Graph-Based Interactive Bibliographic Information Retrieval Systems

Science.gov (United States)

Zhu, Yongjun

2017-01-01

In the big data era, we have witnessed the explosion of scholarly literature. This explosion has imposed challenges to the retrieval of bibliographic information. Retrieval of intended bibliographic information has become challenging due to the overwhelming search results returned by bibliographic information retrieval systems for given input…

Bibliographic Resources for the Historian of Astronomy

Science.gov (United States)

Corbin, B. G.

1999-12-01

Many large library collections now have online bibliographic catalogs on the web. These provide many hidden resources for the historian of astronomy. Special searching techniques will allow the historian to scan bibliographic records of hundreds of entries relating to biographies of astronomers, collected works of astronomers, ancient and medieval astronomy and many other historical subjects. Abstract databases such as the Astrophysics Data System and ARIBIB are also adding much historical bibliographic information. ARIBIB will eventually contain scanned images of the Astronomischer Jahresbericht containing bibliographic entries for all literature of astronomy from 1899 to 1968 and Astronomy and Astrophysics Abstracts from 1969 to present. Commercial services such as UnCover and FirstSearch provide a means of reaching bibliographic entries for journal and book literature in the history of astronomy which were not easily located in the past. A broad overview of these collections and services will be given, and searching techniques for finding ``hidden" bibliographic data will be presented. Web page addresses will be given for all sources covered.

Bibliographic index to photonuclear reaction data (1955--1992)

Energy Technology Data Exchange (ETDEWEB)

Asami, Tetsuo [Data Engineering, Inc., Yokohama (Japan); Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Dept. of Reactor Engineering

1993-10-01

Japanese Nuclear Data Committee (JNDC) has a plan to compile the evaluated data library for photon-induced nuclear reaction cross sections, and the work on the data evaluation is in progress at the present. In the evaluations for these data a bibliographic index for neutron nuclear data is required. As the bibliographic index to photonuclear reactions, several excellent compilations have been done at some research institutes in the world, and have contributed to various basic and applied researches on the photonuclear reactions. For example, there are the abstract sheets published by US National Bureau of Standards and the data index published regularly in Russia. On the other hand, the four-center network on nuclear data (US National Nuclear Data Center at Brookhaven, Russian Nuclear Data Center at Obninsk, NEA Data Bank at Paris and IAEA Nuclear Data Section at Vienna) compiles and exchanges the numerical data on photonuclear reactions as well as on neutron-induced ones, in the EXFOR format. Those numerical data are available for users. There is, however, no bibliographic index to photonuclear reactions, available for general users. Therefore, the present work to make a photonuclear reaction data index has been done urgently to contribute to the above-mentioned data evaluation. Although these data might be still incomplete and have some defects, we have decided to serve this as the first edition of our photonuclear reaction index.

Dynamic summarization of bibliographic-based data

Directory of Open Access Journals (Sweden)

Hurdle John F

2011-02-01

Full Text Available Abstract Background Traditional information retrieval techniques typically return excessive output when directed at large bibliographic databases. Natural Language Processing applications strive to extract salient content from the excessive data. Semantic MEDLINE, a National Library of Medicine (NLM natural language processing application, highlights relevant information in PubMed data. However, Semantic MEDLINE implements manually coded schemas, accommodating few information needs. Currently, there are only five such schemas, while many more would be needed to realistically accommodate all potential users. The aim of this project was to develop and evaluate a statistical algorithm that automatically identifies relevant bibliographic data; the new algorithm could be incorporated into a dynamic schema to accommodate various information needs in Semantic MEDLINE, and eliminate the need for multiple schemas. Methods We developed a flexible algorithm named Combo that combines three statistical metrics, the Kullback-Leibler Divergence (KLD, Riloff's RlogF metric (RlogF, and a new metric called PredScal, to automatically identify salient data in bibliographic text. We downloaded citations from a PubMed search query addressing the genetic etiology of bladder cancer. The citations were processed with SemRep, an NLM rule-based application that produces semantic predications. SemRep output was processed by Combo, in addition to the standard Semantic MEDLINE genetics schema and independently by the two individual KLD and RlogF metrics. We evaluated each summarization method using an existing reference standard within the task-based context of genetic database curation. Results Combo asserted 74 genetic entities implicated in bladder cancer development, whereas the traditional schema asserted 10 genetic entities; the KLD and RlogF metrics individually asserted 77 and 69 genetic entities, respectively. Combo achieved 61% recall and 81% precision, with an F

Bibliographic Research and the Love of Learning.

Science.gov (United States)

Weiskel, Timothy C.

1985-01-01

Discusses the design and several applications of the computer program, BIBLIO-File. Designed primarily for interactive bibliographic instruction and research, this program allows users to enter, sort, index, search, and print annotated bibliographic information. (MBR)

Bibliographic Instruction in the 21st Century.

Science.gov (United States)

Poirier, Gayle

2000-01-01

Discusses bibliographic instruction in libraries. Topics include a history of bibliographic instruction; the Internet and electronic searching; librarians' use of technology; defining information needs; locating and accessing information, including classification systems and Boolean searching; evaluating information; using and communication…

Networking of Bibliographical Information: Lessons learned for the Virtual Observatory

Science.gov (United States)

Genova, Françoise; Egret, Daniel

Networking of bibliographic information is particularly remarkable in astronomy. On-line journals, the ADS bibliographic database, SIMBAD and NED are everyday tools for research, and provide easy navigation from one resource to another. Tables are published on line, in close collaboration with data centers. Recent new developments include the links between observatory archives and the ADS, as well as the large scale prototyping of object links between Astronomy and Astrophysics and SIMBAD, following those implemented a few years ago with New Astronomy and the International Bulletin of Variable stars . This networking has been made possible by close collaboration between the ADS, data centers such as the CDS and NED, and the journals, and this partnership being now extended to observatory archives. Simple, de facto exchange standards, like the bibcode to refer to a published paper, have been the key for building links and exchanging data. This partnership, in which practitioners from different disciplines agree to link their resources and to work together to define useful and usable standards, has produced a revolution in scientists' practice. It is an excellent model for the Virtual Observatory projects.

China Dimensions Data Collection: China Maps Bibliographic Database

Data.gov (United States)

National Aeronautics and Space Administration — China Maps Bibliographic Database is an historical collection of bibliographic information for more than 400 maps of China. The information resides in a searchable...

Bibliographic Instruction : A Webliography

Directory of Open Access Journals (Sweden)

2004-09-01

Full Text Available A Webliography about the Bibliographic Instruction, it collects a variety of internet resources divided to main categories; directories, articles, bibliographies, organization, mailing lists, and interest groups.

Specialist Bibliographic Databases.

Science.gov (United States)

Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A; Trukhachev, Vladimir I; Kostyukova, Elena I; Gerasimov, Alexey N; Kitas, George D

2016-05-01

Specialist bibliographic databases offer essential online tools for researchers and authors who work on specific subjects and perform comprehensive and systematic syntheses of evidence. This article presents examples of the established specialist databases, which may be of interest to those engaged in multidisciplinary science communication. Access to most specialist databases is through subscription schemes and membership in professional associations. Several aggregators of information and database vendors, such as EBSCOhost and ProQuest, facilitate advanced searches supported by specialist keyword thesauri. Searches of items through specialist databases are complementary to those through multidisciplinary research platforms, such as PubMed, Web of Science, and Google Scholar. Familiarizing with the functional characteristics of biomedical and nonbiomedical bibliographic search tools is mandatory for researchers, authors, editors, and publishers. The database users are offered updates of the indexed journal lists, abstracts, author profiles, and links to other metadata. Editors and publishers may find particularly useful source selection criteria and apply for coverage of their peer-reviewed journals and grey literature sources. These criteria are aimed at accepting relevant sources with established editorial policies and quality controls.

Specialist Bibliographic Databases

Science.gov (United States)

2016-01-01

Specialist bibliographic databases offer essential online tools for researchers and authors who work on specific subjects and perform comprehensive and systematic syntheses of evidence. This article presents examples of the established specialist databases, which may be of interest to those engaged in multidisciplinary science communication. Access to most specialist databases is through subscription schemes and membership in professional associations. Several aggregators of information and database vendors, such as EBSCOhost and ProQuest, facilitate advanced searches supported by specialist keyword thesauri. Searches of items through specialist databases are complementary to those through multidisciplinary research platforms, such as PubMed, Web of Science, and Google Scholar. Familiarizing with the functional characteristics of biomedical and nonbiomedical bibliographic search tools is mandatory for researchers, authors, editors, and publishers. The database users are offered updates of the indexed journal lists, abstracts, author profiles, and links to other metadata. Editors and publishers may find particularly useful source selection criteria and apply for coverage of their peer-reviewed journals and grey literature sources. These criteria are aimed at accepting relevant sources with established editorial policies and quality controls. PMID:27134485

Bibliographic data base for low activation materials

International Nuclear Information System (INIS)

Alenina, M.V.; Kolotov, V.P.; Ivanov, L.I.

2007-01-01

Full text of publication follows: The analysis of the publications dealing with development of low-activation materials for fusion technology demonstrates that the period of information doubling is about 5-6 years. Such high rate usually is characteristic of the actively developing field of science. To develop an useful instrument for analysis and systematization of the available data a computer based bibliographic system has been developed some time ago. Recently the engine of the system has been significantly modernized. The bibliographic system is based on using of MS SQL server data base which includes main bibliographic information including abstracts. The most important feature of the system is that full-text abstracts searching capabilities are appended with indexing of information by experts to increase its definition. The experts indexes cover the following topics: - Main problems; - Software and methods for calculation; - Libraries of nuclear data; - Spectrum of neutrons for different construction parts of fusion reactor; - Low activation materials; - Technology of production; - Radiation effects; - Utilization of radiation waste; - Estimation of risks; - Designs of fusion reactor; - Nuclear transmutations; - Equipment used for investigations. The primary data base is filling/appending by periodical queries to different bibliographic data bases (INIS, COMPEMDEX and others) via suitable Internet providers including strict analysis of the income information to remove a possible 'information noise' and following data indexing by experts. The data base contains references since 1976 year (when first works in this area have been fulfilled) and until now. The bibliographic system is accessible by means of Internet using different forms developed for queries (http://www.geokhi.ru/~lam_db). (authors)

Bibliographic data base for low activation materials

Energy Technology Data Exchange (ETDEWEB)

Alenina, M.V.; Kolotov, V.P. [Vernadsky Institute of Geochemistry and Analytical Chemistry, Moscow (Russian Federation); Ivanov, L.I. [A.A. Baikov Institute of Metallurgy and Science of Materials, Russian Academy of Sciences, Moscow (Russian Federation)

2007-07-01

Full text of publication follows: The analysis of the publications dealing with development of low-activation materials for fusion technology demonstrates that the period of information doubling is about 5-6 years. Such high rate usually is characteristic of the actively developing field of science. To develop an useful instrument for analysis and systematization of the available data a computer based bibliographic system has been developed some time ago. Recently the engine of the system has been significantly modernized. The bibliographic system is based on using of MS SQL server data base which includes main bibliographic information including abstracts. The most important feature of the system is that full-text abstracts searching capabilities are appended with indexing of information by experts to increase its definition. The experts indexes cover the following topics: - Main problems; - Software and methods for calculation; - Libraries of nuclear data; - Spectrum of neutrons for different construction parts of fusion reactor; - Low activation materials; - Technology of production; - Radiation effects; - Utilization of radiation waste; - Estimation of risks; - Designs of fusion reactor; - Nuclear transmutations; - Equipment used for investigations. The primary data base is filling/appending by periodical queries to different bibliographic data bases (INIS, COMPEMDEX and others) via suitable Internet providers including strict analysis of the income information to remove a possible 'information noise' and following data indexing by experts. The data base contains references since 1976 year (when first works in this area have been fulfilled) and until now. The bibliographic system is accessible by means of Internet using different forms developed for queries (http://www.geokhi.ru/{approx}lam{sub d}b). (authors)

Bibliographic Control in South Africa

Science.gov (United States)

Musiker, Reuben

1972-01-01

The author sets as his task the consideration of the present state of bibliographical control of South Africa's bookstock with special reference to centralization and decentralization. (20 references) (Author/SJ)

Specialist Bibliographic Databases

OpenAIRE

Gasparyan, Armen Yuri; Yessirkepov, Marlen; Voronov, Alexander A.; Trukhachev, Vladimir I.; Kostyukova, Elena I.; Gerasimov, Alexey N.; Kitas, George D.

2016-01-01

Specialist bibliographic databases offer essential online tools for researchers and authors who work on specific subjects and perform comprehensive and systematic syntheses of evidence. This article presents examples of the established specialist databases, which may be of interest to those engaged in multidisciplinary science communication. Access to most specialist databases is through subscription schemes and membership in professional associations. Several aggregators of information and d...

Non Standard Finite Difference Scheme for Mutualistic Interaction Description

OpenAIRE

Gabbriellini, Gianluca

2012-01-01

One of the more interesting themes of the mathematical ecology is the description of the mutualistic interaction between two interacting species. Based on continuous-time model developed by Holland and DeAngelis 2009 for consumer-resource mutualism description, this work deals with the application of the Mickens Non Standard Finite Difference method to transform the continuous-time scheme into a discrete-time one. It has been proved that the Mickens scheme is dynamically consistent with the o...

Urban Studies: A Study of Bibliographic Access and Control.

Science.gov (United States)

Anderson, Barbara E.

This paper analyzes: (1) the bibliographic access to publications in urban studies via printed secondary sources; (2) development and scope of classification systems and of vocabulary control for urban studies; and (3) currently accessible automated collections of bibliographic citations. Urban studies is defined as "an agglomeration of…

IFLA General Conference, 1986. Bibliographic Control Division. Section: Bibliography. Papers.

Science.gov (United States)

International Federation of Library Associations and Institutions, The Hague (Netherlands).

Papers on bibliographic control presented at the 1986 International Federation of Library Associations (IFLA) conference include: (1) "Bibliographic Interchange/Coordination in Southeast Asia (Huck Tee Lim, Malaysia); (2) "Project for 'Chinese National Bibliography' and Its Progress" (Huang Jungui, China); (3) "Subject…

Bibliographic review of intestinal duplication in the pediatric patient

International Nuclear Information System (INIS)

Molina Campos, Cesar

2013-01-01

An exhaustive bibliographical review was carried out on all the clinical, diagnostic and therapeutic aspects related to intestinal duplication, to update the concepts that are exposed in the literature. An observational and descriptive study of the literature found was carried out, using as source the articles found in the National Library of Health and Social Security (BINAS) and on the Internet, in addition to the official textbook of the pediatric surgery graduate in Costa Rica. A study of updating of the clinical findings, approach and therapeutic of the pathology was carried out. A protocolization of all diagnosis, can be considered as a valuable tool to help make this diagnosis as expeditious and accurate as possible, in order to provide adequate and safe treatment to the patient, significantly reducing the risks and morbidity in surgery as definitive treatment [es

42 CFR 4.6 - Reference, bibliographic, reproduction, and consultation services.

Science.gov (United States)

2010-10-01

... Director may publish and make available for general distribution by the Library, bibliographic searches... libraries. (b) Specialized bibliographic services. The Director may provide bibliographies on individually... determined in each case by the Director to be necessary to assure more effective distribution of the...

The Australian National Bibliographic Database and the Functional Requirements for the Bibliographic Database (FRBR)

Science.gov (United States)

Rajapatirana, Bemal; Missingham, Roxanne

2005-01-01

The development of the conceptual "Functional Requirements for Bibliographic Records" (FRBR) Model enables records to be considered in terms of contextual relationships. Developments in software can capitalise on this to significantly improve the display of works through surfacing of these relationships. This paper reports on an investigation of…

A NEW DESCRIPTION OF THE SYNTAX OF ‘STANDARD PORTUGUESE’

Directory of Open Access Journals (Sweden)

Maria Eugenia Lammoglia Duarte

2016-01-01

Full Text Available This article takes as a starting point Perini’s (1985 proposal, according to which a new description of the grammar of standard Portuguese in the light of linguistic findings and based on a corpus of real data from technical and journalistic literature was imperative. Some results from contemporary writing reveal that such a description must take into account its variable character, exhibiting a mixture of features of European Portuguese (the target grammar of school and of Brazilian Portuguese.

Sustainable operations in nuclear research reactors. A bibliographical study

International Nuclear Information System (INIS)

Kibrit, Eduardo; Rodrigues de Aquino, Afonso; Marotti de Mello, Adriana; Tromboni de Souza Nascimento, Paulo

2017-01-01

Sustainability is gaining prominence in the area of operations management. By means of a bibliographical research, we identified in literature sustainable operations carried out by operating organizations of nuclear research reactors. The methodology applied consisted in gathering material, descriptive analysis, selection of analytical categories and evaluation of the material collected. The collection of material was performed by a search made on academic and nuclear databases, with keywords structured for the subject of the research. The collected material was analysed and analytical categories on the theme sustainable operations were established. The evaluation of the collected material resulted in references accepted for the study, classified according to the pre-established analytical categories. The results were significant. From then on, a theoretical review on the topic under study was structured, based on pre-defined analytical categories. Thus, we were able to identify gaps in the literature and propose new studies on the subject.

Sustainable operations in nuclear research reactors. A bibliographical study

Energy Technology Data Exchange (ETDEWEB)

Kibrit, Eduardo; Rodrigues de Aquino, Afonso [Cidade Univ., Sao Paolo (Brazil). Inst. de Pesquisas Energeticas e Nucleares; Marotti de Mello, Adriana [Sao Paolo Univ. (Brazil). Faculdade de Economia; Tromboni de Souza Nascimento, Paulo [Sao Paolo Univ. (Brazil). Faculdade de Economia Administracao e Contabilidade

2017-10-15

Sustainability is gaining prominence in the area of operations management. By means of a bibliographical research, we identified in literature sustainable operations carried out by operating organizations of nuclear research reactors. The methodology applied consisted in gathering material, descriptive analysis, selection of analytical categories and evaluation of the material collected. The collection of material was performed by a search made on academic and nuclear databases, with keywords structured for the subject of the research. The collected material was analysed and analytical categories on the theme sustainable operations were established. The evaluation of the collected material resulted in references accepted for the study, classified according to the pre-established analytical categories. The results were significant. From then on, a theoretical review on the topic under study was structured, based on pre-defined analytical categories. Thus, we were able to identify gaps in the literature and propose new studies on the subject.

Materials data through a bibliographic database INIS

International Nuclear Information System (INIS)

Yamamoto, Akira; Itabashi, Keizo; Nakajima, Hidemitsu

1992-01-01

INIS (International Nuclear Information System) is a bibliographic database produced by collaboration of IAEA and its member countries, holding 1,500,000 records as of 1991. Although a bibliographic database does not provide numerical data itself, specific materials information can be obtained through retrieval specifying materials, properties conditions, measuring methods, etc. Also, 'data flagging' facilitates searching a record containing data. INIS has also a function of clearing house that provides original documents of scarce distribution. Hard copies of the technical reports or other non-conventional literatures are available. An efficient use of INIS database for the materials data is presented using an on-line terminal. (author)

Recent advances in aerosol research a bibliographical review

CERN Document Server

Davies, C N

1964-01-01

Recent Advances in Aerosol Research: A Bibliographical Review presents a bibliographic review of advances in aerosol research covering the period from the beginning of 1957 to the end of 1962. Topics covered include chemical reactions, combustion, coagulation and diffusion, and adhesion of particles. References on filtration, evaporation and condensation, nucleation and growth, and laminar flow and impingement are also included. This volume is comprised of 19 chapters and begins by citing research on acoustic, ultrasonic, and shock wave effects, along with adhesion of particles, chemical react

Repetitive Bibliographical Information in Relational Databases.

Science.gov (United States)

Brooks, Terrence A.

1988-01-01

Proposes a solution to the problem of loading repetitive bibliographic information in a microcomputer-based relational database management system. The alternative design described is based on a representational redundancy design and normalization theory. (12 references) (Author/CLB)

Bibliographic culture of periodical as a direction of informational and analytical work of library

Directory of Open Access Journals (Sweden)

М. О. Подрезова

2014-07-01

Full Text Available The purpose of article is definition of changes in the work of Informational and Bibliographic Department of Scientific Library of Odesa I. I. Mechnikov National University that have happened recently. The purpose of publication consists in the description of directions of activity of the Department and particular of informational analytics. The author mainly used methods of theoretical research such as analysis, synthesis, generalization. The analysis shows that in consequence of transformation in the work of Informational and Bibliographic Department informational analitycs has become its priority activity. The main purpose of such kind of work is improving the quality of publishing output of university that is realized in forming of bibliographical culture of publications as well as promotion of the periodicals in global scientific space. To that end legal and regulatory framework of periodical publications, their inclusion to the list of academic editions ofUkrainewas monitored. Besides conditions of inclusion of editions to such scientometric databases as Scopus, IndexCopernicus, Russian Science Citation Index were studied. Described experience of transformation processes in the Scientific Library of Odesa I. I. Mechnikov National University will be useful for other higher school libraries. Materials of publication may be used by editorial boards of journals for editing periodical for publishing and for including of edition to the international scientific society. The analysis of the Department’s work showed a necessity of reorganization. Generally the Scientific Library of Odesa I. I. Mechnikov National University responds quickly to the modern transformations in educational process and scientific activity considering development of informational technologies.

Computer systems and software description for Standard-E+ Hydrogen Monitoring System (SHMS-E+)

International Nuclear Information System (INIS)

Tate, D.D.

1997-01-01

The primary function of the Standard-E+ Hydrogen Monitoring System (SHMS-E+) is to determine tank vapor space gas composition and gas release rate, and to detect gas release events. Characterization of the gas composition is needed for safety analyses. The lower flammability limit, as well as the peak burn temperature and pressure, are dependent upon the gas composition. If there is little or no knowledge about the gas composition, safety analyses utilize compositions that yield the worst case in a deflagration or detonation. Knowledge of the true composition could lead to reductions in the assumptions and therefore there may be a potential for a reduction in controls and work restrictions. Also, knowledge of the actual composition will be required information for the analysis that is needed to remove tanks from the Watch List. Similarly, the rate of generation and release of gases is required information for performing safety analyses, developing controls, designing equipment, and closing safety issues. This report outlines the computer system design layout description for the Standard-E+ Hydrogen Monitoring System

The Relevance Aura of Bibliographic Records.

Science.gov (United States)

Brooks, Terrence A.

1997-01-01

Analyzes relevance assessments of topical descriptors for bibliographic records for two dimensions: (1) a vertical conceptual hierarchy of broad to narrow descriptors, and (2) a horizontal linkage of related terms. The data were analyzed for a semantic distance and semantic direction effect as postulated by the Semantic Distance Model. (Author/LRW)

AUTltORITY CONTROL REGARDING CHINESE PERSONAL NAMES：Enhancement and Linkage with the Bibliographic Database

Institute of Scientific and Technical Information of China (English)

AbrahamJ.Yu

1994-01-01

Authority control is critical for the quality of the bibliographic database. Authority control is important in guiding users from variant forms of headings to the controlled forms of headings and providing users with the related headings. With authority control, the forms of headings in the bibliographic records are consista,t and easy to access. Authority control not only increases the accuracy of searching but also makes retrieving records from the online bibliographic database easier. In the first part of the paper, the author brings out three formats for Chinese personal names in the online environment. Tire second part presents a new model for better authority control regarding Chinese presonal names. In the last part, the author emphasizes the importance of linking the online authority records with the bibliographic database. The quality of the database can be improved dramatically by providing vernacular access capability to the name authorty, records and ensuring that every personal name heading in the bibliographic records have corresponding Library of Congress name authority records。

Microcomputer Database Management Systems for Bibliographic Data.

Science.gov (United States)

Pollard, Richard

1986-01-01

Discusses criteria for evaluating microcomputer database management systems (DBMS) used for storage and retrieval of bibliographic data. Two popular types of microcomputer DBMS--file management systems and relational database management systems--are evaluated with respect to these criteria. (Author/MBR)

BIBLIO-DATA, the national bibliographical data bank of the Deutsche Bibliothek

International Nuclear Information System (INIS)

Buchbinder, R.; Weidemueller, H.U.; Tiedemann, E.

1979-04-01

Part A introduces the German national bibliographical data bank BIBLIO-DATA is based on the Information-Retrieval-System STAIRS from IBM which was improved by additional programs of ZMD. The primary emphases of this article is on the discussion of the BIBLIO-DATA concept according to which the data of 'Deutsche Bibliographie' are being prepared and stored suitable for information retrieval. BIBLIO-DATA is based on national bibliographical data, the characteristics, problems and deficiencies due to this fact are mentioned very detailed. Two additional comments show the various possibilities of research with BIBLIO-DATA by means of some examples in order to show that the research work is not only faster but also much more effective. Part B proves that BIBLIO-DATA cannot automate the analysis of contents or the allocation of subject heading. At the present state of operation BIBLIO-DATA has to support the conventional-intellectual work of subject cataloguing by retrospective research especially because of the considerably facilitated access to former indexing results. Part C describes the practical work with BIBLIO-DATA concerning bibliographical research and literature compilation and comes to the conclusion that effective bibliographical work is based on an appropriate combination of data-bank retrieval and conventional research work. (orig.) [de

Bibliographic Information Retrieval Systems: Increasing Cognitive Compatibility.

Science.gov (United States)

Smith, Philip J.; And Others

1987-01-01

Discusses the impact of research in artificial intelligence and human computer interaction on the design of bibliographic information retrieval systems, and presents design principles of a prototype system that uses semantically based searches and a knowledge base consisting of conceptual frames. (10 references) (CLB)

Bibliographic study on molybdenum biokinetics

International Nuclear Information System (INIS)

Erzberger, A.

1988-05-01

This bibliographical study compiles and analyzes findings about the metabolism and resorption of molybdenum. Besides including studies on the physiology of molybdenum 99, a general survey is given on molybdenum in the environment and on its physiological behaviour. In particular, information on the dependence of molybdenum resorption on various factors, such as the chemical form, antagonisms etc., are gathered from literature. These factors have to be considered for sensibly carrying out necessary experiments. (orig./MG) [de

Online Petroleum Industry Bibliographic Databases: A Review.

Science.gov (United States)

Anderson, Margaret B.

This paper discusses the present status of the bibliographic database industry, reviews the development of online databases of interest to the petroleum industry, and considers future developments in online searching and their effect on libraries and information centers. Three groups of databases are described: (1) databases developed by the…

What is knowledge? A rational answer in bibliographic context

Directory of Open Access Journals (Sweden)

Mauro Guerrini

2016-11-01

Full Text Available An analysis of the interview by Marco Menato and Simone Volpato with Alfredo Serrai that appears in the book La bibliografia come febbre di conoscenza, Macerata, Biblohaus, 2015. Menato and Volpato have composed a text based on an e-mail conversation in which emerges a portrait of one of the greatest scholars of Bibliography, that continues to represent the excellence of Bibliographic disciplines. Serrai has established principles in connection with some sciences that gravitate around the Bibliographic disciplines, in particular with the Philosophy of Science. Serrai believes that the bibliography is a map of knowledge, an intellectual action, and not a study of the physical media (analytical bibliography or as erudition.

Investigation of fruit irradiation: bibliographical review

International Nuclear Information System (INIS)

Luna C, P.C.

1991-01-01

It was carried out a bibliographical review that embraces the years 1984-1987, on the relating works to the irradiation of some fruits like the apple, date, peach, plum, cherry, papaya, grape, banana, pear and strawberry. The purpose is to have a reference on the doses and the conditions used by several investigators for some fruits, as for its disinfestation and extension of shelf life. (Author)

Bibliographical Services Throughout the World 1965-69.

Science.gov (United States)

Avicenne, Paul, Comp.

Two major sections comprise this first in a projected series of bibliographies and reference works on documentation, libraries, and archives. The series will be published by the United Nations Educational, Scientific, and Cultural Organization (UNESCO) and is intended to replace UNESCO's series of bibliographical handbooks. Part I of this volume…

Modeling RHIC using the standard machine formal accelerator description

International Nuclear Information System (INIS)

Pilat, F.; Trahern, C.G.; Wei, J.

1997-01-01

The Standard Machine Format (SMF) is a structured description of accelerator lattices which supports both the hierarchy of beam lines and generic lattice objects as well as those deviations (field errors, alignment efforts, etc.) associated with each component of the as-installed machine. In this paper we discuss the use of SMF to describe the Relativistic Heavy Ion Collider (RHIC) as well as the ancillary data structures (such as field quality measurements) that are necessarily incorporated into the RHIC SMF model. Future applications of SMF are outlined, including its use in the RHIC operational environment

Using Bibliographic Knowledge for Ranking in Scientific Publication Databases

CERN Document Server

Vesely, Martin; Le Meur, Jean-Yves

2008-01-01

Document ranking for scientific publications involves a variety of specialized resources (e.g. author or citation indexes) that are usually difficult to use within standard general purpose search engines that usually operate on large-scale heterogeneous document collections for which the required specialized resources are not always available for all the documents present in the collections. Integrating such resources into specialized information retrieval engines is therefore important to cope with community-specific user expectations that strongly influence the perception of relevance within the considered community. In this perspective, this paper extends the notion of ranking with various methods exploiting different types of bibliographic knowledge that represent a crucial resource for measuring the relevance of scientific publications. In our work, we experimentally evaluated the adequacy of two such ranking methods (one based on freshness, i.e. the publication date, and the other on a novel index, the ...

CHESS BOOKS IN SPAIN (1900-1939: A BIO-BIBLIOGRAPHIC DIRECTORY AND A BIBLIOMETRIC STUDY

Directory of Open Access Journals (Sweden)

Jordi Brasó Rius

2016-03-01

Full Text Available The work presents a description and analysis of chess books in Spain in the period 1900 to 1939. The tools used have been the main database of the Spanish libraries, along with bibliographical indexes of the subject matter. This has been contextualized with secondary sources. This allows us to locate the works analyzed in the social context of the time. Subsequently, a bibliometric statistical analysis used to assess and interpret issues of authorship, place of publication, publishers, years of increased circulation of works or controlling specific contents of the contributions. The results are useful to check that Barcelona and Madrid topped the printing of books. Also it manifests high Spanish and foreign production around the year 30. Other data is remarkable the informative function that had the most publications.

[Bibliometric study of the journal Nutrición Hospitalaria for the period 2001--2005: Part 2, consumption analysis; the bibliographic references].

Science.gov (United States)

Castera, V T; Sanz Valero, J; Juan-Quilis, V; Wanden-Berghe, C; Culebras, J M; García de Lorenzo y Mateos, A

2008-01-01

To describe and assess the consumption of the information consulted and cited in the articles published in the journal Nutrición Hospitalaria for the period 2001--2005 by means of bibliometric analysis. Cross-sectional descriptive analysis of the results obtained from the analysis of the lists of bibliographic references of the articles published at Nutrición Hospitalaria. We studied the most cited journals, the signatures index, the type of document referred, the publication language, the distribution of geographical origin, and obsolescence and readiness index. We took into account all types of documents with the exception of Communications to Congresses. 345 articles were published at Nutr Hosp, containing 8,113 bibliographic references, with a median of 18, a maximum of 136 and minimum of 0 BR per article. The mean (rate of publications per published article during the specified period) is 23.52 (95% IC 20.93-26.10) and the mean at 5% is 20.66 per article. The 25th and 75th percentiles are 6 and 32, respectively, the interquartile interval being 26 BR per document. The semi-period of Burton and Kebler is 7 years and the Price Index is 38.18%. The bibliographic references, the consumption of information, of the articles published at Nutrición Hospitalaria present parameters similar to other journals on health science. However, good data on obsolescence are observed, which reveal the good validity of most of the references studied.

[Small cell neuroendocrine tumour of the bladder: with reference to a case and bibliographical revision].

Science.gov (United States)

Lahoz Tornos, A; Marrón Penón, Maria C; Pardo López, Maria L; Nogueras Gimeno, M A; Pujol Obis, E; Del Villar Sordo, V

2006-09-01

The small cell neuroendocrine tumour is an infrecuent neoplasia, with inmunohistochemistry being the key to diagnosis. We present a new case making reference to treatment and its evolution there after. The clinic, diagnosis and treatment of this tumour is described. Bibliographical revision follours. The neuroendocrine tumour of small cell is an infrecuent neoplasia, in which the inmunohistochemistry study is key in the diagnosis. The differential diagnosis includes the high degree diferentiation transitionals cells carcinoma and primary and secondary linfoma. The standard treatment is based on chemotherapy plus surgery.

Bibliographic Instruction and the Development of Online Catalogs.

Science.gov (United States)

McDonald, David R.; Searing, Susan E.

1983-01-01

Discusses the definition of an online library catalog; five factors to be considered by the online catalog designer; user-computer communication (error messages, help screens, prompts, unnatural language); online tutorials and offline instruction offered by bibliographic instruction librarians; and the current situation. Nine references are…

Expertise finding in bibliographic network: topic dominance learning approach.

Science.gov (United States)

Neshati, Mahmood; Hashemi, Seyyed Hadi; Beigy, Hamid

2014-12-01

Expert finding problem in bibliographic networks has received increased interest in recent years. This problem concerns finding relevant researchers for a given topic. Motivated by the observation that rarely do all coauthors contribute to a paper equally, in this paper, we propose two discriminative methods for realizing leading authors contributing in a scientific publication. Specifically, we cast the problem of expert finding in a bibliographic network to find leading experts in a research group, which is easier to solve. We recognize three feature groups that can discriminate relevant experts from other authors of a document. Experimental results on a real dataset, and a synthetic one that is gathered from a Microsoft academic search engine, show that the proposed model significantly improves the performance of expert finding in terms of all common information retrieval evaluation metrics.

Stress wave emission: a bibliographical survey No 2

International Nuclear Information System (INIS)

Lucia, A.C.; Galli, M.

1976-01-01

This report gives an inventory of papers and publications which deal with stress wave emission (ultrasonic emission). This bibliography is up date until end of 1974. It contains also titles of papers published before 1973 but not contained in our first bibliographical report (EUR--5616e)

Bibliographic data base on atomic and molecular data

International Nuclear Information System (INIS)

Itikawa, Yukikazu.

1983-03-01

A comparative study is made on three bibliographic data bases: INSPEC, ORNL - AMPIC, GAPHYOR. An on - line retrieval is carried out for searching a number of specific atomic and molecular data. Characteristics of each data base are clarified and suggestions are given for use of those data bases. (author)

Larynx cancer in early stages: bibliographic review

International Nuclear Information System (INIS)

Umana Herrera, Vanessa

2014-01-01

A bibliographical analysis on the subject of early laryngeal cancer (neoplams staged as Tis, T1-T2 N0) was carried out through a bibliographic review of updated articles. The anatomy, epidemiology, generalities, clinical presentation and behavior of cancer were described. The biopsy, the clinical history, the physical examination and radiodiagnostic studies are used for a correct staging and according to the stage, to select the appropriate treatment. Treatment modalities and prescription dose for this type of cancer are compared and explained. The locoregional evaluation of glottic cancer is performed by Computed Axial Tomography (CAT), Nuclear Magnetic Resonance (NMR), Ultrasound (US) and Positron Emission Tomography-Computed Tomography (PET/CT). CAT and NMR have shown to be more accurate in the evaluation of glottic larynx cancer compared with clinical endoscopic examination alone. CAT, NMR, US and PET/CT were clearly more sensitive and specific in the assessment of the neck that only palpation. The preservation of the voice is an important parameter in choosing a therapeutic modality. Radiotherapy has proven to be the most used and known treatment. Radiation therapy with Cobalt 60 is commonly used in Costa Rica for the treatment of early larynx cancer [es

Bibliographic Instruction in a Step-by-Step Approach.

Science.gov (United States)

Soash, Richard L.

1992-01-01

Describes an information search process based on Kuhlthau's model that was used to teach bibliographic research to ninth grade students. A research test to ensure that students are familiar with basic library skills is presented, forms for helping students narrow the topic and evaluate materials are provided, and a research process checklist is…

Video in Non-Formal Education: A Bibliographical Study.

Science.gov (United States)

Lewis, Peter M.

Intended to inform United Nations member states about the application of electronic recording and replaying devices in the nonformal education domain, this bibliographic study surveys the literature on video. Since the study is meant to be of particular use to decision makers in developing countries, video projects in North America and Western…

Indexing Linked Bibliographic Data with JSON-LD, BibJSON and Elasticsearch

Directory of Open Access Journals (Sweden)

Thomas Johnson

2013-01-01

Full Text Available Linked Data is a powerful tool for sharing bibliographic metadata. By combining the decentralization of the web with the use of globally defined metadata vocabularies, data from many sources can be treated as a single, aggregated graph. Supporting search across these distributed data sources within the same application, however, requires considerable work in vocabulary alignment and data transformation. Aggregate systems must convert data into a unified model which must (almost inevitably be generic at the expense of the structure and granularity of the original data. This paper presents a novel solution for representing and indexing bibliographic resources that retains the data integrity and extensibility of Linked Data while supporting fast, customizable indexes in an application-friendly data format. The methodology makes use of JSON-LD to represent RDF graphs in JSON suitable for indexing with Elasticsearch. BibJSON is used as a common index format capable of handling a wide range of library resources. Since all three technologies (RDF/JSON-LD, BibJSON and Elasticsearch share an emphasis on extensibility, it is possible to create an index of bibliographic data that is both generalized and flexible enough to handle Linked Data from multiple sources.

Directory of selected forestry-related bibliographic data bases

Science.gov (United States)

Peter A. Evans

1979-01-01

This compilation lists 117 bibliographic data bases maintained by scientists of the Forest Service, U.S. Department of Agriculture. For each data base, the following information is provided; name of the data base; originator; date started; coverage by subject; geographic area, and size of collection; base format; retrieval format; ways to query; who to query; and...

Anomalies, Weinberg angle and a noncommutative geometric description of the standard model

International Nuclear Information System (INIS)

Scheck, F.

1992-01-01

The conditions on weak hypercharge assignments of quarks and leptons that are imposed by the absence of chiral anomalies, are identical with the supertrace conditions that appear in descriptions of the minimal standard model based on noncommutative geometry. Even though in these approaches there is no more explicit symmetry in the electroweak sector than the well-known SU(2) L xU(1), the noncommutative, graded algebra characterized by the modified exterior (Cartan and discrete) derivative is stringent enough to fix - at the classical level - the Weinberg angle. With the usual fermion content of the standard model the value typical for grand unified theories is found. (orig.)

The bibliographical documentation in the Nuclear Regulatory Authority

International Nuclear Information System (INIS)

Carregado, M.A.

1998-01-01

Full text: The presentation of the following work serves to display the recourses which the Information Center (I.C.) - Ezeiza Sector of the Nuclear Regulatory Authority of the Argentine Republic possesses. These recourses help the investigation and application of the regulatory subject as well as the scientific technical community, which uses the information about radiation protection and nuclear safety. Periodical publications, reports, books, standards, etc., are specified quantitatively in detail. Mainly, the automated means are emphasized in order to get to safe ways of information. Data bases in CD-ROM are also enumerated. These are now essential in order to track down the expert information on each theme. The most outstanding ones among these data bases are: INIS, Nuclear Science Abstracts, Nuclear Regulatory Library, Medline and Poltox. Some recourses for obtaining important documents are mentioned, e.g.: The British Library, HMSO and NTIS, as well as addresses of institutions, catalogues of publication on Internet, etc., which allow an easy access to the bibliography required. An evaluation of periodical publications by the Information Center is carried out, as well as information about users connected to the request of bibliographical searches and documents. (author) [es

Subject categories and scope descriptions

International Nuclear Information System (INIS)

2002-01-01

This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

Bibliographic survey of medium energy inclusive reaction data

International Nuclear Information System (INIS)

Arthur, E.D.; Madland, D.G.; McClellan, D.M.

1986-04-01

A bibliographic survey of inclusive reaction data (experimental and theoretical) for several projectile types having energies between 50 and 1000 MeV has been completed. Approximately one thousand references selected from this survey describe the current state of knowledge for particle-induced inclusive reaction data. The search covered data for the following projectiles: p, d, t, 3 He, 4 He, and lithium ions

Communication in a Diverse Classroom: An Annotated Bibliographic Review

Science.gov (United States)

Brown, Rachelle

2016-01-01

Students have social and personal needs to fulfill and communicate these needs in different ways. This annotated bibliographic review examined communication studies to provide educators of diverse classrooms with ideas to build an environment that contributes to student well-being. Participants in the studies ranged in age, ability, and cultural…

Using the Microcomputer to Generate Materials for Bibliographic Instruction.

Science.gov (United States)

Hendley, Gaby G.

Guide-worksheets were developed on a word processor in a high school library for bibliographic instruction of English and social studies students to cover the following reference sources: Facts on File; Social Issues Resource Series (S.I.R.S.); Editorial Research Reports; Great Contemporary Issues (New York Times), which also includes Facts on…

Contextualization of topics: browsing through the universe of bibliographic information

NARCIS (Netherlands)

Koopman, Rob; Wang, Shenghui; Scharnhorst, Andrea

2017-01-01

This paper describes how semantic indexing can help to generate a contextual overview of topics and visually compare clusters of articles. The method was originally developed for an innovative information exploration tool, called Ariadne, which operates on bibliographic databases with tens of

Locating and parsing bibliographic references in HTML medical articles.

Science.gov (United States)

Zou, Jie; Le, Daniel; Thoma, George R

2010-06-01

The set of references that typically appear toward the end of journal articles is sometimes, though not always, a field in bibliographic (citation) databases. But even if references do not constitute such a field, they can be useful as a preprocessing step in the automated extraction of other bibliographic data from articles, as well as in computer-assisted indexing of articles. Automation in data extraction and indexing to minimize human labor is key to the affordable creation and maintenance of large bibliographic databases. Extracting the components of references, such as author names, article title, journal name, publication date and other entities, is therefore a valuable and sometimes necessary task. This paper describes a two-step process using statistical machine learning algorithms, to first locate the references in HTML medical articles and then to parse them. Reference locating identifies the reference section in an article and then decomposes it into individual references. We formulate this step as a two-class classification problem based on text and geometric features. An evaluation conducted on 500 articles drawn from 100 medical journals achieves near-perfect precision and recall rates for locating references. Reference parsing identifies the components of each reference. For this second step, we implement and compare two algorithms. One relies on sequence statistics and trains a Conditional Random Field. The other focuses on local feature statistics and trains a Support Vector Machine to classify each individual word, followed by a search algorithm that systematically corrects low confidence labels if the label sequence violates a set of predefined rules. The overall performance of these two reference-parsing algorithms is about the same: above 99% accuracy at the word level, and over 97% accuracy at the chunk level.

Plutonium: resuspension of aerosols in nuclear installations: bibliographic survey

International Nuclear Information System (INIS)

Guetat, Ph.; Monfort, M.; Armand, P.; Alloul-Marmor, L.

2006-01-01

This document presents an analysis and a bibliographical synthesis of the studies on resuspension factors for plutonium. It aims at helping the engineers of safety to specify the scenarios of accidents which relate to their activities and to bring elements justified for the definition of their term-source 'installation' in the safety reports of the installations. (authors)

Urinary stress incontinence in postpartum women. Bibliographic review

Directory of Open Access Journals (Sweden)

Jose Manuel Barranco Cuadros

2017-11-01

Full Text Available Introduction: Both pregnancy and childbirth are important risk factors for urinary stress incontinence in women. For its prevention, exercies of the pelvic floor musculature have been shown to be effective. Guidelines for urinary stress incontinence management recommend offering pelvic floor muscle training to women during their first pregnancy as a preventive measure. Objective: To update the information provided in the scientific literature on urinary stress incontinence during postpartum and possible forms of treat it. Methodology: A systematic bibliographic review was carried out in the following databases: PUBMED, COCHRANE, CINHAL, MEDLINE, SciELO and SCOPUS. The date was restricted to the last 5 years (2012-2017, in Spanish, English and Portuguese. Restrictions were made regarding the type of study, and Randomized Clinical Trials (RCTs were considered for this review. Results: After reviewing the literature consulted, it is concluded that the training of the pelvic floor musculature is beneficial to prevent the occurrence of urinary stress incontinence during pregnancy and the postpartum period. Conclusions: The results obtained in this review are consistent with previous studies and bibliographic reviews of the same topic. It follows that training of the pelvic floor muscles is beneficial in preventing the occurrence of urinary stress incontinence during pregnancy or postpartum.

Les bases de données bibliographiques pour l'exploration et la production des hydrocarbures Bibliographic Data Bases for Hydrocarbon Prospection and Production

Directory of Open Access Journals (Sweden)

Chambre Syndicale du Pétrole

2006-11-01

Full Text Available Les bases de données bibliographiques accessibles en ligne sont un outil très efficace pour qui cherche des documents scientifiques et techniques, mais il faut bien les connaître pour savoir les sélectionner. Deux types de bases de données sont présentées. D'abord celles qui couvrent les différents domaines qui composent l'exploration et la production des hydrocarbures : géologie, géophysique, forage, production et récupération assistée, économie et actualités, énergie et environnement. Ensuite, celles qui couvrent un type particulier de document : brevets, rapports, thèses, actes de congrès, normes et spécifications, livres, traductions, citations. Des fiches descriptives répertorient les caractéristiques des bases de données présentées dans chacune des sections. Bibliographic data bases accessible online make a very effective tool for searching for scientific and technical documents, but a thorough understanding of them is required if they are to be selected properly. Two types of data bases are described. The first ones cover different fields involved in hydrocarbon prospection and production: geology, geophysical prospecting, drilling, production and enhanced recovery, economics and current events, energy, environment. Then come data bases covering a specific type of document: patents, reports, theses, conference proceedings, standards and specifications, books, translations, citations. Descriptive data sheets give an inventory of the leading characteristics of the data bases described in each section.

Analysis of a Bibliographic Database Enhanced with a Library Classification.

Science.gov (United States)

Drabenstott, Karen Markey; And Others

1990-01-01

Describes a project that examined the effects of incorporating subject terms from the Dewey Decimal Classification (DDC) into a bibliographic database. It is concluded that the incorporation of DDC and possibly other library classifications into online catalogs can enhance subject access and provide additional subject searching strategies. (11…

Knowledge evolution in physics research: An analysis of bibliographic coupling networks.

Directory of Open Access Journals (Sweden)

Wenyuan Liu

Full Text Available Even as we advance the frontiers of physics knowledge, our understanding of how this knowledge evolves remains at the descriptive levels of Popper and Kuhn. Using the American Physical Society (APS publications data sets, we ask in this paper how new knowledge is built upon old knowledge. We do so by constructing year-to-year bibliographic coupling networks, and identify in them validated communities that represent different research fields. We then visualize their evolutionary relationships in the form of alluvial diagrams, and show how they remain intact through APS journal splits. Quantitatively, we see that most fields undergo weak Popperian mixing, and it is rare for a field to remain isolated/undergo strong mixing. The sizes of fields obey a simple linear growth with recombination. We can also reliably predict the merging between two fields, but not for the considerably more complex splitting. Finally, we report a case study of two fields that underwent repeated merging and splitting around 1995, and how these Kuhnian events are correlated with breakthroughs on Bose-Einstein condensation (BEC, quantum teleportation, and slow light. This impact showed up quantitatively in the citations of the BEC field as a larger proportion of references from during and shortly after these events.

Construction of a bibliographic information database and a web directory for the nuclear science and engineering

Energy Technology Data Exchange (ETDEWEB)

Oh, Jeong Hoon; Kim, Tae Whan; Lee, Ji Ho; Chun, Young Chun; Yu, An Na

2005-11-15

The objective of this project is to construct the bibliographic information database and the web directory in the nuclear field. Its construction is very timely and important. Because nuclear science and technology has an considerable effect all over the other sciences and technologies due to its property of giant and complex engineering. We aimed to firmly build up a basis of efficient management of the bibliographic information database and the web directory in the nuclear field. The results of this project that we achieved in this year are as follows : first, construction of the bibliographic information database in the nuclear field(the target title: 1,500 titles ; research report: 1,000 titles, full-text report: 250 titles, full-text article: 250 titles). Second, completion of construction of the web directory in the nuclear field by using SWING (the total figure achieved : 2,613 titles). We plan that we will positively give more information to the general public interested in the nuclear field and to the experts of the field through this bibliographic information database on KAERI's home page, KAERI's electronic library and other related sites as well as participation at various seminars and meetings related to the nuclear field.

The Role Of Computer In Bibliographic Control Of Locally Published ...

African Journals Online (AJOL)

The Nigerian society has become sophisticated and need a variety of information to carry out its activities successfully. This paper emphasis the role of National Library as the only institution backed by legal deposit decree to act as the National Bibliographic Agency of Nigeria. This paper highlights the supposed role of ...

Functional Requirements for Bibliographic Records: An Investigation of Two Prototypes

Science.gov (United States)

Pisanski, Jan; Zumer, Maja

2007-01-01

Purpose: This paper aims to establish how the Functional Requirements for Bibliographic Records (FRBR) conceptual model, which holds a lot of potential in theory, works in practice. It also aims to identify, and if possible, give solutions to problems found in two of the existing prototypes. Design/methodology/approach: An independent evaluation…

A Half-Built Bridge: The Unfinished Work of Bibliographic Instruction.

Science.gov (United States)

Jacobson, Trudi E.; Vallely, John R.

1992-01-01

Discussion of bibliographic instruction (BI) in academic libraries focuses on a search of the literature in nonlibrary journals that was conducted to determine the significance of BI to those outside the library profession, especially faculty. The need for library-faculty cooperation is discussed, and the authorship of BI articles is examined. (23…

A New Browser-based, Ontology-driven Tool for Generating Standardized, Deep Descriptions of Geoscience Models

Science.gov (United States)

Peckham, S. D.; Kelbert, A.; Rudan, S.; Stoica, M.

2016-12-01

Standardized metadata for models is the key to reliable and greatly simplified coupling in model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System). This model metadata also helps model users to understand the important details that underpin computational models and to compare the capabilities of different models. These details include simplifying assumptions on the physics, governing equations and the numerical methods used to solve them, discretization of space (the grid) and time (the time-stepping scheme), state variables (input or output), model configuration parameters. This kind of metadata provides a "deep description" of a computational model that goes well beyond other types of metadata (e.g. author, purpose, scientific domain, programming language, digital rights, provenance, execution) and captures the science that underpins a model. While having this kind of standardized metadata for each model in a repository opens up a wide range of exciting possibilities, it is difficult to collect this information and a carefully conceived "data model" or schema is needed to store it. Automated harvesting and scraping methods can provide some useful information, but they often result in metadata that is inaccurate or incomplete, and this is not sufficient to enable the desired capabilities. In order to address this problem, we have developed a browser-based tool called the MCM Tool (Model Component Metadata) which runs on notebooks, tablets and smart phones. This tool was partially inspired by the TurboTax software, which greatly simplifies the necessary task of preparing tax documents. It allows a model developer or advanced user to provide a standardized, deep description of a computational geoscience model, including hydrologic models. Under the hood, the tool uses a new ontology for models built on the CSDMS Standard Names, expressed as a collection of RDF files (Resource Description Framework). This ontology is based on core concepts

From ISIS to CouchDB: Databases and Data Models for Bibliographic Records

Directory of Open Access Journals (Sweden)

Luciano Ramalho

2011-04-01

Full Text Available For decades bibliographic data has been stored in non-relational databases, and thousands of libraries in developing countries still use ISIS databases to run their OPACs. Fast forward to 2010 and the NoSQL movement has shown that non-relational databases are good enough for Google, Amazon.com and Facebook. Meanwhile, several Open Source NoSQL systems have appeared. This paper discusses the data model of one class of NoSQL products, semistructured, document-oriented databases exemplified by Apache CouchDB and MongoDB, and why they are well-suited to collective cataloging applications. Also shown are the methods, tools, and scripts used to convert, from ISIS to CouchDB, bibliographic records of LILACS, a key Latin American and Caribbean health sciences index operated by the Pan-American Health Organization.

Bibliographic work of Ivan Franjo Jukić and the end of cultural history. Bibliographies as a source for the history of books and cultural history

Directory of Open Access Journals (Sweden)

Slavko Harni

2009-04-01

Full Text Available Bosnian Franciscan Ivan Franjo Jukić (1818-1857 died a hundred and fifty years ago. He was one of the most prominent figures in the 19th century cultural life of Bosnia and Herzegovina, credited with the development of a wide-ranging set of aspects of cultural life in Bosnia and Herzegovina, organised in the unpropitious conditions of the Turkish occupation. Among other things, he studied the non-religious cultural history of Bosnia and Herzegovina and, in particular, the literary work of his Franciscan predecessors who were active in pastoral work for many years on the entire Croatian cultural territory and, in some periods, outside this territory. Preaching in the tongue of the people, they contributed greatly to the standardisation of the Croatian language and to the development and use of bosanica as a specific form of the Croatian Cyrillic script. Jukić was one of the first, if not the first Croatian student of this script. The study of bosanica was an inspiration to him to collect and bibliographically describe books written in this script and, also, books written in the Latin script. Thus emerged the core of his text, Bosnian Literature, which is in fact a general bibliography of Bosnia and Herzegovina. It was the first book to set as a criterion the secular and not the religious borders of Bosnia. The text was published in two installments in the first literary journal in Bosnia and Herzegovina, Bosanski prijatelj, started and edited by Jukić. The paper is to commemorate the anniversary of his death. It provides an insight into the results of the bibliographic, cultural and historic study of Jukić’s text. The bibliographic study focuses on the bibliographic structure, bibliographic descriptions and on the criteria applied in the selection of the material. The bibliographic features are analysed as part of the cultural and historic context, in the synchronic and diachronic sense of the word. The method applied in the contextualised

A bibliographic survey of bearings for nuclear reactors

International Nuclear Information System (INIS)

Nemoto, Masaaki; Okamoto, Yoshizo

1977-03-01

In development of a multi-purpose high-temperature gas cooled reactor, design of its mechanical elements is essential. Machinery must be safely operable in the high temperature (1,000 0 C), high pressure (40kg/cm 2 ) helium environment for long time. A bibliographic review in this connection with technical reports, books, journals and patents, is presented, using NSA. As an element of the machinery bearings are classified into several categories, a bibliography on gas-lubricated bearings for 207 documents is given in chronical order. (auth.)

Application of Bibliographic Coupling versus Cited Titles Words in Patent Fuzzy Clustering

Directory of Open Access Journals (Sweden)

Anahita Kermani

2013-03-01

Full Text Available Attribute selection is one of the steps before patent clustering. Various attributes can be used for clustering. In this study, the effect of using citation and citation title words, respectively, in form of bibliographic coupling and citation title words sharing, were measured and compared with each other, as patent attributes. This study was done in an experimental method, on a collection of 717 US Patent cited in the patents belong to 977/774 subclass of US Patent Classification. Fuzzy C-means was used for patent clustering and extended BCubed precision and extended BCubed recall were used as evaluation measure. The results showed that the clustering produced by bibliographic coupling had better performance than clustering used citation title words and existence of cluster structure were in a wider range of exhaustivity than citation title words.

The Cybernetics of Bibliographic Control: Toward a Theory of Document Retrieval Systems.

Science.gov (United States)

Wellisch, Hans H.

1980-01-01

Explores the concept of cataloging, analyzes its functions and operations, and holds that as a control system bibliographic organization is subject to the laws of cybernetics. The role of relevance and the limitations of some regulatory devices are examined. (FM)

ONS: an ontology for a standardized description of interventions and observational studies in nutrition.

Science.gov (United States)

Vitali, Francesco; Lombardo, Rosario; Rivero, Damariz; Mattivi, Fulvio; Franceschi, Pietro; Bordoni, Alessandra; Trimigno, Alessia; Capozzi, Francesco; Felici, Giovanni; Taglino, Francesco; Miglietta, Franco; De Cock, Nathalie; Lachat, Carl; De Baets, Bernard; De Tré, Guy; Pinart, Mariona; Nimptsch, Katharina; Pischon, Tobias; Bouwman, Jildau; Cavalieri, Duccio

2018-01-01

The multidisciplinary nature of nutrition research is one of its main strengths. At the same time, however, it presents a major obstacle to integrate data analysis, especially for the terminological and semantic interpretations that specific research fields or communities are used to. To date, a proper ontology to structure and formalize the concepts used for the description of nutritional studies is still lacking. We have developed the Ontology for Nutritional Studies (ONS) by harmonizing selected pre-existing de facto ontologies with novel health and nutritional terminology classifications. The ONS is the result of a scholarly consensus of 51 research centers in nine European countries. The ontology classes and relations are commonly encountered while conducting, storing, harmonizing, integrating, describing, and searching nutritional studies. The ONS facilitates the description and specification of complex nutritional studies as demonstrated with two application scenarios. The ONS is the first systematic effort to provide a solid and extensible formal ontology framework for nutritional studies. Integration of new information can be easily achieved by the addition of extra modules (i.e., nutrigenomics, metabolomics, nutrikinetics, and quality appraisal). The ONS provides a unified and standardized terminology for nutritional studies as a resource for nutrition researchers who might not necessarily be familiar with ontologies and standardization concepts.

A Web-Based Nuclear Criticality Safety Bibliographic Database

International Nuclear Information System (INIS)

Koponen, B L; Huang, S

2007-01-01

A bibliographic criticality safety database of over 13,000 records is available on the Internet as part of the U.S. Department of Energy's (DOE) Nuclear Criticality Safety Program (NCSP) website. This database is easy to access via the Internet and gets substantial daily usage. This database and other criticality safety resources are available at ncsp.llnl.gov. The web database has evolved from more than thirty years of effort at Lawrence Livermore National Laboratory (LLNL), beginning with compilations of critical experiment reports and American Nuclear Society Transactions

Development of a Framework for Multimodal Research: Creation of a Bibliographic Database

National Research Council Canada - National Science Library

Coovert, Michael D; Gray, Ashley A; Elliott, Linda R; Redden, Elizabeth S

2007-01-01

.... The results of the overall effort, the multimodal framework and article tracking sheet, bibliographic database, and searchable multimodal database make substantial and valuable contributions to the accumulation and interpretation of multimodal research. References collected in this effort are listed in the appendix.

Task Group on Computer/Communication Protocols for Bibliographic Data Exchange. Interim Report = Groupe de Travail sur les Protocoles de Communication/Ordinateurs pour l'Exchange de Donnees Bibliographiques. Rapport d'Etape. May 1983.

Science.gov (United States)

Canadian Network Papers, 1983

1983-01-01

This preliminary report describes the work to date of the Task Group on Computer/Communication protocols for Bibliographic Data Interchange, which was formed in 1980 to develop a set of protocol standards to facilitate communication between heterogeneous library and information systems within the framework of Open Systems Interconnection (OSI). A…

Network-based statistical comparison of citation topology of bibliographic databases

Science.gov (United States)

Šubelj, Lovro; Fiala, Dalibor; Bajec, Marko

2014-01-01

Modern bibliographic databases provide the basis for scientific research and its evaluation. While their content and structure differ substantially, there exist only informal notions on their reliability. Here we compare the topological consistency of citation networks extracted from six popular bibliographic databases including Web of Science, CiteSeer and arXiv.org. The networks are assessed through a rich set of local and global graph statistics. We first reveal statistically significant inconsistencies between some of the databases with respect to individual statistics. For example, the introduced field bow-tie decomposition of DBLP Computer Science Bibliography substantially differs from the rest due to the coverage of the database, while the citation information within arXiv.org is the most exhaustive. Finally, we compare the databases over multiple graph statistics using the critical difference diagram. The citation topology of DBLP Computer Science Bibliography is the least consistent with the rest, while, not surprisingly, Web of Science is significantly more reliable from the perspective of consistency. This work can serve either as a reference for scholars in bibliometrics and scientometrics or a scientific evaluation guideline for governments and research agencies. PMID:25263231

Mesotherapy: a bibliographical review.

Science.gov (United States)

Herreros, Fernanda Oliveira Camargo; Moraes, Aparecida Machado de; Velho, Paulo Eduardo Neves Ferreira

2011-01-01

Intradermotherapy is a medical procedure introduced by Pistor in 1958 that consists in the application of intradermal injections of diluted pharmacological substances that are given directly into the region to be treated. There are reports of the use of intradermotherapy to treat painful diseases, skin diseases and unaesthetic conditions. Medical clinics have been recently offering the treatment of intradermotherapy, using the more popular name for this practice - mesotherapy. There is only scant scientific information about this subject published in periodicals indexed on MedLine. Only a few states rigorously pursue this method. Most indexed publications about this subject deal with the complications of this technique. Unaesthetic dermatoses have been a common complaint in dermatologic clinics, and it has become necessary to have scientific evidence to give to patients. Therefore, well-researched scientific studies about this technique are necessary to offer data to medical professionals that will clearly explain to patients both the benefits and the risks of these procedures. A bibliographical review was conducted and we verified the need for new studies with adequate methods to confirm the benefits of intradermotherapy as used in dermatologic treatment.

Geoffrey Keynes's Two-Fold Vision: Medical Savant-Connoisseur and Literary Bibliographer.

Science.gov (United States)

Kutcher, Gerald

2016-10-01

During the 1920s and 1930s, the British surgeon Geoffrey Keynes (1887-1982) treated breast cancer with radium instead of the hegemonic radical mastectomy, while vehemently attacking the "radicalists" for mutilating women. Keynes was also a leading bibliographer of literary figures from Sir Thomas Browne to William Blake through Jane Austen. This article argues that these endeavors did not inhabit separate worlds, but rather his bibliographic methods of collecting and sorting were deeply interwoven with his therapeutic practices and medical ways of knowing. The article also examines the profound influence his engagement with the works of William Blake had on his battle against the reigning medical orthodoxy and on the humanity of his relationship with his patients. It concludes that Keynes' story sheds light on a now distant medico-cultural world where literary studies, often centered on book collecting and critique, were not only highly valued, but were influential in guiding the vision and behavior of a number of physicians. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A bibliographic review of public health dissemination and implementation research output and citation rates.

Science.gov (United States)

Wolfenden, Luke; Milat, Andrew J; Lecathelinais, Christophe; Skelton, Eliza; Clinton-McHarg, Tara; Williams, Christopher; Wiggers, John; Chai, Li Kheng; Yoong, Sze Lin

2016-12-01

The aim of this study was to describe the research output and citation rates (academic impact) of public health dissemination and implementation research according to research design and study type. A cross sectional bibliographic study was undertaken in 2013. All original data-based studies and review articles focusing on dissemination and implementation research that had been published in 10 randomly selected public health journals in 2008 were audited. The electronic database 'Scopus' was used to calculate 5-year citation rates for all included publications. Of the 1648 publications examined, 216 were original data-based research or literature reviews focusing on dissemination and implementation research. Of these 72% were classified as descriptive/epidemiological, 26% were intervention and just 1.9% were measurement research. Cross-sectional studies were the most common study design (47%). Reviews, randomized trials, non-randomized trials and decision/cost-effectiveness studies each represented between 6 and 10% of all output. Systematic reviews, randomized controlled trials and cohort studies were the most frequently cited study designs. The study suggests that publications that had the greatest academic impact (highest citation rates) made up only a small proportion of overall public health dissemination and implementation research output.

Guidelines for Description

NARCIS (Netherlands)

Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

2013-01-01

The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

EARS: An Online Bibliographic Search and Retrieval System Based on Ordered Explosion.

Science.gov (United States)

Ramesh, R.; Drury, Colin G.

1987-01-01

Provides overview of Ergonomics Abstracts Retrieval System (EARS), an online bibliographic search and retrieval system in the area of human factors engineering. Other online systems are described, the design of EARS based on inverted file organization is explained, and system expansions including a thesaurus are discussed. (Author/LRW)

The Impact of Online Bibliographic Databases on Teaching and Research in Political Science.

Science.gov (United States)

Reichel, Mary

The availability of online bibliographic databases greatly facilitates literature searching in political science. The advantages to searching databases online include combination of concepts, comprehensiveness, multiple database searching, free-text searching, currency, current awareness services, document delivery service, and convenience.…

DANUBE SALMON (HUCHO HUCHO L.. THEMATIC BIBLIOGRAPHY

Directory of Open Access Journals (Sweden)

I. Hrytsynyak

2015-09-01

Full Text Available Purpose. Creating of the thematic bibliographic list of publications dedicated to ecological and zoogeographical, morphological and biological, physiological, biochemical and genetic characteristics of the Danube salmon, as well as to its cultivation in Ukraine and abroad. Methodology. In the process of systematic search complete and selective methods were applied. The bibliographic core have been formed by the literature from the fund of scientific library of the Institute of Fisheries NAAS. Findings. There was composed the thematic list of publications in a quantity of 100 sources, containing characteristics of Danube salmon as representative of salmonids. Literary sources was arranged in alphabetical order by author or title, and described according to DSTU 7.1:2006 «System of standards on information, librarianship and publishing. Bibliographic entry. Bibliographic description. General requirements and rules», as well as in accordance with the requirements of APA style – international standard of references. Practical value. The list may be useful for scientists, practitioners, students, whose area of interests covers the questions of breeding, and researching of the salmon biological features.

Bibliographic study on molybdenum biokinetics. Literaturstudie zur Biokinetik von Molybdaen

Energy Technology Data Exchange (ETDEWEB)

Erzberger, A.

1988-05-01

This bibliographical study compiles and analyzes findings about the metabolism and resorption of molybdenum. Besides including studies on the physiology of molybdenum 99, a general survey is given on molybdenum in the environment and on its physiological behaviour. In particular, information on the dependence of molybdenum resorption on various factors, such as the chemical form, antagonisms etc., are gathered from literature. These factors have to be considered for sensibly carrying out necessary experiments.

Cross-standard user description in mobile, medical oriented virtual collaborative environments

Science.gov (United States)

Ganji, Rama Rao; Mitrea, Mihai; Joveski, Bojan; Chammem, Afef

2015-03-01

By combining four different open standards belonging to the ISO/IEC JTC1/SC29 WG11 (a.k.a. MPEG) and W3C, this paper advances an architecture for mobile, medical oriented virtual collaborative environments. The various users are represented according to MPEG-UD (MPEG User Description) while the security issues are dealt with by deploying the WebID principles. On the server side, irrespective of their elementary types (text, image, video, 3D, …), the medical data are aggregated into hierarchical, interactive multimedia scenes which are alternatively represented into MPEG-4 BiFS or HTML5 standards. This way, each type of content can be optimally encoded according to its particular constraints (semantic, medical practice, network conditions, etc.). The mobile device should ensure only the displaying of the content (inside an MPEG player or an HTML5 browser) and the capturing of the user interaction. The overall architecture is implemented and tested under the framework of the MEDUSA European project, in partnership with medical institutions. The testbed considers a server emulated by a PC and heterogeneous user devices (tablets, smartphones, laptops) running under iOS, Android and Windows operating systems. The connection between the users and the server is alternatively ensured by WiFi and 3G/4G networks.

What Is Next for Functional Requirements for Bibliographic Records? A Delphi Study

Science.gov (United States)

Zhang, Yin; Salaba, Athena

2009-01-01

This article reports on a Delphi study conducted to determine key issues and challenges facing Functional Requirements for Bibliographic Records (FRBR) research and practice. The Delphi panel consisted of thirty-three experts in the field who participated in a three-round issue-raising and consensus-building process via a Web-based survey…

The Teaching Model through Problem-Based Learning in a Course on Bibliographic Research

Directory of Open Access Journals (Sweden)

Ruth Cristina Hernández-Ching

2018-02-01

Full Text Available The experience of applying problem-based learning (PBL technique in the Bibliographic Research course from a Bachelor of English study plan of a public university during the first half of 2014 is shared. The investigation aimed to answer the following question: Does the problem-based learning technique in the Bibliographic Research course allows to implement the main tenets of the teaching model: epistemological foundation, learning theory, methodology and didactics, and communication processes? The research approach proposed was qualitative, and triangulation for measuring variables was implemented. The following instruments were applied: observation, experience record books, and focus groups. Furthermore, formative learning was measured by means of an online survey. Results of the instruments were categorized using technology-based tools such as Wordle (observation, NVivo (record books and MindNode (focus groups. A convenience sampling was used to collect data from eight students enrolled in the Bibliographic Research course, ten students of Integrated English II for non-English majors, and the researcher, as professor of the courses. It was determined that the PBL technique permitted to reach the main tenets of the teaching model. It was identified that the teacher was the main learner, and the one who benefited from the process, since a culture of knowledge, throughout the course, was created. It was also concluded that this technique allowed to develop twenty-first century skills. It would be valuable to quantify whether the development of the four basic skills of English, especially the conversation one, improves using the technique along with technologies.

A-state- of-the-art report on construction of a bibliographic information database for the ETDE

International Nuclear Information System (INIS)

Oh, Jeong Hoon; Kim, Tae Whan; Yi, Ji Ho; Choi, Kwang; Chun, Young Chun; Yoo, Jae Bok; Yoo, An Na

2001-11-01

This report describes A State-of-the-Art Report on Construction of a Bibliographic Information Database for the ETDE(Energy Technology Data Excahange). In the energy technology, the data was selected materials, taken necessary information from it. The analyized materials was inputted according to input rule of ETDE format and verified input software (WinFIBRE). With the help of the National Energy information Consortium composed of 8 organizations, domestic information have been gathered and submitted to ETDE/OA for the exchange of bibliographic information. ETDE database is expected to help energy technology information users for their R and D and improvement of energy efficiency through ETIS system

A case study: forming an effective quality management system according to ISO 9000 standards

OpenAIRE

Zağyapan, Orhan

1995-01-01

Ankara : The Faculty of Management and the Graduate School of Business Administration of Bilkent Univ., 1995. Thesis (Master's) -- Bilkent University, 1995. Includes bibliographical references leaves 87-88 In today's world, companies which adopt themselves to certain internationally recognized standards are one step ahead of their competitors. ISO 9000 Quality System Standards captured the most attention among all. The aim of the standard is to provide an international bench...

INIS-based Japanese literature materials of bibliographic tools for human resource development

International Nuclear Information System (INIS)

Kunii, Katsuhiko; Gonda, Mayuki; Ikeda, Kiyoshi; Nagaya, Shun; Itabashi, Keizo; Nakajima, Hidemitsu; Mineo, Yukinobu

2011-01-01

The Library of the Japan Atomic Energy Agency (JAEA) has developed two Japanese literature materials of bibliographic tools based on the International Nuclear Information System (INIS) of the IAEA which contains over 3.3 million records of 127 countries and 24 international organizations. These materials have been elaborated by appropriately designating Japanese terminology of nuclear field corresponding with English terminology or vice versa. One is 'Transliterated Japanese journal title list' and the other is 'INIS Thesaurus in Japanese'. While the former is served as a reference that enables users to access articles of Japanese journals better matching their needs, the latter is served as a dictionary to bridge the gap on nuclear field terminologies between over 30,000 English terms and Japanese terms which correspond with those in a semantic manner. The application of those materials to the INIS's full text collection over 280,000 of technical reports, proceedings etc. as an archive is helpful for enhancement of human resource development. The authors describe the effectiveness of those INIS-based materials with bibliographic references of Fukushima Daiichi NPS accident. (author)

Identifying FRBR Work-Level Data in MARC Bibliographic Records for Manifestations of Moving Images

Directory of Open Access Journals (Sweden)

Lynne Bisko

2008-12-01

Full Text Available The library metadata community is dealing with the challenge of implementing the conceptual model, Functional Requirements for Bibliographic Records (FRBR. In response, the Online Audiovisual Catalogers (OLAC created a task force to study the issues related to creating and using FRBR-based work-level records for moving images. This article presents one part of the task force's work: it looks at the feasibility of creating provisional FRBR work-level records for moving images by extracting data from existing manifestation-level bibliographic records. Using a sample of 941 MARC records, a subgroup of the task force conducted a pilot project to look at five characteristics of moving image works. Here they discuss their methodology; analysis; selected results for two elements, original date (year and director name; and conclude with some suggested changes to MARC coding and current cataloging policy.

Cambrian archaeocyathan metazoans: revision of morphological characters and standardization of genus descriptions to establish an online identification tool

Directory of Open Access Journals (Sweden)

Adeline Kerner

2011-11-01

Full Text Available Archaeocyatha represent the oldest calcified sponges and the first metazoans to build bioconstructions in association with calcimicrobes. They are a key group in biology, evolutionary studies, biostratigraphy, paleoecology and paleogeography of the early Cambrian times. The establishing of a new standardized terminology for archaeocyathans description has permitted the creation of the first knowledge base in English including descriptions of all archaeocyathan genera. This base, using the XPER² software package, is an integral part of the -Archaeocyatha- a knowledge base website, freely available at url http://www.infosyslab.fr/archaeocyatha. The website is composed of common information about Archaeocyatha, general remarks about the knowledge base, the description of the 307 genera recognized with images of type-specimens of type-species for each genus, as well as additional morphological data, an interactive free access key and its user guide.The automatic analysis and comparison of the digitized descriptions have identified some genera with highly similar morphology. These results are a great help for future taxonomic revisions and suggest a number of possible synonymies that require further study.

Interactive bibliographical database on color

Science.gov (United States)

Caivano, Jose L.

2002-06-01

The paper describes the methodology and results of a project under development, aimed at the elaboration of an interactive bibliographical database on color in all fields of application: philosophy, psychology, semiotics, education, anthropology, physical and natural sciences, biology, medicine, technology, industry, architecture and design, arts, linguistics, geography, history. The project is initially based upon an already developed bibliography, published in different journals, updated in various opportunities, and now available at the Internet, with more than 2,000 entries. The interactive database will amplify that bibliography, incorporating hyperlinks and contents (indexes, abstracts, keywords, introductions, or eventually the complete document), and devising mechanisms for information retrieval. The sources to be included are: books, doctoral dissertations, multimedia publications, reference works. The main arrangement will be chronological, but the design of the database will allow rearrangements or selections by different fields: subject, Decimal Classification System, author, language, country, publisher, etc. A further project is to develop another database, including color-specialized journals or newsletters, and articles on color published in international journals, arranged in this case by journal name and date of publication, but allowing also rearrangements or selections by author, subject and keywords.

Ref2RIS: Importing Word-Processed Bibliographies into Bibliographic Management Software

OpenAIRE

Deborah Fitchett

2012-01-01

Many who would benefit the most from timesaving bibliographic managers hesitate to adopt the technology due to the difficulties in importing legacy bibliographies developed over years. Existing shortcuts rely on manual reformatting or on re-searching online databases for the records - often almost as laborious as retyping the references. Ref2RIS was developed to automate the task of converting a bibliography in specific citation styles from common word processing document formats into the wid...

CSNI International standard problems (ISP). Brief descriptions (1975-1999)

International Nuclear Information System (INIS)

2000-03-01

analytical working communities on an international level. Moreover, they enable code users to improve their ability, gain experience and demonstrate their competence. Technical proposals originating from laboratories in 13 countries were submitted and adopted serving as experimental background for the international activity. An activity complementary to the ISP programme but not directly related to it is the establishment of comprehensive sets of experimental data for use in validating proper code application by experts other than code developers. Known as a Code Validation Matrix, the results of such an extensive list of experiments are collected and stored in the NEA Data Bank for the purpose that they be made available to Member countries wishing to validate relevant codes. ISP tests are important elements of validation matrices for thermal-hydraulic codes. In the field of containment behaviour it has been recommended to preferably base a general code validation matrix on containment-related ISPs as well. The way of organizing ISP exercises has been described in CSNI Report No. 17, CSNI Standard Problem Procedures, revised for the third time in November 1989. The following report in some detail summarises the main objectives, the underlying experimental background and the main findings and conclusions of the ISPs to provide interested groups an overview on the accumulated experience in this matter. The document, which has been reviewed by members of CSNI's Principal Working on Coolant System Behaviour (PWG2) and Principal Working on Confinement of Accidental Radioactive Releases (PWG4), summarises systematically the main features of all International Standard Problem exercises organised so far, from ISP-1 to ISP-43, namely: - Objectives of the ISP; - Brief Description of the Facility; - Scaling Information; - Parameters Offered for Comparison; - Dominating Experimental Uncertainties; - Findings; - Recommendations; - Total Duration of the ISP exercise; - Participation

Passage-Based Bibliographic Coupling: An Inter-Article Similarity Measure for Biomedical Articles

Science.gov (United States)

Liu, Rey-Long

2015-01-01

Biomedical literature is an essential source of biomedical evidence. To translate the evidence for biomedicine study, researchers often need to carefully read multiple articles about specific biomedical issues. These articles thus need to be highly related to each other. They should share similar core contents, including research goals, methods, and findings. However, given an article r, it is challenging for search engines to retrieve highly related articles for r. In this paper, we present a technique PBC (Passage-based Bibliographic Coupling) that estimates inter-article similarity by seamlessly integrating bibliographic coupling with the information collected from context passages around important out-link citations (references) in each article. Empirical evaluation shows that PBC can significantly improve the retrieval of those articles that biomedical experts believe to be highly related to specific articles about gene-disease associations. PBC can thus be used to improve search engines in retrieving the highly related articles for any given article r, even when r is cited by very few (or even no) articles. The contribution is essential for those researchers and text mining systems that aim at cross-validating the evidence about specific gene-disease associations. PMID:26440794

Passage-Based Bibliographic Coupling: An Inter-Article Similarity Measure for Biomedical Articles.

Directory of Open Access Journals (Sweden)

Rey-Long Liu

Full Text Available Biomedical literature is an essential source of biomedical evidence. To translate the evidence for biomedicine study, researchers often need to carefully read multiple articles about specific biomedical issues. These articles thus need to be highly related to each other. They should share similar core contents, including research goals, methods, and findings. However, given an article r, it is challenging for search engines to retrieve highly related articles for r. In this paper, we present a technique PBC (Passage-based Bibliographic Coupling that estimates inter-article similarity by seamlessly integrating bibliographic coupling with the information collected from context passages around important out-link citations (references in each article. Empirical evaluation shows that PBC can significantly improve the retrieval of those articles that biomedical experts believe to be highly related to specific articles about gene-disease associations. PBC can thus be used to improve search engines in retrieving the highly related articles for any given article r, even when r is cited by very few (or even no articles. The contribution is essential for those researchers and text mining systems that aim at cross-validating the evidence about specific gene-disease associations.

Enriching Traditional Cataloging for Improved Access to Information:Library of Congress Tables of Contents Projects

Directory of Open Access Journals (Sweden)

John D. Byrum Jr.

2006-03-01

Full Text Available Traditionally, standard catalog records have provided bibliographic data that mostly address the basic features of library resources. At the same time, catalogs have offered access to these records through a limited array of names, titles, series, subject headings, class numbers, and a relatively small number of keywords contained within descriptions. Today’s catalog users expect access to information well beyond what can be offered by traditional approaches to bibliographic description and access. By pursuing a suite of projects, the Library of Congress (LC has responded to the challenge of enticing patrons to continue to include the online catalog among the tools they use for information retrieval. Drawing extensively on the power of automation, staff of LC’s Bibliographic Enrichment Advisory Team (BEAT have created and implemented a variety of initiatives to link researchers, catalogs, and Web resources; increase the content of the catalog record; and link the catalog to electronic resources. BEAT’s ongoing work demonstrates how, in the electronic era, it is possible to provide new and improved ways to capitalize on traditional services in the digital age. This paper will illustrate these points by focusing on BEAT’s tables of contents projects to demonstrate how library automation can make significant bibliographic enhancement efforts quick, easy, and affordable to achieve.

Features and Prospects of Bibliographic Control of Publications on Archaeological Costume and Textile

Directory of Open Access Journals (Sweden)

Zhabreva Anna E.

2017-12-01

Full Text Available The article analyzes the issues of interrelations between the supplementary scientific branch bibliography with archaeology and history of the costume, as well as the dependence of the bibliographic support of the Archaeological Costume and Textiles topic on the evolution of archaeological knowledge. The author formulates the primary tasks and issues of identification and systematization of data, and notification of specialists. The article contains examples of primary retrospective bibliographic publications and describes the specific features of their application. It also features an analysis of the RSCI (Russian Science Citation Index as a tool for identifying publications on archaeological costume and textile. The authors confirm the absence of a ‘core’ of periodicals and the distribution of publications on this topic across a wide range of scientific journals. They suggest to organize the ongoing notification in the form of publishing the annual lists of new books and articles on the pages of a single most of organization of current information in the form of publication of annual lists of new books and articles on the pages of a core journal.

Absorptive Capacity, Alliance Portfolios and Innovation Performance: an Analytical Model Based on Bibliographic Research

Directory of Open Access Journals (Sweden)

Teresia Diana Lewe van Aduard de Macedo-Soares

2016-10-01

Full Text Available The objective of this article is to present a model for analysing the role of absorptive capacity in the relationship between strategic alliance portfolios and innovation performance based on the results of bibliographic research on the subject published between 2000 and 2015. The research was carried out in three stages, involving both quantitative - bibliometric and bibliographic coupling - and qualitative content analyses.  AP management capabilities were found to have a fundamental moderating role in the AP–IP relationship, and amongst these capabilities AC was highlighted by several authors. However, its role was found to vary according to AP characteristics, notably AP diversity – functional, geographic and institutional, but also centrality, size, stability and volume of resources, alliance and partner types as well as country type: emerging versus developed economies. This research formed the basis for the development of the model and the formulation of some propositions that focused on emerging countries.

A Framework for the Flexible Content Packaging of Learning Objects and Learning Designs

Science.gov (United States)

Lukasiak, Jason; Agostinho, Shirley; Burnett, Ian; Drury, Gerrard; Goodes, Jason; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper presents a platform-independent method for packaging learning objects and learning designs. The method, entitled a Smart Learning Design Framework, is based on the MPEG-21 standard, and uses IEEE Learning Object Metadata (LOM) to provide bibliographic, technical, and pedagogical descriptors for the retrieval and description of learning…

Diseno y desarrollo de una base de datos bibliograficos (Design and Development of a Bibliographic Database).

Science.gov (United States)

Mattenella, L. E.; Velazco, J. W.

1992-01-01

This article briefly describes the development of bibliographic retrieval systems in the Instituto de Beneficio di Minerales (IN BE MI) in Salta, Argentina, using the Mini-micro CDS/ISIS software developed by Unesco. (LRW)

New ICT in the Peruvian Andes: Theoretical Foundation and Bibliographical Balance

Directory of Open Access Journals (Sweden)

Mario Sánchez-Dávila

2016-04-01

Full Text Available On the one hand, this paper explains the theoretical foundations on which this proposal for digital anthropology in the Peruvian Andes is based (on the origins of digital anthropology, discussions on oral and written technology, and theories of digital technology as social practice. And, on the other hand, this paper presents a bibliographical balance of the studies on the new ICT in the Peruvian Andes (on identity expression, productive development and formal education in the Andean world.

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

A standard description and costing methodology for the balance-of-plant items of a solar thermal electric power plant. Report of a multi-institutional working group

Science.gov (United States)

1983-01-01

Standard descriptions for solar thermal power plants are established and uniform costing methodologies for nondevelopmental balance of plant (BOP) items are developed. The descriptions and methodologies developed are applicable to the major systems. These systems include the central receiver, parabolic dish, parabolic trough, hemispherical bowl, and solar pond. The standard plant is defined in terms of four categories comprising (1) solar energy collection, (2) power conversion, (3) energy storage, and (4) balance of plant. Each of these categories is described in terms of the type and function of components and/or subsystems within the category. A detailed description is given for the BOP category. BOP contains a number of nondevelopmental items that are common to all solar thermal systems. A standard methodology for determining the costs of these nondevelopmental BOP items is given. The methodology is presented in the form of cost equations involving cost factors such as unit costs. A set of baseline values for the normalized cost factors is also given.

Dynamic energy converters using an outer heat source for ground uses. Bibliographic study

International Nuclear Information System (INIS)

Bousquet, Jean-Louis du

1969-01-01

This short bibliographical review presents the main dynamical conversion systems operating with an outer heat source, used for power ranges of a few hundreds Watts to a few hundreds kilowatts and dedicated to ground uses. The study has three parts: recollection of thermodynamic cycles; review of some present or projected realizations; a critical study for selecting converter components (turbine, reciprocating engine, thermodynamical fluid) [fr

Investigation of fruit irradiation: bibliographical review; Investigacion de irradiacion de frutas: revision bibliografica

Energy Technology Data Exchange (ETDEWEB)

Luna C, P C

1991-01-15

It was carried out a bibliographical review that embraces the years 1984-1987, on the relating works to the irradiation of some fruits like the apple, date, peach, plum, cherry, papaya, grape, banana, pear and strawberry. The purpose is to have a reference on the doses and the conditions used by several investigators for some fruits, as for its disinfestation and extension of shelf life. (Author)

A 9-year analysis of bibliographical trends for journals in the subject category of general and internal medicine.

Science.gov (United States)

Foo, Jong Yong Abdiel

2009-05-01

For academic research outcomes, an important bibliometric scoring termed as the journal impact factor (JIF) is used when assessment of the quality of research is required. No known study has been conducted to explore the bibliographical trends of 'Medicine, General & Internal' journals indexed by the annual Journal Citation Reports. Data from the Journal Citation Reports and Web of Science database were extracted to formulate a comprehensive analysis. In this study, the trends of 15 journals (5 top ranked and 10 low ranked; 5 English and 5 non-English based) were selected and analysed over a 9-year period (starting from year 1999 to 2007). Using the year 1999 as the base year, the results showed that the JIF rose significantly for the selected top ranked journals (up to 180.9%) while the low ranked ones slipped in their JIF value (down to -44.4%). The observed upward or downward trend was caused by a combination of other bibliographical measures like citations, number of citable, and total items published. It is postulated that changes in bibliographical trends can be classified as editorial and non-editorial influences. The impacts of these influences on the 15 selected journals over the 9-year period were also discussed retrospectively.

Slavery Service Accounting Practices in Brazil: A Bibliographic and Document Analysis

Directory of Open Access Journals (Sweden)

Adriana Rodrigues Silva

2014-12-01

Full Text Available This study focuses on the social and economic aspects and institutional relationships that determined a unique pattern of inequality. We aim to examine the particular role of accounting as a practice used to dehumanize an entire class of people. The primary purpose of this study is not to examine slavery's profitability but rather to identify how accounting practices served slavery. A qualitative research method is applied in this study. Regarding technical procedures, this study makes use of bibliographic and documentary sources. For the purpose of this investigation, and in accordance with bibliographic and documentary research methods, we analyze scientific articles, books and documents from the Brazilian National Archive, the Brazilian Historic and Geographic Institute and the Brazilian National Library Foundation. In light of what was discovered through the study's development, we can consider accounting as a tool that is more active than passive and, therefore, as a tool that was used to support the slave regime. In essence, accounting was used to convert a human's qualitative attributes into a limited number of categories (age, gender, race, through which slaves were differentiated and monetized to facilitate commercial trafficking. We believe that accounting practices facilitated slave trading, conversion and exploitation, procedures that completely ignored qualitative and human dimensions of slavery. Opportunities for future studies on accounting in the slave period, as is the case of other oppressive regimes, are infinite, especially in the case of Brazil.

Tomo-synthesis. Bibliographic study report

International Nuclear Information System (INIS)

2016-01-01

Tomo-synthesis is a recent technique for breast imaging. This technique, qualified as 'pseudo-3D', draws the attention of health professionals. Indeed, this technique could offer a gain in sensibility and in specificity in the detection of breast cancers compared to 2D mammography, thanks to the reduction of the tissues' overlapping in particular. Although its place and its clinical indication are not still clearly defined, tomo-synthesis is already used in France. The introduction of this technique within the national breast cancer screening program, seems to be foreseen by the authorities in the coming years. IRSN, in the scope of its mission of evaluation of the dose impact of innovative techniques, is closely interested in this technique and has proceeded in 2015 to a bibliographical review of the state of the art in tomo-synthesis. This review paid specific attention to the following points: conception of the installations, dose, image quality and quality control. it has highlighted several points of attention, which incite IRSN to formulate certain recommendations to accompany the spreading of this new technique in France. Most of the clinical trials validating the use of tomo-synthesis were realized on systems of a single manufacturer. However, manufacturers' strategies of design are heterogeneous. There is no unique technique of tomo-synthesis but several, of which equivalence in terms of technical and clinical performances is not demonstrated. Due to the heterogeneity of the different models available on the French market, IRSN recommends not to extrapolate the results of clinical studies obtained on a specific system but to consolidate them for all the available systems. In many imaging departments, tomo-synthesis is already implemented in addition or in substitution of 2D mammography without any regulatory quality control and periodic technical checks. The European reference standard for quality control of these devices is not yet

Boarding by CT of adrenal masses: bibliographic revision

International Nuclear Information System (INIS)

Castillo Solano, David

2014-01-01

Adrenal masses and the usefulness of computed tomography were extensively studied for the distinction of benign pathology over malignant pathology. This has resulted extremely important because of the clinical and prognostic implications for patients with these lesions. The search for the most relevant information was made regarding the suprarenal pathology and the usefulness of computed tomography as a diagnostic method. Articles were searched in the main medical bibliographical bases like MD-Consult and Med Line; as well as the main radiology journals: Radiology, Radiographics, Clinic of North America and American Journal of Roetnology in a period between 1987 and 2012. The most relevant bibliography was chosen and in the diagnosis by image were reviewed the existing protocols on abdominal pathology. Costa Rica is found without statistics on suprarenal masses, being useful for future researchers who are interested in the subject [es

THE BURBOT (LOTA LOTA L., 1758. THEMATIC BIBLIOGRAPHY

Directory of Open Access Journals (Sweden)

I. Hrytsynyak

2016-06-01

Full Text Available Purpose. Composing a thematic bibliographic list of publications dedicated to biological characteristics of burbot of different ecological and zoographical zones, as well as to the aspects of its cultivation and fishing in Ukraine and abroad. Methods. In the process of systematic search when preparing this publication, we applied both complete and selective methods. The bibliographic core was formed of literature sources on the abovementioned topic from the fund of the scientific library of the Institute of Fisheries NAAS. Findings. A list of 65 sources containing characteristics of burbot as a representative of Lotidae family have been formed from the fund of the scientific library of the Institute of Fisheries NAAS for the period from 1927 to 2016. The literary sources were arranged in alphabetical order by author or title and described according to DSTU 7.1:2006 «System of standards on information, librarianship and publishing. Bibliographic entry. Bibliographic description. General requirements and rules», as well as in accordance with the requirements of APA style – international standard of references. Practical value. The list may be useful for scientists, practitioners, students, whose area of ​​interests covers the questions of cultivation, fishing, and research of the biological features of Lotidae family.

Bibliographic Displays in OPACs and Web Catalogs: How Well Do They Comply with Display Guidelines?

Science.gov (United States)

Cherry, Joan M.

1998-01-01

Evaluation of data from assessments of full bibliographic displays in academic library OPACs (online public access catalogs) and World Wide Web catalogs against a checklist of desirable features found that OPAC displays scored 58% and Web displays scored 60%. Discusses weaknesses, focusing on those found in the majority of the displays…

The social effectiveness of small and medium-sized entities standard from the view point of Game Theory

Directory of Open Access Journals (Sweden)

Alexandre Gonzales

2013-05-01

Full Text Available Accounting has been undergoing significant changes, and among these changes is the creation of a standard for the accounting of small and medium enterprises, in line with international accounting standards for companies of this size. This rule arose from the development of a pronouncement by the Accounting Pronouncements Committee – CPC, which subsequently was approved by the Federal Accounting Council - CFC through specific resolutions. The present study aimed to analyze trends of accounting professionals and business managers concerning the adoption of Technical Pronouncement emitted by Accounting Pronouncements Committee for Small and Medium Enterprises. Considering the level of complexity of the operations performed by companies of this size, the lack of oversight by specific entities and the question of enforcement of these pronouncements, it was used the game theory to determine possible strategies adopted by the accountants and business managers regarding to the effective adoption of pronouncement for SMEs. The study was characterized as a descriptive research, using bibliographical and field research. With the use of surveys sought to identify the perceptions of accounting professionals regarding the adoption of the pronouncement. It was found that this statement constitutes a valid legal standard, endowed with legal effectiveness and technical efficiency, but lacking social effectiveness, due to the low level of efforts for its adoption, both by accounting professionals and by firms.

[Nursing care to the client with hypertension: a bibliographic review].

Science.gov (United States)

Moura, Denizielle de Jesus Moreira; Bezerra, Sara Taciana Firmino; Moreira, Thereza Maria Magalhães; Fialho, Ana Virgínia de Melo

2011-01-01

This study aimed to identify the nursing care practices to the client with hypertension in the scientific production in the last ten years. It was carried out a bibliographic study, using in the BIREME, the LILACS, SciELO and BDENF's data basis, selecting thirty articles. The results were exposed in charts, tables and graphics, where prevails, in the literature analyzed, the nursing consultation as the more used practice, through the nursing attendance systematization and the Health Education with individual approaches, besides the realization of home visits with family approach. One believes that the systematization of nursing care will contribute in an expressive manner to the adhesion to the antihypertensive treatment.

Reliability and reproducibility of subaxial cervical injury description system: a standardized nomenclature schema.

Science.gov (United States)

Bono, Christopher M; Schoenfeld, Andrew; Gupta, Giri; Harrop, James S; Anderson, Paul; Patel, Alpesh A; Dimar, John; Aarabi, Bizhan; Dailey, Andrew; Vaccaro, Alexander R; Gahr, Ralf; Shaffrey, Christopher; Anderson, David G; Rampersaud, Raj

2011-08-01

Radiographic measurement study. To develop a standardized cervical injury nomenclature system to facilitate description, communication, and classification among health care providers. The reliability and reproducibility of this system was then examined. Description of subaxial cervical injuries is critical for treatment decision making and comparing scientific reports of outcomes. Despite a number of available classification systems, surgeons, and researchers continue to use descriptive nomenclature, such as "burst" and "teardrop" fractures, to describe injuries. However, there is considerable inconsistency with use of such terms in the literature. Eleven distinct injury types and associated definitions were established for the subaxial cervical spine and subsequently refined by members of the Spine Trauma Study Group. A series of 18 cases of patients with a broad spectrum of subaxial cervical spine injuries was prepared and distributed to surgeon raters. Each rater was provided with the full nomenclature document and asked to select primary and secondary injury types for each case. After receipt of the raters' first round of classifications, the cases were resorted and returned to the raters for a second round of review. Interrater and intrarater reliabilities were calculated as percent agreement and Cohen kappa (κ) values. Intrarater reliability was assessed by comparing a given rater's diagnosis from the first and second rounds. Nineteen surgeons completed the first and second rounds of the study. Overall, the system demonstrated 56.4% interrater agreement and 72.8% intrarater agreement. Overall, interrater κ values demonstrated moderate agreement while intrarater κ values showed substantial agreement. Analyzed by injury types, only four (burst fractures, lateral mass fractures, flexion teardrop fractures, and anterior distraction injuries) demonstrated greater than 50% interrater agreement. This study demonstrated that, even in ideal circumstances, there is

Descriptive statistics.

Science.gov (United States)

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

Information Needs and Bibliographic Problems of the Anthropology Departments at U. N. C. and Duke University.

Science.gov (United States)

Spurling, Norman Kent

Research was conducted on information needs and bibliographic problems of anthropologists at Duke University and the University of North Carolina at Chapel Hill. Sixty-four faculty members and graduate students were surveyed, and twenty faculty members were interviewed. Many areas of information retrieval problems and the different ways…

[The importance of a bibliographic analysis in the magazines published by Revista Rol de Enfermeria"].

Science.gov (United States)

Lorente Gallego, A M; Chaín-Navarro, C; Flores Martín, J A

2007-06-01

This article is a preview of a project whose objective is to carry out a bibliographical analysis of the articles bearing scientific information included in the "ROL de Enfermeria" magazine over the past five years. This magazine started publication in 1978 and has as its goal contributing to the spread of scientific knowledge in the Nursing field.

RDA in Turchia: percezioni e aspettative sull'implementazione

Directory of Open Access Journals (Sweden)

Doğan Atılgan

2015-05-01

Full Text Available Integration of user-generated content with library catalogs is a remarkable point with the developments in web technologies and semantic networks. In the light of these developments, library catalogs are linked with open data resources like VIAF, DBpedia and amazon.com with the aim of bibliographic description via URI based structures. On the other hand "Resource Description and Access" (RDA, as a new cataloging standard, supports libraries for their bibliographic description studies by increasing access points. Furthermore, many initiatives have been launched by countries who would like to keep themselves up-to-date by using and implementing RDA in their library catalogs. In this context, developing catalogers' opinions and perceptions regarding of RDA implementations is of great importance. In this study, it is aimed to reveal the requirements, awareness and perceptions of catalogers in academic libraries in Turkey about RDA implementations. The contents of this paper were originally presented at the international conference FSR 2014 "Faster, Smarter, Richer: Reshaping the library Catalogue", held in Rome, 27-28 February 2014.

[The use of bibliographic information resources and Web 2.0 by neuropaediatricians].

Science.gov (United States)

González de Dios, Javier; Camino-León, Rafael; Ramos-Lizana, Julio

2011-06-16

To determine the state of knowledge and use of the main sources of bibliographic information and Web 2.0 resources in a sample of pediatricians linked professionally to child neurology. Anonymous opinion survey to 44 pediatricians (36 neuropediatric staffs and 8 residents) with two sections: sources of bibliographic information: (25 questions) and Web 2.0 resources (14 questions). The most consulted journals are Revista de Neurología and Anales de Pediatría. All use PubMed database and less frequently Índice Médico Español (40%) and Embase (27%); less than 20% use of other international and national databases. 81% of respondents used the Cochrane Library, and less frequently other sources of evidence-based medicine: Tripdatabase (39%), National Guideline Clearinghouse (37%), Excelencia Clínica (12%) and Sumsearch (3%). 45% regularly receive some e-TOC (electronic table of contents) of biomedical journals, but only 7% reported having used the RSS (really system syndication). The places to start searching for information are PubMed (55%) and Google (23%). The four resources most used of Web 2.0 are YouTube (73%), Facebook (43%), Picasa (27%) and blogs (25%). We don't found differences in response between the group of minus or equal to 34 and major or equal to 35 years. Knowledge of the patterns of use of information databases and Web 2.0 resources can identify the limitations and opportunities for improvement in the field of pediatric neurology training and information.

Research in constraint-based layout, visualization, CAD, and related topics : a bibliographical survey

OpenAIRE

Hower, Walter; Graf, Winfried H.

1995-01-01

The present work compiles numerous papers in the area of computer-aided design, graphics, layout configuration, and user interfaces in general. There is nearly no conference on graphics, multimedia, and user interfaces that does not include a section on constraint-based graphics; on the other hand most conferences on constraint processing favour applications in graphics. This work of bibliographical pointers may serve as a basis for a detailed and comprehensive survey of this important and ch...

The Strategic Environment Assessment bibliographic network: A quantitative literature review analysis

Energy Technology Data Exchange (ETDEWEB)

Caschili, Simone, E-mail: s.caschili@ucl.ac.uk [UCL QASER Lab, University College London, Gower Street, London WC1E 6BT (United Kingdom); De Montis, Andrea; Ganciu, Amedeo; Ledda, Antonio; Barra, Mario [Dipartimento di Agraria, University of Sassari, viale Italia, 39, 07100 Sassari (Italy)

2014-07-01

Academic literature has been continuously growing at such a pace that it can be difficult to follow the progression of scientific achievements; hence, the need to dispose of quantitative knowledge support systems to analyze the literature of a subject. In this article we utilize network analysis tools to build a literature review of scientific documents published in the multidisciplinary field of Strategic Environment Assessment (SEA). The proposed approach helps researchers to build unbiased and comprehensive literature reviews. We collect information on 7662 SEA publications and build the SEA Bibliographic Network (SEABN) employing the basic idea that two publications are interconnected if one cites the other. We apply network analysis at macroscopic (network architecture), mesoscopic (sub graph) and microscopic levels (node) in order to i) verify what network structure characterizes the SEA literature, ii) identify the authors, disciplines and journals that are contributing to the international discussion on SEA, and iii) scrutinize the most cited and important publications in the field. Results show that the SEA is a multidisciplinary subject; the SEABN belongs to the class of real small world networks with a dominance of publications in Environmental studies over a total of 12 scientific sectors. Christopher Wood, Olivia Bina, Matthew Cashmore, and Andrew Jordan are found to be the leading authors while Environmental Impact Assessment Review is by far the scientific journal with the highest number of publications in SEA studies. - Highlights: • We utilize network analysis to analyze scientific documents in the SEA field. • We build the SEA Bibliographic Network (SEABN) of 7662 publications. • We apply network analysis at macroscopic, mesoscopic and microscopic network levels. • We identify SEABN architecture, relevant publications, authors, subjects and journals.

The Strategic Environment Assessment bibliographic network: A quantitative literature review analysis

International Nuclear Information System (INIS)

Caschili, Simone; De Montis, Andrea; Ganciu, Amedeo; Ledda, Antonio; Barra, Mario

2014-01-01

Academic literature has been continuously growing at such a pace that it can be difficult to follow the progression of scientific achievements; hence, the need to dispose of quantitative knowledge support systems to analyze the literature of a subject. In this article we utilize network analysis tools to build a literature review of scientific documents published in the multidisciplinary field of Strategic Environment Assessment (SEA). The proposed approach helps researchers to build unbiased and comprehensive literature reviews. We collect information on 7662 SEA publications and build the SEA Bibliographic Network (SEABN) employing the basic idea that two publications are interconnected if one cites the other. We apply network analysis at macroscopic (network architecture), mesoscopic (sub graph) and microscopic levels (node) in order to i) verify what network structure characterizes the SEA literature, ii) identify the authors, disciplines and journals that are contributing to the international discussion on SEA, and iii) scrutinize the most cited and important publications in the field. Results show that the SEA is a multidisciplinary subject; the SEABN belongs to the class of real small world networks with a dominance of publications in Environmental studies over a total of 12 scientific sectors. Christopher Wood, Olivia Bina, Matthew Cashmore, and Andrew Jordan are found to be the leading authors while Environmental Impact Assessment Review is by far the scientific journal with the highest number of publications in SEA studies. - Highlights: • We utilize network analysis to analyze scientific documents in the SEA field. • We build the SEA Bibliographic Network (SEABN) of 7662 publications. • We apply network analysis at macroscopic, mesoscopic and microscopic network levels. • We identify SEABN architecture, relevant publications, authors, subjects and journals

Assesment of access to bibliographic databases and telemetry databases in Astronomy: A groundswell for development.

Science.gov (United States)

Diaz-Merced, Wanda Liz; Casado, Johanna; Garcia, Beatriz; Aarnio, Alicia; Knierman, Karen; Monkiewicz, Jacqueline; Alicia Aarnio.

2018-01-01

Big Data" is a subject that has taken special relevance today, particularly in Astrophysics, where continuous advances in technology are leading to ever larger data sets. A multimodal approach in perception of astronomical data data (achieved through sonification used for the processing of data) increases the detection of signals in very low signal-to-noise ratio limits and is of special importance to achieve greater inclusion in the field of Astronomy. In the last ten years, different software tools have been developed that perform the sonification of astronomical data from tables or databases, among them the best known and in multiplatform development are Sonification Sandbox, MathTrack, and xSonify.In order to determine the accessibility of software we propose to start carrying out a conformity analysis of ISO (International Standard Organization) 9241-171171: 2008. This standard establishes the general guidelines that must be taken into account for accessibility in software design, and it is applied to software used in work, public places, and at home. To analyze the accessibility of web databases, we take into account the "Web Content Content Accessibility Guidelines (WCAG) 2.0", accepted and published by ISO in the ISO / IEC 40500: 2012 standard.In this poster, we present a User Centered Design (UCD), Human Computer Interaction (HCI), and User Experience (UX) framework to address a non-segregational provision of access to bibliographic databases and telemetry databases in Astronomy. Our framework is based on an ISO evaluation on a selection of data bases such as ADS, Simbad and SDSS. The WCAG 2.0 and ISO 9241-171171: 2008 should not be taken as absolute accessibility standards: these guidelines are very general, are not absolute, and do not address particularities. They are not to be taken as a substitute for UCD, HCI, UX design and evaluation. Based on our results, this research presents the framework for a focus group and qualitative data analysis aimed to

Searching Harvard Business Review Online. . . Lessons in Searching a Full Text Database.

Science.gov (United States)

Tenopir, Carol

1985-01-01

This article examines the Harvard Business Review Online (HBRO) database (bibliographic description fields, abstracts, extracted information, full text, subject descriptors) and reports on 31 sample HBRO searches conducted in Bibliographic Retrieval Services to test differences between searching full text and searching bibliographic record. Sample…

Black carp (Mylopharyngodon piceus, Richardson. Thematic bibliography

Directory of Open Access Journals (Sweden)

I. Hrytsynyak

2017-03-01

Full Text Available Purpose. Creating a thematic bibliographic list of publications in Ukrainian and Russian, dedicated to the ecology, biology, selection and cultivation of such Far East fish fauna species as black carp (Mylopharyngodon piceus Richardson in conditions of fish farms of Ukraine and neighboring countries, as well as the possibility of it introduction into water bodies for bioameliorative purpose. Methodology. The complete and selective methods were applied in the process of the systematic search. The bibliographic core has been formed with the literature from the fund of the scientific library of the Institute of Fisheries NAAS. Findings. There was composed a thematic list of publications with a total quantity of 67 sources, containing characteristics of black carp as representative of cyprinids, which is very important species from the point of view of aquaculture. This bibliography covers the time period from 1949 till 2011.The literary sources were arranged in alphabetical order by author or title, and described according to DSTU 7.1:2006 «System of standards on information, librarianship and publishing. Bibliographic entry. Bibliographic description. General requirements and rules», as well as in accordance with the requirements of APA style — international standard of references. Practical value. The list may be useful for scientists, practitioners, students, whose area of interests covers the questions of breeding and study of the biological features of black carp.

Distributed and Conditional Documents: Conceptualizing Bibliographical Alterities

Directory of Open Access Journals (Sweden)

Johanna Drucker

2014-11-01

Full Text Available To conceptualize a future history of the book we have to recognize that our understanding of the bibliographical object of the past is challenged by the ontologically unbound, distributed, digital, and networked conditions of the present. As we draw on rich intellectual traditions, we must keep in view the need to let go of the object-centered approach that is at the heart of book history. My argument begins, therefore, with a few assertions. First, that we have much to learn from the scholarship on Old and New World contact that touches on bibliography, document studies, and book history for formulating a non-object centered conception of what a book is. Second, that the insights from these studies can be usefully combined with a theory of the “conditional” document to develop the model of the kinds of distributed artifacts we encounter on a daily basis in the networked conditions of current practices. Finally, I would suggest that this model provides a different conception of artifacts (books, documents, works of textual or graphic art, one in which reception is production and therefore all materiality is subject to performative engagement within varied, and specific, conditions of encounter.

Bibliographic data on surface processes in particle-material interactions published in Japan, 1986-1987

International Nuclear Information System (INIS)

Gesi, Kazuo; Nagai, Siro; Ozawa, Kunio.

1989-01-01

Data on surface processes in particle-material interactions for fusion technology have been surveyed and collected over 24 publications which have been published during January, 1986 - December, 1987 in Japan. The bibliographic data in the form of data sheets were sent to the International Data Center in IAEA. This report presents 97 selected data sheets arranged in the order of codes of relevant phenomena. A list of literature is given. (author) 159 refs

Internal interface: I/O communication with FPGA circuits and hardware description standard for applications in HEP and FEL electronics ver. 1.0

International Nuclear Information System (INIS)

Pozniak, K.T.

2005-01-01

The work describes hardware layer of the universal, parameterized communication interface for application in the FPGA chips. The interface is called in this work as the ''Internal Interface'' or in short the ''II''. The paper shows how to automatically create the address and data space, according to the user declarations. The methods to standardize the I/O communication with FPGA chips are described. The communication uses library functions and standardized, parametric components in VHDL. Theoretical background and technical description of the Internal Interface are illustrated with a few easy examples of simple interfaces. (orig.)

A bibliographical review on the radiolysis of uranyl nitrate solutions in nitric acid medium

International Nuclear Information System (INIS)

Siri, Sandra; Mondino, Angel V.

2004-01-01

A bibliographical study on the effects of ionizing radiation on uranyl nitrate solutions in nitric acid medium was performed, and the state of knowledge on this subject is presented. The main experimental and theoretical results on water, nitric acid and uranium solutions radiolysis are reviewed and critically evaluated. This paper provides a collection of references as an aid to the development of practical applications, and to stimulate new research on fundamental processes in these systems. (author) [es

Radionuclide migration study in the case of a geological disposal site. Bibliographic research report

International Nuclear Information System (INIS)

Rio, Sophie

1997-01-01

The present bibliographic research deals with the study of radionuclide migration in the case of a geological disposal of spent fuel from PWR nuclear reactors. Bibliography was made with the DIALOG server on the following databases: INSPEC, NTIS, Ei Compendex Plus, SPIN, SciSearch, Pascal et Current Contents Search, and with the INIS and DocTheses CD-Roms. A synthesis based on a few documents is made in the second part of the report. (author) [fr

Bibliographic study of photophysical and photochemical properties of laser dyes

International Nuclear Information System (INIS)

Doizi, D.

1986-06-01

Laser isotope separation of uranium requires high power and precise wave length. This report is a bibliographic and experimental study of the photophysical and photochemical properties of seven commercial laser dyes which have an emission wavelength in the range 5500-6500 A: Rhodamine 110 or 560, rhodamine 6G or 590, rhodamine B or 610, rhodamine 101 or 640, sulforhodamine B or kiton red 620, sulforhodamine 101 or 640 and DCM or LC 6500. Absorption and emission cross section values, fluorescence lifetimes and quantum yields in various solvents are indicated. For each dye, a non exhaustive list of laboratory experiments made with two types of pump sources: Nd YAG (532) and copper vapor laser is given. When it is known, the toxicity of the dyes is mentioned [fr

Simplified application of electronic data processing in a natural science and technology special library in combination with an improved literature description

Energy Technology Data Exchange (ETDEWEB)

Bretnuetz, E.

1975-10-01

A pilot project in a special library for natural science and technology to record bibliographic data on several kinds of literature within a simplified scheme and to process them in a computer by simple programs is described. The printout consists of several lists arranged according to several aspects. At the same time a relevant thesaurus is tested as to its suitability for an improved description of the literature. The results show that the literature handled is identified sufficiently within this simplified scheme. After supplementation by some special terms, the thesaurus can be used for a deeper analysis of the literature. (auth)

Standards in neurosonology. Part I

Directory of Open Access Journals (Sweden)

Joanna Wojcza

2015-09-01

Full Text Available The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specifi c brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler. Part II and III are devoted to standards for specifi c clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-toleft shunts, confi rmation of the arrest of the cerebral circulation, an assessment of the functional effi ciency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity.

Standards in neurosonology. Part III

Directory of Open Access Journals (Sweden)

Joanna Wojczal

2016-06-01

Full Text Available The paper presents standards related to ultrasound imaging of the cerebral vasculature and structures. The aim of this paper is to standardize both the performance and description of ultrasound imaging of the extracranial and intracranial cerebral arteries as well as a study of a specific brain structure, i.e. substantia nigra hyperechogenicity. The following aspects are included in the description of standards for each ultrasonographic method: equipment requirements, patient preparation, study technique and documentation as well as the required elements of ultrasound description. Practical criteria for the diagnosis of certain pathologies in accordance with the latest literature were also presented. Furthermore, additional comments were included in some of the sections. Part I discusses standards for the performance, documentation and description of different ultrasound methods (Duplex, Doppler. Part II and III are devoted to standards for specific clinical situations (vasospasm, monitoring after the acute stage of stroke, detection of a right-to-left shunts, confirmation of the arrest of the cerebral circulation, an assessment of the functional efficiency of circle of Willis, an assessment of the cerebrovascular vasomotor reserve as well as the measurement of substantia nigra hyperechogenicity.

Truebounded, Overbounded, or Underbounded? Scientists’ Personal Publication Lists versus Lists Generated through Bibliographic Information Services

Directory of Open Access Journals (Sweden)

Isabelle Dorsch

2018-02-01

Full Text Available A truebounded publication list of a scientific author consists of exactly all publications that meet two criteria: (1 they are formally published (e.g., journal article or proceeding paper; (2 they have scientific, scholarly, or academic content. A publication list is overbounded if it includes documents which do not meet the two criteria (such as novels; a publication list is underbounded if it is incomplete. Are authors’ personal publication lists, found on their personal sites on the Internet or in institutional repositories, truebounded, overbounded, or underbounded? And are the respective publication lists generated through bibliographic information services truebounded, overbounded, or underbounded? As case studies, publications of nine International Society of Scientometrics and Informetrics (ISSI Committee members (published between 2007 and 2016 were collected to create preferably complete personal publication lists according to the two criteria. We connect the “relative visibility of an author” with the concepts of truebounded, overbounded, and underbounded publication lists. The authors’ relative visibility values were determined for the information services Web of Science (WoS, Scopus, and Google Scholar and compared to the relative visibility of the authors’ personal publication lists. All results of the bibliographic information services are underbounded. Relative visibility is highest in Google Scholar, followed by Scopus and WoS.

The outbreak of SARS mirrored by bibliometric mapping: Combining bibliographic coupling with the complete link cluster method

Directory of Open Access Journals (Sweden)

Bo Jarneving

2007-01-01

Full Text Available In this study a novel method of science mapping is presented which combines bibliographic coupling, as a measure of document-document similarity, with an agglomerative hierarchical cluster method. The focus in this study is on the mapping of so called ‘core documents’, a concept presented first in 1995 by Glänzel and Czerwon. The term ‘core document’ denote documents that have a central position in the research front in terms of many and strong bibliographic coupling links. The identification and mapping of core documents usually requires a large multidisciplinary research setting and in this study the 2003 volume of the Science Citation Index was applied. From this database, a sub-set of core documents reporting on the outbreak of SARS in 2002 was chosen for the demonstration of the application of this mapping method. It was demonstrated that the method, in this case, successfully identified interpretable research themes and that iterative clustering on two subsequent levels of cluster agglomeration may provide with useful and current information.

Internal interface: I/O communication with FPGA circuits and hardware description standard for applications in HEP and FEL electronics ver. 1.0

Energy Technology Data Exchange (ETDEWEB)

Pozniak, K.T. [Warsaw Univ. of Technology (Poland). Inst. of Electronic Systems ELHEP Laboratory

2005-07-01

The work describes hardware layer of the universal, parameterized communication interface for application in the FPGA chips. The interface is called in this work as the ''Internal Interface'' or in short the ''II''. The paper shows how to automatically create the address and data space, according to the user declarations. The methods to standardize the I/O communication with FPGA chips are described. The communication uses library functions and standardized, parametric components in VHDL. Theoretical background and technical description of the Internal Interface are illustrated with a few easy examples of simple interfaces. (orig.)

Bibliographic review on sinonasal inverted papilloma

International Nuclear Information System (INIS)

Benavides Vilchez, Juan Vicente

2014-01-01

Surgical management recommendations, the index of recurrence and malignancy of the sinonasal inverted papilloma were identified through a bibliographic review of publications from 2002 to 2012. In the literature reviewed several aspects were determined: the risk of recurrences and the possibility of malignization of the inverted papilloma is diminished by complete surgical resection. The actual extent of the injury must be determined in an appropriate manner. The open approaches are recommended for a better visualization of the tumor, allowing the complete resection of the lesion. Endoscopic resection is considered a posterior surgical option, to evaluate the extension of the lesion without requiring incisions in the skin, it is recommended for the treatment of lesions in early stages and as a therapeutic option for some lesions in advanced stages. The recurrence rate is lower through endoscopy in relation to traditional approaches. The unilateral nasal obstruction and the presence of a mass in the nasal cavity are clinical manifestations of the inverted papilloma, whose highest incidence occurs in men and women, between 50 and 70 years of age. By means of clinical, radiological and biopsy suspicion this pathology is confirmed. The recurrence rate is 22% in a period of time from eight to 48 months after the initial surgery. The rate of malignization is 10%, which usually occurs between six and 60 months from the diagnosis of papilloma until the appearance of carcinoma [es

Description logic rules

CERN Document Server

Krötzsch, M

2010-01-01

Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

Study of the rise of gas bubbles in a viscous liquid. Stability and speed. Bibliographical study

International Nuclear Information System (INIS)

Dahan, Gilbert

1969-01-01

This short thesis reports a bibliographical study on the movement of gas bubbles in viscous liquids. The author addresses the formation of gas bubbles in liquids of different viscosity (devices used for the formation of bubbles in viscous liquids, formation of bubbles at a hole), and the behaviour of bubbles rising in viscous liquids and more particularly the speed and shape of these bubbles [fr

Definition of an automatic information retrieval system independent from the data base used

International Nuclear Information System (INIS)

Cunha, E.R.

1983-04-01

A bibliographic information retrieval system using data stored at the standardized interchange format ISO 2709 or ANSI Z39.2, is specified. A set of comands for interchange format manipulation wich allows the data access at the logical level, achieving the data independence, are used. A data base description language, a storage structure and data base manipulation comands are specified, using retrieval techniques which consider the applications needs. (Author) [pt

Growth of Global Publishing Output of Health Economics in the Twenty-First Century: A Bibliographic Insight.

Science.gov (United States)

Jakovljevic, Mihajlo Michael; Pejcic, Ana V

2017-01-01

Strong growth of interdisciplinary sciences might find exceptional example in academic health economics. We decided to observe the quantitative output in this science since the beginning of the twenty-first century. Electronic search of the published literature was conducted in four different databases: one medical database-MEDLINE/PubMed, two general databases-Scopus/Elsevier and Web of Science (WoS), and one specialized health economic database-NHS Economic Evaluation Database (EED). The applied combination of key words was carefully chosen to cover the most commonly used terms in titles of publications dealing with conceptual areas of health economics. All bibliographic units were taken into account. Within the time horizon from January 1, 2000 to December 31, 2016, without language or limitations on bibliographic unit types, we identified an output ranging approximately from 60,345 to 88,246 records with applied search strategy in MEDLINE/PubMed, Scopus/Elsevier, and WoS. In NHS EED, we detected 14,761 records of economic evaluations of health interventions during the period in which database was maintained and regularly updated. With slightly more than one-third of the identified records, USA clearly dominates in this field. United Kingdom takes a strong second place with about 12% of identified records. Consistently, USA and UK universities are the most frequent among the top 15 affiliations/organizations of the authors of the identified records. Authors from Harvard University contributed to the largest number of the identified records. There is a clear evidence of both the upward stream of blossoming in health economics publications and its acceleration. Based on this bibliographic data set, it is difficult to distinguish the actual impact growth of this output provided dominantly by academia with modest contribution by pharmaceutical/medicinal device industry and diverse national government-based agencies. Further insight into the citation track record of

Regulatory and technical reports, compilation for 1979. Volume 4. Bibliographical report Jan-Dec 79

International Nuclear Information System (INIS)

Oliu, W.E.; McKenzie, L.; Aragon, R.

1980-07-01

The compilation lists formal regulatory and technical reports issued in 1979 by the U.S. Nuclear Regulatory Commission (NRC) staff and by NRC contractors. The compilation is divided into three major sections. The first major section consists of a sequential listing of all NRC reports in report-number order. The first portion of this sequential section lists staff reports, the second portion lists NRC-sponsored conference proceedings, and the third lists contractor reports. Each report citation in the sequential section contains full bibliographic information

Manual for cataloging and indexing documents for database acquisition

Energy Technology Data Exchange (ETDEWEB)

Schwartz, S.R.; Phillips, S.L.; Perra, J.J.

1978-07-01

The descriptive cataloging and subject indexing rules and methodology needed to process bibliographic information for GRID database storage are documented. Data elements which may appear in a bibliographic record are tabulated. Examples of coded data entry forms are included in an appendix. Examples are given of unit records in the database corresponding to one bibliographic reference. (MHR)

The Use of Bibliographical Information Media by the Borrowers at the Karolinska Institutets Bibliotek (the Library of the Karolinska Institutet)

Science.gov (United States)

Hakulinen, Erkki

1974-01-01

A survey at the Karolinska Institutet Bibliotek in Sweden, and a comparison with an earlier survey at the National Lending Library, showed that conventional bibliographical information media are still responsible for the major part of information about biomedical literature. (Author/LS)

Mexsyco project: representation of power plan control-instrumentation functions. Bibliographical analysis and conclusions; Projet Mexsyco: representation des fonctions de controle-commande des centrales. Analyse bibliographique et conclusions

Energy Technology Data Exchange (ETDEWEB)

Brunet, M

1994-03-01

The study covered in this paper is designed to review the current situation in terms of functional analysis, in order to find a functional analysis method for mechanical parts able to serve as a substrate for expressing operating safety constraints, time-related performance or any other tag of function description. This paper comprises three parts: The first is devoted to general notions of the formats used by the various functional analyses. It attempts to explain the three types of format: behavioural, structural and functional. It tackles the notions of trees and bottom-up and top-down approaches. It proposes examining the link between the expected functions of the systems and the hardware supporting these functions. It attempts to make a distinction between ``operators`` and ``operands`` enabling the notion of object to be linked to that of the three types of format seen above. It ends with a reminder of the distinction between semi-formal and formal. The second part analyses the current situation of functional analysis of the mechanical and control-instrumentation parts of power production plants, through a bibliographical search. The results of this second part are however disappointing. The purpose of the third part of the study is a prototype format built up from the considerations of the first two parts. This format meets our requirements better than those of the bibliographical analysis, but it could doubtless be improved: application of this format to RCV highlights its advantages, but also underlines the improvements needed. Given the deadlines of the Mexsyco project, the decision was taken to suspend development of this format for the time being and use a method currently being produced and based on use of the current functional breakdown (basic plant systems) and of a modular tree-structure representation of the control-instrumentation of a basic plant system. (author). 12 refs., 4 annexes.

The Ica-Atom using as access platform, dissemination and description of archival documents public institutions

Directory of Open Access Journals (Sweden)

Eliseu dos Santos Lima

2016-12-01

Full Text Available Introduction: Information technology has caused changes in various segments of society. In archival area its presence is remarkable, so much that lately has increased the quantity of institutions that make use of computerized systems, repositories and platforms that automate activities such as description, diffusion, and even provide access to archival documentary heritage. Objective: To discuss the functionality and usefulness of the platform International Archives Council - Access to Memory (ICA-AtoM in archival description of activities, dissemination and access to archival documentary heritage. Methodology: bibliographical research, drawn from the archival legislation, especially through research resulting from Master's dissertations, articles published in journals of the Science field of Information and manuals produced by members of the Group of CNPq-UFSM Research: Electronic Management of archival documents - Ged / A. Results: It was observed that the platform is used to describe both the permanent documents, and to provide access to information recorded in current and intermediate documents, in order to streamline access to documentary resources of public institutions. Conclusions: It is considered that the ICA-Atom besides serving the description, can provide an authentic environment for the secure storage and as a source of evidence of digital and digitized institutional documents, as well as to provide for preservation and long term access if It is connected to a RDC-Arq, like Archivematica, for example.

Geoscience Australia Publishes Sample Descriptions using W3C standards

Science.gov (United States)

Car, N. J.; Cox, S. J. D.; Bastrakova, I.; Wyborn, L. A.

2017-12-01

The recent revision of the W3C Semantic Sensor Network Ontology (SSN) has focused on three key concerns: Extending the scope of the ontology to include sampling and actuation as well as observation and sensing Modularizing the ontology into a simple core with few classes and properties and little formal axiomatization, supplemented by additional modules that formalize the semantics and extend the scope Alignments with several existing applications and upper ontologies These enhancements mean that SSN can now be used as the basis for publishing descriptions of geologic samples as Linked Data. Geoscience Australia maintains a database of about three million samples, collected over 50 years through projects from ocean core, terrestrial rock and hydrochemistry borehole projects, almost all of which are held in in the special-purpose GA samples repository. Access to descriptions of these samples as Linked Data has recently been enabled. The sample descriptions can be viewed in various machine-readable formalizations, including IGSN (XML & RDF), Dublin Core (XML & RDF) and SSN (RDF), as well as web landing-pages for people. Of particular importance is the support for encoding relationships between samples, and between samples and surveys, boreholes, and traverses which they are related to, as well as between samples processed for analytical purposes and their parents, siblings, and back to the original field samples. The SSN extension for Sample Relationships provides an extensible, semantically rich mechanism to capture any relationship necessary to explain the provenance of observation results obtained from samples. Sample citation is facilitated through the use of URI-based persistent identifiers which resolve to samples' landing pages. The sample system also allows PROV pingbacks to be received for samples when users of them record provenance for their actions.

Pediatric Residents and Interns in an Italian Hospital Perform Improved Bibliographic. A Review of: Gardois, P., Calabrese, R., Colombi, N., Lingua, C., Longo, F., Villanacci, M., Miniero, R., & Piga, A. (2011. Effectiveness of bibliographic searches performed by paediatric residents and interns assisted by librarian. A randomised controlled trial. Health Information and Libraries Journal, 28(4, 273-284. doi: 10.1111/j.1471-1842.2011.00957.x

Directory of Open Access Journals (Sweden)

Mathew Stone

2013-03-01

Full Text Available Objective – To establish whether the assistance of an experienced biomedical librarian delivers an improvement in the searching of bibliographic databases as performed by medical residents and interns.Design – Randomized controlled trial.Setting – The pediatrics department of a large Italian teaching hospital.Subjects – 18 pediatric residents and interns.Methods – 23 residents and interns from the pediatrics department of a large Italian teaching hospital were invited to participate inthis study, of which 18 agreed. Subjects were then randomized into two groups and asked to spend between 30 and 90 minutes searching bibliographic databases for evidence to answer a real-life clinical question which was randomly allocated to them. Each member ofthe intervention group was provided with an experienced biomedical librarian to provide assistance throughout the search session. The control group received no assistance. The outcome of the search was then measured using an assessment tool adapted for the purpose of this study from the Fresno test of competence in evidence based medicine. This adapted assessment tool rated the “global success” of the search and included criteria such as appropriate question formulation, number of PICO terms translated into search terms, use of Boolean logic, use of subject headings, use of filters, use of limits, and the percentage of citations retrieved that matched a gold standard set of citations found in a prior search by two librarians (who were not involved in assisting the subjects together with an expert clinician. Main Results – The intervention group scored a median average of 73.6 points out of a possible 100, compared with the control group which scored 50.4. The difference of 23.2 points in favour of the librarian assisted group was a statistically significant result (p value = 0.013 with a 95% confidence interval of between 4.8 and 33.2.Conclusion – This study presents credible evidence that

15 CFR 230.7 - Description of services and list of fees, incorporation by reference.

Science.gov (United States)

2010-01-01

... STANDARD REFERENCE MATERIALS STANDARD REFERENCE MATERIALS Description of Services and List of Fees § 230.7 Description of services and list of fees, incorporation by reference. (a) The text of NIST Special Publication... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Description of services and list of...

Standards and quality

CERN Document Server

El-Tawil, Anwar

2015-01-01

The book brings together a number of subjects of prime importance for any practicing engineer and, students of engineering. The book explains the concepts and functions of voluntary standards, mandatory technical regulations, conformity assessment (testing and measurement of products), certification, quality and quality management systems as well as other management systems such as environmental, social responsibility and food safety management systems.The book also gives a comprehensive description of the role of metrology systems that underpin conformity assessment. A description is given of typical national systems of standards, quality and metrology and how they relate directly or through regional structures to international systems. The book also covers the relation between standards and trade and explains the context and stipulations of the Technical Barriers to Trade Agreement of the World Trade Organization (WTO).

A descriptive study of pressure pain threshold at 2 standardized sites in people with acute or subacute neck pain.

Science.gov (United States)

Walton, David M; Macdermid, Joy C; Nielson, Warren; Teasell, Robert W; Nailer, Tamara; Maheu, Phillippe

2011-09-01

Cross-sectional convenience sample. To describe the distribution of scores for pressure pain threshold (PPT) at 2 standardized testing sites in people with neck pain of less than 90 days' duration: the angle of the upper trapezius and the belly of the tibialis anterior. A secondary objective was to identify important influences on PPT. PPT may be a valuable assessment and prognostic indicator for people with neck pain. However, to facilitate interpretation of scores, knowledge of means and variance for the target population, as well as factors that might influence scores, is needed. Participants were recruited from community-based physiotherapy clinics and underwent PPT testing using a digital algometer and standardized protocol. Descriptive statistics (mean, standard deviations, quartiles, skewness, and kurtosis) were calculated for the 2 sites. Simple bivariate tests of association were conducted to explore potential moderators. A positively skewed distribution was described for the 2 standardized sites. Significant moderators were sex (male higher than female), age (r = 0.22), and self-reported pain intensity (r = -0.24). Neither litigation status nor most symptomatic/least symptomatic side influenced PPT. This manuscript presents information regarding the expected scores for PPT testing in people with acute or subacute neck pain. Clinicians can compare the results of individual patients against these population values, and researchers can incorporate the significant confounders of age, sex, and self-reported pain intensity into future research designs.

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

CERN Document Server

Wiley, R A

1977-01-01

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

CSNI International Standard Problems (ISP). Brief descriptions (1975-1994)

International Nuclear Information System (INIS)

1994-07-01

Between 1975 and 1994 the NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored some forty International Standard Problems (ISPs) in the fields of in-vessel thermal-hydraulic behaviour, fuel behaviour under accident conditions, fission product release and transport, core/concrete interactions, hydrogen distribution and mixing, containment thermal-hydraulics. ISPs are comparative exercises in which predictions of different computer codes for a given physical problem are compared with each other or with the results of a carefully controlled experimental study. The main goal of ISP exercises is to increase confidence in the validity and accuracy of tools which are used in assessing the safety of nuclear installations. Moreover, they enable code users to gain experience and demonstrate their competence. ISPs are performed as 'open' or 'blind' problems. In an open Standard Problem the results of the experiment are available to the participants before performing the calculations, while in a blind Standard Problem the results are locked until the calculational results are made available for comparison. Experiments selected to support ISP exercises are exceptionally well documented; they provide the framework for several code validation matrices. This report briefly describes 36 ISPs and 3 containment analysis standard problems (CASP)

Echolalia in the language development of autistic individuals: a bibliographical review.

Science.gov (United States)

Saad, Andressa Gouveia de Faria; Goldfeld, Marcia

2009-01-01

echolalia is one of the most common symptoms among the language characteristics in Autism. to provide a detailed literature revision about the role of echolalia in the language development process of autistic individuals, and to discuss the use of this language feature in the speech-language clinical practice. The researches show classifications and analysis criterions of echolalia in a discursive context. A few of the analyzed studies are against the use of echolalia, pointing that it has no communicative function, and therefore should be discouraged. On the other hand, other studies indicate that echolalia has a communicative value and can be used as a communicative in speech-language intervention. this bibliographical review raises the issue about the importance of evaluating the conditions in which echolalia might occur before considering it as having a communicative value or not.

The family of standard hydrogen monitoring system computer software design description: Revision 2

International Nuclear Information System (INIS)

Bender, R.M.

1994-01-01

In March 1990, 23 waste tanks at the Hanford Nuclear Reservation were identified as having the potential for the buildup of gas to a flammable or explosive level. As a result of the potential for hydrogen gas buildup, a project was initiated to design a standard hydrogen monitoring system (SHMS) for use at any waste tank to analyze gas samples for hydrogen content. Since it was originally deployed three years ago, two variations of the original system have been developed: the SHMS-B and SHMS-C. All three are currently in operation at the tank farms and will be discussed in this document. To avoid confusion in this document, when a feature is common to all three of the SHMS variants, it will be referred to as ''The family of SHMS.'' When it is specific to only one or two, they will be identified. The purpose of this computer software design document is to provide the following: the computer software requirements specification that documents the essential requirements of the computer software and its external interfaces; the computer software design description; the computer software user documentation for using and maintaining the computer software and any dedicated hardware; and the requirements for computer software design verification and validation

Audio Description as a Pedagogical Tool

Directory of Open Access Journals (Sweden)

Georgina Kleege

2015-05-01

Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

Qualitative Research Literature: A Bibliographic Essay.

Science.gov (United States)

Horn, Jim

1998-01-01

Presents selected literature that exemplifies (in theory and in practice) four methodological frameworks that have found wide application in qualitative studies: symbolic interactionism, phenomenological description, constructivist hermeneutics, and critical studies. (Author/LRW)

Bibliographic Analysis of Nature Based on Twitter and Facebook Altmetrics Data.

Science.gov (United States)

Xia, Feng; Su, Xiaoyan; Wang, Wei; Zhang, Chenxin; Ning, Zhaolong; Lee, Ivan

2016-01-01

This paper presents a bibliographic analysis of Nature articles based on altmetrics. We assess the concern degree of social users on the Nature articles through the coverage analysis of Twitter and Facebook by publication year and discipline. The social media impact of a Nature article is examined by evaluating the mention rates on Twitter and on Facebook. Moreover, the correlation between tweets and citations is analyzed by publication year, discipline and Twitter user type to explore factors affecting the correlation. The results show that Twitter users have a higher concern degree on Nature articles than Facebook users, and Nature articles have higher and faster-growing impact on Twitter than on Facebook. The results also show that tweets and citations are somewhat related, and they mostly measure different types of impact. In addition, the correlation between tweets and citations highly depends on publication year, discipline and Twitter user type.

Standards update -- 1995

Energy Technology Data Exchange (ETDEWEB)

Mason, J.D.

1995-12-31

What a year this has been! Not since 1986, when SGML was being finished, has there been so much activity in the SGML world. In ISO, there are new standards being completed and old ones (some of which are not really all that old) being revised. As you`ll be hearing, there is lots of SGML activity in the applications world--particularly on the Internet--and that`s causing other kinds of standards activity. WG8 divides its work into five ``Rapporteur Groups`` (or ``RGs``) for DSSSL, Font Description and Interchange, SGML, SPDL, and Hypermedia Languages. Since interest is in DSSSL, SGML, and Hypermedia Languages, the author only mentions that the other groups have been active, too. The Fronts group has been doing amendments to its standards, ISO/IEC 9541 and ISO/IEC 10036. The Fronts groups has been active in providing support for ISO/IEC 10646, the massive character coding standard that has drawn a lot of attention in the SGML world. The SPDL group has at long last finished its standard, the Standard Page Description Language (ISO/IEC 10180) and is about to publish it. More detailed discussions are given for activity in SGML, DSSSL, and Hypermedia Languages.

HGVS Recommendations for the Description of Sequence Variants: 2016 Update.

Science.gov (United States)

den Dunnen, Johan T; Dalgleish, Raymond; Maglott, Donna R; Hart, Reece K; Greenblatt, Marc S; McGowan-Jordan, Jean; Roux, Anne-Francoise; Smith, Timothy; Antonarakis, Stylianos E; Taschner, Peter E M

2016-06-01

The consistent and unambiguous description of sequence variants is essential to report and exchange information on the analysis of a genome. In particular, DNA diagnostics critically depends on accurate and standardized description and sharing of the variants detected. The sequence variant nomenclature system proposed in 2000 by the Human Genome Variation Society has been widely adopted and has developed into an internationally accepted standard. The recommendations are currently commissioned through a Sequence Variant Description Working Group (SVD-WG) operating under the auspices of three international organizations: the Human Genome Variation Society (HGVS), the Human Variome Project (HVP), and the Human Genome Organization (HUGO). Requests for modifications and extensions go through the SVD-WG following a standard procedure including a community consultation step. Version numbers are assigned to the nomenclature system to allow users to specify the version used in their variant descriptions. Here, we present the current recommendations, HGVS version 15.11, and briefly summarize the changes that were made since the 2000 publication. Most focus has been on removing inconsistencies and tightening definitions allowing automatic data processing. An extensive version of the recommendations is available online, at http://www.HGVS.org/varnomen. © 2016 WILEY PERIODICALS, INC.

Conception and realisation of an automatic bibliographic metadata update handler based on patch extraction and merging for the CERN document repository environment.

CERN Document Server

Vesper, Martin; Ziolek, Wojciech

Scientific literature and its corresponding bibliographic metadata information is typically available through online digital repositories: • INSPIRE, the High Energy Physics (HEP) information system is the source of information about the whole HEP literature. • TheCERNDocumentServer(CDS) is the CERN Institutional Library containing all documents produced at CERN; • arXiv is a pre-print server hosting pre-print versions of several scientific fields. • SCOAP3 is an initiative to convert key journals in the HEP field to open access and comes with its own digital repository. Across these 4 entities, there is a big overlap in terms of content, and maintaining consistency between the corresponding bibliographic metadata is an open challenge. The proposed thesis tries to model and implement a possible solution to automate the propagation of updates in order to reduce the necessary manual data manipulation to a minimum.

A room with a viewpoint revisited: descriptive norms and hotel guests' towel reuse behavior.

Science.gov (United States)

Bohner, Gerd; Schlüter, Lena E

2014-01-01

Field experiments on descriptive norms as a means to increase hotel guests' towel reuse [1] were replicated and extended. In two hotels in Germany (Study 1: N = 724; Study 2: N = 204), descriptive norm messages suggesting that 75% of guests had reused their towels, or a standard message appealing to environmental concerns, were placed in guests' bathrooms. Descriptive norm messages varied in terms of proximity of the reference group ("hotel guests" vs. "guests in this room") and temporal proximity (currently vs. two years previous). Reuse of towels was unobtrusively recorded. Results showed that reuse rates were high overall and that both standard and descriptive norm messages increased reuse rates compared to a no-message baseline. However, descriptive norm messages were not more effective than the standard message, and effects of proximity were inconsistent across studies. Discussion addresses cultural and conceptual issues in comparing the present findings with previous ones.

[Study on standardization of cupping technique: elucidation on the establishment of the National Standard Standardized Manipulation of Acupuncture and Moxibustion, Part V, Cupping].

Science.gov (United States)

Gao, Shu-zhong; Liu, Bing

2010-02-01

From the aspects of basis, technique descriptions, core contents, problems and solutions, and standard thinking in standard setting process, this paper states experiences in the establishment of the national standard Standardized Manipulation of Acupuncture and Moxibustion, Part V, Cupping, focusing on methodologies used in cupping standard setting process, the method selection and operating instructions of cupping standardization, and the characteristics of standard TCM. In addition, this paper states the scope of application, and precautions for this cupping standardization. This paper also explaines tentative ideas on the research of standardized manipulation of acupuncture and moxibustion.

Definition and identification of journals as bibliographic and subject entities: Librarianship versus ISI Journal Citation Reports methods and their effect on citation measures

NARCIS (Netherlands)

Bensman, S.J.; Leydesdorff, L.

2009-01-01

This paper explores the ISI Journal Citation Reports (JCR) bibliographic and subject structures through Library of Congress (LC) and American research libraries cataloging and classification methodology. The 2006 Science Citation Index JCR Behavioral Sciences subject category journals are used as an

Methods of Creating a Personal Bibliography of a Composer’s Opus

Directory of Open Access Journals (Sweden)

Zoran Krstulović

2014-04-01

Full Text Available ABSTRACTThe article deals with different approaches to creating a personal bibliography of a composer’s opus. Methods of bibliographic descriptions of musical works in general bibliographies were examined with special emphasis on a thorough examination of methods of creating personal bibliographies of Slovenian composers from the beginning to the present. Special attention was given to the bibliographies of Emil Adamič, the first one dating in 1937 and the new one from the year 2004, and the bibliography of Vasilij Mirk. Three different approaches were identified. Bibliographic records are arranged according to the form of musical works, performers or types of music, furthermore, the records are arranged either alphabetically by the title or chronologically by the year of creation. Methods of creating a bibliography of a composer’s opus are presented for the first time resulting in guidelines for the organisation of bibliographic descriptions that will help bibliographers in their future endeavours.

Dynamic mapping of EDDL device descriptions to OPC UA

Science.gov (United States)

Atta Nsiah, Kofi; Schappacher, Manuel; Sikora, Axel

2017-07-01

OPC UA (Open Platform Communications Unified Architecture) is already a well-known concept used widely in the automation industry. In the area of factory automation, OPC UA models the underlying field devices such as sensors and actuators in an OPC UA server to allow connecting OPC UA clients to access device-specific information via a standardized information model. One of the requirements of the OPC UA server to represent field device data using its information model is to have advanced knowledge about the properties of the field devices in the form of device descriptions. The international standard IEC 61804 specifies EDDL (Electronic Device Description Language) as a generic language for describing the properties of field devices. In this paper, the authors describe a possibility to dynamically map and integrate field device descriptions based on EDDL into OPCUA.

School architectural standards and the expansion of Elementary School in the beginning of the twentieth century in Brazil

Directory of Open Access Journals (Sweden)

Fabricia Dias da Cunha de Moraes Fernandes

2016-10-01

Full Text Available This paper aims to describe the transformation that took place in the physical space of elementary schools in Brazil, within the initial period of expanding access to basic education, which occurred between the years 1930 to 1940. Through the historical - descriptive approach, it was sought to demonstrate that the school's architectural projects have materialized constituent aspects of current educational policies in the indicated periods. Based on a bibliographic research of historical framework, it was approached the emergence of new planning guidelines in state bodies and, the configuration of the Brazilian school architecture in accordance with the modernizing discourse of the period. Were sought the transformations of architectural models and the orientation change of planning bodies, which have used functionalist concepts from the architecture of modern movement for the construction of school buildings, following modular construction principles, prefabrication and despoliation of all ornamentation. Having as reference the modifications in planning guidelines and, how the school physical network has been configured, it was identified that the expansion of the physical network followed the parameter of public spending rationalization. This factor corroborated with the massive access, occasioning the adoption of standardized architectural solutions, impoverishment and precariousness of physical structure of Brazilian public schools.

A room with a viewpoint revisited: descriptive norms and hotel guests' towel reuse behavior.

Directory of Open Access Journals (Sweden)

Gerd Bohner

Full Text Available Field experiments on descriptive norms as a means to increase hotel guests' towel reuse [1] were replicated and extended. In two hotels in Germany (Study 1: N = 724; Study 2: N = 204, descriptive norm messages suggesting that 75% of guests had reused their towels, or a standard message appealing to environmental concerns, were placed in guests' bathrooms. Descriptive norm messages varied in terms of proximity of the reference group ("hotel guests" vs. "guests in this room" and temporal proximity (currently vs. two years previous. Reuse of towels was unobtrusively recorded. Results showed that reuse rates were high overall and that both standard and descriptive norm messages increased reuse rates compared to a no-message baseline. However, descriptive norm messages were not more effective than the standard message, and effects of proximity were inconsistent across studies. Discussion addresses cultural and conceptual issues in comparing the present findings with previous ones.

Standard-D hydrogen monitoring system, system design description

International Nuclear Information System (INIS)

Schneider, T.C.

1996-01-01

During most of the year, it is assumed that the vapor space in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty-five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gasses to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gasses from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. The Standard Hydrogen Monitoring System (SHMS) is designed to monitor and quantify the percent hydrogen concentration during these potential gas releases. This document describes the design of the Standard-D Hydrogen Monitoring System, (SHMS-D) and its components as it differs from the original SHMS

40 CFR 418.30 - Applicability; description of the urea subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the urea...) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Urea Subcategory § 418.30 Applicability; description of the urea subcategory. The provisions of this subpart are applicable to the...

The appropriateness of XML for diagnostic description

Energy Technology Data Exchange (ETDEWEB)

Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

2007-10-15

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

The appropriateness of XML for diagnostic description

International Nuclear Information System (INIS)

Neto, A.; Lister, J.B.; Fernandes, H.; Yonekawa, I.; Varandas, C.A.F.

2007-01-01

A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented

40 CFR 415.270 - Applicability; description of the borax production subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the borax... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Borax Production Subcategory § 415.270 Applicability; description of the borax production subcategory. The...

Archival standards, in archival open access software And offer appropriate software for internal archival centers

Directory of Open Access Journals (Sweden)

Abdolreza Izadi

2016-12-01

Full Text Available The purpose of this study is Study of Descriptive Metadata Standards in Archival open source software, to determine the most appropriate descriptive metadata standard (s and also Encoder Software support of these standards. The approach of present study is combination and library methods, Delphi and descriptive survey are used. Data gathering in library study is fiche, in the Delphi method is questionnaire and in descriptive survey is checklist. Statistical population contains 5 Archival open source software. The findings suggest that 5 metadata standards, consist of EAD, ISAD, EAC-CPF, ISAAR & ISDF, diagnosed appropriate by Delphi Panel members as the most appropriate descriptive metadata standards to use for archival software. Moreover, ICA-ATOM and Archivist toolkit in terms of support for standards that were suitable, diagnosed as the most appropriate archival software.

Is Intellectual Property Theft? BI's Hidden Ideology...And Two Reactions [and] In Defense of the Bibliographic Process [and] In Defense of Instruction Librarians.

Science.gov (United States)

Duff, Alistair S.; And Others

1995-01-01

Discusses the "hidden" ideology in traditional bibliographic instruction's treatment of intellectual property rights and copyright laws, and suggests that protection of these rights constitutes a form of stealing thoughts and ideas that should belong to the public. Reactions from two librarians who defend the current bibliographic…

Assessing the impact of bibliographical support on the quality of medical care in patients admitted to an internal medicine service: a prospective clinical, open, randomised two-arm parallel study.

Science.gov (United States)

Pastori, Matteo Mario; Sarti, Manuela; Pons, Marco; Barazzoni, Fabrizio

2014-10-01

To assess and quantify the impact of the literature in diagnostic decisions and treatment of patients admitted to an internal medicine service using the methodology of evidence-based medicine. From November 2012 to February 2013, patients who were hospitalised in the internal medicine service of Regional Hospital of Lugano (Switzerland) and generated questions on medical care were randomly assigned to two groups: an 'intervention group' (supported by the literature research) and a 'control group' (not supported by the literature research). The information obtained from the literature was submitted by email to all members of the medical team within 12 h after asking the question. Two hundred and one participants, from 866 patients hospitalised in the analysed period, divided into intervention (n=101) and control (n=100) groups, generated questions. In the intervention group, bibliographical research was possible for 98 participants. The medical team accepted the results and implemented the research for 90.8% of these participants (89/98). Statistical analyses were carried out on the intention-to-treat and on the per-protocol populations. Bibliographical research had a significant protective effect on transfer to an intensive care unit (relative risk (RR)=0.30; 95% CI 0.10 to 0.90; χ²=5.3, p=0.02) and hospital readmissions were also influenced by bibliographical research (RR=0.42; 95% CI 0.17 to 1.0; χ²=3.36, p=0.05) in the intention-to-treat population. Our results point out the importance of bibliographical support on the quality of medical care. In particular, they show its possible impact on clinical outcome. EOC Registry (registration number: 14-055).

Exploring metadata standards for competence descriptions in the business & management domain

OpenAIRE

Stergioulas, L

2011-01-01

This paper explores the development and use of competency metadata standards. As there has recently been a surge of a number of standards to address the challenge of representing competencies and there is a rising need to develop a common methodology, as well as methods and tools for developing, reusing, adapting, integrating such standards, this research is now becoming important and timely. We explore this within the context of the OpenScout project, which is building a federation of reposi...

Waste Management Systems Requirements and Descriptions (SRD)

International Nuclear Information System (INIS)

Conner, C.W.

1986-01-01

The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

Deep hierarchical attention network for video description

Science.gov (United States)

Li, Shuohao; Tang, Min; Zhang, Jun

2018-03-01

Pairing video to natural language description remains a challenge in computer vision and machine translation. Inspired by image description, which uses an encoder-decoder model for reducing visual scene into a single sentence, we propose a deep hierarchical attention network for video description. The proposed model uses convolutional neural network (CNN) and bidirectional LSTM network as encoders while a hierarchical attention network is used as the decoder. Compared to encoder-decoder models used in video description, the bidirectional LSTM network can capture the temporal structure among video frames. Moreover, the hierarchical attention network has an advantage over single-layer attention network on global context modeling. To make a fair comparison with other methods, we evaluate the proposed architecture with different types of CNN structures and decoders. Experimental results on the standard datasets show that our model has a more superior performance than the state-of-the-art techniques.

Interactive text mining with Pipeline Pilot: a bibliographic web-based tool for PubMed.

Science.gov (United States)

Vellay, S G P; Latimer, N E Miller; Paillard, G

2009-06-01

Text mining has become an integral part of all research in the medical field. Many text analysis software platforms support particular use cases and only those. We show an example of a bibliographic tool that can be used to support virtually any use case in an agile manner. Here we focus on a Pipeline Pilot web-based application that interactively analyzes and reports on PubMed search results. This will be of interest to any scientist to help identify the most relevant papers in a topical area more quickly and to evaluate the results of query refinement. Links with Entrez databases help both the biologist and the chemist alike. We illustrate this application with Leishmaniasis, a neglected tropical disease, as a case study.

MPEG DASH SRD : Spatial Relationship Description

NARCIS (Netherlands)

Niamut, O.A.; Thomas, E.D.R.; D'Acunto, L.; Concolato, C.; Denoual, F.; Yong Lim, S.

2016-01-01

This paper presents the Spatial Representation Description (SRD)feature of the second amendment of MPEG DASH standard part 1, 23009-1:2014 [1]. SRD is an approach for streaming only spatial sub-parts of a video to display devices, in combination with the form of adaptive multi-rate streaming that is

Frequency standards

CERN Document Server

Riehle, Fritz

2006-01-01

Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

The Slovenian bibliography

Directory of Open Access Journals (Sweden)

Lidija Wagner

2000-01-01

Full Text Available The Slovenian bibliography is our national bibliography. We want to show the criteria of the selection of the particular materials, which are included in the Slovenian bibliography. We described the bibliographic description and classification of the records with UDC and the descriptors. The printing and the CD-ROM issues of the Slovenian bibli¬ography are described. We compared UNESCO guidelines for the national bibliography on the field of the selection, bibliographic description and classification, arrangement of the records and the useful of the national bibliography.

STAMINA - Model description. Standard Model Instrumentation for Noise Assessments

NARCIS (Netherlands)

Schreurs EM; Jabben J; Verheijen ENG; CMM; mev

2010-01-01

Deze rapportage beschrijft het STAMINA-model, dat staat voor Standard Model Instrumentation for Noise Assessments en door het RIVM is ontwikkeld. Het instituut gebruikt dit standaardmodel om omgevingsgeluid in Nederland in kaart te brengen. Het model is gebaseerd op de Standaard Karteringsmethode

“FEATRON OR HISTORICAL SHAME” W. STRATEMANA – MEMO BOOK CYRILLIC PRINTING: HISTORICAL AND BIBLIOGRAPHIC ANALYSIS

Directory of Open Access Journals (Sweden)

В. Ю. Соколов

2015-09-01

history - in the dissemination and popularization of historical knowledge, as well as the impact on the formation of the Russian historical science. Identified the causes and factors that contributed to the popularity of historical writing in the first half of the XVIII century. Revealed the importance of translation and historiographical activity Gabriel (Gavriil Buzhinsky - as a translator and author of the preface to the publication of works by W. Stratemanna - to familiarize readers with the achievements of Russian Protestant historical thought and dissemination of information on world history. The basic idea of how historical works W. Stratemanna and G. Buzhinsky preface, as well as their influence on the development of historical thought in Russia during the study period. On the basis of analysis of the sources and historiographical material reveals reasons prohibition and destruction of publications W. Stratemanna in 1749 The article gives a brief description of publishing printing Alexander Nevsky Monastery in St. Petersburg. Analyzed rates of the test edition, its presence in the libraries and book collections of individuals. The author attempts to bibliographic analysis of the copies of the publication W. Stratemanna that are stored in the collections of rare books of the largest libraries of Kiev: characterized printing features of these printed works, the state of frames and prints the contents provenientsy, marginalia and so forth.

Bibliographic review of works accomplished about irradiated chicken, fish and fish products , spices and condiments

International Nuclear Information System (INIS)

Bernardes, B.; Dias Filho, M.

1983-07-01

Table of foods that can be irradiated and its respective nominal doses are shown. Bibliographic reviews of works performed about irradiated chicken, fish and fish products, spices and condiments are shown. The irradiation purpose in chicken were to increase the shelf-life and to eliminate the pathogenic microorganism in chicken stored below 10 0 C; in fish and fish products the purposes were to control the insect infestation in dry-fish during the storage and the sell exposure to reduce the macrobian charge in packed and non packed fish and in fish products. To reduce pathogenic microorganism in packing and unpacking fish; in spices and condiments to control the insect infestation, to reduce the microbial contamination. (L.M.J.)

Plutonium: resuspension of aerosols in nuclear installations: bibliographic survey; Le plutonium: mise en suspension d'aerosols dans les installations nucleaires: synthese bibliographique

Energy Technology Data Exchange (ETDEWEB)

Guetat, Ph; Monfort, M; Armand, P [CEA Bruyeres-le-Chatel, Dept. Analyse Surveillance Environnement, Service Radioanalyse Chimie Environnement, 91 (France); Alloul-Marmor, L [Societe APTUS, 78 - Versailles (France)

2006-07-01

This document presents an analysis and a bibliographical synthesis of the studies on resuspension factors for plutonium. It aims at helping the engineers of safety to specify the scenarios of accidents which relate to their activities and to bring elements justified for the definition of their term-source 'installation' in the safety reports of the installations. (authors)

Andrzej Soltan 1897-1959. Bio-bibliographic monograph

International Nuclear Information System (INIS)

Plucinska, H.

1991-01-01

Report contains the biography of professor Andrzej Soltan the first director of the Institute of Nuclear Research at Swierk, the description of his scientific and organizational activity as well as the bibliography of his papers. 73 refs

CSNI International standard problems (ISP): brief descriptions (1975-1997)

International Nuclear Information System (INIS)

1997-07-01

Over the last twenty years (1975-1999) the NEA Committee on the Safety of Nuclear Installations (CSNI) has sponsored more than forty International Standard Problems (ISPs) in the fields of in-vessel thermal-hydraulic behaviour, fuel behaviour under accident conditions, fission product release and transport, core/concrete interactions, hydrogen distribution and mixing, containment thermal-hydraulic, and iodine behaviour in the containment. ISPs are comparative exercises in which predictions of different computer codes for a given physical problem are compared with each other or with the results of a carefully controlled experimental study. The main goal of ISP exercises is to increase confidence in the validity and accuracy of analytical tools or testing procedures which are needed in warranting the safety of nuclear installations, and to demonstrate the competence of involved institutions. ISP exercises are performed as 'open' or 'blind' problems. The main characteristics of 41 ISPs completed between 1975 and 1999, and 3 containment analysis standard problems (CASPs) are briefly presented

Crew Transportation Operations Standards

Science.gov (United States)

Mango, Edward J.; Pearson, Don J. (Compiler)

2013-01-01

The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

Content of system design descriptions

International Nuclear Information System (INIS)

1998-10-01

A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

Technical description of the Swedish natural gas distribution system

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Ronny [KM Miljoeteknik AB (Sweden)

1997-06-01

This description of the Swedish distribution network has been produced to provide information for distribution companies, trade organisations, etc., who have an interest in getting a clear understanding of the technical design and standards, technical directives, etc., which have served as guidance in the development. The technical description covers the piping system from a measuring and regulating station (MR station) up to the consumer`s substation, however, only sections with a maximum operating pressure of 4 bar. By way of introduction, the description contains introductory information on supply channels, consumption patterns and the principal design of the high pressure network in Sweden 10 refs, 10 figs, 1 tab

Bibliographical study on the high-purity germanium radiation detectors used in gamma and X spectrometry

International Nuclear Information System (INIS)

Bornand, Bernard; Friant, Alain

1979-03-01

The germanium or silicon lithium-drifted detectors, Ge(Li) or Si(Li), and high-purity germanium detectors, HP Ge (impurity concentration approximately 10 10 cm -3 ), are the most commonly used at the present time as gamma and X-ray spectrometers. The HP Ge detectors for which room temperature storage is the main characteristic can be obtained with a large volume and a thin window, and are used as the Ge(Li) in γ ray spectrometry or the Si(Li) in X-ray spectrometry. This publication reviews issues from 1974 to 1978 on the state of the art and applications of the HP Ge semiconductor detectors. 101 bibliographical notices with French summaries are presented. An index for authors, documents and periodicals, and subjects is included [fr

Plutonium: resuspension of aerosols in nuclear installations: bibliographic survey; Le plutonium: mise en suspension d'aerosols dans les installations nucleaires: synthese bibliographique

Energy Technology Data Exchange (ETDEWEB)

Guetat, Ph.; Monfort, M.; Armand, P. [CEA Bruyeres-le-Chatel, Dept. Analyse Surveillance Environnement, Service Radioanalyse Chimie Environnement, 91 (France); Alloul-Marmor, L. [Societe APTUS, 78 - Versailles (France)

2006-07-01

This document presents an analysis and a bibliographical synthesis of the studies on resuspension factors for plutonium. It aims at helping the engineers of safety to specify the scenarios of accidents which relate to their activities and to bring elements justified for the definition of their term-source 'installation' in the safety reports of the installations. (authors)

CRAYFISH AND ITS CULTURE IN UKRAINE. THEMATIC REFERENCES LIST

Directory of Open Access Journals (Sweden)

I. Hrytsyniak

2014-09-01

Full Text Available Purpose. To compile a thematic references list on the problems of biology, physiology, pathology and crayfish breeding in Ukraine. Methodology. As the search base for the realization of the purpose was the scientific library stock of the Institute of Fisheries NAAS. The methods that have been preferred were both integrated and selective. Findings. We prepared a thematic reference list of the main scientific works, such as collections of scientific papers, proceedings of international scientific conferences, articles and candidate’s thesis abstracts on the biology of crustaceans and their cultivation in Ukraine, including the literature sources since 1958. The bibliography contains 37 publications of the Institute of Fisheries NAAS scientific library stock, in alphabetical order, and described according to DSTU GOST 7.1:2006 «System of standards on information, librarianship and publishing. Bibliographic entry. Bibliographic description. General requirements and rules». Practical value. The list may be helpful for experts, scientists, students, who are interested in problems of crayfish biology and culture.

Defrosting the digital library: bibliographic tools for the next generation web.

Science.gov (United States)

Hull, Duncan; Pettifer, Steve R; Kell, Douglas B

2008-10-01

Many scientists now manage the bulk of their bibliographic information electronically, thereby organizing their publications and citation material from digital libraries. However, a library has been described as "thought in cold storage," and unfortunately many digital libraries can be cold, impersonal, isolated, and inaccessible places. In this Review, we discuss the current chilly state of digital libraries for the computational biologist, including PubMed, IEEE Xplore, the ACM digital library, ISI Web of Knowledge, Scopus, Citeseer, arXiv, DBLP, and Google Scholar. We illustrate the current process of using these libraries with a typical workflow, and highlight problems with managing data and metadata using URIs. We then examine a range of new applications such as Zotero, Mendeley, Mekentosj Papers, MyNCBI, CiteULike, Connotea, and HubMed that exploit the Web to make these digital libraries more personal, sociable, integrated, and accessible places. We conclude with how these applications may begin to help achieve a digital defrost, and discuss some of the issues that will help or hinder this in terms of making libraries on the Web warmer places in the future, becoming resources that are considerably more useful to both humans and machines.

Defrosting the digital library: bibliographic tools for the next generation web.

Directory of Open Access Journals (Sweden)

Duncan Hull

2008-10-01

Full Text Available Many scientists now manage the bulk of their bibliographic information electronically, thereby organizing their publications and citation material from digital libraries. However, a library has been described as "thought in cold storage," and unfortunately many digital libraries can be cold, impersonal, isolated, and inaccessible places. In this Review, we discuss the current chilly state of digital libraries for the computational biologist, including PubMed, IEEE Xplore, the ACM digital library, ISI Web of Knowledge, Scopus, Citeseer, arXiv, DBLP, and Google Scholar. We illustrate the current process of using these libraries with a typical workflow, and highlight problems with managing data and metadata using URIs. We then examine a range of new applications such as Zotero, Mendeley, Mekentosj Papers, MyNCBI, CiteULike, Connotea, and HubMed that exploit the Web to make these digital libraries more personal, sociable, integrated, and accessible places. We conclude with how these applications may begin to help achieve a digital defrost, and discuss some of the issues that will help or hinder this in terms of making libraries on the Web warmer places in the future, becoming resources that are considerably more useful to both humans and machines.

Incites into Citation Linking using the OAI-PMH

CERN Multimedia

CERN. Geneva

2005-01-01

deposit process. This highly-distributed approach to citation linking utilises the OAI-PMH to transfer structured citation data between IRs and citation indexing services. OpenURL - a standard for contextual linking using bibliographic data - is now a NISO standard. As well as it's linking role, OpenURL is a useful standard for the transfer of bibliographic data for the purposes of...

Reduction of the greenhouse effect by geological mineral in-situ sequestration of CO2 in basic rocks: bibliographic synthesis and possibilities in France. Final report

International Nuclear Information System (INIS)

Marechal, J.C.; Lachassagne, P.

2004-01-01

The report constitutes a first bibliographic study defining the environments the most adapted to the geological mineral in-situ sequestration of CO 2 . For each environment the lithology and the rocks permeability and porosity are analyzed. Thus the possible rocks and deposits in France are presented. (A.L.B.)

Bibliographic citations pertinent to the Weldon Spring Site, St. Charles County, Missouri

International Nuclear Information System (INIS)

Owen, P.T.; Michelson, D.C.; Knox, N.P.

1985-08-01

This report is a compilation of 166 bibliographic references pertinent to the Weldon Spring Site (WSS), St. Charles County, Missouri. The WSS is a surplus US government facility which consists of the Weldon Spring Chemical Plant; two separate low-level radioactive waste storage properties, designated the ''raffinate pits'' and ''quarry'', and a number of potentially contaminated vicinity properties. The facility was used by the US Atomic Energy Commission from 1957 to 1966 to refine uranium. After several years the US Department of the Army acquired responsibility for the Weldon Spring Chemical Plant, performed some limited radiological decontamination, and then cancelled plans to construct a chemical process. Contamination of the facility and adjacent lands resulted from operation of the refining facility and the storage, transport, and disposal of process wastes on the property, as well as subsequent decontamination activities. All identified references to published technical documents that relate to the WSS were included in this report. In some cases citations from the reference section of existing documents were included in this report with no hardcopy to substantiate the existence of the document referenced

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

INTERVENTION IN SOCIAL SKILLS OF CHILDREN WITH AUTISTIC SPECTRUM DISORDER: A BIBLIOGRAPHICAL REVIEW

Directory of Open Access Journals (Sweden)

Inmaculada March-Miguez

2018-05-01

Full Text Available The prevalence rates of autistic spectrum disorder (ASD have increased markedly in recent years. ASD is increasingly present in schools and in society, so it is essential for us to know more about this disorder and the possibilities for intervention. The objective of this work is to carry out a bibliographic review of the articles published in recent years in relation to different intervention programs and techniques that have recently been used to work with children with ASD to train them in the difficulties that most define the disorder: social skills. The most important conclusions indicate that, despite the symptomatic diversity of children with ASD and their different characteristics which can lead to diverse results, there are many programs that improve social skills in these children and notable results are obtained by interventions that include families in the sessions and that are carried out with the use of new technologies, such as computers or robots.

RDA: Resource Description and Access: The new standard for metadata and resource discovery in the digital age

Directory of Open Access Journals (Sweden)

Carlo Bianchini

2015-01-01

Full Text Available RDA (Resource Description and Access is going to promote a great change. In fact, guidelines – rather than rules – are addressed to anyone wishes to describe and make accessible a cultural heritage collection or tout court a collection: librarians, archivists, curators and professionals in any other branch of knowledge. The work is organized in two parts: the former contains theoretical foundations of cataloguing (FRBR, ICP, semantic web and linked data, the latter a critical presentation of RDA guidelines. RDA aims to make possible creation of well-structured metadata for any kind of resources, reusable in any context and technological environment. RDA offers a “set of guidelines and instructions to create data for discovery of resources”. Guidelines stress four actions – to identify, to relate (from FRBR/FRAD user tasks and ICP, to represent and to discover – and a noun: resource. To identify entities of Group 1 and Group 2 of FRBR (Work, Expression, Manifestation, Item, Person, Family, Corporate Body; to relate entities of Group 1 and Group 2 of FRBR, by means of relationships. To enable users to represent and discover entities of Group 1 and Group 2 by means of their attributes and relationships. These last two actions are the reason of users’ searches, and users are the pinpoint of the process. RDA enables the discovery of recorded knowledge, that is any resource conveying information, any resources transmitting intellectual or artistic content by means of any kind of carrier and media. RDA is a content standard, not a display standard nor an encoding standard: it gives instructions to identify data and does not care about how display or encode data produced by guidelines. RDA requires an original approach, a metanoia, a deep change in the way we think about cataloguing. Innovations in RDA are many: it promotes interoperability between catalogs and other search tools, it adopts terminology and concepts of the Semantic Web, it

International Metadata Initiatives: Lessons in Bibliographic Control.

Science.gov (United States)

Caplan, Priscilla

This paper looks at a subset of metadata schemes, including the Text Encoding Initiative (TEI) header, the Encoded Archival Description (EAD), the Dublin Core Metadata Element Set (DCMES), and the Visual Resources Association (VRA) Core Categories for visual resources. It examines why they developed as they did, major point of difference from…

Descriptive markup languages and the development of digital humanities

Directory of Open Access Journals (Sweden)

Boris Bosančić

2012-11-01

Full Text Available The paper discusses the role of descriptive markup languages in the development of digital humanities, a new research discipline that is part of social sciences and humanities, which focuses on the use of computers in research. A chronological review of the development of digital humanities, and then descriptive markup languages is exposed, through several developmental stages. It is shown that the development of digital humanities since the mid-1980s and the appearance of SGML, markup language that was the foundation of TEI, a key standard for the encoding and exchange of humanities texts in the digital environment, is inseparable from the development of markup languages. Special attention is dedicated to the presentation of the Text Encoding Initiative – TEI development, a key organization that developed the titled standard, both from organizational and markup perspectives. By this time, TEI standard is published in five versions, and during 2000s SGML is replaced by XML markup language. Key words: markup languages, digital humanities, text encoding, TEI, SGML, XML

System 80+trademark Standard Design: CESSAR design certification

International Nuclear Information System (INIS)

1990-01-01

This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 8 provides a description of instrumentation and controls

Ethical and professional standards compliance among practicing ...

African Journals Online (AJOL)

This study investigated ethical and professional standards compliance among practicing librariansin university libraries in Benue State. The purpose of the study was todetermine the extent to which librarians in university libraries comply with ethics and professional standards in librarianship. The study adopted a descriptive ...

Expert system for quality control in bibliographic databases

International Nuclear Information System (INIS)

Todeschini, C.; Farrell, M.P.

1989-01-01

An Expert System is presented that can identify errors in the intellectual decisions made by indexers when categorizing documents into an a priori category scheme. The system requires the compilation of a Knowledge Base that incorporates in statistical form the decisions on the linking of indexing and categorization derived from a preceding period of the bibliographic database. New input entering the database is checked against the Knowledge Base, using the descriptor indexing assigned to each record, and the system computed a value for the match of each record with the particular category chosen by the indexer. This category match value is used as a criterion for identifying those documents that have been erroneously categorized. The system was tested on large sample of almost 26,000 documents, representing all the literature falling into ten of the subject categories of the Energy Data Base during the five year period 1980-1984. For valid comparisons among categories, the Knowledge Base must be constructed with an approximately equal number of unique descriptors for each subject category. The system identified those items with high probability of having been erroneously categorized. These items, constituting up to 5% of the sample, were evaluated manually by subject specialists for correct categorization and then compared with the results of the Expert System. Of those pieces of literature deemed by the system to be erroneously categorized, about 75% did indeed belong to a different category. This percentage, however, is dependent on the level at which the threshold on the category match value is set. With a lower threshold value, the percentage can be raised to 90%, but this is accompanied by a lowering of the absolute number of wrongly categorized records caught by the system. The Expert System can be considered as a first step to complete semiautomatic categorizing system

40 CFR 417.10 - Applicability; description of the soap manufacturing by batch kettle subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the soap... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Soap Manufacturing by Batch Kettle Subcategory § 417.10 Applicability; description of the soap...

Overview of North American Hydrogen Sensor Standards

Energy Technology Data Exchange (ETDEWEB)

O' Malley, Kathleen [SRA International, Inc., Colorado Springs, CO (United States); Lopez, Hugo [UL LLC, Chicago, IL (United States); Cairns, Julie [CSA Group, Cleveland, OH (United States); Wichert, Richard [Professional Engineering, Inc.. Citrus Heights, CA (United States); Rivkin, Carl [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burgess, Robert [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Buttner, William [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2015-08-11

An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensors in hydrogen infrastructure are presented.

Conversion and distribution of bibliographic information for further use on microcomputers with database software such as CDS/ISIS

International Nuclear Information System (INIS)

Nieuwenhuysen, P.; Besemer, H.

1990-05-01

This paper describes methods to work on microcomputers with data obtained from bibliographic and related databases distributed by online data banks, on CD-ROM or on tape. Also, we mention some user reactions to this technique. We list the different types of software needed to perform these services. Afterwards, we report about our development of software, to convert data so that they can be entered into UNESCO's program named CDS/ISIS (Version 2.3) for local database management on IBM microcomputers or compatibles; this software allows the preservation of the structure of the source data in records, fields, subfields and field occurrences. (author). 10 refs, 1 fig

Requirements of quality standards

International Nuclear Information System (INIS)

Mueller, J.

1977-01-01

The lecture traces the development of nuclear standards, codes, and Federal regulations on quality assurance (QA) for nuclear power plants and associated facilities. The technical evolution of the last twelve years, especially in the area of nuclear technology, led to different activities and regulatory initiatives, and the present result is: several nations have their own homemade standards. The lecture discusses the former and especially current activities in standard development, and gives a description of the requirements of QA-standards used in USA and Europe, especially Western Germany. Furthermore the lecture attempts to give a comparison and an evaluation of the international quality standards from the author's viewpoint. Finally the lecture presents an outlook for the future international implications of QA-standards. There is an urgent need within the nuclear industry for simplification and standardization of QA-standards. The relationship between the various standards, and the applicability of the standards need clarification and a better transparancy. To point out these problems is the purpose of the lecture. (orig.) [de

Standards for the preparation and writing of Psychology review articles

Directory of Open Access Journals (Sweden)

Luis Fernández-Ríos

2009-01-01

Full Text Available The synthesis of bibliographical resources addressing a topic is an interesting subject for research. It is included as part of literature reviews. The aim of this theoretical study is to establish a series of standards for planning, preparing and writing Psychology review articles. With this aim, the study suggests a set of guidelines for the structuring and justification of content for these types of articles: organisation of the article, background understanding of the topic, literature review, style and understanding of argumentative structure, theoretical and practical relevance of conclusions, the critical and interdisciplinary perspectives of the article, recommendations for future research and what the article can bring to the future advancement of the discipline. The work concludes on the relevance of the study undertaken and accepts the importance of undertaking the necessary reviews from the interdisciplinary perspective of building psychological understanding.

National standards of pharmaceutical education in the context of reforming legislation of higher education

Directory of Open Access Journals (Sweden)

І. M. Alieksieieva

2018-03-01

Full Text Available Socially significant steps of Ukraine in the issue of European integration are measures to reform the legislation on higher education in the context of the Bologna process, namely: the adoption of the National Qualifications Framework and the new edition of the Law of Ukraine "On Higher Education." The National Qualifications Framework (NQF, 2011 provides for "the introduction of European standards and principles to ensure the quality of education, taking into account the requirements of the labor market to the competence of specialists." According to formal characteristics, NQF is a matrix with static support elements – descriptors, which determine the vector of movement to a specific goal. The legal basis for the modernization of educational activities and standards of higher education was the new edition of the Law of Ukraine "On Higher Education" (2014. The purpose of the article is a scientific and analytical study of the process of forming national standards for higher education, in particular, the standards of pharmaceutical higher education. Materials and methods. The study was based on the analysis of normative and legal and other normative acts on higher education, the issues of standardization of higher education and the systematization of qualifications, as well as scientific developments on this issue. Methods of research – bibliographic, linguistic, contextual, substantive-legal, comparative-legal, generalization, description of results. Results. Updating the wording of the Law of Ukraine "On Higher Education," which is the basic normative legal act of higher legal action in higher education, the adjustment of its basic principles, concepts and approaches, objectively entailed the renewal of the entire regulatory and legal framework regulating the organization of higher education. Equally, this also affected the standards of higher education. This issue in the Act is reserved Section III: Standards of educational activity and

Office of Codes and Standards resource book. Section 1, Building energy codes and standards

Energy Technology Data Exchange (ETDEWEB)

Hattrup, M.P.

1995-01-01

The US Department of Energy`s (DOE`s) Office of Codes and Standards has developed this Resource Book to provide: A discussion of DOE involvement in building codes and standards; a current and accurate set of descriptions of residential, commercial, and Federal building codes and standards; information on State contacts, State code status, State building construction unit volume, and State needs; and a list of stakeholders in the building energy codes and standards arena. The Resource Book is considered an evolving document and will be updated occasionally. Users are requested to submit additional data (e.g., more current, widely accepted, and/or documented data) and suggested changes to the address listed below. Please provide sources for all data provided.

40 CFR 436.380 - Applicability; description of the graphite subcategory.

Science.gov (United States)

2010-07-01

... graphite subcategory. 436.380 Section 436.380 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS MINERAL MINING AND PROCESSING POINT SOURCE CATEGORY Graphite Subcategory § 436.380 Applicability; description of the graphite subcategory. The provisions of this subpart...

40 CFR 467.40 - Applicability; description of the forging subcategory.

Science.gov (United States)

2010-07-01

... forging subcategory. 467.40 Section 467.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ALUMINUM FORMING POINT SOURCE CATEGORY Forging Subcategory § 467.40 Applicability; description of the forging subcategory. This subpart applies to discharges of...

40 CFR 411.20 - Applicability; description of the leaching subcategory.

Science.gov (United States)

2010-07-01

... leaching subcategory. 411.20 Section 411.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY Leaching Subcategory § 411.20 Applicability; description of the leaching subcategory. The provisions of this subpart are...

40 CFR 418.20 - Applicability; description of the ammonia subcategory.

Science.gov (United States)

2010-07-01

... ammonia subcategory. 418.20 Section 418.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERTILIZER MANUFACTURING POINT SOURCE CATEGORY Ammonia Subcategory § 418.20 Applicability; description of the ammonia subcategory. The provisions of this subpart are...

A Room with a Viewpoint Revisited: Descriptive Norms and Hotel Guests' Towel Reuse Behavior

OpenAIRE

Bohner, Gerd; Schlüter, Lena E.

2014-01-01

Field experiments on descriptive norms as a means to increase hotel guests' towel reuse [1] were replicated and extended. In two hotels in Germany (Study 1: N = 724; Study 2: N = 204), descriptive norm messages suggesting that 75% of guests had reused their towels, or a standard message appealing to environmental concerns, were placed in guests' bathrooms. Descriptive norm messages varied in terms of proximity of the reference group ("hotel guests" vs. "guests in this room") and temporal prox...

An Integrated Systems Approach: A Description of an Automated Circulation Management System.

Science.gov (United States)

Seifert, Jan E.; And Others

These bidding specifications describe requirements for a turn-key automated circulation system for the University of Oklahoma Libraries. An integrated systems approach is planned, and requirements are presented for various subsystems: acquisitions, fund accounting, reserve room, and bibliographic and serials control. Also outlined are hardware…

A Standardized Diagnostic Interview for Hypoactive Sexual Desire Disorder in Women

DEFF Research Database (Denmark)

Bitzer, Johannes; Giraldi, Annamaria; Pfaus, Jim

2012-01-01

procedure that is patient centered and multidimensional. Aim.  Describing a patient-centered and multidimensional standard procedure to diagnose and manage HSDD on a primary care level. Methods.  Review of the literature. Semistructured interview and description of process. Result.  The interactive process...... with the patient follows several steps: initiation, narrative of the patient to understand the individual profile of the disorder, differentiating questions, descriptive diagnosis, exploration of conditioning biomedical, individual psychological, interpersonal, and sociocultural factors (including biomedical......, and Pfaus J. A standardized diagnostic interview for Hypoactive Sexual Desire Disorder in women: standard operating procedure (SOP part 2). J Sex Med **;**:**-**....

Advanced Transport Operating System (ATOPS) control display unit software description

Science.gov (United States)

Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

1992-01-01

The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

40 CFR 436.130 - Applicability; description of the borax subcategory.

Science.gov (United States)

2010-07-01

... borax subcategory. 436.130 Section 436.130 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS MINERAL MINING AND PROCESSING POINT SOURCE CATEGORY Borax Subcategory § 436.130 Applicability; description of the borax subcategory. The provisions of this subpart are...

Implementation of the ISO 14001: 2004 standard at the Florida Bebidas facilities in Coyol of Alajuela

International Nuclear Information System (INIS)

Picado Jimenez, Susana Melissa

2014-01-01

The partial implementation of the ISO 14001: 2004 standard is carried out at the company Florida Bebidas located in Coyol of Alajuela. A bibliographical study is initiated of the documentation that the Company has in others of its facilities on the subject, to comply with the stipulated in the environmental policy of the company. The implementation of the standard is planned by defining the priority environmental aspects according to the objectives, goals and environmental programs to fulfill the new period of the company. The responsibilities of those involved were defined. The documentation is elaborated, including the procedures, instructions for monitoring and measurement, records required by the standard, operational control, preparation and response to environmental emergencies. The verification of the management system is reviewed together with the legal evaluation. Environmental indicators are improved and significant environmental risks are identified to establish the pertinent measures and to reduce the risk index. The importance of implementing ISO 14001: 2004 to the control of procedures is determined, and the records created to follow up on each outstanding environmental aspect. The strict use of each of the established records is recommended to continue the process of standard implementing. (author) [es

Construction of a bibliographic information database and development of retrieval system for research reports in nuclear science and technology (II)

International Nuclear Information System (INIS)

Han, Duk Haeng; Kim, Tae Whan; Choi, Kwang; Yoo, An Na; Keum, Jong Yong; Kim, In Kwon

1996-05-01

The major goal of this project is to construct a bibliographic information database in nuclear engineering and to develop a prototype retrieval system. To give an easy access to microfiche research report, this project has accomplished the construction of microfiche research reports database and the development of retrieval system. The results of the project are as follows; 1. Microfiche research reports database was constructed by downloading from DOE Energy, NTIS, INIS. 2. The retrieval system was developed in host and web version using access point such as title, abstracts, keyword, report number. 6 tabs., 8 figs., 11 refs. (Author) .new

Construction of a bibliographic information database and development of retrieval system for research reports in nuclear science and technology (II)

Energy Technology Data Exchange (ETDEWEB)

Han, Duk Haeng; Kim, Tae Whan; Choi, Kwang; Yoo, An Na; Keum, Jong Yong; Kim, In Kwon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-05-01

The major goal of this project is to construct a bibliographic information database in nuclear engineering and to develop a prototype retrieval system. To give an easy access to microfiche research report, this project has accomplished the construction of microfiche research reports database and the development of retrieval system. The results of the project are as follows; 1. Microfiche research reports database was constructed by downloading from DOE Energy, NTIS, INIS. 2. The retrieval system was developed in host and web version using access point such as title, abstracts, keyword, report number. 6 tabs., 8 figs., 11 refs. (Author) .new.

Standard-B Hydrogen Monitoring System, system design description

International Nuclear Information System (INIS)

Schneider, T.C.

1995-01-01

During most of the year, it is assumed that the vapor in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gases to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gases from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. This document describes the design of the Standard-B Hydrogen Monitoring System, (SHMS) and its components as it differs from the original SHMS. The differences are derived from changes made to improve the system performance but not implemented in all the installed enclosures

40 CFR 421.200 - Applicability: Description of the secondary mercury subcategory.

Science.gov (United States)

2010-07-01

... secondary mercury subcategory. 421.200 Section 421.200 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Secondary Mercury Subcategory § 421.200 Applicability: Description of the secondary mercury...

Digitizing rocks: Standardizing the process of geologic description with workstations

International Nuclear Information System (INIS)

Saunders, M.R.; Shields, J.A.; Taylor, M.R.

1995-01-01

In the drive to squeeze the most value from every dollar spent on exploration and development, increasing use is being made of stored data through methods that rely on the completeness and accuracy of the database for their usefulness. Although many types of engineering data are available to the process, geologic data, especially those collected at a sufficiently detailed level to show reservoir heterogeneity, are often unavailable to later workers in any useful form. Traditionally, most wellsite geologic data are recorded on worksheets or notebooks, from which summary data are often transferred to computers. The only changes in recent years have been related to the process by which computer-drafted lithology logs have superseded hand-drawn logs; in some exceptions, some of the plotting data may be held in a simple database. These descriptions and analyses, gathered at considerable cost and capable of showing significant petrological detail, are not available to the whole field-development process. The authors set out to tackle these problems of limited usefulness and development a system that would deliver quality geologic data deep into the field of play in a form that was easy to select and integrated with existing models

Technique for description of nonrotational excited states in a semiphenomenological nuclear theory

International Nuclear Information System (INIS)

Krutov, V.A.

1985-01-01

A non-standard technique for microscopic description of excited nonrotational states is considered; it is suitable for inseparable force application. Besides, an additional binding operator, mixing quasi-particle excitations and E1-resonance states, is considered. Instead of the standard technique of state ''collectivization'' of the random phase approximation type it is used the so-called ''method of bound amplitudes''

A Description and Source Listing of Curriculum Materials in Agricultural Education. 1972-73.

Science.gov (United States)

American Vocational Association, Washington, DC. Agricultural Education Div.

Listed are 246 curriculum material items in ten categories: field crops, horticulture, forestry, animal science, soils, diseases and pests, agricultural engineering, agricultural economics, agricultural occupations, and professional. Most materials are annotated and all are classified according to the AGPEX filing system. Bibliographic and…

Elements of morphology: standard terminology for the external genitalia

NARCIS (Netherlands)

Hennekam, Raoul C. M.; Allanson, Judith E.; Biesecker, Leslie G.; Carey, John C.; Opitz, John M.; Vilain, Eric

2013-01-01

An international group of clinicians working in the field of dysmorphology has initiated the standardization of terms used to describe human morphology. The goals are to standardize these terms and reach consensus regarding their definitions. In this way, we will increase the utility of descriptions

40 CFR 427.90 - Applicability; description of the solvent recovery subcategory.

Science.gov (United States)

2010-07-01

... solvent recovery subcategory. 427.90 Section 427.90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Solvent Recovery Subcategory § 427.90 Applicability; description of the solvent recovery subcategory. The...

Towards reproducible descriptions of neuronal network models.

Directory of Open Access Journals (Sweden)

Eilen Nordlie

2009-08-01

Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

Raising standards in clinical research

DEFF Research Database (Denmark)

Ohmann, C.; Canham, S.; Demotes, J.

2017-01-01

The nature and the purpose of the ECRIN Data Centre Certification Programme are summarised, and a very brief description is given of the underlying standards (129 in total, divided into 19 separate lists). The certification activity performed so far is described. In a pilot phase 2 centres were c...

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

40 CFR 443.40 - Applicability; description of the linoleum and printed asphalt felt subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the linoleum and printed asphalt felt subcategory. 443.40 Section 443.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS EFFLUENT LIMITATIONS GUIDELINES FOR EXISTING SOURCES AND STANDARDS OF PERFORMANC...

Descriptive and inferential statistical methods used in burns research.

Science.gov (United States)

Al-Benna, Sammy; Al-Ajam, Yazan; Way, Benjamin; Steinstraesser, Lars

2010-05-01

Burns research articles utilise a variety of descriptive and inferential methods to present and analyse data. The aim of this study was to determine the descriptive methods (e.g. mean, median, SD, range, etc.) and survey the use of inferential methods (statistical tests) used in articles in the journal Burns. This study defined its population as all original articles published in the journal Burns in 2007. Letters to the editor, brief reports, reviews, and case reports were excluded. Study characteristics, use of descriptive statistics and the number and types of statistical methods employed were evaluated. Of the 51 articles analysed, 11(22%) were randomised controlled trials, 18(35%) were cohort studies, 11(22%) were case control studies and 11(22%) were case series. The study design and objectives were defined in all articles. All articles made use of continuous and descriptive data. Inferential statistics were used in 49(96%) articles. Data dispersion was calculated by standard deviation in 30(59%). Standard error of the mean was quoted in 19(37%). The statistical software product was named in 33(65%). Of the 49 articles that used inferential statistics, the tests were named in 47(96%). The 6 most common tests used (Student's t-test (53%), analysis of variance/co-variance (33%), chi(2) test (27%), Wilcoxon & Mann-Whitney tests (22%), Fisher's exact test (12%)) accounted for the majority (72%) of statistical methods employed. A specified significance level was named in 43(88%) and the exact significance levels were reported in 28(57%). Descriptive analysis and basic statistical techniques account for most of the statistical tests reported. This information should prove useful in deciding which tests should be emphasised in educating burn care professionals. These results highlight the need for burn care professionals to have a sound understanding of basic statistics, which is crucial in interpreting and reporting data. Advice should be sought from professionals

40 CFR 436.240 - Applicability; description of the diatomite subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the diatomite subcategory. 436.240 Section 436.240 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS MINERAL MINING AND PROCESSING POINT SOURCE CATEGORY Diatomite Subcategory § 436.240 Applicability;...

40 CFR 464.20 - Applicability; description of the copper casting subcategory.

Science.gov (United States)

2010-07-01

... copper casting subcategory. 464.20 Section 464.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Copper Casting Subcategory § 464.20 Applicability; description of the copper casting subcategory. The...

40 CFR 464.30 - Applicability; description of the ferrous casting subcategory.

Science.gov (United States)

2010-07-01

... ferrous casting subcategory. 464.30 Section 464.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Ferrous Casting Subcategory § 464.30 Applicability; description of the ferrous casting subcategory. The...

40 CFR 464.10 - Applicability; description of the aluminum casting subcategory.

Science.gov (United States)

2010-07-01

... aluminum casting subcategory. 464.10 Section 464.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Aluminum Casting Subcategory § 464.10 Applicability; description of the aluminum casting subcategory. The...

40 CFR 471.70 - Applicability; description of the uranium forming subcategory.

Science.gov (United States)

2010-07-01

... uranium forming subcategory. 471.70 Section 471.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS FORMING AND METAL POWDERS POINT SOURCE CATEGORY Uranium Forming Subcategory § 471.70 Applicability; description of the uranium forming...

Energy Information Data Base: DECOL manual (Descriptive Cataloging On-Line)

International Nuclear Information System (INIS)

1980-01-01

The DOE Technical Information Center (TIC) is responsible for creating bibliographic data bases that are used in the announcement and retrieval of publications of all types dealing with all phases of energy. This manual tells how data are initially entered into the TIC interactive processing system, and describes in detail the data elements and types of items included in the data bases. 21 tables

Persian Agricultural Journals and Standard: Degree of Compatibility of Persian Scientific Agricultural Journals with International Standard Organization (ISO Publishing standards

Directory of Open Access Journals (Sweden)

Abbas Gilvari

2011-10-01

Full Text Available Standard is a collection of recipes, guidelines or recommendations which use in production, creating or making of goods, products, documents or special resources. Extent of adaptation of Persian Agricultural scientific journals which are publishing in Iran with ISO publishing standards was evaluated in this research. The information items which were necessary to be presented in different sections of Agricultural scientific journals were examined. Items which were needed to be present in cover page, content, title page, running title, and endnote, abstract, first page of an article, references and its structure were among the information items. 47 Agricultural scientific journals were publishing until February 2009 consisted of the research population. Descriptive survey method is used. Results showed the adaption rate with ISO standards in research population was 53.47 percent. There was no private publisher which publishes agricultural scientific journals. The extent of adaptation with ISO standards was high in journal sections such as abstracts and keywords.

Nuclear powerplant standardization: light water reactors. Volume 2. Appendixes

International Nuclear Information System (INIS)

1981-06-01

This volume contains working papers written for OTA to assist in preparation of the report, NUCLEAR POWERPLANT STANDARDIZATION: LIGHT WATER REACTORS. Included in the appendixes are the following: the current state of standardization, an application of the principles of the Naval Reactors Program to commercial reactors; the NRC and standardization, impacts of nuclear powerplant standardization on public health and safety, descriptions of current control room designs and Duke Power's letter, Admiral Rickover's testimony, a history of standardization in the NRC, and details on the impact of standardization on public health and safety

The courts in Renaissance Italy

Directory of Open Access Journals (Sweden)

Beatrice Del Bo

2011-09-01

Full Text Available This review article offers a brief introduction to the issue of the courts in Renaissance Italy along with a selective description of bibliographic sources and electronic resources.

Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Bibliographic study of radiostrontium uptake capacity and processes in fish

International Nuclear Information System (INIS)

Pally, Monique; Foulquier, Luc

1979-09-01

This report is a synthesis of published work on the contamination of fish by radiostrontium, covering 143 publications and reports. The authors highlight the most important findings, since past activity levels in fish allow the effects of future discharges to be estimated. Both marine and freshwater environments are analyzed. The radiostrontium activity is evaluated in fish from zones both directly and not directly affected by liquid effluent discharges. Quantitative data is cited for the concentration factors and biological half lives determined from field measurements and laboratory experiments. Physiological phenomena discussed include contamination kinetics, radiostrontium distribution in fish organisms and the extent of transfer through food chains. The effects of biological factors (age, weight, species) and environmental factors (temperature, salinity, influence of stable elements) are examined. The radiostrontium uptake potential is higher in fresh water fish than in marine fish. In both cases, however, the water itself is the principal contamination source, and food is not of major importance; only the intake path varies. In both freshwater and seawater areas not directly affected by waste discharge, the 90 Sr content in fish was observed to rise until 1966, when it began to drop. Maximum values of 42000 pCi/kg live weigth were recorded in the skeletons of lacustrine fish. The mean concentration factors are 20 for marine fish and 300 for freshwater fish, while the biological half-lives are 138 days and 2 years, respectively. This bibliographic synthesis clearly demonstrates the need to determine baseline conditions prior to reactor divergence, and to make sufficient allowance for the local ecological characteristics of each site [fr

Bibliographic study of radiostrontium uptake capacity and processes in fish

International Nuclear Information System (INIS)

Pally, Monique; Foulquier, Luc

1979-09-01

This report is a synthesis of published work on the contamination of fish by radiostrontium, covering 143 publications and reports. The authors highlight the most important findings, since past activity levels in fish allow the effects of future discharges to be estimated. Both marine and freshwater environments are analyzed. The radiostrontium activity is evaluated in fish from zones both directly and not directly affected by liquid effluent discharges. Quantitative data is cited for the concentration factors and biological half lives determined from field measurements and laboratory experiments. Physiological phenomena discussed include contamination kinetics, radiostrontium distribution in fish organisms and the extent of transfer through food chains. The effects of biological factors (age, weight, species) and environmental factors (temperature, salinity, influence of stable elements) are examined. The radiostrontium uptake potential is higher in fresh water fish than in marine fish. In both cases, however, the water itself is the principal contamination source, and food is not of major importance; only the intake path varies. In both freshwater and seawater areas not directly affected by waste discharge, the 90 Sr content in fish was observed to rise until 1966, when it began to drop. Maximum values of 42000 pCi/kg live weight were recorded in the skeletons of lacustrine fish. The mean concentration factors are 20 for marine fish and 300 for freshwater fish, while the biological half-lives are 138 days and 2 years, respectively. This bibliographic synthesis clearly demonstrates the need to determine baseline conditions prior to reactor divergence, and to make sufficient allowance for the local ecological characteristics of each site [fr

40 CFR 464.40 - Applicability; description of the zinc casting subcategory.

Science.gov (United States)

2010-07-01

... casting subcategory. 464.40 Section 464.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL MOLDING AND CASTING POINT SOURCE CATEGORY Zinc Casting Subcategory § 464.40 Applicability; description of the zinc casting subcategory. The provisions of this...

40 CFR 405.120 - Applicability; description of the dry whey subcategory.

Science.gov (United States)

2010-07-01

... whey subcategory. 405.120 Section 405.120 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS DAIRY PRODUCTS PROCESSING POINT SOURCE CATEGORY Dry Whey Subcategory § 405.120 Applicability; description of the dry whey subcategory. The provisions of this subpart...

Bibliographic Data Towards the Semantic Web: A Review of Key Issues and Recent Experiences = Bibliyografik Verilerin İşlenmesinde Yenilikçi Yaklaşımlar: Semantik Web’e Doğru

Directory of Open Access Journals (Sweden)

Solodovnik, Iryna

2012-01-01

Full Text Available This article intends to review the underlying concepts and technologies of the Semantic Web and the potential they provide for metadata management covering bibliographic resources. To get closer to a semantic web data space, different libraries are adhering to the initiatives making their traditional Knowledge Organization Systems (KOS operational on the web through SKOS techniques, as well as releasing bibliographic data under open licenses (open bibliographic dataand publishing it with Linked Data (LD mechanisms. LD meaningful semantic connections createthe Web of Data, a global database representing the first practical step to the Semantic Web.Here interoperable data can be processed independently of application, platform or domain,providing rich retrieval results produced by powerful query languages. From a library perspective,a problem statement is a global promotion within the Library community of understandingand of adoption of Linked Open Data (LOD, of LODe-BD recommendations, as well as releasing bibliographic data as Linked Library Data (LLD. In this way, different bibliographic datasets could become full members of the Semantic Web making interoperable different knowledge datasets of heterogeneous web communities. / Son yıllarda, verilerini Web üzerinden paylaşan global Web topluluklarında, bibliyografik,bilimsel ve yönetsel verilerin yönetilmesi bakımından dijital bilgi sistemleri, yeni bilginin üretiminde merkezi bir rol oynamaya başlamıştır. Dijital materyallerin hacmi büyüdükçe ve kullanımları yaygınlaştıkça, dijital geçmiş ve geleceğimizin irtibatlandırılması önemli bir başarı mücadelesi gerektirmektedir. Geleneksel Bilgiyi organize eden sistemler, dijital çevrede veri yayınlanmasının yeni ortaya çıkan yöntemleri, verileri serbest erişime açma ve ilişkilendirerek “açık veri” haline getirme, farklı toplumların yenilikçi yaklaşımlarını destekleyen işbirliği �

Probability Theory Plus Noise: Descriptive Estimation and Inferential Judgment.

Science.gov (United States)

Costello, Fintan; Watts, Paul

2018-01-01

We describe a computational model of two central aspects of people's probabilistic reasoning: descriptive probability estimation and inferential probability judgment. This model assumes that people's reasoning follows standard frequentist probability theory, but it is subject to random noise. This random noise has a regressive effect in descriptive probability estimation, moving probability estimates away from normative probabilities and toward the center of the probability scale. This random noise has an anti-regressive effect in inferential judgement, however. These regressive and anti-regressive effects explain various reliable and systematic biases seen in people's descriptive probability estimation and inferential probability judgment. This model predicts that these contrary effects will tend to cancel out in tasks that involve both descriptive estimation and inferential judgement, leading to unbiased responses in those tasks. We test this model by applying it to one such task, described by Gallistel et al. ). Participants' median responses in this task were unbiased, agreeing with normative probability theory over the full range of responses. Our model captures the pattern of unbiased responses in this task, while simultaneously explaining systematic biases away from normatively correct probabilities seen in other tasks. Copyright © 2018 Cognitive Science Society, Inc.

Modern elementary particle physics explaining and extending the standard model

CERN Document Server

Kane, Gordon

2017-01-01

This book is written for students and scientists wanting to learn about the Standard Model of particle physics. Only an introductory course knowledge about quantum theory is needed. The text provides a pedagogical description of the theory, and incorporates the recent Higgs boson and top quark discoveries. With its clear and engaging style, this new edition retains its essential simplicity. Long and detailed calculations are replaced by simple approximate ones. It includes introductions to accelerators, colliders, and detectors, and several main experimental tests of the Standard Model are explained. Descriptions of some well-motivated extensions of the Standard Model prepare the reader for new developments. It emphasizes the concepts of gauge theories and Higgs physics, electroweak unification and symmetry breaking, and how force strengths vary with energy, providing a solid foundation for those working in the field, and for those who simply want to learn about the Standard Model.

Using Open Geographic Data to Generate Natural Language Descriptions for Hydrological Sensor Networks.

Science.gov (United States)

Molina, Martin; Sanchez-Soriano, Javier; Corcho, Oscar

2015-07-03

Providing descriptions of isolated sensors and sensor networks in natural language, understandable by the general public, is useful to help users find relevant sensors and analyze sensor data. In this paper, we discuss the feasibility of using geographic knowledge from public databases available on the Web (such as OpenStreetMap, Geonames, or DBpedia) to automatically construct such descriptions. We present a general method that uses such information to generate sensor descriptions in natural language. The results of the evaluation of our method in a hydrologic national sensor network showed that this approach is feasible and capable of generating adequate sensor descriptions with a lower development effort compared to other approaches. In the paper we also analyze certain problems that we found in public databases (e.g., heterogeneity, non-standard use of labels, or rigid search methods) and their impact in the generation of sensor descriptions.

Using Open Geographic Data to Generate Natural Language Descriptions for Hydrological Sensor Networks

Directory of Open Access Journals (Sweden)

Martin Molina

2015-07-01

Full Text Available Providing descriptions of isolated sensors and sensor networks in natural language, understandable by the general public, is useful to help users find relevant sensors and analyze sensor data. In this paper, we discuss the feasibility of using geographic knowledge from public databases available on the Web (such as OpenStreetMap, Geonames, or DBpedia to automatically construct such descriptions. We present a general method that uses such information to generate sensor descriptions in natural language. The results of the evaluation of our method in a hydrologic national sensor network showed that this approach is feasible and capable of generating adequate sensor descriptions with a lower development effort compared to other approaches. In the paper we also analyze certain problems that we found in public databases (e.g., heterogeneity, non-standard use of labels, or rigid search methods and their impact in the generation of sensor descriptions.

COMPUTER INTEGRATED MANUFACTURING: OVERVIEW OF MODERN STANDARDS

Directory of Open Access Journals (Sweden)

A. Рupena

2016-09-01

Full Text Available The article deals with modern international standards ISA-95 and ISA-88 on the development of computer inegreted manufacturing. It is shown scope of standards in the context of a hierarchical model of the enterprise. Article is built in such a way to describe the essence of the standards in the light of the basic descriptive models: product definition, resources, schedules and actual performance of industrial activity. Description of the product definition is given by hierarchical presentation of products at various levels of management. Much attention is given to describe this type of resources like equipment, which is logical chain to all these standards. For example, the standard batch process control shows the relationship between the definition of product and equipment on which it is made. The article shows the hierarchy of planning ERP-MES / MOM-SCADA (in terms of standard ISA-95, which traces the decomposition of common production plans of enterprises for specific works at APCS. We consider the appointment of the actual performance of production at MES / MOM considering KPI. Generalized picture of operational activity on a level MES / MOM is shown via general circuit diagrams of the relationship of activities and information flows between the functions. The article is finished by a substantiation of necessity of distribution, approval and development of standards ISA-88 and ISA-95 in Ukraine. The article is an overview and can be useful to specialists in computer-integrated systems control and management of industrial enterprises, system integrators and suppliers.

40 CFR 440.40 - Applicability; description of the mercury ore subcategory.

Science.gov (United States)

2010-07-01

... mercury ore subcategory. 440.40 Section 440.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Mercury Ore Subcategory § 440.40 Applicability; description of the mercury ore subcategory. The provisions of subpart D...

Elements of Morphology: Standard Terminology for the Nose and Philtrum

NARCIS (Netherlands)

Hennekam, Raoul C. M.; Cormier-Daire, Valerie; Hall, Judith G.; Méhes, Károly; Patton, Michael; Stevenson, Roger E.

2009-01-01

An international group of clinicians working in the field of dysmorphology has initiated the standardization of terms used to describe human morphology. The goals are to standardize these terms and reach consensus regarding their definitions. In this way, we will increase the utility of descriptions

The Quantum Description of BF Model in Superspace

Directory of Open Access Journals (Sweden)

Manoj Kumar Dwivedi

2018-01-01

Full Text Available We consider the BRST symmetric four-dimensional BF theory, a topological theory, containing antisymmetric tensor fields in Landau gauge and extend the BRST symmetry by introducing a shift symmetry to it. Within this formulation, the antighost fields corresponding to shift symmetry coincide with antifields of standard field/antifield formulation. Furthermore, we provide a superspace description for the BF model possessing extended BRST and extended anti-BRST transformations.

Development of an Integrated, Computer-Based Bibliographical Data System for a Large University Library. Annual Report to the National Science Foundation from the University of Chicago Library, 1966/67.

Science.gov (United States)

Fussler, Herman; Payne, Charles T.

Part I is a discussion of the following project tasks: A) development of an on-line, real-time bibliographic data processing system; B) implementation in library operations; C) character sets; D) Project MARC; E) circulation; and F) processing operation studies. Part II is a brief discussion of efforts to work out cooperative library systems…

The standard for portfolio management

CERN Document Server

2017-01-01

The Standard for Portfolio Management – Fourth Edition has been updated to best reflect the current state of portfolio management. It describe the principles that drive accepted good portfolio management practices in today’s organizations. It also expands the description of portfolio management to reflect its relation to organizational project management and the organization.

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

Science.gov (United States)

2010-07-01

... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Galvanized Basis Material Subcategory § 465.20 Applicability; description of the galvanized basis material...

Standard guide for reflected–light photomicrography

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This guide outlines various methods which may be followed in the photography of metals and materials with the reflected-light microscope. Methods are included for preparation of prints and transparencies in black-and-white and in color, using both direct rapid and wet processes. 1.2 Guidelines are suggested to yield photomicrographs of typical subjects and, to the extent possible, of atypical subjects as well. Information is included concerning techniques for the enhanced display of specific material features. Descriptive material is provided where necessary to clarify procedures. References are cited where detailed descriptions may be helpful. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Specific precautionary statements are given in X1.7. 1.4 The sections appear ...

Gating-ML: XML-based gating descriptions in flow cytometry.

Science.gov (United States)

Spidlen, Josef; Leif, Robert C; Moore, Wayne; Roederer, Mario; Brinkman, Ryan R

2008-12-01

The lack of software interoperability with respect to gating due to lack of a standardized mechanism for data exchange has traditionally been a bottleneck, preventing reproducibility of flow cytometry (FCM) data analysis and the usage of multiple analytical tools. To facilitate interoperability among FCM data analysis tools, members of the International Society for the Advancement of Cytometry (ISAC) Data Standards Task Force (DSTF) have developed an XML-based mechanism to formally describe gates (Gating-ML). Gating-ML, an open specification for encoding gating, data transformations and compensation, has been adopted by the ISAC DSTF as a Candidate Recommendation. Gating-ML can facilitate exchange of gating descriptions the same way that FCS facilitated for exchange of raw FCM data. Its adoption will open new collaborative opportunities as well as possibilities for advanced analyses and methods development. The ISAC DSTF is satisfied that the standard addresses the requirements for a gating exchange standard.

Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

Science.gov (United States)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

Statistics as Unbiased Estimators: Exploring the Teaching of Standard Deviation

Science.gov (United States)

Wasserman, Nicholas H.; Casey, Stephanie; Champion, Joe; Huey, Maryann

2017-01-01

This manuscript presents findings from a study about the knowledge for and planned teaching of standard deviation. We investigate how understanding variance as an unbiased (inferential) estimator--not just a descriptive statistic for the variation (spread) in data--is related to teachers' instruction regarding standard deviation, particularly…

40 CFR 421.140 - Applicability: Description of the primary antimony subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability: Description of the primary antimony subcategory. 421.140 Section 421.140 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS NONFERROUS METALS MANUFACTURING POINT SOURCE CATEGORY Primary Antimony Subcategory § 421.140...

Mixing journal, article, and author citations, and other pitfalls in the bibliographic impact factor

Directory of Open Access Journals (Sweden)

Porta Miquel

2003-01-01

Full Text Available News of the death of biomedical journals seem premature. Revamped traditional scientific journals remain highly valued sources and vehicles of information, critical debate, and knowledge. Some analyses seem to place a disproportionate emphasis on technological and formal issues, as compared to the importance ascribed to matters of power. Not all journals must necessarily have a large circulation. There are many examples of efficient, high-quality journals with a great impact on relatively small audiences for whom the journal is thought-provoking, useful, and pleasant to read. How can we achieve a better understanding of an article?s spectrum of impacts? A certain mixing of three distinct entities (journals, articles, and authors has often pervaded judgments. Data used by the Institute for Scientific Information present weaknesses in their accuracy. The two-year limit for citations to count towards the bibliographic impact factor favors "fast-moving", "basic" biomedical disciplines and is less appropriate for public health studies. Increasing attention is given to the specific number of citations received by each individual article. It is possible to make progress towards more valid, accurate, fair, and relevant assessments.

Theoretical and bibliographic synthesis on micro-heat pipes; Synthese theorique et bibliographique sur les microcaloducs

Energy Technology Data Exchange (ETDEWEB)

Sartre, V; Lallemand, M [Institut National des Sciences Appliquees (INSA), 69 - Villeurbanne (France)

1997-12-31

The technology, dimensioning and performances of heat pipes are well known since several years. Micro-heat pipes occurred more recently with the miniaturization of systems to be cooled and the increase of surface heat fluxes to be dissipated. Publications concerning this topic are not much older than the 90`s. Using these papers, a bibliographic synthesis on micro-heat pipe performances, functioning and dimensioning is presented. Experimental studies demonstrate the efficiency of such systems but also their high sensitivity with respect to the capillary limit which leads to a progressive drying of the evaporator and a reduction of its thermal conductance. Theoretical studies are based on the same equations than heat pipes. More or less complex models have been proposed in the literature and a relatively simple model is presented in this paper. These studies have permitted to show the great influence of some parameters on micro-heat pipes functioning like: the pipe geometry, the fluid-wall contact angle, the level of pipes filling, and the bonding zone of the liquid film on the wall. (J.S.) 15 refs.

Theoretical and bibliographic synthesis on micro-heat pipes; Synthese theorique et bibliographique sur les microcaloducs

Energy Technology Data Exchange (ETDEWEB)

Sartre, V.; Lallemand, M. [Institut National des Sciences Appliquees (INSA), 69 - Villeurbanne (France)

1996-12-31

The technology, dimensioning and performances of heat pipes are well known since several years. Micro-heat pipes occurred more recently with the miniaturization of systems to be cooled and the increase of surface heat fluxes to be dissipated. Publications concerning this topic are not much older than the 90`s. Using these papers, a bibliographic synthesis on micro-heat pipe performances, functioning and dimensioning is presented. Experimental studies demonstrate the efficiency of such systems but also their high sensitivity with respect to the capillary limit which leads to a progressive drying of the evaporator and a reduction of its thermal conductance. Theoretical studies are based on the same equations than heat pipes. More or less complex models have been proposed in the literature and a relatively simple model is presented in this paper. These studies have permitted to show the great influence of some parameters on micro-heat pipes functioning like: the pipe geometry, the fluid-wall contact angle, the level of pipes filling, and the bonding zone of the liquid film on the wall. (J.S.) 15 refs.

EMPReSS: European mouse phenotyping resource for standardized screens.

Science.gov (United States)

Green, Eain C J; Gkoutos, Georgios V; Lad, Heena V; Blake, Andrew; Weekes, Joseph; Hancock, John M

2005-06-15

Standardized phenotyping protocols are essential for the characterization of phenotypes so that results are comparable between different laboratories and phenotypic data can be related to ontological descriptions in an automated manner. We describe a web-based resource for the visualization, searching and downloading of standard operating procedures and other documents, the European Mouse Phenotyping Resource for Standardized Screens-EMPReSS. Direct access: http://www.empress.har.mrc.ac.uk e.green@har.mrc.ac.uk.

On the nuclear double beta decay: microscopic description

International Nuclear Information System (INIS)

Civitarese, Osvaldo

1989-01-01

This paper is devoted to the discussion of some problems related with microscopic descriptions of the nuclear double beta decay. It has been organized in the following order: 1) Review of the experimental situation; 2) Brief discussion of the theoretical aspects related to the current algebra, weak interaction, neutrino and majoron's status and 3) Elements of the standard nuclear theory involved in the calculation of transition densities for the nuclear double beta decay. (Author) [es

Manuel UNIMARC format bibliographique

CERN Document Server

2007-01-01

This manual is the French translation of the second edition of UNIMARC Manual: bibliographic format published in English in 1994 and completed by 5 updates published from 1996 to 2005. This 5th French edition is composite. It reproduces identically a part of the 4th edition published in 2002 and, for the fields of the format modified in the Update 5, it offers a new more structured presentation. This is a handbook dedicated to French-speaking users of the UNIMARC format for bibliographic descriptions.

40 CFR 440.90 - Applicability; description of the antimony ore subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the antimony ore subcategory. 440.90 Section 440.90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.90 Applicability;...

40 CFR 406.50 - Applicability; description of the normal rice milling subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the normal rice milling subcategory. 406.50 Section 406.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Normal Rice...

System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

Energy Technology Data Exchange (ETDEWEB)

1990-12-21

This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

[Standardization of terminology in laboratory medicine I].

Science.gov (United States)

Yoon, Soo Young; Yoon, Jong Hyun; Min, Won Ki; Lim, Hwan Sub; Song, Junghan; Chae, Seok Lae; Lee, Chang Kyu; Kwon, Jung Ah; Lee, Kap No

2007-04-01

Standardization of medical terminology is essential for data transmission between health-care institutions or clinical laboratories and for maximizing the benefits of information technology. Purpose of our study was to standardize the medical terms used in the clinical laboratory, such as test names, units, terms used in result descriptions, etc. During the first year of the study, we developed a standard database of concept names for laboratory terms, which covered the terms used in government health care centers, their branch offices, and primary health care units. Laboratory terms were collected from the electronic data interchange (EDI) codes from National Health Insurance Corporation (NHIC), Logical Observation Identifier Names and Codes (LOINC) database, community health centers and their branch offices, and clinical laboratories of representative university medical centers. For standard expression, we referred to the English-Korean/ Korean-English medical dictionary of Korean Medical Association and the rules for foreign language translation. Programs for mapping between LOINC DB and EDI code and for translating English to Korean were developed. A Korean standard laboratory terminology database containing six axial concept names such as components, property, time aspect, system (specimen), scale type, and method type was established for 7,508 test observations. Short names and a mapping table for EDI codes and Unified Medical Language System (UMLS) were added. Synonym tables for concept names, words used in the database, and six axial terms were prepared to make it easier to find the standard terminology with common terms used in the field of laboratory medicine. Here we report for the first time a Korean standard laboratory terminology database for test names, result description terms, result units covering most laboratory tests in primary healthcare centers.

Standards for reporting qualitative research: a synthesis of recommendations.

Science.gov (United States)

O'Brien, Bridget C; Harris, Ilene B; Beckman, Thomas J; Reed, Darcy A; Cook, David A

2014-09-01

Standards for reporting exist for many types of quantitative research, but currently none exist for the broad spectrum of qualitative research. The purpose of the present study was to formulate and define standards for reporting qualitative research while preserving the requisite flexibility to accommodate various paradigms, approaches, and methods. The authors identified guidelines, reporting standards, and critical appraisal criteria for qualitative research by searching PubMed, Web of Science, and Google through July 2013; reviewing the reference lists of retrieved sources; and contacting experts. Specifically, two authors reviewed a sample of sources to generate an initial set of items that were potentially important in reporting qualitative research. Through an iterative process of reviewing sources, modifying the set of items, and coding all sources for items, the authors prepared a near-final list of items and descriptions and sent this list to five external reviewers for feedback. The final items and descriptions included in the reporting standards reflect this feedback. The Standards for Reporting Qualitative Research (SRQR) consists of 21 items. The authors define and explain key elements of each item and provide examples from recently published articles to illustrate ways in which the standards can be met. The SRQR aims to improve the transparency of all aspects of qualitative research by providing clear standards for reporting qualitative research. These standards will assist authors during manuscript preparation, editors and reviewers in evaluating a manuscript for potential publication, and readers when critically appraising, applying, and synthesizing study findings.

The IAEA safety standards for radiation, waste and nuclear safety

International Nuclear Information System (INIS)

Gonzalez, Abel J.

1997-01-01

This paper presents a brief description of the standards for radiation, waste and nuclear safety established by the International Atomic Energy Agency (IAEA). It provides a historical overview of their development and also summarizes the standards' current preparation and review process. The final paragraphs offer an outlook on future developments. (author)

The need for data standards in zoomorphology.

Science.gov (United States)

Vogt, Lars; Nickel, Michael; Jenner, Ronald A; Deans, Andrew R

2013-07-01

eScience is a new approach to research that focuses on data mining and exploration rather than data generation or simulation. This new approach is arguably a driving force for scientific progress and requires data to be openly available, easily accessible via the Internet, and compatible with each other. eScience relies on modern standards for the reporting and documentation of data and metadata. Here, we suggest necessary components (i.e., content, concept, nomenclature, format) of such standards in the context of zoomorphology. We document the need for using data repositories to prevent data loss and how publication practice is currently changing, with the emergence of dynamic publications and the publication of digital datasets. Subsequently, we demonstrate that in zoomorphology the scientific record is still limited to published literature and that zoomorphological data are usually not accessible through data repositories. The underlying problem is that zoomorphology lacks the standards for data and metadata. As a consequence, zoomorphology cannot participate in eScience. We argue that the standardization of morphological data requires i) a standardized framework for terminologies for anatomy and ii) a formalized method of description that allows computer-parsable morphological data to be communicable, compatible, and comparable. The role of controlled vocabularies (e.g., ontologies) for developing respective terminologies and methods of description is discussed, especially in the context of data annotation and semantic enhancement of publications. Finally, we introduce the International Consortium for Zoomorphology Standards, a working group that is open to everyone and whose aim is to stimulate and synthesize dialog about standards. It is the Consortium's ultimate goal to assist the zoomorphology community in developing modern data and metadata standards, including anatomy ontologies, thereby facilitating the participation of zoomorphology in e

Analysis of and reflection on bachelor thesis in nursing students: A descriptive study in Spain.

Science.gov (United States)

Roca, Judith; Gros, Silvia; Canet, Olga

2018-06-11

The bachelor thesis, a final year subject to obtain a nursing degree, presents an ideal opportunity for the development and assessment of professional competencies. Thus, it is necessary to specify that the structure of the bachelor thesis works as an element of review and reflection from both a pedagogical and professional perspective. To analyse the main elements of the bachelor thesis in the nursing degree 2015-16 in Spain. A transversal descriptive study was conducted using a quantitative documentary analysis via study guides or grade reports. The variables were the main academic elements of the bachelor thesis subject (credits, competencies, learning outcomes, contents, methodologies, training activities and assessment). A probabilistic sample of 66 institutions was studied using descriptive statistics with statistical measures of central tendency and measures of variability. The results showed a maximum range of 12 and a minimum of 6 European Credit Transfer and Accumulation System. The definition and number of competencies to be developed varied and the learning outcomes were formulated in only 40.9% of the guides consulted. The most widely used teaching methodologies and training activities were academic supervision (87.9%) and autonomous work (80.3%). Regarding types of work, basic investigation (34.8%), care plans (33.3%) and literature review (30,3%) ranked highest. No specific descriptors could be linked to the contents. Finally, two main assessment tools were found: process and product. The rubric is presented as a main element of the assessment. The bachelor thesis is conceived as autonomous, personal and original academic work. But no homogeneity was observed in the key development elements such as competencies, teaching strategies, or type of bachelor thesis. Therefore, the findings from the analysis and the bibliographic review are presented as recommendations as regards the outcome, structure and/or teaching elements linked to the bachelor thesis

Relational description of the measurement process in quantum field theory

International Nuclear Information System (INIS)

Gambini, Rodolfo; Porto, Rafael A.

2002-01-01

We have recently introduced a realistic, covariant, interpretation for the reduction process in relativistic quantum mechanics. The basic problem for a covariant description is the dependence of the states on the frame within which collapse takes place. A suitable use of the causal structure of the devices involved in the measurement process allowed us to introduce a covariant notion for the collapse of quantum states. However, a fully consistent description in the relativistic domain requires the extension of the interpretation to quantum fields. The extension is far from straightforward. Besides the obvious difficulty of dealing with the infinite degrees of freedom of the field theory, one has to analyse the restrictions imposed by causality concerning the allowed operations in a measurement process. In this paper we address these issues. We shall show that, in the case of partial causally connected measurements, our description allows us to include a wider class of causal operations than the one resulting from the standard way of computing conditional probabilities. This alternative description could be experimentally tested. A verification of this proposal would give stronger support to the realistic interpretations of the states in quantum mechanics. (author)

National Uranium Resource Evaluation. Bibliographic index of Grand Junction office uranium reports

Energy Technology Data Exchange (ETDEWEB)

Johnson, J.B.

1981-05-01

In October 1978, Mesa College entered into subcontract with Bendix Field Engineering Corporation (BFEC) to prepare a bibliographic index of the uranium raw materials reports issued by the Grand Junction Office of the US Department of Energy (DOE). Bendix, prime contractor to the Grand Junction Office, operates the Technical Library at the DOE facility. Since the early 1950s, approximately 2700 reports have been issued by the Grand Junction Office. These reports were the results of uranium investigations conducted by federal agencies and their subcontractors. The majority of the reports cover geology, mineralogy, and metallurgy of uranium and/or thorium. No single, complete list of these reports existed. The purpose of this subcontract was to compile a comprehensive index to these reports. The Mesa College geology faculty worked with the BFEC and DOE staffs to develop the format for the index. Undergraduate geology students from Mesa compiled a master record sheet for each report. All reports issued up to January 1, 1979 were included in the bibliography. The bibliography is in preliminary, unedited form. It is being open-filed at this time, on microfiche, to make the information available to the public on a timely basis. The bibliography is divided into a master record list arranged in alpha-numeric order by report identification number, with separate indices arranged by title, author, state and county, 1/sup 0/ x 2/sup 0/ NTMS quadrangle, key words, and exploration area.

National Uranium Resource Evaluation. Bibliographic index of Grand Junction office uranium reports

International Nuclear Information System (INIS)

Johnson, J.B.

1981-05-01

In October 1978, Mesa College entered into subcontract with Bendix Field Engineering Corporation (BFEC) to prepare a bibliographic index of the uranium raw materials reports issued by the Grand Junction Office of the US Department of Energy (DOE). Bendix, prime contractor to the Grand Junction Office, operates the Technical Library at the DOE facility. Since the early 1950s, approximately 2700 reports have been issued by the Grand Junction Office. These reports were the results of uranium investigations conducted by federal agencies and their subcontractors. The majority of the reports cover geology, mineralogy, and metallurgy of uranium and/or thorium. No single, complete list of these reports existed. The purpose of this subcontract was to compile a comprehensive index to these reports. The Mesa College geology faculty worked with the BFEC and DOE staffs to develop the format for the index. Undergraduate geology students from Mesa compiled a master record sheet for each report. All reports issued up to January 1, 1979 were included in the bibliography. The bibliography is in preliminary, unedited form. It is being open-filed at this time, on microfiche, to make the information available to the public on a timely basis. The bibliography is divided into a master record list arranged in alpha-numeric order by report identification number, with separate indices arranged by title, author, state and county, 1 0 x 2 0 NTMS quadrangle, key words, and exploration area

40 CFR 406.10 - Applicability; description of the corn wet milling subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the corn wet milling subcategory. 406.10 Section 406.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Corn Wet Milling...

40 CFR 406.20 - Applicability; description of the corn dry milling subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the corn dry milling subcategory. 406.20 Section 406.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Corn Dry Milling...

40 CFR 415.140 - Applicability; description of the sodium bicarbonate production subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the sodium bicarbonate production subcategory. 415.140 Section 415.140 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY Sodium Bicarbonate...

Maintenance Staffing Standards for Zero-Based Budgeting.

Science.gov (United States)

Adams, Matthew C.; And Others

1998-01-01

Discusses school preventive maintenance and the variables associated with maintenance staffing standards that address a zero-based budgeting environment. Explores preventive-maintenance measurement for staffing requirements, defines staffing levels and job descriptions, and outlines the factors to consider when creating a maintenance program and…

Procedures and Standards Handbook. Version 3.0. What Works Clearinghouse

Science.gov (United States)

What Works Clearinghouse, 2014

2014-01-01

This "What Works Clearinghouse Procedures and Standards Handbook (Version 3.0)" provides a detailed description of the standards and procedures of the What Works Clearinghouse (WWC). The remaining chapters of this Handbook are organized to take the reader through the basic steps that the WWC uses to develop a review protocol, identify…

Status of non-standard neutrino interactions

International Nuclear Information System (INIS)

Ohlsson, Tommy

2013-01-01

The phenomenon of neutrino oscillations has been established as the leading mechanism behind neutrino flavor transitions, providing solid experimental evidence that neutrinos are massive and lepton flavors are mixed. Here we review sub-leading effects in neutrino flavor transitions known as non-standard neutrino interactions (NSIs), which is currently the most explored description for effects beyond the standard paradigm of neutrino oscillations. In particular, we report on the phenomenology of NSIs and their experimental and phenomenological bounds as well as an outlook for future sensitivity and discovery reach. (review article)

Development of a standardized job description for healthcare managers of metabolic syndrome management programs in Korean community health centers.

Science.gov (United States)

Lee, Youngjin; Choo, Jina; Cho, Jeonghyun; Kim, So-Nam; Lee, Hye-Eun; Yoon, Seok-Jun; Seomun, GyeongAe

2014-03-01

This study aimed to develop a job description for healthcare managers of metabolic syndrome management programs using task analysis. Exploratory research was performed by using the Developing a Curriculum method, the Intervention Wheel model, and focus group discussions. Subsequently, we conducted a survey of 215 healthcare workers from 25 community health centers to verify that the job description we created was accurate. We defined the role of healthcare managers. Next, we elucidated the tasks of healthcare managers and performed needs analysis to examine the frequency, importance, and difficulty of each of their duties. Finally, we verified that our job description was accurate. Based on the 8 duties, 30 tasks, and 44 task elements assigned to healthcare managers, we found that the healthcare managers functioned both as team coordinators responsible for providing multidisciplinary health services and nurse specialists providing health promotion services. In terms of importance and difficulty of tasks performed by the healthcare managers, which were measured using a determinant coefficient, the highest-ranked task was planning social marketing (15.4), while the lowest-ranked task was managing human resources (9.9). A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs. Copyright © 2014. Published by Elsevier B.V.

40 CFR 413.20 - Applicability: Description of the electroplating of precious metals subcategory.

Science.gov (United States)

2010-07-01

... electroplating of precious metals subcategory. 413.20 Section 413.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTROPLATING POINT SOURCE CATEGORY Electroplating of Precious Metals Subcategory § 413.20 Applicability: Description of the electroplating of...

MET Standards for Electro-Technical Officers

Directory of Open Access Journals (Sweden)

Janusz Mindykowski

2014-12-01

Full Text Available The paper deals with one of the most important changes in the STCW 1978 as amended in 2010 Convention, from the point of view of the watchkeeping officers responsible for control, maintenance, diagnostic and repair of electrical and electronic installations on board of ships. Some reasons, why the MET Standards for Electro-Technical had to be developed and implemented are shortly analyzed and described. A legislative way towards and a short description of the minimum standards competence for ETO are presented. Next, new tools supporting ETO’s standards implementation are appointed. Finally, the future works as well as the concluding remarks concerning discussed issue are formulated and commented on.

Lectures on perturbative QCD, jets and the standard model: collider phenomenology

International Nuclear Information System (INIS)

Ellis, S.D.

1988-01-01

Applications of the Standard Model to the description of physics at hadron colliders are discussed. Particular attention is paid to the use of jets to characterize this physics. The issue of identifying physics beyond the Standard Model is also discussed. 59 refs., 6 figs., 4 tabs

APS beamline standard components handbook, Version 1.3

International Nuclear Information System (INIS)

Hahn, U.; Shu, D.; Kuzay, T.M.

1993-02-01

This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

National inventory of selected biological monitoring programs. Summary report of current or recently completed projects, 1976

Energy Technology Data Exchange (ETDEWEB)

Kemp, H. T.

1976-10-01

The Inventory has resulted in establishment of a series of data bases containing biological monitoring information of varying types, namely, directory of investigators, record of projects received from mail questionnaire, detailed description of selected biomonitoring projects, and bibliographic citations supporting the projects received. This report contains detailed descriptions of selected biomonitoring projects organized on a state-by-state basis and with appropriate indices.

Selected issues of the universal communication environment implementation for CII standard

Science.gov (United States)

Zagoździńska, Agnieszka; Poźniak, Krzysztof T.; Drabik, Paweł K.

2011-10-01

In the contemporary FPGA market there is the wide assortment of structures, integrated development environments, and boards of different producers. The variety allows to fit resources to requirements of the individual designer. There is the need of standardization of the projects to make it useful in research laboratories equipped with different producers tools. Proposed solution is CII standardization of VHDL components. This paper contains specification of the universal communication environment for CII standard. The link can be used in different FPGA structures. Implementation of the link enables object oriented VHDL programming with the use of CII standardization. The whole environment contains FPGA environment and PC software. The paper contains description of the selected issues of FPGA environment. There is description of some specific solutions that enables environment usage in structures of different producers. The flexibility of different size data transmissions with the use of CII is presented. The specified tool gives the opportunity to use FPGA structures variety fully and design faster and more effectively.

An Exploratory Study into Perceived Task Complexity, Topic Specificity and Usefulness for Integrated Search

DEFF Research Database (Denmark)

Ingwersen, Peter; Lioma, Christina; Larsen, Birger

2012-01-01

We investigate the relations between user perceptions of work task complexity, topic specificity, and usefulness of retrieved results. 23 academic researchers submitted detailed descriptions of 65 real-life work tasks in the physics domain, and assessed documents retrieved from an integrated...... collection consisting of full text research articles in PDF, abstracts, and bibliographic records [6]. Bibliographic records were found to be more precise than full text PDFs, regardless of task complexity and topic specificity. PDFs were found to be more useful. Overall, for higher task complexity and topic...

Description and Codification of Miscanthus × giganteus Growth Stages for Phenological Assessment

Directory of Open Access Journals (Sweden)

Mauricio D. Tejera

2017-10-01

Full Text Available Triploid Miscanthus × giganteus (Greef et Deu. ex Hodkinson et Renvoize is a sterile, perennial grass used for biomass production in temperate environments. While M. × giganteus has been intensively researched, a scale standardizing description of M. × giganteus morphological stages has not been developed. Here we provide such a scale by adapting the widely-used Biologische Bundesanstalt, Bundessortenamt, CHemische Industrie (BBCH scale and its corresponding numerical code to describe stages of morphological development in M. × giganteus using observations of the “Freedom” and “Illinois” clone in Iowa, USA. Descriptive keys with images are also presented. Because M. × giganteus plants overlap in the field, the scale was first applied to individual stems and then scaled up to assess plants or communities. Of the 10 principal growth stages in the BBCH system, eight were observed in M. × giganteus. Each principal stage was subdivided into secondary stages to enable a detailed description of developmental progression. While M. × giganteus does not have seed development stages, descriptions of those stages are provided to extend the scale to other Miscanthus genotypes. We present methods to use morphological development data to assess phenology by calculating the onset, duration, and abundance of each developmental stage. This scale has potential to harmonize previously described study-specific scales and standardize results across studies. Use of the precise staging presented here should more tightly constrain estimates of developmental parameters in crop models and increase the efficacy of timing-sensitive crop management practices like pest control and harvest.

Completely reproducible description of digital sound data with cellular automata

International Nuclear Information System (INIS)

Wada, Masato; Kuroiwa, Jousuke; Nara, Shigetoshi

2002-01-01

A novel method of compressive and completely reproducible description of digital sound data by means of rule dynamics of CA (cellular automata) is proposed. The digital data of spoken words and music recorded with the standard format of a compact disk are reproduced completely by this method with use of only two rules in a one-dimensional CA without loss of information

40 CFR 417.160 - Applicability; description of the manufacture of liquid detergents subcategory.

Science.gov (United States)

2010-07-01

... manufacture of liquid detergents subcategory. 417.160 Section 417.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Manufacture of Liquid Detergents Subcategory § 417.160 Applicability; description of the...

40 CFR 407.60 - Applicability; description of the canned and preserved fruits subcategory.

Science.gov (United States)

2010-07-01

... canned and preserved fruits subcategory. 407.60 Section 407.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CANNED AND PRESERVED FRUITS AND VEGETABLES PROCESSING POINT SOURCE CATEGORY Canned and Preserved Fruits Subcategory § 407.60 Applicability; description...

40 CFR 413.10 - Applicability: Description of the electroplating of common metals subcategory.

Science.gov (United States)

2010-07-01

... electroplating of common metals subcategory. 413.10 Section 413.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTROPLATING POINT SOURCE CATEGORY Electroplating of Common Metals Subcategory § 413.10 Applicability: Description of the electroplating of common...

Crew Transportation Technical Standards and Design Evaluation Criteria

Science.gov (United States)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

75 FR 18850 - National Protection and Programs Directorate; Chemical Facility Anti-Terrorism Standards...

Science.gov (United States)

2010-04-13

... Directorate; Chemical Facility Anti-Terrorism Standards Personnel Surety Program AGENCY: National Protection...-terrorism Vulnerability Information (CVI), Sensitive Security Information (SSI), or Protected Critical... . SUPPLEMENTARY INFORMATION: Program Description The Chemical Facility Anti-Terrorism Standards (CFATS), 6 CFR...

Bibliographical study for the development of an electrochemical preparation of plutonium molten salts; Etude bibliographique en vue de la mise au point d'une preparation electrochimique en sels fondus du plutonium

Energy Technology Data Exchange (ETDEWEB)

Lefevre, J.

1957-01-15

Based on an analogy with methods of electrochemical preparation of uranium molten salts, this bibliographical study reports data of physical properties of plutonium (melting point, density, ranges of existence of the different plutonium phases, resistivity, resistivity variation coefficient), discusses the search for an electrolytic bath (properties of plutonium bromides, chlorides and fluorides), and the required apparatus (an electrolysis cell)

Preparation of plant and system design description documents

International Nuclear Information System (INIS)

1989-01-01

This standard prescribes the purpose, scope, organization, and content of plant design requirements (PDR) documents and system design descriptions (SDDs), to provide a unified approach to their preparation and use by a project as the principal means to establish the plant design requirements and to establish, describe, and control the individual system designs from conception and throughout the lifetime of the plant. The Electric Power Research Institute's Advanced Light Water Reactor (LWR) Requirements Document should be considered for LWR plants

Geoprospective study of a nuclear waste repository: salt domes; Bibliographic study of their genesis

International Nuclear Information System (INIS)

Billaux, D.; Robelin, C.

1985-01-01

This report appraises, from the results of a bibliographical study, the possibility of beginning of a domal rise from the salt layer in which or above which would have been placed a repository. The physical mecanisms of salt creep are first screened, together with the factors determining their intensity and relative importance. These factors are primarily the temperature and the state of stress. Semi empirical laws are given for some mecanisms. Present knowledge about the state of the salt in the ground are then examined: we are not able to satisfactorily calculate ''in situ'' stresses, or to explain the existence of an important shear stress, that has been pointed out by most of the stress measurements. The retrospective study of the genesis of existing domes brings an insight into their correlation with sedimentary and tectonic phases. Model studies help us to interpret the distances between domes, and to explain the scale of this phenomenon. After recapitulating the various factors of some importance, we find that the probability of a dome rise from a previously static layer is low, in the time lap we are interested in (100 000 years). Such a rise would have to be triggered by important changes in the sedimentation, erosion or tectonic activity on the site

40 CFR 440.140 - Applicability; description of the gold placer mine subcategory.

Science.gov (United States)

2010-07-01

... separation methods for recovering gold from placer deposits. (b) The provisions of this subpart M are not... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the gold... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Gold...

Application of Resource Description Framework to Personalise Learning: Systematic Review and Methodology

Science.gov (United States)

Jevsikova, Tatjana; Berniukevicius, Andrius; Kurilovas, Eugenijus

2017-01-01

The paper is aimed to present a methodology of learning personalisation based on applying Resource Description Framework (RDF) standard model. Research results are two-fold: first, the results of systematic literature review on Linked Data, RDF "subject-predicate-object" triples, and Web Ontology Language (OWL) application in education…

40 CFR 406.40 - Applicability; description of the bulgur wheat flour milling subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the bulgur wheat flour milling subcategory. 406.40 Section 406.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Bulgur...

40 CFR 406.30 - Applicability; description of the normal wheat flour milling subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the normal wheat flour milling subcategory. 406.30 Section 406.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Normal...

Building a Disciplinary Metadata Standards Directory

Directory of Open Access Journals (Sweden)

Alexander Ball

2014-07-01

Full Text Available The Research Data Alliance (RDA Metadata Standards Directory Working Group (MSDWG is building a directory of descriptive, discipline-specific metadata standards. The purpose of the directory is to promote the discovery, access and use of such standards, thereby improving the state of research data interoperability and reducing duplicative standards development work.This work builds upon the UK Digital Curation Centre's Disciplinary Metadata Catalogue, a resource created with much the same aim in mind. The first stage of the MSDWG's work was to update and extend the information contained in the catalogue. In the current, second stage, a new platform is being developed in order to extend the functionality of the directory beyond that of the catalogue, and to make it easier to maintain and sustain. Future work will include making the directory more amenable to use by automated tools.

COG Software Architecture Design Description Document

International Nuclear Information System (INIS)

Buck, R.M.; Lent, E.M.

2009-01-01

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Reinforcing the foundations of ornithological nomenclature: Filling the gaps in Sherborn's and Richmond's historical legacy of bibliographic exploration.

Science.gov (United States)

Dickinson, Edward C

2016-01-01

Due to its public popularity, ornithology has a huge corpus of scientific publication for a relatively small number of species. Although there are global checklists of currently recognised taxa, there has been only limited, mainly individual, effort to build a nomenclatural database that the science of ornithology deserves. This is especially true in relation to concise synonymies. With the arrival of ZooBank and the Biodiversity Heritage Library, the time has come to develop synonymies and to add fuller bibliographic detail to databases. The preparation for both began at the start of the 20(th) century with extensive work by Sherborn and Richmond. I discuss their legacy, offer notes on significant work since then, and provide suggestions for what remains to be done. To make solid the foundations for ornithological nomenclature and taxonomy, especially for synonymies, ornithologists will need to collaborate much more and contribute to the digital infrastructure.

Global multiplicity of dietary standards for trace elements.

Science.gov (United States)

Freeland-Graves, Jeanne H; Lee, Jane J

2012-06-01

Consistent guidelines across the world for dietary standards of trace elements remain elusive. Harmonization of dietary standards has been suggested by international agencies to facilitate consistency in food and nutrition policies and international trade. Yet significant barriers exist to standardize recommendations on a global basis, such as vast differences in geography, food availability and transport; cultural, social and economic constraints, and biological diversity. Simple commonality is precluded further by the variety of terminologies among countries and regions related to diet. Certain unions have created numerous nutritional descriptive categories for standards, while other large countries are limited to only a few. This paper will explore the global multiplicity of dietary standards and efforts for harmonization. Copyright © 2012 Elsevier GmbH. All rights reserved.

The Euro-Mediterranean Tsunami Catalogue

Directory of Open Access Journals (Sweden)

Alessandra Maramai

2014-08-01

Full Text Available A unified catalogue containing 290 tsunamis generated in the European and Mediterranean seas since 6150 B.C. to current days is presented. It is the result of a systematic and detailed review of all the regional catalogues available in literature covering the study area, each of them having their own format and level of accuracy. The realization of a single catalogue covering a so wide area and involving several countries was a complex task that posed a series of challenges, being the standardization and the quality of the data the most demanding. A “reliability” value was used to rate equally the quality of the data for each event and this parameter was assigned based on the trustworthiness of the information related to the generating cause, the tsunami description accuracy and also on the availability of coeval bibliographical sources. Following these criteria we included in the catalogue events whose reliability ranges from 0 (“very improbable tsunami” to 4 (“definite tsunami”. About 900 documentary sources, including historical documents, books, scientific reports, newspapers and previous catalogues, support the tsunami data and descriptions gathered in this catalogue. As a result, in the present paper a list of the 290 tsunamis with their main parameters is reported. The online version of the catalogue, available at http://roma2.rm.ingv.it/en/facilities/data_bases/52/catalogue_of_the_euro-mediterranean_tsunamis, provides additional information such as detailed descriptions, pictures, etc. and the complete list of bibliographical sources. Most of the included events have a high reliability value (3= “probable” and 4= “definite” which makes the Euro-Mediterranean Tsunami Catalogue an essential tool for the implementation of tsunami hazard and risk assessment.

LTE-Advanced Relay Technology and Standardization

CERN Document Server

Yuan, Yifei

2013-01-01

LTE-Advanced Relay Technology and Standardization provides a timely reference work for relay technology with the finalizing of LTE Release 10 specifications. LTE-Advanced is quickly becoming the global standard for 4G cellular communications. The relay technology, as one of the key features in LTE-Advanced, helps not only to improve the system coverage and capacity, but also to save the costs of laying wireline backhaul. As a leading researcher in the field of LTE-Advanced standards, the author provides an in-depth description of LTE-A relay technology, and explains in detail the standard specification and design principles.     Readers from both academic and industrial fields can find sections of interest to them: Sections 2 & 4 could benefit researchers in academia and those who are engaged in exploratory work, while Sections 3 & 4 are more useful to engineers. Dr. Yifei Yuan is the Technical Director at the Standards Department of ZTE Inc.

Introducing Online Bibliographic Service to its Users: The Online Presentation

Science.gov (United States)

Crane, Nancy B.; Pilachowski, David M.

1978-01-01

A description of techniques for introducing online services to new user groups includes discussion of terms and their definitions, evolution of online searching, advantages and disadvantages of online searching, production of the data bases, search strategies, Boolean logic, costs and charges, "do's and don'ts," and a user search questionnaire. (J…

An Efficient Explicit-time Description Method for Timed Model Checking

Directory of Open Access Journals (Sweden)

Hao Wang

2009-12-01

Full Text Available Timed model checking, the method to formally verify real-time systems, is attracting increasing attention from both the model checking community and the real-time community. Explicit-time description methods verify real-time systems using general model constructs found in standard un-timed model checkers. Lamport proposed an explicit-time description method using a clock-ticking process (Tick to simulate the passage of time together with a group of global variables to model time requirements. Two methods, the Sync-based Explicit-time Description Method using rendezvous synchronization steps and the Semaphore-based Explicit-time Description Method using only one global variable were proposed; they both achieve better modularity than Lamport's method in modeling the real-time systems. In contrast to timed automata based model checkers like UPPAAL, explicit-time description methods can access and store the current time instant for future calculations necessary for many real-time systems, especially those with pre-emptive scheduling. However, the Tick process in the above three methods increments the time by one unit in each tick; the state spaces therefore grow relatively fast as the time parameters increase, a problem when the system's time period is relatively long. In this paper, we propose a more efficient method which enables the Tick process to leap multiple time units in one tick. Preliminary experimental results in a high performance computing environment show that this new method significantly reduces the state space and improves both the time and memory efficiency.

Position paper on standardization

International Nuclear Information System (INIS)

1991-04-01

The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

Operational procedure standard for occurrences involving radioactive materials

International Nuclear Information System (INIS)

Piekarz, Leonardo; Rezende, Talita C.; Pinheiro, Christiano J.G.

2017-01-01

This study has as objective to analyze more deeply the actions of response to emergencies involving radioactive materials, in the intent to establish a pattern to the actions performed by the military fire fighters of the Military Fire Brigade of Minas Gerais. To met these goals, it has been attempted to analyze the procedures utilized and recommended, nowadays, for the military fire fighters of CBMMG, and through directed studies, to suggest new actions possible to be executed in the local of the emergency in a way that will not expose the garrison to doses of ionizing radiation that may prejudice them. It is a study of bibliographic, exploratory, and also descriptive nature, realized through a qualitative approach. The techniques used for the research were the analysis of institutional documents, norms and other literature produced by renamed entities in the radiologic and biosafety areas. It was then concluded that CBMMG, through simple actions of response, can provide higher quality and safety in the operations involving radiologic accidents, standing out that the implemented actions nowadays are very beneath the capacity of the corporation, due to the lack of knowledge of the matter by the fire fighters. It was proposed, then, that new actions be implemented and instituted as operational procedures to be used on those emergencies, with the objective of provide a higher safety and professionalism in the attendance to emergencies involving radioactive materials. (author)

Operational procedure standard for occurrences involving radioactive materials

Energy Technology Data Exchange (ETDEWEB)

Piekarz, Leonardo, E-mail: leonardopbm@yahoo.com.br [Academia de Bombeiros Militar de Minas Gerais, Belo Horizonte, MG (Brazil); Rezende, Talita C.; Pinheiro, Christiano J.G., E-mail: talitacolombi@yahoo.com, E-mail: christrieste@yahoo.it [Universidade Federal do Espirito Santo (CCA/UFES), Alegre, ES (Brazil). Programa de Pós-Graduação em Engenharia Química

2017-07-01

This study has as objective to analyze more deeply the actions of response to emergencies involving radioactive materials, in the intent to establish a pattern to the actions performed by the military fire fighters of the Military Fire Brigade of Minas Gerais. To met these goals, it has been attempted to analyze the procedures utilized and recommended, nowadays, for the military fire fighters of CBMMG, and through directed studies, to suggest new actions possible to be executed in the local of the emergency in a way that will not expose the garrison to doses of ionizing radiation that may prejudice them. It is a study of bibliographic, exploratory, and also descriptive nature, realized through a qualitative approach. The techniques used for the research were the analysis of institutional documents, norms and other literature produced by renamed entities in the radiologic and biosafety areas. It was then concluded that CBMMG, through simple actions of response, can provide higher quality and safety in the operations involving radiologic accidents, standing out that the implemented actions nowadays are very beneath the capacity of the corporation, due to the lack of knowledge of the matter by the fire fighters. It was proposed, then, that new actions be implemented and instituted as operational procedures to be used on those emergencies, with the objective of provide a higher safety and professionalism in the attendance to emergencies involving radioactive materials. (author)

Principles and objectives for the operation and support of standard nuclear plants

International Nuclear Information System (INIS)

1994-08-01

This publication provides the guiding principles and objectives for the operation and support of standard nuclear plants. They are the basis for designing the processes to operate and support the new plants and to estimate the staffing options. INPO has facilitated and coordinated the development of these principles and objectives under the industry's Strategic Plan for Building New Nuclear Power Plants. The industry's plan, first published in 1990, designates INPO as the lead in achieving the following goals: 1. Establish an institutional framework and approach to implement and maintain a model for life-cycle standardization of a family of plants. 2. Develop standardization objectives and selected standardized function and process descriptions to provide a basis for uniformity in appropriate aspects of the organizational structure; administrative controls; and construction, startup, operating, and maintenance practices. 3. Develop an approach to maintain the standard design and design intent as well as standardized operational approaches in all units within a family of plants over their lifetimes. This document supports these goals. Twelve guiding principles are followed by descriptions of four functions, and after that eight processes with their associated objectives

ICC 700-2012: 2012 National Green Building Standard (ICC 700)

Science.gov (United States)

Description of the ICC 700-2012: 2012 National Green Building Standard, a rating and certification system that aims to encourage increased environmental and health performance in residences and residential portions of buildings.

METHODS FOR DESCRIPTION OF EDUCATION AND SCIENTIFIC SERVICES IN INFORMATION AND EDUCATION ON THE BASIS OF INTEROPERABILITY STACK EIF

Directory of Open Access Journals (Sweden)

Ekaterina V. Pavlova

2015-01-01

Full Text Available The article deals with methodology for description of scientifi c and educational services in education and information on the basis of interoperability stack EIF (European Interoperability Framework. The passage describes operation factors to depict services on every level of the methodology, tools used to describe the services and the content. We also provide the link between methodology of description with the life span of the service. The article presents an example of service description according to the methodology considering the current education and professional standards, ITIL recommendations, ontology on the OWL basis and WSDL-description. 

Heavy metals and terrestrial cryptograms. A bibliographic synthesis

Energy Technology Data Exchange (ETDEWEB)

Margot, J.; Romain, M.T.

1976-01-01

Heavy metals pollution is a present-day problem as it concerns the entire continent. Terrestrial cryptograms are not of long-standing use as bioindicators in this respect and require a synthesis of the recent publications. Characteristics of heavy metals in the atmosphere, especially mosses and lichens, utilizable as bioindicators are briefly reported. They are followed by more accurate descriptions of phenomena on the level with the plant itself: absorption, accumulation, translocation, tolerance and other physico-chemical processes. The statement of deleterious effects on these organisms is then given: external symptoms, cytological localization, metabolic disturbances and ecological aspects. Further research propositions are presented. 128 references.

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Metadados digitais: revisão bibliográfica da evolução e tendências por meio de categorias funcionaisDigital metadata: bibliographical review on evolution and trends using functional categories

Directory of Open Access Journals (Sweden)

Luiz Fernando de Barros Campos

2007-01-01

Full Text Available Revisão bibliográfica sobre metadados digitais no campo da ciência da informação, objetivando precisar as várias funcionalidades dos metadados. Empregando-se uma técnica de análise de conteúdo temática, constatou-se a recorrência de tecnologias como XML, RDFS, ontologias, data warehouses, Web Semântica, serviços Web, entre outras, e de dez categorias relativas às funções dos metadados que fundamentavam os textos examinados. Com suporte na análise temática, adotando-se uma perspectiva técnica e histórica, relacionaram-se as categorias funcionais às tecnologias e mostrou-se como as categorias são tratadas em dezenove dos artigos revisados, destacando-se as ênfases empregadas e a convergência dos temas. Notou-se que trabalhos e tecnologias que versam sobre padrões e modelos para preservação digital adotam perspectivas mais abrangentes e integradas, incorporando todas ou quase todas as categorias. Com base nos resultados, foram comentadas tendências e questões latentes percebidas na revisão bibliográfica, e sugeridas abordagens e metodologias para a análise de metadados e das tecnologias relacionadas.By means of a bibliographical review on digital metadata in the information science field, aiming to distinguish the various functionalities of metadata and employing thematic content analysis, it was noticed the recurrence of technologies like XML, RDFS, ontology, data warehouses, semantic Web, Web services, among others, and of certain categories connected to metadata functions that grounded the examined works. Based on these findings, adopting a technical and historical approach, the functional categories were related to the technologies and it was showed how the categories wereexpounded in 19 texts selected from the review. It was observed that studies and technologies that deal with models and standards for digital preservation adopt more comprehensive and integrated perspectives, encompassing all or nearly all

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

A comparision of modified and standard papanicolaou staining ...

African Journals Online (AJOL)

Objective: To compare modified and standard Papanicolaou (Pap) staining methods in the assessment of the cervical smears. Design: A descriptive cross sectional study. setting: Kenyatta National Hospital. Subjects: One hundred and sixty two women who were eligible for a pap smear and met the inclusion criteria.

An object-oriented description method of EPMM process

Science.gov (United States)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

Secondary standard dosimetry laboratory at the Boris Kidric Institute

International Nuclear Information System (INIS)

Kovacevic, M.; Velickovic, D.; Vukcevic, M.

1989-01-01

Essential data about Secondary Standard Dosimetry Laboratory at the Boris Kidric Institute are stated in this paper. The description of the laboratory is given and the possibilities of X, gamma and neutron dose measurements, as well as the basic equipment (author)

CytometryML: a data standard which has been designed to interface with other standards

Science.gov (United States)

Leif, Robert C.

2007-02-01

Because of the differences in the requirements, needs, and past histories including existing standards of the creating organizations, a single encompassing cytology-pathology standard will not, in the near future, replace the multiple existing or under development standards. Except for DICOM and FCS, these standardization efforts are all based on XML. CytometryML is a collection of XML schemas, which are based on the Digital Imaging and Communications in Medicine (DICOM) and Flow Cytometry Standard (FCS) datatypes. The CytometryML schemas contain attributes that link them to the DICOM standard and FCS. Interoperability with DICOM has been facilitated by, wherever reasonable, limiting the difference between CytometryML and the previous standards to syntax. In order to permit the Resource Description Framework, RDF, to reference the CytometryML datatypes, id attributes have been added to many CytometryML elements. The Laboratory Digital Imaging Project (LDIP) Data Exchange Specification and the Flowcyt standards development effort employ RDF syntax. Documentation from DICOM has been reused in CytometryML. The unity of analytical cytology was demonstrated by deriving a microscope type and a flow cytometer type from a generic cytometry instrument type. The feasibility of incorporating the Flowcyt gating schemas into CytometryML has been demonstrated. CytometryML is being extended to include many of the new DICOM Working Group 26 datatypes, which describe patients, specimens, and analytes. In situations where multiple standards are being created, interoperability can be facilitated by employing datatypes based on a common set of semantics and building in links to standards that employ different syntax.

Perspectives in the standard model

International Nuclear Information System (INIS)

Ellis, R.K.; Hill, C.T.; Lykken, J.D.

1992-01-01

Particle physics is an experimentally based science, with a need for the best theorists to make contact with data and to enlarge and enhance their theoretical descriptions as the subject evolves. The authors felt it imperative that the TASI (Theoretical Advanced Study Institute) program reflect this need. The goal of this conference, was to provide the students with a comprehensive look at the current understanding of the standard model, as well as the techniques which promise to advance that understanding in the future. Topics covered include: symmetry breaking in the standard model; physics beyond the standard model; chiral effective Lagrangians; semi-classical string theory; renormalization of electroweak gauge interactions; electroweak experiments at LEP; the CKM matrix and CP violation; axion searches; lattice QCD; perturbative QCD; heavy quark effective field theory; heavy flavor physics on the lattice; and neutrinos. Separate abstracts were prepared for 13 papers in this conference

Review of the Commission program for standardization of nuclear power plants and recommendations to improve standardization concepts

International Nuclear Information System (INIS)

1978-02-01

This is a report of a staff study describing the need and utility of specific changes to the Commission's standardization program. The various matters considered in the study include: (1) A discussion of industry use to date of the standardization program. (2) A discussion of the experience to date with each of the standardization concepts. (3) A review of public comments on the standardization program and the staff response to each principal comment. (4) A review of the need for standardization considering the likely number of license applications to be submitted in the coming years. (5) A discussion of the reference system concept, including review of applicable experience and recommended changes to the concept. (6) A discussion of the duplicate plant concept, including review of applicable experience and recommended changes to the concept. (7) A discussion of the manufacturing license concept, including review of applicable experience and recommended changes to the concept. (8) A discussion of the replicate plant concept, including review of applicable experience and recommended changes to the concept. (9) A discussion of the effective periods for approved designs under all four standardization concepts. (10) A description of continuing staff activities related to the standardization program

Developing Archive Information Packages for Data Sets: Early Experiments with Digital Library Standards

Science.gov (United States)

Duerr, R. E.; Yang, M.; Gooyabadi, M.; Lee, C.

2008-12-01

The key to interoperability between systems is often metadata, yet metadata standards in the digital library and data center communities have evolved separately. In the data center world NASA's Directory Interchange Format (DIF), the Content Standard for Digital Geospatial Metadata (CSDGM), and most recently the international Geographic Information: Metadata (ISO 19115:2003) are used for descriptive metadata at the data set level to allow catalog interoperability; but use of anything other than repository- based metadata standards for the individual files that comprise a data set is rare, making true interoperability, at the data rather than data set level, across archives difficult. While the Open Archival Information Systems (OAIS) Reference Model with its call for creating Archive Information Packages (AIP) containing not just descriptive metadata but also preservation metadata is slowly being adopted in the community, the PREservation Metadata Implementation Strategies (PREMIS) standard, the only extant OAIS- compliant preservation metadata standard, has scarcely even been recognized as being applicable to the community. The digital library community in the meantime has converged upon the Metadata Encoding and Transmission Standard (METS) for interoperability between systems as evidenced by support for the standard by digital library systems such as Fedora and Greenstone. METS is designed to allow inclusion of other XML-based standards as descriptive and administrative metadata components. A recent Stanford study suggests that a combination of METS with included FGDC and PREMIS metadata could work well for individual granules of a data set. However, some of the lessons learned by the data center community over the last 30+ years of dealing with digital data are 1) that data sets as a whole need to be preserved and described and 2) that discovery and access mechanisms need to be hierarchical. Only once a user has reviewed a data set description and determined

GlottoVis : Visualizing Language Endangerment and Documentation

NARCIS (Netherlands)

Castermans, T.H.A.; Speckmann, B.; Verbeek, K.A.B.; Westenberg, M.A.; Hammarström, H.

2017-01-01

We present GlottoVis, a system designed to visualize language endangerment as collected by UNESCO and descriptive status as collected by the Glottolog project. Glottolog records bibliographic data for the world’s (lesser known) languages. Languages are documented with increasing detail, but the

75 FR 3236 - Federal Acquisition Regulation; Submission for OMB Review; Cost Accounting Standards Administration

Science.gov (United States)

2010-01-20

... extension of a previously approved information collection requirement concerning cost accounting standards... include pertinent rules and regulations related to the Cost Accounting Standards along with necessary... impact estimates and descriptions in cost accounting practices and also to provide information on CAS...

Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

Science.gov (United States)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

36 CFR 51.92 - What are standard proformas?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false What are standard proformas? 51.92 Section 51.92 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... narrative description must include, but is not limited to, identification of the loan's collateral after...

Bibliographic report on the synthesis, the chemical and physical properties and the applications of the TBP phosphate

International Nuclear Information System (INIS)

Azzouz, A.; Attou, M.

1985-02-01

This work consists of a bibliographic synthesis concerning the tri-n-butylphosphate (TBP) technology. It gathers briefly in 56 references on a table, the multiple applications of TBP such as extraction, spectroscopy and various other uses. Then, it deals with chemical instability different causes of this substance as well as its physical and chemical properties. In this way, for instance, the thermal degradation occurs well before the TBP boiling point. It comes out of this, several decomposition products such as the mono-n-butyl-phosphate (MBP), the di-n-butylphosphate (DBP) and some olefins. The acids and some impurities are known to have effects on TBP degradation. Later on, some processes of the TBP synthesis and their principles are stated. In the major cases, the POCl 3 process seems to be the best way, probably because of convenient efficiencies and moderate conditions of its making. Some purification processes according to the TBP use are also invoqued. In this case as well, Alcock et al. method is often stated in the literature. Moreover, five analysis methods corresponding to the most common situations are described

Introduction to physics beyond the Standard Model

CERN Document Server

Giudice, Gian Francesco

1998-01-01

These lectures will give an introductory review of the main ideas behind the attempts to extend the standard-model description of elementary particle interactions. After analysing the conceptual motivations that lead us to blieve in the existence of an underlying fundamental theory, wi will discuss the present status of various theoretical constructs : grand unification, supersymmetry and technicolour.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

Standardized evaluation of accident victims: demands on diagnostic trauma

International Nuclear Information System (INIS)

Kanz, K.G.; Mutschler, W.; Linsenmaier, U.; Pfeifer, K.J.

2002-01-01

Introduction. Evaluation of trauma systems requires a complete and exact injury classification. The purpose of this study was the introduction of the Abbreviated injury scale (AIS) for radiological trauma scoring. The development of these easy to use coding tools is essential for prompt quality management of trauma.Material and methods. Standardized radiological injury description using a modified Abbreviated injury scale in combination with a Microsoft Excel trademark spreadsheet allows an immediate calculation of the probability of survival according to TRISS methodology.Results. Computed tomography is the main instrument for injury scoring in trauma care. Postmortem scanning provides a direct feedback for trauma teams especially in cases when autopsy is not possible.Conclusion. Computed tomography enables in combination with a standardized injury description exact trauma scoring. Quality management of trauma care depends on a valid and reliable calculation of the probability of survival using TRISS. (orig.) [de

Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

Science.gov (United States)

Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

ISO radiation protection standards

International Nuclear Information System (INIS)

Becker, K.; West, N.

1981-01-01

After a brief description of the International Organization for Standardization (ISO) and its Technical Committee (TC) 85 ''Nuclear Energy'', the work of its Sub-Committee (SC) 2 ''Radiation Protection'' is described in some detail. Several international standards on subjects closely related to radiation protection have already been published, for example ISO-361 (Basic radiation protection symbol), ISO-1757 (Photographic dosimeters), ISO-1758 and 1759 (Direct and indirect-reading pocket exposure meters), ISO-2889 (Sampling of airborne radioactive materials), ISO-4037 (X and gamma reference radiations for calibration) and ISO-4071 (Testing of exposure meters and dosimeters). TC 85/SC 2 has currently eight active Working Groups (WG) dealing with 14 standards projects, mostly in advanced stages, in such fields as neutron and beta reference radiations, and X and gamma radiations of high and low dose-rates and high energies for calibration purposes, reference radiations for surface contamination apparatus, ejection systems for gamma radiography apparatus, industrial and laboratory irradiators, lead shielding units, protective clothing, thermoluminescence dosemeters, radioelement gauges, and surface contamination and decontamination. (author)

RDA: a content standard to ensure the quality of data

Directory of Open Access Journals (Sweden)

Carlo Bianchini

2016-05-01

Full Text Available RDA Resource Description and Access are guidelines for description and access to resources designed for digital environment and released, in its first version, in 2010. RDA is based on FRBR and its derived models, that focus on users’ needs and on resources of any kind of content, medium and carrier.  The paper discusses relevance of main features of RDA for the future role of libraries in the context of semantic web and metadata creation and exchange. The paper aims to highlight many consequences deriving from RDA being a content standard, and in particular the change from record management to data management, differences among the two functions realized by RDA (to identify and to relate entities and functions realized by other standard such as MARC21 (to archive data and ISB (to visualize data and show how, as all these functions are necessary for the catalog, RDA needs to be integrated by other rules and standard and that these tools allow the fulfilment of the variation principle defined by S.R. Ranganathan.

APS beamline standard components handbook

International Nuclear Information System (INIS)

Kuzay, T.M.

1992-01-01

It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

The Role of Construct Maps in Standard Setting

Science.gov (United States)

Kane, Michael T.; Tannenbaum, Richard J.

2013-01-01

The authors observe in this commentary that construct maps can help standard-setting panels to make realistic and internally consistent recommendations for performance-level descriptions (PLDs) and cut-scores, but the benefits may not be realized if policymakers do not fully understand the rationale for the recommendations provided by the…

Horizons of description: Black holes and complementarity

Science.gov (United States)

Bokulich, Peter Joshua Martin

Niels Bohr famously argued that a consistent understanding of quantum mechanics requires a new epistemic framework, which he named complementarity . This position asserts that even in the context of quantum theory, classical concepts must be used to understand and communicate measurement results. The apparent conflict between certain classical descriptions is avoided by recognizing that their application now crucially depends on the measurement context. Recently it has been argued that a new form of complementarity can provide a solution to the so-called information loss paradox. Stephen Hawking argues that the evolution of black holes cannot be described by standard unitary quantum evolution, because such evolution always preserves information, while the evaporation of a black hole will imply that any information that fell into it is irrevocably lost---hence a "paradox." Some researchers in quantum gravity have argued that this paradox can be resolved if one interprets certain seemingly incompatible descriptions of events around black holes as instead being complementary. In this dissertation I assess the extent to which this black hole complementarity can be undergirded by Bohr's account of the limitations of classical concepts. I begin by offering an interpretation of Bohr's complementarity and the role that it plays in his philosophy of quantum theory. After clarifying the nature of classical concepts, I offer an account of the limitations these concepts face, and argue that Bohr's appeal to disturbance is best understood as referring to these conceptual limits. Following preparatory chapters on issues in quantum field theory and black hole mechanics, I offer an analysis of the information loss paradox and various responses to it. I consider the three most prominent accounts of black hole complementarity and argue that they fail to offer sufficient justification for the proposed incompatibility between descriptions. The lesson that emerges from this

What to use to express the variability of data: Standard deviation or standard error of mean?

Science.gov (United States)

Barde, Mohini P; Barde, Prajakt J

2012-07-01

Statistics plays a vital role in biomedical research. It helps present data precisely and draws the meaningful conclusions. While presenting data, one should be aware of using adequate statistical measures. In biomedical journals, Standard Error of Mean (SEM) and Standard Deviation (SD) are used interchangeably to express the variability; though they measure different parameters. SEM quantifies uncertainty in estimate of the mean whereas SD indicates dispersion of the data from mean. As readers are generally interested in knowing the variability within sample, descriptive data should be precisely summarized with SD. Use of SEM should be limited to compute CI which measures the precision of population estimate. Journals can avoid such errors by requiring authors to adhere to their guidelines.

Tar in road system wastes - bibliographic study - quick characterization methods; Le goudron dans les dechets du reseau routier - etude bibliographique - methodes de caracterisation rapides

Energy Technology Data Exchange (ETDEWEB)

Brazillet, C.; Domas, J.; Pepin, G.

2001-12-15

In the framework of the european regulations on the wastes management, the road structure wastes present a particularly problem because of the tar content and of the toxic associated polycyclic aromatic hydrocarbons. In order to chose the elimination or the valorization of these roads wastes, it is necessary to measure the tar content. After a presentation of the study objectives, a bibliographic study of the context, the challenges, the hydrocarbons, the tar characterization and the today situation of the french road network, the author presents the methods of PAH detection with a special attention on the well known methods: the PAK marker, the TSE and the toluene spot. (A.L.B.)

Development of a Standardized Job Description for Healthcare Managers of Metabolic Syndrome Management Programs in Korean Community Health Centers

Directory of Open Access Journals (Sweden)

Youngjin Lee, RN, PhD

2014-03-01

Conclusion: A job description for healthcare managers may provide basic data essential for the development of a job training program for healthcare managers working in community health promotion programs.

BIBLIO: A Computer System Designed to Support the Near-Library User Model of Information Retrieval.

Science.gov (United States)

Belew, Richard K.; Holland, Maurita Peterson

1988-01-01

Description of the development of the Information Exchange Facility, a prototype microcomputer-based personal bibliographic facility, covers software selection, user selection, overview of the system, and evaluation. The plan for an integrated system, BIBLIO, and the future role of libraries are discussed. (eight references) (MES)

Descriptive analysis of YouTube music therapy videos.

Science.gov (United States)

Gooding, Lori F; Gregory, Dianne

2011-01-01

The purpose of this study was to conduct a descriptive analysis of music therapy-related videos on YouTube. Preliminary searches using the keywords music therapy, music therapy session, and "music therapy session" resulted in listings of 5000, 767, and 59 videos respectively. The narrowed down listing of 59 videos was divided between two investigators and reviewed in order to determine their relationship to actual music therapy practice. A total of 32 videos were determined to be depictions of music therapy sessions. These videos were analyzed using a 16-item investigator-created rubric that examined both video specific information and therapy specific information. Results of the analysis indicated that audio and visual quality was adequate, while narrative descriptions and identification information were ineffective in the majority of the videos. The top 5 videos (based on the highest number of viewings in the sample) were selected for further analysis in order to investigate demonstration of the Professional Level of Practice Competencies set forth in the American Music Therapy Association (AMTA) Professional Competencies (AMTA, 2008). Four of the five videos met basic competency criteria, with the quality of the fifth video precluding evaluation of content. Of particular interest is the fact that none of the videos included credentialing information. Results of this study suggest the need to consider ways to ensure accurate dissemination of music therapy-related information in the YouTube environment, ethical standards when posting music therapy session videos, and the possibility of creating AMTA standards for posting music therapy related video.

Standardization of Tests for Advanced Composites

OpenAIRE

石川, 隆司; ISHIKAWA, Takashi; 野口, 義男; NOGUCHI, Yoshio; 濱口, 泰正; HAMAGUCHI, Yasumasa

2003-01-01

Advanced composites are essentially the only feasible materials for the construction of newly developed aerospace vehicle. However, the path to be followed for the validation, evaluation and certification of composite aircraft structures is quite different from that of traditional metallic aircraft structures, and the importance of a composites database is now well recognized. A key issue in constructing a fully descriptive composites database is to establish standard composite test methods, ...

Cryogenic refrigeration. (Latest citations from the NTIS Bibliographic database). Published Search

International Nuclear Information System (INIS)

1993-09-01

The bibliography contains citations concerning the development and applications of cryogenic refrigeration technology. Citations discuss performance evaluations of specific systems, equipment descriptions, the cooling of instrumentation, superconducting devices, reactor devices, and applications in satellites and spaceborne vehicles. (Contains 250 citations and includes a subject term index and title list.)

Cryogenic refrigeration. (Latest citations from the NTIS bibliographic database). Published Search

International Nuclear Information System (INIS)

1994-12-01

The bibliography contains citations concerning the development and applications of cryogenic refrigeration technology. Citations discuss performance evaluations of specific systems, equipment descriptions, the cooling of instrumentation, superconducting devices, reactor devices, and applications in satellites and spaceborne vehicles. (Contains 250 citations and includes a subject term index and title list.)

40 CFR 417.30 - Applicability; description of the soap manufacturing by fatty acid neutralization subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the soap... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Soap Manufacturing by Fatty Acid Neutralization Subcategory § 417.30 Applicability...

National waste terminal storage conceptual reference repository description

International Nuclear Information System (INIS)

Odgers, I.L.; Collings, J.L.

1981-01-01

The conceptual reference repository description (CRRD) discusses, from a conceptual engineering standpoint, the structures, systems, equipment, and operations necessary to: (1) receive unreprocessed spent fuel assemblies in standard casks; (2) unload these assemblies; (3) place them in canisters; (4) transport the canisters to underground storage locations in the salt dome; and (5) place the canisters in terminal storage. The CRRD also elaborates on the concepts for retrieval and recovery of the spent fuel after burial and describes the development of the shafts and the underground areas, as well as the supporting operational utility and administrative features of the repository

Descriptive set theory

CERN Document Server

Moschovakis, YN

1987-01-01

Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

Utilization of standard treatment guidelines (STG) at primary health ...

African Journals Online (AJOL)

Objective: Standard Treatment Guideline (STG) is an essential structural resource component for quality of care in health facilities. In Tanzania less information is available on STG availability, prescriber's awareness and adherence to its use in line with WHO recommendations. Methods: A cross sectional descriptive study ...

Age 60 Study. Part 1. Bibliographic Database

Science.gov (United States)

1994-10-01

CMIATIONS phanocardlography, study of the arterial distensibility by the carotidogm, and the chronocudiographic meuurement of an index of systolic flow and...pilot performance and age, considering muscular strength, cardio-respiratory capacity, body weight and mental aspects). AEROSPACE MEDICINE, VOL. 42...great differences exhibited in the dynamic muscular endurance, aerobic capacity, power, agility, and coordination for the two groups. The standard

Informatics and Standards for Nanomedicine Technology

Science.gov (United States)

Thomas, Dennis G.; Klaessig, Fred; Harper, Stacey L.; Fritts, Martin; Hoover, Mark D.; Gaheen, Sharon; Stokes, Todd H.; Reznik-Zellen, Rebecca; Freund, Elaine T.; Klemm, Juli D.; Paik, David S.; Baker, Nathan A.

2011-01-01

There are several issues to be addressed concerning the management and effective use of information (or data), generated from nanotechnology studies in biomedical research and medicine. These data are large in volume, diverse in content, and are beset with gaps and ambiguities in the description and characterization of nanomaterials. In this work, we have reviewed three areas of nanomedicine informatics: information resources; taxonomies, controlled vocabularies, and ontologies; and information standards. Informatics methods and standards in each of these areas are critical for enabling collaboration, data sharing, unambiguous representation and interpretation of data, semantic (meaningful) search and integration of data; and for ensuring data quality, reliability, and reproducibility. In particular, we have considered four types of information standards in this review, which are standard characterization protocols, common terminology standards, minimum information standards, and standard data communication (exchange) formats. Currently, due to gaps and ambiguities in the data, it is also difficult to apply computational methods and machine learning techniques to analyze, interpret and recognize patterns in data that are high dimensional in nature, and also to relate variations in nanomaterial properties to variations in their chemical composition, synthesis, characterization protocols, etc. Progress towards resolving the issues of information management in nanomedicine using informatics methods and standards discussed in this review will be essential to the rapidly growing field of nanomedicine informatics. PMID:21721140

Management control and status reports documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 5

Science.gov (United States)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.

Success Prediction: A DDC Bibliography. December 1949--December 1971.

Science.gov (United States)

Defense Documentation Center, Alexandria, VA.

This document contains bibliographic information, descriptive terms, and abstracts for 145 technical reports on the general subject of success prediction. The bibliography includes reports on development of individuals during military training, peer evaluation, biographical inventory, and the validity of tests which may be used as predictors of…

Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system

Science.gov (United States)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Leading-order classical Lagrangians for the nonminimal standard-model extension

Science.gov (United States)

Reis, J. A. A. S.; Schreck, M.

2018-03-01

In this paper, we derive the general leading-order classical Lagrangian covering all fermion operators of the nonminimal standard-model extension (SME). Such a Lagrangian is considered to be the point-particle analog of the effective field theory description of Lorentz violation that is provided by the SME. At leading order in Lorentz violation, the Lagrangian obtained satisfies the set of five nonlinear equations that govern the map from the field theory to the classical description. This result can be of use for phenomenological studies of classical bodies in gravitational fields.

ISO 9000 and quality standards improvement in the maintenance ...

African Journals Online (AJOL)

This study investigated ISO 9000 as a tool for improving quality standards in ... The study used cross-sectional descriptive research design, using quantitative research ... enhance business performance and competiveness of manufacturing firms. ... By Country · List All Titles · Free To Read Titles This Journal is Open Access.

Beyond the standard model

International Nuclear Information System (INIS)

Altarelli, G.

1987-01-01

The standard model of particle interactions is a complete and relatively simple theoretical framework which describes all the observed fundamental forces. It consists of quantum chromodynamics (QCD) and of the electro-weak theory of Glashow, Salam and Weinberg. The former is the theory of colored quarks and gluons, which underlies the observed phenomena of strong interactions, the latter leads to a unified description of electromagnetism and of weak interactions. The inclusion of the classical Einstein theory of gravity completes the set of established basic knowledge. The standard model is in agreement with essentially all of the experimental information which is very rich by now. The recent discovery of the charged and neutral intermediate vector bosons of weak interactions at the expected masses has closed a really important chapter of particle physics. Never before the prediction of new particles was so neat and quantitatively precise. Yet the experimental proof of the standard model is not completed. For example, the hints of experimental evidence for the top quark at a mass ∼ 40 GeV have not yet been firmly established. The Higgs sector of the theory has not been tested at all. Beyond the realm of pure QED, even remaining within the electro-weak sector, the level of quantitative precision in testing the standard model does not exceed 5% or so. Furthermore, the standard model does not look as the ultimate theory. To a closer inspection a large class of fundamental questions emerges and one finds that a host of crucial problems are left open by the standard model

Description of the CONTAIN input model for the Dodewaard nuclear power plant

International Nuclear Information System (INIS)

Velema, E.J.

1992-02-01

This report describes the ECN standard CONTAIN input model for the Dodewaard Nuclear Power Plant (NPP) that has been developed by ECN. This standard input model will serve as a basis for analyses of the phenomena which may occur inside the Dodewaard containment in the event of a postulated severe accident. Boundary conditions for specific containment analyses can easily be implemented in the input model. as a result ECN will be able to respond quickly on requests for analyses from the utilities of the authorities. The report also includes brief descriptions of the Dodewaard NPP and the CONTAIN computer program. (author). 7 refs.; 5 figs.; 3 tabs

Description of card input data and formats for the International Bulletin on Atomic and Molecular Data for Fusion

International Nuclear Information System (INIS)

Katsonis, K.; Smith, F.J.

1979-05-01

This document describes the input data and the corresponding format of the computer programme which is used by the Atomic and Molecular Unit of the IAEA for storing, compiling and retrieving numerical data and/or bibliographic information for publishing the International Bulletin on Atomic and Molecular Data for Fusion

Integrated Project Management System description

International Nuclear Information System (INIS)

1987-03-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office (''Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs

Beyond the standard Higgs after the 125 GeV Higgs discovery.

Science.gov (United States)

Grojean, C

2015-01-13

An elementary weakly coupled and solitary Higgs boson allows one to extend the validity of the Standard Model up to very high energy, maybe as high as the Planck scale. Nonetheless, this scenario fails to fill the universe with dark matter and does not explain the matter-antimatter asymmetry. However, amending the Standard Model tends to destabilize the weak scale by large quantum corrections to the Higgs potential. New degrees of freedom, new forces, new organizing principles are required to provide a consistent and natural description of physics beyond the standard Higgs.

Standard biological parts knowledgebase.

Directory of Open Access Journals (Sweden)

Michal Galdzicki

2011-02-01

Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

Standard Biological Parts Knowledgebase

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M.; Gennari, John H.

2011-01-01

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate “promoter” parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible. PMID:21390321

Standard biological parts knowledgebase.

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

2011-02-24

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

40 CFR 428.60 - Applicability; description of the medium-sized general molded, extruded, and fabricated rubber...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the medium-sized general molded, extruded, and fabricated rubber plants subcategory. 428.60 Section 428.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS...

21 CFR 130.10 - Requirements for foods named by use of a nutrient content claim and a standardized term.

Science.gov (United States)

2010-04-01

... standardized term. (a) Description. The foods prescribed by this general definition and standard of identity... of identity but that do not comply with the standard of identity because of a deviation that is.... Deviations from noningredient provisions of the standard of identity (e.g., moisture content, food solids...

From Standards to Standard Practice: A Critical Look at the Perceptions and Process of Integrating the Next Generation Science Standards in the Nation's Schools

Science.gov (United States)

Mercadante, Katie Lynn

The Next Generation Science Standards (NGSS) are the culmination of reform efforts spanning more than three decades and are the first major reform movement in science education since Sputnik. When implementing these new standards, teachers are faced with many barriers. NGSS requires critical thinking, cross-curricular learning, and key changes in teaching, learning, and assessment. Implementation nationwide has been slow, due to sweeping changes, and controversial content within the standards. Resistance to implementation occurs in nearly all levels for these reasons. The purpose of this descriptive study was to determine the perceptions of in-service teachers of the NGSS Framework, to identify barriers that inhibit implementation, and to identify commonalities among teachers who have successfully implemented the Framework, as well as assist others who may do the same in the future. Teachers from public, private, and charter schools from across the United States participated in the study. Based upon teacher response, a three-stage action plan and series of necessary recommendations were developed to assist teachers and administrators in K-12 schools to develop plans to implement the NGSS.

The chemical component dictionary: complete descriptions of constituent molecules in experimentally determined 3D macromolecules in the Protein Data Bank

OpenAIRE

Westbrook, John D.; Shao, Chenghua; Feng, Zukang; Zhuravleva, Marina; Velankar, Sameer; Young, Jasmine

2014-01-01

Summary: The Chemical Component Dictionary (CCD) is a chemical reference data resource that describes all residue and small molecule components found in Protein Data Bank (PDB) entries. The CCD contains detailed chemical descriptions for standard and modified amino acids/nucleotides, small molecule ligands and solvent molecules. Each chemical definition includes descriptions of chemical properties such as stereochemical assignments, chemical descriptors, systematic chemical names and idealize...

Methodological fragments for the planning and decision making related to library utomation projects

Directory of Open Access Journals (Sweden)

Wanda Maria Maia da Rocha Paranhos

2004-01-01

Full Text Available Library automation processes depend in part in taking decisions on aspects of information and communications technologies (ICTs such as operational software, application software, data base management systems, hardware and communication network. The process depend also on decisions taken on Library Science aspects, specially in relation to the creation and management of bibliographic data which support services provision, such as the funcionalities included in applications software and how software implement desirable standards. The more important standards are AACR2, MARC/XML, ISO2709 and z39.50 communication protocol. Commitment to those standards tend to impact favorably on projects final costs. The cost of construction bibliographic data base may be the more expensive element item in the whole project; that can be minimized with use of cited standards and free bibliographic information available in Internet. The bigger the library holding, the more expressive the economy on this item with this methodology, which allows for full observation of local guidelines for the database construction. A synthetic list of the variety of product solutions available in Brazil is presented appended to the article, as well as an example of a basic request list of items to observe or evaluate in integrated library systems.

Correlation of Descriptive Analysis and Instrumental Puncture Testing of Watermelon Cultivars.

Science.gov (United States)

Shiu, J W; Slaughter, D C; Boyden, L E; Barrett, D M

2016-06-01

The textural properties of 5 seedless watermelon cultivars were assessed by descriptive analysis and the standard puncture test using a hollow probe with increased shearing properties. The use of descriptive analysis methodology was an effective means of quantifying watermelon sensory texture profiles for characterizing specific cultivars' characteristics. Of the 10 cultivars screened, 71% of the variation in the sensory attributes was measured using the 1st 2 principal components. Pairwise correlation of the hollow puncture probe and sensory parameters determined that initial slope, maximum force, and work after maximum force measurements all correlated well to the sensory attributes crisp and firm. These findings confirm that maximum force correlates well with not only firmness in watermelon, but crispness as well. The initial slope parameter also captures the sensory crispness of watermelon, but is not as practical to measure in the field as maximum force. The work after maximum force parameter is thought to reflect cellular arrangement and membrane integrity that in turn impact sensory firmness and crispness. Watermelon cultivar types were correctly predicted by puncture test measurements in heart tissue 87% of the time, although descriptive analysis was correct 54% of the time. © 2016 Institute of Food Technologists®

Efficient generation of connectivity in neuronal networks from simulator-independent descriptions

Directory of Open Access Journals (Sweden)

Mikael eDjurfeldt

2014-04-01

Full Text Available Simulator-independent descriptions of connectivity in neuronal networks promise greater ease of model sharing, improved reproducibility of simulation results, and reduced programming effort for computational neuroscientists. However, until now, enabling the use of such descriptions in a given simulator in a computationally efficient way has entailed considerable work for simulator developers, which must be repeated for each new connectivity-generating library that is developed.We have developed a generic connection generator interface that provides a standard way to connect a connectivity-generating library to a simulator, such that one library can easily be replaced by another, according to the modeller's needs. We have used the connection generator interface to connect C++ and Python implementations of the connection-set algebra to the NEST simulator. We also demonstrate how the simulator-independent modelling framework PyNN can transparently take advantage of this, passing a connection description through to the simulator layer for rapid processing in C++ where a simulator supports the connection generator interface and falling-back to slower iteration in Python otherwise. A set of benchmarks demonstrates the good performance of the interface.

Resumenes Analiticos en Education del 0001 al 0230 (Analytic Resumes in Education, from 0001 to 0230).

Science.gov (United States)

Scott, Patrick B., Ed.

1991-01-01

REDUC is a cooperative network of some 23 associated centers in 17 Latin American and Caribbean countries. The REDUC coordinating center is located in Santiago, Chile. REDUC produces a bibliographic database containing analytical summaries (approximately 800 items annually) of the most important research studies and project descriptions in the…

Using architectures for semantic interoperability to create journal clubs for emergency response

Energy Technology Data Exchange (ETDEWEB)

Powell, James E [Los Alamos National Laboratory; Collins, Linn M [Los Alamos National Laboratory; Martinez, Mark L B [Los Alamos National Laboratory

2009-01-01

In certain types of 'slow burn' emergencies, careful accumulation and evaluation of information can offer a crucial advantage. The SARS outbreak in the first decade of the 21st century was such an event, and ad hoc journal clubs played a critical role in assisting scientific and technical responders in identifying and developing various strategies for halting what could have become a dangerous pandemic. This research-in-progress paper describes a process for leveraging emerging semantic web and digital library architectures and standards to (1) create a focused collection of bibliographic metadata, (2) extract semantic information, (3) convert it to the Resource Description Framework /Extensible Markup Language (RDF/XML), and (4) integrate it so that scientific and technical responders can share and explore critical information in the collections.

Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort

Energy Technology Data Exchange (ETDEWEB)

1989-05-01

The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

How to find technical information. Pt. 2. Wie finde ich technische Informationen. T. 2. Elektrotechnik, Elektronik, Datenverarbeitung, Mess-, Steuerungs- und Reglungstechnik, Bauingenieurwesen, Architektur, Umweltschutz

Energy Technology Data Exchange (ETDEWEB)

Joswig, W

1981-01-01

This introduction into the finding and ordering of technical literature addresses both students and doctoral candidates as well as engineers which are already practising their profession. The first chapter - library science - gives a basic description of bibliographic research in an average scientific library: reading rooms and their function, structure of catalogues, structure of the reference library as well as lending and interlibrary lending methods. The technical information systems are described in detail. Finally, translation services and technical information and documentation centres are named. The second chapter - bibliographic research - lists the most important aids in finding technical references. Chapter three outlines the topical complex of scientific work. It provides information on how to organize written scientific publications in a formally correct way, how to quote and to list the references. Chapter four contains an index of terms from library and bibliographic science which is to help the beginner to understand the technical terms which cannot completely be excluded from this orientation aid.

[Wound information management system: a standardized scheme for acquisition, storage and management of wound information].

Science.gov (United States)

Liu, Hu; Su, Rong-jia; Wu, Min-jie; Zhang, Yi; Qiu, Xiang-jun; Feng, Jian-gang; Xie, Ting; Lu, Shu-liang

2012-06-01

To form a wound information management scheme with objectivity, standardization, and convenience by means of wound information management system. A wound information management system was set up with the acquisition terminal, the defined wound description, the data bank, and related softwares. The efficacy of this system was evaluated in clinical practice. The acquisition terminal was composed of the third generation mobile phone and the software. It was feasible to get access to the wound information, including description, image, and therapeutic plan from the data bank by mobile phone. During 4 months, a collection of a total of 232 wound treatment information was entered, and accordingly standardized data of 38 patients were formed automatically. This system can provide standardized wound information management by standardized techniques of acquisition, transmission, and storage of wound information. It can be used widely in hospitals, especially primary medical institutions. Data resource of the system makes it possible for epidemiological study with large sample size in future.

Executive overview and introduction to the SMAP information system life-cycle and documentation standards

Science.gov (United States)

1989-01-01

An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

La comercialización de libros de segunda: el caso del Centro Comercial del Libro y la Cultura de la ciudad de Medellín, Colombia

OpenAIRE

Minota Gómez, Leidy Johana

2015-01-01

The purpose of this article is to show a description of the marketing of secondhand books in Medellin: the case of Centro Comercial del Libro y la Cultura of Medellin. It contains some descriptions of their internal and external process, as well as the appreciation of its importance in the city. The methodology used in this article consisted in develop a bibliographical exploration of the subject and the open conversations with representative personalities of the respective sectors. Fr...

The Human Variome Project (HVP) 2009 Forum "Towards Establishing Standards".

Science.gov (United States)

Howard, Heather J; Horaitis, Ourania; Cotton, Richard G H; Vihinen, Mauno; Dalgleish, Raymond; Robinson, Peter; Brookes, Anthony J; Axton, Myles; Hoffmann, Robert; Tuffery-Giraud, Sylvie

2010-03-01

The May 2009 Human Variome Project (HVP) Forum "Towards Establishing Standards" was a round table discussion attended by delegates from groups representing international efforts aimed at standardizing several aspects of the HVP: mutation nomenclature, description and annotation, clinical ontology, means to better characterize unclassified variants (UVs), and methods to capture mutations from diagnostic laboratories for broader distribution to the medical genetics research community. Methods for researchers to receive credit for their effort at mutation detection were also discussed. (c) 2010 Wiley-Liss, Inc.

Simulation Experiment Description Markup Language (SED-ML Level 1 Version 3 (L1V3

Directory of Open Access Journals (Sweden)

Bergmann Frank T.

2018-03-01

Full Text Available The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML is an XML-based format that encodes, for a given simulation experiment, (i which models to use; (ii which modifications to apply to models before simulation; (iii which simulation procedures to run on each model; (iv how to post-process the data; and (v how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1 implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 3 (L1V3).

Science.gov (United States)

Bergmann, Frank T; Cooper, Jonathan; König, Matthias; Moraru, Ion; Nickerson, David; Le Novère, Nicolas; Olivier, Brett G; Sahle, Sven; Smith, Lucian; Waltemath, Dagmar

2018-03-19

The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML) describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML) is an XML-based format that encodes, for a given simulation experiment, (i) which models to use; (ii) which modifications to apply to models before simulation; (iii) which simulation procedures to run on each model; (iv) how to post-process the data; and (v) how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1) implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

Increasing Access to Archival Records in Library Online Public Access Catalogs.

Science.gov (United States)

Gilmore, Matthew B.

1988-01-01

Looks at the use of online public access catalogs, the utility of subject and call-number searching, and possible archival applications. The Wallace Archives at the Claremont Colleges is used as an example of the availability of bibliographic descriptions of multiformat archival materials through the library catalog. Sample records and searches…

The transfer voltage standard for calibration outside of a laboratory

Directory of Open Access Journals (Sweden)

Urekar Marjan

2017-01-01

Full Text Available The transfer voltage standard is designed for transferring the analog voltage from a calibrator to the process control workstation for multi-electrode electrolysis process in a plating plant. Transfer voltage standard is based on polypropylene capacitors and operational amplifiers with tera-ohm range input resistance needed for capacitor self-discharging effect cancellation. Dielectric absorption effect is described. An instrument for comparison of reference and control voltages is devised, based on precise window comparator. Detailed description of the main task is given, including constraints, theoretical and practical solutions. Procedure for usage of the standard outside of a laboratory conditions is explained. Comparison of expected and realized standard characteristics is given. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. TR-32019

Description logics of context

CSIR Research Space (South Africa)

Klarman, S

2013-05-01

Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

Field description of coarse bioclastic fabrics

Energy Technology Data Exchange (ETDEWEB)

Kidwell, S.M.; Holland, S.M. (Univ. of Chicago, IL (United States))

1991-08-01

Shell- and bone-bearing rocks can be readily categorized into 9 macroscopic fabric types using semi-quantitative scales for close-packing and size-sorting of bioclasts greater than 2 mm in diameter. Although designed to describe fossiliferous siliciclastics and volcaniclastics, this system of field description can also be used to enlarge upon standard petrographic descriptions of fossiliferous carbonates. In cross-sectional bed views, coarse bioclasts may be densely packed. These coarse bioclasts (>2 mm) may be well sorted (central 80% of bioclasts lie within 1 or 2 adjacent phi size-classes), bimodal (well sorted but with a distinct second mode), or poorly sorted (central 80% of bioclasts distributed over 3 or more adjacent size-classes). Despite the complicating effects of bioclast shape, novices show 90% accuracy in estimating close-packing from photographs. They have only 60% accuracy in estimating size-sorting (the most common error is underestimating goodness of sorting), underscoring the importance of size-tallies to cross-check visual estimates when first using this scheme. This packing/sorting approach provides a good visual image of the fabric, and narrows the range of possible modes of origin more than alternative criteria such as volumetric percent-abundance (which shows no one-to-one equivalence with close-packing), orientation, and fragmentation. However, detailed interpretations of fabrics usually require more information on these and other features of the deposit, including bioclast condition, associated sedimentary structures, life-habits of bioclast-producers, and stratigraphic context.

Telecommunications and Information-Systems Standardization--Is America Ready? CRS Report for Congress. Sci-Tech Alert. 87-458 SPR.

Science.gov (United States)

Hack, David

This report on telephone networks and computer networks in a global context focuses on the processes and organizations through which the standards that make this possible are set. The first of five major sections presents descriptions of the standardization process, including discussions of the various kinds of standards, advantages and…

INIS: Database manual

International Nuclear Information System (INIS)

2003-01-01

This document is one in a series of publications known as the INIS Reference Series. It is intended for users of INIS (International Nuclear Information System) output data on various media (FTP file, CD-ROM, e-mail file, earlier magnetic tape, cartridge, etc.). This manual provides a description of each data element including information on contents, structure and usage as well as historical overview of additions, deletions and changes of data elements and their contents that have taken place over the years. Each record contains certain control data fields (001-009), one, two or three bibliographic levels, a set of descriptors, and zero, one or more abstracts, one in English and optionally one or more in another language. In order to facilitate the description of the system, the sequence of data elements is based on the input or, as it is internally called, worksheet format which differs from the exchange format described in the manual IAEA-INIS-7. A separate section is devoted to each data element and deviations from the exchange format are indicated whenever present. As the Record Leader and the Directory are sufficiently explained in Chapter 3.1 of IAEA-INIS-7, the contents of this manual are limited to control fields and data fields; the detailed explanations are intended to supplement the basic information given in Chapter 3.2 of IAEA-INIS-7. Bibliographic levels are used to identify component parts of a publication, i.e. chapters in a book, articles in a journal issue, conference papers in a proceedings volume. All bibliographic levels contained in a record are given in a control data field. Each bibliographic level identifier appears in the subdirectory with a pointer to its position in the record

Dietary standards for school catering in France: serving moderate quantities to improve dietary quality without increasing the food-related cost of meals.

Science.gov (United States)

Vieux, Florent; Dubois, Christophe; Allegre, Laëtitia; Mandon, Lionel; Ciantar, Laurent; Darmon, Nicole

2013-01-01

To assess the impact on food-related cost of meals to fulfill the new compulsory dietary standards for primary schools in France. A descriptive study assessed the relationship between the level of compliance with the standards of observed school meals and their food-related cost. An analytical study assessed the cost of series of meals published in professional journals, and complying or not with new dietary standards. The costs were based on prices actually paid for food used to prepare school meals. Food-related cost of meals. Parametric and nonparametric tests from a total of 42 and 120 series of 20 meals in the analytical and descriptive studies, respectively. The descriptive study indicated that meeting the standards was not related to cost. The analytical study showed that fulfilling the frequency guidelines increased the cost, whereas fulfilling the portion sizes criteria decreased it. Series of meals fully respecting the standards (ie, frequency and portion sizes) cost significantly less (-0.10 €/meal) than series not fulfilling them, because the standards recommend smaller portion sizes. Introducing portion sizes rules in dietary standards for school catering may help increase dietary quality without increasing the food cost of meals. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Standardization of terminology in dermoscopy/dermatoscopy: Results of the third consensus conference of the International Society of Dermoscopy.

Science.gov (United States)

Kittler, Harald; Marghoob, Ashfaq A; Argenziano, Giuseppe; Carrera, Cristina; Curiel-Lewandrowski, Clara; Hofmann-Wellenhof, Rainer; Malvehy, Josep; Menzies, Scott; Puig, Susana; Rabinovitz, Harold; Stolz, Wilhelm; Saida, Toshiaki; Soyer, H Peter; Siegel, Eliot; Stoecker, William V; Scope, Alon; Tanaka, Masaru; Thomas, Luc; Tschandl, Philipp; Zalaudek, Iris; Halpern, Allan

2016-06-01

Evolving dermoscopic terminology motivated us to initiate a new consensus. We sought to establish a dictionary of standardized terms. We reviewed the medical literature, conducted a survey, and convened a discussion among experts. Two competitive terminologies exist, a more metaphoric terminology that includes numerous terms and a descriptive terminology based on 5 basic terms. In a survey among members of the International Society of Dermoscopy (IDS) 23.5% (n = 201) participants preferentially use descriptive terminology, 20.1% (n = 172) use metaphoric terminology, and 484 (56.5%) use both. More participants who had been initially trained by metaphoric terminology prefer using descriptive terminology than vice versa (9.7% vs 2.6%, P terminologies are suitable, that metaphoric terms need definitions, that synonyms should be avoided, and that the creation of new metaphoric terms should be discouraged. The expert panel proposed a dictionary of standardized terms taking account of metaphoric and descriptive terms. A consensus seeks a workable compromise but does not guarantee its implementation. The new consensus provides a revised framework of standardized terms to enhance the consistent use of dermoscopic terminology. Copyright © 2015 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Job Grading Standard for Machine Tool Operator, WG-3431.

Science.gov (United States)

Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

The standard covers nonsupervisory work involved in the set up, adjustment, and operation of conventional machine tools to perform machining operations in the manufacture and repair of castings, forgings, or parts from raw stock made of various metals, metal alloys, and other materials. A general description of the job at both the WG-8 and WG-9…

Evaluation Methodologies for Information Management Systems; Building Digital Tobacco Industry Document Libraries at the University of California, San Francisco Library/Center for Knowledge Management; Experiments with the IFLA Functional Requirements for Bibliographic Records (FRBR); Coming to Term: Designing the Texas Email Repository Model.

Science.gov (United States)

Morse, Emile L.; Schmidt, Heidi; Butter, Karen; Rider, Cynthia; Hickey, Thomas B.; O'Neill, Edward T.; Toves, Jenny; Green, Marlan; Soy, Sue; Gunn, Stan; Galloway, Patricia

2002-01-01

Includes four articles that discuss evaluation methods for information management systems under the Defense Advanced Research Projects Agency; building digital libraries at the University of California San Francisco's Tobacco Control Archives; IFLA's Functional Requirements for Bibliographic Records; and designing the Texas email repository model…

Interpreting the ASTM 'content standard for digital geospatial metadata'

Science.gov (United States)

Nebert, Douglas D.

1996-01-01

ASTM and the Federal Geographic Data Committee have developed a content standard for spatial metadata to facilitate documentation, discovery, and retrieval of digital spatial data using vendor-independent terminology. Spatial metadata elements are identifiable quality and content characteristics of a data set that can be tied to a geographic location or area. Several Office of Management and Budget Circulars and initiatives have been issued that specify improved cataloguing of and accessibility to federal data holdings. An Executive Order further requires the use of the metadata content standard to document digital spatial data sets. Collection and reporting of spatial metadata for field investigations performed for the federal government is an anticipated requirement. This paper provides an overview of the draft spatial metadata content standard and a description of how the standard could be applied to investigations collecting spatially-referenced field data.

ISAC's Gating-ML 2.0 data exchange standard for gating description.

Science.gov (United States)

Spidlen, Josef; Moore, Wayne; Brinkman, Ryan R

2015-07-01

The lack of software interoperability with respect to gating has traditionally been a bottleneck preventing the use of multiple analytical tools and reproducibility of flow cytometry data analysis by independent parties. To address this issue, ISAC developed Gating-ML, a computer file format to encode and interchange gates. Gating-ML 1.5 was adopted and published as an ISAC Candidate Recommendation in 2008. Feedback during the probationary period from implementors, including major commercial software companies, instrument vendors, and the wider community, has led to a streamlined Gating-ML 2.0. Gating-ML has been significantly simplified and therefore easier to support by software tools. To aid developers, free, open source reference implementations, compliance tests, and detailed examples are provided to stimulate further commercial adoption. ISAC has approved Gating-ML as a standard ready for deployment in the public domain and encourages its support within the community as it is at a mature stage of development having undergone extensive review and testing, under both theoretical and practical conditions. © 2015 International Society for Advancement of Cytometry.

A Method for Transforming Existing Web Service Descriptions into an Enhanced Semantic Web Service Framework

Science.gov (United States)

Du, Xiaofeng; Song, William; Munro, Malcolm

Web Services as a new distributed system technology has been widely adopted by industries in the areas, such as enterprise application integration (EAI), business process management (BPM), and virtual organisation (VO). However, lack of semantics in the current Web Service standards has been a major barrier in service discovery and composition. In this chapter, we propose an enhanced context-based semantic service description framework (CbSSDF+) that tackles the problem and improves the flexibility of service discovery and the correctness of generated composite services. We also provide an agile transformation method to demonstrate how the various formats of Web Service descriptions on the Web can be managed and renovated step by step into CbSSDF+ based service description without large amount of engineering work. At the end of the chapter, we evaluate the applicability of the transformation method and the effectiveness of CbSSDF+ through a series of experiments.

Influence of surface finish on fatigue properties of metallic materials: a bibliographic study

International Nuclear Information System (INIS)

Akamatsu, M.

1997-01-01

The investigation of a fatigue failed component very often shows that cracks initiated at the surface. It is actually well known that the surface finish notably influences the fatigue strength of a component. We have carried out a bibliographic study in order to clarify the influence of the different surface parameters. The analysis of the literature has shown that most of the data concerns high cycle fatigue. Three aspects of the surface finish have been examined: geometry (roughness), residual stresses and microstructure. In a general way, the influence of geometrical surface finish is tackled either empirically, with a factor assessing the fatigue limit decrease when the roughness and the tensile strength increase, or theoretically, with approaches modelling geometrical irregularities as notches or cracks. In all cases, the effect of roughness on fatigue strength depends on the material, through mechanical properties or microstructural features. The theoretical approaches seem particularly interesting, but their use is not straightforward and requires further development. The creation of residual stresses at the surface of a component can just as well reduce as improve its fatigue strength. In a first approach, these stresses can be regarded as a mean service stress. In fact, mechanical and metallurgical gradients near the surface have to be taken into account, which affect the relaxation of residual stresses during fatigue cycling. Actually, the effect of residual stresses can hardly be isolated, because these stresses are associated with geometrical and microstructural modifications. Microstructural features (metallurgical structure, grain size, inclusions, strain hardening) have an undoubted influence on fatigue strength, but the quantification of the effects remains tricky. The influence of the microstructure of surface layers on fatigue strength generally depends on the mechanical properties of materials. In short, fatigue strength predictions through a

A Bibliographic Study of Drug Abuse Research during last 30 years in Iran

Directory of Open Access Journals (Sweden)

Afarin Rahimi Movaghar

2009-05-01

Full Text Available In the last decades, the produced science has been significantly increased in the field of drug abuse, globally. The objective of this study was to assess the bibliographic aspects of the science produced in Iran on drug abuse in the last 30 years. All scientific papers published from Iran in a 30-year period (1973-2002 in national as well as international scientific journals were assessed for this study. These papers are indexed in the database for Iranian Mental Health Researches, called IranPsych. The total number of 218 papers on drug and drug abuse were found and assessed by six psychiatrists and psychologists with good inter-rater reliability. About half of these papers were published in the last two years. About half of the papers have been published in the Persian medical journals. One-third have been published in international journals. Overall, 449 authors contributed to the 218 published papers from whom 80 percent had only one paper. Half of the papers were written by only 15 authors (3.3 percent. Most of the authors were Medical Doctors and from Medical Universities. None of the researches was received financial support from pharmacologic industries. This study shows that in recent years, the increase in the publication of the researches conducted on drug abuse has been significant. Nevertheless, according to the high prevalence of drug abuse problem in Iran and improvements in the scientific, as well as executive structures, the whole scientific output is insignificant. The findings guide us to a more systematic approach toward training of researchers and promotion of resaerch in this area. Moreover, more active involvement of social scientists and publication of their research findings are recommended.

On Resource Description Capabilities of On-Board Tools for Resource Management in Cloud Networking and NFV Infrastructures

OpenAIRE

Tutschku, Kurt; Ahmadi Mehri, Vida; Carlsson, Anders; Chivukula, Krishna Varaynya; Johan, Christenson

2016-01-01

The rapid adoption of networks that are based on "cloudification" and Network Function Virtualisation (NFV) comes from the anticipated high cost savings of up to 70% in their build and operation. The high savings are founded in the use of general standard servers, instead of single-purpose hardware, and by efficiency resource sharing through virtualisation concepts. In this paper, we discuss the capabilities of resource description of "on-board" tools, i.e. using standard Linux commands, to e...

The primary exposure standard for Co-60 gamma radiation: characteristics and measurements procedures

International Nuclear Information System (INIS)

Laitano, R.F.; Toni, M.P.

1983-01-01

A description is given of a cavity ionization chamber used, as a primary exposure standard, at the Laboratorio di Metrologia delle Radiazioni Ionizzanti of the ENEA in Italy. The primary standard is designed to make absolute measurements of exposure due to the Co-60 gamma radiation. The procedures for the realizationof the exposure unit are also described. Finally results of some international comparisons are reported

General conditions for the existence of non-standard Lagrangians for dissipative dynamical systems

International Nuclear Information System (INIS)

Musielak, Z.E.

2009-01-01

Equations of motion describing dissipative dynamical systems with coefficients varying either in time or in space are considered. To identify the equations that admit a Lagrangian description, two classes of non-standard Lagrangians are introduced and general conditions required for the existence of these Lagrangians are determined. The conditions are used to obtain some non-standard Lagrangians and derive equations of motion resulting from these Lagrangians.

Safety standards and safety record of nuclear power plants

International Nuclear Information System (INIS)

Davis, A.B.

1984-01-01

This paper focuses on the use of standards and the measurement and enforcement of these standards to achieve safe operation of nuclear power plants. Since a discussion of the safety standards that the Nuclear Regulatory Commission (NRC) uses to regulate the nuclear power industry can be a rather tedious subject, this discussion will provide you with not only a description of what safety standards are, but some examples of their application, and various indicators that provide an overall perspective on safety. These remarks are confined to the safety standards adopted by the NRC. There are other agencies such as the Environmental Protection Agency, the Occupational Safety and Health Administration, and the state regulatory agencies which impact on a nuclear power plant. The NRC has regulatory authority for the commercial use of the nuclear materials and facilities which are defined in the Atomic Energy Act of 1954 to assure that the public health and safety and national security are protected

Inadequate description of educational interventions in ongoing randomized controlled trials

Directory of Open Access Journals (Sweden)

Pino Cécile

2012-05-01

Full Text Available Abstract Background The registration of clinical trials has been promoted to prevent publication bias and increase research transparency. Despite general agreement about the minimum amount of information needed for trial registration, we lack clear guidance on descriptions of non-pharmacologic interventions in trial registries. We aimed to evaluate the quality of registry descriptions of non-pharmacologic interventions assessed in ongoing randomized controlled trials (RCTs of patient education. Methods On 6 May 2009, we searched for all ongoing RCTs registered in the 10 trial registries accessible through the World Health Organization International Clinical Trials Registry Platform. We included trials evaluating an educational intervention (that is, designed to teach or train patients about their own health and dedicated to participants, their family members or home caregivers. We used a standardized data extraction form to collect data related to the description of the experimental intervention, the centers, and the caregivers. Results We selected 268 of 642 potentially eligible studies and appraised a random sample of 150 records. All selected trials were registered in 4 registers, mainly ClinicalTrials.gov (61%. The median [interquartile range] target sample size was 205 [100 to 400] patients. The comparator was mainly usual care (47% or active treatment (47%. A minority of records (17%, 95% CI 11 to 23% reported an overall adequate description of the intervention (that is, description that reported the content, mode of delivery, number, frequency, duration of sessions and overall duration of the intervention. Further, for most reports (59%, important information about the content of the intervention was missing. The description of the mode of delivery of the intervention was reported for 52% of studies, the number of sessions for 74%, the frequency of sessions for 58%, the duration of each session for 45% and the overall duration for 63

An Ontology for Description of Drug Discovery Investigations

Directory of Open Access Journals (Sweden)

Qi Da

2010-12-01

Full Text Available The paper presents an ontology for the description of Drug Discovery Investigation (DDI. This has been developed through the use of a Robot Scientist “Eve”, and in consultation with industry. DDI aims to define the principle entities and the relations in the research and development phase of the drug discovery pipeline. DDI is highly transferable and extendable due to its adherence to accepted standards, and compliance with existing ontology resources. This enables DDI to be integrated with such related ontologies as the Vaccine Ontology, the Advancing Clinico-Genomic Trials on Cancer Master Ontology, etc. DDI is available at http://purl.org/ddi/wikipedia or http://purl.org/ddi/home

ARM Data File Standards Version: 1.0

Energy Technology Data Exchange (ETDEWEB)

Kehoe, Kenneth [University of Oklahoma; Beus, Sherman [Pacific Northwest National Laboratory; Cialella, Alice [Brookhaven National Laboratory; Collis, Scott [Argonne National Laboratory; Ermold, Brian [Pacific Northwest National Laboratory; Perez, Robin [State University of New York, Albany; Shamblin, Stefanie [Oak Ridge National Laboratory; Sivaraman, Chitra [Pacific Northwest National Laboratory; Jensen, Mike [Brookhaven National Laboratory; McCord, Raymond [Oak Ridge National Laboratory; McCoy, Renata [Sandia National Laboratories; Moore, Sean [Alliant Techsystems, Inc.; Monroe, Justin [University of Oklahoma; Perkins, Brad [Los Alamos National Laboratory; Shippert, Tim [Pacific Northwest National Laboratory

2014-04-01

The Atmospheric Radiation Measurement (ARM) Climate Research Facility performs routine in situ and remote-sensing observations to provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes. The result is a diverse data sets containing observational and derived data, currently accumulating at a rate of 30 TB of data and 150,000 different files per month (http://www.archive.arm.gov/stats/storage2.html). Continuing the current processing while scaling this to even larger sizes is extremely important to the ARM Facility and requires consistent metadata and data standards. The standards described in this document will enable development of automated analysis and discovery tools for the ever-growing volumes of data. It also will enable consistent analysis of the multiyear data, allow for development of automated monitoring and data health status tools, and facilitate development of future capabilities for delivering data on demand that can be tailored explicitly to user needs. This analysis ability will only be possible if the data follows a minimum set of standards. This document proposes a hierarchy that includes required and recommended standards.

VizieR Online Data Catalog: Bidelman-Parsons Spectroscopic/Bibliographic Cat (Parsons+ 1980)

Science.gov (United States)

Parsons, S. B.; Buta, N. S.; Bidelman, W. P.

1996-11-01

The Bidelman-Parsons Spectroscopic and Bibliographical Catalog (BPSB; Parsons, Buta, and Bidelman 1980a, b) contains data compiled from the astronomical literature by W. P. Bidelman. These data include diverse catalogs and lists, especially from pre-1950 journals (minor as well as major), and from pre-1962 observatory publications. From more recent years, the data on any object frequently are limited to one item with a reference; for example, a spectral type. No data published after 1973 are included. Over 200 publications are represented. The BPSB has information on 40,312 objects. The catalog contains most of the same information on MK spectral types as the Catalogue of Stellar Spectra Classified in the Morgan-Keenan System (Jaschek, Conde, and de Sierra 1964) and its updates, but it also includes such items as spectral types without a luminosity class (certainly better than nothing); spectroscopic absolute magnitudes; notes on multiplicity; notes on high proper motion or radial velocity (with the values, if probably variable, or if greater than 60 km/s); unpublished remarks and spectral types from several sources, including Bidelman and Henize; and Bidelman's preliminary identifications of many sources in the Two-Micron Sky Survey (Neugebauer and Leighton 1969). Some of the longer lists included in the catalog are those of OB stars from the Tonantzintla-Tacubaya and Heidelberg-Koenigstuhl surveys (Iriarte and Chavira 1957; Chavira 1958; Klare and Szeidl 1966); that of OB stars with emission from the Case-Hamburg surveys (Hardorp et al. 1959; Stock, Nassau, and Stephenson 1960; Hardorp, Theile, and Voigt 1964; Nassau and Stephenson 1963; Hardorp, Theile, and Voigt 1965; Nassau, Stephenson, and MacConnell 1965; Stephenson and Sanduleak 1971); and stars from the General Catalogue of Variable Stars (Kukarkin et al. 1969); and the Catalogue of Suspected Variable Stars (Kukarkin et al. 1951, 1965). Although the catalog is mainly of stellar data, it includes many

Description of oral motoric disorders in 2-4 years old children

Directory of Open Access Journals (Sweden)

Rossa Ayu Sabilah

2016-07-01

Full Text Available Introduction: Oral motor disorders, such as speech and swallowing disorders, often occur in children. Generally parents complain that children refuse to eat hard food, drooling excess, and unable to speak clearly. Oral motor disturbance can occur due to the unavailability of maturation of oral motor structure. This study was aimed to determine the description of oral motor disturbance in children aged 2-4 years in some Integrated Health Service (Posyandu in Bandung. Methods: Descriptive research with cross sectional design. The study was conducted on 100 parents who came to six posyandu in Bandung by using questionnaires through guided interviews by researchers. Samples were taken using multistage random sampling technique. The results will be presented in tabular form and assessed using Arikunto standard criteria. Results: The results showed a low percentage in oral motor disturbances. Indicators of oral motor disturbance in children aged 2 - 4 years included in either category. As for children who have oral motor disorders exhibit various manifestations. Conclusion: The description of oral motor disorders in children aged 2 - 4 years in Posyandu in Bandung was shown by various manifestations. Based on the number of populations taken, oral motor disorders in children aged 2-4 years included into either category.

[Transsexuality--standards of care].

Science.gov (United States)

Eicher, W

1995-01-01

After the description of transsexualism as a nosological entity by Harry Benjamin standards of care emerged which are useful and protective for patients and doctors involved in treatment. The diagnosis is established by the finding of an irreversibly transposed gender identity. This has to be confirmed by an expert who is competent in counselling gender identity problems. He will give his written opinion which is the indication for the hormonal treatment to be done at least for half a year prior to operation and which leads to virilization or effeminization and which is the preparation for genital surgery. Standards of female-to-male surgery are: 1. Breast-transformation 2. Colpohysterectomy with adnexectomy, possibly by the vaginal route. Surrogates for testes and phalloplasties are only in the experimental stage and not standard. Standards of male-to-female surgery are: 1. Castration by extirpation of testes. 2. Resection of penis shaft with total resection of the spongy bodies. 3. Neovagina by inverted penis-skin technique. 4. Plasty of labia majora and minora and a clitoris. 5. In case of insufficient gynecomastia breast-augmentation. After the operation, follow-up examinations are necessary by the surgeon until complete healing. A supportive psychological care by the expert who has evaluated the transposition of gender identity would be useful. It could be done also by the gynecologist who makes the follow-up examinations in male to female transsexuals. He is also competent for the life-long hormonal substitution.

Selected review of regulatory standards and licensing issues for nuclear power plants

International Nuclear Information System (INIS)

Stevenson, J.D.; Thomas, F.A.

1982-11-01

This report presents a compilation and description of current foreign regulatory standards and licensing issues in the areas of interest associated with Siting, Structural Engineering, Metallurgy and Materials, and Mechanical Engineering. In addition, summary comparisons of the requirements of both the US and foreign nuclear power plant regulatory standards are provided. The selected foreign countries surveyed include Canada, France, Japan, Sweden, United Kingdom of Great Britain and Northern Ireland, and the Federal Republic of Germany

Computerized integrated data base production system (COMPINDAS)

International Nuclear Information System (INIS)

Marek, D.; Buerk, K.

1990-05-01

Based on many years of experience, and with the main objective in mind to guarantee long-term database quality and efficiency of input processes, Fachinformationszentrum Karlsruhe is developing an integrated interactive data management systems for bibliographic and factual databases. Its concept includes the following range of applications: Subject analysis with computer-assisted classification, indexing and translation; technical procedures with online acquisition and management of literature and factual data, recording by means of optical scanning, computer-assisted bibliographic description, control and update procedures; support of the whole process by continuous surveillance of document flow. All these procedures will be performed in an integrated manner. They system is to meet high standards for flexibility, data integrity and effectiveness of system functions. Independent of the type of data, the appropriate database or the subject field to be handled, all data will be stored in one large pool. One main goal is to avoid duplication of work and redundancy of data storage. The system will work online, interactive and conversational. COMPINDAS is being established on the basis of the ADABAS as database management system for storage and retrieval. The applications are being generated by means of aDis of ASTEC in Munich. aDis is used for the definition of the data structures, checking routines, coupling processes, and the design of dialogue and batch routines including masks. (author). 7 figs

Computerized integrated data base production system (COMPINDAS)

Energy Technology Data Exchange (ETDEWEB)

Marek, D; Buerk, K [Fachinformationszentrum Karlsruhe, Gesellschaft fuer Wissenschaftlich-Technische Information mbH, Eggenstein-Leopoldshafen (Germany)

1990-05-01

Based on many years of experience, and with the main objective in mind to guarantee long-term database quality and efficiency of input processes, Fachinformationszentrum Karlsruhe is developing an integrated interactive data management systems for bibliographic and factual databases. Its concept includes the following range of applications: Subject analysis with computer-assisted classification, indexing and translation; technical procedures with online acquisition and management of literature and factual data, recording by means of optical scanning, computer-assisted bibliographic description, control and update procedures; support of the whole process by continuous surveillance of document flow. All these procedures will be performed in an integrated manner. They system is to meet high standards for flexibility, data integrity and effectiveness of system functions. Independent of the type of data, the appropriate database or the subject field to be handled, all data will be stored in one large pool. One main goal is to avoid duplication of work and redundancy of data storage. The system will work online, interactive and conversational. COMPINDAS is being established on the basis of the ADABAS as database management system for storage and retrieval. The applications are being generated by means of aDis of ASTEC in Munich. aDis is used for the definition of the data structures, checking routines, coupling processes, and the design of dialogue and batch routines including masks. (author). 7 figs.

Physics 3204. Course Description.

Science.gov (United States)

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

Towards Uniform Accelerometry Analysis: A Standardization Methodology to Minimize Measurement Bias Due to Systematic Accelerometer Wear-Time Variation

Directory of Open Access Journals (Sweden)

Tarun R. Katapally, Nazeem Muhajarine

2014-06-01

Full Text Available Accelerometers are predominantly used to objectively measure the entire range of activity intensities – sedentary behaviour (SED, light physical activity (LPA and moderate to vigorous physical activity (MVPA. However, studies consistently report results without accounting for systematic accelerometer wear-time variation (within and between participants, jeopardizing the validity of these results. This study describes the development of a standardization methodology to understand and minimize measurement bias due to wear-time variation. Accelerometry is generally conducted over seven consecutive days, with participants' data being commonly considered 'valid' only if wear-time is at least 10 hours/day. However, even within ‘valid’ data, there could be systematic wear-time variation. To explore this variation, accelerometer data of Smart Cities, Healthy Kids study (www.smartcitieshealthykids.com were analyzed descriptively and with repeated measures multivariate analysis of variance (MANOVA. Subsequently, a standardization method was developed, where case-specific observed wear-time is controlled to an analyst specified time period. Next, case-specific accelerometer data are interpolated to this controlled wear-time to produce standardized variables. To understand discrepancies owing to wear-time variation, all analyses were conducted pre- and post-standardization. Descriptive analyses revealed systematic wear-time variation, both between and within participants. Pre- and post-standardized descriptive analyses of SED, LPA and MVPA revealed a persistent and often significant trend of wear-time’s influence on activity. SED was consistently higher on weekdays before standardization; however, this trend was reversed post-standardization. Even though MVPA was significantly higher on weekdays both pre- and post-standardization, the magnitude of this difference decreased post-standardization. Multivariable analyses with standardized SED, LPA and

40 CFR 424.40 - Applicability; description of the covered calcium carbide furnaces with wet air pollution control...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the covered calcium carbide furnaces with wet air pollution control devices subcategory. 424.40 Section 424.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE...

Physics at the University of Lviv since the 17th century until the second world war: Addenda to the bibliography

Directory of Open Access Journals (Sweden)

Andrij Rovenchak

2016-11-01

Full Text Available Previously, an attempt was made to compile in a series of papers a complete bibliography of works related to physics at the University of Lviv. The period since the foundation of the University in 1661 until the division of the Chair of Physics in 1872 was discussed by Rovenchak (2014. Special attention was paid to the development of theoretical physics, starting from the first professor, Oskar Fabian (Rovenchak 2009, followed by the famous physicist Marian Smoluchowski (Rovenchak 2012, and finally the Interbellum (Rovenchak 2013. The history of astronomy at the University of Lviv, albeit without a special bibliographic section, is presented by Novosyadlyj (2011 and Apunevych et al. (2011. The development of the experimental physics since 1872 still awaits a detailed study. The present paper will provide some additions to this bibliography: firstly with the descriptions of several missing early works from the 17th and 18th century and then, with a presentation of the activity of Wojciech Urbański. It is followed by a couple of works by Oskar Fabian and Marian Smoluchowski. Finally, minor complements to the bibliographic lists from the 1930s will be made, including popular newspaper articles. We strive to present the bibliographic description as completely as possible, in particular by avoiding abbreviations in names and titles, so that readers can extract any information of their interest. All items were examined de visu except for those marked with an asterisk (* after the number.

Standards establishment within Baja California’s horticultural sector

Directory of Open Access Journals (Sweden)

Belem Avendaño Ruiz

2010-01-01

Full Text Available The Baja California produce industry is notice by its strong export orientation production. Never less, in the past few years some products have been associated to food safety outbreaks in the United States, its main market, affecting its competitiveness and market share, driven produce growers to the adoption of standards as a mean to stay in the international market. The paper focus in the role of adoption of International standards in the firms as part of a competitive strategy that implies a technological change in order to comply with the certification requirements. A descriptive statistical analysis is conducted as well as a discriminate analysis in order to explain the factors that are involved in the firms that present technical innovation (adoption of standards to achieve competitiveness and those that don’t improve their productive process.

Bibliographic collection conservation of Manguinhos library, Oswaldo Cruz foundation: insect disinfection

Directory of Open Access Journals (Sweden)

Rejane Ramos Machado

2003-01-01

Full Text Available Report on the procedures against the rare books Coleoptera infestation at Manguinhos Library, Oswaldo Cruz Foundation, including anoxic treatment description, deep cleaning and physical re-organization of the collection. The objective of those procedures was to guarantee for future generation the preservation of that collection, which has great historical value, cause some books have their origin in the XVII Century and are part of the Library patrimony since the beginning of the XX Century.

Tests of the standard electroweak model in beta decay

Energy Technology Data Exchange (ETDEWEB)

Severijns, N.; Beck, M. [Universite Catholique de Louvain (UCL), Louvain-la-Neuve (Belgium); Naviliat-Cuncic, O. [Caen Univ., CNRS-ENSI, 14 (France). Lab. de Physique Corpusculaire

2006-05-15

We review the current status of precision measurements in allowed nuclear beta decay, including neutron decay, with emphasis on their potential to look for new physics beyond the standard electroweak model. The experimental results are interpreted in the framework of phenomenological model-independent descriptions of nuclear beta decay as well as in some specific extensions of the standard model. The values of the standard couplings and the constraints on the exotic couplings of the general beta decay Hamiltonian are updated. For the ratio between the axial and the vector couplings we obtain C{sub A},/C{sub V} = -1.26992(69) under the standard model assumptions. Particular attention is devoted to the discussion of the sensitivity and complementarity of different precision experiments in direct beta decay. The prospects and the impact of recent developments of precision tools and of high intensity low energy beams are also addressed. (author)

Tests of the standard electroweak model in beta decay

International Nuclear Information System (INIS)

Severijns, N.; Beck, M.; Naviliat-Cuncic, O.

2006-05-01

We review the current status of precision measurements in allowed nuclear beta decay, including neutron decay, with emphasis on their potential to look for new physics beyond the standard electroweak model. The experimental results are interpreted in the framework of phenomenological model-independent descriptions of nuclear beta decay as well as in some specific extensions of the standard model. The values of the standard couplings and the constraints on the exotic couplings of the general beta decay Hamiltonian are updated. For the ratio between the axial and the vector couplings we obtain C A ,/C V = -1.26992(69) under the standard model assumptions. Particular attention is devoted to the discussion of the sensitivity and complementarity of different precision experiments in direct beta decay. The prospects and the impact of recent developments of precision tools and of high intensity low energy beams are also addressed. (author)

49 CFR 571.223 - Standard No. 223; Rear impact guards.

Science.gov (United States)

2010-10-01

... frame rails of certain spacing and gauge of steel). (b) A description of the chassis surface to which... this standard is to reduce the number of deaths and serious injuries that occur when light duty... installation instructions in S5.5 of this section. Chassis means the load supporting frame structure of a motor...

Coarse-grained description of cosmic structure from Szekeres models

International Nuclear Information System (INIS)

Sussman, Roberto A.; Gaspar, I. Delgado; Hidalgo, Juan Carlos

2016-01-01

We show that the full dynamical freedom of the well known Szekeres models allows for the description of elaborated 3-dimensional networks of cold dark matter structures (over-densities and/or density voids) undergoing ''pancake'' collapse. By reducing Einstein's field equations to a set of evolution equations, which themselves reduce in the linear limit to evolution equations for linear perturbations, we determine the dynamics of such structures, with the spatial comoving location of each structure uniquely specified by standard early Universe initial conditions. By means of a representative example we examine in detail the density contrast, the Hubble flow and peculiar velocities of structures that evolved, from linear initial data at the last scattering surface, to fully non-linear 10–20 Mpc scale configurations today. To motivate further research, we provide a qualitative discussion on the connection of Szekeres models with linear perturbations and the pancake collapse of the Zeldovich approximation. This type of structure modelling provides a coarse grained—but fully relativistic non-linear and non-perturbative —description of evolving large scale cosmic structures before their virialisation, and as such it has an enormous potential for applications in cosmological research

ResearchEHR: use of semantic web technologies and archetypes for the description of EHRs.

Science.gov (United States)

Robles, Montserrat; Fernández-Breis, Jesualdo Tomás; Maldonado, Jose A; Moner, David; Martínez-Costa, Catalina; Bosca, Diego; Menárguez-Tortosa, Marcos

2010-01-01

In this paper, we present the ResearchEHR project. It focuses on the usability of Electronic Health Record (EHR) sources and EHR standards for building advanced clinical systems. The aim is to support healthcare professional, institutions and authorities by providing a set of generic methods and tools for the capture, standardization, integration, description and dissemination of health related information. ResearchEHR combines several tools to manage EHR at two different levels. The internal level that deals with the normalization and semantic upgrading of exiting EHR by using archetypes and the external level that uses Semantic Web technologies to specify clinical archetypes for advanced EHR architectures and systems.

A system for communication between a CDC 6000 and a PDP 11 computer

International Nuclear Information System (INIS)

Von Eicken, H.; Lee, J.G.; Piney, C.; Van Praag, A.

1976-01-01

A description is given of the hardware and software employed for the interchange of binary data between a PDP 11 and a CDC 6000 computer, for the bibliographic-data acquisition system of the CERN Library. The data is transmitted as buffers of 8-bit bytes with sequence and checksum verification. Initially tested under standard Intercom, the software was subsequently updated to communicate with CERN's programmable front-end concentrator Supermux. For this, a special interface was designed, providing full-duplex transmission and capable of distinguishing between the pure binary computer data and terminal-oriented system messages. The various stages in the development are briefly described and a more detailed account is given of the current system, particularly the discrimination between data and system messages and the use of DMA channels. A complete set of circuit diagrams is included. (author)

Generalizing: The descriptive struggle

Directory of Open Access Journals (Sweden)

Barney G. Glaser, Ph.D.; Hon Ph.D.

2006-11-01

Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

40 CFR 424.10 - Applicability; description of the open electric furnaces with wet air pollution control devices...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the open electric furnaces with wet air pollution control devices subcategory. 424.10 Section 424.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open...

Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

Science.gov (United States)

McBride, Bonnie J.; Gordon, Sanford

1996-01-01

This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

Leveraging Software Architectures through the ISO/IEC 42010 standard: A Feasibility Study

NARCIS (Netherlands)

Tamburri, D.A.; Lago, P.; Muccini, H.; Proper, E.; Lankhorst, M.; Schoenherr, M.

2011-01-01

The state of the practice in enterprise and software architecture learnt that relevant architectural aspects should be illustrated in multiple views, targeting the various concerns of different stakeholders. This has been expressed a.o. in the ISO/IEC 42010 Standard on architecture descriptions. In

Innovations in Setting Performance Standards for K-12 Test-Based Accountability

Science.gov (United States)

Huff, Kristen; Plake, Barbara S.

2010-01-01

Standard setting is a systematic process that uses a combination of judgmental and empirical procedures to make recommendations about where on the score continuum "cut scores" should be placed. Cut scores divide the score scale into categories consistent with the descriptions of student performance associated with multiple levels of achievement.…

History and development of ABCDEFG: a data standard for geosciences

Directory of Open Access Journals (Sweden)

M. Petersen

2018-01-01

Full Text Available Museums and their collections have specially customized databases in order to optimally gather and record their contents and associated metadata associated with their specimens. To share, exchange, and publish data, an appropriate data standard is essential. ABCD (Access to Biological Collection Data is a standard for biological collection units, including living and preserved specimen, together with field observation data. Its extension, EFG (Extension for Geoscience, enables sharing and publishing data related to paleontological, mineralogical, and petrological objects. The standard is very granular and allows detailed descriptions, including information about the collection event itself, the holding institution, stratigraphy, chemical analysis, and host rock. The standard extension was developed in 2006 and has been used since then by different initiatives and applied for the publication of collection-related data in domain-specific and interdisciplinary portals.

International performance-oriented packaging standards adopted in the united states

International Nuclear Information System (INIS)

McCall, D.L.

1993-01-01

On January 1, 1991, the U.S. Department of Transportation (DOT) initiated a transition to adopting a modified version of current international standards for packaging and transporting hazardous materials and hazardous wastes. This transition permits a 5-year phase-in period that will impact all phases of hazardous material transportation including material classification and description, packaging for shipment, and hazard communication standards. These changes are being enacted through the DOT Federal Docket HM-181, 'Performance-Oriented Packaging Standards.' These regulatory standards will have dramatic impact on nearly 5 billion tons of hazardous materials transported within the United States each year. This paper summarizes the principal elements of the new DOT regulations, the latest implementation schedule and impacts on U.S. shipping activities, and discusses outstanding issues that remain to be solved through the next 5 years. (author)

48 CFR 52.214-21 - Descriptive Literature.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

Uniform Title in Theory and in Slovenian and Croatian Cataloguing Practice

Directory of Open Access Journals (Sweden)

Marija Petek

2013-09-01

Full Text Available ABSTRACTPurpose:  The paper investigates the importance and development of uniform title that enables collocation in the library catalogue. Research results on use of uniform titles in two union catalogues, the Slovenian COBISS and the Croatian CROLIST are also presented.Methodology/approach:  Theoretical apects of the uniform title are treated: for the first time by Panizzi, then in the Paris Principles being the basis for the Verona's cataloguing code; in the latest International Cataloguing Principles including conceptual models Functional Requirements for Bibliographic Records (FRBR and Functional Requirements for Authority Data (FRAD; and last but not least in the international cataloguing code Resource Description and Access (RDA. To find out whether the uniform titles are used consistently according to the Verona's cataloguing code and to the requirements of the bibliographic formats COMARC and UNIMARC, the frequency of tags 300 and 500 in bibliographic records is explored.Results:  The research results indicate that the use of uniform titles in COBISS and CROLIST is not satisfactory and that the tags 300 and 500 are often missing in bibliographic recods. In online catalogues a special attention should be given to the uniform title as it is considered an efficient linking device in the catalogue and as it enables collocation.Research limitations:  The research is limited to bibliographic records for translations of works of personal authors and of anonymous works; corporate authors are not included.Originality/practical implications:  Presenting development of the uniform title from the very beginning up to now and the first research on the uniform title in COBISS.

Quantum field-theoretical description of neutrino and neutral kaon oscillations

Science.gov (United States)

Volobuev, Igor P.

2018-05-01

It is shown that the neutrino and neutral kaon oscillation processes can be consistently described in quantum field theory using only plane waves of the mass eigenstates of neutrinos and neutral kaons. To this end, the standard perturbative S-matrix formalism is modified so that it can be used for calculating the amplitudes of the processes passing at finite distances and finite time intervals. The distance-dependent and time-dependent parts of the amplitudes of the neutrino and neutral kaon oscillation processes are calculated and the results turn out to be in accordance with those of the standard quantum mechanical description of these processes based on the notion of neutrino flavor states and neutral kaon states with definite strangeness. However, the physical picture of the phenomena changes radically: now, there are no oscillations of flavor or definite strangeness states, but, instead of it, there is interference of amplitudes due to different virtual mass eigenstates.

Standard model parameters determination and validity tests in Z{sup 0} hadronic disintegrations; Determination des parametres du modele standard et tests de sa validite dans les desintegrations hadroniques du Z{sup 0}

Energy Technology Data Exchange (ETDEWEB)

Todorov, T

1993-05-01

This thesis describes the determination of the electroweak parameters from the measurements of the total hadronic cross-section by the DELPHI experiment at LEP-I. The analysed data was taken in the years 1991 and 1992; a previous analysis of the data taken in 1990 is included in the final fits. The first part of the thesis describes the interest of the measurement of the Z{sup 0} resonance parameters in the framework of the Standard Model as well as their implications for alternative models. The Standard Model predictions are described in some detail, and their precision is estimated. Then follows a brief description of the LEP collider, of the measurement of the collision energy, and of the experimental setup. A chapter is devoted to the description of the luminosity measurement, essential for the determination of total cross-sections. The measurement of the hadronic cross-section (event selection, study of backgrounds, study of sources of systematic uncertainties) is described in detail in the next chapter. Then follows a description of the method of the extraction of the resonance parameters, and a discussion of the uncertainties in their determination. The values obtained are interpreted in the framework of the Standard Model, as well as in the framework of some more general theories. Finally, the event generator for hadron production in two-photon collisions is described in the appendix. (author). 69 refs., 51 figs., 9 tabs., 1 ann.

NONLINEAR MODELS FOR DESCRIPTION OF CACAO FRUIT GROWTH WITH ASSUMPTION VIOLATIONS

Directory of Open Access Journals (Sweden)

JOEL AUGUSTO MUNIZ

2017-01-01

Full Text Available Cacao (Theobroma cacao L. is an important fruit in the Brazilian economy, which is mainly cultivated in the southern State of Bahia. The optimal stage for harvesting is a major factor for fruit quality and the knowledge on its growth curves can help, especially in identifying the ideal maturation stage for harvesting. Nonlinear regression models have been widely used for description of growth curves. However, several studies in this subject do not consider the residual analysis, the existence of a possible dependence between longitudinal observations, or the sample variance heterogeneity, compromising the modeling quality. The objective of this work was to compare the fit of nonlinear regression models, considering residual analysis and assumption violations, in the description of the cacao (clone Sial-105 fruit growth. The data evaluated were extracted from Brito and Silva (1983, who conducted the experiment in the Cacao Research Center, Ilheus, State of Bahia. The variables fruit length, diameter and volume as a function of fruit age were studied. The use of weighting and incorporation of residual dependencies was efficient, since the modeling became more consistent, improving the model fit. Considering the first-order autoregressive structure, when needed, leads to significant reduction in the residual standard deviation, making the estimates more reliable. The Logistic model was the most efficient for the description of the cacao fruit growth.

Olkiluoto site description 2006

International Nuclear Information System (INIS)

Andersson, J.; Ahokas, H.; Hudson, J.A.

2007-03-01

This second version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2004 (Posiva 2005) with the data and knowledge obtained up to December 2005. The main product of the modelling has been to develop a descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. For practical reasons, the Site Descriptive Model is divided into five parts: surface system, geology, rock mechanics, hydrogeology and hydrogeochemistry, which are presented in individual chapters. Four separated models are presented: the geological, rock mechanics, hydrogeological and hydrogeochemical models. The consistency between the hydrogeological and hydrogeochemical models is assessed in a joint chapter. Chapter 1 presents an outline of the report, explains the background to its development and sets out its objectives and scope. It is also introduces and explains the integrated modelling methodology, the nomenclature used in the descriptions of the models and the prediction/outcome studies. Chapter 2 provides a brief overview of the data used for producing the Site Description. Chapters 3 to 8 present the descriptive modelling, which involves interpreting data, interpolating or extrapolating between measurement points and calibrating the model against data, based on the various assumptions made about each conceptual model. Chapter 9 presents the results of the prediction/outcome studies performed during 2005 and Chapter 10 the overall consistency and confidence assessment. Overall conclusions are provided in Chapter 11. The main advances since Site Report 2004 are: A new geological model is presented in Chapter 4, representing a significant change from Bedrock Model 2003/1. There has been extensive use of geological data, whereas hydrogeological data have deliberately not been used and more

GOOD GOVERNANCE: NORMATIVE VS. DESCRIPTIVE DIMENSION

Directory of Open Access Journals (Sweden)

Ciprian IFTIMOAEI

2015-04-01

Full Text Available The concept of “good governance” was used for the first time in the 1989 World Bank Report – Sub-Saharan Africa: From Crisis to Sustainable Growth. A Long-Term Perspective Study – and has already made history in international studies, especially after the breakdown of the communist regimes. The governance has to do with authority, decision-making and accountability.The good governance is defined as the capacity of the government to manage a nation’s affaires, to provide economic development, welfare for citizens, and social protection for the poor. In this article,the concept of good governance is analysed according to two main dimensions: the normative dimension which comprises principles, values and norms that are guiding the international community and the governments in the management of policymaking process;the descriptive dimension which refers to the practical aspects of implementing the good governance’s standards as policies, programmes and structural reforms with the aim of solving or ameliorating the problems of developing countries.

An introduction to relativistic processes and the standard model of electroweak interactions

CERN Document Server

Becchi, Carlo Maria

2006-01-01

These notes are designed as a guide-line for a course in Elementary Particle Physics for undergraduate students. The purpose is providing a rigorous and self-contained presentation of the theoretical framework and of the phenomenological aspects of the physics of interactions among fundamental constituents of matter. The first part of the volume is devoted to the description of scattering processes in the context of relativistic quantum field theory. The use of the semi-classical approximation allows us to illustrate the relevant computation techniques in a reasonably small amount of space. Our approach to relativistic processes is original in many respects. The second part contains a detailed description of the construction of the standard model of electroweak interactions, with special attention to the mechanism of particle mass generation. The extension of the standard model to include neutrino masses is also described. We have included a number of detailed computations of cross sections and decay rates of...

Standardized gene nomenclature for the Brassica genus

Directory of Open Access Journals (Sweden)

King Graham J

2008-05-01

Full Text Available Abstract The genus Brassica (Brassicaceae, Brassiceae is closely related to the model plant Arabidopsis, and includes several important crop plants. Against the background of ongoing genome sequencing, and in line with efforts to standardize and simplify description of genetic entities, we propose a standard systematic gene nomenclature system for the Brassica genus. This is based upon concatenating abbreviated categories, where these are listed in descending order of significance from left to right (i.e. genus – species – genome – gene name – locus – allele. Indicative examples are provided, and the considerations and recommendations for use are discussed, including outlining the relationship with functionally well-characterized Arabidopsis orthologues. A Brassica Gene Registry has been established under the auspices of the Multinational Brassica Genome Project that will enable management of gene names within the research community, and includes provisional allocation of standard names to genes previously described in the literature or in sequence repositories. The proposed standardization of Brassica gene nomenclature has been distributed to editors of plant and genetics journals and curators of sequence repositories, so that it can be adopted universally.

ARM Data File Standards Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Palanisamy, Giri [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-05-01

The U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) Climate Research Facility performs routine in situ and remote-sensing observations to provide a detailed and accurate description of the Earth atmosphere in diverse climate regimes. The result is a huge archive of diverse data sets containing observational and derived data, currently accumulating at a rate of 30 terabytes (TB) of data and 150,000 different files per month (http://www.archive.arm.gov/stats/). Continuing the current processing while scaling this to even larger sizes is extremely important to the ARM Facility and requires consistent metadata and data standards. The standards described in this document will enable development of automated analysis and discovery tools for the ever growing data volumes. It will enable consistent analysis of the multiyear data, allow for development of automated monitoring and data health status tools, and allow future capabilities of delivering data on demand that can be tailored explicitly for the user needs. This analysis ability will only be possible if the data follows a minimum set of standards. This document proposes a hierarchy of required and recommended standards.

API and ISO standards can be combined

International Nuclear Information System (INIS)

Weightman, R.T.; Warnack, M.F.

1992-01-01

This paper reports that oil field equipment and product manufacturers can maintain a competitive advantage and minimize costs by integrating American Petroleum Institute (API) licensing programs with International Standards Organization (ISO) 9001 standards under one quality system. A combined quality system approach can position a company for quality system certification under ISO 9001 while maintaining API specifications. Furthermore, only one quality system manual is needed for API licensing and ISO certification, avoiding duplication of effort. The benefits of a documented quality program include the flowing: Job descriptions and personnel qualification requirements are documented; The improved documentation allows direct tracing of specific production activities; Laboratory test methods and calibration of test equipment follow accepted standards for more reliable and reproducible test data; Quality control becomes proactive, not reactive, through internal process controls previously not implemented; Employee attitudes improve through appreciation for the overall goals of the company; Ambiguous quality issues, such as documenting special customer requirements, are easily resolved; and The company image improves with customers, particularly for those that require API Specification Q1 or ISO 9001 compliance or those having their own quality performance standards

Standardization of radioactive gaseous waste radiation monitoring equipment from the International Electrotechnical Commission

International Nuclear Information System (INIS)

Fitoussi, L.

1983-01-01

After having introduced the works performed by the International Electrotechnical Commission, the authors report on the results of the studies carried out to achieve the standardization of the radiation monitoring equipment concerning the control of the gaseous waste from nuclear installations. The authors present the most interesting aspects of the regulations and recommendations, which include not only a description of the minimum permissible levels of sensitivity for the monitors, but also a description of the set of assays to be established in order to verify the level of performance of the monitors

Historical Experiments and Physics Teaching: adding considerations from a Bibliographic Review and the Cultural History of Science

Science.gov (United States)

Jardim, W. T.; Guerra, A.

2017-12-01

In this paper, a discussion about the purposes of historical experiments in science teaching found in the literature will be presented. As a starting point, we carried out a bibliographic review, on the websites of six relevant periodicals for the area of Science Teaching and, especially for Physics Teaching. The search was based, at first, on works published between the years 2001 and 2016, from terms like "historical experiments", "museums" and "experience". Thereon, due to the large number of publications found, a screening process was developed based on the analysis of titles, abstracts, keywords and, whether necessary, the whole text, aiming to identify which searches emphasize working with historical experiments in Physics teaching, from a theoretical perspective or based on manipulation of a replica of historical apparatus. The selected proposals were arranged in categories adapted from the work of Heering and Höttecke (2014) which allowed us to draw a parallel between the national and international publication that presented resembling scopes. Furthermore, the analysis of the results leads us to infer that, in general, extralab factors, inherent to science, when not neglected, are placed in a peripheral perspective. Thus, we draw theoretical considerations based on Historians of Science, which develop their researches based on the bias of the Cultural History of Science, seeking to add reflections to what has been developed about historical experiments in teaching up to now.

Guide to LIBXSIF, a Library for Parsing the Extended Standard Input Format of Accelerated Beamlines(LCC-0060)

International Nuclear Information System (INIS)

Tenenbaum, P

2003-01-01

We describe LIBXSIF, a standalone library for parsing the Extended Standard Input Format of accelerator beamlines. Included in the description are: documentation of user commands; full description of permitted accelerator elements and their attributes; the construction of beamline lists; the mechanics of adding LIBXSIF to an existing program; and ''under the hood'' details for users who wish to modify the library or are merely morbidly curious

Digital economy and non-standard work

Directory of Open Access Journals (Sweden)

Patrizia Tullini

2016-12-01

Full Text Available Public and scientific debate on the digital economy is now widespread in many european countries. Also labour law scholars started to pay more attention to the new economical models and to the impact of digital technologies on productive processes. Economics and labour sciences should now move from a descriptive analysis to a deeper theoretical elaboration.The directions of the theoretical analysis are essentially two: the first one deals with the overbearing diffusion of non-standard forms of work on the web, especially on the digital platforms. This trend undermines the traditional foundation of subordination and affects the dynamics of global labour law market. The second directions deals with the increasing use of artificial intelligence in the industrial environment that presents new legal and social issues, concerning both the replacement of standard work with robotics and the complementarity between human work and «non-human agents» work.

Description and characterization of the melanic morphotype of Rhodnius nasutus Stål, 1859 (Hemiptera: Reduviidae: Triatominae

Directory of Open Access Journals (Sweden)

Fernando Braga Stehling Dias

2014-10-01

Full Text Available Introduction For the first time we provide the description of the melanic (dark morphotype of Rhodnius nasutus and determine the pattern of genetic inheritance for this characteristic. Methods Dark morph R. nasutus specimens were crossbred with standard (typically patterned R. nasutus. Results We present the first occurrence of the melanic morphotype in the genus Rhodnius. The crossbreeding results demonstrate that the inheritance pattern of this characteristic follows Mendel's simple laws of segregation and an independent assortment of alleles. Conclusions Phenotypic variation of R. nasutus reinforces the heterogeneity found in the Triatominae. Descriptions of new species in this subfamily require rigorous validation criteria.

Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

International Nuclear Information System (INIS)

Goering, Markus Heinrich

2013-01-01

The utilisation of computer-based I and C, as a result of the technological advancements in the computer industry, represents an up-to-date challenge for I and C engineers in nuclear power plants throughout the world. In comparison with the time-proven, hard-wired I and C, the engineering must consider the novel characteristics of computer-based technology during the implementation, these are primarily constituted by higher performance and the utilisation of software. On one hand, this allows for implementing more complex I and C functions and integrating several I and C functions on to single components, although on the other hand, the minimisation of the CCF probability is of high priority to the engineering. Furthermore, the engineering must take the implementation of the deterministic safety concept for the I and C design into consideration. This includes engineering the redundancy, diversity, physical separation, and independence design features, and is complemented by the analysis of the I and C design with respect to the superposition of pre-defined event sequences and postulated failure combinations, so as to secure the safe operation of the nuclear power plant. The focus of this thesis is on the basic principles of engineering, i.e. description languages and methods, which the engineering relies on for a highly qualitative and efficient computer-based I and C implementation. The analysis of the deterministic safety concept and computer-based I and C characteristics yields the relevant technical requirements for the engineering, these are combined with the general structuring principles of standard IEC 81346 and the extended description language evaluation criteria, which are based on the guideline VDI/VDE-3681, resulting in target criteria for evaluating description languages. The analysis and comparison of existing description languages reveals that no description language satisfactorily fulfils all target criteria, which is constituted in the

Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

Energy Technology Data Exchange (ETDEWEB)

Goering, Markus Heinrich

2013-10-25

The utilisation of computer-based I and C, as a result of the technological advancements in the computer industry, represents an up-to-date challenge for I and C engineers in nuclear power plants throughout the world. In comparison with the time-proven, hard-wired I and C, the engineering must consider the novel characteristics of computer-based technology during the implementation, these are primarily constituted by higher performance and the utilisation of software. On one hand, this allows for implementing more complex I and C functions and integrating several I and C functions on to single components, although on the other hand, the minimisation of the CCF probability is of high priority to the engineering. Furthermore, the engineering must take the implementation of the deterministic safety concept for the I and C design into consideration. This includes engineering the redundancy, diversity, physical separation, and independence design features, and is complemented by the analysis of the I and C design with respect to the superposition of pre-defined event sequences and postulated failure combinations, so as to secure the safe operation of the nuclear power plant. The focus of this thesis is on the basic principles of engineering, i.e. description languages and methods, which the engineering relies on for a highly qualitative and efficient computer-based I and C implementation. The analysis of the deterministic safety concept and computer-based I and C characteristics yields the relevant technical requirements for the engineering, these are combined with the general structuring principles of standard IEC 81346 and the extended description language evaluation criteria, which are based on the guideline VDI/VDE-3681, resulting in target criteria for evaluating description languages. The analysis and comparison of existing description languages reveals that no description language satisfactorily fulfils all target criteria, which is constituted in the

Revised description of the fine structure of in situ "zooxanthellae" genus Symbiodinium.

Science.gov (United States)

Wakefield, T S; Farmer, M A; Kempf, S C

2000-08-01

The fine structure of the symbiotic dinoflagellate genus Symbiodinium has been well described. All of the published descriptions are based on tissue that was fixed in standard aldehyde and osmium fixatives and dehydrated in an ethanol series before embedding. When the technique of freeze-substitution was used to fix tissue from Cassiopeia xamachana, Aiptasia pallida, and Phyllactis flosculifera and prepare it for embedding, thecal vesicles were revealed within the in situ symbionts of all three species. Although these structures have been identified in cultured symbionts, they have never been described in the in situ symbionts. A review of the literature has revealed several instances where thecal vesicles were either overlooked or identified incorrectly. Thus the formal description of the genus Symbiodinium, which describes the in situ symbionts, contains information that is based on artifact and should be revised. A revision of the genus is suggested, and the true nature of these structures and their significance in the symbiotic association are discussed.

Report from the research committee of digital imaging standardization in nuclear medicine

International Nuclear Information System (INIS)

Nakamura, Yutaka; Ise, Toshihide; Isetani, Osamu; Ichihara, Takashi; Ohya, Nobuyoshi; Kanaya, Shinichi; Fukuda, Toshio; Horii, Hitoshi.

1994-01-01

Since digital scintillation camera systems were developed in 1982, digital imaging is rapidly replacing analog imaging. During the first year, the research committee of digital imaging standardization has collected and analyzed basic data concerning digital examination equipment systems, display equipments, films, and hardware and software techniques to determine items required for the standardization of digital imaging. During the second year, it has done basic phantom studies to assess digital images and analyzed the results from both physical and visual viewpoints. On the basis of the outcome of the research committee's activities and the nationwide survey, the draft of digital imaging standardization in nuclear medicine has been presented. In this paper. the analytical data of the two-year survey, made by the research committee of digital imaging standardization, are presented. The descriptions are given under the following four items: (1) standardization digital examination techniques, (2) standardization of display techniques, (3) the count and pixel of digital images, and (4) standardization of digital imaging techniques. (N.K.)

Effective description of general extensions of the Standard Model: the complete tree-level dictionary

Science.gov (United States)

de Blas, J.; Criado, J. C.; Pérez-Victoria, M.; Santiago, J.

2018-03-01

We compute all the tree-level contributions to the Wilson coefficients of the dimension-six Standard-Model effective theory in ultraviolet completions with general scalar, spinor and vector field content and arbitrary interactions. No assumption about the renormalizability of the high-energy theory is made. This provides a complete ultraviolet/infrared dictionary at the classical level, which can be used to study the low-energy implications of any model of interest, and also to look for explicit completions consistent with low-energy data.

A new compiler for the GANIL Data Acquisition description

International Nuclear Information System (INIS)

Saillant, F.; Raine, B.

1997-01-01

An important feature of the GANIL Data Acquisition System is the description of the experiments by means of a language developed at GANIL. The philosophy is to attribute to each element (parameters, spectra, etc) an operational name which will be used at any level of the system. This language references a library of modules to free the user from the technical details of the hardware. This compiler has been recently entirely re-developed using technologies as the object-oriented language (C++) and object-oriented software development method and tool. This enables us to provide a new functionality or to support a new electronic module within a very short delay and without any deep modification of the application. A new Dynamic Library of Modules has been also developed. Its complete description is available on the GANIL WEB site http://ganinfo.in2p3.fr/acquisition/homepage.html. This new compiler brings a lot of new functionalities, among which the most important is the notion of 'register' whatever the module standard is. All the registers described in the module provider's documentation can now be accessed by their names. Another important new feature is the notion of 'function' that can be executed on a module. Also a set of new instructions has been implemented to execute commands on CAMAC crates. Another possibility of this new compiler is to enable the description of specific interfaces with GANIL Data Acquisition System. This has been used to describe the coupling of the CHIMERA Data Acquisition System with the INDRA one through a shared memory in the VME crate. (authors)

NWTS conceptual reference repository description (CRRD). Volume 1. Summary

International Nuclear Information System (INIS)

1981-05-01

This report is a Conceptual Reference Repository Description (CRRD) for the terminal storage of spent, unreprocessed fuel assemblies and low-level transuranic waste. It is based on the following three previously prepared conceptual design reports: National Waste Terminal Storage in a Bedded Salt Formation for Spent Unreprocessed Fuel (NWTS-R2), prepared by Kaiser Engineers; National Waste Terminal Storage Repository Number 1 (NWTS-R1), prepared by Stearns-Roger; Spent Fuel Receiving and Packaging Facility Conceptual Design, prepared by Rockwell Hanford Operations and Kaiser Engineers. The CRRD is not itself a conceptual design report, but combines the key features of the above three reports into a description of a reference repository. This description is to be used as a basis for the preparation of a preliminary information report for the repositories. The CRRD discusses from a conceptual engineering standpoint the structures, systems, equipment, and operations necessary to (1) receive unreprocessed spent fuel assemblies via standard shipping casks, (2) offload these assemblies, (3) place the assemblies in canisters, (4) transport the canisters to underground storage locations in the salt dome, and (5) place these canisters in terminal storage. The CRRD also elaborates on the concepts for the retrieval and recovery of the spent fuel after burial; describes the development of the shafts and the underground areas,as well as the supporting operational utility and administrative features of the repository; and discusses the impacts on the reference repository of (1) changes in the waste package concept, (2) dry receiving and dry temporary storage of waste, (3) terminal storage of reprocessing waste, and (4) alternative underground development schemes

Systems thinking in public health: a bibliographic contribution to a meta-narrative review.

Science.gov (United States)

Chughtai, Saad; Blanchet, Karl

2017-05-01

Research across the formal, natural and social sciences has greatly expanded our knowledge about complex systems in recent decades, informing a broadly inclusive, cross-disciplinary conceptual framework referred to as Systems Thinking (ST). Its use in public health is rapidly increasing, although there remains a poor understanding of how these ideas have been imported, adapted and elaborated by public health research networks worldwide. This review employed a mixed methods approach to narrate the development of ST in public health. Tabulated results from a literature search of the Web of Science Core Collection database were used to perform a bibliometric analysis and literature review. Annual publication counts and citation scores were used to analyse trends and identify popular and potential 'landmark' publications. Citation network and co-authorship network diagrams were analysed to identify groups of articles and researchers in various network roles. Our search string related to 763 publications. Filtering excluded 208 publications while citation tracing identified 2 texts. The final 557 publications were analysed, revealing a near-exponential growth in literature over recent years. Half of all articles were published after 2010 with almost a fifth (17.8%) published in 2014. Bibliographic analysis identified five distinct citation and co-authorship groups homophilous by common geography, research focus, inspiration or institutional affiliation. As a loosely related set of sciences, many public health researchers have developed different aspects of ST based on their underlying perspective. Early studies were inspired by Management-related literature, while later groups adopted a broadly inclusive understanding which incorporated related Systems sciences and approaches. ST is an increasingly popular subject of discussion within public health although its understanding and approaches remain unclear. Briefly tracing the introduction and development of these ideas