WorldWideScience

Sample records for standard addition procedure

  1. Radiation control standards and procedures

    Energy Technology Data Exchange (ETDEWEB)

    1956-12-14

    This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

  2. 5 CFR 179.309 - Additional administrative procedures.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Additional administrative procedures. 179.309 Section 179.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.309 Additional administrative procedures. Nothing...

  3. Caustic addition system operability test procedure

    International Nuclear Information System (INIS)

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E)

  4. Power transformer additional load losses separation procedure

    Directory of Open Access Journals (Sweden)

    Kostić Miloje M.

    2011-01-01

    Full Text Available The proposed procedure is based on the fact that total transformer losses (PLL1,n, determined by short circuit test, can be separated into two components: the eddy current losses in the windings (PEC1,n and stray flux losses (PSL1,n in iron parts of construction as well as in the transformer tank walls. The total additional load losses, PLLd1 and PLLdh, are determined by short circuit test results, conducted at rated frequency (f1 and at increased harmonic frequency (fh=h*f1. Using so obtained total additional load losses, PLLd1 and PLLdh, which can be expressed in the form PLLdh=PEC1,n*h2 + PSL1,n*h, the corresponding rate additional load losses values PEC1,n and PSL1,n are derived. At the end, for given load with predefined high harmonics content, (Ih/I1n, relative to rated current, the total additional load losses value ΣPLLdh > PLLd1, is found. In such a way all harmonics up to hmax are taken into account.

  5. Standardized procedure for tsunami PRA by AESJ

    International Nuclear Information System (INIS)

    Kirimoto, Yukihiro; Yamaguchi, Akira; Ebisawa, Katsumi

    2013-01-01

    After Fukushima Accident (March 11, 2011), the Atomic Energy Society of Japan (AESJ) started to develop the standard of Tsunami Probabilistic Risk Assessment (PRA) for nuclear power plants in May 2011. As Japan is one of the countries with frequent earthquakes, a great deal of efforts has been made in the field of seismic research since the early stage. To our regret, the PRA procedures guide for tsunami has not yet been developed although the importance is held in mind of the PRA community. Accordingly, AESJ established a standard to specify the standardized procedure for tsunami PRA considering the results of investigation into the concept, the requirements that should have and the concrete methods regarding tsunami PRA referring the opinions of experts in the associated fields in December 2011 (AESJ-SC-RK004:2011). (author)

  6. Standard manufacturing procedure of Tamra Bhasma.

    Science.gov (United States)

    Jagtap, Chandrashekhar Y; Prajapati, Pradeep Kumar; Patgiri, Biswajyoti; Shukla, Vinay J

    2012-10-01

    Tamra Bhasma (incinerated copper) is one of the main weapons in the archery of Ayurvedic practitioners. Though several methods of preparation of Tamra Bhasma (TB) are found in Rasashastra classics, several difficulties occur during the preparation of a good-quality Bhasma. In this study, TB was prepared and analyzed to develop the standard manufacturing procedure. Each unit operative procedure was considered as an independent processing and an attempt was made to validate each procedure. Wire used for the purpose of electrical earthing was taken for the preparation of Bhasma. Procedures of Shodhana, Marana, and Amritikarana were followed as per the classical references. Specific temperature pattern was adopted for Puta in the electrical muffle furnace. From 500 g of Tamra, 483.4 g of black colored TB was obtained after subjecting to three Putas. Final product was detected to be cupric sulfide in X-ray diffraction. In particle size distribution analysis 10% of the material was below the size of 2 μm, while in inductive coupled plasma - atomic absorption spectrometry 58.56 wt% copper and 22.48 wt% of sulfur were found present in the final product along with the elements such as arsenic, lead, zinc, mercury, and manganese in traces.

  7. 32 CFR Appendix A to Part 155 - Additional Procedural Guidance

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Additional Procedural Guidance A Appendix A to Part 155 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEFENSE INDUSTRIAL PERSONNEL SECURITY CLEARANCE PROGRAM Pt. 155, App. A Appendix A to Part 155—Additional Procedural...

  8. 42 CFR 493.1251 - Standard: Procedure manual.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Procedure manual. 493.1251 Section 493... Systems § 493.1251 Standard: Procedure manual. (a) A written procedure manual for all tests, assays, and.... (b) The procedure manual must include the following when applicable to the test procedure: (1...

  9. 21 CFR 120.6 - Sanitation standard operating procedures.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Sanitation standard operating procedures. 120.6... Provisions § 120.6 Sanitation standard operating procedures. (a) Sanitation controls. Each processor shall have and implement a sanitation standard operating procedure (SSOP) that addresses sanitation...

  10. 21 CFR 170.10 - Food additives in standardized foods.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Food additives in standardized foods. 170.10... (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES General Provisions § 170.10 Food additives... the Act, which proposes the inclusion of a food additive in such definition and standard of identity...

  11. 40 CFR 761.79 - Decontamination standards and procedures.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Decontamination standards and..., AND USE PROHIBITIONS Storage and Disposal § 761.79 Decontamination standards and procedures. (a) Applicability. This section establishes decontamination standards and procedures for removing PCBs, which are...

  12. Standard-E hydrogen monitoring system shop acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  13. Standard manufacturing procedure of Teekshna lauha bhasma

    Directory of Open Access Journals (Sweden)

    Thakur Rakesh Singh

    2016-04-01

    Conclusion: Pharmaceutical procedures given in Ayurvedic texts are necessary to prepare pakwa jambu phala varna T. lauha bhasma that complies with all the classical bhasma pariksha and modern analytical parameters in 20 puta at a temperature of 650 °C maintained for 1 h in EMF.

  14. Standard working procedures in production of traditionally fermented Sremska sausage

    Directory of Open Access Journals (Sweden)

    Vesković-Moračanin Slavica

    2011-01-01

    Full Text Available Investigations conducted within project "Techonological and protective characteristics of autochthonous strains of lactic acid bacteria isolated from traditional fermented sausages and possibilities for their implementation in the meat industry" (Project Number: 20127, financed on behalf of the Ministry for Science and Technology of the Republic of Serbia, have provided an answer on the characteristics of the quality of the used raw materials for the production of Sremska sausage - one of the most well-known Serbian traditionally fermented sausages (choice of meat, fatty tissue, additives and spices, and data have been registered in connection with the procedures of their processing, microclimatic conditions have been established (temperature, relative humidity, and air circulation during the entire process of production and fermentation, as well as the presence and types of microorganisms, primarily lactic acid bacteria (BMK, the carrier of lactic fermentation. The most important characteristics of the filling have been established, the smoking regimen, the regimens of fermentation, maturing, drying, as well as the parameters for quality and safety of the finished product. At the same time, the standard working procedure has been determined for the preparation of the meat, fatty tissue, the forming and inserting of the filling into the wrappers, as well as the characteristics of the finished products. The given standard working procedure should serve as a guideline for the meat industry in the production process of this traditional fermented sausage.

  15. Environmental Sciences Division Toxicology Laboratory standard operating procedures

    Energy Technology Data Exchange (ETDEWEB)

    Kszos, L.A.; Stewart, A.J.; Wicker, L.F.; Logsdon, G.M.

    1989-09-01

    This document was developed to provide the personnel working in the Environmental Sciences Division's Toxicology Laboratory with documented methods for conducting toxicity tests. The document consists of two parts. The first part includes the standard operating procedures (SOPs) that are used by the laboratory in conducting toxicity tests. The second part includes reference procedures from the US Environmental Protection Agency document entitled Short-Term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms, upon which the Toxicology Laboratory's SOPs are based. Five of the SOPs include procedures for preparing Ceriodaphnia survival and reproduction test. These SOPs include procedures for preparing Ceriodaphnia food (SOP-3), maintaining Ceriodaphnia cultures (SOP-4), conducting the toxicity test (SOP-13), analyzing the test data (SOP-13), and conducting a Ceriodaphnia reference test (SOP-15). Five additional SOPs relate specifically to the fathead minnow (Pimephales promelas) larval survival and growth test: methods for preparing fathead minnow larvae food (SOP-5), maintaining fathead minnow cultures (SOP-6), conducting the toxicity test (SOP-9), analyzing the test data (SOP-12), and conducting a fathead minnow reference test (DOP-14). The six remaining SOPs describe methods that are used with either or both tests: preparation of control/dilution water (SOP-1), washing of glassware (SOP-2), collection and handling of samples (SOP-7), preparation of samples (SOP-8), performance of chemical analyses (SOP-11), and data logging and care of technical notebooks (SOP-16).

  16. 77 FR 12454 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2012-03-01

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 97 [Docket No. 30829; Amdt. No. 3467] Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule...

  17. Adaptive Standard Operating Procedures for Complex Disasters

    Science.gov (United States)

    2017-03-01

    applies. Additionally, the predictive aspect of the SOP model provides policy makers and emergency planners a “ shopping list” for various types of...the complex crisis environment on September 11 as the needs of the moment inspired improvisational solutions in the absence of SOP guidance. The...three-minute window of opportunity for the military aircraft to intercept Flight 175 before it strikes the South Tower. In simulation terms, the goal

  18. 42 CFR 493.1256 - Standard: Control procedures.

    Science.gov (United States)

    2010-10-01

    ... results are used, statistical parameters (for example, mean and standard deviation) for each batch and lot... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Control procedures. 493.1256 Section 493... (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing Analytic...

  19. Renewable Fuel Standard (RFS2): Final Rule Additional Resources

    Science.gov (United States)

    The final rule of fuels and fuel additives: renewable fuel standard program is published on March 26, 2010 and is effective on July 1, 2010. You will find the links to this final rule and technical amendments supporting this rule.

  20. Renewable Fuel Standard Program (RFS1): Final Rule Additional Resources

    Science.gov (United States)

    The final rule of fuels and fuel additives: renewable fuel standard program is published on May 1, 2007 and is effective on September 1, 2007. You will find the links to this final rule and technical amendments supporting this rule.

  1. JSC Design and Procedural Standards, JSC-STD-8080

    Science.gov (United States)

    Punch, Danny T.

    2011-01-01

    This document provides design and procedural requirements appropriate for inclusion in specifications for any human spaceflight program, project, spacecraft, system, or end item. The term "spacecraft" as used in the standards includes launch vehicles, orbital vehicles, non-terrestrial surface vehicles, and modules. The standards are developed and maintained as directed by Johnson Space Center (JSC) Policy Directive JPD 8080.2, JSC Design and Procedural Standards for Human Space Flight Equipment. The Design and Procedural Standards contained in this manual represent human spacecraft design and operational knowledge applicable to a wide range of spaceflight activities. These standards are imposed on JSC human spaceflight equipment through JPD 8080.2. Designers shall comply with all design standards applicable to their design effort.

  2. Standard Operating Procedures for Female Genital Sexual Pain

    DEFF Research Database (Denmark)

    Fugl-Meyer, Kerstin S; Bohm-Starke, Nina; Damsted Petersen, Christina

    2012-01-01

    and psychological disorders are highlighted, and different somatic and psychological assessment and treatment modalities are discussed. Methods.  The Standard Operating Procedures (SOP) committee was composed of a chair and five additional experts. No corporate funding or remuneration was received. The authors...... therapeutic interventions. However, this international expert group will recommend guidelines for management of female GSP. Conclusions.  GSP disorders are complex. It is recommended that their evaluation and treatment are performed through comprehensive somato-psychological multidisciplinary approach. Fugl......Introduction.  Female genital sexual pain (GSP) is a common, distressing complaint in women of all ages that is underrecognized and undertreated. Definitions and terminology for female GSP are currently being debated. While some authors have suggested that GSP is not per se a sexual dysfunction...

  3. Energy efficiency standards for residential and commercial equipment: Additional opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Rosenquist, Greg; McNeil, Michael; Iyer, Maithili; Meyers, Steve; McMahon, Jim

    2004-08-02

    Energy efficiency standards set minimum levels of energy efficiency that must be met by new products. Depending on the dynamics of the market and the level of the standard, the effect on the market for a given product may be small, moderate, or large. Energy efficiency standards address a number of market failures that exist in the buildings sector. Decisions about efficiency levels often are made by people who will not be responsible for the energy bill, such as landlords or developers of commercial buildings. Many buildings are occupied for their entire lives by very temporary owners or renters, each unwilling to make long-term investments that would mostly reward subsequent users. And sometimes what looks like apathy about efficiency merely reflects inadequate information or time invested to evaluate it. In addition to these sector-specific market failures, energy efficiency standards address the endemic failure of energy prices to incorporate externalities. In the U.S., energy efficiency standards for consumer products were first implemented in California in 1977. National standards became effective starting in 1988. By the end of 2001, national standards were in effect for over a dozen residential appliances, as well as for a number of commercial sector products. Updated standards will take effect in the next few years for several products. Outside the U.S., over 30 countries have adopted minimum energy performance standards. Technologies and markets are dynamic, and additional opportunities to improve energy efficiency exist. There are two main avenues for extending energy efficiency standards. One is upgrading standards that already exist for specific products. The other is adopting standards for products that are not covered by existing standards. In the absence of new and upgraded energy efficiency standards, it is likely that many new products will enter the stock with lower levels of energy efficiency than would otherwise be the case. Once in the stock

  4. Processed foods and the consumer: additives, labeling, standards, and nutrition

    National Research Council Canada - National Science Library

    Packard, Vernal S

    1976-01-01

    ... supplements; and it brings together under one cover the health-related issues of food additives and nutrition. If I were to point to one objective of this work, it would be to guide student and consumer alike through the maze of food ingredients, regulations, and standards in order to make as clear as present knowledge allows the critical issues co...

  5. Monitoring the standard of a Grade 12 English First Additional ...

    African Journals Online (AJOL)

    Monitoring the standard of a Grade 12 English First Additional Language Reading, Comprehension, Summary and Grammar Paper. ... In this article these monitoring mechanisms, especially item analysis, are investigated. It is our ... recommendations regarding strategies that may remedy these problems in future.

  6. Standard Review Plan Maintenance Program implementing procedures document

    International Nuclear Information System (INIS)

    1996-11-01

    The implementing Procedures Document (IPD) was developed by the Inspection Program Projects Branch, Office of Nuclear Reactor Regulation, with assistance from Pacific Northwest National Laboratory, for the Standard Review Plan Maintenance Program (SRP-MP). The SRP-MP was established to maintain the Standard Review Plan (SRP) on an on-going basis. The IPD provides guidance, including an overall approach and procedures, for SRP-MP tasks. The objective of the IPD is to ensure that modifications to SRP need to reflect current NRC requirements and guidance are identified and that a consistent methodology is used to develop and revise SRP sections

  7. Standard Review Plan Update and Development Program. Implementing Procedures Document

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    This implementing procedures document (IPD) was prepared for use in implementing tasks under the standard review plan update and development program (SRP-UDP). The IPD provides comprehensive guidance and detailed procedures for SRP-UDP tasks. The IPD is mandatory for contractors performing work for the SRP-UDP. It is guidance for the staff. At the completion of the SRP-UDP, the IPD will be revised (to remove the UDP aspects) and will replace NRR Office Letter No. 800 as long-term maintenance procedures.

  8. Standardized methods for photography in procedural dermatology using simple equipment.

    Science.gov (United States)

    Hexsel, Doris; Hexsel, Camile L; Dal'Forno, Taciana; Schilling de Souza, Juliana; Silva, Aline F; Siega, Carolina

    2017-04-01

    Photography is an important tool in dermatology. Reproducing the settings of before photos after interventions allows more accurate evaluation of treatment outcomes. In this article, we describe standardized methods and tips to obtain photographs, both for clinical practice and research procedural dermatology, using common equipment. Standards for the studio, cameras, photographer, patients, and framing are presented in this article. © 2017 The International Society of Dermatology.

  9. 21 CFR 58.81 - Standard operating procedures.

    Science.gov (United States)

    2010-04-01

    ... following: (1) Animal room preparation. (2) Animal care. (3) Receipt, identification, storage, handling... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Standard operating procedures. 58.81 Section 58.81 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GOOD...

  10. Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis

    International Nuclear Information System (INIS)

    2016-01-01

    Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

  11. Hip arthroplasty in obese patients: rising prevalence – standard procedures?

    Directory of Open Access Journals (Sweden)

    Michael Skutek

    2016-06-01

    Full Text Available We examined our experience and, in particular, complications associated with total hip arthroplasty in obese and morbidly obese patients. We prospectively gathered 50 patients in a matched control series including 25 obese and morbidly obese patients. All patients were operated using the direct lateral approach and standard postoperative protocols. Operating room time, complications, dislocations, blood loss, cup position and clinical parameters using the Harris Hip Score and the Western Ontario and McMaster Universities Arthritis Index results were compared. Although there were some significant differences in clinical outcomes, standard procedures yielded good overall results and an acceptable rate of complications. Details approaching this patient entity are being discussed.

  12. The European Stroke Organisation Guidelines: a standard operating procedure

    DEFF Research Database (Denmark)

    Ntaios, George; Bornstein, Natan M; Caso, Valeria

    2015-01-01

    In 2008, the recently founded European Stroke Organisation published its guidelines for the management of ischemic stroke and transient ischemic attack. This highly cited document was translated in several languages and was updated in 2009. Since then, the European Stroke Organisation has published...... pace with this progress and driven by the strong determination of the European Stroke Organisation to further promote stroke management, education, and research, the European Stroke Organisation decided to delineate a detailed standard operating procedure for its guidelines. There are two important...... cornerstones in this standard operating procedure: The first is the implementation of the Grading of Recommendations Assessment, Development, and Evaluation methodology for the development of its Guideline Documents. The second one is the decision of the European Stroke Organisation to move from the classical...

  13. Quality assurance: Importance of systems and standard operating procedures

    OpenAIRE

    Kishu Manghani

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality...

  14. Standard operating procedures for serum and plasma collection: early detection research network consensus statement standard operating procedure integration working group.

    Science.gov (United States)

    Tuck, Melissa K; Chan, Daniel W; Chia, David; Godwin, Andrew K; Grizzle, William E; Krueger, Karl E; Rom, William; Sanda, Martin; Sorbara, Lynn; Stass, Sanford; Wang, Wendy; Brenner, Dean E

    2009-01-01

    Specimen collection is an integral component of clinical research. Specimens from subjects with various stages of cancers or other conditions, as well as those without disease, are critical tools in the hunt for biomarkers, predictors, or tests that will detect serious diseases earlier or more readily than currently possible. Analytic methodologies evolve quickly. Access to high-quality specimens, collected and handled in standardized ways that minimize potential bias or confounding factors, is key to the "bench to bedside" aim of translational research. It is essential that standard operating procedures, "the how" of creating the repositories, be defined prospectively when designing clinical trials. Small differences in the processing or handling of a specimen can have dramatic effects in analytical reliability and reproducibility, especially when multiplex methods are used. A representative working group, Standard Operating Procedures Internal Working Group (SOPIWG), comprised of members from across Early Detection Research Network (EDRN) was formed to develop standard operating procedures (SOPs) for various types of specimens collected and managed for our biomarker discovery and validation work. This report presents our consensus on SOPs for the collection, processing, handling, and storage of serum and plasma for biomarker discovery and validation.

  15. 75 FR 72942 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2010-11-29

    ...: Harry J. Hodges, Flight Procedure Standards Branch (AFS-420), Flight Technologies and Programs Divisions..., SD, Rapid City Rgnl, ILS OR LOC RWY 32, Amdt 19 Newport News, VA, Newport News/Williamsburg Intl, ILS OR LOC RWY 7, Amdt 33 Newport News, VA, Newport News/Williamsburg Intl, ILS OR LOC RWY 25, Amdt 1...

  16. Standardization of SMP procedure and its impact on outcome

    Directory of Open Access Journals (Sweden)

    Rachita S Dhurat

    2017-01-01

    Full Text Available Background: Cosmetic deformities can result from various types of alopecia or even post hair transplantation procedures. Patients with such deformities seek aesthetically appealing longer-lasting options. Scalp concealers are commonly used by men and women to camouflage these deformities. Scalp micropigmentation (SMP is one of the concealers recently gaining popularity. Objectives: SMP is a novel technique wherein microdot tattoos are placed in a stippling pattern to mimic hair follicles that are cut close to the scalp and various variables affecting its outcome were evaluated. Methods: Forty-five subjects were recruited for the study. The various factors affecting outcome of SMP—angle of needle against the scalp, depth of needle into the scalp, time of the needle contact in scalp, speed of the rotor, resistance of scalp, color of pigment, viscosity of dye, needle number, needle thickness, and pattern of dot placement—were systematically studied in 15 patients through clinical photographs and trichoscopy. Ideal depth of pigment deposition was assessed through histopathological examination. After using these optimum variables, standardized SMP was performed in 30 patients with hair loss (3 patients with cicatricial and 27 patients with diffuse non-cicatricial alopecia. SMP was also used to create an aesthetically denser hairline. The outcome of the procedure was evaluated using standardized global photographs. Results: The ideal parameters were established to achieve standard reproducible results. There were great patient satisfaction and acceptance of the procedure. All the patients showed moderate to great improvement after the procedure with satisfactory scalp coverage. Adverse events were transient which were seen in the form of edema and redness. Conclusion: SMP offers a non-medical, tattoo-based cosmetically appealing and effective “cover-up” that hides the unsightly conditions. The cosmetic tattoo placement creates an illusion of

  17. The European Stroke Organisation Guidelines: a standard operating procedure.

    Science.gov (United States)

    Ntaios, George; Bornstein, Natan M; Caso, Valeria; Christensen, Hanne; De Keyser, Jacques; Diener, Hans-Christoph; Diez-Tejedor, Exuperio; Ferro, Jose M; Ford, Gary A; Grau, Armin; Keller, Emanuella; Leys, Didier; Russell, David; Toni, Danilo; Turc, Guillaume; Van der Worp, Bart; Wahlgren, Nils; Steiner, Thorsten

    2015-10-01

    In 2008, the recently founded European Stroke Organisation published its guidelines for the management of ischemic stroke and transient ischemic attack. This highly cited document was translated in several languages and was updated in 2009. Since then, the European Stroke Organisation has published guidelines for the management of intracranial aneurysms and subarachnoidal hemorrhage, for the establishment of stroke units and stroke centers, and recently for the management of intracerebral hemorrhage. In recent years, the methodology for the development of guidelines has evolved significantly. To keep pace with this progress and driven by the strong determination of the European Stroke Organisation to further promote stroke management, education, and research, the European Stroke Organisation decided to delineate a detailed standard operating procedure for its guidelines. There are two important cornerstones in this standard operating procedure: The first is the implementation of the Grading of Recommendations Assessment, Development, and Evaluation methodology for the development of its Guideline Documents. The second one is the decision of the European Stroke Organisation to move from the classical model of a single Guideline Document about a major topic (e.g. management of ischemic stroke) to focused modules (i.e. subdivisions of a major topic). This will enable the European Stroke Organisation to react faster when new developments in a specific stroke field occur and update its recommendations on the related module rather swiftly; with the previous approach of a single large Guideline Document, its entire revision had to be completed before an updated publication, delaying the production of up-to-date guidelines. After discussion within the European Stroke Organisation Guidelines Committee and significant input from European Stroke Organisation members as well as methodologists and analysts, this document presents the official standard operating procedure for

  18. "Heidelberg standard examination" and "Heidelberg standard procedures" - Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education.

    Science.gov (United States)

    Nikendei, C; Ganschow, P; Groener, J B; Huwendiek, S; Köchel, A; Köhl-Hackert, N; Pjontek, R; Rodrian, J; Scheibe, F; Stadler, A-K; Steiner, T; Stiepak, J; Tabatabai, J; Utz, A; Kadmon, M

    2016-01-01

    The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects "Heidelberg standard examination" and "Heidelberg standard procedures", which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties.

  19. Improving the review of standard operating procedures: a novel electronic system for compounding pharmacies.

    Science.gov (United States)

    Brensel, Robert; Brensel, Scott; Ng, Amy

    2013-01-01

    Since the New England Compounding Center disaster in 2012, the importance of following correct procedures during every phase of customized pharmacy has been a focus of governmental interest and action as well as public scrutiny. Many pharmacies rely on the rote review of standard operating procedures to ensure that staff members understand and follow protocols that ensure the safety and potency of all compounds prepared, but that approach to continuing education can be cumbersome and needlessly time-consuming. In addition, documenting and retrieving evidence of employee competence can be difficult. In this article, we describe our use of online technology to improve our methods of educating staff about the full range of standard operating procedures that must be followed in our pharmacy. The system we devised and implemented has proven to be effective, easy to update and maintain, very inexpensive, and user friendly. Its use has reduced the time previously required for a read-over review of standard operating procedures from 30 or 40 minutes to 5 or 10 minutes in weekly staff meetings, and we can now easily document and access proof of employees' comprehension of that content. It is our hope that other small compounding pharmacies will also find this system of online standard operating procedure review helpful.

  20. 34 CFR 602.24 - Additional procedures certain institutional accreditors must have.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Additional procedures certain institutional accreditors must have. 602.24 Section 602.24 Education Regulations of the Offices of the Department of Education... Additional procedures certain institutional accreditors must have. If the agency is an institutional...

  1. Quality assurance: Importance of systems and standard operating procedures.

    Science.gov (United States)

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  2. Standard procedures for pooling health physics data for epidemiologic studies

    International Nuclear Information System (INIS)

    Strom, D.J.; Beck, W.L.; Stansbury, P.S.; Tankersley, W.G.; Watson, J.E. Jr.

    1983-01-01

    The objectives of the study are: (1) to determine the availability of dosimetry data and supporting documentation at multiple facilities; (2) to develop criteria and methods for optimally retrieving data; (3) to evaluate and document the quality and completeness of data and dosimetry programs; (4) to put dosimetry data (e.g., external, whole body counting, and bioassay data) from various facilities in a single format for epidemiologic analysis; and (5) to document all work for peer review. To achieve these objectives, a ''Dosimetry Records and Radiation Hazards Questionnaire'' was developed to send to the facilities under study. Responses to this questionnaire are used to develop data retrieval criteria and methods, and to retrieve data. Dose data are reformatted into Standard Intermediate Dosimetry Files for editing and characterization. Evaluations of dosimetry programs are performed concurrently. Results of these steps are brought together and analysis files created. Status of this work in the context of the Department of Energy 5-Rem Study is reported. The standard procedures are applicable to single- as well as multiple-facility studies

  3. Measuring and diagnosing unilateral neglect: a standardized statistical procedure.

    Science.gov (United States)

    Toraldo, Alessio; Romaniello, Cristian; Sommaruga, Paolo

    Unilateral neglect is usually investigated by adminstering stimuli (targets) in different positions, with targets being responded to by the patient (Hit) or omitted. In spite of this homogeneity of data type, neglect indices and diagnostic criteria vary considerably, causing inconsistencies in both clinical and experimental settings. We aimed at deriving a standard analysis which would apply to all tasks sharing this data form. A-priori theoretical reasoning demonstrated that the mean position of Hits in space (MPH) is an optimal index for correctly diagnosing and quantifying neglect. Crucially MPH eliminates the confounding effects of deficits that are different from neglect (non-lateral) but which decrease Hit rate. We ran a Monte Carlo study to assess MPH's (so far overlooked) statistical behavior as a function of numbers of targets and Hits. While average MPH was indeed insensitive to non-lateral deficits, MPH's variance (like that of all other neglect indices) increased dramatically with increasing non-lateral deficits. This instability would lead to alarmingly high false-positive rates (FPRs) when applying a classical diagnostic procedure that compares one patient with a control sample. We solved the problem by developing an equation that takes into account MPH instability and provides correct cut-offs and close-to-nominal FPRs, even without control subjects. We developed a computerized program which, given the raw data, yields the MPH, a z-score and a p-value. We provided a standard method that allows clinical and experimental neuropsychologists to diagnose and measure neglect in a consistent way across the vast majority of tasks.

  4. 21 CFR 70.10 - Color additives in standardized foods and new drugs.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Color additives in standardized foods and new... SERVICES GENERAL COLOR ADDITIVES General Provisions § 70.10 Color additives in standardized foods and new... proposes the inclusion of a color additive in the standardized food, the provisions of the regulations in...

  5. FLOW-INJECTION CALIBRATION OF INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY USING THE GENERALIZED STANDARD ADDITIONS METHOD

    OpenAIRE

    GINE, MF; KRUG, FJ; FILHO, HB; DOSREIS, BF; ZAGATTO, EAG; BRUNS, RE

    1988-01-01

    The generalised standard additions method (GSAM), employing least-squares regression, provides a convenient method for obtaining the calibration matrix (K-matrix) in multi-element analysis. The GSAM is based on the response variations obtained after the addition of known incremental amounts of the interfering and test elements to the samples. As application of the GSAM requires a number of additions, automation is recommended for routine analytical work. Any automated procedure for implementi...

  6. Additives: The key for automobiles to meet new emission standards

    International Nuclear Information System (INIS)

    Friedman, J.R.

    1992-01-01

    Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

  7. Standard formatted data units-control authority procedures

    Science.gov (United States)

    1991-01-01

    The purpose of this document is to establish a set of minimum and optional requirements for the implementation of Control Authority (CA) organizations within and among the Agencies participating in the Consultative Committee for Space Data Systems (CCSDS). By satisfying these requirements, the resultant cooperating set of CA organizations will produce a global CA service supporting information transfer with digital data under the Standard Formatted Data Unit (SFDU) concept. This service is primarily accomplished through the registration, permanent archiving, and dissemination of metadata in the form of Metadata Objects (MDO) that assist in the interpretation of data objects received in SFDU form. This Recommendation addresses the responsibilities, services, and interface protocols for a hierarchy of CA organizations. The top level, consisting of the CCSDS Secretariat and its operational agent, is unique and primarily provides a global coordination function. The lower levels are Agency CA organizations that have primary responsibility for the registration, archiving, and dissemination of MDOs. As experience is gained and technology evolves, the CA Procedures will be extended to include enhanced services and their supporting protocols. In particular, it is anticipated that eventually CA organizations will be linked via networks on a global basis, and will provide requestors with online automated access to CA services. While this Recommendation does not preclude such operations, it also does not recommend the specific protocols to be used to ensure global compatibility of these services. These recommendations will be generated as experience is gained.

  8. Quality assurance: Importance of systems and standard operating procedures

    Directory of Open Access Journals (Sweden)

    Kishu Manghani

    2011-01-01

    Full Text Available It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  9. The Role of Number Words in Preschoolers' Addition Concepts and Problem-Solving Procedures

    Science.gov (United States)

    Patel, Pooja; Canobi, Katherine Helen

    2010-01-01

    Preschoolers' conceptual understanding and procedural skills were examined so as to explore the role of number-words and concept-procedure interactions in their additional knowledge. Eighteen three- to four-year-olds and 24 four- to five-year-olds judged commutativity and associativity principles and solved two-term problems involving number words…

  10. 49 CFR 1111.9 - Procedural schedule in cases using simplified standards.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Procedural schedule in cases using simplified... PROCEDURES § 1111.9 Procedural schedule in cases using simplified standards. (a) Procedural schedule. Absent a specific order by the Board, the following general procedural schedules will apply in cases using...

  11. Comparison between different kinds of additional filtration in standards X-ray beams, mammography level

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Eduardo de Lima; Vivolo, Vitor; Potiens, Maria da Penha Albuquerque, E-mail: edu1905@gmail.co, E-mail: vivolo@ipen.b, E-mail: mppalbu@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    In this work has been made a comparison between different materials used as filtration in standards X-ray beams, mammography level. For this, was analyzed the parameters that give the radiation spectrum, such as tube voltage and current, additional filtration and half-value layer. For the additional filtration have been used Molybdenum (Mo) and Aluminum (Al), in an X-ray system with a tube of Tungsten (W) target. Because of the difficulty to establish mammography qualities in a standard X-ray system, given the limitations created by the IEC 61267, it is necessary to create a procedure based on different reports, presented by different organizations, such as the International Atomic Energy Agency and the Physikalisch-Technischen Bundesanstalt (PTB). The last one presents some results obtained with an X-ray tube with an anode of W. The IEC 61267 presents a fixed filtration of 0.03 mm of Mo, for a tube with an anode of this same material. In this work was determined an additional filtration of Mo that could simulate the specter emitted by an anode of this material, using the HVL as parameter. For the filtration of Al, it was followed the data presented by the PTB. The additional filtration has been determined using the same parameter. (author)

  12. Estimating the Standard Error of the Judging in a modified-Angoff Standards Setting Procedure

    Directory of Open Access Journals (Sweden)

    Robert G. MacCann

    2004-03-01

    Full Text Available For a modified Angoff standards setting procedure, two methods of calculating the standard error of the..judging were compared. The Central Limit Theorem (CLT method is easy to calculate and uses readily..available data. It estimates the variance of mean cut scores as a function of the variance of cut scores within..a judging group, based on the independent judgements at Stage 1 of the process. Its theoretical drawback is..that it is unable to take account of the effects of collaboration among the judges at Stages 2 and 3. The..second method, an application of equipercentile (EQP equating, relies on the selection of very large stable..candidatures and the standardisation of the raw score distributions to remove effects associated with test..difficulty. The standard error estimates were then empirically obtained from the mean cut score variation..observed over a five year period. For practical purposes, the two methods gave reasonable agreement, with..the CLT method working well for the top band, the band that attracts most public attention. For some..bands in English and Mathematics, the CLT standard error was smaller than the EQP estimate, suggesting..the CLT method be used with caution as an approximate guide only.

  13. International standards and quality control procedures applied to nuclear instruments

    International Nuclear Information System (INIS)

    Urbanski, P.

    2008-01-01

    The survey of international standards related to Nuclear Instrumentation and QC tests was presented. From among the 29'336 active international standards published by such organizations as ISO, IEC, CEN and CENELEC, only 582 are devoted to nuclear instruments. The international classification of standards (ICS) is shown. Also, the list of 582 international standards related to nuclear instruments is attached. (author)

  14. 75 FR 2122 - Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of...

    Science.gov (United States)

    2010-01-14

    ... Energy Consumption of Refrigerator-Freezers With Automatic Ice Makers AGENCY: Office of the General...) to prescribe standardized test procedures to measure the energy consumption of certain consumer... Energy Consumption of Electric Refrigerators and Electric Refrigerator- Freezers (Appendix A1). DOE...

  15. Standard interface files and procedures for reactor physics codes. Version IV

    International Nuclear Information System (INIS)

    O'Dell, R.D.

    1977-09-01

    Standards, procedures, and recommendations of the Committee on Computer Code Coordination for promoting the exchange of reactor physics codes are updated to Version IV status. Standards and procedures covering general programming, program structure, standard interface files, and file management and handling subroutines are included

  16. Manual for the GAW Precipitation Chemistry Programme: Guidelines, Data Quality Objectives and Standard Operating Procedures

    National Research Council Canada - National Science Library

    Allan, Mary A

    2004-01-01

    This is a manual for the Global Atmosphere Watch Precipitation Chemistry (GAW-PC) Programme. Where possible, it describes standard operating procedures and otherwise provides guidance on methods and procedures...

  17. Standardization of the time for the execution of HANARO start-up and shutdown procedures

    International Nuclear Information System (INIS)

    Choi, H. Y.; Lim, I. C.; Hwang, S. R.; Kang, T. J.; Youn, D. B.

    2003-01-01

    For the standardization of the time to execute HANARO start-up and shutdown procedures, code names were assigned to the individual procedures and the work time were investigated. The data recorded by the operators during start-up and shutdown were statistically analyzed. The analysis results will be used for the standardization of start-up and shutdown procedures and it will be reflected in the procedure document

  18. Determination of free acid by standard addition method in potassium thiocyanate

    International Nuclear Information System (INIS)

    1981-01-01

    An analytical method for determination of free acidity in all SRP process solutions has been developed. Free acidity was successfully determined in solutions of nitric acid and the nitrates of aluminum, chromium(III), iron(III), mercury(II), nickel(II), thorium, and uranium(VI), at metal-to-acid ratios <2.5. Sample requirements, instrumentation, and mode of operation are similar to those currently used in the Laboratories Department free acid procedures. The simple procedure would be suitable for automation and microprocessor control. The method consists of two additions of known increments of acid into a solution containing the sample aliquot (10 μmoles free acid) and 10 mL 1M potassium thiocyanate. The potential is determined in the initial solution and after each addition with a glass electrode and pH meter. The sample concentration is calculated by solution of three simultaneous Nernst equations. Two programs for this iterative computation are available: one written for the PDP-15 computer and another for a Hewlett-Packard 67 (or 97) programmable calculator. The accuracy of the result is verified by a slope that approximates the theoretical Nernst value. The relative standard deviation is <2.5%. This memorandum includes a survey of experiments with thermometric, pH, and Gran plot titrations in a variety of complexants, from which this particular system and technique logically evolved. The appendix includes a literature survey of sixty references, a discussion of the basic measurements, and a complete analytical procedure. The final step for completion of this RTA is training and consultation at the convenience of the Laboratories Department for demonstration of the method with process samples

  19. 21 CFR 606.100 - Standard operating procedures.

    Science.gov (United States)

    2010-04-01

    ... blood and blood components for transfusion and further manufacturing purposes. Such procedures shall be... the site of phlebotomy to give maximum assurance of a sterile container of blood. (4) Method of... precautions taken to measure accurately the quantity of blood removed from the donor. (6) Methods of component...

  20. Creating Royal Australian Navy Standard Operating Procedures using Flow Diagrams

    Science.gov (United States)

    2015-08-01

    set it is important to determine writing and approval responsibilities, storage methods and publishing details before SOPs are written. This...5 4.1.1 Brainstorming ...managed accordingly. Key activities include scoping the set of SOPs, creating a team, developing a plan, writing , reviewing and approving procedures, and

  1. Item Disordinality with the Bookmark Standard Setting Procedure.

    Science.gov (United States)

    Skaggs, Gary; Tessema, Aster

    This paper presents an application of the bookmark procedure to a test comprised of increasing text difficulty levels. The Test of English Proficiency for Adults (TEPA) was used for this study. Three forms of the TEPA were field tested in 1999 with approximately 1,000 non-native English speaking students enrolled in English-as-a-Second-Language…

  2. Policy, Procedures and Standards for Enterprise Information Management

    Science.gov (United States)

    This policy establishes a standard approach for managing information produced by, funded by, or received per regulated reporting and/or federal-wide requirements and subsequently held or cataloged in information management systems by EPA.

  3. Standard Operating Procedure for Accelerated Corrosion Testing at ARL

    Science.gov (United States)

    2017-11-01

    to scribe nonferrous materials so as to prevent contamination of the substrate during the process. The "X" scribe is made by scribing 2 intersecting...may include GMW14872 Cyclic Corrosion Testing (typically Exterior, Exposure C), ASTM B117 Neutral Salt Fog Testing, ASTM G50 Atmospheric Corrosion...using the same cleaning procedures, contamination of the substrate is minimized during the scribe process. All partners adhering to guidelines and

  4. Standardization of the Romanowsky staining procedure: an overview.

    Science.gov (United States)

    Bentley, S A; Marshall, P N; Trobaugh, F E

    1980-01-01

    Commerically available Romanowsky blood stains are variable mixtures of thiazein dyes and brominated fluorescein derivatives with varying degrees of metallic salt contamination in a number of different solvent systems. There is a need for standardized Romanowsky stains of constant composition, which, when used in conjunction with a carefully controlled specimen preparation technique, should give consistent performance. Such a preparation system would be of great value to hematologists in general and would be essential to the validity of data obtained by the digital processing of blood cell images. It is possible to prepare standardized Romanowsky stains as mixtures of two or three dye components, namely, eosin Y, azure B and methylene blue, although azure B has only recently become commercially available at an acceptable degree of purity. The logistic problems of stain standardization are discussed.

  5. Standardization of specifications and inspection procedures for LEU plate-type research reactor fuels

    International Nuclear Information System (INIS)

    1988-06-01

    With the transition to high density uranium LEU fuel, fabrication costs of research reactor fuel elements have a tendency to increase because of two reasons. First, the amount of the powder of the uranium compound required increases by more than a factor of five. Second, fabrication requirements are in many cases nearer the fabrication limits. Therefore, it is important that measures be undertaken to eliminate or reduce unnecessary requirements in the specification or inspection procedures of research reactor fuel elements utilizing LEU. An additional stimulus for standardizing specifications and inspection procedures at this time is provided by the fact that most LEU conversions will occur within a short time span, and that nearly all of them will require preparation of new specifications and inspection procedures. In this sense, the LEU conversions offer an opportunity for improving the rationality and efficiency of the fuel fabrication and inspection processes. This report focuses on the standardization of specifications and inspection processes of high uranium density LEU fuels for research reactors. However, in many cases the results can also be extended directly to other research reactor fuels. 15 refs, 1 fig., 3 tabs

  6. Planning and evaluating prescribed fires--a standard procedure

    Science.gov (United States)

    William C. Fischer

    1978-01-01

    Provides a standard format and checklist to guide the land manager through the important steps for prescribed burning. Describes the kind of information needed to prepare fire prescriptions and burning plans. Identifies the elements of a fire prescription, a burning plan, and a prescribed fire evaluation. A plan written for an actual prescribed burning is included as...

  7. Standardized Procedures for Use of Nucleic Acid-Based Tools

    Science.gov (United States)

    2008-08-01

    Madigan, M., J. Martinko, P. Dunlap and D. Clark (2006). Brock Biology Of Microorganisms , Benjamin Cummings. Mailloux, B. J. and M. E. Fuller...Methods for Enumeration of Microorganisms and Development of a Dhc Reference Standard...Dehalococcoides (Dhc) and other environmentally relevant microorganisms . The results of these analyses are increasingly used by site owners

  8. Determination of free acid by standard addition method in potassium thiocyanate

    International Nuclear Information System (INIS)

    Baumann, E.W.

    1982-06-01

    The free acid content of solutions containing hydrolyzable ions has been determined potentiometrically by a standard addition method. Two increments of acid are added to the sample in 1M potassium thiocyanate solution. The sample concentration is calculated by solution of three simultaneous Nernst equations. The method has been demonstrated for solutions containing Al 3+ , Cr 3+ , Fe 3+ , Hg 2+ , Ni 2+ , Th 4+ , or UO 2 2+ with a metal-to-acid ratio of < 2.5. The method is suitable for determination of 10 μmoles acid in 10 mL total volume. The accuracy can be judged from the agreement of the Nernst slopes found in the presence and absence of hydrolyzable ions. The relative standard deviation is < 2.5%. The report includes a survey of experiments with thermometric, pH, and Gran plot titrations in a variety of complexants, from which the method was evolved. Also included is a literature survey of sixty references, a discussion of the basic measurements, and a complete analytical procedure

  9. 12 CFR 616.6300 - Leasing policies, procedures, and underwriting standards.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Leasing policies, procedures, and underwriting standards. 616.6300 Section 616.6300 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM LEASING § 616.6300 Leasing policies, procedures, and underwriting standards. The board of each institution...

  10. 7 CFR 201.67 - Seed certifying agency standards and procedures.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Seed certifying agency standards and procedures. 201...) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Certified Seed § 201.67 Seed certifying agency standards and procedures. In order to qualify as a seed certifying agency for purposes of section 101(a)(25) of the Federal...

  11. Procedures and Standards Handbook. Version 3.0. What Works Clearinghouse

    Science.gov (United States)

    What Works Clearinghouse, 2014

    2014-01-01

    This "What Works Clearinghouse Procedures and Standards Handbook (Version 3.0)" provides a detailed description of the standards and procedures of the What Works Clearinghouse (WWC). The remaining chapters of this Handbook are organized to take the reader through the basic steps that the WWC uses to develop a review protocol, identify…

  12. A Comparison of Standard-Setting Procedures for an OSCE in Undergraduate Medical Education.

    Science.gov (United States)

    Kaufman, David M.; Mann, Karen V.; Muijtjens, Arno M. M.; van der Vleuten, Cees P. M.

    2000-01-01

    Compared four standard-setting procedures for an objective structure clinical examination (OSCE) in medical education. Applied Angoff, borderline, relative, and holistic procedures to the data used to establish a cutoff score for a pass/fail decision. The Angoff and borderline procedures gave similar results; however, the relative and holistic…

  13. Operational procedure standard for occurrences involving radioactive materials

    Energy Technology Data Exchange (ETDEWEB)

    Piekarz, Leonardo, E-mail: leonardopbm@yahoo.com.br [Academia de Bombeiros Militar de Minas Gerais, Belo Horizonte, MG (Brazil); Rezende, Talita C.; Pinheiro, Christiano J.G., E-mail: talitacolombi@yahoo.com, E-mail: christrieste@yahoo.it [Universidade Federal do Espirito Santo (CCA/UFES), Alegre, ES (Brazil). Programa de Pós-Graduação em Engenharia Química

    2017-07-01

    This study has as objective to analyze more deeply the actions of response to emergencies involving radioactive materials, in the intent to establish a pattern to the actions performed by the military fire fighters of the Military Fire Brigade of Minas Gerais. To met these goals, it has been attempted to analyze the procedures utilized and recommended, nowadays, for the military fire fighters of CBMMG, and through directed studies, to suggest new actions possible to be executed in the local of the emergency in a way that will not expose the garrison to doses of ionizing radiation that may prejudice them. It is a study of bibliographic, exploratory, and also descriptive nature, realized through a qualitative approach. The techniques used for the research were the analysis of institutional documents, norms and other literature produced by renamed entities in the radiologic and biosafety areas. It was then concluded that CBMMG, through simple actions of response, can provide higher quality and safety in the operations involving radiologic accidents, standing out that the implemented actions nowadays are very beneath the capacity of the corporation, due to the lack of knowledge of the matter by the fire fighters. It was proposed, then, that new actions be implemented and instituted as operational procedures to be used on those emergencies, with the objective of provide a higher safety and professionalism in the attendance to emergencies involving radioactive materials. (author)

  14. Operational procedure standard for occurrences involving radioactive materials

    International Nuclear Information System (INIS)

    Piekarz, Leonardo; Rezende, Talita C.; Pinheiro, Christiano J.G.

    2017-01-01

    This study has as objective to analyze more deeply the actions of response to emergencies involving radioactive materials, in the intent to establish a pattern to the actions performed by the military fire fighters of the Military Fire Brigade of Minas Gerais. To met these goals, it has been attempted to analyze the procedures utilized and recommended, nowadays, for the military fire fighters of CBMMG, and through directed studies, to suggest new actions possible to be executed in the local of the emergency in a way that will not expose the garrison to doses of ionizing radiation that may prejudice them. It is a study of bibliographic, exploratory, and also descriptive nature, realized through a qualitative approach. The techniques used for the research were the analysis of institutional documents, norms and other literature produced by renamed entities in the radiologic and biosafety areas. It was then concluded that CBMMG, through simple actions of response, can provide higher quality and safety in the operations involving radiologic accidents, standing out that the implemented actions nowadays are very beneath the capacity of the corporation, due to the lack of knowledge of the matter by the fire fighters. It was proposed, then, that new actions be implemented and instituted as operational procedures to be used on those emergencies, with the objective of provide a higher safety and professionalism in the attendance to emergencies involving radioactive materials. (author)

  15. 75 FR 37733 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2010-06-30

    ... Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... direct final rule to amend the Renewable Fuel Standard program requirements on May 10, 2010. Because EPA... Fuel Standard program requirements, published on May 10, 2010. We stated in that direct final rule that...

  16. Additional radiation dose to population due to X-ray diagnostic procedures

    International Nuclear Information System (INIS)

    Chougule, A.

    2006-01-01

    entrance skin dose (mGy) received by the patient during the radiological procedure will be presented in the paper. From the population of the region, the frequency of radiological procedures/person/year is estimated and in the present study it worked out to be 10,500-procedures/ year/100,000 population. From the data collected, estimation of additional contribution of radiation dose to population due to X ray diagnostic procedures was done. In present st udy it was found that the contribution of radiation dose due to radiological procedure to population is 0.22 mSv/year/person. The UNSCEAR (2000) reported the 1.2 mSv as mean effective dose per capita due to medical X ray examinations in developed countries where frequency of x ray procedure is much higher as compared to India. The results in detail are discussed in this communication. (author)

  17. 78 FR 12005 - Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards; Public Hearing

    Science.gov (United States)

    2013-02-21

    ... Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards; Public Hearing AGENCY: Environmental... EPA is announcing a public hearing to be held for the proposed rule ``Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards,'' which was published separately in the Federal Register on...

  18. 76 FR 37703 - Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel Standards; Public Hearing

    Science.gov (United States)

    2011-06-28

    ... Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel Standards; Public Hearing AGENCY: Environmental... hearing to be held for the proposed rule ``Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel... be proposing amendments to the renewable fuel standard program regulations to establish annual...

  19. Muscle sparing lateral thoracotomy: the standard incision for thoracic procedures

    Directory of Open Access Journals (Sweden)

    Mihai Dumitrescu

    2017-05-01

    Full Text Available Lateral thoracotomy is a versatile approach with many variations and is currently the most widely used incision in thoracic surgery. In the current article we are presenting the muscle-sparing lateral thoracotomy in the lateral decubitus position which we consider to be the “standard” for lateral thoracotomies. Indications, surgical technique and pitfalls are described alongside our experience with thoracic drainage. Although there is no consensus regarding the name of this incision, some authors call it “axillary thoracotomy” while others call it a “modified lateral thoracotomy”, they all agree on one aspect – the importance of muscle sparing – which makes it the go-to thoracotomy for both small and large procedures involving the lung. Lateral muscle sparing thoracotomy allows for good exposure of the pulmonary hilum, fissures, apex and diaphragm. The approach is easy and quick to perform while at the same time ensuring faster postoperative recovery by sparing the latissimus dorsi muscle, better cosmetics and lower postoperative pain score when compared to the posterolateral or classical lateral thoracotomies.

  20. Standard-C hydrogen monitoring system acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1994-09-02

    The primary function of the standard-C hydrogen monitoring system (SHMS) is to monitor specifically for hydrogen in the waste tank atmosphere which may also contain (but not be limited to) unknown quantities of air, nitrous oxide, ammonia, water vapor, carbon dioxide, carbon monoxide, and other gaseous constituents. The SHMS will consist of hydrogen specific monitors, a grab sampler to collect samples for laboratory analysis, a gas chromatograph, and the gas sample collection system necessary to support the operation of the instrumentation. This system will be located in a cabinet placed at the tank of interest. The purpose of this document is to demonstrate that the SHMS is constructed as intended by design.

  1. 78 FR 14010 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-03-04

    ...). Issued in Washington, DC, on February 15, 2013. John M. Allen, Director, Flight Standards Service..., RNAV (GPS) RWY 36, Orig Siren, WI, Burnett County, Takeoff Minimums and Obstacle DP, Orig BILLING CODE...

  2. 75 FR 63712 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2010-10-18

    ... 1, 2010. John M. Allen, Director, Flight Standards Service. Adoption of the Amendment 0 Accordingly..., Takeoff Minimums and Obstacle DP, Amdt 3 Siren, WI, Burnett County, VOR OR GPS RWY 5, Amdt 2B Solon...

  3. 76 FR 40600 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2011-07-11

    ... Navigation (air). Issued in Washington, DC, on June 24, 2011. John M. Allen, Director, Flight Standards... Corinth, MS, Roscoe Turner, RNAV (GPS) RWY 36, Amdt 1 Harvey, ND, Harvey Muni, RNAV (GPS) RWY 29, Orig-A...

  4. 75 FR 25760 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2010-05-10

    .... John M. Allen, Director, Flight Standards Service. Adoption of the Amendment 0 Accordingly, pursuant to... Muni, Takeoff Minimums and Obstacle DP, Amdt 3 Galliano, LA, South Lafourche Leonard Miller Jr, LOC/DME...

  5. 75 FR 9098 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2010-03-01

    ... 19, 2010. John M. Allen, Director, Flight Standards Service. Adoption of the Amendment 0 Accordingly... GALLIANO SOUTH LAFOURCHE 0/3269 2/3/10 RNAV (GPS) RWY 18, AMDT 1. LEONARD MILLER JR. 8-Apr-10 LA JENNINGS...

  6. 16 CFR 1610.35 - Procedures for testing special types of textile fabrics under the standard.

    Science.gov (United States)

    2010-01-01

    ... textile fabrics under the standard. 1610.35 Section 1610.35 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES Rules and Regulations § 1610.35 Procedures for testing special types of textile fabrics under the standard. (a) Fabric...

  7. Federal standards and procedures for the National Watershed Boundary Dataset (WBD)

    Science.gov (United States)

    ,; ,; ,

    2013-01-01

    The Watershed Boundary Dataset (WBD) is a comprehensive aggregated collection of hydrologic unit data consistent with the national criteria for delineation and resolution. This document establishes Federal standards and procedures for creating the WBD as seamless and hierarchical hydrologic unit data, based on topographic and hydrologic features at a 1:24,000 scale in the United States, except for Alaska at 1:63,360 scale, and 1:25,000 scale in the Caribbean. The data within the WBD have been reviewed for certification through the 12-digit hydrologic unit for compliance with the criteria outlined in this document. Any edits to certified data will be reviewed against this standard prior to inclusion. Although not required as part of the framework WBD, the guidelines contain details for compiling and delineating the boundaries of two additional levels, the 14- and 16-digit hydrologic units, as well as the use of higher resolution base information to improve delineations. The guidelines presented herein are designed to enable local, regional, and national partners to delineate hydrologic units consistently and accurately. Such consistency improves watershed management through efficient sharing of information and resources and by ensuring that digital geographic data are usable with other related Geographic Information System (GIS) data.Terminology, definitions, and procedural information are provided to ensure uniformity in hydrologic unit boundaries, names, and numerical codes. Detailed standards and specifications for data are included. The document also includes discussion of objectives, communications required for revising the data resolution in the United States and the Caribbean, as well as final review and data-quality criteria. Instances of unusual landforms or artificial features that affect the hydrologic units are described with metadata standards. Up-to-date information and availability of the hydrologic units are listed at http:// www

  8. Standardization of figures and assessment procedures for DTM verticalaccuracy

    Directory of Open Access Journals (Sweden)

    Vittorio Casella

    2015-07-01

    Full Text Available Digital Terrain Models (DTMs are widely used in many sectors. They play a key role in hydrological risk prevention, risk mitigation and numeric simulations. This paper deals with two questions: (i when it is stated that a DTM has a given vertical accuracy, is this assertion univocal? (ii when DTM vertical accuracy is assessed by means of checkpoints, does their location influence results? First, the paper illustrates that two vertical accuracy definitions are conceivable: Vertical Accuracy at the Nodes (VAN, the average vertical distance between the model and the terrain, evaluated at the DTM's nodes and Vertical Accuracy at the interpolated Points (VAP, in which the vertical distance is evaluated at the generic points. These two quantities are not coincident and, when they are calculated for the same DTM, different numeric values are reached. Unfortunately, the two quantities are often interchanged, but this is misleading. Second, the paper shows a simulated example of a DTM vertical accuracy assessment, highlighting that the checkpoints’ location plays a key role: when checkpoints coincide with the DTM nodes, VAN is estimated; when checkpoints are randomly located, VAP is estimated, instead. Third, an in-depth, theoretical characterization of the two considered quantities is performed, based on symbolic computation, and suitable standardization coefficients are proposed. Finally, our discussion has a well-defined frame: it doesn't deal with all the items of the DTM vertical accuracy budget, which would require a much longer essay, but only with one, usually called fundamental vertical accuracy.

  9. 78 FR 37452 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-06-21

    ..., 2013. John M. Allen, Director, Flight Standards Service. Adoption of the Amendment Accordingly..., Amdt 1. 7/25/13 FL Tampa Tampa Executive. 3/0405 6/6/13 ILS OR LOC RWY 23, Amdt 1. 7/25/13 FL Milton...

  10. 78 FR 25384 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-05-01

    ... from: 1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building, 800 Independence Avenue SW..., in addition to their complex nature and the need for a special format make publication in the Federal...

  11. 78 FR 64172 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-10-28

    ... from: 1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building, 800 Independence Avenue SW..., in addition to their complex nature and the need for a special format make publication in the Federal...

  12. 78 FR 64167 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-10-28

    ... from: 1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building, 800 Independence Avenue SW..., in addition to their complex nature and the need for a special format make publication in the Federal...

  13. 78 FR 68702 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-11-15

    ... from: 1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building, 800 Independence Avenue SW... ODPs, in addition to their complex nature and the need for a special format make publication in the...

  14. 78 FR 78713 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

    Science.gov (United States)

    2013-12-27

    ... from: 1. FAA Public Inquiry Center (APA-200), FAA Headquarters Building, 800 Independence Avenue SW..., in addition to their complex nature and the need for a special format make publication in the Federal...

  15. The philosophy and limitations of FAA aeromedical standards, policies and procedures.

    Science.gov (United States)

    1971-06-01

    Designated Aviation Medical Examiners need available basic information concerning the FAA medical certification system, the philosophy which underlies standards, policy and procedures, and certain limitations of the system. It is through such informa...

  16. Trends and the determination of effective doses for standard X-ray procedures

    International Nuclear Information System (INIS)

    Johnson, H.M.; Neduzak, C.; Gallet, J.; Sandeman, J.

    2001-01-01

    Trends in the entrance skin exposures (air kerma) for standard x-ray imaging procedures are reported for the Province of Manitoba, Canada. Average annual data per procedure using standard phantoms and standard ion chambers have been recorded since 1981. For example, chest air kerma (backscatter included) has decreased from 0.14 to 0.09 mGy. Confounding factors may negate the gains unless facility quality control programs are maintained. The data were obtained for a quality assurance and regulatory compliance program. Quoting such data for risk evaluation purposes lacks rigor hence a compartment model for organ apportioning, using organ absorbed doses and weighting factors, has been applied to determine effective dose per procedure. The effective doses for the standard procedures are presented, including the value of 0.027 mSv (1999) calculated for the effective dose in PA chest imaging. (author)

  17. Development of a standard operating procedure for analysis of ammonia concentrations in coal fly ash.

    Science.gov (United States)

    2015-04-01

    Research was performed to support the development and recommendation of a standard operating : procedure (SOP) for analyzing the ammonia content in fly ash intended for use in concrete. A review : of existing ash producers found that several differen...

  18. Licensing procedure, nuclear codes and standards in the Federal Republic of Germany

    International Nuclear Information System (INIS)

    Schultheiss, G.F.

    1980-01-01

    The present paper deals with legal background of licensing in nuclear technology and atomic energy use, licensing procedures for nuclear power plants and with codes, standards and guidelines in the Federal Republic of Germany. (orig./RW)

  19. Gas Chromatographic Determination of Methyl Salicylate in Rubbing Alcohol: An Experiment Employing Standard Addition.

    Science.gov (United States)

    Van Atta, Robert E.; Van Atta, R. Lewis

    1980-01-01

    Provides a gas chromatography experiment that exercises the quantitative technique of standard addition to the analysis for a minor component, methyl salicylate, in a commercial product, "wintergreen rubbing alcohol." (CS)

  20. A procedure for eliminating additive bias from cross-cultural survey data

    DEFF Research Database (Denmark)

    Scholderer, Joachim; Grunert, Klaus G.; Brunsø, Karen

    2005-01-01

    Measurement bias in cross-cultural surveys can seriously threaten the validity of hypothesis tests. Direct comparisons of means depend on the assumption that differences in observed variables reflect differences in the underlying constructs, and not an additive bias that may be caused by cultural...... differences between observed item means by unbiased estimates of the difference between "true" population means. Sampling moments are derived for the purpose of hypothesis testing. The procedure is demonstrated in a numerical example. Potential applications include comparisons of means from different cultures...

  1. 77 FR 72746 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel...

    Science.gov (United States)

    2012-12-06

    ... Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel Sulfur Programs AGENCY... Fuel Standard (``RFS'') program under section 211(o) of the Clean Air Act. The direct final rule also... marine diesel fuel produced by transmix processors, and the fuel marker requirements for 500 ppm sulfur...

  2. 78 FR 62462 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2013-10-22

    ...-AR87 Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... definition of ``heating oil'' in the regulations for the Renewable Fuel Standard (RFS) program under section 211(o) of the Clean Air Act. This amendment expands the scope of renewable fuels that can be used to...

  3. 75 FR 26049 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2010-05-10

    ... Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... Renewable Fuel Standard program regulations published on March 26, 2010, that are scheduled to take effect... INFORMATION: I. Why is EPA issuing this proposed rule? This document proposes to amend the Renewable Fuel...

  4. 77 FR 61281 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel...

    Science.gov (United States)

    2012-10-09

    ... Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel Sulfur Programs AGENCY... to amend the definition of heating oil in the Renewable Fuel Standard (``RFS'' or ``RFS2'') program under section 211(o) of the Clean Air Act. This amendment will expand the scope of renewable fuels that...

  5. 75 FR 79964 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2010-12-21

    ...-AQ31 Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... the Renewable Fuel Standard program regulations that were published on March 26, 2010, and that took..., distribution, and sale of transportation fuels, including gasoline and diesel fuel and renewable fuels such as...

  6. 77 FR 61313 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel...

    Science.gov (United States)

    2012-10-09

    ... Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel Sulfur Programs AGENCY... of heating oil in the Renewable Fuel Standard (RFS) program under section 211(o) of the Clean Air Act. This amendment would expand the scope of renewable fuels that can generate Renewable Identification...

  7. 9 CFR 354.210 - Minimum standards for sanitation, facilities, and operating procedures in official plants.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Minimum standards for sanitation, facilities, and operating procedures in official plants. 354.210 Section 354.210 Animals and Animal Products... sanitation, facilities, and operating procedures in official plants. The provisions of §§ 354.210 to 354.247...

  8. 40 CFR 75.38 - Standard missing data procedures for Hg CEMS.

    Science.gov (United States)

    2010-07-01

    ... Hg CEMS. 75.38 Section 75.38 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Standard missing data procedures for Hg CEMS. (a) Once 720 quality assured monitor operating hours of Hg... substitute data for Hg concentration in accordance with the procedures in ( 75.33(b)(1) through (b)(4...

  9. Standard addition strip for quantitative electrostatic spray ionization mass spectrometry analysis: determination of caffeine in drinks.

    Science.gov (United States)

    Tobolkina, Elena; Qiao, Liang; Roussel, Christophe; Girault, Hubert H

    2014-12-01

    Standard addition strips were prepared for the quantitative determination of caffeine in different beverages by electrostatic spray ionization mass spectrometry (ESTASI-MS). The gist of this approach is to dry spots of caffeine solutions with different concentrations on a polymer strip, then to deposit a drop of sample mixed with an internal standard, here theobromine on each spot and to measure the mass spectrometry signals of caffeine and theobromine by ESTASI-MS. This strip approach is very convenient and provides quantitative analyses as accurate as the classical standard addition method by MS or liquid chromatography. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Standard testing procedures for optical fiber and unshielded twisted pair at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Adams, R.L.

    1993-11-01

    This document will establish a working standard for testing optical fiber and unshielded twisted pair cables included in the Lab-wide telecommunications cabling system. The purpose of these standard testing procedures is to deliver to all Sandians a reliable, low-maintenance, state-of-the-art, ubiquitous telecommunications cabling infrastructure capable of satisfying all current and future telecommunication needs.

  11. EVALUASI SANITATION STANDARD OPERATING PROCEDURES KERUPUKAMPLANG DI UD SARINA KECAMATAN KALIANGET KABUPATEN SUMENEP

    Directory of Open Access Journals (Sweden)

    Ach Triharjono

    2016-11-01

    Full Text Available Industri pangan untuk menghasilkan produk yang memenuhi standar keamanan pangan. Standar tersebut dapat dipenuhi dengan menerapkan 8 aspek kunci Sanitation Standard Operating Prosedures (SSOP. Tujuan dari penelitian ini adalah untuk memperoleh hasil penerapan 8 aspek kunci Sanitation Standard Operating Procedures (SSOP dan mengevaluasi penerapan Sanitation Standard Operating Procedures (SSOP Di UD Sarina Kecamatan Kalianget Kabupaten Sumenep. Jenis penelitian ini bersifat deskriptif dengan lokasi penelitian di UD Sarina Kecamatan Kalianget Kabupaten Sumenep. Hasil penelitian diketahui bahwa penerapan 8 aspek kunci Sanitation Standard Operating Procedures (SSOP di UD Sarina sudah terlaksana tapi terdapat 3 tahapan kunci yang belum terlaksana dengan baik yaitu pencegahan kontaminasi silang, pengawasan kondisi kesehatan personil dan menghilangkan hama dari unit pengolahan. Hal yang perlu ditingkatkan terkait dengan penerapan SSOP di UD Sarina yaitu masih perlu adanya manual prosedur untuk berbagai pelaksanaan sanitasi yang dilakukan oleh UD Sarina ini

  12. A Guide for Developing Standard Operating Job Procedures for the Tertiary Chemical Treatment - Lime Precipitation Process Wastewater Treatment Facility. SOJP No. 6.

    Science.gov (United States)

    Petrasek, Al, Jr.

    This guide describes the standard operating job procedures for the tertiary chemical treatment - lime precipitation process of wastewater treatment plants. Step-by-step instructions are given for pre-start up, start-up, continuous operation, and shut-down procedures. In addition, some theoretical material is presented along with some relevant…

  13. Application of revised procedure on determining large excess reactivity of operating reactor. Fuel addition method

    International Nuclear Information System (INIS)

    Nagao, Yoshiharu

    2002-01-01

    The fuel addition method or the neutron absorption substitution method have been used for determination of large excess multiplication factor of large sized reactors. It has been pointed out, however, that all the experimental methods are possibly not free from the substantially large systematic error up to 20%, when the value of the excess multiplication factor exceeds about 15%Δk. Then, a basic idea of a revised procedure was proposed to cope with the problem, which converts the increase of multiplication factor in an actual core to that in a virtual core by calculation, because its value is in principle defined not for the former but the latter core. This paper proves that the revised procedure is able to be applicable for large sized research and test reactors through the theoretical analyses on the measurements undertaken at the JMTRC and JMTR cores. The values of excess multiplication factor are accurately determined utilizing the whole core calculation by the Monte Carlo code MCNP4A. (author)

  14. 75 FR 26025 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2010-05-10

    ... Part IV Environmental Protection Agency 40 CFR Part 80 Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program; Final Rule and Proposed Rule #0;#0;Federal Register / Vol. 75... AGENCY 40 CFR Part 80 [EPA-HQ-OAR-2005-0161; FRL-9147-6] RIN 2060-AQ31 Regulation of Fuels and Fuel...

  15. 76 FR 18066 - Regulation of Fuels and Fuel Additives: Changes to Renewable Fuel Standard Program

    Science.gov (United States)

    2011-04-01

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 80 Regulation of Fuels and Fuel Additives: Changes to Renewable Fuel Standard Program CFR Correction In Title 40 of the Code of Federal Regulations, Parts 72 to...-generating foreign producers and importers of renewable fuels for which RINs have been generated by the...

  16. The primary exposure standard for Co-60 gamma radiation: characteristics and measurements procedures

    International Nuclear Information System (INIS)

    Laitano, R.F.; Toni, M.P.

    1983-01-01

    A description is given of a cavity ionization chamber used, as a primary exposure standard, at the Laboratorio di Metrologia delle Radiazioni Ionizzanti of the ENEA in Italy. The primary standard is designed to make absolute measurements of exposure due to the Co-60 gamma radiation. The procedures for the realizationof the exposure unit are also described. Finally results of some international comparisons are reported

  17. A standard operating procedure for the surgical implantation of transmitters in juvenile salmonids

    Science.gov (United States)

    Liedtke, T.L.; Beeman, J.W.; Gee, L.P.

    2012-01-01

    require large numbers of tagged fish. For example, a study conducted at the dams on the Columbia River and funded by the U.S. Army Corps of Engineers required tagging and monitoring of 40,000 juvenile salmon during a 3-month migration period (Counihan and others, 2006a, 2006b; Perry and others, 2006). To meet the demands of such a large study, the authors and CRRL staff refined the SOP to increase efficiency in the tagging process while maintaining high standards of fish care. The SOP has been used in laboratory and field settings for more than 15 years, and consistently has produced low mortality rates (<1 percent) and transmitter loss rates (<0.01 percent) in the 24-36 hours after tagging. In addition to describing the detailed surgical procedures required for transmitter implantation, this document provides guidance on fish collection, handling and holding, and the release of tagged fish. Although often overlooked, or at least underemphasized, these processes can have a large impact on the outcome of the tagging procedure. Stress associated with the individual steps in handling and tagging can be cumulative and lethal (Maule and others, 1988; Wedemeyer and others, 1990; Portz and others, 2006), so the goal is to provide the best possible fish care at every step in order to manage the overall effect on study fish.

  18. Standard operating procedures for female orgasmic disorder: consensus of the International Society for Sexual Medicine

    NARCIS (Netherlands)

    Laan, Ellen; Rellini, Alessandra H.; Barnes, Tricia

    2013-01-01

    As the field of sexual medicine evolves, it is important to continually improve patient care by developing contemporary "standard operating procedures" (SOPs), reflecting the consensus view of experts in sexual medicine. Few, if any, consensus SOPs have been developed for the diagnosis and treatment

  19. Procedure-related mortality of endovascular abdominal aortic aneurysm repair using revised reporting standards.

    NARCIS (Netherlands)

    Konig, G.G.; Vallabhneni, S.R.; Marrewijk, C.J. van; Leurs, L.J.; Laheij, R.J.F.; Buth, J.

    2007-01-01

    OBJECTIVE: The aim of this study was to evaluate the definition of Procedure-related mortality after endovascular aneurysm repair (EVAR) as defined by the Committee for Standardized Reporting Practices in Vascular Surgery. METHODS: Data on patients with an AAA were taken from the EUROSTAR database.

  20. Evolution of standardized procedures for adjusting lumber properties for change in moisture content

    Science.gov (United States)

    David W. Green; James W. Evans

    2001-01-01

    This paper documents the development of procedures in American Society for Testing and Materials standards for adjusting the allowable properties of lumber for changes in moisture content. The paper discusses the historical context of efforts to establish allowable properties on a consensus basis, beginning in the 19th century. Where possible, the reasons for proposed...

  1. Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis (French Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

  2. Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis (Spanish Edition)

    International Nuclear Information System (INIS)

    2017-01-01

    Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

  3. Qualitative research within trials: developing a standard operating procedure for a clinical trials unit

    Science.gov (United States)

    2013-01-01

    Background Qualitative research methods are increasingly used within clinical trials to address broader research questions than can be addressed by quantitative methods alone. These methods enable health professionals, service users, and other stakeholders to contribute their views and experiences to evaluation of healthcare treatments, interventions, or policies, and influence the design of trials. Qualitative data often contribute information that is better able to reform policy or influence design. Methods Health services researchers, including trialists, clinicians, and qualitative researchers, worked collaboratively to develop a comprehensive portfolio of standard operating procedures (SOPs) for the West Wales Organisation for Rigorous Trials in Health (WWORTH), a clinical trials unit (CTU) at Swansea University, which has recently achieved registration with the UK Clinical Research Collaboration (UKCRC). Although the UKCRC requires a total of 25 SOPs from registered CTUs, WWORTH chose to add an additional qualitative-methods SOP (QM-SOP). Results The qualitative methods SOP (QM-SOP) defines good practice in designing and implementing qualitative components of trials, while allowing flexibility of approach and method. Its basic principles are that: qualitative researchers should be contributors from the start of trials with qualitative potential; the qualitative component should have clear aims; and the main study publication should report on the qualitative component. Conclusions We recommend that CTUs consider developing a QM-SOP to enhance the conduct of quantitative trials by adding qualitative data and analysis. We judge that this improves the value of quantitative trials, and contributes to the future development of multi-method trials. PMID:23433341

  4. Qualitative research within trials: developing a standard operating procedure for a clinical trials unit.

    Science.gov (United States)

    Rapport, Frances; Storey, Mel; Porter, Alison; Snooks, Helen; Jones, Kerina; Peconi, Julie; Sánchez, Antonio; Siebert, Stefan; Thorne, Kym; Clement, Clare; Russell, Ian

    2013-02-21

    Qualitative research methods are increasingly used within clinical trials to address broader research questions than can be addressed by quantitative methods alone. These methods enable health professionals, service users, and other stakeholders to contribute their views and experiences to evaluation of healthcare treatments, interventions, or policies, and influence the design of trials. Qualitative data often contribute information that is better able to reform policy or influence design. Health services researchers, including trialists, clinicians, and qualitative researchers, worked collaboratively to develop a comprehensive portfolio of standard operating procedures (SOPs) for the West Wales Organisation for Rigorous Trials in Health (WWORTH), a clinical trials unit (CTU) at Swansea University, which has recently achieved registration with the UK Clinical Research Collaboration (UKCRC). Although the UKCRC requires a total of 25 SOPs from registered CTUs, WWORTH chose to add an additional qualitative-methods SOP (QM-SOP). The qualitative methods SOP (QM-SOP) defines good practice in designing and implementing qualitative components of trials, while allowing flexibility of approach and method. Its basic principles are that: qualitative researchers should be contributors from the start of trials with qualitative potential; the qualitative component should have clear aims; and the main study publication should report on the qualitative component. We recommend that CTUs consider developing a QM-SOP to enhance the conduct of quantitative trials by adding qualitative data and analysis. We judge that this improves the value of quantitative trials, and contributes to the future development of multi-method trials.

  5. Calibration of photon and beta ray sources used in brachytherapy. Guidelines on standardized procedures at Secondary Standards Dosimetry Laboratories

    International Nuclear Information System (INIS)

    2004-03-01

    It has generally been recognized that international harmonization in radiotherapy dosimetry is essential. Consequently, the IAEA has given much effort to this, for example by publishing a number of reports in the Technical Reports Series (TRS) for external beam dosimetry, most notably TRS-277 and more recently TRS-398. Both of these reports describe in detail the steps to be taken for absorbed dose determination in water and they are often referred to as 'dosimetry protocols'. Similar to TRS-277, it is expected that TRS-398 will be adopted or used as a model by a large number of countries as their national protocol. In 1996, the IAEA established a calibration service for low dose rate (LDR) 137 Cs brachytherapy sources, which is the most widely used source for treatment of gynecological cancer. To further enhance harmonization in brachytherapy dosimetry, the IAEA published in 1999 IAEA-TECDOC-1079 entitled 'Calibration of Brachytherapy Sources. Guidelines on Standardized Procedures for the Calibration of Brachytherapy Sources at Secondary Standard Dosimetry Laboratories (SSDLs) and Hospitals'. The report was well received and was distributed in a large number of copies to the members of the IAEA/WHO network of SSDLs and to medical physicists working with brachytherapy. The present report is an update of the aforementioned TECDOC. Whereas TECDOC-1079 described methods for calibrating brachytherapy sources with photon energies at or above those of 192 Ir, the current report has a wider scope in that it deals with standardization of calibration of all the most commonly used brachytherapy sources, including both photon and beta emitting sources. The latter sources have been in use for a few decades already, but their calibration methods have been unclear. Methods are also described for calibrating sources used in the rapidly growing field of cardiovascular angioplasty. In this application, irradiation of the vessel wall is done in an attempt to prevent restenosis after

  6. Procedures and Standards for Residential Ventilation System Commissioning: An Annotated Bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Stratton, J. Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-04-01

    Beginning with the 2008 version of Title 24, new homes in California must comply with ANSI/ASHRAE Standard 62.2-2007 requirements for residential ventilation. Where installed, the limited data available indicate that mechanical ventilation systems do not always perform optimally or even as many codes and forecasts predict. Commissioning such systems when they are installed or during subsequent building retrofits is a step towards eliminating deficiencies and optimizing the tradeoff between energy use and acceptable IAQ. Work funded by the California Energy Commission about a decade ago at Berkeley Lab documented procedures for residential commissioning, but did not focus on ventilation systems. Since then, standards and approaches for commissioning ventilation systems have been an active area of work in Europe. This report describes our efforts to collect new literature on commissioning procedures and to identify information that can be used to support the future development of residential-ventilation-specific procedures and standards. We recommend that a standardized commissioning process and a commissioning guide for practitioners be developed, along with a combined energy and IAQ benefit assessment standard and tool, and a diagnostic guide for estimating continuous pollutant emission rates of concern in residences (including a database that lists emission test data for commercially-available labeled products).

  7. Standard operating procedures improve acute neurologic care in a sub-Saharan African setting.

    Science.gov (United States)

    Jaiteh, Lamin E S; Helwig, Stefan A; Jagne, Abubacarr; Ragoschke-Schumm, Andreas; Sarr, Catherine; Walter, Silke; Lesmeister, Martin; Manitz, Matthias; Blaß, Sebastian; Weis, Sarah; Schlund, Verena; Bah, Neneh; Kauffmann, Jil; Fousse, Mathias; Kangankan, Sabina; Ramos Cabrera, Asmell; Kronfeld, Kai; Ruckes, Christian; Liu, Yang; Nyan, Ousman; Fassbender, Klaus

    2017-07-11

    Quality of neurologic emergency management in an under-resourced country may be improved by standard operating procedures (SOPs). Neurologic SOPs were implemented in a large urban (Banjul) and a small rural (Brikama) hospital in the Gambia. As quality indicators of neurologic emergency management, performance of key procedures was assessed at baseline and in the first and second implementation years. At Banjul, 100 patients of the first-year intervention group exhibited higher rates of general procedures of emergency management than 105 control patients, such as neurologic examination (99.0% vs 91.4%; p process quality of neurologic emergency management in under-resourced settings. This study provides Class IV evidence that, for patients with suspected neurologic emergencies in sub-Saharan Africa, neurologic SOPs increase the rate of performance of guideline-recommended procedures. Copyright © 2017 The Author(s). Published by Wolters Kluwer Health, Inc. on behalf of the American Academy of Neurology.

  8. Standard procedures for adults in accredited sleep medicine centres in Europe

    DEFF Research Database (Denmark)

    Fischer, Jürgen; Dogas, Zoran; Bassetti, Claudio L

    2012-01-01

    The present paper describes standardized procedures within clinical sleep medicine. As such, it is a continuation of the previously published European guidelines for the accreditation of sleep medicine centres and European guidelines for the certification of professionals in sleep medicine, aimed...... and quality assurance of sleep medicine in Europe....... at creating standards of practice in European sleep medicine. It is also part of a broader action plan of the European Sleep Research Society, including the process of accreditation of sleep medicine centres and certification of sleep medicine experts, as well as publishing the Catalogue of Knowledge...... and Skills for sleep medicine experts (physicians, non-medical health care providers, nurses and technologists), which will be a basis for the development of relevant educational curricula. In the current paper, the standard operational procedures sleep medicine centres regarding the diagnostic...

  9. A Guide for Developing Standard Operating Job Procedures for the Pump Station Process Wastewater Treatment Facility. SOJP No. 3.

    Science.gov (United States)

    Perley, Gordon F.

    This is a guide for standard operating job procedures for the pump station process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up procedures, continuous routine operation procedures, and shut-down procedures. A general description of the equipment used in the process is given. Two…

  10. 21 CFR 130.20 - Food additives proposed for use in foods for which definitions and standards of identity are...

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Food additives proposed for use in foods for which...: GENERAL Food Additives in Standardized Foods § 130.20 Food additives proposed for use in foods for which... the act, which proposes the inclusion of a food additive in such definition and standard of identity...

  11. Appearance of discontinuities in spectra transformed by the piecewise direct instrument standardization procedure.

    Science.gov (United States)

    Gemperline, P J; Cho, J; Aldridge, P K; Sekulic, S S

    1996-09-01

    Several years ago, we noted that spectra transformed by the piecewise direct standardization (PDS) method may contain discontinuities. Having noticed that the problem was a recurring one, we studied it and recently diagnosed its source. Our investigations suggest that this problem also occurs in applications of window factor analysis, evolving factor analysis, and any other procedure that uses piecewise principal component models. In this work, we report the source of the problem and illustrate it with one example. A procedure is presented for eliminating the problem that is effective in PDS pattern recognition applications. Further work is needed to develop modified algorithms suitable for calibration applications.

  12. Standardizing the classification of abortion incidents: the Procedural Abortion Incident Reporting and Surveillance (PAIRS) Framework.

    Science.gov (United States)

    Taylor, Diana; Upadhyay, Ushma D; Fjerstad, Mary; Battistelli, Molly F; Weitz, Tracy A; Paul, Maureen E

    2017-07-01

    To develop and validate standardized criteria for assessing abortion-related incidents (adverse events, morbidities, near misses) for first-trimester aspiration abortion procedures and to demonstrate the utility of a standardized framework [the Procedural Abortion Incident Reporting & Surveillance (PAIRS) Framework] for estimating serious abortion-related adverse events. As part of a California-based study of early aspiration abortion provision conducted between 2007 and 2013, we developed and validated a standardized framework for defining and monitoring first-trimester (≤14weeks) aspiration abortion morbidity and adverse events using multiple methods: a literature review, framework criteria testing with empirical data, repeated expert reviews and data-based revisions to the framework. The final framework distinguishes incidents resulting from procedural abortion care (adverse events) from morbidity related to pregnancy, the abortion process and other nonabortion related conditions. It further classifies incidents by diagnosis (confirmatory data, etiology, risk factors), management (treatment type and location), timing (immediate or delayed), seriousness (minor or major) and outcome. Empirical validation of the framework using data from 19,673 women receiving aspiration abortions revealed almost an equal proportion of total adverse events (n=205, 1.04%) and total abortion- or pregnancy-related morbidity (n=194, 0.99%). The majority of adverse events were due to retained products of conception (0.37%), failed attempted abortion (0.15%) and postabortion infection (0.17%). Serious or major adverse events were rare (n=11, 0.06%). Distinguishing morbidity diagnoses from adverse events using a standardized, empirically tested framework confirms the very low frequency of serious adverse events related to clinic-based abortion care. The PAIRS Framework provides a useful set of tools to systematically classify and monitor abortion-related incidents for first

  13. Standard guidelines of care: Performing procedures in patients on or recently administered with isotretinoin

    Directory of Open Access Journals (Sweden)

    Venkataram Mysore

    2017-01-01

    Full Text Available Background: Currently, the standard protocol regarding the performance of procedures on patients receiving or having recently received isotretinoin (13-cis-retinoic acid states that the procedures should not be performed. The recommendations in standard books and drug insert require discontinuation of isotretinoin for 6 months before performing cosmetic procedures, including waxing, dermabrasion, chemical peels, laser procedures, or incisional and excisional cold-steel surgery. These recommendations have been followed for over two decades despite little evidence for the stated increased risk of scarring. Objective: The Association of Cutaneous Surgeons (I constituted a task force to review the evidence and to recommend consensus guidelines regarding the safety of skin procedures, including resurfacing, energy-device treatments, and dermatosurgical procedures in patients with concurrent or recent isotretinoin administration. Materials and Methods: Data were extracted from the literature through a PubMed search using the keywords “isotretinoin,” “safety,” “scarring,” “keloids,” “hypertrophic scarring,” and “pigmentation.” The evidence was then labeled and circulated to all members of task force for review. Results: The task force is of the opinion that there is insufficient evidence to support the current protocol of avoiding and delaying treatments in the patient group under consideration and recommends that the current practice should be discontinued.The task force concludes that performing procedures such as laser hair removal, fractional lasers for aging and acne scarring, lasers for pigmented skin lesions, fractional radio-frequency microneedling, superficial and medium-depth peels, microdermabrasion, dermaroller, biopsies, radio-frequency ablation, and superficial excisions is safe in patients with concurrent or recent isotretinoin administration.

  14. Standard operating procedure changed pre-hospital critical care anaesthesiologists’ behaviour: a quality control study

    Science.gov (United States)

    2013-01-01

    Introduction The ability of standard operating procedures to improve pre-hospital critical care by changing pre-hospital physician behaviour is uncertain. We report data from a prospective quality control study of the effect on pre-hospital critical care anaesthesiologists’ behaviour of implementing a standard operating procedure for pre-hospital controlled ventilation. Materials and methods Anaesthesiologists from eight pre-hospital critical care teams in the Central Denmark Region prospectively registered pre-hospital advanced airway-management data according to the Utstein-style template. We collected pre-intervention data from February 1st 2011 to January 31st 2012, implemented the standard operating procedure on February 1st 2012 and collected post intervention data from February 1st 2012 until October 31st 2012. We included transported patients of all ages in need of controlled ventilation treated with pre-hospital endotracheal intubation or the insertion of a supraglottic airways device. The objective was to evaluate whether the development and implementation of a standard operating procedure for controlled ventilation during transport could change pre-hospital critical care anaesthesiologists’ behaviour and thereby increase the use of automated ventilators in these patients. Results The implementation of a standard operating procedure increased the overall prevalence of automated ventilator use in transported patients in need of controlled ventilation from 0.40 (0.34-0.47) to 0.74 (0.69-0.80) with a prevalence ratio of 1.85 (1.57-2.19) (p = 0.00). The prevalence of automated ventilator use in transported traumatic brain injury patients in need of controlled ventilation increased from 0.44 (0.26-0.62) to 0.85 (0.62-0.97) with a prevalence ratio of 1.94 (1.26-3.0) (p = 0.0039). The prevalence of automated ventilator use in patients transported after return of spontaneous circulation following pre-hospital cardiac arrest increased from 0.39 (0

  15. Standard Evaluation Procedures (SEPs) and Data Entry Spreadsheet Templates (DESTs) for Endocrine Disruptor Screening Program (EDSP) Tier 1 Assays

    Science.gov (United States)

    This page provides information and access to Standard Evaluation Procedures (SEPs) and Data Entry Spreadsheet Templates (DESTs) developed by EPA's Office of Chemical Safety and Pollution Prevention (OCSPP).

  16. Worldwide review of existing standards and procedures for monitoring and analysing dam deformations

    International Nuclear Information System (INIS)

    Chrzanowski, A.; Avella, S.; Frodge, S.L.

    1993-01-01

    A study was carried out of existing standards and procedures for dam monitoring worldwide. The survey covers worldwide distribution of large dams, dam failures and dam safety legislation, required accuracy and frequency of monitoring surveys, and geometrical analysis of dam deformations. Information is tabulated, on a per-country basis, of number of dam types, actual or preferred method of monitoring, dam safety legislation in place, standards and specifications for monitoring, whether automation of monitoring is included, whether geodetic systems have been designed, and sample specifications for monitoring concrete dams as recommended by the Swiss National Committee on Large Dams. 29 refs., 3 tabs

  17. Detection Procedure for a Single Additive Outlier and Innovational Outlier in a Bilinear Model

    Directory of Open Access Journals (Sweden)

    Azami Zaharim

    2007-01-01

    Full Text Available A single outlier detection procedure for data generated from BL(1,1,1,1 models is developed. It is carried out in three stages. Firstly, the measure of impact of an IO and AO denoted by IO ω , AO ω , respectively are derived based on least squares method. Secondly, test statistics and test criteria are defined for classifying an observation as an outlier of its respective type. Finally, a general single outlier detection procedure is presented to distinguish a particular type of outlier at a time point t.

  18. Procedure and reference standard to determine the structural resolution in coordinate metrology

    Science.gov (United States)

    Illemann, Jens; Bartscher, Markus; Jusko, Otto; Härtig, Frank; Neuschaefer-Rube, Ulrich; Wendt, Klaus

    2014-06-01

    A new procedure and reference standards for specifying the structural resolution in coordinate metrology traceable to the SI unit the metre are proposed. With the definition of the structural resolution, a significant gap will be closed to complete ‘acceptance and verification tests’ of the coordinate measuring systems (CMSs) which are specified in the ISO 10360 series dealing with tactile sensors, optical sensors, and x-ray computed tomography measurement systems (CTs). The proposed new procedure uses reference standards with circular rounded edges. The idea is to measure the radius of curvature on a calibrated round edge structure. From the deviation between the measured and the calibrated radius, an analogue Gaussian broadening of the measurement system is determined. This value is a well-defined and easy-to-apply measure to define the structural resolution for dimensional measurements. It is applicable to CMSs which are based on different sensing principles, e.g. tactile, optical and CT systems. On the other hand, it has a physical meaning similar to the classical optical point-spread function. It makes it possible to predict which smallest details the CMS is capable of measuring reliably for an arbitrary object shape. The theoretical background of the new procedure is given, an appropriate reference standard is described and comparative, quantitative measurement data of CMSs featuring different sensors are shown.

  19. Number Words in Young Children's Conceptual and Procedural Knowledge of Addition, Subtraction and Inversion

    Science.gov (United States)

    Canobi, Katherine H.; Bethune, Narelle E.

    2008-01-01

    Three studies addressed children's arithmetic. First, 50 3- to 5-year-olds judged physical demonstrations of addition, subtraction and inversion, with and without number words. Second, 20 3- to 4-year-olds made equivalence judgments of additions and subtractions. Third, 60 4- to 6-year-olds solved addition, subtraction and inversion problems that…

  20. Paving the way for a gold standard of care for infertility treatment: improving outcomes through standardization of laboratory procedures.

    Science.gov (United States)

    Schoolcraft, William; Meseguer, Marcos

    2017-10-01

    Infertility affects over 70 million couples globally. Access to, and interest in, assisted reproductive technologies is growing worldwide, with more couples seeking medical intervention to conceive, in particular by IVF. Despite numerous advances in IVF techniques since its first success in 1978, almost half of the patients treated remain childless. The multifactorial nature of IVF treatment means that success is dependent on many variables. Therefore, it is important to examine how each variable can be optimized to achieve the best possible outcomes for patients. The current approach to IVF is fragmented, with various protocols in use. A systematic approach to establishing optimum best practices may improve IVF success and live birth rates. Our vision of the future is that technological advancements in the laboratory setting are standardized and universally adopted to enable a gold standard of care. Implementation of best practices for laboratory procedures will enable clinicians to generate high-quality gametes, and to produce and identify gametes and embryos of maximum viability and implantation potential, which should contribute to improving take-home healthy baby rates. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. The Use of Procedural Knowledge in Simple Addition and Subtraction Problems

    Science.gov (United States)

    Fayol, Michel; Thevenot, Catherine

    2012-01-01

    In a first experiment, adults were asked to solve one-digit additions, subtractions and multiplications. When the sign appeared 150 ms before the operands, addition and subtraction were solved faster than when the sign and the operands appeared simultaneously on screen. This priming effect was not observed for multiplication problems. A second…

  2. 40 CFR 75.33 - Standard missing data procedures for SO2, NOX, Hg, and flow rate.

    Science.gov (United States)

    2010-07-01

    ... SO2, NOX, Hg, and flow rate. 75.33 Section 75.33 Protection of Environment ENVIRONMENTAL PROTECTION... Procedures § 75.33 Standard missing data procedures for SO2, NOX, Hg, and flow rate. (a) Following initial...—Missing Data Procedure for SO2 CEMS, CO2 CEMS, Moisture CEMS, Hg CEMS, and Diluent (CO2 or O2) Monitors...

  3. The Economic Impact on the Construction Industry of Additional Demands Caused by New Environmental Protection Standards (1972)

    Science.gov (United States)

    New facilities and additions to existing facilities will be required to meet the EPA's new (early 1970s) environmental quality standards. The report examines extent of these additional demands for construction and their economic impacts.

  4. Addendum to the procedure of KWU standard calculation for PWR fuel assembly with gadolinium

    International Nuclear Information System (INIS)

    Andrade, E.P. de

    1993-01-01

    The objective of this work is to solve a doubt appeared in the standard procedure of KWU/Siemens for fuel assembly (FA) with gadolinium. In this procedure, the σ's and form functions of such assembly are modified by his effective heterogeneity factor factor (f eff ), which is defined as the ratio between the heterogeneity factors (f het ) of FA's with and without poison. The doubt appeared at the time to calculated the f het of FA without poison: should one consider the pure FA or the FA with poison in which the concentration of gadolinium would be set to zero, but one should keep that of natural uranium? The best results were obtained considering the second hypothesis. (author)

  5. Refractory Metal Heat Pipe Life Test - Test Plan and Standard Operating Procedures

    Science.gov (United States)

    Martin, J. J.; Reid, R. S.

    2010-01-01

    Refractory metal heat pipes developed during this project shall be subjected to various operating conditions to evaluate life-limiting corrosion factors. To accomplish this objective, various parameters shall be investigated, including the effect of temperature and mass fluence on long-term corrosion rate. The test series will begin with a performance test of one module to evaluate its performance and to establish the temperature and power settings for the remaining modules. The performance test will be followed by round-the-clock testing of 16 heat pipes. All heat pipes shall be nondestructively inspected at 6-month intervals. At longer intervals, specific modules will be destructively evaluated. Both the nondestructive and destructive evaluations shall be coordinated with Los Alamos National Laboratory. During the processing, setup, and testing of the heat pipes, standard operating procedures shall be developed. Initial procedures are listed here and, as hardware is developed, will be updated, incorporating findings and lessons learned.

  6. Assessment of organ doses by standard X-ray procedures in the GDR

    International Nuclear Information System (INIS)

    Tautz, M.; Brandt, G.A.

    1986-01-01

    A modern method has been described to assess the radiation burden by X-ray procedures with consideration of the standards of our Society for Medical Radiology in the GDR. The underlying methodology is a Monte Carlo computer technique, which simulates stochastically the energy deposition of X-ray photons in a mathematically described heterogeneous anthropomorphic phantom by Rosenstein (US Department of Health, Education and Welfare). To apply the procedure specific values for the following parameters must be determined for each dose estimation: projection and view, X-ray field size and location entrance exposure at skin surface, beam quality, source-to-image receptor distance. The base data are obtained in terms of tissue-air ratio. Organ doses were calculated for chest, urography, skull, cervical spine, thoracic spine, lumbar spine, pelvis and lymphography. Concluding possibilities have been discussed for reduction of radiation burden. 9 refs., 6 figs., 9 tabs. (author)

  7. An Additional Prior Retrieval Alters the Effects of a Retrieval-Extinction Procedure on Recent and Remote Fear Memory

    Directory of Open Access Journals (Sweden)

    Xianli An

    2018-01-01

    Full Text Available Several studies have shown that the isolated retrieval of a consolidated fear memory can induce a labile phase, during which extinction training can prevent the reinstatement, a form of relapse in which fear response to a fear-provoking context returns when a mild shock is presented. However, fear memory retrieval may also have another opposing result: the enhancement of fear memory. This implies that the fear memory trace can be modified by a brief retrieval. Unclear is whether the fear-impairing effect of retrieval-extinction (RE is altered by a prior brief retrieval. The present study investigated the responses of recent and remote fear memories to the RE procedure after the presentation of an additional prior retrieval (priRet. We found that a single RE procedure effectively blocked the reinstatement of 2-day recent contextual fear memory. The memory-impairing effect of the RE procedure on recent fear was not observed when priRet was presented 6 or 24 h before the RE procedure. In contrast to the 2-day recent memory, the RE procedure failed to block the reinstatement of 36-day remote fear memory but successfully disrupted the return of remote fear memory after priRet. This memory-disruptive effect on remote memory did not occur when priRet was performed in a novel context. Nimodipine administration revealed that the blockade of priRet-induced processes recovered the effects of the RE procedure on both recent and remote fear memories. Our findings suggest that the susceptibility of recent and remote fear memories to RE procedures can be altered by an additional retrieval.

  8. Chinese consensus statement on standard procedure and perioperative management of bronchial thermoplasty.

    Science.gov (United States)

    Lin, Jiangtao; Nong, Ying; Yang, Dong; Li, Shiyue; Wang, Guangfa; Su, Nan; Zhong, Nanshan

    2017-12-01

    Bronchial thermoplasty (BT) is a non-pharmacologic therapy for severe asthma. The proper procedure and perioperative management are very important for the effectiveness and safety of BT. China Asthma Alliance assembled a group of experts in asthma and BT to review the literature, drew on their own experiences, discussed, and then finalized by consensus to establish this standard practice guideline. This practice guideline is designed to guide clinicians as to proper patients' selection, preoperative assessment, postoperative management and follow-up. This practice guideline also proposed "China Alair System Registry Study (NCT02206269)" as the real-world study to enhance clinical utility of BT.

  9. New Serbian criminal procedure: New reasons for harmonization with European legal standards

    Directory of Open Access Journals (Sweden)

    Đurđić Vojislav

    2014-01-01

    Full Text Available The new criminal procedure, set forth in 2011, represents a compilation of the inquisitive model of preliminary proceedings, on the one hand, and adversarial trial of the Anglo-American type of criminal procedure on the other. Introduction of the public prosecutor's investigation required a subtle legislative approach to the protection of human rights in criminal proceedings, in order to establish equilibrium between efficient and just procedure. Instead of the expected, the erroneous conception based on the ideas that the public prosecutor's investigation should be strictly formal as that of a court, that evidence taken by the non-judicial authorities should have the same bearing as those taken by the courts, and that the court should have no role in conducting investigation, resulted in an overly inferior position of the accuses compared to that of the public prosecutor. Beside the fact that such conception can not pass the ECJ test, the specific legal solutions referring the investigation open the question of harmonization with the European legal standards. The provisions on initiation of this phase of the proceedings, not being legally sanctioned, put in question the right of the accused to access justice, as well as his right to an effective legal remedy, and the introduced investigation against the unknown perpetrator, the right to be present at one's own trial is being jeopardized. Neither do all procedural rules pertaining to the trial support the fair procedure principle: the indirect extortion of evidence from the defense is discordant with the rule that the burden of proof lies on the prosecutor, as one of the main pillars of the assumption of innocence; as well as the broad opportunity to use non-judicial evidence at the hearing without any major legal obstacles, have demolished the principles of directness and contradictoriness. Even some of the minimal right of the defense as well as the guarantees of personal freedom in the course

  10. SURF: Taking Sustainable Remediation from Concept to Standard Operating Procedure (Invited)

    Science.gov (United States)

    Smith, L. M.; Wice, R. B.; Torrens, J.

    2013-12-01

    Over the last decade, many sectors of industrialized society have been rethinking behavior and re-engineering practices to reduce consumption of energy and natural resources. During this time, green and sustainable remediation (GSR) has evolved from conceptual discussions to standard operating procedure for many environmental remediation practitioners. Government agencies and private sector entities have incorporated GSR metrics into their performance criteria and contracting documents. One of the early think tanks for the development of GSR was the Sustainable Remediation Forum (SURF). SURF brings together representatives of government, industry, consultancy, and academia to parse the means and ends of incorporating societal and economic considerations into environmental cleanup projects. Faced with decades-old treatment programs with high energy outputs and no endpoints in sight, a small group of individuals published the institutional knowledge gathered in two years of ad hoc meetings into a 2009 White Paper on sustainable remediation drivers, practices, objectives, and case studies. Since then, SURF has expanded on those introductory topics, publishing its Framework for Integrating Sustainability into Remediation Projects, Guidance for Performing Footprint Analyses and Life-Cycle Assessments for the Remediation Industry, a compendium of metrics, and a call to improve the integration of land remediation and reuse. SURF's research and members have also been instrumental in the development of additional guidance through ASTM International and the Interstate Technology and Regulatory Council. SURF's current efforts focus on water reuse, the international perspective on GSR (continuing the conversations that were the basis of SURF's December 2012 meeting at the National Academy of Sciences in Washington, DC), and ways to capture and evaluate the societal benefits of site remediation. SURF also promotes and supports student chapters at universities across the US

  11. Improving International Standards in Surgical and Procedural Training through Comparative Operative Log Growth Charts

    Directory of Open Access Journals (Sweden)

    Vannipa Vathanophas, M.D.

    2018-03-01

    Full Text Available Objective: To use these growth charts to critically assess sufficiency of cases and parity of cases between residents, and to compare these growth charts to available international standards for minimum case numbers. Methods: Operative Log Growth Charts were developed for key indicator procedures for graduating otolaryngology residents in 2012-2014 at a large teaching hospital in the capital city of a newly industrialized country. Comparisons were made between years of training and required minimum case numbers published by the ACGME RRC for Otolaryngology. Results: Data was available to create 7 key indicator operative log growth charts to include all available data from 2012-2014 residents. These growth charts were used to assess growth in operative procedures for residents in the program compared to historical norms in the program. Graduating residents surpassed ACGME minimum case numbers in Bronchoscopy only and were below the minimum numbers for the other key indicators tested. Conclusion: There is significant heterogeneity in the standards for otolaryngology training between countries. It is possible to develop program-specific and country-specific operative log growth charts.

  12. The Cox-maze IV procedure in its second decade: still the gold standard?

    Science.gov (United States)

    Ruaengsri, Chawannuch; Schill, Matthew R; Khiabani, Ali J; Schuessler, Richard B; Melby, Spencer J; Damiano, Ralph J

    2018-04-01

    Atrial fibrillation (AF) is the most common cardiac arrhythmia and the treatment options include medical treatment and catheter-based or surgical interventions. AF is a major cause of stroke, and its prevalence is increasing. The surgical treatment of AF has been revolutionized over the past 2 decades through surgical innovation and improvements in endoscopic imaging, ablation technology and surgical instrumentation. The Cox-maze (CM) procedure, which was developed by James Cox and introduced clinically in 1987, is a procedure in which multiple incisions are created in both the left and the right atria to eliminate AF while allowing the sinus impulse to reach the atrioventricular node. This procedure became the gold standard for the surgical treatment of AF. Its latest iteration is termed the CM IV and was introduced in 2002. The CM IV replaced the previous cut-and-sew method (CM III) by replacing most of the incisions with a combination of bipolar radiofrequency and cryoablation. The use of ablation technologies, made the CM IV technically easier, faster and more amenable to minimally invasive approaches. The aims of this article are to review the indications and preoperative planning for the CM IV, to describe the operative technique and to review the literature including comparisons of the CM IV with the previous cut-and-sew method. Finally, this review explores future directions for the surgical treatment of patients with AF.

  13. The advantages of using standardized review procedures in certifying type B radioactive material packages

    International Nuclear Information System (INIS)

    Easton, E.P.; Faille, S.

    2004-01-01

    This paper presents the advantages of adopting well-documented standardized review practices for reviewing Type B package designs. The US experience using standardized review plans and guidance has shown them to be a valuable tool in achieving more consistent and efficient package reviews, in training and qualifying technical reviewers, and in enhancing public and industry understanding of the package certification process. In addition, the standardized review practices, as living documents, have proven to be an effective method of incorporating new technical advances into the review process, and have provided a vehicle to make that knowledge widely available to fellow reviewers, the public and industry. Canada implemented a new internal review process in early 2003 to standardize the review of applications for certification of Type B Packages. Based on the similarity of these approaches, the United States and Canada have started discussions on a A North American System for the unilateral approval of Type B (U) packages. This initiative is looking into how each country is currently reviewing transportation package applications to see if agreement can be reached on accepting Type B certifications on a reciprocal basis, i.e., without additional review. Based on the experience in Canada and the United States, the authors believe that the use of standardized review processes, coupled with the knowledge and experience resident in IAEA's Transportation Advisory Material (TS-G-1.1) and series of TECDOCS, could also be used to develop a standard internationally accepted review process that could enhance the acceptance of unilateral approvals for Type B packages

  14. Development of a standard operating procedure for mammography equipment used in calibration of ionized chambers

    International Nuclear Information System (INIS)

    Rodrigues, Yklys Santos; Potiens, Maria da Penha Albuquerque

    2011-01-01

    Mammography is one widely used technique in the detection of breast cancer. In order to optimize the results achieving better images with lower dose rates, a quality assurance programme must be applied to the equipment. Some control tests use ionization chambers to measure air kerma and other quantities. These tests can only be reliable if the ionization chambers used on them are correctly calibrated. In the present work, it was developed a standard operating procedure (SOP) for quality control tests in a commercial mammography equipment installed in the Calibration Laboratory (LCI) at IPEN - Brazilian Institute for energy and nuclear research). Seven tests were performed in the equipment: Tube voltage and exposition time accuracy and reproducibility, linearity and reproducibility of Air kerma and Half Value Layer (HVL). Then, it was made a measurement of the air kerma in the mammography equipment, using a reference ionization chamber with traceability to a primary laboratory in Germany (Physikalisch-Technische Bundesanstalt - PTB), that was later compared with the air kerma measured in an industrial irradiator. This industrial X-ray generator was recently used in the implementation of X-radiation Standards beams, mammography level, following the Standard IEC 61267. The HVL values varied from 0.36 (25kV) to 0.41 mmA1 (35kV), and the measured air kerma rates were between 9.78 and 17.97 mGy/min. (author)

  15. Primary calibration of TXRF in comparison with the standard droplet procedure

    International Nuclear Information System (INIS)

    Dobler, M.; Reus, U.; Knoth, J.; Schwenke, H.

    2000-01-01

    For the determination of contamination on wafer surfaces with total reflection x-ray fluorescence spectrometry (TXRF) normally external 1 ng Ni droplet standards were used for calibration. This method is based on several assumptions about the properties of the standard droplet which are strongly affected by the preparation of the samples. In this paper a study is resented which compares the external droplet method with a calibration procedure using the fundamental physical background of total reflection x-ray fluorescence spectrometry and the properties of Ni bulk material. The particular features of the two methods will be discussed and the obtained results compared to each other. It is demonstrated in this study that the calibration with Ni bulk material is a primary method which offers several advantages compared to the calibration based on droplet standards. These advantages are unique and enable a more reliable and reproducible quantification of contamination on wafer surfaces. This is caused by the fact that the method is standardless and only based on fundamental parameters and natural constants. It is also demonstrated that effects which could be caused by especial features of the measured samples (particle or film, e.g.) or by the degradation of the calibration sample could be excluded. (author)

  16. Influence of new customs procedures and logistic security standards on companies competiveness – a Croatian company case study

    Directory of Open Access Journals (Sweden)

    Aleksandar Erceg

    2014-12-01

    Full Text Available In today’s global market, companies are constantly confronted with the competition on the local, national and international level. Companies therefore use a variety of strategies and tools to become and/or remain competitive. Potential areas for cost reduction in companies are supply chain management and logistic and customs procedures. Implementation of various logistic standards in supply chain management can provide significant cost savings for the company’s daily operations and thus reduce overall costs and improve the competitiveness. Using different customs procedures and logistic standards to reduce their costs and become more competitive in the market is necessary for Croatian companies. The method of using these tools is not a one-time process and requires constant efforts. Companies therefore have to be ready to improve daily to be and remain competitive. Using a variety of modern customs procedures can save their money and time, not only through these procedures, but also through better use of their employee’s time, their own vehicles and other equipment. The paper analyzes various customs procedures and logistic standards that can help companies save time and money and improve their competitiveness. In the example of Croatian company, which uses various available procedures and standards the benefits of their use are shown. Apart from bringing savings in operations, all these procedures and standards allow the company to be better, cheaper and more attractive to buyers.

  17. A Guide for Developing Standard Operating Job Procedures for the Grit Removal Process Wastewater Treatment Facility. SOJP No. 2.

    Science.gov (United States)

    Deal, Gerald A.; Montgomery, James A.

    This guide describes standard operating job procedures for the grit removal process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up, continuous operation, and shut-down procedures. A description of the equipment used in the process is given. Some theoretical material is presented. (BB)

  18. Standard manufacturing procedure for syrup and tablet forms of Jwarahara Dashemani

    Science.gov (United States)

    Kalsariya, Bharat D.; Patgiri, B. J.; Prajapati, P. K.

    2010-01-01

    Jwarahara Dashemani (JHD) is mentioned by Acharya Charaka under the different categories of Mahakashayas (groups of drugs having similar pharmacological actions). For the present study, syrup and tablet forms of JHDs were prepared and analyzed. The formulations were prepared in various batches by following the standard manufacturing procedure (SMP). JHD Kwatha (2200 ml) and 1430 g sugar candy powder were heated (80–90°C) together for 3.10 hours and 2200 ml syrup was obtained, whereas an average of 446 g of tablet was obtained from the mixture of 285 g Ghana and powder of sugar candy (125 g), JHD Dravyas (55 g) and talc (18 g). These formulations were subjected to various analytical parameters and the results were observed on the basis of preparation. PMID:22131721

  19. The CIPM list of recommended frequency standard values: guidelines and procedures

    Science.gov (United States)

    Riehle, Fritz; Gill, Patrick; Arias, Felicitas; Robertsson, Lennart

    2018-04-01

    A list of standard reference frequency values (LoF) of quantum transitions from the microwave to the optical regime has been recommended by the International Committee for Weights and Measures (Comité international des poids et mesures, CIPM) for use in basic research, technology, and for the metrology of time, frequency and length. The CIPM LoF contains entries that are recommended as secondary representations of the second in the International System of Units, and entries that can be used to serve as realizations of the definition of the metre. The historical perspective that led to the CIPM LoF is outlined. Procedures have been developed for updating existing, and validating new, entries into the CIPM LoF. The CIPM LoF might serve as an entry for a future redefinition of the second by an optical transition.

  20. Standardization of the Action Verbs used in Emergency Operating Procedures of NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Tong Il; Lee, Yong Hee; Park, Jae Chang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jeong, Yeon Seop; Chu, Gang Il [Korea Hydro and Nuclear Power, Daejeon (Korea, Republic of)

    2010-05-15

    The action verbs used in Emergency Operating Procedures (EOPs) for each nuclear power plant are translated respectively from the action verbs used in Emergency Recovery Guidelines (ERG) of the reference plants. The action verbs used in each plant are not largely different with one another. There are, however, some cases that the meanings of the same action verbs used in different plants are not consistent with each other and translations are not exact. In this study, the original English expressions of the action verbs and the translated verbs were compared and their accepted meanings analyzed. And then, standardization for the action verbs which are not exactly translated or which are used with different meanings among the plants was proposed

  1. Constructing an exposure chart: step by step (based on standard procedures)

    International Nuclear Information System (INIS)

    David, Jocelyn L; Cansino, Percedita T.; Taguibao, Angileo P.

    2000-01-01

    An exposure chart is very important in conducting radiographic inspection of materials. By using an accurate exposure chart, an inspector is able to avoid a trial and error way of determining correct time to expose a specimen, thereby producing a radiograph that has an acceptable density based on a standard. The chart gives the following information: x-ray machine model and brand, distance of the x-ray tube from the film, type and thickness of intensifying screens, film type, radiograph density, and film processing conditions. The methods of preparing an exposure chart are available in existing radiographic testing manuals. These described methods are presented in step by step procedures, covering the actual laboratory set-up, data gathering, computations, and transformation of derived data into Characteristic Curve and Exposure Chart

  2. Development of a standard test procedure for devices on thermal weed control

    Directory of Open Access Journals (Sweden)

    Verschwele, Arnd

    2016-02-01

    Full Text Available In contrast to the standard evaluation of the efficacy of pesticides and the testing of spraying equipment there are no comparable testing procedure for equipment of thermal weed control. It is the aim of the investigations described here to develop a standard procedure for assessing temperature distribution and biological efficacy. This will be the basis for quality testing which can be directly used by practical users. Also it can help engineers to improve devices if constructive gaps will be identified by these tests. The results from testing a flaming device (Green-Flame 850 E demonstrated such a potential for technical improvement: The temperature decreased from 159 °C to 89 °C by increasing driving speed from 0.35 m/s to 0.81 m/s. The variation of the temperature related to the working width was extremely high: The range was 60 °C at highest speed and 79 °C at lowest speed, respectively. The biological efficacy against the test plant species Sinapis arvensis was also affected by the driving speed and the corresponding temperature. A driving speed not higher than 0.53 m/s resulted in efficacy rates of almost 95%. However, the efficacy was only 66% at the highest tested speed of 0.81 m/s. Thus, the needed effective temperature is between 89 °C und 106 °C. In contrast, Lolium perenne was controlled by only 72% under the tested conditions. Here a dose-response relationship was not observed. The variation of the temperature, as well as the biological efficacy, was extremely heterogeneous and not satisfying in terms of an economic and safe use. Similar results were found for other devices on thermal weed control.

  3. Standard Operating Procedure (SOP) for Rapid and Efficient Production of Stevia Tissue Culture Seedlings

    International Nuclear Information System (INIS)

    Norazlina Noordin; Peng, C.S.; Rusli Ibrahim

    2015-01-01

    Stevia rebaudiana Bertoni is a non-caloric natural sweetener which is 300 times sweeter than cane sugar. Extracts from stevia leaves has vast application in food and beverages based industries, can be added to tea and coffee, cooked or baked goods, processed foods and confectionary goods. Recently, stevia attained awareness owing to its natural, non-caloric sweetness by diet/ health conscious and diabetic persons (Arpita et al., 2011). This natural sweetener has high commercial value in global market, it was estimated that global market value for stevia is be around USD11 billion by year 2015. Although stevia is being largely popularized in Malaysia and other countries but large-scale propagation procedures for the continuous supply of planting materials in commercial plantation has yet to be established, optimized and standardized. Furthermore, propagation through stevia seeds is often very difficult due to self-incompatibility which results in sterile seeds (Sakaguchi et al., 1982). Tissue culture is the only rapid process for the mass propagation of stevia and there have been few reports of in vitro growth of stevia (Miyagaya et al., 1986) and in vitro micropropagation from shoot tip and leaf (Uddin et al., 2006). Hence, study was carried out to establish a suitable protocol for in vitro propagation of S. rebaudiana Bertoni that can be further up-scaled for mass propagation of stevia seedlings. The established Standard Operating Procedure (SOP) will ensure rapid and efficient production of stevia tissue culture seedlings for continuous supply of planting materials for commercial stevia plantations in Malaysia. Preparation of growth medium, multiplication of shoots, rooting of plant lets and hardening of ex-vitro rooted plant lets is discussed in this paper. (author)

  4. The importance of strong evaluation standards and procedures in training residents.

    Science.gov (United States)

    Short, J P

    1993-07-01

    A strong evaluation process in a residency offers faculty an opportunity to strengthen the educational program, to help residents know what is expected of them, and to remove with minimum difficulties those residents who are not progressing satisfactorily and do not appear to be salvageable. Despite these advantages, the evaluation of residents during their training is often done poorly or not at all. The author describes the kinds of standards and procedures that constitute a sound, strong evaluation process, proposes criteria for academic probation and due process when a resident is performing unacceptably, and describes the role that the medical school administration should play in the evaluation process, one that is flexible enough to allow each program to comply and still have program-specific procedures. The author closes with statistics on how few residents are dismissed for incompetency or unacceptable behaviors, and inquires how many more might be found if strong evaluation processes were more widely used. Even so, in the attempt to evaluate residents and to foster protection from legal problems, residency program directors must keep in mind the importance of letting residents make mistakes and learn from them; a good evaluation system strikes a balance that fosters the learning process and benefits the residents, the medical school, and the community.

  5. Collection of Pyrethroids in Water and Sediment Matrices: Development and Validation of a Standard Operating Procedure

    Science.gov (United States)

    Hladik, Michelle; Orlando, James L.; Kuivila, Kathryn

    2009-01-01

    Loss of pyrethroid insecticides onto surfaces during sample collection can confound the interpretation of analytical and toxicity test results. Sample collection devices, container materials, and water matrix composition have a significant influence on the association of pyrethroids to container walls, which can be as high as 50 percent. Any sample collection method involving transfer through multiple containers or pieces of equipment increases the potential for pyrethroid loss. This loose 'surface-association' with container walls can be reversed through agitation. When sampling water matrices with pumps or autosamplers, no pyrethroids were lost as long as the water was moving continuously through the system. When collecting water matrices in containers, the material with the least amount of pyrethroid sorption is as follows: glass less than (pyrethroids were easier to re-suspend from the glass container walls. Since the amount of surface-association is proportional to the ratio of volume-to-contact-area of the sample, taking larger-volume field samples (greater than 3 liters) reduced pyrethroid losses to less than 10 percent. The amount of surface-association cannot be predicted easily because of the dependence on water matrix composition; samples with higher dissolved organic carbon or suspended-sediment concentrations were observed to have lower percent loss. Sediment samples were not affected by glass-container sorption (the only containers tested). Standardized sample-collection protocols are critical to yield accurate pyrethroid concentrations for assessment of potential effects, and have been summarized in an accompanying standard operating procedure.

  6. Enhanced Sanitation Standard Operating Procedures Have Limited Impact on Listeria monocytogenes Prevalence in Retail Delis.

    Science.gov (United States)

    Etter, Andrea J; Hammons, Susan R; Roof, Sherry; Simmons, Courtenay; Wu, Tongyu; Cook, Peter W; Katubig, Alex; Stasiewicz, Matthew J; Wright, Emily; Warchocki, Steven; Hollingworth, Jill; Thesmar, Hilary S; Ibrahim, Salam A; Wiedmann, Martin; Oliver, Haley F

    2017-10-20

    In a recent longitudinal surveillance study in 30 U.S. retail delicatessens, 9.7% of environmental surfaces were positive for Listeria monocytogenes, and we found substantial evidence of persistence. In this study, we aimed to reduce the prevalence and persistence of L. monocytogenes in the retail deli environment by developing and implementing practical and feasible intervention strategies (i.e., sanitation standard operating procedures; SSOPs). These SSOPs were standardized across the 30 delis enrolled in this study. SSOP implementation was verified by systems inherent to each retailer. Each deli also was equipped with ATP monitoring systems to verify effective sanitation. We evaluated intervention strategy efficacy by testing 28 food and nonfood contact surfaces for L. monocytogenes for 6 months in all 30 retail delis. The efficacy of the intervention on the delis compared with preintervention prevalence level was not statistically significant; we found that L. monocytogenes could persist despite implementation of enhanced SSOPs. Systematic and accurate use of ATP monitoring systems varied widely among delis. The findings indicate that intervention strategies in the form of enhanced daily SSOPs were not sufficient to eliminate L. monocytogenes from highly prevalent and persistently contaminated delis and that more aggressive strategies (e.g., deep cleaning or capital investment in redesign or equipment) may be necessary to fully mitigate persistent contamination.

  7. Leptospirosis in a small animal veterinarian: reminder to follow standardized infection control procedures.

    Science.gov (United States)

    Baer, R; Turnberg, W; Yu, D; Wohrle, R

    2010-06-01

    A small animal veterinarian in Washington State developed leptospirosis after an occupational exposure. Approximately 10 days prior to the onset of illness, he examined a healthy appearing pet rat for fleas, which urinated on his un-gloved hands. Although the veterinarian washed his hands after the examination, his hands had abrasions from gardening. The veterinarian was hospitalized for 12 days and was able to return to work part-time 1 month following discharge. This illness may have been prevented if the veterinarian had been wearing gloves during the examination as recommended by the National Association of State Public Health Veterinarians (NASPHV), Veterinary Infection Control Committee, in its Compendium of Veterinary Standard Precautions for Zoonotic Disease Prevention in Veterinary Personnel (2008). This case alerts us to the need for small animal veterinarians to minimize their infection risk by practising recommended infection control procedures. Veterinarians should establish and follow a written infection control plan based on the standardized infection control approach adopted by the NASPHV to minimize their risk of occupational zoonotic infections.

  8. CSNI international standard problem procedures - CSNI Report No. 17 - Revision 4

    International Nuclear Information System (INIS)

    Micaelli, J.C.

    2004-01-01

    . Careful consideration and planning is therefore required. After a brief recall of the ISPs' objectives, this document provides guidelines to be followed during the different phases of an ISP. Two phases are considered. The first one consists in proposing and selecting an ISP, the second one consists in performing an ISP. This revised document was prepared under the Leadership of J.-C. Micaelli (IRSN). It was reviewed and endorsed in September 2003 by the Working Group on the Analysis and Management of Accidents (GAMA), GAMA performed in 2003 a survey on updating CSNI Report No. 17, 'CSNI Standard Problem Procedures', first published in 1977, last updated in 1989. The objective of this activity was to collect proposals regarding the improvement of ISP efficiency with respect to their objectives and the improvement of the quality of the procedures document. Eleven series of questions were asked in the survey, related to: - General structure of the procedures document; - ISP objectives; - Six phases: ISP proposal, ISP specification, ISP results reporting, Preparation of the preliminary data comparison and interpretation report, Post-ISP analysis, Preparation of the final comparison and interpretation report; - Updating of the procedures; - Support to be provided by the participants

  9. 77 FR 65823 - Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

    Science.gov (United States)

    2012-10-31

    ... Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures... titled ``Table 3 to Sec. 87.23--Tier 6 NO X Standards for New Subsonic Turbofan or Turbojet Engines with... for New Subsonic Turbofan or Turbojet Engines With Rated Output Above 26.7 kN and the rated output (in...

  10. Acucise™ endopyelotomy in a porcine model: procedure standardization and analysis of safety and immediate efficacy

    Directory of Open Access Journals (Sweden)

    Andreoni Cássio

    2004-01-01

    Full Text Available PURPOSE: The study here presented was done to test the technical reliability and immediate efficacy of the Acucise device using a standardized technique. MATERIALS AND METHODS: 56 Acucise procedures were performed in pigs by a single surgeon who used a standardized technique: insert 5F angiographic catheter bilaterally up to the midureter, perform retrograde pyelogram, Amplatz super-stiff guidewire is advanced up to the level of the renal pelvis, angiographic catheters are removed, Acucise catheter balloon is advanced to the ureteropelvic junction (UPJ level, the super-stiff guide-wire is removed and the contrast medium in the renal pelvis is aspirated and replaced with distilled water, activate Acucise at 75 watts of pure cutting current, keep the balloon fully inflated for 10 minutes, perform retrograde ureteropyelogram to document extravasation, remove Acucise catheter and pass an ureteral stent and remove guide-wire. RESULTS: In no case did the Acucise device present malfunction. The electrocautery activation time was 2.2 seconds (ranging from 2 to 4 seconds. The extravasation of contrast medium, visible by fluoroscopy, occurred in 53 of the 56 cases (94.6%. In no case there was any evidence of intraoperative hemorrhage. CONCLUSIONS: This study revealed that performing Acucise endopyelotomy routinely in a standardized manner could largely preclude intraoperative device malfunction and eliminate complications while achieving a successful incision in the UPJ. With the guidelines that were used in this study, we believe that Acucise endopyelotomy can be completed successfully and safely in the majority of selected patients with UPJ obstruction.

  11. Standard operating procedures for pre-analytical handling of blood and urine for metabolomic studies and biobanks

    International Nuclear Information System (INIS)

    Bernini, Patrizia; Bertini, Ivano; Luchinat, Claudio; Nincheri, Paola; Staderini, Samuele; Turano, Paola

    2011-01-01

    1 H NMR metabolic profiling of urine, serum and plasma has been used to monitor the impact of the pre-analytical steps on the sample quality and stability in order to propose standard operating procedures (SOPs) for deposition in biobanks. We analyzed the quality of serum and plasma samples as a function of the elapsed time (t = 0−4 h) between blood collection and processing and of the time from processing to freezing (up to 24 h). The stability of the urine metabolic profile over time (up to 24 h) at various storage temperatures was monitored as a function of the different pre-analytical treatments like pre-storage centrifugation, filtration, and addition of the bacteriostatic preservative sodium azide. Appreciable changes in the profiles, reflecting changes in the concentration of a number of metabolites, were detected and discussed in terms of chemical and enzymatic reactions for both blood and urine samples. Appropriate procedures for blood derivatives collection and urine preservation/storage that allow maintaining as much as possible the original metabolic profile of the fresh samples emerge, and are proposed as SOPs for biobanking.

  12. Standard operating procedures for pre-analytical handling of blood and urine for metabolomic studies and biobanks

    Energy Technology Data Exchange (ETDEWEB)

    Bernini, Patrizia; Bertini, Ivano, E-mail: bertini@cerm.unifi.it; Luchinat, Claudio [University of Florence, Magnetic Resonance Center (CERM) (Italy); Nincheri, Paola; Staderini, Samuele [FiorGen Foundation (Italy); Turano, Paola [University of Florence, Magnetic Resonance Center (CERM) (Italy)

    2011-04-15

    {sup 1}H NMR metabolic profiling of urine, serum and plasma has been used to monitor the impact of the pre-analytical steps on the sample quality and stability in order to propose standard operating procedures (SOPs) for deposition in biobanks. We analyzed the quality of serum and plasma samples as a function of the elapsed time (t = 0-4 h) between blood collection and processing and of the time from processing to freezing (up to 24 h). The stability of the urine metabolic profile over time (up to 24 h) at various storage temperatures was monitored as a function of the different pre-analytical treatments like pre-storage centrifugation, filtration, and addition of the bacteriostatic preservative sodium azide. Appreciable changes in the profiles, reflecting changes in the concentration of a number of metabolites, were detected and discussed in terms of chemical and enzymatic reactions for both blood and urine samples. Appropriate procedures for blood derivatives collection and urine preservation/storage that allow maintaining as much as possible the original metabolic profile of the fresh samples emerge, and are proposed as SOPs for biobanking.

  13. Towards internationally acceptable standards for food additives and contaminants based on the use of risk analysis

    NARCIS (Netherlands)

    Huggett, A.; Petersen, B.J.; Walker, R.; Fisher, C.E.; Notermans, S.H.W.; Rombouts, F.M.; Abbott, P.; Debackere, M.; Hathaway, S.C.; Hecker, E.F.F.; Knaap, A.G.A.; Kuznesof, P.M.; Meyland, I.; Moy, G.; Narbonne, J.-F.; Paakkanen, J.; Smith, M.R.; Tennant, D.; Wagstaffe, P.; Wargo, J.; Würtzen, G.

    1998-01-01

    Internationally acceptable norms need to incorporate sound science and consistent risk management principles in an open and transparent manner, as set out in the Agreement on the Application of Sanitary and Phytosanitary Measures (the SPS Agreement). The process of risk analysis provides a procedure

  14. Developing standard performance testing procedures for MC and A components at a site

    International Nuclear Information System (INIS)

    Scherer, Carolynn

    2010-01-01

    The condition of a nuclear material control and accountability system (MC and A) and its individual components, as with any system combining technical elements, documentation and the human factor, may be characterized through an aggregate of values for the various parameters that determine the system's ability to perform. The MC and A system's status may be functioning effectively, marginally or not functioning based on a summary of the values of the individual parameters. This work included a review of the following elements and subsystems or components for a material control and accountability system: (1) MC and A Elements: Information subsystem, Measurement subsystem, NM access subsystem, including a tamper-indicating device (TID) program, and Automated information-gathering subsystem; and (2) Detecting NM Loses Elements: Inventory differences, Shipper/receiver differences, Confirmatory measurements and differences with accounting data, and TID or seal violations. In order to detect the absence or loss of nuclear material there must be appropriate interactions among the elements and their respective subsystems (from the list above). Additionally this work includes a review of the status of regulatory requirements for the MC and A system components and potential criteria that support the evaluation of the performance of the listed components. The listed components had performance testing algorithms and procedures developed that took into consideration the regulatory criteria. The developed MC and A performance-testing procedures were the basis for a pilot Guide for MC and A Performance Testing at the MBAs of SSC RF IPPE.

  15. Evaluation of the H-point standard additions method (HPSAM) and the generalized H-point standard additions method (GHPSAM) for the UV-analysis of two-component mixtures.

    Science.gov (United States)

    Hund, E; Massart, D L; Smeyers-Verbeke, J

    1999-10-01

    The H-point standard additions method (HPSAM) and two versions of the generalized H-point standard additions method (GHPSAM) are evaluated for the UV-analysis of two-component mixtures. Synthetic mixtures of anhydrous caffeine and phenazone as well as of atovaquone and proguanil hydrochloride were used. Furthermore, the method was applied to pharmaceutical formulations that contain these compounds as active drug substances. This paper shows both the difficulties that are related to the methods and the conditions by which acceptable results can be obtained.

  16. 78 FR 54791 - Proposed Additional Airworthiness Design Standards: Advanced Avionics Under the Special Class...

    Science.gov (United States)

    2013-09-06

    ..., Kansas City, MO 64106. FOR FURTHER INFORMATION CONTACT: Mr. Doug Rudolph, Aerospace Engineer, Standards...-49, ``Electrical bonding and protection against lightning and static electricity'' 14 CFR 23.1307 at... City, MO 64106, between the hours of 7:30 a.m. and 4:00 p.m. weekdays, except Federal holidays. Issued...

  17. Standard operating procedures for quality audits of 60Co external beam radiotherapy facilities

    International Nuclear Information System (INIS)

    Larrinaga Cortina, E.F.; Dominguez Hung, L.; Campa Menendez, R.

    2001-01-01

    The use of radiotherapy implies the necessity of rigorous quality standards in its different components, aimed to provide the best possible treatment and avoid potential patients' risks, that could even cause him death. Projects of technical cooperation developed in Cuba and supported by the International Atomic Energy Agency address the implementation of Programs of Quality Assurance (PGC) in radiotherapy services. The establishment of the National Quality Audit Program (PNAC) is a superior stage. The National Control Center for Medical Devices, as the national regulator entity for the control and supervision of medical devices in the National Health System, is responsible for the making and execution of the PNAC. The audit modality selected was the inspection visit in situ due to its intrinsic advantages, our geographical extension and the number of radiotherapy services. This paper presents the methodology for the execution of the PNAC, in form of a Normalized Procedure of Operation (PNO) that defines the objectives, scope, terms and definitions, responsibilities, composition and selection of the auditor team, security's conditions, materials and equipment, steps of the audit execution, results calculation and interpretation, records, etc. (author)

  18. Developing standard performance testing procedures for material control and accounting components at a site

    International Nuclear Information System (INIS)

    Scherer, Carolynn P.; Bushlya, Anatoly V.; Efimenko, Vladimir F.; Ilyanstev, Anatoly; Regoushevsky, Victor I.

    2010-01-01

    The condition of a nuclear material control and accountability system (MC and A) and its individual components, as with any system combining technical elements and documentation, may be characterized through an aggregate of values for the various parameters that determine the system's ability to perform. The MC and A system's status may be functioning effectively, marginally or not functioning based on a summary of the values of the individual parameters. This work included a review of the following subsystems, MC and A and Detecting Material Losses, and their respective elements for the material control and accountability system: (a) Elements of the MC and A Subsystem - Information subsystem (Accountancy/Inventory), Measurement subsystem, Nuclear Material Access subsystem, including tamper-indicating device (TID) program, and Automated Information-gathering subsystem; (b) Elements for Detecting Nuclear Material Loses Subsystem - Inventory Differences, Shipper/receiver Differences, Confirmatory Measurements and differences with accounting data, and TID or Seal Violations. In order to detect the absence or loss of nuclear material there must be appropriate interactions among the elements and their respective subsystems from the list above. Additionally this work includes a review of regulatory requirements for the MC and A system component characteristics and criteria that support the evaluation of the performance of the listed components. The listed components had performance testing algorithms and procedures developed that took into consideration the regulatory criteria. The developed MC and A performance-testing procedures were the basis for a Guide for MC and A Performance Testing at the material balance areas (MBAs) of State Scientific Center of the Russian Federation - Institute for Physics and Power Engineering (SSC RF-IPPE).

  19. 77 FR 14279 - National Volatile Organic Compound Emission Standards for Aerosol Coatings-Addition of Dimethyl...

    Science.gov (United States)

    2012-03-09

    ... 13.03 Diethanolamine 111-42-2 4.05 Diethylene Glycol 111-46-6 3.55 n-Octane 111-65-9 1.11 2-Butoxy-1-Ethanol (Ethylene Glycol 111-76-2 2.90 Monobutyl Ether) Diethylene Glycol Methyl Ether (2-(2- 111-77-3 2... standards in its regulatory activities unless to do so would be inconsistent with applicable law or...

  20. Validity evidence for procedural competency in virtual reality robotic simulation, establishing a credible pass/fail standard for the vaginal cuff closure procedure.

    Science.gov (United States)

    Hovgaard, Lisette Hvid; Andersen, Steven Arild Wuyts; Konge, Lars; Dalsgaard, Torur; Larsen, Christian Rifbjerg

    2018-03-30

    The use of robotic surgery for minimally invasive procedures has increased considerably over the last decade. Robotic surgery has potential advantages compared to laparoscopic surgery but also requires new skills. Using virtual reality (VR) simulation to facilitate the acquisition of these new skills could potentially benefit training of robotic surgical skills and also be a crucial step in developing a robotic surgical training curriculum. The study's objective was to establish validity evidence for a simulation-based test for procedural competency for the vaginal cuff closure procedure that can be used in a future simulation-based, mastery learning training curriculum. Eleven novice gynaecological surgeons without prior robotic experience and 11 experienced gynaecological robotic surgeons (> 30 robotic procedures) were recruited. After familiarization with the VR simulator, participants completed the module 'Guided Vaginal Cuff Closure' six times. Validity evidence was investigated for 18 preselected simulator metrics. The internal consistency was assessed using Cronbach's alpha and a composite score was calculated based on metrics with significant discriminative ability between the two groups. Finally, a pass/fail standard was established using the contrasting groups' method. The experienced surgeons significantly outperformed the novice surgeons on 6 of the 18 metrics. The internal consistency was 0.58 (Cronbach's alpha). The experienced surgeons' mean composite score for all six repetitions were significantly better than the novice surgeons' (76.1 vs. 63.0, respectively, p negatives). Our study has gathered validity evidence for a simulation-based test for procedural robotic surgical competency in the vaginal cuff closure procedure and established a credible pass/fail standard for future proficiency-based training.

  1. ExSTA: External Standard Addition Method for Accurate High-Throughput Quantitation in Targeted Proteomics Experiments.

    Science.gov (United States)

    Mohammed, Yassene; Pan, Jingxi; Zhang, Suping; Han, Jun; Borchers, Christoph H

    2018-03-01

    Targeted proteomics using MRM with stable-isotope-labeled internal-standard (SIS) peptides is the current method of choice for protein quantitation in complex biological matrices. Better quantitation can be achieved with the internal standard-addition method, where successive increments of synthesized natural form (NAT) of the endogenous analyte are added to each sample, a response curve is generated, and the endogenous concentration is determined at the x-intercept. Internal NAT-addition, however, requires multiple analyses of each sample, resulting in increased sample consumption and analysis time. To compare the following three methods, an MRM assay for 34 high-to-moderate abundance human plasma proteins is used: classical internal SIS-addition, internal NAT-addition, and external NAT-addition-generated in buffer using NAT and SIS peptides. Using endogenous-free chicken plasma, the accuracy is also evaluated. The internal NAT-addition outperforms the other two in precision and accuracy. However, the curves derived by internal vs. external NAT-addition differ by only ≈3.8% in slope, providing comparable accuracies and precision with good CV values. While the internal NAT-addition method may be "ideal", this new external NAT-addition can be used to determine the concentration of high-to-moderate abundance endogenous plasma proteins, providing a robust and cost-effective alternative for clinical analyses or other high-throughput applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. 14 CFR Appendix A to Part 135 - Additional Airworthiness Standards for 10 or More Passenger Airplanes

    Science.gov (United States)

    2010-01-01

    ... position except that, if an approved automatic feathering system is installed, the propellers may be in the... meet FAR 23.783 and FAR 23.807 (a)(3), (b), and (c), and in addition: (a) There must be a means to lock... of the control into this position. The means provided must incorporate a positive lock or stop at...

  3. 76 FR 38843 - Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel Standards

    Science.gov (United States)

    2011-07-01

    ... fuels that would apply to all gasoline and diesel produced or imported in year 2012. In addition, today... that can be used to produce gasoline, diesel, or jet fuel. Feedstock is first fermented into carboxylic... facilities such as Terrabon and others who may produce cellulosic gasoline in the future to register and...

  4. 40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

    Science.gov (United States)

    2010-07-01

    ... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor... consumer in diesel motor vehicles or nonroad diesel engines. [69 FR 39171, June 29, 2004] ... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of Environment...

  5. 24 CFR 200.942 - Supplementary specific procedural requirements under HUD building product standards and...

    Science.gov (United States)

    2010-04-01

    ... the following standards: (i) AATCC 20A-81—Fiber Analysis: Quantitative; (ii) AATCC 16E-82... Energy Source; (viii) ASTM D2646-79—Standard Methods of Testing Backing Fabrics; (ix) ASTM D3936-80...-81—Standard Methods for Rubber Products—Chemical Analysis; (xi) ASTM D418-82—Standard Methods of...

  6. Staging in Patients with Small-Cell Lung Carcinoma; PET-CT versus Standard Staging Procedures

    Directory of Open Access Journals (Sweden)

    Burcu Yalçın

    2016-12-01

    Full Text Available Objective: The most important factor for accurate treatment of patients with small cell lung carcinoma (SCLC is accuracy of the initial staging. The aim of this study was to determine how often patients, staged as local or local-advanced disease by standard staging procedures (SSPs, would be staged to have a metastatic disease based on the findings of the positron emission tomography–computed tomography (PET-CT scan. Methods: Patients with SCLC who were staged as I, II, or III disease by SSPs (according to the American Joint Committee on Cancer Staging, 7th edition formed the study population. SSPs included computed tomography of chest, abdomen, brain (or magnetic resonance imaging of brain, and bone scintigraphy. These patients were re-staged with 18F-FDG PET-CT scan. Results: Between 2013 and 2015, 27 patients were prospectively studied. Of these patients, 92.5% were male and the median age was 61. Among 27 patients, distant metastasis was detected by PET-CT in 7 (25.9% patients. Two of 7 patients were determined as stage IIIA by SSPs and 5 of 17 patients that were determined as stage IIIB by SSPs were upstaged to metastatic disease by PET-CT. All of the 7 patients had bone metastasis by PET-CT. But bone metastasis could not be detected with bone scintigraphy. Conclusion: PET-CT detected distant metastasis in one quarter of SCLC stage III patients by SSPs. Patients who staged local-advanced SCLC with CT of the chest have to be assessed by PET-CT for extracranial distant metastasis.

  7. Evaluation of the surface free energy of plant surfaces: toward standardizing the procedure.

    Science.gov (United States)

    Fernández, Victoria; Khayet, Mohamed

    2015-01-01

    Plant surfaces have been found to have a major chemical and physical heterogeneity and play a key protecting role against multiple stress factors. During the last decade, there is a raising interest in examining plant surface properties for the development of biomimetic materials. Contact angle measurement of different liquids is a common tool for characterizing synthetic materials, which is just beginning to be applied to plant surfaces. However, some studies performed with polymers and other materials showed that for the same surface, different surface free energy values may be obtained depending on the number and nature of the test liquids analyzed, materials' properties, and surface free energy calculation methods employed. For 3 rough and 3 rather smooth plant materials, we calculated their surface free energy using 2 or 3 test liquids and 3 different calculation methods. Regardless of the degree of surface roughness, the methods based on 2 test liquids often led to the under- or over-estimation of surface free energies as compared to the results derived from the 3-Liquids method. Given the major chemical and structural diversity of plant surfaces, it is concluded that 3 different liquids must be considered for characterizing materials of unknown physico-chemical properties, which may significantly differ in terms of polar and dispersive interactions. Since there are just few surface free energy data of plant surfaces with the aim of standardizing the calculation procedure and interpretation of the results among for instance, different species, organs, or phenological states, we suggest the use of 3 liquids and the mean surface tension values provided in this study.

  8. A Guide for Developing Standard Operating Job Procedures for the Sludge Conditioning & Dewatering Process Wastewater Treatment Facility. SOJP No. 11.

    Science.gov (United States)

    Schwing, Carl M.

    This guide describes standard operating job procedures for the sludge conditioning and dewatering process of wastewater treatment facilities. In this process, sludge is treated with chemicals to make the sludge coagulate and give up its water more easily. The treated sludge is then dewatered using a vacuum filter. The guide gives step-by-step…

  9. A Guide for Developing Standard Operating Job Procedures for the Primary Sedimentation Process Wastewater Treatment Facility. SOJP No. 4.

    Science.gov (United States)

    Charles County Community Coll., La Plata, MD.

    This guide describes standard operating job procedures for the primary sedimentation process of wastewater treatment plants. The primary sedimentation process involves removing settleable and suspended solids, in part, from wastewater by gravitational forces, and scum and other floatable solids from wastewater by mechanical means. Step-by-step…

  10. A Guide for Developing Standard Operating Job Procedures for the Screening & Grinding Process Wastewater Treatment Facility. SOJP No. 1.

    Science.gov (United States)

    Deal, Gerald A.; Montgomery, James A.

    This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

  11. A Guide for Developing Standard Operating Job Procedures for the Sludge Thickening Process Wastewater Treatment Facility. SOJP No. 9.

    Science.gov (United States)

    Schwing, Carl M.

    This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

  12. A Guide for Developing Standard Operating Job Procedures for the Tertiary Multimedia Filtration Process Wastewater Treatment Facility. SOJP No. 7.

    Science.gov (United States)

    Petrasek, Al, Jr.

    This guide describes the standard operating job procedures for the tertiary multimedia filtration process of wastewater treatment plants. The major objective of the filtration process is the removal of suspended solids from the reclaimed wastewater. The guide gives step-by-step instructions for pre-start up, start-up, continuous operation, and…

  13. A Guide for Developing Standard Operating Job Procedures for the Digestion Process Wastewater Treatment Facility. SOJP No. 10.

    Science.gov (United States)

    Schwing, Carl M.

    This guide describes standard operating job procedures for the digestion process of wastewater treatment facilities. This process is for reducing the volume of sludge to be treated in subsequent units and to reduce the volatile content of sludge. The guide gives step-by-step instructions for pre-startup, startup, continuous operating, shutdown,…

  14. Additionality and permanence standards in California's Forest Offset Protocol: A review of project and program level implications.

    Science.gov (United States)

    Ruseva, T; Marland, E; Szymanski, C; Hoyle, J; Marland, G; Kowalczyk, T

    2017-08-01

    A key component of California's cap-and-trade program is the use of carbon offsets as compliance instruments for reducing statewide GHG emissions. Under this program, offsets are tradable credits representing real, verifiable, quantifiable, enforceable, permanent, and additional reductions or removals of GHG emissions. This paper focuses on the permanence and additionality standards for offset credits as defined and operationalized in California's Compliance Offset Protocol for U.S. Forest Projects. Drawing on a review of the protocol, interviews, current offset projects, and existing literature, we discuss how additionality and permanence standards relate to project participation and overall program effectiveness. Specifically, we provide an overview of offset credits as compliance instruments in California's cap-and-trade program, the timeline for a forest offset project, and the factors shaping participation in offset projects. We then discuss the implications of permanence and additionality at both the project and program levels. Largely consistent with previous work, we find that stringent standards for permanent and additional project activities can present barriers to participation, but also, that there may be a trade-off between project quality and quantity (i.e. levels of participation) when considering overall program effectiveness. We summarize what this implies for California's forest offset program and provide suggestions for improvements in light of potential program diffusion and policy learning. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. The Standard Days Method: an addition to the arsenal of family planning method choice in Ethiopia.

    Science.gov (United States)

    Bekele, Biruhtesfa; Fantahun, Mesganaw

    2012-07-01

    The Standard Days Method ® (SDM) is a fertility awareness-based method of family planning that helps users to identify the fertile days of the reproductive cycle (Days 8-19). To prevent pregnancy users avoid unprotected sexual intercourse during these days. A cross-sectional community-based study was conducted from December 2007 to June 2008 in four operational areas of Pathfinder International Ethiopia. A total of 184 SDM users were included in the study. Quantitative and qualitative methods of data collection were used. The aim of the study was to examine the experience of introducing the SDM at community level in Ethiopia. Of the 184 participants, 80.4% were still using the SDM at the time of the survey, with 35% having used it for between 6 and 12 months, while 42% had used it for more than a year. The majority (83%) knew that a woman is most likely to conceive halfway through her menstrual cycle, and nearly 91% correctly said that the SDM does not confer protection from sexually transmitted infections/AIDS. A substantial majority (75%) had correctly identified what each colour-coded bead represents in the CycleBeads ®, and an aggregate of 90.5% of women practised all the elements of correct use. This study demonstrates the importance of the SDM in increasing the availability and accessibility of family planning, and the potential to improve family planning method choice and method mix by expanding use of the SDM.

  16. Standard operating procedure for air quality stationary source management at Air Force installations in the Air Force Materiel Command

    Energy Technology Data Exchange (ETDEWEB)

    Powell, C.M.; Ryckman, S.J. [Headquarters Air Force Materiel Command, Wright-Patterson AFB, OH (United States). Environmental Compliance Branch

    1997-12-31

    To sustain compliance and avoid future enforcement actions associated with air quality stationary sources and to provide installation commanders with a certification process for Title V permitting, and Air Force Materiel Command (AFMC) Standard Operating Procedure (SOP) for Stationary Source Management has been developed. The SOP consists of two major sections: Stationary Source Planning and Administration, and Stationary Source Operations These two main sections are further subdivided into twelve subsections which delineate requirements (e.g. maintaining inventories, applying for and maintaining permits, keeping records, reporting and certifying compliance) and assign ownership of processes and responsibilities (e.g. appointing a manager/alternate for each identified stationary air source). In addition, the SOP suggests training that should be provided from operator to commander levels to ensure that all personnel involved with a stationary air source are aware of their responsibilities. Implementation of the SOP should provide for the essential control necessary for installation commanders to eliminate stationary air source non-compliance and to certify compliance in accordance with the Title V Operating Permit requirements. This paper will discuss: the background and purpose for the SOPs content, the twelve subsections of the SOP, the success of implementation at various installations, the relevance or the recommended training, the success of negotiating with various labor unions for SOP implementation and the success of the SOP in reference to its intended purpose.

  17. 78 FR 4060 - Manufactured Home Construction and Safety Standards, Test Procedures for Roof Trusses

    Science.gov (United States)

    2013-01-18

    ..., such as metal connector plates or wood gussets or their equivalents, uplift testing in Wind Zone I is.... SUMMARY: This final rule amends the roof truss testing procedures in the Federal Manufactured Home... testing procedures in 2003. In response to public comments, HUD returned the proposal to MHCC for further...

  18. Calibration of brachytherapy sources. Guidelines on standardized procedures for the calibration of brachytherapy sources at Secondary Standard Dosimetry Laboratories (SSDLs) and hospitals

    International Nuclear Information System (INIS)

    1999-04-01

    Today, irradiation by brachytherapy is considered an essential part of the treatment for almost all the sites of cancer. With the improved localization techniques and treatment planning systems, it is now possible to have precise and reproducible dose delivery. However, the desired clinical results can only be achieved with a good clinical and dosimetric practice, i.e. with the implementation of a comprehensive quality assurance (QA) programme which includes detailed quality control procedures. As summarized in the present report, accidents in brachytherapy treatments have been caused due to the lack of traceable calibration of the sources, due to the incorrect use of quantities and units, or errors made in the dose calculation procedure. The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources has established a requirement on the calibration of sources used for medical exposure. For sources used in brachytherapy treatments, a calibration traceable to a standards dosimetry laboratory is required. The present report deals with the calibration of brachytherapy sources and related quality control (QC) measurements, QC of ionization chambers and safety aspects related to the calibration procedures. It does not include safety aspects related to the clinical use of brachytherapy sources, which have been addressed in a recent IAEA publication, IAEA-TECDOC-1040, 'Design and Implementation of a Radiotherapy Programme: Clinical, Medical Physics, Radiation Protection and Safety Aspects'. The procedures recommended in this report yield traceability to internationally accepted standards. It must be realized, however, that a comprehensive QA programme for brachytherapy cannot rest on source calibration alone, but must ensure QC of all the equipment and techniques that are used for the dose delivery to the patient. The present publication incorporates the reports of several consultants meetings in the field of

  19. [Orthotopic cardiac transplantation with caval anastomosis: a comparative randomized study with standard procedure in 81 cases].

    Science.gov (United States)

    Deleuze, P; Benvenuti, C; Mazzucotelli, J P; Perdrix, C; Le Besnerais, P; Mourtada, A; Hillion, M L; Patrat, J F; Loisance, D Y

    1996-01-01

    Complete resection of the right atrium with conservation of a strip of left atrium around the 4 pulmonary veins followed by direct anastomosis on the vena cava has recently been proposed as an alternative to the standard orthotopic cardiac transplantation described by Shumway and Lower. In order to determine whether this "anatomical" transplantation should now be considered to be the procedure of choice, a prospective randomised study was undertaken in 1991 including 78 patients undergoing 81 cardiac transplantations by one of the two techniques: gr. I: classical transplantation (n = 40), gr. II: "anatomical" transplantation (n = 41). The groups were comparable in age, sex, weight, nature of the underlying cardiac disease and clinical status at the time of transplantation. Similarly, the parameters of the donors were comparable with respect to age, sex, weight and dosage of inotropic drugs at the time of explantation. All patients came of cardiopulmonary bypass with comparable ischaemia time of the graft (gr. I: 136 +/- 46 min; gr. II: 138 +/- 51 min). Immediate return to sinus rhythm occurred in 20 cases in gr. I and 36 cases in gr. II. Atrial arrhythmia persisted in 5 cases in gr. I but in no cases of gr. II. These differences were very significant (p < 0.001). There were 13 early deaths in gr. I and 8 in gr. II. Doppler echocardiography was performed two to three months after transplantation. The right atrial surface was significantly decreased in gr. II (18 +/- 4.7 cm2) compared with gr. I (24 +/- 7 cm2): the same difference was observed for the left atrium (gr. I: 24 +/- 4.5 cm2; gr. II: 20 +/- 5 cm2), p = 0.001. Tricuspid regurgitation was observed in 82% of patients in gr. I compared with 57% in gr. II (p < 0.005). Exercise stress tests during the same period showed no difference in peak oxygen consumption between the groups. Holter ECG monitoring led to permanent pacing in 2 patients of gr. I (5%). The technical simplicity and reduction of postoperative

  20. Does transcutaneous electrical nerve stimulation (TENS) alleviate the pain experienced during bone marrow sampling in addition to standard techniques? A randomised, double-blinded, controlled trial.

    Science.gov (United States)

    Tucker, David L; Rockett, Mark; Hasan, Mehedi; Poplar, Sarah; Rule, Simon A

    2015-06-01

    Bone marrow aspiration and trephine (BMAT) biopsies remain important tests in haematology. However, the procedures can be moderately to severely painful despite standard methods of pain relief. To test the efficacy of transcutaneous electrical nerve stimulation (TENS) in alleviating the pain from BMAT in addition to standard analgesia using a numerical pain rating scale (NRS). 70 patients requiring BMAT were randomised (1:1) in a double-blind, placebo-controlled trial. -35 patients received TENS impulses at a strong but comfortable amplitude (intervention group) and 35 patients received TENS impulses just above the sensory threshold (control group) (median pulse amplitude 20 and 7 mA, respectively). Patients and operators were blinded to group allocation. Pain assessments were made using a numerical pain scale completed after the procedure. No significant difference in NRS pain recalled after the procedure was detected (median pain score 5.7 (95% CI 4.8 to 6.6) in control vs 5.6 (95% CI 4.8 to 6.4) in the intervention group). However, 100% of patients who had previous experience of BMAT and >94% of participants overall felt they benefited from using TENS and would recommend it to others for this procedure. There were no side effects from the TENS device, and it was well tolerated. TENS is a safe, non-invasive adjunct to analgesia for reducing pain during bone marrow biopsy and provides a subjective benefit to most users; however, no objective difference in pain scores was detected when using TENS in this randomised controlled study. NCT02005354. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  1. Interim radiological safety standards and evaluation procedures for subseabed high-level waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Klett, R.D.

    1997-06-01

    The Seabed Disposal Project (SDP) was evaluating the technical feasibility of high-level nuclear waste disposal in deep ocean sediments. Working standards were needed for risk assessments, evaluation of alternative designs, sensitivity studies, and conceptual design guidelines. This report completes a three part program to develop radiological standards for the feasibility phase of the SDP. The characteristics of subseabed disposal and how they affect the selection of standards are discussed. General radiological protection standards are reviewed, along with some new methods, and a systematic approach to developing standards is presented. The selected interim radiological standards for the SDP and the reasons for their selection are given. These standards have no legal or regulatory status and will be replaced or modified by regulatory agencies if subseabed disposal is implemented. 56 refs., 29 figs., 15 tabs.

  2. Interim radiological safety standards and evaluation procedures for subseabed high-level waste disposal

    International Nuclear Information System (INIS)

    Klett, R.D.

    1997-06-01

    The Seabed Disposal Project (SDP) was evaluating the technical feasibility of high-level nuclear waste disposal in deep ocean sediments. Working standards were needed for risk assessments, evaluation of alternative designs, sensitivity studies, and conceptual design guidelines. This report completes a three part program to develop radiological standards for the feasibility phase of the SDP. The characteristics of subseabed disposal and how they affect the selection of standards are discussed. General radiological protection standards are reviewed, along with some new methods, and a systematic approach to developing standards is presented. The selected interim radiological standards for the SDP and the reasons for their selection are given. These standards have no legal or regulatory status and will be replaced or modified by regulatory agencies if subseabed disposal is implemented. 56 refs., 29 figs., 15 tabs

  3. Evaluation of the ISO Standard 11063 DNA Extraction Procedure for Assessing Soil Microbial Abundance and Community Structure

    Science.gov (United States)

    Griffiths, Robert; Dequiedt, Samuel; Lelievre, Mélanie; Regnier, Tiffanie; Nowak, Virginie; Bailey, Mark; Lemanceau, Philippe; Bispo, Antonio; Chabbi, Abad; Maron, Pierre-Alain; Mougel, Christophe; Ranjard, Lionel

    2012-01-01

    Soil DNA extraction has become a critical step in describing microbial biodiversity. Historically, ascertaining overarching microbial ecological theories has been hindered as independent studies have used numerous custom and commercial DNA extraction procedures. For that reason, a standardized soil DNA extraction method (ISO-11063) was previously published. However, although this ISO method is suited for molecular tools such as quantitative PCR and community fingerprinting techniques, it has only been optimized for examining soil bacteria. Therefore, the aim of this study was to assess an appropriate soil DNA extraction procedure for examining bacterial, archaeal and fungal diversity in soils of contrasting land-use and physico-chemical properties. Three different procedures were tested: the ISO-11063 standard; a custom procedure (GnS-GII); and a modified ISO procedure (ISOm) which includes a different mechanical lysis step (a FastPrep ®-24 lysis step instead of the recommended bead-beating). The efficacy of each method was first assessed by estimating microbial biomass through total DNA quantification. Then, the abundances and community structure of bacteria, archaea and fungi were determined using real-time PCR and terminal restriction fragment length polymorphism approaches. Results showed that DNA yield was improved with the GnS-GII and ISOm procedures, and fungal community patterns were found to be strongly dependent on the extraction method. The main methodological factor responsible for differences between extraction procedure efficiencies was found to be the soil homogenization step. For integrative studies which aim to examine bacteria, archaea and fungi simultaneously, the ISOm procedure results in higher DNA recovery and better represents microbial communities. PMID:22984486

  4. Evaluation of the ISO standard 11063 DNA extraction procedure for assessing soil microbial abundance and community structure.

    Directory of Open Access Journals (Sweden)

    Pierre Plassart

    Full Text Available Soil DNA extraction has become a critical step in describing microbial biodiversity. Historically, ascertaining overarching microbial ecological theories has been hindered as independent studies have used numerous custom and commercial DNA extraction procedures. For that reason, a standardized soil DNA extraction method (ISO-11063 was previously published. However, although this ISO method is suited for molecular tools such as quantitative PCR and community fingerprinting techniques, it has only been optimized for examining soil bacteria. Therefore, the aim of this study was to assess an appropriate soil DNA extraction procedure for examining bacterial, archaeal and fungal diversity in soils of contrasting land-use and physico-chemical properties. Three different procedures were tested: the ISO-11063 standard; a custom procedure (GnS-GII; and a modified ISO procedure (ISOm which includes a different mechanical lysis step (a FastPrep ®-24 lysis step instead of the recommended bead-beating. The efficacy of each method was first assessed by estimating microbial biomass through total DNA quantification. Then, the abundances and community structure of bacteria, archaea and fungi were determined using real-time PCR and terminal restriction fragment length polymorphism approaches. Results showed that DNA yield was improved with the GnS-GII and ISOm procedures, and fungal community patterns were found to be strongly dependent on the extraction method. The main methodological factor responsible for differences between extraction procedure efficiencies was found to be the soil homogenization step. For integrative studies which aim to examine bacteria, archaea and fungi simultaneously, the ISOm procedure results in higher DNA recovery and better represents microbial communities.

  5. Standard Operating Procedures for Preparing and Handling Sterile Male Tsetse flies for Release

    International Nuclear Information System (INIS)

    Argiles-Herrero, Rafa; Leak, Stephen G.A.

    2016-01-01

    The purpose of this SOP is to describe the procedures involved in preparing tsetse flies reared in a breeding facility for release in the field for the sterile insect technique (SIT) as a component of Area-Wide Insect pest Management (AW-IPM). Following the procedures which are outlined will help to ensure that the released sterile male tsetse flies are of optimal quality.

  6. Standard operating procedure for combustion of 14C - samples with OX-500 biological material oxidizer

    International Nuclear Information System (INIS)

    Nashriyah Mat.

    1995-01-01

    This procedure is for the purpose of safe operation of OX-500 biological material oxidizer. For ease of operation, the operation flow chart (including testing the system and sample combustion) and end of day maintenance flow chart were simplified. The front view, diagrams and switches are duly copied from operating manual. Steps on sample preparation are also included for biotic and a biotic samples. This operating procedure is subjected to future reviews

  7. Quantitative mass spectrometric analysis of dipeptides in protein hydrolysate by a TNBS derivatization-aided standard addition method.

    Science.gov (United States)

    Hanh, Vu Thi; Kobayashi, Yutaro; Maebuchi, Motohiro; Nakamori, Toshihiro; Tanaka, Mitsuru; Matsui, Toshiro

    2016-01-01

    The aim of this study was to establish, through a standard addition method, a convenient quantification assay for dipeptides (GY, YG, SY, YS, and IY) in soybean hydrolysate using 2,4,6-trinitrobenzene sulfonate (TNBS) derivatization-aided LC-TOF-MS. Soybean hydrolysate samples (25.0 mg mL(-1)) spiked with target standards were subjected to TNBS derivatization. Under the optimal LC-MS conditions, five target dipeptides derivatized with TNBS were successfully detected. Examination of the standard addition curves, with a correlation coefficient of r(2) > 0.979, provided a reliable quantification of the target dipeptides, GY, YG, SY, YS, and IY, in soybean hydrolysate to be 424 ± 20, 184 ± 9, 2188 ± 199, 327 ± 16, and 2211 ± 133 μg g(-1) of hydrolysate, respectively. The proposed LC-MS assay is a reliable and convenient assay method, with no interference from matrix effects in hydrolysate, and with no requirement for the use of an isotope labeled internal standard. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Absolute Quantification of Water in Microporous Solids with1H Magic Angle Spinning NMR and Standard Addition.

    Science.gov (United States)

    Houlleberghs, Maarten; Hoffmann, Andreas; Dom, Dirk; Kirschhock, Christine E A; Taulelle, Francis; Martens, Johan A; Breynaert, Eric

    2017-07-05

    Zeolites are microporous materials driving industrial scale adsorption, ion exchange, and catalytic processes. Their water content dramatically impacts their properties, but its quantification with Karl Fisher titration or thermal gravimetric analysis is problematic. When standard addition of water is combined with 1 H magic angle spinning (MAS) NMR detection, absolute quantification of water in microporous materials becomes possible. The method was demonstrated on five different, commercially available zeolites.

  9. A Meta-Analytic Assessment of Empirical Differences in Standard Setting Procedures.

    Science.gov (United States)

    Bontempo, Brian D.; Marks, Casimer M.; Karabatsos, George

    Using meta-analysis, this research takes a look at studies included in a meta-analysis by R. Jaeger (1989) that compared the cut score set by one standard setting method with that set by another. This meta-analysis looks beyond Jaeger's studies to select 10 from the research literature. Each compared at least two types of standard setting method.…

  10. Malpractice claims and unintentional outcome of tonsil surgery and other standard procedures in otorhinolaryngology

    Science.gov (United States)

    Windfuhr, Jochen P.

    2015-01-01

    of malpractice after LN (16; 57%), TE (10; 37%), SP (8; 57%) and AE (2; 100%). There were 16 cases of PTH amongst 27 trials after TE resulting either in death (5) or apallic syndrome (5). Bleeding complications had occurred on the day of surgery in only 2 patients. 16 trials were based on malpractice claims following SP encompassing lack of informed consent (6), anosmia (4), septal perforation (2), frontobasal injury (2) and dry nose (2). Trials after LN procedures were associated exclusively with a lesion of the spinal accessory nerve (28), including lack of informed consent in 19 cases. 49 cases (69%) were decided for the defendant, 22 (31%) were decided for the plaintiff with monetary compensation in 7 of 29 AE/TE-trials, 9 of 28 LN-trials and 6 of 14 SP-trials. Lack of informed consent was not registered for AE/TE but LN (11) and SP (2). Conclusion: Complicated cases following TE, TT, ATE, SP and LN are not systematically collected in Germany. It can be assumed, that not every complicated case is published in the medical literature or law journals and therefore not obtainable for scientific research. Alleged medical malpracice is proven for less than 6% before trial stage. Approximately half of all cases result in a plaintiff verdict or settlement at court. Proper documentation of a thourough counselling, examination, indication, informed consent and follow-up assists the surgeon in litigation. An adequate complication management of PTH is essential, including instructions for the patients/parents, instructions for the medical staff and readily available surgical instruments. Successful outcome of life-threatening PTH is widely based on a proper airway management in an interdisciplinary approach. Electrosurgical tonsillectomy techniques were repeatedly labeled as a risk factor for bleeding complications following TE. Institutions should analyse the individual PTH rate on a yearly basis. Contradictory expert opinions and verdicts of the courts concerning spinal

  11. Extended device profiles and testing procedures for the approval process of integrated medical devices using the IEEE 11073 communication standard.

    Science.gov (United States)

    Janß, Armin; Thorn, Johannes; Schmitz, Malte; Mildner, Alexander; Dell'Anna-Pudlik, Jasmin; Leucker, Martin; Radermacher, Klaus

    2018-02-23

    Nowadays, only closed and proprietary integrated operating room systems (IORS) from big manufacturers are available on the market. Hence, the interconnection of components from third-party vendors is only possible with increased time and costs. In the context of the German Federal Ministry of Education and Research (BMBF)-funded project OR.NET (2012-2016), the open integration of medical devices from different manufacturers was addressed. An integrated operating theater based on the open communication standard IEEE 11073 shall give clinical operators the opportunity to choose medical devices independently of the manufacturer. This approach would be advantageous especially for hospital operators and small- and medium-sized enterprises (SME) of medical devices. Actual standards and concepts regarding technical feasibility and the approval process do not cope with the requirements for a modular integration of medical devices in the operating room (OR), based on an open communication standard. Therefore, innovative approval strategies and corresponding certification and test procedures, which cover actual legal and normative standards, have to be developed in order to support the future risk management and the usability engineering process of open integrated medical devices in the OR. The use of standardized device and service profiles and a three-step testing procedure, including conformity, interoperability and integration tests are described in this paper and shall support the manufacturers to integrate their medical devices without disclosing the medical devices' risk analysis and related confidential expertise or proprietary information.

  12. CTEPP STANDARD OPERATING PROCEDURE FOR CONDUCTING INTERNAL FIELD AUDITS AND QUALITY CONTROL (SOP-2.25)

    Science.gov (United States)

    This SOP describes the method for conducting internal field audits and quality control procedures. Internal field audits will be conducted to ensure the collection of high quality data. Internal field audits will be conducted by Field Auditors (the Field QA Officer and the Field...

  13. Effects of Computer-Based Training on Procedural Modifications to Standard Functional Analyses

    Science.gov (United States)

    Schnell, Lauren K.; Sidener, Tina M.; DeBar, Ruth M.; Vladescu, Jason C.; Kahng, SungWoo

    2018-01-01

    Few studies have evaluated methods for training decision-making when functional analysis data are undifferentiated. The current study evaluated computer-based training to teach 20 graduate students to arrange functional analysis conditions, analyze functional analysis data, and implement procedural modifications. Participants were exposed to…

  14. 42 CFR 493.1255 - Standard: Calibration and calibration verification procedures.

    Science.gov (United States)

    2010-10-01

    ... least a minimal (or zero) value, a mid-point value, and a maximum value near the upper limit of the... the number, type, and concentration of calibration materials, as well as acceptable limits for and the... acceptable limits for calibration verification. (b) Perform and document calibration verification procedures...

  15. HUBUNGAN ANTARA GAYA KEPEMIMPINAN PATH GOAL SUPERVISOR PABRIK BAJA DENGAN TINGKAT KEPATUHAN SOP (STANDARD OPERATIONAL PROCEDURE) PEKERJA

    OpenAIRE

    Ridho, Wahyu Fahrul

    2017-01-01

    ABSTRACTEmployee ignorance on Standard Operational Procedures (SOP) is one of the main causes of workplace accidents. This study was conducted to analyze the correlation between path goal leadership implemented by Gresik steel factory supervisors and employee obedience on company SOP. This study applied quantitative approach and cross-sectional research design. The data were collected through observation and interview on 52 respondents consisting of employees working led by 4 different superv...

  16. Calibration of photon and beta ray sources used in brachytherapy. Guidelines on standardized procedures at Secondary Standards Dosimetry Laboratories (SSDLs) and hospitals

    International Nuclear Information System (INIS)

    2002-03-01

    It has generally been recognized that international harmonization in radiotherapy dosimetry is essential. Consequently, the IAEA has given much effort to this, for example by publishing a number of reports in the Technical Reports Series (TRS) for external beam dosimetry, most notably TRS-277 and more recently TRS-398. Both of these reports describe in detail the steps to be taken for absorbed dose determination in water and they are often referred to as 'dosimetry protocols'. Similar to TRS-277, it is expected that TRS-398 will be adopted or used as a model by a large number of countries as their national protocol. In 1996, the IAEA established a calibration service for low dose rate (LDR) 137 Cs brachytherapy sources, which is the most widely used source for treatment of gynecological cancer. To further enhance harmonization in brachytherapy dosimetry, the IAEA published in 1999 IAEA-TECDOC-1079 entitled 'Calibration of Brachytherapy Sources. Guidelines on Standardized Procedures for the Calibration of Brachytherapy Sources at Secondary Standard Dosimetry Laboratories (SSDLs) and Hospitals'. The report was well received and was distributed in a large number of copies to the members of the IAEA/WHO network of SSDLs and to medical physicists working with brachytherapy. The present report is an update of the aforementioned TECDOC. Whereas TECDOC-1079 described methods for calibrating brachytherapy sources with photon energies at or above those of 192 Ir, the current report has a wider scope in that it deals with standardization of calibration of all the most commonly used brachytherapy sources, including both photon and beta emitting sources. The latter sources have been in use for a few decades already, but their calibration methods have been unclear. Methods are also described for calibrating sources used in the rapidly growing field of cardiovascular angioplasty. In this application, irradiation of the vessel wall is done in an attempt to prevent restenosis after

  17. Development and operation of a quality assurance system for deviations from standard operating procedures in a clinical cell therapy laboratory.

    Science.gov (United States)

    McKenna, D; Kadidlo, D; Sumstad, D; McCullough, J

    2003-01-01

    Errors and accidents, or deviations from standard operating procedures, other policy, or regulations must be documented and reviewed, with corrective actions taken to assure quality performance in a cellular therapy laboratory. Though expectations and guidance for deviation management exist, a description of the framework for the development of such a program is lacking in the literature. Here we describe our deviation management program, which uses a Microsoft Access database and Microsoft Excel to analyze deviations and notable events, facilitating quality assurance (QA) functions and ongoing process improvement. Data is stored in a Microsoft Access database with an assignment to one of six deviation type categories. Deviation events are evaluated for potential impact on patient and product, and impact scores for each are determined using a 0- 4 grading scale. An immediate investigation occurs, and corrective actions are taken to prevent future similar events from taking place. Additionally, deviation data is collectively analyzed on a quarterly basis using Microsoft Excel, to identify recurring events or developing trends. Between January 1, 2001 and December 31, 2001 over 2500 products were processed at our laboratory. During this time period, 335 deviations and notable events occurred, affecting 385 products and/or patients. Deviations within the 'technical error' category were most common (37%). Thirteen percent of deviations had a patient and/or a product impact score > or = 2, a score indicating, at a minimum, potentially affected patient outcome or moderate effect upon product quality. Real-time analysis and quarterly review of deviations using our deviation management program allows for identification and correction of deviations. Monitoring of deviation trends allows for process improvement and overall successful functioning of the QA program in the cell therapy laboratory. Our deviation management program could serve as a model for other laboratories in

  18. PFGE standard operating procedures for Listeria monocytogenes: harmonizing the typing of food and clinical strains in Europe.

    Science.gov (United States)

    Michelon, Damien; Félix, Benjamin; Vingadassalon, Noemie; Mariet, Jean-François; Larsson, Jonas T; Møller-Nielsen, Eva; Roussel, Sophie

    2015-03-01

    Listeria monocytogenes is a foodborne pathogen responsible for a severe disease known as listeriosis. The European Centre for Disease Prevention and Control (ECDC) coordinates a network of national public health laboratories (NPHLs) in charge of typing clinical strains. In food, it is the European Union Reference Laboratory for L. monocytogenes (EURL Lm), which manages a network of National Reference Laboratories (NRLs). A pulsed-field gel electrophoresis (PFGE) standard operating procedure (EURL SOP) has been used routinely at the EURL Lm since 2007. The EURL Lm has recommended that NRLs use the EURL SOP, whereas the Statens Serum Institut (SSI), under contract for ECDC, requested that NPHLs use Halpins' SOP (HSOP) published in 2010 for the PulseNet USA network. An update of Halpins' SOP (uHSOP) was published in 2013. To facilitate the exchange of profiles among human and food European reference laboratories, it is crucial to ensure that the PFGE profiles obtained with these different SOPs are comparable. The aim here was to compare the EURL SOP with HSOP and uHSOP. The panel comprised 114 well-characterized SSI/EURL strains. All were characterized at the EURL using both the EURL SOP and uHSOP. Seventy of the 114 strains were also characterized at the SSI using HSOP. The EURL SOP and uHSOP produced indistinguishable combined (ApaI/AscI) profiles for the 114 strains tested. The EURL SOP and HSOP produced indistinguishable combined profiles for 69 of the 70 strains tested. One strain displayed for the AscI profile an additional low-intensity band at 184 kbp with HSOP. For this strain, SSI and EUR Lm had already observed the same profile from NPHLs and NRLs. However, this deviation is minor as it accounted for about 1% of all the 114 combined profiles. This study should facilitate the exchange of reproducible PFGE profiles among human and food reference laboratories.

  19. Comparison of the efficacy of standard bariatric surgical procedures on Saudi population using the bariatric analysis and reporting outcome system

    Directory of Open Access Journals (Sweden)

    Azzam Al Kadi

    2017-03-01

    Full Text Available Objectives: To compare the efficacy of various standard bariatric surgical procedures using the Bariatric Analysis and Reporting Outcome System (BAROS. Methods: This is a prospective, descriptive analytical study conducted in 2 medical institutions in Saudi Arabia. A total of 270 patients who had different bariatric surgery during the period between March 2010 and December 2012 were included. The data was analyzed and scored against 3 outcomes, excess weight loss, cure or improvement of comorbidities, and quality of life changes. Results: All patients who had different bariatric procedures were included in our study. Seventy-nine (29.3% underwent laparoscopic Roux-en-Y gastric bypass (LRYGBP, 159 (58.9% had laparoscopic sleeve gastrectomy (LSG, and 32 (11.9% had laparoscopic adjustable gastric banding (LAGB. Complete remission of at least one comorbidity was reported in 36% of LRYGBP, 51% in LSG, and 42% in LAGB. While all other patients have improved comorbidities. The BAROS score was good or higher in 78.5% of LRYGBP, 83.6% for the LSG, and 84.4% of LAGB patients. The average excess weight loss was 67.9% in LRYGBP, 75.8% in LSG, and 81.7% LAGB patients. Conclusion: Bariatric surgery provides a substantial reduction in excess weight, improvement and cure of comorbidities, and improvement in quality of life. Standard bariatric procedures have different degrees of outcomes that can be beneficial in selecting appropriate procedure for appropriate indications and patients.

  20. Iodine speciation in coastal and inland bathing waters and seaweeds extracts using a sequential injection standard addition flow-batch method.

    Science.gov (United States)

    Santos, Inês C; Mesquita, Raquel B R; Bordalo, Adriano A; Rangel, António O S S

    2015-02-01

    The present work describes the development of a sequential injection standard addition method for iodine speciation in bathing waters and seaweeds extracts without prior sample treatment. Iodine speciation was obtained by assessing the iodide and iodate content, the two inorganic forms of iodine in waters. For the determination of iodide, an iodide ion selective electrode (ISE) was used. The indirect determination of iodate was based on the spectrophotometric determination of nitrite (Griess reaction). For the iodate measurement, a mixing chamber was employed (flow batch approach) to explore the inherent efficient mixing, essential for the indirect determination of iodate. The application of the standard addition method enabled detection limits of 0.14 µM for iodide and 0.02 µM for iodate, together with the direct introduction of the target water samples, coastal and inland bathing waters. The results obtained were in agreement with those obtained by ICP-MS and a colorimetric reference procedure. Recovery tests also confirmed the accuracy of the developed method which was effectively applied to bathing waters and seaweed extracts. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Analysis of urban particulate standard reference materials for the determination of chlorinated organic contaminants and additional chemical and physical properties

    Energy Technology Data Exchange (ETDEWEB)

    Poster, D.L.; Schantz, M.M.; Wise, S.A. [Analytical Chemistry Div., National Institute of Standards and Technology, Gaithersburg, MD (United States); Vangel, M.G. [Statistical Engineering Div., National Institute of Standards and Technology, Gaithersburg, MD (United States)

    1999-02-01

    A previously issued National Institute of Standards and Technology (NIST) Standard Reference Material (SRM), SRM 1649, Urban Dust/Organics has been analyzed for chlorinated organic contaminants (polychlorinated biphenyls and chlorinated pesticides) to provide certified values for a new class of compounds relative to the former certification. The material will be reissued as SRM 1649a. Four different analytical techniques were used. Specifically, two different methods of extraction (Soxhlet and pressurized fluid extraction) were used in conjunction with sample analysis by gas chromatography with two different columns (5% phenyl-methyl polysiloxane and 50% methyl C-18 dimethyl polysiloxane) that exhibit distinct selectivity, and with two different modes of detection (electron capture detection and mass spectrometry). The results from these techniques were combined to generate certified concentrations for 35 PCB congeners (some in combination) and 8 chlorinated pesticides. Ancillary assessments of additional chemical and physical properties of SRM 1649a include homogeneity, moisture, total organic carbon, extractable mass, and the particle-size distribution. The approach and the results for the certification of the PCB congeners and chlorinated pesticides in SRM 1649a, and the determination of the additional chemical and physical properties are described. In addition, the determination of PCBs and chlorinated pesticides in SRM 1648, Urban Particulate Matter (a particulate material certified for inorganic constituents), is also discussed although certified values are not presented. (orig.) With 6 figs., 4 tabs., 45 refs.

  2. Aircrew Compliance with Standard Operating Procedures as a Component of Airline Safety.

    Science.gov (United States)

    1980-01-01

    typical operating environment, the crew activity associated with it is thought to be representative of habitual behavior. In contrast, the second...Most of the participants were assigned to a single aircrew domicle. The one captain who came from a different domicile is subjectively ranked between...initiations lies in the sweeping Command and Management Procedures. They affirm that responsibility for all operational activity resides in the

  3. Proposal evaluation tool of standards and procedures for breast cancer in the province of Cienfuegos

    International Nuclear Information System (INIS)

    Fraga Suarez, Omayda; Sabates Llerandi, Teresita; Arnot Silvera, Rogelio; Torres Aja, Lidia

    2009-01-01

    Breast cancer is one of the most frequent malignancies Although Cuba and be a program with rules and procedures established a high number of women will die from cause. Objectives, design an instrument to assess compliance with the rules and procedures of breast cancer in Cienfuegos Province. Methodological design, a study was conducted descriptive, during the time period from January 2007 to January 2008, whose study group consisted of 55 women diagnosed with breast cancer at the 'Hospital Universitario Dr. Gustavo Lima Aldereguia' of Cienfuegos, the research was divided into three stages: general characterization, design of an assessment tool, criterion validation by external evaluators. Methods were used theoretical, empirical and mathematical statistics. Results, the stadiums most representative were II and III, there are delays in the performance definitive surgery, radical surgical treatments prevail, delays in the initiation of chemotherapy. Findings, there difficulties in adherence and compliance and therapeutic procedures established in the province of Cienfuegos, by which an instrument was designed for evaluation. (Author)

  4. 78 FR 54655 - Center for Devices and Radiological Health: Draft Standard Operating Procedure for Level 1...

    Science.gov (United States)

    2013-09-05

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND... challenging for the Center to communicate the change and its basis to all affected parties in a meaningful and... communication on regulatory matters, including establishing a standard practice for communicating to all...

  5. Study on Design and Implementation of JAVA Programming Procedural Assessment Standard

    Science.gov (United States)

    Tingting, Xu; Hua, Ma; Xiujuan, Wang; Jing, Wang

    2015-01-01

    The traditional JAVA course examination is just a list of questions from which we cannot know students' skills of programming. According to the eight abilities in curriculum objectives, we designed an assessment standard of JAVA programming course that is based on employment orientation and apply it to practical teaching to check the teaching…

  6. Preliminary Guidelines and Standard Operating Procedure for Drainage and Erosion Control at McMurdo Station

    Science.gov (United States)

    2014-12-01

    along the impermeable frozen soil layer. Soil freeze–thaw action disrupts soil structures, displaces soils particles, and creates voids both in...appropriate culvert replacement type (e.g., metal or plastic or concrete , etc.) and to try to standardize culverts around the Station. ER D C

  7. CTEPP STANDARD OPERATING PROCEDURE FOR HANDLING SAMPLE AND DATA CUSTODY (SOP-2.26)

    Science.gov (United States)

    This SOP describes the method for handling sample custody. A standardized Chain-of-Custody (CoC) Record is used to document the sample/data custody. Each participant is assigned one CoC Record for the samples/data collected at their home and/or day care center.

  8. Incorporation of biomagnification in procedures for environmental risk assessment and standard setting

    NARCIS (Netherlands)

    Luttik R; Traas TP; de Greef J

    1992-01-01

    Recently methods have been developed in the Netherlands to assess quality standards for the environment. Maximum permissible concentrations have been derived for direct exposure to environmental media. In 1991 two simple foodchains were analyzed at the RIVM. - Water --> Fish --> Fish-eating

  9. Documentation for assessment of modal pushover-based scaling procedure for nonlinear response history analysis of "ordinary standard" bridges

    Science.gov (United States)

    Kalkan, Erol; Kwong, Neal S.

    2010-01-01

    The earthquake engineering profession is increasingly utilizing nonlinear response history analyses (RHA) to evaluate seismic performance of existing structures and proposed designs of new structures. One of the main ingredients of nonlinear RHA is a set of ground-motion records representing the expected hazard environment for the structure. When recorded motions do not exist (as is the case for the central United States), or when high-intensity records are needed (as is the case for San Francisco and Los Angeles), ground motions from other tectonically similar regions need to be selected and scaled. The modal-pushover-based scaling (MPS) procedure recently was developed to determine scale factors for a small number of records, such that the scaled records provide accurate and efficient estimates of 'true' median structural responses. The adjective 'accurate' refers to the discrepancy between the benchmark responses and those computed from the MPS procedure. The adjective 'efficient' refers to the record-to-record variability of responses. Herein, the accuracy and efficiency of the MPS procedure are evaluated by applying it to four types of existing 'ordinary standard' bridges typical of reinforced-concrete bridge construction in California. These bridges are the single-bent overpass, multi span bridge, curved-bridge, and skew-bridge. As compared to benchmark analyses of unscaled records using a larger catalog of ground motions, it is demonstrated that the MPS procedure provided an accurate estimate of the engineering demand parameters (EDPs) accompanied by significantly reduced record-to-record variability of the responses. Thus, the MPS procedure is a useful tool for scaling ground motions as input to nonlinear RHAs of 'ordinary standard' bridges.

  10. Standardization of solvent extraction procedure for determination of uranium in seawater

    International Nuclear Information System (INIS)

    Sukanta Maity; Sahu, S.K.; Pandit, G.G.

    2015-01-01

    Solvent extraction procedure using ammonium pyrolidine dithiocarbamate complexing agent in methyl isobutyl ketone organic phase and acid exchange back-extraction is described for the simultaneous quantitative pre-concentration of uranium in seawater followed by its determination by differential pulse adsorptive stripping voltammetry. Solvent extraction time is optimized for extraction of uranium from seawater. Solvent extraction efficiency for uranium in seawater at different pH was carried out. The method gives a recovery of 98 ± 2 % for 400 mL sample at pH 3.0 ± 0.02, facilitating the rapid and interference free analysis of seawater samples. (author)

  11. A Standardized Procedure for a Pre-evaluation of the IED Instance

    Science.gov (United States)

    Panepinto, Deborah; Ruffino, Barbara; Zanetti, Mariachiara; Genon, Giuseppe

    2016-04-01

    This study presents a procedure, called EICS (Enterprise IPPC Compatibility Study) aimed at evaluating, by means of the calculation of three indexes, the compliance of the processes performed in an industrial plant with the guidelines provided by BREFs (BAT References) Documents. In fact, according to European Directive 2010/75/EU (concerning the Integrated Pollution Prevention and Control and repealing European Directive 2008/01/EC), industrial plants must require authorizations to the competent authority stating the conformity of their activity, in order to obtain this conformity they are advised to Best Available Technologies (BAT). The aim of the BATs is to avoid or minimize the impact of an industrial activity on the environment through the prevention of the atmospheric emissions, wastewater discharge and energetic consumption, and the correct waste management thus improving the efficiency of the plant. The procedure shown in the present paper has been tested on several types of industrial plant (cement plants, secondary smelt foundries, paper-mill, and automotive industries as regards their paint lines). In this paper, the application of EICS method to a cement plant is presented: the obtained results highlight a good correlation between the index values and the real situation of the plant.

  12. Biobanking human endometrial tissue and blood specimens: standard operating procedure and importance to reproductive biology research and diagnostic development.

    Science.gov (United States)

    Sheldon, Elizabeth; Vo, Kim Chi; McIntire, Ramsey A; Aghajanova, Lusine; Zelenko, Zara; Irwin, Juan C; Giudice, Linda C

    2011-05-01

    To develop a standard operating procedure (SOP) for collection, transport, storage of human endometrial tissue and blood samples, subject and specimen annotation, and establishing sample priorities. The SOP synthesizes sound scientific procedures, the literature on ischemia research, sample collection and gene expression profiling, good laboratory practices, and the authors' experience of workflow and sample quality. The National Institutes of Health, University of California, San Francisco, Human Endometrial Tissue and DNA Bank. Women undergoing endometrial biopsy or hysterectomy for nonmalignant indications. Collecting, processing, storing, distributing endometrial tissue and blood samples under approved institutional review board protocols and written informed consent from participating subjects. Standard operating procedure. The SOP addresses rigorous and consistent subject annotation, specimen processing and characterization, strict regulatory compliance, and a reference for researchers to track collection and storage times that may influence their research. The comprehensive and systematic approach to the procurement of human blood and endometrial tissue in this SOP ensures the high quality, reliability, and scientific usefulness of biospecimens made available to investigators by the National Institutes of Health, University of California, San Francisco, Human Endometrial Tissue and DNA Bank. The detail and perspective in this SOP also provides a blueprint for implementation of similar collection programs at other institutions. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  13. Contributing effect of various washing procedures and additives on the decline pattern of diethofencarb in crown daisy, a model of leafy vegetables.

    Science.gov (United States)

    Kim, Sung-Woo; Abd El-Aty, A M; Choi, Jeong-Heui; Lee, Young-Jun; Lieu, Truong T B; Chung, Hyung Suk; Rahman, Md Musfiqur; Choi, Ok-Ja; Shin, Ho-Chul; Rhee, Gyu-Seek; Chang, Moon-Ik; Kim, Hee Jung; Shim, Jae-Han

    2016-06-15

    The effects of various washing procedures, including stagnant, running, and stagnant and running tap water, and the use of washing solutions and additives, namely NaCl (1% and 2%), vinegar (2%, 5%, and 10%), detergent (0.5% and 1%), and charcoal (1% and 2%), on the reduction rate of diethofencarb were estimated in field-incurred crown daisy, a model of leafy vegetables, grown under greenhouses located in 3 different areas (Gwangju, Naju, and Muan). The original Quick, Easy, Cheap, Effective, Rugged, and Safe "QuEChERS" method was modified for extraction and liquid chromatography-tandem mass spectrometry (LC/MS/MS) was used for analysis. The recovery of diethofencarb in unwashed and washed samples was satisfactory and ranged between 84.28% and 115.32% with relative standard deviations (RSDs) of <6%. The residual levels decreased following washing with stagnant, running, and stagnant+running tap water (i.e., decline in levels increased from 65.08% to 85.02%, 69.99 to 86.79, and 74.75 to 88.96, respectively). The percentage of decline increased and ranged from 77.46% to 91.19% following washing with various solutions. Application of 1% detergent was found to be the most effective washing method for reducing the residues in crown daisy. Additionally, washing with stagnant and running tap water or even stagnant water for 5 min might reduce the residue levels substantially, making the prepared food safe for human consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Addition of Bevacizumab to Standard Radiation Therapy and Daily Temozolomide Is Associated With Minimal Toxicity in Newly Diagnosed Glioblastoma Multiforme

    Energy Technology Data Exchange (ETDEWEB)

    Vredenburgh, James J., E-mail: vrede001@mc.duke.edu [Department of Medicine, Duke University Medical Center, Durham, NC (United States); Desjardins, Annick [Department of Neurology, Duke University Medical Center, Durham, NC (United States); Kirkpatrick, John P. [Department of Radiation Oncology, Duke University Medical Center, Durham, NC (United States); Reardon, David A. [Department of Surgery, Duke University Medical Center, Durham, NC (United States); Department of Pediatrics, Duke University Medical Center, Durham, NC (United States); Peters, Katherine B. [Department of Neurology, Duke University Medical Center, Durham, NC (United States); Herndon, James E.; Marcello, Jennifer [Department of Cancer Center Biostatistics, Duke University Medical Center, Durham, NC (United States); Bailey, Leighann; Threatt, Stevie; Sampson, John; Friedman, Allan [Department of Surgery, Duke University Medical Center, Durham, NC (United States); Friedman, Henry S. [Department of Surgery, Duke University Medical Center, Durham, NC (United States); Department of Pediatrics, Duke University Medical Center, Durham, NC (United States)

    2012-01-01

    Purpose: To determine the safety of the addition of bevacizumab to standard radiation therapy and daily temozolomide for newly diagnosed glioblastoma multiforme (GBM). Methods and Materials: A total of 125 patients with newly diagnosed GBM were enrolled in the study, and received standard radiation therapy and daily temozolomide. All patients underwent a craniotomy and were at least 2 weeks postoperative. Radiation therapy was administered in 1.8-Gy fractions, with the clinical target volume for the primary course treated to a dose of 45 to 50.4 Gy, followed by a boost of 9 to 14.4 Gy, to a total dose of 59.4 Gy. Patients received temozolomide at 75 mg/m{sup 2} daily throughout the course of radiation therapy. Bevacizumab was given at 10 mg/kg intravenously every 14 days, beginning a minimum of 4 weeks postoperatively. Results: Of the 125 patients, 120 (96%) completed the protocol-specified radiation therapy. Five patients had to stop the protocol therapy, 2 patients with pulmonary emboli, and 1 patient each with a Grade 2 central nervous system hemorrhage, Grade 4 pancytopenia, and wound dehiscence requiring surgical intervention. All 5 patients ultimately finished the radiation therapy. After radiation therapy, 3 patients had progressive disease, 2 had severe fatigue and decreased performance status, 1 patient had a colonic perforation, and 1 had a rectal fissure; these 7 patients therefore did not proceed with the protocol-specified adjuvant temozolomide, bevacizumab, and irinotecan. However, 113 patients (90%) were able to continue on study. Conclusions: The addition of bevacizumab to standard radiation therapy and daily temozolomide was found to be associated with minimal toxicity in patients newly diagnosed with GBM.

  15. The use of faces as stimuli in neuroimaging and psychological experiments: a procedure to standardize stimulus features.

    Science.gov (United States)

    Gronenschild, Ed H B M; Smeets, Floortje; Vuurman, Eric F P M; van Boxtel, Martin P J; Jolles, Jelle

    2009-11-01

    In psychological experiments involving facial stimuli, it is of great importance that the basic perceptual or psychological characteristics that are investigated are not confounded by factors such as brightness and contrast, head size, hair cut and color, skin color, and the presence of glasses and earrings. Standardization of facial stimulus materials reduces the effect of these confounding factors. We therefore employed a set of basic image processing techniques to deal with this issue. The processed images depict the faces in grayscale, all at the same size, brightness, and contrast, and confined to an oval mask revealing only the basic features such as the eyes, nose, and mouth. The standardization was successfully applied to four different face databases, consisting of male and female faces and including neutral as well as happy facial expressions. An important advantage of the proposed standardization is that featural as well as configurational information is retained. We also consider the procedure to be a major contribution to the development of a de facto standard for the use of facial stimuli in psychological experiments. Such methodological standardization would allow a better comparison of the results of these studies.

  16. [Nomenclature and classification of complications. Standard procedure at the Heidelberg University Orthopedic Clinic].

    Science.gov (United States)

    Krämer, K L; Clauss, M

    1999-03-01

    In order to get a better data management of complications in orthopedic surgery and in order to get comparable statistics a standardisation of nomenclature and classification of complications is demanded since 1.1.1997. The Orthopedic University Clinic of Heidelberg started with a register of all early complications of all inpatients. According to a standardized nomenclature all occurred complications the doctors put in the data of complications in a database. These data were controlled, complemented and classified by members of the quality management group. This guideline consists of five parts: catalogue of diagnoses, general and special definitions, classification and an allocation table of diagnoses to grades of severity.

  17. Assessment of modal-pushover-based scaling procedure for nonlinear response history analysis of ordinary standard bridges

    Science.gov (United States)

    Kalkan, E.; Kwong, N.

    2012-01-01

    The earthquake engineering profession is increasingly utilizing nonlinear response history analyses (RHA) to evaluate seismic performance of existing structures and proposed designs of new structures. One of the main ingredients of nonlinear RHA is a set of ground motion records representing the expected hazard environment for the structure. When recorded motions do not exist (as is the case in the central United States) or when high-intensity records are needed (as is the case in San Francisco and Los Angeles), ground motions from other tectonically similar regions need to be selected and scaled. The modal-pushover-based scaling (MPS) procedure was recently developed to determine scale factors for a small number of records such that the scaled records provide accurate and efficient estimates of “true” median structural responses. The adjective “accurate” refers to the discrepancy between the benchmark responses and those computed from the MPS procedure. The adjective “efficient” refers to the record-to-record variability of responses. In this paper, the accuracy and efficiency of the MPS procedure are evaluated by applying it to four types of existing Ordinary Standard bridges typical of reinforced concrete bridge construction in California. These bridges are the single-bent overpass, multi-span bridge, curved bridge, and skew bridge. As compared with benchmark analyses of unscaled records using a larger catalog of ground motions, it is demonstrated that the MPS procedure provided an accurate estimate of the engineering demand parameters (EDPs) accompanied by significantly reduced record-to-record variability of the EDPs. Thus, it is a useful tool for scaling ground motions as input to nonlinear RHAs of Ordinary Standard bridges.

  18. Microspectrophotometric studies of Romanowsky stained blood cells. I. Subtraction analysis of a standardized procedure.

    Science.gov (United States)

    Galbraith, W; Marshall, P N; Bacus, J W

    1980-08-01

    This paper describes a microspectrophotometric study of blood smears stained by a simple, standardized Romanowsky technique, using only the dyes azure B and cosin. Absorbance spectra are presented for twenty-two classes of cellular object, and for the two dyes in solution, together with tabulations of spectral maxima, and suitable wavelengths for use in automated image processing. The colours of objects stained with azure B/eosin are discussed in terms of absorbance spectra. By a spectral subtraction technique, it is shown that the differential colouration of various cell structures may be explained satisfactorily in terms of the varying proportions of only four dye components. These are the monomers and dimers of azure B and eosin. Polymerization was found to occur both in solution and on binding to biopolymers. A similar analysis of a conventional Romanowsky stain would present much greater difficulties, due to the greater number of dye components, which, however, contribute little to the colours observed.

  19. Efficacy of addition of transcutaneous electrical nerve stimulation to standardized physical therapy in subacute spinal spasticity: a randomized controlled trial.

    Science.gov (United States)

    Oo, Win Min

    2014-11-01

    To study the immediate and short-term efficacy of adding transcutaneous electrical nerve stimulation (TENS) to standardized physical therapy on subacute spasticity within 6 months of spinal cord injury. Randomized controlled trial for 3 weeks. A university hospital. Subjects (N=16) with clinically determined spasticity were randomly assigned to either the experimental group (n=8) or the control group (n=8). Sixty-minute sessions of TENS over the bilateral common peroneal nerves before 30 minutes of physical therapy for the experimental group and 30 minutes of physical therapy alone for the control group. All patients in both groups had access to standardized rehabilitation care. The composite spasticity score, which included 3 subscores (ankle jerk, muscle tone, and ankle clonus scores), was used as the primary end point to assess plantar flexor spasticity. These subscores were designated as secondary end points. Serial evaluations were made at baseline before study entry and immediately after the first and last sessions in both groups. On analysis for immediate effects, there was a significant reduction only in the composite spasticity score (mean difference, 1.75; 99% confidence interval [CI], 0.47-3.03; P=.002) in the experimental group, but no significant reduction was observed in all outcome variables in the control group. A significant difference in the composite spasticity score (1.63; 99% CI, 0.14-3.11; P=.006) was observed between the 2 groups. After 15 sessions of treatment, a significant reduction was determined in the composite spasticity score (2.75; 99% CI, 1.31-4.19; Pspasticity score (2.13; 99% CI, 0.59-3.66; P=.001) and the muscle tone score (1.50; 99% CI, 0.15-2.85; P=.005) after 15 intervention sessions. Addition of TENS to standardized physical therapy had synergistically antispastic action, providing more effective reduction of clinical spasticity. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All

  20. COX-2 expression and effects of celecoxib in addition to standard chemotherapy in advanced non-small cell lung cancer.

    Science.gov (United States)

    Gulyas, Miklos; Mattsson, Johanna Sofia Margareta; Lindgren, Andrea; Ek, Lars; Lamberg Lundström, Kristina; Behndig, Annelie; Holmberg, Erik; Micke, Patrick; Bergman, Bengt

    2018-02-01

    Inhibition of cyclooxygenase-2 (COX-2) is proposed as a treatment option in several cancer types. However, in non-small cell lung cancer (NSCLC), phase III trials have failed to demonstrate a benefit of adding COX-2 inhibitors to standard chemotherapy. The aim of this study was to analyze COX-2 expression in tumor and stromal cells as predictive biomarker for COX-2 inhibition. In a multicenter phase III trial, 316 patients with advanced NSCLC were randomized to receive celecoxib (400 mg b.i.d.) or placebo up to one year in addition to a two-drug platinum-based chemotherapy combination. In a subset of 122 patients, archived tumor tissue was available for immunohistochemical analysis of COX-2 expression in tumor and stromal cells. For each compartment, COX-2 expression was graded as high or low, based on a product score of extension and intensity of positively stained cells. An updated analysis of all 316 patients included in the original trial, and of the 122 patients with available tumor tissue, showed no survival differences between the celecoxib and placebo arms (HR 1.01; 95% CI 0.81-1.27 and HR 1.12; 95% CI 0.78-1.61, respectively). High COX-2 scores in tumor (n = 71) or stromal cells (n = 55) was not associated with a superior survival outcome with celecoxib vs. placebo (HR =0.96, 95% CI 0.60-1.54; and HR =1.51; 95% CI 0.86-2.66), and no significant interaction effect between COX-2 score in tumor or stromal cells and celecoxib effect on survival was detected (p = .48 and .25, respectively). In this subgroup analysis of patients with advanced NSCLC treated within the context of a randomized trial, we could not detect any interaction effect of COX-2 expression in tumor or stromal cells and the outcome of celecoxib treatment in addition to standard chemotherapy.

  1. First principles based group additive values for the gas phase standard entropy and heat capacity of hydrocarbons and hydrocarbon radicals.

    Science.gov (United States)

    Sabbe, Maarten K; De Vleeschouwer, Freija; Reyniers, Marie-Françoise; Waroquier, Michel; Marin, Guy B

    2008-11-27

    In this work a complete and consistent set of 95 Benson group additive values (GAVs) for standard entropies S(o) and heat capacities C(p)(o) of hydrocarbons and hydrocarbon radicals is presented. These GAVs include 46 groups, among which 25 radical groups, which, to the best of our knowledge, have not been reported before. The GAVs have been determined from a set of B3LYP/6-311G(d,p) ideal gas statistical thermodynamics values for 265 species, consistently with previously reported GAVs for standard enthalpies of formation. One-dimensional hindered rotor corrections for all internal rotations are included. The computational methodology has been compared to experimental entropies (298 K) for 39 species, with a mean absolute deviation (MAD) between experiment and calculation of 1.2 J mol(-1) K(-1), and to 46 experimental heat capacities (298 K) with a resulting MAD = 1.8 J mol(-1) K(-1). The constructed database allowed evaluation of corrections on S(o) and C(p)(o) for non-nearest-neighbor effects, which have not been determined previously. The group additive model predicts the S(o) and C(p)(o) within approximately 5 J mol(-1) K(-1) of the ab initio values for 11 of the 14 molecules of the test set, corresponding to an acceptable maximal deviation of a factor of 1.6 on the equilibrium coefficient. The obtained GAVs can be applied for the prediction of S(o) and C(p)(o) for a wide range of hydrocarbons and hydrocarbon radicals. The constructed database also allowed determination of a large set of hydrogen bond increments, which can be useful for the prediction of radical thermochemistry.

  2. STANDARDIZATION OF PROCEDURES OF Plasmodium falciparum ANTIGEN PREPARATION FOR SEROLOGIC TESTS

    Directory of Open Access Journals (Sweden)

    Sandra L.M. AVILA

    1998-09-01

    Full Text Available The objective of the present study is to standardize the technical variables for preparation and storage of Plasmodium falciparum and of antigen components extracted with the amphoteric detergent Zwittergent. P. falciparum obtained from in vitro culture was stored at different temperatures and for different periods of time. For each variable, antigen components of the parasite were extracted in the presence or absence of protease inhibitors and submitted or not to later dialysis. Products were stored for 15, 30 and 60 days at different temperatures and immunological activity of each extract was determined by SDS-PAGE and ELISA using positive or negative standard sera for the presence of IgG directed to blood stage antigens of P. falciparum. Antigen extracts obtained from parasites stored at -20oC up to 10 days or at -70oC for 2 months presented the best results, showing well-defined bands on SDS-PAGE and Western blots and presenting absorbance values in ELISA that permitted safe differentiation between positive and negative sera.O objetivo deste estudo foi padronizar variáveis técnicas para o armazenamento de Plasmodium falciparum e de seus componentes antigênicos. Sedimentos de parasitas foram obtidos do cultivo in vitro de P.falciparum e estocados em diferentes temperaturas por diferentes períodos de tempo. De cada variável, foram extraídos os componentes antigênicos com detergente anfótero Zwittergent na presença e na ausência de inibidores de proteases e submetidos ou não a posterior diálise. Os produtos foram estocados por 15, 30 e 60 dias em diferentes temperaturas e caracterizados por SDS-PAGE. A atividade antigênica de cada extrato foi determinada por ELISA e Western blotting usando soros positivos e negativos para anticorpos IgG anti-formas eritrocitárias de P.falciparum. Os extratos antigênicos obtidos de parasitas estocados até 10 dias a _20ºC ou por 2 meses a _70ºC e tratados com inibidores de proteases, sob as

  3. 47 CFR 1.420 - Additional procedures in proceedings for amendment of the FM or TV Tables of Allotments, or for...

    Science.gov (United States)

    2010-10-01

    ... amendment of the FM or TV Tables of Allotments, or for amendment of certain FM assignments. 1.420 Section 1... Proceedings Rulemaking Proceedings § 1.420 Additional procedures in proceedings for amendment of the FM or TV... a UHF TV station to a VHF channel in the same community in the course of the rule making proceeding...

  4. Two-loop renormalization in the standard model, part II. Renormalization procedures and computational techniques

    Energy Technology Data Exchange (ETDEWEB)

    Actis, S. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Passarino, G. [Torino Univ. (Italy). Dipt. di Fisica Teorica; INFN, Sezione di Torino (Italy)

    2006-12-15

    In part I general aspects of the renormalization of a spontaneously broken gauge theory have been introduced. Here, in part II, two-loop renormalization is introduced and discussed within the context of the minimal Standard Model. Therefore, this paper deals with the transition between bare parameters and fields to renormalized ones. The full list of one- and two-loop counterterms is shown and it is proven that, by a suitable extension of the formalism already introduced at the one-loop level, two-point functions suffice in renormalizing the model. The problem of overlapping ultraviolet divergencies is analyzed and it is shown that all counterterms are local and of polynomial nature. The original program of 't Hooft and Veltman is at work. Finite parts are written in a way that allows for a fast and reliable numerical integration with all collinear logarithms extracted analytically. Finite renormalization, the transition between renormalized parameters and physical (pseudo-)observables, are discussed in part III where numerical results, e.g. for the complex poles of the unstable gauge bosons, are shown. An attempt is made to define the running of the electromagnetic coupling constant at the two-loop level. (orig.)

  5. OIE philosophy, policy and procedures for the development of food safety standards.

    Science.gov (United States)

    Droppers, W F G L

    2006-08-01

    Food safety was identified as a high priority area in the 2001-2005 World Organisation for Animal Health (OIE) Strategic Plan. Member Countries of the OIE considered that the organisation should be more active in issues of public health and consumer protection and that this should include more involvement in the area of diseases or pathogens transmissible through food, whether or not animals are affected by such diseases or pathogens. A permanent Working Group on Animal Production Food Safety was established in 2002 to coordinate the OIE's activities in food safety. The Working Group was requested to focus on food safety measures applicable at farm level and to monitor the ongoing cooperation between the OIE and Codex Alimentarius. More emphasis is now placed on the public health aspects of a disease when OIE standards are developed or revised. For example, the revised chapter on bovine tuberculosis in the Terrestrial Animal Health Code includes food safety recommendations for meat and meat products and for milk and milk products. The revised chapter was approved by the OIE International Committee of Member Countries at their 73rd General Session in May 2005. More chapters will follow, beginning with a chapter addressing bovine brucellosis.

  6. Diagnostic value of high-resolution CT and MR compared with standard procedures in meniscal tears

    Energy Technology Data Exchange (ETDEWEB)

    Schuler, M.; Naegele, M.; Lienemann, A.; Muench, O.; Siuda, S.; Hahn, D.; Lissner, J.

    1987-04-01

    The knees of 20 patients with evidence of meniscal tears were examined via high-resolution computed tomography (HRCT); 10 of these were studied by MRI. The HRCT study was performed directly after double-contrast arthrography (AG). For comparison with HRCT, slice orientation for MRI examination was in transverse view; gradient echo sequences using the FISP technique were applied instead of spin echo sequences. All results were correlated to the arthroscopy (AS) findings. In 95% of the cases AG and AS results agreed, HRCT/AS in 85% and MRI/AS in 70%. In certain cases HRCT provided additional information which influenced appropriate surgical treament. MRI is a noninvasive nonionising method but gives a less exact documentation of the lesion than AG and HRCT. The gradient echo mode is superior to the SE mode in respect of outlining meniscal structures, at least in transverse view.

  7. Diagnostic value of high-resolution CT and MR compared with standard procedures in meniscal tears

    International Nuclear Information System (INIS)

    Schuler, M.; Naegele, M.; Lienemann, A.; Muench, O.; Siuda, S.; Hahn, D.; Lissner, J.; Klinikum Grosshadern, Muenchen

    1987-01-01

    The knees of 20 patients with evidence of meniscal tears were examined via high-resolution computed tomography (HRCT); 10 of these were studied by MRI. The HRCT study was performed directly after double-contrast arthrography (AG). For comparison with HRCT, slice orientation for MRI examination was in transverse view; gradient echo sequences using the FISP technique were applied instead of spin echo sequences. All results were correlated to the arthroscopy (AS) findings. In 95% of the cases AG and AS results agreed, HRCT/AS in 85% and MRI/AS in 70%. In certain cases HRCT provided additional information which influenced appropriate surgical treament. MRI is a noninvasive nonionising method but gives a less exact documentation of the lesion than AG and HRCT. The gradient echo mode is superior to the SE mode in respect of outlining meniscal structures, at least in transverse view. (orig.) [de

  8. Novel femoral artery terminology: integrating anatomy and clinical procedures leading to standardized intuitive nomenclature.

    Science.gov (United States)

    Benninger, Brion

    2014-10-01

    The objective of this study is to investigate the terminology of the femoral artery and recommended alternative terminology that satisfies both anatomy and clinical arenas.The femoral artery (FA) is often defined as the continuation of the external iliac artery. Specifically, when the external iliac artery reaches directly beneath the inguinal ligament, it becomes the FA. Currently, Terminologia Anatomica (TA) records the profunda femoris or deep femoral as a terminal branch. Clinicians often use superficial femoral artery (SFA) rather than FA and profunda or deep FA. SFA is actually very deep and well protected for most of its journey. On observation, the terminology in current use is not intuitive. The objective of this study was to investigate the terminology associated with the anatomical and clinical anatomical interpretations of the FA and its terminal branches and to suggest a more appropriate terminology that addresses the points of view of the macro anatomist, as well as that of the clinician. Literature search was conducted regarding the nomenclature of the FA and its terminal branches. Dissection of 89 embalmed cadavers (49F, 40M, ages 47-89) was conducted to analyze the morphology of the FA and its branches. Perusal of the literature revealed a difference in terminology between anatomical and clinical textbooks/atlases/journals regarding the FA and its terminal branch. Our dissections suggested that the FA may be better defined vis-à-vis its relationship to the anterior and posterior compartments of the thigh. A difference in terminology exists between the anatomical and clinical arenas. A need for a standardized terminology is necessary because clinicians and their publishers have not adopted TA. This study suggests that the current FA be considered the common FA and the continuation of the FA, the SFA be renamed the anterior FA and the current profunda (the deep FA) be renamed the posterior FA, respectively. The proposed terminology mirrors the lower

  9. Development in France of nuclear safety technical regulations and standards used in the licensing procedure

    International Nuclear Information System (INIS)

    Lebouleux, P.

    1983-04-01

    Initially, the Commissariat a l'Energie Atomique was the overall structure which encompassed all nuclear activities in France, including those connected with radiological protection and nuclear safety. As other partners appeared, the Authorities have laid down national regulations relative to nuclear installations since 1963. These regulations more particularly provide for the addition of prescriptions with which the applicant must comply to obtain the necessary licenses and the establishment of General Technical Regulations pertaining to nuclear safety. The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operation of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. A RFS, or a letter, can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

  10. Development of procedures for the acquisition of metal Additive Manufacturing (AM) parts for use in the CSIR's wind tunnel models

    CSIR Research Space (South Africa)

    Johnston, C

    2015-11-04

    Full Text Available The first Additive Manufacturing (AM) non-load-bearing, client furnished part was used in the CSIR’s wind tunnels in 2007. The advent of metal-grown materials, and the acquisition of machines to grow them in South Africa, has made it feasible...

  11. Standardization and optimization of core sampling procedure for carbon isotope analysis in eucalyptus and variation in carbon isotope ratios across species and growth conditions

    CSIR Research Space (South Africa)

    Raju, M

    2011-11-01

    Full Text Available 13C is a well established surrogate for water use efficiency (WUE). However, variation due to aspect, length of branch and position In canopy can cause potential errors. Hence, experiments were conducted to standardize the sampling procedures...

  12. The crystallinity of calcium phosphate powders influenced by the conditions of neutralized procedure with citric acid additions

    International Nuclear Information System (INIS)

    Li Chengfeng

    2009-01-01

    Calcium phosphate powders with nano-sized crystallinity were synthesized by neutralization using calcium hydroxide and orthophosphoric acid with the assistance of citric acid. The influence of processing parameters, such as free or additive citric acid, synthetic temperature and ripening time, on the crystallinity of hydroxyapatite were investigated. The results of X-ray diffraction and microstructure observations showed that the crystallinity and morphology of nano-sized hydroxyapatite particles were influenced by the presence or absence of citric acid. It was found that the crystallinities and crystallite sizes of hydroxyapatite powders prepared with the additive citric acid increased with increasing synthetic temperature and ripening time. Especially, the crystallinities of (h k 0) planes were raised and more homogeneously grown particles were obtained with increasing synthetic temperature

  13. Determination of fluoride in black, green and herbal teas by ionselective electrode using a standard-addition method

    Directory of Open Access Journals (Sweden)

    Mochammad Yuwono

    2005-06-01

    Full Text Available Tea leaves are very rich in fluoride, since tea plants take up fluoride from the soil and accumulate in its leaves. Some of this fluoride is released into the infusion, which is drunk as tea. Fluoride in tea could be beneficial for the prevention of dental caries, but it may result in excessive intake and lead to enamel fluorosis. The purpose of this work was to determine the fluoride levels in 12 different brands and types of tea by means of a computer-controlled ion-selective electrode potentiometry using a standard-addition method. It is a rapid method which showed good accuracy and precision. Fluoride contents of tea infusions after 5 min ranged from 0.95 to 4.73 mg/l for black teas; from 0.70 to 1.00 mg/l for green teas, and from 0.26 to 0.27 mg/l for herbal teas. It was concluded that black teas and green teas examined may be important contributors to the total daily fluoride intake. However, the ingestion of some black teas that were found to have high fluoride content by children at the age of risk to dental fluorosis should be avoided.

  14. Substance P Antagonist Aprepitant Shows no Additive Effect Compared with Standardized Topical Treatment Alone in Patients with Atopic Dermatitis

    Directory of Open Access Journals (Sweden)

    Louise Lönndahl

    2017-12-01

    Full Text Available Atopic dermatitis (AD is a chronic, itchy, inflammatory skin disorder that may worsen due to stress and anxiety. Tachykinins have been suggested to be involved in the inflammation in AD, as well as pruritus. Aprepitant is a NK-1 receptor antagonist. This open randomized trial evaluated the effect of aprepitant added to topical treatment in adult patients with moderate–severe AD. The treatment group (n = 19 received 80 mg/day aprepitant for 7 days as a supplement to standardized topical treatment with a moderately strong steroid and a moisturizer. The control group (n = 20 received topical treatment alone. Patients were monitored for the extent of the disease (using SCORing of Atopic Dermatitis; SCORAD, pruritus, and scratching movements. In both the aprepitant-treated and the control groups there was a decrease in SCORAD, pruritus and scratching movements. However, there was no significant additional improvement in any of these parameters in the aprepitant-treated group compared with the control group.

  15. Sexual Desire and Hypoactive Sexual Desire Disorder in Women. Introduction and Overview. Standard Operating Procedure (SOP Part 1)

    DEFF Research Database (Denmark)

    Bitzer, Johannes; Giraldi, Annamaria; Pfaus, Jim

    2013-01-01

    Introduction.  Hypoactive sexual desire disorder (HSDD) is defined in Diagnostic and Statistical Manual of Mental Disorders Fourth Edition as persistent or recurrent deficiency (or absence) of sexual fantasies/thoughts, and/or desire for or receptivity to sexual activity, which causes personal......-factor models (e.g., excitation-inhibition, appetitive-consummatory) or more specific multifactorial models (in which the different components of sexual activity and their interaction are delineated). The etiology of the disorder is generally considered as multifactorial. Biomedical factors like diseases, drugs...... must be based on a biopsychosocial, multidimensional, and integrative perspective. Bitzer J, Giraldi A, and Pfaus J. Sexual desire and hypoactive sexual desire disorder in women. Introduction and overview. Standard operating procedure (SOP part 1). J Sex Med **;**:**-**....

  16. Removal of foot-and-mouth disease virus infectivity in salted natural casings by minor adaptation of standardized industrial procedures.

    Science.gov (United States)

    Wijnker, J J; Haas, B; Berends, B R

    2007-04-10

    Intestines are used for the production of natural casings as edible sausage containers. Derived from animals (pigs and sheep) experimentally infected with FMDV (initial dosage 10(7.3) PFU/ml, strain O(1Kaufbeuren)), these natural casings were treated with sodium chloride or a phosphate salts/sodium chloride mixture and the residual FMDV titres measured. After storage at about 20 degrees C, no remaining infectivity was found after either treatment, whereas casings stored at 4 degrees C still contained infectivity. Storage of salted casings at about 20 degrees C for 30 days is already part of the Standard Operating Procedures (included in HACCP) of the international casing industry and can therefore be considered as a protective measure for the international trade in natural casings.

  17. Design of standard operating procedure production proceses (case study on the home industry Bedugul Baturiti Tabanan Bali)

    Science.gov (United States)

    Kasiani; Suhantono, Djoko; Mirah Kencanawati, AAA

    2018-01-01

    Candikuning is part of the district of Baturiti, tourism village, better known by the name of Bedugul. No less interesting is the variety of chips produced by two partner groups as a souvenir after the tour, such as Chips: Spinach; beans; Tempeh. The purpose of this research were to design a Standard Operating Procedure (SOP): Production Processes on the Home Industry Bedugul Baturiti Tabanan Bali. The data technic collected use: observation; Documentation; and then interview to collect information. The data analysis technic done by using the Miles & Huberman. Result this research that the draft SOP: Production Processes Chips (Menu). The conclusion in this research SOP Production Processes use with flowchart and description on the Home Industry Bedugul Baturiti Tabanan Bali.

  18. Assessment of macrofungal diversity in a Silver Fir plantation in Sardinia (Italy using a standardized sampling procedure

    Directory of Open Access Journals (Sweden)

    Elia Ambrosio

    2015-12-01

    Full Text Available The knowledge of macrofungal diversity associated with Silver Fir forests in Italy is quite scarce. Only a little information is available about macrofungal communities from some Ligurian and Tuscan Silver Fir sites. This study aims to assess the macrofungal diversity of a Silver Fir plantation in Sardinia by the application of a standardized sampling procedure. A total of 606 sporomata were collected and 52 Basidiomycota were identified. The high value of the Shannon Index indicated a considerable level of macrofungal diversity in this plantation. The results were also compared with the diversity indices obtained by a previous 3-years long sampling methodology in the same site. The comparison of the macrofungal diversity values of the Sardinian site with those of the Ligurian Silver Fir forest revealed interesting similarities among natural versus planted coniferous forests.

  19. Standardization of digestion procedure for the determination of heavy metals in biological materials by atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Khalid, N.; Chaudhri, S.A.

    1999-01-01

    Proper decomposition of the sample is one of the basic requirements of the atomic absorption spectroscopic analysis. In the present studies, heavy metals (Cu, Fe, Mn and Zn) were determined in biological samples by designating them in a mixture of nitric acid and perchloric acid. The quantification was made with atomic absorption spectrometry using an air-acetylene flame. The reliability of the procedure used was checked by analysing standard reference materials from NBS and IAEA, such as Rice flour (NBS-SRM-1568), Horse Kidney (IAEA H-8), Mixed Human diet(IAEA H-9), Copepod (IAEA MA-A-1) and fish flesh (IAEA MA-A-2) under identical conditions. A good agreement was observed between determined and the certified values reported by NBS and IAEA. (author)

  20. Validation of standard operating procedures in a multicenter retrospective study to identify -omics biomarkers for chronic low back pain.

    Directory of Open Access Journals (Sweden)

    Concetta Dagostino

    Full Text Available Chronic low back pain (CLBP is one of the most common medical conditions, ranking as the greatest contributor to global disability and accounting for huge societal costs based on the Global Burden of Disease 2010 study. Large genetic and -omics studies provide a promising avenue for the screening, development and validation of biomarkers useful for personalized diagnosis and treatment (precision medicine. Multicentre studies are needed for such an effort, and a standardized and homogeneous approach is vital for recruitment of large numbers of participants among different centres (clinical and laboratories to obtain robust and reproducible results. To date, no validated standard operating procedures (SOPs for genetic/-omics studies in chronic pain have been developed. In this study, we validated an SOP model that will be used in the multicentre (5 centres retrospective "PainOmics" study, funded by the European Community in the 7th Framework Programme, which aims to develop new biomarkers for CLBP through three different -omics approaches: genomics, glycomics and activomics. The SOPs describe the specific procedures for (1 blood collection, (2 sample processing and storage, (3 shipping details and (4 cross-check testing and validation before assays that all the centres involved in the study have to follow. Multivariate analysis revealed the absolute specificity and homogeneity of the samples collected by the five centres for all genetics, glycomics and activomics analyses. The SOPs used in our multicenter study have been validated. Hence, they could represent an innovative tool for the correct management and collection of reliable samples in other large-omics-based multicenter studies.

  1. Revisiting olfactory classical conditioning of the proboscis extension response in honey bees: a step toward standardized procedures.

    Science.gov (United States)

    Matsumoto, Yukihisa; Menzel, Randolf; Sandoz, Jean-Christophe; Giurfa, Martin

    2012-10-15

    The honey bee Apis mellifera has emerged as a robust and influential model for the study of classical conditioning thanks to the existence of a powerful Pavlovian conditioning protocol, the olfactory conditioning of the proboscis extension response (PER). In 2011, the olfactory PER conditioning protocol celebrated its 50 years since it was first introduced by Kimihisa Takeda in 1961. In this protocol, individually harnessed honey bees are trained to associate an odor with sucrose solution. The resulting olfactory learning is fast and induces robust olfactory memories that have been characterized at the behavioral, neuronal and molecular levels. Despite the success of this protocol for studying the bases of learning and memory at these different levels, innumerable procedural variants have arisen throughout the years, which render comparative analyses of behavioral performances difficult. Moreover, because even slight variations in conditioning procedures may introduce significant differences in acquisition and retention performances, we revisit olfactory PER conditioning and define here a standardized framework for experiments using this behavioral protocol. To this end, we present and discuss all the methodological steps and details necessary for successful implementation of olfactory PER conditioning. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Do Additional Cardiac Surgical Procedures Increase the Surgical Risk in Patients 80 Years of age or Older Undergoing Coronary Bypass Gragting

    Directory of Open Access Journals (Sweden)

    Korhan Erkanlı

    2014-03-01

    Full Text Available Aim: In association with increasing life expectancy, the number of elderly individuals undergoing coronary bypass grafting (CABG and additional cardiac surgical procedures are increasing. In this study, we evaluated the effects of additional cardiac procedures and preoperative risk factors for postoperative mortality and morbidity in patients 80 years of age and older. Methods: The records of 29 patients aged 80 years and older (82.86±2.91 who had undergone coronary bypass surgery in the department of cardiac surgery between September 2009 and June 2012, were retrospectively reviewed. The subjects were divided into two groups: group 1 included the patients who had undergone CABG, group 2 consisted of those who had undergone CABG and additional cardiac procedures. Results: The mean age of the patients [14 male (48.3% 15 female (51.7%] was 82.86±2.91 years. The left internal thoracic artery was harvested for all patients. The mean number of graft per patient was 3.07±0.95. Carotid endarterectomy was performed in 3 patients before CABG. CABG and aortic valve replacement were performed in 1 patient. CABG, mitral valve replacement ant tricuspid plasty were performed in another patient. Furthermore, in one patient, abdominal aortic graft replacement due to ruptured abdominal aortic aneurysm and CABG was performed at the same session. The mean EuroSCORE was 5.06±5.16. Postoperative 30 days mortality was 6.8%, and the mean length of stay in hospital was 10.45±8.18 days. Conclusion: Coronary bypass surgery is an acceptable treatment method in patients 80 years of age and older. Although additional cardiac procedures may increase sugical risks, they can be successfully performed. (The Me­di­cal Bul­le­tin of Ha­se­ki 2014; 52: 14-8

  3. Standard Operating Procedure

    National Research Council Canada - National Science Library

    1997-01-01

    ...) plastic collection bag system. Red blood cell concentrates stored at 4 C in the 800 ml primary plastic collection bag can be biochemically modified to increase the red cell 2,3 DPG and ATP levels...

  4. Design reinforced concrete structures: Differences in procedure, formula, and results between Eurocode 2 and British Standard 8110

    Science.gov (United States)

    Rahim, Mustaqqim Abdul; Ying, Lum Chui; Shahidan, Shahiron; Ghazaly, Zuhayr Md.; Anudai, Shamilah; Bawadi, Nor Faizah; Isa, Nur Fitriah; Hassan, Zulkarnain; Habulat, Afifuddin; Ismail, Zul-Atfi

    2017-09-01

    This research is mainly about comparisons of reinforced concrete structure design based on Eurocode 2 and British Standard 8110. The reinforcement concrete element is designed by referring Eurocode 2 (EN1992-1-1) and British Standard 8110 (BS8110-1:1997) for comparing purpose. The work examples of the structural elements has been done in this research to obtain the area of reinforcement required. The differences in procedure, formula and result of area of steel required for the elements based on both of the codes are compared and tabulated. In this research, there are five part of reinforced concrete structure elements are designed which are continuous beams, one way slabs, braced and short column, pile cap, and cantilever retaining wall. From the result acquired, it shows that area of reinforcement required based on EC 2 is lesser than BS 8110 and the dimension required based on BS8110 is larger than EC 2. Meanwhile, the design based on Eurocode 2 came out with more economical structural elements compare to BS 8110 as lesser steel and concrete volume required.

  5. Assessment of the standard forensic procedure for the evaluation of psychological injury in intimate-partner violence.

    Science.gov (United States)

    Fariña, Francisca; Arce, Ramón; Vilariño, Manuel; Novo, Mercedes

    2014-01-01

    In judicial terms, a victim refers to any person who has suffered injury arising from an action or omission of an action that constitutes an offence, and the burden of proof lies with the prosecution. A review of Spanish judicial judgements underscored that the lack of evidence of psychological injury in cases of intimate-partner violence (IPV) accounted for approximately 40% of acquittals. Thus, the Spanish standard of proof for the forensic evaluation of psychological injury i.e., the MMPI-2 and the unstructured interview were assessed in order to determine if they met the statutory requirement for the assessment of psychological injury and the differential diagnosis of feigning. The results of the comparison of 51 women victims of IPV with firm convictions against their aggressors, and 54 women mock victims of IPV showed that the F, K, Fb, Fp and Ds scales, and the F-K index discriminated significantly and with medium and large effect sizes, between adjudicated and mock victims. However, the results did not provide a valid decision criterion for forensic settings i.e., false negatives (identifying feigner as honest protocols) were not classified correctly. In conclusion, the standard forensic procedure for the evaluation of psychological injury in cases of IPV did not constitute valid proof for judges who acquitted defendants on the grounds of not proven due to the lack of evidence of psychological injury.

  6. Raising the quality of rheumatology management recommendations: lessons from the EULAR process 10 years after provision of standard operating procedures.

    Science.gov (United States)

    Colebatch-Bourn, Alexandra N; Conaghan, Philip G; Arden, Nigel K; Cooper, Cyrus; Dougados, Maxime; Edwards, Christopher J

    2015-08-01

    To increase understanding of how to raise the quality of rheumatology guidelines by reviewing European League Against Rheumatism (EULAR) management recommendations, using the Appraisal of Guidelines for Research and Evaluation (AGREE) II instrument, 10 years after publication of the EULAR standardized operating procedures (SOP) for the production of recommendations. It was hoped that this work could help inform improvements in guideline development by other societies and organizations. The SOP were published in 2004 to ensure the quality of EULAR-endorsed recommendations. We reviewed 27 published EULAR recommendations for management using the AGREE II tool. This provides a framework to assess the quality of guidelines across six broad domains using 23 specific questions. Overall the EULAR recommendations reviewed have been performed to a high standard. There are particular strengths in the methodology and presentation of the guidelines; however, the results indicate areas for development in future recommendations: in particular, stakeholder involvement and applicability of the recommendations. Improvements in quality were evident in recent years, with patient representation in 9 of 15 (60.0%) recommendations published 2010-14 compared with 4 of 12 (33.3%) published 2000-09. In the last 10 years the overall quality of recommendations was good, with standards improving over the decade following publication of the SOP. However, this review process has identified potential areas for improvement, especially in patient representation and provision of implementation tools. The lessons from this work can be applied to the development of rheumatology guidelines by other societies and organizations. © The Author 2015. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  7. External quality assurance programs as a tool for verifying standardization of measurement procedures: Pilot collaboration in Europe.

    Science.gov (United States)

    Perich, C; Ricós, C; Alvarez, V; Biosca, C; Boned, B; Cava, F; Doménech, M V; Fernández-Calle, P; Fernández-Fernández, P; García-Lario, J V; Minchinela, J; Simón, M; Jansen, R

    2014-05-15

    Current external quality assurance schemes have been classified into six categories, according to their ability to verify the degree of standardization of the participating measurement procedures. SKML (Netherlands) is a Category 1 EQA scheme (commutable EQA materials with values assigned by reference methods), whereas SEQC (Spain) is a Category 5 scheme (replicate analyses of non-commutable materials with no values assigned by reference methods). The results obtained by a group of Spanish laboratories participating in a pilot study organized by SKML are examined, with the aim of pointing out the improvements over our current scheme that a Category 1 program could provide. Imprecision and bias are calculated for each analyte and laboratory, and compared with quality specifications derived from biological variation. Of the 26 analytes studied, 9 had results comparable with those from reference methods, and 10 analytes did not have comparable results. The remaining 7 analytes measured did not have available reference method values, and in these cases, comparison with the peer group showed comparable results. The reasons for disagreement in the second group can be summarized as: use of non-standard methods (IFCC without exogenous pyridoxal phosphate for AST and ALT, Jaffé kinetic at low-normal creatinine concentrations and with eGFR); non-commutability of the reference material used to assign values to the routine calibrator (calcium, magnesium and sodium); use of reference materials without established commutability instead of reference methods for AST and GGT, and lack of a systematic effort by manufacturers to harmonize results. Results obtained in this work demonstrate the important role of external quality assurance programs using commutable materials with values assigned by reference methods to correctly monitor the standardization of laboratory tests with consequent minimization of risk to patients. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Multiresidue determination of pesticides in crop plants by the quick, easy, cheap, effective, rugged, and safe method and ultra-high-performance liquid chromatography tandem mass spectrometry using a calibration based on a single level standard addition in the sample.

    Science.gov (United States)

    Viera, Mariela S; Rizzetti, Tiele M; de Souza, Maiara P; Martins, Manoel L; Prestes, Osmar D; Adaime, Martha B; Zanella, Renato

    2017-12-01

    In this study, a QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method, optimized by a 2 3 full factorial design, was developed for the determination of 72 pesticides in plant parts of carrot, corn, melon, rice, soy, silage, tobacco, cassava, lettuce and wheat by ultra-high-performance liquid chromatographic tandem mass spectrometry (UHPLC-MS/MS). Considering the complexity of these matrices and the need of use calibration in matrix, a new calibration approach based on single level standard addition in the sample (SLSAS) was proposed in this work and compared with the matrix-matched calibration (MMC), the procedural standard calibration (PSC) and the diluted standard addition calibration (DSAC). All approaches presented satisfactory validation parameters with recoveries from 70 to 120% and relative standard deviations≤20%. SLSAS was the most practical from the evaluated approaches and proved to be an effective way of calibration. Method limit of detection were between 4.8 and 48μgkg -1 and limit of quantification were from 16 to 160μgkg -1 . Method application to different kinds of plants found residues of 20 pesticides that were quantified with z-scores values≤2 in comparison with other calibration approaches. The proposed QuEChERS method combined with UHPLC-MS/MS analysis and using an easy and effective calibration procedure presented satisfactory results for pesticide residues determination in different crop plants and is a good alternative for routine analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards & Labeling Programs for Copy Machines, External Power Supplies, LED Displays, Residential Gas Cooktops and Televisions

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-03-01

    This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.

  10. Effects of twelve weeks of aerobic or strength training in addition to standard care in Parkinson's disease: a controlled study.

    Science.gov (United States)

    Demonceau, Marie; Maquet, Didier; Jidovtseff, Boris; Donneau, Anne F; Bury, Thierry; Croisier, Jean L; Crielaard, Jean M; Rodriguez de la Cruz, Carlos; Delvaux, Valérie; Garraux, Gaëtan

    2017-04-01

    Physical exercise in addition to standard care (SC) in patients with Parkinson's disease (PD) is now a common practice in many care units. However, exercises can cover a wide range of interventions, and the specific effects of different interventions still deserve to be further investigated. The aim of this study was to compare the effects of 12 weeks of two different types of physical exercises with SC in patients suffering from PD. Pseudo-randomized controlled trial. University laboratory for outcomes, University Hospital Centre for interventions. Fifty-two outpatients suffering from mild to moderate PD at baseline. Participants were allocated to three groups: the strength training (ST) group performed individualized upper and lower limbs strength training, the aerobic training (AE) group performed tailored gradual aerobic cycling, and the third group received SC. The effects of the interventions on body function were assessed by measuring isokinetic concentric peak torque for knee extension and flexion, peak oxygen consumption (VO2peak) and peak work load (PWL) during an incremental maximal cycling test. Changes in mobility were evaluated from spatial-temporal gait features measured by mean of an accelerometer system and the Six-Minute Walk Distance (6MWD) Test. We used questionnaires to estimate health-related quality of life and habitual physical activity. No significant changes in any outcome measures occurred in the SC group. More than 80% of the participants adequately completed the AE and the ST interventions. The ST group significantly improved all peak torque measures (P≤0.01), except knee extension in the least affected side (P=0.13). This group also improved the PWL (P=0.009) and 6mwd (P=0.03). The AE group improved the VO2peak (P=0.02) and PWL (Ptraining specificities, but better fitness hardly translated into better mobility and health-related quality of life. Physiotherapists can efficiently propose physical conditioning to patients with mild to

  11. Relaxation of Summer Gasoline Volatility Standard for Mecklenburg and Gaston counties, North Carolina Direct final action Additional Resources

    Science.gov (United States)

    Supporting documents on EPA's final rule that relaxes the federal Reid Vapor Pressure (RVP) standard applicable to gasoline sold in Mecklenburg and Gaston counties, North Carolina during the summer season (June 1st to September 15th) are provided.

  12. Standard Operating Procedures, ethical and legal regulations in BTB (Brain/Tissue/Bio) banking: what is still missing?

    Science.gov (United States)

    Ravid, Rivka

    2008-06-01

    The use of human biological specimens in scientific research is the focus of current international public and professional concern and a major issue in bioethics in general. Brain/Tissue/Bio banks (BTB-banks) are a rapid developing sector; each of these banks acts locally as a steering unit for the establishment of the local Standard Operating Procedures (SOPs) and the legal regulations and ethical guidelines to be followed in the procurement and dissemination of research specimens. An appropriat Code of Conduct is crucial to a successful operation of the banks and the research application they handle. What are we still missing ? (1) Adequate funding for research BTB-banks. (2) Standard evaluation protocls for audit of BTB-bank performance. (3) Internationally accepted SOP's which will facilitate exchange and sharing of specimens and data with the scientific community. (4) Internationally accepted Code of Conduct. In the present paper we review the most pressing organizational, methodological, medico-legal and ethical issues involved in BTB-banking; funding, auditing, procurement, management/handling, dissemination and sharing of specimens, confidentiality and data protection, genetic testing, "financial gain" and safety measures. Taking into consideration the huge variety of the specimens stored in different repositories and the enormous differences in medico-legal systems and ethics regulations in different countries it is strongly recommend that the health-care systems and institutions who host BTB-Banks will put more efforts in getting adequate funding for the infrastructure and daily activities. The BTB-banks should define evaluation protocols, SOPs and their Code of Conduct. This in turn will enable the banks to share the collected specimens and data with the largest possible number of researchers and aim at a maximal scientific spin-off and advance in public health research.

  13. Enumeration of heterotrophs, fecal coliforms and Escherichia coli in water: comparison of 3M Petrifilm plates with standard plating procedures.

    Science.gov (United States)

    Schraft, H; Watterworth, L A

    2005-03-01

    A total of 177 naturally contaminated water samples were analyzed by membrane filtration according to the Standard Methods for the Examination of Water and Wastewater published by the American Public Health Association. Filters were incubated in parallel on mHPC-agar and 3M Petrifilm Aerobic Count Plates (Petrifilm AC plates) for heterotrophic counts. Fecal coliforms and Escherichia coli were enumerated on mFC-agar and 3M Petrifilm E. coli/Coliform Count Plates (Petrifilm EC plates). Typical colonies on each media type were confirmed following standard procedures. Heterotrophic counts were between 10(3) and 10(4) CFU/mL and the average log10 counts obtained on Petrifilm AC plates were about two-fold lower than on mHPC-agar. Counts for fecal coliforms and E. coli were between 10(2) and 10(3) CFU/mL. Average log10 counts for confirmed fecal coliforms obtained on Petrifilm EC plates were slightly lower than on mFC agar with a correlation coefficient of 0.949. The average log10 counts for confirmed E. coli on Petrifilm EC plates and on mFC agar were statistically not different (P=0.126) with a correlation coefficient of 0.879. Specificity of Petrifilm EC plates and mFC agar was evaluated by comparing typical colony counts with confirmed counts. On mFC agar, counts for typical colonies were by 2 log10 CFU higher than the actual confirmed counts. In contrast, on Petrifilm EC plates typical colony counts were almost identical to confirmed colony counts for both fecal coliforms and E. coli. This comparison illustrates the high specificity of Petrifilm EC plates for enumeration of both fecal coliforms and E. coli in water.

  14. Standard Operating Procedures, ethical and legal regulations in BTB (Brain/Tissue/Bio) banking: what is still missing?

    Science.gov (United States)

    Ravid, Rivka

    2008-09-01

    The use of human biological specimens in scientific research is the focus of current international public and professional concern and a major issue in bioethics in general. Brain/Tissue/Bio banks (BTB-banks) are a rapid developing sector; each of these banks acts locally as a steering unit for the establishment of the local Standard Operating Procedures (SOPs) and the legal regulations and ethical guidelines to be followed in the procurement and dissemination of research specimens. An appropriat Code of Conduct is crucial to a successful operation of the banks and the research application they handle. What are we still missing ? (1) Adequate funding for research BTB-banks. (2) Standard evaluation protocls for audit of BTB-bank performance. (3) Internationally accepted SOP's which will facilitate exchange and sharing of specimens and data with the scientific community. (4) Internationally accepted Code of Conduct. In the present paper we review the most pressing organizational, methodological, medico-legal and ethical issues involved in BTB-banking; funding, auditing, procurement, management/handling, dissemination and sharing of specimens, confidentiality and data protection, genetic testing, "financial gain" and safety measures. Taking into consideration the huge variety of the specimens stored in different repositories and the enormous differences in medico-legal systems and ethics regulations in different countries it is strongly recommend that the health-care systems and institutions who host BTB-Banks will put more efforts in getting adequate funding for the infrastructure and daily activities. The BTB-banks should define evaluation protocols, SOPs and their Code of Conduct. This in turn will enable the banks to share the collected specimens and data with the largest possible number of researchers and aim at a maximal scientific spin-off and advance in public health research.

  15. Evaluasi Penerapan Standard Operating Procedure-Good Agriculture Practice (SOP-GAP pada Usahatani Padi Organik di Kabupaten Bantul

    Directory of Open Access Journals (Sweden)

    Sriyadi Sriyadi

    2016-02-01

    Full Text Available Food security has meaning not only the availability of adequate food, but also providing security for producers and consumers and ensuring environmental sustainability for sustainable production. Organic farming systems are expected to solve the problem for realizing food security and enhancement of people's welfare. The results of research indicated that, (1 The implementation level of Standard Operating Procedure-Good Agriculture Practice (SOP-GAP of Organic Rice Farming in Bantul district was quite high, (2 The implementation level of SOP-GAP of Organic Rice Farming related to the availability of capital, the selling price and the purchase price of inputs (seeds and fertilizers, (3 The level of the farmer's decision related to the implementation level of SOP-GAP of organic rice farming, and (4 development of organic rice farming required availability of sufficient capital. In this regard the government, particularly the agriculture authority and food security agency need to disburse or facilitate capital for farmers in revolving as well as low interest loans.

  16. Test Standard Revision Update: JESD57, "Procedures for the Measurement of Single-Event Effects in Semiconductor Devices from Heavy-Ion Irradiation"

    Science.gov (United States)

    Lauenstein, Jean-Marie

    2015-01-01

    The JEDEC JESD57 test standard, Procedures for the Measurement of Single-Event Effects in Semiconductor Devices from Heavy-Ion Irradiation, is undergoing its first revision since 1996. In this talk, we place this test standard into context with other relevant radiation test standards to show its importance for single-event effect radiation testing for space applications. We show the range of industry, government, and end-user party involvement in the revision. Finally, we highlight some of the key changes being made and discuss the trade-space in which setting standards must be made to be both useful and broadly adopted.

  17. Whistleblower Protection: DOD Has Improved Oversight for Reprisal Investigations, but Can Take Additional Actions to Standardize Process and Reporting

    Science.gov (United States)

    2016-09-07

    WHISTLEBLOWER PROTECTION DOD Has Improved Oversight for Reprisal Investigations, but Can Take Additional Actions to...House of Representatives September 7, 2016 WHISTLEBLOWER PROTECTION DOD Has Improved Oversight for Reprisal Investigations, but Can Take Additional...improve its tracking of the timeliness of military whistleblower reprisal investigations in response to recommendations that GAO made in 2012 and 2015

  18. Final Rule for Control of Air Pollution from Aircraft and Aircraft Engines: Emission Standards and Test Procedures

    Science.gov (United States)

    EPA is amending the existing emission standards for oxides of nitrogen (NOx) for new commercial aircraft engines. These standards are equivalent to the NOx emission standards of the United Nations International Civil Aviation Organization (ICAO).

  19. Direct Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

    Science.gov (United States)

    This rule will adopt the current voluntary NOx and CO emissions standards of the United Nations International Civil Aviation Organization (ICAO), bringing the United States aircraft standards into alignment with the international standards.

  20. 49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

    Science.gov (United States)

    2010-10-01

    ... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... tariff structure modifies in a relatively non-uniform fashion the relationship between most rates...

  1. 78 FR 11791 - Flavored Milk; Petition to Amend the Standard of Identity for Milk and 17 Additional Dairy Products

    Science.gov (United States)

    2013-02-20

    ... requested that FDA make similar changes to the standards of identity for yogurt and cultured milk. Among... and reduce childhood obesity by providing for lower-calorie flavored milk products. They state that lower-calorie flavored milk would particularly benefit school children who, according to IDFA and NMPF...

  2. A prospective case control comparison of the ZeroGravity system versus a standard lead apron as radiation protection strategy in neuroendovascular procedures.

    Science.gov (United States)

    Haussen, Diogo C; Van Der Bom, Imramsjah Martijn John; Nogueira, Raul G

    2016-10-01

    We aimed to compare the performance of the ZeroGravity (ZG) system (radiation protection system composed by a suspended lead suit) against the use of standard protection (lead apron (LA), thyroid shield, lead eyeglasses, table skirts, and ceiling suspended shield) in neuroangiography procedures. Radiation exposure data were prospectively collected in consecutive neuroendovascular procedures between December 2014 and February 2015. Operator No 1 was assigned to the use of an LA (plus lead glasses, thyroid shield, and a 1 mm hanging shield at the groin) while operator No 2 utilized the ZG system. Dosimeters were used to measure peak skin dose for the head, thyroid, and left foot. The two operators performed a total of 122 procedures during the study period. The ZG operator was more commonly the primary operator compared with the LA operator (85% vs 71%; p=0.04). The mean anterior-posterior (AP), lateral, and cumulative dose area product (DAP) radiation exposure as well as the mean fluoroscopy time were not statistically different between the operators' cases. The peak skin dose to the head of the operator with LA was 2.1 times higher (3380 vs 1600 μSv), while the thyroid was 13.9 (4460 vs 320 μSv), the mediastinum infinitely (520 vs 0 μSv), and the foot 3.3 times higher (4870 vs 1470 μSv) compared with the ZG operator, leading to an overall accumulated dose 4 times higher. The ratio of cumulative operator received dose/total cumulative DAP was 2.5 higher on the LA operator. The ZG radiation protection system leads to substantially lower radiation exposure to the operator in neurointerventional procedures. However, substantial exposure may still occur at the level of the lens and thyroid to justify additional protection. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  3. [Falling Short of Minimum Volume Standards, Exemptions and Their Consequences from 2018 Onwards. Complex Procedures on Oesophagus and Pancreas in German Hospitals from 2006 to 2014].

    Science.gov (United States)

    de Cruppé, Werner; Geraedts, Max

    2018-03-16

    The minimum volume standards for hospitals in Germany, in force since 2004, provide four exemptions for non-complying hospitals. This study investigates the extent and importance of these exemptions for complex procedures on the oesophagus and pancreas for all non-complying hospitals and for the revised minimum volume regulations in force since the beginning of 2018. Longitudinal, descriptive analyses of data on minimum volume standards and their exemptions for complex procedures on the oesophagus and pancreas, as presented by the hospital quality report cards of the reporting years from 2006 to 2014. For each year and both procedures, about 120 hospitals with some 500 cases report non-compliance with the minimum volume standards. Of these a third report no exemptions (with 180 procedures), a third state emergencies (110), and another third report exemptions due to internal hospital restructuring (210). Ensuring geographical access to care as an exemption is of no importance. After the three year exemption period for installation of a new service line, 20% of the hospitals with procedures on the oesophagus and 30% on the pancreas complied with the minimum volume standards. After the two-year period for staff realignment, the figures were 40 and 50%, respectively. Exemptions do not entirely explain all procedures performed by hospitals not complying with the minimum volume standards. The revised minimum volume regulations' restructuring of exemptions to "emergencies" and "new or renewed service lines" with a two year exemption period, are concordant with the empirical findings of this study. Georg Thieme Verlag KG Stuttgart · New York.

  4. The tsunami probabilistic risk assessment (PRA). Example of accident sequence analysis of tsunami PRA according to the standard for procedure of tsunami PRA for nuclear power plants

    International Nuclear Information System (INIS)

    Ohara, Norihiro; Hasegawa, Keiko; Kuroiwa, Katsuya

    2013-01-01

    After the Fukushima Daiichi nuclear power plant (NPP) accident, standard for procedure of tsunami PRA for NPP had been established by the Standardization Committee of AESJ. Industry group had been conducting analysis of Tsunami PRA for PWR based on the standard under the cooperation with electric utilities. This article introduced overview of the standard and examples of accident sequence analysis of Tsunami PRA studied by the industry group according to the standard. The standard consisted of (1) investigation of NPP's composition, characteristics and site information, (2) selection of relevant components for Tsunami PRA and initiating events and identification of accident sequence, (3) evaluation of Tsunami hazards, (4) fragility evaluation of building and components and (5) evaluation of accident sequence. Based on the evaluation, countermeasures for further improvement of safety against Tsunami could be identified by the sensitivity analysis. (T. Tanaka)

  5. U.S. Geological Survey Noble Gas Laboratory’s standard operating procedures for the measurement of dissolved gas in water samples

    Science.gov (United States)

    Hunt, Andrew G.

    2015-08-12

    This report addresses the standard operating procedures used by the U.S. Geological Survey’s Noble Gas Laboratory in Denver, Colorado, U.S.A., for the measurement of dissolved gases (methane, nitrogen, oxygen, and carbon dioxide) and noble gas isotopes (helium-3, helium-4, neon-20, neon-21, neon-22, argon-36, argon-38, argon-40, kryton-84, krypton-86, xenon-103, and xenon-132) dissolved in water. A synopsis of the instrumentation used, procedures followed, calibration practices, standards used, and a quality assurance and quality control program is presented. The report outlines the day-to-day operation of the Residual Gas Analyzer Model 200, Mass Analyzer Products Model 215–50, and ultralow vacuum extraction line along with the sample handling procedures, noble gas extraction and purification, instrument measurement procedures, instrumental data acquisition, and calculations for the conversion of raw data from the mass spectrometer into noble gas concentrations per unit mass of water analyzed. Techniques for the preparation of artificial dissolved gas standards are detailed and coupled to a quality assurance and quality control program to present the accuracy of the procedures used in the laboratory.

  6. Random access procedures and radio access network (RAN) overload control in standard and advanced long-term evolution (LTE and LTE-A) networks

    DEFF Research Database (Denmark)

    Kiilerich Pratas, Nuno; Thomsen, Henning; Popovski, Petar

    2015-01-01

    In this chapter, we describe and discuss the current LTE random access procedure and the Radio Access Network Load Control solution within LTE/LTE-A. We provide an overview of the several considered load control solutions and give a detailed description of the standardized Extended Access Class B...

  7. Diagnosis and dosimetry of exposure to sulfur mustard: Development of a standard operating procedure for hemoglobin adducts: Exploratory research on albumin and keratin adducts

    NARCIS (Netherlands)

    Noort, D.; Fidder, A.; Jong, L.P.A. de; Schans, G.P. van der; Benschop, H.P.

    2000-01-01

    A standard operating procedure (SOP) for determination of the sulfur mustard adduct to the N-terminal valine in hemoglobin was developed. By using this SOP, it was found that the Nterminal valine adduct in globin of hairless guinea pigs and marmosets which had been exposed to sulfur mustard (0.5

  8. An umbrella protocol for standardized data collection (SDC) in rectal cancer: a prospective uniform naming and procedure convention to support personalized medicine.

    Science.gov (United States)

    Meldolesi, Elisa; van Soest, Johan; Dinapoli, Nicola; Dekker, Andre; Damiani, Andrea; Gambacorta, Maria Antonietta; Valentini, Vincenzo

    2014-07-01

    Predictive models allow treating physicians to deliver tailored treatment moving from prescription by consensus to prescription by numbers. The main features of an umbrella protocol for standardizing data and procedures to create a consistent dataset useful to obtain a trustful analysis for a Decision Support System for rectal cancer are reported. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  9. Diagnosis and dosimetry of exposure to sulfur mustard: Development of a standard operating procedure for mass spectrometric analysis of haemoglobin adducts - Exploratory research on albumin and keratin adducts

    NARCIS (Netherlands)

    Noort, D.; Fidder, A.; Hulst, A.G.; Jong, L.P.A. de; Benschop, H.P.

    2000-01-01

    Experiments were carried out to develop a standard operating procedure for analysis of sulfur mustard adducts to the N-terminal valine in haemoglobin and to explore adduct formation with albumin and keratin. In the first approach, gas chromatography-negative chemical ionization/mass spectrometry

  10. A Guide for Developing Standard Operating Job Procedures for the Activated Sludge - Aeration & Sedimentation Process Wastewater Treatment Facility. SOJP No. 5.

    Science.gov (United States)

    Mason, George J.

    This guide for developing standard operating job procedures for wastewater treatment facilities is devoted to the activated sludge aeration and sedimentation process. This process is for conversion of nonsettleable and nonfloatable materials in wastewater to settleable, floculated biological groups and separation of the settleable solids from the…

  11. Transfer of near-infrared calibration model for determining fiber content in flax: effects of transfer samples and standardization procedure.

    Science.gov (United States)

    Sohn, Miryeong; Barton, Franklin E; Himmelsbach, David S

    2007-04-01

    The transfer of a calibration model for determining fiber content in flax stem was accomplished between two near-infrared spectrometers, which are the same brand but which require a standardization. In this paper, three factors, including transfer sample set, spectral type, and standardization method, were investigated to obtain the best standardization result. Twelve standardization files were produced from two sets of the transfer sample (sealed reference standards and a subset of the prediction set), two types of the transfer sample spectra (raw and preprocessed spectra), and three standardization methods (direct standardization (DS), piecewise direct standardization (PDS), and double window piecewise direct standardization (DWPDS)). The efficacy of the model transfer was evaluated based on the root mean square error of prediction, calculated using the independent prediction samples. Results indicated that the standardization using the sealed reference standards was unacceptable, but the standardization using the prediction subset was adequate. The use of the preprocessed spectra of the transfer samples led to the calibration transfers that were successful, especially for the PDS and the DWPDS correction. Finally, standardization using the prediction subset and their preprocessed spectra with DWPDS correction proved to be the best method for transferring the model.

  12. 16 CFR 1616.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

    Science.gov (United States)

    2010-01-01

    ... SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF CHILDREN'S SLEEPWEAR... converter) initially introducing items subject to the Standard into commerce to group items into production units, and to test samples from each production unit. See 16 CFR 1616.4. The Standard prescribes an...

  13. 16 CFR 1615.35 - Use of alternate apparatus, procedures, or criteria for testing under the standard.

    Science.gov (United States)

    2010-01-01

    ... SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF CHILDREN'S SLEEPWEAR... converter) initially introducing items subject to the Standard into commerce to group items into production units, and to test samples from each production unit. See 16 CFR 1615.4 (b), (c) and (d). The Standard...

  14. PENYUSUNAN DRAFT STANDARD OPERATING PROCEDURE (SOP PENGOLAHAN KERIPIK PISANG (STUDI KASUS DI SALAH SATU INDUSTRI RUMAH TANGGA KERIPIK PISANG BANDAR LAMPUNG

    Directory of Open Access Journals (Sweden)

    Didit Haryanto

    2013-09-01

    Full Text Available Standard operating procedure (SOP is a procedure or steps which is standardized and must be passed to complete a particular work process. Arranging SOP draft is based on a review of Good Manufacture Practice. SOP is made for being a guide line in doing process in an industry. Purposes of this research is arranging SOP draft for home industries of banana chips making, so the product will meet the standard. In this research, drafting standard operating procedure (SOP of the banana chips industry was begun with observating and recording every detail process. The research was conducted through four steps. Firstly, field observation to observate  process, including sanitation, tools specification, and description about step of processing banana chips. Second step was determining the critical point and optimating the condition. The next step was arranging the SOP draft. The last was the testing of SOP draft. Then the data were compared and discussed descriptively.  The result was a SOP draft which was used as in processing banana chips the products consistenly had meet the standard quality of SNI 01-4315-1996, they include moisture content, ash content, fat content, wholeness, with flavor, aroma, color, and texture.  The analysis data are, Moisture content (0,17%, ash content (1,35%, fat content (27,90% and wholeness (88,00%. Otherwise the data analysis for banana chips that produce without SOP are, moisture content (0,15%, ash content (1,88%, fat content (39,41% and wholeness (83,00%. Keywords: standard operating procedure (SOP, banana chips, consistency of quality

  15. Who benefits from additional drug counseling among prescription opioid-dependent patients receiving buprenorphine-naloxone and standard medical management?

    Science.gov (United States)

    Weiss, Roger D; Griffin, Margaret L; Potter, Jennifer Sharpe; Dodd, Dorian R; Dreifuss, Jessica A; Connery, Hilary S; Carroll, Kathleen M

    2014-07-01

    In the multi-site Prescription Opioid Addiction Treatment Study (POATS), conducted within the National Drug Abuse Clinical Trials Network, participants randomly assigned to receive individual drug counseling in addition to buprenorphine-naloxone and medical management did not have superior opioid use outcomes. However, research with other substance-dependent populations shows that subgroups of participants may benefit from a treatment although the entire population does not. We conducted a secondary analysis of POATS data to determine whether a subgroup of participants benefited from drug counseling in addition to buprenorphine-naloxone and medical management, either due to greater problem severity or more exposure to counseling as a result of greater treatment adherence. Problem severity was measured by a history of heroin use, higher Addiction Severity Index drug composite score, and chronic pain. Adequate treatment adherence was defined a priori as attending at least 60% of all offered sessions. Patients who had ever used heroin and received drug counseling were more likely to be successful (i.e., abstinent or nearly abstinent from opioids) than heroin users who received medical management alone, but only if they were adherent to treatment and thus received adequate exposure to counseling (OR=3.7, 95% CI=1.1-11.8, p=0.03). The association between severity and outcome did not vary by treatment condition for chronic pain or ASI drug severity score. These findings emphasize the importance of treatment adherence, and suggest that patients with prescription opioid dependence are a heterogeneous group, with different optimal treatment strategies for different subgroups. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  16. Diagnosis and Dosimetry of Exposure to Sulfur Mustard: Development of Standard Operating Procedures; Further Exploratory Research on Protein Adducts

    National Research Council Canada - National Science Library

    Benschop, H

    1999-01-01

    .... Both procedures could be substantially shortened, while their sensitivities were improved. Furthermore, exploratory research is performed aiming at the development of a fieldable immunochemical assay for sulfur mustard adducts with proteins, i.e...

  17. Tools, harmonization and standardization procedures of the impact and outcome evaluation indices obtained during a kindergarten-based, family-involved intervention to prevent obesity in early childhood: the ToyBox-study.

    Science.gov (United States)

    Mouratidou, T; Miguel, M L; Androutsos, O; Manios, Y; De Bourdeaudhuij, I; Cardon, G; Kulaga, Z; Socha, P; Galcheva, S; Iotova, V; Payr, A; Koletzko, B; Moreno, L A

    2014-08-01

    The ToyBox-intervention is a kindergarten-based, family-involved intervention targeting multiple lifestyle behaviours in preschool children, their teachers and their families. This intervention was conducted in six European countries, namely Belgium, Bulgaria, Germany, Greece, Poland and Spain. The aim of this paper is to provide a descriptive overview of the harmonization and standardization procedures of the baseline and follow-up evaluation of the study (and substudies). Steps related to the study's operational, standardization and harmonization procedures as well as the impact and outcome evaluation assessment tools used are presented. Experiences from the project highlight the importance of safeguarding the measurement process to minimize data heterogeneity derived from potential measurement error and country-by-country differences. In addition, it was made clear that continuing quality control and support is an important component of such studies. For this reason, well-supported communication channels, such as regular email updates and teleconferences, and regular internal and external meetings to ensure smooth and accurate implementation were in place during the study. The ToyBox-intervention and its harmonized and standardized procedures can serve as a successful case study for future studies evaluating the efficacy of similar interventions. © 2014 World Obesity.

  18. Effective reduction of fluoroscopy duration by using an advanced electroanatomic-mapping system and a standardized procedural protocol for ablation of atrial fibrillation: 'the unleaded study'.

    Science.gov (United States)

    Knecht, Sven; Sticherling, Christian; Reichlin, Tobias; Pavlovic, Nikola; Mühl, Aline; Schaer, Beat; Osswald, Stefan; Kühne, Michael

    2015-11-01

    It is recommended to keep exposure to ionizing radiation as low as reasonably achievable. The aim of this study was to determine whether fluoroscopy-free mapping and ablation using a standardized procedural protocol is feasible in patients undergoing pulmonary vein isolation (PVI). Sixty consecutive patients were analysed: Thirty consecutive patients undergoing PVI using Carto3 were treated using a standardized procedural fluoroscopy protocol with X-ray being disabled after transseptal puncture (Group 1) and compared with a set of previous 30 consecutive patients undergoing PVI without a specific recommendation regarding the use of fluoroscopy (Group 2). The main outcome measures were the feasibility of fluoroscopy-free mapping and ablation, total fluoroscopy time, total dose area product (DAP), and procedure time. Sixty patients (age 60 ± 10 years, 73% male, ejection fraction 0.55 ± 0.09, left atrium 42 ± 8 mm) were included. In Group 1, total fluoroscopy time was 4.2 (2.6-5.6) min and mapping and ablation during PVI without using fluoroscopy was feasible in 29 of 30 patients (97%). In Group 2, total fluoroscopy time was 9.3 (6.4-13.9) min (P fluoroscopy after transseptal puncture using a standardized procedural protocol is feasible in almost all patients and is associated with markedly decreased total fluoroscopy duration and DAP. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2015. For permissions please email: journals.permissions@oup.com.

  19. Rapid Quantification of Melamine in Different Brands/Types of Milk Powders Using Standard Addition Net Analyte Signal and Near-Infrared Spectroscopy

    Directory of Open Access Journals (Sweden)

    Bang-Cheng Tang

    2016-01-01

    Full Text Available Multivariate calibration (MVC and near-infrared (NIR spectroscopy have demonstrated potential for rapid analysis of melamine in various dairy products. However, the practical application of ordinary MVC can be largely restricted because the prediction of a new sample from an uncalibrated batch would be subject to a significant bias due to matrix effect. In this study, the feasibility of using NIR spectroscopy and the standard addition (SA net analyte signal (NAS method (SANAS for rapid quantification of melamine in different brands/types of milk powders was investigated. In SANAS, the NAS vector of melamine in an unknown sample as well as in a series of samples added with melamine standards was calculated and then the Euclidean norms of series standards were used to build a straightforward univariate regression model. The analysis results of 10 different brands/types of milk powders with melamine levels 0~0.12% (w/w indicate that SANAS obtained accurate results with the root mean squared error of prediction (RMSEP values ranging from 0.0012 to 0.0029. An additional advantage of NAS is to visualize and control the possible unwanted variations during standard addition. The proposed method will provide a practically useful tool for rapid and nondestructive quantification of melamine in different brands/types of milk powders.

  20. Differentiation of malignant from benign soft tissue tumours: use of additive qualitative and quantitative diffusion-weighted MR imaging to standard MR imaging at 3.0 T

    International Nuclear Information System (INIS)

    Lee, So-Yeon; Jee, Won-Hee; Jung, Joon-Yong; Park, Michael Y.; Kim, Sun-Ki; Jung, Chan-Kwon; Chung, Yang-Guk

    2016-01-01

    To determine the added value of diffusion-weighted imaging (DWI) to standard magnetic resonance imaging (MRI) to differentiate malignant from benign soft tissue tumours at 3.0 T. 3.0 T MR images including DWI in 63 patients who underwent surgery for soft tissue tumours were retrospectively analyzed. Two readers independently interpreted MRI for the presence of malignancy in two steps: standard MRI alone, standard MRI and DWI with qualitative and quantitative analysis combined. There were 34 malignant and 29 non-malignant soft tissue tumours. In qualitative analysis, hyperintensity relative to skeletal muscle was more frequent in malignant than benign tumours on DWI (P=0.003). In quantitative analysis, ADCs of malignant tumours were significantly lower than those of non-malignant tumours (P≤0.002): 759±385 vs. 1188±423 μm 2 /sec minimum ADC value, 941±440 vs. 1310±440 μm 2 /sec average ADC value. The mean sensitivity, specificity and accuracy of both readers were 96 %, 72 %, and 85 % on standard MRI alone and 97 %, 90 %, and 94 % on standard MRI with DWI. The addition of DWI to standard MRI improves the diagnostic accuracy for differentiation of malignant from benign soft tissue tumours at 3.0 T. (orig.)

  1. Post-procedural Care in Interventional Radiology: What Every Interventional Radiologist Should Know—Part I: Standard Post-procedural Instructions and Follow-Up Care

    Energy Technology Data Exchange (ETDEWEB)

    Taslakian, Bedros, E-mail: Bedros.Taslakian@nyumc.org; Sridhar, Divya [NYU Langone Medical Center, Department of Radiology, Interventional Radiology Section (United States)

    2017-04-15

    Interventional radiology (IR) has evolved into a full-fledged clinical specialty with attendant patient care responsibilities. Success in IR now requires development of a full clinical practice, including consultations, inpatient admitting privileges, and an outpatient clinic. In addition to technical excellence and innovation, maintaining a comprehensive practice is imperative for interventional radiologists to compete successfully for patients and referral bases. A structured approach to periprocedural care, including routine follow-up and early identification and management of complications, facilitates efficient and thorough management with an emphasis on quality and patient safety.

  2. Assessing the reliability of the borderline regression method as a standard setting procedure for objective structured clinical examination

    Directory of Open Access Journals (Sweden)

    Sara Mortaz Hejri

    2013-01-01

    Full Text Available Background: One of the methods used for standard setting is the borderline regression method (BRM. This study aims to assess the reliability of BRM when the pass-fail standard in an objective structured clinical examination (OSCE was calculated by averaging the BRM standards obtained for each station separately. Materials and Methods: In nine stations of the OSCE with direct observation the examiners gave each student a checklist score and a global score. Using a linear regression model for each station, we calculated the checklist score cut-off on the regression equation for the global scale cut-off set at 2. The OSCE pass-fail standard was defined as the average of all station′s standard. To determine the reliability, the root mean square error (RMSE was calculated. The R2 coefficient and the inter-grade discrimination were calculated to assess the quality of OSCE. Results: The mean total test score was 60.78. The OSCE pass-fail standard and its RMSE were 47.37 and 0.55, respectively. The R2 coefficients ranged from 0.44 to 0.79. The inter-grade discrimination score varied greatly among stations. Conclusion: The RMSE of the standard was very small indicating that BRM is a reliable method of setting standard for OSCE, which has the advantage of providing data for quality assurance.

  3. Determination of Cu, Co and Pb in gasoline by electrothermal atomic absorption spectrometry using aqueous standard addition in gasoline-ethanol-water three-component system

    Energy Technology Data Exchange (ETDEWEB)

    Ozcan, Mustafa [Istanbul Technical University, Science and Letters Faculty, Chemistry Department, 34469 Maslak Istanbul (Turkey)]. E-mail: ozcanm@itu.edu.tr; Akman, Suleyman [Istanbul Technical University, Science and Letters Faculty, Chemistry Department, 34469 Maslak Istanbul (Turkey)

    2005-03-31

    Single phase gasoline-ethanol-water mixture was prepared for performing standardization with aqueous standards and for the elimination of difficulties with pipetting of gasoline. Standard addition calibration method was applied to the determination of Cu, Pb and Co in gasoline by electrothermal atomic absorption spectrometry. Good agreements were found for the analysis results of the present 'direct' method compared with those obtained by digesting gasoline in microwave furnace with nitric acid. The limit of detection values were 1.5 {mu}g kg{sup -1} Co, 2.5 {mu}g kg{sup -1} Cu and 4.0 {mu}g kg{sup -1} Pb in original gasoline samples.

  4. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    Energy Technology Data Exchange (ETDEWEB)

    Fridley, David; Zheng, Nina; Zhou, Nan

    2010-06-01

    Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labeling programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and

  5. Observation of the Standard Model Higgs boson and search for an additional scalar in the $\\ell^+\\ell^−\\ell^+\\ell^−$ final state with the ATLAS detector

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00230799

    This thesis presents the observation of a Standard Model Higgs boson ($h$) and a search for an additional scalar ($H$) in the $h/H \\to ZZ^{(∗)} \\to \\ell^+\\ell^−\\ell^+\\ell^−$ channel (four-lepton channel), where l stands for either an electron or a muon. The observation of a Standard Model Higgs boson in the four-lepton channel uses the proton–proton collision data collected with the ATLAS detector during 2011 and 2012 at center- of-mass energies of 7 and 8 TeV. An excess with a local significance of 8.1 standard deviation is observed in the four-lepton invariant mass spectrum around 125 GeV. The mass of the excess measured in $ \\ell^+\\ell^−\\ell^+\\ell^−$ channel is 125.51 $\\pm$ 0.52 GeV. Further measurements on the production cross section times branching ratio of the excess agree well with the Standard Model predictions within the experimental uncertainties. The search for an additional scalar uses an integrated luminosity of 36.1 fb$^{−1}$ proton–proton collision data at a center-of-mass ener...

  6. Use of a simplified generalized standard additions method for the analysis of cement, gypsum and basic slag by slurry nebulization ICP-OES.

    Science.gov (United States)

    Marjanovic, Ljiljana; McCrindle, Robert I; Botha, Barend M; Potgieter, Herman J

    2004-05-01

    The simplified generalized standard additions method (GSAM) was investigated as an alternative method for the ICP-OES analysis of solid materials, introduced into the plasma in the form of slurries. The method is an expansion of the conventional standard additions method. It is based on the principle of varying both the sample mass and the amount of standard solution added. The relationship between the sample mass, standard solution added and signal intensity is assumed to be linear. Concentration of the analyte can be found either geometrically from the slope of the two-dimensional response plane in a three-dimensional space or mathematically from the ratio of the parameters estimated by multiple linear regression. The analysis of a series of certified reference materials (CRMs) (cement CRM-BCS No 353, gypsum CRM-Gyp A and basic slag CRM No 382/I) introduced into the plasma in the form of slurry is described. The slurries contained glycerol and hydrochloric acid and were placed in an ultrasonic bath to ensure good dispersion. "Table curve 3D" software was used to fit the data. Results obtained showed that the method could be successfully applied to the analysis of cement, gypsum and slag samples, without the need to dissolve them. In this way, we could avoid the use of hazardous chemicals (concentrated acids), incomplete dissolution and loss of some volatiles. The application of the simplified GSAM for the analysis did not require a CRM with similar chemical and mineralogical properties for the calibration of the instrument.

  7. Acromioclavicular joint dislocation treated with Bosworth screw and additional K-wiring: results after 7.8 years - still an adequate procedure?

    Science.gov (United States)

    Tiefenboeck, Thomas M; Popp, Domenik; Boesmueller, Sandra; Payr, Stephan; Joestl, Julian; Komjati, Micha; Binder, Harald; Schurz, Mark; Ostermann, Roman C

    2017-08-04

    The acromioclavicular (AC) joint dislocation is a major reason for shoulder instability. Different concepts of treatment and surgical methods are described in the literature. Thus, the purpose of this study was to present our data of long-term follow-up of patients having undergone treatment of acromioclavicular (AC) joint dislocation using the Bosworth Screw with additional K-wiring. This study was conducted as a retrospective single centre data analysis. All patients treated operatively for AC joint dislocation with a Bosworth screw and additional K-wire fixation at our Department were asked to participate in this study. The study population consisted of 22 patients, 20 male and 2 female, with a mean age of 40 years ±15.6 years. Three grade-II lesions, 13 grade-III lesions, four grade-IV lesions and two grade-V lesions according to the Rockwood classification were found. The overall mean clinical outcome at the latest follow up was: Constant 95, DASH 6.4, ASES 94.6, SST 99.02, UCLA 33.1, ACJI 91.82 and VAS 0.29 - representing a good-to-excellent long-term outcome in all patients after at least 2 years follow-up (range; 2 - 19 years). Overall, 19 patients (86%) reported to be very satisfied with the achieved result, 15 patients (68%) reported to be able to participate in every sports activity and 16 patients (73%) reported to be able to perform their daily work without limitations. Overall, complications occurred in three patients (14%). Only one patient remained unsatisfied with the achieved result. Summarizing, our reported results showed that surgical fixation of acute AC joint dislocation with a Bosworth screw and additional K-wire fixation leads to good-to-excellent functional outcome and highly satisfactory results in the majority of patients. Despite its complications, in accordance with our results, Bosworth screw fixation with additional K-wiring in AC joint dislocation represents an adequate surgical procedure. Level IV, retrospective study.

  8. Development and evaluation of Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in a Nuclear Medicine Service

    International Nuclear Information System (INIS)

    Krempser, Alexandre R.; Soares, Alexandre B.; Corbo, Rossana

    2011-01-01

    The quality management in Nuclear Medicine Services is a requirement of national and international standards. The Brazilian regulatory agency in health surveillance, the Agencia Nacional de Vigilancia Sanitaria (ANVISA), in its Resolucao de Diretoria Colegiada (Collegiate Directory Resolution) no. 38, requires the elaboration of documents describing the technical and clinical routine activities. This study aimed to elaborate, implement and evaluate Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in the Nuclear Medicine Service of a university hospital. Eighteen SOPs were developed, involving tasks related to dose calibrator, gamma camera, Geiger-Muller detectors and radiological protection activities. The performance of its application was evaluated for a period of six months. It was observed a reduction in 75% of reported operational errors and 42% of the number of reported incidents with contamination by radioactive material. The SOPs were adequate and successful in its application. New procedures involving clinical activities will also be developed and evaluated. (author)

  9. Coracoid bone graft osteolysis after Latarjet procedure: A comparison study between two screws standard technique vs mini-plate fixation

    Science.gov (United States)

    Giacomo, Giovanni Di; Costantini, Alberto; de Gasperis, Nicola; De Vita, Andrea; Lin, Bernard K. H.; Francone, Marco; Beccaglia, Mario A. Rojas; Mastantuono, Marco

    2013-01-01

    Aims: One of the reason for Latarjet procedure failure may be coracoid graft osteolysis. In this study, we aimed to understand if a better compression between the coracoid process and the glenoid, using a mini-plate fixation during the Latarjet procedure, could reduce the amount of coracoid graft osteolysis. Materials and Methods: A computed tomography scan analysis of 26 prospectively followed-up patients was conducted after modified Latarjet procedure using mini-plate fixation technique to determine both the location and the amount of coracoid graft osteolysis in them. We then compared our current results with results from that of our previous study without using mini-plate fixation to determine if there is any statistical significant difference in terms of corcacoid bone graft osteolysis between the two surgical techniques. Results: The most relevant osteolysis was represented by the superficial part of the proximal coracoid, whereas the deep part of the proximal coracoid graft is least involved in osteolysis and has best bone healing. The current study showed a significant difference only for the deep part of the distal coracoid with our previous study (P Latarjet procedure. Conclusion: Our study suggests that there is a significant difference only for the deep part of the distal coracoid in terms of osteolysis. At clinical examination, this difference did not correspond with any clinical findings. Level of Evidence: Level 4. Clinical Relevance: Prospective case series, Treatment study. PMID:23858288

  10. Enhancing Title Ix Due Process Standards in Campus Sexual Assault Adjudication: Considering the Roles of Distributive, Procedural, and Restorative Justice

    Science.gov (United States)

    Harper, Shannon; Maskaly, Jon; Kirkner, Anne; Lorenz, Katherine

    2017-01-01

    Title IX prohibits sex discrimination--including sexual assault--in higher education. The Department of Education Office for Civil Rights' 2011 "Dear Colleague Letter" outlines recommendations for campus sexual assault adjudication allowing a variety of procedures that fail to protect accused students' due process rights and victims'…

  11. 40 CFR 1045.515 - What are the test procedures related to not-to-exceed standards?

    Science.gov (United States)

    2010-07-01

    ... emissions with one of the following procedures: (1) Remove the selected engines for testing in a laboratory....075 (5) For two-stroke engines not equipped with a catalyst, the NTE zone described in paragraph (c)(3... cycle: (i) Mode 1: Operate the engine at wide open throttle. For laboratory testing, this may involve...

  12. Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

    Science.gov (United States)

    EPA adopted emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

  13. Technical Note: Anatomic identification of isolated modern human molars: testing Procrustes aligned outlines as a standardization procedure for elliptic fourier analysis.

    Science.gov (United States)

    Corny, Julien; Détroit, Florent

    2014-02-01

    The determination of the precise position of permanent first and second modern human molars, following standard tooth identification criteria, is often difficult because of their morphological similarities. Here, we proposed to evaluate the suitability of two-dimensional crown contour shape analysis in achieving this objective. The method was tested separately on 180 first and second maxillary molars (UM) and 180 first and second mandibular molars (LM) securely identified (in anatomical position in their sockets). Generalized Procrustes superimposition is used to normalize the outlines prior to applying elliptic Fourier analyses ("EFAproc" method). Reliability and effectiveness of this morphometric procedure was evaluated by comparing the results obtained for the same dataset with four other morphometric methods of contour analysis. Cross-validated ("leave one individual out") percentages of misclassification yielded by linear discriminant analyses were used for determining the anatomic position of modern human molars. The percentages of misclassifications obtained from every method of contour analysis were low (1.67% to 3.33% for the UM, 5.56% to 6.67% for the LM) indicating the high suitability of crown contour analyses in correctly identifying molars. A reliable protocol, based on predictive linear discriminant analyses, was then proposed for identification of isolated molars. In addition, our results confirmed that the EFAproc method is suitable for normalizing outlines prior to undertaking elliptic Fourier analyses, especially in the case of nearly circular outlines: it obtained better classification than the classic method of normalization of Fourier descriptors for UM and provided also some advantages over the three landmarks-based methods tested here. Copyright © 2013 Wiley Periodicals, Inc.

  14. Patient Recall of Informed Consent at 4 Weeks After Total Hip Replacement With Standardized Versus Procedure-Specific Consent Forms.

    Science.gov (United States)

    Pomeroy, Eoghan; Shaarani, Shahril; Kenyon, Robert; Cashman, James

    2017-08-25

    Informed consent plays a pivotal role in the operative process, and surgeons have an ethical and legal obligation to provide patients with information to allow for shared decision-making. Unfortunately, patient recall after the consent process is frequently poor. This study aims to evaluate the effect of procedure-specific consent forms on patient's recall four weeks after total hip replacement (THR). This is a prospective study using a posttest-only control group design. Sixty adult patients undergoing total hip replacement were allocated to be consented using either the generic or the surgery-specific consent form. Four weeks after surgery, a phone interview was conducted to assess patient's recall of risk of surgical complications. Patient demographic characteristics and educational attainment were similar in both groups. There was a statistically significant increase in the mean number of risks recalled in the study group at 1.43 compared with 0.67 in the control group (P = 0.0131). Consent is a complex process, and obtaining informed consent is far from straightforward. A statistically significant improvement in patient's recall with the use of procedure-specific consent forms was identified, and based on this, we would advocate their use. However, overall patient recall in both groups was poor. We believe that improving the quality of informed consent may require the sum of small gains, and the use of procedure-specific consent forms may aid in this regard.

  15. A proposal of Brazilian Society of Surgical Oncology for standardizing cytoreductive surgery plus hypertermic intraperitoneal chemotherapy procedures in Brazil: pseudomixoma peritonei, appendiceal tumors and malignant peritoneal mesothelioma

    Directory of Open Access Journals (Sweden)

    Thales Paulo Batista

    Full Text Available ABSTRACT Cytoreductive surgery plus hypertermic intraperitoneal chemotherapy has emerged as a major comprehensive treatment of peritoneal malignancies and is currently the standard of care for appendiceal epithelial neoplasms and pseudomyxoma peritonei syndrome as well as malignant peritoneal mesothelioma. Unfortunately, there are some worldwide variations of the cytoreductive surgery and hypertermic intraperitoneal chemotherapy techniques since no single technique has so far demonstrated its superiority over the others. Therefore, standardization of practices might enhance better comparisons between outcomes. In these settings, the Brazilian Society of Surgical Oncology considered it important to present a proposal for standardizing cytoreductive surgery plus hypertermic intraperitoneal chemotherapy procedures in Brazil, with a special focus on producing homogeneous data for the developing Brazilian register for peritoneal surface malignancies.

  16. A Randomized Controlled Trial to Compare e-Feedback Versus "Standard" Face-to-Face Verbal Feedback to Improve the Acquisition of Procedural Skill.

    Science.gov (United States)

    Al-Jundi, Wissam; Elsharif, Mohamed; Anderson, Melanie; Chan, Phillip; Beard, Jonathan; Nawaz, Shah

    Constructive feedback plays an important role in learning during surgical training. Standard feedback is usually given verbally following direct observation of the procedure by a trained assessor. However, such feedback requires the physical presence of expert faculty members who are usually busy and time-constrained by clinical commitments. We aim to evaluate electronic feedback (e-feedback) after video observation of surgical suturing in comparison with standard face-to-face verbal feedback. A prospective, blinded, randomized controlled trial comparing e-feedback with standard verbal feedback was carried out in February 2015 using a validated pro formas for assessment. The study participants were 38 undergraduate medical students from the University of Sheffield, UK. They were recorded on video performing the procedural skill, completed a self-evaluation form, and received e-feedback on the same day (group 1); observed directly by an assessor, invited to provide verbal self-reflection, and then received standard verbal feedback (group 2). In both groups, the feedback was provided after performing the procedure. The participants returned 2 days later and performed the same skill again. Poststudy questionnaire was used to assess the acceptability of each feedback among the participants. Overall, 19 students in group 1 and 18 students in group 2 completed the study. Although there was a significant improvement in the overall mean score on the second performance of the task for all participants (first performance mean 11.59, second performance mean 15.95; p ≤ 0.0001), there was no difference in the overall mean improvement score between group 1 and group 2 (4.74 and 3.94, respectively; p = 0.49). The mean overall scores for the e-feedback group at baseline recorded by 2 independent investigators showed good agreement (mean overall scores of 12.84 and 11.89; Cronbach α = 0.86). Poststudy questionnaire demonstrated that both e-feedback and standard verbal feedback

  17. 77 FR 36341 - Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

    Science.gov (United States)

    2012-06-18

    ... normally expressed as shaft horsepower (hp) or shaft kilowatt (kW). \\5\\ This includes turbofan and turbojet... Organization (ICAO). The requirements contained in this final rule bring the United States into alignment with... brought the U.S. standards closer to alignment with ICAO CAEP/4 requirements that were effective in 2004...

  18. 20 CFR 627.604 - Alternative procedure for handling labor standards violations under section 143 of the Act...

    Science.gov (United States)

    2010-04-01

    ... standards violations under section 143 of the Act-binding arbitration. 627.604 Section 627.604 Employees... UNDER TITLES I, II, AND III OF THE ACT Federal Handling of Noncriminal Complaints and Other Allegations...—binding arbitration. (a) A person alleging a violation of section 143 of the Act, as an alternative to...

  19. Standard Procedure for Dose Assessment using the film holder NRPB/AERE and the film AGFA Monitoring 2/10

    International Nuclear Information System (INIS)

    Guillen, J.A.

    1998-07-01

    This paper describes the calculation method to assess dose and energy using the film holder from NRPB/AERE and the film Agfa Monitoring 2/10. Also includes all the steps since preparing the standard curve, fitting of calibration curve, dose assesment, description of filtration of the film holder and the form of the calibration curve

  20. Conscious sedation for endoscopic and non-endoscopic interventional gastrointestinal procedures: meeting patients' expectations, missing the standard

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, P.; Laasch, H.-U.; Wilbraham, L.; Marriott, A.; England, R.E.; Martin, D.F. E-mail: derrick.martin@smtr.nhs.uk

    2004-02-01

    AIM: To assess the level of sedation, patient satisfaction and frequency of unplanned events with conscious sedation for interventional procedures. MATERIALS AND METHODS: One hundred and seventeen patients were assessed prospectively before, during and after procedures. Blood pressure, pulse, oxygen saturation and sedation level were monitored and patients followed up after 24 h. Sedation was scored after drugs were given in accordance with an established protocol. Doses were recorded, as were patients' weight, age and ASA grade and any unplanned events and their management. RESULTS: Seventy-six of the 117 patients (65%) had no unplanned event, 20 (17.1%) became agitated, 15 (12.8%) hypotensive, three (2.6%) hypoxic and three (2.6%) had more than one response. Twelve patients required active management. Fifty-two (44.4%) had a sedation level of {<=}3 (responsive to verbal commands), but 39 (33.3%) reached level 6. Median doses were midazolam 6 mg (1-20 mg) and pethidine 50 mg (12.5-100 mg). Ninety-three percent were satisfied with their sedation. No adverse effects were observed after 24 h. CONCLUSION: Despite using a sedation protocol, unplanned events occurred in 35% (95% CI=27-44%) of patients, although not all required active management. The sedation levels reached in some exceeded guidelines. Unplanned events were commoner with increased sedation level. Patient satisfaction was high and no permanent damage was observed.

  1. Conscious sedation for endoscopic and non-endoscopic interventional gastrointestinal procedures: meeting patients' expectations, missing the standard

    International Nuclear Information System (INIS)

    Marriott, P.; Laasch, H.-U.; Wilbraham, L.; Marriott, A.; England, R.E.; Martin, D.F.

    2004-01-01

    AIM: To assess the level of sedation, patient satisfaction and frequency of unplanned events with conscious sedation for interventional procedures. MATERIALS AND METHODS: One hundred and seventeen patients were assessed prospectively before, during and after procedures. Blood pressure, pulse, oxygen saturation and sedation level were monitored and patients followed up after 24 h. Sedation was scored after drugs were given in accordance with an established protocol. Doses were recorded, as were patients' weight, age and ASA grade and any unplanned events and their management. RESULTS: Seventy-six of the 117 patients (65%) had no unplanned event, 20 (17.1%) became agitated, 15 (12.8%) hypotensive, three (2.6%) hypoxic and three (2.6%) had more than one response. Twelve patients required active management. Fifty-two (44.4%) had a sedation level of ≤3 (responsive to verbal commands), but 39 (33.3%) reached level 6. Median doses were midazolam 6 mg (1-20 mg) and pethidine 50 mg (12.5-100 mg). Ninety-three percent were satisfied with their sedation. No adverse effects were observed after 24 h. CONCLUSION: Despite using a sedation protocol, unplanned events occurred in 35% (95% CI=27-44%) of patients, although not all required active management. The sedation levels reached in some exceeded guidelines. Unplanned events were commoner with increased sedation level. Patient satisfaction was high and no permanent damage was observed

  2. Standard procedure for testing acute toxic effects on bioluminescent bacteria; Saggio di tossicita` acuta con batteri bioluminescenti

    Energy Technology Data Exchange (ETDEWEB)

    Guzzella, L. [CNR, Brugherio, Milan (Italy). Istituto di Ricerca Sulle Acque

    1996-06-01

    A standardized method for the determination of 15-30 min toxicity of `Vibrio fisheri` bioluminescent bacteria is evaluated. The proposed method can be applied for the analysis of liquid (superficial and drinking waters, eluates and wastes) and solid (sediments and muds) samples and permits the quantification of the EC50 and EC20 values and of the no-effective sample dilution. The results of a interlaboratory ring tests conducted with reference substances are illustrated.

  3. MATLAB-implemented estimation procedure for model-based assessment of hepatic insulin degradation from standard intravenous glucose tolerance test data.

    Science.gov (United States)

    Di Nardo, Francesco; Mengoni, Michele; Morettini, Micaela

    2013-05-01

    Present study provides a novel MATLAB-based parameter estimation procedure for individual assessment of hepatic insulin degradation (HID) process from standard frequently-sampled intravenous glucose tolerance test (FSIGTT) data. Direct access to the source code, offered by MATLAB, enabled us to design an optimization procedure based on the alternating use of Gauss-Newton's and Levenberg-Marquardt's algorithms, which assures the full convergence of the process and the containment of computational time. Reliability was tested by direct comparison with the application, in eighteen non-diabetic subjects, of well-known kinetic analysis software package SAAM II, and by application on different data. Agreement between MATLAB and SAAM II was warranted by intraclass correlation coefficients ≥0.73; no significant differences between corresponding mean parameter estimates and prediction of HID rate; and consistent residual analysis. Moreover, MATLAB optimization procedure resulted in a significant 51% reduction of CV% for the worst-estimated parameter by SAAM II and in maintaining all model-parameter CV% MATLAB-based procedure was suggested as a suitable tool for the individual assessment of HID process. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  4. PLAN-TA9-2443(U), Rev. B Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-16

    This document identifies scope and some general procedural steps for performing Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing. This Test Plan describes the requirements, responsibilities, and process for preparing and testing a range of chemical surrogates intended to mimic the energetic response of waste created during processing of legacy nitrate salts. The surrogates developed are expected to bound1 the thermal and mechanical sensitivity of such waste, allowing for the development of process parameters required to minimize the risk to worker and public when processing this waste. Such parameters will be based on the worst-case kinetic parameters as derived from APTAC measurements as well as the development of controls to mitigate sensitivities that may exist due to friction, impact, and spark. This Test Plan will define the scope and technical approach for activities that implement Quality Assurance requirements relevant to formulation and testing.

  5. The ageing and myasthenic thymus: a morphometric study validating a standard procedure in the histological workup of thymic specimens.

    Science.gov (United States)

    Ströbel, Philipp; Moritz, Regina; Leite, Maria Isabel; Willcox, Nick; Chuang, Wen-Yu; Gold, Ralf; Nix, Wilfred; Schalke, Berthold; Kiefer, Reinhard; Müller-Hermelink, Hans-Konrad; Jaretzki Iii, Alfred; Newsom-Davis, John; Marx, Alexander

    2008-09-15

    The thymus is believed to play an important role in the pathogenesis of myasthenia gravis (MG). The 80% of MG patients with anti-acetylcholine receptor autoantibodies fall into three clinical subgroups: 1) thymoma; 2) early-onset MG (standardized histological workup and reporting system used in this trial.

  6. Randomized trial of one-hour sodium bicarbonate vs standard periprocedural saline hydration in chronic kidney disease patients undergoing cardiovascular contrast procedures.

    Science.gov (United States)

    Kooiman, Judith; de Vries, Jean-Paul P M; Van der Heyden, Jan; Sijpkens, Yvo W J; van Dijkman, Paul R M; Wever, Jan J; van Overhagen, Hans; Vahl, Antonie C; Aarts, Nico; Verberk-Jonkers, Iris J A M; Brulez, Harald F H; Hamming, Jaap F; van der Molen, Aart J; Cannegieter, Suzanne C; Putter, Hein; van den Hout, Wilbert B; Kilicsoy, Inci; Rabelink, Ton J; Huisman, Menno V

    2018-01-01

    Guidelines advise periprocedural saline hydration for prevention of contrast induced-acute kidney injury (CI-AKI). We analysed whether 1-hour sodium bicarbonate hydration administered solely prior to intra-arterial contrast exposure is non-inferior to standard periprocedural saline hydration in chronic kidney disease (CKD) patients undergoing elective cardiovascular diagnostic or interventional contrast procedures. We performed an open-label multicentre non-inferiority trial between 2011-2014. Patients were randomized to 1 hour pre-procedure sodium bicarbonate hydration (250 ml 1.4%, N = 168) or 4-12 hours saline hydration (1000 ml 0.9%, N = 165) prior to and following contrast administration (2000 ml of saline total). Primary outcome was the relative serum creatinine increase (%) 48-96 hours post contrast exposure. Secondary outcomes were: incidence of CI-AKI (serum creatinine increase>25% or >44μmol/L), recovery of renal function, the need for dialysis, and hospital costs within two months follow-up. Mean relative creatinine increase was 3.1% (95%CI 0.9 to 5.2%) in the bicarbonate and 1.1% (95%CI -1.2 to 3.5%) in the saline arm, mean difference 1.9% (95%CI -1.2 to 5.1%, p-non-inferiority sodium bicarbonate and 12 (7.5%) to saline (p = 0.79). Renal function did not fully recover in 40.0% and 44.4% of CI-AKI patients, respectively (p = 0.84). No patient required dialysis. Mean costs for preventive hydration and clinical preparation for the contrast procedure were $1158 for sodium bicarbonate vs. $1561 for saline (p sodium bicarbonate prior to elective cardiovascular diagnostic or therapeutic contrast procedures is non-inferior to standard periprocedural saline hydration in CKD patients with respect to renal safety and results in considerable healthcare savings. Netherlands Trial Register (http://www.trialregister.nl/trialreg/index.asp), Nr NTR2699.

  7. Addition of interferon-alpha to a standard maturation cocktail induces CD38 up-regulation and increases dendritic cell function

    DEFF Research Database (Denmark)

    Trepiakas, Redas; Pedersen, Anders Elm; Met, Ozcan

    2009-01-01

    and PGE(2) used for generating standard DCs (sDC). Several studies indicate that IFN-alpha might also be important for DC differentiation and maturation. In this study, we tested the effect of IFN-alpha alone or as addition to the gold standard sDC cocktail. We observed that maturation by IFN-alpha......Monocyte-derived dendritic cells (DCs) are used as adjuvant cells in cancer immunotherapy and have shown promising results. In order to obtain full functional capacity, these DCs need to be maturated, and the current "gold standard" for this process is maturation with TNF-alpha, IL-1beta, IL-6...... differs from sDC maturation: The major phenotypic change after IFN-alpha maturation was dose-dependent up-regulation of CD38 but not CD83, while sDCs expressed the opposite profile with low CD38 and high CD83 expression. Similarly, maturation by Poly I:C leads to CD38high, CD83low DCs indicating...

  8. Spectrophotometric methods for the determination of urea in real samples using silver nanoparticles by standard addition and 2nd order derivative methods.

    Science.gov (United States)

    Ali, Nauman; Ismail, Muhammad; Khan, Adnan; Khan, Hamayun; Haider, Sajjad; Kamal, Tahseen

    2018-01-15

    In this work, we have developed simple, sensitive and inexpensive methods for the spectrophotometric determination of urea in urine samples using silver nanoparticles (AgNPs). The standard addition and 2nd order derivative methods were adopted for this purpose. AgNPs were prepared by chemical reduction of AgNO 3 with hydrazine using 1,3-di-(1H-imidazol-1-yl)-2-propanol (DIPO) as a stabilizing agent in aqueous medium. The proposed methods were based on the complexation of AgNPs with urea. Using this concept, urea in the urine samples was successfully determined spectrophotometric methods. The results showed high percent recovery with ±RSD. The recoveries of urea in the three urine samples by spectrophotometric standard addition were 99.2%±5.37, 96.3%±4.49, 104.88%±4.99 and that of spectrophotometric 2nd order derivative method were 115.3%±5.2, 103.4%±2.6, 105.93%±0.76. The results show that these methods can open doors for a potential role of AgNPs in the clinical determination of urea in urine, blood, biological, non-biological fluids. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Spectrophotometric methods for the determination of urea in real samples using silver nanoparticles by standard addition and 2nd order derivative methods

    Science.gov (United States)

    Ali, Nauman; Ismail, Muhammad; Khan, Adnan; Khan, Hamayun; Haider, Sajjad; Kamal, Tahseen

    2018-01-01

    In this work, we have developed simple, sensitive and inexpensive methods for the spectrophotometric determination of urea in urine samples using silver nanoparticles (AgNPs). The standard addition and 2nd order derivative methods were adopted for this purpose. AgNPs were prepared by chemical reduction of AgNO3 with hydrazine using 1,3-di-(1H-imidazol-1-yl)-2-propanol (DIPO) as a stabilizing agent in aqueous medium. The proposed methods were based on the complexation of AgNPs with urea. Using this concept, urea in the urine samples was successfully determined spectrophotometric methods. The results showed high percent recovery with ± RSD. The recoveries of urea in the three urine samples by spectrophotometric standard addition were 99.2% ± 5.37, 96.3% ± 4.49, 104.88% ± 4.99 and that of spectrophotometric 2nd order derivative method were 115.3% ± 5.2, 103.4% ± 2.6, 105.93% ± 0.76. The results show that these methods can open doors for a potential role of AgNPs in the clinical determination of urea in urine, blood, biological, non-biological fluids.

  10. Standardization of a Protocol for Obtaining Platelet Rich Plasma from blood Donors; a Tool for Tissue Regeneration Procedures.

    Science.gov (United States)

    Gómez, Lina Andrea; Escobar, Magally; Peñuela, Oscar

    2015-01-01

    To develop a protocol for obtaining autologous platelet rich plasma in healthy individuals and to determine the concentration of five major growth factors before platelet activation. This protocol could be integrated into the guidelines of good clinical practice and research in regenerative medicine. Platelet rich plasma was isolated by centrifugation from 38 healthy men and 42 women ranging from 18 to 59 years old. The platelet count and quantification of growth factors were analyzed in eighty samples, stratified for age and gender of the donor. Analyses were performed using parametric the t-test or Pearson's analysis for non-parametric distribution. P platelet counts from 1.6 to 4.9 times (mean = 2.8). There was no correlation between platelet concentration and the level of the following growth factors: VEGF-D (r = 0.009, p = 0.4105), VEGF-A (r = 0.0068, p = 0.953), PDGF subunit AA (p = 0.3618; r = 0.1047), PDGF-BB (p = 0.5936; r = 0.6095). In the same way, there was no correlation between donor gender and growth factor concentrations. Only TGF-β concentration was correlated to platelet concentration (r = 0.3163, p = 0.0175). The procedure used allowed us to make preparations rich in platelets, low in leukocytes and red blood cells, and sterile. Our results showed biological variations in content of growth factors in PRP. The factors influencing these results should be further studied.

  11. Evaluation and assessment methodology, standards, and procedures manual of the United States Federal Radiological Monitoring and Assessment Center

    International Nuclear Information System (INIS)

    Kerns, K.C.; Burson, Z.G.; Smith, J.M.; Blanchard, R.L.

    2000-01-01

    In the event of a major radiological emergency, the U.S. Federal Radiological Emergency Response Plan authorises the creation of the Federal Radiological Monitoring and Assessment Center (FRMAC). The FRMAC is established to co-ordinate the Federal off-site monitoring and assessment activities, and is comprised of representatives from several Federal agencies and Department of Energy contractors who provide assistance to the state(s) and Lead Federal Agency. The Evaluation and Assessment (E and A) Division of the FRMAC is responsible for receiving, storing, and interpreting environmental surveillance data to estimate the potential health consequences to the population in the vicinity of the accident site. The E and A Division has commissioned the preparation of a methodology and procedures manual which will result in a consistent approach by Division members in carrying out their duties. The first edition of this manual is nearing completion. In this paper, a brief review of the structure of the FRMAC is presented, with emphasis on the E and A Division. The contents of the E and A manual are briefly described, as are future plans for its expansion. (author)

  12. International Cooperation to Establish Standard Operating Procedure (SOP) for Quarantine Management of Irradiated Foods in International Trade

    International Nuclear Information System (INIS)

    Lee, J. W.; Byun, M. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Yoon, Y. H.; Kim, D. H.; Kim, W. G.; Kim, K. P.

    2010-02-01

    · Development of SOPs through various research activities such as building international cooperation, and analysing current status of food irradiation in domestic and international markets, export and import, international market size, and of R and D - Analysis of examples for quarantine management in agricultural product exporting countries and use of irradiation technology for agricultural product quarantine, and changes in international quarantine management - Analysis of SOPs for food irradiation quarantine in international organization (CODEX, IPPC, WHO). U.S, EU, China, India, and Australia. - Collaborative researches of India/Korea and China/Korea entered into an agreement for market trials · Publishment of irradiation quarantine management SOPs agreed to CODEX standards - Collaborative researches for quarantine management, avoiding Technical Barrier to Trade (TBT), and Sanitary Phytosanitary Measures were conducted, and advanced SOPs agreed with WTO/FTA system were published

  13. Mutagenic treatments towards increasing the frequency of day-neutral mutations and standardization of procedures for tissue culture, in potato

    International Nuclear Information System (INIS)

    Upadhya, M.D.; Chandra, R.; Abraham, M.J.

    1976-01-01

    Various chemical mutagens and gamma radiation have been used on single dormant eyes and true seeds with a view to finding effective mutagenic treatment for the induction of day-length neutral mutants in potato using an effective screening technique for the isolation of day-length neutral mutants. Sodium meta bisulphite (SMS) was found to be an efficient mutagen in inducing mutations for this trait in true seeds although the same concentrations, when used for treating the single tuber eyes proved lethal. Pre-soaking the seeds for 24 hrs prior to treatment with 0.0025M SMS gave highest frequency of the mutants followed by 48 hrs presoaking, indicating a sensitive stage during the cell cycle in true seeds. Other mutagen treatments gave different frequencies of mutations. The highest frequency of day-length neutral mutants was observed when seeds irradiated with 40 Kr of gamma radiation were treated with 0.05M hydrazinium dichloride solution. Screening procedures have also been standardised with the development of synethetic media for the isolation of biochemical mutants at the true seed level. Initial efforts have yielded mutants resistant to LD 100 doses of ethionine. Another aspect of the study was to develop a proper potato callus culture technique. A medium has been developed to produce and maintain callus from potato leaf strips. Efforts on the regeneration of shoot and roots from callus, have so far lead to differentiation of callus to form roots. The ultimate aim of these studies is to develop plantlets from single cell which would form the units of mutation induction and isolation. (author)

  14. Powered bone marrow biopsy procedures produce larger core specimens, with less pain, in less time than with standard manual devices

    Directory of Open Access Journals (Sweden)

    Larry J. Miller

    2011-07-01

    Full Text Available Bone marrow sampling remains essential in the evaluation of hematopoietic and many non-hematopoietic disorders. One common limitation to these procedures is the discomfort experienced by patients. To address whether a Powered biopsy system could reduce discomfort while providing equivalent or better results, we performed a randomized trial in adult volunteers. Twenty-six subjects underwent bilateral biopsies with each device. Core samples were obtained in 66.7% of Manual insertions; 100% of Powered insertions (P=0.002. Initial mean biopsy core lengths were 11.1±4.5 mm for the Manual device; 17.0±6.8 mm for the Powered device (P<0.005. Pathology assessment for the Manual device showed a mean length of 6.1±5.6 mm, width of 1.0±0.7 mm, and volume of 11.0±10.8 mm3. Powered device measurements were mean length of 15.3±6.1 mm, width of 2.0±0.3 mm, and volume of 49.1±21.5 mm3 (P<0.001. The mean time to core ejection was 86 seconds for Manual device; 47 seconds for the Powered device (P<0.001. The mean second look overall pain score was 33.3 for the Manual device; 20.9 for the Powered (P=0.039. We conclude that the Powered biopsy device produces superior sized specimens, with less overall pain, in less time.

  15. Philosophy, policy and procedures of the World Organisation for Animal Health for the development of standards in animal welfare.

    Science.gov (United States)

    Petrini, A; Wilson, D

    2005-08-01

    Animal welfare was identified as a priority for the World Organisation for Animal Health (OIE) in the 2001-2005 OIE Strategic Plan. Member Countries recognised that, as animal protection is a complex, multi-faceted public policy issue which includes important scientific, ethical, economic and political dimensions, the OIE needed to develop a detailed vision and strategy incorporating and balancing these dimensions. A permanent working group on animal welfare was established in order to provide guidance to the OIE in its work on the development of science-based standards and guidelines. The Working Group decided to give priority to the welfare of animals used in agriculture and aquaculture, and that, within those groups, the topics of transportation, slaughter for human consumption and killing for disease control purposes would be addressed first. Some guiding principles were approved by the International Committee of OIE Member Countries during the 72nd General Session in May 2004, and these have been followed by four specific guidelines on the priority topics listed above.

  16. Preparation procedure and certification of uranous-uranic oxide and nitric acid solution of neptunium as standard specimens of plant

    International Nuclear Information System (INIS)

    Bulyanitsa, L.S.; Lipovskij, A.A.; Ryzhinskij, M.V.; Preobrazhensskaya, L.D.; Aleksandruk, V.M.; Alekseeva, N.A.; Gromova, E.A.; Solntseva, L.F.; Shereshevskaya, I.I.

    1981-01-01

    Two techniques of certification of standard specimens of plant (SSP) are considered. The first technique-comparison with initial SS-metallic uranium NBS-960 - is used for certification of uranium. protoxide-oxide. The mass part of the sum of analyzed impurities in prepared initial SS is (8.4+-0.8)x10 -3 %. For certification according to mass uranium part the method of gravimetric potentiometric titration with semiautomatic titrator is used; the mean quadratic deviation of the method is s=0.0002-0.0003, certified value of uranium mass part in SSP (taking account of the error of initial SS) is (84.80+-0.02)%. The second technigue - a simplified circular experiment - is used for certification of SSP-nitric acid solution of neptunium as to Np mass part. Coulometry at controlled potential and coulometry at controlled current and two variants of potentiometric titration are used as certification methods of analysis. Relative mean quadratic deviations of the methods are ssub(r)=0.0014-0.0023. When calculating total error of certified value of neptunium mass part constituents of both accidental and unremoved systematic errors of the methods were included. The final certification result of SSP is (5.707+-0.018)% [ru

  17. Chapter 1. Introduction. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster.

    Science.gov (United States)

    Sprung, Charles L; Cohen, Robert; Adini, Bruria

    2010-04-01

    In December 2007, the European Society of Intensive Care Medicine established a Task Force to develop standard operating procedures (SOPs) for operating intensive care units (ICU) during an influenza epidemic or mass disaster. To provide direction for health care professionals in the preparation and management of emergency ICU situations during an influenza epidemic or mass disaster, standardize activities, and promote coordination and communication among the medical teams. Based on a literature review and contributions of content experts, a list of essential categories for managing emergency situations in the ICU were identified. Based on three cycles of a modified Delphi process, consensus was achieved regarding the categories. A primary author along with an expert group drafted SOPs for each category. Based on the Delphi cycles, the following key topics were found to be important for emergency preparedness: triage, infrastructure, essential equipment, manpower, protection of staff and patients, medical procedures, hospital policy, coordination and collaboration with interface units, registration and reporting, administrative policies and education. The draft SOPs serve as benchmarks for emergency preparedness and response of ICUs to emergencies or outbreak of pandemics.

  18. Changes in the biochemical oxygen demand procedure in the 21st edition of Standard Methods for the Examination of Water and Wastewater.

    Science.gov (United States)

    Young, James C; Clesceri, Lenore S; Kamhawy, Sabry M

    2005-01-01

    The dilution biochemical oxygen demand (BOD) test has widespread application for design and operation of wastewater treatment processes, evaluating the quality of natural waters, and assessing the effect of wastewater discharges on these waters. While standardization of the BOD-measuring method has become of prime importance in maintaining dependable data acquisition, changes are made as needed in response to questions raised by analysts and to accommodate new applications. The purpose of this article is to describe changes that have been incorporated in the 20th and 21st editions of Standard Methods for the Examination of Water and Wastewater (APHA et al., 1998 and 2004). These changes include changes in text format to clarify the procedural steps, allowance for use of bottle sizes ranging from 60 mL or larger, improvements in quality-control procedures, and improvements in the method of calculating BOD. Other changes include allowance for the use of allylthiourea for nitrification inhibition and broadening the source of seed that can be used for inoculation of BOD samples.

  19. [Advantages and disadvantages of different methods for the implementation and the support of standard operating procedures: From PDF files to an app- and webbased SOP management system].

    Science.gov (United States)

    Bauer, M; Riech, S; Brandes, I; Waeschle, R M

    2015-11-01

    The quality assurance of care and patient safety, with increasing cost pressure and performance levels is of major importance in the high-risk and high cost area of the operating room (OR). Standard operating procedures (SOP) are an established tool for structuring and standardization of the clinical treatment pathways and show multiple benefits for quality assurance and process optimization. An internal project was initiated in the department of anesthesiology and a continuous improvement process was carried out to build up a comprehensive SOP library. In the first step the spectrum of procedures in anesthesiology was transferred to PDF-based SOPs. The further development to an app-based SOP library (Aesculapp) was due to the high resource expenditure for the administration and maintenance of the large PDF-based SOP collection and to deficits in the mobile availability. The next developmental stage, the SOP healthcare information assistant (SOPHIA) included a simplified and advanced update feature, an archive feature previously missing and notably the possibility to share the SOP library with other departments including the option to adapt each SOP to the individual situation. A survey of the personnel showed that the app-based allocation of SOPs (Aesculapp, SOPHIA) had a higher acceptance than the PDF-based developmental stage SOP form. The SOP management system SOPHIA combines the benefits of the forerunner version Aesculapp with improved options for intradepartmental maintenance and administration of the SOPs and the possibility of an export and editing function for interinstitutional exchange of SOPs.

  20. Temperature, pressure, and electrochemical constraints on protein speciation: Group additivity calculation of the standard molal thermodynamic properties of ionized unfolded proteins

    Directory of Open Access Journals (Sweden)

    J. M. Dick

    2006-01-01

    Full Text Available Thermodynamic calculations can be used to quantify environmental constraints on the speciation of proteins, such as the pH and temperature dependence of ionization state, and the relative chemical stabilities of proteins in different biogeochemical settings. These calculations depend in part on values of the standard molal Gibbs energies of proteins and their ionization reactions as a function of temperature and pressure. Because these values are not generally available, we calculated values of the standard molal thermodynamic properties at 25°C and 1 bar as well as the revised Helgeson-Kirkham-Flowers equations of state parameters of neutral and charged zwitterionic reference model compounds including aqueous amino acids, polypeptides, and unfolded proteins. The experimental calorimetric and volumetric data for these species taken from the literature were combined with group additivity algorithms to calculate the properties and parameters of neutral and ionized sidechain and backbone groups in unfolded proteins. The resulting set of group contributions enables the calculation of the standard molal Gibbs energy, enthalpy, entropy, isobaric heat capacity, volume, and isothermal compressibility of unfolded proteins in a range of proton ionization states to temperatures and pressures exceeding 100°C and 1000 bar. This approach provides a useful frame of reference for thermodynamic studies of protein folding and complexation reactions. It can also be used to assign provisional values of the net charge and Gibbs energy of ionized proteins as a function of temperature and pH. Using these values, an Eh-pH diagram for a reaction representing the speciation of extracellular proteins from Pyrococcus furiosus and Bacillus subtilis was generated. The predicted predominance limits of these proteins correspond with the different electrochemical conditions of hydrothermal vents and soils. More comprehensive calculations of this kind may reveal pervasive

  1. Determination of Iron (Fe and Calcium (Ca in NIST SRM 1566b (Oyster tissue using Flame Atomic Absorption Spectrometry (F-AAS by Standard Addition Method

    Directory of Open Access Journals (Sweden)

    Fitri Dara

    2017-03-01

    Full Text Available NIST Standard Reference Material (SRM 1566b was employed for the determination of Iron (Fe andCalcium (Ca as nutrients in food matrix using Flame Atomic Absorption Spectrometry (F-AAS. Thecertified value of SRM 1566b for Fe and Ca are 205.8 ± 6.8 mg/kg and 0.0838 ± 0.0020 (% or 838 ±20 mg/kg, respectively. This certified values are based on results obtained by single primary method(Isotope Dilution Inductively Couple Plasma Mass Spectrometry at NIST with confirmation by othermethods at National Metrology Institute of P.R. China. This paper proposed a method fordetermination of Fe and Ca in food matrix as recommended by AOAC official with a littlemodification. The method was commenced from the destruction of all organic matter by dry oxidationbefore analysis by standard addition. Under optimum condition, the results of the determination of Feand Ca in SRM 1566b were agreed well with the certificate value. This method would be useful forroutine analysis in food testing laboratories.

  2. Quantitative Analyses of Force-Induced Amyloid Formation in Candida albicans Als5p: Activation by Standard Laboratory Procedures.

    Directory of Open Access Journals (Sweden)

    Cho X J Chan

    Full Text Available Candida albicans adhesins have amyloid-forming sequences. In Als5p, these amyloid sequences cluster cell surface adhesins to create high avidity surface adhesion nanodomains. Such nanodomains form after force is applied to the cell surface by atomic force microscopy or laminar flow. Here we report centrifuging and resuspending S. cerevisiae cells expressing Als5p led to 1.7-fold increase in initial rate of adhesion to ligand coated beads. Furthermore, mechanical stress from vortex-mixing of Als5p cells or C. albicans cells also induced additional formation of amyloid nanodomains and consequent activation of adhesion. Vortex-mixing for 60 seconds increased the initial rate of adhesion 1.6-fold. The effects of vortex-mixing were replicated in heat-killed cells as well. Activation was accompanied by increases in thioflavin T cell surface fluorescence measured by flow cytometry or by confocal microscopy. There was no adhesion activation in cells expressing amyloid-impaired Als5pV326N or in cells incubated with inhibitory concentrations of anti-amyloid dyes. Together these results demonstrated the activation of cell surface amyloid nanodomains in yeast expressing Als adhesins, and further delineate the forces that can activate adhesion in vivo. Consequently there is quantitative support for the hypothesis that amyloid forming adhesins act as both force sensors and effectors.

  3. Efficacy of Web-Based Weight Loss Maintenance Programs: A Randomized Controlled Trial Comparing Standard Features Versus the Addition of Enhanced Personalized Feedback over 12 Months.

    Science.gov (United States)

    Collins, Clare E; Morgan, Philip J; Hutchesson, Melinda J; Oldmeadow, Christopher; Barker, Daniel; Callister, Robin

    2017-11-08

    Few randomized controlled trials (RCT) have evaluated the efficacy of web-based programs targeting maintenance of lost weight. The aims of this study were to evaluate two versions of a commercially available web-based weight loss maintenance (WLM) program and examine whether the provision of enhanced feedback was associated with better WLM. The study was an assessor-blinded RCT of change in body mass index (BMI) over 12 months WLM. Participants were 227 adults (44% male, 42.3 ± 10.1 years, BMI 30.4 ± 4.1 kg/m²) randomized to either a basic (Basic WLM) or enhanced program with additional support (Enhanced WLM). Analysis was intention-to-treat with imputation using last observation carried forward. There was no significant weight rebound from the start of weight loss maintenance to 12 months for either group (mean: basic 1.3%, enhanced 1.5%) and limited change in secondary outcomes for either program. There were no significant between-group differences in the primary outcome of change in BMI (basic -0.5 (1.9) kg/m², enhanced -0.5 (1.6) kg/m², p = 0.93). In conclusion, a web-based WLM program was effective in preventing weight regain over one year following weight loss. However, the addition of personalized e-feedback provided limited additional benefits compared to a standard program. Given the potential reach of web-based approaches, further research examining which web-based program components optimize weight outcomes long-term is required.

  4. Efficacy of Web-Based Weight Loss Maintenance Programs: A Randomized Controlled Trial Comparing Standard Features Versus the Addition of Enhanced Personalized Feedback over 12 Months

    Directory of Open Access Journals (Sweden)

    Clare E. Collins

    2017-11-01

    Full Text Available Few randomized controlled trials (RCT have evaluated the efficacy of web-based programs targeting maintenance of lost weight. The aims of this study were to evaluate two versions of a commercially available web-based weight loss maintenance (WLM program and examine whether the provision of enhanced feedback was associated with better WLM. The study was an assessor-blinded RCT of change in body mass index (BMI over 12 months WLM. Participants were 227 adults (44% male, 42.3 ± 10.1 years, BMI 30.4 ± 4.1 kg/m2 randomized to either a basic (Basic WLM or enhanced program with additional support (Enhanced WLM. Analysis was intention-to-treat with imputation using last observation carried forward. There was no significant weight rebound from the start of weight loss maintenance to 12 months for either group (mean: basic 1.3%, enhanced 1.5% and limited change in secondary outcomes for either program. There were no significant between-group differences in the primary outcome of change in BMI (basic −0.5 (1.9 kg/m2, enhanced −0.5 (1.6 kg/m2, p = 0.93. In conclusion, a web-based WLM program was effective in preventing weight regain over one year following weight loss. However, the addition of personalized e-feedback provided limited additional benefits compared to a standard program. Given the potential reach of web-based approaches, further research examining which web-based program components optimize weight outcomes long-term is required.

  5. Quantifying the Additional Difficulty of Pediatric Robot-Assisted Laparoscopic Re-Do Pyeloplasty: A Comparison of Primary and Re-Do Procedures.

    Science.gov (United States)

    Baek, Minki; Silay, Mesrur Selcuk; Au, Jason K; Huang, Gene O; Elizondo, Rodolfo A; Puttmann, Kathleen; Janzen, Nicolette K; Seth, Abhishek; Roth, David R; Koh, Chester J

    2018-02-06

    Re-do pyeloplasty after failed open or laparoscopic ureteropelvic junction (UPJ) obstruction correction can be a challenging procedure because of scar formation at the previous anastomosis site and decreased vascularity of the ureter. This study compared the perioperative parameters for pediatric robot-assisted laparoscopic (RAL) primary and re-do pyeloplasties with an emphasis on the intra-operative parameters. We compared the perioperative parameters of pediatric RAL procedures performed by a single surgeon at a tertiary care children's hospital for both primary ureteropelvic junction obstruction (UPJO) and recurrent UPJO after a previous open or laparoscopic procedure over 2013-2015. The operative time was subdivided as total operative time, console time, port placement time, dissection time to UPJ, and anastomosis time. A total of 65 pediatric RAL pyeloplasty procedures for UPJO were performed (55 primary and 10 re-do pyeloplasties) during the study period. The console times were 43.3% longer for re-do pyeloplasties than for primary pyeloplasties (133.0 ± 30.7 versus 92.8 ± 24.0 minutes, respectively, P < .01). The re-do cases had longer operative times, especially for UPJ exposure (52.2 ± 21.0 versus 28.0 ± 14.0 minutes, P < .01). There were no conversions to open surgery or significant perioperative complications. There was no difference in hospital pain medication usage and hospital length of stay between the 2 groups. The treatment success rates were 98.2% (54/55) and 100% (10/10), respectively. RAL re-do pyeloplasty is associated with significantly longer operative times as compared with primary pyeloplasties, especially during the exposure of the UPJ, but it is overall a safe and effective surgical modality for persistent/recurrent UPJO in children. As surgeons are increasingly asked for more accurate predictions of operative time lengths when scheduling cases, this information can be helpful for surgeons when scheduling these

  6. Determination of additivity of apparent and standardized ileal digestibility of amino acids in diets containing multiple protein sources fed to growing pigs.

    Science.gov (United States)

    Xue, P C; Ragland, D; Adeola, O

    2014-09-01

    An experiment was conducted in growing pigs to investigate the additivity of apparent ileal digestibility (AID) or standardized ileal digestibility (SID) of CP and AA in mixed diets containing multiple protein sources. Using the determined AID or SID for CP and AA in corn, soybean meal (SBM), corn distillers' dried grains with solubles (DDGS), or canola meal (CM), the AID or SID for 4 mixed diets based on corn-SBM, corn-SBM-DDGS, corn-SBM-CM, or corn-SBM-DDGS-CM were predicted and compared with determined AID or SID, respectively. Eighteen growing pigs (initial BW = 61.3 ± 5.5 kg) were surgically fitted with T-cannulas and assigned to a duplicated 9 × 4 incomplete Latin square design with 9 diets and 4 periods. The 9 experimental diets consisted of a nitrogen-free diet (NFD) to estimate basal ileal endogenous loss (BEL) of AA, 4 semipurified diets to determine the AID and SID of CP and AA in the 4 ingredients, and 4 mixed diets to test the additivity of AID and SID. Chromic oxide was added as an indigestible marker. Pigs were fed 1 of the 9 diets during each 7-d period, and ileal digesta were collected on d 6 and 7, from 0800 to 1800 h. The analyzed AA levels for the mixed diets were close to the calculated values based on the AA composition of each ingredient. The results revealed that the predicted SID were consistent with determined values, except for Leu, Thr, Asp, Cys, Pro, and Ser in the corn-SBM diet and Met and Cys in the corn-SBM-DDGS diet. The determined AID for total AA and Arg, His, Trp, Gly, and Pro in the corn-SBM diet were greater (P digestibility of AA in mixed diets containing multiple protein sources. In addition, the lack of additivity of AID in mixed diets could be attributed to the intrinsic characteristics of the feed ingredient, especially its AA content.

  7. Evaluation and standardization of different purification procedures for fish bile and liver metallothionein quantification by spectrophotometry and SDS-PAGE analyses.

    Science.gov (United States)

    Tenório-Daussat, Carolina Lyrio; Resende, Marcia Carolina Martinho; Ziolli, Roberta L; Hauser-Davis, Rachel Ann; Schaumloffel, Dirk; Saint'Pierre, Tatiana D

    2014-03-01

    Fish bile metallothioneins (MT) have been recently reported as biomarkers for environmental metal contamination; however, no studies regarding standardizations for their purification are available. Therefore, different procedures (varying centrifugation times and heat-treatment temperatures) and reducing agents (DTT, β-mercaptoethanol and TCEP) were applied to purify MT isolated from fish (Oreochromis niloticus) bile and liver. Liver was also analyzed, since these two organs are intrinsically connected and show the same trend regarding MT expression. Spectrophotometrical analyses were used to quantify the resulting MT samples, and SDS-PAGE gels were used to qualitatively assess the different procedure results. Each procedure was then statistically evaluated and a multivariate statistical analysis was then applied. A response surface methodology was also applied for bile samples, in order to further evaluate the responses for this matrix. Heat treatment effectively removes most undesired proteins from the samples, however results indicate that temperatures above 70 °C are not efficient since they also remove MTs from both bile and liver samples. Our results also indicate that the centrifugation times described in the literature can be decreased in order to analyze more samples in the same timeframe, of importance in environmental monitoring contexts where samples are usually numerous. In an environmental context, biliary MT was lower than liver MT, as expected, since liver accumulates MT with slower detoxification rates than bile, which is released from the gallbladder during feeding, and then diluted by water. Therefore, bile MT seems to be more adequate in environmental monitoring scopes regarding recent exposure to xenobiotics that may affect the proteomic and metalloproteomic expression of this biological matrix. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Addition of PM 2.5 into the national ambient air quality standards of China and the contribution to air pollution control: the case study of Wuhan, China.

    Science.gov (United States)

    You, Mingqing

    2014-01-01

    PM2.5 has gradually become a major environmental problem of China with its rapid economic development, urbanization, and increasing of motor vehicles. Findings and awareness of serious PM2.5 pollution make the PM2.5 a new criterion pollutant of the Chinese National Ambient Air Quality Standard (NAAQS) revised in 2012. The 2012 NAAQS sets the PM2.5 concentrate limitation with the 24-hour average value and the annual mean value. Wuhan is quite typical among central and southern China in climate, economy, development level, and energy consumption. The data are cited from the official website of Wuhan Environmental Protection Bureau and cover the period from 1 January to 30 June 2013. The data definitely confirm the existence of serious PM2.5 pollution in Wuhan and indicate that the addition of PM2.5 as a criterion pollutant significantly brings down the attainment rate of air quality. The example of Wuhan reveals that local governments should take measures to reduce the emission of PM2.5 if it affects the attainment rate and the performance evaluation value of air quality. The main contribution of 2012 NAAQS is that it brings down the attainment rate of the air quality and forces local governmental officials to take the measures accordingly.

  9. Addition of PM2.5 into the National Ambient Air Quality Standards of China and the Contribution to Air Pollution Control: The Case Study of Wuhan, China

    Directory of Open Access Journals (Sweden)

    Mingqing You

    2014-01-01

    Full Text Available PM2.5 has gradually become a major environmental problem of China with its rapid economic development, urbanization, and increasing of motor vehicles. Findings and awareness of serious PM2.5 pollution make the PM2.5 a new criterion pollutant of the Chinese National Ambient Air Quality Standard (NAAQS revised in 2012. The 2012 NAAQS sets the PM2.5 concentrate limitation with the 24-hour average value and the annual mean value. Wuhan is quite typical among central and southern China in climate, economy, development level, and energy consumption. The data are cited from the official website of Wuhan Environmental Protection Bureau and cover the period from 1 January to 30 June 2013. The data definitely confirm the existence of serious PM2.5 pollution in Wuhan and indicate that the addition of PM2.5 as a criterion pollutant significantly brings down the attainment rate of air quality. The example of Wuhan reveals that local governments should take measures to reduce the emission of PM2.5 if it affects the attainment rate and the performance evaluation value of air quality. The main contribution of 2012 NAAQS is that it brings down the attainment rate of the air quality and forces local governmental officials to take the measures accordingly.

  10. Do Simulation-Based Skill Exercises and Post-Encounter Notes Add Additional Value to a Standardized Patient-Based Clinical Skills Examination?

    Directory of Open Access Journals (Sweden)

    Michael D. Prislin

    2011-01-01

    Full Text Available Background. Standardized patient (SP clinical assessments have limited utility in assessing higher-level clinical competencies. This study explores the value of including simulation exercises and postencounter notes in an SP clinical skills examination. Methods. Two exercises involving cardiac auscultation and ophthalmic funduscopy simulations along with written post encounter notes were added to an SP-based performance examination. Descriptive analyses of students' performance and correlations with SP-based performance measures were obtained. Results. Students' abilities to detect abnormalities on physical exam were highly variable. There were no correlations between SP-based and simulation-derived measures of physical examination competency. Limited correlations were found between students' abilities to perform and document physical examinations and their formulation of appropriate differential diagnoses. Conclusions. Clinical simulation exercises add depth to SP-based assessments of performance. Evaluating the content of post encounter notes offers some insight into students' integrative abilities, and this appears to be improved by the addition of simulation-based post encounter skill exercises. However, further refinement of this methodology is needed.

  11. Methodology of Isochronal and Isothermal Anneals applied to Irradiated MOS Structures. Application to Post-Irradiation Effects (in Space, Accelerators) and Standard Test Procedures

    International Nuclear Information System (INIS)

    Chabrerie, Christian

    1997-01-01

    We report the development of a methodology using isochronal and isothermal anneals for the characterization of MOS (Metal - Oxide - Semiconductor) Transistors irradiated electronic components. We study the recovery kinetics of the post-irradiation effects and the modeling of the recovery temperature activated phenomena. This allows us to understand the basic physical mechanisms that have led to the definition of standard test procedures. The fields of application are numerous (space, military, accelerators for high energy physics, civilian nuclear and harsh environment robotics). We begin by outlining the context of our study and by presenting the actual standard test procedures (TM1019.4 and BS22900) used for the qualification of integrated circuits. We then review the different theories of the temperature activated phenomena. The link between the foundations of the normalized procedures and the thermally activated phenomena is clarified. From this analysis, we propose a new approach, mainly based on the use of isochronal anneals. During this work, we have developed two tools with this aim: - the first tool is software, it is a numerical simulation program for thermally activated phenomena. - The second is composed of a specific automated annealing bench (in particular isochronal), that we have designed. The applications and results are then presented in four parts: - the first presents simulation results computed using our calculation code, - the second concerns experimental results obtained with thin oxides from different rad-hard technologies and their application to study gate oxides of transistors, - the third develops results on non-hardened technological thick oxides and their consequences on the lateral leakage currents due to parasitic MOS structures in the 'commercial' components, - the fourth concerns the post-irradiation evolution of interface states during isochronal anneals. We conclude with a number of recommendations concerning the post

  12. Procedimientos Comunes de Operacion Para Juntas Responsabilidades y Derechos del Presidente, Vice Presidente, Secretaria, y Miembros (Standard Procedures of Operation for Meetings, Rights, and Responsibilities of the President, Vice President, Secretary, and Members).

    Science.gov (United States)

    Gonzalez, Ramon

    Of use to Parent Advisory Committees, this Spanish-English handout briefly describes the standard procedures used to conduct meetings and outlines the duties of committee officers and members. The pamphlet describes the standard order of business at a meeting, including calling a meeting to order, roll call, minutes, reports, unfinished and new…

  13. Multiparametric PET/CT-perfusion does not add significant additional information for initial staging in lung cancer compared with standard PET/CT

    Science.gov (United States)

    2014-01-01

    Background The purpose of this study was to assess the relationship of CT-perfusion (CTP), 18F-FDG-PET/CT and histological parameters, and the possible added value of CTP to FDG-PET/CT in the initial staging of lung cancer. Methods Fifty-four consecutive patients (median age 65 years, 15 females, 39 males) with suspected lung cancer were evaluated prospectively by CT-perfusion scan and 18F-FDG-PET/CT scan. Overall, 46 tumors were identified. CTP parameters blood flow (BF), blood volume (BV), and mean transit time (MTT) of the tumor tissue were calculated. Intratumoral microvessel density (MVD) was assessed quantitatively. Differences in CTP parameters concerning tumor type, location, PET positivity of lymph nodes, TNM status, and UICC stage were analyzed. Spearman correlation analyses between CTP and 18F-FDG-PET/CT parameters (SUVmax, SUVmean, PETvol, and TLG), MVD, tumor size, and tumor stage were performed. Results The mean BF (mL/100 mL min-1), BV (mL/100 mL), and MTT (s) was 35.5, 8.4, and 14.2, respectively. The BF and BV were lower in tumors with PET-positive lymph nodes (p = 0.02). However, the CTP values were not significantly different among the N stages. The CTP values were not different, depending on tumor size and location. No significant correlation was found between CTP parameters and MVD. Conclusions Overall, the CTP information showed only little additional information for the initial staging compared with standard FDG-PET/CT. Low perfusion in lung tumors might possibly be associated with metabolically active regional lymph nodes. Apart from that, both CTP and 18F-FDG-PET/CT parameter sets may reflect different pathophysiological mechanisms in lung cancer. PMID:24450990

  14. Sepsis and Critical Illness Research Center investigators: protocols and standard operating procedures for a prospective cohort study of sepsis in critically ill surgical patients.

    Science.gov (United States)

    Loftus, Tyler J; Mira, Juan C; Ozrazgat-Baslanti, Tezcan; Ghita, Gabriella L; Wang, Zhongkai; Stortz, Julie A; Brumback, Babette A; Bihorac, Azra; Segal, Mark S; Anton, Stephen D; Leeuwenburgh, Christiaan; Mohr, Alicia M; Efron, Philip A; Moldawer, Lyle L; Moore, Frederick A; Brakenridge, Scott C

    2017-08-01

    Sepsis is a common, costly and morbid cause of critical illness in trauma and surgical patients. Ongoing advances in sepsis resuscitation and critical care support strategies have led to improved in-hospital mortality. However, these patients now survive to enter state of chronic critical illness (CCI), persistent low-grade organ dysfunction and poor long-term outcomes driven by the persistent inflammation, immunosuppression and catabolism syndrome (PICS). The Sepsis and Critical Illness Research Center (SCIRC) was created to provide a platform by which the prevalence and pathogenesis of CCI and PICS may be understood at a mechanistic level across multiple medical disciplines, leading to the development of novel management strategies and targeted therapies. Here, we describe the design, study cohort and standard operating procedures used in the prospective study of human sepsis at a level 1 trauma centre and tertiary care hospital providing care for over 2600 critically ill patients annually. These procedures include implementation of an automated sepsis surveillance initiative, augmentation of clinical decisions with a computerised sepsis protocol, strategies for direct exportation of quality-filtered data from the electronic medical record to a research database and robust long-term follow-up. This study has been registered at ClinicalTrials.gov, approved by the University of Florida Institutional Review Board and is actively enrolling subjects. Dissemination of results is forthcoming. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  15. Effectiveness of facilitated introduction of a standard operating procedure into routine processes in the operating theatre: a controlled interrupted time series.

    Science.gov (United States)

    Morgan, Lauren; New, Steve; Robertson, Eleanor; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; Pickering, Sharon P; Hadi, Mohammed; Griffin, Damian; McCulloch, Peter

    2015-02-01

    Standard operating procedures (SOPs) should improve safety in the operating theatre, but controlled studies evaluating the effect of staff-led implementation are needed. In a controlled interrupted time series, we evaluated three team process measures (compliance with WHO surgical safety checklist, non-technical skills and technical performance) and three clinical outcome measures (length of hospital stay, complications and readmissions) before and after a 3-month staff-led development of SOPs. Process measures were evaluated by direct observation, using Oxford Non-Technical Skills II for non-technical skills and the 'glitch count' for technical performance. All staff in two orthopaedic operating theatres were trained in the principles of SOPs and then assisted to develop standardised procedures. Staff in a control operating theatre underwent the same observations but received no training. The change in difference between active and control groups was compared before and after the intervention using repeated measures analysis of variance. We observed 50 operations before and 55 after the intervention and analysed clinical data on 1022 and 861 operations, respectively. The staff chose to structure their efforts around revising the 'whiteboard' which documented and prompted tasks, rather than directly addressing specific task problems. Although staff preferred and sustained the new system, we found no significant differences in process or outcome measures before/after intervention in the active versus the control group. There was a secular trend towards worse outcomes in the postintervention period, seen in both active and control theatres. SOPs when developed and introduced by frontline staff do not necessarily improve operative processes or outcomes. The inherent tension in improvement work between giving staff ownership of improvement and maintaining control of direction needs to be managed, to ensure staff are engaged but invest energy in appropriate change

  16. Consistency Across Standards or Standards in a New Business Model

    Science.gov (United States)

    Russo, Dane M.

    2010-01-01

    Presentation topics include: standards in a changing business model, the new National Space Policy is driving change, a new paradigm for human spaceflight, consistency across standards, the purpose of standards, danger of over-prescriptive standards, a balance is needed (between prescriptive and general standards), enabling versus inhibiting, characteristics of success-oriented standards, characteristics of success-oriented standards, and conclusions. Additional slides include NASA Procedural Requirements 8705.2B identifies human rating standards and requirements, draft health and medical standards for human rating, what's been done, government oversight models, examples of consistency from anthropometry, examples of inconsistency from air quality and appendices of government and non-governmental human factors standards.

  17. Standard procedure of operation for the accomplishment of audit of quality in facilities of teletherapy with isotopic units of 60Co

    International Nuclear Information System (INIS)

    Larrinaga Cortina, Eduardo F.; Dominguez Hung, Lourdes; Campa Menendez, Raudel

    2001-01-01

    The use of the radiotherapy implies the necessity of rigorous quality standards in its different components, aiming to provide the best possible treatment and avoid potential patient's risks, that could even cause his/her death. Projects of technical cooperation have been developed in Cuba support by the International Atomic Energy Agency addresses to the implementation of Programs of Quality Assurance in radiotherapy services. The establishment of the National Quality Audit Program (PNAC) is a superior stage. The National Control Center for Medical Devices as the national regulator entity for the control and supervision of medical devices in the National Health System is the responsible for the making and execution of the PNAC. The audit modality selected was the inspection visit in situ due to its intrinsic advantages, our geographical extension and the number of radiotherapy services. This paper presents the methodology for the execution of the PNAC, in form of a Normalized Procedure of Operation that defines the objectives, scope, terms and definitions, responsibilities, composition and selection of the auditor team, security's conditions, materials and equipment, steps of the audit execution, results calculation and interpretation, records, etc. (author)

  18. Mortalidade relacionada ao tratamento endovascular do aneurisma da aorta abdominal com o uso dos modelos revisados Procedure-related mortality of endovascular abdominal aortic aneurysm repair using revised reporting standards

    Directory of Open Access Journals (Sweden)

    Gosen Gabriel Konig

    2007-03-01

    Full Text Available OBJETIVO: O objetivo do estudo foi avaliar a definição da mortalidade relacionada ao procedimento após tratamento endovascular do aneurisma de aorta abdominal (EVAR como definido pelo Committee for Standardized Reporting Practices in Vascular Surgery. MÉTODO: Dados de pacientes com aneurisma de aorta abdominal foram analisados do banco de dados EUROSTAR. Os pacientes foram submetidos ao EVAR entre junho de 1996 a fevereiro de 2004 e foram estudados retrospectivamente. A probabilidade explicita da causa de morte foi registrada. O intervalo entre a operação, alta hospitalar ou intervenção secundária até a morte foi registrado. RESULTADOS: De um total de 5612 pacientes, 589 (10,5% faleceram após o EVAR em acompanhamento total e qualquer causa de morte foi inclusa. Cento e quarenta e um pacientes (12,5% morreram devido a causa relacionada ao aneurisma, sendo que 28 (4,8% foram rupturas, 25 (4,2% infecções do implante e 88 (14,9% foram pacientes que morreram num prazo de 30 dias após o procedimento inicial (definição atualmente utilizada, também conhecido como resultado clínico a curto prazo. Além disso, 25 pacientes faleceram após 30 dias, mas continuavam ainda hospitalizados (ou transferidos a home-care para reavaliação posterior, ou necessitaram intervenção secundária. Levando em conta a duração da admissão ao hospital e a mortalidade imediata após o procedimento relacionada a intervenções secundárias, 49 mortes tardias também podem ser relacionadas ao EVAR. CONCLUSÃO: Morte tardia compõe uma proporção considerável da mortalidade relacionada ao EVAR dentro do tempo de análise revisado.OBJECTIVE: The aim of this study was to evaluate the definition of Procedure-related mortality after endovascular aneurysm repair (EVAR as defined by the Committee for Standardized Reporting Practices in Vascular Surgery. METHODS: Data on patients with an AAA were taken from the EUROSTAR database. The patients underwent EVAR

  19. Does the addition of specific acupuncture to standard swallowing training improve outcomes in patients with dysphagia after stroke? a randomized controlled trial.

    Science.gov (United States)

    Xia, Wenguang; Zheng, Chanjuan; Zhu, Suiqiang; Tang, Zhouping

    2016-03-01

    To assess the effect of adding acupuncture to standard swallowing training for patients with dysphagia after stroke. Single-blind randomized controlled trial. Inpatient and outpatient clinics. A total of 124 patients with dysphagia after stroke were randomly divided into two groups: acupuncture and control. The acupuncture group received standard swallowing training and acupuncture treatment. In comparison, the control group only received standard swallowing training. Participants in both groups received six days of therapy per week for a four-week period. The primary outcome measures included the Standardized Swallowing Assessment and the Dysphagia Outcome Severity Scale. The secondary outcome measures included the Modified Barthel Index and Swallowing-Related Quality of Life, which were assessed before and after the four-week therapy period. A total of 120 dysphagic subjects completed the study (60 in acupuncture group and 60 in control group). Significant differences existed in the Standardized Swallowing Assessment, Dysphagia Outcome Severity Scale, Modified Barthel Index, and Swallowing-Related Quality of Life scores of each group after the treatment (P Dysphagia Outcome Severity Scale (mean difference 2.3; 95% CI 0.7 to 1.2; P Quality of Life scores (mean difference 31.4; 95% CI 3.2 to 11.4; P < 0.01) showed more significant improvement in the acupuncture group than the control group. Acupuncture combined with the standard swallowing training may be beneficial for dysphagic patients after stroke. © The Author(s) 2015.

  20. Postoperative pain medication requirements in patients undergoing computer-assisted (“Robotic”) and standard laparoscopic procedures for newly diagnosed endometrial cancer.

    Science.gov (United States)

    Leitao, Mario M; Malhotra, Vivek; Briscoe, Gabriel; Suidan, Rudy; Dholakiya, Priyal; Santos, Kevin; Jewell, Elizabeth L; Brown, Carol L; Sonoda, Yukio; Abu-Rustum, Nadeem R; Barakat, Richard R; Gardner, Ginger J

    2013-10-01

    patients who had undergone an RBT hysterectomy compared to a standard total LSC hysterectomy for benign indications.13 A recent cost analysis suggested that patients experienced less pain and required less pain medication use after RBT procedures compared to LSC for endometrial cancer.14 Based on these reports, we sought to analyze postoperative pain and the use of pain medication in patients undergoing RBT compared to standard transperitoneal LSC procedures for newly diagnosed endometrial cancer during a concurrent time period. Of note, current RBT surgery is not truly robotic in that it is not autonomous. A more appropriate term is “computer-assisted surgery,” but to satisfy current convention, we refer to it as “robotic surgery” in this manuscript.

  1. Standard operating procedures for collection of soil and sediment samples for the Sediment-bound Contaminant Resiliency and Response (SCoRR) strategy pilot study

    Science.gov (United States)

    Fisher, Shawn C.; Reilly, Timothy J.; Jones, Daniel K.; Benzel, William M.; Griffin, Dale W.; Loftin, Keith A.; Iwanowicz, Luke R.; Cohl, Jonathan A.

    2015-12-17

    An understanding of the effects on human and ecological health brought by major coastal storms or flooding events is typically limited because of a lack of regionally consistent baseline and trends data in locations proximal to potential contaminant sources and mitigation activities, sensitive ecosystems, and recreational facilities where exposures are probable. In an attempt to close this gap, the U.S. Geological Survey (USGS) has implemented the Sediment-bound Contaminant Resiliency and Response (SCoRR) strategy pilot study to collect regional sediment-quality data prior to and in response to future coastal storms. The standard operating procedure (SOP) detailed in this document serves as the sample-collection protocol for the SCoRR strategy by providing step-by-step instructions for site preparation, sample collection and processing, and shipping of soil and surficial sediment (for example, bed sediment, marsh sediment, or beach material). The objectives of the SCoRR strategy pilot study are (1) to create a baseline of soil-, sand-, marsh sediment-, and bed-sediment-quality data from sites located in the coastal counties from Maine to Virginia based on their potential risk of being contaminated in the event of a major coastal storm or flooding (defined as Resiliency mode); and (2) respond to major coastal storms and flooding by reoccupying select baseline sites and sampling within days of the event (defined as Response mode). For both modes, samples are collected in a consistent manner to minimize bias and maximize quality control by ensuring that all sampling personnel across the region collect, document, and process soil and sediment samples following the procedures outlined in this SOP. Samples are analyzed using four USGS-developed screening methods—inorganic geochemistry, organic geochemistry, pathogens, and biological assays—which are also outlined in this SOP. Because the SCoRR strategy employs a multi-metric approach for sample analyses, this

  2. Does the addition of specific acupuncture to standard swallowing training improve outcomes in patients with dysphagia after stroke? a randomized controlled trial

    Science.gov (United States)

    Xia, Wenguang; Zheng, Chanjuan; Zhu, Suiqiang; Tang, Zhouping

    2015-01-01

    Objective: To assess the effect of adding acupuncture to standard swallowing training for patients with dysphagia after stroke. Design: Single-blind randomized controlled trial. Setting: Inpatient and outpatient clinics. Subjects: A total of 124 patients with dysphagia after stroke were randomly divided into two groups: acupuncture and control. Interventions: The acupuncture group received standard swallowing training and acupuncture treatment. In comparison, the control group only received standard swallowing training. Participants in both groups received six days of therapy per week for a four-week period. Main measures: The primary outcome measures included the Standardized Swallowing Assessment and the Dysphagia Outcome Severity Scale. The secondary outcome measures included the Modified Barthel Index and Swallowing-Related Quality of Life, which were assessed before and after the four-week therapy period. Results: A total of 120 dysphagic subjects completed the study (60 in acupuncture group and 60 in control group). Significant differences existed in the Standardized Swallowing Assessment, Dysphagia Outcome Severity Scale, Modified Barthel Index, and Swallowing-Related Quality of Life scores of each group after the treatment (P Dysphagia Outcome Severity Scale (mean difference 2.3; 95% CI 0.7 to 1.2; P < 0.01), Modified Barthel Index (mean difference 17.2; 95% CI 2.6 to 9.3; P < 0.05) and Swallowing-Related Quality of Life scores (mean difference 31.4; 95% CI 3.2 to 11.4; P < 0.01) showed more significant improvement in the acupuncture group than the control group. Conclusions: Acupuncture combined with the standard swallowing training may be beneficial for dysphagic patients after stroke. PMID:25819076

  3. Relaxation of Summer Gasoline Volatility Standard for Jefferson and Shelby counties, Alabama (“the Birmingham area”) Final action Additional Resources

    Science.gov (United States)

    Federal Registers and fact sheets about EPA taking final action to approve a request from the state of Alabama for the EPA to relax the Reid Vapor Pressure standard applicable to gasoline introduced into commerce in the summer time are here.

  4. Chapter 2. Surge capacity and infrastructure considerations for mass critical care. Recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza epidemic or mass disaster

    NARCIS (Netherlands)

    Hick, John L.; Christian, Michael D.; Sprung, Charles L.; Camargo, Ruben; Ceraso, Daniel; Azoulay, Elie; Duguet, Alexandre; Guery, Benoit; Reinhart, Konrad; Adini, Bruria; Barlavie, Yaron; Benin-Goren, Odeda; Cohen, Robert; Klein, Motti; Leoniv, Yuval; Margalit, Gila; Rubinovitch, Bina; Sonnenblick, Moshe; Steinberg, Avraham; Weissman, Charles; Wolff, Donna; Kesecioglu, Jozef; de Jong, Menno; Moreno, Rui; An, Youzhong; Du, Bin; Joynt, Gavin M.; Colvin, John; Loo, Shi; Richards, Guy; Artigas, Antonio; Pugin, Jerome; Amundson, Dennis; Devereaux, Asha; Beigel, John; Danis, Marion; Farmer, Chris; Maki, Dennis; Masur, Henry; Rubinson, Lewis; Sandrock, Christian; Talmor, Daniel; Truog, Robert; Zimmerman, Janice; Brett, Steve; Montgomery, Hugh; Rhodes, Andrew; Sanderson, Frances; Taylor, Bruce; Monrgomery, Hugh

    2010-01-01

    To provide recommendations and standard operating procedures for intensive care unit (ICU) and hospital preparations for a mass disaster or influenza epidemic with a specific focus on surge capacity and infrastructure considerations. Based on a literature review and expert opinion, a Delphi process

  5. European Organisation for Research and Treatment of Cancer (EORTC) Pathobiology Group standard operating procedure for the preparation of human tumour tissue extracts suited for the quantitative analysis of tissue-associated biomarkers.

    Science.gov (United States)

    Schmitt, Manfred; Mengele, Karin; Schueren, Elisabeth; Sweep, Fred C G J; Foekens, John A; Brünner, Nils; Laabs, Juliane; Malik, Abha; Harbeck, Nadia

    2007-03-01

    With the new concept of 'individualized treatment and targeted therapies', tumour tissue-associated biomarkers have been given a new role in selection of cancer patients for treatment and in cancer patient management. Tumour biomarkers can give support to cancer patient stratification and risk assessment, treatment response identification, or to identifying those patients who are expected to respond to certain anticancer drugs. As the field of tumour-associated biomarkers has expanded rapidly over the last years, it has become increasingly apparent that a strong need exists to establish guidelines on how to easily disintegrate the tumour tissue for assessment of the presence of tumour tissue-associated biomarkers. Several mechanical tissue (cell) disruption techniques exist, ranging from bead mill homogenisation and freeze-fracturing through to blade or pestle-type homogenisation, to grinding and ultrasonics. Still, only a few directives have been given on how fresh-frozen tumour tissues should be processed for the extraction and determination of tumour biomarkers. The PathoBiology Group of the European Organisation for Research and Treatment of Cancer therefore has devised a standard operating procedure for the standardised preparation of human tumour tissue extracts which is designed for the quantitative analysis of tumour tissue-associated biomarkers. The easy to follow technical steps involved require 50-300 mg of deep-frozen cancer tissue placed into small size (1.2 ml) cryogenic tubes. These are placed into the shaking flask of a Mikro-Dismembrator S machine (bead mill) to pulverise the tumour tissue in the capped tubes in the deep-frozen state by use of a stainless steel ball, all within 30 s of exposure. RNA is isolated from the pulverised tissue following standard procedures. Proteins are extracted from the still frozen pulverised tissue by addition of Tris-buffered saline to obtain the cytosol fraction of the tumour or by the Tris buffer supplemented with

  6. Do English NHS Microbiology laboratories offer adequate services for the diagnosis of UTI in children? Healthcare Quality Improvement Partnership (HQIP) Audit of Standard Operational Procedures.

    Science.gov (United States)

    McNulty, Cliodna A M; Verlander, Neville Q; Moore, Philippa C L; Larcombe, James; Dudley, Jan; Banerjee, Jaydip; Jadresic, Lyda

    2015-09-01

    The National Institute of Care Excellence (NICE) 2007 guidance CG54, on urinary tract infection (UTI) in children, states that clinicians should use urgent microscopy and culture as the preferred method for diagnosing UTI in the hospital setting for severe illness in children under 3 years old and from the GP setting in children under 3 years old with intermediate risk of severe illness. NICE also recommends that all 'infants and children with atypical UTI (including non-Escherichia coli infections) should have renal imaging after a first infection'. We surveyed all microbiology laboratories in England with Clinical Pathology Accreditation to determine standard operating procedures (SOPs) for urgent microscopy, culture and reporting of children's urine and to ascertain whether the SOPs facilitate compliance with NICE guidance. We undertook a computer search in six microbiology laboratories in south-west England to determine urine submissions and urine reports in children under 3 years. Seventy-three per cent of laboratories (110/150) participated. Enterobacteriaceae that were not E. coli were reported only as coliforms (rather than non-E. coli coliforms) by 61% (67/110) of laboratories. Eighty-eight per cent of laboratories (97/110) provided urgent microscopy for hospital and 54% for general practice (GP) paediatric urines; 61% of laboratories (confidence interval 52-70%) cultured 1 μl volume of urine, which equates to one colony if the bacterial load is 106 c.f.u. l(-1). Only 22% (24/110) of laboratories reported non-E. coli coliforms and provided urgent microscopy for both hospital and GP childhood urines; only three laboratories also cultured a 5 μl volume of urine. Only one of six laboratories in our submission audit had a significant increase in urine submissions and urines reported from children less than 3 years old between the predicted pre-2007 level in the absence of guidance and the 2008 level following publication of the NICE guidance. Less than a

  7. Comparison of IEEE383-2003 and IEC60505-2004 standards for harmonization of environmental qualification procedure of electric cable

    International Nuclear Information System (INIS)

    Kim, Jong Seog; Jeong, Sun Chul; Park, Kyung Heum; Jang, Kyung Nam

    2010-01-01

    Needs for harmonization of international equipment qualification(EQ) standards have been raised several years due to purchasing problem of nuclear equipment supplied from abroad country. To meet the regulatory requirement of domestic nuclear power plant, manufacturers have to qualify their equipment in accordance with each standard such as IEEE, IEC and RCC-E. Double qualification increase the equipment cost, which result in high construction cost. Even the unification of each standard have been discussed several years, we have got the long way to go yet. Comparison and harmonization of each international standard will give help to purchase the equipment qualified by not endorsed standard. Environmental qualification, seismic qualification and EMI/EMC qualification are major targets for harmonization. Since concern about cable qualification of 60 years life has been raised recently, harmonization of cable qualification standard also needs to be discussed. KEPRI launched a project for harmonization of EQ relative standards such as IEEE, IEC and RCC-E. A study for harmonization of IEEE323 and IEC60780 is known in progress by IEEE committee. In this paper, harmonization of international standards for cable qualification will be discussed. IEEE383 standard is qualification standard for electric cable broadly used in Asian pacific area while IEC60505 is mostly used in European area. Since these two standards have different requirements for environmental qualification of cable, problem can be happened in the plant site when they purchase cable qualified by not endorsed standard. IEEE383-2003 and IEC60505-2004 is the latest version of each standard. Comparison results and recommendations for harmonization of these two standards are introduced herein

  8. Standards for holdup measurement

    International Nuclear Information System (INIS)

    Zucker, M.S.

    1982-01-01

    Holdup measurement, needed for material balance, depend intensively on standards and on interpretation of the calibration procedure. More than other measurements, the calibration procedure using the standard becomes part of the standard. Standards practical for field use and calibration techniques have been developed. While accuracy in holdup measurements is comparatively poor, avoidance of bias is a necessary goal

  9. Study of verification and validation of standard welding procedure specifications guidelines for API 5L X-70 grade line pipe welding

    Directory of Open Access Journals (Sweden)

    Qazi H. A. A.

    2017-12-01

    Full Text Available Verification and validation of welding procedure specifications for X-70 grade line pipe welding was performed as per clause 8.2, Annexure B and D of API 5L, 45th Edition to check weld integrity in its future application conditions. Hot rolled coils were imported from China, de-coiling, strip edge milling, three roller bending to from pipe, inside and outside submerged arc welding of pipe, online ultrasonic testing of weld, HAZ and pipe body, cutting at fixed random length of pipe, visual inspection of pipe, Fluoroscopic inspection of pipe, welding procedure qualification test pieces marking at weld portion of the pipe, tensile testing, guided bend testing, CVN Impact testing were performed. Detailed study was conducted to explore possible explanations and variation in mechanical properties, WPS is examined and qualified as per API 5L 45th Edition.

  10. Change of serum prealbumin levels and serum protein markers between egg white powder and casein protein additives in standard enteral feeding formulas in critically ill patients with acute respiratory failure.

    Science.gov (United States)

    Bhurayanontachai, Rungsun; Sa-Nguansai, Sunatee

    2016-01-01

    Protein deficiency is a major problem in critically ill patients. Egg white powder recently became a standard additive for protein supplementation in our unit. However, clinical data are not available to support egg white powder supplementation compared to standard protein casein supplementation. This study aimed to determine the change of serum prealbumin (PAB) levels of egg white powder compared to casein additive in standard enteral feeding in critically ill patients with respiratory failure. A prospective double-blind, randomized, non-inferiority study was conducted in patients with acute respiratory failure in the medical intensive care unit and respiratory care unit. These patients randomly received 1500 kcal/day of enteral nutrition support with 40 g/day of protein additives by either egg white protein powder or casein protein for 7 days. The serum PAB and C-reactive protein (CRP) levels were measured on days 1, 3, 5, and 7. Repeated-measures ANOVA determined the group effects displayed by serum PAB and CRP levels. p values egg white powder group. The clinical characteristics, baseline nutritional status, and biochemistries were not significantly different between the groups. No statistically significant differences were seen in the serum PAB and serum CRP levels between the two groups. The average mean ± SEM difference of serum PAB level between the groups was 2.3 ± 2.5 mg% (p = 0.58). The levels of PAB between the egg white protein additive and casein protein additive were not significantly different and less than the non-inferior margin. Thai Clinical Trials Registry TCTR20160126002.

  11. Food additives

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/002435.htm Food additives To use the sharing features on this page, please enable JavaScript. Food additives are substances that become part of a food ...

  12. Development and Monte Carlo Study of a Procedure for Correcting the Standardized Mean Difference for Measurement Error in the Independent Variable

    Science.gov (United States)

    Nugent, William Robert; Moore, Matthew; Story, Erin

    2015-01-01

    The standardized mean difference (SMD) is perhaps the most important meta-analytic effect size. It is typically used to represent the difference between treatment and control population means in treatment efficacy research. It is also used to represent differences between populations with different characteristics, such as persons who are…

  13. The procedure of evaluating the practical adhesion strength of new biocompatible nano- and micro-thin films in accordance with international standards

    Czech Academy of Sciences Publication Activity Database

    Kutílek, P.; Mikšovský, Jan

    2011-01-01

    Roč. 13, č. 3 (2011), s. 87-94 ISSN 1509-409X Institutional research plan: CEZ:AV0Z10100522 Keywords : practical adhesion * strength * nano-layer * micro-layer * international standards * scratch test Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.449, year: 2011 http://382.indexcopernicus.com/abstracted.php?level=5&ICID=962671

  14. Procedure for the standardized measure of the detective quantum efficiency in digital mammography; Procedimiento para la medida estandarizada de la Eficiencia Cuantica de Deteccion en un mamografo digital

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Martin, G.; Garcia Castano, P.; Bermudez Luna, R.; Fernandez Bedoya, V.; Espana Lopez, M. L.; Miquelez Alonso, S.

    2011-07-01

    The objective of this work is to develop a simple guide for determining the DQE, according to the CEI, in those having mammography flat panel detectors, and highlight the main difficulties that may be in the process of the standardized measurement.

  15. Relevant Standards

    Indian Academy of Sciences (India)

    .86: Ethernet over LAPS. Standard in China and India. G.7041: Generic Framing Procedure (GFP). Supports Ethernet as well as other data formats (e.g., Fibre Channel); Protocol of ... IEEE 802.3x for flow control of incoming Ethernet data ...

  16. Developing policies and procedures.

    Science.gov (United States)

    Randolph, Susan A

    2006-11-01

    The development of policies and procedures is an integral part of the occupational health nurse's role. Policies and procedures serve as the foundation for the occupational health service and are based on its vision, mission, culture, and values. The design and layout selected for the policies and procedures should be simple, consistent, and easy to use. The same format should be used for all existing and new policies and procedures. Policies and procedures should be reviewed periodically based on a specified time frame (i.e., annually). However, some policies may require a more frequent review if they involve rapidly changing external standards, ethical issues, or emerging exposures.

  17. Consent for routine neonatal procedures: A study of practices in Irish neonatal units. How do we compare with the gold standard BAPM guidelines?

    LENUS (Irish Health Repository)

    Ryan, M A

    2017-06-01

    The Irish National Consent Policy (NCP)¹ proposes that the legal requirement for consent extends to all forms of interventions, investigations and treatment, carried out on or behalf of the Health Service Executive (HSE). This study employs a quantitative descriptive approach to investigate the practices for obtaining consent for an identified group of routine neonatal procedures in neonatal facilities throughout Ireland. The BAPM (British Association of Perinatal Medicine)² guidelines were identified as ‘gold standard’ for the purposes of this study. The results indicated a lack of consistency between participating units pertaining to the modes of consent utilised and notable variances from ‘gold standard’ guidelines. Unanimity was evident for 3 procedures only (administering BCG, 6-in-1, and donor breast milk to infant). Significant findings related to EEG with video recordings, MRI\\/CT and gastro intestinal imaging, screening of an infant with suspected substance abuse or retinopathy of prematurity screening (ROP), administration of Vitamin K, and the carrying out of a lumbar puncture.

  18. Advantages of a validated UPLC-MS/MS standard addition method for the quantification of A-type dimeric and trimeric proanthocyanidins in cranberry extracts in comparison with well-known quantification methods.

    Science.gov (United States)

    van Dooren, Ines; Foubert, Kenn; Theunis, Mart; Naessens, Tania; Pieters, Luc; Apers, Sandra

    2018-01-30

    The berries of Vaccinium macrocarpon, cranberry, are widely used for the prevention of urinary tract infections. This species contains A-type proanthocyanidins (PACs), which intervene in the initial phase of the development of urinary tract infections by preventing the adherence of Escherichia coli by their P-type fimbriae to uroepithelial cells. Unfortunately, the existing clinical studies used different cranberry preparations, which were poorly standardized. Because of this, the results were hard to compare, which led sometimes to conflicting results. Currently, PACs are quantified using the rather non-specific spectrophotometric 4-dimethylaminocinnamaldehyde (DMAC) method. In addition, a normal phase HPTLC-densitometric method, a HPLC-UV method and three LC-MS/MS methods for quantification of procyanidin A2 were recently published. All these methods contain some shortcomings and errors. Hence, the development and validation of a fast and sensitive standard addition LC-MS/MS method for the simultaneous quantification of A-type dimers and trimers in a cranberry dry extract was carried out. A linear calibration model could be adopted for dimers and, after logaritmic transformation, for trimers. The maximal interday and interconcentration precision was found to be 4.86% and 4.28% for procyanidin A2, and 5.61% and 7.65% for trimeric PACs, which are all acceptable values for an analytical method using LC-MS/MS. In addition, twelve different cranberry extracts were analyzed by means of the newly validated method and other widely used methods. There appeared to be an enormous variation in dimeric and trimeric PAC content. Comparison of these results with LC-MS/MS analysis without standard addition showed the presence of matrix effects for some of the extracts and proved the necessity of standard addition. A comparison of the well-known and widely used DMAC method, the butanol-HCl assay and this newly developed LC-MS/MS method clearly indicated the need for a reliable

  19. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  20. Elaboration and implementation of standard operational procedure for quality assurance of cone beam CT image in radiotherapy; Elaboracao e implementacao de procedimentos operacionais padrao para controle de qualidade da imagem CBCT em radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Bonatto, Larisse N.; Estacio, Daniela R.; Lopes, Juliane S.; Sansson, Angela; Duarte, Lucas O.; Sbaraini, Patricia; Silva, Ana M. Marques da; Streck, Elaine E., E-mail: larisse.neumann@pucrs.br [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil)

    2016-07-01

    The objective of this article is to present the implementation of the quality Control of Cone Beam Computed Tomography (CBCT) image, generated by the On-Board Imager, integrated with the linear accelerator Trilogy. Standard operating procedures (POPs) have been developed based on the literature and manuals of the simulator object Catphan 504 and the On-Board Imager. The following POPs were developed: acquisition of the CBCT image; linearity of CT number; uniformity; spatial resolution; low contrast resolution; spatial linearity; thickness of the cut. The validation of the elaborated procedures was done from an experimental acquisition of the simulator object. The results obtained in the validation of the POPs are in compliance with the parameters established by the manufacturer of the simulator object, as well as those obtained in the acceptance of the On-Board Imager device.

  1. Elaboration and implementation of standard operational procedure for quality assurance of cone beam CT image in radiotherapy; Elaboracao e implementacao de procedimentos operacionais padrao para controle de qualidade da imagem CBCT em radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Bonatto, Larisse N.; Estacio, Daniela R.; Lopes, Juliane S.; Sansson, Angela; Duarte, Lucas O.; Sbaraini, Patricia, E-mail: larisse.neumann@pucrs.br [Hospital Sao Lucas (PUC-RS), Porto Alegre, RS (Brazil). Servico de Radioterapia; Silva, Ana M. Marques da; Streck, Elaine E. [Pontificia Universidade Catolica do Rio Grande do Sukl (PUC-RS), Porto Alegre, RS (Brazil). Faculdade de Fisica

    2016-07-01

    The aim of this paper is to present the implementation of image quality control of the computed tomography cone beam (CBCT), generated by the On-Board Imager device, and integrated into the linear accelerator Trilogy. To this end, standard operating procedures (SOP) based on the literature and Catphan 504 phantom and On-Board Imager manuals were drafted. The following SOPs were prepared: acquisition of CBCT image; CT number linearity; uniformity; spatial resolution; low contrast resolution; spatial linearity; slice thickness. The validation of the procedures from an experimental acquisition of the phantom was performed. The results, obtained in the SOP validation, are in accordance with the parameters established by the phantom manufacturer, as well as those obtained in the On-Board Imager device acceptance. (author)

  2. Addition of docetaxel or bisphosphonates to standard of care in men with localised or metastatic, hormone-sensitive prostate cancer: a systematic review and meta-analyses of aggregate data.

    Science.gov (United States)

    Vale, Claire L; Burdett, Sarah; Rydzewska, Larysa H M; Albiges, Laurence; Clarke, Noel W; Fisher, David; Fizazi, Karim; Gravis, Gwenaelle; James, Nicholas D; Mason, Malcolm D; Parmar, Mahesh K B; Sweeney, Christopher J; Sydes, Matthew R; Tombal, Bertrand; Tierney, Jayne F

    2016-02-01

    Results from large randomised controlled trials combining docetaxel or bisphosphonates with standard of care in hormone-sensitive prostate cancer have emerged. In order to investigate the effects of these therapies and to respond to emerging evidence, we aimed to systematically review all relevant trials using a framework for adaptive meta-analysis. For this systematic review and meta-analysis, we searched MEDLINE, Embase, LILACS, and the Cochrane Central Register of Controlled Trials, trial registers, conference proceedings, review articles, and reference lists of trial publications for all relevant randomised controlled trials (published, unpublished, and ongoing) comparing either standard of care with or without docetaxel or standard of care with or without bisphosphonates for men with high-risk localised or metastatic hormone-sensitive prostate cancer. For each trial, we extracted hazard ratios (HRs) of the effects of docetaxel or bisphosphonates on survival (time from randomisation until death from any cause) and failure-free survival (time from randomisation to biochemical or clinical failure or death from any cause) from published trial reports or presentations or obtained them directly from trial investigators. HRs were combined using the fixed-effect model (Mantel-Haenzsel). We identified five eligible randomised controlled trials of docetaxel in men with metastatic (M1) disease. Results from three (CHAARTED, GETUG-15, STAMPEDE) of these trials (2992 [93%] of 3206 men randomised) showed that the addition of docetaxel to standard of care improved survival. The HR of 0·77 (95% CI 0·68-0·87; pbisphosphonates for men with M1 disease. Survival results from three of these trials (2740 [88%] of 3109 men) showed that addition of bisphosphonates improved survival (0·88 [0·79-0·98]; p=0·025), which translates to 5% (1-8) absolute improvement, but this result was influenced by the positive result of one trial of sodium clodronate, and we found no evidence of a

  3. Balancing energy conservation and occupant needs in ventilation rate standards for Big Box stores and other commercial buildings in California. Issues related to the ASHRAE 62.1 Indoor Air Quality Procedure

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, Mark J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Apte, Mike G. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-10-31

    This report considers the question of whether the California Energy Commission should incorporate the ASHRAE 62.1 ventilation standard into the Title 24 ventilation rate (VR) standards, thus allowing buildings to follow the Indoor Air Quality Procedure. This, in contrast to the current prescriptive standard, allows the option of using ventilation rate as one of several strategies, which might include source reduction and air cleaning, to meet specified targets of indoor air concentrations and occupant acceptability. The research findings reviewed in this report suggest that a revised approach to a ventilation standard for commercial buildings is necessary, because the current prescriptive ASHRAE 62.1 Ventilation Rate Procedure (VRP) apparently does not provide occupants with either sufficiently acceptable or sufficiently healthprotective air quality. One possible solution would be a dramatic increase in the minimum ventilation rates (VRs) prescribed by a VRP. This solution, however, is not feasible for at least three reasons: the current need to reduce energy use rather than increase it further, the problem of polluted outdoor air in many cities, and the apparent limited ability of increasing VRs to reduce all indoor airborne contaminants of concern (per Hodgson (2003)). Any feasible solution is thus likely to include methods of pollutant reduction other than increased outdoor air ventilation; e.g., source reduction or air cleaning. The alternative 62.1 Indoor Air Quality Procedure (IAQP) offers multiple possible benefits in this direction over the VRP, but seems too limited by insufficient specifications and inadequate available data to provide adequate protection for occupants. Ventilation system designers rarely choose to use it, finding it too arbitrary and requiring use of much non-engineering judgment and information that is not readily available. This report suggests strategies to revise the current ASHRAE IAQP to reduce its current limitations. These

  4. BTS statistical standards manual

    Science.gov (United States)

    2005-10-01

    The Bureau of Transportation Statistics (BTS), like other federal statistical agencies, establishes professional standards to guide the methods and procedures for the collection, processing, storage, and presentation of statistical data. Standards an...

  5. Lack of standardization in the procedures for mycological examination of sputum samples from CF patients: a possible cause for variations in the prevalence of filamentous fungi.

    Science.gov (United States)

    Borman, Andrew M; Palmer, Michael D; Delhaes, Laurence; Carrère, Jacqueline; Favennec, Loïc; Ranque, Stéphane; Gangneux, Jean-Pierre; Horré, Regine; Bouchara, Jean-Philippe

    2010-11-01

    Filamentous fungi and yeasts are increasingly isolated from respiratory secretions of patients with cystic fibrosis (CF), and persistent fungal colonization of the airways of such patients is thought to exacerbate lung damage. While many independent studies have identified Aspergillus fumigatus complex as the principal colonizing fungus in CF, increased awareness of the role of fungi in CF pathology coupled with improved mycological culture and identification methods have resulted in a number of other fungi being isolated and reported from CF sputum samples, including A. terreus, members of the Pseudallescheria boydii/Scedosporium apiospermum complex, Exophiala dermatitidis, Paecilomyces and Penicillium species. However, the range of fungal pathogens isolated and the relative prevalence of individual species vary widely between reports from different geographical CF centres, and as yet no standardized method for the mycological examination of CF sputum samples has been adopted. Here, we examine the potential contribution of the mycological methods employed to examine CF respiratory secretions relative to the variability in the fungal biota reported. The role of direct microscopic examination of respiratory samples and the impact of the culture conditions used on the detection of specific fungal pathogens are addressed, and the potential significance of isolation of yeast species from CF patient airways is discussed.

  6. The addition of tramadol to the standard of i.v. acetaminophen and morphine infusion for postoperative analgesia in neonates offers no clinical benefit: a randomized placebo-controlled trial.

    Science.gov (United States)

    Olischar, Monika; Palmer, Greta M; Orsini, Francesca; Davidson, Andrew J; Perkins, Elizabeth J; Lee, Katherine J; Everest, Neil J; Cranswick, Noel E; Hunt, Rod W

    2014-11-01

    Tramadol is used following neonatal cardiac and general surgery. However, its ability to opioid-spare or facilitate earlier extubation in postoperative neonates is unquantified. This randomized placebo-controlled trial aimed to assess whether tramadol's addition to standard analgesia resulted in earlier extubation or reduced analgesic/sedative requirements in postsurgical neonates. Neonates born ≥32 weeks postmenstrual age received either tramadol [T] 2 mg·kg(-1) or placebo [P] 6-hourly for up to 5 days postthoracoabdominal surgery in addition to morphine (commenced at 20 mcg·kg(-1) ·h(-1)) and 6-hourly i.v. acetaminophen. Time to extubation, morphine and midazolam amounts, hourly pain scores, and seizure activity were compared using an intention-to-treat and per-protocol analysis. Seventy-one neonates participated. Median survival time to extubation was similar between the groups (T 67 h [95% CI 51, 84] vs P 52 h [95%CI 43, 65]; P = 0.4), and similar numbers were extubated by 96 h (T 69% vs P 77%; difference -8%, 95%CI -28, 13%). Morphine and midazolam exposure was similar, with low pain scores in both groups (mean percentage of time with a pain score >5/20 during the 5 days: T 13% vs P 11%, difference in means 2.8 [95% CI -1.8, 7.6], P = 0.20). Most participants had normal cranial ultrasounds (T 86% vs P 86%); no seizures occurred clinically or electroencephalographically. Tramadol's addition to standard analgesia in this small group of postsurgical neonates did not appear to have any positive effect on time to extubation, morphine or midazolam exposure, or pain scores. This questions the benefit of tramadol for postsurgical neonates. Importantly, no seizures occurred in these ill neonates who may potentially be at greater risk of tramadol toxicity compared with adults. © 2014 John Wiley & Sons Ltd.

  7. Phosphazene additives

    Science.gov (United States)

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  8. Additive and polynomial representations

    CERN Document Server

    Krantz, David H; Suppes, Patrick

    1971-01-01

    Additive and Polynomial Representations deals with major representation theorems in which the qualitative structure is reflected as some polynomial function of one or more numerical functions defined on the basic entities. Examples are additive expressions of a single measure (such as the probability of disjoint events being the sum of their probabilities), and additive expressions of two measures (such as the logarithm of momentum being the sum of log mass and log velocity terms). The book describes the three basic procedures of fundamental measurement as the mathematical pivot, as the utiliz

  9. Quantization Procedures

    International Nuclear Information System (INIS)

    Cabrera, J. A.; Martin, R.

    1976-01-01

    We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs

  10. WP1 Development of New Standardization Process

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2016-01-01

    The purpose of this work package can be divided into two main areas: 1. Review of existing standardization procedures with focus on leading edge fatigue cracks and recommendations / rules for avoiding leading edge cracks. 2. Development of a new standardization process focusing on leading edge...... cracks. The process must include a practical approach which can be implemented as an add-on to the recent certification procedure. In addition to these main areas focus is also on cost models related to the costs of blade defects, inspections, repair and maintenance needed as a consequence...

  11. [Standardizing the manipulation procedure of acupuncture-moxibustion, reinforcing the training of' clinical skill: learning experience of Acupuncture-moxibustion Clinical Skills Training: Chapter of Commonly Used Needling and Moxibustion Techniques].

    Science.gov (United States)

    Tian, Hongfang; Yang, Chao; Tang, Jie; Qin, Qiuguo; Zhao, Mingwen; Zhao, Jiping

    2015-07-01

    The book Acupuncture-moxibustion Clinical Skills Training is one of "Twelfth Five-Year Plan" in novative teaching materials, which is published by People's Medical Publishing House. Through learning the first half of the book commonly used needling and moxibustion techniques, it is realized that the selection of book content is reasonable and much attention is paid to needling and moxibustion techniques; the chapter arrangement is well-organized, and the form is novel, which is concise and intuitive; for every technique, great attention is paid to standardize the manipulation procedure and clarify the technique key, simultaneously the safety of acupuncture and moxibustion is also emphasized. The characteristics of the book, including innovativeness, practicability, are highlighted, and it greatly helps to improve students' clinical skills and examination ability.

  12. Standardization of biodosimetry operations

    International Nuclear Information System (INIS)

    Dainiak, Nicholas

    2016-01-01

    Methods and procedures for generating, interpreting and scoring the frequency of dicentric chromosomes vary among cytogenetic biodosimetry laboratories (CBLs). This variation adds to the already considerable lack of precision inherent in the dicentric chromosome assay (DCA). Although variability in sample collection, cell preparation, equipment and dicentric frequency scoring can never be eliminated with certainty, it can be substantially minimized, resulting in reduced scatter and improved precision. Use of standard operating procedures and technician exchange may help to mitigate variation. Although the development and adoption of international standards (ISO 21243 and ISO 19238) has helped to reduce variation in standard operating procedures (SOPs), all CBLs must maintain process improvement, and those with challenges may require additional assistance. Sources of variation that may not be readily apparent in the SOPs for sample collection and processing include variability in ambient laboratory conditions, media, serum lot and quantity and the use of particular combinations of cytokines. Variability in maintenance and calibration of metafer equipment, and in scoring criteria, reader proficiency and personal factors may need to be addressed. The calibration curve itself is a source of variation that requires control, using the same known-dose samples among CBLs, measurement of central tendency, and generation of common curves with periodic reassessment to detect drifts in dicentric yield. Finally, the dose estimate should be based on common scoring criteria, using of the z-statistic. Although theoretically possible, it is practically impossible to propagate uncertainty over the entire calibration curve due to the many factors contributing to variance. Periodic re-evaluation of the curve is needed by comparison with newly published curves (using statistical analysis of differences) and determining their potential causes. (author)

  13. Accreditation Criteria: Policies, Procedures, and Standards

    Science.gov (United States)

    Accrediting Council for Independent Colleges and Schools, 2010

    2010-01-01

    The Accrediting Council for Independent Colleges and Schools ("ACICS" or "Council") supports the concept that periodic evaluation entered into voluntarily by institutions and their peers enhances the quality of the educational process and demonstrates that self regulation of a profession is superior to outside regulation. This has been the…

  14. Emergency Support Function 15 Standard Operating Procedures

    Science.gov (United States)

    2013-08-01

    offices, and various field offices to coordinate federal messaging.  Outreach materials were translated in 22 languages to ensure information was...effective formats. The function is also responsible for managing the translation of information into languages other than English which have been...of Defense and Deputy Secretary of Defense for public information, internal information, community relations, information training, and audiovisual

  15. MILSTRIP. MILitary, STandard, Requisitioning and Issue Procedures.

    Science.gov (United States)

    1987-05-01

    DTA Asset Support Request submitted for obsolete/inactive NSN which cannot be supported. (Applies to reference (cc) DZG trans- action rejects only...Republic of CV Cayman Islands CJ Chad CD Chile CI China (People’s Republic of) CH Colombia CO Colombia (International Narcotics Control) D5 Comoros CR...Liechtenstein LS Lithuania LH Luxembourg LX Macau MC Madagascar MA Malawi MI Malaysia MF Maldives MV Mali RM Malta MT Martinique MB Mauritania MR Mauritius

  16. Standardization of Code on Dental Procedures

    Science.gov (United States)

    1992-02-13

    such as dental implants . Credit one per patient examined. 0141 6.2 Postmortem Examination or Bite Mark Analysis for Identification. Postmortem dental ... endodontic therapy , or sensitivity testing. 0420 0.8 Oral Mucosal Smear. Credit one per specimen collected for cytological, DNA identification... Endodontic Interim Treatment. Treatment accomplished during the course of root canal therapy . Do not take credit for this code on the first or last

  17. Standard operating procedure for computing pangenome trees

    DEFF Research Database (Denmark)

    Snipen, L.; Ussery, David

    2010-01-01

    We present the pan-genome tree as a tool for visualizing similarities and differences between closely related microbial genomes within a species or genus. Distance between genomes is computed as a weighted relative Manhattan distance based on gene family presence/absence. The weights can be chose...

  18. EML procedures manual

    International Nuclear Information System (INIS)

    Volchok, H.L.; de Planque, G.

    1982-01-01

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

  19. Civil Procedure.

    Science.gov (United States)

    Byer, Robert

    1997-01-01

    Briefly reviews the historical development of civil procedure (the rules that dictate how a civil case can proceed through the courts) and identifies some of its main components. Discusses procedures such as subject matter jurisdiction, personal jurisdiction, venue, discovery, motions practice, pleadings, pretrial conference, and trials. (MJP)

  20. Standard test methods for rockwell hardness of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

  1. Standard test methods for rockwell hardness of metallic materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 These test methods cover the determination of the Rockwell hardness and the Rockwell superficial hardness of metallic materials by the Rockwell indentation hardness principle. This standard provides the requirements for Rockwell hardness machines and the procedures for performing Rockwell hardness tests. 1.2 This standard includes additional requirements in annexes: Verification of Rockwell Hardness Testing Machines Annex A1 Rockwell Hardness Standardizing Machines Annex A2 Standardization of Rockwell Indenters Annex A3 Standardization of Rockwell Hardness Test Blocks Annex A4 Guidelines for Determining the Minimum Thickness of a Test Piece Annex A5 Hardness Value Corrections When Testing on Convex Cylindrical Surfaces Annex A6 1.3 This standard includes nonmandatory information in appendixes which relates to the Rockwell hardness test. List of ASTM Standards Giving Hardness Values Corresponding to Tensile Strength Appendix X1 Examples of Procedures for Determining Rockwell Hardness Uncertainty Appendix X...

  2. Photodigitizing procedures

    Science.gov (United States)

    Kilgore, P. D.; Gottbrath, J. H.

    1984-02-01

    This report documents procedures and programs for efficiently running the Photo Digitizing System at the Naval Biodynamics Laboratory. Procedures have been tested and have been found to be effective. Any future acquisitions of programs or changes to current programs should be incorporated in these procedures. On-going research programs use high speed instrumentation cameras to record the motion of test subjects during biodynamic experiments. The films are digitized and the 3-dimensional motion is reconstructed and analyzed. Experimental research is performed to determine the effects of aircraft crashes, ship motion, vibration, aircraft ejection and parachute opening forces on the health and performance of Navy personnel.

  3. [FADCC in NIHS for prior consultation system of application of food additives].

    Science.gov (United States)

    Akiyama, Hiroshi; Sato, Kyoko

    2015-01-01

    An increasing number of inquiries about application of food additives have been made from businesses in and outside Japan. The Ministry of Health, Labour and Welfare (MHLW) is requested to expedite the procedure for designation and revision of use standards. In June 2014, the MHLW set up a center for consultation on application concerning food additives (Food Additive Designation Consultation Center, FADCC) in the National Institute of Health Sciences, aiming to smoothly and expeditiously handle clerical work for designation or revision of the use standards. FADCC gives advice on how to prepare documents on the information such as physicochemical characteristics, effectiveness, safety, daily intake and use standards, based on actual cases and experience.

  4. Calculation of Five Thermodynamic Molecular Descriptors by Means of a General Computer Algorithm Based on the Group-Additivity Method: Standard Enthalpies of Vaporization, Sublimation and Solvation, and Entropy of Fusion of Ordinary Organic Molecules and Total Phase-Change Entropy of Liquid Crystals.

    Science.gov (United States)

    Naef, Rudolf; Acree, William E

    2017-06-25

    The calculation of the standard enthalpies of vaporization, sublimation and solvation of organic molecules is presented using a common computer algorithm on the basis of a group-additivity method. The same algorithm is also shown to enable the calculation of their entropy of fusion as well as the total phase-change entropy of liquid crystals. The present method is based on the complete breakdown of the molecules into their constituting atoms and their immediate neighbourhood; the respective calculations of the contribution of the atomic groups by means of the Gauss-Seidel fitting method is based on experimental data collected from literature. The feasibility of the calculations for each of the mentioned descriptors was verified by means of a 10-fold cross-validation procedure proving the good to high quality of the predicted values for the three mentioned enthalpies and for the entropy of fusion, whereas the predictive quality for the total phase-change entropy of liquid crystals was poor. The goodness of fit ( Q ²) and the standard deviation (σ) of the cross-validation calculations for the five descriptors was as follows: 0.9641 and 4.56 kJ/mol ( N = 3386 test molecules) for the enthalpy of vaporization, 0.8657 and 11.39 kJ/mol ( N = 1791) for the enthalpy of sublimation, 0.9546 and 4.34 kJ/mol ( N = 373) for the enthalpy of solvation, 0.8727 and 17.93 J/mol/K ( N = 2637) for the entropy of fusion and 0.5804 and 32.79 J/mol/K ( N = 2643) for the total phase-change entropy of liquid crystals. The large discrepancy between the results of the two closely related entropies is discussed in detail. Molecules for which both the standard enthalpies of vaporization and sublimation were calculable, enabled the estimation of their standard enthalpy of fusion by simple subtraction of the former from the latter enthalpy. For 990 of them the experimental enthalpy-of-fusion values are also known, allowing their comparison with predictions, yielding a correlation coefficient R

  5. Oculoplastic procedures

    Science.gov (United States)

    ... procedures may be done on the: Eyelids Eye sockets Eyebrows Cheeks Tear ducts Face or forehead These ... eyes. These lenses help protect your eyes and shield them from the bright lights of the surgical ...

  6. Bioactivity and laundering resistance of five commercially available, factory-treated permethrin-impregnated fabrics for the prevention of mosquito-borne diseases: the need for a standardized testing and licensing procedure.

    Science.gov (United States)

    Faulde, Michael K; Pages, Frederic; Uedelhoven, Waltraud

    2016-04-01

    Personal protective measures against hematophagous vectors constitute the first line of defense against arthropod-borne diseases. In this regard, a major advance has been the development of residual insecticides that can be impregnated into clothing. Currently, however, information on specific treatment procedures, initial insecticide concentrations, arthropod toxicity, residual activity, and laundering resistance is either fragmentary or non-existent, and no World Health Organization Pesticides Evaluation Scheme or other guidelines exist for the standardized testing and licensing of insecticide-treated clothing. The aim of this study was to analyze the insecticide content, contact toxicity, laundering resistance, and residual activity of five commercially available and commonly used permethrin-treated fabrics-Insect Shield, ExOfficio, Sol's Monarch T-shirts, battle dress uniforms (BDUs), and Labonal socks-against vector-competent Aedes aegypti, Anopheles stephensi, and Culex pipiens mosquitoes under laboratory conditions. Prior to laundering, permethrin concentrations ranged from 4300 to 870 mg/m(2) whereas, after 100 defined machine launderings, the remaining permethrin content fell to between 1800 and 20 mg/m(2), a percentage permethrin loss of 58.1 to 98.5 %. The highest 99 % knockdown (KD99) efficacy of permethrin was detected in Ae. aegypti, followed by An. stephensi and Cx. pipiens demonstrating that Ae. aegypti is the most sensitive species and Cx. pipiens the least sensitive. After 100 launderings, the remaining biocidal efficacy differed markedly among the five brands, with KD99 times varying from 38.8 ± 2.9 to >360 min for Ae. aegypti, from 44 ± 3.5 to >360 min for An. stephensi, and from 98 ± 10.6 to >360 min for Cx. pipiens. Overall, the ranking of the residual biocidal efficacies within the five brands tested was as follows: BDU ≈ Labonal > Sol's Monarch > ExOfficio > Insect Shield. When applying German Armed Forces

  7. Technical standards in nuclear area

    International Nuclear Information System (INIS)

    Grimberg, M.

    1978-01-01

    The technical standardization in nuclear area is discussed. Also, the competence of CNEN in standardization pursuit is analysed. Moreover, the process of working up of technical standards is explained; in addition, some kinds of technical standards are discussed. (author) [pt

  8. Adequate procedures for specific exams

    International Nuclear Information System (INIS)

    Staevie, G.L.G.; Gattringer, D.K.; Dal Mas, C.R.; Tessman, M.

    1996-01-01

    Some ideal procedures for specific radiographic exams are briefly presented. The aim is to improve the quality standard, establishing a specific method for each exam in order to decrease films waste and reduce the patient dose exposure

  9. Environmental procedures

    International Nuclear Information System (INIS)

    1992-01-01

    The European Bank has pledged in its Agreement to place environmental management at the forefront of its operations to promote sustainable economic development in central and eastern Europe. The Bank's environmental policy is set out in the document titled, Environmental Management: The Bank's Policy Approach. This document, Environmental Procedures, presents the procedures which the European Bank has adopted to implement this policy approach with respect to its operations. The environmental procedures aim to: ensure that throughout the project approval process, those in positions of responsibility for approving projects are aware of the environmental implications of the project, and can take these into account when making decisions; avoid potential liabilities that could undermine the success of a project for its sponsors and the Bank; ensure that environmental costs are estimated along with other costs and liabilities; and identify opportunities for environmental enhancement associated with projects. The review of environmental aspects of projects is conducted by many Bank staff members throughout the project's life. This document defines the responsibilities of the people and groups involved in implementing the environmental procedures. Annexes contain Environmental Management: The Bank's Policy Approach, examples of environmental documentation for the project file and other ancillary information

  10. Relaxation of Summer Gasoline Volatility Standard for Florida and the Raleigh-Durham-Chapel Hill Area (Triangle Area) and the Greensboro/Winston-Salem/High Point Area (Triad Area) in North Carolina Additional Resources

    Science.gov (United States)

    Federal Registers and fact sheets about EPA approving a request from Florida to relax the federal Reid Vapor Pressure standard applicable to gasoline introduced into commerce in the Miami, Tampa and Jacksonville areas.

  11. Reforming Russian Civil Procedur

    Directory of Open Access Journals (Sweden)

    Dmitry Maleshin

    2016-01-01

    Full Text Available The II Annual Symposium of the journal Herald of Civil Procedure ‘2015: The Civil Procedure 2.0: Reform and Current State’ took place on October 9, 2015, at the Faculty of Law of Kazan (Volga region Federal University.The Symposium is now an established tradition for the University. In 2015 it brought together in Kazan eminent scholars of civil procedure from cities across the whole of Russia: Moscow, St. Petersburg, Saratov, Ekaterinburg, Omsk, Samara, Nizhnekamsk and others. This large-scale event attracted the attention not only of Russian scholars, but also of legal scholars from abroad: Elisabetta Silvestri (Professor, University of Pavia, Italy, William B. Simons (Professor, University of Tartu, Estonia, Jaroslav Turlukovsky (Professor, Warsaw University, Poland, Stuart H. Schultz (Practising Attorney, USA, Irina Izarova (Associate Professor, Taras Shevchenko National University of Kyiv, Ukraine.The opening ceremony of the Symposium began with greetings to all participants and best wishes for productive discussions. Participants were welcomed with remarks by Marat Khairullin, Deputy Chair of the Supreme Court of the Republic of Tatarstan, Radik Ilyasov, Head of the Federal Bailiff Service of the Republic of Tatarstan, and Ildar Tarkhanov, Academic Supervisor at the Faculty of Law. They expressed their appreciation for the great value of the journal Herald of Civil Procedure in the growth of the science of civil procedure and enforcement procedure, and for its contributions to the development of the judicial system of the Russian Federation.In addition to hearing prepared reports and discussing viewpoints on current issues of civil and arbitration procedure, participants attended presentations by representatives from procedural law periodicals in the frame of the Symposium. The Editor-in-Chief of Herald of Civil Procedure, Damir Valeev, and the Commercial Director of the Statut Publishing House (Moscow, Kirill Samoilov, presented new

  12. Electronic Procedures for Medical Operations

    Science.gov (United States)

    2015-01-01

    Electronic procedures are replacing text-based documents for recording the steps in performing medical operations aboard the International Space Station. S&K Aerospace, LLC, has developed a content-based electronic system-based on the Extensible Markup Language (XML) standard-that separates text from formatting standards and tags items contained in procedures so they can be recognized by other electronic systems. For example, to change a standard format, electronic procedures are changed in a single batch process, and the entire body of procedures will have the new format. Procedures can be quickly searched to determine which are affected by software and hardware changes. Similarly, procedures are easily shared with other electronic systems. The system also enables real-time data capture and automatic bookmarking of current procedure steps. In Phase II of the project, S&K Aerospace developed a Procedure Representation Language (PRL) and tools to support the creation and maintenance of electronic procedures for medical operations. The goal is to develop these tools in such a way that new advances can be inserted easily, leading to an eventual medical decision support system.

  13. Radiochemical procedures

    International Nuclear Information System (INIS)

    Lyon, W.S.

    1982-01-01

    The modern counting instrumentation has largely obviated the need for separation processes in the radiochemical analysis but problems in low-level radioactivity measurement, environmental-type analyses, and special situations caused in the last years a renaissance of the need for separation techniques. Most of the radiochemical procedures, based on the classic works of the Manhattan Project chemists of the 1940's, were published in the National Nuclear Energy Series (NNES). Improvements such as new solvent extraction and ion exchange separations have been added to these methods throughout the years. Recently the Los Alamos Group have reissued their collected Radiochemical Procedures containing a short summary and review of basic inorganic chemistry - 'Chemistry of the Elements on the Basis of Electronic Configuration'. (A.L.)

  14. [Intolerance to food additives: an update].

    Science.gov (United States)

    Cardinale, F; Mangini, F; Berardi, M; Sterpeta Loffredo, M; Chinellato, I; Dellino, A; Cristofori, F; Di Domenico, F; Mastrototaro, M F; Cappiello, A; Centoducati, T; Carella, F; Armenio, L

    2008-12-01

    Contrary to common believing, the prevalence of the intolerance to food additives in the general population is rather low. Nowadays many doubts persist with regard both to the pathogenetic mechanisms and to the clinical and diagnostic aspects in this field. Symptoms due to, or exacerbated from, food additives usually involve non-IgE-mediate mechanisms (pseudo-allergic reactions, PAR) and are usually less severe of those induced by food allergy. The most frequent clinical feature of the intolerance to food additives still remains the urticaria-angioedema syndrome, although these substances are really involved only in a minority of patients. Other possible clinical features include anaphylaxis, atopic eczema, behaviour disturbances, asthma and non-allergic rhinitis. The diagnostic approach consists in diary cards, reporting symptoms and food habits, elimination diet and double blinded placebo-controlled oral challenge with suspected additives. However, such procedure still remains poorly standardized and numerous uncertainties persist with regard to optimal conditions for performing and interpret the challenge results. The therapeutic approach consists in the exclusion of foods and products containing the additive involved, and, in patients not compliant to the diet, in treatment with symptomatic drugs.

  15. A screening-corrected additivity rule for the calculation of electron scattering from macro-molecules

    International Nuclear Information System (INIS)

    Blanco, F; Garcia, G

    2009-01-01

    A simplified form of the well-known screening-corrected additivity rule procedure for the calculation of electron-molecule cross sections is proposed for the treatment of some very large macro-molecules. While the comparison of the standard and simplified treatments for a DNA dodecamer reveals very similar results, the new treatment presents some important advantages for large molecules.

  16. Software Development Standard Processes (SDSP)

    Science.gov (United States)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; hide

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  17. Procedimiento experimental, innovador y establecido: Ética y ciencia en la introducción de la tecnología médica Experimental, innovative and standard procedures: Ethics and sciencie in the introduction of medical technology

    Directory of Open Access Journals (Sweden)

    J.M.V. Pons

    2003-10-01

    Full Text Available La frontera que delimita un procedimiento como experimental, innovador o establecido, dentro del proceso médico asistencial, suele ser imprecisa en gran parte de los casos. Aún lo es más en el campo quirúrgico y de los productos implantables que difieren sustancialmente de las intervenciones terapéuticas farmacológicas, que están mucho más reguladas. Sin embargo, tanto ética como científicamente, conviene delimitar al máximo el carácter de las distintas intervenciones médicas que se aplican en sujetos humanos, sin dejar a criterio individual el margen de discreción existente hoy en día, especialmente en la innovación quirúrgica. El examen de forma externa e independiente del cociente beneficio/riesgo de la innovación propuesta ha de permitir transparentar, en la relación médico-paciente, el carácter particular de la técnica, así como los requerimientos éticos y científicos para su evaluación más apropiada.The dividing lines between experimental, innovative and standard medical procedures are frequently blurred in current clinical practice. This is even more true in the fields of surgery and implantable devices. These differ substantially from pharmacological interventions, which are better regulated. However, the character of the various medical interventions applied in human subjects should be ethically and scientifically delimited as clearly as possible. This task cannot be abandoned to personal discretion and criteria, which are currently used, especially in the field of surgical innovation. External and independent review of the risk-benefit ratio of proposed innovations should enable specification of the particular features of a technique in the patient-doctor relationship, as well as the ethical and scientific requirements for more appropriate evaluation.

  18. Dosimetry standards for radiation processing

    International Nuclear Information System (INIS)

    Farrar, H. IV

    1999-01-01

    For irradiation treatments to be reproducible in the laboratory and then in the commercial environment, and for products to have certified absorbed doses, standardized dosimetry techniques are needed. This need is being satisfied by standards being developed by experts from around the world under the auspices of Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). In the time period since it was formed in 1984, the subcommittee has grown to 150 members from 43 countries, representing a broad cross-section of industry, government and university interests. With cooperation from other international organizations, it has taken the combined part-time effort of all these people more than 13 years to complete 24 dosimetry standards. Four are specifically for food irradiation or agricultural applications, but the majority apply to all forms of gamma, x-ray, Bremsstrahlung and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruits, vegetables, meats, spices, processed foods, plastics, inks, medical wastes and paper. An additional 6 standards are under development. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties. Together, this set of standards covers essentially all aspects of dosimetry for radiation processing. The first 20 of these standards have been adopted in their present form by the International Organization of Standardization (ISO), and will be published by ISO in 1999. (author)

  19. Emergency procedure planning to mitigate event progression

    International Nuclear Information System (INIS)

    Post, J.

    1987-01-01

    The emergency procedure guidelines (EPGs) specify actions to control key parameters symptomatically, using every possible system to mitigate event response. When EPGs are implemented as plant-specific emergency operating procedures (EOPs), alternate system instructions are incorporated in addition to standard emergency system instructions. These alternative systems were previously excluded because their event mitigation potential had not been considered. However, pre-planning with the DOP implementation program allows the alternate systems to be available to back up emergency systems if needed, so that if the plant gets to extraordinary or unusual conditions, the operator will have appropriate response instructions and methods. These alternative systems are used to maintain adequate core cooling and decay heat removal, thereby preventing an event from progressing to a severe accident to the maximum extent possible

  20. Juveniles in criminal procedure

    Directory of Open Access Journals (Sweden)

    Lukić Tatjana

    2012-01-01

    Full Text Available Taking into consideration the importance and role of children in modern society, as well as their position, this article has as its focus juveniles in criminal procedure. The existence of a separate juvenile justice system independent of the criminal law applicable to the adult offenders and general criminal procedure, as well as the periodic changes of the dominant approach in theory and practice reflects the ascendancy of different theoretical perspectives in the juvenile justice. In this paper, the authors scrutinize the models of responding to juvenile crime - justice and welfare model - as two models of the greatest importance in the present reaction of the society to the crimes conducted by the youngest delinquents at the beginning of the new century and millennium. Furthermore, the paper deals with a matter of international legal standards which, to a large extent, give shape to the legal framework for juvenile offenders and provide their rights and position in the criminal procedure. The authors refer to the internationally accepted documents on several levels. From the (almost universally accepted multilateral conventions on human rights, through the field of recommendations, rules and guidelines which are obeyed and enforced in practice of the juvenile justice although they are of non-binding nature, via the regional European legislative to the national provisions in a particular number of countries. On all the levels mentioned above the rights of the juveniles are regulated having in mind their possible role in the criminal procedure as a perpetrator of a criminal act, as a victim or as a witness. This paper also analyzes the criminal procedure with respect to juvenile perpetrators of the criminal acts in the Republic of Serbia and compliance of the provisions currently in vigor with the international legal standards contained in the international conventions and other internationally accepted and recognized instruments.

  1. 77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

    Science.gov (United States)

    2012-03-05

    ... Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under the Renewable Fuel Standard Program AGENCY: Environmental Protection Agency (EPA). ACTION: Withdrawal... Renewable Fuel Standard program regulations. Because EPA received adverse comment, we are withdrawing the...

  2. Calibration procedure for a laser triangulation scanner with uncertainty evaluation

    Science.gov (United States)

    Genta, Gianfranco; Minetola, Paolo; Barbato, Giulio

    2016-11-01

    Most of low cost 3D scanning devices that are nowadays available on the market are sold without a user calibration procedure to correct measurement errors related to changes in environmental conditions. In addition, there is no specific international standard defining a procedure to check the performance of a 3D scanner along time. This paper aims at detailing a thorough methodology to calibrate a 3D scanner and assess its measurement uncertainty. The proposed procedure is based on the use of a reference ball plate and applied to a triangulation laser scanner. Experimental results show that the metrological performance of the instrument can be greatly improved by the application of the calibration procedure that corrects systematic errors and reduces the device's measurement uncertainty.

  3. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 3, Appendix A, Draft standard operating procedures and elements: Sampling and Analysis Plan (SAP): Phase 1, Task 4, Field Investigation, Draft

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  4. Results of a prospective clinical study on the diagnostic performance of standard magnetic resonance imaging in comparison to a combination of 3T MRI and additional CT imaging in Kienböck's disease.

    Science.gov (United States)

    Stahl, Stephane; Hentschel, Pascal; Ketelsen, Dominik; Grosse, Ulrich; Held, Manuel; Wahler, Theodora; Syha, Roland; Schaller, Hans-Eberhard; Nikolaou, Konstantin; Grözinger, Gerd

    2017-05-01

    This prospective clinical study examined standard wrist magnetic resonance imaging (MRI) examinations and the incremental value of computed tomography (CT) in the diagnosis of Kienböck's disease (KD) with regard to reliability and precision in the different diagnostic steps during diagnostic work-up. Sixty-four consecutive patients referred between January 2009 and January 2014 with positive initial suspicion of KD according to external standard wrist MRI were prospectively included (step one). Institutional review board approval was obtained. Clinical examination by two handsurgeons were followed by wrist radiographs (step two), ultrathin-section CT, and 3T contrast-enhanced MRI (step three). Final diagnosis was established in a consensus conference involving all examiners and all examinations results available from step three. In 12/64 patients, initial suspicion was discarded at step two and in 34/64 patients, the initial suspicion of KD was finally discarded at step three. The final external MRI positive predictive value was 47%. The most common differential diagnoses at step three were intraosseous cysts (n=15), lunate pseudarthrosis (n=13), and ulnar impaction syndrome (n=5). A correlation between radiograph-based diagnoses (step two) with final diagnosis (step three) showed that initial suspicion of stage I KD had the lowest sensitivity for correct diagnosis (2/11). Technical factors associated with a false positive external MRI KD diagnosis were not found. Standard wrist MRI should be complemented with thin-section CT, and interdisciplinary interpretation of images and clinical data, to increase diagnostic accuracy in patients with suspected KD. Copyright © 2017. Published by Elsevier B.V.

  5. Computing tools for implementing standards for single-case designs.

    Science.gov (United States)

    Chen, Li-Ting; Peng, Chao-Ying Joanne; Chen, Ming-E

    2015-11-01

    In the single-case design (SCD) literature, five sets of standards have been formulated and distinguished: design standards, assessment standards, analysis standards, reporting standards, and research synthesis standards. This article reviews computing tools that can assist researchers and practitioners in meeting the analysis standards recommended by the What Works Clearinghouse: Procedures and Standards Handbook-the WWC standards. These tools consist of specialized web-based calculators or downloadable software for SCD data, and algorithms or programs written in Excel, SAS procedures, SPSS commands/Macros, or the R programming language. We aligned these tools with the WWC standards and evaluated them for accuracy and treatment of missing data, using two published data sets. All tools were tested to be accurate. When missing data were present, most tools either gave an error message or conducted analysis based on the available data. Only one program used a single imputation method. This article concludes with suggestions for an inclusive computing tool or environment, additional research on the treatment of missing data, and reasonable and flexible interpretations of the WWC standards. © The Author(s) 2015.

  6. A case of anti-MDA5-positive rapidly progressive interstitial lung disease in a patient with clinically amyopathic dermatomyositis ameliorated by rituximab, in addition to standard immunosuppressive treatment.

    Science.gov (United States)

    Koichi, Yamaguchi; Aya, Yamaguchi; Megumi, Uchida; Shunichi, Kono; Masafumi, Suzuki; Hiroaki, Masubuchi; Masahiko, Kanbe; Shinsuke, Kitahara; Manabu, Ueno; Kenichiro, Hara; Fumiaki, Aoki; Nozomi, Aoki; Toshitaka, Maeno; Masayoshi, Yamanaka; Chikako, Kishi; Yoshinao, Muro; Tatsuo, Suga; Masahiko, Kurabayashi

    2017-05-01

    Rapidly progressive interstitial lung disease (RP-ILD) in patients with clinically amyopathic dermatomyositis (CADM) associated with antibodies to melanoma differentiation-associated gene5 (MDA5) results in a high mortality rate. We experienced a case of anti-MDA5-positive RP-ILD of CADM which showed a response to rituximab, although there was no significant effect due to standard immunosuppressive treatment. This case suggests that rituximab has the potential to offer an effective agent for the treatment of anti-MDA5-positive RP-ILD of CADM.

  7. Comparison of a standardized procedure with current laboratory practices for the detection of lupus anticoagulant in France. Working Group on Hemostasis of the Société Française de Biologie Clinique.

    Science.gov (United States)

    1993-11-15

    A multicenter study involving 13 laboratories was designed to compare a common procedure for screening lupus anticoagulants (LA) to the different practices currently in use in these laboratories. The common procedure combined 3 phospholipid-dependent assays, including mixing studies and a phospholipid neutralizing test. Due to the heterogeneity of LA expression, an abnormal result in at least one of the tests was sufficient to classify a sample as positive for LA. Consecutive samples referred for LA diagnosis were evaluated in parallel by each participant and the data found using the common procedure were analyzed independently according to mutually agreed cut-offs and criteria for sample classification. Within a period of 3 months, 535 samples were included, of which 147 were judged LA positive, 29 undetermined and 359 negative by the respective laboratories using their current practice. When using the common procedure, 149 plasmas were said to be positive, 38 undetermined and 348 negative. Absolute concordance occurred for 81% of the specimen population and absolute discordance (positive versus negative) for 7%. The level of agreement between the common procedure and the current practices, assessed by kappa indexes, indicated noticeable variations in the rates of detection from laboratory to laboratory. Among the different tests used in the common procedure, regular APTT was the least sensitive (about 50% detection) but none of the other tests alone recognized more than 73% of specimens from the LA positive population. This yield increased to about 90% with any combination of 2 sensitive tests.(ABSTRACT TRUNCATED AT 250 WORDS)

  8. X-Ray Fluorescence Analysis for Barium, Zinc, Calcium and Phosphorus in Oil Additives.

    Science.gov (United States)

    1983-08-01

    above procedures. This paper describes a technique whereby the sample mixture, consisting of additive, alkyd resin and zirconium octoate, is converted...zirconium octoate in white spirit. ++ Alkyd Resin Mixture : Beckosol (50-003) diluted 11 with white spirit (barium, zinc, calcium and phosphorus free...Calibration Standards The appropriate amount of the above additive, (or Conostan concentrate), was diluted with the alkyd resin so that the concentration of

  9. Testing heated flint palaeodose protocols using dose recovery procedures

    International Nuclear Information System (INIS)

    Richter, D.; Temming, H.

    2006-01-01

    Thermoluminescence (TL) dating of materials from archaeological contexts has been shown to be an accurate method when comparisons are made with other chronometric dating methods; however, little has been published on the verification of the measurement protocols used to determine the equivalent dose (palaeodose). Instead of testing TL dating protocols for heated flint using archaeological material with unknown thermal and radiation history, dose recovery tests for three samples of different geological origin are presented. These samples exhibit TL emission in the UV, blue and orange-red wavelengths. In addition to the two multiple aliquot protocols (standard additive-regeneration and normalization) generally used to determine the palaeodose, the single-aliquot-regenerative-dose (SAR) TL and OSL procedure, a 'short' SAR-TL and isothermal luminescence (IT) decay procedures are applied using detection windows limited to these emissions. Accurate dose recovery is obtained for the standard and normalization protocols in the commonly employed detection window (UV-blue), the 'short' SAR in the orange-red window and some IT measurements. While the standard techniques give the most accurate and precise results, detection of the TL and IT orange-red emission in connection with a 'short' SAR protocol also gave accurate and precise results. Such procedures are especially suitable for samples too small for standard multiple aliquot techniques, which require large samples

  10. 49 CFR 192.225 - Welding procedures.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Welding procedures. 192.225 Section 192.225... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192.225 Welding procedures. (a) Welding must be performed by a qualified welder in accordance with welding procedures...

  11. 46 CFR 154.665 - Welding procedures.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Welding procedures. 154.665 Section 154.665 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Construction § 154.665 Welding procedures. Welding procedure tests for cargo tanks for a design temperature...

  12. 22 CFR 305.5 - Procedures.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Procedures. 305.5 Section 305.5 Foreign Relations PEACE CORPS ELIGIBILITY AND STANDARDS FOR PEACE CORPS VOLUNTEER SERVICE § 305.5 Procedures. Procedures for filing, investigating, and determining allegations of discrimination on the basis of race...

  13. Are Self-study Procedural Teaching Methods Effective? A Pilot Study of a Family Medicine Residency Program.

    Science.gov (United States)

    Deffenbacher, Brandy; Langner, Shannon; Khodaee, Morteza

    2017-11-01

    A family medicine residency is a unique training environment where residents are exposed to care in multiple settings, across all ages. Procedures are an integral part of family medicine practice. Family medicine residency (FMR) programs are tasked with the job of teaching these skills at a level of intensity and frequency that allows a resident to achieve competency of such skills. In an environment that is limited by work hour restrictions, self-study teaching methods are one way to ensure all residents receive the fundamental knowledge of how to perform procedures. We developed and evaluated the efficacy of a self-study procedure teaching method and procedure evaluation checklist. A self-study procedure teaching intervention was created, consisting of instructional articles and videos on three procedures. To assess the efficacy of the intervention, and the competency of the residents, pre- and postintervention procedure performance sessions were completed. These sessions were reviewed and scored using a standardized procedure performance checklist. All 24 residents participated in the study. Overall, the resident procedure knowledge increased on two of the three procedures studied, and ability to perform procedure according to expert-validated checklist improved significantly on all procedures. A self-study intervention is a simple but effective way to increase and improve procedure training in a way that fits the complex scheduling needs of a residency training program. In addition, this study demonstrates that the procedure performance checklists are a simple and reliable way to increase assessment of resident procedure performance skills in a residency setting.

  14. Twenty new ISO standards on dosimetry for radiation processing

    International Nuclear Information System (INIS)

    Farrar IV, H.

    2000-01-01

    Twenty standards on essentially all aspects of dosimetry for radiation processing were published as new ISO standards in December 1998. The standards are based on 20 standard practices and guides developed over the past 14 years by Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). The transformation to ISO standards using the 'fast track' process under ISO Technical Committee 85 (ISO/TC85) commenced in 1995 and resulted in some overlap of technical information between three of the new standards and the existing ISO Standard 11137 Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization. Although the technical information in these four standards was consistent, compromise wording in the scopes of the three new ISO standards to establish precedence for use were adopted. Two of the new ISO standards are specifically for food irradiation applications, but the majority apply to all forms of gamma, X-ray, and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruit, vegetables, meats, spices, processed foods, plastics, inks, medical wastes, and paper. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties using the new ISO Type A and Type B evaluations. Unfortunately, nine of the 20 standards just adopted by the ISO are not the most recent versions of these standards and are therefore already out of date. To help solve this problem, efforts are being made to develop procedures to coordinate the ASTM and ISO development and revision processes for these and future ASTM-originating dosimetry standards. In the meantime, an additional four dosimetry standards have recently been published by the ASTM but have

  15. Robust procedures in chemometrics

    DEFF Research Database (Denmark)

    Kotwa, Ewelina

    -way chemometrical methods, such as PCA and PARAFAC models for analysing spatial and depth profiles of sea water samples, defined by three data modes: depth, variables and geographical location. Emphasis was also put on predicting fluorescence values, as being a natural measure of biological activity, by applying...... if contamination in the data is present. For this becoming a standard procedure, further work is required, aiming at implementing reliable robust algorithms into standard statistical programs.......The general aim of the thesis was to contribute to the improvement of data analytical techniques within the chemometric field. Regardless the multivariate structure of the data, it is still common in some fields to perform uni-variate data analysis using only simple statistics such as sample mean...

  16. INEL test reactor facility alarms: descriptions, technical specifications, and modification procedure

    International Nuclear Information System (INIS)

    Potash, L.M.; Boone, M.P.

    1980-04-01

    This report identifies standards, procedures, and practices which will affect any attempt to integrate or introduce human engineering principles into nuclear power plant alarm systems. Additional information concerning type of signal used, expected reaction, type of sensor, etc., is presented because of its relevance to future work on alarm system integration. The INEL test reactors were studied. Interviews were conducted with operators, designers, and management personnel. Additional information was obtained from available documentation. Only fire-alarm systems, and to a lesser extent, criticality alarms, have detailed industry-wide standards. One general standard has been written for control-room annunciators

  17. Road safety audit tools, procedures, and experiences : a literature review and recommendations : research in the framework of the European research project Safety Standards for Road Design and Redesign SAFESTAR, Workpackage 8.

    NARCIS (Netherlands)

    Kooi, R.M. van der

    1999-01-01

    This report describes tools and procedures established in different countries which apply Road Safety Audits (RSA). These RSAs are utilized to identify potential safety problems and they concentrate on safety measures to overcome these problems. This technique is used to detect possible safety

  18. Procedures Manual: A Guide to Uniform Grant and Contract Management Standards and The Common Rule for Uniform Administrative Requirements for Grants and Cooperative Agreements to State and Local Governments.

    Science.gov (United States)

    Conable, Sharon R.

    This manual has been compiled to provide consistent grant application and administrative procedures for state agencies which award grants or contracts to local governments. It provides a conceptual framework of information concerning the reporting, financial, contractual, and auditing requirements for recipients of Texas State Library grants…

  19. Proposed Rule and Related Materials for Control of Emissions of Air Pollution From Nonroad Diesel Engines Control of Air Pollution From Aircraft and Aircraft Engines; Proposed Emission Standards and Test Procedures

    Science.gov (United States)

    EPA is proposing to adopt emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

  20. Standard NIM instrumentation system

    CERN Document Server

    1990-01-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID- 20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  1. Beyond the standard model

    International Nuclear Information System (INIS)

    Cuypers, F.

    1997-05-01

    These lecture notes are intended as a pedagogical introduction to several popular extensions of the standard model of strong and electroweak interactions. The topics include the Higgs sector, the left-right symmetric model, grand unification and supersymmetry. Phenomenological consequences and search procedures are emphasized. (author) figs., tabs., 18 refs

  2. A Proposal Comparing a Clinician-Guided Patient Information Module to Standard Patient Information Evaluating Treatment Expectations of Dermal Fillers

    Science.gov (United States)

    Warren, Hermine

    2014-01-01

    In 2011, nearly 13 million nonsurgical cosmetic procedures were performed, representing a 6% increase from the previous year. Patients often present with unrealistic treatment expectations based on beauty industry standards and misinformation. In addition, due to the lack of competency standardization in this area, providers frequently deliver…

  3. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1993-01-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes

  4. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  5. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  6. Development of FWD procedures manual.

    Science.gov (United States)

    2010-04-01

    In this project, the state-of-practice in FWD testing and analysis procedures were examined : by looking at the standard protocols of a number of other highway agencies. The specific : needs of NJDOT were also examined and a protocol was developed th...

  7. Digital forensic standards: international progress

    CSIR Research Space (South Africa)

    Grobler, MM

    2010-05-01

    Full Text Available With the explosion of digital crime, digital forensics is more often applied. The digital forensic discipline developed rather rapidly, but up to date very little international standardization with regard to processes, procedures or management has...

  8. Use of Low-Fidelity Simulation Laboratory Training for Teaching Radiology Residents CT-Guided Procedures.

    Science.gov (United States)

    Picard, Melissa; Nelson, Rachel; Roebel, John; Collins, Heather; Anderson, M Bret

    2016-11-01

    To determine the benefit of the addition of low-fidelity simulation-based training to the standard didactic-based training in teaching radiology residents common CT-guided procedures. This was a prospective study involving 24 radiology residents across all years in a university program. All residents underwent standard didactic lecture followed by low-fidelity simulation-based training on three common CT-guided procedures: random liver biopsy, lung nodule biopsy, and drain placement. Baseline knowledge, confidence, and performance assessments were obtained after the didactic session and before the simulation training session. Approximately 2 months later, all residents participated in a simulation-based training session covering all three of these procedures. Knowledge, confidence, and performance data were obtained afterward. These assessments covered topics related to preprocedure workup, intraprocedure steps, and postprocedure management. Knowledge data were collected based on a 15-question assessment. Confidence data were obtained based on a 5-point Likert-like scale. Performance data were obtained based on successful completion of predefined critical steps. There was significant improvement in knowledge (P = .005), confidence (P training to the standard didactic curriculum for all procedures. This study suggests that the addition of low-fidelity simulation-based training to a standard didactic-based curriculum is beneficial in improving resident knowledge, confidence, and tested performance of common CT-guided procedures. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  9. Hypnosis for Acute Procedural Pain: A Critical Review.

    Science.gov (United States)

    Kendrick, Cassie; Sliwinski, Jim; Yu, Yimin; Johnson, Aimee; Fisher, William; Kekecs, Zoltán; Elkins, Gary

    2016-01-01

    Clinical evidence for the effectiveness of hypnosis in the treatment of acute procedural pain was critically evaluated based on reports from randomized controlled clinical trials (RCTs). Results from the 29 RCTs meeting inclusion criteria suggest that hypnosis decreases pain compared to standard care and attention control groups and that it is at least as effective as comparable adjunct psychological or behavioral therapies. In addition, applying hypnosis in multiple sessions prior to the day of the procedure produced the highest percentage of significant results. Hypnosis was most effective in minor surgical procedures. However, interpretations are limited by considerable risk of bias. Further studies using minimally effective control conditions and systematic control of intervention dose and timing are required to strengthen conclusions.

  10. HYPNOSIS FOR ACUTE PROCEDURAL PAIN: A Critical Review

    Science.gov (United States)

    Kendrick, Cassie; Sliwinski, Jim; Yu, Yimin; Johnson, Aimee; Fisher, William; Kekecs, Zoltán; Elkins, Gary

    2015-01-01

    Clinical evidence for the effectiveness of hypnosis in the treatment of acute, procedural pain was critically evaluated based on reports from randomized controlled clinical trials (RCTs). Results from the 29 RCTs meeting inclusion criteria suggest that hypnosis decreases pain compared to standard care and attention control groups and that it is at least as effective as comparable adjunct psychological or behavioral therapies. In addition, applying hypnosis in multiple sessions prior to the day of the procedure produced the highest percentage of significant results. Hypnosis was most effective in minor surgical procedures. However, interpretations are limited by considerable risk of bias. Further studies using minimally effective control conditions and systematic control of intervention dose and timing are required to strengthen conclusions. PMID:26599994

  11. Additive Manufactured Superconducting Cavities

    Science.gov (United States)

    Holland, Eric; Rosen, Yaniv; Woolleet, Nathan; Materise, Nicholas; Voisin, Thomas; Wang, Morris; Mireles, Jorge; Carosi, Gianpaolo; Dubois, Jonathan

    Superconducting radio frequency cavities provide an ultra-low dissipative environment, which has enabled fundamental investigations in quantum mechanics, materials properties, and the search for new particles in and beyond the standard model. However, resonator designs are constrained by limitations in conventional machining techniques. For example, current through a seam is a limiting factor in performance for many waveguide cavities. Development of highly reproducible methods for metallic parts through additive manufacturing, referred to colloquially as 3D printing\\x9D, opens the possibility for novel cavity designs which cannot be implemented through conventional methods. We present preliminary investigations of superconducting cavities made through a selective laser melting process, which compacts a granular powder via a high-power laser according to a digitally defined geometry. Initial work suggests that assuming a loss model and numerically optimizing a geometry to minimize dissipation results in modest improvements in device performance. Furthermore, a subset of titanium alloys, particularly, a titanium, aluminum, vanadium alloy (Ti - 6Al - 4V) exhibits properties indicative of a high kinetic inductance material. This work is supported by LDRD 16-SI-004.

  12. Uranium hexafluoride: Handling procedures and container descriptions

    International Nuclear Information System (INIS)

    1987-09-01

    The US Department of Energy (DOE) guidelines for packaging, measuring, and transferring uranium hexafluoride (UF 6 ) have been undergoing continual review and revision for several years to keep them in phase with developing agreements for the supply of enriched uranium. Initially, K-1323 ''A Brief Guide to UF 6 Handling,'' was issued in 1957. This was superceded by ORO-651, first issued in 1966, and reissued in 1967 to make editorial changes and to provide minor revisions in procedural information. In 1968 and 1972, Revisions 2 and 3, respectively, were issued as part of the continuing effort to present updated information. Revision 4 issued in 1977 included revisions to UF 6 cylinders, valves, and methods to use. Revision 5 adds information dealing with pigtails, overfilled cylinders, definitions and handling precautions, and cylinder heel reduction procedures. Weighing standards previously presented in ORO-671, Vol. 1 (Procedures for Handling and Analysis of UF 6 ) have also been included. This revision, therefore, supercedes ORO-671-1 as well as all prior issues of this report. These guidelines will normally apply in all transactions involving receipt or shipment of UF 6 by DOE, unless stipulated otherwise by contracts or agreements with DOE or by notices published in the Federal Register. Any questions or requests for additional information on the subject matter covered herein should be directed to the United States Department of Energy, P.O. Box E, Oak Ridge, Tennessee 37831, Attention: Director, Uranium Enrichment Operations Division. 33 figs., 12 tabs

  13. Dispersant field monitoring procedures

    International Nuclear Information System (INIS)

    Hillman, S. O.; Hood, S. D.; Bronson, M. T.; Shufelt, G.

    1997-01-01

    Alyeska Pipeline Service Company's (APSC) dispersant response capability in the Port of Valdez, Prince William Sound, and in the Gulf of Alaska was described. APSC provides dispersal equipment, aerial spray delivery systems, helibucket delivery systems, vessel delivery systems, along with a minimum of 600,000 gallon stockpile of the dispersant Corexit 9527. Effectiveness and effects are monitored by visual observation. In addition, fluorometer and water sample analysis are also used to provide field analytical data indicative of the environmental effects of dispersant applications. The field monitoring plan was field tested in December 1996. Details of the monitoring procedures are outlined in this paper. 18 refs., 5 tabs

  14. Accounting standards

    NARCIS (Netherlands)

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed

  15. ISP-27 OECD/NEA/CSNI International Standard Problem n.27. Bethsy experiment 9.1 B. 2. cold leg break without HPSI and with delayed ultimate procedure. Comparison report. Volume 1 + 2

    International Nuclear Information System (INIS)

    1992-11-01

    This report is the final comparison report for ISP-27, a blind problem which is based on the BETHSY test 9.1b performed in december 1989 at the Nuclear Research Center in Grenoble (France). The BETHSY integral test facility is a scaled down model of a 3 loop 900 e MW FRAMATOME PWR; the overall scaling factor applied to every volume, mass flowrate and power level is close to 1/100, while elevations are 1/1 in order to preserve the gravitational heads. The cold leg break is combined with the High Pressure Injection System (HPIS) failure. In that case, the state oriented approach requires operators to start an Ultimate Procedure, which consists in fully opening the Steam Generator (SG) atmospheric dumps as soon as they are informed of the unavailability of the HPIS. The presently studied scenario assumes a delayed application of this procedure, which is started only when the core outlet temperature rises significantly higher than the saturation temperature. The BETHSY Test 9.1b addresses, besides typical problems relevant to Small Break Loss Of Coolant Accidents (SBLOCA) such as critical 2-phase flow, loop seal clearing, heat-transfer during boil-off or accumulator injection, specific aspects related to the fast depressurization (primary to secondary and structural heat transfer), uncovered core behavior when intense condensation takes place in the SG, and primary side refilling by the Low Pressure Injection System (LPIS)

  16. Comparison between the standard SPM2 template and Korean-standard template in FDG-PET

    International Nuclear Information System (INIS)

    Kim, Jung Hee; Lee, Byeong Il; Song, Ho Chun; Min, Jung Joon; Bom, Hee Seung; Lee, Jae Sung

    2005-01-01

    The preprocessing step of statistical parametric mapping (SPM) requires the procedure of spatial normalization that consists of applying the nonlinear deformations needed to force every particular PET scan to match a reference template. The purpose of this study is to asses the statistic influence of using 2 different templates (the standard SPM2-PET template and Korean-standard PET template) in the normalization. We compared the regional metabolic patterns on 18F-FDG (fluorodeoxyglucose) images obtained from 4 patients with Alzheimers disease (AD) and 16 normal subjects. The statistical outcome of between- group comparison was analyzed with SPM2 and was applied into two levels of thresholds (an uncorrected P value of P <0.001, a corrected P value of P < 0.05). As a result, the most significant hypometabolic region was commonly found in the left temporal gyrus regardless of template type or thresholds. However, inconsistent results including different extent and the t-score statistics representing metabolic changes could be also observed between two templates. While the standard SPM2 template showed hypometabolic regions corresponding to Brodman area (BA) 7 and 9, Korean-standard template was not observed these regions. In addition, hypometabolic regions corresponding to BA 38 and 46 indicated not the standard SPM2 template but Korean-standard template. Statistic result showed that the standard SPM2 template effectively reflects the dorsal region of the brain while Korean-standard template is more sensitive to the medial region of the brain

  17. European wind turbine standards 2 (EWTS-2)

    Energy Technology Data Exchange (ETDEWEB)

    Pierik, J.T.G.; Dekker, J.W.M.; Braam, H. [and others

    1999-03-01

    A summary is given of the main results of the European Wind Turbine Standards II project. EWTS-II was completed in 1998 and included investigations on: 1) wind farms-wind field and turbine loading; 2) complex terrain and fatigue loading; 3) extreme wind conditions; 4) quantification of failure probabilities; 5) integration of blade tests in design; 6) power performance in complex terrain; 7) site evaluation. In addition to these scientific evaluations, the EWTS-II participants established an organization of qualified measuring institute in the field of wind energy, the MEASNET organization. MEASNET unified measurement procedures of the participating institutes and guarantees qualified measurements and mutual acceptance among its members. (LN)

  18. Review Reviewing the values of a stabdard operating procedure ...

    African Journals Online (AJOL)

    The review further discusses shortcomings related to nonexistence of standard operating procedure including inconsistent quality of service; performance variation; procedural mix-ups; and misinterpretation or miscommunication of information. In conclusion, standard operating procedure, if realized and materialized as a ...

  19. Renewable Fuel Standard (RFS2): Program Amendments Additional Resources

    Science.gov (United States)

    The final rule amends the RFS2 regulations of 40 CFR Part 80 Subpart M to correct regulatory language that was inconsistent or that inadvertently misrepresented EPA’s intent as reflected in the preamble to the final RFS2 regulations.

  20. Crown lengthening procedures

    Directory of Open Access Journals (Sweden)

    AA. Khoshkhonejad

    1994-06-01

    Full Text Available Nowadays, due to recent developments and researches in dental science, it is possible to preserve and restore previously extracted cases such as teeth with extensive caries, fractured or less appropriate cases for crown coverage as well as teeth with external perforation caused by restorative pins. In order to restore the teeth with preservation of periodontium, we should know thoroughly physiological aspects of periodontium and protection of Biologic Width which is formed by epithelial and supracrestal connective tissue connections. Considering biologic width is one of the principal rules of teeth restoration, otherwise we may destruct periodontal tissues. Several factors are involved in placing a restoration and one of the most important ones is where the restoration margin is terminated. Many studies have been conducted on the possible effects of restoration margin on the gingiva and due to the results of these studies it was concluded that restoration margin should be finished supragingivally. However, when we have to end the restoration under Gingival Crest, First a healthy gingival sulcus is required. Also, we should not invade the biological width. Since a normal biologic with is reported 2 mm and sound tooth tissue should be placed at least 2 mm coronal to the epithelial tissue, the distance between sound tooth tissue and crown margin should be at least 4mm. Thus, performing crown lengthening is essential to increase the clinical crown length. Basically, two objectives are considered: 1 restorative 2 esthetic (gummy smile Surgical procedure includes gingivectomy and flap procedure. Orthodontic procedure involves orthodontic extrusion or force eruption technique which is controlled vertical movements of teeth into occlusion. Besides, this procedure can also used to extrude teeth defects from the gingival tissue. By crown lengthening, tooth extraction is not required and furthermore, adjacent teeth preparation for placing a fixed

  1. Standard review plan on antitrust reviews. Final report

    International Nuclear Information System (INIS)

    Lambe, W.M.; Davis, M.J.

    1997-12-01

    This standard review plan describes the procedures used by NRC staff to implement the antitrust review and enforcement provisions in Sections 105 and 186 of the Atomic Energy Act of 1954, as amended (the Act), and replaces NUREG-0970. These procedures are principally derived from the Commission's Rules and Regulations in 10 CFR Sections 2.101, 2.102, Part 2-Appendix A, Section X, 50.33a, 50.80, 50.90, and 52.77. These procedures set forth the steps and criteria the staff uses in antitrust reviews of construction permit applications, operating license applications, combined construction permit/operating license applications, combined construction permit/operating license applications, and applications for approval of the transfer of construction permits, operating licenses, and combined licenses. In addition, the procedures describe how the staff enforces compliance with antitrust conditions appended to licenses

  2. Microstructure and properties of gravity sintered 316l stainless steel powder with nickel boride addition

    Directory of Open Access Journals (Sweden)

    Božić Dušan

    2016-01-01

    Full Text Available The present work demonstrates a procedure for synthesis of stainless steel powder by gravity sintering method. As an additive to the basic powder, NiB powder was added in the amount of 0.2 - 1.0 wt.%. Gravity sintering was done in vacuum, at the temperatures of 1100°C-1250°C, in the course of 3 - 60 min, using ceramic mould. Structural characterization was conducted by XRD, and microstructural analysis by optical and scanning electron microscope (SEM. Mechanical properties were investigated by tensile tests with steel rings. Density and permeability were determined by standard techniques for porous samples. Gravity sintered stainless steel with NiB addition had more superior mechanical and physico-chemical properties compared to stainless steel obtained by standard powder metallurgy procedures - pressing and sintering. [Projekat Ministarstva nauke Republike Srbije, br. 172005

  3. Standardized quality audit procedures for on-site dosimetry visits to radiotherapy hospitals. Report of the IAEA consultants' meeting, IAEA, Vienna, 27 September - 1 October 1999; revised in 2001

    International Nuclear Information System (INIS)

    Izewska, Joanna; Dutreix, A.; Followill, D.S.; Nisbet, A.; Novotny, J.; Sipila, P.; Dam, J. van

    2002-01-01

    Since 1969 the International Atomic Energy Agency (IAEA), together with the World Health Organization (WHO), has performed postal TLD audits to verify the calibration of radiotherapy beams in developing countries. The IAEA over the past 30 years, has verified the calibration of more than 3500 clinical photon beams at approximately 1000 radiotherapy hospitals. Detailed follow-up procedures have been implemented since 1996. When the TLD result of a participating institution falls outside the acceptance limits of ±5%, the institution is initially informed that there is a discrepancy and requested to try to identify the reasons why it occurred. The institution is not informed of the actual magnitude of the discrepancy (blind conditions) but is offered a second TLD audit. If the deviation cannot be resolved by the local radiotherapy institution or the national SSDL, then an on-site visit is suggested which, if accepted, is made by an IAEA expert in clinical dosimetry. The on-site visit includes a review of the dosimetry data and techniques, corrective measurements and ad-hoc training. The reasons for the discrepancy are then traced, explained, corrected and reported. Until the discrepancies are resolved and changes have been implemented by hospitals to ensure that the discrepancies do not reoccur, the safe and effective delivery of radiation doses to patients is questionable. This document provides a standardised set of procedures for resolving discrepancies during onsite visits to radiotherapy hospitals by the IAEA experts. The table below summarises the acceptance criteria to be used by the IAEA experts for dosimetry and mechanical parameters of the hospital treatment units. If some of the parameters are outside the acceptance criterion, it will not be possible for an institution to assure the adequate quality of the dosimetry practices in radiotherapy. The criteria are based on analyses of clinical data and the measurement uncertainties for various dosimetry and

  4. Communications standards

    CERN Document Server

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se

  5. Patient doses in interventional cardiology procedures

    International Nuclear Information System (INIS)

    Domienik, J.; Papierz, S.; Jankowski, J.; Peruga, J.Z.

    2008-01-01

    In most countries of European Union legislation requires the determination of the total skin dose to patient resulting from interventional procedures to assess the risk of deterministic effect. To this end, various dose indicators like dose area product (DAP), cumulative dose (CD) and entrance dose at the patient plane (EFD) are used in clinical practice. The study aims at relating those dose indicators with doses ascribe to the most irradiated areas of the patient skin usually expressed in terms of local maximal skin dose (MSD). For the study the local MSD and related to their areas are investigated and compared for coronary angiography CA and intervention (PCI). Two methods implying radiographic films Kodak EDR2 and matrixes of thermoluminescent dosimeters (TLDs) are applied for direct measurements of dose distribution for selected procedures. Both methods are compared. Additionally, for patient dosimetry the following data: MSD, CD, EFD, fluoroscopy time (FT), number of acquired images, total DAP, fluoro-DAP and record-DAP were collected for randomly selected procedure. The statistical quantities like: median, 3 rd quartile, mean and standard deviation for all dosimetric parameters are determined. Preliminary study showed that the values of data collected for coronary procedures are in the ranges 0,7 - 27,3 min for fluoroscopy time, 50 - 350 Gy cm 2 for total DAP, 300 - 2000 mGy for CD, 140 - 2000 mGy for EFD and 100 - 1500 mGy for local maximal skin dose. For interventions the ranges are, accordingly 3,0 - 43,6 min , 25 - 450 Gy cm 2 , 270 - 6600 mGy, 80 - 2600 mGy and 80 - 1500 mGy. As a result of the study the correlations between dose indicators and local MSD are analyzed. The concentration of dose on irradiated films are going to be investigated in some detail as well. (author)

  6. Intensive care unit audit: invasive procedure surveillance

    Directory of Open Access Journals (Sweden)

    Mariama Amaral Michels

    2013-01-01

    Full Text Available Rationale and objective: currently, Healthcare-associated Infections (HAIs constitute a serious public health problem. It is estimated that for every ten hospitalized patients, one will have infection after admission, generating high costs resulting from increased length of hospitalization, additional diagnostic and therapeutic interventions. The intensive care unit (ICU, due to its characteristics, is one of the most complex units of the hospital environment, a result of the equipment, the available technology, the severity of inpatients and the invasive procedures the latter are submitted to. The aim of the study was to evaluate the adherence to specifi c HAI prevention measures in invasive ICU procedures. Methods: This study had a quantitative, descriptive and exploratory approach. Among the risk factors for HAIs are the presence of central venous access, indwelling vesical catheter and mechanical ventilation, and, therefore, the indicators were calculated for patients undergoing these invasive procedures, through a questionnaire standardized by the Hospital Infection Control Commission (HICC. Results: For every 1,000 patients, 15 had catheter-related bloodstream infection, 6.85 had urinary tract infection associated with indwelling catheter in the fi rst half of 2010. Conclusion: most HAIs cannot be prevented, for reasons inherent to invasive procedures and the patients. However, their incidence can be reduced and controlled. The implementation of preventive measures based on scientifi c evidence can reduce HAIs signifi cantly and sustainably, resulting in safer health care services and reduced costs. The main means of prevention include the cleaning of hands, use of epidemiological block measures, when necessary, and specifi c care for each infection site. KEYWORDS Nosocomial infection. Intensive care units.

  7. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1987-05-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes

  8. 5 CFR 179.308 - Accelerated procedures.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Accelerated procedures. 179.308 Section 179.308 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.308 Accelerated procedures. OPM may make an administrative...

  9. 5 CFR 179.304 - Notification procedures.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Notification procedures. 179.304 Section 179.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.304 Notification procedures. Before collecting any debt...

  10. 40 CFR 140.5 - Analytical procedures.

    Science.gov (United States)

    2010-07-01

    ... 140.5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) MARINE SANITATION DEVICE STANDARD § 140.5 Analytical procedures. In determining the composition and quality of effluent discharge from marine sanitation devices, the procedures contained in 40 CFR part 136...

  11. Comparison of transition-matrix sampling procedures

    DEFF Research Database (Denmark)

    Yevick, D.; Reimer, M.; Tromborg, Bjarne

    2009-01-01

    We compare the accuracy of the multicanonical procedure with that of transition-matrix models of static and dynamic communication system properties incorporating different acceptance rules. We find that for appropriate ranges of the underlying numerical parameters, algorithmically simple yet high...... accurate procedures can be employed in place of the standard multicanonical sampling algorithm....

  12. Antimicrobial Testing Methods & Procedures Developed by EPA's Microbiology Laboratory

    Science.gov (United States)

    We develop antimicrobial testing methods and standard operating procedures to measure the effectiveness of hard surface disinfectants against a variety of microorganisms. Find methods and procedures for antimicrobial testing.

  13. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2016-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has......International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...... to be harmonized in order for a global company to perceive e-Customs as standardized. In doing so, they contribute an explanation of the challenges associated with using a standardization mechanism for harmonizing socio-technical information systems....

  14. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2014-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has......International e-Customs is going through a standardization process. Driven by the need to increase control in the trade process to address security challenges stemming from threats of terrorists, diseases, and counterfeit products, and to lower the administrative burdens on traders to stay...... to be harmonized in order for a global company to perceive e-Customs as standardized. In doing so, they contribute an explanation of the challenges associated with using a standardization mechanism for harmonizing socio-technical information systems....

  15. Training Standardization

    International Nuclear Information System (INIS)

    Agnihotri, Newal

    2003-01-01

    The article describes the benefits of and required process and recommendations for implementing the standardization of training in the nuclear power industry in the United States and abroad. Current Information and Communication Technologies (ICT) enable training standardization in the nuclear power industry. The delivery of training through the Internet, Intranet and video over IP will facilitate this standardization and bring multiple benefits to the nuclear power industry worldwide. As the amount of available qualified and experienced professionals decreases because of retirements and fewer nuclear engineering institutions, standardized training will help increase the number of available professionals in the industry. Technology will make it possible to use the experience of retired professionals who may be interested in working part-time from a remote location. Well-planned standardized training will prevent a fragmented approach among utilities, and it will save the industry considerable resources in the long run. It will also ensure cost-effective and safe nuclear power plant operation

  16. Additive manufacturing of tunable lenses

    Science.gov (United States)

    Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

    2017-02-01

    Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

  17. SAFE-P: System for Assurance of Flight Executable Procedures, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA operates manned spacecraft according to rigorously-defined standard operating procedures. Unfortunately, operating procedures are often written in different...

  18. Pollutant Assessments Group Procedures Manual: Volume 1, Administrative and support procedures

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This manual describes procedures currently in use by the Pollutant Assessments Group. The manual is divided into two volumes: Volume 1 includes administrative and support procedures, and Volume 2 includes technical procedures. These procedures are revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy. Format inconsistencies will be corrected in subsequent revisions of individual procedures. The purpose of the Pollutant Assessments Groups Procedures Manual is to provide a standardized set of procedures documenting in an auditable manner the activities performed by the Pollutant Assessments Group (PAG) of the Health and Safety Research Division (HASRD) of the Environmental Measurements and Applications Section (EMAS) at Oak Ridge National Laboratory (ORNL). The Procedures Manual ensures that the organizational, administrative, and technical activities of PAG conform properly to protocol outlined by funding organizations. This manual also ensures that the techniques and procedures used by PAG and other contractor personnel meet the requirements of applicable governmental, scientific, and industrial standards. The Procedures Manual is sufficiently comprehensive for use by PAG and contractor personnel in the planning, performance, and reporting of project activities and measurements. The Procedures Manual provides procedures for conducting field measurements and includes program planning, equipment operation, and quality assurance elements. Successive revisions of this manual will be archived in the PAG Document Control Department to facilitate tracking of the development of specific procedures.

  19. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  20. Radiological Control Technician: Standardized technician Qualification Standard

    International Nuclear Information System (INIS)

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  1. Additional palatal implants for refractory snoring.

    Science.gov (United States)

    Catalano, Peter; Goh, Yao Hong; Romanow, John

    2007-07-01

    To evaluate safety and efficacy of additional palatal implants for snoring treatment. A prospective case series at two clinical sites in an office setting. Patients who did not have an acceptable reduction in snoring intensity after an initial 3 implant procedure received additional implants. Bed partners rated snoring intensity on a 10 cm visual analog scale (VAS) at baseline and 90 days postprocedure. Snoring intensity VAS decreased significantly from 6.4 +/- 2.3 to 4.6 +/- 2.9 (P < 0.01) for patients who received an additional fourth implant, and to 4.1 +/- 2.8 after the 5th implant (P<0.01). Epworth sleepiness scale scores also decreased significantly for patients who received additional fourth or fifth implants. There were no adverse events. Additional palatal implants for snoring treatment were safe and effective in this case series. Additional implants may offer relief for snorers not responding to the initial 3 implant procedure.

  2. Image-guided transorbital procedures with endoscopic video augmentation.

    Science.gov (United States)

    DeLisi, Michael P; Mawn, Louise A; Galloway, Robert L

    2014-09-01

    Surgical interventions to the orbital space behind the eyeball are limited to highly invasive procedures due to the confined nature of the region along with the presence of several intricate soft tissue structures. A minimally invasive approach to orbital surgery would enable several therapeutic options, particularly new treatment protocols for optic neuropathies such as glaucoma. The authors have developed an image-guided system for the purpose of navigating a thin flexible endoscope to a specified target region behind the eyeball. Navigation within the orbit is particularly challenging despite its small volume, as the presence of fat tissue occludes the endoscopic visual field while the surgeon must constantly be aware of optic nerve position. This research investigates the impact of endoscopic video augmentation to targeted image-guided navigation in a series of anthropomorphic phantom experiments. A group of 16 surgeons performed a target identification task within the orbits of four skull phantoms. The task consisted of identifying the correct target, indicated by the augmented video and the preoperative imaging frames, out of four possibilities. For each skull, one orbital intervention was performed with video augmentation, while the other was done with the standard image guidance technique, in random order. The authors measured a target identification accuracy of 95.3% and 85.9% for the augmented and standard cases, respectively, with statistically significant improvement in procedure time (Z=-2.044, p=0.041) and intraoperator mean procedure time (Z=2.456, p=0.014) when augmentation was used. Improvements in both target identification accuracy and interventional procedure time suggest that endoscopic video augmentation provides valuable additional orientation and trajectory information in an image-guided procedure. Utilization of video augmentation in transorbital interventions could further minimize complication risk and enhance surgeon comfort and

  3. Standardization of a rearing procedure of Tetranychus urticae Koch (Acari: Tetranychidae) on bean (Phaseolus vulgaris): plant age and harvest time; Padronizacao da criacao de Tetranychus urticae Koch (Acari: Tetranychidae) em feijoeiro (Phaseolus vulgaris): idade da planta e tempo de colheita

    Energy Technology Data Exchange (ETDEWEB)

    Bustos, Alexander; Cantor, Fernando; Cure, Jose R; Rodriguez, Daniel [Universidade Militar Nueva Granada, Bogota (Colombia). Facutad de Ciencias. Programa de Biologia Aplicada], e-mail: fernando.cantor@unimilitar.edu.co

    2009-09-15

    A rearing technique was standardized to produce Tetranychus urticae Koch on Phaseolus vulgaris (ICA Cerinza variety) as a prey of the predatory mite Phytoseiulus persimilis Athias-Henriot. Two assays were conducted to assess the following variables: the most suitable plant age for mite infestation, and the best time to harvest the mites and re infest the plants. In the first experiment, four, five, six, and seven-week-old plants of P. vulgaris were infested with six T. urticae per foliole. The lower plant stratum exhibited the largest number of mites regardless of plant age. However, four-week old plants had the larger average number of individuals. In the second experiment four-week-old plants were infested with 0.5 female mite/cm{sup 2} of leaf. The number of individuals per instar of T. urticae was recorded weekly. The highest mite production occurred between four and five weeks after infestation, indicating this to be the most suitable for mite harvesting and for plant reinfestation. (author)

  4. [Food additives and healthiness].

    Science.gov (United States)

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  5. 7 CFR 28.162 - Procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Procedure. 28.162 Section 28.162 Agriculture..., TESTING, AND STANDARDS Regulations Under the United States Cotton Standards Act Adjustment of Contract... and in instituting and conducting arbitrations and appeals shall be as prescribed in the articles...

  6. Evaluation of the Neutron Data Standards

    Science.gov (United States)

    Carlson, A. D.; Pronyaev, V. G.; Capote, R.; Hale, G. M.; Chen, Z.-P.; Duran, I.; Hambsch, F.-J.; Kunieda, S.; Mannhart, W.; Marcinkevicius, B.; Nelson, R. O.; Neudecker, D.; Noguere, G.; Paris, M.; Simakov, S. P.; Schillebeeckx, P.; Smith, D. L.; Tao, X.; Trkov, A.; Wallner, A.; Wang, W.

    2018-02-01

    With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations of the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α1 γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.

  7. Operator licensing examiner standards

    International Nuclear Information System (INIS)

    1983-10-01

    The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining and licensing of applicants for NRC operator licenses pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). They are intended to assist NRC examiners and facility licensees to understand the examination process better and to provide for equitable and consistent administration of examinations to all applicants by NRC examiners. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator examination licensing policy changes. As appropriate, these standards will be revised periodically to accommodate comments and reflect new information or experience

  8. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  9. Program Baseline Change Control Procedure

    International Nuclear Information System (INIS)

    1993-02-01

    This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

  10. A quality control procedure for seawater temperature data

    Digital Repository Service at National Institute of Oceanography (India)

    Ghosh, A; Pankajakshan, T.

    A three level quality check has been developed for seawater temperature data. The standards used in the procedure for the quality check are the characteristic property of vertical temperature distribution, watermass property and a standard...

  11. Standardization in measurement philosophical, historical and sociological issues

    CERN Document Server

    Schlaudt, Oliver

    2015-01-01

    The application of standard measurement is a cornerstone of modern science. In this collection of essays, standardization of procedure, units of measurement and the epistemology of standardization are addressed by specialists from sociology, history and the philosophy of science.

  12. 40 CFR 80.162 - Additive compositional data.

    Science.gov (United States)

    2010-07-01

    ... the target value, whichever is less. However, in the case of nitrogen analysis or other procedures for... technical analysis, and for which a specific test procedure is not stipulated herein, the procedure must... component were present in the detergent additive package at the lower bound of the reported range, the...

  13. 40 CFR 79.24 - Termination of registration of additives.

    Science.gov (United States)

    2010-07-01

    ... additives. 79.24 Section 79.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.24 Termination of registration of additives. Registration may be terminated by the Administrator if the additive...

  14. Search for additional Higgs bosons

    CERN Document Server

    Meyer, Jochen; The ATLAS collaboration

    2017-01-01

    The discovery of a Higgs boson with the mass of about 125 GeV completed the particle content predicted by the Standard Model. Even though this model is well-established and consistent with many measurements, it is not capable to solely explain some observations. Many extension addressing this fact introduce additional Higgs-like bosons which can be either neutral, singly-charged or even doubly-charged. The current status of searches based on data of the ATLAS and CMS experiments at the LHC are presented. No indications for such particles were however found.

  15. Frequency standards

    CERN Document Server

    Riehle, Fritz

    2006-01-01

    Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

  16. Human factoring administrative procedures

    International Nuclear Information System (INIS)

    Grider, D.A.; Sturdivant, M.H.

    1991-01-01

    In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

  17. Telemetry Standards, Part 1

    Science.gov (United States)

    2015-07-01

    protocol RCC Range Commanders Council RFC Request For Comment RIU remote interface unit RMM removable memory module RS Recommended Standard RSCF...followed by hex characters Comments COMMENTS G\\COM Allowed when: Always Provide the additional information requested or any other information desired...if applicable. Range: 6 characters Comments COMMENTS M-x\\COM Allowed when: When M\\ID is specified Provide the additional information requested or

  18. Addition of large amount of municipal sewage sludge as raw material in cement clinker production.

    Science.gov (United States)

    Huang, Minrui; Feng, Huajun; Li, Na; Shen, Dongsheng; Zhou, Yuyang; Jia, Yufeng

    2017-12-01

    Two addition modes were used to explore the maximum addition of municipal sewage sludge as a raw material in cement clinker production. The clinker and cement product quality were determined by chemical analysis, cement quality testing, characterization of the clinker crystalline phases, and leaching tests. Municipal sewage sludge addition in the raw mix could be up to 30% based on the cement clinker moduli, and the cement quality met the P.O 42.5 cement standard (GB 175-2007). The amount of municipal sewage sludge added based on the direct addition mode should be less than 15% because of an insufficient early-term cement strength (third day). The leaching concentrations of heavy metals in all cements were below the threshold (GB 30760-2014) using the latest leaching procedure (GB 30810-2014). The municipal sewage sludge could be used with a high addition (30%) in the raw mix as a raw material in cement clinker production.

  19. Standard dilution analysis.

    Science.gov (United States)

    Jones, Willis B; Donati, George L; Calloway, Clifton P; Jones, Bradley T

    2015-02-17

    Standard dilution analysis (SDA) is a novel calibration method that may be applied to most instrumental techniques that will accept liquid samples and are capable of monitoring two wavelengths simultaneously. It combines the traditional methods of standard additions and internal standards. Therefore, it simultaneously corrects for matrix effects and for fluctuations due to changes in sample size, orientation, or instrumental parameters. SDA requires only 200 s per sample with inductively coupled plasma optical emission spectrometry (ICP OES). Neither the preparation of a series of standard solutions nor the construction of a universal calibration graph is required. The analysis is performed by combining two solutions in a single container: the first containing 50% sample and 50% standard mixture; the second containing 50% sample and 50% solvent. Data are collected in real time as the first solution is diluted by the second one. The results are used to prepare a plot of the analyte-to-internal standard signal ratio on the y-axis versus the inverse of the internal standard concentration on the x-axis. The analyte concentration in the sample is determined from the ratio of the slope and intercept of that plot. The method has been applied to the determination of FD&C dye Blue No. 1 in mouthwash by molecular absorption spectrometry and to the determination of eight metals in mouthwash, wine, cola, nitric acid, and water by ICP OES. Both the accuracy and precision for SDA are better than those observed for the external calibration, standard additions, and internal standard methods using ICP OES.

  20. HUMAN RELIABILITY ANALYSIS FOR COMPUTERIZED PROCEDURES

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring; David I. Gertman; Katya Le Blanc

    2011-09-01

    This paper provides a characterization of human reliability analysis (HRA) issues for computerized procedures in nuclear power plant control rooms. It is beyond the scope of this paper to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper provides a review of HRA as applied to traditional paper-based procedures, followed by a discussion of what specific factors should additionally be considered in HRAs for computerized procedures. Performance shaping factors and failure modes unique to computerized procedures are highlighted. Since there is no definitive guide to HRA for paper-based procedures, this paper also serves to clarify the existing guidance on paper-based procedures before delving into the unique aspects of computerized procedures.