WorldWideScience

Sample records for stamp participation electronic

  1. ANALYSIS OF FOOD STAMP PROGRAM PARTICIPATION AND FOOD EXPENDITURES

    OpenAIRE

    Smallwood, David M.; Blaylock, James R.

    1985-01-01

    A two equation model is developed to examine jointly the determinants of household food stamp program participation and program effects on food expenditures. The model is unique in that it postulates that the participation decision is based on a cost-benefit ratio, selected socioeconomic characteristics, and the potential for increasing both food and nonfood expenditures. Data from the 1977-78 USDA Nationwide Food Consumption Survey Supplemental Low Income Sample is used to estimate the model...

  2. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2012-12-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity.Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes.The object of paper is .-signature and time stamping application in the theoretical and practical way.The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  3. Impact of Electronic Signatures and Time Stamping for the Protection of Electronic Agreements

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-02-01

    Full Text Available The article e495 valuates the impact of e-signatures and time stamping on electronic contracts and electronic documents for performing e-business opportunities and goals, and analyses e-signature application for business cases. Various electronic services, virtual shopping, electronic cash transactions are becoming increasingly popular as they allow users to quickly perform different actions, operations and functions. It is important not only for convenience, but also to ensure consumer data security and reliability. Security reasons are not enough for security transmitted data, since this method does not allow clarification of information about sender identity. Use of electronic signatures, electronic identities, checgs and ensures a very high level of data security in interchange data processes. E-signature allows e-business companies to transfer the company’s operation business processes and their application to the organization and management in the electronic environment, also automate internal and external compans processes, includinggon-going business processes. The object of paper is .-signature and time stamping application in the theoretical and practical way. The goal of this paper while evaluating and estimating the .-signature and time stamping application, i’s regulation and legal implementation worldwidesand in Lithuania—is to provideluseful recommendations for more efficient impact developing -commerce and -business in situations when -signature and time stamping is used for ensuring electronic contracs security.

  4. Developing roll-to-roll manufacturing system for flexible and stretchable electronics by direct stamping of silver nano-ink

    OpenAIRE

    Kim, Jiseok

    2014-01-01

    Direct stamping of silver nanoparticle based ink has been developed for cost-effective and process-effective manufacturing of flexible or stretchable electronic devices. Facile removal of residual layer from deposited silver nanoparticles (AgNPs) layer results in high fidelity of final silver electrode without further post-processes. Scanning electron microscopy (SEM) images and energy dispersive x-ray spectroscopic analysis have revealed residue-free transfer of microscale inter-digitated ca...

  5. Fabrication of Nanoimprint stamps for photonic crystals

    International Nuclear Information System (INIS)

    Kouba, J; Kubenz, M; Mai, A; Ropers, G; Eberhardt, W; Loechel, B

    2006-01-01

    We report on fabrication of nanoimprint stamps for fabrication of two dimensional photonic crystals in visible range of spectra. Nanoimprint stamps made of silicon and/or nickel were successfully fabricated using electron beam lithography and advanced dry etching techniques. The quality of the stamps was evaluated using scanning electron microscopy. The fabricated stamps were also evaluated by imprinting them into suitable polymer materials

  6. Public Participation Guide: Electronic Democracy

    Science.gov (United States)

    Electronic democracy describes a wide range of interactive tools that embrace existing and emergent media sources as a forum for allowing members of the public to express opinions and seek to influence decision-making.

  7. Web sites survey for electronic public participation

    International Nuclear Information System (INIS)

    Park, Moon Su; Lee, Young Wook; Kang, Chang Sun

    2004-01-01

    Public acceptance has been a key factor in nuclear industry as well as other fields. There are many ways to get public acceptance. Public participation in making a policy must be a good tool for this purpose. Moreover, the participation by means of internet may be an excellent way to increase voluntary participation. In this paper, the level of electronic public participation is defined and how easy and deep for lay public to participate electronically is assessed for some organization's web sites

  8. A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

    CERN Document Server

    Doroud, K

    2017-01-01

    Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

  9. A new approach for improved time and position measurements for TOF-PET: Time-stamping of the photo-electrons using analogue SiPMs

    Energy Technology Data Exchange (ETDEWEB)

    Doroud, K., E-mail: Katayoun.Doroud@cern.ch [CERN Geneva (Switzerland); Williams, M.C.S. [CERN Geneva (Switzerland); INFN, Bologna (Italy)

    2017-03-21

    Measurement of the Time-of-Flight (TOF) of the 511 keV gammas brings an important reduction of statistical noise in the PET image, with higher precision time measurements producing clearer images. The common method of coupling a photodetector to scintillating crystals is to have two matching matrices, with a one-to-one coupling between the crystal and the photodetector. We propose a new geometry based on analogue strip SiPMs reading out a scintillator cut into slabs. This technique allows the time stamping of individual photo-electrons and extracts the best time resolution using a specific algorithm. Here we present the results from the first ‘slab module’ test.

  10. Stamping through astronomy

    CERN Document Server

    Dicati, Renato

    2013-01-01

    Stamps and other postal documents are an attractive vehicle for presenting astronomy and its development. Written with expertise and great enthusiasm, this unique book offers a historical and philatelic survey of astronomy and some related topics on space exploration. It contains more than 1300 color reproductions of stamps relating to the history of astronomy, ranging from the earliest observations of the sky to modern research conducted with satellites and space probes. Featured are the astronomers and astrophysicists who contributed to this marvelous story – not only Ptolemy, Copernicus, Kepler, Newton, Herschel, and Einstein but also hundreds of other minor protagonists who played an important role in the development of this, the most ancient yet the most modern of all the sciences. The book also examines in depth the diverse areas which have contributed to the history of astronomy, including the instrumentation, the theories, and the observations. Many stamps illustrate the beauty and the mystery of ce...

  11. Rapid thermal processing by stamping

    Science.gov (United States)

    Stradins, Pauls; Wang, Qi

    2013-03-05

    A rapid thermal processing device and methods are provided for thermal processing of samples such as semiconductor wafers. The device has components including a stamp (35) having a stamping surface and a heater or cooler (40) to bring it to a selected processing temperature, a sample holder (20) for holding a sample (10) in position for intimate contact with the stamping surface; and positioning components (25) for moving the stamping surface and the stamp (35) in and away from intimate, substantially non-pressured contact. Methods for using and making such devices are also provided. These devices and methods allow inexpensive, efficient, easily controllable thermal processing.

  12. Facile stamp patterning method for superhydrophilic/superhydrophobic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lyu, Sungnam, E-mail: blueden@postech.ac.kr; Hwang, Woonbong, E-mail: whwang@postech.ac.kr [Department of Mechanical Engineering, POSTECH, Pohang 680-749 (Korea, Republic of)

    2015-11-16

    Patterning techniques are essential to many research fields such as chemistry, biology, medicine, and micro-electromechanical systems. In this letter, we report a simple, fast, and low-cost superhydrophobic patterning method using a superhydrophilic template. The technique is based on the contact stamping of the surface during hydrophobic dip coating. Surface characteristics were measured using scanning electron microscopy and energy-dispersive X-ray spectroscopic analysis. The results showed that the hydrophilic template, which was contacted with the stamp, was not affected by the hydrophobic solution. The resolution study was conducted using a stripe shaped stamp. The patterned line was linearly proportional to the width of the stamp line with a constant narrowing effect. A surface with regions of four different types of wetting was fabricated to demonstrate the patterning performance.

  13. Flexible Stamp for Nanoimprint Lithography

    DEFF Research Database (Denmark)

    Nielsen, Theodor; Pedersen, Rasmus H.; Hansen, Ole

    2005-01-01

    by membranes. The bending stiffness difference between the imprint areas and the membranes ensures that the deformation of the stamp during the imprint process mainly takes place in the membranes, leaving the imprint structures unaffected. By this design the strong demand to the parallelism between stamp...... and substrate in the imprint situation is decoupled from the pressing tool and the wafer quality. The stamp consist of 1562 imprint areas (1 mm × 1 mm) containing the patterns to be replicated. The imprinted patterns are characterized with respect to the imprint depth and the polymer residual layer thickness...

  14. Implementation of time stamping service

    OpenAIRE

    Tomažin , Vito

    2015-01-01

    This thesis deals with different ways of how to safely time-stamp digital content. The need for time-stamping arises when we would like to create evidence that certain content existed (or that a certain person was present somewhere) in a precisely specified period of time, so that later we can refer to this evidence. Creating temporal order in the digital world can prove to be difficult, since no data, including time, is recorded permanently. The system clock, which measures time with the ...

  15. Food Stamps and Food Insecurity: What Can Be Learned in the Presence of Nonclassical Measurement Error?

    Science.gov (United States)

    Gundersen, Craig; Kreider, Brent

    2008-01-01

    Policymakers have been puzzled to observe that food stamp households appear more likely to be food insecure than observationally similar eligible nonparticipating households. We reexamine this issue allowing for nonclassical reporting errors in food stamp participation and food insecurity. Extending the literature on partially identified…

  16. Time series analysis of tool wear in sheet metal stamping using acoustic emission

    Science.gov (United States)

    Vignesh Shanbhag, V.; Pereira, P. Michael; Rolfe, F. Bernard; Arunachalam, N.

    2017-09-01

    Galling is an adhesive wear mode that often affects the lifespan of stamping tools. Since stamping tools represent significant economic cost, even a slight improvement in maintenance cost is of high importance for the stamping industry. In other manufacturing industries, online tool condition monitoring has been used to prevent tool wear-related failure. However, monitoring the acoustic emission signal from a stamping process is a non-trivial task since the acoustic emission signal is non-stationary and non-transient. There have been numerous studies examining acoustic emissions in sheet metal stamping. However, very few have focused in detail on how the signals change as wear on the tool surface progresses prior to failure. In this study, time domain analysis was applied to the acoustic emission signals to extract features related to tool wear. To understand the wear progression, accelerated stamping tests were performed using a semi-industrial stamping setup which can perform clamping, piercing, stamping in a single cycle. The time domain features related to stamping were computed for the acoustic emissions signal of each part. The sidewalls of the stamped parts were scanned using an optical profilometer to obtain profiles of the worn part, and they were qualitatively correlated to that of the acoustic emissions signal. Based on the wear behaviour, the wear data can be divided into three stages: - In the first stage, no wear is observed, in the second stage, adhesive wear is likely to occur, and in the third stage severe abrasive plus adhesive wear is likely to occur. Scanning electron microscopy showed the formation of lumps on the stamping tool, which represents galling behavior. Correlation between the time domain features of the acoustic emissions signal and the wear progression identified in this study lays the basis for tool diagnostics in stamping industry.

  17. Food Stamps. Learning Packet No. 2.

    Science.gov (United States)

    American Bar Association, Washington, DC. Clearinghouse for Offender Literacy Programs.

    This package of instructional materials is designed to aid adults in prison to perform the functional skill of applying for food stamps. The materials consist of instructions for teachers, a sample application for food stamps, a student's work sheet and answer sheet, vocabulary flash cards, and resource materials on food stamps. (MKM)

  18. 7 CFR 916.115 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 916.115 Section 916.115 Agriculture... and Regulations § 916.115 Lot stamping. Except when loaded directly into railway cars, exempted under... Inspection Service lot stamp number, assigned by such Service, showing that such fruit has been USDA...

  19. 7 CFR 917.150 - Lot stamping.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Lot stamping. 917.150 Section 917.150 Agriculture... CALIFORNIA Rules and Regulations Regulation of Daily Shipments § 917.150 Lot stamping. Except when loaded..., prior to shipment, with a Federal-State Inspection Service lot stamp number, assigned by such Service...

  20. Stamp Verification for Automated Document Authentication

    DEFF Research Database (Denmark)

    Micenková, Barbora; van Beusekom, Joost; Shafait, Faisal

    Stamps, along with signatures, can be considered as the most widely used extrinsic security feature in paper documents. In contrast to signatures, however, for stamps little work has been done to automatically verify their authenticity. In this paper, an approach for verification of color stamps ...

  1. Electro-optic sampling at 90 degree interaction geometry for time-of-arrival stamping of ultrafast relativistic electron diffraction

    Directory of Open Access Journals (Sweden)

    C. M. Scoby

    2010-02-01

    Full Text Available In this paper we study a new geometry setup for electro-optic sampling (EOS where the electron beam runs parallel to the ⟨110⟩ face of a ZnTe crystal and the probe laser is perpendicular to it and to the beam path. The simple setup is used to encode the time-of-arrival information of a 3.5  MeV<10  pC electron bunch on the spatial profile of the laser pulse. The electric field lines inside the dielectric bend at an angle due to a relatively large (n∼3 index of refraction of the ZnTe crystal. We found theoretically and experimentally that the EOS signal can be maximized with a proper choice of incoming laser polarization angle. We achieved single-shot nondestructive measurement of the relative time of arrival between the pump and the probe beams thus improving the temporal resolution of ultrafast relativistic electron diffraction experiments.

  2. Stamping the Earth from space

    CERN Document Server

    Dicati, Renato

    2017-01-01

    This unique book presents a historical and philatelic survey of Earth exploration from space. It covers all areas of research in which artificial satellites have contributed in designing a new image of our planet and its environment: the atmosphere and ionosphere, the magnetic field, radiation belts and the magnetosphere, weather, remote sensing, mapping of the surface, observation of the oceans and marine environments, geodesy, and the study of life and ecological systems. Stamping the Earth from Space presents the results obtained with the thousands of satellites launched by the two former superpowers, the Soviet Union and the United States, and also those of the many missions carried out by the ESA, individual European countries, Japan, China, India, and the many emerging space nations. Beautifully illustrated, it contains almost 1100 color reproductions of philatelic items. In addition to topical stamps and thematic postal documents, the book provides an extensive review of astrophilatelic items. The most...

  3. The Relationship between Electronic Portfolio Participation and Student Success

    Science.gov (United States)

    Knight, William E.; Hakel, Milton D.; Gromko, Mark

    2006-01-01

    Electronic portfolios represent an assessment measure with strong potential for providing feedback about student performance to improve curricula and pedagogy, determining individual students' mastery of learning and providing feedback for improvement, and actively involving students in the assessment process. This study examined the relationship…

  4. Participation, Power, Critique: Constructing a Standard for Electronic Patient Records

    DEFF Research Database (Denmark)

    Bossen, Claus

    2006-01-01

      The scope of participatory design is discussed through the case of a national standard for electronic patient records (EPR) in Denmark. Currently within participatory design, the relationship between participatory methods and techniques on the one hand and critical and emancipatory aims...

  5. The STAMP Software for State Space Models

    Directory of Open Access Journals (Sweden)

    Roy Mendelssohn

    2011-05-01

    Full Text Available This paper reviews the use of STAMP (Structural Time Series Analyser, Modeler and Predictor for modeling time series data using state-space methods with unobserved components. STAMP is a commercial, GUI-based program that runs on Windows, Linux and Macintosh computers as part of the larger OxMetrics System. STAMP can estimate a wide-variety of both univariate and multivariate state-space models, provides a wide array of diagnostics, and has a batch mode capability. The use of STAMP is illustrated for the Nile river data which is analyzed throughout this issue, as well as by modeling a variety of oceanographic and climate related data sets. The analyses of the oceanographic and climate data illustrate the breadth of models available in STAMP, and that state-space methods produce results that provide new insights into important scientific problems.

  6. Time Stamps for Fixed-Point Approximation

    DEFF Research Database (Denmark)

    Damian, Daniela

    2001-01-01

    Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed-point approximat......Time stamps were introduced in Shivers's PhD thesis for approximating the result of a control-flow analysis. We show them to be suitable for computing program analyses where the space of results (e.g., control-flow graphs) is large. We formalize time-stamping as a top-down, fixed...

  7. Stamping SERS for creatinine sensing

    Science.gov (United States)

    Li, Ming; Du, Yong; Zhao, Fusheng; Zeng, Jianbo; Santos, Greggy M.; Mohan, Chandra; Shih, Wei-Chuan

    2015-03-01

    Urine can be obtained easily, readily and non-invasively. The analysis of urine can provide metabolic information of the body and the condition of renal function. Creatinine is one of the major components of human urine associated with muscle metabolism. Since the content of creatinine excreted into urine is relatively constant, it is used as an internal standard to normalize water variations. Moreover, the detection of creatinine concentration in urine is important for the renal clearance test, which can monitor the filtration function of kidney and health status. In more details, kidney failure can be imminent when the creatinine concentration in urine is high. A simple device and protocol for creatinine sensing in urine samples can be valuable for point-of-care applications. We reported quantitative analysis of creatinine in urine samples by using stamping surface enhanced Raman scattering (S-SERS) technique with nanoporous gold disk (NPGD) based SERS substrate. S-SERS technique enables label-free and multiplexed molecular sensing under dry condition, while NPGD provides a robust, controllable, and high-sensitivity SERS substrate. The performance of S-SERS with NGPDs is evaluated by the detection and quantification of pure creatinine and creatinine in artificial urine within physiologically relevant concentration ranges.

  8. Monitoring enzymatic degradation of pericellular matrices through SERS stamping

    Science.gov (United States)

    Yan, Bo; Hong, Yan; Chen, Tianhong; Reinhard, Björn M.

    2012-06-01

    We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix.We introduce a surface enhanced Raman spectroscopy (SERS) stamping approach for acquiring cell-surface specific vibrational spectra of individual living cells under physiological conditions. The SERS stamping approach utilizes a nanostructured metal surface on top of a lithographically defined piston that can be translated in 3-dimensions with nanometer resolution to contact living cells in solution with a pristine metal surface. We applied this approach to characterize the chemical composition of the cellular surface of living MCF7 breast cancer cells and to monitor its change upon addition of the enzyme hyaluronidase, which degrades major constituents of the pericellular matrix. Although the cell surface spectra show significant cell-to-cell fluctuations, a statistical barcode analysis of the spectra ensembles reveals systematic changes in the cell surface SERS spectra upon addition of hyaluronidase, which are consistent with a thinning of the pericellular matrix. Electronic supplementary information

  9. Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

    Science.gov (United States)

    Wang, Yuhuang [Evanston, IL; Hauge, Robert H [Houston, TX; Schmidt, Howard K [Houston, TX; Kim, Myung Jong [Houston, TX; Kittrell, W Carter [Houston, TX

    2009-09-08

    The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

  10. Can or can not? Electronic information sharing influence the participation behavior of the employees

    International Nuclear Information System (INIS)

    Mohammed, M. A.; Eman, Y.; Huda, I.; Thamer, A.

    2015-01-01

    Information sharing refers to information being shared between employees inside or outside an agency, or by providing accessibility of their information and data to other agencies so as to allow effective decision making. Electronic information sharing is a key to effective government. This study is conducted to investigate the factors of electronic information sharing that influence the participation behavior so as to augment it amongst the employees in public organizations. Eleven domains of factors that are considered in this study are benefits, risk, social network, Information stewardship, information quality, trust, privacy, reciprocity. The paper proposes electronic information sharing factors in public sector to increase the participation

  11. DISCOURSE AND PARTICIPATION IN ESL FACE-TO-FACE AND WRITTEN ELECTRONIC CONFERENCES

    Directory of Open Access Journals (Sweden)

    Michael Fitze

    2006-01-01

    Full Text Available This study was a comparative investigation of face-to-face and written electronic conferences. The participants were advanced English as a second language (hereafter: ESL students. The two types of conferences were compared in terms of textual features and participation. There was no statistically significant difference in the total number of words that students produced in an equivalent amount of time in the two types of conferences. The discourse in written electronic conferences displayed greater lexical range, and students in these conferences produced more discourse demonstrating interactive competence. The statistically significant finding of increased lexical range in written electronic conferences persisted even when the interactive discourse was eliminated from the conference transcripts and the transcripts were reanalyzed. This finding suggests that, during written electronic conferences, students were better able to use and practice a wider range of vocabulary related to the topics. For one of the groups, participation in written electronic conferences was more balanced among students, while for the other group participation was about equally balanced regardless of the conference setting. This last finding came as a surprise and points to a need for further research into variables that might mediate balanced participation in face-to-face and written electronic conferences.

  12. Participation Equality: Measurement Within Collaborative Electronic Environments-A Three Country Study

    OpenAIRE

    Zmud, Roberto W.; Mejias, Roberto J.; Reinig, Bruce A.; Martinez-Martinez, Isabel M.

    2001-01-01

    While the engendering of participation equality is generally viewed as a desirable group process attribute, findings from prior empirical research are both inconsistent and inconclusive regarding the measurement of participation equality within collaborative electronically supported environments. One explanation for this inconsistency lies in the manner in which the “participation equality” construct has been studied and measured. Results of analyses performed across three distinct national c...

  13. Evolutions of Advanced Stamping CAE — Technology Adventures and Business Impact on Automotive Dies and Stamping

    Science.gov (United States)

    Wang, Chuantao (C. T.)

    2005-08-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness), (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines), (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping.

  14. Evolutions of Advanced Stamping CAE -- Technology Adventures and Business Impact on Automotive Dies and Stamping

    International Nuclear Information System (INIS)

    Wang Chuantao

    2005-01-01

    In the past decade, sheet metal forming and die development has been transformed to a science-based and technology-driven engineering and manufacturing enterprise from a tryout-based craft. Stamping CAE, especially the sheet metal forming simulation, as one of the core components in digital die making and digital stamping, has played a key role in this historical transition. The stamping simulation technology and its industrial applications have greatly impacted automotive sheet metal product design, die developments, die construction and tryout, and production stamping. The stamping CAE community has successfully resolved the traditional formability problems such as splits and wrinkles. The evolution of the stamping CAE technology and business demands opens even greater opportunities and challenges to stamping CAE community in the areas of (1) continuously improving simulation accuracy, drastically reducing simulation time-in-system, and improving operationalability (friendliness) (2) resolving those historically difficult-to-resolve problems such as dimensional quality problems (springback and twist) and surface quality problems (distortion and skid/impact lines) (3) resolving total manufacturability problems in line die operations including blanking, draw/redraw, trim/piercing, and flanging, and (4) overcoming new problems in forming new sheet materials with new forming techniques. In this article, the author first provides an overview of the stamping CAE technology adventures and achievements, and industrial applications in the past decade. Then the author presents a summary of increasing manufacturability needs from the formability to total quality and total manufacturability of sheet metal stampings. Finally, the paper outlines the new needs and trends for continuous improvements and innovations to meet increasing challenges in line die formability and quality requirements in automotive stamping

  15. Impact of Electronic Portfolios on Prospective Teachers’ Participation, Motivation, and Autonomous Learning

    Directory of Open Access Journals (Sweden)

    Vanesa M. Gámiz-Sánchez

    2016-10-01

    Full Text Available This study explores the impact of electronic portfolios on undergraduate learning in higher education. Based on a descriptive study, it analyses the prospective teacher’s perception of use of these tools (electronic portfolio in Moodle-Mahara, in the institutional environment of a university in southern Europe, examining the variables participation, autonomous learning, and motivation. The results show no increase in motivation, but they do show an increase in autonomy, especially a progressive increase in the student’s online participation in a blended learning context. The results show a positive correlation between the variables participation and university student’s performance. Research into the uses and impact of electronic portfolios on undergraduates has implications for improving educational practice by fostering increased participation and autonomous learning.

  16. Stamp Detection in Color Document Images

    DEFF Research Database (Denmark)

    Micenkova, Barbora; van Beusekom, Joost

    2011-01-01

    , moreover, it can be imprinted with a variable quality and rotation. Previous methods were restricted to detection of stamps of particular shapes or colors. The method presented in the paper includes segmentation of the image by color clustering and subsequent classification of candidate solutions...... by geometrical and color-related features. The approach allows for differentiation of stamps from other color objects in the document such as logos or texts. For the purpose of evaluation, a data set of 400 document images has been collected, annotated and made public. With the proposed method, recall of 83...

  17. Bus Participation Factor Analysis for Harmonic Instability in Power Electronics Based Power Systems

    DEFF Research Database (Denmark)

    Ebrahimzadeh, Esmaeil; Blaabjerg, Frede; Wang, Xiongfei

    2018-01-01

    power converters and buses are more sensitive and have significant contribution to the harmonic instability. In the approach, a power electronics based system is introduced as a Multi-Input Multi-Output (MIMO) dynamic system by means of a dynamic admittance matrix. Bus Participation Factors (PFs......) are calculated by the oscillatory mode sensitivity analysis versus the elements of the MIMO transfer function matrix. The PF analysis detects which power electronic converters or buses have a higher participation in harmonic instability excitation than others or at which buses such instability problems have...

  18. Participation

    African Journals Online (AJOL)

    chifaou.amzat

    2011-08-02

    Aug 2, 2011 ... Theorising the Intersection of Public Policy and. Personal Lives through the Lens of. 'Participation'. Nana Akua Anyidoho*. Abstract. The continued interest in political economy-inspired perspectives on economic and social policies is an attempt to understand policymakers as human beings who are ...

  19. METAMORPHOSES OF THE ENVIRONMENTAL STAMP IN ROMANIA

    Directory of Open Access Journals (Sweden)

    CARAUS MADALINA

    2015-12-01

    Full Text Available Romania's alignment to European standards is a difficult process with many legislative changes, with direct impact on taxpayers. The necessity of collecting substantial revenues to the State budget, which provide vital economic growth of the Romanian State, loses the substance when we are talking about taxes levied in relation to taxpayer. The environmental stamp, otherwise a controversial tax, represent for the State another way to earn revenue in advance, “as a loan", because in the end it's forced to repay the amounts concerned taxpayers, under the effect of a final and irrevocable court decision. The effects of the legislative changes bring every time complaints both from taxpayers, because they can demand repayment of the environmental stamp only during the period of prescription, as well as on the part of public servants who are grappling with a large volume of work, with the possibility of overcoming the term to handle requests. An equitable solution in solving these distortions would be the inclusion of the environmental stamp within the tax on means of transport, tax that is paid annually by vehicle owners. At the moment the level of the environmental stamp is calculated depending on the CO2 emissions, exhaust emissions and the age of the vehicle. Tax on means of transport is calculated based on engine capacity, an amount determined by CO2 emissions multiplying with each group of 200 cc or fraction on it. Therefore the unification of the two taxes would create a balance for all categories of vehicles.

  20. Stamping Die Making. 439-318/320.

    Science.gov (United States)

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  1. Fast thermal nanoimprint lithography by a stamp with integrated heater

    DEFF Research Database (Denmark)

    Tormen, Massimo; Malureanu, Radu; Pedersen, Rasmus Haugstrup

    2008-01-01

    We propose fast nanoimprinting lithography (NIL) process based on the use of stamps with integrated heater. The latter consists of heavily ion implantation n-type doped silicon layer buried below the microstructured surface of the stamp. The stamp is heated by Joule effect, by 50 μs 25 Hz...

  2. Ex-Post : The Investment Performance of Collectible Stamps

    NARCIS (Netherlands)

    Dimson, E.; Spaenjers, C.

    2009-01-01

    This paper investigates the returns on British collectible postage stamps over the very long run, based on stamp catalogue prices. Between 1900 and 2008, we find an annualized return on stamps of 6.7% in nominal terms, which is equivalent to an average real return of 2.7% per annum. Prices have

  3. Bus Participation Factor Analysis for Harmonic Instability in Power Electronics Based Power Systems

    DEFF Research Database (Denmark)

    Ebrahimzadeh, Esmaeil; Blaabjerg, Frede; Wang, Xiongfei

    2018-01-01

    power converters and buses are more sensitive and have significant contribution to the harmonic instability. In the approach, a power electronics based system is introduced as a Multi-Input Multi-Output (MIMO) dynamic system by means of a dynamic admittance matrix. Bus Participation Factors (PFs...

  4. Participation of Low Molecular Weight Electron Carriers in Oxidative Protein Folding

    Directory of Open Access Journals (Sweden)

    József Mandl

    2009-03-01

    Full Text Available Oxidative protein folding is mediated by a proteinaceous electron relay system, in which the concerted action of protein disulfide isomerase and Ero1 delivers the electrons from thiol groups to the final acceptor. Oxygen appears to be the final oxidant in aerobic living organisms, although the existence of alternative electron acceptors, e.g. fumarate or nitrate, cannot be excluded. Whilst the protein components of the system are well-known, less attention has been turned to the role of low molecular weight electron carriers in the process. The function of ascorbate, tocopherol and vitamin K has been raised recently. In vitro and in vivo evidence suggests that these redox-active compounds can contribute to the functioning of oxidative folding. This review focuses on the participation of small molecular weight redox compounds in oxidative protein folding.

  5. Hot stamping advanced manufacturing technology of lightweight car body

    CERN Document Server

    Hu, Ping; He, Bin

    2017-01-01

    This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers...

  6. Hot stamping of AA7075 aluminum sheets

    Science.gov (United States)

    Mendiguren, J.; Saenz de Argandona, E.; Galdos, L.

    2016-11-01

    In this work the formability of a high strength aluminium alloy (AA7075-T6) for the stamping of an automotive component has been studied. Due to the low formability of the selected alloy, two different heat assisted forming strategies have been analysed. On the one hand, the W-temper process, where the thermal process is carried out prior to the forming operation. On the other hand, the hot stamping process, where the thermal process is carried out at the same time as the forming. The results showed that both technology were able to form the component avoiding any failure of the material. On the contrary, both processes reduced the final mechanical properties of the material compared to the as received material condition. However, the obtained mechanical properties doubled the strength of commonly used 5xxx and 6xxx aluminium alloys.

  7. Fabrication of a metallic roll stamp with low internal stress and high hardness for large area display applications by a pulse reverse current electroforming process

    International Nuclear Information System (INIS)

    Kim, Joongeok; Han, Jungjin; Kim, Taekyung; Kang, Shinill

    2014-01-01

    With the increasing demand for large scale micro/nano components in the fields of display, energy and electrical devices, etc, the establishment of a roll imprinting process has become a priority. The fabrication of a roll stamp with high dimensional accuracy and uniformity is one of the key issues in the roll imprinting process, because the roll stamp determines the properties of the replicated micro/nano structures. In this study, a method to fabricate a metallic roll stamp with low internal stress, high flatness, and high hardness was proposed by a pulse reverse current (PRC) electroforming process. The effects of PRC electroforming processes on the internal stress, hardness, and grain size of the electroformed stamp were examined, and the optimum process conditions were suggested. As a practical example of the proposed method, various micro-patterns for electronic circuits were fabricated via the roll imprinting process using a PRC electroformed stamp. (paper)

  8. DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

    Directory of Open Access Journals (Sweden)

    Rudi Kurniawan Arief

    2017-12-01

    Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

  9. Effect of Electronic Messaging on Physical Activity Participation among Older Adults

    Directory of Open Access Journals (Sweden)

    Chantrell Antoine Parker

    2016-01-01

    Full Text Available The purpose of this study was to determine if electronic messaging would increase min of aerobic physical activity (PA among older adults. Participants were active older adults (n=28; M age = 60 years, SD = 5.99, and range = 51–74 years. Using an incomplete within-subjects crossover design, participants were randomly assigned to begin the 4-week study receiving the treatment condition (a morning and evening text message or the control condition (an evening text message. Participants self-reported min of completed aerobic PA by cell phone text. The 1-way within-subjects ANOVA showed significant group differences (p<0.05. Specifically, when participants were in the treatment condition, they reported significantly greater average weekly min of aerobic PA (M = 96.88 min, SD = 62.9 compared to when they completed the control condition (M = 71.68 min, SD = 40.98. Electronic messaging delivered via cell phones was effective at increasing min of aerobic PA among older adults.

  10. How Do Stamp Duties Affect the Housing Market?

    OpenAIRE

    Davidoff, Ian; Leigh, Andrew

    2013-01-01

    Land transfer taxes are a substantial portion of the cost of moving house in many developed countries. Since stamp duties are endogenous with respect to the house price, we create an instrumental variable that is the stamp duty on a property, given that postcode's starting house price and the national house price trend. In a specification with postcode and year fixed effects, this instrument effectively captures policy changes and nonlinearities in the stamp duty schedule. We find that the im...

  11. New Evaluation of the Electronically Activated Recorder (EAR: Obtrusiveness, Compliance, and Participant Self-selection Effects

    Directory of Open Access Journals (Sweden)

    Joseph H. Manson

    2017-04-01

    Full Text Available The Electronically Activated Recorder (EAR is a method for collecting periodic brief audio snippets of participants’ daily lives using a portable recording device. The EAR can potentially intrude into people’s privacy, alter their natural behavior, and introduce self-selection biases greater than in other types of social science methods. Previous research (Mehl and Holleran, 2007, hereafter M&H has shown that participant non-compliance with, and perceived obtrusiveness of, an EAR protocol are both low. However, these questions have not been addressed in jurisdictions that require the consent of all parties to recording conversations. This EAR study required participants to wear a button bearing a microphone icon and the words “This conversation may be recorded” to comply with California’s all-party consent law. Results revealed self-reported obtrusiveness and non-compliance were actually lower in the present study than in the M&H study. Behaviorally assessed non-compliance did not differ between the two studies. Participants in the present study talked more about being in the study than participants in the M&H study, but such talk still comprised <2% of sampled conversations. Another potential problem with the EAR, participant self-selection bias, was addressed by comparing the EAR volunteers’ HEXACO personality dimensions to a non-volunteer sample drawn from the same student population. EAR volunteers were significantly and moderately higher in Conscientiousness, and lower in Emotionality, than non-volunteers. In conclusion, the EAR method can be successfully implemented in at least one all-party consent state (California. Interested researchers are encouraged to review this procedure with their own legal counsel.

  12. Does the Food Stamp Program cause obesity? A realist review and a call for place-based research.

    Science.gov (United States)

    DeBono, Nathaniel L; Ross, Nancy A; Berrang-Ford, Lea

    2012-07-01

    The high prevalence of obesity among low income groups has led some to question the role of food assistance programs in contributing to the problem. The USDA's Food Stamp Program (now known as the Supplemental Nutrition Assistance Program - SNAP) is the largest food assistance program in the United States with over 40 million participants. This paper employed systematic realist review methods to determine whether participation in the Food Stamp Program causes obesity and the causal pathways through which this relationship may exist. Findings indicate a more consistent positive relationship for women than for men, especially for women who are long term users of the program. All studies discussed the "food stamp cycle" and an "income effect" as explanations for the role of food stamps in increased obesity yet evidence for these factors is limited. Curiously, the research in this field does not address obesogenic environments and we suggest that the absence of an understanding of household behavior in local contexts is a significant impediment to the reform of the Food Stamp Program. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Patient perspectives on electronic health record accessibility and patient participation: a questionnaire survey.

    Science.gov (United States)

    Vermeir, Peter; Degroote, Sophie; Van Tiggelen, Hanne; Vandijck, Dominique; Peleman, Renaat; Verhaeghe, Rik; Mariman, An; Vermeersch, Hubert; Vogelaers, Dirk

    2018-02-12

    Objectives To explore patient perceptions on personal comfort with participation in their own care process and on support of this patient participation through electronic health record (EHR) accessibility. Methods Explorative quantitative questionnaire study in ambulatory patients visiting the departments of General Internal Medicine or Head, Neck and Maxillo-Facial Surgery of a Belgian tertiary referral center. Results Patients were recruited by convenience sampling of 438 out of the total of 1270 patients visiting either one of these departments within a time period of two weeks. Overall response rate was 97.3% (n = 426; 45.3% male; mean age 42.5 ± 15.4 years). Most patients (89.7%) indicated a desire to make healthcare decisions in partnership with their physician. They were in need of transparent and comprehensible health information. The EHR was perceived as a suitable and effective means to inform patients about their health and to increase involvement in care and treatment (77.6%). Furthermore, access to the EHR was perceived to result in a more effective communication transfer between physician and patient (65.5%), increased patient compliance (64.3%), and satisfaction (57.4%). Conclusion Patients indicate a desire for proactive participation in their individual care process. They felt that medical record accessibility could support decision-making and assist in managing and coordinating individual and personalized care choices.

  14. Stamp duties in Indian states - a case for reform

    OpenAIRE

    Alm, James; Annez, Patricia; Modi, Arbind

    2004-01-01

    The authors review the options for reform of stamp duties on immovable property transfers collected by Indian state governments. After briefly reviewing some of the many administrative difficulties experienced with the tax, they turn to an examination of its economic impacts. A review of stamp duties internationally indicates that Indian rates are exceptionally high, at rates often above 1...

  15. Design and Development of a Soap Stamping and Tableting ...

    African Journals Online (AJOL)

    A soap stamping and tableting machine comprising a printing die/pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205 soap tablets per hour with an ...

  16. Healthcare Reimbursement and Quality Improvement: Integration Using the Electronic Medical Record; Comment on “Fee-for-service Payment - an Evil Practice That Must Be Stamped Out?”

    Directory of Open Access Journals (Sweden)

    John R. Britton

    2015-08-01

    Full Text Available Reimbursement for healthcare has utilized a variety of payment mechanisms with varying degrees of effectiveness. Whether these mechanisms are used singly or in combination, it is imperative that the resulting systems remunerate on the basis of the quantity, complexity, and quality of care provided. Expanding the role of the electronic medical record (EMR to monitor provider practice, patient responsiveness, and functioning of the healthcare organization has the potential to not only enhance the accuracy and efficiency of reimbursement mechanisms but also to improve the quality of medical care.

  17. A cracked beam or plate transversely loaded by a stamp

    Science.gov (United States)

    Nied, H. F.; Erdogan, F.

    1979-01-01

    In this paper the problem of an infinite elastic beam or a plate containing a crack is considered. The medium is loaded transversely through a stamp which may be rigid or elastic. The problem is a coupled crack-contact problem which cannot be solved by treating the crack and contact problems separately and by using a superposition technique. First the Green's functions for the general case are obtained. Then the integral equations for a cracked infinite strip loaded by a frictionless stamp are obtained. With the question of fracture in mind, the primary interest in the paper has been in calculating the stress intensity factors. The results are given for a rigid flat stamp with sharp edges and for an elastic curved stamp. The effect of friction at the supports on the stress intensity factors is also studied and a numerical example is given.

  18. design and development of a soap stamping and tableting machine

    African Journals Online (AJOL)

    2012-07-02

    pattern inscriptioner, cutting blade, conveyor belt, and two electric motors was developed and tested. Performance test analysis conducted showed that the machine operated with an optimal stamping/tableting capacity of 10205.

  19. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    International Nuclear Information System (INIS)

    Altun, Ali Ozhan; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-01-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75 0 . The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin

  20. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Energy Technology Data Exchange (ETDEWEB)

    Altun, Ali Ozhan [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Jeong, Jun-Ho [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Rha, Jong-Joo [Surface Technology Research Center, Korea Institute of Machinery and Materials, 66 Sangnam-Dong, Changwon-Shi, Kyungnam-Do (Korea, Republic of); Kim, Ki-Don [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of); Lee, Eung-Sug [Nano-Mechanical Systems Research Center, Korea Institute of Machinery and Materials, 171 Jang-dong, Yuseung-gu, Daejeon 305-343 (Korea, Republic of)

    2007-11-21

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75{sup 0}. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  1. Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

    Science.gov (United States)

    Ozhan Altun, Ali; Jeong, Jun-Ho; Rha, Jong-Joo; Kim, Ki-Don; Lee, Eung-Sug

    2007-11-01

    Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70 86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75°. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

  2. Why Stamp Duties are an Increasing Financial Burden on Australian Home Buyers

    OpenAIRE

    Wood, Gavin A.

    1994-01-01

    The purchaser of housing incurs stamp duty liabilities in all Australian States. These stamp duties are levied on the conveyance of residential property and mortgage sums secured. In general, stamp duties were a growing financial burden on home buyers during the period 1985-1991. This paper examines the role of house price inflation in causing increases in average rates of stamp duty, the responsiveness of average rates of stamp duty to future changes in the nominal tax base and the effective...

  3. Impact of Electronic Portfolios on Prospective Teachers' Participation, Motivation, and Autonomous Learning

    Science.gov (United States)

    Gámiz-Sánchez, Vanesa-María; Gallego-Arrufat, María-Jesús; Crisol-Moya, Emilio

    2016-01-01

    This study explores the impact of electronic portfolios on undergraduate learning in higher education. Based on a descriptive study, it analyses the prospective teacher's perception of use of these tools (electronic portfolio in Moodle-Mahara, in the institutional environment of a university in southern Europe), examining the variables…

  4. Do Food Stamps without Education Improve the Nutrient Intake and Food-Related Behaviors of Recipients? Food Assistance Needs of the South's Vulnerable Populations.

    Science.gov (United States)

    Cason, Katherine L.; Cox, Ruby H.; Burney, Janie L.

    This study examined the effect of food assistance on the dietary patterns of households in South Carolina, Tennessee, and Virginia. Data was collected from 6,969 participants in the Expanded Food and Nutrition Education Program (EFNEP) and 3,552 participants in the Food Stamp Nutrition Education Program (FSNEP). EFNEP and FSNEP teach low-income…

  5. "Stamp-off" to micropattern sparse, multicomponent features.

    Science.gov (United States)

    Desai, Ravi A; Rodriguez, Natalia M; Chen, Christopher S

    2014-01-01

    Spatially patterned subtractive de-inking, a process we term "stamp-off," provides a simple method to generate sparse, multicomponent protein micropatterns. It has been applied to control cell adhesion, study adhesion biology, as well as to micropattern fragile surfaces. This technique can also readily be applied to study nanoscale interactions between cell membrane receptors and surface-immobilized ligands. It is based on conventional microcontact printing and as such requires the same reagents, including photolithographically defined masters, a spin-coater, poly(dimethyl siloxane) (PDMS), and conventional cell culture reagents such as glass coverslips and adhesive proteins. Stamp-off is conceptually simplified into three steps: (1) generation of an appropriate cell culture substrate, PDMS-coated glass, (2) micropatterning with stamp-off, and (3) cell deposition. After elaborating each of these three methods, we discuss limitations of the technique and its applications. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. Optimum utilization of low ash carbonaceous constituents in stamp charging

    Energy Technology Data Exchange (ETDEWEB)

    Dash, P.S.; Krishnan, S.H.; Sharma, R. [Tata Steel, Jamshedpur (India)

    2004-07-01

    To produce high strength coke at reasonable cost, Tata Steel went for stamp charging along with 40-45% imported coal. It is imperative to design the base stamp charge coal blend so as to possess enough fluidity to assimilate these infusible inerts and still produce coke with high coke strength after reaction (CSR). This paper describes the scope of utilising low ash carbonaceous inerts like fluid coke (a petroleum coke made in a fluidized bed) and anthracite optimally in the stamp charging blend by replacing the present imported semi-soft coal with high fluidity imported coals. The laboratory scale experimentation and its results regarding improvement in coke properties and yield are also described. 5 refs., 2 figs., 3 tabs.

  7. Time Stamp Synchronization of PEFP Distributed Control Systems

    International Nuclear Information System (INIS)

    Song, Young Gi; An, Eun Mi; Kwon, Hyeok Jung; Cho, Yong Sub

    2010-01-01

    Proton Engineering Frontier Project (PEFP) proton linac consists of several types of control systems, such as soft Input Output Controllers (IOC) and embedded IOC based on Experimental Physics Industrial Control System (EPICS) for each subsection of PEFP facility. One of the important factors is that IOC's time clock is synchronized. The synchronized time and time stamp can be achieved with Network Time Protocol (NTP) and EPICS time stamp record without timing hardware. The requirement of the time accuracy of IOCs is less than 1 second. The main objective of this study is to configure a master clock and produce Process Variable (PV) time stamps using local CPU time synchronized from the master clock. The distributed control systems are attached on PEFP control network

  8. Employees’ participation in electronic networks of practice within a corporate group: perceived benefits and costs

    NARCIS (Netherlands)

    Sedighi, M.; Lukosch, S.G.; van Splunter, S.; Brazier, F.M.; Hamedi, Mohsen; van Beers, C.P.

    2017-01-01

    This paper explores benefits and costs of knowledge exchange perceived by individuals in connected electronic networks of practice (ENoP) in a corporate setting. The results of 25 semi-structured interviews show 9 perceived benefits and 5 perceived costs to be of importance for knowledge exchange.

  9. Improving Care Transitions Management: Examining the Role of Accountable Care Organization Participation and Expanded Electronic Health Record Functionality.

    Science.gov (United States)

    Huber, Thomas P; Shortell, Stephen M; Rodriguez, Hector P

    2017-08-01

    Examine the extent to which physician organization participation in an accountable care organization (ACO) and electronic health record (EHR) functionality are associated with greater adoption of care transition management (CTM) processes. A total of 1,398 physician organizations from the third National Study of Physician Organization survey (NSPO3), a nationally representative sample of medical practices in the United States (January 2012-May 2013). We used data from the third National Study of Physician Organization survey (NSPO3) to assess medical practice characteristics, including CTM processes, ACO participation, EHR functionality, practice type, organization size, ownership, public reporting, and pay-for-performance participation. Multivariate linear regression models estimated the extent to which ACO participation and EHR functionality were associated with greater CTM capabilities, controlling for practice size, ownership, public reporting, and pay-for-performance participation. Approximately half (52.4 percent) of medical practices had a formal program for managing care transitions in place. In adjusted analyses, ACO participation (p management of care transitions by physician organizations. © Health Research and Educational Trust.

  10. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; Wazny, Scott; Kaunitz, Leon; Waldron, Douglas J.

    2006-02-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir welded aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  11. The Formability of Friction Stir Welds in Automotive Stamping Environments

    Energy Technology Data Exchange (ETDEWEB)

    Grant, Glenn J.; Davies, Richard W.; Stephens, Elizabeth V.; wazny, scott; Kaunitz, Leon; Waldron, D.

    2005-04-01

    Automobile body and truck cab structures are composed primarily of stampings formed from monolithic and constant gage blanks. Cost and weight penalties can arrise when strength or other requirements in one small area of the part leads to the use of a material or gage that is overmatched to the needs of the rest of the stamping. Tailor Welded Blanks (TWBs) are hybrid sheet products composed of either different materials or different thickness sheets that are joined together, then subjected to a stamping operation to create a formed assembly. The strategy is employed generally to save weight and material costs in the formed assembly by placing higher strength or thicker sections only where needed. The forming or stamping process requires the joint to be severely deformed along with the parent sheets. Aluminum TWBs for automotive applications are particularly problematic because of the low formability of aluminum weld metal. Friction Stir Welding (FSW) is a process recently applied to Aluminum TWBs that has the potential to produce a higher quality weld. The current study presents data on the mechanical properties, formability, and FSW weld process parameter development for friction stir woined, aluminum, Tailor Welded Blanks. Friction stir welded TWBs can be shown to have higher formability, higher ductility, and lower defect content than many competing joining processes, and they can be fabricated at speeds appropriate for automotive manufacturing.

  12. Modelling the deformation process of flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard

    The present thesis is devoted to numerical modelling of the deformation process of flexible stamps for nanoimprint lithography (NIL). The purpose of those models is to be able to predict the deformation and stretch of the flexixble stamps in order to take that into account when designing the plan...... 2D silicon master used in the NIL process. Two different manufacturing processes are investigated; (i) Embossing of an electroplated nickel foil into a hydrogen silsesquioxane (HSQ) polymer resist on a double-curved surface, (ii) NIL of a flexible polytetrafluoroethylene (PTFE) stamps...... into a polymethyl methacrylate (PMMA) resist. Challenges comprise several non-linear phenomena. First of all geometrical non-linearities arising from the inherent large strains and deformations during the process are modelled. Then, the constitutive behaviors of the nickel foil and the PTFE polymer during...... deformation are addressed. This is achieved by a general elasto-plastic description for the nickel foil and a viscoelastic-viscoplastic model for the PTFE material, in which the material parameters are found. Last, the contact conditions between the deforming stamp and the injection moulding tool insert...

  13. 46 CFR 53.10-10 - Certification by stamping.

    Science.gov (United States)

    2010-10-01

    ... boilers shall be as indicated in HG-530 of section IV of the ASME Boiler and Pressure Vessel Code... 46 Shipping 2 2010-10-01 2010-10-01 false Certification by stamping. 53.10-10 Section 53.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING HEATING BOILERS Tests...

  14. 41 CFR 101-25.103-3 - Trading stamps or bonus goods received from contractors.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Trading stamps or bonus... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.103-3 Trading stamps or bonus goods received from contractors. When contracts contain a price reduction clause, any method (such as trading stamps or bonus...

  15. 26 CFR 301.7209-1 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Unauthorized use or sale of stamps. 301.7209-1... § 301.7209-1 Unauthorized use or sale of stamps. (a) Any person who buys, sells, offers for sale, uses... regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device prescribed by the...

  16. Efficient methods of nanoimprint stamp cleaning based on imprint self-cleaning effect

    International Nuclear Information System (INIS)

    Meng Fantao; Chu Jinkui; Luo Gang; Zhou Ye; Carlberg, Patrick; Heidari, Babak; Maximov, Ivan; Montelius, Lars; Xu, H Q; Nilsson, Lars

    2011-01-01

    Nanoimprint lithography (NIL) is a nonconventional lithographic technique that promises low-cost, high-throughput patterning of structures with sub-10 nm resolution. Contamination of nanoimprint stamps is one of the key obstacles to industrialize the NIL technology. Here, we report two efficient approaches for removal of typical contamination of particles and residual resist from stamps: thermal and ultraviolet (UV) imprinting cleaning-both based on the self-cleaning effect of imprinting process. The contaminated stamps were imprinted onto polymer substrates and after demolding, they were treated with an organic solvent. The images of the stamp before and after the cleaning processes show that the two cleaning approaches can effectively remove contamination from stamps without destroying the stamp structures. The contact angles of the stamp before and after the cleaning processes indicate that the cleaning methods do not significantly degrade the anti-sticking layer. The cleaning processes reported in this work could also be used for substrate cleaning.

  17. Electronic Origin and Kinetic Feasibility of the Lattice Oxygen Participation During the Oxygen Evolution Reaction on Perovskites.

    Science.gov (United States)

    Yoo, Jong Suk; Liu, Yusu; Rong, Xi; Kolpak, Alexie M

    2018-04-05

    Density functional theory is employed to investigate the electronic origin and feasibility of surface lattice oxygen (O surf ) participation during the oxygen evolution reaction (OER) on perovskites. O surf participation occurs via the nonelectrochemical pathway in which adsorbed atomic oxygen (O*) diffuses from the transition-metal site to the oxygen site, and then O surf shifts out of the surface plane to react with O* to form O surf -O* and a surface oxygen vacancy. The different thermodynamic driving forces of O surf participation on LaMO 3-δ (M = Ni, Co, and Cu) are explained by the changes in the oxidation state of the transition-metal site throughout the reaction. We show that O surf participation on LaNiO 3 cannot be hindered by O surf protonation in the OER potential range. By including the coverage effect and utilizing the implicit solvent model, we finally show that lattice oxygen mechanism is more feasible than the conventional mechanism for OER on LaNiO 3 .

  18. Soil Temperature and Moisture Profile (STAMP) System Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Cook, David R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    The soil temperature and moisture profile system (STAMP) provides vertical profiles of soil temperature, soil water content (soil-type specific and loam type), plant water availability, soil conductivity, and real dielectric permittivity as a function of depth below the ground surface at half-hourly intervals, and precipitation at one-minute intervals. The profiles are measured directly by in situ probes at all extended facilities of the SGP climate research site. The profiles are derived from measurements of soil energy conductivity. Atmospheric scientists use the data in climate models to determine boundary conditions and to estimate the surface energy flux. The data are also useful to hydrologists, soil scientists, and agricultural scientists for determining the state of the soil. The STAMP system replaced the SWATS system in early 2016.

  19. Reactive wet stamping for patterning of polyelectrolyte multilayers.

    Science.gov (United States)

    Cho, Chungyeon; Valverde, Lauralee; Ozin, Geoffrey A; Zacharia, Nicole S

    2010-08-17

    Patterning of soft films, especially their bulk and not only their surface properties, presents a challenge. Several lithographic techniques do exist, but many of them are complex or limited in their ability to change properties. A few methods of patterning polyelectrolyte multilayers (PEM) have been reported, including microcontact printing and selectively growing layers on patterned self-assembled monolayers, but these all come with certain limitations. We present here the use of a modified microcontact printing method, reactive wet stamping (r-WETs), using a hydrogel stamp soaked in aqueous solutions to create patterns in PEMs. With this technique we are able to locally cause swelling and porosity changes in the PEM films and use our method to qualitatively study the evolution of the porous film morphology. This technique has the potential to locally control chemical functionality, film thickness, and mechanical properties, leading to a new ability to control film architectures both at the film surface and within the bulk of the film.

  20. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    OpenAIRE

    Pasquale Russo Spena

    2017-01-01

    This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests wer...

  1. Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

    Science.gov (United States)

    Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

    2015-05-29

    Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.

  2. Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on microstructure and mechanical properties

    International Nuclear Information System (INIS)

    Li, Xiaodong; Chang, Ying; Wang, Cunyu; Hu, Ping; Dong, Han

    2017-01-01

    The application of high strength steels (HSS) for automotive structural parts is an effective way to realize lightweight and enhance safety. Therefore, improvements in mechanical properties of HSS are needed. In the present study, the warm stamping process of the third generation automotive medium-Mn steel was discussed, the characteristics of martensitic transformation were investigated, as well as the microstructure and mechanical properties were analyzed, compared to the popular hot-stamped 22MnB5 steel in the automotive industry. The results are indicated as follows. Firstly, the quenching rate of the medium-Mn steel can be selected in a wide range based on its CCT curves, which is beneficial to the control of forming process. Secondly, the influence of stamping temperature and pressure on the M s temperature of the medium-Mn steel is not obvious and can be neglected, which is favorable to the even distribution of martensitic microstructure and mechanical properties. Thirdly, the phenomenon of decarbonization is hardly found on the surface of the warm-stamped medium-Mn steel, and the ultra-fine-grained microstructure is found inside the medium-Mn steel after warm stamping. Besides, the warm-stamped medium-Mn steel holds the better comprehensive properties, such as a lower yield ratio, higher total elongation and higher tear toughness than the hot-stamped 22MnB5 steel. Furthermore, an actual warm-stamped B-pillar of medium-Mn steel is stamped and ultra-fine-grained martensitic microstructure is obtained. The mechanical properties are evenly distributed. As a result, this paper proves that the warm-stamped medium-Mn steel part can meet the requirements of lightweight and crash safety, and is promising for the industrial production of automotive structural parts.

  3. A comparison of electronic and manual dynamometry and goniometry in patients with fracture of the distal radius and healthy participants.

    Science.gov (United States)

    Plant, Caroline E; Parsons, Nicholas R; Edwards, Alison T; Rice, Hayley; Denninson, Kate; Costa, Matthew L

    2016-01-01

    The purpose of this study was to assess the intra-rater and inter-rater reliability of electronic and manual dynamometry and goniometry in healthy volunteers, and the inter-instrument reliability in the assessment of healthy volunteers and patients recovering after a fracture of the distal radius. Grip strength, grip fatigue, pinch strength and range of motion were assessed in all participants with both the manual and electronic instruments by two physiotherapists and orthopaedic specialist trainee. The measures of dynamometry demonstrated excellent reliability (intra-class correlation coefficient >0.90), with the instruments found to be interchangeable with the exception of the grip fatigue. Variable intra-rater and inter-rater reliability was demonstrated with all planes of movement for the goniometry measures regardless of the instrument used. The results of this study support the continued use of dynamometry in the clinical setting, but raise questions regarding the use of goniometry measurements. Diagnostic level III. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

  4. Mathematical Modeling of Hydroelastic Oscillations of the Stamp and the Plate, Resting on Pasternak Foundation

    Science.gov (United States)

    Mogilevich, L. I.; Popov, V. S.; Popova, A. A.; Christoforova, A. V.

    2018-01-01

    The forced oscillations of the elastic fixed stamp and the plate, resting on Pasternak foundation are studied. The oscillations are caused by pressure pulsation in liquid layer between the stamp and the plate. Pasternak model is chosen as an elastic foundation. The laws of the stamp movement, the plate deflection and pressure in the liquid are discovered on the basis of hydroelasticity problem analytical solution. The functions of amplitude deflection distribution and liquid pressure along the plate are constructed, as well as the stamp amplitude-frequency characteristic. The obtained mathematical model allows to investigate the dynamics of hydroelastic interaction of the stamp with the plate, resting on elastic foundation, to define resonance frequencies of the plate and the stamp and corresponding deflections amplitudes, as well as liquid presser amplitudes.

  5. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    OpenAIRE

    Nosova Ekaterina; Erisov Yaroslav; Grechnikov Fedor

    2017-01-01

    Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strai...

  6. 49 CFR 238.119 - Rim-stamped straight-plate wheels.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Rim-stamped straight-plate wheels. 238.119 Section... Requirements § 238.119 Rim-stamped straight-plate wheels. (a)(1) Except as provided in paragraph (a)(2) of this... than a private car, that is equipped with a rim-stamped straight-plate wheel if a brake shoe acts on...

  7. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    OpenAIRE

    Ji Kang; Liu Xiaochuan; El Fakir Omer; Liu Jun; Zhang Qunli; Wang Liliang

    2016-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values betwe...

  8. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    OpenAIRE

    Liu Xiaochuan; Ji Kang; Fakir Omer El; Liu Jun; Zhang Qunli; Wang Liliang

    2015-01-01

    The interfacial heat transfer coefficient (IHTC) is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a h...

  9. Minerals on postage stamps: A mix of art, history, economics and geography

    Science.gov (United States)

    Glover, Paul

    2010-05-01

    Most people would agree that minerals represent some of the most beautiful natural objects known to mankind, especially in the form of precious and semi-precious gemstones. It is hardly surprising, therefore, that they are often illustrated on stamps. Examples are the fine crystalline forms represented as coloured etchings in the French 1986 issue, and the stylized simplicity of the mineral stamps that were part of the Swiss Pro Patria series, issued annually between 1958 and 1961. I aim in this presentation to introduce the beautiful world of mineral illustrations on stamps. The talk cannot be comprehensive because of the very large number of minerals and stamps concerned, but it will introduce the range of minerals depicted on stamps, then look in some greater detail at several sets from France, Southern Africa and East Germany. Minerals become the subject of sets of stamps for many reasons. In many cases, it is part of an attempt by the particular national post office to depict the whole of the natural history of their country in stamp form - a statement of nationality and politics. The 1986 French issue was an example which followed sets of stamps that had already portrayed insects, flowers, trees and birds native to France. We also find that certain countries have produced several sets of stamps to mark the importance to their economy of mining particular minerals. Many African states depend upon minerals for much of their wealth and economic power, explaining why, for instance, Sierra Leone issued over 35 stamps on the subject of diamonds between 1965 and 1978, and why over 77% of mineral stamps come from countries with major mining interests. Countries with traditional links with the history of the study of geology and mining also produce mineral stamps. These are usually European countries with a long record of the study of the Earth, such as Germany and Switzerland. Curiously enough, though, despite its fine tradition of geological observation and research

  10. Simulation Study on Hot Stamping Forming of the Drive Axle Housing of Heavy Truck

    Science.gov (United States)

    Dai, Yongqian; Ji, Jianyi; Luo, Lingjiang

    2018-01-01

    Aiming at the national energy-saving and emission reduction requirements, lightweight of the heavy truck is imminent. Several parameters related to hot stamping forming process of heavy truck drive axle housing are studied in this paper. The results show that the existing two-step stamping with air cooling molding process, can be improved into one-step hot stamping process. The initial temperature of the blank, stamping speed and other parameters related to the forming process were optimized. The results provides useful reference for improving the existing forming process of the drive axle housing, and it is also helpful for realizing the lightweight design of drive axle housing.

  11. Serial and parallel Si, Ge, and SiGe direct-write with scanning probes and conducting stamps

    Energy Technology Data Exchange (ETDEWEB)

    Vasko, Stephanie E.; Kapetanovic, Adnan; Talla, Vamsi; Brasino, Michael D.; Zhu, Zihua; Scholl, Andreas; Torrey, Jessica D.; Rolandi, Marco

    2011-05-16

    Precise materials integration in nanostructures is fundamental for future electronic and photonic devices. We demonstrate Si, Ge, and SiGe nanostructure direct-write with deterministic size, geometry, and placement control. The biased probe of an atomic force microscope (AFM) reacts diphenylsilane or diphenylgermane to direct-write carbon-free Si, Ge, and SiGe nano and heterostructures. Parallel directwrite is available on large areas by substituting the AFM probe with conducting microstructured stamps. This facile strategy can be easily expanded to a broad variety of semiconductor materials through precursor selection.

  12. An interactive and flexible approach to stamping design and optimization

    International Nuclear Information System (INIS)

    Roy, Subir; Kunju, Ravi; Kirby, David

    2004-01-01

    This paper describes an efficient method that integrates finite element analysis (FEA), mesh morphing and response surface based optimization in order to implement an automated and flexible software tool to optimize stamping tool and process design. For FEA, a robust and extremely fast inverse solver is chosen. For morphing, a state of the art mesh morpher that interactively generates shape variables for optimization studies is used. The optimization algorithm utilized in this study enables a global search for a multitude of parameters and is highly flexible with regards to the choice of objective functions. A quality function that minimizes formability defects resulting from stretching and compression is implemented

  13. CO2 Laser Cutting of Hot Stamping Boron Steel Sheets

    Directory of Open Access Journals (Sweden)

    Pasquale Russo Spena

    2017-10-01

    Full Text Available This study investigates the quality of CO2 laser cutting of hot stamping boron steel sheets that are employed in the fabrication of automotive body-in-white. For this purpose, experimental laser cutting tests were conducted on 1.2 mm sheets at varying levels of laser power, cutting speed, and oxygen pressure. The resulting quality of cut edges was evaluated in terms of perpendicularity tolerance, surface irregularity, kerf width, heat affected zone, and dross extension. Experimental tests were based on a L9(34 orthogonal array design, with the effects of the process parameters on the quality responses being determined by means of a statistical analysis of variance (ANOVA. Quadratic mathematical models were developed to determine the relationships between the cutting parameters and the quality responses. Finally, a routine based on an optimization criterion was employed to predict the optimal setting of cutting factors and its effect on the quality responses. A confirmation experiment was conducted to verify the appropriateness of the optimization routine. The results show that all of the examined process parameters have a key role in determining the cut quality of hot stamping boron steel sheets, with cutting speed and their interactions having the most influencing effects. Particularly, interactions can have an opposite behavior for different levels of the process parameters.

  14. Core-satellite supraparticles to ballistically stamp nanostructures on surfaces.

    Science.gov (United States)

    Oppmann, Maximilian; Miller, Franziska; Thürauf, Sandra; Groppe, Philipp; Prieschl, Johannes; Stauch, Claudia; Mandel, Karl

    2018-03-27

    Nanostructured surfaces are of great importance in a very wide range of fields. They can be obtained by imprint or deposition techniques. However, these are usually sophisticated to perform. Generally, it is not easy to equip an object/product with a nanostructure post manufacturing. Yet, it would be very beneficial to achieve a modification of an arbitrary surface with a nanostructure of choice at a later stage by an approach that is simple to perform without the need of sophisticated equipment or excessive treatment by physico-chemical methods. Herein, such a process is reported which combines two "old-fashioned" techniques, namely sandblasting and rubber-stamping, and translates them to the "nano-world". By creating core-satellite supraparticles via spray-drying, a ballistic core-satellite stamp particle system is obtained which can be used to easily transfer a wide range of nanoparticles to a great variety of surfaces to equip these with a nanostructure and subsequently advanced properties. These include water-repellant, anti-fouling or anti-dust surfaces. Moreover, it is also demonstrated that the approach can be used to manufacture well-defined nano-imprinted surfaces. Such surfaces showed an improved spreading behavior for aliphatic alcohols, thus rendering such surfaces for instance very susceptible for disinfectants. All in all, the simple technique described herein has a great potential for creating nanostructured surfaces on nearly any surface.

  15. Stamping, Clapping and Chanting: An Ancient Learning Pathway?

    Directory of Open Access Journals (Sweden)

    Marion M. Long

    2006-04-01

    Full Text Available In this review I explore the effect of temporal integration as a means of improving learning in schoolchildren. I focus first on theorists that have linked physical activity with a positive effect on children’s learning and second to psychological studies that have established the existence of innate temporal patterns. These findings are related to a model of temporal integration that I have developed from Croce’s writings on aesthetics (1900. From philosophy to neurology, I discuss recent neurological findings relating to timing and conclude that an organ of temporal integration, regulation and coordination operates in the brain with respect to physical, intuitive and higher cognitive function. I link recent findings in neurophysiology to notably similar findings in recent biomusicological studies. The finding that humans have an involuntary physical response to loud, low-frequency sounds are attributed to an innate legacy of proto-music and proto-dance behaviour among hominids. I develop the model of temporal integration further by examining the literature on stamping and clapping patterns of ancient traditional dances in relation to Husserl’s writings on theoretical succession. From philosophy to pedagogy, I summarise the review by proposing stamping, clapping and chanting as a means of achieving improved temporal integration.

  16. Size Effect Studies on Tensile Tests for Hot Stamping Steel

    Science.gov (United States)

    Chen, Xiaodu; Li, Yuanyuan; Han, Xianhong; Zhang, Junbo

    2018-02-01

    Tensile tests have been widely used to determine basic mechanical properties of materials. However, the properties measured may be related to geometrical factors of the tested samples especially for high-strength steels; this makes the properties' definitions and comparisons difficult. In this study, a series of tensile tests of ultra-high-strength hot-stamped steel were performed; the geometric shapes and sizes as well as the cutting direction were modified. The results demonstrate that the hot-stamped parts were isotropic and the cutting direction had no effect; the measured strengths were practically unrelated to the specimen geometries, including both size and shape. The elongations were slightly related to sample sizes within the studied range but highly depended on the sample shape, represented by the coefficient K. Such phenomena were analyzed and discussed based on microstructural observations and fracture morphologies. Moreover, two widely used elongation conversion equations, the Oliver formula and Barba's law, were introduced to verify their applicability, and a new interpolating function was developed and compared.

  17. Two Important Stamp Motifs in Roman Britain and Thereafter

    Directory of Open Access Journals (Sweden)

    Diana C. Briscoe

    2016-03-01

    Full Text Available Stamped pottery has had a long and varied history in Britain. There have been periods when it flourished and periods when it almost totally disappeared. This article considers two variations of the rosette motif (A 5 and their fortunes from the late Iron Age to the Early Saxon period. Having been of little importance in the Iron Age and early Roman periods, they became some of the most widely used and distributed motifs in the fourth century. By the fifth century, they were still important, but formed a much smaller proportion of the total motifs than in the fourth century. In the vast majority of cases, there is no correlation between the find spots of fourth and fifth century examples. However, I have identified nine locations where one or other of the two motifs have been found on a late Roman site, which lies within a mile of another site with the same motif, but from the post-Roman period. In these rare conjunctions, I believe that ongoing usage of the motif can be demonstrated from Roman to post-Roman times. It is also clear that pot stamp evidence can be vital in identifying these highly unusual locations and pointing other researchers to sites worthy of special attention.

  18. Elsa Baxter, head of the Swiss Post Office's Stamps and Philately Unit, presents to Robert Aymar, CERN's Director-General, the Swiss commemorative stamp dedicated to CERN

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    'I am delighted to offer you a special stamp which commemorates your Laboratory's fifty-year history and pays tribute to its achievements, its pioneering spirit and its perseverance' said Mrs Baxter to Robert Aymar, CERN's Director-General.

  19. Women Putting Our Stamp on America: Biographies and Activities for National Women's History Month, March 1999.

    Science.gov (United States)

    National Women's History Project, Windsor, CA.

    This booklet, intended for use by educators and by workplace and community organizers, introduces women who have been featured on U.S. postage stamps as well as a few of the women who clearly merit such honor in the future. Postage stamps featuring women have been relatively few and far between and have only skimmed the surface of U.S. women in…

  20. 27 CFR 70.332 - Unauthorized use or sale of stamps.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unauthorized use or sale....332 Unauthorized use or sale of stamps. Any person who buys, sells, offers for sale, uses, transfers... Code or in regulations made pursuant thereto, any stamp, coupon, ticket, book, or other device...

  1. Determination of the Interfacial Heat Transfer Coefficient in the Hot Stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Ji Kang

    2016-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE simulations to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC values between a hot aluminium alloy 7075 blank and cold dies. The IHTC values were determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process, which was proved to be working well with verification tests.

  2. Determination of the interfacial heat transfer coefficient in the hot stamping of AA7075

    Directory of Open Access Journals (Sweden)

    Liu Xiaochuan

    2015-01-01

    Full Text Available The interfacial heat transfer coefficient (IHTC is a key parameter in hot stamping processes, in which a hot blank is formed and quenched by cold dies simultaneously. The IHTC should therefore be identified and used in FE models to improve the accuracy of simulation results of hot stamping processes. In this work, a hot stamping simulator was designed and assembled in a Gleeble 3800 thermo-mechanical testing system and a FE model was built in PAM-STAMP to determine the IHTC value between a hot aluminium alloy 7075 blank and cold dies. The IHTC was determined at different contact pressures under both dry and lubricated (Omega-35 conditions. In addition, a model to calculate the IHTC value at different contact pressures and area densities of lubricant was developed for the hot stamping process.

  3. Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

    Science.gov (United States)

    Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

    2016-10-01

    Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

  4. Automatic machine for the stamp charging of cakes of coal for coking. Machine automatique pour le pilonnage des pains de charbon a cokefier

    Energy Technology Data Exchange (ETDEWEB)

    Baro, R.; Crauser, L.; Mely, A.

    1988-06-29

    This machine, which consists of several basic stamp chargers that are interlinked and each of which has several stamps, has a total length that is one run less than the length of the stamp charging box, all the stamps being a constant distance apart which is at most equal to the said run so that the alternating movement of the machine along the rung ensures that the coal is stamp charged along the whole length of the stamp charging box, the stamps being, in addition, braked and stopped when necessary by an idler roller device that acts automatically in the stamp's ascending direction.

  5. Titanium nitride stamps replicating nanoporous anodic alumina films

    International Nuclear Information System (INIS)

    Navas, D; Sanchez, O; Asenjo, A; Jaafar, M; Baldonedo, J L; Vazquez, M; Hernandez-Velez, M

    2007-01-01

    Fabrication of nanostructured TiN films by magnetron sputtering using nanoporous anodic alumina films (NAAF) as substrates is reported. These hard nanostructured films could be used for pre-patterning aluminium foils and to obtain nanoporous films replicating the starting NAAF over a wide range of pore diameters and spacings. Pre-patterned Al foils are obtained by compression with pressures lower than those previously reported, then a new NAAF can be fabricated by means of only one anodization process. As an example, one of the TiN stamps was used for pre-patterning an Al foil at a pressure of 200 kg cm -2 and then it was anodized in oxalic acid solution obtaining the corresponding replica of the starting NAAF

  6. A novel time stamping technique for distributed data acquisition systems

    Science.gov (United States)

    Subramaniam, E. T.

    2012-12-01

    In this paper, we discuss the design and implementation of a synchronizing technique for data acquisition systems, which can effectively use the normal, standard local area network cables to provide a time stamp, with a range up to 32 days, resolution of 10 ns, and synchronization within ± 5 ns. This system may be used to synchronize data being collected by independent heterogeneous data acquisition modules, that acquire events independently. Such distributed systems are generally designed with a tree-like structure or independent self-triggered acquisition boxes. These leaf edges are connected through branches to the root node, via non-bus based inter-connecting links. The present system has been tested with a set of self-triggered digital signal processing based data acquisition engines, having a 100 MHz analog to digital converter front end.

  7. Analysis of roll-stamped light guide plate fabricated with laser-ablated stamper

    Science.gov (United States)

    Na, Hyunjun; Hong, Seokkwan; Kim, Jongsun; Hwang, Jeongho; Joo, Byungyun; Yoon, Kyunghwan; Kang, Jeongjin

    2017-12-01

    LGP (light guide plate) is one of the major components of LCD (liquid crystal display), and it makes surface illumination for LCD backlit. LGP is a transparent plastic plate usually produced by injection molding process. On the back of LGP there are micron size patterns for extraction of light. Recently a roll-stamping process has achieved the high mass productivity of thinner LGPs. In order to fabricate optical patterns on LGPs, a fabricating tool called as a stamper is used. Micro patterns on metallic stampers are made by several micro machining processes such as chemical etching, LIGA-reflow, and laser ablation. In this study, a roll-stamping process by using a laser ablated metallic stamper was dealt with in consideration of the compatibility with the roll-stamping process. LGP fabricating tests were performed using a roll-stamping process with four different roll pressures. Pattern shapes on the stamper fabricated by laser ablation and transcription ratios of the roll-stamping process were analyzed, and LGP luminance was evaluated. Based on the evaluation, optical simulation model for LGP was made and simulation accuracy was evaluated. Simulation results showed good agreements with optical performance of LGPs in the brightness and uniformity. It was also shown that the roll-stamped LGP has the possibility of better optical performance than the conventional injection molded LGP. It was also shown that the roll-stamped LGP with the laser ablated stamper is potential to have better optical performance than the conventional injection molded LGP.

  8. A unique patterned diamond stamp for a periodically hierarchical nanoarray structure

    Science.gov (United States)

    Wang, Yi; Shen, Yanting; Xu, Weiqing; Xu, Shuping; Li, Hongdong

    2016-10-01

    A diamond stamp with a hierarchical pattern was designed for the direct preparation of a periodic nanoarray structure, which was prepared by the reactive ion etching technique with a hierarchical ultrathin alumina membrane (HUTAM) as a mask. The optimal etching conditions for fabricating the diamond stamp were discussed in order to realize a vertical nanopore structure, avoiding structural damage from lateral etching. By using this diamond stamp, a polymer film with the desired hierarchical nanorod array structure can be obtained easily via the simple stamping process, which greatly simplifies the processing procedure. More importantly, the stamp is reusable because of its super-hardness, which ensures the reproducibility of the nanorod array pattern. Another merit is that the smooth surface of the etched diamond can avoid the use of a release agent. Our results prove that this hard stamp can be used for quick preparation of an elaborate periodic nanoarray structure. This study is significant in that it solves the problems of high cost and easy damage of stamps in nanoimprint lithography, and it might inspire more sophisticated applications of such an ordered structure in nanoplasmonics, biochemical sensing and nanophotonic devices.

  9. Resistless Fabrication of Nanoimprint Lithography (NIL Stamps Using Nano-Stencil Lithography

    Directory of Open Access Journals (Sweden)

    Juergen Brugger

    2013-10-01

    Full Text Available In order to keep up with the advances in nano-fabrication, alternative, cost-efficient lithography techniques need to be implemented. Two of the most promising are nanoimprint lithography (NIL and stencil lithography. We explore here the possibility of fabricating the stamp using stencil lithography, which has the potential for a cost reduction in some fabrication facilities. We show that the stamps reproduce the membrane aperture patterns within ±10 nm and we validate such stamps by using them to fabricate metallic nanowires down to 100 nm in size.

  10. Conical tungsten stamps for the replication of pore arrays in anodic aluminium oxide films

    Science.gov (United States)

    LeClere, D. J.; Thompson, G. E.; Derby, B.

    2009-06-01

    A tungsten master stamp has been generated by applying a novel procedure that includes two-step anodizing, followed by sequential anodizing and pore widening to develop nominally funnelled pores. These conical-shaped pores were filled with tungsten by sputter coating to manufacture a master stamp. Under a pressure of 65 MPa, the master stamp successfully embossed the surface of annealed and electropolished aluminium. The embossed surface was then used to control the position of pores created by anodizing under the conditions used to produce the original pore array.

  11. Limited indications of tax stamp discordance and counterfeiting on cigarette packs purchased in tobacco retailers, 97 counties, USA, 2012.

    Science.gov (United States)

    Lee, Joseph G L; Golden, Shelley D; Ribisl, Kurt M

    2017-12-01

    Increasing the per-unit cost of tobacco products is one of the strongest interventions for tobacco control. In jurisdictions with higher taxes in the U.S., however, cigarette pack litter studies show a substantial proportion of littered packs lack the appropriate tax stamp. More limited but still present counterfeiting also exists. We sought to examine the role of tobacco retailers as a source for untaxed and counterfeit products. Data collectors purchased Newport Green (menthol) or Marlboro Red cigarette packs in a national probability-based sample of tobacco retailers (in 97 counties) from June-October 2012. They made no effort to buy counterfeit or untaxed cigarettes. In this cross-sectional study, we assessed the presence, tax authority, and type (low-tech thermal vs. encrypted) of cigarette pack tax stamps; concordance of tax stamps with where the pack was purchased; and, for Marlboro cigarettes, publicly available visible indicators of counterfeiting. We purchased 2147 packs of which 2033 had tax stamps. Packs missing stamps were in states that do not require them. We found very limited discordance between store location and tax stamp(s) (tax stamps (13%). This occurred entirely with low-tech tax stamps and was not identified with encrypted tax stamps. We found no clear evidence of counterfeit products. Almost all tax stamps matched the location of purchase. Litter studies may be picking up legal tax avoidance instead of illegal tax evasion or, alternatively, purchase of illicit products requires special request by the purchaser.

  12. A nanoscale conical polymethyl methacrylate (PMMA) sub-wavelength structure with a high aspect ratio realized by a stamping method.

    Science.gov (United States)

    Kim, Dae-Seon; Kim, Dong-Hyun; Jang, Jae-Hyung

    2013-04-08

    A high aspect ratio conical sub-wavelength structure (SWS) was designed by using rigorous coupled-wave analysis (RCWA) method and was realized on polymethyl methacrylate (PMMA) film using a stamping technique. The silicon template containing a hexagonal array of conical holes with a period of 350 nm and an aspect ratio of 2.8 was fabricated by electron-beam (e-beam) lithography followed by a two-step etching process. The SWS with a high aspect ratio was easily transferred from the fabricated silicon template to PMMA film using the stamping method. The replicated PMMA SWS has an array of cones with nanoscale tips and an aspect ratio higher than 2.8. The average reflectance and transmittance of the PMMA film with the conical SWS in the wavelength ranging from 500 and 1500 nm was improved from 7.1 and 91.1% to 4.3 and 94.2%, respectively, as compared to flat PMMA film.

  13. Event for the launch of the Georges Charpak postage stamp | 26-27 February | Prévessin site

    CERN Multimedia

    2016-01-01

    At the end of February, the French post office is releasing a new €0.70 stamp featuring an image of Georges Charpak. CERN is taking part in this event by hosting a temporary post office on the Prévessin site, which will sell the stamp with a special “first day” postmark before it goes on general sale.     Georges Charpak arrived at CERN in 1959 and, in the late 1960s, revolutionised particle detection technology by developing the multiwire proportional chamber. This technique brought particle detectors into the electronic era, setting physicists free from the laborious task of studying photographs one by one. In 1992, he was awarded the Nobel Prize in Physics for his invention. Charpak chambers are still used today in the LHC detectors and have paved the way for the technology in numerous other modern detectors. In the 1990s, Charpak was involved in developing medical applications based on particle detection technology. He was als...

  14. Mars Express/MARSIS - Analysis and solution of an anomaly event: MARSIS Data Bad Time Stamp

    Science.gov (United States)

    Giuppi, S.; Cartacci, M.; Cicchetti, A.; Noschese, R.; Orosei, R.

    2011-10-01

    This paper describes the detection, the analysis and the possible solutions of an anomaly event occurred sometimes in MARSIS science data consisting in the corruption of the Spacecraft Event Time (SCET): MARSIS Data Bad Time Stamp.

  15. Process control for sheet-metal stamping process modeling, controller design and shop-floor implementation

    CERN Document Server

    Lim, Yongseob; Ulsoy, A Galip

    2014-01-01

    Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shopfloor deployment are presented along with ideas for further...

  16. 31 CFR 500.410 - Currency, coins, and postage and other stamps.

    Science.gov (United States)

    2010-07-01

    ... postage and other stamps issued by North Korea, North Viet-Nam, Cambodia, or South Viet-Nam are merchandise of North Korean, North Vietnamese, Cambodian, or South Vietnamese origin subject to § 500.204(a)(1). ...

  17. A burial with a stamp seal depicting a Bes-like figure from Abusir

    Czech Academy of Sciences Publication Activity Database

    Dulíková, V.; Odler, M.; Březinová, Helena; Havelková, P.

    2015-01-01

    Roč. 2015, č. 15 (2015), s. 69-75 ISSN 1214-3189 Institutional support: RVO:67985912 Keywords : Abusir * Old Kingdom * First Intermediate Period * stamp seal * amulet * Bes * reed coffin * entheses Subject RIV: AC - Archeology, Anthropology, Ethnology

  18. High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

    Science.gov (United States)

    Valls, I.; Hamasaiid, A.; Padré, A.

    2017-09-01

    In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily

  19. Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

    Science.gov (United States)

    Ma, Xuezhi; Liu, Qiushi; Xu, Da; Zhu, Yangzhi; Kim, Sanggon; Cui, Yongtao; Zhong, Lanlan; Liu, Ming

    2017-11-08

    A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g., hexagonal boron nitride) to pick up the 2D materials. Here, we develop a capillary-force-assisted clean-stamp technique that uses a thin layer of evaporative liquid (e.g., water) as an instant glue to increase the adhesion energy between 2D crystals and polydimethylsiloxane (PDMS) for the pick-up step. After the liquid evaporates, the adhesion energy decreases, and the 2D crystal can be released. The thin liquid layer is condensed to the PDMS surface from its vapor phase, which ensures the low contamination level on the 2D materials and largely remains their chemical and electrical properties. Using this method, we prepared graphene-based transistors with low charge-neutral concentration (3 × 10 10 cm -2 ) and high carrier mobility (up to 48 820 cm 2 V -1 s -1 at room temperature) and heterostructure optoelectronics with high operation speed. Finally, a capillary-force model is developed to explain the experiment.

  20. Insulation from basaltic stamp sand. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, F. D.

    1981-04-01

    A Midwest Appropriate Technology Grant was awarded to determine the technical and economic feasibility of producing mineral-fiber insulation directly from extensive deposits of basaltic sand produced during former mining and milling operations in the Keweenaw Peninsula region of Michigan's Upper Peninsula. The amounts of local basaltic sands available and representative chemical compositions were determined. The variation of viscosity with temperature and chemical composition was estimated. Samples were melted and either pulled or blown into fiber. In all cases fiber could be made with a reasonable tensile strength to ensure usefulness. It was concluded that it was technically feasible to produce fibers from basaltic stamp sands of the Upper Peninsula of Michigan. A technical feasibility study using published data, a cost and design analysis of a basalt fiber production plant, a market survey of fiber needs, and an economic analysis for investing in a basalt fiber venture was undertaken. These studies concluded that the local production of basaltic insulation was both feasible and economically reasonable. It was suggested that the plant be located in a region of greater population density with lower utility costs. A representative one-third of these studies is included as appendices A, B, C, and D.

  1. Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes

    OpenAIRE

    YAZICI, Aysel

    2014-01-01

    The effects of the hot stamping process and different hardfacing techniques, such as shielded metal arc welding (SMAW) and gas metal arc welding (GMAW), on the abrasive wear of ploughshares were investigated under field operational conditions. The abrasive wear losses were determined by measuring the weight and dimension changes before and after tillage. The wear losses of hot-stamped and hardfaced ploughshares were less significant than those of the conventionally heat-treated ploughshare sp...

  2. Springback analysis of AA5754 after hot stamping: Experiments and FE modelling

    OpenAIRE

    Wang, A; Zhong, K; El Fakir, O; Sun, C; Wang, L; Lin, J; Dean, TA

    2016-01-01

    In this paper, the springback of the aluminium alloy AA5754 under hot stamping conditions was characterised under stretch and pure bending conditions. It was found that elevated temperature stamping was beneficial for springback reduction, particularly when using hot dies. Using cold dies, the flange springback angle decreased by 9.7 % when the blank temperature was increased from 20 to 450 ?C, compared to the 44.1 % springback reduction when hot dies were used. Various other forming conditio...

  3. A Fully Automated and Robust Method to Incorporate Stamping Data in Crash, NVH and Durability Analysis

    Science.gov (United States)

    Palaniswamy, Hariharasudhan; Kanthadai, Narayan; Roy, Subir; Beauchesne, Erwan

    2011-08-01

    Crash, NVH (Noise, Vibration, Harshness), and durability analysis are commonly deployed in structural CAE analysis for mechanical design of components especially in the automotive industry. Components manufactured by stamping constitute a major portion of the automotive structure. In CAE analysis they are modeled at a nominal state with uniform thickness and no residual stresses and strains. However, in reality the stamped components have non-uniformly distributed thickness and residual stresses and strains resulting from stamping. It is essential to consider the stamping information in CAE analysis to accurately model the behavior of the sheet metal structures under different loading conditions. Especially with the current emphasis on weight reduction by replacing conventional steels with aluminum and advanced high strength steels it is imperative to avoid over design. Considering this growing need in industry, a highly automated and robust method has been integrated within Altair Hyperworks® to initialize sheet metal components in CAE models with stamping data. This paper demonstrates this new feature and the influence of stamping data for a full car frontal crash analysis.

  4. Hot Stamping of Boron Steel Using Partition Heating for Tailored Properties: Experimental Trials and Numerical Analysis

    Science.gov (United States)

    Mu, Yanhong; Wang, Baoyu; Zhou, Jing; Huang, Xu; Li, Xuetao

    2017-11-01

    Hot-stamped components with tailored properties are becoming popular for their better performance in collision. In this article, an M-shaped part with varying properties was formed by hot stamping using partition heating. Different soaking temperatures induce different austenite fractions at the different regions of the blank, resulting in the partitioned microstructure and mechanical properties in a single part. In the high-temperature region, the average tensile strength and elongation are 1565 MPa and 8.65 pct, respectively, and the average tensile strength and elongation are 626 MPa and 24.37 pct, respectively, in the low-temperature region. A finite element model of hot stamping using partition heating was established based on the relationship of austenite fraction with heating temperature determined by the dilatometer test and the stress-strain curve of 22MnB5 with different austenite fractions acquired from the hot tensile test.The differences of temperature, thickness, and Vickers hardness in different zones of the M-shaped part during forming and quenching stages were analyzed. The effects of hot stamping parameters, such as stamping velocity and heating temperature, on the forming and mechanical properties of the tailored M-shaped part were investigated, providing theoretical guidance for the production of tailored hot-stamped components using partition heating.

  5. Can an alert in primary care electronic medical records increase participation in a population-based screening programme for colorectal cancer? COLO-ALERT, a randomised clinical trial

    International Nuclear Information System (INIS)

    Guiriguet-Capdevila, Carolina; Fuentes-Peláez, Antonio; Reina-Rodríguez, Dolores; De León-Gallo, Rosa; Mendez-Boo, Leonardo; Torán-Monserrat, Pere; Muñoz-Ortiz, Laura; Rivero-Franco, Irene; Vela-Vallespín, Carme; Vilarrubí-Estrella, Mercedes; Torres-Salinas, Miquel; Grau-Cano, Jaume; Burón-Pust, Andrea; Hernández-Rodríguez, Cristina

    2014-01-01

    Colorectal cancer is an important public health problem in Spain. Over the last decade, several regions have carried out screening programmes, but population participation rates remain below recommended European goals. Reminders on electronic medical records have been identified as a low-cost and high-reach strategy to increase participation. Further knowledge is needed about their effect in a population-based screening programme. The main aim of this study is to evaluate the effectiveness of an electronic reminder to promote the participation in a population-based colorectal cancer screening programme. Secondary aims are to learn population’s reasons for refusing to take part in the screening programme and to find out the health professionals’ opinion about the official programme implementation and on the new computerised tool. This is a parallel randomised trial with a cross-sectional second stage. Participants: all the invited subjects to participate in the public colorectal cancer screening programme that includes men and women aged between 50–69, allocated to the eleven primary care centres of the study and all their health professionals. The randomisation unit will be the primary care physician. The intervention will consist of activating an electronic reminder, in the patient’s electronic medical record, in order to promote colorectal cancer screening, during a synchronous medical appointment, throughout the year that the intervention takes place. A comparison of the screening rates will then take place, using the faecal occult blood test of the patients from the control and the intervention groups. We will also take a questionnaire to know the opinions of the health professionals. The main outcome is the screening status at the end of the study. Data will be analysed with an intention-to-treat approach. We expect that the introduction of specific reminders in electronic medical records, as a tool to facilitate and encourage direct referral by

  6. Electronic data capture on athletes' pre-participation health and in-competition injury and illness at major sports championships: An extended usability study in Athletics.

    Science.gov (United States)

    Karlsson, David; Timpka, Toomas; Jacobsson, Jenny; Alonso, Juan-Manuel; Kowalski, Jan; Nilsson, Sverker; Depiesse, Frédéric; Branco, Pedro; Edouard, Pascal

    2016-08-08

    This study set out to identify factors critical for the usability of electronic data collection in association with championships in individual sports. A qualitative analysis of electronic data collection system usability for collection of data on pre-participation health from athletes and in-competition injury and illness from team physicians was performed during the 2013 European Athletics Indoor Championships. A total of 15 athletes and team physicians participated. Athletes were found to experience few problems interacting with the electronic data collection system, but reported concerns about having to reflect on injury and illness before competitions and the medical terminology used. Team physicians encountered problems when first navigating through the module for clinical reporting, but they were not subjected to motivational problems. We conclude that athletes' motivation to self-report health data and the design of the human-computer interface for team physicians are key issues for the usability of electronic data collection systems in association with championships in individual sports. © The Author(s) 2016.

  7. Tribological performances of new steel grades for hot stamping tools

    Science.gov (United States)

    Medea, F.; Venturato, G.; Ghiotti, A.; Bruschi, S.

    2017-09-01

    In the last years, the use of High Strength Steels (HSS) as structural parts in car body-in-white manufacturing has rapidly increased thanks to their favourable strength-to-weight ratio and stiffness, which allow a reduction of the fuel consumption to accommodate the new restricted regulations for CO2 emissions control. The survey of the technical and scientific literature shows a large interest in the development of different coatings for the blanks from the traditional Al-Si up to new Zn-based coatings and on the analysis of hard PVD, CVD coatings and plasma nitriding applied on the tools. By contrast, fewer investigations have been focused on the development and test of new tools steels grades capable to improve the wear resistance and the thermal properties that are required for the in-die quenching during forming. On this base, the paper deals with the analysis and comparison the tribological performances in terms of wear, friction and heat transfer of new tool steel grades for high-temperature applications, characterized by a higher thermal conductivity than the commonly used tools. Testing equipment, procedures as well as measurements analyses to evaluate the friction coefficient, the wear and heat transfer phenomena are presented. Emphasis is given on the physical simulation techniques that were specifically developed to reproduce the thermal and mechanical cycles on the metal sheets and dies as in the industrial practice. The reference industrial process is the direct hot stamping of the 22MnB5 HSS coated with the common Al-Si coating for automotive applications.

  8. Diversity of Physicians’ Handwriting and Name Stamp in Chemotherapy Prescriptions: Potential Target for Fraud

    Directory of Open Access Journals (Sweden)

    Asiyeh Amouei

    2018-02-01

    Full Text Available BBackgrounds: Verification and authentication of the paper-based handwritten prescriptions is of great importance for antineoplastic medications that are good targets for forgery and fraud. Pharmacists usually investigate handwriting, signature and name stamp of prescribers to verify prescriptions in Iran. Anecdotal reports of variations in handwriting and name stamp of physicians who wrote antineoplastic prescriptions raised concerns in this regard. The aim of the study was to investigate the reported diversity and evaluate the quality of writing physician identity and required items in antineoplastic prescriptions.Methods: All insured hand-written prescriptions contained at least one antineoplastic medication and were dispensed by four main authorized community pharmacies dispensing antineoplastic medications in Tehran during one month were included. Prescriptions that were written by specialties other than oncology-related fields were excluded. Prescriptions of each physician were evaluated considering handwriting and name stamp by experienced pharmacy staff and the frequency of detected handwriting and name stamp types was recorded.Results: Of the 11022 included prescriptions, 10944 were eligible and written by 241 physicians. Median (third quartile number of physicians’ prescriptions was 17 (51. Maximum number of observed handwriting and name stamp types were eight and six respectively. High prescribers tended to have several handwriting and name stamp types.Conclusion: The observed diversity and variation in handwriting and name stamp of the physicians in antineoplastic prescriptions may facilitate the entrance of forged prescription and makes fraud detection difficult. Administrative and regulatory interventions in addition to notification of health care professionals about the observed potential might be necessary.

  9. Artificial Neural Network (ANN) based microstructural prediction model for 22MnB5 boron steel during tailored hot stamping

    OpenAIRE

    Chokshi, Prasun; Dashwood, R. J.; Hughes, Darren J.

    2017-01-01

    Because of demand for lower emissions and better crashworthiness, the use of hot stamped 22MnB5 boron steel has greatly increased in manufacturing of automobile components. However, for many applications it is required that only certain regions in hot stamped parts are fully hardened whereas other regions need be more ductile. The innovative process of tailored hot stamping does this by controlling the localized microstructures through tailored cooling rates by dividing the tooling into heate...

  10. Stamped coal cakes in cokemaking technology Part 2 - The investigation of cake strength

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before the pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the cokemaking plant using cost efficient raw materials, but also increases oven throughput. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend and as a function of the stamping energy. In the first part of the paper, investigations on the stampability of coal blends were reported. In this paper, the development of a new strength test device for the systematic investigation of mechanical strength of coal compacts produced by stamping is described. Results from compressive strength tests indicate an elastic-plastic behaviour with failure by plastic fracture. Shear test results show similarity to the yield limit description in soil mechanics.

  11. Influence of Plastic Deformation on Martensitic Transformation During Hot Stamping of Complex Structure Auto Parts

    Science.gov (United States)

    Shen, Yuhan; Song, Yanli; Hua, Lin; Lu, Jue

    2017-04-01

    The ultra-high strength steel auto parts manufactured by hot stamping are widely applied for weight reduction and safety improvement. During the hot stamping process, hot forming and quenching are performed in one step wherein plastic deformation and phase transformation simultaneously take place and affect each other. Thereinto, the influence of deformation on martensitic transformation is of great importance. In the present paper, the influence of plastic deformation on martensitic transformation during hot stamping of complex structure auto parts was investigated. For this purpose, a B-pillar reinforced panel in B1500HS steel was manufactured by hot stamping, and the process was simulated by finite element software based on a thermo-mechanical-metallurgical coupled model. Considering various deformation degrees, the microstructures and mechanical properties at four typical locations of the hot stamped B-pillar reinforced panel were detected. The results show that the martensitic content and the microhardness increase with the increase in the deformation amount. There are two reasons causing this phenomenon: (1) the increase in mechanical driving force and (2) the increased probability of the martensitic nucleation at crystal defects. The x-ray diffraction analysis indicates the carbon enrichment in retained austenite which results from the carbon diffusion during the low-carbon martensite formation. Furthermore, the carbon content decreases with the increase in the deformation amount, because the deformation of austenite suppresses the carbon diffusion.

  12. A Theory-Based Study of Factors Explaining General Practitioners' Intention to Use and Participation in Electronic Continuing Medical Education.

    Science.gov (United States)

    Hadadgar, Arash; Changiz, Tahereh; Dehghani, Zahra; Backheden, Magnus; Mirshahzadeh, Nahidalsadat; Zary, Nabil; Masiello, Italo

    2016-01-01

    Electronic modes of continuing medical education (eCME) can provide an appropriate and scalable way of updating the knowledge and skills of general practitioners (GPs). To optimize the adoption of eCME and develop efficient and cost-effective eCME programs, factors explaining GPs' intention to use eCME must first be elucidated. Using the Theory of Planned Behavior as a framework, we developed a questionnaire and administered it to GPs in seven CME seminars in Isfahan, Iran, in 2014. Three domains of GPs' intention to use eCME were measured: attitudes, perceived behavioral control, and subjective norms. We used linear and logistic regression to identify the main predictors of intention and behavior. GPs who had high score in perceived behavioral control and a more positive attitude toward e-learning had a higher intention to adopt it for CME. In contrast, subjective norms (eg, social pressures to use eCME) were not a predictor. Attitude toward usefulness of eCME was the main predictor of being an actual eCME user. Perceived behavioral control and attitude constitute the main predictors of the intention to use eCME. Establishing discussions forums and strengthening organizational support for eCME through an increased awareness among clinical superiors and CME managers would be expected to increase GPs' intention to use eCME.

  13. Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

    Science.gov (United States)

    1988-01-01

    The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

  14. Public versus private food assistance: barriers to participation differ by age and ethnicity.

    Science.gov (United States)

    Martin, Katie S; Cook, John T; Rogers, Beatrice L; Joseph, Hugh M

    2003-01-01

    To examine participation in the Food Stamp Program, food pantries, and soup kitchens and to identify reasons food-insecure households choose not to participate. Cross-sectional retrospective cohort study. In respondents' homes. 330 randomly selected low-income households (below 185% of poverty). Participation in any of 3 public or private food assistance programs and barriers to participation in each program. Chi-square tests of association between program participation and sociodemographic characteristics. Logistic regression tested for associations between program participation and ethnicity and between food security status and household composition while controlling for potential confounding factors. Controlling for socioeconomic status, Black households are less than half as likely to receive food stamps (odds ratio [OR] = 0.49; P food pantries (P food stamps (OR = 0.44; P =.04) as nonelderly households and are more likely to say that they feel uncomfortable receiving food stamps (P =.05). Low-income households' perceptions of which programs are socially acceptable differ by race and age. Outreach for food stamps and private food assistance should accommodate these differences so that food-insecure households can benefit from all available food assistance.

  15. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  16. Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

    International Nuclear Information System (INIS)

    Shi, Dongyong; Liu, Wenquan; Ying, Liang; Hu, Ping; Shen, Guozhe

    2013-01-01

    The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part

  17. Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability

    Directory of Open Access Journals (Sweden)

    Nosova Ekaterina

    2017-01-01

    Full Text Available Constructional part producing by sheet stamping of multilayer composites requires the stamping ability data. The aim of a work is to estimate mechanical properties, stamping ratio and anisotropy indexes of 2, 4, 8 and 12 layer sandwiches produced from aluminium alloy AA3103. The pieces were received by the cold rolling. Interoperation annealing was at 500°C for 1 hour. Charts of tensile strength, yield stress, elongation depending on layer thickness were composed. It was found that cold strain hardening does not disappear after annealing if the foil’s thickness become 0.4 mm and less. Microstructure analysis has shown a good contact between layers for all samples and thicker outer layers.

  18. Modeling the constitutive and frictional behavior of PTFE flexible stamps for nanoimprint lithography

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Hattel, Jesper Henri

    2013-01-01

    In the present work, the deformation on micro-scale of PTFE flexible stamps for nanoimprint lithography is modeled. This is achieved via a combination of proper models for the constitutive behavior as well as the frictional conditions between the deforming PTFE stamp and the steel tool. The model...... was verified through an experiment, where a PTFE sheet was deformed by a steel sphere mounted in a tensile test machine. Good agreement between simulations and experimental results is found, both regarding force–displacement and corresponding principal strain measurements. As expected, applying the correct...... frictional behavior between PTFE and steel on micro-scale is shown to be of major importance in order to accurately simulate the strain field in the deformed PTFE stamp. © 2013 Elsevier B.V. All rights reserved...

  19. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    International Nuclear Information System (INIS)

    Costa, M C Ferraz da; Ribeiro, H B; Kessler, F; Souza, E A T de; Fechine, G J M

    2016-01-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS 2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way. (paper)

  20. Micromechanical exfoliation of two-dimensional materials by a polymeric stamp

    Science.gov (United States)

    Ferraz da Costa, M. C.; Ribeiro, H. B.; Kessler, F.; de Souza, E. A. T.; Fechine, G. J. M.

    2016-02-01

    In this work, an alternative technique to the traditional micromechanical exfoliation of two-dimensional materials is proposed, consisting of isolated flakes of graphite and molybdenum disulphide onto polymeric surfaces films. The set made up of polymer and flakes is fabricated by using a hot-press machine called polymeric stamp. The polymeric stamp was used to allocate flakes and also to allow the exfoliation process to take place just in one face of isolated flake. Optical microscopy, Raman spectroscopy and photoluminescence spectroscopy results showed that multilayers, bilayers and single layers of graphene and MoS2 were obtained by using a polymeric stamp as tool for micromechanical exfoliation. These crystals were more easily found because the exfoliation process concentrates them in well-defined locations. The results prove the effectiveness of the method by embedding two-dimensional materials into polymers to fabricate fewer layers crystals in a fast, economic and clean way.

  1. viStaMPS: The Application For Viewing And Manipulating StaMPS Results

    Science.gov (United States)

    Sousa, Joaquim; Sousa, Antonio; Magalhaes, Luis; Ruiz, Antonio

    2013-12-01

    viStaMPS (visual StaMPS) is a new visual application developed to enhance the visualization, manipulation and exportation of StaMPS results. The programmed application is developed in Matlab® through the Graphical User Interface (GUI) and no coding is required for running it, which avoids any programming language knowledge for standard uses. This tool integrates fully new features together with various scripts from StaMPS, allowing the generation of the desired plots/maps in a user-friendly interface. It is done by simply clicking some buttons or changing some parameters located in visual panels, instead of input commands in a prompt. Moreover, since it is written in Matlab, it gives the users the opportunity to access the data very easily and make their own modifications. Being a research tool, viStaMPS is continually under development and will count on the dynamism of its users to improve and/or add new features.

  2. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  3. Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

    Science.gov (United States)

    Schwingenschlögl, P.; Weldi, M.; Merklein, M.

    2017-09-01

    Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

  4. STAMPS: software tool for automated MRI post-processing on a supercomputer

    OpenAIRE

    Bigler, Don C.; Aksu, Yaman; Yang, Qing X.

    2009-01-01

    This paper describes a Software Tool for Automated MRI Post-processing (STAMP) of multiple types of brain MRIs on a workstation and for parallel processing on a supercomputer (STAMPS). This software tool enables the automation of nonlinear registration for a large image set and for multiple MR image types. The tool uses standard brain MRI post-processing tools (such as SPM, FSL, and HAMMER) for multiple MR image types in a pipeline fashion. It also contains novel MRI post-processing features....

  5. A compact system for large-area thermal nanoimprint lithography using smart stamps

    DEFF Research Database (Denmark)

    Pedersen, Rasmus Haugstrup; Hansen, Ole; Kristensen, Anders

    2008-01-01

    We present a simple apparatus for thermal nanoimprint lithography. In this work, the stamp is designed to significantly reduce the requirements for pressure application on the external imprint system. By MEMS-based processing, an air cavity inside the stamp is created, and the required pressure f...... is presented. Test imprints of micrometer- and nanometer-scale structures are performed and characterized with respect to uniformity across a large area (35 mm radius). State-of-the-art uniformity for mu m-scale features is demonstrated....

  6. Development and introduction of stamping technique for large-size laterals of NPP pipelines

    International Nuclear Information System (INIS)

    Romashko, N.I.; Moshnin, E.N.; Timokhin, V.S.; Bryukhanov, Yu.V.; Lebedev, V.A.

    1984-01-01

    The results of development and introduction of stamping technique for large-size laterals of NPP high-pressure pipelines are presented. The main experimental data characterizing technological possibilities of the process are given. The technological process and design of the stamp assure production of laterals from ovalized bars per one heating of the bar and per one running of the press cronnhead. Introduction of new technology decreased labour input of lateral production, reliability and serviceability of pipelines increased in this case. Introduction of this technology gives a considerable benefit

  7. Transfer printing of 3D hierarchical gold structures using a sequentially imprinted polymer stamp

    International Nuclear Information System (INIS)

    Zhang Fengxiang; Low, Hong Yee

    2008-01-01

    Complex three-dimensional (3D) hierarchical structures on polymeric materials are fabricated through a process referred to as sequential imprinting. In this work, the sequentially imprinted polystyrene film is used as a soft stamp to replicate hierarchical structures onto gold (Au) films, and the Au structures are then transferred to a substrate by transfer printing at an elevated temperature and pressure. Continuous and isolated 3D structures can be selectively fabricated with the assistance of thermo-mechanical deformation of the polymer stamp. Hierarchical Au structures are achieved without the need for a corresponding three-dimensionally patterned mold

  8. Why do low-income women not use food stamps? Findings from the California Women's Health Survey.

    Science.gov (United States)

    Kaiser, Lucia

    2008-12-01

    To determine factors associated with Food Stamp Program (FSP) participation in a potentially eligible California population. The California Women's Health Survey is an on-going annual telephone survey that collects data about health-related attitudes and behaviours from a randomly selected sample of women. Statistical procedures included chi2 and logistic regression. California, USA, from 2002 to 2004. A total of 527 FSP female participants and 1405 potentially eligible non-participant females, aged 18 years and older. The following characteristics remained independently and positively related to FSP participation: single mother with children; unemployed; on welfare; on WIC (the Special Supplemental Nutrition Program for Women, Infants, and Children); and US-born. Women under 25 years and those over 54 years were less likely to participate than women aged 25-54 years. Hispanic/Latino ethnicity was also negatively related to participation. Over 42 % of potentially eligible non-participants cited 'don't need them' as the reason for not applying for FSP, but 34.9 % either do not think they are eligible or do not know how to apply. Potentially eligible non-participants who cite 'don't need them' as a reason for not applying are less likely to be food insecure, to have inadequate income and to use alternative emergency aid, compared to women citing all other reasons. The highest level of need is among those who cite worry about citizenship or stigma as reasons for not applying. Strategies to increase participation in FSP should incorporate messages that change the public's perception of the programme, in addition to simplifying the application process, raising awareness of eligibility criteria and improving customer service.

  9. Internet-Based Training to Improve Preschool Playground Safety: Evaluation of the Stamp-in-Safety Programme

    Science.gov (United States)

    Schwebel, David C.; Pennefather, Jordan; Marquez, Brion; Marquez, Jessie

    2015-01-01

    Objective: Playground injuries result in over 200,000 US pediatric emergency department visits annually. One strategy to reduce injuries is improved adult supervision. The Stamp-in-Safety programme, which involves supervisors stamping rewards for children playing safely, has been demonstrated in preliminary classroom-based work to reduce child…

  10. Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Kailun Zheng

    2018-04-01

    Full Text Available The in-die quenching is a key stage in the hot stamping volume production chain which determines the post-formed strength of lightweight alloy components, tool life, and hot stamping productivity. In this paper, the performance of in-die quenching, reflected by the quenching efficiency (the time of work-piece held within stamping dies and die surface temperature during the simulated hot stamping process of AA6082, was experimentally and analytically investigated. A range of in-die quenching experiments were performed for different initial work-piece and die temperatures, quenching pressures, work-piece thickness, and die clearances, under hot stamping conditions. In addition, a one-dimensional (1D closed-form heat transfer model was used to calculate the die surface temperature evolution that is difficult to obtain during practical manufacture situations. The results have shown that the in-die quenching efficiency can be significantly increased by decreasing the initial work-piece and die temperatures. Die clearances are required to be designed precisely to obtain sufficiently high quenching rates and satisfying post-formed strength for hot-stamped panel components. This study systematically considered an extensive variety of influencing factors on the in-die quenching performance, which can provide practical guides for stamping tool designers and manufacture systems for hot-stamping volume production.

  11. Stamping an S on DMEK Donor Tissue to Prevent Upside-Down Grafts: Laboratory Validation and Detailed Preparation Technique Description.

    Science.gov (United States)

    Veldman, Peter B; Dye, Philip K; Holiman, Jeffrey D; Mayko, Zachary M; Sáles, Christopher S; Straiko, Michael D; Stoeger, Christopher G; Terry, Mark A

    2015-09-01

    To report endothelial cell loss (ECL) caused by a novel S-stamp preparation technique for Descemet membrane endothelial keratoplasty (DMEK). Six cadaveric human corneas were prepared for DMEK transplantation using a single standardized technique, including the application of a dry ink gentian violet S-stamp to the stromal side of Descemet membrane. Endothelial cell death was evaluated and quantified using computerized analysis of vital dye staining. ECL caused by the S-stamp was 0.6% (range 0.1%-1.0%), which comprised less than one-tenth of the total ECL caused by our preparation of the DMEK graft from the start to finish, including recovery, prestripping, S-stamping, and trephination (13.7% total ECL, range 9.9%-17.6%). Our novel S-stamp donor tissue preparation technique is intuitive to learn and holds the promise of preventing iatrogenic primary graft failure due to upside-down grafts without causing unacceptable increases in ECL.

  12. Aluminium Pneumoconiosis I. In Vitro Comparison of Stamped Aluminium Powders Containing Different Lubricating Agents and a Granular Aluminium Powder

    Science.gov (United States)

    Corrin, B.

    1963-01-01

    The discrepancy in previous reports of the action of aluminium on the lung may be explained by differences between stamped and granular aluminium powders. A stamped powder of the variety causing pulmonary fibrosis showed a brisk reaction with water, but a granular powder was unreactive. This difference is primarily due to the granular particles being covered by inert aluminium oxide, the formation of which is partially prevented in the stamping process by stearine and mineral oil. The reactivity of the flake-like stamped particles is also dependent on their large surface area per unit volume. The appearance of aluminium pneumoconiosis in Britain is explained by the introduction of mineral oil into the stamping industry for, in contrast to stearine, mineral oil permits the powder to react with water. The lung damage is believed to be caused by a soluble form of aluminium. PMID:14072616

  13. Electronic health record and genome-wide genetic data in Generation Scotland participants [version 1; referees: 2 approved, 1 approved with reservations

    Directory of Open Access Journals (Sweden)

    Shona M. Kerr

    2017-09-01

    Full Text Available This article provides the first detailed demonstration of the research value of the Electronic Health Record (EHR linked to research data in Generation Scotland Scottish Family Health Study (GS:SFHS participants, together with how to access this data. The structured, coded variables in the routine biochemistry, prescribing and morbidity records, in particular, represent highly valuable phenotypic data for a genomics research resource. Access to a wealth of other specialized datasets, including cancer, mental health and maternity inpatient information, is also possible through the same straightforward and transparent application process. The EHR linked dataset is a key component of GS:SFHS, a biobank conceived in 1999 for the purpose of studying the genetics of health areas of current and projected public health importance. Over 24,000 adults were recruited from 2006 to 2011, with broad and enduring written informed consent for biomedical research. Consent was obtained from 23,603 participants for GS:SFHS study data to be linked to their Scottish National Health Service (NHS records, using their Community Health Index number. This identifying number is used for NHS Scotland procedures (registrations, attendances, samples, prescribing and investigations and allows healthcare records for individuals to be linked across time and location. Here, we describe the NHS EHR dataset on the sub-cohort of 20,032 GS:SFHS participants with consent and mechanism for record linkage plus extensive genetic data. Together with existing study phenotypes, including family history and environmental exposures, such as smoking, the EHR is a rich resource of real world data that can be used in research to characterise the health trajectory of participants, available at low cost and a high degree of timeliness, matched to DNA, urine and serum samples and genome-wide genetic information.

  14. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    Science.gov (United States)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-03-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation.

  15. Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

    NARCIS (Netherlands)

    Karanikas, Nektarios; Schwarz, M; Harfmann, J

    2017-01-01

    A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

  16. Time-stamping system for nuclear physics experiments at RIKEN RIBF

    International Nuclear Information System (INIS)

    Baba, H.; Ichihara, T.; Ohnishi, T.; Takeuchi, S.; Yoshida, K.; Watanabe, Y.; Ota, S.; Shimoura, S.; Yoshinaga, K.

    2015-01-01

    A time-stamping system for nuclear physics experiments has been introduced at the RIKEN Radioactive Isotope Beam Factory. Individual trigger signals can be applied for separate data acquisition (DAQ) systems. After the measurements are complete, separately taken data are merged based on the time-stamp information. In a typical experiment, coincidence trigger signals are formed from multiple detectors to take desired events only. The time-stamping system allows the use of minimum bias triggers. Since coincidence conditions are given by software, a variety of physics events can be flexibly identified. The live time for a DAQ system is important when attempting to determine reaction cross-sections. However, the combined live time for separate DAQ systems is not clearly known because it depends not only on the DAQ dead time but also on the coincidence conditions. Using the proposed time-stamping system, all trigger timings can be acquired, so that the combined live time can be easily determined. The combined live time is also estimated using Monte Carlo simulations, and the results are compared with the directly measured values in order to assess the accuracy of the simulation

  17. 41 CFR 101-25.103-4 - Disposition of promotional materials, trading stamps, or bonus goods.

    Science.gov (United States)

    2010-07-01

    ..., arrange for transfer of promotional materials, trading stamps, or bonus goods, without reimbursement in...) The contract does not contain a price reduction clause, or (2) The contractor refuses to grant a price... promotional items as a price reduction, and (4) The procuring or receiving agency has no practical use for the...

  18. Impacting Mediators of Change for Physical Activity among Elderly Food Stamp Recipients

    Science.gov (United States)

    Dye, Cheryl J.; Williams, Joel E.; Kemper, Karen A.; McGuire, Francis A.; Aybar-Damali, Begum

    2012-01-01

    A multidisciplinary team developed and pilot-tested a curriculum, delivered by trained lay educators, to increase self-efficacy for physical activity among elderly food stamp recipients. Curriculum development was guided by a comprehensive literature review. Process evaluation was used to revise the curriculum and to assess lay educator training…

  19. 75 FR 4911 - Food Stamp Program: Eligibility and Certification Provisions of the Farm Security and Rural...

    Science.gov (United States)

    2010-01-29

    .... Several commenters suggested that the Department amend the current regulations to clarify that human trafficking victims and certain family members are eligible for food stamps to ensure that victims and their...). The guidance reflects the requirements under the ``Trafficking Victims Protection Act of 2000'' (Pub...

  20. Fabrication of microlens array on silicon surface using electrochemical wet stamping technique

    Science.gov (United States)

    Lai, Lei-Jie; Zhou, Hang; Zhu, Li-Min

    2016-02-01

    This paper focuses on the fabrication of microlens array (MLA) on silicon surface by taking advantage of a novel micromachining approach, the electrochemical we stamping (E-WETS). The E-WETS allows the direct imprinting of MLA on an agarose stamp into the substrate through a selective anodic dissolution process. The pre-patterned agarose stamp can direct and supply the solution preferentially on the contact area between the agarose stamp and the substrate, to which the electrochemical reaction is confined. The anodic potential vs. saturated calomel electrode is optimized and 1.5 V is chosen as the optimum value for the electrochemical polishing of p-Si. A refractive MLA on a PMMA mold is successfully transferred onto the p-Si surface. The machining deviations of the fabricated MLA from those on the mold are 0.44% in diameter and 2.1% in height respectively, and the machining rate in HF is around 1.1 μm/h. The surface roughness of the fabricated MLA is less than 12 nm owing to the electrochemical polishing process. The results demonstrate that E-WETS is a promising approach to fabricate MLA on p-Si surface with high accuracy and efficiency.

  1. Honoring Avicenna, the great Persian physician on the world's postage stamps.

    Science.gov (United States)

    Afshar, Ahmadreza

    2010-09-01

    Many nations are indebted to Avicenna (Ibn-Sina) for their scientific progressions and civilization. Many countries in the Middle East, Africa, and Europe have honored Avicenna, the great Persian scientist, by depicting his vignette on their postage stamps. The symbolic value of Avicenna has been chosen to commemorate scientific occasions, achievements and anniversaries, which represents the ultimate performance of conscious honoring.

  2. 42 CFR 71.3 - Designation of yellow fever vaccination centers; Validation stamps.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Designation of yellow fever vaccination centers... Designation of yellow fever vaccination centers; Validation stamps. (a) Designation of yellow fever vaccination centers. (1) The Director is responsible for the designation of yellow fever vaccination centers...

  3. Food Stamp and School Lunch Programs Alleviate Food Insecurity in Rural America. Fact Sheet

    Science.gov (United States)

    Smith, Kristin; Savage, Sarah

    2007-01-01

    The Food Stamp and the National School Lunch Programs play a vital role in helping poor, rural Americans obtain a more nutritious diet and alleviate food insecurity and hunger. This fact sheet looks at the extent to which rural America depends on these programs and describes characteristics of beneficiaries of these federal nutrition assistance…

  4. Studying the Solar System Can Be More than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-01-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly "could" consist mostly of showing…

  5. Stamped coal cakes in cokemaking technology Part 1 - A parameter study on stampability

    Energy Technology Data Exchange (ETDEWEB)

    Abel, F.; Rosenkranz, J.; Kuyumcu, H.Z. [Technical University of Berlin, Berlin (Germany)

    2009-07-15

    Coking of coal blends using high volatile coals with poor caking properties to produce a high quality coke for blast furnace application can be achieved by compacting the whole coal blend before pyrolysis in the so called stamp charge operation. Using stamp charging not only improves the flexibility of the coke making plant using cost efficient raw materials, but oven throughput is also increased. Therefore, in recent years, densification of coals has been introduced even to coals with good carbonisation properties when heat recovery ovens are used. At the Department for Mechanical Process Engineering and Solids Processing of the Technical University Berlin, the two subprocesses, densification and strengthening during stamping, were theoretically and experimentally investigated. The research work aims on the development of an integrated mathematical model, allowing the calculation of cake density and strength of the coal cake for a given coal blend depending on the stamping energy. The first part of this paper defines the overall process objectives and presents results from systematic investigations of the effects of several coal properties on the so called stampability as the integral model parameter for compacting. Surface moisture, coal granulometry and mechanical properties have significant influence on the densification. The incorporation of these parameters into the model allows the differentiated calculation of the cake density.

  6. Silicon oxide nanoimprint stamp fabrication by edge lithography reinforced with silicon nitride

    NARCIS (Netherlands)

    Zhao, Yiping; Berenschot, Johan W.; de Boer, Meint J.; Jansen, Henricus V.; Tas, Niels Roelof; Huskens, Jurriaan; Elwenspoek, Michael Curt

    2007-01-01

    The fabrication of silicon oxide nanoimprint stamp employing edge lithography in combination with silicon nitride deposition is presented. The fabrication process is based on conventional photolithography an weg etching methods. Nanoridges with width dimension of sub-20 nm were fabricated by edge

  7. Micropatterning of a stretchable conductive polymer using inkjet printing and agarose stamping

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Hassager, Ole; Larsen, Niels Bent

    2007-01-01

    ,4-ethylenedioxythiophene) (PEDOT). The agarose stamping produced 50 μm wide conducting lines with high spatial fidelity. The deactivation agent was found to cause some degradation of the remaining conducting lines, as revealed by a stronger increase in resistance upon straining compared to the pristine polymer material...

  8. MECHANICAL VIBRATION INHIBITS OSTEOCLAST FORMATION BY REDUCING DC-STAMP RECEPTOR EXPRESSION IN OSTEOCLAST PRECURSOR CELLS

    Science.gov (United States)

    Kulkarni, R.N.; Voglewede, P.A.; Liu, D.

    2014-01-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP), and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20 ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1 hour of mechanical vibration with 20 µm displacement at a frequency of 4 Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5 days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells were determined after 1 hour mechanical vibration, while protein production of the DC-STAMP was determined after 6 hours of post incubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduce DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. PMID:23994170

  9. Mechanical vibration inhibits osteoclast formation by reducing DC-STAMP receptor expression in osteoclast precursor cells.

    Science.gov (United States)

    Kulkarni, Rishikesh N; Voglewede, Philip A; Liu, Dawei

    2013-12-01

    It is well known that physical inactivity leads to loss of muscle mass, but it also causes bone loss. Mechanistically, osteoclastogenesis and bone resorption have recently been shown to be regulated by vibration. However, the underlying mechanism behind the inhibition of osteoclast formation is yet unknown. Therefore, we investigated whether mechanical vibration of osteoclast precursor cells affects osteoclast formation by the involvement of fusion-related molecules such as dendritic cell-specific transmembrane protein (DC-STAMP) and P2X7 receptor (P2X7R). RAW264.7 (a murine osteoclastic-like cell line) cells were treated with 20ng/ml receptor activator of NF-κB ligand (RANKL). For 3 consecutive days, the cells were subjected to 1h of mechanical vibration with 20μm displacement at a frequency of 4Hz and compared to the control cells that were treated under the same condition but without the vibration. After 5days of culture, osteoclast formation was determined. Gene expression of DC-STAMP and P2X7R by RAW264.7 cells was determined after 1h of mechanical vibration, while protein production of the DC-STAMP was determined after 6h of postincubation after vibration. As a result, mechanical vibration of RAW264.7 cells inhibited the formation of osteoclasts. Vibration down-regulated DC-STAMP gene expression by 1.6-fold in the presence of RANKL and by 1.4-fold in the absence of RANKL. Additionally, DC-STAMP protein production was also down-regulated by 1.4-fold in the presence of RANKL and by 1.2-fold in the absence of RANKL in RAW264.7 cells in response to mechanical vibration. However, vibration did not affect P2X7R gene expression. Mouse anti-DC-STAMP antibody inhibited osteoclast formation in the absence of vibration. Our results suggest that mechanical vibration of osteoclast precursor cells reduces DC-STAMP expression in osteoclast precursor cells leading to the inhibition of osteoclast formation. © 2013 Elsevier Inc. All rights reserved.

  10. Impact of an Electronic Health Record-Integrated Personal Health Record on Patient Participation in Health Care: Development and Randomized Controlled Trial of MyHealthKeeper.

    Science.gov (United States)

    Ryu, Borim; Kim, Nari; Heo, Eunyoung; Yoo, Sooyoung; Lee, Keehyuck; Hwang, Hee; Kim, Jeong-Whun; Kim, Yoojung; Lee, Joongseek; Jung, Se Young

    2017-12-07

    Personal health record (PHR)-based health care management systems can improve patient engagement and data-driven medical diagnosis in a clinical setting. The purpose of this study was (1) to demonstrate the development of an electronic health record (EHR)-tethered PHR app named MyHealthKeeper, which can retrieve data from a wearable device and deliver these data to a hospital EHR system, and (2) to study the effectiveness of a PHR data-driven clinical intervention with clinical trial results. To improve the conventional EHR-tethered PHR, we ascertained clinicians' unmet needs regarding PHR functionality and the data frequently used in the field through a cocreation workshop. We incorporated the requirements into the system design and architecture of the MyHealthKeeper PHR module. We constructed the app and validated the effectiveness of the PHR module by conducting a 4-week clinical trial. We used a commercially available activity tracker (Misfit) to collect individual physical activity data, and developed the MyHealthKeeper mobile phone app to record participants' patterns of daily food intake and activity logs. We randomly assigned 80 participants to either the PHR-based intervention group (n=51) or the control group (n=29). All of the study participants completed a paper-based survey, a laboratory test, a physical examination, and an opinion interview. During the 4-week study period, we collected health-related mobile data, and study participants visited the outpatient clinic twice and received PHR-based clinical diagnosis and recommendations. A total of 68 participants (44 in the intervention group and 24 in the control group) completed the study. The PHR intervention group showed significantly higher weight loss than the control group (mean 1.4 kg, 95% CI 0.9-1.9; Ppatients to share lifelog data. This study shows the effectiveness of a patient-managed and clinician-guided health tracker system and its potential to improve patient clinical profiles. Clinical

  11. Malawian ethnic music: concepts of hand clapping, foot stamping ...

    African Journals Online (AJOL)

    of this music. The songs used in this article are transcribed as heard and perceived from direct participation in singing them in their contexts. They are .... for understanding the concepts of pedagogy and memory aids that serve the. Yao well, for .... to some more general-non-verbal-aspects of the situation in which the words.

  12. Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

    Science.gov (United States)

    Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

    2015-01-01

    Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

  13. Polymer microlens replication by Nanoimprint Lithography using proton beam fabricated Ni stamp

    International Nuclear Information System (INIS)

    Dutta, R.K.; Kan, J.A. van; Bettiol, A.A.; Watt, F.

    2007-01-01

    It is essential to have a simplified and a rapid method for fabricating micro/nano structures in different kinds of polymeric materials. Though it is possible to fabricate arrays of microlens directly by P beam writing (PBW), it is restricted to a few types of resist materials. Therefore we have fabricated a Ni electroplated metallic stamp comprising of arrays of inverse/negative features of microlenses. The metallic stamp of about 500 μm thick is made on a silicon wafer coated with 10 μm thick polymethylglutarimide (PMGI) resist and the desired structures are written by PBW followed by thermal reflow and Ni electroplating. An array of microlenses is imprinted on a polycarbonate (PC) substrate by the Nanoimprint Lithography (NIL) technique and the replicated microlenses featuring various numerical apertures, diameters and pitches are characterized

  14. Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication

    International Nuclear Information System (INIS)

    Keum, Hohyun; Eisenhaure, Jeffrey D; Kim, Seok; Carlson, Andrew; Ning, Hailong; Mihi, Agustin; Braun, Paul V; Rogers, John A

    2012-01-01

    We present a micromanufacturing method for constructing microsystems, which we term ‘micro-masonry’ based on individual manipulation, influenced by strategies for deterministic materials assembly using advanced forms of transfer printing. Analogous to masonry in construction sites, micro-masonry consists of the preparation, manipulation, and binding of microscale units to assemble microcomponents and microsystems. In this paper, for the purpose of demonstration, we used microtipped elastomeric stamps as manipulators and built three dimensional silicon microstructures. Silicon units of varied shapes were fabricated in a suspended format on donors, retrieved, delivered, and placed on a target location on a receiver using microtipped stamps. Annealing of the assembled silicon units permanently bound them and completed the micro-masonry procedure. (paper)

  15. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    Science.gov (United States)

    Luan, Xi; Liu, Xiaochuan; Fang, Haomiao; Ji, Kang; El Fakir, Omer; Wang, LiLiang

    2016-08-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast iron had values 78.6% higher than that obtained between AA7075 and H13 die steel. Die materials and contact pressures had pronounced effects on the IHTC, suggesting that the IHTC can be used to guide the selection of stamping tool materials and the precise control of processing parameters.

  16. Combined Randomized-Local Hough Transform versus UpWrite Transform in stamp detection

    Directory of Open Access Journals (Sweden)

    Daniela Tondini

    2003-10-01

    Full Text Available The conventional Hough Transform used for detection of objects with known shape and size has proved its robustness. One typical task for this transform can be the detection of stamp(s on an envelope. Unfortunately, the Hough Transform has an important drawback: the heavy computational effort and, as consequence, a big execution time. This paper introduces a variant of Hough Transform that speeds up the process. One important aid is given by a filtering step based on a fast analysis of a rough deformation model. This method is a combination of Randomized and Local Hough Transform. Experiments were made comparing the modified Hough Transform approach with the UpWrite Transform and they proved that the first approach preserves the quality of the Hough Transform results at a higher speed.

  17. Influence of operating parameters on coke end temperature in stamp charged batteries

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, U.S.; Sarkar, P.; Deshpande, D.P. [Tata Steel, Jamshedpur (India)

    2004-07-01

    Coke end temperature (CET) indicates the final temperature of coke mass after pushing it out from the oven and before quenching and thus is an indicator of the preparedness of the coke. Analysis of plant data from stamp charged batteries at Tata Steel show that it depends on coal blend characteristics and battery conditions. Increased input coal ash, its crushing fineness and volatile matters increases but the moisture decreases it. The heating rate, battery and regenerator temperatures all increase the coke end temperature. The present paper documents that observations on parameters influencing coke end temperature under stamp charged conditions and attempts to hypothesise the possible explanation for the results obtained. 3 refs., 10 figs., 2 tabs.

  18. Modeling and Simulating Material Behavior during Hot Blank - Cold Die (HB-CD) Stamping of Aluminium Alloy Sheets

    Science.gov (United States)

    Zhang, Nan; Abu-Farha, Fadi

    2016-08-01

    Hot blank - cold die (HB-CD) stamping, non-isothermal hot stamping, of aluminium alloy sheets offers great opportunities for high production rates at low cost, while overcoming limited material formability issues. Yet developing an accurate model that can describe the complex material behavior over the wide ranging conditions of HB-CD stamping (temperatures ranging between 25 and 350 °C) is challenging. Moreover, validation of the developed models under transient conditions is problematic. This work presents he results of a comprehensive characterization, material modeling, FE simulation and experimental validation effort to capture the behavior of an aluminium alloy sheet during HB-CD stamping. In particular, we highlight the integration between temperature measurements (thermography) and strain measurements (digital image correlation) for the accurate validation of model predictions of non-isothermal material deformation.

  19. 75 FR 11913 - Chrysler, LLC; Warren Stamping Plant, Including On-Site Leased Workers From Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... firm. The workers produce stamping parts for automobiles. New information shows that workers leased... under the control of the subject firm to be considered leased workers. Based on these findings, the...

  20. A rapid co-culture stamping device for studying intercellular communication

    OpenAIRE

    Amin Hassanzadeh-Barforoushi; Jonathan Shemesh; Nona Farbehi; Mohsen Asadnia; Guan Heng Yeoh; Richard P. Harvey; Robert E. Nordon; Majid Ebrahimi Warkiani

    2016-01-01

    Regulation of tissue development and repair depends on communication between neighbouring cells. Recent advances in cell micro-contact printing and microfluidics have facilitated the in-vitro study of homotypic and heterotypic cell-cell interaction. Nonetheless, these techniques are still complicated to perform and as a result, are seldom used by biologists. We report here development of a temporarily sealed microfluidic stamping device which utilizes a novel valve design for patterning two a...

  1. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method.

    Science.gov (United States)

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2013-03-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  2. Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses

    OpenAIRE

    Daehn, G. S.; Shang, J.; Vohnout, V. J.

    2004-01-01

    Stamping failures consist of, broadly speaking, either tearing (excessive local strain energy) or wrinkling (insufficient or inappropriate local strain energy). Good parts are produced when the strain energy or plastic work is effectively distributed during the forming process such that tears and wrinkles are eliminated. The process window framed by tearing and wrinkling limits can be rather small for some materials, notably aluminum alloys. At present, there are no established methods of dir...

  3. A new marking technique for peripheral lung nodules avoiding pleural puncture: the intrathoracic stamping method

    OpenAIRE

    Kawada, Masaya; Okubo, Tetsuyuki; Poudel, Saseem; Suzuki, Yoshinori; Kawarada, Yo; Kitashiro, Shuji; Okushiba, Shunichi; Katoh, Hiroyuki

    2012-01-01

    While performing thoracoscopic wedge resection of the lung, the location of the lesion is generally identified by visual inspection or palpation. When difficulty in identification of the lesion by thoracoscopy is anticipated, preoperative marking is performed. However, complications and technical difficulties plague current marking techniques. To overcome this problem, we designed a new, safe and easy marking technique that avoids pleural puncture, called the intrathoracic stamping method.

  4. Characterization of the interfacial heat transfer coefficient for hot stamping processes

    OpenAIRE

    Luan, X; Liu, X; Fang, H; Ji, K; El Fakir, O; Wang, L

    2016-01-01

    In hot stamping processes, the interfacial heat transfer coefficient (IHTC) between the forming tools and hot blank is an essential parameter which determines the quenching rate of the process and hence the resulting material microstructure. The present work focuses on the characterization of the IHTC between an aluminium alloy 7075-T6 blank and two different die materials, cast iron (G3500) and H13 die steel, at various contact pressures. It was found that the IHTC between AA7075 and cast ir...

  5. Anisotropic behaviour law for sheets used in stamping: A comparative study of steel and aluminium

    OpenAIRE

    Sinou, Jean-Jacques; Macquaire, Bruno

    2008-01-01

    International audience; For a car manufacturer, reducing the weight of vehicles is an obvious aim. Replacing steel by aluminium moves towards that goal. Unfortunately, aluminium's stamping numerical simulation results are not yet as reliable as those of steel. Punch-strength and spring-back phenomena are not correctly described. This study on aluminium validates the behaviour law Hill 48 quadratic yield criterion with both isotropic and kinematic hardening. It is based on the yield surface an...

  6. Low temperature high density plasma nitriding of stainless steel molds for stamping of oxide glasses

    Directory of Open Access Journals (Sweden)

    Aizawa Tatsuhiko

    2016-01-01

    Full Text Available Various kinds of stainless steels have been widely utilized as a die for mold- and direct-stamping processes of optical oxide glasses. Since they suffered from high temperature transients and thermal cycles in practice, they must be surface-treated by dry and wet coatings, or, by plasma nitriding. Martensitic stainless steel mold was first wet plated by the nickel phosphate (NiP, which was unstable at the high temperature stamping condition; and, was easy to crystalize or to fracture by itself. This issue of nuisance significantly lowered the productivity in fabrication of optical oxide-glass elements. In the present paper, the stainless steel mold was surface-treated by the low-temperature plasma nitriding. The nitrided layer by this surface modification had higher nitrogen solute content than 4 mass%; the maximum solid-solubility of nitrogen is usually 0.1 mass% in the equilibrium phase diagram. Owing to this solid-solution with high nitrogen concentration, the nitrided layer had high hardness over 1400 HV within its thickness of 50 μm without any formation of nitrides after plasma nitriding at 693 K for 14.4 ks. This plasma-nitrided mold was utilized for mold-stamping of two colored oxide glass plates at 833 K; these plates were successfully deformed and joined into a single glass plate by this stamping without adhesion or galling of oxide glasses onto the nitrided mold surface.

  7. Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

    Science.gov (United States)

    Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

    2017-09-01

    The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

  8. Cracking and interfacial debonding of the Al–Si coating in hot stamping of pre-coated boron steel

    Energy Technology Data Exchange (ETDEWEB)

    Gui, Zhong-Xiang; Wang, Kai; Zhang, Yi-Sheng [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhu, Bin, E-mail: zhubin26@gmail.com [College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2014-10-15

    Highlights: • Cracking failure of the Al–Si coating in hot stamping process was investigated. • Microcracks initiated inside the coating during the austenitization. • Microcrack initiation in the hot deformation correlated to the Fe–Al intermetallics. • Macrocracks extended along the Mode I path led to the coating break into segments. • Macrocracks growth followed Mode II path resulted in the interfacial debonding. - Abstract: This study is focused on the mechanisms of cracks initiation, propagation and interfacial debonding of the Al–Si coating in hot stamping of the pre-coated boron steel. The investigation was performed isothermally at three deformation temperatures (700, 750, 800 °C) at a strain rate of 0.1/s. Cracking and interfacial debonding of the coating were observed with optical and scanning electron microscope, to reveal the damage evolution under applied tensile strains. Microstructures and phase inside the coating before and after austenitization were determined by energy dispersive spectroscopy and X-ray diffraction. The results indicate that austenitization led to micro-cracks and Kirkendall voids initiation inside the Al–Si coating because of thermal loading, and the cracks were arrested by α-Fe diffusion layer. When the coating on substrate system was submitted to the uniaxial tensile test, the surface coating exhibited multiple cracking normal to the tensile direction. The Kirkendall voids seemed to promote the macro-crack growth through the diffusion layer. The macro-cracks followed a Mode I path, leading to the coating deteriorates to cracked segments. The macro-cracks then continued to propagate following a Mode II path that along the diffusion layer/substrate interface because of shear stress transferred from the deformed substrate, resulting in the interfacial debonding of the coating segments. The crack density firstly increased with the increasing tensile strain and then reached saturation. Decreasing deformation

  9. Estimating Bus Loads and OD Flows Using Location-Stamped Farebox and Wi-Fi Signal Data

    Directory of Open Access Journals (Sweden)

    Yuxiong Ji

    2017-01-01

    Full Text Available Electronic fareboxes integrated with Automatic Vehicle Location (AVL systems can provide location-stamped records to infer passenger boarding at individual stops. However, bus loads and Origin-Destination (OD flows, which are useful for route planning, design, and real-time controls, cannot be derived directly from farebox data. Recently, Wi-Fi sensors have been used to collect passenger OD flow information. But the data are insufficient to capture the variation of passenger demand across bus trips. In this study, we propose a hierarchical Bayesian model to estimate trip-level OD flow matrices and a period-level OD flow matrix using sampled OD flow data collected by Wi-Fi sensors and boarding data provided by fareboxes. Bus loads on each bus trip are derived directly from the estimated trip-level OD flow matrices. The proposed method is evaluated empirically on an operational bus route and the results demonstrate that it provides good and detailed transit route-level passenger demand information by combining farebox and Wi-Fi signal data.

  10. Validation of the stamping method for CaSO{sub 4}:RE + Teflon® pellets production

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br, E-mail: lcrodri@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    The IPEN method for the CaSO{sub 4}:RE + Teflon® production, developed and patented at the Dosimetric Materials Laboratory - LMD/IPEN in the earlier 1980's, is highly time-demanding, so that the use of the stamping method, already widely industrially applied, would enhance the CaSO{sub 4}:RE + Teflon® pellets production. Thus, validating the stamping method, by comparing the dosimetric properties of a batch of pellets produced by each method, became a must. The stamped batch presents the same mean non-irradiated signals either after sintering or annealing while IPEN batch mean non-irradiated signals vary in 23%. The mean TL signal after irradiation was about 50 nC, but the standard deviation varies from 20% to 33% for IPEN batch and keeps in 10% for the stamped batch. 24 h after the irradiation, the TL signal decreased to about 35 nC, with no differences in IPEN batch standard deviation and a decrease to 5% in stamped batch standard deviation, for the five performed essays. Calibration curves present a linear behavior over the entire studied dose range and the same coefficients for both methods, however, the uncertainties in the coefficients determined to the calibration curve obtained with stamped pellets are significantly smaller, leading to a more precise dose determination. This results show that the stamping method produces more homogeneous batches, with pellets that maintain the dosimetric characteristics of the detectors produced by IPEN method, in such a way that the stamping method can substitute with advantages the IPEN method in the CaSO{sub 4}:RE + Teflon® dosimetric pellets production. (author)

  11. Application of a Model for Quenching and Partitioning in Hot Stamping of High-Strength Steel

    Science.gov (United States)

    Zhu, Bin; Liu, Zhuang; Wang, Yanan; Rolfe, Bernard; Wang, Liang; Zhang, Yisheng

    2018-04-01

    Application of quenching and partitioning process in hot stamping has proven to be an effective method to improve the plasticity of advanced high-strength steels (AHSSs). In this study, the hot stamping and partitioning process of advanced high-strength steel 30CrMnSi2Nb is investigated with a hot stamping mold. Given the specific partitioning time and temperature, the influence of quenching temperature on the volume fraction of microstructure evolution and mechanical properties of the above steel are studied in detail. In addition, a model for quenching and partitioning process is applied to predict the carbon diffusion and interface migration during partitioning, which determines the retained austenite volume fraction and final properties of the part. The predicted trends of the retained austenite volume fraction agree with the experimental results. In both cases, the volume fraction of retained austenite increases first and then decreases with the increasing quenching temperature. The optimal quenching temperature is approximately 290 °C for 30CrMnSi2Nb with the partition conditions of 425 °C and 20 seconds. It is suggested that the model can be used to help determine the process parameters to obtain retained austenite as much as possible.

  12. Fabrication of 3D high aspect ratio PDMS microfluidic networks with a hybrid stamp.

    Science.gov (United States)

    Kung, Yu-Chun; Huang, Kuo-Wei; Fan, Yu-Jui; Chiou, Pei-Yu

    2015-04-21

    We report a novel methodology for fabricating large-area, multilayer, thin-film, high aspect ratio, 3D microfluidic structures with through-layer vias and open channels that can be bonded between hard substrates. It is realized by utilizing a hybrid stamp with a thin plastic sheet embedded underneath a PDMS surface. This hybrid stamp solves an important edge protrusion issue during PDMS molding while maintaining necessary stamp elasticity to ensure the removal of PDMS residues at through-layer regions. Removing edge protrusion is a significant progress toward fabricating 3D structures since high aspect ratio PDMS structures with flat interfaces can be realized to facilitate multilayer stacking and bonding to hard substrates. Our method also allows for the fabrication of 3D deformable channels, which can lead to profound applications in electrokinetics, optofluidics, inertial microfluidics, and other fields where the shape of the channel cross section plays a key role in device physics. To demonstrate, as an example, we have fabricated a microfluidic channel by sandwiching two 20 μm wide, 80 μm tall PDMS membranes between two featureless ITO glass substrates. By applying electrical bias to the two ITO substrates and pressure to deform the thin membrane sidewalls, strong electric field enhancement can be generated in the center of a channel to enable 3D sheathless dielectrophoretic focusing of biological objects including mammalian cells and bacteria at a flow speed up to 14 cm s(-1).

  13. Prevention of crack in stretch flanging process using hot stamping technique

    Science.gov (United States)

    Syafiq, Y. Mohd; Hamedon, Z.; Azila Aziz, Wan; Razlan Yusoff, Ahmad

    2017-10-01

    Demand for enhancing of passenger safety as well as weight reduction of automobiles has increased the use of high strength steel sheets. As a sheet metal is a lightweight having high strength is suitable for producing automotive parts such as white body panel. The stretch flanging of the high strength steel sheet is a problem due to high springback and easy to crack. This study uses three methods to stretch flange the sheets; using lubricants, shear-edge polishing and hot stamping. The effectiveness of these methods will be measured by comparing the flange length of each methods can achieved. For stretch flange with lubricant and polished sheared edge, the flange length failed to achieve the target 15 mm while hot stamping improved the formability of the sheet and preventing the occurrence of the springback and crack. Hot stamping not only improved formability of the sheet but also transformed the microstructure into martensite thus improve the hardness and the strength of the sheet after been quenched with the dies.

  14. Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

    Directory of Open Access Journals (Sweden)

    M. Kumar

    2017-01-01

    Full Text Available AW-7xxx alloys have been nowadays considered for greater light weighting potential in automotive industry due to its higher strength compared to AW-5xxx and AW-6xxx alloys. However, due to their lower formability the forming processes are still in development. This paper investigates one such forming process called hot stamping. The investigation started by carrying out hot tensile testing of an AW-7xxx alloy, that is, AW-7921 at temperatures between 350°C and 475°C, to measure the strength and formability. Formability was found to improve with increasing temperature and was sensitive to the strain rate. Dynamic recovery is considered as usual reason for the formability improvement. However, examining the precipitation states of the as-received condition and after hot stamping using differential scanning calorimetry (DSC, the dissolution of precipitates was also believed to contribute to this increase in formability. Following solution heat treatment there was no precipitation during cooling across the cooling rates investigated (5–10°C/s. Samples taken from parts hot stamped at 10 and 20 mm s−1 had similar yield strengths. A 3-step paint baking heat treatment yielded a higher postpaint baking strength than a single step treatment.

  15. Conformal contact and pattern stability of stamps used for soft lithography

    Science.gov (United States)

    Bietsch, Alexander; Michel, Bruno

    2000-10-01

    Patterning in soft lithography techniques such as microcontact printing or light-coupling mask lithography is mediated by surface topographical patterns of elastomeric stamps: intimate contact with the substrate is achieved locally at the protruding areas, whereas a gap remains between the substrate and recessed zones. This principle challenges the properties of the stamp, especially when printing high-resolution or extreme aspect-ratio patterns with high accuracy. On the one hand, the stamp must be soft enough to enable conformal contact with the substrate, which means that it must adapt elastically without leaving voids created by the natural roughness of the substrate. On the other hand, a precise definition of micropatterns requires a rigid material. In this article, we analyze the conditions of elasticity, roughness, and energy of adhesion to establish conformal contact between an elastomer and the target surface. Furthermore, we address questions of replication accuracy and evaluate local elastic deformation induced by normal forces using model calculations for simple pattern geometries. Pressure applied during contact leads to a sagging or collapse of the unsupported areas. We discuss implications on both material and pattern design that allow spontaneous propagation of conformal contact while inhibiting the spreading of collapse.

  16. On the die face design for stamping an automotive engine hood

    Science.gov (United States)

    Chen, Ming-Zhi; Wang, Shi-Wei; Lin, Ching-I.; Chen, Fuh-Kuo

    2017-09-01

    Since the engine hood is mainly manufactured in the drawing operation, the die addendum design is the key to the success of manufacturing a defect free product. In this study, the existing die addendum designs corresponding to those engine hoods were reviewed and the design parameters were constructed. The preliminary study was then performed to examine the influences of the stamping die angle, binder surface shape, and die open line shape on the defects occurred in the part. Based on the simulation results, the optimum design for the die addendum face was then investigated and a systematic design guideline was proposed. In order to validate the proposed design guideline, actual engine hoods were stamped according to the finite element analysis and the production part shapes, thickness distributions, and the stretch at the central region were compared with those obtained from the finite element simulations. The consistent agreement between the product parts and the simulation results confirms the validity of the design guideline proposed in the present study for stamping an engine hood.

  17. Evaluation of resistless Ga+ beam lithography for UV NIL stamp fabrication

    Science.gov (United States)

    Rumler, M.; Fader, R.; Haas, A.; Rommel, M.; Bauer, A. J.; Frey, L.

    2013-09-01

    This paper presents an alternative rapid prototyping approach for the fabrication of stamps for UV nanoimprint lithography. In this process, areas implanted with gallium serve as an etch mask for the dry etching of quartz. The implantation is performed using a focused ion beam system. To avoid charging of the quartz substrate the use of thin layers of chromium or carbon on the quartz substrate has been evaluated. The resulting quartz structures exhibit very smooth surfaces after dry etching, if the implantation dose is high enough to form a stable etch mask. Furthermore, anisotropic etching could be realized by optimization of a quartz etching process involving C4F8 and O2 after the use of resistless Ga+ beam lithography. Finally, imprints into a UV curing resist are performed successfully with the manufactured stamps, proving that the presence of Ga rich areas on the stamp is not detrimental to the curing of the resist or the functionality of the anti-sticking layer.

  18. Rubber stamp templates for improving clinical documentation: A paper-based, m-Health approach for quality improvement in low-resource settings.

    Science.gov (United States)

    Kleczka, Bernadette; Musiega, Anita; Rabut, Grace; Wekesa, Phoebe; Mwaniki, Paul; Marx, Michael; Kumar, Pratap

    2018-06-01

    The United Nations' Sustainable Development Goal #3.8 targets 'access to quality essential healthcare services'. Clinical practice guidelines are an important tool for ensuring quality of clinical care, but many challenges prevent their use in low-resource settings. Monitoring the use of guidelines relies on cumbersome clinical audits of paper records, and electronic systems face financial and other limitations. Here we describe a unique approach to generating digital data from paper using guideline-based templates, rubber stamps and mobile phones. The Guidelines Adherence in Slums Project targeted ten private sector primary healthcare clinics serving informal settlements in Nairobi, Kenya. Each clinic was provided with rubber stamp templates to support documentation and management of commonly encountered outpatient conditions. Participatory design methods were used to customize templates to the workflows and infrastructure of each clinic. Rubber stamps were used to print templates into paper charts, providing clinicians with checklists for use during consultations. Templates used bubble format data entry, which could be digitized from images taken on mobile phones. Besides rubber stamp templates, the intervention included booklets of guideline compilations, one Android phone for digitizing images of templates, and one data feedback/continuing medical education session per clinic each month. In this paper we focus on the effect of the intervention on documentation of three non-communicable diseases in one clinic. Seventy charts of patients enrolled in the chronic disease program (hypertension/diabetes, n=867; chronic respiratory diseases, n=223) at one of the ten intervention clinics were sampled. Documentation of each individual patient encounter in the pre-intervention (January-March 2016) and post-intervention period (May-July) was scored for information in four dimensions - general data, patient assessment, testing, and management. Control criteria included

  19. Molecular dynamics study on the effects of stamp shape, adhesive energy, and temperature on the nanoimprint lithography process

    International Nuclear Information System (INIS)

    Kang, Ji-Hoon; Kim, Kwang-Seop; Kim, Kyung-Woong

    2010-01-01

    Molecular dynamics simulations of nanoimprint lithography (NIL) were performed to investigate the effects of three critical process parameters in NIL: stamp shape, adhesive energy between the stamp and polymer film, and imprint temperature. The proposed simulation model of the NIL process consists of an amorphous SiO 2 stamp with a line pattern, an amorphous poly(methylmethacrylate) film, and a Si substrate under the periodic boundary condition in the horizontal direction to simulate a real NIL process imprinting periodical line patterns. The behavior of polymer deformation and the effects of adhesion on pattern transfer were investigated by observing the deformation process, calculating the imprint and separation forces, and analyzing the density and stress distribution inside the polymer film. In addition, their dependency on the process parameters is also discussed with reference to the changes in pattern shape, adhesive energy between the stamp and polymer atoms, and imprint temperature of the polymer film. During the imprint process, the rectangular pattern shows inferior cavity filling and higher stress concentration compared to trapezoidal and triangular patterns because it requires much larger flow and deformation of the polymer film. Low imprint temperature also produces high stress concentration and large imprint force due to the lower fluidity of polymer film. In the separation process, the rectangular pattern generates the largest separation force and causes the most serious defects of the transferred pattern and even the polymer film, while the triangular pattern shows the most satisfactory pattern transfer. In addition, the adhesive energy between the stamp and the polymer film also strongly influences the adhesion between the stamp and the polymer film. Low adhesive energy reduces the separation force of the stamp and transferred pattern defects, and therefore enhances the quality of pattern transfer.

  20. Electronics all-in-one for dummies

    CERN Document Server

    Ross, Dickon

    2013-01-01

    Your one-stop UK shop for clear, concise explanations to all the important concepts in electronics and tons of direction for building simple, fun electronic projects. The 8 mini-books in this 1 volume include: Getting Started with ElectronicsWorking with Basic ComponentsWorking with Integrated CircuitsGetting into Alternating CurrentWorking with Radio and InfraredDoing Digital ElectronicsWorking with Basic Stamp ProcessorsBuilding Special Effects With nearly 900 pages of instruction, Electronics All-in-One For Dummies covers all the bases and provides a fascinating hands-on exploration of el

  1. SINCERITIES: Inferring gene regulatory networks from time-stamped single cell transcriptional expression profiles.

    Science.gov (United States)

    Papili Gao, Nan; Ud-Dean, S M Minhaz; Gandrillon, Olivier; Gunawan, Rudiyanto

    2017-09-14

    Single cell transcriptional profiling opens up a new avenue in studying the functional role of cell-to-cell variability in physiological processes. The analysis of single cell expression profiles creates new challenges due to the distributive nature of the data and the stochastic dynamics of gene transcription process. The reconstruction of gene regulatory networks (GRNs) using single cell transcriptional profiles is particularly challenging, especially when directed gene-gene relationships are desired. We developed SINCERITIES (SINgle CEll Regularized Inference using TIme-stamped Expression profileS) for the inference of GRNs from single cell transcriptional profiles. We focused on time-stamped cross-sectional expression data, commonly generated from transcriptional profiling of single cells collected at multiple time points after cell stimulation. SINCERITIES recovers directed regulatory relationships among genes by employing regularized linear regression (ridge regression), using temporal changes in the distributions of gene expressions. Meanwhile, the modes of the gene regulations (activation and repression) come from partial correlation analyses between pairs of genes. We demonstrated the efficacy of SINCERITIES in inferring GRNs using in silico time-stamped single cell expression data and single cell transcriptional profiles of THP-1 monocytic human leukemia cells. The case studies showed that SINCERITIES could provide accurate GRN predictions, significantly better than other GRN inference algorithms such as TSNI, GENIE3 and JUMP3. Moreover, SINCERITIES has a low computational complexity and is amenable to problems of extremely large dimensionality. Finally, an application of SINCERITIES to single cell expression data of T2EC chicken erythrocytes pointed to BATF as a candidate novel regulator of erythroid development. The MATLAB and R version of SINCERITIES is freely available from the following websites: http://www.cabsel.ethz.ch/tools/sincerities.html and

  2. Studying the Solar System Can Be More Than Just "Stamp Collecting"

    Science.gov (United States)

    LoPresto, Michael C.

    2017-04-01

    While teaching his first-ever introductory college astronomy course, I heard a graduate student make the comment that compared to other areas of astronomy, studying the solar system is just "stamp collecting." Coverage of the solar system in an introductory college astronomy course certainly could consist mostly of showing images and reporting facts, but by using observations that can be made from images and also data and other known facts about the objects, instruction on solar system topics can be more conceptual, involving just as much inquiry and discovery as any area of astronomy or physics.

  3. Analysis of the Phenomenon of Speculative Trading in One of its Basic Manifestations:. Postage Stamp Bubbles

    Science.gov (United States)

    Roehner, B.; Sornette, D.

    We document and analyze the empirical facts concerning one of the clearest evidence of speculation in financial trading as observed in the postage collection stamp market. We unravel some of the mechanisms of speculative behavior which emphasize the role of fancy and collective behavior. In our conclusion, we propose a classification of speculative markets based on two parameters, namely the amplitude of the price peak and a second parameter that measures its "sharpness". This study is offered to anchor modeling efforts to realistic market constraints and observations.

  4. Time stamp generation with inverse FIR filters for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Namias, Mauro

    2009-01-01

    Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

  5. Use of atomic force microscopy in the forensic application of chronological order of toners and stamping inks in questioned documents.

    Science.gov (United States)

    Kang, Tae-Yi; Lee, Joong; Park, Byung-Wook

    2016-04-01

    This paper describes the application of the atomic force microscopy (AFM) as a nano-indentation method and introduces a new method of identifying the chronological order of the application of the toner and stamping ink on the surface of documents by removing either of them. Various toners were used as samples for the AFM nano-indentation method. The chronological order of the application of the toner and stamping ink with either the toner placed over the stamping ink or the stamping ink placed over the toner, could be identified, regardless of the kinds of toners made by various companies. This paper provides the new approach for physically removing the toner and checking the material below it to identify questioned documents, which allows the method to be used to appraise documents forensically. Blind testing has shown that the method to analyze the chronological order of toner-printed documents and the seal stamping on them could accurately identify the order in all samples, while minimizing damage to the samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  6. Fabrication of a roller type PDMS stamp using SU-8 concave molds and its application for roll contact printing

    International Nuclear Information System (INIS)

    Park, Jongho; Kim, Beomjoon

    2016-01-01

    Continuous fabrication of micropatterns at low-cost is attracting attention in various applications within industrial fields. To meet such demands, we have demonstrated a roll contact printing technique, using roller type polydimethylsiloxane (PDMS) stamps with roll-to-flat and roll-to-roll stages. Roller type PDMS stamps for roll contact printing were fabricated using a custom-made metal support and SU-8 microstructures fabricated on concave substrates as a mold. The molding/casting method which we developed here provided faster and easier fabrication than conventional methods for roller type stamps. Next, roll contact printing was performed using fabricated roller type PDMS stamps with roll-to-flat and roll-to-roll stages. Patterns with minimum widths of 3 μm and 2.1 μm were continuously fabricated for each stage, respectively. In addition, the relationship between applied pressures and dimensional changes of roll contact printed patterns was investigated. Finally, we confirmed that roll contact printing and the new fabrication method for roller stamps presented in this study demonstrated the feasibility for industrial applications. (paper)

  7. Grading Classroom Participation.

    Science.gov (United States)

    Bean, John C.; Peterson, Dean

    1998-01-01

    Grading class participation can send positive signals to college students about the kind of learning and thinking an instructor values. Various structures for participation (whole-class discussion, cold-calling on students, collaborative learning, electronic mail, journals, student-faculty conferences) call for different approaches to assessment.…

  8. Organizational learning in the implementation and adoption of national electronic health records: case studies of two hospitals participating in the National Programme for Information Technology in England.

    Science.gov (United States)

    Takian, Amirhossein; Sheikh, Aziz; Barber, Nicholas

    2014-09-01

    To explore the role of organizational learning in enabling implementation and supporting adoption of electronic health record systems into two English hospitals. In the course of conducting our prospective and sociotechnical evaluation of the implementation and adoption of electronic health record into 12 "early adopter" hospitals across England, we identified two hospitals implementing virtually identical versions of the same "off-the-shelf" software (Millennium) within a comparable timeframe. We undertook a longitudinal qualitative case study-based analysis of these two hospitals (referred to hereafter as Alpha and Omega) and their implementation experiences. Data included the following: 63 in-depth interviews with various groups of internal and external stakeholders; 41-h on-site observation; and content analysis of 218 documents of various types. Analysis was both inductive and deductive, the latter being informed by the "sociotechnical changing" theoretical perspective. Although Alpha and Omega shared a number of contextual similarities, our evaluation revealed fundamental differences in visions of electronic health record and the implementation strategy between the hospitals, which resulted in distinct local consequences of electronic health record implementation and impacted adoption. Both hospitals did not, during our evaluation, see the hoped-for benefits to the organization as a result of the introduction of electronic health record, such as speeding-up tasks. Nonetheless, the Millennium software worked out to be easier to use at Omega. Interorganizational learning was at the heart of this difference. Despite the turbulent overall national "roll out" of electronic health record systems into the English hospitals, considerable opportunities for organizational learning were offered by sequential delivery of the electronic health record software into "early adopter" hospitals. We argue that understanding the process of organizational learning and its

  9. The collection of Tuvan stamps (1926–1943 in the National Museum of the Republic of Tuva and the prospects of philately in Tuva

    Directory of Open Access Journals (Sweden)

    Kaadyr-ool A. Bicheldey

    2016-09-01

    Full Text Available Stamps of the People’s Republic of Tuva (PRT, 1921-1944 as indicia and as items of collectors’ interest, are universally renowned, and as such have been the subject of a good deal of research. These works contain more than a mere story of Tuvan stamps – they provide a lot of useful information on Tuva, its history, including the history of postal service in the region. This article describes the collection of indicia (more than 500 pieces dated 1926-1943 and preserved at Aldan Maadyr National Museum of Tuva. On the basis of this analysis we have formulated the current problems and prospects of philately in the region. The stamp collection in the National Museum fills 4 albums of various sizes and a number of envelopes with 1-72 stamps in each. The compilers of 2 albums attempted to systematize stamps by issue date, but this work is far from complete. There is no definitive collection of Tuvan stamps to act as a model for others, regardless of the quality of the stamps preserved. The rest of the stamps in the museum collection is in unsorted state. Overall, the degree of preservation can be tentatively described as average. Given the great interest of scholars and collectors, Tuvan stamps are relatively little studies. The overall bulk of material on the uses of stamps in Tuva lacks an overarching study. We have summed up the main research problems that call for in-depth research, including studying Tuvan stamps as pieces of art, the financial and economic viability of issuing stamps in PRT, the official documentations licensing the issue, full catalogization of all existing issues, the study of individual stamps, etc. Especially urgent is the issue of propagating knowledge of history of Tuvan postal service as a precondition for collecting and preserving PRT stamps. Archives of many Tuvan families may contain unique stamps, rare envelopes or postcards – but few of their owners recognize the full value of what they have. This puts unique

  10. New method for springback compensation for the stamping of sheet metal components

    Science.gov (United States)

    Birkert, A.; Hartmann, B.; Straub, M.

    2017-09-01

    The need for car body structures of higher strength and at the same time lower weight results in serious challenges for the stamping process. Especially the use of high strength steel and aluminium sheets is causing growing problems with regard to elastic springback. To produce accurate parts the stamping dies must be adjusted more or less by the amount of the springback in the opposite direction. For this purpose well-known software solutions use the Displacement Adjustment Method or algorithms which are closely based on that method. A crucial issue of this method is that the generated die surfaces deviate from those of the target geometry with regard to surface area. A new Physical Compensation Method has been developed and validated which takes geometrical nonlinearity into account and creates compensated die geometries with equal-in-area die surfaces. In contrast to the standard mathematical/geometrical approach, the adjusted geometry is generated by a physical approach, which makes use of the virtual part stiffness. Hereby the target geometry is being deformed mechanically in a virtual process based on the springback simulation results by applying virtual forces in an additional elastic simulation. By doing so better part dimensions can be obtained in less tool optimization loops.

  11. A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels

    Science.gov (United States)

    Şimşir, C.; Çetin, B.; Efe, M.; Davut, K.; Bayramin, B.

    2017-09-01

    Recent studies showed that, during stamping of high strength steels at industrially relevant production rates, local temperature in the blank may rise up to 200°C - 300°C due to deformation heating. Moreover, die temperature may also rise up to 100°C - 150°C for progressive stamping dies. Based on the common assumption that the blank softens as the temperature increases, thermal softening creates a margin in Forming Limit Diagram (FLD) and therefore the FLD determined at room temperature can safely be used for those cases. In this article, the validity of this assumption on DP590 steel is questioned by high temperature tensile tests (RT - 300°C) at various strain rates (10-3 s-1 - 1 s-1). The results indicated a decrease both in uniform and total elongation in 200°C - 300°C range together with several other symptoms of Dynamic Strain Aging (DSA) at all strain rates. Concurrent with the DSA, the simulated FLD confirms the lower formability at high temperature and strain rates. Thus, it is concluded FLD determined at RT may not be valid for the investigated steels.

  12. Predication of coke strength from textural analysis of stamp charged coke supported by coal petrography

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, R.; Dash, P.S.; Chakraborty, D.; Banerjee, P.K.; Kumar, D. [Tata Steel, Jamshedpur (India)

    2005-07-01

    Materials science tells us that defects or flaws in a solid material control the mechanical behaviour of that material. Similarly, in a coke, its strength is associated with the microstructure and texture. Optical microscopy is the most appropriate method for measuring these features. Attempts were made to correlate different types of textures with the strength of stamp charged coke at Tata Steel. The studies revealed that anisotropic carbon is less reactive to carbon dioxide compared to isotropic carbon. There may be two reasons for this: a lower surface area of the carbon available for reaction; the intrinsic reactivity may be lower for molecules which constitute anisotropic carbon. The strength after reaction depends on its anisotropic texture - the smaller size mosaic texture contributes to higher post strength. There are very few reports about use of micro textural analysis to predict cold strength of coke. Test results show that there exists an influence of isotropic carbon on M{sub 10} index. With an increase in isotropic texture, the M{sub 10} index deteriorates. The performance of coke in blast furnaces may be improved by improving room temperature and high temperature strength of coke by selecting coal with higher vitrinite distribution in the present blend through the stamp charging route. 18 refs., 12 figs., 3 tabs.

  13. Virtual method for the determination of an optimum thermal design of hot stamping tools

    Science.gov (United States)

    Weiß, W.; Koplenig, M.; Alb, M.; Graf, J.

    2016-11-01

    This work presents a new virtual method for the optimised thermal design of hot stamping tools. It provides optimal positions of the tool's tempering ducts with respect to the average working temperature and its homogeneous distribution on the surface of a tool. It consists of a specific procedure for hot stamping tool design and a software framework in order to interconnect three domains: (I) a parametrised CAD tool model, (II) a linear thermal solver using a fast boundary element method and (III) an optimisation algorithm. This enables the automated set-up, simulation and optimisation of a duct topology. The boundary conditions for the simulations are derived from a reduced model of the thermal loading of the tool. The virtual method proposed is demonstrated on simplified tool segment geometries. The results are transferred to complex tool designs used in industry. For a selected use case, the number of ducts could be reduced by 50% through the application of the proposed method. These results are validated virtually based on an existing design. Hence, the new virtual method contributes to a CAE-driven tool design and a more efficient tool manufacturing.

  14. Studies on the finite element simulation in sheet metal stamping processes

    Science.gov (United States)

    Huang, Ying

    The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

  15. Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project

    Science.gov (United States)

    Carl Houtman; Daniel Seiter; Nancy Ross Sutherland; Donald Donermeyer

    2002-01-01

    The ultimate goal of the US Postal Service (USPS) Environmentally Benign Stamp Program is to develop stamp laminates, i.e., face paper, adhesive and siliconized liner, that do not cause difficulties in recycling mills. The criterion for success, and the USPS definition of benignity, is the avoidance of process and product quality hardships when such PSA laminates are...

  16. Unfolding Participation

    DEFF Research Database (Denmark)

    Saad-Sulonen, Joanna; Halskov, Kim; Eriksson, Eva

    2015-01-01

    The aim of the Unfolding Participation workshop is to outline an agenda for the next 10 years of participatory design (PD) and participatory human computer interaction (HCI) research. We will do that through a double strategy: 1) by critically interrogating the concept of participation (unfolding...... the concept itself), while at the same time, 2) reflecting on the way that participation unfolds across different participatory configurations. We invite researchers and practitioners from PD and HCI and fields in which information technology mediated participation is embedded (e.g. in political studies......, urban planning, participatory arts, business, science and technology studies) to bring a plurality of perspectives and expertise related to participation....

  17. Reliability Modeling of Critical Electronic Devices.

    Science.gov (United States)

    1983-05-01

    Electronics, Vol. QE-15, No. 1, up January 1979, pp. 11-13. 15. Newman, D.H. and Ritchie, S., Degradation Pnenomena in Gallium Aluminium Arsenide Stripe...8217RESERVOIR COLD CATHODE TRAP FIGURE 7.2-1: HELIUM-CADMIUM LASER TUBE Principle design considerations relating to the lifetime of the device include (Ref 1): o...available in two basic design types. The contact design is either screw machined or stamped and formed. The screw machined contacts are close entry

  18. Conceptualizing Participation

    DEFF Research Database (Denmark)

    Simovska, Venka; Bruun Jensen, Bjarne

    and society. It then describes different forms, modes or qualities of participation and proposes a specific model of facilitating participatory work with young people - the IVAC approach (Investigation-Vision-Action-Change). The concept of action, types of actions aimed at initiating change and corresponding...... types of knowledge necessary to equip young people to participate in meaningful ways are outlined before some dilemmas, challenges and participatory issues are considered. Regardless of the level or scope of participation, it is imperative that participation of young people in decision...

  19. Modeling and simulation of stamp deflections in nanoimprint lithography: Exploiting backside grooves to enhance residual layer thickness uniformity

    DEFF Research Database (Denmark)

    Taylor, Hayden; Smistrup, Kristian; Boning, Duane

    2011-01-01

    We describe a model for the compliance of a nanoimprint stamp etched with a grid of backside grooves. We integrate the model with a fast simulation technique that we have previously demonstrated, to show how etched grooves help reduce the systematic residual layer thickness (RLT) variations...

  20. 75 FR 52981 - Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-08-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC; Twinsburg Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Wackenhut Security, CR Associates, and Syncreon, Twinsburg, OH; Amended Certification Regarding...

  1. 75 FR 11913 - Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight...

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chrysler, LLC, Sterling Stamping Plant, Including On-Site Leased Workers from Caravan Knight Facilities Management LLC, Sterling Heights, MI; Amended Certification Regarding Eligibility To Apply for Worker Adjustment...

  2. The new Swiss commemorative stamp dedicated to CERN available at the Organization's Meyrin post office on Tuesday, 9 March!

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For some people, the stamp's rays are spreading outwards towards the infinitely large, while for others they focus inwards towards the infinitely small. It's a bit like the proverbial half-full or half-empty glass or a picture that conveys two different images, depending on how you look at it.

  3. Forming of an axially tailored automotive channel section through hot stamping of tailor-welded blanks

    Science.gov (United States)

    Peister, C.; George, R.; Omer, K.; Worswick, M. J.; Malcolm, S.; Dykeman, J.; Yau, C.; Soldaat, R.; Bernert, W.

    2017-09-01

    In this work, top-hat cross-section axial crush rail specimens with tailored properties along their length were investigated. These top-hat channels were hot stamped in a fully cooled die set from tailor-welded blanks (TWBs). The blanks were laser-welded and comprised Usibor® 1500-AS joined to Ductibor® 500-AS in 1.2 mm and 1.6 mm thicknesses. Micro-hardness measurements were taken along the length of the formed specimens to map the hardness profile along their length. The effect of gauge thickness on hardness was evaluated. The hardness profile of these TWB parts was compared to that of parts formed using tailored in-die heating (IDH).

  4. Weld Repair of a Stamped Pressure Vessel in a Radiologically Controlled Zone

    Energy Technology Data Exchange (ETDEWEB)

    Cannell, Gary L. [Fluor Enterprises, Inc.; Huth, Ralph J. [CH2MHill Plateau Remediation Company; Hallum, Randall T. [Fluor Government Group

    2013-08-26

    In September 2012 an ASME B&PVC Section VIII stamped pressure vessel located at the DOE Hanford Site Effluent Treatment Facility (ETF) developed a through-wall leak. The vessel, a steam/brine heat exchanger, operated in a radiologically controlled zone (by the CH2MHill PRC or CHPRC), had been in service for approximately 17 years. The heat exchanger is part of a single train evaporator process and its failure caused the entire system to be shut down, significantly impacting facility operations. This paper describes the activities associated with failure characterization, technical decision making/planning for repair by welding, logistical challenges associated with performing work in a radiologically controlled zone, performing the repair, and administrative considerations related to ASME code requirements.

  5. Scandiatransplant acceptable mismatch program (STAMP) a bridge to transplanting highly immunized patients

    DEFF Research Database (Denmark)

    Koefoed-Nielsen, Pernille; Weinreich, I; Bengtsson, M

    2017-01-01

    BACKGROUND: Highly immunized patients are a challenge for organ transplantation programs. One way of increasing the likelihood of transplantation in this group of patients is to expand the possible donations by defining acceptable HLA mismatches. In the Scandiatransplant Acceptable Mismatch Program...... (STAMP), a de-centralized approach has been implemented in 2009. AIMS: The program has been improved during the years from utilizing HLA-A, -B, -DR matching only to include typing of all deceased donors for HLA-A, -B, -C, -DRB1 and -DQB1. The calculation of a transplantability score (TS) has been...... introduced in order to take both HLA and AB0 into consideration resulting in a more realistic picture of the transplantability chance. MATERIALS AND METHODS: Patients were selected for eligibility and results of immunisation status were prepared in each of the 9 tissue typing laboratories, while access...

  6. Construction of Time-Stamped Mobility Map for Path Tracking via Smith-Waterman Measurement Matching

    Directory of Open Access Journals (Sweden)

    Mu Zhou

    2014-01-01

    Full Text Available Path tracking in wireless and mobile environments is a fundamental technology for ubiquitous location-based services (LBSs. In particular, it is very challenging to develop highly accurate and cost-efficient tracking systems applied to the anonymous areas where the floor plans are not available for security and privacy reasons. This paper proposes a novel path tracking approach for large Wi-Fi areas based on the time-stamped unlabeled mobility map which is constructed from Smith-Waterman received signal strength (RSS measurement matching. Instead of conventional location fingerprinting, we construct mobility map with the technique of dimension reduction from the raw measurement space into a low-dimensional embedded manifold. The feasibility of our proposed approach is verified by the real-world experiments in the HKUST campus Wi-Fi networks, sMobileNet. The experimental results prove that our approach is adaptive and capable of achieving an adequate precision level in path tracking.

  7. SOCIAL RESPONSIBILITY SCORE: COMPARATIVE STUDY BETWEEN PUBLIC And PRIVATE COMPANIES, BASED In ibase SOCIAL stamp

    Directory of Open Access Journals (Sweden)

    Alexandre Reis

    2008-01-01

    Full Text Available The present article intends to arguing the existing differences and similarities between Social Responsibility actions and praticals developed by the private and public companies. This comparative study of exploring character was carried with the companies owners of Social Stamp IBASE, wich published its Social Balances in the model considered for the institute in the year of 2004. For such, beyond the documentary research involving the published balances, a conceptual revision over the main subjects was necessary and also it constitutes part of the study. The joined results supply measurable and representative information about the main characteristics of social action of the companies, propitiating a comparative analysis and the emission of critical considerations, that do not finish themselves, but establishes a possibility of different readings concerning the models of social responsible management undertaken by companies from public and private segments.

  8. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Science.gov (United States)

    Jelovica Badovinac, I.; Orlić, N.; Lofrumento, C.; Dobrinić, J.; Orlić, M.

    2010-07-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  9. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    Energy Technology Data Exchange (ETDEWEB)

    Jelovica Badovinac, I., E-mail: ijelov@phy.uniri.h [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Orlic, N. [Department of Physics, University of Rijeka, Omladinska 14, 51000 Rijeka (Croatia); Lofrumento, C. [Dipartimento di Chimica, Universita di Firenze, Via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Dobrinic, J. [Faculty of Engineering, University of Rijeka, Vukovarska 58, 51000 Rijeka (Croatia); Orlic, M. [Department of Civil Engineering, Polytechnic of Zagreb, Av. V. Holjevca 15, 10000 Zagreb (Croatia)

    2010-07-21

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  10. Spectral analysis of postage stamps and banknotes from the region of Rijeka in Croatia

    International Nuclear Information System (INIS)

    Jelovica Badovinac, I.; Orlic, N.; Lofrumento, C.; Dobrinic, J.; Orlic, M.

    2010-01-01

    Micro-Raman spectroscopy and X-ray emission spectroscopy induced using radioactive source have been applied to analyze two types of samples important for the history of Rijeka, Croatian port on the Adriatic Sea. In this paper we will present study of thirty-three original Hungarian postage stamps issued for Rijeka and overprinted with the word FIUME in 1918, after the World War I and the one-Lira banknotes (one original brown banknote and four trial prints: brown, blue, green and dark green) from Economy bank for Rijeka, Istria and Slovenian Littoral (1945-1947), the so-called Jugolire. This investigation was carried out to determine the differences between the original machine, original hand-made and fake overprints FIUME and to compare the pigments used on original banknote from circulation with the pigments on the trial prints.

  11. Finite element analysis and optimization of process parameters during stamp forming of composite materials

    International Nuclear Information System (INIS)

    Venkatesan, S; Kalyanasundaram, S

    2010-01-01

    In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

  12. Determination of stamp deformation during imprinting on semi-spherical surfaces

    DEFF Research Database (Denmark)

    Kafka, Jan; Matschuk, Maria; Pranov, Henrik

    of sol-gel was applied onto spherical injection mold inserts and subsequently imprinted using a flexible stamp. A hard curing step transformed the sol-gel into a quartz-like and durable material. As an example, we present theory and results regarding the imprint of pillar nanostructures on semi......-spherical mold surfaces. Imprints were realized on three different radii of circumferenceof the spherical mold: R = 0.5 mm, R = 1.0 mm, and R = 2 mm. After hard-curing of theimprinted sol-gel, the inserts were used for cold-mold as well as vario-therm injection molding.The polymer replicas and the inserts were...

  13. Time-stamp correction of magnetic observatory data acquired during unavailability of time-synchronization services

    Science.gov (United States)

    Coïsson, Pierdavide; Telali, Kader; Heumez, Benoit; Lesur, Vincent; Lalanne, Xavier; Jiang Xin, Chang

    2017-09-01

    During magnetic observatory data acquisition, the data time stamp is kept synchronized with a precise source of time. This is usually done using a GPS-controlled pulse per second (PPS) signal. For some observatories located in remote areas or where internet restrictions are enforced, only the magnetometer data are transmitted, limiting the capabilities of monitoring the acquisition operations. The magnetic observatory in Lanzhou (LZH), China, experienced an unnoticed interruption of the GPS PPS starting 7 March 2013. The data logger clock drifted slowly in time: in 6 months a lag of 27 s was accumulated. After a reboot on 2 April 2014 the drift became faster, -2 s per day, before the GPS PPS could be restored on 8 July 2014. To estimate the time lags that LZH time series had accumulated, we compared it with data from other observatories located in East Asia. A synchronization algorithm was developed. Natural sources providing synchronous events could be used as markers to obtain the time lag between the observatories. The analysis of slices of 1 h of 1 s data at arbitrary UTC allowed estimating time lags with an uncertainty of ˜ 11 s, revealing the correct trends of LZH time drift. A precise estimation of the time lag was obtained by comparing data from co-located instruments controlled by an independent PPS. In this case, it was possible to take advantage of spikes and local noise that constituted precise time markers. It was therefore possible to determine a correction to apply to LZH time stamps to correct the data files and produce reliable 1 min averaged definitive magnetic data.

  14. Framework for simulation-driven design of stamping dies considering elastic die and press deformations

    Science.gov (United States)

    Pilthammar, Johan; Wall, Johan; Sigvant, Mats

    2017-10-01

    Sheet metal forming (SMF) simulations are used extensively throughout the development phase of industrial stamping dies. In these SMF simulations, the die and press are normally considered as rigid. Previous research has however shown that elastic deformation in these parts has a significant negative impact on process performance. This paper demonstrates methods for counteracting these negative effects, with a high potential for improved production support and a reduced lead time through a shorter try-out process. A structural finite element model (FE-model) of a simplified die is studied. To account for elastic deformation, the blankholder surfaces are first virtually reworked by adjusting the nodal positions on the die surfaces attaining a pressure distribution in accordance to the design phase SMF simulations with rigid surfaces. The elastic FE-model with reworked surfaces then represents a stamping die in running production. The die is now assumed to be exposed to changed process conditions giving an undesired blankholder pressure distribution. The changed process conditions could for example be due to a change of press line. An optimization routine is applied to compensate the negative effects of the new process conditions. The optimization routine uses the contact forces acting on the shims of the spacer blocks and cushion pins as optimization variables. A flexible simulation environment using MATLAB and ABAQUS is used. ABAQUS is executed from MATLAB and the results are automatically read back into MATLAB. The suggested optimization procedure reaches a pressure distribution very similar to the initial distribution assumed to be the optimum, and thereby verifying the method. Further research is needed for a method to transform the calculated forces in the optimization routine back to shims thicknesses. Furthermore, the optimization time is relatively long and needs to be reduced in the future for the method to reach its full potential.

  15. Recognition of Time Stamps on Full-Disk Hα Images Using Machine Learning Methods

    Science.gov (United States)

    Xu, Y.; Huang, N.; Jing, J.; Liu, C.; Wang, H.; Fu, G.

    2016-12-01

    Observation and understanding of the physics of the 11-year solar activity cycle and 22-year magnetic cycle are among the most important research topics in solar physics. The solar cycle is responsible for magnetic field and particle fluctuation in the near-earth environment that have been found increasingly important in affecting the living of human beings in the modern era. A systematic study of large-scale solar activities, as made possible by our rich data archive, will further help us to understand the global-scale magnetic fields that are closely related to solar cycles. The long-time-span data archive includes both full-disk and high-resolution Hα images. Prior to the widely use of CCD cameras in 1990s, 35-mm films were the major media to store images. The research group at NJIT recently finished the digitization of film data obtained by the National Solar Observatory (NSO) and Big Bear Solar Observatory (BBSO) covering the period of 1953 to 2000. The total volume of data exceeds 60 TB. To make this huge database scientific valuable, some processing and calibration are required. One of the most important steps is to read the time stamps on all of the 14 million images, which is almost impossible to be done manually. We implemented three different methods to recognize the time stamps automatically, including Optical Character Recognition (OCR), Classification Tree and TensorFlow. The latter two are known as machine learning algorithms which are very popular now a day in pattern recognition area. We will present some sample images and the results of clock recognition from all three methods.

  16. Ambivalent participation

    DEFF Research Database (Denmark)

    Groes-Green, Christian

    2012-01-01

    Participation in young peoples' sexual cultures in Maputo, Mozambique led to reflections about the field dynamics of power, participation, desire, and discomfort. Structural inequalities of race, gender, and educational status resulted in informants seeing me as a morally righteous person to whom...

  17. Employee Participation

    Science.gov (United States)

    Jarratt, Alex

    1975-01-01

    The article presents another approach to individual motivation--participative management--which concerns an emotional rather than financial commitment to the job through involvement and job satisfaction. The author favors within this approach: employee participation in decision-making, entitlement to information, and the establishment of…

  18. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    International Nuclear Information System (INIS)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-01-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration

  19. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

  20. Authoring Participation

    DEFF Research Database (Denmark)

    Papazu, Irina

    2016-01-01

    Samsø, Denmark's Renewable Energy Island since 1997, is world renowned for being self-sufficient in renewable energy and for having achieved energy self-sufficiency and CO2 neutrality through successful processes of public participation. In this article I seek to show how these processes of public...... participation so central to the Renewable Energy Island project can be better understood as instances of material participation motivated first and foremost by a concern for the future of the island as a 'liveable' community; a community in which jobs and institutions are not constantly threatening to disappear...

  1. On the participation of photoinduced N-H bond fission in aqueous adenine at 266 and 220 nm: a combined ultrafast transient electronic and vibrational absorption spectroscopy study.

    Science.gov (United States)

    Roberts, Gareth M; Marroux, Hugo J B; Grubb, Michael P; Ashfold, Michael N R; Orr-Ewing, Andrew J

    2014-11-26

    A combination of ultrafast transient electronic absorption spectroscopy (TEAS) and transient vibrational absorption spectroscopy (TVAS) is used to investigate whether photoinduced N–H bond fission, mediated by a dissociative 1πσ(*) state, is active in aqueous adenine (Ade) at 266 and 220 nm. In order to isolate UV/visible and IR spectral signatures of the adeninyl radical (Ade[-H]), formed as a result of N–H bond fission, TEAS and TVAS are performed on Ade in D2O under basic conditions (pD = 12.5), which forms Ade[-H](-) anions via deprotonation at the N7 or N9 sites of Ade's 7H and 9H tautomers. At 220 nm we observe one-photon detachment of an electron from Ade[-H](-), which generates solvated electrons (eaq(-)) together with Ade[-H] radicals, with clear signatures in both TEAS and TVAS. Additional wavelength dependent TEAS measurements between 240–260 nm identify a threshold of 4.9 ± 0.1 eV (∼250 nm) for this photodetachment process in D2O. Analogous TEAS experiments on aqueous Ade at pD = 7.4 generate a similar photoproduct signal together with eaq(-) after excitation at 266 and 220 nm. These eaq(-) are born from ionization of Ade, together with Ade(+) cations, which are indistinguishable from Ade[-H] radicals in TEAS. Ade(+) and Ade[-H] are found to have different signatures in TVAS and we verify that the pD = 7.4 photoproduct signal observed in TEAS following 220 nm excitation is solely due to Ade(+) cations. Based on these observations, we conclude that: (i) N–H bond fission in aqueous Ade is inactive at wavelengths ≥220 nm; and (ii) if such a channel exists in aqueous solution, its threshold is strongly blue-shifted relative to the onset of the same process in gas phase 9H-Ade (≤233 nm). In addition, we extract excited state lifetimes and vibrational cooling dynamics for 9H-Ade and Ade[-H](-). In both cases, excited state lifetimes of <500 fs are identified, while vibrational cooling occurs within a time frame of 4–5 ps. In contrast, 7H

  2. Participation of electronic excited states in the positronium formation mechanism in the Gd(III) pentakis (picrate) complexes with imidazolium countercations

    Energy Technology Data Exchange (ETDEWEB)

    Fulgêncio, F., E-mail: fefulgencio@gmail.com [Departam ento de Química – ICEx Universidade Federal de Minas Gerais – UFMG, Belo Horizonte, MG (Brazil); Borges, A.S. [Coordenadoria de Química e Biologia – Instituto Federal do Espírito Santos – IFES, Campus Vitória, ES (Brazil); Araújo, M.H. [Departam ento de Química – ICEx Universidade Federal de Minas Gerais – UFMG, Belo Horizonte, MG (Brazil); Brito, H.F. [Instituto de Química, Departamento de Química Fundamental, Universidade de São Paulo, São Paulo (Brazil); Oliveira, F.C. [Departamento de Metalurgia e Química, Centro Federal de Educação Tecnológica de Minas Gerais – CEFET-MG, Campus Timóteo, MG (Brazil); Ribeiro, T.; Windmöller, D. [Departam ento de Química – ICEx Universidade Federal de Minas Gerais – UFMG, Belo Horizonte, MG (Brazil); Magalhães, W.F., E-mail: welmag@ufmg.br [Departam ento de Química – ICEx Universidade Federal de Minas Gerais – UFMG, Belo Horizonte, MG (Brazil)

    2016-02-15

    In this work, positron annihilation lifetime (PALS) and optical spectroscopies measurements were performed on [Gd(pic){sub 2}(H{sub 2}O){sub 6}](pic)·6H{sub 2}O and on complexes of general formula C{sub 2}[Gd(pic){sub 5}], where pic corresponds to picrate ligands and C to the countercations butyl-methyl, hexyl-methyl, butyl-ethyl and butyl-butyl imidazoles. Since all of these complexes have high energy ligand-to-metal charge transfer states (LMCTS) but form low amounts of Positronium (Ps), the LMCTS do not act here as a mechanism that suppress luminescence nor prevents Ps formation. This result suggests that, besides LMCTS, other effects should also contribute to prevent Ps formation. The results indicate that the electron withdrawing –NO{sub 2} groups in the picrate ligand are responsible by the effect that prevents Ps formation. Also, a rough correlation between the ligands' triplet states lifetimes and Ps formation was observed. The insertion of electron donor groups (the imidazolium countercations) increased the ligands' first triplet excited states ({sup 3}π{sup ⁎}) lifetimes and Ps formation, indicating that these two spectroscopic parameters are correlated. Also, it is demonstrated that there is no clear correlation between Ps formation probability and the excitation energy of the ligands' first triplet excited states. The results were discussed in terms of the recently proposed Ps formation mechanism, named cybotactic correlated system kinetic mechanism (CCSKM), showing that the Ps formation process involves molecular excited states and is kinetically controlled. - Highlights: • PALS and optical spectroscopies measurements performed on Gd{sup 3+} complexes. • A correlation was obtained between the ligands' {sup 3}π{sup ⁎} lifetimes and Ps formation. • Electronegative groups increased the ligands' {sup 3}π{sup ⁎} lifetimes and Ps formation. • Results discussed in terms of a new Ps formation mechanism (ccskm).

  3. Studies of OC-STAMP in Osteoclast Fusion: A New Knockout Mouse Model, Rescue of Cell Fusion, and Transmembrane Topology.

    Directory of Open Access Journals (Sweden)

    Hanna Witwicka

    Full Text Available The fusion of monocyte/macrophage lineage cells into fully active, multinucleated, bone resorbing osteoclasts is a complex cell biological phenomenon that utilizes specialized proteins. OC-STAMP, a multi-pass transmembrane protein, has been shown to be required for pre-osteoclast fusion and for optimal bone resorption activity. A previously reported knockout mouse model had only mononuclear osteoclasts with markedly reduced resorption activity in vitro, but with paradoxically normal skeletal micro-CT parameters. To further explore this and related questions, we used mouse ES cells carrying a gene trap allele to generate a second OC-STAMP null mouse strain. Bone histology showed overall normal bone form with large numbers of TRAP-positive, mononuclear osteoclasts. Micro-CT parameters were not significantly different between knockout and wild type mice at 2 or 6 weeks old. At 6 weeks, metaphyseal TRAP-positive areas were lower and mean size of the areas were smaller in knockout femora, but bone turnover markers in serum were normal. Bone marrow mononuclear cells became TRAP-positive when cultured with CSF-1 and RANKL, but they did not fuse. Expression levels of other osteoclast markers, such as cathepsin K, carbonic anhydrase II, and NFATc1, were not significantly different compared to wild type. Actin rings were present, but small, and pit assays showed a 3.5-fold decrease in area resorbed. Restoring OC-STAMP in knockout cells by lentiviral transduction rescued fusion and resorption. N- and C-termini of OC-STAMP were intracellular, and a predicted glycosylation site was shown to be utilized and to lie on an extracellular loop. The site is conserved in all terrestrial vertebrates and appears to be required for protein stability, but not for fusion. Based on this and other results, we present a topological model of OC-STAMP as a 6-transmembrane domain protein. We also contrast the osteoclast-specific roles of OC- and DC-STAMP with more generalized

  4. The feasibility of using electronic clinical outcome assessments in people with schizophrenia and their informal caregivers

    Directory of Open Access Journals (Sweden)

    Tolley C

    2015-03-01

    Full Text Available Chloe Tolley,1 Diana Rofail,2 Adam Gater,1 Justine K Lalonde31Adelphi Values Ltd, Bollington, UK; 2Roche Products Ltd, Welwyn Garden City, UK; 3Roche S.A.S, Paris, France Abstract: Many clinical outcome assessments (COAs were originally developed for completion via pen and paper. However, in recent years there have been movements toward electronic capture of such data in an effort to reduce missing data, provide time-stamped records, minimize administrative burden, and avoid secondary data entry errors. Although established in many patient populations, the implications of using electronic COAs in schizophrenia are unknown. In accordance with International Society for Pharmacoeconomics and Outcomes Research (ISPOR Task Force recommendations, in-depth cognitive debriefing and usability interviews were conducted with people with schizophrenia (n=12, their informal (unpaid caregivers (n=12, and research support staff (n=6 to assess the suitability of administration of various electronic COA measures using an electronic tablet device. Minimal issues were encountered by participants when completing or administering the COAs in electronic format, with many finding it easier to complete instruments in this mode than by pen and paper. The majority of issues reported were specific to the device functionality rather than the electronic mode of administration. Findings support data collection via electronic tablet in people with schizophrenia and their caregivers. The appropriateness of other forms of electronic data capture (eg, smartphones, interactive voice response systems, etc is a topic for future investigation. Keywords: ePRO, eCOA, mode of administration, electronic data capture, usability 

  5. Microstructure and Tensile-Shear Properties of Resistance Spot Welded 22MnMoB Hot-Stamping Annealed Steel

    Science.gov (United States)

    Li, Yang; Cui, Xuetuan; Luo, Zhen; Ao, Sansan

    2017-01-01

    The present paper deals with the joining of 22MnMoB hot-stamping annealed steel carried out by the spot welding process. Microstructural characterization, microhardness testing and tensile-shear testing were conducted. The effects of the welding parameters, including the electrode tip diameter, welding current, welding time and electrode force upon the tensile-shear properties of the welded joints, were investigated. The results showed that a weld size of 9.6 mm was required to ensure pullout failure for the 1.8 -mm-thick hot-stamping annealed steel sheet. The welding current had the largest influence upon the tensile-shear properties of the 22MnMoB steel welded joint. The bulk resistance should play an important role in the nugget formation. In pullout failure mode, failure was initiated at the heat-affected zone, where softening occurs owing to the tempering of martensite.

  6. Characterization of patterns of Localized Doping Using Stamping technique for Selective n-Emitter Solar Cell Structure

    Science.gov (United States)

    Mangkornkaew, A.; Fangsuwannarak, T.

    2017-10-01

    In the present, a novel cost-effective process scheme for single step selective emitter diffusion was implemented. It is based on the fabrication of acid-resist pattern using a stamping technique with collaboration of a spin on dopant (SOD) and chemical etched-back emitter methods. The SOD diffusion process provided heavily doping n-emitter. Acid-resist pattern without exploitation of a complex method as a photolithography, was stamped as a metal contact pattern for prevention of a localized heavy-dope region from etching back. Phosphorus doping profiles were controlled by etching back time to provide the formation of n-type selective emitter. Sheet resistance is tunable from 10 to 180 Ohm/Sq on localized n-layer. After removal of the patterned acid-resist, the selective n-emitter solar cell structure was obtained under one-step diffusion to achieve a better blue-light response and low contact resistance.

  7. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    OpenAIRE

    Dong Y.; Formosa D.; Fernandez J.; Li X.; Fuentes G.; Zoltan K.; Dong H.

    2015-01-01

    In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tr...

  8. Development of a new biaxial testing system for generating forming limit diagrams for sheet metals under hot stamping conditions

    OpenAIRE

    Shao, Z; Li, N; Lin, J; Dean, TA

    2016-01-01

    Conventional experimental approaches used to generate forming limit diagrams (FLDs) for sheet metals at different linear strain paths are not applicable to hot stamping and cold die quenching processes because cooling occurs prior to deformation and consistent values of heating rate, cooling rate, deformation temperature and strain rate are not easy to obtain. A novel biaxial testing system for use in a Gleeble testing machine has been adopted to generate forming limits of sheet metals, inclu...

  9. Image Subtraction Reduction of Open Clusters M35 & NGC 2158 in the K2 Campaign 0 Super Stamps

    Science.gov (United States)

    Soares-Furtado, M.; Hartman, J. D.; Bakos, G. Á.; Huang, C. X.; Penev, K.; Bhatti, W.

    2017-04-01

    We observed the open clusters M35 and NGC 2158 during the initial K2 campaign (C0). Reducing these data to high-precision photometric timeseries is challenging due to the wide point-spread function (PSF) and the blending of stellar light in such dense regions. We developed an image-subtraction-based K2 reduction pipeline that is applicable to both crowded and sparse stellar fields. We applied our pipeline to the data-rich C0 K2 super stamp, containing the two open clusters, as well as to the neighboring postage stamps. In this paper, we present our image subtraction reduction pipeline and demonstrate that this technique achieves ultra-high photometric precision for sources in the C0 super stamp. We extract the raw light curves of 3960 stars taken from the UCAC4 and EPIC catalogs and de-trend them for systematic effects. We compare our photometric results with the prior reductions published in the literature. For de-trended TFA-corrected sources in the 12-12.25 {{{K}}}{{p}} magnitude range, we achieve a best 6.5-hour window running rms of 35 ppm, falling to 100 ppm for fainter stars in the 14-14.25 {{{K}}}{{p}} magnitude range. For stars with {K}p> 14, our de-trended and 6.5-hour binned light curves achieve the highest photometric precision. Moreover, all our TFA-corrected sources have higher precision on all timescales investigated. This work represents the first published image subtraction analysis of a K2 super stamp. This method will be particularly useful for analyzing the Galactic bulge observations carried out during K2 campaign 9. The raw light curves and the final results of our de-trending processes are publicly available at http://k2.hatsurveys.org/archive/.

  10. Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P)

    International Nuclear Information System (INIS)

    Ariza, E.A.; Nishikawa, A.S; Goldenstein, H.; Tschiptschin, A.P.

    2016-01-01

    Thermomechanical simulation of quenching, hot stamping, and quenching and partitioning processes of a high-strength TRIP-assisted steel were carried out in a Gleeble®3S50 thermo-mechanical simulator, coupled to the synchrotron X-ray diffraction line. The microstructures and mechanical properties were analyzed using Field Emission Gun Scanning Electron Microscopy (FEG-SEM), X-ray diffraction, and nanoindentation. The microstructures of thermomechanical treated specimens were modeled using the Object Oriented Finite Element (OOF) technique. The modeled microstructures were then fed into a finite element model to predict the mechanical behavior. By using a reverse algorithm method, the elasto-plastic mechanical properties of different microconstituents were determined. This was done through the analysis of instrumented nanoindentation loading-penetration curves. Tensile properties of the thermomechanical processed steels were measured by tensile testing of subsized specimens cut from samples processed on the Gleeble®3S50. The comparison between the experimental results and those of the reverse algorithm and the OOF modeled microstructure showed quite good agreement.

  11. Characterization and methodology for calculating the mechanical properties of a TRIP-steel submitted to hot stamping and quenching and partitioning (Q&P)

    Energy Technology Data Exchange (ETDEWEB)

    Ariza, E.A., E-mail: andersonariza@usp.br [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Brazilian Nanotechnology National Laboratory, LNNano, CNPEM, Brazilian Center for Research in Energy and Materials (Brazil); Nishikawa, A.S; Goldenstein, H. [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Tschiptschin, A.P. [Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, São Paulo, SP CEP 05508-030 (Brazil); Brazilian Nanotechnology National Laboratory, LNNano, CNPEM, Brazilian Center for Research in Energy and Materials (Brazil)

    2016-08-01

    Thermomechanical simulation of quenching, hot stamping, and quenching and partitioning processes of a high-strength TRIP-assisted steel were carried out in a Gleeble®3S50 thermo-mechanical simulator, coupled to the synchrotron X-ray diffraction line. The microstructures and mechanical properties were analyzed using Field Emission Gun Scanning Electron Microscopy (FEG-SEM), X-ray diffraction, and nanoindentation. The microstructures of thermomechanical treated specimens were modeled using the Object Oriented Finite Element (OOF) technique. The modeled microstructures were then fed into a finite element model to predict the mechanical behavior. By using a reverse algorithm method, the elasto-plastic mechanical properties of different microconstituents were determined. This was done through the analysis of instrumented nanoindentation loading-penetration curves. Tensile properties of the thermomechanical processed steels were measured by tensile testing of subsized specimens cut from samples processed on the Gleeble®3S50. The comparison between the experimental results and those of the reverse algorithm and the OOF modeled microstructure showed quite good agreement.

  12. The Choices programme: a simple, front-of-pack stamp making healthy choices easy.

    Science.gov (United States)

    Dötsch-Klerk, Mariska; Jansen, Léon

    2008-01-01

    Some food products fit better within a healthy diet than others, but how can consumers tell? The Choices programme is a simple and internationally-applicable programme to help consumers make a healthy choice on food and beverages and to stimulate industry towards healthy product innovation in all food groups. The essence of the programme is a front-of-pack stamp on products that pass an evaluation against scientific criteria. To that end generic criteria have been established for levels of saturated fat, trans fat, sugars and sodium, which are based on international dietary guidelines (FAO/WHO). For some food categories there are specific criteria for these nutrients as well as for dietary fibre and calories. In this way the criteria are challenging without being impossible to meet. The programme has been initiated by food industry and is open to all companies in food industry, retail and catering. The approach is also supported by nutritional scientists, governments and NGOs. An independent scientific committee is responsible for designing and periodically reviewing the qualifying criteria. The current qualifying criteria were developed by scientific committees in the Netherlands and Belgium. These criteria will now be reviewed by an International Scientific Committee, consisting of internationally-recognised food and nutrition experts. To accommodate the developments in nutrition science and food technology, this review will take place every two years.

  13. Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions

    Science.gov (United States)

    Sirvin, Q.; Velay, V.; Bonnaire, R.; Penazzi, L.

    2017-10-01

    The Ti-6Al-4V titanium alloy is widely used for the manufacture of aeronautical and automotive parts (solid parts). In aeronautics, this alloy is employed for its excellent mechanical behavior associated with low density, outstanding corrosion resistance and good mechanical properties up to 600°C. It is especially used for the manufacture of fuselage frames, on the pylon for carrying out the primary structure (machining forged blocks) and the secondary structure in sheet form. In this last case, the sheet metal forming can be done through various methods: at room temperature by drawing operation, at very high temperature (≃900°C) by superplastic forming (SPF) and at intermediate temperature (≥750°C) by hot forming (HF). In order to reduce production costs and environmental troubles, the cycle times reduction associated with a decrease of temperature levels are relevant. This study focuses on the behavior modelling of Ti-6Al-4V alloy at temperatures above room temperature to obtained greater formability and below SPF condition to reduce tools workshop and energy costs. The displacement field measurement obtained by Digital Image Correlation (DIC) is based on innovative surface preparation pattern adapted to high temperature exposures. Different material parameters are identified to define a model able to predict the mechanical behavior of Ti-6Al-4V alloy under hot stamping conditions. The hardening plastic model identified is introduced in FEM to simulate an omega shape forming operation.

  14. A Fully Integrated Humidity Sensor System-on-Chip Fabricated by Micro-Stamping Technology

    Directory of Open Access Journals (Sweden)

    Chih-Ting Lin

    2012-08-01

    Full Text Available A fully integrated humidity sensor chip was designed, implemented, and tested. Utilizing the micro-stamping technology, the pseudo-3D sensor system-on-chip (SSoC architecture can be implemented by stacking sensing materials directly on the top of a CMOS-fabricated chip. The fabricated sensor system-on-chip (2.28 mm × 2.48 mm integrated a humidity sensor, an interface circuit, a digital controller, and an On-Off Keying (OOK wireless transceiver. With low power consumption, i.e., 750 μW without RF operation, the sensitivity of developed sensor chip was experimentally verified in the relative humidity (RH range from 32% to 60%. The response time of the chip was also experimentally verified to be within 5 seconds from RH 36% to RH 64%. As a consequence, the implemented humidity SSoC paves the way toward the an ultra-small sensor system for various applications.

  15. Hot stamping of AA6082 tailor welded blanks: experiment and FE simulation

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2016-01-01

    Full Text Available An advanced forming technology, solution Heat treatment, Forming and in-die Quenching (HFQ®, has been employed to form AA6082 tailor welded blanks (TWBs. In comparison with conventional stamping of TWBs, the mechanical properties and formability of AA6082 laser TWBs could be improved under the HFQ® forming condition. The TWB was divided into three physical zones, i.e. base metal, heat affected zone (HAZ and weld zone, based on the hardness distribution. It was found that the degraded hardness of the weldment can be restored after HFQ® forming. TWBs of AA6082 with different thickness ratios of 2 (2–1 mm, 1.3 (2–1.5 mm and 1 (1.5–1.5 mm were used to study the TWB thickness ratio effects on the forming behaviour. Hemispherical punch dome tests on the TWBs with varying thickness ratios demonstrated different formabilities, and indicated increased displacement of the weld line with increasing thickness ratio. Finite element (FE modelling was adopted to analyse the weld line movement and strain distributions during HFQ® forming.

  16. Forming and quenching behaviours in hot stamping of thin quenchable sheets

    Directory of Open Access Journals (Sweden)

    Nakagawa Yuki

    2015-01-01

    Full Text Available A thin aluminium-coated quenchable steel sheet was hot-stamped to investigate the effect of the thickness. The sheets having 0.6, 1.0 and 1.6 mm in thickness were heated at 900 ∘C by a furnace and formed after 7 s from the furnace. The cooling rates of 0.6 mm and 1.0 mm in thickness from 900 ∘C to 400 ∘C under air cooling were 20.9 ∘C/s and 13.6 ∘C/s, respectively. The hardness of the air-cooled sheets having 1.0 mm in thickness was 300 HV1, whereas that of the sheet having 0.6 mm in thickness was 380 HV1 because of the high cooling rate. The Vickers hardness of the U-bent sheets of 0.6 and 1.0 mm after 7 s from the furnace without the holding time at the bottom dead centre were 500 and 430 HV1, respectively.

  17. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  18. Effect of cooling rate during hot stamping on low cyclic fatigue of boron steel sheet

    Science.gov (United States)

    Suh, Chang Hee; Jang, Won Seok; Oh, Sang Kyun; Lee, Rac Gyu; Jung, Yun-Chul; Kim, Young Suk

    2012-08-01

    Boron steel is widely used throughout the automobile industry due to its high tensile strength and hardenability. When boron steel is used for body parts, only high strength is required for crashworthiness. However, when boron steel is used for chassis parts, a high fatigue life is needed. The microstructure of boron steel is mainly affected by the cooling rate during hot stamping. Therefore, this study investigated the low cyclic fatigue life according to the cooling rate. The fatigue life increased at a low strain amplitude when the cooling rate was fast. However, at a high strain amplitude, the fatigue life decreased, due to the low ductility and fracture toughness of the martensite formed by rapid cooling. Martensite formed by a fast cooling rate shows excellent fatigue life at a low total strain amplitude; however, a multiphase microstructure formed by a slow cooling rate is recommended if the parts experience high and low total strain amplitudes alternately. In addition, the cooling rate has little effect on the distribution of solute boron and boron precipitations, so it is expected that boron rarely affects low cyclic fatigue.

  19. Investigation of the Phase Formation of AlSi-Coatings for Hot Stamping of Boron Alloyed Steel

    Science.gov (United States)

    Veit, R.; Hofmann, H.; Kolleck, R.; Sikora, S.

    2011-01-01

    Hot stamping of boron alloyed steel is gaining more and more importance for the production of high strength automotive body parts. Within hot stamping of quenchenable steels the blank is heated up to austenitization temperature, transferred to the tool, formed rapidly and quenched in the cooled tool. To avoid scale formation during the heating process of the blank, the sheet metal can be coated with an aluminium-silicum alloy. The meltimg temperature of this coating is below the austenitization temperature of the base material. This means, that a diffusion process between base material and coating has to take place during heating, leading to a higher melting temperature of the coating. In conventional heating devices, like roller hearth furnaces, the diffusion process is reached by relatively low heating rates. New technologies, like induction heating, reach very high heating rates and offer great potentials for the application in hot stamping. Till now it is not proofed, that this technology can be used with aluminum-silicon coated materials. This paper will present the results of comparative heating tests with a conventional furnace and an induction heating device. For different time/temperature-conditions the phase formation within the coating will be described.

  20. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Science.gov (United States)

    Gonzaga, Fabiano Barbieri; Rocha, Werickson Fortunato de Carvalho; Correa, Deleon Nascimento

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny-Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples.

  1. Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction

    Science.gov (United States)

    Deng; Wu; Brittain; Whitesides

    2000-07-15

    This paper describes a practical method for the fabrication of photomasks, masters, and stamps/molds used in soft lithography that minimizes the need for specialized equipment. In this method, CAD files are first printed onto paper using an office printer with resolution of 600 dots/in. Photographic reduction of these printed patterns transfers the images onto 35-mm film or microfiche. These photographic films can be used, after development, as photomasks in 1:1 contact photolithography. With the resulting photoresist masters, it is straightforward to fabricate poly(dimethylsiloxane) (PDMS) stamps/molds for soft lithography. This process can generate microstructures as small as 15 microm; the overall time to go from CAD file to PDMS stamp is 4-24 h. Although access to equipment-spin coater and ultraviolet exposure tool-normally found in the clean room is still required, the cost of the photomask itself is small, and the time required to go from concept to device is short. A comparison between this method and all other methods that generate film-type photomasks has been performed using test patterns of lines, squares, and circles. Three microstructures have also been fabricated to demonstrate the utility of this method in practical applications.

  2. Facilitating participation

    DEFF Research Database (Denmark)

    Skøtt, Bo

    2018-01-01

    a part of contesting a public office. According to Schreiber and Elbeshausen, civil servants can react in different ways whenever their identities are up for discussion: 1. They can struggle to maintain a monopoly of knowledge and practice in an effort to protect the practice field, e.g. against outside...... theories, methods and knowledge. 2. They can adopt a laissez-faire approach and provide the public with what they want, whereby their relationship is commercialised. 3. They can engage in dialogues with the public to jointly negotiate what functions they are expected to perform (2005, pp. 15......–16). In Scandinavian public libraries, the latter has been the case. During recent decades, citizens have gained more possibilities than ever before to participate in co-creating activities regarding public libraries’ raison d’être. Thereby, they enter realms that were previously reserved for professional...

  3. Study of mechanical properties on powdermetalurgy aluminium matrix composites fabricated by stamping or extrusion; Estudio de las propiedades mecanicas en materiales compuestos de matriz aluminio pulvimetalurgicos conformados mediante forja o extrusion

    Energy Technology Data Exchange (ETDEWEB)

    Busquets, D.; Gomez, L.; Amigo, V.; Salvador-Moya, M. D.

    2005-07-01

    We have developed composite materials from AA6061 aluminium alloy powders used as matrix and ceramics powders of boron carbide, silicon carbide and boron nitride, used as reinforcements in 2.5, 5.0, 7.5 and 10% vol. by mechanical mixing and milling in planetary mill at 360 rpm vial velocity for 4 h followed of hot stamping and extrusion process on green compacts. Mechanical properties obtained from tensile tests are influenced by the heat treatment, reinforcement fractions and nature. Moreover, these mechanical characteristic are dependent from the processing route. Optical and Scanning Electron Microscopy analysis revealed the microstructure of materials and let describe the tripartite relation; structure-processing-properties, of the developed materials. (Author) 20 refs.

  4. Probing Protein Multidimensional Conformational Fluctuations by Single-Molecule Multiparameter Photon Stamping Spectroscopy

    Science.gov (United States)

    2015-01-01

    Conformational motions of proteins are highly dynamic and intrinsically complex. To capture the temporal and spatial complexity of conformational motions and further to understand their roles in protein functions, an attempt is made to probe multidimensional conformational dynamics of proteins besides the typical one-dimensional FRET coordinate or the projected conformational motions on the one-dimensional FRET coordinate. T4 lysozyme hinge-bending motions between two domains along α-helix have been probed by single-molecule FRET. Nevertheless, the domain motions of T4 lysozyme are rather complex involving multiple coupled nuclear coordinates and most likely contain motions besides hinge-bending. It is highly likely that the multiple dimensional protein conformational motions beyond the typical enzymatic hinged-bending motions have profound impact on overall enzymatic functions. In this report, we have developed a single-molecule multiparameter photon stamping spectroscopy integrating fluorescence anisotropy, FRET, and fluorescence lifetime. This spectroscopic approach enables simultaneous observations of both FRET-related site-to-site conformational dynamics and molecular rotational (or orientational) motions of individual Cy3-Cy5 labeled T4 lysozyme molecules. We have further observed wide-distributed rotational flexibility along orientation coordinates by recording fluorescence anisotropy and simultaneously identified multiple intermediate conformational states along FRET coordinate by monitoring time-dependent donor lifetime, presenting a whole picture of multidimensional conformational dynamics in the process of T4 lysozyme open-close hinge-bending enzymatic turnover motions under enzymatic reaction conditions. By analyzing the autocorrelation functions of both lifetime and anisotropy trajectories, we have also observed the dynamic and static inhomogeneity of T4 lysozyme multidimensional conformational fluctuation dynamics, providing a fundamental

  5. Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

    Science.gov (United States)

    Lin, Wenhu; Li, Fang; Wu, Dongsheng; Chen, Xiaoguan; Hua, Xueming; Pan, Hua

    2018-03-01

    22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

  6. Design and implementation of a nanosecond time-stamping readout system-on-chip for photo-detectors

    Energy Technology Data Exchange (ETDEWEB)

    Anvar, Shebli; Château, Frédéric; Le Provost, Hervé; Louis, Frédéric [CEA/Irfu/SEDI Gif-sur-Yvette (France); Manolopoulos, Konstantinos [Physics Department, University of Athens (Greece); Moudden, Yassir, E-mail: yassir.moudden@cea.fr [CEA/Irfu/SEDI Gif-sur-Yvette (France); Vallage, Bertrand [CEA/Irfu/SPP Gif-sur-Yvette (France); Zonca, Eric [CEA/Irfu/SEDI Gif-sur-Yvette (France)

    2014-01-21

    A readout system suitable for a large number of synchronized photo-detection units has been designed. Each unit embeds a specifically designed fully integrated communicating system based on Xilinx FPGA SoC technology. It runs the VxWorks real-time OS and a custom data acquisition software designed within the Ice middleware framework, resulting in a highly flexible, controllable and scalable distributed application. Clock distribution and delay calibration over customized fixed latency gigabit Ethernet links enable synchronous time-stamping of events with nanosecond precision. The implementation of this readout system on several data-collecting units as well as its performances are described.

  7. Wafer-scale patterning of reduced graphene oxide electrodes by transfer-and-reverse stamping for high performance OFETs.

    Science.gov (United States)

    Lee, Joong Suk; Kim, Nam Hee; Kang, Moon Sung; Yu, Hojeong; Lee, Dong Ryoul; Oh, Joon Hak; Chang, Suk Tai; Cho, Jeong Ho

    2013-08-26

    A wafer-scale patterning method for solution-processed graphene electrodes, named the transfer-and-reverse stamping method, is universally applicable for fabricating source/drain electrodes of n- and p-type organic field-effect transistors with excellent performance. The patterning method begins with transferring a highly uniform reduced graphene oxide thin film, which is pre-prepared on a glass substrate, onto hydrophobic silanized (rigid/flexible) substrates. Patterns of the as-prepared reduced graphene oxide films are then formed by modulating the surface energy of the films and selectively delaminating the films using an oxygen-plasma-treated elastomeric stamp with patterns. Reduced graphene oxide patterns with various sizes and shapes can be readily formed onto an entire wafer. Also, they can serve as the source/drain electrodes for benchmark n- and p-type organic field-effect transistors with enhanced performance, compared to those using conventional metal electrodes. These results demonstrate the general utility of this technique. Furthermore, this simple, inexpensive, and scalable electrode-patterning-technique leads to assembling organic complementary circuits onto a flexible substrate successfully. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Experimental study on the warm forming and quenching behavior for hot stamping of high-strength aluminum alloys

    Science.gov (United States)

    Degner, J.; Horn, A.; Merklein, M.

    2017-09-01

    Within the last decades, stringent regulations on fuel consumption, CO2 emissions and product recyclability forced the automotive sector to implement new strategies within the field of car body manufacturing. Due to their low density and good corrosion resistance, aluminum became one of the most relevant lightweight materials. Recently, especially high- strength aluminum alloys for structural components gained importance. Since the low formability of these alloys limits their application, there is a need for novel process strategies in order to enhance the forming behavior. One promising approach is the hot stamping of aluminum alloys. The combination of quenching and forming in one step after solution heat treatment leads to a significant improvement of the formability. Furthermore, higher manufacturing accuracy can be achieved due to reduced spring back. Within this contribution, the influence of forming temperature on the subsequent material behavior and the heat transfer during quenching will be analyzed. Therefore, the mechanical and thermal material characteristics such as flow behavior and heat transfer coefficient during hot stamping are investigated.

  9. Fracture Profile and Crack Propagation of Ultra-High Strength Hot-Stamped Boron Steel During Mechanical Trimming Process

    Science.gov (United States)

    Han, Xianhong; Yang, Kun; Chen, Sisi; Chen, Jun

    2015-10-01

    Mechanical trimming process for ultra-high strength boron steel after hot stamping was carried out in this study. Shear and tensile tests were designed to analyze the influences of stress state on the fracture mode; trimmed fracture surface and profile were observed and compared to other commonly used steels such as DP980 and Q235 etc.; the crack propagation during trimming process was studied through step-by-step tests. The observation and analysis reveal that the fracture mode of hot-stamped boron steel is highly related to the stress state, it belongs to cleavage fracture on low stress triaxiality but dimple fracture on high stress triaxiality. Such phenomenon is reflected in the trimming process, during which the stress state changes from shear-dominated state to tensile-dominated state. In addition, the burnish zone of trimmed boron steel is much smaller than other high strength steels, and the profile of cutting surface shows an `S'-like shape which is destructive to the trimming tool. Moreover, during the trimming process, most martensite laths near the cutting edge are stretched and rotated markedly to the direction of the shear band, and the main crack expands along those grain boundaries, which may penetrate through a few martensite laths and form small crack branches.

  10. Using Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges.

    Science.gov (United States)

    Han, Chi-Jui; Chiang, Hsuan-Ping; Cheng, Yun-Chien

    2018-02-18

    In this study, polydimethylsiloxane (PDMS) and conductive carbon nanoparticles were combined to fabricate a conductive elastomer PDMS (CPDMS). A high sensitive and flexible CPDMS strain sensor is fabricated by using stamping-process based micro patterning. Compared with conventional sensors, flexible strain sensors are more suitable for medical applications but are usually fabricated by photolithography, which suffers from a large number of steps and difficult mass production. Hence, we fabricated flexible strain sensors using a stamping-process with fewer processes than photolithography. The piezoresistive coefficient and sensitivity of the flexible strain sensor were improved by sensor pattern design and thickness change. Micro-patterning is used to fabricate various CPDMS microstructure patterns. The effect of gauge pattern was evaluated with ANSYS simulations. The piezoresistance of the strain gauges was measured and the gauge factor determined. Experimental results show that the piezoresistive coefficient of CPDMS is approximately linear. Gauge factor measurement results show that the gauge factor of a 140.0 μm thick strain gauge with five grids is the highest.

  11. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    Science.gov (United States)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-05-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  12. Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes

    International Nuclear Information System (INIS)

    Li, N.; Mohamed, M. S.; Cai, J.; Lin, J.; Balint, D.; Dean, T. A.

    2011-01-01

    Formability of steel and aluminium alloys in hot stamping and cold die quenching processes is studied in this research. Viscoplastic-damage constitutive equations are developed and determined from experimental data for the prediction of viscoplastic flow and ductility of the materials. The determined unified constitutive equations are then implemented into the commercial Finite Element code Abaqus/Explicit via a user defined subroutine, VUMAT. An FE process simulation model and numerical procedures are established for the modeling of hot stamping processes for a spherical part with a central hole. Different failure modes (failure takes place either near the central hole or in the mid span of the part) are obtained. To validate the simulation results, a test programme is developed, a test die set has been designed and manufactured, and tests have been carried out for the materials with different forming rates. It has been found that very close agreements between experimental and numerical process simulation results are obtained for the ranges of temperatures and forming rates carried out.

  13. Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming Process

    Science.gov (United States)

    Liu, Shichen; Lang, Lihui; Sherkatghanad, Ehsan; Wang, Yao; Xu, Wencai

    2018-04-01

    Glass-reinforced aluminum laminate (GLARE) is a new class of fiber metal laminates (FMLs) which has the advantages such as high tensile strength, outstanding fatigue, impact resistance, and excellent corrosion properties. GLARE has been extensively applied in advanced aerospace and automobile industries. However, the deformation behavior of the glass fiber during forming must be studied to the benefits of the good-quality part we form. In this research, we focus on the effect of fiber layer orientation on the GLARE laminate formability in stamp forming process. Experimental and numerical analysis of stamping a hemisphere part in different fiber orientation is investigated. The results indicate that unidirectional and multi-directional fiber in the middle layer make a significant effect on the thinning and also surface forming quality of the three layer sheet. Furthermore, the stress-strain distribution of the aluminum alloy and the unique anisotropic property of the fiber layer exhibit that fiber layer orientation can also affect the forming depths as well as the fracture modes of the laminate. According to the obtained results, it is revealed that multi-directional fiber layers are a good alternative compared to the unidirectional fibers especially when a better formability is the purpose.

  14. All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp

    DEFF Research Database (Denmark)

    Mikkelsen, Morten Bo Lindholm; Letailleur, Alban A; Søndergård, Elin

    2011-01-01

    We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination of the imprin......We present a simple and cheap method for fabrication of silica nanofluidic devices for single-molecule studies. By imprinting sol-gel materials with a multi-level stamp comprising micro- and nanofeatures, channels of different depth are produced in a single process step. Calcination...... of the imprinted hybrid sol-gel material produces purely inorganic silica, which has very low autofluorescence and can be fusion bonded to a glass lid. Compared to top-down processing of fused silica or silicon substrates, imprint of sol-gel silica enables fabrication of high-quality nanofluidic devices without...... expensive high-vacuum lithography and etching techniques. The applicability of the fabricated device for single-molecule studies is demonstrated by measuring the extension of DNA molecules of different lengths confined in the nanochannels....

  15. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Energy Technology Data Exchange (ETDEWEB)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C [CNRS, LAAS, 7 Avenue du Colonel Roche, F-31077 Toulouse Cedex 4 (France); Viallet, B; Ressier, L, E-mail: edague@laas.fr, E-mail: laurence.ressier@insa-toulouse.fr [Universite de Toulouse, LPCNO, INSA-CNRS-UPS, 135 Avenue de Rangueil, F-31077 Toulouse (France)

    2011-09-30

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  16. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    Science.gov (United States)

    Dague, E.; Jauvert, E.; Laplatine, L.; Viallet, B.; Thibault, C.; Ressier, L.

    2011-09-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  17. Assembly of live micro-organisms on microstructured PDMS stamps by convective/capillary deposition for AFM bio-experiments

    International Nuclear Information System (INIS)

    Dague, E; Jauvert, E; Laplatine, L; Thibault, C; Viallet, B; Ressier, L

    2011-01-01

    Immobilization of live micro-organisms on solid substrates is an important prerequisite for atomic force microscopy (AFM) bio-experiments. The method employed must immobilize the cells firmly enough to enable them to withstand the lateral friction forces exerted by the tip during scanning but without denaturing the cell interface. In this work, a generic method for the assembly of living cells on specific areas of substrates is proposed. It consists in assembling the living cells within the patterns of microstructured, functionalized poly-dimethylsiloxane (PDMS) stamps using convective/capillary deposition. This versatile approach is validated by applying it to two systems of foremost importance in biotechnology and medicine: Saccharomyces cerevisiae yeasts and Aspergillus fumigatus fungal spores. We show that this method allows multiplexing AFM nanomechanical measurements by force spectroscopy on S. cerevisiae yeasts and high-resolution AFM imaging of germinated Aspergillus conidia in buffer medium. These two examples clearly demonstrate the immense potential of micro-organism assembly on functionalized, microstructured PDMS stamps by convective/capillary deposition for performing rigorous AFM bio-experiments on living cells.

  18. Electronic Commerce

    Indian Academy of Sciences (India)

    Electronic commerce usually uses a public switched telephone network (PSTN) and is often between entities which are not known to one another. Ensuring security of communication between the entities participating in e-commerce is hence an important requirement. Apart from ensuring the security of messages on the ...

  19. Do Children in Rural Areas Still Have Different Access to Health Care? Results from a Statewide Survey of Oregon's Food Stamp Population

    Science.gov (United States)

    Devoe, Jennifer E.; Krois, Lisa; Stenger, Rob

    2009-01-01

    Purpose: To determine if rural residence is independently associated with different access to health care services for children eligible for public health insurance. Methods: We conducted a mail-return survey of 10,175 families randomly selected from Oregon's food stamp population (46% rural and 54% urban). With a response rate of 31%, we used a…

  20. Use of the Performance Diagnostic Checklist to Select an Intervention Designed to Increase the Offering of Promotional Stamps at Two Sites of a Restaurant Franchise

    Science.gov (United States)

    Rodriguez, Manuel; Wilder, David A.; Therrien, Kelly; Wine, Byron; Miranti, Reylissa; Daratany, Kenneth; Salume, Gloria; Baranovsky, Greg; Rodriquez, Matias

    2006-01-01

    The performance diagnostic checklist (PDC) was administered to examine the variables influencing the offering of promotional stamps by employees at two sites of a restaurant franchise. PDC results suggested that a lack of appropriate antecedents, equipment and processes, and consequences were responsible for the deficits. Based on these results,…

  1. The Confluence of Sociology, Statistics, and Public Policy in the Quality Control of the Food Stamps, AFDC, and Medicaid Family Assistance Programs.

    Science.gov (United States)

    Press, S. James; Tanur, Judith M.

    1991-01-01

    Relevance of the intersection of sociology, statistics, and public policy to the study of quality control in three family assistance programs--food stamps, Aid to Families with Dependent Children (AFDC), and Medicaid--is reviewed using a study by the National Academy of Sciences of methods for improving quality control systems. (SLD)

  2. The comparison of two continuum damage mechanics-based material models for formability prediction of AA6082 under hot stamping conditions

    Science.gov (United States)

    Shao, Z.; Li, N.; Lin, J.

    2017-09-01

    The hot stamping and cold die quenching process has experienced tremendous development in order to obtain shapes of structural components with great complexity in automotive applications. Prediction of the formability of a metal sheet is significant for practical applications of forming components in the automotive industry. Since microstructural evolution in an alloy at elevated temperature has a large effect on formability, continuum damage mechanics (CDM)-based material models can be used to characterise the behaviour of metals when a forming process is conducted at elevated temperatures. In this paper, two sets of unified multi-axial constitutive equations based on material’s stress states and strain states, respectively, were calibrated and used to effectively predict the thermo-mechanical response and forming limits of alloys under complex hot stamping conditions. In order to determine and calibrate the two material models, formability tests of AA6082 using a developed novel biaxial testing system were conducted at various temperatures and strain rates under hot stamping conditions. The determined unified constitutive equations from experimental data are presented in this paper. It is found that both of the stress-state based and strain-state based material models can predict the formability of AA6082 under hot stamping conditions.

  3. The usability of a WeChat-based electronic questionnaire for collecting participant-reported data in female pelvic floor disorders: a comparison with the traditional paper-administered format.

    Science.gov (United States)

    Sun, Zhi-Jing; Zhu, Lan; Liang, Maolian; Xu, Tao; Lang, Jing-He

    2016-08-01

    WeChat is a promising tool for capturing electronic data; however, no research has examined its use. This study evaluates the reliability and feasibility of WeChat for administering the Pelvic Floor Impact Questionnaire Short Form 7 questionnaire to women with pelvic floor disorders. Sixty-eight pelvic floor rehabilitation women were recruited between June and December 2015 and crossover randomized to two groups. All participants completed two questionnaire formats. One group completed the paper version followed by the WeChat version; the other group completed the questionnaires in reverse order. Two weeks later, each group completed the two versions in reverse order. The WeChat version's reliability was assessed using intraclass correlation coefficients and test-retest reliability. Forty-two women (61.8%) preferred the WeChat to the paper format, eight (11.8%) preferred the paper format, and 18 (26.5%) had no preference. The younger women preferred WeChat. Completion time was 116.5 (61.3) seconds for the WeChat version and 133.4 (107.0) seconds for the paper version, with no significant difference (P = 0.145). Age and education did not impact completion time (P > 0.05). Consistency between the WeChat and paper versions was excellent. The intraclass correlation coefficients of the Pelvic Floor Impact Questionnaire Short Form 7 and the three subscales ranged from 0.915 to 0.980. The Bland-Altman analysis and linear regression results also showed high consistency. The test-retest study had a Pearson's correlation coefficient of 0.908, demonstrating a strong correlation. WeChat-based questionnaires were well accepted by women with pelvic floor disorders and had good data quality and reliability.

  4. Stable Atlas-based Mapped Prior (STAMP) machine-learning segmentation for multicenter large-scale MRI data.

    Science.gov (United States)

    Kim, Eun Young; Magnotta, Vincent A; Liu, Dawei; Johnson, Hans J

    2014-09-01

    Machine learning (ML)-based segmentation methods are a common technique in the medical image processing field. In spite of numerous research groups that have investigated ML-based segmentation frameworks, there remains unanswered aspects of performance variability for the choice of two key components: ML algorithm and intensity normalization. This investigation reveals that the choice of those elements plays a major part in determining segmentation accuracy and generalizability. The approach we have used in this study aims to evaluate relative benefits of the two elements within a subcortical MRI segmentation framework. Experiments were conducted to contrast eight machine-learning algorithm configurations and 11 normalization strategies for our brain MR segmentation framework. For the intensity normalization, a Stable Atlas-based Mapped Prior (STAMP) was utilized to take better account of contrast along boundaries of structures. Comparing eight machine learning algorithms on down-sampled segmentation MR data, it was obvious that a significant improvement was obtained using ensemble-based ML algorithms (i.e., random forest) or ANN algorithms. Further investigation between these two algorithms also revealed that the random forest results provided exceptionally good agreement with manual delineations by experts. Additional experiments showed that the effect of STAMP-based intensity normalization also improved the robustness of segmentation for multicenter data sets. The constructed framework obtained good multicenter reliability and was successfully applied on a large multicenter MR data set (n>3000). Less than 10% of automated segmentations were recommended for minimal expert intervention. These results demonstrate the feasibility of using the ML-based segmentation tools for processing large amount of multicenter MR images. We demonstrated dramatically different result profiles in segmentation accuracy according to the choice of ML algorithm and intensity

  5. Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

    Science.gov (United States)

    Brittain, Harry G

    2016-01-01

    Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates. © The Author(s) 2015.

  6. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  7. Electronic Commerce

    Energy Technology Data Exchange (ETDEWEB)

    Laird, N. [NRG Information Services Inc., Calgary, AB (Canada)

    1995-11-01

    The concept of electronic commerce in the gas industry was discussed. It was defined as the integration of communication technology, advanced information processing capability and business standards, to improve effectiveness of the business process. Examples of electronic data interchange from the automotive, airline, and banking industry were given. The objective of using this technology in the gas industry was described as the provision of one electronic facility to make seamless contractual and operational arrangements for moving natural gas across participating pipelines. The benefit of seamless integration - one readily available standard system used by several companies - was highlighted. A list of value-added services such as the free movement of bulletins, directories, nominations,and other documents was provided.

  8. Pattern transfer printing by kinetic control of adhesion to an elastomeric stamp

    Science.gov (United States)

    Nuzzo, Ralph G [Champaign, IL; Rogers, John A [Champaign, IL; Menard, Etienne [Urbana, IL; Lee, Keon Jae [Tokyo, JP; Khang, Dahl-Young [Urbana, IL; Sun, Yugang [Champaign, IL; Meitl, Matthew [Champaign, IL; Zhu, Zhengtao [Urbana, IL

    2011-05-17

    The present invention provides methods, systems and system components for transferring, assembling and integrating features and arrays of features having selected nanosized and/or microsized physical dimensions, shapes and spatial orientations. Methods of the present invention utilize principles of `soft adhesion` to guide the transfer, assembly and/or integration of features, such as printable semiconductor elements or other components of electronic devices. Methods of the present invention are useful for transferring features from a donor substrate to the transfer surface of an elastomeric transfer device and, optionally, from the transfer surface of an elastomeric transfer device to the receiving surface of a receiving substrate. The present methods and systems provide highly efficient, registered transfer of features and arrays of features, such as printable semiconductor element, in a concerted manner that maintains the relative spatial orientations of transferred features.

  9. New organic photo-curable nanoimprint resist ≪mr-NIL210≫ for high volume fabrication applying soft PDMS-based stamps

    OpenAIRE

    Messerschmidt, Martin; Greer, Andrew; Schlachter, Florian; Barnett, Julian; Thesen, Manuel W.; Gadegaard, Nikolaj; Grutzner, Gabi; Schleunitz, Arne

    2017-01-01

    Herein, we report on a newly developed and commercialized organic photo-curable Nanoimprint Lithography (NIL) resist, namely mr-NIL210. Since this new NIL resist follows an innovative design concept and contains solely specific monomers with a characteristic chemistry and molecular design, an extended longevity of applied polydimethyl siloxane (PDMS) stamps is enabled addressing a crucial key metric for industrial high-volume manufacturing processes. Moreover, the mr-NIL210 is characterized b...

  10. Using the fibre structure of paper to determine authenticity of the documents: analysis of transmitted light images of stamps and banknotes.

    Science.gov (United States)

    Takalo, Jouni; Timonen, Jussi; Sampo, Jouni; Rantala, Maaria; Siltanen, Samuli; Lassas, Matti

    2014-11-01

    A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  11. Effect Analysis of Geometric Parameters on Stainless Steel Stamping Multistage Pump by Experimental Test and Numerical Calculation

    Directory of Open Access Journals (Sweden)

    Chuan Wang

    2013-01-01

    Full Text Available In order to improve the efficiency of stainless steel stamping multistage pump, quadratic regression orthogonal test, hydraulic design, and computational fluid dynamics (CFD are used to analyze the effect of pump geometric parameters. Sixteen impellers are designed based on the quadratic regression orthogonal test, which have three factors including impeller outlet slope, impeller blade outlet stagger angle, and impeller blade outlet width. Through quadratic regression equation, the function relationship between efficiency values and three factors is established. The optimal combination of geometric parameters is found through the analysis of the regression equation. To further study the influence of blade thickness on the performance of multistage pump, numerical simulations of multistage pump with different blade thicknesses are carried out. The influence law of blade thickness on pump performance is built from the external characteristics and internal flow field. In conclusion, with the increase of blade thickness, the best efficiency point of the pump shifts to the small flow rate direction, and the vortex regions inside the pump at rated flow gradually increase, which is the main reason that pump efficiency decreases along with the increase of the blade thickness at rated flow.

  12. ‘Postage-stamp PIV’: small velocity fields at 400 kHz for turbulence spectra measurements

    Science.gov (United States)

    Beresh, Steven J.; Henfling, John F.; Spillers, Russell W.; Spitzer, Seth M.

    2018-03-01

    Time-resolved particle image velocimetry recently has been demonstrated in high-speed flows using a pulse-burst laser at repetition rates reaching 50 kHz. Turbulent behavior can be measured at still higher frequencies if the field of view is greatly reduced and lower laser pulse energy is accepted. Current technology allows image acquisition at 400 kHz for sequences exceeding 4000 frames but for an array of only 128  ×  120 pixels, giving the moniker of ‘postage-stamp PIV’. The technique has been tested far downstream of a supersonic jet exhausting into a transonic crossflow. Two-component measurements appear valid until 120 kHz, at which point a noise floor emerges whose magnitude is dependent on the reduction of peak locking. Stereoscopic measurement offers three-component data for turbulent kinetic energy spectra, but exhibits a reduced signal bandwidth and higher noise in the out-of-plane component due to the oblique camera images. The resulting spectra reveal two regions exhibiting power-law dependence describing the turbulent decay. The frequency response of the present measurement configuration exceeds nearly all previous velocimetry measurements in high speed flow.

  13. Development of low-friction and wear-resistant surfaces for low-cost Al hot stamping tools

    Directory of Open Access Journals (Sweden)

    Dong Y.

    2015-01-01

    Full Text Available In this study, advanced surfaces and coatings have been developed using plasma thermochemical treatment, PVD coating, electroless Ni-BN plating and duplex surface engineering to produce low-friction and wear-resistant surfaces for cast iron stamping tools. Their microstructural and nano-mechanical properties were systematically analysed and the tribological behaviour of these new surfaces and coatings were evaluated. The experimental results have shown that under dry sliding condition, the tribological behaviour of aluminium differed great from that of steel regardless of the counterpart material. Highly reactive aluminium had a strong tendency to solder with tool surfaces during dry sliding. However, the lubricity of gray cast irons can be significantly improved by Ni-BN and DLC coatings. The coefficient of friction reduced from about 0.5 for untreated cast irons to about 0.2 sliding against aluminium. Duplex treatment combining plasma nitrocarburising with low-friction coatings showed superior durability than both DLC and Ni-BN coatings.

  14. ABC di corpi: alcuni alfabeti figurati del XVI secolo del Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna

    Directory of Open Access Journals (Sweden)

    Valeria Butera

    2013-10-01

    Full Text Available Fra le diverse tipologie di motivi ornamentali, gli alfabeti figurati costituiscono un vero e proprio genere a se stante, che attinge al repertorio iconografico del proprio tempo e lo riflette in composizioni dotate di grande fascino e originalità. Per la quantità, la qualità e l’eterogeneità degli esemplari custoditi, il Gabinetto Disegni e Stampe della Pinacoteca Nazionale di Bologna costituisce un caso più unico che raro in Italia, vantando alfabeti figurati che abbracciano ampi confini geografici e cronologici, spaziando dal tardo gotico al XIX secolo. Dopo una breve introduzione sulle vicende collezionistiche di un nucleo grafico così insolito e particolare, l’articolo si concentra su alcuni esemplari di alfabeti figurati del Cinquecento di area transalpina. Partendo dall’alfabeto dei bambini di Hans Weiditz (1521, costruito rispettando le più rigorose regole geometriche, codificate nei coevi trattati rinascimentali, ma anche riflesso del rinato gusto per i fregi all’antica con putti, si passa agli alfabeti di Peter Flötner (1534 e di Jost Amman (1567, dove le lettere sono integralmente costituite da corpi umani, forzati in complicate posture, talvolta persino licenziose. Questi esemplari rappresentano degli interessanti esperimenti calligrafici, dove l’uomo diviene concretamente l’unità di misura dei caratteri dell’alfabeto.

  15. Safety evaluation of stamp type digital microneedle devices in hairless mice.

    Science.gov (United States)

    Park, Kui Young; Jang, Woo Sun; Lim, Yun Young; Ahn, Joo Hee; Lee, Sang Jin; Kim, Chan Woong; Kim, Sung Eun; Kim, Beom Joon; Kim, Myeung Nam

    2013-02-01

    Microneedles provide a minimally invasive means to transport molecules into the skin. A number of specific strategies have been employed to use microneedles for transdermal delivery. The purpose of this study was to investigate the safety of two new digital microneedle devices (Digital Hand® and Digital Pro®; Bomtech Electronics Co., Ltd., Seoul, Korea) for the perforation of skin in skin-hairless-1 mice. This device replaces conventional needles and is designed specifically for intradermal delivery. We used two newly developed digital microneedle devices to perforate the skin of skin-hairless-1 mice. We conducted a comparative study of the two digital microneedle devices and DTS® (Disk type-microneedle Therapy System; DTS lab., Seoul, Korea). To evaluate skin stability, we performed visual and dermatoscopic inspections, measurements of transepidermal water loss, and biopsies. The two novel digital microneedle devices did not induce significant abnormalities of the skin on visual or dermatoscopic inspection, regardless of needle size (0.25~2.0 mm). No significant histopathological changes, such as inflammatory cell infiltration, desquamation of the stratum corneum, or disruption of the basal layer, were observed. The digital microneedle devices and microneedle therapy system produced similar results on measures of skin stability. These two novel digital microneedle devices are safe transdermal drug delivery systems.

  16. An investigation into the suitability of some etching reagents to restoring obliterated stamped numbers on cast iron engine blocks of cars.

    Science.gov (United States)

    Abdul Wahab, Mohd Farizon; Mohamad Ghani, Nurul Izwani; Kuppuswamy, R

    2012-11-30

    Most of the automotive companies use cast iron for their engine blocks. Restoration of obliterated number on these iron surfaces by chemical etching is known to be quite difficult. Heating of the obliterated surface using oxyacetylene flame is an alternative recovery treatment suggested in literature and used in practice. However chemical etching has been established to be the most sensitive technique for detection of metal deformation present under stamped serial numbers. Hence, the current work investigated the suitability of some common etchants on cast iron surfaces with a view to determining the most suitable one for revealing the obliterated marks. The reagents tested were mostly copper containing Fry's reagent and its modifications. Two cast iron engine blocks (3.29%C and 3.1%C) of two cars--a Proton Saga and a Toyota--were utilized for the experiments. The engine blocks were cut into several small plates and each plate was stamped with some numerical characters at 8 kN load using Instron Table Mounted Universal Testing Machine. The depth of stamping impression varied between 0.2 mm and 0.3 mm. The stamped number was completely ground off manually using a metal file. The grounded surface was then polished smooth using emery papers and etched with a few selected reagents mostly by swabbing. Experimental results showed that a modified Fry's composition consisting of 4 5g CuCl(2), 100 mL HCl, and 180 mL H(2)O restored the number with better contrast at a reasonably shorter time. The above reagent is a slightly modified form of one of the Fry's original compositions--45 g CuCl(2), 180 mL HCl, and 100 mL H(2)O. Quite importantly the proposed reagent restored the original stamped numbers of both Proton and Toyota cars and also a Mitsubishi car that had been obliterated. The most widely used Fry's composition (90 g CuCl(2), 120 mL HCl and 100 mL H(2)O), although recovered the obliterated number, did not cause the desired contrast. Copyright © 2012 Elsevier Ireland

  17. Combined electron beam and UV lithography in SU-8

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Morten; Thamdrup, Lasse Højlund; Mironov, Andrej

    2007-01-01

    We present combined electron beam and UV lithography (CEUL) in SU-8 as a fast and flexible lithographic technique for prototyping of functional polymer devices and pattern transfer applications. CEUL is a lithographic technique suitable for defining both micrometer and nanometer scale features...... in a single polymer film on the wafer scale. The height of the micrometer and nanometer scale features is matched within 30 nm. As a pattern transfer application, we demonstrate stamp fabrication and thermal nanoimprint of a 2-dimensional array of 100 nm wide lines with a pitch of 380 nm in connection...

  18. Worker participation - the Netherlands

    NARCIS (Netherlands)

    Kwantes, J.H.

    2014-01-01

    Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation

  19. Ultrafast electron transport across nano gaps in nanowire circuits

    Energy Technology Data Exchange (ETDEWEB)

    Potma, Eric O. [Univ. of California, Irvine, CA (United States)

    2015-07-31

    In this Program we aim for a closer look at electron transfer through single molecules. To achieve this, we use ultrafast laser pulses to time stamp an electron tunneling event in a molecule that is connected between two metallic electrodes, while reading out the electron current. A key aspect of this project is the use of metallic substrates with plasmonic activity to efficiently manipulate the tunneling probability. The first Phase of this program is concerned with developing highly sensitive tools for the ultrafast optical manipulation of tethered molecules through the evanescent surface field of plasmonic substrates. The second Phase of the program aims to use these tools for exercising control over the electron tunneling probability.

  20. A Mechanical, Microstructural, and Damage Study of Various Tailor Hot Stamped Material Conditions Consisting of Martensite, Bainite, Ferrite, and Pearlite

    Science.gov (United States)

    Bardelcik, Alexander; Vowles, Caryn J.; Worswick, Michael J.

    2018-02-01

    This paper examines the mechanical, microstructural, and damage characteristics of five different material conditions that were created using the tailored hot stamping process with in-die heating. The tailored material conditions, TMC1 to TMC5 (softest-hardest), were created using die temperatures ranging from 700 °C to 400 °C, respectively. The tensile strength (and total elongation) ranged from 615 MPa (0.24) for TMC1 to 1122 MPa (0.11) for TMC5. TMC3 and TMC4 exhibited intermediate strength levels, with almost no increase in total elongation relative to TMC5. FE-SEM microscopy was used to quantify the mixed-phase microstructures, which ranged in volume fractions of ferrite, pearlite, bainite, and martensite. High-resolution optical microscopy was used to quantify void accumulation and showed that the total void area fraction at 0.60 thickness strain was low for TMC1 and TMC5 ( 0.09 pct) and highest for TMC3 (0.31 pct). Damage modes were characterized and revealed that the poor damage behavior of TMC3 (martensite/bainite/ferrite composition) was a result of small martensitic grains forming at grain boundaries and grain boundary junctions, which facilitated void nucleation as shown by the highest measured void density for this particular material condition. The excellent ductility of TMC1 was a result of a large grained ferritic/pearlitic microstructure that was less susceptible to void nucleation and growth. Large titanium nitride (TiN) inclusions were observed in all of the tailored material conditions and it was shown that they noticeably contributed to the total void accumulation, specifically for the TMC3 and TMC4 material conditions.

  1. Optimization of the blankholder force distribution with application to the stamping of a car front door panel (Numisheet'99)

    International Nuclear Information System (INIS)

    Ayed, L. Ben; Delameziere, A.; Batoz, J.L.; Knopf-Lenoir, C.

    2005-01-01

    New materials such as dual phase steel or aluminium and complex geometries of industrial parts increase the difficulties to obtain a defect free part by stamping. One way of solution is a better regulation of the blankholder pressures. Our work is based on an original idea of Siegert, Haeussermann and Haller. The goal is to control the movement of the blank under the blankholder. Thanks to a deformable flexible blankholder, it is possible to create some independent zones. In each zone, a blankholder force can be applied on the sheet, so that a strong force can hold the blank in a zone, and a smaller one can let it move in another zone. The methodology is presented as well as some results dealing with the optimization of the blankholder force considering the drawing of a front door panel (Numisheet'99 benchmark test). The numerical simulations are performed using ABAQUS Explicit. The parameters of the finite element model (mesh density, speed of punch) are set to achieve a good prediction with a minimum simulation time. The objective function is defined to minimize the work of the punch. Three inequality constraints functions were defined to avoid necking and wrinkling. To avoid necking, the major stress of the blank is limited to a value, which is determined by using the modified maximum force criterion (MMFC). To avoid wrinkling, under the blankholder, the angle between the blankholder surface and an element of the blank is limited to a value set by the user, as proposed by Gelin and Labergere. However, in the useful part of the workpiece, the major stress is limited to a value, which was proposed by Brunet, Batoz and Bouabdallah. For the localization of the optimum, we use a response surface method computed with a diffuse approximation and coupled with an adaptative strategy to update the research space

  2. Optimization of the blankholder force distribution with application to the stamping of a car front door panel (Numisheet'99)

    Science.gov (United States)

    Ayed, L. Ben; Delamézière, A.; Batoz, J. L.; Knopf-Lenoir, C.

    2005-08-01

    New materials such as dual phase steel or aluminium and complex geometries of industrial parts increase the difficulties to obtain a defect free part by stamping. One way of solution is a better regulation of the blankholder pressures. Our work is based on an original idea of Siegert, Häussermann and Haller. The goal is to control the movement of the blank under the blankholder. Thanks to a deformable flexible blankholder, it is possible to create some independent zones. In each zone, a blankholder force can be applied on the sheet, so that a strong force can hold the blank in a zone, and a smaller one can let it move in another zone. The methodology is presented as well as some results dealing with the optimization of the blankholder force considering the drawing of a front door panel (Numisheet'99 benchmark test). The numerical simulations are performed using ABAQUS Explicit. The parameters of the finite element model (mesh density, speed of punch) are set to achieve a good prediction with a minimum simulation time. The objective function is defined to minimize the work of the punch. Three inequality constraints functions were defined to avoid necking and wrinkling. To avoid necking, the major stress of the blank is limited to a value, which is determined by using the modified maximum force criterion (MMFC). To avoid wrinkling, under the blankholder, the angle between the blankholder surface and an element of the blank is limited to a value set by the user, as proposed by Gelin and Labergere. However, in the useful part of the workpiece, the major stress is limited to a value, which was proposed by Brunet, Batoz and Bouabdallah. For the localization of the optimum, we use a response surface method computed with a diffuse approximation and coupled with an adaptative strategy to update the research space.

  3. StaMPS Improvement for Deformation Analysis in Mountainous Regions: Implications for the Damavand Volcano and Mosha Fault in Alborz

    Directory of Open Access Journals (Sweden)

    Sanaz Vajedian

    2015-06-01

    Full Text Available Interferometric Synthetic Aperture Radar (InSAR capability to detect slow deformation over terrain areas is limited by temporal decorrelation, geometric decorrelation and atmospheric artefacts. Multitemporal InSAR methods such as Persistent Scatterer (PS-InSAR and Small Baseline Subset (SBAS have been developed to deal with various aspects of decorrelation and atmospheric problems affecting InSAR observations. Nevertheless, the applicability of both PS-InSAR and SBAS in mountainous regions is still challenging. Correct phase unwrapping in both methods is hampered due to geometric decorrelation in particular when using C-band SAR data for deformation analysis. In this paper, we build upon the SBAS method implemented in StaMPS software and improved the technique, here called ISBAS, to assess tectonic and volcanic deformation in the center of the Alborz Mountains in Iran using both Envisat and ALOS SAR data. We modify several aspects within the chain of the processing including: filtering prior to phase unwrapping, topographic correction within three-dimensional phase unwrapping, reducing the atmospheric noise with the help of additional GPS data, and removing the ramp caused by ionosphere turbulence and/or orbit errors to better estimate crustal deformation in this tectonically active region. Topographic correction is done within the three-dimensional unwrapping in order to improve the phase unwrapping process, which is in contrast to previous methods in which DEM error is estimated before/after phase unwrapping. Our experiments show that our improved SBAS approach is able to better characterize the tectonic and volcanic deformation in the center of the Alborz region than the classical SBAS. In particular, Damavand volcano shows an average uplift rate of about 3 mm/year in the year 2003–2010. The Mosha fault illustrates left-lateral motion that could be explained with a fault that is locked up to 17–18 km depths and slips with 2–4 mm

  4. A Mechanical, Microstructural, and Damage Study of Various Tailor Hot Stamped Material Conditions Consisting of Martensite, Bainite, Ferrite, and Pearlite

    Science.gov (United States)

    Bardelcik, Alexander; Vowles, Caryn J.; Worswick, Michael J.

    2018-04-01

    This paper examines the mechanical, microstructural, and damage characteristics of five different material conditions that were created using the tailored hot stamping process with in-die heating. The tailored material conditions, TMC1 to TMC5 (softest-hardest), were created using die temperatures ranging from 700 °C to 400 °C, respectively. The tensile strength (and total elongation) ranged from 615 MPa (0.24) for TMC1 to 1122 MPa (0.11) for TMC5. TMC3 and TMC4 exhibited intermediate strength levels, with almost no increase in total elongation relative to TMC5. FE-SEM microscopy was used to quantify the mixed-phase microstructures, which ranged in volume fractions of ferrite, pearlite, bainite, and martensite. High-resolution optical microscopy was used to quantify void accumulation and showed that the total void area fraction at 0.60 thickness strain was low for TMC1 and TMC5 ( 0.09 pct) and highest for TMC3 (0.31 pct). Damage modes were characterized and revealed that the poor damage behavior of TMC3 (martensite/bainite/ferrite composition) was a result of small martensitic grains forming at grain boundaries and grain boundary junctions, which facilitated void nucleation as shown by the highest measured void density for this particular material condition. The excellent ductility of TMC1 was a result of a large grained ferritic/pearlitic microstructure that was less susceptible to void nucleation and growth. Large titanium nitride (TiN) inclusions were observed in all of the tailored material conditions and it was shown that they noticeably contributed to the total void accumulation, specifically for the TMC3 and TMC4 material conditions.

  5. Single-molecule interfacial electron transfer dynamics of porphyrin on TiO2 nanoparticles: dissecting the interfacial electric field and electron accepting state density dependent dynamics.

    Science.gov (United States)

    Rao, Vishal Govind; Dhital, Bharat; Lu, H Peter

    2015-12-07

    Single-molecule photon-stamping spectroscopy correlated with electrochemical techniques was used to dissect complex interfacial electron transfer (ET) dynamics by probing an m-ZnTCPP molecule anchored to a TiO2 NP surface while electrochemically controlling the energetically-accessible surface states of TiO2 NPs. Application of negative potential increases the electron density in TiO2 NPs, resulting in hindered forward ET and enhanced backward ET due to the changes in the interfacial electric field and the occupancy of acceptor states.

  6. Speaking of Participation

    Directory of Open Access Journals (Sweden)

    Michael S. Evans

    2014-12-01

    Full Text Available While participation in public life is generally agreed to be important for governance and citizenship, scholars focused on talk-oriented participation (in the Tocquevillian tradition suggest that there is a participation deficit in the American public sphere. Qualitative analysis of responses from 60 interview respondents about whether or not they are participants in four prominent American debates suggests a novel explanation for this apparent deficit: Persons whom analysts classify as non-participants may believe that they are already participating, because their understanding of participation is not based on public political talk. Moreover, individual responses about participation vary substantially by debate, suggesting that what counts as participation is more fluid for respondents than for analysts. Implications for public sphere studies are discussed.

  7. User participation in implementation

    DEFF Research Database (Denmark)

    Fleron, Benedicte; Rasmussen, Rasmus; Simonsen, Jesper

    2012-01-01

    experienced more uncertainty and frustration than management and non-participating staff, especially concerning how to run an implementation process and how to understand and utilize the configuration possibilities of the system. This suggests that user participation in implementation introduces a need......Systems development has been claimed to benefit from user participation, yet user participation in implementation activities may be more common and is a growing focus of participatory-design work. We investigate the effect of the extensive user participation in the implementation of a clinical...... system by empirically analyzing how management, participating staff, and non-participating staff view the implementation process with respect to areas that have previously been linked to user participation such as system quality, emergent interactions, and psychological buy-in. The participating staff...

  8. Labor Force Participation Rate

    Data.gov (United States)

    City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...

  9. Widening Participation: What Works?

    Science.gov (United States)

    Gorard, Stephen

    2007-01-01

    In this brief article, the author talks about what--other than money--works to widen higher education (HE) participation for adult learners. He also discusses the problems in trying to discover what works to widen participation for adults. One problem is that the decision to participate in any formal learning episode, including HE, is not a simple…

  10. Displacement Through Participation

    NARCIS (Netherlands)

    Huisman, Carla

    Citizen participation is often regarded as a means to increase local democracy. Seldom is participation viewed as a means to legitimate disruptive practices of states. However, participation can become a tool for the effective implementation of policy rather than a means to enhance justice, if no

  11. Participation in adult learning

    DEFF Research Database (Denmark)

    Desjardins, Richard

    2010-01-01

    This entry presents an internationally comparative overview of adult learning patterns. Emphasis is placed on who is participating in adult learning and the observed unequal chances to participate. The entry covers three overarching questions that are central to participation research: a) What...

  12. Evaluation of the Possibility of Performing Cold Backward Extrusion of Axisymmetrical Thinwalled Aluminum Die Stampings with Square Section / Ocena Możliwości Wyciskania Przeciwbieżnego Na Zimno Osiowosymetrycznych Wyprasek Z Cienką Ścianką O Przekroju Kwadratowym Z Aluminium

    OpenAIRE

    Miłek T.; Kowalik B.; Kuliński B.

    2015-01-01

    The paper presents evaluation of the possibility of performing cold backward extrusion of axisymmetrical thin-walled aluminum (Al 99.50, ENAW-1050A) die stampings with a square section at the strain ε=ln(A0/A1)=2 (where A0 - cross sectional area of the billet, A1 - cross sectional area of the die stamping), and the ratio h1/b=3.6 (where h1 - height of the die stamping in mm, b - width of the base of the die stamping in mm). The analysis was conducted on the basis of the results of computer mo...

  13. Electronic Cigarettes

    Science.gov (United States)

    ... New FDA Regulations Text Size: A A A Electronic Cigarettes Electronic cigarettes (e-cigarettes) are battery operated products designed to ... more about: The latest news and events about electronic cigarettes on this FDA page Electronic cigarette basics on ...

  14. Observing participating observation

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2010-01-01

    Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming a partici......Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....

  15. Observing participating observation

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2011-01-01

    Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming a partici......Current methodology concerning participating observation in general leaves the act of observation unobserved. Approaching participating observation from systems theory offers fundamental new insights into the topic. Observation is always participation. There is no way to escape becoming...... as the idea of the naïve observer becomes a void. Not recognizing and observing oneself as observer and co-producer of empirical data simply leaves the process of observation as the major unobserved absorber of contingency in data production based on participating observation....

  16. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  17. The Electron

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, George

    1972-01-01

    Electrons are elementary particles of atoms that revolve around and outside the nucleus and have a negative charge. This booklet discusses how electrons relate to electricity, some applications of electrons, electrons as waves, electrons in atoms and solids, the electron microscope, among other things.

  18. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  19. Connecting Participant Observation Positions

    DEFF Research Database (Denmark)

    McCurdy, Patrick; Uldam, Julie

    2014-01-01

    In this article, we argue for the importance of considering participant observation roles in relation to both insider/outsider and overt/covert roles. Through combining key academic debates on participant observation, which have separately considered insider/outsider and overt/covert participant ...... the course of fieldwork and considering the implications of this. To illustrate these dynamics, we draw on two examples from our own ethnographic research experiences in direct action anticapitalist movements....

  20. Public Participation Plan

    International Nuclear Information System (INIS)

    1993-07-01

    The purpose of this Public Participation Plan is to describe the US Department of Energy's (DOE) plan for involving the public in the decision-making process for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The plan describes how the DOE will meet the public participation requirements of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, as amended, and of the National Environmental Policy Act (NEPA) of 1969. It includes the UMTRA Project Office plans for complying with DOE Order 5440.1D and for implementing the DOE's Public Participation Policy for Environmental Restoration and Waste Management (1992) and Public Participation Guidance for Environmental Restoration and Waste Management (1993)

  1. Electron radiography

    Science.gov (United States)

    Merrill, Frank E.; Morris, Christopher

    2005-05-17

    A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

  2. Experimental search of the electroweak symmetry breaking in the H→γγ channel and of a solution to the hierarchy problem in ATLAS. Participation to the preparation of the electronics of the electromagnetic calorimeter

    International Nuclear Information System (INIS)

    Escalier, Marc

    2005-01-01

    This thesis deals with the understanding of the spontaneous electroweak symmetry breaking mechanism in the ATLAS experiment at LHC collider, by studying two complementary topics: the search for the Higgs boson in the H→γγ channel, and a search for extra dimensions in the gluon sector. Tests of the electronic of the electromagnetic calorimeter allowed to validate various cards that were under the responsibility of the LPNHE. Using full simulation data of the detector allowed us to precisely compute mass resolution of the di-photon system. Due to recent theoretical improvements, signal and background have been studied at the next order of the perturbative development, which increases cross-sections. With regards to the jet background, a study has been done using discriminating variables in order to obtain, for a 80 % photons efficiency, a rejection factor of 7000. The discovery potential benefits from this change of cross-sections and increases by 50 % in comparison with the same analysis done at the leading order. In addition to this, a new analysis using a maximum likelihood method allowed us to increase by 40 % the discovery potential in comparison with our classical analysis. In conclusion, the Higgs boson of 120 GeV/c 2 can be now discovered in this channel with an integrated luminosity of 10 fb -1 . Furthermore, naturality problem of the Higgs boson mass can be solved by introducing extra dimensions in which gluons can propagate. We have shown that it was possible to discover extra-dimensions up to a compactification scale of 15 TeV. (author)

  3. Experiment search of the electroweak symmetry breaking in the H → γγ channel and of a solution of the hierarchy problem in the Atlas experiment: participation to the tests of the electronics of the electromagnetic calorimeter

    International Nuclear Information System (INIS)

    Escalier, M.

    2005-04-01

    This thesis deals with the understanding of the spontaneous electroweak symmetry breaking mechanism in the ATLAS experiment at LHC collider, by studying two complementary topics: the search for the Higgs boson in the H → γγ channel, and a search for extra dimensions in the gluon sector. Tests of the electronic of the electromagnetic calorimeter allowed us to validate various cards that were under the responsibility of the LPNHE. Using full simulation data of the detector allowed us to precisely compute mass resolution of the di-photon system. Due to recent theoretical improvements, signal and background have been studied at the next order of the perturbative development, which increases cross-sections. With regards to the jet background, a study has been done using discriminating variables in order to obtain, for a 80 % photons efficiency, a rejection factor of 7000. The discovery potential benefits from this change of cross-sections and increases by 50 % in comparison with the same analysis done at the leading order. In addition to this, a new analysis using a maximum likelihood method allowed us to increase by 40 % the discovery potential in comparison with our classical analysis. In conclusion, the Higgs boson of 120 GeV/c 2 can be now discovered in this channel with an integrated luminosity of 10 fb -1 . Furthermore, the consistency of the problem of the Higgs boson mass can be solved by introducing extra dimensions in which gluons can propagate. We have shown that it was possible to discover extra-dimensions up to a compactification scale of 15 TeV. (author)

  4. [Inequities in access to food stamps and meal vouchers in Brazil: an analysis of the Brazilian Household Budgets Survey, 2008-2009].

    Science.gov (United States)

    Canella, Daniela Silva; Martins, Ana Paula Bortoletto; Bandoni, Daniel Henrique

    2016-03-01

    Food stamps and meal vouchers can determine workers' dietary choices. The study aimed to assess the coverage of these benefits in Brazil and their distribution according to the beneficiaries' socio-demographic and regional characteristics, using data from the Brazilian Household Budgets Survey, 2008-2009. Eligibility criteria were having an occupation and a private or government job, including domestic or temporary work in rural areas. Only 3.2% of eligible individuals reported receiving such benefits. Highest coverage rates were verified with the Southeast region, urban areas, male gender, employment in the private sector, and monthly earnings > five times the minimum wage. The mean monthly amount of such benefits was R$ 177.20 (US$ 100 at the 2009 exchange rate). After adjusting for other variables, the highest amounts were associated with male gender, higher salaries, the Northeast and Central regions, and employment in the public sector. This first analysis of the national coverage of food stamps and meal vouchers showed that a large share of Brazilian workers lack access or have unequal access to such benefits.

  5. Research on optimization design of conformal cooling channels in hot stamping tool based on response surface methodology and multi-objective optimization

    Directory of Open Access Journals (Sweden)

    He Bin

    2016-01-01

    Full Text Available In order to optimize the layout of the conformal cooling channels in hot stamping tools, a response surface methodology and multi-objective optimization technique are proposed. By means of an Optimal Latin Hypercube experimental design method, a design matrix with 17 factors and 50 levels is generated. Three kinds of design variables, the radius Rad of the cooling channel, the distance H from the channel center to tool work surface and the ratio rat of each channel center, are optimized to determine the layout of cooling channels. The average temperature and temperature deviation of work surface are used to evaluate the cooling performance of hot stamping tools. On the basis of the experimental design results, quadratic response surface models are established to describe the relationship between the design variables and the evaluation objectives. The error analysis is performed to ensure the accuracy of response surface models. Then the layout of the conformal cooling channels is optimized in accordance with a multi-objective optimization method to find the Pareto optimal frontier which consists of some optimal combinations of design variables that can lead to an acceptable cooling performance.

  6. Impact of Si on Microstructure and Mechanical Properties of 22MnB5 Hot Stamping Steel Treated by Quenching & Partitioning (Q&P)

    Science.gov (United States)

    Linke, Bernd M.; Gerber, Thomas; Hatscher, Ansgar; Salvatori, Ilaria; Aranguren, Iñigo; Arribas, Maribel

    2018-01-01

    Based on 22MnB5 hot stamping steel, three model alloys containing 0.5, 0.8, and 1.5 wt pct Si were produced, heat treated by quenching and partitioning (Q&P), and characterized. Aided by DICTRA calculations, the thermal Q&P cycles were designed to fit into industrial hot stamping by keeping partitioning times ≤ 30 seconds. As expected, Si increased the amount of retained austenite (RA) stabilized after final cooling. However, for the intermediate Si alloy the heat treatment exerted a particularly pronounced influence with an RA content three times as high for the one-step process compared to the two-step process. It appeared that 0.8 wt pct Si sufficed to suppress direct cementite formation from within martensite laths but did not sufficiently stabilize carbon-soaked RA at higher temperatures. Tensile and bending tests showed strongly diverging effects of austenite on ductility. Total elongation improved consistently with increasing RA content independently from its carbon content. In contrast, the bending angle was not impacted by high-carbon RA but deteriorated almost linearly with the amount of low-carbon RA.

  7. Participation beyond observation

    DEFF Research Database (Denmark)

    Chimirri, Niklas Alexander

    , however, the researchers typically uphold the notion that all they methodically engage in is participant observation. The paper argues that important aspects of children’s living and understanding may be lost when considering them mere objects of one’s visual and verbal research practices. First I delve...... on investigating children’s perspectives through participant observation, but also ontological and political ones....

  8. Contact Quality in Participation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Jensen, Olav Storm

    2016-01-01

    We investigate the concept of participation from the perspective of quality of the contact in the communicative interactions between participants. We argue for the need for an academic-personal competence that qualifies the human contact central in all Participatory Design (PD) activities as a wa...

  9. The body participating:

    DEFF Research Database (Denmark)

    Pallesen, Hanne; Lund, Lone Blak; Jensen, Marianne

    2017-01-01

    ABSTRACT Background: The literature on participation in rehabilitation by those with the most severe acquired brain injury is very sparse. Objectives: The aim of this study was to explore how physiotherapists promote the participation of patients with severe brain injury in therapeutic and daily-...

  10. Extent of local participation

    International Nuclear Information System (INIS)

    Albisu, F.

    1977-01-01

    After a brief historical comment on national participation on past nuclear projects, a description is made of the desirable situation to be achieved as regards local content. The reasons, the procedures and the areas for that participation (i.e., the why, how and where) are suggested, as well as the means to promote it. (orig.) [de

  11. List of Participants

    Indian Academy of Sciences (India)

    List of Participants. Participants from Bhabha Atomic Research Centre, Mumbai, India. Agarwalla S K, BARC, Mumbai. Bapna R C, BARC, Mumbai. Batra Jigyasa, BARC, Mumbai. Baruah S, BARC, Mumbai. Behera Rita, BARC, Mumbai. Bhandari S, BARC, Mumbai. Bhatnagar K S, BARC, Mumbai. Bhowmick G K, BARC ...

  12. Children's participation in research

    DEFF Research Database (Denmark)

    Broström professor m.so., Stig

    2012-01-01

    In (post) modern society children are seen as active subjects and participants who have a legitimate basis in the United Nations Convention of the Rights of the Child. As a consequence of this, children are able to play an active role in the 10 planning of/and participation in both education...

  13. Sense of participation

    NARCIS (Netherlands)

    Bohorques Montemayor, L.; Nevejan, C.I.M.; Brazier, F.M.

    2013-01-01

    This paper explores the sense of participation of a spatially distributed individual—in the intersections of physical and mediated networks. This sense is fundamental to an individuals’ experience as a participant in systems designed to this purpose including today’s social media and new media

  14. Depression and Political Participation*

    Science.gov (United States)

    Ojeda, Christopher

    2015-01-01

    In this paper, I propose that depression is a political phenomenon insofar as it has political sources and consequences. I then investigate one aspect of this argument—whether depression reduces participation. I hypothesize that individuals with depression lack the motivation and physical capacity to vote and engage in other forms of political participation due to somatic problems and feelings of hopelessness and apathy. Moreover, I examine how depression in adolescence can have downstream consequences for participation in young adulthood. The analyses, using both cross-sectional and longitudinal data, show that voter turnout and other forms of participation decrease as the severity of depressed mood increases. These findings are discussed in light of disability rights and potential efforts to boost participation among this group. PMID:26924857

  15. The participating researcher

    DEFF Research Database (Denmark)

    Hansen, Louise Ejgod

    2014-01-01

    will tentatively be presented as the basis of a model for participating research as an alternative approach to evaluation of cultural processes. Addressing this question is central for my current engagement in the evaluation of Aarhus as European Capital of Culture in 2017. This evaluation has the ambition......My paper will focus on the self-reflection of my role as participating researcher in three different art projects all of which have participation as a key element. The paper will begin with a presentation of the three cases: Theatre Talks (Teatersamtaler), Stepping Stones (Trædesten) and Art...... on the fringe (Kunsten ude på kanten). Each focus on participation in different ways: Theatre Talks focus in the participating of new audiences in theatres attending and talking about their experience with each other. Stepping Stone is a project addressing the involvement of children and youth as creative...

  16. Participative Knowledge Production of Learning Objects for E-Books.

    Science.gov (United States)

    Dodero, Juan Manuel; Aedo, Ignacio; Diaz, Paloma

    2002-01-01

    Defines a learning object as any digital resource that can be reused to support learning and thus considers electronic books as learning objects. Highlights include knowledge management; participative knowledge production, i.e. authoring electronic books by a distributed group of authors; participative knowledge production architecture; and…

  17. Synthesis of non-ionic and ionic resins for BEP intaglio inks curing by electron-beam radiation. Annual report

    International Nuclear Information System (INIS)

    Bauer, B.J.; Dickens, B.

    1992-01-01

    The inks currently used to print US postage stamps on web presses are dried by heat evaporation of solvents. Emission of solvents into the atmosphere is governed by Local and Federal Government Regulations. Reduction of these emissions to acceptable levels can be accomplished by either of two methods available to the BEP. The work was part of a continuing effort to produce resins for use in formulation of intaglio inks for the printing of postage stamps and security documents. The inks are to be cured by exposure to an electron beam. The uncured inks are cleaned from the roller and wiping blade by washing the wiping blade with neutral water or with caustic water. Laboratory scale work on the urethane/polyethylene oxide/methacrylate resins has now been concluded and information on the synthesis has been provided to BEP for patenting and scaleup. Some effort on nonionic resins continued into FY88

  18. Mapping eParticipation

    DEFF Research Database (Denmark)

    Rose, Jeremy; Sanford, Clive Carlton

    2007-01-01

    The emerging research area of eParticipation can be characterized as the study of technology-facilitated citizen participation in (democratic) deliberation and decision-making. Using conventional literature study techniques, we identify 105 articles that are considered to be highly relevant to e......Participation. We develop a definitional schema that suggests different ways of understanding an emerging socio-technical research area and use this schema to map the research contributions identified. This allows us make an initial sketch of the scientific character of the area and its central concerns, theories...

  19. Limited Denial of Participation

    Data.gov (United States)

    Department of Housing and Urban Development — A Limited Denial of Participation (LDP) is an action taken by a HUD Field Office or the Deputy Assistant Secretary for Single Family (DASSF) or Multifamily (DASMF)...

  20. What affects women's participation?

    International Development Research Centre (IDRC) Digital Library (Canada)

    Karen Kershaw

    What affects women's participation? Variables. Men. Women. Presence. Caste, Age. Education. Political Experience. Attendance in Training. Region, Caste. Religion, Age. Number of Children. Political Experience. Attendance in training. Influence. Region, Education. Type of Family. Party Membership. Political Experience.

  1. Size and Political Participation

    DEFF Research Database (Denmark)

    Lassen, David Dreyer; Serritzlew, Søren

    This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size.......This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size....

  2. Characterizing eParticipation

    DEFF Research Database (Denmark)

    Sanford, Clive Carlton; Rose, Jeremy

    2007-01-01

    that are considered to be highly relevant to eParticipation. We develop a definitional schema that suggests different ways of understanding an emerging research area, and use this schema to identify key academic articles that help to define eParticipation. We adapt Deetz's [(1996). Describing differences...... picture which will help future researchers both to understand and to navigate the research area. Udgivelsesdato: DEC...

  3. 18 CFR 50.4 - Stakeholder participation.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Stakeholder participation. 50.4 Section 50.4 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... county throughout the project area, either in paper or electronic format; and (ii) Complete copies of all...

  4. Ultrashort laser pulse driven inverse free electron laser accelerator experiment

    Directory of Open Access Journals (Sweden)

    J. T. Moody

    2016-02-01

    Full Text Available In this paper we discuss the ultrashort pulse high gradient inverse free electron laser accelerator experiment carried out at the Lawrence Livermore National Laboratory which demonstrated gradients exceeding 200  MV/m using a 4 TW 100 fs long 800 nm Ti:Sa laser pulse. Due to the short laser and electron pulse lengths, synchronization was determined to be one of the main challenges in this experiment. This made necessary the implementation of a single-shot, nondestructive, electro-optic sampling based diagnostics to enable time-stamping of each laser accelerator shot with <100  fs accuracy. The results of this experiment are expected to pave the way towards the development of future GeV-class IFEL accelerators.

  5. European Patterns of Participation

    DEFF Research Database (Denmark)

    Harrebye, Silas Fehmerling; Ejrnæs, Anders

    2015-01-01

    Social Survey (ESS) Round 4 (2008), the article finds that satisfaction/dissatisfaction with the government is an important predictor alongside the institutional macro-level variable. The article combines a critical tradition, which suggests that political participation is motivated by a feeling...... of dissatisfaction with the government and feelings of being member of a discriminated group affect the level of extra-parliamentary participation, and second, how different welfare regimes condition the extend to which these groups chose to act. In a comparative multilevel design, using data from the European...... of dissatisfaction with an institutional perspective in which certain institutional conditions are seen as enablers for citizens to actively participate in political life. Our results show that the overall level of extra-parliamentary activity in the Scandinavian countries is higher than in the other European...

  6. Children's participation in Teledialogue

    DEFF Research Database (Denmark)

    Andersen, Lars Bo; Lauritsen, Peter; Danholt, Peter

    2014-01-01

    Teledialogue is a combined research and design project aimed at improving communications between social workers and children under their custody living in foster care or youth institutions. While social workers are responsible for the welfare of placed children they are under heavy workload...... and often only communicate with children at biannual meetings - the minimum required by law. The purpose of Teledialogue is to use participatory methods to develop an IT-enabled concept for children and social workers to maintain communication between the biannual meetings. Social workers and children...... are thus the primary participants in this design process. This presentation describes the inclusion and participation of the placed children in Teledialogue. With an outset in Actor-Network Theory (ANT) two points are made: 1) that children were participating in shaping the design long before they were...

  7. Total design of participation

    DEFF Research Database (Denmark)

    Munch, Anders V.

    2016-01-01

    The idea of design as an art made not only for the people, but also by the people is an old dream going back at least to William Morris. It is, however, reappearing vigoriously in many kinds of design activism and grows out of the visions of a Total Design of society. The ideas of participation b...... for? To which degree should everyone be educated in ’design literacy’ to participate? Total design of participation is an artistic intervention in society and must be discussed in this utopian tradition....... by Tim Brown can be compared to considerations by László Moholy-Nagy and Walter Gropuis on the training and education of active and capable citizens. This opens, though, some dilemmas to discuss: To what extend is the capability of creativity then a (pre)condition to be a citizen of the society wished...

  8. From understanding to participation

    DEFF Research Database (Denmark)

    Raudaskoski, Pirkko Liisa

    2013-01-01

    The paper presents some methodological considerations around the topic of the AFinLA 2012 Autumn Symposium: Multimodal discourses of participation. The aim is to shed theoretical and analytical light on embodied participation in material settings. The research is placed in a relational perspective...... in which entities (for example, the world, culture, society, organization and identities) emerge through entangled, layered practices in concrete circumstances. Understanding is not treated as a philosophical puzzle or as a purely linguistic phenomenon. Rather, it is conceptualized as an embodied......, multimodal process in which language together with bodily senses (vision, hearing, touch, smell and taste) and a sense of place contribute to a phenomenon being recognized (as shared). Participation can result in inclusion or exclusion, a claim which is discussed with the help of a pilot study from...

  9. eParticipation Research

    DEFF Research Database (Denmark)

    Medaglia, Rony

    2012-01-01

    Research on the use of information technology to support democratic decision-making (eParticipation) is experiencing ongoing growth, stimulated by an increasing attention from both practitioner and research communities. This study provides the first longitudinal analysis of the development of the e......Participation field based on a shared framework, capturing the directions that the research field of eParticipation is taking in recent developments. Drawing on a literature search covering the period from April 2006 to March 2011, this study identifies, analyzes, and classifies 122 research articles within...... also suggests new analytical categories of research. Drawing on the analysis, inputs for a research agenda are suggested. These include the need to move beyond a technological perspective, encouraging the ongoing shift of research focus from government to citizens and other stakeholders, and the need...

  10. Electron detector

    International Nuclear Information System (INIS)

    Hashimoto, H.; Mogami, A.

    1975-01-01

    A device for measuring electron densities at a given energy level in an electron beam or the like having strong background noise, for example, in the detection of Auger electric energy spectrums is described. An electron analyzer passes electrons at the given energy level and at the same time electrons of at least one adjacent energy level. Detecting means associated therewith produce signals indicative of the densities of the electrons at each energy level and combine these signals to produce a signal indicative of the density of the electrons of the given energy level absent background noise

  11. eParticipation Research

    DEFF Research Database (Denmark)

    Medaglia, Rony

    2011-01-01

    This paper provides an update of the existing eParticipation research state of the art, and a longitudinal analysis of the development of the eParticipation field based on a shared framework of analysis. Drawing on a literature search covering the period from April 2006 to March 2011 included, 123......, sometimes in counterintuitive directions. Drawing on the analysis, the conclusion section provides inputs for a research agenda. These include the need to move beyond a technological perspective, and encouraging the ongoing shift of research focus from government to citizens and other stakeholders....

  12. The Subjectivity of Participation

    DEFF Research Database (Denmark)

    Nissen, Morten

    of a community of social/youth workers in Copenhagen between 1987 and 2003, who developed a pedagogy through creating collectives and mobilizing young people as participants. The theoretical and practical traditions are combined in a unique methodology viewing research as a contentious modeling of prototypical......What is a 'we' – a collective – and how can we use such communal self-knowledge to help people? This book is about collectivity, participation, and subjectivity – and about the social theories that may help us understand these matters. It also seeks to learn from the innovative practices and ideas...

  13. Trapping and release of cargo molecules from a micro-stamped mesoporous thin film controlled by Poly(NIPAAm-co-AAm).

    Science.gov (United States)

    Russell, Melissa M; Raboin, Lorraine; Guardado-Alvarez, Tania M; Zink, Jeffrey I

    2014-05-01

    Materials that utilize the micropatterned structure of a mesoporous silica film to successfully load and release cargo using a thermal sensitive polymer are presented in this paper. Films with pore sizes of ~2 nm and ~5 nm aligned in the pulling direction were synthesized using evaporation induced self-assembly techniques. The pores are exposed using a new method of stamping micropatterns without the use hydrofluoric acid. A well studied temperature dependent polymer (poly(N-isopropylacrylamide-co-Acrylamide)) was grafted onto the surface of these films to act as a temperature activated gatekeeper. Below the lower critical solution temperature (LCST) the polymer is erect and can block the pore openings, trapping cargo inside the pores. When the temperature is above the LCST the polymer collapses and unblocks the pores, allowing cargo to escape. The loading capacities as well as the reusability of these films were studied.

  14. The ANTARES Detector: Electronics and Readout

    Science.gov (United States)

    Circella, M.

    The ANTARES collaboration is building an underwater neutrino telescope at 2500 m depth in the Mediterranean Sea. The experiment aims to detect high- energy cosmic neutrinos using a 3D array of 900 photomultipliers distributed along 12 lines. 5 such lines have been operational since January 2007. The PMTs collect the Cherenkov light induced by neutrino-produced charged particles in the water. In this contribution, we will illustrate the electronics and the data acquisition system of the apparatus and discuss their performance. The PMT signals are digitized and time-stamped offshore. The front-end electronics, based on the ASIC Analogue Ring Sampler, is located inside electronics modules which collect data from PMT triplets and control the various calibration/monitoring devices. Bidirectional data communication is maintained between the shore station and the apparatus over a network of optical fibres with a DWDM technique. This is a convenient solution to allow control of the detector from the shore and to guarantee a high-bandwidth for data transport to shore. Common clock signals, GPS-synchronized onshore, are delivered to the whole apparatus on dedicated optical fibres. An onshore computer farm performs the data filtering and, depending on selectable trigger conditions, writes data to disk. Results from the current 5-line apparatus will be shown.

  15. Do children in rural areas still have different access to health care? Results from a statewide survey of Oregon's food stamp population.

    Science.gov (United States)

    DeVoe, Jennifer E; Krois, Lisa; Stenger, Rob

    2009-01-01

    To determine if rural residence is independently associated with different access to health care services for children eligible for public health insurance. We conducted a mail-return survey of 10,175 families randomly selected from Oregon's food stamp population (46% rural and 54% urban). With a response rate of 31%, we used a raking ratio estimation process to weight results back to the overall food stamp population. We examined associations between rural residence and access to health care (adjusting for child's age, child's race/ethnicity, household income, parental employment, and parental and child's insurance type). A second logistic regression model controlled for child's special health care needs. Compared with urban children (reference = 1.00), rural children were more likely to have unmet medical care needs (odds ratio [OR] 1.48, 95% confidence interval [CI] 1.07-2.04), problems getting dental care (OR 1.36, 95% CI 1.03-1.79), and at least one emergency department visit in the past year (OR 1.42, 95% CI 1.10-1.81). After adjusting for special health care needs (more prevalent among rural children), there was no rural-urban difference in unmet medical needs, but physician visits were more likely among rural children. There were no statistically significant differences in unmet prescription needs, delayed urgent care, or having a usual source of care. These findings suggest that access disparities between rural and urban low-income children persist, even after adjusting for health insurance. Coupled with continued expansions in children's health insurance coverage, targeted policy interventions are needed to ensure the availability of health care services for children in rural areas, especially those with special needs.

  16. PENGUKURAN NILAI OVERALL EQUIPMENT EFFECTIVENESS SEBAGAI DASAR USAHA PERBAIKAN PROSES MANUFAKTUR PADA LINI PRODUKSI (Studi Kasus pada Stamping Production Division Sebuah Industri Otomotif

    Directory of Open Access Journals (Sweden)

    Robby Suhendra

    2005-01-01

    Full Text Available Overall Equipment Effectiveness (OEE is an effectiveness measurement method of equipment utilization in the implementation of Total Productive Maintenance (TPM. The ability of identification in details toward main problem and the cause factors that makes the improvement efforts become more focused is the reason why this method applied comprehensively by all manufacturing companies around the world. Manufacturing process at Stamping Production Division an automotive isdustry still keeps some unrevealed problems. This condition makes the achievement of OEE figure below the target that means production equipments are not utilized optimally yet. The expression of main problem and the cause factors is needed before the company starts some improvement efforts. This research is started by understanding the equipment losses that existed in company. Then, measuring the achievement of OEE figure in one period and through the pareto analysis toward the measurement's results, the main problem and the cause factors are obtained and clearly depicted in cause-and-effect diagram. Abstract in Bahasa Indonesia : Overall Equipment Effectiveness (OEE adalah metode pengukuran efektivitas penggunaan suatu peralatan. OEE dikenal sebagai salah satu aplikasi progam Total Productive Maintenance (TPM. Kemampuan mengidentifikasikan secara jelas akar permasalahan dan faktor penyebabnya sehingga membuat usaha perbaikan menjadi terfokus merupakan faktor utama metode ini diaplikasikan secara menyeluruh oleh banyak perusahaan didunia. Saat ini proses manufaktur di Stamping Production Division sebuah industri otomotif memiliki permasalahan yang belum terungkap jelas. Hal tersebut mengakibatkan penggunaan peralatan yang ada belum optimal. Pengungkapan akar masalah dan faktor penyebabnya diperlukan sebelum perusahaan melakukan usaha perbaikan. Penelitian ini dimulai dengan mengidentifikasi kerugian peralatan (Equipment Losses yang terjadi. Kemudian mengukur pencapaian nilai OEE

  17. Participation som organisatorisk praksis

    DEFF Research Database (Denmark)

    Jeppesen, Hans Jeppe; Jønsson, Thomas

    2009-01-01

    Hensigten med artiklen er at give et bidrag til forståelsen af begrebet organisatorisk participation både teoretisk og ud fra praksis. Det gøres ud fra analyser og tematiseringer af participationens mangfoldighed, participationssystemers konstituering, participationens substans og finalitet samt...

  18. From spectator to participant

    DEFF Research Database (Denmark)

    Hoffmann, Birgitte; Kofoed, Jens

    The book collects experiences and methods for citizens’ participation in order to strengthen the local Agenda 21 process. 5 different types of methods is presented: Methods of analyses and evaluation, methods of dialogue, methods for action, methods for networking, and finely methods for involving...

  19. List of Participants 183

    Indian Academy of Sciences (India)

    List of participants. Sen D, BARC, Mumbai, India. Sequeira A, Mumbai, India. Shaikh A M, BARC, Mumbai, India. Sharma Daksha, AMU, Aligarh, India. Sharma K S, MS University of Baroda,. Vadodara, India. Sharma S M, BARC, Mumbai, India. Shinde A B, BARC, Mumbai, India. Shukla A, Martin-Luther University,. Germany.

  20. BURNOUT AND OCCUPATIONAL PARTICIPATION

    Science.gov (United States)

    Eren, Hakan; Huri, Meral; Bağış, Nilsun; Başıbüyük, Onur; Şahin, Sedef; Umaroğlu, Mutlu; Orhan, Kaan

    2016-11-01

    The aim of the present study was to investigate the prevalence of burnout and occupational participation limitation among dental students in a dental school in Turkey. Four hundred fifty-eight dental students (females=153; males=305) were included in the study. The age range varied from 17-to-38 years. Maslach Burnout Inventory-Student Version (MBI-SV) and Canadian Occupational Performance Measure (COPM) were used to gather data. Descriptive analyses, t-test, and Kruskall-Wallis test for independent groups were used for data analyses. The results indicated that 26% of all the students have burnout in terms of emotional exhaustion (25%), cynicism (18%), and academic efficacy (14%). The results showed that burnout is statistically significant in relation to demographics (pstudents showed considerably decreased occupational performance and satisfaction scores, which suggested occupational participation limitations. Occupational performance and satisfaction scores were inversely correlated with emotional exhaustion and cynicism, while directly correlated with reduced academic efficacy (pburnout and occupational participation limitation can be seen among dental students. Students with burnout may also have occupational participation limitation. Enriching dental education programs with different psychological strategies may be useful for education of healthy dentists and improve the quality of oral and dental health services.

  1. Participation and power

    DEFF Research Database (Denmark)

    to participation conceptualised as various degrees of codetermination in organisations and in research processes?’ The anthology is part of a follow-up on an initiative taken in 2010 by Professor Werner Fricke, editor-in-chief of the International Journal of Action Research for many years. His vision was to create...

  2. Walking - Sensing - Participation

    DEFF Research Database (Denmark)

    Bødker, Mads; Meinhardt, Nina Dam; Browning, David

    Building on ethnographic research and social theory in the field of ‘mobilities’, this workshop paper suggests that field work based on simply walking with people entails a form of embodied participation that informs technological interventions by creating a space within which to address a wider...

  3. Participation and environment

    NARCIS (Netherlands)

    Coenen, Franciscus H.J.M.; Huitema, Dave; O'Toole, Laurence J.; Coenen, Franciscus H.J.M.; Huitema, D.; O'Toole, Laurence J.

    1998-01-01

    The main subject to which this book seeks to contribute is the question of how and under which circumstances public participation can enhance the quality of environmental decision-making. This chapter outlines the issues addressed in the succeeding contributions. The core of the argument is that in

  4. Participation under Uncertainty

    International Nuclear Information System (INIS)

    Boudourides, Moses A.

    2003-01-01

    This essay reviews a number of theoretical perspectives about uncertainty and participation in the present-day knowledge-based society. After discussing the on-going reconfigurations of science, technology and society, we examine how appropriate for policy studies are various theories of social complexity. Post-normal science is such an example of a complexity-motivated approach, which justifies civic participation as a policy response to an increasing uncertainty. But there are different categories and models of uncertainties implying a variety of configurations of policy processes. A particular role in all of them is played by expertise whose democratization is an often-claimed imperative nowadays. Moreover, we discuss how different participatory arrangements are shaped into instruments of policy-making and framing regulatory processes. As participation necessitates and triggers deliberation, we proceed to examine the role and the barriers of deliberativeness. Finally, we conclude by referring to some critical views about the ultimate assumptions of recent European policy frameworks and the conceptions of civic participation and politicization that they invoke

  5. List of participants

    Indian Academy of Sciences (India)

    List of participants. Abbas Sohrab, BARC, Mumbai, India. Achary S N, BARC, Mumbai, India. Acharya Prashant G, JMS College, Ahmedabad, India. Aggarwal S K, BARC, Mumbai, India. Agrawal Ashish, BARC, Mumbai, India. Alam Md Sayem, AMU, Aligarh, India. Alamelu D, BARC, Mumbai, India. Aldona Rajewska, IAE ...

  6. List of participants

    Indian Academy of Sciences (India)

    List of participants. Behera Nirbhay Kumar, Department of Physics, Indian Institute of Technology Bom- bay, Powai, Mumbai 400 076, India. Behera Shiba Prasad, Nuclear Physics Division, Bhabha Atomic Research Centre,. Mumbai 400 085, India. Bhagwat Ameeya Ashok, Department of Phyiscs, Indian Institute of ...

  7. Participation of Youth

    OpenAIRE

    UNCTAD; World Bank

    2018-01-01

    This note provides examples that investors, civil society, and governments can follow to engage youth in participating in agriculture. Young people can be the driving force for the inclusive rural transformation needed to address the many challenges posed by growing populations, urbanization, and youth unemployment. Yet, many young people are frustrated by the lifestylesand opportunities a...

  8. List of Participants

    Indian Academy of Sciences (India)

    List of Participants. Margo Aller. Denis Bastieri. Xiongwei Bi. Weihao Bian. Vera Bychkova. Bo Chai. Jianling Chen. Xuhui Chen. Ye Chen. Zhifu Chen. Yongjun Chen. Liang Chen. Zhaoyu Chen. Kwongsang Cheng. Lang Cui. Benzhong Dai. Zhen Ding. Dimitrios Emmanoulopoulos. Xiaohong Fan. Junhui Fan. Longxing Fan.

  9. Participation in decision making

    Directory of Open Access Journals (Sweden)

    EG Valoyi

    2000-06-01

    Full Text Available The aim of the present study was to determine the extent to which employees would like to participate in decision making concerning various organisational issues, especially those concerning: the work itself, working conditions, human resources issues, and corporate policy and planning. The sample consisted of 146 participants, including managers, middle managers, and junior officials from a South African development corporation. A questionnaire to measure employees' desire to participate in decision making was specially constructed for this investigation. It has found that employees with higher academic qualifications were more desirous to participate in decision-making at all levels than employees with lower academic qualifications. This was also true for employees in higher job grades than in lower job grades. Men were more desirous to participate in decision making than women. The implications of the findings are discussed. Opsomming Die doel van die huidige studie was om vas te stel in watter mate werknemers sal wil deelneem aan die besluit- nameproses van organisasies, veral rakende die volgende sake: die werk self, werksomstandighede, menslike hulpbronaangeleenthede en korporatiewe beleid en beplanning. Die steekproef het uit 146 deelnemers, insluitende bestuurders, middelvlakbestuurders en junior amptenare van'n Suid Afrikaanse ontwikkelingskorporasie, bestaan. nVraelys wat die begeerte van werknemers meet om aan die besluitnameproses deel te neem, is spesiaal vir die doel van hierdie ondersoek, ontwerp. Dit is bevind dat werknemers met hoer akademiese kwalifikasies meer begerig is om aan die besluitnameproses op alle vlakke deel te neem as werknemers met laer akademiese kwalifikasies. Dit was ook waar vir werknemers in hoervlakposte vergeleke met werknemers in laervlakposte. Mans was ook meer begerig om aan die besluitnameproses deel te neem as vroue. Die implikasies van die studie word bespreek.

  10. Epilepsy and sports participation.

    Science.gov (United States)

    Howard, Gregory M; Radloff, Monika; Sevier, Thomas L

    2004-02-01

    Epilepsy is a common disease found in 2% of the population, affecting both young and old. Unfortunately, epileptics have previously been discouraged from participation in physical activity and sports for fear of inducing seizures or increasing seizure frequency. Despite a shift in medical recommendations toward encouraging rather than restricting participation, the stigma remains and epileptics continue to be less active than the general population. This results in increased body mass index, decreased aerobic endurance, poorer self-esteem, and higher levels of anxiety and depression. Although there are rare cases of exercise-induced seizures, studies have shown that physical activity can decrease seizure frequency, as well as lead to improved cardiovascular and psychologic health. The majority of sports are safe for epileptics to participate in with special attention to adequate seizure control, close monitoring of medications, and preparation of family, coaches, or trainers. Contact sports including football, hockey, and soccer have not been shown to induce seizures, and epileptics should not be precluded from participation. Water sports and swimming are felt to be safe if seizures are well controlled and direct supervision is present. Additional care must be taken in sports involving heights such as gymnastics, harnessed rock climbing, or horseback riding. Sports such as hang-gliding, scuba diving, or free climbing are not recommended, given the risk of severe injury or death, if a seizure were to occur during the activity. This article reviews the risks and benefits of physical activity in epileptics, discusses sports in which epileptics may participate, and addresses how to decrease possible risks for injury.

  11. Electron/electron acoustic instability

    International Nuclear Information System (INIS)

    Gary, S.P.

    1987-01-01

    The electron acoustic wave becomes a normal mode of an unmagnetized collisionless plasma in the presence of two electron components with similar densities, but strongly disparate temperatures. The characteristic frequency of this mode is the plasma frequency of the cooler electron component. If these two electron components have a relative drift speed several times the thermal speed of the cooler component, the electron/electron acoustic instability may arise. This paper describes the parametric dependences of the threshold drift speed and maximum growth rate of this instability, and compares these with the same properties of the electron/ion acoustic instability. Under the condition of zero current, the electron/ion acoustic instability typically has the lower threshold drift speed, so that observation of the electron/electron acoustic instability is a strong indication of the presence of an electrical current in the plasma

  12. High-performance electronics for time-of-flight PET systems

    International Nuclear Information System (INIS)

    Choong, W-S; Peng, Q; Vu, C Q; Turko, B T; Moses, W W

    2013-01-01

    We have designed and built a high-performance readout electronics system for time-of-flight positron emission tomography (TOF PET) cameras. The electronics architecture is based on the electronics for a commercial whole-body PET camera (Siemens/CPS Cardinal electronics), modified to improve the timing performance. The fundamental contributions in the electronics that can limit the timing resolution include the constant fraction discriminator (CFD), which converts the analog electrical signal from the photo-detector to a digital signal whose leading edge is time-correlated with the input signal, and the time-to-digital converter (TDC), which provides a time stamp for the CFD output. Coincident events are identified by digitally comparing the values of the time stamps. In the Cardinal electronics, the front-end processing electronics are performed by an Analog subsection board, which has two application-specific integrated circuits (ASICs), each servicing a PET block detector module. The ASIC has a built-in CFD and TDC. We found that a significant degradation in the timing resolution comes from the ASIC's CFD and TDC. Therefore, we have designed and built an improved Analog subsection board that replaces the ASIC's CFD and TDC with a high-performance CFD (made with discrete components) and TDC (using the CERN high-performance TDC ASIC). The improved Analog subsection board is used in a custom single-ring LSO-based TOF PET camera. The electronics system achieves a timing resolution of 60 ps FWHM. Prototype TOF detector modules are read out with the electronics system and give coincidence timing resolutions of 259 ps FWHM and 156 ps FWHM for detector modules coupled to LSO and LaBr 3 crystals respectively.

  13. Walking - Sensing - Participation

    DEFF Research Database (Denmark)

    Bødker, Mads; Meinhardt, Nina Dam; Browning, David

    2014-01-01

    Building on ethnographic research and social theory in the field of ‘mobilities’, this workshop paper suggests that field work based on simply walking with people entails a form of embodied participation that informs technological interventions by creating a space within which to address a wider ...... set of experiential or ‘felt’ qualities of living with mobile technologies. Moving from reflections on the value of walking with people, the paper outlines some affordances of a smartphone application built to capture place experiences through walking.......Building on ethnographic research and social theory in the field of ‘mobilities’, this workshop paper suggests that field work based on simply walking with people entails a form of embodied participation that informs technological interventions by creating a space within which to address a wider...

  14. Public Participation GIS

    DEFF Research Database (Denmark)

    Hansen, Henning Sten

    2004-01-01

    The protection and enhancement of the environment is the main aim of most environmental planning, and the use of geographic information as well as public participation can improve the quality of both the processes and the decisions. The current paper describes the role of web-based geographic...... information in environmental planning and gives an overview over the various approaches to public participation. The current advances in Web-based GIS in many countries contain great possibilities for supporting good governance based on information and knowledge on the one hand and active involvement...... planning. The methods and techniques are illustrated by Danish examples from practical environmental planning. At the end I present some ideas for following up activities....

  15. Participation and institutional Change

    DEFF Research Database (Denmark)

    Tofteng, Ditte Maria Børglum; Bladt, Mette; Madsen, Lisbeth

    in the municipality of Copenhagen, a social partnership connected to a housing association and the university college of Copenhagen. Approximately 60 professionals (pedagogues, social workers and others) is part of the project. They will participate in the project in to groups. The activities consists of nine joint...... will supervise them. The purpose is for the minor groups to work with a group of at risk youth trying out the upturned participation model. The themes of the groups will be created by the young people alone or in joint ventures with the professionals. Expected Outcomes Denmark has been a welfare system since...... and Bjørn Gustavsen(ed.) (1996). Beyond Theory. London. John benjamins publishing. Tofteng, D & Husted, M (2007): Respekt og realiteter. Ph.D. afhandling. ENSPAC. Roskilde Universitet Author Information Ditte Tofteng (presenting) University college capital, denmark Research and development Copenhagen N...

  16. Invited to Participate?

    DEFF Research Database (Denmark)

    Nielsen, Karen Dam

    point out how patient-involving e-health may reinforce existing challenges of establishing shared understandings between patients and clinicians of: 1) what constitutes relevant information in the context of care; and 2) how to interpret their mutual (communicative) responsibilities in order for care......This thesis presents an ethnography of e-health and patient participation in heart care. Drawing on Science & Technology Studies (STS) and Computer Supported Cooperative Work (CSCW), the thesis goes beyond the common narrative of e-health as a solution and vehicle for transforming healthcare...... towards more patient-centered practices and explores what patient-involving e-health, in practice, can become. With the user test of an e-health system for ICD-patients as the pivotal case, the thesis unpacks what happens when patients are invited to become participants and, in particular, information...

  17. Participating in patient education

    DEFF Research Database (Denmark)

    Kristiansen, Tine Mechlenborg; Antoft, Rasmus

    2015-01-01

    The paper builds on previous ethnographic research in Denmark focusing on the significance of participating in a locally developed patient education programme for everyday life (Kristiansen et.al. 2015). It presents a secondary analysis. Group based patient education can be understood as a health...... point is applied in order to illustrate two central status passages taking place at the locally developed patient education programme: 1) The status passage from novice to an experienced person with chronic illness, and 2) The transformation from adolescence to adulthood living with a chronic illness...... studies within the field of patient education and how it can enhance our understanding of the social practices at play and the identity transitions occurring as a result of the chronic illness itself and the participation at the programme. Further we reflect on potential practical implications of our...

  18. Children's participation in Teledialogue

    DEFF Research Database (Denmark)

    Andersen, Lars Bo; Lauritsen, Peter; Danholt, Peter

    2014-01-01

    Teledialogue is a combined research and design project aimed at improving communications between social workers and children under their custody living in foster care or youth institutions. While social workers are responsible for the welfare of placed children they are under heavy workload...... that children’s participation unfolds throughout the entire project; it shapes funding proposals, research problems and design activities and is, in turn, itself being shaped by these....

  19. Planning and participation

    International Nuclear Information System (INIS)

    Rucht, D.

    1982-01-01

    This study is trying to give a vast survey of the political and administrative system. It is to demonstrate the relations between its secular development trends, the necessity and the limits of political planning under the present conditions and, finally, the increasing demands for participation as expressed especially by citizens' initiatives. These stages, however, are certainly not presented in a smooth manner. Yet the author claims to have kept a certain continuity and inner logic of presentation and argumentation. (orig./DG) [de

  20. Sanitation and Civic Participation

    Directory of Open Access Journals (Sweden)

    José Antonio Peña Barreto

    2016-08-01

    Full Text Available This research is proposed in order to propose an action plan for environmental sanitation citizen participation in the "Manuela Sáenz" Concentrating National Basic School Parish Municipality City Bolivia Pedraza Barinas state. It is part of the qualitative approach in the form of participatory action research and supported by a narrative descriptive design. The selected scenario for performance of work was the Concentrating National School "Manuela Sáenz" key informants consist of 1 member of the community, 1 member of the community council and one teacher of the institution. The techniques used are observation and depth interview, using as instruments a field notebook and an interview script. For the presentation and analysis of results he was categorized, triangulated and theorized the information obtained, performing a thorough and detailed report on the integrated management of solid waste diagnosis. Subsequently, the proposal called Action Plan for environmental sanitation was developed with citizen participation in concentrated Manuela Saenz National Basic School. Then the proposal where participants expressed the view that activities allowed to obtain very important basic knowledge on environmental sanitation was run.

  1. Reconstruction and identification of electrons in the Atlas experiment. Setup of a Tier 2 of the computing grid; Reconstruction et identification des electrons dans l'experience Atlas. Participation a la mise en place d'un Tier 2 de la grille de calcul

    Energy Technology Data Exchange (ETDEWEB)

    Derue, F

    2008-03-15

    The origin of the mass of elementary particles is linked to the electroweak symmetry breaking mechanism. Its study will be one of the main efforts of the Atlas experiment at the Large Hadron Collider of CERN, starting in 2008. In most cases, studies will be limited by our knowledge of the detector performances, as the precision of the energy reconstruction or the efficiency to identify particles. This manuscript presents a work dedicated to the reconstruction of electrons in the Atlas experiment with simulated data and data taken during the combined test beam of 2004. The analysis of the Atlas data implies the use of a huge amount of computing and storage resources which brought to the development of a world computing grid. (author)

  2. Electron Microscopy.

    Science.gov (United States)

    Beer, Michael

    1980-01-01

    Reviews technical aspects of structure determination in biological electron microscopy (EM). Discusses low dose EM, low temperature microscopy, electron energy loss spectra, determination of mass or molecular weight, and EM of labeled systems. Cites 34 references. (CS)

  3. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  4. Understand electronics

    CERN Document Server

    Bishop, Owen

    2013-01-01

    Understand Electronics provides a readable introduction to the exciting world of electronics for the student or enthusiast with little previous knowledge. The subject is treated with the minimum of mathematics and the book is extensively illustrated.This is an essential guide for the newcomer to electronics, and replaces the author's best-selling Beginner's Guide to Electronics.The step-by-step approach makes this book ideal for introductory courses such as the Intermediate GNVQ.

  5. Vacuum electronics

    CERN Document Server

    Eichmeier, Joseph A

    2008-01-01

    Nineteen experts from the electronics industry, research institutes and universities have joined forces to prepare this book. ""Vacuum Electronics"" covers the electrophysical fundamentals, the present state of the art and applications, as well as the future prospects of microwave tubes and systems, optoelectronics vacuum devices, electron and ion beam devices, light and X-ray emitters, particle accelerators and vacuum interrupters. These topics are supplemented by useful information about the materials and technologies of vacuum electronics and vacuum technology.

  6. Electronic Commerce

    OpenAIRE

    Slavko Đerić

    2016-01-01

    Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks...

  7. Public Participation in Planetary Exploration

    Science.gov (United States)

    Friedman, Louis

    2000-07-01

    In the past several years The Planetary Society has created several innovative opportunities for general public participation in the exploration of the solar system and the search for extraterrestrial life. The conduct of such exploration has traditionally been the province of a few thousand, at most, of professionally involved scientists and engineers. Yet the rationale for spending resources required by broad and far-reaching exploration involves a greater societal interest - it frequently being noted that the rationale cannot rely on science alone. This paper reports on the more notable of the opportunities for general public participation, in particular: 1) Visions of Mars: a CD containing the works of science fiction about Mars, designed to be placed on Mars as the first library to be found by eventual human explorers; 2) MAPEX: a Microelectronics And Photonics Experiment, measuring the radiation environment for future human explorers of Mars, and containing a electron beam lithograph of names of all the members of The Planetary Society at a particular time; 3) Naming of spacecraft: Involvement in the naming of spacecraft: Magellan, Sojourner; 4) The Mars Microphone: the first privately funded instrument to be sent to another world; 5) Red Rover Goes to Mars: the first commercial-education partnership on a planetary mission; 6) Student designed nanoexperiments: to fly on a Mars lander; and 7) SETI@home: a tool permitting millions to contribute to research and data processing in the search for extraterrestrial intelligence. A brief description of each of the projects will be given, and the opportunity it provided for public participation described. The evolving complexity of these projects suggest that more opportunities will be found, and that the role of public participation can increase at the same time as making substantive contributions to the flight missions. It will be suggested that these projects presage the day that planetary exploration will be truly

  8. Crew participating in the ALICE TRD beamtests

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 1: Sitting in front of the experimental setup is part of the crew participating in the ALICE TRD beamtests at pion/electron secondary beams at CERN Proton Synchrotron in October 2002. From left to right: Mircea Ciobanu, Andres Sandoval, Vojtech Petracek, Oliver Busch, Chilo Garabatos, Wilrid Ludolphs and Harald Appelshaeuser. photo 2: Two fierce experimental physicists, Chilo Garabatos (left) and Anton Andronic, guarding their most valuable asset: Transition Radiation Detector prototypes for the ALICE experiment. These detectors are tested in electron/pion secondary beams at CERN Proton Synchrotron.

  9. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  10. ELECTRONIC SIGNATURES

    African Journals Online (AJOL)

    10332324

    (a) facilitate ecommerce;2. (b) remove and prevent barriers to electronic communications in South Africa;3. (c) ensure that electronic transactions in the Republic conform to the highest international standards;4. (d) promote the development of electronic transactions services which are responsive to the needs of users and ...

  11. Cultural participation in Europe

    DEFF Research Database (Denmark)

    Stevenson, David; Kann-Rasmussen, Nanna; Balling, Gitte

    2015-01-01

    Europe has a ‘problem’; it is becoming a ‘less cultural continent’ as fewer Europeans are ‘engaging in cultural activities’. This conclusion has been reached due to the findings of the latest cross national cultural participation survey. This paper questions the existence of this ‘problem......’ and instead suggests that there is a shared problematisation across Europe sustained by common discursive archaeology that employs various discursive strands in relation to a dominant institutional discourse. The argument is that the ‘problem’ of ‘non-participation’ legitimates a ‘solution’ that predates its...... representation in both countries, and potentially across Europe, appears to rely....

  12. Participation for Development

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; De La Harpe, Retha; Korpela, Mikko

    2014-01-01

    Information and Communication Technology (ICT) is more and more promoted as a driver and facilitator of economic growth and development in low and middle income countries. ICT for Development (ICT4D) though has mixed successes. Sustainability of solutions and usability respectively usefulness...... is rare. The workshop aims at bringing together the PD researchers working with under-privileged communities and attracting researchers from the ICT4D communities to the PD conference. The goal is to share experiences and start a discussion on how participation, ICT and development might relate....

  13. Acceptance, Tolerance, Participation

    International Nuclear Information System (INIS)

    1993-01-01

    The problem of radioactive waste management from an ethical and societal viewpoint was treated in this seminar, which had participants from universities (social, theological, philosophical and science institutes), waste management industry, and regulatory and controlling authorities. After initial reviews on repository technology, policies and schedules, knowledge gaps, and ethical aspects on decision making under uncertainty, four subjects were treated in lectures and discussions: Democratic collective responsibility, Handling threats in democratic decision making, Waste management - a technological operation with a social dimension, Acceptance and legitimity. Lectures with comments and discussions are collected in this report

  14. Basic electronics

    CERN Document Server

    Holbrook, Harold D

    1971-01-01

    Basic Electronics is an elementary text designed for basic instruction in electricity and electronics. It gives emphasis on electronic emission and the vacuum tube and shows transistor circuits in parallel with electron tube circuits. This book also demonstrates how the transistor merely replaces the tube, with proper change of circuit constants as required. Many problems are presented at the end of each chapter. This book is comprised of 17 chapters and opens with an overview of electron theory, followed by a discussion on resistance, inductance, and capacitance, along with their effects on t

  15. Sticker electronics

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-09-08

    Electronic stickers may be manufactured on flexible substrates (110, 120, 130) as layers and packaged together. The package may then have an adhesive applied to one side to provide capability for sticking the electronic devices to surfaces. The stickers can be wrappable, placed on surfaces, glued on walls or mirrors or wood or stone, and have electronics (112, 122, 132) which may or may not be ultrathin. Packaging for the electronic sticker can use polymer on cellulose manufacturing and/or three dimensional (3-D) printing. The electronic stickers may provide lighting capability, sensing capability, and/or recharging capabilities.

  16. [Women's participation in science].

    Science.gov (United States)

    Sánchez-Guzmán, María Alejandra; Corona-Vázquez, Teresa

    2009-01-01

    The participation of women in higher education in Mexico took place in the late 19th and early 20th century. The rise of women's enrollment in universities known as the "feminization of enrollment" occurred in the last thirty years. In this review we analyze how the new conditions that facilitated better access to higher education are reflected in the inclusion of women in science. We include an overview of the issues associated with a change in the demographics of enrollment, segregation of academic areas between men and women and participation in post graduate degrees. We also review the proportion of women in science. While in higher education the ratio between male and women is almost 50-50 and in some areas the presence of women is even higher, in the field of scientific research women account for barely 30% of professionals. This is largely due to structural conditions that limit the access of women to higher positions of power that have been predominantly taken by men.

  17. Spaceflight participant visits CERN!

    CERN Multimedia

    Kathryn Coldham

    2016-01-01

    On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

  18. PARTICIPANTS IN INSOLVENCY

    Directory of Open Access Journals (Sweden)

    RARES-SEBASTIAN PUIU-NAN

    2012-05-01

    Full Text Available The article examines the officials and other participants in insolvency. The main purpose of the insolvency procedure is to cover all the debts of the debtor side, in favor of his creditor side. The most important regulations regarding this issue consist in Law no. 85/2006, according to it in the insolvency procedure are to be appointed the following officials: insolvency courts of justice, insolvency judge, receiver, liquidator. All these officials have to act in celerity, in order to promptly perform acts and operations provided by law and to respect and provide other participants’ rights and obligations. My article present in the beginning the insolvency courts of justice, their material and territorial competence and the procedure rules. Next chapters are dedicated to the insolvency judge, receiver and liquidator and analyze the following issues: their appointment, their powers, their auxiliary officials and their ceasing of the powers. Some regards on the British law and French law are also included. The next chapter is dedicated to the participants to the insolvency procedure: the creditors general assembly, creditors committee and special administrator, followed by conclusions and recommendations.

  19. Electron Tree

    DEFF Research Database (Denmark)

    Appelt, Ane L; Rønde, Heidi S

    2013-01-01

    The photo shows a close-up of a Lichtenberg figure – popularly called an “electron tree” – produced in a cylinder of polymethyl methacrylate (PMMA). Electron trees are created by irradiating a suitable insulating material, in this case PMMA, with an intense high energy electron beam. Upon discharge......, during dielectric breakdown in the material, the electrons generate branching chains of fractures on leaving the PMMA, producing the tree pattern seen. To be able to create electron trees with a clinical linear accelerator, one needs to access the primary electron beam used for photon treatments. We...... appropriated a linac that was being decommissioned in our department and dismantled the head to circumvent the target and ion chambers. This is one of 24 electron trees produced before we had to stop the fun and allow the rest of the accelerator to be disassembled....

  20. The electron and the electronics

    International Nuclear Information System (INIS)

    Sanchez Balmaseda, M.

    1997-01-01

    The aim of this work is to present a brief report of those historical events that originated and contributed to the scientific area of Electronics. The main discovering and investigations in both Vacuum Electronics and Semiconductor Electronics are reviewed. (Author) 12 refs

  1. Democracy and shareholder's participation

    Directory of Open Access Journals (Sweden)

    Radulović Vuk

    2014-01-01

    Full Text Available Democracy and participation of shareholders or the demand for their active participation in the meetings of the Assemblyhas increasingly gained in importance in modern conditions. This is because, negative trends of passivation, the limitations of democratic potential of shareholders and shareholders' rights abuse by the management body, especially in the work control and compensation policy of shareholders, have been observed in a detailed analysis of the application and results of the Shareholder Rights Directive. The passivity of shareholders, as one of the most striking features of their position in the joint stock company today, is the biggest problem and threat to democratic processes within the company. If we bear in mind that the most common definition of shareholder democracy is 'ability of shareholders to influence the management of the company', we can notice a clear picture of the seriousness and importance of the lack of shareholder participation. This is the reason why the author of this paper gradually examines the causes and consequences of the passivity of shareholders, the proposed changes in this context in the Law of the European Union and the practical implications of such solutions in practice. In addition, the author examines contemporary forms and conditions for shareholder democracy and the legal framework in the European Union and the Republic of Serbia. In this way, we analyze the situation in this area and point out shortcomings of certain solutions, as well as the implications they cause in practice. The main thesis from which starts the scientific work and which will be gradually proven through theoretical and practical analysis is that the wider social processes directly reflect on the state of the joint-stock companies, or the state of corporate governance. This means that the negative trends of modern democracy (in the constitutional sense are almost mirrored in economic capital (EC and our attempt in this paper

  2. Lifelong learning and participation

    DEFF Research Database (Denmark)

    Rothuizen, Jan Jaap; Molpeceres, Mariangeles; Hansen, Helle Krogh

    2014-01-01

    other things because a unilateral focus on the economic aspects may cause dissolution of the social cohesion and decrease in well-being for far too many people. The HEAR ME project aimed at developing strategies for lifelong learning and new roles for older people based on their competences, network...... in involvement of older people in voluntary social work as mentors for young people. The challenge of the ageing societies is quite often discussed as the ‘burden of the elderly’ and discussed as an economic problem. However, the challenge is not only economical. It is also a social and cultural challenge, among...... and an assumed desire of generativity. Action learning seems to be an appropriate learning concept in relation to keeping older people engaged in the community. The authors thus point at participating and lifelong learning as part of the answers to the demographic challenges, and they suggest what you might call...

  3. Public education and participation

    International Nuclear Information System (INIS)

    Kelly, J.E.

    1982-01-01

    As prescribed in Step 1 of the Public Education and Participation Process (attachment 1), industry, public interest groups, and decision-makers were briefed about the Subseabed Disposal Program. In regard to public interest groups, Drs. Hollister and Kelly were invited to present the technical and policy aspects of the Subseabed Program at a public forum in Hawaii sponsored by the Hawaii League of Women Voters, the Health Physics Society, and the East-West Center. The sponsors videotaped the forum for a film, entitled Slowly Dying Embers: Radioactive Waste and the Pacific, which will be shown on television in Hawaii. In response to requests for information about the Subseabed Program, Congressional Staff, Representatives, and Senators (attachment 2) were briefed about the Subseabed Program as legislation related to the Program moved through Congress (attachment 3). Science oriented publications also were contacted about the Program

  4. Public Participation Plan

    International Nuclear Information System (INIS)

    1984-06-01

    The purpose of this Public Participation Plan is to describe the Department of Energy's plan for involving the public in the decision-making process required by the National Environmental Policy Act (NEPA) of 1969 as related to the Uranium Mill Tailings Remedial Action (UMTRA) Project. This project was authorized by congress in the Uranium Mill Tailings Radiation Control Act of 1978, PL95-604. The Act provides for a cooperative effort with affected states and Indian tribes for the cleanup of designated inactive uranium mill tailings sites and associated vicinity properties, which are located in ten western states and in Pennsylvania. The Act was amended in 1982 to also include vicinity properties contaminated with residual radioactive material in Edgemont, South Dakota

  5. (Radio)active participation

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    This year, for the first time, CERN hosted the Rencontres internationales lycéennes de la radioprotection: a three-day event in which some 200 students from 16 schools in France and elsewhere came together to discuss the topic of radiation protection and to deepen their understanding of the field.   Participants of the Rencontres internationales lycéennes de la radioprotection 2014. Each year since 2008, the Centre d’étude sur l’évaluation de la protection dans le domaine nucléaire français (CEPN, the French centre for studies of the evaluation of nuclear protection) and the Institut de radioprotection et de sûreté nucléaire français (IRSN, the French institute for radiation protection and nuclear safety), in partnership with various other bodies*, have been organising radiation protection workshops. Aimed at students between the ages of 15 and 18 from France and beyo...

  6. Involvement Without Participation?

    DEFF Research Database (Denmark)

    Olsén, Peter

    2012-01-01

    The article presents a case study of a knowledge-intensive company that launched a 2-year project to improve their psychosocial working environment. All parties agreed on the project, and the methods used aimed to promote the involvement of the employees. Surprisingly, the psychosocial working...... and participation. In order to develop a more sustainable and viable psychosocial working environment, a broader and more democratic notion of organisational learning and managing is proposed....... environment did not improve; on the contrary, it deteriorated. The article highlights cultural and structural obstacles to the process, including an inadequate understanding of organisational learning and a narrow focus on market and competition. The endeavours did not consistently increase delegation...

  7. Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Slavko Đerić

    2016-12-01

    Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

  8. Electron spectroscopy

    International Nuclear Information System (INIS)

    Hegde, M.S.

    1979-01-01

    An introduction to the various techniques in electron spectroscopy is presented. These techniques include: (1) UV Photoelectron spectroscopy, (2) X-ray Photoelectron spectroscopy, (3) Auger electron spectroscopy, (4) Electron energy loss spectroscopy, (5) Penning ionization spectroscopy and (6) Ion neutralization spectroscopy. The radiations used in each technique, the basis of the technique and the special information obtained in structure determination in atoms and molecules by each technique are summarised. (A.K.)

  9. Polymer electronics

    CERN Document Server

    Hsin-Fei, Meng

    2013-01-01

    Polymer semiconductor is the only semiconductor that can be processed in solution. Electronics made by these flexible materials have many advantages such as large-area solution process, low cost, and high performance. Researchers and companies are increasingly dedicating time and money in polymer electronics. This book focuses on the fundamental materials and device physics of polymer electronics. It describes polymer light-emitting diodes, polymer field-effect transistors, organic vertical transistors, polymer solar cells, and many applications based on polymer electronics. The book also disc

  10. Electron Bifurcation

    Energy Technology Data Exchange (ETDEWEB)

    Peters, John W.; Miller, Anne-Frances; Jones, Anne K.; King, Paul W.; Adams, Michael W. W.

    2016-04-01

    Electron bifurcation is the recently recognized third mechanism of biological energy conservation. It simultaneously couples exergonic and endergonic oxidation-reduction reactions to circumvent thermodynamic barriers and minimize free energy loss. Little is known about the details of how electron bifurcating enzymes function, but specifics are beginning to emerge for several bifurcating enzymes. To date, those characterized contain a collection of redox cofactors including flavins and iron-sulfur clusters. Here we discuss the current understanding of bifurcating enzymes and the mechanistic features required to reversibly partition multiple electrons from a single redox site into exergonic and endergonic electron transfer paths.

  11. Microfluidic electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2012-08-21

    Microfluidics, a field that has been well-established for several decades, has seen extensive applications in the areas of biology, chemistry, and medicine. However, it might be very hard to imagine how such soft microfluidic devices would be used in other areas, such as electronics, in which stiff, solid metals, insulators, and semiconductors have previously dominated. Very recently, things have radically changed. Taking advantage of native properties of microfluidics, advances in microfluidics-based electronics have shown great potential in numerous new appealing applications, e.g. bio-inspired devices, body-worn healthcare and medical sensing systems, and ergonomic units, in which conventional rigid, bulky electronics are facing insurmountable obstacles to fulfil the demand on comfortable user experience. Not only would the birth of microfluidic electronics contribute to both the microfluidics and electronics fields, but it may also shape the future of our daily life. Nevertheless, microfluidic electronics are still at a very early stage, and significant efforts in research and development are needed to advance this emerging field. The intention of this article is to review recent research outcomes in the field of microfluidic electronics, and address current technical challenges and issues. The outlook of future development in microfluidic electronic devices and systems, as well as new fabrication techniques, is also discussed. Moreover, the authors would like to inspire both the microfluidics and electronics communities to further exploit this newly-established field.

  12. Electronics Industry

    National Research Council Canada - National Science Library

    Bell, Robert; Carroll-Garrison, Martina; Donovan, Daniel; Fisher, John; Guemmer, Paul; Harms, Robert; Kelly, Timothy; Love, Mattie; McReynolds, James; Ward, Ralph

    2006-01-01

    .... Government action to preserve strategic access to semiconductor producers is clearly needed to ensure DoD electronic systems can be built without compromising sensitive technology, though every...

  13. Isolated electrons

    Energy Technology Data Exchange (ETDEWEB)

    Ekstrom, Ph.; Winwland, D.

    1981-08-01

    The problem of electron g-factor measurement by means of an isolated electron is considered. The technique of the experiment performed at the Washington university is described. A single electron is enclosed in a homogeneous magnetic field which is superimposed by an electric field. The electric field configuration represents a Penning trap. The trap together with the enclosed electron forms an ''atom'' of macroscopic dimensions. The electron trajectory in the trap consists of three components. The electron quickly rotates over small loops (cyclotron motion), the centre of these loops slowly moves over a large circle (magistron motion). Meanwhile the electron oscillates back and forth along the trap axis. The electron motion in the atom field is quantized and the transitions between various types of motions correspond to definite radiation frequencies. At the anomal frequency the transition with spin flip is registered and the electron g-factor is measured. The value g=2.0023193044 is obtained with a probable error less than a unit of the last decimal digit.

  14. The impact of electronic prescribing systems on pharmacists’ time and workflow: protocol for a time-and-motion study in English NHS hospitals

    Science.gov (United States)

    Schofield, Behnaz; Cresswel, Kathrin; Westbrook, Johanna; Slee, Ann; Girling, Alan; Shah, Sonal; Coleman, Jamie; Sheikh, Aziz

    2015-01-01

    Introduction Electronic prescribing (ePrescribing) systems are rapidly being introduced into National Health Systems (NHS) hospitals in England following their widespread earlier adoption into primary care settings. Such systems require substantial changes in the way pharmacists organise their work and perform their roles. There is however as yet limited evidence on the extent to which these changes may support or compromise efficient and safe working practices by pharmacists. Identifying and quantifying these changes, and their effects, is central to informing system and work practice design, as well as informing training and implementation processes. This protocol describes a study to measure the impact of ePrescribing systems on pharmacists’ time and workflow. Methods and analysis A direct observational controlled pre–post implementation time-and-motion study will be conducted in six wards at one NHS Trust over two observational periods. Pharmacists will be shadowed and details of all work tasks performed will be collected and time-stamped. Task distribution, frequency and duration will be measured and changes in these measures preimplementation and postimplementation, and between control and intervention wards will be measured. Interviews with pharmacists will investigate their perceptions of the impact of the ePrescribing systems on their work and will be conducted in both periods. The extent to which pharmacists’ expectations of the impact of the ePrescribing systems on their work with postimplementation reports will be qualitatively explored, as will any differences between perceptions and results from the time-and-motion analysis. Ethics and dissemination Institutional research ethics approval has been obtained from The University of Edinburgh. Local approval from the participating NHS Trust and informed consent from participating pharmacists have been obtained, while also complying with local governance requirements. The results of the study will be

  15. Participation and social participation: are they distinct concepts?

    Science.gov (United States)

    Piškur, Barbara; Daniëls, Ramon; Jongmans, Marian J; Ketelaar, Marjolijn; Smeets, Rob J E M; Norton, Meghan; Beurskens, Anna J H M

    2014-03-01

    The concept of participation has been extensively used in health and social care literature since the World Health Organization introduced its description in the International Classification of Functioning, Disability and Health (ICF) in 2001. More recently, the concept of social participation is frequently used in research articles and policy reports. However, in the ICF, no specific definition exists for social participation, and an explanation of differences between the concepts is not available. The central question in this discussion article is whether participation, as defined by the ICF, and social participation are distinct concepts. This article illustrates the concepts of participation and social participation, presents a critical discussion of their definitions, followed by implications for rehabilitation and possible future directions. A clear definition for participation or social participation does not yet exist. Definitions for social participation differ from each other and are not sufficiently distinct from the ICF definition of participation. Although the ICF is regarded an important conceptual framework, it is criticised for not being comprehensive. The relevance of societal involvement of clients is evident for rehabilitation, but the current ICF definition of participation does not sufficiently capture societal involvement. Changing the ICF's definition of participation towards social roles would overcome a number of its shortcomings. Societal involvement would then be understood in the light of social roles. Consequently, there would be no need to make a distinction between social participation and participation.

  16. The electron

    International Nuclear Information System (INIS)

    Hestenes, David; Weingartshofer, Antonio

    1991-01-01

    The stupendous successes of the Dirac equation and quantum electro-dynamics have established the electron as the best understood of the fundamental constituents of matter. Nevertheless, physicists agree that the electron still has secrets to reveal. Moreover, powerful new theoretical and experimental tools for probing those secrets have been sharpened during the last decade. This workshop was organized to bring theorists and experimentalists together to discuss their common goal of knowing the electron. Present state and future prospects for progress toward that goal are here described. The theoretical papers encompass a wide range of views on the electron. Several argue that the 'Zitter-bewegung' is more than a mathematical peculiarity of the Dirac equation, that it may well be a real physical phenomenon and worthy of serious study, theoretically and experimentally. Besides generating the electron spin and magnetic moment, the 'Zitterbewegung' may be a vital clue to electron structure and self-interaction. Some of the papers employ a radical new formulation of the Dirac theory which reveals a hidden geo-metric structure in the theory that supports a 'Zitterbewegung' inter-pretation. For the last half century the properties of electrons have been probed primarily by scattering experiments at ever higher energies. Recently, however, two powerful new experimental techniques have emerged capable of giving alternative experimental views of the electron. First, techniques for confining single electrons for long term study have led to the most accurate measurements of the electron magnetic moment. Second, the interaction of high intensity laser fields with atoms and electrons have revealed striking new phenomena such as multiphoton ionization. refs.; figs.; tabs

  17. STUDI BANDING PELAPISAN MATERIAL SKD11 DENGAN METODE PHYSICAL VAPOUR DEPOSITION DAN THERMAL DIFUSION PADA KOMPONEN INSERT DIES MESIN STAMPING PRESS

    Directory of Open Access Journals (Sweden)

    Robertus Suryo Bisono

    2017-02-01

    Full Text Available Telah dilakukan pelapisan menggunakan Titanium Alumunium Nitrid (TIAlN dengan metode PVD Coating (Physical Vapour Diposition dan TD (Thermal Difusion  untuk perlakuan permukaan baja perkakas SKD11 sebagai material Insert Die komponen mesin Stamping Press setelah perlakuan hardening. Perlakuan permukaan dimaksudkan untuk meningkatkan kualitas permukaan khususnya kekerasan dan perubahan struktur mikro yang terjadi. Untuk mengetahui tingkat keberhasilan dari perlakuan permukaan tersebut dilakukan dengan memvariasi waktu proses, masing masing 2 sample diproses pada 4 jam, 5 jam dan 6 jam dengan temperatur  proses masing-masing  400ᴼ C. Kemudian satu dari tiap variable sample tersebut di panaskan pada suhu 1000ᴼ C selama 1 jam, pendinginan dilalukan dengan udara bebas tanpa proses quenching Untuk mengetahui hasilnya dilakukan uji kekerasan mikro Vickers, pengamatan struktur mikro Scanning Eectron Microscope (SEM, dan pengujian komposisi dengan Energy Defersif Sepectroscopy (EDS untuk mengetahui tingkat penyerapan material terdifusi. Hasil menunjukan bahwa SKD11 yang dilapisi TiAlN dengan metode PVD selama 6 jam menghasilkan lapisan yang paling keras yaitu 1363 HV dengan ketebalan lapisan 5,3µm. Proses pemanasan 1000⁰C selama 1 jam pada sample mengakibatkan penurunan kekerasan sample dan lapisan permukaan sample menjadi lebih tebal hingga 50µm. Penambahan lapisan diakibatkan oleh terdifusinya atom atom yang menyusun lapisan TiAlN ke dalam substrat serta keluarnya atom atom penyusun lapisan hingga membentuk lapisan kompleks.

  18. Case Study to Illustrate the Potential of Conformal Cooling Channels for Hot Stamping Dies Manufactured Using Hybrid Process of Laser Metal Deposition (LMD and Milling

    Directory of Open Access Journals (Sweden)

    Magdalena Cortina

    2018-02-01

    Full Text Available Hot stamping dies include cooling channels to treat the formed sheet. The optimum cooling channels of dies and molds should adapt to the shape and surface of the dies, so that a homogeneous temperature distribution and cooling are guaranteed. Nevertheless, cooling ducts are conventionally manufactured by deep drilling, attaining straight channels unable to follow the geometry of the tool. Laser Metal Deposition (LMD is an additive manufacturing technique capable of fabricating nearly free-form integrated cooling channels and therefore shape the so-called conformal cooling. The present work investigates the design and manufacturing of conformal cooling ducts, which are additively built up on hot work steel and then milled in order to attain the final part. Their mechanical performance and heat transfer capability has been evaluated, both experimentally and by means of thermal simulation. Finally, conformal cooling conduits are evaluated and compared to traditional straight channels. The results show that LMD is a proper technology for the generation of cooling ducts, opening the possibility to produce new geometries on dies and molds and, therefore, new products.

  19. Electronic marketplaces

    OpenAIRE

    TALAFOUSOVÁ, Jana

    2011-01-01

    This thesis describes the principles of electronic and Internet marketplaces. For analyzing the status of the use of electronic marketplaces and online polling was done with the actual marketplace and society, which is a member of the marketplace. Proposal that trade through the market is prepared for a particular company, which previously traded through the marketplace.

  20. Printed Electronics

    Science.gov (United States)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2016-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  1. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    reference material for power electronics engineers, students and academicians. We thank the editors of Sadhana for inviting us to guest-edit this special issue on power electronics. July 2017. KISHORE CHATTERJEE. Department of Electrical Engineering,. Indian Institute of Technology,. Bombay, Powai, Mumbai 400076, ...

  2. Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill

    International Nuclear Information System (INIS)

    Yoo, Jae-Min; Jeong, Jinki; Yoo, Kyoungkeun; Lee, Jae-chun; Kim, Wonbaek

    2009-01-01

    Printed circuit boards incorporated in most electrical and electronic equipment contain valuable metals such as Cu, Ni, Au, Ag, Pd, Fe, Sn, and Pb. In order to employ a hydrometallurgical route for the recycling of valuable metals from printed circuit boards, a mechanical pre-treatment step is needed. In this study, the metallic components from waste printed circuit boards have been enriched using a mechanical separation process. Waste printed circuit boards shredded to 5.0 mm. The fractions of milled printed circuit boards of size 5.0 mm fraction and the heavy fraction were subjected to two-step magnetic separation. Through the first magnetic separation at 700 Gauss, 83% of the nickel and iron, based on the whole printed circuit boards, was recovered in the magnetic fraction, and 92% of the copper was recovered in the non-magnetic fraction. The cumulative recovery of nickel-iron concentrate was increased by a second magnetic separation at 3000 Gauss, but the grade of the concentrate decreased remarkably from 76% to 56%. The cumulative recovery of copper concentrate decreased, but the grade increased slightly from 71.6% to 75.4%. This study has demonstrated the feasibility of the mechanical separation process consisting of milling/size classification/gravity separation/two-step magnetic separation for enriching metallic components such as Cu, Ni, Al, and Fe from waste printed circuit boards

  3. Dynamic Stock Market Participation of Households with Heterogeneous Participation Costs

    DEFF Research Database (Denmark)

    Khorunzhina, Natalia

    This paper develops and estimates a dynamic model of stock market participation, where consumers’ decisions regarding stock market participation are influenced by participation costs. The practical significance of the participation costs is considered as being a channel through which financial...... education programs can affect consumers’ investment decisions. Using household data from the Panel Study of Income Dynamics, I estimate the magnitude of the participation cost, allowing for individual heterogeneity in it. The results show the average stock market participation cost is about 5% of labor...... income; however, it varies substantially over consumers’ life. The model successfully predicts the level of the observed participation rate and the increasing pattern of stock market participation over the consumers’ life cycle....

  4. Electronic Commerce and Electronic Business

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    This special issue is motivated by the recent upsurge of research activity in the areas of electronic commerce and electronic business both in India and all over the world. The current research activity is quite intensive in the use of mathematical tools such as cryptography, game theory, mechanism design, optimization, ...

  5. Electronic identity

    CERN Document Server

    de Andrade, Norberto Nuno Gomes; Argles, David

    2014-01-01

    With the increasing availability of electronic services, security and a reliable means by which identity is verified is essential.Written by Norberto Andrade the first chapter of this book provides an overview of the main legal and regulatory aspects regarding electronic identity in Europe and assesses the importance of electronic identity for administration (public), business (private) and, above all, citizens. It also highlights the role of eID as a key enabler of the economy.In the second chapter Lisha Chen-Wilson, David Argles, Michele Schiano di Zenise and Gary Wills discuss the user-cent

  6. Electronic diagrams

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Diagrams is a ready reference and general guide to systems and circuit planning and in the preparation of diagrams for both newcomers and the more experienced. This book presents guidelines and logical procedures that the reader can follow and then be equipped to tackle large complex diagrams by recognition of characteristic 'building blocks' or 'black boxes'. The goal is to break down many of the barriers that often seem to deter students and laymen in learning the art of electronics, especially when they take up electronics as a spare time occupation. This text is comprised of nin

  7. Digital electronics

    CERN Document Server

    Morris, John

    2013-01-01

    An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

  8. Starting electronics

    CERN Document Server

    Brindley, Keith

    2005-01-01

    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

  9. Polymer electronics

    CERN Document Server

    Geoghegan, Mark

    2013-01-01

    Polymer electronics is the science behind many important new developments in technology, such as the flexible electronic display (e-ink) and many new developments in transistor technology. Solar cells, light-emitting diodes, and transistors are all areas where plastic electronics is likely to, or is already having, a serious impact on our daily lives. With polymer transistors and light-emitting diodes now being commercialised, there is a clear need for a pedagogic text thatdiscusses the subject in a clear and concise fashion suitable for senior undergraduate and graduate students. The content

  10. Stretchable electronics

    CERN Document Server

    Someya, Takao

    2012-01-01

    With its comprehensive coverage this handbook and ready reference brings together some of the most outstanding scientists in the field to lay down the undisputed knowledge on how to make electronics stretchable.As such, it focuses on gathering and evaluating the materials, designs, models and technologies that enable the fabrication of fully elastic electronic devices which can sustain high strain. Furthermore, it provides a review of those specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices and sensors. In addition to stre

  11. Ultrafast gating of a mid-infrared laser pulse by a sub-pC relativistic electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Cesar, D. B.; Musumeci, P. [Department of Physics and Astronomy, UCLA, Los Angeles, California 90095 (United States); Alesini, D. [INFN-LNF, Via E. Fermi, 40, 00044 Frascati, Roma (Italy)

    2015-12-21

    In this paper we discuss a relative time-of-arrival measurement scheme between an electron beam and a mid-infrared laser pulse based on the electron-beam controlled transmission in semiconductor materials. This technique can be used as a time-stamping diagnostic in ultrafast electron diffraction or microscopy. In particular, our characterization of Germanium demonstrates that sub-ps time-of-arrival sensitivity could be achieved in a single shot and with very low charge beams (<1 pC). Detailed measurements as a function of the beam charge and the laser wavelength offer insights on the free carrier dynamics in the semiconductor upon excitation by the electron beam.

  12. Electronic Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten

    2009-01-01

    Electronic voting technology is a two edged sword. It comes with many risks but brings also many benefits. Instead of flat out rejecting the technology as uncontrollably dangerous, we advocate in this paper a different technological angle that renders electronic elections trustworthy beyond...... the usual levels of doubt. We exploit the trust that voters currently have into the democratic process and model our techniques around that observation accordingly. In particular, we propose a technique of trace emitting computations to record the individual steps of an electronic voting machine...... for a posteriori validation on an acceptably small trusted computing base. Our technology enables us to prove that an electronic elections preserves the voter’s intent, assuming that the voting machine and the trace verifier are independent....

  13. Electron Scattering

    International Nuclear Information System (INIS)

    Li, Xiaodong; Lee, Kyong Sei; Shaw, J.J.; Bahri, C.

    1990-01-01

    Electron scattering is one of the best probes available to us to probe the nucleus. It has revealed to us, with unprecedented accuracy, the charge and current distributions of nuclei. It has provided us with positive evidence for meson exchange currents. It was used to 'discover' the quark and it revealed to us that nucleons may be modified in the nuclear environment (EMC Effect). In short, electron scattering has revolutionized the study of nuclear physics. Several recent developments will insure that electron beams which will soon become availabe at CEBAF, Bates and elsewhere will make high-precision coincidence experiments possible. As the technology is becoming available, we are just beginning to exploit polarization degrees of freedom in our experiments. In this paper, we will introduce the formalism of electron scattering, review what we have learned in the past and look ahead toward the future

  14. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  15. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Electronic plants

    Science.gov (United States)

    Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

    2015-01-01

    The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

  17. Electron Emitters

    National Research Council Canada - National Science Library

    Tzeng, Yonhua

    2002-01-01

    When two carbon-nanotube coated electrodes are placed at a small distance from each other, electron emission from carbon nanotubes allows a DC or AC electrical current to flow between these two electrodes...

  18. Electron Microprobe

    Data.gov (United States)

    Federal Laboratory Consortium — The JEOL JXA-8600 is a conventional hairpin filament thermal emission electron microprobe that is more than 20 years old. It is capable of performing qualitative and...

  19. Electronic spectroscopies

    OpenAIRE

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is directly chemical since the outer shell electrons of the TMI are probed and provide information about the oxidation state and coordination environment of TMI on surfaces. Furthermore, the DRS technique ca...

  20. Electronic commerce

    OpenAIRE

    Zvolánková, Pavla

    2010-01-01

    The thesis deals with a description of electronic commerce from its beginning up to present situation in this area. It explains basic terms connected with electronic commerce and it summarizes the relevant legislation. Moreover it describes e-contracts and rights and duties of both contractual parties. The main view is the view of Internet retailer, which is reflected in the practical part focused on concrete problems of retailers.

  1. Spin Electronics

    Science.gov (United States)

    2003-08-01

    applications, a ferromagnetic metal may be used as a source of spin-polarized electronics to be injected into a semiconductor, a superconductor or a...physical phenomena in II-VI and III-V semiconductors. In II-VI systems, the Mn2+ ions act to boost the electron spin precession up to terahertz ...conductors, proximity effect between ferromagnets and superconductors , and the effects of spin injection on the physical properties of the

  2. Labor Education and Organizational Participation

    Science.gov (United States)

    Roberts, Higdon C., Jr.

    1976-01-01

    Most of the leadership throughout the labor movement have been concerned about the lack of rank and file participation in labor unions. An evaluation of the relationship of labor education and union participation is explored. (WL)

  3. Social Participation and Hours Worked

    OpenAIRE

    Stefano Bartolini; Ennio Bilancini

    2011-01-01

    We investigate the relationship between social participation and the hours worked in the market. Social participation is the component of social capital that measures individuals? engagement in groups, associations and non-governmental organizations. We provide a model of consumer choice where social participation may be either a substitute or a complement to material consumption ? depending on whether participation is instrumentally or non-instrumentally motivated ? and where a local environ...

  4. Nurses' Journey Toward Genuine Participation

    DEFF Research Database (Denmark)

    Østergaard, Kija Lin; Simonsen, Jesper; Karasti, Teija Helena

    2016-01-01

    This paper contributes to the ongoing debate on participation in Participatory Design (PD) by drawing on the notion of genuine participation [8]. It clarifies nurses' empirical journey as one of becoming and learning [1, 6], where they move from being reluctant participants, attending only becaus...

  5. [Discussion paper on participation and participative methods in gerontology].

    Science.gov (United States)

    Aner, Kirsten

    2016-02-01

    The concept of "participation" and the demand for the use of "participative methods" in human, healthcare, nursing and gerontological research as well as the corresponding fields of practice are in great demand; however, the targets and organization of "participation" are not always sufficiently explicated. The working group on critical gerontology of the German Society of Gerontology and Geriatrics uses this phenomenon as an opportunity for positioning and develops a catalogue of criteria for reflection and assessment of participation of elderly people in science and practice, which can also be considered a stimulus for further discussions.

  6. Spin electronics

    CERN Document Server

    Buhrman, Robert; Daughton, James; Molnár, Stephan; Roukes, Michael

    2004-01-01

    This report is a comparative review of spin electronics ("spintronics") research and development activities in the United States, Japan, and Western Europe conducted by a panel of leading U.S. experts in the field. It covers materials, fabrication and characterization of magnetic nanostructures, magnetism and spin control in magnetic nanostructures, magneto-optical properties of semiconductors, and magnetoelectronics and devices. The panel's conclusions are based on a literature review and a series of site visits to leading spin electronics research centers in Japan and Western Europe. The panel found that Japan is clearly the world leader in new material synthesis and characterization; it is also a leader in magneto-optical properties of semiconductor devices. Europe is strong in theory pertaining to spin electronics, including injection device structures such as tunneling devices, and band structure predictions of materials properties, and in development of magnetic semiconductors and semiconductor heterost...

  7. Participation

    African Journals Online (AJOL)

    chifaou.amzat

    2011-08-02

    Aug 2, 2011 ... that were once thought to be exogenous to policy choices. However, there is still little theorising about those on the other side of the policy equation. .... the project according to the assets of money, health and education available to them. There were people whose age (and attendant health concerns and.

  8. Consumer protection in electronic commerce

    Directory of Open Access Journals (Sweden)

    Nicoleta Andreea NEACŞU

    2016-07-01

    Full Text Available Electronic commerce is one of the most important aspects of the Internet and allows people to buy instant. Fast and easy development of e-commerce has led to the necessity of consumer protection in cyberspace, where trade takes place, so as to ensure consumer safety and security matters. This article examines e-commerce in terms of consumer protection and data security, which concerns equally all stakeholders in the electronic market: buyers, sellers, banks, courier cargo and other participants.

  9. Towards tailor-made participation

    DEFF Research Database (Denmark)

    Agger, Annika

    2012-01-01

    Public participation has become an important element of governance in many Western European countries. However, among scholars and practitioners there is a recognition that participatory governance processes tend to produce systematic exclusions. Knowledge about 'who' participates and 'how......' they participate can enhance our understanding of participatory processes. This paper presents some characterisations of citizens based on a review of the literature on participation. In addition, examples of how to tailor participation for different type of citizens are provided based on studies of urban...... regeneration programmes and local environmental initiatives in Denmark. The paper concludes that in order to broaden the inclusion of affected citizens, public authorities need to be tailor participation processes by applying distinct approaches to different types of citizens...

  10. Researching participation in adult education

    DEFF Research Database (Denmark)

    Kondrup, Sissel

    to and participation in adult education and training focusing primarily on unskilled and low skilled workers. I present how the traditions contribute to the perception of what effects participation and argue that the existing traditions must be extended and a new framework must be applied in order to understand how......It is a widespread perception that the challenge of increasing participation in adult education and training has intensified due to the transformation from industrial to knowledge based societies and the transformation implies that it becomes pivotal to increase the supply of highly qualified...... labour. This has fostered an interest in examining why and how people engage in adult education, how participation and especially non-participation in adult education can be explained and how participation rates can be increased. In this paper I outline different traditions within research on recruitment...

  11. Citizen participation in public accountability

    DEFF Research Database (Denmark)

    Damgaard, Bodil; Lewis, Jenny

    2014-01-01

    In this chapter we offer an analytical framework sensitive to the quality of citizen participation, which is measured in terms of transferred power from the governors to the citizens, and in terms of the degree to which citizens have access to accountability measures. We do this by combining...... Arnstein’s (1969) classic ladder of participation with a focus on citizen participation in regard to bureaucratic accountability, centered on efficiency and learning (cf. Bovens et al. 2008)....

  12. Electronic spectroscopies

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is

  13. Greening Electronics

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Søes Kokborg, Morten; Thomsen, Marianne

    Based on a literature review with focus on hazardous substances in waste electric and electronic equipment (WEEE) and numbers from a Danish treatment facility a flow analysis for specific substances has been conducted. Further, the accessible knowledge on human and environmental effects due to po...

  14. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e...

  15. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... applications of internet are exchange of electronic mail, ex- change of files (text as well as multimedia), storing information in a form which allows other computers connected to the internet to access it and remote logging into a computer and using it to run programs. For two computers in different locations to.

  16. Nuclear electronics

    International Nuclear Information System (INIS)

    Friese, T.

    1981-09-01

    A short survey is given on nuclear radiation detectors and nuclear electronics. It is written for newcomers and those, who are not very familiar with this technique. Some additional information is given on typical failures in nuclear measurement systems. (orig.) [de

  17. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    Power electronics plays an important role in the processing, conditioning and utilization of electric power. From ubiquitous ... An induction motor drive based on a modular multilevel converter (MMC) is presented ... dynamic voltage restorer and the control of an induction motor drive having an active front end converter.

  18. Electronic Money.

    Science.gov (United States)

    Schilling, Tim

    Thirty years ago a cashless society was predicted for the near future; paper currency and checks would be an antiquated symbol of the past. Consumers would embrace a new alternative for making payments: electronic money. But currency is still used for 87% of payments, mainly for "nickel and dime" purchases. And checks are the payment…

  19. Electronics department

    International Nuclear Information System (INIS)

    1979-01-01

    This report summarizes the activities in 1978 of some of the groups within the Electronics Department. The work covered includes plant protection and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  20. Electronic Commerce

    Indian Academy of Sciences (India)

    nance, Vol.6, No.2, 6-13, 2001. SERIES I ARTICLE. Electronic Commerce. 5. Cash Transactions. V Rajaraman. In this article we will discuss payment by cash for e-com- merce transactions and micro payments for services re- ceived via the internet. Introduction. In the previous part, we discussed payment by credit cards and.

  1. Cryogenic electronics

    Energy Technology Data Exchange (ETDEWEB)

    Fourches, N.; Abbon, P.; Delagnes, E.; Le Meur, L.P.

    1995-04-01

    This study presents the cryogenic electronics, which is used in high energy physics with appropriate device. It discuss their ability to hardening against ionization radiation and neutrons. Some partial results on the operation of microelectronics devices at cryogenic temperature are given. (TEC). 33 refs., 13 figs.

  2. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... Electronic Commerce. 2. E-Commerce System Architecture. V Rajaraman is with the. J awaharlal Nehru Centre for Advanced Scientific. Research and the Indian. Institute of Science,. Bangalore. Several generations of scientists and engineers in India have learnt computer science using his lucidly.

  3. Electronic Commerce

    Indian Academy of Sciences (India)

    In the first part of this series we stated that in business to business e-commerce, electronic documents are exchanged be- tween business partners by using either a private network or a public switched network. We also stated that in order to inter- pret them correctly we need a standard notation which is agreed to by both ...

  4. Age profiles of sport participants.

    Science.gov (United States)

    Eime, Rochelle M; Harvey, Jack T; Charity, Melanie J; Casey, Meghan M; Westerbeek, Hans; Payne, Warren R

    2016-01-01

    Participation in sport has many health benefits, and is popular amongst children. However participation decreases with age. While the membership records of peak sports organisations have improved markedly in recent years, there has been little research into sport participation trends across the lifespan. This study investigates age profiles of participation in sport and compares these trends between genders and residential locations. De-identified 2011 participant registration data for seven popular Australian sports (Australian Football, Basketball, Cricket, Hockey, Lawn Bowls, Netball and Tennis) were obtained and analysed according to age, gender and geographical location (metropolitan v non-metropolitan) within the state of Victoria, Australia. All data were integrated and sports were analysed collectively to produce broadly based participation profiles while maintaining confidentiality of membership data for individual sports. The total number of registered participants included in the data set for 2011 was 520,102. Most participants (64.1 %) were aged less than 20 years. Nearly one third (27.6 %) of all participants were aged 10-14 years, followed by the 5-9 year age group (19.9 %). Participation declined rapidly during adolescence. A higher proportion of males than female participants were young children (4-7 years) or young adults 18-29 years; this pattern was reversed among 8-17 year-olds. A higher proportion of metropolitan participants were engaged between the ages of 4-13 and 19-29, whereas a higher proportion of non-metropolitan participants played during adolescence (14-18 years) and throughout mature adulthood (30+ years). Increasing participation in sport is an objective for both government and sporting organisations. In order to have both mass population-based participation, from a health policy and elite performance perspective, we need to further explore the findings arising from the analysis of this extensive data set. Such an examination

  5. Scheduling participants of Assessment Centres

    DEFF Research Database (Denmark)

    Lysgaard, Jens; Løber, Janni

      Assessment Centres are used as a tool for psychologists and coaches to observe a number of dimensions in a person's behaviour and test his/her potential within a number of chosen focus areas. This is done in an intense course, with a number of different exercises which expose each participant......'s ability level in the chosen focus areas. The participants are observed by assessors with the purpose of gathering material for reaching a conclusion on each participant's personal profile. We consider the particular case that arises at the company Human Equity (www.humanequity.dk), where Assessment...

  6. Electronic Health Object

    Science.gov (United States)

    Almunawar, Mohammad Nabil; Anshari, Muhammad; Younis, Mustafa Z.; Kisa, Adnan

    2015-01-01

    Electronic health records (EHRs) store health-related patient information in an electronic format, improving the quality of health care management and increasing efficiency of health care processes. However, in existing information systems, health-related records are generated, managed, and controlled by health care organizations. Patients are perceived as recipients of care and normally cannot directly interact with the system that stores their health-related records; their participation in enriching this information is not possible. Many businesses now allow customers to participate in generating information for their systems, strengthening customer relationships. This trend is supported by Web 2.0, which enables interactivity through various means, including social networks. Health care systems should be able to take advantage of this development. This article proposes a novel framework in addressing the emerging need for interactivity while preserving and extending existing electronic medical data. The framework has 3 dimensions of patient health record: personal, social, and medical dimensions. The framework is designed to empower patients, changing their roles from static recipient of health care services to dynamic and active partners in health care processes. PMID:26660486

  7. Electronic detectors for electron microscopy.

    Science.gov (United States)

    Faruqi, A R; McMullan, G

    2011-08-01

    Electron microscopy (EM) is an important tool for high-resolution structure determination in applications ranging from condensed matter to biology. Electronic detectors are now used in most applications in EM as they offer convenience and immediate feedback that is not possible with film or image plates. The earliest forms of electronic detector used routinely in transmission electron microscopy (TEM) were charge coupled devices (CCDs) and for many applications these remain perfectly adequate. There are however applications, such as the study of radiation-sensitive biological samples, where film is still used and improved detectors would be of great value. The emphasis in this review is therefore on detectors for use in such applications. Two of the most promising candidates for improved detection are: monolithic active pixel sensors (MAPS) and hybrid pixel detectors (of which Medipix2 was chosen for this study). From the studies described in this review, a back-thinned MAPS detector appears well suited to replace film in for the study of radiation-sensitive samples at 300 keV, while Medipix2 is suited to use at lower energies and especially in situations with very low count rates. The performance of a detector depends on the energy of electrons to be recorded, which in turn is dependent on the application it is being used for; results are described for a wide range of electron energies ranging from 40 to 300 keV. The basic properties of detectors are discussed in terms of their modulation transfer function (MTF) and detective quantum efficiency (DQE) as a function of spatial frequency.

  8. Evaluating the benefits of vaccination when used in combination with stamping-out measures against hypothetical introductions of foot-and-mouth disease into New Zealand: a simulation study.

    Science.gov (United States)

    Sanson, R L; Rawdon, T; Owen, K; Hickey, K; van Andel, M; Yu, Z D

    2017-05-01

    To evaluate the benefits of vaccination against simulated outbreaks of foot-and-mouth disease (FMD) in New Zealand, when applied as an additional measure to stamping-out. A simulation modelling approach was used. The study population comprised all known farms in New Zealand with FMD-susceptible livestock. Infection was seeded into three different areas of New Zealand. Transmission mechanisms included direct and indirect contacts, local spread and airborne spread. Efficacies of some of the stamping-out measures were varied. Vaccination strategies involved different start times, size and type of vaccination zone, and species vaccinated. Personnel resources for vaccination were varied as was the herd immunity profile following vaccination. Altogether, 336 models were specified, with 100 iterations conducted for each model. Generalised linear modelling and boosted regression trees were used to evaluate which variables had the biggest effect on the number of infected premises (IP), epidemic duration and area under control. Vaccination, when used as an adjunct to the standard stamping-out programme, significantly reduced the outbreak size. Vaccination reduced the median number of IP by 26 (95% CI=18-35), epidemic duration by 16 (95% CI=13-19) days and area under control by 474 (95% CI=250-699) km 2 when there was no airborne spread; and when there was airborne spread the median reduction was 87 (95% CI=70-105) IP, 32 (95% CI=28-35) days and 898 (95% CI=665-1139) km 2 , respectively. Multivariable analyses showed that starting vaccination 11 days after first detection of FMD produced greater benefits than starting 16 or 21 days after detection. Increasing vaccination zones resulted in increased benefits. Boosted regression tree analyses showed that the most influential variables on the outcome measures were interval to first detection, incursion location, whether there was airborne spread or not and herd immunity profile. This study showed that there are benefits to

  9. Evaluation of the Possibility of Performing Cold Backward Extrusion of Axisymmetrical Thinwalled Aluminum Die Stampings with Square Section / Ocena Możliwości Wyciskania Przeciwbieżnego Na Zimno Osiowosymetrycznych Wyprasek Z Cienką Ścianką O Przekroju Kwadratowym Z Aluminium

    Directory of Open Access Journals (Sweden)

    Miłek T.

    2015-12-01

    Full Text Available The paper presents evaluation of the possibility of performing cold backward extrusion of axisymmetrical thin-walled aluminum (Al 99.50, ENAW-1050A die stampings with a square section at the strain ε=ln(A0/A1=2 (where A0 - cross sectional area of the billet, A1 - cross sectional area of the die stamping, and the ratio h1/b=3.6 (where h1 - height of the die stamping in mm, b - width of the base of the die stamping in mm. The analysis was conducted on the basis of the results of computer modelling (FEM and experimental investigations on backward extrusion. The boundary conditions for numerical calculations were determined experimentally with respect to the flow curve and mechanical properties of aluminum. The results of investigations into backward extrusion of thin-walled square-sectioned aluminum die stampings might be used as guidelines to develop a technological process for industrial practice.

  10. Possible Extent and Depth of Salt Contamination in Ground Water Using Geophysical Techniques, Red River Aluminum Site, Stamps, Arkansas, April 2003

    Science.gov (United States)

    Stanton, Gregory P.; Kress, Wade; Hobza, Christopher M.; Czarnecki, John B.

    2003-01-01

    A surface-geophysical investigation of the Red River Aluminum site at Stamps, Arkansas, was conducted in cooperation with the Arkansas Department of Environmental Quality to determine the possible extent and depth of saltwater contamination. Water-level measurements indicate the distance to water level below land surface ranges from about 1.2 to 3.9 feet (0.37 to 1.19 meters) in shallow monitor wells and about 10.5 to 17.1 feet (3.20 to 5.21 meters) in deeper monitoring wells. The two-dimensional, direct-current resistivity method identified resistivities less than 5 ohm-meters which indicated possible areas of salt contamination occurring in near-surface or deep subsurface ground water along four resistivity lines within the site. One line located east of the site yielded data that demonstrated no effect of salt contamination. Sections from two of the five data sets were modeled. The input model grids were created on the basis of the known geology and the results and interpretations of borehole geophysical data. The clay-rich Cook Mountain Formation is modeled as 25 ohm-meters and extends from 21 meters (68.9 feet) below land surface to the bottom of the model (about 52 meters (170.6 feet)). The models were used to refine interpretation of the resistivity data and to determine extent of saltwater contamination and depth to the Cook Mountain Formation. Data from the resistivity lines indicate both near-surface and subsurface saltwater contamination. The near-surface contamination appears as low resistivity (less than 5 ohm-meters) on four of the five resistivity lines, extending up to 775 meters (2,542.8 feet) horizontally in a line that traverses the entire site south to north. Model resistivity data indicate that the total depth of saltwater contamination is about 18 meters (59 feet) below land surface. Data from four resistivity lines identified areas containing low resistivity anomalies interpreted as possible salt contamination. A fifth line located just east

  11. Participant observation in risk problems

    NARCIS (Netherlands)

    Andriessen, H.; Kluin, M.H.A.; Van Gulijk, C.; Ale, B.J.M.

    2012-01-01

    Participant observation is a method to collect information through active participation in the social world that is under study, in this case two different risk-related working areas where confidentiality and secrecy are paramount. In reality there is a difference between what people do and say they

  12. Efficiency of participation in planning

    Directory of Open Access Journals (Sweden)

    Ghada Farouk Hassan

    2011-06-01

    A comparison between the two processes will take place in order to indentify the participation activities and their real efficiency. The comparison will be focused on the parameter of participation realized in each case in order to find gaps that have negative effects and needs to be filled.

  13. The Transformation of Employee Participation

    DEFF Research Database (Denmark)

    Busck, Ole Gunni; Knudsen, Herman; Lind, Jens

    2010-01-01

    -model. However, more recent research into psychosocial work environment problems questions the model’s assumption of high job control compensating for high job demands. Taking its point of departure in a `deconstruction´ of the concept of participation based on research on employee participation from the past...

  14. Youth Motivations for Program Participation

    Directory of Open Access Journals (Sweden)

    Jenifer K. McGuire

    2017-01-01

    Full Text Available Through their participation in youth programs, young people have access to opportunities to learn and build important skills. A total of 214 youth between the ages of 10-19 (mean 15.5 years completed an online survey about characteristics of youth programs they participated in, didn’t participate in, and had participated in but quit. We found that youth participated in activities that provided a benefit to meet personal goals or develop skills. However, our findings suggest that youth may leave activities, or never join them, based on different sets of motivations than the reasons they stay in activities. There was variability across demographic groups: Males reported more problems with past activities, sexual minority youth were more likely to endorse social problems with past and never joined activities, and ethnic minorities reported less support for personal goals and connection to adults in current activities and more logistic barriers for activities never joined.

  15. Examining Big Brother's Purpose for Using Electronic Performance Monitoring

    Science.gov (United States)

    Bartels, Lynn K.; Nordstrom, Cynthia R.

    2012-01-01

    We examined whether the reason offered for electronic performance monitoring (EPM) influenced participants' performance, stress, motivation, and satisfaction. Participants performed a data-entry task in one of five experimental conditions. In one condition, participants were not electronically monitored. In the remaining conditions, participants…

  16. Molecular Electronics

    DEFF Research Database (Denmark)

    Jennum, Karsten Stein

    This thesis includes the synthesis and characterisation of organic compounds designed for molecular electronics. The synthesised organic molecules are mainly based on two motifs, the obigo(phenyleneethynylenes) (OPE)s and tetrathiafulvalene (TTF) as shown below. These two scaffolds (OPE and TTF......) are chemically merged together to form cruciform-like structures that are an essential part of the thesis. The cruciform molecules were subjected to molecular conductance measurements to explore their capability towards single-crystal field-effect transistors (Part 1), molecular wires, and single electron...... transistors (Part 2). The synthetic protocols rely on stepwise Sonogashira coupling reactions. Conductivity studies on various OPE-based molecular wires reveal that mere OPE compounds have a higher electrical resistance compared to the cruciform based wires (up to 9 times higher). The most spectacular result...

  17. Automotive electronics

    Energy Technology Data Exchange (ETDEWEB)

    Basshuysen, R. van [ed.; Baun, R. [comp.

    2000-10-01

    Electronic equipment is indispensable in modern motor cars for active and passive safety, exhaust and consumption monitoring or comfort. Electric and electronic systems today account for nearly 20 percent of the production cost of a normal passenger car, with an upward trend. Infotainment equipment is a growing market, which gets center stage in this issue. Further subjects discussed are current electronic and mechatronic applications as well as new developments in data transmission, development tools and constructional elements. [German] Ohne Elektronik sind moderne Automobile nicht mehr vorstellbar. Ob aktive oder passive Sicherheit, Abgas, Verbrauch oder Komfort - der Fortschritt im Autombil ist eng verknuepft mit der Einfuehrung neuer elektronischer Systeme und Komponenten. Obwohl meist nicht sehr auffaellig in einer Black-box verpackt, liegen die anteiligen Herstellungskosten fuer die Elektrik und Elektronik bei einem Mittelklassefahrzeug schon bei knapp 20 Prozent. Tendenz: Weiter steigend. Waehrend die Segnungen von ABS, ESP oder Motormanagement fuer den Kunden unsichtbar bleiben, tritt die Elektronik mit den Infotainment-Systemen ins Rampenlicht. Hochwertige Audio-Anlagen im Doppel-DIN-Format und grosse Farbbildschirme sitzen an prominenter Stelle im Armaturenbrett. Elektronische Systeme werden damit fuer den Kunden sichtbar, greifbar und erlebbar. Doch je mehr Funktionen integriert werden, desto wichtiger wird eine einfache Bedienung, die den Fahrer moeglichst wenig vom Verkehrsgeschehen ablenkt. Das ist leider keine Selbstverstaendlichkeit: Eine klare, einfache Bedienung wurde in der Vergangenheit schon bei so manchem simplen Cassetten-Radio schmerzlich vermisst. Infotainment im Automobil ist ein Wachstumsmarkt - und das Schwerpunkt-Thema der vorliegenden zweiten Ausgabe von 'Automotive Electronics'. Darueber hinaus beschaeftigt sich auch diese Ausgabe mit aktuellen Elektronik- und Mechatronik-Anwendungen und berichtet ueber neue Entwicklungen

  18. Electronic Aggression

    Centers for Disease Control (CDC) Podcasts

    2007-11-20

    Aggression is no longer limited to the school yard. New forms of electronic media, such as blogs, instant messaging, chat rooms, email, text messaging, and the internet are providing new arenas for youth violence to occur.  Created: 11/20/2007 by National Center for Injury Prevention and Control, Division of Violence Prevention.   Date Released: 11/28/2007.

  19. ELECTRON GUN

    Science.gov (United States)

    Christofilos, N.C.; Ehlers, K.W.

    1960-04-01

    A pulsed electron gun capable of delivering pulses at voltages of the order of 1 mv and currents of the order of 100 amperes is described. The principal novelty resides in a transformer construction which is disposed in the same vacuum housing as the electron source and accelerating electrode structure of the gun to supply the accelerating potential thereto. The transformer is provided by a plurality of magnetic cores disposed in circumferentially spaced relation and having a plurality of primary windings each inductively coupled to a different one of the cores, and a helical secondary winding which is disposed coaxially of the cores and passes therethrough in circumferential succession. Additional novelty resides in the disposition of the electron source cathode filament input leads interiorly of the transformer secondary winding which is hollow, as well as in the employment of a half-wave filament supply which is synchronously operated with the transformer supply such that the transformer is pulsed during the zero current portions of the half-wave cycle.

  20. Sports participation with arachnoid cysts.

    Science.gov (United States)

    Strahle, Jennifer; Selzer, Béla J; Geh, Ndi; Srinivasan, Dushyanth; Strahle, MaryKathryn; Martinez-Sosa, Meleine; Muraszko, Karin M; Garton, Hugh J L; Maher, Cormac O

    2016-04-01

    OBJECT There is currently no consensus on the safety of sports participation for patients with an intracranial arachnoid cyst (AC). The authors' goal was to define the risk of sports participation for children with this imaging finding. METHODS A survey was prospectively administered to 185 patients with ACs during a 46-month period at a single institution. Cyst size and location, treatment, sports participation, and any injuries were recorded. Eighty patients completed at least 1 subsequent survey following their initial entry into the registry, and these patients were included in a prospective registry with a mean prospective follow-up interval of 15.9 ± 8.8 months. RESULTS A total 112 patients with ACs participated in 261 sports for a cumulative duration of 4410 months or 1470 seasons. Of these, 94 patients participated in 190 contact sports for a cumulative duration of 2818 months or 939 seasons. There were no serious or catastrophic neurological injuries. Two patients presented with symptomatic subdural hygromas following minor sports injuries. In the prospective cohort, there were no neurological injuries CONCLUSIONS Permanent or catastrophic neurological injuries are very unusual in AC patients who participate in athletic activities. In most cases, sports participation by these patients is safe.

  1. Mediated Discourses of Transnational Participation

    DEFF Research Database (Denmark)

    Zhukova Klausen, Julia

    2013-01-01

    The paper deals with the social and discursive aspects of transnational living and participation. By introducing the notion of transnational networking it articulates transnational participation as a type of social and discursive connecting through which places, practices, aspects of identities...... national and cultural memberships and demonstrates how transnational participation is organized not from one national terrain to anbother but across diverse social and discursive practices....... become represented, categorized and enacted across and beyond symbolic and geo-political national terrains. The multimodal, social-semiotic, discourse analysis focuses on semiotic shifts and discursive transformations through which the actors categorize symbols, artefacts and accounts across and beyond...

  2. Experiment search of the electroweak symmetry breaking in the H {yields} {gamma}{gamma} channel and of a solution of the hierarchy problem in the Atlas experiment: participation to the tests of the electronics of the electromagnetic calorimeter; Recherche experimentale de la brisure spontanee de symetrie electrofaible dans le canal H {yields} {gamma}{gamma} et d'une solution au probleme de hierarchie dans ATLAS. Participation a la preparation de l'electronique du calorimetre electromagnetique

    Energy Technology Data Exchange (ETDEWEB)

    Escalier, M

    2005-04-15

    This thesis deals with the understanding of the spontaneous electroweak symmetry breaking mechanism in the ATLAS experiment at LHC collider, by studying two complementary topics: the search for the Higgs boson in the H {yields} {gamma}{gamma} channel, and a search for extra dimensions in the gluon sector. Tests of the electronic of the electromagnetic calorimeter allowed us to validate various cards that were under the responsibility of the LPNHE. Using full simulation data of the detector allowed us to precisely compute mass resolution of the di-photon system. Due to recent theoretical improvements, signal and background have been studied at the next order of the perturbative development, which increases cross-sections. With regards to the jet background, a study has been done using discriminating variables in order to obtain, for a 80 % photons efficiency, a rejection factor of 7000. The discovery potential benefits from this change of cross-sections and increases by 50 % in comparison with the same analysis done at the leading order. In addition to this, a new analysis using a maximum likelihood method allowed us to increase by 40 % the discovery potential in comparison with our classical analysis. In conclusion, the Higgs boson of 120 GeV/c{sup 2} can be now discovered in this channel with an integrated luminosity of 10 fb{sup -1}. Furthermore, the consistency of the problem of the Higgs boson mass can be solved by introducing extra dimensions in which gluons can propagate. We have shown that it was possible to discover extra-dimensions up to a compactification scale of 15 TeV. (author)

  3. Remote Participation tools at TEXTOR

    International Nuclear Information System (INIS)

    Kraemer-Flecken, A.; Krom, J.; Landgraf, B.; Lambertz, H.T.

    2010-01-01

    Remote Participation is a widely used term with different meanings. In the fusion community it has gained an increasing interest with the shut down of small experiments and participation of associations in larger experiments. Also at TEXTOR Remote Participation becomes more and more important with an increasing number of collaborations. At TEXTOR we differentiate between active and passive remote experiment participation. In addition potential users of TEXTOR like to be involved in the experiment preparation phase where the experiment schedule and the availability of diagnostic systems is discussed as well. After an experiment joint groups of users like to share the results and communicate with each other. The final step in publishing the results is also made more transparent for the users in a twofold process. Using a web based pinboard to spread the publication within the user community allows an extensive and early discussion of the results.

  4. Advancing the measurement of participation.

    Science.gov (United States)

    Whiteneck, Gale G; Bogner, Jennifer A; Heinemann, Allen W

    2011-04-01

    The authors of 3 articles in this issue have collaborated in an effort to advance the conceptualization and measurement of participation. These articles offer (1) a new tool for measuring participation, the Participation Assessment with Recombined Tools-Objective (PART-O), which combines items from widely used instruments in traumatic brain injury rehabilitation research; (2) 2 methods of scoring 17 items of PART-O, assessing relatively objective social role performance and yielding 3 subscale scores, as well as 2 alternative total scores (including 1 incorporating the concept of balance among types of participation), and (3) 19 enfranchisement items assessing the degree to which people with disability perceive they have the freedom to engage in social roles of their choosing while being accepted and valued by others. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  5. Community consensus: Design beyond participation

    CSIR Research Space (South Africa)

    Winschiers-Theophilus, H

    2012-07-01

    Full Text Available is critical to design, and in particular, to cross-cultural design. Societies and groups based on other value systems conceptualize "participation" differently, and this understanding directly affects the intercultural design process. Thus, we explore...

  6. Detectors - Electronics

    International Nuclear Information System (INIS)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J.

    1998-01-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X → e - converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the 3 He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  7. ABOUT THE RELATIONSHIP BETWEEN THE ISSUES SIGN OF LANGUAGE SYSTEM AND STAMP OF LANGUAGE SYSTEM DİLİN İŞARET SİSTEMİYLE DİLİN DAMGA SİSTEMİ ARASINDAKİ MESELELERİN İLİŞKİSİ HAKKINDA

    Directory of Open Access Journals (Sweden)

    Bekmağanbetov ŞANJARHAN

    2012-01-01

    Full Text Available In this article, it is elaborated that ‘stamp system’ which is considered as one of basic issues of linguistics. Stamps of language and some particular features of these stamps are mentioned. In Turkish consideration, there are dimension, size of stamp and the stamp’s being profound and substantive. In modern linguistics, notion of stamp is used instead of notion znak ‘symbol’ in Russian, and notion sign ‘sign’ in English. In the article, after the explanation of the notion of UP (flat universe emerged with worldly basis, it is made mention that language is all associated with the stamp system(s. Bu makalede, genel dil bilimin temel konularından biri kabul edilen dilin ‘damga sistemi’ üzerinde durulmuştur. Dil damgalarından ve bu damgaların belli özelliklerinden söz edilmiştir. Türk’ün düşüncesinde damganın genişliği, büyüklüğü, derin ve anlamlı oluşu vardır. Çağdaş dil biliminde damga kavramı, Rusçada znak ‘simge’, İngilizcede sign ‘işaret’ kavramının yerine kullanılmaktadır. Makalede, dünyevî temel ile ortaya çıkan UP (âlem daire kavramı açıklandıktan sonra dilin damga/lar sistemi üzerine oturtulduğundan söz edilmiştir.

  8. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  9. Nuclear electronics

    International Nuclear Information System (INIS)

    Lucero B, E.

    1989-01-01

    The rapid technical development of Colombia over the past years, resulted among others, a considerable increase in the number of measuring instrumentation and testing laboratories, scientific research and metrology centers, in industry, agriculture, public health, education on the nuclear field, etc. IAN is a well organized institution with qualified management, trained staff and reasonably equipped laboratories to carry out tasks as: Metrology, standardization, quality control and maintenance and repair of nuclear instruments. The government of Colombia has adopted a policy to establish and operate through the country maintenance and repair facilities for nuclear instrumentation. This policy is reflected in the organization of electronic laboratories in Bogota-IAN

  10. Basic electronics

    CERN Document Server

    Tayal, DC

    2010-01-01

    The second edition of this book incorporates the comments and suggestions of my friends and students who have critically studied the first edition. In this edition the changes and additions have been made and subject matter has been rearranged at some places. The purpose of this text is to provide a comprehensive and up-to-date study of the principles of operation of solid state devices, their basic circuits and application of these circuits to various electronic systems, so that it can serve as a standard text not only for universities and colleges but also for technical institutes. This book

  11. Assessing Cycling Participation in Australia

    Directory of Open Access Journals (Sweden)

    Chris Rissel

    2013-01-01

    Full Text Available Planning and evaluating cycling programs at a national or state level requires accurate measures of cycling participation. However, recent reports of cycling participation have produced very different estimates. This paper examines the reported rates of cycling in five recent population surveys of cycling. Three surveys (one national and two from Sydney asking respondents when they last rode a bicycle generated cycling participation (cycled in the past year estimates of 29.7%, 34.1% and 28.9%. Two other national surveys which asked participants to recall (unprompted any physical activity done for exercise, recreation or sport in the previous 12 months, estimated cycling in the past year as 11.1% and 6.5%. While unprompted recall of cycling as a type of physical activity generates lower estimates of cycling participation than specific recall questions, both assessment approaches produced similar patterns of cycling by age and sex with both approaches indicating fewer women and older adults cycling. The different question styles most likely explain the substantial discrepancies between the estimates of cycling participation. Some differences are to be expected due to sampling variability, question differences, and regional variation in cycling.

  12. CYBER HOSTILITIES: CIVILIAN DIRECT PARTICIPATION

    Directory of Open Access Journals (Sweden)

    Dan-Iulian VOITAȘEC

    2016-06-01

    Full Text Available The manner in which hostilities are being conducted has changed in recent years. The battle field has transpired beyond the physical realm and now has a virtual component. Because of this, it is now easier than ever for civilians to get involved in hostilities. International Humanitarian Law applies to all situations of armed conflict and according to the principle of distinction, the parties to the conflict must, at all times, distinguish between civilians and combatants. The problem arises when the line between combatants and civilians starts to get blurry. Direct civilian participation in hostilities has been addressed in both Additional Protocols to the Geneva Conventions of 1949 and in 2009 the International Committee of the Red Cross published the Interpretive guidance on the notion of Direct Participation in Hostilities under international humanitarian law. Another document that addresses the problem of civilian direct participation is the Tallinn Manual on the International Law Applicable to Cyber Warfare prepared by an international group of experts at the invitation of the NATO Cooperative Cyber Defence Centre of Excellence in 2013. The guide prepared by the ICRC addresses the problem of civilian direct participation during conventional situations of armed conflict, while the Tallinn Manual addresses direct participation in situations of cyber warfare. The purpose of this paper is to study the application of civilian direct participation to situations of cyber warfare.

  13. Participation objective, participation subjective: a measure of participation combining outsider and insider perspectives.

    Science.gov (United States)

    Brown, Margaret; Dijkers, Marcel P J M; Gordon, Wayne A; Ashman, Teresa; Charatz, Heather; Cheng, Zhifen

    2004-01-01

    Participation now replaces community integration or handicap as concepts reflecting the social and interpersonal aspects of disability. If rehabilitation is to adequately measure participation, new measures of participation are needed. To represent the voice of the consumer, such measures should reflect not just "objective," normative aspects, but also subjective ones, tapping the consumer's view of participation. To describe the development of and preliminary metrological information on a new measure of participation, Participation Objective, Participation Subjective (POPS). A total of 454 community-living individuals with traumatic brain injury (TBI) completed the POPS, as well as measures of quality of life (Life 3), depressive mood (BDI), and TBI symptoms (BISQ). The POPS requires reporting of the share of household activities performed, or the frequency or hours of nonhousehold activities. For each, the subject indicates whether he or she wants to perform more, the same, or less of the activity, and the importance of the activity to well-being. Five subscales and a total scale are calculated, for an objective component (PO), and a subjective component (PS) that reflects importance-weighted satisfaction with activity level. Individuals with mild TBI scored minimally higher than those with moderate-severe TBI on PO subscores, but desired more change on the PS. Test-retest reliability for the PO and the PS and the subscales was from weak (intraclass correlation coefficient 0.28) to adequate (0.89), with PS components having better reliability. The PS component scores had the expected correlations with TBI symptoms, depressed mood, and life satisfaction, among both those with mild injury and those with moderate-severe injury. Injury severity and time since onset were not related to PO or PS scores. The POPS shows promise as a measure of participation. It fills a void in that it reflects both insider and outsider perspectives on participation after TBI.

  14. Process Support for Increasing Participation in eParticipation

    Directory of Open Access Journals (Sweden)

    Edith Maier

    2010-04-01

    Full Text Available The lack of user acceptance of e-participation initiatives has been attributed to several factors, among them lack of motivation, poor transparency of process and lack of traceability of contributions. These deficits cannot be overcome by compliance with usability and accessibility guidelines. To increase user participation it is suggested to align such initiatives with the requirements of civil society groups who are more successful in mobilising public engagement and less with government requests. To enable and empower such groups to set up and maintain e-participation initiatives, a functional navigator for guiding users in configuring a platform as well as process support components are required. The latter focus on the transitions between different phases. The paper outlines how such an approach can be implemented to achieve a transparent circular flow of information and opinion between citizens and policy-makers in a collaborative environment which supports formal and informal political actors to work in partnership.

  15. Stretchable electronics for wearable and high-current applications

    Science.gov (United States)

    Hilbich, Daniel; Shannon, Lesley; Gray, Bonnie L.

    2016-04-01

    Advances in the development of novel materials and fabrication processes are resulting in an increased number of flexible and stretchable electronics applications. This evolving technology enables new devices that are not readily fabricated using traditional silicon processes, and has the potential to transform many industries, including personalized healthcare, consumer electronics, and communication. Fabrication of stretchable devices is typically achieved through the use of stretchable polymer-based conductors, or more rigid conductors, such as metals, with patterned geometries that can accommodate stretching. Although the application space for stretchable electronics is extensive, the practicality of these devices can be severely limited by power consumption and cost. Moreover, strict process flows can impede innovation that would otherwise enable new applications. In an effort to overcome these impediments, we present two modified approaches and applications based on a newly developed process for stretchable and flexible electronics fabrication. This includes the development of a metallization pattern stamping process allowing for 1) stretchable interconnects to be directly integrated with stretchable/wearable fabrics, and 2) a process variation enabling aligned multi-layer devices with integrated ferromagnetic nanocomposite polymer components enabling a fully-flexible electromagnetic microactuator for large-magnitude magnetic field generation. The wearable interconnects are measured, showing high conductivity, and can accommodate over 20% strain before experiencing conductive failure. The electromagnetic actuators have been fabricated and initial measurements show well-aligned, highly conductive, isolated metal layers. These two applications demonstrate the versatility of the newly developed process and suggest potential for its furthered use in stretchable electronics and MEMS applications.

  16. Seasonal variation in sports participation.

    Science.gov (United States)

    Schüttoff, Ute; Pawlowski, Tim

    2018-02-01

    This study explores indicators describing socio-demographics, sports participation characteristics and motives which are associated with variation in sports participation across seasons. Data were drawn from the German Socio-Economic Panel which contains detailed information on the sports behaviour of adults in Germany. Overall, two different measures of seasonal variation are developed and used as dependent variables in our regression models. The first variable measures the coefficient of (seasonal) variation in sport-related energy expenditure per week. The second variable measures whether activity drops below the threshold as defined by the World Health Organization (WHO). Results suggest that the organisational setting, the intensity and number of sports practised, and the motive for participation are strongly correlated with the variation measures used. For example, both, participation in a sports club and a commercial facility, are associated with reduced seasonal variation and a significantly higher probability of participating at a volume above the WHO threshold across all seasons. These findings give some impetus for policymaking and the planning of sports programmes as well as future research directions.

  17. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  18. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    The global electrical energy consumption is still rising and there is an urgent demand to increase the power capacity. It is expected that the power capacity has to be doubled within 20 years. The production, distribution and use of energy should be as efficient as possible and incentives to save...... energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources will be high in the near future. Two major technologies will play important roles to solve the future problems. One...... is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...

  19. Innovative forms of citizen participation

    DEFF Research Database (Denmark)

    Nyseth, Torill; Ringholm, Toril; Agger, Annika

    Formal procedures of citizen participation in planning and urban governance in Norway and Denmark share many similarities. Although the planning laws are intended to give all affected stakeholders a chance to air their concerns within a limited time frame, then few use these channels for voice......: What characterises the new and innovative forms of citizen participation in urban planning in terms of innovation? And in what ways and to what degree is input from these processes fed into the formal planning processes? Theoretically, the paper is inspired by the concept of: ‘planning...... as experimentation’ (Hillier 2007, Nyseth et al 2010), ‘co-creation’ (Voorberg m.fl. 2013), and of the approach to participation offered by Clarke et al. (2014), where the traditional approaches are questioned and a contextualised approach is offered. Empirically, the paper draws on two different cases from Denmark...

  20. Entrepreneuriat Social et Participation Citoyenne

    Directory of Open Access Journals (Sweden)

    Sophie Larivet

    2010-01-01

    Full Text Available L'entrepreneuriat social est un concept émergeant, notamment dans les sciences de l'administration. Pourtant, en dehors d'une pratique directoriale spécifique, il est aussi une forme de participation citoyenne trop méconnue. L'objectif de cet article, basé sur une revue de la littérature et une approche théorique, est de présenter le concept d'entrepreneuriat social afin de mieux saisir son positionnement par rapport à la participation citoyenne. L'entrepreneuriat social constitue une forme particulière de participation à l'espace public par l'action, les entreprises sociales agissant au quotidien pour transformer le paysage social. En particulier, cet article souligne le contexte de développement de l'entrepreneuriat social, définit le concept et les notions connexes d'entreprise sociale et d'entrepreneur social, et, enfin, présente une réflexion sur la contribution de l'entrepreneuriat social à la participation citoyenne. L'article montre que l'entrepreneuriat social est une façon pour les citoyens d'agir directement et avec maîtrise sur la société. / Social entrepreneurship is an emerging concept, notably in administrative sciences. However, not only is it a specific managerial practice but it is also a type of citizen participation that is not well-known. The objective of this article, based on a literature review and a theoretical approach, is to present the concept of social entrepreneurship in order to better understand its relation to citizen participation. Social entrepreneurship represents a specific type of citizen participation involving actions. Social enterprises act daily to transform the social landscape. More specifically, this article presents the context of development of social entrepreneurship, proposes a definition of the concept and of other connected notions like "social enterprise" and "social entrepreneur", and, finally, analyzes the contribution of social entrepreneurship to citizen participation. It