Benchmarking Sustainability Practices Use throughout Industrial Construction Project Delivery

Directory of Open Access Journals (Sweden)

Sungmin Yun

2017-06-01

Full Text Available Despite the efforts for sustainability studies in building and infrastructure construction, the sustainability issues in industrial construction remain understudied. Further, few studies evaluate sustainability and benchmark sustainability issues in industrial construction from a management perspective. This study presents a phase-based benchmarking framework for evaluating sustainability practices use focusing on industrial facilities project. Based on the framework, this study quantifies and assesses sustainability practices use, and further sorts the results by project phase and major project characteristics, including project type, project nature, and project delivery method. The results show that sustainability practices were implemented higher in the construction and startup phases relative to other phases, with a very broad range. An assessment by project type and project nature showed significant differences in sustainability practices use, but no significant difference in practices use by project delivery method. This study contributes to providing a benchmarking method for sustainability practices in industrial facilities projects at the project phase level. This study also discusses and provides an application of phase-based benchmarking for sustainability in industrial construction.

Accounting and Co-constructing: The Development of a Standard for Electronic Health Records

DEFF Research Database (Denmark)

Bossen, Claus

2011-01-01

care services, cooperation between staff and make patient records immediately and accessible to distributed actors. Investments also have the aims of making health care services more accountable, integrated and increase quality and efficiency. This paper analyses a Danish national standard...... for electronic health records on the basis of an application prototype test build on that standard. The analysis shows that inscribed in the standard is an ambition to make staff and health care services more accountable at the cost of more work, loss of overview and fragmentation of patient cases. Significantly......, despite the standard having been conceived and developed in a process of co-construction with clinicians, clinicians did not find it adequate for their work. The analysis argues this was the result of the model of work embedded in the standard coming from a stance from without practice. Subsequently...

Knowledge Management Practice on Construction Project ...

African Journals Online (AJOL)

Likewise, the results further indicated 19 benefits of KM practice for improving construction project performance and include: improve project quality, cost and time; practice and process improvement; encourage effective teamwork and innovation; improve the client satisfaction; boost productivity of employees and processes; ...

National and International Standardization (International Organization for Standardization and European Committee for Standardization Relevant for Sustainability in Construction

Directory of Open Access Journals (Sweden)

Renata Morbiducci

2010-12-01

Full Text Available Sustainability in construction has a short history in terms of principles, standardizations and applications. From the Brundtland Report “Our Common Future”, a new vision of the resource deficits, climate impacts and the social responsibility gave growth to the idea of sustainability also in design and construction. Consequently, in around 2000, the international and national organizations for standardization started to develop standards for the application of sustainable principles. This paper gives an overview of existing and planned standards, and examples on how to use them as a framework for the development of methods and tools for assessment.

Implementing Home Health Standards in Clinical Practice.

Science.gov (United States)

Gorski, Lisa A

2016-02-01

In 1986, the American Nurses Association (ANA) published the first Standards of Home Health Practice. Revised in 1992 and expanded in 1999 to become Home Health Nursing: Scope and Standards of Practice, it was revised in 2008 and again in 2014. In the 2014 edition, there are 6 standards of home healthcare nursing practice and 10 standards of professional performance for home healthcare nursing. The focus of this article is to describe the home healthcare standards and to provide guidance for implementation in clinical practice. It is strongly encouraged that home healthcare administrators, educators, and staff obtain a copy of the standards and fully read this essential home healthcare resource.

An Evaluation of Forest Road Standards and Road Gradients in Turkey in View of FAO Criteria and Some EU Practices

Directory of Open Access Journals (Sweden)

Sadık Çağlar

2009-04-01

Full Text Available Forest roads are one of the inevitable infrastructures in conducting forestry operations. Around 1000 km under standardized forest roads have been largely repaired in addition to construction of 1000 km new forest roads in Turkey. Implementing uniform road gradient along the road sections is very important in terms of transportation techniques and safety, as well as the geometrical standardizations of the forest road. In this study, current road standards, longitudinal gradient values and their limitations in forest road constructions recommended by Food and Agriculture Organization of the United Nations (FAO and some Europe Union (EU countries were examined. Firstly, the forest road standards and their gradient values have been defined in Turkish forest road construction practices. Afterwards, the forest road standards and the gradient values applied by FAO and some EU countries were presented, and finally, the specifications were examined by comparing them with the current practices in Turkish forestry.

Construct Validation of Content Standards for Teaching

Science.gov (United States)

van der Schaaf, Marieke F.; Stokking, Karel M.

2011-01-01

Current international demands to strengthen the teaching profession have led to an increased development and use of professional content standards. The study aims to provide insight in the construct validity of content standards by researching experts' underlying assumptions and preferences when participating in a delphi method. In three rounds 21…

Medical devices regulations, standards and practices

CERN Document Server

Ramakrishna, Seeram; Wang, Charlene

2015-01-01

Medical Devices and Regulations: Standards and Practices will shed light on the importance of regulations and standards among all stakeholders, bioengineering designers, biomaterial scientists and researchers to enable development of future medical devices. Based on the authors' practical experience, this book provides a concise, practical guide on key issues and processes in developing new medical devices to meet international regulatory requirements and standards. Provides readers with a global perspective on medical device regulationsConcise and comprehensive information on how to desig

Organizing Construction Practices in Different Cultural Contexts

DEFF Research Database (Denmark)

Thuesen, Christian; Rasmussen, Christian K. S.

2013-01-01

a number of characteristics and challenges related to the cultural context have been identified highlighting a central issue in existing and future construction practices due to the globalization and thereby increasing importance of cultural understanding in project-based organizing. The empirical findings......This paper presents in-depth case studies of construction practices with a specific focus on understanding the emergent and dynamic nature of construction management in different cultural contexts. The cases are based on actual working-experiences by the author as an assistant project manager...... participating in the construction management on site working for three different contractors in different cultural contexts: (1) Construir Futuro S.A. in Quito, Ecuador; (2) Anker Hansen & co. A/S in Copenhagen, Denmark; and (3) E. Pihl & Soen A/S in Stockholm, Sweden. Based on these explorative case studies...

Will nuclear power plant standardization reduce the licensing impact on construction

International Nuclear Information System (INIS)

Allen, J.M.; Bingham, W.G.; Keith, D.G.

1976-01-01

The NRC and the nuclear industry have been pursuing standardization quite vigorously in an effort to reduce the cost and schedule for the design and construction of nuclear power plants. The NRC is currently reviewing standard plant applications submitted under each of four standardization options. In addition, the NRC has published Standard Review Plans and Standard Technical Specifications. Although problems exist in the implementation of standardization and in areas unaffected by standardization, each of these standardization methods has the potential to reduce the licensing impact on construction

Haiyang nuclear power construction management and practice

International Nuclear Information System (INIS)

Wang Fengxue

2010-01-01

The paper introduces the basic situation of Shandong Haiyang Nuclear Power Plant, as well as the management and progress of the project. Through the construction management practice, problems encountered in nuclear power construction are put forward for peer exchange and discussion. (author)

Current practices of construction waste reduction through 3R practice among contractors in malaysia: Case study in penang

Science.gov (United States)

Ng, L. S.; Tan, L. W.; Seow, T. W.

2017-11-01

The effectiveness of the implementation of construction waste reduction through 3R reflects the sustainability in construction waste management. Weak implementation of construction waste reduction through 3R among contractors will lead to unsustainable construction waste management. Increase in construction waste on landfills is critical especially on islands where land is very limited for solid waste disposal. This aim of this paper is to investigate current practice of construction waste reduction through 3R practice among contractors in Penang, Malaysia. The findings reported herein is based on feedbacks from 143 construction contractors of grade CIDB G7, G6 and G5 in Penang and experts from Penang Local Authority, CIDB in Penang and its Headquarters, National Solid Waste Management Department, and Headquarters of Solid Waste and Public Cleansing Management Corporation. Interviews and questionnaire surveys have been found that 3R practice is not mandatory in construction waste management in Penang. Only 39.8% construction contractors practiced 3R in managing their waste. Therefore, 3R practices should be emphasized in construction industry. Reducing wastes through 3R practices in construction industry is a way forward towards sustainable construction waste management especially in expanding the lifetime of landfill.

Construction of ideas and practice for 'nuclear geology featured database'

International Nuclear Information System (INIS)

Hu Guanglin; Feng Kai

2010-01-01

East China Institute of Technology is engaged in training person in areas of Nuclear Resource exploration. It is Nuclear Featured multi-Institute of Technology. At present, our library was done several collections system, which were focusing on Uranium and Geology. The library decide to be organizational force to construct Nuclear and Geology Featured database and put into use as soon as possible. 'Nuclear Geology Featured Database' put forward for construction principles of uniqueness, standardization, completeness, practicality, security and respecting knowledge property rights. The database contains 'Map and Table', 'periodical thesis', 'dissertations', 'conference papers', newspapers', 'books', ect. The types of literatures mainly includes monographs, periodicals, dissertations, conference papers, newspapers, as well as videos. The database can get information by ways of searching titles, authors and texts, and gradually become a more authoritative Nuclear Geology Database for study. (authors)

An Overview of Total Quality Management (TQM) practice in Construction Sector

Science.gov (United States)

Likita, A. J.; Zainun, N. Y.; Rahman, I. Abdul; Awal, A. S. M. Abdul; Alias, A. R.; Rahman, M. Q. Abdul; Ghazali, F. E. Mohamed

2018-04-01

In construction sector TQM can be termed as a philosophy which guides construction professionals on the proper execution of construction projects in terms of quality. The aim of this paper is to discuss on quality management practice in construction sector. This paper evaluated five previous researches and the findings were discussed to find a conclusion of TQM practise in construction sector. The study found that TQM had been successfully practice in construction sector at Saudi Arabia, India, US and South Africa. Application of Artificial Neural Network (ANN) help to improve the implementation of TQM in construction sector. In conclusion, quality management practices will give better control of processes in construction sector.

40 CFR 63.306 - Work practice standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Work practice standards. 63.306 Section 63.306 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... for Coke Oven Batteries § 63.306 Work practice standards. (a) Work practice plan. On or before...

The Inevitability of "Standard" English: Discursive Constructions of Standard Language Ideologies

Science.gov (United States)

Davila, Bethany

2016-01-01

Although standard language ideologies have been well researched and theorized, the practices that lead to the reproduction and enactment of these ideologies deserve attention. Specifically, there remains a need to study language that both reveals reliance on standard language ideologies and perpetuates these ideologies within the field of writing…

77 FR 43018 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Science.gov (United States)

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Health Administration (OSHA), Department of Labor. ACTION: Notice of proposed rulemaking; correction. SUMMARY: OSHA is correcting a notice of proposed rulemaking (NPRM) with regard to the construction...

RECOMMENDED FOUNDATION FILL MATERIALS CONSTRUCTION STANDARD OF THE FLORIDA RADON RESEARCH PROGRAM

Science.gov (United States)

The report summarizes the technical basis for a recommended foundation fill materials standard for new construction houses in Florida. he radon-control construction standard was developed by the Florida Radon Research Program (FRRP). ill material standards are formulated for: (1)...

Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 The purpose of this practice is to provide design and construction guidelines for contamination controlled facilities used in the assembly and integration of aerospace hardware. The guidelines herein are intended to ensure that the facilities, when used properly, will meet the cleanliness requirements of aerospace hardware and processes. The objective is to limit contamination due to the deposition of particulate and molecular contaminants on flight hardware surfaces. 1.2 One cleanliness classification of a facility is the airborne particle concentrations in accordance with ISO 14644-1 and 14644-2. Airborne particle concentrations in accordance with FED-STD-209E are included for reference. This simple classification is inadequate to describe a facility that will support the assembly and integration of spacecraft. The extended duration of hardware exposure during fabrication and testing, the sensitivity of the hardware to hydrocarbons and other molecular contaminants, and the changing requirements during ...

Standards of practice for forensic mental health nurses--identifying contemporary practice.

Science.gov (United States)

Martin, Trish; Maguire, Tessa; Quinn, Chris; Ryan, Jo; Bawden, Louise; Summers, Monica

2013-01-01

Forensic mental health nursing is a recognized field of nursing in most countries. Despite a growing body of literature describing aspects of practice, no publication has been found that captures the core knowledge, skills, and attitudes of forensic mental health nurses. One group of nurses in Australia have pooled their knowledge of relevant literature and their own clinical experience and have written standards of practice for forensic mental health nursing. This paper identifies the need for standards, provides a summary of the standards of practice for forensic mental health nurses, and concludes with how these standards can be used and can articulate to others the desired and achievable level of performance in the specialty area.

Standardized Testing and the Construction of Governable Persons

Science.gov (United States)

Graham, Cameron; Neu, Dean

2004-01-01

While debates over standardized testing are ubiquitous, there has been relatively little consideration of how today's standardized testing practices have arisen. The current study provides a chronology of standardized testing within Alberta, Canada. Starting from prior work by Foucault and others on "governmentality", we propose that the…

Preliminary study on enhancing waste management best practice model in Malaysia construction industry

Science.gov (United States)

Jamaludin, Amril Hadri; Karim, Nurulzatushima Abdul; Noor, Raja Nor Husna Raja Mohd; Othman, Nurulhidayah; Malik, Sulaiman Abdul

2017-08-01

Construction waste management (CWM) is the practice of minimizing and diverting construction waste, demolition debris, and land-clearing debris from disposal and redirecting recyclable resources back into the construction process. Best practice model means best choice from the collection of other practices that was built for purpose of construction waste management. The practice model can help the contractors in minimizing waste before the construction activities will be started. The importance of minimizing wastage will have direct impact on time, cost and quality of a construction project. This paper is focusing on the preliminary study to determine the factors of waste generation in the construction sites and identify the effectiveness of existing construction waste management practice conducted in Malaysia. The paper will also include the preliminary works of planned research location, data collection method, and analysis to be done by using the Analytical Hierarchy Process (AHP) to help in developing suitable waste management best practice model that can be used in the country.

COMPARISON OF TRENDS IN RISK MANAGEMENT THEORY AND PRACTICES WITHIN THE CONSTRUCTION INDUSTRY

Directory of Open Access Journals (Sweden)

Dena Crnković

2016-12-01

Full Text Available This study considered the problem of understanding and use of risk management methods in construction projects and their representation in the literature and their practical application. Research of trends in risk management was conducted using studies from the EBSCO database that were published in the period from 1999 to 2015. The focus included the development of two terms, namely traditional and holistic approach to risk management as well as to uncertainty and opportunity management. The trend of leading standards in the field of project management, PMBoK and ISO 31000 indicated full support for the modernization of risk management that focused on the risks as well as potential opportunities in the project. The findings also revealed that the global practices continued to lack awareness of risk management and its benefits for project goals. A similar situation was found in Croatia by observing project management practices in two case studies, namely Project Zagrebačka obala in Rijeka and a Project of SEECEL Zagreb. Primarily, the lack of education and communication between experts are important issues requiring attention in practice and academics. It is necessary to gradually introduce standards over time to prepare for progress in managing uncertainties and adopting more holistic approaches.

Effectiveness of Practicing Supply Chain Management in Construction Site

Directory of Open Access Journals (Sweden)

Mamter S.

2014-01-01

Full Text Available Construction Supply chain management comprised of the network of organization involved in the different processes and activities which produce the material, components and services that come together to design, procurement and deliver a building. It also consists of different organizations involved in the construction process including client/owner, designer, contractor, subcontractor and suppliers. This paper shall present on the implementation of supply chain management in construction and the effectiveness of practicing SCM in construction site. A field study is done from the viewpoint of contractor and consultant then analysed by using average index methods and presented in a statistical analysis. From the analysis, it reveals that effectiveness of practicing the SCM give a lot of good performances and granted benefits to contractor. The statistical analysis produced first ranking effectiveness of SCM is can minimize waste of material and labor for construction project.

An appraisal of construction management practice in Nigeria | Ugwu ...

African Journals Online (AJOL)

An appraisal of construction management practice in Nigeria. ... 108 questionnaires were distributed to the key construction actors as follows: 45 to ... conflicting design information, effective co-ordination of resources, critical path method, ...

Risk pricing practices in finance, insurance and construction

OpenAIRE

Laryea, Samuel

2008-01-01

A review of current risk pricing practices in the financial, insurance and construction sectors is conducted through a comprehensive literature review. The purpose was to inform a study on risk and price in the tendering processes of contractors: specifically, how contractors take account of risk when they are calculating their bids for construction work. The reference to mainstream literature was in view of construction management research as a field of application rather than a fundamental ...

75 FR 10438 - Effluent Limitations Guidelines and Standards for the Construction and Development Point Source...

Science.gov (United States)

2010-03-08

... Effluent Limitations Guidelines and Standards for the Construction and Development Point Source Category... technology-based Effluent Limitations Guidelines and New Source Performance Standards for the Construction... technology-based Effluent Limitations Guidelines and New Source Performance Standards for the Construction...

Childcare Practices among Construction Workers in Chira Chas, Jharkhand

Science.gov (United States)

Dhar, Rajib

2012-01-01

This study aims at examining the childcare practices and issues experienced by the low-income construction workers in India. It is concerned with understanding varied aspects relating to problems that construction workers, as parents, face while bringing up their children in one of the small construction companies of eastern India, in the state of…

Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

Energy Technology Data Exchange (ETDEWEB)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

1978-06-01

The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspects were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards.

Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

International Nuclear Information System (INIS)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

1978-06-01

The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspects were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards

76 FR 8782 - Underground Construction Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2011-02-15

...] Underground Construction Standard; Extension of the Office of Management and Budget's (OMB) Approval of... Underground Construction (29 CFR 1926.800). DATES: Comments must be submitted (postmarked, sent, or received...). Seven paragraphs in the Underground Construction Standard (``the Standard''), 29 CFR 1926.800, require...

77 FR 23117 - Rigging Equipment for Material Handling Construction Standard; Correction and Technical Amendment

Science.gov (United States)

2012-04-18

... Equipment for Material Handling Construction Standard; Correction and Technical Amendment AGENCY... AND HEALTH REGULATIONS FOR CONSTRUCTION Subpart H--Materials Handling, Storage, Use, and Disposal 0 1... amendment. SUMMARY: OSHA is correcting its sling standard for construction titled ``Rigging Equipment for...

Innovative quality management practices in the Dutch construction industry

NARCIS (Netherlands)

Bossink, B.A.G.

2002-01-01

Quality management practices do support the management of strategically important innoυation processes. This conclusion is based on empirical research in the Dutch construction industry. A large-scale innovative construction project is intensively studied during a three-year period. The quality

Development of the private practice management standards for psychology.

Science.gov (United States)

Mathews, Rebecca; Stokes, David; Littlefield, Lyn; Collins, Leah

2011-01-01

This paper describes the process of developing a set of private practice management standards to support Australian psychologists and promote high quality services to the public. A review of the literature was conducted to identify management standards relevant to psychology, which were further developed in consultation with a panel of experts in psychology or in the development of standards. Forty-three psychologists in independent private practice took part in either a survey (n=22) to provide feedback on the relevance of, and their compliance with, the identified standards, or a 6-month pilot study (n=21) in which a web-based self-assessment instrument evaluating the final set of standards and performance indicators was implemented in their practice to investigate self-reported change in management procedures. The pilot study demonstrated good outcomes for practitioners when evaluation of compliance to the standards was operationalized in a self-assessment format. Study results are based on a small sample size. Nevertheless, relevance and utility of the standards was found providing an initial version of management standards that have relevance to the practice of psychology in Australia, along with a system for evaluating psychological service provision to ensure best practice in service delivery. © 2010 National Association for Healthcare Quality.

European good practice in composite floor construction

NARCIS (Netherlands)

Brekelmans, J.W.P.M.; Daniels, B.J.; Stark, J.W.B.; Darwin, David; Buckner, C.D.

1992-01-01

Previous European experience, research and design for composite slabs with profiled steel decking are discussed. Present efforts to harmonize composite slab design and good construction practice are presented. Future European developments, for the next five years, are postulated.

Literature on theory and practice on unethical practices in the construction of projects: A case of an emerging economy

Directory of Open Access Journals (Sweden)

Chipo Mellania Maseko

2017-12-01

Full Text Available The construction of projects is mostly symbolised by the extraordinary levels of unethical practices and this has ruined the image of the industry. The delivery of good quality infrastructure projects in some emerging economies is continuously, disrupted because of unethical practices. This paper was, initiated to identify the most dominant unethical practices in the construction of projects, using most recent and comprehensive literature ranging from 2011 to 2017. Twenty unethical practices in the construction of projects were, identified. From this, the study observed that the most dominant unethical practices are corruption, bribery and collusive tendering. The least unethical practices revealed by this study are the lack of safety, overstatement of capacity and falsification of experience. Findings indicate that in order to redesign the future landscape of the industry, there is need to educate the workforce on the effects of unethical practices as well as the need to implement stronger policies. Based on these findings, further empirical studies are necessary. This article also presents recent challenges and trends of unethical behaviour that needs acknowledgement in order to assist the construction industry. In conclusion, this study proposes twelve possible solutions that could assist the construction community in the reduction of unethical practices

10 CFR 4.128 - New construction.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false New construction. 4.128 Section 4.128 Energy NUCLEAR... 1973, as Amended Discriminatory Practices § 4.128 New construction. (a) Design, construction, and... Federal Accessibility Standards. (1) Effective as of January 18, 1991, design, construction, or alteration...

Narrating practice: reflective accounts and the textual construction of reality.

Science.gov (United States)

Taylor, Carolyn

2003-05-01

Two approaches dominate current thinking in health and welfare: evidence-based practice and reflective practice. Whilst there is debate about the merits of evidence-based practice, reflective practice is generally accepted with critical debate as an important educational tool. Where critique does exist it tends to adopt a Foucauldian approach, focusing on the surveillance and self-regulatory aspects of reflective practice. This article acknowledges the critical purchase on the concept of reflective practice offered by Foucauldian approaches but argues that microsociological and discourse analytic approaches can further illuminate the subject and thus serve as a complement to them. The claims of proponents of reflective practice are explored, in opposition to the technical-rational approach of evidence-based practice. Reflective practice tends to adopt a naive or romantic realist position and fails to acknowledge the ways in which reflective accounts construct the world of practice. Microsociological approaches can help us to understand reflective accounts as examples of case-talk, constructed in a narrative form in the same way as case records and presentations.

78 FR 77334 - Small Business Size Standards: Construction

Science.gov (United States)

2013-12-23

... enrollment in the System of Award Management's (SAM) Dynamic Small Business Search database, and more firms... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG37 Small Business Size Standards: Construction AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small...

How Standards Enable the Emergence of Sustainable Construction as a New Organizational Field

DEFF Research Database (Denmark)

Boxenbaum, Eva; Georg, Susse; Reijonen, Satu

This paper examines the role of standards in the emergence of new fields. We analyzed the current formation of sustainable construction as a new field within the Danish construction sector. Data were derived from four qualitative studies on mandatory and voluntary standards pertaining to sustaina...

Practices around Customization of Standard Systems

DEFF Research Database (Denmark)

Dittrich, Yvonne; Vaucouleur, Sebastien

2008-01-01

More and more software systems are developed by customizing a standard product that provide the major part of the functionality. The customization of Enterprise Resource Planning systems is such a product based software development practice. Little empirical research on the specificities...... of these software development practices is available. We present an empirical study on customization practices based on video recordings, interviews and a survey. The observed and reported practices challenge some of the principles of software engineering. Based on the analysis, we discuss the specificity...

7 CFR 205.271 - Facility pest management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Facility pest management practice standard. 205.271... Requirements § 205.271 Facility pest management practice standard. (a) The producer or handler of an organic facility must use management practices to prevent pests, including but not limited to: (1) Removal of pest...

Nuclear reactors' construction costs: The role of lead-time, standardization and technological progress

International Nuclear Information System (INIS)

Berthélemy, Michel; Escobar Rangel, Lina

2015-01-01

This paper provides an econometric analysis of nuclear reactor construction costs in France and the United States based on overnight costs data. We build a simultaneous system of equations for overnight costs and construction time (lead-time) to control for endogeneity, using change in expected electricity demand as instrument. We argue that the construction of nuclear reactors can benefit from standardization gains through two channels. First, short term coordination benefits can arise when the diversity of nuclear reactors' designs under construction is low. Second, long term benefits can occur due to learning spillovers from past constructions of similar reactors. We find that construction costs benefit directly from learning spillovers but that these spillovers are only significant for nuclear models built by the same Architect–Engineer. In addition, we show that the standardization of nuclear reactors under construction has an indirect and positive effect on construction costs through a reduction in lead-time, the latter being one of the main drivers of construction costs. Conversely, we also explore the possibility of learning by searching and find that, contrary to other energy technologies, innovation leads to construction costs increases. -- Highlights: •This paper analyses the determinants of nuclear reactors construction costs and lead-time. •We study short term (coordination gains) and long term (learning by doing) benefits of standardization in France and the US. •Results show that standardization of nuclear programs is a key factor for reducing construction costs. •We also suggest that technological progress has contributed to construction costs escalation

Standardizing the practice of human reliability analysis

International Nuclear Information System (INIS)

Hallbert, B.P.

1993-01-01

The practice of human reliability analysis (HRA) within the nuclear industry varies greatly in terms of posited mechanisms that shape human performance, methods of characterizing and analytically modeling human behavior, and the techniques that are employed to estimate the frequency with which human error occurs. This variation has been a source of contention among HRA practitioners regarding the validity of results obtained from different HRA methods. It has also resulted in attempts to develop standard methods and procedures for conducting HRAs. For many of the same reasons, the practice of HRA has not been standardized or has been standardized only to the extent that individual analysts have developed heuristics and consistent approaches in their practice of HRA. From the standpoint of consumers and regulators, this has resulted in a lack of clear acceptance criteria for the assumptions, modeling, and quantification of human errors in probabilistic risk assessments

Practical aspects on a Marx generator construction

International Nuclear Information System (INIS)

Diniz, R.; Sudano, J.P.

1991-01-01

The practical aspects of Marx generator construction has been studied. The problems and the ways to solve them are related, once the tests with the Marx generator will continue until the specification with the 16 capacitors. (L.C.J.A.). 7 refs, 6 figs

The Role of Construct Maps in Standard Setting

Science.gov (United States)

Kane, Michael T.; Tannenbaum, Richard J.

2013-01-01

The authors observe in this commentary that construct maps can help standard-setting panels to make realistic and internally consistent recommendations for performance-level descriptions (PLDs) and cut-scores, but the benefits may not be realized if policymakers do not fully understand the rationale for the recommendations provided by the…

Textual complexity of standard conditions used in the construction industry

Directory of Open Access Journals (Sweden)

Raufdeen Rameezdeen

2013-03-01

Full Text Available Clearly written communication aids the understanding of construction contracts, resulting in less disputation. Past research, using opinion surveys rather than objective criteria, shows that construction contracts lack clarity and standard forms have become complex over time. The study outlined in this paper uses three objective measures of clarity developed by linguists to establish the readability of construction contracts. In addition, thirty industry professionals participated in a Cloze Test which measured the level of comprehension of clauses concerning disputes. The study verifies that contract conditions are very difficult to read, with college level reading skills needed to comprehend half of the clauses. However, the hypothesis that standard forms have become complex over time was not supported by the study. The study establishes a linear relationship between readability and comprehension, proving the hypothesis that improved readability increases the comprehension of a contract clause. 

Textual complexity of standard conditions used in the construction industry

Directory of Open Access Journals (Sweden)

Raufdeen Rameezdeen

2013-03-01

Full Text Available Clearly written communication aids the understanding of construction contracts, resulting in less disputation. Past research, using opinion surveys rather than objective criteria, shows that construction contracts lack clarity and standard forms have become complex over time. The study outlined in this paper uses three objective measures of clarity developed by linguists to establish the readability of construction contracts. In addition, thirty industry professionals participated in a Cloze Test which measured the level of comprehension of clauses concerning disputes. The study verifies that contract conditions are very difficult to read, with college level reading skills needed to comprehend half of the clauses. However, the hypothesis that standard forms have become complex over time was not supported by the study. The study establishes a linear relationship between readability and comprehension, proving the hypothesis that improved readability increases the comprehension of a contract clause.

The Construction Solid Waste Minimization Practices among Malaysian Contractors

Directory of Open Access Journals (Sweden)

Che Ahmad A.

2014-01-01

Full Text Available The function of minimization of construction solid waste is to reduce or eliminates the adverse impacts on the environment and to human health. Due to the increase of population that leads to rapid development, there are possibilities of construction solid waste to be increased shortly from the construction works, demolition or renovation works. Materials such as wood, concrete, paint, brick, roofing, tiles, plastic and any other materials would contribute problem involving construction solid waste. Therefore, the proper waste minimization is needed to control the quantity of construction solid waste produced. This paper identifies the type of construction solid waste produced and discusses the waste minimization practice by the contractors at construction sites in Selangor, Kuala Lumpur and Putrajaya, Malaysia.

Regulatory practices and safety standards for nuclear power plants

International Nuclear Information System (INIS)

1989-01-01

The International Symposium on Regulatory Practices and Safety Standards for Nuclear Power Plants was jointly organized by the International Atomic Energy Agency (IAEA), for Nuclear Energy Agency of the OECD and the Government of the Federal Republic of Germany with the objective of providing an international forum for the exchange of information on regulatory practices and safety standards for nuclear power plants. The Symposium was held in Munich, Federal Republic of Germany, from 7 to 10 November 1988. It was attended by 201 experts from some 32 Member States and 4 international organizations. Fifty-one papers from 19 Member States and 2 international organizations were presented and discussed in 5 technical sessions covering the following subjects: National Regulatory Practices and Safety Standards (14 papers); Implementation of Regulatory Practices - Technical Issues (8 papers); Implementation of Regulatory Practices - Operational Aspects (8 papers); Developments and Trends in Safety Standards and Practices (11 papers); International Aspects (10 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

The Role of Problem Solving in Construction Management Practices

DEFF Research Database (Denmark)

Schultz, Casper Siebken

2012-01-01

industry. An Industrial PhD carried out at a large Danish contractor examined how failures and defects are produced and handled in the social practices of construction projects. The study addresses quality issues related to project management and examines the role of problem solving practices......Quality issues are a topic of continuous interest in the Danish construction industry. Not only can failures and defects be vital to the success of the single project but also the annual profits of the whole company can be put at risk. Moreover quality issues jeopardize the reputation of the entire......-dispositions regarding quality issues in the decision making and redressing of defects and failures in the processes. The role of problem solving and trouble-shooting is analysed through the well-organized processes of erecting the precast concrete structure and the chaotic processes of constructing the penthouse storey...

Literature on theory and practice on unethical practices in the construction of projects: A case of an emerging economy

OpenAIRE

Chipo Mellania Maseko

2017-01-01

The construction of projects is mostly symbolised by the extraordinary levels of unethical practices and this has ruined the image of the industry. The delivery of good quality infrastructure projects in some emerging economies is continuously, disrupted because of unethical practices. This paper was, initiated to identify the most dominant unethical practices in the construction of projects, using most recent and comprehensive literature ranging from 2011 to 2017. Twenty unethical practices ...

Good Practice Standards – a Regulation Tool

DEFF Research Database (Denmark)

Sørensen, Marie Jull

2013-01-01

The purpose of this article is to identify the considerations weighed in regulation with good practice standards. In this article, potential due process problems with regulation via legal standards are identified and compared to other considerations, which this regulation technique meets....

Lessons learned from standardized plant design and construction

International Nuclear Information System (INIS)

Roche, B.

1999-01-01

Following France's hydropower program, Electricite de France began producing electricity with nuclear power during the 60s with units that were all different. In the early 70s, EDF launched an extensive nuclear program which was fueled by the 1973 oil crisis. The particularity of this program is based on the standardization of the design which enables the cost of engineering studies, components and construction to be reduced. As all of the sites presented various conditions, a single design was possible except for the heat sink, connection to the grid and foundations. In order to follow technical progress, the program was divided into several homogeneous series: CP0, CP1 and CP2 for 900 MWe reactors, P4 and P'4 for 1300 MWe reactors and N4 for 1450 MWe reactors. EDF has managed to apply standardization throughout the service life of the plant: all units of the same series are modified in the same manner and with a same batch of modifications. The standardization of operations is also the EDF's rule: technical specifications, safety reports, and safety procedures are normally the same for units belonging to the same series. Nevertheless, when plant design and operations, and heavy maintenance are considered, it becomes increasingly difficult to maintain strict standardization across the board: when examined closely, variations are possible-as regards the chemical specifications of the secondary system, for instance. On the other hand, at the fabrication stage, it is difficult to maintain fabrication procedures and alloy compositions rigorously the same. Standardization offers a tremendous advantage representing 30-40% of construction costs. The main drawback is the risk of generic defects. On the other hand, the risk is rather small owing to the small differences among units. (author)

Standard Practice for Visual Inspections of Photovoltaic Modules

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice covers procedures and criteria for visual inspections of photovoltaic modules. 1.2 Visual inspections of photovoltaic modules are normally performed before and after modules have been subjected to environmental, electrical, or mechanical stress testing, such as thermal cycling, humidity-freeze cycling, damp heat exposure, ultraviolet exposure, mechanical loading, hail impact testing, outdoor exposure, or other stress testing that may be part of photovoltaic module testing sequence. 1.3 This practice does not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of this practice. 1.4 There is no similar or equivalent ISO standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Semi-automatic construction of reference standards for evaluation of image registration

NARCIS (Netherlands)

Murphy, K.; Ginneken, van B.; Klein, S.; Staring, M.; Hoop, de B.J.; Viergever, M.A.; Pluim, J.P.W.

2011-01-01

Quantitative evaluation of image registration algorithms is a difficult and under-addressed issue due to the lack of a reference standard in most registration problems. In this work a method is presented whereby detailed reference standard data may be constructed in an efficient semi-automatic

Toward a constructive physics

International Nuclear Information System (INIS)

Noyes, H.P.; Gefwert, C.; Manthey, M.J.

1983-06-01

We argue that the discretization of physics which has occurred thanks to the advent of quantum mechanics has replaced the continuum standards of time, length and mass which brought physics to maturity by counting. The (arbitrary in the sense of conventional dimensional analysis) standards have been replaced by three dimensional constants: the limiting velocity c, the unit of action h, and either a reference mass (eg m/sub p/) or a coupling constant (eg G related to the mass scale by hc/(2πGm/sub p/ 2 ) approx. = 1.7 x 10 38 ). Once these physical and experimental reference standards are accepted, the conventional approach is to connect physics to mathematics by means of dimensionless ratios. But these standards now rest on counting rather than ratios, and allow us to think of a fourth dimensionless mathematical concept, which is counting integers. According to constructive mathematics, counting has to be understood before engaging in the practice of mathematics in order to avoid redundancy. In its strict form constructive mathematics allows no completed infinities, and must provide finite algorithms for the computation of any acceptable concept. This finite requirement in constructive mathematics is in keeping with the practice of physics when that practice is restricted to hypotheses which are testable in a finite time. In this paper we attempt to outline a program for physics which will meet these rigid criteria while preserving, in so far as possible, the successes that conventional physics has already achieved

Toward a constructive physics

Energy Technology Data Exchange (ETDEWEB)

Noyes, H.P.; Gefwert, C.; Manthey, M.J.

1983-06-01

We argue that the discretization of physics which has occurred thanks to the advent of quantum mechanics has replaced the continuum standards of time, length and mass which brought physics to maturity by counting. The (arbitrary in the sense of conventional dimensional analysis) standards have been replaced by three dimensional constants: the limiting velocity c, the unit of action h, and either a reference mass (eg m/sub p/) or a coupling constant (eg G related to the mass scale by hc/(2..pi..Gm/sub p//sup 2/) approx. = 1.7 x 10/sup 38/). Once these physical and experimental reference standards are accepted, the conventional approach is to connect physics to mathematics by means of dimensionless ratios. But these standards now rest on counting rather than ratios, and allow us to think of a fourth dimensionless mathematical concept, which is counting integers. According to constructive mathematics, counting has to be understood before engaging in the practice of mathematics in order to avoid redundancy. In its strict form constructive mathematics allows no completed infinities, and must provide finite algorithms for the computation of any acceptable concept. This finite requirement in constructive mathematics is in keeping with the practice of physics when that practice is restricted to hypotheses which are testable in a finite time. In this paper we attempt to outline a program for physics which will meet these rigid criteria while preserving, in so far as possible, the successes that conventional physics has already achieved.

Management of climatic heat stress risk in construction: a review of practices, methodologies, and future research.

Science.gov (United States)

Rowlinson, Steve; Yunyanjia, Andrea; Li, Baizhan; Chuanjingju, Carrie

2014-05-01

Climatic heat stress leads to accidents on construction sites brought about by a range of human factors emanating from heat induced illness, and fatigue leading to impaired capability, physical and mental. It is an occupational characteristic of construction work in many climates and the authors take the approach of re-engineering the whole safety management system rather than focusing on incremental improvement, which is current management practice in the construction industry. From a scientific viewpoint, climatic heat stress is determined by six key factors: (1) air temperature, (2) humidity, (3) radiant heat, and (4) wind speed indicating the environment, (5) metabolic heat generated by physical activities, and (6) "clothing effect" that moderates the heat exchange between the body and the environment. By making use of existing heat stress indices and heat stress management processes, heat stress risk on construction sites can be managed in three ways: (1) control of environmental heat stress exposure through use of an action-triggering threshold system, (2) control of continuous work time (CWT, referred by maximum allowable exposure duration) with mandatory work-rest regimens, and (3) enabling self-paced working through empowerment of employees. Existing heat stress practices and methodologies are critically reviewed and the authors propose a three-level methodology for an action-triggering, localized, simplified threshold system to facilitate effective decisions by frontline supervisors. The authors point out the need for "regional based" heat stress management practices that reflect unique climatic conditions, working practices and acclimatization propensity by local workers indifferent geographic regions. The authors set out the case for regional, rather than international, standards that account for this uniqueness and which are derived from site-based rather than laboratory-based research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ethical and professional standards compliance among practicing ...

African Journals Online (AJOL)

This study investigated ethical and professional standards compliance among practicing librariansin university libraries in Benue State. The purpose of the study was todetermine the extent to which librarians in university libraries comply with ethics and professional standards in librarianship. The study adopted a descriptive ...

77 FR 42988 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Science.gov (United States)

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Administration (OSHA), Department of Labor. ACTION: Direct final rule; correction. SUMMARY: OSHA is correcting a... confusion resulting from a drafting error. OSHA published the DFR on June 22, 2012 (77 FR 37587). OSHA also...

Alternate performance standard project: Interpreting the post-construction test

International Nuclear Information System (INIS)

Williamson, A.D.; McDonough, S.E.

1993-01-01

The paper describes the results of a project commissioned by the State of Florida, in cooperation with the US Environmental Protection Agency, as one portion of the Florida Radon Research Program (FRRP). The purpose of the FRRP is to provide technical support for a statewide Building Standard for Radon-Resistant Construction currently in the rulemaking process. In this case the information provides technical background for a post-construction radon test specified as a performance element of the code which accompanies the prescriptive alternative that does not incorporate active radon reduction systems

Position paper on standardization

International Nuclear Information System (INIS)

1991-04-01

The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

Determining the essential skill requirements for construction managers' practice in Nigeria

Directory of Open Access Journals (Sweden)

Olabode E Ogunsanmi

2016-12-01

Full Text Available The study investigates the essential skill requirements for construction managers in Nigeria. The objective is to determine the most important skill requirements for construction managers. A structured questionnaire was administered to construction professionals who worked recently with construction managers in their recently completed projects. Snowballing sampling technique was used to select seventy (70 respondents, however only forty (40 responses were used for the data analysis. The results indicate that essential skills required by the construction managers for their jobs include: procedural-industrial skills, quality assurance/management, listening skills, knowledge of codes and regulations, sustainable skills and ability to learn skills. These skills are important for the construction manager to practice effectively in Nigeria and other developing countries. These findings have seven practical implications to professional bodies, Universities and other trainers of construction managers, whose present curricula may be deficient in knowledge areas in industry (business, managerial, personal and technical. These institutions may need to re-orientate and improve the curricula for newly trained construction managers to cope with current skill requirements. On the other hand, recruiting agencies should ensure that job applicants with the right hard and soft skills are engaged as construction managers. Consequently efficient and effective management of future construction projects in Nigeria and other developing countries can be ensured.

Adapting Bioretention Construction Details to Local Practices in Finland

Directory of Open Access Journals (Sweden)

Outi Tahvonen

2018-01-01

Full Text Available Bioretention is a method of storm water management that includes several processes following the natural hydrological cycle. Bioretention, or variations of it, include rain gardens and bioswales, infiltrates, filtrates, evapotranspirates, and help to store and manage storm water run-off. A bioretention cell retains water, removes pollutants, and provides water elements for urban green areas. Although bioretention is a promising method for multifunctional storm water management, its construction details should not be copied from other climatic areas. A direct application may dismiss local conditions, materials, and construction practices. This study aimed to adapt construction details for bioretention to Finnish local practices and conditions and to formulate bioretention constructions that balance water, soil, and vegetation. First, construction details were reviewed, then local adaptations were applied, and finally, the application and two variations of growing media in two construction depths were tested in a test field in Southern Finland. Sandy growing media allowed the efficient retention of water during the first year, but failed to provide vital growth. The use of topsoil and compost in the growing media improved growth, but held high electrical conductivity after infiltration. All the experimental cells in the test field showed activity during the melting periods, both during winter and spring. If bioretention plays a multifunctional role in urban design and engineered ecology, the design parameters should not only focus on storm water quantity, but also on quality management and vegetation growth.

Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers general requirements for the establishment and maintenance of a quality management system for agencies engaged in nondestructive testing (NDT). 1.2 This practice utilizes criteria contained in Practice E 543. 1.3 This practice utilizes criteria contained in American National Standard ANSI/ISO/ASQ Q9001–2000, Quality management systems—Requirements. 1.4 This practice recognizes the importance of establishing minimum safety criteria. 1.5 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard. 1.6 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

An exploratory study of the influence of national and state standards on middle school science teachers' classroom assessment practices

Science.gov (United States)

McWaters, Kathy Jean

2001-07-01

Classroom assessment practices of middle school science teachers were identified and the influence of national and state science standards on these practices was examined. In Phase I of this study a mail questionnaire was sent to 450 middle school (grades 5,6,7 and 8) science teachers in 17 parishes in Louisiana to obtain information about their classroom assessment practices. In Phase II, nine middle school teachers in eight departmentalized classrooms, two classes at each grade, participated in a qualitative study. Data were collected through questionnaires, classroom observations, interviews and document analysis. Data analysis revealed three major categories of classroom assessment targets: (a) student achievement, (b) student attitudes and, (c) student products. Results indicated that most teachers are using different assessment methods when assessing different achievement targets, as recommended by science reform documents. It was also determined that many teachers are using appropriate methods to assess student learning. While teachers reported that students spend an inordinate amount of time engaged in assessment activities, classroom observations suggested that the activities were not always written tests or graded activities. Another key finding is that there is a disconnect between the quality of teaching and the quality of assessment. Teachers who teach the material recommended by science reform documents and use recommended instructional strategies were observed to stop teaching and engage students in a "test rehearsal" geared towards rote memorization of factual information. Data suggest that the national and state science content standards are influencing the content and the format of teacher-made tests. Teachers' reported using the standards during assessment construction or selection in a wide variety of ways. The most direct use of the standards reported was to select content, format and cognitive level for test items. A more circumspect approach

INACSL Standards of Best Practice for Simulation: Past, Present, and Future.

Science.gov (United States)

Sittner, Barbara J; Aebersold, Michelle L; Paige, Jane B; Graham, Leslie L M; Schram, Andrea Parsons; Decker, Sharon I; Lioce, Lori

2015-01-01

To describe the historical evolution of the International Nursing Association for Clinical Simulation and Learning's (INACSL) Standards of Best Practice: Simulation. The establishment of simulation standards began as a concerted effort by the INACSL Board of Directors in 2010 to provide best practices to design, conduct, and evaluate simulation activities in order to advance the science of simulation as a teaching methodology. A comprehensive review of the evolution of INACSL Standards of Best Practice: Simulation was conducted using journal publications, the INACSL website, INACSL member survey, and reports from members of the INACSL Standards Committee. The initial seven standards, published in 2011, were reviewed and revised in 2013. Two new standards were published in 2015. The standards will continue to evolve as the science of simulation advances. As the use of simulation-based experiences increases, the INACSL Standards of Best Practice: Simulation are foundational to standardizing language, behaviors, and curricular design for facilitators and learners.

7 CFR 28.123 - Costs of practical forms of cotton standards.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Costs of practical forms of cotton standards. 28.123 Section 28.123 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD...

Development of a Framework for Attracting and Retaining Women in Construction Practice

Directory of Open Access Journals (Sweden)

K.J. Adogbo

2015-01-01

Full Text Available Previous research has indicated that women are significantly under-represented in the Nigerian construction industry and that female undergraduates face barriers that deter them from engaging in construction practice. This research examined the barriers faced by female undergraduates in the construction disciplines at Nigerian Universities. The research adopted the use of a questionnaire and semi-structured interviews. A total of 360 questionnaires were distributed, and 259 (71.94% were returned and used in the analysis. The semi-structured interviews were conducted with 50 female students and 16 women across the professions of Architecture, Building, Civil Engineering and Quantity Surveying. The results revealed that the undergraduates perceived the construction practice to be synonymous with site activities and that family responsibility posed the greatest barrier to their participation. The strategies identified by the women in practice included active participation in the activity of professional bodies and seeking a mentor. It was concluded that female graduates can be attracted to the industry, but efforts need to be put in place to successfully implement the strategies identified by the professional women. A framework that addresses gender issues in attracting and retaining graduates in the construction practice was developed to help women plan their career in the industry.

Green Roofs: Standardization and Quality Control of Processes in Green Construction

Directory of Open Access Journals (Sweden)

Korol Elena

2017-01-01

Full Text Available The article considers the problems of standardization and quality control of processes in the construction, improvement of integrated safety of buildings and the implementation of innovative green building technologies, the use of national standards as well as international rating systems for green buildings evaluation. This is one of the priority directions in development of the modern construction. The aim of this study is the analysis of the green roof systems and international standards, which were carried out in the green building industry. The authors have studied traditional and innovative solutions of rational using natural resources and energy, the green roof system with integration of supported solar and wind energy collecting and converting devices and of irrigation system. Some studies provide evidence for the benefits of the modular green roof system in urban green space with microclimate differences. This article presents a new research which advances our knowledge of the economic and environmental services provided by the green roof system. Research reported here also considers the analysis of the Russian and international legislation of the quality control of processes in green construction.

A Global Review of Sustainable Construction Project Financing: Policies, Practices, and Research Efforts

Directory of Open Access Journals (Sweden)

Ming Shan

2017-12-01

Full Text Available Despite the increasing investment in sustainable development over the past decade, a systematic review of sustainable construction project financing is lacking. The objectives of this paper are to conduct a systematic review to examine the policies, practices, and research efforts in the area of sustainable construction project financing, and to explore the potential opportunities for the future research. To achieve these goals, this paper first reviewed the sustainable construction project financing practices implemented by four representative developed economies including the United Kingdom, the United States, Singapore, and Australia. Then, this paper reviewed the efforts and initiatives launched by three international organizations including the United Nations, the Organization for Economic Co-operation and Development, and International Finance Corporation. After that, this paper reviewed the research efforts of sustainable construction project financing published in peer-review journals and books. This paper identified four major research themes within this area, which are the review of financial stakeholders and market of sustainable construction, benefits and barriers to sustainable construction project financing, financial vehicles for sustainable construction projects, innovative models and mechanisms for sustainable construction project financing. Additionally, this paper revealed five directions for the future research of sustainable construction project financing, which are the identification of financial issues in sustainable construction projects, the investigation of financial vehicles for sustainable construction projects in terms of their strengths, limitations, and performances, the examination of critical drivers for implementing sustainable construction project financing, the development of a knowledge-based decision support system for implementing sustainable construction financing, and the development of best practices for

Ontology construction and application in practice case study of health tourism in Thailand.

Science.gov (United States)

Chantrapornchai, Chantana; Choksuchat, Chidchanok

2016-01-01

Ontology is one of the key components in semantic webs. It contains the core knowledge for an effective search. However, building ontology requires the carefully-collected knowledge which is very domain-sensitive. In this work, we present the practice of ontology construction for a case study of health tourism in Thailand. The whole process follows the METHONTOLOGY approach, which consists of phases: information gathering, corpus study, ontology engineering, evaluation, publishing, and the application construction. Different sources of data such as structure web documents like HTML and other documents are acquired in the information gathering process. The tourism corpora from various tourism texts and standards are explored. The ontology is evaluated in two aspects: automatic reasoning using Pellet, and RacerPro, and the questionnaires, used to evaluate by experts of the domains: tourism domain experts and ontology experts. The ontology usability is demonstrated via the semantic web application and via example axioms. The developed ontology is actually the first health tourism ontology in Thailand with the published application.

76 FR 70166 - Electrical Standards for Construction and General Industry; Extension of the Office of Management...

Science.gov (United States)

2011-11-10

...] Electrical Standards for Construction and General Industry; Extension of the Office of Management and Budget... contained in the Electrical Standards for Construction (29 CFR part 1926, Subpart K) and for General... maintenance of electric utilization equipment that prevent death and serious injuries among construction and...

Standard practice for determining rail-to-Earth resistance

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This practice covers the procedures necessary to follow for measuring resistance-to-earth of the running rails which are used as the conductors for returning the train operating current to the substation in electric mass transit systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Development of standard practice guidelines for open and closed system suctioning.

Science.gov (United States)

Özden, Dilek; Görgülü, R Selma

2012-05-01

This study was carried out to determine the knowledge and practice of nurses before and after training and the development of standard practice guidelines for open and closed system suctioning methods in patients with endotracheal tubes. Many life-threatening complications can occur when a suctioning procedure is not performed with the correct technique. It has been reported that standard practice guidelines for suctioning are insufficient in clinical practice. Non-participant structured observational study. We assessed a total of 48 nurses who were employed in the cardiovascular surgery intensive care unit of a state hospital in Turkey. We used a questionnaire and nurse observation forms to assess the use of the open and closed system suctioning. There was a significant difference between the mean scores of the answers ('true', 'wrong' and 'I do not know') for the use of open and closed system suctioning before and after training. In addition, all steps of both suctioning procedures were carried out correctly during the third observation. The compliance of the nurses to the standard practice guidelines for open and closed suctioning and their knowledge levels on the subject were increased after training, while the implementation of standards was satisfactory. The development of open and closed system suctioning standard practice guidelines directly contributed to the enhancement of patient safety and the quality of nursing care. It is suggested that, as in other nursing care practices, suctioning should be carried out in accordance with standard practice guidelines, and health institutions should develop their standard practice guidelines and work in accordance with them. © 2012 Blackwell Publishing Ltd.

Gendered Communities of Practice and the Construction of Masculinities in Turkish Physical Education

Science.gov (United States)

Atencio, Matthew; Koca, Canan

2011-01-01

This paper analyses the construction of masculinities in Turkish physical education through Carrie Paechter's conceptualisation of gendered communities of practice. According to Paechter, educational communities of practice operate as sites of gendered activity. Membership within these communities contributes to the construction of a gendered…

Practical application of standards in special libraries

Directory of Open Access Journals (Sweden)

Nada Češnovar

1998-01-01

Full Text Available Special libraries in Slovenia represent an important part of information infrastructure.They operate in the spheres of economy, culture, politics, health, and others.Although they perform an important role in the process of professional training of the employees they are too often set aside.Our government is undoubtedly aware of the deficiency of normative regulation in these areas; however, passing of certain acts is often delayed because there is no direct damage to the state itself if they are not passed. New standards for special libraries regulating their operation have been prepared. Their practical application will be tested in practice. Several years of experience as a counsellor to special libraries enable the author an insight into the use of standards. Standards are certainly an indispensable "reading" for special libraries although they are certainly not perfect.

JSME construction standard for superconducting magnets of fusion facilities. Toward the construction of ITER

International Nuclear Information System (INIS)

Nakasone, Yuji; Takahashi, Yukio; Sato, Kazuyoshi; Nishimura, Arata; Suzuki, Tetsuya; Irie, Hirosada; Nakahira, Masataka

2009-01-01

The present paper describes the general view of the construction standard, which the Japan Society of Mechanical Engineers (JSME) has recently set up and published, for superconducting magnet structures to be used in nuclear fusion facilities. The present target of the standard is tokamak-type fusion energy facilities, especially the International Thermonuclear Experimental Reactor called ITER for short. The standard contains rules for structural materials including cryogenic materials, structural design considering magnetic forces, manufacture including welding and installation, nondestructive testing, pressure proof tests and leak tests of toroidal field magnet structures. The standard covers requirements for structural integrity, deformation control, and leak tightness of all the components of the superconducting magnets and their supports except for superconducting strands and electrical insulators. The standard does not cover deterioration, which may occur in service as a result of corrosion, radiation effects, or instability of material. The standard consists of seven articles and twelve mandatory and non-mandatory appendices to the articles; i.e., (1) Scope, roles and responsibilities, (2) Materials, (3) Structural design, (4) Fabrication and installation, (5) Non-destructive examination, (6) Pressure and leak testing, and (7) Terms used in general requirements. (author)

Best Practice of Construction Waste Management and Minimization

Directory of Open Access Journals (Sweden)

Khor Jie Cheng

2014-07-01

Full Text Available Material management is an important issue as seen in construction waste management. Best practice of material management is accompanied by various benefits which are acknowledged by several studies. The site layout has particular effects on both materials and their waste through effective waste management practice. Ignoring the benefits of material management could result in a daily reduction in productivity of up to 40% by material wastage. Thus, the benefits of effective material management must be well comprehended for the sake of waste minimization. Another convincing fact about waste is that poor site management accounts for the largest factor of waste generation. Hence the site condition is very crucial in developing effective material management. Factors contributing to the efficiency of material management process are effective logistical management and supply chain management. The logistics system must be performing as schedule so that materials are wisely managed on-site without encountering presence of excessive materials. As materials management is closely related to logistics in construction projects, there will be delay in construction projects when materials are not delivered to site as scheduled. The management must be effective in terms of delivery, off-loading, storage, handling, on-site transportation and on-site utilization of materials.

Standard practice for modified salt spray (fog) testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers and sets forth conditions for five modifications in salt spray (fog) testing for specification purposes. These are in chronological order of their development: 1.1.1 Annex A1, acetic acid-salt spray test, continuous. 1.1.2 Annex A2, cyclic acidified salt spray test. 1.1.3 Annex A3, seawater acidified test, cyclic (SWAAT). 1.1.4 Annex A4, SO2 salt spray test, cyclic. 1.1.5 Annex A5, dilute electrolyte cyclic fog dry test. 1.2 This practice does not prescribe the type of modification, test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicabilit...

Bilingual Intertextuality: The Joint Construction of Bi-Literacy Practices between Parent and Child

Science.gov (United States)

Liu, Yu; Vadeboncoeur, Jennifer A.

2010-01-01

Based on sociocultural theory, this article examines two activities constituted by a parent and child as jointly constructed bi-literacy practices. Bi-literacy practices enable the parent and child to co-construct conceptual meanings and sense across two languages. Concept development in young children "begins" with meaning in one language and…

7 CFR 1724.52 - Permitted deviations from RUS construction standards.

Science.gov (United States)

2010-01-01

... neutrals to provide the required electric service to a consumer, the RUS standard transformer secondary... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Electric System Design § 1724.52 Permitted deviations from RUS construction...

Energy plus standard in buildings constructed by housing associations?

International Nuclear Information System (INIS)

Stutterecker, Werner; Blümel, Ernst

2012-01-01

In order to achieve national, European and international energy goals, energy efficiency strategies in the building sector have to be implemented. The passive house standard and low energy standards are already successfully established in single dwelling houses. These high performance standards are starting to penetrate into the sector of housing associations. A case study about an apartment building constructed by a housing association is presented here. It describes the monitoring concept and the results of the 1st year of monitoring. Depending on the definition of the zero energy building standard (extent of loads included in the balancing), the building could be classified as an energy plus building or as a building, which uses more energy, than is supplied by on-site generation. If the building's total energy use (including user specific loads) is defined as load, only 34.5% of these loads were provided by the net energy output of the PV system. If only the heating energy demand is defined as load, the PV system even yielded a surplus of 45.6% of the energy load. -- Highlights: ► Energy monitoring of an apartment building constructed by a housing association. ► Planned as a Passive House with a semi-central ventilation system with decentralized heat pump technology. ► Total end energy demand of the building was 43 kWh/(m² a). ► Total net energy generation by the PV system was 15 kWh/(m² a). ► Apartment no. 1: 52% of the energy demand were used for heating and ventilation.

Between queerpos and speeches: standardization of conducts, homosexualities and homophobia in the practices of School Physical Education

Directory of Open Access Journals (Sweden)

Vagner Matias do Prado

2017-05-01

Full Text Available Anchored in the queers studies, this article aims to discuss the tagging social process standardization of conducts, repudiation of homosexuality and construction of homophobia through some school practices of Physical Education. From reports generated by semi-structured interviews, it was possible to infer that, from the curriculum, sports are mobilized for the construction and maintenance of a representation of masculinity that subjugates and ranks other expressions of existence. In this relational game, students who do not fit (or will not fit to the hegemonic models are targets of constant derogatory demarcations, which aim to establish a difference that “is read” socially as “abnormal”.

Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

Science.gov (United States)

Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

2017-11-01

Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

Working out the standards for nuclear power aging management implementation (PLM Standards)

International Nuclear Information System (INIS)

Miyano, Hiroshi

2008-01-01

Background of preparation of standards, preparation of standards for development of nuclear power aging management technologies, revision of PLM (Product Lifecycle Management) standards, and problems of PLM standards are stated. The placement of social needs, scheme, the standards system, preparation of rules and standards, and practical use of them by road map are illustrated and explained. Relation between the safety regulations and examination standards, and development and preparation of standards system are outlined. The nuclear power plant aging management and the maintenance control are provided by many rules and standards. PLM standards defines the aging phenomena and extracts the measurements and reflects them on the usual maintenance flow under the long term maintenance program. New examination system constructs the usual maintenance and the maintenance based on the aging management and long term maintenance program. Outline and construction of PLM standards are explained with notes and additional books. (S.Y.)

When constructions of the future meet curriculum development and teaching practice

DEFF Research Database (Denmark)

Rasmussen, Jens

in direction of still better learning outcomes, personal development and Bildung. On the other hand the educational system’s environment such as for example the economic system, the political system or other parts of the educational system requires outcomes that meet the needs of these systems as well...... and teaching practices that are especially suited to promote such selected constructs. How are these efforts met by curriculum development and how are they met by classroom practitioners? What happens when the constructions of future meets curriculum development and teaching practice?...

Study on Oxygen Supply Standard for Physical Health of Construction Personnel of High-Altitude Tunnels

Directory of Open Access Journals (Sweden)

Chun Guo

2015-12-01

Full Text Available The low atmospheric pressure and low oxygen content in high-altitude environment have great impacts on the functions of human body. Especially for the personnel engaged in complicated physical labor such as tunnel construction, high altitude can cause a series of adverse physiological reactions, which may result in multiple high-altitude diseases and even death in severe cases. Artificial oxygen supply is required to ensure health and safety of construction personnel in hypoxic environments. However, there are no provisions for oxygen supply standard for tunnel construction personnel in high-altitude areas in current tunnel construction specifications. As a result, this paper has theoretically studied the impacts of high-altitude environment on human bodies, analyzed the relationship between labor intensity and oxygen consumption in high-altitude areas and determined the critical oxygen-supply altitude values for tunnel construction based on two different standard evaluation systems, i.e., variation of air density and equivalent PIO2. In addition, it has finally determined the oxygen supply standard for construction personnel in high-altitude areas based on the relationship between construction labor intensity and oxygen consumption.

A study of best management practices for enhancing productivity in building projects: construction methods perspectives

OpenAIRE

Gurmu, Argaw Tarekegn; Aibinu, Ajibade Ayodeji; Chan, Toong Khuan

2016-01-01

This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry...

Nuclear reactors' construction costs: The role of lead-time, standardization and technological progress

International Nuclear Information System (INIS)

Berthelemy, Michel; Escobar Rangel, Lina

2013-01-01

This paper provides the first comparative analysis of nuclear reactor construction costs in France and the United States. Studying the cost of nuclear power has often been a challenge, owing to the lack of reliable data sources and heterogeneity between countries, as well as the long time horizon which requires controlling for input prices and structural changes. We build a simultaneous system of equations for overnight costs and construction time (lead-time) to control for endogeneity, using expected demand variation as an instrument. We argue that benefits from nuclear reactor program standardization can arise through short term coordination gains, when the diversity of nuclear reactors' technologies under construction is low, or through long term benefits from learning spillovers from past reactor construction experience, if those spillovers are limited to similar reactors. We find that overnight construction costs benefit directly from learning spillovers but that these spillovers are only significant for nuclear models built by the same Architect-Engineer (A- E). In addition, we show that the standardization of nuclear reactors under construction has an indirect and positive effect on construction costs through a reduction in lead-time, the latter being one of the main drivers of construction costs. Conversely, we also explore the possibility of learning by searching and find that, contrary to other energy technologies, innovation leads to construction costs increases. (authors)

Large-scale performance and design for construction activity erosion control best management practices.

Science.gov (United States)

Faucette, L B; Scholl, B; Beighley, R E; Governo, J

2009-01-01

The National Pollutant Discharge Elimination System (NPDES) Phase II requires construction activities to have erosion and sediment control best management practices (BMPs) designed and installed for site storm water management. Although BMPs are specified on storm water pollution prevention plans (SWPPPs) as part of the construction general permit (GP), there is little evidence in the research literature as to how BMPs perform or should be designed. The objectives of this study were to: (i) comparatively evaluate the performance of common construction activity erosion control BMPs under a standardized test method, (ii) evaluate the performance of compost erosion control blanket thickness, (iii) evaluate the performance of compost erosion control blankets (CECBs) on a variety of slope angles, and (iv) determine Universal Soil Loss Equation (USLE) cover management factors (C factors) for these BMPs to assist site designers and engineers. Twenty-three erosion control BMPs were evaluated using American Society of Testing and Materials (ASTM) D-6459, standard test method for determination of ECB performance in protecting hill slopes from rainfall induced erosion, on 4:1 (H:V), 3:1, and 2:1 slopes. Soil loss reduction for treatments exposed to 5 cm of rainfall on a 2:1 slope ranged from-7 to 99%. For rainfall exposure of 10 cm, treatment soil loss reduction ranged from 8 to 99%. The 2.5 and 5 cm CECBs significantly reduced erosion on slopes up to 2:1, while CECBs or= 4:1 when rainfall totals reach 5 cm. Based on the soil loss results, USLE C factors ranged from 0.01 to 0.9. These performance and design criteria should aid site planners and designers in decision-making processes.

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong.

Science.gov (United States)

Yu, Ann T W; Poon, C S; Wong, Agnes; Yip, Robin; Jaillon, Lara

2013-01-01

Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C&D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C&D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006-2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C&D waste. Copyright © 2012 Elsevier Ltd. All rights reserved.

Standard practice for ultrasonic testing of wrought products

CERN Document Server

American Society for Testing and Materials. Philadelphia

2013-01-01

1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

International Nuclear Information System (INIS)

Yu, Ann T.W.; Poon, C.S.; Wong, Agnes; Yip, Robin; Jaillon, Lara

2013-01-01

Highlights: ► A significant reduction of construction waste was achieved at the first 3 years of CWDCS implementation. ► However, the reduction cannot be sustained. ► Implementation of the CWDCS has generated positive effects in waste reduction by all main trades. - Abstract: Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C and D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C and D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006–2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C and D waste.

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

Energy Technology Data Exchange (ETDEWEB)

Yu, Ann T.W., E-mail: bsannyu@polyu.edu.hk [Department of Building and Real Estate, The Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong); Poon, C.S.; Wong, Agnes; Yip, Robin; Jaillon, Lara [Department of Civil and Structural Engineering, Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong)

2013-01-15

Highlights: Black-Right-Pointing-Pointer A significant reduction of construction waste was achieved at the first 3 years of CWDCS implementation. Black-Right-Pointing-Pointer However, the reduction cannot be sustained. Black-Right-Pointing-Pointer Implementation of the CWDCS has generated positive effects in waste reduction by all main trades. - Abstract: Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C and D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C and D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006-2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C and D waste.

Practical Realism: Against Standard Scientific Realism and Anti-Realism

Directory of Open Access Journals (Sweden)

Rein Vihalemm

2012-12-01

Full Text Available In this paper, the elaboration of the concept of practical realist philosophy of science which began in the author's previous papers is continued. It is argued that practical realism is opposed to standard scientific realism, on the one hand, and antirealism, on the other. Standard scientific realism is challengeable due to its abstract character, as being isolated from practice. It is based on a metaphysical-ontological presupposition which raises the problem of the God's Eye point of view (as it was called by Hilary Putnam. Joseph Rouse's conception of science as practice, Sami Pihlström's pragmatic realism, and even Ilkka Niiniluoto's critical scientific realism are interpreted as practical realist conceptions. Pihlström suggests that the contemporary scientific realist should be prepared to accept the pragmatically naturalized Kantian transcendental perspective on realism. It is argued, however, that this realistically naturalized Kantianism can be nothing more than practical realism, as originated by Karl Marx.

Standard practice for conducting and evaluating laboratory corrosions tests in soils

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This practice covers procedures for conducting laboratory corrosion tests in soils to evaluate the corrosive attack on engineering materials. 1.2 This practice covers specimen selection and preparation, test environments, and evaluation of test results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

The Development Standard Agreement Influences on National and International Business Practices

Directory of Open Access Journals (Sweden)

Cindawati Cindawati

2016-12-01

Full Text Available The rapidly growing business traffic either nationally or internationally forces the business practices to establish a standard agreement to secure the products and to protect the buyer from any risks. The standard agreement successfully meets the demand of international trade which urgently need the high speed and the accuracy. The objective of this research is to find out how does the development of agreement affect to the commerce practices and what are the requirements of standard agreement in accordance with the right and obligation. A qualitative method is applied in searching data of business practices. This study uses a normative research which guides the rule of law or determines some business standards and norms. The finding of this study show that the development of agreement strongly affects to the commerce practices, and standar agreement is urgently needed by business practices as a guideline to perform business traffic as smooth as buyer and seller expect, then both seller and buyer should know the three alternative way used as the procedures of standard agreement, namely; contract signing, notification document agreement, and notification by bulletin board. At last, a standard agreement could be accepted as legal agreement corresponding to willingness and trustworthy.

Private Pilot Practical Test Standards for Airplane (SEL, MEL, SES, MES)

Science.gov (United States)

1995-05-01

The Private Pilot - Airplane Practical Test Standards book has been : published by the Federal Aviation Administration (FAA) to establish the : standards for the private pilot certification practical tests for the airplane : category and the single-e...

The common core mathematics standards transforming practice through team leadership

CERN Document Server

Hull, Ted H; Balka, Don S

2012-01-01

Transform math instruction with effective CCSS leadership The Common Core State Standards for mathematics describe the "habits of mind" that teachers should develop in their students without which the content standards cannot be successfully implemented. This professional development resource helps principals and math leaders grapple with the changes that must be addressed so that teachers can implement the practices required by the CCSS. Included are: A clear explanation of the CCSS for Mathematical Practice  Techniques to help leadership teams collaboratively implement and maintain the new standards A proficiency matrix with examples of instructional strategies for helping students reach competency in each standard.

Construction and equipment requirements for installations and laboratories handling unsealed radioactive materials in low and medium activity - Proposal of an Israeli standard

Energy Technology Data Exchange (ETDEWEB)

Ben-Shlomo, A; Schlesinger, T; Barshad, M [Soreq Nuclear Research Center, Yavne (Israel)

1993-10-01

authors present in details their recommendations for construction and equipment requirements for laboratories and installations in low and medium activity in the the fields of medicine, research and industry, based on the international standards, the Israeli standards in accordance with the specific conditions working with unsealed radioactive materials in Israel and the economic and practical possibilities in the country. (translated author abstract)

78 FR 38735 - Autopsy Performance Criteria: Standards, Guidelines and Best Practices

Science.gov (United States)

2013-06-27

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1626] Autopsy Performance Criteria: Standards, Guidelines and Best Practices AGENCY: National Institute of Justice, DOJ. ACTION... entitled, ``Autopsy Performance Criteria: Standards, Guidelines and Best Practices''. The opportunity to...

On the dimensioning of steel construction considering revision of German standards

International Nuclear Information System (INIS)

Lindhorst, L.; Schaudinn, L.; Milleder, J.

2005-01-01

Different procedures for dimensioning of structural steelwork are investigated in this paper. In the non-nuclear area, there has been made a change in the design concept for structural steelwork of surface constructions in Germany and the deterministic design concept of German DIN 18800 (03/81) [1] has been replaced by the semi-probabilistic design concept of DIN 18800 (11/90) [2]. Design codes established in nuclear safety standards for steelwork in German nuclear facilities are considered in the paper. Recent revisions of German nuclear safety standards and specifications are discussed with respect to regulations concerning design codes. The change in design concept for structural steelwork (non-nuclear) has not been adopted in recent revisions of nuclear safety standards and specifications for steelwork of components with importance to safety. The deterministic concept of DIN 18800 (03/81) [1] is compared with the semi-probabilistic concept of DIN 18800 (11/90) [2]. Differences between the standards [1] and [2] are investigated using an example of a steel construction. Results for dimensioning according to DIN 18800 (03/81) [1] are compared to those for dimensioning according to DIN 18800 (11/90) [2] putting the main emphasis on stress analysis and building structure interaction loads. (authors)

Master sintering curve: A practical approach to its construction

Directory of Open Access Journals (Sweden)

Pouchly V.

2010-01-01

Full Text Available The concept of a Master Sintering Curve (MSC is a strong tool for optimizing the sintering process. However, constructing the MSC from sintering data involves complicated and time-consuming calculations. A practical method for the construction of a MSC is presented in the paper. With the help of a few dilatometric sintering experiments the newly developed software calculates the MSC and finds the optimal activation energy of a given material. The software, which also enables sintering prediction, was verified by sintering tetragonal and cubic zirconia, and alumina of two different particle sizes.

A study of best management practices for enhancing productivity in building projects: construction methods perspectives

Directory of Open Access Journals (Sweden)

Argaw Tarekegn Gurmu

2016-09-01

Full Text Available This research investigates management practices that have the potential to enhance productivity in building projects by focusing on construction methods. In phase 1 of the study, face-to-face interviews with nineteen experts were conducted to identify the best management practices for construction methods. The qualitative data analysis reached saturation and resulted in a list of best practices for construction methods that are relevant to the local industry. The second phase used an industry-wide survey to prioritize the best practices. Accordingly, project start-up plan, traffic control plan, machinery positioning strategy, project completion plan, and dynamic site layout plan were shown to be the top five best practices for construction methods. The study also revealed that high levels of implementation of best practices are associated with low levels of project delays. The use of best practices also varied according to the project costs. There were no discernible differences between the top five best practices. The authors suggest that they should be implemented jointly to improve productivity in building projects. Contractors could use the logistic regression model developed, to predict the probability of exceeding a baseline productivity factor and, on that basis, implement corrective actions to achieve the desired level of productivity.

The innovation and application of the nuclear power construction management information system MISNPC

International Nuclear Information System (INIS)

Wang Kaihua; Tang Zihui; Zhang Baiqi; Sun Guangwei; Zhu Guodong; Qian Fuhua

2009-01-01

This paper focuses on introducing the innovation achievements on the management information system of nuclear power construction (MISNPC). The innovation is achieved through summarizing the practice of nuclear power construction in China and drawing on advanced experience of international nuclear power construction. The innovation, including the management standard for nuclear power construction, the standard of construction process, the standard of nuclear-power basic codes and the standard for nuclear power construction and control, can be rapidly copied for application in various nuclear power construction projects. The application of the innovation may play an essential role in ensuring safe construction and operation of nuclear power plants in China and improving economic benefits. (authors)

Eliminating Undesirable Variation in Neonatal Practice: Balancing Standardization and Customization.

Science.gov (United States)

Balakrishnan, Maya; Raghavan, Aarti; Suresh, Gautham K

2017-09-01

Consistency of care and elimination of unnecessary and harmful variation are underemphasized aspects of health care quality. This article describes the prevalence and patterns of practice variation in health care and neonatology; discusses the potential role of standardization as a solution to eliminating wasteful and harmful practice variation, particularly when it is founded on principles of evidence-based medicine; and proposes ways to balance standardization and customization of practice to ultimately improve the quality of neonatal care. Copyright © 2017 Elsevier Inc. All rights reserved.

Critical management practices influencing on-site waste minimization in construction projects.

Science.gov (United States)

Ajayi, Saheed O; Oyedele, Lukumon O; Bilal, Muhammad; Akinade, Olugbenga O; Alaka, Hafiz A; Owolabi, Hakeem A

2017-01-01

As a result of increasing recognition of effective site management as the strategic approach for achieving the required performance in construction projects, this study seeks to identify the key site management practices that are requisite for construction waste minimization. A mixed methods approach, involving field study and survey research were used as means of data collection. After confirmation of construct validity and reliability of scale, data analysis was carried out through a combination of Kruskal-Wallis test, descriptive statistics and exploratory factor analysis. The study suggests that site management functions could significantly reduce waste generation through strict adherence to project drawings, and by ensuring fewer or no design changes during construction process. Provision of waste skips for specific materials and maximisation of on-site reuse of materials are also found to be among the key factors for engendering waste minimization. The result of factor analysis suggests four factors underlying on-site waste management practices with 96.093% of total variance. These measures include contractual provisions for waste minimization, waste segregation, maximisation of materials reuse and effective logistic management. Strategies through which each of the underlying measures could be achieved are further discussed in the paper. Findings of this study would assist construction site managers and other site operatives in reducing waste generated by construction activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

A System Approach to Advanced Practice Clinician Standardization and High Reliability.

Science.gov (United States)

Okuno-Jones, Susan; Siehoff, Alice; Law, Jennifer; Juarez, Patricia

Advanced practice clinicians (APCs) are an integral part of the health care team. Opportunities exist within Advocate Health Care to standardize and optimize APC practice across the system. To enhance the role and talents of APCs, an approach to role definition and optimization of practice and a structured approach to orientation and evaluation are shared. Although in the early stages of development, definition and standardization of accountabilities in a framework to support system changes are transforming the practice of APCs.

Competency Standards for Bachelor of Industrial Technology Graduates for the Construction Industry in Region IV-A: Inputs For Curriculum Enhancement

Directory of Open Access Journals (Sweden)

George P. Compasivo

2015-12-01

Full Text Available The main objective of this study was to develop competency standards for Industrial Technology graduates for employment in the construction industry in Region IV-A, Philippines. It specifically identified the basic and core competency standards for industrial technology and determined the degree of importance of competencies needed in the construction industry sector. The study identified 28 common competencies for three areas of specializations in industrial technology namely: electrical, civil and drafting technology. There were 39 core competencies for electrical, 31 for drafting and 38 items for civil technology. A total of 50 panel of experts were carefully selected using the purposive sampling as respondents in the study. Experts are selected based on their technical know-how or proficiency and currently practicing their line of profession in the construction industry. The study used the descriptive-developmental method of research. The Delphi technique was applied to determine if the competency under investigation reached the general agreement of opinions by the panel of experts involved. The findings implied that the newly developed competency standards were good input for curriculum enhancement in the area of civil, drafting and electrical technology. The study recommended the newly developed competencies may be followed by the faculty in the course they teach and the new competency items suggested by the panel of experts for inclusion in the curriculum for the three areas of specializations may be considered during the curriculum revision.

Parent Talk: How Parents Discursively Construct, Co-Construct and Re-Do Gender Expectations and Practices in Their Young Children

OpenAIRE

Cubbage, April Dawn

2016-01-01

This research explores how parents discursively construct, co-construct and re-do gender expectations and practices of their young children. Using the social construction of gender approach, which views the accomplishment of gender as an ongoing and multifaceted process, the author investigates parents’ of young twins’ discursive engagement with, and commitment to, the gender binary. It examines the ways in which parents are invested in the gender binary, feel accountable to other people rega...

Oswer integrated health and safety standard operating practices. Directive

International Nuclear Information System (INIS)

1993-02-01

The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

40 CFR 63.10390 - What management practice standard must I meet?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What management practice standard must I meet? 63.10390 Section 63.10390 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....10390 What management practice standard must I meet? You must sterilize full loads of items having a...

40 CFR 63.11561 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... standards and management practices? (a) For asphalt processing operations, you must meet the emission limits... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What are my standards and management practices? 63.11561 Section 63.11561 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

24 CFR 1720.135 - Standards of practice.

Science.gov (United States)

2010-04-01

... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) FORMAL PROCEDURES AND RULES OF PRACTICE... the standards of professional and ethical conduct required by practitioners in the courts of the... improper professional conduct. (c) Contemptuous conduct at any hearing shall be grounds for summary...

Standard practice for conducting moist SO2 tests

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This practice covers the apparatus and procedure to be used in conducting qualitative assessment tests in accordance with the requirements of material or product specifications by means of specimen exposure to condensed moisture containing sulfur dioxide. 1.2 The exposure conditions may be varied to suit particular requirements and this practice includes provisions for use of different concentrations of sulfur dioxide and for tests either running continuously or in cycles of alternate exposure to the sulfur dioxide containing atmosphere and to the ambient atmosphere. 1.3 The variant of the test to be used, the exposure period required, the type of test specimen, and the criteria of failure are not prescribed by this practice. Such details are provided in appropriate material and product purchase specifications. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety c...

Beyond competencies: using a capability framework in developing practice standards for advanced practice nursing.

Science.gov (United States)

O'Connell, Jane; Gardner, Glenn; Coyer, Fiona

2014-12-01

This paper presents a discussion on the application of a capability framework for advanced practice nursing standards/competencies. There is acceptance that competencies are useful and necessary for definition and education of practice-based professions. Competencies have been described as appropriate for practice in stable environments with familiar problems. Increasingly competencies are being designed for use in the health sector for advanced practice such as the nurse practitioner role. Nurse practitioners work in environments and roles that are dynamic and unpredictable necessitating attributes and skills to practice at advanced and extended levels in both familiar and unfamiliar clinical situations. Capability has been described as the combination of skills, knowledge, values and self-esteem which enables individuals to manage change, be flexible and move beyond competency. A discussion paper exploring 'capability' as a framework for advanced nursing practice standards. Data were sourced from electronic databases as described in the background section. As advanced practice nursing becomes more established and formalized, novel ways of teaching and assessing the practice of experienced clinicians beyond competency are imperative for the changing context of health services. Leading researchers into capability in health care state that traditional education and training in health disciplines concentrates mainly on developing competence. To ensure that healthcare delivery keeps pace with increasing demand and a continuously changing context there is a need to embrace capability as a framework for advanced practice and education. © 2014 John Wiley & Sons Ltd.

Best practices of Building Information Modelling (BIM) implementation in design phase for construction project

Science.gov (United States)

Kasim, N.; Zainal Abidin, N. A.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. Abd; Saikah, M.

2017-11-01

Implementation of Building Information Modelling (BIM) was expected to bring improvement in current practices of Malaysian construction industry. In the design phase, there is a lack of a ready pool of skilled workers who are able to develop BIM strategic plan and effectively utilise it. These create boundaries for BIM nature in Malaysian construction industry specifically in the design phase to achieve its best practices. Therefore, the objectives of this research are to investigate the current practices of BIM implementation in the design phase as well as the best practices factors of BIM implementation in the design phase. The qualitative research approach is carried out through semi-structured interviews with the designers of different organisations which adopt BIM in the design phase. Data collection is analysed by executing content analysis method. From the findings, the best practices factors of BIM implementation in design phase such as the incentive for BIM training, formal approach to monitoring automated Level of Detailing (LOD), run a virtual meeting and improve Industry Foundation Class (IFC). Thus, best practices factors which lead to practices improvements in the design phase of project development which subsequently improves the implementation of BIM in the design phase of Malaysian construction industry.

77 FR 47883 - The Lead in Construction Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2012-08-10

... Lead in Construction Standard; Extension of the Office of Management and Budget's (OMB) Approval of... proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Lead in Construction Standard (29 CFR 1926.62). DATES: Comments must be submitted...

Fundamental constructs in food parenting practices: a content map to guide future research.

Science.gov (United States)

Vaughn, Amber E; Ward, Dianne S; Fisher, Jennifer O; Faith, Myles S; Hughes, Sheryl O; Kremers, Stef P J; Musher-Eizenman, Dara R; O'Connor, Teresia M; Patrick, Heather; Power, Thomas G

2016-02-01

Although research shows that "food parenting practices" can impact children's diet and eating habits, current understanding of the impact of specific practices has been limited by inconsistencies in terminology and definitions. This article represents a critical appraisal of food parenting practices, including clear terminology and definitions, by a working group of content experts. The result of this effort was the development of a content map for future research that presents 3 overarching, higher-order food parenting constructs--coercive control, structure, and autonomy support--as well as specific practice subconstructs. Coercive control includes restriction, pressure to eat, threats and bribes, and using food to control negative emotions. Structure includes rules and limits, limited/guided choices, monitoring, meal- and snacktime routines, modeling, food availability and accessibility, food preparation, and unstructured practices. Autonomy support includes nutrition education, child involvement, encouragement, praise, reasoning, and negotiation. Literature on each construct is reviewed, and directions for future research are offered. Clear terminology and definitions should facilitate cross-study comparisons and minimize conflicting findings resulting from previous discrepancies in construct operationalization. © The Author(s) 2016. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Standard practice for conducting atmospheric corrosion tests on metals

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers and defines conditions for exposure of metals and alloys to the weather. It sets forth the general procedures that should be followed in any atmospheric test. It is presented as an aid in conducting atmospheric corrosion tests so that some of the pitfalls of such testing may be avoided. As such, it is concerned mainly with panel exposures to obtain data for comparison purposes. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

An Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs: Baseline Measures of Construction Industry Practices for the National Construction Goals.

Science.gov (United States)

Chapman, Robert E.; Rennison, Roderick

The Construction and Building Subcommittee of the National Science and Technology Council (NSTC) has established seven National Construction Goals for the construction industry and is developing baseline measures for current practices and progress with respect to each goal. This document provides a detailed set of baseline measures for the NSTC…

40 CFR 63.11550 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... my standards and management practices? (a) If you own or operate new or existing affected sources at... practices plan. The management practices plan must include the required management practices in paragraphs (a)(1) and (2) of this section and may include any other management practices that are implemented at...

40 CFR 63.10895 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... Foundries § 63.10895 What are my standards and management practices? (a) If you own or operate an affected... management practices in §§ 63.10885 and 63.10886, the requirements in paragraphs (b) through (e) of this... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What are my standards and management...

Standard practice for instrumented indentation testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice defines the basic steps of Instrumented Indentation Testing (IIT) and establishes the requirements, accuracies, and capabilities needed by an instrument to successfully perform the test and produce the data that can be used for the determination of indentation hardness and other material characteristics. IIT is a mechanical test that measures the response of a material to the imposed stress and strain of a shaped indenter by forcing the indenter into a material and monitoring the force on, and displacement of, the indenter as a function of time during the full loading-unloading test cycle. 1.2 The operational features of an IIT instrument, as well as requirements for Instrument Verification Annex A1), Standardized Reference Blocks (Annex A2) and Indenter Requirements (Annex A3) are defined. This practice is not intended to be a complete purchase specification for an IIT instrument. 1.3 With the exception of the non-mandatory Appendix X4, this practice does not define the analysis necessary...

Research on information models for the construction schedule management based on the IFC standard

Directory of Open Access Journals (Sweden)

Weirui Xue

2015-05-01

Full Text Available Purpose: The purpose of this article is to study the description and extension of the Industry Foundation Classes (IFC standard in construction schedule management, which achieves the information exchange and sharing among the different information systems and stakeholders, and facilitates the collaborative construction in the construction projects. Design/methodology/approach: The schedule information processing and coordination are difficult in the complex construction project. Building Information Modeling (BIM provides the platform for exchanging and sharing information among information systems and stakeholders based on the IFC standard. Through analyzing the schedule plan, implementing, check and control, the information flow in the schedule management is reflected based on the IDEF. According to the IFC4, the information model for the schedule management is established, which not only includes the each aspect of the schedule management, but also includes the cost management, the resource management, the quality management and the risk management. Findings: The information requirement for the construction schedule management can be summarized into three aspects: the schedule plan information, the implementing information and the check and control information. The three aspects can be described through the existing and extended entities of IFC4, and the information models are established. Originality/value: The main contribution of the article is to establish the construction schedule management information model, which achieves the information exchange and share in the construction project, and facilitates the development of the application software to meet the requirements of the construction project.

SciJourn Is Magic: Construction of a Science Journalism Community of Practice

Science.gov (United States)

Nicholas, Celeste R.

2017-01-01

This article is the first to describe the discoursal construction of an adolescent community of practice (CoP) in a non-school setting. CoPs can provide optimal learning environments. The adolescent community centered around science journalism and positioned itself dichotomously in relationship to school literacy practices. The analysis focuses on…

Construction raw materials policy and supply practices in Northwestern Europe

NARCIS (Netherlands)

Meulen, M.J. van der; Koopmans, T.P.F.; Pietersen, H.S.

2003-01-01

The present contribution is an inventory of the construction raw materials policy and supply practices in The Netherlands, Belgium, North Rhine-Westphalia, Lower Saxony, Great Britain, Norway and Denmark. The work has been commissioned by the Dutch government in order to benchmark its domestic

A Case for Standards of Counseling Practice.

Science.gov (United States)

Anderson, Donald

1992-01-01

A mature counseling profession has entered the decade of the 1990s. Several factors including professionalism, accountability, health care consumerism, credentialism, and public demands for quality mental health care indicate a need for more definitive statements on standards of practice in counseling. In response to this need, an eight-point…

Standard practice for alternate actinide calibration for inductively coupled plasma-mass spectrometry

CERN Document Server

American Society for Testing and Materials. Philadelphia

2004-01-01

1.1 This practice provides guidance for an alternate linear calibration for the determination of selected actinide isotopes in appropriately prepared aqueous solutions by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). This alternate calibration is mass bias adjusted using thorium-232 (232Th) and uranium-238 (238U) standards. One of the benefits of this standard practice is the ability to calibrate for the analysis of highly radioactive actinides using calibration standards at much lower specific activities. Environmental laboratories may find this standard practice useful if facilities are not available to handle the highly radioactive standards of the individual actinides of interest. 1.2 The instrument response for a series of determinations of known concentration of 232Th and 238U defines the mass versus response relationship. For each standard concentration, the slope of the line defined by 232Th and 238U is used to derive linear calibration curves for each mass of interest using interference equ...

Reduction of construction wastes by improving construction contract management: a multinational evaluation.

Science.gov (United States)

Mendis, Daylath; Hewage, Kasun N; Wrzesniewski, Joanna

2013-10-01

The Canadian construction industry generates 30% of the total municipal solid waste deposited in landfills. Ample evidence can be found in the published literature about rework and waste generation due to ambiguity and errors in contract documents. Also, the literature quotes that disclaimer clauses in contract documents are included in the contractual agreements to prevent contractor claims, which often cause rework. Our professional practice has also noted that there are several disclaimer clauses in standard contract documents which have the potential to cause rework (and associated waste). This article illustrates a comparative study of standard contractual documents and their potential to create rework (and associated waste) in different regions of the world. The objectives of this study are (1) to analyse standard contractual documents in Canada, the USA and Australia in terms of their potential to generate rework and waste, and (2) to propose changes/amendments to the existing standard contract documents to minimise/avoid rework. In terms of construction waste management, all the reviewed standard contract documents have deficiencies. The parties that produce the contract documents include exculpatory clauses to avoid the other party's claims. This approach tends to result in rework and construction waste. The contractual agreements/contract documents should be free from errors, deficiencies, ambiguity and unfair risk transfers to minimise/avoid potential to generate rework and waste.

Standard practice for production and evaluation of field metallographic replicas

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers recognized methods for the preparation and evaluation of cellulose acetate or plastic film replicas which have been obtained from metallographically prepared surfaces. It is designed for the evaluation of replicas to ensure that all significant features of a metallographically prepared surface have been duplicated and preserved on the replica with sufficient detail to permit both LM and SEM examination with optimum resolution and sensitivity. 1.2 This practice may be used as a controlling document in commercial situations. 1.3 The values stated in SI units are to be regarded as the standard. Inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

International Nuclear Information System (INIS)

Wu, Peng; Low, Sui Pheng; Xia, Bo; Zuo, Jian

2014-01-01

primary contribution of this study to the construction industry is to reveal the transparency requirements from international GHG standards and carbon labels for construction products. The findings also offer five key strategies as practical implications for the global community to improve the performance of current carbon labelling schemes on transparency

7 CFR 205.203 - Soil fertility and crop nutrient management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Soil fertility and crop nutrient management practice standard. 205.203 Section 205.203 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT...

Standard practice for manufacturing characterization of digital detector arrays

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice describes the evaluation of Digital Detector Arrays (DDAs), and assures that one common standard exists for quantitative comparison of DDAs so that an appropriate DDA is selected to meet NDT requirements. 1.2 This practice is intended for use by manufacturers or integrators of DDAs to provide quantitative results of DDA characteristics for NDT user or purchaser consumption. Some of these tests require specialized test phantoms to assure consistency among results among suppliers or manufacturers. These tests are not intended for users to complete, nor are they intended for long term stability tracking and lifetime measurements. However, they may be used for this purpose, if so desired. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropr...

77 FR 3798 - Asbestos in Construction Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2012-01-25

... Construction Standard (29 CFR 1926.1101). The standard protects workers from adverse health effects from... standard protects workers from adverse health effects from occupational exposure to asbestos, including... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0002...

Research and practice of informatization construction in waste treatment and management

International Nuclear Information System (INIS)

Kong Jinsong; Guo Weiqun; Yu Ren; Xiang Xinmin

2013-01-01

The goal, content and requirement of the informatization construction in waste treatment and management in nuclear power system are discussed in the paper, as well as some key problems in this process. Taking the engineering practice of informatization construction in a waste treatment center as an example, the composition and architecture of the information system, the consideration and the solution methods of some key problems in system design and development are introduced in the paper. (authors)

Evaluating knowledge transfer practices among construction organization in Malaysia

Science.gov (United States)

Zaidi, Mohd Azian; Baharuddin, Mohd Nurfaisal; Bahardin, Nur Fadhilah; Yasin, Mohd Fadzil Mat; Nawi, Mohd Nasrun Mohd; Deraman, Rafikullah

2016-08-01

The aims of this paper is to identify a key dimension of knowledge transfer component to improve construction organization performance. It investigates the effectiveness of present knowledge transfer practices currently adopted by the Malaysian construction organizations and examines the relationship between knowledge transfer factors and organizational factors. A survey among 151 respondents including a different contractor registration grade was employed for the study. The survey shows that a seven-teen (17) factors known as creating shared awareness for information sharing, communication, personal skills,individual attitude,training, organizational culture, information technology,motivation, monitoring and supervision, service quality,information accessibility, information supply, socialization process,knowledge tools, coaching and monitoring, staff briefing and information sharing were identify as a key dimension for knowledge transfer success. This finding suggest that through improvement of each factor, the recognition of the whole strategic knowledge transfer process can be increase thus helping to strengthen the Malaysian construction organization for competitive advantages.

An Augmented Framework for Practical Development of Construction Robots

Directory of Open Access Journals (Sweden)

Khaled Zied

2008-11-01

Full Text Available The use of robotic systems in performing construction tasks has great potential; however the development of such systems remains problematic. This is due to the lack of a suitable feasibility analysis that can help the decision makers to justify the use of robots and problems in the development process of the system itself. The multidisciplinary and complex nature of construction robotic systems requires a robust development framework for such systems. An augmented framework for the development of construction robots is explained in detail and practically applied to the Star lifter robotic system which is mainly designed to carry heavy tools for construction tasks. The framework consists of two models; the feasibility analysis model and the development process model. The feasibility analysis principles, methodology and tools are explained and discussed in detail. Systems Engineering model is used in the development of the system which allows complete analysis of the system hardware and software components. The purpose of the current project is to develop a general purpose robot that can be employed to perform different jobs to justify its use economically. The presented tools and processes can be utilised in the development of any similar systems.

Towards Integrated Team Practice: A Case of Malaysian Industrialised Building System (IBS Construction Projects

Directory of Open Access Journals (Sweden)

Mohd Nawi Mohd Nasrun

2014-01-01

Full Text Available Problems associated with fragmentation in the traditional construction process, such as isolation of professionals, lack of co-ordination between design and construction, and the sequential manner of its processes, has impacted on construction performance leading to a lack of integration, wastage, low productivity and efficiency. Integrated team practice is perceived as paramount. Unfortunately, there has a limitation of study focus on the dimension of fully integrated team especially for Malaysian Industrialised Building System (IBS projects. Accordingly, this research paper explores and identifies the dimension of fully integrated team from the traditional approach and conduct a validation process for implementing it in Malaysian IBS projects. The research presented uses interviews case study to obtain qualitative data. It was found that the dimension of fully integrated team from the traditional construction process could apply to the Malaysian IBS projects. Suggestions on how an integrated team practice in IBS design and construction process in order to minimise the fragmentation gaps will be concluded.

Construction Technologies for Nuclear Power Plants

International Nuclear Information System (INIS)

2011-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world'. One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Statute Article III, A.6, the IAEA safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on and practical application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. There are three distinct significant phases in a nuclear power plant (NPP) project after the signing of a contract; engineering, procurement, and construction and commissioning. Experience gained over the last forty years has shown that the construction phase is one of the most critical phases for the success of a project. Success is defined as completing the project with the specified quality, and within budget and schedule. The key to a successful construction project is to have an established programme that integrates the critical attributes into the overall project. Some of

Implementation of sustainable and green design and construction practices for bridges.

Science.gov (United States)

2012-12-01

The focus of this research is to develop a framework for more sustainable design and construction : processes for new bridges, and sustainable maintenance practices for existing bridges. The framework : includes a green rating system for bridges. The...

The Case for Family-Friendly Work Practices in the Australian Construction Industry

Directory of Open Access Journals (Sweden)

Valerie Francis

2012-11-01

Full Text Available Although significant changes at the social, demographic, technological and workforce levelshave transformed the relationship between family and work, these changes have notbeen reflected in the employment practices of many construction companies. Many of thejob and organisational factors found to be negatively associated with family functioning arepertinent to construction professionals. Staff are expected to work long hours in demandingroles and this, combined with job insecurity and frequent relocation, means that familylife and individual well-being can be compromised. A growing body of research has foundthat the implementation of family-friendly work policies and practices can lead to greaterproductivity, lower attrition rates and higher morale in the workplace. In addition providinga work environment that is supportive of workers' family roles can help to alleviate workrelatedmental health problems.This paper outlines the changing demographic trends and societal attitudes that are makingindividuals and organisations question current work cultures and structures. Optionsfor making the construction industry a more family-friendly work environment are considered.All professionals, regardless of their age, gender and family responsibilities, canbenefit from these initiatives. The paper concludes by discussing the implications of theseissues for construction companies and future research work.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards.

Science.gov (United States)

Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

2015-06-01

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

Energy Technology Data Exchange (ETDEWEB)

Manley, Stephen, E-mail: stephen.manley@ncahs.health.nsw.gov.au; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P [North Coast Cancer Institute, Lismore, New South Wales (Australia)

2015-06-15

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

International Nuclear Information System (INIS)

Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

2015-01-01

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients

A Model for Translating Ethnography and Theory into Culturally Constructed Clinical Practices

Science.gov (United States)

Schensul, Jean J.; Schensul, Stephen L.; Mekki-Berrada, Abelwahed; Pelto, Pertti J.; Maitra, Shubhada; Verma, Ravi; Saggurti, Niranjan

2015-01-01

This article describes the development of a dynamic culturally constructed clinical practice model for HIV/STI prevention, the Narrative Intervention Model (NIM), and illustrates its application in practice, within the context of a 6-year transdisciplinary research program in Mumbai, India. Theory and research from anthropology, psychology, and public health, and mixed-method ethnographic research with practitioners, patients, and community members, contributed to the articulation of the NIM for HIV/STI risk reduction and prevention among married men living in low-income communities. The NIM involves a process of negotiation of patient narratives regarding their sexual health problems and related risk factors to facilitate risk reduction. The goal of the NIM is to facilitate cognitive-behavioral change through a three-stage process of co-construction (eliciting patient narrative), deconstruction (articulating discrepancies between current and desired narrative), and reconstruction (proposing alternative narratives that facilitate risk reduction). The NIM process extends the traditional clinical approach through the integration of biological, psychological, interpersonal, and cultural factors as depicted in the patient narrative. Our work demonstrates the use of a recursive integration of research and practice to address limitations of current evidence-based intervention approaches that fail to address the diversity of cultural constructions across populations and contexts. PMID:25292448

A model for translating ethnography and theory into culturally constructed clinical practices.

Science.gov (United States)

Nastasi, Bonnie Kaul; Schensul, Jean J; Schensul, Stephen L; Mekki-Berrada, Abelwahed; Pelto, Pertti J; Maitra, Shubhada; Verma, Ravi; Saggurti, Niranjan

2015-03-01

This article describes the development of a dynamic culturally constructed clinical practice model for HIV/STI prevention, the Narrative Intervention Model (NIM), and illustrates its application in practice, within the context of a 6-year transdisciplinary research program in Mumbai, India. Theory and research from anthropology, psychology, and public health, and mixed-method ethnographic research with practitioners, patients, and community members, contributed to the articulation of the NIM for HIV/STI risk reduction and prevention among married men living in low-income communities. The NIM involves a process of negotiation of patient narratives regarding their sexual health problems and related risk factors to facilitate risk reduction. The goal of the NIM is to facilitate cognitive-behavioral change through a three-stage process of co-construction (eliciting patient narrative), deconstruction (articulating discrepancies between current and desired narrative), and reconstruction (proposing alternative narratives that facilitate risk reduction). The NIM process extends the traditional clinical approach through the integration of biological, psychological, interpersonal, and cultural factors as depicted in the patient narrative. Our work demonstrates the use of a recursive integration of research and practice to address limitations of current evidence-based intervention approaches that fail to address the diversity of cultural constructions across populations and contexts.

Standard practice for exposing and evaluating metals and alloys in surface seawater

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This practice covers conditions for the exposure of metals, alloys, and other materials in natural surface seawater such as those typically found in bays, harbors, channels, and so forth, as contrasted with deep ocean testing. This practice covers full immersion, tidal zone and related splash, and spray zone exposures. 1.2 This practice sets forth general procedures that should be followed in conducting seawater exposure tests so that meaningful comparisons may be made from one location to another. 1.3 This practice identifies recommended procedures for evaluating the effects of natural surface seawater on the materials exposed. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regula...

Standard practice for verification and classification of extensometer systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification. The practice is applicable only to instruments that indicate or record values that are proportional to changes in length corresponding to either tensile or compressive strain. Extensometer systems are classified on the basis of the magnitude of their errors. 1.2 Because strain is a dimensionless quantity, this document can be used for extensometers based on either SI or US customary units of displacement. Note 1—Bonded resistance strain gauges directly bonded to a specimen cannot be calibrated or verified with the apparatus described in this practice for the verification of extensometers having definite gauge points. (See procedures as described in Test Methods E251.) 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app...

The implementation of unit price of work standard SNI 7394: 2008 for the construction of reinforced concrete beam

Science.gov (United States)

Tripoli; Mubarak; Nurisra; Mahmuddin

2018-05-01

This paper discusses the implementation of Indonesian National Standard (SNI) 7394: 2008 on procedures for calculating the unit price of concrete work for the construction of building and housing. The standard provides some reinforced concrete constructions unit price (UP) analysis by specified the total number of reinforcing uses. Related to reinforced concrete beam work (Analysis No. 6.31), the reinforcement requirement is stated at 200 kg/m3 of concrete. Once the implementation considers various earthquake zoning, the question will arise about the extent to which the standard is feasible to apply. Therefore, this research aimed to analyze the possibility of UP standard implementation by certain earthquake zonation. This research is focused on the construction of reinforced concrete beam for buildings with function as educational, residential and office buildings. The data used are sourced from 21 buildings in two zones in Aceh Province, covering Zone 10 and Zone 15 based on earthquake map of SNI 1726: 2012. The analysis results indicate that the UP standard for reinforced concrete beam cannot be applied to all zoning. The UP standard is only possible on buildings constructed in Zone 10 or zonation with seismic spectral response 0.6g to 0.7g or lower.

48 CFR 53.301-1427 - Standard Form 1427, Inventory Schedule A-Construction Sheet (Metals in Mill Product Form).

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Standard Form 1427, Inventory Schedule A-Construction Sheet (Metals in Mill Product Form). 53.301-1427 Section 53.301-1427... Illustrations of Forms 53.301-1427 Standard Form 1427, Inventory Schedule A—Construction Sheet (Metals in Mill...

Department of Energy Construction Safety Reference Guide

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

Narcolepsy and its treatment with stimulants. ASDA standards of practice.

Science.gov (United States)

Mitler, M M; Aldrich, M S; Koob, G F; Zarcone, V P

1994-06-01

This review is part of the standards of practice recommendations. It has been commended and reviewed by the Board of the ASDA. It reflects recommendations of the Board for the practice of sleep medicine in North America. The subcommittee is responsible for the presented write-up.

The European Construction Social Partners: Gender Equality in Theory and Practice

DEFF Research Database (Denmark)

Pedersen, Elsebet Frydendal

2005-01-01

that play a role in women's integration. The responses indicate that the construction industry still displays inertia and conservatism, and that the social partners coroborate rather than counter this. They express a "discourse" of gender equality, but this does not automatically lead to equal opportunity......This article explores the social partners' role in a gender quality agenda in construction at skilled operative level. It draws on a survey of the European construction social partners that investigated the presence of women in skilled trades and the policies, collective agreements and practices...... policies or programmes. The social partners have a platform to make inroads and to change the industry from within, but need further encouragement to put this on their agenda....

CPD Aligned to Competency Standards to Support Quality Practice

Directory of Open Access Journals (Sweden)

Rose Nash

2017-02-01

Full Text Available As medication experts, pharmacists are key members of the patient’s healthcare team. Pharmacists must maintain their competence to practice to remain responsive to the increasingly complex healthcare sector. This paper seeks to determine how competence training for pharmacists may enhance quality in their professional development. Results of two separately administered surveys (2012 and 2013 were compared to examine the reported continued professional development (CPD practices of Australian pharmacists. Examination of results from both studies enabled a focus on how the competency standards inform CPD practice.In the survey administered in 2012, 91% (n = 253/278 pharmacists reported that they knew their current registration requirements. However, in the survey administered in 2013, only 43% (n = 46/107 reported utilization of the National Competency Standards Framework for Pharmacists in Australia (NCS to self-asses their practice as part of their annual re-registration requirements. Fewer, 23% (n = 25/107, used the NCS to plan their CPD. This may be symptomatic of poor familiarity with the NCS, uncertainty around undertaking self-directed learning as part of a structured learning plan and/or misunderstandings around what CPD should include. This is supported by thematic analysis of pharmacists’ social media comments. Initial and ongoing competence training to support meaningful CPD requires urgent attention in Australia. The competence (knowledge, skills and attributes required to engage in meaningful CPD practice should be introduced and developed prior to entry into practice; other countries may find they are in a similar position.

Key Practice for Green Building Management In Malaysia

OpenAIRE

Aghili Nasim; Bin Mohammed Abdul Hakim; Sheau-Ting Low

2016-01-01

This paper identifies the management practices for green building management in Malaysia. A set of practices was ascertained from the reviewed of various established Green Building Standard in the world. Green building practices are significant role in attaining sustainability particularly in the construction industry. Green building is constructed for minimizing impacts to environment as well as decreasing building effects on occupants. To achieve the goals of green buildings, set of managem...

Health impact assessment in the United States: Has practice followed standards?

International Nuclear Information System (INIS)

Schuchter, Joseph; Bhatia, Rajiv; Corburn, Jason; Seto, Edmund

2014-01-01

As an emerging practice, Health Impact Assessment is heterogeneous in purpose, form, and scope and applied in a wide range of decision contexts. This heterogeneity challenges efforts to evaluate the quality and impact of practice. We examined whether information in completed HIA reports reflected objectively-evaluable criteria proposed by the North American HIA Practice Standards Working Group in 2009. From publically-available reports of HIAs conducted in the U.S. and published from 2009 to 2011, we excluded those that were components of, or comment letters on, Environmental Impact Assessments (5) or were demonstration projects or student exercises (8). For the remaining 23 reports, we used practice standards as a template to abstract data on the steps of HIA, including details on the rationale, authorship, funding, decision and decision-makers, participation, pathways and methods, quality of evidence, and recommendations. Most reports described screening, scoping, and assessment processes, but there was substantial variation in the extent of these processes and the degree of stakeholder participation. Community stakeholders participated in screening or scoping in just two-thirds of the HIAs (16). On average, these HIAs analyzed 5.5 determinants related to 10.6 health impacts. Most HIA reports did not include evaluation or monitoring plans. This study identifies issues for field development and improvement. The standards might be adapted to better account for variability in resources, produce fit-for-purpose HIAs, and facilitate innovation guided by the principles. - Highlights: • Our study examined reported HIAs in the U.S. against published practice standards. • Most HIAs used some screening, scoping and assessment elements from the standards. • The extent of these processes and stakeholder participation varied widely. • The average HIA considered multiple health determinants and impacts. • Evaluation or monitoring plans were generally not included in

Health impact assessment in the United States: Has practice followed standards?

Energy Technology Data Exchange (ETDEWEB)

Schuchter, Joseph, E-mail: jws@berkeley.edu [University of California, Berkeley, School of Public Health, Department of Environmental Health Sciences, 50 University Hall, Berkeley, CA 94720-7360 (United States); Bhatia, Rajiv [University of California, Berkeley, Institute of Urban and Regional Development (United States); Corburn, Jason [University of California, Berkeley, College of Environmental Design, Department of City and Regional Planning (United States); Seto, Edmund [University of Washington, School of Public Health, Department of Environmental and Occupational Health (United States)

2014-07-01

As an emerging practice, Health Impact Assessment is heterogeneous in purpose, form, and scope and applied in a wide range of decision contexts. This heterogeneity challenges efforts to evaluate the quality and impact of practice. We examined whether information in completed HIA reports reflected objectively-evaluable criteria proposed by the North American HIA Practice Standards Working Group in 2009. From publically-available reports of HIAs conducted in the U.S. and published from 2009 to 2011, we excluded those that were components of, or comment letters on, Environmental Impact Assessments (5) or were demonstration projects or student exercises (8). For the remaining 23 reports, we used practice standards as a template to abstract data on the steps of HIA, including details on the rationale, authorship, funding, decision and decision-makers, participation, pathways and methods, quality of evidence, and recommendations. Most reports described screening, scoping, and assessment processes, but there was substantial variation in the extent of these processes and the degree of stakeholder participation. Community stakeholders participated in screening or scoping in just two-thirds of the HIAs (16). On average, these HIAs analyzed 5.5 determinants related to 10.6 health impacts. Most HIA reports did not include evaluation or monitoring plans. This study identifies issues for field development and improvement. The standards might be adapted to better account for variability in resources, produce fit-for-purpose HIAs, and facilitate innovation guided by the principles. - Highlights: • Our study examined reported HIAs in the U.S. against published practice standards. • Most HIAs used some screening, scoping and assessment elements from the standards. • The extent of these processes and stakeholder participation varied widely. • The average HIA considered multiple health determinants and impacts. • Evaluation or monitoring plans were generally not included in

Data Center Energy Efficiency Standards in India: Preliminary Findings from Global Practices

Energy Technology Data Exchange (ETDEWEB)

Raje, Sanyukta; Maan, Hermant; Ganguly, Suprotim; Singh, Tanvin; Jayaram, Nisha; Ghatikar, Girish; Greenberg, Steve; Kumar, Satish; Sartor, Dale

2015-06-01

Global data center energy consumption is growing rapidly. In India, information technology industry growth, fossil-fuel generation, and rising energy prices add significant operational costs and carbon emissions from energy-intensive data centers. Adoption of energy-efficient practices can improve the global competitiveness and sustainability of data centers in India. Previous studies have concluded that advancement of energy efficiency standards through policy and regulatory mechanisms is the fastest path to accelerate the adoption of energy-efficient practices in the Indian data centers. In this study, we reviewed data center energy efficiency practices in the United States, Europe, and Asia. Using evaluation metrics, we identified an initial set of energy efficiency standards applicable to the Indian context using the existing policy mechanisms. These preliminary findings support next steps to recommend energy efficiency standards and inform policy makers on strategies to adopt energy-efficient technologies and practices in Indian data centers.

Aligning Mathematical Tasks to the Common Core Standards for Mathematical Practice

OpenAIRE

Johnson, Raymond

2016-01-01

How do algebra teachers align mathematical tasks to the CCSSM Standards of Mathematical Practice? Using methods of design-based implementation research, we identified difficulties of alignment to practices and developed strategies identifying high-quality tasks.

Standard practice for leaks using bubble emission techniques

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This practice describes accepted procedures for and factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include specimen preparation, apparatus, test conditions, methods of cleaning specimens, evaluation of results, and calculation and reporting of corrosion rates. This practice also emphasizes the importance of recording all pertinent data and provides a checklist for reporting test data. Other ASTM procedures for laboratory corrosion tests are tabulated in the Appendix. (Warning-In many cases the corrosion product on the reactive metals titanium and zirconium is a hard and tightly bonded oxide that defies removal by chemical or ordinary mechanical means. In many such cases, corrosion rates are established by mass gain rather than mass loss.) 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, assoc...

The uses and implications of standards in general practice consultations

DEFF Research Database (Denmark)

Lippert, Maria Laura; Reventlow, Susanne; Kousgaard, Marius Brostrøm

2017-01-01

Quality standards play an increasingly important role in primary care through their inscription in various technologies for improving professional practice. While ‘hard’ biomedical standards have been the most common and debated, current quality development initiatives increasingly seek to include...... as manifestations of an inherent conflict between principles of patient-centredness and formal biomedical quality standards. However, this study suggests that standards on the ‘softer’ aspects of care may just as well interfere with a clinical approach relying on situated and attentive interactions with patients....

Academy of Nutrition and Dietetics: standards of practice and standards of professional performance for registered dietitian nutritionists (competent, proficient, and expert) in adult weight management.

Science.gov (United States)

Jortberg, Bonnie; Myers, Eileen; Gigliotti, Linda; Ivens, Barbara J; Lebre, Monica; Burke March, Susan; Nogueira, Isadora; Nwankwo, Robin; Parkinson, Meredith R; Paulsen, Barbara; Turner, Tonya

2015-04-01

Weight management encompasses the inter-relationship of nutrition, physical activity, and health behavior change. Nutrition is key for the prevention and treatment of obesity and chronic disease and maintenance of overall health. Thus, the Weight Management Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed Standards of Practice and Standards of Professional Performance for Registered Dietitian Nutritionists (RDNs) in Adult Weight Management as a resource for RDNs working in weight management. This document allows RDNs to assess their current skill levels and to identify areas for further professional development in this expanding practice area. This document describes the current standards for weight management practice for RDNs. The Standards of Practice represent the four steps in the Nutrition Care Process as applied to the care of patients/clients. The Standards of Professional Performance consist of six domains of professionalism: Quality in Practice, Competence and Accountability, Provision of Services, Application of Research, Communication and Application of Knowledge, and Utilization and Management of Resources. Within each standard, specific indicators provide measurable action statements that illustrate how the standard can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for RDNs working in weight management. The Standards of Practice and Standards of Professional Performance are complementary resources for the Registered Dietitian Nutritionist in weight management. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Improvement of Cost Calculation in Constructions – Application of the Standard Cost Method

Directory of Open Access Journals (Sweden)

Adela Breuer

2010-12-01

Full Text Available Grace to the analysis of several commercial companies effectively performed “on the field”, we could remark the necessity to change the method of cost calculation, our motivation being related to the simplification of calculations and the reduction of the labour volume, but especially the necessity to know in due time the deviations occurred as well as the causes having led to their apparition. The importance of knowing the deviations in due time results from the very basic characteristics of the constructions execution, i.e. the performance of works during several budgetary years, which leads to the modifications of prices and materials, the introduction of new technologies, and to the performance of open air activities, making the execution of constructions works be influenced by the atmospheric condition. But the most important aspect of knowing the deviations is the correct determination of expenses and their inscribing in the corresponding period, in view of determining the result of the budgetary year. Our proposal for the enhancement of the method of cost calculation in constructions is the application of the standard cost method in the variant “single standard cost”.

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for ultrasonic test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice facilitates the interoperability of ultrasonic imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E 2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E 2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, transfer and archival storage. The goal of Practice E 2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E 2339 provides a data dictionary and set of information modules that are applicable to all NDE modalities. This practice supplements Practice E 2339 by providing information object definitions, information ...

Co-operation an competition in the construction industry of the Netherlands

NARCIS (Netherlands)

Doree, Andries G.; Holmen, Elsebeth; Caerteling, Jasper; Greenwood, D

2003-01-01

In 2002, a Parliamentary Enquiry Committee exposed widespread collusion practices in the Dutch construction industry. The construction industry in the Netherlands is in turmoil and is seen as not living up to the standards that society requires. There seems to be a culture and an environment that

AN ASSESSMENT OF FACTORS AFFECTING MATERIAL STOCK CONTROL PRACTICE ON SELECTED CONSTRUCTION SITES IN NIGERIA

OpenAIRE

Adafin, Johnson Kayode; Ayodele, Elijah Olusegun; Daramola, Olufemi

2011-01-01

This research examines the stock control methods utilized by construction firms on construction sites with a view to assessing the factors affecting material stock control practice by construction firms as well as determining the impact of factors affecting material stock control on building project performance. Data were collected with the aid of well-structured questionnaire administered on a number of construction professionals and technicians in some randomly selected building constructio...

European standards for composite construction

NARCIS (Netherlands)

Stark, J.W.B.

2000-01-01

The European Standards Organisation (CEN) has planned to develop a complete set of harmonized European building standards. This set includes standards for composite steel and concrete buildings and bridges. The Eurocodes, being the design standards, form part of this total system of European

Altering the use of agricultural into construction land: Practice and trends

Directory of Open Access Journals (Sweden)

Počuča Milan

2015-01-01

Full Text Available Preservation of agricultural land as an imperative of prosperity of agriculture of the Republic of Serbia needs to be observed through causal questions as well, such as change of purpose of agricultural land into construction land, which is necessarily followed by conversion, a decade-long problem. Insufficiently resolved current questions of the aforementioned within legislative framework open up the possibility for improper use and exploitation of agricultural land. It is necessary to regulate the issue of conversion of construction land by legislative regulations i.e. altering use rights into property rights on construction land, and by doing so, open the way to investments in the Republic of Serbia. With the analysis of the effects of conversion and the adoption of a special law on this issue, construction activity would further prosper. The aim of this paper is to assess adequately the current problems of consumption, preservation and actual implementation of transferring agricultural land to construction land, with a view of the facts, practices and tendencies.

Anthropometric protocols for the construction of new international fetal and newborn growth standards: the INTERGROWTH-21st Project.

Science.gov (United States)

Cheikh Ismail, L; Knight, H E; Bhutta, Z; Chumlea, W C

2013-09-01

The primary aim of the INTERGROWTH-21(st) Project is to construct new, prescriptive standards describing optimal fetal and preterm postnatal growth. The anthropometric measurements include the head circumference, recumbent length and weight of the infants, and the stature and weight of the parents. In such a large, international, multicentre project, it is critical that all study sites follow standardised protocols to ensure maximal validity of the growth and nutrition indicators used. This paper describes, in detail, the selection of anthropometric personnel, equipment, and measurement and calibration protocols used to construct the new standards. Implementing these protocols at each study site ensures that the anthropometric data are of the highest quality to construct the international standards. © 2013 Royal College of Obstetricians and Gynaecologists.

The role of production and teamwork practices in construction safety: a cognitive model and an empirical case study.

Science.gov (United States)

Mitropoulos, Panagiotis Takis; Cupido, Gerardo

2009-01-01

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents. The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)--that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company. The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring. The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities. The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction

Practical Significance of Basin Water Market Construction on Agricultural Production

Institute of Scientific and Technical Information of China (English)

2011-01-01

On the basis of introducing the concept of water market and the water market research in cluding both domestic market and foreign market,the system design features of water market are analyzed.The features include the prior distribution of agricultural water right,the close construction of market structure,reasonable price of water obtaining right and water pollution-discharge right and scientific stipulation of total volume of water use and total volume of pollution drainage.The practical significances of basin water market construction on Chinese agricultural production are revealed,which clover safeguarding the safety of agricultural water;effectively alleviating agricultural drought;saving the agricultural production water and improving the quality of agricultural products.

77 FR 10415 - Standards for Business Practices for Interstate Natural Gas Pipelines

Science.gov (United States)

2012-02-22

...] Standards for Business Practices for Interstate Natural Gas Pipelines AGENCY: Federal Energy Regulatory... American Energy Standards Board (NAESB) applicable to natural gas pipelines.\\1\\ The Commission also... Quadrant (WGQ) of the North American Energy Standards Board (NAESB) applicable to natural gas pipelines...

SciJourn is magic: construction of a science journalism community of practice

Science.gov (United States)

Nicholas, Celeste R.

2017-06-01

This article is the first to describe the discoursal construction of an adolescent community of practice (CoP) in a non-school setting. CoPs can provide optimal learning environments. The adolescent community centered around science journalism and positioned itself dichotomously in relationship to school literacy practices. The analysis focuses on recordings from a panel-style research interview from an early implementation of the Science Literacy Through Science Journalism (SciJourn) project. Researchers trained high school students participating in a youth development program to write science news articles. Students engaged in the authentic practices of professional science journalists, received feedback from a professional editor, and submitted articles for publication. I used a fine-grained critical discourse analysis of genre, discourse, and style to analyze student responses about differences between writing in SciJourn and in school. Students described themselves as agentic in SciJourn and passive in school, using an academic writing discourse of deficit to describe schooling experiences. They affiliated with and defined a SciJourn CoP, constructing positive journalistic identities therein. Educators are encouraged to develop similar CoPs. The discursive features presented may be used to monitor the development of communities of practice in a variety of settings.

Contractor-, steward-, and coworker-safety practice: associations with musculoskeletal pain and injury-related absence among construction apprentices.

Science.gov (United States)

Kim, Seung-Sup; Dutra, Lauren M; Okechukwu, Cassandra A

2014-07-01

This paper sought to assess organizational safety practices at three different levels of hierarchical workplace structure and to examine their association with injury outcomes among construction apprentices. Using a cross-sectional sample of 1,775 construction apprentices, three measures of organizational safety practice were assessed: contractor-, steward-, and coworker-safety practice. Each safety practice measure was assessed using three similar questions (i.e., on-the-job safety commitment, following required or recommended safe work practices, and correcting unsafe work practices); the summed average of the responses ranged from 1 to 4, with a higher score indicating poorer safety practice. Outcome variables included the prevalence of four types of musculoskeletal pain (i.e., neck, shoulder, hand, and back pain) and injury-related absence. In adjusted analyses, contractor-safety practice was associated with both hand pain (OR: 1.27, 95 % CI: 1.04, 1.54) and back pain (OR: 1.40, 95 % CI: 1.17, 1.68); coworker-safety practice was related to back pain (OR: 1.42, 95 % CI: 1.18, 1.71) and injury-related absence (OR: 1.36, 95 % CI: 1.11, 1.67). In an analysis that included all three safety practice measures simultaneously, the association between coworker-safety practice and injury-related absence remained significant (OR: 1.68, 95 % CI: 1.20, 2.37), whereas all other associations became non-significant. This study suggests that organizational safety practice, particularly coworker-safety practice, is associated with injury outcomes among construction apprentices.

Standardization of mapping practices in the British Geological Survey

Science.gov (United States)

Allen, Peter M.

1997-07-01

Because the British Geological Survey (BGS) has had, since its foundation in 1835, a mandate to produce geological maps for the whole of Great Britain, there is a long history of introducing standard practices in the way rocks and rock units have been named, classified and illustrated on maps. The reasons for the failure of some of these practices are examined and assessed in relation to the needs of computerized systems for holding and disseminating geological information.

77 FR 28331 - Standards for Business Practices for Interstate Natural Gas Pipelines

Science.gov (United States)

2012-05-14

...] Standards for Business Practices for Interstate Natural Gas Pipelines AGENCY: Federal Energy Regulatory...) applicable to natural gas pipelines. The Commission, however, did not propose to adopt two standards it found... Wholesale Gas Quadrant of the North American Energy Standards Board (NAESB) applicable to natural gas...

77 FR 43711 - Standards for Business Practices of Interstate Natural Gas Pipelines

Science.gov (United States)

2012-07-26

...; Order No. 587-V] Standards for Business Practices of Interstate Natural Gas Pipelines AGENCY: Federal... North American Energy Standards Board (NAESB) applicable to natural gas pipelines. In addition, based on... (WGQ) of the North American Energy Standards Board (NAESB) applicable to natural gas pipelines...

Standard practice for examination of welds using the alternating current field measurement technique

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice describes procedures to be followed during alternating current field measurement examination of welds for baseline and service-induced surface breaking discontinuities. 1.2 This practice is intended for use on welds in any metallic material. 1.3 This practice does not establish weld acceptance criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system might not be exact equivalents; therefore, each system shall be used independently of the other. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Comparative analysis of structural concrete Quality Assurance practices on nine nuclear and three fossil fuel power plant construction projects. Final summary report

International Nuclear Information System (INIS)

Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.J. Jr.

1978-12-01

A summary of two reports, COO/4120-1 and COO/4120-2, is given. A comparative analysis was made of the Quality Assurance practices related to the structural concrete phase on nine nuclear and three fossil fuel power plant projects which are (or have been) under construction in the United States in the past ten years. For the nuclear projects the analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. For the fossil projects the analysis identified the response of each Quality Assurance program to criteria similar to those which were applicable in the nuclear situation. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspects were examined whenever they interfaced with the construction aspects

Wound, Ostomy, and Continence Nursing: Scope and Standards of Practice, 2nd Edition: An Executive Summary.

Science.gov (United States)

2018-04-25

Wound, ostomy, and continence (WOC) nursing was recognized as a nursing specialty by the American Nurses Association in February 2010, and the Society published the original scope and standards of WOC nursing practice in May 2010. The Wound, Ostomy, and Continence Nursing: Scope and Standards of Practice, 2nd Edition is the definitive resource promoting excellence in professional practice, quality care, and improved patient outcomes in WOC specialty practice. It can be used to articulate the value of WOC nurses to administrators, legislators, payers, patients, and others. The second edition also provides an overview of the scope of WOC nursing practice including a description of the specialty, the history and evolution of WOC nursing, characteristics of WOC nursing practice, and description of the trispecialty. The document describes various WOC nurse roles, populations served, practice settings, care coordination, and collaboration. Educational preparation, levels of practice within WOC specialty nursing, certification, mandate for continuous professional development, ethics, current trends, future considerations and challenges, and standards of WOC nursing practice and professional performance with competencies for each standard are provided. The purpose of this Executive Summary is to describe the process for developing the scope and standards document, provide an overview of the scope of WOC nursing practice, and list the standards of practice and professional performance along with the competencies for each level of WOC nurse provider. The original document is available from the WOCN Society's online book store (www.wocn.org).

Development of standards, codes of practice and guidelines at the national level

International Nuclear Information System (INIS)

Swindon, T.N.

1989-01-01

Standards, codes of practice and guidelines are defined and their different roles in radiation protection specified. The work of the major bodies that develop such documents in Australia - the National Health and Medical Research Council and the Standards Association of Australia - is discussed. The codes of practice prepared under the Environment Protection (Nuclear Codes) Act, 1978, an act of the Australian Federal Parliament, are described and the guidelines associated with them outlined. 5 refs

A Standard of Knowledge for the Professional Practice of Toxicology.

Science.gov (United States)

Hulla, Janis E; Kinter, Lewis B; Kelman, Bruce

2015-08-01

Employers, courts, and the general public judge the credibility of professionals based on credentials such as academic degrees, publications, memberships in professional organizations, board certifications, and professional registrations. However, the relevance and merit of these credentials can be difficult to determine objectively. Board certification can be a reliable indicator of proficiency if the certifying organization demonstrates, through regularly scheduled independent review, that its processes meet established standards and when a certificate holder is required to periodically demonstrate command of a body of knowledge that is essential to current professional practice. We report herein a current Standard of Knowledge in general toxicology compiled from the experience and opinions of 889 certified practicing professional toxicologists. An examination is the most commonly used instrument for testing a certification candidate's command of the body of knowledge. However, an examination-based certification is only creditable when the body of knowledge, to which a certification examination tests, is representative of the current knowledge, skills, and capabilities needed to effectively practice at the professional level. Thus, that body of knowledge must be the current "Standard of Knowledge" for the profession, compiled in a transparent fashion from current practitioners of the profession. This work was conducted toward ensuring the scientific integrity of the products produced by professional toxicologists.

Young worker safety in construction: do family ties and workgroup size affect hazard exposures and safety practices?

Science.gov (United States)

Rauscher, Kimberly J; Myers, Douglas J; Runyan, Carol W; Schulman, Michael

2012-01-01

Little is known about how social aspects of the work environment influence exposures or safety practices affecting young construction workers. Our objective was to investigate whether working on a construction site with a small number of workers (≤10 vs. 11-50) or having a family-firm connection (working in a family-owned firm or one in which a family member also works) impacts hazard exposures and safety practices. Participants included 187 North Carolina construction workers 14 to 17 years old who were surveyed about their jobs. We conducted stratified analyses using cross-tabulations and chi-square statistics to measure associations between workgroup size (i.e., the total number of workers on a jobsite) and family-firm connections (yes/no) and hazard exposures (e.g., saws) and safety practices (e.g., supervision). Having a family-firm connection was associated with fewer hazard exposures and greater safety practices. Youth who worked on jobsites with a larger workgroup (11-50 workers) reported more hazards but also more safety practices. Family-firm connections, in particular, may have a protective effect for youth in construction. Even though the statistical significance of our findings on workgroup size was limited in places, the pattern of differences found suggest that further research in this area is warranted.

Academic Digital Library Construction Evaluation: Measures and Approaches

OpenAIRE

Wang , Qiyun

2008-01-01

Through review norms, standards and practice related to academic digital library construction evaluation at home and abroad, on the basis of investigation and study on the digital library evaluation at home and abroad, for status quo of the academic digital library construction, using qualitative analysis and quantitative analysis method, with methods and indicators for the traditional library evaluation system as a reference coordinates, put forward a comprehensive evaluation index system of...

The satisfactory growth and development at 2 years of age of the INTERGROWTH-21st Fetal Growth Standards cohort support its appropriateness for constructing international standards.

Science.gov (United States)

Villar, José; Cheikh Ismail, Leila; Staines Urias, Eleonora; Giuliani, Francesca; Ohuma, Eric O; Victora, Cesar G; Papageorghiou, Aris T; Altman, Douglas G; Garza, Cutberto; Barros, Fernando C; Puglia, Fabien; Ochieng, Roseline; Jaffer, Yasmin A; Noble, Julia A; Bertino, Enrico; Purwar, Manorama; Pang, Ruyan; Lambert, Ann; Chumlea, Cameron; Stein, Alan; Fernandes, Michelle; Bhutta, Zulfiqar A; Kennedy, Stephen H

2018-02-01

The World Health Organization recommends that human growth should be monitored with the use of international standards. However, in obstetric practice, we continue to monitor fetal growth using numerous local charts or equations that are based on different populations for each body structure. Consistent with World Health Organization recommendations, the INTERGROWTH-21 st Project has produced the first set of international standards to date pregnancies; to monitor fetal growth, estimated fetal weight, Doppler measures, and brain structures; to measure uterine growth, maternal nutrition, newborn infant size, and body composition; and to assess the postnatal growth of preterm babies. All these standards are based on the same healthy pregnancy cohort. Recognizing the importance of demonstrating that, postnatally, this cohort still adhered to the World Health Organization prescriptive approach, we followed their growth and development to the key milestone of 2 years of age. The purpose of this study was to determine whether the babies in the INTERGROWTH-21 st Project maintained optimal growth and development in childhood. In the Infant Follow-up Study of the INTERGROWTH-21 st Project, we evaluated postnatal growth, nutrition, morbidity, and motor development up to 2 years of age in the children who contributed data to the construction of the international fetal growth, newborn infant size and body composition at birth, and preterm postnatal growth standards. Clinical care, feeding practices, anthropometric measures, and assessment of morbidity were standardized across study sites and documented at 1 and 2 years of age. Weight, length, and head circumference age- and sex-specific z-scores and percentiles and motor development milestones were estimated with the use of the World Health Organization Child Growth Standards and World Health Organization milestone distributions, respectively. For the preterm infants, corrected age was used. Variance components analysis was

Standard practice for digital imaging and communication nondestructive evaluation (DICONDE) for computed radiography (CR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of computed radiography (CR) imaging and data acquisition equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This practice is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information objec...

7 CFR 205.206 - Crop pest, weed, and disease management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Crop pest, weed, and disease management practice... Requirements § 205.206 Crop pest, weed, and disease management practice standard. (a) The producer must use management practices to prevent crop pests, weeds, and diseases including but not limited to: (1) Crop...

Constructing engineers through practice: Gendered features of learning and identity development

Science.gov (United States)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of

Standing at the Crossroads: The Pedagogical Intersection between Standards and Relationships

Science.gov (United States)

King, Jeffry

2015-01-01

The purpose of this case is to examine the connection between the pedagogical practices of standards and relationships. Although research supports the importance of both practices, current efforts often construct a situation where educators must choose between the two. This perception pits one practice against the other, demanding educators choose…

Diskette-based database covering standards etc. of relevance to the construction of wind turbines

International Nuclear Information System (INIS)

1994-05-01

The project concerns the development of the database ''Diskettebaseret database med vindmoellestandarder'' (diskette-based database containing wind turbine standards), which contains information about standards, recommendations and other technical documents of relevance for the design, construction and approval of wind mills. The information in the database covers data from Denmark, UK, Germany, Holland and USA together with data from internationally recognized standards and recommendations. The database is contained on a single PC-diskette, which also contains the purpose-built userfriendly serchsoftware. About 5500 records are included in the database. The last edition of the database was updated January 1994. (au)

Co-Constructed Identities and Literacy Practices: How Identities of One Teacher and Her First Grade Students Are Enacted and Co-Constructed through Literacy Practices and a Third Space

Science.gov (United States)

Ramlal, Sasha R.

2014-01-01

This dissertation explored how identities of students and a teacher in a first grade classroom were co-constructed through various literacy practices and within a third space. Drawing on research that documented the strong connection between literacy and identity and its socio-cultural connections, this qualitative study incorporates ethnographic…

Safety standards, legislation and codes of practice for fuel cell manufacture and operation

Energy Technology Data Exchange (ETDEWEB)

Wilcox, C.P.

1999-07-01

This report examines safety standards, legislation and codes of practice for fuel cell manufacture and operation in the UK, Europe and internationally. Management of health and safety in the UK is discussed, and the characteristics of phosphoric acid (PAFC), proton exchange membrane (PEM), molten carbonate (MCFC), solid oxide (SOFC) fuel cells are described. Fuel cell power plant standards and manufacture in the UK, design and operational considerations, end of life disposal, automotive fuel cell system, and fuelling and vehicular concerns are explored, and standards, legislation and codes of practice are explained in the appendix.

Use of standardized outcome measures in physical therapist practice: perceptions and applications.

Science.gov (United States)

Jette, Diane U; Halbert, James; Iverson, Courtney; Miceli, Erin; Shah, Palak

2009-02-01

Standardized instruments for measuring patients' activity limitations and participation restrictions have been advocated for use by rehabilitation professionals for many years. The available literature provides few recent reports of the use of these measures by physical therapists in the United States. The primary purpose of this study was to determine: (1) the extent of the use of standardized outcome measures and (2) perceptions regarding their benefits and barriers to their use. A secondary purpose was to examine factors associated with their use among physical therapists in clinical practice. The study used an observational design. A survey questionnaire comprising items regarding the use and perceived benefits and barriers of standardized outcome measures was sent to 1,000 randomly selected members of the American Physical Therapy Association (APTA). Forty-eight percent of participants used standardized outcome measures. The majority of participants (>90%) who used such measures believed that they enhanced communication with patients and helped direct the plan of care. The most frequently reported reasons for not using such measures included length of time for patients to complete them, length of time for clinicians to analyze the data, and difficulty for patients in completing them independently. Use of standardized outcome measures was related to specialty certification status, practice setting, and the age of the majority of patients treated. The limitations included an unvalidated survey for data collection and a sample limited to APTA members. Despite more than a decade of development and testing of standardized outcome measures appropriate for various conditions and practice settings, physical therapists have some distance to go in implementing their use routinely in most clinical settings. Based on the perceived barriers, alterations in practice management strategies and the instruments themselves may be necessary to increase their use.

Nursing Faculty Decision Making about Best Practices in Test Construction, Item Analysis, and Revision

Science.gov (United States)

Killingsworth, Erin Elizabeth

2013-01-01

With the widespread use of classroom exams in nursing education there is a great need for research on current practices in nursing education regarding this form of assessment. The purpose of this study was to explore how nursing faculty members make decisions about using best practices in classroom test construction, item analysis, and revision in…

Global Standardization or National Differentiation of HRM Practices in Multinational Companies?

DEFF Research Database (Denmark)

Edwards, Tony; Sanchez-Mangas, Rocio; Jalette, Patrice

2016-01-01

Drawing on a dataset constructed from a parallel series of nationally representative surveys of multinational companies (MNCs), we compare the performance management (PM) practices of MNCs in the UK, Ireland, Canada, Spain, Denmark and Norway. In each country we analyze data relating to MNCs from...

Construction mathematics

CERN Document Server

Virdi, Surinder; Virdi, Narinder Kaur

2014-01-01

Construction Mathematics is an introductory level mathematics text, written specifically for students of construction and related disciplines. Learn by tackling exercises based on real-life construction maths. Examples include: costing calculations, labour costs, cost of materials and setting out of building components. Suitable for beginners and easy to follow throughout. Learn the essential basic theory along with the practical necessities. The second edition of this popular textbook is fully updated to match new curricula, and expanded to include even more learning exercises. End of chapter exercises cover a range of theoretical as well as practical problems commonly found in construction practice, and three detailed assignments based on practical tasks give students the opportunity to apply all the knowledge they have gained. Construction Mathematics addresses all the mathematical requirements of Level 2 construction NVQs from City & Guilds/CITB and Edexcel courses, including the BTEC First Diploma in...

The Discursive Construction of Organizational Knowledge – Communication Theoretical Issues and Practical Problems

DEFF Research Database (Denmark)

Kastberg, Peter

as in organizational practice, two camps exist. One holds that knowledge is basically information, i.e. a knowledge-as-representation view, and that organizational knowledge, therefore, can be gathered, produced and/or communicated by means of documents, databases etc. The other camp favors the radically different...... a communication theoretical problem, pertaining to lack of conceptual consistency and clarity (although it surely is that); it is also a problem for organizational communication practice. For if organizational knowledge is discursively constructed as a ‘thing’ (as representation) then it can indeed be harvested...... view, the prevailing organizational discourse becomes one of logistics; according to the second view, it becomes one of enabling. Each discourse gives rise to the communicative construction of fundamentally different organizations – and not only as far as organizational knowledge is concerned. I...

CITY ARCHITECTURE AS WAY OF CONSTRUCTION AND DECONSTRUCTION OF SOCIAL PRACTICES IN THE CITY

Directory of Open Access Journals (Sweden)

Ivanova V. V.

2017-06-01

Full Text Available In this article urban architecture, acting as a «natural physical borders of mankind», creates a certain discourse of social practices that construct and define reality, forming views and values. Moreover, that discourse can be deconstructed and problematized through representation of the urban architecture, which provides an opportunity to explore different ways of forming those social practices among citizens. Thus, the main idea of this study is to examine the way in which social practices could be seen as a reflection of citizen’s actions, which, on the one hand, are set up by the urban construction as an objective structure and, on the other hand, modal behavior which are formed by the influence of a certain structure of thought and ideas. To implement the objectives of the study, we use the discourse analysis as a method of analyzing the meanings through which an attempt of deconstruction of practices of urban life is made, the analysis of themes which are brought up to reveal the featured characteristics and values of urban architecture and ways of its coding.

Non_standard Wood

DEFF Research Database (Denmark)

Tamke, Martin

. Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

On the prevailing construction waste recycling practices: a South East Queensland study.

Science.gov (United States)

Tam, Vivian W Y; Kotrayothar, Duangthidar; Loo, Yew-Chaye

2009-03-01

Waste generated from construction and building demolition work constitutes about 68% of all solid waste generated each year in South East Queensland. Consequently, it has created a serious waste management problem. The State Governments of Victoria and New South Wales have been encouraging the use of recycled materials from construction and related waste; they have also promulgated specifications for their use. In Queensland, however, similar regulations are not anticipated in the near future, which explains the lack of funded research conducted in this important arena. This paper presents an evaluation of the prevailing waste recycling practices in Queensland. Nine sites were visited, including two construction sites, three demolition sites, three recycling plants and one landfill in South East Queensland. The difficulties encountered by the recycling programme operators and their associates at these sites are described and the benefits of recycling construction materials are presented. One of the major barriers is that the local councils disallow the use of recycled materials in new construction work. To help rectify these impediments to recycling, recommendations are given to increase the use of recycled construction waste in South East Queensland.

Changing priorities of codes and standards -- quality engineering: Experiences in plant construction, maintenance, and operation

International Nuclear Information System (INIS)

Antony, D.D.; Suleski, P.F.; Meier, J.C.

1994-01-01

Application of the ASME Code across various fossil and nuclear plants necessitates a Company approach adapted by unique status of each plant. This arises from State Statutes, Federal Regulations and consideration of each plant's as-built history over a broad time frame of design, construction and operation. Additionally, the National Board Inspection Code accompanies Minnesota Statutes for plants owned by Northern States Power Company. This paper addresses some key points on NSP's use of ASME Code as a principal mechanical standard in plant design, construction and operation. A primary resource facilitating review of Code provisions is accurate status on current plant configuration. As plant design changes arise, the Code Edition/Addenda of original construction and installed upgrades or replacements are considered against available options allowed by current standards and dialog with the Jurisdictional Authority. Consistent with the overall goal of safe and reliable plant operation, there are numerous Code details and future needs to be addressed in concert with expected plant economics and planned outages for implementation. The discussion begins in the late 60's with new construction of Monticello and Prairie Island (both nuclear), through Sherburne County Units 1 through 3 (fossil), and their changes, replacements or repairs as operating plants

Academy of nutrition and dietetics: revised 2014 standards of practice and standards of professional performance for registered dietitian nutritionists (competent, proficient, and expert) in sports nutrition and dietetics.

Science.gov (United States)

Steinmuller, Patricia L; Kruskall, Laura J; Karpinski, Christine A; Manore, Melinda M; Macedonio, Michele A; Meyer, Nanna L

2014-04-01

Sports nutrition and dietetics addresses relationships of nutrition with physical activity, including weight management, exercise, and physical performance. Nutrition plays a key role in the prevention and treatment of obesity and chronic disease and for maintenance of health, and the ability to engage in physical activity, sports, and other aspects of physical performance. Thus, the Sports, Cardiovascular, and Wellness Nutrition Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed the Revised 2014 Standards of Practice and Standards of Professional Performance as a resource for Registered Dietitian Nutritionists working in sports nutrition and dietetics to assess their current skill levels and to identify areas for further professional development in this emerging practice area. The revised document reflects advances in sports nutrition and dietetics practice since the original standards were published in 2009 and replaces those standards. The Standards of Practice represents the four steps in the Nutrition Care Process as applied to the care of patients/clients. The Standards of Professional Performance covers six standards of professional performance: quality in practice, competence and accountability, provision of services, application of research, communication and application of knowledge, and utilization and management of resources. Within each standard, specific indicators provide measurable action statements that illustrate how the standards can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for Registered Dietitian Nutritionists working in sports nutrition and dietetics. The Standards of Practice and Standards of Professional Performance are complementary resources for Registered Dietitian Nutritionists in sports nutrition and dietetics practice. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc

Use of antibiotics and compliance with standard practices in Poultry ...

African Journals Online (AJOL)

Use of antibiotics and compliance with standard practices in Poultry Health ... African Journal of Sustainable Development ... Antibiotics use among poultry farmers was motivated by factors such as growth promotion ( x̄ = 2.38), ...

Construction Waste Management Profiles, Practices, and Performance: A Cross-Jurisdictional Analysis in Four Countries

Directory of Open Access Journals (Sweden)

Vivian Wing-Yan Tam

2016-02-01

Full Text Available Construction waste management (CWM has received worldwide attention for some time. As a result, a plethora of research, investigating a wide array of CWM issues such as their profiles, practices, and performance, has been reported in individual economies around the globe. However, a cross-jurisdictional comparison of these issues is limitedly presented in the literature despite its importance to benchmarking performance and identifying best CWM practices in the context of globalization whereby knowledge sharing has already transcended traditional country boundaries. The aim of this ex post facto research is to compare CWM profiles, practices, and performance in Australia, Europe (Europe refers to EU-27 member countries in the European Union, including Belgium, France, Germany, Italy, Luxembourg, Netherlands, Denmark, Great Britain, Ireland, Portugal, Spain, Greece, Austria, Finland, Sweden, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Slovakia, Slovenia, Malta, Cyprus, Bulgaria, and Romania., Hong Kong, and the United Kingdom at a national-level, with a view to facilitating CWM knowledge sharing internationally. It does so by triangulating empirical data collected from various national statistical yearbooks with research papers and professional reports on CWM in these economies. It is found that in producing one million (US dollars’ work, construction contributes a volume of solid waste ranging from 28 to 121 tons among countries. Conscientious CWM practices can make a significant difference in reducing, reusing, or recycling construction waste, as evident in the large variation in the CWM performance. While it might be oversimplified to conclude that the best practices in one country can be applied in another, the research provides insightful references into sharing CWM knowledge across boundaries.

Moving NSDC's Staff Development Standards into Practice: Innovation Configurations. Volume I

Science.gov (United States)

National Staff Development Council, 2003

2003-01-01

NSDC's groundbreaking work in developing standards for staff development has now been joined by an equally important book that spells out exactly how those standards would look if they were being implemented by school districts. An Innovation Configuration map is a device that identifies and describes the major components of a new practice--in…

Standard practice for monitoring atmospheric SO2 using the sulfation plate technique

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This practice covers a weighted average effective SO2 level for a 30-day interval through the use of the sulfation plate method, a technique for estimating the effective SO2 content of the atmosphere, and especially with regard to the atmospheric corrosion of stationary structures or panels. This practice is aimed at determining SO2 levels rather than sulfuric acid aerosol or acid precipitation. 1.2 The results of this practice correlate approximately with volumetric SO2 concentrations, although the presence of dew or condensed moisture tends to enhance the capture of SO2 into the plate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Language standardization in sociolinguistics and international business: Theory and practice across the table

DEFF Research Database (Denmark)

Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

2018-01-01

Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business...... model provides a valuable practical lesson for national language planners, both showing that a “comparative standardology” is a valuable undertaking. More voices “at the table” will allow both theory and practice to be further refined and for the role of standards across society to be better understood.......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...

Barriers and Motivations for Construction Waste Reduction Practices in Costa Rica

Directory of Open Access Journals (Sweden)

Lilliana Abarca-Guerrero

2017-12-01

Full Text Available Low- and middle-income countries lag behind in research that is related to the construction industry and the waste problems that the sector is facing. Literature shows that waste reduction and recycling have received a continuous interest from researchers, but mainly from developed countries. Few reports from low- and middle-income countries are concerned about the reuse of masonry, concrete, and mortar in clay based building ceramics or recycling construction waste, but mostly in relation to concrete aggregates. Furthermore, few authors have described the major barriers and motivations for construction waste reduction. The objective of this paper is to report the findings on a research performed in Costa Rica with the objective to determine the barriers and motivations that the construction sector is facing to improve the management of the construction materials. The study is based on data collected in two phases. During the first phase, a survey was sent via e-mail to 419 main contractors registered at the School Federation of Engineers and Architects (CFIA. The second phase consisted of a focus group discussion with 49 professionals from the construction industry to analyse and validate the findings from the survey. Descriptive statistic methods helped to draw the conclusions. The result of the research is a comprehensive list of observed barriers and motivations for waste reduction practices in the construction sector. These are not only applicable to Costa Rica, but can be used as a guide for similar studies in other low- and middle-income countries.

Nursing professional practice environments: setting the stage for constructive conflict resolution and work effectiveness.

Science.gov (United States)

Siu, Heidi; Spence Laschinger, Heather K; Finegan, Joan

2008-05-01

The aim of this study was to examine the impact of nurses' perceived professional practice environment on their quality of nursing conflict management approaches and ultimately their perceptions of unit effectiveness from the perspective of Deutsch's theory of constructive conflict management. Rising reports of hostility and conflict among Canadian nurses are a concern to nurses' health and the viability of effective patient care delivery. However, research on the situational factors that influence nurses' ability to apply effective conflict resolution skills that lead to positive results in practice is limited. A nonexperimental, predictive design was used in a sample of 678 registered nurses working in community hospitals within a large metropolitan area in Ontario. The results supported a modified version of the hypothesized model [chi2(1) = 16.25, Goodness of Fit = 0.99, Comparative Fit Index = 0.98, Root-Mean-Square Error of Approximation = 0.15] linking professional practice environment and core self-evaluation to nurses' conflict management and, ultimately, unit effectiveness. Professional practice environment, conflict management, and core-self evaluation explained approximately 46.6% of the variance in unit effectiveness. Positive professional practice environments and high core self-evaluations predicted nurses' constructive conflict management and, in turn, greater unit effectiveness.

Language standardization in sociolinguistics and international business: Theory and practice across the table

DEFF Research Database (Denmark)

Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

2018-01-01

Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...... of language standardization in the wider discussion of standards as a means of control across society. We analyze the language policy and practice of the Danish multinational, Grundfos, and use it as a “sociolinguistic laboratory” to “test” the theory of language standardization initially elaborated by Einar...

Incorporating Lean Construction agent into the Building Standards Act: the Spanish case study

Directory of Open Access Journals (Sweden)

Brioso Xavier

2016-12-01

Full Text Available There is a demand for lean construction in Europe; even though lean construction is still an emerging field and there is growing interest, there are no regulations on this topic. The main objective of this research is to regulate this role when in a project and to define and develop a building agent structure, according to the Building Standards Act (LOE by its acronym in Spanish, to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain, there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, who are defined in the courts as “constructive managers” or similar. For this reason, courts could establish in the future several liabilities for the lean construction specialist and other agents of the project, depending on their actions and based on the implementation of the lean project delivery system, the target value design and the integrated project delivery. Conversely, it is possible that the level of action of the lean construction specialist may comprise design management, construction management and contract management. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the lean construction specialist. The creation of the following agents is proposed: design manager, construction manager and contract manager, definitions that are developed in this study. These agents are loosely defined, because any project manager, building information modeling manager or similar may act as one or as more-than-one of them. Finally, the creation of the lean construction manager is also proposed, as the agent who takes on the role of the design manager, construction manager and contract manager, but focused on the lean production principles.

Capital budgeting practices: Empirical evaluation of company practices in the construction sector in Colombia

Directory of Open Access Journals (Sweden)

Julián Ochoa Yepes

2014-12-01

Full Text Available The empirical analysis of capital budgeting or investment appraisal is a topic that has been widely studied in developed countries, such as the United States, the United Kingdom, and Canada. The documentation of these practices in emerging countries is scarce. This paper provides some information about current capital budgeting techniques through an empirical study of practices in a group of Colombian companies in the construction industry. In the companies surveyed it was found that 86% of professionals use the most recommended methods in the literature, such as the Internal Rate of Return (IRR and Net Present Value (NPV, with a preference for the IRR (50% always use it over the NPV (36% always use it. It was also found that 95% lack knowledge of more sophisticated methods, such as Real Options (OR. Most of the respondents subjectively determine the discount rate that is used for evaluation, indicating the lack of any theoretical justification to determine an appropriate rate.

Standards for Standardized Logistic Regression Coefficients

Science.gov (United States)

Menard, Scott

2011-01-01

Standardized coefficients in logistic regression analysis have the same utility as standardized coefficients in linear regression analysis. Although there has been no consensus on the best way to construct standardized logistic regression coefficients, there is now sufficient evidence to suggest a single best approach to the construction of a…

77 FR 16547 - Radionuclide National Emission Standards for Hazardous Air Pollutants; Notice of Construction...

Science.gov (United States)

2012-03-21

... Construction Approval to Energy Fuels for Tailings Cell A and the Phase I Evaporation Ponds at the proposed Pi[ntilde]on Ridge Uranium Mill. Tailings Cell A and the Phase I Evaporation Ponds are regulated under 40... ENVIRONMENTAL PROTECTION AGENCY [FRL-9649-9] Radionuclide National Emission Standards for...

Communities of Practice and the Mediation ofTeachers' Responses to Standards-based Reform

Directory of Open Access Journals (Sweden)

Chrysan Gallucci

2003-09-01

Full Text Available This paper evaluates the usefulness of a sociocultural approach for analyzing teachers’ responses to the professional learning demands of standards-based reform policies. A policy-oriented case study of the practice of six elementary teachers who worked in two high poverty schools in a demographically changing district in the state of Washington is summarized. Key findings of that study conclude that communities of teaching practice are sites for teacher learning and are mediators of teachers’ responses to standards-based reform. Characteristics of the communities of practice, including their relative strength and openness (to learning, influence the degree to which teachers work out negotiated and thoughtful responses to policy demands. The present paper discusses the efficacy of Wenger’s (1998 theory of learning for the study of policy to practice connections.

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for digital radiographic (DR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of digital X-ray imaging equipment by specifying image data transfer and archival methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules and a ...

Exploration and practice of data management in information construction of Tianwan nuclear power station

International Nuclear Information System (INIS)

Jiang Lirui; Wang Yinhui; Liu Feng; Zhu Yunfei; Song Jili

2014-01-01

The paper introduces the exploration and practices in TNPS data management system construction, data management system maturity model construction, management system maturity self-evaluation and data quality improvement, etc. Through the identification and illustration on TNPS data management functions and it also illustrates the effect of scientific management on the enterprise operation with the combination of the characteristics of Big Data Time. Then it looks into the prospect of the data management. (authors)

Interim radon-resistant construction guidelines for use in Florida-1989. Final report, August 1987-June 1988

International Nuclear Information System (INIS)

Pugh, T.D.

1990-08-01

The report gives results of a project to investigate, analyze, and develop radon-resistant construction guidelines that are consistent with other building codes and that could be applied to Florida. A literature search resulted in information on radon remediation techniques, new construction methods, and existing radon-resistant building codes such as those in Sweden and Canada. The identified techniques were amended, modified, or supplemented for incorporation into draft model guidelines for new construction in format consistent with the Southern Building Code Congress International, Inc.'s Standard Building Code. A technical review advisory committee formed during development of the guidelines, provided input and recommended changes to the draft guidelines. Although the project has resulted in guidelines for recommended construction practices, they should be coupled with a carefully planned and implemented program of experimentation. Eventually, this approach will lead to building code provisions that are scientifically defensible, cost effective, reliable, and easily incorporated into standard construction practice

The HSE Management Standards Indicator Tool: concurrent and construct validity.

Science.gov (United States)

Marcatto, F; Colautti, L; Larese Filon, F; Luis, O; Ferrante, D

2014-07-01

The Health & Safety Executive Management Standards Indicator Tool (HSE-MS IT) is a questionnaire commonly used to assess work-related stress risks at an organizational level. A critical factor in determining whether this instrument is actually useful is that higher levels of stress risk in the work-design domains should predict higher levels of stress and stress-related outcomes in workers. Only a few studies, however, have addressed this issue. To test both the concurrent and construct validity of the HSE-MS IT, by relating it with another widely used instrument, the Job Content Questionnaire (JCQ), and by examining its relationships with a set of work-related stress outcomes. An anonymous cross-sectional questionnaire was administered to a sample of employees in an Italian municipality. The questionnaire included the HSE-MS IT, self-reported measures of job satisfaction, job motivation and stress at work, the Satisfaction with Life Scale and the reduced form of the JCQ. A total of 760 out of 779 employees completed the questionnaire. Results showed moderate to strong correlation among the corresponding HSE-MS IT and JCQ scales. Hierarchical regression highlighted the specific contribution of each of the HSE-MS IT scales in predicting three relevant work-related stress outcomes (self-reported stress, job satisfaction and job motivation), after controlling for gender, age and life satisfaction. Our findings consolidated the HSE-MS IT validity and showed the specific sensitivity of its scales to assess different aspects of work-related distress, including self-perception of stress at work. These results can have practical implications for the occupational well-being of employees. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Review of Standards of Practice for Beginning Teaching. ACER Policy Briefs. Issue 4

Science.gov (United States)

Ingvarson, Lawrence; Kleinhenz, Elizabeth

2003-01-01

This paper aims to provide a critical review and comparison of the following sets of standards of practice for teachers: (1) The Victorian Interim Teacher Class Standards (ITCS), especially Interim Teacher Class Standards for Beginning Teachers; (2) Professional Standards for Teachers; (3) The National Competencies for Beginning Teaching; (4) The…

Transforming waste into resources: quantification of construction and demoliton in Buenos Aires

OpenAIRE

Yajnes, Marta Edith; Trulls, María Daniela; Putruele, María Belén

2015-01-01

In recent years, intense construction activity worldwide has led to massive environmental degradation, enormous CO² emissions and abuse of our natural resources. The lack of legislation to regulate the negative impact of the construction process in Argentina has allowed for unsustainable practices to take place. There is no standardized classification of materials in the construction area. Land is mixed with ceramic materials in the demolition stage which makes it more difficult to isolate...

NUSS safety standards: A critical assessment

International Nuclear Information System (INIS)

Minogue, R.B.

1985-01-01

The NUSS safety standards are based on systematic review of safety criteria of many countries in a process carefully defined to assure completeness of coverage. They represent an international consensus of accepted safety principles and practices for regulation and for the design, construction, and operation of nuclear power plants. They are a codification of principles and practices already in use by some Member States. Thus, they are not standards which describe methodologies at their present state of evolution as a result of more recent experience and improvements in technological understanding. The NUSS standards assume an underlying body of national standards and a defined technological base. Detailed design and industrial practices vary between countries and the implementation of basic safety standards within countries has taken approaches that conform with national industrial practices. Thus, application of the NUSS standards requires reconciliation with the standards of the country where the reactor will be built as well as with the country from which procurement takes place. Experience in making that reconciliation will undoubtedly suggest areas of needed improvement. After the TMI accident a reassessment of the NUSS programme was made and it was concluded that, given the information at that time and the then level of technology, the basic approach was sound; the NUSS programme should be continued to completion, and the standards should be brought into use. It was also recognized, however, that in areas such as probabilistic risk assessment, human factors methodology, and consideration of detailed accident sequences, more advanced technology was emerging. As these technologies develop, and become more amenable to practical application, it is anticipated that the NUSS standards will need revision. Ideally those future revisions will also flow from experience in their use

Construction of fast experimental reactor 'Joyo' from start of construction to criticality

International Nuclear Information System (INIS)

Sakata, Hajime

1977-01-01

The fast experimental reactor ''Joyo'' is a sodium-cooled, fast neutron reactor using mixed oxide of uranium and plutonium, the first in Japan. The purposes of its construction are to experience and solve the various technical problems expected in the constructions of the prototype reactor ''Monju'' and future practical reactors, and to use as the irradiation facility for developing the fuel and material for fast breeder reactors in Japan after the completion. The construction finished by the end of 1974, and the synthetic functional test was carried out for about two years thereafter. The whole installation was handed over to PNC on March 8, 1977. The reactor attained the criticality on April 24, 1977. The outline of the construction works is described. ''Guidance to the structural design of sodium machinery for Joyo'' was compiled, and the analysis was made according to it. Moreover, various inspection standards regarding welding, electrical machinery, fuel and others were made. The revision of the design for improving the safety and performance was made during the construction at all times. The synthetic functional test was carried out for about two years on 266 items, and subsequently, the criticality test was completed satisfactorily. (Kako, I.)

Standard Practice for Sampling for Particulate Contamination by Tape Lift

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This practice covers procedures for sampling surfaces to determine the presence of particulate contamination, 5 m and larger. The practice consists of the application of a pressure-sensitive tape to the surface followed by the removal of particulate contamination with the removal of the tape. The tape with the adhering particles is then mounted on counting slides. Counting and measuring of particles is done by standard techniques. 1.2 This practice describes the materials and equipment required to perform sampling of surfaces for particle counting and sizing. 1.3 The criteria for acceptance or rejection of a part for conformance to surface cleanliness level requirements shall be determined by the user and are not included in this practice. 1.4 This practice is for use on surfaces that are not damaged by the application of adhesive tape. The use of this practice on any surface of any material not previously tested or for which the susceptibility to damage is unknown is not recommended. In general, metal...

The status of Korean nuclear codes and standards

International Nuclear Information System (INIS)

Namha Kim; Jong-Hae Kim

2005-01-01

Korea Electric Power Industry Code (KEPIC), a set of integrated standards applicable to the design, construction and operation of electric power facilities including nuclear power plants, has been developed on the basis of referring to the prevailing U.S. codes and standards which had been applied to the electric power facilities in Korea. Being the developing and managing organization of KEPIC, Korea Electric Association (KEA) published its first edition in 1995, the second in 200,0 and is expected to publish the 2005 edition. KEPIC was applied to the construction of Ulchin Nuclear Units 5 and 6 in 1997, and will be applicable to the construction of forthcoming nuclear power plants in Korea. Along with the effectuation of the Agreement on Technical Barriers to Trade (TBT) in 1995, the international trend related to codes and standards is changing rapidly. The KEA is, therefore, making its utmost efforts so as for KEPIC to keep abreast with the changing environment in international arena. KEA notified ISO/IEC Information Centre of its acceptance of the Code of Good Practice in the Agreement on TBT. The 2005 KEPIC edition will be retrofitted according to the ISO/IEC Guide 21- Adoption of International Standards as regional or national standards. KEA's efforts will help KEPIC correspond with international standards such as ISO/IEC standards, and internationally recognized standards such as ASME codes and standards. (authors)

Standard practice for preparing, cleaning, and evaluating corrosion test specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This practice covers suggested procedures for preparing bare, solid metal specimens for tests, for removing corrosion products after the test has been completed, and for evaluating the corrosion damage that has occurred. Emphasis is placed on procedures related to the evaluation of corrosion by mass loss and pitting measurements. (Warning—In many cases the corrosion product on the reactive metals titanium and zirconium is a hard and tightly bonded oxide that defies removal by chemical or ordinary mechanical means. In many such cases, corrosion rates are established by mass gain rather than mass loss.) 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see 1 and 7.2.

State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

Science.gov (United States)

2012-08-01

The following document is the summary of results from a survey that was conducted to evaluate : the state-of-the-practice for sediment basin design, construction, maintenance, and inspection : procedures by State Highway Agencies (SHAs) across the na...

Standardized Testing Practices: Effect on Graduation and NCLEX® Pass Rates.

Science.gov (United States)

Randolph, Pamela K

The use standardized testing in pre-licensure nursing programs has been accompanied by conflicting reports of effective practices. The purpose of this project was to describe standardized testing practices in one states' nursing programs and discover if the use of a cut score or oversight of remediation had any effect on (a) first time NCLEX® pass rates, (b) on-time graduation (OTG) or (c) the combination of (a) and (b). Administrators of 38 nursing programs in one Southwest state were sent surveys; surveys were returned by 34 programs (89%). Survey responses were compared to each program's NCLEX pass rate and on-time graduation rate; t-tests were conducted for significant differences associated with a required minimum score (cut score) and oversight of remediation. There were no significant differences in NCLEX pass or on-time graduation rates related to establishment of a cut score. There was a significant difference when the NCLEX pass rate and on-time graduation rate were combined (Outcome Index "OI") with significantly higher program outcomes (P=.02.) for programs without cut-scores. There were no differences associated with faculty oversight of remediation. The results of this study do not support establishment of a cut-score when implementing a standardized testing. Copyright © 2016. Published by Elsevier Inc.

The effect of the OSHA lead exposure in construction standard on blood lead levels among iron workers employed in bridge rehabilitation.

Science.gov (United States)

Levin, S M; Goldberg, M; Doucette, J T

1997-03-01

Over 50,000 workers are at risk of occupational exposure to lead in the course of renovating the nation's deteriorating infrastructure. In mid-1993, to control exposure to lead in the construction setting OSHA promulgated a Lead in Construction Standard. In this study, we assessed the effect of the mandated changes in exposure conditions which followed the introduction of this new standard. We analyzed changes in baseline and maximum blood lead concentrations and in maximum increments in blood lead levels before and after introduction of the standard among iron workers employed in the renovation of a large, lead-painted, steel bridge in New York City. Results indicated that baseline and maximum blood lead levels fell significantly after the implementation of the provisions of the standard, as did maximum increments in blood lead concentrations. Seventy-six percent of the workers maintained blood lead concentrations below 20 micrograms/dl after the OSHA standard, as compared with 66% prior to its implementation. Increments of 20 micrograms/dl or more occurred considerably more frequently before introduction of the standard (13% before vs. 4% after; p = 0.01). Evidence of decreased exposure to lead was observed among iron workers who were present both before and after the introduction of the OSHA standard, as well as among iron workers newly hired after the OSHA provisions were put in place. These findings document the effectiveness of the OSHA construction lead standard in controlling exposure to lead in this complex and variable environment. The data indicate the utility of blood lead determinations in assessing the outcome of industrial hygiene interventions to reduce exposures to lead in the construction setting.

Introduction to Educational Administration: Standards, Theories, and Practice. Second Edition

Science.gov (United States)

Fiore, Douglas J.

2009-01-01

Organized around the ISLLC standards, this text introduces students to the concepts and theories of educational leadership. The new edition adds coverage of such topics as data usage, ethics, innovative hiring practices, and student discipline. Appearing in the second edition are chapter-ending sections called "Point-Counterpoint" which prompt…

School Librarian as Inquisitor of Practice: Reimagine, Reflect, and React with the New Standards

Science.gov (United States)

Burns, Elizabeth

2018-01-01

The modern school library is a complex social setting "grounded in standards and best practice" (AASL 2018). The new "National School Library Standards" have refreshed the student learning standards and aligned new Shared Foundations to the school library. Additionally, the competencies for learners are now complemented by…

Formulation and practice of standards for radiation protection of γ-ray industrial computed tomography

International Nuclear Information System (INIS)

Zhou Rifeng; Wang Jue; Chen Weimin; Li Ping

2009-01-01

There are many differences between industrial CT and industrial radiography, such as imaging principle, inspection time, radiation dose and the requirements for operators etc. The national standards for radiation protection of industrial detection are not applicable to the requirements of protection and safety for γ-ray industrial CT to some extent now. In order to standardize the production and use for γ-ray industrial CT, protect the safety of operators and the public, and to promote the popularization and application of γ-ray industrial CT, it is significant to establish the national standards for radiation protection of γ-ray industrial CT as soon as possible. The purpose of this paper is to introduce the contents of this standard, and specify some important terms. Then there is a brief discussion on the existing problems during establishing such standards. At last, the paper summarize the practice of the standards passed over the past one year, which provides practicable experience for the further implementation. (authors)

Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This test method covers the determination of the relative amount of water absorption by various types of structural core materials when immersed or in a high relative humidity environment. This test method is intended to apply to only structural core materials; honeycomb, foam, and balsa wood. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

40 CFR Table 5 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Transfer Racks

Science.gov (United States)

2010-07-01

... Standards for Transfer Racks 5 Table 5 to Subpart FFFF of Part 63 Protection of Environment ENVIRONMENTAL... Limits and Work Practice Standards for Transfer Racks As required in § 63.2475, you must meet each emission limit and work practice standard in the following table that applies to your transfer racks: For...

Business transactions and standards. Towards a system of concepts and a method for early problem identification in standard implementation projects

NARCIS (Netherlands)

Rukanova, B.D.

2005-01-01

To summarize, with respect to research question one we constructed a system of concepts, while in answer to research question two we proposed a method of how to apply this system of concepts in practice in order to identify potential problems in early stages of standard implementation projects.

Community-Wide Zero Energy Ready Home Standard

Energy Technology Data Exchange (ETDEWEB)

Herk, A. [IBACOS, Inc., Pittsburght, PA (United States); Beggs, T. [IBACOS, Inc., Pittsburght, PA (United States)

2016-02-05

This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the team gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.

PERFORMANCE-BASED CONTRACTING IN CONSTRUCTION PHASE AND MAINTENANCE PHASE OF PAVEMENT

Science.gov (United States)

Yoshida, Takeshi

Performance-based contracting for pavement in Japan started as performance warranties in construction phase, in 1999. Recently, road agencies have recognized the applicability of this type of contracting in outsourcing of maintenance activities. The objectives of this study are to clarify the issues of performance specifying in construction phase and maintenance phase of pavement, and to propose measures to be taken. This paper, with the recognition that the life of each pavement depends on performance standards for various attributes, reviews domestic and foreign examples of performance-based contracting. A performance standard based on the average of current practices can enhance product quality and service life with a warranty contract. Repair thresholds and response time for each deficiency should be considered as performance standards in maintenance phase.

Standard practice for bulk sampling of liquid uranium hexafluoride

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers methods for withdrawing representative samples of liquid uranium hexafluoride (UF6) from bulk quantities of the material. Such samples are used for determining compliance with the applicable commercial specification, for example Specification C787 and Specification C996. 1.2 It is assumed that the bulk liquid UF6 being sampled comprises a single quality and quantity of material. This practice does not address any special additional arrangements that might be required for taking proportional or composite samples, or when the sampled bulk material is being added to UF6 residues already in a container (“heels recycle”). 1.3 The number of samples to be taken, their nominal sample weight, and their disposition shall be agreed upon between the parties. 1.4 The scope of this practice does not include provisions for preventing criticality incidents. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of th...

Integrated emerging contractor development model for the construction industry: practical implementation and statistical quantification

CSIR Research Space (South Africa)

Hauptfleisch, Dries

2007-05-01

Full Text Available , in the shortest possible time. An empowered model has thus been created to ensure the rapid development of emerging construction contractors. This model has a sound theoretical base, is supported by extensive filed research and has been introduced in practice...

78 FR 59725 - Construction Fall Protection Systems Criteria and Practices, and Training Requirements; Extension...

Science.gov (United States)

2013-09-27

...- 1648. Mail, hand delivery, express mail, messenger, or courier service: When using this method, you... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0008] Construction Fall Protection Systems Criteria and Practices, and Training Requirements; Extension of the Office...

Finding Alignment: The Perceptions and Integration of the Next Generation Science Standards Practices by Elementary Teachers

Science.gov (United States)

Smith, Janette; Nadelson, Louis

2017-01-01

Preparing elementary-level teachers to teach in alignment with the eight Next Generation Science Standards (NGSS) practices could prove to be a daunting endeavor. However, the process may be catalyzed by leveraging elements of teacher science instruction that inherently attend to the practice standards. In this study, we investigated the science…

Benefits of wide experience in standardized construction - improvements and adaptation to client requirements

International Nuclear Information System (INIS)

Labat, P.; Vignon, D.

1987-01-01

From the start of the French nuclear program, a major effort was made to achieve standardization, and in the 42 PWR units now in service, there are only three different models of nuclear steam supply systems (NSSS). The success of this program can be directly attributed to the policy of standardization. Construction times are normally less than five years, unit availability greater than 80 %, design costs amounting to only a few percent of the total cost all contribute to the overall result. The power produced in a nuclear power plant in France certainly costs less per kWh than anywhere else in the world. When a design fault is found in one unit of a standardized series, the resulting problems can, of course, be anticipated throughout the entire series and the consequences of that fault will be far greater than in the absence of standardization. In point of fact, the advantages of standardization outweigh the disadvantages even in such cases. If the power plants were not part of a series, faults would be varied and unpredictable. Conversely, standardization results in any faults being centered around a small number of specific problems on which design and repair resources can be concentrated. The effects of this are immediately apparent in shorter repair times and the possibility of preventive action in units liable to be affected by a particular fault

Life quality and living standards in big cities under conditions of high-rise construction development

Science.gov (United States)

Avdeeva, Elena; Averina, Tatiana; Kochetova, Larisa

2018-03-01

Modern urbanization processes occurring on a global scale inevitably lead to an increase in population density in large cities. People assess the state of life quality and living standards of megalopolises under conditions of high-rise construction development ambiguously. Using SWOT analysis, the authors distinguished positive and negative aspects of high-rise construction, highlighted threats to its development and its opportunities. The article considers the model of development of the city's industry and infrastructure, which enables determining the optimal volume of production by sectors and branches of city economy in order to increase its innovative, production and economic potential and business activity.

Potential facilitators and barriers to adopting standard treatment guidelines in clinical practice.

Science.gov (United States)

Sharma, Sangeeta; Pandit, Ajay; Tabassum, Fauzia

2017-04-18

Purpose The purpose of this paper is to assess medicines information sources accessed by clinicians, if sources differed in theory and practice and to find out the barriers and facilitators to effective guideline adoption. Design/methodology/approach In all, 183 doctors were surveyed. Barriers and facilitators were classified as: communication; potential adopters; innovation; organization characteristics and environmental/social/economic context. Findings Most of the clinicians accessed multiple information sources including standard treatment guidelines, but also consulted seniors/colleagues in practice. The top three factors influencing clinical practice guideline adoption were innovation characteristics, environmental context and individual characteristics. The respondents differed in the following areas: concerns about flexibility offered by the guideline; denying patients' individuality; professional autonomy; insights into gaps in current practice and evidence-based practice; changing practices with little or no benefit. Barriers included negative staff attitudes/beliefs, guideline integration into organizational structures/processes, time/resource constraints. Fearing third parties (government and insurance companies) restricting medicines reimbursement and poor liability protection offered by the guidelines emerged as the barriers. Facilitators include aligning organizational structures/processes with the innovation; providing leadership support to guide diffusion; increasing awareness and enabling early innovation during pre/in-service training, with regular feedback on outcomes and use. Practical implications Guideline adoption in clinical practice is partly within doctors' control. There are other key prevailing factors in the local context such as environmental, social context, professional and organizational culture affecting its adoption. Organizational policy and accreditation standards necessitating adherence can serve as a driver. Originality

Gasoline risk management: a compendium of regulations, standards, and industry practices.

Science.gov (United States)

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

This paper is part of a special series of publications regarding gasoline toxicology testing and gasoline risk management; this article covers regulations, standards, and industry practices concerning gasoline risk management. Gasoline is one of the highest volume liquid fuel products produced globally. In the U.S., gasoline production in 2013 was the highest on record (API, 2013). Regulations such as those pursuant to the Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) and many others provide the U.S. federal government with extensive authority to regulate gasoline composition, manufacture, storage, transportation and distribution practices, worker and consumer exposure, product labeling, and emissions from engines and other sources designed to operate on this fuel. The entire gasoline lifecycle-from manufacture, through distribution, to end-use-is subject to detailed, complex, and overlapping regulatory schemes intended to protect human health, welfare, and the environment. In addition to these legal requirements, industry has implemented a broad array of voluntary standards and best management practices to ensure that risks from gasoline manufacturing, distribution, and use are minimized. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

A review of multidisciplinary clinical practice guidelines in suicide prevention: toward an emerging standard in suicide risk assessment and management, training and practice.

Science.gov (United States)

Bernert, Rebecca A; Hom, Melanie A; Roberts, Laura Weiss

2014-10-01

The current paper aims to: (1) examine clinical practice guidelines in suicide prevention across fields, organizations, and clinical specialties and (2) inform emerging standards in clinical practice, research, and training. The authors conducted a systematic literature review to identify clinical practice guidelines and resource documents in suicide prevention and risk management. The authors used PubMed, Google Scholar, and Google Search, and keywords included: clinical practice guideline, practice guideline, practice parameters, suicide, suicidality, suicidal behaviors, assessment, and management. To assess for commonalities, the authors reviewed guidelines and resource documents across 13 key content categories and assessed whether each document suggested validated assessment measures. The search generated 101 source documents, which included N = 10 clinical practice guidelines and N = 12 additional resource documents (e.g., non-formalized guidelines, tool-kits). All guidelines (100 %) provided detailed recommendations for the use of evidence-based risk factors and protective factors, 80 % provided brief (but not detailed) recommendations for the assessment of suicidal intent, and 70 % recommended risk management strategies. By comparison, only 30 % discussed standardization of risk-level categorizations and other content areas considered central to best practices in suicide prevention (e.g., restricting access to means, ethical considerations, confidentiality/legal issues, training, and postvention practices). Resource documents were largely consistent with these findings. Current guidelines address similar aspects of suicide risk assessment and management, but significant discrepancies exist. A lack of consensus was evident in recommendations across core competencies, which may be improved by increased standardization in practice and training. Additional resources appear useful for supplemental use.

Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This photographic practice determines the optical distortion and deviation of a line of sight through a simple transparent part, such as a commercial aircraft windshield or a cabin window. This practice applies to essentially flat or nearly flat parts and may not be suitable for highly curved materials. 1.2 Test Method F 801 addresses optical deviation (angluar deviation) and Test Method F 2156 addresses optical distortion using grid line slope. These test methods should be used instead of Practice F 733 whenever practical. 1.3 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation

CERN Document Server

American Society for Testing and Materials. Philadelphia

1988-01-01

1.1 This practice describes the calculation of luminous (photometric) transmittance and reflectance of materials from spectral radiant transmittance and reflectance data obtained from Test Method E 903. 1.2 Determination of luminous transmittance by this practice is preferred over measurement of photometric transmittance by methods using the sun as a source and a photometer as detector except for transmitting sheet materials that are inhomogeneous, patterned, or corrugated. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards

Science.gov (United States)

Alan Bendtsen; William L. Galligan

1978-01-01

The ASTM standards for establishing clear wood mechanical properties and for deriving structural grades and related allowable properties for visually graded lumber can be confusing and difficult for the uninitiated to interpret. This report provides a practical guide to using these standards for individuals not familiar with their application. Sample stress...

Associations between safety climate and safety management practices in the construction industry.

Science.gov (United States)

Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

2017-06-01

Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

Communities of practice and the construction of the professional identities of nurse educators: A review of the literature.

Science.gov (United States)

Woods, Andrew; Cashin, Andrew; Stockhausen, Lynette

2016-02-01

To comprehensively review the Community of Practice literature from nursing contexts to explore whether and how these communities contribute to the social construction of nurse educator professional identity. Due to the wide scope of predominately qualitative literature on the topic, papers were analysed and themed inductively. CINAHL, MEDLINE, COCHRANE, EBSCO databases, Emerald, Proquest & Google Scholar. These online databases were searched for relevant peer-reviewed journal papers in the English language with no date range specified. The search terms 'nurs* educator' and 'nurs* teacher' were combined with each of the terms 'communit* of practice', 'identity' and 'role' resulting in 293 peer-reviewed journal papers. Where abstracts were missing, introductory and background sections were skimmed for related content. Papers that made incidental reference to either professional identity or a Community of Practice were excluded. In total, 63 primary study or discussion papers were found to have a focus on nurse educator identity and/or communities of practice in healthcare contexts. Papers specifically focused on communities of practice in nursing (n=33) could only be found from the last 10 years (2005-2015). Only five of these focused on nurse educators. Community of Practice theory and the professional teaching literature offers collaborative and active ways for nurse educators to further develop their professional identities. Despite the emergence of communities of practice in the nursing literature, further studies are required to explore how such a construct can facilitate the social construction of nurse educator professional identity. Copyright © 2015 Elsevier Ltd. All rights reserved.

A revisit on the current practice of dispute resolution and ADR in the Malaysian construction industry

Directory of Open Access Journals (Sweden)

Mohd Suhaimi Mohd Danuri

2012-06-01

Full Text Available The current dispute resolution procedures available in the Malaysian construction industry are mainly litigation and arbitration. In addition, the alternative dispute resolutions (ADR, namely mediation and adjudication, have also been introduced as the other methods for resolving disputes. The objective of this study is to examine the current practice of dispute resolution and ADR available in the Malaysian construction industry. The aim of this paper is two-fold: to report the current practice of dispute resolution and ADR, and identify the attributes of successful implementation of both mechanisms based on the perceptions of the Malaysian construction industry players. From the jurisprudence point of view, this study looks into the law as it is, in relation to the current practice of dispute resolution and ADR, by showing how those findings can be used to explain why improvement is needed to promote a successful and well received dispute resolution and ADR, and what lessons can be learnt, towards the formulation of a more viable methods for the Malaysian construction industry. NVivo software has been used to manage and organise the complete interview transcripts and facilitate the data analysis process for this study. Literature review reveals a continuous development of dispute resolution and ADR in the Malaysian construction industry, while, globally the industry has not only embraced ADR but also spearheaded the development of innovative forms of dispute avoidance mechanism. The findings of interviews show that locally, apart from litigation, the common types of ADR are arbitration, mediation and ad hoc mechanism. The findings also lead to the discovery of the following attributes: faster, less procedural, cost effective and enforceable; regulation and government's support; professionalism and ethic; training; and facility, that may promote a successful implementation of dispute resolution and ADR in Malaysia.

First experiences with apartment buildings built in monolithic construction to Passivhaus standard; Erste Erfahrungen mit Mehrfamilien-Passivhaeusern in monolithischer Bauweise

Energy Technology Data Exchange (ETDEWEB)

Messari-Becker, Lamia; Bollinger, Klaus; Grohmann, Manfred [Bollinger + Grohmann Ingenieure GmbH, Frankfurt am Main (Germany)

2011-02-15

For the first time, apartment buildings are being built in monolithic construction that meet the most exacting requirements regarding energy efficiency and sustainability. These buildings are under construction in the northern district of Kalbach Sued in Frankfurt (Main) by ABG Frankfurt Holding. The architectural design was produced by Scheffler and Partners, the Frankfurt structural engineers Bollinger + Grohmann undertook the structural design including building physics and energy related aspects, and Baumgartner Engineers took charge of M and E design. These apartment buildings are the first monolithically constructed apartment buildings built to Passivhaus standard. They therefore represent a milestone in single-skin monolithic construction in connection with an exacting energy standard. The challenge for architects and engineers was to consider a range of different aspects and accommodate them in the design. In addition to given parameters such as the urban development plan, client requirements such as the number of apartments, aspects of family living and barrier-free standards, the briefing called for the highest construction standard in terms of efficient use of resources in the widest sense. This meant that the emphasis was not only on energy efficiency. Cost efficiency throughout the entire lifecycle of the building was equally as important in order to ensure long term economic sustainability for users and owners. The experience gained on this project will also provide answers to important questions regarding research and development in sustainable building, which is not in any conflict with the creativity and diversity of our architectural culture. (Copyright copyright 2011 Ernst and Sohn Verlag fuer Architektur und technische Wissenschaften GmbH and Co. KG, Berlin)

Knowledge, attitude, and practice of quality standards in small-sized public hospitals, Saudi Arabia

Directory of Open Access Journals (Sweden)

Fahad Khamis Alomari

2015-01-01

Full Text Available Objectives: The aim of this study was to assess current situations in small size hospitals regarding knowledge of staff, their attitude and practice of quality standards, in order to set a plan to improve the current situations and overcome barriers of quality practice. Materials and Methods: A descriptive cross-sectional research was conducted by a validated self-administered questionnaire using systematic random technique. Results: The study included about 37.7% Physicians followed by 28.3% nurses, and 18.8% administrators. Median percentage of participants′ knowledge and attitude scores regarding healthcare quality was 48% and 80% respectively. Meanwhile, the median percentage of participants′ perception toward hospital support and implementation of healthcare quality was 54% and 50% respectively. The main barriers for quality standards implementation and practicing were; staff resistance (84.8% followed by deficient knowledge (81.1%. Knowledge showed significant positive correlation with hospital application of quality standards (P = 0.001. Conclusion: The researcher concluded that improvement of knowledge and attitude toward implementation of quality standards as well as leadership commitment to quality and change management were a critical element for organisational shifting transformation to implementing quality of care. Focusing on small hospital and providing more support with all resources for implementation of quality standards through proper education and training for all staff categories are highly recommended.

The Economic Impact on the Construction Industry of Additional Demands Caused by New Environmental Protection Standards (1972)

Science.gov (United States)

New facilities and additions to existing facilities will be required to meet the EPA's new (early 1970s) environmental quality standards. The report examines extent of these additional demands for construction and their economic impacts.

Development of Australian clinical practice outcome standards for graduates of critical care nurse education.

Science.gov (United States)

Gill, Fenella J; Leslie, Gavin D; Grech, Carol; Boldy, Duncan; Latour, Jos M

2015-02-01

To develop critical care nurse education practice standards. Critical care specialist education for registered nurses in Australia is provided at graduate level. Considerable variation exists across courses with no framework to guide practice outcomes or evidence supporting the level of qualification. An eDelphi technique involved the iterative process of a national expert panel responding to three survey rounds. For the first round, 84 statements, organised within six domains, were developed from earlier phases of the study that included a literature review, analysis of critical care courses and input from health consumers. The panel, which represented the perspectives of four stakeholder groups, responded to two rating scales: level of importance and level of practice. Of 105 experts who agreed to participate, 92 (88%) completed survey round I; 85 (92%) round II; and 73 (86%) round III. Of the 98 statements, 75 were rated as having a high level of importance - median 7 (IQR 6-7); 14 were rated as having a moderate level of importance - median 6 (IQR 5-7); and nine were rated as having a low level of importance - median 4 (IQR 4-6)-6 (IQR 4-6). The majority of the panel rated graduate level of practice as 'demonstrates independently' or 'teaches or supervises others' for 80 statements. For 18 statements, there was no category selected by 50% or more of the panel. The process resulted in the development of 98 practice standards, categorised into three levels, indicating a practice outcome level by the practitioner who can independently provide nursing care for a variety of critically ill patients in most contexts, using a patient- and family-focused approach. The graduate practice outcomes provide a critical care qualification definition for nursing workforce standards and can be used by course providers to achieve consistent practice outcomes. © 2014 John Wiley & Sons Ltd.

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for X-ray computed tomography (CT) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of X-ray computed tomography (CT) imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitio...

STATE POLICY FUNDAMENTALS IN FORMATION OF A NATIONAL STANDARD OF "GREEN CONSTRUCTION" FOR ASSESSMENT OF ITEMS OF REAL PROPERTY

Directory of Open Access Journals (Sweden)

Kolchigin Mikhail Aleksandrovich

2012-12-01

Full Text Available The authors analyze the problem of implementation of principles of "green construction" in the Russian Federation. Despite the availability of the appropriate legislation in the field of environmental safety of construction, there are no legal, social, or economic incentives that may boost development of "green" technologies. Until recently, fundamentals of the state policy in the field of environmental protection of real estate development have not succeeded in motivating market players to implement advanced green technologies. However, recently, the government has begun motivating the construction industry towards the use of "green" technologies. The first activity is aimed at improving the legislation and updating the international voluntary certification according to BREAM and LEED standards. The result is the acceptance of the National Green Building Standard for real estate valuation that will open up new opportunities and prospects to the participants of the construction market. However, at the initial phase of implementation of "Fundamentals of the State Policy in the Field of Environmental Development of the Russian Federation", government authorities should provide their support to proponents of green buildings, including financial inflows.

Standard practice for in situ examination of ferromagnetic Heat-Exchanger tubes using remote field testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice describes procedures to be followed during remote field examination of installed ferromagnetic heat-exchanger tubing for baseline and service-induced discontinuities. 1.2 This practice is intended for use on ferromagnetic tubes with outside diameters from 0.500 to 2.000 in. [12.70 to 50.80 mm], with wall thicknesses in the range from 0.028 to 0.134 in. [0.71 to 3.40 mm]. 1.3 This practice does not establish tube acceptance criteria; the tube acceptance criteria must be specified by the using parties. 1.4 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establ...

Construct validity and internal consistency in the Leisure Practices Scale (EPL) for adults.

Science.gov (United States)

Andrade, Rubian Diego; Schwartz, Gisele Maria; Tavares, Giselle Helena; Pelegrini, Andreia; Teixeira, Clarissa Stefani; Felden, Érico Pereira Gomes

2018-02-01

This study proposes and analyzes the construct validity and internal consistency of the Leisure Practices Scale (EPL). This survey seeks to identify the preferences and involvement in in different leisure practices in adults. The instrument was formed based on the cultural leisure content (artistic, manual, physical, sports, intellectual, social, tourist, virtual and contemplation/leisure). The validation process was conducted with: a) content analysis by leisure experts, who evaluated the instrument for clarity of language and practical relevance, which allowed the calculation of the content validity coefficient (CVC); b) reproducibility test-retest with 51 subjects to calculate the temporal variation coefficient; c) internal consistency analysis with 885 participants. The evaluation presented appropriate coefficients, both with respect to language clarity (CVCt = 0.883) and practical relevance (CVCt = 0.879). The reproducibility coefficients were moderate to excellent. The scale showed adequate internal consistency (0.72). The EPL has psychometric quality and acceptable values in its structure, and can be used to investigate adult involvement in leisure activities.

Sustainable construction: construction and demolition waste reconsidered.

Science.gov (United States)

del Río Merino, Mercedes; Izquierdo Gracia, Pilar; Weis Azevedo, Isabel Salto

2010-02-01

Construction activity in Europe has increased substantially in the past decade. Likewise, there has also been a commensurate rise in the generation of construction and demolition waste (C&DW). This, together with the fact that in many European countries the rate of recycling and reuse of C&DW is still quite low has engendered a serious environmental problem and a motivation to develop strategies and management plans to solve it. Due to its composition, there is a significant potential to reuse and/or recycle C&DW, and thereby, contribute to improving the sustainability of construction and development, but practical procedures are not yet widely known or practiced in the construction industry. This article (a) summarizes the different applications that are presently practiced to optimize the recovery and/or application of C&DW for reuse, and (b) proposes various measures and strategies to improve the processing of this waste. The authors suggest that to enhance environmental effectiveness, a conscious and comprehensive C&DW management plan should be implemented in each jurisdiction. More precisely, this study presents a holistic approach towards C&DW management, through which environmental benefits can be achieved through the application of new construction methods that can contribute to sustainable growth.

Investigating Assessment Bias for Constructed Response Explanation Tasks: Implications for Evaluating Performance Expectations for Scientific Practice

Science.gov (United States)

Federer, Meghan Rector

frequently incorporate multivalent concepts into explanations of change, resulting in explanatory practices that were scientifically non-normative. However, use of follow-up question approaches was found to resolve this source of bias and thereby increase the validity of inferences about student understanding. The second study focused on issues of item and instrument structure, specifically item feature effects and item position effects, which have been shown to influence measures of student performance across assessment tasks. Results indicated that, along the instrument item sequence, items with similar surface features produced greater sequencing effects than sequences of items with dissimilar surface features. This bias could be addressed by use of a counterbalanced design (i.e., Latin Square) at the population level of analysis. Explanation scores were also highly correlated with student verbosity, despite verbosity being an intrinsically trivial aspect of explanation quality. Attempting to standardize student response length was one proposed solution to the verbosity bias. The third study explored gender differences in students' performance on constructed-response explanation tasks using impact (i.e., mean raw scores) and differential item function (i.e., item difficulties) patterns. While prior research in science education has suggested that females tend to perform better on constructed-response items, the results of this study revealed no overall differences in gender achievement. However, evaluation of specific item features patterns suggested that female respondents have a slight advantage on unfamiliar explanation tasks. That is, male students tended to incorporate fewer scientifically normative concepts (i.e., key concepts) than females for unfamiliar taxa. Conversely, females tended to incorporate more scientifically non-normative ideas (i.e., naive ideas) than males for familiar taxa. Together these results indicate that gender achievement differences for this

Asbestos Standard for the Construction Industry

National Research Council Canada - National Science Library

1995-01-01

.... In the construction industry, asbestos is found in installed products such as shingles, floor tiles, cement pipe and sheet, roofing felts, insulation, ceiling tiles, fire-resistant drywall, and acoustical products...

Best practices in selecting performance measures and standards for effective asset management.

Science.gov (United States)

2011-06-01

"This report assesses and provides guidance on best practices in performance measurement, management and standards : setting for effective Transportation Asset Management (TAM). The study is conducted through a literature review, a : survey of the 50...

Theory and practice in the construction of professional identity in nursing students: a qualitative study.

Science.gov (United States)

Arreciado Marañón, Antonia; Isla Pera, Ma Pilar

2015-07-01

The problem of nurses' professional identity continues to be seen in the disjunction between theoretical training and clinical placements. Moreover, it is not known how nursing students perceive these contradictions or how this discrepancy influences the construction of professional identity. To gain insight into nursing students' perception of their theoretical and practical training and how this training influences the process of constructing their professional identity. Qualitative, ethnographic study. Third-year nursing students at the l'Escola Universitària d'Infermeria Vall d'Hebron de Barcelona. Participant observation was conducted in the hospital setting and primary care. Discussion groups were held. The constant comparative method was used for the analysis. The study adhered to the criteria of credibility, transferability, dependability and confirmability. Students believed that both theoretical and practical trainings were indispensable. Nevertheless, clinical placements were considered essential to confer sense to the theory and to shape their identity, as they helped student nurses to experience their future professional reality and to compare it with what they had been taught in theoretical and academic classes. The role of the clinical placement mentor was essential. With regard to theory, the skills developed in problem-based learning gave novice nurses' confidence to approach the problems of daily practice and new situations. Equally, this approach taught them to reflect on what they did and what they were taught and this ability was transferred to the clinical setting. For students, both strategies (theory and practice) are vital to nursing education and the construction of a professional identity, although pride of place is given to clinical placements and mentors. The skills developed with problem-based learning favor active and reflective learning and are transferred to learning in the clinical setting. Copyright © 2015 Elsevier Ltd. All

Teaching through 10,000 Earthquakes: Constructive Practice for Instructors in a Post-Disaster Environment

Science.gov (United States)

Wright, Sarah; Wordsworth, Russell

2013-01-01

The authors describe their experiences of teaching through a series of major earthquakes and the lessons learned regarding sustaining teaching and learning through an ongoing natural disaster. Student feedback data from across the university is analyzed to generate a model of constructive practice for instructors responding to a crisis. The…

Arctic pipeline planning design, construction, and equipment

CERN Document Server

Singh, Ramesh

2013-01-01

Utilize the most recent developments to combat challenges such as ice mechanics. The perfect companion for engineers wishing to learn state-of-the-art methods or further develop their knowledge of best practice techniques, Arctic Pipeline Planning provides a working knowledge of the technology and techniques for laying pipelines in the coldest regions of the world. Arctic Pipeline Planning provides must-have elements that can be utilized through all phases of arctic pipeline planning and construction. This includes information on how to: Solve challenges in designing arctic pipelines Protect pipelines from everyday threats such as ice gouging and permafrost Maintain safety and communication for construction workers while supporting typical codes and standards Covers such issues as land survey, trenching or above ground, environmental impact of construction Provides on-site problem-solving techniques utilized through all phases of arctic pipeline planning and construction Is packed with easy-to-read and under...

10 CFR Appendix N to Part 52 - Standardization of Nuclear Power Plant Designs: Combined Licenses To Construct and Operate...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Standardization of Nuclear Power Plant Designs: Combined Licenses To Construct and Operate Nuclear Power Reactors of Identical Design at Multiple Sites N Appendix N... FOR NUCLEAR POWER PLANTS Pt. 52, App. N Appendix N to Part 52—Standardization of Nuclear Power Plant...

CONSTRUCTION CONTRACTS ACT (2013): IMPLICATIONS OF THE ACT FOR THE PRACTICING QUANTITY SURVEYOR. A COMPANY BASED INVESTIGATION

OpenAIRE

Byrne, Roy

2017-01-01

Abstract The Construction Contracts Act 2013 was introduced into the Irish construction industry for the primary benefit of the sub-contractors, and to address their exposure to the poor payment practices that were prevalent in the industry. The Act was introduced in the Seanad by Senator Feargal Quinn in May 2010, as a private member’s bill. It was enacted on 29th July 2013 and recently came into effect on the 25th July 2016. The Act seeks to regulate payments under construction contra...

A proposal for improving sustainability practice through the implementations of reuse and recycle technique in Malaysian construction industry

Science.gov (United States)

Osman, Wan Nadzri; Nawi, Mohd Nasrun Mohd; Saad, Rohaizah; Anuar, Herman Shah; Ibrahim, Siti Halipah

2016-08-01

Construction and demolition waste is often seen as the major contributor to the solid waste stream that is going to landfill, hence, making it the area of focus for improvement. In the construction industry, reuse and recycle principles have been promoted in order to reduce waste and protect the environment. Construction and demolition waste including demolished concrete, bricks and masonry, wood and other materials such as dry wall, glass, insulation, roofing, wire, pipe, rock and soil constitute a significant component of the total waste. Without proper reuse and recycle policies, these construction and demolition wastes would quickly fill all the remaining landfill space, which has already been growing in scarce around this region. Based on the feedback received, on average, a third of respondents said they currently have a lotto benefit from the use of reduce and reuse. In addition, they also agreed that the existing policies help and support the min carrying out the reduce and reuse practices. Respondents also agreed that other stakeholders in the construction industry currently have an excellent awareness in term of implementation of the reduce and reuse in their practices.

Some nonscientific influences on radiation protection standards and practice

International Nuclear Information System (INIS)

Taylor, L.S.

1980-01-01

The theme of this lecture is that we have sufficient knowledge about the biomedical effects of ionizing radiation for adequate radiation protection but the problem of controlling radiation uses is complicated by philosophical, sociological, political, economic and moral considerations. The scientific problem of 'thresholds' and some nonscientific factors which may influence protection practices and hence influence the setting of numerical protection standards are discussed. The influence of the media on public opinion and the need for public education is stressed. (U.K.)

CORR Guidelines. Preparing and Conducting Review Missions of Construction Project Readiness for Nuclear Power Plants

International Nuclear Information System (INIS)

2013-01-01

The construction readiness review (CORR) mission for nuclear power plant projects has been established with the aim of conducting peer reviews of construction projects related to nuclear power plants. Such a mission provides a detailed assessment of readiness for construction, construction progress, readiness for turnover, as well as recommendations for improvement. Organizations in Member States, such as nuclear utilities, owners, regulators and technical support organizations, can benefit from such reviews. A team of international experts with complementing specialities will conduct the CORR mission. The review is based on appropriate IAEA publications, such as IAEA Safety Standards Series Guides and IAEA Nuclear Energy Series publications, as well as on internationally recognized project and construction management guides. Mission findings are summarized in a mission report, which includes a list of recommendations, suggestions and identified good practices. The review is not intended to be a regulatory inspection or an audit against international codes and standards. Rather, it is a peer review aimed at improving implementation processes and procedures through an exchange of technical experiences and practices at the working level. The mission is applicable at any stage of a nuclear power plant construction project, although two specific phases are targeted: (1) start of construction mission (Phase 1 mission) and (2) an in-progress mission (Phase 2 mission). Missions are initiated when official requests are submitted by Member States through the appropriate IAEA channels

Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

Energy Technology Data Exchange (ETDEWEB)

McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

2008-07-25

Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption.

Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

International Nuclear Information System (INIS)

McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

2008-01-01

Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption

Chapter 6. Operation of electrolytic cell in standard operating practices

International Nuclear Information System (INIS)

Yanko, E.A.; Kabirov, Sh.O.; Safiev, Kh.; Azizov, B.S.; Mirpochaev, Kh.A.

2011-01-01

This chapter is devoted to operation of electrolytic cell in standard operating practices. Therefore, the electrolyte temperature, the composition of electrolyte, including the level of metals was considered. The regulation of electrolyte composition by liquidus temperature and electrolyte overheating was studied. Damping of anode effects was studied as well. Maintenance of electrolytic cells was described. Heat and energy balances of aluminium electrolytic cells were considered.

Change in ranking order of prescribing patterns by age and sex standardization of the practice population--audit may be misleading

DEFF Research Database (Denmark)

Olesen, Frede; Vedsted, Peter; Nielsen, Jørgen Nørskov

1996-01-01

OBJECTIVE: To demonstrate whether standardization of practice populations by age and sex changes the internal prescription ranking order of a group of practices. DESIGN: Data on the prescribing of cardiovascular drugs in a group of practices were obtained from a county-based database. Information...... on the age, sex, and numbers of patients per practice was also obtained. The direct standardization method was used to adjust practice populations for age and sex. SETTING: The town of Randers, Aarhus County, Denmark. SUBJECTS: 35 practices, 41 GPs. MAIN OUTCOME MEASURES: Ranking of the 35 practices...... of the practices. Only four practices did not change ranking position, while four moved more than ten places. The slope between highest and lowest ranked practice did not diminish after standardization. CONCLUSION: Care should be taken when comparing peer prescribing patterns from crude utilization data, and we...

Introduction to gauge theories and the Standard Model

CERN Document Server

de Wit, Bernard

1995-01-01

The conceptual basis of gauge theories is introduced to enable the construction of generic models.Spontaneous symmetry breaking is dicussed and its relevance for the renormalization of theories with massive vector field is explained. Subsequently a d standard model. When time permits we will address more practical questions that arise in the evaluation of quantum corrections.

Standard practice for examination of fiberglass reinforced plastic fan blades using acoustic emission

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice provides guidelines for acoustic emission (AE) examinations of fiberglass reinforced plastic (FRP) fan blades of the type used in industrial cooling towers and heat exchangers. 1.2 This practice uses simulated service loading to determine structural integrity. 1.3 This practice will detect sources of acoustic emission in areas of sensor coverage that are stressed during the course of the examination. 1.4 This practice applies to examinations of new and in-service fan blades. 1.5 This practice is limited to fan blades of FRP construction, with length (hub centerline to tip) of less than 3 m [10 ft], and with fiberglass content greater than 15 % by weight. 1.6 AE measurements are used to detect emission sources. Other nondestructive examination (NDE) methods may be used to evaluate the significance of AE sources. Procedures for other NDE methods are beyond the scope of this practice. 1.7 Units—The values stated in either SI units or inch-pound units are to be regarded separately as sta...

40 CFR Table 36 to Subpart Uuu of... - Work Practice Standards for HAP Emissions From Bypass Lines

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Work Practice Standards for HAP Emissions From Bypass Lines 36 Table 36 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL..., Table 36 Table 36 to Subpart UUU of Part 63—Work Practice Standards for HAP Emissions From Bypass Lines...

78 FR 49714 - Amendment to Standards and Practices for All Appropriate Inquiries

Science.gov (United States)

2013-08-15

... standard or customary business practice, to comply with a federal regulation. Today's proposed action does... personal information provided, unless the comment includes information claimed to be Confidential Business...-566-2745, or [email protected] . SUPPLEMENTARY INFORMATION I. Regulated Entities Today's action...

[Healthcare professionals' knowledge, attitudes and practices in relation to standard hospital precautions].

Science.gov (United States)

Mandana Bambenongama, Norbert; Losimba Likwela, Joris

2013-01-01

The infectious risk in the healthcare setting is potentially ubiquitous. Several infectious agents may be transmitted to healthcare professionals, most of which are carried by blood and body fluids. The aim of this study was to assess knowledge, attitudes and practices of healthcare workers in delivery rooms and operating theatres about standard precautions in healthcare settings in order to deduce the actions to be implemented to improve their security. A descriptive cross-sectional survey was conducted in September 2011. A questionnaire was sent to 96 people using the direct interview technique. Only 20% of study subjects were familiar with the main bloodborne viruses (HBV, HCV and HIV). 67.8% of them considered that standard precautions must be applied only to women in labour and suspected HIV-positive patients. Almost all respondents (91.1%) had already been subject to at least one AES during the last 12 months. Respondents appeared to have a poor knowledge of the recommended actions following an AES. Recapping of needles after care is a practice reported by 55.6% of respondents. Routine use of protective barriers is unsatisfactory. The frequent failure of systematic application of standard precautions in healthcare settings by healthcare workers in the city of Isiro should lead the Ministry of Health to implement a process designed to increase awareness about standard precautions and improve the equipment necessary for strict compliance with these precautions.

Practical silicon Light emitting devices fabricated by standard IC technology

International Nuclear Information System (INIS)

Aharoni, H.; Monuko du Plessis; Snyman, L.W.

2004-01-01

Full Text:Research activities are described with regard to the development of a comprehensive approach for the practical realization of single crystal Silicon Light Emitting Devices (Si-LEDs). Several interesting suggestions for the fabrication of such devices were made in the literature but they were not adopted by the semiconductor industry because they involve non-standard fabrication schemes, requiring special production lines. Our work presents an alternative approach, proposed and realized in practice by us, permitting the fabrication of Si-LEDs using the standard conventional fully industrialized IC technology ''as is'' without any adaptation. It enables their fabrication in the same production lines of the presently existing IC industry. This means that Si-LEDs can now be fabricated simultaneously with other components, such as transistors, on the same silicon chip, using the same masks and processing procedures. The result is that the yield, reliability, and price of the above Si-LEDs are the same as the other Si devices integrated on the same chip. In this work some structural details of several practical Si-LED's designed by us, as well as experimental results describing their performance are presented. These Si-LED's were fabricated to our specifications utilizing standard CMOS/BiCMOS technology, a fact which comprises an achievement by itself. The structure of the Si-LED's, is designed according to specifications such as the required operating voltage, overall light output intensity, its dependence(linear, or non-linear) on the input signal (voltage or current), light generations location (bulk, or near-surface), the emission pattern and uniformity. Such structural design present a problem since the designer can not use any structural parameters (such as doping levels and junction depths for example) but only those which already exist in the production lines. Since the fabrication procedures in these lines are originally designed for processing of

75 FR 60616 - Commission Guidance Regarding Auditing, Attestation, and Related Professional Practice Standards...

Science.gov (United States)

2010-10-01

... Regarding Auditing, Attestation, and Related Professional Practice Standards Related To Brokers and Dealers... Oversight Board in the Dodd-Frank Wall Street Reform and Consumer Protection Act to establish auditing... 60617

Standard practice for preparation and use of direct tension stress-corrosion test specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

1985-01-01

1.1 This practice covers procedures for designing, preparing, and using ASTM standard tension test specimens for investigating susceptibility to stress-corrosion cracking. Axially loaded specimens may be stressed quantitatively with equipment for application of either a constant load, constant strain, or with a continuously increasing strain. 1.2 Tension test specimens are adaptable for testing a wide variety of product forms as well as parts joined by welding, riveting, or various other methods. 1.3 The exposure of specimens in a corrosive environment is treated only briefly because other standards are being prepared to deal with this aspect. Meanwhile, the investigator is referred to Practices G35, G36, G37, and G44, and to ASTM Special Technical Publication 425 (1).

Putting into practice error management theory: Unlearning and learning to manage action errors in construction.

Science.gov (United States)

Love, Peter E D; Smith, Jim; Teo, Pauline

2018-05-01

Error management theory is drawn upon to examine how a project-based organization, which took the form of a program alliance, was able to change its established error prevention mindset to one that enacted a learning mindfulness that provided an avenue to curtail its action errors. The program alliance was required to unlearn its existing routines and beliefs to accommodate the practices required to embrace error management. As a result of establishing an error management culture the program alliance was able to create a collective mindfulness that nurtured learning and supported innovation. The findings provide a much-needed context to demonstrate the relevance of error management theory to effectively address rework and safety problems in construction projects. The robust theoretical underpinning that is grounded in practice and presented in this paper provides a mechanism to engender learning from errors, which can be utilized by construction organizations to improve the productivity and performance of their projects. Copyright © 2018 Elsevier Ltd. All rights reserved.

Standard practice for sampling special nuclear materials in multi-container lots

CERN Document Server

American Society for Testing and Materials. Philadelphia

1987-01-01

1.1 This practice provides an aid in designing a sampling and analysis plan for the purpose of minimizing random error in the measurement of the amount of nuclear material in a lot consisting of several containers. The problem addressed is the selection of the number of containers to be sampled, the number of samples to be taken from each sampled container, and the number of aliquot analyses to be performed on each sample. 1.2 This practice provides examples for application as well as the necessary development for understanding the statistics involved. The uniqueness of most situations does not allow presentation of step-by-step procedures for designing sampling plans. It is recommended that a statistician experienced in materials sampling be consulted when developing such plans. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standar...

Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers a procedure for recording data of atmospheric corrosion tests of metallic-coated steel specimens. Its objective is the assurance of (1) complete identification of materials before testing, (2) objective reporting of material appearance during visual inspections, and (3) adequate photographic, micrographic, and chemical laboratory examinations at specific stages of deterioration, and at the end of the tests. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

"Judging a body by its cover": young Lebanese-Canadian women's discursive constructions of the "healthy" body and "health" practices.

Science.gov (United States)

Abou-Rizk, Zeina; Rail, Geneviève

2014-02-01

Our interest stems from the dramatic increase in the number of obesity studies, which expose Canadian women to a huge amount of information that links health to weight. Using feminist poststructuralist and postcolonial lenses, this paper investigates young Lebanese-Canadian women's constructions of the body and "health" practices within the context of the dominant obesity discourse. Participant-centered conversations were held with 20 young Christian Lebanese-Canadian women. A thematic analysis was first conducted and was followed by a poststructuralist discourse analysis to further our understanding of how the participants construct themselves as subjects within various discourses surrounding health, obesity, and the body. Our findings reveal that most participants conflate the "healthy" body and the "ideal" body, both of which they ultimately portray as thin. The young women construct the "healthy"/"ideal" body as a solely individual responsibility, thus reinforcing the idea of "docile bodies." The majority of participants report their frequent involvement in disciplinary practices such as rigorous physical activity and dietary restrictions, and a few young women mention the use of other extreme forms of bodily monitoring such as detoxes, dieting pills, and compulsive exercise. We discuss the language employed by participants to construct their multiple and shifting subjectivities. For instance, many of these Lebanese-Canadian women use the term "us" to dissociate themselves from Lebanese women ("them"), whom they portray as overly focused on thinness and beauty and engaged in physical activity and other bodily practices for "superficial" purposes. The participants also use the "us/them" trope to distance themselves from "Canadian" women (read: white Euro-Canadian women), whom they portray as very physically active for purposes beyond the improvement of the physical appearance of the body. We discuss the impacts of the young Christian Lebanese-Canadian women

78 FR 49690 - Amendment to Standards and Practices for All Appropriate Inquiries

Science.gov (United States)

2013-08-15

... business practice, in complying with a federal regulation. Today's action does not require any person to... includes information claimed to be Confidential Business Information (CBI) or other information whose... Entities Today's action offers certain parties the option of using an available industry standard to...

an appraisal of construction management practice in nigeria

African Journals Online (AJOL)

user

Keywords: Construction Project, Management tools, Project delivery, Construction Industry, Nigeria. 1. ..... developing country” International Journal of Project. Management, Vol. 18, Number 3 ... Construction Industry Perspective”, Building &.

Concrete and steel construction quality control and assurance

CERN Document Server

El-Reedy, Mohamed A

2014-01-01

Starting with the receipt of materials and continuing all the way through to the final completion of the construction phase, Concrete and Steel Construction: Quality Control and Assurance examines all the quality control and assurance methods involving reinforced concrete and steel structures. This book explores the proper ways to achieve high-quality construction projects, and also provides a strong theoretical and practical background. It introduces information on quality techniques and quality management, and covers the principles of quality control. The book presents all of the quality control and assurance protocols and non-destructive test methods necessary for concrete and steel construction projects, including steel materials, welding and mixing, and testing. It covers welding terminology and procedures, and discusses welding standards and procedures during the fabrication process, as well as the welding codes. It also considers the total quality management system based on ISO 9001, and utilizes numer...

Constructing Assessment Model of Primary and Secondary Educational Quality with Talent Quality as the Core Standard

Science.gov (United States)

Chen, Benyou

2014-01-01

Quality is the core of education and it is important to standardization construction of primary and secondary education in urban (U) and rural (R) areas. The ultimate goal of the integration of urban and rural education is to pursuit quality urban and rural education. Based on analysing the related policy basis and the existing assessment models…

Cost of and soil loss on "minimum-standard" forest truck roads constructed in the central Appalachians

Science.gov (United States)

J. N. Kochenderfer; G. W. Wendel; H. Clay Smith

1984-01-01

A "minimum-standard" forest truck road that provides efficient and environmentally acceptable access for several forest activities is described. Cost data are presented for eight of these roads constructed in the central Appalachians. The average cost per mile excluding gravel was $8,119. The range was $5,048 to $14,424. Soil loss was measured from several...

Occupational health and safety issues in the informal economic segment of Pakistan: a survey of construction sites.

Science.gov (United States)

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan; Usman, Ahmad; Nawaz, Muhammad Musarrat; Nazir, Mian Sajid

2018-06-01

This research covers the current status of occupational health and safety (OHS)-related practices in the informal construction segment of Pakistan. Data were collected, through interviews, from 316 construction sites employing 3577 workers. The results of the study reveal that both employers and workers lack knowledge of OHS laws/standards and no practices of this nature are enacted at these construction sites. Alarmingly, work-related accidents, whenever they happen, are not given due attention and there is no formal injury-report system. The informal construction industry employs a huge portion of the informal workforce, and lack of OHS happens at tremendous human cost. These research findings may thus play their role in strengthening the case for reforms in the sector. This study, if properly utilized, may also enable employers of the sector by increasing their knowledge about OHS practices and, as a result, trying to offer safer environments for their workers.

Constructing an Ethical Training for Advanced Nursing Practice: An Interactionist and Competency-Based Approach.

Science.gov (United States)

Pariseau-Legault, Pierre; Lallier, Melisa

2016-07-01

Advanced practice nurses are working in a highly interdisciplinary and political context. Such situations can influence the deliberative and ethical decision-making processes in which they are also involved. This can subsequently compromise their abilities to protect their moral integrity, to find innovative and nondualistic solutions to complex ethical problems, and to collaborate with other health professionals. The authors constructed a training program inspired by discourse and narrative ethics. The objective pursued was to develop advanced practice nurses' moral integrity, highlight the ethical component of their clinical judgement, and foster the development of their deliberative competencies. The pedagogical process proposed exposes how an ethical curriculum adapted to the context in which advanced practice nurses evolve can address power relationships inherent in ethical decision making. The authors suggest that this pedagogical approach has the potential to optimize the consolidation of ethical, reflective, and deliberative competencies among advanced practice nurses. [J Nurs Educ. 2016;55(7):399-402.]. Copyright 2016, SLACK Incorporated.

ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

Directory of Open Access Journals (Sweden)

Nafees Ahmed Memon

2011-04-01

Full Text Available Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The construction companies of developing countries have reaped many advantages from the effective implementation of ISO standards. The rate of adoption of ISO standards has remained slow in the construction sector of some developing countries like Pakistan. This paper presents the literature review of ISO in global construction industry. It highlights the advantages, disadvantages and barriers faced by construction companies in the implementation of ISO standards. This study also investigates the level of adoption of ISO standards in construction and manufacturing companies of Pakistan through a questionnaire survey. It presents the comparison of ISO standards\\\\\\' adoption in both construction and manufacturing sectors. The paper puts forward some suggestions and recommendation for the better adoption and improvement of ISO implementation in the construction sector of Pakistan. This study emphasizes that construction companies of Pakistan should learn from the benefits reaped by the construction companies of developed countries and take appropriate measures for implementing ISO standards. It also suggests that public sector clients should make it obligatory for the contractors and consultants to have ISO certification before awarding the works in order to enhance the the adoption of ISO standards in construction sector.

Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers the methodology, summarized in Annex A1, to be used in the analysis and interpretation of neutron exposure data obtained from LWR pressure vessel surveillance programs; and, based on the results of that analysis, establishes a formalism to be used to evaluate present and future condition of the pressure vessel and its support structures (1-70). 1.2 This practice relies on, and ties together, the application of several supporting ASTM standard practices, guides, and methods (see Master Matrix E 706) (1, 5, 13, 48, 49). In order to make this practice at least partially self-contained, a moderate amount of discussion is provided in areas relating to ASTM and other documents. Support subject areas that are discussed include reactor physics calculations, dosimeter selection and analysis, and exposure units. Note 1—(Figure 1 is deleted in the latest update. The user is refered to Master Matrix E 706 for the latest figure of the standards interconnectivity). 1.3 This practice is restri...

A Standardized Shift Handover Protocol: Improving Nurses’ Safe Practice in Intensive Care Units

Directory of Open Access Journals (Sweden)

Javad Malekzadeh

2013-08-01

Full Text Available Introduction: For maintaining the continuity of care and improving the quality of care, effective inter-shift information communication is necessary. Any handover error can endanger patient safety. Despite the importance of shift handover, there is no standard handover protocol in our healthcare settings. Methods In this one-group pretest-posttest quasi-experimental study conducted in spring and summer of 2011, we recruited a convenience sample of 56 ICU nurses. The Nurses’ Safe Practice Evaluation Checklist was used for data collection. The Content Validity Index and the inter-rater correlation coefficient of the checklist was 0.92 and 89, respectively. We employed the SPSS 11.5 software and the Mc Nemar and paired-samples t test for data analysis. Results: Study findings revealed that nurses’ mean score on the Safe Practice Evaluation Checklist increased significantly from 11.6 (2.7 to 17.0 (1.8 (P < 0.001. Conclusion: using a standard handover protocol for communicating patient’s needs and information improves nurses’ safe practice in the area of basic nursing care.

Technical bases for regulatory review; comparison of practices, standards and guides

International Nuclear Information System (INIS)

Vinck, W.; Naurer, H.; Van Reijen, G.

1979-01-01

In first place, national licensing and regulatory scenes are presentd, as well as correlations between: a) Correlations and industrial standards; b) national and international developments. The purpose of harmonisation efforts and ongoing activities, especially within the EC, are highlighted. For the purpose of being sufficiently specific, three specific areas are dealt with as examples, explaining how actual application of practices and criteria in EC Member States correlate (or not) to one another including the points of convergence and divergences: protection against aircraft crash, seismic effects, protection against fuel handling accidents. Conclusive remarks deal with the origin in and relative importance of discrepancies in safety practices and criteria. (author)

Integration of Information Literacy into the Curriculum: Constructive Alignment from Theory into Practice

Directory of Open Access Journals (Sweden)

Claes Dahlqvist

2016-12-01

Full Text Available Librarian-teacher cooperation is essential for the integration of information literacy into course syllabi. Therefore, a common theoretical and methodological platform is needed. As librarians at Kristianstad University we have had the opportunity to develop such a platform when teaching information literacy in a basic course for teachers in higher education pedagogy. Information literacy is taught in context with academic writing, distance learning and teaching, and development of course syllabi. Constructive Alignment in Theory: We used constructive alignment in designing our part of the course. John Biggs’ ideas tell us that assessment tasks (ATs should be aligned to what is intended to be learned. Intended learning outcomes (ILOs specify teaching/learning activities (TLAs based on the content of learning. TLAs should be designed in ways that enable students to construct knowledge from their own experience. The ILOs for the course are to have arguments for the role of information literacy in higher education and ideas of implementing them in TLAs. The content of learning is for example the concept of information literacy, theoretical perspectives and constructive alignment for integration in course syllabi. TLAs are written pre-lecture reflections on the concept of information literacy, used as a starting point for the three-hour seminar. Learning reflections are written afterwards. The AT is to revise a syllabus (preferably using constructive alignment for a course the teacher is responsible for, where information literacy must be integrated with the other parts and topics of the course. Constructive Alignment in Practice: Using constructive alignment has taught us that this model serves well as the foundation of the theoretical and methodological platform for librarian-teacher cooperation when integrating information literacy in course syllabi. It contains all important aspects of the integration of information literacy in course

COMPARISON OF TRENDS IN RISK MANAGEMENT THEORY AND PRACTICES WITHIN THE CONSTRUCTION INDUSTRY

OpenAIRE

Dena Crnković; Mladen Vukomanović

2016-01-01

This study considered the problem of understanding and use of risk management methods in construction projects and their representation in the literature and their practical application. Research of trends in risk management was conducted using studies from the EBSCO database that were published in the period from 1999 to 2015. The focus included the development of two terms, namely traditional and holistic approach to risk management as well as to uncertainty and opportunity management. The ...

Change in ranking order of prescribing patterns by age and sex standardization of the practice population--audit may be misleading

DEFF Research Database (Denmark)

Olesen, Frede; Vedsted, Peter; Nielsen, Jørgen Nørskov

1996-01-01

on the age, sex, and numbers of patients per practice was also obtained. The direct standardization method was used to adjust practice populations for age and sex. SETTING: The town of Randers, Aarhus County, Denmark. SUBJECTS: 35 practices, 41 GPs. MAIN OUTCOME MEASURES: Ranking of the 35 practices......OBJECTIVE: To demonstrate whether standardization of practice populations by age and sex changes the internal prescription ranking order of a group of practices. DESIGN: Data on the prescribing of cardiovascular drugs in a group of practices were obtained from a county-based database. Information...

The Use of Leadership Standards in the Hiring Practices of Effective Principals

Science.gov (United States)

Strange, Martha A.; Hensley, Melissa A.; Kracht, Ritchie E.

2013-01-01

This is a problem based learning project focusing on superintendent use of ISSLC standards in hiring practices for human resource management. Research notes student achievement is affected by effective leadership of principals. School district superintendents charged with hiring effective principals must determine the best candidate for that…

Standard practice for analysis and interpretation of physics dosimetry results for test reactors

International Nuclear Information System (INIS)

Anon.

1984-01-01

This practice describes the methodology summarized in Annex Al to be used in the analysis and interpretation of physics-dosimetry results from test reactors. This practice relies on, and ties together, the application of several supporting ASTM standard practices, guides, and methods that are in various stages of completion (see Fig. 1). Support subject areas that are discussed include reactor physics calculations, dosimeter selection and analysis, exposure units, and neutron spectrum adjustment methods. This practice is directed towards the development and application of physics-dosimetrymetallurgical data obtained from test reactor irradiation experiments that are performed in support of the operation, licensing, and regulation of LWR nuclear power plants. It specifically addresses the physics-dosimetry aspects of the problem. Procedures related to the analysis, interpretation, and application of both test and power reactor physics-dosimetry-metallurgy results are addressed in Practice E 853, Practice E 560, Matrix E 706(IE), Practice E 185, Matrix E 706(IG), Guide E 900, and Method E 646

Learning progressions from a sociocultural perspective: response to "co-constructing cultural landscapes for disciplinary learning in and out of school: the next generation science standards and learning progressions in action"

Science.gov (United States)

Tytler, Russell

2016-10-01

This article discusses a case for a different, socio-cultural way of looking at learning progressions as treated in the next generation science standards (NGSS) as described by Ralph Cordova and Phyllis Balcerzak's paper "Co-constructing cultural landscapes for disciplinary learning in and out of school: the next generation science standards and learning progressions in action". The paper is interesting for a number of reasons, and in this response I will identify different aspects of the paper and link the points made to my own research, and that of colleagues, as complementary perspectives. First, the way that the science curriculum is conceived as an expanding experience that moves from the classroom into the community, across subjects, and across time, links to theoretical positions on disciplinary literacies and notions of learning as apprenticeship into the discursive tools, or `habits of mind' as the authors put it, that underpin disciplinary practice. Second, the formulation of progression through widening communities of practice is a strong feature of the paper, and shows how children take on the role of scientists through this expanding exposure. I will link this approach to some of our own work with school—community science partnerships, drawing on the construct of boundary crossing to tease out relations between school science and professional practice. Third, the demonstration of the expansion of the children's view of what scientists do is well documented in the paper, illustrated by Figure 13 for instance. However I will, in this response, try to draw out and respond to what the paper is saying about the nature of progression; what the progression consists of, over what temporal or spatial dimensions it progresses, and how it can productively frame curriculum processes.

10 CFR Appendix N to Part 50 - Standardization of Nuclear Power Plant Designs: Permits To Construct and Licenses To Operate...

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Standardization of Nuclear Power Plant Designs: Permits To Construct and Licenses To Operate Nuclear Power Reactors of Identical Design at Multiple Sites N Appendix N... FACILITIES Pt. 50, App.N Appendix N to Part 50—Standardization of Nuclear Power Plant Designs: Permits To...

American National Standard administrative practices for nuclear criticality safety, ANSI/ANS-8.19

International Nuclear Information System (INIS)

Smith, D.R.; Carson, R.W.

1991-01-01

American National Standard Administrative Practices for Nuclear Criticality Safety, ANSI/ANS-8.19, provides guidance for the administration of an effective program to control the risk of nuclear criticality in operations with fissile material outside reactors. The several sections of the standard address the responsibilities of management, supervisory personnel, and the criticality safety staff, as well as requirements and suggestions for the content of operating procedures, process evaluations, material control procedures, and emergency procedures

AP1000 shield building: a constructability challenge

International Nuclear Information System (INIS)

Di Giuseppe, Giovanni; Bonanno, Domenico

2010-01-01

The AP1000 Shield Building, an enhanced structure which surrounds the containment vessel, consists of standard Reinforced Concrete (RC) and composite Steel and Concrete (SC) construction. In the SC module the surface steel plates, (with attached shear studs and angles) filled with concrete, act as the steel reinforcement in concrete. This is a relatively new design technology that required the appropriate use of structural codes, supplemented with information from applicable tests on similar composite steel and concrete construction. Being a newer design concept, existing codes do not provide explicit guidance on SC construction so a review of literature and test data on composite structures similar to AP1000 shield building was done in order to confirm the technical basis for the design. The SC walls, air inlet structure and roof of the Shield Building will be constructed using modular construction practices and then transported to site and lifted into place. These modules, working also as permanent form-work, will be filled with high strength Self- Consolidating Concrete. (SCC) This paper provides a focused and integrated presentation of the enhanced shield building design methodology, testing, constructability and inspection. (authors)

Using Google Apps to Develop the Mathematical Practices

Science.gov (United States)

Layton, Rebecca D.; Cady, Jo Ann; Layton, Christopher A.

2017-01-01

Recent recommendations for the teaching of mathematics place an emphasis on the Common Core's Standards for Mathematical Practice (SMP) (CCSSI 2010). The SMPs emphasize constructing viable arguments, critiquing the ideas of others, reasoning abstractly and quantitatively, and using computational procedures. These skills, including the use of…

ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

Energy Technology Data Exchange (ETDEWEB)

Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

1992-06-01

Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

Benchmarks for sustainable construction: A contribution to develop a standard

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, M. [Swiss Federal Labs. for Materials Testing and Research (EMPA), Centre for Energy and Sustainability in Buildings (ZEN), Duebendorf (Switzerland); Althaus, H.-J. [Swiss Federal Labs. for Materials Testing and Research (EMPA), Technology and Society Lab. (TSL), Duebendorf (Switzerland); Haas, A. [Swiss Federal Labs. for Materials Testing and Research (EMPA), Lab. for Energy Systems/Building Equipment, Duebendorf (Switzerland)

2005-11-15

Assessment Report, www.grida.no/climate/ipcc{sub t}ar/]; The demands of the 2000 W society [Leichter leben - Ein Verstandnis fur unsere Ressourcen als Schlussel zu einer nachhaltigen Entwicklung - die 2000-Watt-Gesellschaft (Easier living - understanding our resources as the key to sustainable development - the 2000 Watt society), novatlanis, sia, energieschweiz, January 2005] for the conservation of energy resources. The study shows that buildings designed to the Passive House standard just about comply with the requirements for sustainable construction, provided electricity generation is based largely on renewable or low-CO{sub 2} resources (Swiss power supply mix). The targets are substantially harder to meet where mainly fossil-fuel-generated electricity (European supply mix UCTE) is used. (Author)

Flexible software process lines in practice: A metamodel-based approach to effectively construct and manage families of software process models

DEFF Research Database (Denmark)

Kuhrmann, Marco; Ternité, Thomas; Friedrich, Jan

2017-01-01

Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre-def......: A metamodel-based approach to effectively construct and manage families of software process models [Ku16]. This paper was published as original research article in the Journal of Systems and Software.......Process flexibility and adaptability is frequently discussed, and several proposals aim to improve software processes for a given organization-/project context. A software process line (SPrL) is an instrument to systematically construct and manage variable software processes, by combining pre...... to construct flexible SPrLs and show its practical application in the German V-Modell XT. We contribute a proven approach that is presented as metamodel fragment for reuse and implementation in further process modeling approaches. This summary refers to the paper Flexible software process lines in practice...

Guide to nondestructive assay standards: Preparation criteria, availability, and practical considerations

International Nuclear Information System (INIS)

Hsue, S.T.; Stewart, J.E.; Sampson, T.E.; Butler, G.W.; Rudy, C.R.; Rinard, P.M.

1997-10-01

For certification and measurement control, nondestructive assay (NDA) instruments and methods used for verification measurements of special nuclear materials (SNMs) require calibrations based on certified reference materials (CRMs), or working reference materials (WRMs), traceable to the national system of measurements, and adequately characteristic of the unknowns. The Department of Energy Office of Safeguards and Security is sponsoring production of a comprehensive guide to preparation of NDA standards. The scope of the report includes preparation criteria, current availability of CRMs and WRMs, practical considerations for preparation and characterization, and an extensive bibliography. In preparing the report, based primarily on experience at Los Alamos, they have found that standards preparation is highly dependent on the particular NDA method being applied. They therefore include sections that contain information specific to commonly used neutron and gamma-ray NDA techniques. They also present approaches that are alternatives to, or minimize requirements for physical standards

Nuclear power project construction quality acceptance standards Implementation and discussion

International Nuclear Information System (INIS)

Lai Shifu

2013-01-01

Project quality construction acceptance is an important element of nuclear power project quality management. Based on characteristics of NPP construction and refer to national construction quality acceptance code and industry regulation, this paper introduces and discusses NPP construction quality acceptance regulation improvement and implementation under current situation. (authors)

Pride and Prejudice – Identity and Collaboration in Construction

DEFF Research Database (Denmark)

Thuesen, Christian

2013-01-01

Based on an 18 month ethnographic case study of a construction partnering project, the paper adopts practice based theory for understanding the identity formation and practices of collaboration in construction. Drawing upon practice based theory in general and actor network theory and communities...... of practice in particular, the construction project is interpreted as configuration of networked practices characterized by strong professional practices (e.g. architects and contractors) and locally negotiated collaboration practices. During the construction project, actors gain experiences in relation...... practices – enabling and inhibiting collaboration. Pride and prejudice are thus central constitutive elements of present construction practices in the formation of identity and development of collaboration processes....

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

Energy Technology Data Exchange (ETDEWEB)

McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

2009-08-01

Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

Construction program management

CERN Document Server

Delaney, Joseph

2013-01-01

Although construction is one of the largest industries in the United States, it lags behind other industries in its implementation of modern management techniques such as those contained in the Standard for Program Management (the Standard) by the Project Management Institute (PMI(R)). Construction Program Management details the successful use of the PMI(R) approach for the construction of capital programs. It demonstrates, through case studies, how implementation of PMI's set of tools and techniques can improve the chances of program success. Exploring tactical and strategic management method

Tolerance of ambiguity, perfectionism and resilience are associated with personality profiles of medical students oriented to rural practice.

Science.gov (United States)

Eley, Diann S; Leung, Janni K; Campbell, Narelle; Cloninger, C Robert

2017-05-01

Resilience, coping with uncertainty and learning from mistakes are vital characteristics for all medical disciplines - particularly rural practice. Levels of coping constructs were examined in medical students with and without a rural background or an interest in rural practice. Cross-sectional surveys identified two personality profiles, and their association with levels of Tolerance of Ambiguity, Resilience, Perfectionism-High Standards and Concern over mistakes as constructs indicative of coping. Medical students (N = 797) were stratified by rural background and degree of rural interest. Mediation analysis tested the effect of personality profile on levels of the coping constructs. More (72%) rural background students had Profile 1 which was associated with higher levels of Tolerance of Ambiguity, High standards, and Resilience, but lower Concern over mistakes. Non-rural background students reporting a strong rural interest also had Profile 1 (64%) and similar levels of coping constructs. Personality profile mediated the association between rural interest and levels of coping constructs regardless of background. Having a rural background or strong rural interest are associated with a personality profile that indicates a better capacity for coping. Personality may play a part in an individual's interest in rural practice. Rural workforce initiatives through education should encourage and nurture students with a genuine interest in rural practice - regardless of background.

Standard of care: the legal view.

Science.gov (United States)

Curley, Arthur W; Peltier, Bruce

2014-01-01

The standard of care is a legal construct, a line defined by juries, based on expert testimony, marking a point where treatment failed to meet expectations for what a reasonable professional would have done. There is no before-the-fact objective definition of this standard, except for cases of law and regulation, such as the Occupational Safety and Health Admintration (OSHA). Practitioners must use their judgment in determining what would be acceptable should a case come to trial. Professional codes of conduct and acting in the patient's best interests are helpful guides to practicing within the standard of care. Continuing education credit is available for this and the following article together online at www.dentalethics.org for those who wish to complete the quiz and exercises associated with them (see Course 22).

Best practice in forensic entomology--standards and guidelines.

Science.gov (United States)

Amendt, Jens; Campobasso, Carlo P; Gaudry, Emmanuel; Reiter, Christian; LeBlanc, Hélène N; Hall, Martin J R

2007-03-01

Forensic entomology, the use of insects and other arthropods in forensic investigations, is becoming increasingly more important in such investigations. To ensure its optimal use by a diverse group of professionals including pathologists, entomologists and police officers, a common frame of guidelines and standards is essential. Therefore, the European Association for Forensic Entomology has developed a protocol document for best practice in forensic entomology, which includes an overview of equipment used for collection of entomological evidence and a detailed description of the methods applied. Together with the definitions of key terms and a short introduction to the most important methods for the estimation of the minimum postmortem interval, the present paper aims to encourage a high level of competency in the field of forensic entomology.

Academy of Nutrition and Dietetics: Revised 2017 Standards of Practice and Standards of Professional Performance for Registered Dietitian Nutritionists (Competent, Proficient, and Expert) in Diabetes Care.

Science.gov (United States)

Davidson, Patricia; Ross, Tamara; Castor, Chimene

2018-05-01

There are 30.3 million people with diabetes and 86 million with prediabetes in the United States, underscoring the growing need for comprehensive diabetes care and nutrition for the management of diabetes and diabetes-related conditions. Management of diabetes is also critical for the prevention of diabetes-related complications such as cardiovascular and renal disease. The Diabetes Care and Education Dietetic Practice Group along with the Academy of Nutrition and Dietetics Quality Management Committee have updated the Standards of Practice (SOP) and Standards of Professional Performance (SOPP) for Registered Dietitian Nutritionists (RDNs) in Diabetes Care. The SOP and SOPP for RDNs in Diabetes Care provide indicators that describe three levels of practice: competent, proficient, and expert. The SOP utilizes the Nutrition Care Process and clinical workflow elements for care and management of those with diabetes and prediabetes. The SOPP describes six domains that focus on professionalism: Quality in Practice, Competence and Accountability, Provision of Services, Application of Research, Communication and Application of Knowledge, and Utilization and Management of Resources. Specific indicators outlined in the SOP and SOPP depict how these standards apply to practice. The SOP and SOPP are complementary resources for RDNs caring for individuals with diabetes or specializing in diabetes care or practicing in other diabetes-related areas, including research. The SOP and SOPP are intended to be used for RDN self-evaluation for ensuring competent practice and for determining potential education and training needs for advancement to a higher practice level in a variety of settings. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Knowledge Management Practice in Two Australian Architecture-Engineering-Construction (AEC Companies

Directory of Open Access Journals (Sweden)

Patrick Zou

2012-11-01

Full Text Available Knowledge management (KM could be described as a management system that supports the creation, sharing and retrieving of valued information, expertise and insight within and across communities of people and related organizations using information and communication technologies and hence it is a combination of the effective application of information technlogy and management of human resources. KM is becoming a core competitive factor in construction operations. This paper presents the results of two case studies of KM practices in large AEC (architecture, engineering and construction companies through desk-top study and semi-structured interviews. The results indicate that implementing KM in AEC companies leads to competitive advantages and improved decision-making, problem solving and business performance. The results also indicateed that while technology plays an important role, top management commitment, total employee involvement, performance assessment and the culture of knowledge-learning and sharing must be considered when implementing KM. Therefore it is suggested that the implementation of KM should incorporate the company's vision, work processes, technology and culture, to improve the ability of knowledge creating, capturing, sharing, retrieving and ultimately, to improve the company's competitive advantage, decision making, problem solving and innovation.

Arts Shoved Aside: Changing Art Practices in Primary Schools since the Introduction of National Standards

Science.gov (United States)

Irwin, Michael Ray

2018-01-01

This article reports on the understandings and practices of primary teachers in implementing the arts curriculum since the 2010 introduction of National Standards in Numeracy and Literacy within the New Zealand Education system. The ever-mounting pressure on schools to perform to these standards has resulted in a reduction of emphasis and time…

International Comparisons of Foundation Phase Number Domain Mathematics Knowledge and Practice Standards

Science.gov (United States)

Human, Anja; van der Walt, Marthie; Posthuma, Barbara

2015-01-01

Poor mathematics performance in schools is both a national and an international concern. Teachers ought to be equipped with relevant subject matter knowledge and pedagogical content knowledge as one way to address this problem. However, no mathematics knowledge and practice standards have as yet been defined for the preparation of Foundation Phase…

Analysis and evaluation of status reports for quality assurance practice in nuclear power plant construction

International Nuclear Information System (INIS)

1984-01-01

The study elaborates the structure and definitions of a general description of quality assurance systems with respect to planning and construction of nuclear power plants and indicates standards concerning the production and adaption of structural components. It is suggested to introduce in the licensing procedure the so-called comprehensive constructional report by an expert. For contractors, tasks and responsibilities of the major companies with regard to quality assurance are expressly stipulated. The study also suggests the inclusion of ARGEN, the elaboration of production and test sequence plans and the introduction of a control and evaluation system for the feedback of experience among companies involved and ARGEN. (DG) [de

Standard practice for calculation of corrosion rates and related information from electrochemical measurements

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers the providing of guidance in converting the results of electrochemical measurements to rates of uniform corrosion. Calculation methods for converting corrosion current density values to either mass loss rates or average penetration rates are given for most engineering alloys. In addition, some guidelines for converting polarization resistance values to corrosion rates are provided. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

The Influences of Middle School Mathematics Teachers' Practical Rationality on Instructional Decision Making Regarding the Common Core State Standards for Mathematical Practices

Science.gov (United States)

Sobolewski-McMahon, Lauren M.

2017-01-01

The purpose of this study was to examine the influences of various facets of middle school mathematics teachers' practical rationality on their instructional decision making as they plan to enact the Common Core State Standards for Mathematical Practice, CCSS-MP1 (perseverance in problem solving) and CCSS-MP3 (communicating and critiquing). The…

Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This practice covers the performance of mechanical tests on materials being irradiated with charged particles. These tests are designed to simulate or provide understanding of, or both, the mechanical behavior of materials during exposure to neutron irradiation. Practices are described that govern the test material, the particle beam, the experimental technique, and the damage calculations. Reference should be made to other ASTM standards, especially Practice E 521. Procedures are described that are applicable to creep and creep rupture tests made in tension and torsion test modes. 1.2 The word simulation is used here in a broad sense to imply an approximation of the relevant neutron irradiation environment. The degree of conformity can range from poor to nearly exact. The intent is to produce a correspondence between one or more aspects of the neutron and charged particle irradiations such that fundamental relationships are established between irradiation or material parameters and the material respons...

Construction fraud

NARCIS (Netherlands)

Graafland, J.J.; Liedekerke, L.; Dubbink, W.; van Liedekerke, L.; van Luijk, H.

2011-01-01

Due to the actions of a whistleblower The Netherlands was confronted with a massive case of construction fraud involving almost the entire construction sector. Price fixing, prior consulting, duplicate accounts, fictitious invoices and active corruption of civil servants were rampant practices. This

40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

Science.gov (United States)

2010-07-01

... What emissions limitations and work practice standards must I meet for closed vent systems and control... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What emissions limitations and work practice standards must I meet for closed vent systems and control devices? 63.7925 Section 63.7925...

Perceived heat stress and health effects on construction workers.

Science.gov (United States)

Dutta, Priya; Rajiva, Ajit; Andhare, Dileep; Azhar, Gulrez Shah; Tiwari, Abhiyant; Sheffield, Perry

2015-01-01

Increasing heat waves-particularly in urban areas where construction is most prevalent, highlight a need for heat exposure assessment of construction workers. This study aims to characterize the effects of heat on construction workers from a site in Gandhinagar. This study involved a mixed methods approach consisting of a cross sectional survey with anthropometric measurements (n = 219) and four focus groups with construction workers, as well as environmental measurements of heat stress exposure at a construction site. Survey data was collected in two seasons i.e., summer and winter months, and heat illness and symptoms were compared between the two time periods. Thematic coding of focus group data was used to identify vulnerability factors and coping mechanisms of the workers. Heat stress, recorded using a wet bulb globe temperature monitor, was compared to international safety standards. The survey findings suggest that heat-related symptoms increased in summer; 59% of all reports in summer were positive for symptoms (from Mild to Severe) as compared to 41% in winter. Focus groups revealed four dominant themes: (1) Non-occupational stressors compound work stressors; (2) workers were particularly attuned to the impact of heat on their health; (3) workers were aware of heat-related preventive measures; and (4) few resources were currently available to protect workers from heat stress. Working conditions often exceed international heat stress safety thresholds. Female workers and new employees might be at increased risk of illness or injury. This study suggests significant health impacts on construction workers from heat stress exposure in the workplace, showed that heat stress levels were higher than those prescribed by international standards and highlights the need for revision of work practices, increased protective measures, and possible development of indigenous work safety standards for heat exposure.

Products, practices and processes: exploring the innovation potential for low-carbon housing refurbishment among small and medium-sized enterprises (SMEs) in the UK construction industry

International Nuclear Information System (INIS)

Killip, Gavin

2013-01-01

Scenario-based studies agree that the technical potential for CO 2 emissions reduction from the housing stock is large. This paper explores how a market might be developed for the refurbishment activities assumed in these scenarios, taking the existing market for repair, maintenance and improvement (RMI) as its starting point. Interviews with 16 small and medium-sized enterprises (SMEs) in the construction industry reveal the interdependence of products, practices and processes in housing renovation activities. Conservative practice as well as innovation can be understood as the outcome of multi-lateral influences on firms from other firms, clients, the material buildings and products in their working lives, and from regulations and regulators. Contractors' openness to innovation is contingent on an informal approach to risk assessment, taking account of cost, time efficiency, client demands, and installer confidence in the reliability of the resulting work. The implications of the research are discussed in relation to the need for new practices and processes on refurbishment projects, raising questions for future research on key questions of quality assurance, performance over time, the application of standards, and vocational training. -- Highlights: •Repair, maintenance and improvement works are triggers for low-carbon refurbishment. •Millions of property owners and small firms make for fragmented decision-making. •Actor-Network Theory is used to frame decision-making processes for refurbishment. •Small builders can be innovative if clients allow time and money for experimentation. •Energy policy for existing homes needs to engage with the construction sector

Project management practice and its effects on project success in Malaysian construction industry

Science.gov (United States)

Haron, N. A.; Devi, P.; Hassim, S.; Alias, A. H.; Tahir, M. M.; Harun, A. N.

2017-12-01

The rapid economic development has increased the demand for construction of infrastructure and facilities globally. Sustainable development and globalization are the new ‘Zeitgeist’ of the 21st century. In order to implement these projects successfully and to meet the functional aim of the projects within their lifetime, an efficient project management practice is needed. The aim of this study is to identify the critical success factors (CSFs) and the extent of use of project management practice which affects project success, especially during the implementation stage. Data were obtained from self-administered questionnaires with 232 respondents. A mixed method of data collection was adopted using semi-structured interview and questionnaire approach. The result of the analysis of data obtained showed that new and emerging criteria such as customer satisfaction, competency of the project team, and performance of subcontractors/suppliers are becoming measures of success in addition to the classic iron triangle’s view of time, cost and quality. An insight on the extent of use of different project management practice in the industry was also achieved from the study.

Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings

CERN Document Server

American Society for Testing and Materials. Philadelphia

1985-01-01

1.1 This practice provides descriptions of solar domestic water heating systems and sets forth installation and service practices in new and existing one- and two-family dwellings to help ensure adequate operation and safety., 1.2 This practice applies regardless of the fraction of heating requirement supplied by solar energy, the type of conventional fuel used in conjunction with solar, or the heat transfer fluid (or fluids) used as the energy transport medium. However, where more stringent requirements are recommended by the manufacturer, these manufacturer requirements shall prevail. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Sections 6 and 7.

Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode

CERN Document Server

American Society for Testing and Materials. Philadelphia

1995-01-01

1.1 This practice provides a procedure for the exposure of cover materials for flat-plate solar collectors to the natural weather environment at temperatures that are elevated to approximate operating conditions. 1.2 This practice is suitable for exposure of both glass and plastic solar collector cover materials. Provisions are made for exposure of single and double cover assemblies to accommodate the need for exposure of both inner and outer solar collector cover materials. 1.3 This practice does not apply to cover materials for evacuated collectors or photovoltaics. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Construction and application of an indicator system to assess the ergonomic performance of large and medium-sized construction companies.

Science.gov (United States)

Bezerra, Isabela Xavier Barbalho; de Carvalho, Ricardo José Matos

2012-01-01

This article proposes a system of indicators to evaluate the performance of companies in ergonomics for buildings. The system was developed based primarily on studies related to the performance evaluation of the construction industry and on Brazilian standards of ergonomics and work safety and had also the contribution of national and international indicators related to ergonomics, work safety, quality, sustainability, quality of work life and to organizational behavior. The indicators were named, classified and their components were assigned to compose the theoretical model SIDECE--System of Performance Indicators in Ergonomics for Building Construction (as for the Portuguese acronym), serving the major goals of ergonomics: health, safety and workers' satisfaction and production efficiency. The SIDECE is being validated along with the building construction companies in the city of Natal, Brazil, whose practical results, deriving from the application of instruments to collect field data, are under process, to be presented on the occasion of the 18th World Congress on Ergonomics. It is intended that the SIDECE be used by building construction companies as a support tool for excellence management.

Construction practices in pre-Hispanic flutes

Science.gov (United States)

Rawcliffe, Susan

2002-11-01

The ancient cultures of the Americas were separated by thousands of miles and thousand of years. There was a long history of trade over the miles and the years with many shared cultural ideals and artifacts, as evidenced by their musical instruments. Flutes were the most prevalent instruments found throughout the ancient Americas. Some types are unique to the pre-Hispanic world. Although flutes were constructed from a variety of materials, including bone, cane, seed pods, skulls, it is primarily the ceramic ones that survived, and it is ceramic flutes which form the bulk of this writer's work and research. This paper includes musical demonstrations to show how ancient flutemakers could have manipulated timbre during construction. Clay's plasticity enabled the construction of some instruments, and limited the development of others. Pitch jump flutes, certain Veracruzano whistles, and chamberduct flutes and whistles all share the addition of clay flaps or chambers around the aperture, as do hooded pipes. Some instruments exhibit a seemingly cultural predilection for complex tones that are windy, raspy, or animalistic. Simple adjustments of the airduct promote these timbres. Also included will be samples of the original sounds of ancient flutes.

Some practical applications of fundamental standards in radiation protection

International Nuclear Information System (INIS)

Duhamel, Francis; Lavie, Jean-Marie

1964-05-01

After some general considerations on the recommendations made by the International Commission on Radiological Protection (ICRP) regarding standards of internal or external exposure of organs or tissues to different types of radiations, and a recall of the main problems raised by acute radio-exposures (dose assessment in case of accident, assessment of the dose due to an emergency intervention in case of accident, classification of radio-elements), this report describes how ICRP recommendations have been implemented by the CEA, and tries to relate the problem of acute radio-exposures to the problem of chronic radio-exposures. This study is limited to the case of workers and to internal contamination by inhalation, but can be easily extended to other groups or other contamination types. The authors thus recall some fundamental data and definitions regarding values recommended by the ICRP for chronic radio-exposure and for acute exposure (acceptable exposure, accidental exposure, concerted exposure, units), present and comment how standards are practically applied for dose calculation and assessment. Formulas allow a quick assessment of radiological consequences of an acute radio-exposure, or vice-versa [fr

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Science.gov (United States)

2010-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

French codes and standards for design, construction and in-service inspection of nuclear power plants

International Nuclear Information System (INIS)

Hugot, G.; Grandemange, J. M.

1995-01-01

In 1970, France decided that its future power plants would be of the Pressurized Water Reactor type. This choice proved to be successful since it resulted in more than 60 PWR units in operation or under construction in France and abroad. At the beginning of such a program, the French engineering and manufacturing industry, the national electrical utility and the Safety Authorities had to face the many challenges imposed by the implementation of an imported technology. The government reorganised the licensing process. FRAMATOME, the NSSS vendor, and EDF (Electricite de France), the national utility, decided to create 'AFCEN', the French Association for Design and Construction Rules for Nuclear Island Components. These rules, the RCC's (Regles de Construction et de conception), which are approved by French Safety Authorities deal with mechanical and electrical equipment as well as with nuclear fuel and civil works. They are now being supplemented by in service inspection rules, the RSE's (Regles d'inspection en Service). The paper presents these Codes and their main updating following experience of application, technical progress and evolution of standards. Status of discussion concerning reference to European standardisation and developments of rules applicable to the EPR project will also be discussed

Survey and Research on Continuing Education Curriculum Construction for Primary and Secondary School Teachers

Directory of Open Access Journals (Sweden)

Yang Chao

2015-01-01

Full Text Available Continuing education curriculum construction is the key work to complete the teachers’ continuing education system, it is also an important part of the teachers’ specialization. This study aims to master the main problems of the current primary and secondary school teachers’ continuing education curriculum construction and put forward the corresponding improvement countermeasures. Research in Yunnan province of China as a case, through the Questionnaire Method, Interview Method and Factors Analysis Method, this study make an thorough analysis on the prominent questions of the curriculum resources informationization level, curriculum structure, curriculum practicability, curriculum management and curriculum evaluation mechanism of the primary and secondary school teachers continuing education curriculums construction. Study found that the curriculum construction should also increase the intensity of curriculum resources informatization, develop diversified curriculum resources, complete six modules, carry out a standardized and scientific management and diversified curriculum evaluation mechanism. Research data and conclusions both enrich the theory of the con-struction of the teachers continuing education curriculum, and also provide a practical reference for the admin-istrative department of education and teacher training institutions to formulate measures.

Construction of a homogeneous phantom for radiographic image standardization

International Nuclear Information System (INIS)

Pina, Diana Rodrigues de

1996-01-01

The principle of radiodiagnosis consists in the fact the X-ray beam is attenuated at different degrees by distinct tissues. For this reason, the anatomical structures have distinct radiological opacities, that produce the radiographic image. The progresses in radiology are related to the development if new radiographic image formation systems that enable an amplification in the quality, with low dose and/or risk to the patient. The objective of this work is the sensitometric valuation of a screen-film combination, that is still the most used, for the standardization, of radiographic images. Thinking about this, were constructed homogeneous phantoms of the chest, skull and pelvis, for the calibration of X-ray beams, with the purpose of obtaining radiographic images of good quality, basing in the routine of a radiodiagnosis service and in the scientific knowledge. Questions were approached about the choice of the suitable equipment, that allow the obtention of k Vp and m As combinations, to produce radiographic images of good quality, and the reproduction of these combinations to any conventional equipment of diagnostic X-rays. Also presented are the comparison of the doses imparted by these combinations and those used in routine of the Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto's radiodiagnosis service. (author)

Retrospective on the construction and practice of a state-level emergency medical rescue team.

Science.gov (United States)

Lei, Zhang; Haitao, Guo; Xin, Wang; Yundou, Wang

2014-10-01

For the past few years, disasters like earthquakes, landslides, mudslides, tsunamis, and traffic accidents have occurred with an ever-growing frequency, coverage, and intensity greatly beyond the expectation of the public. In order to respond effectively to disasters and to reduce casualties and property damage, countries around the world have invested more efforts in the theoretical study of emergency medicine and the construction of emergency medical rescue forces. Consequently, emergency medical rescue teams of all scales and types have come into being and have played significant roles in disaster response work. As the only state-level emergency medical rescue force from the Chinese People's Armed Police Forces, the force described here has developed, through continuous learning and practice, a characteristic mode in terms of grouping methods, equipment system construction, and training.

Construction and maintenance of underground mine roads

Energy Technology Data Exchange (ETDEWEB)

Logan, A.S.; Seedsman, R.W. [Coffey Partners International Pty. Ltd. (Australia)

1995-12-31

Good roads are essential in moving men and materials to and from the underground workplace. An underground coal industry funded project was recently completed on underground mine road construction and maintenance. This paper discusses practical approaches to construction and maintenance of underground mine roads using transferable civil technologies and innovative techniques. Mine pavements are generally low-cost (relative to civil roads), constructed to varying standards using locally available materials to best meet the mobility needs of the mine. Performance of pavements is thus largely dependent on the environmental conditions, quality of the available road making materials, maintenance policies and available resources. This paper explains the causes of bad roads in various underground environments. It details available management strategies, construction and water control techniques, road maintenance and vehicle considerations. It concludes that the trend to larger rubber tires mining equipment needs to be matched with construction and maintenance of high quality road surfaces. For large operations, the total cost due to poor roads may equate to in excess of $A1 million per annum. The strategies outlined in this paper provide the basis for construction and maintenance of underground mine roads to help achieve desired production targets. (author). 2 tabs., 4 figs., 7 refs.

New Reactor Siting, Licensing and Construction Experience. Proceedings of the 2. CNRA International Workshop on 'New Reactor Siting, Licensing and Construction Experience'

International Nuclear Information System (INIS)

2013-01-01

This report documents the proceedings from the 2. Workshop on New Reactor Siting, Licensing and Construction Experience. A total of 45 specialists from 16 countries and international organisations attended. The meeting was sponsored by the OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities and hosted by the US Nuclear Regulatory Commission (U.S.NRC). The objectives of the workshop were to provide a forum to exchange information on lessons learned from siting, licensing and constructing new nuclear power plants around the world. Key focus areas included siting practices and regulatory positions that have been enhanced as a result of the Fukushima accident; lessons learned from licensing and design review approaches and challenges, construction experience and recommendations for regulatory oversight; and regulatory cooperation on generic and design specific issues through the MDEP specific working groups. The workshop was structured in 4 technical sessions, each followed by ample time for panel discussions. The first technical session was devoted to regulatory cooperation on generic and design specific issues, MDEP working groups (EPR, AP1000), vendor inspection co-operation, digital I and C, and codes and standards. The second technical session was intended to discuss and share regulatory positions on siting practices and enhancements as a result of lessons learned from Fukushima accident. The third technical session addressed the construction experience and regulatory oversight of new reactor construction activities. And the fourth technical session included presentations on the lessons learned from regulatory licensing reviews of new reactor designs

Balance Assessment Practices and Use of Standardized Balance Measures Among Ontario Physical Therapists

Science.gov (United States)

Sibley, Kathryn M.; Straus, Sharon E.; Inness, Elizabeth L.; Salbach, Nancy M.

2011-01-01

Background Balance impairment is a significant problem for older adults, as it can influence daily functioning. Treating balance impairment in this population is a major focus of physical therapist practice. Objective The purpose of this study was to document current practices in clinical balance assessment and compare components of balance assessed and measures used across practice areas among physical therapists. Design This was a cross-sectional study. Methods A survey questionnaire was mailed to 1,000 practicing physical therapists in Ontario, Canada. Results Three hundred sixty-nine individuals completed the survey questionnaire. More than 80% of respondents reported that they regularly (more than 60% of the time) assessed postural alignment, static and dynamic stability, functional balance, and underlying motor systems. Underlying sensory systems, cognitive contributions to balance, and reactive control were regularly assessed by 59.6%, 55.0%, and 41.2% of the respondents, respectively. The standardized measures regularly used by the most respondents were the single-leg stance test (79.1%), the Berg Balance Scale (45.0%), and the Timed “Up & Go” Test (27.6%). There was considerable variation in the components of balance assessed and measures used by respondents treating individuals in the orthopedic, neurologic, geriatric, and general rehabilitation populations. Limitations The survey provides quantitative data about what is done to assess balance, but does not explain the factors influencing current practice. Conclusions Many important components of balance and standardized measures are regularly used by physical therapists to assess balance. Further research, however, is needed to understand the factors contributing to the relatively lower rates of assessing reactive control, the component of balance most directly responsible for avoiding a fall. PMID:21868613

Quality assurance in the construction of nuclear power plants

International Nuclear Information System (INIS)

Bernsen, S.A.

1975-01-01

A general survey of quality-assurance (QA) practices as they relate to the construction phase of nuclear power plants is presented. The article briefly outlines the evolution of construction QA requirements, describes construction practices and organizational relations that help identify the unique construction-phase features that affect QA practices, identifies some of the principal requirements and programmatic problems involving construction, and discusses potential trends and suggested guidelines for the implementation of particular practices. (U.S.)

Russian standards and design practice of ensuring NPP reliability under severe external loading conditions

Energy Technology Data Exchange (ETDEWEB)

Birbraer, A N [St. Petersburg Research and Design Institute Atomenergoproject, St. Petersburt (Russian Federation)

1993-07-01

Russian Standards and design practice of ensuring NPP reliability under severe external loading conditions are described. The main attention is paid to the seismic design requirements. Explosions, aircraft impact, and tornado are briefly examined too (author)

Russian standards and design practice of ensuring NPP reliability under severe external loading conditions

International Nuclear Information System (INIS)

Birbraer, A.N.

1993-01-01

Russian Standards and design practice of ensuring NPP reliability under severe external loading conditions are described. The main attention is paid to the seismic design requirements. Explosions, aircraft impact, and tornado are briefly examined too (author)

Translating standards into practice: experience and lessons learned at the Department of Veterans Affairs.

Science.gov (United States)

Bouhaddou, Omar; Cromwell, Tim; Davis, Mike; Maulden, Sarah; Hsing, Nelson; Carlson, David; Cockle, Jennifer; Hoang, Catherine; Fischetti, Linda

2012-08-01

The increased need for interoperable electronic health records in health care organizations underscores the importance of standards. The US Department of Veterans Affairs (VA) has a long history of developing and adopting various types of health care data standards. The authors present in detail their experience in this domain. A formal organization within VA is responsible for helping to develop and implement standards. This group has produced a Standards Life Cycle (SLC) process endorsed by VA key business and information technology (IT) stakeholders. It coordinates the identification, description, and implementation of standards aligned with VA business requirements. In this paper, we review the adoption of four standards in the categories of security and privacy, terminology, health information exchange, and modeling tools; emphasizing the implementation approach used in each. In our experience, adoption is facilitated by internal staff with expertise in standards development and adoption. Use of processes such as an SLC and tools such as an enterprise requirement repository help formally track and ensure that IT development and acquisition incorporate these standards. An organization should adopt standards that are aligned with its business priorities and favor those that are more readily implementable. To assist with this final point, we offer a standard "Likelihood of Adoption Scale," which changes as standards specifications evolve from PDF documents only, to PDF documents with construction and testing tools, to fully functional reference implementations. Copyright © 2012 Elsevier Inc. All rights reserved.

The effect of economic growth, oil prices, and the benefits of reactor standardization: Duration of nuclear power plant construction revisited

International Nuclear Information System (INIS)

Csereklyei, Zsuzsanna; Thurner, Paul W.; Bauer, Alexander; Küchenhoff, Helmut

2016-01-01

The profitability of nuclear power plant investment is largely determined by the construction duration, which directly impacts discounted cash flows, debt and interest payments, as well as variable costs, such as labor. This paper analyzes the key drivers of construction duration using survival models. We focus especially on the strategic expectation formation of private and public utilities engaging in such highly risky megaprojects. Using a balanced dataset of explanatory variables and the IAEA/PRIS dataset of reactor construction starts between 1950 and 2013 we find that the expectation of rising oil prices and higher economic growth, along with the higher per capita GDP of a country tend to reduce the time needed to grid connection. We also identify the reactor models with the fastest construction duration. - Highlights: • We find that higher future economic growth speeds up nuclear reactor construction. • Higher national capacity (measured by income per capita) results in faster projects. • Higher oil prices during construction lead to faster construction times. • Reactor standardization may result in faster building times.

Mathematics Pedagogical Standards: A Suggested Model of Instruction in Enhancing the Mathematics Teacher’s Quality of Instruction

Science.gov (United States)

Saad, N. S.; Jemali, M.; Zakaria, Z. Hj; Yusof, Q.

2018-01-01

The paper aims at identifying the standards for teaching and learning of mathematics based on National Council of Teacher of Mathematics (NCTM, 2000), The Australian Association of Mathematics Teachers (AAMT, 2006) and Training and Development Agency for School (TDA, 2007). These known standards were used as a guide in identifying the constructs of the mathematics teacher’s instruction in the classroom. The survey method used in which a questionnaire instrument encompassed on the four identified constructs on the standards for teaching and learning of mathematics, namely professional practices, professional attributes, professional knowledge, and professional instructional processes. The instrument was tested during a pilot study and a Cronbach’s Alpha reliability index of greater than 0.85 was obtained. The actual research was carried out in Peninsular Malaysia involving 224 secondary schools with 1.120 mathematics teachers and 108 primary schools with 540 mathematics teachers. From the selected schools, only 820 secondary mathematics teachers (73.2%) and 361 primary teachers (66.9%) gave a response to the mailed questionnaires. The findings of the study revealed that the secondary and primary mathematics teachers strongly agreed on three constructs; professional practices, professional attributes and professional instructional processes.

29 CFR 1910.12 - Construction work.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Construction work. 1910.12 Section 1910.12 Labor... Construction work. (a) Standards. The standards prescribed in part 1926 of this chapter are adopted as... provisions thereof, to every employment and place of employment of every employee engaged in construction...

Standard practices for verification of displacement measuring systems and devices used in material testing machines

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E83. 1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems m...

Standard practice for extreme value analysis of nonmetallic inclusions in steel and other microstructural features

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice describes a methodology to statistically characterize the distribution of the largest indigenous nonmetallic inclusions in steel specimens based upon quantitative metallographic measurements. The practice is not suitable for assessing exogenous inclusions. 1.2 Based upon the statistical analysis, the nonmetallic content of different lots of steels can be compared. 1.3 This practice deals only with the recommended test methods and nothing in it should be construed as defining or establishing limits of acceptability. 1.4 The measured values are stated in SI units. For measurements obtained from light microscopy, linear feature parameters shall be reported as micrometers, and feature areas shall be reported as micrometers. 1.5 The methodology can be extended to other materials and to other microstructural features. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app...

77 FR 24537 - Draft Standards and Best Practices for Interaction Between Medical Examiner/Coroner and Organ and...

Science.gov (United States)

2012-04-24

... Best Practices for Interaction Between Medical Examiner/Coroner and Organ and Tissue Procurement... Committee Standards and Best Practices for Interaction Between Medical Examiner/Coroner Offices and Organ... coroner/medical examiner office representatives, law enforcement agencies, organizations, and all other...

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-15

This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

77 FR 31041 - Draft Standards and Best Practices for Interaction Between Medical Examiner/Coroner and Organ and...

Science.gov (United States)

2012-05-24

... Best Practices for Interaction Between Medical Examiner/Coroner and Organ and Tissue Procurement... titled ``Organ and Tissue Procurement Committee Standards and Best Practices for Interaction Between Medical Examiner/Coroner Offices and Organ Tissue Procurement Organizations'' from May 12, 2012, to June...

The construction of marketing measures: the case of viewability

OpenAIRE

Cluley, Robert

2018-01-01

This study seeks to develop a critical understanding of marketing measures. Marketing measures inform a variety of marketing practices and have been subject to ethical, discursive and epistemological critique. Informed by a range of theoretical work, this study sheds light on the construction of a key marketing measure in digital advertising: viewability. It shows how a range of competing interests can be mobilized and aligned; how an object of interest can be stabilized; and how standards fo...

Some non-scientific influences on radiation protection standards and practice

International Nuclear Information System (INIS)

Taylor, L.S.

1980-01-01

In this introductory lecture to the 5th International Congress of the IRPA, the problem of setting radiation protection standards and practice is broadly reviewed under the following headings:- 1) Biological effects of radiation, 2) Philosophy, 3) The Media, 4) Morality, (with particular reference to the problem of different classes of exposure) 5) Laws and Regulations (with particular reference to the U.S.) 6) Economics, 7) Education, 8) Credibility of scientists. It is suggested that because of their basic training in a sense of objectivity, a good argument can be made that scientists are as devoid of special interest as any other group. An argument is made that the problem of setting standards for protection can be reduced to a blending of two theories, a) that we are dealing with a single linear, no-threshold dose-effect relationship and b) the toxicological view that concentrations of a toxic substance should be set somewhat below that at which any effect could be found. (U.K.)

Inside a VAMDC data node—putting standards into practical software

Science.gov (United States)

Regandell, Samuel; Marquart, Thomas; Piskunov, Nikolai

2018-03-01

Access to molecular and atomic data is critical for many forms of remote sensing analysis across different fields. Many atomic and molecular databases are however highly specialised for their intended application, complicating querying and combination data between sources. The Virtual Atomic and Molecular Data Centre, VAMDC, is an electronic infrastructure that allows each database to register as a ‘node’. Through services such as VAMDC’s portal website, users can then access and query all nodes in a homogenised way. Today all major Atomic and Molecular databases are attached to VAMDC This article describes the software tools we developed to help data providers create and manage a VAMDC node. It gives an overview of the VAMDC infrastructure and of the various standards it uses. The article then discusses the development choices made and how the standards are implemented in practice. It concludes with a full example of implementing a VAMDC node using a real-life case as well as future plans for the node software.

Constructing Relationships between Science and Practice in the Written Science Communication of the Washington State Wine Industry

Science.gov (United States)

Szymanski, Erika Amethyst

2016-01-01

Even as deficit model science communication falls out of favor, few studies question how written science communication constructs relationships between science and industry. Here, I investigate how textual microprocesses relate scientific research to industry practice in the Washington State wine industry, helping (or hindering) winemakers and…

Evaluation method of radon preventing effect in underground construction

International Nuclear Information System (INIS)

Luo Shaodong; Deng Yuequan; Dong Faqin; Qu Ruixue; Xie Zhonglei

2014-01-01

Background: It's difficult to evaluate the radon prevention effect because of the short operating time of measuring instrument under the circumstances of high humidity in underground construction. Purpose: A new rapid method to evaluate the radon prevention efficiency of underground construction was introduced. Methods: The radon concentrations before and after shielding operation were determined, and according to the regularity of radon decay, the shielding rate can be calculated. Results: The results showed that radon shielding rate in underground construction remains generally stable with variation of time, and the actual relatively standard deviation was 3.95%. So the rapid determination and evaluation of radon preventing effect under special conditions in underground construction can be realized by taking shielding rate in a short time for the final shielding rate. Compared with those by the local static method in ground lab, the results were similar. Conclusion: This paper provided a prompt, accurate and practicable way for the evaluation of radon prevention in underground construction, having a certain reference value. (authors)

Clinical balance assessment: perceptions of commonly-used standardized measures and current practices among physiotherapists in Ontario, Canada.

Science.gov (United States)

Sibley, Kathryn M; Straus, Sharon E; Inness, Elizabeth L; Salbach, Nancy M; Jaglal, Susan B

2013-03-20

Balance impairment is common in multiple clinical populations, and comprehensive assessment is important for identifying impairments, planning individualized treatment programs, and evaluating change over time. However, little information is available regarding whether clinicians who treat balance are satisfied with existing assessment tools. In 2010 we conducted a cross-sectional survey of balance assessment practices among physiotherapists in Ontario, Canada, and reported on the use of standardized balance measures (Sibley et al. 2011 Physical Therapy; 91: 1583-91). The purpose of this study was to analyse additional survey data and i) evaluate satisfaction with current balance assessment practices and standardized measures among physiotherapists who treat adult or geriatric populations with balance impairment, and ii) identify factors associated with satisfaction. The questionnaire was distributed to 1000 practicing physiotherapists. This analysis focuses on questions in which respondents were asked to rate their general perceptions about balance assessment, the perceived utility of individual standardized balance measures, whether they wanted to improve balance assessment practices, and why. Data were summarized with descriptive statistics and utility of individual measures was compared across clinical practice areas (orthopaedic, neurological, geriatric or general rehabilitation). The questionnaire was completed by 369 respondents, of which 43.4% of respondents agreed that existing standardized measures of balance meet their needs. In ratings of individual measures, the Single Leg Stance test and Berg Balance Scale were perceived as useful for clinical decision-making and evaluating change over time by over 70% of respondents, and the Timed Up-and-Go test was perceived as useful for decision-making by 56.9% of respondents and useful for evaluating change over time by 62.9% of respondents, but there were significant differences across practice groups. Seventy

Developing communities of practice in health care

DEFF Research Database (Denmark)

Jørgensen, Rasmus; Edwards, Kasper

Purpose Standard operating procedures (SOPs) are a part of healthcare operations but relying on explicit knowledge is not necessarily sufficient to continuously adapt and improve processes. The theory of communities of practice (CoP) proposes an approach to knowledge sharing that could supplement...... the use of SOPs. A CoP is a social community formed around a practice (e.g. ICU nursing) which induce a propensity to share experiences and thereby constitute knowledge sharing (Lave & Wenger 1991; Brown & Duguid 1991). CoP was conceived as a descriptive construct but has gained popularity and is found...

Collapse simulation of building constructions

Directory of Open Access Journals (Sweden)

Nekrest'yanov Viktor Nikolaevich

Full Text Available The physical reasons for building structures destruction are both the forces arising at stress-strain state of construction elements and external influences arising at emergency situations, as well as their moments, impulses and periodic impulses with the frequencies close to of fluctuations frequencies of construction elements. We shall call the mathematical calculation models for the parameters-reasons of destructions the basic models. The basic models of destruction of building structures elements allow not only providing necessary level of reliability and survivability of the elements and the construction as a whole already at the stage of their design, but also giving the chance, at their corresponding completion, to provide rational decisions on the general need of recovery works and their volume depending on destruction level. Especially important for rational design decisions development, which ensure the demanded constructional safety of building structures, is library creation of the basic mathematical models of standard processes of bearing elements destructions for standard construction designs for the purpose of the further forecast (assessment of the level and probabilities of standard destructions. Some basic mathematical models of destructions processes of the standard elements of building structures are presented in the present article. A model of accounting for construction defects and a model of obtaining requirements to probabilities of partial destructions of a construction are given. Both of these models are probabilistic.

FFTF constructibility

International Nuclear Information System (INIS)

Weber, S.A.; Hulbert, D.I.

1975-01-01

The influence of the design criteria on the constructibility of the Fast Flux Test Facility is described. Specifically, the effects of requirements due to maintenance accessibility, inerting of cells, seismicity, codes, and standards are addressed. The design and construction techniques developed to minimize the impact of the design criteria on cost and schedule are presented with particular emphasis on the cleanliness and humidity controls imposed during construction of the sodium systems. (U.S.)

Sustainable construction - the standard for all public building?

Energy Technology Data Exchange (ETDEWEB)

Handyside, R. [Richard Handyside Construction Resources (United Kingdom)

2002-01-01

This article argues for the need for foresight and planning to achieve sustainable development in the construction of public buildings. Reasons why sustainable development fails are highlighted, and the key factors that go to make a development sustainable are listed and involve the choice and layout of the site, site services, the fitting of spaces to the required purpose, the arrangement of rooms to achieve maximum use of natural light, heat and air, and the choice of construction materials and finishes. The balancing of short and long-term costs, and the use of life-cycle costs in every project are discussed.

Judicial problems in connection with preliminary decision and construction design approval in nuclear licensing procedures

International Nuclear Information System (INIS)

Schmieder, K.

1977-01-01

Standardization in nuclear engineering makes two demands on a legal instrument which is to make this standardization possible and which is to promote standardization in the nuclear licensing practice: On the basis of just one licence for a constructional part or a component, its applicability in any number of subsequent facility licensing procedures has to be warranted, and by virtue of its binding effect, standardization has to create a sufficiently big confidence protection with manufacturers, constructioneers and operators to offer sufficiently effective incentives for standardization. The nuclear preliminary decision pursuant to section 7 a of the Atomic Energy Act in the form of the component preliminary decision appears to be unsuitable as a legal instrument for standardization, as the preliminary decision refers exclusively to the construction of a concrete facility. For standardization in reactor engineering, the construction design approval appears to be basically the proper legal instrument on account of its legal structure as well as its economic effect. Its binding effect encouters a limitation with regard to third parties in so far that this limitation could question again the binding effect in a subsequent site-dependent nuclear licence procedure. The legal structure of the extent of the binding effect, which is decisive for the suitability of the construction design approval, lies with the legislator. The following questions have to be regulated: Ought the applicant to have a legal claim on the granting of a construction design approval, or ought it to be at the discretion of the authorities, and secondly, the extent of the binding effect in terms of time on the basis of the fixation of a time limit, or on the basis of the possibility of subsequent conditions to be imposed, or the revocation. (orig./HP) [de

Translating standards into practice - one Semantic Web API for Gene Expression.

Science.gov (United States)

Deus, Helena F; Prud'hommeaux, Eric; Miller, Michael; Zhao, Jun; Malone, James; Adamusiak, Tomasz; McCusker, Jim; Das, Sudeshna; Rocca Serra, Philippe; Fox, Ronan; Marshall, M Scott

2012-08-01

Sharing and describing experimental results unambiguously with sufficient detail to enable replication of results is a fundamental tenet of scientific research. In today's cluttered world of "-omics" sciences, data standards and standardized use of terminologies and ontologies for biomedical informatics play an important role in reporting high-throughput experiment results in formats that can be interpreted by both researchers and analytical tools. Increasing adoption of Semantic Web and Linked Data technologies for the integration of heterogeneous and distributed health care and life sciences (HCLSs) datasets has made the reuse of standards even more pressing; dynamic semantic query federation can be used for integrative bioinformatics when ontologies and identifiers are reused across data instances. We present here a methodology to integrate the results and experimental context of three different representations of microarray-based transcriptomic experiments: the Gene Expression Atlas, the W3C BioRDF task force approach to reporting Provenance of Microarray Experiments, and the HSCI blood genomics project. Our approach does not attempt to improve the expressivity of existing standards for genomics but, instead, to enable integration of existing datasets published from microarray-based transcriptomic experiments. SPARQL Construct is used to create a posteriori mappings of concepts and properties and linking rules that match entities based on query constraints. We discuss how our integrative approach can encourage reuse of the Experimental Factor Ontology (EFO) and the Ontology for Biomedical Investigations (OBIs) for the reporting of experimental context and results of gene expression studies. Copyright © 2012 Elsevier Inc. All rights reserved.

Standard practice for determining relative image quality response of industrial radiographic imaging systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This standard provides a practice whereby industrial radiographic imaging systems may be comparatively assessed using the concept of relative image quality response (RIQR). The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E 1025 and subsection 5.2 of this practice. Figure 1 illustrates a relative image quality indicator (RIQI) that has four different steel plaque thicknesses (.015, .010, .008, and .005 in.) sequentially positioned (from top to bottom) on a ¾-in. thick steel plate. The four plaques contain a total of 14 different arrays of penetrameter-type hole sizes designed to render varied conditions of threshold visibility ranging from 1.92 % EPS (at the top) to .94 % EPS (at the bottom) when exposed to nominal 200 keV X-ray radiation. Each “EPS” array consists of 30 identical holes; thus, providing the user with a quantity of threshold sensitivity levels suitable for relative image qualitative response com...

Guide to nondestructive assay standards: Preparation criteria, availability, and practical considerations

International Nuclear Information System (INIS)

Stewart, J.E.; Hsue, S.T.; Sampson, T.E.

1997-01-01

For certification and measurement control, nondestructive assay (NDA) instruments and methods used for verification measurement of special nuclear materials (SNMs) require calibrations based on certified reference materials (CRMs), or working reference materials (WRMs), traceable to the national system of measurements, and adequately characteristic of the unknowns. The Department of Energy Office of Safeguards and Security is sponsoring production of a comprehensive guide to preparation of NDA standards. The scope of the report includes preparation criteria, current availability of CRMs and WRMs, practical considerations for preparation and characterization, and an extensive bibliography. In preparing the report, based primarily on experience at Los Alamos, we have found that standards preparation is highly dependent on the particular NDA method being applied. We therefore include sections that contain information specific to commonly used neutron and gamma-ray NDA techniques. 16 refs., 4 figs., 2 tabs

49 CFR 1101.3 - Construction.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Construction. 1101.3 Section 1101.3 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE DEFINITIONS AND CONSTRUCTION § 1101.3 Construction. The rules of construction...

Evidence-based emergency medicine. Creating a system to facilitate translation of evidence into standardized clinical practice: a preliminary report.

Science.gov (United States)

Wright, Stewart W; Trott, Alexander; Lindsell, Christopher J; Smith, Carol; Gibler, W Brian

2008-01-01

The Institute of Medicine, through its landmark report concerning errors in medicine, suggests that standardization of practice through systematic development and implementation of evidence-based clinical pathways is an effective way of reducing errors in emergency systems. The specialty of emergency medicine is well positioned to develop a complete system of innovative quality improvement, incorporating best practice guidelines with performance measures and practitioner feedback mechanisms to reduce errors and therefore improve quality of care. This article reviews the construction, ongoing development, and initial impact of such a system at a large, urban, university teaching hospital and at 2 affiliated community hospitals. The Committee for Procedural Quality and Evidence-Based Practice was formed within the Department of Emergency Medicine to establish evidence-based guidelines for nursing and provider care. The committee measures the effect of such guidelines, along with other quality measures, through pre- and postguideline patient care medical record audits. These measures are fed back to the providers in a provider-specific, peer-matched "scorecard." The Committee for Procedural Quality and Evidence-Based Practice affects practice and performance within our department. Multiple physician and nursing guidelines have been developed and put into use. Using asthma as an example, time to first nebulizer treatment and time to disposition from the emergency department decreased. Initial therapeutic agent changed and documentation improved. A comprehensive, guideline-driven, evidence-based approach to clinical practice is feasible within the structure of a department of emergency medicine. High-level departmental support with dedicated personnel is necessary for the success of such a system. Internet site development (available at http://www.CPQE.com) for product storage has proven valuable. Patient care has been improved in several ways; however, consistent and

Drug evaluation and the permissive principle: continuities and contradictions between standards and practices in antidepressant regulation.

Science.gov (United States)

Abraham, John; Davis, Courtney

2009-08-01

Pharmaceuticals are not permitted on to the market unless they are granted regulatory approval. The regulatory process is, therefore, crucial in whether or not a drug is widely prescribed. Regulatory agencies have developed standards of performance that pharmaceuticals are supposed to meet before entering the market. Regulation of technologies is often discussed by reference to the precautionary principle. In contrast, this paper develops the concept of the 'permissive principle' as a way of understanding the departure of regulators' practices from standards of drug efficacy to which regulatory agencies themselves subscribe. By taking a case study of antidepressant regulation in the UK and the USA, the mechanisms of permissive regulatory practices are examined. An STS methodology of both spatial (international) and temporal comparisons of regulatory practices with regulatory standards is employed to identify the nature and extent of the permissive regulation. It is found that the permissive principle was adopted by drug regulators in the UK and the USA, but more so by the former than the latter. Evidently, permissive regulation, which favours the commercial interests of the drug manufacturer, but is contrary to the interests of patients, may penetrate to the heart of regulatory science. On the other hand, permissive regulation of specific drugs should not be regarded as an inevitable result of marketing strategies and concomitant networks deployed by powerful pharmaceutical companies, because the extent of permissive regulation may vary according to the intra-institutional normative commitments of regulators to uphold their technical standards against the commercial interests of the manufacturer. Likely sociological factors that can account for such permissive regulatory practices are 'corporate bias', secrecy and excessive regulatory trust in the pharmaceutical industry in the UK, political expediency and ideological capture in the USA, combined in both countries

Insurance requirements and practices of Ethiopia's construction sector

African Journals Online (AJOL)

The principles of insurance and types of insurance policies in construCtion industry in general is discussed. The status of consultants and contractors in Ethiopian construction sector is briefly reviewed. Questionnaires were designed to preliminary assess whether relevant insurance policies are bought by contracting and ...

Teaching secondary science constructing meaning and developing understanding

CERN Document Server

Ross, Keith; McKechnie, Janet

2010-01-01

Now fully updated in its third edition Teaching Secondary Science is a comprehensive guide to all aspects of science teaching, providing a wealth of information and ideas about different approaches. With guidance on how children understand scientific ideas and the implications this has on teaching, teachers are encouraged to construct their own meanings and become reflective in their practice. Relating science to government agendas, such as the National Strategies, Assessment for Learning and Every Child Matters, this new edition reflects and maps to changes in national standards. Ke

Peculiarities of the Application of Income Tax Standards by the Subsidiary Company in the Russian Accounting Practice

Science.gov (United States)

Ermakova, Natalya A.; Gudshatullaeva, Elena M.

2016-01-01

The aim of this work is to analyze the application practice of accounting regulation provision of subsidiary company "Accounting of settlements on income tax" (AR 18/02) and correlation of methodology of formed indicators with standards of International Accounting Standards (IAS) 12 "Income taxes" at formation of the…

Creating Spaces for Constructing Practice and Identity: Innovations of Teachers of English Language to Young Learners in Vietnam

Science.gov (United States)

Nguyen, Chinh Duc

2017-01-01

The discourse on construction of practice and identity in language teaching has been situated in transnational contexts. However, not all teachers are provided with access to transnational spaces for professional development. Drawing on the concept of "multimembership" in "multicommunities", this study explores how Vietnamese…

Standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers a technique for monitoring time-of-wetness (TOW) on surfaces exposed to cyclic atmospheric conditions which produce depositions of moisture. 1.2 The practice is also applicable for detecting and monitoring condensation within a wall or roof assembly and in test apparatus. 1.3 Exposure site calibration or characterization can be significantly enhanced if TOW is measured for comparison with other sites, particularly if this data is used in conjunction with other site-specific instrumentation techniques. 1.4 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory

International Nuclear Information System (INIS)

Yang, Jie; Fan, Aiwu; Liu, Wei; Jacobi, Anthony M.

2014-01-01

Highlights: • A design method of heat exchangers motivated by constructal theory is proposed. • A genetic algorithm is applied and the TEMA standards are rigorously followed. • Three cases are studied to illustrate the advantage of the proposed design method. • The design method will reduce the total cost compared to two other methods. - Abstract: A modified optimization design approach motivated by constructal theory is proposed for shell-and-tube heat exchangers in the present paper. In this method, a shell-and-tube heat exchanger is divided into several in-series heat exchangers. The Tubular Exchanger Manufacturers Association (TEMA) standards are rigorously followed for all design parameters. The total cost of the whole shell-and-tube heat exchanger is set as the objective function, including the investment cost for initial manufacture and the operational cost involving the power consumption to overcome the frictional pressure loss. A genetic algorithm is applied to minimize the cost function by adjusting parameters such as the tube and shell diameters, tube length and tube arrangement. Three cases are studied which indicate that the modified design approach can significantly reduce the total cost compared to the original design method and traditional genetic algorithm design method

Standartization and Terminography of New Construction Terms

Directory of Open Access Journals (Sweden)

Zofija Babickienė

2011-06-01

Full Text Available The past ten year period showed the occurance of a great number of new construction terms in the Lithua- nian language. Thus it is necessary to collect and systematize construction terms, terminoids, quasi-terms and standardize them from the point of view of the Standard Lithuanian Language taking into account both logic and terminology requirements. This article deals with modern construction terms from the point of view of the Standard Lithuanian Language including newest data bases saving all actual information on them. The reseach showed that The Dictionary of Construction Terms (2003 ought to be included into The Lithuanian language Term Bank (http://terminai.vlkk.lt. It is necessary to be done for the following reasons. Firstly, because of the creation and standartization as well as sistematization process of new construction terms. Secondly, for the development of continuous scientific discusion and successful professional education. It was established that a certain number of construction terms from the point of view of the Standard Lithuanian Language should be included into new Dictionary of Construction Terms as well as into Term Bank of the Lithuanian Republic. The terms analysed in the article are concerning basement types, pile types, construction joints, also details of walls, roofs, chimneys, construction materials and etc. The analysis showed how different morphological variants and undesirable synonymous terms occur. Finally, the analysis helped to identify that the informal terms mix with formal, standard terms and conclude in incorrect term usage.

Using a standards committee to design practical procedure system improvements

International Nuclear Information System (INIS)

Grider, D.A.; Plung, D.

1993-01-01

In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

Standard practice for torque calibration of testing machines and devices

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines or devices. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing machines may be calibrated by one of the three following methods or combination thereof: 1.1.1 Use of standard weights and lever arms. 1.1.2 Use of elastic torque measuring devices. 1.1.3 Use of elastic force measuring devices and lever arms. 1.1.4 Any of the methods require a specific uncertainty of measurement and a traceability derived from national standards of mass and length. 1.2 The procedures of 1.1.1, 1.1.2, and 1.1.3 apply to the calibration of the torque-indicating systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the torque-indicating system(s) to be calibrated and included in the repor...

Standard practice for estimating the approximate residual circumferential stress in straight thin-walled tubing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 A qualitative estimate of the residual circumferential stress in thin-walled tubing may be calculated from the change in outside diameter that occurs upon splitting a length of the tubing. This practice assumes a linear stress distribution through the tube wall thickness and will not provide an estimate of local stress distributions such as surface stresses. (Very high local residual stress gradients are common at the surface of metal tubing due to cold drawing, peening, grinding, etc.) The Hatfield and Thirkell formula, as later modified by Sachs and Espey, provides a simple method for calculating the approximate circumferential stress from the change in diameter of straight, thin-walled, metal tubing. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Learning through delivery, Westinghouse AP1000 plant construction

International Nuclear Information System (INIS)

Gorgemans, J.; Hinman, R.D.; Steuck, C.M.; Greco, P.L.

2014-01-01

The AP1000 plant, which is a 1100 MWe class pressurized water reactor with passive safety features, is designed around a conventional 2 loop, 2 steam generator primary system configuration with 2 hot legs, 4 reactor coolant pumps directly mounted in the steam generator lower head and 4 cold legs. A particular feature of AP1000 is its modular construction to minimize the time and cost of construction. Modular construction allows activities to be run in parallel, it allows more activities to be performed in a controlled factory instead of in the field, and it provides a better level of quality. The AP1000 plant design includes 106 structural modules and 52 mechanical modules. Structural modules include all penetrations for piping, cable trays, HVAC duct runs, and all reinforcement for pipe, equipment hangers, and supports. Structural modules are shipped in sub-modules to support transportation by rail or truck or barge. Mechanical modules contain equipment such as pumps, tanks, heat exchangers, air-handling units, and filters along with interconnecting pipes, valves, instruments, wiring and support services. Modular construction requires strong coordination between engineering, supply chain and construction. A total of 8 AP1000 units are currently under construction in China and in the United States. The lessons learned and best practices of each new AP1000 construction are systematically incorporated into the standard design. (A.C.)

Standard Operational Protocols in professional nursing practice: use, weaknesses and potentialities.

Science.gov (United States)

Sales, Camila Balsero; Bernardes, Andrea; Gabriel, Carmen Silvia; Brito, Maria de Fátima Paiva; Moura, André Almeida de; Zanetti, Ariane Cristina Barboza

2018-01-01

to evaluate the use of Standard Operational Protocols (SOPs) in the professional practice of the nursing team based on the theoretical framework of Donabedian, as well as to identify the weaknesses and potentialities from its implementation. Evaluative research, with quantitative approach performed with nursing professionals working in the Health Units of a city of São Paulo, composed of two stages: document analysis and subsequent application of a questionnaire to nursing professionals. A total of 247 nursing professionals participated and reported changes in the way the interventions were performed. The main weaknesses were the small number of professionals, inadequate physical structure and lack of materials. Among the potentialities were: the standardization of materials and concern of the manager and professional related to patient safety. The reassessment of SOPs is necessary, as well as the adoption of a strategy of permanent education of professionals aiming at improving the quality of care provided.

The evolution of the structure and application of U.S. NRC regulations and standards

International Nuclear Information System (INIS)

Murley, T.E.; Rosztoczy, Z.R.; McPherson, G.D.

1991-01-01

NRC regulations and standards and their implementation have evolved from early adaptations of conventional engineering practices to a mature, cohesive set of regulations that govern NRC regulation of nuclear power plant safety in the United States. From a simple set of rules and design criteria and from the standards of the professional engineering societies, a hierarchy of practices, standards, guides, rules and goals has developed. Resting on a foundation of industrial practices, this hierarchy rises through levels of national standards, regulatory guides and standard review plans, policy statements and NRC regulations. The licensing process is evolving today toward one that permits both site approval and standard design certification before the plant is constructed. At the present time, NRC is reviewing five standard designs for certification for a period of 15 years. NRC focuses its regulation of operating nuclear plants on inspections conducted from five regional offices. Resident inspectors, specialist inspectors, and multi-disciplinary inspection teams examine specific plant situations. The results of all these inspections are used to develop a complete understanding of a plant's physical condition, its operation, maintenance and management. To improve safe operation of nuclear plants in the U.S., a most important program, the Systematic Assessment of Licensee Performance, measures operational performance, using a broad spectrum of functional areas. (orig.)

Good practices in virtual higher education based on specifications for e-Learning standards

Directory of Open Access Journals (Sweden)

Edgar Javier Carmona Suarez

2017-03-01

Full Text Available Free courses, full academic programs, and partially and totally virtual universities are now offered, which shows an increase in the offer and coverage in higher education. With growth, new needs emerge from questions about the quality of education, which depends on many factors; for example, the standardization of online or virtual academic spaces. This research proposed the creation of a set of technical, administrative, communicative and pedagogical specifications to improve virtual training at the University of Quindío, which serves as a reference for good practices for university teachers. In this process, significant experiences were collected and, as a final result, a proposal was built in the light of categories created by international organizations specialized in standards. This led to standardization processes, which contribute to the strengthening of the quality of education.

A Blueprint for Kindergarteners' Educational Trajectories: The Power of Discursive Practices in Constructing Students' Stories Based on Behaviors

Science.gov (United States)

Orsati, Fernanda Tebexreni

2013-01-01

Discursive practices enacted by educators in kindergarten create a blueprint for how the educational trajectories of students with disabilities get constructed. In this two-year ethnographic case study, I critically examine educators' relationships with students considered to present challenging behaviors in one classroom located in a…

Views of Evidence-Based Practice: Social Workers' Code of Ethics and Accreditation Standards as Guides for Choice

Science.gov (United States)

Gambrill, Eileen

2007-01-01

Different views of evidence-based practice (EBP) include defining it as the use of empirically-validated treatments and practice guidelines (i.e., the EBPs approach) in contrast to the broad philosophy and related evolving process described by the originators. Social workers can draw on their code of ethics and accreditation standards both to…

Adapting Infrastructure and Civil Engineering Practice to a Changing Climate: Developing a Manual of Practice

Science.gov (United States)

Walker, D.; Ayyub, B. M.

2017-12-01

According to U.S. Census, new construction spending in the U.S. for 2014 was $993 Billion (roughly 6 percent of U.S. GDP). Informing the development of standards of engineering practice related to design and maintenance thus represents a significant opportunity to promote climate adaptation and mitigation, as well as community resilience. The climate science community informs us that extremes of climate and weather are changing from historical values and that the changes are driven substantially by emissions of greenhouse gases caused by human activities. Civil infrastructure systems traditionally have been designed, constructed, operated and maintained for appropriate probabilities of functionality, durability and safety while exposed to climate and weather extremes during their full service lives. Because of uncertainties in future greenhouse gas emissions and in the models for future climate and weather extremes, neither the climate science community nor the engineering community presently can define the statistics of future climate and weather extremes. The American Society for Civil Engineering's (ASCE) Committee on Adapting to a Changing Climate is actively involved in efforts internal and external to ASCE to promote understanding of the challenges climate change represents in engineering practice and to promote a re-examination of those practices that may need to change in light of changing climate. In addition to producing an ASCE e-book, as well as number of ASCE webinars, the Committee is currently developing a Manual of Practice intended to provide guidance for the development or enhancement of standards for infrastructure analysis and design in a world in which risk profiles are changing (non-stationarity) and climate change is a reality, but cannot be projected with a high degree of certainty. This presentation will explore both the need for such guidance as well as some of the challenges and opportunities facing its implementation.

Geologic factors and house construction practices affecting indoor radon in Onondaga County, New York

International Nuclear Information System (INIS)

Laymon, C.; Kunz, C.

1990-01-01

Indoor radon in Onondaga County, New York is largely controlled by bedrock and surficial geology. At more local scales, these alone are insufficient to characterize indoor radon potential. This paper reports on a detailed study of the concentration of indoor radon, soil radium, soil-gas radon, soil and bedrock type, permeability, and home construction practices indicates that above-average indoor radon concentrations are associated with gravelly moraine and glaciofluvial deposits, the radium-bearing Marcellus Shale, and high permeability zones around the substructure of houses built into limestone bedrock

PREMs in inflammatory arthritis: from guidelines to standard practice.

Science.gov (United States)

Palmer, Deborah; Miedany, Y El

There is now a widespread realisation that patients' views are not incidental to, but essential to, achieving high-quality care. However, despite increasing awareness of its potential value, patient experience is not routinely assessed in inflammatory arthritis patients at present. In fact, use of patient-reported experience measures (PREMs) to evaluate the patients' management and the quality of services remains a challenge. In contrast with cancer and chronic obstructive pulmonary disease (COPD), adopting a PREMs approach in inflammatory arthritis patients is difficult because of a lack of tools and approach. This article discusses how the guidelines can be translated into standard clinical practice, creating a 'therapeutic alliance' between the health professional and patients. It will also present a novel tool for use of PREMs, which can be used in routine clinical care.

Standard practice for examination of seamless, Gas-Filled, pressure vessels using acoustic emission

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01