienz erzielt und Solarenergie kann die uebrigen Energiequellen zurueckdraengen. Eine `aktive Gebaeudehuelle` uebernimmt die Aufgabe, den Energiefluss zwischen Innen und Aussen zu steuern. Der Beitrag berichtet ueber neue Komponenten, Systemkonzepte und Planungswerkzeuge fuer das Solare Bauen. (orig.)

  9. Josef Frank and the history of architecture: Gothic and the Renaissance, Leon Battista Alberti and Albrecht Dürer in the architectural discourse on Neues Bauen at the beginning of the 1930s

    Caterina Cardemone

    2016-06-01

    Full Text Available The paper focuses on Josef Frank’s convinced use of historiographical arguments in his sharp critique of German modernist architecture. Frank’s attention to architectural history dates back to his education at the Technische Hochschule in Vienna, with Carl König, and the writing of a doctoral thesis on Leon Battista Alberti’s religious buildings in 1910. If a profound knowledge of Alberti’s writings informs Frank’s entire theoretical work, the point discussed here is the parallel between Neues Bauen and Gothic traced by Frank to exclude Neues Bauen from a true modernity, based, on the opposite, on a classical tradition of thought. An attempt is made to reconstruct Frank’s historiographical references and to insert his work in the broader historiographical context, thus highlighting a close link between architectural theory and critique on the one hand and contemporary historiographical constructions on the other.

  10. Ecological balancing of used oil utilization methods. Final report; Oekologische Bilanzierung von Altoel-Verwertungswegen. Oekologischer Vergleich von vier wichtigen Altoelverwertungsverfahren. Abschlussbericht

    Kolshorn, K.U. [ARCADIS Trischler und Partner GmbH (AT und P), Darmstadt (Germany); Fehrenbach, H. [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany)

    2000-01-01

    In Germany, about 480.000 tons of used oil that are collected each year have to be disposed of and utilized. Four used oil utilization processes (re-processing to base oils; re-processing for fuels; thermal utilization in cement works; pressure gasification for the production of synthesis gas or methanol) were evaluated using an eco-balance. The balance boundary comprises on the one hand the utilization processes and their system-related side-processes (provision of energy, production of auxiliaries, waste disposal, transport) and on the other the processes that are substituted by the products recovered from the utilization processes. The impact assessment covers the indicator list of DIN/NAGUS. Furthermore, the accumulation of pollutants in the products is discussed. On the impact assessment level, no clear ranking of options can be derived since each option has its advantages resp. disadvantages in relation to the other. The reduced impacts of the substituted processes are decisive for the ranking of the option. The final ranking of the options is carried out by the Umweltbundesamt (UBA) based on the interpretation logic of the UBA evaluation method for eco-balances. The present study concludes with the processing and preparation of the balance results for such an interpretation (especially the standardization of the results of the impact assessment based on the total impact assessment based on the total impact in Germany). (orig.) [German] In Deutschland sind jaehrlich ca. 480.000 t Altoel, die im Rahmen der gesetzlich geregelten Altoelsammlung anfallen, zu entsorgen und zu verwerten. Vier Verwertungsverfahren fuer Altoel (Aufarbeitung zu Grundoelen; Aufarbeitung zu Brennstoffen; thermische Nutzung in Zementwerken; Druckvergasung zur Herstellung von Synthesegas bzw. Methanol) wurden anhand einer Oekobilanz bewertet. Der Bilanzraum umfasst einerseits die jeweiligen Verwertungsprozesse incl. der systembedingten Nebenprozesse (Energiebereitstellung

  11. Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

    Jorde, K.

    1997-12-31

    Fliessgewaesserbiozoenosen elementare Bedeutung hat, wurde dabei angestrebt. Unter fiktiven Mindestwasservorgaben sollte durch die modellhafte Gegenueberstellung oekologischer Folgeeffekte mit den entsprechenden wirtschaftlichen Auswirkungen fuer die Kraftwerke ein Instrumentarium geschaffen werden, das als sinnvolle, sowohl oekologisch als auch oekonomisch zielgerichtete Entscheidungshilfe bei der Bemessung und Optimierung zukuenftiger Mindestwasserauflagen dienen kann. In der Arbeit wurde erstmals die zeitliche und raeumliche Variabilitaet des sohlnahen Stroemungsmusters in einem Flussabschnitt untersucht und daraus, ergaenzt durch Habitatsimulationen, ein Verfahren zur Ermittlung oekologisch begruendeter, dynamischer Mindestwasserregelungen fuer Ausleitungsstrecken abgeleitet. FST-Halbkugel-Messungen erwiesen sich dabei als gut geeignet. Mit FST-Halbkugeln lassen sich die Sohlschubspannungen in natuerlichen Gewaessern weitaus zuverlaessiger und effektiver erfassen, als beispielsweise mit Fluegelmessungen. Mit Hilfe von CASIMIR wurden FST-Halbkugel-Untersuchungen dreier morphologisch unterschiedlicher Versuchsstrecken ausgewertet. An den daraus abgeleiteten ASS-Modellen wurden verschiedene Mindestwasserregelungen einschliesslich des derzeit bestehenden Zustandes verglichen. Drei unterschiedliche Jahre wurden dabei zugrunde gelegt. (orig./SR)

  12. Ecologically justified regulatory provisions for riverine hydroelectric power plants and minimum instream flow requirements in diverted streams; Oekologisch begruendete, dynamische Mindestwasserregelungen bei Ausleitungskraftwerken

    Jorde, K

    1998-12-31

    Fliessgewaesserbiozoenosen elementare Bedeutung hat, wurde dabei angestrebt. Unter fiktiven Mindestwasservorgaben sollte durch die modellhafte Gegenueberstellung oekologischer Folgeeffekte mit den entsprechenden wirtschaftlichen Auswirkungen fuer die Kraftwerke ein Instrumentarium geschaffen werden, das als sinnvolle, sowohl oekologisch als auch oekonomisch zielgerichtete Entscheidungshilfe bei der Bemessung und Optimierung zukuenftiger Mindestwasserauflagen dienen kann. In der Arbeit wurde erstmals die zeitliche und raeumliche Variabilitaet des sohlnahen Stroemungsmusters in einem Flussabschnitt untersucht und daraus, ergaenzt durch Habitatsimulationen, ein Verfahren zur Ermittlung oekologisch begruendeter, dynamischer Mindestwasserregelungen fuer Ausleitungsstrecken abgeleitet. FST-Halbkugel-Messungen erwiesen sich dabei als gut geeignet. Mit FST-Halbkugeln lassen sich die Sohlschubspannungen in natuerlichen Gewaessern weitaus zuverlaessiger und effektiver erfassen, als beispielsweise mit Fluegelmessungen. Mit Hilfe von CASIMIR wurden FST-Halbkugel-Untersuchungen dreier morphologisch unterschiedlicher Versuchsstrecken ausgewertet. An den daraus abgeleiteten ASS-Modellen wurden verschiedene Mindestwasserregelungen einschliesslich des derzeit bestehenden Zustandes verglichen. Drei unterschiedliche Jahre wurden dabei zugrunde gelegt. (orig./SR)

  13. 9th Saxonian radon day. 11th meeting on radon safe structural engineering; 9. Saechsischer Radontag. 11. Tagung radonsicheres Bauen

    NONE

    2015-07-01

    The proceedings of the meeting in radon-safe structural engineering covers contributions on the following issues: implementation of the EU standards, radon protection in underground cavities, radon protection at working places, reports on experiences.

  14. LITECOR {sup registered}. The new way to build lighter cars; LITECOR {sup registered}. Die neue Art, leicht zu bauen

    Boeger, Thorsten; Middelhauve, Oliver [ThyssenKrupp Steel Europe AG, Duisburg (Germany). Vertrieb Auto

    2013-11-01

    Cost, weight and performance are three central factors when it comes to building cars. Modern vehicles are expected to be affordable and light yet at the same time meet high performance and safety standards. This places increasingly high demands on the materials used. The way forward could be hybrid materials, i.e. materials such as LITECOR {sup registered}, an extremely stiff steel/polymer composite that combines the high strength of steel with the low weight of plastic and creates new opportunities for reducing weight in the car body. (orig.)

  15. Organisation eines Thesaurus für die Unterstützung der mehrsprachigen Suche in einer bibliographischen Datenbank im Bereich Planen und Bauen

    Dimitri Busch

    2016-12-01

    Full Text Available Das Problem der mehrsprachigen Suche gewinnt in der letzten Zeit immer mehr an Bedeutung, da viele nützliche Fachinformationen in der Welt in verschiedenen Sprachen publiziert werden. RSWBPlus ist eine bibliographische Datenbank zum Nachweis der Fachliteratur im Bereich Planen und Bauen, welche  deutsch- und englischsprachige Metadaten-Einträge enthält. Bis vor Kurzem war es problematisch Einträge zu finden, deren Sprache sich von der Anfragesprache unterschied. Zum Beispiel fand man auf deutschsprachige Anfragen nur deutschsprachige Einträge, obwohl die Datenbank auch potenziell nützliche englischsprachige Einträge enthielt. Um das Problem zu lösen, wurde nach einer Untersuchung bestehender Ansätze, die RSWBPlus weiterentwickelt, um eine mehrsprachige (sprachübergreifende Suche zu unterstützen, welche unter Einbeziehung eines zweisprachigen begriffbasierten Thesaurus erfolgt. Der Thesaurus wurde aus bereits bestehenden Thesauri automatisch gebildet. Die Einträge der Quell-Thesauri wurden in SKOS-Format (Simple Knowledge Organisation System umgewandelt, automatisch miteinander vereinigt und schließlich in einen Ziel-Thesaurus eingespielt, der ebenfalls in SKOS geführt wird. Für den Zugriff zum Ziel-Thesaurus werden Apache Jena und MS SQL Server verwendet. Bei der mehrsprachigen Suche werden Terme der Anfrage durch entsprechende Übersetzungen und Synonyme in Deutsch und Englisch erweitert. Die Erweiterung der Suchterme kann sowohl in der Laufzeit, als auch halbautomatisch erfolgen. Das verbesserte Recherchesystem kann insbesondere deutschsprachigen Benutzern helfen, relevante englischsprachige Einträge zu finden. Die Verwendung vom SKOS erhöht die Interoperabilität der Thesauri, vereinfacht das Bilden des Ziel-Thesaurus und den Zugriff zu seinen Einträgen.   In recent times, the problem of multi-lingual search is gaining more and more importance, because a lot of useful specialized information are published in several

  16. Ecological - open - modern. Ray Kappe's first domestic building at Santa Monica, California; Oekologisch - Offen - Modern. Ray Kappes erstes Wohnhaus in Santa Monica/Kalifornien

    Kreykenbohm, S.

    2007-07-01

    hoechste Auszeichnung als Vorreiter im energieeffizienten Bauen (Leadership in Energy and Environmental Design) LEED-Platin.

  17. Climate change and the Lower Weser region. Final report; Klimaaenderung und Unterweserregion (KLIMU) 'Fallstudie Weseraestuar'. Teilprojekt: Oekologischer Komplex. T. B: Klimasensitivitaet der Unterweser und ihrer Vorlaender. Abschlussbericht

    Osterkamp, S.; Schirmer, M.

    2000-12-01

    The climate sensitivity of the aquatic, amphibic and terrestrial compartments of the lower Weser region was analyzed. This region, located between Bremen and Bremerhaven in northern Germany, is part of a bigger natural reserve ('Unterwesermarsch'). Vegetation and land use were mapped at the biotype level, and forecasts of changes to be expected were attempted on the basis of a regionalised climate scenario. Climate-induced changes in the topology of the headlands and in the morphology of the lower Weser river could not be taken into account. [German] In der vorliegenden Arbeit (Teil B: 'Klimasensitivitaet der Unterweser und ihrer Vorlaender') des Teilprojektes Oekologischer Komplex wird die Klimasensitivitaet der aquatischen, amphibischen und terrestrischen Lebensraeume der Unterweserregion analysiert. (Die Ergebnisse der Untersuchungen der Klimasensitivitaet der Marschen sind im Abschlussbericht des Teilprojektes Oekologischer Komplex, Teil A, Kraft and Schirmer 2000 beschrieben). Das Untersuchungsgebiet, im Norden Deutschlands zwischen Bremen und Bremerhaven gelegen, stellt den inneren Teil des Naturraumes Unterwesermarsch dar. Die Vegetation und die Nutzung des Gebietes wurde flaechendeckend auf der Ebene von Biotoptypenkartierungen erfasst. Prognosen der Flaechenbilanzen und der kuenftigen Veraenderung der Biotoptypen und der Fauna des Vorlandes und der Unterweser wurden auf der Grundlage eines regionalisierten Klimaszenarios vorgenommen. Klimabedingte Veraenderungen der Topografie der Vorlandbereiche und der Morphologie der Unterweser konnten innerhalb der vorliegenden Studie nicht beruecksichtigt werden. (orig.)

  18. Environment-friendly building. Energy efficiency - thermal comfort - materials. Publication on the occasion of the 60th birthday of Gerd Hauser; Umweltbewusstes Bauen. Energieeffizienz - Behaglichkeit - Materialien. Festschrift zum 60. Geburtstag von Gerd Hauser

    Maas, A. (ed.)

    2008-07-01

    In honour of the 60th birthday of Professor Gerd Hauser, ''father of the Energy Passport'' in this festival script 38 contributions are compiled in recognition of his work. These articles present the whole thematics of heat- and energy transfer in the building sector. The broad spectra is arranged into the sections energy efficiency, thermal comfort and materials. Constructive problems on sun protection, computer-simulated models of indoor climate, energetic sanitation of monuments taking into account preservative aspects, problems of sound emission from traffic as the constructional physical evaluation of materials in the building envelope. Furtheron the actual discussion on energy saving construction is reflected due to perspective and strategies of climate policy in Germany. The spectrum of the contribution from research and practice shows clearly, that construction physics has developed since last decades from a niche position to a comprehensive branche. (orig./GL) [German] Aus Anlass des 60. Geburtstages von Professor Gerd Hauser, dem Vater des Energiepasses, sind in dieser Festschrift in Anerkennung seines Werkes 38 Beitraege zusammengestellt. Diese stellen die gesamte Thematik der Waerme- und Energieuebertragung im Gebaeudebereich vor. Das breite Spektrum ist in die Abschnitte Energieeffizienz, Behaglichkeit und Materialien gegliedert. Behandelt werden beispielsweise baukonstruktive Fragestellungen beim Sonnenschutz, Computer simulierte Raumklimamodelle, denkmalpflegerische Aspekte bei der energetischen Sanierung, Probleme der Schalluebertragung im Verkehr sowie die bauphysikalische Bewertung von Materialien der Gebaeudehuelle. Darueber hinaus wird die aktuelle Diskussion zum Energiesparenden Bauen im Hinblick auf die Perspektiven und Strategien der Klimapolitik in Deutschland wiedergegeben. Die Bandbreite der Beitraege aus Forschung und Praxis zeigen anschaulich, dass sich die Bauphysik in den letzten Jahrzehnten aus einer

  19. Ecological and economic assessment and optimisation of measures for in-house recycling in hot galvanizing plants; Oekologische und oekonomische Beurteilung und Optimierung von Massnahmen zur innerbetrieblichen Stoffkreislaufschliessung beim Feuerverzinken von Stahl

    Ackermann, R.; Fleischer, G. [TU Berlin, Inst. fuer Technischen Umweltschutz, Lehrstuhl Abfallvermeidung und Sekundaerrohstoffwirtschaft, Berlin (Germany)

    2003-07-01

    Exemplary strategies for materials use and recycling in a plant for hot galvanizing of steel are reviewed from an ecological and economic viewpoint and optimized. The changes resulting from the optimization measures are assessed in terms of cost and potential ecological effects. The results of this assessment, which is based on the methodology published in DIN EN ISO 14040 ff, illustrate the potential contained in the recycling option. (orig.) [German] Fuer das Feuerverzinken von Stahlbauteilen werden beispielhaft Strategien zur innerbetrieblichen Stoffkreislaufschliessung oekologisch und oekonomisch beurteilt und optimiert. Die sich hinsichtlich der betrieblichen Stoff- und Energiefluesse durch Optimierungsmassnahmen ergebenden Veraenderungen werden in Bezug auf die Kostensituation des Unternehmens und die oekologischen potentiellen Auswirkungen beurteilt. Die Ergebnisse der Oekologischen Betriebsoptimierung, die unter Nutzung methodischer Elemente der Oekobilanzierung (DIN EN ISO 14040 ff) erzielt werden, verdeutlichen, welche Potentiale in einer weitgehenden Schliessung des Stoffkreislaufs liegen. (orig.)

  20. Separate collection and recovery of biowaste from an ecological perspective; Die getrennte Sammlung und Verwertung von Bioabfaellen aus oekologischer Sicht

    Knappe, Florian; Vogt, Regine [IFEU - Institut fuer Energie- und Umweltforschung, Heidelberg (Germany); Hermann, Tim [Umweltbundesamt, Dessau-Rosslau (Germany). Fachgebiet Abfalltechnik, Abfalltechniktransfer

    2013-02-15

    The valuable characteristics of household biowaste are the content of plant nutrients, mainly phosphorus, and of native organic matter or carbon. Processed to compost, the application to soils can be of high ecological value. Without losses of compost quality, the process can be combined with energy production if a fermentation is integrated into the concept. Recovery systems have to be designed with optimum effects, combining high emission standards with a high effectivity, e.g. of the biogas exploitation. If this is guaranteed, the separate collection and recovery of biowastes have advantages in almost all environmental aspects compared to systems without biowaste collection. (orig.)

  1. Interim balance: Ecology. Oekologische Zwischenbilanz

    Kogon, E; Jungk, R

    1981-03-01

    The world wide ecology problem is discussed with examples of energy, transportation, chemistry, agriculture and food industry, and water supply. Destruction of nature and human discord is considered. Conservative in our political parties and their views on environmental protection are presented, including alliance between reds and 'greens''. The Rhine initiative is discussed. Lead respects no borders accounts experiences of citizens' action groups in Lothringia and the Saar district. International airport Munich-II/comments by a protestant. 'Give priority to life is hearing on environmental protection. Other subjects include: 'Green's in the Bremen Senate; policy in a hard-hearing world psychology of citizens' action groups; critical ecological research and scientific establishment; full productivity and ecology; the deluge to follow/hints on how to build an ark; symbiosis is more than coexistence/ecologists' social theory; throwing in two hundred elementary particles/on the way to an ecological concept of science; scientific journals; alternative literature; and a teaching model for a teaching subject' ecology'.

  2. Sustainable building with closed cavity facades. Top energy efficiency and more daylight; Nachhaltig bauen mit Closed Cavity Fassaden. Hoechste Energieeffizienz und mehr Tageslicht

    Rudolf, Bernhard

    2012-08-15

    Facades have a key function within the sustainable construction since the energy conservation significantly depends on the building envelope. Beside an enhanced energy efficiency, the Green Building shall offer an improved utilization of day-lighting and comfortable indoor climatic conditions. Here, the innovative Closed Cavity Facade new standards. The former 'Poseidon building' in Frankfurt/Main (Federal Republic of Germany) and the multi-storey building of the Roche company in Basel (Switzerland) are equipped with this facade. The energy costs, operational costs as well as the maintenance costs are reduced sustainably using this closed bivalved facade.

  3. Ecological valuation of mechanic-biological waste treatment and waste combustion on the basis of energy balances and air pollutant balances; Oekologische Bewertung der mechanisch-biologischen Restabfallbehandlung und der Muellverbrennung auf Basis von Energie- und Schadgasbilanzen

    Wallmann, R.

    1999-04-01

    The work aims at an ecological valuation of air pollutant emissions and energy consumption as particularly relevant aspects of waste treatment and waste combustion plants, based on new scientific results, in order to draw up ecological budgets and make system comparisons in waste treatment. The target set is particularly effectively achieved by the following: documentation and scientific derivation of relevant boundary conditions, careful surveying and data processing for the purpose of making up an ecological budget, and objective valuation and interpretation of results. The high transparency of the methodics should be emphasized. They make the results obtained conclusive and verifiable. (orig.) [Deutsch] Ziel der vorliegenden Arbeit ist die oekologische Bewertung der besonders relevanten Aspekte Abluftemissionen und Energieverbrauch von MBA und MVA auf Basis aktueller Forschungsergebnisse als Grundlage fuer Oekobilanzen und Systemvergleiche zur Restabfallbehandlung. Diese Zielvorgabe wird durch die Dokumentation und wissenschaftliche Herleitung relevanter Rahmenbedingungen, sorgfaeltige Erhebung und Aufbereitung der Daten unter Gesichtspunkten der Erstellung einer Oekobilanz und letztendlich aufgrund der objektiven Bewertung und Interpretation der Ergebnisse im besonderen Masse erreicht. Besonders hervorzuheben hierbei ist die hohe Transparenz bei der methodischen Vorgehensweise. Die ermittelten Ergebnisse sind somit nachvollziehbar und ueberpruefbar. (orig.)

  4. Sustainable construction and housing. A needs based approach for the future; Nachhaltiges Bauen und Wohnen. Ein Beduerfnisfeld fuer die Zukunft gestalten

    Vallenthin, Mark; Paffrath, Simone; Bolland, Til (comps.)

    2010-05-15

    Our way of constructing our buildings, our life-style, our housing patterns, as well as our mobility habits, increasingly place stress on the environment and endanger the basis of existence of many living creatures on this planet. Mankind can carry on ignoring the limits of tolerance of their natural environment. However, they must then learn to cope with increasing damage caused by natural catastrophes to which they have contributed. Our extensive use of raw materials pushes the limits as well. Peak-Oil will soon be reached, although the demand for oil will continue to increase strongly. Therefore, we have to dismiss our wasteful technologies, architecture, living standards and housing patterns, established during the 'fossil age'. Construction, development, use, modernisation and repair of buildings and infrastructure take up an unacceptably large amount of surface area and cause a major part of the demand for energy and raw materials in Germany. There are excellent and worthwhile alternatives to the common and familiar habits, patterns and designs. This brochure indicates how sustainable alternatives can be found in the construction and housing sector. A compilation of alternatives - the so-called 'Sustainability scenario' - provides an excellent overview of the amazingly wide spectrum we have to satisfy our housing requirements at a high level and - at the same time - wasting considerably less natural resources. The supposed measures follow the principles 'Return from greenfield to central urban areas' and 'Rather improve the fabric of existing buildings than construct new ones'. The first principle also links to other measures for a mobility less depending on oil and less harmful to our climate. Politicians, leaders of the construction and housing industry, architects, home owners and tenants can positively shape the presented spectrum. By abolishing the home building subsidy and by promoting the energy saving

  5. Closing loops for material flows in surface treatment processes. Pt. 14: ecological and economic assessment and optimization. Final report and appendix; Stoffkreislaufschliessung bei abtragenden Verfahren in Prozessloesungen. Teilprojekt 14: Oekologische und oekonomische Beurteilung und Optimierung. Endbericht und Anhang

    Fleischer, G.; Ackermann, R.; Scholz, C. [and others

    2001-09-01

    besonders ueberwachungsbeduerftige Abfaelle deponiert werden muessen. Verbesserungen der Prozesstechniken bei galvanotechnischen und metallchemischen Verfahren bieten deshalb eine wirksame Moeglichkeit, die Ursachen dieser Umweltbelastung zu verringern. Ziel dieses Teilvorhabens war es, potentielle Optimierungsmoeglichkeiten fuer die betrachteten Unternehmen oekologisch und oekonomisch zu beurteilen und bei der Optimierung mitzuwirken. Fuer dieses Teilvorhaben wurde festgelegt, im Sinne der systemanalytischen Bottom-up-Vorgehensweise zu arbeiten. Daraus ergibt sich fuer die methodische Vorgehensweise eine Ableitung des verallgemeinerungsfaehigen Instrumentes aus der Analyse der Vorgehensweisen bei den speziellen Beispielen, die als Musterloesungen bearbeitet werden. Mit der Vorgabe des methodischen Rahmens erfolgte eine Vorauswahl der methodischen Elemente aus der Oekobilanzmethode und der Betriebswirtschaftslehre. Zusaetzlich zu diesen beiden Methoden wurden zur inhaltlichen und strukturellen Gliederung verfahrenstechnische und systemanalytische Methoden angewandt. Innerhalb dieses Teilvorhabens wurde fuer die Zielerfuellung ein objektives Beurteilungs- und Optimierungsinstrument entwickelt und erprobt. Mit Hilfe dieses Instrumentes koennen Veraenderungen in einem System dahingehend beurteilt werden, ob sie in den Gesamtsystemgrenzen die oekologischen und oekonomischen Belastungen tatsaechlich reduzieren. Zur Unterstuetzung des Instrumentes wurden mehrere EDV-Programme genutzt und entwickelt. Des weiteren wurden verallgemeinerungsfaehige Prozessmodelle erarbeitet und Algorithmen zur Ermittlung und Durchsetzung von stoffflussminimierten Technologien abgeleitet und in allgemeingueltiger Weise dargestellt. (orig.)

  6. Certified ecological roofs; Oekologisch mit Praedikat

    Haslinger, Rupert

    2012-08-02

    Roofs of farm buildings are optimally suited for photovoltaic power supplies. Reimbursement for grid power supply is one interesting aspects, but electric power produced on site can also be used directly in agriculture and especially in viniculture.

  7. Presentation of results of the BMBF-sponsored project `Establishment of ecological areas in landscaping after mining`, Massen, 8 February 1996. Conference report; Ergebnispraesentation des BMBF-Foerderprojekts ``Schaffung oekologischer Vorrangflaechen bei der Gestaltung der Bergbaufolgelandschaft``, Massen, den 8. Februar 1996. Tagungsband

    NONE

    1996-02-08

    The conference report presents the results of the BMBF-sponsored research project on ecologically compatible landscape revegetation after mining in the south-western part of the Niederlausitz brown-coal mining district. The following individual topics were dealt with: the form, e.g. the relief, of the landscape to be created, different types of ground use, types of biotopes and the site conditions required in each case. The revegetation and recolonization of the dumps and tail banks with plants and invertebrates as well as with reptiles, amphibians and avifauna are further points of the project presentation. (orig.) [Deutsch] Im vorliegenden Band wird das Ergebnis des BMBF-gefoerderten Forschungsvorhaben zur Schaffung einer oekologisch vertretbaren Bergbaufolgelandschaft im Suedwesten des Niederlausitzer Braunkohlerevier erlaeutert. Im Einzelnen wird die landschaftliche Gestaltung, wie die Reliefentwicklung, die einzelnen Bodennutzungstypen sowie die Biototypen und ihrer erforderlichen Standortverhaeltnisse beschrieben. Die Wiederbesiedlung der Kippen und Halden mit Pflanzen und Wirbellosen, sowie die Ansiedlung von Reptilien, Amphibien und Voegeln sind weitere Punkte der Projektpraesentation. (orig.)

  8. Recycling-friendly planning and construction; Recyclinggerechtes Planen und Bauen

    Willkomm, W. [Hannover Univ. (Germany). Fachbereich Architektur]|[Institut fuer Industrialisierung des Bauens GmbH, Hannover (Germany)

    1995-09-01

    Building materials recycling is part and parcel of any intelligent, resource-conserving materials recycling concept. Principally, however, it can never be more than the second best solution. This is because it must always come after all has been done to prevent building material residues from arising in the first place. The greatest potential for waste avoidance in the building industry lies in the planning phase. Planning nowadays is oriented more to production, utilisation, reutilisation, maintenance, and recycling processes, i.e. more to processes in general than to the design of any certain product. (orig./HW) [Deutsch] Baustoff-Recycling ist ein unverzichtbarer Beitrag zu intelligenten, resourcensparenden Materialkreislaeufen. Es stellt aber immer nur die zweitbeste Loesung dar. Denn zunaechst muessen alle Moeglichkeiten genutzt werden. Bauabfaelle gar nicht erst entstehen zu lassen. Die groessten Potentiale zur Abfallvermeidung in der Bauproduktion liegen in einer Bauplanung, die sich intensiver als bisher an Herstellungs-, Nutzungs-, Umnutzungs-, Instandhaltungs- und Recyclingprozessen orientiert, also eher prozessorientierte Planung als Produktgestaltung. (orig./HW)

  9. Building without financial aid from the state; Bauen ohne Foerderung

    Ristau, Oliver

    2012-07-01

    While Spain is suffering from a financial crisis, a renaissance of reimbursement strategies for photovoltaic plants is highly improbable. On the other hand, solar energy now has the chance to succeed in the free market.

  10. Social indicators of sustainable building; Soziale Indikatoren des nachhaltigen Bauens

    Greiff, Rainer

    2012-06-15

    As a result of the UN Conference on Environment and Development (UNCED) in 1992 in Rio de Janeiro (''Earth Summit'') the participating nations agreed upon principles of sus-tainable development and objectives for sustainable development - the so called ''Agenda 21'' - to be pursued by national sustainability strategies and be monitored by systems of appropriate relative indicators. The participants shared the awareness that ecological objectives aiming at the global preservation of the natural resources can be achieved only if sustainable economic and social developments are considered together. Unlike the ecological demands of protection of climate and resources, for which evidence can be provided by natural sciences and that can be substantiated by figures, a common under-standing of the social dimension of sustainability has not yet emerged. The same is true for the concept of ''sustainable building''. In the guideline ''Sustainable Building'' published by the Federal Ministry of Transport, Building and Housing in 2001, essential instructions regarding the implementation of ob-jectives for ecological construction were compiled for use in practice. This guideline is now to be supplemented by objectives of social sustainability. As a basis for common understanding a definition of the social aspects of sustainable building will be brought forward, which is expected to be broadly acknowledged. Furthermore indicators for the social dimension of sustainability were to be developed so that the observance of socio-cultural aspects of sustainability may be operationalised for new construction as well as refurbishment.

  11. ['Gold standard', not 'golden standard'

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  12. Decommissioning standards

    Crofford, W.N.

    1980-01-01

    EPA has agreed to establish a series of environmental standards for the safe disposal of radioactive waste through participation in the Interagency Review Group on Nuclear Waste Management (IRG). One of the standards required under the IRG is the standard for decommissioning of radioactive contaminated sites, facilities, and materials. This standard is to be proposed by December 1980 and promulgated by December 1981. Several considerations are important in establishing these standards. This study includes discussions of some of these considerations and attempts to evaluate their relative importance. Items covered include: the form of the standards, timing for decommissioning, occupational radiation protection, costs and financial provisions. 4 refs

  13. Accounting standards

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed

  14. Standardization Documents

    2011-08-01

    Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

  15. Development and trial of methods and design concepts for an ecological recultivation of former mining areas, located in certain littoral and terrestrial areas of the Goitzsche, district of Bitterfeld, state Sachsen-Anhalt. Final report; Entwicklung und Erprobung von Methoden und Gestaltungskonzepten zur oekologisch vertraeglichen Sanierung von Bergbaufolgelandschaften in ausgewaehlten litoralen und terrestrischen Bereichen des Tagebaus Goitzsche im Landkreis Bitterfeld. Schlussbericht und Anlagen 1-12

    Haenel, K.; Herbst, F.; Mueller, E.; Prautzsch, I.

    2000-11-01

    Methods for an ecological orientated revitalisation of former brown coal open-cast mining areas in East Germany are less developed and regarded than questions about stabilisation and economic recultivation technologies. The aim of the research work was to develop a methodical concept which includes proposals for an alternate design of shore lines considering the qualities demanded by species of flora and fauna. One of the most important issues is the use of engineer-biology rather than technical methods to stabilise and design the slopes. Soil, vegetation and species of different sections of six mining lakes were therefore analysed. Certain species of animal were selected in order to plan a current recultivation project on the island called Baerenhofinsel, part of the Goitzsche (Bitterfeld/Sachsen-Anhalt). A design concept to create conditions needed by these aim species was developed and also partly realised. Unfortunately the project could not be finished completely as there was non-predictable delay in the flooding regime. Nevertheless it is an important base for the future revitalisation process of former mining areas. (orig.) [German] Im Unterschied zu Fragen der Standsicherheit und wirtschaftlicher Sanierungstechnologien sind bei der Sanierung von Bergbaufolgelandschaften des ostdeutschen Braunkohlebergbaus Methoden fuer eine oekologisch orientierte Sanierung nur ungenuegend entwickelt. Ziel des Forschungsvorhabens war es, ein Methodenkonzept zur abwechslungsreichen Gestaltung von Uferbereichen in Tagebaufolgelandschaften des Braunkohlebergbaus unter besonderer Beruecksichtigung der Lebensraumansprueche ausgewaehlter Zielarten der Flora und Fauna zu entwickeln. Das Methodenkonzept beinhaltet die Boeschungsgestaltung durch Erdbau und ingenieurbiologische Bauweisen. Es wurden Uferabschnitte an sechs Tagebauseen (Vergleichsgewaesser) bezueglich Boden, Vegetation und ausgewaehlter Tierarten untersucht. Fuer eine konkrete Sanierungsaufgabe, die Baerenhofinsel in

  16. Communications standards

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se

  17. Training Standardization

    Agnihotri, Newal

    2003-01-01

    The article describes the benefits of and required process and recommendations for implementing the standardization of training in the nuclear power industry in the United States and abroad. Current Information and Communication Technologies (ICT) enable training standardization in the nuclear power industry. The delivery of training through the Internet, Intranet and video over IP will facilitate this standardization and bring multiple benefits to the nuclear power industry worldwide. As the amount of available qualified and experienced professionals decreases because of retirements and fewer nuclear engineering institutions, standardized training will help increase the number of available professionals in the industry. Technology will make it possible to use the experience of retired professionals who may be interested in working part-time from a remote location. Well-planned standardized training will prevent a fragmented approach among utilities, and it will save the industry considerable resources in the long run. It will also ensure cost-effective and safe nuclear power plant operation

  18. Effluent standards

    Geisler, G C [Pennsylvania State University (United States)

    1974-07-01

    At the conference there was a considerable interest in research reactor standards and effluent standards in particular. On the program, this is demonstrated by the panel discussion on effluents, the paper on argon 41 measured by Sims, and the summary paper by Ringle, et al. on the activities of ANS research reactor standards committee (ANS-15). As a result, a meeting was organized to discuss the proposed ANS standard on research reactor effluents (15.9). This was held on Tuesday evening, was attended by members of the ANS-15 committee who were present at the conference, participants in the panel discussion on the subject, and others interested. Out of this meeting came a number of excellent suggestions for changes which will increase the utility of the standard, and a strong recommendation that the effluent standard (15.9) be combined with the effluent monitoring standard. It is expected that these suggestions and recommendations will be incorporated and a revised draft issued for comment early this summer. (author)

  19. Nuclear standards

    Fichtner, N.; Becker, K.; Bashir, M.

    1981-01-01

    This compilation of all nuclear standards available to the authors by mid 1980 represents the third, carefully revised edition of a catalogue which was first published in 1975 as EUR 5362. In this third edition several changes have been made. The title has been condensed. The information has again been carefully up-dated, covering all changes regarding status, withdrawal of old standards, new projects, amendments, revisions, splitting of standards into several parts, combination of several standards into one, etc., as available to the authors by mid 1980. The speed with which information travels varies and requires in many cases rather tedious and cumbersome inquiries. Also, the classification scheme has been revised with the goal of better adjustment to changing situations and priorities. Whenever it turned out to be difficult to attribute a standard to a single subject category, multiple listings in all relevant categories have been made. As in previous editions, within the subcategories the standards are arranged by organization (in Categorie 2.1 by country) alphabetically and in ascending numerical order. It covers all relevant areas of power reactors, the fuel cycle, radiation protection, etc., from the basic laws and governmental regulations, regulatory guides, etc., all the way to voluntary industrial standards and codes of pratice. (orig./HP)

  20. MATE standardization

    Farmer, R. E.

    1982-11-01

    The MATE (Modular Automatic Test Equipment) program was developed to combat the proliferation of unique, expensive ATE within the Air Force. MATE incorporates a standard management approach and a standard architecture designed to implement a cradle-to-grave approach to the acquisition of ATE and to significantly reduce the life cycle cost of weapons systems support. These standards are detailed in the MATE Guides. The MATE Guides assist both the Air Force and Industry in implementing the MATE concept, and provide the necessary tools and guidance required for successful acquisition of ATE. The guides also provide the necessary specifications for industry to build MATE-qualifiable equipment. The MATE architecture provides standards for all key interfaces of an ATE system. The MATE approach to the acquisition and management of ATE has been jointly endorsed by the commanders of Air Force Systems Command and Air Force Logistics Command as the way of doing business in the future.

  1. Climate change and the Lower Weser region: Direct and indirect consequences of a climate change for the ecological situation in the Weser, the forelands and in the diked marshes. Final report; Klimaaenderung und Unterweserregion (KLIMU) 'Fallstudie Weseraestuar'. Direkte und indirekte Auswirkungen eines Klimawandels auf die oekologischen Verhaeltnisse in Weser, Vorland und Binnendeichsmarschen. Teilprojekt Oekologischer Komplex. T. A: Binnenland. Abschlussbericht

    Kraft, D.; Schirmer, M.

    2001-03-01

    barrier or the reinforcement of the dikes) or in restrictions for the utilisation within storm surge relief polders. The possible future evolution of agriculture, as scetched in 'future scenarios', would - in case of intensification- be in contrast to the climate induced landscape evolution and act as a conflict promoter, whereas an extensification would be in line with landscape development and act reducing conflicts. (orig.) [German] Im Teilprojekt 'Oekologischer Komplex' des Verbundvorhabens 'Klimaaenderung und Unterweserregion' (KLIMU), ehemals 'Fallstudie Weseraestuar', werden die oekologischen Folgen eines Klimawandels fuer die Unterweser, die tidebeeinflussten Vorlaender und die eingedeichten Marschen abgeschaetzt. Fuer die Beschreibung des oekologischen Zustandes des Untersuchungsgebietes werden flaechendeckend die Biotoptypen nach DRACHENFELS aufgenommen und in einem GIS (ARC View/ARC Info) abgebildet, ergaenzt u.a. um Reliefdaten, Schutzstatus, landwirtschaftliche Nutzung und Bodenparameter. Wirkt auf diesen landschaftsoekologischen Status quo ein definiertes Zukunftsklima (Klimaszenario) mit +55 cm Meeresspiegel, +30 cm Tidehub, erhoehtem Jahresniederschlag (im Sommer -6%.) und um 2,7 C erhoehter Jahresmitteltemperatur ein, so ergeben sich die folgenden Auswirkungen (ohne Beruecksichtigung morphologischer Anpassung im Vorland), dargestellt im Abschlussbericht Teil A fuer die eingedeichte Marsch, und im Teil B fuer die Unterweser und die Vorlaender: die Flachwasserzonen in der Unterweser nehmen um 29%, die Wattflaechen um 55% und die Tideroehrichte um 250% zu; das unbedeichte Gruenland verliert seine landwirtschaftliche Nutzbarkeit und geht um 30% zurueck. CO{sub 2}- und Temperaturzunahme lassen die Biomasse des Roehrichts um bis zu 25% ansteigen, die Einwanderung von Neophyten und Neozoen wird beschleunigt. Insgesamt ergeben sich im Vorland naturnaehere Verhaeltnisse. Auch in der eingedeichten Marsch foerdert die erhoehte

  2. Frequency standards

    Riehle, Fritz

    2006-01-01

    Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

  3. Relevant Standards

    .86: Ethernet over LAPS. Standard in China and India. G.7041: Generic Framing Procedure (GFP). Supports Ethernet as well as other data formats (e.g., Fibre Channel); Protocol of ... IEEE 802.3x for flow control of incoming Ethernet data ...

  4. Achieving Standardization

    Henningsson, Stefan

    2014-01-01

    International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...

  5. Achieving Standardization

    Henningsson, Stefan

    2016-01-01

    International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...

  6. Standard Fortran

    Marshall, N.H.

    1981-01-01

    Because of its vast software investment in Fortran programs, the nuclear community has an inherent interest in the evolution of Fortran. This paper reviews the impact of the new Fortran 77 standard and discusses the projected changes which can be expected in the future

  7. Building for a post-fossil era. Sustainable construction and operation of buildings; Bauen fuer die nachfossile Aera. Nachhaltiges Bauen und Betreiben von Gebaeuden

    Daniels, Klaus [HL Beratungs- und Beteiligungs GmbH, Muenchen (Germany)

    2009-07-01

    The challenges of the 21st century will mostly be the result of the exploding world population, i.e. increasing instability because of the unequal distribution of wealth, fights over raw materials that are getting scarce, and the destruction of our natural resources. Increasingly, decision-makers are getting aware of the problems. This has consequences also for the process of building construction. For example, sustainability will be given greater attention in projecting and operation of buildings. (orig.)

  8. The Dynamics of Standardization

    Brunsson, Nils; Rasche, Andreas; Seidl, David

    2012-01-01

    This paper suggests that when the phenomenon of standards and standardization is examined from the perspective of organization studies, three aspects stand out: the standardization of organizations, standardization by organizations and standardization as (a form of) organization. Following a comp...

  9. Standards for Standardized Logistic Regression Coefficients

    Menard, Scott

    2011-01-01

    Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

  10. Instant standard concept for data standards development

    Folmer, Erwin Johan Albert; Kulcsor, Istvan Zsolt; Roes, Jasper

    2013-01-01

    This paper presents the current results of an ongoing research about a new data standards development concept. The concept is called Instant Standard referring to the pressure that is generated by shrinking the length of the standardization process. Based on this concept it is estimated that the

  11. Malaysian NDT standards

    Khazali Mohd Zin

    2001-01-01

    In order to become a developed country, Malaysia needs to develop her own national standards. It has been projected that by the year 2020, Malaysia requires about 8,000 standards (Department of Standard Malaysia). Currently more than 2,000 Malaysian Standards have been gazette by the government which considerably too low before tire year 2020. NDT standards have been identified by the standard working group as one of the areas to promote our national standards. In this paper the author describes the steps taken to establish the Malaysian very own NDT standards. The project starts with the establishment of radiographic standards. (Author)

  12. Energy efficient and solar construction. Themes 2008; Energieeffizientes und solares Bauen. Themen 2008

    Stadermann, Gerd (ed.)

    2009-04-15

    Within the annual meeting of the Renewable Energy Research Association (Berlin, Federal Republic of Germany) at 29th to 30th September, 2008, the lectures were held to the following themes: (a) Energy efficient and solar construction - a change of paradigm; (b) Revolution in construction technology; (c) Energetic sanitation of old buildings; (d) Innovative technologies of energy supply; (e) Integrated facility management; (f) Demonstration and practice of new technologies; (g) Market, politics, and sustainability.

  13. The future of building and living; Zukunft des Bauens und Wohnens

    Scharp, Michael

    2011-06-15

    What is the future of building and living? The author of the contribution under cionsideration attempts to answer this question. Under this aspect, the author identifies general trends affecting the future of building and living using an Internet research, a literature review and the evaluation of research projects of the Institute for Futures Studies and Technology Assessment (Berlin, Federal Republic of Germany). The following priorities are considered: construction and living for the residential sector, socio-demographic developments, intelligent living, technology attitudes and building energy technology. Subsequently, the trends are evaluated and discussed at a workshop. The 32 identified trends range from the development of new residential construction, the needs of older generations, the use of a smart home solutions and the use of efficient heating systems.

  14. Building in the Swiss Alps is demanding; Bauen in den Alpen ist anspruchsvoll

    Menti, U.-P.; Pluess, I; Sulzer, M.

    2007-07-01

    This article examines the high requirements placed on the construction of buildings in alpine areas. In particular, the requirements placed by the new Monte-Rosa mountaineers' lodge and the new revolving restaurant on top of the Hohen Kasten mountain in Switzerland are examined. The demanding requirements placed on the building-technological and energy aspects of such alpine buildings are looked at. Energy production and storage aspects and energy use are discussed and the use of well-tried conventional technology is noted. Also, the importance of carrying out simulations of the systems is stressed.

  15. Building with wood: A contribution to ecological building technology?; Holzbauweise: Ein Beitrag zum oekologischen Bauen?

    Kubina, A. [Oberste Baubehoerde im Bayerischen Staatsministerium des Innern, Muenchen (Germany)

    1995-09-01

    The present paper reports on double-story wooden system buildings in Bavaria in the Federal German Republic. The plans of nine different architectural offices from home and abroad are discussed. (HW) [Deutsch] Es wird berichtet ueber zweigeschossige Holzsystembauten im Freistaat Bayern (Bundesrepublik Deutschland). Diskutiert werden die Entwuerfe von 9 Architekturbueros aus dem In- und Ausland. (HW)

  16. Efficient energy use and solar building construction; Rationelle Energieverwendung und Solares Bauen

    Ebert, H.P. [Bayerisches Zentrum fuer Angewandte Energieforschung e.V., Wuerzburg (Germany)

    2007-06-15

    Houses for the 21st century must be optimised in terms of energy saving and, particularly in our latitudes, thermal insulation in the winter. These requirements can be met using innovative heat insulation systems and heat storage components. Recent developments for opaque insulation include super-insulating vacuum insulation panels, while for transparent applications there is ongoing development work on vacuum glazing. Ensuring a high solar input during the cold season and efficient protection against overheating in the warm season falls within the scope of architectural design. It can be facilitated by the use of building components made of micro or macro-integrated latent heat storage materials.

  17. Research for energy optimized building. Status seminar; Forschung fuer Energieoptimiertes Bauen. Statusseminar

    NONE

    2009-07-01

    Within the meeting of the Project Management Juelich (Juelich, Federal Republic of Germany) and the Bavarian Centre for Applied Energy Research (Wuerzburg, Federal Republic of Germany) between 30th June and 2nd July, 2009, in Wuerzburg the following lectures were held: (1) Optically switchable layers with tungsten oxide (Andreas Georg); (2) Functional coatings for application on outer surfaces of glazings (Hansjoerg Weis); (3) Functional coatings and application (Thomas Hofmann); (4) Thermal insulation in the 21st century: Vacuum-insulation panel and vacuum-isolation glasses (Ulrich Heinemann, Helmut Weinlaeder, Hans-Peter Ebert); (5) Textile composites using thermal insulation composites as an example (Alexandra Saur, Jan Beringer, Andreas Holm, Klaus Sedlbauer); (6) Design of membranes for the enhancement of the energy efficiency in buildings (Jochen Manara et al.); (7) Design of membranes for the energetic sanitation of buildings (Werner Lang et al.); (8) Total energetic analysis of complex HLK systems for buildings (Wolfgang Richter); (9) Review on hybrid aeration systems (Dirk Mueller et al.); (10) IEA SHC-Task 38 (Operating Agent) - Energy efficient cooling and dehumidification (ECOS) (Hans-Martin Henning, Alexander Morgenstern, Constanze Bongs); (11) Air quality controlled aeration of building (Jens Knissel, Marc Grossklos); (12) Development of a solar driven refrigerating absorber / heat pump with a ice storage (Thomas Brendel, Marco Zetzsche, Hans Mueller-Steinhagen); (13) Heat pumps field test 'WP efficiency' - interim results (Marek Miara); (14) ECBCS Annex 49 Low Exergy Systems for High-Performance Buildings and Communities (Dietrich Schmidt, Marlen Schurig); (15) Aquifer storage for the heat supply and cold supply of buildings (Sefan Kranz et al.); (16) Evaluation and optimization of operation of systems for the seasonal heat storage and cold storage in the foundations of office buildings (Herdis Kipry, Franziska Bockelmann, M. Norbert Fisch); (17) Quality assurance for geothermal probes for heating and cooling (Manfred Reuss, Markus Proell, Roland Koenigsdorff); (18) Phase change fluids for heat storage in the air conditioning of buildings (Stefan Gschwander, Peter Schossig); (19) Thermochemical storages for heating, air conditioning and dehumidification (Andreas Hauer); (20) A survey of solar storage applications (Klaus Vajen et al.); (21) Application of phase change materials (PCM) in the construction of wooden buildings in order to avoid an overheating in summer (Christoph Kempkes, Stephan Schlitzberger); (22) The air cross-flowed boulders storage - Innovation in the aeration of buildings (Mario Reichel, Ronny Stieber); (23) GeoTU6 - Utilization of geotheremal energy in tunnels in the areas of cities using the tram system tunnel Stuttgart-Fasanenhof (U69) as an example (Marcus Schneider et al.); (24) A simulation-based automation and optimization of operation (Ursula Eicker et al.); (25) Model-based operation analysis of buildings - Methods for the recognition of mistakes and optimization in the facility management (Christian Neumann, Dirk Jacob); (26) Optimization of operation of university buildings (Werner Jensch et al.); (27) EnBop - Energetic optimization of operation (Stefan Plesser, M. Norbert Fisch); (27) Monitoring at DVZ Barnim in Eberswalde (Tobias Haeusler); (28) Joint project: An energy optimized illumination at simultaneous improvement of the life quality using daylight and new lamp technology and series technology (Heinrich Kaase et al.).

  18. Building when the climate gets warmer; Bauen, wenn das Klima waermer wird - Schlussbericht

    Brunner, C. U. [Energieplaner, CUB Architektur Energie Umwelt, Zuerich (Switzerland); Steinemann, U. [Ingenieurbuero Urs Steinemann, Wollerau (Switzerland); Nipkow, J. [Arena, Arbeitsgemeinschaft Energie-Alternativen, Zuerich (Switzerland)

    2007-07-01

    This final report for the Swiss Federal Office of Energy (SFOE), takes a look at how the building process will have to take account of climate change with higher summer temperatures in Switzerland. The authors consider the situation as being in strong contrast to the past in Switzerland, when attention was devoted to energy demand in buildings during the winter. Today there is a new focus with the anticipation of increasingly frequent, extended hot spells in summer. The goal of this investigation is to analyse and present economic measures to assure a high level of summer comfort with a reduced demand for electricity under these changing conditions. Strategies with respect to construction, technology and operation are addressed. The current spread of technically questionable and inefficient room air conditioning units in residential and commercial buildings is considered as being strongly reminiscent of a dangerous, analogous case in the past, when small electric heaters became widespread. A largely untapped potential exists for increasing the efficiency of air conditioning and chiller technologies for both central systems and room units by the careful use of small temperature differences. Several new and unconventional solution paths are discussed, including high-efficiency room air conditioners, solar cooling equipment, balanced mechanical ventilation, phase-change materials, thermal storage, etc., all aimed at reducing electricity consumption. The expected additional electricity demand of around 1.9 TWh annually for ventilation and air conditioning is commented on.

  19. The International Standards Organisation offshore structures standard

    Snell, R.O.

    1994-01-01

    The International Standards Organisation has initiated a program to develop a suite of ISO Codes and Standards for the Oil Industry. The Offshore Structures Standard is one of seven topics being addressed. The scope of the standard will encompass fixed steel and concrete structures, floating structures, Arctic structures and the site specific assessment of mobile drilling and accommodation units. The standard will use as base documents the existing recommended practices and standards most frequently used for each type of structure, and will develop them to incorporate best published and recognized practice and knowledge where it provides a significant improvement on the base document. Work on the Code has commenced under the direction of an internationally constituted sub-committee comprising representatives from most of the countries with a substantial offshore oil and gas industry. This paper outlines the background to the code and the format, content and work program

  20. Standard Industry Fare Level

    Department of Transportation — Standard Industry Fare Level was establish after airline deregulation to serve as the standard against which a statutory zone of operating expense reasonableness was...

  1. Standard Reference Tables -

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  2. Standards for holdup measurement

    Zucker, M.S.

    1982-01-01

    Holdup measurement, needed for material balance, depend intensively on standards and on interpretation of the calibration procedure. More than other measurements, the calibration procedure using the standard becomes part of the standard. Standards practical for field use and calibration techniques have been developed. While accuracy in holdup measurements is comparatively poor, avoidance of bias is a necessary goal

  3. Creating standards: Creating illusions?

    Linneberg, Mai Skjøtt

    written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

  4. Collaboration Between Multistakeholder Standards

    Rasche, Andreas; Maclean, Camilla

    Public interest in corporate social responsibility (CSR) has resulted in a wide variety of multistakeholder CSR standards in which companies can choose to participate. While such standards reflect collaborative governance arrangements between public and private actors, the market for corporate...... responsibility is unlikely to support a great variety of partly competing and overlapping standards. Increased collaboration between these standards would enhance both their impact and their adoption by firms. This report examines the nature, benefits, and shortcomings of existing multistakeholder standards...

  5. Standardisation in standards

    McDonald, J. C.

    2012-01-01

    The following observations are offered by one who has served on national and international standards-writing committees and standards review committees. Service on working groups consists of either updating previous standards or developing new standards. The process of writing either type of document proceeds along similar lines. The first order of business is to recognise the need for developing or updating a standard and to identify the potential user community. It is also necessary to ensure that there is a required number of members willing to do the writing. A justification is required as to why a new standard should be developed, and this is written as a new work item proposal or a project initiation notification system form. This document must be filed officially and approved, and a search is then undertaken to ensure that the proposed new standard will not duplicate a standard that has already been published or is underway in another standards organisation. (author)

  6. Nuclear standardization development study

    Pan Jianjun

    2010-01-01

    Nuclear industry is the important part of national security and national economic development is key area of national new energy supported by government. nuclear standardization is the important force for nuclear industry development, is the fundamental guarantee of nuclear safe production, is the valuable means of China's nuclear industry technology to the world market. Now nuclear standardization faces to the new development opportunity, nuclear standardization should implement strategy in standard system building, foreign standard research, company standard building, and talented people building to meet the requirement of nuclear industry development. (author)

  7. Some considerations about standardization

    Dewez, Ph L; Fanjas, Y R [C.E.R.C.A., Romans (France)

    1985-07-01

    Complete standardization of research reactor fuel is not possible. However the transition from HEU to LEU should be an opportunity for a double effort towards standardization and optimization in order to reduce cost. (author)

  8. BTS statistical standards manual

    2005-10-01

    The Bureau of Transportation Statistics (BTS), like other federal statistical agencies, establishes professional standards to guide the methods and procedures for the collection, processing, storage, and presentation of statistical data. Standards an...

  9. Dental Assisting Program Standards.

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the dental assisting program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program…

  10. Some considerations about standardization

    Dewez, Ph.L.; Fanjas, Y.R.

    1985-01-01

    Complete standardization of research reactor fuel is not possible. However the transition from HEU to LEU should be an opportunity for a double effort towards standardization and optimization in order to reduce cost. (author)

  11. The Distance Standard Deviation

    Edelmann, Dominic; Richards, Donald; Vogel, Daniel

    2017-01-01

    The distance standard deviation, which arises in distance correlation analysis of multivariate data, is studied as a measure of spread. New representations for the distance standard deviation are obtained in terms of Gini's mean difference and in terms of the moments of spacings of order statistics. Inequalities for the distance variance are derived, proving that the distance standard deviation is bounded above by the classical standard deviation and by Gini's mean difference. Further, it is ...

  12. Making standards work

    Stigzelius, Ingrid

    2009-01-01

    Social and environmental standards can function as tools for companies that want to improve their conduct in social and environmental areas in the supply chain. However, relatively little attention has been given to how the adoption of social and environmental standards may influence the actual business practices in the supply chain. The overall aim of this thesis is to examine the institutional context surrounding the adoption of social and environmental standards and how these standards inf...

  13. Standards, the users perspective

    Nason, W.D.

    1993-01-01

    The term standard has little meaning until put into the proper context. What is being standardized? What are the standard conditions to be applied? The list of questions that arise goes on and on. In this presentation, answers to these questions are considered in the interest of providing a basic understanding of what might be useful to the electrical power industry in the way of standards and what the limitations on application of them would be as well. 16 figs

  14. Radiological Control Technician: Standardized technician Qualification Standard

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  15. Quality of semantic standards

    Folmer, Erwin Johan Albert

    2012-01-01

    Little scientific literature addresses the issue of quality of semantic standards, albeit a problem with high economic and social impact. Our problem survey, including 34 semantic Standard Setting Organizations (SSOs), gives evidence that quality of standards can be improved, but for improvement a

  16. Automotive Technology Skill Standards

    Garrett, Tom; Asay, Don; Evans, Richard; Barbie, Bill; Herdener, John; Teague, Todd; Allen, Scott; Benshoof, James

    2009-01-01

    The standards in this document are for Automotive Technology programs and are designed to clearly state what the student should know and be able to do upon completion of an advanced high-school automotive program. Minimally, the student will complete a three-year program to achieve all standards. Although these exit-level standards are designed…

  17. Calibration of Flick standards

    Thalmann, Ruedi; Spiller, Jürg; Küng, Alain; Jusko, Otto

    2012-01-01

    Flick standards or magnification standards are widely used for an efficient and functional calibration of the sensitivity of form measuring instruments. The results of a recent measurement comparison have shown to be partially unsatisfactory and revealed problems related to the calibration of these standards. In this paper the influence factors for the calibration of Flick standards using roundness measurement instruments are discussed in detail, in particular the bandwidth of the measurement chain, residual form errors of the device under test, profile distortions due to the diameter of the probing element and questions related to the definition of the measurand. The different contributions are estimated using simulations and are experimentally verified. Also alternative methods to calibrate Flick standards are investigated. Finally the practical limitations of Flick standard calibration are shown and the usability of Flick standards both to calibrate the sensitivity of roundness instruments and to check the filter function of such instruments is analysed. (paper)

  18. Requirements of quality standards

    Mueller, J.

    1977-01-01

    The lecture traces the development of nuclear standards, codes, and Federal regulations on quality assurance (QA) for nuclear power plants and associated facilities. The technical evolution of the last twelve years, especially in the area of nuclear technology, led to different activities and regulatory initiatives, and the present result is: several nations have their own homemade standards. The lecture discusses the former and especially current activities in standard development, and gives a description of the requirements of QA-standards used in USA and Europe, especially Western Germany. Furthermore the lecture attempts to give a comparison and an evaluation of the international quality standards from the author's viewpoint. Finally the lecture presents an outlook for the future international implications of QA-standards. There is an urgent need within the nuclear industry for simplification and standardization of QA-standards. The relationship between the various standards, and the applicability of the standards need clarification and a better transparancy. To point out these problems is the purpose of the lecture. (orig.) [de

  19. Beyond the standard model

    Wilczek, F.

    1993-01-01

    The standard model of particle physics is highly successful, although it is obviously not a complete or final theory. In this presentation the author argues that the structure of the standard model gives some quite concrete, compelling hints regarding what lies beyond. Essentially, this presentation is a record of the author's own judgement of what the central clues for physics beyond the standard model are, and also it is an attempt at some pedagogy. 14 refs., 6 figs

  20. Standard Model processes

    Mangano, M.L.; Aguilar-Saavedra, Juan Antonio; Alekhin, S.; Badger, S.; Bauer, C.W.; Becher, T.; Bertone, V.; Bonvini, M.; Boselli, S.; Bothmann, E.; Boughezal, R.; Cacciari, M.; Carloni Calame, C.M.; Caola, F.; Campbell, J.M.; Carrazza, S.; Chiesa, M.; Cieri, L.; Cimaglia, F.; Febres Cordero, F.; Ferrarese, P.; D'Enterria, D.; Ferrera, G.; Garcia i Tormo, X.; Garzelli, M.V.; Germann, E.; Hirschi, V.; Han, T.; Ita, H.; Jäger, B.; Kallweit, S.; Karlberg, A.; Kuttimalai, S.; Krauss, F.; Larkoski, A.J.; Lindert, J.; Luisoni, G.; Maierhöfer, P.; Mattelaer, O.; Martinez, H.; Moch, S.; Montagna, G.; Moretti, M.; Nason, P.; Nicrosini, O.; Oleari, C.; Pagani, D.; Papaefstathiou, A.; Petriello, F.; Piccinini, F.; Pierini, M.; Pierog, T.; Pozzorini, S.; Re, E.; Robens, T.; Rojo, J.; Ruiz, R.; Sakurai, K.; Salam, G.P.; Salfelder, L.; Schönherr, M.; Schulze, M.; Schumann, S.; Selvaggi, M.; Shivaji, A.; Siodmok, A.; Skands, P.; Torrielli, P.; Tramontano, F.; Tsinikos, I.; Tweedie, B.; Vicini, A.; Westhoff, S.; Zaro, M.; Zeppenfeld, D.; CERN. Geneva. ATS Department

    2017-06-22

    This report summarises the properties of Standard Model processes at the 100 TeV pp collider. We document the production rates and typical distributions for a number of benchmark Standard Model processes, and discuss new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.

  1. International Construction Measurement Standard

    Mitchell, Charles

    2016-01-01

    The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports...

  2. Standard NIM instrumentation system

    1990-05-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID-20893 (Rev. 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice

  3. Towards common technical standards

    Rahmat, H.; Suardi, A.R.

    1993-01-01

    In 1989, PETRONAS launched its Total Quality Management (TQM) program. In the same year the decision was taken by the PETRONAS Management to introduce common technical standards group wide. These standards apply to the design, construction, operation and maintenance of all PETRONAS installations in the upstream, downstream and petrochemical sectors. The introduction of common company standards is seen as part of an overall technical management system, which is an integral part of Total Quality Management. The Engineering and Safety Unit in the PETRONAS Central Office in Kuala Lumpur has been charged with the task of putting in place a set of technical standards throughout PETRONAS and its operating units

  4. The Standard Model course

    CERN. Geneva HR-RFA

    2006-01-01

    Suggested Readings: Aspects of Quantum Chromodynamics/A Pich, arXiv:hep-ph/0001118. - The Standard Model of Electroweak Interactions/A Pich, arXiv:hep-ph/0502010. - The Standard Model of Particle Physics/A Pich The Standard Model of Elementary Particle Physics will be described. A detailed discussion of the particle content, structure and symmetries of the theory will be given, together with an overview of the most important experimental facts which have established this theoretical framework as the Standard Theory of particle interactions.

  5. Flight Standards Automation System -

    Department of Transportation — FAVSIS supports Flight Standards Service (AFS) by maintaining their information on entities such as air carriers, air agencies, designated airmen, and check airmen....

  6. Position paper on standardization

    1991-04-01

    The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

  7. 77 FR 43542 - Cost Accounting Standards: Cost Accounting Standards 412 and 413-Cost Accounting Standards...

    2012-07-25

    ... rule that revised Cost Accounting Standard (CAS) 412, ``Composition and Measurement of Pension Cost... Accounting Standards: Cost Accounting Standards 412 and 413--Cost Accounting Standards Pension Harmonization Rule AGENCY: Cost Accounting Standards Board, Office of Federal Procurement Policy, Office of...

  8. State Skill Standards: Welding

    Pointer, Mike; Naylor, Randy; Warden, John; Senek, Gene; Shirley, Charles; Lefcourt, Lew; Munson, Justin; Johnson, Art

    2005-01-01

    The Department of Education has undertaken an ambitious effort to develop statewide occupational skill standards. The standards in this document are for welding programs and are designed to clearly state what the student should know and be able to do upon completion of an advanced high-school program. The writing team determined that any statewide…

  9. State Skill Standards: Photography

    Howell, Frederick; Reed, Loretta; Jensen, Capra; Robison, Gary; Taylor, Susan; Pavesich, Christine

    2007-01-01

    The Department of Education has undertaken an ambitious effort to develop statewide skill standards for all content areas in career and technical education. The standards in this document are for photography programs and are designed to clearly state what the student should know and be able to do upon completion of an advanced high-school program.…

  10. How many standards?

    Maegaard, Marie

    2009-01-01

    Discussions of standardisation and standard languages has a long history in linguistics. Tore Kristiansen has contributed to these discussions in various ways, and in this chapter I will focus on his claim that young Danes operate with two standards, one for the media and one for the school...

  11. Environmental radiation standards

    Kocher, D.C.

    1987-01-01

    This document contains an outline of an oral presentation on environmental radiation standards presented to the American Nuclear Societies' Topical Conference on Population Exposure from the Nuclear Fuel Cycle. The paper contains several definitions, a summary of current radiation exposure limits; and numerous proposed changes to current standards. 7 figs

  12. The Genomic Standards Consortium

    Field, Dawn; Amaral-Zettler, Linda; Cochrane, Guy

    2011-01-01

    Standards Consortium (GSC), an open-membership organization that drives community-based standardization activities, Here we provide a short history of the GSC, provide an overview of its range of current activities, and make a call for the scientific community to join forces to improve the quality...

  13. Weston Standard battery

    This is a Weston AOIP standard battery with its calibration certificate (1956). Inside, the glassware forms an "H". Its name comes from the British physicist Edward Weston. A standard is the materialization of a given quantity whose value is known with great accuracy.

  14. Surface soil contamination standards

    Boothe, G.F.

    1979-01-01

    The purpose of this document is to define surface soil contamination limits for radioactive materials below which posting, restrictions and environmental controls are not necessary in order to protect personnel and the environment. The standards can also be used to determine if solid waste or other material is contaminated relative to disposal requirements. The derivation of the standards is given

  15. Standard classification: Physics

    1977-01-01

    This is a draft standard classification of physics. The conception is based on the physics part of the systematic catalogue of the Bayerische Staatsbibliothek and on the classification given in standard textbooks. The ICSU-AB classification now used worldwide by physics information services was not taken into account. (BJ) [de

  16. Governing through standards

    Brøgger, Katja

    This abstract adresses the ways in which new education standards have become integral to new modes of education governance. The paper explores the role of standards for accelerating the shift from national to transnational governance in higher education. Drawing on the case of higher education...

  17. Environmental radiation protection standards

    Richings, L.D.G.; Morley, F.; Kelley, G.N.

    1978-04-01

    The principles involved in the setting of radiological protection standards are reviewed, and the differences in procedures used by various countries in implementing them are outlined. Standards are taken here to mean the specific numerical limits relating to radiation doses to people or to amounts of radioactive material released into the environment. (author)

  18. Standards and Professional Development

    Zengler, Cynthia J.

    2017-01-01

    The purpose of this paper is to describe the professional development that has taken place in conjunction with Ohio adopting the College and Career Readiness (CCR) Standards. The professional development (PD) has changed over time to include not only training on the new standards and lesson plans but training on the concepts defined in the…

  19. Evaluating Living Standard Indicators

    Birčiaková Naďa

    2015-09-01

    Full Text Available This paper deals with the evaluation of selected available indicators of living standards, divided into three groups, namely economic, environmental, and social. We have selected six countries of the European Union for analysis: Bulgaria, the Czech Republic, Hungary, Luxembourg, France, and Great Britain. The aim of this paper is to evaluate indicators measuring living standards and suggest the most important factors which should be included in the final measurement. We have tried to determine what factors influence each indicator and what factors affect living standards. We have chosen regression analysis as our main method. From the study of factors, we can deduce their impact on living standards, and thus the value of indicators of living standards. Indicators with a high degree of reliability include the following factors: size and density of population, health care and spending on education. Emissions of carbon dioxide in the atmosphere also have a certain lower degree of reliability.

  20. A case of standardization?

    Rod, Morten Hulvej; Høybye, Mette Terp

    2016-01-01

    the ones envisioned by the makers of standards. In 2012, the Danish National Health Authorities introduced a set of health promotion guidelines that were meant to guide the decision making and priority setting of Denmark's 98 local governments. The guidelines provided recommendations for health promotion...... and standardization. It remains an open question whether or not the guidelines lead to more standardized policies and interventions, but we suggest that the guidelines promote a risk factor-oriented approach as the dominant frame for knowledge, reasoning, decision making and priority setting in health promotion. We...

  1. The Standard Model

    Sutton, Christine

    1994-01-01

    The initial evidence from Fermilab for the long awaited sixth ('top') quark puts another rivet in the already firm structure of today's Standard Model of physics. Analysis of the Fermilab CDF data gives a top mass of 174 GeV with an error of ten per cent either way. This falls within the mass band predicted by the sum total of world Standard Model data and underlines our understanding of physics in terms of six quarks and six leptons. In this specially commissioned overview, physics writer Christine Sutton explains the Standard Model

  2. Wireless installation standard

    Lim, Hwang Bin

    2007-12-01

    This is divided six parts which are radio regulation law on securing of radio resource, use of radio resource, protection of radio resource, radio regulation enforcement ordinance with securing, distribution and assignment of radio regulation, radio regulation enforcement regulation on utility of radio resource and technical qualification examination, a wireless installation regulation of technique standard and safety facility standard, radio regulation such as certification regulation of information communicative machines and regulation of radio station on compliance of signal security, radio equipment in radio station, standard frequency station and emergency communication.

  3. Operator licensing examiner standards

    1993-01-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes

  4. International radiofrequency standards

    Lincoln, J.

    2001-01-01

    Of the various radiofrequency standards in use around the world, many are based on or similar to the Guidelines published by ICNIRP (The International Commission on Non-ionising Radiation Protection). This organisation is a working group operating in co-operation with the Environmental Health division of the World Health Organisation (WHO). This paper presents a very brief overview of current international standards, beginning with a summary of the salient points of the ICNIRP Guidelines. It should be remembered that these are guidelines only and do not exist as a separate standard. Copyright (2001) Australasian Radiation Protection Society Inc

  5. Beyond the standard model

    Gaillard, M.K.

    1990-04-01

    The unresolved issues of the standard model are reviewed, with emphasis on the gauge hierarchy problem. A possible mechanism for generating a hierarchy in the context of superstring theory is described. 24 refs

  6. Fiber optics standard dictionary

    Weik, Martin H

    1997-01-01

    Fiber Optics Vocabulary Development In 1979, the National Communications System published Technical InfonnationBulle­ tin TB 79-1, Vocabulary for Fiber Optics and Lightwave Communications, written by this author. Based on a draft prepared by this author, the National Communications System published Federal Standard FED-STD-1037, Glossary of Telecommunications Terms, in 1980 with no fiber optics tenns. In 1981, the first edition of this dictionary was published under the title Fiber Optics and Lightwave Communications Standard Dictionary. In 1982, the then National Bureau of Standards, now the National Institute of Standards and Technology, published NBS Handbook 140, Optical Waveguide Communications Glossary, which was also published by the General Services Admin­ istration as PB82-166257 under the same title. Also in 1982, Dynamic Systems, Inc. , Fiberoptic Sensor Technology Handbook, co-authored and edited by published the this author, with an extensive Fiberoptic Sensors Glossary. In 1989, the handbook w...

  7. FDA Recognized Consensus Standards

    U.S. Department of Health & Human Services — This database consists of those national and international standards recognized by FDA which manufacturers can declare conformity to and is part of the information...

  8. FREIGHT CONTAINER LIFTING STANDARD

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  9. 3G Standards

    Saugstrup, Dan; Henten, Anders

    2006-01-01

    Purpose – The main purpose of this paper is to analyze which standard/technology will win the 3G mobile markets. In addition, two sub topics are examined. First, which kind of victory will it be – will one technological solution be all-dominating or is co-existence more likely? Second, which....... Originality/value – The paper is based on the understanding that a vast array of different factors in a complex dynamic environment goes into the determination of the outcome of such standardization games. However, the battle between 3G standards has already reached a level, where relatively certain...... predictions can be made. And, the paper contributes with a methodologically based discussion concerning the outcome of the battle between 3G standards....

  10. State Air Quality Standards.

    Pollution Engineering, 1978

    1978-01-01

    This article presents in tabular form the air quality standards for sulfur dioxide, carbon monoxide, nitrogen dioxide, photochemicals, non-methane hydrocarbons and particulates for each of the 50 states and the District of Columbia. (CS)

  11. SOFG: Standards requirements

    Gerganov, T.; Grigorov, S.; Kozhukharov, V.; Brashkova, N.

    2005-01-01

    It is well-known that Solid Oxide Fuel Cells will have industrial application in the nearest future. In this context, the problem of SOFC materials and SOFC systems standardization is of high level of priority. In the present study the attention is focused on the methods for physical and chemical characterization of the materials for SOFC components fabrication and about requirements on single SOFC cells tests. The status of the CEN, ISO, ASTM (ANSI, ASSN) and JIS class of standards has been verified. Standards regarding the test methods for physical-chemical characterization of vitreous materials (as sealing SOFC component), ceramic materials (as electrodes and electrolyte components, including alternative materials used) and metallic materials (interconnect components) are subject of overview. It is established that electrical, mechanical, surface and interfacial phenomena, chemical durability and thermal corrosion behaviour are the key areas for standardization of the materials for SOFC components

  12. AKRO: Standard Prices

    National Oceanic and Atmospheric Administration, Department of Commerce — Standard prices are generated for cost recovery programs in the Individual Fishing Quota (IFQ) halibut and sablefish, BSAI Rationalized crab, and Central Gulf of...

  13. Crew Transportation Operations Standards

    Mango, Edward J.; Pearson, Don J. (Compiler)

    2013-01-01

    The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

  14. Nuclear radiation gauge standard

    Berry, R.L.

    1977-01-01

    A hydrophobic standard for calibrating nuclear radiation moisture gauges is described, comprising a body of superposed interleaved thin layers of a moderating material containing hydrogen in the molecular structure thereof and of a substantially non-moderating material

  15. Ozone Standard Reference Photometer

    Federal Laboratory Consortium — The Standard Reference Photometer (SRP) Program began in the early 1980s as collaboration between NIST and the U.S. Environmental Protection Agency (EPA) to design,...

  16. Beyond the standard model

    Pleitez, V.

    1994-01-01

    The search for physics laws beyond the standard model is discussed in a general way, and also some topics on supersymmetry theories. An approach is made on recent possibilities rise in the leptonic sector. Finally, models with SU(3) c X SU(2) L X U(1) Y symmetry are considered as alternatives for the extensions of the elementary particles standard model. 36 refs., 1 fig., 4 tabs

  17. Testing the standard model

    Gordon, H.; Marciano, W.; Williams, H.H.

    1982-01-01

    We summarize here the results of the standard model group which has studied the ways in which different facilities may be used to test in detail what we now call the standard model, that is SU/sub c/(3) x SU(2) x U(1). The topics considered are: W +- , Z 0 mass, width; sin 2 theta/sub W/ and neutral current couplings; W + W - , Wγ; Higgs; QCD; toponium and naked quarks; glueballs; mixing angles; and heavy ions

  18. The Gold Standard Programme

    Neumann, Tim; Rasmussen, Mette; Ghith, Nermin

    2013-01-01

    To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates.......To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates....

  19. Food Safety & Standards

    2005-01-01

    @@ An increasing number of people have realized that food safety is an important issue for public health. It not only concerns public health and safety, but also has direct influence on national economic progress and social development. The development and implementation of food safety standards play a vital role in protecting public health, as well as in standardizing and facilitating the sound development of food production and business.

  20. Islam, Standards, and Technoscience

    Fischer, Johan

    Halal (literally, "permissible" or "lawful") production, trade, and standards have become essential to state-regulated Islam and to companies in contemporary Malaysia and Singapore, giving these two countries a special position in the rapidly expanding global market for halal products......, this book provides an exploration of the role of halal production, trade, and standards. Fischer explains how the global markets for halal comprise divergent zones in which Islam, markets, regulatory institutions, and technoscience interact and diverge. Focusing on the "bigger institutional picture...

  1. Standard software for CAMAC

    Lenkszus, F.R.

    1978-01-01

    The NIM Committee (National Instrumentation Methods Committee) of the U.S. Department of Energy and the ESONE Committee of European Laboratories have jointly specified standard software for use with CAMAC. Three general approaches were followed: the definition of a language called IML for use in CAMAC systems, the definition of a standard set of subroutine calls, and real-time extensions to the BASIC language. This paper summarizes the results of these efforts. 1 table

  2. Standards update -- 1995

    Mason, J.D.

    1995-12-31

    What a year this has been! Not since 1986, when SGML was being finished, has there been so much activity in the SGML world. In ISO, there are new standards being completed and old ones (some of which are not really all that old) being revised. As you`ll be hearing, there is lots of SGML activity in the applications world--particularly on the Internet--and that`s causing other kinds of standards activity. WG8 divides its work into five ``Rapporteur Groups`` (or ``RGs``) for DSSSL, Font Description and Interchange, SGML, SPDL, and Hypermedia Languages. Since interest is in DSSSL, SGML, and Hypermedia Languages, the author only mentions that the other groups have been active, too. The Fronts group has been doing amendments to its standards, ISO/IEC 9541 and ISO/IEC 10036. The Fronts groups has been active in providing support for ISO/IEC 10646, the massive character coding standard that has drawn a lot of attention in the SGML world. The SPDL group has at long last finished its standard, the Standard Page Description Language (ISO/IEC 10180) and is about to publish it. More detailed discussions are given for activity in SGML, DSSSL, and Hypermedia Languages.

  3. ISO radiation sterilization standards

    Lambert, Byron J.; Hansen, Joyce M.

    1998-01-01

    This presentation provides an overview of the current status of the ISO radiation sterilization standards. The ISO standards are voluntary standards which detail both the validation and routine control of the sterilization process. ISO 11137 was approved in 1994 and published in 1995. When reviewing the standard you will note that less than 20% of the standard is devoted to requirements and the remainder is guidance on how to comply with the requirements. Future standards developments in radiation sterilization are being focused on providing additional guidance. The guidance that is currently provided in informative annexes of ISO 11137 includes: device/packaging materials, dose setting methods, and dosimeters and dose measurement, currently, there are four Technical Reports being developed to provide additional guidance: 1. AAMI Draft TIR, 'Radiation Sterilization Material Qualification' 2. ISO TR 13409-1996, 'Sterilization of health care products - Radiation sterilization - Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches' 3. ISO Draft TR, 'Sterilization of health care products - Radiation sterilization Selection of a sterilization dose for a single production batch' 4. ISO Draft TR, 'Sterilization of health care products - Radiation sterilization-Product Families, Plans for Sampling and Frequency of Dose Audits'

  4. Technical standards in nuclear area

    Grimberg, M.

    1978-01-01

    The technical standardization in nuclear area is discussed. Also, the competence of CNEN in standardization pursuit is analysed. Moreover, the process of working up of technical standards is explained; in addition, some kinds of technical standards are discussed. (author) [pt

  5. DOE technical standards list. Department of Energy standards index

    NONE

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  6. DOE technical standards list: Department of Energy standards index

    NONE

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  7. GISB: Efficiency through standardization

    White, B.

    1995-01-01

    For those who participated in the numerous day-long development sessions held in the dim, stale basement auditorium of the Department of Energy, the ida that the Gas Industry standards Board (GISB) would be producing standards anytime soon seemed a distant dream. However, the hazy vision of just over a year ago has now become a reality. As summer turns to fall and young gas schedulers throughout this country dream of the gridiron, GISB will have already issued a model electronic-trading partner agreement and 12 standards for capacity-release transactions, as well as three standards for nomination-related transactions. Under the steady hand of Executive directors Rae McQuade and a board of director that looks like a Who's Who of the gas industry, GISB has developed into a organization that will directly influence how gas is purchased, transported, and accounted and paid for in the 21st century. The paper describes the background of the organization, standards that have been released, and issues still to be addressed

  8. Sports eyewear protective standards.

    Dain, Stephen J

    2016-01-01

    Eye injuries sustained during sport comprise up to 20 per cent of all injuries to the eye serious enough for medical attention to be sought. The prevalence of eye injuries in sport is not easily assessed due to lack of authoritative participation rates, so most studies report total numbers in a time period. The evidence on the proportion of all ocular injuries that are from sport is reviewed. The relative frequencies in different sports are compared in a qualitative manner and the sports with greater numbers of ocular injuries are detailed. In common with occupational injuries to the eye, most sports eye injuries are considered preventable. The hierarchy of action for occupational risk is detailed and adapted to use in a sports scenario. All the available international, regional and national standards on sports eye protection are detailed and their provisions compared. The major function of the standards is to provide adequate protection against the hazard of the sport concerned. These are detailed and compared as a function of energy transfer. Eye protection must not introduce additional or secondary hazards (for instance, fracturing into sharp fragments on impact) and not introduce features that would deter the wearing of eye protection (for instance, restricting field of view to impede playing the sport). The provisions of the standards intended to limit secondary hazards are detailed and compared. The need for future work in standards writing and the activities of the International Standardization Organization in sports eye protection are detailed. © 2016 Optometry Australia.

  9. IAEA Safety Standards

    2016-09-01

    The IAEA Safety Standards Series comprises publications of a regulatory nature covering nuclear safety, radiation protection, radioactive waste management, the transport of radioactive material, the safety of nuclear fuel cycle facilities and management systems. These publications are issued under the terms of Article III of the IAEA’s Statute, which authorizes the IAEA to establish “standards of safety for protection of health and minimization of danger to life and property”. Safety standards are categorized into: • Safety Fundamentals, stating the basic objective, concepts and principles of safety; • Safety Requirements, establishing the requirements that must be fulfilled to ensure safety; and • Safety Guides, recommending measures for complying with these requirements for safety. For numbering purposes, the IAEA Safety Standards Series is subdivided into General Safety Requirements and General Safety Guides (GSR and GSG), which are applicable to all types of facilities and activities, and Specific Safety Requirements and Specific Safety Guides (SSR and SSG), which are for application in particular thematic areas. This booklet lists all current IAEA Safety Standards, including those forthcoming

  10. Code, standard and specifications

    Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

    2008-01-01

    Radiography also same as the other technique, it need standard. This standard was used widely and method of used it also regular. With that, radiography testing only practical based on regulations as mentioned and documented. These regulation or guideline documented in code, standard and specifications. In Malaysia, level one and basic radiographer can do radiography work based on instruction give by level two or three radiographer. This instruction was produced based on guideline that mention in document. Level two must follow the specifications mentioned in standard when write the instruction. From this scenario, it makes clearly that this radiography work is a type of work that everything must follow the rule. For the code, the radiography follow the code of American Society for Mechanical Engineer (ASME) and the only code that have in Malaysia for this time is rule that published by Atomic Energy Licensing Board (AELB) known as Practical code for radiation Protection in Industrial radiography. With the existence of this code, all the radiography must follow the rule or standard regulated automatically.

  11. Standardization of depression measurement

    Wahl, Inka; Löwe, Bernd; Bjørner, Jakob

    2014-01-01

    OBJECTIVES: To provide a standardized metric for the assessment of depression severity to enable comparability among results of established depression measures. STUDY DESIGN AND SETTING: A common metric for 11 depression questionnaires was developed applying item response theory (IRT) methods. Data...... of 33,844 adults were used for secondary analysis including routine assessments of 23,817 in- and outpatients with mental and/or medical conditions (46% with depressive disorders) and a general population sample of 10,027 randomly selected participants from three representative German household surveys....... RESULTS: A standardized metric for depression severity was defined by 143 items, and scores were normed to a general population mean of 50 (standard deviation = 10) for easy interpretability. It covers the entire range of depression severity assessed by established instruments. The metric allows...

  12. Standards and quality

    El-Tawil, Anwar

    2015-01-01

    The book brings together a number of subjects of prime importance for any practicing engineer and, students of engineering. The book explains the concepts and functions of voluntary standards, mandatory technical regulations, conformity assessment (testing and measurement of products), certification, quality and quality management systems as well as other management systems such as environmental, social responsibility and food safety management systems.The book also gives a comprehensive description of the role of metrology systems that underpin conformity assessment. A description is given of typical national systems of standards, quality and metrology and how they relate directly or through regional structures to international systems. The book also covers the relation between standards and trade and explains the context and stipulations of the Technical Barriers to Trade Agreement of the World Trade Organization (WTO).

  13. Operator licensing examiner standards

    1983-10-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes. As appropriate, these standards will be revised periodically to accommodate comments and reflect new information or experience

  14. Beyond the standard model

    Altarelli, G.

    1987-01-01

    The standard model of particle interactions is a complete and relatively simple theoretical framework which describes all the observed fundamental forces. It consists of quantum chromodynamics (QCD) and of the electro-weak theory of Glashow, Salam and Weinberg. The former is the theory of colored quarks and gluons, which underlies the observed phenomena of strong interactions, the latter leads to a unified description of electromagnetism and of weak interactions. The inclusion of the classical Einstein theory of gravity completes the set of established basic knowledge. The standard model is in agreement with essentially all of the experimental information which is very rich by now. The recent discovery of the charged and neutral intermediate vector bosons of weak interactions at the expected masses has closed a really important chapter of particle physics. Never before the prediction of new particles was so neat and quantitatively precise. Yet the experimental proof of the standard model is not completed. For example, the hints of experimental evidence for the top quark at a mass ∼ 40 GeV have not yet been firmly established. The Higgs sector of the theory has not been tested at all. Beyond the realm of pure QED, even remaining within the electro-weak sector, the level of quantitative precision in testing the standard model does not exceed 5% or so. Furthermore, the standard model does not look as the ultimate theory. To a closer inspection a large class of fundamental questions emerges and one finds that a host of crucial problems are left open by the standard model

  15. Conference: STANDARD MODEL @ LHC

    2012-01-01

    HCØ institute Universitetsparken 5 DK-2100 Copenhagen Ø Denmark Room: Auditorium 2 STANDARD MODEL @ LHC Niels Bohr International Academy and Discovery Center 10-13 April 2012 This four day meeting will bring together both experimental and theoretical aspects of Standard Model phenomenology at the LHC. The very latest results from the LHC experiments will be under discussion. Topics covered will be split into the following categories:     * QCD (Hard,Soft & PDFs)     * Vector Boson production     * Higgs searches     * Top Quark Physics     * Flavour physics

  16. The Standard Model

    Burgess, Cliff; Moore, Guy

    2012-04-01

    List of illustrations; List of tables; Preface; Acknowledgments; Part I. Theoretical Framework: 1. Field theory review; 2. The standard model: general features; 3. Cross sections and lifetimes; Part II. Applications: Leptons: 4. Elementary boson decays; 5. Leptonic weak interactions: decays; 6. Leptonic weak interactions: collisions; 7. Effective Lagrangians; Part III. Applications: Hadrons: 8. Hadrons and QCD; 9. Hadronic interactions; Part IV. Beyond the Standard Model: 10. Neutrino masses; 11. Open questions, proposed solutions; Appendix A. Experimental values for the parameters; Appendix B. Symmetries and group theory review; Appendix C. Lorentz group and the Dirac algebra; Appendix D. ξ-gauge Feynman rules; Appendix E. Metric convention conversion table; Select bibliography; Index.

  17. Operator licensing examiner standards

    1987-05-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes

  18. Green industrial policy. Perspectives of economic and political scienc; Oekologische Industriepolitik. Wirtschafts- und politikwissenschaftliche Perspektiven

    Jacob, Klaus [Freie Univ. Berlin (Germany)

    2009-01-15

    The necessity and possibilities of, limits to and the specific instruments employed for green industrial policy are a topic of both scientific and political debate. Economists and politicians can draw on rich resources in dealing with these issues. The contributions contained in this volume are the outcome of a workshop held by the German Federal Environment Agency and the Federal Environment Ministry on the topic of ''Green industrial policy'' on 18 April 2008 in Berlin. Economists and politicians were invited to participate in an expert dialog to locate the topic of green industrial policy within the larger discourses of political economics, deliberate on theoretical motives and practical limits to the concept from an economic viewpoint and discuss possible instruments and fields of action. The workshop focussed on questions relating to the necessity of green industrial policy, the framing of political programmes and the implementation of adopted goals into specific measures.

  19. Green knowledge management to support environmental sustainability; Green knowledge management zur Unterstuetzung oekologischer Nachhaltigkeit

    Dornhoefer, Mareike-Jessica

    2017-01-24

    Sustainability, environmental management and green initiatives are topics which gradually developed into trends since the late 1980s, not only in research institutions, but also in public and private organizations. While the usage of energy and other resources are increasing, these organizations search for new possibilities to reduce the economic, ecologic and social burdens and consequences of office and production environments for employees and nature. While certified environmental management systems were established already in the 1990s, green approaches and technologies are only about 10 years old and steadily developing. Decisions about a fitting strategy and the support of suitable measures inside an organization always require knowledge provided for the decision makers. Furthermore it is of importance to record the environmental consequences of the operational business and to not only record data and information, but to create a context and deduce the knowledge for future activities. Based on this situation, the work addresses the main research question of how �classical'' knowledge management might be further developed or transformed into Green Knowledge Management and how it addresses the goals of sustainability, especially ecological sustainability, environmental management and green approaches alike? The definition of Green Knowledge Management consists of five factors, which are discussed systematically, explored conceptually and documented with the help of practical examples. Different knowledge management models and their respective building blocks are analyzed to deduce how knowledge processes might interact with environmental ones as well as green aspects. Also different types of knowledge management systems are analysed for their application possibilities. A planning and decision making tool in form of a three dimensional cube, the ''Green Knowledge Management Cube'' is introduced on a conceptual level and documented with the help of exemplary implementations. An additional aspect for the development of Green Knowledge Management bases on the intensive analysis of environmental information systems and the possibilities for extending these systems to environmental knowledge systems. The work presents a model of an environmental knowledge system called UmweltWiS. The logic of the system applies semantic technologies to provide a flexible and extensible structure to integrate public linked open data sources with an environmental background. The UmweltWiS concept is designed to be applicable in different application scenarios, in public and private context. This is documented with the help of three use case scenarios of forestry, material science and modern industry 4.0 production environments. At the end of the work it is discussed how Green Knowledge Management may address the recycling and reduction of knowledge to provide possibilities for reusability. The reduction of knowledge supports the prevention of redundant knowledge fragmentation or the usage of outdated knowledge.

  20. Ecological reconstruction of older buildings. Munich, Pariser Str. 10. Oekologische Sanierung. Beispiel: Muenchen, Pariser Str. 10

    Gonzalo, R.

    1990-04-01

    In response to an initiative of the Ernst Friedrich Schumacher Gesellschaft fuer politische Oekologie e.V., the Muenchener Gesellschaft fuer Stadterneuerung GmbH (MGS) carried out a model project for an ecological reconstruction of an older building. Apart from the energy conservation effect, practical experience was to be gained on the ecological and energy efficient application of different measures. The project is to serve as a model for future sanitation projects. (orig./KW).

  1. All around ecological. Administrative building of the district office Goeppingen; Rundum oekologisch. Verwaltungsgebaeude des Landratsamts Goeppingen

    Anon.

    2011-07-15

    This district office in Goeppingen (Federal Republic of Germany) just had ten months in order to build a completely new administrative building. For the employees of the district's waste company, a house was needed with a gross floor area of 2,020 m{sup 2}. Despite the tight time frame, one correlated to an environmentally friendly and energy-saving concept: The building should consume energy as little as possible in future. The new building was constructed extremely rapidly and is now regarded as a flagship project: it is heated using a geothermal heat pump and seven geothermal probes. A sophisticated system provides for storage and recycling of excess energy.

  2. Ecologically sustainable coating technology. BehrOxal process; Oekologisch nachhaltige Beschichtungstechnologie. BehrOxal-Verfahren

    Anon.

    2007-10-15

    Since 1st July, 2007, any more hexavalent chromium (chromium(VI)) has to be used in vehicles. Two years ago, Behr GmbH and Co. KG (Stuttgart, Federal Republic of Germany) developed a new procedure in order to coat evaporators in air conditioners perfectly chrome-free. Since one year, the coating process is used serially. The resonance of the customers is positively throughout - so the manufacturer.

  3. Aquatic ecotoxicology: properties of compounds and ecological risk; Aquatische Oekotoxikologie: Stoffeigenschaften und oekologisches Risiko

    Klein, W. [Fraunhofer-Institut fuer Umweltchemie und Oekotoxikologie, Schmallenberg (Germany)

    1999-07-01

    In spite of considerable advances in research ecotoxicology and ecotoxicology for testing purposes, fundamental problems exist owing to the immense range of concepts, prerequisites and goals. Alleged weaknesses of ecotoxicology in terms of knowledge acquisition so far have had their cause not only in its pragmatic empirism but also in inadequate methodics and, especially, inconsistent or diversified target orientation. The methodics currently available provide tools permitting to a very large extent to fulfill requirements with the necessary precision and acuity. But practical execution has to heed the magnitude of effort that society is prepared to make for the benefit of the environment. Here, setting the appropriate priorities is the second major challenge to the objectivity of experts, following the assessment of risk versus benefit. (orig.) [German] Trotz erheblicher Fortschritte in der wissenschaftlichen und Pruefoekotoxikologie bestehen aufgrund der Vielfalt der Konzeptionen, Anforderungen und Zielvorgaben grundsaetzliche Probleme. Bisherige behauptete Schwaechen der Oekotoxikologie im Hinblick auf Erkenntnisfortschritt sind nicht nur durch pragmatische Empirie begruendet, sondern auch in ungenuegender Methodik und insbesondere inkonsistenter bzw. vielfaeltiger Zielorientierung. Mit der derzeit verfuegbaren Methodik koennen Anforderungen mit der jeweils notwendigen Praezision und Aussageschaerfe weitestgehend bearbeitet werden. Die praktische Bearbeitung hat sich jedoch danach zu richten, welchen Aufwand die Gesellschaft bereit ist fuer die Gesundheit der Umwelt zu tragen, wobei die richtige Prioritaetensetzung nach den Kriterien Risiko-Nutzen-Aufwand die wohl groesste Herausforderung an Expertenobjektivitaet darstellt. (orig.)

  4. Climate change and ecological restructuring of industrial society; Klimawandel und oekologischer Umbau der Industriegesellschaft

    NONE

    2011-07-01

    Within the European Conference at 22nd/23rd September, 2010 at the Thuringian state chancellery Erfurt (Federal Republic of Germany) the following lectures were held: (1) The climatic change and the global development (Dirk Messner); (2) Reconstruction of the industrial society: How can Vorarlberg achieve the aim of the EU up to 2020 (Bertram Schedler); (3) The part of renewable energy sources in Germany: Establishment of an infrastructure with low CO{sub 2} emissions in the energy supply and facility management (Ursula Heinen); (4) Securing the energy supply under the aegis of the shortages of petroleum, natural gas and coal: The role of renewable energy resources and solar energy in the solar state of Thuringia (Matthias Machnig); (5) ''Desert Energy'' for Europe: From the vision to reality (Thorsten Marquardt); (6) Solar primary industry under the Bitterfelder Bogen from the view of the modern ''solar site with future'' (Hilmar Tiefel); (7) CO{sub 2} reduction, energy efficiency and renewable energies: European research politics for a better energy supply (Reinhard Wecker); (8) Panel discussion on the improvement of the efficiency / price reduction and compensation for electricity fed into the grid: How do owners of companies and buildings motivate to more commitment for solar energy? (Harry Lehmann, Ami Elazari, Dieter D. Genske).

  5. Low Impact Development Standards

    Loftin, Samuel R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-02

    The goal of the LID Standards is to provide guidance on the planning, design, construction and maintenance of green infrastructure (GI) features at Los Alamos National Laboratory. The success of LID at LANL is dependent on maintaining a consistent approach to achieve effective application, operation, and maintenance of these storm water control features.

  6. Standards and producers' liability

    Kretschmer, F.

    1979-01-01

    The author discusses the liability of producers and the diligence required, which has to come up to technical standards and the latest state of technology. The consequences of this requirement with regard to claims for damages are outlined and proposals for reforms are pointed out. (HSCH) [de

  7. GASB Achieves Standardization, Recognition.

    Bissell, George E.

    1986-01-01

    In 1984 the Governmental Accounting Standards Board, created to solidify accounting principles for government entities, enumerated Generally Accepted Accounting Principles endorsed by the American Institute of Certified Public Accountants and the National Council on Governmental Accounting. These principles have recently been approved for school…

  8. Standard hakkab tootma Mercedesele

    2005-01-01

    AS Standard sõlmis ühe maailma suurema autotootjaga DaimlerChrysler AG koostöölepingu, mille kohaselt hakkab ettevõte tootma ning müüma kontori- ja teenindussaalide mööblit kontserni kuuluva Mercedes-Benzi Euroopa diileritele

  9. Elevating standards, improving safety.

    Clarke, Richard

    2014-08-01

    In our latest 'technical guidance' article, Richard Clarke, sales and marketing director at one of the UK's leading lift and escalator specialists, Schindler, examines some of the key issues surrounding the specification, maintenance, and operation of lifts in hospitals to help ensure the highest standards of safety and reliability.

  10. International Financial Reporting Standards

    Pontoppidan, Caroline Aggestam

    2011-01-01

    The advance of International Financial Reporting Standards (IFRS) across the globe has accelerated over the last few years. This is placing increasing demands on educators to respond to these changes by an increased focus on IFRS in the curricula of accounting students. This paper reviews a range...

  11. Standard Model festival

    Anon.

    1987-10-15

    The 'Standard Model' of modern particle physics, with the quantum chromodynamics (QCD) theory of inter-quark forces superimposed on the unified electroweak picture, is still unchallenged, but it is not the end of physics. This was the message at the big International Symposium on Lepton and Photon Interactions at High Energies, held in Hamburg from 27-31 July.

  12. Beyond the standard model

    Cuypers, F.

    1997-05-01

    These lecture notes are intended as a pedagogical introduction to several popular extensions of the standard model of strong and electroweak interactions. The topics include the Higgs sector, the left-right symmetric model, grand unification and supersymmetry. Phenomenological consequences and search procedures are emphasized. (author) figs., tabs., 18 refs

  13. Standardized terminology in electronic

    Pallas, R.

    1985-01-01

    The correct definitions of the most usual terms on standardization and homologation are given. Then the factors concerning the safety of electrical equipments are reviewed, as they are considered in most of the present legislations. Last, the state of homologations in Spain and Europe is included. (author)

  14. Standard Model festival

    Anon.

    1987-01-01

    The 'Standard Model' of modern particle physics, with the quantum chromodynamics (QCD) theory of inter-quark forces superimposed on the unified electroweak picture, is still unchallenged, but it is not the end of physics. This was the message at the big International Symposium on Lepton and Photon Interactions at High Energies, held in Hamburg from 27-31 July

  15. Beyond the Standard Model

    CERN. Geneva

    2005-01-01

    The necessity for new physics beyond the Standard Model will be motivated. Theoretical problems will be exposed and possible solutions will be described. The goal is to present the exciting new physics ideas that will be tested in the near future. Supersymmetry, grand unification, extra dimensions and string theory will be presented.

  16. Standardization of Sign Languages

    Adam, Robert

    2015-01-01

    Over the years attempts have been made to standardize sign languages. This form of language planning has been tackled by a variety of agents, most notably teachers of Deaf students, social workers, government agencies, and occasionally groups of Deaf people themselves. Their efforts have most often involved the development of sign language books…

  17. Mixed RIA standard

    Talan, P.; Mucha, J.; Krizan, J.

    1986-01-01

    For the radioimmunoassay of digoxin, 3,5,3'-triiodothyronine, 17β-estradiol, progesterone, testosterone and α 1 -fetoprotein a mixed standard was prepared of these substances in a gamma globulin solution at a concentration of 0.8 to 1.4 wt.% in an aqueous buffer at pH within the range of 6 - 9. The standard contains digoxin at a concentration of 10 -4 to 10 nmol/l, 17β-estradiol at 10 -4 to 2 nmol/l, progesteron at 10 -4 to 100 nmol/l, testosterone at 1o -4 to 21 nmol/l, and α 1 -fetoprotein at 10 -4 to 10 nmol/l with at least two of these substances having concentrations higher than 10 -3 nmol/l. Examples are given of the preparation of the mixed standard with different concentrations of the components. The use of the standard has the following advantages: it is labor saving, reduces the risk of failure in the manufacture of RIA kits, eliminates mistakes in the selection of kits for the determination of different substances and allows a more economical use of material. (E.S.)

  18. Nationwide Standards Eyed Anew

    Olson, Lynn

    2005-01-01

    With the federal No Child Left Behind Act underscoring the wide variation in what states demand of their students, people on both sides of the political aisle are again making the case for national standards, curricula, and tests. It wasn't so long ago--during the Clinton and George H.W. Bush administrations--that similar proposals went down in…

  19. DOE standard: Radiological control

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  20. Hg(+) Frequency Standards

    Prestage, John D.; Tjoelker, Robert L.; Maleki, Lute

    2000-01-01

    In this paper we review the development of Hg(+) microwave frequency standards for use in high reliability and continuous operation applications. In recent work we have demonstrated short-term frequency stability of 3 x 10(exp -14)/nu(sub tau) when a cryogenic oscillator of stability 2-3 x 10(exp 15) was used a the local oscillator. The trapped ion frequency standard employs a Hg-202 discharge lamp to optically pump the trapped Hg(+)-199 clock ions and a helium buffer gas to cool the ions to near room temperature. We describe a small Hg(+) ion trap based frequency standard with an extended linear ion trap (LITE) architecture which separates the optical state selection region from the clock resonance region. This separation allows the use of novel trap configurations in the resonance region since no optical pumping is carried out there. A method for measuring the size of an ion cloud inside a linear trap with a 12-rod trap is currently being investigated. At approx. 10(exp -12), the 2nd order Doppler shift for trapped mercury ion frequency standards is one of the largest frequency offsets and its measurement to the 1% level would represent an advance in insuring the very long-term stability of these standards to the 10(exp -14) or better level. Finally, we describe atomic clock comparison experiments that can probe for a time variation of the fine structure constant, alpha = e(exp 2)/2(pi)hc, at the level of 10(exp -20)/year as predicted in some Grand Unified String Theories.

  1. DOE standard: Radiological control

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ''Occupational Radiation Protection''. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835

  2. Seminar on standards, standardization, quality control and interlaboratory test programmes

    de Bievre, P. [Central Bureau for Nuclear Measurements, Geel (Belgium)

    1978-12-15

    The author gives a resume on the proper use of standards and standardization of measurement procedures. Results of measurements obtained on the same instrument and on the same series of standards of different isotopic compositions are displayed.

  3. Department of Energy Standards Index

    NONE

    1995-08-01

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  4. DOE technical standards list: Department of Energy standards index

    NONE

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  5. Standarder for god undervisning

    Dolin, Jens; Christiansen, Frederik V; Troelsen, Rie

    foretages på baggrund af forskningsresultater, og ansattes engagement i undervisning vil ofte være på bekostning af forskningsindsatsen – og dermed på bekostning af vedkommendes akademiske karriere. Dette roundtable vil diskutere hvorvidt indførelsen af standarder for god undervisning kan være en del af en...... indsats, som både kan øge kvaliteten i de videregående uddannelser og øge undervisningens status. En sådan standard kan formuleres på mange måder, som har indflydelse på såvel anvendelighed som på selve forståelsen af hvad god undervisning er. Den udviklede model kan opfattes som et dialogredskab...

  6. Beyond the Standard Model

    Peskin, M.E.

    1997-05-01

    These lectures constitute a short course in ''Beyond the Standard Model'' for students of experimental particle physics. The author discusses the general ideas which guide the construction of models of physics beyond the Standard model. The central principle, the one which most directly motivates the search for new physics, is the search for the mechanism of the spontaneous symmetry breaking observed in the theory of weak interactions. To illustrate models of weak-interaction symmetry breaking, the author gives a detailed discussion of the idea of supersymmetry and that of new strong interactions at the TeV energy scale. He discusses experiments that will probe the details of these models at future pp and e + e - colliders

  7. Beyond the Standard Model

    Peskin, M.E.

    1997-05-01

    These lectures constitute a short course in ``Beyond the Standard Model`` for students of experimental particle physics. The author discusses the general ideas which guide the construction of models of physics beyond the Standard model. The central principle, the one which most directly motivates the search for new physics, is the search for the mechanism of the spontaneous symmetry breaking observed in the theory of weak interactions. To illustrate models of weak-interaction symmetry breaking, the author gives a detailed discussion of the idea of supersymmetry and that of new strong interactions at the TeV energy scale. He discusses experiments that will probe the details of these models at future pp and e{sup +}e{sup {minus}} colliders.

  8. Beyond standard quantum chromodynamics

    Brodsky, S.J.

    1995-09-01

    Despite the many empirical successes of QCD, there are a number of intriguing experimental anomalies that have been observed in heavy flavor hadroproduction, in measurements of azimuthal correlations in deep inelastic processes, and in measurements of spin correlations in hadronic reactions. Such phenomena point to color coherence and multiparton correlations in the hadron wavefunctions and physics beyond standard leading twist factorization. Two new high precision tests of QCD and the Standard Model are discussed: classical polarized photoabsorption sum rules, which are sensitive to anomalous couplings and composite structure, and commensurate scale relations, which relate physical observables to each other without scale or scheme ambiguity. The relationship of anomalous couplings to composite structure is also discussed

  9. Testing the Standard Model

    Riles, K

    1998-01-01

    The Large Electron Project (LEP) accelerator near Geneva, more than any other instrument, has rigorously tested the predictions of the Standard Model of elementary particles. LEP measurements have probed the theory from many different directions and, so far, the Standard Model has prevailed. The rigour of these tests has allowed LEP physicists to determine unequivocally the number of fundamental 'generations' of elementary particles. These tests also allowed physicists to ascertain the mass of the top quark in advance of its discovery. Recent increases in the accelerator's energy allow new measurements to be undertaken, measurements that may uncover directly or indirectly the long-sought Higgs particle, believed to impart mass to all other particles.

  10. Frequency Standards and Metrology

    Maleki, Lute

    2009-04-01

    Preface / Lute Maleki -- Symposium history / Jacques Vanier -- Symposium photos -- pt. I. Fundamental physics. Variation of fundamental constants from the big bang to atomic clocks: theory and observations (Invited) / V. V. Flambaum and J. C. Berengut. Alpha-dot or not: comparison of two single atom optical clocks (Invited) / T. Rosenband ... [et al.]. Variation of the fine-structure constant and laser cooling of atomic dysprosium (Invited) / N. A. Leefer ... [et al.]. Measurement of short range forces using cold atoms (Invited) / F. Pereira Dos Santos ... [et al.]. Atom interferometry experiments in fundamental physics (Invited) / S. W. Chiow ... [et al.]. Space science applications of frequency standards and metrology (Invited) / M. Tinto -- pt. II. Frequency & metrology. Quantum metrology with lattice-confined ultracold Sr atoms (Invited) / A. D. Ludlow ... [et al.]. LNE-SYRTE clock ensemble: new [symbol]Rb hyperfine frequency measurement - spectroscopy of [symbol]Hg optical clock transition (Invited) / M. Petersen ... [et al.]. Precise measurements of S-wave scattering phase shifts with a juggling atomic clock (Invited) / S. Gensemer ... [et al.]. Absolute frequency measurement of the [symbol] clock transition (Invited) / M. Chwalla ... [et al.]. The semiclassical stochastic-field/atom interaction problem (Invited) / J. Camparo. Phase and frequency noise metrology (Invited) / E. Rubiola ... [et al.]. Optical spectroscopy of atomic hydrogen for an improved determination of the Rydberg constant / J. L. Flowers ... [et al.] -- pt. III. Clock applications in space. Recent progress on the ACES mission (Invited) / L. Cacciapuoti and C. Salomon. The SAGAS mission (Invited) / P. Wolf. Small mercury microwave ion clock for navigation and radioScience (Invited) / J. D. Prestage ... [et al.]. Astro-comb: revolutionizing precision spectroscopy in astrophysics (Invited) / C. E. Kramer ... [et al.]. High frequency very long baseline interferometry: frequency standards and

  11. DOE standard: Firearms safety

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements

  12. Beyond the Standard Model

    Ross, G.G.

    1995-01-01

    The attempts to develop models beyond the Standard Model are briefly reviewed paying particular regard to the mechanisms responsible for symmetry breaking and mass generation. A comparison is made of the theoretical expectations with recent precision measurements for theories with composite Higgs and for supersymmetric theories with elementary Higgs boson(s). The implications of a heavy top quark and the origin of the light quark and lepton masses and mixing angles are considered within these frameworks. ((orig.))

  13. New standard environmental management

    Andriola, Luca; Luciani, Roberto

    2006-01-01

    The ISO 14001:2004 standard, like ISO 9001:2000 on quality management, transcends the preventive approach (based on a rigid and more or less adequate process-management model still mainly inspired by traditional production methods) and introduces in its stead a highly flexible approach applicable to any socio-economic activity. It is structured by processes rather than system elements, and is based on the quest for efficacy and ongoing improvement [it

  14. Standard Model physics

    Altarelli, Guido

    1999-01-01

    Introduction structure of gauge theories. The QEDand QCD examples. Chiral theories. The electroweak theory. Spontaneous symmetry breaking. The Higgs mechanism Gauge boson and fermion masses. Yukawa coupling. Charges current couplings. The Cabibo-Kobayashi-Maskawa matrix and CP violation. Neutral current couplings. The Glasow-Iliopoulos-Maiani mechanism. Gauge boson and Higgs coupling. Radiative corrections and loops. Cancellation of the chiral anomaly. Limits on the Higgs comparaison. Problems of the Standard Model. Outlook.

  15. Standard model and beyond

    Quigg, C.

    1984-09-01

    The SU(3)/sub c/ circle crossSU(2)/sub L/circle crossU(1)/sub Y/ gauge theory of ineractions among quarks and leptons is briefly described, and some recent notable successes of the theory are mentioned. Some shortcomings in our ability to apply the theory are noted, and the incompleteness of the standard model is exhibited. Experimental hints that Nature may be richer in structure than the minimal theory are discussed. 23 references

  16. DOE standard: Firearms safety

    NONE

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements.

  17. Natural matrix standards

    Bowen, V.T.

    1976-01-01

    Environmental radiochemistry needs, for use in analytical intercomparision and as standard reference materials, very large homogeneous samples of a variety of matrices, each naturally contaminated by a variety of longer-lived radionuclides, at several different ranges of concentrations. The reasons for this need are discussed, and the minimum assortment of matrices of radionuclides, and of concentrations is established. Sources of suitable materials are suggested, and the international approach to meeting this need is emphasized

  18. Non_standard Wood

    Tamke, Martin

    . Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

  19. Natural matrix standards

    Bowen, V.T.

    1978-01-01

    Environmental radiochemistry needs, for use in analytical inter-comparison and as standard reference materials, very large homogeneous samples of a variety of longer-lived radionuclides, at several different ranges of concentrations. The reasons for this need are discussed, and the minimum assortment of matrices, of radionuclides, and of concentrations is established. Sources of suitable materials are suggested, and the international approach to meeting this need is emphasized. (author)

  20. Operator licensing examiner standards

    1994-06-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes. Revision 7 was published in January 1993 and became effective in August 1993. Supplement 1 is being issued primarily to implement administrative changes to the requalification examination program resulting from the amendment to 10 CFR 55 that eliminated the requirement for every licensed operator to pass an NRC-conducted requalification examination as a condition for license renewal. The supplement does not substantially alter either the initial or requalification examination processes and will become effective 30 days after its publication is noticed in the Federal Register. The corporate notification letters issued after the effective date will provide facility licensees with at least 90 days notice that the examinations will be administered in accordance with the revised procedures

  1. Standard biological parts knowledgebase.

    Michal Galdzicki

    2011-02-01

    Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  2. Standard Biological Parts Knowledgebase

    Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M.; Gennari, John H.

    2011-01-01

    We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate “promoter” parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible. PMID:21390321

  3. Standard biological parts knowledgebase.

    Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

    2011-02-24

    We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

  4. Emission- and product standards

    Jong, P. de

    1988-01-01

    This report makes part of a series of eight reports which have been drawn up in behalf of the dutch Policy Notition Radiation Standards (BNS). In this report the results are presented of an inventarization of the use of radioactive materials and ionizing-radiation emitting apparates in the Netherlands. Ch. 2 deals with the varous applications of radioactive materials in the Netherlands. Herein also the numbers and the various locations by application, and the amounts and character of the radioactive materials used, come under discussion. Besides, the various waste currents are considered separately. The use of ionizing-radiation emitting apparates is treated in ch. 3. In ch. 4 the differences and agreements of the various applications, concentrating on the emission and product standards to be drawn up, are entered further. Also on the base of these considerations, a number of starting points are formulated with regard to the way in which emission and product standards may be drawn up. Ch. 7 deals with the conclusions and indicates the most important hiates. (H.W.). 25 refs.; 5 figs.; 25 tabs

  5. US Topo Product Standard

    Cooley, Michael J.; Davis, Larry R.; Fishburn, Kristin A.; Lestinsky, Helmut; Moore, Laurence R.

    2011-01-01

    This document defines a U.S. Geological Survey (USGS) digital topographic map. This map series, named “US Topo,” is modeled on what is referred to as the standard USGS 7.5-minute (1:24,000-scale) topographic map series that was created during the period from 1947 to approximately 1992. The US Topo map product has the same extent, scale, and general layout as the older standard topographic maps. However, unlike the previous maps, US Topo maps are published using Adobe Systems Inc. Portable Document Format (PDF) with a geospatial extension that is called Georeferenced PDF (GeoPDF), patented by TerraGo Technologies. In addition, the US Topo map products incorporate an orthorectified image along with data that was included in the standard 7.5-minute topographic maps. US Topo maps are intended to serve conventional map users by providing Geographic Information System (GIS) information in symbolized form in the customary topographic map layout. The maps are not intended for GIS analysis applications.

  6. The IAEA safety standards

    Karbassioun, Ahmad

    1995-01-01

    During the development of the NUSS standards, wide consultation was carried out with all the Member States to obtain a consensus and the programme was supervised by a Senior Advisory Group consisting of senior safety experts from 13 countries. This group of senior regulators later became what is now known as the Nuclear Safety Standards Advisory Group (NUSSAG) and comprises of senior regulatory experts from 16 countries. The standards that were developed comprise of four types of documents: safety fundamentals; codes of practice; safety guides; and safety practices. The safety fundamentals set out the basic objectives, concepts and principles for nuclear safety in nuclear power plants. The codes of practice, are of a legislative nature, and establish the general objectives that must be fulfilled to ensure adequate nuclear power plant safety. They cover five areas: governmental organization; siting, design, operation and quality assurance. The safety guides, administrative in character, recommend procedures and acceptable technical solutions to implement the codes and guides by presenting further details gained from Member States, on the application and interpretation of individual concepts in the NUSS codes and guides. In total in the NUSS series there is currently one Fundamentals document, five Codes of Practice and fifty-six Safety Guides

  7. Implementing PAT with Standards

    Chandramohan, Laakshmana Sabari; Doolla, Suryanarayana; Khaparde, S. A.

    2016-02-01

    Perform Achieve Trade (PAT) is a market-based incentive mechanism to promote energy efficiency. The purpose of this work is to address the challenges inherent to inconsistent representation of business processes, and interoperability issues in PAT like cap-and-trade mechanisms especially when scaled. Studies by various agencies have highlighted that as the mechanism evolves including more industrial sectors and industries in its ambit, implementation will become more challenging. This paper analyses the major needs of PAT (namely tracking, monitoring, auditing & verifying energy-saving reports, and providing technical support & guidance to stakeholders); and how the aforesaid reasons affect them. Though current technologies can handle these challenges to an extent, standardization activities for implementation have been scanty for PAT and this work attempts to evolve them. The inconsistent modification of business processes, rules, and procedures across stakeholders, and interoperability among heterogeneous systems are addressed. This paper proposes the adoption of specifically two standards into PAT, namely Business Process Model and Notation for maintaining consistency in business process modelling, and Common Information Model (IEC 61970, 61968, 62325 combined) for information exchange. Detailed architecture and organization of these adoptions are reported. The work can be used by PAT implementing agencies, stakeholders, and standardization bodies.

  8. ISO radiation protection standards

    Becker, K.; West, N.

    1981-01-01

    After a brief description of the International Organization for Standardization (ISO) and its Technical Committee (TC) 85 ''Nuclear Energy'', the work of its Sub-Committee (SC) 2 ''Radiation Protection'' is described in some detail. Several international standards on subjects closely related to radiation protection have already been published, for example ISO-361 (Basic radiation protection symbol), ISO-1757 (Photographic dosimeters), ISO-1758 and 1759 (Direct and indirect-reading pocket exposure meters), ISO-2889 (Sampling of airborne radioactive materials), ISO-4037 (X and gamma reference radiations for calibration) and ISO-4071 (Testing of exposure meters and dosimeters). TC 85/SC 2 has currently eight active Working Groups (WG) dealing with 14 standards projects, mostly in advanced stages, in such fields as neutron and beta reference radiations, and X and gamma radiations of high and low dose-rates and high energies for calibration purposes, reference radiations for surface contamination apparatus, ejection systems for gamma radiography apparatus, industrial and laboratory irradiators, lead shielding units, protective clothing, thermoluminescence dosemeters, radioelement gauges, and surface contamination and decontamination. (author)

  9. Consistency Across Standards or Standards in a New Business Model

    Russo, Dane M.

    2010-01-01

    Presentation topics include: standards in a changing business model, the new National Space Policy is driving change, a new paradigm for human spaceflight, consistency across standards, the purpose of standards, danger of over-prescriptive standards, a balance is needed (between prescriptive and general standards), enabling versus inhibiting, characteristics of success-oriented standards, characteristics of success-oriented standards, and conclusions. Additional slides include NASA Procedural Requirements 8705.2B identifies human rating standards and requirements, draft health and medical standards for human rating, what's been done, government oversight models, examples of consistency from anthropometry, examples of inconsistency from air quality and appendices of government and non-governmental human factors standards.

  10. Beyond the Standard Model

    Lykken, Joseph D.

    2010-01-01

    'BSM physics' is a phrase used in several ways. It can refer to physical phenomena established experimentally but not accommodated by the Standard Model, in particular dark matter and neutrino oscillations (technically also anything that has to do with gravity, since gravity is not part of the Standard Model). 'Beyond the Standard Model' can also refer to possible deeper explanations of phenomena that are accommodated by the Standard Model but only with ad hoc parameterizations, such as Yukawa couplings and the strong CP angle. More generally, BSM can be taken to refer to any possible extension of the Standard Model, whether or not the extension solves any particular set of puzzles left unresolved in the SM. In this general sense one sees reference to the BSM 'theory space' of all possible SM extensions, this being a parameter space of coupling constants for new interactions, new charges or other quantum numbers, and parameters describing possible new degrees of freedom or new symmetries. Despite decades of model-building it seems unlikely that we have mapped out most of, or even the most interesting parts of, this theory space. Indeed we do not even know what is the dimensionality of this parameter space, or what fraction of it is already ruled out by experiment. Since Nature is only implementing at most one point in this BSM theory space (at least in our neighborhood of space and time), it might seem an impossible task to map back from a finite number of experimental discoveries and measurements to a unique BSM explanation. Fortunately for theorists the inevitable limitations of experiments themselves, in terms of resolutions, rates, and energy scales, means that in practice there are only a finite number of BSM model 'equivalence classes' competing at any given time to explain any given set of results. BSM phenomenology is a two-way street: not only do experimental results test or constrain BSM models, they also suggest - to those who get close enough to listen

  11. NASA's Software Safety Standard

    Ramsay, Christopher M.

    2007-01-01

    NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

  12. Beyond the Standard Model

    Lykken, Joseph D.; /Fermilab

    2010-05-01

    'BSM physics' is a phrase used in several ways. It can refer to physical phenomena established experimentally but not accommodated by the Standard Model, in particular dark matter and neutrino oscillations (technically also anything that has to do with gravity, since gravity is not part of the Standard Model). 'Beyond the Standard Model' can also refer to possible deeper explanations of phenomena that are accommodated by the Standard Model but only with ad hoc parameterizations, such as Yukawa couplings and the strong CP angle. More generally, BSM can be taken to refer to any possible extension of the Standard Model, whether or not the extension solves any particular set of puzzles left unresolved in the SM. In this general sense one sees reference to the BSM 'theory space' of all possible SM extensions, this being a parameter space of coupling constants for new interactions, new charges or other quantum numbers, and parameters describing possible new degrees of freedom or new symmetries. Despite decades of model-building it seems unlikely that we have mapped out most of, or even the most interesting parts of, this theory space. Indeed we do not even know what is the dimensionality of this parameter space, or what fraction of it is already ruled out by experiment. Since Nature is only implementing at most one point in this BSM theory space (at least in our neighborhood of space and time), it might seem an impossible task to map back from a finite number of experimental discoveries and measurements to a unique BSM explanation. Fortunately for theorists the inevitable limitations of experiments themselves, in terms of resolutions, rates, and energy scales, means that in practice there are only a finite number of BSM model 'equivalence classes' competing at any given time to explain any given set of results. BSM phenomenology is a two-way street: not only do experimental results test or constrain BSM models, they also suggest

  13. Standard Wiggler magnets

    Winick, H.; Helm, R.H.

    1977-09-01

    Interest in Wiggler magnets (a close sequence of transverse fields with alternating polarity) to extend and enhance the spectrum of synchrotron radiation from electron storage rings has increased significantly during the past few years. Standard wigglers, i.e., wigglers in which interference effects on the spectrum of synchrotron radiation are not important, are considered. In standard wigglers the spectrum of synchrotron radiation has the same general shape as the spectrum from ring bending magnets. However, the critical energy of the wiggler spectrum may be different. The critical energy of the wiggler spectrum is given by epsilon/sub CW/ = epsilon/sub CB/(B/sub W//B/sub B/) where epsilon/sub CB/ is the critical energy from the bending magnets and B/sub W/ and B/sub B/ are the magnetic field strengths of the wiggler magnet and bending magnets respectively. Since most electron storage rings operate with relatively low bending magnet fields (B/sub B/ less than or equal to 12 kG), even a modest wiggler magnet field (less than or equal to 18 kG) can significantly increase the critical energy. Such magnets are planned for ADONE and SPEAR. Higher field (30 to 50 kG) superconducting magnets are planned at Brookhaven, Daresbury, and Novosibirsk to produce even larger increase in the critical energy. For some standard wigglers a further enhancement of the spectrum is produced due tothe superposition of the radiation from the individual poles. Wiggler designs are discussed as well as the effect of wigglers on the synchrotron radiation spectrum and on the operation of storage rings

  14. Standardization of biodosimetry operations

    Dainiak, Nicholas

    2016-01-01

    Methods and procedures for generating, interpreting and scoring the frequency of dicentric chromosomes vary among cytogenetic biodosimetry laboratories (CBLs). This variation adds to the already considerable lack of precision inherent in the dicentric chromosome assay (DCA). Although variability in sample collection, cell preparation, equipment and dicentric frequency scoring can never be eliminated with certainty, it can be substantially minimized, resulting in reduced scatter and improved precision. Use of standard operating procedures and technician exchange may help to mitigate variation. Although the development and adoption of international standards (ISO 21243 and ISO 19238) has helped to reduce variation in standard operating procedures (SOPs), all CBLs must maintain process improvement, and those with challenges may require additional assistance. Sources of variation that may not be readily apparent in the SOPs for sample collection and processing include variability in ambient laboratory conditions, media, serum lot and quantity and the use of particular combinations of cytokines. Variability in maintenance and calibration of metafer equipment, and in scoring criteria, reader proficiency and personal factors may need to be addressed. The calibration curve itself is a source of variation that requires control, using the same known-dose samples among CBLs, measurement of central tendency, and generation of common curves with periodic reassessment to detect drifts in dicentric yield. Finally, the dose estimate should be based on common scoring criteria, using of the z-statistic. Although theoretically possible, it is practically impossible to propagate uncertainty over the entire calibration curve due to the many factors contributing to variance. Periodic re-evaluation of the curve is needed by comparison with newly published curves (using statistical analysis of differences) and determining their potential causes. (author)

  15. Hazard Communication Standard

    Sichak, S.

    1991-01-01

    The current rate of technological advances has brought with it an overwhelming increase in the usage of chemicals in the workplace and in the home. Coupled to this increase has been a heightened awareness in the potential for acute and chronic injuries attributable to chemical insults. The Hazard Communication Standard has been introduced with the desired goal of reducing workplace exposures to hazardous substances and thereby achieving a corresponding reduction in adverse health effects. It was created and proclaimed by the US Department of Labor and regulated by the Occupational Safety and Health Administration. 1 tab

  16. Quasi standard model physics

    Peccei, R.D.

    1986-01-01

    Possible small extensions of the standard model are considered, which are motivated by the strong CP problem and by the baryon asymmetry of the Universe. Phenomenological arguments are given which suggest that imposing a PQ symmetry to solve the strong CP problem is only tenable if the scale of the PQ breakdown is much above M W . Furthermore, an attempt is made to connect the scale of the PQ breakdown to that of the breakdown of lepton number. It is argued that in these theories the same intermediate scale may be responsible for the baryon number of the Universe, provided the Kuzmin Rubakov Shaposhnikov (B+L) erasing mechanism is operative. (orig.)

  17. Tritium dosimetry and standardization

    Balonov, M.I.

    1983-01-01

    Actual problem of radiation hygiene such as an evaluation of human irradiation hazard due to a contact with tritium compounds both in industrial and public spheres is under discussion. Sources of tritium release to environment are characterized. Methods of tritium radiation monitoring are discussed. Methods of dosimetry of internal human exposure resulted from tritium compounds are developed on the base of modern representations on metbolism and tritium radiobiological effect. A system of standardization of permissible intake of tritium compounds for personnel and persons of population is grounded. Some protection measures are proposed as applied to tritium overdosage

  18. Non-standard antennas

    Le Chevalier, Francois; Staraj, Robert

    2013-01-01

    This book aims at describing the wide variety of new technologies and concepts of non-standard antenna systems - reconfigurable, integrated, terahertz, deformable, ultra-wideband, using metamaterials, or MEMS,  etc, and how they open the way to a wide range of applications, from personal security and communications to multifunction radars and towed sonars, or satellite navigation systems, with space-time diversity on transmit and receive. A reference book for designers  in this lively scientific community linking antenna experts and signal processing engineers.

  19. Standard-model bundles

    Donagi, Ron; Pantev, Tony; Waldram, Dan; Donagi, Ron; Ovrut, Burt; Pantev, Tony; Waldram, Dan

    2002-01-01

    We describe a family of genus one fibered Calabi-Yau threefolds with fundamental group ${\\mathbb Z}/2$. On each Calabi-Yau $Z$ in the family we exhibit a positive dimensional family of Mumford stable bundles whose symmetry group is the Standard Model group $SU(3)\\times SU(2)\\times U(1)$ and which have $c_{3} = 6$. We also show that for each bundle $V$ in our family, $c_{2}(Z) - c_{2}(V)$ is the class of an effective curve on $Z$. These conditions ensure that $Z$ and $V$ can be used for a phenomenologically relevant compactification of Heterotic M-theory.

  20. Constructing in the monument. Respecting the Old and mark the New. Cost-reliable planning during building upon existing structures; Bauen im Denkmal. Altes achten und Neues kenntlich machen. Kostensicher planen beim Bauen im Bestand

    Schneider-Sorger, Roswitha [ORCA Software GmbH, Rosenheim (Germany)

    2011-07-01

    The revitalization of historically protected real estate is a passion of the owners - the family Werndl (Rosenheim, Federal Republic of Germany). In the case of the Old spinning mill in the Kolbenmotor near Rosenheim a whole district was arranged new. The highest premise of the planning team Quest Architekten GBR (Rosenheim, Federal Republic of Germany) was to respect and receive the rough charm of the building stock. This also becomes clear considering the two-storey Batteur building of 1862 being a component of the energy centre of the spinning mill. Once cotton was cleaned, now shops and gastronomy are in the ground floor as well as practices and office units in the upper floor.

  1. Status of conversion of NE standards to national consensus standards

    Jennings, S.D.

    1990-06-01

    One major goal of the Nuclear Standards Program is to convert existing NE standards into national consensus standards (where possible). This means that an NE standard in the same subject area using the national consensus process. This report is a summary of the activities that have evolved to effect conversion of NE standards to national consensus standards, and the status of current conversion activities. In some cases, all requirements in an NE standard will not be incorporated into the published national consensus standard because these requirements may be considered too restrictive or too specific for broader application by the nuclear industry. If these requirements are considered necessary for nuclear reactor program applications, the program standard will be revised and issued as a supplement to the national consensus standard. The supplemental program standard will contain only those necessary requirements not reflected by the national consensus standard. Therefore, while complete conversion of program standards may not always be realized, the standards policy has been fully supported in attempting to make maximum use of the national consensus standard. 1 tab

  2. European standards for composite construction

    Stark, J.W.B.

    2000-01-01

    The European Standards Organisation (CEN) has planned to develop a complete set of harmonized European building standards. This set includes standards for composite steel and concrete buildings and bridges. The Eurocodes, being the design standards, form part of this total system of European

  3. Repeated Interaction in Standard Setting

    Larouche, Pierre; Schütt, Florian

    2016-01-01

    As part of the standard-setting process, certain patents become essential. This may allow the owners of these standard-essential patents to hold up implementers of the standard, who can no longer turn to substitute technologies. However, many real-world standards evolve over time, with several

  4. Standard cross-section data

    Carlson, A.D.

    1984-01-01

    The accuracy of neutron cross-section measurement is limited by the uncertainty in the standard cross-section and the errors associated with using it. Any improvement in the standard immediately improves all cross-section measurements which have been made relative to that standard. Light element, capture and fission standards are discussed. (U.K.)

  5. Spillover effects of international standards

    Trifkovic, Neda

    Most studies focus on trade effects and organizational outcomes of international standards, neglecting the effect of standards on employees. Using a two-year matched firm–employee panel dataset, this paper finds that the application of standards improves work conditions in small and medium....... The study reveals unexpected benefits from certification, calling for higher investment in standards....

  6. XML Diagnostics Description Standard

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  7. Standards for Lithotripter Performance

    Schultheiss, Reiner; Doerffel, Michael

    2008-09-01

    Standards for lithotripsy have been developed by the International Electrotechnical Commission (IEC) and the FDA. In addition to the existing regulations and norms for the manufacturers, special standards were developed to address a treatment method developed in the early 1980's using extracorporeal shock waves. Initially, the FDA regulated the premarket approval process for lithotripters as a Class III device but reclassified lithotripters in 2000 to a Class II device. The corresponding guidance document for showing the substantial equivalence of new devices with predicate devices will be described in detail. The FDA guidance document is very useful in helping device manufacturers: (i) develop technical performance testing for a shock wave lithotripter within the parameters of an FDA submission, and (ii) conduct clinical performance testing via at least one clinical confirmation study with a small number of subjects. Unfortunately although the submitted data are available at the FDA they are not available in the marketplace and this causes difficulties for physicians in deciding which device to use. The results of the technical performance testing of the LithoGold™ are provided.

  8. Standards for backscattering analysis

    Mitchell, I.V.; Eschbach, H.L.

    1978-01-01

    The need for backscattering standards appears to be twofold and depends on the uses and requirements of the users. The first is as a calibrated reference by which samples of a similar nature to the standard may be absolutely compared. The second is as a means of intercomparing the relative results obtained by different laboratories using, as near as possible, identical samples. This type of comparison is of a relative nature and the absolute values are not necessarily required. In the present work the authors try to satisfy both needs by providing identical samples which have been absolutely calibrated to a high accuracy. Very thin copper and vanadium layers were evaporated onto bismuth implanted silicon crystals and on glass plates under carefully controlled conditions. The mass of the deposits was determined in situ using a sensitive UHV microbalance. In addition, two quartz oscillator monitors were used. The samples have been analysed by Rutherford backscattering and the absolute quantity of bismuth determined by a comparison with the known amounts of deposited material. (Auth.)

  9. The standard model

    Marciano, W.J.

    1994-03-01

    In these lectures, my aim is to provide a survey of the standard model with emphasis on its renormalizability and electroweak radiative corrections. Since this is a school, I will try to be somewhat pedagogical by providing examples of loop calculations. In that way, I hope to illustrate some of the commonly employed tools of particle physics. With those goals in mind, I have organized my presentations as follows: In Section 2, renormalization is discussed from an applied perspective. The technique of dimensional regularization is described and used to define running couplings and masses. The utility of the renormalization group for computing leading logs is illustrated for the muon anomalous magnetic moment. In Section 3 electroweak radiative corrections are discussed. Standard model predictions are surveyed and used to constrain the top quark mass. The S, T, and U parameters are introduced and employed to probe for ''new physics''. The effect of Z' bosons on low energy phenomenology is described. In Section 4, a detailed illustration of electroweak radiative corrections is given for atomic parity violation. Finally, in Section 5, I conclude with an outlook for the future

  10. The illusory nature of standards

    Linneberg, Mai Skjøtt

    2011-01-01

    Purpose – The purpose of this paper is to investigate the implications of the paradoxical situation in which standard setters are placed when standardising human practice. Contrary to standards, human practices are ambiguous, heterogeneous, and highly context dependent; in contrast, standards...... creation is innate in the practice of standardisation and therefore the risk of creating untrustworthy standards is prevalent for standard setters. Originality/value – The paper provides a new understanding of standards and demonstrates the need to research standardization processes in depth and bring...

  11. Energy-efficient building - Deficits in higher education; Energieeffizientes Bauen - Defizite in der Hochschulausbildung, Teil 1/3

    Lang, T.; Messmer, R. [K.M. Marketing AG, Winterthur (Switzerland); Kunz, M. [Zuercher Hochschule Winterthur, Zentrum Sustainability, Winterthur (Switzerland)

    2005-07-01

    This report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined the courses of study offered by Swiss Universities of Applied Science and the Federal Institutes of Technology that are concerned with the use of energy in the building area. The results of the survey are presented and commented on. The authors are of the opinion that basic courses of study fulfil their task of knowledge-transfer in the areas concerning energy, ecology, environment and sustainability, although the educational structures used are complex. The importance of interdisciplinary work is stressed. The focus of knowledge-transfer on persons under 40 years of age is criticised as well as deficits in interdisciplinary teamwork. The authors recommend the setting-up of further education programmes for older architects and professionals in the building technical services area.

  12. Solar building construction. Special edition of the journal 'Sonnenenergie'; Solares Bauen. Sonderheft der Sonnenenergie

    Rust, A. (comp.)

    2003-10-01

    This special issue of October 2003 reviews solar architecture, planning, applications, technology, market and knowledge. Subjects: Falkenweg housing development; Q-Cells solar factory; Modehaus Zara building; Haus Westermayr McCready building; Federal Environmental Office building, Dessau; 'Haus im Himmel' building; NRW state representatives building in Berlin; Zero-emission building 'Sunny Woods', Zurich; Hellerau workshop buildings, Dresden; HOCHTIEF PRISMA Haus building, Frankfurt; Solar government buildings, Berlin; SOLARBAU programme; Energy supply concepts based on photovoltaic power supply; Solar cooling; Photovoltaic lamellas; Solar building construction; Solar contracting; Solar building modernisation; Integrated PV systems in Europe; Living in passive buildings; Funding programmes for renewable energy sources and building construction. (orig./AKF)

  13. Energy and Environmental Research in the Building Area; Forschen und Bauen im Kontext von Energie und Umwelt

    Binz, A. [Fachhochschule Nordwestschweiz (HABG-IEB), Muttenz (Switzerland); Chianese, D. [Scuola Universitaria Professionale della Svizzera Italiana, Dipartimento Ambiente Costruzioni e Design, Instituto di Sostenibilita Applicata all' Ambiente Costruito (SUPSI-DACD-ISAAC), Canobbio (Switzerland); Filleux, Ch. [Basler und Hofmann, Zuerich (Switzerland); Gaegauf, Ch. [Oekozentrum Langenbruck, Langenbruck (Switzerland); Gugerli, H. [Amt fuer Hochbauten der Stadt Zuerich, Zuerich (Switzerland); Menti, U.-P. [Hochschule Luzern, Technik und Architektur, Horw (Switzerland); Rommel, M. [Hochschule fuer Technik, Institut fuer Solartechnik (SPF), Rapperswil (Switzerland); Schwehr, P. [brenet, building and renewable energies network of technology, HTA Luzern, Horw (Switzerland); Zimmermann, M. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland)

    2010-07-01

    These proceedings of the 16{sup th} Swiss Status Seminar held in September 2010 at the Swiss Federal Institute of Technology ETH in Zurich, Switzerland, present a comprehensive overview of the two-day event on Swiss energy and environmental topics in the building area. A total of 55 lectures in ten sessions covered architectural and building topics. The main lectures at the beginning of the seminar covered models for sustainable city development, building for the 2000-watt society and design principles. Also the 'Tropical House' project, the 'Self' autonomous house, the new Monte Rosa mountaineers hut and the Swiss Village project in Masdar were presented. The presentations were divided into nine thematic areas: The house as a 'power station', building renewal, energy management, heat pumps, processes, innovative building and renovation, city districts, building technologies, ventilation and the building as a system. Twenty poster contributions completed the seminar. Themes addressed in the 'house as a power station' set looked at the local generation of power, buildings that generate or even export energy and low-energy consumption buildings. Building renewal topics discussed included grey energy and legal topics, energy management contributions dealt with control, hot water preparation and energy efficiency. The heat pump section dealt with theory and practice of heating and cooling, multi-functional and low-exergy systems and related calculation aids. The processes section included contributions on infra-red analysis, solar-assisted systems, modelling, eco-balances and the City of Zurich's resource strategy for mineral building materials. Innovative building and renovation topics included renovation with prefabricated elements, integrated photovoltaic modules, retrofits as well as financing topics. The topics covered in the district development set included contributions on sustainable (re-)development, the 2000-watt society and future-oriented housing developments. In the building technology and ventilation area comfort and hygiene aspects as well as a report on a multi-storey office building were presented. Finally, buildings were considered as systems in contributions on performance analysis, property management, active-solar systems and simulation techniques.

  14. Government by standards

    Triantafillou, Peter

    2016-01-01

    Since 2009, all Danish hospitals have been subjected to a comprehensive, mandatory accreditation system, the so-called Danish Quality Model (DDKM), in order to assure the quality of hospital services. So far there is no evidence of DDKM’s positive effects on clinical outcome and it may even be co......, it is argued that the accreditation system is hard to refuse because it promises to increase the quality of hospital services and, more importantly, because the procedural standards espoused by DDKM work through the structured and accountable freedom of medical staff....... be contributing to accountability overload. This article seeks to provide an explanation for why hospital staff seems to accept, albeit grudgingly and partially, the imposition of a new, comprehensive accountability system with questionable clinical merits. Inspired by Michel Foucault’s analytics of government...

  15. Standard model baryogenesis

    Gavela, M.B.; Orloff, J.; Pene, O

    1994-01-01

    Simply on CP arguments, we argue against a Standard Model explanation of baryogenesis via the charge transport mechanism. A CP-asymmetry is found in the reflection coefficients of quarks hitting the electroweak phase boundary created during a first order phase transition. The problem is analyzed both in an academic zero temperature case and in the realistic finite temperature one. At finite temperature, a crucial role is played by the damping rate of quasi-quarks in a hot plasma, which induces loss of spatial coherence and suppresses reflection on the boundary even at tree-level. The resulting baryon asymmetry is many orders of magnitude below what observation requires. We comment as well on related works.

  16. Status of Standardization Projects

    1993-12-31

    A5 B 942 943 943 ASM SA 69 D, 8115 056; ASTM D 5118 FABRICATION OF FIBERBOARD SM AS B 941 943 943 A SM SA 69 Di- N 8115 0562 ASTM D 5168 FAB AND...DR&E(AR)759 STANDARDIZATION PROJECTS REPORT - 1ST QTR FY 1994 PREPARING ACTIVITY LISTING PA AAPAA p BPP .A- G/ASA NC AC 21 RC G CSOL- Qý yqFyýFT7RL AL...941 943 943 A SM SA 69 DH N 8115 0562 ASTM D 5168 FAB AND CLOSURE TRIPLE WALL SM AS B 941 943 943 A SM SA 69 DH N 8125 0379 V’L-B-61000 BOTTLES

  17. International standards for radiation protection

    Ambrosi, P.

    2011-01-01

    International standards for radiation protection are issued by many bodies. These bodies differ to a large extent in their organisation, in the way the members are designated and in the way the international standards are authorised by the issuing body. Large differences also exist in the relevance of the international standards. One extreme is that the international standards are mandatory in the sense that no conflicting national standard may exist, the other extreme is that national and international standards conflict and there is no need to resolve that conflict. Between these extremes there are some standards or documents of relevance, which are not binding by any formal law or contract but are de facto binding due to the scientific reputation of the issuing body. This paper gives, for radiation protection, an overview of the main standards issuing bodies, the international standards or documents of relevance issued by them and the relevance of these documents. (authors)

  18. Telemetry Standards, RCC Standard 106-17. Chapter 3. Frequency Division Multiplexing Telemetry Standards

    2017-07-01

    Standard 106-17 Chapter 3, July 2017 3-5 Table 3-4. Constant-Bandwidth FM Subcarrier Channels Frequency Criteria\\Channels: A B C D E F G H Deviation ...Telemetry Standards , RCC Standard 106-17 Chapter 3, July 2017 3-i CHAPTER 3 Frequency Division Multiplexing Telemetry Standards Acronyms...Frequency Division Multiplexing Telemetry Standards ................................ 3-1 3.1 General

  19. A Note on Standard Deviation and Standard Error

    Hassani, Hossein; Ghodsi, Mansoureh; Howell, Gareth

    2010-01-01

    Many students confuse the standard deviation and standard error of the mean and are unsure which, if either, to use in presenting data. In this article, we endeavour to address these questions and cover some related ambiguities about these quantities.

  20. Wavelength standards in the infrared

    Rao, KN

    2012-01-01

    Wavelength Standards in the Infrared is a compilation of wavelength standards suitable for use with high-resolution infrared spectrographs, including both emission and absorption standards. The book presents atomic line emission standards of argon, krypton, neon, and xenon. These atomic line emission standards are from the deliberations of Commission 14 of the International Astronomical Union, which is the recognized authority for such standards. The text also explains the techniques employed in determining spectral positions in the infrared. One of the techniques used includes the grating con

  1. A standard graphite block

    Ivkovic, M; Zdravkovic, Z; Sotic, O [Department of Reactor Physics and Dynamics, Boris Kidric Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

    1966-04-15

    A graphite block was calibrated for the thermal neutron flux of the Ra-Be source using indium foils as detectors. Experimental values of the thermal neutron flux along the central vertical axis of the system were corrected for the self-shielding effect and depression of flux in the detector. The experimental values obtained were compared with the values calculated on the basis of solving the conservation neutron equation by the continuous slowing-down theory. In this theoretical calculation of the flux the Ra-Be source was divided into three resonance energy regions. The measurement of the thermal neutron diffusion length in the standard graphite block is described. The measurements were performed in the thermal neutron region of the system. The experimental results were interpreted by the diffusion theory for point thermal neutron source in the finite system. The thermal neutron diffusion length was calculated to be L= 50.9 {+-}3.1 cm for the following graphite characteristics: density = 1.7 g/cm{sup 3}; boron content = 0.1 ppm; absorption cross section = 3.7 mb.

  2. Beyond the standard model

    Domokos, G.; Elliott, B.; Kovesi-Domokos, S.; Mrenna, S.

    1992-01-01

    In this paper the authors briefly review the necessity of going beyond the Standard Model. We argue that certain types of composite models of quarks and leptons may resolve some of the difficulties of the SM. Furthermore the authors argue that, even without a full specification of a composite model, one may predict some observable effects following from the compositeness hypothesis. The effects are most easily seen in reaction channels in which there is little competition from known processes predicted by the SM, typically in neutrino induced reactions. The authors suggest that above a certain characteristic energy, neutrino cross sections rise well above those predicted within the framework of the SM and the difference between the characteristic features of lepton and hadron induced reactions is blurred. The authors claim that there is some (so far, tenuous) evidence for the phenomenon we just alluded to: in certain high energy cosmic ray interactions it appears that photons and/or neutrinos behave in a manner which is inconsistent with the SM. The authors analyze the data and conclude that the origin of the anomaly in the observational data arises from an increased neutrino interaction cross section

  3. A standard graphite block

    Ivkovic, M.; Zdravkovic, Z.; Sotic, O.

    1966-04-01

    A graphite block was calibrated for the thermal neutron flux of the Ra-Be source using indium foils as detectors. Experimental values of the thermal neutron flux along the central vertical axis of the system were corrected for the self-shielding effect and depression of flux in the detector. The experimental values obtained were compared with the values calculated on the basis of solving the conservation neutron equation by the continuous slowing-down theory. In this theoretical calculation of the flux the Ra-Be source was divided into three resonance energy regions. The measurement of the thermal neutron diffusion length in the standard graphite block is described. The measurements were performed in the thermal neutron region of the system. The experimental results were interpreted by the diffusion theory for point thermal neutron source in the finite system. The thermal neutron diffusion length was calculated to be L= 50.9 ±3.1 cm for the following graphite characteristics: density = 1.7 g/cm 3 ; boron content = 0.1 ppm; absorption cross section = 3.7 mb

  4. Standard Errors for Matrix Correlations.

    Ogasawara, Haruhiko

    1999-01-01

    Derives the asymptotic standard errors and intercorrelations for several matrix correlations assuming multivariate normality for manifest variables and derives the asymptotic standard errors of the matrix correlations for two factor-loading matrices. (SLD)

  5. Intelligent Transportation Systems : critical standards

    1999-06-01

    Intelligent Transportation Systems (ITS) standards are industry-consensus standards that provide the details about how different systems interconnect and communicate information to deliver the ITS user services described in the National ITS Architect...

  6. Data content standards in Africa

    Cooper, Antony K

    2005-04-01

    Full Text Available Data content standards tend to be more accessible. Easier to understand. Used directly by many end users. Immediately applicable to Africa. More susceptible to culture and language – Hence, more important to have local standards...

  7. Radioactivity standardization in South Africa

    Simpson, BRS

    2002-01-01

    Full Text Available South Africa's national radioactivity measurement standard is maintained at a satellite laboratory in Cape Town by the National Metrology Laboratory (NML) of the Council-for Scientific and Industrial Research. Standardizations are undertaken by a...

  8. Shielding standards: a case history

    Battat, M.E.

    1977-01-01

    A discussion of the sequence of events leading from the inception of a standard to its transmittal to the ANSI Board of Standards Review will be given. The standard referred to is entitled, ''Neutron and Gamma-Ray Flux-to-Dose-Rate Factors,'' (ANSI N666). Certain questions raised during the review process and the compatibility of this standard with the USA Code of Federal Regulations will be discussed

  9. Calibration of surface roughness standards

    Thalmann, R.; Nicolet, A.; Meli, F.

    2016-01-01

    organisations. Five surface texture standards of different type were circulated and on each of the standards several roughness parameters according to the standard ISO 4287 had to be determined. 32 out of 395 individual results were not consistent with the reference value. After some corrective actions...

  10. Secondary standard dosimetry laboratory (SSDL)

    Md Saion bin Salikin.

    1983-01-01

    A secondary Standard Dosimetry Laboratory has been established in the Tun Ismail Research Centre, Malaysia as a national laboratory for reference and standardization purposes in the field of radiation dosimetry. This article gives brief accounts on the general information, development of the facility, programmes to be carried out as well as other information on the relevant aspects of the secondary standard dosimetry laboratory. (author)

  11. Standardization of splash device

    Fernández Raga, María; Peters, Piet

    2017-04-01

    The erosion is a complex process that has been studied extensively by numerous researchers, requiring a prolongued time effort and a large economic investment. To be effective, the measurements of erosion should be precise, controlled and replicable, and to assure efectiveness, measurement devices of erosion should be properly designed, constructed, well calibrated and also they should be operated by a trained person (Stroosnijder, 2005). Because researchers try to improve old devices, the equipment is constantly being redesigned, making the measurements not comparable and furthermore, producing a lack of available standarized device. The lack of standardization of erosion equipment is more obvious in the case of the local splash erosion, where the nature of the process makes very difficult to isolate its effects. In this article we compare the results obtained from five of the most common splash erosion devices (selected from more than 16 different currently types), under the same rain conditions, with the objective of facilitate the standardization of the method that will be more easy to build, minimizing the error. A set of six splash devices were setted in well known positions under simulated rain, to measured the differences, among devices and the accuracy of the data recovered after 10 minutes of rainfall simulation under different intensities (from 60 to 130 mm/h). The rainfall simulator of Wageningen was used, using sand as splash erosion source. Differences in the infiltration were also measured, and a calibration of sizes and speeds of the raindrops was done using the photography method (Hamidreza-Sadeghi et al., 2013). The splash devices selected for this study were unbounded splash devices (like the funnel, the cup (Fernandez-Raga et al., 2010) and the splash flume (Jomaa et al., 2010)), and bounded devices that allow the calculation of splash rate, (like the new cup (Scholten et al., 2011) and the Morgan tray). The behaviour of different splash devices

  12. PUBLISHER'S ANNOUNCEMENT: Refereeing standards

    Bender, C.; Scriven, N.

    2004-08-01

    Wuppertal, Germany (Chaotic and Complex Systems); F W Nijhoff, University of Leeds, UK (Mathematical Physics); G Ghirardi, Universita di Trieste, Italy (Quantum Mechanics and Quantum Information Theory); G Dunne, University of Connecticut, Storrs, USA (Classical and Quantum Field Theory); and L Turner, Los Alamos National Laboratory, NM, USA (Fluid and Plasma Theory). It will be an honour and a pleasure to work together with all these talented people towards the high-minded goal of running a world-class scientific journal. As Editor-in-Chief of J. Phys. A, my principal objective will be to raise the standards of this first-rate journal to even higher levels by raising the quality of accepted papers. I believe that this goal will be possible to accomplish. Despite an already high rejection rate, paper submissions are rising rapidly and I anticipate that we will need to be even more stringent in our assessment of quality next year. A letter has already been sent to referees urging them to raise their standards for acceptance. I believe we will make rapid progress in this direction. (I have heard a few people criticize the journal for being a `write-only' journal. My goal is for the worldwide community of mathematical physicists to view J. Phys. A as essential reading.) I am extremely optimistic about the future of J. Phys. A. I believe that we will raise the standards of acceptance while maintaining the short time from submission to decision. I am confident that we will continue to improve the quality of the papers published in this already first-class journal. I look forward to working with the journal's excellent staff, the Board of Editors, and the Advisory Panel.

  13. Activities of Radiation Standard Section

    Kannan, A.; Rao, P.S.; Sachadev, R.N.; Shaha, V.V.; Sharma, D.; Srivastava, P.K.

    1992-01-01

    A brief account of the various facilities and services provided by the Radiation Standards Section (RSS) of the Bhabha Atomic Research Centre, Bombay is given. RSS maintains the primary and secondary standards of various parameters of radiation measurements. It ensures accurate radiological measurements as per international requirements, through periodic international intercomparisons of national standards. It also provides calibration services to various users of radiation sources and instruments. The activities of RSS are described under the headings: (1) Radiological Metrology Standards, (2) Radionuclide Standards, Neutron Metrology, (4) Instruments Calibration, (5) Non-ionizing Radiations, and (6) Instrumentation. (author). figs., tabs

  14. Vocational High School Effectiveness Standard ISO 9001: 2008 for Achievement Content Standards, Standard Process and Competency Standards Graduates

    Yeni Ratih Pratiwi

    2014-06-01

    Full Text Available Efektivitas Sekolah Menengah Kejuruan Berstandar ISO 9001:2008 terhadap Pencapaian Standar Isi, Standar Proses dan Standar Kompetensi Lulusan Abstract: The purpose of this study was to determine differences in the effectiveness of the achievement of the content standards, process standards, and competency standards in vocational already standard ISO 9001: 2008 with CMS that has not been standardized ISO 9001: 2008 both in public schools and private schools. Data collection using the questionnaire enclosed Likert scale models. Analysis of data using one-way ANOVA using SPSS. The results showed: (1 there is no difference in effectiveness between public SMK ISO standard ISO standards with private SMK (P = 0.001; (2 there are differences in the effectiveness of public SMK SMK ISO standards with ISO standards have not (P = 0.000; (3 there are differences in the effectiveness of public SMK ISO standards with private vocational yet ISO standards (P = 0.000; (4 there are differences in the effectiveness of the private vocational school with vocational standard ISO standard ISO country has not (P = 0.015; (5 there are differences in the effectiveness of the private vocational bertandar ISO with private vocational yet standardized ISO (P = 0.000; (6 there was no difference in the effectiveness of public SMK has not been standardized by the ISO standard ISO private SMK yet. Key Words: vocational high school standards ISO 9001: 2008, the standard content, process standards, competency standards Abstrak: Tujuan penelitian ini untuk mengetahui perbedaan efektivitas pencapaian standar isi, standar proses, dan standar kompetensi lulusan pada SMK yang sudah berstandar ISO 9001:2008 dengan SMK yang belum berstandar ISO 9001:2008 baik pada sekolah negeri maupun sekolah swasta. Pengumpulan data menggunakan kuisioner tertutup model skala likert. Analisis data menggunakan ANOVA one way menggunakan program SPSS. Hasil penelitian menunjukkan: (1 ada perbedaan

  15. Telemetry Standards, RCC Standard 106-17. Chapter 8. Digital Data Bus Acquisition Formatting Standard

    2017-07-01

    incorrect word count/message and illegal mode codes are not considered bus errors. 8.6.2 Source Signal The source of data is a signal conforming to...Telemetry Standards, RCC Standard 106-17 Chapter 8, July 2017 CHAPTER 8 Digital Data Bus Acquisition Formatting Standard Acronyms...check FCS frame check sequence HDDR high-density digital recording MIL-STD Military Standard msb most significant bit PCM pulse code modulation

  16. radioactive waste disposal standards abroad

    Lu Yan; Xin Pingping; Wu Jian; Zhang Xue

    2012-01-01

    With the world focus on human health and environmental protection, the problem of radioactive waste disposal has gradually become a global issue, and the focus of attention of public. The safety of radioactive waste disposal, is not only related to human health and environmental safety, but also an important factor of affecting the sustainable development of nuclear energy. In recent years the formulation of the radioactive waste disposal standards has been generally paid attention to at home and abroad, and it has made great progress. In China, radioactive waste management standards are being improved, and there are many new standards need to be developed. The revised task of implement standards is very arduous, and there are many areas for improvement about methods and procedures of the preparation of standards. This paper studies the current situation of radioactive waste disposal standards of the International Atomic Energy Agency, USA, France, Britain, Russia, Japan, and give some corresponding recommendations of our radioactive waste disposal standards. (authors)

  17. Environmental standards provide competitive advantage

    Chynoweth, E.; Kirshner, E.

    1993-01-01

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. open-quotes It will be similar to auditing our customers to ISO 9000 close-quote, says the environmental manager for a European chemical firm. open-quote We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions close-quote. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard

  18. The German radiation protection standards

    Becker, Klaus; Neider, Rudolf

    1977-01-01

    The German Standards Institute (DIN Deutsches Institut fuer Normung, Berlin) is engaged in health physics standards development in the following committees. The Nuclear Standards Committee (NKe), which deals mainly with nuclear science and technology, the fuel cycle, and radiation protection techniques. The Radiology Standards Committee (FNR), whose responsibilities are traditionally the principles of radiation protection and dosimetry, applied medical dosimetry, and medical health physics. The German Electrotechnical Commission (DKE), which is concerned mostly with instrumentation standards. The Material Testing Committee (FNM), which is responsible for radiation protection in nonmedical radiography. The current body of over one hundred standards and draft standards was established to supplement the Federal German radiation protection legislation, because voluntary standards can deal in more detail with the specific practical problems. The number of standards is steadily expanding due to the vigorous efforts of about thirty working groups, consisting of essentially all leading German experts of this field. Work is supported by the industry and the Federal Government. A review of the present status and future plans, and of the international aspects with regard to European and world (ISO, etc.) standards will be presented

  19. Commensuration and Legitimacy in Standards

    Hale, Lara

    This paper claims that commensuration is a form of valuation crucial for the legitimacy of standards. It is thus far poorly understood how standards are constructed in a legitimate manner, let alone the role of commensuration, the micro-process of converting qualities into measurable quantities...... for the purpose of comparison. The aim is to show how commensuration affects legitimacy at different phases of a standard's formation and diffusion. In order to do this, the lens is placed upon the relationship between the commensuration processes and input and output legitimacies. Research on the Active House...... legitimacy in different stages, either technical for the standard's specifications or contextual for the standard's implementation. Based on these findings, the paper offers a model of the commensurative development undergone in order to develop the legitimacy of a standard....

  20. EG type radioactive calibration standards

    1980-01-01

    EG standards are standards with a radioactive substance deposited as a solution on filtration paper and after drying sealed into a plastic disc or cylinder shaped casing. They serve the official testing of X-ray and gamma spectrometers and as test sources. The table shows the types of used radionuclides, nominal values of activity and total error of determination not exceeding +-4%. Activity of standards is calculated from the charge and the specific activity of standard solution used for the preparation of the standard. Tightness and surface contamination is measured for each standard. The manufacturer, UVVVR Praha, gives a guarantee for the given values of activity and total error of determination. (M.D.)

  1. Towards an international address standard

    Coetzee, S

    2008-02-01

    Full Text Available in a better user experience. Standards compliance allows for the separation of concerns: HTML for content, Cascading Style Sheets (CSS) for presentation and JavaScript for dynamic behaviour. Standards compliant documents are also...) and cascading style sheets through CSS (CSS n.d.), whilst the JavaScript specification has been standardised by Ecma International (another standards organisation for information and communication systems), in the form of EcmaScript (Ecma...

  2. General philosophy of safety standards

    Dunster, H.J.

    1987-01-01

    Safety standards should be related to the form and magnitude of the risk they aim to limit. Because of the lack of direct information at the exposure levels experienced, radiation protection standards have to be based on risk assumptions that, while plausible, are not proven. The pressure for standards has come as much from public perceptions and fears as from the reality of the risk. (author)

  3. Action plan for photovoltaic standards

    Oldach, R.

    1999-07-01

    This report examines the present situation regarding international standards governing photovoltaic (PV) systems and components, and seeks to identify barriers to the commercialisation of PV systems in the UK due to the absence of standards and codes of practice, and develop an action plan to overcome these barriers. An overview of standardisation bodies and standard generation mechanisms is presented, and the PV cells and modules, stand-alone PV systems, utility interconnection with PV systems, and building integration of PV are reviewed.

  4. Standard English and Language Attitudes

    ソランキ, ネイディン

    2005-01-01

    This paper investigates the attitudes and opinions surrounding Standard English (SE) within the United Kingdom. The definition of SE, for the purposes of this study, is standard grammar and standard pronunciation of southern English, commonly referred to as 'BBC English'. The subject of SE and attitudes towards different accents and dialects of British English is emotive and attracts strong opinions. The main issues discussed here are the place of language in society, the social implications ...

  5. The Emerging JBIG2 Standard

    Howard, P.; Kossentini, F.; Martins, Bo

    1998-01-01

    The Joint Bi-level Image Experts Group (JBIG), an international study group affiliated with ISO/IEC and ITU-T, is in the process of drafting a new standard for lossy and lossless compression of bi-level images. The new standard, informally referred to as JBIG2, will support model-based coding...... with imperceptible loss of quality. It is expected that JBIG2 will become an International Standard by 2000....

  6. Standardization of the bakery goods

    Elżbieta Goryńska-Goldmann

    2010-01-01

    The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessi...

  7. Core labour standards and exports

    Siroën, Jean-Marc

    2017-01-01

    (english) Core labour standards defined by the ILO in 1998 are universal, but applied very differently across countries. Compliance is much higher in high income countries. However, the causality between improved labour standards and economic growth remains a controversial issue. Export-led growth strategies might encourage developing countries to curb the process of standards improvement. In this way, they can raise the volume of their unskilled labour endowments (child and/or forced labour)...

  8. Synthesised standards in natural matrices

    Olsen, D.G.

    1980-01-01

    The problem of securing the most reliable standards for the accurate analysis of radionuclides is discussed in the paper and in the comment on the paper. It is contended in the paper that the best standards can be created by quantitative addition of accurately known spiking solutions into carefully selected natural matrices. On the other hand it is argued that many natural materials can be successfully standardized for numerous trace constituents. Both points of view are supported with examples. (U.K.)

  9. Standard-E hydrogen monitoring system shop acceptance test procedure

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  10. Standard-E hydrogen monitoring system shop acceptance test report

    Schneider, T.C.

    1997-01-01

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication

  11. International Electrotechnical Commission standards and French material control standards

    Furet, J.; Weill, J.

    1978-01-01

    There are reported the international standards incorporated into the IEC Subcommitee 45 A (Nuclear Reactor Instrumentation) and the national standards elaborated by the Commissariat a l'Energie Atomique, CEA, Group of normalized control equipment, the degree of application of those being reported on the base design, call of bids and exploitation of nuclear power plants. (J.E. de C)

  12. 77 FR 43196 - Minimum Internal Control Standards and Technical Standards

    2012-07-24

    ... NATIONAL INDIAN GAMING COMMISSION 25 CFR Parts 543 and 547 Minimum Internal Control Standards [email protected] . SUPPLEMENTARY INFORMATION: Part 543 addresses minimum internal control standards (MICS) for Class II gaming operations. The regulations require tribes to establish controls and implement...

  13. Radiological Calibration and Standards Facility

    Federal Laboratory Consortium — PNNL maintains a state-of-the-art Radiological Calibration and Standards Laboratory on the Hanford Site at Richland, Washington. Laboratory staff provide expertise...

  14. Data converters for wireless standards

    Shi, Chunlei

    2002-01-01

    Wireless communication is witnessing tremendous growth with proliferation of different standards covering wide, local and personal area networks (WAN, LAN and PAN). The trends call for designs that allow 1) smooth migration to future generations of wireless standards with higher data rates for multimedia applications, 2) convergence of wireless services allowing access to different standards from the same wireless device, 3) inter-continental roaming. This requires designs that work across multiple wireless standards, can easily be reused, achieve maximum hardware share at a minimum power consumption levels particularly for mobile battery-operated devices.

  15. The Future of Geospatial Standards

    Bermudez, L. E.; Simonis, I.

    2016-12-01

    The OGC is an international not-for-profit standards development organization (SDO) committed to making quality standards for the geospatial community. A community of more than 500 member organizations with more than 6,000 people registered at the OGC communication platform drives the development of standards that are freely available for anyone to use and to improve sharing of the world's geospatial data. OGC standards are applied in a variety of application domains including Environment, Defense and Intelligence, Smart Cities, Aviation, Disaster Management, Agriculture, Business Development and Decision Support, and Meteorology. Profiles help to apply information models to different communities, thus adapting to particular needs of that community while ensuring interoperability by using common base models and appropriate support services. Other standards address orthogonal aspects such as handling of Big Data, Crowd-sourced information, Geosemantics, or container for offline data usage. Like most SDOs, the OGC develops and maintains standards through a formal consensus process under the OGC Standards Program (OGC-SP) wherein requirements and use cases are discussed in forums generally open to the public (Domain Working Groups, or DWGs), and Standards Working Groups (SWGs) are established to create standards. However, OGC is unique among SDOs in that it also operates the OGC Interoperability Program (OGC-IP) to provide real-world testing of existing and proposed standards. The OGC-IP is considered the experimental playground, where new technologies are researched and developed in a user-driven process. Its goal is to prototype, test, demonstrate, and promote OGC Standards in a structured environment. Results from the OGC-IP often become requirements for new OGC standards or identify deficiencies in existing OGC standards that can be addressed. This presentation will provide an analysis of the work advanced in the OGC consortium including standards and testbeds

  16. Standardization of the bakery goods

    Elżbieta Goryńska-Goldmann

    2010-01-01

    Full Text Available The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessity of legal regulations of this issue by standard regulations was pointed out.

  17. Non-standard patch test

    Astri Adelia

    2018-06-01

    Full Text Available In managing contact dermatitis, identification of the causative agent is essential to prevent recurrent complaints. Patch test is the gold standard to identify the causative agent. Nowadays, there are many patch test standard materials available in the market, but do not include all the materials that potentially cause contact dermatitis. Patch test using patient’s own products or later we refer to as non-standard materials, is very helpful in identifying the causative agents of contact dermatitis. Guidance is needed in producing non-standard patch test materials in order to avoid test results discrepancy.

  18. IMPLEMENTING A RISK MANAGEMENT STANDARD

    Constantin PREDA

    2013-01-01

    Full Text Available After risk management “conquered” more and more project managers’ minds and showed its benefits for business and programs, the need to have a global risk management standard has become a crucial issue in the world of risk management. But having a global risk management standard has been a big challenge, starting from the decision of developing the standard (March-June 2005, to the moment of publishing it, November 2009. So, developing the ISO 31000:2009 standard has been more or less like a bumpy ride. Apparently, the people involved in developing the global risk management standard understood from the very beginning that no challenges are too big, nor any tasks too small and that the task of having a new, comprehensive global risk management standard should be completed with excellence: defining the principles and the framework guiding the risk management process applicable for all type of organizations and for a wide range of activities. Coming up with a global standard should always be based on the real organizations’ needs and should fulfill real risk management requirements. The article is trying to present the pros and cons of risk management standard implementation, challenging the implementation process itself and the added value of implementing the standard due to the lack of implementation enablers, like risk culture, a real problem especially in an international environment.

  19. Tree value conversion standards revisited

    Paul S. DeBald; Martin E. Dale; Martin E. Dale

    1991-01-01

    Updated tree value conversion standards (TVCS) are presented for 12 important hardwood species of the oak-hickory forest. These updated standards-developed for each species by butt-log grade, merchantable height, and diameter at breast height-reflect the changes in lumber prices and in conversion costs which have occurred since 1976 when the original TVCS were...

  20. The metabolomics standards initiative (MSI)

    Fiehn, O.; Robertson, D.; Griffin, J.; Werf, M. van der; Nikolau, B.; Morrison, N.; Sumner, L.W.; Goodacre, R.; Hardy, N.W.; Taylor, C.; Fostel, J.; Kristal, B.; Kaddurah-Daouk, R.; Mendes, P.; Ommen, B. van; Lindon, J.C.; Sansone, S.-A.

    2007-01-01

    In 2005, the Metabolomics Standards Initiative has been formed. An outline and general introduction is provided to inform about the history, structure, working plan and intentions of this initiative. Comments on any of the suggested minimal reporting standards are welcome to be sent to the open

  1. Energy informatics: Fundamentals and standardization

    Biyao Huang

    2017-06-01

    Full Text Available Based on international standardization and power utility practices, this paper presents a preliminary and systematic study on the field of energy informatics and analyzes boundary expansion of information and energy system, and the convergence of energy system and ICT. A comprehensive introduction of the fundamentals and standardization of energy informatics is provided, and several key open issues are identified.

  2. PIAAC Technical Standards and Guidelines

    OECD Publishing, 2014

    2014-01-01

    The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

  3. Electroweak interaction: Standard and beyond

    Harari, H.

    1987-02-01

    Several important topics within the standard model raise questions which are likely to be answered only by further theoretical understanding which goes beyond the standard model. In these lectures we present a discussion of some of these problems, including the quark masses and angles, the Higgs sector, neutrino masses, W and Z properties and possible deviations from a pointlike structure. 44 refs

  4. Standards development status. Summary report

    1981-12-01

    The Standards Development Status Summary Report is designed for scheduling, monitoring, and controlling the process by which Regulatory Standards, Guides, Reports, Petitions, and Environmental Statements are written. It is a summary of the current schedule plans for development of the above products

  5. Mapping standards for home networking

    Kaa, G. van de; Hartog, F.T.H. den; Vries, H.J. de

    2009-01-01

    In this study, we apply a step-by-step approach for the identification of standards for home networking. We develop a classification and we use this classification to categorize sixty-four (sets of) standards. By developing this categorization, we have brought order to the chaos of home networking

  6. Standard model without Higgs particles

    Kovalenko, S.G.

    1992-10-01

    A modification of the standard model of electroweak interactions with the nonlocal Higgs sector is proposed. Proper form of nonlocality makes Higgs particles unobservable after the electroweak symmetry breaking. They appear only as a virtual state because their propagator is an entire function. We discuss some specific consequences of this approach comparing it with the conventional standard model. (author). 12 refs

  7. Standardization of Keyword Search Mode

    Su, Di

    2010-01-01

    In spite of its popularity, keyword search mode has not been standardized. Though information professionals are quick to adapt to various presentations of keyword search mode, novice end-users may find keyword search confusing. This article compares keyword search mode in some major reference databases and calls for standardization. (Contains 3…

  8. The radiation safety standards programme

    Bilbao, A.A.

    2000-01-01

    In this lecture the development of radiation safety standards by the IAEA which is a statutory function of the IAEA is presented. The latest editions of the basic safety standards published by the IAEA in cooperation with ICRP, FAO, ILO, NEA/OECD, PAHO and WHO are reviewed

  9. Simplified propagation of standard uncertainties

    Shull, A.H.

    1997-01-01

    An essential part of any measurement control program is adequate knowledge of the uncertainties of the measurement system standards. Only with an estimate of the standards'' uncertainties can one determine if the standard is adequate for its intended use or can one calculate the total uncertainty of the measurement process. Purchased standards usually have estimates of uncertainty on their certificates. However, when standards are prepared and characterized by a laboratory, variance propagation is required to estimate the uncertainty of the standard. Traditional variance propagation typically involves tedious use of partial derivatives, unfriendly software and the availability of statistical expertise. As a result, the uncertainty of prepared standards is often not determined or determined incorrectly. For situations meeting stated assumptions, easier shortcut methods of estimation are now available which eliminate the need for partial derivatives and require only a spreadsheet or calculator. A system of simplifying the calculations by dividing into subgroups of absolute and relative uncertainties is utilized. These methods also incorporate the International Standards Organization (ISO) concepts for combining systematic and random uncertainties as published in their Guide to the Expression of Measurement Uncertainty. Details of the simplified methods and examples of their use are included in the paper

  10. Premise for Standardized Sepsis Models.

    Remick, Daniel G; Ayala, Alfred; Chaudry, Irshad; Coopersmith, Craig M; Deutschman, Clifford; Hellman, Judith; Moldawer, Lyle; Osuchowski, Marcin

    2018-06-05

    Sepsis morbidity and mortality exacts a toll on patients and contributes significantly to healthcare costs. Preclinical models of sepsis have been used to study disease pathogenesis and test new therapies, but divergent outcomes have been observed with the same treatment even when using the same sepsis model. Other disorders such as diabetes, cancer, malaria, obesity and cardiovascular diseases have used standardized, preclinical models that allow laboratories to compare results. Standardized models accelerate the pace of research and such models have been used to test new therapies or changes in treatment guidelines. The National Institutes of Health (NIH) mandated that investigators increase data reproducibility and the rigor of scientific experiments and has also issued research funding announcements about the development and refinement of standardized models. Our premise is that refinement and standardization of preclinical sepsis models may accelerate the development and testing of potential therapeutics for human sepsis, as has been the case with preclinical models for other disorders. As a first step towards creating standardized models, we suggest 1) standardizing the technical standards of the widely used cecal ligation and puncture model and 2) creating a list of appropriate organ injury and immune dysfunction parameters. Standardized sepsis models could enhance reproducibility and allow comparison of results between laboratories and may accelerate our understanding of the pathogenesis of sepsis.

  11. Standards and (self)implosion

    Brøgger, Katja; Staunæs, Dorthe

    2016-01-01

    of standards often tends to conceptualize the travelling of standards as contagious processes resulting in epidemic spreads. In this article, the abstract metaphor of epidemic spread is replaced by an analytical configuration of a new mode of educational governance in which orchestrating webs of incentives...

  12. Section for Standard and Patents - Standardization and Patents

    Wojtowicz, S.; Trechcinski, R.; Rybka, M.; Ryszkowska, A.; Wardaszko, J.

    1997-01-01

    Full text: The most important tasks of the Section in 1996 were: preparation of national standards and program of future work on standards for nuclear instrumentation and electronic equipment in nuclear engineering; organization of activities and participation in the meetings of the Commissions for Standardization No 173 Microprocessor Systems, No 266 Nuclear Instrumentation; giving opinions and expertises on national and international standards for equipment in nuclear engineering; cooperation with the Commission for Standardization No 246 Radiological Protection; control of inventiveness activity; The quality of the technical products is being improved by: a) selection of the proper types of interface systems, technical coordination and quality control; b) creation of standards at a high technical level; The Section works mainly for the Polish Committee for Standardization, the National Atomic Energy Agency, Association of Polish Electrical Engineers and Research Institutes in Poland. The activity of the Section is useful for all national institutions where backplane busses and nuclear electronic equipment is produced or used. The Section participates in the following international organizations: IEC (International Electrotechnical Commission) TC 45 (Nuclear Instrumentation); ISO/IEC Joint Technical Committee ISO/IEC JTCl SC26 (Microprocessor systems); ESONE (European Studies on Norms for Electronics); The section takes part in popularization of nuclear technology and instrumentation in the following ways: distribution of standards and technical documentation to national institutions dealing with nuclear apparatus; collecting and distributing technical information from international organizations (e.g. ESONE); organization of technical and scientific, national and international conferences (New Generation Nuclear Power Plants - September 96, QNX in Real World - January 96); participation in the technical conference organized by the Polish Committee for

  13. Experimental Standards in Sustainability Transitions

    Hale, Lara Anne

    In this thesis I address how experimental standards are used in the new governance paradigm to further sustainability transitions. Focusing on the case of the Active House standard in the building sector, I investigate experimental standards in three research papers examining the following dynamics......: (1) the relationship between commensuration and legitimacy in the formulation and diffusion of a standard’s specifications; (2) the role of awareness in standardizing green default rules to establish sustainable consumption in buildings; and (3) the significance of focus on humans in the development...... of technological standards for sustainable building. Launching from a critical realist social ontology, I collected ethnographic data on the Active House Alliance, its cofounder VELUX, and three of their demonstration building projects in Austria, Germany, and Belgium over the course of three years from 2013...

  14. Development of fusion safety standards

    Longhurst, G.R.; Petti, D.A.; Dinneen, G.A.; Herring, J.S.; DeLooper, J.; Levine, J.D.; Gouge, M.J.

    1996-01-01

    Two new U.S. Department of Energy (DOE) standards have been prepared to assist in the design and regulation of magnetic fusion facilities. They are DOE-STD-6002-96, 'Safety of Magnetic Fusion Facilities - Requirements,' and DOE-STD-6003-96 'Safety of Magnetic Fusion Facilities - Guidance.' The first standard sets forth requirements, mostly based on the Code of Federal Regulations, deemed necessary for the safe design and operation of fusion facilities and a set of safety principles to use in the design. The second standard provides guidance on how to meet the requirements identified in DOE-STD-6002-96. It is written specifically for a facility such as the International Thermonuclear Experimental Reactor (ITER) in the DOE regulatory environment. As technical standards, they are applicable only to the extent that compliance with these standards is included in the contracts of the developers. 7 refs., 1 fig

  15. PWR standardization: The French experience

    Bacher, P.E.

    1987-01-01

    After a short historical review of the French PWR programme with 45000 MWe in operation and 15000 MWe under construction, the paper first develops the objectives and limits of the standardizatoin policy. Implementation of standardization is described through successive reactor series and feedback of experience, together with its impact on safety and on codes and standards. Present benefits of standardization range from low engineering costs to low backfitting costs, via higher quality, reduction in construction times and start-up schedules and improved training of operators. The future of the French programme into the 1990's is again with an advanced standardized series, the N4-1400 MW plant. There is no doubt that the very positive experience with standardization is relevant to any country trying to achieve self-reliance in the nuclear power field. (author)

  16. APS beamline standard components handbook

    Kuzay, T.M.

    1992-01-01

    It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

  17. Clinical quality standards for radiotherapy

    2012-01-01

    Aim of the study The technological progress that is currently being witnessed in the areas of diagnostic imaging, treatment planning systems and therapeutic equipment has caused radiotherapy to become a high-tech and interdisciplinary domain involving staff of various backgrounds. This allows steady improvement in therapy results, but at the same time makes the diagnostic, imaging and therapeutic processes more complex and complicated, requiring every stage of those processes to be planned, organized, controlled and improved so as to assure high quality of services provided. The aim of this paper is to present clinical quality standards for radiotherapy as developed by the author. Material and methods In order to develop the quality standards, a comparative analysis was performed between European and Polish legal acts adopted in the period of 1980-2006 and the universal industrial ISO 9001:2008 standard, defining requirements for quality management systems, and relevant articles published in 1984-2009 were reviewed, including applicable guidelines and recommendations of American, international, European and Polish bodies, such as the American Association of Physicists in Medicine (AAPM), the European Society for Radiotherapy & Oncology (ESTRO), the International Atomic Energy Agency (IAEA), and the Organisation of European Cancer Institutes (OECI) on quality assurance and management in radiotherapy. Results As a result, 352 quality standards for radiotherapy were developed and categorized into the following three groups: 1 – organizational standards; 2 – physico-technical standards and 3 – clinical standards. Conclusion Proposed clinical quality standards for radiotherapy can be used by any institution using ionizing radiation for medical purposes. However, standards are of value only if they are implemented, reviewed, audited and improved, and if there is a clear mechanism in place to monitor and address failure to meet agreed standards. PMID:23788854

  18. Contrast of Korean industrial standard and overseas standard

    Kim, Jong Deuk

    2006-12-01

    This book introduces Korean Industrial Standard and Overseas Standard, which deals with furniture, plasticizers, valcaning agents, gaskets, steel pipes and tubes. It covers wooden furniture for offices, washing dresser, children crib, chairs and desks for students, chairs and desks made from synthetic resins, tricresyl phosphate, dibutyl phthalate, dioctyl phthalate, phtalic acid dieptil, V packing, vulcanization accelerator CBS(CZ), vulcanization accelerator MBT(M), vulcanization accelerator Zn BDC, steel pipe for heating furnace and carbon steel pope for high voltage piping.

  19. Welfare standards in hospital mergers.

    Katona, Katalin; Canoy, Marcel

    2013-08-01

    There is a broad literature on the consequences of applying different welfare standards in merger control. Total welfare is usually defined as the sum of consumer and provider surplus, i.e., potential external effects are not considered. The general result is then that consumer welfare is a more restrictive standard than total welfare, which is advantageous in certain situations. This relationship between the two standards is not necessarily true when the merger has significant external effects. We model mergers on hospital markets and allow for not-profit-maximizing behavior of providers and mandatory health insurance. Mandatory health insurance detaches the financial and consumption side of health care markets, and the concept consumer in merger control becomes non-evident. Patients not visiting the merging hospitals still are affected by price changes through their insurance premiums. External financial effects emerge on not directly affected consumers. We show that applying a restricted interpretation of consumer (neglecting externality) in health care merger control can reverse the relation between the two standards; consumer welfare standard can be weaker than total welfare. Consequently, applying the wrong standard can lead to both clearing socially undesirable and to blocking socially desirable mergers. The possible negative consequences of applying a simple consumer welfare standard in merger control can be even stronger when hospitals maximize quality and put less weight on financial considerations. We also investigate the implications of these results for the practice of merger control.

  20. The Elusive Standard of Care.

    Cooke, Brian K; Worsham, Elizabeth; Reisfield, Gary M

    2017-09-01

    In medical negligence cases, the forensic expert must explain to a trier of fact what a defendant physician should have done, or not done, in a specific set of circumstances and whether the physician's conduct constitutes a breach of duty. The parameters of the duty are delineated by the standard of care. Many facets of the standard of care have been well explored in the literature, but gaps remain in a complete understanding of this concept. We examine the standard of care, its origins, and who determines the prevailing standard, beginning with an overview of the historical roots of the standard of care and, using case law, tracing its evolution from the 19th century through the early 21st century. We then analyze the locality rule and consider local, state, and national standards of care. The locality rule requires a defendant physician to provide the same degree of skill and care that is required of a physician practicing in the same or similar community. This rule remains alive in some jurisdictions in the United States. Last, we address the relationship between the standard of care and clinical practice guidelines. © 2017 American Academy of Psychiatry and the Law.

  1. Telemetry Standards, RCC Standard 106-17, Chapter 4, Pulse Code Modulation Standards

    2017-07-01

    A-4 Appendix 4-B. Citations ...investigation can be found in a paper by J. L. Maury, Jr. and J. Styles , “Development of Optimum Frame Synchronization Codes for Goddard Space Flight Center...Standards, RCC Standard 106-17 Chapter 4, July 2017 B-1 APPENDIX 4-B Citations Aeronautical Radio, Inc. Mark 33 Digital Information Transfer

  2. State Standard-Setting Processes in Brief. State Academic Standards: Standard-Setting Processes

    Thomsen, Jennifer

    2014-01-01

    Concerns about academic standards, whether created by states from scratch or adopted by states under the Common Core State Standards (CCSS) banner, have drawn widespread media attention and are at the top of many state policymakers' priority lists. Recently, a number of legislatures have required additional steps, such as waiting periods for…

  3. Ecological research on offshore wind energy development in the North and Baltic sea. Part: Environmental planning instruments: Environmental Impacts Assessment (EIA), Habitats Assessment and Strategic Environmetnal Assessment (SEA). Volumes 1-4 and final report; Oekologische Begleitforschung zur Windenergienutzung im Offshore-Bereich der Nord- und Ostsee. Teilbereich 'Instrumente des Umwelt- und Naturschutzes: Strategische Umweltpruefung, Umweltvertraeglichkeitspruefung und Flora-Fauna-Habitat-Vertraeglichkeitspruefung'. Band 1-4 und Schlussbericht

    Koeppel, J.; Langenheld, A.; Peters, W.; Wende, W.; Sommer, S.; Finger, A.; Koeller, J.; Kraetzschmer, D.; Kerber, N.; Mahlburg, S.; Mueller, C.

    2003-07-01

    Within the licensing procedure of offshore wind farms several environmental planning instruments have to be taken into account to assess the probable effects of turbines on the marine environment. So far only little experiences were available on how to fulfil legal and methodical demands with regard to these environmental planning instruments offshore. Hence it was the principle task of this project to analyse how instruments like the environmental impacts assessment (EIA), the habitats assessment and the strategic environmental assessment (SEA) can be adapted to the special conditions of the marine environment and the legal requirements of the licensing procedure in the German EEZ according to the offshore installations ordinance. Since according to the offshore installations ordinance the construction and operation of offshore wind farms can only be refused for environmental reasons when the marine environment is endangered, the project first investigated for different aspects of the marine environment (e.g. marine mammals, birds, benthos, visual landscape) which kind of conflicts can possibly be caused by the construction and operation of turbines and of which legal significance they are with regard to the licensing procedure. Referring to those environmental impacts which have been considered as relevant for the licensing procedure the state of knowledge has been investigated by means of expert interviews and literature research. Practicable starting points for the impact assessment were suggested. With regard to the required environmental assessment within the licensing procedure one result of the project is a structured documentation of the standard of knowledge (volume I). Further on the project developed proposals for the application of the planning instruments EIA, habitats assessment and SEA offshore based on legal regulations. The result is a catalogue of requirements regarding the content and proceedings of the instruments implementation in connection

  4. Air Force standards for nickel hydrogen battery

    Hwang, Warren; Milden, Martin

    1994-01-01

    The topics discussed are presented in viewgraph form and include Air Force nickel hydrogen standardization goals, philosophy, project outline, cell level standardization, battery level standardization, and schedule.

  5. National Green Building Standard Analysis

    none,

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  6. Performance standard for dose Calibrator

    Darmawati, S

    2002-01-01

    Dose calibrator is an instrument used in hospitals to determine the activity of radionuclide for nuclear medicine purposes. International Electrotechnical Commission (IEC) has published IEC 1303:1994 standard that can be used as guidance to test the performance of the instrument. This paper briefly describes content of the document,as well as explains the assessment that had been carried out to test the instrument accuracy in Indonesia through intercomparison measurement.Its is suggested that hospitals acquire a medical physicist to perform the test for its dose calibrator. The need for performance standard in the form of Indonesia Standard is also touched.

  7. Repair mechanisms and exposure standards

    Mills, W.A.

    1978-01-01

    The following topics are discussed; public policy for setting radiation standards; use of linear, nonthreshold theory in setting radiation standards; dose-rate dependence; occupational exposure to radiation; radon inhalation from radium in the soil in the vicinity of the phosphate industry; relation of repair mechanisms for cell survival to cancer induction; application of information on genetic repair to humans and to cancer induction; importance of repair processes in radiation protection standards; corrective factors for repair processes; relation of repair processes to age, sex, and other factors; and population distribution in radiosensitivity

  8. Atlas C++ Coding Standard Specification

    Albrand, S; Barberis, D; Bosman, M; Jones, B; Stavrianakou, M; Arnault, C; Candlin, D; Candlin, R; Franck, E; Hansl-Kozanecka, Traudl; Malon, D; Qian, S; Quarrie, D; Schaffer, R D

    2001-01-01

    This document defines the ATLAS C++ coding standard, that should be adhered to when writing C++ code. It has been adapted from the original "PST Coding Standard" document (http://pst.cern.ch/HandBookWorkBook/Handbook/Programming/programming.html) CERN-UCO/1999/207. The "ATLAS standard" comprises modifications, further justification and examples for some of the rules in the original PST document. All changes were discussed in the ATLAS Offline Software Quality Control Group and feedback from the collaboration was taken into account in the "current" version.

  9. Pellets standard on the way

    Laeng, H.-P.

    2001-01-01

    This short article introduces the Swiss standard that has been adapted from the German standard for heating pellets made of untreated wood. The various requirements placed on the materials used in the manufacture of the pellets and their influence on the pollution emissions produced by boilers and ovens using the pellets as a heating fuel are listed. Further points in the standard referring to declarations to be made by the manufacturer, size and specific weight of the pellets and instructions for the storage and burning of the pellets are discussed

  10. Tests on standard concrete samples

    CERN PhotoLab

    1973-01-01

    Compression and tensile tests on standard concrete samples. The use of centrifugal force in tensile testing has been developed by the SB Division and the instruments were built in the Central workshops.

  11. Literacy Standards for Preschool Learners.

    Bodrova, Elena; Leong, Deborah J.; Paynter, Diane E.

    1999-01-01

    Preschool and kindergarten teachers can help young learners meet early literacy standards without sacrificing developmentally appropriate practice. Several professional associations have described appropriate expectations for children of different age levels known as milestones, developmental accomplishments, and benchmarks. (MLH)

  12. Vehicle track interaction safety standards

    2014-04-02

    Vehicle/Track Interaction (VTI) Safety Standards aim to : reduce the risk of derailments and other accidents attributable : to the dynamic interaction between moving vehicles and the : track over which they operate. On March 13, 2013, the Federal : R...

  13. Time and Standards - An Overview

    Guinot, Bernard

    2000-01-01

    ...? This paper attempts to answer this question. After recalling current performances of time and frequency standards and their use in establishing time scales, the author considers their limitations in astronomical observations and studies...

  14. ISO standardization in nuclear technology

    Brabec, D [Ustav pro Vyzkum, Vyrobu a Vyuziti Radioisotopu, Prague (Czechoslovakia); Cermak, O [Urad pro Normalizaci a Mereni, Prague (Czechoslovakia)

    1984-10-01

    The activity is described of the technical commission ISO/TC 85 which is currently divided into 4 subcommissions (SC) and 24 working groups. SC 1 ''Terminology, definitions, units, abbreviations'' has one working group. The most important document of this SC is ISO 921-1972 (Dictionary of nuclear technology). SC 2 ''Radiation protection'' has 9 working groups and has processed standards in dosimetry. SC 3 ''Technology of power reactors'' has 6 working groups and its work is related to IAEA activities within the NUSS program. SC 4 ''Technology of nuclear fuels'' has 8 working groups. SC 4 has compiled the basic standards for sealed sources and methods of testing their tightness. The results of the work of this group have been reflected into the standardization work of CMEA. A list is given of published international standards within TC 85.

  15. Standard exercise report format (SERF)

    Anon.

    1995-01-01

    This talk summarizes the reasons for the development of draft SERF the Standard Exercise Report Format used for reporting the results of emergency preparedness exercises, and gives a summary of the format and rational behind it

  16. Evidentiary standards for forensic anthropology.

    Christensen, Angi M; Crowder, Christian M

    2009-11-01

    As issues of professional standards and error rates continue to be addressed in the courts, forensic anthropologists should be proactive by developing and adhering to professional standards of best practice. There has been recent increased awareness and interest in critically assessing some of the techniques used by forensic anthropologists, but issues such as validation, error rates, and professional standards have seldom been addressed. Here we explore the legal impetus for this trend and identify areas where we can improve regarding these issues. We also discuss the recent formation of a Scientific Working Group for Forensic Anthropology (SWGANTH), which was created with the purposes of encouraging discourse among anthropologists and developing and disseminating consensus guidelines for the practice of forensic anthropology. We believe it is possible and advisable for anthropologists to seek and espouse research and methodological techniques that meet higher standards to ensure quality and consistency in our field.

  17. Imaging standards for smart cards

    Ellson, Richard N.; Ray, Lawrence A.

    1996-02-01

    "Smart cards" are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper will review imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper will conclude with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.

  18. Conservation Law Enforcement Program Standardization

    Rogers, Stan

    2004-01-01

    The ultimate goal of standardization is to develop a safe and effective program that is recognized within the USAF, DoD, and by other Federal and state law enforcement agencies, and the general public...

  19. INTERNATIONAL FINANCIAL REPORTING STANDARDS AND ...

    PUBLICATIONS1

    across borders led many economies to adopt the. International ... Keywords: Reporting Standards, Value, Relevance, Earnings, Management ..... nal of Applied Economics and Business Re- search ... accounting in emerging markets: Evidence.

  20. Equipment standards for interventional cardiology

    Dowling, A.; Gallagher, A.; Walsh, C.; Malone, J.

    2005-01-01

    Interventional radiology has seen rapid growth in cardiology and represents an alternative to hazardous surgery. Recently there has been a substantial growth in the number of procedures being performed and interventional cardiology (IC) procedures are the most common interventional procedures in Europe. Advances in imaging technology have facilitated the development of increasingly complex radiological IC equipment. Currently, the technology is developing at a rate ahead of supporting research, equipment standards and a regulatory framework. International standards play a key role in the design, manufacture and performance of radiological IC equipment. A survey of 12 IC systems (15 imaging chains) was conducted in Irish hospitals. The aim of the study was to assess the imbalance between rapidly advancing technology and existing standards and to propose recommendations for new IC equipment standards. The results demonstrate the need for definitive equipment requirements and standardisation in the design, manufacture, acceptance and maintenance of IC equipment. (authors)

  1. Global Standards of Market Civilization

    Global Standards of Market Civilization brings together leading scholars, representing a range of political views, to investigate how global 'standards of market civilization' have emerged, their justification, and their political, economic and social impact. Key chapters show how as the modern...... thought, as well as its historical application part II presents original case studies that demonstrate the emergence of such standards and explore the diffusion of liberal capitalist ideas through the global political economy and the consequences for development and governance; the International Monetary...... Fund's capacity to formulate a global standard of civilization in its reform programs; and problems in the development of the global trade, including the issue of intellectual property rights. This book will be of strong interest to students and scholars in wide range of fields relating to the study...

  2. Radiation control standards and procedures

    1956-12-14

    This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

  3. Argentine nuclear energy standardization activities

    Boero, Norma; Corcuera, Roberto; Palacios, Tulio A.; Hey, Alfredo M.; Berte, G.; Trama, L.

    2004-01-01

    The International Organization for Standardization (ISO) has more than 200 Technical Committees that develop technical standards. During April 2004 took place in Buenos Aires the 14th Plenary of the ISO/TC 85 Nuclear Energy Committee. During this Plenary issues as Nuclear Terminology, Radiation Protection, Nuclear Fuels, Nuclear Reactors and Irradiation Dosimetry was dealt with. 105 International delegates and 45 National delegates (belonging to CNEA, ARN, NASA, INVAP, CONUAR, IONICS and other organizations) attended the meetings. During this meeting ISO/TC 85 changed its scope; the new scope of the Committee is 'Standardization in the fields of peaceful applications of nuclear energy and of the protection of individuals against all sources of ionizing radiations'. This work summarizes the most important advances and resolutions about the development of standards taken during this meeting as well as the main conclusions. (author) [es

  4. Digital forensic standards: international progress

    Grobler, MM

    2010-05-01

    Full Text Available With the explosion of digital crime, digital forensics is more often applied. The digital forensic discipline developed rather rapidly, but up to date very little international standardization with regard to processes, procedures or management has...

  5. Standardization or Stigmatization? Challenges Confronting ...

    rbr

    lects, the separation of the standard language from its own dialects and the .... from areas such as Mapulaneng, Bolobedu and Bot√okwa sent their children to ..... gave this assignment to the Sesotho sa Leboa National Language Body. This.

  6. Rethinking wood dust safety standards

    Ratnasingam, Jega; Wai, Lim Tau; Ramasamy, Geetha; Ioras, Florin; Tadin, Ishak; Universiti Putra Malaysia; Buckinghamshire New University; Centre for Occupational Safety and Health Singapore

    2015-01-01

    The current universal work safety and health standards pertaining to wood dust in factories lack the localisation required. As a study has shown, there is a urgent need to reevaluate the current guidelines and practices.

  7. Dosimetry standards for radiation processing

    Farrar, H. IV

    1999-01-01

    For irradiation treatments to be reproducible in the laboratory and then in the commercial environment, and for products to have certified absorbed doses, standardized dosimetry techniques are needed. This need is being satisfied by standards being developed by experts from around the world under the auspices of Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). In the time period since it was formed in 1984, the subcommittee has grown to 150 members from 43 countries, representing a broad cross-section of industry, government and university interests. With cooperation from other international organizations, it has taken the combined part-time effort of all these people more than 13 years to complete 24 dosimetry standards. Four are specifically for food irradiation or agricultural applications, but the majority apply to all forms of gamma, x-ray, Bremsstrahlung and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruits, vegetables, meats, spices, processed foods, plastics, inks, medical wastes and paper. An additional 6 standards are under development. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties. Together, this set of standards covers essentially all aspects of dosimetry for radiation processing. The first 20 of these standards have been adopted in their present form by the International Organization of Standardization (ISO), and will be published by ISO in 1999. (author)

  8. Civil Engineering & Design Standards Manual

    Vänttinen, Eetu

    2014-01-01

    Civil Discipline Engineering department in Foster Wheeler Energia Oy takes care of the construction of foundation, steel frame, platforms, cladding/roofing, HVAC, elevator, hoist and central vacuum system of the boiler building. The goal of the thesis was to compile a design manual for the department to ease up the startup of the design of a new project and standardize the design. Main objective was to gather together all the existing guidelines, standards and directives regarding the des...

  9. Control system architecture: The standard and non-standard models

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

  10. Projected Standard on neutron skyshine

    Westfall, R.M.; Williams, D.S.

    1987-07-01

    Current interest in neutron skyshine arises from the application of dry fuel handling and storage techniques at reactor sites, at the proposed monitored retrievable storage facility and at other facilities being considered as part of the civilian radioactive waste management programs. The chairman of Standards Subcommittee ANS-6, Radiation Protection and Shielding, has requested that a work group be formed to characterize the neutron skyshine problem and, if necessary, prepare a draft Standard. The work group is comprised of representatives of storage cask vendors, architect engineering firms, nuclear utilities, the academic community and staff members of national laboratories and government agencies. The purpose of this presentation summary is to describe the activities of the work group and the scope and contents of the projected Standard, ANS-6.6.2, ''Calculation and Measurement of Direct and Scattered Neutron Radiation from Nuclear Power Operations.'' The specific source under consideration by the work group is an array of dry fuel casks located at a reactor site. However, it is recognized that the scope of the standard should be broad enough to encompass other neutron sources. The Standard will define appropriate methodology for properly characterizing the neutron dose due to skyshine. This dose characterization is necessary, for example, in demonstrating compliance with pertinent regulatory criteria

  11. Fluorescent standards for photodynamic therapy

    Belko, N.; Kavalenka, S.; Samtsov, M.

    2016-08-01

    Photodynamic therapy is an evolving technique for treatment of various oncological diseases. This method employs photosensitizers - species that lead to death of tumor cells after the photoactivation. For further development and novel applications of photodynamic therapy new photosensitizers are required. After synthesis of a new photosensitizer it is important to know its concentration in different biological tissues after its administration and distribution. The concentration is frequently measured by the extraction method, which has some disadvantages, e.g. it requires many biological test subjects that are euthanized during the measurement. We propose to measure the photosensitizer concentration in tissue by its fluorescence. For this purpose fluorescent standards were developed. The standards are robust and simple to produce; their fluorescence signal does not change with time. The fluorescence intensity of fluorescent standards seems to depend linearly on the dye concentration. A set of standards thus allow the calibration of a spectrometer. Finally, the photosensitizer concentration can be determined by the fluorescence intensity after comparing the corresponding spectrum with spectra of the set of fluorescent standards. A biological test subject is not euthanized during this kind of experiment. We hope this more humane technique can be used in future instead of the extraction method.

  12. Standards in neurosonology. Part I

    Joanna Wojcza

    2015-09-01

    Full Text Available The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specifi c brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler. Part II and III are devoted to standards for specifi c clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-toleft shunts, confi rmation of the arrest of the cerebral circulation, an assessment of the functional effi ciency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity.

  13. Standards in neurosonology. Part III

    Joanna Wojczal

    2016-06-01

    Full Text Available The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler. Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity.

  14. Nuclear Data Verification and Standardization

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  15. Next Generation Science Standards: All Standards, All Students

    Lee, Okhee; Miller, Emily C.; Januszyk, Rita

    2014-01-01

    The Next Generation Science Standards (NGSS) offer a vision of science teaching and learning that presents both learning opportunities and demands for all students, particularly student groups that have traditionally been underserved in science classrooms. The NGSS have addressed issues of diversity and equity from their inception, and the NGSS…

  16. Beyond the standard model; Au-dela du modele standard

    Cuypers, F. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-05-01

    These lecture notes are intended as a pedagogical introduction to several popular extensions of the standard model of strong and electroweak interactions. The topics include the Higgs sector, the left-right symmetric model, grand unification and supersymmetry. Phenomenological consequences and search procedures are emphasized. (author) figs., tabs., 18 refs.

  17. Standard Black English: Upheld by What Standard of Tolerance?

    Denson, Marquita D.

    1995-01-01

    Explains how teachers might go about equitably and fairly teaching standard written English when African American students in the class speak black English. Argues that black English, which has been 400 years in the making, is worthy of tolerance and respect for all its richness. (TB)

  18. 76 FR 75840 - Revising Standards Referenced in the Acetylene Standard

    2011-12-05

    ... Flexibility Act Certification C. OMB Review Under the Paperwork Reduction Act of 1995 D. Federalism E. State... meaning of Section 652(8) when a significant risk of material harm exists in the workplace and the standard would substantially reduce or eliminate that workplace risk. This NPRM would not reduce the...

  19. 76 FR 75782 - Revising Standards Referenced in the Acetylene Standard

    2011-12-05

    ... Determinations A. Legal Considerations B. Final Economic Analysis and Regulatory Flexibility Act Certification C... within the meaning of Section 652(8) when a significant risk of material harm exists in the workplace and the standard would substantially reduce or eliminate that workplace risk. This DFR will not reduce the...

  20. Control system architecture: The standard and non-standard models

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

  1. ICT Competency Standards for Teachers: Competency Standards Modules

    United Nations Educational, Scientific and Cultural Organization (UNESCO), 2008

    2008-01-01

    Both professional development programs for teachers currently in the classroom and programs for preparing future teachers should provide technology-rich experiences throughout all aspects of the training. Standards and resources within the United Nations Educational, Scientific, and Cultural Organization (UNESCO)'s project "Information and…

  2. 40 CFR 403.6 - National pretreatment standards: Categorical standards.

    2010-07-01

    ... falls within that particular subcategory. If an existing Industrial User adds or changes a process or... best of my knowledge and belief, true, accurate, and complete. I am aware that there are significant... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GENERAL PRE-TREAT-MENT REGULATIONS FOR EXIST-ING AND NEW...

  3. Calibration of working standard ionization chambers and dose standardization

    Abd Elmahoud, A. A. B.

    2011-01-01

    Measurements were performed for the calibration of two working standard ionization chambers in the secondary standard dosimetry laboratory of Sudan. 600 cc cylindrical former type and 1800 cc cylindrical radical radiation protection level ionization chambers were calibrated against 1000 cc spherical reference standard ionization chamber. The chamber were calibrated at X-ray narrow spectrum series with beam energies ranged from (33-116 KeV) in addition to 1''3''7''Cs beam with 662 KeV energy. The chambers 0.6 cc and 0.3 cc therapy level ionization were used for dose standardization and beam output calibrations of cobalt-60 radiotherapy machine located at the National Cancer Institute, University of Gazira. Concerning beam output measurements for 6''0''Co radiotherapy machine, dosimetric measurements were performed in accordance with the relevant per IAEA dosimetry protocols TRS-277 and TRS-398. The kinetic energy released per unit mass in air (air kerma) were obtained by multiplying the corrected electrometer reading (nC/min) by the calibration factors (Gy/n C) of the chambers from given in the calibration certificate. The uncertainty of measurements of air kerma were calculated for the all ionization chambers (combined uncertainty) the calibration factors of these ionization chambers then were calculated by comparing the reading of air kerma of secondary standard ionization chambers to than from radical and farmer chambers. The result of calibration working standard ionization chambers showed different calibration factors ranged from 0.99 to 1.52 for different radiation energies and these differences were due to chambers response and specification. The absorbed dose to to water calculated for therapy ionization chamber using two code of practice TRS-277 and TRS-398 as beam output for 6''0''Co radiotherapy machine and it can be used as a reference for future beam output calibration in radiotherapy dosimetry. The measurement of absorbed dose to water showed that the

  4. Standardization efforts in IP telephony

    Sengodan, Senthil; Bansal, Raj

    1999-11-01

    The recent interest in IP telephony has led to a tremendous increase of standardization activities in the area. The three main standards bodies in the area of IP telephony are the International Telecommunication Union's (ITU-T) Study Group (SG) 16, the Internet Engineering Task Force (IETF) and the European Telecommunication Standards Institute's (ETSI) TIPHON project. In addition, forums such as the International Multimedia Teleconferencing Consortium (IMTC), the Intelligent Network Forum (INF), the International Softswitch Consortium (ISC), the Electronic Computer Telephony Forum (ECTF), and the MIT's Internet Telephony Consortium (ITC) are looking into various other aspects that aim at the growth of this industry. This paper describes the main tasks (completed and in progress) undertaken by these organizations. In describing such work, an overview of the underlying technology is also provided.

  5. Can Environmental Law be standardized

    Sendler, H.

    1981-01-01

    The author makes basic considerations on standardizability both in Constitutional Law and in simple Legislative Law. He discusses in detail a key issue of Environmental Law, namely the standardization of the right of third parties affected to file suit. In painstaking detail work one has to differentiate between standards having and not having an effect which protects third parties, and how far the protection of third parties goes. The limits to standardizability are reached with the use of undetermined legal terms. The shortcomings of standardizability for the legislator could and should be made up for by the statutory power which has to reify standards in a way which could guarantee efficient execution. (HSCH) [de

  6. Yoruba Writing: Standards and Trends

    Tèmítọ́pẹ́ Olúmúyìwá Ph.D.

    2013-06-01

    Full Text Available This paper presents the state of Yorùbá orthography. The first effort at standardizing Yorùbá writing system came in 1875, and there has been a great deal of refinements and orthographies since. Specifically, a great rush of activity in standardizing written Yorùbá came in the years after independence when effort to introduce the teaching of Nigerian languages in schools and the application of those languages to official activities. The present standards were established in 1974, however, there remains a great deal of contention over writing conventions-spelling, grammar, the use of tone marks. The paper explores examples from journalism, religious writing, education and literature, and advertising to demonstrate ongoing deviations from the approved orthography.

  7. on International Financial Reporting Standards

    Edyta Łazarowicz

    2016-07-01

    Full Text Available The article analyses and assesses proposals for changes concerning the objective of financial reportingbased on International Financial Reporting Standards (IFRS, presented in comments on the exposuredraft of the Conceptual Framework for Financial Reporting (2015. The majority of respondents thinkthat the objective of financial reporting should give more prominence to the importance of providinginformation about management’s stewardship. Moreover, some respondents suggest introducing thedefinition of stewardship into the Conceptual Framework and presenting implications of shifts in theobjective of financial reporting for the future standard setting and for preparing financial statements.Based on the analysis of comment letters and the review of accounting literature, the conclusion is thatthe objective of financial reporting should be changed. It is, however, disputable, if stewardship should bea separate object. There is too little research on the relation between the stewardship and decisionusefulnessobjectives. The findings of this research could show accounting standard-setters the potentialtrade-offs and conflicts between these objectives.

  8. Standardization of radioactive waste categories

    1970-01-01

    A large amount of information about most aspects of radioactive waste management has been accumulated and made available to interested nations in recent years. The efficiency of this service has been somewhat hampered because the terminology used to describe the different types of radioactive waste has varied from country to country and indeed from installation to installation within a given country. This publication is the outcome of a panel meeting on Standardization of Radioactive Waste Categories. It presents a simple standard to be used as a common language between people working in the field of waste management at nuclear installations. The purpose of the standard is only to act as a practical tool for increasing efficiency in communicating, collecting and assessing technical and economical information in the common interest of all nations and the developing countries in particular. 20 refs, 1 fig., 3 tabs

  9. Standards for dielectric elastomer transducers

    Carpi, Federico; Frediani, Gabriele; Anderson, Iain; Bauer, Siegfried; Gallone, Giuseppe; Gei, Massimiliano; Graaf, Christian; Jean-Mistral, Claire; Kaal, William; Kofod, Guggi; Kollosche, Matthias; Kornbluh, Roy; Pelrine, Ron; Lassen, Benny; Rechenbach, Björn; Matysek, Marc; Michel, Silvain; Nowak, Stephan; O’Brien, Benjamin; Pei, Qibing

    2015-01-01

    Dielectric elastomer transducers consist of thin electrically insulating elastomeric membranes coated on both sides with compliant electrodes. They are a promising electromechanically active polymer technology that may be used for actuators, strain sensors, and electrical generators that harvest mechanical energy. The rapid development of this field calls for the first standards, collecting guidelines on how to assess and compare the performance of materials and devices. This paper addresses this need, presenting standardized methods for material characterisation, device testing and performance measurement. These proposed standards are intended to have a general scope and a broad applicability to different material types and device configurations. Nevertheless, they also intentionally exclude some aspects where knowledge and/or consensus in the literature were deemed to be insufficient. This is a sign of a young and vital field, whose research development is expected to benefit from this effort towards standardisation. (paper)

  10. Standards for dielectric elastomer transducers

    Carpi, Federico; Anderson, Iain; Bauer, Siegfried; Frediani, Gabriele; Gallone, Giuseppe; Gei, Massimiliano; Graaf, Christian; Jean-Mistral, Claire; Kaal, William; Kofod, Guggi; Kollosche, Matthias; Kornbluh, Roy; Lassen, Benny; Matysek, Marc; Michel, Silvain; Nowak, Stephan; O'Brien, Benjamin; Pei, Qibing; Pelrine, Ron; Rechenbach, Björn; Rosset, Samuel; Shea, Herbert

    2015-10-01

    Dielectric elastomer transducers consist of thin electrically insulating elastomeric membranes coated on both sides with compliant electrodes. They are a promising electromechanically active polymer technology that may be used for actuators, strain sensors, and electrical generators that harvest mechanical energy. The rapid development of this field calls for the first standards, collecting guidelines on how to assess and compare the performance of materials and devices. This paper addresses this need, presenting standardized methods for material characterisation, device testing and performance measurement. These proposed standards are intended to have a general scope and a broad applicability to different material types and device configurations. Nevertheless, they also intentionally exclude some aspects where knowledge and/or consensus in the literature were deemed to be insufficient. This is a sign of a young and vital field, whose research development is expected to benefit from this effort towards standardisation.

  11. Dynamics of the standard model

    Donoghue, John F; Holstein, Barry R

    2014-01-01

    Describing the fundamental theory of particle physics and its applications, this book provides a detailed account of the Standard Model, focusing on techniques that can produce information about real observed phenomena. The book begins with a pedagogic account of the Standard Model, introducing essential techniques such as effective field theory and path integral methods. It then focuses on the use of the Standard Model in the calculation of physical properties of particles. Rigorous methods are emphasized, but other useful models are also described. This second edition has been updated to include recent theoretical and experimental advances, such as the discovery of the Higgs boson. A new chapter is devoted to the theoretical and experimental understanding of neutrinos, and major advances in CP violation and electroweak physics have been given a modern treatment. This book is valuable to graduate students and researchers in particle physics, nuclear physics and related fields.

  12. Perspectives in the standard model

    Ellis, R.K.; Hill, C.T.; Lykken, J.D.

    1992-01-01

    Particle physics is an experimentally based science, with a need for the best theorists to make contact with data and to enlarge and enhance their theoretical descriptions as the subject evolves. The authors felt it imperative that the TASI (Theoretical Advanced Study Institute) program reflect this need. The goal of this conference, was to provide the students with a comprehensive look at the current understanding of the standard model, as well as the techniques which promise to advance that understanding in the future. Topics covered include: symmetry breaking in the standard model; physics beyond the standard model; chiral effective Lagrangians; semi-classical string theory; renormalization of electroweak gauge interactions; electroweak experiments at LEP; the CKM matrix and CP violation; axion searches; lattice QCD; perturbative QCD; heavy quark effective field theory; heavy flavor physics on the lattice; and neutrinos. Separate abstracts were prepared for 13 papers in this conference

  13. The standard model and beyond

    Langacker, Paul

    2017-01-01

    This new edition of The Standard Model and Beyond presents an advanced introduction to the physics and formalism of the standard model and other non-abelian gauge theories. It provides a solid background for understanding supersymmetry, string theory, extra dimensions, dynamical symmetry breaking, and cosmology. In addition to updating all of the experimental and phenomenological results from the first edition, it contains a new chapter on collider physics; expanded discussions of Higgs, neutrino, and dark matter physics; and many new problems. The book first reviews calculational techniques in field theory and the status of quantum electrodynamics. It then focuses on global and local symmetries and the construction of non-abelian gauge theories. The structure and tests of quantum chromodynamics, collider physics, the electroweak interactions and theory, and the physics of neutrino mass and mixing are thoroughly explored. The final chapter discusses the motivations for extending the standard model and examin...

  14. Institutional model for supporting standardization

    Sanford, M.O.; Jackson, K.J.

    1993-01-01

    Restoring the nuclear option for utilities requires standardized designs. This premise is widely accepted by all parties involved in ALWR development activities. Achieving and maintaining standardization, however, demands new perspectives on the roles and responsibilities for the various commercial organizations involved in nuclear power. Some efforts are needed to define a workable model for a long-term support structure that will allow the benefits of standardization to be realized. The Nuclear Power Oversight Committee (NPOC) has developed a strategic plan that lays out the steps necessary to enable the nuclear industry to be in a position to order a new nuclear power plant by the mid 1990's. One of the key elements of the plan is the, ''industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation, and maintenance of nuclear power plants.'' This commitment is a result of the recognition by utilities of the substantial advantages to standardization. Among these are economic benefits, licensing benefits from being treated as one of a family, sharing risks across a broader ownership group, sharing operating experiences, enhancing public safety, and a more coherent market force. Utilities controlled the construction of the past generation of nuclear units in a largely autonomous fashion procuring equipment and designs from a vendor, engineering services from an architect/engineer, and construction from a construction management firm. This, in addition to forcing the utility to assume virtually all of the risks associated with the project, typically resulted in highly customized designs based on preferences of the individual utility. However, the benefits of standardization can be realized only through cooperative choices and decision making by the utilities and through working as partners with reactor vendors, architect/engineers, and construction firms

  15. Productivity standards for histology laboratories.

    Buesa, René J

    2010-04-01

    The information from 221 US histology laboratories (histolabs) and 104 from 24 other countries with workloads from 600 to 116 000 cases per year was used to calculate productivity standards for 23 technical and 27 nontechnical tasks and for 4 types of work flow indicators. The sample includes 254 human, 40 forensic, and 31 veterinary pathology services. Statistical analyses demonstrate that most productivity standards are not different between services or worldwide. The total workload for the US human pathology histolabs averaged 26 061 cases per year, with 54% between 10 000 and less than 30 000. The total workload for 70% of the histolabs from other countries was less than 20 000, with an average of 15 226 cases per year. The fundamental manual technical tasks in the histolab and their productivity standards are as follows: grossing (14 cases per hour), cassetting (54 cassettes per hour), embedding (50 blocks per hour), and cutting (24 blocks per hour). All the other tasks, each with their own productivity standards, can be completed by auxiliary staff or using automatic instruments. Depending on the level of automation of the histolab, all the tasks derived from a workload of 25 cases will require 15.8 to 17.7 hours of work completed by 2.4 to 2.7 employees with 18% of their working time not directly dedicated to the production of diagnostic slides. This article explains how to extrapolate this productivity calculation for any workload and different levels of automation. The overall performance standard for all the tasks, including 8 hours for automated tissue processing, is 3.2 to 3.5 blocks per hour; and its best indicator is the value of the gross work flow productivity that is essentially dependent on how the work is organized. This article also includes productivity standards for forensic and veterinary histolabs, but the staffing benchmarks for histolabs will be the subject of a separate article. Copyright 2010 Elsevier Inc. All rights reserved.

  16. Energy efficiency standards and innovation

    Morrison, Geoff

    2015-01-01

    Van Buskirk et al (2014 Environ. Res. Lett. 9 114010) demonstrate that the purchase price, lifecycle cost and price of improving efficiency (i.e. the incremental price of efficiency gain) decline at an accelerated rate following the adoption of the first energy efficiency standards for five consumer products. The authors show these trends using an experience curve framework (i.e. price/cost versus cumulative production). While the paper does not draw a causal link between standards and declining prices, they provide suggestive evidence using markets in the US and Europe. Below, I discuss the potential implications of the work.

  17. The standard model and colliders

    Hinchliffe, I.

    1987-03-01

    Some topics in the standard model of strong and electroweak interactions are discussed, as well as how these topics are relevant for the high energy colliders which will become operational in the next few years. The radiative corrections in the Glashow-Weinberg-Salam model are discussed, stressing how these corrections may be measured at LEP and the SLC. CP violation is discussed briefly, followed by a discussion of the Higgs boson and the searches which are relevant to hadron colliders are then discussed. Some of the problems which the standard model does not solve are discussed, and the energy ranges accessible to the new colliders are indicated

  18. Setting standards of restorative justice

    Kostić Miomira

    2007-01-01

    Full Text Available In the article the author deals with the basic theoretical statements and discussions about the practical use of restorative justice. She discusses the questions of introducing and application of restorative justice in order to reach the balance of interests between a victim, society and a delinquent. There is no unique statement about the restorative justice concept, so the authors make this concept by listing certain activities with rispect of standards and principles. Also she emphasizes the values of restorative justice process. A part of the article is dedicated to the standards for restorative justice that are harmonized with the international documents of human rights. .

  19. Radiation safety standards and regulations

    Ermolina, E.P.; Ivanov, S.I.

    1993-01-01

    Radiation protection laws of Russia concerning medical application of ionizing radiation are considered. Main concepts of the documents and recommendations are presented. Attention was paid to the ALARA principle, safety standrds for paietients, personnel and population, radiation protection. Specific feature of the standardization of radiation factors is the establishment of two classes of norms: main dose limits and permissible levels. Maximum dose commitment is the main standard. Three groups of critical organs and three categories of the persons exposed to radiation are stated. Main requirements for radiation protection are shown

  20. Standardization and workers' protection legislation

    Kliesch, G.

    1979-01-01

    There are distinct laws guaranteeing the protection of workers in the social and medical field, but the protection of workers in the technical field is based on a simple, general clause relating to technical standards, i.e. to a confusing variety of regulations. The author therefore asks for DIN standards to be set up in order to achieve a consistent and uniform set of rules and regulations. He furthermore points out that it is up to the government to initiate appropriate procedures within the framework of constitutional law towards solving the essential problem, namely that of directly incorporating technical expert knowledge in legal provisions. (HSCH) [de

  1. Extensions of the Standard Model

    Zwirner, Fabio

    1996-01-01

    Rapporteur talk at the International Europhysics Conference on High Energy Physics, Brussels (Belgium), July 27-August 2, 1995. This talk begins with a brief general introduction to the extensions of the Standard Model, reviewing the ideology of effective field theories and its practical implications. The central part deals with candidate extensions near the Fermi scale, focusing on some phenomenological aspects of the Minimal Supersymmetric Standard Model. The final part discusses some possible low-energy implications of further extensions near the Planck scale, namely superstring theories.

  2. Future of Software Engineering Standards

    Poon, Peter T.

    1997-01-01

    In the new millennium, software engineering standards are expected to continue to influence the process of producing software-intensive systems which are cost-effetive and of high quality. These sytems may range from ground and flight systems used for planetary exploration to educational support systems used in schools as well as consumer-oriented systems.

  3. Standardization of UV LED measurements

    Eppeldauer, G. P.; Larason, T. C.; Yoon, H. W.

    2015-09-01

    Traditionally used source spectral-distribution or detector spectral-response based standards cannot be applied for accurate UV LED measurements. Since the CIE standardized rectangular-shape spectral response function for UV measurements cannot be realized with small spectral mismatch when using filtered detectors, the UV measurement errors can be several times ten percent or larger. The UV LEDs produce broadband radiation and both their peaks or spectral bandwidths can change significantly. The detectors used for the measurement of these LEDs also have different spectral bandwidths. In the discussed example, where LEDs with 365 nm peak are applied for fluorescent crack-recognition using liquid penetrant (non-destructive) inspection, the broadband radiometric LED (signal) measurement procedure is standardized. A UV LED irradiance-source was calibrated against an FEL lamp standard to determine its spectral irradiance. The spectral irradiance responsivity of a reference UV meter was also calibrated. The output signal of the reference UV meter was calculated from the spectral irradiance of the UV source and the spectral irradiance responsivity of the reference UV meter. From the output signal, both the integrated irradiance (in the reference plane of the reference meter) and the integrated responsivity of the reference meter were determined. Test UV meters calibrated for integrated responsivity against the reference UV meter, can be used to determine the integrated irradiance from a field UV source. The obtained 5 % (k=2) measurement uncertainty can be decreased when meters with spectral response close to a constant value are selected.

  4. EASIER ACCESS TO STANDARDS DOCUMENTATION

    2001-01-01

    Many organizations issuing standards offer reduced prices for publications to their members. Paying a membership fee, even a site membership fee, can therefore be worthwhile - even if relatively few standards are needed. The Library is now exploring the possibility, in collaboration with the rest of the CERN community, of joining standards-issuing organizations. So why not share your costs with the rest of the organization wherever this can be done without violating copyright or access regulations? The Library now provides documentation and other member services from IPC, the Association Connecting Electronics Industries (http://www.ipc.org/html/fsabout.htm) at favourable prices for the entire CERN population. For more information, or if you are a member of any other organization which provides services which could be shared CERN-wide, please contact library.desk@cern.ch . We remind all users of international standards, that CERN has special agreements with ISO and IEC (see Bulletin 50/2000). You can order st...

  5. The Next Generation Science Standards

    Pruitt, Stephen L.

    2015-01-01

    The Next Generation Science Standards (NGSS Lead States 2013) were released almost two years ago. Work tied to the NGSS, their adoption, and implementation continues to move forward around the country. Stephen L. Pruitt, senior vice president, science, at Achieve, an independent, nonpartisan, nonprofit education reform organization that was a lead…

  6. [Transsexuality--standards of care].

    Eicher, W

    1995-01-01

    After the description of transsexualism as a nosological entity by Harry Benjamin standards of care emerged which are useful and protective for patients and doctors involved in treatment. The diagnosis is established by the finding of an irreversibly transposed gender identity. This has to be confirmed by an expert who is competent in counselling gender identity problems. He will give his written opinion which is the indication for the hormonal treatment to be done at least for half a year prior to operation and which leads to virilization or effeminization and which is the preparation for genital surgery. Standards of female-to-male surgery are: 1. Breast-transformation 2. Colpohysterectomy with adnexectomy, possibly by the vaginal route. Surrogates for testes and phalloplasties are only in the experimental stage and not standard. Standards of male-to-female surgery are: 1. Castration by extirpation of testes. 2. Resection of penis shaft with total resection of the spongy bodies. 3. Neovagina by inverted penis-skin technique. 4. Plasty of labia majora and minora and a clitoris. 5. In case of insufficient gynecomastia breast-augmentation. After the operation, follow-up examinations are necessary by the surgeon until complete healing. A supportive psychological care by the expert who has evaluated the transposition of gender identity would be useful. It could be done also by the gynecologist who makes the follow-up examinations in male to female transsexuals. He is also competent for the life-long hormonal substitution.

  7. ISO standardization in nuclear technology

    Brabec, D. (Ustav pro Vyzkum, Vyrobu a Vyuziti Radioisotopu, Prague (Czechoslovakia)); Cermak, O. (Urad pro Normalizaci a Mereni, Prague (Czechoslovakia))

    1984-10-01

    The activity is described of the technical commission ISO/TC 85 which is currently divided into 4 subcommissions (SC) and 24 working groups. SC 1 ''Terminology, definitions, units, abbreviations'' has one working group. The most important document of this SC is ISO 921-1972 (Dictionary of nuclear technology). SC 2 ''Radiation protection'' has 9 working groups and has processed standards in dosimetry. SC 3 ''Technology of power reactors'' has 6 working groups and its work is related to IAEA activities within the NUSS program. SC 4 ''Technology of nuclear fuels'' has 8 working groups. SC 4 has compiled the basic standards for sealed sources and methods of testing their tightness. The results of the work of this group have been reflected into the standardization work of CMEA. A list is given of published international standards within TC 85.

  8. Raising standards in clinical research

    Ohmann, C.; Canham, S.; Demotes, J.

    2017-01-01

    The nature and the purpose of the ECRIN Data Centre Certification Programme are summarised, and a very brief description is given of the underlying standards (129 in total, divided into 19 separate lists). The certification activity performed so far is described. In a pilot phase 2 centres were c...

  9. Visualizing the Sample Standard Deviation

    Sarkar, Jyotirmoy; Rashid, Mamunur

    2017-01-01

    The standard deviation (SD) of a random sample is defined as the square-root of the sample variance, which is the "mean" squared deviation of the sample observations from the sample mean. Here, we interpret the sample SD as the square-root of twice the mean square of all pairwise half deviations between any two sample observations. This…

  10. Standard Deviation for Small Samples

    Joarder, Anwar H.; Latif, Raja M.

    2006-01-01

    Neater representations for variance are given for small sample sizes, especially for 3 and 4. With these representations, variance can be calculated without a calculator if sample sizes are small and observations are integers, and an upper bound for the standard deviation is immediate. Accessible proofs of lower and upper bounds are presented for…

  11. Phenomenology beyond the standard model

    Lykken, Joseph D.; /Fermilab

    2005-03-01

    An elementary review of models and phenomenology for physics beyond the Standard Model (excluding supersymmetry). The emphasis is on LHC physics. Based upon a talk given at the ''Physics at LHC'' conference, Vienna, 13-17 July 2004.

  12. The standard model and beyond

    Marciano, W.J.

    1989-05-01

    In these lectures, my aim is to present a status report on the standard model and some key tests of electroweak unification. Within that context, I also discuss how and where hints of new physics may emerge. To accomplish those goals, I have organized my presentation as follows. I survey the standard model parameters with particular emphasis on the gauge coupling constants and vector boson masses. Examples of new physics appendages are also commented on. In addition, I have included an appendix on dimensional regularization and a simple example which employs that technique. I focus on weak charged current phenomenology. Precision tests of the standard model are described and up-to-date values for the Cabibbo-Kobayashi-Maskawa (CKM) mixing matrix parameters are presented. Constraints implied by those tests for a 4th generation, extra Z' bosons, and compositeness are discussed. An overview of the physics of tau decays is also included. I discuss weak neutral current phenomenology and the extraction of sin 2 θW from experiment. The results presented there are based on a global analysis of all existing data. I have chosen to concentrate that discussion on radiative corrections, the effect of a heavy top quark mass, implications for grand unified theories (GUTS), extra Z' gauge bosons, and atomic parity violation. The potential for further experimental progress is also commented on. Finally, I depart from the narrowest version of the standard model and discuss effects of neutrino masses, mixings, and electromagnetic moments. 32 refs., 3 figs., 5 tabs

  13. ACCOUNTABILITY WITHIN NEW OZONE STANDARDS

    Over the past two decades, as part of the effort to develop the National Ambient Air Quality Standards (NAAQS), researchers have been using real human exposure data to help analyze the magnitude and extent of the risks from specific or multiple pollutants. Surrogates for exposur...

  14. Standardization or Stigmatization? Challenges Confronting ...

    Abstract: The article investigates the effects of the underutilization of the abundant vocabulary of Sesotho sa Leboa, which results from a one-sided standardization approach owing to the disregard and stigmatization of most dialects. Sesotho sa Leboa has several dialects differing greatly concerning terminology ...

  15. Residential ventilation standards scoping study

    McKone, Thomas E.; Sherman, Max H.

    2003-10-01

    The goals of this scoping study are to identify research needed to develop improved ventilation standards for California's Title 24 Building Energy Efficiency Standards. The 2008 Title 24 Standards are the primary target for the outcome of this research, but this scoping study is not limited to that timeframe. We prepared this scoping study to provide the California Energy Commission with broad and flexible options for developing a research plan to advance the standards. This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the ventilation needs of California residences, determining the bases for setting residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and corresponding levels of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  16. Guidelines for human settlements standards

    Vejledningen er en kortfattet gennemgang af alle de sociale, politiske, økonomiske, administrative og tekniske spørgsmål, der må afklares i de indledende faser af arbejdet med at opstille standards for boliger og for infrastruktur i byudviklingsområder i udviklingslande. Vejledningen er på engels...

  17. Standardized Curriculum for Automotive Mechanics.

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: automotive mechanics I and II. The six units in automotive mechanics I are as follows: orientation and safety; tools, equipment, and manuals; measurement; automotive engines; basic electrical systems; and fuel systems. Automotive…

  18. Consensus standard requirements and guidance

    Putman, V.L.

    1995-01-01

    This report presents information from the ANS Criticality Alarm System Workshop relating to the consensus standard requirements and guidance. Topics presented include: definition; nomenclature; requirements and recommendations; purpose of criticality alarms; design criteria; signal characteristics; reliability, dependability and durability; tests; and emergency preparedness and planning

  19. Double standards with radioactive waste

    Parkinson, A.

    2002-01-01

    The author claims that whether it is short-lived waste from Commonwealth facilities, long-lived plutonium waste from an atomic bomb test site on Aboriginal land, or reactor waste from Lucas Heights, the Australian government applies double standards to suit its own agenda

  20. The Problem of National Standards.

    Brannon, Lil

    1995-01-01

    Argues that the development of national standards is another way in which the literacy crisis is being managed and maintained, a crisis arising from the tension between America's promise to the individual that he or she will have full access to intellectual resources and the needs of capitalism to have a differentiated, stratified workforce. (TB)

  1. INTERNATIONAL FINANCIAL REPORTING STANDARDS AND ...

    PUBLICATIONS1

    (IFRS) on the quality of financial reporting in Nigeria. The study utilises a ... cial reporting by public interest entities world- wide. In Nigeria ... Keywords: Reporting Standards, Value, Relevance, Earnings, Management ... of the. IFRS, the adoption is wrought with challenges. ... and transitional economies still have ineffective.

  2. Challenges to 5G standardization

    Mihovska, Albena D.; Prasad, Ramjee

    2013-01-01

    Interoperable, ubiquitous and dynamic are key objectives for fifth-generation (5G) communication systems and applications. These characteristics are also at the core of the main challenges that researchers, manufacturers, regulators and standardization bodies face when designing targeted strategies...... for the successful deployment of 5G enabling technologies....

  3. Good standards for smart meters

    Hoenkamp, R.A.; Huitema, G.B.

    2012-01-01

    This paper examines what lessons can be learned from the rollout of smart meters in the Netherlands to improve the European smart meter standardization. This study is based on the case of the Dutch meter rollout which preparations started in 2005 but finally was delayed until 2011 by governmental

  4. Age, colors and ISO standards

    Nes, van F.L.; Eschbach, R; Marcu, G.G.; Tominaga, S.; Rizzi, A.

    2010-01-01

    Age influences all bodily functions, also vision. Therefore, the effects of age on vision should be mirrored in ergonomic requirements laid down in display standards such as ISO 9241-300/307, 'Electronic visual display requirements'. However, this is only true to a limited extent - just as is the

  5. A Standard Fit for Neoliberalism

    Gibbon, Peter; Henriksen, Lasse Folke

    2012-01-01

    of activity to inspection (or self-inspection), audit, and certification. In the course of their investigations, the elements of a common narrative are emerging. This links standardization, audit, and certification with neoliberalism and contraction of the state, on one hand, with a reconfiguration...

  6. Scientific Reporting: Raising the Standards

    McLeroy, Kenneth R.; Garney, Whitney; Mayo-Wilson, Evan; Grant, Sean

    2016-01-01

    This article is based on a presentation that was made at the 2014 annual meeting of the editorial board of "Health Education & Behavior." The article addresses critical issues related to standards of scientific reporting in journals, including concerns about external and internal validity and reporting bias. It reviews current…

  7. Beyond the Standard Model course

    CERN. Geneva HR-RFA

    2006-01-01

    The necessity for new physics beyond the Standard Model will be motivated. Theoretical problems will be exposed and possible solutions will be described. The goal is to present the exciting new physics ideas that will be tested in the near future, at LHC and elsewhere. Supersymmetry, grand unification, extra dimensions and a glimpse of string theory will be presented.

  8. About the standard solar model

    Cahen, S.

    1986-07-01

    A discussion of the still controversial solar helium content is presented, based on a comparison of recent standard solar models. Our last model yields an helium mass fraction ∼0.276, 6.4 SNU on 37 Cl and 126 SNU on 71 Ga

  9. Teaching and Academic Standards Today.

    Handleman, Chester

    1980-01-01

    Reviews the decline of educational standards as reflected in national test scores and discusses four pedagogic causes for this decline: the abandonment of written tests in favor of objective, true/false testing techniques; nonpunitive grading and attendance policies; excessive use of technology in the classroom; and academic grade inflation. (JP)

  10. Impact assessment of commodity standards

    Ruben, Ruerd

    2017-01-01

    Voluntary commodity standards are widely used to enhance the performance of tropical agro-food chains and to support the welfare and sustainability of smallholder farmers. Different methods and approaches are used to assess the effectiveness and impact of these certification schemes at

  11. The status of 'standard' SUSY

    Zwirner, F

    1992-01-01

    We summarize the present status of low-energy supersymmetry, exemplified by the Minimal Supersymmetric extension of the Standard Model (MSSM). We review the searches for Supersymmetric particles and supersymmetric Higgs bosons. We conclude with some comments on the open theoretical problems related to spontaneous supersymmetry breaking in the underlying fundamental theory.

  12. Item Banking with Embedded Standards

    MacCann, Robert G.; Stanley, Gordon

    2009-01-01

    An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

  13. Efficiency Standard in automotive industry

    Goldoni, G.

    2008-01-01

    A technological transition in the transport sector could be only be possible with a convergence of objectives of the automotive and the fuel industries, which is not very simple to obtain. Fuel economy standards could differently reduce the growing trend of CO 2 emissions in this sector but regulators should avoid capture from domestic industry. [it

  14. Quality and standards in electronics

    Tricker, Ray

    1997-01-01

    A manufacturer or supplier of electronic equipment or components needs to know the precise requirements for component certification and quality conformance to meet the demands of the customer. This book ensures that the professional is aware of all the UK, European and International necessities, knows the current status of these regulations and standards, and where to obtain them.

  15. Sizing up State Standards, 2008

    American Federation of Teachers (NJ), 2008

    2008-01-01

    The members at the American Federation of Teachers examined each state's and Washington, D.C.'s content standards documents to determine whether or not they contain enough information about what students should learn to provide the basis for coherent curricula and assessments. There is no perfect formula for this; they made a series of judgment…

  16. The standard for portfolio management

    2017-01-01

    The Standard for Portfolio Management – Fourth Edition has been updated to best reflect the current state of portfolio management. It describe the principles that drive accepted good portfolio management practices in today’s organizations. It also expands the description of portfolio management to reflect its relation to organizational project management and the organization.

  17. Overview of North American Hydrogen Sensor Standards

    O' Malley, Kathleen [SRA International, Inc., Colorado Springs, CO (United States); Lopez, Hugo [UL LLC, Chicago, IL (United States); Cairns, Julie [CSA Group, Cleveland, OH (United States); Wichert, Richard [Professional Engineering, Inc.. Citrus Heights, CA (United States); Rivkin, Carl [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burgess, Robert [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Buttner, William [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-08-11

    An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensors in hydrogen infrastructure are presented.

  18. Standard plants, standard outages: the EdF approach

    Miron, J.L.

    1991-01-01

    At the end of 1990 Electricite de France had carried out a total of 350 PWR refuelling outages. Although the French units are standardized the routine of the outages are not all the same. The major influences on outages were: setting up new organizations to apply quality assurance regulations; improving systematic experience feedback; incorporating modifications in the outage schedules; assumilation of computerized maintenance management by the sites. (author)

  19. 40 CFR 141.601 - Standard monitoring.

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Standard monitoring. 141.601 Section... Standard monitoring. (a) Standard monitoring plan. Your standard monitoring plan must comply with paragraphs (a)(1) through (a)(4) of this section. You must prepare and submit your standard monitoring plan...

  20. 18 CFR 39.5 - Reliability Standards.

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Reliability Standards... RELIABILITY STANDARDS § 39.5 Reliability Standards. (a) The Electric Reliability Organization shall file each Reliability Standard or modification to a Reliability Standard that it proposes to be made effective under...

  1. A Metadata Standard for Hydroinformatic Data Conforming to International Standards

    Notay, Vikram; Carstens, Georg; Lehfeldt, Rainer

    2017-04-01

    The affordable availability of computing power and digital storage has been a boon for the scientific community. The hydroinformatics community has also benefitted from the so-called digital revolution, which has enabled the tackling of more and more complex physical phenomena using hydroinformatic models, instruments, sensors, etc. With models getting more and more complex, computational domains getting larger and the resolution of computational grids and measurement data getting finer, a large amount of data is generated and consumed in any hydroinformatics related project. The ubiquitous availability of internet also contributes to this phenomenon with data being collected through sensor networks connected to telecommunications networks and the internet long before the term Internet of Things existed. Although generally good, this exponential increase in the number of available datasets gives rise to the need to describe this data in a standardised way to not only be able to get a quick overview about the data but to also facilitate interoperability of data from different sources. The Federal Waterways Engineering and Research Institute (BAW) is a federal authority of the German Federal Ministry of Transport and Digital Infrastructure. BAW acts as a consultant for the safe and efficient operation of the German waterways. As part of its consultation role, BAW operates a number of physical and numerical models for sections of inland and marine waterways. In order to uniformly describe the data produced and consumed by these models throughout BAW and to ensure interoperability with other federal and state institutes on the one hand and with EU countries on the other, a metadata profile for hydroinformatic data has been developed at BAW. The metadata profile is composed in its entirety using the ISO 19115 international standard for metadata related to geographic information. Due to the widespread use of the ISO 19115 standard in the existing geodata infrastructure

  2. 76 FR 81295 - Cost Accounting Standards: Cost Accounting Standards 412 and 413-Cost Accounting Standards...

    2011-12-27

    ... accounting standards governing measurement, assignment, and allocation of costs to contracts with the United... contracting parties; Measurement of pension costs must be objectively verifiable; Accounting rules must keep... cost accounting that preclude their use for the appropriate measurement, assignment and allocation of...

  3. Telemetry Standards, RCC Standard 106-17, Annex A.1, Pulse Amplitude Modulation Standards

    2017-07-01

    Standard 106-17 Annex A.1, July 2017 A.1-iii Acronyms dB decibel FM frequency modulation IF intermediate frequency PAM pulse amplitude...premodulation filter when employed. b. One-fifth of the intermediate frequency (IF) bandwidth (3 dB points) selected from the IF bandwidths listed in

  4. Fulfilling a Promise: Standards for Technological Literacy.

    Bybee, Rodger W.

    2003-01-01

    Discusses the place of standards in U.S. education, the development of the Standards for Technological Literacy, and the recent publication of "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards." (Contains 21 references.) (SK)

  5. ITS Standards Advisory : Dynamic Message Signs (DMS)

    2003-01-01

    ITS Standards Advisories provide the transportation community with information and guidance on key activities related to ITS standards, with each Advisory focusing on a single ITS application and its corresponding standards. This advisory focuses on ...

  6. Editorial: Journal article reporting standards.

    Kazak, Anne E

    2018-01-01

    In this editorial, the author notes that this issue of American Psychologist features a pair of important articles related to newly updated standards for reporting research in psychology in scientific journals, covering both quantitative (Appelbaum et al., 2018) and qualitative (Levitt et al., 2018) research. The increasing breadth and complexity of research, and the importance of communicating it effectively, requires user-friendly resources that can be applied widely to scientific studies. These two articles are intended to serve that purpose, and to encourage thoroughness and accuracy in research reporting, for psychologists and other scientists in broader academic communities. The articles, known as the Journal Article Reporting Standards (JARS) reports, are based on the work of a task force appointed by the American Psychological Association (APA) Publications and Communications Board in 2015. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  7. Custom v. Standardized Risk Models

    Zura Kakushadze

    2015-05-01

    Full Text Available We discuss when and why custom multi-factor risk models are warranted and give source code for computing some risk factors. Pension/mutual funds do not require customization but standardization. However, using standardized risk models in quant trading with much shorter holding horizons is suboptimal: (1 longer horizon risk factors (value, growth, etc. increase noise trades and trading costs; (2 arbitrary risk factors can neutralize alpha; (3 “standardized” industries are artificial and insufficiently granular; (4 normalization of style risk factors is lost for the trading universe; (5 diversifying risk models lowers P&L correlations, reduces turnover and market impact, and increases capacity. We discuss various aspects of custom risk model building.

  8. Standard model of knowledge representation

    Yin, Wensheng

    2016-09-01

    Knowledge representation is the core of artificial intelligence research. Knowledge representation methods include predicate logic, semantic network, computer programming language, database, mathematical model, graphics language, natural language, etc. To establish the intrinsic link between various knowledge representation methods, a unified knowledge representation model is necessary. According to ontology, system theory, and control theory, a standard model of knowledge representation that reflects the change of the objective world is proposed. The model is composed of input, processing, and output. This knowledge representation method is not a contradiction to the traditional knowledge representation method. It can express knowledge in terms of multivariate and multidimensional. It can also express process knowledge, and at the same time, it has a strong ability to solve problems. In addition, the standard model of knowledge representation provides a way to solve problems of non-precision and inconsistent knowledge.

  9. Standardization of beam line representations

    Carey, David C.

    1998-01-01

    Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

  10. Standard guide for computed radiography

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide provides general tutorial information regarding the fundamental and physical principles of computed radiography (CR), definitions and terminology required to understand the basic CR process. An introduction to some of the limitations that are typically encountered during the establishment of techniques and basic image processing methods are also provided. This guide does not provide specific techniques or acceptance criteria for specific end-user inspection applications. Information presented within this guide may be useful in conjunction with those standards of 1.2. 1.2 CR techniques for general inspection applications may be found in Practice E2033. Technical qualification attributes for CR systems may be found in Practice E2445. Criteria for classification of CR system technical performance levels may be found in Practice E2446. Reference Images Standards E2422, E2660, and E2669 contain digital reference acceptance illustrations. 1.3 The values stated in SI units are to be regarded as the st...

  11. Standardization of beam line representations

    Carey, David C.

    1999-01-01

    Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

  12. Ecological aspects to the use of pretreated waste in thermal plants; Oekologische Aspekte beim Einsatz aufbereiteter Abfaelle in thermischen Anlagen

    Friedel, M.; Urban, A.I. [Kassel Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    1998-09-01

    The present contribution focuses on the input side of individual process techniques. It shows on the basis of example calculations how two parameters describing the incinerable (residual) waste that are of particular importance for unconventional thermal treatment methods, namely ``pollutant load`` and ``calorific value``, can be influenced by a recycling stage and then further by mechanical-biological pretreatment. [Deutsch] Im folgenden soll das Hauptaugenmerk auf die Inputseite zu den einzelnen thermischen Verfahren gelegt werden und anhand einer Beispielrechnung aufgezeigt werden, wie sich die fuer einen Einsatz in nichtkonventionellen thermischen Verfahren besonders wichtigen Parameter des aufbereiteten (Rest)Abfalls `Schadstoffbelastung` und `Heizwert` zunaechst durch eine Verwertung und weiter durch eine mechanisch-biologische Vorbehandlung veraendern. (orig./SR)

  13. Ecological improvements in conjunction with the new RADAG hydro power plant; Oekologische Aufwertungsmassnahmen beim Neubau des Wehrkraftwerks der RADAG

    Ruess, Beatrice [RUS AG, Baden (Switzerland)

    2010-07-01

    Together the weir power plant and the upgrading measures will create salient ecological improvements of the actual conditions of the residual water route. Of special importance are the increased runoff into the Old Rhine and the additional structuring measures. The natural evasion waters combined with the Collection Gallery and the Vertical Slot fish ladder together with the new fish ladder at the Main Power Station will on one hand greatly improve the longitudinal continuum and on the other hand create habitats for species relying on strong-flowing waters. (orig.)

  14. Ecological assessment of agricultural co-substrates for biogas production; Oekologische Bewertung der Bereitstellung landwirtschaftlicher Kosubstrate zur Biogaserzeugung

    Ploechl, M; Heiermann, M [Abt. Technikbewertung und Stoffkreislauefe, Inst. fuer Agrartechnik Bomim, Potsdam (Germany)

    2002-07-01

    This paper presents the results of simplified life cycle assessments (LCA) of the cultivation of a variety of crops suitable for biogas production. The simplification refers to that only greenhouse gases and the cumulated energy requirements (CER) are regarded. The values for the greenhouse gas emissions expressed as CO{sub 2} equivalents are around 130 g CO{sub 2}eq.kg{sup -1} ODM with lowest value of 75.5 g CO{sub 2}eq.kg{sup -1} ODM for hemp (Cannabis sativa) and the highest value of 170 g CO{sub 2}eq.kg{sup -1} ODM for rape (Brassica napus). Considering electric power as final product and referring therefore on kWh as unit the differences become even greater, mainly because of the different methane production potentials. On this basis the lowest value amounts to 84 g CO{sub 2}eq.kWh{sup -1} for alfalfa (Medicago sativa) and the highest value amounts to 438 g CO{sub 2}eq.kWh{sup -1} for rape. This general trend that the LCA identifies hemp, forage grass (Dactylis, Lolium and Festuca species), alfalfa, and maize (Zea mays) to have a low ecologic input and rape to have a high ecologic input is confirmed regarding the CER. The CER values are lowest with 0.82 MJ.kWh{sup -1} for maize and forage grass and highest with 3.47 MJ.kWh{sup -1} for rape. (orig.)

  15. Ecological interdependences between fish fauna and habitat structures of the Elbe river; Oekologische Zusammenhaenge zwischen Fischgemeinschafts- und Lebensraumstrukturen der Elbe

    Thiel, R. [Institut fuer Hydrobiologie und Fischereiwissenschaft - Elbelabor, Universitaet Hamburg, Hamburg (Germany); Buslovich, R.; Gerkens, M. [and others

    2000-07-01

    Fluvial fishes are good indicators of the habitat quality in river systems. However, no quantitative data about the relationships between the ecomorphology of the Elbe River and its fish community were available. Therefore, fish ecological assessments or predictions of the development of the fish populations were not possible. Since March 1997, a project financed by the Federal Ministry of Education, Science, Research and Technology focuses on mathematical modelling of the habitat used of all life history stages of the fish fauna. The results of the project shall support decisions in the framework of changing ecomorphology in the Elbe River. (orig.)

  16. An ecologic accompanying research on the fleet test electromobility. Final report; Oekologische Begleitforschung zum Flottenversuch Elektromobilitaet. Endbericht

    Helms, Heinrich; Lambrecht, Udo; Joehrens, Julius; Pehnt, Martin; Liebich, Axel; Weiss, Uta; Kaemper, Claudia

    2013-06-15

    Mobility is a prerequisite for numerous economic and private activities and thus a central component of our life. The demand for mobility in Germany is predominantly covered by the road traffic. The Institute for Energy and Environmental Research (Heidelberg, Federal Republic of Germany) carried out an ecologic accompanying research in the course of a fleet test in order to determine the potentials of environmental improvement of the vehicles tested in a field test. These potentials were perpetuated for future serial vehicles and projected to Germany. The main themes of this contribution are: (a) Production and disposal of plug-in-hybrids; (b) The TwinDrive in the fleet test; (c) Plug-in-hybrid serial vehicles 2020; (d) Perspective of electromobility in Germany 2030; (e) Strategic evaluation of the electomobility.

  17. Life cycle assessment of energy products: environmental impact assessment of biofuels; Oekobilanz von Energieprodukten: Oekologische Bewertung von Biotreibstoffen

    Zah, R.; Boeni, H.; Gauch, M.; Hischier, R.; Lehmann, M.; Waeger, P.

    2007-05-15

    This final report for the Swiss Federal Office of Energy (SFOE) deals with the results of a study that evaluated the environmental impact of the entire production chain of fuels made from biomass and used in Switzerland. Firstly, the study supplies an analysis of the possible environmental impacts of biofuels that can be used as a basis for political decisions. Secondly, an environmental life cycle assessment (LCA) of various biofuels is presented. In addition, the impacts of fuel use are compared with other uses for bioenergy such as the generation of electricity and heat. The methods used in the LCA are discussed, including the Swiss method of ecological scarcity (Environmental Impact Points, UBP 06), and the European Eco-indicator 99 method. The results of the study are discussed, including the finding that not all biofuels can reduce environmental impacts as compared to fossil fuels. The role to be played by biofuels produced in an environmentally-friendly way together with other forms of renewable energy in our future energy supply is discussed.

  18. Ecological assessment of new CHP systems and their combination; Oekologische Bewertung neuer WKK-Systeme und Systemkombinationen - Schlussbericht

    Primas, A.

    2007-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) reports on new developments in the Combined Heat and Power (CHP) generation area. The objective of this study is an ecological and technical evaluation of various CHP systems and system combinations. These also include suitable combinations with other technologies. Systems for five different temperature levels are quantified according to their environmental impact. Various possible applications are compared with a highly efficient reference system using separate heat and power generation - a combined-cycle plant and a heat pump. For chilled water production a combination of the CHP system with an absorption chiller is investigated. The results of the investigations are presented and commented on. Also, advantageous applications of CHP systems are noted.

  19. Nuclear security standard: Argentina approach

    Bonet Duran, Stella M.; Rodriguez, Carlos E.; Menossi, Sergio A.; Serdeiro, Nelida H.

    2007-01-01

    Argentina has a comprehensive regulatory system designed to assure the security and safety of radioactive sources, which has been in place for more than fifty years. In 1989 the Radiation Protection and Nuclear Safety branch of the National Atomic Energy Commission created the 'Council of Physical Protection of Nuclear Materials and Installations' (CAPFMIN). This Council published in 1992 a Physical Protection Standard based on a deep and careful analysis of INFCIRC 225/Rev.2 including topics like 'sabotage scenario'. Since then, the world's scenario has changed, and some concepts like 'design basis threat', 'detection, delay and response', 'performance approach and prescriptive approach', have been applied to the design of physical protection systems in facilities other than nuclear installations. In Argentina, radioactive sources are widely used in medical and industrial applications with more than 1,600 facilities controlled by the Nuclear Regulatory Authority (in spanish ARN). During 2005, measures like 'access control', 'timely detection of intruder', 'background checks', and 'security plan', were required by ARN for implementation in facilities with radioactive sources. To 'close the cycle' the next step is to produce a regulatory standard based on the operational experience acquired during 2005. ARN has developed a set of criteria for including them in a new standard on security of radioactive materials. Besides, a specific Regulatory Guide is being prepared to help licensees of facilities in design a security system and to fulfill the 'Design of Security System Questionnaire'. The present paper describes the proposed Standard on Security of Radioactive Sources and the draft of the Nuclear Security Regulatory Guidance, based on our regulatory experience and the latest international recommendations. (author)

  20. Standardization of detector control systems

    Fukunaga, Chikara

    2000-01-01

    Current and future detectors for high-energy and/or nuclear physics experiments require highly intelligent detector control systems. In order to reduce resources, the construction of a standardized template for the control systems based on the commercially available superviser control and data acquisition (SCADA) system has been proposed. The possibility of constructing this template is discussed and several key issues for evaluation of SCADA as the basis for such a template are presented. (author)

  1. Reactive Programming in Standard ML

    Pucella, Riccardo

    2004-01-01

    Reactive systems are systems that maintain an ongoing interaction with their environment, activated by receiving input events from the environment and producing output events in response. Modern programming languages designed to program such systems use a paradigm based on the notions of instants and activations. We describe a library for Standard ML that provides basic primitives for programming reactive systems. The library is a low-level system upon which more sophisticated reactive behavi...

  2. The standard for program management

    2017-01-01

    The Standard for Program Management – Fourth Edition differs from prior editions by focusing on the principles of good program management. Program activities have been realigned to program lifecycle phases rather than topics, and the first section was expanded to address the key roles of program manager, program sponsor and program management office. It has also been updated to better align with PMI’s Governance of Portfolios, Programs, and Projects: A Practice Guide.

  3. Toronto green roof construction standard

    Aster, D.

    2007-01-01

    Toronto City Council adopted a green roof strategy in February 2006. This paper reviewed the by-law governing the strategy as well as the work in progress to develop minimum standards for the design and construction of green roofs in Toronto. The strategy included a series of recommendations regarding the installation of green roofs on city buildings; a pilot grant program; using the development process to encourage green roofs; and, public education and promotion. It was noted that compared to Europe, the development of standards for green roofs in North America is in its early stages. As an emerging sustainable technology, there currently are no standards incorporated into Ontario's Building Code against which Toronto can measure the design and construction of green roofs. Therefore this paper included an analysis detailing how the recommended design requirements were able to support the City's green roof policy objectives and integrate the performance criteria for green roofs previously established and supported by Toronto City Council. The key policy objectives of the City's green roof strategy were to reduce the urban heat island effect; to address stormwater management implications in terms of quality and quantity; to improve the energy budgets of individual buildings; and, to improve air quality

  4. Developing standardized facility contingency plans

    Davidson, D.A.

    1993-01-01

    Texaco consists of several operating departments that are, in effect, independent companies. Each of these departments is responsible for complying with all environmental laws and regulations. This includes the preparation by each facility to respond to an oil spill at that location. For larger spills, however, management of the response will rest with corporate regional response teams. Personnel from all departments make up the regional teams. In 1990, Congress passed the Oil Pollution Act. In 1991, the US Coast Guard began developing oil spill response contingency plan regulations, which they are still working on. Meanwhile, four of the five west coast states have also passed laws requiring contingency plans. (Only Hawaii has chosen to wait and see what the federal regulations will entail). Three of the states have already adopted regulations. Given these laws and regulations, along with its corporate structure, Texaco addressed the need to standardize local facility plans as well as its response organization. This paper discusses how, by working together, the Texaco corporate international oil spill response staff and the Texaco western region on-scene commander developed: A standard contingency plan format crossing corporate boundaries and meeting federal and state requirements. A response organization applicable to any size facility or spill. A strategy to sell the standard contingency plan and response organization to the operating units

  5. Radioactivity standards for drinking water

    Sastry, V.N.; Mahadevan, T.N.; Nair, R.N.; Krishnamoorthy, T.M.; Nambi, K.S.V.

    1995-01-01

    The Bureau of Indian Standards (BIS) had issued drinking water specifications for radioactivity in 1991 as 0.1 Bq/L for gross α and 1 pCi/L for gross β. The specification for gross β should have been 1 Bq/L, however the basis for arriving at these standards were not clearly stated. The radiological basis for fixing the Drinking Water Standards (DWS) has, therefore, been reviewed in the present work. The values derived now for gross α (0.01 Bq/L) and gross β (0.34 Bq/L) are different from the values given above. In addition, the DWS for some important radionuclides using the ingestion dose factors applicable to members of the general public (adult as well as children) are given here. It is hoped that the presently suggested values will be accepted by the Atomic Energy Regulatory Board and adopted by the BIS in the near future. (author). 14 refs., 2 tabs., 2 ills

  6. Successive Standardization of Rectangular Arrays

    Richard A. Olshen

    2012-02-01

    Full Text Available In this note we illustrate and develop further with mathematics and examples, the work on successive standardization (or normalization that is studied earlier by the same authors in [1] and [2]. Thus, we deal with successive iterations applied to rectangular arrays of numbers, where to avoid technical difficulties an array has at least three rows and at least three columns. Without loss, an iteration begins with operations on columns: first subtract the mean of each column; then divide by its standard deviation. The iteration continues with the same two operations done successively for rows. These four operations applied in sequence completes one iteration. One then iterates again, and again, and again, ... In [1] it was argued that if arrays are made up of real numbers, then the set for which convergence of these successive iterations fails has Lebesgue measure 0. The limiting array has row and column means 0, row and column standard deviations 1. A basic result on convergence given in [1] is true, though the argument in [1] is faulty. The result is stated in the form of a theorem here, and the argument for the theorem is correct. Moreover, many graphics given in [1] suggest that except for a set of entries of any array with Lebesgue measure 0, convergence is very rapid, eventually exponentially fast in the number of iterations. Because we learned this set of rules from Bradley Efron, we call it “Efron’s algorithm”. More importantly, the rapidity of convergence is illustrated by numerical examples.

  7. WHO Standard Acupuncture Point Locations

    Sabina Lim

    2010-01-01

    Full Text Available ‘WHO Standard Acupuncture Point Locations in the Western Pacific Region (WHO Standard was released in 2008. Initially, there were 92/361 controversial acupuncture points (acupoints. Through seven informal consultations and four task force team meetings, 86 points were agreed upon among the 92 controversial acupoints, leaving 6 remaining controversial acupoints, demanding active research in the future. This will enhance the reproducibility and validity of acupuncture studies. It will also lead to a better understanding of acupuncture mechanisms in order to optimize its clinical efficacy for a range of diseases and syndromes. This book has two parts: General Guidelines for Acupuncture Point Locations and WHO Standard Acupuncture Point Locations. First of all, familiarity with the General Guidelines for Acupuncture Point Locations in this book can help the reader to understand and use the contents of this book in depth. I would like to thank all of the participating experts and scholars for this great work, who have overcome the limits of previous acupuncture references. I also appreciate the dedicated effort and harmonious leadership of Dr Choi Seung-hoon, former Regional Adviser in Traditional Medicine of Western Pacific Office, WHO.

  8. Basic standards for radiation protection

    Webb, G.A.M.

    1982-01-01

    The basic standards for radiation protection have been based, for many years, on the recommendations of the International Commission of Radiological Protection. The three basic standards recommended by the Commission may be summarized as ''justification, optimization of protection and adherence to dose limitations. The applications of these basic principles to different aspects of protection are briefly summarized and the particular ways in which they have been applied to waste described in more detail. The application of dose limits, both in the control of occupational exposure and in regulating routine discharges of radioactive effluents is straight forward in principle although the measurement and calculational requirements may be substantial. Secondary standards such as derived limits may be extremely useful and the principles underlying their derivation will be described. Optimization of protection is inherently a more difficult concept to apply in protection and the various techniques used will be outlined by with particular emphasis on the use of cost benefit analysis are recommended by the ICRP. A review will be given of the problems involved in extending these basic concepts of the ICRP to probabilistic analyses such as those required for assessing the consequences of accidents or disruptive events in long term repositories. The particular difficulties posed by the very long timescales involved in the assessment of waste management practices will be discussed in some detail. (orig./RW)

  9. STANDARDIZATION AS A DILEMNATIC POLICY

    Suatmo Pantja Putra

    2017-03-01

    Full Text Available Standard language is generally regarded as language well establishe by usage in the speech and writing of educated people. As a product of schooling, this learnt language has, in may societies, come to assume a special place and is looked upon as an authoritative model of correctness and quality and, at its best, perfection. In language conscious speech communities, standard language also serves as a reliable measure of language profeciency which is made use of by people in administrative or educational authority. Language planners and prcatitioners in particular are charged with the responsibility of upholding this language in its purest forms. Meanwhile, the learning and teaching of standard language have become accepted as an integral part of every national or state-level educational system�s long-term obligations. This paper presents the discussion on the innappropriateness of the use of them �standard� instead of �standardized� language. It also suggests that planning for language policy within a particular situation inevitably demands taking into account not only multiple social factors and goverment goals, but also the ways in which these conditions affect language and literary acquisition across segments of the population, otherwise it can be a dilemnatic and problematic policy.

  10. The standard model and beyond

    Gaillard, M.K.

    1989-05-01

    The field of elementary particle, or high energy, physics seeks to identify the most elementary constituents of nature and to study the forces that govern their interactions. Increasing the energy of a probe in a laboratory experiment increases its power as an effective microscope for discerning increasingly smaller structures of matter. Thus we have learned that matter is composed of molecules that are in turn composed of atoms, that the atom consists of a nucleus surrounded by a cloud of electrons, and that the atomic nucleus is a collection of protons and neutrons. The more powerful probes provided by high energy particle accelerators have taught us that a nucleon is itself made of objects called quarks. The forces among quarks and electrons are understood within a general theoretical framework called the ''standard model,'' that accounts for all interactions observed in high energy laboratory experiments to date. These are commonly categorized as the ''strong,'' ''weak'' and ''electromagnetic'' interactions. In this lecture I will describe the standard model, and point out some of its limitations. Probing for deeper structures in quarks and electrons defines the present frontier of particle physics. I will discuss some speculative ideas about extensions of the standard model and/or yet more fundamental forces that may underlie our present picture. 11 figs., 1 tab

  11. Study of federal microwave standards

    David, L.

    1980-08-01

    Present and future federal regulatory processes which may impact the permissible levels of microwave radiation emitted by the SPS Microwave Power Transmission (MPTS) were studied. An historical development of US occupational and public microwave standards includes an overview of Western and East European philosophies of environmental protection and neurophysiology which have led to the current widely differing maximum permissible exposure limits to microwaves. The possible convergence of microwave standards is characterized by a lowering of Western exposure levels while Eastern countries consider standard relaxation. A trend toward stricter controls on activities perceived as harmful to public health is under way as is interest in improving the federal regulatory process. Particularly relevant to SPS is the initiation of long-term, low-level microwave exposure programs. Coupled with new developments in instrumentation and dosimetry, the results from chronic exposure program and population exposure studies could be expected within the next five to ten years. Also discussed is the increasing public concern that rf energy is yet another hazardous environmental agent.

  12. Software Development Standard Processes (SDSP)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; hide

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  13. Active Faraday optical frequency standard.

    Zhuang, Wei; Chen, Jingbiao

    2014-11-01

    We propose the mechanism of an active Faraday optical clock, and experimentally demonstrate an active Faraday optical frequency standard based on narrow bandwidth Faraday atomic filter by the method of velocity-selective optical pumping of cesium vapor. The center frequency of the active Faraday optical frequency standard is determined by the cesium 6 (2)S(1/2) F=4 to 6 (2)P(3/2) F'=4 and 5 crossover transition line. The optical heterodyne beat between two similar independent setups shows that the frequency linewidth reaches 281(23) Hz, which is 1.9×10(4) times smaller than the natural linewidth of the cesium 852-nm transition line. The maximum emitted light power reaches 75 μW. The active Faraday optical frequency standard reported here has advantages of narrow linewidth and reduced cavity pulling, which can readily be extended to other atomic transition lines of alkali and alkaline-earth metal atoms trapped in optical lattices at magic wavelengths, making it useful for new generation of optical atomic clocks.

  14. Extensions of the standard model

    Ramond, P.

    1983-01-01

    In these lectures we focus on several issues that arise in theoretical extensions of the standard model. First we describe the kinds of fermions that can be added to the standard model without affecting known phenomenology. We focus in particular on three types: the vector-like completion of the existing fermions as would be predicted by a Kaluza-Klein type theory, which we find cannot be realistically achieved without some chiral symmetry; fermions which are vector-like by themselves, such as do appear in supersymmetric extensions, and finally anomaly-free chiral sets of fermions. We note that a chiral symmetry, such as the Peccei-Quinn symmetry can be used to produce a vector-like theory which, at scales less than M/sub W/, appears to be chiral. Next, we turn to the analysis of the second hierarchy problem which arises in Grand Unified extensions of the standard model, and plays a crucial role in proton decay of supersymmetric extensions. We review the known mechanisms for avoiding this problem and present a new one which seems to lead to the (family) triplication of the gauge group. Finally, this being a summer school, we present a list of homework problems. 44 references

  15. [Modularization by the open standard. (II)].

    Muto, M; Takaha, Y; Chiba, N

    2000-10-01

    In recent years, accompanied by the marvelous development and spread of Laboratory Automation System(LAS), the NCCLS is now proposing five international standards for laboratory automation. We have based our laboratory on these "NCCLS standards of laboratory automation", we take these standards ahead first, and we now propose an open standard called "Open LA 21", to establish more detailed standard replacing the NCCLS laboratory automation standards.

  16. 106-17 Telemetry Standards Front Matter

    2017-07-01

    Frequency Division Multiplexing Telemetry Standards CHAPTER 4: Pulse Code Modulation Standards CHAPTER 5: Digitized Audio Telemetry Standard CHAPTER 6...Transfer Standard Chapter 9, Appendix 9-A Appendix I, Telemetry Attributes Transfer Standard Cover Sheet Chapter 9, Appendix 9-B Telemetry Standards...Derived Parameter Specification Chapter 9, Appendix 9-E Appendix Q, Extended Binary Golay Code Chapter 7, Appendix 7-A Appendix R, Low-Density Parity

  17. The national standards program for research reactors

    Whittemore, W.L.

    1977-01-01

    In 1970 a standards committee called ANS-15 was established by the American Nuclear Society (ANS) to prepare appropriate standards for research reactors. In addition, ANS acts as Secretariat for a national standards committee N17 which is responsible to the American National Standards Institute (ANSI) for the national consensus efforts for standards related to research reactors. To date ANS-15 has completed or is working on 14 standards covering all aspects of the operation of research reactors. Of the 11 research reactor standards submitted to the ANSI N17 Committee since its inception, six have been issued as National standards, and the remaining are still in the process of review. (author)

  18. Authentication: A Standard Problem or a Problem of Standards?

    Amanda Capes-Davis

    2016-06-01

    Full Text Available Reproducibility and transparency in biomedical sciences have been called into question, and scientists have been found wanting as a result. Putting aside deliberate fraud, there is evidence that a major contributor to lack of reproducibility is insufficient quality assurance of reagents used in preclinical research. Cell lines are widely used in biomedical research to understand fundamental biological processes and disease states, yet most researchers do not perform a simple, affordable test to authenticate these key resources. Here, we provide a synopsis of the problems we face and how standards can contribute to an achievable solution.

  19. Standard deviation and standard error of the mean.

    Lee, Dong Kyu; In, Junyong; Lee, Sangseok

    2015-06-01

    In most clinical and experimental studies, the standard deviation (SD) and the estimated standard error of the mean (SEM) are used to present the characteristics of sample data and to explain statistical analysis results. However, some authors occasionally muddle the distinctive usage between the SD and SEM in medical literature. Because the process of calculating the SD and SEM includes different statistical inferences, each of them has its own meaning. SD is the dispersion of data in a normal distribution. In other words, SD indicates how accurately the mean represents sample data. However the meaning of SEM includes statistical inference based on the sampling distribution. SEM is the SD of the theoretical distribution of the sample means (the sampling distribution). While either SD or SEM can be applied to describe data and statistical results, one should be aware of reasonable methods with which to use SD and SEM. We aim to elucidate the distinctions between SD and SEM and to provide proper usage guidelines for both, which summarize data and describe statistical results.

  20. 75 FR 64684 - Cost Accounting Standards: Elimination of the Exemption From Cost Accounting Standards for...

    2010-10-20

    ... cost accounting standards governing the measurement, assignment, and allocation of costs to contracts... Accounting Standards: Elimination of the Exemption From Cost Accounting Standards for Contracts Executed and... and Budget (OMB), Office of Federal Procurement Policy, Cost Accounting Standards Board. ACTION...

  1. Establishment of Filipino standard man

    Natera, E.; San Jose, V.; Napenas, D.

    1984-01-01

    The initial data gathered on measurements of total body weight and weights of specific organs from autopsy cases of normal Filipinos are reported. Comparison of the above data with the Reference Man data of ICRP which was based primarily on Caucasians suggests some differences in the average weight and height of whole body and in the weights of some organs. Hence there appears to be a need for the establishment of Filipino standard man which can be used in the estimation of internal dose commitment of the Filipinos. (author)

  2. Radiation safety: New international standards

    Gonzalez, A.J.

    1994-01-01

    This article highlights an important result of this work for the international harmonization of radiation safety: specifically, it present an overview of the forthcoming International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources - the so-called BSS. They have been jointly developed by six organizations - the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (NEA/OECD), the Pan American Health Organization (PAHO), and the World Health Organization (WHO)

  3. Standard beam PWC for Fermilab

    Fenker, H.

    1983-02-01

    As one of its projects the Fermilab Experimental Areas Department has been designed and tested a relatively small proportional wire chamber for use in the secondary beam lines. It is intended to supplement the variety of detectors known in the vernacular as SWICS that are used to obtain profiles for beam tuning. The new detector, described in this report, operates in the limited proportional mode and allows experimenters to use a standard, lab supported device for associating trajectories of individual beam particles with events triggering their own experiment's apparatus. A completed triple plane module is shown

  4. Fluorescence of ceramic color standards

    Koo, Annette; Clare, John F.; Nield, Kathryn M.; Deadman, Andrew; Usadi, Eric

    2010-01-01

    Fluorescence has been found in color standards available for use in calibration and verification of color measuring instruments. The fluorescence is excited at wavelengths below about 600 nm and emitted above 700 nm, within the response range of silicon photodiodes, but at the edge of the response of most photomultipliers and outside the range commonly scanned in commercial colorimeters. The degree of fluorescence on two of a set of 12 glossy ceramic tiles is enough to introduce significant error when those tiles have been calibrated in one mode of measurement and are used in another. We report the nature of the fluorescence and the implications for color measurement.

  5. Physical standards and valid caibration

    Smith, D.B.

    1975-01-01

    The desire for improved nuclear material safeguards has led to the development and use of a number and techniques and instruments for the nondestructive assay (NDA) of special nuclear material. Sources of potential bias in NDA measurements are discussed and methods of eliminating the effects of bias in assay results are suggested. Examples are given of instruments in which these methods have been successfully applied. The results of careful attention to potential sources of assay bias are a significant reduction in the number and complexity of standards required for valid instrument calibration and more credible assay results. (auth)

  6. Heat flow of standard depth

    Cull, J.P.

    1981-01-01

    Secular and long-term periodic changes in surface temperature cause perturbations to the geothermal gradient which may be significant to depths of at least 1000 m, and major corrections are required to determine absolute values of heat flow from the Earth's interior. However, detailed climatic models remain contentious and estimates of error in geothermal gradients differ widely. Consequently, regions of anomalous heat flow which could contain geothermal resources may be more easily resolved by measuring relative values at a standard depth (e.g. 100 m) so that all data are subject to similar corrections. (orig./ME)

  7. Review of the standard model

    Treille, D.

    1992-01-01

    The goal of this review is not to make one more celebration of the accuracy of LEP results, but rather to put them in a broader perspective. This set of measurements are compared with what they could and should be in the future if the various options available at LEP are exploited properly, and show that much is left to be done. Then various classes of non-LEP results are discussed which are already remarkable and still prone to improvements, which bring complementary information on the Standard Model, by probing it in widely different domains of applicability. (author) 46 refs.; 29 figs.; 12 tabs

  8. Establishment of Filipino standard man

    Natera, E.; San Jose, V.; Napenas, D.

    The initial data gathered on measurements of total body weight and weights of specific organs from autopsy cases of normal Filipinos are reported. Comparison of the above data with the Reference Man data of ICRP which was based primarily on Caucasians suggests some differences in the average weight and height of whole body and in the weights of some organs. Hence there appears to be a need for the establishment of Filipino standard man which can be used in the estimation of internal dose commitment of the Filipinos.

  9. Hunting the hidden standard Higgs

    Akhundov, A.A.; Bardin, D.Yu.; Riemann, T.

    1985-01-01

    In the framework of the standard theory of electroweak interactions the Msub(Z) t(the weak neutral gauge form mass) sin sup(2)THETAsub(W) interdependence with account of radiative corrections is investigated as a function of the Higgs boson mass Msub(H) at fixed m sub(t) (mass of heavy up-type quarn). It is shown that precision measurements of Msub(XZ) and sub sup(2)THETAsub(W) at SLC and LEP will allow one to estimate Msub(H) with an accuracy of about 100 GeV

  10. 78 FR 63036 - Transmission Planning Reliability Standards

    2013-10-23

    ... Reliability Standards for the Bulk Power System, 130 FERC ] 61,200 (2010). \\8\\ Mandatory Reliability Standards... electric system operations across normal and contingency conditions. We also find that Reliability Standard... Reliability Standards for the Bulk Power System, 131 FERC ] 61,231 at P 21. Comments 24. NERC supports the...

  11. 39 CFR 121.3 - Standard Mail.

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Standard Mail. 121.3 Section 121.3 Postal Service UNITED STATES POSTAL SERVICE POST OFFICE SERVICES [DOMESTIC MAIL] SERVICE STANDARDS FOR MARKET-DOMINANT MAIL PRODUCTS § 121.3 Standard Mail. (a) End-to-End. (1) The service standard for Sectional Center...

  12. Leveraging Standards to Promote Program Quality

    Young, Michelle D.; Mawhinney, Hanna; Reed, Cynthia J.

    2016-01-01

    Standards provide a foundation for thinking about leadership development and practice. This article explores three sets of standards that impact educational leadership preparation: (a) the recently revised Interstate School Leaders Licensure Consortium (ISLLC) standards, which are now known as the Practice Standards for Educational Leaders (PSEL);…

  13. Uranium standards for Californium Shuffler

    Gibbs, A.; Boynton, S.P.

    1978-10-01

    The Laboratories Department analyzed pieces of a U-Al log which were to be canned and used as a set of standards for the nondestructive Californium Shuffler instrument. Evaluation of this instrument is part of an on-going Safeguards Program and is a joint project between LASL and SRP. A U-Al casting of a nominal 30% to 70% composition was made with enriched uranium (56 wt % 235 U). The log was 6 in. in diameter and approximately 2 ft long. A 1/4-in. slice was made before and after each 1-in. slice taken for use as a standard. The 1-in. slices were scanned nondestructively by collimated gamma pulse height analysis. The 1/4-in. slices were divided into quadrants and one quadrant for each slice was destructively analyzed. Results from these tests showed an approximate 1.5% relative variation in uranium concentration from the high to the low point. Successive pieces showed less than 1% relative difference. The 1-in. pieces have been canned and shipped to LASL for testing and will be returned with the Californium Shuffler. The remaining 1/4-in. slices have been sent to NBL and LASL for destructive analysis

  14. Medical standards for radiation workers

    Rae, S.

    1977-01-01

    The Council of the European Communities in its Directive of June 1, 1976 has laid down revised basic safety standards for the health protection of the general public and workers against the danger of ionising radiation. The Directive requires each Member State of the Community 'for the guidance of medical practitioners.....to draw up a list, which need not be exhaustive, of the criteria which should be taken into account when judging a worker's fitness to be exposed to ionising radiation'. Medical officers with current responsibility for radiation workers in the U.K. therefore met recently for informal exploratory discussion at the National Radiological Protection Board's headquarters, and an account is given of the views expressed there about the composition of the required 'list', and the possibility of standardizing the procedure adopted. Consideration was given to the objectives of medical examinations, the form of examination, and specific conditions which may give rise to difficulty in making a fitness assessment. These conditions are skin abnormalities, blood abnormalities, cataract, pregnancy, and psychological and psychiatric conditions. It was concluded that the medical examination of radiation workers, including blood examinations, are of value to the extent that they form part of any good general occupational health practice. The promulgation of the Euratom Directive has provided an opportunity for reviewing and standardising procedures for medical surveillance in the light of current knowledge concerning average occupational radiation doses and dose-response relationships. (U.K.)

  15. Standard IEC 61850 substation automation

    Bricchi, A.; Mezzadri, D. [Selta, Tortoreto (Italy)

    2008-07-01

    The International Electrotechnical Commission (IEC) 61850 standard is the reference communication protocol for all electrical substations protection and control systems. It creates models of all the elements and functionalities of an electrical substation, including physical elements such as switches or circuit breakers, as well as protection, control and monitoring functionalities. Network managers need to renew power substation automation and control systems in order to improve the efficiency and quality of services offered by electric utilities. Selta has proposed a new integrated solution for the automation of power substations which is fully compliant with the IEC 61850 norms. The solution involves the integration of control, automation, protection, monitoring and maintenance functions and applies leading edge technology to its systems, particularly for the TERNA network. The system is based on the use of many electronic devices at a power plant, each one with a specialized function, and all interconnected via a Station LAN. This solution, was tested on the TERNA network in Italy, in VHV and HV stations. It was shown to offer many advantages, such as an architecture based on full interoperability between control, monitoring and protection equipment; centralized and distributed automation; a LAN station that allows full interoperability between different bay units and protection relays in order to integrate equipment from various suppliers; the integration of automation systems in existing bay units and protection relays equipped with standard communication buses or with proprietary interfaces; and time synchronization for the entire system through a station GPS reception system. 10 refs., 1 tab., 7 figs.

  16. Wellhead and tree standards updated

    Dach, A.J. Jr.; Haeberle, T.

    1996-01-01

    Revisions in the API 6A, 17th Edition, have resolved a number of long-term problems and expanded its scope and coverage of wellhead and christmas tree equipment. The 17th Edition, Feb. 1, 1996, represents the state-of-the-art in international requirements for wellhead and christmas tree equipment. The design, materials, and quality control aspects of API 6A have all been improved with an emphasis on making the document more acceptable around the world. However, there are unresolved issues that raise many questions about the future direction of efforts aimed at international standardization of wellhead and christmas tree equipment. Unfortunately, these unresolved issues confuse both manufacturers and companies purchasing this equipment. This ultimately increases wellhead and christmas tree costs, so it is to everyone's advantage to resolve these issues. This article describes the significant revisions that are included in API 6A, 17th Edition. Also discussed are the regulatory, standardization, and customer acceptance issues that cloud the future of API 6A, 17th Edition

  17. Political and Economic Theory of Standards.

    Vandemoortele, Thijs

    2011-01-01

    Standards are increasingly important in the global market system. Consumers rely progressively more on public standards (set by governments) as well as private standards (set by firms) to make their consumption decisions. Similarly producers rely heavily on standards to gear their production systems to one another and to increase transparency and traceability throughout the supply chain. Standards address a large variety of issues in consumption and production such as nutritional (e.g. low fa...

  18. Establishing the isolated Standard Model

    Wells, James D.; Zhang, Zhengkang; Zhao, Yue

    2017-02-01

    The goal of this article is to initiate a discussion on what it takes to claim ''there is no new physics at the weak scale,'' namely that the Standard Model (SM) is ''isolated.'' The lack of discovery of beyond the SM (BSM) physics suggests that this may be the case. But to truly establish this statement requires proving all ''connected'' BSM theories are false, which presents a significant challenge. We propose a general approach to quantitatively assess the current status and future prospects of establishing the isolated SM (ISM), which we give a reasonable definition of. We consider broad elements of BSM theories, and show many examples where current experimental results are not sufficient to verify the ISM. In some cases, there is a clear roadmap for the future experimental program, which we outline, while in other cases, further efforts - both theoretical and experimental - are needed in order to robustly claim the establishment of the ISM in the absence of new physics discoveries.

  19. Standardization of GPS data processing

    Park, Pil Ho

    2001-06-01

    A nationwide GPS network has been constructed with about 60 permanent GPS stations after late 1990s in Korea. For using the GPS in variety of application area like crustal deformation, positioning, or monitoring upper atmosphere, it is necessary to have ability to process the data precisely. Now Korea Astronomy Observatory has the precise GPS data processing technique in Korea because it is difficult to understand characteristics of the parameters we want to estimate, resolve the integer ambiguity, and analyze many errors. There are three reliable GPS data processing software in the world ; Bernese(University of Berne), GIPSY-OASIS(JPL), GAMIT(MIT). These software allow us to achieve millimeter accuracy in the horizontal position and about 1 cm accuracy vertically even for regional networks with a diameter of several thousand kilometers. But we established the standard of GPS data processing using Bernese as main tool and GIPSY O ASIS as side

  20. River Basin Standards Interoperability Pilot

    Pesquer, Lluís; Masó, Joan; Stasch, Christoph

    2016-04-01

    There is a lot of water information and tools in Europe to be applied in the river basin management but fragmentation and a lack of coordination between countries still exists. The European Commission and the member states have financed several research and innovation projects in support of the Water Framework Directive. Only a few of them are using the recently emerging hydrological standards, such as the OGC WaterML 2.0. WaterInnEU is a Horizon 2020 project focused on creating a marketplace to enhance the exploitation of EU funded ICT models, tools, protocols and policy briefs related to water and to establish suitable conditions for new market opportunities based on these offerings. One of WaterInnEU's main goals is to assess the level of standardization and interoperability of these outcomes as a mechanism to integrate ICT-based tools, incorporate open data platforms and generate a palette of interchangeable components that are able to use the water data emerging from the recently proposed open data sharing processes and data models stimulated by initiatives such as the INSPIRE directive. As part of the standardization and interoperability activities in the project, the authors are designing an experiment (RIBASE, the present work) to demonstrate how current ICT-based tools and water data can work in combination with geospatial web services in the Scheldt river basin. The main structure of this experiment, that is the core of the present work, is composed by the following steps: - Extraction of information from river gauges data in OGC WaterML 2.0 format using SOS services (preferably compliant to the OGC SOS 2.0 Hydrology Profile Best Practice). - Model floods using a WPS 2.0, WaterML 2.0 data and weather forecast models as input. - Evaluation of the applicability of Sensor Notification Services in water emergencies. - Open distribution of the input and output data as OGC web services WaterML, / WCS / WFS and with visualization utilities: WMS. The architecture

  1. Innovation and de facto standardization

    Brem, Alexander; Nylund, Petra; Schuster, Gerd

    2016-01-01

    investigate how the existence of a dominant design affects subsequent innovation in an industry. In particular, we study the influence on innovative performance, radical innovation, and process innovation. Analyzing longitudinal, cross-sectional patent data for more than 2.6 million patents filed from 1978...... to 2013, we find support for our hypotheses that an industry's innovative performance and degree of radical innovation are negatively influenced by dominant design in that industry, and that process innovation is fostered by the occurrence of a dominant design. We discuss the findings in the light...... of the increasing speed of technological development and standardization. Additionally, results from a sensitivity analysis for different threshold values of dominant design call for adjusting a binary definition of dominant design with different threshold values depending on the effects under study....

  2. Preparation of synthetic standard minerals

    Herrick, C.C.; Bustamante, S.J.; Charls, R.W.; Cowan, R.E.; Hakkila, E.A.; Hull, D.E.; Olinger, B.W.; Roof, R.B.; Sheinberg, H.; Herrick, G.C.

    1978-01-01

    A number of techniques for synthetic mineral preparations have been examined. These techniques include hot-pressing in graphite dies at moderate pressures, high-pressure, high-temperature synthesis in a piston and cylinder apparatus, isostatic pressing under helium gas pressures, hydrous mineral preparations using water as the pressure medium, explosion-generated shock waves, and radiofrequency heating. Minerals suitable for equation-of-state studies (three-inch, high-density discs), for thermodynamic property determinations (low-density powders) and for microprobe standards (fusion-cast microbeads) have been prepared. Mechanical stress-strain calculations in the piston-cylinder apparatus have been initiated and their integration with thermal stress calculations is currently under investigation

  3. [Ageing and work: technical standards].

    De Vito, G; Riva, M A; Meroni, R; Cesana, G C

    2010-01-01

    Over the last few years, studies on the relationship between ageing and work have attracted growing interest due to the increased probability among workers of developing major health problems as a consequence of ageing of the working population. Negative outcomes for health are possible when an age-related imbalance appears between physical workload and physical work capacity. Interventions based on workload reductions should help to keep workers on the job for as long as allowed by law. Reference masses by age and sex are suggested by the technical standards of the ISO 11228 series, which are also quoted by Italian law D.Lgs. 81/2008, and EN 1005 series, which recommend limits valid also for manual material handling, and pushing and pulling. Decreasing low back pain prevalence or recurrence, in an ageing population with high prevalence of back disorders, could be more effective than many other approaches to enhance workers' quality of life and consequently maintain and improve workers' performance.

  4. OGC® Sensor Web Enablement Standards

    George Percivall

    2006-09-01

    Full Text Available This article provides a high-level overview of and architecture for the Open Geospatial Consortium (OGC standards activities that focus on sensors, sensor networks, and a concept called the “Sensor Web”. This OGC work area is known as Sensor Web Enablement (SWE. This article has been condensed from "OGC® Sensor Web Enablement: Overview And High Level Architecture," an OGC White Paper by Mike Botts, PhD, George Percivall, Carl Reed, PhD, and John Davidson which can be downloaded from http://www.opengeospatial.org/pt/15540. Readers interested in greater technical and architecture detail can download and read the OGC SWE Architecture Discussion Paper titled “The OGC Sensor Web Enablement Architecture” (OGC document 06-021r1, http://www.opengeospatial.org/pt/14140.

  5. Quasars as Cosmological Standard Candles

    Negrete, C. Alenka; Dultzin, Deborah; Marziani, Paola; Sulentic, Jack W.; Esparza-Arredondo, Donají; Martínez-Aldama, Mary L.; Del Olmo, Ascensión

    2017-01-01

    We propose the use of quasars with accretion rate near the Eddington ratio (extreme quasars) as standard candles. The selection criteria are based on the Eigenvector 1 (E1) formalism. Our first sample is a selection of 334 optical quasar spectra from the SDSS DR7 database with a S/N > 20. Using the E1, we define primary and secondary selection criteria in the optical spectral range. We show that it is possible to derive a redshift-independent estimate of luminosity for extreme Eddington ratio sources. Our results are consistent with concordance cosmology but we need to work with other spectral ranges to take into account the quasar orientation, among other constrains.

  6. Standard for Models and Simulations

    Steele, Martin J.

    2016-01-01

    This NASA Technical Standard establishes uniform practices in modeling and simulation to ensure essential requirements are applied to the design, development, and use of models and simulations (MS), while ensuring acceptance criteria are defined by the program project and approved by the responsible Technical Authority. It also provides an approved set of requirements, recommendations, and criteria with which MS may be developed, accepted, and used in support of NASA activities. As the MS disciplines employed and application areas involved are broad, the common aspects of MS across all NASA activities are addressed. The discipline-specific details of a given MS should be obtained from relevant recommended practices. The primary purpose is to reduce the risks associated with MS-influenced decisions by ensuring the complete communication of the credibility of MS results.

  7. German standard problem No. 2

    Burkhardt, R.

    1980-02-01

    The German Standard Problem Nr. 2 (primary circuits) is meant to check whether the presently available computing programs dealing with ECCS problems are suitable to reflect with sufficient accuracy reload and flooding processes. Changing from conventional calculation methods to the ''best-estimate'' method requires for possibility of exact comparison, as is the case here because of experimental results from the primary circuit test plant. The test plant of KWU Erlangen with primary circuit modeups on a 1:134 scale with exact level indications allows comparative testing where emergency cooling water is loaded into the system filled with saturated steam over cold lanes, or rather over the annulus modeup. The report on hand goes into detail about calculations, anticipated results and their comparison to experimental results. (orig./RW) [de

  8. Biofuels: policies, standards and technologies

    NONE

    2010-09-15

    Skyrocketing prices of crude oil in the middle of the first decade of the 21st century accompanied by rising prices for food focused political and public attention on the role of biofuels. On the one hand, biofuels were considered as a potential automotive fuel with a bright future, on the other hand, biofuels were accused of competing with food production for land. The truth must lie somewhere in-between and is strongly dependent on the individual circumstance in different countries and regions. As food and energy are closely interconnected and often compete with each other for other resources, such as water, the World Energy Council - following numerous requests of its Member Committees - decided to undertake an independent assessment of biofuels policies, technologies and standards.

  9. Quasars as Cosmological Standard Candles

    Negrete, C. Alenka [CONACYT Research Fellow - Instituto de Astronomía, UNAM, Mexico City (Mexico); Dultzin, Deborah [Instituto de Astronomía, UNAM, Mexico City (Mexico); Marziani, Paola [INAF, Osservatorio Astronomico di Padova, Padua (Italy); Sulentic, Jack W. [Instituto de Astrofísica de Andalucía, IAA-CSIC, Granada (Spain); Esparza-Arredondo, Donají [Instituto de Radioastronomía y Astrofísica, Morelia (Mexico); Martínez-Aldama, Mary L.; Del Olmo, Ascensión, E-mail: alenka@astro.unam.mx [Instituto de Astrofísica de Andalucía, IAA-CSIC, Granada (Spain)

    2017-12-15

    We propose the use of quasars with accretion rate near the Eddington ratio (extreme quasars) as standard candles. The selection criteria are based on the Eigenvector 1 (E1) formalism. Our first sample is a selection of 334 optical quasar spectra from the SDSS DR7 database with a S/N > 20. Using the E1, we define primary and secondary selection criteria in the optical spectral range. We show that it is possible to derive a redshift-independent estimate of luminosity for extreme Eddington ratio sources. Our results are consistent with concordance cosmology but we need to work with other spectral ranges to take into account the quasar orientation, among other constrains.

  10. The standard model and beyond

    Vergados, J D

    2017-01-01

    This book contains a systematic and pedagogical exposition of recent developments in particle physics and cosmology. It starts with two introductory chapters on group theory and the Dirac theory. Then it proceeds with the formulation of the Standard Model (SM) of Particle Physics, particle content and symmetries, fully exploiting the first chapters. It discusses the concept of gauge symmetries and emphasizes their role in particle physics. It then analyses the Higgs mechanism and the spontaneous symmetry breaking (SSB). It explains how the particles (gauge bosons and fermions) after SSB acquire a mass and get admixed. The various forms of charged currents are discussed in detail as well as how the parameters of the SM, which cannot be determined by the theory, are fixed by experiment, including the recent LHC data and the Higgs discovery. Quantum chromodynamics is discussed and various low energy approximations to it are presented. The Feynman diagrams are introduced and applied, in a way undertandable by fir...

  11. The SYVAC standards (ed. 2)

    Resnick, M.

    1983-04-01

    The Department of the Environment has embarked on a programme to develop computer models to help with assessment of sites suitable for the disposal of nuclear wastes. The first priority is to produce a system, based on the System Variability Analysis Code (SYVAC) obtained from Atomic Energy of Canada Ltd., suitable for assessing radioactive waste disposal in land repositories containing non heat producing wastes from typical UK sources. The requirements of the SYVAC system development were so diverse that each portion of the development was contracted to a different company. Scicon are responsible for software coordination, system integration and user interface. Their present report deals with SYVAC standards: FORTRAN coding; program documentation; testing guidelines; change control. (U.K.)

  12. Literary Censorship: The Changing Standards

    Laila Al-Sharqi

    2015-11-01

    Full Text Available Censorship is a double-edged sword that has bred legal, political, and moral wrangling across the globe. The basic controversy, which harkens back to ancient times, stems from the motivation and intention of the censoring authority. The censoring authority controls literary and informational contents, based on the promulgated political, moral, religious, and cultural values of the land. Historically, the politicians, judiciary, clergymen, powerful groups, and the public at large were involved in guarding public morals and rooting out obscenity. The obscenity laws outlawed the selling, purchasing, printing, importing, and mailing of obscene items. However, in today's day and age, the Internet has made it difficult to control the circulation of what was once considered obscene. Censorship has evolved to monitor and control online content to keep abreast with the changing times; nevertheless, it does not always effectively control the questionable content. Moreover, in the past, cultural values and demography played a vital role in deciding what needed to be censored. Internet, as an electronic global village, has redefined demography; therefore, the global as well as indigenous standards upon which literature were once analyzed for censorship is now blurred. The promise of free speech has given power to the people that live in mature democracies. However, there should be a self-imposed code of conduct so that the right of free speech does not infringe on others' right of existence. This paper reviews censorship, tracing its historical path and evolution over the years, its changing standards, and its pros and cons. Lastly, the paper discusses the need to conjoin freedom of speech with the responsibility to protect the diverse cultures, religions, races, sects, genders, and especially the young generation.

  13. A New Standard Pulsar Magnetosphere

    Contopoulos, Ioannis; Kalapotharakos, Constantinos; Kazanas, Demosthenes

    2014-01-01

    In view of recent efforts to probe the physical conditions in the pulsar current sheet, we revisit the standard solution that describes the main elements of the ideal force-free pulsar magnetosphere. The simple physical requirement that the electric current contained in the current layer consists of the local electric charge moving outward at close to the speed of light yields a new solution for the pulsar magnetosphere everywhere that is ideal force-free except in the current layer. The main elements of the new solution are as follows: (1) the pulsar spindown rate of the aligned rotator is 23% larger than that of the orthogonal vacuum rotator; (2) only 60% of the magnetic flux that crosses the light cylinder opens up to infinity; (3) the electric current closes along the other 40%, which gradually converges to the equator; (4) this transfers 40% of the total pulsar spindown energy flux in the equatorial current sheet, which is then dissipated in the acceleration of particles and in high-energy electromagnetic radiation; and (5) there is no separatrix current layer. Our solution is a minimum free-parameter solution in that the equatorial current layer is electrostatically supported against collapse and thus does not require a thermal particle population. In this respect, it is one more step toward the development of a new standard solution. We discuss the implications for intermittent pulsars and long-duration gamma-ray bursts. We conclude that the physical conditions in the equatorial current layer determine the global structure of the pulsar magnetosphere.

  14. Diversification and Challenges of Software Engineering Standards

    Poon, Peter T.

    1994-01-01

    The author poses certain questions in this paper: 'In the future, should there be just one software engineering standards set? If so, how can we work towards that goal? What are the challenges of internationalizing standards?' Based on the author's personal view, the statement of his position is as follows: 'There should NOT be just one set of software engineering standards in the future. At the same time, there should NOT be the proliferation of standards, and the number of sets of standards should be kept to a minimum.It is important to understand the diversification of the areas which are spanned by the software engineering standards.' The author goes on to describe the diversification of processes, the diversification in the national and international character of standards organizations, the diversification of the professional organizations producing standards, the diversification of the types of businesses and industries, and the challenges of internationalizing standards.

  15. 1998 federal technical standards workshop: Proceedings

    NONE

    1998-10-01

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  16. The ANS mathematics and computation software standards

    Smetana, A. O. [Savannah River National Laboratory, Washington Savannah River Company, Aiken, SC 29808 (United States)

    2006-07-01

    The Mathematics and Computations Div. of the American Nuclear Society sponsors the ANS-10 Standards Subcommittee. This subcommittee, which is part of the ANS Standards Committee, currently maintains three ANSI/ANS software standards. These standards are: Portability of Scientific and Engineering Software, ANS-10.2; Guidelines for the Verification and Validation of Scientific and Engineering Computer Programs for the Nuclear Industry, ANS-10.4; and Accommodating User Needs in Scientific and Engineering Computer Software Development, ANS-10.5. A fourth Standard, Documentation of Computer Software, ANS-10.3, is available as a historical Standard. (authors)

  17. Activity and gamma-ray emission standards

    Debertin, K.

    1983-01-01

    The standards made available by PTB are standards defined with regard to their activity A. If standard and measuring sample do not contain the same nuclide, the comparison with the standard is made via the emission rate R of the photons of a given energy. For this comparison, the value recommended by PTB for PTB standards should be used, as this value in many cases has been derived by emission rate measurements on specimens whose activity has been directly correlated with the activity of the standards released. (orig./DG) [de

  18. Implementing Home Health Standards in Clinical Practice.

    Gorski, Lisa A

    2016-02-01

    In 1986, the American Nurses Association (ANA) published the first Standards of Home Health Practice. Revised in 1992 and expanded in 1999 to become Home Health Nursing: Scope and Standards of Practice, it was revised in 2008 and again in 2014. In the 2014 edition, there are 6 standards of home healthcare nursing practice and 10 standards of professional performance for home healthcare nursing. The focus of this article is to describe the home healthcare standards and to provide guidance for implementation in clinical practice. It is strongly encouraged that home healthcare administrators, educators, and staff obtain a copy of the standards and fully read this essential home healthcare resource.

  19. Memorandum on standards for environmental hygiene 1976

    1978-01-01

    This report from the Dutch Ministry of Health is an advisory document on the influence of the memorandum on Standards for Environmental Hygiene 1976. It is a result of discussions between the Committee for Radiation Hygiene and the Commission for Toxicology. The environmental hygiene standards are defined and the difference between 150 standards and legal standards explained. Comments are given on the concepts that the memorandum covers and advice is given on the enforcement of such standards. This document deals with air and surface water pollution, radiation effects and toxicological standards. The difficulty in fixing maximum permissible doses for specific damaging agents is discussed. (C.F.)

  20. National standards for the nuclear industry

    Laing, W.R.; Corbin, L.T.

    1981-01-01

    Standards needs for the nuclear industry are being met by a number of voluntary organizations, such as ANS, ASTM, AWS, ASME, and IEEE. The American National Standards Institute (ANSI) coordinates these activities and approves completed standards as American National Standards. ASTM has two all-nuclear committees, E-10 and C-26. A C-26 subcommittee, Test Methods, has been active in writing analytical chemistry standards for twelve years. Thirteen have been approved as ANSI standards and others are ready for ballot. Work is continuing in all areas of the nuclear fuel cycle

  1. Status of the IAEA safety standards programme

    2002-01-01

    This presentation describes the status of the IAEA safety standards program to May 2002. The safety standards program overcome whole main nuclear implementations as General safety, Nuclear safety, Radiation safety, Radioactive waste safety, and Transport safety. Throughout this report the first column provides the list of published IAEA Safety Standards. The second gives the working identification number (DS) of standards being developed or revised. The bold type indicates standard issued under the authority the Board of Governors, others are issued under authority of the Director General. The last column provides the list of Committees, the first Committee listed has the lead in the preparation and review of the particular standard

  2. The ANS mathematics and computation software standards

    Smetana, A. O.

    2006-01-01

    The Mathematics and Computations Div. of the American Nuclear Society sponsors the ANS-10 Standards Subcommittee. This subcommittee, which is part of the ANS Standards Committee, currently maintains three ANSI/ANS software standards. These standards are: Portability of Scientific and Engineering Software, ANS-10.2; Guidelines for the Verification and Validation of Scientific and Engineering Computer Programs for the Nuclear Industry, ANS-10.4; and Accommodating User Needs in Scientific and Engineering Computer Software Development, ANS-10.5. A fourth Standard, Documentation of Computer Software, ANS-10.3, is available as a historical Standard. (authors)

  3. Survey of standards for electronic image displays

    Rowe, William A.

    1996-02-01

    Electronic visual displays have been evolving from the 1960's basis of cathode ray tube (CRT) technology. Now, many other technologies are also available, including both flat panels and projection displays. Standards for these displays are being developed at both the national level and the international levels. Standards activity within the United States is in its infancy and is fragmented according to the inclination of each of the standards developing organizations. The latest round of flat panel display technology was primarily developed in Japan. Initially standards arose from component vendor-to-OEM customer relationships. As a result, Japanese standards for components are the best developed. The Electronics Industries Association of Japan (EIAJ) is providing their standards to the International Electrotechnical Commission (IEC) for adoption. On the international level, professional societies such as the human factors society (hfs) and the International Organization for Standardization (ISO) have completed major standards, hfs developed the first ergonomic standard hfs-100 and the ISO has developed some sections of a broader ergonomic standard ISO 9241. This paper addresses the organization of standards activity. Active organizations and their areas of focus are identified. The major standards that have been completed or are in development are described. Finally, suggestions for improving the this standards activity are proposed.

  4. Russian seismic standards and demands for equipment and their conformity with international standards

    Kaznovsky, S.; Ostretsov, I.

    1993-01-01

    The principle regulations of standard documents concerning seismic safety of NPPs and demands for reactor equipment conformity with international standards are presented in this report. General state of NPP safety standards is reviewed, with a special emphasis on the state of seismic design standards for NPP equipment and piping. Russian standards documents on seismic resistance of NPPs and requirements are compared to international ones

  5. 47 CFR 90.379 - ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard).

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard... Communications Service (dsrcs) § 90.379 ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard). Roadside Units... incorporated by reference: American Society for Testing and Materials (ASTM) E2213-03, “Standard Specification...

  6. Generation of gaseous tritium standards

    Hohorst, F.A.

    1994-09-01

    The determination of aqueous and non-aqueous tritium in gaseous samples is one type of determination often requested of radioanalytical laboratories. This determination can be made by introducing the sample as a gas into a sampling train containing two silica gel beds separated by.a catalytic oxidizer bed. The first bed traps tritiated water. The sample then passes into and through the oxidizer bed where non-aqueous tritium containing species are oxidized to water and other products of combustion. The second silica gel bed then traps the newly formed tritiated water. Subsequently, silica gel is removed to plastic bottles, deionized water is added, and the mixture is permitted to equilibrate. The tritium content of the equilibrium mixture is then determined by conventional liquid scintillation counting (LSC). For many years, the moisture content of inert, gaseous samples has been determined using monitors which quantitatively electrolyze the moisture present after that moisture has been absorbed by phosphorous pentoxide or other absorbents. The electrochemical reaction is quantitative and definitive, and the energy consumed during electrolysis forms the basis of the continuous display of the moisture present. This report discusses the experimental evaluation of such a monitor as the basis for a technique for conversion of small quantities of SRMs of tritiated water ( 3 HOH) into gaseous tritium standards ( 3 HH)

  7. Establishing the isolated Standard Model

    Wells, James D.; Zhang, Zhengkang [Michigan Univ., Ann Arbor, MI (United States). Michigan Center for Theoretical Physics; Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Zhao, Yue [Michigan Univ., Ann Arbor, MI (United States). Michigan Center for Theoretical Physics

    2017-02-15

    The goal of this article is to initiate a discussion on what it takes to claim ''there is no new physics at the weak scale,'' namely that the Standard Model (SM) is ''isolated.'' The lack of discovery of beyond the SM (BSM) physics suggests that this may be the case. But to truly establish this statement requires proving all ''connected'' BSM theories are false, which presents a significant challenge. We propose a general approach to quantitatively assess the current status and future prospects of establishing the isolated SM (ISM), which we give a reasonable definition of. We consider broad elements of BSM theories, and show many examples where current experimental results are not sufficient to verify the ISM. In some cases, there is a clear roadmap for the future experimental program, which we outline, while in other cases, further efforts - both theoretical and experimental - are needed in order to robustly claim the establishment of the ISM in the absence of new physics discoveries.

  8. Experiments beyond the standard model

    Perl, M.L.

    1984-09-01

    This paper is based upon lectures in which I have described and explored the ways in which experimenters can try to find answers, or at least clues toward answers, to some of the fundamental questions of elementary particle physics. All of these experimental techniques and directions have been discussed fully in other papers, for example: searches for heavy charged leptons, tests of quantum chromodynamics, searches for Higgs particles, searches for particles predicted by supersymmetric theories, searches for particles predicted by technicolor theories, searches for proton decay, searches for neutrino oscillations, monopole searches, studies of low transfer momentum hadron physics at very high energies, and elementary particle studies using cosmic rays. Each of these subjects requires several lectures by itself to do justice to the large amount of experimental work and theoretical thought which has been devoted to these subjects. My approach in these tutorial lectures is to describe general ways to experiment beyond the standard model. I will use some of the topics listed to illustrate these general ways. Also, in these lectures I present some dreams and challenges about new techniques in experimental particle physics and accelerator technology, I call these Experimental Needs. 92 references

  9. Standard Technical Specifications, Westinghouse plants

    1992-09-01

    This NUREG contains improved Standard Technical Specifications (STS) for Westinghouse Plants and documents the positions of the Nuclear Regulatory Commission based on the Westinghouse Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. This document, Volume 3, contains the Bases for Sections 3.4--3.9 of the improved STS

  10. Standardized waste form test methods

    Slate, S.C.

    1984-11-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results is presented: The radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach tests methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transportation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance. 2 references, 2 figures

  11. Standard Technical Specifications, Westinghouse Plants

    1992-09-01

    This NUREG contains improved Standard Technical Specifications (STS) for Westinghouse Plants and documents the positions of the Nuclear Regulatory Commission based on the Westinghouse Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the unproved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS which contain information on safety limits, reactivity control systems, power distribution limits, and instrumentation

  12. NASA Occupant Protection Standards Development

    Somers, Jeffrey; Gernhardt, Michael; Lawrence, Charles

    2012-01-01

    Historically, spacecraft landing systems have been tested with human volunteers, because analytical methods for estimating injury risk were insufficient. These tests were conducted with flight-like suits and seats to verify the safety of the landing systems. Currently, NASA uses the Brinkley Dynamic Response Index to estimate injury risk, although applying it to the NASA environment has drawbacks: (1) Does not indicate severity or anatomical location of injury (2) Unclear if model applies to NASA applications. Because of these limitations, a new validated, analytical approach was desired. Leveraging off of the current state of the art in automotive safety and racing, a new approach was developed. The approach has several aspects: (1) Define the acceptable level of injury risk by injury severity (2) Determine the appropriate human surrogate for testing and modeling (3) Mine existing human injury data to determine appropriate Injury Assessment Reference Values (IARV). (4) Rigorously Validate the IARVs with sub-injurious human testing (5) Use validated IARVs to update standards and vehicle requirement

  13. Standardized waste form test methods

    Slate, S.C.

    1984-01-01

    The Materials Characterization Center (MCC) is developing standard tests to characterize nuclear waste forms. Development of the first thirteen tests was originally initiated to provide data to compare different high-level waste (HLW) forms and to characterize their basic performance. The current status of the first thirteen MCC tests and some sample test results are presented: the radiation stability tests (MCC-6 and 12) and the tensile-strength test (MCC-11) are approved; the static leach tests (MCC-1, 2, and 3) are being reviewed for full approval; the thermal stability (MCC-7) and microstructure evaluation (MCC-13) methods are being considered for the first time; and the flowing leach test methods (MCC-4 and 5), the gas generation methods (MCC-8 and 9), and the brittle fracture method (MCC-10) are indefinitely delayed. Sample static leach test data on the ARM-1 approved reference material are presented. Established tests and proposed new tests will be used to meet new testing needs. For waste form production, tests on stability and composition measurement are needed to provide data to ensure waste form quality. In transporation, data are needed to evaluate the effects of accidents on canisterized waste forms. The new MCC-15 accident test method and some data are presented. Compliance testing needs required by the recent draft repository waste acceptance specifications are described. These specifications will control waste form contents, processing, and performance

  14. Hardware standardization for embedded systems

    Sharma, M.K.; Kalra, Mohit; Patil, M.B.; Mohanty, Ashutos; Ganesh, G.; Biswas, B.B.

    2010-01-01

    Reactor Control Division (RCnD) has been one of the main designers of safety and safety related systems for power reactors. These systems have been built using in-house developed hardware. Since the present set of hardware was designed long ago, a need was felt to design a new family of hardware boards. A Working Group on Electronics Hardware Standardization (WG-EHS) was formed with an objective to develop a family of boards, which is general purpose enough to meet the requirements of the system designers/end users. RCnD undertook the responsibility of design, fabrication and testing of boards for embedded systems. VME and a proprietary I/O bus were selected as the two system buses. The boards have been designed based on present day technology and components. The intelligence of these boards has been implemented on FPGA/CPLD using VHDL. This paper outlines the various boards that have been developed with a brief description. (author)

  15. Standard Technical Specifications, Westinghouse plants

    1992-09-01

    This NUREG contains improved Standard Technical Specifications (STS) for Westinghouse Plants and documents the positions of the Nuclear Regulatory Commission based on the Westinghouse Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. This document, Volume 1, contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS

  16. 18 CFR 415.42 - Technical standards.

    2010-04-01

    ...) Standards used by state and local governments shall conform in principle to Commission standards but may.... Any significant difference shall be reviewed with and subject to approval by the Executive Director...

  17. Who Recognises Technical Standards in TTIP?

    K.P. Purnhagen (Kai)

    2017-01-01

    textabstractCurrent political discussions on the relationship of technical standards to the Transatlantic, Trade and Investment Partnership (TTIP) concern the question whether TTIP can provide a transatlantic level playing field for technical standards, and whether this will negatively affect

  18. Who recognises technical standards in TTIP?

    Purnhagen, K.

    2018-01-01

    Current political discussions on the relationship of technical standards to the Transatlantic, Trade and Investment Partnership (TTIP) concern the question whether TTIP can provide a transatlantic level playing field for technical standards, and whether this will negatively affect technical

  19. Spatial data content standards for Africa

    Cooper, Antony K

    2005-11-01

    Full Text Available , they selected 14 standards containing data dictionaries or feature catalogues, and compared their feature types. They have also provided some advice and recommendations on data content standards (particularly for data dictionaries and feature catalogues...

  20. Atomic frequency-time-length standards

    Gheorghiu, O.C.; Mandache, C.

    1987-01-01

    The principles of operative of atomic frequency-time-length standards and their principle characteristics are described. The role of quartz crystal oscillators which are sloved to active or passive standards is presented. (authors)

  1. Nuclear standards: current issues and future trends

    Landis, J.W.

    1985-01-01

    A summary of the important issues that currently face the nuclear standards field is presented and a discussion of how each of these issues is being resolved is given. The economic benefits that properly developed standards produce are listed

  2. Grid Standards and Codes | Grid Modernization | NREL

    photovoltaics (PV) adoption have given a sense of urgency to the standards development process. The Accelerating Systems Integration Standards team is addressing this urgency by providing leadership and direction for

  3. Radioactive standards type EK. Radioaktivni etalony EK

    1978-01-01

    The standard gives the terminology and data on accuracy, properties, uses and technical parameters of EK type standards with radionuclides /sup 3/H and /sup 14/C. Also given are conditions for testing, packing, transportation and storage.

  4. Current and future neutron radiography standards

    Brenizer, J.S.

    1999-01-01

    Only two organizations are actively producing standards which are used in neutron radiology (NR): the American Society of Testing and Materials (ASTM) and the International Organization for Standardization (ISO). Six ASTM standards exist that address the neutron radiography method. Two of the ASTM standards have been extensively used world-wide. ISO has a working group which is developing three standards that also address the neutron radiography method. Two of these are currently making their way through the ISO approval system. No ASTM or ISO standards exist for the neutron radioscopic method. Future ASTM standards will address the neutron radioscopic method and neutron radiologic system characterization. It is expected that similar efforts will be undertaken in ISO. Given the relatively small community providing neutron radiologic services, international cooperation and the need for ISO standards will most likely continue to grow.(author)

  5. New and revised standards for coke production

    G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15

    The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

  6. Optimization and standardization of pavement management processes.

    2004-08-01

    This report addresses issues related to optimization and standardization of current pavement management processes in Kentucky. Historical pavement management records were analyzed, which indicates that standardization is necessary in future pavement ...

  7. New ISO standard - personnel photographic film dosemeters

    Brabec, D.

    1980-01-01

    The ISO Standard 1757 ''Personnel Photographic Film Dosemeters'', issued in June 1980, is briefly described. UVVVR's own dosemeter developed for use in the national film dosimetry service in Czechoslovakia is evaluated in relation to this ISO Standard. (author)

  8. National Water Quality Standards Database (NWQSD)

    U.S. Environmental Protection Agency — The National Water Quality Standards Database (WQSDB) provides access to EPA and state water quality standards (WQS) information in text, tables, and maps. This data...

  9. International Financial Reporting Standards and differential reporting

    Jarvis, Robin; Collis, Jill

    2003-01-01

    This paper examines the international development of financial reporting standards for smaller entities from a UK perspective. It examines the three elements of differential reporting: abbreviated accounts, the Financial Reporting Standard for Smaller Entities and exemption from the statutory audit.

  10. The reinterpretation of standard deviation concept

    Ye, Xiaoming

    2017-01-01

    Existing mathematical theory interprets the concept of standard deviation as the dispersion degree. Therefore, in measurement theory, both uncertainty concept and precision concept, which are expressed with standard deviation or times standard deviation, are also defined as the dispersion of measurement result, so that the concept logic is tangled. Through comparative analysis of the standard deviation concept and re-interpreting the measurement error evaluation principle, this paper points o...

  11. Development of a quantitative risk standard

    Temme, M.I.

    1982-01-01

    IEEE Working Group SC-5.4 is developing a quantitative risk standard for LWR plant design and operation. The paper describes the Working Group's conclusions on significant issues, including the scope of the standard, the need to define the process (i.e., PRA calculation) for meeting risk criteria, the need for PRA quality requirements and the importance of distinguishing standards from goals. The paper also describes the Working Group's approach to writing this standard

  12. 1996 DOE technical standards program workshop: Proceedings

    NONE

    1996-07-01

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  13. Status of conversion of DOE standards to non-Government standards

    Moseley, H.L.

    1992-07-01

    One major goal of the DOE Technical Standards Program is to convert existing DOE standards into non-Government standards (NGS's) where possible. This means that a DOE standard may form the basis for a standards-writing committee to produce a standard in the same subject area using the non-Government standards consensus process. This report is a summary of the activities that have evolved to effect conversion of DOE standards to NGSs, and the status of current conversion activities. In some cases, all requirements in a DOE standard will not be incorporated into the published non-Government standard because these requirements may be considered too restrictive or too specific for broader application by private industry. If requirements in a DOE standard are not incorporated in a non-Government standard and the requirements are considered necessary for DOE program applications, the DOE standard will be revised and issued as a supplement to the non-Government standard. The DOE standard will contain only those necessary requirements not reflected by the non-Government standard. Therefore, while complete conversion of DOE standards may not always be realized, the Department's technical standards policy as stated in Order 1300.2A has been fully supported in attempting to make maximum use of the non-Government standard.

  14. Status of conversion of DOE standards to non-Government standards

    Moseley, H.L.

    1992-07-01

    One major goal of the DOE Technical Standards Program is to convert existing DOE standards into non-Government standards (NGS`s) where possible. This means that a DOE standard may form the basis for a standards-writing committee to produce a standard in the same subject area using the non-Government standards consensus process. This report is a summary of the activities that have evolved to effect conversion of DOE standards to NGSs, and the status of current conversion activities. In some cases, all requirements in a DOE standard will not be incorporated into the published non-Government standard because these requirements may be considered too restrictive or too specific for broader application by private industry. If requirements in a DOE standard are not incorporated in a non-Government standard and the requirements are considered necessary for DOE program applications, the DOE standard will be revised and issued as a supplement to the non-Government standard. The DOE standard will contain only those necessary requirements not reflected by the non-Government standard. Therefore, while complete conversion of DOE standards may not always be realized, the Department`s technical standards policy as stated in Order 1300.2A has been fully supported in attempting to make maximum use of the non-Government standard.

  15. Building Standards and Codes for Energy Conservation

    Gross, James G.; Pierlert, James H.

    1977-01-01

    Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

  16. Standards for Education Reporters: Skills, Knowledge, Ethics

    Graves, Bill

    2002-01-01

    Experienced school reporters know plenty about standards. The struggle to set standards that define what students should know and be able to do at various stages of their education has been at the heart of school reform since the late 1980s. So if journalists are going to understand the value of standards, it will be those covering schools. It is…

  17. 76 FR 16277 - System Restoration Reliability Standards

    2011-03-23

    ... electric system. Blackstart units are essential to restart generation and restore power to the grid in the... Standard EOP-007-0. \\2\\ Mandatory Reliability Standards for the Bulk-Power System, Order No. 693, 72 FR... = $5,894,624. Title: Mandatory Reliability Standards for the Bulk-Power System. Action: FERC 725A...

  18. 42 CFR 493.1101 - Standard: Facilities.

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Facilities. 493.1101 Section 493.1101... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Facility Administration for Nonwaived Testing § 493.1101 Standard: Facilities. (a) The laboratory must be constructed, arranged, and maintained to...

  19. 40 CFR 61.345 - Standards: Containers.

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standards: Containers. 61.345 Section... Operations § 61.345 Standards: Containers. (a) The owner or operator shall meet the following standards for each container in which waste is placed in accordance with § 61.342(c)(1)(ii) of this subpart: (1) The...

  20. 40 CFR 265.1087 - Standards: Containers.

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Standards: Containers. 265.1087... DISPOSAL FACILITIES Air Emission Standards for Tanks, Surface Impoundments, and Containers § 265.1087 Standards: Containers. (a) The provisions of this section apply to the control of air pollutant emissions...