WorldWideScience

Sample records for standard control design

  1. The System 80+ Standard Plant design control document. Volume 20

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains 2 technical specifications bases as part of Appendix 16 A Tech Spec Bases. They are TS B3.8 Electrical Power Technical Systems Bases and TS B3.9 Refueling Operations Bases. All 3 parts of section 17 (QA) and all 10 parts of section 18 (Human Factors) of the ADM Design and Analysis are contained in this volume. Topics covered in section 17 are: design phase QA; operations phase QA; and design phase reliability assurance. Topics covered by section 18 are: design team organization; design goals; design process; functional task analysis; control room configuration; information presentation; control and monitoring; verification and validation; and review documents

  2. The System 80+ Standard Plant design control document. Volume 23

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains part 16 References and Appendix 19 A Design Alternatives for section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Also covered is section 20 Unresolved Safety Issues of the ADM Design and Analysis. Finally sections 1--6 of the ADM Emergency Operations Guidelines are contained in this volume. Information covered in these sections include: standard post-trip actions; diagnostic actions; reactor trip recovery guideline; LOCA recovery; SG tube rupture recovery

  3. The System 80+ Standard Plant design control document. Volume 11

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume covers parts 6 and 7 and appendix 7A for section 7 (Instrumentation and Control) of the ADM Design and Analysis. The topics covered by these are: other systems required for safety; control systems not required by safety; and CMF evaluation of limiting faults. Parts 1--3 of section 8 (Electric Power) of the ADM are also included in this volume. Topics covered by these parts are: introduction; offsite power system; and onsite power system

  4. The System 80+ Standard Plant design control document. Volume 16

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all 3 parts of section 14 (Initial Test Program) of the ADM Design and Analysis. Topics covered are: PSAR information; FSAR information; certified design material. Also part 1 of section 15 (Accident Analysis) of the ADM Design and Analysis is included in this volume. The topic of part 1 is increase in heat removal

  5. The System 80+ Standard Plant design control document. Volume 15

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all five parts of section 12 (Radiation Protection) of the ADM Design and Analysis. Topics covered are: ALARA exposures; radiation sources; radiation protection; dose assessment; and health physics program. All six parts and appendices A and B for section 13 (Conduct of Operations) of the ADM Design and Analysis are also contained in this volume. Topics covered are: organizational structure; training program; emergency planning; review and audit; plant procedures; industrial security; sabotage protection (App 13A); and vital equipment list (App 13B)

  6. The System 80+ Standard Plant design control document. Volume 21

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 1--10 of section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Topics covered are: methodology; initiating event evaluation; accident sequence determination; data analysis; systems analysis; external events analysis; shutdown risk assessment; accident sequence quantification; and sensitivity analysis. Also included in this volume are Appendix 19.8A Shutdown Risk Assessment and Appendix A to Appendix 19.8A Request for Information

  7. The System 80+ Standard Plant design control document. Volume 24

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains sections 7--11 of the ADM Emergency Operations Guidelines. Topics covered are: excess steam demand recovery; loss of all feedwater; loss of offsite power; station blackout recovery; and functional recovery guideline. Appendix A Severe Accident Management Guidelines and Appendix B Lower Mode Operational Guidelines are also included

  8. Design and analysis of control charts for standard deviation with estimated parameters

    NARCIS (Netherlands)

    Schoonhoven, M.; Riaz, M.; Does, R.J.M.M.

    2011-01-01

    This paper concerns the design and analysis of the standard deviation control chart with estimated limits. We consider an extensive range of statistics to estimate the in-control standard deviation (Phase I) and design the control chart for real-time process monitoring (Phase II) by determining the

  9. Standards and the design of the Advanced Photon Source control system

    International Nuclear Information System (INIS)

    McDowell, W.P.; Knott, M.J.; Lenkszus, F.R.; Kraimer, M.R.; Daly, R.T.; Arnold, N.D.; Anderson, M.D.; Anderson, J.B.; Zieman, R.C.; Cha, Ben-Chin K.; Vong, F.C.; Nawrocki, G.J.; Gunderson, G.R.; Karonis, N.T.; Winans, J.R.

    1991-01-01

    The Advanced Photon Source (APS), now under construction at Argonne National Laboratory is a 7 GeV positron storage ring dedicated to research facilities using synchrotron radiation. This ring, along with its injection accelerators is to be controlled and monitored with a single, flexible, and expandable control system. In the conceptual stage the control system design group faced the challenges that face all control system designers: to force the machine designers to quantify and codify the system requirements, to protect the investment in hardware and software from rapid obsolescence, and to find methods of quickly incorporating new generations of equipment and replace of obsolete equipment without disrupting the exiting system. To solve these and related problems, the APS control system group made an early resolution to use standards in the design of the system. This paper will cover the present status of the APS control system as well as discuss the design decisions which led us to use industrial standards and collaborations with other laboratories whenever possible to develop a control system. It will explain the APS control system and illustrate how the use of standards has allowed APS to design a control system whose implementation addresses these issues. The system will use high performance graphic workstations using an X-Windows Graphical User Interface at the operator interface level. It connects to VME-based microprocessors at the field level using TCP/IP protocols over high performance networks. This strategy assures the flexibility and expansibility of the control system. A defined interface between the system components will allow the system to evolve with the direct addition of future, improved equipment and new capabilities

  10. User's design handbook for a Standardized Control Module (SCM) for DC to DC Converters, volume 2

    Science.gov (United States)

    Lee, F. C.

    1980-01-01

    A unified design procedure is presented for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt. All key results and performance indices, for buck, boost, and buck/boost switching regulators which are relevant to SCM design considerations are included to facilitate frequent references.

  11. USAGE OF STANDARD PERSONAL COMPUTER PORTS FOR DESIGNING OF THE DOUBLE REDUNDANT FAULT-TOLERANT COMPUTER CONTROL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Rafig SAMEDOV

    2005-01-01

    Full Text Available In this study, for designing of the fault-tolerant control systems by using standard personal computers, the ports have been investigated, different structure versions have been designed and the method for choosing of an optimal structure has been suggested. In this scope, first of all, the ÇİFTYAK system has been defined and its work principle has been determined. Then, data transmission ports of the standard personal computers have been classified and analyzed. After that, the structure versions have been designed and evaluated according to the used data transmission methods, the numbers of ports and the criterions of reliability, performance, truth, control and cost. Finally, the method for choosing of the most optimal structure version has been suggested.

  12. Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 The purpose of this practice is to provide design and construction guidelines for contamination controlled facilities used in the assembly and integration of aerospace hardware. The guidelines herein are intended to ensure that the facilities, when used properly, will meet the cleanliness requirements of aerospace hardware and processes. The objective is to limit contamination due to the deposition of particulate and molecular contaminants on flight hardware surfaces. 1.2 One cleanliness classification of a facility is the airborne particle concentrations in accordance with ISO 14644-1 and 14644-2. Airborne particle concentrations in accordance with FED-STD-209E are included for reference. This simple classification is inadequate to describe a facility that will support the assembly and integration of spacecraft. The extended duration of hardware exposure during fabrication and testing, the sensitivity of the hardware to hydrocarbons and other molecular contaminants, and the changing requirements during ...

  13. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 8 provides a description of instrumentation and controls

  14. Recipe Development Process Re-Design with ANSI/ISA-88 Batch Control Standard in the Pharmaceutical Industry

    Directory of Open Access Journals (Sweden)

    Margherita De Minicis

    2014-11-01

    which must be appropriately shared among local laboratories and plants. To this extent, the ANSI/ISA-88 batch manufacturing standard, rising in the context of process control and automation, is rapidly becoming widely used in pharmaceutical companies. This paper presents a step-by-step approach to assessing the compliance to the ANSI/ISA-88 standard along with a BPM-oriented methodology applicable to the re-design of any generic recipe development process. Redesigning a recipe development process is a complex activity and can mask several pitfalls and criticalities. Thus, along with the methodology, some general evidence and suggestions are provided based on the experience of a project carried out in a large multinational pharmaceutical company.

  15. Design of Fuzzy Controllers

    DEFF Research Database (Denmark)

    Jantzen, Jan

    1998-01-01

    Design of a fuzzy controller requires more design decisions than usual, for example regarding rule base, inference engine, defuzzification, and data pre- and post processing. This tutorial paper identifies and describes the design choices related to single-loop fuzzy control, based on an internat...... on an international standard which is underway. The paper contains also a design approach, which uses a PID controller as a starting point. A design engineer can view the paper as an introduction to fuzzy controller design.......Design of a fuzzy controller requires more design decisions than usual, for example regarding rule base, inference engine, defuzzification, and data pre- and post processing. This tutorial paper identifies and describes the design choices related to single-loop fuzzy control, based...

  16. DOE standard: Radiological control

    International Nuclear Information System (INIS)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ''Occupational Radiation Protection''. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835

  17. DOE standard: Radiological control

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  18. System 80+trademark Standard Design: CESSAR design certification. Volume 8

    International Nuclear Information System (INIS)

    1997-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume contains Chapter 7 -- Instrumentation and Controls. Topics covered are: reactor protection system; engineered safety feature actuation systems; systems required for safe shutdown; safety-related display instrumentation; all other instrumentation for safety; and control systems not required for safety. Appendix 7A is included

  19. "Every Child Counts": Testing Policy Effectiveness Using a Randomised Controlled Trial, Designed, Conducted and Reported to CONSORT Standards

    Science.gov (United States)

    Torgerson, Carole; Wiggins, Andy; Torgerson, David; Ainsworth, Hannah; Hewitt, Catherine

    2013-01-01

    We report a randomised controlled trial evaluation of an intensive one-to-one numeracy programme--"Numbers Count"--which formed part of the previous government's numeracy policy intervention--"Every Child Counts." We rigorously designed and conducted the trial to CONSORT guidelines. We used a pragmatic waiting list design to…

  20. MAN-004 Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Timothy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-07-01

    At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire

  1. BioWes-from design of experiment, through protocol to repository, control, standardization and back-tracking.

    Science.gov (United States)

    Cisar, Petr; Soloviov, Dmytro; Barta, Antonin; Urban, Jan; Stys, Dalibor

    2016-07-15

    One of the main challenges in modern science is the amount of data produced by the experimental work; it is difficult to store, organize and share the scientific data and to extract the wealth of knowledge. Experimental method descriptions in scientific publications are often incomplete, which complicates experimental reproducibility. The proposed system was created in order to address these issues. It provides a solution for management of the experimental data and metadata to support the reproducibility. The system is implemented as a repository for experiment descriptions and experimental data. It has three main entry points: desktop application for protocol design and data processing, web interface dedicated for protocol and data management, and web-based interface for mobile devices suitable for the field experiments. The functionality of desktop client can be extended using the custom plug-ins for data extraction and data processing. The system provides several methods to support experimental reproducibility: standardized terminology support, data and metadata at a single location, standardized protocol design or protocol evolution. The system was tested in the framework of international infrastructure project AQUAEXCEL with five pilot installations at different institutes. The general testing in Tissue culture certified laboratory, Institute of complex systems and IFREMER verified the usability under different research infrastructures. The specific testing focused on the data processing modules and plug-ins demonstrated the modularity of the system for the specific conditions. The BioWes system represents experimental data as black box and therefore can handle any data type so as to provide broad usability for a variety of experiments and provide the data management infrastructure to improve the reproducibility and data sharing. The proposed system provides the tools for standard data management operations and extends the support by the standardization

  2. International Electrotechnical Commission standards and French material control standards

    International Nuclear Information System (INIS)

    Furet, J.; Weill, J.

    1978-01-01

    There are reported the international standards incorporated into the IEC Subcommitee 45 A (Nuclear Reactor Instrumentation) and the national standards elaborated by the Commissariat a l'Energie Atomique, CEA, Group of normalized control equipment, the degree of application of those being reported on the base design, call of bids and exploitation of nuclear power plants. (J.E. de C)

  3. Radiological Control Technician: Standardized technician Qualification Standard

    International Nuclear Information System (INIS)

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  4. Seismic design standardization of nuclear facilities

    International Nuclear Information System (INIS)

    Reddy, G.R.; Vaze, K.K.

    2011-01-01

    Full text: Structures, Systems and Components (SSCs) of Nuclear Facilities have to be designed for normal operating loads such as dead weight, pressure, temperature etc., and accidental loads such as earthquakes, floods, extreme, wind air craft impact, explosions etc. Man made accidents such as aircraft impact, explosions etc., some times may be considered as design basis event and some times taken care by providing administrative controls. This will not be possible in the case of natural events such as earthquakes, flooding, extreme winds etc. Among natural events earthquakes are considered as most devastating and need to be considered as design basis event. It is generally felt design of SSCs for earthquake loads is very time consuming and expensive. Conventional seismic design approaches demands for large number of supports for systems and components. This results in large space occupation and in turn creates difficulties for maintenance and in service inspection of systems and components. In addition, complete exercise of design need to be repeated for plants being located at different sites due to different seismic demands. However, advanced seismic response control methods will help to standardize the seismic design meeting the safety and economy. These methods adopt passive, semi active and active devices, and base isolators to control the seismic response. In nuclear industry, it is advisable to go for passive devices to control the seismic responses. Ideally speaking, these methods will make the designs made for normal loads can also satisfy the seismic demand without calling for change in material, geometry, layout etc. in the SSCs. This paper explain the basic ideas of seismic response control methods, demonstrate the effectiveness of control methods through case studies and eventually give the procedure to be adopted for seismic design standardization of nuclear facilities

  5. Radiation control standards and procedures

    Energy Technology Data Exchange (ETDEWEB)

    1956-12-14

    This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

  6. Electrical, instrumentation, and control codes and standards

    International Nuclear Information System (INIS)

    Kranning, A.N.

    1978-01-01

    During recent years numerous documents in the form of codes and standards have been developed and published to provide design, fabrication and construction rules and criteria applicable to instrumentation, control and power distribution facilities for nuclear power plants. The contents of this LTR were prepared by NUS Corporation under Subcontract K5108 and provide a consolidated index and listing of the documents selected for their application to procurement of materials and design of modifications and new construction at the LOFT facility. These codes and standards should be applied together with the National Electrical Code, the ID Engineering Standards and LOFT Specifications to all LOFT instrument and electrical design activities

  7. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process

  8. Tool coupling for the design and operation of building energy and control systems based on the Functional Mock-up Interface standard

    Energy Technology Data Exchange (ETDEWEB)

    Nouidui, Thierry Stephane; Wetter, Michael

    2014-03-01

    This paper describes software tools developed at the Lawrence Berkeley National Laboratory (LBNL) that can be coupled through the Functional Mock-up Interface standard in support of the design and operation of building energy and control systems. These tools have been developed to address the gaps and limitations encountered in legacy simulation tools. These tools were originally designed for the analysis of individual domains of buildings, and have been difficult to integrate with other tools for runtime data exchange. The coupling has been realized by use of the Functional Mock-up Interface for co-simulation, which standardizes an application programming interface for simulator interoperability that has been adopted in a variety of industrial domains. As a variety of coupling scenarios are possible, this paper provides users with guidance on what coupling may be best suited for their application. Furthermore, the paper illustrates how tools can be integrated into a building management system to support the operation of buildings. These tools may be a design model that is used for real-time performance monitoring, a fault detection and diagnostics algorithm, or a control sequence, each of which may be exported as a Functional Mock-up Unit and made available in a building management system as an input/output block. We anticipate that this capability can contribute to bridging the observed performance gap between design and operational energy use of buildings.

  9. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+ TM Standard Design

  10. Standardization of detector control systems

    International Nuclear Information System (INIS)

    Fukunaga, Chikara

    2000-01-01

    Current and future detectors for high-energy and/or nuclear physics experiments require highly intelligent detector control systems. In order to reduce resources, the construction of a standardized template for the control systems based on the commercially available superviser control and data acquisition (SCADA) system has been proposed. The possibility of constructing this template is discussed and several key issues for evaluation of SCADA as the basis for such a template are presented. (author)

  11. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management

  12. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems

  13. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 18 provides Appendix B, Probabilistic Risk Assessment

  14. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 17 provides Appendix A of this report, closure of unresolved and Genetic Safety Issues

  15. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report--Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This report, Volume 13, documents increase and decrease of reactor cooling system inventory and radioactive material release from a subsystem or component

  16. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  17. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

  18. Design and Analysis of an Attitude Determination and Control Subsystem (ADCS) for AFIT’s 6U Standard Bus

    Science.gov (United States)

    2014-03-27

    momentum vector (N-m-s) I 3 x 3 moment of inertia tensor (kg-m2) xiii Symbol Definition B 3 x 1 magnetic field vector (mG) N number of turns I current (A...ability to de-tumble spacecraft* 4. Test sun-pointing control mode 5. Demonstrate nadir -pointing control mode 6. Test inertial and body vector alignment 4...Figure 2.3, the z-axis (yaw) points in the direction of nadir , the y-axis (pitch) points in the direction of the negative orbit normal, and the x

  19. System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

  20. Assessment of a Standardized Pre-Operative Telephone Checklist Designed to Avoid Late Cancellation of Ambulatory Surgery: The AMBUPROG Multicenter Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Sonia Gaucher

    Full Text Available To assess the impact of a standardized pre-operative telephone checklist on the rate of late cancellations of ambulatory surgery (AMBUPROG trial.Multicenter, two-arm, parallel-group, open-label randomized controlled trial.11 university hospital ambulatory surgery units in Paris, France.Patients scheduled for ambulatory surgery and able to be reached by telephone.A 7-item checklist designed to prevent late cancellation, available in five languages and two versions (for children and adults, was administered between 7 and 3 days before the planned date of surgery, by an automated phone system or a research assistant. The control group received standard management alone.Rate of cancellation on the day of surgery or the day before.The study population comprised 3900 patients enrolled between November 2012 and September 2013: 1950 patients were randomized to the checklist arm and 1950 patients to the control arm. The checklist was administered to 68.8% of patients in the intervention arm, 1002 by the automated phone system and 340 by a research assistant. The rate of late cancellation did not differ significantly between the checklist and control arms (109 (5.6% vs. 113 (5.8%, adjusted odds ratio [95% confidence interval] = 0.91 [0.65-1.29], (p = 0.57. Checklist administration revealed that 355 patients (28.0% had not undergone tests ordered by the surgeon or anesthetist, and that 254 patients (20.0% still had questions concerning the fasting state.A standardized pre-operative telephone checklist did not avoid late cancellations of ambulatory surgery but enabled us to identify several frequent causes.ClinicalTrials.gov NCT01732159.

  1. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

  2. Effects of standard training in the use of closed-circuit televisions in visually impaired adults: design of a training protocol and a randomized controlled trial

    Science.gov (United States)

    2010-01-01

    Background Reading problems are frequently reported by visually impaired persons. A closed-circuit television (CCTV) can be helpful to maintain reading ability, however, it is difficult to learn how to use this device. In the Netherlands, an evidence-based rehabilitation program in the use of CCTVs was lacking. Therefore, a standard training protocol needed to be developed and tested in a randomized controlled trial (RCT) to provide an evidence-based training program in the use of this device. Methods/Design To develop a standard training program, information was collected by studying literature, observing training in the use of CCTVs, discussing the content of the training program with professionals and organizing focus and discussion groups. The effectiveness of the program was evaluated in an RCT, to obtain an evidence-based training program. Dutch patients (n = 122) were randomized into a treatment group: normal instructions from the supplier combined with training in the use of CCTVs, or into a control group: instructions from the supplier only. The effect of the training program was evaluated in terms of: change in reading ability (reading speed and reading comprehension), patients' skills to operate the CCTV, perceived (vision-related) quality of life and tasks performed in daily living. Discussion The development of the CCTV training protocol and the design of the RCT in the present study may serve as an example to obtain an evidence-based training program. The training program was adjusted to the needs and learning abilities of individual patients, however, for scientific reasons it might have been preferable to standardize the protocol further, in order to gain more comparable results. Trial registration http://www.trialregister.nl, identifier: NTR1031 PMID:20219120

  3. Feasibility study and uncertainties in the validation of an existing safety-related control circuit with the ISO 13849-1:2006 design standard

    International Nuclear Information System (INIS)

    Jocelyn, Sabrina; Baudoin, James; Chinniah, Yuvin; Charpentier, Philippe

    2014-01-01

    In industry, machine users and people who modify or integrate equipment often have to evaluate the safety level of a safety-related control circuit that they have not necessarily designed. The modifications or integrations may involve work to make an existing machine that does not comply with normative or regulatory specifications safe. However, how can a circuit performing a safety function be validated a posteriori? Is the validation exercise feasible? What are the difficulties and limitations of such a procedure? The aim of this article is to answer these questions by presenting a validation study of a safety function of an existing machine. A plastic injection molding machine is used for this study, as well as standard ISO 13849-1:2006. Validation consists of performing an a posteriori (post-design) estimation of the performance level of the safety function. The procedure is studied for two contexts of use of the machine: in industry, and in laboratory. The calculations required by the ISO standard were done using Excel, followed by SIStema software. It is shown that, based on the context of use, the estimated performance level was different for the same safety-related circuit. The variability in the results is explained by the assumptions made by the person undertaking the validation without the involvement of the machine designer. - Highlights: • Validation of the performance level of a safety function is undertaken. • An injection molding machine and ISO 13849-1:2006 standard are used for the procedure. • The procedure is undertaken for two contexts of use of the machine. • In this study, the performance level depends on the context of use. • The assumptions made throughout the study partially explain this difference

  4. Standards of Multimedia Graphic Design in Education

    Science.gov (United States)

    Aldalalah, Osamah Ahmad; Ababneh, Ziad Waleed Mohamed

    2015-01-01

    This study aims to determine Standards of Multimedia Graphic Design in Education through the analysis of the theoretical basis and previous studies related to this subject. This study has identified the list of standards of Multimedia, Graphic Design, each of which has a set indicator through which the quality of Multimedia can be evaluated in…

  5. State Skill Standards: Housing and Interior Design

    Science.gov (United States)

    Nevada Department of Education, 2008

    2008-01-01

    Meeting the Housing and Interior Design Standards will provide students with skills for personal family life and towards becoming a professional in the interior design field. The mission of Housing and Interior Design education is to prepare students for family life, work life, and careers in the fashion industry by creating opportunities to…

  6. System 80+trademark Standard Design: CESSAR design certification. Volume 25

    International Nuclear Information System (INIS)

    1997-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume contains sections 12 thru 16 of Chapter 19 -- Probabilistic Risk Assessment. Topics covered are: containment response analysis; consequence analysis; containment response and consequence analysis sensitivity analysis; summary and conclusions; and references

  7. DOE Standard: Fire protection design criteria

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    The development of this Standard reflects the fact that national consensus standards and other design criteria do not comprehensively or, in some cases, adequately address fire protection issues at DOE facilities. This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria. This Standard replaces certain mandatory fire protection requirements that were formerly in DOE 5480.7A, ``Fire Protection``, and DOE 6430.1A, ``General Design Criteria``. It also contains the fire protection guidelines from two (now canceled) draft standards: ``Glove Box Fire Protection`` and ``Filter Plenum Fire Protection``. (Note: This Standard does not supersede the requirements of DOE 5480.7A and DOE 6430.1A where these DOE Orders are currently applicable under existing contracts.) This Standard, along with the criteria delineated in Section 3, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  8. DOE Standard: Fire protection design criteria

    International Nuclear Information System (INIS)

    1999-07-01

    The development of this Standard reflects the fact that national consensus standards and other design criteria do not comprehensively or, in some cases, adequately address fire protection issues at DOE facilities. This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria. This Standard replaces certain mandatory fire protection requirements that were formerly in DOE 5480.7A, ''Fire Protection'', and DOE 6430.1A, ''General Design Criteria''. It also contains the fire protection guidelines from two (now canceled) draft standards: ''Glove Box Fire Protection'' and ''Filter Plenum Fire Protection''. (Note: This Standard does not supersede the requirements of DOE 5480.7A and DOE 6430.1A where these DOE Orders are currently applicable under existing contracts.) This Standard, along with the criteria delineated in Section 3, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities

  9. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  10. 77 FR 43196 - Minimum Internal Control Standards and Technical Standards

    Science.gov (United States)

    2012-07-24

    ... NATIONAL INDIAN GAMING COMMISSION 25 CFR Parts 543 and 547 Minimum Internal Control Standards [email protected] . SUPPLEMENTARY INFORMATION: Part 543 addresses minimum internal control standards (MICS) for Class II gaming operations. The regulations require tribes to establish controls and implement...

  11. Business School's Performance Management System Standards Design

    Science.gov (United States)

    Azis, Anton Mulyono; Simatupang, Togar M.; Wibisono, Dermawan; Basri, Mursyid Hasan

    2014-01-01

    This paper aims to compare various Performance Management Systems (PMS) for business school in order to find the strengths of each standard as inputs to design new model of PMS. There are many critical aspects and gaps notified for new model to improve performance and even recognized that self evaluation performance management is not well…

  12. Design Standards for School Art Facilities

    Science.gov (United States)

    National Art Education Association, 2015

    2015-01-01

    "Design Standards for School Art Facilities" is an invaluable resource for any school or school district looking to build new facilities for the visual arts or renovate existing ones. Discover detailed information about spaces for the breadth of media used in the visual arts. Photographs illustrate all types of features including…

  13. A Human Factors Design Verification on MMI and Control console of the ARM Prototype of the Korean Standard Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Oh, In Seok; Lee, Jung Woon; Lee, Yong Hee; Lee, Hyun Chul; Park, Jae Chang; Hwang, In Koo; Jang, Tong Il; Kim, Dae Ho; Hwang, Seong Hwan; Park, Jae Kyu

    2007-12-15

    In this study, a human factors evaluation was performed on the display and control panel design of AFHS (Advanced Fuel Handling System) for the SKN 3 and 4 units. In order to evaluate the HSI design, we set up an improvements strategy of the designed interfaces in consideration of the latest human factors guidelines such as NUREG-0700 Rev.2 and NUREG-0711. The evaluation was focused on appropriateness and suitability of the operating displays and control panel configuration of the system which is designed to be used in loading and unloading tasks of nuclear fuels in the reactor building. As the result of this evaluation, A set of HEDs (Human Engineering Discrepancies) to be changed were selected. Although those items were not significant problems in the aspect of human factors, they were determined to be resolved to enhance the operator's performance and convenience. KAERI suggested the design alternatives on those issue items to the designers and repeated the design-reviews on the design changes of interface elements. Through the review-and-change process, all the HEDs and HSI issues were resolved and adopted in the final design process.

  14. Pattern Recognition Control Design

    Science.gov (United States)

    Gambone, Elisabeth A.

    2018-01-01

    Spacecraft control algorithms must know the expected vehicle response to any command to the available control effectors, such as reaction thrusters or torque devices. Spacecraft control system design approaches have traditionally relied on the estimated vehicle mass properties to determine the desired force and moment, as well as knowledge of the effector performance to efficiently control the spacecraft. A pattern recognition approach was used to investigate the relationship between the control effector commands and spacecraft responses. Instead of supplying the approximated vehicle properties and the thruster performance characteristics, a database of information relating the thruster ring commands and the desired vehicle response was used for closed-loop control. A Monte Carlo simulation data set of the spacecraft dynamic response to effector commands was analyzed to establish the influence a command has on the behavior of the spacecraft. A tool developed at NASA Johnson Space Center to analyze flight dynamics Monte Carlo data sets through pattern recognition methods was used to perform this analysis. Once a comprehensive data set relating spacecraft responses with commands was established, it was used in place of traditional control methods and gains set. This pattern recognition approach was compared with traditional control algorithms to determine the potential benefits and uses.

  15. International standard for design basis threat (DBT)

    International Nuclear Information System (INIS)

    Blankenship, J.A.

    2002-01-01

    Full text: A design basis threat (DBT) has been used by the United States since the 1970's as a basis for the design of a facility physical protection system, a basis for the evaluation of the facility physical protection system, and as a standard against which to compare the continuously changing threat. In the last two years substantial effort has been made to develop an international standard for the development of a design basis threat. This approach is the result of a year's worth of discussions between the United States, Germany, United Kingdom, France, and most recently the Russian Federation. The International Atomic Energy Agency (IAEA) supported these discussions and the resulting process, which culminated in a three day workshop on the development of a state DBT. The IAEA was directly involved in this process due to the latest revision of INFCIRC 225, which recommends the use of a DBT in the state physical protection regime. This international standard for the development of a DBT is a significant milestone in the international community. This was necessary because Sandia National Laboratory had developed material for a 'DBT Workshop', and a standard, international approach had to be established before the workshop could be finalized and the instructional material provided to the IAEA for general use. This paper presents a summary of the new international approach to the creation and use of a design basis threat. The paper describes how a DBT is created within a state. This paper also explains the advantages and disadvantages of using this internationalized approach to the DBT. Each state may, of course, choose to modify their use of the DBT to better fit their culture, technical experience of the facilities and authorities, and strengths and weaknesses of their regulatory systems. The internationalized version of the creation and use of the DBT is a major milestone in the international effort of the United States and the IAEA, and this paper is a

  16. Approaching standard by designing a basic safety function

    OpenAIRE

    Baudoin , James; Bello , Jean-Paul

    2014-01-01

    This document is intended to guide designers to perform machinery control systems with only one or a few "basic safety functions such as emergency stop or movable guard.Among the available standards for machinery design, EN ISO 13849-1 is the one providing recommendations to design safety related parts of control systems (SRP/CS) implementing different types of energy such as electric, hydraulic or pneumatic.This document is based on the implementation of the simplified method of EN ISO 13849...

  17. Design controls for the medical device industry

    CERN Document Server

    Teixeira, Marie B

    2013-01-01

    The second edition of a bestseller, Design Controls for the Medical Device Industry provides a comprehensive review of the latest design control requirements, as well as proven tools and techniques to ensure your company's design control program evolves in accordance with current industry practice. The text assists in the development of an effective design control program that not only satisfies the US FDA Quality System Regulation (QSR) and ISO 9001 and 13485 standards, but also meets today's third-party auditor/investigator expectations and saves you valuable time and money.The author's cont

  18. Control Systems Cyber Security Standards Support Activities

    Energy Technology Data Exchange (ETDEWEB)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  19. Standard mirror fusion reactor design study

    International Nuclear Information System (INIS)

    Moir, R.W.

    1978-01-01

    This report covers the work of the Magnetic Fusion Energy Division's reactor study group during FY 1976 on the standard mirror reactor. The ''standard'' mirror reactor is characterized as a steady state, neutral beam sustained, D-T fusioning plasma confined by a Yin-Yang magnetic mirror field. The physics parameters are obtained from the same physics model that explains the 2XIIB experiment. The model assumes that the drift cyclotron loss cone mode occurs on the boundary of the plasma, and that it is stabilized by warm plasma with negligible energy investment. The result of the study was a workable mirror fusion power plant, steady-state blanket removal made relatively simple by open-ended geometry, and no impurity problem due to the positive plasma potential. The Q (fusion power/injected beam power) turns out to be only 1.1 because of loss out the ends from Coulomb collisions, i.e., classical losses. This low Q resulted in 77% of the gross electrical power being used to power the injectors, thereby causing the net power cost to be high. The low Q stimulated an intensive search for Q-enhancement concepts, resulting in the LLL reactor design effort turning to the field reversal mirror and the tandem mirror, each having Q of order 5

  20. Transmission control unit drive based on the AUTOSAR standard

    Science.gov (United States)

    Guo, Xiucai; Qin, Zhen

    2018-03-01

    It is a trend of automotive electronics industry in the future that automotive electronics embedded system development based on the AUTOSAR standard. AUTOSAR automotive architecture standard has proposed the transmission control unit (TCU) development architecture and designed its interfaces and configurations in detail. This essay has discussed that how to drive the TCU based on AUTOSAR standard architecture. The results show that driving the TCU with the AUTOSAR system improves reliability and shortens development cycles.

  1. Standardization of positive controls in diagnostic immunohistochemistry

    DEFF Research Database (Denmark)

    Torlakovic, Emina E; Nielsen, Søren; Francis, Glenn

    2015-01-01

    advances in methodology. An Ad Hoc Expert Committee was formed to address the standardization of controls, which is a missing link in demonstrating and assuring standardization of the various components of dIHC. This committee has also developed a concept of immunohistochemistry critical assay performance...

  2. Development of standard design licensing system of nuclear power plants

    International Nuclear Information System (INIS)

    Lee, S. K.; Yun, Y. K.; Kim, W. S.; Lee, J. H.; Baek, M.

    2001-01-01

    The design of the APR 1400 (Advanced Power Reactor 1400) is being developed based on the concept of a standard design so that the APR 1400 can be constructed repetitively without major design change. Therefore, in order to avoid repetitive licensing review for the portion of the standard design of the APR 1400, it is necessary to introduced a new licensing system for a standard design. Since the Korean government has acknowledged this necessity, it is now pursuing the legislation of a standard design licensing system. In this technical report, procedural requirements and the format and contents of licensing basis documents considered for the adaption of a standard design licensing system are introduced

  3. Controller reconfiguration based on LTR design

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Stoustrup, J.

    2003-01-01

    Design of controller reconfiguration (CR) for systems with sensor faults are considered in this paper. One way to accommodate a failing sensor, is by replacing it by an observer based on the remaining outputs. A similar approach can be applied for a faulty actuator by duality. By including...... observers in the loop to replace faulty components, the nominal feedback controller does not need to be redesigned. The CR observer design problem for the faulty sensors or actuators can be rewritten into a standard loop transfer recovery (LTR) design problem, to which standard LTR design methods can...... be applied. Finally, it is shown that this CR architecture, where an CR observer is included in the feedback loop in between the system and the nominal controller, can be transformed into a more general fault tolerant controller (FTC) architecture based on the Youla parameterization....

  4. Teaching medical device design using design control.

    Science.gov (United States)

    May-Newman, Karen; Cornwall, G Bryan

    2012-01-01

    The design of medical devices requires an understanding of a large number of factors, many of which are difficult to teach in the traditional educational format. This subject benefits from using a challenge-based learning approach, which provides focused design challenges requiring students to understand important factors in the context of a specific device. A course was designed at San Diego State University (CA, USA) that applied challenge-based learning through in-depth design challenges in cardiovascular and orthopedic medicine, and provided an immersive field, needs-finding experience to increase student engagement in the process of knowledge acquisition. The principles of US FDA 'design control' were used to structure the students' problem-solving approach, and provide a format for the design documentation, which was the basis of grading. Students utilized a combination of lecture materials, industry guest expertise, texts and readings, and internet-based searches to develop their understanding of the problem and design their solutions. The course was successful in providing a greatly increased knowledge base and competence of medical device design than students possessed upon entering the course.

  5. Progress in standardization for ITER Remote Handling control system

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, David Thomas, E-mail: david.hamilton@iter.org [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Tesini, Alessandro [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Ranz, Roberto [Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); Kozaka, Hiroshi [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki-ken 311-0193 (Japan)

    2014-10-15

    Graphical abstract: - Highlights: • Standard parts specified for ITER Remote Handling (RH) control system. • Standard approach for VR modeling of structural deformations in real-time. • RH Core System produced as standard platform for RH controller applications. • Synthetic Viewing investigated and demonstrated. • Structured language defined for RH operation procedures and motion sequences. - Abstract: An integrated control system architecture has been defined for the ITER Remote Handling (RH) equipment systems, and work has been continuing to develop and validate standards for this architecture. Evaluations of standard parts and a standard control room work-cell have contributed to an update of the RH Control System Design Handbook, while R and D activities have been carried out to validate concepts for standard solutions to ITER RH problems: the use of a standard master arm with different slave arms, the achievement of high accuracy tracking of RH operations within virtual reality, and condition monitoring of RH equipment systems. The standardization efforts have been consolidated through the development of a freely distributable software platform to support the adoption of the ITER RH standards. The RH Core System installs on top of the CODAC Core System and provides the basic platform for the development of ITER RH equipment controller applications. The standardization work has continued in the areas of RH viewing, network communication protocols, and a structured language for programming ITER RH operations. Prototyping has been done on high-level control system applications, and R and D has been carried out in the area of synthetic viewing for ITER RH. These developments will be reflected in a new version of the RH Core System to be produced during 2013.

  6. Design for controllability

    OpenAIRE

    Tsukaya, Hirokazu

    2012-01-01

    The safety of genetically modified crops remains a contested issue, given the potential risk for human health and the environment. To further reduce any risks and alleviate public concerns, terminator technology could be used both to tag and control genetically modified plants.

  7. Earthquake design for controlled structures

    Directory of Open Access Journals (Sweden)

    Nikos G. Pnevmatikos

    2017-04-01

    Full Text Available An alternative design philosophy, for structures equipped with control devices, capable to resist an expected earthquake while remaining in the elastic range, is described. The idea is that a portion of the earthquake loading is under¬taken by the control system and the remaining by the structure which is designed to resist elastically. The earthquake forces assuming elastic behavior (elastic forces and elastoplastic behavior (design forces are first calculated ac¬cording to the codes. The required control forces are calculated as the difference from elastic to design forces. The maximum value of capacity of control devices is then compared to the required control force. If the capacity of the control devices is larger than the required control force then the control devices are accepted and installed in the structure and the structure is designed according to the design forces. If the capacity is smaller than the required control force then a scale factor, α, reducing the elastic forces to new design forces is calculated. The structure is redesigned and devices are installed. The proposed procedure ensures that the structure behaves elastically (without damage for the expected earthquake at no additional cost, excluding that of buying and installing the control devices.

  8. Design and fabrication of NDA standards

    International Nuclear Information System (INIS)

    Long, S.M.; Hsue, S.T.

    1996-01-01

    The Plutonium Facility, TA-55, at Los Alamos National Laboratory is currently producing NDA calibration standards used by various laboratories in the DOE complex. These NIST traceable standards have been produced to calibrate NDA instruments for accountability measurements used for resolving shipper/receiver differences, and for accountability in process residues and process waste. Standards are needed to calibrate various NDA (Non-destructive Assay) instruments such as neutron coincidence counters, gamma-ray counters, and calorimeters. These instruments measure various ranges of nuclear material being produced in the DOE nuclear community. Los Alamos National Laboratory has taken a lead role in fabrication of uranium and plutonium standards, along with other actinides such as neptunium and americium. These standards have been fabricated for several laboratories within the complex. This paper will summarize previous publications detailing the careful planning encompassing components such as precise weighing, destructive analysis, and the use of post fabrication NDA measurements to confirm that the standards meet all preliminary expectations before use in instrument calibration. The paper will also describe the specialized containers, diluents, and the various amount of nuclear materials needed to accommodate the calibration ranges of the instruments

  9. 38 CFR 39.22 - Architectural design standards.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Architectural design...-16-10) Standards and Requirements for Project § 39.22 Architectural design standards. The..., Ontario, CA 91761-2816. (a) Architectural and structural requirements—(1) Life Safety Code. Standards must...

  10. EMI/EMC standards for PFBR instrumentation and control systems

    International Nuclear Information System (INIS)

    Krishnakumar, B.; Sundararajan, M.K.; Ilango Sambasivan, S.; Sivaramakrishna, M.

    2005-01-01

    Electromagnetic Interference and Electromagnetic compatibility (EMI/EMC) is one of the major issues to be addressed in the design, development, installation commissioning and maintenance of electronic systems in the Nuclear Power Plant (NPP). That calls for a proper EMI/EMC standard to be adhered to. This paper recommends a standard to be followed for PFBR instrumentation and control (I and C) systems. (author)

  11. JSC Design and Procedural Standards, JSC-STD-8080

    Science.gov (United States)

    Punch, Danny T.

    2011-01-01

    This document provides design and procedural requirements appropriate for inclusion in specifications for any human spaceflight program, project, spacecraft, system, or end item. The term "spacecraft" as used in the standards includes launch vehicles, orbital vehicles, non-terrestrial surface vehicles, and modules. The standards are developed and maintained as directed by Johnson Space Center (JSC) Policy Directive JPD 8080.2, JSC Design and Procedural Standards for Human Space Flight Equipment. The Design and Procedural Standards contained in this manual represent human spacecraft design and operational knowledge applicable to a wide range of spaceflight activities. These standards are imposed on JSC human spaceflight equipment through JPD 8080.2. Designers shall comply with all design standards applicable to their design effort.

  12. Integrated controls design optimization

    Science.gov (United States)

    Lou, Xinsheng; Neuschaefer, Carl H.

    2015-09-01

    A control system (207) for optimizing a chemical looping process of a power plant includes an optimizer (420), an income algorithm (230) and a cost algorithm (225) and a chemical looping process models. The process models are used to predict the process outputs from process input variables. Some of the process in puts and output variables are related to the income of the plant; and some others are related to the cost of the plant operations. The income algorithm (230) provides an income input to the optimizer (420) based on a plurality of input parameters (215) of the power plant. The cost algorithm (225) provides a cost input to the optimizer (420) based on a plurality of output parameters (220) of the power plant. The optimizer (420) determines an optimized operating parameter solution based on at least one of the income input and the cost input, and supplies the optimized operating parameter solution to the power plant.

  13. Achieving IT-supported standardized nursing documentation through participatory design

    DEFF Research Database (Denmark)

    Rasmussen, Stine Loft; Lyng, Karen Marie; Jensen, Sanne

    2012-01-01

    that support guideline-based highly structured standard documentation in a large organization with many stakeholders. Applying a participatory design (PD) approach at many organizational levels has involved the stakeholders actively in the design process. Developing a set of design principles has concurrently...... made it possible to frame the discussions among the different stakeholders. Both PD and design principles have been instrumental in designing and implementing a set of standard templates that support the daily work and coordination between the nurses...

  14. PROWAY - a standard for distributed control systems

    International Nuclear Information System (INIS)

    Gellie, R.W.

    1980-01-01

    The availability of cheap and powerful microcomputer and data communications equipment has led to a major revision of instrumentation and control systems. Intelligent devices can now be used and distributed about the control system in a systematic and economic manner. These sub-units are linked by a communications system to provide a total system capable of meeting the required plant objectives. PROWAY, an international standard process data highway for interconnecting processing units in distributed industrial process control systems, is currently being developed. This paper describes the salient features and current status of the PROWAY effort. (auth)

  15. Report on design and technical standard planning of vibration controlling structure on the buildings, in the Tokai Reprocessing Facility, Power Reactor and Nuclear Fuel Development Corporation

    International Nuclear Information System (INIS)

    Uryu, Mitsuru; Terada, Shuji; Shinohara, Takaharu; Yamazaki, Toshihiko; Nakayama, Kazuhiko; Kondo, Toshinari; Hosoya, Hisashi

    1997-10-01

    The Tokai reprocessing facility buildings are constituted by a lower foundation, vibration controlling layers, and upper structure. At the vibration controlling layer, a laminated rubber aiming support of the building load and extension of the eigenfrequency and a damper aiming absorption of earthquake energy are provided. Of course, the facility buildings are directly supported at the arenaceous shale (Taga Layer) of the Miocene in the Neogene confirmed to the stablest ground, as well the buildings with high vibration resistant importance in Japan. This report shows that when the vibration controlling structure is adopted for the reprocessing facility buildings where such high vibration resistance is required, reduction of input acceleration for equipments and pipings can be achieved and the earthquake resistant safety can also be maintained with sufficient tolerance and reliability. (G.K.)

  16. 7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

    Science.gov (United States)

    2010-01-01

    ..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply with...

  17. System Design for Navy Occupational Standards Development

    Science.gov (United States)

    2014-07-01

    need to increase access and visibility, reduce errors and approval times, institute administrative metrics, and standardize the occupational...considerable effort is devoted to ensuring that the grammatical style and form of tasks are consistent across tasks and among other rating OCCSTDs. Once the...reduced overhead and 12 complexity when writing queries for reports. This encapsulation of the data store also increases the portability and

  18. Use of the module of functional operator in designing the standard means for data processing in the automated control system of NPP construction

    International Nuclear Information System (INIS)

    Lyanko, S.D.; Teslya, Yu.N.

    1988-01-01

    Problems of automated control system introduction in the process of NPP construction are discussed. The notion of information medium and the structure of the automated system software are considered. The automated system of information service for management departments introduced at the South Ukrainian NPP is described. Block structure of the program modules of the system permitted to increase its efficiency and simplified further developments

  19. Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

    Directory of Open Access Journals (Sweden)

    Farrar Jeremy

    2011-02-01

    Full Text Available Abstract Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of

  20. Controlling radiated emissions by design

    CERN Document Server

    Mardiguian, Michel

    2014-01-01

    The 3rd edition of Controlling Radiated Emissions by Design has been updated to reflect the latest changes in the field. New to this edition is material related to technical advances, specifically super-fast data rates on wire pairs, with no increase in RF interference. Throughout the book, details are given to control RF emissions using EMC design techniques. This book retains the step-by-step approach for incorporating EMC into every new design from the ground up. It describes the selection of quieter IC technologies, their implementation into a noise-free printed circuit layout, and the gathering of these into a low emissions package. Also included is how to design an I/O filter, along with connectors and cable considerations. All guidelines are supported throughout with comprehensive calculated examples. Design engineers, EMC specialists, and technicians will benefit from learning about the development of more efficient and economical control of emissions.

  1. System 80+{trademark} Standard Design: CESSAR design certification. Volume 16: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+{trademark} Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process.

  2. System 80+{trademark} Standard Design: CESSAR design certification. Volume 2: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 2, in conjunction with Volume 3, provides the design of structures, components, equipment and systems.

  3. System 80+{trademark} Standard Design: CESSAR design certification. Volume 4: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 4, provides a description of the reactor, reactor internals, fuel assemblies, and associated design requirements.

  4. State Skill Standards: Fashion, Textiles and Design

    Science.gov (United States)

    Campbell, Rene Crepaldi; Gaudy, Glenna; Green-Jobe, Victoria; Hatch, Susan; Moen, Julianne; Sheldon, Shannon; Smith, Loree; Chessell, Karen

    2008-01-01

    The mission of Fashion, Textiles and Design Education is to prepare students for family and community life and careers in the fashion industry by creating opportunities to develop the knowledge, skills, attitudes and behaviors needed to: (1) Examine skills needed to effectively manage clothing decisions; (2) Evaluate the use, care and production…

  5. Radiological controls integrated into design

    Energy Technology Data Exchange (ETDEWEB)

    Kindred, G.W. [Cleveland Electric Illuminating Co., Perry, OH (United States)

    1995-03-01

    Radiological controls are required by law in the design of commercial nuclear power reactor facilities. These controls can be relatively minor or significant, relative to cost. To ensure that radiological controls are designed into a project, the health physicist (radiological engineer) must be involved from the beginning. This is especially true regarding keeping costs down. For every radiological engineer at a nuclear power plant there must be fifty engineers of other disciplines. The radiological engineer cannot be an expert on every discipline of engineering. However, he must be knowledgeable to the degree of how a design will impact the facility from a radiological perspective. This paper will address how to effectively perform radiological analyses with the goal of radiological controls integrated into the design package.

  6. Controlled Vocabulary Standards for Anthropological Datasets

    Directory of Open Access Journals (Sweden)

    Celia Emmelhainz

    2014-07-01

    Full Text Available This article seeks to outline the use of controlled vocabulary standards for qualitative datasets in cultural anthropology, which are increasingly held in researcher-accessible government repositories and online digital libraries. As a humanistic science that can address almost any aspect of life with meaning to humans, cultural anthropology has proven difficult for librarians and archivists to effectively organize. Yet as anthropology moves onto the web, the challenge of organizing and curating information within the field only grows. In considering the subject classification of digital information in anthropology, I ask how we might best use controlled vocabularies for indexing digital anthropological data. After a brief discussion of likely concerns, I outline thesauri which may potentially be used for vocabulary control in metadata fields for language, location, culture, researcher, and subject. The article concludes with recommendations for those existing thesauri most suitable to provide a controlled vocabulary for describing digital objects in the anthropological world.

  7. The efficacy of a standardized questionnaire in facilitating personalized communication about problems encountered in cancer genetic counseling: design of a randomized controlled trial.

    Science.gov (United States)

    Eijzenga, Willem; Aaronson, Neil K; Kluijt, Irma; Sidharta, Grace N; Hahn, Daniela Ee; Ausems, Margreet Gem; Bleiker, Eveline Ma

    2014-01-15

    Individuals with a personal or family history of cancer, can opt for genetic counseling and DNA-testing. Approximately 25% of these individuals experience clinically relevant levels of psychosocial distress, depression and/or anxiety after counseling. These problems are frequently left undetected by genetic counselors. The aim of this study is to evaluate the efficacy of a cancer genetics-specific screening questionnaire for psychosocial problems, the 'Psychosocial Aspects of Hereditary Cancer (PAHC) questionnaire' together with the Distress Thermometer, in: (1) facilitating personalized counselor-counselee communication; (2) increasing counselors' awareness of their counselees' psychosocial problems; and (3) facilitating the management of psychosocial problems during and after genetic counseling. This multicenter, randomized controlled trial will include 264 individuals undergoing cancer genetic counseling in two family cancer clinics in the Netherlands. Participants will be randomized to either: (1) an intervention group that completes the PAHC questionnaire, the results of which are made available to the genetic counselor prior to the counseling session; or (2) a control group that completes the PAHC questionnaire, but without feedback being given to the genetic counselor. The genetic counseling sessions will be audiotaped for content analysis. Additionally, study participants will be asked to complete questionnaires at baseline, three weeks after the initial counseling session, and four months after a telephone follow-up counseling session. The genetic counselors will be asked to complete questionnaires at the start of and at completion of the study, as well as a checklist directly after each counseling session. The questionnaires/checklists of the study include items on communication during genetic counseling, counselor awareness of their clients' psychosocial problems, the (perceived) need for professional psychosocial support, cancer worries, general

  8. Interior Design Standards in the Secondary FCS Curriculum

    Science.gov (United States)

    Katz, Shana H.; Smith, Bettye P.

    2006-01-01

    This article deals with a study on interior design standards in the secondary FCS curriculum. This study assessed the importance FCS teachers placed on content standards in the interior design curriculum to help determine the amount of time and emphasis to place on the units within the courses. A cover letter and questionnaire were sent…

  9. Integrated Aeropropulsion Control System Design

    Science.gov (United States)

    Lin, C. -F.; Hurley, Francis X.; Huang, Jie; Hadaegh, F. Y.

    1996-01-01

    %T Integrated Aeropropulsion Control System Design%A C-F. Lin%A Francis X. Hurley%A Jie Huang%A F. Y. Hadaegh%J International Conference on Control and Information(psi)995%C Hong Kong%D June 1995%K aeropropulsion, control, system%U http://jpltrs.jpl.nasa.gov/1995/95-0658.pdfAn integrated intelligent control approach is proposed to design a high performance control system for aeropropulsion systems based on advanced sensor processing, nonlinear control and neural fuzzy control integration. Our approach features the following innovations:??e complexity and uncertainty issues are addressed via the distributed parallel processing, learning, and online reoptimization properties of neural networks.??e nonlinear dynamics and the severe coupling can be naturally incorporated into the design framework.??e knowledge base and decision making logic furnished by fuzzy systems leads to a human intelligence enhanced control scheme.In addition, fault tolerance, health monitoring and reconfigurable control strategies will be accommodated by this approach to ensure stability, graceful degradation and reoptimization in the case of failures, malfunctions and damage.!.

  10. System 80+{trademark} standard design: CESSAR design certification. Volume 5: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design.

  11. Instrumentation and control system design

    International Nuclear Information System (INIS)

    Saito, Kenji; Sawahata, Hiroaki; Homma, Fumitaka; Kondo, Makoto; Mizushima, Toshihiko

    2004-01-01

    The instrumentation and control system of the high temperature engineering test reactor consists of the instrumentation, control equipments and safety protection systems. There are not many differences in the instrumentation and control equipments design between the HTTR and light water reactors except for some features. Various kinds of R and D of reactor instrumentation were performed taking into account the HTTR operational conditions, and a plant dynamic analysis was carried out considering the operational conditions of the HTTR in order to design the control system. These systems are required to have a high reliability in respect to safety. In the rise-to-power test it was confirmed that the instrumentation has a high reliability and the control system has a high stability and reasonable damped characteristics for various disturbances

  12. System 80+{trademark} Standard Design: CESSAR design certification. Volume 11: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program.

  13. System 80+{trademark} Standard Design: CESSAR design certification. Volume 9: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems.

  14. NASA STD-4005: The LEO Spacecraft Charging Design Standard

    Science.gov (United States)

    Ferguson, Dale C.

    2006-01-01

    Power systems with voltages higher than about 55 volts may charge in Low Earth Orbit (LEO) enough to cause destructive arcing. The NASA STD-4005 LEO Spacecraft Charging Design Standard will help spacecraft designers prevent arcing and other deleterious effects on LEO spacecraft. The Appendices, an Information Handbook based on the popular LEO Spacecraft Charging Design Guidelines by Ferguson and Hillard, serve as a useful explanation and accompaniment to the Standard.

  15. Robust control design with MATLAB

    CERN Document Server

    Gu, Da-Wei; Konstantinov, Mihail M

    2013-01-01

    Robust Control Design with MATLAB® (second edition) helps the student to learn how to use well-developed advanced robust control design methods in practical cases. To this end, several realistic control design examples from teaching-laboratory experiments, such as a two-wheeled, self-balancing robot, to complex systems like a flexible-link manipulator are given detailed presentation. All of these exercises are conducted using MATLAB® Robust Control Toolbox 3, Control System Toolbox and Simulink®. By sharing their experiences in industrial cases with minimum recourse to complicated theories and formulae, the authors convey essential ideas and useful insights into robust industrial control systems design using major H-infinity optimization and related methods allowing readers quickly to move on with their own challenges. The hands-on tutorial style of this text rests on an abundance of examples and features for the second edition: ·        rewritten and simplified presentation of theoretical and meth...

  16. ISABELLE control system: design concepts

    International Nuclear Information System (INIS)

    Humphrey, J.W.

    1979-01-01

    ISABELLE is a Department of Energy funded proton accelerator/storage ring being built at Brookhaven National Laboratory (Upton, Long Island, New York). It is large (3.8 km circumference) and complicated (approx. 30,000 monitor and control variables). It is based on superconducting technology. Following the example of previous accelerators, ISABELLE will be operated from a single control center. The control system will be distributed and will incorporate a local computer network. An overview of the conceptual design of the ISABELLE control system will be presented

  17. Standard guide for design criteria for plutonium gloveboxes

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This guide defines criteria for the design of glovebox systems to be used for the handling of plutonium in any chemical or physical form or isotopic composition or when mixed with other elements or compounds. Not included in the criteria are systems auxiliary to the glovebox systems such as utilities, ventilation, alarm, and waste disposal. Also not addressed are hot cells or open-face hoods. The scope of this guide excludes specific license requirements relating to provisions for criticality prevention, hazards control, safeguards, packaging, and material handling. Observance of this guide does not relieve the user of the obligation to conform to all federal, state, and local regulations for design and construction of glovebox systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user...

  18. NASA-STD-4005 and NASA-HDBK-4006, LEO Spacecraft Solar Array Charging Design Standard

    Science.gov (United States)

    Ferguson, Dale C.

    2007-01-01

    Two new NASA Standards are now official. They are the NASA LEO Spacecraft Charging Design Standard (NASA-STD-4005) and the NASA LEO Spacecraft Charging Design Handbook (NASA-HDBK-4006). They give the background and techniques for controlling solar array-induced charging and arcing in LEO. In this paper, a brief overview of the new standards is given, along with where they can be obtained and who should be using them.

  19. Standardized surface engineering design of shale gas reservoirs

    Directory of Open Access Journals (Sweden)

    Guangchuan Liang

    2016-01-01

    Full Text Available Due to the special physical properties of shale gas reservoirs, it is necessary to adopt unconventional and standardized technologies for its surface engineering construction. In addition, the surface engineering design of shale gas reservoirs in China faces many difficulties, such as high uncertainty of the gathering and transportation scale, poor adaptability of pipe network and station layout, difficult matching of the process equipments, and boosting production at the late stage. In view of these problems, the surface engineering construction of shale gas reservoirs should follow the principles of “standardized design, modularized construction and skid mounted equipment”. In this paper, standardized surface engineering design technologies for shale gas reservoirs were developed with the “standardized well station layout, universal process, modular function zoning, skid mounted equipment selection, intensive site design, digitized production management” as the core, after literature analysis and technology exploration were carried out. Then its application background and surface technology route were discussed with a typical shale gas field in Sichuan–Chongqing area as an example. Its surface gathering system was designed in a standardized way, including standardized process, the modularized gathering and transportation station, serialized dehydration unit and intensive layout, and remarkable effects were achieved. A flexible, practical and reliable ground production system was built, and a series of standardized technology and modularized design were completed, including cluster well platform, set station, supporting projects. In this way, a system applicable to domestic shale gas surface engineering construction is developed.

  20. Design and industrial production of frequency standards in the USSR

    Science.gov (United States)

    Demidov, Nikolai A.; Uljanov, Adolph A.

    1990-01-01

    Some aspects of research development and production of quantum frequency standards, carried out in QUARTZ Research and Production Association (RPA), Gorky, U.S.S.R., were investigated for the last 25 to 30 years. During this period a number of rubidium and hydrogen frequency standards, based on the active maser, were developed and put into production. The first industrial model of a passive hydrogen maser was designed in the last years. Besides frequency standards for a wide application range, RPA QUARTZ investigates metrological frequency standards--cesium standards with cavity length 1.9 m and hydrogen masers with a flexible storage bulb.

  1. Update of bridge design standards in Alabama for AASHTO LRFD seismic design requirements.

    Science.gov (United States)

    2013-11-01

    The Alabama Department of Transportation (ALDOT) has been required to update their bridge design to the LRFD Bridge Design Specifications. This transition has resulted in changes to the seismic design standards of bridges in the state. Multiple bridg...

  2. Design of reconfigurable logic controllers

    CERN Document Server

    Bukowiec, Arkadiusz; Doligalski, Michał; Tkacz, Jacek

    2016-01-01

    This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the recon...

  3. Rethinking Space Design Standards Toward Quality Affordable Housing In Malaysia

    Directory of Open Access Journals (Sweden)

    Ishak Nor Haniza

    2016-01-01

    Full Text Available Provision of affordable housing is important to low- and middle-income population. A fit form of house will not only fulfil a basic human need for shelter, but it also contributes to physical and psychological well-being of the occupants. Excellent quality and affordable housing is an indication of a high quality of life. While writings exist on various aspects of the quality of affordable housing in Malaysia, discussion regarding space and design standards has scarcely been given any serious academic attention. Standards concerning residential development usually cover different aspects or stages of the development process. They can include planning standards, design standards, space standards and technical construction standards. The main concern of this paper is on space and design standards specifically. Space standard can be defined as a set of framework which dictates fixed internal space minimums. Meanwhile, design standard indicates design guidelines to ensure the functionality, comfortability and habitability of the house. This paper is concerned exclusively with indoor spaces of a house excluding external circulation spaces and service facilities (in case of strata housing. Its interest is in internal space as an aspect of housing quality. It can be concluded that one of the way forward will be to find the balance between providing adequate minimum spaces for resident satisfactions and having economic values for housing developers. This paper may be used as a valuable reference for authorities and policy makers to better address the best housing space design standards that would benefit not only the occupants, but also the local government and developers alike.

  4. Computing tools for implementing standards for single-case designs.

    Science.gov (United States)

    Chen, Li-Ting; Peng, Chao-Ying Joanne; Chen, Ming-E

    2015-11-01

    In the single-case design (SCD) literature, five sets of standards have been formulated and distinguished: design standards, assessment standards, analysis standards, reporting standards, and research synthesis standards. This article reviews computing tools that can assist researchers and practitioners in meeting the analysis standards recommended by the What Works Clearinghouse: Procedures and Standards Handbook-the WWC standards. These tools consist of specialized web-based calculators or downloadable software for SCD data, and algorithms or programs written in Excel, SAS procedures, SPSS commands/Macros, or the R programming language. We aligned these tools with the WWC standards and evaluated them for accuracy and treatment of missing data, using two published data sets. All tools were tested to be accurate. When missing data were present, most tools either gave an error message or conducted analysis based on the available data. Only one program used a single imputation method. This article concludes with suggestions for an inclusive computing tool or environment, additional research on the treatment of missing data, and reasonable and flexible interpretations of the WWC standards. © The Author(s) 2015.

  5. OSHA Bloodborne Pathogens Standards Exposure Control Plan

    Science.gov (United States)

    Luhrs, Caro Elise; Teitelbaum, Rita

    1993-01-01

    The Hummer Associates Exposure Control Plan is designed to reduce significant occupational exposure to bloodborne pathogens and infectious materials for Hummer Associates health care personnel. Under universal precautions, all patients and all body fluids are considered potentially infectious for bloodborne pathogens. Medical personnel need not be at increased risk if universal precautions are correctly understood and followed. This program covers all employees who could reasonably anticipate contact with blood or other potentially infectious materials during the performance of their job responsibilities. Although HIV and hepatitis B are mentioned most often, this program applies to all bloodborne diseases. The two main components needed to implement this program are universal precautions and engineering/work practice controls. This program covers all employees who may have occupational exposure to blood or other potentially infectious materials. Other aspects of this program are discussed.

  6. Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

    Science.gov (United States)

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

  7. Consistent Design of Dependable Control Systems

    DEFF Research Database (Denmark)

    Blanke, M.

    1996-01-01

    Design of fault handling in control systems is discussed, and a method for consistent design is presented.......Design of fault handling in control systems is discussed, and a method for consistent design is presented....

  8. International standardization of nuclear reactor designs - the way forward

    International Nuclear Information System (INIS)

    Raetzke, Christian

    2010-01-01

    The concept of 'International Standardization of Nuclear Reactor Designs' means that vendors could build their designs in every country without having to adapt it specifically to national safety requirements. Such standardization would have two main effects. It would greatly facilitate nuclear new build worldwide by giving greater efficiency and certainty to the national licensing procedures; by taking into account the fact that vendors, and nowadays also utilities, are active across borders; by helping developing countries to establish their nuclear new build programmes; and by reducing the strain on human resources on both the regulators' and the industry's side. The second valuable effect of standardization would be to further enhance safety by improving the exchange of construction and operating experience among a number of reactors belonging to fleets of the same design. The World Nuclear Association's CORDEL (Cooperation in Reactor Design Evaluation and Licensing) Group has developed a concept for implementation of international standardization of reactor designs. It has defined a number of steps to be taken by industry. At the same time, possibilities offered by national and international regulatory mechanisms would have to be fully made use of, and some changes in regulatory frameworks might be necessary. Some steps especially towards greater cooperation of regulators have already been taken; however, much still remains to be done. The concept of deploying standardized reactor designs across a number of countries supposes an alignment and, if possible, harmonization of national safety standards; a streamlining of national licensing procedures, making them more efficient and predictable; and the willingness of national regulators to take into account licensing done in other countries. In the end, this should lead to a mutual acceptance of design approvals or, in a more distant future, even to a multinational design approval process. All in all, the concept

  9. The development of an ergonomics standard for the design of operator interfaces

    International Nuclear Information System (INIS)

    Kirwan, B.; Reed, J.; Litherland, M.

    1990-01-01

    BNFL has realised the need to take a consistent approach to the ergonomic design of operator interfaces. Towards this aim, a design standard document has been produced under the direction of a principal design engineer based on the key ergonomics aspects of plant design. The standard was requested by the designers, and the original standard was produced by ergonomists working on BNFL projects. This standard was then reviewed by a large number of key design and operations personnel, and a series of multidisciplinary meetings produced the final version. The standard contains six sections (ergonomics requirements for the design of Control Rooms, Consoles and Panels Design, Labelling, VDU Systems, Alarm Systems and Colour Coding) containing approximately 180 guidelines in text format or supplemented by diagrams and tables. Each guideline is classified as either mandatory or advisory. A high proportion of effort concentrated on making the document usable by designers. The standard is not intended to be fully comprehensive, since the range of possible variations in the designs of interfaces makes such a task intractable at this stage. However, the document does ensure that account is taken of ergonomics throughout the design phase, and particularly in the early phases whilst design change is still cost-effective, and that designers are aware of the important issues and principles. (author)

  10. Legislatation, standards and awareness of inclusive design in Denmark

    DEFF Research Database (Denmark)

    Colfelt, Solvej; Herriott, Richard

    This presents an overview of the design professions´response to government policies on accessibility and inclusive design. Architectural firms and industrial design firms have different levels of awareness and willingness to implement inclusive design and accessibility objectives. This is driven ...... in part by variation in standards and regulations between industry sectors. Interest groups apparently do not approach accessibility and design-inclusivity objectives in an orchestrated fashion and do not show an awareness of design a means to provide solution.......This presents an overview of the design professions´response to government policies on accessibility and inclusive design. Architectural firms and industrial design firms have different levels of awareness and willingness to implement inclusive design and accessibility objectives. This is driven...

  11. Renewable Electricity Standards: Good Practices and Design Considerations

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Esterly, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-02

    In widespread use globally, renewable electricity standards (RES) are one of the most widely adopted renewable energy policies and a critical regulatory vehicle to accelerate renewable energy deployment. This policy brief provides an introduction to key RES design elements, lessons from country experience, and support resources to enable more detailed and country-specific RES policy design.

  12. Using the IMS LD Standard to Describe Learning Designs

    NARCIS (Netherlands)

    Koper, Rob; Miao, Yongwu

    2007-01-01

    Koper, R., & Miao, Y. (2008). Using the IMS LD Standard to Describe Learning Designs. In L. Lockyer, S. Bennet, S. Agostinho & B. Harper (Eds.), Handbook of Research on Learning Design and Learning Objects: Issues, Applications and Technologies (pp. 41-86). IDEA group.

  13. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2006-05-01

    The use of cyber security standards can greatly assist in the protection of process control systems by providing guidelines and requirements for the implementation of computer-controlled systems. These standards are most effective when the engineers and operators, using the standards, understand what each standard addresses. This paper provides an overview of several standards that deal with the cyber security of process measurements and control systems.

  14. Practical design control implementation for medical devices

    CERN Document Server

    Justiniano, Jose

    2003-01-01

    Bringing together the concepts of design control and reliability engineering, this book is a must for medical device manufacturers. It helps them meet the challenge of designing and developing products that meet or exceed customer expectations and also meet regulatory requirements. Part One covers motivation for design control and validation, design control requirements, process validation and design transfer, quality system for design control, and measuring design control program effectiveness. Part Two discusses risk analysis and FMEA, designing-in reliability, reliability and design verific

  15. Designing the Information Literacy Competency Standards for nursing.

    Science.gov (United States)

    Phelps, Sue F

    2013-01-01

    This column documents the rationale for creating information literacy competency standards for nursing based on the Association of College and Research Libraries (ACRL) "Information Literacy Competency Standards for Higher Education" and the three documents from the American Association of Colleges of Nursing (AACN) on essential skills for nurses in baccalaureate, masters, and doctoral level education and practice. It chronicles the process of the task force which is designing the discipline specific skills and predicts the value of their use, once they are published.

  16. Fusion reactor design studies: standard accounts for cost estimates

    International Nuclear Information System (INIS)

    Schulte, S.C.; Willke, T.L.; Young, J.R.

    1978-05-01

    The fusion reactor design studies--standard accounts for cost estimates provides a common format from which to assess the economic character of magnetically confined fusion reactor design concepts. The format will aid designers in the preparation of design concept costs estimates and also provide policymakers with a tool to assist in appraising which design concept may be economically promising. The format sets forth a categorization and accounting procedure to be used when estimating fusion reactor busbar energy cost that can be easily and consistently applied. Reasons for developing the procedure, explanations of the procedure, justifications for assumptions made in the procedure, and the applicability of the procedure are described in this document. Adherence to the format when evaluating prospective fusion reactor design concepts will result in the identification of the more promising design concepts thus enabling the fusion power alternatives with better economic potential to be quickly and efficiently developed

  17. System 80+{trademark} standard design incorporates radiation protection lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Crom, T.D.; Naugle, C.L. [Duke Engineering & Services, Inc., Charlotte, NC (United States); Turk, R.S. [ABB Combustion Engineering Nuclear Power, Windsor, CT (United States)

    1995-03-01

    Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commission (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.

  18. Design of SPring-8 control system

    International Nuclear Information System (INIS)

    Wada, T.; Kumahara, T.; Yonehara, H.; Yoshikawa, H.; Masuda, T.; Wang Zhen

    1992-01-01

    The control system of SPring-8 facility is designed. A distributed computer system is adopted with a three-hierarchy levels. All the computers are linked by computer networks. The network of upper level is a high-speed multi-media LAN such as FDDI which links sub-system control computers, and middle are Ethernet or MAP networks which link front end processors (FEP) such as VME system. The lowest is a field level bus which links VME and controlled devices. Workstations (WS) or X-terminals are useful for man-machine interfaces. For operating system (OS), UNIX is useful for upper level computers, and real-time OS's for FEP's. We will select hardwares and OS of which specifications are close to international standards. Since recently the cost of software has become higher than that of hardware, we introduce computer aided tools as many as possible for program developments. (author)

  19. Implementation of Standardized Vehicle Control Commands

    National Research Council Canada - National Science Library

    Crane, C

    2000-01-01

    .... The objective was to develop a standardized message that would be applicable to a wide variety of vehicles such as steered-wheeled and tracked ground vehicles, fixed wing and rotary air vehicles...

  20. Quantitative resilience analysis through control design.

    Energy Technology Data Exchange (ETDEWEB)

    Sunderland, Daniel; Vugrin, Eric D.; Camphouse, Russell Chris (Sandia National Laboratories, Carlsbad, NM)

    2009-09-01

    Critical infrastructure resilience has become a national priority for the U. S. Department of Homeland Security. System resilience has been studied for several decades in many different disciplines, but no standards or unifying methods exist for critical infrastructure resilience analysis. Few quantitative resilience methods exist, and those existing approaches tend to be rather simplistic and, hence, not capable of sufficiently assessing all aspects of critical infrastructure resilience. This report documents the results of a late-start Laboratory Directed Research and Development (LDRD) project that investigated the development of quantitative resilience through application of control design methods. Specifically, we conducted a survey of infrastructure models to assess what types of control design might be applicable for critical infrastructure resilience assessment. As a result of this survey, we developed a decision process that directs the resilience analyst to the control method that is most likely applicable to the system under consideration. Furthermore, we developed optimal control strategies for two sets of representative infrastructure systems to demonstrate how control methods could be used to assess the resilience of the systems to catastrophic disruptions. We present recommendations for future work to continue the development of quantitative resilience analysis methods.

  1. The PRICE study (Protection Rest Ice Compression Elevation: design of a randomised controlled trial comparing standard versus cryokinetic ice applications in the management of acute ankle sprain [ISRCTN13903946

    Directory of Open Access Journals (Sweden)

    Rocke Laurence G

    2007-12-01

    Full Text Available Abstract Background Cryotherapy (the application of ice for therapeutic purposes is one of the most common treatment modalities employed in the immediate management of acute soft tissue injury. Despite its widespread clinical use, the precise physiological responses to therapeutic cooling have not been fully elucidated, and effective evidence-based treatment protocols are yet to be established. Intermittent ice applications are thought to exert a significant analgesic effect. This could facilitate earlier therapeutic exercise after injury, potentially allowing for a quicker return to activity. The primary aim of the forthcoming study is therefore to examine the safety and effectiveness of combining intermittent ice applications with periods of therapeutic exercise in the first week after an acute ankle sprain. Methods/Design The study is a randomised controlled trial. 120 subjects with an acute grade I or grade II ankle sprain will be recruited from Accident & Emergency and a University based Sports Injury Clinic. Subjects will be randomised under strict double-blind conditions to either a standard cryotherapy (intermittent ice applications with compression or cryokinetic treatment group (intermittent ice applications with compression and therapeutic exercise. After the first week, treatment will be standardised across groups. Assessor blinding will be maintained throughout the trial. Primary outcome will be function, assessed using the Lower Extremity Functional Scale (LEFS. Additional outcomes will include pain (10 cm Visual Analogue Scale, swelling (modified figure-of-eight method and activity levels (activPAL™ physical activity monitor, PAL Technologies, Glasgow, UK. Diagnostic Ultrasound (Episcan-1-200 high frequency ultrasound scanning system, Longport International Ltd, PA will also be used to assess the degree of soft tissue injury. After baseline assessment subjects will be followed up at 1, 2, 3 & 4 weeks post injury. All data will

  2. Safety effects of road design standards in Europe.

    NARCIS (Netherlands)

    Wegman, F.C.M. & Slop, M.

    2003-01-01

    This paper deals with the result of a study carried out for the European Commission by the SWOV Institute for Road Safety Research, in cooperation with a number of other European institutes, and which was reported in 1994. The title of the study is "Safety Effects of Road Design Standards." The aims

  3. Design Standardized Web-Components for e-Learning

    OpenAIRE

    Belonogov, Andrey

    2007-01-01

    In this paper a flexible approach to design LMS with QTI Ready component based on the e-Learning standards AICC and IMS QTI is described. This system and component permits a dynamic learning and assessment process. QTI Ready component can provide these facilities to other real world virtual learning management system.

  4. Assessment of Offshore Wind System Design, Safety, and Operation Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sirnivas, Senu [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bailey, Bruce [AWS Trupower LLC, Albany, NY (United States); Filippelli, Matthew [AWS Trupower LLC, Albany, NY (United States)

    2014-01-01

    This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certification requirements.

  5. Controlling engineering project changes for multi-unit, multi-site standardized nuclear power plants

    International Nuclear Information System (INIS)

    Randall, E.; Boddeker, G.; McGugin, H.; Strother, E.; Waggoner, G.

    1978-01-01

    Multibillioin dollar multiple nuclear power plant projects have numerous potential sources of engineering changes. The majority of these are internally generated changes, client generated changes, and changes from construction, procurement, other engineering organizations, and regulatory organizations. For multiunit, multisite projects, the use of a standardized design is cost effective. Engineering changes can then be controlled for a single standardized design, and the unit or site unique changes can be treated as deviations. Once an effective change procedure is established for change control of the standardized design, the same procedures can be used for control of unit or site unique changes

  6. Embedded Control System Design A Model Based Approach

    CERN Document Server

    Forrai, Alexandru

    2013-01-01

    Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging  the gap between theory and practice.  The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are face...

  7. Screen Speed Designations: A Need For Standardization And Some Suggestions

    Science.gov (United States)

    Zweig, Gilbert

    1981-07-01

    Anyone who has tried to interchange different intensifying screens for a given procedure while maintaining consistent image density, appreciates the problem resulting from the lack of standardized screen speed designations. The problem has resulted, in part, from the variety of product names which we manufactur-ers have coined for our screens to establish screen brand identity and differentiation. These names, in most cases, give no indication of relative screen speed. Presently, there are no standard measuring procedures which the radiographer can use for routinely determining screen speed. The greater non-linear KVp response of the rare-earth phosphors, in fact, makes the use of single number designations deceptive. Different methods for designating screen speeds will be examined and a technique for transposing between different screens will be discussed.

  8. Design Performance Standards for Large Scale Wind Farms

    DEFF Research Database (Denmark)

    Gordon, Mark

    2009-01-01

    This document presents, discusses and provides a general guide on electrical performance standard requirements for connection of large scale onshore wind farms into HV transmission networks. Experiences presented here refer mainly to technical requirements and issues encountered during the process...... of connection into the Eastern Australian power system under the Rules and guidelines set out by AEMC and NEMMCO (AEMO). Where applicable some international practices are also mentioned. Standards are designed to serve as a technical envelope under which wind farm proponents design the plant and maintain...... ongoing technical compliance of the plant during its operational lifetime. This report is designed to provide general technical information for the wind farm connection engineer to be aware of during the process of connection, registration and operation of wind power plants interconnected into the HV TSO...

  9. SNL/CA Facilities Management Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Rabb, David [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Clark, Eva [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2014-12-01

    At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.

  10. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  11. 77 FR 32444 - Minimum Internal Control Standards

    Science.gov (United States)

    2012-06-01

    ... discrepancy between the smart card definition and the patron deposit account standards by eliminating the definitional requirement that smart cards be the only source of account data. Second, it no longer lists... a player. Smart card. A card with embedded integrated circuits that possesses the means to...

  12. 77 FR 58707 - Minimum Internal Control Standards

    Science.gov (United States)

    2012-09-21

    ... industry standard definition of smart card conflicts with this section because it prohibits smart cards... smart card must not be the only source of account data in this section because it must retrieve the data... hours. Shill. An agent financed by the gaming operation and acting as a player. Smart card. A card with...

  13. Linear Design Approach to a Fuzzy Controller

    DEFF Research Database (Denmark)

    Jantzen, Jan

    1999-01-01

    A ball-balancer, basically an inverted pendulum problem, is stabilised by a linear controller. With certain design choices, a fuzzy controller is equivalent to a summation; thus it can replace the linear controller. It can be claimed, that the fuzzy controller performs at least as well...... as the linear controller, since the linear controller is contained in the fuzzy controller. The approach makes it somewhat easier to design a fuzzy controller....

  14. Standardization of green building technologies for environment design

    Directory of Open Access Journals (Sweden)

    Benuzh Andrey

    2016-01-01

    Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

  15. Controller Design Automation for Aeroservoelastic Design Optimization of Wind Turbines

    NARCIS (Netherlands)

    Ashuri, T.; Van Bussel, G.J.W.; Zaayer, M.B.; Van Kuik, G.A.M.

    2010-01-01

    The purpose of this paper is to integrate the controller design of wind turbines with structure and aerodynamic analysis and use the final product in the design optimization process (DOP) of wind turbines. To do that, the controller design is automated and integrated with an aeroelastic simulation

  16. Applicability of the FASTBUS standard to distributed control

    International Nuclear Information System (INIS)

    Deiss, S.R.; Downing, R.W.; Gustavson, D.B.; Larsen, R.S.; Logg, C.A.; Paffrath, L.

    1981-03-01

    The new FASTBUS standard has been designed to provide a framework for distributed processing in both experimental data acquisition and accelerator control. The features of FASTBUS which support distributed control are a priority arbitration scheme which allows intercrate as well as intracrate message flow between processors and slave devices; and a high bandwidth to permit efficient sharing of the data paths by high-speed devices. Sophisticated diagnostic aids permit system-wide error checking and/or correction. Software has been developed for large distributed systems. This consists of a system data base description, and initialization algorithms to allocate address space and establish preferred message routes. A diagnostics package is also being developed, based on an independent Ethernet-like serial link. The paper describes available hardware and software, on-going developments, and current applications

  17. Evolutionary Design of Polynomial Controller

    OpenAIRE

    R. Matousek; S. Lang; P. Minar; P. Pivonka

    2011-01-01

    In the control theory one attempts to find a controller that provides the best possible performance with respect to some given measures of performance. There are many sorts of controllers e.g. a typical PID controller, LQR controller, Fuzzy controller etc. In the paper will be introduced polynomial controller with novel tuning method which is based on the special pole placement encoding scheme and optimization by Genetic Algorithms (GA). The examples will show the perform...

  18. LMI–based robust controller design approach in aircraft multidisciplinary design optimization problem

    Directory of Open Access Journals (Sweden)

    Qinghua Zeng

    2015-07-01

    Full Text Available This article proposes a linear matrix inequality–based robust controller design approach to implement the synchronous design of aircraft control discipline and other disciplines, in which the variation in design parameters is treated as equivalent perturbations. Considering the complicated mapping relationships between the coefficient arrays of aircraft motion model and the aircraft design parameters, the robust controller designed is directly based on the variation in these coefficient arrays so conservative that the multidisciplinary design optimization problem would be too difficult to solve, or even if there is a solution, the robustness of design result is generally poor. Therefore, this article derives the uncertainty model of disciplinary design parameters based on response surface approximation, converts the design problem of the robust controller into a problem of solving a standard linear matrix inequality, and theoretically gives a less conservative design method of the robust controller which is based on the variation in design parameters. Furthermore, the concurrent subspace approach is applied to the multidisciplinary system with this kind of robust controller in the design loop. A multidisciplinary design optimization of a tailless aircraft as example is shown that control discipline can be synchronous optimal design with other discipline, especially this method will greatly reduce the calculated amount of multidisciplinary design optimization and make multidisciplinary design optimization results more robustness of flight performance.

  19. 21 CFR 820.30 - Design controls.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Design controls. 820.30 Section 820.30 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES QUALITY SYSTEM REGULATION Design Controls § 820.30 Design controls. (a) General. (1) Each manufacturer of...

  20. American National Standard: nuclear data sets for reactor design calculations

    International Nuclear Information System (INIS)

    1983-01-01

    This standard identifies and describes the specifications for developing, preparing, and documenting nuclear data sets to be used in reactor design calculations. The specifications include criteria for acceptance of evaluated nuclear data sets, criteria for processing evaluated data and preparation of processed continuous data and averaged data sets, and identification of specific evaluated, processed continuous, and averaged data sets which meet these criteria for specific reactor types

  1. American National Standard nuclear data sets for reactor design calculations

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    A standard is presented which identifies and describes the specifications for developing, preparing, and documenting nuclear data sets to be used in reactor design calculations. The specifications include (a) criteria for acceptance of evaluated nuclear data sets, (b) criteria for processing evaluated data and preparation of processed continuous data and averaged data sets, and (c) identification of specific evaluated, processed continuous, and averaged data sets which meet these criteria for specific reactor types

  2. Communication Standards Suitable for MES Systems Designed for SMES

    Directory of Open Access Journals (Sweden)

    Ondřej WINKLER

    2009-06-01

    Full Text Available A MES (Manufacturing Execution System is a system that large companies use to measure or control critical production activities. Individual parts of this system can be used as a model for development of tools suitable for small and medium enterprises (SMEs. It can demonstrate how manufacturing systems works and which communication standards are usable. The communication standards enable data acquisition, data processing, storing and their conversion for any production report. Furthermore, interfaces for web clients allow displaying the raw or transformed data as a text or a graphic chart. The development of tools for an access to the data retrieved from MES software is described in this paper.

  3. Impact of chemistry on Standard High Solids Vessel Design mixing

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-02

    The plan for resolving technical issues regarding mixing performance within vessels of the Hanford Waste Treatment Plant Pretreatment Facility directs a chemical impact study to be performed. The vessels involved are those that will process higher (e.g., 5 wt % or more) concentrations of solids. The mixing equipment design for these vessels includes both pulse jet mixers (PJM) and air spargers. This study assesses the impact of feed chemistry on the effectiveness of PJM mixing in the Standard High Solids Vessel Design (SHSVD). The overall purpose of this study is to complement the Properties that Matter document in helping to establish an acceptable physical simulant for full-scale testing. The specific objectives for this study are (1) to identify the relevant properties and behavior of the in-process tank waste that control the performance of the system being tested, (2) to assess the solubility limits of key components that are likely to precipitate or crystallize due to PJM and sparger interaction with the waste feeds, (3) to evaluate the impact of waste chemistry on rheology and agglomeration, (4) to assess the impact of temperature on rheology and agglomeration, (5) to assess the impact of organic compounds on PJM mixing, and (6) to provide the technical basis for using a physical-rheological simulant rather than a physical-rheological-chemical simulant for full-scale vessel testing. Among the conclusions reached are the following: The primary impact of precipitation or crystallization of salts due to interactions between PJMs or spargers and waste feeds is to increase the insoluble solids concentration in the slurries, which will increase the slurry yield stress. Slurry yield stress is a function of pH, ionic strength, insoluble solids concentration, and particle size. Ionic strength and chemical composition can affect particle size. Changes in temperature can affect SHSVD mixing through its effect on properties such as viscosity, yield stress, solubility

  4. Guidelines for control room design reviews

    International Nuclear Information System (INIS)

    1981-09-01

    The control room design review is part of a broad program being undertaken by the nuclear industry and the government to ensure consideration of human factors in nuclear power plant design and operation. The purpose of the control room design review described by these guidelines is to (1) review and evaluate the control room workspace, instrumentation, controls, and other equipment from a human factors engineering point of view that takes into account both system demands and operator capabilities; and (2) to identify, assess, and implement control room design modifications that correct inadequate or unsuitable items. The scope of the control room design review described by these guidelines covers the human engineering review of completed control rooms; i.e., operational control rooms or those at that stage of the licensing process where control room design and equipment selection are committed. These guidelines should also be of use during the design process for new control rooms. However, additional analyses to optimize the allocation of functions to man and machine, and further examination of advanced control system technology, are recommended for new control rooms. Guidelines and references for comprehensive system analyses designed to incorporate human factors considerations into the design and development of new control rooms are presented in Appendix B. Where possible, a generic approach to the control room design review process is encouraged; for example, when control room designs are replicated wholly or in part in two or more units. Even when designs are not replicated exactly, generic reviews which can be modified to account for specific differences in particular control rooms should be considered. Industry organizations and owners groups are encouraged to coordinate joint efforts and share data to develop generic approaches to the design review process. The control room design review should accomplish the following specific objectives. To determine

  5. 42 CFR 493.1256 - Standard: Control procedures.

    Science.gov (United States)

    2010-10-01

    ... results are used, statistical parameters (for example, mean and standard deviation) for each batch and lot... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Control procedures. 493.1256 Section 493... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic...

  6. 78 FR 11793 - Minimum Internal Control Standards

    Science.gov (United States)

    2013-02-20

    ....2 What are the definitions for this part? * * * * * Currency cassette. A locked compartment that... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission 25 CFR Part 543 RIN 3141-AA27 Minimum... 590. The rule added a new part to the Commission's regulations establishing Minimum Internal Control...

  7. Mechanical engineers' handbook, design, instrumentation, and controls

    CERN Document Server

    Kutz, Myer

    2015-01-01

    Full coverage of electronics, MEMS, and instrumentation andcontrol in mechanical engineering This second volume of Mechanical Engineers' Handbookcovers electronics, MEMS, and instrumentation and control, givingyou accessible and in-depth access to the topics you'll encounterin the discipline: computer-aided design, product design formanufacturing and assembly, design optimization, total qualitymanagement in mechanical system design, reliability in themechanical design process for sustainability, life-cycle design,design for remanufacturing processes, signal processing, dataacquisition and dis

  8. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans; V Stanley Scown; Rolf Carlson; Shabbir Shamsuddin; George Shaw; Jeff Dagle; Paul W Oman; Jeannine Schmidt

    2005-10-01

    The use of cyber security standards can greatly assist in the protection of critical infrastructure by providing guidelines and requisite imperatives in the implementation of computer-controlled systems. These standards are most effective when the engineers and operators using the standards understand what each of the standards addresses and does not address. This paper provides a review and comparison of ten documents dealing with control system cyber security. It is not meant to be a complete treatment of all applicable standards; rather, this is an exemplary analysis showing the benefits of comparing and contrasting differing documents.

  9. Design requirement on KALIMER control rod assembly duct

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs.

  10. Design requirement on KALIMER control rod assembly duct

    International Nuclear Information System (INIS)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J.

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs

  11. Low power RF circuit design in standard CMOS technology

    CERN Document Server

    Alvarado, Unai; Adín, Iñigo

    2012-01-01

    Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

  12. Simulant Basis for the Standard High Solids Vessel Design

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-30

    The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. The simulant recipes that meet this basis will be provided in a subsequent document.

  13. Prototyping qualitative controllers for fuzzy-logic controller design

    International Nuclear Information System (INIS)

    Bakhtiari, S.; Jabedar-Maralani, P.

    1999-05-01

    Qualitative controls can be designed for linear and nonlinear models with the same computational complexity. At the same time they show the general form of the proper control. These properties can help ease the design process for quantitative controls. In this paper qualitative controls are used as prototypes for the design of linear or nonlinear, and in particular Sugeno-type fuzzy, controls. The LMS identification method is used to approximate the qualitative control with the nearest fuzzy control. The method is applied to the problem of position control in a permanent magnet synchronous motor; moreover, the performance and the robustness of the two controllers are compared

  14. Design of embedded control systems

    National Research Council Canada - National Science Library

    Adamski, M; Karatkevich, Andrei; Węgrzyn, M

    2005-01-01

    ... using some concrete technological base; efficient methods of logic synthesis, test, and verification should be developed for that. Fourth, the task of the communication between the control device and controlled objects (and maybe between different control devices) waits for its solution. All these problems are hard enough and cannot be successfull...

  15. Usability standards meet scenario-based design: challenges and opportunities.

    Science.gov (United States)

    Vincent, Christopher J; Blandford, Ann

    2015-02-01

    The focus of this paper is on the challenges and opportunities presented by developing scenarios of use for interactive medical devices. Scenarios are integral to the international standard for usability engineering of medical devices (IEC 62366:2007), and are also applied to the development of health software (draft standard IEC 82304-1). The 62366 standard lays out a process for mitigating risk during normal use (i.e. use as per the instructions, or accepted medical practice). However, this begs the question of whether "real use" (that which occurs in practice) matches "normal use". In this paper, we present an overview of the product lifecycle and how it impacts on the type of scenario that can be practically applied. We report on the development and testing of a set of scenarios intended to inform the design of infusion pumps based on "real use". The scenarios were validated by researchers and practitioners experienced in clinical practice, and their utility was assessed by developers and practitioners representing different stages of the product lifecycle. These evaluations highlighted previously unreported challenges and opportunities for the use of scenarios in this context. Challenges include: integrating scenario-based design with usability engineering practice; covering the breadth of uses of infusion devices; and managing contradictory evidence. Opportunities included scenario use beyond design to guide marketing, to inform purchasing and as resources for training staff. This study exemplifies one empirically grounded approach to communicating and negotiating the realities of practice. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  16. Mini UAV VTOL control design

    OpenAIRE

    Poinsot, Damien

    2008-01-01

    The present work describes the development of an automatic control system and the investigation of the flight dynamics of fixed-wing micro air vehicles (MAVs) with vertical takeoff and landing (VTOL) capabilities. After describing the flight dynamics model including the prop wash effect over control surfaces, a control strategy is presented to achieve autonomous transition between forward flight and hover flight. Both hardware and software architectures necessary to perform real flight are pr...

  17. Help for the Developers of Control System Cyber Security Standards

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2008-05-01

    A Catalog of Control Systems Security: Recommendations for Standards Developers (Catalog), aimed at assisting organizations to facilitate the development and implementation of control system cyber security standards, has been developed. This catalog contains requirements that can help protect control systems from cyber attacks and can be applied to the Critical Infrastructures and Key Resources of the United States and other nations. The requirements contained in the catalog are a compilation of practices or various industry bodies used to increase the security of control systems from both physical and cyber attacks. They should be viewed as a collection of recommendations to be considered and judiciously employed, as appropriate, when reviewing and developing cyber security standards for control systems. The recommendations in the Catalog are intended to be broad enough to provide any industry using control systems the flexibility needed to develop sound cyber security standards specific to their individual security requirements.

  18. Administrative goals and safety standards for hazard control on forested recreation sites

    Science.gov (United States)

    Lee A. Paine

    1973-01-01

    For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

  19. Evaluation of Standard Concepts Design of Library Interior Physical Environment

    Directory of Open Access Journals (Sweden)

    Debri Harindya Putri

    2018-01-01

    Full Text Available Currently the function of a room is not only used as a shelter, the function of the room itself to be increased as a refreshing or relaxation area for users to follow the development of creativity and technology in the field of design. The comfortable factor becomes the main factor that indicates a successful process of creating a space. No exception library. The nature of library seemed stiff because of its function as a place to read, now can be developed and made into more dynamic with the special design concepts or color patterns used. Libraries can be created a special concept that suits the characteristics of the users themselves. Most users of the library, especially in college libraries are teenagers. Naturally, teenagers like to gather with their friends and we have to facilitate this activity in our library design concept. In addition we can also determine the needs of users through research by questionnaire method. The answers of users can be mapped and drawn conclusions. To explore the research, the author reviewed some literature about library interior design and observed the library of Ma Chung University as a case study. The combined results of the method can be concluded and the discovery of ideal standards of physical environment. So, the library can be made as a comfortable reading environment so as to increased interest in reading behavior and the frequent visits of students in the library

  20. Controller design for Robotic hand through Electroencephalogram

    OpenAIRE

    Pandelidis P.; Kiriazis N.; Orgianelis K.; Koulios N.

    2016-01-01

    - This paper deals with the designing, the construction and the control of a robotic hand via an electroencephalogram sensor. First a robotic device that is able to mimic a real human hand is constructed. A PID controller is designed in order to improve the performance of the robotic arm for grabbing objects. Furthermore, a novel design approach is presented for controlling the motion of the robotic arm using signals produced from an innovative electroencephalogram sensor that detects the con...

  1. Facility-wide synchronization of standard FAIR equipment controllers

    International Nuclear Information System (INIS)

    Rauch, S.; Terpstra, W.; Panschow, W.; Thieme, M.; Prados, C.; Zweig, M.; Kreider, M.; Beck, D.; Bär, R.

    2012-01-01

    The standard equipment controller under development for the new FAIR accelerator facility is the Scalable Control Unit (SCU). It is designed to synchronize and control the actions of up to 12 purpose-built slave cards, connected in a proprietary crate by a parallel backplane. Inter-crate coordination and facility-wide synchronization are a core FAIR requirement and thus precise timing of SCU slave actions is of vital importance. The SCU consists primarily of two components, an x86 COM Express daughter board and a carrier board with an Altera Arria II GX FPGA, interconnected by PCI Express. The x86 receives configuration and set values with which it programs the real-time event-condition-action (ECA) unit in the FPGA. The ECA unit receives event messages via the timing network, which also synchronizes the clocks of all SCUs in the facility using White Rabbit. Matching events trigger actions on the SCU slave cards such as: ramping magnets, triggering kickers, etc. Timing requirements differ depending on the action taken. For softer real-time actions, an interrupt can be generated for complex processing on the x86. Alternatively, the FPGA can directly fire a pulse out a LEMO output or an immediate SCU bus operation. The delay and synchronization achievable in each case differs and this paper examines the timing performance of each to determine which approach is appropriate for the required actions. (author)

  2. Standard-D hydrogen monitoring system, system design description

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1996-01-01

    During most of the year, it is assumed that the vapor space in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty-five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gasses to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gasses from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. The Standard Hydrogen Monitoring System (SHMS) is designed to monitor and quantify the percent hydrogen concentration during these potential gas releases. This document describes the design of the Standard-D Hydrogen Monitoring System, (SHMS-D) and its components as it differs from the original SHMS

  3. Design basis reconstitution for an effective design control program

    International Nuclear Information System (INIS)

    Banerjee, A.K.

    1987-01-01

    Configuration management is a new buzz word in the nuclear power industry. Whatever its definition, everyone agrees that the configuration of a nuclear power plant must be managed effectively. In layman's terms, configuration management means that a plant must be built, operated, and maintained in a manner consistent with its design basis. Thus, control of the design basis is the most important element in any configuration management program. Until recently, the US Nuclear Regulatory Commission's (NRC's) review of design basis focused on the plants that were about to get operating licenses. However, incidents at a few operating nuclear plants and NRC inspections (Safety System Functional Inspection and Safety System Outage Modification Inspection) have indicated weaknesses in older operating plant design basis documentation and design change control programs. Thus, reconstitution of plant design basis has become an important issue. This paper presents the major element of a design basis reconstitution program, which can be an immense undertaking for some of the older operating plants

  4. Design scope and level for standard design certification under a two step licensing process

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Chang Wook; Suh, Nam Duk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2012-08-15

    A small integral reactor SMART (System Integrated Modular Advanced ReacTor), being developed in Korea since late 1990s and targeted to obtaining a standard design approval by the end of 2011, is introduced. The design scope and level for design certification (DC) is well described in the U.S. NRC SECY documents published the early 1990s. However, the documents are valid for a one-step licensing process called a combined operating license (COL) by the U.S. NRC, while Korea still uses a two-step licensing process. Thus, referencing the concept of the SECY documents, we have established the design scope and level for the SMART DC using the contexts of the standard review plan (SRP). Some examples of the results and issues raised during our review are briefly presented in this paper. The same methodology will be applied to other types of reactor under development in Korea, such as future VHTR reactors.

  5. Instructions for submittal and control of FFTF design documents and design related documentation

    International Nuclear Information System (INIS)

    Grush, R.E.

    1976-10-01

    This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

  6. Sawtooth period control strategies and designs for improved performance

    International Nuclear Information System (INIS)

    Witvoet, G.; Steinbuch, M.; De Baar, M.R.; Doelman, N.J.; Westerhof, E.

    2012-01-01

    The sawtooth instability is associated with the triggering of neo-classical tearing modes, core fuelling, α-confinement and the exhaust of thermal helium. Sawtooth control is therefore important for optimal reactor performance in ELMy H-modes. Control schemes for the sawtooth period have been published in the literature, but the systematic design of high-performance controllers (yielding accurate and fast convergent responses) has not been addressed. In this work, three control strategies for high-performance sawtooth control are presented using electron cyclotron current drive (ECCD). Both degrees of freedom of the ECCD actuator will be explored and combined with advanced controller designs. First, the ECCD deposition location is used as a control variable, for which a gain-scheduled feedback controller and static feedforward control is derived. Second, the use of the driven current as a control variable is explored, and a simple controller is designed based on the identified dynamics. In the third approach both control variables are joined in an overall controller design, which enables the combination of high-performance control of the sawtooth period and control of the gyrotron power. Time-domain simulations with a combined Kadomtsev–Porcelli sawtooth model show that each strategy obtains a better closed-loop performance than standard linear feedback techniques on merely the deposition location. (paper)

  7. State Energy Efficiency Resource Standards: Design, Status, and Impacts

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, D.; Zinaman, O.

    2014-05-01

    An energy efficiency resource standard (EERS) is a policy that requires utilities or other entities to achieve a specified amount of energy savings through customer energy efficiency programs within a specified timeframe. EERSs may apply to electricity usage, natural gas usage, or both. This paper provides an overview of the key design features of EERSs for electricity, reviews the variation in design of EERSs across states, and provides an estimate of the amount of savings required by currently specified EERSs in each state. As of December, 2013, 23 states have active and binding EERSs for electricity. We estimate that state EERSs will require annual electricity savings of approximately 8-11% of total projected demand by 2020 in states with EERSs, however the level of savings targeted by the policies varies significantly across states. In addition to the variation in targeted savings, the design of EERSs varies significantly across states leading to differences in the suite of incentives created by the policy, the flexibility of compliance with the policy, the balance of benefits and costs of the policy between producers and consumers, and the certainty with which the policy will drive long-term savings.

  8. 40 CFR 266.105 - Standards to control particulate matter.

    Science.gov (United States)

    2010-07-01

    ...) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.105 Standards to control particulate matter. (a) A boiler or industrial furnace burning hazardous waste may not...

  9. Dosimetry control for radiation processing - basic requirements and standards

    International Nuclear Information System (INIS)

    Ivanova, M.; Tsrunchev, Ts.

    2004-01-01

    A brief review of the basic international codes and standards for dosimetry control for radiation processing (high doses dosimetry), setting up a dosimetry control for radiation processing and metrology control of the dosimetry system is made. The present state of dosimetry control for food processing and the Bulgarian long experience in food irradiation (three irradiation facilities are operational at these moment) are presented. The absence of neither national standard for high doses nor accredited laboratory for calibration and audit of radiation processing dosimetry systems is also discussed

  10. Simple adaptive control system design trades

    NARCIS (Netherlands)

    Mooij, E.

    2017-01-01

    In the design of a Model Reference Adaptive Control system, a reference model serves as the (well-known) basis through which system and user requirements can find their way into the design. By tuning the design parameters, the response of the actual vehicle should track the response of the

  11. Process Design Manual for Nitrogen Control.

    Science.gov (United States)

    Parker, Denny S.; And Others

    This manual presents theoretical and process design criteria for the implementation of nitrogen control technology in municipal wastewater treatment facilities. Design concepts are emphasized through examination of data from full-scale and pilot installations. Design data are included on biological nitrification and denitrification, breakpoint…

  12. Design of multivariable controllers for robot manipulators

    Science.gov (United States)

    Seraji, H.

    1986-01-01

    The paper presents a simple method for the design of linear multivariable controllers for multi-link robot manipulators. The control scheme consists of multivariable feedforward and feedback controllers. The feedforward controller is the minimal inverse of the linearized model of robot dynamics and contains only proportional-double-derivative (PD2) terms. This controller ensures that the manipulator joint angles track any reference trajectories. The feedback controller is of proportional-integral-derivative (PID) type and achieves pole placement. This controller reduces any initial tracking error to zero as desired and also ensures that robust steady-state tracking of step-plus-exponential trajectories is achieved by the joint angles. The two controllers are independent of each other and are designed separately based on the linearized robot model and then integrated in the overall control scheme. The proposed scheme is simple and can be implemented for real-time control of robot manipulators.

  13. Recovery Act: Water Heater ZigBee Open Standard Wireless Controller

    Energy Technology Data Exchange (ETDEWEB)

    Butler, William P. [Emerson Electric Co., St. Louis, MO (United States); Buescher, Tom [Emerson Electric Co., St. Louis, MO (United States)

    2014-04-30

    The objective of Emerson's Water Heater ZigBee Open Standard Wireless Controller is to support the DOE's AARA priority for Clean, Secure Energy by designing a water heater control that levels out residential and small business peak electricity demand through thermal energy storage in the water heater tank.

  14. Standard High Solids Vessel Design De-inventory Simulant Qualification

    Energy Technology Data Exchange (ETDEWEB)

    Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A.M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Linn, Diana T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smoot, Margaret R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-09-12

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant be developed that would represent the de-inventory (residual high-density tank solids cleanout) process. Its basis and target characteristics are defined in 24590-WTP-ES-ENG-16-021 and implemented through PNNL Test Plan TP-WTPSP-132 Rev. 1.0. This document describes the de-inventory Newtonian carrier fluid (DNCF) simulant composition that will satisfy the basis requirement to mimic the density (1.18 g/mL ± 0.1 g/mL) and viscosity (2.8 cP ± 0.5 cP) of 5 M NaOH at 25 °C.1 The simulant viscosity changes significantly with temperature. Therefore, various solution compositions may be required, dependent on the test stand process temperature range, to meet these requirements. Table ES.1 provides DNCF compositions at selected temperatures that will meet the density and viscosity specifications as well as the temperature range at which the solution will meet the acceptable viscosity tolerance.

  15. The study and design of tension controller

    Science.gov (United States)

    Jun, G.; Lamei, X.

    2018-02-01

    Tension control is a wide used technology in areas such as textiles, paper and plastic films. In this article, the tension control system release and winding process is analyzed and the mathematical model of tension control system is established, and a high performance tension controller is designed. In hardware design, STM32F130 single chip microcomputer is used as the control core, which has the characteristics of fast running speed and rich peripheral features. In software design, μC/OS-II operating system is introduced to improve the efficiency of single chip microcomputer, and enhance the independence of each module, and make development and maintenance more convenient. The taper tension control is adopted in the winding part, which can effectively solve the problem of rolling shrinkage. The results show that the tension controller has the characteristics of simple structure, easy operation and stable performance.

  16. Design and Control of the MINDWALKER Exoskeleton

    NARCIS (Netherlands)

    Wang, Shiqian; Wang, Letian; Meijneke, C.; van Asseldonk, Edwin H.F.; Hoellinger, T.; Cheron, G.; Ivanenko, Y.; La Scaleia, V.; Sylos-Labini, F.; Molinari, M.; Tamburella, F.; Pisotta, I.; Thorsteinsson, F.; Ilzkovitz, M.; Gancet, J.; Nevatia, Y.; Hauffe, R.; Zanow, F.; van der Kooij, Herman

    2015-01-01

    Powered exoskeletons can empower paraplegics to stand and walk. Actively controlled hip ab/adduction (HAA) is needed for weight shift and for lateral foot placement to support dynamic balance control and to counteract disturbances in the frontal plane. Here, we describe the design, control, and

  17. Hydraulically powered dissimilar teleoperated system controller design

    International Nuclear Information System (INIS)

    Jansen, J.F.; Kress, R.L.

    1996-01-01

    This paper will address two issues associated with the implementation of a hydraulically powered dissimilar master-slave teleoperated system. These issues are the overall system control architecture and the design of robust hydraulic servo controllers for the position control problem. Finally, a discussion of overall system performance on an actual teleoperated system will be presented

  18. Application of genetic algorithm to control design

    International Nuclear Information System (INIS)

    Lee, Yoon Joon; Cho, Kyung Ho

    1995-01-01

    A classical PID controller is designed by applying the GA (Genetic Algorithm) which searches the optimal parameters through three major operators of reproduction, crossover and mutation under the given constraints. The GA could minimize the designer's interference and the whole design process could easily be automated. In contrast with other traditional PID design methods which allows for the system output responses only, the design with the GA can take account of the magnitude or the rate of change of control input together with the output responses, which reflects the more realistic situations. Compared with other PIDs designed by the traditional methods such as Ziegler and analytic, the PID by the GA shows the superior response characteristics to those of others with the least control input energy

  19. A MODEL AND CONTROLLER REDUCTION METHOD FOR ROBUST CONTROL DESIGN.

    Energy Technology Data Exchange (ETDEWEB)

    YUE,M.; SCHLUETER,R.

    2003-10-20

    A bifurcation subsystem based model and controller reduction approach is presented. Using this approach a robust {micro}-synthesis SVC control is designed for interarea oscillation and voltage control based on a small reduced order bifurcation subsystem model of the full system. The control synthesis problem is posed by structured uncertainty modeling and control configuration formulation using the bifurcation subsystem knowledge of the nature of the interarea oscillation caused by a specific uncertainty parameter. Bifurcation subsystem method plays a key role in this paper because it provides (1) a bifurcation parameter for uncertainty modeling; (2) a criterion to reduce the order of the resulting MSVC control; and (3) a low order model for a bifurcation subsystem based SVC (BMSVC) design. The use of the model of the bifurcation subsystem to produce a low order controller simplifies the control design and reduces the computation efforts so significantly that the robust {micro}-synthesis control can be applied to large system where the computation makes robust control design impractical. The RGA analysis and time simulation show that the reduced BMSVC control design captures the center manifold dynamics and uncertainty structure of the full system model and is capable of stabilizing the full system and achieving satisfactory control performance.

  20. Controller design for Robotic hand through Electroencephalogram

    Directory of Open Access Journals (Sweden)

    Pandelidis P.

    2016-01-01

    Full Text Available - This paper deals with the designing, the construction and the control of a robotic hand via an electroencephalogram sensor. First a robotic device that is able to mimic a real human hand is constructed. A PID controller is designed in order to improve the performance of the robotic arm for grabbing objects. Furthermore, a novel design approach is presented for controlling the motion of the robotic arm using signals produced from an innovative electroencephalogram sensor that detects the concentration of the brain

  1. Applicability of ISO 9001: 2000 standard to design and research activities in nuclear objectives and installations

    International Nuclear Information System (INIS)

    Stamatopol, M.; Patticu, C.

    2001-01-01

    The ISO 9001: 2000 standard contains the results of the latest studies concerning the design and implementation of quality management systems. The continuous improvement of these systems required a new approach, namely, the process-based approach. A process-based model of quality management is presented in terms of client request, input data, management responsibility, resource management, product realisation, measurement / analysis and optimization, product, output data and client request fulfilment. Thus, the quality management system becomes an ensemble of interconnected or interacting processes. Consequently, to implement such a system the necessary processes have to be identified and their ISO 9001: 2000 standard based management ensured. Process based approach also allows better evidencing the input and output data specific to each process. Such an approach grants a wider applicability to the design and research activities in nuclear objectives and installations. This work aims at identifying additional requirements implied in design and research activities in nuclear field, as stipulated in the following standards / documents: - IAEA SG Q8 'Quality assurance in research and development'; - IAEA SG Q10 'Quality assurance in design'; - CAN / CSA N 286.2 - 00 'Design Quality Assurance for Nuclear Power Plants'; CAN 3 - CSA Z 299.1 'Quality Assurance Program - Category 1'; - NQA - 1, SUPPLEMENT 3S-1 'Supplementary requirements for design control'

  2. Conceptual design of multiple parallel switching controller

    International Nuclear Information System (INIS)

    Ugolini, D.; Yoshikawa, S.; Ozawa, K.

    1996-01-01

    This paper discusses the conceptual design and the development of a preliminary model of a multiple parallel switching (MPS) controller. The introduction of several advanced controllers has widened and improved the control capability of nonlinear dynamical systems. However, it is not possible to uniquely define a controller that always outperforms the others, and, in many situations, the controller providing the best control action depends on the operating conditions and on the intrinsic properties and behavior of the controlled dynamical system. The desire to combine the control action of several controllers with the purpose to continuously attain the best control action has motivated the development of the MPS controller. The MPS controller consists of a number of single controllers acting in parallel and of an artificial intelligence (AI) based selecting mechanism. The AI selecting mechanism analyzes the output of each controller and implements the one providing the best control performance. An inherent property of the MPS controller is the possibility to discard unreliable controllers while still being able to perform the control action. To demonstrate the feasibility and the capability of the MPS controller the simulation of the on-line operation control of a fast breeder reactor (FBR) evaporator is presented. (author)

  3. Wind energy systems control engineering design

    CERN Document Server

    Garcia-Sanz, Mario

    2012-01-01

    IntroductionBroad Context and MotivationConcurrent Engineering: A Road Map for EnergyQuantitative Robust ControlNovel CAD Toolbox for QFT Controller DesignOutline Part I: Advanced Robust Control Techniques: QFT and Nonlinear SwitchingIntroduction to QFTQuantitative Feedback TheoryWhy Feedback? QFT OverviewInsight into the QFT TechniqueBenefits of QFTMISO Analog QFT Control SystemIntroductionQFT Method (Single-Loop MISO System)Design Procedure OutlineMinimum-Phase System Performance SpecificationsJ LTI Plant ModelsPlant Templates of P?(s), P( j_i )Nominal PlantU-Contour (Stability Bound)Trackin

  4. Design Robust Controller for Rotary Kiln

    Directory of Open Access Journals (Sweden)

    Omar D. Hernández-Arboleda

    2013-11-01

    Full Text Available This paper presents the design of a robust controller for a rotary kiln. The designed controller is a combination of a fractional PID and linear quadratic regulator (LQR, these are not used to control the kiln until now, in addition robustness criteria are evaluated (gain margin, phase margin, strength gain, rejecting high frequency noise and sensitivity applied to the entire model (controller-plant, obtaining good results with a frequency range of 0.020 to 90 rad/s, which contributes to the robustness of the system.

  5. Esthetic outcomes in relation to implant-abutment interface design following a standardized treatment protocol in a multicenter randomized controlled trial--a cohort of 12 cases at 1-year follow-up.

    Science.gov (United States)

    McGuire, Michael K; Scheyer, Todd; Ho, Daniel K; Stanford, Clark M; Feine, Jocelyne S; Cooper, Lyndon F

    2015-01-01

    The design of an implant-abutment interface may have an impact on the peri-implant soft tissue esthetics. In an ongoing randomized controlled trial (RCT) with 141 participants, the authors evaluated the peri-implant tissue responses around three different implant-abutment interface designs used to replace single teeth in the esthetic zone. The aim of this report is to describe the treatment protocol utilized in this ongoing RCT by (1) demonstrating in detail a clinical case treated under this protocol and (2) reporting peri-implant soft tissue responses in a cohort of 12 representative cases from the RCT at 1-year follow-up. Male and female adults requiring single implants in the anterior maxilla were enrolled in the RCT according to the study protocol. Five months following any required extraction and/or socket bone grafting/ridge augmentation, one of the following three implant-abutment interfaces was placed and immediately provisionalized: (1) conical interface (CI; OsseoSpeed, Dentsply Implants), n = 4; (2) flat-to-flat interface (FI; NobelSpeedy Replace, Nobel Biocare), n = 4; or (3) platform-switch interface (PS; NanoTite Certain Prevail, Biomet 3i), n = 4. Twelve weeks later, definitive crowns were delivered. Throughout the treatment, peri-implant buccal gingival zenith height and mesial/distal papilla height were measured on stereotactic device photographs, and pink esthetic scores (PES) were determined. The demographics of the participants in each of the three implant-abutment interface groups were very similar. All 12 study sites had ideal ridge form with a minimum width of 5.5 mm following implant site development performed according to the described treatment protocol. Using this treatment protocol for single-tooth replacement in the anterior maxilla, the clinicians were able to obtain esthetic peri-implant soft tissue outcomes with all three types of implant-abutment interface designs at 1-year follow-up as shown by the Canfield data and PES. The

  6. 75 FR 52860 - Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

    Science.gov (United States)

    2010-08-30

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 21 Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando Helicopter Airways (OHA), Inc... Existence of Proposed Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

  7. Innovating cystic fibrosis clinical trial designs in an era of successful standard of care therapies.

    Science.gov (United States)

    VanDevanter, Donald R; Mayer-Hamblett, Nicole

    2017-11-01

    Evolving cystic fibrosis 'standards of care' have influenced recent cystic fibrosis clinical trial designs for new therapies; care additions/improvements will require innovative trial designs to maximize feasibility and efficacy detection. Three cystic fibrosis therapeutic areas (pulmonary exacerbations, Pseudomonas aeruginosa airway infections, and reduced cystic fibrosis transmembrane conductance regulator [CFTR] protein function) differ with respect to the duration for which recognized 'standards of care' have been available. However, developers of new therapies in all the three areas are affected by similar challenges: standards of care have become so strongly entrenched that traditional placebo-controlled studies in cystic fibrosis populations likely to benefit from newer therapies have become less and less feasible. Today, patients/clinicians are more likely to entertain participation in active-comparator trial designs, that have substantial challenges of their own. Foremost among these are the selection of 'valid' active comparator(s), estimation of a comparator's current clinical efficacy (required for testing noninferiority hypotheses), and effective blinding of commercially available comparators. Recent and future cystic fibrosis clinical trial designs will have to creatively address this collateral result of successful past development of effective cystic fibrosis therapies: patients and clinicians are much less likely to accept simple, placebo-controlled studies to evaluate future therapies.

  8. Condominium Design: Good and Bad Noise Control.

    Science.gov (United States)

    Hargens, C. W.; Schutz, Victor K.

    This paper discusses pitfalls in condominium design and the incorpoation of related noise control problems into classroom situations. Two case studies are provided, and a list of architectural noise problems found in many condominiums is included. (CP)

  9. Standard-B Hydrogen Monitoring System, system design description

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1995-01-01

    During most of the year, it is assumed that the vapor in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gases to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gases from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. This document describes the design of the Standard-B Hydrogen Monitoring System, (SHMS) and its components as it differs from the original SHMS. The differences are derived from changes made to improve the system performance but not implemented in all the installed enclosures

  10. Reference design for the standard mirror hybrid reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bender, D.J.; Fink, J.H.; Galloway, T.R.; Kastenberg, W.E.; Lee, J.D.; Devoto, R.S.; Neef, W.S. Jr.; Schultz, K.R.; Culver, D.W.; Rao, S.B.; Rao, S.R.

    1978-05-22

    This report describes the results of a two-year study by Lawrence Livermore Laboratory and General Atomic Co. to develop a conceptual design for the standard (minimum-B) mirror hybrid reactor. The reactor parameters have been chosen to minimize the cost of producing nuclear fuel (/sup 239/Pu) for consumption in fission power reactors (light water reactors). The deuterium-tritium plasma produces approximately 400 MW of fusion power with a plasma Q of 0.64. The fast-fission blanket, which is fueled with depleted uranium and lithium, generates sufficient tritium to run the reactor, has a blanket energy multiplication of M = 10.4, and has a net fissile breeding ratio of Pu/n = 1.51. The reactor has a net electrical output of 600 MWe, a fissile production of 2000 kg of plutonium per year (at a capacity factor of 0.74), and a net plant efficiency of 0.18. The plasma-containment field is generated by a Yin-Yang magnet using NbTi superconductor, and the neutral beam system uses positive-ion acceleration with beam direct conversion. The spherical blanket is based on gas-cooled fast reactor technology. The fusion components, blanket, and primary heat-transfer loop components are all contained within a prestressed-concrete reactor vessel, which provides magnet restraint and supports the primary heat-transfer loop and the blanket.

  11. Reference design for the standard mirror hybrid reactor

    International Nuclear Information System (INIS)

    Bender, D.J.; Fink, J.H.; Galloway, T.R.; Kastenberg, W.E.; Lee, J.D.; Devoto, R.S.; Neef, W.S. Jr.; Schultz, K.R.; Culver, D.W.; Rao, S.B.; Rao, S.R.

    1978-01-01

    This report describes the results of a two-year study by Lawrence Livermore Laboratory and General Atomic Co. to develop a conceptual design for the standard (minimum-B) mirror hybrid reactor. The reactor parameters have been chosen to minimize the cost of producing nuclear fuel ( 239 Pu) for consumption in fission power reactors (light water reactors). The deuterium-tritium plasma produces approximately 400 MW of fusion power with a plasma Q of 0.64. The fast-fission blanket, which is fueled with depleted uranium and lithium, generates sufficient tritium to run the reactor, has a blanket energy multiplication of M = 10.4, and has a net fissile breeding ratio of Pu/n = 1.51. The reactor has a net electrical output of 600 MWe, a fissile production of 2000 kg of plutonium per year (at a capacity factor of 0.74), and a net plant efficiency of 0.18. The plasma-containment field is generated by a Yin-Yang magnet using NbTi superconductor, and the neutral beam system uses positive-ion acceleration with beam direct conversion. The spherical blanket is based on gas-cooled fast reactor technology. The fusion components, blanket, and primary heat-transfer loop components are all contained within a prestressed-concrete reactor vessel, which provides magnet restraint and supports the primary heat-transfer loop and the blanket

  12. Basic design of beamline and polarization control

    International Nuclear Information System (INIS)

    Watanabe, M.

    2006-01-01

    The basic concept of synchrotron radiation beamlines for' vacuum ultraviolet and X-ray experiments has been introduced to beginning users and designers of beamlines. The beamline defined here is composed of a front end, pre-mirrors, and a monochromator with refocusing mirrors, which are connected by beam pipes, providing monochromatic light for the experiments. Firstly, time characteristics of the synchrotron radiation are briefly reviewed. Secondly, the basic technology is introduced as the fundamental knowledge required to both users and designers. The topics are photoabsorption by air and solids, front ends and beam pipes, mirrors, monochromators, and filters. Thirdly, the design consideration is described mainly for the designers. The topics are design principle, principle of ray tracing, optical machinery and control, and vacuum. Fourthly, polarization control is considered. The topics are polarizers, polarization diagnosis of beamline, and circularly-polarized light generation. Finally, a brief summary is given introducing some references for further knowledge of the user's and the designers. (authors)

  13. Model predictive controller design of hydrocracker reactors

    OpenAIRE

    GÖKÇE, Dila

    2014-01-01

    This study summarizes the design of a Model Predictive Controller (MPC) in Tüpraş, İzmit Refinery Hydrocracker Unit Reactors. Hydrocracking process, in which heavy vacuum gasoil is converted into lighter and valuable products at high temperature and pressure is described briefly. Controller design description, identification and modeling studies are examined and the model variables are presented. WABT (Weighted Average Bed Temperature) equalization and conversion increase are simulate...

  14. New trends in designing NPP control boards

    International Nuclear Information System (INIS)

    Kondrat'ev, V.V.

    1981-01-01

    A short analytical summary of the latest developments and future trends in designing NPP control boards is given. The designs of the Westinghause and the Hynkley-Point NPP control boards are described in detail. The essence of the advanced control board concept consists , firstly, in expanded use of computer-controlled displays for the sake of reducing the content of unimportant information presented to an operator, and, secondary, in better account of human possibilities to convert the NPP operation information into a more suitable form. An enlarged use of the direct digital reactor control utilizing microprocessors is expected. Besides, the employment of full-scale control board mock-ups and information desks as well as testing newly-developed control boards at computer reactor simulators are concluded to be used at all-growing rate [ru

  15. Control room philosophy: Principles of control room design and control room work

    International Nuclear Information System (INIS)

    Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla

    2006-01-01

    In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages

  16. Integrated Design Tools for Embedded Control Systems

    NARCIS (Netherlands)

    Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Karelse, F.

    2001-01-01

    Currently, computer-based control systems are still being implemented using the same techniques as 10 years ago. The purpose of this project is the development of a design framework, consisting of tools and libraries, which allows the designer to build high reliable heterogeneous real-time embedded

  17. Biological Systems Thinking for Control Engineering Design

    Directory of Open Access Journals (Sweden)

    D. J. Murray-Smith

    2004-01-01

    Full Text Available Artificial neural networks and genetic algorithms are often quoted in discussions about the contribution of biological systems thinking to engineering design. This paper reviews work on the neuromuscular system, a field in which biological systems thinking could make specific contributions to the development and design of automatic control systems for mechatronics and robotics applications. The paper suggests some specific areas in which a better understanding of this biological control system could be expected to contribute to control engineering design methods in the future. Particular emphasis is given to the nonlinear nature of elements within the neuromuscular system and to processes of neural signal processing, sensing and system adaptivity. Aspects of the biological system that are of particular significance for engineering control systems include sensor fusion, sensor redundancy and parallelism, together with advanced forms of signal processing for adaptive and learning control

  18. Design control requirements for medical device development.

    Science.gov (United States)

    Kinsel, David

    2012-01-01

    Medical devices used in the United States must comply with federal regulations established to ensure that specified requirements have been met. The article will focus on 1 of 14 elements of the Quality System Regulation (QSR)-Design Controls. A high-level overview of these design control requirements is provided to increase awareness of the device development process and provide a basis for mutual understanding for continued dialogue with end users. Design control requirements were established by the US Food and Drug Administration (FDA) as an element of the QSR in 1996. Device manufacturers are required to have a quality management system (QMS) to ensure their devices are safe and effective. The QMS is established by writing operating procedures to achieve consistent application of the methods used to control quality and comply with regulatory requirements. The FDA has the responsibility to audit device manufacturers for compliance with the regulation. The requirements of the QSR and the resulting device design control procedures lend themselves to what is commonly known as the waterfall development process. This iterative process results in documented evidence that is defined in the QSR as the Design History File. This record of development is essential for managing the product life cycle. The elements and purpose of the design control process will be presented to illuminate today's development environment. Collaboration between device developers and the practitioner is essential for improving clinical outcomes and reducing time to market of innovative devices.

  19. 36 CFR 1281.4 - What are the architectural and design standards for Presidential libraries?

    Science.gov (United States)

    2010-07-01

    ... § 1281.4 What are the architectural and design standards for Presidential libraries? The Archivist is required by 44 U.S.C. 2112(a)(2) to promulgate architectural and design standards for Presidential libraries. The standards address the architectural, design, and structural requirements of a new...

  20. C. F. Braun. Standard turbine island design, safety analysis report

    International Nuclear Information System (INIS)

    1974-01-01

    A standard turbine island used with a BWR is described. It consists of the turbine-generator; steam system; condensate storage, cleanup, and transfer systems; control and instrumentation; water treatment plant; make-up demineralizer; potable and waste water systems; and a compressed air system. The turbine-generator is a tandem-compound nuclear-type turbine with one double-flow high-pressure section and a six-flow low-pressure section in three double-flow low-pressure casings. The turbine is direct connected to an 1800 rpm synchronous a-c generator. A combined moisture separator and two-stage reheater is provided. The main steam system delivers the steam generated in a BWR to the main turbine stop valves. The condensate system maintains proper water inventory. Protective features prevent loss of the system due to electrical failure of a component and isolates faults to ensure continuity of a power supply from alternate sources. (U.S.)

  1. [Evaluation standards and application for photography of schistosomiasis control theme].

    Science.gov (United States)

    Chun-Li, Cao; Qing-Biao, Hong; Jing-Ping, Guo; Fang, Liu; Tian-Ping, Wang; Jian-Bin, Liu; Lin, Chen; Hao, Wang; You-Sheng, Liang; Jia-Gang, Guo

    2018-02-26

    To set up and apply the evaluation standards for photography of schistosomiasis control theme, so as to offer the scientific advice for enriching the health information carrier of schistosomiasis control. Through the literature review and expert consultation, the evaluation standard for photography of schistosomiasis control theme was formulated. The themes were divided into 4 projects, such as new construction, natural scenery, working scene, and control achievements. The evaluation criteria of the theme photography were divided into the theme (60%), photographic composition (15%), focus exposure (15%), and color saturation (10%) . A total of 495 pictures (sets) from 59 units with 77 authors were collected from schistosomiasis epidemic areas national wide. After the first-step screening and second-step evaluation, the prizes of 3 themes of control achievements and new construction, working scene, and natural scenery were selected, such as 6 pictures of first prize, 12 pictures of second prize, 18 pictures of third prize, and 20 pictures of honorable prize. The evaluation standards of theme photography should be taken into the consideration of the technical elements of photography and the work specification of schistosomiasis prevention and control. In order to improve the ability of records for propaganda purpose of schistosomiasis control and better play a role of guiding correct propaganda, the training and guidance of photography of professionals should be carried out.

  2. Controlled air incinerator conceptual design study

    International Nuclear Information System (INIS)

    1982-01-01

    This report presents a conceptual design study for a controlled air incinerator facility for incineration of low level combustible waste at Three Mile Island Unit 2 (TMI-2). The facility design is based on the use of a Helix Process Systems controlled air incinerator. Cost estimates and associated engineering, procurement, and construction schedules are also provided. The cost estimates and schedules are presented for two incinerator facility designs, one with provisions for waste ash solidification, the other with provisions for packaging the waste ash for transport to an undefined location

  3. Analysis and design of hybrid control systems

    Energy Technology Data Exchange (ETDEWEB)

    Malmborg, J.

    1998-05-01

    Different aspects of hybrid control systems are treated: analysis, simulation, design and implementation. A systematic methodology using extended Lyapunov theory for design of hybrid systems is developed. The methodology is based on conventional control designs in separate regions together with a switching strategy. Dynamics are not well defined if the control design methods lead to fast mode switching. The dynamics depend on the salient features of the implementation of the mode switches. A theorem for the stability of second order switching together with the resulting dynamics is derived. The dynamics on an intersection of two sliding sets are defined for two relays working on different time scales. The current simulation packages have problems modeling and simulating hybrid systems. It is shown how fast mode switches can be found before or during simulation. The necessary analysis work is a very small overhead for a modern simulation tool. To get some experience from practical problems with hybrid control the switching strategy is implemented in two different software environments. In one of them a time-optimal controller is added to an existing PID controller on a commercial control system. Successful experiments with this hybrid controller shows the practical use of the method 78 refs, 51 figs, 2 tabs

  4. Design, modeling and control of nanopositioning systems

    CERN Document Server

    Fleming, Andrew J

    2014-01-01

    Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (...

  5. Materials for Consideration in Standardized Canister Design Activities.

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, Charles R.; Ilgen, Anastasia Gennadyevna; Enos, David George; Teich-McGoldrick, Stephanie; Hardin, Ernest

    2014-10-01

    This document identifies materials and material mitigation processes that might be used in new designs for standardized canisters for storage, transportation, and disposal of spent nuclear fuel. It also addresses potential corrosion issues with existing dual-purpose canisters (DPCs) that could be addressed in new canister designs. The major potential corrosion risk during storage is stress corrosion cracking of the weld regions on the 304 SS/316 SS canister shell due to deliquescence of chloride salts on the surface. Two approaches are proposed to alleviate this potential risk. First, the existing canister materials (304 and 316 SS) could be used, but the welds mitigated to relieve residual stresses and/or sensitization. Alternatively, more corrosion-resistant steels such as super-austenitic or duplex stainless steels, could be used. Experimental testing is needed to verify that these alternatives would successfully reduce the risk of stress corrosion cracking during fuel storage. For disposal in a geologic repository, the canister will be enclosed in a corrosion-resistant or corrosion-allowance overpack that will provide barrier capability and mechanical strength. The canister shell will no longer have a barrier function and its containment integrity can be ignored. The basket and neutron absorbers within the canister have the important role of limiting the possibility of post-closure criticality. The time period for corrosion is much longer in the post-closure period, and one major unanswered question is whether the basket materials will corrode slowly enough to maintain structural integrity for at least 10,000 years. Whereas there is extensive literature on stainless steels, this evaluation recommends testing of 304 and 316 SS, and more corrosion-resistant steels such as super-austenitic, duplex, and super-duplex stainless steels, at repository-relevant physical and chemical conditions. Both general and localized corrosion testing methods would be used to

  6. Actuator topology design using the controllability Gramian

    DEFF Research Database (Denmark)

    Alves da Silveira, Otávio Augusto; Ono Fonseca, Jun Sérgio; Santos, Ilmar

    2015-01-01

    in modal space. A topology optimization was formulated to distribute two material phases in the domain: a passive linear elastic material and an active linear piezoelectric material, with a volume constraint in the latter. The objective function is the trace of the controllability Gramian of a LQR control......This work develops a methodology for the optimal design of actuators for the vibration control of flexible structures. The objective is the maximization of a measure of the controllability Gramian. The test case is the embedding of piezoelectric inserts in elastic structures for vibration control...

  7. Computer-aided control system design

    International Nuclear Information System (INIS)

    Lebenhaft, J.R.

    1986-01-01

    Control systems are typically implemented using conventional PID controllers, which are then tuned manually during plant commissioning to compensate for interactions between feedback loops. As plants increase in size and complexity, such controllers can fail to provide adequate process regulations. Multivariable methods can be utilized to overcome these limitations. At the Chalk River Nuclear Laboratories, modern control systems are designed and analyzed with the aid of MVPACK, a system of computer programs that appears to the user like a high-level calculator. The software package solves complicated control problems, and provides useful insight into the dynamic response and stability of multivariable systems

  8. Robust Structured Control Design via LMI Optimization

    DEFF Research Database (Denmark)

    Adegas, Fabiano Daher; Stoustrup, Jakob

    2011-01-01

    This paper presents a new procedure for discrete-time robust structured control design. Parameter-dependent nonconvex conditions for stabilizable and induced L2-norm performance controllers are solved by an iterative linear matrix inequalities (LMI) optimization. A wide class of controller...... structures including decentralized of any order, fixed-order dynamic output feedback, static output feedback can be designed robust to polytopic uncertainties. Stability is proven by a parameter-dependent Lyapunov function. Numerical examples on robust stability margins shows that the proposed procedure can...

  9. Matlab as a robust control design tool

    Science.gov (United States)

    Gregory, Irene M.

    1994-01-01

    This presentation introduces Matlab as a tool used in flight control research. The example used to illustrate some of the capabilities of this software is a robust controller designed for a single stage to orbit air breathing vehicles's ascent to orbit. The global requirements of the controller are to stabilize the vehicle and follow a trajectory in the presence of atmospheric disturbances and strong dynamic coupling between airframe and propulsion.

  10. Control Design of a Nonlinear Controller to Stabilize the Nonlinear ...

    African Journals Online (AJOL)

    inyangs

    AQM) scheme employing .... A nonlinear control design is considered for application in this case, so that when there is any change in network .... shows that the system is asymptotically stable with a negative definite solution in equation (14).

  11. Controller Architecture Design for MMC-HVDC

    Directory of Open Access Journals (Sweden)

    ZHANG, B.

    2014-05-01

    Full Text Available Compared with high voltage direct current (HVDC, the primary and secondary systems of modular multilevel converter based HVDC (MMC-HVDC are complicated. And the characteristics of the control system determine the properties of the MMC-HVDC system to a certain extent. This paper investigates the design of control architecture. First, the structure and parameters of the 21-level MMC-HVDC are designed. Second, the framework of the control system is studied in details and a complete control system is established. The communication mode and content are built between each layer, and the control system program is developed and debugged. Then The steady state test platform of the sub-module and the relevant control system are designed. Finally, the steady-state tests and the system test of the physical MMC-HVDC simulation system are conducted, which prove that the SMC can control the sub-module (SM efficiently, and the control system could realize efficient start and stop of the physical system. Meanwhile, the capacitor voltage balance between the sub-modules and the basic fault protection and control of the DC voltage and power are verified to be effective.

  12. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, Max H.; Walker, Iain S.

    2011-04-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outdoor pollutant levels are high, the importance of minimizing energy use particularly during times of peak electricity demand, and how the energy used to condition air as part of ventilation system operation changes with outdoor conditions. Dynamic control of ventilation systems can provide ventilation equivalent to or better than what is required by standards while minimizing energy costs and can also add value by shifting load during peak times and reducing intake of outdoor air contaminants. This article describes the logic that enables dynamic control of whole-house ventilation systems to meet the intent of ventilation standards and demonstrates the dynamic ventilation system control concept through simulations and field tests of the Residential Integrated Ventilation-Energy Controller (RIVEC).

  13. Job Grading Standard for Electric Power Controller WG-5407.

    Science.gov (United States)

    Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

    The standard is used to grade nonsupervisory jobs involved in controlling the generation or distribution of electric power. The jobs are located at power generating plants, power distribution centers, and substations. The work requires ability to anticipate load changes due to work schedules, weather, and other variables, in order to engage or cut…

  14. Effect of standards on new equipment design by new international standards and industry restraints

    Science.gov (United States)

    Endelman, Lincoln L.

    1991-01-01

    The use of international standards to further trade is one of the objectives of creating a standard. By having form fit and function compatible the free interchange of manufactured goods can be handled without hindrance. Unfortunately by setting up standards that are peculiar to a particular country or district it is possible to exclude competition from a group of manufacturers. A major effort is now underway to develop international laser standards. In the May I 990 issue of Laser Focus World Donald R. Johnson the director of industrial technology services for the National Institute of Standards and Technology (NIST formerly the National Bureau of Standards) is quoted as follows: " The common means of protectionism has been through certification for the market place. " The article goes on to say " Mr. Johnson expects this tradition to continue and that the new European Community (EC) will demand not just safety standards but performance standards as well. . . . the American laser industry must move very quickly on this issue or risk being left behind the European standards bandwagon. " The article continues laser companies must get involved in the actual standards negotiating process if they are to have a say in future policy. A single set of standards would reduce the need to repeatedly recalibrate products for different national markets. " As a member of ISO TC-72 SC9 I am

  15. [Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

    Science.gov (United States)

    Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

    2017-12-01

    The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

  16. Embedded FIR filter design for real-time refocusing using a standard plenoptic video camera

    Science.gov (United States)

    Hahne, Christopher; Aggoun, Amar

    2014-03-01

    A novel and low-cost embedded hardware architecture for real-time refocusing based on a standard plenoptic camera is presented in this study. The proposed layout design synthesizes refocusing slices directly from micro images by omitting the process for the commonly used sub-aperture extraction. Therefore, intellectual property cores, containing switch controlled Finite Impulse Response (FIR) filters, are developed and applied to the Field Programmable Gate Array (FPGA) XC6SLX45 from Xilinx. Enabling the hardware design to work economically, the FIR filters are composed of stored product as well as upsampling and interpolation techniques in order to achieve an ideal relation between image resolution, delay time, power consumption and the demand of logic gates. The video output is transmitted via High-Definition Multimedia Interface (HDMI) with a resolution of 720p at a frame rate of 60 fps conforming to the HD ready standard. Examples of the synthesized refocusing slices are presented.

  17. SEDIMENT TOXICITY ASSESSMENT: COMPARISON OF STANDARD AND NEW TESTING DESIGNS

    Science.gov (United States)

    Standard methods of sediment toxicity testing are fairly well accepted; however, as with all else, evolution of these methods is inevitable. We compared a standard ASTM 10-day amphipod toxicity testing method with smaller, 48- and 96-h test methods using very toxic and reference ...

  18. Bangbang controller design and implementation for EAST vertical instability control

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yuehang, E-mail: wagn8901@mail.ustc.edu.cn [University of Science and Technology of China, Hefei (China); Xiao, Bingjia, E-mail: bjxiao@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science and Technology of China, Hefei (China); Liu, Lei, E-mail: liulei@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Yuan, Qiping, E-mail: qpyuan@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2016-11-15

    Highlights: • The linearized plasma vertical response model is designed and analysed. • The Bangbang controller for EAST vertical displacement is designed. • The Bangbang controller is optimized for time delay of control system. • We investigate efficacy of Bangbang controller with simulations. • Performance of the controller is roughly given by experiments. - Abstract: In the EAST 2014 campaign, a new internal coil (IC) power supply was used in order to enhance the control over the plasma’s vertical instabilities. The IC power supply now allows for current and voltage working modes with much higher peak voltages and currents and faster response time. In comparison the previous power supply only allowed for the current mode. A Bangbang and PID composite controller has been designed for the voltage mode based on optimal control theory and the RZIP rigid plasma response model. This paper will demonstrate that faster and enhanced controllability are realized with the combination of Bangbang and PID controller. For the large z position drift, the Bangbang controller will export the maximum voltage to achieve much faster power supply response and slow the vertical displacement events (VDEs). The PID controller is used for the small z drifts which will finally stabilize the VDEs with minimum z position oscillation. Furthermore, to evaluate the time latency of this control system and power supply, the stability and performance of the closed loop were simulated and analysed. This controller was finally implementation and test on EAST using the Quasi-snowflake shape which achieved growth rates of 500 s{sup −1}. This paper shows that the new power supply using the bangbang + PID controller can significantly enhance the control over vertical instabilities.

  19. Towards practical control design using neural computation

    Science.gov (United States)

    Troudet, Terry; Garg, Sanjay; Mattern, Duane; Merrill, Walter

    1991-01-01

    The objective is to develop neural network based control design techniques which address the issue of performance/control effort tradeoff. Additionally, the control design needs to address the important issue if achieving adequate performance in the presence of actuator nonlinearities such as position and rate limits. These issues are discussed using the example of aircraft flight control. Given a set of pilot input commands, a feedforward net is trained to control the vehicle within the constraints imposed by the actuators. This is achieved by minimizing an objective function which is the sum of the tracking errors, control input rates and control input deflections. A tradeoff between tracking performance and control smoothness is obtained by varying, adaptively, the weights of the objective function. The neurocontroller performance is evaluated in the presence of actuator dynamics using a simulation of the vehicle. Appropriate selection of the different weights in the objective function resulted in the good tracking of the pilot commands and smooth neurocontrol. An extension of the neurocontroller design approach is proposed to enhance its practicality.

  20. Control vocabulary software designed for CMIP6

    Science.gov (United States)

    Nadeau, D.; Taylor, K. E.; Williams, D. N.; Ames, S.

    2016-12-01

    The Coupled Model Intercomparison Project Phase 6 (CMIP6) coordinates a number of intercomparison activities and includes many more experiments than its predecessor, CMIP5. In order to organize and facilitate use of the complex collection of expected CMIP6 model output, a standard set of descriptive information has been defined, which must be stored along with the data. This standard information enables automated machine interpretation of the contents of all model output files. The standard metadata is stored in compliance with the Climate and Forecast (CF) standard, which ensures that it can be interpreted and visualized by many standard software packages. Additional attributes (not standardized by CF) are required by CMIP6 to enhance identification of models and experiments, and to provide additional information critical for interpreting the model results. To ensure that CMIP6 data complies with the standards, a python program called "PrePARE" (Pre-Publication Attribute Reviewer for the ESGF) has been developed to check the model output prior to its publication and release for analysis. If, for example, a required attribute is missing or incorrect (e.g., not included in the reference CMIP6 controlled vocabularies), then PrePare will prevent publication. In some circumstances, missing attributes can be created or incorrect attributes can be replaced automatically by PrePARE, and the program will warn users about the changes that have been made. PrePARE provides a final check on model output assuring adherence to a baseline conformity across the output from all CMIP6 models which will facilitate analysis by climate scientists. PrePARE is flexible and can be easily modified for use by similar projects that have a well-defined set of metadata and controlled vocabularies.

  1. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    International Nuclear Information System (INIS)

    Randle, D.C.

    2000-01-01

    The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I andC) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I andC and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I andC systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I andC systems, the subsurface repository design also contains systems related to voice and video communications. The components for each of these systems will be distributed and linked over voice and video communication networks throughout the subsurface facility. The scope and primary objectives of this design analysis are to: (1) Identify preliminary system-level functions and interfaces (Section 6.2). (2) Examine the overall system complexity and determine how and on what levels the engineered process systems will be monitored

  2. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    Energy Technology Data Exchange (ETDEWEB)

    D.C. Randle

    2000-01-07

    The primary purpose of this document is to develop a preliminary high-level functional and physical control system architecture for the potential repository at Yucca Mountain. This document outlines an overall control system concept that encompasses and integrates the many diverse process and communication systems being developed for the subsurface repository design. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The Subsurface Repository Integrated Control System design will be composed of a series of diverse process systems and communication networks. The subsurface repository design contains many systems related to instrumentation and control (I&C) for both repository development and waste emplacement operations. These systems include waste emplacement, waste retrieval, ventilation, radiological and air monitoring, rail transportation, construction development, utility systems (electrical, lighting, water, compressed air, etc.), fire protection, backfill emplacement, and performance confirmation. Each of these systems involves some level of I&C and will typically be integrated over a data communications network throughout the subsurface facility. The subsurface I&C systems will also interface with multiple surface-based systems such as site operations, rail transportation, security and safeguards, and electrical/piped utilities. In addition to the I&C systems, the subsurface repository design also contains systems related to voice and video communications. The components for each of these systems will be distributed and linked over voice and video communication networks throughout the subsurface facility. The scope and primary objectives of this design analysis are to: (1) Identify preliminary system-level functions and interfaces (Section 6.2). (2) Examine the overall system complexity and determine how and on what levels the engineered process systems will be monitored, controlled, and

  3. Unfalsified Control; Application to automatic flight control system design

    Directory of Open Access Journals (Sweden)

    Adrian-Mihail STOICA

    2011-09-01

    Full Text Available Unfalsified Control Theory has been developed to provide a way for avoiding modeling uncertainties in controller design. It belongs to the class of control methods called Adaptive Supervisory Switching Control, which work by introducing in the control scheme a supervisory unit which chooses, from a set of candidate controllers the one most suited for the current plant. Unfalsified Control works by using a switching logic that dispenses with the need for a-priori knowledge of the dynamic model. At discrete moments of time, using the input/output data recorded up to that point, the supervisory calculates for each candidate controller a performance index, and compares it to a given threshold. Controllers surpassing that threshold are removed from the candidate controller set. This process is called falsification. If the controller in the loop is one such falsified controller it is replaced. In this paper we investigate the suitability of this method for aeronautical control applications. We review the theory behind this control scheme and adapt it to the case of controlling a fighter aircraft. We also provide a case study, where we test this control scheme on a simulated fighter aircraft.

  4. The ISABELLE Control System: Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Humphrey, J. W.

    1979-01-01

    ISABELLE is a Department of Energy funded proton accelerator/storage ring being built at Brookhaven National Laboratory (Upton, Long Island, New York). It is large (3.8 km circumference) and complicated (approx. 30,000 monitor and control variables). It is based on superconducting technology. Following the example of previous accelerators, ISABELLE will be operated from a single control center. The control system will be distributed and will incorporate a local computer network. An overview of the conceptual design of the ISABELLE control system will be presented.

  5. Infection control in design and construction work.

    Science.gov (United States)

    Collinge, William H

    2015-01-01

    To clarify how infection control requirements are represented, communicated, and understood in work interactions through the medical facility construction project life cycle. To assist project participants with effective infection control management by highlighting the nature of such requirements and presenting recommendations to aid practice. A 4-year study regarding client requirement representation and use on National Health Service construction projects in the United Kingdom provided empirical evidence of infection control requirement communication and understanding through design and construction work interactions. An analysis of construction project resources (e.g., infection control regulations and room data sheets) was combined with semi-structured interviews with hospital client employees and design and construction professionals to provide valuable insights into the management of infection control issues. Infection control requirements are representationally indistinct but also omnipresent through all phases of the construction project life cycle: Failure to recognize their nature, relevance, and significance can result in delays, stoppages, and redesign work. Construction project resources (e.g., regulatory guidance and room data sheets) can mask or obscure the meaning of infection control issues. A preemptive identification of issues combined with knowledge sharing activities among project stakeholders can enable infection control requirements to be properly understood and addressed. Such initiatives should also reference existing infection control regulatory guidance and advice. © The Author(s) 2015.

  6. Modern Control Design for Flexible Wind Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A. D.

    2004-07-01

    Control can improve energy capture and reduce dynamic loads in wind turbines. In the 1970s and 1980s, wind turbines used classical control designs to regulate power and speed. The methods used, however, were not always successful. Modern turbines are larger, mounted on taller towers, and more dynamically active than their predecessors. Control systems to regulate turbine power and maintain stable, closed-loop behavior in the presence of turbulent wind inflow will be critical for these designs. This report applies modern state-space control design methods to a two-bladed teetering hub upwind machine at the National Wind Technology Center (NWTC), which is managed by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden, Colorado. The design objective is to regulate turbine speed and enhance damping in several low-damped flexible modes of the turbine. Starting with simple control algorithms based on linear models, complexity is added incrementally until the desired performance is firmly established.

  7. Instrumentation Standard Architectures for Future High Availability Control Systems

    International Nuclear Information System (INIS)

    Larsen, R.S.

    2005-01-01

    Architectures for next-generation modular instrumentation standards should aim to meet a requirement of High Availability, or robustness against system failure. This is particularly important for experiments both large and small mounted on production accelerators and light sources. New standards should be based on architectures that (1) are modular in both hardware and software for ease in repair and upgrade; (2) include inherent redundancy at internal module, module assembly and system levels; (3) include modern high speed serial inter-module communications with robust noise-immune protocols; and (4) include highly intelligent diagnostics and board-management subsystems that can predict impending failure and invoke evasive strategies. The simple design principles lead to fail-soft systems that can be applied to any type of electronics system, from modular instruments to large power supplies to pulsed power modulators to entire accelerator systems. The existing standards in use are briefly reviewed and compared against a new commercial standard which suggests a powerful model for future laboratory standard developments. The past successes of undertaking such projects through inter-laboratory engineering-physics collaborations will be briefly summarized

  8. Bechtel automated control of design document data

    International Nuclear Information System (INIS)

    Hollingshaus, H.

    1986-01-01

    Concern for nuclear power plant safety has resulted in many design features that complicate the licensing, operation, and maintenance of nuclear plants. To manage and control the design effectively, Bechtel has developed an integrated design document data base that provides efficient support of the plant during all phases of its life. The program runs on the IBM System 38, but can also be downloaded to an IBM PC to save storage and connect time. It is interactive and can accommodate multiple users at various locations. Although primarily developed to manage design changes resulting from the regulatory process and use of a fast track construction schedule, the data base will provide operations and maintenance personnel with qualifications status and pertinent data for each piece of equipment, including all electrical devices and a list of all associated design documents

  9. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    Energy Technology Data Exchange (ETDEWEB)

    C.J. Fernado

    1998-09-17

    The purpose of this document is to develop preliminary high-level functional and physical control system architectures for the proposed subsurface repository at Yucca Mountain. This document outlines overall control system concepts that encompass and integrate the many diverse systems being considered for use within the subsurface repository. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The subsurface repository design will be composed of a series of diverse systems that will be integrated to accomplish a set of overall functions and objectives. The subsurface repository contains several Instrumentation and Control (I&C) related systems including: waste emplacement systems, ventilation systems, communication systems, radiation monitoring systems, rail transportation systems, ground control monitoring systems, utility monitoring systems (electrical, lighting, water, compressed air, etc.), fire detection and protection systems, retrieval systems, and performance confirmation systems. Each of these systems involve some level of I&C and will typically be integrated over a data communication network. The subsurface I&C systems will also integrate with multiple surface-based site-wide systems such as emergency response, health physics, security and safeguards, communications, utilities and others. The scope and primary objectives of this analysis are to: (1) Identify preliminary system level functions and interface needs (Presented in the functional diagrams in Section 7.2). (2) Examine the overall system complexity and determine how and on what levels these control systems will be controlled and integrated (Presented in Section 7.2). (3) Develop a preliminary subsurface facility-wide design for an overall control system architecture, and depict this design by a series of control system functional block diagrams (Presented in Section 7.2). (4) Develop a series of physical architectures that

  10. SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN

    International Nuclear Information System (INIS)

    C.J. Fernado

    1998-01-01

    The purpose of this document is to develop preliminary high-level functional and physical control system architectures for the proposed subsurface repository at Yucca Mountain. This document outlines overall control system concepts that encompass and integrate the many diverse systems being considered for use within the subsurface repository. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The subsurface repository design will be composed of a series of diverse systems that will be integrated to accomplish a set of overall functions and objectives. The subsurface repository contains several Instrumentation and Control (I andC) related systems including: waste emplacement systems, ventilation systems, communication systems, radiation monitoring systems, rail transportation systems, ground control monitoring systems, utility monitoring systems (electrical, lighting, water, compressed air, etc.), fire detection and protection systems, retrieval systems, and performance confirmation systems. Each of these systems involve some level of I andC and will typically be integrated over a data communication network. The subsurface I andC systems will also integrate with multiple surface-based site-wide systems such as emergency response, health physics, security and safeguards, communications, utilities and others. The scope and primary objectives of this analysis are to: (1) Identify preliminary system level functions and interface needs (Presented in the functional diagrams in Section 7.2). (2) Examine the overall system complexity and determine how and on what levels these control systems will be controlled and integrated (Presented in Section 7.2). (3) Develop a preliminary subsurface facility-wide design for an overall control system architecture, and depict this design by a series of control system functional block diagrams (Presented in Section 7.2). (4) Develop a series of physical architectures

  11. Design of an adaptable nonlinear controller

    International Nuclear Information System (INIS)

    Benitez R, J.S.

    1994-01-01

    The study of the behavior of a nuclear reactor is of great importance as it allows to know a priori the conditions at which a reactor is submitted. In the sareactor are the design and simulation of control algorithms based on the theories of modern control with the objective of improving improving the performance criterions as well as to guarantee the the stability of the retrofitting system. (author)

  12. Impact of National Ambient Air Quality Standards Nonattainment Designations on Particulate Pollution and Health.

    Science.gov (United States)

    Zigler, Corwin M; Choirat, Christine; Dominici, Francesca

    2018-03-01

    Despite dramatic air quality improvement in the United States over the past decades, recent years have brought renewed scrutiny and uncertainty surrounding the effectiveness of specific regulatory programs for continuing to improve air quality and public health outcomes. We employ causal inference methods and a spatial hierarchical regression model to characterize the extent to which a designation of "nonattainment" with the 1997 National Ambient Air Quality Standard for ambient fine particulate matter (PM2.5) in 2005 causally affected ambient PM2.5 and health outcomes among over 10 million Medicare beneficiaries in the Eastern United States in 2009-2012. We found that, on average across all retained study locations, reductions in ambient PM2.5 and Medicare health outcomes could not be conclusively attributed to the nonattainment designations against the backdrop of other regional strategies that impacted the entire Eastern United States. A more targeted principal stratification analysis indicates substantial health impacts of the nonattainment designations among the subset of areas where the designations are estimated to have actually reduced ambient PM2.5 beyond levels achieved by regional measures, with noteworthy reductions in all-cause mortality, chronic obstructive pulmonary disorder, heart failure, ischemic heart disease, and respiratory tract infections. These findings provide targeted evidence of the effectiveness of local control measures after nonattainment designations for the 1997 PM2.5 air quality standard.

  13. Microgrid Plant Control Design and Development

    Energy Technology Data Exchange (ETDEWEB)

    Wiegman, Herman [GE Global Research, Niskayuna, New York (United States); Baone, Chaitanya [GE Global Research, Niskayuna, New York (United States)

    2017-08-14

    This report discusses the technical performance of the proposed microgrid at Potsdam, New York, and the enhanced microgrid controller platform. The test objectives were outlined by the DOE, and summary results and discussion are given for each objective. The findings show that the proposed Potsdam, NY microgrid would have a significant impact on the regional CO2 emissions, the amount of imported energy from the utility, and the resiliency of the critical loads. Additionally, the enhanced microgrid control system developed for this project was tested to be compliant with IEEE 1547 standards, and able to generate revenues to help offset energy costs by way of participation in ancillary services.

  14. American National Standard: design requirements for light-water-reactor fuel-handling systems

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This standard defines the required functions of fuel handling systems at light water reactor nuclear power plants. It provides minimum design requirements for equipment and tools for safe handling of nuclear fuel and control components at light water reactor nuclear power plants. The fuel handling system covered by this standard consists of handling equipment used for receiving and inspecting fuel containing new and recycled uranium; transporting on-site and loading fuel containing new and recycled uranium or irradiated fuel and control components in the reactor; removing from the reactor, transporting to storage, and inspecting irradiated fuel and loading casks for shipment of irradiated fuel from the site. It includes basic requirements and configuration for design, fabrication, maintenance, and operation. The basis of this standard is that the intended function of the equipment will be performed in an efficient and economical manner that assures protection to plant personnel and to the public, and that any radiation exposurers are maintained as low as reasonably achievable

  15. An adaptive software defined radio design based on a standard space telecommunication radio system API

    Science.gov (United States)

    Xiong, Wenhao; Tian, Xin; Chen, Genshe; Pham, Khanh; Blasch, Erik

    2017-05-01

    Software defined radio (SDR) has become a popular tool for the implementation and testing for communications performance. The advantage of the SDR approach includes: a re-configurable design, adaptive response to changing conditions, efficient development, and highly versatile implementation. In order to understand the benefits of SDR, the space telecommunication radio system (STRS) was proposed by NASA Glenn research center (GRC) along with the standard application program interface (API) structure. Each component of the system uses a well-defined API to communicate with other components. The benefit of standard API is to relax the platform limitation of each component for addition options. For example, the waveform generating process can support a field programmable gate array (FPGA), personal computer (PC), or an embedded system. As long as the API defines the requirements, the generated waveform selection will work with the complete system. In this paper, we demonstrate the design and development of adaptive SDR following the STRS and standard API protocol. We introduce step by step the SDR testbed system including the controlling graphic user interface (GUI), database, GNU radio hardware control, and universal software radio peripheral (USRP) tranceiving front end. In addition, a performance evaluation in shown on the effectiveness of the SDR approach for space telecommunication.

  16. Control room design and human factors using a virtual reality based tool for design, test and training

    International Nuclear Information System (INIS)

    Lirvall, Peter

    1998-02-01

    This report describes a user-centred approach to control room design adopted by IFE for the nuclear industry. The novelty of this approach is the development of a Control Room Philosophy, and the use of Virtual Reality (VR) technology as a tool in the design process, integrated with a specially developed Design Documentation System (DDS) and a process display prototyping tool PICASSO-3. The control room philosophy identifies all functional aspects of a control centre, to define the baseline principles and guidelines for the design. The use of VR technology enables end-users of the control room design (e.g. control room operators) to specify their preferred design of the new control room, and to replace the need for a physical mock-up to test and evaluate the proposed design. The DDS, integrated with the VR design tool, guides the control room operators, through a structured approach, to document the proposed design in a complete design specification. The VR tool, specially developed by IFE, is called the VR based Design, Test and Training tool (VR DTandT). It is not only intended to visualise the design, but also to test and evaluate the design. When the design is implemented, the same model is re-used as a VR based training simulator for operators. A special feature in the VR DTandT tool is that the verification and validation (VandV) tests, concerning human factors, are according to the regulative standards for nuclear control rooms

  17. 10 CFR 72.146 - Design control.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Design control. 72.146 Section 72.146 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR THE INDEPENDENT STORAGE OF SPENT NUCLEAR FUEL..., radiation, shielding, stress, thermal, hydraulic, and accident analyses; compatibility of materials...

  18. Design of Threshold Controller Based Chaotic Circuits

    DEFF Research Database (Denmark)

    Mohamed, I. Raja; Murali, K.; Sinha, Sudeshna

    2010-01-01

    We propose a very simple implementation of a second-order nonautonomous chaotic oscillator, using a threshold controller as the only source of nonlinearity. We demonstrate the efficacy and simplicity of our design through numerical and experimental results. Further, we show that this approach...

  19. Design of POLCA material control systems

    NARCIS (Netherlands)

    Riezebos, J.

    2010-01-01

    POLCA is a material control system designed for make-to-order or engineer-to-order companies. These firms have to cope with a high variety of customised products, and strong pressure to provide short throughput times. POLCA constrains the amount of work in progress on the shop floor in order to

  20. Agile Design of Sewer System Control

    NARCIS (Netherlands)

    Van Nooijen, R.P.; Kolechkina, A.G.; Van Leeuwen, P.E.R.M.; Van Velzen, E.

    2011-01-01

    We describe the first part of an attempt to include stakeholder participation in the design of a central automatic controller for a sewer system in a small pilot project (five subcatchments) and present lessons learned so far. The pilot is part of a project aimed at the improvement of water quality

  1. Space Launch System Ascent Flight Control Design

    Science.gov (United States)

    Orr, Jeb S.; Wall, John H.; VanZwieten, Tannen S.; Hall, Charles E.

    2014-01-01

    A robust and flexible autopilot architecture for NASA's Space Launch System (SLS) family of launch vehicles is presented. The SLS configurations represent a potentially significant increase in complexity and performance capability when compared with other manned launch vehicles. It was recognized early in the program that a new, generalized autopilot design should be formulated to fulfill the needs of this new space launch architecture. The present design concept is intended to leverage existing NASA and industry launch vehicle design experience and maintain the extensibility and modularity necessary to accommodate multiple vehicle configurations while relying on proven and flight-tested control design principles for large boost vehicles. The SLS flight control architecture combines a digital three-axis autopilot with traditional bending filters to support robust active or passive stabilization of the vehicle's bending and sloshing dynamics using optimally blended measurements from multiple rate gyros on the vehicle structure. The algorithm also relies on a pseudo-optimal control allocation scheme to maximize the performance capability of multiple vectored engines while accommodating throttling and engine failure contingencies in real time with negligible impact to stability characteristics. The architecture supports active in-flight disturbance compensation through the use of nonlinear observers driven by acceleration measurements. Envelope expansion and robustness enhancement is obtained through the use of a multiplicative forward gain modulation law based upon a simple model reference adaptive control scheme.

  2. Analysis, Control and Design of Walking Robots

    NARCIS (Netherlands)

    van Oort, Gijs

    2011-01-01

    In this thesis five research questions are discussed that are related to the development of two-legged (bipedal) walking robots. The research questions are categorized in three main topics: analysis, control and actuation and design. The research questions are: - How can we analyze the behavior of a

  3. Consys Linear Control System Design Software Package

    International Nuclear Information System (INIS)

    Diamantidis, Z.

    1987-01-01

    This package is created in order to help engineers, researchers, students and all who work on linear control systems. The software includes all time and frequency domain analysises, spectral analysises and networks, active filters and regulators design aids. The programmes are written on Hewlett Packard computer in Basic 4.0

  4. Intelligent Controller Design for a Chemical Process

    OpenAIRE

    Mr. Glan Devadhas G; Dr.Pushpakumar S.

    2010-01-01

    Chemical process control is a challenging problem due to the strong on*line non*linearity and extreme sensitivity to disturbances of the process. Ziegler – Nichols tuned PI and PID controllers are found to provide poor performances for higher*order and non–linear systems. This paper presents an application of one*step*ahead fuzzy as well as ANFIS (adaptive*network*based fuzzy inference system) tuning scheme for an Continuous Stirred Tank Reactor CSTR process. The controller is designed based ...

  5. Design of control system for profile gauge

    International Nuclear Information System (INIS)

    Huang Yibin; Zhang Yu'ai

    2013-01-01

    The profile gauge can on-line get the cross section in the steel strip, so it has been widely used in hot continuous rolling production-line. The structure of profile gauge and its distributed hardware structure based on PLC and software design of its control subsystem were introduced. The method of temperature and humidity measurement was analyzed. The time response of X-ray machine control based on RS232 communication was researched. It is proved that the control system meets the requirements of the profile gauge system. (authors)

  6. 40 CFR 264.1101 - Design and operating standards.

    Science.gov (United States)

    2010-07-01

    ... to prevent the migration of hazardous constituents into the barrier (e.g., a geomembrane covered by a... containment system including a secondary barrier designed and constructed to prevent migration of hazardous...-site a certification by a qualified Professional Engineer that the containment building design meets...

  7. STANDARDS IN CONTROL AND PROTECTION TEHNOLOGY FOR ELECTRIC POWER SYSTEMS

    OpenAIRE

    Daniel COSTIANU; Nicoleta ARGHIRA; Ioana FĂGĂRĂŞAN; Sergiu St. ILIESCU

    2008-01-01

    The features of the standard IEC 16850 with respect to intelligent applications in substations are summarized. It is shown how modeling of functions independently from its allocation to devices allows optimizing existing applications and opening up for future intelligent applications. The data model provides all information in a substation needed not only for control and protection functions but also about the IEDs and the switchgear configuration.

  8. Windmills by Design: Purposeful Curriculum Design to Meet Next Generation Science Standards in a 9-12 Physics Classroom

    Science.gov (United States)

    Concannon, James; Brown, Patrick L.

    2017-01-01

    The "Next Generation Science Standards" (NGSS) challenges science teachers to think beyond specific content standards when considering how to design and implement curriculum. This lesson, "Windmills by Design," is an insightful lesson in how science teachers can create and implement a cross-cutting lesson to teach the concepts…

  9. 7 CFR 1792.103 - Seismic design and construction standards for new buildings.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Seismic design and construction standards for new..., REGULATIONS, AND EXECUTIVE ORDERS Seismic Safety of Federally Assisted New Building Construction § 1792.103 Seismic design and construction standards for new buildings. (a) In the design and construction of...

  10. 40 CFR 267.1101 - What design and operating standards must my containment building meet?

    Science.gov (United States)

    2010-07-01

    ... dust emissions under § 267.1102(d). (2) The unit is designed and operated in a fashion that assures... 40 Protection of Environment 26 2010-07-01 2010-07-01 false What design and operating standards... FACILITIES OPERATING UNDER A STANDARDIZED PERMIT Containment buildings § 267.1101 What design and operating...

  11. Sun Safe Mode Controller Design for LADEE

    Science.gov (United States)

    Fusco, Jesse C.; Swei, Sean S. M.; Nakamura, Robert H.

    2015-01-01

    This paper presents the development of sun safe controllers which are designed to keep the spacecraft power positive and thermally balanced in the event an anomaly is detected. Employed by NASA's Lunar Atmosphere and Dust Environment Explorer (LADEE), the controllers utilize the measured sun vector and the spacecraft body rates for feedback control. To improve the accuracy of sun vector estimation, the least square minimization approach is applied to process the sensor data, which is proven to be effective and accurate. To validate the controllers, the LADEE spacecraft model engaging the sun safe mode was first simulated and then compared with the actual LADEE orbital fight data. The results demonstrated the applicability of the proposed sun safe controllers.

  12. Fuzzy Logic Controller Design for Intelligent Robots

    Directory of Open Access Journals (Sweden)

    Ching-Han Chen

    2017-01-01

    Full Text Available This paper presents a fuzzy logic controller by which a robot can imitate biological behaviors such as avoiding obstacles or following walls. The proposed structure is implemented by integrating multiple ultrasonic sensors into a robot to collect data from a real-world environment. The decisions that govern the robot’s behavior and autopilot navigation are driven by a field programmable gate array- (FPGA- based fuzzy logic controller. The validity of the proposed controller was demonstrated by simulating three real-world scenarios to test the bionic behavior of a custom-built robot. The results revealed satisfactorily intelligent performance of the proposed fuzzy logic controller. The controller enabled the robot to demonstrate intelligent behaviors in complex environments. Furthermore, the robot’s bionic functions satisfied its design objectives.

  13. Design principles of a cooperative robot controller

    Science.gov (United States)

    Hayward, Vincent; Hayati, Samad

    1987-01-01

    The paper describes the design of a controller for cooperative robots being designed at McGill University in a collaborative effort with the Jet Propulsion Laboratory. The first part of the paper discusses the background and motivation for multiple arm control. Then, a set of programming primitives, which are based on the RCCL system and which permit a programmer to specify cooperative tasks are described. The first group of primitives are motion primitives which specify asynchronous motions, master/slave motions, and cooperative motions. In the context of cooperative robots, trajectory generation issues will be discussed and the implementation described. A second set of primitives provides for the specification of spatial relationships. The relations between programming and control in the case of multiple robot are examined. Finally, the paper describes the allocation of various tasks among a set of microprocessors sharing a common bus.

  14. CV controls from design to operation

    CERN Document Server

    Blanc, D

    2002-01-01

    The cooling and Ventilation (CV) group has emphasised the need to redefine its organisational structure at the end of 98. The main objective of this operation was to ensure the CV group to be more competitive and efficient through the growing tasks of the LHC projects. The main evolution given to this reorganisation is that the new structure is more project oriented and then operates on three distinct axes: Design, Work and Operation. Process control project management requires a complete and early interaction and participation of all the actors involved. This procedure to be efficient and constructive must be considered and performed not only during the design stage but along the project planning phases and must go beyond the completion work including the process control operation activity. The paper explains the present project management for process control. It describes the present constraints and gives suggestions to a different approach to these projects to improve performances and efficiency of a contr...

  15. Military Housing: Status of the Services' Implementation of the Current Barracks Design Standard

    National Research Council Canada - National Science Library

    1999-01-01

    .... In November 1995, DOD adopted a new barracks construction standard, referred to as the 1+1 design standard, that called for more space and increased privacy in new barracks for service members permanently assigned to an installation...

  16. Performance Analysis of Video PHY Controller Using Unidirection and Bi-directional IO Standard via 7 Series FPGA

    DEFF Research Database (Denmark)

    Das, Bhagwan; Abdullah, M F L; Hussain, Dil muhammed Akbar

    2017-01-01

    The Video PHY controller offers an interface between transmitters/receivers and video ports. These video ports are categorized in HDMI or Displayport. HDMI Video PHY controller are mostly used for their high speed operation for high resolution graphics. However, the execution of high resolution...... graphics consumes more power, this creates a need of designing the low power design for Video PHY controller. In this paper, the performance of Video PHY controller is analyzed by comparing the power consumption of unidirectional and bi-directional IO Standard over 7 series FPGA. It is determined...... that total on-chip power is reduced for unidirectional IO Standard based Video PHY controller compared to bidirectional IO Standard based Video PHY controller. The most significant achievement of this work is that it is concluded that unidirectional IO Standard based Video PHY controller consume least...

  17. 49 CFR 192.476 - Internal corrosion control: Design and construction of transmission line.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Internal corrosion control: Design and... STANDARDS Requirements for Corrosion Control § 192.476 Internal corrosion control: Design and construction... the risk of internal corrosion. At a minimum, unless it is impracticable or unnecessary to do so, each...

  18. Comparative analysis of nuclear reactor control system designs

    International Nuclear Information System (INIS)

    Russcher, G.E.

    1975-01-01

    Control systems are vital to the safe operation of nuclear reactors. Their seismic design requirements are some of the most important criteria governing reactor system design evaluation. Consequently, the seismic analysis for nuclear reactors is directed to include not only the mechanical and structural seismic capabilities of a reactor, but the control system functional requirements as well. In the study described an alternate conceptual design of a safety rod system was compared with a prototypic system design to assess their relative functional reliabilities under design seismic conditions. The comparative methods utilized standard success tree and decision tree techniques to determine the relative figures of merit. The study showed: (1) The methodology utilized can provide both qualitative and quantitative bases for design decisions regarding seismic functional capabilities of two systems under comparison, (2) the process emphasizes the visibility of particular design features that are subject to common mode failure while under seismic loading, and (3) minimal improvement was shown to be available in overall system seismic performance of an independent conceptual design, however, it also showed the system would be subject to a new set of operational uncertainties which would have to be resolved by extensive development programs

  19. Design and testing of multi-standard waveguide couplers.

    Science.gov (United States)

    Beeson, S; Neuber, A

    2012-03-01

    Most applications that use waveguides are designed for a single frequency or single band of frequency, and thus the waveguide dimensions are chosen for single mode operation. In special cases where multiple frequencies across multiple bands are needed (i.e., probing the temporal response of decaying plasma using a cw source that is generated by a pulsed source), special techniques must be used in order to implement both sources into a single waveguide structure. This paper presents two types of couplers designed to implement x-band frequencies into an s-band system with a large coupling coefficient ( -10 dB) at the design frequency of 11 GHz. Along with a discussion on the design procedure, a detailed description on the parameter optimization and initial values estimation is presented. The custom waveguide structures were tested utilizing an Agilent E8364B PNA network analyzer, and showed reasonable agreement with the simulated performance over the frequency range of interest.

  20. History of Road Design Standards in LADOTD : Research Project Capsule

    Science.gov (United States)

    2012-10-01

    According to the Louisiana Statewide Transportation Plan, Louisianas highway : network is comprised of over 60,000 miles, of which over 16,000 miles are : maintained by the state. The roadways were designed and constructed : according to the desig...

  1. 40 CFR 265.1201 - Design and operating standards.

    Science.gov (United States)

    2010-07-01

    ... as designed and that releases that may adversely impact human health or the environment are not... products, or contaminated run-off, to the soil, ground water, surface water, and atmosphere; (2) Provide a...

  2. SOA and Web services interface design principles, techniques, and standards

    CERN Document Server

    Bean, James

    2009-01-01

    SOA offers solutions to the most intractable business problems faced by every enterprise, but getting the SOA service interface right requires the practical design knowledge this book uniquely delivers

  3. Improvement and standardization of communication means for control room personnel

    International Nuclear Information System (INIS)

    Preuss, W.; Eggerdinger, C.; Sieber, R.

    1983-01-01

    The subjects under investigation were the ''Shift book'', ''Simulation book'', and ''Technical and organisational changes and their records''. It was intended to analyse both the communication processes and the associated written documentation in order to determine areas for potential improvement and possibilities for standardization. Information was obtained by interviewing shift members and their supervisors, by general observation, and by compilation and evaluation of the extensive dokumentation. Assessment criteria were developed on a scientific basis and in the course of the investigation, in particular from ergonomic findings, as well as from standards and regulations and comparison between the plants. General practical suggestions were developed for the improvement of the communication forms and the formal design of the documents and their contents. The transfer of the recommendations to practical use in the plants presupposes the consideration of plant-specific frames of reference. The report includes a compilation and listing of suggestions for improvement in topical subdivisions. (orig.) [de

  4. Design of Air Traffic Control Operation System

    Directory of Open Access Journals (Sweden)

    Gabriela STROE

    2017-09-01

    Full Text Available This paper presents a numerical simulation for a different aircraft, based on the specific aircraft data that can be incorporated in the model and the equations of motions which can be consequently solved. The aircraft flight design involves various technical steps and requires the use of sophisticated software having modeling and simulation capabilities. Within the flight simulation model, the aerodynamic model can be regarded as the most complex and most important. With appropriate aerodynamic modeling the aerodynamic forces and moments acting on the aircraft's center of gravity can be numerically solved with accuracy. These forces and moments are further used to solve the equations of motion. The development of control and computing technology makes it possible for advanced flight control strategy. The advanced control techniques tend to make the control design and their implementation much more complicated with more control loops or channels; in this line, the autopilot of modern aircrafts includes a variety of automatic control systems that aid and support the flight navigation, flight management, and perform the enhancing and/or augmenting of the stability characteristics of the airplane. Therefore in this context it is very important to choose the dynamic that will satisfy the performance and robustness specifications.

  5. Design of Dependable Control System Using a Component Based Approach

    DEFF Research Database (Denmark)

    Blanke, M.

    1995-01-01

    Design of fault handling in control systems is discussed and a consistent method for design is presented.......Design of fault handling in control systems is discussed and a consistent method for design is presented....

  6. Design of controller for control rod of research reactors

    International Nuclear Information System (INIS)

    Abou-Zaid, R.M.F.M

    2008-01-01

    Designing and testing digital control system for any nuclear research reactor can be costly and time consuming. In this thesis, a rapid, low-cost proto typing and testing procedure for digital controller design is proposed using the concept of Hardware-In-The-Loop (HIL). Some of the control loop components are real hardware components and the others are simulated. First, the whole system is modeled and tested by Real-Time Simulation (RTS) using conventional simulation techniques such as MATLAB / SIMULINK. Second the Hardware-in-the-loop simulation is tested using Real-Time Windows Target in MATLAB and Visual C ++ . The control parts are included as hardware components which are the reactor control rod and its drivers. Three kinds of controllers are studied, Proportional-Derivative (PD), Proportional-Integral-Derivative (PID) and Fuzzy controller. An experimental setup for the hardware used in HIL concept for the control of the nuclear research reactor has been realized. Experimental results are obtained and compared with the simulation results. The experimental results indicate the validation of HIL method in this domain.

  7. SysGRID: IEC 61850 and IEC 61499 Standard Based Engineering Tool for Smart Grid Automation Design

    Directory of Open Access Journals (Sweden)

    Chen-Wei Yang

    2014-12-01

    Full Text Available The so called Smart Grid is said to be distributed in nature with an accompanying control architecture which is made up of a heterogeneous network of controllers communicating in a peer-to-peer manner. The paper proposes a novel computer-aided model-based system engineering process for the design of a Smart Grid applications from the initial design specification through to the validation of the control system and hardware deployment. The process is supported by the SysGRID tool, which plays the roles of a system configurator and device configurator adopted from the International Standard IEC 61850. SysGRID supports system-level design of automation logic in the form of function block networks compliant with the international standard IEC 61499. The capabilities of SysGRID are demonstrated through the process of designing a distributed protection application based on IEC 61850 and the resultant validation process in a close-loop co-simulation.

  8. Contribution of the VISTA ITL program for the standard design approval of the SMART design

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun Sik; Chung, Young Jong; Joo, Hyung Kook; Lee, Won Jae; Kim, Hark Rho; Song, Chul Hwa; Yi, Sung Jae [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    A small scale integral effect test (IET) program had been performed by the Korea Atomic Energy Research Institute (KAERI) using the VISTA integral test loop (VISTA ITL). It has the simulation capability of small break loss of coolant accident (SBLOCA), complete loss of reactor coolant system (RCS) flow (CLOF) and passive residual heat removal system (PRHRS) performance for the SMART design. The reference plant of the VISTA ITL is a 330 MWth integral pressurized water reactor (iPWR), SMART, which was developed by KAERI. Its standard design had been approved by Korean regulatory authority on July 2012. The SMART reactor is characterized by the introduction of simplified and improved safety systems such as passive residual heat removal system (PRHRS) and its integral arrangement of the reactor vessel assembly. Integral reactor design eliminates the large size pipe connections between major components. Thus, it excludes the occurrence of a large break loss of coolant accident (LBLOCA), and a SBLOCA is one of major concerns for safety analysis. Therefore, the VISTA ITL was used to investigate various thermal hydraulic phenomena during the SBLOCA. The break flow rate, safety injection flow rate, and thermal hydraulic behaviors of major components were measured for a typical break size and break locations. The acquired data was used to validate related thermal hydraulic models of the safety analysis code, TASS/SMR S which is used to validate the safety of the SMART in coping with the SBLOCA scenarios. A set of tests for SBLOCAs, CLOF and PRHRS performance was performed to understand the general behavior and to assess its safety of the SMART design using the VISTA ITL facility. The test results were used to validate the TASS/SMR S code. This paper also introduces regulatory issues concerning the VISTA ITL tests and how they were resolved. The scoping analysis was performed in resolving regulatory issues using a best estimate system analysis code, MARS KS developed by KAERI.

  9. Computerized design of controllers using data models

    Science.gov (United States)

    Irwin, Dennis; Mitchell, Jerrel; Medina, Enrique; Allwine, Dan; Frazier, Garth; Duncan, Mark

    1995-01-01

    The major contributions of the grant effort have been the enhancement of the Compensator Improvement Program (CIP), which resulted in the Ohio University CIP (OUCIP) package, and the development of the Model and Data-Oriented Computer Aided Design System (MADCADS). Incorporation of direct z-domain designs into CIP was tested and determined to be numerically ill-conditioned for the type of lightly damped problems for which the development was intended. Therefore, it was decided to pursue the development of z-plane designs in the w-plane, and to make this conversion transparent to the user. The analytical development needed for this feature, as well as that needed for including compensator damping ratios and DC gain specifications, closed loop stability requirements, and closed loop disturbance rejection specifications into OUCIP are all contained in Section 3. OUCIP was successfully tested with several example systems to verify proper operation of existing and new features. The extension of the CIP philosophy and algorithmic approach to handle modern multivariable controller design criteria was implemented and tested. Several new algorithms for implementing the search approach to modern multivariable control system design were developed and tested. This analytical development, most of which was incorporated into the MADCADS software package, is described in Section 4, which also includes results of the application of MADCADS to the MSFC ACES facility and the Hubble Space Telescope.

  10. Design and Characterization of Vertical Mesh Capacitors in Standard CMOS

    DEFF Research Database (Denmark)

    Christensen, Kåre Tais

    2001-01-01

    This paper shows how good RF capacitors can be made in a standard digital CMOS process. The capacitors which are also well suited for binary weighted switched capacitor banks show very good RF performance: Q-values of 57 at 4.0 GHz, a density of 0.27 fF/μ2, 2.2 μm wide shielded unit capacitors, 6...

  11. Strategy for standardization of preeclampsia research study design.

    Science.gov (United States)

    Myatt, Leslie; Redman, Christopher W; Staff, Anne Cathrine; Hansson, Stefan; Wilson, Melissa L; Laivuori, Hannele; Poston, Lucilla; Roberts, James M

    2014-06-01

    Preeclampsia remains a major problem worldwide for mothers and babies. Despite intensive study, we have not been able to improve the management or early recognition of preeclampsia. At least part of this is because of failure to standardize the approach to studying this complex syndrome. It is possible that within the syndrome there may be different phenotypes with pathogenic pathways that differ between the subtypes. The capacity to recognize and to exploit different subtypes is of obvious importance for prediction, prevention, and treatment. We present a strategy for research to study preeclampsia, which will allow discrimination of such possible subtypes and also allow comparison and perhaps combinations of findings in different studies by standardized data and biosample collection. To make studies relevant to current clinical practice, the definition of preeclampsia can be that currently used and accepted. However, more importantly, sufficient data should be collected to allow other diagnostic criteria to be used and applied retrospectively. To that end, we present what we consider to be the minimum requirements for a data set in a study of preeclampsia that will facilitate comparisons. We also present a comprehensive or optimal data set for in-depth investigation of pathophysiology. As we approach the definition of phenotypes of preeclampsia by clinical and biochemical criteria, adherence to standardized protocols will hasten our understanding of the causes of preeclampsia and development of targeted treatment strategies.

  12. Technical Standards for Command and Control Information Systems (CCISs)

    Science.gov (United States)

    1992-01-01

    network. There is a perceived requirement for an ultimate delivery capability, whereby important communications are sustained , even at very low data...Transfer Layer in RTTS developed in France for use in LANs (see Section 15.4.4) [Ref. GAM 1987]. XTP is designed to support 100 Mbps sustained transfer...10746-2U_____ Fmeo for OOP standards WD 10748-3 ___ User %*IQ W 10746-4 Architectura semantics. formalismns W 04- Key: E3 v 015I EM o/CD U ISO G-4

  13. Hierarchical Control of Droop-Controlled DC and AC Microgrids - A General Approach Towards Standardization

    DEFF Research Database (Denmark)

    Guerrero, Josep M.; Vásquez, Juan V.; Teodorescu, Remus

    2009-01-01

    from ISA-95 and electrical dispatching standards to endow smartness and flexibility to microgrids. The hierarchical control proposed consist of three levels: i) the primary control is based on the droop method, including an output impedance virtual loop; ii) the secondary control allows restoring...

  14. Synthetic salt cake standards for analytical laboratory quality control

    International Nuclear Information System (INIS)

    Schilling, A.E.; Miller, A.G.

    1980-01-01

    The validation of analytical results in the characterization of Hanford Nuclear Defense Waste requires the preparation of synthetic waste for standard reference materials. Two independent synthetic salt cake standards have been prepared to monitor laboratory quality control for the chemical characterization of high-level salt cake and sludge waste in support of Rockwell Hanford Operations' High-Level Waste Management Program. Each synthetic salt cake standard contains 15 characterized chemical species and was subjected to an extensive verification/characterization program in two phases. Phase I consisted of an initial verification of each analyte in salt cake form in order to determine the current analytical capability for chemical analysis. Phase II consisted of a final characterization of those chemical species in solution form where conflicting verification data were observed. The 95 percent confidence interval on the mean for the following analytes within each standard is provided: sodium, nitrate, nitrite, phosphate, carbonate, sulfate, hydroxide, chromate, chloride, fluoride, aluminum, plutonium-239/240, strontium-90, cesium-137, and water

  15. Windows Calorimeter Control (WinCal) program computer software design description

    International Nuclear Information System (INIS)

    Pertzborn, N.F.

    1997-01-01

    The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

  16. Control design of a nonlinear controller to stabilize the nonlinear ...

    African Journals Online (AJOL)

    This article presents the design of a highly efficient nonlinear0 controller which is a kind of an Active Queue Management (AQM) scheme to stabilize the nonlinear TCP model dynamics. Specific boundary conditions have been considered for stability occurrences and have been compared with other existing Active Queue ...

  17. Design and Realization of Intelligent Flow Controller

    Directory of Open Access Journals (Sweden)

    Jianxiong Ye

    2014-09-01

    Full Text Available According to accurate flow rate control requirements in large irrigation zone, a fuzzy controller with dead-band is designed on the characteristics analysis and comparison of PID and Fuzzy. The setting values of water flow for gates are determined by real-time water level detection sensors, and the realistic value of discharged water and gate opening are detected out with relative sensors, simulation manifest that the specific control strategy can adjust the gate swiftly in circumstance of huge offset, and regulate the gate slightly in time of small bias, it is realized with Siemens S315 PLC (Programmable Logical Controller and has being working steadily for 2 years, the aim of regulation is performed properly.

  18. Designer's handbook of instrumentation and control circuits

    CERN Document Server

    Carr, Joseph J

    1991-01-01

    Here is a comprehensive, practical guide to the entire process of analog instrumentation and control, from sensor input to data conversion circuitry and final output. This readable handbook avoids complex mathematical treatments, instead taking an applications-oriented approach and presenting many sample circuits and concrete examples. It is an essential reference for engineers and high-level technicians in a variety of scientific and engineering fields--anywhere data is collected electronically and where such data is used to control physical processes.Key Features* Covers design o

  19. Future control room design (modernization of control room systems)

    International Nuclear Information System (INIS)

    Reischl, Ludwig; Freitag, Timo; Dergel, Rene

    2009-01-01

    In the frame of lifetime extension for nuclear power plants the modernization of the complete safety and operational control technology will be digitalized. It is also recommended to modernize the operator facilities, monitoring systems in the control room, the back-up shut-down center and the local control stations. The authors summarize the reasons for the modernization recommendations and discuss possible solutions for display-oriented control rooms. A concept for control room backfitting includes generic requirements, requirements of the local authorities, ergonomic principles information content and information density, and the design process. The backfitting strategy should include a cooperation with the operational personnel, The quality assurance and training via simulator needs sufficient timing during the implementation of the backfitting.

  20. Simulant Basis for the Standard High Solids Vessel Design

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-01

    This document provides the requirements for a test simulant suitable for demonstrating the mixing requirements for the Single High Solids Vessel Design (SHSVD). This simulant has not been evaluated for other purposes such as gas retention and release or erosion. The objective of this work is to provide an underpinning for the simulant properties based on actual waste characterization.

  1. Designation Of The Standard Stratotype And Age Of Nsukka ...

    African Journals Online (AJOL)

    The type locality of Nsukka Formation was designated north of Nsukka in an area along Nadu River, without any formal description of the type section. Field mapping of the type locality was undertaken with the intention to formally define the type section. The thickest and best exposed is a 40 meter thick, stream section at ...

  2. Design and control of swarm dynamics

    CERN Document Server

    Bouffanais, Roland

    2016-01-01

    The book is about the key elements required for designing, building and controlling effective artificial swarms comprised of multiple moving physical agents. Therefore this book presents the fundamentals of each of those key elements in the particular frame of dynamic swarming, specifically exposing the profound connections between these elements and establish some general design principles for swarming behaviors. This scientific endeavor requires an inter-disciplinary approach: biomimetic inspiration from ethology and ecology, study of social information flow, analysis of temporal and adaptive signaling network of interaction, considerations of control of networked real-time systems, and lastly, elements of complex adaptive dynamical systems. This book offers a completely new perspective on the scientific understanding of dynamic collective behaviors thanks to its multi-disciplinary approach and its focus on artificial swarm of physical agents. Two of the key problems in understanding the emergence of swarm ...

  3. Hospital design for better infection control

    Directory of Open Access Journals (Sweden)

    Lateef Fatimah

    2009-01-01

    Full Text Available The physical design and infrastructure of a hospital or institution is an essential component of its infection control measure. Thus is must be a prerequisite to take these into consideration from the initial conception and planning stages of the building. The balance between designing a hospital to be an open, accessible and public place and the control to reduce the spread of infections diseases is a necessity. At Singapore General Hospital, many lessons were learnt during the SARS outbreak pertaining to this. During and subsequent to the SARS outbreak, many changes evolved in the hospital to enable us to handle and face any emerging infectious situation with calm, confidence and the knowledge that staff and patients will be in good stead. This paper will share some of our experiences as well as challenges

  4. Russian standards and design practice of ensuring NPP reliability under severe external loading conditions

    International Nuclear Information System (INIS)

    Birbraer, A.N.

    1993-01-01

    Russian Standards and design practice of ensuring NPP reliability under severe external loading conditions are described. The main attention is paid to the seismic design requirements. Explosions, aircraft impact, and tornado are briefly examined too (author)

  5. Design and Characterization of Vertical Mesh Capacitors in Standard CMOS

    OpenAIRE

    Christensen, Kåre Tais

    2001-01-01

    This paper shows how good RF capacitors can be made in a standard digital CMOS process. The capacitors which are also well suited for binary weighted switched capacitor banks show very good RF performance: Q-values of 57 at 4.0 GHz, a density of 0.27 fF/μ2, 2.2 μm wide shielded unit capacitors, 6% bottom plate capacitance, better than 3-5% process variation and negligible series inductance. Further, a simple yet accurate method is presented that allows hand calculation of the capacitance valu...

  6. Control system design for UAV trajectory tracking

    Science.gov (United States)

    Wang, Haitao; Gao, Jinyuan

    2006-11-01

    In recent years, because of the emerging requirements for increasing autonomy, the controller of uninhabited air vehicles must be augmented with a very sophisticated autopilot design which is capable of tracking complex and agile maneuvering trajectory. This paper provides a simplified control system framework to solve UAV maneuvering trajectory tracking problem. The flight control system is divided into three subsystems including command generation, transformation and allocation. According to the kinematics equations of the aircraft, flight path angle commands can be generated by desired 3D position from path planning. These commands are transformed to body angular rates through direct nonlinear mapping, which is simpler than common multi-loop method based on time scale separation assumption. Then, by using weighted pseudo-inverse method, the control surface deflections are allocated to follow body angular rates from the previous step. In order to improve the robustness, a nonlinear disturbance observer-based approach is used to compensate the uncertainty of system. A 6DOF nonlinear UAV model is controlled to demonstrate the performance of the trajectory tracking control system. Simulation results show that the control strategy is easy to be realized and the precision of tracking is satisfying.

  7. Advanced Control Considerations for Turbofan Engine Design

    Science.gov (United States)

    Connolly, Joseph W.; Csank, Jeffrey T.; Chicatelli, Amy

    2016-01-01

    This paper covers the application of a model-based engine control (MBEC) methodology featuring a self tuning on-board model for an aircraft turbofan engine simulation. The nonlinear engine model is capable of modeling realistic engine performance, allowing for a verification of the advanced control methodology over a wide range of operating points and life cycle conditions. The on-board model is a piece-wise linear model derived from the nonlinear engine model and updated using an optimal tuner Kalman Filter estimation routine, which enables the on-board model to self-tune to account for engine performance variations. MBEC is used here to show how advanced control architectures can improve efficiency during the design phase of a turbofan engine by reducing conservative operability margins. The operability margins that can be reduced, such as stall margin, can expand the engine design space and offer potential for efficiency improvements. Application of MBEC architecture to a nonlinear engine simulation is shown to reduce the thrust specific fuel consumption by approximately 1% over the baseline design, while maintaining safe operation of the engine across the flight envelope.

  8. 78 FR 724 - California State Nonroad Engine Pollution Control Standards; Off-Highway Recreational Vehicles...

    Science.gov (United States)

    2013-01-04

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9766-2] California State Nonroad Engine Pollution Control Standards; Off- Highway Recreational Vehicles and Engines; Request for Authorization; Opportunity for Public...\\ California State Nonroad Engine and Vehicle Pollution Control Standards; Authorization of State Standards...

  9. 46 CFR 128.240 - Hydraulic or pneumatic power and control-materials and pressure design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Hydraulic or pneumatic power and control-materials and... Hydraulic or pneumatic power and control—materials and pressure design. (a) Each standard piping component (such as pipe runs, fittings, flanges, and standard valves) for hydraulic or pneumatic power and control...

  10. 25 CFR 542.10 - What are the minimum internal control standards for keno?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for keno... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.10 What are the minimum internal control standards for... procedures that provide at least the level of control described by the standards in this section, as approved...

  11. 25 CFR 542.14 - What are the minimum internal control standards for the cage?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for the... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.14 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

  12. 25 CFR 542.12 - What are the minimum internal control standards for table games?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for table... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.12 What are the minimum internal control standards for... and/or procedures that provide at least the level of control described by the standards in this...

  13. 25 CFR 542.15 - What are the minimum internal control standards for credit?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.15 What are the minimum internal control standards for... procedures that provide at least the level of control described by the standards in this section, as approved...

  14. Performance of the standard FAIR equipment controller prototype

    International Nuclear Information System (INIS)

    Rauch, S.; Baer, R.C.; Panschow, W.; Thieme, M.

    2012-01-01

    For the control system of the new FAIR accelerator facility a standard equipment controller, the Scalable Control Unit (SCU), is presently under development. First prototypes have already been tested in real applications. The controller combines an *86 COM Express TM Board and an Altera Arria TM II FPGA. Over a parallel bus interface called the SCU bus, up to 12 slave boards can be controlled. Communication between CPU and FPGA is done by a PCIe link. We discuss the real time behaviour between the Linux OS and the FPGA Hardware. For the test, a Front-End Software Architecture (FESA) class, running under Linux, communicates with the PCIe bridge in the FPGA. Although we are using PCIe only for single 32 bit wide accesses to the FPGA address space, the performance still seems sufficient. The tests showed an average response time to IRQs of 50 μs with a 1.6 GHz Intel Atom CPU. This includes the context change to the FESA user space application and the reply back to the FPGA. Further topics are the bandwidth of the PCIe link for single/burst transfers and the performance of the SCU bus communication. (authors)

  15. Predicting casualty-accident count by highway design standards compliance

    Directory of Open Access Journals (Sweden)

    Arief Rizaldi

    2017-09-01

    This study has several findings. First, the constant values of the prediction model are relatively close to the average number of accident which implies that the mere compliance to current standard cannot warrant the safeness of Indoensian highways. Second, the number of median opening per unit length and disturbance level to pedestrian and road reserve area are the features that having positive relationships with total accident count. Meanwhile, the ROW disturbance, conformance of intersection and of road marking also show significant value but negative relationship with total accident count. Third, significant variables for each type of crash may have different sign. For example, in right angle crash, median width has positive relation with the number of accident, while in run off and rear end crash, median width compliance is shown to have negative relation.

  16. Advanced Control Design for Wind Turbines; Part I: Control Design, Implementation, and Initial Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A. D.; Fingersh, L. J.

    2008-03-01

    The purpose of this report is to give wind turbine engineers information and examples of the design, testing through simulation, field implementation, and field testing of advanced wind turbine controls.

  17. Design, optimization, and control of tensegrity structures

    Science.gov (United States)

    Masic, Milenko

    The contributions of this dissertation may be divided into four categories. The first category involves developing a systematic form-finding method for general and symmetric tensegrity structures. As an extension of the available results, different shape constraints are incorporated in the problem. Methods for treatment of these constraints are considered and proposed. A systematic formulation of the form-finding problem for symmetric tensegrity structures is introduced, and it uses the symmetry to reduce both the number of equations and the number of variables in the problem. The equilibrium analysis of modular tensegrities exploits their peculiar symmetry. The tensegrity similarity transformation completes the contributions in the area of enabling tools for tensegrity form-finding. The second group of contributions develops the methods for optimal mass-to-stiffness-ratio design of tensegrity structures. This technique represents the state-of-the-art for the static design of tensegrity structures. It is an extension of the results available for the topology optimization of truss structures. Besides guaranteeing that the final design satisfies the tensegrity paradigm, the problem constrains the structure from different modes of failure, which makes it very general. The open-loop control of the shape of modular tensegrities is the third contribution of the dissertation. This analytical result offers a closed form solution for the control of the reconfiguration of modular structures. Applications range from the deployment and stowing of large-scale space structures to the locomotion-inducing control for biologically inspired structures. The control algorithm is applicable regardless of the size of the structures, and it represents a very general result for a large class of tensegrities. Controlled deployments of large-scale tensegrity plates and tensegrity towers are shown as examples that demonstrate the full potential of this reconfiguration strategy. The last

  18. Design of nuclear spectroscopy electronics based on the EUROsystem standard

    International Nuclear Information System (INIS)

    Pahor, J.

    1987-11-01

    The development of modular nuclear instruments in the EUROcard system has been continued by the design of a staircase generator; such an instrument is needed for accurate testing of spectroscopy amplifiers. The generator provides very precisely defined steps with the period between them varying from 8 to 50 microseconds, the output voltage continuously variable from 2 to 5 V, and attenuated ion steps between 1 and 100. Great care was taken that individual steps exhibit no overshot, thus providing a very clean signal to the input of a tested amplifier. The circuitry is kept simple, and it can be easily constructed in any electronics laboratory. Figs

  19. 75 FR 63462 - Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid...

    Science.gov (United States)

    2010-10-15

    ... Energy Regulatory Commission Smart Grid Interoperability Standards; Notice of Docket Designation for Smart Grid Interoperability Standards October 7, 2010. 1. The Energy Independence and Security Act of... interoperability of smart grid devices and systems, including protocols and model standards for information...

  20. NASA/NBS (National Aeronautics and Space Administration/National Bureau of Standards) standard reference model for telerobot control system architecture (NASREM)

    Science.gov (United States)

    Albus, James S.; Mccain, Harry G.; Lumia, Ronald

    1989-01-01

    The document describes the NASA Standard Reference Model (NASREM) Architecture for the Space Station Telerobot Control System. It defines the functional requirements and high level specifications of the control system for the NASA space Station document for the functional specification, and a guideline for the development of the control system architecture, of the 10C Flight Telerobot Servicer. The NASREM telerobot control system architecture defines a set of standard modules and interfaces which facilitates software design, development, validation, and test, and make possible the integration of telerobotics software from a wide variety of sources. Standard interfaces also provide the software hooks necessary to incrementally upgrade future Flight Telerobot Systems as new capabilities develop in computer science, robotics, and autonomous system control.

  1. How Adults Learn Forms the Foundation of the Learning Designs Standard

    Science.gov (United States)

    Drago-Severson, Eleanor

    2011-01-01

    Learning Forward's new Learning Designs standard is an important reminder that shaping professional learning as opportunities for adults to learn and grow is essential and that one's understanding of how adults learn is an essential component of this pressing goal. This article discusses the three strands of the Learning Designs standard: (1)…

  2. Evaluation of a performance-based standards approach to heavy vehicle design to reduce pavement wear

    CSIR Research Space (South Africa)

    Nordengen, Paul A

    2013-11-01

    Full Text Available of the Australian PBS system while the infrastructure performance standards are based on South African bridge and pavement design standards. In order to optimise road wear per ton of payload, the South African Mechanistic-Empirical Design Method, which is the basis...

  3. 23 CFR 661.53 - What standards should be used for bridge design?

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false What standards should be used for bridge design? 661.53... TRAFFIC OPERATIONS INDIAN RESERVATION ROAD BRIDGE PROGRAM § 661.53 What standards should be used for bridge design? (a) Replacement—A replacement structure must meet the current geometric, construction and...

  4. Standard guide for general design considerations for hot cell equipment

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 Intent: 1.1.1 The intent of this guide is to provide general design and operating considerations for the safe and dependable operation of remotely operated hot cell equipment. Hot cell equipment is hardware used to handle, process, or analyze nuclear or radioactive material in a shielded room. The equipment is placed behind radiation shield walls and cannot be directly accessed by the operators or by maintenance personnel because of the radiation exposure hazards. Therefore, the equipment is operated remotely, either with or without the aid of viewing. 1.1.2 This guide may apply to equipment in other radioactive remotely operated facilities such as suited entry repair areas, canyons or caves, but does not apply to equipment used in commercial power reactors. 1.1.3 This guide does not apply to equipment used in gloveboxes. 1.2 Applicability: 1.2.1 This guide is intended for persons who are tasked with the planning, design, procurement, fabrication, installation, or testing of equipment used in rem...

  5. Solar Power Station Output Inverter Control Design

    Directory of Open Access Journals (Sweden)

    J. Bauer

    2011-04-01

    Full Text Available The photovoltaic applications spreads in these days fast, therefore they also undergo great development. Because the amount of the energy obtained from the panel depends on the surrounding conditions, as intensity of the sun exposure or the temperature of the solar array, the converter must be connected to the panel output. The Solar system equipped with inverter can supply small loads like notebooks, mobile chargers etc. in the places where the supplying network is not present. Or the system can be used as a generator and it shall deliver energy to the supply network. Each type of the application has different requirements on the converter and its control algorithm. But for all of them the one thing is common – the maximal efficiency. The paper focuses on design and simulation of the low power inverter that acts as output part of the whole converter. In the paper the design of the control algorithm of the inverter for both types of inverter application – for islanding mode and for operation on the supply grid – is discussed. Attention is also paid to the design of the output filter that should reduce negative side effects of the converter on the supply network.

  6. Design and validation of a standards-based science teacher efficacy instrument

    Science.gov (United States)

    Kerr, Patricia Reda

    National standards for K--12 science education address all aspects of science education, with their main emphasis on curriculum---both science subject matter and the process involved in doing science. Standards for science teacher education programs have been developing along a parallel plane, as is self-efficacy research involving classroom teachers. Generally, studies about efficacy have been dichotomous---basing the theoretical underpinnings on the work of either Rotter's Locus of Control theory or on Bandura's explanations of efficacy beliefs and outcome expectancy. This study brings all three threads together---K--12 science standards, teacher education standards, and efficacy beliefs---in an instrument designed to measure science teacher efficacy with items based on identified critical attributes of standards-based science teaching and learning. Based on Bandura's explanation of efficacy being task-specific and having outcome expectancy, a developmental, systematic progression from standards-based strategies and activities to tasks to critical attributes was used to craft items for a standards-based science teacher efficacy instrument. Demographic questions related to school characteristics, teacher characteristics, preservice background, science teaching experience, and post-certification professional development were included in the instrument. The instrument was completed by 102 middle level science teachers, with complete data for 87 teachers. A principal components analysis of the science teachers' responses to the instrument resulted in two components: Standards-Based Science Teacher Efficacy: Beliefs About Teaching (BAT, reliability = .92) and Standards-Based Science Teacher Efficacy: Beliefs About Student Achievement (BASA, reliability = .82). Variables that were characteristic of professional development activities, science content preparation, and school environment were identified as members of the sets of variables predicting the BAT and BASA

  7. The renewable portfolio standard: design considerations and an implementation survey

    International Nuclear Information System (INIS)

    Berry, T.; Jaccard, M.

    2001-01-01

    Renewables have social and environmental benefits compared to conventional electricity sources, but are rarely competitive on a strict financial cost basis. This is because conventional sources are sometimes subsidized, their full pollution costs are ignored, and renewables involve newer, higher-cost technologies whose relative costs will fall with commercialization. Governments use several mechanisms to support renewables, including direct financial support (grants, loans), indirect support (R and D, demonstrations), reform of financial costs of conventional sources (subsidy removal, pollution taxes), and the Renewable Portfolio Standard (RPS). The RPS requires a minimum share of electricity from renewable energy sources. Its use is spreading because it maintains an incentive for renewable producers to reduce costs, links the regulated market outcome to an environmental target, and reduces government involvement. Although it is too early to evaluate fully its effectiveness, the survey for this study explored implementation issues in three European countries, nine US states, and Australia, and found the following. The RPS target is usually set to have environmental benefits without causing significant price increases (cost caps are sometimes used). Most jurisdictions limit eligibility to grid-connected, domestic renewables. The RPS is usually applied to producers rather than consumers, and to energy output not capacity. Flexibility mechanisms are desired but a challenge to implement. Administration in the US and Australia is by government with delegation to independent utility regulators, while in Europe it is more the responsibility of government. Everywhere, the RPS is applied alongside other mechanisms of renewables support. (author)

  8. Proposed standardization of assessment protocols for plant molluscicides for use in self-help control programmes.

    Science.gov (United States)

    Brackenbury, T D

    1998-10-01

    Several candidate plant molluscicides have been identified for possible incorporation into self-help control programmes against schistosomiasis, but their full potential has yet to be realised. This has been, in the most part, due to the absence of standardized assessment and toxicity protocols, and subsequently the inability to register crude plant products in their country of origin or internationally. In an attempt to solve this dilemma, a series of protocols has been designed which will provide a useful standardized guideline for investigations into plant molluscicides, as well as precipitate moves towards the establishment of internationally accepted guidelines for the assessment of various categories of plant biopesticides. Ultimately, being able to register a crude plant extract will permit health organizations such as the World Health Organization to promote the use of such material, especially in self-help control programmes, thereby improving the health standards of rural communities.

  9. Developing Standards for Breakthrough Therapy Designation in Oncology

    Science.gov (United States)

    Horning, Sandra J.; Haber, Daniel A.; Selig, Wendy K.D.; Ivy, S. Percy; Roberts, Samantha A.; Allen, Jeff D.; Sigal, Ellen V.; Sawyers, Charles L.

    2013-01-01

    In July 2012, Congress passed the Food and Drug Administration Safety and Innovation Act (FDASIA). The Advancing Breakthrough Therapies for Patients Act was incorporated into a Title of FDASIA to expedite clinical development of new, potential “breakthrough” drugs or treatments that show dramatic responses in early phase studies. Using this regulatory pathway, once a promising new drug candidate is designated as a “Breakthrough Therapy”, the FDA and sponsor would collaborate to determine the best path forward to abbreviate the traditional three-phase approach to drug development. The breakthrough legislation requires that an FDA Guidance be drafted that details specific requirements of the bill to aid FDA in implementing requirements of the Act. In this article, we have proposed criteria to define a product as a Breakthrough Therapy, and discussed critical components of the development process that would require flexibility in order to enable expedited development of a Breakthrough Therapy. PMID:23719260

  10. Exemplary Design Envelope Specification for Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Fernandez, Alisha [McKeown and Associates, Moberly, MO (United States)

    2017-02-01

    Hydropower is an established, affordable renewable energy generation technology supplying nearly 18% of the electricity consumed globally. A hydropower facility interacts continuously with the surrounding water resource environment, causing alterations of varying magnitude in the natural flow of water, energy, fish, sediment, and recreation upstream and downstream. A universal challenge in facility design is balancing the extraction of useful energy and power system services from a stream with the need to maintain ecosystem processes and natural environmental function. On one hand, hydroelectric power is a carbon-free, renewable, and flexible asset to the power system. On the other, the disruption of longitudinal connectivity and the artificial barrier to aquatic movement created by hydraulic structures can produce negative impacts that stress fresh water environments. The growing need for carbon-free, reliable, efficient distributed energy sources suggests there is significant potential for hydropower projects that can deploy with low installed costs, enhanced ecosystem service offerings, and minimal disruptions of the stream environment.

  11. Control-matrix approach to stellarator design and control

    International Nuclear Information System (INIS)

    Mynick, H.E.; Pomphrey, N.

    2000-01-01

    The full space Z always equal to {Zj=1,..Nz} of independent variables defining a stellarator configuration is large. To find attractive design points in this space, or to understand operational flexibility about a given design point, one needs insight into the topography in Z-space of the physics figures of merit Pi which characterize the machine performance, and means of determining those directions in Z-space which give one independent control over the Pi, as well as those which affect none of them, and so are available for design flexibility. The control matrix (CM) approach described here provides a mathematical means of obtaining these. In this work, the authors describe the CM approach and use it in studying some candidate Quasi-Axisymmetric (QA) stellarator configurations the NCSX design group has been considering. In the process of the analysis, a first exploration of the topography of the configuration space in the vicinity of these candidate systems has been performed, whose character is discussed

  12. Design of common software for quality control of SPECT

    International Nuclear Information System (INIS)

    Li Xiaohua; Gao Ruzhen; Chen Shengzu

    1993-01-01

    The goal of this study is to design a common testing system for SPECT quality control according to NEMA standard. Using the system, the performances of different types of SPECT can be tested, so that the acceptance testing, performance comparing and routine quality control for SPECT can be normalized. The system was based on IBM PC series of microcomputer. Testing data are acquired from various types of SPECT, then transferred into IBM PC through interface and tested with an unique testing program. Two parts were included: interface and SPECT testing program. It emphatically studied the managing program of RS232 interface, designing skills and the mathematic patterns of SPECT testing program. The system which was composed of 11 subroutines can be used to measure the performances for both gamma camera and SPECT. The system was tested on OMEGA 500/MCS 560 SPECT and the results showed that it is effective, accurate and easy to use

  13. The modular design method for digital control systems in Japanese BWRs

    International Nuclear Information System (INIS)

    Kondoh, Y.; Motomura, A.

    1998-01-01

    Digital technology is being applied to control systems in nuclear power plants. Especially in Japanese BWRs, control systems are being digitized both in constructing plant and in retrofit of operating plants. Digital technology has many advantages compared with analog technology. However, its high performance and flexibility may result in too complicated software structure, which will cause long design time and long testing time and increase cost. In introduction of digital technology, it is most important to restrict unnecessary flexibility of software. The function of control systems can be divided in standard part and variable part. Standard function may be common to every plant while variable function should be designed for each plant. Even in current design, standard design is preserved to be reused in next application. However, this design approach is not always effective because standard function may be changed by customer and nothing is considered for variable part even if it is large. To keep reliability and reduce cost by software reuse, Toshiba adopts modular design of control software, where standard part is designed as a set of standard functional modules and variable function is designed as a complex of standard functional modules and plant unique modules. Toshiba firstly applied modular design method to fuel handling machine control system. In this application the design work has been reduced to 30 percent by reusing of functional module which was first developed in former applications. This remarkable reduction of design work has enhanced reliability with less cost. In addition, software, has been produced and tested according to the functional module. These qualified software modules will be applied to next system and will realize highest reliability and least cost. Toshiba is now planning the application of this modular design method for every digital control system. (author)

  14. Modern control room design experience and speculation

    International Nuclear Information System (INIS)

    Smith, J.E.

    1993-01-01

    Can operators trained to use conventional control panels readily adapt to CRT based control rooms? Does automation make the design of good man-machine interfaces more or less difficult? In a conventional, hard-wired control room is the operator's peripheral vision always an asset and how can one do better in a CRT based control room? Are Expert System assisted man-machine interfaces a boon or a bust? This paper explores these questions in the light of actual experience with advanced power plant control environments. This paper discusses how automation has in fact simplified the problem of ensuring that the operator has at all times a clear understanding of the plant state. The author contends that conventional hard-wired control rooms are very poor at providing the operator with a good overview of the plant status particularly under startup, or upset conditions and that CRT-based control rooms offer an opportunity for improvement. Experience with some early attempts at this are discussed together with some interesting proposals from other authors. Finally the paper discusses the experience to date with expert system assisted man-machine interfaces. Although promising for the future progress has been slow. The amount of knowledge research required is often formidable and consequently costly. Often when an adequate knowledge base is finally acquired it turns out to be better to use it to increase the level of automation and thus simplify the operator's task. The risks are not any greater and automation offers more consistent operation. It is important also to carefully distinguish between expert system assisted display selection and expert system operator guidance. The first is intended to help the operator in his quest for information. The second attempts to guide the operator actions. The good and the bad points of each of these approaches is discussed

  15. Standards for reporting randomized controlled trials in neurosurgery.

    Science.gov (United States)

    Kiehna, Erin N; Starke, Robert M; Pouratian, Nader; Dumont, Aaron S

    2011-02-01

    The Consolidated Standards for Reporting of Trials (CONSORT) criteria were published in 1996 to standardize the reporting and improve the quality of clinical trials. Despite having been endorsed by major medical journals and shown to improve the quality of reported trials, neurosurgical journals have yet to formally adopt these reporting criteria. The purpose of this study is to evaluate the quality and reporting of randomized controlled trials (RCTs) in neurosurgery and the factors that may affect the quality of reported trials. The authors evaluated all neurosurgical RCTs published in 2006 and 2007 in the principal neurosurgical journals (Journal of Neurosurgery; Neurosurgery; Surgical Neurology; Journal of Neurology, Neurosurgery, and Psychiatry; and Acta Neurochirurgica) and in 3 leading general medical journals (Journal of the American Medical Association, Lancet, and the New England Journal of Medicine). Randomized controlled trials that addressed operative decision making or the treatment of neurosurgical patients were included in this analysis. The RCT quality was evaluated using the Jadad score and the CONSORT checklist. In 2006 and 2007, 27 RCTs relevant to intracranial neurosurgery were reported. Of these trials, only 59% had a Jadad score ≥ 3. The 3 major medical journals all endorsed the CONSORT guidelines, while none of the neurosurgical journals have adopted these guidelines. Randomized controlled trials published in the 3 major medical journals had a significantly higher mean CONSORT score (mean 41, range 39-44) compared with those published in neurosurgical journals (mean 26.4, range 17-38; p journals (mean 3.42, range 2-5) than neurosurgical journals (mean 2.45, range 1-5; p = 0.05). Despite the growing volume of RCTs in neurosurgery, the quality of reporting of these trials remains suboptimal, especially in the neurosurgical journals. Improved awareness of the CONSORT guidelines by journal editors, reviewers, and authors of these papers could

  16. Design, fabrication and control of soft robots

    Science.gov (United States)

    Rus, Daniela; Tolley, Michael T.

    2015-05-01

    Conventionally, engineers have employed rigid materials to fabricate precise, predictable robotic systems, which are easily modelled as rigid members connected at discrete joints. Natural systems, however, often match or exceed the performance of robotic systems with deformable bodies. Cephalopods, for example, achieve amazing feats of manipulation and locomotion without a skeleton; even vertebrates such as humans achieve dynamic gaits by storing elastic energy in their compliant bones and soft tissues. Inspired by nature, engineers have begun to explore the design and control of soft-bodied robots composed of compliant materials. This Review discusses recent developments in the emerging field of soft robotics.

  17. An automated tool for evaluating compliance and providing assistance with building energy standards during design

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.; Brambley, M.R.; Stratton, R.C.

    1992-04-30

    In an effort to encourage the maximum cost-effective level of energy efficiency in new building design, energy-efficiency standards have become more location-specific and performance-based. As a result, standards often provide more than one path for ensuring and demonstrating that a design complies, but at the cost of increased complexity. In addition, the burden of remedying a noncompliant design rests on the designers` knowledge and experience, with only general guidance provided by the standards. As part of efforts in the US Department of Energy`s (DOE`s) Advanced Energy Design and Operation Technologies (AEDOT) project, a team at DOE`s Pacific Northwest Laboratory is developing a computer program known as the Energy Standards Intelligent Design Tool (ES-IDT). The ES-IDT is one component of a prototype computer-based building design environment. It performs automatic compliance checking for parts of ASHRAE/IES Standard 90.1-1989 and provides designers assistance in bringing noncomplying designs into compliance. This paper describes the ES-IDT, the functions it provides, and how it is integrated into the design process via the AEDOT prototype building design environment. 9 refs.

  18. An automated tool for evaluating compliance and providing assistance with building energy standards during design

    Energy Technology Data Exchange (ETDEWEB)

    Quadrel, R.W.; Brambley, M.R.; Stratton, R.C.

    1992-04-30

    In an effort to encourage the maximum cost-effective level of energy efficiency in new building design, energy-efficiency standards have become more location-specific and performance-based. As a result, standards often provide more than one path for ensuring and demonstrating that a design complies, but at the cost of increased complexity. In addition, the burden of remedying a noncompliant design rests on the designers' knowledge and experience, with only general guidance provided by the standards. As part of efforts in the US Department of Energy's (DOE's) Advanced Energy Design and Operation Technologies (AEDOT) project, a team at DOE's Pacific Northwest Laboratory is developing a computer program known as the Energy Standards Intelligent Design Tool (ES-IDT). The ES-IDT is one component of a prototype computer-based building design environment. It performs automatic compliance checking for parts of ASHRAE/IES Standard 90.1-1989 and provides designers assistance in bringing noncomplying designs into compliance. This paper describes the ES-IDT, the functions it provides, and how it is integrated into the design process via the AEDOT prototype building design environment. 9 refs.

  19. Orifice design for the control of coupled region flow

    International Nuclear Information System (INIS)

    Atherton, R.; Spadaro, P.R.; Brummerhop, F.G.

    1975-01-01

    A fluid system arrangement for nuclear reactors is described comprising a triplate orifice apparatus which simultaneously controls core flow distribution, flow rate ratio between hydraulically coupled regions of the blanket and radial static pressure gradients entering and leaving the blanket fuel region. The design of the apparatus is based on the parameters of the diameter of the orifice holes, the friction factor, and expansion, contraction and turning pressure loss coefficients of the geometry of each orifice region. These above parameters are properly matched to provide the desired pressure drop, flow split and negligible cross flow at the interface of standard and power-flattened open lattice blanket regions. (U.S.)

  20. Matched survival data in a co-twin control design

    DEFF Research Database (Denmark)

    Gerster, Mette; Madsen, Mia; Andersen, Per Kragh

    2014-01-01

    When using the co-twin control design for analysis of event times, one needs a model to address the possible within-pair association. One such model is the shared frailty model in which the random frailty variable creates the desired within-pair association. Standard inference for this model...... requires independence between the random effect and the covariates. We study how violations of this assumption affect inference for the regression coefficients and conclude that substantial bias may occur. We propose an alternative way of making inference for the regression parameters by using a fixed...

  1. Standard hazard analysis, critical control point and hotel management

    Directory of Open Access Journals (Sweden)

    Vujačić Vesna

    2017-01-01

    Full Text Available Tourism is a dynamic category which is continuously evolving in the world. Specificities that have to be respected in the execution in relation to the food industry are connected with the fact that the main differences which exist regarding the food serving procedure in catering, numerous complex recipes and production technologies, staff fluctuation, old equipment. For an effective and permanent implementation, the HACCP concept is very important for building a serious base. In this case, the base is represented by the people handling the food. This paper presents international ISO standards, the concept of HACCP and the importance of its application in the tourism and hospitality industry. The concept of HACCP is a food safety management system through the analysis and control of biological, chemical and physical hazards in the entire process, from raw material production, procurement, handling, to manufacturing, distribution and consumption of the finished product. The aim of this paper is to present the importance of the application of HACCP concept in tourism and hotel management as a recognizable international standard.

  2. New Design Concept for Universal CCD Controller

    Directory of Open Access Journals (Sweden)

    Wonyong Han

    1994-06-01

    Full Text Available Currently, the CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However according to the recent technical advances, new large format CCDs are rapidly developed which have better performances with higher quantum efficiency and sensitivity. In many cases, some microprocessors have been adopted to deal with necessary digital logic for a CCD imaging system. This could often lack the flexibility of a system for a user to upgrade with new devices, especially of it is a commercial product. A new design concept has been explored which could provide the opportunity to deal with any format of devices from ant manufactures effectively for astronomical purposes. Recently available PLD (Programmable Logic Devices technology makes it possible to develop such digital circuit design, which can be integrated into a single component, instead of using microprocessors. The design concept could dramatically increase the efficiency and flexibility of a CCD imaging system, particularly when new or large format devices are available and to upgrade the performance of a system. Some variable system control parameters can be selected by a user with a wider range of choice. The software can support such functional requirements very conveniently. This approach can be applied not only to astronomical purpose, but also to some related fields, such as remote sensing and industrial applications.

  3. Ground control station software design for micro aerial vehicles

    Science.gov (United States)

    Walendziuk, Wojciech; Oldziej, Daniel; Binczyk, Dawid Przemyslaw; Slowik, Maciej

    2017-08-01

    This article describes the process of designing the equipment part and the software of a ground control station used for configuring and operating micro unmanned aerial vehicles (UAV). All the works were conducted on a quadrocopter model being a commonly accessible commercial construction. This article contains a characteristics of the research object, the basics of operating the micro aerial vehicles (MAV) and presents components of the ground control station model. It also describes the communication standards for the purpose of building a model of the station. Further part of the work concerns the software of the product - the GIMSO application (Generally Interactive Station for Mobile Objects), which enables the user to manage the actions and communication and control processes from the UAV. The process of creating the software and the field tests of a station model are also presented in the article.

  4. International standards and quality control procedures applied to nuclear instruments

    International Nuclear Information System (INIS)

    Urbanski, P.

    2008-01-01

    The survey of international standards related to Nuclear Instrumentation and QC tests was presented. From among the 29'336 active international standards published by such organizations as ISO, IEC, CEN and CENELEC, only 582 are devoted to nuclear instruments. The international classification of standards (ICS) is shown. Also, the list of 582 international standards related to nuclear instruments is attached. (author)

  5. 76 FR 14437 - Economic Simplified Boiling Water Reactor Standard Design: GE Hitachi Nuclear Energy; Issuance of...

    Science.gov (United States)

    2011-03-16

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0055] Economic Simplified Boiling Water Reactor Standard Design: GE Hitachi Nuclear Energy; Issuance of Final Design Approval The U.S. Nuclear Regulatory Commission has issued a final design approval (FDA) to GE Hitachi Nuclear Energy (GEH) for the economic...

  6. Combining economic and social goals in the design of production systems by using ergonomics standards

    NARCIS (Netherlands)

    J. Dul (Jan); H.J. de Vries (Henk); S. Verschoof (Sandra); W. Eveleens (Wietske); A. Feilzer (Albert)

    2004-01-01

    textabstractIn designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational

  7. 75 FR 71033 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

    Science.gov (United States)

    2010-11-22

    ... Nebraska. Street, Kansas City, KS 66101-2907, (913) 551-7606. Monica Morales, Leader, Air Quality Colorado..., C, and E are used in design value calculations.\\5\\ In some cases, states requested unclassifiable designations for areas around monitors with a design value exceeding the standard. EPA does not believe such a...

  8. Systems approach for design control at Monitored Retrievable Storage Project

    International Nuclear Information System (INIS)

    Kumar, P.N.; Williams, J.R.

    1994-01-01

    This paper describes the systems approach in establishing design control for the Monitored Retrievable Storage Project design development. Key elements in design control are enumerated and systems engineering aspects are detailed. Application of lessons learned from the Yucca Mountain Project experience is addressed. An integrated approach combining quality assurance and systems engineering requirements is suggested to practice effective design control

  9. Applying Standard Interfaces to a Process-Control Language

    Science.gov (United States)

    Berthold, Richard T.

    2005-01-01

    A method of applying open-operating-system standard interfaces to the NASA User Interface Language (UIL) has been devised. UIL is a computing language that can be used in monitoring and controlling automated processes: for example, the Timeliner computer program, written in UIL, is a general-purpose software system for monitoring and controlling sequences of automated tasks in a target system. In providing the major elements of connectivity between UIL and the target system, the present method offers advantages over the prior method. Most notably, unlike in the prior method, the software description of the target system can be made independent of the applicable compiler software and need not be linked to the applicable executable compiler image. Also unlike in the prior method, it is not necessary to recompile the source code and relink the source code to a new executable compiler image. Abstraction of the description of the target system to a data file can be defined easily, with intuitive syntax, and knowledge of the source-code language is not needed for the definition.

  10. design and construction of a water heater controller

    African Journals Online (AJOL)

    DESIGN AND CONSTRUCTION OF A WATER HEATER CONTROLLER. ... In this design, a real time emulator driven by software controls a water heater using a micro-controller. Keywords. Micro-controller, geyser, keypad, interface, design, construction. African Journal of Science and Technology Vol.5(1) 2004: 1-5.

  11. Introduction to multicopter design and control

    CERN Document Server

    Quan, Quan

    2017-01-01

    This book is the first textbook specially on multicopter systems in the world. It provides a comprehensive overview of multicopter systems, rather than focusing on a single method or technique. The fifteen chapters are divided into five parts, covering the topics of multicopter design, modeling, state estimation, control, and decision-making. It differs from other books in the field in three major respects: it is basic and practical, offering self-contained content and presenting hands-on methods; it is comprehensive and systematic; and it is timely. It is also closely related to the autopilot that users often employ today and provides insights into the code employed. As such, it offers a valuable resource for anyone interested in multicopters, including students, teachers, researchers, and engineers.

  12. Design control--the ultimate protection?

    Science.gov (United States)

    Hendra, I R

    1991-04-01

    Over the last decade or so, medical device manufacturers with customers in the United States and the United Kingdom should have discovered the benefits of using quality systems in their manufacturing process. Both the American GMP Regulations (21 CFR-820)--enforced by the U.S. Food and Drug Administration (FDA)--and the U.K. Department of Health Guides to Good Manufacturing Practice based upon BS 5750: Part I (1979)--enforced through the National Health Service supply chain-- have been applied with the objective of ensuring the availability of safe and effective medical devices. This article examines the design control aspects of a quality system and asks whether the medical device industry should be suspicious of third-party assessments of confidential documentation.

  13. Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

    Science.gov (United States)

    Woo, E H C; White, P; Lai, C W K

    2016-03-01

    This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

  14. Blinded sample size re-estimation in three-arm trials with 'gold standard' design.

    Science.gov (United States)

    Mütze, Tobias; Friede, Tim

    2017-10-15

    In this article, we study blinded sample size re-estimation in the 'gold standard' design with internal pilot study for normally distributed outcomes. The 'gold standard' design is a three-arm clinical trial design that includes an active and a placebo control in addition to an experimental treatment. We focus on the absolute margin approach to hypothesis testing in three-arm trials at which the non-inferiority of the experimental treatment and the assay sensitivity are assessed by pairwise comparisons. We compare several blinded sample size re-estimation procedures in a simulation study assessing operating characteristics including power and type I error. We find that sample size re-estimation based on the popular one-sample variance estimator results in overpowered trials. Moreover, sample size re-estimation based on unbiased variance estimators such as the Xing-Ganju variance estimator results in underpowered trials, as it is expected because an overestimation of the variance and thus the sample size is in general required for the re-estimation procedure to eventually meet the target power. To overcome this problem, we propose an inflation factor for the sample size re-estimation with the Xing-Ganju variance estimator and show that this approach results in adequately powered trials. Because of favorable features of the Xing-Ganju variance estimator such as unbiasedness and a distribution independent of the group means, the inflation factor does not depend on the nuisance parameter and, therefore, can be calculated prior to a trial. Moreover, we prove that the sample size re-estimation based on the Xing-Ganju variance estimator does not bias the effect estimate. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  15. Seismic design of nuclear power plants in Japan with consideration of standardization

    International Nuclear Information System (INIS)

    Watabe, M.; Tanaka, H.; Kato, M.; Tohdo, M.

    1981-01-01

    This paper presents the aseismic design approach and process for prototypes of the standard Light Water Reactor, which have been conducted in the committee of the Ministry of International Trade and Industry. (orig./HP)

  16. 77 FR 3070 - Electric Engineering, Architectural Services, Design Policies and Construction Standards

    Science.gov (United States)

    2012-01-23

    ... Engineering, Architectural Services, Design Policies and Construction Standards AGENCY: Rural Utilities..., engineering services and architectural services for transactions above the established threshold dollar levels... Code of Federal Regulations as follows: PART 1724--ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND...

  17. Modified Standard Penetration Test–based Drilled Shaft Design Method for Weak Rocks (Phase 2 Study)

    Science.gov (United States)

    2017-12-15

    In this project, Illinois-specific design procedures were developed for drilled shafts founded in weak shale or rock. In particular, a modified standard penetration test was developed and verified to characterize the in situ condition of weak shales ...

  18. Design and quality control of an environmental data acquisition system

    International Nuclear Information System (INIS)

    FANJIRINDRATOVO, T.

    2009-01-01

    The present work is focused on the design of a microcontroller based measurement system and the control quality to validate it. So, a mobile instrument called DALENPA was designed to measure and log the following data: atmospheric pressure, ambient temperature, relative humidity, wind speed and direction, air dose rate, geographical coordinates by an embedded GPS receiver. The instrument is autonomous in energy by solar panel and can be connected to a PC directly or by modem. After, the quality control is based on the calibartion in a secondary laboratory. The target is to get its calibration curve and the estimation of global uncertainties. This estimation wants to include all sources of uncertainty belonging to the instrument and the secondary laboratory, and follows the method estabilished by the International Organization for Standardization (ISO) and the Bureau International des Poids et Mesures (BIPM). The calibration curve is fitted by the least squares method with uncertainties in the two variables. We got an efficient instrument with uncertainties under the limits estabilished by the regulating standards [fr

  19. The evolution of IRRR nuclear standards from the single failure criterion and their impact on system design

    International Nuclear Information System (INIS)

    Clark, D.H.

    1978-01-01

    One of the first industry standards developed in the United States to meet regulatory agency criteria for the design and installation of nuclear power plant control and instrumentation systems was prepared by the Institute of Electrical and Electronics Engineers, Inc., abbreviated IEEE. This was IEEE Std. 279, first issued in 1968. It was subsequently revised and reissued as IEEE Std. 279-1971 ''IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating Stations''. Not only has the implementation of this standard had a tremendous impact on nuclear power plant design in the United States, it has been the base document from which subsequent IEEE nuclear standards have been developed. Three major concepts which are addressed by IEEE 279, and which have had a major impact upon control and instrumentation systems in nuclear power plants are the following : 1) Single failure criterion. 2) Equipment qualification. 3) Channel independence. Each of these concepts has resulted in the development of subsequent IEEE Nuclear Standards. The impact of some of these on control and instrumentation systems are discussed. (author)

  20. Designing Laser Pulses to Control Molecular Motion

    Science.gov (United States)

    Ren, Qinghua; Balint-Kurti, Gabriel; Manby, Frederick; Artamonov, Maxim; Ho, Tak-San; Rabitz, Herschel

    2006-03-01

    A new method for incorporating polarization effects of the strong electric field into optimal control calculations is presented. An Electric-Nuclear Born-Oppenheimer approximation is introduced in which both the nuclear motion and the fluctuations of the external electric field are assumed to be slow compared with the speed at which the electronic wavefunction responds to these changes, which permits the generation of a potential energy surface that depends not only on the geometry of the nuclei, but also on the electric field strength and on the orientation of the molecule with respect to the electric field. As an illustration, it is firstly applied to the optimal control of the vibrational excitation of a hydrogen molecule aligned along with the field direction.^ [1] And then it is extended to full three dimensions by allowing the H2 molecules to rotate as well as vibrate.^ [2] All calculation results show that it is possible to design shaped laser pulses that can excite H2 either vibrationally, rotationally or both with a probability higher than 90%. ^[1] G. G. Balint-kurti, F. R. Manby, Q. Ren, M. Artamonov, T. Ho, and H. Rabitz, J. Chem. Phys. 122, 084110 (2005). ^[2] Q. Ren, G. G. Balint-kurti, F. R. Manby, M. Artamonov, T. Ho, and H. Rabitz, J. Chem. Phys. (in press).

  1. Analysis and design of networked control systems

    CERN Document Server

    You, Keyou; Xie, Lihua

    2015-01-01

    This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as: ·         minimum data rate for stabilization of linear systems over noisy channels; ·         minimum network requirement for stabilization of linear systems over fading channels; and ·         stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are de...

  2. JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

    Science.gov (United States)

    Avila, Arturo

    2011-01-01

    The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

  3. Effect of the standard design of forest roads clearing limit on stand ...

    African Journals Online (AJOL)

    Aidin

    In this research the standard design of clearing limit was determined based on soil texture and hillside gradient. ... clearing limit as well as the difference between standard and existing trees stock growth in different slope classes and soil ..... clearings on movement patterns of understory rainforest birds in central Amazonia.

  4. Standard formatted data units-control authority procedures

    Science.gov (United States)

    1991-01-01

    The purpose of this document is to establish a set of minimum and optional requirements for the implementation of Control Authority (CA) organizations within and among the Agencies participating in the Consultative Committee for Space Data Systems (CCSDS). By satisfying these requirements, the resultant cooperating set of CA organizations will produce a global CA service supporting information transfer with digital data under the Standard Formatted Data Unit (SFDU) concept. This service is primarily accomplished through the registration, permanent archiving, and dissemination of metadata in the form of Metadata Objects (MDO) that assist in the interpretation of data objects received in SFDU form. This Recommendation addresses the responsibilities, services, and interface protocols for a hierarchy of CA organizations. The top level, consisting of the CCSDS Secretariat and its operational agent, is unique and primarily provides a global coordination function. The lower levels are Agency CA organizations that have primary responsibility for the registration, archiving, and dissemination of MDOs. As experience is gained and technology evolves, the CA Procedures will be extended to include enhanced services and their supporting protocols. In particular, it is anticipated that eventually CA organizations will be linked via networks on a global basis, and will provide requestors with online automated access to CA services. While this Recommendation does not preclude such operations, it also does not recommend the specific protocols to be used to ensure global compatibility of these services. These recommendations will be generated as experience is gained.

  5. Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

    Science.gov (United States)

    Lee, F. C.; Mahmoud, M. F.; Yu, Y.

    1980-01-01

    The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

  6. Case studies on design, simulation and visualization of control and measurement applications using REX control system

    Science.gov (United States)

    Ozana, Stepan; Pies, Martin; Docekal, Tomas

    2016-06-01

    REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

  7. Case studies on design, simulation and visualization of control and measurement applications using REX control system

    International Nuclear Information System (INIS)

    Ozana, Stepan; Pies, Martin; Docekal, Tomas

    2016-01-01

    REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

  8. Case studies on design, simulation and visualization of control and measurement applications using REX control system

    Energy Technology Data Exchange (ETDEWEB)

    Ozana, Stepan, E-mail: stepan.ozana@vsb.cz; Pies, Martin, E-mail: martin.pies@vsb.cz; Docekal, Tomas, E-mail: docekalt@email.cz [VSB-Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Department of Cybernetics and Biomedical Engineering, 17. listopadu 15/2172, Ostrava-Poruba, 700 30 (Czech Republic)

    2016-06-08

    REX Control System is a professional advanced tool for design and implementation of complex control systems that belongs to softPLC category. It covers the entire process starting from simulation of functionality of the application before deployment, through implementation on real-time target, towards analysis, diagnostics and visualization. Basically it consists of two parts: the development tools and the runtime system. It is also compatible with Simulink environment, and the way of implementation of control algorithm is very similar. The control scheme is finally compiled (using RexDraw utility) and uploaded into a chosen real-time target (using RexView utility). There is a wide variety of hardware platforms and real-time operating systems supported by REX Control System such as for example Windows Embedded, Linux, Linux/Xenomai deployed on SBC, IPC, PAC, Raspberry Pi and others with many I/O interfaces. It is modern system designed both for measurement and control applications, offering a lot of additional functions concerning data archiving, visualization based on HTML5, and communication standards. The paper will sum up possibilities of its use in educational process, focused on control of case studies of physical models with classical and advanced control algorithms.

  9. 77 FR 32645 - Revision of Performance Standards for State Medicaid Fraud Control Units

    Science.gov (United States)

    2012-06-01

    ...] Revision of Performance Standards for State Medicaid Fraud Control Units AGENCY: Office of Inspector... Fraud Control Units (MFCU or Unit). These standards replace and supersede standards published on... Association of Medicaid Fraud Control Units (the Association), which submitted extensive comments on each of...

  10. 78 FR 22263 - Advisory Council on the Standards for Internal Control in the Federal Government; Meeting

    Science.gov (United States)

    2013-04-15

    ... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... Standards for Internal Control in the Federal Government; Notice of Meeting. SUMMARY: The US Government Accountability Office (GAO) is initiating efforts to revise the Standards for Internal Control in the Federal...

  11. 78 FR 68447 - Exposure Draft-Standards for Internal Control in the Federal Government

    Science.gov (United States)

    2013-11-14

    ... GOVERNMENT ACCOUNTABILITY OFFICE Exposure Draft--Standards for Internal Control in the Federal... revisions to the Standards for Internal Control in the Federal Government, known as the ``Green Book,'' to... proposed changes contained in the 2013 Exposure Draft update to the Standards for Internal Control in the...

  12. 78 FR 52532 - Exposure Draft-Standards for Internal Control in the Federal Government

    Science.gov (United States)

    2013-08-23

    ... GOVERNMENT ACCOUNTABILITY OFFICE Exposure Draft--Standards for Internal Control in the Federal... to the Standards for Internal Control in the Federal Government, known as the ``Green Book,'' under... Exposure Draft update to the Standards for Internal Control in the Federal Government reflect major...

  13. 76 FR 53817 - Minimum Internal Control Standards for Class II Gaming

    Science.gov (United States)

    2011-08-30

    ... Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission, Interior. ACTION... superseded specified sections of established Minimum Internal Control Standards and replaced them with a new part titled Minimum Internal Control Standards Class II Gaming, that was published in the Federal...

  14. 40 CFR 1700.14 - Marine Pollution Control Device (MPCD) Performance Standards. [Reserved

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Marine Pollution Control Device (MPCD... UNIFORM NATIONAL DISCHARGE STANDARDS FOR VESSELS OF THE ARMED FORCES Marine Pollution Control Device (MPCD) Performance Standards § 1700.14 Marine Pollution Control Device (MPCD) Performance Standards. [Reserved] ...

  15. California residential energy standards: problems and recommendations relating to implementation, enforcement, and design. [Thermal insulation

    Energy Technology Data Exchange (ETDEWEB)

    1977-08-01

    Documents relevant to the development and implementation of the California energy insulation standards for new residential buildings were evaluated and a survey was conducted to determine problems encountered in the implementation, enforcement, and design aspects of the standards. The impact of the standards on enforcement agencies, designers, builders and developers, manufacturers and suppliers, consumers, and the building process in general is summarized. The impact on construction costs and energy savings varies considerably because of the wide variation in prior insulation practices and climatic conditions in California. The report concludes with a series of recommendations covering all levels of government and the building process. (MCW)

  16. Standardization of Experimental Design for Crop Cultivation in Life Support Systems for Space Exploration

    Science.gov (United States)

    Wolff, Silje Aase; Coelho, Liz Helena; Karoliussen, Irene; Kittang Jost, Ann-Iren

    Due to logistical challenges, long-term human space exploration missions require a life support system capable of regenerating all the essentials for survival. Higher plants can be utilized to provide a continuous supply of fresh food, fresh air, and clean water for humans. The extensive work performed have shown that higher plants are able to adapt to space conditions in low Earth orbit, at least from one generation from seed to seed. Since the hardware has turned out to be of great importance for the results in microgravity research, full environmental monitoring and control must be the standard for future experiments. Selecting a few model plants, including crop plants for life support, would further increase the comparability between studies. The European Space Agency (ESA) has developed the Micro-Ecological Life Support System Alternative (MELiSSA) program to develop a closed regenerative life support system, based on micro-organisms and higher plants, with continuous recycling of resources. In the present study, recommended standardization of the experimental design for future scientific work assessing the effects of graded gravity on plant metabolism will be presented. This includes the environmental conditions required for cultivation of the selected MEliSSA species (wheat, bread wheat, soybean and potato), as well as guidelines for sowing, plant handling and analysis. Keywords: microgravity; magnetic field; radiation; MELiSSA; Moon; Mars.

  17. Design of a semi-custom integrated circuit for the SLAC SLC timing control system

    International Nuclear Information System (INIS)

    Linstadt, E.

    1984-10-01

    A semi-custom (gate array) integrated circuit has been designed for use in the SLAC Linear Collider timing and control system. The design process and SLAC's experiences during the phases of the design cycle are described. Issues concerning the partitioning of the design into semi-custom and standard components are discussed. Functional descriptions of the semi-custom integrated circuit and the timing module in which it is used are given

  18. Pseudo Open Drain IO Standards Based Energy Efficient Solar Charge Sensor Design on 20nm FPGA

    DEFF Research Database (Denmark)

    Kalia, K; Pandey, B; Nanda, K

    2015-01-01

    In this paper an approach is made to design Pseudo open drain IO standards Based Energy efficient solar charge sensor design on 20nm and 28nm technology. We have used LVCMOS18, POD10, POD10_DCI and POD12 I/O standard. In this design, we have taken two main parameters for analysis...... solar charge inverter. We also observed maximum total power reduction in LVCMOS18 (Artix-7 FPGA) as compared to other I/O standards at 10 GHz. Also there is maximum total power reduction in POD12 (Ultra Scale Kintex) as compared to other I/O standards at 2 GHz. There is also a significant change...... in device static, I/O power and Clock Power....

  19. A brief comparison of existing regional green building design standards in China

    Science.gov (United States)

    Wang, J.; Liu, Y.; Ren, J.; Cho, S.

    2017-03-01

    A large country with a variety of regional natural, cultural and economic conditions, China has established a number of green building design (GBD) standards both at national and regional (provincial and municipal) levels. Some researches have been conducted to review and compare such standards. The main aim was to provide valuable references for the establishment of new regionally specific GBD standards in different regions of the country. This paper introduces the preliminary results of the researches. The distribution, frameworks and content of the existing regional GBD standards are introduced and compared in relating to the regionally specific climate, resource, economic and cultural conditions. Conclusions are provided and further researches are recommended.

  20. Compressive Feedback Control Design for Spatially Distributed Systems

    Science.gov (United States)

    2017-01-03

    AFRL-AFOSR-VA-TR-2017-0004 Compressive Feedback Control Design for Spatially Distributed Systems Nader Motee LEHIGH UNIVERSITY 526 BRODHEAD AVE...0158 Compressive Feedback Control Design for Spatially Distributed Systems Program Manager: Dr. Frederick A. Leve Principle Investigator: Nader Motee...Feedback Control Design for Spatially Distributed Systems Summary of Accomplishments and Research Results 1 Systemic Performance and Robustness

  1. Tools for Nonlinear Control Systems Design

    Science.gov (United States)

    Sastry, S. S.

    1997-01-01

    This is a brief statement of the research progress made on Grant NAG2-243 titled "Tools for Nonlinear Control Systems Design", which ran from 1983 till December 1996. The initial set of PIs on the grant were C. A. Desoer, E. L. Polak and myself (for 1983). From 1984 till 1991 Desoer and I were the Pls and finally I was the sole PI from 1991 till the end of 1996. The project has been an unusually longstanding and extremely fruitful partnership, with many technical exchanges, visits, workshops and new avenues of investigation begun on this grant. There were student visits, long term.visitors on the grant and many interesting joint projects. In this final report I will only give a cursory description of the technical work done on the grant, since there was a tradition of annual progress reports and a proposal for the succeeding year. These progress reports cum proposals are attached as Appendix A to this report. Appendix B consists of papers by me and my students as co-authors sorted chronologically. When there are multiple related versions of a paper, such as a conference version and journal version they are listed together. Appendix C consists of papers by Desoer and his students as well as 'solo' publications by other researchers supported on this grant similarly chronologically sorted.

  2. The CANDU 9 distributed control system design process

    International Nuclear Information System (INIS)

    Harber, J.E.; Kattan, M.K.; Macbeth, M.J.

    1997-01-01

    Canadian designed CANDU pressurized heavy water nuclear reactors have been world leaders in electrical power generation. The CANDU 9 project is AECL's next reactor design. Plant control for the CANDU 9 station design is performed by a distributed control system (DCS) as compared to centralized control computers, analog control devices and relay logic used in previous CANDU designs. The selection of a DCS as the platform to perform the process control functions and most of the data acquisition of the plant, is consistent with the evolutionary nature of the CANDU technology. The control strategies for the DCS control programs are based on previous CANDU designs but are implemented on a new hardware platform taking advantage of advances in computer technology. This paper describes the design process for developing the CANDU 9 DCS. Various design activities, prototyping and analyses have been undertaken in order to ensure a safe, functional, and cost-effective design. (author)

  3. The safety relief valve handbook design and use of process safety valves to ASME and International codes and standards

    CERN Document Server

    Hellemans, Marc

    2009-01-01

    The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. . No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves. . The Safety Valve Handbook contains all of the vital technical and standards informat...

  4. Robust System Identification and Control Design

    National Research Council Canada - National Science Library

    Zhou, Kemin

    2001-01-01

    ..., some advanced nonlinear control techniques including bifurcation stabilization and compressor stabilization techniques, model reduction techniques, fault detection and fault tolerant control methods...

  5. Analysis and design of 40 m high steel chimney according to Eurocode and SRPS standards

    Directory of Open Access Journals (Sweden)

    Bešević Miroslav T.

    2015-01-01

    Full Text Available This paper presents structural analysis according to Eurocode and SRPS standards. Analysed construction is 40 m high steel chimney, made of 33 m long upper circular cross-section segment of constant diameter D=1834 mm and bottom variable circular cross-section segment of D=2234 mm on the foundation level. Wind loads are dominant loads for this kind of structures. In analyzing workload basic wind speed is thoroughly treated according to SRPS U.C7.110, and respectively wind speed is treated according to Eurocode 1 for the location of Prahovo. Design of model for the effects of its own weight, a constant load and wind load was conducted according to the second order theory for pre-formed load combinations. The load combinations do not contain partial load safety factors. Design of chimney shaft segments are carried out for different ticknes by height of the pillar, for bearing capacity of cross-section, buckling due normal stress, buckling due tangential stress and buckling control is carried out due shear stress.

  6. Concurrent Design of Embedded Control Software

    NARCIS (Netherlands)

    Groothuis, M.A.; Frijns, Raymond; Voeten, Jeroen; Broenink, Johannes F.; Margaria, T.; Padberg, J.; Taentzer, G.; Levendovszky, T.; Lengyel, L.; Karsai, G.; Hardebolle, C.

    2009-01-01

    Embedded software design for mechatronic systems is becoming an increasingly time-consuming and error-prone task. In order to cope with the heterogeneity and complexity, a systematic model-driven design approach is needed, where several parts of the system can be designed concurrently. There is

  7. The effect of additional design parameters on the LQR based design of a control/structural system

    Science.gov (United States)

    Bainum, Peter M.; Xu, Jianke

    1990-01-01

    A multiobjective cost function that includes a form of the standard LQR regulator cost and its partial variation with respect to the additional design parameters is presented in connection with the design of an orbiting control/structural system. Simple models of uniform solid and tubular beams are demonstrated with two typical additional payload masses, i.e., symmetrically distributed and asymmetrically distributed, with respect to the center of the beam. By regarding the transient response of pitch angle and free-free beam deformations in the orbital plane, the optimal outer diameter of the beam and all feedback control can be determined by numerical analysis with this multicriterial approach. It is concluded that the multicriteria design approach should give better results from both the structural designer's and the control designer's standpoints.

  8. Self Tuning Techniques on PLC Background and Control Systems With Self Tuning Methods Design

    Directory of Open Access Journals (Sweden)

    Jiri Kocian

    2010-01-01

    Full Text Available Advanced Process Control techniques have become standard functions of distributed control systems. Self tuning methods belong to Advanced Process Control (APC techniques. APC techniques contain software packages for advanced control based on mathematical methods. APC tools are designed to increase the process capacity, yield and quality of products. Most of nowadays digital industry regulators and PLCs are provided with some kind of the self tuning constant algorithm. Practical part of the paper deals with design of the control systems which contain self tuning regulator. A control system with PID Self Tuner by Siemens and with visualization in WinCC is designed. There is a description of an implementation of the PID regulator as a function block which can be also used for extension control functions. Control systems for relay and moment self tuner with visualizations in WinCC are also designed.

  9. Robust decentralized power system controller design: Integrated approach

    Science.gov (United States)

    Veselý, Vojtech

    2017-09-01

    A unique approach to the design of gain scheduled controller (GSC) is presented. The proposed design procedure is based on the Bellman-Lyapunov equation, guaranteed cost and robust stability conditions using the parameter dependent quadratic stability approach. The obtained feasible design procedures for robust GSC design are in the form of BMI with guaranteed convex stability conditions. The obtained design results and their properties are illustrated in the simultaneously design of controllers for simple model (6-order) turbogenerator. The results of the obtained design procedure are a PI automatic voltage regulator (AVR) for synchronous generator, a PI governor controller and a power system stabilizer for excitation system.

  10. TWRS hydrogen mitigation portable standard hydrogen monitoring system platform design and fabrication engineering task plan

    International Nuclear Information System (INIS)

    Philipp, B.L.

    1997-01-01

    The primary function of portable gas monitoring is to quickly determine tank vapor space gas composition and gas release rate, and to detect gas release events. Characterization of the gas composition is needed for safety analysis. The lower flammability limit, as well as the peak burn temperature and pressure, are dependent upon the gas composition. If there is little or no knowledge about the gas composition, safety analysis utilize compositions that yield the worst case in a deflagration or detonation. This conservative approach to unknowns necessitates a significant increase in administrative and engineering costs. Knowledge of the true composition could lead to reductions in the assumptions and therefore contribute to a reduction in controls and work restrictions. Also, knowledge of the actual composition will be required information for the analysis that is needed to remove tanks from the Watch List. Similarly, the rate of generation and release of gases is required information for performing safety analysis, developing controls, designing equipment, and closing safety issues. To determine release rate, both the gas concentrations and the dome space ventilation rates (exhauster flow rate or passive dome/atmosphere exchange rate) are needed. Therefore, to quickly verify waste tank categorization or to provide additional characterization for tanks with installed gas monitoring, a temporary, portable standard hydrogen monitoring system is needed that can be used to measure gas compositions at both high and low sensitivities

  11. Differences in safety margins between nuclear and conventional design standards with regards to seismic hazard definition and design criteria

    International Nuclear Information System (INIS)

    Elgohary, M.; Saudy, A.; Orbovic, N.; Dejan, D.

    2006-01-01

    With the surging interest in new build nuclear all over the world and a permanent interest in earthquake resistance of nuclear plants, there is a need to quantify the safety margins in nuclear buildings design in comparison to conventional buildings in order to increase the public confidence in the safety of nuclear power plants. Nuclear (CAN3-N289 series) and conventional (NBCC 2005) seismic standards have different approaches regarding the design of civil structures. The origin of the differences lays in the safety philosophy behind the seismic nuclear and conventional standards. Conventional seismic codes contain the minimal requirement destined primarily to safeguard against major structural failure and loss of life. It doesn't limit damage to a certain acceptable degree or maintain function. Nuclear seismic code requires that structures, systems and components important to safety, withstand the effects of earthquakes. The requirement states that for equipment important to safety, both integrity and functionality should be ascertained. The seismic hazard is generally defined on the basis of the annual probability of exceedence (return period). There is a major difference on the return period and the confidence level for design earthquakes between the conventional and the nuclear seismic standards. The seismic design criteria of conventional structures are based on the use of Force Modification Factors to take into account the energy dissipation by incursion in non-elastic domain and the reserve of strength. The use of such factors to lower intentionally the seismic input is consistent with the safety philosophy of the conventional seismic standard which is the 'non collapse' rather than the integrity and/or the operability of the structures or components. Nuclear seismic standard requires that the structure remain in the elastic domain; energy dissipation by incursion in non-elastic domain is not allowed for design basis earthquake conditions. This is

  12. System design and control integration for advanced manufacturing

    CERN Document Server

    Li, Han-Xiong

    2014-01-01

    Most existing robust design books address design for static systems, or achieve robust design from experimental data via the Taguchi method. Little work considers model information for robust design particularly for the dynamic system. This book covers robust design for both static and dynamic systems using the nominal model information or the hybrid model/data information, and also integrates design with control under a large operating region. This design can handle strong nonlinearity and more uncertainties from model and parameters.

  13. Robust control design verification using the modular modeling system

    International Nuclear Information System (INIS)

    Edwards, R.M.; Ben-Abdennour, A.; Lee, K.Y.

    1991-01-01

    The Modular Modeling System (B ampersand W MMS) is being used as a design tool to verify robust controller designs for improving power plant performance while also providing fault-accommodating capabilities. These controllers are designed based on optimal control theory and are thus model based controllers which are targeted for implementation in a computer based digital control environment. The MMS is being successfully used to verify that the controllers are tolerant of uncertainties between the plant model employed in the controller and the actual plant; i.e., that they are robust. The two areas in which the MMS is being used for this purpose is in the design of (1) a reactor power controller with improved reactor temperature response, and (2) the design of a multiple input multiple output (MIMO) robust fault-accommodating controller for a deaerator level and pressure control problem

  14. Recent developments in the IAEA safety standards: design and operation of nuclear power plants

    International Nuclear Information System (INIS)

    Saito, Takehiko

    2004-01-01

    The IAEA has been publishing a wide variety of safety standards for nuclear and radiation related facilities and activities since 1978. In 1996, a more rigorously structured approach for the preparation and review of its safety standards was introduced. Currently, based on the approach, revision of most of the standards is in completion or near completion. The latest versions of the Safety Requirements for ''Design'' and ''Operation'' of nuclear power plants were respectively published in 2000. Currently, along with this revision of the Safety Requirements, many Safety Guides have been revised. In order to clarify the complicated revision procedure, an example of the entire revision process for a Safety Guide is provided. Through actual example of the revision process, enormous amount of work involved in the revision work is clearly indicated. The current status of all of the Safety Standards for Design and that for Operation of nuclear power plants are summarized. Summary of other IAEA safety standards currently revised and available related IAEA publications, together with information on the IAEA Web Site from where these documents can be downloaded, is also provided. The standards are reviewed to determine whether revision (or new issue) is necessary in five years following publication. The IAEA safety standards will continue to be updated through comprehensive and structured approach, collaboration of many experts of the world, and reflecting good practices of the world. The IAEA safety standards will serve to provide high level of safety assurance. (author)

  15. Mechanical Engineering Design Project report: Enabler control systems

    Science.gov (United States)

    Cullen, Christian; Delvecchio, Dave; Scarborough, Alan; Havics, Andrew A.

    1992-01-01

    The Controls Group was assigned the responsibility for designing the Enabler's control system. The requirement for the design was that the control system must provide a simple user interface to control the boom articulation joints, chassis articulation joints, and the wheel drive. The system required controlling hydraulic motors on the Enabler by implementing 8-bit microprocessor boards. In addition, feedback to evaluate positions and velocities must be interfaced to provide the operator with confirmation as well as control.

  16. Design validation of the ITER EC upper launcher according to codes and standards

    Energy Technology Data Exchange (ETDEWEB)

    Spaeh, Peter, E-mail: peter.spaeh@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Association KIT-EURATOM, P.O. Box 3640, D-76021 Karlsruhe (Germany); Aiello, Gaetano [Karlsruhe Institute of Technology, Institute for Applied Materials, Association KIT-EURATOM, P.O. Box 3640, D-76021 Karlsruhe (Germany); Gagliardi, Mario [Karlsruhe Institute of Technology, Association KIT-EURATOM, P.O. Box 3640, D-76021 Karlsruhe (Germany); F4E, Fusion for Energy, Joint Undertaking, Barcelona (Spain); Grossetti, Giovanni; Meier, Andreas; Scherer, Theo; Schreck, Sabine; Strauss, Dirk; Vaccaro, Alessandro [Karlsruhe Institute of Technology, Institute for Applied Materials, Association KIT-EURATOM, P.O. Box 3640, D-76021 Karlsruhe (Germany); Weinhorst, Bastian [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Association KIT-EURATOM, P.O. Box 3640, D-76021 Karlsruhe (Germany)

    2015-10-15

    Highlights: • A set of applicable codes and standards has been chosen for the ITER EC upper launcher. • For a particular component load combinations, failure modes and stress categorizations have been determined. • The design validation was performed in accordance with the “design by analysis”-approach of the ASME boiler and pressure vessel code section III. - Abstract: The ITER electron cyclotron (EC) upper launcher has passed the CDR (conceptual design review) in 2005 and the PDR (preliminary design review) in 2009 and is in its final design phase now. The final design will be elaborated by the European consortium ECHUL-CA with contributions from several research institutes in Germany, Italy, the Netherlands and Switzerland. Within this consortium KIT is responsible for the design of the structural components (the upper port plug, UPP) and also the design integration of the launcher. As the selection of applicable codes and standards was under discussion for the past decade, the conceptual and the preliminary design of the launcher structure were not elaborated in straight accordance with a particular code but with a variety of well-acknowledged engineering practices. For the final design it is compulsory to validate the design with respect to a typical engineering code in order to be compliant with the ITER quality and nuclear requirements and to get acceptance from the French regulator. This paper presents typical design validation of the closure plate, which is the vacuum and Tritium barrier and thus a safety relevant component of the upper port plug (UPP), performed with the ASME boiler and pressure vessel code. Rationales for choosing this code are given as well as a comparison between different design methods, like the “design by rule” and the “design by analysis” approach. Also the selections of proper load specifications and the identification of potential failure modes are covered. In addition to that stress categorizations, analyses

  17. Wiring design for the control of electromagnetic interference (EMI)

    Science.gov (United States)

    Kopasakis, George

    1995-01-01

    Wiring design is only one important aspect of EMI control. Other important areas for EMI are: circuit design, filtering, grounding, bonding, shielding, lighting, electrostatic discharge (ESD), transient suppression, and electromagnetic pulse (EMP). Topics covered include: wire magnetic field emissions at low frequencies; wire radiated magnetic field emissions at frequencies; wire design guidelines for EMI control; wire design guidelines for EMI control; high frequency emissions from cables; and pulse frequency spectra.

  18. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    OpenAIRE

    Sherman, Max H.

    2011-01-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outd...

  19. A Standardized Rubric for Evaluating Webquest Design: Reliability Analysis of ZUNAL Webquest Design Rubric

    Science.gov (United States)

    Unal, Zafer; Bodur, Yasar; Unal, Aslihan

    2012-01-01

    Current literature provides many examples of rubrics that are used to evaluate the quality of web-quest designs. However, reliability of these rubrics has not yet been researched. This is the first study to fully characterize and assess the reliability of a webquest evaluation rubric. The ZUNAL rubric was created to utilize the strengths of the…

  20. A Randomized Controlled Trial Comparing Telemedical and Standard Outpatient Monitoring of Diabetic Foot Ulcers

    DEFF Research Database (Denmark)

    Rasmussen, Benjamin S B; Froekjaer, Johnny; Bjerregaard, Mads R

    2015-01-01

    OBJECTIVE: The role of telemedical monitoring in diabetic foot ulcer care is still uncertain. Our aim was to compare telemedical and standard outpatient monitoring in the care of patients with diabetic foot ulcers in a randomized controlled trial. RESEARCH DESIGN AND METHODS: Of the 736 screened...... individuals with diabetic foot ulcers, 401 met the eligibility criteria and were randomized between October 2010 and November 2014. The per-protocol telemedical monitoring consisted of two consultations in the patient's own home and one consultation at the outpatient clinic. Standard practice consisted...... monitoring, a higher mortality throws into question the role of telemedicine in monitoring diabetic foot ulcers. Further studies are needed to investigate effects of telemedicine on mortality and other clinical outcomes and to identify patient subgroups that may have a poorer outcome through telemedical...

  1. FUZZY LOGIC CONTROLLED CATHODIC PROTECTION CIRCUIT DESIGN

    OpenAIRE

    AKÇAYOL, M. Ali

    2010-01-01

    In this study, output voltage of automatic transformer-rectifier (TR) unit of impressed current cathodic protection has been controlled by using fuzzy logic controller. To prevent corrosion, voltage between the protection metal and the auxiliary anode has to be controlled on a desired level. Because soil resistance in the environment changes with humidity and soil characteristics, TRs must control the output voltage between protection metal and auxiliary anode automatically. In this study, a ...

  2. Probabilistic Design and Tuning of LQ Control

    Czech Academy of Sciences Publication Activity Database

    Belda, Květoslav

    2009-01-01

    Roč. 19, č. 4 (2009), s. 355-368 ISSN 1230-2384 Institutional research plan: CEZ:AV0Z10750506 Keywords : adaptive control * closed-loop control * dynamic programming * state- space realization * tuneable filters Subject RIV: BC - Control Systems Theory http://library.utia.cas.cz/separaty/historie/belda-0332706.pdf

  3. 78 FR 40740 - Advisory Council on the Standards for Internal Control in the Federal Government

    Science.gov (United States)

    2013-07-08

    ... GOVERNMENT ACCOUNTABILITY OFFICE Advisory Council on the Standards for Internal Control in the... on the Green Book Advisory Council and the Standards for Internal Control in the Federal Government.... SUMMARY: The US Government Accountability Office (GAO) is preparing to revise the Standards for Internal...

  4. Study on Design of Control Module and Fuzzy Control System

    International Nuclear Information System (INIS)

    Lee, Chang Kyu; Sohn, Chang Ho; Kim, Jung Seon; Kim, Min Kyu

    2005-01-01

    Performance of control unit is improved by introduction of fuzzy control theory and compensation for input of control unit as FLC(Fuzzy Logic Controller). Here, FLC drives thermal control system by linguistic rule-base. Hence, In case of using compensative PID control unit, it doesn't need to revise or compensate for PID control unit. Consequently, this study shows proof that control system which implements H/W module and then uses fuzzy algorism in this system is stable and has reliable performance

  5. NASA-STD-3001, Space Flight Human-System Standard and the Human Integration Design Handbook

    Science.gov (United States)

    Whitmore, Mihriban; Boyer, Jennifer; Holubec, Keith

    2012-01-01

    NASA-STD-3001 Space Flight Human-System Standard Volume 1, Crew Health, Volume 2, Human Factors, Habitability and Environmental Health, and the Human Integration Design Handbook (HIDH) have replaced the Man-Systems Integration Standards (MSIS), NASA-STD-3000. For decades, NASA-STD-3000 was a significant contribution to human spaceflight programs and to human-systems integration. However, with research program and project results being realized, advances in technology, and the availability of new information in a variety of topic areas, the time had arrived to update this extensive suite of standards and design information. NASA-STD-3001, Volume 2 contains the Agency level standards from the human and environmental factors disciplines that ensure human spaceflight operations are performed safely, efficiently, and effectively. The HIDH is organized in the same sequence and serves as the companion document to NASA-STD-3001, Volume 2, providing a compendium of human spaceflight history and knowledge. The HIDH is intended to aid interpretation of NASA-STD-3001, Volume 2 standards and to provide guidance for requirement writers and vehicle and habitat designers. Keywords Human Factors, Standards, Environmental Factors, NASA

  6. Use of self-controlled designs in pharmacoepidemiology

    DEFF Research Database (Denmark)

    Hallas, J.; Pottegård, Anton

    2014-01-01

    Self-controlled observational study designs, such as the case-crossover design and the self-controlled case series, are reviewed, and their respective rationale, strengths and limitations are compared. Although no single design is generally superior to the others, they share the trait of being...... robust towards confounders that are stable over time. The self-controlled designs can be particularly useful when using secondary healthcare data for pharmacoepidemiological research and might be useful in screening for adverse drug effects. The main limitations of self-controlled designs...

  7. Comparison of the Standards applied to Instrumentation and Control Systems for Nuclear Power Stations in Korea and Russia

    Energy Technology Data Exchange (ETDEWEB)

    Park, Joo Hyun; Hwang, In Koo; Lee, Dong Young

    2005-04-15

    This report describes a comparison result of technical standards applied to instrumentation and control systems for nuclear power plants between in Korea and in Russia. Russia also has a state-run organization authorized to conduct approval, cancellation, and audit in use of nuclear facility or equipment. The Russian standards for nuclear instrumentation and control equipment are analogous with the Korean ones in the aspect of basic concepts and principles. However, there are some differences in document structure, design requirements, qualification test items, depth of contents between two standard systems. The biggest deviation exists in the standard documents for seismic qualification and electromagnetic interference qualification. Korean seismic qualification standard utilizing US approach, defines testing and qualification methods specifically and clearly. Russian standards however provide only conceptual definitions and requirements in the seismic related aspects. Therefore, it is conceived that any equipment or system qualified seismically in accordance with Korean standards should additionally provide technical evidence that it is satisfactory with Russian standards as well. In electromagnetic interference qualification, because Russian standard requires more testing items than the current Korean standard, the additional qualification tests are necessary to meet the Russian requirements. However, these additional test items are based on IEC(International Electrotechnical Commission), therefore it is not a problem to perform those tests in a Korean testing facility.

  8. Comparison of the Standards applied to Instrumentation and Control Systems for Nuclear Power Stations in Korea and Russia

    International Nuclear Information System (INIS)

    Park, Joo Hyun; Hwang, In Koo; Lee, Dong Young

    2005-04-01

    This report describes a comparison result of technical standards applied to instrumentation and control systems for nuclear power plants between in Korea and in Russia. Russia also has a state-run organization authorized to conduct approval, cancellation, and audit in use of nuclear facility or equipment. The Russian standards for nuclear instrumentation and control equipment are analogous with the Korean ones in the aspect of basic concepts and principles. However, there are some differences in document structure, design requirements, qualification test items, depth of contents between two standard systems. The biggest deviation exists in the standard documents for seismic qualification and electromagnetic interference qualification. Korean seismic qualification standard utilizing US approach, defines testing and qualification methods specifically and clearly. Russian standards however provide only conceptual definitions and requirements in the seismic related aspects. Therefore, it is conceived that any equipment or system qualified seismically in accordance with Korean standards should additionally provide technical evidence that it is satisfactory with Russian standards as well. In electromagnetic interference qualification, because Russian standard requires more testing items than the current Korean standard, the additional qualification tests are necessary to meet the Russian requirements. However, these additional test items are based on IEC(International Electrotechnical Commission), therefore it is not a problem to perform those tests in a Korean testing facility

  9. Contribution of thermal–hydraulic validation tests to the standard design approval of SMART

    Directory of Open Access Journals (Sweden)

    Hyun-Sik Park

    2017-10-01

    Full Text Available Many thermal–hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test facility to evaluate the safety injection performance and to validate the thermal–hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop facility to construct a database from the 5 × 5 rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

  10. Standardization Efforts for Mechanical Testing and Design of Advanced Ceramic Materials and Components

    Science.gov (United States)

    Salem, Jonathan A.; Jenkins, Michael G.

    2003-01-01

    Advanced aerospace systems occasionally require the use of very brittle materials such as sapphire and ultra-high temperature ceramics. Although great progress has been made in the development of methods and standards for machining, testing and design of component from these materials, additional development and dissemination of standard practices is needed. ASTM Committee C28 on Advanced Ceramics and ISO TC 206 have taken a lead role in the standardization of testing for ceramics, and recent efforts and needs in standards development by Committee C28 on Advanced Ceramics will be summarized. In some cases, the engineers, etc. involved are unaware of the latest developments, and traditional approaches applicable to other material systems are applied. Two examples of flight hardware failures that might have been prevented via education and standardization will be presented.

  11. A control center design revisited: learning from users’ appropriation

    DEFF Research Database (Denmark)

    Souza da Conceição, Carolina; Cordeiro, Cláudia

    2014-01-01

    This paper aims to present the lessons learned during a control center design project by revisiting another control center from the same company designed two and a half years before by the same project team. In light of the experience with the first project and its analysis, the designers and res...

  12. Report on design rules of μ-tools for standard insert

    DEFF Research Database (Denmark)

    Tosello, Guido; Esmoris, Josa Ignacio; Quadroni, A.

    2011-01-01

    Tooling is one of the critical stages of the process chain for polymer micro products manufacture and in particular for the COTECH process chain. Therefore, within the scope of SP2 “Tooling”, the WP 2.2 “New tool-making solutions for μ-IM and HE” is designed to investigate, develop and standardize......-effectively, especially for micro injection moulding. This particular deliverable has the objective to present the design rules for high performance μ-tools and inserts manufacture based on the new standard manufacturing process chains established during the WP 2.2 work. In particular, the achievable features, surfaces...

  13. SSTL I/O Standard Based Green Communication Using Fibonacci Generator Design on Ultra Scale FPGA

    DEFF Research Database (Denmark)

    Nagah, Sumi; Kaur, Ravinder; Pandey, Bishwajeet

    2015-01-01

    In this paper six different available classes of Stub-Series Terminated Logic (SSTL) Input/output standard is used for the design of Green Fibonacci generator on 40nm FGPA. That green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make energy efficient communic......In this paper six different available classes of Stub-Series Terminated Logic (SSTL) Input/output standard is used for the design of Green Fibonacci generator on 40nm FGPA. That green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make energy efficient...

  14. Experimental Validation of an Integrated Controls-Structures Design Methodology

    Science.gov (United States)

    Maghami, Peiman G.; Gupta, Sandeep; Elliot, Kenny B.; Walz, Joseph E.

    1996-01-01

    The first experimental validation of an integrated controls-structures design methodology for a class of large order, flexible space structures is described. Integrated redesign of the controls-structures-interaction evolutionary model, a laboratory testbed at NASA Langley, was described earlier. The redesigned structure was fabricated, assembled in the laboratory, and experimentally tested against the original structure. Experimental results indicate that the structure redesigned using the integrated design methodology requires significantly less average control power than the nominal structure with control-optimized designs, while maintaining the required line-of-sight pointing performance. Thus, the superiority of the integrated design methodology over the conventional design approach is experimentally demonstrated. Furthermore, amenability of the integrated design structure to other control strategies is evaluated, both analytically and experimentally. Using Linear-Quadratic-Guassian optimal dissipative controllers, it is observed that the redesigned structure leads to significantly improved performance with alternate controllers as well.

  15. After the Gold Rush: Questioning the "Gold Standard" and Reappraising the Status of Experiment and Randomized Controlled Trials in Education

    Science.gov (United States)

    Thomas, Gary

    2016-01-01

    The past few years have seen a resurgence of faith in experimentation in education inquiry, and particularly in randomized controlled trials (RCTs). Proponents of such research have succeeded in bringing into common parlance the term "gold standard," which suggests that research emerging from any other design frame fails to achieve the…

  16. Use of the Human Centered Design concept when designing ergonomic NPP control rooms

    International Nuclear Information System (INIS)

    Skrehot, Petr A.; Houser, Frantisek; Riha, Radek; Tuma, Zdenek

    2015-01-01

    Human-Centered Design is a concept aimed at reconciling human needs on the one hand and limitations posed by the design disposition of the room being designed on the other hand. This paper describes the main aspects of application of the Human-Centered Design concept to the design of nuclear power plant control rooms. (orig.)

  17. How the new optoelectronic design automation industry is taking advantage of preexisting EDA standards

    Science.gov (United States)

    Nesmith, Kevin A.; Carver, Susan

    2014-05-01

    With the advancements in design processes down to the sub 7nm levels, the Electronic Design Automation industry appears to be coming to an end of advancements, as the size of the silicon atom becomes the limiting factor. Or is it? The commercial viability of mass-producing silicon photonics is bringing about the Optoelectronic Design Automation (OEDA) industry. With the science of photonics in its infancy, adding these circuits to ever-increasing complex electronic designs, will allow for new generations of advancements. Learning from the past 50 years of the EDA industry's mistakes and missed opportunities, the photonics industry is starting with electronic standards and extending them to become photonically aware. Adapting the use of pre-existing standards into this relatively new industry will allow for easier integration into the present infrastructure and faster time to market.

  18. Improved fuzzy PID controller design using predictive functional control structure.

    Science.gov (United States)

    Wang, Yuzhong; Jin, Qibing; Zhang, Ridong

    2017-11-01

    In conventional PID scheme, the ensemble control performance may be unsatisfactory due to limited degrees of freedom under various kinds of uncertainty. To overcome this disadvantage, a novel PID control method that inherits the advantages of fuzzy PID control and the predictive functional control (PFC) is presented and further verified on the temperature model of a coke furnace. Based on the framework of PFC, the prediction of the future process behavior is first obtained using the current process input signal. Then, the fuzzy PID control based on the multi-step prediction is introduced to acquire the optimal control law. Finally, the case study on a temperature model of a coke furnace shows the effectiveness of the fuzzy PID control scheme when compared with conventional PID control and fuzzy self-adaptive PID control. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  19. Model based design of electronic throttle control

    Science.gov (United States)

    Cherian, Fenin; Ranjan, Ashish; Bhowmick, Pathikrit; Rammohan, A.

    2017-11-01

    With the advent of torque based Engine Management Systems, the precise control and robust performance of the throttle body becomes a key factor in the overall performance of the vehicle. Electronic Throttle Control provides benefits such as improved air-fuel ratio for improving the vehicle performance and lower exhausts emissions to meet the stringent emission norms. Modern vehicles facilitate various features such as Cruise Control, Traction Control, Electronic Stability Program and Pre-crash systems. These systems require control over engine power without driver intervention, which is not possible with conventional mechanical throttle system. Thus these systems are integrated to function with the electronic throttle control. However, due to inherent non-linearities in the throttle body, the control becomes a difficult task. In order to eliminate the influence of this hysteresis at the initial operation of the butterfly valve, a control to compensate the shortage must be added to the duty required for starting throttle operation when the initial operation is detected. Therefore, a lot of work is being done in this field to incorporate the various nonlinearities to achieve robust control. In our present work, the ETB was tested to verify the working of the system. Calibration of the TPS sensors was carried out in order to acquire accurate throttle opening angle. The response of the calibrated system was then plotted against a step input signal. A linear model of the ETB was prepared using Simulink and its response was compared with the experimental data to find out the initial deviation of the model from the actual system. To reduce this deviation, non-linearities from existing literature were introduced to the system and a response analysis was performed to check the deviation from the actual system. Based on this investigation, an introduction of a new nonlinearity parameter can be used in future to reduce the deviation further making the control of the ETB more

  20. A basis for standardized seismic design (SSD) for nuclear power plants/critical facilities

    International Nuclear Information System (INIS)

    O'Hara, T.F.; Jacobson, J.P.; Bellini, F.X.

    1991-01-01

    US Nuclear Power Plants (NPP's) are designed, engineered and constructed to stringent standards. Their seismic adequacy is assured by compliance with regulatory standards and demonstrated by both probabilistic risk assessments (PRAs) and seismic margin studies. However, present seismic siting criteria requires improvement. Proposed changes to siting criteria discussed here will provide a predictable licensing process and a stable regulatory environment. Two recent state-of-the-art studies evaluate the seismic design for all eastern US (EUS) NPP'S: a Lawrence Livermore National Labs study (LLNL, 1989) funded by the NRC and similar research by the Electric Power Research Institute (EPRI, 1989) supported by the utilities. Both confirm that Appendix A 10CFR Part 100 has not provided consistent seismic design levels for all sites. Standardized Seismic Design (SSD) uses a probabilistic framework to accommodate alternative deterministic interpretations. It uses seismic hazard input from EPRI or LLNL to produce consistent bases for future seismic design. SSD combines deterministic and probabilistic insights to provide a comprehensive approach for determining a future site's acceptable seismic design basis

  1. Design of virtual three-dimensional instruments for sound control

    Science.gov (United States)

    Mulder, Axel Gezienus Elith

    An environment for designing virtual instruments with 3D geometry has been prototyped and applied to real-time sound control and design. It enables a sound artist, musical performer or composer to design an instrument according to preferred or required gestural and musical constraints instead of constraints based only on physical laws as they apply to an instrument with a particular geometry. Sounds can be created, edited or performed in real-time by changing parameters like position, orientation and shape of a virtual 3D input device. The virtual instrument can only be perceived through a visualization and acoustic representation, or sonification, of the control surface. No haptic representation is available. This environment was implemented using CyberGloves, Polhemus sensors, an SGI Onyx and by extending a real- time, visual programming language called Max/FTS, which was originally designed for sound synthesis. The extension involves software objects that interface the sensors and software objects that compute human movement and virtual object features. Two pilot studies have been performed, involving virtual input devices with the behaviours of a rubber balloon and a rubber sheet for the control of sound spatialization and timbre parameters. Both manipulation and sonification methods affect the naturalness of the interaction. Informal evaluation showed that a sonification inspired by the physical world appears natural and effective. More research is required for a natural sonification of virtual input device features such as shape, taking into account possible co- articulation of these features. While both hands can be used for manipulation, left-hand-only interaction with a virtual instrument may be a useful replacement for and extension of the standard keyboard modulation wheel. More research is needed to identify and apply manipulation pragmatics and movement features, and to investigate how they are co-articulated, in the mapping of virtual object

  2. 76 FR 62074 - Proposed Revision of Performance Standards for State Medicaid Fraud Control Units

    Science.gov (United States)

    2011-10-06

    ...] Proposed Revision of Performance Standards for State Medicaid Fraud Control Units AGENCY: Office of... Control Units (MFCUs or Units). This proposal would replace and supersede standards published on September..., including 42 CFR Sec. 455.21, ``Cooperation with State Medicaid fraud control units,'' and 42 CFR 455.23...

  3. Project Design Concept for Monitoring and Control System

    International Nuclear Information System (INIS)

    MCGREW, D.L.

    2000-01-01

    This Project Design Concept represents operational requirements established for use in design the tank farm Monitoring and Control System. These upgrades are included within the scope of Project W-314, Tank Farm Restoration and Safe Operations

  4. Anatomy of a control system; a system designer's view

    International Nuclear Information System (INIS)

    Magyary, S.

    1993-05-01

    The Advanced Light Source (ALS) control system is quite unconventional in its design and implementation. This paper discusses the system design considerations, the actual implementation, hardware and software costs, and the measured performance across all layers of the system

  5. Bifurcation-free design method of pulse energy converter controllers

    Energy Technology Data Exchange (ETDEWEB)

    Kolokolov, Yury [Institute of Applied Mathematics, Informatics and Control, Yugra State University, 16 Chekhova str., Khanty-Mansiysk 628012 (Russian Federation); Ustinov, Pavel [Department of Design and Technology of Electronic and Computer Systems, Orel State Technical University, 29 Naugorskoye Shosse, Orel 302020 (Russian Federation); CReSTIC, Universite de Reims Champagne-Ardenne, Moulin de la Housse, BP 1039, Reims Cedex 2, 51687 (France)], E-mail: pavel-ustinov@yandex.ru; Essounbouli, Najib; Hamzaoui, Abdelaziz [CReSTIC, Universite de Reims Champagne-Ardenne, Moulin de la Housse, BP 1039, Reims Cedex 2, 51687 (France)

    2009-12-15

    In this paper, a design method of pulse energy converter (PEC) controllers is proposed. This method develops a classical frequency domain design, based on the small signal modeling, by means of an addition of a nonlinear dynamics analysis stage. The main idea of the proposed method consists in fact that the PEC controller, designed with an application of the small signal modeling, is tuned after with taking into the consideration an essentially nonlinear nature of the PEC that makes it possible to avoid bifurcation phenomena in the PEC dynamics at the design stage (bifurcation-free design). Also application of the proposed method allows an improvement of the designed controller performance. The application of this bifurcation-free design method is demonstrated on an example of the controller design of direct current-direct current (DC-DC) buck converter with an input electromagnetic interference filter.

  6. Bifurcation-free design method of pulse energy converter controllers

    International Nuclear Information System (INIS)

    Kolokolov, Yury; Ustinov, Pavel; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2009-01-01

    In this paper, a design method of pulse energy converter (PEC) controllers is proposed. This method develops a classical frequency domain design, based on the small signal modeling, by means of an addition of a nonlinear dynamics analysis stage. The main idea of the proposed method consists in fact that the PEC controller, designed with an application of the small signal modeling, is tuned after with taking into the consideration an essentially nonlinear nature of the PEC that makes it possible to avoid bifurcation phenomena in the PEC dynamics at the design stage (bifurcation-free design). Also application of the proposed method allows an improvement of the designed controller performance. The application of this bifurcation-free design method is demonstrated on an example of the controller design of direct current-direct current (DC-DC) buck converter with an input electromagnetic interference filter.

  7. Experimental design and reporting standards for metabolomics studies of mammalian cell lines.

    Science.gov (United States)

    Hayton, Sarah; Maker, Garth L; Mullaney, Ian; Trengove, Robert D

    2017-12-01

    Metabolomics is an analytical technique that investigates the small biochemical molecules present within a biological sample isolated from a plant, animal, or cultured cells. It can be an extremely powerful tool in elucidating the specific metabolic changes within a biological system in response to an environmental challenge such as disease, infection, drugs, or toxins. A historically difficult step in the metabolomics pipeline is in data interpretation to a meaningful biological context, for such high-variability biological samples and in untargeted metabolomics studies that are hypothesis-generating by design. One way to achieve stronger biological context of metabolomic data is via the use of cultured cell models, particularly for mammalian biological systems. The benefits of in vitro metabolomics include a much greater control of external variables and no ethical concerns. The current concerns are with inconsistencies in experimental procedures and level of reporting standards between different studies. This review discusses some of these discrepancies between recent studies, such as metabolite extraction and data normalisation. The aim of this review is to highlight the importance of a standardised experimental approach to any cultured cell metabolomics study and suggests an example procedure fully inclusive of information that should be disclosed in regard to the cell type/s used and their culture conditions. Metabolomics of cultured cells has the potential to uncover previously unknown information about cell biology, functions and response mechanisms, and so the accurate biological interpretation of the data produced and its ability to be compared to other studies should be considered vitally important.

  8. Change Controlling: Suggestions for the design of Change Controlling

    OpenAIRE

    Rehn, Roland

    2013-01-01

    Exploring the correlation of change controlling usage and success of change projects. Therefore this thesis investigates the characteristics of change controlling and their correlation with a successful measurement process. Furthermore, it aims to provide a proposal for a change controlling framework.

  9. BACnet the global standard for building automation and control networks

    CERN Document Server

    Newman, Michael

    2013-01-01

    BACnet is a data communication protocol for building automation and control systems, developed within ASHRAE in cooperation with ANSI, CEN, and the ISO. This new book, by the original chairman of the BACnet committee, explains how the BACnet protocol manages all basic building functions in a seamless, integrated way. The book explains how BACnet works with all major control systems-including those provided by Honeywell, Siemens, and Johnson Controls, among many others-to manage everything from heating to ventilation to lighting to fire control and alarm systems. BACnet is used today throughout the world for commercial and institutional buildings with complex mechanical and electrical systems. Contractors, architects, building systems engineers, and facilities managers must all be cognizant of BACnet and its applications. With a real "seat at the table," you'll find it easier to understand the intent and use of each of the data sharing techniques, controller requirements, and opportunities for interoperability...

  10. Motion control solution for new PLC-based standard development platform for VLT instrument control systems

    Science.gov (United States)

    Popovic, D.; Brast, R.; Di Lieto, N.; Kiekebusch, M.; Knudstrup, J.; Lucuix, C.

    2014-07-01

    More than a decade ago, due to obsolescence issues, ESO initiated the design and implementation of a custom-made CANbus based motion controller (CAN-RMC) to provide, together with a tailor-made software library (motor library), the motion control capabilities for the VME platform needed for the second generation VLT/VLTI instruments. The CAN-RMC controller has been successfully used in a number of VLT instruments but it has high production costs compared to the commercial off-the-shelf (COTS) industrial solutions available on the market today. In the scope of the selection of a new PLC-based platform for the VLT instrument control systems, ESO has evaluated motion control solutions from the company Beckhoff. This paper presents the investigation, implementation and testing of the PLC/TwinCAT/EtherCAT motion controllers for DC and stepper motors and their adaptation and integration into the VLT instrumentation framework. It reports functional and performance test results for the most typical use cases of astronomical instruments like initialization sequences, tracking, switch position detections, backslash compensation, brake handling, etc. In addition, it gives an overview of the main features of TwinCAT NC/PTP, PLCopen MC, EtherCAT motion control terminals and the engineering tools like TwinCAT Scope that are integrated into the development environment and simplify software development, testing and commissioning of motorized instrument functions.

  11. R and D issues in structural design standard for commercialized fast reactor components

    International Nuclear Information System (INIS)

    Shibamoto, Hiroshi; Tanaka, Yoshihiko; Inoue, Kazuhiko; Kasahara, Naoto; Morishita, Masaki

    2003-01-01

    Conceptual design studies of Japanese commercialized fast reactors (FRs) are carried out. With careful considerations on safety, economical improvement for practical use of these plants are aimed for, and the design of them is rationalized with adopting simple and innovative components, etc.. To certify the design concepts and validate structural integrity, research and development of Fast Reactor Structural Design Standard (FDS) for commercialized fast reactor components is now under way. Based on general characteristics of FRs and design needs of commercialized FRs, main subjects of R and D were identified. As for failure criteria, development for rational treatment of creep design region is dealt with. Ratcheting fatigue tests are conducted for the purpose of confirming the limit that ratcheting strain has negligible effects on structure strength. Besides, objecting to contribute to design rationalization through prediction of elasto-plastic and creep behaviors with high-precision, efforts to establish inelastic analysis methodologies for design are carried out. A guideline on inelastic analysis for design related to FDS, is prepared. This guideline is applied to evaluate the structural integrity of critical parts of components in conceptual design of commercialized FRs. Furthermore, aimed for mitigating thermal loads, a guideline on thermal loads modeling for design related to FDS is under developing. (author)

  12. IMS Learning Design: State of the art and research hot topics on eLearning standardization

    OpenAIRE

    Burgos, Daniel

    2006-01-01

    Burgos, D. (2006). IMS Learning Design: State of the art and research hot topics on eLearning standardization. Presentation at the 8th International Simposio of Educational Computer Science. October, 24-27, 2006, León, Spain: IEEE Technical Committee on Learning Technology.

  13. Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

    Science.gov (United States)

    Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

    2015-01-01

    The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

  14. 76 FR 76048 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

    Science.gov (United States)

    2011-12-06

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 81 [EPA-HQ-OAR-2009-0443; FRL-9492-3] RIN 2060-AR17 Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards Correction In rule document 2011-29460 appearing on pages 72097-72120 in the issues of Tuesday, November 22, 2011...

  15. Standard Error of Linear Observed-Score Equating for the NEAT Design with Nonnormally Distributed Data

    Science.gov (United States)

    Zu, Jiyun; Yuan, Ke-Hai

    2012-01-01

    In the nonequivalent groups with anchor test (NEAT) design, the standard error of linear observed-score equating is commonly estimated by an estimator derived assuming multivariate normality. However, real data are seldom normally distributed, causing this normal estimator to be inconsistent. A general estimator, which does not rely on the…

  16. 75 FR 29933 - Energy Efficiency and Sustainable Design Standards for New Federal Buildings

    Science.gov (United States)

    2010-05-28

    ... Price Indexes). If a new or replacement Federal building does not fit into one of these two categories... Efficiency and Sustainable Design Standards for New Federal Buildings AGENCY: Office of Energy Efficiency and... construction of new Federal buildings and major renovations of Federal buildings. This NOPR specifically...

  17. Quality Matters: New Roles for Librarians Using Standards for Online Course Design

    Science.gov (United States)

    Newby, Jill; Eagleson, Laurie; Pfander, Jeanne

    2014-01-01

    Quality Matters™ (QM) is a nationally recognized organization that certifies online courses for effective design, using an evidenced-based set of standards and a structured peer review process. In this paper, the authors demonstrate how academic librarians involved with online courses can adopt Quality Matters to build capacity for designing…

  18. 10 CFR 51.55 - Environmental report-standard design certification.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Environmental report-standard design certification. 51.55 Section 51.55 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) ENVIRONMENTAL PROTECTION REGULATIONS FOR DOMESTIC LICENSING AND RELATED REGULATORY FUNCTIONS National Environmental Policy Act-Regulations...

  19. 75 FR 34657 - Energy Efficiency and Sustainable Design Standards for New Federal Buildings

    Science.gov (United States)

    2010-06-18

    ... Efficiency and Sustainable Design Standards for New Federal Buildings AGENCY: Office of Energy Efficiency and... Federal buildings. This notice extends the comment period to August 12, 2010. DATES: DOE will hold a.... Department of Energy, Forrestal Building, Room 8E-089, 1000 Independence Avenue, SW., Washington, DC 20585...

  20. Unified Controller Design for Intelligent Manufacturing Automation

    National Research Council Canada - National Science Library

    Kosut, Robert

    1997-01-01

    .... The demonstration system selected was rapid thermal processing (RTP) of semiconductor wafers. This novel approach in integrated circuit manufacturing demands fast tracking control laws that achieve near uniform spatial temperature distributions...

  1. The Design and Control of Smart Structures

    National Research Council Canada - National Science Library

    Brockett, Roger

    2004-01-01

    ... optical switch based on the control of a fluid interface. More than 60 students at undergraduate, graduate and postdoctoral levels were supported under this project and over 160 papers have appeared acknowledging support from the grant.

  2. Fighter aircraft flight control technology design requirements

    Science.gov (United States)

    Nelson, W. E., Jr.

    1984-01-01

    The evolution of fighter aircraft flight control technology is briefly surveyed. Systems engineering, battle damage considerations for adaptive flutter suppression, in-flight simulation, and artificial intelligence are briefly discussed.

  3. Model based design introduction: modeling game controllers to microprocessor architectures

    Science.gov (United States)

    Jungwirth, Patrick; Badawy, Abdel-Hameed

    2017-04-01

    We present an introduction to model based design. Model based design is a visual representation, generally a block diagram, to model and incrementally develop a complex system. Model based design is a commonly used design methodology for digital signal processing, control systems, and embedded systems. Model based design's philosophy is: to solve a problem - a step at a time. The approach can be compared to a series of steps to converge to a solution. A block diagram simulation tool allows a design to be simulated with real world measurement data. For example, if an analog control system is being upgraded to a digital control system, the analog sensor input signals can be recorded. The digital control algorithm can be simulated with the real world sensor data. The output from the simulated digital control system can then be compared to the old analog based control system. Model based design can compared to Agile software develop. The Agile software development goal is to develop working software in incremental steps. Progress is measured in completed and tested code units. Progress is measured in model based design by completed and tested blocks. We present a concept for a video game controller and then use model based design to iterate the design towards a working system. We will also describe a model based design effort to develop an OS Friendly Microprocessor Architecture based on the RISC-V.

  4. Design and Implementation of a Prototype with a Standardized Interface for Transducers in Ambient Assisted Living

    Directory of Open Access Journals (Sweden)

    Enrique Dorronzoro

    2015-01-01

    Full Text Available Solutions in the field of Ambient Assisted Living (AAL do not generally use standards to implement a communication interface between sensors and actuators. This makes these applications isolated solutions because it is so difficult to integrate them into new or existing systems. The objective of this research was to design and implement a prototype with a standardized interface for sensors and actuators to facilitate the integration of different solutions in the field of AAL. Our work is based on the roadmap defined by AALIANCE, using motes with TinyOS telosb, 6LoWPAN, sensors, and the IEEE 21451 standard protocol. This prototype allows one to upgrade sensors to a smart status for easy integration with new applications and already existing ones. The prototype has been evaluated for autonomy and performance. As a use case, the prototype has been tested in a serious game previously designed for people with mobility problems, and its advantages and disadvantages have been analysed.

  5. Testing keywords internationally to define and apply undergraduate assessment standards in art and design

    Directory of Open Access Journals (Sweden)

    Robert Harland

    2015-07-01

    Full Text Available What language should be featured in assessment standards for international students? Have universities adjusted their assessment methods sufficiently to match the increased demand for studying abroad? How might art and design benefit from a more stable definition of standards? These are some questions this paper seeks to address by reporting the results of recent pedagogic research at the School of the Arts, Loughborough University, in the United Kingdom. Language use is at the heart of this issue, yet it is generally overlooked as an essential tool that links assessment, feedback and action planning for international students. The paper reveals existing and new data that builds on research since 2009, aimed at improving students’ assessment literacy. Recommendations are offered to stimulate local and global discussion about keyword use for defining undergraduate assessment standards in art and design.

  6. Towards product design automation based on parameterized standard model with diversiform knowledge

    Science.gov (United States)

    Liu, Wei; Zhang, Xiaobing

    2017-04-01

    Product standardization based on CAD software is an effective way to improve design efficiency. In the past, research and development on standardization mainly focused on the level of component, and the standardization of the entire product as a whole is rarely taken into consideration. In this paper, the size and structure of 3D product models are both driven by the Excel datasheets, based on which a parameterized model library is therefore established. Diversiform knowledge including associated parameters and default properties are embedded into the templates in advance to simplify their reuse. Through the simple operation, we can obtain the correct product with the finished 3D models including single parts or complex assemblies. Two examples are illustrated later to invalid the idea, which will greatly improve the design efficiency.

  7. Model reduction in integrated controls-structures design

    Science.gov (United States)

    Maghami, Peiman G.

    1993-01-01

    It is the objective of this paper to present a model reduction technique developed for the integrated controls-structures design of flexible structures. Integrated controls-structures design problems are typically posed as nonlinear mathematical programming problems, where the design variables consist of both structural and control parameters. In the solution process, both structural and control design variables are constantly changing; therefore, the dynamic characteristics of the structure are also changing. This presents a problem in obtaining a reduced-order model for active control design and analysis which will be valid for all design points within the design space. In other words, the frequency and number of the significant modes of the structure (modes that should be included) may vary considerably throughout the design process. This is also true as the locations and/or masses of the sensors and actuators change. Moreover, since the number of design evaluations in the integrated design process could easily run into thousands, any feasible order-reduction method should not require model reduction analysis at every design iteration. In this paper a novel and efficient technique for model reduction in the integrated controls-structures design process, which addresses these issues, is presented.

  8. Production Quality Control Of Microfluidic Chip Designs

    DEFF Research Database (Denmark)

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido

    2012-01-01

    process chain, test geometries were designed and produced on the side of the functional features. The so called “Finger Print” of the lithography and molding processes was qualitatively and quantitatively evaluated through scanning electron microscopy and atomic force microscopy respectively. The entire...

  9. Active noise control in fuselage design

    NARCIS (Netherlands)

    Krakers, L.A.; Tooren, M.J.L. van; Beukers, A.; Berkhof, A.P.; Goeje, M.P. de

    2003-01-01

    To achieve comfortable noise levels inside the passenger cabin, sound damping measures have to be taken to improve the sound insulation properties of the bare airframe. Usually the sound insulation requirements of a passenger cabin are met after the mechanical design of the fuselage structure is

  10. A holistic strategy for quality and safety control of traditional Chinese medicines by the "iVarious" standard system.

    Science.gov (United States)

    Chen, Anzhen; Sun, Lei; Yuan, Hang; Wu, Aiying; Lu, Jingguang; Ma, Shuangcheng

    2017-10-01

    An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs). However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named "iVarious", was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the "iVarious" system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of "iVarious" integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  11. A holistic strategy for quality and safety control of traditional Chinese medicines by the “iVarious” standard system

    Directory of Open Access Journals (Sweden)

    Anzhen Chen

    2017-10-01

    Full Text Available An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs. However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named “iVarious”, was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the “iVarious” system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of “iVarious” integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  12. Design and Construction of a Computer Controlled Clothes Washing ...

    African Journals Online (AJOL)

    controlled. In the design, the mechanical timer's function were replaced by a software driven emulator which then controls components of the machine to carry out specific tasks at pre-determined intervals. The software was written using Microsoft

  13. Maintenance standards, care and control of the radiation protection material

    International Nuclear Information System (INIS)

    Brasesco, L.

    2004-01-01

    The present protocol in Radiology, Tomography, surgical block and intensive care unit in the Britanic Hospital from Uruguay.Between their topics find care procedures in protective clothes, periodic and control methods, material record,and staff assigned

  14. Increasing software testability with standard access and control interfaces

    Science.gov (United States)

    Nikora, Allen P; Some, Raphael R.; Tamir, Yuval

    2003-01-01

    We describe an approach to improving the testability of complex software systems with software constructs modeled after the hardware JTAG bus, used to provide visibility and controlability in testing digital circuits.

  15. Standard concerning the design of nuclear power stations in earthquake-prone districts

    International Nuclear Information System (INIS)

    Kirillov, A.P.; Anbriashivili, Y.K.; Suvilova, A.V.

    1980-01-01

    The measures of security assurance against the effect of radioactive contamination has become more and more complex due to the construction of nuclear power stations of diverse types. The aseismatic measures for the nuclear power stations built in the districts where earthquakes of different intensity occur are important problems. All main machinery and equipments and emergency systems in power stations must be protected from earthquakes, and this makes the solution of problems difficult. At present in USSR, the provisional standard concerning the design of atomic energy facilities built in earthquake-prone districts is completed. The basic philosophy of the standard is to decide the general requirements as the conditions for the design of nuclear power stations built in earthquake-prone districts. The lowest earthquake activity in the construction districts is considered as magnitude 4, and in the districts where earthquake activity is magnitude 9 or more, the construction of nuclear power stations is prohibited. Two levels of earthquake action are specified for the design: design earthquake and the largest design earthquake. The construction sites of nuclear power stations must be 15 to 150 km distant from the potential sources of earthquakes. Nuclear power stations are regarded as the aseismatically guaranteed type when the safety of reactors is secured under the application of the standard. The buildings and installations are classified into three classes regarding the aseismatic properties. (Kako, I.)

  16. The Synthetic Biology Open Language (SBOL) provides a community standard for communicating designs in synthetic biology.

    Science.gov (United States)

    Galdzicki, Michal; Clancy, Kevin P; Oberortner, Ernst; Pocock, Matthew; Quinn, Jacqueline Y; Rodriguez, Cesar A; Roehner, Nicholas; Wilson, Mandy L; Adam, Laura; Anderson, J Christopher; Bartley, Bryan A; Beal, Jacob; Chandran, Deepak; Chen, Joanna; Densmore, Douglas; Endy, Drew; Grünberg, Raik; Hallinan, Jennifer; Hillson, Nathan J; Johnson, Jeffrey D; Kuchinsky, Allan; Lux, Matthew; Misirli, Goksel; Peccoud, Jean; Plahar, Hector A; Sirin, Evren; Stan, Guy-Bart; Villalobos, Alan; Wipat, Anil; Gennari, John H; Myers, Chris J; Sauro, Herbert M

    2014-06-01

    The re-use of previously validated designs is critical to the evolution of synthetic biology from a research discipline to an engineering practice. Here we describe the Synthetic Biology Open Language (SBOL), a proposed data standard for exchanging designs within the synthetic biology community. SBOL represents synthetic biology designs in a community-driven, formalized format for exchange between software tools, research groups and commercial service providers. The SBOL Developers Group has implemented SBOL as an XML/RDF serialization and provides software libraries and specification documentation to help developers implement SBOL in their own software. We describe early successes, including a demonstration of the utility of SBOL for information exchange between several different software tools and repositories from both academic and industrial partners. As a community-driven standard, SBOL will be updated as synthetic biology evolves to provide specific capabilities for different aspects of the synthetic biology workflow.

  17. Integration of Design and Control through Model Analysis

    DEFF Research Database (Denmark)

    Russel, Boris Mariboe; Henriksen, Jens Peter; Jørgensen, Sten Bay

    2002-01-01

    A systematic computer aided analysis of the process model is proposed as a pre-solution step for integration of design and control problems. The process model equations are classified in terms of balance equations, constitutive equations and conditional equations. Analysis of the phenomena models...... representing the constitutive equations identify the relationships between the important process and design variables, which help to understand, define and address some of the issues related to integration of design and control. Furthermore, the analysis is able to identify a set of process (control) variables...... and design (manipulative) variables that may be employed with different objectives in design and control for the integrated problem. The computer aided model analysis is highlighted through illustrative examples, involving processes with mass and/or energy recycle, where the important design and control...

  18. Design of dual DC motor control system based on DSP

    Science.gov (United States)

    Shi, Peicheng; Wang, Suo; Xu, Zengwei; Xiao, Ping

    2017-08-01

    Multi-motor control systems are widely used in actual production and life, such as lifting stages, robots, printing systems. This paper through serial communication between PC and DSP, dual DC motor control system consisting of PC as the host computer, DSP as the lower computer with synchronous PWM speed regulation, commutation and selection functions is designed. It sends digital control instructions with host computer serial debugger to lower computer, to instruct the motor to complete corresponding actions. The hardware and software design of the control system are given, and feasibility and validity of the control system are verified by experiments. The expected design goal is achieved.

  19. Computational architecture for integrated controls and structures design

    Science.gov (United States)

    Belvin, W. Keith; Park, K. C.

    1989-01-01

    To facilitate the development of control structure interaction (CSI) design methodology, a computational architecture for interdisciplinary design of active structures is presented. The emphasis of the computational procedure is to exploit existing sparse matrix structural analysis techniques, in-core data transfer with control synthesis programs, and versatility in the optimization methodology to avoid unnecessary structural or control calculations. The architecture is designed such that all required structure, control and optimization analyses are performed within one program. Hence, the optimization strategy is not unduly constrained by cold starts of existing structural analysis and control synthesis packages.

  20. A Standardized Mean Difference Effect Size for Multiple Baseline Designs across Individuals

    Science.gov (United States)

    Hedges, Larry V.; Pustejovsky, James E.; Shadish, William R.

    2013-01-01

    Single-case designs are a class of research methods for evaluating treatment effects by measuring outcomes repeatedly over time while systematically introducing different condition (e.g., treatment and control) to the same individual. The designs are used across fields such as behavior analysis, clinical psychology, special education, and…

  1. Analysis and design of controllers for a double inverted pendulum

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, J K

    2003-01-01

    A physical control problem is studied with the μ methodology. The issues of modelling, uncertainty modelling, performance specification, controller design and laboratory implementation are discussed. The laboratory experiment is a double inverted pendulum placed on a cart. The limitations...... in the system with respect to performance are the limitation in the control signal and the limitation of the movement of the chart. It is shown how these performance limitation will effect the design of a μ controller for the system....

  2. Design features of an automated entry control system

    International Nuclear Information System (INIS)

    Reynolds, D.A.

    1978-01-01

    Features of an entry control system designed to automatically control access to nuclear facilities is described. Control independent of variable human factors is stressed, but security force action is required for assessment and response as a result of an alarm. A design based on a distributed processing capability is utilized. Flexibility and generality are emphasized in an effort to maximize applicability to the entry-control problem faced by nuclear facilities upgrading security as a result of the Safeguards Program

  3. Nonlinear Control Theory for Missile Autopilot Design.

    Science.gov (United States)

    1987-04-24

    tan 2.9) a -q W "pc Sientific Systems FcoS -Fs n + (p cos6 + q sind) tana coso (2.10) where V is the velocity: V = (u2 + v 2 + w2 ) 1 1 2 The terms...1984), "How Autopilot Requirements Constrain the Aerodynamic Design of Homing Missiles", Proc. American Contr. Conf., San Diego, CA, pp 71b-73U. I .N

  4. Software Design Concepts for Archiving and Retrieving Control System Data

    International Nuclear Information System (INIS)

    Christopher Larrieu; Matt Bickley

    2001-01-01

    To develop and operate the control system effectively at the Thomas Jefferson National Accelerator Facility, users require the ability to diagnose its behavior not only in real-time, but also in retrospect. The new Jefferson Lab data logging system provides an acquisition and storage component capable of archiving enough data to provide suitable context for such analyses. In addition, it provides an extraction and presentation-facility which efficiently fulfills requests for both raw and processed data. This paper discusses several technologies and design methodologies which contribute to the system's overall utility. The Application Programming Interface (API) which developers use to access the data derives from a view of the storage system as a specialized relational database. An object-oriented and compartmental design contributes to its portability at several levels, and the use of CORBA facilitates interaction between distributed components in an industry-standard fashion. This work was supported by the U.S. DOE contract No. DE-AC05-84ER40150

  5. The design of control system of livestock feeding processing

    Science.gov (United States)

    Sihombing, Juna; Napitupulu, Humala L.; Hidayati, Juliza

    2018-03-01

    PT. XYZ is a company that produces animal feed. One type of animal feed produced is 105 ISA P. In carrying out its production process, PT. XYZ faces the problem of rejected feed amounts during 2014 to June 2015 due to the amount of animal feed that exceeds the standard feed quality of 13% of moisture content and 3% for ash content. Therefore, the researchers analyzed the relationship between factors affecting the quality and extent of damage by using regression and correlation and determine the optimum value of each processing process. Analysis results found that variables affecting product quality are mixing time, steam conditioning temperature and cooling time. The most dominant variable affecting the product moisture content is mixing time with the correlation coefficient of (0.7959) and the most dominant variable affecting the ash content of the product during the processing is mixing time with the correlation coefficient of (0.8541). The design of the proposed product processing control is to run the product processing process with mixing time 235 seconds, steam conditioning temperature 87 0C and cooling time 192 seconds. Product quality 105 ISA P obtained by using this design is with 12.16% moisture content and ash content of 2.59%.

  6. Designing agricultural landscapes for natural pest control

    NARCIS (Netherlands)

    Steingrover, E.G.; Geertsema, W.; Wingerden, van W.K.R.E.

    2010-01-01

    The green–blue network of semi-natural non-crop landscape elements in agricultural landscapes has the potential to enhance natural pest control by providing various resources for the survival of beneficial insects that suppress crop pests. A study was done in the Hoeksche Waard to explore how

  7. Designing the Undesignable: Social Software and Control

    Science.gov (United States)

    Dron, Jon

    2007-01-01

    Social software, such as blogs, wikis, tagging systems and collaborative filters, treats the group as a first-class object within the system. Drawing from theories of transactional distance and control, this paper proposes a model of e-learning that extends traditional concepts of learner-teacher-content interactions to include these emergent…

  8. Standard Practice for Preparation of Aerospace Contamination Control Plans

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice is intended to assist in the preparation of formal plans for contamination control, especially of aerospace critical surfaces. Requirements may be established at the systems level, either by the customer or the systems integrator, or at the subsystem level. Subsystem requirements may be imposed by the responsible subsystem supplier or they may be flowed down from the systems organization (4.7). The extent of detail and level of cleanliness required can vary with the particular application and type of hardware being built, but all aspects of contamination control must be included in a final plan. Therefore, each of the following elements must be considered for inclusion in a contamination control plan (CCP): 1.1.1 Cleanliness requirements for deliverable hardware addressing particulate, molecular, or biological contaminants or combination thereof. Specify contamination limits and any budget allocations. 1.1.2 Implementation plans to achieve, verify, and maintain the specified cleanliness re...

  9. Adaptive Controller Design for Faulty UAVs via Quantum Information Technology

    Directory of Open Access Journals (Sweden)

    Fuyang Chen

    2012-12-01

    Full Text Available In this paper, an adaptive controller is designed for a UAV flight control system against faults and parametric uncertainties based on quantum information technology and the Popov hyperstability theory. First, considering the bounded control input, the state feedback controller is designed to make the system stable. The model of adaptive control is introduced to eliminate the impact by the uncertainties of system parameters via quantum information technology. Then, according to the model reference adaptive principle, an adaptive control law based on the Popov hyperstability theory is designed. This law enable better robustness of the flight control system and tracking control performances. The closed-loop system's stability is guaranteed by the Popov hyperstability theory. The simulation results demonstrate that a better dynamic performance of the UAV flight control system with faults and parametric uncertainties can be maintained with the proposed method.

  10. Meeting Classroom Needs: Designing Space Physics Educational Outreach for Science Education Standards

    Science.gov (United States)

    Urquhart, M. L.; Hairston, M.

    2008-12-01

    As with all NASA missions, the Coupled Ion Neutral Dynamics Investigation (CINDI) is required to have an education and public outreach program (E/PO). Through our partnership between the University of Texas at Dallas William B. Hanson Center for Space Sciences and Department of Science/Mathematics Education, the decision was made early on to design our educational outreach around the needs of teachers. In the era of high-stakes testing and No Child Left Behind, materials that do not meet the content and process standards teachers must teach cannot be expected to be integrated into classroom instruction. Science standards, both state and National, were the fundamental drivers behind the designs of our curricular materials, professional development opportunities for teachers, our target grade levels, and even our popular informal educational resource, the "Cindi in Space" comic book. The National Science Education Standards include much more than content standards, and our E/PO program was designed with this knowledge in mind as well. In our presentation we will describe how we came to our approach for CINDI E/PO, and how we have been successful in our efforts to have CINDI materials and key concepts make the transition into middle school classrooms. We will also present on our newest materials and high school physics students and professional development for their teachers.

  11. Sandia National Laboratories Facilities Management and Operations Center Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Timothy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    At Sandia National Laboratories in New Mexico (SNL/NM), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/NM applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safety and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule. These design standards generally apply to all disciplines on all SNL/NM projects. Architectural and engineering design must be both functional and cost-effective. Facility design must be tailored to fit its intended function, while emphasizing low-maintenance, energy-efficient, and energy-conscious design. Design facilities that can be maintained easily, with readily accessible equipment areas, low maintenance, and quality systems. To promote an orderly and efficient appearance, architectural features of new facilities must complement and enhance the existing architecture at the site. As an Architectural and Engineering (A/E) professional, you must advise the Project Manager when this approach is prohibitively expensive. You are encouraged to use professional judgment and ingenuity to produce a coordinated interdisciplinary design that is cost-effective, easily contractible or buildable, high-performing, aesthetically pleasing, and compliant with applicable building codes. Close coordination and development of civil, landscape, structural, architectural, fire

  12. Generalized ESO and Predictive Control Based Robust Autopilot Design

    Directory of Open Access Journals (Sweden)

    Bhavnesh Panchal

    2016-01-01

    Full Text Available A novel continuous time predictive control and generalized extended state observer (GESO based acceleration tracking pitch autopilot design is proposed for a tail controlled, skid-to-turn tactical missile. As the dynamics of missile are significantly uncertain with mismatched uncertainty, GESO is employed to estimate the state and uncertainty in an integrated manner. The estimates are used to meet the requirement of state and to robustify the output tracking predictive controller designed for nominal system. Closed loop stability for the controller-observer structure is established. An important feature of the proposed design is that it does not require any specific information about the uncertainty. Also the predictive control design yields the feedback control gain and disturbance compensation gain simultaneously. Effectiveness of GESO in estimation of the states and uncertainties and in robustifying the predictive controller in the presence of parametric uncertainties, external disturbances, unmodeled dynamics, and measurement noise is illustrated by simulation.

  13. Design Criteria for Controlling Stress Corrosion Cracking

    Science.gov (United States)

    Franklin, D. B.

    1987-01-01

    This document sets forth the criteria to be used in the selection of materials for space vehicles and associated equipment and facilities so that failure resulting from stress corrosion will be prevented. The requirements established herein apply to all metallic components proposed for use in space vehicles and other flight hardware, ground support equipment, and facilities for testing. These requirements are applicable not only to items designed and fabricated by MSFC (Marshall Space Flight Center) and its prime contractors, but also to items supplied to the prime contractor by subcontractors and vendors.

  14. 75 FR 55269 - Minimum Internal Control Standards for Class II Gaming

    Science.gov (United States)

    2010-09-10

    ...-37 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission... to implement tribal internal controls found in Sec. 543.3(c)(3) to October 13, 2011, in order to... superseded specified sections [[Page 55270

  15. 77 FR 20388 - California State Nonroad Engine Pollution Control Standards; Large Spark-Ignition (LSI) Engines...

    Science.gov (United States)

    2012-04-04

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9655-9] California State Nonroad Engine Pollution Control Standards; Large Spark-Ignition (LSI) Engines; New Emission Standards and In-Use Fleet Requirements; Notice... emission standards and certification and test procedures for large spark-ignition nonroad engines and in...

  16. Standard formatted data units-control authority operations

    Science.gov (United States)

    1991-01-01

    The purpose of this document is to illustrate a Control Authority's (CA) possible operation. The document is an interpretation and expansion of the concept found in the CA Procedures Recommendation. The CA is described in terms of the functions it performs for the management and control of data descriptions (metadata). Functions pertaining to the organization of Member Agency Control Authority Offices (MACAOs) (e.g., creating and disbanding) are not discussed. The document also provides an illustrative operational view of a CA through scenarios describing interaction between those roles involved in collecting, controlling, and accessing registered metadata. The roles interacting with the CA are identified by their actions in requesting and responding to requests for metadata, and by the type of information exchanged. The scenarios and examples presented in this document are illustrative only. They represent possible interactions supported by either a manual or automated system. These scenarios identify requirements for an automated system. These requirements are expressed by identifying the information to be exchanged and the services that may be provided by a CA for that exchange.

  17. Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

    Science.gov (United States)

    Smith, Justin D.

    2013-01-01

    This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have precluded widespread implementation and acceptance of the SCED as a viable complementary methodology to the predominant group design. This article includes a description of the research design, measurement, and analysis domains distinctive to the SCED; a discussion of the results within the framework of contemporary standards and guidelines in the field; and a presentation of updated benchmarks for key characteristics (e.g., baseline sampling, method of analysis), and overall, it provides researchers and reviewers with a resource for conducting and evaluating SCED research. The results of the systematic review of 409 studies suggest that recently published SCED research is largely in accordance with contemporary criteria for experimental quality. Analytic method emerged as an area of discord. Comparison of the findings of this review with historical estimates of the use of statistical analysis indicates an upward trend, but visual analysis remains the most common analytic method and also garners the most support amongst those entities providing SCED standards. Although consensus exists along key dimensions of single-case research design and researchers appear to be practicing within these parameters, there remains a need for further evaluation of assessment and sampling techniques and data analytic methods. PMID:22845874

  18. HCPB TBM thermo mechanical design: Assessment with respect codes and standards and DEMO relevancy

    International Nuclear Information System (INIS)

    Cismondi, F.; Kecskes, S.; Aiello, G.

    2011-01-01

    In the frame of the activities of the European TBM Consortium of Associates the Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) is developed in Karlsruhe Institute of Technology (KIT). After performing detailed thermal and fluid dynamic analyses of the preliminary HCPB TBM design, the thermo mechanical behaviour of the TBM under typical ITER loads has to be assessed. A synthesis of the different design options proposed has been realized building two different assemblies of the HCPB-TBM: these two assemblies and the analyses performed on them are presented in this paper. Finite Element thermo-mechanical analyses of two detailed 1/4 scaled models of the HCPB-TBM assemblies proposed have been performed, with the aim of verifying the accordance of the mechanical behaviour with the criteria of the design codes and standards. The structural design limits specified in the codes and standard are discussed in relation with the EUROFER available data and possible damage modes. Solutions to improve the weak structural points of the present design are identified and the DEMO relevancy of the present thermal and structural design parameters is discussed.

  19. Adaptive Neuro-Fuzzy Inference System based DVR Controller Design

    Directory of Open Access Journals (Sweden)

    Brahim FERDI

    2011-06-01

    Full Text Available PI controller is very common in the control of DVRs. However, one disadvantage of this conventional controller is its inability to still working well under a wider range of operating conditions. So, as a solution fuzzy controller is proposed in literature. But, the main problem with the conventional fuzzy controllers is that the parameters associated with the membership functions and the rules depend broadly on the intuition of the experts. To overcome this problem, Adaptive Neuro-Fuzzy Inference System (ANFIS based controller design is proposed. The resulted controller is composed of Sugeno fuzzy controller with two inputs and one output. According to the error and error rate of the control system and the output data, ANFIS generates the appropriate fuzzy controller. The simulation results have proved that the proposed design method gives reliable powerful fuzzy controller with a minimum number of membership functions.

  20. The Designing Bus for Nuclear Safety Class Controller

    International Nuclear Information System (INIS)

    Lee, Dongil; Lee, Myeongkyun; Yun, Donghwa; Ryoo, Kwangki

    2013-01-01

    EtherCAT (Ethernet for Control Automation Technology) is based on the IEEE 802.3 standard as one of the communication which is the I/O (Input/Output), sensors and communication function of PLC (Programmable Logic Controller) in industry and factory environment use is increasing. The Nuclear Safety Class Controller implemented by the EtherCAT applied bus can be shown the improving performance of data transmission in the controller

  1. Design and Analysis of Morpheus Lander Flight Control System

    Science.gov (United States)

    Jang, Jiann-Woei; Yang, Lee; Fritz, Mathew; Nguyen, Louis H.; Johnson, Wyatt R.; Hart, Jeremy J.

    2014-01-01

    The Morpheus Lander is a vertical takeoff and landing test bed vehicle developed to demonstrate the system performance of the Guidance, Navigation and Control (GN&C) system capability for the integrated autonomous landing and hazard avoidance system hardware and software. The Morpheus flight control system design must be robust to various mission profiles. This paper presents a design methodology for employing numerical optimization to develop the Morpheus flight control system. The design objectives include attitude tracking accuracy and robust stability with respect to rigid body dynamics and propellant slosh. Under the assumption that the Morpheus time-varying dynamics and control system can be frozen over a short period of time, the flight controllers are designed to stabilize all selected frozen-time control systems in the presence of parametric uncertainty. Both control gains in the inner attitude control loop and guidance gains in the outer position control loop are designed to maximize the vehicle performance while ensuring robustness. The flight control system designs provided herein have been demonstrated to provide stable control systems in both Draper Ares Stability Analysis Tool (ASAT) and the NASA/JSC Trick-based Morpheus time domain simulation.

  2. Reassessing RCTs as the "Gold Standard": Synergy Not Separatism in Evaluation Designs

    Science.gov (United States)

    Hanley, Pam; Chambers, Bette; Haslam, Jonathan

    2016-01-01

    Randomised controlled trials (RCTs) are increasingly used to evaluate educational interventions in the UK. However, RCTs remain controversial for some elements of the research community. This paper argues that the widespread use of the term "gold standard" to describe RCTs is problematic, as it implies that other research methods are…

  3. Design and control considerations for industrial and space manipulators

    Science.gov (United States)

    Whitney, D. E.; Book, W. J.; Lynch, P. M.

    1974-01-01

    This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

  4. Estimated Frequency Domain Model Uncertainties used in Robust Controller Design

    DEFF Research Database (Denmark)

    Tøffner-Clausen, S.; Andersen, Palle; Stoustrup, Jakob

    1994-01-01

    This paper deals with the combination of system identification and robust controller design. Recent results on estimation of frequency domain model uncertainty are......This paper deals with the combination of system identification and robust controller design. Recent results on estimation of frequency domain model uncertainty are...

  5. Design considerations for a micromachined proportional control valve

    NARCIS (Netherlands)

    Groen, Maarten; Brouwer, Dannis Michel; Wiegerink, Remco J.; Lötters, Joost Conrad

    2012-01-01

    Precise mass flow control is an essential requirement for novel, small-scale fluidic systems. However, a small-volume, low-leakage proportional control valve for minute fluid flows has not yet been designed or manufactured. A survey is therefore made of the primary design considerations of a

  6. The case-control design in veterinary sciences: A survey.

    Science.gov (United States)

    Cullen, Jonah N; Sargeant, Jan M; Makielski, Kelly M; O'Connor, Annette M

    2016-11-01

    The case-control study design is deceptively simple. However, many design considerations influence the estimated effect measure. An investigation of case-control studies in the human health literature suggested that some of these considerations are not described in reports of case-control studies. Our hypothesis was that the majority of veterinary studies labeled as case-controls would be incident density designs, and many would not interpret the effect measure obtained from those studies as the rate ratio rather than the odds ratio. Reference databases were searched for author-designated case-control studies. A survey of 100 randomly selected studies was conducted to examine the different design options described and estimated effect measures. Of the 100 author-identified case-control studies, 83 assessed an exposure-outcome association and, of those, only 54 (65.1%) sampled the study population based on an outcome and would thus be considered case-control designs. Twelve studies were incidence density designs but none used this terminology. Of the studies that reported an odds ratio as the effect measure, none reported on additional considerations that would have enabled a more interpretable result. This survey indicated many case-control-labeled studies were not case-control designs and among case-control studies, key design aspects were not often described. The absence of information about study design elements and underlying assumptions in case-control studies limits the ability to establish the effect measured by the study and the evidentiary value of the study might be underestimated. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Controlling and tracking hyperchaotic Roessler system via active backstepping design

    International Nuclear Information System (INIS)

    Zhang Hao; Ma Xikui; Li Ming; Zou Jianlong

    2005-01-01

    This paper presents a novel active backstepping control approach for controlling hyperchaotic Roessler system to a steady state as well as tracking of any desire trajectory to be achieved in a systematic way. The proposed method is a systematic design approach and consists in a recursive procedure that interlaces the choice of a Lyapunov function with the design of active control. Numerical results show that the controller is singularity free and the closed-loop system is stable globally. Especially, the main feature of this technique is that it gives the flexibility to construct a control law. Finally, numerical experiments verify the feasibility and effectiveness of the proposed control technique

  8. Controlling experience or experiencing control? Reversal theory & design for play

    NARCIS (Netherlands)

    Van Leeuwen, L.; Gielen, M.A.; Westwood, D.

    2012-01-01

    Using Reversal Theory (Apter, 2002, 2007a) as an example this paper proposes a way to ‘translate’ a psychological concept into the realm of design in a way that maximizes understanding and potential for application in the context of play. The given presentation of Reversal Theory is the result of

  9. Review of FFTF and CRBRP control rod systems designs

    International Nuclear Information System (INIS)

    Pitterle, T.A.; Lagally, H.O.

    1977-01-01

    The evolution of the primary control rod system design for FFTF and CRBR, beginning with the initial choice of the basic concepts, is described. The significant component and systems tests are reviewed together with the test results which referenced the development of the CRBR primary control rod system design. Modifications to the concepts and detail designs of the FFTF control rod system were required principally to satisfy the requirements of CRBR, and at the same time incorporating design refinements shown desirable by the tests

  10. Quantitative Analysis and Design of a Rudder Roll Damping Controller

    DEFF Research Database (Denmark)

    Hearns, G.; Blanke, M.

    1998-01-01

    A rudder roll damping controller is designed using Quantitative feedback theory to be robust for changes in the ships metacentric height. The analytical constraint due to the non-minimum phase behaviour of the rudder to roll is analysed using the Poisson Integral Formula and it is shown how...... the design tradeoffs in closed-loop roll reduction can be approximated using this formula before a controller is designed. The robust roll and course keeping controllers designed are then tested using a nonlinear simulation....

  11. DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.

    Science.gov (United States)

    Ruano, M V; Ribes, J; Seco, A; Ferrer, J

    2011-01-01

    This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communication protocol for different industrial process applications. The potential capabilities of the DSC tool are illustrated through the example of a full-scale application. An aeration control system applied to a nutrient removing WWTP was designed, tuned and evaluated with the DSC tool before its implementation in the full scale plant. The control parameters obtained by simulation were suitable for the full scale plant with only few modifications to improve the control performance. With the DSC tool, the control systems performance can be easily evaluated by simulation. Once developed and tuned by simulation, the control systems can be directly applied to the full-scale WWTP.

  12. A Robotics Systems Design Need: A Design Standard to Provide the Systems Focus that is Required for Longterm Exploration Efforts

    Science.gov (United States)

    Dischinger, H. Charles., Jr.; Mullins, Jeffrey B.

    2005-01-01

    The United States is entering a new period of human exploration of the inner Solar System, and robotic human helpers will be partners in that effort. In order to support integration of these new worker robots into existing and new human systems, a new design standard should be developed, to be called the Robot-Systems Integration Standard (RSIS). It will address the requirements for and constraints upon robotic collaborators with humans. These workers are subject to the same functional constraints as humans of work, reach, and visibility/situational awareness envelopes, and they will deal with the same maintenance and communication interfaces. Thus, the RSIS will be created by discipline experts with the same sort of perspective on these and other interface concerns as human engineers.

  13. Shock Positioning Controls Designs for a Supersonic Inlet

    Science.gov (United States)

    Kopasakis, George; Connolly, Joseph W.

    2010-01-01

    Under the NASA Fundamental Aeronautics Program, the Supersonics Project is working to overcome the obstacles to supersonic commercial flight. The supersonic inlet design that is utilized to efficiently compress the incoming air and deliver it to the engine has many design challenges. Among those challenges is the shock positioning of internal compression inlets, which requires active control in order to maintain performance and to prevent inlet unstarts due to upstream (freestream) and downstream (engine) disturbances. In this paper a novel feedback control technique is presented, which emphasizes disturbance attenuation among other control performance criteria, while it ties the speed of the actuation system(s) to the design of the controller. In this design, the desired performance specifications for the overall control system are used to design the closed loop gain of the feedback controller and then, knowing the transfer function of the plant, the controller is calculated to achieve this performance. The innovation is that this design procedure is methodical and allows maximization of the performance of the designed control system with respect to actuator rates, while the stability of the calculated controller is guaranteed.

  14. Control room design of a nuclear reactor used to produce radioisotope

    International Nuclear Information System (INIS)

    Santos, Isaac Jose Antonio Luquetti dos; Carvalho, Paulo Vitor R.; Lacerda, Fabio de; Szabo, Andre P.; Vianna Filho, Alfredo Marques

    2011-01-01

    A control room is defined as a functional entity with an associated physical structure, where the operators carry out the centralized control, monitoring and administrative responsibilities. Inadequate integration between control room and operators reduces safety, increases the operation complexity, complicates operator training and increases the likelihood of human errors occurrence. The purpose of this paper is to present a specific approach for the design of the main control room of a nuclear reactor used to produce radioisotope. The approach is based on human factors standards and the participation of a multidisciplinary team in the conceptual and basic phases of the design. Using the information gathered from standards and from the multidisciplinary an initial sketch 3D of the main control room is being developed. (author)

  15. Control room design of a nuclear reactor used to produce radioisotope

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Isaac Jose Antonio Luquetti dos; Carvalho, Paulo Vitor R.; Lacerda, Fabio de; Szabo, Andre P.; Vianna Filho, Alfredo Marques, E-mail: luquetti@ien.gov.br [Instituto Engenharia Nuclear (IEN/CNEN-RJ), Rio Janeiro, RJ (Brazil). Divisao de Instrumentacao e Confiabilidade Humana; Falcao, Mariana A. [Escola de Belas Artes da Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2011-07-01

    A control room is defined as a functional entity with an associated physical structure, where the operators carry out the centralized control, monitoring and administrative responsibilities. Inadequate integration between control room and operators reduces safety, increases the operation complexity, complicates operator training and increases the likelihood of human errors occurrence. The purpose of this paper is to present a specific approach for the design of the main control room of a nuclear reactor used to produce radioisotope. The approach is based on human factors standards and the participation of a multidisciplinary team in the conceptual and basic phases of the design. Using the information gathered from standards and from the multidisciplinary an initial sketch 3D of the main control room is being developed. (author)

  16. Electromagnetic design calculation of the control rod drive mechanism

    International Nuclear Information System (INIS)

    Zhu Qirong; Zhu Jingchang

    1991-01-01

    Electromagnetic design calculation of the step-by-step magnetic jacking control rod drive mechanism includes magnetic field force calculation and design calculation of magnetomotive force for three electromagnetic iron and their coilds. The basic principle and method of electromagnetic design calculation had been expounded to take the lift magnet and lift coil for example

  17. A Design of a Hybrid Non-Linear Control Algorithm

    Directory of Open Access Journals (Sweden)

    Farinaz Behrooz

    2017-11-01

    Full Text Available One of the high energy consuming devices in the buildings is the air-conditioning system. Designing a proper controller to consider the thermal comfort and simultaneously control the energy usage of the device will impact on the system energy efficiency and its performance. The aim of this study was to design a Multiple-Input and Multiple-Output (MIMO, non-linear, and intelligent controller on direct expansion air-conditioning system The control algorithm uses the Fuzzy Cognitive Map method as a main controller and the Generalized Predictive Control method is used for assigning the initial weights of the main controller. The results of the proposed controller shows that the controller was successfully designed and works in set point tracking and under disturbance rejection tests. The obtained results of the Generalized Predictive Control-Fuzzy Cognitive Map controller are compared with the previous MIMO Linear Quadratic Gaussian control design on the same direct expansion air-conditioning system under the same conditions. The comparative results indicate energy savings would be achieved with the proposed controller with long-term usage. Energy efficiency and thermal comfort conditions are achieved by the proposed controller.

  18. 77 FR 30765 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles

    Science.gov (United States)

    2012-05-23

    ... Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles; Proposed Rule #0;#0;Federal Register / Vol. 77 , No. 100 / Wednesday... Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles AGENCY: National Highway...

  19. 47 CFR 1.9010 - De facto control standard for spectrum leasing arrangements.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false De facto control standard for spectrum leasing... PROCEDURE Spectrum Leasing General Policies and Procedures § 1.9010 De facto control standard for spectrum leasing arrangements. (a) Under the rules established for spectrum leasing arrangements in this subpart...

  20. 77 FR 72851 - California State Nonroad Engine Pollution Control Standards; Portable Equipment Registration...

    Science.gov (United States)

    2012-12-06

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9758-1] California State Nonroad Engine Pollution Control... otherwise covered by a within-the-scope confirmation. \\11\\ See California State Nonroad Engine Pollution... Pollution Control Standards; Authorization of Large Off-Road Spark- Ignition Engine Standards, Notice of...

  1. Code Development for Control Design Applications: Phase I: Structural Modeling

    International Nuclear Information System (INIS)

    Bir, G. S.; Robinson, M.

    1998-01-01

    The design of integrated controls for a complex system like a wind turbine relies on a system model in an explicit format, e.g., state-space format. Current wind turbine codes focus on turbine simulation and not on system characterization, which is desired for controls design as well as applications like operating turbine model analysis, optimal design, and aeroelastic stability analysis. This paper reviews structural modeling that comprises three major steps: formation of component equations, assembly into system equations, and linearization

  2. Control system design for nano-positioning using piezoelectric actuators

    International Nuclear Information System (INIS)

    Shan, Jinjun; Liu, Yanfang; Cui, Naigang; Gabbert, Ulrich

    2016-01-01

    This paper presents a systematic control system design for nano-positioning of a piezoelectric actuator (PEA). PEAs exhibit hysteresis nonlinearity, which can dramatically limit the application and performance of linear feedback control theory. Thus the hysteresis is compensated for based on the Maxwell resistive capacitor (MRC) model first. Then a proportional plus integral (PI) controller and a proportional double integral plus lead compensation (PII and L) controller are designed for the hysteresis-compensated PEA to account for model uncertainty, disturbance, and noise. The robust stability of both controllers is proved. The effectiveness of the proposed control scheme is demonstrated experimentally. Both controllers achieve fast precise positioning. The 2% settling times for the PI controller and the PII and L controller are 1.5 ms and 4.7 ms, respectively. The positioning resolution is upto 1 nm for both controllers. (paper)

  3. Design and development of virtual TXP control system software

    International Nuclear Information System (INIS)

    Wang Yunwei; Leng Shan; Liu Zhisheng; Wang Qiang; Shang Yanxia

    2008-01-01

    Taking distributed control system (DCS) of Siemens TELEPERM-XP (TXP) as the simulation object,Virtual TXP (VTXP) control system based on Virtual DCS with high fidelity and reliability was designed and developed on the platform of Windows. In the process of development, the method of object-oriented modeling and modularization program design are adopted, C++ language and technologies such as multithreading, ActiveX control, Socket network communication are used, to realize the wide range dynamic simulation and recreate the functions of the hardware and software of real TXP. This paper puts emphasis on the design and realization of Control server and Communication server. The development of Virtual TXP control system software is with great effect on the construction of simulation system and the design, commission, verification and maintenance of control system in large-scale power plants, nuclear power plants and combined cycle power plants. (authors)

  4. Design and drafting document control procedures for CPRF/ZTH experiment

    International Nuclear Information System (INIS)

    Pollat, L.L.; Kewish, R.W.

    1989-01-01

    This paper will present, in general, the control procedures for design approval, review, changes, and release of engineering documents. It will also discuss interface control for tasks so that possible design interference does not occur. A document control procedure to insure that design criteria are met and technical specifications translate into workable drawings was instituted to support the Confinement Physics Research Facility (CPRF/ZTH) construction program. Our goal, to eliminate any conflicts that might arise between various tasks as the final designs are developed, required tight control and up-to-date design information. Detailed procedure for reviews were instituted, since circumventing the process of design and drafting anywhere might have proven disastrous to the CPRF/ZTH program. Design is a process of translating technical requirements, according to established standards, into drawings that are usable for fabrication and assembly. Both the designer and engineer are responsible for adhering to standards that have been established by the Mechanical Engineering Section for the CPRF/ZTH program. 6 refs., 5 figs

  5. Survey of control-room design practices with respect to human factors engineering

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1980-01-01

    Human factors engineering is an interdisciplinary speciality concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. This emphasis has been applied to most military and space systems in the past 30 y. A review of five nuclear power-plant control rooms, reported in the November-December 1977 issue of Nuclear Safety, revealed that human factors principles of design have generally not been incorporated in present-generation control rooms. This article summarizes the findings of a survey of 20 control-board designers from a mix of nuclear steam-supply system and architect-engineering firms. The interviews with these designers probed design methods currently used in developing control rooms. From these data it was concluded that there is currently no consistent, formal, uniform concern for the human factors aspects of control-room design on the part of the design organizations, the utilities, or the Nuclear Regulatory Commission. Although all the parties involved are concerned with human factors issues, this responsibility is not focused, and human factors yardsticks, or design standards, specific to power plants have not been evolved and applied in the development and verification of control-room designs from the standpoint of the man-machine interface

  6. Control system design for flexible structures using data models

    Science.gov (United States)

    Irwin, R. Dennis; Frazier, W. Garth; Mitchell, Jerrel R.; Medina, Enrique A.; Bukley, Angelia P.

    1993-01-01

    The dynamics and control of flexible aerospace structures exercises many of the engineering disciplines. In recent years there has been considerable research in the developing and tailoring of control system design techniques for these structures. This problem involves designing a control system for a multi-input, multi-output (MIMO) system that satisfies various performance criteria, such as vibration suppression, disturbance and noise rejection, attitude control and slewing control. Considerable progress has been made and demonstrated in control system design techniques for these structures. The key to designing control systems for these structures that meet stringent performance requirements is an accurate model. It has become apparent that theoretically and finite-element generated models do not provide the needed accuracy; almost all successful demonstrations of control system design techniques have involved using test results for fine-tuning a model or for extracting a model using system ID techniques. This paper describes past and ongoing efforts at Ohio University and NASA MSFC to design controllers using 'data models.' The basic philosophy of this approach is to start with a stabilizing controller and frequency response data that describes the plant; then, iteratively vary the free parameters of the controller so that performance measures become closer to satisfying design specifications. The frequency response data can be either experimentally derived or analytically derived. One 'design-with-data' algorithm presented in this paper is called the Compensator Improvement Program (CIP). The current CIP designs controllers for MIMO systems so that classical gain, phase, and attenuation margins are achieved. The center-piece of the CIP algorithm is the constraint improvement technique which is used to calculate a parameter change vector that guarantees an improvement in all unsatisfied, feasible performance metrics from iteration to iteration. The paper also

  7. The human factors specialist in nuclear control centre design

    International Nuclear Information System (INIS)

    Wilson, R.B.; Beattie, J.D.

    The main focus at Ontario Hydro for man-machine interface design is in the design of control centres. Because the control of a nuclear generating unit is highly centralized there is an increasing need for effective information display and control layout. Control panel design innovations such as the use of CRT displays and the extended use of computerized control in the Darlington station have made it possible for Ontario Hydro to continue to have one first operator for each generating unit. The human factors specialist involved in control panel design must deal with people who know much more about the specific systems being controlled, and must become a generalist in all these systems as well. Designers have to use conceptual techniques such as task analysis, systems design, panel mock-ups, anthropometric data, and personal judgement based on experience as they design panels. They must find a balance between becoming locked into existing technology and methods, slavishly following the latest technological trends, and forgetting that real people will be using what they design

  8. Review on design and control aspects of ankle rehabilitation robots.

    Science.gov (United States)

    Jamwal, Prashant K; Hussain, Shahid; Xie, Sheng Q

    2015-03-01

    Ankle rehabilitation robots can play an important role in improving outcomes of the rehabilitation treatment by assisting therapists and patients in number of ways. Consequently, few robot designs have been proposed by researchers which fall under either of the two categories, namely, wearable robots or platform-based robots. This paper presents a review of both kinds of ankle robots along with a brief analysis of their design, actuation and control approaches. While reviewing these designs it was observed that most of them are undesirably inspired by industrial robot designs. Taking note of the design concerns of current ankle robots, few improvements in the ankle robot designs have also been suggested. Conventional position control or force control approaches, being used in the existing ankle robots, have been reviewed. Apparently, opportunities of improvement also exist in the actuation as well as control of ankle robots. Subsequently, a discussion on most recent research in the development of novel actuators and advanced controllers based on appropriate physical and cognitive human-robot interaction has also been included in this review. Implications for Rehabilitation Ankle joint functions are restricted/impaired as a consequence of stroke or injury during sports or otherwise. Robots can help in reinstating functions faster and can also work as tool for recording rehabilitation data useful for further analysis. Evolution of ankle robots with respect to their design and control aspects has been discussed in the present paper and a novel design with futuristic control approach has been proposed.

  9. Chemical optimization algorithm for fuzzy controller design

    CERN Document Server

    Astudillo, Leslie; Castillo, Oscar

    2014-01-01

    In this book, a novel optimization method inspired by a paradigm from nature is introduced. The chemical reactions are used as a paradigm to propose an optimization method that simulates these natural processes. The proposed algorithm is described in detail and then a set of typical complex benchmark functions is used to evaluate the performance of the algorithm. Simulation results show that the proposed optimization algorithm can outperform other methods in a set of benchmark functions. This chemical reaction optimization paradigm is also applied to solve the tracking problem for the dynamic model of a unicycle mobile robot by integrating a kinematic and a torque controller based on fuzzy logic theory. Computer simulations are presented confirming that this optimization paradigm is able to outperform other optimization techniques applied to this particular robot application

  10. Dissipative rendering and neural network control system design

    Science.gov (United States)

    Gonzalez, Oscar R.

    1995-01-01

    Model-based control system designs are limited by the accuracy of the models of the plant, plant uncertainty, and exogenous signals. Although better models can be obtained with system identification, the models and control designs still have limitations. One approach to reduce the dependency on particular models is to design a set of compensators that will guarantee robust stability to a set of plants. Optimization over the compensator parameters can then be used to get the desired performance. Conservativeness of this approach can be reduced by integrating fundamental properties of the plant models. This is the approach of dissipative control design. Dissipative control designs are based on several variations of the Passivity Theorem, which have been proven for nonlinear/linear and continuous-time/discrete-time systems. These theorems depend not on a specific model of a plant, but on its general dissipative properties. Dissipative control design has found wide applicability in flexible space structures and robotic systems that can be configured to be dissipative. Currently, there is ongoing research to improve the performance of dissipative control designs. For aircraft systems that are not dissipative active control may be used to make them dissipative and then a dissipative control design technique can be used. It is also possible that rendering a system dissipative and dissipative control design may be combined into one step. Furthermore, the transformation of a non-dissipative system to dissipative can be done robustly. One sequential design procedure for finite dimensional linear time-invariant systems has been developed. For nonlinear plants that cannot be controlled adequately with a single linear controller, model-based techniques have additional problems. Nonlinear system identification is still a research topic. Lacking analytical models for model-based design, artificial neural network algorithms have recently received considerable attention. Using

  11. Design and Control of Hydronic Radiant Cooling Systems

    Science.gov (United States)

    Feng, Jingjuan

    Improving energy efficiency in the Heating Ventilation and Air conditioning (HVAC) systems in buildings is critical to achieve the energy reduction in the building sector, which consumes 41% of all primary energy produced in the United States, and was responsible for nearly half of U.S. CO2 emissions. Based on a report by the New Building Institute (NBI), when HVAC systems are used, about half of the zero net energy (ZNE) buildings report using a radiant cooling/heating system, often in conjunction with ground source heat pumps. Radiant systems differ from air systems in the main heat transfer mechanism used to remove heat from a space, and in their control characteristics when responding to changes in control signals and room thermal conditions. This dissertation investigates three related design and control topics: cooling load calculations, cooling capacity estimation, and control for the heavyweight radiant systems. These three issues are fundamental to the development of accurate design/modeling tools, relevant performance testing methods, and ultimately the realization of the potential energy benefits of radiant systems. Cooling load calculations are a crucial step in designing any HVAC system. In the current standards, cooling load is defined and calculated independent of HVAC system type. In this dissertation, I present research evidence that sensible zone cooling loads for radiant systems are different from cooling loads for traditional air systems. Energy simulations, in EnergyPlus, and laboratory experiments were conducted to investigate the heat transfer dynamics in spaces conditioned by radiant and air systems. The results show that the magnitude of the cooling load difference between the two systems ranges from 7-85%, and radiant systems remove heat faster than air systems. For the experimental tested conditions, 75-82% of total heat gain was removed by radiant system during the period when the heater (simulating the heat gain) was on, while for air

  12. Ergonomic Analysis of Tricycle Sidecar Seats: Basis for Proposed Standard Design

    Directory of Open Access Journals (Sweden)

    Michael C. Godoy

    2015-12-01

    Full Text Available Ergonomics (also called human factors engineering is the study of human characteristics for the appropriate design of the living and work environment. It is applied in various industrial areas which includes transportation.Tricycle being one of the most common means of public transportation in Lipa City has various adaptations to suit the culture, and environment. The purpose of this study is to analyze the variability in design of the tricycles in Lipa City, Philippines and propose a standard ergonomically designed tricycle sidecar seat for a greater population. The study was conducted at 26 tricycle terminals with 232 tricycle samples within Lipa City proper including the public market area where 400 commuters were given questionnaires to determine the risk factors associated with the existing tricycle sidecar seat design. Anthropometric measurements of 100 males and 100 female commuters were obtained together with the sidecar dimensions of 232 tricycles to substantiate the observed variations in design. Using the design for the average and design for the extremes, it was found out that most of the tricycles in Lipa City, Philippines have inappropriate inclined seat and lowered sidecar seat pan height which can result to leg and abdominal pain; narrowed seat pan depth which caused pressure on buttocks and legs; narrowed backrest width which can cause upper and low back pain; low backrest height that can pose upper back pain; which can also result to abdominal pain; inclined backrest and limited vertical clearance which can cause upper back pain and neck pain. The researcher proposed a sidecar seat design standard which can be used by the Land Transportation Office, and Land Transportation Franchising and Regulatory Board to provide ease, comfort, and convenience to the passengers.

  13. Development of reliability-based design and assessment standards for onshore gas transmission pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Joe; Rothwell, Brian [TransCanada PipeLines Ltd., Calgary, AB (Canada); Nessim, Maher; Zhou, Wenxing [C-FER Technologies, Edmonton, AB (Canada)

    2005-07-01

    Onshore pipelines have traditionally been designed with a deterministic stress based methodology. The changing operating environment has however imposed many challenges to the pipeline industry, including heightened public awareness of risk, more challenging natural hazards and increased economic competitiveness. To meet the societal expectation of pipeline safety and enhance the competitiveness of the pipeline industry, significant efforts have been spent for the development of reliability-based design and assessment (RBDA) methodology. This paper will briefly review the technology development in the RBDA area and the focus will be on the progresses in the past years in standard development within the American Society of Mechanical Engineers (ASME) and the Canadian Standard Association (CSA) organizations. (author)

  14. LQR Based PID Controller Design for 3-DOF Helicopter System

    OpenAIRE

    Santosh Kr. Choudhary

    2014-01-01

    In this article, LQR based PID controller design for 3DOF helicopter system is investigated. The 3-DOF helicopter system is a benchmark laboratory model having strongly nonlinear characteristics and unstable dynamics which make the control of such system a challenging task. This article first presents the mathematical model of the 3DOF helicopter system and then illustrates the basic idea and technical formulation for controller design. The paper explains the simple appro...

  15. Conceptual design for the NSTX Central Instrumentation and Control System

    International Nuclear Information System (INIS)

    Bashore, D.; Oliaro, G.; Roney, P.; Sichta, P.; Tindall, K.

    1997-01-01

    The design and construction phase for the National Spherical Torus Experiment (NSTX) is under way at the Princeton Plasma Physics Laboratory (PPPL). Operation is scheduled to begin on April 30, 1999. This paper describes the conceptual design for the NSTX Central Instrumentation and Control (I and C) System. Major elements of the Central I and C System include the Process Control System, Plasma Control System, Network System, Data Acquisition System, and Synchronization System to support the NSTX experimental device

  16. Fully probabilistic control design in an adaptive critic framework

    Czech Academy of Sciences Publication Activity Database

    Herzallah, R.; Kárný, Miroslav

    2011-01-01

    Roč. 24, č. 10 (2011), s. 1128-1135 ISSN 0893-6080 R&D Projects: GA ČR GA102/08/0567 Institutional research plan: CEZ:AV0Z10750506 Keywords : Stochastic control design * Fully probabilistic design * Adaptive control * Adaptive critic Subject RIV: BC - Control Systems Theory Impact factor: 2.182, year: 2011 http://library.utia.cas.cz/separaty/2011/AS/karny-0364820.pdf

  17. Feedback Control Design for a Walking Athlete Robot

    Directory of Open Access Journals (Sweden)

    Xuan Vu Trien Nguyen

    2017-06-01

    Full Text Available In the paper, authors generalized the dynamic model of an athlete robot with elastic legs through Lagrange method. Then, a feed-back controller was designed to control the robot through a step-walking. The research just focused on stance phase – the period that robot just touched one leg on the ground. The simulation results showed that system worked well with the designed controller.

  18. Neural network application to aircraft control system design

    Science.gov (United States)

    Troudet, Terry; Garg, Sanjay; Merrill, Walter C.

    1991-01-01

    The feasibility of using artificial neural network as control systems for modern, complex aerospace vehicles is investigated via an example aircraft control design study. The problem considered is that of designing a controller for an integrated airframe/propulsion longitudinal dynamics model of a modern fighter aircraft to provide independent control of pitch rate and airspeed responses to pilot command inputs. An explicit model following controller using H infinity control design techniques is first designed to gain insight into the control problem as well as to provide a baseline for evaluation of the neurocontroller. Using the model of the desired dynamics as a command generator, a multilayer feedforward neural network is trained to control the vehicle model within the physical limitations of the actuator dynamics. This is achieved by minimizing an objective function which is a weighted sum of tracking errors and control input commands and rates. To gain insight in the neurocontrol, linearized representations of the nonlinear neurocontroller are analyzed along a commanded trajectory. Linear robustness analysis tools are then applied to the linearized neurocontroller models and to the baseline H infinity based controller. Future areas of research identified to enhance the practical applicability of neural networks to flight control design.

  19. Study About Ceiling Design for Main Control Room of NPP with HFE

    Science.gov (United States)

    Gu, Pengfei; Ni, Ying; Chen, Weihua; Chen, Bo; Zhang, Jianbo; Liang, Huihui

    Recently since human factor engineering (HFE) has been used in control room design of nuclear power plant (NPP), the human-machine interface (HMI) has been gradual to develop harmoniously, especially the use of the digital technology. Comparing with the analog technology which was used to human-machine interface in the past, human-machine interaction has been more enhanced. HFE and the main control room (MCR) design engineering of NPP is a combination of multidisciplinary cross, mainly related to electrical and instrument control, reactor, machinery, systems engineering and management disciplines. However, MCR is not only equipped with HMI provided by the equipments, but also more important for the operator to provide a work environment, such as the main control room ceiling. The ceiling design of main control room related to HFE which influences the performance of staff should also be considered in the design of the environment and aesthetic factors, especially the introduction of professional design experience and evaluation method. Based on Ling Ao phase II and Hong Yanhe project implementation experience, the study analyzes lighting effect, space partition, vision load about the ceiling of main control room of NPP. Combining with the requirements of standards, the advantages and disadvantages of the main control room ceiling design has been discussed, and considering the requirements of lightweight, noise reduction, fire prevention, moisture protection, the ceiling design solution of the main control room also has been discussed.

  20. 49 CFR 571.101 - Standard No. 101; Controls and displays.

    Science.gov (United States)

    2010-10-01

    ... in selecting controls. S3. Application. This standard applies to passenger cars, multipurpose... car, multipurpose passenger vehicle, truck and bus that is fitted with a control, a telltale or an... have an “off” position. S5.2.8Each control for an automatic vehicle speed system (cruise control) and...