Martensitic microstructural transformations from the hot stamping, quenching and partitioning process

International Nuclear Information System (INIS)

Liu Heping; Jin Xuejun; Dong Han; Shi Jie

2011-01-01

Hot stamping, which combines forming and quenching in one process, produces high strength steels with limited ductility because the quenching is uncontrolled. A new processing technique has been proposed in which the hot stamping step is followed by a controlled quenching and partitioning process, producing a microstructure containing retained austenite and martensite. To investigate this microstructure, specimens were heated at a rate of 10 deg. C/s to the austenitizing temperature of 900 deg. C, held for 5 min to eliminate thermal gradients, and cooled at a rate of 50 deg. C/s to a quenching temperature of 300 deg. C, which is between the martensite start temperature and the martensite finish temperatures. The resulting microstructure was examined using optical microscope, scanning electron microscopy and transmission electron microscopy. The material produced contains irregular, fragmented martensite plates, a result of the improved strength of the austenite phase and the constraints imposed by a high dislocation density. - Research Highlights: → A novel heat treatment of advanced high strength steels is proposed. → The processing technique is hot stamping plus quenching and partitioning process. → The material produced contains irregular, fragmented martensite plates. → The reason is strength of austenite phase and constraint of dislocation density.

Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

International Nuclear Information System (INIS)

Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

2017-01-01

The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

Energy Technology Data Exchange (ETDEWEB)

Li, Xiaodong [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Chang, Ying, E-mail: yingc@dlut.edu.cn [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Wang, Cunyu [East China Branch of Central Iron & Steel Research Institute (CISRI), Beijing 100081 (China); Hu, Ping [School of Automotive Engineering, State Key Lab of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 (China); Dong, Han [East China Branch of Central Iron & Steel Research Institute (CISRI), Beijing 100081 (China)

2017-01-02

The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M{sub s} temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

Sulforaphane inhibits osteoclast differentiation by suppressing the cell-cell fusion molecules DC-STAMP and OC-STAMP

International Nuclear Information System (INIS)

Takagi, Tomohiro; Inoue, Hirofumi; Takahashi, Nobuyuki; Katsumata-Tsuboi, Rie; Uehara, Mariko

2017-01-01

Sulforaphane (SFN), a kind of isothiocyanate, is derived from broccoli sprouts. It has anti-tumor, anti-inflammatory, and anti-oxidation activity. The molecular function of SFN in the inhibition of osteoclast differentiation is not well-documented. In this study, we assessed the effect of SFN on osteoclast differentiation in vitro. SFN inhibited osteoclast differentiation in both bone marrow cells and RAW264.7 cells. Key molecules involved in the inhibitory effects of SFN on osteoclast differentiation were determined using a microarray analysis, which showed that SFN inhibits osteoclast-associated genes, such as osteoclast-associated receptor (OSCAR), nuclear factor of activated T cells cytoplasmic-1, tartrate-resistant acid phosphatase, and cathepsin K. Moreover, the mRNA expression levels of the cell-cell fusion molecules dendritic cell specific transmembrane protein (DC-STAMP) and osteoclast stimulatory transmembrane protein (OC-STAMP) were strongly suppressed in cells treated with SFN. Furthermore, SFN increased the phosphorylation of signal transducer and activator of transcription 1 (STAT1), a regulator of macrophage and osteoclast cell fusion. Thus, our data suggested that SFN significantly inhibits the cell-cell fusion molecules DC-STAMP and OC-STAMP by inducing the phosphorylation of STAT1 (Tyr701), which might be regulated by interactions with OSCAR. - Highlights: • Sulforaphane inhibited osteoclast differentiation and osteoclast cell-fusion. • Sulforaphane suppressed not only NFATc1, but also cell-cell fusion molecules, DC-STAMP and OC-STAMP. • Sulforaphane decreased multinucleated osteoclasts, whereas increased mono-nucleated osteoclasts. • Sulforaphane inhibits the cell-cell fusion by inducing the phosphorylation of STAT1 (Tyr701).

STAMP alters the growth of transformed and ovarian cancer cells

International Nuclear Information System (INIS)

He, Yuanzheng; Blackford, John A Jr; Kohn, Elise C; Simons, S Stoney Jr

2010-01-01

Steroid receptors play major roles in the development, differentiation, and homeostasis of normal and malignant tissue. STAMP is a novel coregulator that not only enhances the ability of p160 coactivator family members TIF2 and SRC-1 to increase gene induction by many of the classical steroid receptors but also modulates the potency (or EC 50 ) of agonists and the partial agonist activity of antisteroids. These modulatory activities of STAMP are not limited to gene induction but are also observed for receptor-mediated gene repression. However, a physiological role for STAMP remains unclear. The growth rate of HEK293 cells stably transfected with STAMP plasmid and overexpressing STAMP protein is found to be decreased. We therefore asked whether different STAMP levels might also contribute to the abnormal growth rates of cancer cells. Panels of different stage human cancers were screened for altered levels of STAMP mRNA. Those cancers with the greatest apparent changes in STAMP mRNA were pursued in cultured cancer cell lines. Higher levels of STAMP are shown to have the physiologically relevant function of reducing the growth of HEK293 cells but, unexpectedly, in a steroid-independent manner. STAMP expression was examined in eight human cancer panels. More extensive studies of ovarian cancers suggested the presence of higher levels of STAMP mRNA. Lowering STAMP mRNA levels with siRNAs alters the proliferation of several ovarian cancer tissue culture lines in a cell line-specific manner. This cell line-specific effect of STAMP is not unique and is also seen for the conventional effects of STAMP on glucocorticoid receptor-regulated gene transactivation. This study indicates that a physiological function of STAMP in several settings is to modify cell growth rates in a manner that can be independent of steroid hormones. Studies with eleven tissue culture cell lines of ovarian cancer revealed a cell line-dependent effect of reduced STAMP mRNA on cell growth rates. This

Hot stamping advanced manufacturing technology of lightweight car body

CERN Document Server

Hu, Ping; He, Bin

2017-01-01

This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

Influence of prepreg characteristics on stamp consolidation

Science.gov (United States)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2017-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and partial preconsolidation. This partial preconsolidation makes the influence of prepreg more critical compared to conventional preconsolidation methods which provide full preconsolidation. This paper aims to highlight consolidation challenges that can appear when stamp forming blanks manufactured by automated lay-up. Important prepreg characteristics were identified based on an experimental study where a comparison was made between various prepreg in their as-received, deconsolidated and stamp consolidated state. It was found that adding up small thickness variations across the width of a prepreg when stacking plies into a blank by automated lay-up can cause non-uniform consolidation. Additionally, deconsolidation of the prepreg does not seem to obstruct interlaminar bonding, while intralaminar voids initially present in a prepreg cannot be removed during stamp forming. An additional preconsolidation step after automated lay-up seems necessary to remove blank thickness variations and intralaminar voids for the current prepregs. Eliminating this process step and the successful combination of rapid automated lay-up and stamp forming requires prepregs which are void-free and have less thickness variation.

Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithography

International Nuclear Information System (INIS)

Landis, S; Chaix, N; Gourgon, C; Perret, C; Leveder, T

2006-01-01

Sub-100 nm resolution on a 200 mm silicon stamp has been hot embossed into commercial Sumitomo NEB 22 resist. A single pattern, exposed with electron beam lithography, has been considered to define the stamp and thus make it possible to point out the impact of stamp design on the printing. These results may be considered as a first attempt to define rules to solve the proximity printing effects (PPEs). Moreover, a large range of initial resist thickness, from 56 to 506 nm, has been spin coated to assess the effect of polymer flow properties for the stamp cavity filling and the printed defects. A detailed analysis of the printed resist in dense hole patterns showed that the application volume conservation is enough to calculate the residual layer thickness as the height of the printed resist feature. Good accordance has been obtained between the theoretical approach and experimental results. Moreover, the impact of the pattern symmetry breakdown on mould deformation is clearly shown in this paper in the printed areas as well as in the unprinted areas

Ex-Post : The Investment Performance of Collectible Stamps

NARCIS (Netherlands)

Dimson, E.; Spaenjers, C.

2009-01-01

This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

The effect of cushion-ram pulsation on hot stamping

Science.gov (United States)

Landgrebe, Dirk; Rautenstrauch, Anja; Kunke, Andreas; Polster, Stefan; Kriechenbauer, Sebastian; Mauermann, Reinhard

2016-10-01

Hot stamping is an important technology for manufacturing high-strength components. This technology offers the possibility to achieve significant weight reductions. In this study, cushion-ram pulsation (CRP), a new technology for hot stamping on servo-screw presses, was investigated and applied for hot stamping. Compared to a conventional process, the tests yielded a significantly higher drawing depth. In this paper, the CRP technology and the first test results with hot stamping were described in comparison to the conventional process.

27 CFR 479.87 - Cancellation of stamp.

Science.gov (United States)

2010-04-01

... OTHER FIREARMS Transfer Tax Application and Order for Transfer of Firearm § 479.87 Cancellation of stamp. The method of cancellation of the stamp required by this subpart as prescribed in § 479.67 shall be used. Exemptions Relating to Transfers of Firearms ...

Influence of Prepreg Characteristics on Stamp Consolidation

NARCIS (Netherlands)

Slange, T.K.; Warnet, L.L.; Grouve, W.J.B.; Akkerman, R.

2017-01-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and

Analysis of alternative technologies stamping compressor blades of marine engines

Directory of Open Access Journals (Sweden)

Олександр Сергійович Аніщенко

2015-10-01

Full Text Available The author has made an analysis of several technologies stamping forgings compressor blades from titanium alloy ВT3-1. These technologies use different types of forming equipment: crank hot press, high-speed hammers, screw presses with hydraulic drive (SPHD, as well as isothermal forging hydraulic press. He pointed out the main advantages and disadvantages of the technology, noting that high-speed punching in the shipbuilding industry of Ukraine is not used for the manufacture of forgings blades. The article contains an economic analysis of the cost of forgings blades, which are made on four technologies: punching and calibration to crank hot press, stamping and calibration to press for isothermal forging, stamping and calibration on SPHD-press, stamping on SPHD-press and calibration to press for isothermal forging. The author has identified the effective use of these technologies. He showed that the use of SPHD-presses and hydraulic presses for isothermal forging reduces the cost of forging on the average 12% in comparison with the technology at the crank hot stamping press, increases the utilization of metal 1,3-1,5 times more, reduces power consumption 1,05-3,0 times less and complexity of manufacturing 1,8-4,2 times. However SPHD-press increases capital investment in the organization of stamping technology 2,6-5,3 times more and depreciation 2-4 times. Isothermal forging technology requires the cost of the stamps in 1,4-2,0 times higher than stamps for crank presses. The author argues that stamping forging blades technology improvement should be implemented saving basic materials first of all. Efficiency of isothermal stamping and calibration will be the higher, the more geometric dimensions of stamped forgings are

DC-STAMP Is an Osteoclast Fusogen Engaged in Periodontal Bone Resorption.

Science.gov (United States)

Wisitrasameewong, W; Kajiya, M; Movila, A; Rittling, S; Ishii, T; Suzuki, M; Matsuda, S; Mazda, Y; Torruella, M R; Azuma, M M; Egashira, K; Freire, M O; Sasaki, H; Wang, C Y; Han, X; Taubman, M A; Kawai, T

2017-06-01

Dendritic cell-specific transmembrane protein (DC-STAMP) plays a key role in the induction of osteoclast (OC) cell fusion, as well as DC-mediated immune regulation. While DC-STAMP gene expression is upregulated in the gingival tissue with periodontitis, its pathophysiological roles in periodontitis remain unclear. To evaluate the effects of DC-STAMP in periodontitis, anti-DC-STAMP-monoclonal antibody (mAb) was tested in a mouse model of ligature-induced periodontitis ( n = 6-7/group) where Pasteurella pneumotropica ( Pp)-reactive immune response activated T cells to produce receptor activator of nuclear factor kappa-B ligand (RANKL), which, in turn, promotes the periodontal bone loss via upregulation of osteoclastogenesis. DC-STAMP was expressed on the cell surface of mature multinuclear OCs, as well as immature mononuclear OCs, in primary cultures of RANKL-stimulated bone marrow cells. Anti-DC-STAMP-mAb suppressed the emergence of large, but not small, multinuclear OCs, suggesting that DC-STAMP is engaged in the late stage of cell fusion. Anti-DC-STAMP-mAb also inhibited pit formation caused by RANKL-stimulated bone marrow cells. Attachment of ligature to a second maxillary molar induced DC-STAMP messenger RNA and protein, along with elevated tartrate-resistant acid phosphatase-positive (TRAP+) OCs and alveolar bone loss. As we expected, systemic administration of anti-DC-STAMP-mAb downregulated the ligature-induced alveolar bone loss. Importantly, local injection of anti-DC-STAMP-mAb also suppressed alveolar bone loss and reduced the total number of multinucleated TRAP+ cells in mice that received ligature attachment. Attachment of ligature induced significantly elevated tumor necrosis factor-α, interleukin-1β, and RANKL in the gingival tissue compared with the control site without ligature ( P < 0.05), which was unaffected by local injection with either anti-DC-STAMP-mAb or control-mAb. Neither in vivo anti- Pp IgG antibody nor in vitro anti- Pp T

Development of Methods and Equipment for Sheet Stamping

Science.gov (United States)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

How Do Stamp Duties Affect the Housing Market?

OpenAIRE

Davidoff, Ian; Leigh, Andrew

2013-01-01

Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

Postage stamps: A convergence of metallurgy, art, and history

Science.gov (United States)

Habashi, Fathi

2002-04-01

Postage stamps have been used around the world to commemorate, in miniature, significant events and people, including those of importance in the history of metals and mineral production. From the presence of gold artifacts in an ancient Egyptian tomb to the role of uranium in nuclear power, stamps have captured the evolution of metallurgical processes. This article highlights some of those stamps.

Failure Mechanisms of the Protective Coatings for the Hot Stamping Applications

Science.gov (United States)

Zhao, Chen

In the present study, four different nitriding techniques were carried on the ductile irons NAAMS-D6510 and cast steels NAAMS-S0050A, which are widely used stamping die materials; duplex treatments (PVD CrN coating+nitriding) were carried on H13 steels, which are common inserts for the hot stamping dies. Inclined impact-sliding wear tests were performed on the nitriding cases under simulated stamping conditions. Surface profilometer, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to investigate the wear and failure mechanisms of the protective coatings. It was found that the nitrided ductile iron samples performed better than the nitrided cast steel specimens. High temperature inclined impact-sliding wear tests were carried out on the CrN coatings. It was found that the coating performed better at elevated temperature. XPS analysis indicated the top surface layer (about 3-4nm) of the coating was oxidized at 400 °C and formed a Cr2O3 protective film. The in-situ formation of the thin Cr2O3 protective layer likely led to the change of wear mechanisms from severe adhesive failure to mild abrasive wear.

Minerals on postage stamps: A mix of art, history, economics and geography

Science.gov (United States)

Glover, Paul

2010-05-01

Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

Fast thermal nanoimprint lithography by a stamp with integrated heater

DEFF Research Database (Denmark)

Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

2008-01-01

We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

Patterning of polymers: precise channel stamping by optimizing wetting properties

International Nuclear Information System (INIS)

Seemann, Ralf; Kramer, Edward J; Lange, Frederick F

2004-01-01

Channel stamping is a soft lithography technique that can be used to fabricate small structures of polymeric materials. This technique is cheap and easy but a considerable drawback is the fact that reproduction of the patterns of the stamp is often imprecise due to the wetting properties of liquid and stamp. In this paper, we report on experiments that reveal the parameters governing the behaviour of liquids in grooves and on edges. Optimizing these parameters leads to better-quality channel-stamped structures and enables the design of sophisticated structured polymeric materials, allowing channels as small as about 100 nm to be fabricated. Moreover, we show that it is even possible to build up a freestanding three-dimensional structure by stamping line patterns on top of each other

SPS commemorative stamp

CERN Multimedia

1977-01-01

The turn on of the SPS was commemorated in France by the issue of a CERN stamp. The date of issue, 22 Octber 1976, coincided with the first tests of the beam line taking particles to experiments in the West Hall. (CERN Courier 1976 p. 382)

Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

OpenAIRE

Wood, Gavin A.

1994-01-01

The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

Digital time stamping system based on open source technologies.

Science.gov (United States)

Miskinis, Rimantas; Smirnov, Dmitrij; Urba, Emilis; Burokas, Andrius; Malysko, Bogdan; Laud, Peeter; Zuliani, Francesco

2010-03-01

A digital time stamping system based on open source technologies (LINUX-UBUNTU, OpenTSA, OpenSSL, MySQL) is described in detail, including all important testing results. The system, called BALTICTIME, was developed under a project sponsored by the European Commission under the Program FP 6. It was designed to meet the requirements posed to the systems of legal and accountable time stamping and to be applicable to the hardware commonly used by the national time metrology laboratories. The BALTICTIME system is intended for the use of governmental and other institutions as well as personal bodies. Testing results demonstrate that the time stamps issued to the user by BALTICTIME and saved in BALTICTIME's archives (which implies that the time stamps are accountable) meet all the regulatory requirements. Moreover, the BALTICTIME in its present implementation is able to issue more than 10 digital time stamps per second. The system can be enhanced if needed. The test version of the BALTICTIME service is free and available at http://baltictime. pfi.lt:8080/btws/ and http://baltictime.lnmc.lv:8080/btws/.

A compact system for large-area thermal nanoimprint lithography using smart stamps

DEFF Research Database (Denmark)

Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure...... for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment...

Programming the BasicStamp : using MacBS2

NARCIS (Netherlands)

Djajadiningrat, J.P.; Stienstra, M.

2004-01-01

This article explains how to program a BasicStamp microcontroller using a Macintosh. It takes an absolute beginner's perspective and talks you through the whole process including how to hook up a programmer board, how to write some programs in the BasisStamp language PBASIC, and how to do some

Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

Energy Technology Data Exchange (ETDEWEB)

Meng Fantao; Chu Jinkui [Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, 116024 Dalian (China); Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak [Obducat AB, SE-20125 Malmoe (Sweden); Maximov, Ivan; Montelius, Lars; Xu, H Q [Division of Solid State Physics, Lund University, Box 118, S-22100 Lund (Sweden); Nilsson, Lars, E-mail: ivan.maximov@ftf.lth.se [Department of Food Technology, Engineering and Nutrition, Lund University, Box 117, S-22100 Lund (Sweden)

2011-05-06

Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

Energy Technology Data Exchange (ETDEWEB)

Choi, So Young; Kim, Jong Do [Korea Maritime and Ocean University, Busan (Korea, Republic of); Kim, Jong Su [Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-01-15

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

International Nuclear Information System (INIS)

Choi, So Young; Kim, Jong Do; Kim, Jong Su

2015-01-01

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained

Stamp Detection in Color Document Images

DEFF Research Database (Denmark)

Micenkova, Barbora; van Beusekom, Joost

2011-01-01

, moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

CERN Document Server

Doroud, K

2017-01-01

Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

Energy Technology Data Exchange (ETDEWEB)

Doroud, K., E-mail: Katayoun.Doroud@cern.ch [CERN Geneva (Switzerland); Williams, M.C.S. [CERN Geneva (Switzerland); INFN, Bologna (Italy)

2017-03-21

Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

International Nuclear Information System (INIS)

Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

2014-01-01

With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

Microstructure, Mechanical Properties, and Toughening Mechanisms of a New Hot Stamping-Bake Toughening Steel

Science.gov (United States)

Lin, Tao; Song, Hong-Wu; Zhang, Shi-Hong; Cheng, Ming; Liu, Wei-Jie; Chen, Yun

2015-09-01

In this article, the hot stamping-bake toughening process has been proposed following the well-known concept of bake hardening. The influences of the bake time on the microstructure and the mechanical properties of the hot stamped-baked part were studied by means of scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and mechanical tests at room temperature. The results show that the amount of the retained austenite was nearly not changed by the bake process. Also observed were spherical Cu-rich precipitates of about 15 nm in martensite laths. According to the Orowan mechanism, their contribution of the Cu-rich precipitates to the strength is approximately 245 MPa. With the increase of the bake time, the tensile strength of the part was decreased, whereas both the ductility and the product of the tensile strength and ductility were increased then decreased. The tensile strength and ductility product and the tensile strength are as high as 21.9 GPa pct, 2086 MPa, respectively. The excellent combined properties are due to the transformation-induced plasticity effect caused by retained austenite.

Time Stamp Synchronization of PEFP Distributed Control Systems

International Nuclear Information System (INIS)

Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

2010-01-01

Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

A compact system for large-area thermal nanoimprint lithography using smart stamps

International Nuclear Information System (INIS)

Pedersen, R H; Hansen, O; Kristensen, A

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for µm-scale features is demonstrated

DISCUSSANT'S COMMENTS FOR AMERICAN AGRICULTURAL ECONOMICS ASSOCIATION ANNUAL MEETING, SELECTED PAPERS SESSION SP-2BB: "FOOD DEMAND, FOOD POLICY, AND FOOD MARKET ISSUES"

OpenAIRE

Jonk, Yvonne

1998-01-01

These papers investigate issues in food demand, food processing, and food markets. Policy issues are examined, both in the context of the food stamp program in the domestic market and the industrial policy options in the food sector in emerging Central European economies. The Effect of an Electronic Benefit Transfer (EBT) System on Food Expenditure of Food Stamp Recipients: Evidence from the Maryland Statewide Implementation, J. William Levedahl. Incorporating Nutrients in Food Demand Analysi...

Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

Science.gov (United States)

Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

2015-05-29

Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

Stamp duties in Indian states - a case for reform

OpenAIRE

Alm, James; Annez, Patricia; Modi, Arbind

2004-01-01

The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

Directory of Open Access Journals (Sweden)

CARAUS MADALINA

2015-12-01

Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

Application of Modified Digital Halftoning Techniques to Data Hiding in Personalized Stamps

Institute of Scientific and Technical Information of China (English)

Hsi-Chun Wang; Chi-Ming Lian; Pei-Chi Hsiao

2004-01-01

The objective of this research is to embed information in personalized stamps by modified digital halftoning techniques. The displaced and deformed halftone dots are used to encode data in the personalized stamps. Hidden information can be retrieved by either an optical decoder or digital image processing techniques.The results show that personalized stamps with value-added features like data hiding or digital watermarking can be successfully implemented.

Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

Science.gov (United States)

Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

2017-12-01

LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

27 CFR 70.332 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

Organic thin film transistors and polymer light-emitting diodes patterned by polymer inking and stamping

International Nuclear Information System (INIS)

Li Dawen; Guo, L Jay

2008-01-01

To fully realize the advantages of organic flexible electronics, patterning is very important. In this paper we show that a purely additive patterning technique, termed polymer inking and stamping, can be used to pattern conductive polymer PEDOT and fabricate sub-micron channel length organic thin film transistors. In addition, we applied the technique to transfer a stack of metal/conjugated polymer in one step and fabricated working polymer light-emitting devices. Based on the polymer inking and stamping technique, a roll-to-roll printing for high throughput fabrication has been demonstrated. We investigated and explained the mechanism of this process based on the interfacial energy consideration and by using the finite element analysis. This technique can be further extended to transfer more complex stacked layer structures, which may benefit the research on patterning on flexible substrates

Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

Directory of Open Access Journals (Sweden)

Juergen Brugger

2013-10-01

Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

Stamping the Earth from space

CERN Document Server

Dicati, Renato

2017-01-01

This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

POLYELECTROLYTE MULTILAYER STAMPING IN AQUEOUS PHASE AND NON-CONTACT MODE

Science.gov (United States)

Mehrotra, Sumit; Lee, Ilsoon; Liu, Chun; Chan, Christina

2011-01-01

Polyelectrolyte multilayer (PEM) transfer printing has been previously achieved by stamping under dry conditions. Here, we show for the first time, that PEM can be transferred from a stamp to the base substrate under aqueous conditions whereby the two surfaces are in a non-contact mode. Degradable multilayers of (PAA/PEG)10.5 followed by non-degradable multilayers of (PDAC/SPS)80.5 were fabricated under acidic pH conditions on either PDMS or glass (stamp), and subsequently transferred over top of another multilayer prepared on a different substrate (base substrate), with a spacing of ~ 200 μm between the stamping surface and the base substrate. This multilayer transfer was performed under physiological pH conditions. This process is referred to herein as non-contact, aqueous-phase multilayer (NAM) transfer. NAM transfer can be useful for applications such as fabricating three-dimensional (3-D) cellular scaffolds. We attempted to create a 3-D cellular scaffold using NAM transfer, and characterized the scaffolds with conventional and fluorescence microscopy. PMID:21860540

Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

Science.gov (United States)

Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

2018-01-01

The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

International Nuclear Information System (INIS)

Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

2007-01-01

Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

Bifunctional, Chemically Patterned Flat Stamps for Microcontact Printing of Polar Inks

NARCIS (Netherlands)

Duan, X.; Sadhu, V.B.; Perl, A.; Péter, M.; Reinhoudt, David; Huskens, Jurriaan

2008-01-01

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full

41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

Science.gov (United States)

Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

2016-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

Time-stamping system for nuclear physics experiments at RIKEN RIBF

International Nuclear Information System (INIS)

Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

2015-01-01

A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

Comparison between Laser and Stamping without Die (SWD for Micro Tapered Hole Forming

Directory of Open Access Journals (Sweden)

Yung-Chou Hung

2016-03-01

Full Text Available The forming of a micro tapered hole is based on nanosecond pulsed laser processing, which conforms to fast processing time and high throughput; however, the microhole quality should be improved. Micro stamping is a technology providing high precise size and speed. The greatest difficulty in forming a microhole by micro stamping is the precision alignment of the punch head to the lower die. In order to overcome the difficulty, we proposed a concept of stamping without die (SWD. Without a lower die, the tapered punch head was directly applied to the workpiece for micro stamping, and a thicker workpiece surrounding the punching area provides a better support to the stamping process. Thus, a successful forming of micro tapered holes is completed. The micro tapered hole depth is 300 μm, and the maximum ratio of inlet to outlet diameter is 18:1. In order to reduce the number of experiments, the finite element analysis software DEFORM-3D was used for forming analysis. The simulation forecast result was compared with the experimental processing, which was well validated. Under different experimental parameters of laser energy and defocusing distance, drilling results by two methods show that the microhole quality by stamping process is better than by laser processing.

Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

Directory of Open Access Journals (Sweden)

Liu Xiaochuan

2015-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

Directory of Open Access Journals (Sweden)

Ji Kang

2016-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

A rapid co-culture stamping device for studying intercellular communication

Science.gov (United States)

Hassanzadeh-Barforoushi, Amin; Shemesh, Jonathan; Farbehi, Nona; Asadnia, Mohsen; Yeoh, Guan Heng; Harvey, Richard P.; Nordon, Robert E.; Warkiani, Majid Ebrahimi

2016-10-01

Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two adherent cell lines with well-defined interlacing configurations to study cell-cell interactions. We demonstrate post-stamping cell viability of >95%, the stamping of multiple adherent cell types, and the ability to control the seeded cell density. We also show viability, proliferation and migration of cultured cells, enabling analysis of co-culture boundary conditions on cell fate. We also developed an in-vitro model of endothelial and cardiac stem cell interactions, which are thought to regulate coronary repair after myocardial injury. The stamp is fabricated using microfabrication techniques, is operated with a lab pipettor and uses very low reagent volumes of 20 μl with cell injection efficiency of >70%. This easy-to-use device provides a general strategy for micro-patterning of multiple cell types and will be important for studying cell-cell interactions in a multitude of applications.

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

International Nuclear Information System (INIS)

Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

2016-01-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

Science.gov (United States)

Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

2016-02-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

Directory of Open Access Journals (Sweden)

Asiyeh Amouei

2018-02-01

Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

Science.gov (United States)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

Directory of Open Access Journals (Sweden)

Rudi Kurniawan Arief

2017-12-01

Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

Determination of Proper Austenitization Temperatures for Hot Stamping of AISI 4140 Steel

Science.gov (United States)

Samadian, Pedram; Parsa, Mohammad Habibi; Shakeri, Amid

2014-04-01

High strength steels are desirable materials for use in automobile bodies in order to reduce vehicle weight and increase the safety of car passengers, but steel grades with high strength commonly show poor formability. Recently, steels with controlled microstructures and compositions are used to gain adequate strength after hot stamping while maintaining good formability during processing. In this study, microstructure evolutions and changes in mechanical properties of AISI 4140 steel sheets resulting from the hot stamping process at different austenitization temperatures were investigated. To determine the proper austenitization temperatures, the results were compared with those of the cold-worked and cold-worked plus quench-tempered specimens. Comparisons showed that the austenitization temperatures of 1000 and 1100 °C are proper for hot stamping of 3-mm-thick AISI 4140 steel sheets due to the resultant martensitic microstructure which led to the yield and ultimate tensile strength of 1.3 and 2.1 GPa, respectively. Such conditions resulted in more favorable simultaneous strength and elongation than those of hot-stamped conventional boron steels.

Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

Directory of Open Access Journals (Sweden)

Nosova Ekaterina

2017-01-01

Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

Science.gov (United States)

Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

2017-12-01

Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

27 CFR 46.116 - Issuance, distribution, and examination of special tax stamps.

Science.gov (United States)

2010-04-01

... multiple locations, TTB will send to the taxpayer's principal place of business (or principal office in the... attachment to TTB Form 5630.5t required by § 46.101(b)(2). (b) Distribution of special tax stamps for... for each location listed on the attachment to TTB Form 5630.5t and that the information on each stamp...

Kinetic and kinematic analysis of stamping impacts during simulated rucking in rugby union.

Science.gov (United States)

Oudshoorn, Bodil Y; Driscoll, Heather F; Dunn, Marcus; James, David

2018-04-01

Laceration injuries account for up to 23% of injuries in rugby union. They are frequently caused by studded footwear as a result of a player stamping onto another player during the ruck. Little is known about the kinetics and kinematics of rugby stamping impacts; current test methods assessing laceration injury risk of stud designs therefore lack informed test parameters. In this study, twelve participants stamped on an anthropomorphic test device in a one-on-one simulated ruck setting. Velocity and inclination angle of the foot prior to impact was determined from high-speed video footage. Total stamping force and individual stud force were measured using pressure sensors. Mean foot inbound velocity was 4.3 m ∙ s -1 (range 2.1-6.3 m ∙ s -1 ). Mean peak total force was 1246 N and mean peak stud force was 214 N. The total mean effective mass during stamping was 6.6 kg (range: 1.6-13.5 kg) and stud effective mass was 1.2 kg (range: 0.5-2.9 kg). These results provide representative test parameters for mechanical test devices designed to assess laceration injury risk of studded footwear for rugby union.

A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

Science.gov (United States)

Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

2011-08-01

Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

Characterization of thermoplastic composites for hot stamp forming

NARCIS (Netherlands)

Rietman, Bert; Grouve, Wouter; Akkerman, Remko

2014-01-01

This paper describes state-of-the-art characterization methods for thermoplastic composites at high processing temperature and provides a few examples of application in simulations of the hot stamp forming process.

Fabrication of Ni stamp with high aspect ratio, two-leveled, cylindrical microstructures using dry etching and electroplating

DEFF Research Database (Denmark)

Petersen, Ritika Singh; Keller, Stephan Sylvest; Hansen, Ole

2015-01-01

obtained by defining a reservoir and a separating trench with different depths of 85 and 125 μm, respectively, in a single embossing step. The fabrication of the required two leveled stamp is done using a modified DEEMO (dry etching, electroplating and molding) process. Dry etching using the Bosch process...... and electroplating are optimized to obtain a stamp with smooth stamp surfaces and a positive sidewall profile. Using this stamp, hot embossing is performed successfully with excellent yield and high replication fidelity....

Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach

Directory of Open Access Journals (Sweden)

Tao Lin

2014-06-01

Full Text Available Hot stamping tools with cooling systems are the key facilities for hot stamping process of Ultrahigh strength steels (UHSS in automotive industry. Hot stamping tools have significant influence on the final microstructure and properties of the hot stamped parts. In serials production, the tools should be rapidly cooled by cooling water. Hence, design of hot stamping tools with cooling systems is important not only for workpieces of good quality but also for the tools with good cooling performance and long life. In this paper, a new multifield simulation method was proposed for the design of hot stamping tools with cooling system. The deformation of the tools was also analyzed by this method. Based on MpCCI (Mesh-based parallel Code Coupling Interface, thermal-fluid simulation and thermal-fluid-mechanical coupled simulation were performed. Subsequently, the geometrical parameters of the cooling system are investigated for the design. The results show that, both the distance between the ducts and the distance between the ducts and the tools loaded contour have significant influence on the quenching effect. And better quenching effect can be achieved with the shorter distance from the tool surface and with smaller distance between ducts. It is also shown that, thermal expansion is the main reason for deformation of the hot forming tools, which causes the distortion of the cooling ducts, and the stress concentration at corner of the ducts.

Event for the launch of the Georges Charpak postage stamp | 26-27 February | Prévessin site

CERN Multimedia

2016-01-01

At the end of February, the French post office is releasing a new €0.70 stamp featuring an image of Georges Charpak. CERN is taking part in this event by hosting a temporary post office on the Prévessin site, which will sell the stamp with a special “first day” postmark before it goes on general sale.     Georges Charpak arrived at CERN in 1959 and, in the late 1960s, revolutionised particle detection technology by developing the multiwire proportional chamber. This technique brought particle detectors into the electronic era, setting physicists free from the laborious task of studying photographs one by one. In 1992, he was awarded the Nobel Prize in Physics for his invention. Charpak chambers are still used today in the LHC detectors and have paved the way for the technology in numerous other modern detectors. In the 1990s, Charpak was involved in developing medical applications based on particle detection technology. He was als...

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012

Directory of Open Access Journals (Sweden)

Joseph G.L. Lee

2017-12-01

Full Text Available Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties from June–October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s (<1%. However, a substantial minority of cigarette packs had damaged tax stamps (13%. This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser. Keywords: Taxes, Smoking, Tobacco products, Government regulation, Government

Soil Temperature and Moisture Profile (STAMP) System Handbook

Energy Technology Data Exchange (ETDEWEB)

Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-11-01

The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

Effects of surface coating on weld growth of resistance spot-welded hot-stamped boron steels

International Nuclear Information System (INIS)

Ji, Chang Wook; Lee, Hyun Ju; Kim, Yang Do; Jo, Il Guk; Choi, Il Dong; Park, Yeong Do

2014-01-01

Aluminum-silicon-based and zinc-based metallic coatings have been widely used for hot-stamped boron steel in automotive applications. In this study, resistance spot weldability was explored by investigating the effects of the properties of metallic coating layers on heat development and nugget growth during resistance spot welding. In the case of the aluminum-silicon-coated hot-stamped boron steel, the intermetallic coating transformed into a liquid film that covered the faying interface. A wide, weldable current range was obtained with slow heat development because of low contact resistance and large current passage. In the case of the zinc-coated hot-stamped boron steel, a buildup of liquid and vapor formation under large vapor pressure was observed at the faying interface because of the high contact resistance and low vaporization temperature of the intermetallic layers. With rapid heat development, the current passage was narrow because of the limited continuous layer at the faying interface. A more significant change in nugget growth was observed in the zinc coated hot-stamped boron steel than in the aluminum-silicon-coated hot-stamped boron steel.

STAMP model and its application prospect in DCS safety analysis of nuclear power plant

International Nuclear Information System (INIS)

Yang Xiaohua; Liu Jie; Liu Zhaohui; Liu Hua; Yu Tonglan

2013-01-01

The application of DCS (Digit Control System) is a certain trend for the development of nuclear power. DCS not only improves the control capability of nuclear power system, but also increases the complexity of the system. Traditional safety analysis techniques based on event-chain model are facing challenges. In order to improve the safety performance of nuclear power DCS, the latest research achievement in the field of safety engineering should be focused, studied and applied into nuclear power safety. This paper introduces a new safety analysis model named STAMP (Systems-Theoretic Accident Modeling and Processes) based on the system theory, analyzes its advantages and disadvantages compared with the traditional ones, and explains the basic steps of STPA (STAMP-Based Hazard Analysis) technology. Finally, according to the application status of STAMP at home and abroad, it prospects the development of STAMP in China's nuclear power safety. (authors)

Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

CERN Document Server

Lim, Yongseob; Ulsoy, A Galip

2014-01-01

Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

Stamping of Thin-Walled Structural Components with Magnesium Alloy AZ31 Sheets

International Nuclear Information System (INIS)

Chen, F.-K.; Chang, C.-K.

2005-01-01

In the present study, the stamping process for manufacturing cell phone cases with magnesium alloy AZ31 sheets was studied using both the experimental approach and the finite element analysis. In order to determine the proper forming temperature and set up a fracture criterion, tensile tests and forming limit tests were first conducted to obtain the mechanical behaviors of AZ31 sheets at various elevated temperatures. The mechanical properties of Z31 sheets obtained from the experiments were then adopted in the finite element analysis to investigate the effects of the process parameters on the formability of the stamping process of cell phone cases. The finite element simulation results revealed that both the fracture and wrinkle defects could not be eliminated at the same time by adjusting blank-holder force or blank size. A drawbead design was then performed using the finite element simulations to determine the size and the location of drawbead required to suppress the wrinkle defect. An optimum stamping process, including die geometry, forming temperature, and blank dimension, was then determined for manufacturing the cell phone cases. The finite element analysis was validated by the good agreement between the simulation results and the experimental data. It confirms that the cell phone cases can be produced with magnesium alloy AZ31 sheet by the stamping process at elevated temperatures

MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

Science.gov (United States)

Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

2014-01-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

Science.gov (United States)

Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

2013-12-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

International Nuclear Information System (INIS)

Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

2012-01-01

We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

49 CFR 238.119 - Rim-stamped straight-plate wheels.

Science.gov (United States)

2010-10-01

... input to the wheel during braking. (b) A rim-stamped straight-plate wheel shall not be used as a... that is periodically tread-braked for a short duration by automatic circuitry for the sole purpose of...

Imprints of the Neolithic mind – clay stamps from the Republic of Macedonia

Directory of Open Access Journals (Sweden)

Goce Naumov

2008-12-01

Full Text Available The presence and unusual structure of clay stamps found in Neolithic settlements often give rise to multiple interpretations to define their character. The small dimensions and specific shape of the stamps suggests that these portable objects were important in the social relations and visual communication between members within the same community and, possibly, more distant communities. The definite patterns distinguishe their function in maintaining the visual traditions of the populations inhabiting southeastern Europe. They had an important role in building the Neolithic image modularity, so that they fitted into the comprehensive decorative structure of Neolithic iconography, and the patterns present on the stamps are related to several aspects of Neolithic material culture from the Balkans and Anatolia. This homogeneity of patterns indicates that they were actively included in the transposition of cognition into visual metaphors.

Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

Science.gov (United States)

Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

2017-04-01

The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

Science.gov (United States)

Gundersen, Craig; Kreider, Brent

2008-01-01

Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

45 CFR 205.25 - Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities.

Science.gov (United States)

2010-10-01

... beneficiaries for food stamps or surplus commodities. 205.25 Section 205.25 Public Welfare Regulations Relating....25 Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities... XVI of the Social Security Act, the State agency shall make the following determinations: (1) The...

The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

Directory of Open Access Journals (Sweden)

Kaadyr-ool A. Bicheldey

2016-09-01

Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

Solid-state superionic stamping with silver iodide-silver metaphosphate glass

International Nuclear Information System (INIS)

Jacobs, K E; Hsu, K H; Han, X; Azeredo, B P; Ferreira, P M; Kumar, A; Fang, N X

2011-01-01

This paper demonstrates and analyzes the new use of the glassy solid electrolyte AgI-AgPO 3 for direct nanopatterning of thin silver films with feature resolutions of 30 nm. AgI-AgPO 3 has a high room temperature ionic conductivity with Ag + as the mobile ion, leading to silver etch/patterning rates of up to 20 nm s -1 at an applied bias of 300 mV. The glass can be melt-processed at temperatures below 200 deg. C, providing a facile and economical pathway for creating large area stamps, including the 25 mm 2 stamps shown in this study. Further, the glass is sufficiently transparent to permit integration with existing tools such as aligners and imprint tools, enabling high overlay registration accuracy and facilitating insertion into multi-step fabrication recipes.

Study of mechanical properties on powdermetalurgy aluminium matrix composites fabricated by stamping or extrusion

International Nuclear Information System (INIS)

Busquets, D.; Gomez, L.; Amigo, V.; Salvador-Moya, M. D.

2005-01-01

We have developed composite materials from AA6061 aluminium alloy powders used as matrix and ceramics powders of boron carbide, silicon carbide and boron nitride, used as reinforcements in 2.5, 5.0, 7.5 and 10% vol. by mechanical mixing and milling in planetary mill at 360 rpm vial velocity for 4 h followed of hot stamping and extrusion process on green compacts. Mechanical properties obtained from tensile tests are influenced by the heat treatment, reinforcement fractions and nature. Moreover, these mechanical characteristic are dependent from the processing route. Optical and Scanning Electron Microscopy analysis revealed the microstructure of materials and let describe the tripartite relation; structure-processing-properties, of the developed materials. (Author) 20 refs

Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao, Jian; Chen, Wei; Xia, Z. Cedric

2005-01-01

Sheet metal stamping processes have been widely implemented in many industries due to its repeatability and productivity. In general, the simulations for a sheet metal forming process involve nonlinearity, complex material behavior and tool-material interaction. Instabilities in terms of tearing and wrinkling are major concerns in many sheet metal stamping processes. In this work, a sheet metal stamping process of a mild steel for a wheelhouse used in automobile industry is studied by using an explicit nonlinear finite element code and incorporating failure analysis (tearing and wrinkling) and design under uncertainty. Margins of tearing and wrinkling are quantitatively defined via stress-based criteria for system-level design. The forming process utilizes drawbeads instead of using the blank holder force to restrain the blank. The main parameters of interest in this work are friction conditions, drawbead configurations, sheet metal properties, and numerical errors. A robust design model is created to conduct a probabilistic design, which is made possible for this complex engineering process via an efficient uncertainty propagation technique. The method called the weighted three-point-based method estimates the statistical characteristics (mean and variance) of the responses of interest (margins of failures), and provide a systematic approach in designing a sheet metal forming process under the framework of design under uncertainty

Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

Science.gov (United States)

Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

2015-01-01

Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

Development and introduction of stamping technique for large-size laterals of NPP pipelines

International Nuclear Information System (INIS)

Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

1984-01-01

The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

A framework for development of an intelligent system for design and manufacturing of stamping dies

International Nuclear Information System (INIS)

Hussein, H M A; Kumar, S

2014-01-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

A framework for development of an intelligent system for design and manufacturing of stamping dies

Science.gov (United States)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

International Nuclear Information System (INIS)

Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

2013-01-01

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

International Nuclear Information System (INIS)

Park, Jongho; Kim, Beomjoon

2016-01-01

Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

design and development of a soap stamping and tableting machine

African Journals Online (AJOL)

2012-07-02

Jul 2, 2012 ... for these two operations. The manual ... chine, the cutting and stamping operations were done at different .... slack side belt tensions Tj were determined as 131.66N and 162.71N for the .... vironmental Management, Vol. 6, No.

Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

Science.gov (United States)

National Women's History Project, Windsor, CA.

This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

Draw-in Map - A Road Map for Simulation-Guided Die Tryout and Stamping Process Control

International Nuclear Information System (INIS)

Wang Chuantao; Zhang, Jimmy J.; Goan, Norman

2005-01-01

Sheet metal forming is a displacement or draw-in controlled manufacturing process in which a flat blank is drawn into die cavity to form an automotive body panel. Draw-in amount is the single most important stamping manufacturing index that controls all forming characteristics (strains, stresses, thinning, etc.), stamping failures (splits, wrinkles, surface distortion, etc.) and line die operations and automations. Draw-in Map is engineered for math-based die developments via advanced stamping simulation technology. Then the Draw-in Map is provided to die makers in plants as a road map for math-guided die tryout in which the die tryout workers follow the engineered tryout conditions and matches the engineered draw-in amount so that the tryout time and cost are greatly reduced, and quality is ensured. The Map can also be used as a math-based trouble-shooting tool to identify the causes of formability problems in stamping production. The engineered Draw-in Map has been applied to all draw die tryout for all GM vehicle programs since 1998. A minimum 50% reduction in both lead-time and cost and significant improvement in panel quality in tryout have been reported. This paper presents the concept and process to apply the engineered Draw-in Map in die tryout

Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates

Energy Technology Data Exchange (ETDEWEB)

Dundar, F. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Department of Materials Science and Engineering, Gebze Institute of Technology (Turkey); Dur, Ender; Koc, M. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Mahabunphachai, S. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); National Metal and Materials Technology Center (MTEC), Pathumthani (Thailand)

2010-06-01

Metallic bipolar plates have several advantages over bipolar plates made from graphite and composites due to their high conductivity, low material and production costs. Moreover, thin bipolar plates are possible with metallic alloys, and hence low fuel cell stack volume and mass are. Among existing fabrication methods for metallic bipolar plates, stamping and hydroforming are seen as prominent approaches for mass production scales. In this study, the effects of important process parameters of these manufacturing processes on the corrosion resistance of metallic bipolar plates made of SS304 were investigated. Specifically, the effects of punch speed, pressure rate, stamping force and hydroforming pressure were studied as they were considered to inevitably affect the bipolar plate micro-channel dimensions, surface topography, and hence the corrosion resistance. Corrosion resistance under real fuel cell conditions was examined using both potentiodynamic and potentiostatic experiments. The majority of the results exhibited a reduction in the corrosion resistance for both stamped and hydroformed plates when compared with non-deformed blank plates of SS304. In addition, it was observed that there exist an optimal process window for punch speed in stamping and the pressure rate in hydroforming to achieve improved corrosion resistance at a faster production rate. (author)

American Society of Mechanical Engineers' N stamp requirements

International Nuclear Information System (INIS)

Row, P.D.

1977-01-01

Incorporated with ASME Section III, Nuclear Power Plant Components, is an Appendix on Quality Assurance Systems which includes provision for ASME surveys. Manufacturers and installers passing the survey successfully receive an N Symbol Stamp and an ASME Certificate of Authorization. An outline is given of the prerequisites for a survey to be scheduled and of the requirements and procedures adopted by the survey team. (U.K.)

Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

Science.gov (United States)

Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

2018-03-01

22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

CERN Multimedia

Patrice Loiez

2004-01-01

'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

Characterization of the interfacial heat transfer coefficient for hot stamping processes

Science.gov (United States)

Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

2016-08-01

In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

..., transfers, takes or gives in exchange, or pledges or gives in pledge, except as authorized in the Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

Directory of Open Access Journals (Sweden)

M. Kumar

2017-01-01

Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

Electronics all-in-one for dummies

CERN Document Server

Ross, Dickon

2013-01-01

Your one-stop UK shop for clear, concise explanations to all the important concepts in electronics and tons of direction for building simple, fun electronic projects. The 8 mini-books in this 1 volume include: Getting Started with ElectronicsWorking with Basic ComponentsWorking with Integrated CircuitsGetting into Alternating CurrentWorking with Radio and InfraredDoing Digital ElectronicsWorking with Basic Stamp ProcessorsBuilding Special Effects With nearly 900 pages of instruction, Electronics All-in-One For Dummies covers all the bases and provides a fascinating hands-on exploration of el

Nanostructured submicron block copolymer dots by sacrificial stamping: a potential preconcentration platform for locally resolved sensing, chemistry and cellular interactions

OpenAIRE

Hou, Peilong; Han, Weijia; Philippi, Michael; Schäfer, Helmut; Steinhart, Martin

2018-01-01

Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto silicon wafers and glass slides. The sacrificial PS-b-P2VP stamps were topographically patterned w...

Size Effect Studies on Tensile Tests for Hot Stamping Steel

Science.gov (United States)

Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

2018-02-01

Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

Experimental Validation for Hot Stamping Process by Using Taguchi Method

Science.gov (United States)

Fawzi Zamri, Mohd; Lim, Syh Kai; Razlan Yusoff, Ahmad

2016-02-01

Due to the demand for reduction in gas emissions, energy saving and producing safer vehicles has driven the development of Ultra High Strength Steel (UHSS) material. To strengthen UHSS material such as boron steel, it needed to undergo a process of hot stamping for heating at certain temperature and time. In this paper, Taguchi method is applied to determine the appropriate parameter of thickness, heating temperature and heating time to achieve optimum strength of boron steel. The experiment is conducted by using flat square shape of hot stamping tool with tensile dog bone as a blank product. Then, the value of tensile strength and hardness is measured as response. The results showed that the lower thickness, higher heating temperature and heating time give the higher strength and hardness for the final product. In conclusion, boron steel blank are able to achieve up to 1200 MPa tensile strength and 650 HV of hardness.

Electro-optic sampling for time resolving relativistic ultrafast electron diffraction

International Nuclear Information System (INIS)

Scoby, C. M.; Musumeci, P.; Moody, J.; Gutierrez, M.; Tran, T.

2009-01-01

The Pegasus laboratory at UCLA features a state-of-the-art electron photoinjector capable of producing ultrashort (<100 fs) high-brightness electron bunches at energies of 3.75 MeV. These beams recently have been used to produce static diffraction patterns from scattering off thin metal foils, and it is foreseen to take advantage of the ultrashort nature of these bunches in future pump-probe time-resolved diffraction studies. In this paper, single shot 2-d electro-optic sampling is presented as a potential technique for time of arrival stamping of electron bunches used for diffraction. Effects of relatively low bunch charge (a few 10's of pC) and modestly relativistic beams are discussed and background compensation techniques to obtain high signal-to-noise ratio are explored. From these preliminary tests, electro-optic sampling is suitable to be a reliable nondestructive time stamping method for relativistic ultrafast electron diffraction at the Pegasus lab.

Stamping, Clapping and Chanting: An Ancient Learning Pathway?

Directory of Open Access Journals (Sweden)

Marion M. Long

2006-04-01

Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models

Science.gov (United States)

Samadian, P.; Parsa, M. H.; Mirzadeh, H.

2015-02-01

Nowadays, the application of kinetics models for predicting microstructures of steels subjected to thermo-mechanical treatments has increased to minimize direct experimentation, which is costly and time consuming. In the current work, the final microstructures of AISI 4140 steel sheets after the hot stamping process were predicted using the Kirkaldy and Li kinetics models combined with new thermodynamically based models in order for the determination of the appropriate process temperatures. In this way, the effect of deformation during hot stamping on the Ae3, Acm, and Ae1 temperatures was considered, and then the equilibrium volume fractions of phases at different temperatures were calculated. Moreover, the ferrite transformation rate equations of the Kirkaldy and Li models were modified by a term proposed by Åkerström to consider the influence of plastic deformation. Results showed that the modified Kirkaldy model is satisfactory for the determination of appropriate austenitization temperatures for the hot stamping process of AISI 4140 steel sheets because of agreeable microstructure predictions in comparison with the experimental observations.

Time stamp technique using a nuclear emulsion multi-stage shifter for gamma-ray telescope

International Nuclear Information System (INIS)

Takahashi, Satoru; Aoki, Shigeki; Rokujo, Hiroki; Hamada, Kaname; Komatsu, Masahiro; Morishima, Kunihiro; Nakamura, Mitsuhiro; Nakano, Toshiyuki; Niwa, Kimio; Sato, Osamu; Yoshioka, Teppei; Kodama, Koichi

2010-01-01

Nuclear emulsion has a potential use as a gamma-ray telescope with high angular resolution. For this application it is necessary to know the time when each track was recorded in the emulsion. In previous experiments using nuclear emulsion, various efforts were used to associate time to nuclear emulsion tracks and to improve the time resolution. Using a high speed readout system for nuclear emulsion together with a clock-based multi-stage emulsion shifter, we invented a technique to give a time-stamp to emulsion tracks and greatly improve the time resolution. A test experiment with a 2-stage shifter was used to demonstrate the principle of multi-stage shifting, and we achieved a time resolution 1.5 s for 12.1 h (about 1 part in 29 000) with the time stamp reliability 97% and the time stamp efficiency 98%. This multi-stage shifter can achieve the time resolution required for a gamma-ray telescope and can also be applied to another cosmic ray observations and accelerator experiments using nuclear emulsion.

Fabrication of a Ni nano-imprint stamp for an anti-reflective layer using an anodic aluminum oxide template.

Science.gov (United States)

Park, Eun-Mi; Lim, Seung-Kyu; Ra, Senug-Hyun; Suh, Su-Jung

2013-11-01

Aluminum anodizing can alter pore diameter, density distribution, periodicity and layer thickness in a controlled way. Because of this property, porous type anodic aluminum oxide (AAO) was used as a template for nano-structure fabrication. The alumina layer generated at a constant voltage increased the pore size from 120 nm to 205 nm according to an increasing process time from 60 min to 150 min. The resulting fabricated AAO templates had pore diameters at or less than 200 nm. Ni was sputtered as a conductive layer onto this AAO template and electroplated using DC and pulse power. Comparing these Ni stamps, those generated from electroplating using on/reverse/off pulsing had an ordered pillar array and maintained the AAO template morphology. This stamp was used for nano-imprinting on UV curable resin coated glass wafer. Surface observations via electron microscopy showed that the nano-imprinted patterned had the same shape as the AAO template. A soft mold was subsequently fabricated and nano-imprinted to form a moth-eye structure on the glass wafer. An analysis of the substrate transmittance using UV-VIS/NIR spectroscopy showed that the transmittance of the substrate with the moth-eye structure was 5% greater that the non-patterned substrate.

Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

International Nuclear Information System (INIS)

Zhang Fengxiang; Low, Hong Yee

2008-01-01

Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

Stochastic analysis and robust optimization for a deck lid inner panel stamping

International Nuclear Information System (INIS)

Hou, Bo; Wang, Wurong; Li, Shuhui; Lin, Zhongqin; Xia, Z. Cedric

2010-01-01

FE-simulation and optimization are widely used in the stamping process to improve design quality and shorten development cycle. However, the current simulation and optimization may lead to non-robust results due to not considering the variation of material and process parameters. In this study, a novel stochastic analysis and robust optimization approach is proposed to improve the stamping robustness, where the uncertainties are involved to reflect manufacturing reality. A meta-model based stochastic analysis method is developed, where FE-simulation, uniform design and response surface methodology (RSM) are used to construct meta-model, based on which Monte-Carlo simulation is performed to predict the influence of input parameters variation on the final product quality. By applying the stochastic analysis, uniform design and RSM, the mean and the standard deviation (SD) of product quality are calculated as functions of the controllable process parameters. The robust optimization model composed of mean and SD is constructed and solved, the result of which is compared with the deterministic one to show its advantages. It is demonstrated that the product quality variations are reduced significantly, and quality targets (reject rate) are achieved under the robust optimal solution. The developed approach offers rapid and reliable results for engineers to deal with potential stamping problems during the early phase of product and tooling design, saving more time and resources.

Causal Analysis to a Subway Accident: A Comparison of STAMP and RAIB

Directory of Open Access Journals (Sweden)

Zhou Yao

2018-01-01

Full Text Available Accident investigation and analysis after the accident, vital to prevent the occurrence of similar accident and improve the safety of the system. Different methods led to a different understanding of the accident. In this paper, a subway accident was analysed with a systemic accident analysis model – STAMP (System-Theoretic Accident Modelling and Processes. The hierarchical safety control structure was obtained, and the system-level safety constraints were obtained, controllers of the physical layer were analysed one by one, and put forward the relevant safety requirements and constraints, the dynamic analysis of the structure of the safety control is carried out, and the targeted recommendations are pointed out. In comparison with the analysis results obtained by the Rail Accident Investigation Branch (RAIB. Some useful findings have been concluded. STAMP treats safety as a control problem and reduces or eliminates causes of the accident from the controlling perspective. Whereas RAIB obtains causes of the accident by analysing the sequence of events related to the accident and reasons of these events, then chooses one(or moreevent(s as the immediate cause and some of the key events as causal factors. RAIB analysis is based on the sequential event models, but STAMP analysis provides us with a holistic, dynamic way to control system to maintain safety.

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

International Nuclear Information System (INIS)

Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

2015-01-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

Energy Technology Data Exchange (ETDEWEB)

Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

2015-07-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Directory of Open Access Journals (Sweden)

Aizawa Tatsuhiko

2016-01-01

Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

International Nuclear Information System (INIS)

Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

2007-01-01

It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

Donor-derived infections among Chinese donation after cardiac death liver recipients.

Science.gov (United States)

Ye, Qi-Fa; Zhou, Wei; Wan, Qi-Quan

2017-08-21

To investigate blood cultures of deceased donors and report the confirmed transmission of bacterial infection from donors to liver recipients. We retrospectively studied the results of blood cultures among our donation after cardiac death (DCD) donors and calculated the donor-derived bacterial infection rates among liver recipients. Study participants underwent liver transplantation between January 1, 2010 and February 1, 2017. The study involved a total of 67 recipients of liver grafts from 67 DCD donors. We extracted the data of donors' and patients' characteristics, culture results and clinical outcomes, especially the post-transplant complications in liver recipients, from electronic medical records. We analyzed the characteristics of the donors and the corresponding liver recipients with emphasis put on donor-derived infections. Head trauma was the most common origin of death among our 67 DCD donors (46.3%). Blood taken prior to the procurement operation was cultured for 53 of the donors, with 17 episodes of bloodstream infections developing from 13 donors. The predominant organism isolated from the blood of donors was Gram-positive bacteria (70.6%). Only three (4.5%) of 67 liver recipients developed confirmed donor-derived bacterial infections, with two isolates of multidrug-resistant Klebsiella pneumoniae and one isolate of multidrug-resistant Enterobacter aerogenes. The liver recipients with donor-derived infections showed relation to higher crude mortality and graft loss rates (33.3% each) within 3 mo post transplantation, as compared to those without donor-derived infections (9.4% and 4.7%, respectively). All three liver recipients received appropriate antimicrobial therapy. Liver recipients have high occurrence of donor-derived infections. The liver recipients with donor-derived multidrug-resistant Enterobacteriaceae infections can have good outcome if appropriate antimicrobial therapy is given.

Disruption of Ttll5/stamp gene (tubulin tyrosine ligase-like protein 5/SRC-1 and TIF2-associated modulatory protein gene) in male mice causes sperm malformation and infertility.

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S; Guo, Chunhua; Blackford, John A; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P; London, Edra C; Chen, Weiping; Dean, Jurrien; Simons, S Stoney

2013-05-24

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamp(tm/tm)) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamp(tm/tm) sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamp(tm/tm) males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility.

Studying the Solar System Can Be More than Just "Stamp Collecting"

Science.gov (United States)

LoPresto, Michael C.

2017-01-01

While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

STAMPS: development and verification of swallowing kinematic analysis software.

Science.gov (United States)

Lee, Woo Hyung; Chun, Changmook; Seo, Han Gil; Lee, Seung Hak; Oh, Byung-Mo

2017-10-17

Swallowing impairment is a common complication in various geriatric and neurodegenerative diseases. Swallowing kinematic analysis is essential to quantitatively evaluate the swallowing motion of the oropharyngeal structures. This study aims to develop a novel swallowing kinematic analysis software, called spatio-temporal analyzer for motion and physiologic study (STAMPS), and verify its validity and reliability. STAMPS was developed in MATLAB, which is one of the most popular platforms for biomedical analysis. This software was constructed to acquire, process, and analyze the data of swallowing motion. The target of swallowing structures includes bony structures (hyoid bone, mandible, maxilla, and cervical vertebral bodies), cartilages (epiglottis and arytenoid), soft tissues (larynx and upper esophageal sphincter), and food bolus. Numerous functions are available for the spatiotemporal parameters of the swallowing structures. Testing for validity and reliability was performed in 10 dysphagia patients with diverse etiologies and using the instrumental swallowing model which was designed to mimic the motion of the hyoid bone and the epiglottis. The intra- and inter-rater reliability tests showed excellent agreement for displacement and moderate to excellent agreement for velocity. The Pearson correlation coefficients between the measured and instrumental reference values were nearly 1.00 (P software is expected to be useful for researchers who are interested in the swallowing motion analysis.

Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

Directory of Open Access Journals (Sweden)

Orłowicz A.W.

2016-06-01

Full Text Available The paper presents results of assessment of the unit pressure force within the refractory material volume in the course press-moulding of stampings for refractory precast shapes. The force was evaluated with the use of physical simulation of deformation undergone by lead balls placed in the raw refractory mass subjected to pressing in a metal die. To determine the value of unit pressure force applied to the aggregate grains in the course of stamping press-moulding, physical model of deformation of a sphere induced by the uniaxial stress state was used.

Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients.

Science.gov (United States)

Koefoed-Nielsen, P; Weinreich, I; Bengtsson, M; Lauronen, J; Naper, C; Gäbel, M; Sørensen, S S; Wennberg, L; Reisaeter, A V; Møller, B K

2017-07-01

Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program (STAMP), a de-centralized approach has been implemented in 2009. The program has been improved during the years from utilizing HLA-A, -B, -DR matching only to include typing of all deceased donors for HLA-A, -B, -C, -DRB1 and -DQB1. The calculation of a transplantability score (TS) has been introduced in order to take both HLA and AB0 into consideration resulting in a more realistic picture of the transplantability chance. Patients were selected for eligibility and results of immunisation status were prepared in each of the 9 tissue typing laboratories, while access to the program is finally governed by a common steering group of immunologists and clinicians. In the period from March 2009 until February 2015, 96 patients were transplanted within this program. The mean recipient age was 49 years and 57% were females, 30% of the patients were first transplants and of these 93% were females. The majority of the patients had 2-5 HLA-A, -B. -DR mismatches. The allograft survival at 60 months was 79.1%. Applying the TS to the cohort confirmed that patients with a low TS score had longer waiting times. The program has matured during the years and now proves to be a valid approach for transplanting highly immunized patients. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

NARCIS (Netherlands)

Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

2007-01-01

The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

Cost-benefit analysis of providing a special subsistence allowance to military personnel who qualify for food stamps

OpenAIRE

Becker, Curtis A., Jr.

2000-01-01

Approved for public release, distribution is unlimited Recent reports cite that military Food Stamp Program beneficiaries may range from 6,400 to 20,000. The need for food stamps has been attributed to several factors, one of which is the perceived military "pay gap". Although, significant strides have been made in recent years to improve quality of life for our service men and women and their families, the military pay system tends to lag behind the civilian employment cost growth index. ...

A burial with a stamp seal depicting a Bes-like figure from Abusir

Czech Academy of Sciences Publication Activity Database

Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

2015-01-01

Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

7 CFR 278.2 - Participation of retail food stores.

Science.gov (United States)

2010-01-01

... of the foods used in meals shall also be excluded. In addition, if others have the option of eating free or making a monetary donation, food stamp recipients must be provided the same option of eating... coupons. (f) Paying credit accounts. Food stamp benefits shall not be accepted by an authorized retail...

Over, under, or about right: misperceptions of body weight among food stamp participants.

Science.gov (United States)

Ver Ploeg, Michele L; Chang, Hung-Hao; Lin, Biing-Hwan

2008-09-01

The purpose of this research was to investigate the associations between misperception of body weight and sociodemographic factors such as food stamp participation status, income, education, and race/ethnicity. National Health and Nutrition Examination Survey (NHANES) data from 1999-2004 and multivariate logistic regression are used to estimate how sociodemographic factors are associated with (i) the probability that overweight adults misperceive themselves as healthy weight; (ii) the probability that healthy-weight adults misperceive themselves as underweight; and (iii) the probability that healthy-weight adults misperceive themselves as overweight. NHANES data are representative of the US civilian noninstitutionalized population. The analysis included 4,362 men and 4,057 women. BMI derived from measured weight and height was used to classify individuals as healthy weight or overweight. These classifications were compared with self-reported categorical weight status. We find that differences across sociodemographic characteristics in the propensity to underestimate or overestimate weight status were more pronounced for women than for men. Overweight female food stamp participants were more likely to underestimate weight status than income-eligible nonparticipants. Among healthy-weight and overweight women, non-Hispanic black and Mexican-American women, and women with less education were more likely to underestimate actual weight status. We found few differences across sociodemographic characteristics for men. Misperceptions of weight are common among both overweight and healthy-weight individuals and vary across socioeconomic and demographic groups. The nutrition education component of the Food Stamp Program could increase awareness of healthy body weight among participants.

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

Science.gov (United States)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

Science.gov (United States)

Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

2017-11-08

A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

Science.gov (United States)

Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

2002-01-01

The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

International Nuclear Information System (INIS)

Veit, R.; Kolleck, R.; Hofmann, H.; Sikora, S.

2011-01-01

Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating.In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

Studies on the finite element simulation in sheet metal stamping processes

Science.gov (United States)

Huang, Ying

The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

From Welfare to Work: The Endorsement of the Money Ethic and the Work Ethic among Welfare Recipients, Welfare Recipients in Training Programs, and Employed Past Welfare Recipients.

Science.gov (United States)

Tang, Thomas Li-Ping; Smith-Brandon, Vancie L.

2001-01-01

Work-related attitudes of 164 welfare recipients, 159 recipients in job training, and 158 employed former recipients were compared. Those employed had the highest scores in money ethic, work ethic, and self-esteem; higher education and income; and longer job tenure. Recipients not in training had the least positive money and work ethic. (Contains…

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-04-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-06-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms

Science.gov (United States)

Dufour, Clément; Wang, Peng; Boussu, François; Soulat, Damien

2014-10-01

Forming of continuous fibre reinforcements and thermoplastic resin commingled prepregs can be performed at room temperature due to its similar textile structure. The "cool" forming stage is better controlled and more economical. The increase of temperature and the resin consolidation phases after the forming can be carried out under the isothermal condition thanks to a closed system. It can avoid the manufacturing defects easily experienced in the non-isothermal thermoforming, in particular the wrinkling [1]. Glass/Polypropylene commingled yarns have been woven inside different three-dimensional (3D) warp interlock fabrics and then formed using a double-curved shape stamping tool. The present study investigates the in-plane and through-thickness behaviour of the 3D warp interlock fibrous reinforcements during forming with a hemispherical punch. Experimental data allow analysing the forming behaviour in the warp and weft directions and on the influence of warp interlock architectures. The results point out that the layer to layer warp interlock preform has a better stamping behaviour, in particular no forming defects and good homogeneity in thickness.

The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

Science.gov (United States)

Shao, Z.; Li, N.; Lin, J.

2017-09-01

The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

Ben Franklin, America’s Postage Stamp Star — on the Wane?

Directory of Open Access Journals (Sweden)

François Brunet

2010-01-01

Full Text Available This paper is an assessment of Ben Franklin’s evolving figure in U.S. postage stamps, focusing especially on the contrast between the 2006 tercentennial Franklin 4-stamp panel, a rather high-brow representation of Franklin as an intellectual, and his traditional image as a homely, common face. The singular history of U.S. postage stamps, with their innovative choice of historical figures as subject matter and their broader emphasis on commemoration, is briefly summarized. The evolution of the Franklin figure — the most common postal image, along with George Washington — is then detailed, showing how the traditional image prevailed until the 1950s, before being progressively displaced by a more cultural and, lately, intellectual image of the nation’s “electrizer”.Cet article vise à interpréter l’évolution de la figure de Benjamin Franklin dans les timbres-poste des Etats-Unis, en se fondant notamment sur le contraste entre le bloc de quatre timbres émis lors du tricentenaire en 2006, qui représente Franklin dans les différents métiers d’un intellectuel des Lumières, et son image traditionnelle d’Américain simple et moyen. On retrace tout d’abord l’histoire singulière des timbres américains, caractérisée par le choix innovant de figures historiques comme sujets et plus généralement par la prééminence de la fonction commémorative. Puis on étudie en détail l’évolution de la figure de Franklin — sujet le plus fréquent des timbres américains avec George Washington — en montrant que l’image traditionnelle s’est perpétuée jusqu’aux années 1950, avant de céder progressivement à une image plus culturelle et, récemment, plus intellectuelle.

Influence of temperature and friction on the 22MnB5 formability under hot stamping conditions

Science.gov (United States)

Venturato, G.; Ghiotti, A.; Bruschi, S.

2018-05-01

The need to increase the safety and decrease the weight of the car body-in-white has determined the success of the direct hot stamping process as a primary technology for the automotive sector. Thanks to this process, parts with high strength-to-weight ratio can be obtained along with high stiffness and increase of the crashworthiness properties. Moreover, the thinner metal sheets used to manufacture the pieces lead to a decrease of the total weight of the car body-in-white, with a consequent reduction of the CO2 emissions. The direct hot stamping process is becoming the key to obtain pieces with high mechanical properties, thanks to the quenching stage that allows the manufacture of complex shapes characterized by a fully martensitic structure, thanks to the forming stage at elevated temperature and subsequent hardening inside the cooled dies. The aim of this paper is the investigation of the influence that the forming temperature may have on the formability of 22MnB5 steel sheets, commonly used in the hot stamping process of automotive components. Nakajima tests were carried out at different temperatures and the Forming Limit Diagrams (FLDs) at rupture were obtained and analysed. The temperature influenced both the major and the minor strain at which the sheet failed, indicating that not only the formability increased at increasing temperature, but there was also a modification of the strain path, which means a modification of the strain states through which the part passes during the deformation process. Moreover, the influence of friction is studied using a model developed in the LS-Dyna FEM environment. The obtained data are of great importance for an accurate calibration of Finite Element (FE) models of the hot stamping of real components in order to get optimal process parameters to obtain defects-free pieces.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

OpenAIRE

Pasquale Russo Spena

2017-01-01

This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

Tribological behavior of a new green industrial lubricant for stamping operations - Application to Stainless Steels

Science.gov (United States)

Buteri, A.; Borgeot, M.; Roizard, X.; Lallemand, F.; Melot, J.-M.; Morand, L.

2016-11-01

Thanks to a fruitful collaboration between different academic and industrial research entities, a new green lubricant solution AFULudine has been developed for stamping operations in substitution to the usual mineral oils, with the idea and the wish to combine different essential properties such as a low environmental impact and ease-of-use according to the market needs and the more and more restrictive environmental legislation (e.g. REACH). Based on the Self-Assembled-Monolayer (SAM) principle and so, on a perfect control of the chemical reaction between the solution and the substrate (grafting of molecules onto the surface), AFULudine offers an efficient technical answer for improving stamping processes. The present study, focused on stainless steel stampings (comparison between a 441-1.4509 grade and a 304-1.4301 grade), investigates the performances of this new green industrial lubricant at different levels: from laboratory tests to industrial conditions through the production of hundreds of parts. Additional results coming from tests made on a rotational pin- on-disk tribometer will allow us to appreciate and retrieve more local information about the tribofilm creation during sliding. Moreover, the comparison with different mineral oils currently used at industrial scale, will strengthen the AFULudine performances. Indeed, this new solution usually outperforms a majority of such oils whatever their viscosity and their own composition: formulation, content of extreme pressure additives (Cl, S, P)...

Disruption of Ttll5/Stamp Gene (Tubulin Tyrosine Ligase-like Protein 5/SRC-1 and TIF2-associated Modulatory Protein Gene) in Male Mice Causes Sperm Malformation and Infertility*

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J.; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S.; Guo, Chunhua; Blackford, John A.; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P.; London, Edra C.; Chen, Weiping; Dean, Jurrien; Simons, S. Stoney

2013-01-01

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamptm/tm) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamptm/tm sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamptm/tm males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility. PMID:23558686

Authentication, Time-Stamping and Digital Signatures

Science.gov (United States)

Levine, Judah

1996-01-01

Time and frequency data are often transmitted over public packet-switched networks, and the use of this mode of distribution is likely to increase in the near future as high-speed logical circuits transmitted via networks replace point-to-point physical circuits. ALthough these networks have many technical advantages, they are susceptible to evesdropping, spoofing, and the alteration of messages enroute using techniques that are relatively simple to implement and quite difficult to detect. I will discuss a number of solutions to these problems, including the authentication mechanism used in the Network Time Protocol (NTP) and the more general technique of signing time-stamps using public key cryptography. This public key method can also be used to implement the digital analog of a Notary Public, and I will discuss how such a system could be realized on a public network such as the Internet.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

Directory of Open Access Journals (Sweden)

Pasquale Russo Spena

2017-10-01

Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

Protocol for a national blood transfusion data warehouse from donor to recipient

Science.gov (United States)

van Hoeven, Loan R; Hooftman, Babette H; Janssen, Mart P; de Bruijne, Martine C; de Vooght, Karen M K; Kemper, Peter; Koopman, Maria M W

2016-01-01

Introduction Blood transfusion has health-related, economical and safety implications. In order to optimise the transfusion chain, comprehensive research data are needed. The Dutch Transfusion Data warehouse (DTD) project aims to establish a data warehouse where data from donors and transfusion recipients are linked. This paper describes the design of the data warehouse, challenges and illustrative applications. Study design and methods Quantitative data on blood donors (eg, age, blood group, antibodies) and products (type of product, processing, storage time) are obtained from the national blood bank. These are linked to data on the transfusion recipients (eg, transfusions administered, patient diagnosis, surgical procedures, laboratory parameters), which are extracted from hospital electronic health records. Applications Expected scientific contributions are illustrated for 4 applications: determine risk factors, predict blood use, benchmark blood use and optimise process efficiency. For each application, examples of research questions are given and analyses planned. Conclusions The DTD project aims to build a national, continuously updated transfusion data warehouse. These data have a wide range of applications, on the donor/production side, recipient studies on blood usage and benchmarking and donor–recipient studies, which ultimately can contribute to the efficiency and safety of blood transfusion. PMID:27491665

Can Food Stamps Do More to Improve Food Choices? An Economic Perspective--Making Healthy Food Choices Easier: Ideas From Behavioral Economics

OpenAIRE

Mancino, Lisa; Andrews, Margaret S.

2007-01-01

With obesity the most prevalent nutrition problem facing Americans at all economic levels, promoting diets that provide adequate nutrition without too many calories has become an important objective for the Food Stamp Program. Findings from behavioral economics suggest innovative, low-cost ways to improve the diet quality of food stamp participants without restricting their freedom of choice. Unlike more traditional economic interventions, such as changing prices or banning specific foods, th...

Extracting Hot spots of Topics from Time Stamped Documents

Science.gov (United States)

Chen, Wei; Chundi, Parvathi

2011-01-01

Identifying time periods with a burst of activities related to a topic has been an important problem in analyzing time-stamped documents. In this paper, we propose an approach to extract a hot spot of a given topic in a time-stamped document set. Topics can be basic, containing a simple list of keywords, or complex. Logical relationships such as and, or, and not are used to build complex topics from basic topics. A concept of presence measure of a topic based on fuzzy set theory is introduced to compute the amount of information related to the topic in the document set. Each interval in the time period of the document set is associated with a numeric value which we call the discrepancy score. A high discrepancy score indicates that the documents in the time interval are more focused on the topic than those outside of the time interval. A hot spot of a given topic is defined as a time interval with the highest discrepancy score. We first describe a naive implementation for extracting hot spots. We then construct an algorithm called EHE (Efficient Hot Spot Extraction) using several efficient strategies to improve performance. We also introduce the notion of a topic DAG to facilitate an efficient computation of presence measures of complex topics. The proposed approach is illustrated by several experiments on a subset of the TDT-Pilot Corpus and DBLP conference data set. The experiments show that the proposed EHE algorithm significantly outperforms the naive one, and the extracted hot spots of given topics are meaningful. PMID:21765568

Rubber stamp templates for improving clinical documentation: A paper-based, m-Health approach for quality improvement in low-resource settings.

Science.gov (United States)

Kleczka, Bernadette; Musiega, Anita; Rabut, Grace; Wekesa, Phoebe; Mwaniki, Paul; Marx, Michael; Kumar, Pratap

2018-06-01

The United Nations' Sustainable Development Goal #3.8 targets 'access to quality essential healthcare services'. Clinical practice guidelines are an important tool for ensuring quality of clinical care, but many challenges prevent their use in low-resource settings. Monitoring the use of guidelines relies on cumbersome clinical audits of paper records, and electronic systems face financial and other limitations. Here we describe a unique approach to generating digital data from paper using guideline-based templates, rubber stamps and mobile phones. The Guidelines Adherence in Slums Project targeted ten private sector primary healthcare clinics serving informal settlements in Nairobi, Kenya. Each clinic was provided with rubber stamp templates to support documentation and management of commonly encountered outpatient conditions. Participatory design methods were used to customize templates to the workflows and infrastructure of each clinic. Rubber stamps were used to print templates into paper charts, providing clinicians with checklists for use during consultations. Templates used bubble format data entry, which could be digitized from images taken on mobile phones. Besides rubber stamp templates, the intervention included booklets of guideline compilations, one Android phone for digitizing images of templates, and one data feedback/continuing medical education session per clinic each month. In this paper we focus on the effect of the intervention on documentation of three non-communicable diseases in one clinic. Seventy charts of patients enrolled in the chronic disease program (hypertension/diabetes, n=867; chronic respiratory diseases, n=223) at one of the ten intervention clinics were sampled. Documentation of each individual patient encounter in the pre-intervention (January-March 2016) and post-intervention period (May-July) was scored for information in four dimensions - general data, patient assessment, testing, and management. Control criteria included

Marrow transfusions into normal recipients

International Nuclear Information System (INIS)

Brecher, G.

1983-01-01

During the past several years we have explored the transfusion of bone marrow into normal nonirradiated mice. While transfused marrow proliferates readily in irradiated animals, only minimal proliferation takes place in nonirradiated recipients. It has generally been assumed that this was due to the lack of available proliferative sites in recipients with normal marrow. Last year we were able to report that the transfusion of 200 million bone marrow cells (about 2/3 of the total complement of marrow cells of a normal mouse) resulted in 20% to 25% of the recipient's marrow being replaced by donor marrow. Thus we can now study the behavior of animals that have been transfused (donor) and endogenous (recipient) marrow cells, although none of the tissues of either donor or recipient have been irradiated. With these animals we hope to investigate the nature of the peculiar phenomenon of serial exhaustion of marrow, also referred to as the limited self-replicability of stem cells

High-performance electronics for time-of-flight PET systems

International Nuclear Information System (INIS)

Choong, W-S; Peng, Q; Vu, C Q; Turko, B T; Moses, W W

2013-01-01

We have designed and built a high-performance readout electronics system for time-of-flight positron emission tomography (TOF PET) cameras. The electronics architecture is based on the electronics for a commercial whole-body PET camera (Siemens/CPS Cardinal electronics), modified to improve the timing performance. The fundamental contributions in the electronics that can limit the timing resolution include the constant fraction discriminator (CFD), which converts the analog electrical signal from the photo-detector to a digital signal whose leading edge is time-correlated with the input signal, and the time-to-digital converter (TDC), which provides a time stamp for the CFD output. Coincident events are identified by digitally comparing the values of the time stamps. In the Cardinal electronics, the front-end processing electronics are performed by an Analog subsection board, which has two application-specific integrated circuits (ASICs), each servicing a PET block detector module. The ASIC has a built-in CFD and TDC. We found that a significant degradation in the timing resolution comes from the ASIC's CFD and TDC. Therefore, we have designed and built an improved Analog subsection board that replaces the ASIC's CFD and TDC with a high-performance CFD (made with discrete components) and TDC (using the CERN high-performance TDC ASIC). The improved Analog subsection board is used in a custom single-ring LSO-based TOF PET camera. The electronics system achieves a timing resolution of 60 ps FWHM. Prototype TOF detector modules are read out with the electronics system and give coincidence timing resolutions of 259 ps FWHM and 156 ps FWHM for detector modules coupled to LSO and LaBr 3 crystals respectively.

A Path-Independent Forming Limit Criterion for Stamping Simulations

International Nuclear Information System (INIS)

Zhu Xinhai; Chappuis, Laurent; Xia, Z. Cedric

2005-01-01

Forming Limit Diagram (FLD) has been proved to be a powerful tool for assessing necking failures in sheet metal forming analysis for majority of stamping operations over the last three decades. However, experimental evidence and theoretical analysis suggest that its applications are limited to linear or almost linear strain paths during its deformation history. Abrupt changes or even gradual deviations from linear strain-paths will shift forming limit curves from their original values, a situation that occurs in vast majority of sequential stamping operations such as where the drawing process is followed by flanging and re-strike processes. Various forming limit models have been put forward recently to provide remedies for the problem, noticeably stress-based and strain gradient-based forming limit criteria. This study presents an alternative path-independent forming limit criterion. Instead of traditional Forming Limit Diagrams (FLD) which are constructed in terms of major - minor principal strains throughout deformation history, the new criterion defines a critical effective strain ε-bar* as the limit strain for necking, and it is shown that ε-bar* can be expressed as a function of current strain rate state and material work hardening properties, without the need of explicitly considering strain-path effects. It is given by ε-bar* = f(β, k, n) where β = (dε 2 /dε 1 ) at current deformation state, and k and n are material strain hardening parameters if a power law is assumed. The analysis is built upon previous work by Storen and Rice [1975] and Zhu et al [2002] with the incorporation of anisotropic yield models such as Hill'48 for quadratic orthotropic yield and Hill'79 for non-quadratic orthotropic yield. Effects of anisotropic parameters such as R-values and exponent n-values on necking are investigated in detail for a variety of strain paths. Results predicted according to current analysis are compared against experimental data gathered from literature

78 FR 60304 - Information Collection Request Sent to the Office of Management and Budget (OMB) for Approval...

Science.gov (United States)

2013-10-01

...; Electronic Duck Stamp Program AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice; request for... and products that bear stamp images are also popular collector items. The Electronic Duck Stamp Act of... issuance of an electronic stamp. Description of the process the State will use to account for and transfer...

Effects of Pre-Strain on the Aging Behavior of Al 7075 Alloy for Hot-Stamping Capability

Directory of Open Access Journals (Sweden)

Seon-Ho Jung

2018-02-01

Full Text Available The present study investigates the significance of pre-strain on the T6 aging behavior of an Al 7075 alloy for evaluating the applicability of hot stamping. In practice, the alloy was pre-strained up to 15% during solution heat treatment at 480 °C prior to quenching, and artificial aging was conducted at 120 °C. The peak aging time and precipitation behavior were compared with the alloy with pre-straining at room temperature after quenching but immediately before the artificial aging. The results showed that increasing amounts of pre-strain tend to reduce the aging time up to 50% for achieving peak hardness, which is consistent with the alloy at the T6 condition. There is a limitation for the maximum attainable amount of pre-strain of 10% for the homogeneous distribution of strain when the alloy is strained at room temperature (RT due to the low formability. The pre-strained alloy as hot stamping exhibited lowering of the peak reaction temperatures for dissolution and formation of Guinier–Preston (GP-Zones and precipitated with increasing amounts of pre-strain towards 15% through the differential scanning calorimetry analysis, thereby confirming the shortening of the peak aging time. The present study confirms the excellent potential of the hot-stamping process to extend the capability of an Al 7075 alloy.

Comparison of the methods for calculating the interfacial heat transfer coefficient in hot stamping

International Nuclear Information System (INIS)

Zhao, Kunmin; Wang, Bin; Chang, Ying; Tang, Xinghui; Yan, Jianwen

2015-01-01

This paper presents a hot stamping experimentation and three methods for calculating the Interfacial Heat Transfer Coefficient (IHTC) of 22MnB5 boron steel. Comparison of the calculation results shows an average error of 7.5% for the heat balance method, 3.7% for the Beck's nonlinear inverse estimation method (the Beck's method), and 10.3% for the finite-element-analysis-based optimization method (the FEA method). The Beck's method is a robust and accurate method for identifying the IHTC in hot stamping applications. The numerical simulation using the IHTC identified by the Beck's method can predict the temperature field with a high accuracy. - Highlights: • A theoretical formula was derived for direct calculation of IHTC. • The Beck's method is a robust and accurate method for identifying IHTC. • Finite element method can be used to identify an overall equivalent IHTC

The National Heart, Lung, and Blood Institute Recipient Epidemiology and Donor Evaluation Study (REDS-III): A research program striving to improve blood donor and transfusion recipient outcomes

Science.gov (United States)

Kleinman, Steven; Busch, Michael P; Murphy, Edward L; Shan, Hua; Ness, Paul; Glynn, Simone A.

2014-01-01

Background The Recipient Epidemiology and Donor Evaluation Study -III (REDS-III) is a 7-year multicenter transfusion safety research initiative launched in 2011 by the National Heart, Lung, and Blood Institute. Study design The domestic component involves 4 blood centers, 12 hospitals, a data coordinating center, and a central laboratory. The international component consists of distinct programs in Brazil, China, and South Africa which involve US and in-country investigators. Results REDS-III is using two major methods to address key research priorities in blood banking/transfusion medicine. First, there will be numerous analyses of large “core” databases; the international programs have each constructed a donor/donation database while the domestic program has established a detailed research database that links data from blood donors and their donations, the components made from these donations, and data extracts from the electronic medical records of the recipients of these components. Secondly, there are more than 25 focused research protocols involving transfusion recipients, blood donors, or both that are either in progress or scheduled to begin within the next 3 years. Areas of study include transfusion epidemiology and blood utilization; transfusion outcomes; non-infectious transfusion risks; HIV-related safety issues (particularly in the international programs); emerging infectious agents; blood component quality; donor health and safety; and other donor issues. Conclusions It is intended that REDS-III serve as an impetus for more widespread recipient and linked donor-recipient research in the US as well as to help assure a safe and available blood supply in the US and in international locations. PMID:24188564

Viral infections in transplant recipients.

Science.gov (United States)

Razonable, R R; Eid, A J

2009-12-01

Solid organ and hematopoietic stem cell transplant recipients are uniquely predisposed to develop clinical illness, often with increased severity, due to a variety of common and opportunistic viruses. Patients may acquire viral infections from the donor (donor-derived infections), from reactivation of endogenous latent virus, or from the community. Herpes viruses, most notably cytomegalovirus and Epstein Barr virus, are the most common among opportunistic viral pathogens that cause infection after solid organ and hematopoietic stem cell transplantation. The polyoma BK virus causes opportunistic clinical syndromes predominantly in kidney and allogeneic hematopoietic stem cell transplant recipients. The agents of viral hepatitis B and C present unique challenges particularly among liver transplant recipients. Respiratory viral illnesses due to influenza, respiratory syncytial virus, and parainfluenza virus may affect all types of transplant recipients, although severe clinical disease is observed more commonly among lung and allogeneic hematopoietic stem cell transplant recipients. Less common viral infections affecting transplant recipients include those caused by adenoviruses, parvovirus B19, and West Nile virus. Treatment for viruses with proven effective antiviral drug therapies should be complemented by reduction in the degree of immunosuppression. For others with no proven antiviral drugs for therapy, reduction in the degree of immunosuppression remains as the sole effective strategy for management. Prevention of viral infections is therefore of utmost importance, and this may be accomplished through vaccination, antiviral strategies, and aggressive infection control measures.

Titanium nitride stamps replicating nanoporous anodic alumina films

International Nuclear Information System (INIS)

Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

2007-01-01

Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

Development of Core Competencies for Paraprofessional Nutrition Educators Who Deliver Food Stamp Nutrition Education

Science.gov (United States)

Baker, Susan S.; Pearson, Meredith; Chipman, Helen

2009-01-01

The purpose of this project was to describe the process used for the development of core competencies for paraprofessional nutrition educators in Food Stamp Nutrition Education (FSNE). The development process included the efforts of an expert panel of state and multicounty FSNE leaders to draft the core competencies and the validation of those…

Skin Cancer Risk in Hematopoietic Stem-Cell Transplant Recipients Compared With Background Population and Renal Transplant Recipients

DEFF Research Database (Denmark)

Omland, Silje Haukali; Gniadecki, Robert; Hædersdal, Merete

2016-01-01

IMPORTANCE: While a high risk of nonmelanoma skin cancer is well recognized in solid-organ transplant recipients, the risk of skin cancer in hematopoietic stem-cell transplant (HSCT) recipients has not been extensively studied. OBJECTIVE: To determine the risk of cutaneous cancer in HSCT recipients...... autologous) from 1999 through 2014, 4789 RTRs from 1976 through 2014, and 10 age- and sex-matched nontransplanted individuals for each of the groups from the background population. Person-years at risk were calculated from the time of study inclusion until first cutaneous cancer. To compare the risk of skin...... cancer between transplant recipients and background population, we used a stratified proportional hazard regression model for hazard ratio (HR) estimations. By use of the cumulative incidence, we estimated 5- and 10-year risks of skin cancers. All RTR and HSCT recipients were treated and followed up...

Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

Directory of Open Access Journals (Sweden)

Yuxiong Ji

2017-01-01

Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

Determination of stamp deformation during imprinting on semi-spherical surfaces

DEFF Research Database (Denmark)

Kafka, Jan; Matschuk, Maria; Pranov, Henrik

of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

Fabrication of Glass Microchannel via Glass Imprinting using a Vitreous Carbon Stamp for Flow Focusing Droplet Generator

Science.gov (United States)

Refatul Haq, Muhammad; Kim, Youngkyu; Kim, Jun; Oh, Pyoung-hwa; Ju, Jonghyun; Kim, Seok-Min; Lim, Jiseok

2017-01-01

This study reports a cost-effective method of replicating glass microfluidic chips using a vitreous carbon (VC) stamp. A glass replica with the required microfluidic microstructures was synthesized without etching. The replication method uses a VC stamp fabricated by combining thermal replication using a furan-based, thermally-curable polymer with carbonization. To test the feasibility of this method, a flow focusing droplet generator with flow-focusing and channel widths of 50 µm and 100 µm, respectively, was successfully fabricated in a soda-lime glass substrate. Deviation between the geometries of the initial shape and the vitreous carbon mold occurred because of shrinkage during the carbonization process, however this effect could be predicted and compensated for. Finally, the monodispersity of the droplets generated by the fabricated microfluidic device was evaluated. PMID:29286341

Fabrication of Glass Microchannel via Glass Imprinting using a Vitreous Carbon Stamp for Flow Focusing Droplet Generator

Directory of Open Access Journals (Sweden)

Hyungjun Jang

2017-12-01

Full Text Available This study reports a cost-effective method of replicating glass microfluidic chips using a vitreous carbon (VC stamp. A glass replica with the required microfluidic microstructures was synthesized without etching. The replication method uses a VC stamp fabricated by combining thermal replication using a furan-based, thermally-curable polymer with carbonization. To test the feasibility of this method, a flow focusing droplet generator with flow-focusing and channel widths of 50 µm and 100 µm, respectively, was successfully fabricated in a soda-lime glass substrate. Deviation between the geometries of the initial shape and the vitreous carbon mold occurred because of shrinkage during the carbonization process, however this effect could be predicted and compensated for. Finally, the monodispersity of the droplets generated by the fabricated microfluidic device was evaluated.

16 CFR 316.5 - Prohibition on charging a fee or imposing other requirements on recipients who wish to opt out.

Science.gov (United States)

2010-01-01

... other than the recipient's electronic mail address and opt-out preferences, or take any other steps except sending a reply electronic mail message or visiting a single Internet Web page, in order to: (a) Use a return electronic mail address or other Internet-based mechanism, required by 15 U.S.C. 7704(a...

Protocol for a national blood transfusion data warehouse from donor to recipient.

Science.gov (United States)

van Hoeven, Loan R; Hooftman, Babette H; Janssen, Mart P; de Bruijne, Martine C; de Vooght, Karen M K; Kemper, Peter; Koopman, Maria M W

2016-08-04

Blood transfusion has health-related, economical and safety implications. In order to optimise the transfusion chain, comprehensive research data are needed. The Dutch Transfusion Data warehouse (DTD) project aims to establish a data warehouse where data from donors and transfusion recipients are linked. This paper describes the design of the data warehouse, challenges and illustrative applications. Quantitative data on blood donors (eg, age, blood group, antibodies) and products (type of product, processing, storage time) are obtained from the national blood bank. These are linked to data on the transfusion recipients (eg, transfusions administered, patient diagnosis, surgical procedures, laboratory parameters), which are extracted from hospital electronic health records. Expected scientific contributions are illustrated for 4 applications: determine risk factors, predict blood use, benchmark blood use and optimise process efficiency. For each application, examples of research questions are given and analyses planned. The DTD project aims to build a national, continuously updated transfusion data warehouse. These data have a wide range of applications, on the donor/production side, recipient studies on blood usage and benchmarking and donor-recipient studies, which ultimately can contribute to the efficiency and safety of blood transfusion. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Stamping SERS for creatinine sensing

Science.gov (United States)

Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

2015-03-01

Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

NARCIS (Netherlands)

Karanikas, Nektarios; Schwarz, M; Harfmann, J

2017-01-01

A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

20 CFR 641.879 - What are the fiscal and performance reporting requirements for recipients?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What are the fiscal and performance reporting requirements for recipients? 641.879 Section 641.879 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION... Quarterly Progress Report (QPR) to the Department in electronic format via the Internet within 30 days after...

Time stamp generation with inverse FIR filters for Positron Emission Tomography

International Nuclear Information System (INIS)

Namias, Mauro

2009-01-01

Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

Science.gov (United States)

Brittain, Harry G

2016-01-01

Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates. © The Author(s) 2015.

All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

DEFF Research Database (Denmark)

Mikkelsen, Morten Bo Lindholm; Letailleur, Alban A; Søndergård, Elin

2011-01-01

We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprin......We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination...... of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without...

Analysis Of Die Design For The Stamping Of A Bathtub

Directory of Open Access Journals (Sweden)

Hojny M.

2015-06-01

Full Text Available The paper presents example results of numerical and photogrammetric analysis leading to identify the causes of cracking and wrinkling during bathtub W1200 production. The verification of tools for the stamping of bathtub W1200 was performed using finite element method and photogrammetric system ATOS Triple Scan. A series of industrial tests was conducted to identify the model parameters. The major and minor strain distributions obtained from the finite element simulations were used in conjunction with the forming limit diagram to predict the onset of fracture. In addition, the effects of blank holder pressure and friction on the occurrence of fracture and wrinkling were investigated.

An interactive and flexible approach to stamping design and optimization

International Nuclear Information System (INIS)

Roy, Subir; Kunju, Ravi; Kirby, David

2004-01-01

This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

Ramón y Cajal erroneously identified as Camillo Golgi on a souvenir postage stamp.

Science.gov (United States)

Triarhou, Lazaros C; del Cerro, Manuel

2012-01-01

Focusing on a philatelic oddity that erringly identifies a picture of Santiago Ramón y Cajal as that of Camillo Golgi, this brief article examines official and unofficial stamp issues honoring the two great neuroanatomists, one from Spain and the other from Italy, who were early Nobel Prize winners in Physiology or Medicine.

Defect detection and classification of galvanized stamping parts based on fully convolution neural network

Science.gov (United States)

Xiao, Zhitao; Leng, Yanyi; Geng, Lei; Xi, Jiangtao

2018-04-01

In this paper, a new convolution neural network method is proposed for the inspection and classification of galvanized stamping parts. Firstly, all workpieces are divided into normal and defective by image processing, and then the defective workpieces extracted from the region of interest (ROI) area are input to the trained fully convolutional networks (FCN). The network utilizes an end-to-end and pixel-to-pixel training convolution network that is currently the most advanced technology in semantic segmentation, predicts result of each pixel. Secondly, we mark the different pixel values of the workpiece, defect and background for the training image, and use the pixel value and the number of pixels to realize the recognition of the defects of the output picture. Finally, the defect area's threshold depended on the needs of the project is set to achieve the specific classification of the workpiece. The experiment results show that the proposed method can successfully achieve defect detection and classification of galvanized stamping parts under ordinary camera and illumination conditions, and its accuracy can reach 99.6%. Moreover, it overcomes the problem of complex image preprocessing and difficult feature extraction and performs better adaptability.

Assistance received by employed caregivers and their care recipients: who helps care recipients when caregivers work full time?

Science.gov (United States)

Scharlach, Andrew E; Gustavson, Kristen; Dal Santo, Teresa S

2007-12-01

This study examined the association among caregiver labor force participation, employees' caregiving activities, and the amount and quality of care received by care recipients. Telephone interviews were conducted with 478 adults who were employed full time and 705 nonemployed adults who provided care to a family member or friend aged 50 or older, identified through random sampling of California households. We assessed care recipient impairment and service problems; the amounts and types of assistance received from caregivers, family and friends, and paid providers; and caregiver utilization of support services. Care recipients of caregivers employed full time were less likely to receive large amounts of care from their caregivers, more likely to receive personal care from paid care providers, more likely to use community services, and more likely to experience service problems than were care recipients of nonemployed caregivers. Employed caregivers were more likely to use caregiver support services than were nonemployed caregivers. Accommodation to caregiver full-time employment involves selective supplementation by caregivers and their care recipients, reflecting increased reliance on formal support services as well as increased vulnerability to service problems and unmet care recipient needs. These findings suggest the need for greater attention to the well-being of disabled elders whose caregivers are employed full time.

Fabrication of a silicon oxide stamp by edge lithography reinforced with silicon nitride for nanoimprint lithography

NARCIS (Netherlands)

Zhao, Yiping; Berenschot, Johan W.; de Boer, M.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

2008-01-01

The fabrication of a stamp reinforced with silicon nitride is presented for its use in nanoimprint lithography. The fabrication process is based on edge lithography using conventional optical lithography and wet anisotropic etching of 110 silicon wafers. SiO2 nano-ridges of 20 nm in width were

14 CFR 1274.502 - Recipient responsibilities.

Science.gov (United States)

2010-01-01

... referred to such Federal, State or local authority as may have proper jurisdiction. ... AGREEMENTS WITH COMMERCIAL FIRMS Procurement Standards § 1274.502 Recipient responsibilities. The standards... contract(s). The recipient is the responsible authority, without recourse to NASA, regarding the settlement...

Electronic Health Object

Science.gov (United States)

Almunawar, Mohammad Nabil; Anshari, Muhammad; Younis, Mustafa Z.; Kisa, Adnan

2015-01-01

Electronic health records (EHRs) store health-related patient information in an electronic format, improving the quality of health care management and increasing efficiency of health care processes. However, in existing information systems, health-related records are generated, managed, and controlled by health care organizations. Patients are perceived as recipients of care and normally cannot directly interact with the system that stores their health-related records; their participation in enriching this information is not possible. Many businesses now allow customers to participate in generating information for their systems, strengthening customer relationships. This trend is supported by Web 2.0, which enables interactivity through various means, including social networks. Health care systems should be able to take advantage of this development. This article proposes a novel framework in addressing the emerging need for interactivity while preserving and extending existing electronic medical data. The framework has 3 dimensions of patient health record: personal, social, and medical dimensions. The framework is designed to empower patients, changing their roles from static recipient of health care services to dynamic and active partners in health care processes. PMID:26660486

22 CFR 226.41 - Recipient responsibilities.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Recipient responsibilities. 226.41 Section 226.41 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Procurement Standards § 226.41 Recipient...

49 CFR 19.41 - Recipient responsibilities.

Science.gov (United States)

2010-10-01

... to be referred to such Federal, State or local authority as may have proper jurisdiction. ... Requirements Procurement Standards § 19.41 Recipient responsibilities. The standards contained in this section... recipient is the responsible authority, without recourse to the Federal awarding agency, regarding the...

Electronic Biometric Transmission Specification. Version 1.2

Science.gov (United States)

2006-11-08

Prescribed by ANSI Std Z39-18 Electronic Biometric Transmission Specification DIN: DOD_BTF_TS_EBTS_ Nov06_01.02.00 i Revision History Revision...contains: • the ORI • a Greenwich Mean (a.k.a. Zulu or UTC) date/time stamp • a code for the software used at the point of collection/transmission...long names and would generally include the tribe name. Subfield 1 Item 1 Character Type AS Characters 1 to 50 Special Characters: Any 7-bit non

20 CFR 435.41 - Recipient responsibilities.

Science.gov (United States)

2010-04-01

... statute are to be referred to such Federal, State or local authority as may have proper jurisdiction. ..., AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Procurement Standards § 435.41 Recipient... responsibilities arising under its contract(s). The recipient is the responsible authority, without recourse to SSA...

22 CFR 518.41 - Recipient responsibilities.

Science.gov (United States)

2010-04-01

... statute are to be referred to such Federal, State or local authority as may have proper jurisdiction. ... Post-Award Requirements Procurement Standards § 518.41 Recipient responsibilities. The standards... contract(s). The recipient is the responsible authority, without recourse to the Federal awarding agency...

Improvement in current density of nano- and micro-structured Si solar cells by cost-effective elastomeric stamp process

Science.gov (United States)

Jeon, Kiseok; Jee, Hongsub; Lim, Sangwoo; Park, Min Joon; Jeong, Chaehwan

2018-03-01

Effective incident light should be controlled for improving the current density of solar cells by employing nano- and micro-structures on silicon surface. The elastomeric stamp process, which is more cost effective and simpler than conventional photolithography, was proposed for the fabrication of nano- and micro-structures. Polydimethylsiloxane (PDMS) was poured on a mother pattern with a diameter of 6 μm and a spacing of 2 μm; then, curing was performed to create a PDMS mold. The regular micropattern was stamped on a low-viscosity resin-coated silicon surface, followed by the simple reactive ion etching process. Nano-structures were formed using the Ag-based electroless etching process. As etching time was increased to 6 min, reflectance decreased to 4.53% and current density improved from 22.35 to 34.72 mA/cm2.

Nonmelanoma Skin Cancer in Nonwhite Organ Transplant Recipients.

Science.gov (United States)

Pritchett, Ellen N; Doyle, Alden; Shaver, Christine M; Miller, Brett; Abdelmalek, Mark; Cusack, Carrie Ann; Malat, Gregory E; Chung, Christina Lee

2016-12-01

Organ transplant recipients have a higher incidence of skin cancer. This risk is magnified over time and with continued exposure to immunosuppression. Skin cancer in nonwhite patients is associated with greater morbidity and mortality owing to diagnosis at a more advanced stage, which suggests that nonwhite organ transplant recipients are at even higher risk. To describe demographic and clinical factors and the incidence of skin cancer in nonwhite organ transplant recipients. We performed a retrospective medical record review of patients who were organ transplant recipients (154 were white and 259 nonwhite [black, Asian, Hispanic, Pacific Islander]) seen from November 1, 2011, to April 18, 2016 at an academic referral center. Variables were analyzed and compared between racial groups, including sex, age, race/ethnicity, Fitzpatrick type, type and location of skin cancer, type of organ transplanted, time to diagnosis of skin cancer after transplantation, and history of condyloma acuminata and/or verruca vulgaris. Most of the 413 patients (62.7%) evaluated were nonwhite organ transplant recipients; 264 were men, and 149 were women. Their mean (SD) age was 60.09 (13.59) years. Nineteen skin cancers were identified in 15 patients (5.8%) representing 3 racial/ethnic groups: black (6 patients), Asian (5), and Hispanic (4). All squamous cell carcinomas in blacks were diagnosed in the in situ stage, located on sun-protected sites, and occurred in patients whose lesions tested positive for human papilloma virus (HPV) and/or who endorsed a history of condyloma acuminata or verruca vulgaris. Most skin cancers in Asians were located on sun-exposed areas and occurred in individuals who emigrated from equatorial locations. Nonwhite organ transplant recipients are at risk for developing skin cancer posttransplantation. Follow-up in a specialized transplant dermatology center and baseline total-body skin examination should be part of posttransplantation care in all organ

41 CFR 105-74.660 - Recipient.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Recipient. 105-74.660 Section 105-74.660 Public Contracts and Property Management Federal Property Management Regulations System...-GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Definitions § 105-74.660 Recipient...

15 CFR 14.41 - Recipient responsibilities.

Science.gov (United States)

2010-01-01

... violation of statute are to be referred to such Federal, State or local authority as may have proper... COMMERCIAL ORGANIZATIONS Post-Award Requirements Procurement Standards § 14.41 Recipient responsibilities... responsibilities arising under its contract(s). The recipient is the responsible authority, without recourse to the...

28 CFR 70.41 - Recipient responsibilities.

Science.gov (United States)

2010-07-01

... violation of statute are to be referred to such Federal, State or local authority as may have proper... OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 70.41 Recipient... responsibilities arising under its contract(s). The recipient is the responsible authority, without recourse to the...

45 CFR 74.41 - Recipient responsibilities.

Science.gov (United States)

2010-10-01

... concerning violation of statute are to be referred to such Federal, State or local authority as may have... ORGANIZATIONS, AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Procurement Standards § 74.41 Recipient... responsibilities arising under its contract(s). The recipient is the responsible authority, without recourse to the...

Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

DEFF Research Database (Denmark)

Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

2007-01-01

A highly conducting stretchable polymer material has been patterned using additive inkjet printing and by subtractive agarose stamping of a deactivation agent (hypochlorite). The material consisted of elastomeric polyurethane combined in an interpenetrating network with a conductive polymer, poly(3....... Inkjet printing of the material was only possible if a short-chain polyurethane was used as elastomer to overcome strain hardening at the neck of the droplets produced for printing. Reproducible line widths down to 200 μm could be achieved by inkjet printing. Both methods were used to fabricate test...

Immunosuppression in the elderly renal allograft recipient

DEFF Research Database (Denmark)

Montero, Nuria; Pérez-Sáez, María José; Pascual, Julio

2016-01-01

BACKGROUND: The Elderly are the fastest growing part of kidney transplant recipients. The best immunosuppressive strategy is unknown. METHODS: We performed a systematic search of randomized controlled trials and observational studies focused on safety and efficacy of different immunosuppression...... strategies in elderly kidney recipients. Data extraction and risk of bias evaluation were systematically performed. RESULTS: Ten studies were included: 2 randomized clinical trials and 8 observational. A marginal benefit was found for early renal function with delayed tacrolimus or complete tacrolimus...... receptor antibody induction, calcineurin-inhibitor minimization with MMF and steroid minimization is advisable in the low immunologic risk elderly recipient, considering the increased risk of toxicities, infection and malignancies. In the high immunologic risk elderly recipient, taking into account...

Social participation and psychosocial outcomes of young adults with chronic physical conditions: Comparing recipients and non-recipients of disability benefits.

Science.gov (United States)

Bal, Marjolijn I; Sattoe, Jane N T; Miedema, Harald S; van Staa, AnneLoes

2018-03-01

Little is known about any differences between young people with chronic physical conditions who do and do not apply for disability benefits in young adulthood for providing insights for future policy and rehabilitation care. We aimed to identify predictors during adolescence of receiving disability benefits in young adulthood and to compare recipients and non-recipients of benefits in social participation and psychosocial outcomes in young adulthood. Follow-up study of 18 to 25 year olds with various chronic conditions who at adolescent age completed a web-based survey (n=518; T0). The outcome was receiving disability benefits (yes or no). Associations with background characteristics, social participation, and impact of the chronic condition were explored with stepwise multivariate modelling, using T0 variables. Differences between recipients and non-recipients were explored using chi-square tests and t-tests. Receiving disability benefits in young adulthood was associated with greater extent of physical disability, receiving less special education, absenteeism at school/work, and low health-related quality of life during adolescence. In young adulthood, recipients of benefits reported higher perceived impact of the chronic condition on their school/work career and lower quality of life than non-recipients. Social participation varied across domains. This study provides important insights into the characteristics of a vulnerable subgroup of young people with chronic physical conditions. Disability benefit recipients experienced more impact of their chronic condition and reported a lower health-related quality of life over time than non-recipients. Rehabilitation professionals are encouraged to use patient-reported outcomes to address the lived experiences and screen the need for psychosocial support of this vulnerable subgroup of young people with chronic physical conditions. Copyright © 2018. Published by Elsevier Masson SAS.

Decreased cerebral blood flow in renal transplant recipients

International Nuclear Information System (INIS)

Kamano, Chisako; Komaba, Yuichi; Sakayori, Osamu; Iino, Yasuhiko; Katayama, Yasuo

2002-01-01

We performed single-photon emission computed tomography (SPECT) to investigate the influence of renal transplantation on cerebral blood flow (CBF). Fifteen renal transplant recipients and twelve normal subjects underwent cerebral SPECT with N-isopropyl-p-[ 123 I] iodoamphetamine ( 123 I-IMP). All transplant recipients received prednisolone and cyclosporine (CyA). Regional CBF (rCBF) was measured by defining regions of interest in the cerebral cortex, deep white matter, striatum, thalamus, and cerebellum. In transplant recipients, correlations to the mean overall cortical CBF were assessed using the interval from transplantation to measurement of SPECT, as well as the serum creatinine concentration. Moreover, to investigate the influence of CyA on CBF, the correlation between mean overall cortical CBF and CyA trough concentrations was assessed. In all regions, CBF in renal transplant recipients was significantly lower than in normal subjects. No significant correlation was seen between serum creatinine, interval from transplantation, or CyA trough concentrations and mean overall cortical CBF. Renal transplant recipients demonstrated a decrease in CBF, that can have an associated secondary pathology. Therefore, renal transplant recipients may benefit from post-operative MRI or CT. (author)

SERUM PARAOXONASE ACTIVITY IN RENAL TRANSPLANT RECIPIENTS

Directory of Open Access Journals (Sweden)

Saritha Gadicherla

2017-12-01

Full Text Available BACKGROUND Serum paraoxonase is an enzyme synthesised in the liver. It is known to prevent atherosclerosis by inhibiting oxidation of lowdensity lipoprotein. Renal transplant recipients have increased tendency for developing atherosclerosis and cardiovascular disease. Reduced activity of serum paraoxonase contributes to accelerated atherosclerosis and increased cardiovascular complications in these patients. The aim of this study was to estimate serum paraoxonase activity in renal transplant recipients and compare it with healthy controls. MATERIALS AND METHODS 30 renal transplant recipients and 30 age and sex matched healthy controls were taken for the study. Serum paraoxonase activity, blood urea, serum creatinine and uric acid were estimated in these groups. The serum paraoxonase activity was correlated with urea, creatinine and uric acid levels. RESULTS Serum paraoxonase activity was reduced in renal transplant recipients compared to healthy controls. There was a negative correlation between paraoxonase activity and the levels of urea, creatinine and uric acid levels. CONCLUSION In this study, the paraoxonase activity was reduced in renal transplant recipients compared to controls. The increased cardiovascular disease in these patients could be due to reduced paraoxonase activity.

Recipients affect prosocial and altruistic choices in jackdaws, Corvus monedula.

Directory of Open Access Journals (Sweden)

Christine Schwab

Full Text Available Other-regarding preferences are a critical feature of human cooperation but to what extent non-human animals exhibit these preferences is a matter of intense discussion. We tested whether jackdaws show prosocial behaviour (providing benefits to others at no cost to themselves and altruism (providing benefits to others while incurring costs with both sibling and non-sibling recipients. In the prosocial condition, a box was baited on both the actor's and the recipient's side (1/1 option, whereas another box provided food only for the actor (1/0 option. In the altruistic condition, the boxes contained food for either the actor (1/0 option or the recipient (0/1 option. The proportion of selfish (1/0 option and cooperative (1/1 and 0/1 option, respectively actors' choices was significantly affected by the recipients' behaviour. If recipients approached the boxes first and positioned themselves next to the box baited on their side, trying to access the food reward (recipient-first trials, actors were significantly more cooperative than when the actors approached the boxes first and made their choice prior to the recipients' arrival (actor-first trials. Further, in recipient-first trials actors were more cooperative towards recipients of the opposite sex, an effect that was even more pronounced in the altruistic condition. Hence, at no cost to the actors, all recipients could significantly influence the actors' behaviour, whereas at high costs this could be achieved even more so by recipients of different sex. Local/stimulus enhancement is discussed as the most likely cognitive mechanism to account for these effects.

Recipients affect prosocial and altruistic choices in jackdaws, Corvus monedula.

Science.gov (United States)

Schwab, Christine; Swoboda, Ruth; Kotrschal, Kurt; Bugnyar, Thomas

2012-01-01

Other-regarding preferences are a critical feature of human cooperation but to what extent non-human animals exhibit these preferences is a matter of intense discussion. We tested whether jackdaws show prosocial behaviour (providing benefits to others at no cost to themselves) and altruism (providing benefits to others while incurring costs) with both sibling and non-sibling recipients. In the prosocial condition, a box was baited on both the actor's and the recipient's side (1/1 option), whereas another box provided food only for the actor (1/0 option). In the altruistic condition, the boxes contained food for either the actor (1/0 option) or the recipient (0/1 option). The proportion of selfish (1/0 option) and cooperative (1/1 and 0/1 option, respectively) actors' choices was significantly affected by the recipients' behaviour. If recipients approached the boxes first and positioned themselves next to the box baited on their side, trying to access the food reward (recipient-first trials), actors were significantly more cooperative than when the actors approached the boxes first and made their choice prior to the recipients' arrival (actor-first trials). Further, in recipient-first trials actors were more cooperative towards recipients of the opposite sex, an effect that was even more pronounced in the altruistic condition. Hence, at no cost to the actors, all recipients could significantly influence the actors' behaviour, whereas at high costs this could be achieved even more so by recipients of different sex. Local/stimulus enhancement is discussed as the most likely cognitive mechanism to account for these effects.

Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

DEFF Research Database (Denmark)

Taylor, Hayden; Smistrup, Kristian; Boning, Duane

2011-01-01

We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

Influenza vaccine strategies for solid organ transplant recipients.

Science.gov (United States)

Hirzel, Cédric; Kumar, Deepali

2018-05-15

The aim of this study was to highlight recent evidence on important aspects of influenza vaccination in solid organ transplant recipients. Influenza vaccine is the most evaluated vaccine in transplant recipients. The immunogenicity of the vaccine is suboptimal after transplantation. Newer formulations such as inactivated unadjuvanted high-dose influenza vaccine and the administration of a booster dose within the same season have shown to increase response rates. Intradermal vaccination and adjuvanted vaccines did not show clear benefit over standard influenza vaccines. Recent studies in transplant recipients do not suggest a higher risk for allograft rejection, neither after vaccination with a standard influenza vaccine nor after the administration of nonstandard formulation (high-dose, adjuvanted vaccines), routes (intradermally) or a booster dose. Nevertheless, influenza vaccine coverage in transplant recipients is still unsatisfactory low, potentially due to misinterpretation of risks and benefits. Annual influenza vaccination is well tolerated and is an important part of long-term care of solid organ transplant recipients.

Springback Reduction in Stamping of Front Side Member with a Response Surface Method

International Nuclear Information System (INIS)

Song, Jung-Han; Huh, Hoon; Kim, Se-Ho; Park, Sung-Ho

2005-01-01

Springback is a common phenomenon in sheet metal forming since the elastic recovery of the internal stresses is induced after removal of the tooling. The numerical analysis of springback is a complicated time-consuming job and its result is greatly effected by a type of the yield function, finite elements used and the constraint condition for eliminating a rigid body motion. In this paper, optimization of the draw-bead force is carried out utilizing the response surface method in order to reduce springback and improve shape accuracy of a deep drawn product. In the optimization process, the tendency of springback is evaluated qualitatively without springback simulation usually done with the implicit solving scheme. Instead of springback simulation, the amount of stress deviation along the thickness direction in the deep drawn product is used as an indicator of springback. The stamping process is analyzed for a front side member formed with advanced high strength steel (AHSS) sheets such as DP60. The analysis procedure fully covers the binder-wrap, stamping, trimming and springback processes with the commercial elasto-plastic finite element code LS-DYNA 3D. The effect of the restraining force of draw-beads is confirmed with the decreased stress deviation. The analysis result shown in the final springback simulation demonstrates that the present analysis provides a guideline for controlling the evolution of springback based on the finite element simulation of complicated auto-body members

Donor/recipient sex mismatch and survival after heart transplantation: only an issue in male recipients? An analysis of the Spanish Heart Transplantation Registry.

Science.gov (United States)

Martinez-Selles, Manuel; Almenar, Luis; Paniagua-Martin, Maria J; Segovia, Javier; Delgado, Juan F; Arizón, Jose M; Ayesta, Ana; Lage, Ernesto; Brossa, Vicens; Manito, Nicolás; Pérez-Villa, Félix; Diaz-Molina, Beatriz; Rábago, Gregorio; Blasco-Peiró, Teresa; De La Fuente Galán, Luis; Pascual-Figal, Domingo; Gonzalez-Vilchez, Francisco

2015-03-01

The results of studies on the association between sex mismatch and survival after heart transplantation are conflicting. Data from the Spanish Heart Transplantation Registry. From 4625 recipients, 3707 (80%) were men. The donor was female in 943 male recipients (25%) and male in 481 female recipients (52%). Recipients of male hearts had a higher body mass index (25.9 ± 4.1 vs. 24.3 ± 3.7; P gender (P = 0.02). In the multivariate analysis, sex mismatch was associated with long-term mortality (HR, 1.14; 95% CI 1.01-1.29; P = 0.04), and there was a tendency toward significance for the interaction between sex mismatch and recipient gender (P = 0.08). In male recipients, mismatch increased mortality mainly during the first month and in patients with pulmonary gradient >13 mmHg. Sex mismatch seems to be associated with mortality after heart transplantation in men but not in women. © 2014 Steunstichting ESOT.

Renal cancer in recipients of kidney transplant

Directory of Open Access Journals (Sweden)

Prajwal Dhakal

2017-03-01

Full Text Available The aim of our study is to determine characteristics and outcomes of kidney cancer in renal transplant recipients. MEDLINE ® database was searched in June 2015 to identify cases of kidney cancer in renal transplant recipients. We include also a new case. Descriptive statistics were used for analysis. Forty-eight (48 recipients reported in 25 papers met the eligibility criteria. The median age was 47 years (range 9-66; 27% were females. Chronic glomerulonephritis, cystic kidney disease and hypertension were common indications for renal transplant. Among donors 24% were females and the median age was 52.5 years (17- 73; 62% of kidney cancers were donor-derived. The median interval between transplant and cancer diagnosis was shorter for cancer of recipient versus donor origin (150 vs. 210 days. Clear cell carcinoma was diagnosed in 17%. 25% had metastasis at diagnosis. Kidney explantation or excision was done in 90% and 84% of cases with and without metastasis respectively. The median survival was 72 months. Actuarial 1-year and 5-year survival rates were 73.4% and 55.1% respectively. Among the recipients from 7 donors who subsequently developed malignancy, 57% were dead within a year. Kidney transplant recipients have a small risk of kidney cancer, which affects younger patients and occurs within a year of transplant, likely due to immunosuppression. Whether the use of older donors may increase the likelihood needs further investigation. The presence of metastasis, explantation or excision of affected kidney and development of cancer in donors predict outcomes. The results may guide patient education and informed decision-making.

40 CFR 35.6285 - Recipient payment of response costs.

Science.gov (United States)

2010-07-01

... payment of response costs. The recipient may pay for its share of response costs using cash, services... costs in the form of cash. (b) Services. The recipient may provide equipment and services to satisfy its... CFR part 300). (d) Excess cash cost share contributions/overmatch. The recipient may direct EPA to...

Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

International Nuclear Information System (INIS)

Dague, E; Jauvert, E; Laplatine, L; Thibault, C; Viallet, B; Ressier, L

2011-01-01

Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

Experimental study on the warm forming and quenching behavior for hot stamping of high-strength aluminum alloys

Science.gov (United States)

Degner, J.; Horn, A.; Merklein, M.

2017-09-01

Within the last decades, stringent regulations on fuel consumption, CO2 emissions and product recyclability forced the automotive sector to implement new strategies within the field of car body manufacturing. Due to their low density and good corrosion resistance, aluminum became one of the most relevant lightweight materials. Recently, especially high- strength aluminum alloys for structural components gained importance. Since the low formability of these alloys limits their application, there is a need for novel process strategies in order to enhance the forming behavior. One promising approach is the hot stamping of aluminum alloys. The combination of quenching and forming in one step after solution heat treatment leads to a significant improvement of the formability. Furthermore, higher manufacturing accuracy can be achieved due to reduced spring back. Within this contribution, the influence of forming temperature on the subsequent material behavior and the heat transfer during quenching will be analyzed. Therefore, the mechanical and thermal material characteristics such as flow behavior and heat transfer coefficient during hot stamping are investigated.

Auto-représentations de l’Irlande à travers les timbres et la monnaie Self-representations of Ireland through Stamps and Coinage

Directory of Open Access Journals (Sweden)

Alexandra Dilys-Slaby

2009-11-01

Full Text Available The representation of Ireland on stamps and coinage is the locus of the formulation by the government of national identity—a crucial stage in the development of a newly independent state. Charles Sanders Peirce’s semiotic trilogy—symbol, icon and index—enables one to better understand the intentions and the evolution informing the State’s self-representation. The stakes vary from one medium to another. Coins and notes are images of Ireland which circulate inside the country only and last longer, the government intervening only occasionally to change those images. It can be noted that these media, which are more apolitical and atemporal, retain a symbolic function longer. As for stamps, they are meant to represent Ireland inside the country as well as abroad. They are then particularly entitled to representing the events or characters which Ireland includes in the development of its identity as a young State. Thus, stamps display a general evolution from being symbols to being indexes as the government acknowledges as foundations of its identity no longer merely nationalism and religion, but also scientific development, sports and art. On the level of the form, this evolution is backed by a movement towards simplification and universal legibility.

Achieving blood pressure control among renal transplant recipients by integrating electronic health technology and clinical pharmacy services.

Science.gov (United States)

Migliozzi, Daniel R; Zullo, Andrew R; Collins, Christine; Elsaid, Khaled A

2015-11-15

The implementation and outcomes of a program combining electronic home blood pressure monitoring (HBPM) and pharmacist-provided medication therapy management (MTM) services in a renal transplantation clinic are described. Patients enrolled in the program were provided with a computer-enabled blood pressure monitor. A dedicated renal transplantation pharmacist was integrated into the renal transplantation team under a collaborative care practice agreement. The collaborative care agreement allowed the pharmacist to authorize medication additions, deletions, and dosage changes. Comprehensive disease and blood pressure education was provided by a clinical pharmacist. In the pretransplantation setting, the pharmacist interviewed the renal transplant candidate and documents allergies, verified the patient's medication profile, and identified and assessed barriers to medication adherence. A total of 50 renal transplant recipients with at least one recorded home blood pressure reading and at least one year of follow-up were included in our analysis. A significant reduction in mean systolic and diastolic blood pressure values were observed at 30, 90, 180, and 360 days after enrollment in the program (p services implemented in a renal transplant clinic was associated with sustained improvements in blood pressure control. Incorporation of a pharmacist in the renal transplant clinic resulted in the detection and resolution of medication-related problems. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Predicting the ideal serum creatinine of kidney transplant recipients by a simple formula based on the balance between metabolic demands of recipients and renal mass supply from donors.

Science.gov (United States)

Oh, C K; Lee, B M; Kim, H; Kim, S I; Kim, Y S

2008-09-01

Serum creatinine (Scr) is the most frequently used test to estimate graft function after kidney transplantation. Our previous study demonstrated that the independent predictors of recipient posttransplantation Scr included the ratio of graft weight to recipient body weight, the ratio of graft weight to recipient body surface area (BSA), and the ratio of graft weight to recipient body mass index (BMI). A prospective analysis about the impact of the balance between metabolic demands and renal supply on posttransplantation Scr of recipients was previously reported. We plotted the scatter graph using the X-axis as the independent predictors of Scr by linear regression and the Y-axis as the recipient Scr. To generate the predictive formula of Scr, we calculated a fit of the line of plotted cases using a linear regression method with 2 regression lines for prediction of the upper and lower 95% confidence intervals. Each line was converted into a predictive formula: Scr = -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.75. Under 95% confidence, the Scr ranges from -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.07 to -0.0033* (Graft weight(g)/Recipient BSA (m2))+2.44. Scr = -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.72, which ranges from -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.06 to -0.1049* (Graft weight(g)/Recipient body weight(kg))+2.37. Scr = -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+1.56, which ranges from -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+0.75 to -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+2.26. Prediction of posttransplantation Scr may be achieved by measuring graft weight as well as recipient weight and height. When recipient Scr is significantly higher than that predicted by the formula, a clinician should suspect an underlying graft injury.

Microstructure and Properties of a New Cr - Mn Steel without Boron Additions for Use in Hot Stamping

Science.gov (United States)

Zhou, H.; Zhu, G.; Li, Q.; Chen, Q.

2015-09-01

Anew hot-stamping steel that is alloyed with chromium and manganese and does not contain boron additions has been developed. The effect of reheating temperature and cooling rates on the mechanical properties and structure of the steel is determined. Atreatment regime that increases the ductility of the steel without a noticeable decrease in its strength is proposed.

Training NIH K award recipients: the role of the mentor.

Science.gov (United States)

Ripley, Elizabeth; Markowitz, Monika; Nichols-Casebolt, Ann; Williams, Larry; Macrina, Francis

2012-10-01

Mentors play important roles in training new investigators. This study was designed to determine characteristics of NIH mentored K award recipients and their mentors, their interpersonal interactions, and the factors, which influence satisfaction within this relationship. A survey of 3027 NIH mentored K recipients and 1384 mentors was conducted in 2009. Nine hundred twenty-nine (30.7%) of the K recipients and 448 (32.4%) mentors completed the survey. The gender of K respondents was evenly divided while the mentors were 72.1% male. The overall rating of their mentors was positive. Ideally, both thought the mentor should be important in research training; however, in actual practice, both rated the importance as lower. A total of 88.2% of recipients were satisfied with their relationship. Although the number of black K recipients was low, this group was more likely to be dissatisfied with the mentor relationship (6/29 or 20.7%) than their white counterparts. The frequency of meeting or communicating was correlated with K recipient satisfaction. Overall K recipients are satisfied with their mentor relationships. Although the number of black K recipient respondents was small, the higher level of mentor dissatisfaction should be further evaluated. Qualities of mentors, including the frequency of interactions and accessibility, can influence satisfaction. © 2012 Wiley Periodicals, Inc.

21 CFR 99.105 - Recipients of information.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Recipients of information. 99.105 Section 99.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL... Disseminated § 99.105 Recipients of information. A manufacturer disseminating information on a new use under...

Památky starověké Núbie na známkách světa // Monuments of Ancient Nubia on postage stamps of the modern world

Directory of Open Access Journals (Sweden)

Břetislav Vachala

2015-06-01

Full Text Available The successful International UNESCO Campaign to Save the Monuments of (Egyptian and Sudanese Nubia became an important motif on the postage stamps of 47 countries of the world in the years 1960–1980. The stamps host famous rescued temples (listed here according to frequency of the used motifs, including general views, details of architecture and relief decoration of Abu Simbel, Philae, Wadi es-Sebua, and Dakka, the Kiosk of Qertassi and the South - ern temple of Buhen. Moreover, some of the unique painted murals found in the episcopal cathedral at Faras were reproduced on Polish stamps. The philatelic contribution to the campaign was far from symbolic. The total philatelic revenue (including income from the Philae Medals reached 112,665.64 US dollars. The philatelic activity of 47 countries substantially contributed to the publicity of the UNESCO Nubia Campaign around the world.

AMS/DOE Fellowship Recipients

Energy Technology Data Exchange (ETDEWEB)

Armstrong, Stephanie [American Meteorological Society, Boston, MA (United States)

2016-11-21

The AMS/DOE graduate fellowships were awarded to three students entering their first year of graduate study. The funds allowed each student to take a full course load during their first of year of graduate study which helps each of them to enter the professional, scientific community at an earlier date. Each recipient is academically outstanding, received glowing references of support and demonstrated their strong desire to perform scientific research. As part of the fellowship, each of the students was invited to attend the AMS Annual Meeting where they got to participate in the AMS student conference, attend scientific sessions and visit the exhibition hall. In addition, a student awards luncheon was held where each of the recipients got to meet their sponsor and receive a certificate.

Stamps, Stickers and Stigmata. A Social Practice of Antisemitism Presented in a Slide-show

Directory of Open Access Journals (Sweden)

Isabel Enzenbach

2012-07-01

Full Text Available Antisemitic stickers were disseminated in Germany from the 1880s/1890s onwards. They were glued on letters or postcards, placed visibly in public space or collected in the private sphere. In rethinking antisemitism as a social practice, these stickers, stamps and adhesive labels can be seen as a prototypical source demonstrating the performative dimension of antisemtism. The antisemitic movement used various media such as leaflets, cartoons, speeches, historical novels, articles or newspapers to mobilize people and to build up a community.

Antithymocyte antibody-induced coagulopathy in renal transplant recipients.

Science.gov (United States)

Siparsky, N F; Klein, R; Kushnir, L F; Gallichio, M H; Conti, D J

2013-05-01

Antithymocyte antibody (ATA) remains the most commonly used induction immunosuppressive agent in renal transplantation (RT). To date, few case reports of ATA-induced coagulopathy exist. We performed a single-center, retrospective analysis of renal transplant recipients (RTRs) who underwent RT followed by ATA therapy between 2007 and 2011. The protocol used for deceased donor and unrelated living donor recipient immunosuppression was Thymoglobulin (TMG), methylprednisolone, Cellcept, Prograf, and Rapamune. In related living donor recipients, Simulect (SIM) was substituted for TMG. The international normalized ratio (INR) was routinely checked on days 0 and 2, and thereafter at the discretion of the surgeon. RTRs were transfused packed red blood cells (PRBCs) or fresh frozen plasma (FFP) at the discretion of the surgeon. During the study period, 257 RTs were performed at our institution. The following 18 RTR were excluded: simultaneous kidney and pancreas transplant recipients (4), RTRs on warfarin at the time of admission (2), RTRs who received OKT3 (2), and RTRs with INR ≥ 1.2 at the time of admission (10). Of the remaining 239 RTR, 208 (87%) underwent TMG induction therapy; 31 RTR (13%) underwent SIM induction therapy. The mean INR peaked in both groups on day 4 but was higher in TMG recipients (TMG 1.35, SIM 1.20). FFP was transfused in 65 TMG (31%) and 3 SIM (10%) recipients (P = .01); PRBCs were transfused in 88 TMG (44%) and 6 SIM (19%) recipients (P = .02). No patients returned to the operating room for bleeding complications within 7 days of RT. Patient age, gender, ethnicity, and diabetes status were not statistically significant factors in the development of coagulopathy. TMG administration is associated with coagulopathy. Using an INR screening protocol and an aggressive transfusion protocol, bleeding complications associated with coagulopathy can be avoided in this higher-risk group. Copyright © 2013 Elsevier Inc. All rights reserved.

New technique for laryngotracheal mucosa transplantation. 'Stamp' welding using indocyanine green dye and albumin interaction with diode laser.

Science.gov (United States)

Wang, Z; Pankratov, M M; Gleich, L L; Rebeiz, E E; Shapshay, S M

1995-07-01

To investigate (1) the possibility of survival of free mucosa "stamp" grafts fixed in the airway with a new technique using indocyanine green-dyed albumin solder activated with a diode laser and (2) the degree of improvement of wound healing in the airway by applying modified microskin transplantation techniques from burn surgery to cover a relatively large wound with a few small pieces of mucosa anchored in place with the previously mentioned technique. Three (one control and two experimental) rectangular (10 x 8 mm) wounds in tracheal mucosa were produced in four experimental animals (dogs) using a carbon dioxide laser. The control wound was left uncovered. In the first experimental wound, a mucosal flap was raised and then fixed in place by a trapdoor flap method. In the second experimental wound, two small (each 2 x 3 mm) autogenous mucosa grafts were anchored onto the surface with indocyanine green-dyed albumin activated with an 810-nm diode laser. Histomorphologically, the postoperative results from three wounds were compared. The experimental wounds were completely covered by regenerated squamous cells in 1 week and by ciliated epithelium in 2 weeks after the operation despite the discrepancy in size of the graft to wound area (1:6.7) covered with the stamp mucosa. No thermal damage from the diode laser was noted in the second experimental wounds. In the control wounds, no coverage was observed at 1 week, and only squamous cells were noted 2 weeks postoperatively. All the wounds had normal ciliated epithelium coverage at 4 weeks. Transplanted stamp grafts provided similar or better healing than trapdoor flap transplants. This new technique made endoscopic mucosal grafting possible and offers a potential breakthrough in the management of laryngotracheal stenosis.

Airway complications have a greater impact on the outcomes of living-donor lobar lung transplantation recipients than cadaveric lung transplantation recipients.

Science.gov (United States)

Sugimoto, Seiichiro; Yamane, Masaomi; Otani, Shinji; Kurosaki, Takeshi; Okahara, Shuji; Hikasa, Yukiko; Toyooka, Shinichi; Kobayashi, Motomu; Oto, Takahiro

2018-04-21

Airway complications (ACs) after living-donor lobar lung transplantation (LDLLT) could have different features from those after cadaveric lung transplantation (CLT). We conducted this study to compare the characteristics of ACs after LDLLT vs. those after CLT and investigate their impact on outcomes. We reviewed, retrospectively, data on 163 recipients of lung transplantation, including 83 recipients of LDLLT and 80 recipients of CLT. The incidence of ACs did not differ between LDLLT and CLT. The initial type of AC after LDLLT was limited to stenosis in all eight patients, whereas that after CLT consisted of stenosis in three patients and necrosis in ten patients (p = 0.0034). ACs after LDLLT necessitated significantly earlier initiation of treatment than those after CLT (p = 0.032). The overall survival rate of LDLLT recipients with an AC was significantly lower than that of those without an AC (p = 0.030), whereas the overall survival rate was comparable between CLT recipients with and those without ACs (p = 0.25). ACs after LDLLT, limited to bronchial stenosis, require significantly earlier treatment and have a greater adverse impact on survival than ACs after CLT.

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

Science.gov (United States)

Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

2018-04-01

Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

On the Determination of the Blank Shape Contour for Thin Precision Parts Obtained by Stamping

International Nuclear Information System (INIS)

Azaouzi, M.; Delameziere, A.; Naceur, H.; Batoz, J. L.; Sibaud, D.; Belouettar, S.

2007-01-01

The present study deals with the 'automatic' determination of the initial blank shape contour for 3D thin metallic precision parts obtained by stamping, knowing the 3D CAD geometry of the final part (the desired product). The forming process can involve several steps presented in this paper that consists in applying a heuristic method of optimization to find out the initial blank shape of thin precision metallic part in order to obtain a final part, with a required 3D geometry (specified). The purpose of the present approach is to replace the experimental trial and error optimization method used currently, which is expensive and time consuming. The principle of the 'heuristic' optimization method is to first estimate the blank shape using the Inverse Approach, then to compensate the shape error calculated in each node of the blank contour. The 'heuristic' optimization loop is done using a precise incremental code (Abaqus Explicit or Stampack) and, the iterations loop is stopped when the shape errors are within some initially fixed tolerances. The method is tested in the case of a special stamping process where the parts are pressed in one or more steps using a manual press, without blank holder and by the mean of tools having complex shape. The sensitivities of the process parameters regarding the optimal solution are investigated

Sexual concerns among kidney transplant recipients.

Science.gov (United States)

Muehrer, Rebecca J; Lanuza, Dorothy M; Brown, Roger L; Djamali, Arjang

2014-11-01

Little is known about the specific sexual concerns of kidney transplant (KTx) recipients. The primary objectives of this study were to: (i) describe the importance of sexuality to KTx recipients; (ii) investigate the sexual concerns of KTx recipients; and (iii) examine the relationship between sexual concerns and quality of life (QOL). A secondary objective was to examine potential sexual concern differences by gender, pre-transplant dialysis status, and donor type. This study employed a cross-sectional, descriptive, correlational design. Sexual concerns were identified using the Sexual Concerns Questionnaire, which contains seven subscales. QOL was measured with the SF-8 and the QOL Uniscale. Nearly 73% of subjects rated sexuality as important. Subscales indicating highest area of sexual concerns were communication with healthcare providers about sexuality (Mean (M) = 2.70) and sexual pleasure concerns (M = 2.45). Higher concern ratings regarding health consequences of sexual activity, quality of sexual relationship, sexual pleasure, sexual functioning problems, and pessimistic beliefs about treatment were significantly, inversely related to QOL. Women had significantly higher scores on the Sexual Pleasure and Communication with Healthcare Providers subscales than men. This study reports the sexual concerns of KTx recipients' who are an average of four yr since surgery, and the relationship of these concerns to QOL. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

CERN Multimedia

Maximilien Brice

2004-01-01

For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

Rabies in Transplant Recipients

Centers for Disease Control (CDC) Podcasts

2016-09-19

Dr. Richard Franka, a CDC scientist, discusses rabies in organ transplant recipients.  Created: 9/19/2016 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 9/19/2016.

Impact of Simulation Technology on Die and Stamping Business

Science.gov (United States)

Stevens, Mark W.

2005-08-01

Over the last ten years, we have seen an explosion in the use of simulation-based techniques to improve the engineering, construction, and operation of GM production tools. The impact has been as profound as the overall switch to CAD/CAM from the old manual design and construction methods. The changeover to N/C machining from duplicating milling machines brought advances in accuracy and speed to our construction activity. It also brought significant reductions in fitting sculptured surfaces. Changing over to CAD design brought similar advances in accuracy, and today's use of solid modeling has enhanced that accuracy gain while finally leading to the reduction in lead time and cost through the development of parametric techniques. Elimination of paper drawings for die design, along with the process of blueprinting and distribution, provided the savings required to install high capacity computer servers, high-speed data transmission lines and integrated networks. These historic changes in the application of CAE technology in manufacturing engineering paved the way for the implementation of simulation to all aspects of our business. The benefits are being realized now, and the future holds even greater promise as the simulation techniques mature and expand. Every new line of dies is verified prior to casting for interference free operation. Sheet metal forming simulation validates the material flow, eliminating the high costs of physical experimentation dependent on trial and error methods of the past. Integrated forming simulation and die structural analysis and optimization has led to a reduction in die size and weight on the order of 30% or more. The latest techniques in factory simulation enable analysis of automated press lines, including all stamping operations with corresponding automation. This leads to manufacturing lines capable of running at higher levels of throughput, with actual results providing the capability of two or more additional strokes per

Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P)

International Nuclear Information System (INIS)

Ariza, E.A.; Nishikawa, A.S; Goldenstein, H.; Tschiptschin, A.P.

2016-01-01

Thermomechanical simulation of quenching, hot stamping, and quenching and partitioning processes of a high-strength TRIP-assisted steel were carried out in a Gleeble®3S50 thermo-mechanical simulator, coupled to the synchrotron X-ray diffraction line. The microstructures and mechanical properties were analyzed using Field Emission Gun Scanning Electron Microscopy (FEG-SEM), X-ray diffraction, and nanoindentation. The microstructures of thermomechanical treated specimens were modeled using the Object Oriented Finite Element (OOF) technique. The modeled microstructures were then fed into a finite element model to predict the mechanical behavior. By using a reverse algorithm method, the elasto-plastic mechanical properties of different microconstituents were determined. This was done through the analysis of instrumented nanoindentation loading-penetration curves. Tensile properties of the thermomechanical processed steels were measured by tensile testing of subsized specimens cut from samples processed on the Gleeble®3S50. The comparison between the experimental results and those of the reverse algorithm and the OOF modeled microstructure showed quite good agreement.

Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P)

Energy Technology Data Exchange (ETDEWEB)

Ariza, E.A., E-mail: andersonariza@usp.br [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Brazilian Nanotechnology National Laboratory, LNNano, CNPEM, Brazilian Center for Research in Energy and Materials (Brazil); Nishikawa, A.S; Goldenstein, H. [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Tschiptschin, A.P. [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Brazilian Nanotechnology National Laboratory, LNNano, CNPEM, Brazilian Center for Research in Energy and Materials (Brazil)

2016-08-01

Thermomechanical simulation of quenching, hot stamping, and quenching and partitioning processes of a high-strength TRIP-assisted steel were carried out in a Gleeble®3S50 thermo-mechanical simulator, coupled to the synchrotron X-ray diffraction line. The microstructures and mechanical properties were analyzed using Field Emission Gun Scanning Electron Microscopy (FEG-SEM), X-ray diffraction, and nanoindentation. The microstructures of thermomechanical treated specimens were modeled using the Object Oriented Finite Element (OOF) technique. The modeled microstructures were then fed into a finite element model to predict the mechanical behavior. By using a reverse algorithm method, the elasto-plastic mechanical properties of different microconstituents were determined. This was done through the analysis of instrumented nanoindentation loading-penetration curves. Tensile properties of the thermomechanical processed steels were measured by tensile testing of subsized specimens cut from samples processed on the Gleeble®3S50. The comparison between the experimental results and those of the reverse algorithm and the OOF modeled microstructure showed quite good agreement.

Acute Hepatic Allograft Rejection in Pediatric Recipients: Independent Factors

OpenAIRE

Dehghani, S. M.; Shahramian, I.; Afshari, M.; Bahmanyar, M.; Ataollahi, M.; Sargazi, A.

2017-01-01

Background: Acute cellular rejection (ACR) has a reversible effect on graft and its survival. Objective: To evaluate the relation between ACR and clinical factors in recipients of liver transplant allografts. Methods: 47 consecutive liver recipients were retrospectively studied. Their data were extracted from records and analyzed. Results: 38 (81%) of the 47 recipients experienced ACR during a 24-month follow-up. The rate of rejection was associated with none of the studied factors—recipient’...

Multi-solution processes of small molecule for flexible white organic light-emitting diodes

Energy Technology Data Exchange (ETDEWEB)

Tsai, Yu-Sheng, E-mail: ystsai@nfu.edu.tw [Institute of Electro-optical and Materials Science, National Formosa University, Yunlin 63201, Taiwan, ROC (China); Chittawanij, Apisit; Hong, Lin-Ann; Guo, Siou-Wei [Institute of Electro-optical and Materials Science, National Formosa University, Yunlin 63201, Taiwan, ROC (China); Wang, Ching-Chiun [Department of Solid State Lighting Technology, Mechanical and Systems Research Laboratories, Industrial Technology Research Institute, Hsinchu 31040, Taiwan, ROC (China); Juang, Fuh-Shyang [Institute of Electro-optical and Materials Science, National Formosa University, Yunlin 63201, Taiwan, ROC (China); Lai, Shih-Hsiang [Department of Solid State Lighting Technology, Mechanical and Systems Research Laboratories, Industrial Technology Research Institute, Hsinchu 31040, Taiwan, ROC (China); Lin, Yang-Ching [Institute of Electro-optical and Materials Science, National Formosa University, Yunlin 63201, Taiwan, ROC (China)

2016-04-01

Most small molecule organic light emitting diode (SM-OLED) device structures are made in one layer using solution-based processing because the solution is usually a high dissolvent material that easily attacks the layer below it. We demonstrate a simple and reliable stamping technique for fabricating multi-solution process flexible white SM-OLEDs. The structure is anode/spin-hole injection layer/spin-emitting layer/stamping-electron transport layer/cathode. Poly(di-methyl silane) (PDMS) stamp is used for transferring electron transport layer. An intermediate ultraviolet-ozone surface treatment is introduced to temporarily modify the PDMS stamp surface. Then, the solution-based electron transport layer film can therefore be uniformly formed on top of the PDMS surface. After that the electron transport layer film on the PDMS stamp is transfer-printed onto the emitting layer with suitable heating and pressing. A solution-based processing is successfully established to efficiently fabricate flexible white SM-OLEDs. The SM-OLEDs were obtained at the current density of 20 mA/cm{sup 2}, luminance of 1062 cd/m{sup 2}, current efficiency of 5.57 cd/A, and Commission internationale de l'éclairage coordinate of (0.32, 0.35). - Highlights: • All solution-processed small molecule materials (emitting layer, electron transport layer). • Poly(di-methylsilane) (PDMS) stamp is subsequently used for stamping transfer. • The flexible white SM-OLEDs are based on solution-processes with a low-cost method.

Multi-solution processes of small molecule for flexible white organic light-emitting diodes

International Nuclear Information System (INIS)

Tsai, Yu-Sheng; Chittawanij, Apisit; Hong, Lin-Ann; Guo, Siou-Wei; Wang, Ching-Chiun; Juang, Fuh-Shyang; Lai, Shih-Hsiang; Lin, Yang-Ching

2016-01-01

Most small molecule organic light emitting diode (SM-OLED) device structures are made in one layer using solution-based processing because the solution is usually a high dissolvent material that easily attacks the layer below it. We demonstrate a simple and reliable stamping technique for fabricating multi-solution process flexible white SM-OLEDs. The structure is anode/spin-hole injection layer/spin-emitting layer/stamping-electron transport layer/cathode. Poly(di-methyl silane) (PDMS) stamp is used for transferring electron transport layer. An intermediate ultraviolet-ozone surface treatment is introduced to temporarily modify the PDMS stamp surface. Then, the solution-based electron transport layer film can therefore be uniformly formed on top of the PDMS surface. After that the electron transport layer film on the PDMS stamp is transfer-printed onto the emitting layer with suitable heating and pressing. A solution-based processing is successfully established to efficiently fabricate flexible white SM-OLEDs. The SM-OLEDs were obtained at the current density of 20 mA/cm"2, luminance of 1062 cd/m"2, current efficiency of 5.57 cd/A, and Commission internationale de l'éclairage coordinate of (0.32, 0.35). - Highlights: • All solution-processed small molecule materials (emitting layer, electron transport layer). • Poly(di-methylsilane) (PDMS) stamp is subsequently used for stamping transfer. • The flexible white SM-OLEDs are based on solution-processes with a low-cost method.

Experimental analysis of electro-pneumatic optimization of hot stamping machine control systems with on-delay timer

OpenAIRE

Bankole I. Oladapo; Vincent A. Balogun; Adeyinka O.M. Adeoye; Ige E. Olubunmi; Samuel O. Afolabi

2017-01-01

The sustainability criterion in the manufacturing industries is imperative, especially in the automobile industries. Currently, efforts are being made by the industries to mitigate CO2 emission by the total vehicle weight optimization, machine utilization and resource efficiency. In lieu of this, it is important to understudy the manufacturing machines adopted in the automobile industries. One of such machine is the hot stamping machine that is used for about 35% of the manufacturing operatio...

45 CFR 1643.5 - Recipient policies and recordkeeping.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Recipient policies and recordkeeping. 1643.5 Section 1643.5 Public Welfare Regulations Relating to Public Welfare (Continued) LEGAL SERVICES CORPORATION RESTRICTION ON ASSISTED SUICIDE, EUTHANASIA, AND MERCY KILLING § 1643.5 Recipient policies and...

Recipient characteristics and morbidity and mortality after liver transplantation.

Science.gov (United States)

Asrani, Sumeet K; Saracino, Giovanna; O'Leary, Jacqueline G; Gonzales, Stevan; Kim, Peter T; McKenna, Greg J; Klintmalm, Goran; Trotter, James

2018-02-15

Over the last decade, liver transplantation of sicker, older non-hepatitis C cirrhotics with multiple co-morbidities has increased in the United States. We sought to identify an easily applicable set of recipient factors among HCV negative adult transplant recipients associated with significant morbidity and mortality within five years after liver transplantation. We collected national (n = 31,829, 2002-2015) and center-specific data. Coefficients of relevant recipient factors were converted to weighted points and scaled from 0-5. Recipient factors associated with graft failure included: ventilator support (five patients; hazard ratio [HR] 1.59; 95% CI 1.48-1.72); recipient age >60 years (three patients; HR 1.29; 95% CI 1.23-1.36); hemodialysis (three patients; HR 1.26; 95% CI 1.16-1.37); diabetes (two patients; HR 1.20; 95% CI 1.14-1.27); or serum creatinine ≥1.5 mg/dl without hemodialysis (two patients; HR 1.15; 95% CI 1.09-1.22). Graft survival within five years based on points (any combination) was 77.2% (0-4), 69.1% (5-8) and 57.9% (>8). In recipients with >8 points, graft survival was 42% (model for end-stage liver disease [MELD] score recipients receiving grafts from donors with a donor risk index >1.7. In center-specific data within the first year, subjects with ≥5 points (vs. 0-4) had longer hospitalization (11 vs. 8 days, p need to be reassessed. The proposed clinical tool may be helpful for center-specific assessment of risk of graft failure in non-HCV patients and for discussion regarding relevant morbidity in selected subsets. Over the last decade, liver transplantation of sicker, older patient with multiple co-morbidities has increased. In this study, we show that a set of recipient factors (recipient age >60 years, ventilator status, diabetes, hemodialysis and creatinine >1.5 mg/dl) can help identify patients that may not do well after transplant. Transplanting sicker organs in patients with certain combinations of these

Cancer Incidence among Heart, Kidney, and Liver Transplant Recipients in Taiwan.

Science.gov (United States)

Lee, Kwai-Fong; Tsai, Yi-Ting; Lin, Chih-Yuan; Hsieh, Chung-Bao; Wu, Sheng-Tang; Ke, Hung-Yen; Lin, Yi-Chang; Lin, Feng-Yen; Lee, Wei-Hwa; Tsai, Chien-Sung

2016-01-01

Population-based evidence of the relative risk of cancer among heart, kidney, and liver transplant recipients from Asia is lacking. The Taiwan National Health Insurance Research Database was used to conduct a population-based cohort study of transplant recipients (n = 5396), comprising 801 heart, 2847 kidney, and 1748 liver transplant recipients between 2001 and 2012. Standardized incidence ratios and Cox regression models were used. Compared with the general population, the risk of cancer increased 3.8-fold after heart transplantation, 4.1-fold after kidney transplantation and 4.6-fold after liver transplantation. Cancer occurrence showed considerable variation according to transplanted organs. The most common cancers in all transplant patients were cancers of the head and neck, liver, bladder, and kidney and non-Hodgkin lymphoma. Male recipients had an increased risk of cancers of the head and neck and liver, and female kidney recipients had a significant risk of bladder and kidney cancer. The adjusted hazard ratio for any cancer in all recipients was higher in liver transplant recipients compared with that in heart transplant recipients (hazard ratio = 1.5, P = .04). Cancer occurrence varied considerably and posttransplant cancer screening should be performed routinely according to transplanted organ and sex.

Deterministic transfer of two-dimensional materials by all-dry viscoelastic stamping

International Nuclear Information System (INIS)

Castellanos-Gomez, Andres; Buscema, Michele; Molenaar, Rianda; Singh, Vibhor; Janssen, Laurens; Van der Zant, Herre S J; Steele, Gary A

2014-01-01

The deterministic transfer of two-dimensional crystals constitutes a crucial step towards the fabrication of heterostructures based on the artificial stacking of two-dimensional materials. Moreover, controlling the positioning of two-dimensional crystals facilitates their integration in complex devices, which enables the exploration of novel applications and the discovery of new phenomena in these materials. To date, deterministic transfer methods rely on the use of sacrificial polymer layers and wet chemistry to some extent. Here, we develop an all-dry transfer method that relies on viscoelastic stamps and does not employ any wet chemistry step. This is found to be very advantageous to freely suspend these materials as there are no capillary forces involved in the process. Moreover, the whole fabrication process is quick, efficient, clean and it can be performed with high yield. (letter)

Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

Science.gov (United States)

Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

2016-12-01

Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

Interview with Abel Prize Recipient Lennart Carleson

DEFF Research Database (Denmark)

Raussen, Martin; Skau, Christian

2008-01-01

Lennart Carleson was the recipient of the 2006 Abel Prize. On May 22, 2006, prior to the Abel Prize celebration in Oslo, Carleson was interviewed. The interview was later shown on Norwegian television.......Lennart Carleson was the recipient of the 2006 Abel Prize. On May 22, 2006, prior to the Abel Prize celebration in Oslo, Carleson was interviewed. The interview was later shown on Norwegian television....

Urinary tract infection in kidney transplant recipients.

Science.gov (United States)

Chacón-Mora, Natalia; Pachón Díaz, Jerónimo; Cordero Matía, Elisa

2017-04-01

Infectious complications remain a major cause of morbidity and mortality among transplant recipients. Urinary tract infection (UTI) is the most common infectious complication in kidney transplant recipients with a reported incidence from 25% to 75%, varies widely likely due to differences in definition, diagnostic criteria, study design, and length of observation. We sought reviews the incidence and importance of urinary tract infection on graft survival, the microbiology with special emphasis on multidrug resistant microorganisms, the therapeutic management of UTI and the prophylaxis of recurrent UTI among solid organ transplant recipients, highlighting the need for prospective clinical trials to unify the clinical management in this population. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

MUSIC APPRECIATION AND TRAINING FOR COCHLEAR IMPLANT RECIPIENTS: A REVIEW

Science.gov (United States)

Looi, Valerie; Gfeller, Kate; Driscoll, Virginia

2012-01-01

In recent years, there has been increasing interest in music perception of cochlear implant (CI) recipients, and a growing body of research conducted in this area. The majority of these studies have examined perceptual accuracy for pitch, rhythm, and timbre. Another important, but less commonly studied aspect of music listening is appreciation, or appraisal. Despite the ongoing research into potential technological improvements that may improve music perception for recipients, both perceptual accuracy and appreciation generally remain poor for most recipients. Whilst perceptual accuracy for music is important, appreciation and enjoyment also warrants research as it also contributes to clinical outcomes and perceived benefits. Music training is being shown to offer excellent potential for improving music perception and appreciation for recipients. Therefore, the primary topics of this review are music appreciation and training. However, a brief overview of the psychoacoustic, technical, and physiological factors associated with a recipient’s perception of music is provided, as these are important factors in understanding the listening experience for CI recipients. The purpose of this review is to summarize key papers that have investigated these issues, in order to demonstrate that i) music enjoyment and appraisal is an important and valid consideration in evaluating music outcomes for recipients, and ii) that music training can improve music listening for many recipients, and is something that can be offered to persons using current technology. PMID:23459244

Food Safety Knowledge and Practices of Older Adult Participants of the Food Stamp Nutrition Education Program

OpenAIRE

Rasnake, Crystal Michelle

2000-01-01

The purpose of this study was to determine food safety knowledge and practices of older adult participants in the Food Stamp Nutrition Education Program (FSNEP) in Virginia. One hundred and sixty-five FSNEP participants were assigned to two possible intervention groups, group one received the food safety lesson from the Healthy Futures Series currently used in FSNEP, while group two received the food safety lesson plus an additional food safety video. FSNEP participants completed food safet...

Association Between Pretransplant Cancer and Survival in Kidney Transplant Recipients.

Science.gov (United States)

Dahle, Dag Olav; Grotmol, Tom; Leivestad, Torbjørn; Hartmann, Anders; Midtvedt, Karsten; Reisæter, Anna V; Mjøen, Geir; Pihlstrøm, Hege K; Næss, Hege; Holdaas, Hallvard

2017-10-01

Kidney transplantation in recipients with a previous malignancy is often deferred 2 to 5 years after cancer treatment due to fear of cancer recurrence. In Norway, the required waiting period has been 1 year. We compared patient and graft survival of recipients with pretransplant cancer to the outcomes of matched recipients without such cancer (comparators) using Cox regression. From 1963 to 2010, 377 (6.4%) of 5867 recipients had a pretransplant cancer. During a median follow-up of 6.8 years, 256 recipients died, 35 (13.7%) from recurrent cancer and 27 (10.5%) from de novo cancer. Uncensored and death-censored graft loss occurred in 263 and 46 recipients, respectively. All-cause mortality was similar as in comparators (hazard ratio [HR], 1.06; 95% confidence interval [CI], 0.93-1.20]; P = 0.40), death-censored graft loss was lower (HR, 0.63; 95% CI, 0.47-0.84; P = 0.002), and uncensored graft loss was similar (HR, 0.99; 95% CI, 0.87-1.12; P = 0.87). Cancer mortality was higher than in comparators (HR, 1.97; 95% CI, 1.51-2.56; P cancer mortality or all-cause mortality (both P > 0.45). Results were similar within cancer subgroups, with most data in patients with a history of kidney cancer, prostate cancer, urothelial cancer, and skin squamous cell carcinoma. Kidney transplant recipients with a pretransplant cancer had a similar overall patient and graft survival as recipients without such cancer. Cancer mortality was increased, particularly during the first 5 years after transplantation. A short waiting period was not associated with mortality.

20 CFR 416.1333 - Termination at the request of the recipient.

Science.gov (United States)

2010-04-01

.... 416.1333 Section 416.1333 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY... request of the recipient. A recipient, his legal guardian, or his representative payee, may terminate his... would result if an eligible recipient were not covered by the supplemental security income program. When...

Transversus abdominis plane block in renal allotransplant recipients: A retrospective chart review.

Science.gov (United States)

Gopwani, S R; Rosenblatt, M A

2016-01-01

The efficacy of the transversus abdominis plane (TAP) block appears to vary considerably, depending on the surgical procedure and block technique. This study aims to add to the existing literature and provide a more clear understanding of the TAP blocks role as a postoperative analgesic technique, specifically in renal allotransplant recipients. A retrospective chart review was conducted by querying the intraoperative electronic medical record system of a 1200-bed tertiary academic hospital over a 5 months period, and reviewing anesthetic techniques, as well as postoperative morphine equivalent consumption. Fifty renal allotransplant recipients were identified, 13 of whom received TAP blocks while 37 received no regional analgesic technique. All blocks were performed under ultrasound guidance, with 20 mL of 0.25% bupivacaine injected in the transversus abdominis fascial plane under direct visualization. The primary outcome was postoperative morphine equivalent consumption. Morphine consumption was compared with the two-tailed Mann-Whitney U -test. Continuous variables of patient baseline characteristics were analyzed with unpaired t -test and categorical variables with Fischer Exact Test. A P consumption was found in the group that received the TAP block at 6 h (2.46 mg vs. 7.27 mg, P = 0.0010), 12 h (3.88 mg vs. 10.20 mg, P = 0.0005), 24 h (6.96 mg vs. 14.75 mg, P = 0.0013), and 48 h (11 mg vs. 20.13 mg, P = 0.0092). The TAP block is a beneficial postoperative analgesic, opiate-sparing technique in renal allotransplant recipients.

Tuberculosis in a renal allograft recipient presenting with intussusception.

Science.gov (United States)

Mohapatra, A; Basu, G; Sen, I; Asirvatham, R; Michael, J S; Pulimood, A B; John, G T

2012-01-01

Extra-pulmonary tuberculosis (TB) is more common in renal allograft recipients and may present with dissemination or an atypical features. We report a renal allograft recipient with intestinal TB presenting 3 years after transplantation with persistent fever, weight loss, diarrhea, abdominal pain and mass in the abdomen with intestinal obstruction. He was diagnosed to be having an ileocolic intussusception which on resection showed a granulomatous inflammation with presence of acid-fast bacilli (AFB) typical of Mycobacterium tuberculosis. In addition, AFB was detected in the tracheal aspirate, indicating dissemination. He received anti-TB therapy (ATT) from the fourth postoperative day. However, he developed a probable immune reconstitution inflammatory syndrome (IRIS) with multiorgan failure and died on 11(th) postoperative day. This is the first report of intestinal TB presenting as intussusception in a renal allograft recipient. The development of IRIS after starting ATT is rare in renal allograft recipients. This report highlights the need for a high index of suspicion for diagnosing TB early among renal transplant recipients and the therapeutic dilemma with overwhelming infection and development of IRIS upon reduction of immunosuppression and starting ATT.

Antibody induction therapy for lung transplant recipients

DEFF Research Database (Denmark)

Penninga, Luit; Møller, Christian H; Penninga, Ida Elisabeth Irene

2013-01-01

Lung transplantation has become a valuable and well-accepted treatment option for most end-stage lung diseases. Lung transplant recipients are at risk of transplanted organ rejection, and life-long immunosuppression is necessary. Clear evidence is essential to identify an optimal, safe and effect...... and effective immunosuppressive treatment strategy for lung transplant recipients. Consensus has not yet been achieved concerning use of immunosuppressive antibodies against T-cells for induction following lung transplantation....

Perceptions of donors and recipients regarding blood donation.

Science.gov (United States)

Conceição, Vander Monteiro da; Araújo, Jeferson Santos; Oliveira, Rafaela Azevedo Abrantes de; Santana, Mary Elizabeth de; Zago, Márcia Maria Fontão

2016-01-01

The aim of this study was to identify the perceptions of blood donors and recipients regarding the act of donating blood. This descriptive study with a survey design focuses on subjective and cultural aspects. Twenty donors and 20 recipients in the blood bank at the time of data collection participated in the study. Interviews were analyzed according to deductive thematic analysis. Two themes emerged - perceptions of donors and perceptions of recipients. Both groups saw the act of donating blood as something positive, though donors associated their reports with the experiences of people close to them who needed blood transfusions, while the recipients associated donations with the maintenance of their lives as, for them, a blood transfusion was a necessary medical treatment. Perceptions regarding blood donations are culturally constructed, as the participants associated knowledge acquired in the social world with moral issues and their life experiences. Hence, in addition to helping others, these individuals feel socially and morally rewarded. Copyright © 2016 Associação Brasileira de Hematologia, Hemoterapia e Terapia Celular. Published by Elsevier Editora Ltda. All rights reserved.

Graft Growth and Podocyte Dedifferentiation in Donor-Recipient Size Mismatch Kidney Transplants.

Science.gov (United States)

Müller-Deile, Janina; Bräsen, Jan Hinrich; Pollheimer, Marion; Ratschek, Manfred; Haller, Hermann; Pape, Lars; Schiffer, Mario

2017-10-01

Kidney transplantation is the treatment choice for patients with end-stage renal diseases. Because of good long-term outcome, pediatric kidney grafts are also accepted for transplantation in adult recipients despite a significant mismatch in body size and age between donor and recipient. These grafts show a remarkable ability of adaptation to the recipient body and increase in size in a very short period, presumably as an adaptation to hyperfiltration. We investigated renal graft growth as well as glomerular proliferation and differentiation markers Kiel-67, paired box gene 2 and Wilms tumor protein (WT1) expression in control biopsies from different transplant constellations: infant donor for infant recipient, infant donor for child recipient, infant donor for adult recipient, child donor for child recipient, child donor for adult recipient, and adult donor for an adult recipient. We detected a significant increase in kidney graft size after transplantation in all conditions with a body size mismatch, which was most prominent when an infant donated for a child. Podocyte WT1 expression was comparable in different transplant conditions, whereas a significant increase in WT1 expression could be detected in parietal epithelial cells, when a kidney graft from a child was transplanted into an adult. In kidney grafts that were relatively small for the recipients, we could detect reexpression of podocyte paired box gene 2. Moreover, the proliferation marker Kiel-67 was expressed in glomerular cells in grafts that increased in size after transplantation. Kidney grafts rapidly adapt to the recipient size after transplantation if they are transplanted in a body size mismatch constellation. The increase in transplant size is accompanied by an upregulation of proliferation and dedifferentiation markers in podocytes. The different examined conditions exclude hormonal factors as the key trigger for this growth so that most likely hyperfiltration is the key trigger inducing the

7 CFR 1486.406 - Will CCC make advance payments to Recipients?

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Will CCC make advance payments to Recipients? 1486... PROGRAM Contributions and Reimbursements § 1486.406 Will CCC make advance payments to Recipients? (a... may make advance payments to a Recipient against an approved project budget. Up to 40 percent of the...

ABOUT THE RELATIONSHIP BETWEEN THE ISSUES SIGN OF LANGUAGE SYSTEM AND STAMP OF LANGUAGE SYSTEM DİLİN İŞARET SİSTEMİYLE DİLİN DAMGA SİSTEMİ ARASINDAKİ MESELELERİN İLİŞKİSİ HAKKINDA

Directory of Open Access Journals (Sweden)

Bekmağanbetov ŞANJARHAN

2012-01-01

Full Text Available In this article, it is elaborated that ‘stamp system’ which is considered as one of basic issues of linguistics. Stamps of language and some particular features of these stamps are mentioned. In Turkish consideration, there are dimension, size of stamp and the stamp’s being profound and substantive. In modern linguistics, notion of stamp is used instead of notion znak ‘symbol’ in Russian, and notion sign ‘sign’ in English. In the article, after the explanation of the notion of UP (flat universe emerged with worldly basis, it is made mention that language is all associated with the stamp system(s. Bu makalede, genel dil bilimin temel konularından biri kabul edilen dilin ‘damga sistemi’ üzerinde durulmuştur. Dil damgalarından ve bu damgaların belli özelliklerinden söz edilmiştir. Türk’ün düşüncesinde damganın genişliği, büyüklüğü, derin ve anlamlı oluşu vardır. Çağdaş dil biliminde damga kavramı, Rusçada znak ‘simge’, İngilizcede sign ‘işaret’ kavramının yerine kullanılmaktadır. Makalede, dünyevî temel ile ortaya çıkan UP (âlem daire kavramı açıklandıktan sonra dilin damga/lar sistemi üzerine oturtulduğundan söz edilmiştir.

Recipient design in human communication: simple heuristics or perspective taking?

Science.gov (United States)

Blokpoel, Mark; van Kesteren, Marlieke; Stolk, Arjen; Haselager, Pim; Toni, Ivan; van Rooij, Iris

2012-01-01

Humans have a remarkable capacity for tuning their communicative behaviors to different addressees, a phenomenon also known as recipient design. It remains unclear how this tuning of communicative behavior is implemented during live human interactions. Classical theories of communication postulate that recipient design involves perspective taking, i.e., the communicator selects her behavior based on her hypotheses about beliefs and knowledge of the recipient. More recently, researchers have argued that perspective taking is computationally too costly to be a plausible mechanism in everyday human communication. These researchers propose that computationally simple mechanisms, or heuristics, are exploited to perform recipient design. Such heuristics may be able to adapt communicative behavior to an addressee with no consideration for the addressee's beliefs and knowledge. To test whether the simpler of the two mechanisms is sufficient for explaining the "how" of recipient design we studied communicators' behaviors in the context of a non-verbal communicative task (the Tacit Communication Game, TCG). We found that the specificity of the observed trial-by-trial adjustments made by communicators is parsimoniously explained by perspective taking, but not by simple heuristics. This finding is important as it suggests that humans do have a computationally efficient way of taking beliefs and knowledge of a recipient into account.

Recipient design in human communication: Simple heuristics or perspective taking?

Directory of Open Access Journals (Sweden)

Mark eBlokpoel

2012-09-01

Full Text Available Humans have a remarkable capacity for tuning their communicative behaviors to different addressees, a phenomenon also known as recipient design. It remains unclear how this tuning of communicative behavior is implemented during live human interactions. Classical theories of communication postulate that recipient design involves perspective taking, i.e., the communicator selects her behavior based on her hypotheses about beliefs and knowledge of the recipient. More recently, researchers have argued that perspective taking is computationally too costly to be a plausible mechanism in everyday human communication. These researchers propose that computationally simple mechanisms, or heuristics, are exploited to perform recipient design. Such heuristics may be able to adapt communicative behavior to an addressee with no consideration for the addressee's beliefs and knowledge. To test whether the simpler of the two mechanisms is sufficient for explaining the `how' of recipient design we studied communicators' behaviors in the context of a non-verbal communicative task (the Tacit Communication Game, TCG. We found that the specificity of the observed trial-by-trial adjustments made by communicators is parsimoniously explained by perspective taking, but not by simple heuristics. This finding is important as it suggests that humans do have a computationally efficient way of taking beliefs and knowledge of a recipient into account.

Profiles of blood and blood component transfusion recipients in Zimbabwe

Science.gov (United States)

Mafirakureva, Nyashadzaishe; Khoza, Star; Hassall, Oliver; Faragher, Brian E.; Kajja, Isaac; Mvere, David A.; Emmanuel, Jean C.; Postma, Maarten J.; van Hulst, Marinus

2015-01-01

Background There are limited published data on the characteristics of blood transfusion recipients in sub-Saharan Africa. This study describes the demographic characteristics of blood transfusion recipients and patterns of blood and blood component use in Zimbabwe. Materials and methods Data on the characteristics of the blood transfusion recipients (age, sex, blood group), blood components received (type, quantity), discharge diagnoses and outcomes following transfusion (discharge status, duration of stay in hospital), were retrospectively collected from four major hospitals for the period from January 1, 2012 to December 31, 2012. Diagnoses were grouped into broad categories according to the disease headings of the International Classification of Diseases (ICD-10). Surgical procedures were grouped into broad categories according to organ system using ICD-9. Results Most of the 1,793 transfusion recipients studied were female (63.2%) and in the reproductive age group, i.e. 15–49 years (65.3%). The median age of the recipients was 33 years (range, 0–93). The majority of these recipients (n=1,642; 91.6%) received a red blood cell transfusion. The majority of the patients were diagnosed with conditions related to pregnancy and childbirth (22.3%), and diseases of blood and blood-forming organs (17.7%). The median time spent in hospital was 8 days (range, 0–214) and in-hospital mortality was 15.4%. Discussion Our sample of blood transfusion recipients were fairly young and most of them received red blood cell transfusions. The majority of patients in the reproductive age group received blood transfusions for pregnancy and childbirth-related diagnoses. PMID:26192782

Linking Welfare Recipients to Jobs: The Role of Temporary Help Agencies.

Science.gov (United States)

Bugarin, Alicia

Successful welfare reform requires quickly moving welfare recipients into jobs. Components to this challenge include the following: a poor fit between where jobs are located and where many welfare recipients live; recipients who lack experience and skills and do not know how to seek, find, or qualify for jobs; childcare and transportation needs;…

Matching donor to recipient in liver transplantation: Relevance in clinical practice.

Science.gov (United States)

Reddy, Mettu Srinivas; Varghese, Joy; Venkataraman, Jayanthi; Rela, Mohamed

2013-11-27

Achieving optimum outcomes after liver transplantation requires an understanding of the interaction between donor, graft and recipient factors. Within the cohort of patients waiting for a transplant, better matching of the donor organ to the recipient will improve transplant outcomes and benefit the overall waiting list by minimizing graft failure and need for re-transplantation. A PubMed search was conducted to identify published literature investigating the effects of donor factors such as age, gender, ethnicity, viral serology; graft factors such as size and quality, recipient factors such as age, size, gender and transplant factors such as major or minor blood group incompatibility and immunological factors. We also report technical and therapeutic modifications that can be used to manage donor-recipient mismatch identified from literature and the authors' clinical experience. Multiple donor and recipient factors impact graft survival after liver transplantation. Appropriate matching based on donor-organ-recipient variables, modification of surgical technique and innovative peri-transplant strategies can increase the donor pool by utilizing grafts from marginal donors that are traditionally turned down.

Dual Kidney Transplantation: Evaluation of Recipient Selection Criteria at Niguarda Hospital.

Science.gov (United States)

Mariani, A; Ferla, F; De Carlis, R; Rossetti, O; Covucci, E; Tripepi, M; Concone, G; Lauterio, A; Mangoni, I; De Carlis, L

2016-03-01

Dual kidney transplantation (DKT) is a largely accepted strategy to enlarge the donor pool. Niguarda Hospital started this program in December 2010, and 38 DKT have been performed. In our series, we included recipients older than those in the other series published in literature. The aim of this study was to know if our recipient selection criteria for DKT are safe. We reviewed our data base of DKT and analyzed recipients' medical history, surgical technique, post-operative complications, graft survival, morbidity, and mortality. We then compared our results with the literature. From December 2010 to April 2015, 38 DKT were performed in Niguarda Hospital. Delayed graft function was present in 21 recipients. Explantation of both kidneys was performed in 1 patient and explantation of 1 kidney in 6 patients. Post-operative complications were present in 8 patients. Five patients returned to hemodialysis after DKT. One recipient died of medical post-operative sepsis. The mean follow-up was 24 months. Graft survival and patient survival were 86.84% and 97.93%, respectively. Compared with the literature, our series had similar mortality and morbidity rates, even if recipients' age was higher than in other series. The strategy of DKT allocation in elderly recipients is safe. Further studies have to be performed to optimized selection of the recipients for DKT not to disadvantage younger patients in the transplant waiting list and to improve the technique of organ evaluation and preservation to refine graft allocation. Copyright © 2016 Elsevier Inc. All rights reserved.

Depicted welfare-recipient stereotypes in Norway and Denmark

DEFF Research Database (Denmark)

Dencker-Larsen, Sofie; Lundberg, Kjetil G.

2016-01-01

Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

Depicted welfare recipient stereotypes in Norway and Denmark

DEFF Research Database (Denmark)

Dencker-Larsen, Sofie; Lundberg, Kjetil G.

2016-01-01

Welfare recipients are continuously subjected to media debates and governmental campaigns drawing on images and symbols encouraging improved work ethic and individual responsibility. Only few studies, however, have analysed how welfare recipients as ‘othered’ citizens react to these often...... stereotypical symbols and images targeting them. In this study we have investigated how welfare recipients in Norway and Denmark, and caseworkers in Denmark, understand and account for images which, through the use of stereotypes, directly or indirectly may question welfare recipients’ work ethic...... and deservedness. Analysing photo-elicitation interview data, we have uncovered a variety of reactions characterized by ‘problematization’. The interviewees problematize the image and depicted stereotypes, which they link both with motif and symbols and with surrounding public debates on the work ethic...

Expanded criteria donor kidneys for younger recipients: acceptable outcomes.

Science.gov (United States)

Goplani, K R; Kute, V B; Vanikar, A V; Shah, P R; Gumber, M R; Patel, H V; Modi, P R; Trivedi, H L

2010-12-01

European senior programme (ESP) is well known for acceptable outcomes using expanded criteria donor (ECD) kidneys from donors older than 65 years for recipients older than 65 years. The incidence of end-stage renal disease (ESRD) is 229/million in India with a mean age of 45 years. We performed a retrospective analysis of transplantation of ECD versus standard criteria donor (SCD) kidneys into younger recipients. Forty-three ECD transplantations among 158 deceased donor organ transplantation (DDOT) were performed between January 2006 and December 2009. Among 43 transplantation from 30 donors, 14 were dual kidney transplantations (DKT) performed based upon biopsy evaluation. All recipients received thymoglobulin (rATG) induction followed by immunosuppression with a steroid, mycophenolate mofetil (MMF), and a calcineurin inhibitor. Statistical analysis used chi-square test and unpaired Student t test. Kaplan-Meier curves were used for survival analysis. For ECD the mean donor age was 64 ± 11 years. Cerebrovascular accidents (CVA) were the cause of death among 60% of donors, 73.13% of whom were hypertensive and 23.13% diabetic. Mean DKT donor age was 75 ± 9.17 years versus 60 ± 8.0 years for single kidney transplantation (SKT). Mean recipient age of DKT versus SKT was 44 ± 12.4 years versus 43 ± 14 years. Mean serum creatinine (SCr; mg/dL) of SKT patients was 1.64 ± 0.75 versus 1.68 ± 0.46 in DKT. Mean follow-up was 455 ± 352 days. Mean SCr of 43 ECD recipients of mean age, 43.4 ± 14.2 years was 1.61 ± 0.61 mg/dL. Among 43 recipients, 23.25% were diabetic, 41.86% displayed delayed graft function (DGF), and 23.25% experienced biopsy-proven acute rejection (BPAR). Patient survival rate was 72.09% and graft survival rate was 67.44%. For SCD transplantations (n = 115), the mean donor age was 36 ± 14 years and recipient mean age was 32.8 ± 14.07 years. Mean SCr was 1.32 ± 0.46 mg/dL with 26.95% recipients displaying DGF, whereas 20.86% had BPAR. In the SCD

The Institutional Logic of Images of the Poor and Welfare Recipients

DEFF Research Database (Denmark)

Larsen, Christian Albrekt

The article investigates how the poor and welfare recipients are depicted in British, Danish and Swedish newspapers. The study was inspired by American media studies that have documented a negative stereotypic way of portraying the poor and welfare recipients; especially in the case...... they are African-Americans. The article argues that there is an institutional welfare-regime logic behind the way the poor and welfare recipients are depicted in the mass media. It is not only a matter of race. This argument is substantiated by showing that the poor and welfare recipients are a) also depicted...

Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

Science.gov (United States)

Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

2017-09-01

During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

Zonulin and iron metabolism in heart transplant recipients.

Science.gov (United States)

Przybyłowski, P; Nowak, E; Janik, L; Wasilewski, G; Kozlowska, S; Małyszko, J

2014-10-01

In patients after heart transplantation, anemia is relatively common and is associated with impaired kidney function, subclinical inflammatory state, and immunosuppressive treatment. Zonulin-prehaptoglibin-2 is newly discovered protein with poorly defined function. Hemoglobin binds haptoglobin, and this stable complex prevents oxidative stress caused by hemoglobin. Zonulin is necessary for integrity of intracellular tight junction in the gut. Taking into consideration iron metabolism, including its absorption in the gut, the aim of this study was to assess zonulin levels in heart transplant recipients and their possible correlations with iron status, immunosuppressive therapy, and kidney function. The study was performed with 80 stable heart transplant recipients and 22 healthy volunteers. Zonulin, iron status, and inflammatory markers were assessed with the use of commercially available kits. Zonulin correlated with intraventricular diameter (r = 0.30; P zonulin and iron status. Zonulin was significantly lower in heart transplant recipients than in healthy volunteers (P zonulin level. Zonulin, despite its effect on the absorption of different nutrients and other substances and hypothethic role in oxidative stress, seems not to play a role in the pathogenesis of anemia in heart transplant recipients. Its physiologic role remains obscure.

Graft Growth and Podocyte Dedifferentiation in Donor-Recipient Size Mismatch Kidney Transplants

Directory of Open Access Journals (Sweden)

Janina Müller-Deile, MD

2017-10-01

Full Text Available Background. Kidney transplantation is the treatment choice for patients with end-stage renal diseases. Because of good long-term outcome, pediatric kidney grafts are also accepted for transplantation in adult recipients despite a significant mismatch in body size and age between donor and recipient. These grafts show a remarkable ability of adaptation to the recipient body and increase in size in a very short period, presumably as an adaptation to hyperfiltration. Methods. We investigated renal graft growth as well as glomerular proliferation and differentiation markers Kiel-67, paired box gene 2 and Wilms tumor protein (WT1 expression in control biopsies from different transplant constellations: infant donor for infant recipient, infant donor for child recipient, infant donor for adult recipient, child donor for child recipient, child donor for adult recipient, and adult donor for an adult recipient. Results. We detected a significant increase in kidney graft size after transplantation in all conditions with a body size mismatch, which was most prominent when an infant donated for a child. Podocyte WT1 expression was comparable in different transplant conditions, whereas a significant increase in WT1 expression could be detected in parietal epithelial cells, when a kidney graft from a child was transplanted into an adult. In kidney grafts that were relatively small for the recipients, we could detect reexpression of podocyte paired box gene 2. Moreover, the proliferation marker Kiel-67 was expressed in glomerular cells in grafts that increased in size after transplantation. Conclusions. Kidney grafts rapidly adapt to the recipient size after transplantation if they are transplanted in a body size mismatch constellation. The increase in transplant size is accompanied by an upregulation of proliferation and dedifferentiation markers in podocytes. The different examined conditions exclude hormonal factors as the key trigger for this growth so that

Aid Allocation across Sectors: Does aid fit well with recipients' development priorities?

OpenAIRE

KASUGA Hidefumi

2008-01-01

This paper investigates whether aid flows to developing countries fit well with their development priorities. In particular, we examine aid allocation across sectors in a given recipient country by using sectoral data on aid and indicators that measure the recipient's need for aid in each sector. The data show that inter-recipient aid allocation reflects the recipient's need. However, we found no evidence that inter-sectoral allocation fits with national priorities except in high- and middle-...

Recipient government control under pressure

DEFF Research Database (Denmark)

Jansson, Johanna

This paper seeks to contribute to ongoing debates around African countries‟ relations to their external partners. It explores the notion of recipient government control, here defined as the extent to which a recipient government is able to ensure that the outcome of negotiations with its external...... things, cited concerns for debt sustainability. The paper argues that in the early stages of negotiations with China during 2007-2008, the Congolese government exercised control in the sense that the 2008 version of the Sicomines agreement made sizeable amounts of funding available towards large...... relevance here, since it reduced its willingness to push ahead with the criticised version of the Sicomines agreement. Eventually, mid-2009, President Kabila accommodated the concerns of the traditional donors. The agreement was reduced and HIPC completion point was subsequently reached in July 2010...

Treating gout in kidney transplant recipients.

Science.gov (United States)

Baroletti, Steven; Bencivenga, Gina Ann; Gabardi, Steven

2004-06-01

To review the etiology, treatment, and preventive strategies of hyperuricemia and gout in kidney transplant recipients. Primary literature was obtained via Medline (1966-June 2003). Studies evaluating treatment and prevention of hyperuricemia and gout in kidney transplantation were considered for evaluation. English-language studies were selected for inclusion. Approximately 14,000 kidney transplantations were performed in the United States in 2003, and of those transplant recipients, nearly 13% will experience a new onset of gout. The prevalence of hyperuricemia is even greater. There are several mechanisms by which hyperuricemia and gout develop in kidney transplant recipients. Medication-induced hyperuricemia and renal dysfunction are 2 of the more common mechanisms. Prophylactic and treatment options include allopurinol, colchicine, corticosteroids, and, if absolutely necessary, nonsteroidal antiinflammatory drugs. It is generally recommended to decide whether the risks of prophylactic therapy and treatment outweigh the benefits. Often, the risk of adverse events associated with agents to treat these ailments tends to outweigh the benefits; therefore, treatment is usually reserved for symptomatic episodes of acute gout. Practitioners must also decide if changes in immunosuppressive regimens may be of benefit on a patient-by-patient basis.

Synthesis of non-ionic and ionic resins for BEP intaglio inks curing by electron-beam radiation. Annual report

International Nuclear Information System (INIS)

Bauer, B.J.; Dickens, B.

1992-01-01

The inks currently used to print US postage stamps on web presses are dried by heat evaporation of solvents. Emission of solvents into the atmosphere is governed by Local and Federal Government Regulations. Reduction of these emissions to acceptable levels can be accomplished by either of two methods available to the BEP. The work was part of a continuing effort to produce resins for use in formulation of intaglio inks for the printing of postage stamps and security documents. The inks are to be cured by exposure to an electron beam. The uncured inks are cleaned from the roller and wiping blade by washing the wiping blade with neutral water or with caustic water. Laboratory scale work on the urethane/polyethylene oxide/methacrylate resins has now been concluded and information on the synthesis has been provided to BEP for patenting and scaleup. Some effort on nonionic resins continued into FY88

Environmental Protection Agency Award Recipient Responsibilities

Science.gov (United States)

Itemized Award Phase information. Information about the Recipient's Responsibilities Upon Notification of the Award, The EPA Project Officer Responsibilities, and EPA Grant Specialists Responsibilities.

Design and implementation of a nanosecond time-stamping readout system-on-chip for photo-detectors

International Nuclear Information System (INIS)

Anvar, Shebli; Château, Frédéric; Le Provost, Hervé; Louis, Frédéric; Manolopoulos, Konstantinos; Moudden, Yassir; Vallage, Bertrand; Zonca, Eric

2014-01-01

A readout system suitable for a large number of synchronized photo-detection units has been designed. Each unit embeds a specifically designed fully integrated communicating system based on Xilinx FPGA SoC technology. It runs the VxWorks real-time OS and a custom data acquisition software designed within the Ice middleware framework, resulting in a highly flexible, controllable and scalable distributed application. Clock distribution and delay calibration over customized fixed latency gigabit Ethernet links enable synchronous time-stamping of events with nanosecond precision. The implementation of this readout system on several data-collecting units as well as its performances are described

Sirolimus use and incidence of venous thromboembolism in cardiac transplant recipients.

Science.gov (United States)

Thibodeau, Jennifer T; Mishkin, Joseph D; Patel, Parag C; Kaiser, Patricia A; Ayers, Colby R; Mammen, Pradeep P A; Markham, David W; Ring, W Steves; Peltz, Matthias; Drazner, Mark H

2012-01-01

Sirolimus is an immunosuppressive agent increasingly used in cardiac transplant recipients in the setting of allograft vasculopathy or worsening renal function. Recently, sirolimus has been associated with increased risk of venous thromboembolism (VTE) in lung transplant recipients. To investigate whether this association is also present in cardiac transplant recipients, we retrospectively reviewed the charts of 67 cardiac transplant recipients whose immunosuppressive regimen included sirolimus and 134 matched cardiac transplant recipients whose regimen did not include sirolimus. Rates of VTE were compared. Multivariable Cox proportional hazards models tested the association of sirolimus use with VTE. A higher incidence of VTE was seen in patients treated with vs. without sirolimus (8/67 [12%] vs. 9/134 [7%], log-rank statistic: 4.66, p=0.03). Lower body mass index (BMI) and total cholesterol levels were also associated with VTE (p<0.05). The association of sirolimus with VTE persisted when adjusting for BMI (hazard ratio [95% confidence interval]: 2.96 [1.13, 7.75], p=0.03) but not when adjusting for total cholesterol (p=0.08). These data suggest that sirolimus is associated with an increased risk of VTE in cardiac transplant recipients, a risk possibly mediated through comorbid conditions. Larger, more conclusive studies are needed. Until such studies are completed, a heightened level of awareness for VTE in cardiac transplant recipients treated with sirolimus appears warranted. © 2012 John Wiley & Sons A/S.

Micro-patterned ZnO semiconductors for high performance thin film transistors via chemical imprinting with a PDMS stamp.

Science.gov (United States)

Seong, Kieun; Kim, Kyongjun; Park, Si Yun; Kim, Youn Sang

2013-04-07

Chemical imprinting was conducted on ZnO semiconductor films via a chemical reaction at the contact regions between a micro-patterned PDMS stamp and ZnO films. In addition, we applied the chemical imprinting on Li doped ZnO thin films for high performance TFTs fabrication. The representative micro-patterned Li doped ZnO TFTs showed a field effect mobility of 4.2 cm(2) V(-1) s(-1) after sintering at 300 °C.

Employer Demand for Welfare Recipients by Race. Discussion Paper.

Science.gov (United States)

Holzer, Harry J.; Stoll, Michael A.

This paper uses new survey data on employers in four large metropolitan areas to examine the determinants of employer demand for welfare recipients. Data come from a telephone survey of approximately 750 establishments. Results suggest a high level of demand for welfare recipients, although such demand appears fairly sensitive to business cycle…

PREDICTIVE SIGNIFICANCE OF ANTI-HLA AUTOANTIBODIES IN HEART TRANSPLANT RECIPIENTS

Directory of Open Access Journals (Sweden)

O. P. Shevchenko

2013-01-01

Full Text Available Aim. The aim of this study was to define the role of preformed anti-HLA antibodies (anti-HLA in antibody-mediated rejection (AMR and cardiac allograft vasculopathy (CAV after heart transplantation. Materials and Methods. 140 heart transplant recipients were followed after heart transplantation performed for 106 dilated and 34 – ischemic cardiomyopathy. Anti-HLA was determined before transplantation by ELISA. Results. Recipients were divided into 2 groups: anti-HLA positive (n = 45, 32,1% and anti-HLA negative (n = 95, 67,9%. The incidence of AMR in anti-HLA positive group was 12 (26,67% and 11 (11,58% in anti-HLA negative group. Risk of AMR was significantly higher in anti-HLA positive recipients (RR 2,3: 95% CI 1,02–4,81, р = 0,03. During first three years after transplantation CAV was diagnosed in 9 (20% of anti-HLA positive recipients and in 7 (6,8% of patients without anti-HLA. (RR 2,7: 95% CI 1,08–6,82, р = 0,03. Survival in freedom from CAV in anti-HLA negative recipients was much higher than in anti-HLA positive recipients (0,89 ± 0,07, 0,72 ± 0,06, resp. (p = 0,02.Conclusions. The presence of preformed anti-HLA antibodies in candidates for heart transplantation increase the risk of AMR and CAV post transplantation in 2,3 and 2,7 times, respectively. 

Large-area fabrication of patterned ZnO-nanowire arrays using light stamping lithography.

Science.gov (United States)

Hwang, Jae K; Cho, Sangho; Seo, Eun K; Myoung, Jae M; Sung, Myung M

2009-12-01

We demonstrate selective adsorption and alignment of ZnO nanowires on patterned poly(dimethylsiloxane) (PDMS) thin layers with (aminopropyl)siloxane self-assembled monolayers (SAMs). Light stamping lithography (LSL) was used to prepare patterned PDMS thin layers as neutral passivation regions on Si substrates. (3-Aminopropyl)triethoxysilane-based SAMs were selectively formed only on regions exposing the silanol groups of the Si substrates. The patterned positively charged amino groups define and direct the selective adsorption of ZnO nanowires with negative surface charges in the protic solvent. This procedure can be adopted in automated printing machines that generate patterned ZnO-nanowire arrays on large-area substrates. To demonstrate its usefulness, the LSL method was applied to prepare ZnO-nanowire transistor arrays on 4-in. Si wafers.

Influence of p53 (rs1625895 polymorphism in kidney transplant recipients

Directory of Open Access Journals (Sweden)

Negar Azarpira

2014-01-01

Full Text Available Reperfusion injury predisposes the kidney allograft to acute rejection. Apoptosis is a mechanism that results in graft injury, and TP53 is an important involved gene. To determine the association between single nucleotide polymorphism (SNP in the pro-apoptotic protein p53 (rs1625895 and acute rejection in renal transplants, we studied 100 recipients of kidney allografts and 100 healthy individuals served as controls. The polymorphism was determined by the polymerase chain reaction restriction-fragment length polymorphism (PCR-RFLP test. Overall, 31 recipients developed rejection. There was no difference in the genotype frequencies between the recipients and the controls. However, we found a difference of genotype and allele frequencies between recipients with and those without rejection. The WW genotype was more frequent in recipients with rejection. Although rejection is a complex immunologic event and functional importance of SNPs has not been confirmed yet, we suggest that wild type p53 may promote apoptosis during inflammation.

Acute Hepatic Allograft Rejection in Pediatric Recipients: Effective Factors.

Science.gov (United States)

Dehghani, S M; Shahramian, I; Afshari, M; Bahmanyar, M; Ataollahi, M; Sargazi, A

2018-01-01

Acute cellular rejection (ACR), a reversible process, can affect the graft survival. To evaluate the relation between ACR and clinical factors in recipients of allograft liver transplantation. 47 recipients of liver were consecutively enrolled in a retrospective study. Their information were retrieved from their medical records and analyzed. Of the 47 recipients, 38 (81%) experienced acute rejection during 24 months of the transplantation. None of the studied factors for occurring transplant rejection, i.e ., blood groups, sex, age, familial history of disease, receiving drugs and blood products, type of donor, Child score, and Child class, was not found to be significant. During a limited follow-up period, we did not find any association between ACR and suspected risk factors.

Integrated Stamping Simulation Using State Of The Art Techniques To Fulfill Quality Assessment Requirements

International Nuclear Information System (INIS)

Ling, David; Lambriks, Marc; El Khaldi, Fouad

2005-01-01

The last few years have seen the use of stamping simulation evolve to the extent that it is now a mainstream activity; a core part of the press tool engineering process. Now, new requirements for the use of challenging materials like Dual phase / Complex phase steel, VHSS, and aluminum, together with more stringent quality expectations, and shorter development cycles, there is a need to assess the panel quality in a wider context, before committing to tool manufacture.The integrated approach from ESI Group allows early up-front feasibility assessment, geometry and process optimization, and detailed process validation all within one system. Rapid die design and quick forming simulation modules play an essential role in the early stages of the process. A seamless connection between simulation and geometry is a vital characteristic, with the accurate simulation being used to validate and fine tune the process in order to assess final component quality in unprecedented detail, utilizing some of the most accurate material models available today. The combination of the distributed memory processing (DMP) solver together with new cost effective cluster based compute servers provide a practical solution to the problems of 'one million element' model sizes, and more sophisticated modeling methodologies become realistic for the first time.It is no longer sufficient to merely focus on the draw die, forming simulation must now consider the entire die line up. Typically, around half of forming issues arise from the draw die, so the time has now come to address the other half as well! This paper will discuss how the PAM-STAMP 2G TM integrated solution is successfully used to deliver a positive business impact, by providing virtual panel quality assessment, tolerance control, and springback compensation. The paper will also discuss how other forming processes can be accurately modeled using the new modules

78 FR 14233 - Electronic Retirement Processing

Science.gov (United States)

2013-03-05

... as the private key, is used to verify the signature. Digitized signature means a graphical image of a... recipients of the electronic document. Smart card means a plastic card, typically the size of a credit card, containing an embedded integrated circuit or ``chip'' that can generate, store, or process data. A smart card...

Molecular appraisal of intestinal parasitic infection in transplant recipients

Directory of Open Access Journals (Sweden)

Pooja Yadav

2016-01-01

Full Text Available Background & objectives: Diarrhoea is the main clinical manifestation caused by intestinal parasitic infections in patients, with special reference to transplant recipients who require careful consideration to reduce morbidity and mortality. Further, molecular characterization of some important parasites is necessary to delineate the different modes of transmission to consider appropriate management strategies. We undertook this study to investigate the intestinal parasitic infections in transplant recipients with or without diarrhoea, and the genotypes of the isolated parasites were also determined. Methods: Stool samples from 38 transplant recipients comprising 29 post-renal, two liver and seven bone marrow transplant (BMT recipients presenting with diarrhoea and 50 transplant recipients (42 post-renal transplant, eight BMT without diarrhoea were examined for the presence of intestinal parasites by light microscopy using wet mount, modified Ziehl-Neelsen staining for intestinal coccidia and modified trichrome staining for microsporidia. Genotypes of Cryptosporidium species were determined by multilocus genotyping using small subunit ribosomal (SSUrRNA, Cryptosporidium oocyst wall protein (COWP and dihydrofolate reductase (DHFR as the target genes. Assemblage study for Giardia lamblia was performed using triose phosphate isomerase (TPI as the target gene. Samples were also screened for bacterial, fungal and viral pathogens. Results: The parasites that were detected included Cryptosporidium species (21%, 8/38, Cystoisospora (Isospora belli (8%, 3, Cyclospora cayetanensis (5%, 2, G. lamblia (11%, 4, Hymenolepis nana (11%, 4, Strongyloides stercoralis (3%, 1 and Blastocystis hominis (3%, 1. Multilocus genotyping of Cryptosporidium species at SSUrRNA, COWP and DHFR loci could detect four isolates of C. hominis; two of C. parvum, one of mixed genotype and one could not be genotyped. All the C. hominis isolates were detected in adult post

Anti-asialo GM1 antiserum treatment of lethally irradiated recipients before bone marrow transplantation: Evidence that recipient natural killer depletion enhances survival, engraftment, and hematopoietic recovery

International Nuclear Information System (INIS)

Tiberghien, P.; Longo, D.L.; Wine, J.W.; Alvord, W.G.; Reynolds, C.W.

1990-01-01

Natural killer (NK) cells are reported to have an important role in the resistance of lethally irradiated recipients to bone marrow transplantation (BMT). Therefore, we investigated the effects of recipient NK depletion on survival, chimerism, and hematopoietic reconstitution after lethal irradiation and the transplantation of limiting amounts of T-cell-deficient bone marrow (BM). When administered before BMT, anti-asialo GM1 (ASGM1) antiserum treatment, effective in depleting in vivo NK activity, was associated with a marked increase in survival in 3 of 3 allogeneic combinations (BALB/c into C3H/HeN, C57B1/6, or C3B6F1). This enhanced survival was independent of the susceptibility of each recipient strain to accept BALB/c BM. Moreover, recipient anti-ASGM1 treatment was also effective in increasing survival in recipients of syngeneic BM, suggesting that NK cells can adversely affect engraftment independent of genetically controlled polymorphic cell surface determinants. Analysis of chimerism in surviving animals 2 months post-BMT showed that recipient NK depletion significantly increased the level of donor engraftment when high doses of BM were transplanted. These studies also demonstrated that anti-ASGM1 pretreatment mainly resulted in an increase in extramedullary hematopoiesis in the second and third week after irradiation. Anti-ASGM1 treatment also dramatically accelerated the rate of appearance of donor-derived cells with a higher level of donor-cell engraftment apparent at a time when the differences in survival between NK-depleted and control BMT recipients became significant. Peripheral cell counts were also affected by NK depletion, with significantly enhanced platelet and red blood cell recovery and a moderate increase in granulocyte recovery

Anti-asialo GM1 antiserum treatment of lethally irradiated recipients before bone marrow transplantation: Evidence that recipient natural killer depletion enhances survival, engraftment, and hematopoietic recovery

Energy Technology Data Exchange (ETDEWEB)

Tiberghien, P.; Longo, D.L.; Wine, J.W.; Alvord, W.G.; Reynolds, C.W. (Program Resources, Inc., Frederick, MD (USA))

1990-10-01

Natural killer (NK) cells are reported to have an important role in the resistance of lethally irradiated recipients to bone marrow transplantation (BMT). Therefore, we investigated the effects of recipient NK depletion on survival, chimerism, and hematopoietic reconstitution after lethal irradiation and the transplantation of limiting amounts of T-cell-deficient bone marrow (BM). When administered before BMT, anti-asialo GM1 (ASGM1) antiserum treatment, effective in depleting in vivo NK activity, was associated with a marked increase in survival in 3 of 3 allogeneic combinations (BALB/c into C3H/HeN, C57B1/6, or C3B6F1). This enhanced survival was independent of the susceptibility of each recipient strain to accept BALB/c BM. Moreover, recipient anti-ASGM1 treatment was also effective in increasing survival in recipients of syngeneic BM, suggesting that NK cells can adversely affect engraftment independent of genetically controlled polymorphic cell surface determinants. Analysis of chimerism in surviving animals 2 months post-BMT showed that recipient NK depletion significantly increased the level of donor engraftment when high doses of BM were transplanted. These studies also demonstrated that anti-ASGM1 pretreatment mainly resulted in an increase in extramedullary hematopoiesis in the second and third week after irradiation. Anti-ASGM1 treatment also dramatically accelerated the rate of appearance of donor-derived cells with a higher level of donor-cell engraftment apparent at a time when the differences in survival between NK-depleted and control BMT recipients became significant. Peripheral cell counts were also affected by NK depletion, with significantly enhanced platelet and red blood cell recovery and a moderate increase in granulocyte recovery.

Blood stream infections in renal transplant recipients: a single-center study.

Science.gov (United States)

Daskalaki, E; Koukoulaki, M; Bakalis, A; Papastamopoulos, V; Belesiotou, E; Perivolioti, E; Skoutelis, A; Drakopoulos, S

2014-11-01

Bacteremias among renal transplant recipients are more frequent as a result of immunosuppression. They are considered extremely high-risk because they are correlated with decreased allograft and recipient survival. All episodes of bacteremia among renal transplant recipients were documented following review of medical records, from January 2010 to May 2013. In total 26 episodes of bacteremia were observed in 22 patients. Gram negative bacteremia was identified in 73% (19/26) cases. Pathogens according to their frequency were the following Escherichia coli (6/26, 23%), Klebsiella pneumonia (5/26, 19%), Pseudomonas aeruginosa (3/26, 11%), Staphylococcus epidermidis (3/26, 11%), Acinetobacter baumanni (2/26, 7.7%), Enterococcus faecalis (2/26, 7.7%). The first trimester post renal transplantation 18 episodes (69%) of bacteremia were presented that were not correlated to indwelling urinary catheter or stent. Positive urinary culture with the same pathogen was recognized in 13 patients. All recipients manifested fever, eight recipients had leucocytosis and three cases were complicated by septic shock. Immediate resuscitation with intravenous fluids and non-nephrotoxic antibiotic regimen was initiated. Acute renal allograft dysfunction (defined as an increase in serum creatinine more than 0.5 mg/dL from baseline) was observed in five patients and was restored following infection resolution. Increased prevalence of bacteremia in renal transplant recipients is attributed to immunosuppression and usually bacteremic episodes follow urinary tract infection. The commonest pathogens are Gram negative bacteria with E. coli the most frequent. Early detection and proper management are important as bacteremia affects renal allograft and recipient survival.

Profiles of blood and blood component transfusion recipients in Zimbabwe

NARCIS (Netherlands)

Mafirakureva, Nyashadzaishe; Khoza, Star; Hassall, Oliver; Faragher, Brian E.; Kajja, Isaac; Mvere, David A.; Emmanuel, Jean C.; Postma, Maarten J.; van Hulst, Marinus

2015-01-01

Background. There are limited published data on the characteristics of blood transfusion recipients in sub-Saharan Africa. This study describes the demographic characteristics of blood transfusion recipients and patterns of blood and blood component use in Zimbabwe. Materials and methods. Data on

Cytomegalovirus disease in lung transplantation: impact of recipient seropositivity and duration of antiviral prophylaxis.

Science.gov (United States)

Hammond, S P; Martin, S T; Roberts, K; Gabardi, S; Fuhlbrigge, A L; Camp, P C; Goldberg, H J; Marty, F M; Baden, L R

2013-04-01

A recent randomized trial demonstrated that 1 year of antiviral prophylaxis for cytomegalovirus (CMV) after lung transplantation is superior to 3 months of treatment for prevention of CMV disease. However, it is uncertain if a shorter duration of prophylaxis might result in a similar rate of CMV disease among select lung transplant (LT) recipients who are at lower risk for CMV disease, based on baseline donor (D) and recipient (R) CMV serologies. We retrospectively assessed incidence, cumulative probability, and predictors of CMV disease and viremia in LT recipients transplanted between July 2004 and December 2009 at our center, where antiviral CMV prophylaxis for 6-12 months is standard. Of 129 LT recipients, 94 were at risk for CMV infection based on donor CMV seropositivity (D+) or recipient seropositivity (R+); 14 developed CMV disease (14.9%): 11 with CMV syndrome, 2 with pneumonitis, and 1 with gastrointestinal disease by the end of follow-up (October 2010); 17 developed asymptomatic CMV viremia (18.1%). The cumulative probability of CMV disease was 17.4% 18 months after transplantation. CMV D+/R- recipients who routinely received 1 year of prophylaxis were more likely to develop CMV disease compared with D+/R+ or D-/R+ recipients, who routinely received 6 months of prophylaxis (12/45 vs. 2/25 vs. 0/24, P = 0.005). Recipients who stopped CMV prophylaxis before 12 months (in D+/R- recipients) and 6 months (in R+ recipients) tended to develop CMV disease more than those who did not (9/39 vs. 3/41, P = 0.06). On a 6-month CMV prophylaxis protocol, few R+ recipients developed CMV disease in this cohort. In contrast, despite a 12-month prophylaxis protocol, D+/R- LT recipients remained at highest risk for CMV disease. © 2012 John Wiley & Sons A/S.

Incidence of carbapenem-resistant gram negatives in Italian transplant recipients: a nationwide surveillance study.

Science.gov (United States)

Lanini, Simone; Costa, Alessandro Nanni; Puro, Vincenzo; Procaccio, Francesco; Grossi, Paolo Antonio; Vespasiano, Francesca; Ricci, Andrea; Vesconi, Sergio; Ison, Michael G; Carmeli, Yehuda; Ippolito, Giuseppe

2015-01-01

Bacterial infections remain a challenge to solid organ transplantation. Due to the alarming spread of carbapenem-resistant gram negative bacteria, these organisms have been frequently recognized as cause of severe infections in solid organ transplant recipients. Between 15 May and 30 September 2012 we enrolled 887 solid organ transplant recipients in Italy with the aim to describe the epidemiology of gram negative bacteria spreading, to explore potential risk factors and to assess the effect of early isolation of gram negative bacteria on recipients' mortality during the first 90 days after transplantation. During the study period 185 clinical isolates of gram negative bacteria were reported, for an incidence of 2.39 per 1000 recipient-days. Positive cultures for gram negative bacteria occurred early after transplantation (median time 26 days; incidence rate 4.33, 1.67 and 1.14 per 1,000 recipient-days in the first, second and third month after SOT, respectively). Forty-nine of these clinical isolates were due to carbapenem-resistant gram negative bacteria (26.5%; incidence 0.63 per 1000 recipient-days). Carbapenems resistance was particularly frequent among Klebsiella spp. isolates (49.1%). Recipients with longer hospital stay and those who received either heart or lung graft were at the highest risk of testing positive for any gram negative bacteria. Moreover recipients with longer hospital stay, lung recipients and those admitted to hospital for more than 48h before transplantation had the highest probability to have culture(s) positive for carbapenem-resistant gram negative bacteria. Forty-four organ recipients died (0.57 per 1000 recipient-days) during the study period. Recipients with at least one positive culture for carbapenem-resistant gram negative bacteria had a 10.23-fold higher mortality rate than those who did not. The isolation of gram-negative bacteria is most frequent among recipient with hospital stays >48 hours prior to transplant and in those

Incidence of carbapenem-resistant gram negatives in Italian transplant recipients: a nationwide surveillance study.

Directory of Open Access Journals (Sweden)

Simone Lanini

Full Text Available Bacterial infections remain a challenge to solid organ transplantation. Due to the alarming spread of carbapenem-resistant gram negative bacteria, these organisms have been frequently recognized as cause of severe infections in solid organ transplant recipients.Between 15 May and 30 September 2012 we enrolled 887 solid organ transplant recipients in Italy with the aim to describe the epidemiology of gram negative bacteria spreading, to explore potential risk factors and to assess the effect of early isolation of gram negative bacteria on recipients' mortality during the first 90 days after transplantation. During the study period 185 clinical isolates of gram negative bacteria were reported, for an incidence of 2.39 per 1000 recipient-days. Positive cultures for gram negative bacteria occurred early after transplantation (median time 26 days; incidence rate 4.33, 1.67 and 1.14 per 1,000 recipient-days in the first, second and third month after SOT, respectively. Forty-nine of these clinical isolates were due to carbapenem-resistant gram negative bacteria (26.5%; incidence 0.63 per 1000 recipient-days. Carbapenems resistance was particularly frequent among Klebsiella spp. isolates (49.1%. Recipients with longer hospital stay and those who received either heart or lung graft were at the highest risk of testing positive for any gram negative bacteria. Moreover recipients with longer hospital stay, lung recipients and those admitted to hospital for more than 48h before transplantation had the highest probability to have culture(s positive for carbapenem-resistant gram negative bacteria. Forty-four organ recipients died (0.57 per 1000 recipient-days during the study period. Recipients with at least one positive culture for carbapenem-resistant gram negative bacteria had a 10.23-fold higher mortality rate than those who did not.The isolation of gram-negative bacteria is most frequent among recipient with hospital stays >48 hours prior to transplant

'I feel stronger and younger all the time'-perspectives of elderly kidney transplant recipients: thematic synthesis of qualitative research.

Science.gov (United States)

Pinter, Jule; Hanson, Camilla S; Craig, Jonathan C; Chapman, Jeremy R; Budde, Klemens; Halleck, Fabian; Tong, Allison

2016-09-01

Kidney transplantation offers improved survival and quality of life to an increasing number of elderly patients with end-stage kidney disease. However, elderly kidney transplant recipients may face unique challenges due to a higher burden of comorbidity, greater cumulative risk of immunosuppression-related complications and increasing frailty. We aimed to describe the perspectives of elderly kidney transplant recipients. Electronic databases were searched to April 2015. Qualitative studies were eligible if they reported views from elderly kidney transplant recipients (≥60 years). Thematic synthesis was used to analyse the findings. Twenty-one studies involving >116 recipients were included. We identified seven themes. 'Regaining strength and vitality' meant valuing the physical and psychosocial improvements in daily functioning and life participation. 'Extending life' was the willingness to accept any organ, including extended criteria kidneys, to prolong survival. 'Debt of gratitude' entailed conscious appreciation toward their donor while knowing they were unable to repay their sacrifice. 'Moral responsibility to maintain health' motivated adherence to medication and lifestyle recommendations out of an ethical duty to protect their gift for graft survival. 'Unabating and worsening forgetfulness' hindered self-management. 'Disillusionment with side effects and complications' reflected disappointment and exasperation with the unintended consequences of medications. 'Finality of treatment option' was an acute awareness that the current transplant may be their last. Kidney transplantation was perceived to slow and even reverse the experience of aging among elderly recipients, especially compared with dialysis. However, some were frustrated over persistent limitations after transplant, struggled with the burden of medication side effects and worried about a possible return to dialysis if the transplant failed. Clarifying patient expectations of transplantation

7 CFR 4280.21 - Eligible REDG Ultimate Recipients and Projects.

Science.gov (United States)

2010-01-01

... care providers; (5) Projects that utilize Advanced Telecommunications or computer networks to... 7 Agriculture 15 2010-01-01 2010-01-01 false Eligible REDG Ultimate Recipients and Projects. 4280... Economic Development Loan and Grant Programs § 4280.21 Eligible REDG Ultimate Recipients and Projects. The...

Lactobacillus rhamnosus bacteremia in a kidney transplant recipient.

Science.gov (United States)

Falci, D R; Rigatto, M H; Cantarelli, V V; Zavascki, A P

2015-08-01

Lactobacillus rhamnosus is a rare clinical pathogen. A case of bacteremia caused by L. rhamnosus in a kidney transplant recipient is described. Once considered only as a contaminant or a low-virulence organism, L. rhamnosus might be an opportunistic pathogen in immunocompromised patients. To our knowledge, this is the first report of primary bloodstream infection caused by L. rhamnosus in a kidney transplant recipient. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Demonstrating Recipiency: Knowledge Displays as a Resource for the Unaddressed Participant

OpenAIRE

Kidwell, Mardi

1997-01-01

This paper expands conversation analytic notions of recipiency by considering recipient proactivity. At issue are the methods by which an unaddressed participant of a story-in-progress makes claims on a teller's attention through a series of upgraded responses to the story. These claims range from gaze direction toward the teller, to displays of knowledge of particular story components. The recipient's displays of knowledge regarding the story provide a resource for her to elicit the teller's...

Lipid profiles of donors and recipients of liver transplant: like father like son.

Science.gov (United States)

Chu, Kevin K W; Chan, See Ching; Sin, Sui Ling; Chan, Albert C Y; Chok, Kenneth S H; Cheng, Ignatius K P; Lo, Chung Mau

2017-05-01

Dyslipidemia is common in liver transplant recipients. This retrospective study investigates whether donors play a role. Prospectively collected data of donors and recipients of deceased-donor liver transplantation (DDLT) and living-donor liver transplantation (LDLT) were reviewed. Total cholesterol, triglyceride, low-density lipoprotein, high-density lipoprotein (HDL) and fasting glucose were compared between groups. HDL ≥1.6 mmol/L at 2 years after transplant was considered the marker of a favorable post-transplant lipid profile in recipients. Univariate and multivariate analyses were performed to identify predictive factors for this marker. There were 85 DDLTs and 80 LDLTs. LDLT donors were younger (30 vs. 50 years, p index (21.2 vs. 23.7, p glucose (4.85 vs. 7.21 mmol/L, p triglyceride (0.87 vs. 1.22 mmol/L, p = 0.016) but higher HDL (1.58 vs. 1.39 mmol/L, p = 0.022). LDLT recipients also had higher HDL at 1 year (1.48 vs. 1.28 mmol/L, p = 0.026) and 2 years (1.43 vs. 1.21 mmol/L, p = 0.008). Fourteen (16.5%) DDLT recipients and 27 (33.8%) LDLT recipients had HDL ≥1.6 mmol/L at 2 years. On multivariate analysis, donor HDL ≥1.6 mmol/L (RR 4.311, 95% CI 1.666-11.158, p = 0.003) and recipient body mass index <24 (RR 2.753, 95% CI 1.064-7.127, p = 0.037) were the two independent predictive factors. LDLT recipients had better lipid profiles than DDLT recipients. The feature of high HDL level in donors was transferred to recipients.

MONITORING OF CMV INFECTION IN KIDNEY TRANSPLANT RECIPIENTS

Directory of Open Access Journals (Sweden)

Zhivka Stoykova

2017-12-01

Full Text Available Human cytomegalovirus is a ubiquitous herpesvirus that establishes lifelong latency after primary infection, but can cause life-threatening disease in immunosuppressed patients. CMV invasive disease leads to significant morbidity and mortality following kidney transplantation. We tested 2 groups of patients - Group A included 20 potential kidney recipients and 29 potential donors investigated by ELISA and Group B included 53 adult kidney transplant recipients all of them tested in ELISA and 24 of them tested in QRT-PCR for CMV-DNA from plasma samples. In group A 16 (80% of 20 potential kidney recipients were anti-CMV IgG positive and 4 (20% were anti-CMV IgG negative. Twenty eight of 29 potential donors were found seropositive, and only one was not infected. In group B overall 119 ELISA tests for specific anti-CMV antibodies were performed. Anti-CMV IgM negative was 68 (57% of the tested samples, twelve (10% showed anti-CMV IgM equivocal results and 39 samples (33% were with anti-CMV IgM positive. Seven of them (13,2% showed repeatedly anti CMV IgM positive results. All 119 (100% displayed аnti-CMV IgG positive results. Overall 41 PCR analyses from plasma samples of 24 kidney transplant recipients (group B were performed. CMV-DNA replication was detected in 5 plasma samples obtained from 3 patients (12.5% at a different time - from 20 days till almost 8 years after the transplantation. Despite the high seroprevalence to CMV 20% of the potential recipients were at high risk of primary infection when receiving a kidney from a seropositive donor. Positive serological results during the regular post-transplantation monitoring complemented with or without clinical data are indicative and require further QRT-PCR analysis.

Psychosocial functioning in pediatric heart transplant recipients and their families.

Science.gov (United States)

Cousino, Melissa K; Schumacher, Kurt R; Rea, Kelly E; Eder, Sally; Zamberlan, Mary; Jordan, Jessica; Fredericks, Emily M

2018-03-01

Across pediatric organ transplant populations, patient and family psychosocial functioning is associated with important health-related outcomes. Research has suggested that pediatric heart transplant recipients and their families are at increased risk for adverse psychosocial outcomes; however, recent investigation of psychosocial functioning in this population is lacking. This study aimed to provide a contemporary characterization of psychosocial functioning in pediatric heart transplant recipients and their families. Associations between psychosocial function, demographic variables, and transplant-related variables were investigated. Fifty-six parents/guardians of pediatric heart transplant recipients completed a comprehensive psychosocial screening measure during transplant follow-up clinic visits. Descriptive statistics, correlational analyses, and independent samples t tests were performed. Forty percent of pediatric heart transplant recipients and their families endorsed clinically meaningful levels of total psychosocial risk. One-third of patients presented with clinically significant psychological problems per parent report. Psychosocial risk was unassociated with demographic or transplant-related factors. Despite notable improvements in the survival of pediatric heart transplant recipients over the past decade, patients and families present with sustained psychosocial risks well beyond the immediate post-transplant period, necessitating mental health intervention to mitigate adverse impact on health-related outcomes. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Development of nuclear technology transfer - Korea as a recipient

International Nuclear Information System (INIS)

Sung, N.C.

1988-01-01

Korea, as a recipient of nuclear technology transfer, has good experience of progressively building up its indigenous capability of nuclear technology through three stages of technology transfer, namely: technology transfer under the turn-key approach, component approach, and integrated technology transfer with a local prime contractor. Here, each stage of experience of technology transfer, with Korea as a recipient, is presented

Nonsteroidal Anti-Inflammatory Drugs and Analgesics Use by Kidney Transplant Recipients.

Science.gov (United States)

Mulka-Gierek, Maria; Foroncewicz, Bartosz; Pączek, Leszek; Wawiórko, Elżbieta; Kamińska, Joanna; Kosieradzki, Maciej; Małkowski, Piotr; Małczuk, Bianka; Nazarewski, Sławomir; Mucha, Krzysztof

2018-03-02

BACKGROUND Nonsteroidal anti-inflammatory drugs (NSAIDs) and analgesics are the most commonly used drugs and are increasingly available over-the-counter (OTC). In certain groups of patients, including kidney transplant recipients, their use may be complicated by adverse effects or drug interactions. The aim of our study was to assess the causes and frequency of OTC NSAIDs or analgesics use, as well as the awareness of related side effects. MATERIAL AND METHODS We enrolled 94 randomly selected kidney transplant recipients, who represented 5% of all kidney transplant recipients at our center. An anonymous survey consisting of 23 multiple-choice questions was administered voluntarily and anonymously. RESULTS In all, 63% of study patients confirmed taking the OTC painkillers; 22% of these patients took these drugs at least several times a week, and 4% took these drugs daily. For 38% of the study kidney transplant recipients, NSAIDs or analgesics were reported to be the only way to manage their pain. In addition, 30% of study patients were unaware of the risks associated with these drugs, despite the fact that 89% of the study patients consider physicians the best source of information. CONCLUSIONS Our study found that 63% of kidney transplant recipients regularly took OTC painkillers and 30% were unaware of the potential adverse effects. This necessitates continuous, ongoing education of kidney transplant recipients about the risks of OTC NSAIDs or analgesics use.

75 FR 42786 - Accounting Guide for LSC Recipients (2010 Edition)

Science.gov (United States)

2010-07-22

... LEGAL SERVICES CORPORATION Accounting Guide for LSC Recipients (2010 Edition) AGENCY: Legal... Accounting Guide for LSC Recipients to reflect changes that have occurred since the last publication of the Accounting Guide (the ``Guide'') in 1997. Notice was published in the Federal Register on February 2, 2010...

Farmers' Market Utilization among Supplemental Nutrition Assistance Program Recipients in New Orleans, Louisiana: Preliminary Findings.

Science.gov (United States)

Nuss, Henry; Skizim, Meg; Afaneh, Hasheemah; Miele, Lucio; Sothern, Melinda

2017-01-01

Farmers' markets are increasingly being promoted as a means to provide fresh produce to poor and underserved communities. However, farmers' market (FM) use remains low among low-income patrons. The purpose of our study was to examine FM awareness and use, grocery shopping behaviors, and internet use among Supplemental Nutrition Assistance Program (SNAP) recipients. A descriptive analysis of preliminary data was performed to evaluate quantitative baseline data among SNAP recipients between June and August 2016 in New Orleans, Louisiana (N=51). Data were collected via a 42-item online survey that included demographics, internet use, FM awareness and use, health information seeking behaviors and fruit and vegetable purchasing behaviors. Less than half of the survey respondents (n=24) had ever been to a FM. Local grocery stores and Wal-Mart were most used for purchasing fruits and vegetables (88% and 84%, respectively). The most common sources of healthy eating information were Women, Infants and Children (WIC) and the internet, frequently accessed via smartphones. More than 80% of participants were not aware that local FMs accepted electronic benefit transfer payments as a form of payment. These results support the incorporation of promotional methodology that combines internet-based mobile technology and existing services (eg, WIC) as a viable strategy to improve farmers' market use among low-income populations. As most participants were not aware that participating FMs accept electronic benefit transfer payments, this fact should be emphasized in promotional material.

New-Onset Diabetes Mellitus in Liver Transplant Recipients With Hepatitis C: Analysis of the National Database.

Science.gov (United States)

Li, Z; Sun, F; Hu, Z; Xiang, J; Zhou, J; Yan, S; Wu, J; Zhou, L; Zheng, S

2016-01-01

New-onset diabetes mellitus (NODM) after liver transplantation (LT) occurs with increased frequency in recipients with hepatitis C virus (HCV). We compared the incidence and risk factors for NODM in HCV vs non-HCV recipients. Among 24,956 liver recipients, 18,741 without pretransplantation diabetes were identified. NODM-free survival was analyzed using Kaplan-Meier and log-rank tests, and risk factors for NODM were examined using multivariate Cox regression analysis. The overall incidence of NODM was 13.0% at 1 year after LT. At 1, 2, 3, and 5 years after LT, incidence of NODM in HCV recipients was 14.4%, 4.3%, 3.1%, and 3.5%, respectively, compared with 11.9%, 3.5%, 3.2%, and 6.4%, respectively, in non-HCV recipients. HCV recipients had a higher risk of NODM than non-HCV recipients (hazard ratio 1.17 [1.09-1.27], P diabetes mellitus. Risk factors in non-HCV recipients were male recipient, BMI, and recipients with nonalcoholic steatohepatitis diagnosis. HCV recipients have a higher incidence and more risk factors for NODM than non-HCV recipients. Early identification of modifiable risk factors will assist clinical interventions to prevent NODM complications after LT. Copyright © 2016 Elsevier Inc. All rights reserved.

How efficient are municipalities in activating cash-help recipients in Denmark

DEFF Research Database (Denmark)

Weatherall, James; Beltov, Tor

Previous studies do not analyse activation starts as the parameter of interest in evaluating labour market programs. In this paper we evaluate municipality ability to activate cash-help recipients, which helps recipients gain the necessary skills vital to future regular employment in Denmark...... policy (ALMP) practices and organisation can only determine activation participation to a certain extent because unemployed cash-help recipient ability affects participation in activation. Municipalities can improve activation efficiency levels in the future by emulating the efficient municipalities...

Parvovirus-B19-associated complications in renal transplant recipients.

Science.gov (United States)

Waldman, Meryl; Kopp, Jeffrey B

2007-10-01

Parvovirus B19 is a common human pathogen, causing erythema infectiosum in children, hydrops fetalis in pregnant women, and transient aplastic crisis in patients with chronic hemolytic anemia. Immunosuppressed patients can fail to mount an effective immune response to B19, resulting in prolonged or persistent viremia. Renal transplant recipients can develop symptomatic B19 infections as a result of primary infection acquired via the usual respiratory route or via the transplanted organ, or because of reactivation of latent or persistent viral infection. The most common manifestations of B19 infection in immunosuppressed patients are pure red cell aplasia and other cytopenias. Thus, this diagnosis should be considered in transplant recipients with unexplained anemia and reticulocytopenia or pancytopenia. Collapsing glomerulopathy and thrombotic microangiopathy have been reported in association with B19 infection in renal transplant recipients, but a causal relationship has not been definitively established. Prompt diagnosis of B19 infection in the renal transplant recipient requires a high index of suspicion and careful selection of diagnostic tests, which include serologies and polymerase chain reaction. Most patients benefit from intravenous immunoglobulin therapy and/or alteration or reduction of immunosuppressive therapy. Conservative therapy might be sufficient in some cases.

Clinical Outcomes and Quality of Life in Recipients of Livers Donated after Cardiac Death

Directory of Open Access Journals (Sweden)

Neehar D. Parikh

2015-01-01

Full Text Available Donation after cardiac death (DCD has expanded in the last decade in the US; however, DCD liver utilization has flattened in recent years due to poor outcomes. We examined clinical and quality of life (QOL outcomes of DCD recipients by conducting a retrospective and cross-sectional review of patients from 2003 to 2010. We compared clinical outcomes of DCD recipients (n=60 to those of donation after brain death (DBD liver recipients (n=669 during the same time period. DCD recipients had significantly lower rates of 5-year graft survival (P<0.001 and a trend toward lower rates of 5-year patient survival (P=0.064 when compared to the DBD cohort. In order to examine QOL outcomes in our cohorts, we administered the Short Form Liver Disease Quality of Life questionnaire to 30 DCD and 60 DBD recipients. The DCD recipients reported lower generic and liver-specific QOL. We further stratified the DCD cohort by the presence of ischemic cholangiopathy (IC. Patients with IC reported lower QOL when compared to DBD recipients and those DCD recipients without IC (P<0.05. While the results are consistent with clinical experience, this is the first report of QOL in DCD recipients using standardized measures. These data can be used to guide future comparative effectiveness studies.

Haptoglobin 2-2 Genotype, Patient, and Graft Survival in Renal Transplant Recipients

DEFF Research Database (Denmark)

Dupont, Laust; Eide, Ivar Anders; Hartmann, Anders

2017-01-01

Background: Cardiovascular disease is the leading cause of death in renal transplant recipients. An association between haptoglobin genotype 2-2 and cardiovascular disease has been found in patients with diabetes mellitus and liver transplant recipients. To date, the role of haptoglobin genotype...... after renal transplantation has not been studied. Methods: In this single-center retrospective cohort study of 1975 adult Norwegian transplant recipients, who underwent transplantation between 1999 and 2011, we estimated the risk of all-cause and cardiovascular mortality and overall and death...... transplant recipients, we could not demonstrate any association between haptoglobin 2-2 genotype and patient or graft survival after renal transplantation....

Fungal abdominal wall abscess in a renal transplant recipient

International Nuclear Information System (INIS)

Sanavi, R. Suzan; Gashti, Hossein Nejad; Afshar, R.

2006-01-01

The incidence of fungal infection is significantly higher in patients with end-stage renal disease and renal transplant recipients than in normal individuals. Candida Albicans is an uncommon cause of abdominal wall abscess. We describe a 37 year-old renal transplant recipient with such an infection. He presented with a typical clinical manifestations and an insidious course, but was successfully treated with antifungal therapy. (author)

Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

Science.gov (United States)

Linke, Bernd M.; Gerber, Thomas; Hatscher, Ansgar; Salvatori, Ilaria; Aranguren, Iñigo; Arribas, Maribel

2018-01-01

Based on 22MnB5 hot stamping steel, three model alloys containing 0.5, 0.8, and 1.5 wt pct Si were produced, heat treated by quenching and partitioning (Q&P), and characterized. Aided by DICTRA calculations, the thermal Q&P cycles were designed to fit into industrial hot stamping by keeping partitioning times ≤ 30 seconds. As expected, Si increased the amount of retained austenite (RA) stabilized after final cooling. However, for the intermediate Si alloy the heat treatment exerted a particularly pronounced influence with an RA content three times as high for the one-step process compared to the two-step process. It appeared that 0.8 wt pct Si sufficed to suppress direct cementite formation from within martensite laths but did not sufficiently stabilize carbon-soaked RA at higher temperatures. Tensile and bending tests showed strongly diverging effects of austenite on ductility. Total elongation improved consistently with increasing RA content independently from its carbon content. In contrast, the bending angle was not impacted by high-carbon RA but deteriorated almost linearly with the amount of low-carbon RA.

Clinical effects of blood donor characteristics in transfusion recipients: protocol of a framework to study the blood donor-recipient continuum.

Science.gov (United States)

Chassé, Michaël; McIntyre, Lauralyn; Tinmouth, Alan; Acker, Jason; English, Shane W; Knoll, Greg; Forster, Alan; Shehata, Nadine; Wilson, Kumanan; van Walraven, Carl; Ducharme, Robin; Fergusson, Dean A

2015-01-19

When used appropriately, transfusion of red blood cells (RBCs) is a necessary life-saving therapy. However, RBC transfusions have been associated with negative outcomes such as infection and organ damage. Seeking explanations for the beneficial and deleterious effects of RBC transfusions is necessary to ensure the safe and optimal use of this precious resource. This study will create a framework to analyse the influence of blood donor characteristics on recipient outcomes. We will conduct a multisite, longitudinal cohort study using blood donor data routinely collected by Canadian Blood Services, and recipient data from health administrative databases. Our project will include a thorough validation of primary data, the linkage of various databases into one large longitudinal database, an in-depth epidemiological analysis and a careful interpretation and dissemination of the results to assist the decision-making process of clinicians, researchers and policymakers in transfusion medicine. Our primary donor characteristic will be age of blood donors and our secondary donor characteristics will be donor-recipient blood group compatibility and blood donor sex. Our primary recipient outcome will be a statistically appropriate survival analysis post-RBC transfusion up to a maximum of 8 years. Our secondary recipient outcomes will include 1-year, 2-year and 5-year mortality; hospital and intensive care unit length of stay; rehospitalisation; new cancer and cancer recurrence rate; infection rate; new occurrence of myocardial infarctions and need for haemodialysis. Our results will help determine whether we need to tailor transfusion based on donor characteristics, and perhaps this will improve patient outcome. Our results will be customised to target the different stakeholders involved with blood transfusions and will include presentations, peer-reviewed publications and the use of the dissemination network of blood supply organisations. We obtained approval from the

Caregiver Confidence: Does It Predict Changes in Disability among Elderly Home Care Recipients?

Science.gov (United States)

Li, Lydia W.; McLaughlin, Sara J.

2012-01-01

Purpose of the study: The primary aim of this investigation was to determine whether caregiver confidence in their care recipients' functional capabilities predicts changes in the performance of activities of daily living (ADL) among elderly home care recipients. A secondary aim was to explore how caregiver confidence and care recipient functional…

An observational study of health literacy and medication adherence in adult kidney transplant recipients

OpenAIRE

Demian, Maryam N.; Shapiro, R. Jean; Thornton, Wendy Loken

2016-01-01

Background There is a high prevalence of non-adherence to immunosuppressants in kidney transplant recipients. Although limited health literacy is common in kidney recipients and is linked to adverse outcomes in other medical populations, its effect on medication adherence in kidney transplant recipients remains poorly understood. The objective was to investigate the effect of lower health literacy on immunosuppressant adherence. Methods Kidney recipients who were at least 6 months post-transp...

40 CFR 7.85 - Recipients.

Science.gov (United States)

2010-07-01

...; (2) Racial/ethnic, national origin, sex and handicap data, or EPA Form 4700-4 information submitted... normal business hours to its books, records, accounts and other sources of information, including its... Recipients. (a) * * * (2) Racial/ethnic, national origin, age, sex and handicap data, or EPA Form 4700-4...

Too little, too late: comparison of nutritional status and quality of life of nutrition care and support recipient and non-recipients among HIV-positive adults in KwaZulu-Natal, South Africa.

Science.gov (United States)

Oketch, Jecinter Akinyi; Paterson, Marie; Maunder, Eleni Winfred; Rollins, Nigel Campbell

2011-03-01

Compare the nutritional vulnerability, risk of malnutrition, nutritional status and quality of life (QoL) between recipients and non-recipients of nutrition care and support (NCS) of HIV-positive adults. In 2009, a household-based cross-sectional study of HIV-positive adults, NCS recipients (n=97) and non-NCS recipients (n=203) from KwaZulu-Natal was conducted. Nutritional vulnerability (socio-economic status; food security; self-reported health status; nutritional knowledge and attitude), risk of malnutrition (nutrition assessment screening tool), anthropometry (body mass index; mid-upper arm circumference; waist-to-hip ratio) and QoL (general health; self-care; physical functioning) were compared between the two groups. Although the result suggests a modest impairment of QoL, NCS recipients were twice as likely to have severe impairment of general health; self-care functioning and QoL. Overweight and obesity were common despite indications of high prevalence of food insecurity, possible-risk of malnutrition and diets predominantly of cereals. NCS recipients were more frequently taking anti-retroviral drugs, receiving social grants, reporting good eating plans and owning kitchen gardens. Non-NCS recipients had been generally sick, reported fatigue, nausea, appetite loss and diarrhoea. NCS recipients were twice as likely to experience oral thrush. Contextual factors such as low dietary diversity and household food insecurity that exacerbates nutritional vulnerability and malnutrition should be considered when providing NCS to fully achieve nutritional recovery and QoL of HIV-positive adults. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Rabbit antithymocyte globulin is more beneficial in standard kidney than in extended donor recipients.

Science.gov (United States)

Hardinger, Karen L; Brennan, Daniel C; Schnitzler, Mark A

2009-05-15

In a randomized, international study comparing rabbit antithymocyte globulin (TMG) and basiliximab (BAS) induction in renal transplant recipients at risk for delayed graft function or acute rejection (n=278), TMG was associated with less acute rejection at 1 year. This study analyzed outcomes stratified by standard criteria donor (SCD), extended criteria donor (ECD), and hypertensive donor. Data-capture limitations necessitated defining ECD as donor age more than 60 years or 50 to 60 years with hypertension and renal insufficiency. Seventy-five recipients received ECD-kidneys (28.4% TMG vs. 25.6% BAS, P=NS) and 203 recipients received SCD-kidneys (72.6% TMG vs. 74.4% BAS, P=NS). Recipients of an ECD or hypertensive donor-kidney had similar outcomes between treatment groups. Recipients of an SCD-kidney treated with TMG had less rejection (odds ratio [OR] 0.48). Recipients of a normotensive donor-kidney treated with TMG had less rejection (OR 0.56). Recipients of a normotensive, SCD-kidney treated with TMG had less rejection (OR 0.47) and death (OR 0.17) than their counterparts treated with BAS. Contrary to its perceived niche in recipients of ECD-kidneys, TMG was most beneficial in patients who received a normotensive, deceased SCD kidney.

Associations of recipient illness history with hypertension and diabetes after living kidney donation.

Science.gov (United States)

Lentine, Krista L; Schnitzler, Mark A; Xiao, Huiling; Davis, Connie L; Axelrod, David; Abbott, Kevin C; Salvalaggio, Paolo R; Burroughs, Thomas E; Saab, Georges; Brennan, Daniel C

2011-06-15

Little is known about associations of family health history with outcomes after kidney donation. Using a database wherein Organ Procurement and Transplantation Network identifiers for 4650 living kidney donors in 1987 to 2007 were linked to administrative data of a US private health insurer (2000-2007 claims), we examined associations of recipient illness history as a measure of family history with postdonation diagnoses and drug-treatment for hypertension and diabetes. Cox regression with left and right censoring was applied to estimate associations (adjusted hazards ratios, aHR) of recipient illness history with postnephrectomy donor diagnoses, stratified by donor-recipient relationship. Recipient end-stage renal disease from hypertension, as compared with other recipient end-stage renal disease causes, was associated with modest, significant increases in the age- and gender-adjusted relative risks of hypertension diagnosis (aHR, 1.37%; 95% confidence interval [CI], 1.08-1.74) after donor nephrectomy among related donors. After adjustment for age, gender, and race, recipient type 2 diabetes compared with non-diabetic recipient status was associated with twice the relative risk of postdonation diabetes (aHR, 2.14; 95% CI, 1.28-3.55; P=0.003) among related donors. These patterns were significant among white but not among non-white related donors. Recipient type 1 diabetes was associated with postdonation diabetes only in black related donors (aHR, 3.22; 95% CI, 1.04-9.98; P=0.04). Recipient illness did not correlate significantly with outcomes in unrelated donors. These data support a need for further study of family health history as a potential sociodemographic correlate of donor outcomes, including examination of potential mediating factors and variation in risk discrimination among donors of different racial groups.

Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization

Directory of Open Access Journals (Sweden)

He Bin

2016-01-01

Full Text Available In order to optimize the layout of the conformal cooling channels in hot stamping tools, a response surface methodology and multi-objective optimization technique are proposed. By means of an Optimal Latin Hypercube experimental design method, a design matrix with 17 factors and 50 levels is generated. Three kinds of design variables, the radius Rad of the cooling channel, the distance H from the channel center to tool work surface and the ratio rat of each channel center, are optimized to determine the layout of cooling channels. The average temperature and temperature deviation of work surface are used to evaluate the cooling performance of hot stamping tools. On the basis of the experimental design results, quadratic response surface models are established to describe the relationship between the design variables and the evaluation objectives. The error analysis is performed to ensure the accuracy of response surface models. Then the layout of the conformal cooling channels is optimized in accordance with a multi-objective optimization method to find the Pareto optimal frontier which consists of some optimal combinations of design variables that can lead to an acceptable cooling performance.

Springback Prediction, Compensation and Correlation for Automotive Stamping

International Nuclear Information System (INIS)

Xu Siguang; Zhao Kunmin; Lanker, Terry; Zhang, Jimmy; Wang, C.T.

2005-01-01

To reduce weight and increase fuel efficiency and safety, more and more automotive sheet stamping parts are being made of aluminum and high strength steels. Forming of such materials encounters not just reduced formability but also dimensional quality problems. Springback prediction accuracy and compensation effectiveness have been the major challenge to die development, construction and tryout. In this paper, the factors that affect the accuracy of springback prediction are discussed, which includes the effect of material models, the selection of element size, and the contact algorithms. Springback predictions of several automotive aluminum and high strength panels are compared with measurement data. The examples show that the prediction correlates with measurement data in both springback trend and magnitude. The effect of springback on final product can be reduced or eliminated through process control and die face compensation. The process control method involves finding the root causes of springback and eliminating them through process modification. The geometrical compensation of die surface is a direct way to eliminate the springback effect. The global scaling compensation method is normally limited to parts with relatively small springback. For large springback and twisting, a new approach is discussed, which takes into account of the effect of deformation and springback history. The compensation is achieved iteratively by solving a system of non-linear equations. Production dies were cut to the compensated surface, which shows that the die compensation is an efficient way to reduce springback-induced geometry deviation

Enhancing patient engagement and blood pressure management for renal transplant recipients via home electronic monitoring and web-enabled collaborative care.

Science.gov (United States)

Aberger, Edward W; Migliozzi, Daniel; Follick, Michael J; Malick, Tom; Ahern, David K

2014-09-01

Effective management of hypertension in chronic kidney disease and renal transplantation is a clinical priority and has societal implications in terms of preserving and optimizing the value of scarce organs. However, hypertension is optimally managed in only 37% of people with chronic kidney disease, and poor control can contribute to premature graft loss in renal transplant recipients. This article describes a telehealth system that incorporates home electronic blood pressure (BP) monitoring and uploading to a patient portal coupled with a Web-based dashboard that enables clinical pharmacist collaborative care in a renal transplant clinic. The telehealth system was developed and implemented as a quality improvement initiative in a renal transplant clinic in a large, 700-bed, urban hospital with the aim of improving BP in posttransplant patients. A convenience sample of 66 posttransplant patients was recruited by the clinical pharmacist from consecutive referrals to the Transplant Clinic. Preliminary results show statistically significant reductions in average systolic and diastolic BP of 6.0 mm Hg and 3.0 mm Hg, respectively, at 30 days after enrollment. Two case reports describe the instrumental role of home BP monitoring in the context of medication therapy management. Optimizing BP control for both pre- and post-renal transplant patients is likely to benefit society in terms of preserving scarce resources and reducing healthcare costs due to premature graft failure. Connected health systems hold great promise for supporting team-based care and improved health outcomes.

Considerations for Residency Programs Regarding Accepting Undocumented Students Who Are DACA Recipients.

Science.gov (United States)

Nakae, Sunny; Rojas Marquez, Denisse; Di Bartolo, Isha Marina; Rodriguez, Raquel

2017-11-01

The Deferred Action for Childhood Arrivals (DACA) initiative provides for the temporary deferral of enforcement of immigration laws for certain undocumented individuals brought to the United States before age 16. More than 50 medical schools now consider applicants who are DACA recipients, and medical school graduates with DACA are eligible to continue their training in graduate medical education. In this article, the authors summarize current policy and provide data on DACA recipients in medical school. They then review the implications for considering DACA recipients in graduate medical education, including employment guidelines, employer responsibilities, training at Veterans Affairs facilities, research funding, and professional licensure. They conclude by discussing the future of the DACA program and best practices for supporting students who are DACA recipients.First, there are no employment restrictions for DACA recipients with valid work authorization documents as long as their employers use Form I-9 Employment Eligibility Verification. Second, unlike H-1B or J-1 visa holders, DACA recipients do not generate additional immigration-related costs for their residency programs. Next, provisions in the Civil Rights Act prohibit employers from discriminating against applicants based on national origin or, in some cases, citizenship status. Furthermore, trainees with DACA are eligible to rotate through Veterans Affairs facilities. Finally, some states, like California and New York, have adopted policies and regulations allowing trainees with DACA who meet all professional requirements to receive a medical license. Given this state of affairs, DACA recipients should have equal standing to their peers when being evaluated for residency positions.

The Impact of Cardiovascular Risk Factors on Graft Outcome Disparities in African American Kidney Transplant Recipients

Science.gov (United States)

Taber, David J; Hunt, Kelly J; Fominaya, Cory E; Payne, Elizabeth H; Gebregziabher, Mulugeta; Srinivas, Titte R; Baliga, Prabhakar K; Egede, Leonard E

2016-01-01

Although outcome inequalities for non-Hispanic Black (NHB) kidney transplant recipients are well documented, there is paucity in data assessing the impact of cardiovascular disease (CVD) risk factors on this disparity in kidney transplantation. This was a longitudinal study of a national cohort of veteran kidney recipients transplanted between Jan 2001 and Dec 2007. Data included baseline characteristics acquired through the USRDS linked to detailed clinical follow up information acquired through the VA electronic health records. Analyses were conducted using sequential multivariable modeling (Cox regression), incorporating blocks of variables into iterative nested models; 3,139 patients were included (2,095 NHW [66.7%] and 1,044 NHBs [33.3%]). NHBs had a higher prevalence of hypertension (100% vs. 99%, ptransplant diabetes (59% vs. 53%, pAdherence to medications used to manage CVD risk was significantly lower in NHBs. In the fully adjusted models, the independent risk of graft loss in NHBs was substantially reduced (unadjusted HR 2.00 vs. adjusted HR 1.49). CVD risk factors and control reduced the influence of NHB race by 9–18%. Similar trends were noted for mortality and estimates were robust across in sensitivity analyses. These results demonstrate that NHB kidney transplant recipients have significantly higher rates of CVD risk factors and reduced CVD risk control. These issues are likely partly related to medication non-adherence and meaningfully contribute to racial disparities for graft outcomes. PMID:27402921

32 CFR 32.41 - Recipient responsibilities.

Science.gov (United States)

2010-07-01

... Federal, State or local authority as may have proper jurisdiction. ..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 32.41... contractual responsibilities arising under its contract(s). The recipient is the responsible authority...

Verification of human actions in SBO sequences with LOCA stamps in Westinghouse PWRs

International Nuclear Information System (INIS)

Queral, C.; Mena Rosell, L.; Jimenez Varas, G.

2013-01-01

The Fukushima accident has shown the need for tools and methodologies able to analyze human activities and / or capabilities of portable systems that has given the Spanish plants as a result of the stress tests . In this work we have applied the methodology of integrated safety analysis developed by the CSN , to SBO sequences with LOCA stamp. The aim is to show a methodology for testing the performances of the Emergency Operating Procedures and Guides Severe Accident Management. The simulations were performed with the tool SCAIS coupled to MAAP . The results show that there are human activities that may be beneficial in certain sequences but harmful in others. This type of problem is already known and referred to in the GGAS . However, FSR shows a practical way to check human actions cannot be obtained with other methods.

Deficiency in early development of the thymus-dependent cells in irradiation chimeras attributable to recipient's environment

International Nuclear Information System (INIS)

Iwabuchi, C.; Iwabuchi, K.; Kobayashi, S.; Ogasawara, K.; Negishi, I.; Wang, B.Y.; Wambua, P.P.; Arase, H.; Fukushi, N.; Itoh, Y.

1991-01-01

Bone marrow chimeras were prepared using reciprocal combinations of AKR and C3H mice. When C3H mice were recipients, the number of thymocytes recoverable from such chimeras (C3H recipient chimeras) was small as compared with that from chimeras for which AKR mice were used as recipients (AKR recipient chimeras) regardless of donor strain. The thymocytes from C3H recipient chimeras showed a profound deficiency in generating proliferative responses to stimulation by anti-CD3 mAb (2C11) or anti-TCR (alpha, beta) mAb (H57-597), even though the expression of CD3 and TCR molecules fell within the same range as that in AKR recipient chimeras. Furthermore, after stimulation with immobilized 2C11, the proportion of IL-2R+ cells in the thymocytes from C3H recipient chimeras was much less than that in AKR recipient chimeras. However, no significant difference in proliferative responses to 2C11 plus PMA, in influx of Ca2+ after stimulation with 2C11 or IL-2 production in response to 2C11 plus PMA or PMA plus A23187 was demonstrated between C3H and AKR recipient chimeras. These findings suggest that the thymocytes from C3H recipient chimeras have a deficiency in the signal transduction system as compared with chimeras for which AKR mice are the recipients. The thymic stromal component involved in this difference in the C3H recipient chimeras is discussed

Caregiver Burden, Care Recipient Depressive Symptomology, and Social Exchange: Does Race Matter?

Science.gov (United States)

Ejem, Deborah; Bauldry, Shawn; Bakitas, Marie; Drentea, Patricia

2018-04-01

Informal caregivers play a vital role in supporting seriously ill patients. However, informal caregiving is burdensome and can lead to negative health outcomes for the caregiver and the care recipient. The study's aim was to evaluate relationships among caregiver burden, care recipient depressive symptomology, and race. Guided by the social exchange perspective, we examined cross-sectional dyadic data from the National Long-Term Care Survey (N = 1279). Using ordinal logistic regression, we found that higher caregiver-reported objective burden was associated with higher care recipient depressive symptoms ( P exchange of the social good "helpful company" with a caregiver. These findings illustrate the importance of supporting reciprocal exchange as a promising component of maintaining balanced caregiver-care recipient relationships among black older adults and their informal caregivers.

Hospital-onset Clostridium difficile infection among solid organ transplant recipients.

Science.gov (United States)

Donnelly, J P; Wang, H E; Locke, J E; Mannon, R B; Safford, M M; Baddley, J W

2015-11-01

Clostridium difficile infection (CDI) is a considerable health issue in the United States and represents the most common healthcare-associated infection. Solid organ transplant recipients are at increased risk of CDI, which can affect both graft and patient survival. However, little is known about the impact of CDI on health services utilization posttransplantation. We examined hospital-onset CDI from 2012 to 2014 among transplant recipients in the University HealthSystem Consortium, which includes academic medical center-affiliated hospitals in the United States. Infection was five times more common among transplant recipients than among general medicine inpatients (209 vs 40 per 10 000 discharges), and factors associated with CDI among transplant recipients included transplant type, risk of mortality, comorbidities, and inpatient complications. Institutional risk-standardized CDI varied more than 3-fold across high-volume hospitals (infection ratio 0.54-1.82, median 1.04, interquartile range 0.78-1.28). CDI was associated with increased 30-day readmission, transplant organ complications, cytomegalovirus infection, inpatient costs, and lengths of stay. Total observed inpatient days and direct costs for those with CDI were substantially higher than risk-standardized expected values (40 094 vs 22 843 days, costs $198 728 368 vs $154 020 528). Further efforts to detect, prevent, and manage CDI among solid organ transplant recipients are warranted. © Copyright 2015 The American Society of Transplantation and the American Society of Transplant Surgeons.

Laparoscopic cholecystectomy in a cardiac transplant recipient.

Science.gov (United States)

Pandya, Seema R; Paranjape, Saloni

2014-04-01

An increasing number of cardiac transplants are being carried out around the world. With increasing longevity, these patients present a unique challenge to non-transplant anesthesiologists for a variety of transplant related or incidental surgeries. The general considerations related to a cardiac transplant recipient are the physiological and pharmacological problems of allograft denervation, the side-effects of immunosuppression, the risk of infection and the potential for rejection. A thorough understanding of the physiology of a denervated heart, need for direct vasoactive agents and post-transplant morbidities is essential in anesthetic management of such a patient. Here, we describe a case of a heart transplant recipient who presented for a cholecystectomy at our center.

Augmentation of transfer of experimental autoimmune thyroiditis (EAT) in mice by irradiation of recipients

International Nuclear Information System (INIS)

Williams, W.V.; Kyriakos, M.; Sharp, G.C.; Braley-Mullen, H.

1987-01-01

Experimental autoimmune thyroiditis (EAT) can be adoptively transferred to normal syngeneic recipients using spleen cells from susceptible strains of mice primed in vivo with mouse thyroglobulin (MTg) and lipopolysaccharide (LPS) following in vitro activation of spleen cells by culture with MTg. Irradiation of recipient animals markedly augments the severity of thyroiditis induced in this system. Irradiation of recipients does not alter the time course of the development of thyroiditis, nor does it alter the requirement for both in vivo priming and in vitro activation of spleen cells for the development of EAT. Spleen cells from EAT-resistant strains of mice (e.g., Balb/c) do not induce EAT in irradiated recipients. Irradiated recipients develop significant levels of anti-MTg antibodies while unirradiated recipients have little detectable antibody response. The augmenting effect of irradiation can be substantially reversed by transferring naive spleen cells to recipients prior to the transfer of MTg/LPS-primed in vitro-activated spleen cells. In addition athymic CBA/Tufts nude mice develop more severe EAT than CBA/Tufts nude/+ littermates following transfer of activated CBA/J spleen cells. These data suggest that natural suppressor cells may regulate the development of EAT at the effector cell level

Stability and Longevity in the Publication Careers of U.S. Doctorate Recipients.

Directory of Open Access Journals (Sweden)

Cathelijn J F Waaijer

Full Text Available Since the 1950s, the number of doctorate recipients has risen dramatically in the United States. In this paper, we investigate whether the longevity of doctorate recipients' publication careers has changed. This is achieved by matching 1951-2010 doctorate recipients with rare names in astrophysics, chemistry, economics, genetics and psychology in the dissertation database ProQuest to their publications in the publication database Web of Science. Our study shows that pre-PhD publication careers have changed: the median year of first publication has shifted from after the PhD to several years before PhD in most of the studied fields. In contrast, post-PhD publication career spans have not changed much in most fields. The share of doctorate recipients who have published for more than twenty years has remained stable over time; the shares of doctorate recipients publishing for shorter periods also remained almost unchanged. Thus, though there have been changes in pre-PhD publication careers, post-PhD career spans remained quite stable.

Successful pregnancy following single blastocyst transfer in a renal transplant recipient.

Science.gov (United States)

Muthuvel, V Arun; Ravindran, Manipriya; Chander, Aravind; Veluswamy, Chandralekha

2016-01-01

Numerous spontaneous pregnancies have been reported in renal transplant recipients; however, only a few pregnancies after the use of assisted reproductive techniques. The authors report a case of renal transplant recipient with secondary infertility who delivered a healthy baby without any complications. The report highlights the importance of minimal stimulation protocol during ovarian stimulation, single embryo transfer, and the need for multispecialty care for these patients. To the best of the authors' knowledge, the present report is the first such case from India and also the second in the world to report a blastocyst transfer among renal transplant recipients.

Progressive multifocal leukoencephalopathy in transplant recipients

NARCIS (Netherlands)

Mateen, Farrah J.; Muralidharan, RajaNandini; Carone, Marco; van de Beek, Diederik; Harrison, Daniel M.; Aksamit, Allen J.; Gould, Mary S.; Clifford, David B.; Nath, Avindra

2011-01-01

Transplant recipients are at risk of developing progressive multifocal leukoencephalopathy (PML), a rare demyelinating disorder caused by oligodendrocyte destruction by JC virus. Reports of PML following transplantation were found using PubMed Entrez (1958-July 2010). A multicenter, retrospective

Kaposi's sarcoma in organ transplant recipients. The Collaborative Transplantation Research Group of Ile de France.

Science.gov (United States)

Farge, D

1993-01-01

Kaposi's Sarcoma (KS) is a tumour of multicentric origin with increased frequency after organ transplantation. To date, only North American data from the Cincinnati Transplant Tumor Registry have given some information about this disease in organ transplant recipients, but its true prevalence still has to be determined. In order to analyze Kaposi's sarcoma after kidney, liver and heart transplantation, we performed a retrospective study using the oldest registry of organ transplant recipients in Europe. Among all 7923 organ transplant recipients recorded in the Groupe Collaboratif de Recherche en Transplantation de l'Ile de France (GCIF) registry from 1968 to 1990, we analyzed the prevalence and the clinical characteristics of Kaposi's sarcoma in 6229 kidney, 727 liver and 967 heart transplant recipients. In the subgroup of kidney transplant recipients, we assessed the role of cyclosporine on disease evolution. Overall prevalence of Kaposi's sarcoma after organ transplantation was 0.52%, but it was significantly higher among liver (1.24%) than among kidney (0.45%) and heart (0.41%) transplant recipients. Chronic hepatitis B surface antigen carriers were more frequent in liver than in kidney transplant recipients who developed Kaposi's sarcoma (66% vs 21%, p < 0.03). Following kidney transplantation, Kaposi's sarcoma was more severe in patients receiving cyclosporine (n = 16) when compared with those under conventional immunosuppression (n = 12). True prevalence of Kaposi's sarcoma among European transplant recipients is high (0.52%) and appeared significantly higher in liver compared with other organ transplant recipients. Cyclosporine seems to increase severity of the disease among kidney transplant recipient.

Perspectives of Older Kidney Transplant Recipients on Kidney Transplantation.

Science.gov (United States)

Pinter, Jule; Hanson, Camilla S; Chapman, Jeremy R; Wong, Germaine; Craig, Jonathan C; Schell, Jane O; Tong, Allison

2017-03-07

Older kidney transplant recipients are susceptible to cognitive impairment, frailty, comorbidities, immunosuppression-related complications, and chronic graft failure, however, there has been limited focus on their concerns and expectations related to transplantation. This study aims to describe the perspectives of older kidney transplant recipients about their experience of kidney transplantation, self-management, and treatment goals to inform strategies and interventions that address their specific needs. Face-to-face semistructured interviews were conducted with 30 kidney transplant recipients aged 65-80 years from five renal units in Australia. Transcripts were analyzed thematically. Six themes were identified: restoring vitality of youth (with subthemes of revived mindset for resilience, embracing enjoyment in life, drive for self-actualization); persisting through prolonged recovery (yielding to aging, accepting functional limitations, pushing the limit, enduring treatment responsibilities); imposing sicknesses (combatting devastating comorbidities, painful restrictions, emerging disillusionment, anxieties about accumulating side effects, consuming treatment burden); prioritizing graft survival (privileged with a miracle, negotiating risks for longevity, enacting a moral duty, preserving the last opportunity); confronting health deterioration (vulnerability and helplessness, narrowing focus to immediate concerns, uncertainty of survival); and value of existence (purpose through autonomy, refusing the burden of futile treatment, staying alive by all means). Older kidney transplant recipients felt able to enjoy life and strived to live at their newly re-established potential and capability, which motivated them to protect their graft. However, some felt constrained by slow recuperation and overwhelmed by unexpected comorbidities, medication-related side effects, and health decline. Our findings suggest the need to prepare and support older recipients for self

Direct visualization of Agrobacterium-delivered VirE2 in recipient cells

Science.gov (United States)

Li, Xiaoyang; Yang, Qinghua; Tu, Haitao; Lim, Zijie; Pan, Shen Q

2014-01-01

Agrobacterium tumefaciens is a natural genetic engineer widely used to deliver DNA into various recipients, including plant, yeast and fungal cells. The bacterium can transfer single-stranded DNA molecules (T–DNAs) and bacterial virulence proteins, including VirE2. However, neither the DNA nor the protein molecules have ever been directly visualized after the delivery. In this report, we adopted a split-GFP approach: the small GFP fragment (GFP11) was inserted into VirE2 at a permissive site to create the VirE2-GFP11 fusion, which was expressed in A. tumefaciens; and the large fragment (GFP1–10) was expressed in recipient cells. Upon delivery of VirE2-GFP11 into the recipient cells, GFP fluorescence signals were visualized. VirE2-GFP11 was functional like VirE2; the GFP fusion movement could indicate the trafficking of Agrobacterium-delivered VirE2. As the natural host, all plant cells seen under a microscope received the VirE2 protein in a leaf-infiltration assay; most of VirE2 moved at a speed of 1.3–3.1 μm sec−1 in a nearly linear direction, suggesting an active trafficking process. Inside plant cells, VirE2-GFP formed filamentous structures of different lengths, even in the absence of T-DNA. As a non-natural host recipient, 51% of yeast cells received VirE2, which did not move inside yeast. All plant cells seen under a microscope transiently expressed the Agrobacterium-delivered transgene, but only 0.2% yeast cells expressed the transgene. This indicates that Agrobacterium is a more efficient vector for protein delivery than T-DNA transformation for a non-natural host recipient: VirE2 trafficking is a limiting factor for the genetic transformation of a non-natural host recipient. The split-GFP approach could enable the real-time visualization of VirE2 trafficking inside recipient cells. PMID:24299048

Inter- and Intrapersonal Barriers to Living Donor Kidney Transplant among Black Recipients and Donors.

Science.gov (United States)

Davis, LaShara A; Grogan, Tracy M; Cox, Joy; Weng, Francis L

2017-08-01

End-stage renal disease (ESRD) is more common among Blacks, but Blacks are less likely to receive a live donor kidney transplant (LDKT). The objective of this study is to identify barriers and coping mechanisms that Black LDKT recipients and donors experienced while receiving or donating a kidney. A qualitative study was conducted using structured interviews. Thematic analysis was used for data interpretation. All 20 participants identified as Black, with two participants identifying themselves as multiracial. The mean age for the 14 recipients was 60, and the average age for the 6 living donors was 47. Themes emerging from the data suggest both recipients and donors faced barriers in the LDKT experience. Recipients faced barriers associated with their denial and avoidance of the severity of their ESRD, their desire to maintain the privacy of their health status, and their refusal to approach potential donors. Donors encountered negative responses from others about the donors' desire to donate and the initial refusal of recipients to accept a LDKT offer. Recipients identified faith as a coping mechanism, while donors identified normalization of donation as their method of coping. Various types of social support helped donors and recipients navigate the transplant process. Black LDKT recipients and donors must overcome barriers prior to receiving or donating a kidney. Most of these barriers arise from communication and interactions with others that are either lacking or undesirable. Future interventions to promote LDKT among Blacks may benefit by specifically targeting these barriers.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

Science.gov (United States)

Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

2010-07-01

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

Energy Technology Data Exchange (ETDEWEB)

Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

2010-07-21

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

International Nuclear Information System (INIS)

Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

2010-01-01

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

10 CFR 600.141 - Recipient responsibilities.

Science.gov (United States)

2010-01-01

... referred to such Federal, State or local authority as may have proper jurisdiction. ... contract(s). The recipient is the responsible authority, without recourse to DOE regarding the settlement and satisfaction of all contractual and administrative issues arising out of procurements entered into...

Immunosuppressive T-cell antibody induction for heart transplant recipients

DEFF Research Database (Denmark)

Penninga, Luit; Møller, Christian H; Gustafsson, Finn

2013-01-01

Heart transplantation has become a valuable and well-accepted treatment option for end-stage heart failure. Rejection of the transplanted heart by the recipient's body is a risk to the success of the procedure, and life-long immunosuppression is necessary to avoid this. Clear evidence is required...... to identify the best, safest and most effective immunosuppressive treatment strategy for heart transplant recipients. To date, there is no consensus on the use of immunosuppressive antibodies against T-cells for induction after heart transplantation....

Symptom Experience Associated With Immunosuppressive Medications in Chinese Kidney Transplant Recipients.

Science.gov (United States)

Teng, Sha; Zhang, Shuping; Zhang, Wenxin; Lin, Xiaohong; Shang, Yabin; Peng, Xiao; Liu, Hongxia

2015-09-01

Kidney transplant recipients require lifelong treatment with immunosuppressive medications to avoid graft rejection and graft loss. Symptoms experienced may influence recipients' perceived quality of life and medication adherence. The purpose of this study was to evaluate the symptom experience associated with immunosuppressive medications in adult kidney transplant recipients and to explore the association between the symptom experience and adherence to immunosuppressive medications. A cross-sectional design was used. The study was conducted in a general hospital in China from October 2013 to September 2014. A total of 231 recipients with a follow-up of at least 1 year after kidney transplantation were included. Symptom experience associated with immunosuppressive medications was measured by the 13-item Symptom Experience of Immunosuppressive-related Side Effects Scale. Self-reported adherence to immunosuppressive medications was assessed using the Adherence with Immunosuppressive Medication Scale. Ridit analysis was used to rank symptom distress items. A proportion of 60.6% of recipients were male; the time after kidney transplantation was arbitrarily divided into a short-term cohort (1-4 years) and a long-term cohort (4-16 years) according to the median duration of follow-up (4 years). High blood pressure, hair loss, and tiredness were the three most distressing symptoms over all items of the whole sample. High blood pressure was the most distressing symptom for the 1- to 4-year cohort and the 4- to 16-year cohort. For men high blood pressure was the most distressing symptom, whereas for women hair loss was the most distressing symptom. Recipients in the 4- to 16-year cohort perceived a higher level of symptom distress compared with those in the 1- to 4-year cohort, especially in excess hair growth and difficulty sleeping. A negative relationship was found between symptom distress and adherence to immunosuppressive medications (r = -.541, p = .000). Recipients

Perceived support from a caregiver's social ties predicts subsequent care-recipient health

Directory of Open Access Journals (Sweden)

Dannielle E. Kelley

2017-12-01

Full Text Available Most social support research has examined support from an individual patient perspective and does not model the broader social context of support felt by caregivers. Understanding how social support networks may complement healthcare services is critical, considering the aging population, as social support networks may be a valuable resource to offset some of the demands placed on the healthcare system. We sought to identify how caregivers' perceived organizational and interpersonal support from their social support network influences care-recipient health.We created a dyadic dataset of care-recipient and caregivers from the first two rounds of the National Health and Aging Trends survey (2011, 2012 and the first round of the associated National Study of Caregivers survey (2011. Using structural equation modeling, we explored how caregivers' perceived social support is associated with caregiver confidence to provide care, and is associated with care-recipient health outcomes at two time points. All data were analyzed in 2016.Social engagement with members from caregivers' social support networks was positively associated with caregiver confidence, and social engagement and confidence were positively associated with care-recipient health at time 1. Social engagement positively predicted patient health at time 2 controlling for time 1. Conversely, use of organizational support negatively predicted care-recipient health at time 2.Care-recipients experience better health outcomes when caregivers are able to be more engaged with members of their social support network. Keywords: Informal caregiving, Social support, Social support network, Patient-caregiver dyads

Perceived support from a caregiver's social ties predicts subsequent care-recipient health.

Science.gov (United States)

Kelley, Dannielle E; Lewis, Megan A; Southwell, Brian G

2017-12-01

Most social support research has examined support from an individual patient perspective and does not model the broader social context of support felt by caregivers. Understanding how social support networks may complement healthcare services is critical, considering the aging population, as social support networks may be a valuable resource to offset some of the demands placed on the healthcare system. We sought to identify how caregivers' perceived organizational and interpersonal support from their social support network influences care-recipient health. We created a dyadic dataset of care-recipient and caregivers from the first two rounds of the National Health and Aging Trends survey (2011, 2012) and the first round of the associated National Study of Caregivers survey (2011). Using structural equation modeling, we explored how caregivers' perceived social support is associated with caregiver confidence to provide care, and is associated with care-recipient health outcomes at two time points. All data were analyzed in 2016. Social engagement with members from caregivers' social support networks was positively associated with caregiver confidence, and social engagement and confidence were positively associated with care-recipient health at time 1. Social engagement positively predicted patient health at time 2 controlling for time 1. Conversely, use of organizational support negatively predicted care-recipient health at time 2. Care-recipients experience better health outcomes when caregivers are able to be more engaged with members of their social support network.

Heart transplant outcomes in recipients of Centers for Disease Control (CDC) high risk donors.

Science.gov (United States)

Tsiouris, Athanasios; Wilson, Lynn; Sekar, Rajesh B; Mangi, Abeel A; Yun, James J

2016-12-01

A lack of donor hearts remains a major limitation of heart transplantation. Hearts from Centers for Disease Control (CDC) high-risk donors can be utilized with specific recipient consent. However, outcomes of heart transplantation with CDC high-risk donors are not well known. We sought to define outcomes, including posttransplant hepatitis and human immunodeficiency virus (HIV) status, in recipients of CDC high-risk donor hearts at our institution. All heart transplant recipients from August 2010 to December 2014 (n = 74) were reviewed. Comparison of 1) CDC high-risk donor (HRD) versus 2) standard-risk donor (SRD) groups were performed using chi-squared tests for nominal data and Wilcoxon two-sample tests for continuous variables. Survival was estimated with Kaplan-Meier curves. Of 74 heart transplant recipients reviewed, 66 (89%) received a SRD heart and eight (11%) received a CDC HRD heart. We found no significant differences in recipient age, sex, waiting list 1A status, pretransplant left ventricular assist device (LVAD) support, cytomegalovirus (CMV) status, and graft ischemia times (p = NS) between the HRD and SRD groups. All of the eight HRD were seronegative at the time of transplant. Postoperatively, there was no significant difference in rejection rates at six and 12 months posttransplant. Importantly, no HRD recipients acquired hepatitis or HIV. Survival in HRD versus SRD recipients was not significantly different by Kaplan-Meier analysis (log rank p = 0.644) at five years posttransplant. Heart transplants that were seronegative at the time of transplant had similar posttransplant graft function, rejection rates, and five-year posttransplant survival versus recipients of SRD hearts. At our institution, no cases of hepatitis or HIV occurred in HRD recipients in early follow-up. © 2016 Wiley Periodicals, Inc.

Effect of risedronate on bone in renal transplant recipients.

Science.gov (United States)

Coco, Maria; Pullman, James; Cohen, Hillel W; Lee, Sally; Shapiro, Craig; Solorzano, Clemencia; Greenstein, Stuart; Glicklich, Daniel

2012-08-01

Bisphosphonates may prevent or treat the bone loss promoted by the immunosuppressive regimens used in renal transplantation. Risedronate is a commonly used third-generation amino-bisphosphonate, but little is known about its effects on the bone health of renal transplant recipients. We randomly assigned 42 new living-donor kidney recipients to either 35 mg of risedronate weekly or placebo for 12 months. We obtained bone biopsies at the time of renal transplant and after 12 months of protocol treatment. Treatment with risedronate did not affect bone mineral density (BMD) in the overall cohort. In subgroup analyses, it tended to preserve BMD in female participants but did not significantly affect the BMD of male participants. Risedronate did associate with increased osteoid volume and trabecular thickness in male participants, however. There was no evidence for the development of adynamic bone disease. In summary, further study is needed before the use of prophylactic bisphosphonates to attenuate bone loss can be recommended in renal transplant recipients.

A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

Science.gov (United States)

Huang, Che-Wei; Huang, Yu-Jie; Lu, Shey-Shi; Lin, Chih-Ting

2012-01-01

A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC) architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm) integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK) wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH) range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

Towards Improving the Transfer of Care of Kidney Transplant Recipients.

Science.gov (United States)

Gill, J S; Wright, A J; Delmonico, F L; Newell, K A

2017-01-01

Kidney transplant recipients require specialized medical care and may be at risk for adverse health outcomes when their care is transferred. This document provides opinion-based recommendations to facilitate safe and efficient transfers of care for kidney transplant recipients including minimizing the risk of rejection, avoidance of medication errors, ensuring patient access to immunosuppressant medications, avoidance of lapses in health insurance coverage, and communication of risks of donor disease transmission. The document summarizes information to be included in a medical transfer document and includes suggestions to help the patient establish an optimal therapeutic relationship with their new transplant care team. The document is intended as a starting point towards standardization of transfers of care involving kidney transplant recipients. © Copyright 2016 The American Society of Transplantation and the American Society of Transplant Surgeons.

31 CFR 208.8 - Recipient responsibilities.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Recipient responsibilities. 208.8 Section 208.8 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY FINANCIAL MANAGEMENT SERVICE MANAGEMENT OF FEDERAL AGENCY...

Aortic Valve Replacement for Infective Endocarditis in a Renal Transplant Recipient

Directory of Open Access Journals (Sweden)

Masmoudi Sayda

2000-01-01

Full Text Available Renal transplant recipients are more prone to developing infections. We report a 37-year old renal transplant recipient who developed infective endocarditis of the aortic valve, heart failure and renal allograft dysfunction. He underwent aortic valve replacement which was followed by improvement in cardiac as well as allograft function.

14 CFR 1274.205 - Consortia as recipients.

Science.gov (United States)

2010-01-01

... better share the projects financial costs (e.g., the 50 percent recipient's cost share or other costs of... should also address to the extent appropriate— (1) Commitments of financial, personnel, facilities and...

An observational study of health literacy and medication adherence in adult kidney transplant recipients.

Science.gov (United States)

Demian, Maryam N; Shapiro, R Jean; Thornton, Wendy Loken

2016-12-01

There is a high prevalence of non-adherence to immunosuppressants in kidney transplant recipients. Although limited health literacy is common in kidney recipients and is linked to adverse outcomes in other medical populations, its effect on medication adherence in kidney transplant recipients remains poorly understood. The objective was to investigate the effect of lower health literacy on immunosuppressant adherence. Kidney recipients who were at least 6 months post-transplant and outpatients of Vancouver General Hospital in B.C., Canada were recruited through invitation letters. A total of 96 recipients completed the Health Literacy Questionnaire, which provides a multifactorial profile of self-reported health literacy and the Transplant Effects Questionnaire-Adherence subscale measuring self-reported immunosuppressant adherence. Hierarchical linear regression was used to analyze the association between health literacy and adherence after controlling for identified risk factors of non-adherence. Our sample was on average 53 years old, 56% male and 9 years post-transplant. Kidney recipients reported low levels of health literacy on scales measuring active health management and critical appraisal of information and 75% reported non-perfect adherence. Worse adherence was associated with poorer overall health literacy (Δ R 2 = 0.08, P = 0.004) and lower scores on six of nine of the health literacy factors. Poorer health literacy is associated with lower immunosuppressant adherence in adult kidney transplant recipients suggesting the importance of considering a recipient's level of health literacy in research and clinical contexts. Medication adherence interventions can target the six factors of health literacy identified as being risk factors for lower medication adherence.

The impact of care recipient falls on caregivers.

Science.gov (United States)

Dow, Briony; Meyer, Claudia; Moore, Kirsten J; Hill, Keith D

2013-05-01

This study sought to explore the impact of care recipient falls on caregivers. Ninety-six community-dwelling caregiver-care recipient dyads participated in a 12-month prospective study. Falls and other accidents and service use were recorded. Dyads were assessed at baseline and after each fall. Assessment included the Zarit Burden Interview and a post-accident survey developed for the present study. Focus groups were then conducted to further explore the impact of falls on caregivers. Fifty-four care recipients (56%) experienced falls within the 12 months of the study. There was a significant increase in caregiver burden after the first fall (Zarit Burden Interview score increased from 24.2±14.2 to 27.6±14.5, Precipient alone. However, there was no increase in the number of services used. Focus group discussions highlighted the need for constant vigilance of the care recipient, a lack of knowledge about support services and concerns related to utilising respite care. Falls among care recipients have a significant impact on carers, including an increased fear of falling, prompting the need for even closer vigilance. WHAT IS KNOWN ABOUT THE TOPIC? Falls are a significant problem for older people as one in three older people fall each year and injurious falls are the leading cause of injury-related hospitalisation in older people. In Australia falls cost the economy over $500 million per year. WHAT DOES THIS PAPER ADD? This paper adds a unique perspective to the falls literature, that of the older person's carer. Falls are a significant problem for community-dwelling carers of older people, contributing to carer burden and impeding the carer's ability to undertake activities of daily living because of the perceived need for constant vigilance to prevent the person they care for from falling. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Practitioners should ensure that carers are aware of evidence-based falls-prevention practices and services, such as group and

Percutaneous Dilational Tracheotomy in Solid-Organ Transplant Recipients.

Science.gov (United States)

Ozdemirkan, Aycan; Ersoy, Zeynep; Zeyneloglu, Pinar; Gedik, Ender; Pirat, Arash; Haberal, Mehmet

2015-11-01

Solid-organ transplant recipients may require percutaneous dilational tracheotomy because of prolonged mechanical ventilation or airway issues, but data regarding its safety and effectiveness in solid-organ transplant recipients are scarce. Here, we evaluated the safety, effectiveness, and benefits in terms of lung mechanics, complications, and patient comfort of percutaneous dilational tracheotomy in solid-organ transplant recipients. Medical records from 31 solid-organ transplant recipients (median age of 41.0 years [interquartile range, 18.0-53.0 y]) who underwent percutaneous dilational tracheotomy at our hospital between January 2010 and March 2015 were analyzed, including primary diagnosis, comorbidities, duration of orotracheal intubation and mechanical ventilation, length of intensive care unit and hospital stays, the time interval between transplant to percutaneous dilational tracheotomy, Acute Physiology and Chronic Health Evaluation II score, tracheotomy-related complications, and pulmonary compliance and ratio of partial pressure of arterial oxygen to fraction of inspired oxygen. The median Acute Physiology and Chronic Health Evaluation II score on admission was 24.0 (interquartile range, 18.0-29.0). The median interval from transplant to percutaneous dilational tracheotomy was 105.5 days (interquartile range, 13.0-2165.0 d). The only major complication noted was left-sided pneumothorax in 1 patient. There were no significant differences in ratio of partial pressure of arterial oxygen to fraction of inspired oxygen before and after procedure (170.0 [interquartile range, 102.2-302.0] vs 210.0 [interquartile range, 178.5-345.5]; P = .052). However, pulmonary compliance results preprocedure and postprocedure were significantly different (0.020 L/cm H2O [interquartile range, 0.015-0.030 L/cm H2O] vs 0.030 L/cm H2O [interquartile range, 0.020-0.041 L/cm H2O); P = .001]). Need for sedation significantly decreased after tracheotomy (from 17 patients [54.8%] to

Development of Graft-Site Candidiasis in 3 Solid Organ Transplant Recipients from the Same Donor.

Science.gov (United States)

El-Bandar, Nasrin; Kroy, Daniela C; Fuller, Tom Florian; Kramer, Jürgen; Liefeldt, Lutz; Budde, Klemens; Blobel, Conrad; Miller, Kurt; Friedersdorff, Frank

2017-07-11

BACKGROUND Graft-site candidiasis rarely develops in solid organ transplant recipients; however, severe life-threatening complications can occur. We report the course of 3 solid organ transplant recipients developing graft-site candidiasis. CASE REPORT All grafts, consisting of 2 kidneys and 1 liver, were procured from a single donor. Patient data were collected from our database. Candida albicans was isolated from a swab taken during multiple-organ recovery. Complications associated with candidiasis occurred in all 3 recipients with preservation of the liver transplant. Both renal transplant recipients had vascular complications, eventually resulting in graft nephrectomy and subsequent return to dialysis. The patients recovered completely without residual effects of their prior fungal infection. CONCLUSIONS Fungal infections in solid organ transplant recipients are rare. Since the sequelae of these infections are serious and usually pertain to more than 1 recipient at a time, antifungal prophylaxis may be warranted in select donors.

Outcomes of hematopoietic cell transplantation using donors or recipients with inherited chromosomally integrated HHV-6.

Science.gov (United States)

Hill, Joshua A; Magaret, Amalia S; Hall-Sedlak, Ruth; Mikhaylova, Anna; Huang, Meei-Li; Sandmaier, Brenda M; Hansen, John A; Jerome, Keith R; Zerr, Danielle M; Boeckh, Michael

2017-08-24

Human herpesvirus 6 (HHV-6) species have a unique ability to integrate into chromosomal telomeres. Mendelian inheritance via gametocyte integration results in HHV-6 in every nucleated cell. The epidemiology and clinical effect of inherited chromosomally integrated HHV-6 (iciHHV-6) in hematopoietic cell transplant (HCT) recipients is unclear. We identified 4319 HCT donor-recipient pairs (8638 subjects) who received an allogeneic HCT and had archived pre-HCT peripheral blood mononuclear cell samples. We screened these samples for iciHHV-6 and compared characteristics of HCT recipients and donors with iciHHV-6 with those of recipients and donors without iciHHV-6, respectively. We calculated Kaplan-Meier probability estimates and Cox proportional hazards models for post-HCT outcomes based on recipient and donor iciHHV-6 status. We identified 60 HCT recipients (1.4%) and 40 donors (0.9%) with iciHHV-6; both recipient and donor harbored iciHHV-6 in 13 HCTs. Thus, there were 87 HCTs (2%) in which the recipient, donor, or both harbored iciHHV-6. Acute graft-versus-host disease (GVHD) grades 2-4 was more frequent when recipients or donors had iciHHV-6 (adjusted hazard ratios, 1.7-1.9; P = .004-.001). Cytomegalovirus viremia (any and high-level) was more frequent among recipients with iciHHV-6 (adjusted HRs, 1.7-3.1; P = .001-.040). Inherited ciHHV-6 status did not significantly affect risk for chronic GVHD, hematopoietic cell engraftment, overall mortality, or nonrelapse mortality. Screening for iciHHV-6 could guide donor selection and post-HCT risk stratification and treatment. Further study is needed to replicate these findings and identify potential mechanisms. © 2017 by The American Society of Hematology.

The Relationship Between Mental Representations of Welfare Recipients and Attitudes Toward Welfare

NARCIS (Netherlands)

Brown-Iannuzzi, Jazmin L; Dotsch, Ron; Cooley, Erin; Payne, B Keith

2016-01-01

Scholars have argued that opposition to welfare is, in part, driven by stereotypes of African Americans. This argument assumes that when individuals think about welfare, they spontaneously think about Black recipients. We investigated people's mental representations of welfare recipients. In Studies

The relationship between mental representations of welfare recipients and attitudes toward welfare

NARCIS (Netherlands)

Brown-Iannuzzi, J.L.; Dotsch, R.; Cooley, E.; Payne, B.K.

2017-01-01

Scholars have argued that opposition to welfare is, in part, driven by stereotypes of African Americans. This argument assumes that when individuals think about welfare, they spontaneously think about Black recipients. We investigated people's mental representations of welfare recipients. In Studies

Association of Donor and Recipient Telomere Length with Clinical Outcomes following Lung Transplantation.

Science.gov (United States)

Courtwright, Andrew M; Fried, Sabrina; Villalba, Julian A; Moniodis, Anna; Guleria, Indira; Wood, Isabelle; Milford, Edgar; Mallidi, Hari H; Hunninghake, Gary M; Raby, Benjamin A; Agarwal, Suneet; Camp, Philip C; Rosas, Ivan O; Goldberg, Hilary J; El-Chemaly, Souheil

2016-01-01

Patients with short telomere syndromes and pulmonary fibrosis have increased complications after lung transplant. However, the more general impact of donor and recipient telomere length in lung transplant has not been well characterized. This was an observational cohort study of patients who received lung transplant at a single center between January 1st 2012 and January 31st 2015. Relative donor lymphocyte telomere length was measured and classified into long (third tertile) and short (other tertiles). Relative recipient lung telomere length was measured and classified into short (first tertile) and long (other tertiles). Outcome data included survival, need for modification of immunosuppression, liver or kidney injury, cytomegalovirus reactivation, and acute rejection. Recipient lung tissue telomere lengths were measured for 54 of the 79 patients (68.3%) who underwent transplant during the study period. Donor lymphocyte telomeres were measured for 45 (83.3%) of these recipients. Neither long donor telomere length (hazard ratio [HR] = 0.58, 95% confidence interval [CI], 0.12-2.85, p = 0.50) nor short recipient telomere length (HR = 1.01, 95% CI = 0.50-2.05, p = 0.96) were associated with adjusted survival following lung transplant. Recipients with short telomeres were less likely to have acute cellular rejection (23.5% vs. 58.8%, p = 0.02) but were not more likely to have other organ dysfunction. In this small cohort, neither long donor lymphocyte telomeres nor short recipient lung tissue telomeres were associated with adjusted survival after lung transplantation. Larger studies are needed to confirm these findings.

Use of the Performance Diagnostic Checklist to Select an Intervention Designed to Increase the Offering of Promotional Stamps at Two Sites of a Restaurant Franchise

Science.gov (United States)

Rodriguez, Manuel; Wilder, David A.; Therrien, Kelly; Wine, Byron; Miranti, Reylissa; Daratany, Kenneth; Salume, Gloria; Baranovsky, Greg; Rodriquez, Matias

2006-01-01

The performance diagnostic checklist (PDC) was administered to examine the variables influencing the offering of promotional stamps by employees at two sites of a restaurant franchise. PDC results suggested that a lack of appropriate antecedents, equipment and processes, and consequences were responsible for the deficits. Based on these results,…

Herpes simplex virus-2 transmission following solid organ transplantation: Donor-derived infection and transplantation from prior organ recipients.

Science.gov (United States)

Macesic, Nenad; Abbott, Iain J; Kaye, Matthew; Druce, Julian; Glanville, Allan R; Gow, Paul J; Hughes, Peter D; Korman, Tony M; Mulley, William R; O'Connell, Phillip J; Opdam, Helen; Paraskeva, Miranda; Pitman, Matthew C; Setyapranata, Stella; Rawlinson, William D; Johnson, Paul D R

2017-10-01

Owing to limited availability of donor organs, previous solid organ transplant (SOT) recipients are increasingly considered as potential organ donors. We report donor-derived transmission of herpes simplex virus type-2 (HSV-2) to two clusters of SOT recipients with transmission from the original donor and an HSV-2-infected recipient who subsequently became a donor. We reviewed medical records of the donors and recipients in both clusters. Pre-transplant serology and virological features of HSV-2 were characterized. Genotyping of HSV-2 isolates to determine potential for donor transmission of HSV-2 through transplantation of organs from prior organ recipients was performed. A kidney-pancreas recipient died day 9 post transplant. Following confirmation of brain death, the lungs and recently transplanted kidney were donated to two further recipients. The liver was not retrieved, but biopsy confirmed HSV-2 infection. Testing on the original donor showed negative HSV-2 polymerase chain reaction and HSV immunoglobulin (Ig)M, but positive HSV-2 IgG. The liver recipient from the original donor developed HSV-2 hepatitis and cutaneous infection that responded to treatment with intravenous acyclovir. In the second cluster, lung and kidney recipients both developed HSV-2 viremia that was successfully treated with antiviral therapy. Genotyping of all HSV-2-positive samples showed 100% sequence homology for three recipients. Donor-derived HSV infection affected two clusters of recipients because of transplantation of organs from a prior organ recipient. HSV should be considered as a possible cause of illness in febrile SOT recipients in the immediate post-transplant period and may cause disseminated disease and re-infection in HSV-2-seropositive recipients. Testing of HSV serology and prophylaxis may be considered in SOT recipients not receiving cytomegalovirus prophylaxis. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

34 CFR 74.41 - Recipient responsibilities.

Science.gov (United States)

2010-07-01

... to Federal, State or local authority that may have proper jurisdiction. (Authority: 20 U.S.C. 1221e-3... Procurement Standards § 74.41 Recipient responsibilities. The standards contained in this section do not... the responsible authority, without recourse to the Secretary, regarding the settlement and...

[Loudness optimized registration of compound action potential in cochlear implant recipients].

Science.gov (United States)

Berger, Klaus; Hocke, Thomas; Hessel, Horst

2017-11-01

Background Postoperative measurements of compound action potentials are not always possible due to the insufficient acceptance of the CI-recipients. This study investigated the impact of different parameters on the acceptance of the measurements. Methods Compound action potentials of 16 CI recipients were measured with different pulse-widths. Recipients performed a loudness rating at the potential thresholds with the different sequences. Results Compound action potentials obtained with higher pulse-widths were rated softer than those obtained with smaller pulse-widths. Conclusions Compound action potentials measured with higher pulse-widths generate a gap between loudest acceptable presentation level and potential threshold. This gap contributes to a higher acceptance of postoperative measurements. Georg Thieme Verlag KG Stuttgart · New York.

An Algorithm Measuring Donor Cell-Free DNA in Plasma of Cellular and Solid Organ Transplant Recipients That Does Not Require Donor or Recipient Genotyping

Directory of Open Access Journals (Sweden)

Paul MK Gordon

2016-09-01

Full Text Available Cell-free DNA (cfDNA has significant potential in the diagnosis and monitoring of clinical conditions but accurately and easily distinguishing the relative proportion of DNA molecules in a mixture derived from two different sources (i.e. donor and recipient tissues after transplantation is challenging. In human cellular transplantation there is currently no useable method to detect in vivo engraftment and blood-based non-invasive tests for allograft rejection in solid organ transplantation are either non-specific (e.g. creatinine in kidney transplantation, liver enzymes in hepatic transplantation or absent (i.e. heart transplantation. Elevated levels of donor cfDNA have been shown to correlate with solid organ rejection but complex methodology limits implementation of this promising biomarker. We describe a cost-effective method to quantify donor cfDNA in recipient plasma using a panel of high-frequency single nucleotide polymorphisms, next-generation (semiconductor sequencing and a novel mixture model algorithm. In vitro, our method accurately and rapidly determined donor/recipient DNA admixture. For in vivo testing, donor cfDNA was serially quantified in an infant with a urea cycle disorder after receiving six daily infusions of donor liver cells. Donor cfDNA isolated from 1-2 ml of recipient plasma was detected as late as 24 weeks after infusion suggesting engraftment. The percentage of circulating donor cfDNA was also assessed in pediatric and adult heart transplant recipients undergoing routine endomyocardial biopsy with levels observed to be stable over time and generally measuring <1% in cases without moderate or severe cellular rejection. Unlike existing non-invasive methods used to define the proportion of donor cfDNA in solid organ transplant patients, our assay does not require sex mismatch, donor genotyping or whole-genome sequencing and potentially has broad application to detect cellular engraftment or allograft injury after

Low Adherence to Immunosuppressants Is Associated With Symptom Experience Among Kidney Transplant Recipients.

Science.gov (United States)

Lee, S Y; Chu, S H; Oh, E G; Huh, K H

2015-11-01

The purpose of this study was to investigate the relationship between immunosuppressant-related symptom experience (SE) and adherence to immunosuppressant regimens among kidney transplant (KT) recipients. A total of 239 KT recipients on an immunosuppressant regimen who were followed up after transplantation participated in this study. Data was collected through a self-reported questionnaire survey (medication adherence, SE, and quality of life) and medical record review. Low adherence in the immunosuppressant group was associated with longer time since KT, less comorbidity (adherence among KT recipients showed significantly greater overall symptom occurrence (P = .001) and symptom distress (P = .002) levels than patients with high or medium adherence after adjusting for a number of covariates. The most common symptom both in terms of occurrence (96.4%) and distress (91.1%) among poorly adherent KT recipients was tiredness. Low adherence to an immunosuppressant regimen was significantly associated with high SE among KT recipients. Strategies to decrease immunosuppressant-related SE are needed to improve adherence to immunosuppressants. Copyright © 2015 Elsevier Inc. All rights reserved.

Finite element analysis and optimization of process parameters during stamp forming of composite materials

International Nuclear Information System (INIS)

Venkatesan, S; Kalyanasundaram, S

2010-01-01

In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

Music appreciation and music listening in prelingual and postlingually deaf adult cochlear implant recipients.

Science.gov (United States)

Moran, Michelle; Rousset, Alexandra; Looi, Valerie

2016-01-01

To explore the music appreciation of prelingually deaf adults using cochlear implants (CIs). Cohort study. Adult CI recipients were recruited based on hearing history and asked to complete the University of Canterbury Music Listening Questionnaire (UCMLQ) to assess each individual's music listening and appreciation. Results were compared to previous responses to the UCMLQ from a large cohort of postlingually deaf CI recipients. Fifteen prelingually deaf and 15 postlingually deaf adult cochlear implant recipients. No significant differences were found between the prelingual and postlingual participants for amount of music listening or music listening enjoyment with their CI. Sound quality of common instruments was favourable for both groups, with no significant difference in the pleasantness/naturalness of instrument sounds between the groups. Prelingually deaf CI recipients rated themselves as significantly less able to follow a melody line and identify instrument styles compared to their postlingual peers. The results suggest that the pre- and postlingually deaf CI recipients demonstrate equivalent levels of music appreciation. This finding is of clinical importance, as CI clinicians should be actively encouraging all of their recipients to explore music listening as a part of their rehabilitation.

Using perforators as recipient vessels (supermicrosurgery) for free flap reconstruction of the knee region.

Science.gov (United States)

Hong, Joon Pio; Koshima, Isao

2010-03-01

The purpose of this article is to evaluate the feasibility of a perforator as a recipient vessel to reconstruct soft tissue defects of the knee region.From December of 2006 to August of 2008, total of 25 patients underwent reconstructive procedure using either an anterolateral thigh or an upper medial thigh perforator flap. The flaps were anastomosed in a perforator to perforator manner using supermicrosurgery technique.Minimum of 3 perforators were traced around the knee defect. All flaps survived attached to a recipient perforator with artery diameter ranging from 0.4 to 0.9 mm and accompanying veins ranging from 0.4 to 1.2 mm. This approach allowed reduction in time for pedicle and recipient vessel dissection and minimized the trauma involved during isolation of the vessels.Using the perforator as recipient vessel allows an increase in selection for choice of recipient. By using a perforator as recipient, less time is consumed to secure the vessel, does not need long pedicles for flap, is not bound by the condition of major arteries, and minimizes any risk for major vessel injury while having acceptable flap survival.

Accuracy of Cochlear Implant Recipients on Speech Reception in Background Music

Science.gov (United States)

Gfeller, Kate; Turner, Christopher; Oleson, Jacob; Kliethermes, Stephanie; Driscoll, Virginia

2012-01-01

Objectives This study (a) examined speech recognition abilities of cochlear implant (CI) recipients in the spectrally complex listening condition of three contrasting types of background music, and (b) compared performance based upon listener groups: CI recipients using conventional long-electrode (LE) devices, Hybrid CI recipients (acoustic plus electric stimulation), and normal-hearing (NH) adults. Methods We tested 154 LE CI recipients using varied devices and strategies, 21 Hybrid CI recipients, and 49 NH adults on closed-set recognition of spondees presented in three contrasting forms of background music (piano solo, large symphony orchestra, vocal solo with small combo accompaniment) in an adaptive test. Outcomes Signal-to-noise thresholds for speech in music (SRTM) were examined in relation to measures of speech recognition in background noise and multi-talker babble, pitch perception, and music experience. Results SRTM thresholds varied as a function of category of background music, group membership (LE, Hybrid, NH), and age. Thresholds for speech in background music were significantly correlated with measures of pitch perception and speech in background noise thresholds; auditory status was an important predictor. Conclusions Evidence suggests that speech reception thresholds in background music change as a function of listener age (with more advanced age being detrimental), structural characteristics of different types of music, and hearing status (residual hearing). These findings have implications for everyday listening conditions such as communicating in social or commercial situations in which there is background music. PMID:23342550

Stability and longevity in the publication careers of U.S. doctorate recipients

Energy Technology Data Exchange (ETDEWEB)

Waaijer, C.J.F.; Macaluso, B.; Sugimoto, C.R.; Larivière, V.

2016-07-01

Since the 1950s, the number of doctorate recipients has risen dramatically in the United States. In this paper, we investigate whether the longevity of doctorate recipients’ publication careers has changed. This is achieved by matching 1951-2010 doctorate recipients in astrophysics, chemistry, economics, genetics and psychology with rare names in the dissertation database ProQuest to their publications in the publication database Web of Science. Our study shows that post-PhD publication career spans have not changed much in most fields, with the share of doctorate recipients who have published for over twenty years having remained stable over time. (Author)

Eco-logical grant recipient peer exchange report

Science.gov (United States)

2012-05-15

On March 21-22, 2012, the Federal Highway Administration (FHWA) Office of Project Development and Environmental Review sponsored a two-day peer exchange to convene recipients of FHWA Eco-Logical grants whose projects achieved noteworthy accomplishmen...

A general dead-time correction method based on live-time stamping. Application to the measurement of short-lived radionuclides.

Science.gov (United States)

Chauvenet, B; Bobin, C; Bouchard, J

2017-12-01

Dead-time correction formulae are established in the general case of superimposed non-homogeneous Poisson processes. Based on the same principles as conventional live-timed counting, this method exploits the additional information made available using digital signal processing systems, and especially the possibility to store the time stamps of live-time intervals. No approximation needs to be made to obtain those formulae. Estimates of the variances of corrected rates are also presented. This method is applied to the activity measurement of short-lived radionuclides. Copyright © 2017 Elsevier Ltd. All rights reserved.

The reduction of irregularities in the use of “process fmea”: a study for a cold stamping process

Directory of Open Access Journals (Sweden)

Carla Estorilio

2011-12-01

Full Text Available The Failure Mode and Effect Analysis (FMEA is a requirement for ISO/TS 16949. However, researches show nonconformities in its use by automotive suppliers. The objective of this study is to identify these nonconformities, aiming to suggest methods for minimizing this problem. Therefore, questionnaires were applied in seven automotive suppliers and, for each one, ten FMEA`s were analysed. The research identified nonconformities in the use of FMEA for the stamping process and highlighted seven influencing factors. Based on this data, a strategy is suggested. A partially parameterised FMEA spreadsheet is suggested and tested in three suppliers, showing significant improvements.

38 CFR 21.6001 - Temporary vocational training program for certain pension recipients.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Temporary vocational training program for certain pension recipients. 21.6001 Section 21.6001 Pensions, Bonuses, and Veterans... Program of Vocational Training for Certain New Pension Recipients General § 21.6001 Temporary vocational...

Cytomegalovirus disease in renal transplant recipients: a single-center experience.

Science.gov (United States)

Bhadauria, Dharmendra; Sharma, R K; Kaul, A; Prasad, Narayan; Gupta, Amit; Gupta, Anurag; Srivastava, Aneesh

2012-09-01

Cytomegalovirus (CMV) is the most common viral infection following kidney transplant, has been recognized as a major factor for graft loss and increased incidence of acute rejection. Different studies have reported a variable incidence of CMV disease with the use of Mycophenolate mofetil (MMF). We retrospectively analyzed our renal transplant recipients to review the results of CMV disease and to compare CMV disease in patient on Azathioprine and MMF for this purpose we retrospectively reviewed 521 live related kidney transplant recipients at our institute. 74 (14.2 %) live related allograft recipients developed CMV disease after a median interval of 7.18 ± 4.35 months from transplantation. The mean age was 36.15 ± 10.7 years. 63 of the patients were male. Malaise, fever and diarrhea were among most common symptoms. 20 (27.02 %) of the 74 recipients developed transaminitis, 13 (17.2 %) developed CMV gastritis, 5 (9.13 %) recipients developed pneumonia, and 3 (4.05 %) patient developed colitis. 59 (80 %) patients had leucopenia and 41 (56.5 %) developed thrombocytopenia. Mean serum creatinine level was 1.5 ± 0.4 (0.9-2.4) mg/dl before the disease, 1.9 ± 0.6 (1.3-3.6) mg/dl at the time of the diagnosis, and 1.7 ± 0.06 (0.8-4.2) mg/dl at the end of the treatment. CMV disease developed in 9 (36 %) of recipients who received basiliximab as induction therapy and 13 (30.24 %) of recipients who received ATG (p > 0.05). The incidence of CMV disease was similar in cyclosporine based regimen (13.2 %) and Tacrolimus based regimen 27 (16.16 %) (p = 0.137) and was also similar in Azathioprine 41 (9.5 %) and MMF group 33 (14.3 %) (p = 0.163). There was no significant difference in severity of CMV disease in both groups, except a higher incidence of leucopenia in Azathioprine group (86 vs. 74 %, p < 0.05) as compared to MMF group. 51 (68.91 %) patient developed graft dysfunction during CMV disease. In conclusion we report a low incidence

New electronics for the surface detectors of the Pierre Auger Observatory

Energy Technology Data Exchange (ETDEWEB)

Kleifges, M., E-mail: Matthias.Kleifges@kit.edu [Karlsruhe Institute of Technology – Institute for Data Processing and Electronics, Karlsruhe (Germany)

2016-07-11

The Pierre Auger Observatory is the largest installation worldwide for the investigation of ultra-high energy cosmic rays. Air showers are detected using a hybrid technique with 27 fluorescence telescopes and 1660 water-Cherenkov detectors (WCD) distributed over about 3000 km{sup 2}. The Auger Collaboration has decided to upgrade the electronics of the WCD and complement the surface detector with scintillators (SSD). The objective is to improve the separation between the muonic and the electron/photon shower component for better mass composition determination during an extended operation period of 8–10 years. The surface detector electronics records data locally and generates time stamps based on the GPS timing. The performance of the detectors is significantly improved with a higher sampling rate, an increased dynamic range, new generation of GPS receivers, and FPGA integrated CPU power. The number of analog channels will be increased to integrate the new SSD, but the power consumption needs to stay below 10 W to be able to use the existing photovoltaic system. In this paper, the concept of the additional SSD is presented with a focus on the design and performance of the new surface detector electronics.

Late Acute Rejection Occuring in Liver Allograft Recipients

Directory of Open Access Journals (Sweden)

Eric M Yoshida

1996-01-01

Full Text Available To study the effect of immunosuppressive reduction on the incidence and consequence of late acute rejection (LAR in liver allograft recipients, mean daily prednisone dose, mean cyclosporine A (CsA trough and nadir levels were retrospectively reviewed for the nearest 12-week period preceding six episodes of LAR in five liver allograft recipients (group 1. Results were compared with those from a cohort of 12 liver allograft recipients who did not develop LAR (group 2. LAR was defined as acute rejection occurring more than 365 days post-transplantation. Median follow-up for both groups was similar (504 days, range 367 to 1050, versus 511 days, range 365 to 666, not significant. Mean trough CsA levels were lower in patients with LAR compared with those without (224±66 ng/mL versus 233±49 ng/mL but the difference was not statistically significant. In contrast, mean daily prednisone dose (2.5±1.6 mg/ day versus 6.5±2.9 mg/day, P=0.007 and CsA nadir values (129±60 ng/mL versus 186±40 ng/mL, P=0.03 were significantly lower in patients who developed LAR compared with those who did not. Five of six episodes (83% of LAR occurred in patients receiving less than 5 mg/day of prednisone, versus a single LAR episode in only one of 12 patients (8% receiving prednisone 5 mg/day or more (P=0.004. In all but one instance, LAR responded to pulse methylprednisolone without discernible affect on long term graft function. The authors conclude that liver allograft recipients remain vulnerable to acute rejection beyond the first post-transplant year; and reduction of immunosuppressive therapy, particularly prednisone, below a critical, albeit low dose, threshold increases the risk of LAR.

A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

Directory of Open Access Journals (Sweden)

Chih-Ting Lin

2012-08-01

Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

Kaposi's sarcoma in renal transplant recipients

African Journals Online (AJOL)

The cause of the increased frequency of KS among renal transplant recipients is multifactorial: (l) genetic predisposition, i.e. increased incidence of specific lll.A types; (il) chronic immunostimulation in the presence of. T-cell dysfunction; (iil) proliferation of suppressor cells with the production of specific growth factors; and (iv).

45 CFR 2543.41 - Recipient responsibilities.

Science.gov (United States)

2010-10-01

... violation of statute are to be referred to such Federal, State or local authority as may have proper... under its contract(s). The recipient is the responsible authority, without recourse to the Federal... arising out of procurements entered into in support of an award or other agreement. This includes disputes...

Sirolimus-associated interstitial pneumonitis in a liver transplant recipient

International Nuclear Information System (INIS)

Claire Berrouet, Marie; Aristizabal, Julian Miguel; Restrepo, Juan Carlos; Correa, Gonzalo

2005-01-01

Sirolimus is an immunosuppressive drug that has been used during the past few years. Sirolimus is indicated in rescue therapies and to reduce the secondary toxic effects of calcineurin inhibitors. This drug has been associated with infrequent but severe pulmonary toxicity. Cases of interstitial pneumonitis, bronchiolitis obliterans with organizing pneumonia, and alveolar proteinosis have been described. We describe a case of pulmonary toxicity associated with the use of sirolimus in a 59-yr-old liver transplant recipient. We also review all reported cases of sirolimus-associated lung toxicity among liver transplantation recipients, with the intention of understanding the risk factors, the clinical picture and the outcomes of this complication. Five cases have been reported since January 2000, including the present case. Clinical presentation is similar, with fever, dyspnoea, fatigue, cough, and hemoptysis. Discontinuation of the drug led to resolution of clinical and radiographic findings. Sirolimus-induced pulmonary toxicity is a serious condition and should be considered in the differential diagnosis of liver recipients presenting with respiratory findings. Discontinuation of the drug is associated with resolution of the pulmonary compromise

MAGIC Study: Aims, Design and Methods using SystemCHANGE™ to Improve Immunosuppressive Medication Adherence in Adult Kidney Transplant Recipients.

Science.gov (United States)

Russell, Cynthia L; Moore, Shirley; Hathaway, Donna; Cheng, An-Lin; Chen, Guoqing; Goggin, Kathy

2016-07-16

Among adult kidney transplant recipients, non-adherence to immunosuppressive medications is the leading predictor of poor outcomes, including rejection, kidney loss, and death. An alarming one-third of kidney transplant patients experience medication non-adherence even though the problem is preventable. Existing adherence interventions have proven marginally effective for those with acute and chronic illnesses and ineffective for adult kidney transplant recipients. Our purpose is to describe the design and methods of the MAGIC (Medication Adherence Given Individual SystemCHANGE™) trial We report the design of a randomized controlled trial with an attention-control group to test an innovative 6-month SystemCHANGE™ intervention designed to enhance immunosuppressive medication adherence in adult non-adherent kidney transplant recipients from two transplant centers. Grounded in the Socio-Ecological Model, SystemCHANGE™ seeks to systematically improve medication adherence behaviors by identifying and shaping routines, involving supportive others in routines, and using medication taking feedback through small patient-led experiments to change and maintain behavior. After a 3-month screening phase of 190 eligible adult kidney transplant recipients, those who are adherent as measured by electronic monitoring, will be randomized into a 6-month SystemCHANGE™ intervention or attention-control phase, followed by a 6-month maintenance phase without intervention or attention. Differences in adherence between the two groups will be assessed at baseline, 6 months (intervention phase) and 12 months (maintenance phase). Adherence mediators (social support, systems-thinking) and moderators (ethnicity, perceived health) are examined. Patient outcomes (creatinine/blood urea nitrogen, infection, acute/chronic rejection, graft loss, death) and cost effectiveness are to be examined. Based on the large effect size of 1.4 found in our pilot study, intervention shows great promise

Scrub typhus meningitis in a renal transplant recipient

Directory of Open Access Journals (Sweden)

J Dhanapriya

2017-01-01

Full Text Available Scrub typhus is a rickettsial infection commonly seen in Asia. The clinical presentation ranges from nonspecific febrile illness to potentially fatal multiorgan involvement such as liver, kidney, or lung. Central nervous system involvement is uncommon. We report a 45-year-old female renal transplant recipient who presented with fever, headache, meningeal signs, graft dysfunction, and eschar. IgM antibodies against Orientia tsutsugamushi were positive by enzyme-linked immunosorbent assay. Despite oral doxycycline therapy for 5 days, she did not improve but responded well to intravenous azithromycin. To the best of our knowledge, scrub typhus as a cause of meningitis in a renal transplant recipient has not been reported so far.

Programmatic challenges in obtaining and confirming the pneumococcal vaccination status of cochlear implant recipients.

Science.gov (United States)

Carpenter, Ryan M; Limb, Charles J; Francis, Howard W; Gottschalk, Barbara; Niparko, John K

2010-10-01

Bacterial meningitis represents a substantial concern for individuals with cochlear implants (CIs). Chart review and direct patient and family correspondence to ascertain vaccination status. Information dissemination via brochure and electronic media, ongoing reminders of the importance of vaccination when confirmation of vaccination was not received. Marked improvement in vaccination rates ranging from 49% to 99% across different patient populations. Importantly, many patients received their vaccinations only after follow-up reminders. Ensuring optimal vaccination of all CI recipients against high-risk pathogens is a significantly challenging task. Maximizing vaccination rates in CI users will require an ongoing, active effort of information dissemination, documentation of compliance, and well-designed behavioral systems to streamline the pragmatic challenges in vaccination delivery.

Cooling water recipients for nuclear power plants

International Nuclear Information System (INIS)

Dahl, F.-E.; Saetre, H.J.

1971-10-01

The hydrographical and hydrological conditions at 17 prospective nuclear power plant sites in the Oslofjord district are evaluated with respect to their suitability as recipients for thermal discharges from nuclear power plants. No comparative evaluations are made. (JIW)

Recipient screening in IVF: First data from women undergoing anonymous oocyte donation in Dublin

Directory of Open Access Journals (Sweden)

Salma Umme

2011-04-01

Full Text Available Abstract Background Guidelines for safe gamete donation have emphasised donor screening, although none exist specifically for testing oocyte recipients. Pre-treatment assessment of anonymous donor oocyte IVF treatment in Ireland must comply with the European Union Tissues and Cells Directive (Directive 2004/23/EC. To determine the effectiveness of this Directive when applied to anonymous oocyte recipients in IVF, we reviewed data derived from selected screening tests performed in this clinical setting. Methods Data from tests conducted at baseline for all women enrolling as recipients (n = 225 in the anonymous oocyte donor IVF programme at an urban IVF referral centre during a 24-month period were analysed. Patient age at programme entry and clinical pregnancy rate were also tabulated. All recipients had at least one prior negative test for HIV, Hepatitis B/C, chlamydia, gonorrhoea and syphilis performed by her GP or other primary care provider before reproductive endocrinology consultation. Results Mean (±SD age for donor egg IVF recipients was 40.7 ± 4.2 yrs. No baseline positive chlamydia, gonorrhoea or syphilis screening results were identified among recipients for anonymous oocyte donation IVF during the assessment interval. Mean pregnancy rate (per embryo transfer in this group was 50.5%. Conclusion When tests for HIV, Hepatitis B/C, chlamydia, gonorrhoea and syphilis already have been confirmed to be negative before starting the anonymous donor oocyte IVF sequence, additional (repeat testing on the recipient contributes no new clinical information that would influence treatment in this setting. Patient safety does not appear to be enhanced by application of Directive 2004/23/EC to recipients of anonymous donor oocyte IVF treatment. Given the absence of evidence to quantify risk, this practice is difficult to justify when applied to this low-risk population.

Recipient screening in IVF: First data from women undergoing anonymous oocyte donation in Dublin

LENUS (Irish Health Repository)

Walsh, Anthony PH

2011-04-20

Abstract Background Guidelines for safe gamete donation have emphasised donor screening, although none exist specifically for testing oocyte recipients. Pre-treatment assessment of anonymous donor oocyte IVF treatment in Ireland must comply with the European Union Tissues and Cells Directive (Directive 2004\\/23\\/EC). To determine the effectiveness of this Directive when applied to anonymous oocyte recipients in IVF, we reviewed data derived from selected screening tests performed in this clinical setting. Methods Data from tests conducted at baseline for all women enrolling as recipients (n = 225) in the anonymous oocyte donor IVF programme at an urban IVF referral centre during a 24-month period were analysed. Patient age at programme entry and clinical pregnancy rate were also tabulated. All recipients had at least one prior negative test for HIV, Hepatitis B\\/C, chlamydia, gonorrhoea and syphilis performed by her GP or other primary care provider before reproductive endocrinology consultation. Results Mean (±SD) age for donor egg IVF recipients was 40.7 ± 4.2 yrs. No baseline positive chlamydia, gonorrhoea or syphilis screening results were identified among recipients for anonymous oocyte donation IVF during the assessment interval. Mean pregnancy rate (per embryo transfer) in this group was 50.5%. Conclusion When tests for HIV, Hepatitis B\\/C, chlamydia, gonorrhoea and syphilis already have been confirmed to be negative before starting the anonymous donor oocyte IVF sequence, additional (repeat) testing on the recipient contributes no new clinical information that would influence treatment in this setting. Patient safety does not appear to be enhanced by application of Directive 2004\\/23\\/EC to recipients of anonymous donor oocyte IVF treatment. Given the absence of evidence to quantify risk, this practice is difficult to justify when applied to this low-risk population.

Donor-derived stem-cells and epithelial mesenchymal transition in squamous cell carcinoma in transplant recipients.

Science.gov (United States)

Verneuil, Laurence; Leboeuf, Christophe; Bousquet, Guilhem; Brugiere, Charlotte; Elbouchtaoui, Morad; Plassa, Louis-François; Peraldi, Marie-Noelle; Lebbé, Celeste; Ratajczak, Philippe; Janin, Anne

2015-12-08

Skin squamous-cell-carcinoma (SCC), is the main complication in long-term kidney-transplant recipients, and it can include donor-derived cells. Preclinical models demonstrated the involvement of epithelial mesenchymal transition (EMT) in the progression of skin SCC, and the role of Snail, an EMT transcription factor, in cancer stem-cell survival and expansion.Here, we studied stem-cells and EMT expression in SCCs and concomitant actinic keratoses (AK) in kidney-transplant recipients. In SCC and AK in 3 female recipients of male kidney-transplants, donor-derived Y chromosome in epidermal stem cells was assessed using combined XY-FISH/CD133 immunostaining, and digital-droplet-PCR on laser-microdissected CD133 expressing epidermal cells.For EMT study, double immunostainings of CD133 with vimentin or snail and slug, electron microscopy and immunostainings of keratinocytes junctions were performed. Digital droplet PCR was used to check CDH1 (E-cadherin) expression level in laser-microdissected cells co-expressing CD133 and vimentin or snail and slug.The numbers of Y-chromosome were assessed using digital droplet PCR in laser-microdissected cells co-expressing CD133 and vimentin, or snail and slug, and in CD133 positive cells not expressing any EMT maker. We identified donor-derived stem-cells in basal layers and invasive areas in all skin SCCs and in concomitant AKs, but not in surrounding normal skin.The donor-derived stem-cells expressed the EMT markers, vimentin, snail and slug in SCCs but not in AKs. The expression of the EMT transcription factor, SNAI1, was higher in stem-cells when they expressed vimentin. They were located in invasive areas of SCCs. In these areas, the expressions of claudin-1 and desmoglein 1 were reduced or absent, and within the basal layer there were features of basal membrane disappearance.Donor-derived stem cells were in larger numbers in stem cells co-expressing vimentin or snail and slug than in stem cells not expressing any EMT marker

IRS-1 serine phosphorylation and insulin resistance in skeletal muscle from pancreas tranplant recipient

DEFF Research Database (Denmark)

Bouzakri, K; Karlsson, HRK; Vestergaard, Henrik

2006-01-01

Insulin-dependent diabetic recipients of successful pancreas allografts achieve self-regulatory insulin secretion and discontinue exogenous insulin therapy; however, chronic hyperinsulinemia and impaired insulin sensitivity generally develop. To determine whether insulin resistance is accompanied...... by altered signal transduction, skeletal muscle biopsies were obtained from pancreas-kidney transplant recipients (n = 4), nondiabetic kidney transplant recipients (receiving the same immunosuppressive drugs; n = 5), and healthy subjects (n = 6) before and during a euglycemic-hyperinsulinemic clamp. Basal...... insulin receptor substrate (IRS)-1 Ser (312) and Ser (616) phosphorylation, IRS-1-associated phosphatidylinositol 3-kinase activity, and extracellular signal-regulated kinase (ERK)-1/2 phosphorylation were elevated in pancreas-kidney transplant recipients, coincident with fasting hyperinsulinemia. Basal...

IRS-1 serine phosphorylation and insulin resistance in skeletal muscle from pancreas transplant recipients

DEFF Research Database (Denmark)

Bouzakri, Karim; Karlsson, Håkan K R; Vestergaard, Henrik

2006-01-01

Insulin-dependent diabetic recipients of successful pancreas allografts achieve self-regulatory insulin secretion and discontinue exogenous insulin therapy; however, chronic hyperinsulinemia and impaired insulin sensitivity generally develop. To determine whether insulin resistance is accompanied...... by altered signal transduction, skeletal muscle biopsies were obtained from pancreas-kidney transplant recipients (n = 4), nondiabetic kidney transplant recipients (receiving the same immunosuppressive drugs; n = 5), and healthy subjects (n = 6) before and during a euglycemic-hyperinsulinemic clamp. Basal...... insulin receptor substrate (IRS)-1 Ser (312) and Ser (616) phosphorylation, IRS-1-associated phosphatidylinositol 3-kinase activity, and extracellular signal-regulated kinase (ERK)-1/2 phosphorylation were elevated in pancreas-kidney transplant recipients, coincident with fasting hyperinsulinemia. Basal...

Recipient bone marrow-derived stromal cells prolong graft survival in a rat hind limb allotransplantation model.

Science.gov (United States)

Ikeguchi, Ryosuke; Kakinoki, Ryosuke; Ohta, Souichi; Oda, Hiroki; Yurie, Hirofumi; Kaizawa, Yukitoshi; Mitsui, Hiroto; Aoyama, Tomoki; Toguchida, Junya; Matsuda, Shuichi

2017-09-01

Recent studies have indicated that bone marrow-derived stromal cells (BMSCs) have immunomodulatory properties that suppress the T cell responses that cause graft rejection. The purpose of this study is to evaluate the effect of recipient BMSCs intravenous infusion for immunomodulation in a rat vascularized composite allotransplantation model. A total of nine Wistar (WIS) rats and thirty Lewis (LEW) rats were used. BMSCs were harvested from three LEW rats. Twenty-four LEW rats were used as recipients and divided randomly into four groups: BMSC group, FK group, UT group, and Iso group. In the BMSC group, orthotopic rat hind limb transplantation was performed between WIS donor and LEW recipient rats. Recipient rats were injected intravenously with 2 × 10 6 recipient BMSCs on day 6, and with 0.2 mg/kg/day tacrolimus administered over 7 days (n = 6). In the FK group, recipient rats were treated with tacrolimus alone (n = 6). Rats in the UT group received no immunosuppressive treatment (n = 6). In the Iso group, transplantation was performed from three LEW donor rats to six LEW recipient rats without any immunosuppressive treatment (n = 6). Graft survival was assessed by daily inspection and histology. The immunological reactions of recipients were also evaluated. The graft survival of recipient rats in the BMSC group (24.5 days) was significantly prolonged in comparison with that of the FK group (18 days) (P Recipient rats in the BMSC group had significantly reduced serum IFN-γ cytokine levels (1.571 ± 0.779 pg/ml) in comparison with that of the FK group (7.059 ± 1.522 pg/ml) (P = .001). In in vitro study, BMSCs induce T cell hyporesponsiveness in a mixed lymphocyte reaction. BMSCs induce T cell hyporesponsiveness and prolong graft survival in the rat vascularized composite allotransplantation model. BMSCs exhibit immunomodulatory properties against acute rejection that can be realized without the need for significant recipient

Fractures in Kidney Transplant Recipients: A Comparative Study Between England and New York State.

Science.gov (United States)

Arnold, Julia; Mytton, Jemma; Evison, Felicity; Gill, Paramjit S; Cockwell, Paul; Sharif, Adnan; Ferro, Charles J

2017-11-15

Fractures are associated with high morbidity and are a major concern for kidney transplant recipients. No comparative analysis has yet been conducted between countries in the contemporary era to inform future international prevention trials. Data were obtained from the Hospital Episode Statistics and the Statewide Planning and Research Cooperative databases on all adult kidney transplants performed in England and New York State from 2003 to 2013, respectively, and on posttransplant fracture-related hospitalization from 2003 to 2014. Our analysis included 18 493 English and 11 602 New York State kidney transplant recipients. Overall, 637 English recipients (3.4%) and 398 New York State recipients (3.4%) sustained a fracture, giving an unadjusted event rate of 7.0 and 5.9 per 1000 years, respectively (P = .948). Of these, 147 English (0.8%) and 101 New York State recipients (0.9%) sustained a hip fracture, giving an unadjusted event rate of 1.6 and 1.5 per 1000 years, respectively (P = .480). There were no differences in the cumulative incidence of all fractures or hip fractures. One-year mortality rates after any fracture (9% and 11%) or after a hip fracture (15% and 17%) were not different between cohorts. Contemporaneous English and New York State kidney transplant recipients have similar fracture rates and mortality rates postfracture.

The association between religiousness and children's altruism: The role of the recipient's neediness.

Science.gov (United States)

Sabato, Hagit; Kogut, Tehila

2018-03-29

We examined the role of the recipient's neediness as a moderator in the relation between children's household religiosity and prosocial behavior. Examining the behavior of children (2nd and 5th graders) from religious and nonreligious households in the dictator game, we found that the extent of sharing did not differ significantly between the 2 groups when the recipient was not described as needy. However, when the recipient was presented as a poor (needy) child, the religious group exhibited significantly more sharing behavior. Although the religious children's tendency to share more with needy recipients compared with the not-needy ones appeared already in the 2nd grade, it increased with age as children grew and internalized the norms of their immediate society. Among the major religions, the recipient's neediness is an important variable in the decision to give, which shapes religious children's prosocial behavior from an early age. Thus, future research should take this moderator into account when studying the relation between religiousness and prosociality in general and in the development of prosociality in children in particular. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Observation of Blood Donor-Recipient Malaria Parasitaemia Patterns in a Malaria Endemic Region.

Science.gov (United States)

Faruk, Jamilu Abdullahi; Ogunrinde, Gboye Olufemi; Mamman, Aisha Indo

2017-01-01

Asymptomatic malaria parasitaemia has been documented in donor blood in West Africa. However, donated blood is not routinely screened for malaria parasites (MPs). The present study therefore aimed to document the frequency of blood transfusion-induced donor-recipient malaria parasitaemia patterns, in children receiving blood transfusion in a tertiary health-centre. A cross-sectional, observational study involving 140 children receiving blood transfusion was carried out. Blood donor units and patients' blood samples were obtained, for the determination of malaria parasites (MPs). Giemsa staining technique was used to determine the presence of malaria parasitaemia. Malaria parasites were detected in 7% of donor blood and in 8.3% of the recipients' pretransfusion blood. The incidence of posttransfusion MPs was 3%, but none of these were consistent with blood transfusion-induced malaria, as no child with posttransfusion parasitaemia was transfused with parasitized donor blood. Majority of the blood transfusions (89.4%) had no MPs in either donors or recipients, while 6.8% had MPs in both donors and recipients, with the remaining 3.8% showing MPs in recipients alone. In conclusion, the incidence of posttransfusion malaria parasitaemia appears low under the prevailing circumstances.

Stimulation and inhibition of erythropoiesis in donors and hematopoietic effect in irradiated recipient

Energy Technology Data Exchange (ETDEWEB)

Ninkov, V; Piletic, O; Stepanovic, D [Institut za Nuklearne Nauke Boris Kidric, Vinca (Yugoslavia); Belgrade Univ. (Yugoslavia). Inst. of Histology)

1976-03-01

Regeneration dynamics in bone marrow and spleen was studied in rats after irradiation of 800 R and transfusion of bone marrow cells from donors treated in different ways. Priority of the microenvironment of the recipient or of the information obtained in cell donors with respect to further hematopoietic cell differentiation was studied in irradiated recipients. Rats irradiated with 800 R were used as recipients in the experiments. The donors of marrow cells were the rats with stimulated or inhibited erythropoiesis. Stimulation of erythropoiesis was induced by bleeding and experimental polycythemia was provoked by packed erythrocytes. According to our results, it can be concluded that the processes of postirradiation hematopoiesis after transplantation of the bone marrow cells depend on the number and proliferative state of both donors and recipient stem cells, and microenvironment, not excluding the information introduced with the donor cell transplant.

Holey carbon micro-arrays for transmission electron microscopy: A microcontact printing approach

International Nuclear Information System (INIS)

Chester, David W.; Klemic, James F.; Stern, Eric; Sigworth, Fred J.; Klemic, Kathryn G.

2007-01-01

We have used a microcontact printing approach to produce high quality and inexpensive holey carbon micro-arrays. Fabrication involves: (1) micromolding a poly(dimethylsiloxane) (PDMS) elastomer stamp from a microfabricated master that contains the desired array pattern; (2) using the PDMS stamp for microcontact printing a thin sacrificial plastic film that contains an array of holes; (3) floating the plastic film onto TEM grids; (4) evaporating carbon onto the plastic film and (5) removing the sacrificial plastic film. The final holey carbon micro-arrays are ready for use as support films in TEM applications with the fidelity of the original microfabricated pattern. This approach is cost effective as both the master and the stamps have long-term reusability. Arbitrary array patterns can be made with microfabricated masters made through a single-step photolithographic process

Description of recipient areas related to final storage of unreprocessed spent nuclear fuel

International Nuclear Information System (INIS)

Sundblad, B.; Bergstroem, U.

1983-02-01

A comprehensive study of recipient areas in Fjaellveden, Voxnan, Gideaa and Kamlungekoelen is accomplished. Besides general conditions in Finnsjoen and Sternoe are discussed. The recipient areas are defined and their climate, hydrology, bedrock, soil, vegetation, land use and yield from arable land are described as well as the yield of fish for the surface water of interest. The potential exposure pathways and model system at the different areas are defined. Long-term variations of geology, climate, hydrology, land-use, acidification and evolution are described. The possible development of the recipient areas is also discussed. (Authors)

5 CFR 630.1111 - Limitation on the amount of donated annual leave received by an emergency leave recipient.

Science.gov (United States)

2010-01-01

... needs of individual emergency leave recipients, an employing agency may allow an employee to receive... annual leave received by an emergency leave recipient. 630.1111 Section 630.1111 Administrative Personnel... recipient. An emergency leave recipient may receive a maximum of 240 hours of donated annual leave at any...

The Relationship Between Spectral Modulation Detection and Speech Recognition: Adult Versus Pediatric Cochlear Implant Recipients.

Science.gov (United States)

Gifford, René H; Noble, Jack H; Camarata, Stephen M; Sunderhaus, Linsey W; Dwyer, Robert T; Dawant, Benoit M; Dietrich, Mary S; Labadie, Robert F

2018-01-01

Adult cochlear implant (CI) recipients demonstrate a reliable relationship between spectral modulation detection and speech understanding. Prior studies documenting this relationship have focused on postlingually deafened adult CI recipients-leaving an open question regarding the relationship between spectral resolution and speech understanding for adults and children with prelingual onset of deafness. Here, we report CI performance on the measures of speech recognition and spectral modulation detection for 578 CI recipients including 477 postlingual adults, 65 prelingual adults, and 36 prelingual pediatric CI users. The results demonstrated a significant correlation between spectral modulation detection and various measures of speech understanding for 542 adult CI recipients. For 36 pediatric CI recipients, however, there was no significant correlation between spectral modulation detection and speech understanding in quiet or in noise nor was spectral modulation detection significantly correlated with listener age or age at implantation. These findings suggest that pediatric CI recipients might not depend upon spectral resolution for speech understanding in the same manner as adult CI recipients. It is possible that pediatric CI users are making use of different cues, such as those contained within the temporal envelope, to achieve high levels of speech understanding. Further investigation is warranted to investigate the relationship between spectral and temporal resolution and speech recognition to describe the underlying mechanisms driving peripheral auditory processing in pediatric CI users.

34 CFR 611.46 - What are a scholarship recipient's reporting responsibilities upon graduation from the teacher...

Science.gov (United States)

2010-07-01

..., and other identifying information about the recipient; (ii) That he or she is teaching in a high-need... 34 Education 3 2010-07-01 2010-07-01 false What are a scholarship recipient's reporting... scholarship recipient's reporting responsibilities upon graduation from the teacher preparation program? (a...

Donor-derived aspergillosis from use of a solid organ recipient as a multiorgan donor.

Science.gov (United States)

Mueller, N J; Weisser, M; Fehr, T; Wüthrich, R P; Müllhaupt, B; Lehmann, R; Imhof, A; Aubert, J-D; Genoni, M; Kunz, R; Weber, M; Steiger, J

2010-02-01

The growing need for organs and the scarcity of donors has resulted in an increased use of extended criteria donors. We report a case where a recipient of a cardiac graft was used as an organ donor. Death of the recipient occurred 9 days after transplantation and was attributed to presumed cerebral hemorrhage, which post mortem was diagnosed as invasive aspergillosis of the brain. One recipient of a kidney transplant lost the graft due to infection with Aspergillus fumigatus, whereas prompt initiation of therapy successfully prevented disseminated aspergillosis in the other recipients. Despite the pressure to extend the use of organs by lowering the acceptance criteria, organs should only be accepted if the cause of death of the donors is unequivocally explained.

Using the fibre structure of paper to determine authenticity of the documents: analysis of transmitted light images of stamps and banknotes.

Science.gov (United States)

Takalo, Jouni; Timonen, Jussi; Sampo, Jouni; Rantala, Maaria; Siltanen, Samuli; Lassas, Matti

2014-11-01

A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

34 CFR 611.44 - Under what circumstances may the Secretary defer a scholarship recipient's service obligation?

Science.gov (United States)

2010-07-01

... a scholarship recipient's service obligation? (a) Upon written request, the Secretary may defer a service obligation for a scholarship recipient who— (1) Has not begun teaching in a high-need school of a... scholarship recipient's service obligation? 611.44 Section 611.44 Education Regulations of the Offices of the...

Donors and Recipients of Living Kidney Donation: A Qualitative Metasummary of Their Experiences

Directory of Open Access Journals (Sweden)

Deborah Ummel

2011-01-01

Full Text Available With the notable growth in the qualitative investigation of living kidney donation, there is value in aggregating results from this body of research to learn from accumulated experience. The present paper aims to draw a complete portrait of living donors' and recipients' experience of donation by metasummarizing published studies. We found that donors' experience, particularly the decision-making process, has been more extensively studied than the recipients' perspective. Donors differ in their initial level of motivation to donate but on the whole report positive experiences and personal benefits. They also identify difficult periods and the need for additional resources. Recipients report an often positive but more ambivalent reaction to donation. In terms of relational issues between dyads, while the topic remains understudied, the donor-recipient relationship and gift reciprocity have received the most attention. Results are discussed in terms of their implications for future practice and research.

Medal of Honor Recipients: 1979-2004

National Research Council Canada - National Science Library

Richardson, Glenda

2004-01-01

.... Although the Persian Gulf War, Operation Enduring Freedom, and Operation Iraqi Freedom are listed in the Table of Contents, as of this writing, no Medals of Honor have been awarded for actions in these conflicts. For further information, see CRS Report 95-519, "Medal of Honor: History and Issues." This report will be updated as new recipients are named.

Trends in disability benefit recipient rates in post industrialised countries

DEFF Research Database (Denmark)

Rasmussen, Martin

This working paper is part of a study organized by International Social Security Association (ISSA). The study is called Trends in disability benefit recipient rates in post-industrial societies. The other countries participating in the study are Sweden, United States, United Kingdom, The Netherl......This working paper is part of a study organized by International Social Security Association (ISSA). The study is called Trends in disability benefit recipient rates in post-industrial societies. The other countries participating in the study are Sweden, United States, United Kingdom...

Skin autofluorescence reflects individual seasonal UV exposure, skin photodamage and skin cancer development in organ transplant recipients.

Science.gov (United States)

Togsverd-Bo, Katrine; Philipsen, Peter Alshede; Hædersdal, Merete; Wulf, Hans Christian Olsen

2018-01-01

Ultraviolet radiation (UVR)-induced skin cancers varies among organ transplant recipients (OTRs). To improve individual risk assessment of skin cancer, objectively quantified skin photodamage is needed. We measured personal UVR-exposure dose in OTRs and assessed the relation between individual UVR exposure, skin cancer and objectively measured photodamage in terms of skin autofluorescence, pigmentation, and black light-evaluated solar lentigines. Danish OTRs with (n=15) and without a history of skin cancer (n=15) kept sun diaries from May to September and wore personal dosimeters recording time-stamped UVR doses in standard erythema doses (SED). Photodamage was quantified as skin autofluorescence with excitation at 370nm (F370) and 430nm (F430), skin pigmentation (pigment protection factor, PPF), and black light-evaluated solar lentigines. OTRs with skin cancer received a higher UVR dose than OTRs without skin cancer (median 116 SED vs. 67 SED, p=0.07) and UVR exposure doses were correlated with increased PPF (p=0.052) and F370 on the shoulder (F370 shoulder ) (p=0.04). We found that skin cancer was associated with F370 shoulder (OR 10.53, CI 3.3-31,938; p=0.018) and time since transplantation (OR 1.34, CI 0.95-1.91, p=0.097). A cut-off at 7.2 arbitrary units, 89% of OTRs with skin cancer had F370 shoulder values above 7.2 arbitrary units and F370 shoulder was additionally related to patient age (p=0.09) and black light-evaluated solar lentigines (p=0.04). F370 autofluorescence indicates objectively measured photodamage and may be used for individual risk assessment of skin cancer development in OTRs. Copyright © 2017. Published by Elsevier B.V.

Anemia as a complication of parvovirus b19 infection in renal transplant recipients.

Science.gov (United States)

Čapenko, Svetlana; Kozireva, Svetlana; Folkmane, Inese; Bernarde, Kristīna; Rozentāls, Rafails; Murovska, Modra

2012-01-01

The frequency of B19 infection in renal transplant donors and recipients was studied to determine the significance of active viral infection in the development of anemia. Serum, plasma, and peripheral blood leukocyte samples of 47 renal transplant donors, 38 recipients with anemia (Group 1), and 25 without anemia (Group 2) after renal transplantation were evaluated for the presence of anti-B19 specific antibodies (ELISA) and B19 DNA (nPCR). Active persistent B19 infection after renal transplantation was detected in 12 of the 38 in the Group 1 (10 had reactivation and 2 primary infection), and none of the recipients in the Group 2 had it. Of the 12 recipients in the Group 1, 10 were seropositive and 2 seronegative before renal transplantation; 10 received the transplants from the seropositive and 2 from seronegative donors. rHuEPO therapy-resistant severe anemia was detected only in the recipients with active B19 infection after renal transplantation in the Group 1 (7/12). The logistic regression analysis revealed a significant relationship between active B19 infection and severe anemia (OR, 0.039; 95% CI, 0.006-0.257; P=0.001). Active B19 infection was documented only in the anemic recipients and could be associated with the development of severe anemia after renal transplantation. This allows us to recommend concurrent screening for viral DNA in plasma and detection of anti-B19 IgM class antibodies. To find the association between B19 infection and the development of anemia, further investigations are necessary.

Risk for cancer in living kidney donors and recipients.

Science.gov (United States)

Wang, Min; Zhang, Huai; Zhou, Dan; Qiao, Yong-Chao; Pan, Yan-Hong; Wang, Yan-Chao; Zhao, Hai-Lu

2018-03-01

Malignancy following renal transplantation remains inconsistent with the reported safety of kidney donation during the long-term follow-up. We conducted searches of the published literature which included healthy participants, recipients, living kidney donors (LKDs), and the availability of outcome data for malignancy. Eight from 938 potentially relevant studies were analyzed by means of fixed-effects model or random-effects model, as appropriately. In 48,950 participants, the follow-up range was 18 months to 20 years, and the mean age of the subjects was approximately 41 years. The incidence rate with 95% confidence interval (CI) for malignancy after kidney transplantation was 0.03 (0.01-0.05) in recipients and 0.03 (0.1-0.07) in LKDs, giving a pooled incidence rate of 0.03 (95% CI 0.02-0.04). LKDs contrasted nondonors by the overall odds ratio and 95% CI for total cancer of 2.80 (2.69-2.92). Kidney transplantation was associated with an increased risk of cancer during a long-term follow-up. Long-term risk for cancer in LKDs and kidney recipients should be monitored.

Critical care of the hematopoietic stem cell transplant recipient.

Science.gov (United States)

Afessa, Bekele; Azoulay, Elie

2010-01-01

An estimated 50,000 to 60,000 patients undergo hematopoietic stem cell transplantation (HSCT) worldwide annually, of which 15.7% are admitted to the intensive care unit (ICU). The most common reason for ICU admission is respiratory failure and almost all develop single or multiorgan failure. Most HSCT recipients admitted to ICU receive invasive mechanical ventilation (MV). The overall short-term mortality rate of HSCT recipients admitted to ICU is 65%, and 86.4% for those receiving MV. Patient outcome has improved over time. Poor prognostic indicators include advanced age, poor functional status, active disease at transplant, allogeneic transplant, the severity of acute illness, and the development of multiorgan failure. ICU resource limitations often lead to triage decisions for admission. For HSCT recipients, the authors recommend (1) ICU admission for full support during their pre-engraftment period and when there is no evidence of disease recurrence; (2) no ICU admission for patients who refuse it and those who are bedridden with disease recurrence and without treatment options except palliation; (3) a trial ICU admission for patients with unknown status of disease recurrence with available treatment options.

Fibromyalgia and its clinical relevance in renal transplant recipients.

Science.gov (United States)

Erkmen Uyar, M; Sezer, S; Bal, Z; Guliyev, O; Tutal, E; Genctoy, G; Kulah, E; Ozdemir Acar, N; Haberal, M

2015-05-01

Recent evidence suggests that fibromyalgia syndrome (FS) is associated with inflammation and endothelial dysfunction. Our aim was to determine the prevalence of FS in renal transplant recipients and to identify possible links between FS and clinical and laboratory parameters. Ninety-nine kidney transplant recipients with normal graft functions (37.15 ± 10.83 years old, 67 male) were enrolled in the study. All subjects completed the Fibromyalgia Impact Questionnaire (FIQ). The biochemical and clinical parameters in the 1st post-transplantation year were retrospectively recorded. Cardiovascular parameters, including body composition analyses (Tanita), ambulatory blood pressure monitoring data, and pulse-wave velocity, were cross-sectionally analyzed. Mean FIQ score for the whole group was 21.4 ± 14.7. Eight patients had FIQ score >50, and these patients had significantly higher left ventricular mass index than patients with lower FIQ score (P = .048). Patients were divided according to their physical impairment score (PIS): PIS ≥5 (n = 50) and PIS FIQ (7.6% vs 9.4%; P = .0001) than in other patients. FS in renal transplant recipients was strongly associated with hypertension, arterial stiffness, obesity, and renal allograft dysfunction. Copyright © 2015 Elsevier Inc. All rights reserved.

77 FR 54499 - Microorganisms; General Exemptions From Reporting Requirements; Revisions to Recipient Organisms...

Science.gov (United States)

2012-09-05

... within 1 month. Survival was longer for a genetically modified B. amyloliquefaciens strain on leaf... Microorganisms; General Exemptions From Reporting Requirements; Revisions to Recipient Organisms Eligible for... manufacturer must use one of the recipient organisms listed in Sec. 725.420, and must implement specific...

Epigenetic programming of T cells impacts immune reconstitution in hematopoietic stem cell transplant recipients.

Science.gov (United States)

Hardy, Kristine; Smith, Corey; Tu, Wen Juan; McCuaig, Robert; Panikkar, Archana; Dasari, Vijayendra; Wu, Fan; Tey, Siok-Keen; Hill, Geoffrey R; Khanna, Rajiv; Rao, Sudha

2018-03-27

Immune reconstitution following hematopoietic stem cell transplantation (HSCT) is critical in preventing harmful sequelae in recipients with cytomegalovirus (CMV) infection. To understand the molecular mechanisms underlying immune reconstitution kinetics, we profiled the transcriptome-chromatin accessibility landscape of CMV-specific CD8 + T cells from HCST recipients with different immune reconstitution efficiencies. CMV-specific T cells from HSCT recipients with stable antiviral immunity expressed higher levels of interferon/defense response and cell cycle genes in an interconnected network involving PI3KCG , STAT5B , NFAT , RBPJ , and lower HDAC6 , increasing chromatin accessibility at the enhancer regions of immune and T-cell receptor signaling pathway genes. By contrast, the transcriptional and epigenomic signatures of CMV-specific T cells from HSCT recipients with unstable immune reconstitution showed commonalities with T-cell responses in other nonresolving chronic infections. These signatures included higher levels of EGR and KLF factors that, along with lower JARID2 expression, maintained higher accessibility at promoter and CpG-rich regions of genes associated with apoptosis. Furthermore, epigenetic targeting via inhibition of HDAC6 or JARID2 enhanced the transcription of genes associated with differential responses, suggesting that drugs targeting epigenomic modifiers may have therapeutic potential for enhancing immune reconstitution in HSCT recipients. Taken together, these analyses demonstrate that transcription factors and chromatin modulators create different chromatin accessibility landscapes in T cells of HSCT recipients that not only affect immediate gene expression but also differentially prime cells for responses to additional signals. Epigenetic therapy may be a promising strategy to promote immune reconstitution in HSCT recipients. © 2018 by The American Society of Hematology.

Size does matter-donor-to-recipient body mass index difference may affect renal graft outcome.

Science.gov (United States)

Wang, H-H; Lin, K-J; Liu, K-L; Chu, S-H; Hsieh, C-Y; Chiang, Y-J

2012-01-01

Obesity, in the either kidney donor or the recipient, has been related to worse graft function. The aim of this study was to compare long-term graft outcomes of living-related kidney recipients regarding the donor-to-recipient body mass index (BMI) ratio. From November 2002 to November 2010, 62 consecutive living-related kidney transplantations were performed at our center. Donor and recipient BMIs were categorized by Taiwan's national standard using dividing values of 18.5, 24, and 27 kg/m(2) to divide subjects into donor-to-recipient BMI categories. These with the same BMI category as their donors were defined as the same-BMI group (group 0); recipients with a lower BMI category than their donors were defined as the large-to-small group (group 1); and those with a higher BMI category than their donors were defined as the small-to-large group (group 2). Baseline parameters and posttransplantation follow-up data were analyzed according to this grouping. Of the 57 recipients followed regularly at our hospital (mean follow-up 48.9 months), 21 (36.8.1%) were in group 0; 26 (45.6%) in group 1, and 10 (17.6%) in group 2. The baseline parameters were similar among these groups. The overall graft survival rates were 81.0% in group 0, 76.9% in group 1, and 90.0% in group 2. The rejection-free graft survival rates were 81.0%, 65.4%, and 90.0%, respectively. By Kaplan-Meier analysis, group 1 showed worse rejection-free graft survival than group 0 or group 2 (log-rank P = .046). Living-related recipients of kidneys from donors with a higher BMI showed lower long-term graft survival, which might suggest that petite recipients may need time to compensate adequate blood flow for the relative large graft, thus carrying a higher chance of rejection and worse graft outcomes. Copyright © 2012 Elsevier Inc. All rights reserved.

Sensitivity of Billing Claims for Cardiovascular Disease Events among Kidney Transplant Recipients

Science.gov (United States)

Lentine, Krista L.; Schnitzler, Mark A.; Abbott, Kevin C.; Bramesfeld, Kosha; Buchanan, Paula M.; Brennan, Daniel C.

2009-01-01

Background and objectives: Billing claims are increasingly examined beyond administrative functions as outcomes measures in observational research. Few studies have described the performance of billing claims as surrogate measures of clinical events among kidney transplant recipients. Design, setting, participants, & measurements: We investigated the sensitivity of Medicare billing claims for clinically verified cardiovascular diagnoses (five categories) and procedures (four categories) in a novel database linking Medicare claims to electronic medical records of one transplant program. Cardiovascular events identified in medical records for 571 Medicare-insured transplant recipients in 1991 through 2002 served as reference measures. Results: Within a claims-ascertainment period spanning ±30 d of clinically recorded dates, aggregate sensitivity of single claims was higher for case definitions incorporating Medicare Parts A and B for diagnoses and procedures (90.9%) compared with either Part A (82.3%) or Part B (84.6%) alone. Perfect capture of the four procedures was possible within ±30 d or with short claims window expansion, but sensitivity for the diagnoses trended lower with all study algorithms (91.2% with window up to ±90 d). Requirement for additional confirmatory diagnosis claims did not appreciably reduce sensitivity. Sensitivity patterns were similar in the early compared with late periods of the study. Conclusions: Combined use of Medicare Parts A and B billing claims composes a sensitive measure of cardiovascular events after kidney transplant. Further research is needed to define algorithms that maximize specificity as well as sensitivity of claims from Medicare and other insurers as research measures in this population. PMID:19541817

Prevalence, severity and correlates of alcohol use in adult renal transplant recipients.

Science.gov (United States)

Fierz, Katharina; Steiger, Jürg; Denhaerynck, Kris; Dobbels, Fabienne; Bock, Andreas; De Geest, Sabina

2006-01-01

Severe alcohol use is recognized as a major public health concern, even though light to moderate alcohol use might have beneficial effects on health. Alcohol use has been studied to some extent in solid organ transplant populations, yet evidence is lacking on alcohol use and its correlates in the renal transplant population. The aim of this study was therefore to determine the prevalence, severity and correlates of alcohol use in renal transplant recipients. This cross-sectional study is a secondary analysis of the Supporting Medication Adherence in Renal Transplantation (SMART) study. Alcohol use was assessed by patient's self-report. At risk and binge drinkers were classified using World Health Organization criteria. The following correlates of alcohol use were explored: adherence with immunosuppression (Siegal questionnaire; electronic monitoring), smoking, coping style (UCL), depressive symptomatology (BDI) and busyness/routine in life style (ACQ Busyness Scale). Two hundred and eighty-four patients were included in this analysis, 58.1% male, with a mean age of 54 yr (range 20-84) and a median of seven (interquartile ranges [IQR] 8) yr post-transplantation. A total of 52.8% of study participants reported to drink alcohol at least once a week. Two hundred and eighty of 284 subjects (98.5%) were drinking at low risk, four at moderate risk (1.5%). None of the participants were drinking severely. Correlates of alcohol use were male gender and being professionally active. Alcohol use is less prevalent in renal transplant recipients than in the general population. Severe alcohol use does not seem to represent a serious problem in renal transplant patients.

Glucose tolerance, insulin release, and insulin binding to monocytes in kidney transplant recipients

International Nuclear Information System (INIS)

Briggs, W.A.; Wielechowski, K.S.; Mahajan, S.K.; Migdal, S.D.; McDonald, F.D.

1982-01-01

In order to evaluate glucose tolerance following renal transplantation, intravenous glucose tolerance tests (IVGTT), with evaluation of hormonal responses to the intravenous glucose load and percent specific 125 I-insulin binding to peripheral blood monocytes, were studied in eight clinically stable kidney transplant recipients. For comparison purposes, identical studies were done in eight control subjects and seven clinically stable hemodialysis patients. One transplant recipient was glucose intolerant, with fasting hyperglycemia, elevated HbA1C, and abnormal glucose decay constant. Impaired pancreatic insulin release appeared to be the major factor accounting for his glucose intolerance. The seven glucose-tolerant transplant recipients had significantly increased insulin release during IVGTT compared to control subjects, and significant correlations were found among insulin release, glucose decay constant, and fasting blood sugar in those patients. Insulin binding to monocytes was significantly greater in transplant recipients than control subjects due to an increase in insulin binding capacity per cell. A significant correlation was found between percent specific 125 I-insulin binding and steroid dose, expressed as mg/kg body weight/day, in those patients. Thus, chronic steroid administration does not cause glucose intolerance in transplant recipients who manifest steroid-associated increases in pancreatic insulin release and cellular insulin binding capacity

Nonadherence to immunosuppressive therapy in kidney transplant recipients: can technology help?

Science.gov (United States)

Nerini, Erika; Bruno, Fulvio; Citterio, Franco; Schena, Francesco P

2016-10-01

End-stage kidney disease is a life-threatening condition that compels patients to accept either dialysis or transplant. Kidney transplantation is the best choice for patients with end-stage kidney disease because it ensures higher quality of life and longer survival rates than other choices, with less cost for the healthcare system. However, in order for renal recipients to maintain the functioning graft they must take lifelong immunosuppressive medications, with possible side effects and low medication adherence. It is known that low medication adherence in kidney transplant recipients may cause poor outcomes, chronic graft rejection, and graft failure. In this review, the authors give an overview of nonadherence in the transplant setting. In addition, they analyze the role of different technologies as an aid to improve adherence, with a focus on mobile-phone based solutions to monitor and enhance kidney transplant recipient compliance.

SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

Directory of Open Access Journals (Sweden)

Alexandre Reis

2008-01-01

Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

Food insecurity among Dutch food bank recipients: a cross-sectional study.

OpenAIRE

Neter, J.E.; Dijkstra, S.C.; Visser, M.; Brouwer, I.A.

2014-01-01

Objective: To determine the prevalence of (very) low food security among Dutch food bank recipients, and to identify potential demographic, lifestyle and nutrition-related factors associated with (very) low food security. Setting: 11 of 135 Dutch food banks were selected throughout the Netherlands. Participants: 251 Dutch food bank recipients participated in the study (93 men and 158 women). Inclusion criteria for participation were: (1) at least 18 years of age, (2) sufficiently fluent in Du...

Stay Rates of Foreign Doctorate Recipients from U.S. Universities, 2011

Energy Technology Data Exchange (ETDEWEB)

Finn, Michael G. [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States)

2014-01-02

This report provides estimates of stay rates for foreign students who received doctorates in science or engineering (S/E) from U.S. universities. For this paper, the stay rate represents the proportion of foreign doctorate recipients from U.S. universities who stayed in the United States after graduation for any reason and is always specific to a particular year. Each line in the tables that follow describes a different group of these degree recipients.

Matching donor to recipient in liver transplantation: Relevance in clinical practice

OpenAIRE

Reddy, Mettu Srinivas; Varghese, Joy; Venkataraman, Jayanthi; Rela, Mohamed

2013-01-01

Achieving optimum outcomes after liver transplantation requires an understanding of the interaction between donor, graft and recipient factors. Within the cohort of patients waiting for a transplant, better matching of the donor organ to the recipient will improve transplant outcomes and benefit the overall waiting list by minimizing graft failure and need for re-transplantation. A PubMed search was conducted to identify published literature investigating the effects of donor factors such as ...

Netiquette in Electronic Communication

Directory of Open Access Journals (Sweden)

Tomáš Kozík

2014-06-01

Full Text Available Electronic mail and electronic communications systems are considered significant and effective tools of communication. One of the most widespread electronic communication tools is e - mail communication. In order to avoid misinterpretation of the report on the side of the recipient, it is need to pay attention to the writing of e - mail messages as well as to their content. With the continuous expansion of the use of electronic communication there have gradually developed certain rules of etiquette in electronic communications. The existing rules of the propriety ones are expressed in the term " etiqutte " and are not automatically applied in the new communications environment - media. For electronic communication, the new rules of etiquette have been stabilised into a term NETIQUETTE. The word netiquette was created by combining words NET (net and ETIKETA (a set of rules of social behavior and habits. Netiquette constitutes the rules of the behavior of users on a network. Although the netiquette is merely "an unwritten set of rules", their not using can be understood as a type of disrespect. Analysis of knowledge of domestic and foreign sources as well as results of a survey confirmed the justification of paying attention to the education of individuals in NETIQUETTE, irrespective of the degree of education.

42 CFR 121.7 - Identification of organ recipient.

Science.gov (United States)

2010-10-01

... provide to the OPO and to the OPTN the reasons for refusal and shall maintain this document for one year... receipt of an organ, the transplant hospital responsible for the potential recipient's care shall...

Processing of Acoustic Cues in Lexical-Tone Identification by Pediatric Cochlear-Implant Recipients

Science.gov (United States)

Peng, Shu-Chen; Lu, Hui-Ping; Lu, Nelson; Lin, Yung-Song; Deroche, Mickael L. D.; Chatterjee, Monita

2017-01-01

Purpose: The objective was to investigate acoustic cue processing in lexical-tone recognition by pediatric cochlear-implant (CI) recipients who are native Mandarin speakers. Method: Lexical-tone recognition was assessed in pediatric CI recipients and listeners with normal hearing (NH) in 2 tasks. In Task 1, participants identified naturally…

Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

Directory of Open Access Journals (Sweden)

Mu Zhou

2014-01-01

Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

Food insecurity among Dutch food bank recipients: a cross-sectional study.

Science.gov (United States)

Neter, Judith E; Dijkstra, S Coosje; Visser, Marjolein; Brouwer, Ingeborg A

2014-05-16

To determine the prevalence of (very) low food security among Dutch food bank recipients, and to identify potential demographic, lifestyle and nutrition-related factors associated with (very) low food security. 11 of 135 Dutch food banks were selected throughout the Netherlands. 251 Dutch food bank recipients participated in the study (93 men and 158 women). Inclusion criteria for participation were: (1) at least 18 years of age, (2) sufficiently fluent in Dutch to participate in oral and written interviews, (3) recipient of a Dutch food bank for at least 1 month and (4) collect own food parcel at the food bank. A single member per household was included. Level of food security. The prevalence of food insecurity was 72.9% (N=183), of which 40.4% (N=74) reported very low food security. Of the very low food secure participants, 56.8% (N=42) reported they were ever hungry but did not eat because they could not afford enough food in the previous 3 months. Adjusted multinomial logistic regression analyses showed that households without children were less likely to experience low food security (OR 0.39 (95% CI 0.18 to 0.88)) and men (OR 0.24 (95% CI 0.11 to 0.51)) were less likely to experience very low food security, while low-educated recipients (OR 5.05 (95% CI 1.37 to 18.61)) were more likely to experience very low food security. Furthermore, recipients with high satisfaction with overall food intake (OR 0.46 (95% CI 0.27 to 0.78)), high perceived healthiness of overall food intake (OR 0.34 (95% CI 0.19 to 0.62)) or high self-efficacy of eating healthy (OR 0.62 (95% CI 0.40 to 0.96)) were less likely to experience very low food security. Our study showed high prevalence rates of food insecurity among Dutch food bank recipients, and identified subgroups at increased risk of food insecurity. More research is urgently needed on the underlying determinants of food insecurity and the effectiveness of food assistance by food banks. Published by the BMJ Publishing

Recognition of "real-world" musical excerpts by cochlear implant recipients and normal-hearing adults.

Science.gov (United States)

Gfeller, Kate; Olszewski, Carol; Rychener, Marly; Sena, Kimberly; Knutson, John F; Witt, Shelley; Macpherson, Beth

2005-06-01

The purposes of this study were (a) to compare recognition of "real-world" music excerpts by postlingually deafened adults using cochlear implants and normal-hearing adults; (b) to compare the performance of cochlear implant recipients using different devices and processing strategies; and (c) to examine the variability among implant recipients in recognition of musical selections in relation to performance on speech perception tests, performance on cognitive tests, and demographic variables. Seventy-nine cochlear implant users and 30 normal-hearing adults were tested on open-set recognition of systematically selected excerpts from musical recordings heard in real life. The recognition accuracy of the two groups was compared for three musical genre: classical, country, and pop. Recognition accuracy was correlated with speech recognition scores, cognitive measures, and demographic measures, including musical background. Cochlear implant recipients were significantly less accurate in recognition of previously familiar (known before hearing loss) musical excerpts than normal-hearing adults (p genre. Implant recipients were most accurate in the recognition of country items and least accurate in the recognition of classical items. There were no significant differences among implant recipients due to implant type (Nucleus, Clarion, or Ineraid), or programming strategy (SPEAK, CIS, or ACE). For cochlear implant recipients, correlations between melody recognition and other measures were moderate to weak in strength; those with statistically significant correlations included age at time of testing (negatively correlated), performance on selected speech perception tests, and the amount of focused music listening following implantation. Current-day cochlear implants are not effective in transmitting several key structural features (i.e., pitch, harmony, timbral blends) of music essential to open-set recognition of well-known musical selections. Consequently, implant

Peer-to-peer milk donors' and recipients' experiences and perceptions of donor milk banks.

Science.gov (United States)

Gribble, Karleen D

2013-07-01

To explore the intersection of peer-to-peer milk sharing and donor milk banks. A descriptive survey design containing closed and open-ended questions was used to examine women's perceptions of peer-to-peer milk sharing and milk banking. Closed-ended questions were analyzed using descriptive statistics and conventional qualitative content analysis was used to analyze open-ended responses. Participants were recruited via the Facebook sites of two online milk-sharing networks (Human Milk 4 Human Babies and Eats on Feet). Ninety-eight milk donors and 41 milk recipients who had donated or received breast milk in an arrangement that was facilitated via the Internet. One half of donor recipients could not donate to a milk bank because there were no banks local to them or they did not qualify as donors. Other respondents did not donate to a milk bank because they viewed the process as difficult, had philosophical objections to milk banking, or had a philosophical attraction to peer sharing. Most donor respondents felt it was important to know the circumstances of their milk recipients. No recipient respondents had obtained milk from a milk bank; it was recognized that they would not qualify for banked milk or that banked milk was cost prohibitive. Peer-to-peer milk donors and recipients may differ from milk bank donors and recipients in significant ways. Cooperation between milk banks and peer sharing networks could benefit both groups. © 2013 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

The seroprevalence of Parvovirus B19 among kidney transplant recipients: a single-center study.

Science.gov (United States)

Khameneh, Zakieh Rostamzadeh; Sepehrvand, Nariman; Sohrabi, Vahid; Ghasemzadeh, Nazafarin

2014-01-01

Parvovirus B19 is a DNA virus that is responsible for causing several diseases in humans. Parvovirus B19-induced persistent anemia is one of its manifestations that is relatively common in transplant recipients. This study was aimed to investigate the seroprevalence of parvovirus B19 among kidney transplant recipients. Ninety-one transplant recipients were selected randomly and were investigated for several variables including age, gender, educational status, history of hemodialysis (HD), history of blood transfusion and immunosuppressive therapy. Two milliliters of blood samples were collected via venipuncture and evaluated for anti-Parvovirus B19 IgG antibody using enzyme-linked immunosorbent assay. All recipients were anemic, with 72.5% of them suffering from severe anemia (Hb ≤ 11 in men and ≤ 10 in women). Sixty-three patients (69.2%) were seropositive for Parvovirus B19. There was no significant difference in age, sex, educational status, history of blood transfusion, history of HD and immunosuppressive therapy between seropositive and seronegative groups. The seroprevalence of Parvovirus B19 was relatively high in kidney transplant recipients in Urmia, Iran. Our study failed to find a correlation between the severity of anemia and the seropositivity of Parvovirus B19.

Quality of recipient-caregiver relationship and psychological distress are correlates of self-care agency after lung transplantation.

Science.gov (United States)

DeVito Dabbs, Annette; Terhorst, Lauren; Song, Mi-Kyung; Shellmer, Diana A; Aubrecht, Jill; Connolly, Mary; Dew, Mary Amanda

2013-01-01

Self-care behaviors are crucial for following the complex regimen after lung transplantation, yet little is known about recipients' levels of self-care agency (the capability and willingness to engage in self-care behaviors) and its correlates. We examined levels of self-care agency and recipient characteristics (socio-demographics, psychological distress, quality of relationship with primary lay caregiver, and health locus of control) in 111 recipients. Based on Perceived Self-Care Agency scores, recipients were assigned to either the low- or high-self-care agency comparison group. Characteristics were compared between groups to identify characteristics likely to be associated with lower-self-care agency. Mean (SD) score for self-care agency (scale range, 53-265) was 223.02 (22.46). Recipients with lowest-self-care agency scores reported significantly poorer quality of caregiver relationships (p recipient-caregiver relationship remained significantly associated with self-care agency. Every one-point decrease in the quality of caregiver relationship increased the risk of low-self-care agency by 12%. Recipients with poorer caregiver relationships and greater psychological distress may need additional support to perform the self-care behaviors expected after lung transplantation. © 2012 John Wiley & Sons A/S.

Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process

Science.gov (United States)

Ou, Hang; Zhang, Xu; Xu, Junrui; Li, Guangyao; Cui, Junjia

2018-03-01

A novel design and manufacturing method, dubbed "precast," of the cooling system and tools for a hot forming process was proposed in this paper. The integrated structures of the punch and blank holder were determined by analyzing the bending and reverse-bending deformation of the forming parts. The desired crashworthiness performance of an automotive front bumper constructed with this process was obtained by a tailored phase transformation, which generated martensite-bainite in the middle and full martensite transformation in the corner areas. Varying cooling effects in the formed parts caused the highest temperature to be located in the bottom and the lowest on the end of the formed parts. Moreover, the microstructural distributions demonstrated that the bottom possessed a relatively lower content of martensite, while, conversely, the end possessed a higher content. This was precisely the most desired phase distributions for the hot formed parts. For the six-process cycle stamping, the temperatures reached a stable status after an initial rapid increase in the first three process cycles. The microstructural results verified the feasibility of the hot forming tools under multiprocess cycles.

Neurological development of children born to liver transplant recipients.

Science.gov (United States)

Schreiber-Zamora, J; Kociszewska-Najman, B; Borek-Dzięcioł, B; Drozdowska-Szymczak, A; Czaplińska, N; Pawlik, O; Cyganek, A; Pietrzak, B; Wielgoś, M

2014-10-01

Immunosuppressive treatment used in pregnant liver recipients may have a negative impact on fetal development and successively a child. The aim of the study was to make a neurological assessment of infants and children born to liver transplant recipients (LTRs) born between December 4, 2001, and February 11, 2013, in the 1(st) Department of Obstetrics and Gynecology, Medical University of Warsaw. The study involved 88 children, of whom 44 children were born to LTR mothers, and 44 children born to women who were not organ recipients and delivered at a similar gestational age. The gestational age of neonates ranged from 33 to 41 weeks, and the birth weight ranged from 1420 g to 4100 g. The neurological examination was performed in children from 7 weeks to 10 years of age. The neurological development was assessed by a specialist in pediatric neurology. The results of the examination were divided according to the following criteria: 1) normal development, 2) slight disorders, 3) moderate disorders, and 4) severe disorders. The Fisher's exact test was used for statistical analysis. Normal development was found in 35 of 44 (79.54%) children in the LTR group and 39 of 44 (88.63%) children in the control group (P = .3827). Slight disorders were observed in 6 of 44 (13.63%) children in LTR group and 5 of 44 (11.36%) children in the control group. Moderate disorders were found only in 3 of 44 (6.81%) children in the LTR group. No severe disorders were observed in both groups. Neurological development of children born to the liver recipients who were exposed to chronic immunosuppressive treatment in their fetal lives is the same as that of children whose mothers have not undergone organ transplantation.

Interview with Abel Prize Recipient Lennart Carleson

DEFF Research Database (Denmark)

Raussen, Martin; Skau, Christian

2007-01-01

Lennart Carleson is the recipient of the 2006 Abel Prize of the Norwegian Academy of Science and Letters. On May 22, 2006, prior to the Abel Prize celebration i Oslo, Carleson was interviewed by Martin Raussen of Aalborg University and Christian Skau of the Norwegian University of Science...

Travel vaccination recommendations and endemic infection risks in solid organ transplantation recipients.

Science.gov (United States)

Trubiano, Jason A; Johnson, Douglas; Sohail, Asma; Torresi, Joseph

2016-06-01

Solid organ transplant (SOT) recipients are often heavily immunosuppressed and consequently at risk of serious illness from vaccine preventable viral and bacterial infections or with endemic fungal and parasitic infections. We review the literature to provide guidance regarding the timing and appropriateness of vaccination and pathogen avoidance related to the immunological status of SOT recipients. A PUBMED search ([Vaccination OR vaccine] AND/OR ["specific vaccine"] AND/OR [immunology OR immune response OR cytokine OR T lymphocyte] AND transplant was performed. A review of the literature was performed in order to develop recommendations on vaccination for SOT recipients travelling to high-risk destinations. Whilst immunological failure of vaccination in SOT is primarily the result of impaired B-cell responses, the role of T-cells in vaccine failure and success remains unknown. Vaccination should be initiated at least 4 weeks prior to SOT or more than 6 months post-SOT. Avoidance of live vaccination is generally recommended, although some live vaccines may be considered in the specific situations (e.g. yellow fever). The practicing physician requires a detailed understanding of region-specific endemic pathogen risks. We provide a vaccination and endemic pathogen guide for physicians and travel clinics involved in the care of SOT recipients. In addition, recommendations based on timing of anticipated immunological recovery and available evidence regarding vaccine immunogenicity in SOT recipients are provided to help guide pre-travel consultations. © International Society of Travel Medicine, 2016. All rights reserved. Published by Oxford University Press. For permissions, please e-mail: journals.permissions@oup.com.

Antibody induction versus corticosteroid induction for liver transplant recipients

DEFF Research Database (Denmark)

Penninga, Luit; Wettergren, André; Wilson, Colin H

2014-01-01

BACKGROUND: Liver transplantation is an established treatment option for end-stage liver failure. To date, no consensus has been reached on the use of immunosuppressive T-cell specific antibody induction compared with corticosteroid induction of immunosuppression after liver transplantation....... OBJECTIVES: To assess the benefits and harms of T-cell specific antibody induction versus corticosteroid induction for prevention of acute rejection in liver transplant recipients. SEARCH METHODS: We searched The Cochrane Hepato-Biliary Group Controlled Trials Register, the Cochrane Central Register...... to identify additional trials. SELECTION CRITERIA: We included all randomised clinical trials assessing immunosuppression with T-cell specific antibody induction versus corticosteroid induction in liver transplant recipients. Our inclusion criteria stated that participants within each included trial should...

PSYCHOLOGICAL ADAPTATION AND REHABILITATION OF RECIPIENTS OF DONOR ORGANS

Directory of Open Access Journals (Sweden)

S. V. Gautier

2016-01-01

Full Text Available The paper analyzes the nature of psychological adaptation and rehabilitation of patients, recipients of solid organs. The results of the clinical and psychological work with patients, recipients of donor organs, carried out in theSverdlovskRegionalClinicalHospital№ 1 are shown. Special attention has been paid to the study of motivation as the main psychological factor in the process of adaptation and rehabilitation. We have also shown the infl uence of body image and self-evaluation on the emotional state of patients after the operation. Special stress is laid on the significance of psychological factors which improve the quality of the patient’s life. The main principles and the system of psychological rehabilitation are presented. 

High mortality in diabetic recipients of high KDPI deceased donor kidneys.

Science.gov (United States)

Pelletier, Ronald P; Pesavento, Todd E; Rajab, Amer; Henry, Mitchell L

2016-08-01

Deceased donor (DD) kidney quality is determined by calculating the Kidney Donor Profile Index (KDPI). Optimizing high KDPI (≥85%) DD transplant outcome is challenging. This retrospective study was performed to review our high KDPI DD transplant results to identify clinical practices that can improve future outcomes. We retrospectively calculated the KDPI for 895 DD kidney recipients transplanted between 1/2002 and 11/2013. Age, race, body mass index (BMI), retransplantation, gender, diabetes (DM), dialysis time, and preexisting coronary artery disease (CAD) (previous myocardial infarction (MI), coronary artery bypass (CABG), or stenting) were determined for all recipients. About 29.7% (266/895) of transplants were from donors with a KDPI ≥85%. By Cox regression older age, diabetes, female gender, and dialysis time >4 years correlated with shorter patient survival time. Diabetics with CAD who received a high KDPI donor kidney had a significantly increased risk of death (HR 4.33 (CI 1.82-10.30), P=.001) compared to low KDPI kidney recipients. The Kaplan-Meier survival curve for diabetic recipients of high KDPI kidneys was significantly worse if they had preexisting CAD (P<.001 by log-rank test). Patient survival using high KDPI donor kidneys may be improved by avoiding diabetic candidates with preexisting CAD. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An unstable donor-recipient DNA complex in transformation of Bacillus subtilis

International Nuclear Information System (INIS)

Popowski, J.; Venema, G.

1978-01-01

In re-extracted DNA obtained shortly after uptake of transforming DNA by Bacillus subtilis, increased amounts of donor DNA radioactivity banding at the position of donor-recipient DNA complex (DRC) are observed in CsCl gradients, if the cells are irradiated with high doses of UV prior to reextraction of the DNA. Qualitatively, the same phenomenon is observed if lysates of transforming cells are irradiated. UV-irradiation of lysates of competent cells to which single-stranded DNA is added after lysis, does not result in linkage of this DNA to the chromosomal DNA. Two observations argue in favour of the formation of a specific labile complex between donor and resident DNA during transformation. Firstly, heterologous donor DNA from Escherichia coli, although being processed to single-stranded DNA in competent B. subtilis, does not seem to be linked to the recipient chromosome upon UV-irradiation, and secondly, the labile complex of donor and recipient DNA can be stabilized by means of treatment of the lysates of transforming cells with 4, 5 1 , 8-trimethylpsoralen in conjuction with long-wave-ultra violet light irradiation. This indicates that basepairing is involved in the formation of the complex. On the basis of these results we assume that the unstable complex of donor and recipient DNA is an early intermediate in genetic recombination during transformation. (orig.) [de

Temporal stability of music perception and appraisal scores of adult cochlear implant recipients.

Science.gov (United States)

Gfeller, Kate; Jiang, Dingfeng; Oleson, Jacob J; Driscoll, Virginia; Knutson, John F

2010-01-01

An extensive body of literature indicates that cochlear implants (CIs) are effective in supporting speech perception of persons with severe to profound hearing losses who do not benefit to any great extent from conventional hearing aids. Adult CI recipients tend to show significant improvement in speech perception within 3 mo following implantation as a result of mere experience. Furthermore, CI recipients continue to show modest improvement as long as 5yr postimplantation. In contrast, data taken from single testing protocols of music perception and appraisal indicate that CIs are less than ideal in transmitting important structural features of music, such as pitch, melody, and timbre. However, there is presently little information documenting changes in music perception or appraisal over extended time as a result of mere experience. This study examined two basic questions: (1) Do adult CI recipients show significant improvement in perceptual acuity or appraisal of specific music listening tasks when tested in two consecutive years? (2) If there are tasks for which CI recipients show significant improvement with time, are there particular demographic variables that predict those CI recipients most likely to show improvement with extended CI use? A longitudinal cohort study. Implant recipients return annually for visits to the clinic. The study included 209 adult cochlear implant recipients with at least 9 mo implant experience before their first year measurement. Outcomes were measured on the patient's annual visit in two consecutive years. Paired t-tests were used to test for significant improvement from one year to the next. Those variables demonstrating significant improvement were subjected to regression analyses performed to detect the demographic variables useful in predicting said improvement. There were no significant differences in music perception outcomes as a function of type of device or processing strategy used. Only familiar melody recognition (FMR

34 CFR 611.47 - What are a scholarship recipient's reporting responsibilities upon the close of the LEA's...

Science.gov (United States)

2010-07-01

... may require, that confirms that the recipient has taught during this period in a high-need school... 34 Education 3 2010-07-01 2010-07-01 false What are a scholarship recipient's reporting... EDUCATION TEACHER QUALITY ENHANCEMENT GRANTS PROGRAM Scholarships § 611.47 What are a scholarship recipient...

24 CFR 1000.126 - May a recipient charge flat or income-adjusted rents?

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false May a recipient charge flat or income-adjusted rents? 1000.126 Section 1000.126 Housing and Urban Development Regulations Relating to... § 1000.126 May a recipient charge flat or income-adjusted rents? Yes, providing the rental or homebuyer...

Micromechanics-based modeling of stress–strain and fracture behavior of heat-treated boron steels for hot stamping process

Energy Technology Data Exchange (ETDEWEB)

Srithananan, P.; Kaewtatip, P.; Uthaisangsuk, V., E-mail: vitoon.uth@kmutt.ac.th

2016-06-14

In the automotive industry, hot stamped parts with tailored properties have shown advantageous safety performance. Such components are produced by applying different heat treatment conditions after forming for different zones in order to obtain various combinations of hard and soft microstructures. In this work, pure martensitic, pure bainitic, and three martensitic/bainitic phase microstructures were initially generated from the boron steel grade 22MnB5 by a two-step quenching procedure in which different holding times in the bainitic temperature range were varied. Increased phase fraction of bainite due to longer holding time led to decreased yield and tensile strength; however, elongation and resulting energy absorbability became significantly higher. To describe mechanical properties and failure behavior of hot stamped parts containing multiphase microstructures, influences of microstructure characteristics should be considered on the micro-scale. Using modeling, 2-D representative volume elements (RVE) were generated from observed real microstructures and flow curves of the individual single phases were defined, taking into account a dislocation theory based model and local chemical compositions. Then, effective stress–strain curves of the heat-treated boron steels were calculated by using the isostrain and non-isostrain methods and compared with tensile test results. Regarding fracture behavior, damage curves of fully martensitic and bainitic structures were determined by means of tensile tests of different notched samples and a hybrid digital image correlation (DIC)–finite element (FE) approach. 2-D RVE simulations of a martensite/bainite mixture were carried out under various states of stress, in which the obtained damage curves were individually applied for each phase. The predicted damage curve from RVE simulations for two-phase boron steel fairly agreed with experimental fracture strains. Moreover, correspondingly normalized Lode angle could be

Suppression of adoptive antituberculosis immunity by normal recipient animals

International Nuclear Information System (INIS)

Lefford, M.J.

1983-01-01

Adoptive immunity is poorly expressed in normal syngeneic mice. This phenomenon was studied by using experimental antituberculosis immunity as a model system representing pure cell-mediated immunity. Expression of adoptive immunity was facilitated by pretreating recipients with sublethal ionizing radiation (500 rads) or high doses (200 mg/kg) of cyclophosphamide or by using adult thymectomized, lethally irradiated, bone-marrow-reconstituted (TXB) mice. Adult thymectomy was less effective, and a low dose of cyclophosphamide (20 mg/kg) was completely ineffective. The beneficial effect of sublethal irradiation was reduced over time; it persisted for 4 weeks and was absent after 8 weeks. Attempts to restore the suppressed state of normal mice to sublethally irradiated mice by using normal spleen or thymus cells did not succeed. Even in rats, which express adoptive antituberculosis immunity without immunosuppressive treatment, the use of sublethally irradiated or TXB recipients potentiated adoptive immunity. It was concluded that suppression of adoptive immunization in normal recipient mice is mediated predominantly, if not exclusively, by T lymphocytes that are sensitive to a number of immunosuppressive agents. The suppressor cells are long-lived and can be regenerated from precursors that are resistant to 500 but not to 900 rads of ionizing radiation

Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

Energy Technology Data Exchange (ETDEWEB)

Tang, Bingtao, E-mail: tbtsh@hotmail.com [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China); Yuan, Zhengjun; Cheng, Gang [School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101 (China); Huang, Lili; Zheng, Wei [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); Xie, Hui [State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China)

2013-11-15

Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well.

Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

International Nuclear Information System (INIS)

Tang, Bingtao; Yuan, Zhengjun; Cheng, Gang; Huang, Lili; Zheng, Wei; Xie, Hui

2013-01-01

Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well

Transmission of Angiosarcomas From a Common Multiorgan Donor to Four Transplant Recipients

DEFF Research Database (Denmark)

Thoning, J; Liu, Ying; Bistrup, C

2013-01-01

We describe the donor tumor transmission of metastatic angiosarcomas to four transplant recipients through transplantation of deceased-donor organs, i.e. kidneys, lung and liver, from an apparently unaffected common female multiorgan donor. Fluorescent in situ hybridization of angiosarcoma cells...... confirmed that the tumor was of female donor's origin in male kidney recipients. Recent literature associated increased urokinase-plasminogen-activator-receptor (uPAR) and plasma soluble urokinase-plasminogen-activator-receptor (suPAR) levels with metastatic malignancies. Now we found that, compared...... to baseline levels, both deceased-donor kidney recipients showed increased uPAR transcripts in mononuclear cells as well as increased plasma suPAR levels after the diagnosis of metastatic angiosarcomas, i.e. 4 months after donor tumor transmission. These results show an association of uPAR/suPAR in donor...

Investigation of association between donors' and recipients' NADPH oxidase p22(phox) C242T polymorphism and acute rejection, delayed graft function and blood pressure in renal allograft recipients.

Science.gov (United States)

Mandegary, Ali; Rahmanian-Koshkaki, Sara; Mohammadifar, Mohammad-Amir; Pourgholi, Leila; Mehdipour, Mohammad; Etminan, Abbas; Ebadzadeh, Mohammad-Reza; Fazeli, Faramarz; Azmandian, Jalal

2015-01-01

Production of reactive oxygen species (ROS) and thereby induction of oxidative stress seem to be one of the major mediators of inflammatory adverse outcomes after renal transplantation. p22(phox) is a polymorphic subunit of NAD(P)H-oxidase that is critical for activation and stabilization of the enzyme. This enzyme is involved in the production of superoxide that triggers inflammatory injuries to the kidney. So in this study, the association between donors and recipients' C242T polymorphism of p22(phox) and acute rejection (AR), delayed graft function (DGF), creatinine clearance (CrCl), and blood pressure in renal-allograft recipients was studied. One hundred ninety six donor-recipient pairs were studied. The C242T polymorphism of p22(phox) was determined using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). According to p22 genotype, the subjects were divided in wild-type (CC) and T allele carriers (CT+TT). Transplantation outcomes were determined using acute rejection and delayed graft function criteria. The mean arterial pressure was also measured monthly after transplantation. There was a significant association between the recipients' p22(phox) polymorphism and DGF occurrence (OR=2.5, CI: 1.2-4.9, p=0.0009). No significant association was detected between donors' p22(phox) polymorphism and AR and DGF events. CrCl during the six months follow-up after transplantation was lower in the patients who received allograft from donors carrying 242T allele (B=-12.8, CI: -22.9-12.8 (-22.9 to -2.6)). Changes in the blood pressure were not different among the patients having different genotypes of p22(phox). These results suggest that the recipients' p22(phox) C242T polymorphism may be a major risk factor for DGF in renal transplantation. Moreover, the donors' 242T allele seems to affect the rate of CrCl in the renal allograft recipients. Copyright © 2014. Published by Elsevier B.V.

Quality of sleep and health-related quality of life in renal transplant recipients.

Science.gov (United States)

Liu, Hong-Xia; Lin, Jun; Lin, Xiao-Hong; Wallace, Linda; Teng, Sha; Zhang, Shu-Ping; Hao, Yu-Fang

2015-01-01

The purpose of this study was to examine the sleep quality and health-related quality of life (HRQOL) in patients after renal transplantation and to explore the relationship between the quality of sleep and the HRQOL. Sleep disorders are still an important clinical problem after renal transplantation. Previous studies mainly focused on patients' sleep quality before kidney transplant. More studies are needed to document sleep quality after renal transplantation. A cross-sectional design was used in this study. A convenience sample of renal transplant recipients was recruited at an outpatient transplant clinic of a general hospital in Beijing, China. The Pittsburgh Sleep Quality Index (PSQI) was used to measure quality of sleep. The Medical Outcomes Study 36-item Short Form (MOS SF-36) was used to measure health-related quality of life. The average PSQI score of the 204 renal transplant recipients was 5.81±3.52, significantly lower than the norm. Fifty (24.5%) recipients were classified as having poor sleep quality (global PSQI > 7). The mean scores of renal transplant recipients for SF-36 Mental Component Summary (MCS) and Physical Component Summary (PCS) were 47.57±6.71 and 48.26±9.66 respectively. Compared with residents in Sichuan province, recipients' scores for SF-36 dimensions were statistically lower except the dimension of mental health. SF-36 scores of poor sleepers (PSQI > 7) were significantly lower than the good sleepers (PSQI ≤ 7) in both the MCS and PCS. Significant differences exist between the groups in physical function, bodily pain, vitality, and mental health dimensions. Sleep quality and HRQOL of patients after renal transplantation were lower than the norm. Poor sleep is associated with lower HRQOL. Health professionals need to pay attention to sleep quality and HRQOL in renal transplant recipients and take appropriate measures to improve patients' sleep quality and HRQOL.

Recipient Related Prognostic Factors for Graft Survival after Kidney Transplantation. A Single Center Experience

Directory of Open Access Journals (Sweden)

Alina Daciana ELEC

2012-09-01

Full Text Available Background and Aim. Advanced chronic kidney disease (CKD severely impairs life expectancy and quality of life in affected patients. Considering its benefits, renal transplantation currently represents the optimal treatment solution for end stage kidney disease patients. Pre-transplant assessment aims to maximize the graft and patient survival by identifying potential factors influencing the post-transplant outcome. The aim of this study has been to analyze recipient related prognostic factors bearing an impact on graft survival. Material and Methods. We analyzed the graft outcomes of 426 renal transplantations performed at the Clinical Institute of Urology and Renal Transplantation of Cluj-Napoca, between January 2004 and December 2008. Variables related to recipient and to potential donor/recipient prognostic factors were studied using univariate and multivariate analysis. Results. Graft survivals at 1, 3, 5 and 7 years were 94.01%, 88.37%, 82.51% and 78.10%, respectively. Chronic rejection (41.11% and death with a functioning graft (18.88% were the main causes of graft loss. In uni and multivariate analysis the recipient related variables found to influence the renal graft outcome were: peritoneal dialysis, pre transplant residual diuresis, grade I hypertension, severe iliac vessel atheromatosis, ischemic heart disease, stroke history, dyslipidemia and denutrition. The worst graft outcomes have been found for recipients on peritoneal dialysis, with anuria, hypotension, severe iliac atheromatosis, ischemic heart disease, stroke history, dyslipidemia and a poor nutritional status. Conclusion. The type of dialysis, the pre transplant residual diuresis, recipient arterial blood pressure, iliac vessel atheromatosis, ischemic heart disease, stroke history, dyslipidemia and denutrition significantly influence graft survival.

Dengue virus infection in renal allograft recipients: a case series during 2010 outbreak.

Science.gov (United States)

Prasad, N; Bhadauria, D; Sharma, R K; Gupta, A; Kaul, A; Srivastava, A

2012-04-01

Dengue virus infection is an emerging global threat caused by Arbovirus, a virus from Flaviridiae family, which is transmitted by mosquitoes, Aedes aegypti and Aedes albopictus. Renal transplant recipients who live in the endemic zones of dengue infection or who travel to an endemic zone could be at risk of this infection. Despite multiple epidemics and a high case fatality rate in the Southeast Asian region, only a few cases of dengue infection in renal transplant recipients have been reported. Here, we report a case series of 8 dengue viral infection in renal transplant recipients. Of the 8 patients, 3 developed dengue hemorrhagic shock syndrome and died. © 2011 John Wiley & Sons A/S.

Stretchable electronics for wearable and high-current applications

Science.gov (United States)

Hilbich, Daniel; Shannon, Lesley; Gray, Bonnie L.

2016-04-01

Advances in the development of novel materials and fabrication processes are resulting in an increased number of flexible and stretchable electronics applications. This evolving technology enables new devices that are not readily fabricated using traditional silicon processes, and has the potential to transform many industries, including personalized healthcare, consumer electronics, and communication. Fabrication of stretchable devices is typically achieved through the use of stretchable polymer-based conductors, or more rigid conductors, such as metals, with patterned geometries that can accommodate stretching. Although the application space for stretchable electronics is extensive, the practicality of these devices can be severely limited by power consumption and cost. Moreover, strict process flows can impede innovation that would otherwise enable new applications. In an effort to overcome these impediments, we present two modified approaches and applications based on a newly developed process for stretchable and flexible electronics fabrication. This includes the development of a metallization pattern stamping process allowing for 1) stretchable interconnects to be directly integrated with stretchable/wearable fabrics, and 2) a process variation enabling aligned multi-layer devices with integrated ferromagnetic nanocomposite polymer components enabling a fully-flexible electromagnetic microactuator for large-magnitude magnetic field generation. The wearable interconnects are measured, showing high conductivity, and can accommodate over 20% strain before experiencing conductive failure. The electromagnetic actuators have been fabricated and initial measurements show well-aligned, highly conductive, isolated metal layers. These two applications demonstrate the versatility of the newly developed process and suggest potential for its furthered use in stretchable electronics and MEMS applications.

The sural artery and vein as recipient vessels in free flap reconstruction about the knee.

Science.gov (United States)

Johnson, P E; Harris, G D; Nagle, D J; Lewis, V L

1987-04-01

The sural artery and vein were used successfully as recipient vessels in nine patients who required free flap reconstruction about the knee. The anatomy of the sural vessels and the potential advantages of their use as free flap recipients are reviewed and discussed. Indications include popliteal vessels that are absent or severely damaged, as determined by preoperative angiography. No anastomotic complications were encountered in this series, indicating that the sural artery and vein can be used successfully as recipient vessels.

The effect of amount and tangibility of endowment and certainty of recipients on selfishness in a modified dictator game.

Science.gov (United States)

Chang, Shao-Chuan; Lin, Li-Yun; Horng, Ruey-Yun; Wang, Yau-De

2014-06-01

Taiwanese college students (N = 101) participated in the study to examine the effects of the amount of an endowment, the tangibility of an endowment, and the certainty of the recipient on selfishness in a modified dictator game. Results showed that dictators were more selfish when allocating tangible (money) than less tangible (honor credits) endowments. Selfishness was higher when large amounts of money were involved. The certainty of the recipient was manipulated by whether the recipient was chosen and announced before or after the decision. Unexpectedly, participants were more self-interested in the certain-recipient condition than in the uncertain-recipient condition. In the honor condition, the amount of an endowment and the certainty of the recipient did not affect participants' allocations.

The seroprevalence of parvovirus B19 among kidney transplant recipients: A single-center study

Directory of Open Access Journals (Sweden)

Zakieh Rostamzadeh Khameneh

2014-01-01

Full Text Available Parvovirus B19 is a DNA virus that is responsible for causing several diseases in humans. Parvovirus B19-induced persistent anemia is one of its manifestations that is relatively common in transplant recipients. This study was aimed to investigate the seroprevalence of parvovirus B19 among kidney transplant recipients. Ninety-one transplant recipients were selected randomly and were investigated for several variables including age, gender, educational status, history of hemodialysis (HD, history of blood transfusion and immunosuppressive therapy. Two milliliters of blood samples were collected via venipuncture and evaluated for anti-Parvovirus B19 IgG antibody using enzyme-linked immunosorbent assay. All recipients were anemic, with 72.5% of them suffering from severe anemia (Hb ≤ 11 in men and ≤ 10 in women. Sixty-three patients (69.2% were seropositive for Parvovirus B19. There was no significant difference in age, sex, educational status, history of blood transfusion, history of HD and immunosuppressive therapy between seropositive and seronegative groups. The seroprevalence of Parvovirus B19 was relatively high in kidney transplant recipients in Urmia, Iran. Our study failed to find a correlation between the severity of anemia and the seropositivity of Parvovirus B19.

Effect of embryo age and recipient asynchrony on pregnancy rates in a commercial equine embryo transfer program.

Science.gov (United States)

Jacob, J C F; Haag, K T; Santos, G O; Oliveira, J P; Gastal, M O; Gastal, E L

2012-04-01

In the present study, 809 uterine flushes and 454 embryo transfers performed in mares over a 4-yr interval were examined to evaluate the effects of: (1) the day of embryo collection on recovery rates; (2) the degree of synchrony between donor and recipient mares on pregnancy rates; (3) the recipient day post ovulation on pregnancy rates; and (4) the age of the embryo at recovery on pregnancy rates at 60 days. Uterine flushes were performed on Days 6, 7, 8, 9, and 10 (Day 0 = ovulation) and embryos were transferred to recipients with degrees of synchrony varying between +1 to -6 (recipient ovulated 1 day before through 6 days after the donor). Recipient mares ranged from 2 to 8 days post ovulation. Embryo recovery rates were similar for flushes performed on Day 7 (61%), Day 8 (66%), Day 9 (59%), and Day 10 (56%), but the embryo recovery rate was lower (P recipient mares on Day 2 (33%) compared with mares on Day 3 (66%), Day 4 (66%), Day 5 (62%), Day 6 (55%), Day 7 (58%), and Day 8 (56%). Pregnancy rate was higher (P recipient mares does not need to be as restricted as previously reported in horses. Acceptable pregnancy rates (e.g., 70%, 99/142) were obtained even when recipient mares ovulated 4 to 5 days after the donors; (3) similar pregnancy rates were obtained when recipient mares received embryos within a large range of days post ovulation (Days 3 to 8); and (4) Day 7 embryos produced higher pregnancy rates when compared with Days 8 and 9 embryos. In clinical terms, the application of these new findings will be beneficial to large equine embryo transfer operations in producing more pregnancies per season. Copyright © 2012 Elsevier Inc. All rights reserved.

Reactivation of Hepatitis B Virus in Hematopoietic Stem Cell Transplant Recipients in Japan: Efficacy of Nucleos(tide Analogues for Prevention and Treatment

Directory of Open Access Journals (Sweden)

Shingo Nakamoto

2014-11-01

Full Text Available We retrospectively reviewed 413 recipients with hematologic malignancies who underwent hematopoietic stem cell transplantation (HSCT between June 1986 and March 2013. Recipients with antibody to hepatitis B core antigen (anti-HBc and/or to hepatitis B surface antigen (anti-HBs were regarded as experiencing previous hepatitis B virus (HBV infection. Clinical data of these recipients were reviewed from medical records. We defined ≥1 log IU/mL increase in serum HBV DNA from nadir as HBV reactivation in hepatitis B surface antigen (HBsAg-positive recipients, and also defined ≥1 log IU/mL increase or re-appearance of HBV DNA and/or HBsAg as HBV reactivation in HBsAg-negative recipients. In 5 HBsAg-positive recipients, 2 recipients initially not administered with nucleos(tide analogues (NUCs experienced HBV reactivation, but finally all 5 were successfully controlled with NUCs. HBV reactivation was observed in 11 (2.7% of 408 HBsAg-negative recipients; 8 of these were treated with NUCs, and fortunately none developed acute liver failure. In 5 (6.0% of 83 anti-HBc and/or anti-HBs-positive recipients, HBV reactivation occurred. None of 157 (0% recipients without HBsAg, anti-HBs or anti-HBc experienced HBV reactivation. In HSCT recipients, HBV reactivation is a common event in HBsAg-positive recipients, or in HBsAg-negative recipients with anti-HBc and/or anti-HBs. Further attention should be paid to HSCT recipients with previous exposure to HBV.

Serum vitamin D levels in kidney transplant recipients: the importance of an immunosuppression regimen and sun exposure.

Science.gov (United States)

Eyal, Ophir; Aharon, Michal; Safadi, Rifaat; Elhalel, Michal Dranitzki

2013-10-01

Vitamin D deficiency was shown to be prevalent among renal transplant recipients in northern countries, but little is known regarding risk factors. To test vitamin D levels in kidney transplant recipients residing closer to the equator, compare them to levels in liver transplant recipients and hemodialysis patients, and identify possible risk factors. In a cross-sectional study 103 kidney transplant recipients, 27 liver transplant recipients and 50 hemodialysis patients followed at our institute were tested for vitamin D levels. Demographic data, medical history and current treatment were recorded from the medical files. Inadequate vitamin D levels (Vitamin D levels were higher among dialysis patients than transplant recipients, though deficiency rates were similar. No association was found between kidney function and vitamin deficiency. Deficiency was associated with higher prednisone doses, use of mycophenolate sodium, tacrolimus, and iron supplements, or lower doses of vitamin D supplementation. Despite potential higher ultraviolet B exposure, inadequate vitamin D levels were prevalent in our study group. Importantly, some immunosuppressive medications were associated with vitamin D deficiency and high doses of vitamin D were associated with less deficiency.

Electro-optic sampling at 90 degree interaction geometry for time-of-arrival stamping of ultrafast relativistic electron diffraction

Directory of Open Access Journals (Sweden)

C. M. Scoby

2010-02-01

Full Text Available In this paper we study a new geometry setup for electro-optic sampling (EOS where the electron beam runs parallel to the ⟨110⟩ face of a ZnTe crystal and the probe laser is perpendicular to it and to the beam path. The simple setup is used to encode the time-of-arrival information of a 3.5  MeV<10  pC electron bunch on the spatial profile of the laser pulse. The electric field lines inside the dielectric bend at an angle due to a relatively large (n∼3 index of refraction of the ZnTe crystal. We found theoretically and experimentally that the EOS signal can be maximized with a proper choice of incoming laser polarization angle. We achieved single-shot nondestructive measurement of the relative time of arrival between the pump and the probe beams thus improving the temporal resolution of ultrafast relativistic electron diffraction experiments.

Overcoming the Obstacles of the Ilizarov Device in Extremity Reconstruction: Usefulness of the Perforator as the Recipient Vessel.

Science.gov (United States)

Kim, Kyu Nam; Hong, Joon Pio; Park, Sung Woo; Kim, Sang Woo; Yoon, Chi Sun

2015-07-01

When patients using the Ilizarov device need a free-flap procedure for their thigh and leg, it is difficult to isolate the major vessels as the recipient vessel due to the limited working space around the Ilizarov rings and pins. The usefulness of a perforator as the recipient vessel to allow minimally invasive surgery was investigated in this study. Between October 2011 and December 2013, 77 patients using the Ilizarov device needed free flap reconstruction using an anterolateral thigh perforator flap or superficial circumflex iliac artery perforator flap. The perforator was used as a recipient vessel in 50 cases, with which end-to-end anastomosis was performed using a perforator-to-perforator approach, and major vessels were used as a recipient vessel in 27 cases (n = 20, anterior tibial vessel; n = 7, posterior vessel). When the perforator was used as the recipient vessel, total loss developed in one case and marginal necrosis in four cases. When the major vessel was used as the recipient vessel, whole necrosis developed in one case and marginal necrosis in two cases. The procedure increased the freedom of hand movement, decreased the recipient vessel dissection time, and reduced the recipient dissection scar. The use of perforators as recipients overcomes the obstacles associated with the Ilizarov device and allows convenient and rapid reconstruction, with similar success as microsurgery using major vessels. Further studies are needed to address the limitations of this approach, which include perfusion physiology and the viable limit of the flap dimension. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Registered nurse intent to promote physical activity for hospitalised liver transplant recipients.

Science.gov (United States)

Pearson, Jocelyn A; Mangold, Kara; Kosiorek, Heidi E; Montez, Morgan; Smith, Diane M; Tyler, Brenda J

2017-12-26

To describe how registered nurse work motivation, attitudes, subjective norm and perceived behavioural control influence intention to promote physical activity in hospitalised adult liver transplant recipients. Descriptive study of clinical registered nurses caring for recipients of liver transplant at a tertiary medical centre. Intent to Mobilise Liver Transplant Recipient Scale, Work Extrinsic and Intrinsic Motivation Scale, and demographics were used to explore registered nurses' work motivation, attitudes, subjective norms, perceived behavioural control and intention to promote physical activity of hospitalised adult liver transplant recipients during the acute postoperative phase. Data analysis included demographics, comparison between scale items and analysis of factors predicting intent to mobilise. Factors predictive of intention to promote physical activity after liver transplant included appropriate knowledge to mobilise patients (R 2  = .40) and identification of physical activity as nursing staff priority (R 2  = .15) and responsibility (R 2  = .03). When implementing an early mobilisation protocol after the liver transplant, education on effects of physical activity in the immediate postoperative period are essential to promote implementation in practice. Nursing care environment and leadership must be supportive to ensure mobility is a registered nurse priority and responsibility. Nursing managers can leverage results to implement a mobility protocol. © 2017 John Wiley & Sons Ltd.

Zonulin, iron status, and anemia in kidney transplant recipients: are they related?

Science.gov (United States)

Malyszko, Jolanta; Koc-Zorawska, E; Levin-Iaina, N; Malyszko, Jacek

2014-10-01

In patients after kidney transplantation, anemia is relatively common and is associated with impaired kidney function, subclinical inflammatory state, and immunosuppressive treatment. Zonulin-prehaptoglobin-2, a newly discovered protein, is necessary for integrity of intracellular tight junctions in the gut. Taking into consideration iron metabolism, including its absorption in the gut, we designed a cross-sectional study to look for the possible interactions among zonulin, iron status, and anemia in kidney transplant recipients. The study was performed on 72 stable kidney transplant recipients and 22 healthy volunteers. Zonulin, iron status, and inflammatory markers were assessed with the use of commercially available kits. Zonulin was significantly lower in kidney allograft recipients than in healthy volunteers (P Zonulin correlated with systolic blood pressure (r = -0.33; P Zonulin was not affected by sex, type of immunosuppressive therapy, presence of diabetes, coronary artery disease, heart failure, hypertension, or cause of end-stage renal disease. Zonulin was not related to any of the iron parameters studied. In multiple regression analysis, predictors of zonulin were total protein and thyroglobulin-binding protein, explaining 46% of variation. Zonulin, with its poorly defined function, does not seem to play a role in the anemia in kidney allograft recipients; however, it seems to be related to the absorption process in the gut.

Kidney recipients experiences before during and after kidney transplantation

DEFF Research Database (Denmark)

Nielsen, Charlotte

Background Kidney transplantation is considered to be the best treatment for terminal renal insufficiency. Kidney transplant patients report higher quality of life because they avoid regular dialysis treatment that causes side effects, complications, restrictions and limitations in their daily...... and after the kidney transplant, through outpatient visits and during possible hospitalization, which can occur due to complications or disease progression. Objective To explore the coherence of the kidney transplant process in order to explain the lived experiences of kidney recipients before, during...... and after kidney transplantation. Method Participant observation and semi-structured individual interviews was conducted with kidney recipients before, during and after kidney transplantation. Data analysis is inspired by Ricoeur's interpretation theory on three levels: Naive reading; structural analysis...

Effect of donor ethnicity on kidney survival in different recipient pairs: an analysis of the OPTN/UNOS database.

Science.gov (United States)

Callender, C O; Cherikh, W S; Traverso, P; Hernandez, A; Oyetunji, T; Chang, D

2009-12-01

Previous multivariate analysis performed between April 1, 1994, and December 31, 2000 from the Organ Procurement Transplant Network/United Network for Organ Sharing (OPTN/UNOS) database has shown that kidneys from black donors were associated with lower graft survival. We compared graft and patient survival of different kidney donor-to-recipient ethnic combinations to see if this result still holds on a recent cohort of US kidney transplants. We included 72,495 recipients of deceased and living donor kidney alone transplants from 2001 to 2005. A multivariate Cox regression method was used to analyze the effect of donor-recipient ethnicity on graft and patient survival within 5 years of transplant, and to adjust for the effect of other donor, recipient, and transplant characteristics. Results are presented as hazard ratios (HR) with the 95% confidence limit (CL) and P values. Adjusted HRs of donor-recipient patient survival were: white to white (1); and white to black (1.22; P = .001). Graft survival HRs were black to black (1.40; P recipients. The graft and patient survival rates for Asian and Latino/Hispanic recipients, however, were not affected by donor ethnicity. This analysis underscores the need for research to better understand the reasons for these disparities and how to improve the posttransplant graft survival rates of black kidney recipients.

34 CFR 611.42 - How does the Secretary calculate the period of the scholarship recipient's service obligation?

Science.gov (United States)

2010-07-01

... scholarship recipient must teach in a high-need school of a high-need LEA in order to fulfill his or her... and 611.47 on the period the recipient has taught in one of its high-need schools; and (ii) Adjusting the period in which the recipient has taught in a high-need school to reflect the individual's...

Ramadan Fasting in Kidney Transplant Recipients: A Single-Centre Retrospective Study

Directory of Open Access Journals (Sweden)

Ihab A. Ibrahim

2018-01-01

Full Text Available Background. Fasting during the lunar month of Ramadan is mandatory to all healthy adult Muslims. Renal transplant recipients are often worried about the impact of fluid and electrolyte deprivation during fasting on the function of their allograft. We aimed to examine the effect of fasting Ramadan on the graft function in renal transplant recipients. Methods. This retrospective cohort study included patients who underwent kidney transplantation in our tertiary referral center. Baseline pre-Ramadan estimated glomerular filtration rate (eGFR, mean arterial pressure (MAP, and urinary protein excretion were compared to those during and after Ramadan within and between the fasting and non-fasting groups. Results. The study population included 280 kidney transplant recipients who chose to fast during the Ramadan month (June-July 2014 and 285 recipients who did not fast. In the fasting group, baseline eGFR did not change from that during or post-Ramadan (72.6±23.7 versus 72.3±24.5 mL/min/1.73 m2, P=0.53; and 72.6±23.7 versus 72±23.2 mL/min/1.73 m2, P=0.14, respectively. Compared to baseline, there were no significant differences between the fasting and the non-fasting groups in terms of mean percent changes in eGFR, MAP, and urinary protein excretion. Conclusion. Fasting during the month of Ramadan did not have significant adverse effects on renal allograft function.

Trichoderma viride infection in a liver transplant recipient

NARCIS (Netherlands)

Jacobs, F.; Byl, B.; Bourgeois, N.; Coremans-Pelseneer, J.; Florquin, S.; Depré, G.; van de Stadt, J.; Adler, M.; Gelin, M.; Thys, J. P.

1992-01-01

A liver transplant recipient developed infection of a perihepatic haematoma due to Trichoderma viride. Before the infection was diagnosed, the patient received intense immuno-suppressive and prolonged antibacterial and anti-fungal therapies. Although the death of the patient was not directly related

Colchicine-induced myoneuropathy in a cyclosporine-treated renal transplant recipient

Directory of Open Access Journals (Sweden)

Kyungmin Huh

2013-06-01

Full Text Available Colchicine is a relatively safe medication that is widely used for both prevention and treatment of gout attack. However, serious adverse events, including myoneuropathy and multiorgan failure, have been reported. We report a case of colchicine-induced myoneuropathy in a female kidney transplant recipient who had been taking cyclosporine. She developed gastrointestinal discomfort and paresthesia 5 days after the initiation of colchicine. She showed signs of myoneuropathy, and hepatic and renal injury. Colchicine toxicity was suspected, and colchicine was discontinued. Her symptoms and laboratory findings improved gradually. Literature was reviewed for previous reports of colchicine-induced myoneuropathy in solid organ transplant recipients.

Cancer-Specific and All-Cause Mortality in Kidney Transplant Recipients With and Without Previous Cancer.

Science.gov (United States)

Viecelli, Andrea K; Lim, Wai H; Macaskill, Petra; Chapman, Jeremy R; Craig, Jonathan C; Clayton, Philip; Cohney, Solomon; Carroll, Robert; Wong, Germaine

2015-12-01

For dialysis patients with a cancer history, a period of surveillance is generally recommended before listing for transplantation. However, the outcomes of patients with cancer recurrence and/or a second primary cancer after transplantation are unknown. To determine the prognosis of kidney transplant recipients who developed cancer after transplantation and whether this varied with cancer types (first cancer, recurrence, second primary cancer). Using data from the Australian and New Zealand Dialysis and Transplant Registry, we compared the cancer-specific and all-cause mortality among recipients with different cancer types using adjusted Cox proportional hazard models. Of the 21,415 recipients transplanted between 1965 and 2012, 3% (651 of 21,415) had a previous cancer history. A total of 2840 (13%) recipients developed cancer after the first transplant, of whom 2760 (97.2%) developed a first cancer, 23 (0.8%) experienced cancer recurrence, and 57 (2%) developed a second primary cancer. There were no significant differences in the risks of cancer-specific and all-cause mortality between recipients who developed their first cancer after transplant, those with cancer recurrence (adjusted hazard ratios [aHRs], 0.79; 95% confidence interval [95% CI], 0.38-1.67; P = 0.54 and aHRs, 0.86; 95% CI, 0.45-1.66; P = 0.66, respectively) and recipients who developed a second primary cancer after transplantation (aHRs, 1.01; 95%CI, 0.63-1.62; P = 0.95 and aHRs, 1.16; 95% CI, 0.79-1.69; P = 0.45, respectively). Among patients with a previous history of malignancy, recurrent and second primary cancers are infrequent after renal transplantation. A history of previous malignancy does not have an additive effect on the cancer-specific and overall survival of kidney transplant recipients who develop cancer.

Predicting acute cardiac rejection from donor heart and pre-transplant recipient blood gene expression.

Science.gov (United States)

Hollander, Zsuzsanna; Chen, Virginia; Sidhu, Keerat; Lin, David; Ng, Raymond T; Balshaw, Robert; Cohen-Freue, Gabriela V; Ignaszewski, Andrew; Imai, Carol; Kaan, Annemarie; Tebbutt, Scott J; Wilson-McManus, Janet E; McMaster, Robert W; Keown, Paul A; McManus, Bruce M

2013-02-01

Acute rejection in cardiac transplant patients remains a contributory factor to limited survival of implanted hearts. Currently, there are no biomarkers in clinical use that can predict, at the time of transplantation, the likelihood of post-transplant acute cellular rejection. Such a development would be of great value in personalizing immunosuppressive treatment. Recipient age, donor age, cold ischemic time, warm ischemic time, panel-reactive antibody, gender mismatch, blood type mismatch and human leukocyte antigens (HLA-A, -B and -DR) mismatch between recipients and donors were tested in 53 heart transplant patients for their power to predict post-transplant acute cellular rejection. Donor transplant biopsy and recipient pre-transplant blood were also examined for the presence of genomic biomarkers in 7 rejection and 11 non-rejection patients, using non-targeted data mining techniques. The biomarker based on the 8 clinical variables had an area under the receiver operating characteristic curve (AUC) of 0.53. The pre-transplant recipient blood gene-based panel did not yield better performance, but the donor heart tissue gene-based panel had an AUC = 0.78. A combination of 25 probe sets from the transplant donor biopsy and 18 probe sets from the pre-transplant recipient whole blood had an AUC = 0.90. Biologic pathways implicated include VEGF- and EGFR-signaling, and MAPK. Based on this study, the best predictive biomarker panel contains genes from recipient whole blood and donor myocardial tissue. This panel provides clinically relevant prediction power and, if validated, may personalize immunosuppressive treatment and rejection monitoring. Copyright © 2013 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

Proteinuria in Egyptian renal transplant recipients

Directory of Open Access Journals (Sweden)

Essam Khedr

2015-01-01

Full Text Available To evaluate the prevalence, risk factors, possible etiology, prognosis and management of proteinuria in renal transplant recipients, we studied 435 adult renal transplant recipient patients randomly selected from our center; 394 patients were reviewed retrospectively and 41 patients were followed-up prospectively for a period of one year. The patients were classified into three groups according to the results of urinalysis and spot urinary albumin creatinine ratio: Group A patients with normoalbuminuria; Group B patients with microalbuminuria; and Group C patients with macroalbuminuria. Persistent post-transplantation proteinuria was detected in 125 (28.8% patients. The etiology of post-transplantation proteinuria included chronic allograft dysfunction in 44 (35.2% patients, acute rejection in 40 (32% patients, transplant glomerulopathy in eight (6.4% patients, glomerular disease in 16 (12.8% patients and other etiology in 17 (13.6% patients. Proteinuric patients demonstrated significantly lower graft survival rates than did those without proteinuria (48.3% versus 51.7%, respectively; P = 0.017; Risk Ratio = 0.403; 95% confidence interval 0.188-0.862. We conclude that proteinuria is prevalent after kidney transplant in our population, and that it is most commonly associated with chronic allograft nephropathy, transplant glomerulopathy, glomerulonephritis and acute rejection. Post-transplant proteinuria is associated with decreased allograft survival.

Respiratory Failure due to Possible Donor-Derived Sporothrix schenckii Infection in a Lung Transplant Recipient

Directory of Open Access Journals (Sweden)

Nathan C. Bahr

2015-01-01

Full Text Available Background. De novo and donor-derived invasive fungal infections (IFIs contribute to morbidity and mortality in solid organ transplant (SOT recipients. Reporting of donor-derived IFIs (DDIFIs to the Organ Procurement Transplant Network has been mandated since 2005. Prior to that time no systematic monitoring of DDIFIs occurred in the United States. Case Presentation. We report a case of primary graft dysfunction in a 49-year-old male lung transplant recipient with diffuse patchy bilateral infiltrates likely related to pulmonary Sporothrix schenckii infection. The organism was isolated from a bronchoalveolar lavage on the second day after transplantation. Clinical and radiographic responses occurred after initiation of amphotericin B lipid formulation. Conclusion. We believe that this was likely a donor-derived infection given the early timing of the Sporothrix isolation after transplant in a bilateral single lung transplant recipient. This is the first case report of sporotrichosis in a lung transplant recipient. Our patient responded well to amphotericin induction therapy followed by maintenance therapy with itraconazole. The implications of donor-derived fungal infections and Sporothrix in transplant recipients are reviewed. Early recognition and management of these fungi are essential in improving outcomes.

Complementary and Alternative Medicine Use Among Patients With Chronic Kidney Disease and Kidney Transplant Recipients.

Science.gov (United States)

Osman, Noha A; Hassanein, Safaa M; Leil, Marwa M; NasrAllah, Mohamed M

2015-11-01

To explore and compare complementary and alternative medicine (CAM) practice among subsets of patients with chronic kidney disease (CKD) and renal allograft recipients. Cross-sectional survey questionnaire. Three outpatient nephrology clinics and dialysis centers in Egypt. A total of 1005 subjects were included in the study (560 predialyis patients with CKD 3-4, 245 patients on hemodialysis, and 200 transplant recipients). Face to face interview with CKD patients. The survey inquired about epidemiological data, types, sources, and patterns of CAM used as well as the effect of CAM use on the patients' interaction with modern medicine and clinical caregivers. (1) Prevalence and types of CAM used by CKD patients; (2) Associations and correlates of CAM use including epidemiological features, impact of CAM use on adherence to conventional treatment and interaction of the users with modern medical systems; (3) Differences in CAM practice between subsets of CKD patients viz. hemodialysis patients, CKD 3-4, and transplant recipients. Overall, 522 patients (52%) were using CAM (64% of predialyis patients, 33% of dialysis patients, and 40.5% of transplant recipients, P transplant recipients were more likely to report P Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

Orangutans modify facial displays depending on recipient attention

Directory of Open Access Journals (Sweden)

Bridget M. Waller

2015-03-01

Full Text Available Primate facial expressions are widely accepted as underpinned by reflexive emotional processes and not under voluntary control. In contrast, other modes of primate communication, especially gestures, are widely accepted as underpinned by intentional, goal-driven cognitive processes. One reason for this distinction is that production of primate gestures is often sensitive to the attentional state of the recipient, a phenomenon used as one of the key behavioural criteria for identifying intentionality in signal production. The reasoning is that modifying/producing a signal when a potential recipient is looking could demonstrate that the sender intends to communicate with them. Here, we show that the production of a primate facial expression can also be sensitive to the attention of the play partner. Using the orangutan (Pongo pygmaeus Facial Action Coding System (OrangFACS, we demonstrate that facial movements are more intense and more complex when recipient attention is directed towards the sender. Therefore, production of the playface is not an automated response to play (or simply a play behaviour itself and is instead produced flexibly depending on the context. If sensitivity to attentional stance is a good indicator of intentionality, we must also conclude that the orangutan playface is intentionally produced. However, a number of alternative, lower level interpretations for flexible production of signals in response to the attention of another are discussed. As intentionality is a key feature of human language, claims of intentional communication in related primate species are powerful drivers in language evolution debates, and thus caution in identifying intentionality is important.

Urinary Tract Infection among Renal Transplant Recipients in Yemen.

Directory of Open Access Journals (Sweden)

Adnan S Gondos

Full Text Available Urinary tract infection (UTI is the most common complication following kidney transplantation (KT, which could result in losing the graft. This study aims to identify the prevalence of bacterial UTI among KT recipients in Yemen and to determine the predisposing factors associated with post renal transplantation UTI. A cross sectional study included of 150 patients, who underwent KT was conducted between June 2010 and January 2011. A Morning mid-stream urine specimen was collected for culture and antibiotic susceptibility test from each recipient. Bacterial UTI was found in 50 patients (33.3%. The prevalence among females 40.3% was higher than males 29%. The UTI was higher in the age group between 41-50 years with a percentage of 28% and this result was statistically significant. Predisposing factors as diabetes mellitus, vesicoureteral reflux, neurogenic bladder and polycystic kidney showed significant association. High relative risks were found for polycystic kidney = 13.5 and neurogenic bladder = 13.5. The most prevalent bacteria to cause UTI was Escherichia coli represent 44%, followed by Staphylococcus saprophyticus 34%. Amikacin was the most effective antibiotic against gram-negative isolates while Ciprofloxacin was the most effective antibiotic against Staphylococcus saprophyticus. In conclusion, there is high prevalence of bacterial UTI among KT recipients in Yemen. Diabetes mellitus, vesicoureteral reflux, neurogenic bladder, polycystic kidney and calculi were the main predisposing factors.

Urinary Tract Infection among Renal Transplant Recipients in Yemen.

Science.gov (United States)

Gondos, Adnan S; Al-Moyed, Khaled A; Al-Robasi, Abdul Baki A; Al-Shamahy, Hassan A; Alyousefi, Naelah A

2015-01-01

Urinary tract infection (UTI) is the most common complication following kidney transplantation (KT), which could result in losing the graft. This study aims to identify the prevalence of bacterial UTI among KT recipients in Yemen and to determine the predisposing factors associated with post renal transplantation UTI. A cross sectional study included of 150 patients, who underwent KT was conducted between June 2010 and January 2011. A Morning mid-stream urine specimen was collected for culture and antibiotic susceptibility test from each recipient. Bacterial UTI was found in 50 patients (33.3%). The prevalence among females 40.3% was higher than males 29%. The UTI was higher in the age group between 41-50 years with a percentage of 28% and this result was statistically significant. Predisposing factors as diabetes mellitus, vesicoureteral reflux, neurogenic bladder and polycystic kidney showed significant association. High relative risks were found for polycystic kidney = 13.5 and neurogenic bladder = 13.5. The most prevalent bacteria to cause UTI was Escherichia coli represent 44%, followed by Staphylococcus saprophyticus 34%. Amikacin was the most effective antibiotic against gram-negative isolates while Ciprofloxacin was the most effective antibiotic against Staphylococcus saprophyticus. In conclusion, there is high prevalence of bacterial UTI among KT recipients in Yemen. Diabetes mellitus, vesicoureteral reflux, neurogenic bladder, polycystic kidney and calculi were the main predisposing factors.

Applying the Theory of Diffusion of Innovations to Understand Electronic Benefit Transfer Technology Adoption at Mid-West Farmers Markets

Science.gov (United States)

Hasin, Afroza

2016-01-01

The Supplemental Nutrition Assistance Program (SNAP, previously "food stamps"), is the nation's largest federal entitlement nutritional assistance program which assists individuals and households living below the federal poverty level in order to reduce the amount of money they spend on food. With the conversion of food stamps coupons to…

Kaposi's sarcoma in renal transplant recipients: Experience at ...

African Journals Online (AJOL)