Influence of prepreg characteristics on stamp consolidation

Science.gov (United States)

Slange, T. K.; Warnet, L. L.; Grouve, W. J. B.; Akkerman, R.

2017-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and partial preconsolidation. This partial preconsolidation makes the influence of prepreg more critical compared to conventional preconsolidation methods which provide full preconsolidation. This paper aims to highlight consolidation challenges that can appear when stamp forming blanks manufactured by automated lay-up. Important prepreg characteristics were identified based on an experimental study where a comparison was made between various prepreg in their as-received, deconsolidated and stamp consolidated state. It was found that adding up small thickness variations across the width of a prepreg when stacking plies into a blank by automated lay-up can cause non-uniform consolidation. Additionally, deconsolidation of the prepreg does not seem to obstruct interlaminar bonding, while intralaminar voids initially present in a prepreg cannot be removed during stamp forming. An additional preconsolidation step after automated lay-up seems necessary to remove blank thickness variations and intralaminar voids for the current prepregs. Eliminating this process step and the successful combination of rapid automated lay-up and stamp forming requires prepregs which are void-free and have less thickness variation.

Ex-Post : The Investment Performance of Collectible Stamps

NARCIS (Netherlands)

Dimson, E.; Spaenjers, C.

2009-01-01

This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

Tribological Behavior of Laser Textured Hot Stamping Dies

Directory of Open Access Journals (Sweden)

Andre Shihomatsu

2016-01-01

Full Text Available Hot stamping of high strength steels has been continuously developed in the automotive industry to improve mechanical properties and surface quality of stamped components. One of the main challenges faced by researchers and technicians is to improve stamping dies lifetime by reducing the wear caused by high pressures and temperatures present during the process. This paper analyzes the laser texturing of hot stamping dies and discusses how different surfaces textures influence the lubrication and wear mechanisms. To this purpose, experimental tests and numerical simulation were carried out to define the die region to be texturized and to characterize the textured surface topography before and after hot stamping tests with a 3D surface profilometer and scanning electron microscopy. Results showed that laser texturing influences the lubrication at the interface die-hot sheet and improves die lifetime. In this work, the best texture presented dimples with the highest diameter, depth, and spacing, with the surface topography and dimples morphology practically preserved after the hot stamping tests.

The effect of cushion-ram pulsation on hot stamping

Science.gov (United States)

Landgrebe, Dirk; Rautenstrauch, Anja; Kunke, Andreas; Polster, Stefan; Kriechenbauer, Sebastian; Mauermann, Reinhard

2016-10-01

Hot stamping is an important technology for manufacturing high-strength components. This technology offers the possibility to achieve significant weight reductions. In this study, cushion-ram pulsation (CRP), a new technology for hot stamping on servo-screw presses, was investigated and applied for hot stamping. Compared to a conventional process, the tests yielded a significantly higher drawing depth. In this paper, the CRP technology and the first test results with hot stamping were described in comparison to the conventional process.

27 CFR 479.87 - Cancellation of stamp.

Science.gov (United States)

2010-04-01

... OTHER FIREARMS Transfer Tax Application and Order for Transfer of Firearm § 479.87 Cancellation of stamp. The method of cancellation of the stamp required by this subpart as prescribed in § 479.67 shall be used. Exemptions Relating to Transfers of Firearms ...

Influence of Prepreg Characteristics on Stamp Consolidation

NARCIS (Netherlands)

Slange, T.K.; Warnet, L.L.; Grouve, W.J.B.; Akkerman, R.

2017-01-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. The development of automated lay-up technologies further extends the applicability of stamp forming by allowing rapid lay-up of tailored blanks and

Analysis of alternative technologies stamping compressor blades of marine engines

Directory of Open Access Journals (Sweden)

Олександр Сергійович Аніщенко

2015-10-01

Full Text Available The author has made an analysis of several technologies stamping forgings compressor blades from titanium alloy ВT3-1. These technologies use different types of forming equipment: crank hot press, high-speed hammers, screw presses with hydraulic drive (SPHD, as well as isothermal forging hydraulic press. He pointed out the main advantages and disadvantages of the technology, noting that high-speed punching in the shipbuilding industry of Ukraine is not used for the manufacture of forgings blades. The article contains an economic analysis of the cost of forgings blades, which are made on four technologies: punching and calibration to crank hot press, stamping and calibration to press for isothermal forging, stamping and calibration on SPHD-press, stamping on SPHD-press and calibration to press for isothermal forging. The author has identified the effective use of these technologies. He showed that the use of SPHD-presses and hydraulic presses for isothermal forging reduces the cost of forging on the average 12% in comparison with the technology at the crank hot stamping press, increases the utilization of metal 1,3-1,5 times more, reduces power consumption 1,05-3,0 times less and complexity of manufacturing 1,8-4,2 times. However SPHD-press increases capital investment in the organization of stamping technology 2,6-5,3 times more and depreciation 2-4 times. Isothermal forging technology requires the cost of the stamps in 1,4-2,0 times higher than stamps for crank presses. The author argues that stamping forging blades technology improvement should be implemented saving basic materials first of all. Efficiency of isothermal stamping and calibration will be the higher, the more geometric dimensions of stamped forgings are

DC-STAMP Is an Osteoclast Fusogen Engaged in Periodontal Bone Resorption.

Science.gov (United States)

Wisitrasameewong, W; Kajiya, M; Movila, A; Rittling, S; Ishii, T; Suzuki, M; Matsuda, S; Mazda, Y; Torruella, M R; Azuma, M M; Egashira, K; Freire, M O; Sasaki, H; Wang, C Y; Han, X; Taubman, M A; Kawai, T

2017-06-01

Dendritic cell-specific transmembrane protein (DC-STAMP) plays a key role in the induction of osteoclast (OC) cell fusion, as well as DC-mediated immune regulation. While DC-STAMP gene expression is upregulated in the gingival tissue with periodontitis, its pathophysiological roles in periodontitis remain unclear. To evaluate the effects of DC-STAMP in periodontitis, anti-DC-STAMP-monoclonal antibody (mAb) was tested in a mouse model of ligature-induced periodontitis ( n = 6-7/group) where Pasteurella pneumotropica ( Pp)-reactive immune response activated T cells to produce receptor activator of nuclear factor kappa-B ligand (RANKL), which, in turn, promotes the periodontal bone loss via upregulation of osteoclastogenesis. DC-STAMP was expressed on the cell surface of mature multinuclear OCs, as well as immature mononuclear OCs, in primary cultures of RANKL-stimulated bone marrow cells. Anti-DC-STAMP-mAb suppressed the emergence of large, but not small, multinuclear OCs, suggesting that DC-STAMP is engaged in the late stage of cell fusion. Anti-DC-STAMP-mAb also inhibited pit formation caused by RANKL-stimulated bone marrow cells. Attachment of ligature to a second maxillary molar induced DC-STAMP messenger RNA and protein, along with elevated tartrate-resistant acid phosphatase-positive (TRAP+) OCs and alveolar bone loss. As we expected, systemic administration of anti-DC-STAMP-mAb downregulated the ligature-induced alveolar bone loss. Importantly, local injection of anti-DC-STAMP-mAb also suppressed alveolar bone loss and reduced the total number of multinucleated TRAP+ cells in mice that received ligature attachment. Attachment of ligature induced significantly elevated tumor necrosis factor-α, interleukin-1β, and RANKL in the gingival tissue compared with the control site without ligature ( P < 0.05), which was unaffected by local injection with either anti-DC-STAMP-mAb or control-mAb. Neither in vivo anti- Pp IgG antibody nor in vitro anti- Pp T

Development of Methods and Equipment for Sheet Stamping

Science.gov (United States)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

How Do Stamp Duties Affect the Housing Market?

OpenAIRE

Davidoff, Ian; Leigh, Andrew

2013-01-01

Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

Postage stamps: A convergence of metallurgy, art, and history

Science.gov (United States)

Habashi, Fathi

2002-04-01

Postage stamps have been used around the world to commemorate, in miniature, significant events and people, including those of importance in the history of metals and mineral production. From the presence of gold artifacts in an ancient Egyptian tomb to the role of uranium in nuclear power, stamps have captured the evolution of metallurgical processes. This article highlights some of those stamps.

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

International Nuclear Information System (INIS)

Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

2013-01-01

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

Minerals on postage stamps: A mix of art, history, economics and geography

Science.gov (United States)

Glover, Paul

2010-05-01

Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

Fast thermal nanoimprint lithography by a stamp with integrated heater

DEFF Research Database (Denmark)

Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

2008-01-01

We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

Patterning of polymers: precise channel stamping by optimizing wetting properties

International Nuclear Information System (INIS)

Seemann, Ralf; Kramer, Edward J; Lange, Frederick F

2004-01-01

Channel stamping is a soft lithography technique that can be used to fabricate small structures of polymeric materials. This technique is cheap and easy but a considerable drawback is the fact that reproduction of the patterns of the stamp is often imprecise due to the wetting properties of liquid and stamp. In this paper, we report on experiments that reveal the parameters governing the behaviour of liquids in grooves and on edges. Optimizing these parameters leads to better-quality channel-stamped structures and enables the design of sophisticated structured polymeric materials, allowing channels as small as about 100 nm to be fabricated. Moreover, we show that it is even possible to build up a freestanding three-dimensional structure by stamping line patterns on top of each other

SPS commemorative stamp

CERN Multimedia

1977-01-01

The turn on of the SPS was commemorated in France by the issue of a CERN stamp. The date of issue, 22 Octber 1976, coincided with the first tests of the beam line taking particles to experiments in the West Hall. (CERN Courier 1976 p. 382)

Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

OpenAIRE

Wood, Gavin A.

1994-01-01

The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

A compact system for large-area thermal nanoimprint lithography using smart stamps

DEFF Research Database (Denmark)

Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure...... for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment...

Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

Science.gov (United States)

Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

2002-01-01

The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

Cost-benefit analysis of providing a special subsistence allowance to military personnel who qualify for food stamps

OpenAIRE

Becker, Curtis A., Jr.

2000-01-01

Approved for public release, distribution is unlimited Recent reports cite that military Food Stamp Program beneficiaries may range from 6,400 to 20,000. The need for food stamps has been attributed to several factors, one of which is the perceived military "pay gap". Although, significant strides have been made in recent years to improve quality of life for our service men and women and their families, the military pay system tends to lag behind the civilian employment cost growth index. ...

Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

Energy Technology Data Exchange (ETDEWEB)

Meng Fantao; Chu Jinkui [Key Laboratory for Micro/Nano Technology and System of Liaoning Province, Dalian University of Technology, 116024 Dalian (China); Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak [Obducat AB, SE-20125 Malmoe (Sweden); Maximov, Ivan; Montelius, Lars; Xu, H Q [Division of Solid State Physics, Lund University, Box 118, S-22100 Lund (Sweden); Nilsson, Lars, E-mail: ivan.maximov@ftf.lth.se [Department of Food Technology, Engineering and Nutrition, Lund University, Box 117, S-22100 Lund (Sweden)

2011-05-06

Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

Energy Technology Data Exchange (ETDEWEB)

Choi, So Young; Kim, Jong Do [Korea Maritime and Ocean University, Busan (Korea, Republic of); Kim, Jong Su [Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-01-15

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

International Nuclear Information System (INIS)

Choi, So Young; Kim, Jong Do; Kim, Jong Su

2015-01-01

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained

Stamp Detection in Color Document Images

DEFF Research Database (Denmark)

Micenkova, Barbora; van Beusekom, Joost

2011-01-01

, moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

A New Key-lock Method for User Authentication and Access Control

Institute of Scientific and Technical Information of China (English)

JI Dongyao; ZHANG Futai; WANG Yumin

2001-01-01

We propose a new key-lock methodfor user authentication and access control based onChinese remainder theorem, the concepts of the ac-cess control matrix, key-lock-pair, time stamp, and the NS public key protocol. Our method is dynamicand needs a minimum amount of computation in thesense that it only updates at most one key/lock foreach access request. We also demonstrate how an au-thentication protocol can be integrated into the ac-cess control method. By applying a time stamp, themethod can not only withstand replay attack, butalso strengthen the authenticating mechanism, whichcould not be achieved simultaneously in previous key-lock methods.

Draw-in Map - A Road Map for Simulation-Guided Die Tryout and Stamping Process Control

International Nuclear Information System (INIS)

Wang Chuantao; Zhang, Jimmy J.; Goan, Norman

2005-01-01

Sheet metal forming is a displacement or draw-in controlled manufacturing process in which a flat blank is drawn into die cavity to form an automotive body panel. Draw-in amount is the single most important stamping manufacturing index that controls all forming characteristics (strains, stresses, thinning, etc.), stamping failures (splits, wrinkles, surface distortion, etc.) and line die operations and automations. Draw-in Map is engineered for math-based die developments via advanced stamping simulation technology. Then the Draw-in Map is provided to die makers in plants as a road map for math-guided die tryout in which the die tryout workers follow the engineered tryout conditions and matches the engineered draw-in amount so that the tryout time and cost are greatly reduced, and quality is ensured. The Map can also be used as a math-based trouble-shooting tool to identify the causes of formability problems in stamping production. The engineered Draw-in Map has been applied to all draw die tryout for all GM vehicle programs since 1998. A minimum 50% reduction in both lead-time and cost and significant improvement in panel quality in tryout have been reported. This paper presents the concept and process to apply the engineered Draw-in Map in die tryout

77 FR 66052 - Program Access Rules

Science.gov (United States)

2012-10-31

... delivered, cable-affiliated RSNs in the 2010 Program Access Order. 3. With respect to the first element (the... exclusive contract involving a cable-affiliated RSN is an ``unfair act.'' In the 2010 Program Access Order... Agreements 18. ACA also urges the Commission to revise the program access rules to prohibit cable-affiliated...

Time Stamp Synchronization of PEFP Distributed Control Systems

International Nuclear Information System (INIS)

Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

2010-01-01

Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

Direct stamping of silver nanoparticles toward residue-free thick electrode

Directory of Open Access Journals (Sweden)

Jiseok Kim, Kevin Wubs, Byeong-Soo Bae and Woo Soo Kim

2012-01-01

Full Text Available Direct stamping of functional materials has been developed for cost-effective and process-effective manufacturing of nano/micro patterns. However, there remain several challenging issues like the perfect removal of the residual layer and realization of high aspect ratio. We have demonstrated facile fabrication of flexible strain sensors that have microscale thick interdigitated capacitors with no residual layer by a simple direct stamping with silver nanoparticles (AgNPs. Polyurethane (PU prepolymer was utilized as an adhesive layer to transfer AgNPs more efficiently during the separation step of the flexible stamp from directly stamped AgNPs. Scanning electron microscopy images and energy dispersive x-ray spectroscopy analysis revealed residue-free transfer of microscale thick interdigitated electrodes onto two different flexible substrates (elastomeric and brittle for the application to highly sensitive strain sensors.

Can Food Stamps Do More to Improve Food Choices? An Economic Perspective--Making Healthy Food Choices Easier: Ideas From Behavioral Economics

OpenAIRE

Mancino, Lisa; Andrews, Margaret S.

2007-01-01

With obesity the most prevalent nutrition problem facing Americans at all economic levels, promoting diets that provide adequate nutrition without too many calories has become an important objective for the Food Stamp Program. Findings from behavioral economics suggest innovative, low-cost ways to improve the diet quality of food stamp participants without restricting their freedom of choice. Unlike more traditional economic interventions, such as changing prices or banning specific foods, th...

A compact system for large-area thermal nanoimprint lithography using smart stamps

International Nuclear Information System (INIS)

Pedersen, R H; Hansen, O; Kristensen, A

2008-01-01

We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure for successful imprint is reduced. Additionally, the stamp is capable of performing controlled demolding after imprint. Due to the complexity of the stamp, a compact and cost-effective imprint apparatus can be constructed. The design and fabrication of the advanced stamp as well as the simple imprint equipment is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for µm-scale features is demonstrated

Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

Science.gov (United States)

Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

2015-05-29

Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

Stamp duties in Indian states - a case for reform

OpenAIRE

Alm, James; Annez, Patricia; Modi, Arbind

2004-01-01

The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

Directory of Open Access Journals (Sweden)

CARAUS MADALINA

2015-12-01

Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

Application of Modified Digital Halftoning Techniques to Data Hiding in Personalized Stamps

Institute of Scientific and Technical Information of China (English)

Hsi-Chun Wang; Chi-Ming Lian; Pei-Chi Hsiao

2004-01-01

The objective of this research is to embed information in personalized stamps by modified digital halftoning techniques. The displaced and deformed halftone dots are used to encode data in the personalized stamps. Hidden information can be retrieved by either an optical decoder or digital image processing techniques.The results show that personalized stamps with value-added features like data hiding or digital watermarking can be successfully implemented.

Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

Science.gov (United States)

Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

2017-12-01

LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

27 CFR 70.332 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

Science.gov (United States)

Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

2009-09-08

The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

Directory of Open Access Journals (Sweden)

Juergen Brugger

2013-10-01

Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

Stamping the Earth from space

CERN Document Server

Dicati, Renato

2017-01-01

This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

POLYELECTROLYTE MULTILAYER STAMPING IN AQUEOUS PHASE AND NON-CONTACT MODE

Science.gov (United States)

Mehrotra, Sumit; Lee, Ilsoon; Liu, Chun; Chan, Christina

2011-01-01

Polyelectrolyte multilayer (PEM) transfer printing has been previously achieved by stamping under dry conditions. Here, we show for the first time, that PEM can be transferred from a stamp to the base substrate under aqueous conditions whereby the two surfaces are in a non-contact mode. Degradable multilayers of (PAA/PEG)10.5 followed by non-degradable multilayers of (PDAC/SPS)80.5 were fabricated under acidic pH conditions on either PDMS or glass (stamp), and subsequently transferred over top of another multilayer prepared on a different substrate (base substrate), with a spacing of ~ 200 μm between the stamping surface and the base substrate. This multilayer transfer was performed under physiological pH conditions. This process is referred to herein as non-contact, aqueous-phase multilayer (NAM) transfer. NAM transfer can be useful for applications such as fabricating three-dimensional (3-D) cellular scaffolds. We attempted to create a 3-D cellular scaffold using NAM transfer, and characterized the scaffolds with conventional and fluorescence microscopy. PMID:21860540

Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

Science.gov (United States)

Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

2018-01-01

The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

Bifunctional, Chemically Patterned Flat Stamps for Microcontact Printing of Polar Inks

NARCIS (Netherlands)

Duan, X.; Sadhu, V.B.; Perl, A.; Péter, M.; Reinhoudt, David; Huskens, Jurriaan

2008-01-01

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full

41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

Science.gov (United States)

Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

2016-10-01

Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

Notified Access: Extending Remote Memory Access Programming Models for Producer-Consumer Synchronization

KAUST Repository

Belli, Roberto; Hoefler, Torsten

2015-01-01

Remote Memory Access (RMA) programming enables direct access to low-level hardware features to achieve high performance for distributed-memory programs. However, the design of RMA programming schemes focuses on the memory access and less on the synchronization. For example, in contemporary RMA programming systems, the widely used producer-consumer pattern can only be implemented inefficiently, incurring in an overhead of an additional round-trip message. We propose Notified Access, a scheme where the target process of an access can receive a completion notification. This scheme enables direct and efficient synchronization with a minimum number of messages. We implement our scheme in an open source MPI-3 RMA library and demonstrate lower overheads (two cache misses) than other point-to-point synchronization mechanisms for each notification. We also evaluate our implementation on three real-world benchmarks, a stencil computation, a tree computation, and a Colicky factorization implemented with tasks. Our scheme always performs better than traditional message passing and other existing RMA synchronization schemes, providing up to 50% speedup on small messages. Our analysis shows that Notified Access is a valuable primitive for any RMA system. Furthermore, we provide guidance for the design of low-level network interfaces to support Notified Access efficiently.

Notified Access: Extending Remote Memory Access Programming Models for Producer-Consumer Synchronization

KAUST Repository

Belli, Roberto

2015-05-01

Remote Memory Access (RMA) programming enables direct access to low-level hardware features to achieve high performance for distributed-memory programs. However, the design of RMA programming schemes focuses on the memory access and less on the synchronization. For example, in contemporary RMA programming systems, the widely used producer-consumer pattern can only be implemented inefficiently, incurring in an overhead of an additional round-trip message. We propose Notified Access, a scheme where the target process of an access can receive a completion notification. This scheme enables direct and efficient synchronization with a minimum number of messages. We implement our scheme in an open source MPI-3 RMA library and demonstrate lower overheads (two cache misses) than other point-to-point synchronization mechanisms for each notification. We also evaluate our implementation on three real-world benchmarks, a stencil computation, a tree computation, and a Colicky factorization implemented with tasks. Our scheme always performs better than traditional message passing and other existing RMA synchronization schemes, providing up to 50% speedup on small messages. Our analysis shows that Notified Access is a valuable primitive for any RMA system. Furthermore, we provide guidance for the design of low-level network interfaces to support Notified Access efficiently.

Time-stamping system for nuclear physics experiments at RIKEN RIBF

International Nuclear Information System (INIS)

Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

2015-01-01

A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

Comparison between Laser and Stamping without Die (SWD for Micro Tapered Hole Forming

Directory of Open Access Journals (Sweden)

Yung-Chou Hung

2016-03-01

Full Text Available The forming of a micro tapered hole is based on nanosecond pulsed laser processing, which conforms to fast processing time and high throughput; however, the microhole quality should be improved. Micro stamping is a technology providing high precise size and speed. The greatest difficulty in forming a microhole by micro stamping is the precision alignment of the punch head to the lower die. In order to overcome the difficulty, we proposed a concept of stamping without die (SWD. Without a lower die, the tapered punch head was directly applied to the workpiece for micro stamping, and a thicker workpiece surrounding the punching area provides a better support to the stamping process. Thus, a successful forming of micro tapered holes is completed. The micro tapered hole depth is 300 μm, and the maximum ratio of inlet to outlet diameter is 18:1. In order to reduce the number of experiments, the finite element analysis software DEFORM-3D was used for forming analysis. The simulation forecast result was compared with the experimental processing, which was well validated. Under different experimental parameters of laser energy and defocusing distance, drilling results by two methods show that the microhole quality by stamping process is better than by laser processing.

Characteristic Evaluation of Organic Light-Emitting Diodes Prepared with Stamp Printing Technique

Directory of Open Access Journals (Sweden)

Apisit Chittawanij

2017-01-01

Full Text Available We have reported on a stamp printing technique that uses PET release film as a printing stamp to deposit TPBi thin film served as the electron transport layer of the organic light-emitting diodes. TPBi thin film was printed with a good uniformity and resolution. Effect of deposition conditions on optical and electrical properties and surface roughness of TPBi thin film have been studied under spectroscopy and atomic force microscopy, respectively. It is found that characteristic of TPBi thin film is improved via controlled stamp temperature and time. Since TPBi thin film exhibits the surface morphology comparable to that of conventional spin-coating thin film, our findings suggest that PET release film-based stamp printing approach is possible to use as an alternative deposition of the organic thin film as compared with a traditional one.

Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

Directory of Open Access Journals (Sweden)

Liu Xiaochuan

2015-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

Over, under, or about right: misperceptions of body weight among food stamp participants.

Science.gov (United States)

Ver Ploeg, Michele L; Chang, Hung-Hao; Lin, Biing-Hwan

2008-09-01

The purpose of this research was to investigate the associations between misperception of body weight and sociodemographic factors such as food stamp participation status, income, education, and race/ethnicity. National Health and Nutrition Examination Survey (NHANES) data from 1999-2004 and multivariate logistic regression are used to estimate how sociodemographic factors are associated with (i) the probability that overweight adults misperceive themselves as healthy weight; (ii) the probability that healthy-weight adults misperceive themselves as underweight; and (iii) the probability that healthy-weight adults misperceive themselves as overweight. NHANES data are representative of the US civilian noninstitutionalized population. The analysis included 4,362 men and 4,057 women. BMI derived from measured weight and height was used to classify individuals as healthy weight or overweight. These classifications were compared with self-reported categorical weight status. We find that differences across sociodemographic characteristics in the propensity to underestimate or overestimate weight status were more pronounced for women than for men. Overweight female food stamp participants were more likely to underestimate weight status than income-eligible nonparticipants. Among healthy-weight and overweight women, non-Hispanic black and Mexican-American women, and women with less education were more likely to underestimate actual weight status. We found few differences across sociodemographic characteristics for men. Misperceptions of weight are common among both overweight and healthy-weight individuals and vary across socioeconomic and demographic groups. The nutrition education component of the Food Stamp Program could increase awareness of healthy body weight among participants.

Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

Directory of Open Access Journals (Sweden)

Ji Kang

2016-01-01

Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

A rapid co-culture stamping device for studying intercellular communication

Science.gov (United States)

Hassanzadeh-Barforoushi, Amin; Shemesh, Jonathan; Farbehi, Nona; Asadnia, Mohsen; Yeoh, Guan Heng; Harvey, Richard P.; Nordon, Robert E.; Warkiani, Majid Ebrahimi

2016-10-01

Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two adherent cell lines with well-defined interlacing configurations to study cell-cell interactions. We demonstrate post-stamping cell viability of >95%, the stamping of multiple adherent cell types, and the ability to control the seeded cell density. We also show viability, proliferation and migration of cultured cells, enabling analysis of co-culture boundary conditions on cell fate. We also developed an in-vitro model of endothelial and cardiac stem cell interactions, which are thought to regulate coronary repair after myocardial injury. The stamp is fabricated using microfabrication techniques, is operated with a lab pipettor and uses very low reagent volumes of 20 μl with cell injection efficiency of >70%. This easy-to-use device provides a general strategy for micro-patterning of multiple cell types and will be important for studying cell-cell interactions in a multitude of applications.

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

International Nuclear Information System (INIS)

Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

2016-01-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

Science.gov (United States)

Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

2016-02-01

In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

Directory of Open Access Journals (Sweden)

Asiyeh Amouei

2018-02-01

Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

Science.gov (United States)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

49 CFR 28.149 - Program accessibility: Discrimination prohibited.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Program accessibility: Discrimination prohibited... § 28.149 Program accessibility: Discrimination prohibited. Except as otherwise provided in § 28.150, no... otherwise be subjected to discrimination under any program or activity conducted by the Department. ...

32 CFR 1699.149 - Program accessibility: discrimination prohibited.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Program accessibility: discrimination prohibited... CONDUCTED BY SELECTIVE SERVICE SYSTEM § 1699.149 Program accessibility: discrimination prohibited. Except as... participation in, or otherwise be subject to discrimination under any program or activity conducted by the...

DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

Directory of Open Access Journals (Sweden)

Rudi Kurniawan Arief

2017-12-01

Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

Determination of Proper Austenitization Temperatures for Hot Stamping of AISI 4140 Steel

Science.gov (United States)

Samadian, Pedram; Parsa, Mohammad Habibi; Shakeri, Amid

2014-04-01

High strength steels are desirable materials for use in automobile bodies in order to reduce vehicle weight and increase the safety of car passengers, but steel grades with high strength commonly show poor formability. Recently, steels with controlled microstructures and compositions are used to gain adequate strength after hot stamping while maintaining good formability during processing. In this study, microstructure evolutions and changes in mechanical properties of AISI 4140 steel sheets resulting from the hot stamping process at different austenitization temperatures were investigated. To determine the proper austenitization temperatures, the results were compared with those of the cold-worked and cold-worked plus quench-tempered specimens. Comparisons showed that the austenitization temperatures of 1000 and 1100 °C are proper for hot stamping of 3-mm-thick AISI 4140 steel sheets due to the resultant martensitic microstructure which led to the yield and ultimate tensile strength of 1.3 and 2.1 GPa, respectively. Such conditions resulted in more favorable simultaneous strength and elongation than those of hot-stamped conventional boron steels.

Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

Directory of Open Access Journals (Sweden)

Nosova Ekaterina

2017-01-01

Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

Science.gov (United States)

Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

2017-12-01

Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

27 CFR 46.116 - Issuance, distribution, and examination of special tax stamps.

Science.gov (United States)

2010-04-01

... multiple locations, TTB will send to the taxpayer's principal place of business (or principal office in the... attachment to TTB Form 5630.5t required by § 46.101(b)(2). (b) Distribution of special tax stamps for... for each location listed on the attachment to TTB Form 5630.5t and that the information on each stamp...

Kinetic and kinematic analysis of stamping impacts during simulated rucking in rugby union.

Science.gov (United States)

Oudshoorn, Bodil Y; Driscoll, Heather F; Dunn, Marcus; James, David

2018-04-01

Laceration injuries account for up to 23% of injuries in rugby union. They are frequently caused by studded footwear as a result of a player stamping onto another player during the ruck. Little is known about the kinetics and kinematics of rugby stamping impacts; current test methods assessing laceration injury risk of stud designs therefore lack informed test parameters. In this study, twelve participants stamped on an anthropomorphic test device in a one-on-one simulated ruck setting. Velocity and inclination angle of the foot prior to impact was determined from high-speed video footage. Total stamping force and individual stud force were measured using pressure sensors. Mean foot inbound velocity was 4.3 m ∙ s -1 (range 2.1-6.3 m ∙ s -1 ). Mean peak total force was 1246 N and mean peak stud force was 214 N. The total mean effective mass during stamping was 6.6 kg (range: 1.6-13.5 kg) and stud effective mass was 1.2 kg (range: 0.5-2.9 kg). These results provide representative test parameters for mechanical test devices designed to assess laceration injury risk of studded footwear for rugby union.

A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

Science.gov (United States)

Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

2011-08-01

Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

Characterization of thermoplastic composites for hot stamp forming

NARCIS (Netherlands)

Rietman, Bert; Grouve, Wouter; Akkerman, Remko

2014-01-01

This paper describes state-of-the-art characterization methods for thermoplastic composites at high processing temperature and provides a few examples of application in simulations of the hot stamp forming process.

Fabrication of Ni stamp with high aspect ratio, two-leveled, cylindrical microstructures using dry etching and electroplating

DEFF Research Database (Denmark)

Petersen, Ritika Singh; Keller, Stephan Sylvest; Hansen, Ole

2015-01-01

obtained by defining a reservoir and a separating trench with different depths of 85 and 125 μm, respectively, in a single embossing step. The fabrication of the required two leveled stamp is done using a modified DEEMO (dry etching, electroplating and molding) process. Dry etching using the Bosch process...... and electroplating are optimized to obtain a stamp with smooth stamp surfaces and a positive sidewall profile. Using this stamp, hot embossing is performed successfully with excellent yield and high replication fidelity....

Cooling Systems Design in Hot Stamping Tools by a Thermal-Fluid-Mechanical Coupled Approach

Directory of Open Access Journals (Sweden)

Tao Lin

2014-06-01

Full Text Available Hot stamping tools with cooling systems are the key facilities for hot stamping process of Ultrahigh strength steels (UHSS in automotive industry. Hot stamping tools have significant influence on the final microstructure and properties of the hot stamped parts. In serials production, the tools should be rapidly cooled by cooling water. Hence, design of hot stamping tools with cooling systems is important not only for workpieces of good quality but also for the tools with good cooling performance and long life. In this paper, a new multifield simulation method was proposed for the design of hot stamping tools with cooling system. The deformation of the tools was also analyzed by this method. Based on MpCCI (Mesh-based parallel Code Coupling Interface, thermal-fluid simulation and thermal-fluid-mechanical coupled simulation were performed. Subsequently, the geometrical parameters of the cooling system are investigated for the design. The results show that, both the distance between the ducts and the distance between the ducts and the tools loaded contour have significant influence on the quenching effect. And better quenching effect can be achieved with the shorter distance from the tool surface and with smaller distance between ducts. It is also shown that, thermal expansion is the main reason for deformation of the hot forming tools, which causes the distortion of the cooling ducts, and the stress concentration at corner of the ducts.

Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012

Directory of Open Access Journals (Sweden)

Joseph G.L. Lee

2017-12-01

Full Text Available Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties from June–October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s (<1%. However, a substantial minority of cigarette packs had damaged tax stamps (13%. This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser. Keywords: Taxes, Smoking, Tobacco products, Government regulation, Government

Soil Temperature and Moisture Profile (STAMP) System Handbook

Energy Technology Data Exchange (ETDEWEB)

Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-11-01

The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

Effects of surface coating on weld growth of resistance spot-welded hot-stamped boron steels

International Nuclear Information System (INIS)

Ji, Chang Wook; Lee, Hyun Ju; Kim, Yang Do; Jo, Il Guk; Choi, Il Dong; Park, Yeong Do

2014-01-01

Aluminum-silicon-based and zinc-based metallic coatings have been widely used for hot-stamped boron steel in automotive applications. In this study, resistance spot weldability was explored by investigating the effects of the properties of metallic coating layers on heat development and nugget growth during resistance spot welding. In the case of the aluminum-silicon-coated hot-stamped boron steel, the intermetallic coating transformed into a liquid film that covered the faying interface. A wide, weldable current range was obtained with slow heat development because of low contact resistance and large current passage. In the case of the zinc-coated hot-stamped boron steel, a buildup of liquid and vapor formation under large vapor pressure was observed at the faying interface because of the high contact resistance and low vaporization temperature of the intermetallic layers. With rapid heat development, the current passage was narrow because of the limited continuous layer at the faying interface. A more significant change in nugget growth was observed in the zinc coated hot-stamped boron steel than in the aluminum-silicon-coated hot-stamped boron steel.

45 CFR 2490.150 - Program accessibility: Existing facilities.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Program accessibility: Existing facilities. 2490.150 Section 2490.150 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON... ACTIVITIES CONDUCTED BY THE JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION § 2490.150 Program accessibility...

STAMP model and its application prospect in DCS safety analysis of nuclear power plant

International Nuclear Information System (INIS)

Yang Xiaohua; Liu Jie; Liu Zhaohui; Liu Hua; Yu Tonglan

2013-01-01

The application of DCS (Digit Control System) is a certain trend for the development of nuclear power. DCS not only improves the control capability of nuclear power system, but also increases the complexity of the system. Traditional safety analysis techniques based on event-chain model are facing challenges. In order to improve the safety performance of nuclear power DCS, the latest research achievement in the field of safety engineering should be focused, studied and applied into nuclear power safety. This paper introduces a new safety analysis model named STAMP (Systems-Theoretic Accident Modeling and Processes) based on the system theory, analyzes its advantages and disadvantages compared with the traditional ones, and explains the basic steps of STPA (STAMP-Based Hazard Analysis) technology. Finally, according to the application status of STAMP at home and abroad, it prospects the development of STAMP in China's nuclear power safety. (authors)

Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

CERN Document Server

Lim, Yongseob; Ulsoy, A Galip

2014-01-01

Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

Access to Investigational Drugs: FDA Expanded Access Programs or "Right-to-Try" Legislation?

Science.gov (United States)

Holbein, M E Blair; Berglund, Jelena P; Weatherwax, Kevin; Gerber, David E; Adamo, Joan E

2015-10-01

The Food and Drug Administration Expanded Access (EA) program and "Right-to-Try" legislation aim to provide seriously ill patients who have no other comparable treatment options to gain access to investigational drugs and biological agents. Physicians and institutions need to understand these programs to respond to questions and requests for access. FDA EA programs and state and federal legislative efforts to provide investigational products to patients by circumventing FDA regulations were summarized and compared. The FDA EA program includes Single Patient-Investigational New Drug (SP-IND), Emergency SP-IND, Intermediate Sized Population IND, and Treatment IND. Approval rates for all categories exceed 99%. Approval requires FDA and Institutional Review Board (IRB) approval, and cooperation of the pharmaceutical partner is essential. "Right-to-Try" legislation bypasses some of these steps, but provides no regulatory or safety oversight. The FDA EA program is a reasonable option for patients for whom all other therapeutic interventions have failed. The SP-IND not only provides patient access to new drugs, but also maintains a balance between immediacy and necessary patient protection. Rather than circumventing existing FDA regulations through proposed legislation, it seems more judicious to provide the knowledge and means to meet the EA requirements. © 2015 Wiley Periodicals, Inc.

A novel IPTV program multiplex access system to EPON

Science.gov (United States)

Xu, Xian; Liu, Deming; He, Wei; Lu, Xi

2007-11-01

With the rapid development of high speed networks, such as Ethernet Passive Optical Network (EPON), traffic patterns in access networks have evolved from traditional text-oriented service to the mixed text-, voice- and video- based services, leading to so called "Triple Play". For supporting IPTV service in EPON access network infrastructure, in this article we propose a novel IPTV program multiplex access system to EPON, which enables multiple IPTV program source servers to seamlessly access to IPTV service access port of optical line terminal (OLT) in EPON. There are two multiplex schemes, namely static multiplex scheme and dynamic multiplex scheme, in implementing the program multiplexing. Static multiplex scheme is to multiplex all the IPTV programs and forward them to the OLT, regardless of the need of end-users. While dynamic multiplex scheme can dynamically multiplex and forward IPTV programs according to what the end-users actually demand and those watched by no end-user would not be multiplexed. By comparing these two schemes, a reduced traffic of EPON can be achieved by using dynamic multiplex scheme, especially when most end-users are watching the same few IPTV programs. Both schemes are implemented in our system, with their hardware and software designs described.

EFFECTS OF EBT CUSTOMER SERVICE WAIVERS ON FOOD STAMP RECIPIENTS: EXECUTIVE SUMMARY

OpenAIRE

Kirlin, John A.; Logan, Christopher

2002-01-01

Most State agencies are now using electronic benefits transfer (EBT) systems to issue food stamp benefits. To promote operational efficiency, some States have received waivers of certain rules governing EBT use. An exploratory study was conducted to ascertain the effects of these waivers on food stamp recipients. The results show that two of the waivers-those allowing recipients to select their own personal identification numbers and to receive EBT training by mail rather than in person-cause...

Access to Investigational Drugs: FDA Expanded Access Programs or “Right‐to‐Try” Legislation?

Science.gov (United States)

Berglund, Jelena P.; Weatherwax, Kevin; Gerber, David E.; Adamo, Joan E.

2015-01-01

Abstract Purpose The Food and Drug Administration Expanded Access (EA) program and “Right‐to‐Try” legislation aim to provide seriously ill patients who have no other comparable treatment options to gain access to investigational drugs and biological agents. Physicians and institutions need to understand these programs to respond to questions and requests for access. Methods FDA EA programs and state and federal legislative efforts to provide investigational products to patients by circumventing FDA regulations were summarized and compared. Results The FDA EA program includes Single Patient‐Investigational New Drug (SP‐IND), Emergency SP‐IND, Intermediate Sized Population IND, and Treatment IND. Approval rates for all categories exceed 99%. Approval requires FDA and Institutional Review Board (IRB) approval, and cooperation of the pharmaceutical partner is essential. “Right‐to‐Try” legislation bypasses some of these steps, but provides no regulatory or safety oversight. Conclusion The FDA EA program is a reasonable option for patients for whom all other therapeutic interventions have failed. The SP‐IND not only provides patient access to new drugs, but also maintains a balance between immediacy and necessary patient protection. Rather than circumventing existing FDA regulations through proposed legislation, it seems more judicious to provide the knowledge and means to meet the EA requirements. PMID:25588691

Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithography

International Nuclear Information System (INIS)

Landis, S; Chaix, N; Gourgon, C; Perret, C; Leveder, T

2006-01-01

Sub-100 nm resolution on a 200 mm silicon stamp has been hot embossed into commercial Sumitomo NEB 22 resist. A single pattern, exposed with electron beam lithography, has been considered to define the stamp and thus make it possible to point out the impact of stamp design on the printing. These results may be considered as a first attempt to define rules to solve the proximity printing effects (PPEs). Moreover, a large range of initial resist thickness, from 56 to 506 nm, has been spin coated to assess the effect of polymer flow properties for the stamp cavity filling and the printed defects. A detailed analysis of the printed resist in dense hole patterns showed that the application volume conservation is enough to calculate the residual layer thickness as the height of the printed resist feature. Good accordance has been obtained between the theoretical approach and experimental results. Moreover, the impact of the pattern symmetry breakdown on mould deformation is clearly shown in this paper in the printed areas as well as in the unprinted areas

Stamping of Thin-Walled Structural Components with Magnesium Alloy AZ31 Sheets

International Nuclear Information System (INIS)

Chen, F.-K.; Chang, C.-K.

2005-01-01

In the present study, the stamping process for manufacturing cell phone cases with magnesium alloy AZ31 sheets was studied using both the experimental approach and the finite element analysis. In order to determine the proper forming temperature and set up a fracture criterion, tensile tests and forming limit tests were first conducted to obtain the mechanical behaviors of AZ31 sheets at various elevated temperatures. The mechanical properties of Z31 sheets obtained from the experiments were then adopted in the finite element analysis to investigate the effects of the process parameters on the formability of the stamping process of cell phone cases. The finite element simulation results revealed that both the fracture and wrinkle defects could not be eliminated at the same time by adjusting blank-holder force or blank size. A drawbead design was then performed using the finite element simulations to determine the size and the location of drawbead required to suppress the wrinkle defect. An optimum stamping process, including die geometry, forming temperature, and blank dimension, was then determined for manufacturing the cell phone cases. The finite element analysis was validated by the good agreement between the simulation results and the experimental data. It confirms that the cell phone cases can be produced with magnesium alloy AZ31 sheet by the stamping process at elevated temperatures

MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

Science.gov (United States)

Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

2014-01-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

Science.gov (United States)

Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

2013-12-01

It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

International Nuclear Information System (INIS)

Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

2012-01-01

We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

The development of accessibility indicators for distance learning programs

Directory of Open Access Journals (Sweden)

Sheryl Burgstahler

2006-12-01

Full Text Available A study was undertaken to explore program policies and practices related to the accessibility of American distance learning courses to qualified students with disabilities. A literature review was conducted, a draft list of accessibility indicators was created, examples of applications of the indicators in existing distance learning programs were collected, the indicators were systematically applied to one distance learning program, input from a variety of distance learning programs was used to further refine the indicators, and these programs were encouraged to adopt the indicators and make use of resources provided by the project. Results of this exploratory work suggest that incorporating accessibility considerations into policies, procedures and communications of a program requires consideration of the unique needs of students, course designers, instructors and evaluators; involves approval and implementation at a variety of administrative levels; and is an ongoing process that may be implemented in incremental steps.

49 CFR 238.119 - Rim-stamped straight-plate wheels.

Science.gov (United States)

2010-10-01

... input to the wheel during braking. (b) A rim-stamped straight-plate wheel shall not be used as a... that is periodically tread-braked for a short duration by automatic circuitry for the sole purpose of...

Imprints of the Neolithic mind – clay stamps from the Republic of Macedonia

Directory of Open Access Journals (Sweden)

Goce Naumov

2008-12-01

Full Text Available The presence and unusual structure of clay stamps found in Neolithic settlements often give rise to multiple interpretations to define their character. The small dimensions and specific shape of the stamps suggests that these portable objects were important in the social relations and visual communication between members within the same community and, possibly, more distant communities. The definite patterns distinguishe their function in maintaining the visual traditions of the populations inhabiting southeastern Europe. They had an important role in building the Neolithic image modularity, so that they fitted into the comprehensive decorative structure of Neolithic iconography, and the patterns present on the stamps are related to several aspects of Neolithic material culture from the Balkans and Anatolia. This homogeneity of patterns indicates that they were actively included in the transposition of cognition into visual metaphors.

Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

Science.gov (United States)

Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

2017-04-01

The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

Rubber stamp templates for improving clinical documentation: A paper-based, m-Health approach for quality improvement in low-resource settings.

Science.gov (United States)

Kleczka, Bernadette; Musiega, Anita; Rabut, Grace; Wekesa, Phoebe; Mwaniki, Paul; Marx, Michael; Kumar, Pratap

2018-06-01

The United Nations' Sustainable Development Goal #3.8 targets 'access to quality essential healthcare services'. Clinical practice guidelines are an important tool for ensuring quality of clinical care, but many challenges prevent their use in low-resource settings. Monitoring the use of guidelines relies on cumbersome clinical audits of paper records, and electronic systems face financial and other limitations. Here we describe a unique approach to generating digital data from paper using guideline-based templates, rubber stamps and mobile phones. The Guidelines Adherence in Slums Project targeted ten private sector primary healthcare clinics serving informal settlements in Nairobi, Kenya. Each clinic was provided with rubber stamp templates to support documentation and management of commonly encountered outpatient conditions. Participatory design methods were used to customize templates to the workflows and infrastructure of each clinic. Rubber stamps were used to print templates into paper charts, providing clinicians with checklists for use during consultations. Templates used bubble format data entry, which could be digitized from images taken on mobile phones. Besides rubber stamp templates, the intervention included booklets of guideline compilations, one Android phone for digitizing images of templates, and one data feedback/continuing medical education session per clinic each month. In this paper we focus on the effect of the intervention on documentation of three non-communicable diseases in one clinic. Seventy charts of patients enrolled in the chronic disease program (hypertension/diabetes, n=867; chronic respiratory diseases, n=223) at one of the ten intervention clinics were sampled. Documentation of each individual patient encounter in the pre-intervention (January-March 2016) and post-intervention period (May-July) was scored for information in four dimensions - general data, patient assessment, testing, and management. Control criteria included

75 FR 34941 - Review of the Commission's Program Access Rules and Examination of Programming Tying Arrangements

Science.gov (United States)

2010-06-21

... Commission's Program Access Rules and Examination of Programming Tying Arrangements AGENCY: Federal... Program Access Rules and Examination of Programming Tying Arrangements, MB Docket No. 07-198, FCC 10-17... information collection is contained in Sections 4(i), 303(r), and 628 of the Communications Act of 1934, as...

Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

Science.gov (United States)

Gundersen, Craig; Kreider, Brent

2008-01-01

Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

45 CFR 205.25 - Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities.

Science.gov (United States)

2010-10-01

... beneficiaries for food stamps or surplus commodities. 205.25 Section 205.25 Public Welfare Regulations Relating....25 Eligibility of supplemental security income beneficiaries for food stamps or surplus commodities... XVI of the Social Security Act, the State agency shall make the following determinations: (1) The...

The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

Directory of Open Access Journals (Sweden)

Kaadyr-ool A. Bicheldey

2016-09-01

Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2012-12-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

Directory of Open Access Journals (Sweden)

Tadas Limba

2013-02-01

Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

Programming and Technology for Accessibility in Geoscience

Science.gov (United States)

Sevre, E.; Lee, S.

2013-12-01

Many people, students and professors alike, shy away from learning to program because it is often believed to be something scary or unattainable. However, integration of programming into geoscience education can be a valuable tool for increasing the accessibility of content for all who are interested. It is my goal to dispel these myths and convince people that: 1) Students with disabilities can use programming to increase their role in the classroom, 2) Everyone can learn to write programs to simplify daily tasks, 3) With a deep understanding of the task, anyone can write a program to do a complex task, 4) Technology can be combined with programming to create an inclusive environment for all students of geoscience, and 5) More advanced knowledge of programming and technology can lead geoscientists to create software to serve as assistive technology in the classroom. It is my goal to share my experiences using technology to enhance the classroom experience as a way of addressing the aforementioned issues. Through my experience, I have found that programming skills can be included and learned by all to enhance the content of courses without detracting from curriculum. I hope that, through this knowledge, geoscience courses can become more accessible for people with disabilities by including programming and technology to the benefit of all involved.

JASPAR RESTful API: accessing JASPAR data from any programming language.

Science.gov (United States)

Khan, Aziz; Mathelier, Anthony

2018-05-01

JASPAR is a widely used open-access database of curated, non-redundant transcription factor binding profiles. Currently, data from JASPAR can be retrieved as flat files or by using programming language-specific interfaces. Here, we present a programming language-independent application programming interface (API) to access JASPAR data using the Representational State Transfer (REST) architecture. The REST API enables programmatic access to JASPAR by most programming languages and returns data in eight widely used formats. Several endpoints are available to access the data and an endpoint is available to infer the TF binding profile(s) likely bound by a given DNA binding domain protein sequence. Additionally, it provides an interactive browsable interface for bioinformatics tool developers. This REST API is implemented in Python using the Django REST Framework. It is accessible at http://jaspar.genereg.net/api/ and the source code is freely available at https://bitbucket.org/CBGR/jaspar under GPL v3 license. aziz.khan@ncmm.uio.no or anthony.mathelier@ncmm.uio.no. Supplementary data are available at Bioinformatics online.

Solid-state superionic stamping with silver iodide-silver metaphosphate glass

International Nuclear Information System (INIS)

Jacobs, K E; Hsu, K H; Han, X; Azeredo, B P; Ferreira, P M; Kumar, A; Fang, N X

2011-01-01

This paper demonstrates and analyzes the new use of the glassy solid electrolyte AgI-AgPO 3 for direct nanopatterning of thin silver films with feature resolutions of 30 nm. AgI-AgPO 3 has a high room temperature ionic conductivity with Ag + as the mobile ion, leading to silver etch/patterning rates of up to 20 nm s -1 at an applied bias of 300 mV. The glass can be melt-processed at temperatures below 200 deg. C, providing a facile and economical pathway for creating large area stamps, including the 25 mm 2 stamps shown in this study. Further, the glass is sufficiently transparent to permit integration with existing tools such as aligners and imprint tools, enabling high overlay registration accuracy and facilitating insertion into multi-step fabrication recipes.

Failure Mechanisms of the Protective Coatings for the Hot Stamping Applications

Science.gov (United States)

Zhao, Chen

In the present study, four different nitriding techniques were carried on the ductile irons NAAMS-D6510 and cast steels NAAMS-S0050A, which are widely used stamping die materials; duplex treatments (PVD CrN coating+nitriding) were carried on H13 steels, which are common inserts for the hot stamping dies. Inclined impact-sliding wear tests were performed on the nitriding cases under simulated stamping conditions. Surface profilometer, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to investigate the wear and failure mechanisms of the protective coatings. It was found that the nitrided ductile iron samples performed better than the nitrided cast steel specimens. High temperature inclined impact-sliding wear tests were carried out on the CrN coatings. It was found that the coating performed better at elevated temperature. XPS analysis indicated the top surface layer (about 3-4nm) of the coating was oxidized at 400 °C and formed a Cr2O3 protective film. The in-situ formation of the thin Cr2O3 protective layer likely led to the change of wear mechanisms from severe adhesive failure to mild abrasive wear.

Martensitic microstructural transformations from the hot stamping, quenching and partitioning process

International Nuclear Information System (INIS)

Liu Heping; Jin Xuejun; Dong Han; Shi Jie

2011-01-01

Hot stamping, which combines forming and quenching in one process, produces high strength steels with limited ductility because the quenching is uncontrolled. A new processing technique has been proposed in which the hot stamping step is followed by a controlled quenching and partitioning process, producing a microstructure containing retained austenite and martensite. To investigate this microstructure, specimens were heated at a rate of 10 deg. C/s to the austenitizing temperature of 900 deg. C, held for 5 min to eliminate thermal gradients, and cooled at a rate of 50 deg. C/s to a quenching temperature of 300 deg. C, which is between the martensite start temperature and the martensite finish temperatures. The resulting microstructure was examined using optical microscope, scanning electron microscopy and transmission electron microscopy. The material produced contains irregular, fragmented martensite plates, a result of the improved strength of the austenite phase and the constraints imposed by a high dislocation density. - Research Highlights: → A novel heat treatment of advanced high strength steels is proposed. → The processing technique is hot stamping plus quenching and partitioning process. → The material produced contains irregular, fragmented martensite plates. → The reason is strength of austenite phase and constraint of dislocation density.

Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao, Jian; Chen, Wei; Xia, Z. Cedric

2005-01-01

Sheet metal stamping processes have been widely implemented in many industries due to its repeatability and productivity. In general, the simulations for a sheet metal forming process involve nonlinearity, complex material behavior and tool-material interaction. Instabilities in terms of tearing and wrinkling are major concerns in many sheet metal stamping processes. In this work, a sheet metal stamping process of a mild steel for a wheelhouse used in automobile industry is studied by using an explicit nonlinear finite element code and incorporating failure analysis (tearing and wrinkling) and design under uncertainty. Margins of tearing and wrinkling are quantitatively defined via stress-based criteria for system-level design. The forming process utilizes drawbeads instead of using the blank holder force to restrain the blank. The main parameters of interest in this work are friction conditions, drawbead configurations, sheet metal properties, and numerical errors. A robust design model is created to conduct a probabilistic design, which is made possible for this complex engineering process via an efficient uncertainty propagation technique. The method called the weighted three-point-based method estimates the statistical characteristics (mean and variance) of the responses of interest (margins of failures), and provide a systematic approach in designing a sheet metal forming process under the framework of design under uncertainty

Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

Science.gov (United States)

Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

2015-01-01

Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

Development and introduction of stamping technique for large-size laterals of NPP pipelines

International Nuclear Information System (INIS)

Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

1984-01-01

The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

41 CFR 105-8.152 - Program accessibility: Assignment of space.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Program accessibility: Assignment of space. 105-8.152 Section 105-8.152 Public Contracts and Property Management Federal Property...-8.152 Program accessibility: Assignment of space. (a) When GSA assigns or reassigns space to an...

A framework for development of an intelligent system for design and manufacturing of stamping dies

International Nuclear Information System (INIS)

Hussein, H M A; Kumar, S

2014-01-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

A framework for development of an intelligent system for design and manufacturing of stamping dies

Science.gov (United States)

Hussein, H. M. A.; Kumar, S.

2014-07-01

An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

International Nuclear Information System (INIS)

Park, Jongho; Kim, Beomjoon

2016-01-01

Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

design and development of a soap stamping and tableting machine

African Journals Online (AJOL)

2012-07-02

Jul 2, 2012 ... for these two operations. The manual ... chine, the cutting and stamping operations were done at different .... slack side belt tensions Tj were determined as 131.66N and 162.71N for the .... vironmental Management, Vol. 6, No.

Ocean Drilling Program: Web Site Access Statistics

Science.gov (United States)

web site ODP/TAMU Science Operator Home Ocean Drilling Program Web Site Access Statistics* Overview See statistics for JOIDES members. See statistics for Janus database. 1997 October November December

Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

Science.gov (United States)

National Women's History Project, Windsor, CA.

This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates

Energy Technology Data Exchange (ETDEWEB)

Dundar, F. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Department of Materials Science and Engineering, Gebze Institute of Technology (Turkey); Dur, Ender; Koc, M. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); Mahabunphachai, S. [NSF I/UCRC Center for Precision Forming (CPF), Virginia Commonwealth University, Richmond, VA (United States); National Metal and Materials Technology Center (MTEC), Pathumthani (Thailand)

2010-06-01

Metallic bipolar plates have several advantages over bipolar plates made from graphite and composites due to their high conductivity, low material and production costs. Moreover, thin bipolar plates are possible with metallic alloys, and hence low fuel cell stack volume and mass are. Among existing fabrication methods for metallic bipolar plates, stamping and hydroforming are seen as prominent approaches for mass production scales. In this study, the effects of important process parameters of these manufacturing processes on the corrosion resistance of metallic bipolar plates made of SS304 were investigated. Specifically, the effects of punch speed, pressure rate, stamping force and hydroforming pressure were studied as they were considered to inevitably affect the bipolar plate micro-channel dimensions, surface topography, and hence the corrosion resistance. Corrosion resistance under real fuel cell conditions was examined using both potentiodynamic and potentiostatic experiments. The majority of the results exhibited a reduction in the corrosion resistance for both stamped and hydroformed plates when compared with non-deformed blank plates of SS304. In addition, it was observed that there exist an optimal process window for punch speed in stamping and the pressure rate in hydroforming to achieve improved corrosion resistance at a faster production rate. (author)

American Society of Mechanical Engineers' N stamp requirements

International Nuclear Information System (INIS)

Row, P.D.

1977-01-01

Incorporated with ASME Section III, Nuclear Power Plant Components, is an Appendix on Quality Assurance Systems which includes provision for ASME surveys. Manufacturers and installers passing the survey successfully receive an N Symbol Stamp and an ASME Certificate of Authorization. An outline is given of the prerequisites for a survey to be scheduled and of the requirements and procedures adopted by the survey team. (U.K.)

Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

Science.gov (United States)

Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

2018-03-01

22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

CERN Multimedia

Patrice Loiez

2004-01-01

'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

Characterization of the interfacial heat transfer coefficient for hot stamping processes

Science.gov (United States)

Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

2016-08-01

In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

Science.gov (United States)

2010-04-01

..., transfers, takes or gives in exchange, or pledges or gives in pledge, except as authorized in the Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

Environmental Research Division's Data Access Program (ERDDAP)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — ERDDAP (the Environmental Research Division's Data Access Program) is a data server that gives you a simple, consistent way to download subsets of scientific...

Decreasing dialysis catheter rates by creating a multidisciplinary dialysis access program.

Science.gov (United States)

Rosenberry, Patricia M; Niederhaus, Silke V; Schweitzer, Eugene J; Leeser, David B

2018-03-01

Centers for Medicare and Medicaid Services have determined that chronic dialysis units should have 45%. A multidisciplinary program was established with goals of decreasing catheter rates in order to decrease central line-associated bloodstream infections, decrease mortality associated with central line-associated bloodstream infection, decrease hospital days, and provide savings to the healthcare system. We collected the catheter rates within three dialysis centers served over a 5-year period. Using published data surrounding the incidence and related costs of central line-associated bloodstream infection and mortality per catheter day, the number of central line-associated bloodstream infection events, the costs, and the related mortality could be determined prior to and after the initiation of the dialysis access program. An organized dialysis access program resulted in a 82% decrease in the number of central venous catheter days which lead to a concurrent reduction in central line-associated bloodstream infection and deaths. As a result of creating an access program, central venous catheter rates decreased from an average rate of 45% to 8%. The cost savings related to the program was calculated to be over US$5 million. The decrease in the number of mortalities is estimated to be between 13 and 27 patients. We conclude that a formalized access program decreases catheter rates, central line-associated bloodstream infection, and the resultant hospitalizations, mortality, and costs. Areas with high hemodialysis catheter rates should develop access programs to better serve their patient population.

Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

Directory of Open Access Journals (Sweden)

M. Kumar

2017-01-01

Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

49 CFR 28.150 - Program accessibility: Existing facilities.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Program accessibility: Existing facilities. 28.150 Section 28.150 Transportation Office of the Secretary of Transportation ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE DEPARTMENT OF TRANSPORTATION § 28...

Technological Innovation and Cooperation for Foreign Information Access Program

Science.gov (United States)

Office of Postsecondary Education, US Department of Education, 2012

2012-01-01

The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

Nanostructured submicron block copolymer dots by sacrificial stamping: a potential preconcentration platform for locally resolved sensing, chemistry and cellular interactions

OpenAIRE

Hou, Peilong; Han, Weijia; Philippi, Michael; Schäfer, Helmut; Steinhart, Martin

2018-01-01

Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto silicon wafers and glass slides. The sacrificial PS-b-P2VP stamps were topographically patterned w...

Size Effect Studies on Tensile Tests for Hot Stamping Steel

Science.gov (United States)

Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

2018-02-01

Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

Experimental Validation for Hot Stamping Process by Using Taguchi Method

Science.gov (United States)

Fawzi Zamri, Mohd; Lim, Syh Kai; Razlan Yusoff, Ahmad

2016-02-01

Due to the demand for reduction in gas emissions, energy saving and producing safer vehicles has driven the development of Ultra High Strength Steel (UHSS) material. To strengthen UHSS material such as boron steel, it needed to undergo a process of hot stamping for heating at certain temperature and time. In this paper, Taguchi method is applied to determine the appropriate parameter of thickness, heating temperature and heating time to achieve optimum strength of boron steel. The experiment is conducted by using flat square shape of hot stamping tool with tensile dog bone as a blank product. Then, the value of tensile strength and hardness is measured as response. The results showed that the lower thickness, higher heating temperature and heating time give the higher strength and hardness for the final product. In conclusion, boron steel blank are able to achieve up to 1200 MPa tensile strength and 650 HV of hardness.

76 FR 2686 - Video Programming and Emergency Access Advisory Committee; Announcement of Establishment and...

Science.gov (United States)

2011-01-14

... FEDERAL COMMUNICATIONS COMMISSION [DA 10-2320] Video Programming and Emergency Access Advisory... appointment of members of the Video Programming and Emergency Access Advisory Committee (``Committee'' or... change of the Committee's popular name to the Video Programming Accessibility Advisory Committee (``VPAAC...

12 CFR 410.150 - Program accessibility: Existing facilities.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Program accessibility: Existing facilities. 410.150 Section 410.150 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY EXPORT-IMPORT BANK OF THE UNITED...

12 CFR 410.149 - Program accessibility: Discrimination prohibited.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Program accessibility: Discrimination prohibited. 410.149 Section 410.149 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY EXPORT-IMPORT BANK OF THE UNITED...

77 FR 6113 - Video Programming and Accessibility Advisory Committee; Announcement of Date of Next Meeting

Science.gov (United States)

2012-02-07

... FEDERAL COMMUNICATIONS COMMISSION [DA 12-15] Video Programming and Accessibility Advisory.... SUMMARY: This document announces the next meeting of the Video Programming Accessibility Advisory... Commission regarding the provision of video description, access to emergency programming, and access to user...

Stamping, Clapping and Chanting: An Ancient Learning Pathway?

Directory of Open Access Journals (Sweden)

Marion M. Long

2006-04-01

Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models

Science.gov (United States)

Samadian, P.; Parsa, M. H.; Mirzadeh, H.

2015-02-01

Nowadays, the application of kinetics models for predicting microstructures of steels subjected to thermo-mechanical treatments has increased to minimize direct experimentation, which is costly and time consuming. In the current work, the final microstructures of AISI 4140 steel sheets after the hot stamping process were predicted using the Kirkaldy and Li kinetics models combined with new thermodynamically based models in order for the determination of the appropriate process temperatures. In this way, the effect of deformation during hot stamping on the Ae3, Acm, and Ae1 temperatures was considered, and then the equilibrium volume fractions of phases at different temperatures were calculated. Moreover, the ferrite transformation rate equations of the Kirkaldy and Li models were modified by a term proposed by Åkerström to consider the influence of plastic deformation. Results showed that the modified Kirkaldy model is satisfactory for the determination of appropriate austenitization temperatures for the hot stamping process of AISI 4140 steel sheets because of agreeable microstructure predictions in comparison with the experimental observations.

Time stamp technique using a nuclear emulsion multi-stage shifter for gamma-ray telescope

International Nuclear Information System (INIS)

Takahashi, Satoru; Aoki, Shigeki; Rokujo, Hiroki; Hamada, Kaname; Komatsu, Masahiro; Morishima, Kunihiro; Nakamura, Mitsuhiro; Nakano, Toshiyuki; Niwa, Kimio; Sato, Osamu; Yoshioka, Teppei; Kodama, Koichi

2010-01-01

Nuclear emulsion has a potential use as a gamma-ray telescope with high angular resolution. For this application it is necessary to know the time when each track was recorded in the emulsion. In previous experiments using nuclear emulsion, various efforts were used to associate time to nuclear emulsion tracks and to improve the time resolution. Using a high speed readout system for nuclear emulsion together with a clock-based multi-stage emulsion shifter, we invented a technique to give a time-stamp to emulsion tracks and greatly improve the time resolution. A test experiment with a 2-stage shifter was used to demonstrate the principle of multi-stage shifting, and we achieved a time resolution 1.5 s for 12.1 h (about 1 part in 29 000) with the time stamp reliability 97% and the time stamp efficiency 98%. This multi-stage shifter can achieve the time resolution required for a gamma-ray telescope and can also be applied to another cosmic ray observations and accelerator experiments using nuclear emulsion.

7 CFR 272.5 - Program informational activities.

Science.gov (United States)

2010-01-01

... creed, national origin or political belief. (c) Program informational activities for low-income..., application procedures, and benefits of the Food Stamp Program. Program informational materials used in such... the socio-economic and demographic characteristics of the target population, types of media used...

Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

International Nuclear Information System (INIS)

Zhang Fengxiang; Low, Hong Yee

2008-01-01

Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

Stochastic analysis and robust optimization for a deck lid inner panel stamping

International Nuclear Information System (INIS)

Hou, Bo; Wang, Wurong; Li, Shuhui; Lin, Zhongqin; Xia, Z. Cedric

2010-01-01

FE-simulation and optimization are widely used in the stamping process to improve design quality and shorten development cycle. However, the current simulation and optimization may lead to non-robust results due to not considering the variation of material and process parameters. In this study, a novel stochastic analysis and robust optimization approach is proposed to improve the stamping robustness, where the uncertainties are involved to reflect manufacturing reality. A meta-model based stochastic analysis method is developed, where FE-simulation, uniform design and response surface methodology (RSM) are used to construct meta-model, based on which Monte-Carlo simulation is performed to predict the influence of input parameters variation on the final product quality. By applying the stochastic analysis, uniform design and RSM, the mean and the standard deviation (SD) of product quality are calculated as functions of the controllable process parameters. The robust optimization model composed of mean and SD is constructed and solved, the result of which is compared with the deterministic one to show its advantages. It is demonstrated that the product quality variations are reduced significantly, and quality targets (reject rate) are achieved under the robust optimal solution. The developed approach offers rapid and reliable results for engineers to deal with potential stamping problems during the early phase of product and tooling design, saving more time and resources.

Causal Analysis to a Subway Accident: A Comparison of STAMP and RAIB

Directory of Open Access Journals (Sweden)

Zhou Yao

2018-01-01

Full Text Available Accident investigation and analysis after the accident, vital to prevent the occurrence of similar accident and improve the safety of the system. Different methods led to a different understanding of the accident. In this paper, a subway accident was analysed with a systemic accident analysis model – STAMP (System-Theoretic Accident Modelling and Processes. The hierarchical safety control structure was obtained, and the system-level safety constraints were obtained, controllers of the physical layer were analysed one by one, and put forward the relevant safety requirements and constraints, the dynamic analysis of the structure of the safety control is carried out, and the targeted recommendations are pointed out. In comparison with the analysis results obtained by the Rail Accident Investigation Branch (RAIB. Some useful findings have been concluded. STAMP treats safety as a control problem and reduces or eliminates causes of the accident from the controlling perspective. Whereas RAIB obtains causes of the accident by analysing the sequence of events related to the accident and reasons of these events, then chooses one(or moreevent(s as the immediate cause and some of the key events as causal factors. RAIB analysis is based on the sequential event models, but STAMP analysis provides us with a holistic, dynamic way to control system to maintain safety.

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

International Nuclear Information System (INIS)

Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

2015-01-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

Energy Technology Data Exchange (ETDEWEB)

Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

2015-07-01

This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

Directory of Open Access Journals (Sweden)

Aizawa Tatsuhiko

2016-01-01

Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

International Nuclear Information System (INIS)

Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

2007-01-01

It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

77 FR 24301 - Revision of the Commission's Program Access Rules

Science.gov (United States)

2012-04-23

... afforded to multichannel video programming distributors by the program access rules--the prohibition on exclusive contracts involving satellite- delivered, cable-affiliated programming. The current exclusive... sections 4(i), 303(r), 616, and 628 of the Communications Act of 1934, as amended. Total Annual Burden: 43...

Stellar Atmospheric Modelling for the ACCESS Program

Science.gov (United States)

Morris, Matthew; Kaiser, Mary Elizabeth; Bohlin, Ralph; Kurucz, Robert; ACCESS Team

2018-01-01

A goal of the ACCESS program (Absolute Color Calibration Experiment for Standard Stars) is to enable greater discrimination between theoretical astrophysical models and observations, where the comparison is limited by systematic errors associated with the relative flux calibration of the targets. To achieve these goals, ACCESS has been designed as a sub-orbital rocket borne payload and ground calibration program, to establish absolute flux calibration of stellar targets at flight candidates, as well as a selection of A and G stars from the CALSPEC database. Stellar atmosphere models were generated using Atlas 9 and Atlas 12 Kurucz stellar atmosphere software. The effective temperature, log(g), metallicity, and redenning were varied and the chi-squared statistic was minimized to obtain a best-fit model. A comparison of these models and the results from interpolation between grids of existing models will be presented. The impact of the flexibility of the Atlas 12 input parameters (e.g. solar metallicity fraction, abundances, microturbulent velocity) is being explored.

76 FR 21741 - Twenty-First Century Communications and Video Programming Accessibility Act; Announcement of Town...

Science.gov (United States)

2011-04-18

... equipment distribution program for people who are deaf-blind. In addition, the law will fill accessibility... Programming Accessibility Act; Announcement of Town Hall Meeting AGENCY: Federal Communications Commission... The Twenty-First Century Communications and Video Programming Accessibility Act (the Act or CVAA...

Disruption of Ttll5/stamp gene (tubulin tyrosine ligase-like protein 5/SRC-1 and TIF2-associated modulatory protein gene) in male mice causes sperm malformation and infertility.

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S; Guo, Chunhua; Blackford, John A; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P; London, Edra C; Chen, Weiping; Dean, Jurrien; Simons, S Stoney

2013-05-24

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamp(tm/tm)) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamp(tm/tm) sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamp(tm/tm) males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility.

Studying the Solar System Can Be More than Just "Stamp Collecting"

Science.gov (United States)

LoPresto, Michael C.

2017-01-01

While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

47 CFR 76.1507 - Competitive access to satellite cable programming.

Science.gov (United States)

2010-10-01

... programming. 76.1507 Section 76.1507 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST... access to satellite cable programming. (a) Any provision that applies to a cable operator under §§ 76... provides video programming on its open video system, except as limited by paragraph (a) (1)-(3) of this...

STAMPS: development and verification of swallowing kinematic analysis software.

Science.gov (United States)

Lee, Woo Hyung; Chun, Changmook; Seo, Han Gil; Lee, Seung Hak; Oh, Byung-Mo

2017-10-17

Swallowing impairment is a common complication in various geriatric and neurodegenerative diseases. Swallowing kinematic analysis is essential to quantitatively evaluate the swallowing motion of the oropharyngeal structures. This study aims to develop a novel swallowing kinematic analysis software, called spatio-temporal analyzer for motion and physiologic study (STAMPS), and verify its validity and reliability. STAMPS was developed in MATLAB, which is one of the most popular platforms for biomedical analysis. This software was constructed to acquire, process, and analyze the data of swallowing motion. The target of swallowing structures includes bony structures (hyoid bone, mandible, maxilla, and cervical vertebral bodies), cartilages (epiglottis and arytenoid), soft tissues (larynx and upper esophageal sphincter), and food bolus. Numerous functions are available for the spatiotemporal parameters of the swallowing structures. Testing for validity and reliability was performed in 10 dysphagia patients with diverse etiologies and using the instrumental swallowing model which was designed to mimic the motion of the hyoid bone and the epiglottis. The intra- and inter-rater reliability tests showed excellent agreement for displacement and moderate to excellent agreement for velocity. The Pearson correlation coefficients between the measured and instrumental reference values were nearly 1.00 (P software is expected to be useful for researchers who are interested in the swallowing motion analysis.

Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

International Nuclear Information System (INIS)

Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

2007-01-01

Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

Directory of Open Access Journals (Sweden)

Orłowicz A.W.

2016-06-01

Full Text Available The paper presents results of assessment of the unit pressure force within the refractory material volume in the course press-moulding of stampings for refractory precast shapes. The force was evaluated with the use of physical simulation of deformation undergone by lead balls placed in the raw refractory mass subjected to pressing in a metal die. To determine the value of unit pressure force applied to the aggregate grains in the course of stamping press-moulding, physical model of deformation of a sphere induced by the uniaxial stress state was used.

Object oriented programming techniques applied to device access and control

International Nuclear Information System (INIS)

Goetz, A.; Klotz, W.D.; Meyer, J.

1992-01-01

In this paper a model, called the device server model, has been presented for solving the problem of device access and control faced by all control systems. Object Oriented Programming techniques were used to achieve a powerful yet flexible solution. The model provides a solution to the problem which hides device dependancies. It defines a software framework which has to be respected by implementors of device classes - this is very useful for developing groupware. The decision to implement remote access in the root class means that device servers can be easily integrated in a distributed control system. A lot of the advantages and features of the device server model are due to the adoption of OOP techniques. The main conclusion that can be drawn from this paper is that 1. the device access and control problem is adapted to being solved with OOP techniques, 2. OOP techniques offer a distinct advantage over traditional programming techniques for solving the device access problem. (J.P.N.)

Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

NARCIS (Netherlands)

Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

2007-01-01

The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

76 FR 57989 - Video Programming and Accessibility Advisory Committee; Announcement of Date of Next Meeting

Science.gov (United States)

2011-09-19

... FEDERAL COMMUNICATIONS COMMISSION [DA 11-1527] Video Programming and Accessibility Advisory.... SUMMARY: This document announces the next meeting of the Video Programming Accessibility Advisory... programming, and the interoperability and user interface of the equipment used to deliver video programming...

47 CFR 76.1004 - Applicability of program access rules to common carriers and affiliates.

Science.gov (United States)

2010-10-01

... Cable Programming § 76.1004 Applicability of program access rules to common carriers and affiliates. (a... 47 Telecommunication 4 2010-10-01 2010-10-01 false Applicability of program access rules to common carriers and affiliates. 76.1004 Section 76.1004 Telecommunication FEDERAL COMMUNICATIONS COMMISSION...

Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

International Nuclear Information System (INIS)

Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

2014-01-01

With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

34 CFR 395.12 - Access to program and financial information.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Access to program and financial information. 395.12... information. Each blind vendor under this part shall be provided access to all financial data of the State... annual financial reports, provided that such disclosure does not violate applicable Federal or State laws...

A burial with a stamp seal depicting a Bes-like figure from Abusir

Czech Academy of Sciences Publication Activity Database

Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

2015-01-01

Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

Hand Society and Matching Program Web Sites Provide Poor Access to Information Regarding Hand Surgery Fellowship.

Science.gov (United States)

Hinds, Richard M; Klifto, Christopher S; Naik, Amish A; Sapienza, Anthony; Capo, John T

2016-08-01

The Internet is a common resource for applicants of hand surgery fellowships, however, the quality and accessibility of fellowship online information is unknown. The objectives of this study were to evaluate the accessibility of hand surgery fellowship Web sites and to assess the quality of information provided via program Web sites. Hand fellowship Web site accessibility was evaluated by reviewing the American Society for Surgery of the Hand (ASSH) on November 16, 2014 and the National Resident Matching Program (NRMP) fellowship directories on February 12, 2015, and performing an independent Google search on November 25, 2014. Accessible Web sites were then assessed for quality of the presented information. A total of 81 programs were identified with the ASSH directory featuring direct links to 32% of program Web sites and the NRMP directory directly linking to 0%. A Google search yielded direct links to 86% of program Web sites. The quality of presented information varied greatly among the 72 accessible Web sites. Program description (100%), fellowship application requirements (97%), program contact email address (85%), and research requirements (75%) were the most commonly presented components of fellowship information. Hand fellowship program Web sites can be accessed from the ASSH directory and, to a lesser extent, the NRMP directory. However, a Google search is the most reliable method to access online fellowship information. Of assessable programs, all featured a program description though the quality of the remaining information was variable. Hand surgery fellowship applicants may face some difficulties when attempting to gather program information online. Future efforts should focus on improving the accessibility and content quality on hand surgery fellowship program Web sites.

75 FR 9691 - Review of the Commission's Program Access Rules and Examination of Programming Tying Arrangements

Science.gov (United States)

2010-03-03

... involving programming they own, that impede competition in the video distribution market. See H.R. Rep. No... availability of programming and charging discriminatory prices to non- cable technologies.'' H.R. Rep. No. 102... Access Rules and Examination of Programming Tying Arrangements; Final Rule #0;#0;Federal Register / Vol...

Understanding the tariff. Access to the public power transportation network

International Nuclear Information System (INIS)

2002-01-01

Since the European directive of December 19, 1996 about the common rules of the European power market, the eligible companies can chose their power supplier anywhere in Europe. The manager of the French power transportation network (RTE) supplies a network access to these companies according to a tariff fixed by the decree no. 2002-1014 from July 19, 2002. The aim of this document is to explain this tariff: tariffing principles ('mail-stamp' principle, voltage domain, subscribed output power tariffs, input power tariffs), tariffing elements (access to the grid, elements of output tariffs (subscribed power, overload, emergency tariffs, modifications etc..)), invoicing modalities, output tariffs, definitions. (J.S.)

Access to Employee Wellness Programs and Use of Preventive Care Services Among U.S. Adults.

Science.gov (United States)

Isehunwa, Oluwaseyi O; Carlton, Erik L; Wang, Yang; Jiang, Yu; Kedia, Satish; Chang, Cyril F; Fijabi, Daniel; Bhuyan, Soumitra S

2017-12-01

There is little research at the national level on access to employee wellness programs and the use of preventive care services. This study examined the use of seven preventive care services among U.S working adults with access to employee wellness programs. The study population comprised 17,699 working adults aged ≥18 years, obtained from the 2015 National Health Interview Survey. Multivariate logistic regression models examined the relationship between access to employee wellness programs and use of seven preventive care services: influenza vaccination, blood pressure check, diabetes check, cholesterol check, Pap smear test, mammogram, and colon cancer screening. Data analysis began in Fall 2016. Overall, 46.6% of working adults reported having access to employee wellness programs in 2015. Working adults with access to employee wellness programs had higher odds of receiving influenza vaccination (OR=1.57, 95% CI=1.43, 1.72, pemployee wellness programs and the use of Pap smear test and colon cancer screening services. Using a nationally representative sample of individuals, this study found a positive association between access to employee wellness programs and the use of preventive care services. The results support favorable policies to encourage implementing wellness programs in all worksites, especially those with employees. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

76 FR 37766 - Submission for OMB Review; Comment Request

Science.gov (United States)

2011-06-28

... nutrition education and training materials known as the Resource Finder Database. SNAP-Ed providers access.... Agricultural Research Service Title: Supplemental Nutrition Assistance Program Connection Resource Sharing Form... Supplemental Nutrition Assistance Program (SNAP) and the Food Stamp Nutrition Connection became the SNAP-ED...

19 CFR 201.149 - Program accessibility: Discrimination prohibited.

Science.gov (United States)

2010-04-01

.... 201.149 Section 201.149 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF... Conducted by the U.S. International Trade Commission § 201.149 Program accessibility: Discrimination... agency's facilities are inaccessible to or unusable by handicapped persons, be denied the benefits of, be...

Evaluation of the content and accessibility of microsurgery fellowship program websites.

Science.gov (United States)

Silvestre, Jason; Vargas, Christina R; Ho, Olivia; Lee, Bernard T

2015-10-01

Microsurgery fellowship applicants utilize Internet-based resources such as the San Francisco Match (SF Match) to manage their applications. In deciding where to apply, applicants rely on advice from mentors and online resources including microsurgery fellowship websites (MFWs). The purpose of this study was to evaluate the content and accessibility of MFWs. While microsurgery is practiced by many surgical specialties, this study focused on MFWs for programs available in the 2014 Microsurgery Fellowship Match. Program lists from the American Society for Reconstructive Microsurgery (ASRM) and the San Francisco Match (SF Match) were analyzed for the accessibility of MFW links. MFWs were evaluated for education and recruitment content, and MFW comprehensiveness was compared on the basis of program characteristics using chi square tests. Of the 25 fellowships available, only 18 had websites (72%). SF Match and ASRM listed similar programs (96% overlap) and provided website links (89%, 76%), but only a minority connected directly to the MFW (38%, 23%). A minority of programs were responsive via email inquiry (36%). MFWs maintained minimal education and recruitment content. MFW comprehensiveness was not associated with program characteristics. MFWs are often not readily accessible and contain limited information for fellowship applicants. Given the relative low-cost of website development, MFWs may be improved to facilitate fellow recruitment. © 2015 Wiley Periodicals, Inc.

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

Science.gov (United States)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

49 CFR 28.151 - Program accessibility: New construction and alterations.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Program accessibility: New construction and alterations. 28.151 Section 28.151 Transportation Office of the Secretary of Transportation ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE DEPARTMENT OF TRANSPORTATION...

28 CFR 513.43 - Inmate access to certain Bureau Program Statements.

Science.gov (United States)

2010-07-01

... Statements. 513.43 Section 513.43 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE GENERAL... simple local access procedures described in this section to review certain Bureau Program Statements... 28 CFR), local access is available through the institution law library. (b) For a current Bureau...

Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

International Nuclear Information System (INIS)

Veit, R.; Kolleck, R.; Hofmann, H.; Sikora, S.

2011-01-01

Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating.In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

Studies on the finite element simulation in sheet metal stamping processes

Science.gov (United States)

Huang, Ying

The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

Professional Access 2013 programming

CERN Document Server

Hennig, Teresa; Hepworth, George; Yudovich, Dagi (Doug)

2013-01-01

Authoritative and comprehensive coverage for building Access 2013 Solutions Access, the most popular database system in the world, just opened a new frontier in the Cloud. Access 2013 provides significant new features for building robust line-of-business solutions for web, client and integrated environments.  This book was written by a team of Microsoft Access MVPs, with consulting and editing by Access experts, MVPs and members of the Microsoft Access team. It gives you the information and examples to expand your areas of expertise and immediately start to develop and upgrade projects. Exp

12 CFR 410.151 - Program accessibility: New construction and alterations.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Program accessibility: New construction and alterations. 410.151 Section 410.151 Banks and Banking EXPORT-IMPORT BANK OF THE UNITED STATES ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY EXPORT-IMPORT BANK OF THE UNITED...

Spanish-Language Community-Based Mental Health Treatment Programs, Policy-Required Language-Assistance Programming, and Mental Health Treatment Access Among Spanish-Speaking Clients

Science.gov (United States)

McClellan, Sean R.

2013-01-01

Objectives. We investigated the extent to which implementing language assistance programming through contracting with community-based organizations improved the accessibility of mental health care under Medi-Cal (California’s Medicaid program) for Spanish-speaking persons with limited English proficiency, and whether it reduced language-based treatment access disparities. Methods. Using a time series nonequivalent control group design, we studied county-level penetration of language assistance programming over 10 years (1997–2006) for Spanish-speaking persons with limited English proficiency covered under Medi-Cal. We used linear regression with county fixed effects to control for ongoing trends and other influences. Results. When county mental health plans contracted with community-based organizations, those implementing language assistance programming increased penetration rates of Spanish-language mental health services under Medi-Cal more than other plans (0.28 percentage points, a 25% increase on average; P language-related disparities. Conclusions. Mental health treatment programs operated by community-based organizations may have moderately improved access after implementing required language assistance programming, but the programming did not reduce entrenched disparities in the accessibility of mental health services. PMID:23865663

Spanish-language community-based mental health treatment programs, policy-required language-assistance programming, and mental health treatment access among Spanish-speaking clients.

Science.gov (United States)

Snowden, Lonnie R; McClellan, Sean R

2013-09-01

We investigated the extent to which implementing language assistance programming through contracting with community-based organizations improved the accessibility of mental health care under Medi-Cal (California's Medicaid program) for Spanish-speaking persons with limited English proficiency, and whether it reduced language-based treatment access disparities. Using a time series nonequivalent control group design, we studied county-level penetration of language assistance programming over 10 years (1997-2006) for Spanish-speaking persons with limited English proficiency covered under Medi-Cal. We used linear regression with county fixed effects to control for ongoing trends and other influences. When county mental health plans contracted with community-based organizations, those implementing language assistance programming increased penetration rates of Spanish-language mental health services under Medi-Cal more than other plans (0.28 percentage points, a 25% increase on average; P language-related disparities. Mental health treatment programs operated by community-based organizations may have moderately improved access after implementing required language assistance programming, but the programming did not reduce entrenched disparities in the accessibility of mental health services.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-04-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Investigation of Hardness Change for Spot Welded Tailored Blank in Hot Stamping Using CCT and Deformation-CCT Diagrams

Science.gov (United States)

Yogo, Yasuhiro; Kurato, Nozomi; Iwata, Noritoshi

2018-06-01

When an outer panel of a B-pillar is manufactured with the hot stamping process, reinforcements are spot welded on its inner side. Before reinforcements are added, the microstructure of the outer panel is martensite. However, reheating during spot welding changes the martensite to ferrite, which has a lower hardness in the heat-affected zone than in other areas. If spot welding is conducted before hot stamping for making a spot welded tailored blank, the microstructure in the spot welded tailored blank after hot stamping is martensite. This sequence of processes avoids hardness reduction due to spot welding. In this study, the hardness and microstructure around spot welded parts of the tailored blank were investigated. The results clearly showed that areas close to the spot welded parts are severely stretched during hot stamping. In addition, stretching suppresses the martensitic phase transformation and reduces the hardness. To characterize this phenomenon, a simulation was conducted that considered the effects of pre-strain on the phase transformation. A continuous cooling transformation (CCT) diagram and a deformation continuous cooling transformation (DCCT) diagram were made in order to quantify the effect of the cooling rate and pre-strain on the phase transformation and hardness. The hardness was then calculated using the experimentally measured CCT and DCCT diagrams and the finite element analysis results. The calculated hardness was compared with the experimental hardness. Good agreement was found between the calculated and experimental results.

Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms

Science.gov (United States)

Dufour, Clément; Wang, Peng; Boussu, François; Soulat, Damien

2014-10-01

Forming of continuous fibre reinforcements and thermoplastic resin commingled prepregs can be performed at room temperature due to its similar textile structure. The "cool" forming stage is better controlled and more economical. The increase of temperature and the resin consolidation phases after the forming can be carried out under the isothermal condition thanks to a closed system. It can avoid the manufacturing defects easily experienced in the non-isothermal thermoforming, in particular the wrinkling [1]. Glass/Polypropylene commingled yarns have been woven inside different three-dimensional (3D) warp interlock fabrics and then formed using a double-curved shape stamping tool. The present study investigates the in-plane and through-thickness behaviour of the 3D warp interlock fibrous reinforcements during forming with a hemispherical punch. Experimental data allow analysing the forming behaviour in the warp and weft directions and on the influence of warp interlock architectures. The results point out that the layer to layer warp interlock preform has a better stamping behaviour, in particular no forming defects and good homogeneity in thickness.

The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

Science.gov (United States)

Shao, Z.; Li, N.; Lin, J.

2017-09-01

The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

Ben Franklin, America’s Postage Stamp Star — on the Wane?

Directory of Open Access Journals (Sweden)

François Brunet

2010-01-01

Full Text Available This paper is an assessment of Ben Franklin’s evolving figure in U.S. postage stamps, focusing especially on the contrast between the 2006 tercentennial Franklin 4-stamp panel, a rather high-brow representation of Franklin as an intellectual, and his traditional image as a homely, common face. The singular history of U.S. postage stamps, with their innovative choice of historical figures as subject matter and their broader emphasis on commemoration, is briefly summarized. The evolution of the Franklin figure — the most common postal image, along with George Washington — is then detailed, showing how the traditional image prevailed until the 1950s, before being progressively displaced by a more cultural and, lately, intellectual image of the nation’s “electrizer”.Cet article vise à interpréter l’évolution de la figure de Benjamin Franklin dans les timbres-poste des Etats-Unis, en se fondant notamment sur le contraste entre le bloc de quatre timbres émis lors du tricentenaire en 2006, qui représente Franklin dans les différents métiers d’un intellectuel des Lumières, et son image traditionnelle d’Américain simple et moyen. On retrace tout d’abord l’histoire singulière des timbres américains, caractérisée par le choix innovant de figures historiques comme sujets et plus généralement par la prééminence de la fonction commémorative. Puis on étudie en détail l’évolution de la figure de Franklin — sujet le plus fréquent des timbres américains avec George Washington — en montrant que l’image traditionnelle s’est perpétuée jusqu’aux années 1950, avant de céder progressivement à une image plus culturelle et, récemment, plus intellectuelle.

Influence of temperature and friction on the 22MnB5 formability under hot stamping conditions

Science.gov (United States)

Venturato, G.; Ghiotti, A.; Bruschi, S.

2018-05-01

The need to increase the safety and decrease the weight of the car body-in-white has determined the success of the direct hot stamping process as a primary technology for the automotive sector. Thanks to this process, parts with high strength-to-weight ratio can be obtained along with high stiffness and increase of the crashworthiness properties. Moreover, the thinner metal sheets used to manufacture the pieces lead to a decrease of the total weight of the car body-in-white, with a consequent reduction of the CO2 emissions. The direct hot stamping process is becoming the key to obtain pieces with high mechanical properties, thanks to the quenching stage that allows the manufacture of complex shapes characterized by a fully martensitic structure, thanks to the forming stage at elevated temperature and subsequent hardening inside the cooled dies. The aim of this paper is the investigation of the influence that the forming temperature may have on the formability of 22MnB5 steel sheets, commonly used in the hot stamping process of automotive components. Nakajima tests were carried out at different temperatures and the Forming Limit Diagrams (FLDs) at rupture were obtained and analysed. The temperature influenced both the major and the minor strain at which the sheet failed, indicating that not only the formability increased at increasing temperature, but there was also a modification of the strain path, which means a modification of the strain states through which the part passes during the deformation process. Moreover, the influence of friction is studied using a model developed in the LS-Dyna FEM environment. The obtained data are of great importance for an accurate calibration of Finite Element (FE) models of the hot stamping of real components in order to get optimal process parameters to obtain defects-free pieces.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

OpenAIRE

Pasquale Russo Spena

2017-01-01

This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

Tribological behavior of a new green industrial lubricant for stamping operations - Application to Stainless Steels

Science.gov (United States)

Buteri, A.; Borgeot, M.; Roizard, X.; Lallemand, F.; Melot, J.-M.; Morand, L.

2016-11-01

Thanks to a fruitful collaboration between different academic and industrial research entities, a new green lubricant solution AFULudine has been developed for stamping operations in substitution to the usual mineral oils, with the idea and the wish to combine different essential properties such as a low environmental impact and ease-of-use according to the market needs and the more and more restrictive environmental legislation (e.g. REACH). Based on the Self-Assembled-Monolayer (SAM) principle and so, on a perfect control of the chemical reaction between the solution and the substrate (grafting of molecules onto the surface), AFULudine offers an efficient technical answer for improving stamping processes. The present study, focused on stainless steel stampings (comparison between a 441-1.4509 grade and a 304-1.4301 grade), investigates the performances of this new green industrial lubricant at different levels: from laboratory tests to industrial conditions through the production of hundreds of parts. Additional results coming from tests made on a rotational pin- on-disk tribometer will allow us to appreciate and retrieve more local information about the tribofilm creation during sliding. Moreover, the comparison with different mineral oils currently used at industrial scale, will strengthen the AFULudine performances. Indeed, this new solution usually outperforms a majority of such oils whatever their viscosity and their own composition: formulation, content of extreme pressure additives (Cl, S, P)...

Access to special education for exceptional students in French immersion programs: An equity issue

Directory of Open Access Journals (Sweden)

Nancy Wise

2011-06-01

Full Text Available Abstract Exceptional pupils enrolled in Canadian French immersion programs rarely have access to the same range of special education programs and services that are available to students in the regular English program. More often than not, students with special needs are encouraged to transfer to English programs to access necessary support services. This counselling-out process perpetuates the elitist status commonly attributed to French immersion programs. From a critical pedagogy perspective, this inquiry examines the lack of incentive on the part of multiple French immersion stakeholders to accommodate students with special needs. It further attempts to unveil the myths created by these stakeholders to better understand this discriminatory educational practice. The impact of federal and provincial funding models on access to special education programs and services is discussed, and the application of funding allocations by English-language district school boards is explored. The inquiry concludes with recommendations to promote more inclusionary practices.

Very Low-Cost Nutritious Diet Plans Designed by Linear Programming.

Science.gov (United States)

Foytik, Jerry

1981-01-01

Provides procedural details of Linear Programing, developed by the U.S. Department of Agriculture to devise a dietary guide for consumers that minimizes food costs without sacrificing nutritional quality. Compares Linear Programming with the Thrifty Food Plan, which has been a basis for allocating coupons under the Food Stamp Program. (CS)

Disruption of Ttll5/Stamp Gene (Tubulin Tyrosine Ligase-like Protein 5/SRC-1 and TIF2-associated Modulatory Protein Gene) in Male Mice Causes Sperm Malformation and Infertility*

Science.gov (United States)

Lee, Geun-Shik; He, Yuanzheng; Dougherty, Edward J.; Jimenez-Movilla, Maria; Avella, Matteo; Grullon, Sean; Sharlin, David S.; Guo, Chunhua; Blackford, John A.; Awasthi, Smita; Zhang, Zhenhuan; Armstrong, Stephen P.; London, Edra C.; Chen, Weiping; Dean, Jurrien; Simons, S. Stoney

2013-01-01

TTLL5/STAMP (tubulin tyrosine ligase-like family member 5) has multiple activities in cells. TTLL5 is one of 13 TTLLs, has polyglutamylation activity, augments the activity of p160 coactivators (SRC-1 and TIF2) in glucocorticoid receptor-regulated gene induction and repression, and displays steroid-independent growth activity with several cell types. To examine TTLL5/STAMP functions in whole animals, mice were prepared with an internal deletion that eliminated several activities of the Stamp gene. This mutation causes both reduced levels of STAMP mRNA and C-terminal truncation of STAMP protein. Homozygous targeted mutant (Stamptm/tm) mice appear normal except for marked decreases in male fertility associated with defects in progressive sperm motility. Abnormal axonemal structures with loss of tubulin doublets occur in most Stamptm/tm sperm tails in conjunction with substantial reduction in α-tubulin polyglutamylation, which closely correlates with the reduction in mutant STAMP mRNA. The axonemes in other structures appear unaffected. There is no obvious change in the organs for sperm development of WT versus Stamptm/tm males despite the levels of WT STAMP mRNA in testes being 20-fold higher than in any other organ examined. This defect in male fertility is unrelated to other Ttll genes or 24 genes previously identified as important for sperm function. Thus, STAMP appears to participate in a unique, tissue-selective TTLL-mediated pathway for α-tubulin polyglutamylation that is required for sperm maturation and motility and may be relevant for male fertility. PMID:23558686

Association of mandated language access programming and quality of care provided by mental health agencies.

Science.gov (United States)

McClellan, Sean R; Snowden, Lonnie

2015-01-01

This study examined the association between language access programming and quality of psychiatric care received by persons with limited English proficiency (LEP). In 1999, the California Department of Mental Health required county Medicaid agencies to implement a "threshold language access policy" to meet the state's Title VI obligations. This policy required Medi-Cal agencies to provide language access programming, including access to interpreters and translated written material, to speakers of languages other than English if the language was spoken by at least 3,000, or 5%, of the county's Medicaid population. Using a longitudinal study design with a nonequivalent control group, this study examined the quality of care provided to Spanish speakers with LEP and a severe mental illness before and after implementation of mandatory language access programming. Quality was measured by receipt of at least two follow-up medication visits within 90 days or three visits within 180 days of an initial medication visit over a period of 38 quarter-years. On average, only 40% of Spanish-speaking clients received at least three medication follow-up visits within 180 days. In multivariate analyses, language access programming was not associated with receipt of at least two medication follow-up visits within 90 days or at least three visits within 180 days. This study found no evidence that language access programming led to increased rates of follow-up medication visits for clients with LEP.

Authentication, Time-Stamping and Digital Signatures

Science.gov (United States)

Levine, Judah

1996-01-01

Time and frequency data are often transmitted over public packet-switched networks, and the use of this mode of distribution is likely to increase in the near future as high-speed logical circuits transmitted via networks replace point-to-point physical circuits. ALthough these networks have many technical advantages, they are susceptible to evesdropping, spoofing, and the alteration of messages enroute using techniques that are relatively simple to implement and quite difficult to detect. I will discuss a number of solutions to these problems, including the authentication mechanism used in the Network Time Protocol (NTP) and the more general technique of signing time-stamps using public key cryptography. This public key method can also be used to implement the digital analog of a Notary Public, and I will discuss how such a system could be realized on a public network such as the Internet.

CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

Directory of Open Access Journals (Sweden)

Pasquale Russo Spena

2017-10-01

Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

Women's experiences accessing a women-centered cardiac rehabilitation program: a qualitative study.

Science.gov (United States)

Rolfe, Danielle E; Sutton, Erica J; Landry, Mireille; Sternberg, Len; Price, Jennifer A D

2010-01-01

The health benefits of cardiac rehabilitation (CR) for women living with heart disease are well documented, yet women remain underrepresented in traditionally structured CR programs. This health service delivery gap has been attributed to a number of sex-related factors experienced by women, including lower rates of physician referral, travel-related barriers, competing work and caregiving responsibilities, greater cardiovascular disease severity, and number of comorbid health conditions. Whether a program specifically designed for women is able to address these barriers and facilitate women's participation is a question that has seldom been explored in the CR literature. As part of a larger study exploring whether 6 predefined principles of women's health (empowerment of women, accessible programs, broad definition of health care, high-quality of care, collaborative planning, and innovative and creative approaches) are reflected in the practices of the Women's Cardiovascular Health Initiative (WCHI) (a comprehensive CR and primary prevention program designed for women), the objective of this analysis was to explore how the principle of "accessible programs" is experienced by women participating in the WCHI. Fourteen women previously enrolled in the WCHI program participated in a single, in-person qualitative interview. Transcripts were analyzed using a constant-comparative approach to identify relevant themes related to program accessibility. Key themes identified included participants' experiences with acquiring physician referral, negotiating transportation issues, and navigating program schedules. Women discussed how peer support and staff members' willingness to address their health-related concerns facilitated their participation. While a women-centered CR/primary prevention program may facilitate and encourage women's participation by providing flexible program schedules as well as peer and professional support, efforts are still required to address

25 CFR 170.128 - Are housing access roads and housing streets eligible for IRR Program funding?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Are housing access roads and housing streets eligible for... INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Irr Housing Access Roads § 170.128 Are housing access roads and housing streets eligible for IRR...

Extracting Hot spots of Topics from Time Stamped Documents

Science.gov (United States)

Chen, Wei; Chundi, Parvathi

2011-01-01

Identifying time periods with a burst of activities related to a topic has been an important problem in analyzing time-stamped documents. In this paper, we propose an approach to extract a hot spot of a given topic in a time-stamped document set. Topics can be basic, containing a simple list of keywords, or complex. Logical relationships such as and, or, and not are used to build complex topics from basic topics. A concept of presence measure of a topic based on fuzzy set theory is introduced to compute the amount of information related to the topic in the document set. Each interval in the time period of the document set is associated with a numeric value which we call the discrepancy score. A high discrepancy score indicates that the documents in the time interval are more focused on the topic than those outside of the time interval. A hot spot of a given topic is defined as a time interval with the highest discrepancy score. We first describe a naive implementation for extracting hot spots. We then construct an algorithm called EHE (Efficient Hot Spot Extraction) using several efficient strategies to improve performance. We also introduce the notion of a topic DAG to facilitate an efficient computation of presence measures of complex topics. The proposed approach is illustrated by several experiments on a subset of the TDT-Pilot Corpus and DBLP conference data set. The experiments show that the proposed EHE algorithm significantly outperforms the naive one, and the extracted hot spots of given topics are meaningful. PMID:21765568

A Path-Independent Forming Limit Criterion for Stamping Simulations

International Nuclear Information System (INIS)

Zhu Xinhai; Chappuis, Laurent; Xia, Z. Cedric

2005-01-01

Forming Limit Diagram (FLD) has been proved to be a powerful tool for assessing necking failures in sheet metal forming analysis for majority of stamping operations over the last three decades. However, experimental evidence and theoretical analysis suggest that its applications are limited to linear or almost linear strain paths during its deformation history. Abrupt changes or even gradual deviations from linear strain-paths will shift forming limit curves from their original values, a situation that occurs in vast majority of sequential stamping operations such as where the drawing process is followed by flanging and re-strike processes. Various forming limit models have been put forward recently to provide remedies for the problem, noticeably stress-based and strain gradient-based forming limit criteria. This study presents an alternative path-independent forming limit criterion. Instead of traditional Forming Limit Diagrams (FLD) which are constructed in terms of major - minor principal strains throughout deformation history, the new criterion defines a critical effective strain ε-bar* as the limit strain for necking, and it is shown that ε-bar* can be expressed as a function of current strain rate state and material work hardening properties, without the need of explicitly considering strain-path effects. It is given by ε-bar* = f(β, k, n) where β = (dε 2 /dε 1 ) at current deformation state, and k and n are material strain hardening parameters if a power law is assumed. The analysis is built upon previous work by Storen and Rice [1975] and Zhu et al [2002] with the incorporation of anisotropic yield models such as Hill'48 for quadratic orthotropic yield and Hill'79 for non-quadratic orthotropic yield. Effects of anisotropic parameters such as R-values and exponent n-values on necking are investigated in detail for a variety of strain paths. Results predicted according to current analysis are compared against experimental data gathered from literature

Organic thin film transistors and polymer light-emitting diodes patterned by polymer inking and stamping

International Nuclear Information System (INIS)

Li Dawen; Guo, L Jay

2008-01-01

To fully realize the advantages of organic flexible electronics, patterning is very important. In this paper we show that a purely additive patterning technique, termed polymer inking and stamping, can be used to pattern conductive polymer PEDOT and fabricate sub-micron channel length organic thin film transistors. In addition, we applied the technique to transfer a stack of metal/conjugated polymer in one step and fabricated working polymer light-emitting devices. Based on the polymer inking and stamping technique, a roll-to-roll printing for high throughput fabrication has been demonstrated. We investigated and explained the mechanism of this process based on the interfacial energy consideration and by using the finite element analysis. This technique can be further extended to transfer more complex stacked layer structures, which may benefit the research on patterning on flexible substrates

41 CFR 51-10.149 - Program accessibility: Discrimination prohibited.

Science.gov (United States)

2010-07-01

...: Discrimination prohibited. 51-10.149 Section 51-10.149 Public Contracts and Property Management Other Provisions Relating to Public Contracts COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED 10... FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED § 51-10.149 Program accessibility...

Policies and programs to facilitate access to targeted cancer therapies in Thailand.

Directory of Open Access Journals (Sweden)

Rosarin Sruamsiri

Full Text Available Increasing access to clinically beneficial targeted cancer medicines is a challenge in every country due to their high cost. We describe the interplay of innovative policies and programs involving multiple stakeholders to facilitate access to these medicines in Thailand, as well as the utilization of selected targeted therapies over time.We selected two medicines on the 2013 Thai national list of essential medicines (NLEM [letrozole and imatinib] and three unlisted medicines for the same indications [trastuzumab, nilotinib and dasatinib]. We created timelines of access policies and programs for these products based on scientific and grey literature. Using IMS Health sales data, we described the trajectories of sales volumes of the study medicines between January 2001 and December 2012. We compared estimated average numbers of patients treated before and after the implementation of policies and programs for each product.Different stakeholders implemented multiple interventions to increase access to the study medicines for different patient populations. During 2007-2009, the Thai Government created a special NLEM category with different coverage requirements for payers and issued compulsory licenses; payers negotiated prices with manufacturers and engaged in pooled procurement; pharmaceutical companies expanded patient assistance programs and lowered prices in different ways. Compared to before the interventions, estimated numbers of patients treated with each medicine increased significantly afterwards: for letrozole from 645 (95% CI 366-923 to 3683 (95% CI 2,748-4,618; for imatinib from 103 (95% CI 72-174 to 350 (95% CI 307-398; and for trastuzumab from 68 (95% CI 45-118 to 412 (95% CI 344-563.Government, payers, and manufacturers implemented multi-pronged approaches to facilitate access to targeted cancer therapies for the Thai population, which differed by medicine. Routine monitoring is needed to assess clinical and economic impacts of these

Effects of Pre-Strain on the Aging Behavior of Al 7075 Alloy for Hot-Stamping Capability

Directory of Open Access Journals (Sweden)

Seon-Ho Jung

2018-02-01

Full Text Available The present study investigates the significance of pre-strain on the T6 aging behavior of an Al 7075 alloy for evaluating the applicability of hot stamping. In practice, the alloy was pre-strained up to 15% during solution heat treatment at 480 °C prior to quenching, and artificial aging was conducted at 120 °C. The peak aging time and precipitation behavior were compared with the alloy with pre-straining at room temperature after quenching but immediately before the artificial aging. The results showed that increasing amounts of pre-strain tend to reduce the aging time up to 50% for achieving peak hardness, which is consistent with the alloy at the T6 condition. There is a limitation for the maximum attainable amount of pre-strain of 10% for the homogeneous distribution of strain when the alloy is strained at room temperature (RT due to the low formability. The pre-strained alloy as hot stamping exhibited lowering of the peak reaction temperatures for dissolution and formation of Guinier–Preston (GP-Zones and precipitated with increasing amounts of pre-strain towards 15% through the differential scanning calorimetry analysis, thereby confirming the shortening of the peak aging time. The present study confirms the excellent potential of the hot-stamping process to extend the capability of an Al 7075 alloy.

Comparison of the methods for calculating the interfacial heat transfer coefficient in hot stamping

International Nuclear Information System (INIS)

Zhao, Kunmin; Wang, Bin; Chang, Ying; Tang, Xinghui; Yan, Jianwen

2015-01-01

This paper presents a hot stamping experimentation and three methods for calculating the Interfacial Heat Transfer Coefficient (IHTC) of 22MnB5 boron steel. Comparison of the calculation results shows an average error of 7.5% for the heat balance method, 3.7% for the Beck's nonlinear inverse estimation method (the Beck's method), and 10.3% for the finite-element-analysis-based optimization method (the FEA method). The Beck's method is a robust and accurate method for identifying the IHTC in hot stamping applications. The numerical simulation using the IHTC identified by the Beck's method can predict the temperature field with a high accuracy. - Highlights: • A theoretical formula was derived for direct calculation of IHTC. • The Beck's method is a robust and accurate method for identifying IHTC. • Finite element method can be used to identify an overall equivalent IHTC

Evaluating the Navy’s Enlisted Accessions Testing Program Based on Future Talent Needs

Science.gov (United States)

2017-03-01

NAVY’S ENLISTED ACCESSIONS TESTING PROGRAM BASED ON FUTURE TALENT NEEDS by Shereka F. Riley March 2017 Thesis Advisor: Joseph Sullivan Co...REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE EVALUATING THE NAVY’S ENLISTED ACCESSIONS TESTING PROGRAM BASED ON FUTURE TALENT ...public release. Distribution is unlimited. 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) In recent years, non-defense related industries

Can Food Stamps Do More to Improve Food Choices? An Economic Perspective--Higher Cost of Food in Some Areas May Affect Food Stamp Households' Ability To Make Healthy Food Choices

OpenAIRE

Nord, Mark; Hopwood, Heather

2007-01-01

The cost of “enough food,” estimated from the amount that low- and medium-income households in a geographic area report needing to spend to just meet their food needs, differs substantially across States and among metropolitan areas. In areas with high food costs, many food-stamp recipients are likely to have inadequate food resources to support healthy food choices.

Factors facilitating and inhibiting implementation of easy accessible sporting programs.

NARCIS (Netherlands)

Ooms, L.; Veenhof, C.

2012-01-01

Introduction: The organized sport sector has been identified as a potential setting for physical activity promotion. In The Netherlands, ten national sporting organizations were funded to develop and implement easy accessible sporting programs, especially for the least active population groups. A

Titanium nitride stamps replicating nanoporous anodic alumina films

International Nuclear Information System (INIS)

Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

2007-01-01

Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

77 FR 6479 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

Science.gov (United States)

2012-02-08

... Commercial Access; Development of Competition and Diversity in Video Programming Distribution and Carriage... contained in the Second Report and Order, FCC 11-119, pertaining to carriage of video programming vendors by multichannel video programming distributors (program carriage rules). This notice is consistent with the Secord...

76 FR 60651 - Leased Commercial Access; Development of Competition and Diversity in Video Programming...

Science.gov (United States)

2011-09-29

... programming services seeking access through their conduit.''); H.R. Rep. No. 102-628 (1992), at 41 (``[T]he... Programming Distribution and Carriage; Revision of the Commission's Program Carriage Rules; Final Rule and... Programming Distribution and Carriage AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY...

Development of Core Competencies for Paraprofessional Nutrition Educators Who Deliver Food Stamp Nutrition Education

Science.gov (United States)

Baker, Susan S.; Pearson, Meredith; Chipman, Helen

2009-01-01

The purpose of this project was to describe the process used for the development of core competencies for paraprofessional nutrition educators in Food Stamp Nutrition Education (FSNE). The development process included the efforts of an expert panel of state and multicounty FSNE leaders to draft the core competencies and the validation of those…

How to start a minimal access mitral valve program.

Science.gov (United States)

Hunter, Steven

2013-11-01

The seven pillars of governance established by the National Health Service in the United Kingdom provide a useful framework for the process of introducing new procedures to a hospital. Drawing from local experience, the author present guidance for institutions considering establishing a minimal access mitral valve program. The seven pillars of governance apply to the practice of minimally invasive mitral valve surgery, based on the principle of patient-centred practice. The author delineate the benefits of minimally invasive mitral valve surgery in terms of: "clinical effectiveness", including reduced length of hospital stay, "risk management effectiveness", including conversion to sternotomy and aortic dissection, "patient experience" including improved cosmesis and quicker recovery, and the effectiveness of communication, resources and strategies in the implementation of minimally invasive mitral valve surgery. Finally, the author have identified seven learning curves experienced by surgeons involved in introducing a minimal access mitral valve program. The learning curves are defined as: techniques of mitral valve repair, Transoesophageal Echocardiography-guided cannulation, incisions, instruments, visualization, aortic occlusion and cardiopulmonary bypass strategies. From local experience, the author provide advice on how to reduce the learning curves, such as practising with the specialised instruments and visualization techniques during sternotomy cases. Underpinning the NHS pillars are the principles of systems awareness, teamwork, communication, ownership and leadership, all of which are paramount to performing any surgery but more so with minimal access surgery, as will be highlighted throughout this paper.

An Accessible User Interface for Geoscience and Programming

Science.gov (United States)

Sevre, E. O.; Lee, S.

2012-12-01

The goal of this research is to develop an interface that will simplify user interaction with software for scientists. The motivating factor of the research is to develop tools that assist scientists with limited motor skills with the efficient generation and use of software tools. Reliance on computers and programming is increasing in the world of geology, and it is increasingly important for geologists and geophysicists to have the computational resources to use advanced software and edit programs for their research. I have developed a prototype of a program to help geophysicists write programs using a simple interface that requires only simple single-mouse-clicks to input code. It is my goal to minimize the amount of typing necessary to create simple programs and scripts to increase accessibility for people with disabilities limiting fine motor skills. This interface can be adapted for various programming and scripting languages. Using this interface will simplify development of code for C/C++, Java, and GMT, and can be expanded to support any other text based programming language. The interface is designed around the concept of maximizing the amount of code that can be written using a minimum number of clicks and typing. The screen is split into two sections: a list of click-commands is on the left hand side, and a text area is on the right hand side. When the user clicks on a command on the left hand side the applicable code is automatically inserted at the insertion point in the text area. Currently in the C/C++ interface, there are commands for common code segments that are often used, such as for loops, comments, print statements, and structured code creation. The primary goal is to provide an interface that will work across many devices for developing code. A simple prototype has been developed for the iPad. Due to the limited number of devices that an iOS application can be used with, the code has been re-written in Java to run on a wider range of devices

Microstructure, Mechanical Properties, and Toughening Mechanisms of a New Hot Stamping-Bake Toughening Steel

Science.gov (United States)

Lin, Tao; Song, Hong-Wu; Zhang, Shi-Hong; Cheng, Ming; Liu, Wei-Jie; Chen, Yun

2015-09-01

In this article, the hot stamping-bake toughening process has been proposed following the well-known concept of bake hardening. The influences of the bake time on the microstructure and the mechanical properties of the hot stamped-baked part were studied by means of scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and mechanical tests at room temperature. The results show that the amount of the retained austenite was nearly not changed by the bake process. Also observed were spherical Cu-rich precipitates of about 15 nm in martensite laths. According to the Orowan mechanism, their contribution of the Cu-rich precipitates to the strength is approximately 245 MPa. With the increase of the bake time, the tensile strength of the part was decreased, whereas both the ductility and the product of the tensile strength and ductility were increased then decreased. The tensile strength and ductility product and the tensile strength are as high as 21.9 GPa pct, 2086 MPa, respectively. The excellent combined properties are due to the transformation-induced plasticity effect caused by retained austenite.

Determination of stamp deformation during imprinting on semi-spherical surfaces

DEFF Research Database (Denmark)

Kafka, Jan; Matschuk, Maria; Pranov, Henrik

of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

Fabrication of Glass Microchannel via Glass Imprinting using a Vitreous Carbon Stamp for Flow Focusing Droplet Generator

Science.gov (United States)

Refatul Haq, Muhammad; Kim, Youngkyu; Kim, Jun; Oh, Pyoung-hwa; Ju, Jonghyun; Kim, Seok-Min; Lim, Jiseok

2017-01-01

This study reports a cost-effective method of replicating glass microfluidic chips using a vitreous carbon (VC) stamp. A glass replica with the required microfluidic microstructures was synthesized without etching. The replication method uses a VC stamp fabricated by combining thermal replication using a furan-based, thermally-curable polymer with carbonization. To test the feasibility of this method, a flow focusing droplet generator with flow-focusing and channel widths of 50 µm and 100 µm, respectively, was successfully fabricated in a soda-lime glass substrate. Deviation between the geometries of the initial shape and the vitreous carbon mold occurred because of shrinkage during the carbonization process, however this effect could be predicted and compensated for. Finally, the monodispersity of the droplets generated by the fabricated microfluidic device was evaluated. PMID:29286341

Fabrication of Glass Microchannel via Glass Imprinting using a Vitreous Carbon Stamp for Flow Focusing Droplet Generator

Directory of Open Access Journals (Sweden)

Hyungjun Jang

2017-12-01

Full Text Available This study reports a cost-effective method of replicating glass microfluidic chips using a vitreous carbon (VC stamp. A glass replica with the required microfluidic microstructures was synthesized without etching. The replication method uses a VC stamp fabricated by combining thermal replication using a furan-based, thermally-curable polymer with carbonization. To test the feasibility of this method, a flow focusing droplet generator with flow-focusing and channel widths of 50 µm and 100 µm, respectively, was successfully fabricated in a soda-lime glass substrate. Deviation between the geometries of the initial shape and the vitreous carbon mold occurred because of shrinkage during the carbonization process, however this effect could be predicted and compensated for. Finally, the monodispersity of the droplets generated by the fabricated microfluidic device was evaluated.

Stamping SERS for creatinine sensing

Science.gov (United States)

Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

2015-03-01

Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

NARCIS (Netherlands)

Karanikas, Nektarios; Schwarz, M; Harfmann, J

2017-01-01

A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

Moving from College Aspiration to Attainment: Learning from One College Access Program

Science.gov (United States)

Dyce, Cherrel Miller; Albold, Cheryll; Long, Deborah

2013-01-01

Using data from a survey of 75 parents and high school students who were eligible for a college access program, this article examines parents' and students' college aspirations and their confidence in fulfilling that goal. The authors argue that pre-college preparation programs can benefit from the non-economic forms of capital that these families…

Time stamp generation with inverse FIR filters for Positron Emission Tomography

International Nuclear Information System (INIS)

Namias, Mauro

2009-01-01

Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

Associations of food stamp participation with dietary quality and obesity in children.

Science.gov (United States)

Leung, Cindy W; Blumenthal, Susan J; Hoffnagle, Elena E; Jensen, Helen H; Foerster, Susan B; Nestle, Marion; Cheung, Lilian W Y; Mozaffarian, Dariush; Willett, Walter C

2013-03-01

To determine if obesity and dietary quality in low-income children differed by participation in the Supplemental Nutrition Assistance Program (SNAP), formerly the Food Stamp Program. The study population included 5193 children aged 4 to 19 with household incomes ≤130% of the federal poverty level from the 1999-2008 NHANES. Diet was measured by using 24-hour recalls. Among low-income US children, 28% resided in households currently receiving SNAP benefits. After adjusting for sociodemographic differences, SNAP participation was not associated with a higher rate of childhood obesity (odds ratio = 1.11, 95% confidence interval [CI]: 0.71-1.74). Both SNAP participants and low-income nonparticipants were below national recommendations for whole grains, fruits, vegetables, fish, and potassium, while exceeding recommended limits for processed meat, sugar-sweetened beverages, saturated fat, and sodium. Zero percent of low-income children met at least 7 of 10 dietary recommendations. After multivariate adjustment, compared with nonparticipants, SNAP participants consumed 43% more sugar-sweetened beverages (95% CI: 8%-89%), 47% more high-fat dairy (95% CI: 7%, 101%), and 44% more processed meats (95% CI: 9%-91%), but 19% fewer nuts, seeds, and legumes (95% CI: -35% to 0%). In part due to these differences, intakes of calcium, iron, and folate were significantly higher among SNAP participants. Significant differences by SNAP participation were not evident in total energy, macronutrients, Healthy Eating Index 2005 scores, or Alternate Healthy Eating Index scores. The diets of low-income children are far from meeting national dietary recommendations. Policy changes should be considered to restructure SNAP to improve children's health.

Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

Science.gov (United States)

Brittain, Harry G

2016-01-01

Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates. © The Author(s) 2015.

77 FR 5027 - Food and Drug Administration Transparency Initiative: Exploratory Program To Increase Access to...

Science.gov (United States)

2012-02-01

...] Food and Drug Administration Transparency Initiative: Exploratory Program To Increase Access to the... entitled ``Food and Drug Administration Transparency Initiative: Exploratory Program to [[Page 5028

All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

DEFF Research Database (Denmark)

Mikkelsen, Morten Bo Lindholm; Letailleur, Alban A; Søndergård, Elin

2011-01-01

We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprin......We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination...... of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without...

Analysis Of Die Design For The Stamping Of A Bathtub

Directory of Open Access Journals (Sweden)

Hojny M.

2015-06-01

Full Text Available The paper presents example results of numerical and photogrammetric analysis leading to identify the causes of cracking and wrinkling during bathtub W1200 production. The verification of tools for the stamping of bathtub W1200 was performed using finite element method and photogrammetric system ATOS Triple Scan. A series of industrial tests was conducted to identify the model parameters. The major and minor strain distributions obtained from the finite element simulations were used in conjunction with the forming limit diagram to predict the onset of fracture. In addition, the effects of blank holder pressure and friction on the occurrence of fracture and wrinkling were investigated.

An interactive and flexible approach to stamping design and optimization

International Nuclear Information System (INIS)

Roy, Subir; Kunju, Ravi; Kirby, David

2004-01-01

This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

Duct Remediation Program: Engineered access research and construction

International Nuclear Information System (INIS)

Beckman, T.D.; Davis, M.M.; Karas, T.M.

1992-01-01

The Rocky Flats Plant, Duct Remediation mission concentrated on removing Plutonium Oxide from the process ductwork in the primary Plutonium processing facility. When possible, remediation took place from existing process gloveboxes. Fifteen locations were identified, however, that required accessing duct runs where no process gloveboxes existed. The building's second floor utility areas had many locations where long, inaccessible duct runs were prevalent. Consequently, an extensive program for design, procurement and construction was initiated to contain and isolate ducts for penetration when existing glovebox sites were not present

Ramón y Cajal erroneously identified as Camillo Golgi on a souvenir postage stamp.

Science.gov (United States)

Triarhou, Lazaros C; del Cerro, Manuel

2012-01-01

Focusing on a philatelic oddity that erringly identifies a picture of Santiago Ramón y Cajal as that of Camillo Golgi, this brief article examines official and unofficial stamp issues honoring the two great neuroanatomists, one from Spain and the other from Italy, who were early Nobel Prize winners in Physiology or Medicine.

Defect detection and classification of galvanized stamping parts based on fully convolution neural network

Science.gov (United States)

Xiao, Zhitao; Leng, Yanyi; Geng, Lei; Xi, Jiangtao

2018-04-01

In this paper, a new convolution neural network method is proposed for the inspection and classification of galvanized stamping parts. Firstly, all workpieces are divided into normal and defective by image processing, and then the defective workpieces extracted from the region of interest (ROI) area are input to the trained fully convolutional networks (FCN). The network utilizes an end-to-end and pixel-to-pixel training convolution network that is currently the most advanced technology in semantic segmentation, predicts result of each pixel. Secondly, we mark the different pixel values of the workpiece, defect and background for the training image, and use the pixel value and the number of pixels to realize the recognition of the defects of the output picture. Finally, the defect area's threshold depended on the needs of the project is set to achieve the specific classification of the workpiece. The experiment results show that the proposed method can successfully achieve defect detection and classification of galvanized stamping parts under ordinary camera and illumination conditions, and its accuracy can reach 99.6%. Moreover, it overcomes the problem of complex image preprocessing and difficult feature extraction and performs better adaptability.

Fabrication of a silicon oxide stamp by edge lithography reinforced with silicon nitride for nanoimprint lithography

NARCIS (Netherlands)

Zhao, Yiping; Berenschot, Johan W.; de Boer, M.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

2008-01-01

The fabrication of a stamp reinforced with silicon nitride is presented for its use in nanoimprint lithography. The fabrication process is based on edge lithography using conventional optical lithography and wet anisotropic etching of 110 silicon wafers. SiO2 nano-ridges of 20 nm in width were

77 FR 4688 - National School Lunch Program: Direct Certification Continuous Improvement Plans Required by the...

Science.gov (United States)

2012-01-31

... local educational agencies (LEAs) that participate in the NSLP and/or School Breakfast Program to... performance benchmarks for directly certifying for free school meals those children who are members of... requirements, School breakfast and lunch programs. 7 CFR Part 272 Alaska, Civil rights, Claims, Food stamps...

How to start a minimal access mitral valve program

OpenAIRE

Hunter, Steven

2013-01-01

The seven pillars of governance established by the National Health Service in the United Kingdom provide a useful framework for the process of introducing new procedures to a hospital. Drawing from local experience, the author present guidance for institutions considering establishing a minimal access mitral valve program. The seven pillars of governance apply to the practice of minimally invasive mitral valve surgery, based on the principle of patient-centred practice. The author delineate t...

Improvement in current density of nano- and micro-structured Si solar cells by cost-effective elastomeric stamp process

Science.gov (United States)

Jeon, Kiseok; Jee, Hongsub; Lim, Sangwoo; Park, Min Joon; Jeong, Chaehwan

2018-03-01

Effective incident light should be controlled for improving the current density of solar cells by employing nano- and micro-structures on silicon surface. The elastomeric stamp process, which is more cost effective and simpler than conventional photolithography, was proposed for the fabrication of nano- and micro-structures. Polydimethylsiloxane (PDMS) was poured on a mother pattern with a diameter of 6 μm and a spacing of 2 μm; then, curing was performed to create a PDMS mold. The regular micropattern was stamped on a low-viscosity resin-coated silicon surface, followed by the simple reactive ion etching process. Nano-structures were formed using the Ag-based electroless etching process. As etching time was increased to 6 min, reflectance decreased to 4.53% and current density improved from 22.35 to 34.72 mA/cm2.

Dual Language Immersion Program Equity and Access: Is There Equity for All Students?

Science.gov (United States)

Fernandez, Patricia Espinoza

2016-01-01

This is a mixed methods study of K-12 school administrators with dual language immersion school leadership expertise. The paramount research focus was to identify equity and access issues in dual language immersion programs serving grades K-12, as identified by school administrators who have led such programs. A total pool of 498 were invited to…

Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

DEFF Research Database (Denmark)

Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

2007-01-01

A highly conducting stretchable polymer material has been patterned using additive inkjet printing and by subtractive agarose stamping of a deactivation agent (hypochlorite). The material consisted of elastomeric polyurethane combined in an interpenetrating network with a conductive polymer, poly(3....... Inkjet printing of the material was only possible if a short-chain polyurethane was used as elastomer to overcome strain hardening at the neck of the droplets produced for printing. Reproducible line widths down to 200 μm could be achieved by inkjet printing. Both methods were used to fabricate test...

Event for the launch of the Georges Charpak postage stamp | 26-27 February | Prévessin site

CERN Multimedia

2016-01-01

At the end of February, the French post office is releasing a new €0.70 stamp featuring an image of Georges Charpak. CERN is taking part in this event by hosting a temporary post office on the Prévessin site, which will sell the stamp with a special “first day” postmark before it goes on general sale.     Georges Charpak arrived at CERN in 1959 and, in the late 1960s, revolutionised particle detection technology by developing the multiwire proportional chamber. This technique brought particle detectors into the electronic era, setting physicists free from the laborious task of studying photographs one by one. In 1992, he was awarded the Nobel Prize in Physics for his invention. Charpak chambers are still used today in the LHC detectors and have paved the way for the technology in numerous other modern detectors. In the 1990s, Charpak was involved in developing medical applications based on particle detection technology. He was als...

The Arts and 504, A Handbook for Accessible Arts Programming. Revised.

Science.gov (United States)

National Endowment for the Arts, Washington, DC.

This handbook is designed to assist arts organizations in complying with disability access regulations. It details how to include the needs of disabled people into programming efforts and also provides information on the Arts Endowment's 504 Regulation, which applies to federally funded organizations, and the 1990 Americans with Disabilities Act…

77 FR 24169 - Notice of Funds Availability: Inviting Applications for the Market Access Program

Science.gov (United States)

2012-04-23

... for the 2013 Market Access Program (MAP). The intended effect of this notice is to solicit...-term agricultural trade strategy and a program effectiveness time line against which results can be... part of the FAS resource allocation strategy to fund applicants who can demonstrate performance and...

76 FR 21325 - Notice of Funds Availability: Inviting Applications for the Market Access Program

Science.gov (United States)

2011-04-15

... for the 2012 Market Access Program (MAP). The intended effect of this notice is to solicit...-term agricultural trade strategy and a program effectiveness time line against which results can be... part of the FAS resource allocation strategy to fund applicants who can demonstrate performance and...

75 FR 26194 - Notice of Funds Availability: Inviting Applications for the Market Access Program

Science.gov (United States)

2010-05-11

... for the 2011 Market Access Program (MAP). The intended effect of this notice is to solicit... considers whether the applicant provides a clear, long-term agricultural trade strategy and a program... the greatest growth potential. These factors are part of the FAS resource allocation strategy to fund...

Access to health programs at the workplace and the reduction of work presenteeism: a population-based cross-sectional study.

Science.gov (United States)

Bustillos, Arnaldo Sanchez; Trigoso, Oswaldo Ortiz

2013-11-01

To examine access to health programs at workplace as a determinant of presenteeism among adults. Data source was a subsample of the 2009-2010 Canadian Community Health Survey. The outcome was self-reported reduced activities at work (presenteeism). The explanatory variable was self-reported access to a health program at workplace. Logistic regression was used to measure the association between outcome and explanatory variables adjusting for potential confounders. Adjusting for sex, age, education, income, work stress, and chronic conditions, presenteeism was not associated with having access to a health program at workplace (adjusted odds ratio, 1.23; 95% confidence interval, 0.91 to 1.65). The odds of presenteeism were higher in workers who reported high work stress and those with chronic medical conditions. This study found that access to health programs at workplace is not significantly associated with a decline in presenteeism.

78 FR 23893 - Notice of Funds Availability: Inviting Applications for the Market Access Program

Science.gov (United States)

2013-04-23

... inviting proposals for the 2014 Market Access Program (MAP). The intended effect of this notice is to... strategy and a program effectiveness time line against which results can be measured at specific intervals... allocation strategy to fund applicants who can demonstrate performance and address the objectives of the GPRA...

IAU astroEDU: an open-access platform for peer-reviewed astronomy education activities

Science.gov (United States)

Heenatigala, Thilina; Russo, Pedro; Strubbe, Linda; Gomez, Edward

2015-08-01

astroEDU is an open access platform for peer-reviewed astronomy education activities. It addresses key problems in educational repositories such as variability in quality, not maintained or updated regularly, limited content review, and more. This is achieved through a peer-review process similar to what scholarly articles are based on. Activities submitted are peer-reviewed by an educator and a professional astronomer which gives the credibility to the activities. astroEDU activities are open-access in order to make the activities accessible to educators around the world while letting them discover, review, distribute and remix the activities. The activity submission process allows authors to learn how to apply enquiry-based learning into the activity, identify the process skills required, how to develop core goals and objectives, and how to evaluate the activity to determine the outcome. astroEDU is endorsed by the International Astronomical Union meaning each activity is given an official stamp by the international organisation for professional astronomers.

7 CFR 277.4 - Funding.

Science.gov (United States)

2010-01-01

... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM PAYMENTS OF CERTAIN ADMINISTRATIVE COSTS OF STATE AGENCIES...' allowable Food Stamp Program administrative costs. This rate includes reimbursement for food stamp... designed to persuade an individual who has made an informed choice not to apply for food stamps to change...

The art of grocery shopping on a food stamp budget: factors influencing the food choices of low-income women as they try to make ends meet.

Science.gov (United States)

Wiig, Kristen; Smith, Chery

2009-10-01

Amidst a hunger-obesity paradox, the purpose of the present study was to examine the grocery shopping behaviour and food stamp usage of low-income women with children to identify factors influencing their food choices on a limited budget. Focus groups, which included questions based on Social Cognitive Theory constructs, examined food choice in the context of personal, behavioural and environmental factors. A quantitative grocery shopping activity required participants to prioritize food purchases from a 177-item list on a budget of $US 50 for a one-week period, an amount chosen based on the average household food stamp allotment in 2005. Ninety-two low-income women, with at least one child aged 9-13 years in their household, residing in the Twin Cities, Minnesota, USA. Participants' mean age was 37 years, and 76% were overweight or obese (BMI> or =25.0 kg/m2). Key findings suggest that their food choices and grocery shopping behaviour were shaped by not only individual and family preferences, but also their economic and environmental situation. Transportation and store accessibility were major determinants of shopping frequency, and they used various strategies to make their food dollars stretch (e.g. shopping based on prices, in-store specials). Generally, meat was the most important food group for purchase and consumption, according to both the qualitative and quantitative data. Efforts to improve food budgeting skills, increase nutrition knowledge, and develop meal preparation strategies involving less meat and more fruits and vegetables, could be valuable in helping low-income families nutritionally make the best use of their food dollars.

Accessing Secondary Markets as a Capital Source for Energy Efficiency Finance Programs: Program Design Considerations for Policymakers and Administrators

Energy Technology Data Exchange (ETDEWEB)

Kramer, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Martin, E. Fadrhonc [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Thompson, P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goldman, C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-02-01

Estimates of the total opportunity for investment in cost-effective energy efficiency in the United States are typically in the range of several hundred billion dollars (Choi Granade, et al., 2009 and Fulton & Brandenburg, 2012).1,2 To access this potential, many state policymakers and utility regulators have established aggressive energy efficiency savings targets. Current levels of taxpayer and utility bill-payer funding for energy efficiency is only a small fraction of the total investment needed to meet these targets (SEE Action Financing Solutions Working Group, 2013). Given this challenge, some energy efficiency program administrators are working to access private capital sources with the aim of amplifying the funds available for investment. In this context, efficient access to secondary market capital has been advanced as one important enabler of the energy efficiency industry “at scale.”3 The question of what role secondary markets can play in bringing energy efficiency to scale is largely untested despite extensive attention from media, technical publications, advocates, and others. Only a handful of transactions of energy efficiency loan products have been executed to date, and it is too soon to draw robust conclusions from these deals. At the same time, energy efficiency program administrators and policymakers face very real decisions regarding whether and how to access secondary markets as part of their energy efficiency deployment strategy.

Development and Testing of a Nutrition, Food Safety, and Physical Activity Checklist for EFNEP and FSNE Adult Programs

Science.gov (United States)

Bradford, Traliece; Serrano, Elena L.; Cox, Ruby H.; Lambur, Michael

2010-01-01

Objective: To develop and assess reliability and validity of the Nutrition, Food Safety, and Physical Activity Checklist to measure nutrition, food safety, and physical activity practices among adult Expanded Food and Nutrition Education Program (EFNEP) and Food Stamp Nutrition Education program (FSNE) participants. Methods: Test-retest…

The National Access to Antiretroviral Program for PHA (NAPHA) in Thailand.

Science.gov (United States)

Chasombat, Sanchai; Lertpiriyasuwat, Cheewanan; Thanprasertsuk, Sombat; Suebsaeng, Laksami; Lo, Ying Ru

2006-07-01

To describe the development, components, initial results and lessons learned from Thailand's National Access to Antiretroviral Program for People living with HIV/AIDS (NAPHA), a historical review was conducted and program monitoring was analyzed. The national antiretroviral therapy program at different levels of the public health system was implemented with all major program components; ARV protocol development, health care professional training, drug supply chain management, laboratory network formation, monitoring and evaluation, and multi-sector and PHA involvement since 2001, which was based on elements of research, pilot projects, training, national guideline development, experiences and policy making. A national monitoring system was developed to monitor the progress of the program. From February 2001 to December 2004, the monitoring reports received from implementing hospitals showed that 58,133 cases had received antiretroviral therapy (ART), and 85% (49,477) of them were continuing to take ARV drugs. In conclusion, the NAPHA was implemented nationwide with comprehensive systems. The reports indicate achievement of expansion of the ART program. Lessons learned from the program initiation and scaling up show local leadership, comprehensive training, adherence, and coordination are essential to program effectiveness and sustainability.

Strength training in community settings: impact of lay leaders on program access and sustainability for rural older adults.

Science.gov (United States)

Washburn, Lisa T; Cornell, Carol E; Phillips, Martha; Felix, Holly; Traywick, LaVona

2014-09-01

The effect of volunteer lay leaders on availability and sustainability of strength-training programs for older adults has not been well explored. We describe implementation of the StrongWomen strength training program by the Arkansas Cooperative Extension Service, and report on the relationship between delivery approach (agent-led, lay-led, or combination of agent- and lay-led) and program access and sustainability. All state Extension agents (n = 66) were surveyed on program implementation, continuance, and use of lay leaders. Program records were used to identify the number of trained lay leaders. Regression models were used to examine the relationship between delivery approach and group availability. Counties using lay leaders had twice as many groups as counties using only agents. There was a significant, positive relationship between the number of lay leaders and the number of groups. Counties using lay leaders were 8.3 times more likely to have continuing groups compared with counties not using lay leaders. Program continuance was significantly and positively associated with lay leader use. Lay delivery expanded access to strength training programs and increased the likelihood that programs would continue. This approach can be used to increase access to and sustainability of strength training programs, particularly in resource-constrained areas.

Health Care Access and Use Among Low-Income Children on Subsidized Insurance Programs in California.

OpenAIRE

Christopher Trenholm; Anna Saltzman; Shanna Shulman; Michael Cousineau; Dana Hughes

2008-01-01

This paper summarizes the CaliforniaKids and Healthy Kids programs—county-based insurance programs in California for low-income children. The study examined features of both programs, use of basic health care services by the children enrolled, and typical experiences accessing inpatient and other high-cost care. Children enrolled in the two programs made substantial use of outpatient health care, despite important variation in program features. The study concludes with recommendations on ho...

Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

DEFF Research Database (Denmark)

Taylor, Hayden; Smistrup, Kristian; Boning, Duane

2011-01-01

We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

Open-Access Physical Activity Programs for Older Adults: A Pragmatic and Systematic Review.

Science.gov (United States)

Balis, Laura E; Strayer, Thomas; Ramalingam, NithyaPriya; Wilson, Meghan; Harden, Samantha M

2018-01-10

Open-access, community-based programs are recommended to assist older adults in meeting physical activity guidelines, but the characteristics, impact, and scalability of these programs is less understood. The Land-Grant University Cooperative Extension System, an organization providing education through county-based educators, functions as a delivery system for these programs. A systematic review was conducted to determine characteristics of effective older adult physical activity programs and the extent to which programs delivered in Extension employ these characteristics. A systematic review of peer-reviewed and grey literature was conducted from August 2016 to February 2017. The review was limited to open-access (available to all), community-based physical activity interventions for older adults (≥65 years of age). The peer-reviewed literature search was conducted in PubMed and EBSCOhost; the grey literature search for Extension interventions was conducted through Extension websites, Land-Grant Impacts, and the Journal of Extension. Sixteen peer-reviewed studies and 17 grey literature sources met inclusion criteria and were analyzed. Peer-reviewed and Extension programs were similar in their limited use of behavioral theories and group-based strategies. Compared to Extension programs, those in the peer-reviewed literature were more likely to use a combination of physical activity components and be delivered by trained professionals. The results indicate notable differences between peer-reviewed literature and Extension programs and present an opportunity for Extension programs to more effectively use evidence-based program characteristics, including behavioral theories and group dynamics, a combination of physical activity components, and educator/agent-trained delivery agents. © The Author(s) 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Pediatric Diabetes Telemedicine Program Improves Access to Care for Rural Families: Role of APRNs.

Science.gov (United States)

Smith, Nancy Marie; Satyshur, Rosemarie DiMauro

2016-01-01

Type 1 diabetes mellitus has increased in children by 23% from 2001 to 2009. Rural communities additionally have increased disparities related to access barriers and a large minority population with poorer overall health. Research evidence supports telemedicine as an effective alternative to bring preventive diabetes care to remote areas. This article presents an overview of the leadership role of advanced practice registered nurses (APRNs) with the implementation and evaluation of a pediatric diabetes telemedicine program at a rural pediatric outpatient specialty clinic in partnership with a tertiary center telemedicine network. The telemedicine program quality improvement (QI) project explored caregiver satisfaction with a convenience sample of caregivers (N = 14) using a nine-item Telemedicine Diabetes Caregiver Satisfaction Survey (TDCSS), with responses ranging from 1 = strongly disagree to 5 = strongly agree. Findings indicate caregivers were highly satisfied with communication/ privacy (M = 4.8), access to care (M = 4.1), and quality of services (M = 5.0). The multidisciplinary collaborative teamwork, continuous QI, and dependable technology were integral to the quality of the telemedicine clinical initiative. APRNs provided technology expertise, interdisciplinary collaboration leadership, care coordination, and advocacy for policy changes. Results demonstrate that telemedicine and APRN leadership can help implement innovative programs into rural communities to improve access to care, healthcare cost, and outcomes.

Springback Reduction in Stamping of Front Side Member with a Response Surface Method

International Nuclear Information System (INIS)

Song, Jung-Han; Huh, Hoon; Kim, Se-Ho; Park, Sung-Ho

2005-01-01

Springback is a common phenomenon in sheet metal forming since the elastic recovery of the internal stresses is induced after removal of the tooling. The numerical analysis of springback is a complicated time-consuming job and its result is greatly effected by a type of the yield function, finite elements used and the constraint condition for eliminating a rigid body motion. In this paper, optimization of the draw-bead force is carried out utilizing the response surface method in order to reduce springback and improve shape accuracy of a deep drawn product. In the optimization process, the tendency of springback is evaluated qualitatively without springback simulation usually done with the implicit solving scheme. Instead of springback simulation, the amount of stress deviation along the thickness direction in the deep drawn product is used as an indicator of springback. The stamping process is analyzed for a front side member formed with advanced high strength steel (AHSS) sheets such as DP60. The analysis procedure fully covers the binder-wrap, stamping, trimming and springback processes with the commercial elasto-plastic finite element code LS-DYNA 3D. The effect of the restraining force of draw-beads is confirmed with the decreased stress deviation. The analysis result shown in the final springback simulation demonstrates that the present analysis provides a guideline for controlling the evolution of springback based on the finite element simulation of complicated auto-body members

Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients

DEFF Research Database (Denmark)

Koefoed-Nielsen, Pernille; Weinreich, I; Bengtsson, M

2017-01-01

BACKGROUND: Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program...

Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

International Nuclear Information System (INIS)

Dague, E; Jauvert, E; Laplatine, L; Thibault, C; Viallet, B; Ressier, L

2011-01-01

Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

Experimental study on the warm forming and quenching behavior for hot stamping of high-strength aluminum alloys

Science.gov (United States)

Degner, J.; Horn, A.; Merklein, M.

2017-09-01

Within the last decades, stringent regulations on fuel consumption, CO2 emissions and product recyclability forced the automotive sector to implement new strategies within the field of car body manufacturing. Due to their low density and good corrosion resistance, aluminum became one of the most relevant lightweight materials. Recently, especially high- strength aluminum alloys for structural components gained importance. Since the low formability of these alloys limits their application, there is a need for novel process strategies in order to enhance the forming behavior. One promising approach is the hot stamping of aluminum alloys. The combination of quenching and forming in one step after solution heat treatment leads to a significant improvement of the formability. Furthermore, higher manufacturing accuracy can be achieved due to reduced spring back. Within this contribution, the influence of forming temperature on the subsequent material behavior and the heat transfer during quenching will be analyzed. Therefore, the mechanical and thermal material characteristics such as flow behavior and heat transfer coefficient during hot stamping are investigated.

Auto-représentations de l’Irlande à travers les timbres et la monnaie Self-representations of Ireland through Stamps and Coinage

Directory of Open Access Journals (Sweden)

Alexandra Dilys-Slaby

2009-11-01

Full Text Available The representation of Ireland on stamps and coinage is the locus of the formulation by the government of national identity—a crucial stage in the development of a newly independent state. Charles Sanders Peirce’s semiotic trilogy—symbol, icon and index—enables one to better understand the intentions and the evolution informing the State’s self-representation. The stakes vary from one medium to another. Coins and notes are images of Ireland which circulate inside the country only and last longer, the government intervening only occasionally to change those images. It can be noted that these media, which are more apolitical and atemporal, retain a symbolic function longer. As for stamps, they are meant to represent Ireland inside the country as well as abroad. They are then particularly entitled to representing the events or characters which Ireland includes in the development of its identity as a young State. Thus, stamps display a general evolution from being symbols to being indexes as the government acknowledges as foundations of its identity no longer merely nationalism and religion, but also scientific development, sports and art. On the level of the form, this evolution is backed by a movement towards simplification and universal legibility.

Microstructure and Properties of a New Cr - Mn Steel without Boron Additions for Use in Hot Stamping

Science.gov (United States)

Zhou, H.; Zhu, G.; Li, Q.; Chen, Q.

2015-09-01

Anew hot-stamping steel that is alloyed with chromium and manganese and does not contain boron additions has been developed. The effect of reheating temperature and cooling rates on the mechanical properties and structure of the steel is determined. Atreatment regime that increases the ductility of the steel without a noticeable decrease in its strength is proposed.

Global Access Programs: A Collaborative Approach for Effective Implementation and Management.

Science.gov (United States)

Ainge, Debra; Aitken, Suzanne; Corbett, Mark; De-Keyzer, David

Global access programs (GAPs) provide access to medicinal products for patients with serious medical conditions and no commercially available treatment options. Providing early access to medicines can be challenging for a pharmaceutical company. The demand for a GAP often occurs at a time when other activities are the prime focus, such as delivery of pivotal clinical trials or gaining of marketing authorization. Furthermore, the skills, experience, and infrastructure necessary to implement and manage a successful GAP vary significantly from those required for regular clinical trial execution, and the regulatory environment presents its own challenges, with regulations often poorly defined and with considerable inter-country variation. This article considers the triggers for early access requests and examines the need for companies to develop a global strategy for GAPs in order to respond appropriately to requests for early access. It also provides a comprehensive overview of the processes for GAP set-up, implementation, management, and closure, along with the considerations affecting the type and scope of GAP, such as demand, regulatory feasibility, license status of the product, drug pricing structure, company strategy, costs, and product supply. Also discussed is the need for appropriate personnel to implement and manage the GAP, and when to consider collaboration with an external GAP provider. In summary, GAPs require careful and efficient planning and management, from set-up to closure. Well-run GAPs provide an ethical and regulatory-compliant pathway for access of new treatments to patients with serious conditions and an unmet medical need.

Spontaneous diffusion of an effective skin cancer prevention program through Web-based access to program materials.

Science.gov (United States)

Hall, Dawn M; Escoffery, Cam; Nehl, Eric; Glanz, Karen

2010-11-01

Little information exists about the diffusion of evidence-based interventions, a process that can occur naturally in organized networks with established communication channels. This article describes the diffusion of an effective skin cancer prevention program called Pool Cool through available Web-based program materials. We used self-administered surveys to collect information from program users about access to and use of Web-based program materials. We analyzed the content of e-mails sent to the official Pool Cool Web site to obtain qualitative information about spontaneous diffusion. Program users were dispersed throughout the United States, most often learning about the program through a Web site (32%), publication (26%), or colleague (19%). Most respondents (86%) reported that their pool provided educational activities at swimming lessons. The Leader's Guide (59%) and lesson cards (50%) were the most commonly downloaded materials, and most respondents reported using these core items sometimes, often, or always. Aluminum sun-safety signs were the least frequently used materials. A limited budget was the most commonly noted obstacle to sun-safety efforts at the pool (85%). Factors supporting sun safety at the pool centered around risk management (85%) and health of the pool staff (78%). Diffusion promotes the use of evidence-based health programs and can occur with and without systematic efforts. Strategies such as providing well-packaged, user-friendly program materials at low or no cost and strategic advertisement of the availability of program materials may increase program use and exposure. Furthermore, highlighting the benefits of the program can motivate potential program users.

Památky starověké Núbie na známkách světa // Monuments of Ancient Nubia on postage stamps of the modern world

Directory of Open Access Journals (Sweden)

Břetislav Vachala

2015-06-01

Full Text Available The successful International UNESCO Campaign to Save the Monuments of (Egyptian and Sudanese Nubia became an important motif on the postage stamps of 47 countries of the world in the years 1960–1980. The stamps host famous rescued temples (listed here according to frequency of the used motifs, including general views, details of architecture and relief decoration of Abu Simbel, Philae, Wadi es-Sebua, and Dakka, the Kiosk of Qertassi and the South - ern temple of Buhen. Moreover, some of the unique painted murals found in the episcopal cathedral at Faras were reproduced on Polish stamps. The philatelic contribution to the campaign was far from symbolic. The total philatelic revenue (including income from the Philae Medals reached 112,665.64 US dollars. The philatelic activity of 47 countries substantially contributed to the publicity of the UNESCO Nubia Campaign around the world.

Good, now keep going: challenging the status quo in STEM pipeline and access programs

Science.gov (United States)

Wiseman, Dawn; Herrmann, Randy

2018-03-01

This contribution engages in conversation with McMahon, Griese, and Kenyon (this issue) to consider how the SURE program they describe represents a pragmatic approach to addressing the issue of underrepresentation of Indigenous people in STEM post-secondary programs. We explore how such programs are generally positioned and how they might be positioned differently to challenge the status quo within Western post-secondary institutions. The challenge arises from moving beyond the immediate pragmatics of addressing an identifiable issue framed as a problem to considering how post-secondary institutions and people developing access recruitment programs might begin unlearning colonialism.

Stamps, Stickers and Stigmata. A Social Practice of Antisemitism Presented in a Slide-show

Directory of Open Access Journals (Sweden)

Isabel Enzenbach

2012-07-01

Full Text Available Antisemitic stickers were disseminated in Germany from the 1880s/1890s onwards. They were glued on letters or postcards, placed visibly in public space or collected in the private sphere. In rethinking antisemitism as a social practice, these stickers, stamps and adhesive labels can be seen as a prototypical source demonstrating the performative dimension of antisemtism. The antisemitic movement used various media such as leaflets, cartoons, speeches, historical novels, articles or newspapers to mobilize people and to build up a community.

Constellation Program Electrical Ground Support Equipment Research and Development

Science.gov (United States)

McCoy, Keegan S.

2010-01-01

At the Kennedy Space Center, I engaged in the research and development of electrical ground support equipment for NASA's Constellation Program. Timing characteristics playa crucial role in ground support communications. Latency and jitter are two problems that must be understood so that communications are timely and consistent within the Kennedy Ground Control System (KGCS). I conducted latency and jitter tests using Alien-Bradley programmable logic controllers (PLCs) so that these two intrinsic network properties can be reduced. Time stamping and clock synchronization also play significant roles in launch processing and operations. Using RSLogix 5000 project files and Wireshark network protocol analyzing software, I verified master/slave PLC Ethernet module clock synchronization, master/slave IEEE 1588 communications, and time stamping capabilities. All of the timing and synchronization test results are useful in assessing the current KGCS operational level and determining improvements for the future.

New technique for laryngotracheal mucosa transplantation. 'Stamp' welding using indocyanine green dye and albumin interaction with diode laser.

Science.gov (United States)

Wang, Z; Pankratov, M M; Gleich, L L; Rebeiz, E E; Shapshay, S M

1995-07-01

To investigate (1) the possibility of survival of free mucosa "stamp" grafts fixed in the airway with a new technique using indocyanine green-dyed albumin solder activated with a diode laser and (2) the degree of improvement of wound healing in the airway by applying modified microskin transplantation techniques from burn surgery to cover a relatively large wound with a few small pieces of mucosa anchored in place with the previously mentioned technique. Three (one control and two experimental) rectangular (10 x 8 mm) wounds in tracheal mucosa were produced in four experimental animals (dogs) using a carbon dioxide laser. The control wound was left uncovered. In the first experimental wound, a mucosal flap was raised and then fixed in place by a trapdoor flap method. In the second experimental wound, two small (each 2 x 3 mm) autogenous mucosa grafts were anchored onto the surface with indocyanine green-dyed albumin activated with an 810-nm diode laser. Histomorphologically, the postoperative results from three wounds were compared. The experimental wounds were completely covered by regenerated squamous cells in 1 week and by ciliated epithelium in 2 weeks after the operation despite the discrepancy in size of the graft to wound area (1:6.7) covered with the stamp mucosa. No thermal damage from the diode laser was noted in the second experimental wounds. In the control wounds, no coverage was observed at 1 week, and only squamous cells were noted 2 weeks postoperatively. All the wounds had normal ciliated epithelium coverage at 4 weeks. Transplanted stamp grafts provided similar or better healing than trapdoor flap transplants. This new technique made endoscopic mucosal grafting possible and offers a potential breakthrough in the management of laryngotracheal stenosis.

Access 2010 Programmer's Reference

CERN Document Server

Hennig, Teresa; Griffith, Geoffrey L

2010-01-01

A comprehensive guide to programming for Access 2010 and 2007. Millions of people use the Access database applications, and hundreds of thousands of developers work with Access daily. Access 2010 brings better integration with SQL Server and enhanced XML support; this Wrox guide shows developers how to take advantage of these and other improvements. With in-depth coverage of VBA, macros, and other programming methods for building Access applications, this book also provides real-world code examples to demonstrate each topic.: Access is the leading database that is used worldwide; While VBA rem

Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

Science.gov (United States)

Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

2018-04-01

Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

On the Determination of the Blank Shape Contour for Thin Precision Parts Obtained by Stamping

International Nuclear Information System (INIS)

Azaouzi, M.; Delameziere, A.; Naceur, H.; Batoz, J. L.; Sibaud, D.; Belouettar, S.

2007-01-01

The present study deals with the 'automatic' determination of the initial blank shape contour for 3D thin metallic precision parts obtained by stamping, knowing the 3D CAD geometry of the final part (the desired product). The forming process can involve several steps presented in this paper that consists in applying a heuristic method of optimization to find out the initial blank shape of thin precision metallic part in order to obtain a final part, with a required 3D geometry (specified). The purpose of the present approach is to replace the experimental trial and error optimization method used currently, which is expensive and time consuming. The principle of the 'heuristic' optimization method is to first estimate the blank shape using the Inverse Approach, then to compensate the shape error calculated in each node of the blank contour. The 'heuristic' optimization loop is done using a precise incremental code (Abaqus Explicit or Stampack) and, the iterations loop is stopped when the shape errors are within some initially fixed tolerances. The method is tested in the case of a special stamping process where the parts are pressed in one or more steps using a manual press, without blank holder and by the mean of tools having complex shape. The sensitivities of the process parameters regarding the optimal solution are investigated

The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

CERN Multimedia

Maximilien Brice

2004-01-01

For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

Impact of Simulation Technology on Die and Stamping Business

Science.gov (United States)

Stevens, Mark W.

2005-08-01

Over the last ten years, we have seen an explosion in the use of simulation-based techniques to improve the engineering, construction, and operation of GM production tools. The impact has been as profound as the overall switch to CAD/CAM from the old manual design and construction methods. The changeover to N/C machining from duplicating milling machines brought advances in accuracy and speed to our construction activity. It also brought significant reductions in fitting sculptured surfaces. Changing over to CAD design brought similar advances in accuracy, and today's use of solid modeling has enhanced that accuracy gain while finally leading to the reduction in lead time and cost through the development of parametric techniques. Elimination of paper drawings for die design, along with the process of blueprinting and distribution, provided the savings required to install high capacity computer servers, high-speed data transmission lines and integrated networks. These historic changes in the application of CAE technology in manufacturing engineering paved the way for the implementation of simulation to all aspects of our business. The benefits are being realized now, and the future holds even greater promise as the simulation techniques mature and expand. Every new line of dies is verified prior to casting for interference free operation. Sheet metal forming simulation validates the material flow, eliminating the high costs of physical experimentation dependent on trial and error methods of the past. Integrated forming simulation and die structural analysis and optimization has led to a reduction in die size and weight on the order of 30% or more. The latest techniques in factory simulation enable analysis of automated press lines, including all stamping operations with corresponding automation. This leads to manufacturing lines capable of running at higher levels of throughput, with actual results providing the capability of two or more additional strokes per

78 FR 78788 - Nondiscrimination in Programs or Activities Conducted by the United States Department of Agriculture

Science.gov (United States)

2013-12-27

... programs to include religion, sex, age, marital status, familial status, sexual orientation, disability... inclusion of political beliefs will prohibit discrimination consistent with the Food Stamp Act of 1964... political affiliation), and the Secretary of Agriculture's civil rights policy statements. The inclusion of...

Experimental analysis of electro-pneumatic optimization of hot stamping machine control systems with on-delay timer

OpenAIRE

Bankole I. Oladapo; Vincent A. Balogun; Adeyinka O.M. Adeoye; Ige E. Olubunmi; Samuel O. Afolabi

2017-01-01

The sustainability criterion in the manufacturing industries is imperative, especially in the automobile industries. Currently, efforts are being made by the industries to mitigate CO2 emission by the total vehicle weight optimization, machine utilization and resource efficiency. In lieu of this, it is important to understudy the manufacturing machines adopted in the automobile industries. One of such machine is the hot stamping machine that is used for about 35% of the manufacturing operatio...

Changes in sport and physical activity behavior after participation in easily accessible sporting programs.

NARCIS (Netherlands)

Ooms, L.; Veenhof, C.

2014-01-01

Introduction: The Dutch government stimulates sport and physical activity opportunities in the neighborhood to make it easier for people to adopt a physically active lifestyle. Seven National Sports Federations (NSFs) were funded to develop easily accessible sporting programs, targeted at groups

Deterministic transfer of two-dimensional materials by all-dry viscoelastic stamping

International Nuclear Information System (INIS)

Castellanos-Gomez, Andres; Buscema, Michele; Molenaar, Rianda; Singh, Vibhor; Janssen, Laurens; Van der Zant, Herre S J; Steele, Gary A

2014-01-01

The deterministic transfer of two-dimensional crystals constitutes a crucial step towards the fabrication of heterostructures based on the artificial stacking of two-dimensional materials. Moreover, controlling the positioning of two-dimensional crystals facilitates their integration in complex devices, which enables the exploration of novel applications and the discovery of new phenomena in these materials. To date, deterministic transfer methods rely on the use of sacrificial polymer layers and wet chemistry to some extent. Here, we develop an all-dry transfer method that relies on viscoelastic stamps and does not employ any wet chemistry step. This is found to be very advantageous to freely suspend these materials as there are no capillary forces involved in the process. Moreover, the whole fabrication process is quick, efficient, clean and it can be performed with high yield. (letter)

Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

Science.gov (United States)

Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

2016-12-01

Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

Access NASA Satellite Global Precipitation Data Visualization on YouTube

Science.gov (United States)

Liu, Z.; Su, J.; Acker, J. G.; Huffman, G. J.; Vollmer, B.; Wei, J.; Meyer, D. J.

2017-12-01

Since the satellite era began, NASA has collected a large volume of Earth science observations for research and applications around the world. Satellite data at 12 NASA data centers can also be used for STEM activities such as disaster events, climate change, etc. However, accessing satellite data can be a daunting task for non-professional users such as teachers and students because of unfamiliarity of terminology, disciplines, data formats, data structures, computing resources, processing software, programing languages, etc. Over the years, many efforts have been developed to improve satellite data access, but barriers still exist for non-professionals. In this presentation, we will present our latest activity that uses the popular online video sharing web site, YouTube, to access visualization of global precipitation datasets at the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC). With YouTube, users can access and visualize a large volume of satellite data without necessity to learn new software or download data. The dataset in this activity is the 3-hourly TRMM (Tropical Rainfall Measuring Mission) Multi-satellite Precipitation Analysis (TMPA). The video consists of over 50,000 data files collected since 1998 onwards, covering a zone between 50°N-S. The YouTube video will last 36 minutes for the entire dataset record (over 19 years). Since the time stamp is on each frame of the video, users can begin at any time by dragging the time progress bar. This precipitation animation will allow viewing precipitation events and processes (e.g., hurricanes, fronts, atmospheric rivers, etc.) on a global scale. The next plan is to develop a similar animation for the GPM (Global Precipitation Measurement) Integrated Multi-satellitE Retrievals for GPM (IMERG). The IMERG provides precipitation on a near-global (60°N-S) coverage at half-hourly time interval, showing more details on precipitation processes and development, compared to the 3

Nowcasting and Forecasting the Monthly Food Stamps Data in the US Using Online Search Data

Science.gov (United States)

Fantazzini, Dean

2014-01-01

We propose the use of Google online search data for nowcasting and forecasting the number of food stamps recipients. We perform a large out-of-sample forecasting exercise with almost 3000 competing models with forecast horizons up to 2 years ahead, and we show that models including Google search data statistically outperform the competing models at all considered horizons. These results hold also with several robustness checks, considering alternative keywords, a falsification test, different out-of-samples, directional accuracy and forecasts at the state-level. PMID:25369315

Design and management of database using microsoft access program: application in neurointerventional unit

Energy Technology Data Exchange (ETDEWEB)

Hwang, Seon Moon; Jeong, Gyeong Un; Kim, Tae Il; Cha, Ji Hyeon; Pyun, Hae Wook; Woo, Ryu Chang; Kim, Ho Sung; Suh, Dae Chul [University of Ulsan, College of Medicine, Seoul (Korea, Republic of)

2005-10-15

Complex clinical information in cerebral angiointervention unit requires effective management of statistical analysis for the classification of diagnosis and intervention including follow-up data from the interventional treatment. We present an application of Microsoft Access program for the management of patient data in cerebral angiointervention unit which suggests practical methods in recording and analyzing the patient data. Since January 2002, patient information from cerebral angiointervention was managed by a database with over 4000 patients. We designed a program which incorporates size items; Table, Query, Form, Report, Page and Macro. Patient data, follow-up data and information regarding diagnosis and intervention were established in the Form section, related by serial number, and connected to each other to an independent Table. Problems in running the program were corrected by establishing Entity Relationship (ER) diagnosis of Tables to define relationships between Tables. Convenient Queries, Forms and Reports were created to display expected information were applied from selected Tables. The relationship program which incorporated six items conveniently provided the number of cases per year, incidence of disease, lesion site, and case analysis based on interventional treatment. We were able to follow the patients after the interventional procedures by creating queries and reports. Lists of disease and patients files were identified easily each time by the Macro function. In addition, product names, size and characteristics of materials used were indexed and easily available. Microsoft Access program is effective in the management of patient data in cerebral angiointervention unit. Accumulation of large amounts of complex data handled by multiple users may require client/sever solutions such as a Microsoft SQL Server.

77 FR 17070 - Medicare and Medicaid Programs; Application From Det Norske Veritas Healthcare (DNVHC) for...

Science.gov (United States)

2012-03-23

... for persons wishing to retain a proof of filing by stamping in and retaining an extra copy of the... accrediting body's approved program would be deemed to have met the Medicare conditions. A national... the national accrediting body making the request, describing the nature of the request, and providing...

ABOUT THE RELATIONSHIP BETWEEN THE ISSUES SIGN OF LANGUAGE SYSTEM AND STAMP OF LANGUAGE SYSTEM DİLİN İŞARET SİSTEMİYLE DİLİN DAMGA SİSTEMİ ARASINDAKİ MESELELERİN İLİŞKİSİ HAKKINDA

Directory of Open Access Journals (Sweden)

Bekmağanbetov ŞANJARHAN

2012-01-01

Full Text Available In this article, it is elaborated that ‘stamp system’ which is considered as one of basic issues of linguistics. Stamps of language and some particular features of these stamps are mentioned. In Turkish consideration, there are dimension, size of stamp and the stamp’s being profound and substantive. In modern linguistics, notion of stamp is used instead of notion znak ‘symbol’ in Russian, and notion sign ‘sign’ in English. In the article, after the explanation of the notion of UP (flat universe emerged with worldly basis, it is made mention that language is all associated with the stamp system(s. Bu makalede, genel dil bilimin temel konularından biri kabul edilen dilin ‘damga sistemi’ üzerinde durulmuştur. Dil damgalarından ve bu damgaların belli özelliklerinden söz edilmiştir. Türk’ün düşüncesinde damganın genişliği, büyüklüğü, derin ve anlamlı oluşu vardır. Çağdaş dil biliminde damga kavramı, Rusçada znak ‘simge’, İngilizcede sign ‘işaret’ kavramının yerine kullanılmaktadır. Makalede, dünyevî temel ile ortaya çıkan UP (âlem daire kavramı açıklandıktan sonra dilin damga/lar sistemi üzerine oturtulduğundan söz edilmiştir.

Assessing Program Efficiency: A Time and Motion Study of the Mental Health Emergency Care — Rural Access Program in NSW Australia

Directory of Open Access Journals (Sweden)

Emily Saurman

2014-07-01

Full Text Available The Mental Health Emergency Care-Rural Access Program (MHEC-RAP is a telehealth solution providing specialist emergency mental health care to rural and remote communities across western NSW, Australia. This is the first time and motion (T&M study to examine program efficiency and capacity for a telepsychiatry program. Clinical services are an integral aspect of the program accounting for 6% of all activities and 50% of the time spent conducting program activities, but half of this time is spent completing clinical paperwork. This finding emphasizes the importance of these services to program efficiency and the need to address variability of service provision to impact capacity. Currently, there is no efficiency benchmark for emergency telepsychiatry programs. Findings suggest that MHEC-RAP could increase its activity without affecting program responsiveness. T&M studies not only determine activity and time expenditure, but have a wider application assessing program efficiency by understanding, defining, and calculating capacity. T&M studies can inform future program development of MHEC-RAP and similar telehealth programs, both in Australia and overseas.

Android Access Control Extension

Directory of Open Access Journals (Sweden)

Anton Baláž

2015-12-01

Full Text Available The main objective of this work is to analyze and extend security model of mobile devices running on Android OS. Provided security extension is a Linux kernel security module that allows the system administrator to restrict program's capabilities with per-program profiles. Profiles can allow capabilities like network access, raw socket access, and the permission to read, write, or execute files on matching paths. Module supplements the traditional Android capability access control model by providing mandatory access control (MAC based on path. This extension increases security of access to system objects in a device and allows creating security sandboxes per application.

Evaluation of an open-access CBT-based Internet program for social anxiety: Patterns of use, retention, and outcomes.

Science.gov (United States)

Dryman, M Taylor; McTeague, Lisa M; Olino, Thomas M; Heimberg, Richard G

2017-10-01

Internet-delivered cognitive-behavioral therapy (ICBT) has been established as both efficacious and effective in reducing symptoms of social anxiety. However, most research has been conducted in controlled settings, and little is known regarding the utility of such programs in an open-access format. The present study examined the use, adherence, and effectiveness of Joyable, an open-access, Internet-delivered, coach-supported CBT-based intervention for social anxiety. Participants were 3,384 registered users (Mage [SD] = 29.82 [7.89]; 54% male) that created an account between 2014 and 2016. Characteristics of use, factors related to attrition and adherence, and within-group outcomes were examined. The primary outcome measure was the Social Phobia Inventory. On average, participants remained in the program for 81.02 days (SD = 60.50), during which they completed 12.14 activities (SD = 11.09) and 1.53 exposures (SD = 3.18). About half (57%) had contact with a coach. Full adherence to the program was achieved by 16% of participants, a rate higher than previously published open-access studies of ICBT. Social anxiety symptoms were significantly reduced for participants that engaged in the program, with medium within-group effects from baseline through the cognitive restructuring module (d = 0.63-0.76) and large effects from baseline through the exposure module (d = 1.40-1.83). Response rates were high (72%). Exposures and coach contact were significant predictors of retention and outcome. This open-access online CBT-based program is effective in reducing social anxiety symptoms and has the potential to extend Internet-based mental health services to socially anxious individuals unwilling or unable to seek face-to-face evidence-based therapy. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

Science.gov (United States)

Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

2017-09-01

During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

TimeSet: A computer program that accesses five atomic time services on two continents

Science.gov (United States)

Petrakis, P. L.

1993-01-01

TimeSet is a shareware program for accessing digital time services by telephone. At its initial release, it was capable of capturing time signals only from the U.S. Naval Observatory to set a computer's clock. Later the ability to synchronize with the National Institute of Standards and Technology was added. Now, in Version 7.10, TimeSet is able to access three additional telephone time services in Europe - in Sweden, Austria, and Italy - making a total of five official services addressable by the program. A companion program, TimeGen, allows yet another source of telephone time data strings for callers equipped with TimeSet version 7.10. TimeGen synthesizes UTC time data strings in the Naval Observatory's format from an accurately set and maintained DOS computer clock, and transmits them to callers. This allows an unlimited number of 'freelance' time generating stations to be created. Timesetting from TimeGen is made feasible by the advent of Becker's RighTime, a shareware program that learns the drift characteristics of a computer's clock and continuously applies a correction to keep it accurate, and also brings .01 second resolution to the DOS clock. With clock regulation by RighTime and periodic update calls by the TimeGen station to an official time source via TimeSet, TimeGen offers the same degree of accuracy within the resolution of the computer clock as any official atomic time source.

Intellectual property rights vs. public access rights: ethical aspects of the DeCSS decryptation program

Directory of Open Access Journals (Sweden)

Robert Vaagan

2005-01-01

Full Text Available Introduction. In 1999-2000, a Norwegian youth cracked a DVD-access code and published a decryptation program on the Internet. He was sued by the US DVD Copy Control Association (DVD-CCA and the Norwegian Motion Picture Association (MAP, allies of the US Motion Picture Association of America (MPAA, arrested by Norwegian police and charged with data crime. Two Norwegian court rulings in 2003 unanimously ruled that the program did not amount to a breach of Norwegian law, and he was fully acquitted. In the US, there have been related cases, some with other outcomes. Method. Based on a theoretical framework developed by Zwass, the paper discusses these court rulings and the wider issues of intellectual property rights versus public access rights. Analysis. The DVD-Jon case illustrates that intellectual property rights can conflict with public access rights, as the struggle between proprietary software and public domain software, as well as the SPARC and Open Archives Initiative reflect. Results. An assessment of the DVD-Jon case based on the Zwass framework does not give a clear information ethics answer. The analysis depends on whether one ascribes to consequentialist (e.g., utilitarian or de-ontological reflection, and also on which side of the digital gap is to be accorded most weight. Conclusion. While copyright interests are being legally strengthened, there may be ethically- grounded access rights that outweigh property rights.

77 FR 4564 - Request for Information Regarding the Reinsurance Program Under the Affordable Care Act

Science.gov (United States)

2012-01-30

...? 12. What COIs could arise for such potential subcontractors? Data Collection 13. Describe current... comments in the CMS drop slots located in the main lobby of the building. A stamp- in clock is available... reinsurance program. Section 1321(c)(1) of the Affordable Care Act directs the Secretary to take such actions...

78 FR 60304 - Information Collection Request Sent to the Office of Management and Budget (OMB) for Approval...

Science.gov (United States)

2013-10-01

...; Electronic Duck Stamp Program AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice; request for... and products that bear stamp images are also popular collector items. The Electronic Duck Stamp Act of... issuance of an electronic stamp. Description of the process the State will use to account for and transfer...

Fabrication of a Ni nano-imprint stamp for an anti-reflective layer using an anodic aluminum oxide template.

Science.gov (United States)

Park, Eun-Mi; Lim, Seung-Kyu; Ra, Senug-Hyun; Suh, Su-Jung

2013-11-01

Aluminum anodizing can alter pore diameter, density distribution, periodicity and layer thickness in a controlled way. Because of this property, porous type anodic aluminum oxide (AAO) was used as a template for nano-structure fabrication. The alumina layer generated at a constant voltage increased the pore size from 120 nm to 205 nm according to an increasing process time from 60 min to 150 min. The resulting fabricated AAO templates had pore diameters at or less than 200 nm. Ni was sputtered as a conductive layer onto this AAO template and electroplated using DC and pulse power. Comparing these Ni stamps, those generated from electroplating using on/reverse/off pulsing had an ordered pillar array and maintained the AAO template morphology. This stamp was used for nano-imprinting on UV curable resin coated glass wafer. Surface observations via electron microscopy showed that the nano-imprinted patterned had the same shape as the AAO template. A soft mold was subsequently fabricated and nano-imprinted to form a moth-eye structure on the glass wafer. An analysis of the substrate transmittance using UV-VIS/NIR spectroscopy showed that the transmittance of the substrate with the moth-eye structure was 5% greater that the non-patterned substrate.

Design and implementation of a nanosecond time-stamping readout system-on-chip for photo-detectors

International Nuclear Information System (INIS)

Anvar, Shebli; Château, Frédéric; Le Provost, Hervé; Louis, Frédéric; Manolopoulos, Konstantinos; Moudden, Yassir; Vallage, Bertrand; Zonca, Eric

2014-01-01

A readout system suitable for a large number of synchronized photo-detection units has been designed. Each unit embeds a specifically designed fully integrated communicating system based on Xilinx FPGA SoC technology. It runs the VxWorks real-time OS and a custom data acquisition software designed within the Ice middleware framework, resulting in a highly flexible, controllable and scalable distributed application. Clock distribution and delay calibration over customized fixed latency gigabit Ethernet links enable synchronous time-stamping of events with nanosecond precision. The implementation of this readout system on several data-collecting units as well as its performances are described

All in One Stop? The Accessibility of Work Support Programs at One-Stop Centers.

Science.gov (United States)

Richer, Elise; Kubo, Hitomi; Frank, Abbey

The accessibility of work support programs at one-stop centers was examined in a study during which 33 telephone directors or managers of one-stop centers in 22 states were interviewed by telephone. The interviews established the existence of extensive differences between one-stop centers from the standpoint of all aspects of their operation,…

Micro-patterned ZnO semiconductors for high performance thin film transistors via chemical imprinting with a PDMS stamp.

Science.gov (United States)

Seong, Kieun; Kim, Kyongjun; Park, Si Yun; Kim, Youn Sang

2013-04-07

Chemical imprinting was conducted on ZnO semiconductor films via a chemical reaction at the contact regions between a micro-patterned PDMS stamp and ZnO films. In addition, we applied the chemical imprinting on Li doped ZnO thin films for high performance TFTs fabrication. The representative micro-patterned Li doped ZnO TFTs showed a field effect mobility of 4.2 cm(2) V(-1) s(-1) after sintering at 300 °C.

Large-area fabrication of patterned ZnO-nanowire arrays using light stamping lithography.

Science.gov (United States)

Hwang, Jae K; Cho, Sangho; Seo, Eun K; Myoung, Jae M; Sung, Myung M

2009-12-01

We demonstrate selective adsorption and alignment of ZnO nanowires on patterned poly(dimethylsiloxane) (PDMS) thin layers with (aminopropyl)siloxane self-assembled monolayers (SAMs). Light stamping lithography (LSL) was used to prepare patterned PDMS thin layers as neutral passivation regions on Si substrates. (3-Aminopropyl)triethoxysilane-based SAMs were selectively formed only on regions exposing the silanol groups of the Si substrates. The patterned positively charged amino groups define and direct the selective adsorption of ZnO nanowires with negative surface charges in the protic solvent. This procedure can be adopted in automated printing machines that generate patterned ZnO-nanowire arrays on large-area substrates. To demonstrate its usefulness, the LSL method was applied to prepare ZnO-nanowire transistor arrays on 4-in. Si wafers.

Access Customized Forms

OpenAIRE

Cosma Emil; Jeflea Victor

2010-01-01

By using Word, Excel or PowerPoint one can automate routine operations using the VBA language (Visual Basic for Applications). This language is also used in Access, allowing access to data stored in tables or queries. Thus, Access and VBA resources can be used together. Access is designed for programming forms and reports (among other things), so there won’t be found any of the VBA editor’s specific forms.

Integrated Stamping Simulation Using State Of The Art Techniques To Fulfill Quality Assessment Requirements

International Nuclear Information System (INIS)

Ling, David; Lambriks, Marc; El Khaldi, Fouad

2005-01-01

The last few years have seen the use of stamping simulation evolve to the extent that it is now a mainstream activity; a core part of the press tool engineering process. Now, new requirements for the use of challenging materials like Dual phase / Complex phase steel, VHSS, and aluminum, together with more stringent quality expectations, and shorter development cycles, there is a need to assess the panel quality in a wider context, before committing to tool manufacture.The integrated approach from ESI Group allows early up-front feasibility assessment, geometry and process optimization, and detailed process validation all within one system. Rapid die design and quick forming simulation modules play an essential role in the early stages of the process. A seamless connection between simulation and geometry is a vital characteristic, with the accurate simulation being used to validate and fine tune the process in order to assess final component quality in unprecedented detail, utilizing some of the most accurate material models available today. The combination of the distributed memory processing (DMP) solver together with new cost effective cluster based compute servers provide a practical solution to the problems of 'one million element' model sizes, and more sophisticated modeling methodologies become realistic for the first time.It is no longer sufficient to merely focus on the draw die, forming simulation must now consider the entire die line up. Typically, around half of forming issues arise from the draw die, so the time has now come to address the other half as well! This paper will discuss how the PAM-STAMP 2G TM integrated solution is successfully used to deliver a positive business impact, by providing virtual panel quality assessment, tolerance control, and springback compensation. The paper will also discuss how other forming processes can be accurately modeled using the new modules

Charter Halibut Limited Access Program

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This limited access system limits the number of charter vessels that may participate in the guided sport fishery for halibut in area 2C and 3A. NMFS issues a charter...

Study of mechanical properties on powdermetalurgy aluminium matrix composites fabricated by stamping or extrusion

International Nuclear Information System (INIS)

Busquets, D.; Gomez, L.; Amigo, V.; Salvador-Moya, M. D.

2005-01-01

We have developed composite materials from AA6061 aluminium alloy powders used as matrix and ceramics powders of boron carbide, silicon carbide and boron nitride, used as reinforcements in 2.5, 5.0, 7.5 and 10% vol. by mechanical mixing and milling in planetary mill at 360 rpm vial velocity for 4 h followed of hot stamping and extrusion process on green compacts. Mechanical properties obtained from tensile tests are influenced by the heat treatment, reinforcement fractions and nature. Moreover, these mechanical characteristic are dependent from the processing route. Optical and Scanning Electron Microscopy analysis revealed the microstructure of materials and let describe the tripartite relation; structure-processing-properties, of the developed materials. (Author) 20 refs

76 FR 19356 - Video Programming and Accessibility Advisory Committee; Announcement of Date of Next Meeting

Science.gov (United States)

2011-04-07

... you will need and tell us how to contact you if we need more information. Make your request as early...-418-2498 (voice), 202-418-1169 (TTY), or [email protected] (e-mail); or Alison Neplokh, Media Bureau... or digital broadcast television; accessible user interfaces on video programming devices; and...

Individual- and area-level disparities in access to the road network, subway system and a public bicycle share program on the Island of Montreal, Canada.

Science.gov (United States)

Fuller, Daniel; Gauvin, Lise; Kestens, Yan

2013-02-01

Few studies have examined potential disparities in access to transportation infrastructures, an important determinant of population health. To examine individual- and area-level disparities in access to the road network, public transportation system, and a public bicycle share program in Montreal, Canada. Examining associations between sociodemographic variables and access to the road network, public transportation system, and a public bicycle share program, 6,495 adult respondents (mean age, 48.7 years; 59.0 % female) nested in 33 areas were included in a multilevel analysis. Individuals with lower incomes lived significantly closer to public transportation and the bicycle share program. At the area level, the interaction between low-education and low-income neighborhoods showed that these areas were significantly closer to public transportation and the bicycle share program controlling for individual and urbanicity variables. More deprived areas of the Island of Montreal have better access to transportation infrastructure than less-deprived areas.

7 CFR 277.2 - Definitions.

Science.gov (United States)

2010-01-01

... property usable for the purpose for which it was acquired. Ancillary charges such as taxes, duty... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM PAYMENTS OF CERTAIN ADMINISTRATIVE COSTS OF STATE AGENCIES... as patents, inventions and copyrights. Program means both the Food Stamp Program and the Food...

Vascular Access in Children

International Nuclear Information System (INIS)

Krishnamurthy, Ganesh; Keller, Marc S.

2011-01-01

Establishment of stable vascular access is one of the essential and most challenging procedures in a pediatric hospital. Many clinical specialties provide vascular service in a pediatric hospital. At the top of the “expert procedural pyramid” is the pediatric interventional radiologist, who is best suited and trained to deliver this service. Growing awareness regarding the safety and high success rate of vascular access using image guidance has led to increased demand from clinicians to provide around-the-clock vascular access service by pediatric interventional radiologists. Hence, the success of a vascular access program, with the pediatric interventional radiologist as the key provider, is challenging, and a coordinated multidisciplinary team effort is essential for success. However, there are few dedicated pediatric interventional radiologists across the globe, and also only a couple of training programs exist for pediatric interventions. This article gives an overview of the technical aspects of pediatric vascular access and provides useful tips for obtaining vascular access in children safely and successfully using image guidance.

Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

Science.gov (United States)

Linke, Bernd M.; Gerber, Thomas; Hatscher, Ansgar; Salvatori, Ilaria; Aranguren, Iñigo; Arribas, Maribel

2018-01-01

Based on 22MnB5 hot stamping steel, three model alloys containing 0.5, 0.8, and 1.5 wt pct Si were produced, heat treated by quenching and partitioning (Q&P), and characterized. Aided by DICTRA calculations, the thermal Q&P cycles were designed to fit into industrial hot stamping by keeping partitioning times ≤ 30 seconds. As expected, Si increased the amount of retained austenite (RA) stabilized after final cooling. However, for the intermediate Si alloy the heat treatment exerted a particularly pronounced influence with an RA content three times as high for the one-step process compared to the two-step process. It appeared that 0.8 wt pct Si sufficed to suppress direct cementite formation from within martensite laths but did not sufficiently stabilize carbon-soaked RA at higher temperatures. Tensile and bending tests showed strongly diverging effects of austenite on ductility. Total elongation improved consistently with increasing RA content independently from its carbon content. In contrast, the bending angle was not impacted by high-carbon RA but deteriorated almost linearly with the amount of low-carbon RA.

Can free open access resources strengthen knowledge-based emerging public health priorities, policies and programs in Africa?

Science.gov (United States)

Tambo, Ernest; Madjou, Ghislaine; Khayeka-Wandabwa, Christopher; Tekwu, Emmanuel N; Olalubi, Oluwasogo A; Midzi, Nicolas; Bengyella, Louis; Adedeji, Ahmed A; Ngogang, Jeanne Y

2016-01-01

Tackling emerging epidemics and infectious diseases burden in Africa requires increasing unrestricted open access and free use or reuse of regional and global policies reforms as well as timely communication capabilities and strategies. Promoting, scaling up data and information sharing between African researchers and international partners are of vital importance in accelerating open access at no cost. Free Open Access (FOA) health data and information acceptability, uptake tactics and sustainable mechanisms are urgently needed. These are critical in establishing real time and effective knowledge or evidence-based translation, proven and validated approaches, strategies and tools to strengthen and revamp health systems.  As such, early and timely access to needed emerging public health information is meant to be instrumental and valuable for policy-makers, implementers, care providers, researchers, health-related institutions and stakeholders including populations when guiding health financing, and planning contextual programs.

Newborn access and care in a health attention program

Directory of Open Access Journals (Sweden)

Poliana Remundini de Lima

2016-03-01

Full Text Available A cross-sectional study aimed to describe the access and integrality of attention to children before one year old, born between January of 2010 and December of 2012 in a Brazilian city, in a newborn attention program. From the 24.560 children, 55.0% were users of the Unified Health System (SUS; 10.1% children presented low weight at birth; 6,332 (46.9% children received BCG vaccine at the nursing consultation day; 13,590 (79.5% children had neonatal screening being less than seven days old; 17,035 (69.4% children were vaccinated for Hepatitis B at birth. Within SUS users, 68% of children went to nursing consultation at their first week of life and, 37.8% went to a medical consultation being 10 days old. The study presents information of care after birth at the primary healthcare as potential instrument to coordinate assistance to this clientele.

Increasing access to evidence-based smoking cessation treatment: effectiveness of a free nicotine patch program among Chinese immigrants.

Science.gov (United States)

Shelley, Donna; Nguyen, Nam; Peng, Cha-Hui; Chin, Margaret; Chang, Ming-der; Fahs, Marianne

2010-04-01

Pharmacotherapy substantially increases smoking cessation rates. However, programs to reduce barriers to this evidence-based treatment may not improve access among high risk immigrant non English speaking populations. This study estimates the effectiveness of a tailored free nicotine patch (NRT) program among Chinese American smokers living in New York City (NYC). Between July 2004 and May 2005 NRT was distributed to 375 smokers through two community-based organizations that serve the Asian American population in NYC. Participants completed an in person baseline survey and a 4-month follow-up telephone survey. Using an intention to treat analysis the abstinence rate at 4 months was 26.7% (100/375). Predictors of cessation included higher levels of self efficacy at baseline, not smoking while using the patch and concern about personal health risks. Distribution through easy to access, culturally competent local community organizations increased the reach of a free nicotine patch program and assisted smokers in quitting.

Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization

Directory of Open Access Journals (Sweden)

He Bin

2016-01-01

Full Text Available In order to optimize the layout of the conformal cooling channels in hot stamping tools, a response surface methodology and multi-objective optimization technique are proposed. By means of an Optimal Latin Hypercube experimental design method, a design matrix with 17 factors and 50 levels is generated. Three kinds of design variables, the radius Rad of the cooling channel, the distance H from the channel center to tool work surface and the ratio rat of each channel center, are optimized to determine the layout of cooling channels. The average temperature and temperature deviation of work surface are used to evaluate the cooling performance of hot stamping tools. On the basis of the experimental design results, quadratic response surface models are established to describe the relationship between the design variables and the evaluation objectives. The error analysis is performed to ensure the accuracy of response surface models. Then the layout of the conformal cooling channels is optimized in accordance with a multi-objective optimization method to find the Pareto optimal frontier which consists of some optimal combinations of design variables that can lead to an acceptable cooling performance.

Springback Prediction, Compensation and Correlation for Automotive Stamping

International Nuclear Information System (INIS)

Xu Siguang; Zhao Kunmin; Lanker, Terry; Zhang, Jimmy; Wang, C.T.

2005-01-01

To reduce weight and increase fuel efficiency and safety, more and more automotive sheet stamping parts are being made of aluminum and high strength steels. Forming of such materials encounters not just reduced formability but also dimensional quality problems. Springback prediction accuracy and compensation effectiveness have been the major challenge to die development, construction and tryout. In this paper, the factors that affect the accuracy of springback prediction are discussed, which includes the effect of material models, the selection of element size, and the contact algorithms. Springback predictions of several automotive aluminum and high strength panels are compared with measurement data. The examples show that the prediction correlates with measurement data in both springback trend and magnitude. The effect of springback on final product can be reduced or eliminated through process control and die face compensation. The process control method involves finding the root causes of springback and eliminating them through process modification. The geometrical compensation of die surface is a direct way to eliminate the springback effect. The global scaling compensation method is normally limited to parts with relatively small springback. For large springback and twisting, a new approach is discussed, which takes into account of the effect of deformation and springback history. The compensation is achieved iteratively by solving a system of non-linear equations. Production dies were cut to the compensated surface, which shows that the die compensation is an efficient way to reduce springback-induced geometry deviation

Verification of human actions in SBO sequences with LOCA stamps in Westinghouse PWRs

International Nuclear Information System (INIS)

Queral, C.; Mena Rosell, L.; Jimenez Varas, G.

2013-01-01

The Fukushima accident has shown the need for tools and methodologies able to analyze human activities and / or capabilities of portable systems that has given the Spanish plants as a result of the stress tests . In this work we have applied the methodology of integrated safety analysis developed by the CSN , to SBO sequences with LOCA stamp. The aim is to show a methodology for testing the performances of the Emergency Operating Procedures and Guides Severe Accident Management. The simulations were performed with the tool SCAIS coupled to MAAP . The results show that there are human activities that may be beneficial in certain sequences but harmful in others. This type of problem is already known and referred to in the GGAS . However, FSR shows a practical way to check human actions cannot be obtained with other methods.

IDA: An Intelligent Data Access Program

National Research Council Canada - National Science Library

Sagalowicz, Daniel

1977-01-01

.... The first component of LADDER is INLAND (Informal Natural Language Access to Navy Data), which allows the user to ask questions in English about information contained in databases similar to those currently...

Enabling Highly-Scalable Remote Memory Access Programming with MPI-3 One Sided

Directory of Open Access Journals (Sweden)

Robert Gerstenberger

2014-01-01

Full Text Available Modern interconnects offer remote direct memory access (RDMA features. Yet, most applications rely on explicit message passing for communications albeit their unwanted overheads. The MPI-3.0 standard defines a programming interface for exploiting RDMA networks directly, however, it's scalability and practicability has to be demonstrated in practice. In this work, we develop scalable bufferless protocols that implement the MPI-3.0 specification. Our protocols support scaling to millions of cores with negligible memory consumption while providing highest performance and minimal overheads. To arm programmers, we provide a spectrum of performance models for all critical functions and demonstrate the usability of our library and models with several application studies with up to half a million processes. We show that our design is comparable to, or better than UPC and Fortran Coarrays in terms of latency, bandwidth and message rate. We also demonstrate application performance improvements with comparable programming complexity.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

Science.gov (United States)

Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

2010-07-01

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

Energy Technology Data Exchange (ETDEWEB)

Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

2010-07-21

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

International Nuclear Information System (INIS)

Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

2010-01-01

Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

Availability and accessibility of subsidized mammogram screening program in peninsular Malaysia: A preliminary study using travel impedance approach.

Science.gov (United States)

Mahmud, Aidalina; Aljunid, Syed Mohamed

2018-01-01

Access to healthcare is essential in the pursuit of universal health coverage. Components of access are availability, accessibility (spatial and non-spatial), affordability and acceptability. Measuring spatial accessibility is common approach to evaluating access to health care. This study aimed to determine the availability and spatial accessibility of subsidised mammogram screening in Peninsular Malaysia. Availability was determined from the number and distribution of facilities. Spatial accessibility was determined using the travel impedance approach to represent the revealed access as opposed to potential access measured by other spatial measurement methods. The driving distance of return trips from the respondent's residence to the facilities was determined using a mapping application. The travel expenditure was estimated by multiplying the total travel distance by a standardised travel allowance rate, plus parking fees. Respondents in this study were 344 breast cancer patients who received treatment at 4 referral hospitals between 2015 and 2016. In terms of availability, there were at least 6 major entities which provided subsidised mammogram programs. Facilities with mammogram involved with these programs were located more densely in the central and west coast region of the Peninsula. The ratio of mammogram facility to the target population of women aged 40-74 years ranged between 1: 10,000 and 1:80,000. In terms of accessibility, of the 3.6% of the respondents had undergone mammogram screening, their mean travel distance was 53.4 km (SD = 34.5, range 8-112 km) and the mean travel expenditure was RM 38.97 (SD = 24.00, range RM7.60-78.40). Among those who did not go for mammogram screening, the estimated travel distance and expenditure had a skewed distribution with median travel distance of 22.0 km (IQR 12.0, 42.0, range 2.0-340.0) and the median travel cost of RM 17.40 (IQR 10.40, 30.00, range 3.40-240.00). Higher travel impedance was noted among those who

An evaluation of the availability, accessibility, and quality of online content of vascular surgery training program websites for residency and fellowship applicants.

Science.gov (United States)

Huang, Bryant Y; Hicks, Taylor D; Haidar, Georges M; Pounds, Lori L; Davies, Mark G

2017-12-01

Vascular surgery residency and fellowship applicants commonly seek information about programs from the Internet. Lack of an effective web presence curtails the ability of programs to attract applicants, and in turn applicants may be unable to ascertain which programs are the best fit for their career aspirations. This study was designed to evaluate the presence, accessibility, comprehensiveness, and quality of vascular surgery training websites (VSTW). A list of accredited vascular surgery training programs (integrated residencies and fellowships) was obtained from four databases for vascular surgery education: the Accreditation Council for Graduate Medical Education, Electronic Residency Application Service, Fellowship and Residency Electronic Interactive Database, and Society for Vascular Surgery. Programs participating in the 2016 National Resident Matching Program were eligible for study inclusion. Accessibility of VSTW was determined by surveying the Accreditation Council for Graduate Medical Education, Electronic Residency Application Service, and Fellowship and Residency Electronic Interactive Database for the total number of programs listed and for the presence or absence of website links. VSTW were analyzed for the availability of recruitment and education content items. The quality of VSTW was determined as a composite of four dimensions: content, design, organization, and user friendliness. Percent agreements and kappa statistics were calculated for inter-rater reliability. Eighty-nine of the 94 fellowship (95%) and 45 of the 48 integrated residencies (94%) programs participating in the 2016 Match had a VSTW. For program recruitment, evaluators found an average of 12 of 32 content items (35.0%) for fellowship programs and an average of 12 of 32 (37%) for integrated residencies. Only 47.1% of fellowship programs (53% integrated residencies) specified the number of positions available for the 2016 Match, 20% (13% integrated residencies) indicated alumni

A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

Science.gov (United States)

Huang, Che-Wei; Huang, Yu-Jie; Lu, Shey-Shi; Lin, Chih-Ting

2012-01-01

A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC) architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm) integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK) wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH) range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

7 CFR 275.6 - Management units.

Science.gov (United States)

2010-01-01

... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM PERFORMANCE REPORTING SYSTEM Management Evaluation (ME... management unit; (iii) Food Stamp Program participation, including the number of persons and number of... 7 Agriculture 4 2010-01-01 2010-01-01 false Management units. 275.6 Section 275.6 Agriculture...

Access Denied! Contrasting Data Access in the United States and Ireland

Directory of Open Access Journals (Sweden)

Grogan Samuel

2016-07-01

Full Text Available The ability of an Internet user to access data collected about himself as a result of his online activity is a key privacy safeguard. Online, data access has been overshadowed by other protections such as notice and choice. This paper describes attitudes about data access. 873 US and Irish Internet users participated in a survey designed to examine views on data access to information held by online companies and data brokers. We observed low levels of awareness of access mechanisms along with a high desire for access in both participant groups. We tested three proposed access systems in keeping with industry programs and regulatory proposals. User response was positive. We conclude that access remains an important privacy protection that is inadequately manifested in practice. Our study provides insight for lawmakers and policymakers, as well as computer scientists who implement these systems.

Value-Based Payment Reform and the Medicare Access and Children's Health Insurance Program Reauthorization Act of 2015: A Primer for Plastic Surgeons.

Science.gov (United States)

Squitieri, Lee; Chung, Kevin C

2017-07-01

In 2015, the U.S. Congress passed the Medicare Access and Children's Health Insurance Program Reauthorization Act, which effectively repealed the Centers for Medicare and Medicaid Services sustainable growth rate formula and established the Centers for Medicare and Medicaid Services Quality Payment Program. The Medicare Access and Children's Health Insurance Program Reauthorization Act represents an unparalleled acceleration toward value-based payment models and a departure from traditional volume-driven fee-for-service reimbursement. The Quality Payment Program includes two paths for provider participation: the Merit-Based Incentive Payment System and Advanced Alternative Payment Models. The Merit-Based Incentive Payment System pathway replaces existing quality reporting programs and adds several new measures to create a composite performance score for each provider (or provider group) that will be used to adjust reimbursed payment. The advanced alternative payment model pathway is available to providers who participate in qualifying Advanced Alternative Payment Models and is associated with an initial 5 percent payment incentive. The first performance period for the Merit-Based Incentive Payment System opens January 1, 2017, and closes on December 31, 2017, and is associated with payment adjustments in January of 2019. The Centers for Medicare and Medicaid Services estimates that the majority of providers will begin participation in 2017 through the Merit-Based Incentive Payment System pathway, but aims to have 50 percent of payments tied to quality or value through Advanced Alternative Payment Models by 2018. In this article, the authors describe key components of the Medicare Access and Children's Health Insurance Program Reauthorization Act to providers navigating through the Quality Payment Program and discuss how plastic surgeons may optimize their performance in this new value-based payment program.

Use of the Performance Diagnostic Checklist to Select an Intervention Designed to Increase the Offering of Promotional Stamps at Two Sites of a Restaurant Franchise

Science.gov (United States)

Rodriguez, Manuel; Wilder, David A.; Therrien, Kelly; Wine, Byron; Miranti, Reylissa; Daratany, Kenneth; Salume, Gloria; Baranovsky, Greg; Rodriquez, Matias

2006-01-01

The performance diagnostic checklist (PDC) was administered to examine the variables influencing the offering of promotional stamps by employees at two sites of a restaurant franchise. PDC results suggested that a lack of appropriate antecedents, equipment and processes, and consequences were responsible for the deficits. Based on these results,…

Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

Science.gov (United States)

Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

2017-11-08

A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

76 FR 26927 - National Organic Program; Notice on the Ruminant Slaughter Stock Provision of the Access to...

Science.gov (United States)

2011-05-10

... commenters requested that the NOP facilitate a means to obtain organic certification and grass-fed..., can elect to pursue claims, such as grass-fed, in addition to and separate from organic certification...-11-07] National Organic Program; Notice on the Ruminant Slaughter Stock Provision of the Access to...

7 CFR 281.2 - Administration.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Administration. 281.2 Section 281.2 Agriculture... FOOD STAMP AND FOOD DISTRIBUTION PROGRAM ADMINISTRATION OF THE FOOD STAMP PROGRAM ON INDIAN RESERVATIONS § 281.2 Administration. (a) Qualification. (1) The appropriate ITO of an established Indian...

50 CFR 648.60 - Sea scallop area access program requirements.

Science.gov (United States)

2010-10-01

... subsequent fishing year. For example, a vessel that terminates an Elephant Trunk Access Area trip on December...) Elephant Trunk Access Area. For the 2010 fishing year, the observer set-aside for the Elephant Trunk Access... Area. For the 2010 fishing year, the research set-aside for the Elephant Trunk Access Area is 277,060...

Finite element analysis and optimization of process parameters during stamp forming of composite materials

International Nuclear Information System (INIS)

Venkatesan, S; Kalyanasundaram, S

2010-01-01

In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

A general dead-time correction method based on live-time stamping. Application to the measurement of short-lived radionuclides.

Science.gov (United States)

Chauvenet, B; Bobin, C; Bouchard, J

2017-12-01

Dead-time correction formulae are established in the general case of superimposed non-homogeneous Poisson processes. Based on the same principles as conventional live-timed counting, this method exploits the additional information made available using digital signal processing systems, and especially the possibility to store the time stamps of live-time intervals. No approximation needs to be made to obtain those formulae. Estimates of the variances of corrected rates are also presented. This method is applied to the activity measurement of short-lived radionuclides. Copyright © 2017 Elsevier Ltd. All rights reserved.

The reduction of irregularities in the use of “process fmea”: a study for a cold stamping process

Directory of Open Access Journals (Sweden)

Carla Estorilio

2011-12-01

Full Text Available The Failure Mode and Effect Analysis (FMEA is a requirement for ISO/TS 16949. However, researches show nonconformities in its use by automotive suppliers. The objective of this study is to identify these nonconformities, aiming to suggest methods for minimizing this problem. Therefore, questionnaires were applied in seven automotive suppliers and, for each one, ten FMEA`s were analysed. The research identified nonconformities in the use of FMEA for the stamping process and highlighted seven influencing factors. Based on this data, a strategy is suggested. A partially parameterised FMEA spreadsheet is suggested and tested in three suppliers, showing significant improvements.

Ecological and environmental data as under-utilized national resources: results of the TIE/ACCESS program

Energy Technology Data Exchange (ETDEWEB)

Armentano, T.V.; Loucks, O.L.

1979-06-01

The goal of The Institute of Energy (TIE) 1977 to 1979 ACCESS program was to define the national need for ecological and environmental data and the extent to which present data documentation and archiving are meeting this need. The principal steps focussed on current data documentation and research in government, private and academic sectors of the natural science technical community, particularly as they bear on the accessibility of environmental data to secondary users. The extent to which existing data services are satisfying the needs of data users also was emphasized. The results indicate that the potential contributions which existing data and models could make are not being achieved because of inconsistencies in data documentation, inadequate communication between data suppliers and data users, and a lack of overall coordination of the data bases in national research and monitoring programs. A nationally coordinated network is proposed which focuses on regional data centers and ties together the hierarchy of data bases (national, state, and local) with the broad spectrum of potential users. The network concept includes immediate development of a comprehensive catalog of data resources in each region, with later production of a data abstract journal as one of two methods for communicating between regional and local data centers and the user community.

Applying the Theory of Diffusion of Innovations to Understand Electronic Benefit Transfer Technology Adoption at Mid-West Farmers Markets

Science.gov (United States)

Hasin, Afroza

2016-01-01

The Supplemental Nutrition Assistance Program (SNAP, previously "food stamps"), is the nation's largest federal entitlement nutritional assistance program which assists individuals and households living below the federal poverty level in order to reduce the amount of money they spend on food. With the conversion of food stamps coupons to…

A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

Directory of Open Access Journals (Sweden)

Chih-Ting Lin

2012-08-01

Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

A workplace intervention program and the increase in HIV knowledge, perceived accessibility and use of condoms among young factory workers in Thailand.

Science.gov (United States)

Chamratrithirong, Aphichat; Ford, Kathleen; Punpuing, Sureeporn; Prasartkul, Pramote

2017-12-01

Vulnerability to Human Immunodeficiency Virus (HIV) infection among factory workers is a global problem. This study investigated the effectiveness of an intervention to increase AIDS knowledge, perceived accessibility to condoms and condom use among young factory workers in Thailand. The intervention was a workplace program designed to engage the private sector in HIV prevention. A cross-sectional survey conducted in 2008 to measure program outcomes in factories in Thailand was used in this study. The workplace intervention included the development of policies for management of HIV-positive employees, training sessions for managers and workers, and distribution of educational materials and condoms. A multi-level analysis was used to investigate the effect of HIV/AIDS prevention program components at the workplace on HIV/AIDS knowledge, perceived accessibility to condoms and condom use with regular sexual partners among 699 young factory workers (aged 18-24 years), controlling for their individual socio-demographic characteristics. Interventions related to the management and services component including workplace AIDS policy formulation, condom services programs and behavioral change campaigns were found to be significantly related to increased AIDS knowledge, perceived accessibility to condoms and condom use with regular partners. The effect of the HIV/AIDS training for managers, peer leaders and workers was positive but not statistically significant. With some revision of program components, scaling up of workplace interventions and the engagement of the private sector in HIV prevention should be seriously considered.

Open versus Controlled-Access Data | Office of Cancer Genomics

Science.gov (United States)

OCG employs stringent human subjects’ protection and data access policies to protect the privacy and confidentiality of the research participants. Depending on the risk of patient identification, OCG programs data are available to the scientific community in two tiers: open or controlled access. Both types of data can be accessed through its corresponding OCG program-specific data matrix or portal. Open-access Data

Correlates of Access to Business Research Databases

Science.gov (United States)

Gottfried, John C.

2010-01-01

This study examines potential correlates of business research database access through academic libraries serving top business programs in the United States. Results indicate that greater access to research databases is related to enrollment in graduate business programs, but not to overall enrollment or status as a public or private institution.…

Lessons learned from a data-driven college access program: The National College Advising Corps.

Science.gov (United States)

Horng, Eileen L; Evans, Brent J; Antonio, Anthony L; Foster, Jesse D; Kalamkarian, Hoori S; Hurd, Nicole F; Bettinger, Eric P

2013-01-01

This chapter discusses the collaboration between a national college access program, the National College Advising Corps (NCAC), and its research and evaluation team at Stanford University. NCAC is currently active in almost four hundred high schools and through the placement of a recent college graduate to serve as a college adviser provides necessary information and support for students who may find it difficult to navigate the complex college admission process. The advisers also conduct outreach to underclassmen in an effort to improve the school-wide college-going culture. Analyses include examination of both quantitative and qualitative data from numerous sources and partners with every level of the organization from the national office to individual high schools. The authors discuss balancing the pursuit of evaluation goals with academic scholarship. In an effort to benefit other programs seeking to form successful data-driven interventions, the authors provide explicit examples of the partnership and present several examples of how the program has benefited from the data gathered by the evaluation team. © WILEY PERIODICALS, INC.

"Utstein style" spreadsheet and database programs based on Microsoft Excel and Microsoft Access software for CPR data management of in-hospital resuscitation.

Science.gov (United States)

Adams, Bruce D; Whitlock, Warren L

2004-04-01

In 1997, The American Heart Association in association with representatives of the International Committee on Resuscitation (ILCOR) published recommended guidelines for reviewing, reporting and conducting in-hospital cardiopulmonary resuscitation (CPR) outcomes using the "Utstein style". Using these guidelines, we developed two Microsoft Office based database management programs that may be useful to the resuscitation community. We developed a user-friendly spreadsheet based on MS Office Excel. The user enters patient variables such as name, age, and diagnosis. Then, event resuscitation variables such as time of collapse and CPR team arrival are entered from a "code flow sheet". Finally, outcome variables such as patient condition at different time points are recorded. The program then makes automatic calculations of average response times, survival rates and other important outcome measurements. Also using the Utstein style, we developed a database program based on MS Office Access. To promote free public access to these programs, we established at a website. These programs will help hospitals track, analyze, and present their CPR outcomes data. Clinical CPR researchers might also find the programs useful because they are easily modified and have statistical functions.

An Analysis of Naval Officer Accession Programs

National Research Council Canada - National Science Library

Lehner, William D

2008-01-01

... Training Corps, and Officer Candidate School. Three areas are covered: historical patterns in officer accessions and historical changes in Navy pre-commissioning training and education philosophy and policy...

Access to major overseas research facilities

International Nuclear Information System (INIS)

Bolderman, J. W.

1997-01-01

This paper will describe four schemes which have been established to permit Australian researchers access to some of the most advanced overseas research facilities. These include, access to Major Research Facilities Program, the Australian National Beamline Facility at the Photon Factory, the Australian Synchrotron Research Program and the ISIS Agreement. The details of each of these programs is discussed and the statistics on the scientific output provided. All programs are managed on behalf of the Department of Industry, Science and Tourism by the Australian Nuclear Science and Technology Organisation. One hundred and thirteen senior scientists plus forty, one postgraduate, students were supported through these schemes during the 1996-1997 financial year

Using the fibre structure of paper to determine authenticity of the documents: analysis of transmitted light images of stamps and banknotes.

Science.gov (United States)

Takalo, Jouni; Timonen, Jussi; Sampo, Jouni; Rantala, Maaria; Siltanen, Samuli; Lassas, Matti

2014-11-01

A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Home Delivery Medicament Program: access, inactivity and cardiovascular risk.

Science.gov (United States)

Araújo, Roque da Silva; Arcuri, Edna Apparecida Moura; Lopes, Victor Cauê

2016-10-10

to verify causes of inactivity in the Home Delivery Medicament Program, as referred by users from a Primary Health Care Service in São Paulo, comparing them to the causes registered in the program and analyzing them in the theoretical model Concept of Access to Health. cross-sectional study, interviewing 111 inactive users; and documentary study in the program records. half of the users did not know the condition of inactivity. Discrepancies were found between the user's and the program's information, observing different levels of agreement: Absence of physician and administrative staff member 0%; Transfer to other service 25%; Death 50%; Option to quit 50%; Address change 57% and Change in therapeutic schedule 80%. The users' feeling of accepting the program was observed. In the health access concept, inactivity can be explained in the information dimension, in the degree of asymmetry between the patient's and the health professional's knowledge, identified through the indicators: education, knowledge and information sources. due to the low education level, the user does not assimilate the information on the steps of the program flowchart, does not return for the assessment that guarantees its continuity. Consequently, (s)he stops receiving the medication and spends a long time without treatment, increasing the cardiovascular risk of hypertensive (92% of the sample), diabetic (44%) and dyslipidemic patients (31%). verificar causas de inatividade no Programa Remédio em Casa, referidas por usuários de Unidade Básica de Saúde de São Paulo, comparando-as às registradas pelo programa e analisando-as no modelo teórico Conceito de Acesso à Saúde. estudo transversal entrevistando 111 usuários inativos; e documental, nos registros do programa. metade dos usuários desconhecia a condição de inatividade. Constatadas discrepâncias nas informações usuário versus programa, observando-se diferentes níveis de concordância: Falta de médico e funcion

Some Programs Should Not Run on Laptops - Providing Programmatic Access to Applications Via Web Services

Science.gov (United States)

Gupta, V.; Gupta, N.; Gupta, S.; Field, E.; Maechling, P.

2003-12-01

hosted these Web Services as a part of the SCEC Community Modeling Environment (SCEC/CME) ITR Project (http://www.scec.org/cme). We have implemented Web Services for several of the reasons sited previously. For example, we implemented a FORTRAN-based Earthquake Rupture Forecast (ERF) as a Web Service for use by client computers that don't support a FORTRAN runtime environment. We implemented a Generic Mapping Tool (GMT) Web Service for use by systems that don't have local access to GMT. We implemented a Hazard Map Calculator Web Service to execute Hazard calculations that are too computationally intensive to run on a local system. We implemented a Coordinate Conversion Web Service to enforce a standard and consistent method for converting between UTM and Lat/Lon. Our experience developing these services indicates both strengths and weakness in current Web Service technology. Client programs that utilize Web Services typically need network access, a significant disadvantage at times. Programs with simple input and output parameters were the easiest to implement as Web Services, while programs with complex parameter-types required a significant amount of additional development. We also noted that Web services are very data-oriented, and adapting object-oriented software into the Web Service model proved problematic. Also, the Web Service approach of converting data types into XML format for network transmission has significant inefficiencies for some data sets.

Learning to Thrive: Building Diverse Scientists’ Access to Community and Resources through the BRAINS Program

Science.gov (United States)

Margherio, Cara; Horner-Devine, M. Claire; Mizumori, Sheri J. Y.; Yen, Joyce W.

2016-01-01

BRAINS: Broadening the Representation of Academic Investigators in NeuroScience is a National Institutes of Health–funded, national program that addresses challenges to the persistence of diverse early-career neuroscientists. In doing so, BRAINS aims to advance diversity in neuroscience by increasing career advancement and retention of post-PhD, early-career neuroscientists from underrepresented groups (URGs). The comprehensive professional development program is structured to catalyze conversations specific to URGs in neuroscience and explicitly addresses factors known to impact persistence such as a weak sense of belonging to the scientific community, isolation and solo status, inequitable access to resources that impact career success, and marginalization from informal networks and mentoring relationships. While we do not yet have data on the long-term impact of the BRAINS program on participants’ career trajectory and persistence, we introduce the BRAINS program theory and report early quantitative and qualitative data on shorter-term individual impacts within the realms of career-advancing behaviors and career experiences. These early results suggest promising, positive career productivity, increased self-efficacy, stronger sense of belonging, and new perspectives on navigating careers for BRAINS participants. We finish by discussing recommendations for future professional development programs and research designed to broaden participation in the biomedical and life sciences. PMID:27587858

SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

Directory of Open Access Journals (Sweden)

Alexandre Reis

2008-01-01

Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

Access to major overseas research facilities

Energy Technology Data Exchange (ETDEWEB)

Bolderman, J. W. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

1997-12-31

This paper will describe four schemes which have been established to permit Australian researchers access to some of the most advanced overseas research facilities. These include, access to Major Research Facilities Program, the Australian National Beamline Facility at the Photon Factory, the Australian Synchrotron Research Program and the ISIS Agreement. The details of each of these programs is discussed and the statistics on the scientific output provided. All programs are managed on behalf of the Department of Industry, Science and Tourism by the Australian Nuclear Science and Technology Organisation. One hundred and thirteen senior scientists plus forty, one postgraduate, students were supported through these schemes during the 1996-1997 financial year. 1 fig.

Higher Prices, Fewer Choices: Shopping for Food in Rural America.

Science.gov (United States)

Morris, Patricia McGrath

The Food Stamp Program is the U.S. government's primary program to prevent the rural poor from going hungry. Food stamp allotments are set each year based on the cost of the "Thrifty Food Plan" (TFP), a minimally adequate diet defined by the U.S. Department of Agriculture (USDA), which sets costs by examining average food prices in urban…

Development of USPS Laboratory and pilot-scale testing protocols

Science.gov (United States)

Carl Houtman; Nancy Ross Sutherland; David Bormett; Donald Donermeyer

2000-01-01

The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp adhesives that can be removed by unit operations found in recycling mills. The maintenance of final product quality specifications for a recycling mill while loading the feedstock with a significant quantity of adhesive is the criterion for success of this program...

Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

Directory of Open Access Journals (Sweden)

Mu Zhou

2014-01-01

Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

75 FR 4409 - Ryan White HIV/AIDS Program Part D-Coordinated HIV Services and Access to Research for Women...

Science.gov (United States)

2010-01-27

... HIV/AIDS Program Part D--Coordinated HIV Services and Access to Research for Women, Infants, Children... Orange County Health Department, Orlando, Florida, that will ensure continuity of Part D HIV/AIDS care and treatment services without disruption to HIV/ AIDS-infected women, infants and children in Orange...

Implementing a Healthy Food Distribution Program: A Supply Chain Strategy to Increase Fruit and Vegetable Access in Underserved Areas.

Science.gov (United States)

DeFosset, Amelia R; Kwan, Allison; Rizik-Baer, Daniel; Gutierrez, Luis; Gase, Lauren N; Kuo, Tony

2018-05-24

Increasing access to fresh produce in small retail venues could improve the diet of people in underserved communities. However, small retailers face barriers to stocking fresh produce. In 2014, an innovative distribution program, Community Markets Purchasing Real and Affordable Foods (COMPRA), was launched in Los Angeles with the aim of making it more convenient and profitable for small retailers to stock fresh produce. Our case study describes the key processes and lessons learned in the first 2 years of implementing COMPRA. Considerable investments in staff capacity and infrastructure were needed to launch COMPRA. Early successes included significant week-to-week increases in the volume of produce distributed. Leveraging partnerships, maintaining a flexible operational and funding structure, and broadly addressing store owners' needs contributed to initial gains. We describe key challenges and next steps to scaling the program. Lessons learned from implementing COMPRA could inform other jurisdictions considering supply-side approaches to increase access to healthy food.

Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process

Science.gov (United States)

Ou, Hang; Zhang, Xu; Xu, Junrui; Li, Guangyao; Cui, Junjia

2018-03-01

A novel design and manufacturing method, dubbed "precast," of the cooling system and tools for a hot forming process was proposed in this paper. The integrated structures of the punch and blank holder were determined by analyzing the bending and reverse-bending deformation of the forming parts. The desired crashworthiness performance of an automotive front bumper constructed with this process was obtained by a tailored phase transformation, which generated martensite-bainite in the middle and full martensite transformation in the corner areas. Varying cooling effects in the formed parts caused the highest temperature to be located in the bottom and the lowest on the end of the formed parts. Moreover, the microstructural distributions demonstrated that the bottom possessed a relatively lower content of martensite, while, conversely, the end possessed a higher content. This was precisely the most desired phase distributions for the hot formed parts. For the six-process cycle stamping, the temperatures reached a stable status after an initial rapid increase in the first three process cycles. The microstructural results verified the feasibility of the hot forming tools under multiprocess cycles.

ATLAS Barrel Hadron Calorimeter: general manufacturing concepts for 300000 absorber plates mass production

International Nuclear Information System (INIS)

Alikov, B.A.; Budagov, Yu.A.; Bylinkin, P.M

1998-01-01

We summarize a 4-year (1994-1997) experience of design and research efforts which led us to the solution of 2 important tasks of a principal significance for precision assembly of one of major elements of ATLAS, - its Hadron Barrel Tile Calorimeter. These tasks were: - to develop the high tolerances (50-100 microns) technology for about 300000 units of calorimeter nuclear absorber plates mass production, - to choose the best manufacturer(s) able to satisfy shop drawings demands in a reasonable balance with some other significant criteria: production period, price acceptable geography location (transport expenses), available storage area and access ways, reliable quality control etc. For the best absorbers producers our final choice was the TATRA PLANT (Czech Republic) for 1.6 m long plates stamping (40800 units) with Argonne punching die and the MINSK TRACTOR PLANT (Belarus Republic) for smaller size plates stamping (about 240000 units). We exclude noticeable (more than 1% of the day production) tolerances violations by the specially developed QUALITY CONTROL Program

Micromechanics-based modeling of stress–strain and fracture behavior of heat-treated boron steels for hot stamping process

Energy Technology Data Exchange (ETDEWEB)

Srithananan, P.; Kaewtatip, P.; Uthaisangsuk, V., E-mail: vitoon.uth@kmutt.ac.th

2016-06-14

In the automotive industry, hot stamped parts with tailored properties have shown advantageous safety performance. Such components are produced by applying different heat treatment conditions after forming for different zones in order to obtain various combinations of hard and soft microstructures. In this work, pure martensitic, pure bainitic, and three martensitic/bainitic phase microstructures were initially generated from the boron steel grade 22MnB5 by a two-step quenching procedure in which different holding times in the bainitic temperature range were varied. Increased phase fraction of bainite due to longer holding time led to decreased yield and tensile strength; however, elongation and resulting energy absorbability became significantly higher. To describe mechanical properties and failure behavior of hot stamped parts containing multiphase microstructures, influences of microstructure characteristics should be considered on the micro-scale. Using modeling, 2-D representative volume elements (RVE) were generated from observed real microstructures and flow curves of the individual single phases were defined, taking into account a dislocation theory based model and local chemical compositions. Then, effective stress–strain curves of the heat-treated boron steels were calculated by using the isostrain and non-isostrain methods and compared with tensile test results. Regarding fracture behavior, damage curves of fully martensitic and bainitic structures were determined by means of tensile tests of different notched samples and a hybrid digital image correlation (DIC)–finite element (FE) approach. 2-D RVE simulations of a martensite/bainite mixture were carried out under various states of stress, in which the obtained damage curves were individually applied for each phase. The predicted damage curve from RVE simulations for two-phase boron steel fairly agreed with experimental fracture strains. Moreover, correspondingly normalized Lode angle could be

Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

Energy Technology Data Exchange (ETDEWEB)

Tang, Bingtao, E-mail: tbtsh@hotmail.com [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China); Yuan, Zhengjun; Cheng, Gang [School of Mechanical and Electronic Engineering, Shandong Jianzhu University, Jinan 250101 (China); Huang, Lili; Zheng, Wei [School of Materials Science and Engineering, Shandong Jianzhu University, Shandong, Jinan 250101 (China); Xie, Hui [State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Hunan, Changsha 410082 (China)

2013-11-15

Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well.

Experimental verification of tailor welded joining partners for hot stamping and analytical modeling of TWBs rheological constitutive in austenitic state

International Nuclear Information System (INIS)

Tang, Bingtao; Yuan, Zhengjun; Cheng, Gang; Huang, Lili; Zheng, Wei; Xie, Hui

2013-01-01

Hot stamping of quenchable ultra high strength steels currently represents a standard forming technology in the automotive industry for the manufacture of safety and crash relevant components. Recently, hot stamping of Tailor-Welded Blanks (TWBs) is proposed to meet the environmental and safety requirements by supplying car structural body components with functionally optimized and tailored mechanical properties. In this paper, an appropriate partner material for the quenchenable boron steel B1500HS based on the phase transformation and deformation behavior under process relevant conditions is determined. It is generally accepted that the mechanical properties for joint partner after quenching process should meet the following requirements. The value of yield strength (YS) should be between 350 and 500 MPa. The ultimate tensile strength (UTS) should be within the limits of 500–650 MPa, and the total elongation (TEL) until rupture should be higher than 13%. Two kinds of High Strength Low Alloy (HSLA) cold rolled steels B340LA and B410LA are chosen for verification of which one is appropriate as joint partner. Microhardness is measured and metallographic is investigated on different base materials and corresponding weld seams. It is pointed out that the B340LA steel is an appropriate joint partner with ideal thermal and mechanical properties. An optimized Arrhenius constitutive law is implemented to improve the characterization and description of the mechanical properties of the base and joint partner, as well as the weld seam in austenitic state. The comparisons with simplified Hensel–Spittel constitutive model show the optimized Arrhenius constitutive law describes the experimental data fairly well

Marginalized Student Access to Technology Education

Science.gov (United States)

Kurtcu, Wanda M.

The purpose of this paper is to investigate how a teacher can disrupt an established curriculum that continues the cycle of inequity of access to science, technology, engineering, and math (STEM) curriculum by students in alternative education. For this paper, I will focus on the technology components of the STEM curriculum. Technology in the United States, if not the world economy, is developing at a rapid pace. Many areas of day to day living, from applying for a job to checking one's bank account online, involve a component of science and technology. The 'gap' in technology education is emphasized between the 'haves and have-nots', which is delineated along socio-economic lines. Marginalized students in alternative education programs use this equipment for little else than remedial programs and credit recovery. This level of inequity further widens in alternative education programs and affects the achievement of marginalized students in credit recovery or alternative education classes instead of participation technology classes. For the purposes of this paper I focus on how can I decrease the inequity of student access to 21st century technology education in an alternative education program by addressing the established curriculum of the program and modifying structural barriers of marginalized student access to a technology focused curriculum.

Youth Voucher Program in Madagascar Increases Access to Voluntary Family Planning and STI Services for Young People.

Science.gov (United States)

Burke, Eva; Gold, Judy; Razafinirinasoa, Lalaina; Mackay, Anna

2017-03-24

Young people often express a preference for seeking family planning information and services from the private sector. However, in many Marie Stopes International (MSI) social franchise networks, the proportion of young clients, and particularly those under 20 years of age, remains low. Marie Stopes Madagascar (MSM) piloted a youth voucher program that joins a supply-side intervention-youth-friendly social franchisee training and quality monitoring-with a corresponding demand-side-component, free vouchers that reduce financial barriers to family planning access for young people. Young people identified by MSM's community health educators (CHEs) received a free voucher redeemable at a BlueStar social franchisee for a package of voluntary family planning and sexually transmitted infection (STI) information and services. BlueStar social franchisees-private providers accredited by MSM-are reimbursed for the cost of providing these services. We reviewed service statistics data from the first 18 months of the youth voucher program, from July 2013 to December 2014, as well as client demographic profile data from July 2015. Findings: Between July 2013 and December 2014, 58,417 vouchers were distributed to young people by CHEs through a range of community mobilization efforts, of which 43,352 (74%) were redeemed for family planning and STI services. Most clients (78.5%) chose a long-acting reversible contraceptive (LARC), and just over half (51%) of young people benefited from STI counseling as part of their voucher service. Most (78%) services were provided in the Analamanga region (the capital and its surroundings), which was expected given the population density in this region and the high concentration of BlueStar franchisees. The client profile data snapshot from July 2015 revealed that 69% of voucher clients had never previously used a contraceptive method, and 96% of clients were aged 20 or younger, suggesting that the voucher program is successfully reaching the

Youth Voucher Program in Madagascar Increases Access to Voluntary Family Planning and STI Services for Young People

Science.gov (United States)

Burke, Eva; Gold, Judy; Razafinirinasoa, Lalaina; Mackay, Anna

2017-01-01

ABSTRACT Background: Young people often express a preference for seeking family planning information and services from the private sector. However, in many Marie Stopes International (MSI) social franchise networks, the proportion of young clients, and particularly those under 20 years of age, remains low. Marie Stopes Madagascar (MSM) piloted a youth voucher program that joins a supply-side intervention—youth-friendly social franchisee training and quality monitoring—with a corresponding demand-side-component, free vouchers that reduce financial barriers to family planning access for young people. Methods: Young people identified by MSM's community health educators (CHEs) received a free voucher redeemable at a BlueStar social franchisee for a package of voluntary family planning and sexually transmitted infection (STI) information and services. BlueStar social franchisees—private providers accredited by MSM—are reimbursed for the cost of providing these services. We reviewed service statistics data from the first 18 months of the youth voucher program, from July 2013 to December 2014, as well as client demographic profile data from July 2015. Findings: Between July 2013 and December 2014, 58,417 vouchers were distributed to young people by CHEs through a range of community mobilization efforts, of which 43,352 (74%) were redeemed for family planning and STI services. Most clients (78.5%) chose a long-acting reversible contraceptive (LARC), and just over half (51%) of young people benefited from STI counseling as part of their voucher service. Most (78%) services were provided in the Analamanga region (the capital and its surroundings), which was expected given the population density in this region and the high concentration of BlueStar franchisees. The client profile data snapshot from July 2015 revealed that 69% of voucher clients had never previously used a contraceptive method, and 96% of clients were aged 20 or younger, suggesting that the voucher

Increasing Access for Economically Disadvantaged Students: The NSF/CSEM & S-STEM Programs at Louisiana State University

Science.gov (United States)

Wilson, Zakiya S.; Iyengar, Sitharama S.; Pang, Su-Seng; Warner, Isiah M.; Luces, Candace A.

2012-10-01

Increasing college degree attainment for students from disadvantaged backgrounds is a prominent component of numerous state and federal legislation focused on higher education. In 1999, the National Science Foundation (NSF) instituted the "Computer Science, Engineering, and Mathematics Scholarships" (CSEMS) program; this initiative was designed to provide greater access and support to academically talented students from economically disadvantaged backgrounds. Originally intended to provide financial support to lower income students, this NSF program also advocated that additional professional development and advising would be strategies to increase undergraduate persistence to graduation. This innovative program for economically disadvantaged students was extended in 2004 to include students from other disciplines including the physical and life sciences as well as the technology fields, and the new name of the program was Scholarships for Science, Technology, Engineering and Mathematics (S-STEM). The implementation of these two programs in Louisiana State University (LSU) has shown significant and measurable success since 2000, making LSU a Model University in providing support to economically disadvantaged students within the STEM disciplines. The achievement of these programs is evidenced by the graduation rates of its participants. This report provides details on the educational model employed through the CSEMS/S-STEM projects at LSU and provides a path to success for increasing student retention rates in STEM disciplines. While the LSU's experience is presented as a case study, the potential relevance of this innovative mentoring program in conjunction with the financial support system is discussed in detail.

The impact of threshold language assistance programming on the accessibility of mental health services for persons with limited English proficiency in the Medi-Cal setting.

Science.gov (United States)

McClellan, Sean R; Wu, Frances M; Snowden, Lonnie R

2012-06-01

Title VI of the 1964 Civil Rights Act prohibits federal funds recipients from providing care to limited English proficiency (LEP) persons more limited in scope or lower in quality than care provided to others. In 1999, the California Department of Mental Health implemented a "threshold language access policy" to meet its Title VI obligations. Under this policy, Medi-Cal agencies must provide language assistance programming in a non-English language where a county's Medical population contains either 3000 residents or 5% speakers of that language. We examine the impact of threshold language policy-required language assistance programming on LEP persons' access to mental health services by analyzing the county-level penetration rate of services for Russian, Spanish, and Vietnamese speakers across 34 California counties, over 10 years of quarterly data. Exploiting a time series with nonequivalent control group study design, we studied this phenomena using linear regression with random county effects to account for trends over time. Threshold language policy-required assistance programming led to an immediate and significant increase in the penetration rate of mental health services for Russian (8.2, P language speaking persons. Threshold language assistance programming was effective in increasing mental health access for Russian and Vietnamese, but not for Spanish-speaking LEP persons.

Safety and efficacy results of the advanced renal cell carcinoma sorafenib expanded access program in North America.

Science.gov (United States)

Stadler, Walter M; Figlin, Robert A; McDermott, David F; Dutcher, Janice P; Knox, Jennifer J; Miller, Wilson H; Hainsworth, John D; Henderson, Charles A; George, Jeffrey R; Hajdenberg, Julio; Kindwall-Keller, Tamila L; Ernstoff, Marc S; Drabkin, Harry A; Curti, Brendan D; Chu, Luis; Ryan, Christopher W; Hotte, Sebastien J; Xia, Chenghua; Cupit, Lisa; Bukowski, Ronald M

2010-03-01

The Advanced Renal Cell Carcinoma Sorafenib (ARCCS) program made sorafenib available to patients with advanced renal cell carcinoma (RCC) before regulatory approval. In this nonrandomized, open-label expanded access program, 2504 patients from the United States and Canada were treated with oral sorafenib 400 mg twice daily. Safety and efficacy were explored overall and in subgroups of patients including those with no prior therapy, nonclear cell (nonclear cell) RCC, brain metastases, prior bevacizumab treatment, and elderly patients. Sorafenib was approved for RCC 6 months after study initiation, at which time patients with no prior therapy or with nonclear cell RCC could enroll in an extension protocol for continued assessment for a period of 6 months. The most common grade > or =2 drug-related adverse events were hand-foot skin reaction (18%), rash (14%), hypertension (12%), and fatigue (11%). In the 1891 patients evaluable for response, complete response was observed in 1 patient, partial response in 67 patients (4%), and stable disease for at least 8 weeks in 1511 patients (80%). Median progression-free survival in the extension population was 36 weeks (95% confidence interval [CI], 33-45 weeks; censorship rate, 56%); median overall survival in the entire population was 50 weeks (95% CI, 46-52 weeks; censorship rate, 63%). The efficacy and safety results were similar across the subgroups. Sorafenib 400 mg twice daily demonstrated activity and a clinically acceptable toxicity profile in all patient subsets enrolled in the ARCCS expanded access program (clinicaltrials.gov identifier: NCT00111020).

Doula Services Within a Healthy Start Program: Increasing Access for an Underserved Population.

Science.gov (United States)

Thomas, Mary-Powel; Ammann, Gabriela; Brazier, Ellen; Noyes, Philip; Maybank, Aletha

2017-12-01

Women of color in the United States, particularly in high-poverty neighborhoods, experience high rates of poor birth outcomes, including cesarean section, preterm birth, low birthweight, and infant mortality. Doula care has been linked to improvements in many perinatal outcomes, but women of color and low-income women often face barriers in accessing doula support. To address this issue, the New York City Department of Health and Mental Hygiene's Healthy Start Brooklyn introduced the By My Side Birth Support Program in 2010. The goal was to complement other maternal home-visiting programs by providing doula support during labor and birth, along with prenatal and postpartum visits. Between 2010 and 2015, 489 infants were born to women enrolled in the program. Data indicate that By My Side is a promising model of support for Healthy Start projects nationwide. Compared to the project area, program participants had lower rates of preterm birth (6.3 vs. 12.4%, p < 0.001) and low birthweight (6.5 vs. 11.1%, p = 0.001); however, rates of cesarean birth did not differ significantly (33.5 vs. 36.9%, p = 0.122). Further research is needed to explore possible reasons for this finding, and to examine the influence of doula support on birth outcomes among populations with high rates of chronic disease and stressors such as poverty, racism, and exposure to violence. However, feedback from participants indicates that doula support is highly valued and helps give women a voice in consequential childbirth decisions. Available evidence suggests that doula services may be an important component of an effort to address birth inequities.

Connecting people with cancer to physical activity and exercise programs: a pathway to create accessibility and engagement.

Science.gov (United States)

Mina, D Santa; Sabiston, C M; Au, D; Fong, A J; Capozzi, L C; Langelier, D; Chasen, M; Chiarotto, J; Tomasone, J R; Jones, J M; Chang, E; Culos-Reed, S N

2018-04-01

Recent guidelines concerning exercise for people with cancer provide evidence-based direction for exercise assessment and prescription for clinicians and their patients. Although the guidelines promote exercise integration into clinical care for people with cancer, they do not support strategies for bridging the guidelines with related resources or programs. Exercise program accessibility remains a challenge in implementing the guidelines, but that challenge might be mitigated with conceptual frameworks ("pathways") that connect patients with exercise-related resources. In the present paper, we describe a pathway model and related resources that were developed by an expert panel of practitioners and researchers in the field of exercise and rehabilitation in oncology and that support the transition from health care practitioner to exercise programs or services for people with cancer. The model acknowledges the nuanced distinctions between research and exercise programming, as well as physical activity promotion, that, depending on the available programming in the local community or region, might influence practitioner use. Furthermore, the pathway identifies and provides examples of processes for referral, screening, medical clearance, and programming for people after a cancer diagnosis. The pathway supports the implementation of exercise guidelines and should serve as a model of enhanced care delivery to increase the health and well-being of people with cancer.

Connecting people with cancer to physical activity and exercise programs: a pathway to create accessibility and engagement

Science.gov (United States)

Mina, D. Santa; Sabiston, C.M.; Au, D.; Fong, A.J.; Capozzi, L.C.; Langelier, D.; Chasen, M.; Chiarotto, J.; Tomasone, J.R.; Jones, J.M.; Chang, E.; Culos-Reed, S.N.

2018-01-01

Recent guidelines concerning exercise for people with cancer provide evidence-based direction for exercise assessment and prescription for clinicians and their patients. Although the guidelines promote exercise integration into clinical care for people with cancer, they do not support strategies for bridging the guidelines with related resources or programs. Exercise program accessibility remains a challenge in implementing the guidelines, but that challenge might be mitigated with conceptual frameworks (“pathways”) that connect patients with exercise-related resources. In the present paper, we describe a pathway model and related resources that were developed by an expert panel of practitioners and researchers in the field of exercise and rehabilitation in oncology and that support the transition from health care practitioner to exercise programs or services for people with cancer. The model acknowledges the nuanced distinctions between research and exercise programming, as well as physical activity promotion, that, depending on the available programming in the local community or region, might influence practitioner use. Furthermore, the pathway identifies and provides examples of processes for referral, screening, medical clearance, and programming for people after a cancer diagnosis. The pathway supports the implementation of exercise guidelines and should serve as a model of enhanced care delivery to increase the health and well-being of people with cancer. PMID:29719431

Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

Directory of Open Access Journals (Sweden)

Dong Y.

2015-01-01

Full Text Available In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tribological behaviour of aluminium differed great from that of steel regardless of the counterpart material. Highly reactive aluminium had a strong tendency to solder with tool surfaces during dry sliding. However, the lubricity of gray cast irons can be significantly improved by Ni-BN and DLC coatings. The coefficient of friction reduced from about 0.5 for untreated cast irons to about 0.2 sliding against aluminium. Duplex treatment combining plasma nitrocarburising with low-friction coatings showed superior durability than both DLC and Ni-BN coatings.

Tribological performances of new steel grades for hot stamping tools

Science.gov (United States)

Medea, F.; Venturato, G.; Ghiotti, A.; Bruschi, S.

2017-09-01

In the last years, the use of High Strength Steels (HSS) as structural parts in car body-in-white manufacturing has rapidly increased thanks to their favourable strength-to-weight ratio and stiffness, which allow a reduction of the fuel consumption to accommodate the new restricted regulations for CO2 emissions control. The survey of the technical and scientific literature shows a large interest in the development of different coatings for the blanks from the traditional Al-Si up to new Zn-based coatings and on the analysis of hard PVD, CVD coatings and plasma nitriding applied on the tools. By contrast, fewer investigations have been focused on the development and test of new tools steels grades capable to improve the wear resistance and the thermal properties that are required for the in-die quenching during forming. On this base, the paper deals with the analysis and comparison the tribological performances in terms of wear, friction and heat transfer of new tool steel grades for high-temperature applications, characterized by a higher thermal conductivity than the commonly used tools. Testing equipment, procedures as well as measurements analyses to evaluate the friction coefficient, the wear and heat transfer phenomena are presented. Emphasis is given on the physical simulation techniques that were specifically developed to reproduce the thermal and mechanical cycles on the metal sheets and dies as in the industrial practice. The reference industrial process is the direct hot stamping of the 22MnB5 HSS coated with the common Al-Si coating for automotive applications.

Identification of a process window for tailored carburization of sheet metals in hot stamping

Science.gov (United States)

Horn, Alexander; Merklein, Marion

2018-05-01

Due to governmental regulations concerning the reduction of CO2 emissions and increasing safety standards, hot stamping of high strength boron manganese steel sheets has evolved into a state of the art process for manufacturing structural car body parts. The combined forming and in-die quenching process enables the formation of a fully martensitic microstructure. Therefore, press hardened steels offer high strength, but low ductility. In order to further improve passenger safety, a tailored configuration of mechanical properties is desired. Besides state of the art methods, like the application of locally different heat treatment temperatures or varying quenching rates, the adjustment of mechanical properties of sheet metals by a tailored carburization is a novel approach. For the carburization process, the specimens are first coated with graphite and subsequently heat treated. Within this contribution, different coating strategies as well as heat treatment temperatures and dwell times are investigated. For the determination of a process window, mechanical properties such as tensile strength and microhardness will be analyzed and correlated with the resulting microstructure.

45 CFR 98.31 - Parental access.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Parental access. 98.31 Section 98.31 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CHILD CARE AND DEVELOPMENT FUND Program Operations (Child Care Services)-Parental Rights and Responsibilities § 98.31 Parental access. The...

A National Long-term Outcomes Evaluation of U.S. Premedical Postbaccalaureate Programs Designed to Promote Health care Access and Workforce Diversity.

Science.gov (United States)

McDougle, Leon; Way, David P; Lee, Winona K; Morfin, Jose A; Mavis, Brian E; Matthews, De'Andrea; Latham-Sadler, Brenda A; Clinchot, Daniel M

2015-08-01

The National Postbaccalaureate Collaborative (NPBC) is a partnership of Postbaccalaureate Programs (PBPs) dedicated to helping promising college graduates from disadvantaged and underrepresented backgrounds get into and succeed in medical school. This study aims to determine long-term program outcomes by looking at PBP graduates, who are now practicing physicians, in terms of health care service to the poor and underserved and contribution to health care workforce diversity. We surveyed the PBP graduates and a randomly drawn sample of non-PBP graduates from the affiliated 10 medical schools stratified by the year of medical school graduation (1996-2002). The PBP graduates were more likely to be providing care in federally designated underserved areas and practicing in institutional settings that enable access to care for vulnerable populations. The NPBC graduates serve a critical role in providing access to care for underserved populations and serve as a source for health care workforce diversity.

An Efficient Format for Nearly Constant-Time Access to Arbitrary Time Intervals in Large Trace Files

Directory of Open Access Journals (Sweden)

Anthony Chan

2008-01-01

Full Text Available A powerful method to aid in understanding the performance of parallel applications uses log or trace files containing time-stamped events and states (pairs of events. These trace files can be very large, often hundreds or even thousands of megabytes. Because of the cost of accessing and displaying such files, other methods are often used that reduce the size of the tracefiles at the cost of sacrificing detail or other information. This paper describes a hierarchical trace file format that provides for display of an arbitrary time window in a time independent of the total size of the file and roughly proportional to the number of events within the time window. This format eliminates the need to sacrifice data to achieve a smaller trace file size (since storage is inexpensive, it is necessary only to make efficient use of bandwidth to that storage. The format can be used to organize a trace file or to create a separate file of annotations that may be used with conventional trace files. We present an analysis of the time to access all of the events relevant to an interval of time and we describe experiments demonstrating the performance of this file format.

Optimum stamping die structure based on analytical method of die deformation during draw process; Seikei katei no kanagata henkei kaiseki ni motozuku, press kanagata kozo no saitekika

Energy Technology Data Exchange (ETDEWEB)

Nakahara, T; Tamai, H [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

We measured an actual deformation and pressure distribution in draw process of bending cam, and analyzed deformation process of die structure, in order to eliminate adjusting work considering die deformation by stamping force. We studied die structure improvement with simulation based on analytical method. This report describes a sample of die structure improvement based on a simulation and actual measurement. 1 ref., 11 figs., 1 tab.

78 FR 31769 - Accessible Emergency Information; Apparatus Requirements for Emergency Information and Video...

Science.gov (United States)

2013-05-24

... and equipment and better access video programming.'' \\7\\ \\7\\ H.R. Rep. No. 111-563, 111th Cong., 2d... Video Accessibility Act of 2010 (``CVAA''), the Commission adopts rules requiring video programming distributors and video programming providers (including program owners) to make televised emergency information...

Access to Experimental Cancer Drugs

Science.gov (United States)

An experimental drug has been tested in the lab and with animals and approved for testing in people by the FDA, but can’t yet be advertised, sold, or prescribed. Experimental drugs may be available through clinical trials or expanded access programs - learn more about these programs and how to talk to your doctor.

Systems thinking, the Swiss Cheese Model and accident analysis: a comparative systemic analysis of the Grayrigg train derailment using the ATSB, AcciMap and STAMP models.

Science.gov (United States)

Underwood, Peter; Waterson, Patrick

2014-07-01

The Swiss Cheese Model (SCM) is the most popular accident causation model and is widely used throughout various industries. A debate exists in the research literature over whether the SCM remains a viable tool for accident analysis. Critics of the model suggest that it provides a sequential, oversimplified view of accidents. Conversely, proponents suggest that it embodies the concepts of systems theory, as per the contemporary systemic analysis techniques. The aim of this paper was to consider whether the SCM can provide a systems thinking approach and remain a viable option for accident analysis. To achieve this, the train derailment at Grayrigg was analysed with an SCM-based model (the ATSB accident investigation model) and two systemic accident analysis methods (AcciMap and STAMP). The analysis outputs and usage of the techniques were compared. The findings of the study showed that each model applied the systems thinking approach. However, the ATSB model and AcciMap graphically presented their findings in a more succinct manner, whereas STAMP more clearly embodied the concepts of systems theory. The study suggests that, whilst the selection of an analysis method is subject to trade-offs that practitioners and researchers must make, the SCM remains a viable model for accident analysis. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effectiveness of a grant program's efforts to promote synergy within its funded initiatives: perceptions of participants of the Southern Rural Access Program

Science.gov (United States)

Pathman, Donald E; Chuang, Emmeline; Weiner, Bryan J

2008-01-01

Background Foundations and public agencies commonly fund focused initiatives for individual grantees. These discrete, stand-alone initiatives can risk failure by being carried out in isolation. Fostering synergy among grantees' initiatives is one strategy proposed for promoting the success and impact of grant programs. We evaluate an explicit strategy to build synergy within the Robert Wood Johnson Foundation's Southern Rural Access Program (SRAP), which awarded grants to collaboratives within eight southeastern U.S. states to strengthen basic health care services in targeted rural counties. Methods We interviewed 39 key participants of the SRAP, including the program director within each state and the principal subcontractors heading the program's funded initiatives that supported heath professionals' recruitment, retention and training, made loans to health care providers, and built networks among providers. Interews were recorded and transcribed. Two investigators independently coded the transcripts and a third investigator distilled the main points. Results Participants generally perceived that the SRAP yielded more synergies than other grant programs in which they had participated and that these synergies added to the program's impact. The synergies most often noted were achieved through relationship building among grantees and with outside agencies, sharing information and know-how, sharing resources, combining efforts to yield greater capacity, joining voices to advocate for common goals, and spotting gaps in services offered and then filling these gaps. The SRAP's strategies that participants felt fostered synergy included targeting funding to culturally and geographically similar states, supporting complementary types of initiatives, promoting opportunities to network through semi-annual meetings and regular conference calls, and the advocacy efforts of the program's leadership. Participants noted that synergies were sometimes hindered by turf issues and

Effectiveness of a grant program's efforts to promote synergy within its funded initiatives: perceptions of participants of the Southern Rural Access Program

Directory of Open Access Journals (Sweden)

Weiner Bryan J

2008-12-01

Full Text Available Abstract Background Foundations and public agencies commonly fund focused initiatives for individual grantees. These discrete, stand-alone initiatives can risk failure by being carried out in isolation. Fostering synergy among grantees' initiatives is one strategy proposed for promoting the success and impact of grant programs. We evaluate an explicit strategy to build synergy within the Robert Wood Johnson Foundation's Southern Rural Access Program (SRAP, which awarded grants to collaboratives within eight southeastern U.S. states to strengthen basic health care services in targeted rural counties. Methods We interviewed 39 key participants of the SRAP, including the program director within each state and the principal subcontractors heading the program's funded initiatives that supported heath professionals' recruitment, retention and training, made loans to health care providers, and built networks among providers. Interews were recorded and transcribed. Two investigators independently coded the transcripts and a third investigator distilled the main points. Results Participants generally perceived that the SRAP yielded more synergies than other grant programs in which they had participated and that these synergies added to the program's impact. The synergies most often noted were achieved through relationship building among grantees and with outside agencies, sharing information and know-how, sharing resources, combining efforts to yield greater capacity, joining voices to advocate for common goals, and spotting gaps in services offered and then filling these gaps. The SRAP's strategies that participants felt fostered synergy included targeting funding to culturally and geographically similar states, supporting complementary types of initiatives, promoting opportunities to network through semi-annual meetings and regular conference calls, and the advocacy efforts of the program's leadership. Participants noted that synergies were sometimes

Evidence-based policy versus morality policy: the case of syringe access programs.

Science.gov (United States)

de Saxe Zerden, Lisa; O'Quinn, Erin; Davis, Corey

2015-01-01

Evidence-based practice (EBP) combines proven interventions with clinical experience, ethics, and client preferences to inform treatment and services. Although EBP is integrated into most aspects of social work and public health, at times EBP is at odds with social policy. In this article the authors explore the paradox of evidence-based policy using syringe access programs (SAP) as a case example, and review methods of bridging the gap between the emphasis on EBP and lack of evidence informing SAP policy. Analysis includes the overuse of morality policy and examines historical and current theories why this paradox exists. Action steps are highlighted for creating effective policy and opportunities for public health change. Strategies on reframing the problem and shifting target population focus to garner support for evidence-based policy change are included. This interdisciplinary understanding of the way in which these factors converge is a critical first step in moving beyond morality-based policy toward evidence-based policy.

Optimizing data access in the LAMPF control system

International Nuclear Information System (INIS)

Schaller, S.C.; Corley, J.K.; Rose, P.A.

1985-01-01

The LAMPF control system data access software offers considerable power and flexibility to application programs through symbolic device naming and an emphasis on hardware independence. This paper discusses optimizations aimed at improving the performance of the data access software while retaining these capabilities. The only aspects of the optimizations visible to the application programs are ''vector devices'' and ''aggregate devices.'' A vector device accesses a set of hardware related data items through a single device name. Aggregate devices allow run-time optimization of references to groups of unrelated devices. Optimizations not visible on the application level include careful handling of: network message traffic; the sharing of global resources; and storage allocation

25 CFR 170.122 - Can a tribe close a cultural access road?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Can a tribe close a cultural access road? 170.122 Section... ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Use of Irr and Cultural Access Roads § 170.122 Can a tribe close a cultural access road? (a) A tribe with jurisdiction over a cultural...

The Effect of Process and Model Parameters in Temperature Prediction for Hot Stamping of Boron Steel

Directory of Open Access Journals (Sweden)

Chaoyang Sun

2013-01-01

Full Text Available Finite element models of the hot stamping and cold die quenching process for boron steel sheet were developed using either rigid or elastic tools. The effect of tool elasticity and process parameters on workpiece temperature was investigated. Heat transfer coefficient between blank and tools was modelled as a function of gap and contact pressure. Temperature distribution and thermal history in the blank were predicted, and thickness distribution of the blank was obtained. Tests were carried out and the test results are used for the validation of numerical predictions. The effect of holding load and the size of cooling ducts on temperature distribution during the forming and the cool die quenching process was also studied by using two models. The results show that higher accuracy predictions of blank thickness and temperature distribution during deformation were obtained using the elastic tool model. However, temperature results obtained using the rigid tool model were close to those using the elastic tool model for a range of holding load.

25 CFR 170.121 - What is a cultural access road?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is a cultural access road? 170.121 Section 170.121 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Use of Irr and Cultural Access Roads § 170...

25 CFR 170.127 - What terms apply to access roads?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What terms apply to access roads? 170.127 Section 170.127 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Irr Housing Access Roads § 170.127 What...

Students' Motivation to Access Academic Advising Services

Science.gov (United States)

Henning, Marcus A.

2009-01-01

The interrelationships between motivation for choosing a program of study, intention to access academic advisors, academic difficulty, and actual appointments with academic advisors were based on student self-reports of motivation and intentions. In addition, academic achievement measures and data on student access to academic advisors were…

Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

Directory of Open Access Journals (Sweden)

Yuxiong Ji

2017-01-01

Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

NUDAT. System for access to nuclear data. Summary description

International Nuclear Information System (INIS)

Dunford, C.L.; Kinsey, R.R.

1998-01-01

The NUDAT program with its associated database provides access to nuclear properties and some nuclear reaction data. The program has interfaces for WWW, Telnet online access, and PC. The database contains the following information: level and gamma-ray adopted properties from ENSDF; nuclear ground and metastable state properties; radioactive decay radiations from ENSDF; thermal neutron cross sections and resonance integrals as published in 'Neutron Cross Sections', Vol. 1. The online version is accessible through the IAEA's WWW site or through the Telnet online service NDIS, the PC version is available by FTP or on CD-ROM. (author)

Description of a multi-university education and collaborative care child psychiatry access program: New York State's CAP PC.

Science.gov (United States)

Kaye, D L; Fornari, V; Scharf, M; Fremont, W; Zuckerbrot, R; Foley, C; Hargrave, T; Smith, B A; Wallace, J; Blakeslee, G; Petras, J; Sengupta, S; Singarayer, J; Cogswell, A; Bhatia, I; Jensen, P

2017-09-01

Although, child mental health problems are widespread, few get adequate treatment, and there is a severe shortage of child psychiatrists. To address this public health need many states have adopted collaborative care programs to assist primary care to better assess and manage pediatric mental health concerns. This report adds to the small literature on collaborative care programs and describes one large program that covers most of New York state. CAP PC, a component program of New York State's Office of Mental Health (OMH) Project TEACH, has provided education and consultation support to primary care providers covering most of New York state since 2010. The program is uniquely a five medical school collaboration with hubs at each that share one toll free number and work together to provide education and consultation support services to PCPs. The program developed a clinical communications record to track information about all consultations which forms the basis of much of this report. 2-week surveys following consultations, annual surveys, and pre- and post-educational program evaluations have also been used to measure the success of the program. CAP PC has grown over the 6years of the program and has provided 8013 phone consultations to over 1500 PCPs. The program synergistically provided 17,523 CME credits of educational programming to 1200 PCPs. PCP users of the program report very high levels of satisfaction and self reported growth in confidence. CAP PC demonstrates that large-scale collaborative consultation models for primary care are feasible to implement, popular with PCPs, and can be sustained. The program supports increased access to child mental health services in primary care and provides child psychiatric expertise for patients who would otherwise have none. Copyright © 2017. Published by Elsevier Inc.

47 CFR 76.971 - Commercial leased access terms and conditions.

Science.gov (United States)

2010-10-01

... operators that have not satisfied their statutory leased access requirements shall accommodate part-time..., educational and governmental access programming, provided that the operator's franchise agreement requires it... leased commercial channels. Cable operators may impose reasonable insurance requirements on leased access...

Teaching Accessibility Standards to Generation Y Students

Science.gov (United States)

Klitzing, Sandra

2011-01-01

The Americans with Disabilities Act (ADA) of 1990 mandated that facilities and programs are accessible, so people with disabilities can be included in all aspects of community life including recreation (Dattilo, 2002). Understanding accessibility standards is not an easy task. Educators are faced with the challenge of teaching technical content,…

Project Baiterek: A Patient Access Program to Improve Clinical Outcomes and Quality of Life in Children with Type 1 Diabetes in Kazakhstan.

Science.gov (United States)

Muratalina, Aigul; Smith-Palmer, Jayne; Nurbekova, Akmaral; Abduakhassova, Gulmira; Zhubandykova, Leila; Roze, Stéphane; Karamalis, Manolis; Shamshatova, Gulzhakhan; Demessinov, Adi; D'Agostino, Nicola Dunne; Lynch, Peter; Yedigarova, Larisa; Klots, Motty; Valentine, William; Welsh, John; Kaufman, Francine

2015-09-01

Diabetes is a key driver in the rise of noncommunicable diseases globally. It causes expensive and burdensome short- and long-term complications, with both an economic and social impact. In many countries, however, access to care and disease management in type 1 diabetes is suboptimal, increasing the risk for complications. In 2011, Project Baiterek was initiated as a collaborative effort between the Kazakhstan Ministry of Health, industry (Medtronic Plc), local physicians, and the Diabetes Association of the Republic of Kazakhstan to enhance patient access to continuous subcutaneous insulin infusion (CSII) therapy. It was the first countrywide project to provide equity and universal access to insulin pump therapy among children with type 1 diabetes, increasing pump use from zero to two-thirds of this population in less than 3 years. The project also involved instigating longitudinal data collection, and long-term clinical outcomes continue to be monitored. Here, we provide an overview of the clinical, quality-of-life, and economic outcomes to date associated with providing CSII therapy to children with type 1 diabetes in Kazakhstan. Initial clinical data show that CSII therapy improved clinical outcomes and quality of life for patients entered into the program and that CSII therapy was cost-effective relative to multiple daily injection therapy. The positive outcomes of Project Baiterek provide a template for similar patient access programs in other settings, and its framework could be adapted to initiatives to change health care infrastructures and standards of care for other noncommunicable diseases. Copyright © 2015. Published by Elsevier Inc.

Network Access Control For Dummies

CERN Document Server

Kelley, Jay; Wessels, Denzil

2009-01-01

Network access control (NAC) is how you manage network security when your employees, partners, and guests need to access your network using laptops and mobile devices. Network Access Control For Dummies is where you learn how NAC works, how to implement a program, and how to take real-world challenges in stride. You'll learn how to deploy and maintain NAC in your environment, identify and apply NAC standards, and extend NAC for greater network security. Along the way you'll become familiar with what NAC is (and what it isn't) as well as the key business drivers for deploying NAC.Learn the step

Breastfeeding Support in a Community Pharmacy: Improving Access through the Well Babies at Walgreens Program.

Science.gov (United States)

Lenell, Amy; Friesen, Carol A; Hormuth, Laura

2015-11-01

Well Babies at Walgreens is a unique community-based corporate partnership program that offers breastfeeding support by a lactation professional in a private room at the pharmacy. Walgreens is a community pharmacy chain with more than 8000 locations in the United States, Puerto Rico, and the US Virgin Islands. The primary goal of Well Babies is to support breastfeeding women using a model that is expandable to other Walgreens pharmacy sites. The Well Babies program offers drop-in services, with a professional consultation by a lactation consultant and baby weight check, if desired. Well Babies creators are developing a business plan for Walgreens and a toolkit that would help other stores implement the program. An additional goal is to improve continuity of care for breastfeeding by engaging pharmacists as vital members of the health care team. Offering breastfeeding support at a pharmacy improves access and encourages support persons to attend while simultaneously allowing the family to complete other errands. This initiative included education for pharmacists to improve the recommendations they make for breastfeeding mothers and to improve awareness among pharmacists of the benefits associated with breastfeeding and the need to preserve the breastfeeding relationship. The first drop-in location opened in April 2012. Grant funding from the US Centers for Disease Control and Prevention, awarded to the Indiana State Department of Health, made it possible to open a second drop-in location in June 2013. Future plans include developing an employee lactation program and expanding Well Babies at Walgreens at other store locations. © The Author(s) 2015.

75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

Science.gov (United States)

2010-01-29

... the State's Temporary Assistance for Needy Families (TANF) cash assistance or Medicaid programs... is adjusted annually for cost-of-living increases; allow States to simplify the Standard Utility Allowance (SUA) if the State elects to use the SUA rather than actual utility costs for all households...

OPTICA: Our Path Together Initiating Cultural Access. Final Report.

Science.gov (United States)

Jackson, Susan, Comp.

This final report describes the activities and outcomes of OPTICA (Our Path Together Initiating Cultural Access) programs. For each program an information sheet indicates the goal, total participation, status of the goal, and activities of the program. Programs included: (1) Hands On: ASL Creative Story Telling, a program that used children's…

Impacts of the Interim Federal Health Program reforms: A stakeholder analysis of barriers to health care access and provision for refugees.

Science.gov (United States)

Antonipillai, Valentina; Baumann, Andrea; Hunter, Andrea; Wahoush, Olive; O'Shea, Timothy

2017-11-09

Changes to the Interim Federal Health Program (IFHP) in 2012 reduced health care access for refugees and refugee claimants, generating concerns among key stakeholders. In 2014, a new IFHP temporarily reinstated access to some health services; however, little is known about these changes, and more information is needed to map the IFHP's impact. This study explores barriers occurring during the time period of the IFHP reforms to health care access and provision for refugees. A stakeholder analysis, using 23 semi-structured interviews, was conducted to obtain insight into stakeholder perceptions of the 2014 reforms, as well as stakeholders' position and their influence to assess the acceptability of the IFHP changes. The majority of stakeholders expressed concerns about the 2014 IFHP changes as a result of the continuing barriers posed by the 2012 retrenchments and the emergence of new barriers to health care access and provision for refugees. Key barriers identified included lack of communication and awareness, lack of continuity and comprehensive care, negative political discourse and increased costs. A few stakeholders supported the reforms as they represented some, but limited, access to health care. Overall, the reforms to the IFHP in 2014 generated barriers to health care access and provision that contributed to confusion among stakeholders, the transfer of refugee health responsibility to provincial authorities and the likelihood of increased health outcome disparities, as refugees and refugee claimants chose to delay seeking health care. The study recommends that policy-makers engage with refugee health stakeholders to formulate a policy that improves health care provision and access for refugee populations.

A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

CERN Document Server

Doroud, K

2017-01-01

Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

Energy Technology Data Exchange (ETDEWEB)

Doroud, K., E-mail: Katayoun.Doroud@cern.ch [CERN Geneva (Switzerland); Williams, M.C.S. [CERN Geneva (Switzerland); INFN, Bologna (Italy)

2017-03-21

Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

Essential Medicines in Nigeria: Foregrounding Access to Affordable ...

African Journals Online (AJOL)

(EM) given the fact that it established the criterion for medicines classification as well ... AIDS, malaria, tuberculosis, and access to essential medicines. Lancet .... Vaccines, and Health Commodities: Report of the WHO-MSH Consultative Meeting, ... Prepared for the Strategies for Enhancing Access to Medicines Program.

Screening of spontaneous castor bean accesses for genetic ...

African Journals Online (AJOL)

... discriminant power between the castor bean accesses, being the multivariate analysis efficient in this process. The castor bean accesses ACS-001 CRSP and ACS-001-MASP are promising for introduction in genetic improvement programs of this culture. Keywords: Ricinus communis L., genotype, multivariate statistics, ...

Accessibility and content of individualized adult reconstructive hip and knee/musculoskeletal oncology fellowship web sites.

Science.gov (United States)

Young, Bradley L; Cantrell, Colin K; Patt, Joshua C; Ponce, Brent A

2018-06-01

Accessible, adequate online information is important to fellowship applicants. Program web sites can affect which programs applicants apply to, subsequently altering interview costs incurred by both parties and ultimately impacting rank lists. Web site analyses have been performed for all orthopaedic subspecialties other than those involved in the combined adult reconstruction and musculoskeletal (MSK) oncology fellowship match. A complete list of active programs was obtained from the official adult reconstruction and MSK oncology society web sites. Web site accessibility was assessed using a structured Google search. Accessible web sites were evaluated based on 21 previously reported content criteria. Seventy-four adult reconstruction programs and 11 MSK oncology programs were listed on the official society web sites. Web sites were identified and accessible for 58 (78%) adult reconstruction and 9 (82%) MSK oncology fellowship programs. No web site contained all content criteria and more than half of both adult reconstruction and MSK oncology web sites failed to include 12 of the 21 criteria. Several programs participating in the combined Adult Reconstructive Hip and Knee/Musculoskeletal Oncology Fellowship Match did not have accessible web sites. Of the web sites that were accessible, none contained comprehensive information and the majority lacked information that has been previously identified as being important to perspective applicants.

Helium-hydrogen microplasma device (MPD) on postage-stamp-size plastic-quartz chips.

Science.gov (United States)

Weagant, Scott; Karanassios, Vassili

2009-10-01

A new design of a miniaturized, atmospheric-pressure, low-power (e.g., battery-operated), self-igniting, planar-geometry microplasma device (MPD) for use with liquid microsamples is described. The inexpensive MPD was a hybrid, three-substrate quartz-plastic-plastic structure and it was formed on chips with area the size of a small postage stamp. The substrates were chosen for rapid prototyping and for speedy device-geometry testing and evaluation. The approximately 700-microm (diameter) and 7-mm (long) He-H(2) (3% H(2)) microplasma was formed by applying high-voltage ac between two needle electrodes. Operating conditions were found to be critical in sustaining stable microplasma on plastic substrates. Spectral interference from the electrode materials was not observed. A small-size, electrothermal vaporization system was used for introduction of microliter volumes of liquids into the MPD. The microplasma was operated from an inexpensive power supply. And, operation from a 14.4-V battery has been demonstrated. Microplasma background emission in the spectral range between 200 and 850 nm obtained using a portable, fiber-optic spectrometer is reported. Analyte emission from microliter volumes of dilute single-element standard solutions of Cd, Cu, K, Li, Mg, Mn, Na, Pb, and Zn is documented. Element-dependent precision was between 10-25% (the average was 15%) and detection limits ranged between 1.5 and 350 ng. The system was used for the determination of Na in diluted bottled-water samples.

Enhancing Ocean Research Data Access

Science.gov (United States)

Chandler, Cynthia; Groman, Robert; Shepherd, Adam; Allison, Molly; Arko, Robert; Chen, Yu; Fox, Peter; Glover, David; Hitzler, Pascal; Leadbetter, Adam; Narock, Thomas; West, Patrick; Wiebe, Peter

2014-05-01

The Biological and Chemical Oceanography Data Management Office (BCO-DMO) works in partnership with ocean science investigators to publish data from research projects funded by the Biological and Chemical Oceanography Sections and the Office of Polar Programs Antarctic Organisms & Ecosystems Program at the U.S. National Science Foundation. Since 2006, researchers have been contributing data to the BCO-DMO data system, and it has developed into a rich repository of data from ocean, coastal and Great Lakes research programs. While the ultimate goal of the BCO-DMO is to ensure preservation of NSF funded project data and to provide open access to those data, achievement of those goals is attained through a series of related phases that benefits from active collaboration and cooperation with a large community of research scientists as well as curators of data and information at complementary data repositories. The BCO-DMO is just one of many intermediate data management centers created to facilitate long-term preservation of data and improve access to ocean research data. Through partnerships with other data management professionals and active involvement in local and global initiatives, BCO-DMO staff members are working to enhance access to ocean research data available from the online BCO-DMO data system. Continuing efforts in use of controlled vocabulary terms, development of ontology design patterns and publication of content as Linked Open Data are contributing to improved discovery and availability of BCO-DMO curated data and increased interoperability of related content available from distributed repositories. We will demonstrate how Semantic Web technologies (e.g. RDF/XML, SKOS, OWL and SPARQL) have been integrated into BCO-DMO data access and delivery systems to better serve the ocean research community and to contribute to an expanding global knowledge network.

Ethical imperatives against item restriction in the Supplemental Nutrition Assistance Program.

Science.gov (United States)

Chrisinger, Benjamin W

2017-07-01

The Supplemental Nutrition Assistance Program (SNAP, formerly known as food stamps) is the federal government's largest form of food assistance, and a frequent focus of political and scholarly debate. Previous discourse in the public health community and recent proposals in state legislatures have suggested limiting the use of SNAP benefits on unhealthy food items, such as sugar-sweetened beverages (SSBs). This paper identifies two possible underlying motivations for item restriction, health and morals, and analyzes the level of empirical support for claims about the current state of the program, as well as expectations about how item restriction would change participant outcomes. It also assesses how item restriction would reduce individual agency of low-income individuals, and identifies mechanisms by which this may adversely affect program participants. Finally, this paper offers alternative policies to promote healthier purchasing and eating among SNAP participants that can be pursued without reducing individual agency. Health advocates and officials must more fully weigh the attendant risks of implementing SNAP item restrictions, including the reduction of individual agency of a vulnerable population. Copyright © 2017 Elsevier Inc. All rights reserved.

Structural barriers in access to medical marijuana in the USA-a systematic review protocol.

Science.gov (United States)

Valencia, Celina I; Asaolu, Ibitola O; Ehiri, John E; Rosales, Cecilia

2017-08-07

There are 43 state medical marijuana programs in the USA, yet limited evidence is available on the demographic characteristics of the patient population accessing these programs. Moreover, insights into the social and structural barriers that inform patients' success in accessing medical marijuana are limited. A current gap in the scientific literature exists regarding generalizable data on the social, cultural, and structural mechanisms that hinder access to medical marijuana among qualifying patients. The goal of this systematic review, therefore, is to identify the aforementioned mechanisms that inform disparities in access to medical marijuana in the USA. This scoping review protocol outlines the proposed study design for the systematic review and evaluation of peer-reviewed scientific literature on structural barriers to medical marijuana access. The protocol follows the guidelines set forth by the Preferred Reporting Items for Systematic review and Meta-Analysis Protocols (PRISMA-P) checklist. The overarching goal of this study is to rigorously evaluate the existing peer-reviewed data on access to medical marijuana in the USA. Income, ethnic background, stigma, and physician preferences have been posited as the primary structural barriers influencing medical marijuana patient population demographics in the USA. Identification of structural barriers to accessing medical marijuana provides a framework for future policies and programs. Evidence-based policies and programs for increasing medical marijuana access help minimize the disparity of access among qualifying patients.

HIV/AIDS programmes should focus on improved access.

Science.gov (United States)

Manning, A

2000-10-14

This paper discusses the need for HIV/AIDS programs in sub-Saharan countries to focus more on improved access to information to empower poor people living in remote areas. It is noted that despite Glaxo Wellcome's move to reduce the cost of antiretroviral therapy, it is unlikely to have an impact on most of those infected with or affected by HIV/AIDS, since concerns regarding lack of sustainability, bureaucratic administration, and communication difficulties predominate in the country. In this regard, it is therefore recommended that national HIV/AIDS programs be balanced with the needs of both the community and the individual and in prevention and care. Health workers should be explicit in confronting traditional beliefs, such as those about gender roles and traditional medicine, in prevention campaigns. Moreover, there is also an urgent need to improve access to condoms; strengthen health programs such as directly observed treatment short-term (DOTS) courses for tuberculosis and the syndromic approach to sexually transmitted disease treatment; and improve practical support to communities caring for those who are sick and the orphans. Lastly, all partners working with prevention programs should use the more positive community attitudes towards HIV/AIDS issues seen in many sub-Saharan countries to develop evidence-based programs that focus more on improved access and less on sustainability.

INOVASI MEDIA PEMBELAJARAN KEARSIPAN ELECTRONIK ARSIP (E-ARSIP BERBASIS MICROSOFT OFFICE ACCESS

Directory of Open Access Journals (Sweden)

Ahmad Saeroji

2014-12-01

Full Text Available Microsoft Office Access (Ms Access is a database management system which is a Relational Database Management System. The database in Microsoft Access is a set of objects consisting of tables, queries, forms, reports. Archival system is basically to store useful various files for organizations with the specific rules so the files can be found quickly and easily. Therefore; Microsoft Office Access is an appropriate breakthrough to build archival application systems based on Microsoft Office Access. It is not only easy to be operated but also available a package of Microsoft Office program. One of the most important benefits of the database is to facilitate the access to the data. The ease of accessing the data is the implication of the order data since it is the prerequisite of a good database. The database of archiving system is an application or system design which allows the archives storage digitally. The objective of the e-archives application program using Microsoft Access is to facilitate the delivery of material practices of electronic filing (e-archives. The purposes of the scientific study are: (1 to determine the basic concept and scope of Electronic archives (e-archives, (2 To know how to use the media of electronic archives (E-archives aided Microsoft Office Access in the learning activities for Vocational students of Office Administration program.

INOVASI MEDIA PEMBELAJARAN KEARSIPAN ELECTRONIK ARSIP (E-ARSIP BERBASIS MICROSOFT OFFICE ACCESS

Directory of Open Access Journals (Sweden)

Ahmad Saeroji

2016-01-01

Full Text Available Microsoft Office Access (Ms Access is a database management system which is a Relational Database Management System. The database in Microsoft Access is a set of objects consisting of tables, queries, forms, reports. Archival system is basically to store useful various files for organizations with the specific rules so the files can be found quickly and easily. Therefore; Microsoft Office Access is an appropriate breakthrough to build archival application systems based on Microsoft Office Access. It is not only easy to be operated but also available a package of Microsoft Office program. One of the most important benefits of the database is to facilitate the access to the data. The ease of accessing the data is the implication of the order data since it is the prerequisite of a good database. The database of archiving system is an application or system design which allows the archives storage digitally. The objective of the e-archives application program using Microsoft Access is to facilitate the delivery of material practices of electronic filing (e-archives. The purposes of the scientific study are: (1 to determine the basic concept and scope of Electronic archives (e-archives, (2 To know how to use the media of electronic archives (E-archives aided Microsoft Office Access in the learning activities for Vocational students of Office Administration program.

Food Security and Women's Access to Natural Resources workshop; a brief report.

Science.gov (United States)

1997-01-01

This article describes the workshop on Food Security and Women's Access to Natural Resources, held in January 1997 in Mumbai, India. The workshop was organized jointly by the Tata Institute of Social Sciences and the Indian Association of Women's Studies. The aim was to examine the food security situation in Maharashtra and Gujarat states in the west, the initiative to build alternative institutions, legal changes augmenting industrialization, and how traditional rights to common property resources can be legalized and how the poor can have access to new resources. The workshop organizers were unable to obtain experts on some topics. Core discussion centered on changes in industrialization, natural resources, gender and food security; access to natural resources and poverty alleviation programs; initiatives to create food security; and laws related to access to land and water. Discussions revealed the alienation of small and marginal farmers, landless laborers, and artisans from their livelihoods and survival strategies for these disenfranchised groups. The design of drought eradication and water conservation programs did not permit women and men working at construction sites to have access to the program assets. Case studies revealed situations in which women won the right of access to community water and then negotiated for land in lease. The women used landowners to negotiate credit and access development program assets, but normal channels of the National Bank of Agricultural Research and Development could have provided these benefits. Participants discussed how governments can be held accountable and how public funds could be used to revamp poverty alleviation and asset creation programs. All agreed that macrolevel development should give priority to agricultural development and legal constraints or problems. Five follow-up activities are identified.

77 FR 66025 - Program Access Rules

Science.gov (United States)

2012-10-31

... distribution market if the prohibition were lifted.'' Accordingly, we rely on ``economic theory and predictive... incentive and the ability to harm competition and diversity in the distribution of video programming by entering into exclusive contracts. We undertake the same analysis here. Below, we consider the ``incentive...

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

Science.gov (United States)

Vollmer, R.; Palm, C.

2017-09-01

The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

Access to Higher Education in Canada: Equality of Opportunity vs. Equality of Results.

Science.gov (United States)

Anisef, Paul

1983-01-01

Discusses the issue of access to higher education in Canada and suggests that those who do not gain entry share common social and cultural properties. Recommends three strategies for enhancing accessibility: a monitoring system, compensatory education programs, and financial assistance programs. (JAC)

7 CFR 70.41 - Misrepresentation, deceptive, or fraudulent act or practice.

Science.gov (United States)

2010-01-01

... service, appeal or regrading service; (b) The making of the product accessible for sampling or grading; (c... aforesaid terms or any official stamp, symbol, label, seal, or identification in the labeling or advertising...

45 CFR 2490.149 - Program accessibility: Discrimination prohibited.

Science.gov (United States)

2010-10-01

.... 2490.149 Section 2490.149 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION § 2490.149 Program...

MLF user program

International Nuclear Information System (INIS)

Kamiyama, Takashi; Ikeda, Yujiro

2008-01-01

The user program of J-PARC/MLF is overviewed. Since MLF will be one of the major neutron facilities in the world, an international standard system for the user program is expected. It is also expected to establish a system to promote users from industries. The MLF user program is based on the IUPAP recommendation on the selection of proposals. Both open and closed accesses, biannual, regular, rapid accesses, etc. will be provided. All the features in the system are being introduced to maximize both scientific and engineering outputs from MLF. (author)

22 CFR 711.150 - Program accessibility: Existing facilities.

Science.gov (United States)

2010-04-01

... result in a fundamental alteration in the nature of a program or activity or in undue financial and....150 Section 711.150 Foreign Relations OVERSEAS PRIVATE INVESTMENT CORPORATION ADMINISTRATIVE PROVISIONS ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY...

GO RIO: Achieving Universal Access to Mass Transit

Science.gov (United States)

Martinez, Ted, Jr.; Castaneda-Calleros, Russell

2009-01-01

GO RIO is a universal access, mass-transit program that has been offered to all students who are registered full-time at Rio Hondo College. Through an agreement with five local transit agencies, full-time students can obtain a pass that provides full access seven days a week throughout the entire semester.

5 CFR 1636.150 - Program accessibility: Existing facilities.

Science.gov (United States)

2010-01-01

... fundamental alteration in the nature of a program or activity or in undue financial and administrative burdens... facilities. 1636.150 Section 1636.150 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE FEDERAL...

Data-Dictionary-Editing Program

Science.gov (United States)

Cumming, A. P.

1989-01-01

Access to data-dictionary relations and attributes made more convenient. Data Dictionary Editor (DDE) application program provides more convenient read/write access to data-dictionary table ("descriptions table") via data screen using SMARTQUERY function keys. Provides three main advantages: (1) User works with table names and field names rather than with table numbers and field numbers, (2) Provides online access to definitions of data-dictionary keys, and (3) Provides displayed summary list that shows, for each datum, which data-dictionary entries currently exist for any specific relation or attribute. Computer program developed to give developers of data bases more convenient access to the OMNIBASE VAX/IDM data-dictionary relations and attributes.

The Wired Island: The First Two Years of Public Access To Cable Television In Manhattan.

Science.gov (United States)

Othmer, David

A review is presented of the first two years of free public access programing on New York City's cable television (CATV) systems. The report provides some background information on franchising, public access to CATV in New York City, and Federal Communications Commission regulations. It also deals with the public access programing developed; it…

Harvard Law School Proxy Access Roundtable

OpenAIRE

Bebchuk, Lucian Arye; Hirst, Scott

2010-01-01

This paper contains the proceedings of the Proxy Access Roundtable that was held by the Harvard Law School Program on Corporate Governance on October 7, 2009. The Roundtable brought together prominent participants in the debate - representing a range of perspectives and experiences - for a day of discussion on the subject. The day’s first two sessions focused on the question of whether the Securities and Exchange Commission should provide an access regime, or whether it should leave the adopt...

NASA Access Mechanism - Graphical user interface information retrieval system

Science.gov (United States)

Hunter, Judy F.; Generous, Curtis; Duncan, Denise

1993-01-01

Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited by factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

NASA access mechanism: Graphical user interface information retrieval system

Science.gov (United States)

Hunter, Judy; Generous, Curtis; Duncan, Denise

1993-01-01

Access to online information sources of aerospace, scientific, and engineering data, a mission focus for NASA's Scientific and Technical Information Program, has always been limited to factors such as telecommunications, query language syntax, lack of standardization in the information, and the lack of adequate tools to assist in searching. Today, the NASA STI Program's NASA Access Mechanism (NAM) prototype offers a solution to these problems by providing the user with a set of tools that provide a graphical interface to remote, heterogeneous, and distributed information in a manner adaptable to both casual and expert users. Additionally, the NAM provides access to many Internet-based services such as Electronic Mail, the Wide Area Information Servers system, Peer Locating tools, and electronic bulletin boards.

Increasing access to emergency contraception through online prescription requests.

Science.gov (United States)

Averbach, Sarah; Wendt, Jacqueline Moro; Levine, Deborah K; Philip, Susan S; Klausner, Jeffrey D

2010-01-01

To describe a pilot program, Plan B Online Prescription Access, to provide easy access to prescriptions for emergency contraception via the Internet. We measured electronic prescriptions for Plan B (Duramed Pharmaceuticals, Cincinnati, Ohio) by month over time. Pharmacists faxed patient-generated prescriptions back to the Department of Public Health for confirmation. Despite no marketing, within the first 18 months of the program, 152 electronic prescriptions for Plan B were requested by 128 female San Francisco residents. Seventy-eight prescriptions were filled (51%) by pharmacists. If correctly marketed, online prescriptions for Plan B have the potential to be an effective means of increasing emergency contraception access in both urban and rural settings across the United States. Further user-acceptability studies are warranted.

Mexico's "Telesecundaria" Program and Equitable Access to Resources

Science.gov (United States)

Craig, Dana; Etcheverry, Jose; Ferris, Stefan

2016-01-01

This Note provides an analysis of Mexico's "Telesecundaria" program within the context of Mexico's new education reform framework offering a succinct background of the project, as well as key policy lessons that can be useful for other jurisdictions interested in the development of distance education programs. This Note uses a literature…

Accessible Earth: Enhancing diversity in the Geosciences through accessible course design

Science.gov (United States)

Bennett, R. A.; Lamb, D. A.

2017-12-01

The tradition of field-based instruction in the geoscience curriculum, which culminates in a capstone geological field camp, presents an insurmountable barrier to many disabled students who might otherwise choose to pursue geoscience careers. There is a widespread perception that success as a practicing geoscientist requires direct access to outcrops and vantage points available only to those able to traverse inaccessible terrain. Yet many modern geoscience activities are based on remotely sensed geophysical data, data analysis, and computation that take place entirely from within the laboratory. To challenge the perception of geoscience as a career option only for the non-disabled, we have created the capstone Accessible Earth Study Abroad Program, an alternative to geologic field camp for all students, with a focus on modern geophysical observation systems, computational thinking, data science, and professional development.In this presentation, we will review common pedagogical approaches in geosciences and current efforts to make the field more inclusive. We will review curricular access and inclusivity relative to a wide range of learners and provide examples of accessible course design based on our experiences in teaching a study abroad course in central Italy, and our plans for ongoing assessment, refinement, and dissemination of the effectiveness of our efforts.

Reducing the Federal Budget: Strategies and Examples, Fiscal Years 1982- 1986.

Science.gov (United States)

1981-02-01

Small issues are being used with increasing frequency to finance a wide range of facilities including manufacturing plants, fast- food franchises , and...Funding for Amtrak .......... 79 Phasing Out of Conrail Funding ........ 81 Reduction in New Subway Commitments ...... ... 83 Reduced Spending on...Grant ............... 166 Changes in Food Stamp Program . . . . . . . 168 Recoupment of Food Stamp Benefits . . . . .. 171 Change in the Low Income

28 CFR 54.415 - Access to course offerings.

Science.gov (United States)

2010-07-01

..., music, and adult education courses. (b)(1) With respect to classes and activities in physical education... SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 54.415 Access to course offerings. (a) A...

6 CFR 17.415 - Access to course offerings.

Science.gov (United States)

2010-01-01

..., home economics, music, and adult education courses. (b)(1) With respect to physical education classes... THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 17.415 Access to course...

75 FR 32341 - Import Administration IA ACCESS Pilot Program

Science.gov (United States)

2010-06-08

... submitted electronically need not also be submitted in hard copy. Persons wishing to submit written comments in hard copy should file one signed original and two copies of each set of comments to the address... . Any questions concerning file formatting, document conversion, access on the Internet, or other...

PENGUKURAN NILAI OVERALL EQUIPMENT EFFECTIVENESS SEBAGAI DASAR USAHA PERBAIKAN PROSES MANUFAKTUR PADA LINI PRODUKSI (Studi Kasus pada Stamping Production Division Sebuah Industri Otomotif

Directory of Open Access Journals (Sweden)

Robby Suhendra

2005-01-01

Full Text Available Overall Equipment Effectiveness (OEE is an effectiveness measurement method of equipment utilization in the implementation of Total Productive Maintenance (TPM. The ability of identification in details toward main problem and the cause factors that makes the improvement efforts become more focused is the reason why this method applied comprehensively by all manufacturing companies around the world. Manufacturing process at Stamping Production Division an automotive isdustry still keeps some unrevealed problems. This condition makes the achievement of OEE figure below the target that means production equipments are not utilized optimally yet. The expression of main problem and the cause factors is needed before the company starts some improvement efforts. This research is started by understanding the equipment losses that existed in company. Then, measuring the achievement of OEE figure in one period and through the pareto analysis toward the measurement's results, the main problem and the cause factors are obtained and clearly depicted in cause-and-effect diagram. Abstract in Bahasa Indonesia : Overall Equipment Effectiveness (OEE adalah metode pengukuran efektivitas penggunaan suatu peralatan. OEE dikenal sebagai salah satu aplikasi progam Total Productive Maintenance (TPM. Kemampuan mengidentifikasikan secara jelas akar permasalahan dan faktor penyebabnya sehingga membuat usaha perbaikan menjadi terfokus merupakan faktor utama metode ini diaplikasikan secara menyeluruh oleh banyak perusahaan didunia. Saat ini proses manufaktur di Stamping Production Division sebuah industri otomotif memiliki permasalahan yang belum terungkap jelas. Hal tersebut mengakibatkan penggunaan peralatan yang ada belum optimal. Pengungkapan akar masalah dan faktor penyebabnya diperlukan sebelum perusahaan melakukan usaha perbaikan. Penelitian ini dimulai dengan mengidentifikasi kerugian peralatan (Equipment Losses yang terjadi. Kemudian mengukur pencapaian nilai OEE

An Investigation of Unified Memory Access Performance in CUDA

Science.gov (United States)

Landaverde, Raphael; Zhang, Tiansheng; Coskun, Ayse K.; Herbordt, Martin

2015-01-01

Managing memory between the CPU and GPU is a major challenge in GPU computing. A programming model, Unified Memory Access (UMA), has been recently introduced by Nvidia to simplify the complexities of memory management while claiming good overall performance. In this paper, we investigate this programming model and evaluate its performance and programming model simplifications based on our experimental results. We find that beyond on-demand data transfers to the CPU, the GPU is also able to request subsets of data it requires on demand. This feature allows UMA to outperform full data transfer methods for certain parallel applications and small data sizes. We also find, however, that for the majority of applications and memory access patterns, the performance overheads associated with UMA are significant, while the simplifications to the programming model restrict flexibility for adding future optimizations. PMID:26594668

Predictive access control for distributed computation

DEFF Research Database (Denmark)

Yang, Fan; Hankin, Chris; Nielson, Flemming

2013-01-01

We show how to use aspect-oriented programming to separate security and trust issues from the logical design of mobile, distributed systems. The main challenge is how to enforce various types of security policies, in particular predictive access control policies — policies based on the future beh...... behavior of a program. A novel feature of our approach is that we can define policies concerning secondary use of data....

Accession Medical Standards Analysis and Research Activity (AMSARA), 2016 Annual Report

Science.gov (United States)

2016-11-01

NOTES The original document contains color photos. And four Supplemental Applicants and Accessions tables for: Army, Air Force, Marine, and Navy 14...accession characteristics and risk of attrition in the accessed population. T\\.VO manuscripts focus on the Assessment of Recruit Motivation and Strength...programs to improve military readiness by maximizing both the accession and retention of motivated and capable recruits. This report provides abstracts

Publish or perish, and pay--the new paradigm of open-access journals.

Science.gov (United States)

Tzarnas, Stephanie; Tzarnas, Chris D

2015-01-01

The new open-access journal business model is changing the publication landscape and residents and junior faculty should be aware of these changes. A national survey of surgery program directors and residents was performed. Open-access journals have been growing over the past decade, and many traditional printed journals are also sponsoring open-access options (the hybrid model) for accepted articles. Authors need to be aware of the new publishing paradigm and potential costs involved in publishing their work. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Creating community-based access to primary healthcare for the uninsured through strategic alliances and restructuring local health department programs.

Science.gov (United States)

Scotten, E Shirin L; Absher, Ann C

2006-01-01

In 2003, the Wilkes County Health Department joined with county healthcare providers to develop the HealthCare Connection, a coordinated and continuous system of low-cost quality care for uninsured and low-income working poor. Through this program, local providers of primary and specialty care donate specialty care or ancillary services not provided by the Health Department, which provides case management for the program. Basing their methods on business models learned through the UNC Management Academy for Public Health, planners investigated the best practices for extending healthcare coverage to the underinsured and uninsured, analyzed operational costs, discovered underutilized local resources, and built capacity within the organization. The HealthCare Connection is an example of how a rural community can join together in a common business practice to improve healthcare access for uninsured and/or low-income adults.

Structural barriers in access to medical marijuana in the USA?a systematic review protocol

OpenAIRE

Valencia, Celina I.; Asaolu, Ibitola O.; Ehiri, John E.; Rosales, Cecilia

2017-01-01

Background There are 43 state medical marijuana programs in the USA, yet limited evidence is available on the demographic characteristics of the patient population accessing these programs. Moreover, insights into the social and structural barriers that inform patients? success in accessing medical marijuana are limited. A current gap in the scientific literature exists regarding generalizable data on the social, cultural, and structural mechanisms that hinder access to medical marijuana amon...

An Analysis of Naval Officer Accession Programs

National Research Council Canada - National Science Library

Lehner, William D

2008-01-01

This thesis conducts an extensive literature review of prior studies on the three major commissioning programs for United States naval officers the United States Naval Academy, Naval Reserve Officers...

Nuclear information access system

International Nuclear Information System (INIS)

Ham, C. H.; Yang, M. H.; Yoon, S. W.

1998-01-01

The energy supply in the countries, which have abundant energy resources, may not be affected by accepting the assertion of anti-nuclear and environment groups. Anti-nuclear movements in the countries which have little energy resources may cause serious problem in securing energy supply. Especially, it is distinct in Korea because she heavily depends on nuclear energy in electricity supply(nuclear share in total electricity supply is about 40%).The cause of social trouble surrounding nuclear energy is being involved with various circumstances. However, it is very important that we are not aware of the importance of information access and prepared for such a situation from the early stage of nuclear energy's development. In those matter, this paper analyzes the contents of nuclear information access system in France and Japan which have dynamic nuclear development program and presents the direction of the nuclear access regime through comparing Korean status and referring to progresses of the regime

Community food environments and healthy food access among older adults: A review of the evidence for the Senior Farmers' Market Nutrition Program (SFMNP).

Science.gov (United States)

O'Dare Wilson, Kellie

2017-04-01

Although an array of federal, state, and local programs exist that target food insecurity and the specific nutritional needs of seniors, food insecurity among older adults in the United States remains a persistent problem, particularly in minority and rural populations. Food insecurity is highly predictive of inadequate fresh fruit and vegetable (FFV) consumption in particular. The Senior Farmers' Market Nutrition Program (SFMNP) is a community-based program to help seniors purchase FFVs at farmer's markets in their neighborhoods. The SFMNP continues to grow; however, little is known about the effectiveness of the program. The purposes of this article are to (1) highlight the importance of community and neighborhood based food insecurity programs, specifically emphasizing the importance of FFV access for seniors, (2) review the current state of the evidence on the SFMNP, and (3) provide recommendations for researchers and policy-makers wishing to continue to advance the knowledge base in neighborhood-based food security among older adults.

Migration Performance for Legacy Data Access

Directory of Open Access Journals (Sweden)

Kam Woods

2008-12-01

Full Text Available We present performance data relating to the use of migration in a system we are creating to provide web access to heterogeneous document collections in legacy formats. Our goal is to enable sustained access to collections such as these when faced with increasing obsolescence of the necessary supporting applications and operating systems. Our system allows searching and browsing of the original files within their original contexts utilizing binary images of the original media. The system uses static and dynamic file migration to enhance collection browsing, and emulation to support both the use of legacy programs to access data and long-term preservation of the migration software. While we provide an overview of the architectural issues in building such a system, the focus of this paper is an in-depth analysis of file migration using data gathered from testing our software on 1,885 CD-ROMs and DVDs. These media are among the thousands of collections of social and scientific data distributed by the United States Government Printing Office (GPO on legacy media (CD-ROM, DVD, floppy disk under the Federal Depository Library Program (FDLP over the past 20 years.

Publishing in Open Access Journals

International Development Research Centre (IDRC) Digital Library (Canada)

mbrunet

While most open access journals are peer‐reviewed and high quality, there are a number of ... Publisher has a negative reputation (e.g., documented examples in Chronicle of Higher Education, ... A key part of Canada's aid program, IDRC supports research in developing countries to promote growth and development.

Challenges in Obtaining Property Access: The FUSRAP Maywood Site Experience - 13433

International Nuclear Information System (INIS)

Kollar, William

2013-01-01

The Formerly Utilized Sites Remedial Action Program (FUSRAP) is the US government program started in 1974 to identify, investigate and clean up or control sites that became contaminated as a result of the nation's early atomic programs. Many of these sites are not owned by the federal government and therefore require owner permission to enter. The experience in pursuing such access at the FUSRAP Maywood Superfund Site (the Maywood Site or the Site) in Bergen County, New Jersey, is extensive. Since the US Army Corps of Engineers (the Corps) assumed responsibility for the Maywood Site from the US Department of Energy in 1997, at least 186 separate property access agreements (known in FUSRAP as a Real Estate Right-of- Entry or ROE) have been executed between the Corps and approximately 55 different land owners and tenant occupants at the Maywood Site (agreement renewals with the same owners over time account for the difference). Maywood's experience during the Corps' tenure, reflected here in three case studies of representative property access efforts, offers some lessons and best practices that may apply to other remedial programs. While the Site Community Relations Manager (the author of this paper) managed the property access task, multi-disciplinary support from across the project was also critical to success in this endeavor. (authors)

Excellence, Equity, and Access: Educators' Perceptions of Students in Open Access Advanced Placement Courses

Science.gov (United States)

King, Justyna Plichta

2010-01-01

This dissertation examines educators' perceptions regarding open access Advanced Placement (AP) program courses and their impact on non-traditional AP students in one suburban school district. The data were collected during the 2009-2010 school year through a 15-item Likert scale (and one open-ended item) survey which was disseminated during…

‘Postage-stamp PIV’: small velocity fields at 400 kHz for turbulence spectra measurements

Science.gov (United States)

Beresh, Steven J.; Henfling, John F.; Spillers, Russell W.; Spitzer, Seth M.

2018-03-01

Time-resolved particle image velocimetry recently has been demonstrated in high-speed flows using a pulse-burst laser at repetition rates reaching 50 kHz. Turbulent behavior can be measured at still higher frequencies if the field of view is greatly reduced and lower laser pulse energy is accepted. Current technology allows image acquisition at 400 kHz for sequences exceeding 4000 frames but for an array of only 128  ×  120 pixels, giving the moniker of ‘postage-stamp PIV’. The technique has been tested far downstream of a supersonic jet exhausting into a transonic crossflow. Two-component measurements appear valid until 120 kHz, at which point a noise floor emerges whose magnitude is dependent on the reduction of peak locking. Stereoscopic measurement offers three-component data for turbulent kinetic energy spectra, but exhibits a reduced signal bandwidth and higher noise in the out-of-plane component due to the oblique camera images. The resulting spectra reveal two regions exhibiting power-law dependence describing the turbulent decay. The frequency response of the present measurement configuration exceeds nearly all previous velocimetry measurements in high speed flow.

77 FR 47440 - Office of the Assistant Secretary for Office of Disability Employment Program Accessible...

Science.gov (United States)

2012-08-08

... employment and creating accessible human resource management systems (e.g., accessible online job application... to develop and operate the Accessible Technology Action Center (ATAC), a new national resource to..., coordinate and publicize resources on accessible technology in the workplace; (2) promote effective employer...

75 FR 2583 - Over-the-Road Bus Accessibility Program Grants

Science.gov (United States)

2010-01-15

... complying with DOT's over- the-road bus accessibility regulation. The authorizing legislation calls for..., 915 Chicago, IL 60606, Tel. 312-353- Second Avenue, Suite 3142, 2789. Seattle, WA 98174-1002, Tel. 206...

Small scale farmers’ access to and participation in markets : The case of the P4P program in western Kenya

OpenAIRE

Skjöldevald, Maja

2012-01-01

The purpose of this thesis is to understand how small scale farmers navigate the market to access and participate in the formal maize market to improve their revenue, utilising the case of the P4P program inKenya. The empirical material was collected during fieldwork in Kenya. Qualitative methods were found to be the most suitable for this thesis. The methods that was utilised were a case study strategy, semi structured interviews, focus groups, observations and analysis of secondary sources....

[Access to medicines prescribed for acute health conditions in adults in South and Northeast Brazil].

Science.gov (United States)

Paniz, Vera Maria Vieira; Cechin, Isabel Carolina Coelho Flores; Fassa, Anaclaudia Gastal; Piccini, Roberto Xavier; Tomasi, Elaine; Thumé, Elaine; Silveira, Denise Silva da; Facchini, Luiz Augusto

2016-01-01

This was a cross-sectional study within Brazil's Project for the Expansion and Consolidation of Family Health, 2005, with the objective of universal and free access to the medication prescribed in the last medical appointment for acute health problems and to estimate the degree to which access may have improved with inclusion of the medicines in prevailing policies and programs. The sample included 4,060 adults living in the area of primary health care units in 41 municipalities in South and Northeast Brazil. Access was greater in the South (83.2%) than in the Northeast (71%), and free access was similar (37%), with a greater share by the Family Health Program (FHP) when compared to the traditional model, especially in the Northeast. Some 60% of prescribed medicines and 50% of those on the National List of Essential Medicines (RENAME) were paid for. No variation was observed in the proportion of medicines present on the prevailing RENAME list and access. However, 40% of the medicines that were paid for can currently be obtained through the Popular Pharmacy Program. The latter program appears to emerge as a new way to guarantee access to medicines prescribed in the health system.

High Optical Access Trap 2.0.

Energy Technology Data Exchange (ETDEWEB)

Maunz, Peter Lukas Wilhelm [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-01-26

The High Optical Access (HOA) trap was designed in collaboration with the Modular Universal Scalable Ion-trap Quantum Computer (MUSIQC) team, funded along with Sandia National Laboratories through IARPA's Multi Qubit Coherent Operations (MQCO) program. The design of version 1 of the HOA trap was completed in September 2012 and initial devices were completed and packaged in February 2013. The second version of the High Optical Access Trap (HOA-2) was completed in September 2014 and is available at IARPA's disposal.

Decoupled Access-Execute on ARM big.LITTLE

OpenAIRE

Weber, Anton

2016-01-01

Decoupled Access-Execute (DAE) presents a novel approach to improve power efficiency with a combination of compile-time transformations and Dynamic Voltage Frequency Scaling (DVFS). DAE splits regions of the program into two distinct phases: a memory-bound access phase and a compute-bound execute phase. DVFS is used to run the phases at different frequencies, thus conserving energy while caching data from main memory and performing computations at maximum performance. This project analyses th...

Women: Putting Our Stamp on America

National Research Council Canada - National Science Library

1999-01-01

.... SCOPE The Topical Research Intern Program provides the opportunity for servicemembers and DOD civilian employees to work on diversity/equal opportunity projects while on a 30-day tour of duty at the Institute...

EntrezAJAX: direct web browser access to the Entrez Programming Utilities

Directory of Open Access Journals (Sweden)

Pallen Mark J

2010-06-01

Full Text Available Abstract Web applications for biology and medicine often need to integrate data from Entrez services provided by the National Center for Biotechnology Information. However, direct access to Entrez from a web browser is not possible due to 'same-origin' security restrictions. The use of "Asynchronous JavaScript and XML" (AJAX to create rich, interactive web applications is now commonplace. The ability to access Entrez via AJAX would be advantageous in the creation of integrated biomedical web resources. We describe EntrezAJAX, which provides access to Entrez eUtils and is able to circumvent same-origin browser restrictions. EntrezAJAX is easily implemented by JavaScript developers and provides identical functionality as Entrez eUtils as well as enhanced functionality to ease development. We provide easy-to-understand developer examples written in JavaScript to illustrate potential uses of this service. For the purposes of speed, reliability and scalability, EntrezAJAX has been deployed on Google App Engine, a freely available cloud service. The EntrezAJAX webpage is located at http://entrezajax.appspot.com/

The educational impact of the Specialty Care Access Network-Extension of Community Healthcare Outcomes program.

Science.gov (United States)

Salgia, Reena J; Mullan, Patricia B; McCurdy, Heather; Sales, Anne; Moseley, Richard H; Su, Grace L

2014-11-01

With the aging hepatitis C cohort and increasing prevalence of fatty liver disease, the burden on primary care providers (PCPs) to care for patients with liver disease is growing. In response, the Veterans Administration implemented initiatives for primary care-specialty referral to increase PCP competency in complex disease management. The Specialty Care Access Network-Extension of Community Healthcare Outcomes (SCAN-ECHO) program initiative was designed to transfer subspecialty knowledge to PCPs through case-based distance learning combined with real-time consultation. There is limited information regarding the initiative's ability to engage PCPs to learn and influence their practice. We surveyed PCPs to determine the factors that led to their participation in this program and the educational impact of participation. Of 51 potential participants, 24 responded to an anonymous survey. More than 75% of respondents participated more than one time in a SCAN-ECHO clinic. Providers were motivated to participate by a desire to learn more about liver disease, to apply the knowledge gained to future patients, and to save their patients time traveling to another center for specialty consultation. Seventy-one percent responded that the didactic component and case-based discussion were equally important. It is important that participation changed clinical practice: 75% of providers indicated they had personally discussed the information they learned from the case presentations with their colleague(s), and 42% indicated they helped a colleague care for their patient with the knowledge learned during discussions of other participants' cases. This study shows that the SCAN-ECHO videoconferencing program between PCPs and specialists can educate providers in the delivery of specialty care from a distance and potentially improve healthcare delivery.

7 CFR 37.9 - Access to establishments or records; record retention.

Science.gov (United States)

2010-01-01

... STANDARD CONTAINER REGULATIONS PROGRAM TO ASSESS ORGANIC CERTIFYING AGENCIES § 37.9 Access to... processes associated with an approved certification program. Records and documents shall be retained for at...

Improving awareness, accountability, and access through health coaching

Science.gov (United States)

Liddy, Clare; Johnston, Sharon; Irving, Hannah; Nash, Kate; Ward, Natalie

2015-01-01

Abstract Objective To assess patients’ experiences with and perceptions of health coaching as part of their ongoing care. Design A qualitative research design using semistructured interviews that were recorded and transcribed verbatim. Setting Ottawa, Ont. Participants Eleven patients (> 18 years of age) enrolled in a health coaching pilot program who were at risk of or diagnosed with type 2 diabetes. Methods Patients’ perspectives were assessed with semistructured interviews. Interviews were conducted with 11 patients at the end of the pilot program, using a stratified sampling approach to ensure maximum variation. Main findings All patients found the overall experience with the health coaching program to be positive. Patients believed the health coaching program was effective in increasing awareness of how diabetes affected their bodies and health, in building accountability for their health-related actions, and in improving access to care and other health resources. Conclusion Patients perceive one-on-one health coaching as an acceptable intervention in their ongoing care. Patients enrolled in the health coaching pilot program believed that there was an improvement in access to care, health literacy, and accountability, all factors considered to be precursors to behavioural change. PMID:25932483

Channel Access Algorithm Design for Automatic Identification System

Institute of Scientific and Technical Information of China (English)

Oh Sang-heon; Kim Seung-pum; Hwang Dong-hwan; Park Chan-sik; Lee Sang-jeong

2003-01-01

The Automatic Identification System (AIS) is a maritime equipment to allow an efficient exchange of the navigational data between ships and between ships and shore stations. It utilizes a channel access algorithm which can quickly resolve conflicts without any intervention from control stations. In this paper, a design of channel access algorithm for the AIS is presented. The input/output relationship of each access algorithm module is defined by drawing the state transition diagram, dataflow diagram and flowchart based on the technical standard, ITU-R M.1371. In order to verify the designed channel access algorithm, the simulator was developed using the C/C++ programming language. The results show that the proposed channel access algorithm can properly allocate transmission slots and meet the operational performance requirements specified by the technical standard.

PathwayAccess: CellDesigner plugins for pathway databases.

Science.gov (United States)

Van Hemert, John L; Dickerson, Julie A

2010-09-15

CellDesigner provides a user-friendly interface for graphical biochemical pathway description. Many pathway databases are not directly exportable to CellDesigner models. PathwayAccess is an extensible suite of CellDesigner plugins, which connect CellDesigner directly to pathway databases using respective Java application programming interfaces. The process is streamlined for creating new PathwayAccess plugins for specific pathway databases. Three PathwayAccess plugins, MetNetAccess, BioCycAccess and ReactomeAccess, directly connect CellDesigner to the pathway databases MetNetDB, BioCyc and Reactome. PathwayAccess plugins enable CellDesigner users to expose pathway data to analytical CellDesigner functions, curate their pathway databases and visually integrate pathway data from different databases using standard Systems Biology Markup Language and Systems Biology Graphical Notation. Implemented in Java, PathwayAccess plugins run with CellDesigner version 4.0.1 and were tested on Ubuntu Linux, Windows XP and 7, and MacOSX. Source code, binaries, documentation and video walkthroughs are freely available at http://vrac.iastate.edu/~jlv.

41 CFR 101-4.415 - Access to course offerings.

Science.gov (United States)

2010-07-01

..., music, and adult education courses. (b)(1) With respect to classes and activities in physical education... EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 101-4.415 Access to course offerings. (a) A...

42 CFR 51.42 - Access to facilities and residents.

Science.gov (United States)

2010-10-01

... REQUIREMENTS APPLICABLE TO THE PROTECTION AND ADVOCACY FOR INDIVIDUALS WITH MENTAL ILLNESS PROGRAM Access to... such monitoring have access to the minor or adult with a legal guardian. The system shall take no... request, by the P&A system when: (1) An incident is reported or a complaint is made to the P&A system; (2...

Accessible Earth: An accessible study abroad capstone for the geoscience curriculum

Science.gov (United States)

Bennett, R. A.; Lamb, D. A.

2017-12-01

International capstone field courses offer geoscience-students opportunities to reflect upon their knowledge, develop intercultural competence, appreciate diversity, and recognize themselves as geoscientists on a global scale. Such experiences are often described as pivotal to a geoscientist's education, a right of passage. However, field-based experiences present insurmountable barriers to many students, undermining the goal of inclusive excellence. Nevertheless, there remains a widespread belief that successful geoscientists are those able to traverse inaccessible terrain. One path forward from this apparent dilemma is emerging as we take steps to address a parallel challenge: as we move into the 21st century the geoscience workforce will require an ever increasing range of skills, including analysis, modeling, communication, and computational proficiency. Computer programing, laboratory experimentation, numerical simulation, etc, are inherently more accessible than fieldwork, yet equally valuable. Students interested in pursuing such avenues may be better served by capstone experiences that align more closely with their career goals. Moreover, many of the desirable learning outcomes attributed to field-based education are not unique to immersion in remote inaccessible locations. Affective and cognitive gains may also result from social bonding through extended time with peers and mentors, creative synthesis of knowledge, project-based learning, and intercultural experience. Developing an inclusive course for the geoscience curriculum requires considering all learners, including different genders, ages, physical abilities, familial dynamics, and a multitude of other attributes. The Accessible Earth Study Abroad Program endeavors to provide geoscience students an inclusive capstone experience focusing on modern geophysical observation systems (satellite based observations and permanent networks of ground-based instruments), computational thinking and methods of

Challenges in Obtaining Property Access: The FUSRAP Maywood Site Experience - 13433

Energy Technology Data Exchange (ETDEWEB)

Kollar, William [Shaw Environmental, Inc., 100 West Hunter Avenue, Maywood, NJ 07607 (United States)

2013-07-01

The Formerly Utilized Sites Remedial Action Program (FUSRAP) is the US government program started in 1974 to identify, investigate and clean up or control sites that became contaminated as a result of the nation's early atomic programs. Many of these sites are not owned by the federal government and therefore require owner permission to enter. The experience in pursuing such access at the FUSRAP Maywood Superfund Site (the Maywood Site or the Site) in Bergen County, New Jersey, is extensive. Since the US Army Corps of Engineers (the Corps) assumed responsibility for the Maywood Site from the US Department of Energy in 1997, at least 186 separate property access agreements (known in FUSRAP as a Real Estate Right-of- Entry or ROE) have been executed between the Corps and approximately 55 different land owners and tenant occupants at the Maywood Site (agreement renewals with the same owners over time account for the difference). Maywood's experience during the Corps' tenure, reflected here in three case studies of representative property access efforts, offers some lessons and best practices that may apply to other remedial programs. While the Site Community Relations Manager (the author of this paper) managed the property access task, multi-disciplinary support from across the project was also critical to success in this endeavor. (authors)

Theoretical and experimental study of the rule for heat transfer coefficient in hot stamping of high strength steels

International Nuclear Information System (INIS)

Han, Xianhong; Hao, Xin; Yang, Kun; Zhong, Yaoyao

2013-01-01

Heat transfer is a crucial aspect for hot stamping process, the fully austenitized boron steel blank with temperature about 900°C is transferred to the tool, then formed rapidly and quenched in the cooled tool. The desired fully martensitic transformation will happen only if the cooling rate exceeds a critical value approximately 27 K/s. During such process, the heat transfer coefficient (abbreviated as HTC) between the tool and blank plays a decisive role for the variation of the blank temperature. In this work, a theoretical formula based on the joint-roughness model is presented to describe the law of HTC, which relies on the roughness, hardness, and other material parameters of the tool and blank. Moreover, a non-contact temperature measuring system based on the infrared thermal camera is built to catch the temperature change course, and then the HTC value is derived through the inverse analysis. Based on the theoretical and experimental results, the change rule of HTC especially its dependence on the process pressure will be discussed in detail

Vertically integrated deep N-well CMOS MAPS with sparsification and time stamping capabilities for thin charged particle trackers

International Nuclear Information System (INIS)

Ratti, L.; Gaioni, L.; Manghisoni, M.; Re, V.; Traversi, G.

2010-01-01

A fine pitch, deep N-well CMOS monolithic active pixel sensor (DNW CMOS MAPS) with sparsified readout architecture and time stamping capabilities has been designed in a vertical integration (3D) technology. In this process, two 130 nm CMOS wafers are face-to-face bonded by means of thermo-compression techniques ensuring both the mechanical stability of the structure and the electrical interconnection between circuits belonging to different layers. This 3D design represents the evolution of a DNW monolithic sensor already fabricated in a planar 130 nm CMOS technology in view of applications to the vertex detector of the International Linear Collider (ILC). The paper is devoted to discussing the main design features and expected performance of the 3D DNW MAPS. Besides describing the front-end circuits and the general architecture of the detector, the work also provides some results from calculations and Monte Carlo device simulations comparing the old 2D solution with the new 3D one and illustrating the attainable detection efficiency improvements.

Vertically integrated deep N-well CMOS MAPS with sparsification and time stamping capabilities for thin charged particle trackers

Energy Technology Data Exchange (ETDEWEB)

Ratti, L., E-mail: lodovico.ratti@unipv.i [Universita di Pavia, Dipartimento di Elettronica, Via Ferrata 1, I-27100 Pavia (Italy); INFN, Sezione di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Gaioni, L. [Universita di Pavia, Dipartimento di Elettronica, Via Ferrata 1, I-27100 Pavia (Italy); INFN, Sezione di Pavia, Via Bassi 6, I-27100 Pavia (Italy); Manghisoni, M.; Re, V.; Traversi, G. [Universita di Bergamo, Dipartimento di Ingegneria Industriale, Via Marconi 5, I-24044 Dalmine (Bulgaria) (Italy); INFN, Sezione di Pavia, Via Bassi 6, I-27100 Pavia (Italy)

2010-12-11

A fine pitch, deep N-well CMOS monolithic active pixel sensor (DNW CMOS MAPS) with sparsified readout architecture and time stamping capabilities has been designed in a vertical integration (3D) technology. In this process, two 130 nm CMOS wafers are face-to-face bonded by means of thermo-compression techniques ensuring both the mechanical stability of the structure and the electrical interconnection between circuits belonging to different layers. This 3D design represents the evolution of a DNW monolithic sensor already fabricated in a planar 130 nm CMOS technology in view of applications to the vertex detector of the International Linear Collider (ILC). The paper is devoted to discussing the main design features and expected performance of the 3D DNW MAPS. Besides describing the front-end circuits and the general architecture of the detector, the work also provides some results from calculations and Monte Carlo device simulations comparing the old 2D solution with the new 3D one and illustrating the attainable detection efficiency improvements.

Chromosome numbers and meiotic behavior of some Paspalum accessions

Directory of Open Access Journals (Sweden)

Eleniza de Victor Adamowski

2005-12-01

Full Text Available Chromosome number and meiotic behavior were evaluated in 36 Brazilian accessions of the grass Paspalum (which had never previously been analyzed to determinate which accessions might be useful in interspecific hybridizations. The analysis showed that one accession of Paspalum coryphaeum was diploid (2n = 2x = 20 and one accession of Paspalum conspersum hexaploid (2n = 6x = 60, the remaining 34 accessions being tetraploid (2n = 4x = 40. The pairing configuration was typical for the ploidy level i.e. in the diploid, chromosomes paired as 10 bivalents, in tetraploids as bi-, tri- and quadrivalents, and in hexaploid as 30 bivalents. A low frequency of meiotic abnormalities (less than 10% was observed in the diploid, hexaploid and some tetraploid accessions, although the majority of tetraploid accessions showed a high frequency of meiotic irregularities. The use of accessions with a low frequency of meiotic abnormalities in breeding programs is discussed.

BIODIVERSITY OF NATIONAL SQUASH CULTIVAR ACCESSIONS

Directory of Open Access Journals (Sweden)

A. F. Bukharov

2017-01-01

Full Text Available The squash is one of  the most  ancient plants, bearing numerous qualities. The squash gave high yield and is unpretentious plant, the fruit of which is long-stored and can be used as boiled, stewed, baked, fried product, and be added to bread, mush and pudding, and be prepared as puree, jam, candied fruit and other meals. Owing to useful characteristics the squash is a valuable source or raw  material for  food  canning  industry,  for  health-care and functional foodstuff production. Its best cultivar accessions contain to 30% of dry matter, to 12% of sugars  and  to  36%  of  carotene.  The  species  of  squash includes 4 subspecies and 20 varieties. One accession that came from Spain in 1937 served as an initial breeding accession for many other table cultivars for long time. For 80 years of national breeding program the many cultivars for  table  use have been released. There are the classic cultivars, such as ‘Mramornaya’, ‘Stolovaya Zimnaya’,  Gribovskaya Zimnaya’,  ‘Donskaya  Sladkaya’, ‘Michurinskaya’ that are selected or developed from first Spanish accession. This richness and originality of cultivar squash accessions should be carefully preserved. There are the new generation cultivars, such as ‘Kroshka’, ‘Malishka’,    ‘Rossiyanka’,    ‘Konfetka’,    ‘Moskvichka’, ‘Vnuchka’ and many others, which are short-tendrils and suitable for  modern  mechanized cultivation  technology. Moreover the development of new cultivars, bearing resistance to biotic and abiotic stress is the main goal of nearest breeding program.

Accessing Safe Deliveries in Tanzania (IMCHA) | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Few healthcare workers are trained to offer emergency obstetrical care, so timely ... With better access to skilled care and emergency services, the project aims to ... training program as it relates to health service delivery and health outcomes.

Open Access in Higher Education–Strategies for Engaging Diverse Student Cohorts

Directory of Open Access Journals (Sweden)

Luisa Signor

2014-07-01

Full Text Available With growth in online education, students gain tertiary qualifications through a mode more suited to their demographics such as work and life balance, learning styles and geographical accessibility. Inevitably this has led to a growth in diversity within student cohorts.The case study described in this paper illustrates strategies based on informed learning design for educating diverse student cohorts in an online program offered by Swinburne University of Technology. The case, an open-access, undergraduate information systems program, attracts mature age students studying while balancing employment and family commitments. The program’s open-access facet is the ‘no entry requirements’ such as prerequisite studies. Hence, many students enter the program via non-traditional pathways bringing significant differences in experience and consequent skill bases. The program’s innovative pedagogy encourages students to engage via active learning with tailored assessments, interactive communication via discussion boards and facilitated real-time sessions and formative feedback which include audio components.

OpenCourseWare, Global Access and the Right to Education: Real access or marketing ploy?

Directory of Open Access Journals (Sweden)

Henk Huijser

2008-02-01

Full Text Available This paper explores the potential opportunities that OpenCourseWare (OCW offers in providing wider access to tertiary education, based on the ideal of ‘the right to education’. It first discusses the wider implications of OCW, and its underlying philosophy, before using a case study of a tertiary preparation program (TPP at the University of Southern Queensland (USQ to draw out the issues involved in offering a program that is created in a particular national and social context on a global scale. This paper draws specific attention to the digital divide, its effects in national and global contexts, and the particular obstacles this presents with regards to OCW. This paper argues that OCW provides many opportunities, both in terms of access to education and in terms of student recruitment and marketing for universities. To take full advantage of those opportunities, however, requires a concerted effort on the part of tertiary education institutions, and it requires a vision that is fundamentally informed by, and committed to, the principle of ‘the right to education’.

Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation

Directory of Open Access Journals (Sweden)

Chuan Wang

2013-01-01

Full Text Available In order to improve the efficiency of stainless steel stamping multistage pump, quadratic regression orthogonal test, hydraulic design, and computational fluid dynamics (CFD are used to analyze the effect of pump geometric parameters. Sixteen impellers are designed based on the quadratic regression orthogonal test, which have three factors including impeller outlet slope, impeller blade outlet stagger angle, and impeller blade outlet width. Through quadratic regression equation, the function relationship between efficiency values and three factors is established. The optimal combination of geometric parameters is found through the analysis of the regression equation. To further study the influence of blade thickness on the performance of multistage pump, numerical simulations of multistage pump with different blade thicknesses are carried out. The influence law of blade thickness on pump performance is built from the external characteristics and internal flow field. In conclusion, with the increase of blade thickness, the best efficiency point of the pump shifts to the small flow rate direction, and the vortex regions inside the pump at rated flow gradually increase, which is the main reason that pump efficiency decreases along with the increase of the blade thickness at rated flow.

Probing Protein Multidimensional Conformational Fluctuations by Single-Molecule Multiparameter Photon Stamping Spectroscopy

Science.gov (United States)

2015-01-01

Conformational motions of proteins are highly dynamic and intrinsically complex. To capture the temporal and spatial complexity of conformational motions and further to understand their roles in protein functions, an attempt is made to probe multidimensional conformational dynamics of proteins besides the typical one-dimensional FRET coordinate or the projected conformational motions on the one-dimensional FRET coordinate. T4 lysozyme hinge-bending motions between two domains along α-helix have been probed by single-molecule FRET. Nevertheless, the domain motions of T4 lysozyme are rather complex involving multiple coupled nuclear coordinates and most likely contain motions besides hinge-bending. It is highly likely that the multiple dimensional protein conformational motions beyond the typical enzymatic hinged-bending motions have profound impact on overall enzymatic functions. In this report, we have developed a single-molecule multiparameter photon stamping spectroscopy integrating fluorescence anisotropy, FRET, and fluorescence lifetime. This spectroscopic approach enables simultaneous observations of both FRET-related site-to-site conformational dynamics and molecular rotational (or orientational) motions of individual Cy3-Cy5 labeled T4 lysozyme molecules. We have further observed wide-distributed rotational flexibility along orientation coordinates by recording fluorescence anisotropy and simultaneously identified multiple intermediate conformational states along FRET coordinate by monitoring time-dependent donor lifetime, presenting a whole picture of multidimensional conformational dynamics in the process of T4 lysozyme open-close hinge-bending enzymatic turnover motions under enzymatic reaction conditions. By analyzing the autocorrelation functions of both lifetime and anisotropy trajectories, we have also observed the dynamic and static inhomogeneity of T4 lysozyme multidimensional conformational fluctuation dynamics, providing a fundamental

AVLIS industrial access program

International Nuclear Information System (INIS)

1984-01-01

This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the project in a competitive procurement situation. As a result, costs and procurement risks are both reduced because the products provided come from within the AVLIS suppliers' experience base. At the same time, suppliers can benefit by the potential to participate in AVLIS technology spin-off markets. 35 figures

AVLIS industrial access program

Energy Technology Data Exchange (ETDEWEB)