WorldWideScience

Sample records for stamps call attention

  1. Does the Food Stamp Program cause obesity? A realist review and a call for place-based research.

    Science.gov (United States)

    DeBono, Nathaniel L; Ross, Nancy A; Berrang-Ford, Lea

    2012-07-01

    The high prevalence of obesity among low income groups has led some to question the role of food assistance programs in contributing to the problem. The USDA's Food Stamp Program (now known as the Supplemental Nutrition Assistance Program - SNAP) is the largest food assistance program in the United States with over 40 million participants. This paper employed systematic realist review methods to determine whether participation in the Food Stamp Program causes obesity and the causal pathways through which this relationship may exist. Findings indicate a more consistent positive relationship for women than for men, especially for women who are long term users of the program. All studies discussed the "food stamp cycle" and an "income effect" as explanations for the role of food stamps in increased obesity yet evidence for these factors is limited. Curiously, the research in this field does not address obesogenic environments and we suggest that the absence of an understanding of household behavior in local contexts is a significant impediment to the reform of the Food Stamp Program. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Study on effective methods to call attention in power plant sites. Towards sharing know-how

    International Nuclear Information System (INIS)

    Tsukada, Tetsuya; Nakamura, Hajime

    1999-01-01

    Methods to call attention during field work in nuclear power plants have not obtained the desired results due to redundancy and poor theoretical support. From the points of view of psychology and human engineering, we theoretically examined the validity of each of the following methods for calling attention: methods deployed in power plants, methods obtained through case studies in other industries, and newly developed methods, and then systematized these methods. Using five typical operations with different operating characteristics as models, we also determined methods deployed for each situation in the operation process. Then we determined and categorized the ways of utilizing methods to call attention according to each operating characteristic. With the aim of utilizing these results in many power plants and promoting the sharing of know-how concerning calling attention, we put together an easy-to-understand 'instruction manual', which contains know-how concerning methods to call attention and an introduction to the newly developed methods. Moreover, we established a 'database' (with a registration function) of methods to call attention, which contains organized methods and patterns of utilizing such methods in each operating characteristic. The present study is thus a report that aims at sharing the know-how, centered on this database. (author)

  3. Calling Attention to the Importance of Assisting Male Survivors of Sexual Victimization

    Science.gov (United States)

    Navarro, Jordana N.; Clevenger, Shelly

    2017-01-01

    Most of the research focusing on sexual victimization on college campuses has focused on females as victims. This attention is warranted given that studies have consistently found that females are at more risk of experiencing victimization compared to males. However, a drawback of this emphasis is that laypersons may incorrectly believe that men…

  4. Stamping through astronomy

    CERN Document Server

    Dicati, Renato

    2013-01-01

    Stamps and other postal documents are an attractive vehicle for presenting astronomy and its development. Written with expertise and great enthusiasm, this unique book offers a historical and philatelic survey of astronomy and some related topics on space exploration. It contains more than 1300 color reproductions of stamps relating to the history of astronomy, ranging from the earliest observations of the sky to modern research conducted with satellites and space probes. Featured are the astronomers and astrophysicists who contributed to this marvelous story – not only Ptolemy, Copernicus, Kepler, Newton, Herschel, and Einstein but also hundreds of other minor protagonists who played an important role in the development of this, the most ancient yet the most modern of all the sciences. The book also examines in depth the diverse areas which have contributed to the history of astronomy, including the instrumentation, the theories, and the observations. Many stamps illustrate the beauty and the mystery of ce...

  5. Cross-Cultural Considerations in Pediatric Neuropsychology: A Review and Call to Attention.

    Science.gov (United States)

    Olson, Katie; Jacobson, Kristin

    2015-01-01

    In the search to understand the basis of performance discrepancies, many clinicians are recognizing that, often, factors with no direct relationship to brain functioning influence performance on neuropsychological measures of cognition among children and adolescents. The emergent research on cross-cultural neuropsychology indicates that while the test performance discrepancies do indeed exist, they can be explained by a number of other factors, some of which are known and others that have yet to be operationalized or even identified. While a review of all such factors is beyond the scope of this article, an examination of those that have received the most attention is presented: factors associated with the examinee, factors associated with the neuropsychological measures, cultural competency of the examiner, and factors at the organizational/political level.

  6. Rapid thermal processing by stamping

    Science.gov (United States)

    Stradins, Pauls; Wang, Qi

    2013-03-05

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  7. A Clarion Call for Social Work Attention: Brothers and Sisters of Persons With Acquired Brain Injury in the United States.

    Science.gov (United States)

    Degeneffe, Charles Edmund

    2016-08-11

    This article presents a clarion call for increased social work attention to the needs of siblings of persons with acquired brain injury (ABI) in the United States. The article overviews how siblings are psychosocially affected, how they provide care to the injured brothers and sisters, and how they personally develop as a result of their experiences. The article highlights the fact that social workers and other professionals often overlook the needs of siblings of persons with ABI and makes an appeal for social workers to advance clinical practice and research to benefit this often neglected population.

  8. Flexible Stamp for Nanoimprint Lithography

    DEFF Research Database (Denmark)

    Nielsen, Theodor; Pedersen, Rasmus H.; Hansen, Ole

    2005-01-01

    by membranes. The bending stiffness difference between the imprint areas and the membranes ensures that the deformation of the stamp during the imprint process mainly takes place in the membranes, leaving the imprint structures unaffected. By this design the strong demand to the parallelism between stamp...... and substrate in the imprint situation is decoupled from the pressing tool and the wafer quality. The stamp consist of 1562 imprint areas (1 mm × 1 mm) containing the patterns to be replicated. The imprinted patterns are characterized with respect to the imprint depth and the polymer residual layer thickness...

  9. Fabrication of Nanoimprint stamps for photonic crystals

    International Nuclear Information System (INIS)

    Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

    2006-01-01

    We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

  10. Implementation of time stamping service

    OpenAIRE

    Tomažin , Vito

    2015-01-01

    This thesis deals with different ways of how to safely time-stamp digital content. The need for time-stamping arises when we would like to create evidence that certain content existed (or that a certain person was present somewhere) in a precisely specified period of time, so that later we can refer to this evidence. Creating temporal order in the digital world can prove to be difficult, since no data, including time, is recorded permanently. The system clock, which measures time with the ...

  11. Food Stamps. Learning Packet No. 2.

    Science.gov (United States)

    American Bar Association, Washington, DC. Clearinghouse for Offender Literacy Programs.

    This package of instructional materials is designed to aid adults in prison to perform the functional skill of applying for food stamps. The materials consist of instructions for teachers, a sample application for food stamps, a student's work sheet and answer sheet, vocabulary flash cards, and resource materials on food stamps. (MKM)

  12. 7 CFR 916.115 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 916.115 Section 916.115 Agriculture... and Regulations § 916.115 Lot stamping. Except when loaded directly into railway cars, exempted under... Inspection Service lot stamp number, assigned by such Service, showing that such fruit has been USDA...

  13. 7 CFR 917.150 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 917.150 Section 917.150 Agriculture... CALIFORNIA Rules and Regulations Regulation of Daily Shipments § 917.150 Lot stamping. Except when loaded..., prior to shipment, with a Federal-State Inspection Service lot stamp number, assigned by such Service...

  14. Stamp Verification for Automated Document Authentication

    DEFF Research Database (Denmark)

    Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

    Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...

  15. Seroepidemiology of Human Brucellosis Among Blood Donors in Southern Ethiopia: Calling Attention to a Neglected Zoonotic Disease.

    Science.gov (United States)

    Workalemahu, Bereket; Sewunet, Tsegaye; Astatkie, Ayalew

    2017-01-11

    Human brucellosis is neglected in southern Ethiopia. Although traditional food processing practices and animal husbandry which increase the risk of brucellosis are common, it has not been properly studied yet. This study was conducted to determine the seroepidemiology of brucellosis among apparently healthy individuals in southern Ethiopia. In the study, blood samples were collected to screen for serum agglutinins reactive to stained antigen of Brucella abortus Standard tube titration was performed for reactive serum to determine the titer of the agglutinin. A structured questionnaire was used to collect data on possible risk factors for brucellosis. The seroprevalence of human brucellosis in this study was found to be 10.6% (95% confidence interval = 7.0, 14.0). Possession of domestic ruminant animals, contact with ruminant animals, and husbandry practices at home were associated with seropositivity. The higher seroprevalence of human brucellosis in the study area needs attention and additional confirmatory investigation. © The American Society of Tropical Medicine and Hygiene.

  16. Stamping the Earth from space

    CERN Document Server

    Dicati, Renato

    2017-01-01

    This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

  17. Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

    Science.gov (United States)

    Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

    2017-12-01

    LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

  18. The STAMP Software for State Space Models

    Directory of Open Access Journals (Sweden)

    Roy Mendelssohn

    2011-05-01

    Full Text Available This paper reviews the use of STAMP (Structural Time Series Analyser, Modeler and Predictor for modeling time series data using state-space methods with unobserved components. STAMP is a commercial, GUI-based program that runs on Windows, Linux and Macintosh computers as part of the larger OxMetrics System. STAMP can estimate a wide-variety of both univariate and multivariate state-space models, provides a wide array of diagnostics, and has a batch mode capability. The use of STAMP is illustrated for the Nile river data which is analyzed throughout this issue, as well as by modeling a variety of oceanographic and climate related data sets. The analyses of the oceanographic and climate data illustrate the breadth of models available in STAMP, and that state-space methods produce results that provide new insights into important scientific problems.

  19. Attention and Motivated Response to Simulated Male Advertisement Call Activates Forebrain Dopaminergic and Social Decision-Making Network Nuclei in Female Midshipman Fish.

    Science.gov (United States)

    Forlano, Paul M; Licorish, Roshney R; Ghahramani, Zachary N; Timothy, Miky; Ferrari, Melissa; Palmer, William C; Sisneros, Joseph A

    2017-10-01

    Little is known regarding the coordination of audition with decision-making and subsequent motor responses that initiate social behavior including mate localization during courtship. Using the midshipman fish model, we tested the hypothesis that the time spent by females attending and responding to the advertisement call is correlated with the activation of a specific subset of catecholaminergic (CA) and social decision-making network (SDM) nuclei underlying auditory- driven sexual motivation. In addition, we quantified the relationship of neural activation between CA and SDM nuclei in all responders with the goal of providing a map of functional connectivity of the circuitry underlying a motivated state responsive to acoustic cues during mate localization. In order to make a baseline qualitative comparison of this functional brain map to unmotivated females, we made a similar correlative comparison of brain activation in females who were unresponsive to the advertisement call playback. Our results support an important role for dopaminergic neurons in the periventricular posterior tuberculum and ventral thalamus, putative A11 and A13 tetrapod homologues, respectively, as well as the posterior parvocellular preoptic area and dorsomedial telencephalon, (laterobasal amygdala homologue) in auditory attention and appetitive sexual behavior in fishes. These findings may also offer insights into the function of these highly conserved nuclei in the context of auditory-driven reproductive social behavior across vertebrates. © The Author 2017. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

  20. Time Stamps for Fixed-Point Approximation

    DEFF Research Database (Denmark)

    Damian, Daniela

    2001-01-01

    Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed-point approximat......Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed...

  1. Stamping SERS for creatinine sensing

    Science.gov (United States)

    Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

    2015-03-01

    Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

  2. Evolutions of Advanced Stamping CAE — Technology Adventures and Business Impact on Automotive Dies and Stamping

    Science.gov (United States)

    Wang, Chuantao (C. T.)

    2005-08-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness), (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines), (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping.

  3. Evolutions of Advanced Stamping CAE -- Technology Adventures and Business Impact on Automotive Dies and Stamping

    International Nuclear Information System (INIS)

    Wang Chuantao

    2005-01-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness) (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines) (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping

  4. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    International Nuclear Information System (INIS)

    Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

    2016-01-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

  5. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    Science.gov (United States)

    Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

    2016-02-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

  6. Stamped coal cakes in cokemaking technology Part 2 - The investigation of cake strength

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before the pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the cokemaking plant using cost efficient raw materials, but also increases oven throughput. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend and as a function of the stamping energy. In the first part of the paper, investigations on the stampability of coal blends were reported. In this paper, the development of a new strength test device for the systematic investigation of mechanical strength of coal compacts produced by stamping is described. Results from compressive strength tests indicate an elastic-plastic behaviour with failure by plastic fracture. Shear test results show similarity to the yield limit description in soil mechanics.

  7. Stamp Detection in Color Document Images

    DEFF Research Database (Denmark)

    Micenkova, Barbora; van Beusekom, Joost

    2011-01-01

    , moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

  8. METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

    Directory of Open Access Journals (Sweden)

    CARAUS MADALINA

    2015-12-01

    Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

  9. Stamping Die Making. 439-318/320.

    Science.gov (United States)

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  10. Two Important Stamp Motifs in Roman Britain and Thereafter

    Directory of Open Access Journals (Sweden)

    Diana C. Briscoe

    2016-03-01

    Full Text Available Stamped pottery has had a long and varied history in Britain. There have been periods when it flourished and periods when it almost totally disappeared. This article considers two variations of the rosette motif (A 5 and their fortunes from the late Iron Age to the Early Saxon period. Having been of little importance in the Iron Age and early Roman periods, they became some of the most widely used and distributed motifs in the fourth century. By the fifth century, they were still important, but formed a much smaller proportion of the total motifs than in the fourth century. In the vast majority of cases, there is no correlation between the find spots of fourth and fifth century examples. However, I have identified nine locations where one or other of the two motifs have been found on a late Roman site, which lies within a mile of another site with the same motif, but from the post-Roman period. In these rare conjunctions, I believe that ongoing usage of the motif can be demonstrated from Roman to post-Roman times. It is also clear that pot stamp evidence can be vital in identifying these highly unusual locations and pointing other researchers to sites worthy of special attention.

  11. Fast thermal nanoimprint lithography by a stamp with integrated heater

    DEFF Research Database (Denmark)

    Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

    2008-01-01

    We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

  12. Ex-Post : The Investment Performance of Collectible Stamps

    NARCIS (Netherlands)

    Dimson, E.; Spaenjers, C.

    2009-01-01

    This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

  13. Stamped coal cakes in cokemaking technology Part 1 - A parameter study on stampability

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the coke making plant using cost efficient raw materials, but oven throughput is also increased. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend depending on the stamping energy. The first part of this paper defines the overall process objectives and presents results from systematic investigations of the effects of several coal properties on the so called stampability as the integral model parameter for compacting. Surface moisture, coal granulometry and mechanical properties have significant influence on the densification. The incorporation of these parameters into the model allows the differentiated calculation of the cake density.

  14. The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

    Directory of Open Access Journals (Sweden)

    Kaadyr-ool A. Bicheldey

    2016-09-01

    Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

  15. Hot stamping advanced manufacturing technology of lightweight car body

    CERN Document Server

    Hu, Ping; He, Bin

    2017-01-01

    This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

  16. Hot stamping of AA7075 aluminum sheets

    Science.gov (United States)

    Mendiguren, J.; Saenz de Argandona, E.; Galdos, L.

    2016-11-01

    In this work the formability of a high strength aluminium alloy (AA7075-T6) for the stamping of an automotive component has been studied. Due to the low formability of the selected alloy, two different heat assisted forming strategies have been analysed. On the one hand, the W-temper process, where the thermal process is carried out prior to the forming operation. On the other hand, the hot stamping process, where the thermal process is carried out at the same time as the forming. The results showed that both technology were able to form the component avoiding any failure of the material. On the contrary, both processes reduced the final mechanical properties of the material compared to the as received material condition. However, the obtained mechanical properties doubled the strength of commonly used 5xxx and 6xxx aluminium alloys.

  17. DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

    Directory of Open Access Journals (Sweden)

    Rudi Kurniawan Arief

    2017-12-01

    Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

  18. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method.

    Science.gov (United States)

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2013-03-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  19. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method

    OpenAIRE

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2012-01-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  20. How Do Stamp Duties Affect the Housing Market?

    OpenAIRE

    Davidoff, Ian; Leigh, Andrew

    2013-01-01

    Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

  1. Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

    International Nuclear Information System (INIS)

    Park, Jongho; Kim, Beomjoon

    2016-01-01

    Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

  2. Stamp duties in Indian states - a case for reform

    OpenAIRE

    Alm, James; Annez, Patricia; Modi, Arbind

    2004-01-01

    The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

  3. Design and Development of a Soap Stamping and Tableting ...

    African Journals Online (AJOL)

    A soap stamping and tableting machine comprising a printing die/pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205 soap tablets per hour with an ...

  4. Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

    Directory of Open Access Journals (Sweden)

    M. Kumar

    2017-01-01

    Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

  5. Facile stamp patterning method for superhydrophilic/superhydrophobic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Sungnam, E-mail: blueden@postech.ac.kr; Hwang, Woonbong, E-mail: whwang@postech.ac.kr [Department of Mechanical Engineering, POSTECH, Pohang 680-749 (Korea, Republic of)

    2015-11-16

    Patterning techniques are essential to many research fields such as chemistry, biology, medicine, and micro-electromechanical systems. In this letter, we report a simple, fast, and low-cost superhydrophobic patterning method using a superhydrophilic template. The technique is based on the contact stamping of the surface during hydrophobic dip coating. Surface characteristics were measured using scanning electron microscopy and energy-dispersive X-ray spectroscopic analysis. The results showed that the hydrophilic template, which was contacted with the stamp, was not affected by the hydrophobic solution. The resolution study was conducted using a stripe shaped stamp. The patterned line was linearly proportional to the width of the stamp line with a constant narrowing effect. A surface with regions of four different types of wetting was fabricated to demonstrate the patterning performance.

  6. A cracked beam or plate transversely loaded by a stamp

    Science.gov (United States)

    Nied, H. F.; Erdogan, F.

    1979-01-01

    In this paper the problem of an infinite elastic beam or a plate containing a crack is considered. The medium is loaded transversely through a stamp which may be rigid or elastic. The problem is a coupled crack-contact problem which cannot be solved by treating the crack and contact problems separately and by using a superposition technique. First the Green's functions for the general case are obtained. Then the integral equations for a cracked infinite strip loaded by a frictionless stamp are obtained. With the question of fracture in mind, the primary interest in the paper has been in calculating the stress intensity factors. The results are given for a rigid flat stamp with sharp edges and for an elastic curved stamp. The effect of friction at the supports on the stress intensity factors is also studied and a numerical example is given.

  7. design and development of a soap stamping and tableting machine

    African Journals Online (AJOL)

    2012-07-02

    pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205.

  8. EMERGENCY CALLS

    CERN Multimedia

    2001-01-01

    IN URGENT NEED OF A DOCTOR GENEVA EMERGENCY SERVICES GENEVA AND VAUD 144 FIRE BRIGADE 118 POLICE 117 CERN FIREMEN 767-44-44 ANTI-POISONS CENTRE Open 24h/24h 01-251-51-51 Patient not fit to be moved, call family doctor, or: GP AT HOME, open 24h/24h 748-49-50 Association Of Geneva Doctors Emergency Doctors at home 07h-23h 322 20 20 Patient fit to be moved: HOPITAL CANTONAL CENTRAL 24 Micheli-du-Crest 372-33-11 ou 382-33-11 EMERGENCIES 382-33-11 ou 372-33-11 CHILDREN'S HOSPITAL 6 rue Willy-Donzé 372-33-11 MATERNITY 32 bvd.de la Cluse 382-68-16 ou 382-33-11 OPHTHALMOLOGY 22 Alcide Jentzer 382-33-11 ou 372-33-11 MEDICAL CENTRE CORNAVIN 1-3 rue du Jura 345 45 50 HOPITAL DE LA TOUR Meyrin EMERGENCIES 719-61-11 URGENCES PEDIATRIQUES 719-61-00 LA TOUR MEDICAL CENTRE 719-74-00 European Emergency Call 112 FRANCE EMERGENCY SERVICES 15 FIRE BRIGADE 18 POLICE 17 CERN FIREMEN AT HOME 00-41-22-767-44-44 ANTI-POISONS CENTRE Open 24h/24h 04-72-11-69-11 All doctors ...

  9. Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

    OpenAIRE

    Wood, Gavin A.

    1994-01-01

    The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

  10. "Stamp-off" to micropattern sparse, multicomponent features.

    Science.gov (United States)

    Desai, Ravi A; Rodriguez, Natalia M; Chen, Christopher S

    2014-01-01

    Spatially patterned subtractive de-inking, a process we term "stamp-off," provides a simple method to generate sparse, multicomponent protein micropatterns. It has been applied to control cell adhesion, study adhesion biology, as well as to micropattern fragile surfaces. This technique can also readily be applied to study nanoscale interactions between cell membrane receptors and surface-immobilized ligands. It is based on conventional microcontact printing and as such requires the same reagents, including photolithographically defined masters, a spin-coater, poly(dimethyl siloxane) (PDMS), and conventional cell culture reagents such as glass coverslips and adhesive proteins. Stamp-off is conceptually simplified into three steps: (1) generation of an appropriate cell culture substrate, PDMS-coated glass, (2) micropatterning with stamp-off, and (3) cell deposition. After elaborating each of these three methods, we discuss limitations of the technique and its applications. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Optimum utilization of low ash carbonaceous constituents in stamp charging

    Energy Technology Data Exchange (ETDEWEB)

    Dash, P.S.; Krishnan, S.H.; Sharma, R. [Tata Steel, Jamshedpur (India)

    2004-07-01

    To produce high strength coke at reasonable cost, Tata Steel went for stamp charging along with 40-45% imported coal. It is imperative to design the base stamp charge coal blend so as to possess enough fluidity to assimilate these infusible inerts and still produce coke with high coke strength after reaction (CSR). This paper describes the scope of utilising low ash carbonaceous inerts like fluid coke (a petroleum coke made in a fluidized bed) and anthracite optimally in the stamp charging blend by replacing the present imported semi-soft coal with high fluidity imported coals. The laboratory scale experimentation and its results regarding improvement in coke properties and yield are also described. 5 refs., 2 figs., 3 tabs.

  12. Time Stamp Synchronization of PEFP Distributed Control Systems

    International Nuclear Information System (INIS)

    Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

    2010-01-01

    Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

  13. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; Wazny, Scott; Kaunitz, Leon; Waldron, Douglas J.

    2006-02-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir welded aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  14. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; wazny, scott; Kaunitz, Leon; Waldron, D.

    2005-04-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arrise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir woined, aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  15. Modelling the deformation process of flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard

    The present thesis is devoted to numerical modelling of the deformation process of flexible stamps for nanoimprint lithography (NIL). The purpose of those models is to be able to predict the deformation and stretch of the flexixble stamps in order to take that into account when designing the plan...... 2D silicon master used in the NIL process. Two different manufacturing processes are investigated; (i) Embossing of an electroplated nickel foil into a hydrogen silsesquioxane (HSQ) polymer resist on a double-curved surface, (ii) NIL of a flexible polytetrafluoroethylene (PTFE) stamps...... into a polymethyl methacrylate (PMMA) resist. Challenges comprise several non-linear phenomena. First of all geometrical non-linearities arising from the inherent large strains and deformations during the process are modelled. Then, the constitutive behaviors of the nickel foil and the PTFE polymer during...... deformation are addressed. This is achieved by a general elasto-plastic description for the nickel foil and a viscoelastic-viscoplastic model for the PTFE material, in which the material parameters are found. Last, the contact conditions between the deforming stamp and the injection moulding tool insert...

  16. 46 CFR 53.10-10 - Certification by stamping.

    Science.gov (United States)

    2010-10-01

    ... boilers shall be as indicated in HG-530 of section IV of the ASME Boiler and Pressure Vessel Code... 46 Shipping 2 2010-10-01 2010-10-01 false Certification by stamping. 53.10-10 Section 53.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Tests...

  17. 41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

  18. 26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Unauthorized use or sale of stamps. 301.7209-1... § 301.7209-1 Unauthorized use or sale of stamps. (a) Any person who buys, sells, offers for sale, uses... regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

  19. Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

    International Nuclear Information System (INIS)

    Meng Fantao; Chu Jinkui; Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak; Maximov, Ivan; Montelius, Lars; Xu, H Q; Nilsson, Lars

    2011-01-01

    Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

  20. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Science.gov (United States)

    Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

    2010-07-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  1. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Energy Technology Data Exchange (ETDEWEB)

    Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

    2010-07-21

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  2. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    International Nuclear Information System (INIS)

    Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

    2010-01-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  3. Attention to Attention

    DEFF Research Database (Denmark)

    Tække, Jesper; Paulsen, Michael Eric

    In these years digital media and wireless networks are introduced in upper secondary schools in Denmark. This implies new “attentional objects” like updates on Facebook or tweets on Twitter within instant reach of the pupils and teachers. Also it implies new kinds of attention (awareness) like when...... pupils try to listen to the teacher and simultaneously participate in online games. To this new social setting the teachers has reacted with either prohibition or unconcern. What has not been realised is that the introduction of new media profoundly challenges the way attention hitherto has functioned...... as a psychic prerequisite for the social interaction between pupils and teachers. New kinds of “split attention” arise and new kinds of social mediation (regulation and “use”) of psychic attention become necessary if teaching in the new digital medium milieu shall be beneficial. In this paper we qualify...

  4. Soil Temperature and Moisture Profile (STAMP) System Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

  5. Reactive wet stamping for patterning of polyelectrolyte multilayers.

    Science.gov (United States)

    Cho, Chungyeon; Valverde, Lauralee; Ozin, Geoffrey A; Zacharia, Nicole S

    2010-08-17

    Patterning of soft films, especially their bulk and not only their surface properties, presents a challenge. Several lithographic techniques do exist, but many of them are complex or limited in their ability to change properties. A few methods of patterning polyelectrolyte multilayers (PEM) have been reported, including microcontact printing and selectively growing layers on patterned self-assembled monolayers, but these all come with certain limitations. We present here the use of a modified microcontact printing method, reactive wet stamping (r-WETs), using a hydrogel stamp soaked in aqueous solutions to create patterns in PEMs. With this technique we are able to locally cause swelling and porosity changes in the PEM films and use our method to qualitatively study the evolution of the porous film morphology. This technique has the potential to locally control chemical functionality, film thickness, and mechanical properties, leading to a new ability to control film architectures both at the film surface and within the bulk of the film.

  6. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    OpenAIRE

    Pasquale Russo Spena

    2017-01-01

    This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

  7. Monitoring enzymatic degradation of pericellular matrices through SERS stamping

    Science.gov (United States)

    Yan, Bo; Hong, Yan; Chen, Tianhong; Reinhard, Björn M.

    2012-06-01

    We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix.We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix. Electronic supplementary information

  8. ANALYSIS OF FOOD STAMP PROGRAM PARTICIPATION AND FOOD EXPENDITURES

    OpenAIRE

    Smallwood, David M.; Blaylock, James R.

    1985-01-01

    A two equation model is developed to examine jointly the determinants of household food stamp program participation and program effects on food expenditures. The model is unique in that it postulates that the participation decision is based on a cost-benefit ratio, selected socioeconomic characteristics, and the potential for increasing both food and nonfood expenditures. Data from the 1977-78 USDA Nationwide Food Consumption Survey Supplemental Low Income Sample is used to estimate the model...

  9. Call Forecasting for Inbound Call Center

    Directory of Open Access Journals (Sweden)

    Peter Vinje

    2009-01-01

    Full Text Available In a scenario of inbound call center customer service, the ability to forecast calls is a key element and advantage. By forecasting the correct number of calls a company can predict staffing needs, meet service level requirements, improve customer satisfaction, and benefit from many other optimizations. This project will show how elementary statistics can be used to predict calls for a specific company, forecast the rate at which calls are increasing/decreasing, and determine if the calls may stop at some point.

  10. Studies on the finite element simulation in sheet metal stamping processes

    Science.gov (United States)

    Huang, Ying

    The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

  11. Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

    Science.gov (United States)

    Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

    2015-05-29

    Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

  12. Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

    International Nuclear Information System (INIS)

    Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

    2017-01-01

    The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

  13. Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

    Science.gov (United States)

    Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

    2018-01-01

    The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

  14. Time series analysis of tool wear in sheet metal stamping using acoustic emission

    Science.gov (United States)

    Vignesh Shanbhag, V.; Pereira, P. Michael; Rolfe, F. Bernard; Arunachalam, N.

    2017-09-01

    Galling is an adhesive wear mode that often affects the lifespan of stamping tools. Since stamping tools represent significant economic cost, even a slight improvement in maintenance cost is of high importance for the stamping industry. In other manufacturing industries, online tool condition monitoring has been used to prevent tool wear-related failure. However, monitoring the acoustic emission signal from a stamping process is a non-trivial task since the acoustic emission signal is non-stationary and non-transient. There have been numerous studies examining acoustic emissions in sheet metal stamping. However, very few have focused in detail on how the signals change as wear on the tool surface progresses prior to failure. In this study, time domain analysis was applied to the acoustic emission signals to extract features related to tool wear. To understand the wear progression, accelerated stamping tests were performed using a semi-industrial stamping setup which can perform clamping, piercing, stamping in a single cycle. The time domain features related to stamping were computed for the acoustic emissions signal of each part. The sidewalls of the stamped parts were scanned using an optical profilometer to obtain profiles of the worn part, and they were qualitatively correlated to that of the acoustic emissions signal. Based on the wear behaviour, the wear data can be divided into three stages: - In the first stage, no wear is observed, in the second stage, adhesive wear is likely to occur, and in the third stage severe abrasive plus adhesive wear is likely to occur. Scanning electron microscopy showed the formation of lumps on the stamping tool, which represents galling behavior. Correlation between the time domain features of the acoustic emissions signal and the wear progression identified in this study lays the basis for tool diagnostics in stamping industry.

  15. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    OpenAIRE

    Nosova Ekaterina; Erisov Yaroslav; Grechnikov Fedor

    2017-01-01

    Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strai...

  16. 49 CFR 238.119 - Rim-stamped straight-plate wheels.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rim-stamped straight-plate wheels. 238.119 Section... Requirements § 238.119 Rim-stamped straight-plate wheels. (a)(1) Except as provided in paragraph (a)(2) of this... than a private car, that is equipped with a rim-stamped straight-plate wheel if a brake shoe acts on...

  17. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    OpenAIRE

    Ji Kang; Liu Xiaochuan; El Fakir Omer; Liu Jun; Zhang Qunli; Wang Liliang

    2016-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values betwe...

  18. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    OpenAIRE

    Liu Xiaochuan; Ji Kang; Fakir Omer El; Liu Jun; Zhang Qunli; Wang Liliang

    2015-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a h...

  19. Minerals on postage stamps: A mix of art, history, economics and geography

    Science.gov (United States)

    Glover, Paul

    2010-05-01

    Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

  20. Simulation Study on Hot Stamping Forming of the Drive Axle Housing of Heavy Truck

    Science.gov (United States)

    Dai, Yongqian; Ji, Jianyi; Luo, Lingjiang

    2018-01-01

    Aiming at the national energy-saving and emission reduction requirements, lightweight of the heavy truck is imminent. Several parameters related to hot stamping forming process of heavy truck drive axle housing are studied in this paper. The results show that the existing two-step stamping with air cooling molding process, can be improved into one-step hot stamping process. The initial temperature of the blank, stamping speed and other parameters related to the forming process were optimized. The results provides useful reference for improving the existing forming process of the drive axle housing, and it is also helpful for realizing the lightweight design of drive axle housing.

  1. An interactive and flexible approach to stamping design and optimization

    International Nuclear Information System (INIS)

    Roy, Subir; Kunju, Ravi; Kirby, David

    2004-01-01

    This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

  2. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    Directory of Open Access Journals (Sweden)

    Pasquale Russo Spena

    2017-10-01

    Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

  3. Core-satellite supraparticles to ballistically stamp nanostructures on surfaces.

    Science.gov (United States)

    Oppmann, Maximilian; Miller, Franziska; Thürauf, Sandra; Groppe, Philipp; Prieschl, Johannes; Stauch, Claudia; Mandel, Karl

    2018-03-27

    Nanostructured surfaces are of great importance in a very wide range of fields. They can be obtained by imprint or deposition techniques. However, these are usually sophisticated to perform. Generally, it is not easy to equip an object/product with a nanostructure post manufacturing. Yet, it would be very beneficial to achieve a modification of an arbitrary surface with a nanostructure of choice at a later stage by an approach that is simple to perform without the need of sophisticated equipment or excessive treatment by physico-chemical methods. Herein, such a process is reported which combines two "old-fashioned" techniques, namely sandblasting and rubber-stamping, and translates them to the "nano-world". By creating core-satellite supraparticles via spray-drying, a ballistic core-satellite stamp particle system is obtained which can be used to easily transfer a wide range of nanoparticles to a great variety of surfaces to equip these with a nanostructure and subsequently advanced properties. These include water-repellant, anti-fouling or anti-dust surfaces. Moreover, it is also demonstrated that the approach can be used to manufacture well-defined nano-imprinted surfaces. Such surfaces showed an improved spreading behavior for aliphatic alcohols, thus rendering such surfaces for instance very susceptible for disinfectants. All in all, the simple technique described herein has a great potential for creating nanostructured surfaces on nearly any surface.

  4. Stamping, Clapping and Chanting: An Ancient Learning Pathway?

    Directory of Open Access Journals (Sweden)

    Marion M. Long

    2006-04-01

    Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

  5. Size Effect Studies on Tensile Tests for Hot Stamping Steel

    Science.gov (United States)

    Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

    2018-02-01

    Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

  6. Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

  7. Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

    Science.gov (United States)

    National Women's History Project, Windsor, CA.

    This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

  8. Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

    Science.gov (United States)

    Gundersen, Craig; Kreider, Brent

    2008-01-01

    Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

  9. 27 CFR 70.332 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

  10. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Ji Kang

    2016-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

  11. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Liu Xiaochuan

    2015-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

  12. Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

    Science.gov (United States)

    Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

    2016-10-01

    Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

  13. Automatic machine for the stamp charging of cakes of coal for coking. Machine automatique pour le pilonnage des pains de charbon a cokefier

    Energy Technology Data Exchange (ETDEWEB)

    Baro, R.; Crauser, L.; Mely, A.

    1988-06-29

    This machine, which consists of several basic stamp chargers that are interlinked and each of which has several stamps, has a total length that is one run less than the length of the stamp charging box, all the stamps being a constant distance apart which is at most equal to the said run so that the alternating movement of the machine along the rung ensures that the coal is stamp charged along the whole length of the stamp charging box, the stamps being, in addition, braked and stopped when necessary by an idler roller device that acts automatically in the stamp's ascending direction.

  14. Titanium nitride stamps replicating nanoporous anodic alumina films

    International Nuclear Information System (INIS)

    Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

    2007-01-01

    Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

  15. A novel time stamping technique for distributed data acquisition systems

    Science.gov (United States)

    Subramaniam, E. T.

    2012-12-01

    In this paper, we discuss the design and implementation of a synchronizing technique for data acquisition systems, which can effectively use the normal, standard local area network cables to provide a time stamp, with a range up to 32 days, resolution of 10 ns, and synchronization within ± 5 ns. This system may be used to synchronize data being collected by independent heterogeneous data acquisition modules, that acquire events independently. Such distributed systems are generally designed with a tree-like structure or independent self-triggered acquisition boxes. These leaf edges are connected through branches to the root node, via non-bus based inter-connecting links. The present system has been tested with a set of self-triggered digital signal processing based data acquisition engines, having a 100 MHz analog to digital converter front end.

  16. A unique patterned diamond stamp for a periodically hierarchical nanoarray structure

    Science.gov (United States)

    Wang, Yi; Shen, Yanting; Xu, Weiqing; Xu, Shuping; Li, Hongdong

    2016-10-01

    A diamond stamp with a hierarchical pattern was designed for the direct preparation of a periodic nanoarray structure, which was prepared by the reactive ion etching technique with a hierarchical ultrathin alumina membrane (HUTAM) as a mask. The optimal etching conditions for fabricating the diamond stamp were discussed in order to realize a vertical nanopore structure, avoiding structural damage from lateral etching. By using this diamond stamp, a polymer film with the desired hierarchical nanorod array structure can be obtained easily via the simple stamping process, which greatly simplifies the processing procedure. More importantly, the stamp is reusable because of its super-hardness, which ensures the reproducibility of the nanorod array pattern. Another merit is that the smooth surface of the etched diamond can avoid the use of a release agent. Our results prove that this hard stamp can be used for quick preparation of an elaborate periodic nanoarray structure. This study is significant in that it solves the problems of high cost and easy damage of stamps in nanoimprint lithography, and it might inspire more sophisticated applications of such an ordered structure in nanoplasmonics, biochemical sensing and nanophotonic devices.

  17. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  18. Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

    Directory of Open Access Journals (Sweden)

    Juergen Brugger

    2013-10-01

    Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

  19. Conical tungsten stamps for the replication of pore arrays in anodic aluminium oxide films

    Science.gov (United States)

    LeClere, D. J.; Thompson, G. E.; Derby, B.

    2009-06-01

    A tungsten master stamp has been generated by applying a novel procedure that includes two-step anodizing, followed by sequential anodizing and pore widening to develop nominally funnelled pores. These conical-shaped pores were filled with tungsten by sputter coating to manufacture a master stamp. Under a pressure of 65 MPa, the master stamp successfully embossed the surface of annealed and electropolished aluminium. The embossed surface was then used to control the position of pores created by anodizing under the conditions used to produce the original pore array.

  20. Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

    Science.gov (United States)

    Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

    2017-12-01

    Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

  1. Mars Express/MARSIS - Analysis and solution of an anomaly event: MARSIS Data Bad Time Stamp

    Science.gov (United States)

    Giuppi, S.; Cartacci, M.; Cicchetti, A.; Noschese, R.; Orosei, R.

    2011-10-01

    This paper describes the detection, the analysis and the possible solutions of an anomaly event occurred sometimes in MARSIS science data consisting in the corruption of the Spacecraft Event Time (SCET): MARSIS Data Bad Time Stamp.

  2. Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

    CERN Document Server

    Lim, Yongseob; Ulsoy, A Galip

    2014-01-01

    Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

  3. 31 CFR 500.410 - Currency, coins, and postage and other stamps.

    Science.gov (United States)

    2010-07-01

    ... postage and other stamps issued by North Korea, North Viet-Nam, Cambodia, or South Viet-Nam are merchandise of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin subject to § 500.204(a)(1). ...

  4. A burial with a stamp seal depicting a Bes-like figure from Abusir

    Czech Academy of Sciences Publication Activity Database

    Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

    2015-01-01

    Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

  5. Callings and Organizational Behavior

    Science.gov (United States)

    Elangovan, A. R.; Pinder, Craig C.; McLean, Murdith

    2010-01-01

    Current literature on careers, social identity and meaning in work tends to understate the multiplicity, historical significance, and nuances of the concept of calling(s). In this article, we trace the evolution of the concept from its religious roots into secular realms and develop a typology of interpretations using occupation and religious…

  6. Call 1 FAQ (ENG)

    International Development Research Centre (IDRC) Digital Library (Canada)

    Francine Sinzinkayo

    What is your definition of “improvement” in this Call for proposals? “Improvement” as used in this call implies all innovations that may be applied by research teams to develop a vaccine that is superior to a current one. Examples of improvement are better adjuvant, vaccine delivery systems or formulations that present ...

  7. Dimensioning large call centers

    NARCIS (Netherlands)

    S.C. Borst (Sem); A. Mandelbaum; M.I. Reiman

    2000-01-01

    textabstractWe develop a framework for asymptotic optimization of a queueing system. The motivation is the staffing problem of call centers with 100's of agents (or more). Such a call center is modeled as an M/M/N queue, where the number of agents~$N$ is large. Within our framework, we determine the

  8. High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

    Science.gov (United States)

    Valls, I.; Hamasaiid, A.; Padré, A.

    2017-09-01

    In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

  9. Insulation from basaltic stamp sand. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, F. D.

    1981-04-01

    A Midwest Appropriate Technology Grant was awarded to determine the technical and economic feasibility of producing mineral-fiber insulation directly from extensive deposits of basaltic sand produced during former mining and milling operations in the Keweenaw Peninsula region of Michigan's Upper Peninsula. The amounts of local basaltic sands available and representative chemical compositions were determined. The variation of viscosity with temperature and chemical composition was estimated. Samples were melted and either pulled or blown into fiber. In all cases fiber could be made with a reasonable tensile strength to ensure usefulness. It was concluded that it was technically feasible to produce fibers from basaltic stamp sands of the Upper Peninsula of Michigan. A technical feasibility study using published data, a cost and design analysis of a basalt fiber production plant, a market survey of fiber needs, and an economic analysis for investing in a basalt fiber venture was undertaken. These studies concluded that the local production of basaltic insulation was both feasible and economically reasonable. It was suggested that the plant be located in a region of greater population density with lower utility costs. A representative one-third of these studies is included as appendices A, B, C, and D.

  10. Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes

    OpenAIRE

    YAZICI, Aysel

    2014-01-01

    The effects of the hot stamping process and different hardfacing techniques, such as shielded metal arc welding (SMAW) and gas metal arc welding (GMAW), on the abrasive wear of ploughshares were investigated under field operational conditions. The abrasive wear losses were determined by measuring the weight and dimension changes before and after tillage. The wear losses of hot-stamped and hardfaced ploughshares were less significant than those of the conventionally heat-treated ploughshare sp...

  11. Springback analysis of AA5754 after hot stamping: Experiments and FE modelling

    OpenAIRE

    Wang, A; Zhong, K; El Fakir, O; Sun, C; Wang, L; Lin, J; Dean, TA

    2016-01-01

    In this paper, the springback of the aluminium alloy AA5754 under hot stamping conditions was characterised under stretch and pure bending conditions. It was found that elevated temperature stamping was beneficial for springback reduction, particularly when using hot dies. Using cold dies, the flange springback angle decreased by 9.7 % when the blank temperature was increased from 20 to 450 ?C, compared to the 44.1 % springback reduction when hot dies were used. Various other forming conditio...

  12. A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

    Science.gov (United States)

    Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

    2011-08-01

    Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

  13. Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis

    Science.gov (United States)

    Mu, Yanhong; Wang, Baoyu; Zhou, Jing; Huang, Xu; Li, Xuetao

    2017-11-01

    Hot-stamped components with tailored properties are becoming popular for their better performance in collision. In this article, an M-shaped part with varying properties was formed by hot stamping using partition heating. Different soaking temperatures induce different austenite fractions at the different regions of the blank, resulting in the partitioned microstructure and mechanical properties in a single part. In the high-temperature region, the average tensile strength and elongation are 1565 MPa and 8.65 pct, respectively, and the average tensile strength and elongation are 626 MPa and 24.37 pct, respectively, in the low-temperature region. A finite element model of hot stamping using partition heating was established based on the relationship of austenite fraction with heating temperature determined by the dilatometer test and the stress-strain curve of 22MnB5 with different austenite fractions acquired from the hot tensile test.The differences of temperature, thickness, and Vickers hardness in different zones of the M-shaped part during forming and quenching stages were analyzed. The effects of hot stamping parameters, such as stamping velocity and heating temperature, on the forming and mechanical properties of the tailored M-shaped part were investigated, providing theoretical guidance for the production of tailored hot-stamped components using partition heating.

  14. Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

    Science.gov (United States)

    Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

    2009-09-08

    The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

  15. Shifting Attention

    Science.gov (United States)

    Ingram, Jenni

    2014-01-01

    This article examines the shifts in attention and focus as one teacher introduces and explains an image that represents the processes involved in a numeric problem that his students have been working on. This paper takes a micro-analytic approach to examine how the focus of attention shifts through what the teacher and students do and say in the…

  16. Tribological performances of new steel grades for hot stamping tools

    Science.gov (United States)

    Medea, F.; Venturato, G.; Ghiotti, A.; Bruschi, S.

    2017-09-01

    In the last years, the use of High Strength Steels (HSS) as structural parts in car body-in-white manufacturing has rapidly increased thanks to their favourable strength-to-weight ratio and stiffness, which allow a reduction of the fuel consumption to accommodate the new restricted regulations for CO2 emissions control. The survey of the technical and scientific literature shows a large interest in the development of different coatings for the blanks from the traditional Al-Si up to new Zn-based coatings and on the analysis of hard PVD, CVD coatings and plasma nitriding applied on the tools. By contrast, fewer investigations have been focused on the development and test of new tools steels grades capable to improve the wear resistance and the thermal properties that are required for the in-die quenching during forming. On this base, the paper deals with the analysis and comparison the tribological performances in terms of wear, friction and heat transfer of new tool steel grades for high-temperature applications, characterized by a higher thermal conductivity than the commonly used tools. Testing equipment, procedures as well as measurements analyses to evaluate the friction coefficient, the wear and heat transfer phenomena are presented. Emphasis is given on the physical simulation techniques that were specifically developed to reproduce the thermal and mechanical cycles on the metal sheets and dies as in the industrial practice. The reference industrial process is the direct hot stamping of the 22MnB5 HSS coated with the common Al-Si coating for automotive applications.

  17. Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

    Directory of Open Access Journals (Sweden)

    Asiyeh Amouei

    2018-02-01

    Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

  18. Assessing call centers’ success:

    Directory of Open Access Journals (Sweden)

    Hesham A. Baraka

    2013-07-01

    This paper introduces a model to evaluate the performance of call centers based on the Delone and McLean Information Systems success model. A number of indicators are identified to track the call center’s performance. Mapping of the proposed indicators to the six dimensions of the D&M model is presented. A Weighted Call Center Performance Index is proposed to assess the call center performance; the index is used to analyze the effect of the identified indicators. Policy-Weighted approach was used to assume the weights with an analysis of different weights for each dimension. The analysis of the different weights cases gave priority to the User satisfaction and net Benefits dimension as the two outcomes from the system. For the input dimensions, higher priority was given to the system quality and the service quality dimension. Call centers decision makers can use the tool to tune the different weights in order to reach the objectives set by the organization. Multiple linear regression analysis was used in order to provide a linear formula for the User Satisfaction dimension and the Net Benefits dimension in order to be able to forecast the values for these two dimensions as function of the other dimensions

  19. Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping

    OpenAIRE

    Chokshi, Prasun; Dashwood, R. J.; Hughes, Darren J.

    2017-01-01

    Because of demand for lower emissions and better crashworthiness, the use of hot stamped 22MnB5 boron steel has greatly increased in manufacturing of automobile components. However, for many applications it is required that only certain regions in hot stamped parts are fully hardened whereas other regions need be more ductile. The innovative process of tailored hot stamping does this by controlling the localized microstructures through tailored cooling rates by dividing the tooling into heate...

  20. Call Center Capacity Planning

    DEFF Research Database (Denmark)

    Nielsen, Thomas Bang

    is known as skills-based routing. It involves designing the routing policies in a way that results in customers receiving a desired service level such as the waiting time they experience. The emphasis of this thesis is on the design of these policies. The first paper, Queues with waiting time dependent...... infrastructure allows customers to be divided into classes depending on their requests or their value to the call center operator. The agents working in call centers can in the same way be split into groups based on their skills. The discipline of matching calls from different customer classes to agent groups...... service, introduces a novel approach to analyzing queueing systems. This involves using the waiting time of the first customer in line as the primary variable on which the analysis is based. The legacy approach has been to use the number of customers in queue. The new approach facilitates exact analysis...

  1. Transitant per Calle Mayor

    OpenAIRE

    Mestre Pérez, Rosanna

    2000-01-01

    RESUM Aquest treball és una lectura crítica de la pel.lícula Calle Mayor, dirigida per Juan Antonio Bardem en 1956, on pretenem analitzar de quina manera el film construeix un agosarat discurs de crítica social. Malgrat les dures limitacions extradiscursives en què la pel.lícula va veure la llum (censura oficial, empresonament del director durant el rodage...), Calle Mayor va aconseguir tractar allò del que no shi podia parlar (crítica sociopolítica) a través dun argument de...

  2. Gaming the Attention Economy

    OpenAIRE

    Estrada, Daniel; Lawhead, Jonathan

    2013-01-01

    The future of human computation (HC) benefits from examining tasks that agents already perform and designing environments to give those tasks computational significance. We call this natural human computation (NHC). We consider the possible future of NHC through the lens of Swarm!, an application under development for Google Glass. Swarm! motivates users to compute the solutions to a class of economic optimization problems by engaging the attention dynamics of crowds. We argue that anticipati...

  3. Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

    Science.gov (United States)

    Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

    2017-04-01

    The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

  4. CALLING AQUARIUM LOVERS...

    CERN Document Server

    2002-01-01

    CERN's anemones will soon be orphans. We are looking for someone willing to look after the aquarium in the main building, for one year. If you are interested, or if you would like more information, please call 73830. (The anemones living in the aquarium thank you in anticipation.)

  5. A call for surveys

    DEFF Research Database (Denmark)

    Bernstein, Philip A.; Jensen, Christian S.; Tan, Kian-Lee

    2012-01-01

    The database field is experiencing an increasing need for survey papers. We call on more researchers to set aside time for this important writing activity. The database field is growing in population, scope of topics covered, and the number of papers published. Each year, thousands of new papers ...

  6. Call 1 FAQ (ENG)

    International Development Research Centre (IDRC) Digital Library (Canada)

    Francine Sinzinkayo

    A collaborating organization is an institution that is not part of the core team managing the research project but contributes to activities of the project. Collaborating organization will not receive nor manage the project funds. 6. What is your definition of “third-party organizations” in this Call for proposals? A third party ...

  7. Call for Research

    International Development Research Centre (IDRC) Digital Library (Canada)

    Marie-Isabelle Beyer

    2014-10-03

    Oct 3, 2014 ... 5.Submission process. 6.Eligibility criteria. 7.Selection Process. 8. Format and requirements. 9.Evaluation criteria. 10.Country clearance requirements. 11. .... It is envisaged that through this call a single consortium will undertake 6-8 projects within a total budget of up to ... principle qualify for IDRC's support.

  8. Artificial Intelligence and CALL.

    Science.gov (United States)

    Underwood, John H.

    The potential application of artificial intelligence (AI) to computer-assisted language learning (CALL) is explored. Two areas of AI that hold particular interest to those who deal with language meaning--knowledge representation and expert systems, and natural-language processing--are described and examples of each are presented. AI contribution…

  9. To be called upon

    DEFF Research Database (Denmark)

    Kublitz, Anja

    2015-01-01

    When Danish Muslims explain what made them decide to travel to the Middle East and take up arms in the wake of the Arab Spring, they say that they were called upon. Displayed on videos on social media, women and sometimes children begged them to come to their rescue. In light of some of the respo...

  10. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  11. Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

    International Nuclear Information System (INIS)

    Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

    2013-01-01

    The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

  12. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    Directory of Open Access Journals (Sweden)

    Nosova Ekaterina

    2017-01-01

    Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

  13. Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Hattel, Jesper Henri

    2013-01-01

    In the present work, the deformation on micro-scale of PTFE flexible stamps for nanoimprint lithography is modeled. This is achieved via a combination of proper models for the constitutive behavior as well as the frictional conditions between the deforming PTFE stamp and the steel tool. The model...... was verified through an experiment, where a PTFE sheet was deformed by a steel sphere mounted in a tensile test machine. Good agreement between simulations and experimental results is found, both regarding force–displacement and corresponding principal strain measurements. As expected, applying the correct...... frictional behavior between PTFE and steel on micro-scale is shown to be of major importance in order to accurately simulate the strain field in the deformed PTFE stamp. © 2013 Elsevier B.V. All rights reserved...

  14. viStaMPS: The Application For Viewing And Manipulating StaMPS Results

    Science.gov (United States)

    Sousa, Joaquim; Sousa, Antonio; Magalhaes, Luis; Ruiz, Antonio

    2013-12-01

    viStaMPS (visual StaMPS) is a new visual application developed to enhance the visualization, manipulation and exportation of StaMPS results. The programmed application is developed in Matlab® through the Graphical User Interface (GUI) and no coding is required for running it, which avoids any programming language knowledge for standard uses. This tool integrates fully new features together with various scripts from StaMPS, allowing the generation of the desired plots/maps in a user-friendly interface. It is done by simply clicking some buttons or changing some parameters located in visual panels, instead of input commands in a prompt. Moreover, since it is written in Matlab, it gives the users the opportunity to access the data very easily and make their own modifications. Being a research tool, viStaMPS is continually under development and will count on the dynamism of its users to improve and/or add new features.

  15. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  16. ReCall

    OpenAIRE

    Lau, Wing Chi

    2012-01-01

    This document focuses on the choreographic process of ReCall, a dance-theatre work that employs choreographic devices through gesture and stories related to the tragedy of September 11th, 2001. The creative process included workshops in dance technique and devising with various collaborators and disciplines. This production was designed to kinesthetically engage the audience through shifting the expectations of the tradition of concert dance.

  17. Attention Retention

    DEFF Research Database (Denmark)

    Kravchenko, Mariia; Cass, Andrew Knox

    2017-01-01

    institution in technical subjects, but the methods are applicable to most teaching situations. The outcomes are, that paying attention to the process of recording existing lecture content leads to interactive video. This new content can be embedded in a structured lesson design and can greatly improve...

  18. Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

    Science.gov (United States)

    Schwingenschlögl, P.; Weldi, M.; Merklein, M.

    2017-09-01

    Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

  19. STAMPS: software tool for automated MRI post-processing on a supercomputer

    OpenAIRE

    Bigler, Don C.; Aksu, Yaman; Yang, Qing X.

    2009-01-01

    This paper describes a Software Tool for Automated MRI Post-processing (STAMP) of multiple types of brain MRIs on a workstation and for parallel processing on a supercomputer (STAMPS). This software tool enables the automation of nonlinear registration for a large image set and for multiple MR image types. The tool uses standard brain MRI post-processing tools (such as SPM, FSL, and HAMMER) for multiple MR image types in a pipeline fashion. It also contains novel MRI post-processing features....

  20. A compact system for large-area thermal nanoimprint lithography using smart stamps

    DEFF Research Database (Denmark)

    Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

    2008-01-01

    We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure f...... is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for mu m-scale features is demonstrated....

  1. Development and introduction of stamping technique for large-size laterals of NPP pipelines

    International Nuclear Information System (INIS)

    Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

    1984-01-01

    The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

  2. Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

    International Nuclear Information System (INIS)

    Zhang Fengxiang; Low, Hong Yee

    2008-01-01

    Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

  3. Internet-Based Training to Improve Preschool Playground Safety: Evaluation of the Stamp-in-Safety Programme

    Science.gov (United States)

    Schwebel, David C.; Pennefather, Jordan; Marquez, Brion; Marquez, Jessie

    2015-01-01

    Objective: Playground injuries result in over 200,000 US pediatric emergency department visits annually. One strategy to reduce injuries is improved adult supervision. The Stamp-in-Safety programme, which involves supervisors stamping rewards for children playing safely, has been demonstrated in preliminary classroom-based work to reduce child…

  4. Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Kailun Zheng

    2018-04-01

    Full Text Available The in-die quenching is a key stage in the hot stamping volume production chain which determines the post-formed strength of lightweight alloy components, tool life, and hot stamping productivity. In this paper, the performance of in-die quenching, reflected by the quenching efficiency (the time of work-piece held within stamping dies and die surface temperature during the simulated hot stamping process of AA6082, was experimentally and analytically investigated. A range of in-die quenching experiments were performed for different initial work-piece and die temperatures, quenching pressures, work-piece thickness, and die clearances, under hot stamping conditions. In addition, a one-dimensional (1D closed-form heat transfer model was used to calculate the die surface temperature evolution that is difficult to obtain during practical manufacture situations. The results have shown that the in-die quenching efficiency can be significantly increased by decreasing the initial work-piece and die temperatures. Die clearances are required to be designed precisely to obtain sufficiently high quenching rates and satisfying post-formed strength for hot-stamped panel components. This study systematically considered an extensive variety of influencing factors on the in-die quenching performance, which can provide practical guides for stamping tool designers and manufacture systems for hot-stamping volume production.

  5. Call 1 FAQ (FR)

    International Development Research Centre (IDRC) Digital Library (Canada)

    Francine Sinzinkayo

    Il faut porter une attention particulière aux allégations sur l'étiquette des vaccins commerciaux et aux données probantes réelles publiées sur l'efficacité et les attributs des vaccins commerciaux afin d'établir les données de référence appropriées aux fins de la quantification de l'importance de l'amélioration. Les équipes de ...

  6. A paradigm called magnetism

    CERN Document Server

    Dattagupta, Sushanta

    2008-01-01

    This book provides an overview of how diverse issues of Magnetism have implications for other areas of physics. Attention will be drawn to different aspects of many-body physics, which first appeared in Magnetism but have had deep impact in different branches of physics. Each of these aspects will be illustrated schematically and in terms of physical examples, chosen from multicritical phenomena, quantum phase transition, spin glasses, relaxation, phase ordering and quantum dissipation. A unique feature of this book is a unified and coherent discussion of magnetic phenomena, presented in a luc

  7. Flight calls and orientation

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Andersen, Bent Bach; Kropp, Wibke

    2008-01-01

      In a pilot experiment a European Robin, Erithacus rubecula, expressing migratory restlessness with a stable orientation, was video filmed in the dark with an infrared camera and its directional migratory activity was recorded. The flight overhead of migrating conspecifics uttering nocturnal...... flight calls was simulated by sequential computer controlled activation of five loudspeakers placed in a linear array perpendicular to the bird's migration course. The bird responded to this stimulation by changing its migratory course in the direction of that of the ‘flying conspecifics' but after about...

  8. FERMILAB: Call for physics

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Several hundred physicists attended a special Fermilab 'All Experimenter's Meeting' on November 20 to hear Director John Peoples call for new Tevatron Collider proposals for the years 2000-2005, when the new Main Injector will be complete. At the Tevatron proton-antiproton collider, the CDF and DO experiments are currently completing improvements for Run II to use the Tevatron when the Main Injector is complete later in this decade. New proposals would be aimed at a Collider Run III to follow these CDF and DO efforts

  9. Care and Calls

    DEFF Research Database (Denmark)

    Paasch, Bettina Sletten

    In Danish hospitals, nurses have been equipped with a mobile work phone to improve their availability and efficiency. On the phones nurses receive internal and external phone conversations, patient calls, and alarms from electronic surveillance equipment. For safety reasons the phones cannot...... reports the findings of an analysis of 144 hours of video data in which nurses were shadowed with a mobile video camera throughout their daily work. Nexus analysis and interaction analysis was used to examine how nurses manage interactions with patients when a mobile work phone rings during...

  10. Stamping an S on DMEK Donor Tissue to Prevent Upside-Down Grafts: Laboratory Validation and Detailed Preparation Technique Description.

    Science.gov (United States)

    Veldman, Peter B; Dye, Philip K; Holiman, Jeffrey D; Mayko, Zachary M; Sáles, Christopher S; Straiko, Michael D; Stoeger, Christopher G; Terry, Mark A

    2015-09-01

    To report endothelial cell loss (ECL) caused by a novel S-stamp preparation technique for Descemet membrane endothelial keratoplasty (DMEK). Six cadaveric human corneas were prepared for DMEK transplantation using a single standardized technique, including the application of a dry ink gentian violet S-stamp to the stromal side of Descemet membrane. Endothelial cell death was evaluated and quantified using computerized analysis of vital dye staining. ECL caused by the S-stamp was 0.6% (range 0.1%-1.0%), which comprised less than one-tenth of the total ECL caused by our preparation of the DMEK graft from the start to finish, including recovery, prestripping, S-stamping, and trephination (13.7% total ECL, range 9.9%-17.6%). Our novel S-stamp donor tissue preparation technique is intuitive to learn and holds the promise of preventing iatrogenic primary graft failure due to upside-down grafts without causing unacceptable increases in ECL.

  11. Aluminium Pneumoconiosis I. In Vitro Comparison of Stamped Aluminium Powders Containing Different Lubricating Agents and a Granular Aluminium Powder

    Science.gov (United States)

    Corrin, B.

    1963-01-01

    The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the formation of which is partially prevented in the stamping process by stearine and mineral oil. The reactivity of the flake-like stamped particles is also dependent on their large surface area per unit volume. The appearance of aluminium pneumoconiosis in Britain is explained by the introduction of mineral oil into the stamping industry for, in contrast to stearine, mineral oil permits the powder to react with water. The lung damage is believed to be caused by a soluble form of aluminium. PMID:14072616

  12. Call for volunteers

    CERN Multimedia

    2008-01-01

    CERN is calling for volunteers from all members of the Laboratory for organizing the two exceptional Open days.CERN is calling for volunteers from all members of the Laboratory’s personnel to help with the organisation of these two exceptional Open Days, for the visits of CERN personnel and their families on the Saturday and above all for the major public Open Day on the Sunday. As for the 50th anniversary in 2004, the success of the Open Days will depend on a large number of volunteers. All those working for CERN as well as retired members of the personnel can contribute to making this event a success. Many guides will be needed at the LHC points, for the activities at the surface and to man the reception and information points. The aim of these major Open Days is to give the local populations the opportunity to discover the fruits of almost 20 years of work carried out at CERN. We are hoping for some 2000 volunteers for the two Open Days, on the Saturday from 9 a.m. to ...

  13. MEDICAL SERVICE - URGENT CALLS

    CERN Multimedia

    Service Médical

    2000-01-01

    IN URGENT NEED OF A DOCTOR GENEVA: EMERGENCY SERVICES GENEVA AND VAUD 144 FIRE BRIGADE 118 POLICE 117 CERN FIREMEN 767-44-44 ANTI-POISONS CENTRE Open 24h/24h 01-251-51-51 Patient not fit to be moved, call family doctor, or: GP AT HOME: Open 24h/24h 748-49-50 AMG- Association Of Geneva Doctors: Emergency Doctors at home 07h-23h 322 20 20 Patient fit to be moved: HOPITAL CANTONAL CENTRAL 24 Micheli-du-Crest 372-33-11 ou 382-33-11 EMERGENCIES 382-33-11 ou 372-33-11 CHILDREN'S HOSPITAL 6 rue Willy-Donzé 372-33-11 MATERNITY 32 bvd.de la Cluse 382-68-16 ou 382-33-11 OPHTHALMOLOGY 22 Alcide Jentzer 382-33-11 ou 372-33-11 MEDICAL CENTRE CORNAVIN 1-3 rue du Jura 345 45 50 HOPITAL DE LA TOUR Meyrin 719-61-11 EMERGENCIES 719-61-11 CHILDREN'S EMERGENCIES 719-61-00 LA TOUR MEDICAL CENTRE 719-74-00 European Emergency Call 112   FRANCE: EMERGENCY SERVICES 15 FIRE BRIGADE 18 POLICE 17 CERN FIREMEN AT HOME 00-41-22-767-44-44 ...

  14. An Island Called Cuba

    Directory of Open Access Journals (Sweden)

    Jean Stubbs

    2011-06-01

    Full Text Available Review of: An Island Called Home: Returning to Jewish Cuba. Ruth Behar, photographs by Humberto Mayol. New Brunswick NJ: Rutgers University Press, 2007. xiii + 297 pp. (Cloth US$ 29.95 Fidel Castro: My Life: A Spoken Autobiography. Fidel Castro & Ignacio Ramonet. New York: Scribner/Simon & Schuster, 2008. vii + 724 pp. (Paper US$ 22.00, e-book US$ 14.99 Cuba: What Everyone Needs to Know. Julia E. Sweig. New York: Oxford University Press, 2009. xiv + 279 pp. (Paper US$ 16.95 [First paragraph] These three ostensibly very different books tell a compelling story of each author’s approach, as much as the subject matter itself. Fidel Castro: My Life: A Spoken Autobiography is based on a series of long interviews granted by the then-president of Cuba, Fidel Castro, to Spanish-Franco journalist Ignacio Ramonet. Cuba: What Everyone Needs to Know, by U.S. political analyst Julia Sweig, is one of a set country series, and, like Ramonet’s, presented in question/answer format. An Island Called Home: Returning to Jewish Cuba, with a narrative by Cuban-American anthropologist Ruth Behar and photographs by Cuban photographer Humberto Mayol, is a retrospective/introspective account of the Jewish presence in Cuba. While from Ramonet and Sweig we learn much about the revolutionary project, Behar and Mayol convey the lived experience of the small Jewish community against that backdrop.

  15. Call Attention to Rumors: Deep Attention Based Recurrent Neural Networks for Early Rumor Detection

    OpenAIRE

    Chen, Tong; Wu, Lin; Li, Xue; Zhang, Jun; Yin, Hongzhi; Wang, Yang

    2017-01-01

    The proliferation of social media in communication and information dissemination has made it an ideal platform for spreading rumors. Automatically debunking rumors at their stage of diffusion is known as \\textit{early rumor detection}, which refers to dealing with sequential posts regarding disputed factual claims with certain variations and highly textual duplication over time. Thus, identifying trending rumors demands an efficient yet flexible model that is able to capture long-range depend...

  16. Attention-Seeking Displays.

    Directory of Open Access Journals (Sweden)

    Szabolcs Számadó

    Full Text Available Animal communication abounds with extravagant displays. These signals are usually interpreted as costly signals of quality. However, there is another important function for these signals: to call the attention of the receiver to the signaller. While there is abundant empirical evidence to show the importance of this stage, it is not yet incorporated into standard signalling theory. Here I investigate a general model of signalling - based on a basic action-response game - that incorporates this searching stage. I show that giving attention-seeking displays and searching for them can be an ESS. This is a very general result and holds regardless whether only the high quality signallers or both high and low types give them. These signals need not be costly at the equilibrium and they need not be honest signals of any quality, as their function is not to signal quality but simply to call the attention of the potential receivers. These kind of displays are probably more common than their current weight in the literature would suggest.

  17. "We call ourselves marginalized"

    DEFF Research Database (Denmark)

    Jørgensen, Nanna Jordt

    2014-01-01

    In recent decades, indigenous knowledge has been added to the environmental education agenda in an attempt to address the marginalization of non-western perspectives. While these efforts are necessary, the debate is often framed in terms of a discourse of victimization that overlooks the agency o...... argue that researchers not only need to pay attention to how certain voices are marginalized in Environmental Education research and practice, but also to how learners as agents respond to, use and negotiate the marginalization of their perspectives.......In recent decades, indigenous knowledge has been added to the environmental education agenda in an attempt to address the marginalization of non-western perspectives. While these efforts are necessary, the debate is often framed in terms of a discourse of victimization that overlooks the agency...

  18. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    Science.gov (United States)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-03-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation.

  19. Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

    NARCIS (Netherlands)

    Karanikas, Nektarios; Schwarz, M; Harfmann, J

    2017-01-01

    A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

  20. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2012-12-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  1. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-02-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  2. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    International Nuclear Information System (INIS)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-01-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

  3. 41 CFR 101-25.103-4 - Disposition of promotional materials, trading stamps, or bonus goods.

    Science.gov (United States)

    2010-07-01

    ..., arrange for transfer of promotional materials, trading stamps, or bonus goods, without reimbursement in...) The contract does not contain a price reduction clause, or (2) The contractor refuses to grant a price... promotional items as a price reduction, and (4) The procuring or receiving agency has no practical use for the...

  4. Impacting Mediators of Change for Physical Activity among Elderly Food Stamp Recipients

    Science.gov (United States)

    Dye, Cheryl J.; Williams, Joel E.; Kemper, Karen A.; McGuire, Francis A.; Aybar-Damali, Begum

    2012-01-01

    A multidisciplinary team developed and pilot-tested a curriculum, delivered by trained lay educators, to increase self-efficacy for physical activity among elderly food stamp recipients. Curriculum development was guided by a comprehensive literature review. Process evaluation was used to revise the curriculum and to assess lay educator training…

  5. 75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

    Science.gov (United States)

    2010-01-29

    .... Several commenters suggested that the Department amend the current regulations to clarify that human trafficking victims and certain family members are eligible for food stamps to ensure that victims and their...). The guidance reflects the requirements under the ``Trafficking Victims Protection Act of 2000'' (Pub...

  6. Fabrication of microlens array on silicon surface using electrochemical wet stamping technique

    Science.gov (United States)

    Lai, Lei-Jie; Zhou, Hang; Zhu, Li-Min

    2016-02-01

    This paper focuses on the fabrication of microlens array (MLA) on silicon surface by taking advantage of a novel micromachining approach, the electrochemical we stamping (E-WETS). The E-WETS allows the direct imprinting of MLA on an agarose stamp into the substrate through a selective anodic dissolution process. The pre-patterned agarose stamp can direct and supply the solution preferentially on the contact area between the agarose stamp and the substrate, to which the electrochemical reaction is confined. The anodic potential vs. saturated calomel electrode is optimized and 1.5 V is chosen as the optimum value for the electrochemical polishing of p-Si. A refractive MLA on a PMMA mold is successfully transferred onto the p-Si surface. The machining deviations of the fabricated MLA from those on the mold are 0.44% in diameter and 2.1% in height respectively, and the machining rate in HF is around 1.1 μm/h. The surface roughness of the fabricated MLA is less than 12 nm owing to the electrochemical polishing process. The results demonstrate that E-WETS is a promising approach to fabricate MLA on p-Si surface with high accuracy and efficiency.

  7. Honoring Avicenna, the great Persian physician on the world's postage stamps.

    Science.gov (United States)

    Afshar, Ahmadreza

    2010-09-01

    Many nations are indebted to Avicenna (Ibn-Sina) for their scientific progressions and civilization. Many countries in the Middle East, Africa, and Europe have honored Avicenna, the great Persian scientist, by depicting his vignette on their postage stamps. The symbolic value of Avicenna has been chosen to commemorate scientific occasions, achievements and anniversaries, which represents the ultimate performance of conscious honoring.

  8. 42 CFR 71.3 - Designation of yellow fever vaccination centers; Validation stamps.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Designation of yellow fever vaccination centers... Designation of yellow fever vaccination centers; Validation stamps. (a) Designation of yellow fever vaccination centers. (1) The Director is responsible for the designation of yellow fever vaccination centers...

  9. Food Stamp and School Lunch Programs Alleviate Food Insecurity in Rural America. Fact Sheet

    Science.gov (United States)

    Smith, Kristin; Savage, Sarah

    2007-01-01

    The Food Stamp and the National School Lunch Programs play a vital role in helping poor, rural Americans obtain a more nutritious diet and alleviate food insecurity and hunger. This fact sheet looks at the extent to which rural America depends on these programs and describes characteristics of beneficiaries of these federal nutrition assistance…

  10. Studying the Solar System Can Be More than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-01-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

  11. Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

    NARCIS (Netherlands)

    Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

    2007-01-01

    The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

  12. Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

    2007-01-01

    ,4-ethylenedioxythiophene) (PEDOT). The agarose stamping produced 50 μm wide conducting lines with high spatial fidelity. The deactivation agent was found to cause some degradation of the remaining conducting lines, as revealed by a stronger increase in resistance upon straining compared to the pristine polymer material...

  13. Care and calls

    DEFF Research Database (Denmark)

    Paasch, Bettina Sletten

    is nexus analysis, which allows this thesis to connect the situated interactions recorded on video with the social, cultural, and historical currents influencing them. To zoom in on the situated accomplishment of interactions, nexus analysis is complemented with insights and methods from ethnomethodology......, patients, and mobile work phones. These data were supplemented with participant observations, interviews, photos, documents, and webpages. In the process of logging the video data, only the persons participating in events and the actions being performed were coded. Seven cases in which a single nurse...... they are telephoned during interactions with patients are not universal. Indeed different strategies have evolved in other hospital departments. Not only does this thesis contribute insights into the way nurses manage phone calls during interactions with patients, but by subscribing to a growing body of embodied...

  14. MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

    Science.gov (United States)

    Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

    2014-01-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

  15. Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

    Science.gov (United States)

    Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

    2013-12-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

  16. Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

    Science.gov (United States)

    Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

    2015-01-01

    Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

  17. Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

    International Nuclear Information System (INIS)

    Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

    2007-01-01

    It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

  18. Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

    International Nuclear Information System (INIS)

    Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

    2012-01-01

    We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

  19. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    Science.gov (United States)

    Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

    2016-08-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

  20. Combined Randomized-Local Hough Transform versus UpWrite Transform in stamp detection

    Directory of Open Access Journals (Sweden)

    Daniela Tondini

    2003-10-01

    Full Text Available The conventional Hough Transform used for detection of objects with known shape and size has proved its robustness. One typical task for this transform can be the detection of stamp(s on an envelope. Unfortunately, the Hough Transform has an important drawback: the heavy computational effort and, as consequence, a big execution time. This paper introduces a variant of Hough Transform that speeds up the process. One important aid is given by a filtering step based on a fast analysis of a rough deformation model. This method is a combination of Randomized and Local Hough Transform. Experiments were made comparing the modified Hough Transform approach with the UpWrite Transform and they proved that the first approach preserves the quality of the Hough Transform results at a higher speed.

  1. Influence of operating parameters on coke end temperature in stamp charged batteries

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, U.S.; Sarkar, P.; Deshpande, D.P. [Tata Steel, Jamshedpur (India)

    2004-07-01

    Coke end temperature (CET) indicates the final temperature of coke mass after pushing it out from the oven and before quenching and thus is an indicator of the preparedness of the coke. Analysis of plant data from stamp charged batteries at Tata Steel show that it depends on coal blend characteristics and battery conditions. Increased input coal ash, its crushing fineness and volatile matters increases but the moisture decreases it. The heating rate, battery and regenerator temperatures all increase the coke end temperature. The present paper documents that observations on parameters influencing coke end temperature under stamp charged conditions and attempts to hypothesise the possible explanation for the results obtained. 3 refs., 10 figs., 2 tabs.

  2. Modeling and Simulating Material Behavior during Hot Blank - Cold Die (HB-CD) Stamping of Aluminium Alloy Sheets

    Science.gov (United States)

    Zhang, Nan; Abu-Farha, Fadi

    2016-08-01

    Hot blank - cold die (HB-CD) stamping, non-isothermal hot stamping, of aluminium alloy sheets offers great opportunities for high production rates at low cost, while overcoming limited material formability issues. Yet developing an accurate model that can describe the complex material behavior over the wide ranging conditions of HB-CD stamping (temperatures ranging between 25 and 350 °C) is challenging. Moreover, validation of the developed models under transient conditions is problematic. This work presents he results of a comprehensive characterization, material modeling, FE simulation and experimental validation effort to capture the behavior of an aluminium alloy sheet during HB-CD stamping. In particular, we highlight the integration between temperature measurements (thermography) and strain measurements (digital image correlation) for the accurate validation of model predictions of non-isothermal material deformation.

  3. 75 FR 11913 - Chrysler, LLC; Warren Stamping Plant, Including On-Site Leased Workers From Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... firm. The workers produce stamping parts for automobiles. New information shows that workers leased... under the control of the subject firm to be considered leased workers. Based on these findings, the...

  4. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    International Nuclear Information System (INIS)

    Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-01-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

  5. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Energy Technology Data Exchange (ETDEWEB)

    Altun, Ali Ozhan [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Jeong, Jun-Ho [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Rha, Jong-Joo [Surface Technology Research Center, Korea Institute of Machinery and Materials, 66 Sangnam-Dong, Changwon-Shi, Kyungnam-Do (Korea, Republic of); Kim, Ki-Don [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Lee, Eung-Sug [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of)

    2007-11-21

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75{sup 0}. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  6. A rapid co-culture stamping device for studying intercellular communication

    OpenAIRE

    Amin Hassanzadeh-Barforoushi; Jonathan Shemesh; Nona Farbehi; Mohsen Asadnia; Guan Heng Yeoh; Richard P. Harvey; Robert E. Nordon; Majid Ebrahimi Warkiani

    2016-01-01

    Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two a...

  7. Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses

    OpenAIRE

    Daehn, G. S.; Shang, J.; Vohnout, V. J.

    2004-01-01

    Stamping failures consist of, broadly speaking, either tearing (excessive local strain energy) or wrinkling (insufficient or inappropriate local strain energy). Good parts are produced when the strain energy or plastic work is effectively distributed during the forming process such that tears and wrinkles are eliminated. The process window framed by tearing and wrinkling limits can be rather small for some materials, notably aluminum alloys. At present, there are no established methods of dir...

  8. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    OpenAIRE

    Luan, X; Liu, X; Fang, H; Ji, K; El Fakir, O; Wang, L

    2016-01-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast ir...

  9. Anisotropic behaviour law for sheets used in stamping: A comparative study of steel and aluminium

    OpenAIRE

    Sinou, Jean-Jacques; Macquaire, Bruno

    2008-01-01

    International audience; For a car manufacturer, reducing the weight of vehicles is an obvious aim. Replacing steel by aluminium moves towards that goal. Unfortunately, aluminium's stamping numerical simulation results are not yet as reliable as those of steel. Punch-strength and spring-back phenomena are not correctly described. This study on aluminium validates the behaviour law Hill 48 quadratic yield criterion with both isotropic and kinematic hardening. It is based on the yield surface an...

  10. Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

    Directory of Open Access Journals (Sweden)

    Aizawa Tatsuhiko

    2016-01-01

    Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

  11. Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

    Science.gov (United States)

    Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

    2017-09-01

    The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

  12. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Science.gov (United States)

    Ozhan Altun, Ali; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-11-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70 86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75°. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  13. Validation of the stamping method for CaSO{sub 4}:RE + Teflon® pellets production

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br, E-mail: lcrodri@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    The IPEN method for the CaSO{sub 4}:RE + Teflon® production, developed and patented at the Dosimetric Materials Laboratory - LMD/IPEN in the earlier 1980's, is highly time-demanding, so that the use of the stamping method, already widely industrially applied, would enhance the CaSO{sub 4}:RE + Teflon® pellets production. Thus, validating the stamping method, by comparing the dosimetric properties of a batch of pellets produced by each method, became a must. The stamped batch presents the same mean non-irradiated signals either after sintering or annealing while IPEN batch mean non-irradiated signals vary in 23%. The mean TL signal after irradiation was about 50 nC, but the standard deviation varies from 20% to 33% for IPEN batch and keeps in 10% for the stamped batch. 24 h after the irradiation, the TL signal decreased to about 35 nC, with no differences in IPEN batch standard deviation and a decrease to 5% in stamped batch standard deviation, for the five performed essays. Calibration curves present a linear behavior over the entire studied dose range and the same coefficients for both methods, however, the uncertainties in the coefficients determined to the calibration curve obtained with stamped pellets are significantly smaller, leading to a more precise dose determination. This results show that the stamping method produces more homogeneous batches, with pellets that maintain the dosimetric characteristics of the detectors produced by IPEN method, in such a way that the stamping method can substitute with advantages the IPEN method in the CaSO{sub 4}:RE + Teflon® dosimetric pellets production. (author)

  14. Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

    Science.gov (United States)

    Zhu, Bin; Liu, Zhuang; Wang, Yanan; Rolfe, Bernard; Wang, Liang; Zhang, Yisheng

    2018-04-01

    Application of quenching and partitioning process in hot stamping has proven to be an effective method to improve the plasticity of advanced high-strength steels (AHSSs). In this study, the hot stamping and partitioning process of advanced high-strength steel 30CrMnSi2Nb is investigated with a hot stamping mold. Given the specific partitioning time and temperature, the influence of quenching temperature on the volume fraction of microstructure evolution and mechanical properties of the above steel are studied in detail. In addition, a model for quenching and partitioning process is applied to predict the carbon diffusion and interface migration during partitioning, which determines the retained austenite volume fraction and final properties of the part. The predicted trends of the retained austenite volume fraction agree with the experimental results. In both cases, the volume fraction of retained austenite increases first and then decreases with the increasing quenching temperature. The optimal quenching temperature is approximately 290 °C for 30CrMnSi2Nb with the partition conditions of 425 °C and 20 seconds. It is suggested that the model can be used to help determine the process parameters to obtain retained austenite as much as possible.

  15. Fabrication of 3D high aspect ratio PDMS microfluidic networks with a hybrid stamp.

    Science.gov (United States)

    Kung, Yu-Chun; Huang, Kuo-Wei; Fan, Yu-Jui; Chiou, Pei-Yu

    2015-04-21

    We report a novel methodology for fabricating large-area, multilayer, thin-film, high aspect ratio, 3D microfluidic structures with through-layer vias and open channels that can be bonded between hard substrates. It is realized by utilizing a hybrid stamp with a thin plastic sheet embedded underneath a PDMS surface. This hybrid stamp solves an important edge protrusion issue during PDMS molding while maintaining necessary stamp elasticity to ensure the removal of PDMS residues at through-layer regions. Removing edge protrusion is a significant progress toward fabricating 3D structures since high aspect ratio PDMS structures with flat interfaces can be realized to facilitate multilayer stacking and bonding to hard substrates. Our method also allows for the fabrication of 3D deformable channels, which can lead to profound applications in electrokinetics, optofluidics, inertial microfluidics, and other fields where the shape of the channel cross section plays a key role in device physics. To demonstrate, as an example, we have fabricated a microfluidic channel by sandwiching two 20 μm wide, 80 μm tall PDMS membranes between two featureless ITO glass substrates. By applying electrical bias to the two ITO substrates and pressure to deform the thin membrane sidewalls, strong electric field enhancement can be generated in the center of a channel to enable 3D sheathless dielectrophoretic focusing of biological objects including mammalian cells and bacteria at a flow speed up to 14 cm s(-1).

  16. Prevention of crack in stretch flanging process using hot stamping technique

    Science.gov (United States)

    Syafiq, Y. Mohd; Hamedon, Z.; Azila Aziz, Wan; Razlan Yusoff, Ahmad

    2017-10-01

    Demand for enhancing of passenger safety as well as weight reduction of automobiles has increased the use of high strength steel sheets. As a sheet metal is a lightweight having high strength is suitable for producing automotive parts such as white body panel. The stretch flanging of the high strength steel sheet is a problem due to high springback and easy to crack. This study uses three methods to stretch flange the sheets; using lubricants, shear-edge polishing and hot stamping. The effectiveness of these methods will be measured by comparing the flange length of each methods can achieved. For stretch flange with lubricant and polished sheared edge, the flange length failed to achieve the target 15 mm while hot stamping improved the formability of the sheet and preventing the occurrence of the springback and crack. Hot stamping not only improved formability of the sheet but also transformed the microstructure into martensite thus improve the hardness and the strength of the sheet after been quenched with the dies.

  17. Conformal contact and pattern stability of stamps used for soft lithography

    Science.gov (United States)

    Bietsch, Alexander; Michel, Bruno

    2000-10-01

    Patterning in soft lithography techniques such as microcontact printing or light-coupling mask lithography is mediated by surface topographical patterns of elastomeric stamps: intimate contact with the substrate is achieved locally at the protruding areas, whereas a gap remains between the substrate and recessed zones. This principle challenges the properties of the stamp, especially when printing high-resolution or extreme aspect-ratio patterns with high accuracy. On the one hand, the stamp must be soft enough to enable conformal contact with the substrate, which means that it must adapt elastically without leaving voids created by the natural roughness of the substrate. On the other hand, a precise definition of micropatterns requires a rigid material. In this article, we analyze the conditions of elasticity, roughness, and energy of adhesion to establish conformal contact between an elastomer and the target surface. Furthermore, we address questions of replication accuracy and evaluate local elastic deformation induced by normal forces using model calculations for simple pattern geometries. Pressure applied during contact leads to a sagging or collapse of the unsupported areas. We discuss implications on both material and pattern design that allow spontaneous propagation of conformal contact while inhibiting the spreading of collapse.

  18. On the die face design for stamping an automotive engine hood

    Science.gov (United States)

    Chen, Ming-Zhi; Wang, Shi-Wei; Lin, Ching-I.; Chen, Fuh-Kuo

    2017-09-01

    Since the engine hood is mainly manufactured in the drawing operation, the die addendum design is the key to the success of manufacturing a defect free product. In this study, the existing die addendum designs corresponding to those engine hoods were reviewed and the design parameters were constructed. The preliminary study was then performed to examine the influences of the stamping die angle, binder surface shape, and die open line shape on the defects occurred in the part. Based on the simulation results, the optimum design for the die addendum face was then investigated and a systematic design guideline was proposed. In order to validate the proposed design guideline, actual engine hoods were stamped according to the finite element analysis and the production part shapes, thickness distributions, and the stretch at the central region were compared with those obtained from the finite element simulations. The consistent agreement between the product parts and the simulation results confirms the validity of the design guideline proposed in the present study for stamping an engine hood.

  19. Evaluation of resistless Ga+ beam lithography for UV NIL stamp fabrication

    Science.gov (United States)

    Rumler, M.; Fader, R.; Haas, A.; Rommel, M.; Bauer, A. J.; Frey, L.

    2013-09-01

    This paper presents an alternative rapid prototyping approach for the fabrication of stamps for UV nanoimprint lithography. In this process, areas implanted with gallium serve as an etch mask for the dry etching of quartz. The implantation is performed using a focused ion beam system. To avoid charging of the quartz substrate the use of thin layers of chromium or carbon on the quartz substrate has been evaluated. The resulting quartz structures exhibit very smooth surfaces after dry etching, if the implantation dose is high enough to form a stable etch mask. Furthermore, anisotropic etching could be realized by optimization of a quartz etching process involving C4F8 and O2 after the use of resistless Ga+ beam lithography. Finally, imprints into a UV curing resist are performed successfully with the manufactured stamps, proving that the presence of Ga rich areas on the stamp is not detrimental to the curing of the resist or the functionality of the anti-sticking layer.

  20. Call Centre- Computer Telephone Integration

    Directory of Open Access Journals (Sweden)

    Dražen Kovačević

    2012-10-01

    Full Text Available Call centre largely came into being as a result of consumerneeds converging with enabling technology- and by the companiesrecognising the revenue opportunities generated by meetingthose needs thereby increasing customer satisfaction. Regardlessof the specific application or activity of a Call centre, customersatisfaction with the interaction is critical to the revenuegenerated or protected by the Call centre. Physical(v, Call centreset up is a place that includes computer, telephone and supervisorstation. Call centre can be available 24 hours a day - whenthe customer wants to make a purchase, needs information, orsimply wishes to register a complaint.

  1. On-call work and health: a review

    Directory of Open Access Journals (Sweden)

    Botterill Jackie S

    2004-12-01

    Full Text Available Abstract Many professions in the fields of engineering, aviation and medicine employ this form of scheduling. However, on-call work has received significantly less research attention than other work patterns such as shift work and overtime hours. This paper reviews the current body of peer-reviewed, published research conducted on the health effects of on-call work The health effects studies done in the area of on-call work are limited to mental health, job stress, sleep disturbances and personal safety. The reviewed research suggests that on-call work scheduling can pose a risk to health, although there are critical gaps in the literature.

  2. Attention, Joint Attention, and Social Cognition

    OpenAIRE

    Mundy, Peter; Newell, Lisa

    2007-01-01

    Before social cognition there is joint processing of information about the attention of self and others. This joint attention requires the integrated activation of a distributed cortical network involving the anterior and posterior attention systems. In infancy, practice with the integrated activation of this distributed attention network is a major contributor to the development of social cognition. Thus, the functional neuroanatomies of social cognition and the anterior–posterior attention ...

  3. Molecular dynamics study on the effects of stamp shape, adhesive energy, and temperature on the nanoimprint lithography process

    International Nuclear Information System (INIS)

    Kang, Ji-Hoon; Kim, Kwang-Seop; Kim, Kyung-Woong

    2010-01-01

    Molecular dynamics simulations of nanoimprint lithography (NIL) were performed to investigate the effects of three critical process parameters in NIL: stamp shape, adhesive energy between the stamp and polymer film, and imprint temperature. The proposed simulation model of the NIL process consists of an amorphous SiO 2 stamp with a line pattern, an amorphous poly(methylmethacrylate) film, and a Si substrate under the periodic boundary condition in the horizontal direction to simulate a real NIL process imprinting periodical line patterns. The behavior of polymer deformation and the effects of adhesion on pattern transfer were investigated by observing the deformation process, calculating the imprint and separation forces, and analyzing the density and stress distribution inside the polymer film. In addition, their dependency on the process parameters is also discussed with reference to the changes in pattern shape, adhesive energy between the stamp and polymer atoms, and imprint temperature of the polymer film. During the imprint process, the rectangular pattern shows inferior cavity filling and higher stress concentration compared to trapezoidal and triangular patterns because it requires much larger flow and deformation of the polymer film. Low imprint temperature also produces high stress concentration and large imprint force due to the lower fluidity of polymer film. In the separation process, the rectangular pattern generates the largest separation force and causes the most serious defects of the transferred pattern and even the polymer film, while the triangular pattern shows the most satisfactory pattern transfer. In addition, the adhesive energy between the stamp and the polymer film also strongly influences the adhesion between the stamp and the polymer film. Low adhesive energy reduces the separation force of the stamp and transferred pattern defects, and therefore enhances the quality of pattern transfer.

  4. StaMPS Improvement for Deformation Analysis in Mountainous Regions: Implications for the Damavand Volcano and Mosha Fault in Alborz

    Directory of Open Access Journals (Sweden)

    Sanaz Vajedian

    2015-06-01

    Full Text Available Interferometric Synthetic Aperture Radar (InSAR capability to detect slow deformation over terrain areas is limited by temporal decorrelation, geometric decorrelation and atmospheric artefacts. Multitemporal InSAR methods such as Persistent Scatterer (PS-InSAR and Small Baseline Subset (SBAS have been developed to deal with various aspects of decorrelation and atmospheric problems affecting InSAR observations. Nevertheless, the applicability of both PS-InSAR and SBAS in mountainous regions is still challenging. Correct phase unwrapping in both methods is hampered due to geometric decorrelation in particular when using C-band SAR data for deformation analysis. In this paper, we build upon the SBAS method implemented in StaMPS software and improved the technique, here called ISBAS, to assess tectonic and volcanic deformation in the center of the Alborz Mountains in Iran using both Envisat and ALOS SAR data. We modify several aspects within the chain of the processing including: filtering prior to phase unwrapping, topographic correction within three-dimensional phase unwrapping, reducing the atmospheric noise with the help of additional GPS data, and removing the ramp caused by ionosphere turbulence and/or orbit errors to better estimate crustal deformation in this tectonically active region. Topographic correction is done within the three-dimensional unwrapping in order to improve the phase unwrapping process, which is in contrast to previous methods in which DEM error is estimated before/after phase unwrapping. Our experiments show that our improved SBAS approach is able to better characterize the tectonic and volcanic deformation in the center of the Alborz region than the classical SBAS. In particular, Damavand volcano shows an average uplift rate of about 3 mm/year in the year 2003–2010. The Mosha fault illustrates left-lateral motion that could be explained with a fault that is locked up to 17–18 km depths and slips with 2–4 mm

  5. The difficult medical emergency call

    DEFF Research Database (Denmark)

    Møller, Thea Palsgaard; Kjærulff, Thora Majlund; Viereck, Søren

    2017-01-01

    BACKGROUND: Pre-hospital emergency care requires proper categorization of emergency calls and assessment of emergency priority levels by the medical dispatchers. We investigated predictors for emergency call categorization as "unclear problem" in contrast to "symptom-specific" categories and the ......BACKGROUND: Pre-hospital emergency care requires proper categorization of emergency calls and assessment of emergency priority levels by the medical dispatchers. We investigated predictors for emergency call categorization as "unclear problem" in contrast to "symptom-specific" categories...... and the effect of categorization on mortality. METHODS: Register-based study in a 2-year period based on emergency call data from the emergency medical dispatch center in Copenhagen combined with nationwide register data. Logistic regression analysis (N = 78,040 individuals) was used for identification...

  6. SINCERITIES: Inferring gene regulatory networks from time-stamped single cell transcriptional expression profiles.

    Science.gov (United States)

    Papili Gao, Nan; Ud-Dean, S M Minhaz; Gandrillon, Olivier; Gunawan, Rudiyanto

    2017-09-14

    Single cell transcriptional profiling opens up a new avenue in studying the functional role of cell-to-cell variability in physiological processes. The analysis of single cell expression profiles creates new challenges due to the distributive nature of the data and the stochastic dynamics of gene transcription process. The reconstruction of gene regulatory networks (GRNs) using single cell transcriptional profiles is particularly challenging, especially when directed gene-gene relationships are desired. We developed SINCERITIES (SINgle CEll Regularized Inference using TIme-stamped Expression profileS) for the inference of GRNs from single cell transcriptional profiles. We focused on time-stamped cross-sectional expression data, commonly generated from transcriptional profiling of single cells collected at multiple time points after cell stimulation. SINCERITIES recovers directed regulatory relationships among genes by employing regularized linear regression (ridge regression), using temporal changes in the distributions of gene expressions. Meanwhile, the modes of the gene regulations (activation and repression) come from partial correlation analyses between pairs of genes. We demonstrated the efficacy of SINCERITIES in inferring GRNs using in silico time-stamped single cell expression data and single cell transcriptional profiles of THP-1 monocytic human leukemia cells. The case studies showed that SINCERITIES could provide accurate GRN predictions, significantly better than other GRN inference algorithms such as TSNI, GENIE3 and JUMP3. Moreover, SINCERITIES has a low computational complexity and is amenable to problems of extremely large dimensionality. Finally, an application of SINCERITIES to single cell expression data of T2EC chicken erythrocytes pointed to BATF as a candidate novel regulator of erythroid development. The MATLAB and R version of SINCERITIES is freely available from the following websites: http://www.cabsel.ethz.ch/tools/sincerities.html and

  7. Studying the Solar System Can Be More Than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-04-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly could consist mostly of showing images and reporting facts, but by using observations that can be made from images and also data and other known facts about the objects, instruction on solar system topics can be more conceptual, involving just as much inquiry and discovery as any area of astronomy or physics.

  8. Analysis of the Phenomenon of Speculative Trading in One of its Basic Manifestations:. Postage Stamp Bubbles

    Science.gov (United States)

    Roehner, B.; Sornette, D.

    We document and analyze the empirical facts concerning one of the clearest evidence of speculation in financial trading as observed in the postage collection stamp market. We unravel some of the mechanisms of speculative behavior which emphasize the role of fancy and collective behavior. In our conclusion, we propose a classification of speculative markets based on two parameters, namely the amplitude of the price peak and a second parameter that measures its "sharpness". This study is offered to anchor modeling efforts to realistic market constraints and observations.

  9. Time stamp generation with inverse FIR filters for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Namias, Mauro

    2009-01-01

    Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

  10. Use of atomic force microscopy in the forensic application of chronological order of toners and stamping inks in questioned documents.

    Science.gov (United States)

    Kang, Tae-Yi; Lee, Joong; Park, Byung-Wook

    2016-04-01

    This paper describes the application of the atomic force microscopy (AFM) as a nano-indentation method and introduces a new method of identifying the chronological order of the application of the toner and stamping ink on the surface of documents by removing either of them. Various toners were used as samples for the AFM nano-indentation method. The chronological order of the application of the toner and stamping ink with either the toner placed over the stamping ink or the stamping ink placed over the toner, could be identified, regardless of the kinds of toners made by various companies. This paper provides the new approach for physically removing the toner and checking the material below it to identify questioned documents, which allows the method to be used to appraise documents forensically. Blind testing has shown that the method to analyze the chronological order of toner-printed documents and the seal stamping on them could accurately identify the order in all samples, while minimizing damage to the samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  11. Your Wake-Up Call

    Science.gov (United States)

    ... Navigation Bar Home Current Issue Past Issues Your Wake-Up Call Past Issues / Summer 2007 Table of ... months old. Although health care professionals don't know what causes SIDS, they do know ways to ...

  12. (the so called limiting resource).

    Indian Academy of Sciences (India)

    An asymmetry in response to rainfall is not surprising in the light of Liebig's law of the minimum, which says that the yield of a crop is determined by the scarcest resource (the so called limiting resource).

  13. When to Call Your Pediatrician

    Science.gov (United States)

    ... Medical Home Health Insurance Pediatric Specialists Family Dynamics Media Work & ... Page Content Article Body Is it OK to call my child's pediatrician even if I'm not sure my child is sick? Routine ...

  14. New method for springback compensation for the stamping of sheet metal components

    Science.gov (United States)

    Birkert, A.; Hartmann, B.; Straub, M.

    2017-09-01

    The need for car body structures of higher strength and at the same time lower weight results in serious challenges for the stamping process. Especially the use of high strength steel and aluminium sheets is causing growing problems with regard to elastic springback. To produce accurate parts the stamping dies must be adjusted more or less by the amount of the springback in the opposite direction. For this purpose well-known software solutions use the Displacement Adjustment Method or algorithms which are closely based on that method. A crucial issue of this method is that the generated die surfaces deviate from those of the target geometry with regard to surface area. A new Physical Compensation Method has been developed and validated which takes geometrical nonlinearity into account and creates compensated die geometries with equal-in-area die surfaces. In contrast to the standard mathematical/geometrical approach, the adjusted geometry is generated by a physical approach, which makes use of the virtual part stiffness. Hereby the target geometry is being deformed mechanically in a virtual process based on the springback simulation results by applying virtual forces in an additional elastic simulation. By doing so better part dimensions can be obtained in less tool optimization loops.

  15. A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels

    Science.gov (United States)

    Şimşir, C.; Çetin, B.; Efe, M.; Davut, K.; Bayramin, B.

    2017-09-01

    Recent studies showed that, during stamping of high strength steels at industrially relevant production rates, local temperature in the blank may rise up to 200°C - 300°C due to deformation heating. Moreover, die temperature may also rise up to 100°C - 150°C for progressive stamping dies. Based on the common assumption that the blank softens as the temperature increases, thermal softening creates a margin in Forming Limit Diagram (FLD) and therefore the FLD determined at room temperature can safely be used for those cases. In this article, the validity of this assumption on DP590 steel is questioned by high temperature tensile tests (RT - 300°C) at various strain rates (10-3 s-1 - 1 s-1). The results indicated a decrease both in uniform and total elongation in 200°C - 300°C range together with several other symptoms of Dynamic Strain Aging (DSA) at all strain rates. Concurrent with the DSA, the simulated FLD confirms the lower formability at high temperature and strain rates. Thus, it is concluded FLD determined at RT may not be valid for the investigated steels.

  16. Predication of coke strength from textural analysis of stamp charged coke supported by coal petrography

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, R.; Dash, P.S.; Chakraborty, D.; Banerjee, P.K.; Kumar, D. [Tata Steel, Jamshedpur (India)

    2005-07-01

    Materials science tells us that defects or flaws in a solid material control the mechanical behaviour of that material. Similarly, in a coke, its strength is associated with the microstructure and texture. Optical microscopy is the most appropriate method for measuring these features. Attempts were made to correlate different types of textures with the strength of stamp charged coke at Tata Steel. The studies revealed that anisotropic carbon is less reactive to carbon dioxide compared to isotropic carbon. There may be two reasons for this: a lower surface area of the carbon available for reaction; the intrinsic reactivity may be lower for molecules which constitute anisotropic carbon. The strength after reaction depends on its anisotropic texture - the smaller size mosaic texture contributes to higher post strength. There are very few reports about use of micro textural analysis to predict cold strength of coke. Test results show that there exists an influence of isotropic carbon on M{sub 10} index. With an increase in isotropic texture, the M{sub 10} index deteriorates. The performance of coke in blast furnaces may be improved by improving room temperature and high temperature strength of coke by selecting coal with higher vitrinite distribution in the present blend through the stamp charging route. 18 refs., 12 figs., 3 tabs.

  17. Virtual method for the determination of an optimum thermal design of hot stamping tools

    Science.gov (United States)

    Weiß, W.; Koplenig, M.; Alb, M.; Graf, J.

    2016-11-01

    This work presents a new virtual method for the optimised thermal design of hot stamping tools. It provides optimal positions of the tool's tempering ducts with respect to the average working temperature and its homogeneous distribution on the surface of a tool. It consists of a specific procedure for hot stamping tool design and a software framework in order to interconnect three domains: (I) a parametrised CAD tool model, (II) a linear thermal solver using a fast boundary element method and (III) an optimisation algorithm. This enables the automated set-up, simulation and optimisation of a duct topology. The boundary conditions for the simulations are derived from a reduced model of the thermal loading of the tool. The virtual method proposed is demonstrated on simplified tool segment geometries. The results are transferred to complex tool designs used in industry. For a selected use case, the number of ducts could be reduced by 50% through the application of the proposed method. These results are validated virtually based on an existing design. Hence, the new virtual method contributes to a CAE-driven tool design and a more efficient tool manufacturing.

  18. Attention and Olfactory Consciousness

    OpenAIRE

    Keller, Andreas

    2011-01-01

    Understanding the relation between attention and consciousness is an important part of our understanding of consciousness. Attention, unlike consciousness, can be systematically manipulated in psychophysical experiments and a law-like relation between attention and consciousness is waiting to be discovered. Most attempts to discover the nature of this relation are focused on a special type of attention: spatial visual attention. In this review I want to introduce another type of attention to ...

  19. Quantifying uncertainty in genotype calls.

    Science.gov (United States)

    Carvalho, Benilton S; Louis, Thomas A; Irizarry, Rafael A

    2010-01-15

    Genome-wide association studies (GWAS) are used to discover genes underlying complex, heritable disorders for which less powerful study designs have failed in the past. The number of GWAS has skyrocketed recently with findings reported in top journals and the mainstream media. Microarrays are the genotype calling technology of choice in GWAS as they permit exploration of more than a million single nucleotide polymorphisms (SNPs) simultaneously. The starting point for the statistical analyses used by GWAS to determine association between loci and disease is making genotype calls (AA, AB or BB). However, the raw data, microarray probe intensities, are heavily processed before arriving at these calls. Various sophisticated statistical procedures have been proposed for transforming raw data into genotype calls. We find that variability in microarray output quality across different SNPs, different arrays and different sample batches have substantial influence on the accuracy of genotype calls made by existing algorithms. Failure to account for these sources of variability can adversely affect the quality of findings reported by the GWAS. We developed a method based on an enhanced version of the multi-level model used by CRLMM version 1. Two key differences are that we now account for variability across batches and improve the call-specific assessment of each call. The new model permits the development of quality metrics for SNPs, samples and batches of samples. Using three independent datasets, we demonstrate that the CRLMM version 2 outperforms CRLMM version 1 and the algorithm provided by Affymetrix, Birdseed. The main advantage of the new approach is that it enables the identification of low-quality SNPs, samples and batches. Software implementing of the method described in this article is available as free and open source code in the crlmm R/BioConductor package. Supplementary data are available at Bioinformatics online.

  20. [Work-family conflict in call center].

    Science.gov (United States)

    Ghislieri, Chiara; Ricotta, Simona; Colombo, Lara

    2012-01-01

    The working environment of call centers, which have seen a significant growth in recent years, has been the subject of several studies aiming at understanding its specific dynamics, with particular attention to the possible causes of stress and discomfort. Despite the fact that the work-family conflict is considered a source of stress responsible for undermining workers' well-being, and as such has been explored in many work environments, there is still very little research specific to call centers. This study had the following aims: to explore work-family conflict perceived by call-center operators taking account of any differences related to respondents'professional and personal characteristics; to understand which demands and resources can have an impact on work-family conflict in this context. The study was carried out on a sample of 898 call center operators in a telecommunications company through the administration of a self-reporting questionnaire. Data analysis included: t-test, one-way analysis of variance, linear correlations and multiple regressions. A higher perception of work-family conflict among workers having a full-time contract was observed compared to those having part-time contracts. Multiple regression analysis identified as sources of influence on work-family conflict: emotional dissonance, uneasiness due customer dissatisfaction, workload, avoidance coping and working hours. Work-family conflict in the context studied is not particularly critical: it is in part influenced by professional and personal characteristics of respondents and primarily caused by work demands. Managerial implications are discussed, especially referred to training activities.

  1. An event-related potential study of supramodal attentional control and crossmodal attention effects.

    Science.gov (United States)

    Green, Jessica J; McDonald, John J

    2006-03-01

    We conducted two audiovisual experiments to determine whether event-related potential (ERP) components elicited by attention-directing cues reflect supramodal attentional control. Symbolic visual cues were used to direct attention prior to auditory targets in Experiment 1, and symbolic auditory cues were used to direct attention prior to visual targets in Experiment 2. Different patterns of cue ERPs were found in the two experiments. A frontal negativity called the ADAN was absent in Experiment 2, which indicates that this component does not reflect supramodal attentional control. A posterior positivity called the LDAP was observed in both experiments but was focused more posteriorly over the occipital scalp in Experiment 2. This component appears to reflect multiple processes, including visual processes involved in location marking and target preparation as well as supramodal processes involved in attentional control.

  2. Sustained attention in adult ADHD : time-on-task effects of various measures of attention

    NARCIS (Netherlands)

    Tucha, Lara; Fuermaier, Anselm B.M.; Koerts, Janneke; Buggenthin, Rieka; Aschenbrenner, Steffen; Weisbrod, Matthias; Thome, Johannes; Lange, Klaus W.; Tucha, Oliver

    Neuropsychological research on adults with ADHD showed deficits in various aspects of attention. However, the majority of studies failed to explore the change of performance over time, so-called time-on-task effects. As a consequence, little is known about sustained attention performance of adults

  3. Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

    Science.gov (United States)

    Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

    2002-01-01

    The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

  4. Do ERP components triggered during attentional orienting represent supramodal attentional control?

    Science.gov (United States)

    Seiss, Ellen; Gherri, Elena; Eardley, Alison F; Eimer, Martin

    2007-11-01

    Lateralized ERP components triggered during cued shifts of spatial attention (anterior directing attention negativity [ADAN], late directing attention positivity [LDAP]) have been observed during visual, auditory, and tactile attention tasks, suggesting that these components reflect supramodal attentional control processes. This interpretation has recently been called into question by the finding that the ADAN is absent in response to auditory attention cues. Here we demonstrate that ADAN and LDAP components are reliably elicited in a purely unimodal auditory attention task where auditory cues are followed by auditory imperative stimuli. The fact that the ADAN is not restricted to task contexts where visual or tactile stimuli are relevant is consistent with the hypothesis that this component is linked to supramodal attentional control.

  5. Integrating heterogeneous healthcare call centers.

    Science.gov (United States)

    Peschel, K M; Reed, W C; Salter, K

    1998-01-01

    In a relatively short period, OHS has absorbed multiple call centers supporting different LOBs from various acquisitions, functioning with diverse standards, processes, and technologies. However, customer and employee satisfaction is predicated on OHS's ability to thoroughly integrate these heterogeneous call centers. The integration was initiated and has successfully progressed through a balanced program of focused leadership and a defined strategy which includes site consolidation, sound performance management philosophies, and enabling technology. Benefits have already been achieved with even more substantive ones to occur as the integration continues to evolve.

  6. Perpetual Cancellable American Call Option

    OpenAIRE

    Emmerling, Thomas J.

    2010-01-01

    This paper examines the valuation of a generalized American-style option known as a Game-style call option in an infinite time horizon setting. The specifications of this contract allow the writer to terminate the call option at any point in time for a fixed penalty amount paid directly to the holder. Valuation of a perpetual Game-style put option was addressed by Kyprianou (2004) in a Black-Scholes setting on a non-dividend paying asset. Here, we undertake a similar analysis for the perpetua...

  7. The Wireless Nursing Call System

    DEFF Research Database (Denmark)

    Jensen, Casper Bruun

    2006-01-01

    This paper discusses a research project in which social scientists were involved both as analysts and supporters during a pilot with a new wireless nursing call system. The case thus exemplifies an attempt to participate in developing dependable health care systems and offers insight into the cha......This paper discusses a research project in which social scientists were involved both as analysts and supporters during a pilot with a new wireless nursing call system. The case thus exemplifies an attempt to participate in developing dependable health care systems and offers insight...

  8. Criteria for Evaluating a Game-Based CALL Platform

    Science.gov (United States)

    Ní Chiaráin, Neasa; Ní Chasaide, Ailbhe

    2017-01-01

    Game-based Computer-Assisted Language Learning (CALL) is an area that currently warrants attention, as task-based, interactive, multimodal games increasingly show promise for language learning. This area is inherently multidisciplinary--theories from second language acquisition, games, and psychology must be explored and relevant concepts from…

  9. Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

    International Nuclear Information System (INIS)

    Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

    2014-01-01

    With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

  10. An Evaluation Framework for CALL

    Science.gov (United States)

    McMurry, Benjamin L.; Williams, David Dwayne; Rich, Peter J.; Hartshorn, K. James

    2016-01-01

    Searching prestigious Computer-assisted Language Learning (CALL) journals for references to key publications and authors in the field of evaluation yields a short list. The "American Journal of Evaluation"--the flagship journal of the American Evaluation Association--is only cited once in both the "CALICO Journal and Language…

  11. CARIAA Call - Frequently Asked Questions

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    2013-03-28

    Mar 28, 2013 ... The call is open to research teams from academic institutions, private sector organizations with a research mandate, NGOs, civil society organizations, and research-based organizations. UN organizations may not apply as consortium members. CGIAR centres may apply as third parties, contracted by a ...

  12. Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

    DEFF Research Database (Denmark)

    Taylor, Hayden; Smistrup, Kristian; Boning, Duane

    2011-01-01

    We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

  13. 75 FR 52981 - Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-08-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Wackenhut Security, CR Associates, and Syncreon, Twinsburg, OH; Amended Certification Regarding...

  14. 75 FR 11913 - Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Sterling Heights, MI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment...

  15. The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

  16. Forming of an axially tailored automotive channel section through hot stamping of tailor-welded blanks

    Science.gov (United States)

    Peister, C.; George, R.; Omer, K.; Worswick, M. J.; Malcolm, S.; Dykeman, J.; Yau, C.; Soldaat, R.; Bernert, W.

    2017-09-01

    In this work, top-hat cross-section axial crush rail specimens with tailored properties along their length were investigated. These top-hat channels were hot stamped in a fully cooled die set from tailor-welded blanks (TWBs). The blanks were laser-welded and comprised Usibor® 1500-AS joined to Ductibor® 500-AS in 1.2 mm and 1.6 mm thicknesses. Micro-hardness measurements were taken along the length of the formed specimens to map the hardness profile along their length. The effect of gauge thickness on hardness was evaluated. The hardness profile of these TWB parts was compared to that of parts formed using tailored in-die heating (IDH).

  17. Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

    Energy Technology Data Exchange (ETDEWEB)

    Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

    2013-08-26

    In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

  18. Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients

    DEFF Research Database (Denmark)

    Koefoed-Nielsen, Pernille; Weinreich, I; Bengtsson, M

    2017-01-01

    BACKGROUND: Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program...... (STAMP), a de-centralized approach has been implemented in 2009. AIMS: The program has been improved during the years from utilizing HLA-A, -B, -DR matching only to include typing of all deceased donors for HLA-A, -B, -C, -DRB1 and -DQB1. The calculation of a transplantability score (TS) has been...... introduced in order to take both HLA and AB0 into consideration resulting in a more realistic picture of the transplantability chance. MATERIALS AND METHODS: Patients were selected for eligibility and results of immunisation status were prepared in each of the 9 tissue typing laboratories, while access...

  19. Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2014-01-01

    Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

  20. SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

    Directory of Open Access Journals (Sweden)

    Alexandre Reis

    2008-01-01

    Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

  1. Finite element analysis and optimization of process parameters during stamp forming of composite materials

    International Nuclear Information System (INIS)

    Venkatesan, S; Kalyanasundaram, S

    2010-01-01

    In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

  2. Determination of stamp deformation during imprinting on semi-spherical surfaces

    DEFF Research Database (Denmark)

    Kafka, Jan; Matschuk, Maria; Pranov, Henrik

    of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

  3. Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

    Science.gov (United States)

    Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

    2017-09-01

    During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

  4. Framework for simulation-driven design of stamping dies considering elastic die and press deformations

    Science.gov (United States)

    Pilthammar, Johan; Wall, Johan; Sigvant, Mats

    2017-10-01

    Sheet metal forming (SMF) simulations are used extensively throughout the development phase of industrial stamping dies. In these SMF simulations, the die and press are normally considered as rigid. Previous research has however shown that elastic deformation in these parts has a significant negative impact on process performance. This paper demonstrates methods for counteracting these negative effects, with a high potential for improved production support and a reduced lead time through a shorter try-out process. A structural finite element model (FE-model) of a simplified die is studied. To account for elastic deformation, the blankholder surfaces are first virtually reworked by adjusting the nodal positions on the die surfaces attaining a pressure distribution in accordance to the design phase SMF simulations with rigid surfaces. The elastic FE-model with reworked surfaces then represents a stamping die in running production. The die is now assumed to be exposed to changed process conditions giving an undesired blankholder pressure distribution. The changed process conditions could for example be due to a change of press line. An optimization routine is applied to compensate the negative effects of the new process conditions. The optimization routine uses the contact forces acting on the shims of the spacer blocks and cushion pins as optimization variables. A flexible simulation environment using MATLAB and ABAQUS is used. ABAQUS is executed from MATLAB and the results are automatically read back into MATLAB. The suggested optimization procedure reaches a pressure distribution very similar to the initial distribution assumed to be the optimum, and thereby verifying the method. Further research is needed for a method to transform the calculated forces in the optimization routine back to shims thicknesses. Furthermore, the optimization time is relatively long and needs to be reduced in the future for the method to reach its full potential.

  5. Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

    Science.gov (United States)

    Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

    2016-12-01

    Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

  6. Calle y Saberes en Movimiento

    Directory of Open Access Journals (Sweden)

    Laura Daniela Aguirre Aguilar

    2010-01-01

    Full Text Available En México el rezago, el ausentismo, la deserción escolar, el trabajo a temprana edad y el inicio de una vida en la calle, en repetidas ocasiones son consecuencia de un núcleo familiar desarticulado o de una débil relación intrafamiliar, así como de una condición socioeconómica en desventaja. Ante esta problemática, la Secretaría de Educación Pública, instancia gubernamental encargada de garantizar una educación de calidad para la población, trabaja coordinadamente con organizaciones de la sociedad civil e instancias públicas, para la reintegración a los espacios educativos de los niños, niñas y jóvenes en situación de calle.

  7. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    International Nuclear Information System (INIS)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-01-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

  8. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

  9. Armed calling for sur plus

    Directory of Open Access Journals (Sweden)

    Andréa Limberto Leite

    2013-12-01

    Full Text Available The most recent work by researcher José Luiz Aidar Prado, Convocações biopolíticas dos dispositivos comunicacionais (freely translated as Biopolitic convoking of communicational dispositives puts the reader straight in the face of the calling to enter circulating discourses. They are directed to all subjects and also accomodate the discourses with urgence for consumption. 

  10. Ultrasound call detection in capybara

    Directory of Open Access Journals (Sweden)

    Selene S.C. Nogueira

    2012-07-01

    Full Text Available The vocal repertoire of some animal species has been considered a non-invasive tool to predict distress reactivity. In rats ultrasound emissions were reported as distress indicator. Capybaras[ vocal repertoire was reported recently and seems to have ultrasound calls, but this has not yet been confirmed. Thus, in order to check if a poor state of welfare was linked to ultrasound calls in the capybara vocal repertoire, the aim of this study was to track the presence of ultrasound emissions in 11 animals under three conditions: 1 unrestrained; 2 intermediately restrained, and 3 highly restrained. The ultrasound track identified frequencies in the range of 31.8±3.5 kHz in adults and 33.2±8.5 kHz in juveniles. These ultrasound frequencies occurred only when animals were highly restrained, physically restrained or injured during handling. We concluded that these calls with ultrasound components are related to pain and restraint because they did not occur when animals were free of restraint. Thus we suggest that this vocalization may be used as an additional tool to assess capybaras[ welfare.

  11. Mechanism of Perceptual Attention

    National Research Council Canada - National Science Library

    Lu, Zhong-Lin

    2000-01-01

    .... Attention may affect the perceived clarity of visual displays and improve performance. In this project, a powerful external noise method was developed to identify and characterize the effect of attention on perceptual performance in visual tasks...

  12. Visual attention capacity

    DEFF Research Database (Denmark)

    Habekost, Thomas; Starrfelt, Randi

    2009-01-01

    Psychophysical studies have identified two distinct limitations of visual attention capacity: processing speed and apprehension span. Using a simple test, these cognitive factors can be analyzed by Bundesen's Theory of Visual Attention (TVA). The method has strong specificity and sensitivity...

  13. Mechanisms of Perceptual Attention

    National Research Council Canada - National Science Library

    Dosher, Barbara

    2000-01-01

    .... Attention may affect the perceived clarity of visual displays and improve performance. In this project, a powerful external noise method was developed to identify and characterize the effect of attention on perceptual performance in visual tasks...

  14. Case Study to Illustrate the Potential of Conformal Cooling Channels for Hot Stamping Dies Manufactured Using Hybrid Process of Laser Metal Deposition (LMD and Milling

    Directory of Open Access Journals (Sweden)

    Magdalena Cortina

    2018-02-01

    Full Text Available Hot stamping dies include cooling channels to treat the formed sheet. The optimum cooling channels of dies and molds should adapt to the shape and surface of the dies, so that a homogeneous temperature distribution and cooling are guaranteed. Nevertheless, cooling ducts are conventionally manufactured by deep drilling, attaining straight channels unable to follow the geometry of the tool. Laser Metal Deposition (LMD is an additive manufacturing technique capable of fabricating nearly free-form integrated cooling channels and therefore shape the so-called conformal cooling. The present work investigates the design and manufacturing of conformal cooling ducts, which are additively built up on hot work steel and then milled in order to attain the final part. Their mechanical performance and heat transfer capability has been evaluated, both experimentally and by means of thermal simulation. Finally, conformal cooling conduits are evaluated and compared to traditional straight channels. The results show that LMD is a proper technology for the generation of cooling ducts, opening the possibility to produce new geometries on dies and molds and, therefore, new products.

  15. Principles of visual attention

    DEFF Research Database (Denmark)

    Bundesen, Claus; Habekost, Thomas

    The nature of attention is one of the oldest and most central problems in psychology. A huge amount of research has been produced on this subject in the last half century, especially on attention in the visual modality, but a general explanation has remained elusive. Many still view attention res....... The book explains the TVA model and shows how it accounts for attentional effects observed across all the research areas described. Principles of Visual Attention offers a uniquely integrated view on a central topic in cognitive neuroscience....

  16. Attention competition with advertisement

    Science.gov (United States)

    Cetin, Uzay; Bingol, Haluk O.

    2014-09-01

    In the new digital age, information is available in large quantities. Since information consumes primarily the attention of its recipients, the scarcity of attention is becoming the main limiting factor. In this study, we investigate the impact of advertisement pressure on a cultural market where consumers have a limited attention capacity. A model of competition for attention is developed and investigated analytically and by simulation. Advertisement is found to be much more effective when the attention capacity of agents is extremely scarce. We have observed that the market share of the advertised item improves if dummy items are introduced to the market while the strength of the advertisement is kept constant.

  17. Studies of OC-STAMP in Osteoclast Fusion: A New Knockout Mouse Model, Rescue of Cell Fusion, and Transmembrane Topology.

    Directory of Open Access Journals (Sweden)

    Hanna Witwicka

    Full Text Available The fusion of monocyte/macrophage lineage cells into fully active, multinucleated, bone resorbing osteoclasts is a complex cell biological phenomenon that utilizes specialized proteins. OC-STAMP, a multi-pass transmembrane protein, has been shown to be required for pre-osteoclast fusion and for optimal bone resorption activity. A previously reported knockout mouse model had only mononuclear osteoclasts with markedly reduced resorption activity in vitro, but with paradoxically normal skeletal micro-CT parameters. To further explore this and related questions, we used mouse ES cells carrying a gene trap allele to generate a second OC-STAMP null mouse strain. Bone histology showed overall normal bone form with large numbers of TRAP-positive, mononuclear osteoclasts. Micro-CT parameters were not significantly different between knockout and wild type mice at 2 or 6 weeks old. At 6 weeks, metaphyseal TRAP-positive areas were lower and mean size of the areas were smaller in knockout femora, but bone turnover markers in serum were normal. Bone marrow mononuclear cells became TRAP-positive when cultured with CSF-1 and RANKL, but they did not fuse. Expression levels of other osteoclast markers, such as cathepsin K, carbonic anhydrase II, and NFATc1, were not significantly different compared to wild type. Actin rings were present, but small, and pit assays showed a 3.5-fold decrease in area resorbed. Restoring OC-STAMP in knockout cells by lentiviral transduction rescued fusion and resorption. N- and C-termini of OC-STAMP were intracellular, and a predicted glycosylation site was shown to be utilized and to lie on an extracellular loop. The site is conserved in all terrestrial vertebrates and appears to be required for protein stability, but not for fusion. Based on this and other results, we present a topological model of OC-STAMP as a 6-transmembrane domain protein. We also contrast the osteoclast-specific roles of OC- and DC-STAMP with more generalized

  18. Sustained Attention Ability Affects Simple Picture Naming

    Directory of Open Access Journals (Sweden)

    Suzanne R. Jongman

    2017-07-01

    Full Text Available Sustained attention has previously been shown as a requirement for language production. However, this is mostly evident for difficult conditions, such as a dual-task situation. The current study provides corroborating evidence that this relationship holds even for simple picture naming. Sustained attention ability, indexed both by participants’ reaction times and individuals’ hit rate (the proportion of correctly detected targets on a digit discrimination task, correlated with picture naming latencies. Individuals with poor sustained attention were consistently slower and their RT distributions were more positively skewed when naming pictures compared to individuals with better sustained attention. Additionally, the need to sustain attention was manipulated by changing the speed of stimulus presentation. Research has suggested that fast event rates tax sustained attention resources to a larger degree than slow event rates. However, in this study the fast event rate did not result in increased difficulty, neither for the picture naming task nor for the sustained attention task. Instead, the results point to a speed-accuracy trade-off in the sustained attention task (lower accuracy but faster responses in the fast than in the slow event rate, and to a benefit for faster rates in the picture naming task (shorter naming latencies with no difference in accuracy. Performance on both tasks was largely comparable, supporting previous findings that sustained attention is called upon during language production.

  19. Principles of visual attention

    DEFF Research Database (Denmark)

    Bundesen, Claus; Habekost, Thomas

    The nature of attention is one of the oldest and most central problems in psychology. A huge amount of research has been produced on this subject in the last half century, especially on attention in the visual modality, but a general explanation has remained elusive. Many still view attention...... research as a field that is fundamentally fragmented. This book takes a different perspective and presents a unified theory of visual attention: the TVA model. The TVA model explains the many aspects of visual attention by just two mechanisms for selection of information: filtering and pigeonholing....... These mechanisms are described in a set of simple equations, which allow TVA to mathematically model a large number of classical results in the attention literature. The theory explains psychological and neuroscientific findings by the same equations; TVA is a complete theory of visual attention, linking mind...

  20. Microstructure and Tensile-Shear Properties of Resistance Spot Welded 22MnMoB Hot-Stamping Annealed Steel

    Science.gov (United States)

    Li, Yang; Cui, Xuetuan; Luo, Zhen; Ao, Sansan

    2017-01-01

    The present paper deals with the joining of 22MnMoB hot-stamping annealed steel carried out by the spot welding process. Microstructural characterization, microhardness testing and tensile-shear testing were conducted. The effects of the welding parameters, including the electrode tip diameter, welding current, welding time and electrode force upon the tensile-shear properties of the welded joints, were investigated. The results showed that a weld size of 9.6 mm was required to ensure pullout failure for the 1.8 -mm-thick hot-stamping annealed steel sheet. The welding current had the largest influence upon the tensile-shear properties of the 22MnMoB steel welded joint. The bulk resistance should play an important role in the nugget formation. In pullout failure mode, failure was initiated at the heat-affected zone, where softening occurs owing to the tempering of martensite.

  1. Characterization of patterns of Localized Doping Using Stamping technique for Selective n-Emitter Solar Cell Structure

    Science.gov (United States)

    Mangkornkaew, A.; Fangsuwannarak, T.

    2017-10-01

    In the present, a novel cost-effective process scheme for single step selective emitter diffusion was implemented. It is based on the fabrication of acid-resist pattern using a stamping technique with collaboration of a spin on dopant (SOD) and chemical etched-back emitter methods. The SOD diffusion process provided heavily doping n-emitter. Acid-resist pattern without exploitation of a complex method as a photolithography, was stamped as a metal contact pattern for prevention of a localized heavy-dope region from etching back. Phosphorus doping profiles were controlled by etching back time to provide the formation of n-type selective emitter. Sheet resistance is tunable from 10 to 180 Ohm/Sq on localized n-layer. After removal of the patterned acid-resist, the selective n-emitter solar cell structure was obtained under one-step diffusion to achieve a better blue-light response and low contact resistance.

  2. Attention Mosaics: Studies of Organizational Attention

    NARCIS (Netherlands)

    L. Carvalho de Mesquita Ferreira (Luciana)

    2010-01-01

    textabstractOrganizational studies emphasizing the role of attention in organizational behavior depart from the idea that organizations, like individuals, have limited capacity to attend to environmental stimuli. The bounded capacity of the organizations to respond to stimuli is conditioned by the

  3. Pre-attentive and attentive vision module

    NARCIS (Netherlands)

    Nyamsuren, Enkhbold; Taatgen, Niels A.

    This paper introduces a new vision module, called PAAV, developed for the cognitive architecture ACT-R. Unlike ACT-R's default vision module that was originally developed for top-down perception only, PAAV was designed to model a wide range of tasks, such as visual search and scene viewing, where

  4. Developing roll-to-roll manufacturing system for flexible and stretchable electronics by direct stamping of silver nano-ink

    OpenAIRE

    Kim, Jiseok

    2014-01-01

    Direct stamping of silver nanoparticle based ink has been developed for cost-effective and process-effective manufacturing of flexible or stretchable electronic devices. Facile removal of residual layer from deposited silver nanoparticles (AgNPs) layer results in high fidelity of final silver electrode without further post-processes. Scanning electron microscopy (SEM) images and energy dispersive x-ray spectroscopic analysis have revealed residue-free transfer of microscale inter-digitated ca...

  5. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    OpenAIRE

    Dong Y.; Formosa D.; Fernandez J.; Li X.; Fuentes G.; Zoltan K.; Dong H.

    2015-01-01

    In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tr...

  6. Development of a new biaxial testing system for generating forming limit diagrams for sheet metals under hot stamping conditions

    OpenAIRE

    Shao, Z; Li, N; Lin, J; Dean, TA

    2016-01-01

    Conventional experimental approaches used to generate forming limit diagrams (FLDs) for sheet metals at different linear strain paths are not applicable to hot stamping and cold die quenching processes because cooling occurs prior to deformation and consistent values of heating rate, cooling rate, deformation temperature and strain rate are not easy to obtain. A novel biaxial testing system for use in a Gleeble testing machine has been adopted to generate forming limits of sheet metals, inclu...

  7. Image Subtraction Reduction of Open Clusters M35 & NGC 2158 in the K2 Campaign 0 Super Stamps

    Science.gov (United States)

    Soares-Furtado, M.; Hartman, J. D.; Bakos, G. Á.; Huang, C. X.; Penev, K.; Bhatti, W.

    2017-04-01

    We observed the open clusters M35 and NGC 2158 during the initial K2 campaign (C0). Reducing these data to high-precision photometric timeseries is challenging due to the wide point-spread function (PSF) and the blending of stellar light in such dense regions. We developed an image-subtraction-based K2 reduction pipeline that is applicable to both crowded and sparse stellar fields. We applied our pipeline to the data-rich C0 K2 super stamp, containing the two open clusters, as well as to the neighboring postage stamps. In this paper, we present our image subtraction reduction pipeline and demonstrate that this technique achieves ultra-high photometric precision for sources in the C0 super stamp. We extract the raw light curves of 3960 stars taken from the UCAC4 and EPIC catalogs and de-trend them for systematic effects. We compare our photometric results with the prior reductions published in the literature. For de-trended TFA-corrected sources in the 12-12.25 {{{K}}}{{p}} magnitude range, we achieve a best 6.5-hour window running rms of 35 ppm, falling to 100 ppm for fainter stars in the 14-14.25 {{{K}}}{{p}} magnitude range. For stars with {K}p> 14, our de-trended and 6.5-hour binned light curves achieve the highest photometric precision. Moreover, all our TFA-corrected sources have higher precision on all timescales investigated. This work represents the first published image subtraction analysis of a K2 super stamp. This method will be particularly useful for analyzing the Galactic bulge observations carried out during K2 campaign 9. The raw light curves and the final results of our de-trending processes are publicly available at http://k2.hatsurveys.org/archive/.

  8. The Choices programme: a simple, front-of-pack stamp making healthy choices easy.

    Science.gov (United States)

    Dötsch-Klerk, Mariska; Jansen, Léon

    2008-01-01

    Some food products fit better within a healthy diet than others, but how can consumers tell? The Choices programme is a simple and internationally-applicable programme to help consumers make a healthy choice on food and beverages and to stimulate industry towards healthy product innovation in all food groups. The essence of the programme is a front-of-pack stamp on products that pass an evaluation against scientific criteria. To that end generic criteria have been established for levels of saturated fat, trans fat, sugars and sodium, which are based on international dietary guidelines (FAO/WHO). For some food categories there are specific criteria for these nutrients as well as for dietary fibre and calories. In this way the criteria are challenging without being impossible to meet. The programme has been initiated by food industry and is open to all companies in food industry, retail and catering. The approach is also supported by nutritional scientists, governments and NGOs. An independent scientific committee is responsible for designing and periodically reviewing the qualifying criteria. The current qualifying criteria were developed by scientific committees in the Netherlands and Belgium. These criteria will now be reviewed by an International Scientific Committee, consisting of internationally-recognised food and nutrition experts. To accommodate the developments in nutrition science and food technology, this review will take place every two years.

  9. Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions

    Science.gov (United States)

    Sirvin, Q.; Velay, V.; Bonnaire, R.; Penazzi, L.

    2017-10-01

    The Ti-6Al-4V titanium alloy is widely used for the manufacture of aeronautical and automotive parts (solid parts). In aeronautics, this alloy is employed for its excellent mechanical behavior associated with low density, outstanding corrosion resistance and good mechanical properties up to 600°C. It is especially used for the manufacture of fuselage frames, on the pylon for carrying out the primary structure (machining forged blocks) and the secondary structure in sheet form. In this last case, the sheet metal forming can be done through various methods: at room temperature by drawing operation, at very high temperature (≃900°C) by superplastic forming (SPF) and at intermediate temperature (≥750°C) by hot forming (HF). In order to reduce production costs and environmental troubles, the cycle times reduction associated with a decrease of temperature levels are relevant. This study focuses on the behavior modelling of Ti-6Al-4V alloy at temperatures above room temperature to obtained greater formability and below SPF condition to reduce tools workshop and energy costs. The displacement field measurement obtained by Digital Image Correlation (DIC) is based on innovative surface preparation pattern adapted to high temperature exposures. Different material parameters are identified to define a model able to predict the mechanical behavior of Ti-6Al-4V alloy under hot stamping conditions. The hardening plastic model identified is introduced in FEM to simulate an omega shape forming operation.

  10. Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

    Science.gov (United States)

    Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

    2017-11-08

    A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

  11. A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

    Directory of Open Access Journals (Sweden)

    Chih-Ting Lin

    2012-08-01

    Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

  12. Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2016-01-01

    Full Text Available An advanced forming technology, solution Heat treatment, Forming and in-die Quenching (HFQ®, has been employed to form AA6082 tailor welded blanks (TWBs. In comparison with conventional stamping of TWBs, the mechanical properties and formability of AA6082 laser TWBs could be improved under the HFQ® forming condition. The TWB was divided into three physical zones, i.e. base metal, heat affected zone (HAZ and weld zone, based on the hardness distribution. It was found that the degraded hardness of the weldment can be restored after HFQ® forming. TWBs of AA6082 with different thickness ratios of 2 (2–1 mm, 1.3 (2–1.5 mm and 1 (1.5–1.5 mm were used to study the TWB thickness ratio effects on the forming behaviour. Hemispherical punch dome tests on the TWBs with varying thickness ratios demonstrated different formabilities, and indicated increased displacement of the weld line with increasing thickness ratio. Finite element (FE modelling was adopted to analyse the weld line movement and strain distributions during HFQ® forming.

  13. Forming and quenching behaviours in hot stamping of thin quenchable sheets

    Directory of Open Access Journals (Sweden)

    Nakagawa Yuki

    2015-01-01

    Full Text Available A thin aluminium-coated quenchable steel sheet was hot-stamped to investigate the effect of the thickness. The sheets having 0.6, 1.0 and 1.6 mm in thickness were heated at 900 ∘C by a furnace and formed after 7 s from the furnace. The cooling rates of 0.6 mm and 1.0 mm in thickness from 900 ∘C to 400 ∘C under air cooling were 20.9 ∘C/s and 13.6 ∘C/s, respectively. The hardness of the air-cooled sheets having 1.0 mm in thickness was 300 HV1, whereas that of the sheet having 0.6 mm in thickness was 380 HV1 because of the high cooling rate. The Vickers hardness of the U-bent sheets of 0.6 and 1.0 mm after 7 s from the furnace without the holding time at the bottom dead centre were 500 and 430 HV1, respectively.

  14. Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet

    Science.gov (United States)

    Suh, Chang Hee; Jang, Won Seok; Oh, Sang Kyun; Lee, Rac Gyu; Jung, Yun-Chul; Kim, Young Suk

    2012-08-01

    Boron steel is widely used throughout the automobile industry due to its high tensile strength and hardenability. When boron steel is used for body parts, only high strength is required for crashworthiness. However, when boron steel is used for chassis parts, a high fatigue life is needed. The microstructure of boron steel is mainly affected by the cooling rate during hot stamping. Therefore, this study investigated the low cyclic fatigue life according to the cooling rate. The fatigue life increased at a low strain amplitude when the cooling rate was fast. However, at a high strain amplitude, the fatigue life decreased, due to the low ductility and fracture toughness of the martensite formed by rapid cooling. Martensite formed by a fast cooling rate shows excellent fatigue life at a low total strain amplitude; however, a multiphase microstructure formed by a slow cooling rate is recommended if the parts experience high and low total strain amplitudes alternately. In addition, the cooling rate has little effect on the distribution of solute boron and boron precipitations, so it is expected that boron rarely affects low cyclic fatigue.

  15. Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

    Science.gov (United States)

    Veit, R.; Hofmann, H.; Kolleck, R.; Sikora, S.

    2011-01-01

    Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating. In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

  16. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Science.gov (United States)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny-Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples.

  17. Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction

    Science.gov (United States)

    Deng; Wu; Brittain; Whitesides

    2000-07-15

    This paper describes a practical method for the fabrication of photomasks, masters, and stamps/molds used in soft lithography that minimizes the need for specialized equipment. In this method, CAD files are first printed onto paper using an office printer with resolution of 600 dots/in. Photographic reduction of these printed patterns transfers the images onto 35-mm film or microfiche. These photographic films can be used, after development, as photomasks in 1:1 contact photolithography. With the resulting photoresist masters, it is straightforward to fabricate poly(dimethylsiloxane) (PDMS) stamps/molds for soft lithography. This process can generate microstructures as small as 15 microm; the overall time to go from CAD file to PDMS stamp is 4-24 h. Although access to equipment-spin coater and ultraviolet exposure tool-normally found in the clean room is still required, the cost of the photomask itself is small, and the time required to go from concept to device is short. A comparison between this method and all other methods that generate film-type photomasks has been performed using test patterns of lines, squares, and circles. Three microstructures have also been fabricated to demonstrate the utility of this method in practical applications.

  18. BUFO PARDALIS (ANURA: BUFONIDAE): MATING CALL AND ...

    African Journals Online (AJOL)

    the calls of one of these species, Bufo pardalis. Hewitt, were not analysed by Tandy & Keith. (1972). Furthennore there is some confusion in the literature regarding the mating call of this species. For these reasons this mating call is here clarified. The mating call of B. pardaiis was first described by Ranger (in Hewitt 1935) as ...

  19. Touchscreen Sustained Attention Task (SAT) for Rats.

    Science.gov (United States)

    Bangasser, Debra A; Wicks, Brittany; Waxler, David E; Eck, Samantha R

    2017-09-15

    Sustained attention is the ability to monitor intermittent and unpredictable events over a prolonged period of time. This attentional process subserves other aspects of cognition and is disrupted in certain neurodevelopmental, neuropsychiatric, and neurodegenerative disorders. Thus, it is clinically important to identify mechanisms that impair and improve sustained attention. Such mechanisms are often first discovered using rodent models. Therefore, several behavior procedures for testing aspects of sustained attention have been developed for rodents. One, first described by McGaughy and Sarter (1995), called the sustained attention task (SAT), trains rats to distinguish between signal (i.e., brief light presentation) and non-signal trials. The signals are short and thus require careful attention to be perceived. Attentional demands can be increased further by introducing a distractor (e.g., flashing houselight). We have modified this task for touchscreen operant chambers, which are configured with a touchscreen on one wall that can present stimuli and record responses. Here we detail our protocol for SAT in touchscreen chambers. Additionally, we present standard measures of performance in male and female Sprague-Dawley rats. Comparable performance on this task in both sexes highlights its use for attention studies, especially as more researchers are including female rodents in their experimental design. Moreover, the easy implementation of SAT for the increasingly popular touchscreen chambers increases its utility.

  20. Social calls of flying big brown bats (Eptesicus fuscus

    Directory of Open Access Journals (Sweden)

    Genevieve Spanjer Wright

    2013-08-01

    Full Text Available Vocalizations serving a variety of social functions have been reported in many bat species (Order Chiroptera. While echolocation by big brown bats (Eptesicus fuscus has been the subject of extensive study, calls used by this species for communication have received comparatively little research attention. Here, we report on a rich repertoire of vocalizations produced by big brown bats in a large flight room equipped with synchronized high speed stereo video and audio recording equipment. Bats were studied individually and in pairs, while sex, age, and experience with a novel foraging task were varied. We used Discriminant Function Analysis to classify six different vocalizations that were recorded when two bats were present. Contingency table analyses revealed a higher prevalence of social calls when males were present, and some call types varied in frequency of emission based on trial type or bat age. Bats flew closer together around the time some social calls were emitted, indicating that communicative calls may be selectively produced when conspecifics fly near one another. These findings are the first reports of social calls from flying big brown bats and provide insight into the function of communicative vocalizations emitted by this species.

  1. The neuroanatomy of attention.

    Science.gov (United States)

    Filley, Christopher M

    2002-05-01

    Attention is a complex neurobehavioral domain that is essential for all higher functions. Large areas of the brain are devoted to attention, reflecting its importance in the entire range of mental operations. Currently, two major distributed neural networks are recognized as mediating complementary aspects of attentional function. One is a diffuse system that distributes attention globally. This attentional system is subserved by a widespread network of thalamic and bihemispheric structures in which the frontal lobes are particularly important. The second network, a focal system that distributes attention to salient aspects of spatial experience, is lateralized to frontal and parietal regions of the right hemisphere. Both attentional networks are comprised of cortical and subcortical gray matter structures, as well as connecting white matter tracts that integrate these regions into functional ensembles. Neurological disorders frequently produce dramatic syndromes reflecting dysfunction of these networks. Among these syndromes are the acute confusional state, which results from disturbance of the diffuse system, and left neglect, which follows disruption of the right hemisphere system. The neuroanatomy of attention is crucial for understanding important neurobehavioral syndromes and their treatment.

  2. Attention and choice

    DEFF Research Database (Denmark)

    Orquin, Jacob Lund; Mueller Loose, Simone

    2013-01-01

    This paper reviews studies on eye movements in decision making, and compares their observations to theoretical predictions concerning the role of attention in decision making. Four decision theories are examined: rational models, bounded rationality, evidence accumulation, and parallel constraint...... satisfaction models. Although most theories were confirmed with regard to certain predictions, none of the theories adequately accounted for the role of attention during decision making. Several observations emerged concerning the drivers and down-stream effects of attention on choice, suggesting...... that attention processes plays an active role in constructing decisions. So far, decision theories have largely ignored the constructive role of attention by assuming that it is entirely determined by heuristics, or that it consists of stochastic information sampling. The empirical observations reveal...

  3. Probing Protein Multidimensional Conformational Fluctuations by Single-Molecule Multiparameter Photon Stamping Spectroscopy

    Science.gov (United States)

    2015-01-01

    Conformational motions of proteins are highly dynamic and intrinsically complex. To capture the temporal and spatial complexity of conformational motions and further to understand their roles in protein functions, an attempt is made to probe multidimensional conformational dynamics of proteins besides the typical one-dimensional FRET coordinate or the projected conformational motions on the one-dimensional FRET coordinate. T4 lysozyme hinge-bending motions between two domains along α-helix have been probed by single-molecule FRET. Nevertheless, the domain motions of T4 lysozyme are rather complex involving multiple coupled nuclear coordinates and most likely contain motions besides hinge-bending. It is highly likely that the multiple dimensional protein conformational motions beyond the typical enzymatic hinged-bending motions have profound impact on overall enzymatic functions. In this report, we have developed a single-molecule multiparameter photon stamping spectroscopy integrating fluorescence anisotropy, FRET, and fluorescence lifetime. This spectroscopic approach enables simultaneous observations of both FRET-related site-to-site conformational dynamics and molecular rotational (or orientational) motions of individual Cy3-Cy5 labeled T4 lysozyme molecules. We have further observed wide-distributed rotational flexibility along orientation coordinates by recording fluorescence anisotropy and simultaneously identified multiple intermediate conformational states along FRET coordinate by monitoring time-dependent donor lifetime, presenting a whole picture of multidimensional conformational dynamics in the process of T4 lysozyme open-close hinge-bending enzymatic turnover motions under enzymatic reaction conditions. By analyzing the autocorrelation functions of both lifetime and anisotropy trajectories, we have also observed the dynamic and static inhomogeneity of T4 lysozyme multidimensional conformational fluctuation dynamics, providing a fundamental

  4. 78 FR 76218 - Rural Call Completion

    Science.gov (United States)

    2013-12-17

    ... Alliance for Telecommunications Industry Solutions (ATIS) released the Intercarrier Call Completion/Call... consumers and industry by adopting a rule prohibiting false ring signaling. In the Further Notice of... billed. The Commission adopted rules requiring telecommunications carriers and providers of...

  5. Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

    Science.gov (United States)

    Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

    2018-03-01

    22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

  6. HOW TO CALL THE CERN FIRE BRIGADE

    CERN Multimedia

    2001-01-01

    The telephone numbers of the CERN Fire Brigade are: 74444 for emergency calls 74848 for other calls Note: the number 112 will stay in use for emergency calls from 'wired' telephones, however, from mobile phones it leads to non-CERN emergency services.

  7. HOW TO CALL THE CERN FIRE BRIGADE

    CERN Multimedia

    2001-01-01

    The telephone numbers of the CERN Fire Brigade are: 74444 for emergency calls 74848 for other calls Note The number 112 will stay in use for emergency calls from 'wired' telephones, however, from mobile phones it leads to non-CERN emergency services.

  8. HOW TO CALL THE CERN FIRE BRIGADE

    CERN Multimedia

    2002-01-01

    The telephone numbers of the CERN Fire Brigade are: 74444 for emergency calls 74848 for other calls Note The number 112 will stay in use for emergency calls from 'wired' telephones, however, from mobile phones it leads to non-CERN emergency services.

  9. How to call the Fire Brigade

    CERN Multimedia

    2003-01-01

    The telephone numbers for the CERN Fire Brigade are: 74444 for emergency calls 74848 for other calls Note The number 112 will stay in use for emergency calls from "wired" telephones, however, from mobile phones it leads to non-CERN emergency services.

  10. HOW TO CALL THE CERN FIRE BRIGADE

    CERN Multimedia

    2002-01-01

    The telephone numbers of the CERN Fire Brigade are: 74444 for emergency calls 74848 for other calls Note The number 112 will stay in use for emergency calls from 'wired' telephones, however, from mobile phones it leads to non-CERN emergency services.  

  11. Indico CONFERENCE: Define the Call for Abstracts

    CERN Multimedia

    CERN. Geneva; Ferreira, Pedro

    2017-01-01

    In this tutorial, you will learn how to define and open a call for abstracts. When defining a call for abstracts, you will be able to define settings related to the type of questions asked during a review of an abstract, select the users who will review the abstracts, decide when to open the call for abstracts, and more.

  12. Calling in Work: Secular or Sacred?

    Science.gov (United States)

    Steger, Michael F.; Pickering, N. K.; Shin, J. Y.; Dik, B. J.

    2010-01-01

    Recent scholarship indicates that people who view their work as a calling are more satisfied with their work and their lives. Historically, calling has been regarded as a religious experience, although modern researchers frequently have adopted a more expansive and secular conceptualization of calling, emphasizing meaning and personal fulfillment…

  13. Do market participants learn from conference calls?

    NARCIS (Netherlands)

    Roelofsen, E.; Verbeeten, F.; Mertens, G.

    2014-01-01

    We examine whether market participants learn from the information that is disseminated during the Q-and-A section of conference calls. Specifically, we investigate whether stock prices react to information on intangible assets provided during conference calls, and whether conference calls

  14. Neural Mechanisms of Attention

    Science.gov (United States)

    1993-05-21

    early in the auditory system. Evoked oto-acoustic emissions (EOAE), a measure of activity of outer hair cells in the cochlea, were recorded during...trial of methylphenidate in black adolescents. Attentional, behavioral, and physiological effects. CLINICAL.PEDIATRICS., 27,74-81. Bruto, V...B., & Schoeler, T. (1988). Attention deficit disorder and methylphenidate : a multilevel analysis of dose-response effects on children’s impulsivity

  15. Attention, Predation, Counterintuition

    DEFF Research Database (Denmark)

    Clasen, Mathias

    2012-01-01

    of Dracula to account for the novel’s impact and resilience. Dracula connected squarely with late-Victorian anxieties, but the novel also appeals to trans-historical adaptive dispositions. I analyze Stoker’s use of narrative strategies to grab and sustain attention, and Count Dracula as a supercharged...... predator, a counterintuitive monster well-designed to engage attention and spark the imagination....

  16. Hunza Landslide and Monsoon Flooding in Pakistan Call for International Attention to Transboundary Natural Hazards

    Science.gov (United States)

    Kargel, J. S.; Fink, W.; Furfaro, R.; Leonard, G. J.; Patterson, M.; Glims, Gaphaz

    2010-12-01

    Two major disasters in Pakistan and innumerable lesser disasters throughout the Himalaya-Karakoram region in 2010 highlight geologic events and extreme weather (perhaps climate change) in affecting the well being of whole nations and commerce and relations between nations. Two chief events in Pakistan include the Jan. 4 rockslide into the Hunza River and the subsequent formation of a natural dam lake (Lake Gojal); and the monsoon precipitation-fed flooding across the Indus Basin. The first event severed Pakistan’s major land link with China. The second event devastated Pakistan’s national land-based transportation infrastructure and agriculture and displaced millions of people. In a country plagued by monsoon-driven floods, the lack of catastrophic breakout of Lake Gojal is welcome. Satellite-based monitoring shows the spillway to be eroding more rapidly (but not alarmingly) under August’s monsoon peak flow. Similar events have occurred before in the region and will occur again. These mega-events in Pakistan should be an alert for all of South Asia, as climate change increases or shifts the hazard environment, encroaching development and urbanization increases the vulnerabilities, and as improved capacity for trans-national commerce breaks down the Himalayan barrier and both promotes new opportunities and possible conflicts. 2010's natural mega-calamities in Pakistan and widespread landsliding and flooding elsewhere in South Asia underscores the subcontinent’s need for a thorough field-, remote sensing-, and modeling-based assessment of the disaster potential related to landslides, glacier surges, extreme monsoon precipitation events, natural glacier and landslide dam lake outbursts, and unseasonal snow melting. The Himalayan-Karakoram region is remarkable for its heterogeneous responses to climate change. For instance, some areas are undergoing rapid glacier recession and stagnation; others are undergoing glacier growth. We take the instance of the rockslide-formed Lake Gojal and of the region’s glacier dynamics seen by satellite to show the promise of remote sensing to address disaster management and hazard identification. However, the biggest role of remote sensing should be in the identification of hazard-prone situations, such as areas where landslides or the development of dangerous glacier lakes is likely. Increased satellite surveillance and deployment of air- and land surface-borne sensor platforms, and in some cases surface or subsurface watercraft, may aid the characterization of the landscape, identify geologic and climatic instabilities, and identify vulnerabilities among the people and infrastructure. A broad-based remote sensing program should fit within a coherent regional/international approach to the key related issues of natural hazards, water resources, urban planning, food security, hydropower, and environmental conservation. Notably, these issues all are interlinked to transboundary hydrology and climate change.

  17. [Role of the oral care provider to call attention to child abuse].

    Science.gov (United States)

    Gruythuysen, R J M; Wiggelendam, J M

    2017-04-01

    The focus on child abuse has increased in recent years. In 2015, the Royal Dutch Association of Dentists (KNMT) revised the Sign Code 'child abuse and domestic violence'. The core of the Sign Code is formed by the compulsory 5-step action plan for the signalling of, among other things, (a suspicion of) child abuse that must be followed. Dealing professionally with child abuse places high demands on the knowledge and communication skills of the health care provider. If the demands are met, the health care provider is by law adequately protected against complaints. Many health care providers are still uncomfortable about applying the Sign Code. The number of contacts with Safe at Home for advice and reports coming from oral care amounts to only a few one-thousandths of the total number of contacts. In dealing with the neglecting of oral care, the most common form of child abuse in the area of dental care, professional action is usually still limited to symptom relief. Organised care via chain formation offers possibilities for the coordination of targeted action on child abuse.

  18. Respiratory diseases call for special attention from clinical and translational science.

    Science.gov (United States)

    Bai, Chunxue

    2013-12-01

    Respiratory diseases will become one of the top 3 leading causes of estimated mortality in 2020 and become about one third of total causes of estimated mortality. The journal of Translational Respiratory Medicine is a truly international, peer-reviewed journal devoted to the publication of articles on outstanding work with translational potentials between basic research and clinical application to understanding respiratory disease. Translational respiratory medicine will more focus on biomarker identification and validation in pulmonary diseases in combination with clinical informatics, targeted proteomics, bioinformatics, systems medicine, or mathematical science; on different translational strategies of cell-based therapy to clinical application to treat lung diseases; on targeted therapies in combination with personalized medicine; and on distant electronic medicine to monitor a large population of people's health. Translational Respiratory Medicine is an additional but unique opportunity for scientists and clinicians who work on pulmonary diseases to publish their outstanding findings, initiative results, and critical and perceptive opinions in the journal.

  19. Cognition, emotion, and attention.

    Science.gov (United States)

    Müller-Oehring, Eva M; Schulte, Tilman

    2014-01-01

    Deficits of attention, emotion, and cognition occur in individuals with alcohol abuse and addiction. This review elucidates the concepts of attention, emotion, and cognition and references research on the underlying neural networks and their compromise in alcohol use disorder. Neuroimaging research on adolescents with family history of alcoholism contributes to the understanding of pre-existing brain structural conditions and characterization of cognition and attention processes in high-risk individuals. Attention and cognition interact with other brain functions, including perceptual selection, salience, emotion, reward, and memory, through interconnected neural networks. Recent research reports compromised microstructural and functional network connectivity in alcoholism, which can have an effect on the dynamic tuning between brain systems, e.g., the frontally based executive control system, the limbic emotion system, and the midbrain-striatal reward system, thereby impeding cognitive flexibility and behavioral adaptation to changing environments. Finally, we introduce concepts of functional compensation, the capacity to generate attentional resources for performance enhancement, and brain structure recovery with abstinence. An understanding of the neural mechanisms of attention, emotion, and cognition will likely provide the basis for better treatment strategies for developing skills that enhance alcoholism therapy adherence and quality of life, and reduce the propensity for relapse. © 2014 Elsevier B.V. All rights reserved.

  20. Attention deficits and divorce.

    Science.gov (United States)

    Bouchard, Geneviève; Saint-Aubin, Jean

    2014-09-01

    Building on previous work on the role of attention deficits associated with the regulation of executive control in psychiatric disorders, we examine whether these attention deficits are related to an interpersonal disturbance, the experience of divorce. Attentional capacities of 95 randomly selected couples from the general population were measured with a well-established task, the Attentional Network Task, which assesses the efficiency of 3 attention networks (that is, alerting, orienting, and executive control). Among the 190 participants, 32 had experienced a divorce in the past. ANCOVAs were used to compare divorced people in marital or cohabiting unions with people in first unions in their performance on this purely cognitive task. Our findings indicate that divorced people who are currently living in a cohabiting relationship show significantly lower executive control than other adults living as couples, after controlling for sex, age, income, and education. This subgroup of divorced people not only exhibit greater difficulty in responding to some stimuli while ignoring irrelevant ones but also manifest cognitive deficits in conflict resolution. This study highlights the links between attention and the long-term maintenance of intimate relationships. Our results may have important implications for the identification of people at risk for divorce.

  1. Growth and Characterization of PDMS-Stamped Halide Perovskite Single Microcrystals

    NARCIS (Netherlands)

    Khoram, P.; Brittman, S.; Dzik, W.I.; Reek, J.N.H.; Garneett, E.C.

    2016-01-01

    Recently, halide perovskites have attracted considerable attention for optoelectronic applications, but further progress in this field requires a thorough understanding of the fundamental properties of these materials. Studying perovskites in their single-crystalline form provides a model system for

  2. Bat echolocation calls facilitate social communication.

    Science.gov (United States)

    Knörnschild, Mirjam; Jung, Kirsten; Nagy, Martina; Metz, Markus; Kalko, Elisabeth

    2012-12-07

    Bat echolocation is primarily used for orientation and foraging but also holds great potential for social communication. The communicative function of echolocation calls is still largely unstudied, especially in the wild. Eavesdropping on vocal signatures encoding social information in echolocation calls has not, to our knowledge, been studied in free-living bats so far. We analysed echolocation calls of the polygynous bat Saccopteryx bilineata and found pronounced vocal signatures encoding sex and individual identity. We showed experimentally that free-living males discriminate approaching male and female conspecifics solely based on their echolocation calls. Males always produced aggressive vocalizations when hearing male echolocation calls and courtship vocalizations when hearing female echolocation calls; hence, they responded with complex social vocalizations in the appropriate social context. Our study demonstrates that social information encoded in bat echolocation calls plays a crucial and hitherto underestimated role for eavesdropping conspecifics and thus facilitates social communication in a highly mobile nocturnal mammal.

  3. Selective Attention and Attention Switching: Towards a Unified Developmental Approach

    Science.gov (United States)

    Hanania, Rima; Smith, Linda B.

    2010-01-01

    We review and relate two literatures on the development of attention in children: one concerning flexible attention switching and the other concerning selective attention. The first is a growing literature on preschool children's performances in an attention-switching task indicating that children become more flexible in their attentional control…

  4. Connectivity supporting attention in children with attention deficit hyperactivity disorder

    Directory of Open Access Journals (Sweden)

    Anita D. Barber

    2015-01-01

    While CON–DMN anti-correlation is associated with improved attention in ADHD, other circuitry supports improved attention in TD children. Greater CON–DMN anti-correlation supported better attentional control in children with ADHD, but worse attentional control in TD children. On the other hand, greater DMN–occipital anti-correlation supported better attentional control in TD children.

  5. Attention and reading skills.

    Science.gov (United States)

    Commodari, Elena; Guarnera, Maria

    2005-04-01

    Attention plays a critical role in information processing. Its adequate functioning is required for correct development of complex cognitive abilities and regular scholastic progress. Children with attention deficits often have difficulties in reading, writing, and arithmetic. The present study investigated interactions among reading skills, overall scholastic performance as rated by teachers, and components of attention: visual reaction time, simple immediate span of attention, and selectivity. The sample was 98 students in the first and second years of public junior high school (age range 11-14 years, M = 12.6, SD = 1.2), i.e., with expected already well-established reading. Reading was evaluated using Comprehension, Accuracy, and Speed tests. Overall scholastic performance was obtained by means of teachers' ratings. Simple Reaction Time, Digit Span, and Color-Word Interference, included in a multitask computerized test, assessed attention. Analysis confirmed the hypothesis that the reading skills are strongly predictive of the Scholastic Assessment rated by the teachers. High scholastic ratings were correlated with Reading Speed and Accuracy rather than Reading Comprehension. Poor readers showed worse performances on the Digit Span test which measures simple immediate span of attention. Good and poor readers obtained a similar score on the Color-Word Interference task. This observation seems to contrast with the more common interpretation of this effect, suggesting that reading is an automatic process and, therefore, the semantic dimension overcomes the controlled perceptual one. According to other studies, an alternative explanation is suggested. In conclusion, present results confirm the hypothesis of a strong link among reading speed and accuracy, scholastic assessment as rated by teachers, simple immediate span of attention, and visual reaction time.

  6. Serial and parallel Si, Ge, and SiGe direct-write with scanning probes and conducting stamps

    Energy Technology Data Exchange (ETDEWEB)

    Vasko, Stephanie E.; Kapetanovic, Adnan; Talla, Vamsi; Brasino, Michael D.; Zhu, Zihua; Scholl, Andreas; Torrey, Jessica D.; Rolandi, Marco

    2011-05-16

    Precise materials integration in nanostructures is fundamental for future electronic and photonic devices. We demonstrate Si, Ge, and SiGe nanostructure direct-write with deterministic size, geometry, and placement control. The biased probe of an atomic force microscope (AFM) reacts diphenylsilane or diphenylgermane to direct-write carbon-free Si, Ge, and SiGe nano and heterostructures. Parallel directwrite is available on large areas by substituting the AFM probe with conducting microstructured stamps. This facile strategy can be easily expanded to a broad variety of semiconductor materials through precursor selection.

  7. Design and implementation of a nanosecond time-stamping readout system-on-chip for photo-detectors

    Energy Technology Data Exchange (ETDEWEB)

    Anvar, Shebli; Château, Frédéric; Le Provost, Hervé; Louis, Frédéric [CEA/Irfu/SEDI Gif-sur-Yvette (France); Manolopoulos, Konstantinos [Physics Department, University of Athens (Greece); Moudden, Yassir, E-mail: yassir.moudden@cea.fr [CEA/Irfu/SEDI Gif-sur-Yvette (France); Vallage, Bertrand [CEA/Irfu/SPP Gif-sur-Yvette (France); Zonca, Eric [CEA/Irfu/SEDI Gif-sur-Yvette (France)

    2014-01-21

    A readout system suitable for a large number of synchronized photo-detection units has been designed. Each unit embeds a specifically designed fully integrated communicating system based on Xilinx FPGA SoC technology. It runs the VxWorks real-time OS and a custom data acquisition software designed within the Ice middleware framework, resulting in a highly flexible, controllable and scalable distributed application. Clock distribution and delay calibration over customized fixed latency gigabit Ethernet links enable synchronous time-stamping of events with nanosecond precision. The implementation of this readout system on several data-collecting units as well as its performances are described.

  8. Conscious visual memory with minimal attention.

    Science.gov (United States)

    Pinto, Yair; Vandenbroucke, Annelinde R; Otten, Marte; Sligte, Ilja G; Seth, Anil K; Lamme, Victor A F

    2017-02-01

    Is conscious visual perception limited to the locations that a person attends? The remarkable phenomenon of change blindness, which shows that people miss nearly all unattended changes in a visual scene, suggests the answer is yes. However, change blindness is found after visual interference (a mask or a new scene), so that subjects have to rely on working memory (WM), which has limited capacity, to detect the change. Before such interference, however, a much larger capacity store, called fragile memory (FM), which is easily overwritten by newly presented visual information, is present. Whether these different stores depend equally on spatial attention is central to the debate on the role of attention in conscious vision. In 2 experiments, we found that minimizing spatial attention almost entirely erases visual WM, as expected. Critically, FM remains largely intact. Moreover, minimally attended FM responses yield accurate metacognition, suggesting that conscious memory persists with limited spatial attention. Together, our findings help resolve the fundamental issue of how attention affects perception: Both visual consciousness and memory can be supported by only minimal attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  9. Attentional retraining can reduce chocolate consumption.

    Science.gov (United States)

    Kemps, Eva; Tiggemann, Marika; Orr, Jenna; Grear, Justine

    2014-03-01

    There is emerging evidence that attentional biases are related to the consumption of substances such as alcohol and tobacco, and that attentional bias modification can reduce unwanted consumption of these substances. We present evidence for the first time to our knowledge that the same logical argument applies in the food and eating domain. We conducted two experiments that used a modified dot probe paradigm to train undergraduate women to direct their attention toward ("attend") or away from ("avoid") food cues (i.e., pictures of chocolate). In Experiment 1, attentional bias for chocolate cues increased in the "attend" group, and decreased in the "avoid" group. Experiment 2 showed that these training effects generalized to novel, previously unseen chocolate pictures. Importantly, attentional retraining affected chocolate consumption and craving. In both experiments, participants in the "avoid" group ate less chocolate in a so-called taste test than did those in the "attend" group. In addition, in Experiment 2, but not in Experiment 1, the "attend" group reported stronger chocolate cravings following training, whereas the "avoid" group reported less intense cravings. The results support predictions of cognitive-motivational models of craving and consumption that attentional biases play a causal role in consumption behavior. Furthermore, they present a promising avenue for tackling unwanted food cravings and (over)eating. © 2013 American Psychological Association

  10. Attention in Urban Foraging

    Directory of Open Access Journals (Sweden)

    Malcolm McCullough

    2013-05-01

    Full Text Available This position paper argues how there has to be much more to smart city learning than just wayshowing, and something better as augmented reality than covering the world with instructions. Attention has become something for many people to know better in an age of information superabundance. Embodied cognition explains how the work-ings of attention are not solely a foreground task, as if attention is something to pay. As digital media appear in ever more formats and contexts, their hybrids with physical form increasing influence how habitual engagement with persistent situations creates learning. Ambient information can just add to the distraction by multitasking, or it can support more favorable processes of shifting among different kinds of information with a particular intent. As one word for this latter process, foraging deserves more consideration in smart city learning

  11. Methodological challenges collecting parent phone-call healthcare utilization data.

    Science.gov (United States)

    Moreau, Paula; Crawford, Sybil; Sullivan-Bolyai, Susan

    2016-02-01

    Recommendations by the National Institute of Nursing Research and other groups have strongly encouraged nurses to pay greater attention to cost-effectiveness analysis when conducting research. Given the increasing prominence of translational science and comparative effective research, cost-effective analysis has become a basic tool in determining intervention value in research. Tracking phone-call communication (number of calls and context) with cross-checks between parents and healthcare providers is an example of this type of healthcare utilization data collection. This article identifies some methodological challenges that have emerged in the process of collecting this type of data in a randomized controlled trial: Parent education Through Simulation-Diabetes (PETS-D). We also describe ways in which those challenges have been addressed with comparison data results, and make recommendations for future research. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. The World Health Organization "Rehabilitation 2030: a call for action".

    Science.gov (United States)

    Gimigliano, Francesca; Negrini, Stefano

    2017-04-01

    February 6th-7th, 2017 might become a memorable date in the future of rehabilitation. On these two days, the World Health Organization (WHO) has summoned over 200 stakeholders in the Executive Board Room of the WHO Headquarters in Geneva, Switzerland. Their common aim was to a launch the "Rehabilitation 2030" call to action and to present the WHO Recommendations on rehabilitation in health systems. These initiatives are meant to draw attention to the increasing unmet need for rehabilitation in the world; to highlight the role of rehabilitation in achieving the Sustainable Development Goals proposed by the United Nations; to call for coordinated and concerted global action towards strengthening rehabilitation in health systems. The aim of this paper is to report on the scientific events of these 2 days, which will most likely mark the history of rehabilitation.

  13. The effects of call on L2 vocabulary acquisition

    OpenAIRE

    Cardoso, Gisele Luz

    2012-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão. Programa de Pós-Graduação em Letras/Inglês e Literatura Correspondente, Florianópolis, 2012 Abstract : Blended Learning (BL) has attracted the attention of L2 acquisition researchers, who understand that for L2 education to be successful, learners and teachers need to combine two dissimilar but complementary approaches, namely CALL and Face-to-Face interaction (Neumeier, 2005). This dissertation i...

  14. Bat echolocation calls: adaptation and convergent evolution

    OpenAIRE

    Jones, Gareth; Holderied, Marc W

    2007-01-01

    Bat echolocation calls provide remarkable examples of ‘good design’ through evolution by natural selection. Theory developed from acoustics and sonar engineering permits a strong predictive basis for understanding echolocation performance. Call features, such as frequency, bandwidth, duration and pulse interval are all related to ecological niche. Recent technological breakthroughs have aided our understanding of adaptive aspects of call design in free-living bats. Stereo videogrammetry, lase...

  15. Outsourcing an Effective Postdischarge Call Program

    Science.gov (United States)

    Meek, Kevin L.; Williams, Paula; Unterschuetz, Caryn J.

    2018-01-01

    To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge. PMID:29494453

  16. The function of Barbary macaque copulation calls.

    OpenAIRE

    Semple, S

    1998-01-01

    In a wide variety of animal species, females produce vocalizations specific to mating contexts. It has been proposed that these copulation calls function to incite males to compete for access to the calling female. Two separate advantages of inciting male-male competition in this way have been put forward. The first suggests that as a result of calling, females are only mated by the highest ranking male in the vicinity (indirect mate choice hypothesis). The second proposes that copulation cal...

  17. Wafer-scale patterning of reduced graphene oxide electrodes by transfer-and-reverse stamping for high performance OFETs.

    Science.gov (United States)

    Lee, Joong Suk; Kim, Nam Hee; Kang, Moon Sung; Yu, Hojeong; Lee, Dong Ryoul; Oh, Joon Hak; Chang, Suk Tai; Cho, Jeong Ho

    2013-08-26

    A wafer-scale patterning method for solution-processed graphene electrodes, named the transfer-and-reverse stamping method, is universally applicable for fabricating source/drain electrodes of n- and p-type organic field-effect transistors with excellent performance. The patterning method begins with transferring a highly uniform reduced graphene oxide thin film, which is pre-prepared on a glass substrate, onto hydrophobic silanized (rigid/flexible) substrates. Patterns of the as-prepared reduced graphene oxide films are then formed by modulating the surface energy of the films and selectively delaminating the films using an oxygen-plasma-treated elastomeric stamp with patterns. Reduced graphene oxide patterns with various sizes and shapes can be readily formed onto an entire wafer. Also, they can serve as the source/drain electrodes for benchmark n- and p-type organic field-effect transistors with enhanced performance, compared to those using conventional metal electrodes. These results demonstrate the general utility of this technique. Furthermore, this simple, inexpensive, and scalable electrode-patterning-technique leads to assembling organic complementary circuits onto a flexible substrate successfully. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Experimental study on the warm forming and quenching behavior for hot stamping of high-strength aluminum alloys

    Science.gov (United States)

    Degner, J.; Horn, A.; Merklein, M.

    2017-09-01

    Within the last decades, stringent regulations on fuel consumption, CO2 emissions and product recyclability forced the automotive sector to implement new strategies within the field of car body manufacturing. Due to their low density and good corrosion resistance, aluminum became one of the most relevant lightweight materials. Recently, especially high- strength aluminum alloys for structural components gained importance. Since the low formability of these alloys limits their application, there is a need for novel process strategies in order to enhance the forming behavior. One promising approach is the hot stamping of aluminum alloys. The combination of quenching and forming in one step after solution heat treatment leads to a significant improvement of the formability. Furthermore, higher manufacturing accuracy can be achieved due to reduced spring back. Within this contribution, the influence of forming temperature on the subsequent material behavior and the heat transfer during quenching will be analyzed. Therefore, the mechanical and thermal material characteristics such as flow behavior and heat transfer coefficient during hot stamping are investigated.

  19. A nanoscale conical polymethyl methacrylate (PMMA) sub-wavelength structure with a high aspect ratio realized by a stamping method.

    Science.gov (United States)

    Kim, Dae-Seon; Kim, Dong-Hyun; Jang, Jae-Hyung

    2013-04-08

    A high aspect ratio conical sub-wavelength structure (SWS) was designed by using rigorous coupled-wave analysis (RCWA) method and was realized on polymethyl methacrylate (PMMA) film using a stamping technique. The silicon template containing a hexagonal array of conical holes with a period of 350 nm and an aspect ratio of 2.8 was fabricated by electron-beam (e-beam) lithography followed by a two-step etching process. The SWS with a high aspect ratio was easily transferred from the fabricated silicon template to PMMA film using the stamping method. The replicated PMMA SWS has an array of cones with nanoscale tips and an aspect ratio higher than 2.8. The average reflectance and transmittance of the PMMA film with the conical SWS in the wavelength ranging from 500 and 1500 nm was improved from 7.1 and 91.1% to 4.3 and 94.2%, respectively, as compared to flat PMMA film.

  20. Fracture Profile and Crack Propagation of Ultra-High Strength Hot-Stamped Boron Steel During Mechanical Trimming Process

    Science.gov (United States)

    Han, Xianhong; Yang, Kun; Chen, Sisi; Chen, Jun

    2015-10-01

    Mechanical trimming process for ultra-high strength boron steel after hot stamping was carried out in this study. Shear and tensile tests were designed to analyze the influences of stress state on the fracture mode; trimmed fracture surface and profile were observed and compared to other commonly used steels such as DP980 and Q235 etc.; the crack propagation during trimming process was studied through step-by-step tests. The observation and analysis reveal that the fracture mode of hot-stamped boron steel is highly related to the stress state, it belongs to cleavage fracture on low stress triaxiality but dimple fracture on high stress triaxiality. Such phenomenon is reflected in the trimming process, during which the stress state changes from shear-dominated state to tensile-dominated state. In addition, the burnish zone of trimmed boron steel is much smaller than other high strength steels, and the profile of cutting surface shows an `S'-like shape which is destructive to the trimming tool. Moreover, during the trimming process, most martensite laths near the cutting edge are stretched and rotated markedly to the direction of the shear band, and the main crack expands along those grain boundaries, which may penetrate through a few martensite laths and form small crack branches.

  1. Using Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges.

    Science.gov (United States)

    Han, Chi-Jui; Chiang, Hsuan-Ping; Cheng, Yun-Chien

    2018-02-18

    In this study, polydimethylsiloxane (PDMS) and conductive carbon nanoparticles were combined to fabricate a conductive elastomer PDMS (CPDMS). A high sensitive and flexible CPDMS strain sensor is fabricated by using stamping-process based micro patterning. Compared with conventional sensors, flexible strain sensors are more suitable for medical applications but are usually fabricated by photolithography, which suffers from a large number of steps and difficult mass production. Hence, we fabricated flexible strain sensors using a stamping-process with fewer processes than photolithography. The piezoresistive coefficient and sensitivity of the flexible strain sensor were improved by sensor pattern design and thickness change. Micro-patterning is used to fabricate various CPDMS microstructure patterns. The effect of gauge pattern was evaluated with ANSYS simulations. The piezoresistance of the strain gauges was measured and the gauge factor determined. Experimental results show that the piezoresistive coefficient of CPDMS is approximately linear. Gauge factor measurement results show that the gauge factor of a 140.0 μm thick strain gauge with five grids is the highest.

  2. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    Science.gov (United States)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-05-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  3. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    International Nuclear Information System (INIS)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-01-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  4. Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

    Science.gov (United States)

    Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

    2018-04-01

    Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

  5. All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

    DEFF Research Database (Denmark)

    Mikkelsen, Morten Bo Lindholm; Letailleur, Alban A; Søndergård, Elin

    2011-01-01

    We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprin......We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination...... of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without...... expensive high-vacuum lithography and etching techniques. The applicability of the fabricated device for single-molecule studies is demonstrated by measuring the extension of DNA molecules of different lengths confined in the nanochannels....

  6. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Energy Technology Data Exchange (ETDEWEB)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C [CNRS, LAAS, 7 Avenue du Colonel Roche, F-31077 Toulouse Cedex 4 (France); Viallet, B; Ressier, L, E-mail: edague@laas.fr, E-mail: laurence.ressier@insa-toulouse.fr [Universite de Toulouse, LPCNO, INSA-CNRS-UPS, 135 Avenue de Rangueil, F-31077 Toulouse (France)

    2011-09-30

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  7. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Science.gov (United States)

    Dague, E.; Jauvert, E.; Laplatine, L.; Viallet, B.; Thibault, C.; Ressier, L.

    2011-09-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  8. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    International Nuclear Information System (INIS)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C; Viallet, B; Ressier, L

    2011-01-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  9. Event for the launch of the Georges Charpak postage stamp | 26-27 February | Prévessin site

    CERN Multimedia

    2016-01-01

    At the end of February, the French post office is releasing a new €0.70 stamp featuring an image of Georges Charpak. CERN is taking part in this event by hosting a temporary post office on the Prévessin site, which will sell the stamp with a special “first day” postmark before it goes on general sale.     Georges Charpak arrived at CERN in 1959 and, in the late 1960s, revolutionised particle detection technology by developing the multiwire proportional chamber. This technique brought particle detectors into the electronic era, setting physicists free from the laborious task of studying photographs one by one. In 1992, he was awarded the Nobel Prize in Physics for his invention. Charpak chambers are still used today in the LHC detectors and have paved the way for the technology in numerous other modern detectors. In the 1990s, Charpak was involved in developing medical applications based on particle detection technology. He was als...

  10. Educación de calle

    OpenAIRE

    Aguado Alonso, Carmen María

    2014-01-01

    Los cambios que está sufriendo nuestra sociedad generan nuevas realidades sociales y nuevos métodos de socialización modificando nuestro entorno. Uno de los principales lugares donde ocurre esto es en la calle. La Calle tiene un potencial educativo muy valioso. En ocasiones puede ser utilizado para “des - educar”, olvidado por instituciones sociales, políticas y educativas. Es importante que la Calle se convierta en un espacio de socialización educativa. La Calle tiene un pa...

  11. Call Duration Characteristics based on Customers Location

    Directory of Open Access Journals (Sweden)

    Žvinys Karolis

    2014-05-01

    Full Text Available Nowadays a lot of different researches are performed based on call duration distributions (CDD analysis. However, the majority of studies are linked with social relationships between the people. Therefore the scarcity of information, how the call duration is associated with a user's location, is appreciable. The goal of this paper is to reveal the ties between user's voice call duration and the location of call. For this reason we analyzed more than 5 million calls from real mobile network, which were made over the base stations located in rural areas, roads, small towns, business and entertainment centers, residential districts. According to these site types CDD’s and characteristic features for call durations are given and discussed. Submitted analysis presents the users habits and behavior as a group (not an individual. The research showed that CDD’s of customers being them in different locations are not equal. It has been found that users at entertainment, business centers are tend to talk much shortly, than people being at home. Even more CDD can be distorted strongly, when machinery calls are evaluated. Hence to apply a common CDD for a whole network it is not recommended. The study also deals with specific parameters of call duration for distinguished user groups, the influence of network technology for call duration is considered.

  12. Attention: Moral-Cognitive Geography.

    Science.gov (United States)

    Tuan, Yi-Fu

    1987-01-01

    This article is an essay on the importance of attention as a personal trait. Offers a definition of attention, reviews symptoms of inattention, and identifies the categories of objects which typically hold a person's attention. (JDH)

  13. Managerial Attention in International SMEs

    NARCIS (Netherlands)

    Fan, Jiasi

    2017-01-01

    Managerial attention affects organizational strategies and the resulting consequences. In the international business context, it is noted that how much attention managers give to the international marketplace, i.e., international attention, has profound implications for large global companies’

  14. Automated visual attention manipulation

    NARCIS (Netherlands)

    Bosse, T.; Lambalgen, R. van; Maanen, P.P. van; Treur, J.

    2009-01-01

    In this paper a system for visual attention manipulation is introduced and formally described. This system is part of the design of a software agent that supports naval crew in her task to compile a tactical picture of the situation in the field. A case study is described in hich the system is used

  15. Pain and attention

    NARCIS (Netherlands)

    Blom, J.H.G.

    2017-01-01

    The ability to sense pain may be considered as a prerequisite for human survival. The experience of pain helps humans to avoid the execution of actions that can seriously endanger their lives; pain is therefore evolutionarily predisposed to interrupt and capture attention. However, this supposed

  16. Visual attention and stability

    NARCIS (Netherlands)

    Mathot, Sebastiaan; Theeuwes, Jan

    2011-01-01

    In the present review, we address the relationship between attention and visual stability. Even though with each eye, head and body movement the retinal image changes dramatically, we perceive the world as stable and are able to perform visually guided actions. However, visual stability is not as

  17. Deep Visual Attention Prediction

    Science.gov (United States)

    Wang, Wenguan; Shen, Jianbing

    2018-05-01

    In this work, we aim to predict human eye fixation with view-free scenes based on an end-to-end deep learning architecture. Although Convolutional Neural Networks (CNNs) have made substantial improvement on human attention prediction, it is still needed to improve CNN based attention models by efficiently leveraging multi-scale features. Our visual attention network is proposed to capture hierarchical saliency information from deep, coarse layers with global saliency information to shallow, fine layers with local saliency response. Our model is based on a skip-layer network structure, which predicts human attention from multiple convolutional layers with various reception fields. Final saliency prediction is achieved via the cooperation of those global and local predictions. Our model is learned in a deep supervision manner, where supervision is directly fed into multi-level layers, instead of previous approaches of providing supervision only at the output layer and propagating this supervision back to earlier layers. Our model thus incorporates multi-level saliency predictions within a single network, which significantly decreases the redundancy of previous approaches of learning multiple network streams with different input scales. Extensive experimental analysis on various challenging benchmark datasets demonstrate our method yields state-of-the-art performance with competitive inference time.

  18. Attention and Distraction

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    2010-01-01

    This article aims to examine the interrelationship between attention and distraction in the reception of video installation art, a genre which is commonly associated with "immersion" and an intensified feeling of presence in the discourses on new media art and installation art. This tends to veil...

  19. time series modeling of daily abandoned calls in a call centre

    African Journals Online (AJOL)

    DJFLEX

    Models for evaluating and predicting the short periodic time series in daily abandoned calls in a call center are developed. Abandonment of calls due to impatient is an identified problem among most call centers. The two competing models were derived using Fourier series and the Box and Jenkins modeling approaches.

  20. Development and Validation of the Calling and Vocation Questionnaire (CVQ) and Brief Calling Scale (BCS)

    Science.gov (United States)

    Dik, Bryan J.; Eldridge, Brandy M.; Steger, Michael F.; Duffy, Ryan D.

    2012-01-01

    Research on work as a calling is limited by measurement concerns. In response, the authors introduce the multidimensional Calling and Vocation Questionnaire (CVQ) and the Brief Calling scale (BCS), instruments assessing presence of, and search for, a calling. Study 1 describes CVQ development using exploratory and confirmatory factor analysis…

  1. Time series modeling of daily abandoned calls in a call centre ...

    African Journals Online (AJOL)

    Models for evaluating and predicting the short periodic time series in daily abandoned calls in a call center are developed. Abandonment of calls due to impatient is an identified problem among most call centers. The two competing models were derived using Fourier series and the Box and Jenkins modeling approaches.

  2. Roll Call: The Importance of Teacher Attendance

    Science.gov (United States)

    Joseph, Nithya; Waymack, Nancy; Zielaski, Daniel

    2014-01-01

    While policymakers have been directing considerable attention to teacher effectiveness, one basic aspect of effectiveness has received relatively little attention: teacher attendance. No matter how engaging or talented teachers may be, they can only have an impact on student learning if they are in the classroom. This paper asks a simple question:…

  3. Bat echolocation calls: adaptation and convergent evolution.

    Science.gov (United States)

    Jones, Gareth; Holderied, Marc W

    2007-04-07

    Bat echolocation calls provide remarkable examples of 'good design' through evolution by natural selection. Theory developed from acoustics and sonar engineering permits a strong predictive basis for understanding echolocation performance. Call features, such as frequency, bandwidth, duration and pulse interval are all related to ecological niche. Recent technological breakthroughs have aided our understanding of adaptive aspects of call design in free-living bats. Stereo videogrammetry, laser scanning of habitat features and acoustic flight path tracking permit reconstruction of the flight paths of echolocating bats relative to obstacles and prey in nature. These methods show that echolocation calls are among the most intense airborne vocalizations produced by animals. Acoustic tracking has clarified how and why bats vary call structure in relation to flight speed. Bats using broadband echolocation calls adjust call design in a range-dependent manner so that nearby obstacles are localized accurately. Recent phylogenetic analyses based on gene sequences show that particular types of echolocation signals have evolved independently in several lineages of bats. Call design is often influenced more by perceptual challenges imposed by the environment than by phylogeny, and provides excellent examples of convergent evolution. Now that whole genome sequences of bats are imminent, understanding the functional genomics of echolocation will become a major challenge.

  4. The function of Barbary macaque copulation calls.

    Science.gov (United States)

    Semple, S

    1998-02-22

    In a wide variety of animal species, females produce vocalizations specific to mating contexts. It has been proposed that these copulation calls function to incite males to compete for access to the calling female. Two separate advantages of inciting male-male competition in this way have been put forward. The first suggests that as a result of calling, females are only mated by the highest ranking male in the vicinity (indirect mate choice hypothesis). The second proposes that copulation calling results in a female being mated by many males, thus promoting competition at the level of sperm (sperm competition hypothesis). In this paper, I give results from the first experimental study to test these hypotheses. Playback was used to examine the function of copulation calls of female Barbary macaques (Macaca sylvanus) in Gibraltar. Although rank did not affect lone males' likelihood of approaching copulation calls, when playbacks were given to pairs of males only the higher ranking individual approached. Moreover, females were mated significantly sooner after playback of their copulation call than after playback of a control stimulus. These results suggest that the copulation calls of female Barbary macaques play a key role in affecting patterns of male reproductive behaviour, not only providing an indirect mechanism of female choice, but also promoting sperm competition by reducing the interval between copulations. Potential fitness benefits of inciting male-male competition at these two levels are discussed.

  5. Bat echolocation calls: adaptation and convergent evolution

    Science.gov (United States)

    Jones, Gareth; Holderied, Marc W

    2007-01-01

    Bat echolocation calls provide remarkable examples of ‘good design’ through evolution by natural selection. Theory developed from acoustics and sonar engineering permits a strong predictive basis for understanding echolocation performance. Call features, such as frequency, bandwidth, duration and pulse interval are all related to ecological niche. Recent technological breakthroughs have aided our understanding of adaptive aspects of call design in free-living bats. Stereo videogrammetry, laser scanning of habitat features and acoustic flight path tracking permit reconstruction of the flight paths of echolocating bats relative to obstacles and prey in nature. These methods show that echolocation calls are among the most intense airborne vocalizations produced by animals. Acoustic tracking has clarified how and why bats vary call structure in relation to flight speed. Bats using broadband echolocation calls adjust call design in a range-dependent manner so that nearby obstacles are localized accurately. Recent phylogenetic analyses based on gene sequences show that particular types of echolocation signals have evolved independently in several lineages of bats. Call design is often influenced more by perceptual challenges imposed by the environment than by phylogeny, and provides excellent examples of convergent evolution. Now that whole genome sequences of bats are imminent, understanding the functional genomics of echolocation will become a major challenge. PMID:17251105

  6. Bat echolocation calls: Orientation to communication

    Science.gov (United States)

    Fenton, M. Brock

    2004-05-01

    Bats hunting flying insects adjust the design of their echolocation calls according to the situation in which they forage and stage in an attack. Changes in call design across attack sequences alert other bats within earshot to the presence of prey, demonstrating a continuum in roles for biosonar signals between orientation and communication. Many aerial-feeding bats change the design of their echolocation calls in the presence of echolocating conspecifics. Bats may change frequency parameters, durations, and/or intensities of their calls. While a variety of free-tailed bats (Molossidae Otomops martiensseni, Tadarida teniotis, Molossus molossus) consistently change their echolocation calls when more than one bat is flying in an area, at least one sheath-tailed bat (Emballonuridae Taphozous perforatus) does not. Changes in echolocation calls may maximize jamming avoidance and/or enhance the communicative function of the calls. The data for molossids support the hypothesis that when hunting some species fly in formation. Here, variation in individual call design could provide positional information and reduce the chances of mid-air collisions.

  7. CALL FOR EXTENDED CONCEPT NOTES ECOHEALTH CHAIRS ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Marie-Isabelle Beyer

    CALL FOR EXTENDED CONCEPT NOTES. Page 1 of 1. ECOHEALTH CHAIRS in HEALTH and GLOBAL ENVIRONMENTAL CHANGE in. SUB-SAHARAN AFRICA. Eligible countries. Organizations and researchers based in the eligible country list below can apply as team to this Call. Within limits of. Canadian law and ...

  8. 17 CFR 31.18 - Margin calls.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Margin calls. 31.18 Section 31....18 Margin calls. (a) No leverage transaction merchant shall liquidate a leverage contract because of a margin deficiency without effecting personal contact with the leverage customer. If a leverage...

  9. Answering the "Call of the Mountain"

    NARCIS (Netherlands)

    Chaves Villegas, Martha

    2016-01-01

    In response to the age of the ‘anthropocene,’ as some authors are calling this epoch in which one single species is disrupting major natural systems (Steffen et al 2011), there are calls for more radical, learning-based sustainability that generates deep transformations in individuals and

  10. Call center performance with direct response advertising

    NARCIS (Netherlands)

    M. Kiygi Calli (Meltem); M. Weverbergh (Marcel); Ph.H.B.F. Franses (Philip Hans)

    2017-01-01

    textabstractThis study investigates the manpower planning and the performance of a national call center dealing with car repairs and on the road interventions. We model the impact of advertising on the capacity required. The starting point is a forecasting model for the incoming calls, where we take

  11. Peafowl antipredator calls encode information about signalers.

    Science.gov (United States)

    Yorzinski, Jessica L

    2014-02-01

    Animals emit vocalizations that convey information about external events. Many of these vocalizations, including those emitted in response to predators, also encode information about the individual that produced the call. The relationship between acoustic features of antipredator calls and information relating to signalers (including sex, identity, body size, and social rank) were examined in peafowl (Pavo cristatus). The "bu-girk" antipredator calls of male and female peafowl were recorded and 20 acoustic parameters were automatically extracted from each call. Both the bu and girk elements of the antipredator call were individually distinctive and calls were classified to the correct signaler with over 90% and 70% accuracy in females and males, respectively. Females produced calls with a higher fundamental frequency (F0) than males. In both females and males, body size was negatively correlated with F0. In addition, peahen rank was related to the duration, end mean frequency, and start harmonicity of the bu element. Peafowl antipredator calls contain detailed information about the signaler and can potentially be used by receivers to respond to dangerous situations.

  12. The Call to Teach and Teacher Hopefulness

    Science.gov (United States)

    Bullough, Robert V., Jr.; Hall-Kenyon, Kendra M.

    2011-01-01

    The purpose of this paper is to explore teacher motivation and well-being. Our analysis focuses on two central concepts, the notion of a "calling to teach" and of teacher "hopefulness." Data from 205 preservice and inservice teachers were collected to determine teachers' sense of calling and level of hope. Results indicate that overwhelmingly,…

  13. Monitoring method call sequences using annotations

    NARCIS (Netherlands)

    B. Nobakht (Behrooz); F.S. de Boer (Frank); M.M. Bonsangue (Marcello); C.P.T. de Gouw (Stijn); M.M. Jaghouri (MohammadMahdi)

    2014-01-01

    htmlabstractIn this paper we introduce JMSeq, a Java-based tool for monitoring sequences of method calls. JMSeq provides a simple but expressive language to specify the observables of a Java program in terms of sequences of possibly nested method calls. Similar to many monitoring-oriented

  14. Source levels of foraging humpback whale calls.

    Science.gov (United States)

    Fournet, Michelle E H; Matthews, Leanna P; Gabriele, Christine M; Mellinger, David K; Klinck, Holger

    2018-02-01

    Humpback whales produce a wide range of low- to mid-frequency vocalizations throughout their migratory range. Non-song "calls" dominate this species' vocal repertoire while on high-latitude foraging grounds. The source levels of 426 humpback whale calls in four vocal classes were estimated using a four-element planar array deployed in Glacier Bay National Park and Preserve, Southeast Alaska. There was no significant difference in source levels between humpback whale vocal classes. The mean call source level was 137 dB RMS re 1 μPa @ 1 m in the bandwidth of the call (range 113-157 dB RMS re 1 μPa @ 1 m), where bandwidth is defined as the frequency range from the lowest to the highest frequency component of the call. These values represent a robust estimate of humpback whale source levels on foraging grounds and should append earlier estimates.

  15. Call Admission Control in Mobile Cellular Networks

    CERN Document Server

    Ghosh, Sanchita

    2013-01-01

    Call Admission Control (CAC) and Dynamic Channel Assignments (DCA) are important decision-making problems in mobile cellular communication systems. Current research in mobile communication considers them as two independent problems, although the former greatly depends on the resulting free channels obtained as the outcome of the latter. This book provides a solution to the CAC problem, considering DCA as an integral part of decision-making for call admission. Further, current technical resources ignore movement issues of mobile stations and fluctuation in network load (incoming calls) in the control strategy used for call admission. In addition, the present techniques on call admission offers solution globally for the entire network, instead of considering the cells independently.      CAC here has been formulated by two alternative approaches. The first approach aimed at handling the uncertainty in the CAC problem by employing fuzzy comparators.  The second approach is concerned with formulation of CAC ...

  16. Call cultures in orang-utans?

    Directory of Open Access Journals (Sweden)

    Serge A Wich

    Full Text Available BACKGROUND: Several studies suggested great ape cultures, arguing that human cumulative culture presumably evolved from such a foundation. These focused on conspicuous behaviours, and showed rich geographic variation, which could not be attributed to known ecological or genetic differences. Although geographic variation within call types (accents has previously been reported for orang-utans and other primate species, we examine geographic variation in the presence/absence of discrete call types (dialects. Because orang-utans have been shown to have geographic variation that is not completely explicable by genetic or ecological factors we hypothesized that this will be similar in the call domain and predict that discrete call type variation between populations will be found. METHODOLOGY/PRINCIPAL FINDINGS: We examined long-term behavioural data from five orang-utan populations and collected fecal samples for genetic analyses. We show that there is geographic variation in the presence of discrete types of calls. In exactly the same behavioural context (nest building and infant retrieval, individuals in different wild populations customarily emit either qualitatively different calls or calls in some but not in others. By comparing patterns in call-type and genetic similarity, we suggest that the observed variation is not likely to be explained by genetic or ecological differences. CONCLUSION/SIGNIFICANCE: These results are consistent with the potential presence of 'call cultures' and suggest that wild orang-utans possess the ability to invent arbitrary calls, which spread through social learning. These findings differ substantially from those that have been reported for primates before. First, the results reported here are on dialect and not on accent. Second, this study presents cases of production learning whereas most primate studies on vocal learning were cases of contextual learning. We conclude with speculating on how these findings might

  17. Selective Attention and Attention Switching: Toward a Unified Developmental Approach

    OpenAIRE

    Hanania, Rima; Smith, Linda B.

    2010-01-01

    We review and relate two literatures on the development of attention in children: one concerning flexible attention switching and the other concerning selective attention. The first is a growing literature on preschool children’s performances in an attention switching task indicating that children become more flexible in their attentional control during the preschool years. The second literature encompasses a large and robust set of phenomena for the same developmental period that indicate a ...

  18. Attention, communication, and schizophrenia.

    OpenAIRE

    Rund, B. R.

    1985-01-01

    The paper starts by drawing the historical lines for and giving an account of the main methods and results from an empirical investigation of cognitive disorders in schizophrenics and communication deviances in their parents. The focus of the report is on the significant correlations that were found between some aspects of parents' style of communication and offsprings' cognitive functioning. On the basis of the empirical study, the relationship between attention and communication is discusse...

  19. Superior Ambulance Call Out Rate Forecasting Using Meteorological Data

    Science.gov (United States)

    Mahmood, M. A.; Thornes, J. E.; Bloss, W.; Pope, F.

    2015-12-01

    Ambulances are an integral part of a country's infrastructure ensuring its citizens and visitors are kept healthy. The impact of weather, climate and climate change on ambulance services around the world has received increasing attention in recent years but most studies have been area specific and there is a need to establish basic relationships between ambulance data (both response and illness data) and meteorological parameters. In this presentation, the effects of temperature and relative humidity on ambulance call out rates for different medical categories will be investigated. We use call out data obtained from the London Ambulance Service (LAS) and meteorological data from a central London meteorological station. A time-series analysis was utilized to understand the relation between temperature, relative humidity, air pollutants and different call out categories. There are statistically significant relationships between mean temperature and ambulance callout rate for most of the categories investigated. Most categories show a negative dependence on temperature, i.e. call outs increase with decreasing temperature but some categories showed a positive dependence such as alcohol related call outs. Relative humidity is significant for some categories but in general is much less important than temperature. Significant time lag effects were observed for most of the categories related to infectious illnesses, which are transferrable through human contact. These findings support the opinion that ambulance attendance callouts records are an effective and well-timed source of data and can be used for health early warning systems. Furthermore the presented results can much improve our understanding of the relationships between meteorological conditions and human health thereby allowing for better prediction of ambulance use through the application of long and short-term weather forecasts.

  20. External GSM phone calls now made simpler

    CERN Multimedia

    2007-01-01

    On 2 July, the IT/CS Telecom Service introduced a new service making external calls from CERN GSM phones easier. A specific prefix is no longer needed for calls outside CERN. External calls from CERN GSM phones are to be simplified. It is no longer necessary to use a special prefix to call an external number from the CERN GSM network.The Telecom Section of the IT/CS Group is introducing a new system that will make life easier for GSM users. It is no longer necessary to use a special prefix (333) to call an external number from the CERN GSM network. Simply dial the number directly like any other Swiss GSM customer. CERN currently has its own private GSM network with the Swiss mobile operator, Sunrise, covering the whole of Switzerland. This network was initially intended exclusively for calls between CERN numbers (replacing the old beeper system). A special system was later introduced for external calls, allowing them to pass thr...

  1. Hot stamping of an Al-Li alloy: a feasibility study

    OpenAIRE

    Gao, H; Weng, T; Liu, J; Li, Z; Wang, L

    2016-01-01

    The feasibility of forming a third generation aluminium-lithium alloy (AA2060) into a complex shaped panel component, was studied by using an advanced forming technology called solution heat treatment, cold die forming and in-die quenching (HFQa) process. The main challenges using HFQ technology to form complex shaped AA2060 component was to find out optimum forming parameters, such as forming temperature, forming speed, lubrication condition and blank holding force. In this paper, the optimu...

  2. Attitude of Farmers towards Kisan Call Centres

    Directory of Open Access Journals (Sweden)

    Shely Mary Koshy

    2017-09-01

    Full Text Available The present study was conducted to measure the attitude of farmers in Kerala, India towards Kisan Call Centre (KCC. Kisan Call Centre provides free agricultural advisory services to every citizen involved in agriculture through a toll free number. One hundred and fifty farmers who have utilized the Kisan Call Centre service were selected from the database of KCC. The results showed that the respondents had moderately favourable attitude towards KCC followed by highly favourable attitude. The variables digital divide, temporal awareness on KCC, satisfaction towards KCC and utilization of KCC were found to have a positive correlation with the attitude of respondents towards KCC.

  3. Echolocation calls and communication calls are controlled differentially in the brainstem of the bat Phyllostomus discolor

    Science.gov (United States)

    Fenzl, Thomas; Schuller, Gerd

    2005-01-01

    Background Echolocating bats emit vocalizations that can be classified either as echolocation calls or communication calls. Neural control of both types of calls must govern the same pool of motoneurons responsible for vocalizations. Electrical microstimulation in the periaqueductal gray matter (PAG) elicits both communication and echolocation calls, whereas stimulation of the paralemniscal area (PLA) induces only echolocation calls. In both the PAG and the PLA, the current thresholds for triggering natural vocalizations do not habituate to stimuli and remain low even for long stimulation periods, indicating that these structures have relative direct access to the final common pathway for vocalization. This study intended to clarify whether echolocation calls and communication calls are controlled differentially below the level of the PAG via separate vocal pathways before converging on the motoneurons used in vocalization. Results Both structures were probed simultaneously in a single experimental approach. Two stimulation electrodes were chronically implanted within the PAG in order to elicit either echolocation or communication calls. Blockade of the ipsilateral PLA site with iontophoretically application of the glutamate antagonist kynurenic acid did not impede either echolocation or communication calls elicited from the PAG. However, blockade of the contralateral PLA suppresses PAG-elicited echolocation calls but not communication calls. In both cases the blockade was reversible. Conclusion The neural control of echolocation and communication calls seems to be differentially organized below the level of the PAG. The PLA is an essential functional unit for echolocation call control before the descending pathways share again the final common pathway for vocalization. PMID:16053533

  4. Online decoding of object‐based attention using real‐time fMRI

    NARCIS (Netherlands)

    Niazi, A.M.; Broek, P.L.C. van den; Klanke, S.; Barth, M.; Poel, M.; Desain, P.W.M.; Gerven, M.A.J. van

    2015-01-01

    Visual attention is used to selectively filter relevant information depending on current task demands and goals. Visual attention is called object-based attention when it is directed to coherent forms or objects in the visual field. This study used real-time functional magnetic resonance imaging for

  5. Different states in visual working memory: when it guides attention and when it does not

    NARCIS (Netherlands)

    Olivers, C.N.L.; Peters, J.; Houtkamp, R.; Roelfsema, P.R.

    2011-01-01

    Recent studies have revealed a strong relationship between visual working memory and selective attention, such that attention is biased by what is currently on our mind. However, other data show that not all memorized items influence the deployment of attention, thus calling for a distinction within

  6. Productive Strategies Call for Proposals | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    supported scoping study (103259) indicates that value chain analysis merits serious attention as a means to enhance the flow of benefits from the global economy to poor rural people. To date, value chain analysis has rarely included disaggregated ...

  7. Do Children in Rural Areas Still Have Different Access to Health Care? Results from a Statewide Survey of Oregon's Food Stamp Population

    Science.gov (United States)

    Devoe, Jennifer E.; Krois, Lisa; Stenger, Rob

    2009-01-01

    Purpose: To determine if rural residence is independently associated with different access to health care services for children eligible for public health insurance. Methods: We conducted a mail-return survey of 10,175 families randomly selected from Oregon's food stamp population (46% rural and 54% urban). With a response rate of 31%, we used a…

  8. Use of the Performance Diagnostic Checklist to Select an Intervention Designed to Increase the Offering of Promotional Stamps at Two Sites of a Restaurant Franchise

    Science.gov (United States)

    Rodriguez, Manuel; Wilder, David A.; Therrien, Kelly; Wine, Byron; Miranti, Reylissa; Daratany, Kenneth; Salume, Gloria; Baranovsky, Greg; Rodriquez, Matias

    2006-01-01

    The performance diagnostic checklist (PDC) was administered to examine the variables influencing the offering of promotional stamps by employees at two sites of a restaurant franchise. PDC results suggested that a lack of appropriate antecedents, equipment and processes, and consequences were responsible for the deficits. Based on these results,…

  9. The Confluence of Sociology, Statistics, and Public Policy in the Quality Control of the Food Stamps, AFDC, and Medicaid Family Assistance Programs.

    Science.gov (United States)

    Press, S. James; Tanur, Judith M.

    1991-01-01

    Relevance of the intersection of sociology, statistics, and public policy to the study of quality control in three family assistance programs--food stamps, Aid to Families with Dependent Children (AFDC), and Medicaid--is reviewed using a study by the National Academy of Sciences of methods for improving quality control systems. (SLD)

  10. The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

    Science.gov (United States)

    Shao, Z.; Li, N.; Lin, J.

    2017-09-01

    The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

  11. Do Food Stamps without Education Improve the Nutrient Intake and Food-Related Behaviors of Recipients? Food Assistance Needs of the South's Vulnerable Populations.

    Science.gov (United States)

    Cason, Katherine L.; Cox, Ruby H.; Burney, Janie L.

    This study examined the effect of food assistance on the dietary patterns of households in South Carolina, Tennessee, and Virginia. Data was collected from 6,969 participants in the Expanded Food and Nutrition Education Program (EFNEP) and 3,552 participants in the Food Stamp Nutrition Education Program (FSNEP). EFNEP and FSNEP teach low-income…

  12. The call of blind Bartimaeus (Mark 10:46-52

    Directory of Open Access Journals (Sweden)

    Maarten J.J. Menken

    2005-10-01

    Full Text Available The story of Blind Bartimaeus (Mk 10:46-52 displays some traits that are unusual in a synoptic healing miracle and it displays most of the features of a call story. The genesis of the narration may account for the combination of these two genres: the story about the calling of the blind beggar Bartimaeus has been expanded by that of the healing of the blind man, where Jesus focuses attention on his faith. Next, the crowd was introduced to highlight Bartimaeus’ faith. Finally, the pericope was adapted to fit into Mark’s Gospel. The main editorial contribution of the evangelist is his contextualizing of the scene at the end of the section 8:27-10:52, which deals with Jesus’ journey to Jerusalem, to suffering and death. In this episode Jesus calls Bartimaeus to follow him on his way. Mark added significance to the story by contrasting Bartimaeus with other characters, especially Peter, James and John, the foremost three disciples. This contrast may imply some criticism of leadership in the Markan community.

  13. 76 FR 4896 - Call for Candidates

    Science.gov (United States)

    2011-01-27

    ... designated to establish generally accepted accounting principles for federal government entities. Generally, non-federal Board members are selected from the general financial community, the accounting and... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Call for Candidates AGENCY: Federal Accounting...

  14. 78 FR 76257 - Rural Call Completion

    Science.gov (United States)

    2013-12-17

    ..., the Alliance for Telecommunications Industry Solutions (ATIS) released the Intercarrier Call... Telecommunications Carriers; that category is defined as follows: ``This industry comprises establishments primarily... Telecommunications. The Census Bureau defines this industry as including ``establishments primarily engaged in...

  15. Attention: the claustrum.

    Science.gov (United States)

    Goll, Yael; Atlan, Gal; Citri, Ami

    2015-08-01

    The claustrum is a mysterious thin sheet of neurons lying between the insular cortex and the striatum. It is reciprocally connected with almost all cortical areas, including motor, somatosensory, visual, auditory, limbic, associative, and prefrontal cortices. In addition, it receives neuromodulatory input from subcortical structures. A decade ago, Sir Francis Crick and Christof Koch published an influential review proposing the claustrum as the 'seat of consciousness', spurring a revival of interest in the claustrum. We review the literature on the claustrum, emphasizing recent discoveries, and develop a detailed hypothesis describing a role for the claustrum in the segregation of attention. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Communication cliques in mobile phone calling networks

    Science.gov (United States)

    Li, Ming-Xia; Xie, Wen-Jie; Jiang, Zhi-Qiang; Zhou, Wei-Xing

    2015-11-01

    People in modern societies form different social networks through numerous means of communication. These communication networks reflect different aspects of human's societal structure. The billing records of calls among mobile phone users enable us to construct a directed calling network (DCN) and its Bonferroni network (SVDCN) in which the preferential communications are statistically validated. Here we perform a comparative investigation of the cliques of the original DCN and its SVDCN constructed from the calling records of more than nine million individuals in Shanghai over a period of 110 days. We find that the statistical properties of the cliques of the two calling networks are qualitatively similar and the clique members in the DCN and the SVDCN exhibit idiosyncratic behaviors quantitatively. Members in large cliques are found to be spatially close to each other. Based on the clique degree profile of each mobile phone user, the most active users in the two calling networks can be classified in to several groups. The users in different groups are found to have different calling behaviors. Our study unveils interesting communication behaviors among mobile phone users that are densely connected to each other.

  17. Stable Atlas-based Mapped Prior (STAMP) machine-learning segmentation for multicenter large-scale MRI data.

    Science.gov (United States)

    Kim, Eun Young; Magnotta, Vincent A; Liu, Dawei; Johnson, Hans J

    2014-09-01

    Machine learning (ML)-based segmentation methods are a common technique in the medical image processing field. In spite of numerous research groups that have investigated ML-based segmentation frameworks, there remains unanswered aspects of performance variability for the choice of two key components: ML algorithm and intensity normalization. This investigation reveals that the choice of those elements plays a major part in determining segmentation accuracy and generalizability. The approach we have used in this study aims to evaluate relative benefits of the two elements within a subcortical MRI segmentation framework. Experiments were conducted to contrast eight machine-learning algorithm configurations and 11 normalization strategies for our brain MR segmentation framework. For the intensity normalization, a Stable Atlas-based Mapped Prior (STAMP) was utilized to take better account of contrast along boundaries of structures. Comparing eight machine learning algorithms on down-sampled segmentation MR data, it was obvious that a significant improvement was obtained using ensemble-based ML algorithms (i.e., random forest) or ANN algorithms. Further investigation between these two algorithms also revealed that the random forest results provided exceptionally good agreement with manual delineations by experts. Additional experiments showed that the effect of STAMP-based intensity normalization also improved the robustness of segmentation for multicenter data sets. The constructed framework obtained good multicenter reliability and was successfully applied on a large multicenter MR data set (n>3000). Less than 10% of automated segmentations were recommended for minimal expert intervention. These results demonstrate the feasibility of using the ML-based segmentation tools for processing large amount of multicenter MR images. We demonstrated dramatically different result profiles in segmentation accuracy according to the choice of ML algorithm and intensity

  18. Attention to memory: orienting attention to sound object representations.

    Science.gov (United States)

    Backer, Kristina C; Alain, Claude

    2014-01-01

    Despite a growing acceptance that attention and memory interact, and that attention can be focused on an active internal mental representation (i.e., reflective attention), there has been a paucity of work focusing on reflective attention to 'sound objects' (i.e., mental representations of actual sound sources in the environment). Further research on the dynamic interactions between auditory attention and memory, as well as its degree of neuroplasticity, is important for understanding how sound objects are represented, maintained, and accessed in the brain. This knowledge can then guide the development of training programs to help individuals with attention and memory problems. This review article focuses on attention to memory with an emphasis on behavioral and neuroimaging studies that have begun to explore the mechanisms that mediate reflective attentional orienting in vision and more recently, in audition. Reflective attention refers to situations in which attention is oriented toward internal representations rather than focused on external stimuli. We propose four general principles underlying attention to short-term memory. Furthermore, we suggest that mechanisms involved in orienting attention to visual object representations may also apply for orienting attention to sound object representations.

  19. Selective attention reduces physiological noise in the external ear canals of humans. II: Visual attention

    Science.gov (United States)

    Walsh, Kyle P.; Pasanen, Edward G.; McFadden, Dennis

    2014-01-01

    Human subjects performed in several behavioral conditions requiring, or not requiring, selective attention to visual stimuli. Specifically, the attentional task was to recognize strings of digits that had been presented visually. A nonlinear version of the stimulus-frequency otoacoustic emission (SFOAE), called the nSFOAE, was collected during the visual presentation of the digits. The segment of the physiological response discussed here occurred during brief silent periods immediately following the SFOAE-evoking stimuli. For all subjects tested, the physiological-noise magnitudes were substantially weaker (less noisy) during the tasks requiring the most visual attention. Effect sizes for the differences were >2.0. Our interpretation is that cortico-olivo influences adjusted the magnitude of efferent activation during the SFOAE-evoking stimulation depending upon the attention task in effect, and then that magnitude of efferent activation persisted throughout the silent period where it also modulated the physiological noise present. Because the results were highly similar to those obtained when the behavioral conditions involved auditory attention, similar mechanisms appear to operate both across modalities and within modalities. Supplementary measurements revealed that the efferent activation was spectrally global, as it was for auditory attention. PMID:24732070

  20. Selective attention reduces physiological noise in the external ear canals of humans. I: Auditory attention

    Science.gov (United States)

    Walsh, Kyle P.; Pasanen, Edward G.; McFadden, Dennis

    2014-01-01

    In this study, a nonlinear version of the stimulus-frequency OAE (SFOAE), called the nSFOAE, was used to measure cochlear responses from human subjects while they simultaneously performed behavioral tasks requiring, or not requiring, selective auditory attention. Appended to each stimulus presentation, and included in the calculation of each nSFOAE response, was a 30-ms silent period that was used to estimate the level of the inherent physiological noise in the ear canals of our subjects during each behavioral condition. Physiological-noise magnitudes were higher (noisier) for all subjects in the inattention task, and lower (quieter) in the selective auditory-attention tasks. These noise measures initially were made at the frequency of our nSFOAE probe tone (4.0 kHz), but the same attention effects also were observed across a wide range of frequencies. We attribute the observed differences in physiological-noise magnitudes between the inattention and attention conditions to different levels of efferent activation associated with the differing attentional demands of the behavioral tasks. One hypothesis is that when the attentional demand is relatively great, efferent activation is relatively high, and a decrease in the gain of the cochlear amplifier leads to lower-amplitude cochlear activity, and thus a smaller measure of noise from the ear. PMID:24732069

  1. On-call work and physicians' turnover intention: the moderating effect of job strain.

    Science.gov (United States)

    Heponiemi, Tarja; Presseau, Justin; Elovainio, Marko

    2016-01-01

    Physician shortage and turnover are major problems worldwide. On-call duties may be among the risk factors of high turnover rates among physicians. We investigated whether having on-call duties is associated with physicians' turnover intention and whether job strain variables moderate this association. The present study was a cross-sectional questionnaire study among 3324 (61.6% women) Finnish physicians. The analyses were conducted using analyses of covariance adjusted for age, gender, response format, specialization status and employment sector. The results showed that job strain moderated the association between being on-call and turnover intention. The highest levels of turnover intention were among those who had on-call duties and high level of job strain characterized by high demands and low control opportunities. The lowest levels of turnover intention were among those who were not on-call and who had low strain involving low demands and high control. Also, job demands moderated the association between being on-call and turnover intention; turnover intention levels were higher among those with on-call duties and high demands than those being on-call and low demands. To conclude, working on-call was related to physicians' turnover intention particularly in those with high job strain. Health care organizations should focus more attention on working arrangements and scheduling of on-call work, provide a suitable working pace and implement means to increase physicians' participation and control over their job.

  2. Hot stamping of an Al-Li alloy: A feasibility study

    OpenAIRE

    Gao Haoxiang; Weng Tianxin; Liu Jun; Li Chang; Li Zhiqiang; Wang Liliang

    2015-01-01

    The feasibility of forming a third generation aluminium-lithium alloy (AA2060) into a complex shaped panel component, was studied by using an advanced forming technology called solution heat treatment, cold die forming and in-die quenching (HFQ*) process. The flow stresses of AA2060 were obtained at different temperatures ranging from 350 to 520 oC at the strain rate of 1 s−1. The suitable temperature to achieve the adequate ductility was found at 470 oC. By forming the AA2060 blanks at the o...

  3. What does Attention in Neural Machine Translation Pay Attention to?

    NARCIS (Netherlands)

    Ghader, H.; Monz, C.; Kondrak, G.; Watanabe, T.

    2017-01-01

    Attention in neural machine translation provides the possibility to encode relevant parts of the source sentence at each translation step. As a result, attention is considered to be an alignment model as well. However, there is no work that specifically studies attention and provides analysis of

  4. Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

    Science.gov (United States)

    Brittain, Harry G

    2016-01-01

    Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates. © The Author(s) 2015.

  5. Attention Deficit Hyperactivity Disorder

    Science.gov (United States)

    Matthews, Marguerite; Nigg, Joel T.

    2014-01-01

    Over the last two decades, there have been numerous technical and methodological advances available to clinicians and researchers to better understand attention deficit hyperactivity disorder (ADHD) and its etiology. Despite the growing body of literature investigating the disorder’s pathophysiology, ADHD remains a complex psychiatric disorder to characterize. This chapter will briefly review the literature on ADHD, with a focus on its history, the current genetic insights, neurophysiologic theories, and the use of neuroimaging to further understand the etiology. We address some of the major concerns that remain unclear about ADHD, including subtype instability, heterogeneity, and the underlying neural correlates that define the disorder. We highlight that the field of ADHD is rapidly evolving; the descriptions provided here will hopefully provide a sturdy foundation for which to build and improve our understanding of the disorder. PMID:24214656

  6. Attention deficit hyperactivity disorder (ADHD)

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/001551.htm Attention deficit hyperactivity disorder To use the sharing features on this page, please enable JavaScript. Attention deficit hyperactivity disorder (ADHD) is a problem caused ...

  7. Practicing the Attentional Dwell Away?

    DEFF Research Database (Denmark)

    Petersen, Anders; Kyllingsbæk, Søren; Bundesen, Claus

    2007-01-01

    is known as the attentional dwell time (e.g. Duncan, Ward, Shapiro, 1994). Previous studies of attentional dwell time have all used naive subjects running few (.... The results suggest that the majority of subjects may learn to optimize their performance reducing the attentional dwell time effect substantially. Further, the reduction in the attentional dwell time effect seems to be closely linked to the ability of the subject to inhibit eye movements while performing...

  8. Automated tetraploid genotype calling by hierarchical clustering.

    Science.gov (United States)

    Schmitz Carley, Cari A; Coombs, Joseph J; Douches, David S; Bethke, Paul C; Palta, Jiwan P; Novy, Richard G; Endelman, Jeffrey B

    2017-04-01

    New software to make tetraploid genotype calls from SNP array data was developed, which uses hierarchical clustering and multiple F1 populations to calibrate the relationship between signal intensity and allele dosage. SNP arrays are transforming breeding and genetics research for autotetraploids. To fully utilize these arrays, the relationship between signal intensity and allele dosage must be calibrated for each marker. We developed an improved computational method to automate this process, which is provided as the R package ClusterCall. In the training phase of the algorithm, hierarchical clustering within an F1 population is used to group samples with similar intensity values, and allele dosages are assigned to clusters based on expected segregation ratios. In the prediction phase, multiple F1 populations and the prediction set are clustered together, and the genotype for each cluster is the mode of the training set samples. A concordance metric, defined as the proportion of training set samples equal to the mode, can be used to eliminate unreliable markers and compare different algorithms. Across three potato families genotyped with an 8K SNP array, ClusterCall scored 5729 markers with at least 0.95 concordance (94.6% of its total), compared to 5325 with the software fitTetra (82.5% of its total). The three families were used to predict genotypes for 5218 SNPs in the SolCAP diversity panel, compared with 3521 SNPs in a previous study in which genotypes were called manually. One of the additional markers produced a significant association for vine maturity near a well-known causal locus on chromosome 5. In conclusion, when multiple F1 populations are available, ClusterCall is an efficient method for accurate, autotetraploid genotype calling that enables the use of SNP data for research and plant breeding.

  9. Soft calls and broadcast calls in the corncrake as adaptations to short and long range communication.

    Science.gov (United States)

    Ręk, Paweł

    2013-10-01

    Because birds' acoustic signals function in antagonistic interactions between males and in female attraction, a majority of vocalisations are loud. In contrast, some birds, additionally produce soft vocalisations in escalated agonistic and sexual contexts. Nevertheless, the relationship between the acoustic parameters of such signals and their function is not clear. Here I investigate the sound transmission degradation properties of soft and broadcast (loud) calls in the corncrake using calls with natural and changed amplitude. I show that, if played at the same amplitude, the maximum limit for communication distance with soft calls was significantly shorter than that of broadcast calls, indicating that frequency structure is important in determining the range of both signals independently of their amplitude. At the same time, the values of excess attenuation were lower for soft calls than for broadcast calls at most distances, which suggests that the short transmission of soft calls is achieved mostly due to their low and narrow frequency ranges, promoting their masking by ambient noise. Finally, contrary to soft calls, changes in the energy of tails of echoes in broadcast calls were associated with the distance of propagation, which might be useful in assessing the distance to senders. I suggest that the acoustic structure of soft vocalisations can be used to limit the range of the signal, which might be helpful in eavesdropping avoidance, whereas broadcast calls are designed for long-range transmission. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Echolocation calls and communication calls are controlled differentially in the brainstem of the bat Phyllostomus discolor

    Directory of Open Access Journals (Sweden)

    Schuller Gerd

    2005-08-01

    Full Text Available Abstract Background Echolocating bats emit vocalizations that can be classified either as echolocation calls or communication calls. Neural control of both types of calls must govern the same pool of motoneurons responsible for vocalizations. Electrical microstimulation in the periaqueductal gray matter (PAG elicits both communication and echolocation calls, whereas stimulation of the paralemniscal area (PLA induces only echolocation calls. In both the PAG and the PLA, the current thresholds for triggering natural vocalizations do not habituate to stimuli and remain low even for long stimulation periods, indicating that these structures have relative direct access to the final common pathway for vocalization. This study intended to clarify whether echolocation calls and communication calls are controlled differentially below the level of the PAG via separate vocal pathways before converging on the motoneurons used in vocalization. Results Both structures were probed simultaneously in a single experimental approach. Two stimulation electrodes were chronically implanted within the PAG in order to elicit either echolocation or communication calls. Blockade of the ipsilateral PLA site with iontophoretically application of the glutamate antagonist kynurenic acid did not impede either echolocation or communication calls elicited from the PAG. However, blockade of the contralateral PLA suppresses PAG-elicited echolocation calls but not communication calls. In both cases the blockade was reversible. Conclusion The neural control of echolocation and communication calls seems to be differentially organized below the level of the PAG. The PLA is an essential functional unit for echolocation call control before the descending pathways share again the final common pathway for vocalization.

  11. Chewing and Attention: A Positive Effect on Sustained Attention

    Directory of Open Access Journals (Sweden)

    Yoshiyuki Hirano

    2015-01-01

    Full Text Available Chewing is crushing food not only to aid swallowing and digestion, but also to help stress relief and regulate cognitive function, especially in attention. It is well known that chewing gum is used for sleepiness prevention during work, learning, and driving, suggesting a link between chewing and sustained attention. We hypothesized that chewing elevates attention and/or alertness, leading to improvements in cognitive performance. We carried out a systematic review of the PubMed database. We inspected the attributes of effects on attention in studies investigating the effects of chewing on attention or alertness conducted with pre-post design in healthy subjects, except elderly. We identified 151 references, 22 of which were included: 14 (64% showed positive attributes of effects on attention, 1 (5% showed negative attributes of effects on attention, 5 (23% showed both positive and negative attributes of effects on attention, and 2 (9% showed no significant attributes of effects on attention. Thus, positive attributes of effects of chewing on attention, especially on sustained attention, were shown in over half of the reports. These effects also appeared with improvement in mood and stress relief and were influenced by time-on-task effect. Further studies are needed, but chewing could be useful for modifying cognitive function.

  12. Wireless world widens nurse call options.

    Science.gov (United States)

    Baillie, Jonathan

    2014-01-01

    With wireless technology now an integral part of all our lives, and miniaturisation of computing power having made even hand-held portable devices such as mobile phones powerful tools in their own right, HEJ editor, Jonathan Baillie, spoke to specialist in wireless nurse call systems, Courtney-Thorne, to discuss some of its key recent product innovations, and see what impact it feels developments such as 'cloud' technology will have on the bringing of more technology into the nurse call sector as 'nurse and carer tools'.

  13. Social Image Captioning: Exploring Visual Attention and User Attention

    Directory of Open Access Journals (Sweden)

    Leiquan Wang

    2018-02-01

    Full Text Available Image captioning with a natural language has been an emerging trend. However, the social image, associated with a set of user-contributed tags, has been rarely investigated for a similar task. The user-contributed tags, which could reflect the user attention, have been neglected in conventional image captioning. Most existing image captioning models cannot be applied directly to social image captioning. In this work, a dual attention model is proposed for social image captioning by combining the visual attention and user attention simultaneously.Visual attention is used to compress a large mount of salient visual information, while user attention is applied to adjust the description of the social images with user-contributed tags. Experiments conducted on the Microsoft (MS COCO dataset demonstrate the superiority of the proposed method of dual attention.

  14. Preparatory attention in visual cortex

    NARCIS (Netherlands)

    Battistoni, E.; Stein, T.; Peelen, M.V.

    2017-01-01

    Top-down attention is the mechanism that allows us to selectively process goal-relevant aspects of a scene while ignoring irrelevant aspects. A large body of research has characterized the effects of attention on neural activity evoked by a visual stimulus. However, attention also includes a

  15. Preparatory attention in visual cortex

    NARCIS (Netherlands)

    Battistoni, E.; Stein, T.; Peelen, M.V.

    Top-down attention is the mechanism that allows us to selectively process goal-relevant aspects of a scene while ignoring irrelevant aspects. A large body of research has characterized the effects of attention on neural activity evoked by a visual stimulus. However, attention also includes a

  16. Connectivity supporting attention in children with attention deficit hyperactivity disorder.

    Science.gov (United States)

    Barber, Anita D; Jacobson, Lisa A; Wexler, Joanna L; Nebel, Mary Beth; Caffo, Brian S; Pekar, James J; Mostofsky, Stewart H

    2015-01-01

    Intra-subject variability (ISV) is the most consistent behavioral deficit in Attention Deficit Hyperactivity Disorder (ADHD). ISV may be associated with networks involved in sustaining task control (cingulo-opercular network: CON) and self-reflective lapses of attention (default mode network: DMN). The current study examined whether connectivity supporting attentional control is atypical in children with ADHD. Group differences in full-brain connection strength and brain-behavior associations with attentional control measures were examined for the late-developing CON and DMN in 50 children with ADHD and 50 typically-developing (TD) controls (ages 8-12 years). Children with ADHD had hyper-connectivity both within the CON and within the DMN. Full-brain behavioral associations were found for a number of between-network connections. Across both groups, more anti-correlation between DMN and occipital cortex supported better attentional control. However, in the TD group, this brain-behavior association was stronger and occurred for a more extensive set of DMN-occipital connections. Differential support for attentional control between the two groups occurred with a number of CON-DMN connections. For all CON-DMN connections identified, increased between-network anti-correlation was associated with better attentional control for the ADHD group, but worse attentional control in the TD group. A number of between-network connections with the medial frontal cortex, in particular, showed this relationship. Follow-up analyses revealed that these associations were specific to attentional control and were not due to individual differences in working memory, IQ, motor control, age, or scan motion. While CON-DMN anti-correlation is associated with improved attention in ADHD, other circuitry supports improved attention in TD children. Greater CON-DMN anti-correlation supported better attentional control in children with ADHD, but worse attentional control in TD children. On the other

  17. Relationship between visuospatial attention and paw preference in dogs.

    Science.gov (United States)

    Siniscalchi, Marcello; d'Ingeo, Serenella; Fornelli, Serena; Quaranta, Angelo

    2016-08-22

    The relationship between visuospatial attention and paw preference was investigated in domestic dogs. Visuospatial attention was evaluated using a food detection task that closely matches the so-called "cancellation" task used in human studies. Paw preference was estimated by quantifying the dog's use of forepaws to hold a puzzle feeder device (namely the "Kong") while eating its content. Results clearly revealed a strong relationship between visuospatial attention bias and motor laterality, with a left-visuospatial bias in the left-pawed group, a right-visuospatial bias in the right-pawed group and with the absence of significant visuospatial attention bias in ambi-pawed subjects. The current findings are the first evidence for the presence of a relationship between motor lateralization and visuospatial attentional mechanisms in a mammal species besides humans.

  18. L2 Teachers' Experience of CALL Technology Education and the Use of Computer Technology in the Classroom: The Case of Franklin County, Ohio

    Science.gov (United States)

    Hong, Kwang Hee

    2009-01-01

    Primary issues concerned with CALL (Computer-Assisted Language Learning) teacher education are twofold: Integration of CALL technology into foreign and second language (L2) teacher education programs and L2 teachers' integration of CALL technology into their classroom. While increased attention has been paid to the former, only a small body of…

  19. Some Call It Stone: Teaching Abstract Sculpture

    Science.gov (United States)

    Asher, Rikki

    2004-01-01

    Abstract visual art is not for everybody. Some people find it threatening, uncomfortable, and often, inaccessible. Understandably, this can result in a lack of attention paid to nonrepresentational works of art in the visual arts curriculum. This article describes an experiential, hands-on, field trip that sought to demystify abstract sculpture,…

  20. Attentional Lapses of Adults with Attention Deficit Hyperactivity Disorder in Tasks of Sustained Attention

    NARCIS (Netherlands)

    Gmehlin, Dennis; Fuermaier, Anselm B.M.; Walther, Stephan; Tucha, Lara; Koerts, Janneke; Lange, Klaus W.; Tucha, Oliver; Weisbrod, Matthias; Aschenbrenner, Steffen

    Adults with attention deficit hyperactivity disorder (ADHD) show attentional dysfunction such as distractibility and mind-wandering, especially in lengthy tasks. However, fundamentals of dysfunction are ambiguous and relationships of neuropsychological test parameters with self-report measures of

  1. The function of migratory bird calls

    DEFF Research Database (Denmark)

    Reichl, Thomas; Andersen, Bent Bach; Larsen, Ole Næsbye

    migration and to stimulate migratory restlessness in conspecifics. We wished to test if conspecific flight calls influence the flight direction of a nocturnal migrant, the European Robin (Erithacus rubecula), i.e. if flight calls help migrants keeping course. Wild caught birds showing migratory restlessness...... the experimental bird could be activated successively to simulate a migrating Robin cruising E-W, W-E, S-N or N-S at a chosen height (mostly about 40 m), at 10 m/s and emitting Robin flight calls of 80 dB(A) at 1 m. The simulated flight of a "ding" sound served as a control. During an experiment the bird was first...... allowed to settle and express migratory restlessness for at least 30 minutes. Secondly, the flight simulation axis (e.g. E-W or N-S) with the largest angle relative to the bird's migration course was chosen and "flights" of simulated calling conspecifics or the "ding" sound along this axis continued...

  2. Relabeling the Medications We Call Antidepressants

    Directory of Open Access Journals (Sweden)

    David Antonuccio

    2012-01-01

    Full Text Available This paper raises the question about whether the data on the medications we call antidepressants justify the label of antidepressant. The authors argue that a true antidepressant should be clearly superior to placebo, should offer a risk/benefit balance that exceeds that of alternative treatments, should not increase suicidality, should not increase anxiety and agitation, should not interfere with sexual functioning, and should not increase depression chronicity. Unfortunately, these medications appear to fall short on all of these dimensions. Many of the “side effects” of these medications have larger effect sizes than the antidepressant effect size. To call these medications antidepressants may make sense from a marketing standpoint but may be misleading from a scientific perspective. Consumers deserve a label that more accurately reflects the data on the largest effects and helps them understand the range of effects from these medications. In other words, it may make just as much sense to call these medications antiaphrodisiacs as antidepressants because the negative effects on libido and sexual functioning are so common. It can be argued that a misleading label may interfere with our commitment to informed consent. Therefore, it may be time to stop calling these medications antidepressants.

  3. Implementing Distributed Algorithms using Remote Procedure Call

    NARCIS (Netherlands)

    Bal, H.E.; van Renesse, R.; Tanenbaum, A.S.

    1987-01-01

    Remote procedure call (RPC) is a simple yet powerful primitiv~ for communication and synchronization between distributed processes. A problem with RPC is that it tends to decrease the amount of parallelism in an application due to its synchronous nature. This paper shows how light-weight processes

  4. Why We Like to Call Ourselves Latinas

    Science.gov (United States)

    Gonzlez, Christina; Gandara, Patricia

    2005-01-01

    This article discusses the complex and subtle reasons why many people of Spanish-speaking ancestry, both Latin Americans and Spaniards, like to call themselves Latinos. Among other things, this word, coined by the Mediterranean countries to resist Anglo dominance in the 19th century, is currently being used by people of Spanish-speaking ancestry…

  5. Glasbury Bridge 1: The Jumper. Close Call.

    Science.gov (United States)

    Journal of Adventure Education and Outdoor Leadership, 1994

    1994-01-01

    Describes an incident in which a group of 10th-grade students in a 1-week outdoor residential program in the Wye Valley (Great Britain) defied program rules, drank alcohol, and had a close call with a near-drowning. Discusses five strategies for dealing with such groups coalesced around a rebellious leader. (SV)

  6. Optimization of Overflow Policies in Call Centers

    DEFF Research Database (Denmark)

    Koole, G.M.; Nielsen, B.F.; Nielsen, T.B.

    2015-01-01

    We examine how overflow policies in a multi-skill call center should be designed to accommodate performance measures that depend on waiting time percentiles such as service level. This is done using a discrete Markovian approximation of the waiting time of the first customers waiting in line...... and customers are treated in a FCFS order....

  7. Computer Assisted Language Learning (CALL) Software: Evaluation ...

    African Journals Online (AJOL)

    Evaluating the nature and extent of the influence of Computer Assisted Language Learning (CALL) on the quality of language learning is highly problematic. This is owing to the number and complexity of interacting variables involved in setting the items for teaching and learning languages. This paper identified and ...

  8. 76 FR 17934 - Infrastructure Protection Data Call

    Science.gov (United States)

    2011-03-31

    ... SECURITY Infrastructure Protection Data Call AGENCY: National Protection and Programs Directorate, DHS... of Infrastructure Protection (IP), will submit the following Information Collection Request to the... infrastructure and key resources (CIKR). At DHS, this responsibility is managed by IP within NPPD. Beginning in...

  9. Bridging CALL & HCI: Input from Participatory Design

    Science.gov (United States)

    Cardenas-Claros, Monica S.; Gruba, Paul A.

    2010-01-01

    Participatory design (PD), or the collaboration between software engineers and end users throughout the design process, may help improve CALL design practices. In this case study, four ESL learners, a software designer, and a language teacher created and evaluated a series of paper prototypes concerning help options in computer-based second…

  10. Authenticity in CALL: Three Domains of "Realness"

    Science.gov (United States)

    Buendgens-Kosten, Judith

    2013-01-01

    This paper discusses the role of authenticity and authenticity claims in computer assisted language learning (CALL). It considers authenticity as the result of a social negotiation process rather than an innate feature of a text, object, person, or activity. From this basis, it argues that authenticity claims play an important role in both second…

  11. Calling, is there anything special about it?

    Directory of Open Access Journals (Sweden)

    Malan Nel

    2016-07-01

    Full Text Available Within the Reformed tradition, ‘calling’ is a core concept. Often, this biblical verse is cited when a pastor is installed or a new candidate is ordained, ‘The one who calls you is faithful and he will do it’ (1 Th 5:24 NIV. It is also confessed within this tradition that all Christians are called to be faithful ministers of the graces of God in whatever profession they may serve. In some Presbyterian congregations, it is a practice to say at the baptism of a child, ‘This is your ordination to ministry’. This article focuses on what is meant by calling when we use it in so many ways and with so many meanings. The first part explores the use of the concept in church history by different scholars and leaders – like in the Reformation. The second part briefly explores the implications and impact of the calling of someone into full-time congregational ministry.

  12. Reflections … they called it 'restructuring'[1

    African Journals Online (AJOL)

    HMPG, and indeed publishing globally) was financial,[4] reflecting tough economic times and declining revenues from advertising. JA found herself accepting so-called 'native' advertising (the practice ... preferring to receive their reading 'lite' on mobile platforms. According to GA, 35% of readers use tablets and phones to ...

  13. Make a 21st century phone call

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Want to avoid roaming charges? Click to call anyone at CERN? How about merging your CERN landline with your existing smartphone? That's all easily done with Lync, CERN's new opt-in service that can take your calls to the next level.   The Lync application on Windows (left) and iPhone (right). Lync unites CERN's traditional telephone service with the digital sphere. "Lync gives you the gift of mobility, by letting you access your CERN landline on the go," explains Pawel Grzywaczewski, service manager of the Lync system. "Once you've registered your CERN telephone with the service, you can run the Lync application and make calls from a range of supported devices. No matter where you are in the world - be it simply out to lunch or off at an international conference - you can make a CERN call as though you were in the office. All you need is an Internet connection!" Following a recent upgrade, CERN's Lync service now has...

  14. Don't Call it Poetry

    African Journals Online (AJOL)

    denise

    Introduction. This paper explores the use of poetic forms of expressive writing in phenomenological research. The first part recapitulates the expressive agenda and its links with phenomenology. The second part of the paper looks at the genesis of a poetic form I used in recent phenomenological writing which I came to call ...

  15. 76 FR 36130 - Call for Candidates

    Science.gov (United States)

    2011-06-21

    ... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Call for Candidates AGENCY: Federal Accounting... candidates. Any applicant who provided the Federal Accounting Standards Advisory Board (FASAB or the Board... to [email protected] ; by U.S. mail or commercial delivery service to: Federal Accounting Standards...

  16. 76 Computer Assisted Language Learning (CALL) Software ...

    African Journals Online (AJOL)

    Ike Odimegwu

    learning material, which promotes self-paced learning. CALL has also been known by several other terms such as technology-enhanced language learning .... navigation rely on the presentation of items according to the estimated level of learners language and cognitive abilities. So, if the learner responds correctly, the ...

  17. When to call a linear system nonnegative

    NARCIS (Netherlands)

    Nieuwenhuis, J.W.

    1998-01-01

    In this paper we will consider discrete time invariant linear systems that allow for an input-state-output representation with a finite dimensional state space, and that have a finite number of inputs and outputs. The basic issue in this paper is when to call these systems nonnegative. An important

  18. Call for Implementation Research Proposals: Health Information ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Chaitali Sinha

    2017-04-10

    Apr 10, 2017 ... Introduction. Canada's International Development Research Centre (IDRC) is pleased to announce a call for implementation research proposals to contribute to national and regional efforts to improve health systems responsiveness in West Africa (WA). Two separate but complementary thematic areas of ...

  19. Call for Applications IDRC Research Awards 2016

    International Development Research Centre (IDRC) Digital Library (Canada)

    Carole Labrie

    2015-08-06

    Call for Applications. IDRC Research Awards 2016. Deadline: August 6, 2015. The award. IDRC offers these awards to graduate-level Canadians, permanent residents of Canada, and citizens of developing countries. Research award recipients will undertake a one-year paid program of research on the topic they have ...

  20. 78 FR 21891 - Rural Call Completion

    Science.gov (United States)

    2013-04-12

    .... Introduction 1. Retail long-distance providers, such as wireless providers, cable companies, interexchange... traffic may not be blocked, choked, reduced, or restricted, we have learned that carriers often do not... called party, including, for example, by voicemail, answering machine, or fax machine. We calculate a...

  1. "The Call of the Wild": Thematic Unit.

    Science.gov (United States)

    Prinsen, Tammy

    This unit intends for students to explore various literary devices such as theme, characterization, and vocabulary while they read Jack London's "The Call of the Wild." While reading this text, students will explore the relationship of these devices in connection to the unit's overall theme: survival. Students will be exposed to history,…

  2. Answering the Call of the Wild.

    Science.gov (United States)

    Dyer, Daniel

    1988-01-01

    Recounts a teacher's experience during his sabbatical leave of visiting the country about which Jack London wrote in "Call of the Wild" and other books. The journey which was initiated to learn more about the author and gather interesting teaching materials for teaching Literature. (NH)

  3. The Dance of Attention: Toward an Aesthetic Dimension of Attention-Deficit.

    Science.gov (United States)

    Levin, Kasper

    2018-03-01

    What role does the aesthetics of bodily movement play in the understanding of attention among children diagnosed with attention-deficit/hyperactivity disorder (ADHD)? This article animates a phenomenological approach to attention and embodiment with a special focus on the relation between aesthetic or expressive bodily movement and behavioral awareness in children diagnosed with ADHD. However, beyond this it is argued that the aesthetic aspect of movement calls for an expansion of the phenomenological perspective. In this context Gilles Deleuze's notion of aesthetics as a "science of the sensible" is activated and discussed in relation to the phenomenological concept of perception. Empirically the article takes point of departure in a qualitative study conducted with a group of children with attention-deficit practicing the Afro-Brazilian marital art, capoeira. Combining ethnographic and phenomenological methods, it is demonstrated that capoeira can be considered a form of aesthetic movement that offers a transition of attention-deficit into a productive force of expression that changes the notions of sensation and movement in ADHD.

  4. Attentional accounting: Voluntary spatial attention increases budget category prioritization.

    Science.gov (United States)

    Mrkva, Kellen; Van Boven, Leaf

    2017-09-01

    Too often, people fail to prioritize the most important activities, life domains, and budget categories. One reason for misplaced priorities, we argue, is that activities and categories people have frequently or recently attended to seem higher priority than other activities and categories. In Experiment 1, participants were cued to direct voluntary spatial attention toward 1 side of a screen while images depicting different budget categories were presented: 1 category on the cued side and 1 on the noncued side of the screen. Participants rated cued budget categories as higher priority than noncued budget categories. Cued attention also increased perceived distinctiveness, and a mediation model was consistent with the hypothesis that distinctiveness mediates the effect of cued attention on prioritization. Experiment 2 orthogonally manipulated 2 components of a spatial cuing manipulation-heightened visual attention and heightened mental attention-to examine how each influences prioritization. Visual attention and mental attention additively increased prioritization. In Experiment 3, attention increased prioritization even when prioritization decisions were incentivized, and even when heightened attention was isolated from primacy and recency. Across experiments, cued categories were prioritized more than noncued categories even though measures were taken to disguise the purpose of the experiments and manipulate attention incidentally (i.e., as a by-product of an unrelated task). (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  5. Assessment of Attention in Preschoolers

    Science.gov (United States)

    Mahone, E.M.; Schneider, H.E.

    2012-01-01

    In the past two decades, there has been an increased interest in the assessment and treatment of preschool children presenting with concerns about attention problems. This article reviews the research and clinical literature involving assessment of attention and related skills in the preschool years. While inattention among preschoolers is common, symptoms alone do not necessarily indicate a disorder, and most often represent a normal variation in typical preschool child development. Thus, accurate identification of “disordered” attention in preschoolers can be challenging, and development of appropriate, norm-referenced tests of attention for preschoolers is also difficult. The current review suggests that comprehensive assessment of attention and related functions in the preschool child should include thorough review of the child’s history, planned observations, and formal psychometric testing. The three primary methods of psychometric assessment that have been used to characterize attentional functioning in preschool children include performance-based tests, structured caregiver interviews, and rating scales (parent, teacher, and clinician). Among performance-based methods for measurement of attention in the preschool years, tests have been developed to assess sustained attention, selective (focused) attention, span of attention (encoding/manipulation), and (top-down) controlled attention—including freedom from distractibility and set shifting. Many of these tests remain experimental in nature, and review of published methods yields relatively few commercially available, nationally normed tests of attention for preschoolers, and an overall dearth of reliability and validity studies on the available measures. PMID:23090646

  6. Intersensory Redundancy Educates Selective Attention in Bobwhite Quail Embryos

    Science.gov (United States)

    Lickliter, Robert; Bahrick, Lorraine E.; Markham, Rebecca G.

    2006-01-01

    We assessed whether exposure to amodal properties in bimodal stimulation (e.g. rhythm, rate, duration) could educate attention to amodal properties in subsequent unimodal stimulation during prenatal development. Bobwhite quail embryos were exposed to an individual bobwhite maternal call under several experimental and control conditions during the…

  7. Exposure to lead and specific attentional problems in schoolchildren.

    NARCIS (Netherlands)

    Minder, B.; Das-Smaal, E.A.; Brand, E.F.J.M.; Orlebeke, J.F.

    1994-01-01

    A pilot study was carried out to investigate the relationship between exposure to lead and attention in children. The participants were 43 boys, 8 to 12 years of age, attending special schools for children with educational and/or learning problems (so called LOM schools). Children with probable

  8. Phenomenology of Joint Attention | Martell | Indo-Pacific Journal of ...

    African Journals Online (AJOL)

    It is one thing for two or more persons to perceive the same object, and it is quite another for two or more persons to perceive the same object together. The latter phenomenon is called joint attention and has recently garnered considerable interest from psychologists. However, contemporary psychological research has not ...

  9. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel

    Energy Technology Data Exchange (ETDEWEB)

    Gui, Zhong-Xiang; Wang, Kai; Zhang, Yi-Sheng [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhu, Bin, E-mail: zhubin26@gmail.com [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2014-10-15

    Highlights: • Cracking failure of the Al–Si coating in hot stamping process was investigated. • Microcracks initiated inside the coating during the austenitization. • Microcrack initiation in the hot deformation correlated to the Fe–Al intermetallics. • Macrocracks extended along the Mode I path led to the coating break into segments. • Macrocracks growth followed Mode II path resulted in the interfacial debonding. - Abstract: This study is focused on the mechanisms of cracks initiation, propagation and interfacial debonding of the Al–Si coating in hot stamping of the pre-coated boron steel. The investigation was performed isothermally at three deformation temperatures (700, 750, 800 °C) at a strain rate of 0.1/s. Cracking and interfacial debonding of the coating were observed with optical and scanning electron microscope, to reveal the damage evolution under applied tensile strains. Microstructures and phase inside the coating before and after austenitization were determined by energy dispersive spectroscopy and X-ray diffraction. The results indicate that austenitization led to micro-cracks and Kirkendall voids initiation inside the Al–Si coating because of thermal loading, and the cracks were arrested by α-Fe diffusion layer. When the coating on substrate system was submitted to the uniaxial tensile test, the surface coating exhibited multiple cracking normal to the tensile direction. The Kirkendall voids seemed to promote the macro-crack growth through the diffusion layer. The macro-cracks followed a Mode I path, leading to the coating deteriorates to cracked segments. The macro-cracks then continued to propagate following a Mode II path that along the diffusion layer/substrate interface because of shear stress transferred from the deformed substrate, resulting in the interfacial debonding of the coating segments. The crack density firstly increased with the increasing tensile strain and then reached saturation. Decreasing deformation

  10. Microbial growth and physiology: a call for better craftsmanship

    Science.gov (United States)

    Egli, Thomas

    2015-01-01

    Virtually every microbiological experiment starts with the cultivation of microbes. Consequently, as originally pointed out by Monod (1949), handling microbial cultures is a fundamental methodology of microbiology and mastering different cultivation techniques should be part of every microbiologist’s craftsmanship. This is particularly important for research in microbial physiology, as the composition and behavior of microbes is strongly dependent on their growth environment. It has been pointed out repeatedly by eminent microbiologists that we should give more attention to the media and culturing conditions. However, this is obviously not adhered to with sufficient rigor as mistakes in basic cultivation principles are frequently found in the published research literature. The most frequent mistakes are the use of inappropriate growth media and little or no control of the specific growth rate, and some examples will be discussed here in detail. Therefore, this is a call for better microbiological craftsmanship when cultivating microbial cultures for physiological experiments. This call is not only addressed to researchers but it is probably even more important for the teaching of our discipline. PMID:25926822

  11. Microbial growth and physiology: a call for better craftsmanship.

    Science.gov (United States)

    Egli, Thomas

    2015-01-01

    Virtually every microbiological experiment starts with the cultivation of microbes. Consequently, as originally pointed out by Monod (1949), handling microbial cultures is a fundamental methodology of microbiology and mastering different cultivation techniques should be part of every microbiologist's craftsmanship. This is particularly important for research in microbial physiology, as the composition and behavior of microbes is strongly dependent on their growth environment. It has been pointed out repeatedly by eminent microbiologists that we should give more attention to the media and culturing conditions. However, this is obviously not adhered to with sufficient rigor as mistakes in basic cultivation principles are frequently found in the published research literature. The most frequent mistakes are the use of inappropriate growth media and little or no control of the specific growth rate, and some examples will be discussed here in detail. Therefore, this is a call for better microbiological craftsmanship when cultivating microbial cultures for physiological experiments. This call is not only addressed to researchers but it is probably even more important for the teaching of our discipline.

  12. Learning-induced changes in attentional allocation during categorization: a sizable catalog of attention change as measured by eye movements.

    Directory of Open Access Journals (Sweden)

    Caitlyn M McColeman

    Full Text Available Learning how to allocate attention properly is essential for success at many categorization tasks. Advances in our understanding of learned attention are stymied by a chicken-and-egg problem: there are no theoretical accounts of learned attention that predict patterns of eye movements, making data collection difficult to justify, and there are not enough datasets to support the development of a rich theory of learned attention. The present work addresses this by reporting five measures relating to the overt allocation of attention across 10 category learning experiments: accuracy, probability of fixating irrelevant information, number of fixations to category features, the amount of change in the allocation of attention (using a new measure called Time Proportion Shift - TIPS, and a measure of the relationship between attention change and erroneous responses. Using these measures, the data suggest that eye-movements are not substantially connected to error in most cases and that aggregate trial-by-trial attention change is generally stable across a number of changing task variables. The data presented here provide a target for computational models that aim to account for changes in overt attentional behaviors across learning.

  13. Hot stamping of an Al-Li alloy: a feasibility study

    Directory of Open Access Journals (Sweden)

    Gao Haoxiang

    2016-01-01

    Full Text Available The feasibility of forming a third generation aluminium-lithium alloy (AA2060 into a complex shaped panel component, was studied by using an advanced forming technology called solution heat treatment, cold die forming and in-die quenching (HFQa process. The main challenges using HFQ technology to form complex shaped AA2060 component was to find out optimum forming parameters, such as forming temperature, forming speed, lubrication condition and blank holding force. In this paper, the optimum forming temperature was mainly concerned. The flow stresses of AA2060 were obtained at different temperatures ranging from 350 to 520 °C at the strain rate of 2 s−1. The suitable temperature to achieve the adequate ductility was found at 470 °C. By forming the AA2060 blanks at the optimum forming temperature, experimental results exhibited the feasibility for forming complex-shaped AA2060 components. The formed components were analysed through strain measurements. The post-form mechanical properties of AA2060 were assessed using hardness and tensile tests.

  14. Attentional blink in children with attention deficit hyperactivity disorder

    OpenAIRE

    Amador, Juan Antonio; Aznar Casanova, José Antonio; Bezerra, Izabela; Torro Alves, Nelson; Moreno Sánchez, Manuel

    2015-01-01

    Objective: To explore the temporal mechanism of attention in children with attention deficit hyperactivity disorder (ADHD) and controls using a rapid serial visual presentation (RSVP) task in which two letters (T1 and T2) were presented in close temporal proximity among distractors (attentional blink [AB]). Method: Thirty children aged between 9 and 13 years (12 with ADHD combined type and 18 controls) took part in the study. Both groups performed two kinds of RSVP task. In the single task, p...

  15. Called to respond: The potential of unveiling hiddens

    Directory of Open Access Journals (Sweden)

    Alison L Black

    2014-12-01

    Full Text Available Interested in exploring how personal stories and aesthetic modes of representing experiences can nudge open academic and educational spaces, this article/collection of particles seeks to document our encounters of being affected and called to respond to things the other has written and represented. As a way of engaging with questions about what research and research data might be and become, our attention has been drawn to stories and images from our lives that we have not shaken off – and to how, as we have opened these to the other, making once private moments public, our hiddens have morphed tenderly into a shared knowing and being. As we have acted on the call we have felt to respond we have found ourselves entering spaces of collaboration, communion, contemplation, and conversation – spaces illuminated by what we have not been able to – and cannot – set aside. Using visual and poetic materials we explore heartfelt and heartbroken aspects of our educational worlds and lives, to be present with each other and our (reemerging personal and professional meanings. We see the shared body (of work, of writing, of image that develops from the taking of brave steps and the risky slipping off of academic masks and language, as a manifestation of the trusted and nurturing spaces that can be generated through collaborative opportunities to gather together. These steps towards unveiling hiddens are producing in us and of us a friendship, fluency, and fluidity as we write new ways of becoming. In turn, we hope the uncovering and revealing of our dialogue in the public gathering of this journal might supports readers’ telling of their own life stories through what calls them to respond.

  16. Calling under pressure: Short-finned pilot whales make social calls during deep foraging dives

    DEFF Research Database (Denmark)

    Jensen, Frants Havmand; Marrero Perez, Jacobo; Johnson, Mark

    2011-01-01

    that the energy content of calls is lower at depths where lungs are collapsed and where the air volume available for sound generation is limited by ambient pressure. Frequency content was unaffected, providing a possible cue for group or species identification of diving whales. Social calls may be important...... to maintain social ties for foraging animals, but may be impacted adversely by vessel noise....

  17. SNP calling, genotype calling, and sample allele frequency estimation from new-generation sequencing data

    DEFF Research Database (Denmark)

    Nielsen, Rasmus; Korneliussen, Thorfinn Sand; Albrechtsen, Anders

    2012-01-01

    is calculated using a dynamic programming algorithm and numerically optimized using analytical derivatives. We then use a bayesian method for estimating the sample allele frequency in a single site, and show how the method can be used for genotype calling and SNP calling. We also show how the method can...

  18. Attentional modulation of binocular rivalry

    Directory of Open Access Journals (Sweden)

    Chris ePaffen

    2011-09-01

    Full Text Available Ever since Wheatstone initiated the scientific study of binocular rivalry, it has been debated whether the phenomenon is under attentional control. In recent years, the issue of attentional modulation of binocular rivalry has seen a revival. Here we review the classical studies as well as recent advances in the study of attentional modulation of binocular rivalry. We show that (1 voluntary control over binocular rivalry is possible, yet limited, (2 both endogenous and exogenous attention influence perceptual dominance during rivalry, (3 diverting attention from rival displays does not arrest perceptual alternations, and that (4 rival targets by themselves can also attract attention. From a theoretical perspective, we suggest that attention affects binocular rivalry by modulating the effective contrast of the images in competition. This contrast enhancing effect of top-down attention is counteracted by a response attenuating effect of neural adaptation at early levels of visual processing, which weakens the response to the dominant image. Moreover, we conclude that although frontal and parietal brain areas involved in both binocular rivalry and visual attention overlap, an adapting reciprocal inhibition arrangement at early visual cortex is sufficient to trigger switches in perceptual dominance independently of a higher-level ‘selection’ mechanisms. Both of these processes are reciprocal and therefore self-balancing, with the consequence that complete attentional control over binocular rivalry can never be realized.

  19. BUSINESS MODELS FOR EXTENDING OF 112 EMERGENCY CALL CENTER CAPABILITIES WITH E-CALL FUNCTION INSERTION

    Directory of Open Access Journals (Sweden)

    Pop Dragos Paul

    2010-12-01

    Full Text Available The present article concerns present status of implementation in Romania and Europe of eCall service and the proposed business models regarding eCall function implementation in Romania. eCall system is used for reliable transmission in case of crush between In Vehicle System and Public Service Answering Point, via the voice channel of cellular and Public Switched Telephone Network (PSTN. eCall service could be initiated automatically or manual the driver. All data presented in this article are part of researches made by authors in the Sectorial Contract Implementation study regarding eCall system, having as partners ITS Romania and Electronic Solution, with the Romanian Ministry of Communication and Information Technology as beneficiary.

  20. Sophie Calle: entre imagens e palavras

    Directory of Open Access Journals (Sweden)

    Annateresa Fabris

    2009-01-01

    Full Text Available A relação de Sophie Calle com dois textos ficcionais, de autoria de Hervé Guibert e Paul Auster, permite discutir um ponto central de sua poética: a atuação como performer, colocada por alguns críticos sob o signo do situacionismo. Como suas performances envolvem uma narrativa, foram analisados seus aspectos fotográficos e verbais, tendo como epicentro Suíte veneziana (1980. Qual o papel da fotografia nas narrativas de Calle, nas quais ela é personagem de si mesma? A fotografia é vestígio de acontecimentos reais e seu aspecto documental corrobora a neutralidade dos relatos escritos. É, ao mesmo tempo, fruto de um gesto performático, o qual, ao designar determinados fatos, converte a realidade em imagem.Sophie Calle's relation to two fictional texts, by Hervé Guibert and Paul Auster, allows us to discuss a central issue in her poetics: the acting as a performer, set by some critics under the sign of Situationism. As her performances comprise a narrative, both their verbal and photographic aspects were analyzed, taking as an epicenter the Venetian suite (1980. What role does photography play in Calle's narratives, in which she is a character of herself? Photography is a trace of real happenings and its documental aspect supports the neutrality of written reports. It is, at the same time, the result of a performative gesture, which, while designating certain facts, converts reality into image.

  1. What is this 'school' called neoclassical economics?

    OpenAIRE

    Tony Lawson

    2013-01-01

    What is this school called neoclassical economics? Does it exist? Should it? Where does the term 'neoclassical economics' come from, and is there any connection between any of the current interpretations of the term and its original meaning? How do we make sense of competing current interpretations? Is there a sustainable formulation? These and related questions are raised and answered in an attempt to bring clarity to ongoing economic discussion and debate, thereby to under-labour for a more...

  2. Back to school: the ultimate pediatric call.

    Science.gov (United States)

    Marciano, Samuel D

    2004-07-01

    EMS agencies will continue to respond to calls that have varying levels of seriousness in the school setting. Although most calls will be routine, the potential for a large-scale incident is ever-present. School districts and EMS agencies have to be proactive in developing a plan for responding to these situations. This proactive attitude is essential in fostering cooperation and communication between the school and EMS. It enables us to achieve the goal of making our schools safer. The process in reaching this goal is ongoing and evolving. As an EMS provider, I am aware of the high anxiety that accompanies a call involving a seriously injured child. If the call involves five, 10 or more severely injured kids, the stress can be unbelievable. A plan of action that has been carefully developed, practiced and critiqued will lessen the anxiety and stress. As a teacher, I want my workplace and my students to be safe. If a situation arises, knowing that a planned response is in place, and knowing what I'm supposed to do, gives me the confidence to deal with the event so I can help my students. Finally, as a parent, it is important that my children are in a safe environment in which to learn. If an emergency response is needed, I want to know a good plan will go into effect. That would assure me that the people responsible for the health and safety of my children have done all they can to make school a safer place.

  3. Lernwerkstatt Englisch: Computer Assisted Language Learning (CALL)

    OpenAIRE

    Finkbeiner, Claudia; Knierim, Markus; Fehling, Sylvia

    2002-01-01

    Neue Technologien und Medien, im Besonderen durch Formen computerunterstützten Lernens, haben in den letzten Jahren im Englischunterricht zunehmend an Bedeutung gewonnen, sei es durch die Nutzung von Sprachlernsoftware oder des Internets mit seinen vielfältigen Möglichkeiten zur zielsprachlichen Kommunikation sowie der Informations- und Materialbeschaffung. Mit der zunehmenden Verbreitung computerunterstützten Fremdsprachenlernens (Computer Assisted Language Learning, CALL) besteht auf Seiten...

  4. OTA call center outsells, outservices big brands

    OpenAIRE

    Kennedy, Doug

    2016-01-01

    In an experiment comparing how call center staff interact with potential guests, employees at one OTA won out over hotel companies. As a hotel industry trainer, I have to admit being biased toward booking directly with hotels or hotel brands versus going through third parties such as online travel agencies. However, in my family and social network, I have encountered plenty of raving fans who are more loyal to their preferred OTA than anyone hotel brand. 23 MARCH 2016 8:39 AM

  5. New organic photo-curable nanoimprint resist ≪mr-NIL210≫ for high volume fabrication applying soft PDMS-based stamps

    OpenAIRE

    Messerschmidt, Martin; Greer, Andrew; Schlachter, Florian; Barnett, Julian; Thesen, Manuel W.; Gadegaard, Nikolaj; Grutzner, Gabi; Schleunitz, Arne

    2017-01-01

    Herein, we report on a newly developed and commercialized organic photo-curable Nanoimprint Lithography (NIL) resist, namely mr-NIL210. Since this new NIL resist follows an innovative design concept and contains solely specific monomers with a characteristic chemistry and molecular design, an extended longevity of applied polydimethyl siloxane (PDMS) stamps is enabled addressing a crucial key metric for industrial high-volume manufacturing processes. Moreover, the mr-NIL210 is characterized b...

  6. Using the fibre structure of paper to determine authenticity of the documents: analysis of transmitted light images of stamps and banknotes.

    Science.gov (United States)

    Takalo, Jouni; Timonen, Jussi; Sampo, Jouni; Rantala, Maaria; Siltanen, Samuli; Lassas, Matti

    2014-11-01

    A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  7. “Computer Assisted Language Learning” (CALL

    Directory of Open Access Journals (Sweden)

    Nazlı Gündüz

    2005-10-01

    Full Text Available This article will provide an overview of computers; an overview of the history of CALL, itspros and cons, the internet, World Wide Web, Multimedia, and research related to the uses of computers in the language classroom. Also, it also aims to provide some background for the beginnerson using the Internet in language classes today. It discusses some of the common types of Internetactivities that are being used today, what the minimum requirements are for using the Internet forlanguage learning, and some easy activities you can adapt for your classes. Some special terminology related to computers will also be used in this paper. For example, computer assisted language learning(CALL refers to the sets of instructions which need to be loaded into the computer for it to be able to work in the language classroom. It should be borne in mind that CALL does not refer to the use of acomputer by a teacher to type out a worksheet or a class list or preparing his/her own teaching alone.Hardware refers to any computer equipment used, including the computer itself, the keyboard, screen (or the monitor, the disc-drive, and the printer. Software (computer programs refers to the sets of instructions which need to be loaded into the computer for it to be able to work.

  8. Voluntary attention enhances contrast appearance.

    Science.gov (United States)

    Liu, Taosheng; Abrams, Jared; Carrasco, Marisa

    2009-03-01

    Voluntary (endogenous, sustained) covert spatial attention selects relevant sensory information for prioritized processing. The behavioral and neural consequences of such selection have been extensively documented, but its phenomenology has received little empirical investigation. We asked whether voluntary attention affects the subjective appearance of contrast--a fundamental dimension of visual perception. We used a demanding rapid serial visual presentation (RSVP) task to direct endogenous attention to a given location and measured perceived contrast at the attended and unattended locations. Attention increased perceived contrast of suprathreshold stimuli and also improved performance on a concurrent orientation discrimination task at the cued location. We ruled out response bias as an alternative account of the pattern of results. Thus, this study establishes that voluntary attention enhances perceived contrast. This phenomenological consequence links behavioral and neurophysiological studies on the effects of attention.

  9. Selective attention within the foveola.

    Science.gov (United States)

    Poletti, Martina; Rucci, Michele; Carrasco, Marisa

    2017-10-01

    Efficient control of attentional resources and high-acuity vision are both fundamental for survival. Shifts in visual attention are known to covertly enhance processing at locations away from the center of gaze, where visual resolution is low. It is unknown, however, whether selective spatial attention operates where the observer is already looking-that is, within the high-acuity foveola, the small yet disproportionally important rod-free region of the retina. Using new methods for precisely controlling retinal stimulation, here we show that covert attention flexibly improves and speeds up both detection and discrimination at loci only a fraction of a degree apart within the foveola. These findings reveal a surprisingly precise control of attention and its involvement in fine spatial vision. They show that the commonly studied covert shifts of attention away from the fovea are the expression of a global mechanism that exerts its action across the entire visual field.

  10. Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation

    Directory of Open Access Journals (Sweden)

    Chuan Wang

    2013-01-01

    Full Text Available In order to improve the efficiency of stainless steel stamping multistage pump, quadratic regression orthogonal test, hydraulic design, and computational fluid dynamics (CFD are used to analyze the effect of pump geometric parameters. Sixteen impellers are designed based on the quadratic regression orthogonal test, which have three factors including impeller outlet slope, impeller blade outlet stagger angle, and impeller blade outlet width. Through quadratic regression equation, the function relationship between efficiency values and three factors is established. The optimal combination of geometric parameters is found through the analysis of the regression equation. To further study the influence of blade thickness on the performance of multistage pump, numerical simulations of multistage pump with different blade thicknesses are carried out. The influence law of blade thickness on pump performance is built from the external characteristics and internal flow field. In conclusion, with the increase of blade thickness, the best efficiency point of the pump shifts to the small flow rate direction, and the vortex regions inside the pump at rated flow gradually increase, which is the main reason that pump efficiency decreases along with the increase of the blade thickness at rated flow.

  11. ‘Postage-stamp PIV’: small velocity fields at 400 kHz for turbulence spectra measurements

    Science.gov (United States)

    Beresh, Steven J.; Henfling, John F.; Spillers, Russell W.; Spitzer, Seth M.

    2018-03-01

    Time-resolved particle image velocimetry recently has been demonstrated in high-speed flows using a pulse-burst laser at repetition rates reaching 50 kHz. Turbulent behavior can be measured at still higher frequencies if the field of view is greatly reduced and lower laser pulse energy is accepted. Current technology allows image acquisition at 400 kHz for sequences exceeding 4000 frames but for an array of only 128  ×  120 pixels, giving the moniker of ‘postage-stamp PIV’. The technique has been tested far downstream of a supersonic jet exhausting into a transonic crossflow. Two-component measurements appear valid until 120 kHz, at which point a noise floor emerges whose magnitude is dependent on the reduction of peak locking. Stereoscopic measurement offers three-component data for turbulent kinetic energy spectra, but exhibits a reduced signal bandwidth and higher noise in the out-of-plane component due to the oblique camera images. The resulting spectra reveal two regions exhibiting power-law dependence describing the turbulent decay. The frequency response of the present measurement configuration exceeds nearly all previous velocimetry measurements in high speed flow.

  12. Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

    Directory of Open Access Journals (Sweden)

    Yuxiong Ji

    2017-01-01

    Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

  13. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    Directory of Open Access Journals (Sweden)

    Dong Y.

    2015-01-01

    Full Text Available In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tribological behaviour of aluminium differed great from that of steel regardless of the counterpart material. Highly reactive aluminium had a strong tendency to solder with tool surfaces during dry sliding. However, the lubricity of gray cast irons can be significantly improved by Ni-BN and DLC coatings. The coefficient of friction reduced from about 0.5 for untreated cast irons to about 0.2 sliding against aluminium. Duplex treatment combining plasma nitrocarburising with low-friction coatings showed superior durability than both DLC and Ni-BN coatings.

  14. ABC di corpi: alcuni alfabeti figurati del XVI secolo del Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna

    Directory of Open Access Journals (Sweden)

    Valeria Butera

    2013-10-01

    Full Text Available Fra le diverse tipologie di motivi ornamentali, gli alfabeti figurati costituiscono un vero e proprio genere a se stante, che attinge al repertorio iconografico del proprio tempo e lo riflette in composizioni dotate di grande fascino e originalità. Per la quantità, la qualità e l’eterogeneità degli esemplari custoditi, il Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna costituisce un caso più unico che raro in Italia, vantando alfabeti figurati che abbracciano ampi confini geografici e cronologici, spaziando dal tardo gotico al XIX secolo. Dopo una breve introduzione sulle vicende collezionistiche di un nucleo grafico così insolito e particolare, l’articolo si concentra su alcuni esemplari di alfabeti figurati del Cinquecento di area transalpina. Partendo dall’alfabeto dei bambini di Hans Weiditz (1521, costruito rispettando le più rigorose regole geometriche, codificate nei coevi trattati rinascimentali, ma anche riflesso del rinato gusto per i fregi all’antica con putti, si passa agli alfabeti di Peter Flötner (1534 e di Jost Amman (1567, dove le lettere sono integralmente costituite da corpi umani, forzati in complicate posture, talvolta persino licenziose. Questi esemplari rappresentano degli interessanti esperimenti calligrafici, dove l’uomo diviene concretamente l’unità di misura dei caratteri dell’alfabeto.

  15. How Attention Affects Spatial Resolution

    OpenAIRE

    Carrasco, Marisa; Barbot, Antoine

    2014-01-01

    We summarize and discuss a series of psychophysical studies on the effects of spatial covert attention on spatial resolution, our ability to discriminate fine patterns. Heightened resolution is beneficial in most, but not all, visual tasks. We show how endogenous attention (voluntary, goal driven) and exogenous attention (involuntary, stimulus driven) affect performance on a variety of tasks mediated by spatial resolution, such as visual search, crowding, acuity, and texture segmentation. Exo...

  16. Attention in a bayesian framework

    DEFF Research Database (Denmark)

    Whiteley, Louise Emma; Sahani, Maneesh

    2012-01-01

    , and include both selective phenomena, where attention is invoked by cues that point to particular stimuli, and integrative phenomena, where attention is invoked dynamically by endogenous processing. However, most previous Bayesian accounts of attention have focused on describing relatively simple experimental...... settings, where cues shape expectations about a small number of upcoming stimuli and thus convey "prior" information about clearly defined objects. While operationally consistent with the experiments it seeks to describe, this view of attention as prior seems to miss many essential elements of both its...

  17. Attentional networks in developmental dyscalculia

    Directory of Open Access Journals (Sweden)

    Henik Avishai

    2010-01-01

    Full Text Available Abstract Background Very little is known about attention deficits in developmental dyscalculia, hence, this study was designed to provide the missing information. We examined attention abilities of participants suffering from developmental dyscalculia using the attention networks test - interactions. This test was designed to examine three different attention networks--executive function, orienting and alerting--and the interactions between them. Methods Fourteen university students that were diagnosed as suffering from developmental dyscalculia--intelligence and reading abilities in the normal range and no indication of attention-deficit hyperactivity disorder--and 14 matched controls were tested using the attention networks test - interactions. All participants were given preliminary tests to measure mathematical abilities, reading, attention and intelligence. Results The results revealed deficits in the alerting network--a larger alerting effect--and in the executive function networks--a larger congruity effect in developmental dyscalculia participants. The interaction between the alerting and executive function networks was also modulated by group. In addition, developmental dyscalculia participants were slower to respond in the non-cued conditions. Conclusions These results imply specific attentional deficits in pure developmental dyscalculia. Namely, those with developmental dyscalculia seem to be deficient in the executive function and alertness networks. They suffer from difficulty in recruiting attention, in addition to the deficits in numerical processing.

  18. Preparatory attention in visual cortex.

    Science.gov (United States)

    Battistoni, Elisa; Stein, Timo; Peelen, Marius V

    2017-05-01

    Top-down attention is the mechanism that allows us to selectively process goal-relevant aspects of a scene while ignoring irrelevant aspects. A large body of research has characterized the effects of attention on neural activity evoked by a visual stimulus. However, attention also includes a preparatory phase before stimulus onset in which the attended dimension is internally represented. Here, we review neurophysiological, functional magnetic resonance imaging, magnetoencephalography, electroencephalography, and transcranial magnetic stimulation (TMS) studies investigating the neural basis of preparatory attention, both when attention is directed to a location in space and when it is directed to nonspatial stimulus attributes (content-based attention) ranging from low-level features to object categories. Results show that both spatial and content-based attention lead to increased baseline activity in neural populations that selectively code for the attended attribute. TMS studies provide evidence that this preparatory activity is causally related to subsequent attentional selection and behavioral performance. Attention thus acts by preactivating selective neurons in the visual cortex before stimulus onset. This appears to be a general mechanism that can operate on multiple levels of representation. We discuss the functional relevance of this mechanism, its limitations, and its relation to working memory, imagery, and expectation. We conclude by outlining open questions and future directions. © 2017 New York Academy of Sciences.

  19. Difficulty of Discrimination Modulates Attentional Capture by Regulating Attentional Focus

    Science.gov (United States)

    Sawaki, Risa; Katayama, Jun'ichi

    2009-01-01

    Attentional capture for distractors is enhanced by increasing the difficulty of discrimination between the standard and the target in the three-stimulus oddball paradigm. In this study, we investigated the cognitive mechanism of this modulation of attentional capture. Event-related brain potentials were recorded from participants while they…

  20. Multicomponent attention deficits in attention deficit hyperactivity disorder.

    Science.gov (United States)

    Kiliç, Birim Günay; Sener, Sahnur; Koçkar, Aylin Ilden; Karakaş, Sirel

    2007-04-01

    The aim of this study was to examine the specific aspects of attention, such as selective attention, sustained attention, and short-term memory in children with attention deficit hyperactivity disorder, combined subtype (ADHD-C). A total of 40 children with a diagnosis of ADHD from the 4th edition of the Diagnostic and Statistical Manual, aged 6-11 years old were compared with 40 controls matched for age and gender on a battery of tests. Short-term memory span and attention was measured by Visual Aural Digit Span Test-Revised. Stroop test and the Turkish version of Cancellation Test were used to assess selective and sustained attention, respectively. In order to check for factor structure in two groups on the test scores, principal component analysis was conducted for both groups separately. Relative to the comparison children, children with ADHD showed significant deficits on tests that are related to different aspects of attention. The results are consistent with the theories explaining the biological basis of ADHD by scattered attention networks in the brain, which have reciprocal dynamic interactions. Further comparative studies are needed to elucidate whether the cognitive processes that are known to be assessed by these tests are specific to ADHD.

  1. Provocative Mathematics Questions: Drawing Attention to a Lack of Attention

    Science.gov (United States)

    Klymchuk, Sergiy

    2015-01-01

    The article investigates the role of attention in the reflective thinking of school mathematics teachers. It analyses teachers' ability to pay attention to detail and "use" their mathematical knowledge. The vast majority of teachers can be expected to have an excellent knowledge of mathematical techniques. The question examined here is…

  2. Disorders of attention: a frontier in neuropsychology.

    Science.gov (United States)

    Geschwind, N

    1982-06-25

    There is an extensive behavioural neurological literature on so-called unilateral attentional disorders, but a striking paucity of papers on global disorders of attention, i.e. confusional states. However, confusional states are distinctive because: (1) they are the most common disturbance of the higher functions in clinical practice, by orders of magnitude; (2)they are the only disturbance of the higher functions from which all normal subjects have suffered; (3) they have characteristic clinical manifestations; (4) they are frequently misdiagnosed as progressive dementias, aphasia, memory disorders, and psychoses; (5) they are the only disturbance of the higher functions that commonly cause patients to produce statement that appear to be extremely witty; (6) they can be readily studied experimentally; (7) they are the most common cause of unconcern with or denial of illness. There are almost certainly several different forms of confusional state depending on the aetiology, the rate of development, the age, and the anatomical systems involved, but little classification has yet been carried on. Confusional states are most simply defined as disorders in which there is a loss of the normal coherence of thought or action. Among the striking clinical features are: (1) failure to pay attention, excessive distractibility, or failure to shift attention; (2) paramnesias, i.e. distortions of memory; (3) reduplicative phenomena, 'wild' paraphasias with 'propagation' of error, alterations of mood in many different directions; (4) isolated or predominant disturbance of writing (the most common cause of pur agraphia); (5) unconcern with or denial of illness; (6) apparently playful behaviour. While confusional states are usually attributed to 'global involvement of the brain' as a result of metabolic or toxic disorder, there are in fact many cases produced by focal infarctions inthe right hemisphere, which, in the experience of my department, is one of the commonest effects of

  3. ”We Call Ourselves Marginalized”

    DEFF Research Database (Denmark)

    Jordt Jørgensen, Nanna

    2013-01-01

    of the people we refer to as marginalized. In this paper I discuss how young secondary school graduates from a pastoralist community in Kenya use and negotiate indigeneity, marginal identity, and experiences of marginalization in social navigations aimed at broadening their current and future opportunities. I...... argue that researchers not only need to pay attention to how certain voices are marginalized in environmental education research and practice, but also to how learners as agents respond to, use and negotiate the marginalization of their perspectives....

  4. Calling patterns in human communication dynamics.

    Science.gov (United States)

    Jiang, Zhi-Qiang; Xie, Wen-Jie; Li, Ming-Xia; Podobnik, Boris; Zhou, Wei-Xing; Stanley, H Eugene

    2013-01-29

    Modern technologies not only provide a variety of communication modes (e.g., texting, cell phone conversation, and online instant messaging), but also detailed electronic traces of these communications between individuals. These electronic traces indicate that the interactions occur in temporal bursts. Here, we study intercall duration of communications of the 100,000 most active cell phone users of a Chinese mobile phone operator. We confirm that the intercall durations follow a power-law distribution with an exponential cutoff at the population level but find differences when focusing on individual users. We apply statistical tests at the individual level and find that the intercall durations follow a power-law distribution for only 3,460 individuals (3.46%). The intercall durations for the majority (73.34%) follow a Weibull distribution. We quantify individual users using three measures: out-degree, percentage of outgoing calls, and communication diversity. We find that the cell phone users with a power-law duration distribution fall into three anomalous clusters: robot-based callers, telecom fraud, and telephone sales. This information is of interest to both academics and practitioners, mobile telecom operators in particular. In contrast, the individual users with a Weibull duration distribution form the fourth cluster of ordinary cell phone users. We also discover more information about the calling patterns of these four clusters (e.g., the probability that a user will call the c(r)-th most contact and the probability distribution of burst sizes). Our findings may enable a more detailed analysis of the huge body of data contained in the logs of massive users.

  5. An investigation into the suitability of some etching reagents to restoring obliterated stamped numbers on cast iron engine blocks of cars.

    Science.gov (United States)

    Abdul Wahab, Mohd Farizon; Mohamad Ghani, Nurul Izwani; Kuppuswamy, R

    2012-11-30

    Most of the automotive companies use cast iron for their engine blocks. Restoration of obliterated number on these iron surfaces by chemical etching is known to be quite difficult. Heating of the obliterated surface using oxyacetylene flame is an alternative recovery treatment suggested in literature and used in practice. However chemical etching has been established to be the most sensitive technique for detection of metal deformation present under stamped serial numbers. Hence, the current work investigated the suitability of some common etchants on cast iron surfaces with a view to determining the most suitable one for revealing the obliterated marks. The reagents tested were mostly copper containing Fry's reagent and its modifications. Two cast iron engine blocks (3.29%C and 3.1%C) of two cars--a Proton Saga and a Toyota--were utilized for the experiments. The engine blocks were cut into several small plates and each plate was stamped with some numerical characters at 8 kN load using Instron Table Mounted Universal Testing Machine. The depth of stamping impression varied between 0.2 mm and 0.3 mm. The stamped number was completely ground off manually using a metal file. The grounded surface was then polished smooth using emery papers and etched with a few selected reagents mostly by swabbing. Experimental results showed that a modified Fry's composition consisting of 4 5g CuCl(2), 100 mL HCl, and 180 mL H(2)O restored the number with better contrast at a reasonably shorter time. The above reagent is a slightly modified form of one of the Fry's original compositions--45 g CuCl(2), 180 mL HCl, and 100 mL H(2)O. Quite importantly the proposed reagent restored the original stamped numbers of both Proton and Toyota cars and also a Mitsubishi car that had been obliterated. The most widely used Fry's composition (90 g CuCl(2), 120 mL HCl and 100 mL H(2)O), although recovered the obliterated number, did not cause the desired contrast. Copyright © 2012 Elsevier Ireland

  6. Call center. Centrados en el cliente

    OpenAIRE

    Leal-Alonso-de-Castañeda, José Enrique

    2003-01-01

    La empresa actual ha de estar preparada para responder al Cliente tal y como éste espera, porque no se busca un cliente puntual, sino un cliente fiel. La globalización de la economía y del acceso a los mercados exige que la empresa sea capaz de atraer al cliente no sólo con un servicio de calidad, sino además con una atención de calidad. La implantación de un Call Center (Centro de Atención al Cliente, Centro de Atención de Llamadas) constituye por todo ello una estrategia de negocio qu...

  7. Angel De la Calle, Tina Modotti

    OpenAIRE

    Genevée, Frédérick

    2014-01-01

    La bande dessinée au service de l’histoire. Certains parleront plus volontiers de roman graphique. Angel de la Calle livre une œuvre originale et complexe sur la vie de Tina Modotti (1896-1942). Femme amoureuse, photographe, militante communiste kominternienne, Tina Modotti ne cesse de fasciner notre imaginaire. Italie, États-Unis, Mexique, URSS, Espagne…, elle fut de tous les pays et du monde. Elle croisa Diego Rivera, Vladimir Maïakovski, John Dos Passos, Frida Kahlo, Pablo Neruda… Comment ...

  8. Call for another special issue / book

    Science.gov (United States)

    Bostenaru Dan, M.

    2009-04-01

    We would like to continue the series of special issue or maybe edit a book on this topic. To complete the formerly edited special issues we would like to link natural hazards research to cultural heritage research. We see a way of doing this connected to "integrated conservation", which sees the involvment of urban planning in conservation, as well as the (urban) sociology, the integration of the user, the participatism. We further call for investigation of GIS applications for the investigation of natural hazards' impact in this field. We are open for further ideas and wait for you at the Splinter meeting.

  9. Caffeine Modulates Attention Network Function

    Science.gov (United States)

    Brunye, Tad T.; Mahoney, Caroline R.; Lieberman, Harris R.; Taylor, Holly A.

    2010-01-01

    The present work investigated the effects of caffeine (0 mg, 100 mg, 200 mg, 400 mg) on a flanker task designed to test Posner's three visual attention network functions: alerting, orienting, and executive control [Posner, M. I. (2004). "Cognitive neuroscience of attention". New York, NY: Guilford Press]. In a placebo-controlled, double-blind…

  10. Value-driven attentional capture.

    Science.gov (United States)

    Anderson, Brian A; Laurent, Patryk A; Yantis, Steven

    2011-06-21

    Attention selects which aspects of sensory input are brought to awareness. To promote survival and well-being, attention prioritizes stimuli both voluntarily, according to context-specific goals (e.g., searching for car keys), and involuntarily, through attentional capture driven by physical salience (e.g., looking toward a sudden noise). Valuable stimuli strongly modulate voluntary attention allocation, but there is little evidence that high-value but contextually irrelevant stimuli capture attention as a consequence of reward learning. Here we show that visual search for a salient target is slowed by the presence of an inconspicuous, task-irrelevant item that was previously associated with monetary reward during a brief training session. Thus, arbitrary and otherwise neutral stimuli imbued with value via associative learning capture attention powerfully and persistently during extinction, independently of goals and salience. Vulnerability to such value-driven attentional capture covaries across individuals with working memory capacity and trait impulsivity. This unique form of attentional capture may provide a useful model for investigating failures of cognitive control in clinical syndromes in which value assigned to stimuli conflicts with behavioral goals (e.g., addiction, obesity).

  11. Visuospatial selective attention in chickens.

    Science.gov (United States)

    Sridharan, Devarajan; Ramamurthy, Deepa L; Schwarz, Jason S; Knudsen, Eric I

    2014-05-13

    Voluntary control of attention promotes intelligent, adaptive behaviors by enabling the selective processing of information that is most relevant for making decisions. Despite extensive research on attention in primates, the capacity for selective attention in nonprimate species has never been quantified. Here we demonstrate selective attention in chickens by applying protocols that have been used to characterize visual spatial attention in primates. Chickens were trained to localize and report the vertical position of a target in the presence of task-relevant distracters. A spatial cue, the location of which varied across individual trials, indicated the horizontal, but not vertical, position of the upcoming target. Spatial cueing improved localization performance: accuracy (d') increased and reaction times decreased in a space-specific manner. Distracters severely impaired perceptual performance, and this impairment was greatly reduced by spatial cueing. Signal detection analysis with an "indecision" model demonstrated that spatial cueing significantly increased choice certainty in localizing targets. By contrast, error-aversion certainty (certainty of not making an error) remained essentially constant across cueing protocols, target contrasts, and individuals. The results show that chickens shift spatial attention rapidly and dynamically, following principles of stimulus selection that closely parallel those documented in primates. The findings suggest that the mechanisms that control attention have been conserved through evolution, and establish chickens--a highly visual species that is easily trained and amenable to cutting-edge experimental technologies--as an attractive model for linking behavior to neural mechanisms of selective attention.

  12. What Attracts Decision Makers' Attention?

    DEFF Research Database (Denmark)

    Bentzen, Eric; Christiansen, John K.; Varnes, Claus J.

    2011-01-01

    /methodology/approach – The present analysis draws on insights from previous research into decision making in product and portfolio management and studies on organizational decision making. The authors frame why the attention of decision makers is so critical in complex situations. Data for this study were collected through direct......Purpose – Managers' attention is a scarce resource in complex innovation settings. Prior research on the factors to which managers pay attention is mostly based on surveys. The present study aims to address the need for knowledge about the behavior of decision makers based on observations from...... portfolio meetings. The study seeks to investigate how managers allocate their attention and the role of different factors for their attention. Observations also make it possible to compare prior research and expectations with the actual observed behavior of decision makers. Design...

  13. Combining segmentation and attention: a new foveal attention model

    Directory of Open Access Journals (Sweden)

    Rebeca eMarfil

    2014-08-01

    Full Text Available Artificial vision systems cannot process all the information that they receive from the world in real time because it is highly expensive and inefficient in terms of computational cost. Inspired by biological perception systems, articial attention models pursuit to select only the relevant part of the scene. Besides, it is well established that the units of attention on human vision are not merely spatial but closely related to perceptual objects (proto-objects. This implies a strong bidirectional relationship between segmentation and attention processes. Therefore, while the segmentation process is the responsible to extract the proto-objects from the scene, attention can guide segmentation, arising the concept of foveal attention. When the focus of attention is deployed from one visual unit to another, the rest of the scene is perceived but at a lower resolution that the focused object. The result is a multi-resolution visual perception in which the fovea, a dimple on the central retina, provides the highest resolution vision. In this paper, a bottom-up foveal attention model is presented. In this model the input image is a foveal image represented using a Cartesian Foveal Geometry (CFG, which encodes the field of view of the sensor as a fovea (placed in the focus of attention surrounded by a set of concentric rings with decreasing resolution. Then multirresolution perceptual segmentation is performed by building a foveal polygon using the Bounded Irregular Pyramid (BIP. Bottom-up attention is enclosed in the same structure, allowing to set the fovea over the most salient image proto-object. Saliency is computed as a linear combination of multiple low level features such us colour and intensity contrast, symmetry, orientation and roundness. Obtained results from natural images show that the performance of the combination of hierarchical foveal segmentation and saliency estimation is good in terms of accuracy and speed.

  14. Brain activity associated with selective attention, divided attention and distraction.

    Science.gov (United States)

    Salo, Emma; Salmela, Viljami; Salmi, Juha; Numminen, Jussi; Alho, Kimmo

    2017-06-01

    Top-down controlled selective or divided attention to sounds and visual objects, as well as bottom-up triggered attention to auditory and visual distractors, has been widely investigated. However, no study has systematically compared brain activations related to all these types of attention. To this end, we used functional magnetic resonance imaging (fMRI) to measure brain activity in participants performing a tone pitch or a foveal grating orientation discrimination task, or both, distracted by novel sounds not sharing frequencies with the tones or by extrafoveal visual textures. To force focusing of attention to tones or gratings, or both, task difficulty was kept constantly high with an adaptive staircase method. A whole brain analysis of variance (ANOVA) revealed fronto-parietal attention networks for both selective auditory and visual attention. A subsequent conjunction analysis indicated partial overlaps of these networks. However, like some previous studies, the present results also suggest segregation of prefrontal areas involved in the control of auditory and visual attention. The ANOVA also suggested, and another conjunction analysis confirmed, an additional activity enhancement in the left middle frontal gyrus related to divided attention supporting the role of this area in top-down integration of dual task performance. Distractors expectedly disrupted task performance. However, contrary to our expectations, activations specifically related to the distractors were found only in the auditory and visual cortices. This suggests gating of the distractors from further processing perhaps due to strictly focused attention in the current demanding discrimination tasks. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Effects of noise levels and call types on the source levels of killer whale calls.

    Science.gov (United States)

    Holt, Marla M; Noren, Dawn P; Emmons, Candice K

    2011-11-01

    Accurate parameter estimates relevant to the vocal behavior of marine mammals are needed to assess potential effects of anthropogenic sound exposure including how masking noise reduces the active space of sounds used for communication. Information about how these animals modify their vocal behavior in response to noise exposure is also needed for such assessment. Prior studies have reported variations in the source levels of killer whale sounds, and a more recent study reported that killer whales compensate for vessel masking noise by increasing their call amplitude. The objectives of the current study were to investigate the source levels of a variety of call types in southern resident killer whales while also considering background noise level as a likely factor related to call source level variability. The source levels of 763 discrete calls along with corresponding background noise were measured over three summer field seasons in the waters surrounding the San Juan Islands, WA. Both noise level and call type were significant factors on call source levels (1-40 kHz band, range of 135.0-175.7 dB(rms) re 1 [micro sign]Pa at 1 m). These factors should be considered in models that predict how anthropogenic masking noise reduces vocal communication space in marine mammals.

  16. Attentional Lapses of Adults with Attention Deficit Hyperactivity Disorder in Tasks of Sustained Attention.

    Science.gov (United States)

    Gmehlin, Dennis; Fuermaier, Anselm B M; Walther, Stephan; Tucha, Lara; Koerts, Janneke; Lange, Klaus W; Tucha, Oliver; Weisbrod, Matthias; Aschenbrenner, Steffen

    2016-06-01

    Adults with attention deficit hyperactivity disorder (ADHD) show attentional dysfunction such as distractibility and mind-wandering, especially in lengthy tasks. However, fundamentals of dysfunction are ambiguous and relationships of neuropsychological test parameters with self-report measures of ADHD symptoms are marginal. We hypothesize that basic deficits in sustaining attention explain more complex attentional dysfunction in persons with ADHD and relate to ADHD symptoms. Attentional function was analyzed by computing ex-Gaussian parameters for 3 time Blocks in a 20 min test of sustained alertness. Changes in performance across these blocks were analyzed by comparing adult persons with ADHD (n = 24) with healthy matched controls (n = 24) and correlated with neuropsychological measures of selective and divided attention as well as self-report measures of ADHD symptoms. We found a significantly steeper increase in the number of slow responses (ex-Gaussian parameter τ) in persons with ADHD with time on task in basic sustained alertness. They also performed significantly worse in tasks of sustained selective and divided attention. However, after controlling for an increase in τ during the alertness task, significant differences between groups disappeared for divided and partly selective attention. Increases in τ in the sustained alertness task correlated significantly with self-report measures of ADHD symptoms. Our results provide evidence that very basic deficits in sustaining attention in adults with ADHD are related to infrequent slow responses (=attentional lapses), with changes over time being relevant for more complex attentional function and experienced ADHD symptoms in everyday life. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. Field Crickets Compensate for Unattractive Static Long-Distance Call Components by Increasing Dynamic Signalling Effort.

    Science.gov (United States)

    McAuley, Emily M; Bertram, Susan M

    2016-01-01

    The evolution of multiple sexual signals presents a dilemma since individuals selecting a mate should pay attention to the most honest signal and ignore the rest; however, multiple signals may evolve if, together, they provide more information to the receiver than either one would alone. Static and dynamic signals, for instance, can act as multiple messages, providing information on different aspects of signaller quality that reflect condition at different time scales. While the nature of static signals makes them difficult or impossible for individuals to augment, dynamic signals are much more susceptible to temporary fluctuations in effort. We investigated whether male Texas field crickets, Gryllus texensis, that produce unattractive static signals compensate by dynamically increasing their calling effort. Our findings lend partial support to the compensation hypothesis, as males that called at unattractive carrier frequencies (a static trait) spent more time calling each night (a dynamic trait). Interestingly, this finding was most pronounced in males that called with attractive pulse characteristics (static traits) but did not occur in males that called with unattractive pulse characteristics. Males that signalled with unattractive pulse characteristics (duration and pause) spent less time calling through the night. Our correlative findings on wild caught males suggest that only males that signal with attractive pulse characteristics may be able to afford to pay the costs of both trait exaggeration and increased calling effort to compensate for poor carrier frequencies.

  18. NUESTRA PORTADA. Jugar en la calle

    Directory of Open Access Journals (Sweden)

    Ramon Balius i Juli

    2008-06-01

    Full Text Available Esta vez Nuestra Portada tiene un carácter excepcional. La ocupan dos obras del que fue el “ninotaire” (dibujante de humor inteligente más importante de nuestro país: Francesc Vila i Rufas, conocido por todos como Cesc (1927–2006. Ambos dibujos destacan por sus inconfundibles características de sencillez y, a la vez, de grandeza argumental, que nos han movido a titular este comentario como “Jugar en la calle”. Comenzaré recordando mi precaria experiencia de infancia y primera juventud en esta actividad de índole “suburbana”. Son muchas las personas de mi edad que en algún momento de sus primeros años han jugado en la calle. Recuerdo que la primera vez que lo hice fue hacia 1938, en Sant Boi de Llobregat (denominado entonces Vilaboi, jugando al fútbol. Pasé unos meses en este pueblo huyendo de las bombas que caían sobre Barcelona. También por aquel tiempo, o quizá uno o dos años después, tuve el deseo, que no he podido satisfacer, de deslizarme sobre unos artefactos de madera con ruedas de cojinetes de bolas por la calle de Enric Granados, donde vivía (los construían los chicos del barrio, en formas rudimentarias, que hoy recordarían a los patinetes o los “skateboards”. Durante el bachillerato, al salir de la Escuela Pia de Balmes esquina con Travesera de Gracia, algunas veces había jugado también a fútbol en la calle Tuset, que por aquellos años no estaba bien urbanizada y tenía unas aceras amplísimas sin asfaltar. En los primeros cursos de la carrera de Medicina, participé en unos continuos e inacabables partidos de fútbol que, desde primera hora de la mañana y hasta el mediodía, se organizaban diariamente en el patio claustrado de la Facultad. Generalmente jugábamos entre clase y clase, aunque existía un núcleo de jugadores entusiastas que no entraban en las aulas en ningún momento. Esta competición se clausuró al cabo de bastantes años, cuando el Decano decidió adornar el patio con

  19. A Mechanical, Microstructural, and Damage Study of Various Tailor Hot Stamped Material Conditions Consisting of Martensite, Bainite, Ferrite, and Pearlite

    Science.gov (United States)

    Bardelcik, Alexander; Vowles, Caryn J.; Worswick, Michael J.

    2018-02-01

    This paper examines the mechanical, microstructural, and damage characteristics of five different material conditions that were created using the tailored hot stamping process with in-die heating. The tailored material conditions, TMC1 to TMC5 (softest-hardest), were created using die temperatures ranging from 700 °C to 400 °C, respectively. The tensile strength (and total elongation) ranged from 615 MPa (0.24) for TMC1 to 1122 MPa (0.11) for TMC5. TMC3 and TMC4 exhibited intermediate strength levels, with almost no increase in total elongation relative to TMC5. FE-SEM microscopy was used to quantify the mixed-phase microstructures, which ranged in volume fractions of ferrite, pearlite, bainite, and martensite. High-resolution optical microscopy was used to quantify void accumulation and showed that the total void area fraction at 0.60 thickness strain was low for TMC1 and TMC5 ( 0.09 pct) and highest for TMC3 (0.31 pct). Damage modes were characterized and revealed that the poor damage behavior of TMC3 (martensite/bainite/ferrite composition) was a result of small martensitic grains forming at grain boundaries and grain boundary junctions, which facilitated void nucleation as shown by the highest measured void density for this particular material condition. The excellent ductility of TMC1 was a result of a large grained ferritic/pearlitic microstructure that was less susceptible to void nucleation and growth. Large titanium nitride (TiN) inclusions were observed in all of the tailored material conditions and it was shown that they noticeably contributed to the total void accumulation, specifically for the TMC3 and TMC4 material conditions.

  20. Optimization of the blankholder force distribution with application to the stamping of a car front door panel (Numisheet'99)

    International Nuclear Information System (INIS)

    Ayed, L. Ben; Delameziere, A.; Batoz, J.L.; Knopf-Lenoir, C.

    2005-01-01

    New materials such as dual phase steel or aluminium and complex geometries of industrial parts increase the difficulties to obtain a defect free part by stamping. One way of solution is a better regulation of the blankholder pressures. Our work is based on an original idea of Siegert, Haeussermann and Haller. The goal is to control the movement of the blank under the blankholder. Thanks to a deformable flexible blankholder, it is possible to create some independent zones. In each zone, a blankholder force can be applied on the sheet, so that a strong force can hold the blank in a zone, and a smaller one can let it move in another zone. The methodology is presented as well as some results dealing with the optimization of the blankholder force considering the drawing of a front door panel (Numisheet'99 benchmark test). The numerical simulations are performed using ABAQUS Explicit. The parameters of the finite element model (mesh density, speed of punch) are set to achieve a good prediction with a minimum simulation time. The objective function is defined to minimize the work of the punch. Three inequality constraints functions were defined to avoid necking and wrinkling. To avoid necking, the major stress of the blank is limited to a value, which is determined by using the modified maximum force criterion (MMFC). To avoid wrinkling, under the blankholder, the angle between the blankholder surface and an element of the blank is limited to a value set by the user, as proposed by Gelin and Labergere. However, in the useful part of the workpiece, the major stress is limited to a value, which was proposed by Brunet, Batoz and Bouabdallah. For the localization of the optimum, we use a response surface method computed with a diffuse approximation and coupled with an adaptative strategy to update the research space

  1. Optimization of the blankholder force distribution with application to the stamping of a car front door panel (Numisheet'99)

    Science.gov (United States)

    Ayed, L. Ben; Delamézière, A.; Batoz, J. L.; Knopf-Lenoir, C.

    2005-08-01

    New materials such as dual phase steel or aluminium and complex geometries of industrial parts increase the difficulties to obtain a defect free part by stamping. One way of solution is a better regulation of the blankholder pressures. Our work is based on an original idea of Siegert, Häussermann and Haller. The goal is to control the movement of the blank under the blankholder. Thanks to a deformable flexible blankholder, it is possible to create some independent zones. In each zone, a blankholder force can be applied on the sheet, so that a strong force can hold the blank in a zone, and a smaller one can let it move in another zone. The methodology is presented as well as some results dealing with the optimization of the blankholder force considering the drawing of a front door panel (Numisheet'99 benchmark test). The numerical simulations are performed using ABAQUS Explicit. The parameters of the finite element model (mesh density, speed of punch) are set to achieve a good prediction with a minimum simulation time. The objective function is defined to minimize the work of the punch. Three inequality constraints functions were defined to avoid necking and wrinkling. To avoid necking, the major stress of the blank is limited to a value, which is determined by using the modified maximum force criterion (MMFC). To avoid wrinkling, under the blankholder, the angle between the blankholder surface and an element of the blank is limited to a value set by the user, as proposed by Gelin and Labergere. However, in the useful part of the workpiece, the major stress is limited to a value, which was proposed by Brunet, Batoz and Bouabdallah. For the localization of the optimum, we use a response surface method computed with a diffuse approximation and coupled with an adaptative strategy to update the research space.

  2. Why do low-income women not use food stamps? Findings from the California Women's Health Survey.

    Science.gov (United States)

    Kaiser, Lucia

    2008-12-01

    To determine factors associated with Food Stamp Program (FSP) participation in a potentially eligible California population. The California Women's Health Survey is an on-going annual telephone survey that collects data about health-related attitudes and behaviours from a randomly selected sample of women. Statistical procedures included chi2 and logistic regression. California, USA, from 2002 to 2004. A total of 527 FSP female participants and 1405 potentially eligible non-participant females, aged 18 years and older. The following characteristics remained independently and positively related to FSP participation: single mother with children; unemployed; on welfare; on WIC (the Special Supplemental Nutrition Program for Women, Infants, and Children); and US-born. Women under 25 years and those over 54 years were less likely to participate than women aged 25-54 years. Hispanic/Latino ethnicity was also negatively related to participation. Over 42 % of potentially eligible non-participants cited 'don't need them' as the reason for not applying for FSP, but 34.9 % either do not think they are eligible or do not know how to apply. Potentially eligible non-participants who cite 'don't need them' as a reason for not applying are less likely to be food insecure, to have inadequate income and to use alternative emergency aid, compared to women citing all other reasons. The highest level of need is among those who cite worry about citizenship or stigma as reasons for not applying. Strategies to increase participation in FSP should incorporate messages that change the public's perception of the programme, in addition to simplifying the application process, raising awareness of eligibility criteria and improving customer service.

  3. A Mechanical, Microstructural, and Damage Study of Various Tailor Hot Stamped Material Conditions Consisting of Martensite, Bainite, Ferrite, and Pearlite

    Science.gov (United States)

    Bardelcik, Alexander; Vowles, Caryn J.; Worswick, Michael J.

    2018-04-01

    This paper examines the mechanical, microstructural, and damage characteristics of five different material conditions that were created using the tailored hot stamping process with in-die heating. The tailored material conditions, TMC1 to TMC5 (softest-hardest), were created using die temperatures ranging from 700 °C to 400 °C, respectively. The tensile strength (and total elongation) ranged from 615 MPa (0.24) for TMC1 to 1122 MPa (0.11) for TMC5. TMC3 and TMC4 exhibited intermediate strength levels, with almost no increase in total elongation relative to TMC5. FE-SEM microscopy was used to quantify the mixed-phase microstructures, which ranged in volume fractions of ferrite, pearlite, bainite, and martensite. High-resolution optical microscopy was used to quantify void accumulation and showed that the total void area fraction at 0.60 thickness strain was low for TMC1 and TMC5 ( 0.09 pct) and highest for TMC3 (0.31 pct). Damage modes were characterized and revealed that the poor damage behavior of TMC3 (martensite/bainite/ferrite composition) was a result of small martensitic grains forming at grain boundaries and grain boundary junctions, which facilitated void nucleation as shown by the highest measured void density for this particular material condition. The excellent ductility of TMC1 was a result of a large grained ferritic/pearlitic microstructure that was less susceptible to void nucleation and growth. Large titanium nitride (TiN) inclusions were observed in all of the tailored material conditions and it was shown that they noticeably contributed to the total void accumulation, specifically for the TMC3 and TMC4 material conditions.

  4. Selective attention without a neocortex.

    Science.gov (United States)

    Krauzlis, Richard J; Bogadhi, Amarender R; Herman, James P; Bollimunta, Anil

    2018-05-01

    Selective attention refers to the ability to restrict neural processing and behavioral responses to a relevant subset of available stimuli, while simultaneously excluding other valid stimuli from consideration. In primates and other mammals, descriptions of this ability typically emphasize the neural processing that takes place in the cerebral neocortex. However, non-mammals such as birds, reptiles, amphibians and fish, which completely lack a neocortex, also have the ability to selectively attend. In this article, we survey the behavioral evidence for selective attention in non-mammals, and review the midbrain and forebrain structures that are responsible. The ancestral forms of selective attention are presumably selective orienting behaviors, such as prey-catching and predator avoidance. These behaviors depend critically on a set of subcortical structures, including the optic tectum (OT), thalamus and striatum, that are highly conserved across vertebrate evolution. In contrast, the contributions of different pallial regions in the forebrain to selective attention have been subject to more substantial changes and reorganization. This evolutionary perspective makes plain that selective attention is not a function achieved de novo with the emergence of the neocortex, but instead is implemented by circuits accrued and modified over hundreds of millions of years, beginning well before the forebrain contained a neocortex. Determining how older subcortical circuits interact with the more recently evolved components in the neocortex will likely be crucial for understanding the complex properties of selective attention in primates and other mammals, and for identifying the etiology of attention disorders. Published by Elsevier Ltd.

  5. Extended attention span training system

    Science.gov (United States)

    Pope, Alan T.; Bogart, Edward H.

    1991-01-01

    Attention Deficit Disorder (ADD) is a behavioral disorder characterized by the inability to sustain attention long enough to perform activities such as schoolwork or organized play. Treatments for this disorder include medication and brainwave biofeedback training. Brainwave biofeedback training systems feed back information to the trainee showing him how well he is producing the brainwave pattern that indicates attention. The Extended Attention Span Training (EAST) system takes the concept a step further by making a video game more difficult as the player's brainwaves indicate that attention is waning. The trainee can succeed at the game only by maintaining an adequate level of attention. The EAST system is a modification of a biocybernetic system that is currently being used to assess the extent to which automated flight management systems maintain pilot engagement. This biocybernetic system is a product of a program aimed at developing methods to evaluate automated flight deck designs for compatibility with human capabilities. The EAST technology can make a contribution in the fields of medical neuropsychology and neurology, where the emphasis is on cautious, conservative treatment of youngsters with attention disorders.

  6. The Role of Sustained Attention in the Production of Conjoined Noun Phrases: An Individual Differences Study

    NARCIS (Netherlands)

    Jongman, S.R.; Meyer, A.S.; Roelofs, A.P.A.

    2015-01-01

    It has previously been shown that language production, performed simultaneously with a nonlinguistic task, involves sustained attention. Sustained attention concerns the ability to maintain alertness over time. Here, we aimed to replicate the previous finding by showing that individuals call upon

  7. The effectiveness of EEG-feedback on attention, impulsivity and EEG : A sham feedback controlled study

    NARCIS (Netherlands)

    Logemann, H. N. Alexander; Lansbergen, Marieke M.; Van Os, Titus W. D. P.; Bocker, Koen B. E.; Kenemans, J. Leon

    2010-01-01

    EEG-feedback, also called neurofeedback, is a training procedure aimed at altering brain activity, and is used as a treatment for disorders like Attention Deficit/Hyperactivity Disorder (ADHD). Studies have reported positive effects of neurofeedback on attention and other dependent variables.

  8. Call for human contact and support

    DEFF Research Database (Denmark)

    Loft, Mia Ingerslev; Martinsen, Bente; Esbensen, Bente Appel

    2017-01-01

    and helpful, but were unclear about the nursing staff’s function in rehabilitation which, in the patients’ perspective, equals physical training.Implications for RehabilitationNursing staff need to pay attention to the patients’ needs, existential thoughts and concerns during inpatient rehabilitation.......Meaningful goals for the rehabilitation of stroke patients are crucial, and it is vital that the patients commit to the goals.Patients expected polite and helpful nurses, but did not see them as therapeutic and active stakeholders, thus it is important that nursing staff present themselves as part...... of the interdisciplinary rehabilitation.There is a need for training and education of nursing staff, both pre and post graduate....

  9. Sleep: A 'Wake-up' Call.

    Science.gov (United States)

    Dhamangaonkar, A C

    2013-11-01

    This report aims to attract attention toward the importance of sleep in medical students and young resident doctors. With growing stress levels among students, sleep problems have become a common affair. Concepts like sleep disorders, chronotypes, indicators of sleep deprivation are worth knowing. As found in a questionnaire-based review, significant gaps in sleep education exist today among medical students. There are many health hazards of sleep deprivation like anxiety, depression, hypertension, obesity, diabetes, increased error rate at work, breast malignancy, decreased dexterity and adverse impact on academic performance that are dealt with in this article. These issues are not covered well in the conventional didactic lectures on 'sleep' in the medical curriculum. The medical profession demands health caregivers to stay up all night and keep working. Hence, the current medical education curriculum should lay special emphasis on sleep education.

  10. The interactions of multisensory integration with endogenous and exogenous attention

    Science.gov (United States)

    Tang, Xiaoyu; Wu, Jinglong; Shen, Yong

    2016-01-01

    Stimuli from multiple sensory organs can be integrated into a coherent representation through multiple phases of multisensory processing; this phenomenon is called multisensory integration. Multisensory integration can interact with attention. Here, we propose a framework in which attention modulates multisensory processing in both endogenous (goal-driven) and exogenous (stimulus-driven) ways. Moreover, multisensory integration exerts not only bottom-up but also top-down control over attention. Specifically, we propose the following: (1) endogenous attentional selectivity acts on multiple levels of multisensory processing to determine the extent to which simultaneous stimuli from different modalities can be integrated; (2) integrated multisensory events exert top-down control on attentional capture via multisensory search templates that are stored in the brain; (3) integrated multisensory events can capture attention efficiently, even in quite complex circumstances, due to their increased salience compared to unimodal events and can thus improve search accuracy; and (4) within a multisensory object, endogenous attention can spread from one modality to another in an exogenous manner. PMID:26546734

  11. The interactions of multisensory integration with endogenous and exogenous attention.

    Science.gov (United States)

    Tang, Xiaoyu; Wu, Jinglong; Shen, Yong

    2016-02-01

    Stimuli from multiple sensory organs can be integrated into a coherent representation through multiple phases of multisensory processing; this phenomenon is called multisensory integration. Multisensory integration can interact with attention. Here, we propose a framework in which attention modulates multisensory processing in both endogenous (goal-driven) and exogenous (stimulus-driven) ways. Moreover, multisensory integration exerts not only bottom-up but also top-down control over attention. Specifically, we propose the following: (1) endogenous attentional selectivity acts on multiple levels of multisensory processing to determine the extent to which simultaneous stimuli from different modalities can be integrated; (2) integrated multisensory events exert top-down control on attentional capture via multisensory search templates that are stored in the brain; (3) integrated multisensory events can capture attention efficiently, even in quite complex circumstances, due to their increased salience compared to unimodal events and can thus improve search accuracy; and (4) within a multisensory object, endogenous attention can spread from one modality to another in an exogenous manner. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Cold-Blooded Attention: Finger Temperature Predicts Attentional Performance

    Science.gov (United States)

    Vergara, Rodrigo C.; Moënne-Loccoz, Cristóbal; Maldonado, Pedro E.

    2017-01-01

    Thermal stress has been shown to increase the chances of unsafe behavior during industrial and driving performances due to reductions in mental and attentional resources. Nonetheless, establishing appropriate safety standards regarding environmental temperature has been a major problem, as modulations are also be affected by the task type, complexity, workload, duration, and previous experience with the task. To bypass this attentional and thermoregulatory problem, we focused on the body rather than environmental temperature. Specifically, we measured tympanic, forehead, finger and environmental temperatures accompanied by a battery of attentional tasks. We considered a 10 min baseline period wherein subjects were instructed to sit and relax, followed by three attentional tasks: a continuous performance task (CPT), a flanker task (FT) and a counting task (CT). Using multiple linear regression models, we evaluated which variable(s) were the best predictors of performance. The results showed a decrement in finger temperature due to instruction and task engagement that was absent when the subject was instructed to relax. No changes were observed in tympanic or forehead temperatures, while the environmental temperature remained almost constant for each subject. Specifically, the magnitude of the change in finger temperature was the best predictor of performance in all three attentional tasks. The results presented here suggest that finger temperature can be used as a predictor of alertness, as it predicted performance in attentional tasks better than environmental temperature. These findings strongly support that peripheral temperature can be used as a tool to prevent unsafe behaviors and accidents. PMID:28955215

  13. Cold-Blooded Attention: Finger Temperature Predicts Attentional Performance

    Directory of Open Access Journals (Sweden)

    Rodrigo C. Vergara

    2017-09-01

    Full Text Available Thermal stress has been shown to increase the chances of unsafe behavior during industrial and driving performances due to reductions in mental and attentional resources. Nonetheless, establishing appropriate safety standards regarding environmental temperature has been a major problem, as modulations are also be affected by the task type, complexity, workload, duration, and previous experience with the task. To bypass this attentional and thermoregulatory problem, we focused on the body rather than environmental temperature. Specifically, we measured tympanic, forehead, finger and environmental temperatures accompanied by a battery of attentional tasks. We considered a 10 min baseline period wherein subjects were instructed to sit and relax, followed by three attentional tasks: a continuous performance task (CPT, a flanker task (FT and a counting task (CT. Using multiple linear regression models, we evaluated which variable(s were the best predictors of performance. The results showed a decrement in finger temperature due to instruction and task engagement that was absent when the subject was instructed to relax. No changes were observed in tympanic or forehead temperatures, while the environmental temperature remained almost constant for each subject. Specifically, the magnitude of the change in finger temperature was the best predictor of performance in all three attentional tasks. The results presented here suggest that finger temperature can be used as a predictor of alertness, as it predicted performance in attentional tasks better than environmental temperature. These findings strongly support that peripheral temperature can be used as a tool to prevent unsafe behaviors and accidents.

  14. Assessing attentional systems in children with Attention Deficit Hyperactivity Disorder.

    Science.gov (United States)

    Casagrande, Maria; Martella, Diana; Ruggiero, Maria Cleonice; Maccari, Lisa; Paloscia, Claudio; Rosa, Caterina; Pasini, Augusto

    2012-01-01

    The aim of this study was to evaluate the efficiency and interactions of attentional systems in children with Attention Deficit Hyperactivity Disorder (ADHD) by considering the effects of reinforcement and auditory warning on each component of attention. Thirty-six drug-naïve children (18 children with ADHD/18 typically developing children) performed two revised versions of the Attentional Network Test, which assess the efficiency of alerting, orienting, and executive systems. In feedback trials, children received feedback about their accuracy, whereas in the no-feedback trials, feedback was not given. In both conditions, children with ADHD performed more slowly than did typically developing children. They also showed impairments in the ability to disengage attention and in executive functioning, which improved when alertness was increased by administering the auditory warning. The performance of the attentional networks appeared to be modulated by the absence or the presence of reinforcement. We suggest that the observed executive system deficit in children with ADHD could depend on their low level of arousal rather than being an independent disorder. © The Author 2011. Published by Oxford University Press. All rights reserved.

  15. LOS CITADINOS DE LA CALLE, NOMADAS URBANOS

    Directory of Open Access Journals (Sweden)

    Javier Omar Ruiz A.

    1999-01-01

    Full Text Available La ciudad es uno de los puntos de llegada del proceso civilizatorio que ha seguido la humanidad, pero es un punto de llegada que no es uniforme ni homogéneo. La ciudad es tan diversa como las dinámicas de vida de los ciudadanos. La manera como sus habitantes habitan la ciudad hace una de esas diferencias: Unos de manera sedentaria, otros como nómadas. La mayoría moviéndose puertas adentro, desde categorías de lo privado y lo público que no son las mismas para quienes viven explorando permanentemente la cara "callejera" de la ciudad. Junto a la ciudad sedentaria circula una ciudad nómada a otros ritmos, a otras velocidades, con otra lógica; como si un atavismo convocara a la libertad de las calles.

  16. Early vision and visual attention

    Directory of Open Access Journals (Sweden)

    Gvozdenović Vasilije P.

    2003-01-01

    Full Text Available The question whether visual perception is spontaneous, sudden or is running through several phases, mediated by higher cognitive processes, was raised ever since the early work of Gestalt psychologists. In the early 1980s, Treisman proposed the feature integration theory of attention (FIT, based on the findings of neuroscience. Soon after publishing her theory a new scientific approach appeared investigating several visual perception phenomena. The most widely researched were the key constructs of FIT, like types of visual search and the role of the attention. The following review describes the main studies of early vision and visual attention.

  17. Calle y calles de Brasil: imágenes, lecturas y etnografías

    Directory of Open Access Journals (Sweden)

    Urpi Montoya-Uriarte

    2015-08-01

    Full Text Available En este artículo me propongo reflexionar acerca de la calle de la ciudad contemporánea, movida por una pasión por lo urbano y una formación en antropología. La vida de las calles nos dice mucho sobre el tipo de ciudad en las que se encuentran. Sin embargo, son pocos los esfuerzos para captarla en sus detalles, particularidades, singularidades. Como urbanistas, parecemos conformarnos con las imágenes mentales que tenemos de ellas y como intelectuales, muchas veces, nos contentamos con reproducir teorías ya consagradas sobre las características y el papel de las calles en nuestras sociedades. Así, estas líneas comienzan discutiendo algunas imágenes mentales que gran parte de los habitantes de las ciudades modernas tenemos en torno a la calle. Expongo después algunas propuestas de lectura que consagrados intelectuales brasileños hicieron sobre la calle en ese país. 

  18. Development of echolocation calls and neural selectivity for echolocation calls in the pallid bat.

    Science.gov (United States)

    Razak, Khaleel A; Fuzessery, Zoltan M

    2015-10-01

    Studies of birdsongs and neural selectivity for songs have provided important insights into principles of concurrent behavioral and auditory system development. Relatively little is known about mammalian auditory system development in terms of vocalizations or other behaviorally relevant sounds. This review suggests echolocating bats are suitable mammalian model systems to understand development of auditory behaviors. The simplicity of echolocation calls with known behavioral relevance and strong neural selectivity provides a platform to address how natural experience shapes cortical receptive field (RF) mechanisms. We summarize recent studies in the pallid bat that followed development of echolocation calls and cortical processing of such calls. We also discuss similar studies in the mustached bat for comparison. These studies suggest: (1) there are different developmental sensitive periods for different acoustic features of the same vocalization. The underlying basis is the capacity for some components of the RF to be modified independent of others. Some RF computations and maps involved in call processing are present even before the cochlea is mature and well before use of echolocation in flight. Others develop over a much longer time course. (2) Normal experience is required not just for refinement, but also for maintenance, of response properties that develop in an experience independent manner. (3) Experience utilizes millisecond range changes in timing of inhibitory and excitatory RF components as substrates to shape vocalization selectivity. We suggest that bat species and call diversity provide a unique opportunity to address developmental constraints in the evolution of neural mechanisms of vocalization processing. © 2014 Wiley Periodicals, Inc.

  19. Sharing programming resources between Bio* projects through remote procedure call and native call stack strategies

    DEFF Research Database (Denmark)

    Prins, Pjotr; Goto, Naohisa; Yates, Andrew

    2012-01-01

    for different languages, it is possible to share components by bridging computer languages and Bio* projects, such as BioPerl, Biopython, BioRuby, BioJava, and R/Bioconductor. In this chapter, we compare the two principal approaches for sharing software between different programming languages: either by remote......Open-source software (OSS) encourages computer programmers to reuse software components written by others. In evolutionary bioinformatics, OSS comes in a broad range of programming languages, including C/C++, Perl, Python, Ruby, Java, and R. To avoid writing the same functionality multiple times...... procedure call (RPC) or by sharing a local call stack. RPC provides a language-independent protocol over a network interface; examples are RSOAP and Rserve. The local call stack provides a between-language mapping not over the network interface, but directly in computer memory; examples are R bindings, RPy...

  20. Visual attention in posterior stroke

    DEFF Research Database (Denmark)

    Fabricius, Charlotte; Petersen, Anders; Iversen, Helle K

    Objective: Impaired visual attention is common following strokes in the territory of the middle cerebral artery, particularly in the right hemisphere. However, attentional effects of more posterior lesions are less clear. The aim of this study was to characterize visual processing speed...... and apprehension span following posterior cerebral artery (PCA) stroke. We also relate these attentional parameters to visual word recognition, as previous studies have suggested that reduced visual speed and span may explain pure alexia. Methods: Nine patients with MR-verified focal lesions in the PCA......-territory (four left PCA; four right PCA; one bilateral, all >1 year post stroke) were compared to 25 controls using single case statistics. Visual attention was characterized by a whole report paradigm allowing for hemifield-specific speed and span measurements. We also characterized visual field defects...