WorldWideScience

Sample records for stalk assembly requires

  1. The amino terminal end determines the stability and assembling capacity of eukaryotic ribosomal stalk proteins P1 and P2.

    Science.gov (United States)

    Camargo, Hendricka; Nusspaumer, Gretel; Abia, David; Briceño, Verónica; Remacha, Miguel; Ballesta, Juan P G

    2011-05-01

    The eukaryotic ribosomal proteins P1 and P2 bind to protein P0 through their N-terminal domain to form the essential ribosomal stalk. A mutational analysis points to amino acids at positions 2 and 3 as determinants for the drastic difference of Saccharomyces cerevisiae P1 and P2 half-life, and suggest different degradation mechanisms for each protein type. Moreover, the capacity to form P1/P2 heterodimers is drastically affected by mutations in the P2β four initial amino acids, while these mutations have no effect on P1β. Binding of P2β and, to a lesser extent, P1β to the ribosome is also seriously affected showing the high relevance of the amino acids in the first turn of the NTD α-helix 1 for the stalk assembly. The negative effect of some mutations on ribosome binding can be reversed by the presence of the second P1/P2 couple in the ribosome, indicating a stabilizing structural influence between the two heterodimers. Unexpectedly, some mutations totally abolish heterodimer formation but allow significant ribosome binding and, therefore, a previous P1 and P2 association seems not to be an absolute requirement for stalk assembly. Homology modeling of the protein complexes suggests that the mutated residues can affect the overall protein conformation. © The Author(s) 2011. Published by Oxford University Press.

  2. Sequence Identification, Recombinant Production, and Analysis of the Self-Assembly of Egg Stalk Silk Proteins from Lacewing Chrysoperla carnea.

    Science.gov (United States)

    Neuenfeldt, Martin; Scheibel, Thomas

    2017-06-13

    Egg stalk silks of the common green lacewing Chrysoperla carnea likely comprise at least three different silk proteins. Based on the natural spinning process, it was hypothesized that these proteins self-assemble without shear stress, as adult lacewings do not use a spinneret. To examine this, the first sequence identification and determination of the gene expression profile of several silk proteins and various transcript variants thereof was conducted, and then the three major proteins were recombinantly produced in Escherichia coli encoded by their native complementary DNA (cDNA) sequences. Circular dichroism measurements indicated that the silk proteins in aqueous solutions had a mainly intrinsically disordered structure. The largest silk protein, which we named ChryC1, exhibited a lower critical solution temperature (LCST) behavior and self-assembled into fibers or film morphologies, depending on the conditions used. The second silk protein, ChryC2, self-assembled into nanofibrils and subsequently formed hydrogels. Circular dichroism and Fourier transform infrared spectroscopy confirmed conformational changes of both proteins into beta sheet rich structures upon assembly. ChryC3 did not self-assemble into any morphology under the tested conditions. Thereby, through this work, it could be shown that recombinant lacewing silk proteins can be produced and further used for studying the fiber formation of lacewing egg stalks.

  3. Design requirement on HYPER blanket fuel assembly

    International Nuclear Information System (INIS)

    Hwang, Woan; Lee, B. O.; Nam, C.; Ryu, W. S.; Lee, B. S.; Park, W. S.

    2000-07-01

    This document describes design requirements which are needed for designing the blanket assembly of the HYPER as design guidance. The blanket assembly of the HYPER consists of blanket fuel rods, mounting rail, spacer, upper nozzle with handling socket, bottom nozzle with mounting rail and skeleton structure. The blanket fuel rod consists of top end plug, bottom end plug with key way, blanket fuel slug, and cladding. In the assembly, the rods are in a triangular pitch array. This report contains functional requirements, performance and operational requirements, interfacing systems requirements, core restraint and interface requirements, design limits and strength requirements, system configuration and essential feature requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements for the blanket fuel assembly of the HYPER

  4. The Fear Factor: Exploring Predictors of Fear among Stalking Victims throughout the Stalking Encounter

    Science.gov (United States)

    Reyns, Bradford W.; Englebrecht, Christine M.

    2013-01-01

    The crime of stalking has received much research attention, yet there are still important questions to be explored surrounding this behavior. One such question relates to definitions of stalking, including the requirement that victims must express fear to qualify as victims of stalking. The current study addresses this issue by exploring the…

  5. Stalking and Violence.

    Science.gov (United States)

    Ostermeyer, Britta; Friedman, Susan Hatters; Sorrentino, Renee; Booth, Brad D

    2016-12-01

    The three widely known stalker classifications assist in categorizing stalkers, which allows for better management of violence risk. Although 80% of stalking is done by men, women also engage in stalking, and their violence risk should not be underestimated. Juvenile stalkers do exist and juvenile stalking is also associated with violence. Clinicians can become a victim of stalking and may become victims of stalking by proxy, a special type of stalking behavior where the stalker involves other people or agencies to communicate with or track their victim. A careful stalking violence risk assessment is essential in the intervention and risk management process. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. Multicellular stalk-like structures in Saccharomyces cerevisiae

    International Nuclear Information System (INIS)

    Engelberg, D.; Mimran, A.; Martinetto, H.; Otto, J.; Simchen, G.; Karin, M.; Fink, G.R.

    1998-01-01

    Stalk formation is a novel pattern of multicellular organization. Yeast cells which survive UV irradiation form colonies that grow vertically to form very long (0.5 to 3.0 cm) and thin (0.5 to 4 mm in diameter) multicellular structures. We describe the conditions required to obtain these stalk-like structures reproducibly in large numbers. Yeast mutants, mutated for control of cell polarity, developmental processes, UV response, and signal transduction cascades were tested and found capable of forming stalk-like structures. We suggest a model that explains the mechanism of stalk formation by mechanical environmental forces. We show that other microorganisms (Candida albicans, Schizosaccharomyces pombe, and Escherichia coli) also form stalks, suggesting that the ability to produce stalks may be a general property of microorganisms. Diploid yeast stalks sporulate at an elevated frequency, raising the possibility that the physiological role of stalks might be disseminating spores

  7. Centrioles: some self-assembly required.

    Science.gov (United States)

    Song, Mi Hye; Miliaras, Nicholas B; Peel, Nina; O'Connell, Kevin F

    2008-12-01

    Centrioles play an important role in organizing microtubules and are precisely duplicated once per cell cycle. New (daughter) centrioles typically arise in association with existing (mother) centrioles (canonical assembly), suggesting that mother centrioles direct the formation of daughter centrioles. However, under certain circumstances, centrioles can also selfassemble free of an existing centriole (de novo assembly). Recent work indicates that the canonical and de novo pathways utilize a common mechanism and that a mother centriole spatially constrains the self-assembly process to occur within its immediate vicinity. Other recently identified mechanisms further regulate canonical assembly so that during each cell cycle, one and only one daughter centriole is assembled per mother centriole.

  8. Centrioles: Some Self-Assembly Required

    OpenAIRE

    Song, Mi Hye; Miliaras, Nicholas B.; Peel, Nina; O'Connell, Kevin F.

    2008-01-01

    Centrioles play an important role in organizing microtubules and are precisely duplicated once per cell cycle. New (daughter) centrioles typically arise in association with existing (mother) centrioles (canonical assembly), suggesting that mother centrioles direct the formation of daughter centrioles. However, under certain circumstances, centrioles can also self-assemble free of an existing centriole (de novo assembly). Recent work indicates that the canonical and de novo pathways utilize a ...

  9. Design requirement on KALIMER control rod assembly duct

    International Nuclear Information System (INIS)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J.

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs

  10. Design requirement on KALIMER control rod assembly duct

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs.

  11. Design requirement on KALIMER blanket fuel assembly duct

    International Nuclear Information System (INIS)

    Hwang, Woan; Kang, H. Y.; Nam, C.; Kim, J. O.

    1998-03-01

    This document describes design requirements which are needed for designing the blanket fuel assembly duct of the KALIMER as design guidance. The blanket fuel assembly duct of the KALIMER consists of fuel rods, mounting rail, nosepiece, duct with pad, handling socket with pad. Blanket fuel rod consists of top end plug, bottom end plug with solid ferritic-martensitic steel rod and key way blanket fuel slug, cladding, and wire wrap. In the assembly, the rods are in a triangular pitch array, and the rod bundle is attached to the nosepiece with mounting rails. The bottom end of the assembly duct is formed by a long nosepiece which provides the lower restraint function and the paths for coolant inlet. This report contains functional requirements, performance and operational requirements, interfacing systems requirements, core restraint and interface requirements, design limits and strength requirements, system configuration and essential feature requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. (author). 20 refs., 4 figs

  12. Cytochrome oxidase assembly does not require catalytically active cytochrome C.

    Science.gov (United States)

    Barrientos, Antoni; Pierre, Danielle; Lee, Johnson; Tzagoloff, Alexander

    2003-03-14

    Cytochrome c oxidase (COX), the terminal enzyme of the mitochondrial respiratory chain, catalyzes the transfer of electrons from reduced cytochrome c to molecular oxygen. COX assembly requires the coming together of nuclear- and mitochondrial-encoded subunits and the assistance of a large number of nuclear gene products acting at different stages of maturation of the enzyme. In Saccharomyces cerevisiae, expression of cytochrome c, encoded by CYC1 and CYC7, is required not only for electron transfer but also for COX assembly through a still unknown mechanism. We have attempted to distinguish between a functional and structural requirement of cytochrome c in COX assembly. A cyc1/cyc7 double null mutant strain was transformed with the cyc1-166 mutant gene (Schweingruber, M. E., Stewart, J. W., and Sherman, F. (1979) J. Biol. Chem. 254, 4132-4143) that expresses stable but catalytically inactive iso-1-cytochrome c. The COX content of the cyc1/cyc7 double mutant strain harboring non-functional iso-1-cytochrome c has been characterized spectrally, functionally, and immunochemically. The results of these studies demonstrate that cytochrome c plays a structural rather than functional role in assembly of cytochrome c oxidase. In addition to its requirement for COX assembly, cytochrome c also affects turnover of the enzyme. Mutants containing wild type apocytochrome c in mitochondria lack COX, suggesting that only the folded and mature protein is able to promote COX assembly.

  13. Stalking: a neurobiological perspective.

    Science.gov (United States)

    Marazziti, Donatella; Falaschi, Valentina; Lombardi, Amedeo; Mungai, Francesco; Dell'Osso, Liliana

    2015-01-01

    Nowadays stalking is becoming a real social emergency, as it may often fuel severe aggressive behaviours. No exhaustive aetiological hypothesis is still available regarding this complex phenomenon. However, the detailed descriptions of some of its peculiar features allow to draw with cautions some general suggestions. Probably stalking may arise from the derangement of those neural networks subserving the so-called social brain and the pair bonding formation, in particular the processes of attachment/separation, attraction/romantic love/reward. In addition, it seems to be modulated by excessive functioning of the dopamine system coupled with decreased serotonin tone. It is believed that the investigation and deepening of its possible neurobiological substrates may be helpful in the prevention of the severe consequences of stalking.

  14. SP-100 nuclear assembly test: Test assembly functional requirements and system arrangement

    International Nuclear Information System (INIS)

    Fallas, T.T.; Gluck, R.; Motwani, K.; Clay, H.; O'Neill, G.

    1991-01-01

    This paper describes the functional requirements and the system that will be tested to validate the reactor, flight shield, and flight controller of the SP-100 Generic Flight System (GFS). The Nuclear Assembly Test (NAT) consists of the test article (SP-100 reactor with control devices and the flight shield) and its supporting systems. The NAT test assembly is being designed by GE. Westinghouse Hanford Company (WHC) is designing the test cell and vacuum vessel system that will contain the NAT test assembly (Renkey et al. 1989). Preliminary design reviews have been completed and the final design is under way

  15. Pituitary stalk craniopharyngioma

    Science.gov (United States)

    Figueiredo, Eberval Gadelha; Welling, Leonardo Christiaan; de Faria, Jose Weber Vieira; Teixeira, Manoel Jacobsen

    2011-01-01

    Craniopharyngiomas are benign but aggressive neoplasms arising along the craniopharyngeal duct. It is frequently located in the suprasellar region. Primarily pituitary stalk craniopharyngioma is unusual and uncommonly early diagnosed, before it enlarges and extends to supra or parasselar region. This unusual location and the small size pose therapeutic dilemmas, since it has the ability to grow larger. Currently, no consensus exists regarding the optimal management. The authors have recommended complete resection. PMID:22715220

  16. EB1 is required for primary cilia assembly in fibroblasts

    DEFF Research Database (Denmark)

    Schrøder, Jacob M; Schneider, Linda; Christensen, Søren T

    2007-01-01

    EB1 is a small microtubule (MT)-binding protein that associates preferentially with MT plus ends and plays a role in regulating MT dynamics. EB1 also targets other MT-associated proteins to the plus end and thereby regulates interactions of MTs with the cell cortex, mitotic kinetochores, and diff...... that localization of EB1 at the centriole/basal body is required for primary cilia assembly in fibroblasts....

  17. 75 FR 81085 - National Stalking Awareness Month, 2011

    Science.gov (United States)

    2010-12-27

    ... victimization than men. Stalking can be a difficult crime to recognize. The majority of survivors do not report... affects too many Americans to remain a hidden crime, and a strong stand is required in order to both...

  18. Stalking the ultimate particle

    CERN Multimedia

    2003-01-01

    If you missed the ARTE programme entitled "L'Ultime Particule" broadcast in February, you have another chance to catch it in CERN's Main Auditorium on 13 March. "L'Ultime Particule" is a documentary by the French director Michel Andrieu that seeks to explain particle physics through a contemplative quest for the research physicists of matter of today and yesteryear. Invariably kitted out in a red parka and a soft hat, the programme's investigator scours the planet and the archives in search of the research physicists who are stalking the ultimate particle, the Higgs boson, in their quest to understand the structure of matter. Naturally enough, CERN is an important stage of his journey where Michel Andrieu and his team spent several days last year. Both from the physics and metaphysical points of view, "L'Ultime Particule" is worth seeing. The film's director, Michel Andrieu, will introduce his documentary and answer questions from the audience after the documentary has been shown. L'Ultime Particule by Mic...

  19. Remote sensing techniques for monitoring the Rio Grande Valley cotton stalk destruction program

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, A.J.; Gerbermann, A.H.; Summy, K.R.; Anderson, G.L. (Department of Agriculture, Weslaco, TX (United States))

    1993-09-01

    Post harvest cotton (Gossypium hirsutum L.) stalk destruction is a cultural practice used in the Rio Grande Valley to suppress over wintering populations of boll weevils (Anthonomus grandis Boheman) without using chemicals. Consistent application of this practice could substantially reduce insecticide usage, thereby minimizing environmental hazards and increasing cotton production profits. Satellite imagery registered within a geographic information system was used to monitor the cotton stalk destruction program in the Rio Grande Valley. We found that cotton stalk screening procedures based on standard multispectral classification techniques could not reliably distinguish cotton from sorghum. Greenness screening for cotton plant stalks after the stalk destruction deadline was possible only where ground observations locating cotton fields were available. These findings indicate that a successful cotton stalk destruction monitoring program will require satellite images and earth referenced data bases showing cotton field locations.

  20. The toll of stalking: the relationship between features of stalking and psychopathology of victims.

    NARCIS (Netherlands)

    Blaauw, E.; Winkel, F.W.; Arensman, E.; Sheridan, L.; Freeve, A.

    2002-01-01

    Information on the psychological consequences of stalking on victims is scarce. The present study aimed to investigate whether stalking victims have a heightened prevalence of psychopathology and the extent to which symptom levels are associated with stalking features. Stalking victims (N = 241)

  1. Evaluation of cotton stalks destroyers

    OpenAIRE

    Bianchini, Aloisio; Borges, Pedro H. de M.

    2013-01-01

    The destruction of the cotton crop residues (cotton stalks) is a mandatory procedure in Brazil for prophylactic issues, but is a subject unexplored by the research and there are few studies that deal with this issue. However, this is not encouraged in recent decades, studies aimed at developing and evaluating equipment for this purpose. The present study had the objective to evaluate six methods for mechanical destruction of cotton crop residues. Each method was defined based on the principle...

  2. Stalking: Notion, characteristics and social responses

    Directory of Open Access Journals (Sweden)

    Nikolić-Ristanović Vesna

    2007-01-01

    Full Text Available In the last two decades stalking phenomenon is recognized and actualized in the world in professional, scientific circles, in media and the everyday talk. Recently, stalking is identified as specific and complex problem studied separately from domestic violence, workplace abuse, sexual harassment, threats, following, homicide, voyeurism and the other phenomenon to which stalking may or not be related. This paper is aimed to determine the notion of stalking and its relationship with similar phenomena, to review the research about the prevalence and nature of stalking, as well as to review the measures for its prevention, supporting victims and prosecution of offenders. Finally, the paper intend to contribute toward initiation of research and legal reforms regarding stalking victimisation in Serbia.

  3. Adolescent stalking and risk of violence✩

    Science.gov (United States)

    Smith-Darden, Joanne P.; Reidy, Dennis E.; Kernsmith, Poco D.

    2018-01-01

    Stalking perpetration and the associated risk for violence among adolescents has generally been neglected. In the present study, 1236 youth completed surveys assessing empirically established stalking indicators, threats and aggression toward stalking victims, dating violence, and violent delinquency. Latent Profile Analysis identified 3 latent classes of boys: non-perpetrators (NP), hyper-intimate pursuit (HIP), and comprehensive stalking perpetrators (CSP) and, and 2 classes for girls: NP and HIP. Boys in the CSP class were the most violent youth on nearly all indices with boys in the HIP class demonstrating an intermediate level of violence compared to NP boys. Girls in the HIP class were more violent than NP girls on all indices. These findings suggest stalking in adolescence merits attention by violence prevention experts. In particular, juvenile stalking may signify youth at risk for multiple forms of violence perpetrated against multiple types of victims, not just the object of their infatuation. PMID:27641644

  4. Technical products for radiation shielding. Shield assembled from lead blocks for radiation protection. General technical requirements

    International Nuclear Information System (INIS)

    1981-01-01

    The object of this standard description is the general technological requirements of 50 and 100 mm thick radiation protection shields assembled from lead blocks. The standard contains the definitions, types, parameters and dimensions of shields, their technical and acceptance criteria with testing methods, tagging, packaging, transportation and storage requirements, producer's liability. Some illustrated assembling examples, preferred parameters and dosimetry methods for shield inspection are given. (R.P.)

  5. Evaluation of cotton stalk hydrolysate for xylitol production.

    Science.gov (United States)

    Sapcı, Burcu; Akpinar, Ozlem; Bolukbasi, Ufuk; Yilmaz, Levent

    2016-07-03

    Cotton stalk is a widely distributed and abundant lignocellulosic waste found in Turkey. Because of its rich xylose content, it can be a promising source for the production of xylitol. Xylitol can be produced by chemical or biotechnological methods. Because the biotechnological method is a simple process with great substrate specificity and low energy requirements, it is more of an economic alternative for the xylitol production. This study aimed to use cotton stalk for the production of xylitol with Candida tropicalis Kuen 1022. For this purpose, the combined effects of different oxygen concentration, inoculum level and substrate concentration were investigated to obtain high xylitol yield and volumetric xylitol production rate. Candida tropicalis Kuen 1022 afforded different concentrations of xylitol depending on xylose concentration, inoculum level, and oxygen concentration. The optimum xylose, yeast concentration, and airflow rate for cotton stalk hydrolysate were found as 10.41 g L(-1), 0.99 g L(-1), and 1.02 vvm, respectively, and under these conditions, xylitol yield and volumetric xylitol production rate were obtained as 36% and 0.06 g L(-1) hr(-1), respectively. The results of this study show that cotton stalk can serve as a potential renewable source for the production of xylitol.

  6. Nuclear localization of Schizosaccharomyces pombe Mcm2/Cdc19p requires MCM complex assembly.

    Science.gov (United States)

    Pasion, S G; Forsburg, S L

    1999-12-01

    The minichromosome maintenance (MCM) proteins MCM2-MCM7 are conserved eukaryotic replication factors that assemble in a heterohexameric complex. In fission yeast, these proteins are nuclear throughout the cell cycle. In studying the mechanism that regulates assembly of the MCM complex, we analyzed the cis and trans elements required for nuclear localization of a single subunit, Mcm2p. Mutation of any single mcm gene leads to redistribution of wild-type MCM subunits to the cytoplasm, and this redistribution depends on an active nuclear export system. We identified the nuclear localization signal sequences of Mcm2p and showed that these are required for nuclear targeting of other MCM subunits. In turn, Mcm2p must associate with other MCM proteins for its proper localization; nuclear localization of MCM proteins thus requires assembly of MCM proteins in a complex. We suggest that coupling complex assembly to nuclear targeting and retention ensures that only intact heterohexameric MCM complexes remain nuclear.

  7. Comparative pulping of sunflower stalks

    Directory of Open Access Journals (Sweden)

    Valerii Barbash

    2016-03-01

    Full Text Available The procedure of holocellulose content determination in non-wood plant raw materials was developed. The strength properties of pulp obtained from sunflower stalks by neutral-sulphite, soda, alkaline sulphite-anthraquinone-ethanol and peracetic methods of delignification were studied. Methodology of comparison of plant materials delignification methods using new lignin-carbohydrate diagram was proposed. It was shown, that the alkaline sulphite-anthraquinone-ethanol method of pulping is characterized by the highest delignification degree and is the most efficient among the studied methods

  8. The prevalence of stalking in the Netherlands

    NARCIS (Netherlands)

    van der Aa, S.; Kunst, M.J.J.

    2009-01-01

    Over eight years after the enactment of the Dutch anti-stalking provisions there are still no figures detailing the prevalence of stalking in The Netherlands. This article aims to estimate the lifetime and annual prevalence of this form of victimization within the Dutch population. Questionnaires

  9. Utilization of enzyme supplemented Telfairia occidentalis stalk ...

    African Journals Online (AJOL)

    An eight (8) week feeding trial was carried out to assess the use of enzyme natuzyme supplemented Telfairia occidentalis stalk extract as growth inducer in the practical diet for Oreochromis niloticus fingerlings. Five isonitrogenous (35% crude protein) diets at 0 ml of stalk extract and enzyme (TRT 1), 15 ml (TRT 2) and 30 ...

  10. Stalking: Criminological and criminal law aspects

    Directory of Open Access Journals (Sweden)

    Dimovski Darko

    2016-01-01

    Full Text Available Starting from the historical aspects of stalking crime, the author first provides an overview of different definitions of this socially negative behavior in the legal documents of countries where such conduct was first criminalized. The author presents statistical data on the scope of stalking in the United States and Australia. The second part of the paper discusses different types of stalkers, whose distinctive features are analyzed in more detail. In particular, the author focuses on the causal link between the stalking crime and violence, as well as the victims' responses to their own victimization. In the next part of this article, the author provides a detailed analysis of a wide range of consequences of stalking crime. In some cases, the victim of stalking may become the perpetrator of a criminal act of murder, whereas the stalker becomes a victim of this serious form of homicide. Although these cases are not numerous, they call for further analysis and proposing new legal solutions related to the privileged forms of murder, which are aimed at improving the position of the victim of stalking who is the perpetrator of such homicide. Finally, the author argues in favour of incriminating a new type of felony - the crime of stalking (in line with the model envisaged in the criminal legislation of the Republic of Croatia, as well as a privileged homicide which may be designated as a murder of a stalker committed by a victim of stalking.

  11. Stalking

    Science.gov (United States)

    ... Crime, Teens, and Trauma Assault Bullying and Harassment Child Sexual Abuse Dating Violence Sexual Assault Robbery and Property Crime ... and Victimization in the News Media Reporting on Child Sexual Abuse Reporting Do's and Don'ts Sandusky Criminal Trial & ...

  12. Assembling Components using SysML with Non-Functional Requirements

    OpenAIRE

    Chouali , Samir; Hammad , Ahmed; Mountassir , Hassan

    2013-01-01

    International audience; Non-functional requirements of component based systems are important as their functional requirements, therefore they must be considered in components assembly. These properties are beforehand specified with SysML requirement diagram. We specify component based system architecture with SysML block definition diagram, and component behaviors with sequence diagrams. We propose to specify formally component interfaces with interface automata, obtained from requirement and...

  13. Bioethanol production from dried sweet sorghum stalk

    Energy Technology Data Exchange (ETDEWEB)

    Almodares, A.; Etemadifar, Z.; Ghoreishi, F.; Yosefi, F. [Biology Dept. Univ. of Isfahan, Isfahan (Iran, Islamic Republic of)], e-mail: aalmodares@yahoo.com

    2012-11-01

    Bioethanol as a renewable transportation fuel has a great potential for energy and clean environment. Among crops sweet sorghum is one of the best feedstock for ethanol production under hot and dry climatic conditions. Because it has higher tolerance to salt and drought comparing to sugarcane and corn that are currently used for bio-fuel production in the world. Generally mills are used to extract the juice from sweet sorghum stalks. Three roller mills extract around nearly 50 percent of the juice and more mills is needed to extract higher percentage of the juice. More over under cold weather the stalks become dry and juice is not extracted from the stalk, therefore reduce harvesting period. In this study stalks were harvested, leaves were stripped from the stalks and the stalks were chopped to nearly 4 mm length and sun dried. The dry stalks were grounded to 60 mesh powder by a mill. Fermentation medium consists of 15-35% (w/w) sweet sorghum powder, micronutrients and active yeast inoculum from 0.5-1% (w/w) by submerge fermentation method. The fermentation time and temperature were 48-72 hours and 30 deg, respectively. The results showed the highest amount of ethanol (14.5 % w/w sorghum) was produced with 10% sweet sorghum powder and 1% of yeast inoculum, three day fermentation at 30 deg.

  14. Body Stalk Syndrome: A Curiosity

    Directory of Open Access Journals (Sweden)

    Anita Javalgi

    2014-07-01

    Full Text Available Limb body wall complex (LBWC /Body stalk syndrome anomaly refers to a rare complicated polymalformative fetal malformation syndrome of uncertain etiology firstly described by Van Allen et al in 1987. There are very few cases reported in literature and thus we report a rare case of LBWC. Twenty seven years female presented to labour room with 32 weeks of gestation with no prenatal care and delivered a low birth weight still born fetus weighing 1100gms. On fetal autopsy large abdominal wall defect was noted with difficulty in identifying abdomino-pelvic organs and ambiguous genitalia. Placenta weighed 250gms with attached short umbilical cord measuring 7cms, arising from periphery. A cyst noted attached to placental membrane measuring 9x5cms which on dissection retrieved partially maldeveloped organs. Post mortem radiological findings included Absence of right femur with short tibia and right fibula, Complex vestibral malformation, Craniosynostosis and Overcrowding of ribs.

  15. The consequences of coping with stalking

    DEFF Research Database (Denmark)

    Johansen, Katrine Bindesbøl Holm; Tjørnhøj-Thomsen, Tine

    2016-01-01

    OBJECTIVES: The purpose of this article is to explore: (1) how victims of stalking experience the phenomenon in their daily life, (2) how the nature of stalking informs the victim's internal coping strategies, and (3) how the victims' internal coping strategies negatively affect their daily life...... and well-being. METHODS: Qualitative semi-structured interviews were conducted with 25 victims of stalking. Thematic content analysis was employed, and themes were primarily identified inductively and broad into dialogue with concepts, such as Foucault's panopticism. RESULTS: The results of the study...

  16. National Ignition Facility subsystem design requirements final optics assembly subsystem SSDR 1.8.7

    International Nuclear Information System (INIS)

    Adams, C.

    1996-01-01

    This SSDR establishes the performance, design, development and test requirements for the Final Optic Assembly (FOA). The FOA (WBS 1.8.7) as part of the Target Experimental System (1.8) includes vacuum windows, frequency conversion crystals, focus lens, debris shields and supporting mechanical equipment

  17. The complete mitochondrial genome of the Antarctic stalked jellyfish, Haliclystus antarcticus Pfeffer, 1889 (Staurozoa: Stauromedusae

    Directory of Open Access Journals (Sweden)

    Hsing-Hui Li

    2016-06-01

    Full Text Available In present study, the complete mitogenome sequence of the Antarctic stalked jellyfish, Haliclystus antarcticus Pfeffer (Staurozoa: Stauromedusae has been sequenced by next-generation sequencing method. The assembled mitogenome comprises of 15,766 bp including 13 protein coding genes, 7 transfer RNAs, and 2 ribosomal RNA genes. The overall base of Antarctic stalked jellyfish constitutes of 26.5% for A, 19.6% for C, 19.8% for G, 34.1% for T and show 90% identity to Sessile Jelly, Haliclystus sanjuanensis, in the northeastern Pacific Ocean. The complete mitogenome of the Antarctic stalked jellyfish, contributes fundamental and significant DNA molecular data for further phylogeography and evolutionary analysis for seahorse phylogeny. The complete sequence was deposited in DBBJ/EMBL/GenBank under accession number KU947038.

  18. Identification of metastases in the pituitary stalk

    Energy Technology Data Exchange (ETDEWEB)

    Schubiger, O

    1982-09-01

    Two cases of metastasis in the pituitary stalk are presented. In both cases, presenting with diabetes insipidus, the demonstration of a small (under 1 cm) metastasis in the pituitary stalk was possible using a current generation scanner. Patients with known primary tumors presenting with a diabetes insipidus should be examined by CT before therapy with antidiuretic hormone is initiated. In cases of visible metastasis, a specific therapy together with the hormone-substitution should be discussed.

  19. [Nurses' experiences of stalking: a narrative review].

    Science.gov (United States)

    Comparcini, Dania; Simonetti, Valentina; Lupo, Roberto; Cicolini, Giancarlo

    2015-01-01

    This narrative review aimed to synthetize the results of the main studies analysing nurses' experience of stalking in different clinical settings. We searched the electronic databases MEDLINE (through PubMed), CINAHL (through EBSCOhost) and the search engine "Google Scholar". Searches were limited to articles published in English and Italian, and published between 1999 and 2013. Stalking refers to a behavioural pattern characterized by persistent unwanted communications and contacts imposed to another person, which, consequently suffer from distress, fear, and anxiety. Several studies explored the risk of stalking in healthcare system, especially in doctors and psychiatrists. Some authors analysed nurses' experience of stalking with particular attention to mental health professionals as a group category with an increased risk of stalking by patients. Results of some studies carried out in different clinical settings (medical and surgical areas, and other healthcare settings) also revealed, even if in a minority, the presence of this phenomenon, showing the presence of staking's behaviours by patients and healthcare colleagues too. However, more researches with large sample size are needed to better understand the phenomenon of stalking in nurses working in different clinical areas.

  20. Some thoughts on the neurobiology of stalking.

    Science.gov (United States)

    Meloy, J Reid; Fisher, Helen

    2005-11-01

    The authors examine the crime of stalking, including the cognitive traits, emotional reactions, attachment pathology, violence patterns and sex differences of samples of stalking offenders. They focus on two common types of stalkers: 1) those who sustain pursuit of a former sexual intimate who has rejected them; and 2) those who pursue a stranger or acquaintance who has failed to return the stalker's romantic overtures. The authors discuss data from neuroimaging (fMRI) studies of romantic love which suggest that these forms of stalking may be associated with heightened activity of subcortical dopaminergic pathways of the "Reward System" of the brain, perhaps in combination with low activity of central serotonin. The authors propose that this set of neural correlates may contribute to the stalker's focused attention, increased energy, following behaviors, obsessive thinking about and impulsivity directed toward the victim. To further explore the neural systems associated with stalking behavior, they also discuss several biopsychological phenomena associated with romantic rejection, including the "protest response," "frustration attraction," "abandonment rage" and "mate guarding." They illustrate the parallels between stalking and addiction. They conclude that stalking may be associated with a specific set of biological components and they offer suggestions for further research into this pathological emotional/motivational state.

  1. Rab1A is required for assembly of classical swine fever virus particle.

    Science.gov (United States)

    Lin, Jihui; Wang, Chengbao; Liang, Wulong; Zhang, Jing; Zhang, Longxiang; Lv, Huifang; Dong, Wang; Zhang, Yanming

    2018-01-15

    Rab1A belongs to the small Rab GTPase family and is involved in the lifecycle of numerous viruses. Here, knockdown of Rab1A inhibited CSFV growth. Further study revealed that Rab1A depletion decreased intracellular and extracellular CSFV titers, but did not affect intracellular virus genome copies and E2 protein expression within a virus lifecycle, which suggested that Rab1A is required for CSFV particle assembly rather than for genome replication or virion release. This was proofed by blocking the spread of virus using neutralizing antibodies, through which the negative effects of Rab1A knockdown on multi-cycle replication of CSFV were eliminated. Moreover, co-immunoprecipitation and confocal microscopy assays showed that Rab1A bound to CSFV NS5A protein, indicating that Rab1A and viral NS5A proteins may work cooperatively during CSFV particle assembly. In conclusion, this study demonstrated for the first time that Rab1A is required for CSFV particle assembly and binds to viral particle assembly-related NS5A protein. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. [Stalking: From "romantic pursuit" to sexual predation].

    Science.gov (United States)

    Cailleau, Virginie; Harika-Germaneau, Ghina; Delbreil, Alexia; Jaafari, Nematollah

    2018-06-01

    Deriving from the English verb "to stalk", stalking denotes an unwelcome, repetitive, and intrusive harassing and/or threatening behavior directed toward a specific individual, and can result in physical and/or sexual offending - even leading to homicide. French harassment legislation has evolved over the years, and the last law closest to the international anti-stalking laws had been promulgated in 2014. According to a review, up to 16% of women and 7% of men are stalked in their life, and 80% of the stalkers are known to their victims. Stalkers are a heterogeneous population, either seeking an intimate relationship with someone the stalker knows or with a celebrity, or being revenge-motivated, or tracking their victims with the aim of offending them. Stalkers threat their victims in about half of the cases, and physically offend them in a third of the cases, violence being more often directed against ex-intimates. Sexual offending would be the consequence of harassment behavior for some stalkers, and would be the initial aim of the stalking for others. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  3. Stable MCC binding to the APC/C is required for a functional spindle assembly checkpoint

    DEFF Research Database (Denmark)

    Hein, Jamin B; Nilsson, Jakob

    2014-01-01

    stably to the APC/C. Whether MCC formation per se is sufficient for a functional SAC or MCC association with the APC/C is required remains unclear. Here, we analyze the role of two conserved motifs in Cdc20, IR and C-Box, in binding of the MCC to the APC/C. Mutants in both motifs assemble the MCC....../C is critical for a functional SAC....

  4. Manufacturing requirements of reactor assembly components for PFBR (Paper No. 041)

    International Nuclear Information System (INIS)

    Murty, C.G.K.; Bhoje, S.B.

    1987-02-01

    This paper enumerates the requirements of 500 MWe Prototype Fast Breeder Reactor (PFBR) components and considering the present state of art of Indian industry an analysis is made on the challenges to be faced in manufacture highlighting the areas needing development. The large sizes and weights of the components coupled with the limitations on shop facilities and ODC transport, demand part of the fabrication to be done at shop and balance assembly work as well as certain assembly machining operations to be done at site work shop. The stringent geometrical tolerances coupled with extensive destructive and non-destructive examinations call for balanced and low heat input welding techniques and special inspection equipment like electronic co-ordinate determination system. The present paper deals with the specific manufacturing problems of the main reactor components. (author)

  5. Stalking Behavior and the Cycle of Domestic Violence.

    Science.gov (United States)

    Coleman, Frances L.

    1997-01-01

    Refines the behavioral definition of stalking, investigates the role stalking plays in domestic violence, and develops demographic profiles of stalkers and their victims. Results based on information taken from 141 college women show that subjects who reported significantly more abuse during relationships were more likely to be stalked by former…

  6. STALKED BARNACLES CONCHODERMA AURITUM ON AN ...

    African Journals Online (AJOL)

    lower jaw, the palate and the penis of the sperm whale - Carke 1966). The occurrence of. C. auritum on the body skin of an elephant seal is therefore ... It can be inferred from Sorensen's remark that "barnacles up to an inch in length have been seen ... " that a stalked barnacle was involved, and Laws indeed refers to those.

  7. Vulture worries stalk activists on Uttarayan

    African Journals Online (AJOL)

    2007-03-01

    Mar 1, 2007 ... Vulture worries stalk activists on Uttarayan. Anon. Ahmedabad – When kites take to the skies on Uttarayan, animal activists will be biting their nails in apprehension. Their main concern is the White-rumped. Vulture, a highly endangered species, of which only 137 birds are left in the city, according to figures ...

  8. Enkele kanttekeningen bij de strafbaarstelling van stalking

    NARCIS (Netherlands)

    van Klink, B.M.J.; Royakkers, L.M.M.

    1998-01-01

    In dit artikel gaan wij nader in op het fenomeen stalking in het algemeen en het wetsvoorstel dienaangaande in het bijzonder. §2 biedt een conceptuele analyse van het begrip ¿belaging', dat door ons wordt opgevat als een vorm van geestelijke mishandeling. Beseft dient te worden dat het hierbij niet

  9. Drosophila Ana1 is required for centrosome assembly and centriole elongation.

    Science.gov (United States)

    Saurya, Saroj; Roque, Hélio; Novak, Zsofia A; Wainman, Alan; Aydogan, Mustafa G; Volanakis, Adam; Sieber, Boris; Pinto, David Miguel Susano; Raff, Jordan W

    2016-07-01

    Centrioles organise centrosomes and cilia, and these organelles have an important role in many cell processes. In flies, the centriole protein Ana1 is required for the assembly of functional centrosomes and cilia. It has recently been shown that Cep135 (also known as Bld10) initially recruits Ana1 to newly formed centrioles, and that Ana1 then recruits Asl (known as Cep152 in mammals) to promote the conversion of these centrioles into centrosomes. Here, we show that ana1 mutants lack detectable centrosomes in vivo, that Ana1 is irreversibly incorporated into centrioles during their assembly and appears to play a more important role in maintaining Asl at centrioles than in initially recruiting Asl to centrioles. Unexpectedly, we also find that Ana1 promotes centriole elongation in a dose-dependent manner: centrioles are shorter when Ana1 dosage is reduced and are longer when Ana1 is overexpressed. This latter function of Ana1 appears to be distinct from its role in centrosome and cilium function, as a GFP-Ana1 fusion lacking the N-terminal 639 amino acids of the protein can support centrosome assembly and cilium function but cannot promote centriole over-elongation when overexpressed. © 2016. Published by The Company of Biologists Ltd.

  10. New requirements for the WWER fuel and their consideration in designing the fuel assemblies

    International Nuclear Information System (INIS)

    Vasilchenko, I.; Ananyev, Y.

    2003-01-01

    In 2001-2002 the base designs of the new generation fuel assemblies for the WWER-440 and WWER-1000 reactors were developed. The ways of their further modernisation were defined. The present report deals with the urgent requirements and how they have been implemented in these designs. The assessment of the efficiency of new designs is carried out on the basis of the existing data of the world market on the cost of: Uranium concentrate; dividing operations; fabrication. It is additionally possible also to take into account the cost of transportation, storage and processing of the irradiated fuel including burial of wastes

  11. Spike protein assembly into the coronavirion: exploring the limits of its sequence requirements

    International Nuclear Information System (INIS)

    Bosch, Berend Jan; Haan, Cornelis A.M. de; Smits, Saskia L.; Rottier, Peter J.M.

    2005-01-01

    The coronavirus spike (S) protein, required for receptor binding and membrane fusion, is incorporated into the assembling virion by interactions with the viral membrane (M) protein. Earlier we showed that the ectodomain of the S protein is not involved in this process. Here we further defined the requirements of the S protein for virion incorporation. We show that the cytoplasmic domain, not the transmembrane domain, determines the association with the M protein and suffices to effect the incorporation into viral particles of chimeric spikes as well as of foreign viral glycoproteins. The essential sequence was mapped to the membrane-proximal region of the cytoplasmic domain, which is also known to be of critical importance for the fusion function of the S protein. Consistently, only short C-terminal truncations of the S protein were tolerated when introduced into the virus by targeted recombination. The important role of the about 38-residues cytoplasmic domain in the assembly of and membrane fusion by this approximately 1300 amino acids long protein is discussed

  12. National Ignition Facility subsystem design requirements optics assembly building (OAB) SSDR 1.2.2.3

    International Nuclear Information System (INIS)

    Kempel, P.; Hands, J.

    1996-01-01

    This Subsystem Design Requirement (SSDR) document establishes the performance, design, and verification requirements 'for the conventional building systems and subsystems of the Optics Assembly Building (OAB). These building system requirements are associated with housing and supporting the operational flow of personnel and materials throughout the OAB for preparing and repairing optical and mechanical components used in the National Ignition Facility (NIF) Laser and Target Building (LTAB). This SSDR addresses the following subsystems associated with the OAB: * Structural systems for the building spaces and operational-support equipment and building- support equipment. * Architectural building features associated with housing the space, operational cleanliness, and functional operation of the facility. * Heating, Ventilating, and Air Conditioning (HVAC) systems for maintaining a clean and thermally stable ambient environment within the facility. * Plumbing systems that provide potable water and sanitary facilities for the occupants and stormwater drainage for transporting rainwater. * Fire Protection systems that guard against fire damage to the facility and its contents. * Material handling equipment for transferring optical assemblies and other materials within building areas and to the LTAB. * Mechanical process piping systems for liquids and gases that provide cooling, cleaning, and other service to optical and mechanical components. * Electrical power and grounding systems that provide service to the building and equipment, including lighting distribution and communications systems for the facilities. * Instrumentation and control systems that ensure the safe operation of conventional facilities systems, such as those listed above. Generic design criteria, such as siting data, seismic requirements, utility availability, and other information that contributes to the OAB design, are not addressed in this document

  13. Stalking: A Multidimensional Framework for Assessment and Safety Planning.

    Science.gov (United States)

    Logan, T K; Walker, Robert

    2015-09-03

    Despite the high prevalence of stalking and the risk of harm it poses to victims, arrest rates, prosecutions, and convictions for stalking continue to be low in the United States. The overall goal of this article is to introduce a multidimensional framework of stalking that adds to the current literature by (1) providing a conceptual framework consistent with legal elements of many stalking statutes to facilitate assessment, communication, documentation, and safety planning for stalking several victims; (2) introducing a more systematic way of assessing course of conduct and the context of fear in stalking situations in order to increase the understanding of cumulative fear for stalking victims; (3) emphasizing the aspects of stalking harm that go beyond violence and that show how harm from stalking accumulates over time including life sabotage; and (4) discussing 12 risk factors derived from the overall multidimensional framework that can be used to describe the big picture of stalking and to facilitate safety planning for victims. Implications for future research are discussed. © The Author(s) 2015.

  14. Lo stalking, un reato senza genere

    Directory of Open Access Journals (Sweden)

    Annamaria Iaccarino

    2015-09-01

    Full Text Available An individual who watches, follows, tracks and controls the victim with the aim of intervening, in a more or less violent way, in their private life is called a stalker or a “prowler always on the lookout”, because they commit repeated actions or attempted contacts or real communications, not desired by the victim, which may cause discomfort, anxiety, nuisance, concern and fear to the victim. Stalking is a term that may apply to any gender. To Lombroso’s “monster woman” and Hart’s “old maids’ madness” it is necessary to add the phenomenon of stalking committed by women whose modus operandi, without doubt, is more sly and subtle than the one of men. It refers to the retrospective act analysed by classic theories.

  15. Analysis of spatial patterns informs community assembly and sampling requirements for Collembola in forest soils

    Science.gov (United States)

    Dirilgen, Tara; Juceviča, Edite; Melecis, Viesturs; Querner, Pascal; Bolger, Thomas

    2018-01-01

    The relative importance of niche separation, non-equilibrial and neutral models of community assembly has been a theme in community ecology for many decades with none appearing to be applicable under all circumstances. In this study, Collembola species abundances were recorded over eleven consecutive years in a spatially explicit grid and used to examine (i) whether observed beta diversity differed from that expected under conditions of neutrality, (ii) whether sampling points differed in their relative contributions to overall beta diversity, and (iii) the number of samples required to provide comparable estimates of species richness across three forest sites. Neutrality could not be rejected for 26 of the forest by year combinations. However, there is a trend toward greater structure in the oldest forest, where beta diversity was greater than predicted by neutrality on five of the eleven sampling dates. The lack of difference in individual- and sample-based rarefaction curves also suggests randomness in the system at this particular scale of investigation. It seems that Collembola communities are not spatially aggregated and assembly is driven primarily by neutral processes particularly in the younger two sites. Whether this finding is due to small sample size or unaccounted for environmental variables cannot be determined. Variability between dates and sites illustrates the potential of drawing incorrect conclusions if data are collected at a single site and a single point in time.

  16. hemingway is required for sperm flagella assembly and ciliary motility in Drosophila.

    Science.gov (United States)

    Soulavie, Fabien; Piepenbrock, David; Thomas, Joëlle; Vieillard, Jennifer; Duteyrat, Jean-Luc; Cortier, Elisabeth; Laurençon, Anne; Göpfert, Martin C; Durand, Bénédicte

    2014-04-01

    Cilia play major functions in physiology and development, and ciliary dysfunctions are responsible for several diseases in humans called ciliopathies. Cilia motility is required for cell and fluid propulsion in organisms. In humans, cilia motility deficiencies lead to primary ciliary dyskinesia, with upper-airways recurrent infections, left-right asymmetry perturbations, and fertility defects. In Drosophila, we identified hemingway (hmw) as a novel component required for motile cilia function. hmw encodes a 604-amino acid protein characterized by a highly conserved coiled-coil domain also found in the human orthologue, KIAA1430. We show that HMW is conserved in species with motile cilia and that, in Drosophila, hmw is expressed in ciliated sensory neurons and spermatozoa. We created hmw-knockout flies and found that they are hearing impaired and male sterile. hmw is implicated in the motility of ciliated auditory sensory neurons and, in the testis, is required for elongation and maintenance of sperm flagella. Because HMW is absent from mature flagella, we propose that HMW is not a structural component of the motile axoneme but is required for proper acquisition of motile properties. This identifies HMW as a novel, evolutionarily conserved component necessary for motile cilium function and flagella assembly.

  17. Briquetting of Charcoal from Sesame Stalk

    Directory of Open Access Journals (Sweden)

    Alula Gebresas

    2015-01-01

    Full Text Available Due to the easy availability of wood in Ethiopia, wood charcoal has been the main source fuel for cooking. This study has been started on sesame stalk biomass briquetting which can potentially solve the health problems and shortage of energy, which consequently can solve deforestation. The result of the data collection shows that, using 30% conversion efficiency of carbonizer, it was found that more than 150,000 tonnes of charcoal can be produced from the available sesame stalk in Humera, a place in north Ethiopia. The clay binders that are mixed with carbonized sesame stalk were found to have 69 liquid limits; thus, the optimum amount of clay that should be added as a binder is 15%, which results in better burning and heat holding capacity and better heating time. The developed briquetting machine has a capacity of producing 60 Kg/hr but the carbonization kiln can only carbonize 3.1 Kg in 2 : 40 hours; hence, it is a bottle neck for the briquette production. The hydrocarbon laboratory analysis showed that the calorific value of the charcoal produced with 15% clay content is 4647.75 Cal/gm and decreases as clay ratio increases and is found to be sufficient energy content for cooking.

  18. Do men and women differ in their perceptions of stalking: an exploratory study among college students.

    Science.gov (United States)

    Lambert, Eric G; Smith, Brad; Geistman, James; Cluse-Tolar, Terry; Jiang, Shanhe

    2013-01-01

    Stalking is a crime that can terrify its victims and ultimately take a severe emotional toll. Although a growing body of research has examined stalking experiences and reactions of victims, there has been far less research on whether men and women differ in their perceptions of stalking. Toward this end, a survey of college students at a large public 4-year Midwestern university was undertaken. We examined differences is how men and women view stalking and whether gender differences were moderated by prior stalking experience. Specifically, we examined whether there were gender differences in perceptions of the pervasiveness of stalking, the harm stalking does, who tends to be stalked, if stalking mainly involves former relational partners, possible motivations for stalking, the line between courtship and stalking, and notions of victim blaming. We found significant differences in stalking views between men and women on all the measures, except for perceptions of the line between courtship and stalking. Women tended to perceive stalking as more pervasive and harmful. Men were more likely to perceive stalking as involving strangers and to blame the victim for the stalking. Female and male respondents also differed in their perceptions of motivations for stalking. Prior victim stalking experience did not moderate the gender differences. Although being a prior stalking victim had a significant association with 4 of the 7 stalking perception variables, its effect sizes were smaller than that of gender.

  19. Arf4 is required for Mammalian development but dispensable for ciliary assembly.

    Directory of Open Access Journals (Sweden)

    John A Follit

    2014-02-01

    Full Text Available The primary cilium is a sensory organelle, defects in which cause a wide range of human diseases including retinal degeneration, polycystic kidney disease and birth defects. The sensory functions of cilia require specific receptors to be targeted to the ciliary subdomain of the plasma membrane. Arf4 has been proposed to sort cargo destined for the cilium at the Golgi complex and deemed a key regulator of ciliary protein trafficking. In this work, we show that Arf4 binds to the ciliary targeting sequence (CTS of fibrocystin. Knockdown of Arf4 indicates that it is not absolutely required for trafficking of the fibrocystin CTS to cilia as steady-state CTS levels are unaffected. However, we did observe a delay in delivery of newly synthesized CTS from the Golgi complex to the cilium when Arf4 was reduced. Arf4 mutant mice are embryonic lethal and die at mid-gestation shortly after node formation. Nodal cilia appeared normal and functioned properly to break left-right symmetry in Arf4 mutant embryos. At this stage of development Arf4 expression is highest in the visceral endoderm but we did not detect cilia on these cells. In the visceral endoderm, the lack of Arf4 caused defects in cell structure and apical protein localization. This work suggests that while Arf4 is not required for ciliary assembly, it is important for the efficient transport of fibrocystin to cilia, and also plays critical roles in non-ciliary processes.

  20. Highly precise and developmentally programmed genome assembly in Paramecium requires ligase IV-dependent end joining.

    Directory of Open Access Journals (Sweden)

    Aurélie Kapusta

    2011-04-01

    Full Text Available During the sexual cycle of the ciliate Paramecium, assembly of the somatic genome includes the precise excision of tens of thousands of short, non-coding germline sequences (Internal Eliminated Sequences or IESs, each one flanked by two TA dinucleotides. It has been reported previously that these genome rearrangements are initiated by the introduction of developmentally programmed DNA double-strand breaks (DSBs, which depend on the domesticated transposase PiggyMac. These DSBs all exhibit a characteristic geometry, with 4-base 5' overhangs centered on the conserved TA, and may readily align and undergo ligation with minimal processing. However, the molecular steps and actors involved in the final and precise assembly of somatic genes have remained unknown. We demonstrate here that Ligase IV and Xrcc4p, core components of the non-homologous end-joining pathway (NHEJ, are required both for the repair of IES excision sites and for the circularization of excised IESs. The transcription of LIG4 and XRCC4 is induced early during the sexual cycle and a Lig4p-GFP fusion protein accumulates in the developing somatic nucleus by the time IES excision takes place. RNAi-mediated silencing of either gene results in the persistence of free broken DNA ends, apparently protected against extensive resection. At the nucleotide level, controlled removal of the 5'-terminal nucleotide occurs normally in LIG4-silenced cells, while nucleotide addition to the 3' ends of the breaks is blocked, together with the final joining step, indicative of a coupling between NHEJ polymerase and ligase activities. Taken together, our data indicate that IES excision is a "cut-and-close" mechanism, which involves the introduction of initiating double-strand cleavages at both ends of each IES, followed by DSB repair via highly precise end joining. This work broadens our current view on how the cellular NHEJ pathway has cooperated with domesticated transposases for the emergence of new

  1. Highly precise and developmentally programmed genome assembly in Paramecium requires ligase IV-dependent end joining.

    Science.gov (United States)

    Kapusta, Aurélie; Matsuda, Atsushi; Marmignon, Antoine; Ku, Michael; Silve, Aude; Meyer, Eric; Forney, James D; Malinsky, Sophie; Bétermier, Mireille

    2011-04-01

    During the sexual cycle of the ciliate Paramecium, assembly of the somatic genome includes the precise excision of tens of thousands of short, non-coding germline sequences (Internal Eliminated Sequences or IESs), each one flanked by two TA dinucleotides. It has been reported previously that these genome rearrangements are initiated by the introduction of developmentally programmed DNA double-strand breaks (DSBs), which depend on the domesticated transposase PiggyMac. These DSBs all exhibit a characteristic geometry, with 4-base 5' overhangs centered on the conserved TA, and may readily align and undergo ligation with minimal processing. However, the molecular steps and actors involved in the final and precise assembly of somatic genes have remained unknown. We demonstrate here that Ligase IV and Xrcc4p, core components of the non-homologous end-joining pathway (NHEJ), are required both for the repair of IES excision sites and for the circularization of excised IESs. The transcription of LIG4 and XRCC4 is induced early during the sexual cycle and a Lig4p-GFP fusion protein accumulates in the developing somatic nucleus by the time IES excision takes place. RNAi-mediated silencing of either gene results in the persistence of free broken DNA ends, apparently protected against extensive resection. At the nucleotide level, controlled removal of the 5'-terminal nucleotide occurs normally in LIG4-silenced cells, while nucleotide addition to the 3' ends of the breaks is blocked, together with the final joining step, indicative of a coupling between NHEJ polymerase and ligase activities. Taken together, our data indicate that IES excision is a "cut-and-close" mechanism, which involves the introduction of initiating double-strand cleavages at both ends of each IES, followed by DSB repair via highly precise end joining. This work broadens our current view on how the cellular NHEJ pathway has cooperated with domesticated transposases for the emergence of new mechanisms

  2. Host ESCRT proteins are required for bromovirus RNA replication compartment assembly and function.

    Directory of Open Access Journals (Sweden)

    Arturo Diaz

    2015-03-01

    Full Text Available Positive-strand RNA viruses genome replication invariably is associated with vesicles or other rearranged cellular membranes. Brome mosaic virus (BMV RNA replication occurs on perinuclear endoplasmic reticulum (ER membranes in ~70 nm vesicular invaginations (spherules. BMV RNA replication vesicles show multiple parallels with membrane-enveloped, budding retrovirus virions, whose envelopment and release depend on the host ESCRT (endosomal sorting complexes required for transport membrane-remodeling machinery. We now find that deleting components of the ESCRT pathway results in at least two distinct BMV phenotypes. One group of genes regulate RNA replication and the frequency of viral replication complex formation, but had no effect on spherule size, while a second group of genes regulate RNA replication in a way or ways independent of spherule formation. In particular, deleting SNF7 inhibits BMV RNA replication > 25-fold and abolishes detectable BMV spherule formation, even though the BMV RNA replication proteins accumulate and localize normally on perinuclear ER membranes. Moreover, BMV ESCRT recruitment and spherule assembly depend on different sets of protein-protein interactions from those used by multivesicular body vesicles, HIV-1 virion budding, or tomato bushy stunt virus (TBSV spherule formation. These and other data demonstrate that BMV requires cellular ESCRT components for proper formation and function of its vesicular RNA replication compartments. The results highlight growing but diverse interactions of ESCRT factors with many viruses and viral processes, and potential value of the ESCRT pathway as a target for broad-spectrum antiviral resistance.

  3. Stalking. Part II: Victims' problems with the legal system and therapeutic considerations.

    Science.gov (United States)

    Abrams, K M; Robinson, G E

    1998-06-01

    This paper is the second of 2 parts reviewing the topic of stalking. It focuses on victims difficulties with the legal system and the psychotherapeutic tasks for victims and therapists. Computerized literature searches were used to identify relevant papers from psychiatric and legal journals. Publications by victims' and women's organizations provided additional information. Victims suffer emotional consequences from being stalked. Additional stress is caused by the legal system's lack of understanding of the causes and consequences of stalking and inadequate and unenforced laws. The treatment of victims requires a comprehensive approach, including education, supportive psychotherapy, and discussion of practical measures. Therapists may overidentify with the patient's powerlessness or hesitate to take on a case out of fear of the stalker. Female therapists may protect themselves against the realization of their own vulnerability by blaming the victim, while male therapists may feel defensive or overprotective. Stalking is a crime with major mental health consequences which is often poorly understood by society. Therapists need to be aware of the victim's emotional reactions, the types of legal and practical supports available, and the possible biases of society. Further education and research should be encouraged.

  4. Antifungal properties of Musa paradisiaca (Plantain) peel and stalk ...

    African Journals Online (AJOL)

    Effect of plantain (Musa paradisiaca (L) AAB genomic group) peel and stalk extracts were investigated using percentage inhibition test. Complete inhibition of growth (100%) was observed for Aspergillusniger, Aspergillus oryzae and Rhizopus stolonifer at 1.0 mg/ml concentration of stalk extract. Peel extract inhibited A.

  5. Treatment of some Textile Industrial Effluents using Dry Corn Stalk ...

    African Journals Online (AJOL)

    Corn stalk ground to various mesh sizes was used to treat textile effluents obtained from three different industries. These effluents were first pretreated with alum and then charcoal; passing the water through a column, (20cm long and 5cm diameter) containing the ground corn stalk of size diameters of 300mm, 355mm ...

  6. Stalking als Straftatbestand : Neue Tendenzen in den EU-Mitgliedstaaten

    NARCIS (Netherlands)

    van der Aa, Suzanne; Bachman, Roland; Ortiz-Müller, Wolf

    2017-01-01

    Article 34 of the Council of Europe Convention on Preventing and Combating Violence against Women and Domestic Violence obliges signatory states to criminalize stalking. This article provides an inventory of criminal anti-stalking legislation in the 28 EU Member States in order to see whether they

  7. 78 FR 1125 - National Stalking Awareness Month, 2013

    Science.gov (United States)

    2013-01-07

    ... some point in their lives, 1 in 6 women and 1 in 19 men will be stalked, and many of these crimes will.... It can include implied or explicit threats; harassment; or nonconsensual communication through phone..., stalking tends to escalate over time, and it is sometimes followed by sexual assault or homicide. My...

  8. Bio-oil production from cotton stalk

    International Nuclear Information System (INIS)

    Zheng Jilu; Yi Weiming; Wang Nana

    2008-01-01

    Cotton stalk was fast pyrolyzed at temperatures between 480 deg. C and 530 deg. C in a fluidized bed, and the main product of bio-oil is obtained. The experimental result shows that the highest bio-oil yield of 55 wt% was obtained at 510 deg. C for cotton stalk. The chemical composition of the bio-oil acquired was analyzed by GC-MS, and its heat value, stability, miscibility and corrosion characteristics were determined. These results showed that the bio-oil obtained can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles. Furthermore, the energy performance of the pyrolysis process was analyzed. In the pyrolysis system used in our experiment, some improvements to former pyrolysis systems are done. Two screw feeders were used to prevent jamming the feeding system, and the condenser is equipped with some nozzles and a heat exchanger to cool quickly the cleaned hot gas into bio-oil

  9. [Mental health impact of stalking in men and women].

    Science.gov (United States)

    Kuehner, Christine; Gass, Peter; Dressing, Harald

    2006-08-01

    Using data from the Mannheim stalking study, the present report analyses gender differences with regard to various mental health indicators and potential mediator effects of stalking victimization. Furthermore, we were interested in whether the impact of stalking on mental health was comparable for men and women. The study included a postal survey of 675 community residents on the experience of intruding harassment and on mental health indicators. In the Patient Health Questionnaire (PHQ-D, Lowe et al. 2001), women scored higher on most of the subscales (depression, anxiety, somatic complaints, stress, psychosocial impairment) than men. Furthermore, more women fulfilled criteria for at least one threshold or subthreshold mental disorder syndrome according to DSM-IV, and more women were under psychotropic medication. However, the identified associations were completely mediated by the higher prevalence of stalking victims in women. In contrast, the associations of stalking victimization with poor mental health, psychosocial functioning, and use of medication were largely comparable across gender.

  10. [Anaerobic co-digestion of corn stalk and vermicompost].

    Science.gov (United States)

    Chen, Guang-yin; Zheng, Zheng; Zou, Xing-xing; Fang, Cai-xia; Luo, Yan

    2010-02-01

    The characteristics of corn stalk digested alone at different total solid (TS) loading rates and co-digestion of various proportions of corn stalk and vermicompost were investigated by batch model at 35 degrees C +/- 1 degrees C. The organic loading rates (OLRs) studied were in the range of 1.2%-6.0% TS and increasing proportions of vermicompost from 20% to 80% TS. A maximum methane yield of corn stalk digested alone was 217.60 mL/g obtained at the TS loading rate of 4.8%. However, when the TS loading rate was 6.0%, the anaerobic system was acidified and the lowest pH value was 5.10 obtained on day 4 and the biogas productivity decreased. Furthermore, co-digestion of vermicompost and corn stalk in varying proportions were investigated at constant of 6.0% TS. Co-digestion with vermicompost improved the biodegradability of corn stalk and the methane yield was improved by 4.42%-58.61%, and led to higher pH values, higher volatile fatty acids (VFAs) concentration and lower alkalinity content compared with corn stalk digested alone. The maximum biogas yield and methane yield of 410.30 mL/g and 259. 35 mL/g were obtained for 40% vermicompost and 60% corn stalk respectively. Compared with corn stalk digested alone, co-digested with vermicompost didn' t affect methane content and the fermentation type, but promoted the destruction of crystalline of cellulose and the highest destruction rate was 29.36% for 40% vermicompost and 60% corn stalk. Therefore, adding vermicompost was beneficial for the decomposition and increasing the biotransformation rate of corn stalk.

  11. Requirement for PLK1 kinase activity in the maintenance of a robust spindle assembly checkpoint

    Directory of Open Access Journals (Sweden)

    Aisling O'Connor

    2016-01-01

    Full Text Available During mitotic arrest induced by microtubule targeting drugs, the weakening of the spindle assembly checkpoint (SAC allows cells to progress through the cell cycle without chromosome segregation occurring. PLK1 kinase plays a major role in mitosis and emerging evidence indicates that PLK1 is also involved in establishing the checkpoint and maintaining SAC signalling. However, mechanistically, the role of PLK1 in the SAC is not fully understood, with several recent reports indicating that it can cooperate with either one of the major checkpoint kinases, Aurora B or MPS1. In this study, we assess the role of PLK1 in SAC maintenance. We find that in nocodazole-arrested U2OS cells, PLK1 activity is continuously required for maintaining Aurora B protein localisation and activity at kinetochores. Consistent with published data we find that upon PLK1 inhibition, phosphoThr3-H3, a marker of Haspin activity, is reduced. Intriguingly, Aurora B inhibition causes PLK1 to relocalise from kinetochores into fewer and much larger foci, possibly due to incomplete recruitment of outer kinetochore proteins. Importantly, PLK1 inhibition, together with partial inhibition of Aurora B, allows efficient SAC override to occur. This phenotype is more pronounced than the phenotype observed by combining the same PLK1 inhibitors with partial MPS1 inhibition. We also find that PLK1 inhibition does not obviously cooperate with Haspin inhibition to promote SAC override. These results indicate that PLK1 is directly involved in maintaining efficient SAC signalling, possibly by cooperating in a positive feedback loop with Aurora B, and that partially redundant mechanisms exist which reinforce the SAC.

  12. ASF1 is required to load histones on the HIRA complex in preparation of paternal chromatin assembly at fertilization.

    Science.gov (United States)

    Horard, Béatrice; Sapey-Triomphe, Laure; Bonnefoy, Emilie; Loppin, Benjamin

    2018-05-11

    Anti-Silencing Factor 1 (ASF1) is a conserved H3-H4 histone chaperone involved in both Replication-Coupled and Replication-Independent (RI) nucleosome assembly pathways. At DNA replication forks, ASF1 plays an important role in regulating the supply of H3.1/2 and H4 to the CAF-1 chromatin assembly complex. ASF1 also provides H3.3-H4 dimers to HIRA and DAXX chaperones for RI nucleosome assembly. The early Drosophila embryo is an attractive system to study chromatin assembly in a developmental context. The formation of a diploid zygote begins with the unique, genome-wide RI assembly of paternal chromatin following sperm protamine eviction. Then, within the same cytoplasm, syncytial embryonic nuclei undergo a series of rapid, synchronous S and M phases to form the blastoderm embryo. Here, we have investigated the implication of ASF1 in these two distinct assembly processes. We show that depletion of the maternal pool of ASF1 with a specific shRNA induces a fully penetrant, maternal effect embryo lethal phenotype. Unexpectedly, despite the depletion of ASF1 protein to undetectable levels, we show that asf1 knocked-down (KD) embryos can develop to various stages, thus demonstrating that ASF1 is not absolutely required for the amplification of cleavage nuclei. Remarkably, we found that ASF1 is required for the formation of the male pronucleus, although ASF1 protein does not reside in the decondensing sperm nucleus. In asf1 KD embryos, HIRA localizes to the male nucleus but is only capable of limited and insufficient chromatin assembly. Finally, we show that the conserved HIRA B domain, which is involved in ASF1-HIRA interaction, is dispensable for female fertility. We conclude that ASF1 is critically required to load H3.3-H4 dimers on the HIRA complex prior to histone deposition on paternal DNA. This separation of tasks could optimize the rapid assembly of paternal chromatin within the gigantic volume of the egg cell. In contrast, ASF1 is surprisingly dispensable for the

  13. Nature & prevalence of stalking among New Zealand mental health clinicians.

    Science.gov (United States)

    Hughes, Frances A; Thom, Katey; Dixon, Robyn

    2007-04-01

    Stalking involves recurrent and persistent unwanted communication or contact that generates fear for safety in the victims. This pilot study evaluated the nature and prevalence of stalking among New Zealand nurses and physicians working in mental health services. An anonymous questionnaire asking respondents to describe their experiences with 12 stalking behaviors was distributed to 895 clinicians. Results indicated that regardless of discipline, women were more likely than men to have experienced one or more stalking behaviors, including receiving unwanted telephone calls, letters, and approaches; receiving personal threats: and being followed, spied on, or subject to surveillance. Women also reported higher levels of fearfulness as a consequence of stalking behaviors. Nearly half of the stalkers were clients; the remaining were former partners, colleagues, or acquaintances. In client-related cases, the majority of respondents told their colleagues and supervisors first, and the majority found them to be the most helpful resource. The results of this pilot study indicate a need for further research focused on the stalking of mental health clinicians in New Zealand and for development of workplace policies for adequate response to the stalking of mental health clinicians.

  14. Chlamydomonas IFT25 is dispensable for flagellar assembly but required to export the BBSome from flagella

    Directory of Open Access Journals (Sweden)

    Bin Dong

    2017-11-01

    Full Text Available Intraflagellar transport (IFT particles are composed of polyprotein complexes IFT-A and IFT-B as well as cargo adaptors such as the BBSome. Two IFT-B subunits, IFT25 and IFT27 were found to form a heterodimer, which is essential in exporting the BBSome out of the cilium but not involved in flagellar assembly and cytokinesis in vertebrates. Controversial results were, however, recorded to show that defects in IFT, flagellar assembly and even cytokinesis were caused by IFT27 knockdown in Chlamydomonas reinhardtii. Using C. reinhardtii as a model organism, we report that depletion of IFT25 has no effect on flagellar assembly and does not affect the entry of the BBSome into the flagellum, but IFT25 depletion did impair BBSome movement out of the flagellum, clarifying the evolutionally conserved role of IFT25 in regulating the exit of the BBSome from the flagellum cross species. Interestingly, depletion of IFT25 causes dramatic reduction of IFT27 as expected, which does not cause defects in flagellar assembly and cytokinesis in C. reinhardtii. Our data thus support that Chlamydomonas IFT27, like its vertebrate homologues, is not involved in flagellar assembly and cytokinesis.

  15. Stalking Victimization in LGBTQ Adults: A Brief Report.

    Science.gov (United States)

    Langenderfer-Magruder, Lisa; Walls, N Eugene; Whitfield, Darren L; Kattari, Shanna K; Ramos, Daniel

    2017-03-01

    Stalking is often considered to be a form of interpersonal violence; yet, despite an increase in lesbian, gay, bisexual, transgender, and queer (LGBTQ)-specific research on other forms of interpersonal violence, such as intimate partner violence and sexual assault, there is a relative lack of literature on stalking victimization of LGBTQ individuals, particularly as it relates to gender identity. This is problematic given the results of numerous studies indicating LGBTQ individuals, and transgender individuals in particular, experience victimization in various forms and contexts at alarming rates. In the current study, we examined secondary data to determine the prevalence of lifetime stalking victimization and subsequent police reporting in a large community-based sample of LGBTQ individuals living in Colorado ( N = 1,116). In addition, using chi-square analyses, we examined independence of stalking experiences and police reporting by both gender identity ( transgender, cisgender male, cisgender female) and sexual orientation ( gay, lesbian, bisexual, heterosexual, queer, other). Approximately 15% of the total sample reported ever experiencing stalking; yet, only about one quarter of those who were stalked reported it to police. Although no statistically significant differences emerged by gender identity or sexual orientation, transgender, bisexual, and queer participants had the highest prevalence of lifetime stalking victimization. Moreover, these groups reported the lowest prevalence of reporting their victimization to the police. We provide suggestions to improve the development of research on this topic including a need for an inclusive definition of stalking and studies using larger, representative samples to better discern potential significant differences in stalking experiences of LGBTQ persons.

  16. The prevalence and nature of stalking in the Australian community.

    Science.gov (United States)

    Purcell, Rosemary; Pathé, Michele; Mullen, Paul E

    2002-02-01

    This study examines the extent and nature of stalking victimisation in a random community sample. A postal survey was distributed to 3700 adult men and women selected from the electoral roll in the State of Victoria. Outcome measures included the lifetime and annual cumulative incidence of stalking, the duration and methods of harassment, rates of associated violence and responses to victimisation. Almost one in four respondents (23.4%;432) had been stalked, the unwanted behaviour they were subjected to being both repeated and fear-provoking. One in 10 (197) had experienced a protracted course of stalking involving multiple intrusions spanning a period of at least one month. Women were twice as likely as men to report having been stalked at some time in their lives, though the rates of victimisation in the 12 months prior to the study did not differ significantly according to gender. Younger people were significantly more likely than older respondents to report having been stalked. Victims were pursued by strangers in 42% of cases. The most common methods of harassment involved unwanted telephone calls, intrusive approaches and following. Associated threats (29%) and physical assaults (18%) frequently arose out of the stalking. Significant social and economic disruption was created by the stalking for 63% of victims. Most sought assistance to manage their predicament (69%). The experience of being stalked is common and appears to be increasing. Ten percent of people have been subjected at some time to an episode of protracted harassment. Assaults by stalkers are disturbingly frequent. Most victims report significant disruption to their daily functioning irrespective of exposure to associated violence.

  17. Evaluation of elastic modulus and hardness of crop stalks cell walls by nano-indentation

    Science.gov (United States)

    Yan Wu; Siqun Wang; Dingguo Zhou; Cheng Xing; Yang Zhang; Zhiyong Cai

    2010-01-01

    Agricultural biomaterials such as crop stalks are natural sources of cellulosic fiber and have great potential as reinforced materials in bio-composites. In order to evaluate their potential as materials for reinforcement, the nano-mechanical properties of crop-stalk cell walls, i.e. those of cotton (Gossypium herbaceu) stalk, soybean (Glycine max) stalk, cassava (...

  18. The γ-tubulin complex in Trypanosoma brucei: molecular composition, subunit interdependence and requirement for axonemal central pair protein assembly

    Science.gov (United States)

    Zhou, Qing; Li, Ziyin

    2015-01-01

    The γ-tubulin complex constitutes a key component of the microtubule-organizing center and nucleates microtubule assembly. This complex differs in complexity in different organisms: the budding yeast contains the γ-tubulin small complex (γTuSC) composed of γ-tubulin, GCP2 and GCP3, whereas animals contain the γ-tubulin ring complex (γTuRC) composed of γTuSC and three additional proteins, GCP4, GCP5 and GCP6. In Trypanosoma brucei, the composition of the γ-tubulin complex remains elusive, and it is not known whether it also regulates assembly of the subpellicular microtubules and the spindle microtubules. Here we report that the γ-tubulin complex in T. brucei is composed of γ-tubulin and three GCP proteins, GCP2-GCP4, and is primarily localized in the basal body throughout the cell cycle. Depletion of GCP2 and GCP3, but not GCP4, disrupted the axonemal central pair microtubules, but not the subpellicular microtubules and the spindle microtubules. Furthermore, we showed that the γTuSC is required for assembly of two central pair proteins and that γTuSC subunits are mutually required for stability. Together, these results identified an unusual γ-tubulin complex in T. brucei, uncovered an essential role of γTuSC in central pair protein assembly, and demonstrated the interdependence of individual γTuSC components for maintaining a stable complex. PMID:26224545

  19. Stalking: terrorism at our doors--how social workers can help victims fight back.

    Science.gov (United States)

    Spitz, Mary-Ann Leitz

    2003-10-01

    Stalking is a dangerous and devastating crime that irrevocably changes the lives of victims but is frequently misunderstood and minimized. Victims report that their lives are never the same after they have been stalked. Stalking is prevalent and gender-neutral and occurs across all socioeconomic lines and in all clinical settings. The prevalence of stalking provides many opportunities for social workers to intervene, but first they must recognize and understand the problem. This article explains common misconceptions about stalking, contains a brief discussion of the types of stalking, the elements necessary to criminally charge someone with stalking, strategies for the victims, and suggestions for future research.

  20. Stalking: The term, features and proposals de lege ferenda

    Directory of Open Access Journals (Sweden)

    Ranđelović Višnja M.

    2016-01-01

    Full Text Available In the paper author analyzes main features of stalking, which is recognized as a serious problem in many countries and provided as a criminal offense. There are presented comparative legela solutions of this criminal offense in the countries that have incriminated it firs, as well as in neighboring countries. In recent years in Republic of Serbia it has been indicated to prevalence of the stalking, especially among the former partners, and considering that there is a need for such behavior to be incriminated. Also, Serbia's ratification of the Council of Europe Convention on Preventing and Combating Violence against Women and Domestic Violence assumed an obligation to prescribe stalking as criminal offense. This paper proposes the possible way of prescribing stalking with analysis of certain elements of the legal description.

  1. 24 CFR 5.2005 - Protection of victims of domestic violence, dating violence, and stalking in public and Section 8...

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Protection of victims of domestic violence, dating violence, and stalking in public and Section 8 housing. 5.2005 Section 5.2005 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development GENERAL HUD PROGRAM REQUIREMENTS; WAIVERS Protection for...

  2. Size reduction of high- and low-moisture corn stalks by linear knife grid system

    Energy Technology Data Exchange (ETDEWEB)

    Igathinathane, C. [Agricultural and Biological Engineering Department, 130 Creelman Street, Mississippi State University, Mississippi State, Mississippi 39762 (United States); Womac, A.R. [Department of Biosystems Engineering and Soil Science, 2506 E. J. Chapman Drive, The University of Tennessee, Knoxville, Tennessee 37996 (United States); Sokhansanj, S. [Oak Ridge National Laboratory, Environmental Sciences Division, Oak Ridge, P. O. Box 2008, Tennessee 37831 (United States); Narayan, S. [First American Scientific Company, 100 Park Royal South West Vancouver, British Columbia, V7T 1A2 (Canada)

    2009-04-15

    High- and low-moisture corn stalks were tested using a linear knife grid size reduction device developed for first-stage size reduction. The device was used in conjunction with a universal test machine that quantified shearing stress and energy characteristics for forcing a bed of corn stalks through a grid of sharp knives. No published engineering performance data for corn stover with similar devices are available to optimize performance; however, commercial knife grid systems exist for forage size reduction. From the force-displacement data, mean and maximum ultimate shear stresses, cumulative and peak mass-based cutting energies for corn stalks, and mean new surface area-based cutting energies were determined from 4-5 refill runs at two moisture contents (78.8% and 11.3% wet basis), three knife grid spacings (25.4, 50.8, and 101.6 mm), and three bed depths (50.8, 101.6, and 152.4 mm). In general, the results indicated that peak failure load, ultimate shear stress, and cutting energy values varied directly with bed depth and inversely with knife grid spacing. Mean separation analysis established that high- and low-moisture conditions and bed depths {>=} 101.6 mm did not differ significantly (P < 0.05) for ultimate stress and cutting energy values, but knife grid spacing were significantly different. Linear knife grid cutting energy requirements for both moisture conditions of corn stalks were much smaller than reported cutting energy requirements. Ultimate shear stress and cutting energy results of this research should aid the engineering design of commercial scale linear knife gird size reduction equipment for various biomass feedstocks. (author)

  3. Arc Requires PSD95 for Assembly into Postsynaptic Complexes Involved with Neural Dysfunction and Intelligence

    Directory of Open Access Journals (Sweden)

    Esperanza Fernández

    2017-10-01

    Full Text Available Arc is an activity-regulated neuronal protein, but little is known about its interactions, assembly into multiprotein complexes, and role in human disease and cognition. We applied an integrated proteomic and genetic strategy by targeting a tandem affinity purification (TAP tag and Venus fluorescent protein into the endogenous Arc gene in mice. This allowed biochemical and proteomic characterization of native complexes in wild-type and knockout mice. We identified many Arc-interacting proteins, of which PSD95 was the most abundant. PSD95 was essential for Arc assembly into 1.5-MDa complexes and activity-dependent recruitment to excitatory synapses. Integrating human genetic data with proteomic data showed that Arc-PSD95 complexes are enriched in schizophrenia, intellectual disability, autism, and epilepsy mutations and normal variants in intelligence. We propose that Arc-PSD95 postsynaptic complexes potentially affect human cognitive function.

  4. Behavioral and Mental Health Correlates of Youth Stalking Victimization

    Science.gov (United States)

    Reidy, Dennis E.; Smith-Darden, Joanne P.; Kernsmith, Poco D.

    2018-01-01

    Introduction Although recognized as a public health problem, little attention has been paid to the problem of stalking among youth. Latent profile analysis was used to identify latent groups of adolescent stalking victims and their behavioral and mental health correlates. Methods A cross-sectional sample of 1,236 youths were randomly selected from 13 schools stratified by community risk level (i.e., low, moderate, and high risk) and gender. Students completed surveys assessing behavioral indicators of stalking victimization, as well as substance use, sexual behavior, dating violence, and psychiatric symptoms. Data were collected in 2013 and data analyses were performed in 2015. Results Analysis indicated the presence of a non-victim class, a minimal exposure class, and a victim class for boys and girls alike. Approximately 14% of girls and 13% of boys were in the stalking victim class. Adolescents in the victim class reported more symptoms of post-traumatic stress, mood disorder, and hopelessness, as well as more instances of alcohol use, binge drinking, and physical dating violence victimization. Girls in the victim class also reported engaging in sexting behaviors and oral sex with significantly more partners than their non-victim peers. Conclusions These findings provide valuable knowledge of the prevalence and pertinent health correlates of stalking victimization in adolescence. The data suggest a substantial proportion of adolescents are victims of stalking and are likewise at risk for a number of deleterious health outcomes. As such, this population merits further attention by prevention researchers and practitioners. PMID:27743623

  5. Stalk-length-dependence of the contractility of Vorticella convallaria

    Science.gov (United States)

    Gul Chung, Eun; Ryu, Sangjin

    2017-12-01

    Vorticella convallaria is a sessile protozoan of which the spasmoneme contracts on a millisecond timescale. Because this contraction is induced and powered by the binding of calcium ions (Ca2+), the spasmoneme showcases Ca2+-powered cellular motility. Because the isometric tension of V. convallaria increases linearly with its stalk length, it is hypothesized that the contractility of V. convallaria during unhindered contraction depends on the stalk length. In this study, the contractile force and energetics of V. convallaria cells of different stalk lengths were evaluated using a fluid dynamic drag model which accounts for the unsteadiness and finite Reynolds number of the water flow caused by contracting V. convallaria and the wall effect of the no-slip substrate. It was found that the contraction displacement, peak contraction speed, peak contractile force, total mechanical work, and peak power depended on the stalk length. The observed stalk-length-dependencies were simulated using a damped spring model, and the model estimated that the average spring constant of the contracting stalk was 1.34 nN µm-1. These observed length-dependencies of Vorticella’s key contractility parameters reflect the biophysical mechanism of the spasmonemal contraction, and thus they should be considered in developing a theoretical model of the Vorticella spasmoneme.

  6. An accessory protein required for anchoring and assembly of amyloid fibres in B. subtilis biofilms.

    Science.gov (United States)

    Romero, Diego; Vlamakis, Hera; Losick, Richard; Kolter, Roberto

    2011-06-01

    Cells within Bacillus subtilis biofilms are held in place by an extracellular matrix that contains cell-anchored amyloid fibres, composed of the amyloidogenic protein TasA. As biofilms age they disassemble because the cells release the amyloid fibres. This release appears to be the consequence of incorporation of D-tyrosine, D-leucine, D-tryptophan and D-methionine into the cell wall. Here, we characterize the in vivo roles of an accessory protein TapA (TasA anchoring/assembly protein; previously YqxM) that serves both to anchor the fibres to the cell wall and to assemble TasA into fibres. TapA is found in discrete foci in the cell envelope and these foci disappear when cells are treated with a mixture of D-amino acids. Purified cell wall sacculi retain a functional form of this anchoring protein such that purified fibres can be anchored to the sacculi in vitro. In addition, we show that TapA is essential for the proper assembly of the fibres. Its absence results in a dramatic reduction in TasA levels and what little TasA is left produces only thin fibres that are not anchored to the cell. © 2011 Blackwell Publishing Ltd.

  7. An Accessory Protein Required for Anchoring and Assembly of Amyloid Fibers in B. subtilis Biofilms

    Science.gov (United States)

    Romero, Diego; Vlamakis, Hera; Losick, Richard; Kolter, Roberto

    2011-01-01

    Cells within Bacillus subtilis biofilms are held in place by an extracellular matrix that contains cell-anchored amyloid fibers, composed of the amyloidogenic protein TasA. As biofilms age they disassemble because the cells release the amyloid fibers. This release appears to be the consequence of incorporation of D-tyrosine, D-leucine, D-tryptophan and D-methionine into the cell wall. Here, we characterize the in vivo roles of an accessory protein TapA (TasA anchoring/assembly protein; previously YqxM) that serves both to anchor the fibers to the cell wall and to assemble TasA into fibers. TapA is found in discrete foci in the cell envelope and these foci disappear when cells are treated with a mixture of D-amino acids. Purified cell wall sacculi retain a functional form of this anchoring protein such that purified fibers can be anchored to the sacculi in vitro. In addition, we show that TapA is essential for the proper assembly of the fibers. Its absence results in a dramatic reduction in TasA levels and what little TasA is left produces only thin fibers that are not anchored to the cell. PMID:21477127

  8. Some assembly required: Contributions of Tom Stevens' lab to the V-ATPase field.

    Science.gov (United States)

    Graham, Laurie A; Finnigan, Gregory C; Kane, Patricia M

    2018-06-01

    Tom Stevens' lab has explored the subunit composition and assembly of the yeast V-ATPase for more than 30 years. Early studies helped establish yeast as the predominant model system for study of V-ATPase proton pumps and led to the discovery of protein splicing of the V-ATPase catalytic subunit. The Vma - phenotype, characteristic of loss-of-V-ATPase activity in yeast was key in determining the enzyme's subunit composition via yeast genetics. V-ATPase subunit composition proved to be highly conserved among eukaryotes. Genetic screens for new vma mutants led to identification of a set of dedicated V-ATPase assembly factors and helped unravel the complex pathways for V-ATPase assembly. In later years, exploration of the evolutionary history of several V-ATPase subunits provided new information about the enzyme's structure and function. This review highlights V-ATPase work in the Stevens' lab between 1987 and 2017. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Calcium-binding capacity of centrin2 is required for linear POC5 assembly but not for nucleotide excision repair.

    Directory of Open Access Journals (Sweden)

    Tiago J Dantas

    Full Text Available Centrosomes, the principal microtubule-organising centres in animal cells, contain centrins, small, conserved calcium-binding proteins unique to eukaryotes. Centrin2 binds to xeroderma pigmentosum group C protein (XPC, stabilising it, and its presence slightly increases nucleotide excision repair (NER activity in vitro. In previous work, we deleted all three centrin isoforms present in chicken DT40 cells and observed delayed repair of UV-induced DNA lesions, but no centrosome abnormalities. Here, we explore how centrin2 controls NER. In the centrin null cells, we expressed centrin2 mutants that cannot bind calcium or that lack sites for phosphorylation by regulatory kinases. Expression of any of these mutants restored the UV sensitivity of centrin null cells to normal as effectively as expression of wild-type centrin. However, calcium-binding-deficient and T118A mutants showed greatly compromised localisation to centrosomes. XPC recruitment to laser-induced UV-like lesions was only slightly slower in centrin-deficient cells than in controls, and levels of XPC and its partner HRAD23B were unaffected by centrin deficiency. Interestingly, we found that overexpression of the centrin interactor POC5 leads to the assembly of linear, centrin-dependent structures that recruit other centrosomal proteins such as PCM-1 and NEDD1. Together, these observations suggest that assembly of centrins into complex structures requires calcium binding capacity, but that such assembly is not required for centrin activity in NER.

  10. A stalk of grain and light

    Directory of Open Access Journals (Sweden)

    Erín Moure

    2010-11-01

    Full Text Available "Stalk of Grain and Light" is an excerpt from O Resplandor (Toronto: Anansi, forthcoming 2010, a book of poetry that explodes notions of authorship and translation. In it, the heteronymic character Elisa Sampedrín translates from Nichita Stãnescu, though she knows no Romanian, and the orthonymic character Erín Moure translates Paul Celan, using not Celan but English transcreations from the language of Celan by Oana Avasilichioaei which she appropriates and reorganizes to create the true translation of a poem by Paul Celan, which exists only in her mind. In this world where corporations copyright human cells, where academics and libraries appropriate works of writers, and where writing itself - moreso than visual art - is limited by expanded notions of plagiarism and ownership, of continuity of copyright for decades that prevents works from influencing art's future, Moure refutes the idea that writing is inspired out of nowhere. Here it is rooted to human interaction, to love and loss, to the art of others, and is dedicated to creating a world where the free irruption of thought is possible, and lineages are acknowledged.

  11. A stalk of grain and light

    Directory of Open Access Journals (Sweden)

    Erín Moure

    2009-01-01

    Full Text Available http://dx.doi.org/10.5007/2175-8026.2009n56p33 "Stalk of Grain and Light" is an excerpt from O Resplandor (Toronto: Anansi, forthcoming 2010, a book of poetry that explodes notions of authorship and translation. In it, the heteronymic character Elisa Sampedrín translates from Nichita Stãnescu, though she knows no Romanian, and the orthonymic character Erín Moure translates Paul Celan, using not Celan but English transcreations from the language of Celan by Oana Avasilichioaei which she appropriates and reorganizes to create the true translation of a poem by Paul Celan, which exists only in her mind. In this world where corporations copyright human cells, where academics and libraries appropriate works of writers, and where writing itself - moreso than visual art - is limited by expanded notions of plagiarism and ownership, of continuity of copyright for decades that prevents works from influencing art's future, Moure refutes the idea that writing is inspired out of nowhere. Here it is rooted to human interaction, to love and loss, to the art of others, and is dedicated to creating a world where the free irruption of thought is possible, and lineages are acknowledged.

  12. De novo centriole formation in human cells is error-prone and does not require SAS-6 self-assembly.

    Science.gov (United States)

    Wang, Won-Jing; Acehan, Devrim; Kao, Chien-Han; Jane, Wann-Neng; Uryu, Kunihiro; Tsou, Meng-Fu Bryan

    2015-11-26

    Vertebrate centrioles normally propagate through duplication, but in the absence of preexisting centrioles, de novo synthesis can occur. Consistently, centriole formation is thought to strictly rely on self-assembly, involving self-oligomerization of the centriolar protein SAS-6. Here, through reconstitution of de novo synthesis in human cells, we surprisingly found that normal looking centrioles capable of duplication and ciliation can arise in the absence of SAS-6 self-oligomerization. Moreover, whereas canonically duplicated centrioles always form correctly, de novo centrioles are prone to structural errors, even in the presence of SAS-6 self-oligomerization. These results indicate that centriole biogenesis does not strictly depend on SAS-6 self-assembly, and may require preexisting centrioles to ensure structural accuracy, fundamentally deviating from the current paradigm.

  13. γ-Tubulin complex in Trypanosoma brucei: molecular composition, subunit interdependence and requirement for axonemal central pair protein assembly.

    Science.gov (United States)

    Zhou, Qing; Li, Ziyin

    2015-11-01

    γ-Tubulin complex constitutes a key component of the microtubule-organizing center and nucleates microtubule assembly. This complex differs in complexity in different organisms: the budding yeast contains the γ-tubulin small complex (γTuSC) composed of γ-tubulin, gamma-tubulin complex protein (GCP)2 and GCP3, whereas animals contain the γ-tubulin ring complex (γTuRC) composed of γTuSC and three additional proteins, GCP4, GCP5 and GCP6. In Trypanosoma brucei, the composition of the γ-tubulin complex remains elusive, and it is not known whether it also regulates assembly of the subpellicular microtubules and the spindle microtubules. Here we report that the γ-tubulin complex in T. brucei is composed of γ-tubulin and three GCP proteins, GCP2-GCP4, and is primarily localized in the basal body throughout the cell cycle. Depletion of GCP2 and GCP3, but not GCP4, disrupted the axonemal central pair microtubules, but not the subpellicular microtubules and the spindle microtubules. Furthermore, we showed that the γTuSC is required for assembly of two central pair proteins and that γTuSC subunits are mutually required for stability. Together, these results identified an unusual γ-tubulin complex in T. brucei, uncovered an essential role of γTuSC in central pair protein assembly, and demonstrated the interdependence of individual γTuSC components for maintaining a stable complex. © 2015 John Wiley & Sons Ltd.

  14. AREVA's fuel assemblies addressing high performance requirements of the worldwide PWR fleet

    International Nuclear Information System (INIS)

    Anniel, Marc; Bordy, Michel-Aristide

    2009-01-01

    Taking advantage of its presence in the fuel activities since the start of commercial nuclear worldwide operation, AREVA is continuing to support the customers with the priority on reliability, to: >participate in plant operational performance for the in core fuel reliability, the Zero Tolerance for Failure ZTF as a continuous improvement target and the minimisation of manufacturing/quality troubles, >guarantee the supply chain a proven product stability and continuous availability, >support performance improvements with proven design and technology for fuel management updating and cycle cost optimization, >support licensing assessments for fuel assembly and reloads, data/methodologies/services, >meet regulatory challenges regarding new phenomena, addressing emergent performance issues and emerging industry challenges for changing operating regimes. This capacity is based on supplies by AREVA accumulating very large experience both in manufacturing and in plant operation, which is demonstrated by: >manufacturing location in 4 countries including 9 fuel factories in USA, Germany, Belgium and France. Up to now about 120,000 fuel assemblies and 8,000 RCCA have been released to PWR nuclear countries, from AREVA European factories, >irradiation performed or in progress in about half of PWR world wide nuclear plants. Our optimum performances cover rod burn ups of to 82GWD/tU and fuel assemblies successfully operated under various world wide fuel management types. AREVA's experience, which is the largest in the world, has the extensive support of the well known fuel components such as the M5'TM'cladding, the MONOBLOC'TM'guide tube, the HTP'TM' and HMP'TM' structure components and the comprehensive services brought in engineering, irradiation and post irradiation fields. All of AREVA's fuel knowledge is devoted to extend the definition of fuel reliability to cover the whole scope of fuel vendor support. Our Top Reliability and Quality provide customers with continuous

  15. Health Care Professionals as Victims of Stalking: Characteristics of the Stalking Campaign, Consequences, and Motivation in Italy.

    Science.gov (United States)

    Acquadro Maran, Daniela; Varetto, Antonella; Zedda, Massimo; Franscini, Monica

    2015-07-05

    Stalking is a phenomenon characterized by a set of repetitive behaviors, intrusive surveillance, control, communication, and search of contact with a victim who is afraid and/or worried and/or annoyed by such unwanted attention. Literature analysis shows that Health Care Professionals (HCPs) are at greater risk of being stalked than the general population. As described by Mullen, Pathé, Purcell, and Stuart, stalkers may have different motives: relational rejection, an infatuation, an inability to express their own emotions and recognize those of others, or a desire for revenge. The aim of this study was to explore stalkers' motivation as perceived by their victims, characteristics of stalking campaigns, and consequences. A copy of the Italian modified version of The Network for Surviving Stalking (NSS) Questionnaire on Stalking, the Beck Depression Inventory (BDI) and the State Trait Inventory (STAI) Y1-Y2 scales were distributed in six Italian state hospitals. Participants included 1,842 HCPs, 256 (13.9%) of which had been victims. The majority of victims reported that stalkers were Rejected (96, 37.5%), Intimacy seekers (41, 16%), Incompetent suitors (60, 23.4%), and/or Resentful (43, 16.8%; χ 2 = 163.3, p = .001). Stalking campaigns were characterized by several behaviors, principally contact (by telephone calls, text message) and following. The stalking campaign caused in victims both physical and emotional consequences, the most frequent being weight changes, sleep disorders, weakness, apprehension, anger, and fear. The most used coping strategies were moving away and moving toward, the less used was moving inward. Intervention programs and preventive measures (both individual and organizational) for HCP victims and those who could be considered at risk are also discussed. © The Author(s) 2015.

  16. Selective Predation of a Stalking Predator on Ungulate Prey.

    Directory of Open Access Journals (Sweden)

    Marco Heurich

    Full Text Available Prey selection is a key factor shaping animal populations and evolutionary dynamics. An optimal forager should target prey that offers the highest benefits in terms of energy content at the lowest costs. Predators are therefore expected to select for prey of optimal size. Stalking predators do not pursue their prey long, which may lead to a more random choice of prey individuals. Due to difficulties in assessing the composition of available prey populations, data on prey selection of stalking carnivores are still scarce. We show how the stalking predator Eurasian lynx (Lynx lynx selects prey individuals based on species identity, age, sex and individual behaviour. To address the difficulties in assessing prey population structure, we confirm inferred selection patterns by using two independent data sets: (1 data of 387 documented kills of radio-collared lynx were compared to the prey population structure retrieved from systematic camera trapping using Manly's standardized selection ratio alpha and (2 data on 120 radio-collared roe deer were analysed using a Cox proportional hazards model. Among the larger red deer prey, lynx selected against adult males-the largest and potentially most dangerous prey individuals. In roe deer lynx preyed selectively on males and did not select for a specific age class. Activity during high risk periods reduced the risk of falling victim to a lynx attack. Our results suggest that the stalking predator lynx actively selects for size, while prey behaviour induces selection by encounter and stalking success rates.

  17. Structural characterization of lignin from grape stalks (Vitis vinifera L.).

    Science.gov (United States)

    Prozil, Sónia O; Evtuguin, Dmitry V; Silva, Artur M S; Lopes, Luísa P C

    2014-06-18

    The chemical structure of lignin from grape stalks, an abundant waste of winemaking, has been studied. The dioxane lignin was isolated from extractive- and protein-free grape stalks (Vitis vinifera L.) by modified acidolytic procedure and submitted to a structural analysis by wet chemistry (nitrobenzene and permanganate oxidation (PO)) and spectroscopic techniques. The results obtained suggest that grape stalk lignin is an HGS type with molar proportions of p-hydroxyphenyl (H), guaiacyl (G) and syringyl (S) units of 3:71:26. Structural analysis by (1)H and (13)C NMR spectroscopy and PO indicates the predominance of β-O-4' structures (39% mol) in grape stalk lignin together with moderate amounts of β-5', β-β, β-1', 5-5', and 4-O-5' structures. NMR studies also revealed that grape lignin should be structurally associated with tannins. The condensation degree of grape stalks lignin is higher than that of conventional wood lignins and lignins from other agricultural residues.

  18. Experimental Study of an Assembly with Extreme Particulate, Molecular, and Biological Requirements in Different Environmental Scenarios from Quality Point of View

    Science.gov (United States)

    Müller, A.; Urich, D.; Kreck, G.; Metzmacher, M.; Lindner, R.

    2018-04-01

    The presentation will cover results from an ESA supported investigation to collect lessons learned for mechanism assembly with the focus on quality and contamination requirements verification in exploration projects such as ExoMars.

  19. Actin-myosin network is required for proper assembly of influenza virus particles

    Energy Technology Data Exchange (ETDEWEB)

    Kumakura, Michiko; Kawaguchi, Atsushi, E-mail: ats-kawaguchi@md.tsukuba.ac.jp; Nagata, Kyosuke, E-mail: knagata@md.tsukuba.ac.jp

    2015-02-15

    Actin filaments are known to play a central role in cellular dynamics. After polymerization of actin, various actin-crosslinking proteins including non-muscle myosin II facilitate the formation of spatially organized actin filament networks. The actin-myosin network is highly expanded beneath plasma membrane. The genome of influenza virus (vRNA) replicates in the cell nucleus. Then, newly synthesized vRNAs are nuclear-exported to the cytoplasm as ribonucleoprotein complexes (vRNPs), followed by transport to the beneath plasma membrane where virus particles assemble. Here, we found that, by inhibiting actin-myosin network formation, the virus titer tends to be reduced and HA viral spike protein is aggregated on the plasma membrane. These results indicate that the actin-myosin network plays an important role in the virus formation. - Highlights: • Actin-myosin network is important for the influenza virus production. • HA forms aggregations at the plasma membrane in the presence of blebbistatin. • M1 is recruited to the budding site through the actin-myosin network.

  20. Actin-myosin network is required for proper assembly of influenza virus particles

    International Nuclear Information System (INIS)

    Kumakura, Michiko; Kawaguchi, Atsushi; Nagata, Kyosuke

    2015-01-01

    Actin filaments are known to play a central role in cellular dynamics. After polymerization of actin, various actin-crosslinking proteins including non-muscle myosin II facilitate the formation of spatially organized actin filament networks. The actin-myosin network is highly expanded beneath plasma membrane. The genome of influenza virus (vRNA) replicates in the cell nucleus. Then, newly synthesized vRNAs are nuclear-exported to the cytoplasm as ribonucleoprotein complexes (vRNPs), followed by transport to the beneath plasma membrane where virus particles assemble. Here, we found that, by inhibiting actin-myosin network formation, the virus titer tends to be reduced and HA viral spike protein is aggregated on the plasma membrane. These results indicate that the actin-myosin network plays an important role in the virus formation. - Highlights: • Actin-myosin network is important for the influenza virus production. • HA forms aggregations at the plasma membrane in the presence of blebbistatin. • M1 is recruited to the budding site through the actin-myosin network

  1. Clathrin heavy chain 1 is required for spindle assembly and chromosome congression in mouse oocytes.

    Science.gov (United States)

    Zhao, Jie; Wang, Lu; Zhou, Hong-Xia; Liu, Li; Lu, Angeleem; Li, Guang-Peng; Schatten, Heide; Liang, Cheng-Guang

    2013-10-01

    Clathrin heavy chain 1 (CLTC) has been considered a “moonlighting protein” which acts in membrane trafficking during interphase and in stabilizing spindle fibers during mitosis. However, its roles in meiosis, especially in mammalian oocyte maturation, remain unclear. This study investigated CLTC expression and function in spindle formation and chromosome congression during mouse oocyte meiotic maturation. Our results showed that the expression level of CLTC increased after germinal vesicle breakdown (GVBD) and peaked in the M phase. Immunostaining results showed CLTC distribution throughout the cytoplasm in a cell cycle-dependent manner. Appearance and disappearance of CLTC along with β-tubulin (TUBB) could be observed during spindle dynamic changes. To explore the relationship between CLTC and microtubule dynamics, oocytes at metaphase were treated with taxol or nocodazole. CLTC colocalized with TUBB at the enlarged spindle and with cytoplasmic asters after taxol treatment; it disassembled and distributed into the cytoplasm along with TUBB after nocodazole treatment. Disruption of CLTC function using stealth siRNA caused a decreased first polar body extrusion rate and extensive spindle formation and chromosome congression defects. Taken together, these results show that CLTC plays an important role in spindle assembly and chromosome congression through a microtubule correlation mechanism during mouse oocyte maturation.

  2. Contribution to the discussion on the criminalization of stalking

    Directory of Open Access Journals (Sweden)

    Miladinović-Stefanović Dušica

    2016-01-01

    Full Text Available The serious and complex nature of stalking, as a social phenomenon, is reflected in diverse forms of this illicit act, the severity of consequences caused by its commission, and the likelihood of being turned into violence. Whereas it may be observed from different perspectives, in this paper stalking is examined from the aspect of substantive criminal law. In the first part of this article, the author provides an overview of legal provisions on the crime of stalking as envisaged in selected European legislations. In the second part of the paper, the author re-examines the capacity of the existing Serbian criminal legislation to respond to this problem, especially through the envisaged criminal offence of endangering safety of another. In conclusion, the author discusses the inadequacy of the existing legislation and the need for further legislative intervention in this area.

  3. Body Stalk Anomaly in a 9-Week Pregnancy

    Directory of Open Access Journals (Sweden)

    Fabio E. Quijano

    2014-01-01

    Full Text Available Body stalk anomaly is a rare and severe malformation syndrome in which the exact pathophysiology and trigger factors are still unknown. This is a case of a 30-year-old patient who underwent ultrasound at 9 weeks of gestation. It revealed an abnormal location of the inferior body of the embryo in the coelomic space. The findings suggested a short umbilical cord syndrome. In order to confirm the diagnosis, the patient was scheduled for a second ultrasonography at 11 weeks of gestation. The obtained images, confirmed the location of the inferior body in the coelomic space with no visible bladder, absence of the right leg, severe abdominal wall defect, consistent with an omphalocele, and a short 5 mm umbilical cord. These last ultrasonographic findings were consistent with body stalk anomaly. Because of severe malformation incompatible with life, the patient was offered termination of pregnancy. Pathologic examination confirmed the suspected pathology of body stalk anomaly.

  4. A mobile robot with parallel kinematics constructed under requirements for assembling and machining of the ITER vacuum vessel

    International Nuclear Information System (INIS)

    Pessi, P.; Huapeng Wu; Handroos, H.; Jones, L.

    2006-01-01

    ITER sectors require more stringent tolerances ± 5 mm than normally expected for the size of structure involved. The walls of ITER sectors are made of 60 mm thick stainless steel and are joined together by high efficiency structural and leak tight welds. In addition to the initial vacuum vessel assembly, sectors may have to be replaced for repair. Since commercially available machines are too heavy for the required machining operations and the lifting of a possible e-beam gun column system, and conventional robots lack the stiffness and accuracy in such machining condition, a new flexible, lightweight and mobile robotic machine is being considered. For the assembly of the ITER vacuum vessel sector, precise positioning of welding end-effectors, at some distance in a confined space from the available supports, will be required, which is not possible using conventional machines or robots. This paper presents a special robot, able to carry out welding and machining processes from inside the ITER vacuum vessel, consisting of a ten-degree-of-freedom parallel robot mounted on a carriage driven by electric motor/gearbox on a track. The robot consists of a Stewart platform based parallel mechanism. Water hydraulic cylinders are used as actuators to reach six degrees of freedom for parallel construction. Two linear and two rotational motions are used for enlargement the workspace of the manipulator. The robot carries both welding gun such as a TIG, hybrid laser or e-beam welding gun to weld the inner and outer walls of the ITER vacuum vessel sectors and machining tools to cut and milling the walls with necessary accuracy, it can also carry other tools and material to a required position inside the vacuum vessel . For assembling an on line six degrees of freedom seam finding algorithm has been developed, which enables the robot to find welding seam automatically in a very complex environment. In the machining multi flexible machining processes carried out automatically by

  5. Pituitary stalk compression by the dorsum sellae: possible cause for late childhood onset growth disorders.

    Science.gov (United States)

    Taoka, Toshiaki; Iwasaki, Satoru; Okamoto, Shingo; Sakamoto, Masahiko; Nakagawa, Hiroyuki; Otake, Shoichiro; Fujioka, Masayuki; Hirohashi, Shinji; Kichikawa, Kimihiko

    2006-06-01

    The purpose of this study was to evaluate the relationship between pituitary stalk compression by the dorsum sellae and clinical or laboratory findings in short stature children. We retrospectively reviewed magnetic resonance images of the pituitary gland and pituitary stalk for 34 short stature children with growth hormone (GH) deficiency and 24 age-matched control cases. We evaluated the degree of pituitary stalk compression caused by the dorsum sellae. Body height, GH level, pituitary height and onset age of the short stature were statistically compared between cases of pituitary stalk compression with associated stalk deformity and cases without compression. Compression of the pituitary stalk with associated stalk deformity was seen in nine cases within the short stature group. There were no cases observed in the control group. There were no significant differences found for body height, GH level and pituitary height between the cases of pituitary stalk compression with associated stalk deformity and cases without compression. However, a significant difference was seen in the onset age between cases with and without stalk compression. Pituitary stalk compression with stalk deformity caused by the dorsum sellae was significantly correlated with late childhood onset of short stature.

  6. Importin α1 is required for nuclear import of herpes simplex virus proteins and capsid assembly in fibroblasts and neurons

    Science.gov (United States)

    Anderson, Fenja; Rother, Franziska; Rudolph, Kathrin; Prank, Ute; Binz, Anne; Hügel, Stefanie; Hartmann, Enno; Bader, Michael; Bauerfeind, Rudolf; Sodeik, Beate

    2018-01-01

    Herpesviruses are large DNA viruses which depend on many nuclear functions, and therefore on host transport factors to ensure specific nuclear import of viral and host components. While some import cargoes bind directly to certain transport factors, most recruit importin β1 via importin α. We identified importin α1 in a small targeted siRNA screen to be important for herpes simplex virus (HSV-1) gene expression. Production of infectious virions was delayed in the absence of importin α1, but not in cells lacking importin α3 or importin α4. While nuclear targeting of the incoming capsids, of the HSV-1 transcription activator VP16, and of the viral genomes were not affected, the nuclear import of the HSV-1 proteins ICP4 and ICP0, required for efficient viral transcription, and of ICP8 and pUL42, necessary for DNA replication, were reduced. Furthermore, quantitative electron microscopy showed that fibroblasts lacking importin α1 contained overall fewer nuclear capsids, but an increased proportion of mature nuclear capsids indicating that capsid formation and capsid egress into the cytoplasm were impaired. In neurons, importin α1 was also not required for nuclear targeting of incoming capsids, but for nuclear import of ICP4 and for the formation of nuclear capsid assembly compartments. Our data suggest that importin α1 is specifically required for the nuclear localization of several important HSV1 proteins, capsid assembly, and capsid egress into the cytoplasm, and may become rate limiting in situ upon infection at low multiplicity or in terminally differentiated cells such as neurons. PMID:29304174

  7. A prefoldin-associated WD-repeat protein (WDR92) is required for the correct architectural assembly of motile cilia

    Science.gov (United States)

    Patel-King, Ramila S.; King, Stephen M.

    2016-01-01

    WDR92 is a highly conserved WD-repeat protein that has been proposed to be involved in apoptosis and also to be part of a prefoldin-like cochaperone complex. We found that WDR92 has a phylogenetic signature that is generally compatible with it playing a role in the assembly or function of specifically motile cilia. To test this hypothesis, we performed an RNAi-based knockdown of WDR92 gene expression in the planarian Schmidtea mediterranea and were able to achieve a robust reduction in mRNA expression to levels undetectable under our standard RT-PCR conditions. We found that this treatment resulted in a dramatic reduction in the rate of organismal movement that was caused by a switch in the mode of locomotion from smooth, cilia-driven gliding to muscle-based, peristaltic contractions. Although the knockdown animals still assembled cilia of normal length and in similar numbers to controls, these structures had reduced beat frequency and did not maintain hydrodynamic coupling. By transmission electron microscopy we observed that many cilia had pleiomorphic defects in their architecture, including partial loss of dynein arms, incomplete closure of the B-tubule, and occlusion or replacement of the central pair complex by accumulated electron-dense material. These observations suggest that WDR92 is part of a previously unrecognized cytoplasmic chaperone system that is specifically required to fold key components necessary to build motile ciliary axonemes. PMID:26912790

  8. Perceptual advertisement by the prey of stalking or ambushing predators.

    Science.gov (United States)

    Broom, Mark; Ruxton, Graeme D

    2012-12-21

    There has been previous theoretical explorations of the stability of signals by prey that they have detected a stalking or ambush predator, where such perceptual advertisement dissuades the predator from attacking. Here we use a game theoretical model to extend the theory to consider some empirically-motivated complexities: (i) many perceptual advertisement signals appear to have the potential to vary in intensity, (ii) higher intensity signals are likely to be most costly to produce, and (iii) some high-cost signals (such as staring directly at the predator) can only be utilised if the prey is very confident of the existence of a nearby predator (that is, there are reserved or unfakable signals). We demonstrate that these complexities still allow for stable signalling. However, we do not find solutions where prey use a range of signal intensities to signal different degrees of confidence in the proximity of a predator; with prey simply adopting a binary response of not signalling or always signalling at the same fixed level. However this fixed level will not always be the cheapest possible signal, and we predict that prey that require more certainty about proximity of a predator will use higher-cost signals. The availability of reserved signals does not prohibit the stability of signalling based on lower-cost signals, but we also find circumstances where only the reserved signal is used. We discuss the potential to empirically test our model predictions, and to develop theory further to allow perceptual advertisement to be combined with other signalling functions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Shift of the pituitary stalk in intrasellar pituitary adenomas

    International Nuclear Information System (INIS)

    Ito, Jusuke; Tokiguchi, Susumu; Nakamori, Akitoshi; Watanabe, Akira; Yokoyama, Motoharu.

    1982-01-01

    Fifty-one patients from a group of 344 patients undergoing the evaluation of intrasellar or parasellar tumors were diagnosed on CT as having an intrasellar pituitary adenoma. Axial transverse sections were performed at -10 0 to Reid's basal line, using 1.5-mm-thick slices and sagittal and coronal reformation. Of these 51 patients, 17 showed a shift of the pituitary stalk. The area where a tumor was thought to be located within the sella turcica on preoperative CT became defective on CT after transsphenoidal surgery in all cases. Histological verification was obtained in all cases. Also, the shift of the pituitary stalk was normalized or markedly improved after surgery in all cases. In functioning tumors, all cases except two showed an endocrinologically normal state or a marked improvement after transsphenoidal surgery. On the basis of the above-mentioned facts, it was concluded that the shift of the pituitary stalk in intrasellar pituitary adenomas indicated the evidence of a mass and its location in the sella turcica. However, a shift of the pituitary stalk was also observed under other conditions, such as empty sella and tuberculum sellae meningioma, and so it is not a pathognomonic finding in intrasellar pituitary adenomas. (author)

  10. The Reliability and Predictive Validity of the Stalking Risk Profile.

    Science.gov (United States)

    McEwan, Troy E; Shea, Daniel E; Daffern, Michael; MacKenzie, Rachel D; Ogloff, James R P; Mullen, Paul E

    2018-03-01

    This study assessed the reliability and validity of the Stalking Risk Profile (SRP), a structured measure for assessing stalking risks. The SRP was administered at the point of assessment or retrospectively from file review for 241 adult stalkers (91% male) referred to a community-based forensic mental health service. Interrater reliability was high for stalker type, and moderate-to-substantial for risk judgments and domain scores. Evidence for predictive validity and discrimination between stalking recidivists and nonrecidivists for risk judgments depended on follow-up duration. Discrimination was moderate (area under the curve = 0.66-0.68) and positive and negative predictive values good over the full follow-up period ( Mdn = 170.43 weeks). At 6 months, discrimination was better than chance only for judgments related to stalking of new victims (area under the curve = 0.75); however, high-risk stalkers still reoffended against their original victim(s) 2 to 4 times as often as low-risk stalkers. Implications for the clinical utility and refinement of the SRP are discussed.

  11. Enhanced ethanol production from stalk juice of sweet sorghum by ...

    African Journals Online (AJOL)

    Sweet sorghum (sugar sorghum, Sorghum bicolor) is one kind of non-grain energy crops. As a novel green regenerated high-energy crop with high utility value, high yield of biomass, the sweet sorghum is widely used and developed in China. Stalk juice of sweet sorghum was used as the main substrate for ethanol ...

  12. Deactivation of tannins in raisin stalk by polyethylene glycol-600 ...

    African Journals Online (AJOL)

    6000) and urea on dry and organic matter digestibility (IVDMD and IVOMD, respectively) and gas production in vitro. Raisin stalk contained 8.6% crude protein, 85% dry matter, 7% ash, 13.95% total extractable phenol (TEPH) and 2.13% total ...

  13. Comparative Study of Root, Stalk and Leaf Essential Oils of ...

    African Journals Online (AJOL)

    MBI

    2017-03-03

    Mar 3, 2017 ... ABSTRACT. The root, stalk and leaf essential oils of Cymbopogon citratus grown in Kaduna, North Central Nigeria were extracted separately by hydrodistillation and characterized by GC-MS. The chemical composition analysis by. GC-MS of the oils allowed the identification of 34, 26 and 16 compounds ...

  14. Stalking on Campus: Ensuring Security with Rights and Liberties

    Science.gov (United States)

    Campbell, Julie; Longo, Peter J.

    2010-01-01

    College campuses are often perceived as idyllic communities. While there is much truth in such perceptions, not surprisingly there are many complicated issues on college campuses. Stalking is one such problem that seems to persist and thrive in the cloistered college setting. Campus safety efforts must temper security practices with civil rights…

  15. 77 FR 211 - National Stalking Awareness Month, 2012

    Science.gov (United States)

    2012-01-03

    ..., tragically, stalking can be a precursor to more violent offenses, including sexual assault and homicide. The... Federal agencies, we are promoting new tools to decrease the incidence of domestic violence, sexual... and harmful behavior. This month, let us come together to prevent abuse, violence, and harassment in...

  16. Two unusual causes of pituitary stalk thickening in children without clinical features of diabetes insipidus

    International Nuclear Information System (INIS)

    Andronikou, Savvas; Furlan, Gisella; Fieggen, Anthony G.; Wilmshurst, Jo

    2003-01-01

    Pituitary stalk thickening has a wide differential diagnosis, but almost all infundibular diseases present with diabetes insipidus (DI). We present a child with metastatic involvement of the pituitary stalk from a primary pontine tumour and a child with tuberculous infiltration of the pituitary stalk and associated meningeal inflammation. Neither child presented with DI. Even though both metastatic disease and tuberculous infiltration of the stalk have been reported in adults, these are the first reports with accompanying cross-sectional images of pituitary stalk involvement by these diseases in children. (orig.)

  17. Two unusual causes of pituitary stalk thickening in children without clinical features of diabetes insipidus

    Energy Technology Data Exchange (ETDEWEB)

    Andronikou, Savvas; Furlan, Gisella; Fieggen, Anthony G.; Wilmshurst, Jo [Department of Paediatric Neuroradiology, University of Cape Town, Klipfontein Road, 7700, Rondebosch, Cape Town (South Africa); Cross War Memorial Children' s Hospital, University of Cape Town, Klipfontein Road, 7700, Rondebosch, Cape Town (South Africa); School of Child and Adolescent Health, University of Cape Town, Klipfontein Road, 7700, Rondebosch, Cape Town (South Africa)

    2003-07-01

    Pituitary stalk thickening has a wide differential diagnosis, but almost all infundibular diseases present with diabetes insipidus (DI). We present a child with metastatic involvement of the pituitary stalk from a primary pontine tumour and a child with tuberculous infiltration of the pituitary stalk and associated meningeal inflammation. Neither child presented with DI. Even though both metastatic disease and tuberculous infiltration of the stalk have been reported in adults, these are the first reports with accompanying cross-sectional images of pituitary stalk involvement by these diseases in children. (orig.)

  18. Mediators and Moderators of the Association Between Stalking Victimization and Psychological Distress.

    Science.gov (United States)

    Fais, Connor R; Lutz-Zois, Catherine J; Goodnight, Jackson A

    2017-03-01

    The current study aims to understand mediators and moderators of the relationship between stalking victimization and depression. Based on the reformulated learned helplessness theory, which emphasizes the role of internal, global, and stable attributions for negative events in the development of depression, we predicted that the association between stalking victimization and depression would be mediated by attributions for the stalking and characterological self-blame. We predicted that the association between stalking victimization and helplessness attributions or characterological self-blame, in turn, would be moderated by gender, sex-role identity, and length of stalking. Specifically, we hypothesized that female victims, victims possessing a feminine sex-role identity, and victims experiencing longer stalking episodes would be more likely to experience depression in comparison with male victims, victims possessing a masculine sex-role identity, and victims experiencing shorter stalking episodes. The results indicated that global attributions for the cause of stalking significantly mediated the relationship between stalking victimization and depression. The results for stable attributions, internal attributions, and characterological self-blame were nonsignificant. Furthermore, gender, sex-role identity, and length of stalking did not moderate the association between stalking and attributional style or characterological self-blame. The implications of these findings and directions for future research are discussed.

  19. Stalking by patients: doctors' experiences in a Canadian urban area (Part II)--physician responses.

    Science.gov (United States)

    Abrams, Karen M; Robinson, Gail Erlick

    2013-07-01

    Stalking involves recurrent unwanted communication, harassment, and intrusive behaviors. The aim of this study was to examine physicians' experiences of being stalked by their patients, with particular attention to the emotional impact on the physicians and their actions taken. A questionnaire designed to study the nature and the impact of stalking experiences among physicians was sent to 3159 randomly chosen physicians in the Greater Toronto Area. Approximately 15% (14.9%) of the 1190 physicians who responded reported having been stalked. The physicians reported feeling angry, frustrated, anxious, frightened, lacking control, and helpless. The physicians coped in a number of ways including terminating the physician-patient relationship, but many just ignored the problem. Most had no previous knowledge about stalking. Physicians experience a range of emotions as a result of being a victim of stalking. In view of the prevalence and the impact, physicians may benefit from education to help prepare them for the possibility of being stalked.

  20. Digenic Inheritance of PROKR2 and WDR11 Mutations in Pituitary Stalk Interruption Syndrome.

    Science.gov (United States)

    McCormack, Shana E; Li, Dong; Kim, Yeon Joo; Lee, Ji Young; Kim, Soo-Hyun; Rapaport, Robert; Levine, Michael A

    2017-07-01

    Pituitary stalk interruption syndrome (PSIS, ORPHA95496) is a congenital defect of the pituitary gland characterized by the triad of a very thin/interrupted pituitary stalk, an ectopic (or absent) posterior pituitary gland, and hypoplasia or aplasia of the anterior pituitary gland. Complex genetic patterns of inheritance of this disorder are increasingly recognized. The objective of this study was to identify a genetic cause of PSIS in an affected child. Whole exome sequencing (WES) was performed by using standard techniques, with prioritized genetic variants confirmed via Sanger sequencing. To investigate the effects of one candidate variant on mutant WDR11 function, Western blotting and coimmunofluorescence were used to assess binding capacity, and leptomycin B exposure along with immunofluorescence was used to assess nuclear localization. We describe a child who presented in infancy with combined pituitary hormone deficiencies and whose brain imaging demonstrated a small anterior pituitary, ectopic posterior pituitary, and a thin, interrupted stalk. WES demonstrated heterozygous missense mutations in two genes required for pituitary development, a known loss-of-function mutation in PROKR2 (c.253C>T;p.R85C) inherited from an unaffected mother, and a WDR11 (c.1306A>G;p.I436V) mutation inherited from an unaffected father. Mutant WDR11 loses its capacity to bind to its functional partner, EMX1, and to localize to the nucleus. WES in a child with PSIS and his unaffected family implicates a digenic mechanism of inheritance. In cases of hypopituitarism in which there is incomplete segregation of a monogenic genotype with the phenotype, the possibility that a second genetic locus is involved should be considered. Copyright © 2017 Endocrine Society

  1. Zwint-1 is required for spindle assembly checkpoint function and kinetochore-microtubule attachment during oocyte meiosis.

    Science.gov (United States)

    Woo Seo, Dong; Yeop You, Seung; Chung, Woo-Jae; Cho, Dong-Hyung; Kim, Jae-Sung; Su Oh, Jeong

    2015-10-21

    The key step for faithful chromosome segregation during meiosis is kinetochore assembly. Defects in this process result in aneuploidy, leading to miscarriages, infertility and various birth defects. However, the roles of kinetochores in homologous chromosome segregation during meiosis are ill-defined. Here we found that Zwint-1 is required for homologous chromosome segregation during meiosis. Knockdown of Zwint-1 accelerated the first meiosis by abrogating the kinetochore recruitment of Mad2, leading to chromosome misalignment and a high incidence of aneuploidy. Although Zwint-1 knockdown did not affect Aurora C kinase activity, the meiotic defects following Zwint-1 knockdown were similar to those observed with ZM447439 treatment. Importantly, the chromosome misalignment following Aurora C kinase inhibition was not restored after removing the inhibitor in Zwint-1-knockdown oocytes, whereas the defect was rescued after the inhibitor washout in the control oocytes. These results suggest that Aurora C kinase-mediated correction of erroneous kinetochore-microtubule attachment is primarily regulated by Zwint-1. Our results provide the first evidence that Zwint-1 is required to correct erroneous kinetochore-microtubule attachment and regulate spindle checkpoint function during meiosis.

  2. Post-harvest treatments in smooth-stalked meadow grass (Poa pratensis L.) - effect on carbohydrates and tiller development

    DEFF Research Database (Denmark)

    Boelt, Birte

    2007-01-01

    Temperate grass species require a period of short days/low temperature to respond to flower induction stimuli. The same environmental conditions stimulate the increase in carbohydrate concentration in aboveground biomass and the accumulation of reserve carbohydrates in the basal plant parts....... The present investigation was initiated to investigate the effect of post-harvest treatments on dry matter production in autumn, carbohydrate content, the number of reproductive tillers and seed yield in a turf-type cultivar ‘Conni' of smooth-stalked meadow grass. The results show that post-harvest treatments...... harvest and all residues removed. The results from plant samples in autumn indicate that decreasing aboveground biomass production leads to a higher carbohydrate concentration which may stimulate the reproductive development in smooth-stalked meadow grass....

  3. The Cell Cycle Timing of Centromeric Chromatin Assembly in Drosophila Meiosis Is Distinct from Mitosis Yet Requires CAL1 and CENP-C

    Science.gov (United States)

    Gorgescu, Walter; Tang, Jonathan; Costes, Sylvain V.; Karpen, Gary H.

    2012-01-01

    CENP-A (CID in flies) is the histone H3 variant essential for centromere specification, kinetochore formation, and chromosome segregation during cell division. Recent studies have elucidated major cell cycle mechanisms and factors critical for CENP-A incorporation in mitosis, predominantly in cultured cells. However, we do not understand the roles, regulation, and cell cycle timing of CENP-A assembly in somatic tissues in multicellular organisms and in meiosis, the specialized cell division cycle that gives rise to haploid gametes. Here we investigate the timing and requirements for CID assembly in mitotic tissues and male and female meiosis in Drosophila melanogaster, using fixed and live imaging combined with genetic approaches. We find that CID assembly initiates at late telophase and continues during G1 phase in somatic tissues in the organism, later than the metaphase assembly observed in cultured cells. Furthermore, CID assembly occurs at two distinct cell cycle phases during male meiosis: prophase of meiosis I and after exit from meiosis II, in spermatids. CID assembly in prophase I is also conserved in female meiosis. Interestingly, we observe a novel decrease in CID levels after the end of meiosis I and before meiosis II, which correlates temporally with changes in kinetochore organization and orientation. We also demonstrate that CID is retained on mature sperm despite the gross chromatin remodeling that occurs during protamine exchange. Finally, we show that the centromere proteins CAL1 and CENP-C are both required for CID assembly in meiosis and normal progression through spermatogenesis. We conclude that the cell cycle timing of CID assembly in meiosis is different from mitosis and that the efficient propagation of CID through meiotic divisions and on sperm is likely to be important for centromere specification in the developing zygote. PMID:23300382

  4. Clinical and radiological features of pituitary stalk lesions in children and adolescents

    Directory of Open Access Journals (Sweden)

    Sung Chul Yoon

    2014-12-01

    Full Text Available PurposeThe diagnosis of pituitary stalk lesion has been based on clinical feature, radiologic assessment for its critical location and role. This study aimed to investigate clinical symptoms, endocrine disturbance, magnetic resonance imaging (MRI findings of pituitary stalk lesions in children and adolescents and to evaluate differences between neoplastic lesions with the others.MethodsWe performed a retrospective review of patients under 18 years old with pituitary stalk lesions diagnosed at the Seoul National University Children's Hospital between 2000 and 2013, by a text search for head MRI reports by using 'pituitary stalk', 'infundibulum', and 'infundibular stalk', as keywords.ResultsFor the 76 patients, sixteen patients (21.1% had congenital lesions, and 52 (68.4% had neoplasms. No inflammatory lesions were found. Diabetes insipidus (DI was the most common endocrine defect, diagnosed in 38 patients (50%. There was male predominance especially in neoplastic group. Thickened pituitary stalk was, but enhancement of lesion was not, associated with neoplasm. DI was more prevalent in neoplastic stalk lesions. Anterior pituitary dysfunction such as growth hormone and adrenocorticotropic hormone deficiencies were less prevalent in neoplastic lesions of pituitary stalk.ConclusionIn conclusion, the etiology of pituitary stalk lesions in children and adolescents is diverse and different from that in adults. Neoplastic pituitary stalk lesions can be differentiated from nonneoplastic lesions by systemic evaluation of clinical, hormonal, radiological findings.

  5. Phenolic Compounds Analysis of Root, Stalk, and Leaves of Nettle

    Directory of Open Access Journals (Sweden)

    Semih Otles

    2012-01-01

    Full Text Available Types of nettles (Urtica dioica were collected from different regions to analyze phenolic compounds in this research. Nettles are specially grown in the coastal part. According to this kind of properties, nettle samples were collected from coastal part of (Mediterranean, Aegean, Black sea, and Marmara Turkey. Phenolic profile, total phenol compounds, and antioxidant activities of nettle samples were analyzed. Nettles were separated to the part of root, stalk, and leaves. Then, these parts of nettle were analyzed to understand the difference of phenolic compounds and amount of them. Nettle (root, stalk and leaves samples were analyzed by using High-Performance Liquid Chromatography with Diode-Array Detection (HPLC-DAD to qualitative and quantitative determination of the phenolic compounds. Total phenolic components were measured by using Folin-Ciocalteu method. The antioxidant activity was measured by using DPPH (2,2-diphenyl-1-picrylhydrazyl which is generally used for herbal samples and based on single electron transfer (SET.

  6. Phenolic compounds analysis of root, stalk, and leaves of nettle.

    Science.gov (United States)

    Otles, Semih; Yalcin, Buket

    2012-01-01

    Types of nettles (Urtica dioica) were collected from different regions to analyze phenolic compounds in this research. Nettles are specially grown in the coastal part. According to this kind of properties, nettle samples were collected from coastal part of (Mediterranean, Aegean, Black sea, and Marmara) Turkey. Phenolic profile, total phenol compounds, and antioxidant activities of nettle samples were analyzed. Nettles were separated to the part of root, stalk, and leaves. Then, these parts of nettle were analyzed to understand the difference of phenolic compounds and amount of them. Nettle (root, stalk and leaves) samples were analyzed by using High-Performance Liquid Chromatography with Diode-Array Detection (HPLC-DAD) to qualitative and quantitative determination of the phenolic compounds. Total phenolic components were measured by using Folin-Ciocalteu method. The antioxidant activity was measured by using DPPH (2,2-diphenyl-1-picrylhydrazyl) which is generally used for herbal samples and based on single electron transfer (SET).

  7. Phenolic Compounds Analysis of Root, Stalk, and Leaves of Nettle

    Science.gov (United States)

    Otles, Semih; Yalcin, Buket

    2012-01-01

    Types of nettles (Urtica dioica) were collected from different regions to analyze phenolic compounds in this research. Nettles are specially grown in the coastal part. According to this kind of properties, nettle samples were collected from coastal part of (Mediterranean, Aegean, Black sea, and Marmara) Turkey. Phenolic profile, total phenol compounds, and antioxidant activities of nettle samples were analyzed. Nettles were separated to the part of root, stalk, and leaves. Then, these parts of nettle were analyzed to understand the difference of phenolic compounds and amount of them. Nettle (root, stalk and leaves) samples were analyzed by using High-Performance Liquid Chromatography with Diode-Array Detection (HPLC-DAD) to qualitative and quantitative determination of the phenolic compounds. Total phenolic components were measured by using Folin-Ciocalteu method. The antioxidant activity was measured by using DPPH (2,2-diphenyl-1-picrylhydrazyl) which is generally used for herbal samples and based on single electron transfer (SET). PMID:22593694

  8. [Effects of hot-NaOH pretreatment on Jerusalem artichoke stalk composition and subsequent enzymatic hydrolysis].

    Science.gov (United States)

    Wang, Qing; Qiu, Jingwen; Li, Yang; Shen, Fei

    2015-10-01

    In order to explore the possibility of Jerusalem artichoke stalk for bioenergy conversion, we analyzed the main composition of whole stalk, pitch, and core of the stalk. Meanwhile, these parts were pretreated with different NaOH concentrations at 121 degrees C. Afterwards, enzymatic hydrolysis was performed to evaluate the pretreatment efficiency. Jerusalem artichoke stalk was characterized by relatively high lignin content (32.0%) compared with traditional crop stalks. The total carbohydrate content was close to that of crop stalks, but with higher cellulose content (40.5%) and lower hemicellulose (19.6%) than those of traditional crop stalks. After pretreatment, the lignin content in the whole stalk, pitch, and core decreased by 13.1%-13.4%, 8.3%-13.5%, and 19.9%-27.2%, respectively, compared with the unpretreated substrates. The hemicellulose content in the whole stalk, pitch, and core decreased 87.8%-96.9%, 87.6%-95.0%, and 74.0%-90.2%, respectively. Correspondingly, the cellulose content in the pretreated whole stalk, pitch, and core increased by 56.5%-60.2%, 52.2%-55.4%, and 62.7%-73.2%, respectively. Moreover, increase of NaOH concentration for pretreatment could improve the enzymatic hydrolysis of the whole stalk and pitch by 2.3-2.6 folds and 10.3-18.5 folds, respectively. The hydrolysis of pretreated stalk core decreased significantly as 2.0 mol/L NaOH was employed, although the increased NaOH concentration can also improve its hydrolysis performance. Based on these results, hot-NaOH can be regarded as an option for Jerusalem artichoke stalk pretreatment. Increasing NaOH concentration was beneficial to hemicellulose and lignin removal, and consequently improved sugar conversion. However, the potential decrease of sugar conversion of the pretreated core by higher NaOH concentration suggested further optimization on the pretreatment conditions should be performed.

  9. Phenolic Compounds Analysis of Root, Stalk, and Leaves of Nettle

    OpenAIRE

    Otles, Semih; Yalcin, Buket

    2012-01-01

    Types of nettles (Urtica dioica) were collected from different regions to analyze phenolic compounds in this research. Nettles are specially grown in the coastal part. According to this kind of properties, nettle samples were collected from coastal part of (Mediterranean, Aegean, Black sea, and Marmara) Turkey. Phenolic profile, total phenol compounds, and antioxidant activities of nettle samples were analyzed. Nettles were separated to the part of root, stalk, and leaves. Then, these parts ...

  10. Pituitary gland and its stalk observed by high resolution CT

    International Nuclear Information System (INIS)

    Nakagawa, Yoshinobu; Fukami, Tsuneharu; Matsumoto, Keizo.

    1982-01-01

    It seemed to be important to recognize the CT findings of normal pituitary gland and the stalk for the acurate morphological diagnosis of pituitary microadenoma. In a consecutive series of normal 103 cases, the CT scans obtained by high resolution CT (CE-CT, Metrizamide CT) were analized and compared with 6 cases of microadenoma. The pituitary stalk demonstrated by the reconstructed coronal CT was examined and the inclination of the stalk was measured. The mean value of the inclination of pituitary stalk was 1.4 +- 1.7 0 in normal group and 9.3 +- 2.4 0 in microadenoma group. The form of the pituitary gland demonstrated by a reconstructed mid-saggital CT were classified into the following 3 types. Type I : The gland filling the whole pituitary fossa. Type II : The gland filled with small CSF space localized in the upper-anterior part in the pituitary fossa. Type III : The enlarged CSF space of more than half of the depth of pituitary fossa and the gland localized in the retro-lower part. As for the shape of pituitary gland, type I was revealed in 26 cases (7 cases in male and 19 cases in female), Type II was revealed in 31 cases (12 cases in male and 19 cases in female), Type III was revealed in 46 cases (25 cases in male and 21 cases in female). Type I was shown in female, especially in 10 years old young female. In 19 cases of 30 years to 40 years female, Type II was shown in 9 cases. In 44 male cases, Type I and Type II were shown in all ages. In the aged, Type III was shown in more than the other types. On the other hand, Type I was noted in 5 out of 6 cases of microadenoma group. (author)

  11. CHARACTERISTICS OF CORN STALK HEMICELLULOSE PYROLYSIS IN A TUBULAR REACTOR

    OpenAIRE

    Gao-Jin Lv; Shu-Bin Wu; Rui Lou

    2010-01-01

    Pyrolysis characteristics of corn stalk hemicellulose were investigated in a tubular reactor at different temperatures, with focus mainly on the releasing profiles and forming behaviors of pyrolysis products (gas, char, and tar). The products obtained were further identified using various approaches (including GC, SEM, and GC-MS) to understand the influence of temperature on product properties and compositions. It was found that the devolatilization of hemicellulose mainly occurred at low tem...

  12. hPOC5 is a centrin-binding protein required for assembly of full-length centrioles.

    Science.gov (United States)

    Azimzadeh, Juliette; Hergert, Polla; Delouvée, Annie; Euteneuer, Ursula; Formstecher, Etienne; Khodjakov, Alexey; Bornens, Michel

    2009-04-06

    Centrin has been shown to be involved in centrosome biogenesis in a variety of eukaryotes. In this study, we characterize hPOC5, a conserved centrin-binding protein that contains Sfi1p-like repeats. hPOC5 is localized, like centrin, in the distal portion of human centrioles. hPOC5 recruitment to procentrioles occurs during G2/M, a process that continues up to the full maturation of the centriole during the next cell cycle and is correlated with hyperphosphorylation of the protein. In the absence of hPOC5, RPE1 cells arrest in G1 phase, whereas HeLa cells show an extended S phase followed by cell death. We show that hPOC5 is not required for the initiation of procentriole assembly but is essential for building the distal half of centrioles. Interestingly, the hPOC5 family reveals an evolutionary divergence between vertebrates and organisms like Drosophila melanogaster or Caenorhabditis elegans, in which the loss of hPOC5 may correlate with the conspicuous differences in centriolar structure.

  13. Enhancement of Cotton Stalks Composting with Certain Microbial Inoculations

    Directory of Open Access Journals (Sweden)

    Osama Abdel-Twab Seoudi

    2013-01-01

    Full Text Available Effect of inoculation with Phanerochaete chrysosporium and Azotobacter chrococcum microbes on cotton stalks composting was studied in an attempt to achieve rapid maturity and desirable characteristics of produced compost. Composting process was maintained for 16 weeks under aerobic conditions with proper moisture content and turning piles. The C/N ratio of the mixtures was adjusted to about 30:1 before composting using chicken manure. Temperature evolution and its profile were monitored throughout the composting period. Mineralization rates of organic matter and changes in nitrogen content during composting stages were evaluated. Total plate count of mesophilic and thermophilic bacteria, cellulose decomposers and Azotobacter were determined during composting periods. The treatment of cotton stalks inoculated with both P. chrysosporium and Azotobacter gave the most desirable characteristics of the final product with respect to the narrow C/N ratio, high nitrogen content and high numbers of Azotobacter. The phytotoxicity test of compost extracts was evaluated. The use of P. chrysosporium in composting accelerated markedly decomposition process, so that 16 weeks composting enough to produce a stable and mature compost suitable for use as fertilizer while the fertilizer obtained by composting cotton stalks mixed with chicken manure and inoculated with microorganisms is highest quality Compost.

  14. Psychological Impact of Stalking on Male and Female Health Care Professional Victims of Stalking and Domestic Violence

    Directory of Open Access Journals (Sweden)

    Daniela Acquadro Maran

    2018-03-01

    Full Text Available The aim of this work was to investigate stalking experiences in a sample of Health Care Professionals, or HCPs, who experienced domestic violence in their previous relationships with an intimate romantic or non-romantic who had become their stalkers. A comparison between males and females was made to highlight the differences among the genders. The findings showed that, for the most part, the victims experienced stalking by a stalker that was not of the same gender. Moreover, the nature of the relationship was romantic, for the most part, for both female and male subjects, suggesting that the principal motivation of stalking is the disruption of an intimate relationship. Regarding domestic violence, females described the phenomenon from a different perspective, indicating verbal, physical, and sexual abuse, while males indicated only verbal abuse. Females tended to amplify, more than the males, depression, and state and trait anxiety. Even if all symptoms were expressed in both females and males, the males exhibited a lack of confidence in their bodies, and the emotional literacy made the expression of distress more difficult. At the same time, the expression of anxiety presented in the women permitted them to become progressively less victimized over time; depression and anxiety allow the recognition of these symptoms as signs of distress and to intervene to reduce them.

  15. Psychological Impact of Stalking on Male and Female Health Care Professional Victims of Stalking and Domestic Violence.

    Science.gov (United States)

    Acquadro Maran, Daniela; Varetto, Antonella

    2018-01-01

    The aim of this work was to investigate stalking experiences in a sample of Health Care Professionals, or HCPs, who experienced domestic violence in their previous relationships with an intimate romantic or non-romantic who had become their stalkers. A comparison between males and females was made to highlight the differences among the genders. The findings showed that, for the most part, the victims experienced stalking by a stalker that was not of the same gender. Moreover, the nature of the relationship was romantic, for the most part, for both female and male subjects, suggesting that the principal motivation of stalking is the disruption of an intimate relationship. Regarding domestic violence, females described the phenomenon from a different perspective, indicating verbal, physical, and sexual abuse, while males indicated only verbal abuse. Females tended to amplify, more than the males, depression, and state and trait anxiety. Even if all symptoms were expressed in both females and males, the males exhibited a lack of confidence in their bodies, and the emotional literacy made the expression of distress more difficult. At the same time, the expression of anxiety presented in the women permitted them to become progressively less victimized over time; depression and anxiety allow the recognition of these symptoms as signs of distress and to intervene to reduce them.

  16. Yield survey and nutritional evaluation of garlic stalk for ruminant feed.

    Science.gov (United States)

    Lee, Y H; Kim, Y I; Oh, Y K; Ahmadi, F; Kwak, W S

    2017-01-01

    Very limited information exists on the ruminal degradation kinetics of nutrients in garlic stalk. The present study aimed to survey the annual yield of garlic stalk in Korea and determine its feed-nutritive value for ruminants. In Experiment 1, garlic stalk was incubated in situ in the rumen of two Hanwoo steers (360 ± 15 kg body weight) and removed after 12, 24, or 48 h to determine the ruminal degradation kinetics of DM and NDF. Rice straw was also included for comparison. In Experiment 2, In Experiment 2, six male Corriedale sheep were randomized to two dietary treatments to determine the apparent digestibility of nutrients in garlic stalk. Diets included a control ration without garlic stalk (60% concentrate mix +40% ryegrass) or a treatment ration (70% control diet +30% garlic stalk). The Korean national yield of garlic stalk (sun-dried basis) in 2016 was estimated to be 31,910 tons, with the southern coastal regions producing the highest quantity. Compared with rice straw, garlic stalk had lower NDF, higher ADF, and greater effective degradabilities of DM and NDF, resulting in a greater TDN value (56.3%), which was higher than that obtained for rice straw (43.7%). These results provide basic information on the ruminal DM and NDF degradation kinetics of garlic stalk, which would be helpful for the efficient utilization of this by-product in ruminant diets.

  17. Yield survey and nutritional evaluation of garlic stalk for ruminant feed

    Directory of Open Access Journals (Sweden)

    Y. H. Lee

    2017-10-01

    Full Text Available Abstract Background Very limited information exists on the ruminal degradation kinetics of nutrients in garlic stalk. The present study aimed to survey the annual yield of garlic stalk in Korea and determine its feed-nutritive value for ruminants. Methods In Experiment 1, garlic stalk was incubated in situ in the rumen of two Hanwoo steers (360 ± 15 kg body weight and removed after 12, 24, or 48 h to determine the ruminal degradation kinetics of DM and NDF. Rice straw was also included for comparison. In Experiment 2, In Experiment 2, six male Corriedale sheep were randomized to two dietary treatments to determine the apparent digestibility of nutrients in garlic stalk. Diets included a control ration without garlic stalk (60% concentrate mix +40% ryegrass or a treatment ration (70% control diet +30% garlic stalk. Results The Korean national yield of garlic stalk (sun-dried basis in 2016 was estimated to be 31,910 tons, with the southern coastal regions producing the highest quantity. Compared with rice straw, garlic stalk had lower NDF, higher ADF, and greater effective degradabilities of DM and NDF, resulting in a greater TDN value (56.3%, which was higher than that obtained for rice straw (43.7%. Conclusion These results provide basic information on the ruminal DM and NDF degradation kinetics of garlic stalk, which would be helpful for the efficient utilization of this by-product in ruminant diets.

  18. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  19. The Cellular Chaperone Heat Shock Protein 90 Is Required for Foot-and-Mouth Disease Virus Capsid Precursor Processing and Assembly of Capsid Pentamers.

    Science.gov (United States)

    Newman, Joseph; Asfor, Amin S; Berryman, Stephen; Jackson, Terry; Curry, Stephen; Tuthill, Tobias J

    2018-03-01

    Productive picornavirus infection requires the hijacking of host cell pathways to aid with the different stages of virus entry, synthesis of the viral polyprotein, and viral genome replication. Many picornaviruses, including foot-and-mouth disease virus (FMDV), assemble capsids via the multimerization of several copies of a single capsid precursor protein into a pentameric subunit which further encapsidates the RNA. Pentamer formation is preceded by co- and posttranslational modification of the capsid precursor (P1-2A) by viral and cellular enzymes and the subsequent rearrangement of P1-2A into a structure amenable to pentamer formation. We have developed a cell-free system to study FMDV pentamer assembly using recombinantly expressed FMDV capsid precursor and 3C protease. Using this assay, we have shown that two structurally different inhibitors of the cellular chaperone heat shock protein 90 (hsp90) impeded FMDV capsid precursor processing and subsequent pentamer formation. Treatment of FMDV permissive cells with the hsp90 inhibitor prior to infection reduced the endpoint titer by more than 10-fold while not affecting the activity of a subgenomic replicon, indicating that translation and replication of viral RNA were unaffected by the drug. IMPORTANCE FMDV of the Picornaviridae family is a pathogen of huge economic importance to the livestock industry due to its effect on the restriction of livestock movement and necessary control measures required following an outbreak. The study of FMDV capsid assembly, and picornavirus capsid assembly more generally, has tended to be focused upon the formation of capsids from pentameric intermediates or the immediate cotranslational modification of the capsid precursor protein. Here, we describe a system to analyze the early stages of FMDV pentameric capsid intermediate assembly and demonstrate a novel requirement for the cellular chaperone hsp90 in the formation of these pentameric intermediates. We show the added complexity

  20. A comparison of soda and soda-AQ pulps from cotton stalks | Akgül ...

    African Journals Online (AJOL)

    In this study, cotton stalks (Gossypium hirsutum L.) were cooked using soda and soda-anthraquinone (AQ) process. Nine soda cooks were conducted by changing cooking conditions including active alkali charge and pulping time. Soda-AQ cooks were obtained by adding 0.075, 0.10, 0.15, 0.2% AQ (based on o.d stalks) to ...

  1. study on the chopping and mixing of cotton stalks with soil | Sa glam ...

    African Journals Online (AJOL)

    -type, splined-type and vertical-blade rotating dredge). Field experiments were conducted with each type to determine the proportion of non-uprooted cotton stalks; mean “post-chopping height” of the stalks, measured from soil surface; and the ...

  2. Stalking Victimization among College Women and Subsequent Help-Seeking Behaviors

    Science.gov (United States)

    Buhi, Eric R.; Clayton, Heather; Surrency, Heather Hepler

    2009-01-01

    Objective: The authors examined the incidence of stalking victimization and subsequent help-seeking behaviors among college women. Participants and Methods: A stratified random sample of college women (N = 391) completed an anonymous Internet-based questionnaire in spring 2006. Results: One-fifth of women reported stalking victimization while…

  3. Radiation-induced grafting of sweet sorghum stalk for copper(II) removal from aqueous solution

    International Nuclear Information System (INIS)

    Dong, Jing; Hu, Jun; Wang, Jianlong

    2013-01-01

    Highlights: • Radiation-induced grafting was used to modify the stalk. • Cellulose, hemicellulose and lignin participated in grafting reaction. • Both the structure and composition of stalk had influence on grafting. • The sorption capacity of the grafted stalk increased about five times. -- Abstract: The influence of main components (cellulose, hemicellulose and lignin) of the sweet sorghum stalk on radiation-induced grafting reaction and adsorption of copper from aqueous solution was investigated. Sweet sorghum stalk was grafted with acrylic acid induced by γ-irradiation. The results showed that the grafted stalk contained 1.6 mmol/g carboxyl groups, and its maximal adsorption capacity was 13.32 mg/g. The cellulose, hemicellulose and lignin of the raw materials were confirmed to involve in grafting reaction through comparing the grafting yield and the structure of the grafted materials. Both the structure and the composition of the sweet sorghum stalk had influence on the grafting reaction and adsorption capacity. The adsorption capacity of the grafted sweet sorghum stalk increased about five times, and the adsorption isotherm of the grafted materials conformed to the Langmuir model. The main mechanism for copper adsorption involved in ion exchange

  4. Victims of stalking in India: A study of girl college students in Tirunelveli City

    Directory of Open Access Journals (Sweden)

    Jaishankar Karuppannan

    2007-01-01

    Full Text Available The word 'stalking' was not commonly known in India, until Priyadharshini Mattoo's case (1996 hit the headlines. Eve teasing, a colloquial word for gender harassment is popularly known and Tamil Nadu Prohibition of Eve-Teasing Act, 1998 on that was developed after the brutal killing of a girl named Sarika Shah in Chennai. Though, stalking is there in the past, it was not acknowledged with this terminology and it was always merged with Eve teasing. On the other hand, stalking is much graver than Eve teasing and it is an obsessive behaviour. After the Matoo's case, the Indian Criminal Justice System awoke and the National Commission for Women is ready with a draft Bill (Sexual Assault Prevention Bill to make the Indian Penal Code more effective against the menace of stalkers. Research studies related to stalking in India are sparse and there is a need to study this phenomenon in depth. This paper presents some results from a study of stalking victims among Girl College students at Tirunelveli City, Tamil Nadu, India. In-depth questionnaire data are drawn on to investigate the course and nature of prolonged stalking in 150 self-defined victims. Findings indicate a pattern of repeated intrusions, the stalking harassment methods, lack of reporting behaviour, and effects of stalking on the victims.

  5. Utilization of bio-waste cotton ( Gossypium hirsutum L.) stalks and ...

    African Journals Online (AJOL)

    ... three-layer particleboard containing different cotton (Gossypium hirsutum L.) stalks and underutilized paulownia (paulownia fortunie) wood particle ratios (30, 50 and 70%) using urea formaldehyde resin. Addition of cotton stalk and paulownia wood in particleboard improved mechanical properties of resulting composites ...

  6. Integrating complex functions: coordination of nuclear pore complex assembly and membrane expansion of the nuclear envelope requires a family of integral membrane proteins.

    Science.gov (United States)

    Schneiter, Roger; Cole, Charles N

    2010-01-01

    The nuclear envelope harbors numerous large proteinaceous channels, the nuclear pore complexes (NPCs), through which macromolecular exchange between the cytosol and the nucleoplasm occurs. This double-membrane nuclear envelope is continuous with the endoplasmic reticulum and thus functionally connected to such diverse processes as vesicular transport, protein maturation and lipid synthesis. Recent results obtained from studies in Saccharomyces cerevisiae indicate that assembly of the nuclear pore complex is functionally dependent upon maintenance of lipid homeostasis of the ER membrane. Previous work from one of our laboratories has revealed that an integral membrane protein Apq12 is important for the assembly of functional nuclear pores. Cells lacking APQ12 are viable but cannot grow at low temperatures, have aberrant NPCs and a defect in mRNA export. Remarkably, these defects in NPC assembly can be overcome by supplementing cells with a membrane fluidizing agent, benzyl alcohol, suggesting that Apq12 impacts the flexibility of the nuclear membrane, possibly by adjusting its lipid composition when cells are shifted to a reduced temperature. Our new study now expands these findings and reveals that an essential membrane protein, Brr6, shares at least partially overlapping functions with Apq12 and is also required for assembly of functional NPCs. A third nuclear envelope membrane protein, Brl1, is related to Brr6, and is also required for NPC assembly. Because maintenance of membrane homeostasis is essential for cellular survival, the fact that these three proteins are conserved in fungi that undergo closed mitoses, but are not found in metazoans or plants, may indicate that their functions are performed by proteins unrelated at the primary sequence level to Brr6, Brl1 and Apq12 in cells that disassemble their nuclear envelopes during mitosis.

  7. IGD motifs, which are required for migration stimulatory activity of fibronectin type I modules, do not mediate binding in matrix assembly.

    Directory of Open Access Journals (Sweden)

    Lisa M Maurer

    Full Text Available Picomolar concentrations of proteins comprising only the N-terminal 70-kDa region (70K of fibronectin (FN stimulate cell migration into collagen gels. The Ile-Gly-Asp (IGD motifs in four of the nine FN type 1 (FNI modules in 70K are important for such migratory stimulating activity. The 70K region mediates binding of nanomolar concentrations of intact FN to cell-surface sites where FN is assembled. Using baculovirus, we expressed wildtype 70K and 70K with Ile-to-Ala mutations in (3FNI and (5FNI; (7FNI and (9FNI; or (3FNI, (5FNI, (7FNI, and (9FNI. Wildtype 70K and 70K with Ile-to-Ala mutations were equally active in binding to assembly sites of FN-null fibroblasts. This finding indicates that IGD motifs do not mediate the interaction between 70K and the cell-surface that is important for FN assembly. Further, FN fragment N-(3FNIII, which does not stimulate migration, binds to assembly sites on FN-null fibroblast. The Ile-to-Ala mutations had effects on the structure of FNI modules as evidenced by decreases in abilities of 70K with Ile-to-Ala mutations to bind to monoclonal antibody 5C3, which recognizes an epitope in (9FNI, or to bind to FUD, a polypeptide based on the F1 adhesin of Streptococcus pyogenes that interacts with 70K by the β-zipper mechanism. These results suggest that the picomolar interactions of 70K with cells that stimulate cell migration require different conformations of FNI modules than the nanomolar interactions required for assembly.

  8. Case of pituitary stalk transection syndrome ascertained after breech delivery.

    Science.gov (United States)

    Fukuta, Kaori; Hidaka, Takao; Ono, Yosuke; Kochi, Keiko; Yasoshima, Kuniaki; Arai, Takashi

    2016-02-01

    Pituitary stalk transection syndrome (PSTS) is a rare complication that can accompany breech delivery. Early diagnosis of this syndrome is difficult, and it may cause a serious delay in the diagnosis. We present a case of PSTS ascertained after breech delivery. A 20-year-old woman presented with primary amenorrhea. The patient was born by breech delivery and had a history of treatment for pituitary dwarfism. Her laboratory findings showed pituitary hypothyroidism, and hormone replacement therapy was initiated. At 28 years old, she became pregnant and had a normal delivery at 38 weeks' gestation. One year after delivery, her thyroid hormone level changed. Laboratory test showed adrenocortical insufficiency, and magnetic resonance imaging of the pituitary gland showed transection of the pituitary stalk and development of an ectopic posterior lobe. These findings were compatible with PSTS. When a patient who has been born by breech delivery presents with symptoms of pituitary deficiency, PSTS should be considered in the differential diagnosis. © 2015 Japan Society of Obstetrics and Gynecology.

  9. Pyrolysis Characteristics of Corn Stalk with Solid Heat Carrier

    Directory of Open Access Journals (Sweden)

    Min Guo

    2015-05-01

    Full Text Available Pyrolysis of corn stalk with a solid heat carrier was studied under temperatures ranging from 430 to 620 °C. The solid heat carrier used was high-temperature ash from a CFB boiler. The yields of three products and their characteristics were investigated. Moreover, the distributions of sulfur and nitrogen in the products were determined. The results indicate that with increasing temperature, the char yield decreased, gas yield increased, and calorific value of the gas increased from 10.13 to 16.65 MJ/m3. The yield of bio-oil reached a maximum, 14.24 wt.%, at 510 °C. Light-oil in the bio-oil accounted for more than 69.12 wt.%. The elemental composition of the char and char ash were analyzed. The distribution of sulfur and nitrogen in the char decreased to 60.44 and 46.52 wt.%, respectively, depending on the raw materials used. These results provide basic data for the possible industrial application of corn stalk.

  10. Stalking of psychiatrists: psychopathological characteristics and gender differences in an Italian sample.

    Science.gov (United States)

    Mastronardi, Vincenzo M; Pomilla, Antonella; Ricci, Serafino; D'Argenio, Alberto

    2013-05-01

    Research has indicated that medical doctors and paramedics are at higher risk of being stalked than the general population. In particular, mental health care professionals alone represent one third of the victims of harassment. Because of the lack of studies in this specific sector, especially in Italy, in this study, we examined the stalking of psychiatrists by their patients, considering gender differences and the incidence of stalking in private practice and public mental health clinics in Rome. We found that the rate of stalking in private mental health settings is higher than that in public settings and that the perpetrators of stalking are mainly women who mostly target mental health professionals working in private practice. Implications of the findings are noted and discussed.

  11. NSF- and SNARE-mediated membrane fusion is required for nuclear envelope formation and completion of nuclear pore complex assembly in Xenopus laevis egg extracts.

    Science.gov (United States)

    Baur, Tina; Ramadan, Kristijan; Schlundt, Andreas; Kartenbeck, Jürgen; Meyer, Hemmo H

    2007-08-15

    Despite the progress in understanding nuclear envelope (NE) reformation after mitosis, it has remained unclear what drives the required membrane fusion and how exactly this is coordinated with nuclear pore complex (NPC) assembly. Here, we show that, like other intracellular fusion reactions, NE fusion in Xenopus laevis egg extracts is mediated by SNARE proteins that require activation by NSF. Antibodies against Xenopus NSF, depletion of NSF or the dominant-negative NSF(E329Q) variant specifically inhibited NE formation. Staging experiments further revealed that NSF was required until sealing of the envelope was completed. Moreover, excess exogenous alpha-SNAP that blocks SNARE function prevented membrane fusion and caused accumulation of non-flattened vesicles on the chromatin surface. Under these conditions, the nucleoporins Nup107 and gp210 were fully recruited, whereas assembly of FxFG-repeat-containing nucleoporins was blocked. Together, we define NSF- and SNARE-mediated membrane fusion events as essential steps during NE formation downstream of Nup107 recruitment, and upstream of membrane flattening and completion of NPC assembly.

  12. Hormonal regulation of the growth of leaves and inflorescence stalk in Muscari armeniacum Leichtl.

    Directory of Open Access Journals (Sweden)

    Marian Saniewski

    2016-04-01

    Full Text Available It is known that chilling of Muscari bulbs is necessary for the growth of the inflorescence stalk and flowering, but not for the growth of leaves. Gibberellic acid (GA accelerated stem growth and flowering in chilled Muscari bulbs. In the present experiment it was shown that in unchilled derooted Muscari bulbs the growth of leaves, but not the growth of the inflorescence stalk, was observed when bulbs were stored in water, GA at a concentration of 50 and 100 mg/L, benzyladenine (BA at a concentration of 25 and 50 mg/L, or a mixture of GA+BA (50+25 mg/L, but abscisic acid (ABA at a concentration of 10 mg/L greatly inhibited the growth of leaves. In chilled derooted Muscari bulbs the growth of leaves and inflorescence stalk was observed when bulbs were stored in water or GA, but BA and GA+BA treatments totally inhibited the growth of the inflorescence stalk without an effect on the growth of leaves. These results clearly showed that the growth of leaves and inflorescence stalk in Muscari bulbs are controlled by plant growth regulators in different ways. ABA totally inhibited the growth of leaves and inflorescence stalk in chilled derooted Muscari bulbs. It was shown that after the excision of the inflorescence bud in cultivated chilled Muscari bulbs, the inflorescence stalk died, but application of indole-3-acetic acid (IAA 0.5% in the place of the removed inflorescence bud induced the growth of the inflorescence stalk. IAA applied under the inflorescence bud inhibited the development of flowers (flower-bud blasting and induced the growth of the inflorescence stalk below the treatment site. These results are discussed with reference to hormonal regulation of stem (stalk growth in tulip, narcissus, hyacinth, and Hippeastrum.

  13. Flute type micropores activated carbon from cotton stalk for high performance supercapacitors

    Science.gov (United States)

    Tian, Xun; Ma, Hongru; Li, Zhe; Yan, Shaocun; Ma, Lei; Yu, Feng; Wang, Gang; Guo, Xuhong; Ma, Yanqing; Wong, Chingping

    2017-08-01

    Flute type micropores activated carbon (FTMAC) has been successfully obtained from cotton stalk via KOH-chemical activation method. The synthesized carbon material exhibits an ordered pore structure with high specific surface area of 1964.46 m2 g-1 and pore volume of 1.03 m3 g-1. The assembled FTMAC-based electrode delivers a high specific capacitance of 254 F g-1 at a current density of 0.2 A g-1 in 1 M H2SO4 aqueous electrolyte. It still can maintain 221 F g-1at a current density of 10 A g-1, demonstrating a good rate capacity (87% retention), as well as long cyclic stability of 96% capacitance retention after 10000 charging and discharging cycles at current density of 1 A g-1. Moreover, the symmetric supercapacitor can deliver a high energy density of 18.14 W h kg-1 and a power density of 450.37 W kg-1 which is operated in the voltage range of 0-1.8 V.

  14. The meiosis-specific nuclear passenger protein is required for proper assembly of forespore membrane in fission yeast.

    Science.gov (United States)

    Takaine, Masak; Imada, Kazuki; Numata, Osamu; Nakamura, Taro; Nakano, Kentaro

    2014-10-15

    Sporulation, gametogenesis in yeast, consists of meiotic nuclear division and spore morphogenesis. In the fission yeast Schizosaccharomyces pombe, the four haploid nuclei produced after meiosis II are encapsulated by the forespore membrane (FSM), which is newly synthesized from spindle pole bodies (SPBs) in the cytoplasm of the mother cell as spore precursors. Although the coordination between meiosis and FSM assembly is vital for proper sporulation, the underlying mechanism remains unclear. In the present study, we identified a new meiosis-specific protein Npg1, and found that it was involved in the efficient formation of spores and spore viability. The accumulation and organization of the FSM was compromised in npg1-null cells, leading to the error-prone envelopment of nuclei. Npg1 was first seen as internuclear dots and translocated to the SPBs before the FSM assembled. Genetic analysis revealed that Npg1 worked in conjunction with the FSM proteins Spo3 and Meu14. These results suggest a possible signaling link from the nucleus to the meiotic SPBs in order to associate the onset of FSM assembly with meiosis II, which ensures the successful partitioning of gametic nuclei. © 2014. Published by The Company of Biologists Ltd.

  15. Sex-biased gene expression during head development in a sexually dimorphic stalk-eyed fly.

    Directory of Open Access Journals (Sweden)

    Gerald S Wilkinson

    Full Text Available Stalk-eyed flies (family Diopsidae are a model system for studying sexual selection due to the elongated and sexually dimorphic eye-stalks found in many species. These flies are of additional interest because their X chromosome is derived largely from an autosomal arm in other flies. To identify candidate genes required for development of dimorphic eyestalks and investigate how sex-biased expression arose on the novel X, we compared gene expression between males and females using oligonucleotide microarrays and RNA from developing eyestalk tissue or adult heads in the dimorphic diopsid, Teleopsis dalmanni. Microarray analysis revealed sex-biased expression for 26% of 3,748 genes expressed in eye-antennal imaginal discs and concordant sex-biased expression for 86 genes in adult heads. Overall, 415 female-biased and 482 male-biased genes were associated with dimorphic eyestalk development but not differential expression in the adult head. Functional analysis revealed that male-biased genes are disproportionately associated with growth and mitochondrial function while female-biased genes are associated with cell differentiation and patterning or are novel transcripts. With regard to chromosomal effects, dosage compensation occurs by elevated expression of X-linked genes in males. Genes with female-biased expression were more common on the X and less common on autosomes than expected, while male-biased genes exhibited no chromosomal pattern. Rates of protein evolution were lower for female-biased genes but higher for genes that moved on or off the novel X chromosome. These findings cannot be due to meiotic sex chromosome inactivation or by constraints associated with dosage compensation. Instead, they could be consistent with sexual conflict in which female-biased genes on the novel X act primarily to reduce eyespan in females while other genes increase eyespan in both sexes. Additional information on sex-biased gene expression in other tissues and

  16. Crystal Structure of Marburg Virus VP40 Reveals a Broad, Basic Patch for Matrix Assembly and a Requirement of the N-Terminal Domain for Immunosuppression.

    Science.gov (United States)

    Oda, Shun-Ichiro; Noda, Takeshi; Wijesinghe, Kaveesha J; Halfmann, Peter; Bornholdt, Zachary A; Abelson, Dafna M; Armbrust, Tammy; Stahelin, Robert V; Kawaoka, Yoshihiro; Saphire, Erica Ollmann

    2016-02-15

    Marburg virus (MARV), a member of the filovirus family, causes severe hemorrhagic fever with up to 90% lethality. MARV matrix protein VP40 is essential for assembly and release of newly copied viruses and also suppresses immune signaling in the infected cell. Here we report the crystal structure of MARV VP40. We found that MARV VP40 forms a dimer in solution, mediated by N-terminal domains, and that formation of this dimer is essential for budding of virus-like particles. We also found the N-terminal domain to be necessary and sufficient for immune antagonism. The C-terminal domains of MARV VP40 are dispensable for immunosuppression but are required for virus assembly. The C-terminal domains are only 16% identical to those of Ebola virus, differ in structure from those of Ebola virus, and form a distinct broad and flat cationic surface that likely interacts with the cell membrane during virus assembly. Marburg virus, a cousin of Ebola virus, causes severe hemorrhagic fever, with up to 90% lethality seen in recent outbreaks. Molecular structures and visual images of the proteins of Marburg virus are essential for the development of antiviral drugs. One key protein in the Marburg virus life cycle is VP40, which both assembles the virus and suppresses the immune system. Here we provide the molecular structure of Marburg virus VP40, illustrate differences from VP40 of Ebola virus, and reveal surfaces by which Marburg VP40 assembles progeny and suppresses immune function. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  17. Effect of Banana Stalk Organic Fertilizer on the Growth of Chinese Cabbage

    Institute of Scientific and Technical Information of China (English)

    Zheli; DING; Lina; HAN; Zhiqiang; JIN; Bizun; WANG; Huicai; ZENG; Wei; ZHENG; Yingdui; HE; Xiaoping; ZANG

    2016-01-01

    In order to solve the problem of waste disposal after banana harvest,we use banana stalk to produce banana stalk organic fertilizer,through a plot experiment. We compare the influence of normal organic fertilizer( Wanlubao) and banana stalk organic fertilizer as base fertilizers on Chinese cabbage growth,and evaluate the economic benefits of banana stalk organic fertilizer. The results show that organic fertilizer has little effect on water content and nutrient content of Chinese cabbage,but has significant effect on plant height and leaf width. Using organic fertilizer can increase the production of Chinese cabbage by 22. 50%- 43. 10%. With 6750 kg / ha normal organic fertilizer,Chinese cabbage gets the highest yield,which reaches 30135 kg / ha,followed by the treatment of 6750 kg / ha stalk organic fertilizer. At farmers’ conventional fertilization level( 4500 kg / ha),stalk organic fertilizer can increase the yield by more than 3. 50% in comparison with the normal organic fertilizer,and the economic benefit increases by 1800 yuan / ha. As a kind of banana waste cycling product,banana stalk organic fertilizer is of low cost and good effect,and can be used instead of normal organic fertilizer.

  18. Lithotrophic iron-oxidizing bacteria produce organic stalks to control mineral growth: implications for biosignature formation

    Energy Technology Data Exchange (ETDEWEB)

    Chan, Clara S; Fakra, Sirine C; Emerson, David; Fleming, Emily J; Edwards, Katrina J

    2011-07-01

    Neutrophilic Fe-oxidizing bacteria (FeOB) are often identified by their distinctive morphologies, such as the extracellular twisted ribbon-like stalks formed by Gallionella ferruginea or Mariprofundus ferrooxydans. Similar filaments preserved in silica are often identified as FeOB fossils in rocks. Although it is assumed that twisted iron stalks are indicative of FeOB, the stalk's metabolic role has not been established. To this end, we studied the marine FeOB M. ferrooxydans by light, X-ray and electron microscopy. Using time-lapse light microscopy, we observed cells excreting stalks during growth (averaging 2.2 {micro}m h(-1)). Scanning transmission X-ray microscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy show that stalks are Fe(III)-rich, whereas cells are low in Fe. Transmission electron microscopy reveals that stalks are composed of several fibrils, which contain few-nanometer-sized iron oxyhydroxide crystals. Lepidocrocite crystals that nucleated on the fibril surface are much larger ({approx}100 nm), suggesting that mineral growth within fibrils is retarded, relative to sites surrounding fibrils. C and N 1s NEXAFS spectroscopy and fluorescence probing show that stalks primarily contain carboxyl-rich polysaccharides. On the basis of these results, we suggest a physiological model for Fe oxidation in which cells excrete oxidized Fe bound to organic polymers. These organic molecules retard mineral growth, preventing cell encrustation. This model describes an essential role for stalk formation in FeOB growth. We suggest that stalk-like morphologies observed in modern and ancient samples may be correlated confidently with the Fe-oxidizing metabolism as a robust biosignature.

  19. Victims of stalking in India: A study of girl college students in Tirunelveli City

    OpenAIRE

    Jaishankar Karuppannan; Kosalai Puthisigamani

    2007-01-01

    The word 'stalking' was not commonly known in India, until Priyadharshini Mattoo's case (1996) hit the headlines. Eve teasing, a colloquial word for gender harassment is popularly known and Tamil Nadu Prohibition of Eve-Teasing Act, 1998 on that was developed after the brutal killing of a girl named Sarika Shah in Chennai. Though, stalking is there in the past, it was not acknowledged with this terminology and it was always merged with Eve teasing. On the other hand, stalking is much graver t...

  20. The baculovirus core gene ac83 is required for nucleocapsid assembly and per os infectivity of Autographa californica nucleopolyhedrovirus.

    Science.gov (United States)

    Zhu, Shimao; Wang, Wei; Wang, Yan; Yuan, Meijin; Yang, Kai

    2013-10-01

    Autographa californica multiple nucleopolyhedrovirus (AcMNPV) ac83 is a baculovirus core gene whose function in the AcMNPV life cycle is unknown. In the present study, an ac83-knockout AcMNPV (vAc83KO) was constructed to investigate the function of ac83 through homologous recombination in Escherichia coli. No budded virions were produced in vAc83KO-transfected Sf9 cells, although viral DNA replication was unaffected. Electron microscopy revealed that nucleocapsid assembly was aborted due to the ac83 deletion. Domain-mapping studies revealed that the expression of Ac83 amino acid residues 451 to 600 partially rescued the ability of AcMNPV to produce infectious budded virions. Bioassays indicated that deletion of the chitin-binding domain of Ac83 resulted in the failure of oral infection of Trichoplusia ni larvae by AcMNPV, but AcMNPV remained infectious following intrahemocoelic injection, suggesting that the domain is involved in the binding of occlusion-derived virions to the peritrophic membrane and/or to other chitin-containing insect tissues. It has been demonstrated that Ac83 is the only component with a chitin-binding domain in the per os infectivity factor complex on the occlusion-derived virion envelope. Interestingly, a functional inner nuclear membrane sorting motif, which may facilitate the localization of Ac83 to the envelopes of occlusion-derived virions, was identified by immunofluorescence analysis. Taken together, these results demonstrate that Ac83 plays an important role in nucleocapsid assembly and the establishment of oral infection.

  1. Discovery of dense aggregations of stalked crinoids in Izu-Ogasawara trench, Japan.

    Science.gov (United States)

    Oji, Tatsuo; Ogawa, Yujiro; Hunter, Aaron W; Kitazawa, Kota

    2009-06-01

    Stalked crinoids are recognized as living fossils that typically inhabit modern deep-water environments exceeding 100 m. Previous records of stalked crinoids from hadal depths (exceeding 6000 m) are extremely rare, and no in-situ information has been available. We show here that stalked crinoids live densely on rocky substrates at depths over 9000 m in the Izu-Ogasawara Trench off the eastern coast of Japan, evidenced by underwater photos and videos taken by a remotely operated vehicle. This is the deepest in-situ observation of stalked crinoids and demonstrates that crinoid meadows can exist at hadal depths close to the deepest ocean floor, in a fashion quite similar to populations observed in shallower depths.

  2. The Intersection of Stalking and the Severity of Intimate Partner Abuse.

    Science.gov (United States)

    Brady, Patrick Q; Hayes, Brittany E

    2018-04-01

    Using data from the Chicago Women's Health Risk Study (N = 464), this study examined the intersection of stalking and the severity of intimate partner abuse while controlling for previously identified risk factors of intimate partner homicide. Findings indicate that (a) victims of life-threatening abuse by an intimate partner were significantly more likely to experience stalking than victims of nonlethal abuse; (b) after controlling for key risk factors, stalking increased the risk of life-threatening abuse; and (c) threats to kill the victim if she left was the only significant stalking-related behavior that increased the risk for life-threatening abuse. In addition, an offender's prior record and a higher number of previous abusive incidents increased the risk of life-threatening abuse. Implications for prevention and future directions for research are discussed.

  3. Study of Nutrient Content Variation in Bulb And Stalk of Onions ...

    African Journals Online (AJOL)

    acer

    Keywords: Onion bulbs and stalks, proximate, nutrient elements, vitamins A and C; oxalate. ... application of fertilizers, manure, compost and ..... iron products, the use of natural source of Fe such .... in Fish and Sediment from Kubanni River,.

  4. Colonization of habitat islands in the deep sea: recruitment to glass sponge stalks

    Science.gov (United States)

    Beaulieu, Stace E.

    2001-04-01

    Biogenic structures in the deep sea often act as hard substratum 'islands' for the attachment of encrusting fauna. At an abyssal station in the NE Pacific, stalks of hexactinellid sponges in the genus Hyalonema are habitat islands for species-rich epifaunal communities. An experimental study was conducted to (1) determine the colonization rates of artificial Hyalonema stalks, (2) compare the species composition and diversity of recruits to newly available substrata to that of the natural communities, and (3) examine the vertical distribution of recruits. Four sets of six artificial sponge stalks, constructed of Hyalonema spicules, were deployed at 4100 m depth for 3- to 5-month periods. There was no difference in net colonization or immigration rate among the four deployments. Colonization rates were similar to those reported for other deep-sea, hard substratum recruitment experiments. The taxa that recruited to the artificial stalks were a subset of the taxa found in natural communities. However, several taxa important in structuring natural communities did not recruit to the artificial stalks. The two taxa with the highest invasion rates, a calcareous foraminiferan ( Cibicides lobatulus) and a serpulid polychaete ( Bathyvermilia sp.), also were the two taxa with greatest relative abundance in natural communities. Vertical distributions of Cibicides and an agglutinated foraminiferan ( Telammina sp.) were skewed towards the top of the artificial stalks, potentially because of active habitat selection. These results have several implications for natural Hyalonema stalk communities. Most importantly, species composition and abundance of individuals in the stalk communities appear to be maintained by frequent recruitment of a few common taxa and infrequent recruitment of many rare taxa. An argument is presented for temporal-mosaic maintenance of diversity in these deep-sea, hard substratum communities.

  5. vph6 mutants of Saccharomyces cerevisiae require calcineurin for growth and are defective in vacuolar H(+)-ATPase assembly.

    Science.gov (United States)

    Hemenway, C S; Dolinski, K; Cardenas, M E; Hiller, M A; Jones, E W; Heitman, J

    1995-11-01

    We have characterized a Saccharomyces cerevisiae mutant strain that is hypersensitive to cyclosporin A (CsA) and FK506, immunosuppressants that inhibit calcineurin, a serine-threonine-specific phosphatase (PP2B). A single nuclear mutation, designated cev1 for calcineurin essential for viability, is responsible for the CsA-FK506-sensitive phenotype. The peptidyl-prolyl cis-trans isomerases cyclophilin A and FKBP12, respectively, mediate CsA and FK506 toxicity in the cev1 mutant strain. We demonstrate that cev1 is an allele of the VPH6 gene and that vph6 mutant strains fail to assemble the vacuolar H(+)-ATPase (V-ATPase). The VPH6 gene was mapped on chromosome VIII and is predicted to encode a 181-amino acid (21 kD) protein with no identity to other known proteins. We find that calcineurin is essential for viability in many mutant strains with defects in V-ATPase function or vacuolar acidification. In addition, we find that calcineurin modulates extracellular acidification in response to glucose, which we propose occurs via calcineurin regulation of the plasma membrane H(+)-ATPase PMA1. Taken together, our findings suggest calcineurin plays a general role in the regulation of cation transport and homeostasis.

  6. Effect of Mowing Cotton Stalks and Preventing Plant Re-Growth on Post-Harvest Reproduction of Meloidogyne incognita

    Science.gov (United States)

    Davis, Richard F.; Kemerait, Robert C.

    2010-01-01

    The southern root-knot nematode (Meloidogyne incognita) is a major parasite of cotton in the U.S., and management tactics for this nematode attempt to minimize population levels. We compared three post-harvest practices for their ability to reduce nematode population levels in the field, thereby reducing initial nematode population for the next year's crop. The three practices tested were: 1) chemical defoliation before harvest plus cutting cotton stalks after harvest, 2) chemical defoliation plus applying a herbicide to kill plants prior to cutting the stalks, and 3) chemical defoliation without cutting stalks. Experiments were conducted in both the greenhouse and in the field. The greenhouse experiments demonstrated that M. incognita reproduction (measured as egg counts and root gall rating indices) was significantly greater when stalks were not cut. Cutting stalks plus applying herbicide to kill cotton roots did not significantly reduce nematode reproduction compared to cutting stalks alone. In field experiments, cutting stalks reduced egg populations and root galling compared to defoliation without stalk cutting. In a greenhouse bioassay which used soil from the field plots, plants grown in soil from the defoliation only treatment had greater root gall ratings and egg counts than in the stalk cutting plus herbicide treatment. Therefore, we conclude that cutting cotton stalks immediately after harvest effectively reduces M. incognita reproduction, and may lead to a lower initial population density of this nematode in the following year. PMID:22736845

  7. Fuel assemblies

    International Nuclear Information System (INIS)

    Echigoya, Hironori; Nomata, Terumitsu.

    1983-01-01

    Purpose: To render the axial distribution relatively flat. Constitution: First nuclear element comprises a fuel can made of zircalloy i.e., the metal with less neutron absorption, which is filled with a plurality of UO 2 pellets and sealed by using a lower end plug, a plenum spring and an upper end plug by means of welding. Second fuel element is formed by substituting a part of the UO 2 pellets with a water tube which is sealed with water and has a space for allowing the heat expansion. The nuclear fuel assembly is constituted by using the first and second fuel elements together. In such a structure, since water reflects neutrons and decrease their leakage to increase the temperature, reactivity is added at the upper portion of the fuel assembly to thereby flatten the axial power distribution. Accordingly, stable operation is possible only by means of deep control rods while requiring no shallow control rods. (Sekiya, K.)

  8. Time Course of Resolution of Hyperprolactinemia After Transsphenoidal Surgery Among Patients Presenting with Pituitary Stalk Compression.

    Science.gov (United States)

    Zaidi, Hasan A; Cote, David J; Castlen, Joseph P; Burke, William T; Liu, Yong-Hui; Smith, Timothy R; Laws, Edward R

    2017-01-01

    Primary lactotroph disinhibition, or stalk effect, occurs when mechanical compression of the pituitary stalk disrupts the tonic inhibition by dopamine released by the hypothalamus. The resolution of pituitary stalk effect-related hyperprolactinemia postoperatively has not been studied in a large cohort of patients. We performed a retrospective review to investigate the time course of recovery of lactotroph disinhibition after transsphenoidal surgery. Medical records were retrospectively reviewed for all patients undergoing transsphenoidal surgery with the senior author from April 2008 to November 2014. Of 556 pituitary adenomas, 289 (52.0%) were eliminated: 77 (13.9%) had an immunohistochemically confirmed prolactinoma, 119 (21.4%) patients had previous surgery, 93 (16.7%) had incomplete medical records, leaving 267 patients (48.0%) for final analysis. Of these patients, 72 (27.0%) had increased serum prolactin levels (≥23.3 ng/mL), suggestive of pituitary stalk effect (maximum prolactin level = 148.0 ng/mL). Patients with stalk effect were more likely than those with normal serum prolactin levels to present with menstrual dysfunction (29.7% vs. 19.4%; P Transsphenoidal surgery can provide durable normalization of serum prolactin levels and related symptoms caused by pituitary stalk compression-related lactotroph disinhibition. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Behavioral and Mental Health Correlates of Youth Stalking Victimization: A Latent Class Approach.

    Science.gov (United States)

    Reidy, Dennis E; Smith-Darden, Joanne P; Kernsmith, Poco D

    2016-12-01

    Although recognized as a public health problem, little attention has been paid to the problem of stalking among youth. Latent profile analysis was used to identify latent groups of adolescent stalking victims and their behavioral and mental health correlates. A cross-sectional sample of 1,236 youths were randomly selected from 13 schools stratified by community risk level (i.e., low, moderate, and high risk) and gender. Students completed surveys assessing behavioral indicators of stalking victimization, as well as substance use, sexual behavior, dating violence, and psychiatric symptoms. Data were collected in 2013 and data analyses were performed in 2015. Analysis indicated the presence of a non-victim class, a minimal exposure class, and a victim class for boys and girls alike. Approximately 14% of girls and 13% of boys were in the stalking victim class. Adolescents in the victim class reported more symptoms of post-traumatic stress, mood disorder, and hopelessness, as well as more instances of alcohol use, binge drinking, and physical dating violence victimization. Girls in the victim class also reported engaging in sexting behaviors and oral sex with significantly more partners than their non-victim peers. These findings provide valuable knowledge of the prevalence and pertinent health correlates of stalking victimization in adolescence. The data suggest a substantial proportion of adolescents are victims of stalking and are likewise at risk for a number of deleterious health outcomes. As such, this population merits further attention by prevention researchers and practitioners. Published by Elsevier Inc.

  10. Enzymatic saccharification of high pressure assist-alkali pretreated cotton stalk and structural characterization.

    Science.gov (United States)

    Du, Shuang-kui; Su, Xia; Yang, Weihua; Wang, Yanqin; Kuang, Meng; Ma, Lei; Fang, Dan; Zhou, Dayun

    2016-04-20

    Cotton stalk is a potential biomass for bioethanol production, while the conversion of direct saccharification or biotransformation of cotton stalk is extremely low due to the recalcitrant nature of lignocellulose. To enhance the enzymatic conversion of cotton stalks, the enzymatic saccharification parameters of high pressure assist-alkali pretreatment (HPAP) cotton stalk were optimized in the present study. Results indicated that a maximum reducing sugar yield of 54.7g/100g dry biomass cellulose was achieved at a substrate concentration of 2%, 100rpm agitation, 0.6g/g enzyme loading, 40°C hydrolysis temperature, 50h saccharification time, and pH 5.0. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy were used to identify structural changes in native, pretreated biomass and hydrolyzed residues. Structural analysis revealed large part of amorphous cellulose and partial crystalline cellulose in the HPAP cotton stalk were hydrolyzed during enzymatic treatment. HPAP cotton stalk can be used as a potential feed stock for bioethanol production. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Extraction and Hydrophobic Modification of Cotton Stalk Bark Fiber

    Directory of Open Access Journals (Sweden)

    Ya-Yu Li

    2016-01-01

    Full Text Available Cotton stalk bark fiber (CSBF was extracted at high temperature and under high pressure, under the condition of the alkali content of 11 wt%. Experimental results proved that the extraction yield of CSBF was 27.3 wt%, and the residual alkali concentration was 2.1 wt%. Then five kinds of modifiers including methyl methacrylate (MMA, MMA plus initiator, epoxy propane, copper ethanolamine, and silane coupling agent were chosen to modify the surface of CSBF. It was found by measuring water retention value (WRV that these five kinds of modifiers were all effective and the silane coupling agent was best modifier among all. The optimal modifying conditions of silane coupling agent were obtained: modifier concentration was 5%, the mixing temperature was 20°C, the mixing time was 1 h, and vacuum drying time was 1 h. Under the optimal condition, the WRV of the modified CSBF was 89%. It is expected that these modified CSBF may be a filler with strengthening effect in wood plastic composites (WPC fields.

  12. Gonadotrophic status in adolescents with pituitary stalk interruption syndrome.

    Science.gov (United States)

    Rottembourg, Diane; Linglart, Agnès; Adamsbaum, Catherine; Lahlou, Najiba; Teinturier, Cécile; Bougnères, Pierre; Carel, Jean-Claude

    2008-07-01

    Pituitary stalk interruption syndrome (PSIS) is a frequent cause of GH deficiency (GHD) and is commonly associated with other PH deficiencies (PHDs). Although previous reports have correlated multiple PHDs with severe anatomical lesions, the status of the gonadotrophic axis has not yet been thoroughly analysed. We retrospectively reviewed the medical records of 27 patients (15 males, 12 females) with GHD and PSIS defined by MRI findings. The status of the gonadotrophic axis was evaluated in children who were at least 14.5 years (boys) or 13 years (girls). Out of 27 patients, five displayed spontaneous full pubertal development with normal hormonal values at the final evaluation, whereas 22 of 27 patients (81%) had complete (n = 18) or partial pubertal deficiency. Three girls had primary amenorrhoea with normal gonadotrophin values, raising the possibility of subtle disturbances of gonadotrophin pulsatility. Of the 21 patients with TSH or ACTH deficiency, 17 (81%) had complete gonadotrophin deficiency. Two of our six patients with apparently isolated GHD during childhood had gonadotrophin deficiency. Cryptorchidism was present at birth in six boys (40%). Of these six boys, one had normal pubertal development. Ten of 11 boys with micropenis at birth had gonadotrophin deficiency. Gonadotrophin deficiency is a common finding in adolescents with PSIS and is frequently associated with other PHDs. However its severity is variable, ranging from complete gonadotrophin deficiency to normogonadotrophic amenorrhoea. The occurrence of gonadotrophin deficiency in 33% of children with apparently isolated GHD and PSIS has important implications for the counselling and follow-up of these patients.

  13. Fast pyrolysis product distribution of biopretreated corn stalk by methanogen.

    Science.gov (United States)

    Wang, Tipeng; Ye, Xiaoning; Yin, Jun; Jin, Zaixing; Lu, Qiang; Zheng, Zongming; Dong, Changqing

    2014-10-01

    After pretreated by methanogen for 5, 15 and 25 days, corn stalk (CS) were pyrolyzed at 250, 300, 350, 400, 450 and 500 °C by Py-GC/MS and product distribution in bio-oil was analyzed. Results indicated that methanogen pretreatment changed considerably the product distribution: the contents of sugar and phenols increased; the contents of linear carbonyls and furans decreased; the contents of linear ketones and linear acids changed slightly. Methanogen pretreatment improved significantly the pyrolysis selectivity of CS to phenols especially 4-VP. At 250 °C, the phenols content increased from 42.25% for untreated CS to 79.32% for biopretreated CS for 5 days; the 4-VP content increased from 28.6% to 60.9%. Increasing temperature was contributed to convert more lignin into 4-VP, but decreased its content in bio-oil due to more other chemicals formed. The effects of biopretreatment time on the chemicals contents were insignificant. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Light absorption of organic aerosol from pyrolysis of corn stalk

    Science.gov (United States)

    Li, Xinghua; Chen, Yanju; Bond, Tami C.

    2016-11-01

    Organic aerosol (OA) can absorb solar radiation in the low-visible and ultra-violet wavelengths thereby modifying radiative forcing. Agricultural waste burning emits a large quantity of organic carbon in many developing countries. In this work, we improved the extraction and analysis method developed by Chen and Bond, and extended the spectral range of OC absorption. We examined light absorbing properties of primary OA from pyrolysis of corn stalk, which is a major type of agricultural wastes. Light absorption of bulk liquid extracts of OA was measured using a UV-vis recording spectrophotometer. OA can be extracted by methanol at 95%, close to full extent, and shows polar character. Light absorption of organic aerosol has strong spectral dependence (Absorption Ångström exponent = 7.7) and is not negligible at ultra-violet and low-visible regions. Higher pyrolysis temperature produced OA with higher absorption. Imaginary refractive index of organic aerosol (kOA) is 0.041 at 400 nm wavelength and 0.005 at 550 nm wavelength, respectively.

  15. Cytotoxic Triterpenoids from the Stalks of Microtropis triflora.

    Science.gov (United States)

    Zhang, Xiao-Wei; Wang, Kui-Wu; Zhou, Man-Qing

    2017-07-01

    Bioassay-guided phytochemical investigation of the stalks of Microtropis triflora Merr. & F.L. Freeman led to the isolation of ten triterpenes 1 - 10, including one novel compound 3,24-epoxy-2α,24-dihydroxyfriedelan-29-oic acid (1). Their chemical structures were identified on the basis of spectroscopic analysis, including HR-ESI mass spectrometry, 1D- and 2D-NMR ( 1 H, 13 C, 1 H, 1 H-COSY, HSQC, HMBC, and NOESY), and by comparison with the data reported. The cytotoxicities of compounds 1 - 10 against a panel of cultured human tumor cell lines (Bcap37, SMMC7721, HeLa, CNE) were evaluated. The new compound 1 showed moderate anti-tumor activities with IC 50 values of 39.22, 29.24, 23.28, and 68.81 μm/ml, respectively. These results might be helpful for explaining the use of M. triflora in traditional medicine. Triterpenes are characteristic of Microtropis genus and could be useful as potential chemotaxonomic markers. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

  16. An N-terminal formyl methionine on COX 1 is required for the assembly of cytochrome c oxidase

    DEFF Research Database (Denmark)

    Hinttala, Reetta; Sasarman, Florin; Nishimura, Tamiko

    2015-01-01

    Protein synthesis in mitochondria is initiated by formylmethionyl-tRNA(Met) (fMet-tRNA(Met)), which requires the activity of the enzyme MTFMT to formylate the methionyl group. We investigated the molecular consequences of mutations in MTFMT in patients with Leigh syndrome or cardiomyopathy. All p...

  17. Cyber stalking victimisation of women: Evaluating the effectiveness of current laws in India from restorative justice and therapeutic jurisprudential perspectives

    Directory of Open Access Journals (Sweden)

    Halder Debarati

    2015-01-01

    Full Text Available Victimisation of women through cyber stalking is one of the most serious crimes against women. Many countries including India have developed laws regulating cyber stalking. This article argues that since both, restorative justice (RJ and therapeutic jurisprudence (TJ are victim oriented, the issue of cyber stalking of women may be dealt with by RJ process and the laws in this regard must be analysed by the legal actors with a background in RJ and TJ philosophy. India had earlier taken up therapeutic punishment policy to enforce rights of the accused. But the modern principles of TJ have still not been considered in the RJ background in cyber stalking cases. This article therefore examines whether RJ and TJ principles can replace retributive principles for cyber stalking victimisation. It also examines the Indian cyber stalking law from RJ and TJ perspectives to assess its effectiveness for victims.

  18. A novel chromosome region maintenance 1-independent nuclear export signal of the large form of hepatitis delta antigen that is required for the viral assembly.

    Science.gov (United States)

    Lee, C H; Chang, S C; Wu, C H; Chang, M F

    2001-03-16

    Hepatitis delta virus (HDV) is a satellite virus of hepatitis B virus, as it requires hepatitis B virus for virion production and transmission. We have previously demonstrated that sequences within the C-terminal 19-amino acid domain flanking the isoprenylation motif of the large hepatitis delta antigen (HDAg-L) are important for virion assembly. In this study, site-directed mutagenesis and immunofluorescence staining demonstrated that in the absence of hepatitis B virus surface antigen (HBsAg), the wild-type HDAg-L was localized in the nuclei of transfected COS7 cells. Nevertheless, in the presence of HBsAg, the HDAg-L became both nuclei- and cytoplasm-distributed in about half of the cells. An HDAg-L mutant with a substitution of Pro-205 to alanine could neither form HDV-like particles nor shift the subcellular localization in the presence of HBsAg. In addition, nuclear trafficking of HDAg-L in heterokaryons indicated that HDAg-L is a nucleocytoplasmic shuttling protein. A proline-rich HDAg peptide spanning amino acid residues 198 to 210, designated NES(HDAg-L), can function as a nuclear export signal (NES) in Xenopus oocytes. Pro-205 is critical for the NES function. Furthermore, assembly of HDV is insensitive to leptomycin B, indicating that the NES(HDAg-L) directs nuclear export of HDAg-L to the cytoplasm via a chromosome region maintenance 1-independent pathway.

  19. Experimental co-digestion of corn stalk and vermicompost to improve biogas production

    International Nuclear Information System (INIS)

    Chen Guangyin; Zheng Zheng; Yang Shiguan; Fang Caixia; Zou Xingxing; Luo Yan

    2010-01-01

    Anaerobic co-digestion of corn stalk and vermicompost (VC) as well as mono-digestion of corn stalk were investigated. Batch mono-digestion experiments were performed at 35 ± 1 o C and initial total solid loading (TSL) ranged from 1.2% to 6.0%. Batch co-digestion experiments were performed at 35 ± 1 o C and initial TSL of 6% with VC proportions ranged from 20% to 80% of total solid (TS). For mono-digestion of corn stalk, a maximum methane yield of 217.60 ± 13.87 mL/g TS added was obtained at initial TSL of 4.8%, and acidification was found at initial TSL of 6.0% with the lowest pH value of 5.10 on day 4. Co-digestion improved the methane yields by 4.42-58.61% via enhancing volatile fatty acids (VFAs) concentration and pH value compared with mono-digestion of corn stalk. The maximum biogas yield of 410.30 ± 11.01 mL/g TS added and methane yield of 259.35 ± 13.85 mL/g TS added were obtained for 40% VC addition. Structure analysis by X-ray diffractometry (XRD) showed that the lowest crystallinity of 35.04 of digested corn stalk was obtained from co-digestion with 40% VC, which decreased 29.4% compared to 49.6 obtained from un-treated corn stalk. It is concluded that co-digestion with VC is beneficial for improving biodigestibility and methane yield from corn stalk.

  20. Casein kinase II is required for the spindle assembly checkpoint by regulating Mad2p in fission yeast

    International Nuclear Information System (INIS)

    Shimada, Midori; Yamamoto, Ayumu; Murakami-Tonami, Yuko; Nakanishi, Makoto; Yoshida, Takashi; Aiba, Hirofumi; Murakami, Hiroshi

    2009-01-01

    The spindle checkpoint is a surveillance mechanism that ensures the fidelity of chromosome segregation in mitosis. Here we show that fission yeast casein kinase II (CK2) is required for this checkpoint function. In the CK2 mutants mitosis occurs in the presence of a spindle defect, and the spindle checkpoint protein Mad2p fails to localize to unattached kinetochores. The CK2 mutants are sensitive to the microtubule depolymerising drug thiabendazole, which is counteracted by ectopic expression of mad2 + . The level of Mad2p is low in the CK2 mutants. These results suggest that CK2 has a role in the spindle checkpoint by regulating Mad2p.

  1. Stalk-dependent and Stalk-independent Signaling by the Adhesion G Protein-coupled Receptors GPR56 (ADGRG1) and BAI1 (ADGRB1).

    Science.gov (United States)

    Kishore, Ayush; Purcell, Ryan H; Nassiri-Toosi, Zahra; Hall, Randy A

    2016-02-12

    The adhesion G protein-coupled receptors (aGPCRs) are a large yet poorly understood family of seven-transmembrane proteins. A defining characteristic of the aGPCR family is the conserved GAIN domain, which has autoproteolytic activity and can cleave the receptors near the first transmembrane domain. Several aGPCRs, including ADGRB1 (BAI1 or B1) and ADGRG1 (GPR56 or G1), have been found to exhibit significantly increased constitutive activity when truncated to mimic GAIN domain cleavage (ΔNT). Recent reports have suggested that the new N-terminal stalk, which is revealed by GAIN domain cleavage, can directly activate aGPCRs as a tethered agonist. We tested this hypothesis in studies on two distinct aGPCRs, B1 and G1, by engineering mutant receptors lacking the entire NT including the stalk (B1- and G1-SL, with "SL" indicating "stalkless"). These receptors were evaluated in a battery of signaling assays and compared with full-length wild-type and cleavage-mimicking (ΔNT) forms of the two receptors. We found that B1-SL, in multiple assays, exhibited robust signaling activity, suggesting that the membrane-proximal stalk region is not necessary for its activation. For G1, however, the results were mixed, with the SL mutant exhibiting robust activity in several signaling assays (including TGFα shedding, activation of NFAT luciferase, and β-arrestin recruitment) but reduced activity relative to ΔNT in a distinct assay (activation of SRF luciferase). These data support a model in which the activation of certain pathways downstream of aGPCRs is stalk-dependent, whereas signaling to other pathways is stalk-independent. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

  2. Solid-state fermentation from dried sweet sorghum stalk for bioethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Almodares, A.; Etemadifar, Z.; Omidi, A. [Univ. of Isfahan, Biology Dept., Univ. of Isfahan, Isfahan (Iran, Islamic Republic of)], e-mail: aalmodares@yahoo.com

    2012-11-01

    Due to depletion of global crude oil, countries are interested to alternate fuel energy resources. Presently bioethanol as a source of energy has been a subject of great interest for the industrialized countries. Therefore, there is need for efficient bioethanol production with low cost raw material and production process. Among energy crops, sweet sorghum is the best candidate for bioethanol production. It has been identified as having higher drought tolerance, lower input cost and higher biomass yield than other energy crops. In addition it has wide adoptability and tolerance to abiotic stresses. Moreover due to the shortage of water in dry and hot countries there is a need to reduce water requirement for bioethanol production and solid state fermentation could be the best process for making bioethanol in these countries. The purpose of this study is to achieve the highest ethanol production with lowest amount of water in solid state fermentation using sweet sorghum stalk. In this study the sweet sorghum particles were used for solid state fermentation. Fermentation medium were: sweet sorghum particles with nutrient media, active yeast powder and different moisture contents. The fermentation medium was incubated for 2-3 days at 30 deg C temperature. The results showed sweet sorghum particles (15% w/w) fermented in medium containing 0.5% yeast inoculums, 73.5% moisture content and 3 days incubation period produced the highest amount of ethanol (13% w/w sorghum)

  3. [Stalking: clinical and criminological considerations through the results of a research contribution].

    Science.gov (United States)

    Pomilla, Antonella; D'Argenio, Alberto; Mastronardi, Vincenzo

    2012-01-01

    Among the extensive results supplied by the psychiatric literature on the subject of stalking, few studies focus on the analysis of persecutory behaviors carried out against mental health professionals, who also identified as one of the most affected sample of victims. Particularly, for studies conducted in this way, further examination requires differentiation according to gender type into the social and personal characteristics of the authors' behavior patterns displayed towards the victims. Aim. To obtaine results by an epidemiological survey conducted in public and private psychiatric care structures in the city of Rome, to assess the incidence of the phenomenon as well as gender differences in behavior patterns practised out by the author for the two sample considered. Methods. Administration of a questionnaire to a sample make up by psychiatrists working in out-patient services for the Departments of Mental Health (ASL) of Rome and to a sample of psychiatrists who practise their professional activity in the private sector. Results. Regarding the incidence of the phenomenon, an increased presence has been found in private mental health care settings in comparison to the public service; regarding to the distribution of the phenomenon according to the sexual identity of the authors among the two samples analyzed, a statistical prevalence of female authors has been found in the sample of private sector. Discussion. The health's professionals, so much liable of victimization, are poorly formed on the phenomenon. So it's urgent to operate with integrated approaches (informative trainings; strengthening of administrative and clinical policies of the profession; multidimensional assessment).

  4. Electron Transport Chain Is Biochemically Linked to Pilus Assembly Required for Polymicrobial Interactions and Biofilm Formation in the Gram-Positive Actinobacterium Actinomyces oris

    Directory of Open Access Journals (Sweden)

    Belkys C. Sanchez

    2017-06-01

    Full Text Available The Gram-positive actinobacteria Actinomyces spp. are key colonizers in the development of oral biofilms due to the inherent ability of Actinomyces to adhere to receptor polysaccharides on the surface of oral streptococci and host cells. This receptor-dependent bacterial interaction, or coaggregation, requires a unique sortase-catalyzed pilus consisting of the pilus shaft FimA and the coaggregation factor CafA forming the pilus tip. While the essential role of the sortase machine SrtC2 in pilus assembly, biofilm formation, and coaggregation has been established, little is known about trans-acting factors contributing to these processes. We report here a large-scale Tn5 transposon screen for mutants defective in Actinomyces oris coaggregation with Streptococcus oralis. We obtained 33 independent clones, 13 of which completely failed to aggregate with S. oralis, and the remainder of which exhibited a range of phenotypes from severely to weakly defective coaggregation. The former had Tn5 insertions in fimA, cafA, or srtC2, as expected; the latter were mapped to genes coding for uncharacterized proteins and various nuo genes encoding the NADH dehydrogenase subunits. Electron microscopy and biochemical analyses of mutants with nonpolar deletions of nuo genes and ubiE, a menaquinone C-methyltransferase-encoding gene downstream of the nuo locus, confirmed the pilus and coaggregation defects. Both nuoA and ubiE mutants were defective in oxidation of MdbA, the major oxidoreductase required for oxidative folding of pilus proteins. Furthermore, supplementation of the ubiE mutant with exogenous menaquinone-4 rescued the cell growth and pilus defects. Altogether, we propose that the A. oris electron transport chain is biochemically linked to pilus assembly via oxidative protein folding.

  5. Casein kinase II is required for the spindle assembly checkpoint by regulating Mad2p in fission yeast

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Midori [Department of Biochemistry and Cell Biology, Graduate School of Medicine, Nagoya City University, 1 Kawasumi, Mizuho-cho, Mizuho-ku, Nagoya 467-8601 (Japan); Yamamoto, Ayumu [Department of Chemistry, Shizuoka University, 836 Ohya, Suruga-ku, Sizuoka 422-8529 (Japan); Murakami-Tonami, Yuko; Nakanishi, Makoto; Yoshida, Takashi [Department of Biochemistry and Cell Biology, Graduate School of Medicine, Nagoya City University, 1 Kawasumi, Mizuho-cho, Mizuho-ku, Nagoya 467-8601 (Japan); Aiba, Hirofumi [Laboratory of Molecular Microbiology, School of Agriculture, Nagoya University, Chikusa-ku, Nagoya 464-8601 (Japan); Murakami, Hiroshi, E-mail: hmura@med.nagoya-cu.ac.jp [Department of Biochemistry and Cell Biology, Graduate School of Medicine, Nagoya City University, 1 Kawasumi, Mizuho-cho, Mizuho-ku, Nagoya 467-8601 (Japan)

    2009-10-23

    The spindle checkpoint is a surveillance mechanism that ensures the fidelity of chromosome segregation in mitosis. Here we show that fission yeast casein kinase II (CK2) is required for this checkpoint function. In the CK2 mutants mitosis occurs in the presence of a spindle defect, and the spindle checkpoint protein Mad2p fails to localize to unattached kinetochores. The CK2 mutants are sensitive to the microtubule depolymerising drug thiabendazole, which is counteracted by ectopic expression of mad2{sup +}. The level of Mad2p is low in the CK2 mutants. These results suggest that CK2 has a role in the spindle checkpoint by regulating Mad2p.

  6. Fuel assembly storage pool

    International Nuclear Information System (INIS)

    Hiranuma, Hiroshi.

    1976-01-01

    Object: To remove limitation of the number of storage of fuel assemblies to increase the number of storage thereof so as to relatively reduce the water depth required for shielding radioactive rays. Structure: Fuel assembly storage rack containers for receiving a plurality of spent fuel assembly racks are stacked in multi-layer fashion within a storage pool filled with water for shielding radioactive rays and removing heat. (Furukawa, Y.)

  7. The conserved glycine residues in the transmembrane domain of the Semliki Forest virus fusion protein are not required for assembly and fusion

    International Nuclear Information System (INIS)

    Liao Maofu; Kielian, Margaret

    2005-01-01

    The alphavirus Semliki Forest virus (SFV) infects cells via a low pH-triggered fusion reaction mediated by the viral E1 protein. Both the E1 fusion peptide and transmembrane (TM) domain are essential for membrane fusion, but the functional requirements for the TM domain are poorly understood. Here we explored the role of the five TM domain glycine residues, including the highly conserved glycine pair at E1 residues 415/416. SFV mutants with alanine substitutions for individual or all five glycine residues (5G/A) showed growth kinetics and fusion pH dependence similar to those of wild-type SFV. Mutants with increasing substitution of glycine residues showed an increasingly more stringent requirement for cholesterol during fusion. The 5G/A mutant showed decreased fusion kinetics and extent in fluorescent lipid mixing assays. TM domain glycine residues thus are not required for efficient SFV fusion or assembly but can cause subtle effects on the properties of membrane fusion

  8. Thermal Stress Analysis for Ceramics Stalk in the Low Pressure Die Casting Machine

    Science.gov (United States)

    Noda, Nao-Aki; Hendra, Nao-Aki; Takase, Yasushi; Li, Wenbin

    Low pressure die casting (LPDC) is defined as a net shape casting technology in which the molten metal is injected at high speeds and pressure into a metallic die. The LPDC process is playing an increasingly important role in the foundry industry as a low-cost and high-efficiency precision forming technique. The LPDC process is that the permanent die and filling systems are placed over the furnace containing the molten alloy. The filling of the cavity is obtained by forcing the molten metal by means of a pressurized gas in order to rise into a ceramic tube, which connects the die to the furnace. The ceramics tube called stalk has high temperature resistance and high corrosion resistance. However, attention should be paid to the thermal stress when the stalk is dipped into the molten aluminum. It is important to develop the design of the stalk to reduce the risk of fracture because of low fracture toughness of ceramics. In this paper, therefore, the finite element method is applied to calculate the thermal stresses when the stalk is dipped into the crucible by varying the dipping speeds and dipping directions. It is found that the thermal stress can be reduced by dipping slowly if the stalk is dipped into the crucible vertically, while the thermal stress can be reduced by dipping fast if it is dipped horizontally.

  9. Mass transfer effect of the stalk contraction-relaxation cycle of Vorticella convallaria

    Science.gov (United States)

    Zhou, Jiazhong; Admiraal, David; Ryu, Sangjin

    2014-11-01

    Vorticella convallaria is a genus of protozoa living in freshwater. Its stalk contracts and coil pulling the cell body towards the substrate at a remarkable speed, and then relaxes to its extended state much more slowly than the contraction. However, the reason for Vorticella's stalk contraction is still unknown. It is presumed that water flow induced by the stalk contraction-relaxation cycle may augment mass transfer near the substrate. We investigated this hypothesis using an experimental model with particle tracking velocimetry and a computational fluid dynamics model. In both approaches, Vorticella was modeled as a solid sphere translating perpendicular to a solid surface in water. After having been validated by the experimental model and verified by grid convergence index test, the computational model simulated water flow during the cycle based on the measured time course of stalk length changes of Vorticella. Based on the simulated flow field, we calculated trajectories of particles near the model Vorticella, and then evaluated the mass transfer effect of Vorticella's stalk contraction based on the particles' motion. We acknowlege support from Laymann Seed Grant of the University of Nebraska-Lincoln.

  10. Cultural Models Shaping Stalking From a Content Analysis of Italian Newspapers

    Directory of Open Access Journals (Sweden)

    Andrea Caputo

    2013-08-01

    Full Text Available The increasing spread of stalking in recent years has captured the community’s and media’s interest and highlighted complex legal, clinical and cultural issues. This phenomenon, far from being an individual problem, can be considered as a product of a growing culture that seems to reveal the crisis of current rules of social coexistence. This work aims at detecting the cultural repertoires that organise the stalking discourse, from an analysis of Italian newspaper articles, within a socio-constructivist paradigm. Emotional text analysis was conducted on a corpus of headlines and subheadings derived from 496 articles. These articles were published in major national newspapers and helped to identify four cultural repertoires (clusters that characterise the social representation of stalking: gender violence and women’s social independence (Cluster 1, psychological violence and control as illusion of intimacy (Cluster 2, anomic violence and intolerant individualism (Cluster 3, domestic violence and women’s marital obligation (Cluster 4. These repertoires are conceived along three latent dimensions which respectively refer to the cultural functions of stalking (Factor 1, representations of the victim (Factor 2, and gender inequalities (Factor 3. The paper offers a key to a social contextualisation of stalking in Italy, in order to re-think work practices within institutional agencies that deal with this phenomenon.

  11. X-Ray Assembler Data

    Data.gov (United States)

    U.S. Department of Health & Human Services — Federal regulations require that an assembler who installs one or more certified components of a diagnostic x-ray system submit a report of assembly. This database...

  12. The special neuraminidase stalk-motif responsible for increased virulence and pathogenesis of H5N1 influenza A virus.

    Directory of Open Access Journals (Sweden)

    Hongbo Zhou

    Full Text Available The variation of highly pathogenic avian influenza H5N1 virus results in gradually increased virulence in poultry, and human cases continue to accumulate. The neuraminidase (NA stalk region of influenza virus varies considerably and may associate with its virulence. The NA stalk region of all N1 subtype influenza A viruses can be divided into six different stalk-motifs, H5N1/2004-like (NA-wt, WSN-like, H5N1/97-like, PR/8-like, H7N1/99-like and H5N1/96-like. The NA-wt is a special NA stalk-motif which was first observed in H5N1 influenza virus in 2000, with a 20-amino acid deletion in the 49(th to 68(th positions of the stalk region. Here we show that there is a gradual increase of the special NA stalk-motif in H5N1 isolates from 2000 to 2007, and notably, the special stalk-motif is observed in all 173 H5N1 human isolates from 2004 to 2007. The recombinant H5N1 virus with the special stalk-motif possesses the highest virulence and pathogenicity in chicken and mice, while the recombinant viruses with the other stalk-motifs display attenuated phenotype. This indicates that the special stalk-motif has contributed to the high virulence and pathogenicity of H5N1 isolates since 2000. The gradually increasing emergence of the special NA stalk-motif in H5N1 isolates, especially in human isolates, deserves attention by all.

  13. Measuring excess free energies of self-assembled membrane structures.

    Science.gov (United States)

    Norizoe, Yuki; Daoulas, Kostas Ch; Müller, Marcus

    2010-01-01

    Using computer simulation of a solvent-free, coarse-grained model for amphiphilic membranes, we study the excess free energy of hourglass-shaped connections (i.e., stalks) between two apposed bilayer membranes. In order to calculate the free energy by simulation in the canonical ensemble, we reversibly transfer two apposed bilayers into a configuration with a stalk in three steps. First, we gradually replace the intermolecular interactions by an external, ordering field. The latter is chosen such that the structure of the non-interacting system in this field closely resembles the structure of the original, interacting system in the absence of the external field. The absence of structural changes along this path suggests that it is reversible; a fact which is confirmed by expanded-ensemble simulations. Second, the external, ordering field is changed as to transform the non-interacting system from the apposed bilayer structure to two-bilayers connected by a stalk. The final external field is chosen such that the structure of the non-interacting system resembles the structure of the stalk in the interacting system without a field. On the third branch of the transformation path, we reversibly replace the external, ordering field by non-bonded interactions. Using expanded-ensemble techniques, the free energy change along this reversible path can be obtained with an accuracy of 10(-3)k(B)T per molecule in the n VT-ensemble. Calculating the chemical potential, we obtain the free energy of a stalk in the grandcanonical ensemble, and employing semi-grandcanonical techniques, we calculate the change of the excess free energy upon altering the molecular architecture. This computational strategy can be applied to compute the free energy of self-assembled phases in lipid and copolymer systems, and the excess free energy of defects or interfaces.

  14. Magnetic resonance imaging of thickened pituitary stalk proceeding to langerhans cell histiocytosis in a child

    International Nuclear Information System (INIS)

    Halefoglu, A.M.

    2006-01-01

    Magnetic resonance imaging has shown isolated pituitary stalk thickening in certain cases of idiopathic or secondary central diabetes insipidus (Dl) due to infiltrative processes. We present a 4-year-old boy who was initially diagnosed as having central Dl. The MRI showed isolated pituitary stalk thickening with prominent homogeneous contrast enhancement. The remaining findings on MRI were within normal limits. The patient's personal and family history and laboratory and clinical findings were unremarkable; therefore, he was initially diagnosed as having idiopathic Dl. Since central Dl and isolated pituitary stalk thickening may be considered to be the first manifestations of Langerhans cell histiocytosis, we decided to follow up the patient. After 5 months, following the initial diagnosis, on skeletal X-ray survey, the patient did indeed develop multiple lytic skull lesions which, on biopsy, were histologically typical bone lesions of Langerhans cell histiocytosis. Copyright (2006) Blackwell Science Pty Ltd

  15. Short-term Lost Productivity per Victim: Intimate Partner Violence, Sexual Violence, or Stalking.

    Science.gov (United States)

    Peterson, Cora; Liu, Yang; Kresnow, Marcie-Jo; Florence, Curtis; Merrick, Melissa T; DeGue, Sarah; Lokey, Colby N

    2018-05-15

    The purpose of this study is to estimate victims' lifetime short-term lost productivity because of intimate partner violence, sexual violence, or stalking. U.S. nationally representative data from the 2012 National Intimate Partner and Sexual Violence Survey were used to estimate a regression-adjusted average per victim (female and male) and total population number of cumulative short-term lost work and school days (or lost productivity) because of victimizations over victims' lifetimes. Victims' lost productivity was valued using a U.S. daily production estimate. Analysis was conducted in 2017. Non-institutionalized adults with some lifetime exposure to intimate partner violence, sexual violence, or stalking (n=6,718 respondents; survey-weighted n=130,795,789) reported nearly 741 million lost productive days because of victimizations by an average of 2.5 perpetrators per victim. The adjusted per victim average was 4.9 (95% CI=3.9, 5.9) days, controlling for victim, perpetrator, and violence type factors. The estimated societal cost of this short-term lost productivity was $730 per victim, or $110 billion across the lifetimes of all victims (2016 USD). Factors associated with victims having a higher number of lost days included a higher number of perpetrators and being female, as well as sexual violence, physical violence, or stalking victimization by an intimate partner perpetrator, stalking victimization by an acquaintance perpetrator, and sexual violence or stalking victimization by a family member perpetrator. Short-term lost productivity represents a minimum economic valuation of the immediate negative effects of intimate partner violence, sexual violence, and stalking. Victims' lost productivity affects family members, colleagues, and employers. Published by Elsevier Inc.

  16. The effect of Cerasus avium stalk extract on albumin glycation reaction

    Directory of Open Access Journals (Sweden)

    Mohadeseh Abdoli

    2014-10-01

    Full Text Available Background: Non-enzymatic glycosylation of proteins is the major cause of diabetic complications. The inhibition of glycation process can reduce complications of diabetes. In the Iranian traditional medicine, the decoction (boiled extraction of Cerasus avium stalk is used as a hypoglycemic agent. The aim of this study was to investigate the in vitro inhibitory effects of decoction and ethanolic and aqueous extracts of Cerasus avium stalk on albumin glycation reaction. Methods: In this experimental study, first, the ethanolic, aqueous and decoction extracts of Cerasus avium stalk were prepared. Then, different concentrations of these extracts were prepared and added to albumin and glucose solutions. Finally, compared to control group that was not treated with any extracts, the albumin glycation rate in the groups treated with various concentrations of extracts was evaluated using TBA (thio-barbituric acid method. Results: The results showed that compared to control group, decoction of Cerasus avium stalk in the concentrations of 20, 10 and 2 mg/dl could reduce albumin glycation to 85.10±1.55, 72.35±1.75 and 51.25±1.22 %, respectively (P>0.001. Moreover, in the concentration of 20 mg/dl, the inhibitory effect of decoction of Cerasus avium stalk on the albumin glycation reaction was higher than those of aqueous (P=0.021 and ethanolic (P=0.009 extracts. Conclusion: The findings showed that the extracs of Cerasus avium stalk, in particular in the decoction form, could significantly reduce the rate of albumin glycation; therefore, it can be used for decreasing diabetes mellitus complications.

  17. Ecological and physiological aspects of aestivation-diapause in the larvae of two Pyralid stalk borers of maize in Kenya

    NARCIS (Netherlands)

    Scheltes, P.

    1978-01-01

    Stalk borers are highly destructive to a large number of important graminaceous crops all over the world. Some examples of economically important stalk borers and a general description of their life-cycle are mentioned in chapter 1. In the same chapter difficulties in controlling the insects are

  18. Entre les violences conjugales et le harcèlement moral : le stalking .

    Directory of Open Access Journals (Sweden)

    Nicolas Desurmont

    2007-09-01

    Full Text Available Ce livre de la criminologue Murielle Anteo est le premier publié en langue française sur le stalking si l’on excepte les travaux encore inédits de Virginie Léon (2004. Comme le rappelle l’auteure, le terme est emprunté à l’anglais to stalk (hanter, rôder, et désigne un comportement menaçant, initié par un individu dont l’objectif conscient ou inconscient est l’objectivation de sa victime à des fins de domination. L’agression prend différentes formes : ...

  19. Body stalk anomaly in Denmark during 20 years (1970-1989)

    DEFF Research Database (Denmark)

    Bugge, Merete

    2012-01-01

    Body stalk anomaly is a severe defect of the abdominal wall with uncovered thoracic and/or abdominal organs. The umbilical cord is absent or very short. Here I present epidemiological and clinical data on 16 infants with body stalk anomaly. The 16 infants represent 3.4% of the 469 infants...... ascertained in an almost complete nationwide data set of live- and stillborn infants born with abdominal wall defects during the two decades 1970-1989 in Denmark. The prevalence was 0.12 per 10,000 live- and stillborn. Nine of the infants were stillbirths, seven were live births, and they all died shortly...

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Wataumi, Kazutoshi; Tajiri, Hiroshi.

    1992-01-01

    In a fuel assembly of a BWR type reactor, a pellet to be loaded comprises an external layer of fissile materials containing burnable poisons and an internal layer of fissile materials not containing burnable poison. For example, there is provided a dual type pellet comprising an external layer made of UO 2 incorporated with Gd 2 O 3 at a predetermined concentration as the burnable poisons and an internal layer made of UO 2 not containing Gd 2 O 3 . The amount of the burnable poisons required for predetermined places is controlled by the thickness of the ring of the external layer. This can dissipate an unnecessary poisoning effect at the final stage of the combustion cycle. Further, since only one or a few kinds of powder mixture of the burnable poisons and the fissile materials is necessary, production and product control can be facilitated. (I.N.)

  1. Preparation of nitrogen-doped cotton stalk microporous activated carbon fiber electrodes with different surface area from hexamethylenetetramine-modified cotton stalk for electrochemical degradation of methylene blue

    Directory of Open Access Journals (Sweden)

    Kunquan Li

    Full Text Available Cotton-stalk activated carbon fibers (CSCFs with controllable micropore area and nitrogen content were prepared as an efficient electrode from hexamethylenetetramine-modified cotton stalk by steam/ammonia activation. The influence of microporous area, nitrogen content, voltage and initial concentration on the electrical degradation efficiency of methylene blue (MB was evaluated by using CSCFs as anode. Results showed that the CSCF electrodes exhibited excellent MB electrochemical degradation ability including decolorization and COD removal. Increasing micropore surface area and nitrogen content of CSCF anode leaded to a corresponding increase in MB removal. The prepared CSCF-800-15-N, which has highest N content but lowest microporous area, attained the best degradation effect with 97% MB decolorization ratio for 5 mg/L MB at 12 V in 4 h, implying the doped nitrogen played a prominent role in improving the electrochemical degradation ability. The electrical degradation reaction was well described by first-order kinetics model. Overall, the aforesaid findings suggested that the nitrogen-doped CSCFs were potential electrode materials, and their electrical degradation abilities could be effectively enhanced by controlling the nitrogen content and micropore surface area. Keywords: Cotton stalk, Nitrogen content, Electrode, Surface area, Methylene blue

  2. Bacteriophage Assembly

    Directory of Open Access Journals (Sweden)

    Anastasia A. Aksyuk

    2011-02-01

    Full Text Available Bacteriophages have been a model system to study assembly processes for over half a century. Formation of infectious phage particles involves specific protein-protein and protein-nucleic acid interactions, as well as large conformational changes of assembly precursors. The sequence and molecular mechanisms of phage assembly have been elucidated by a variety of methods. Differences and similarities of assembly processes in several different groups of bacteriophages are discussed in this review. The general principles of phage assembly are applicable to many macromolecular complexes.

  3. Fuel assemblies

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi.

    1979-01-01

    Purpose: To prevent scattering of gaseous fission products released from fuel assemblies stored in an fbr type reactor. Constitution; A cap provided with means capable of storing gas is adapted to amount to the assembly handling head, for example, by way of threading in a storage rack of spent fuel assemblies consisting of a bottom plate, a top plate and an assembly support mechanism. By previously eliminating the gas inside of the assembly and the cap in the storage rack, gaseous fission products upon loading, if released from fuel rods during storage, are stored in the cap and do not scatter in the storage rack. (Horiuchi, T.)

  4. Sequence assembly

    DEFF Research Database (Denmark)

    Scheibye-Alsing, Karsten; Hoffmann, S.; Frankel, Annett Maria

    2009-01-01

    Despite the rapidly increasing number of sequenced and re-sequenced genomes, many issues regarding the computational assembly of large-scale sequencing data have remain unresolved. Computational assembly is crucial in large genome projects as well for the evolving high-throughput technologies and...... in genomic DNA, highly expressed genes and alternative transcripts in EST sequences. We summarize existing comparisons of different assemblers and provide a detailed descriptions and directions for download of assembly programs at: http://genome.ku.dk/resources/assembly/methods.html....

  5. Assembling large, complex environmental metagenomes

    Energy Technology Data Exchange (ETDEWEB)

    Howe, A. C. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Jansson, J. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Sciences Division; Malfatti, S. A. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tringe, S. G. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Tiedje, J. M. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Plant Soil and Microbial Sciences; Brown, C. T. [Michigan State Univ., East Lansing, MI (United States). Microbiology and Molecular Genetics, Computer Science and Engineering

    2012-12-28

    The large volumes of sequencing data required to sample complex environments deeply pose new challenges to sequence analysis approaches. De novo metagenomic assembly effectively reduces the total amount of data to be analyzed but requires significant computational resources. We apply two pre-assembly filtering approaches, digital normalization and partitioning, to make large metagenome assemblies more computationaly tractable. Using a human gut mock community dataset, we demonstrate that these methods result in assemblies nearly identical to assemblies from unprocessed data. We then assemble two large soil metagenomes from matched Iowa corn and native prairie soils. The predicted functional content and phylogenetic origin of the assembled contigs indicate significant taxonomic differences despite similar function. The assembly strategies presented are generic and can be extended to any metagenome; full source code is freely available under a BSD license.

  6. Dgp71WD is required for the assembly of the acentrosomal Meiosis I spindle, and is not a general targeting factor for the γ-TuRC

    Directory of Open Access Journals (Sweden)

    Richard F. Reschen

    2012-03-01

    Dgp71WD/Nedd1 proteins are essential for mitotic spindle formation. In human cells, Nedd1 targets γ-tubulin to both centrosomes and spindles, but in other organisms the function of Dgp71WD/Nedd1 is less clear. In Drosophila cells, Dgp71WD plays a major part in targeting γ-tubulin to spindles, but not centrosomes, while in Xenopus egg extracts, Nedd1 acts as a more general microtubule (MT organiser that can function independently of γ-tubulin. The interpretation of these studies, however, is complicated by the fact that some residual Dgp71WD/Nedd1 is likely present in the cells/extracts analysed. Here we generate a Dgp71WD null mutant lacking all but the last 12 nucleotides of coding sequence. The complete loss of Dgp71WD has no quantifiable effect on γ-tubulin or Centrosomin recruitment to the centrosome in larval brain cells. The recruitment of γ-tubulin to spindle MTs, however, is severely impaired, and spindle MT density is reduced in a manner that is indistinguishable from cells lacking Augmin or γ-TuRC function. In contrast, the absence of Dgp71WD leads to defects in the assembly of the acentrosomal female Meiosis I spindle that are more severe than those seen in Augmin or γ-TuRC mutants, indicating that Dgp71WD has additional functions that are independent of these complexes in oocytes. Moreover, the localisation of bicoid RNA during oogenesis, which requires γ-TuRC function, is unperturbed in Dgp71WD120 mutants. Thus, Dgp71WD is not simply a general cofactor required for γ-TuRC and/or Augmin targeting, and it appears to have a crucial role independent of these complexes in the acentrosomal Meiosis I spindle.

  7. A comparison of soda and soda-AQ pulps from cotton stalks

    African Journals Online (AJOL)

    STORAGESEVER

    2009-11-16

    Nov 16, 2009 ... Duzce University, Faculty of Forestry, Konuralp Campus, 81620 Düzce, Turkey. ... two in Latin America and three in Africa and Middle East. (Casey, 1990). ... After that the cotton stalks were dried in the laboratory atmosphere, ...

  8. Thermal Stress and Heat Transfer Coefficient for Ceramics Stalk Having Protuberance Dipping into Molten Metal

    Science.gov (United States)

    Noda, Nao-Aki; Hendra; Li, Wenbin; Takase, Yasushi; Ogura, Hiroki; Higashi, Yusuke

    Low pressure die casting is defined as a net shape casting technology in which the molten metal is injected at high speeds and pressure into a metallic die. The low pressure die casting process plays an increasingly important role in the foundry industry as a low-cost and high-efficiency precision forming technique. In the low pressure die casting process is that the permanent die and filling systems are placed over the furnace containing the molten alloy. The filling of the cavity is obtained by forcing the molten metal, by means of a pressurized gas, to rise into a ceramic tube having protuberance, which connects the die to the furnace. The ceramics tube, called stalk, has high temperature resistance and high corrosion resistance. However, attention should be paid to the thermal stress when the stalk having protuberance is dipped into the molten aluminum. It is important to reduce the risk of fracture that may happen due to the thermal stresses. In this paper, thermo-fluid analysis is performed to calculate surface heat transfer coefficient. The finite element method is applied to calculate the thermal stresses when the stalk having protuberance is dipped into the crucible with varying dipping speeds. It is found that the stalk with or without protuberance should be dipped into the crucible slowly to reduce the thermal stress.

  9. Gene duplication, tissue-specific gene expression and sexual conflict in stalk-eyed flies (Diopsidae).

    Science.gov (United States)

    Baker, Richard H; Narechania, Apurva; Johns, Philip M; Wilkinson, Gerald S

    2012-08-19

    Gene duplication provides an essential source of novel genetic material to facilitate rapid morphological evolution. Traits involved in reproduction and sexual dimorphism represent some of the fastest evolving traits in nature, and gene duplication is intricately involved in the origin and evolution of these traits. Here, we review genomic research on stalk-eyed flies (Diopsidae) that has been used to examine the extent of gene duplication and its role in the genetic architecture of sexual dimorphism. Stalk-eyed flies are remarkable because of the elongation of the head into long stalks, with the eyes and antenna laterally displaced at the ends of these stalks. Many species are strongly sexually dimorphic for eyespan, and these flies have become a model system for studying sexual selection. Using both expressed sequence tag and next-generation sequencing, we have established an extensive database of gene expression in the developing eye-antennal imaginal disc, the adult head and testes. Duplicated genes exhibit narrower expression patterns than non-duplicated genes, and the testes, in particular, provide an abundant source of gene duplication. Within somatic tissue, duplicated genes are more likely to be differentially expressed between the sexes, suggesting gene duplication may provide a mechanism for resolving sexual conflict.

  10. A rare cause of hyperprolactinemia: persistent trigeminal artery with stalk-section effect

    International Nuclear Information System (INIS)

    Ekinci, G.; Baltacioglu, F.; Cimsit, C.; Akpinar, I.; Erzen, C.; Kilic, T.; Pamir, N.

    2001-01-01

    The primitive trigeminal, otic, hypoglossal, and proatlantal intersegmental arteries are fetal anastomoses between the carotid and vertebrobasilar systems. Persistent trigeminal artery (PTA) is the most frequent embryonic communication between the vertebrobasilar and carotid systems in adults. We report a case of PTA compressing the left side of the pituitary gland and stalk, in a patient with elevated blood prolactin level. (orig.)

  11. Synergistic effect on co-pyrolysis of capsicum stalks and coal | Niu ...

    African Journals Online (AJOL)

    With the depletion of fossil fuel and the concern about environmental issues, the utilization of biomass resources has attracted increasing worldwide interest. The pyrolysis behavior of capsicum stalks and Baoji coal mixtures was investigated by TG-DSC. Results show that the thermal degradation temperature range of ...

  12. Biochemical response and host-pathogen relation of stalk rot fungi ...

    African Journals Online (AJOL)

    Stalk rot is a destructive disease in maize caused by Fusarium and Macrophomina species. A study was carried out to understand the mode of infection, host biochemical response and comparison of inoculation techniques in Fusarium verticillioides and Macrophomina phaseolina in maize. In seed inoculation experiment, ...

  13. Transection of the pituitary stalk: evaluation of two cases by computerized tomography and magnetic resonance

    International Nuclear Information System (INIS)

    Amaral, L.L.F. do; Mendonca, R.A.; Natal, M.R.C.

    1992-01-01

    The authors present two cases of pituitary dwarfism where the study by high resolution computed tomography and by magnetic resonance imaging show transection of the pituitary stalk as the cause of the endocrine disturb. The importance of these methods on the investigation of disturbs of the hypothalamus-hypophyseal axis is stressed. (author)

  14. A study on the chopping and mixing of cotton stalks with soil

    African Journals Online (AJOL)

    USER

    2010-07-26

    Jul 26, 2010 ... INTRODUCTION ... porating plant residues into soil reduces the risk of soil ... stalks into soil increases the productivity of the field. ... producers were asked about the total area of their agricultural fields .... are made of forged steel in one piece. ... maintenance works such as thinning, weeding and irrigation.

  15. Status of maize stalk rot complex in western belts of Nepal and its integrated management

    Directory of Open Access Journals (Sweden)

    Subash Subedi

    2016-12-01

    Full Text Available Maize stalk rot complex is becoming a serious threat for maize growing areas of Nepal. A field monitoring for maize stalk rot complex was done during crop season (August, 2016 covering 10 farmers field each of Surkhet, Banke, Dang, Chitwan and Nawalparasi districts. Maize crop showed highly susceptible reaction to the disease at western belts of Dang and susceptible reaction was marked in Chitwan and Nawalparasi districts while the disease effect was mild at Banke and Surkhet district. Most of the plant diseases managed successfully through the application of bio-control agents, host resistance, chemicals and other different cultural control methods. The result of field experiment conducted at Dang showed that all the treatments had significant (P≤0.05 effect on percent disease index (PDI and crop yield over farmers practice to control maize stalk rot. The higher percent disease control (52.36% and yield increase (40.29% were recorded from the plot sprayed with streptocyclin @ 2 g L-1 and insecticide (cypermethrin + chloropyrifos @ 2.5 ml L-1 of water during knee height and subsequent spray after 15 days interval as compared to farmers practice. Out of 30 genotypes, Rampur composit, Arun 2, Rampur 34, RamS03F08, TLBRS07F16 and Rampur 24 were found resistant against stalk rot complex with higher yield at Rampur Chitwan.

  16. Continuous ethanol production using yeast immobilized on sugar-cane stalks

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, J.N. de [Alagoas Univ., Maceio, AL (Brazil). Dept. de Engenharia Quimica]. E-mail: jnunes@ctec.ufal.br; Lopes, C.E. [Pernambuco Univ., Recife, PE (Brazil). Dept. de Antibioticos; Franca, F.P. de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Bioquimica

    2004-09-01

    Sugar-cane stalks, 2.0 cm long, were used as a support for yeast immobilization envisaging ethanol production. The assays were conducted in 38.5 L fermenters containing a bed of stalks with 50% porosity. The operational stability of the immobilized yeast, the efficiency and stability of the process, as well as the best dilution rate were evaluated. Molasses from demerara sugar production was used in the medium formulation. It was diluted to obtain 111.75 {+-} 1.51 g/L without any further treatment. Sulfuric acid was used to adjust the pH value to around 4.2. Every two days Kamoran HJ (10 ppm) or with a mixture containing penicillin (10 ppm) and tetracycline (10 ppm), was added to the medium. Ethanol yield and efficiency were 29.64 g/L.h and 86.40%, respectively, and the total reducing sugars conversion was 74.61% at a dilution rate of 0.83 h{sup -1}. The yeast-stalk system was shown to be stable for over a 60 day period at extremely variable dilution rates ranging from 0.05 h{sup -1} to 3.00 h{sup -1}. The concentration of immobilized cell reached around 109 cells/gram of dry sugar-cane stalk when the fermenter was operating at the highest dilution rate (3.00 h{sup -1}). (author)

  17. Effects of fistular onion stalk extract on the level of NO and ...

    African Journals Online (AJOL)

    user

    2011-03-28

    Mar 28, 2011 ... In this study, we investigated the effects of fistular onion stalk extracts on nitric oxide ... and flavonoids in onion (Knekt et al., 1996). ... cells lie between blood flow and smooth muscle cells. ... strated by a reduction in the blood vessel dilation factors .... raw onion inhibits platelet-mediated thrombosis in dogs.

  18. Wet Oxidation Pretreatment of Tobacco Stalks and Orange Waste for Bioethanol Production. Preliminary results

    DEFF Research Database (Denmark)

    Martin, Carlos; Fernandez, Teresa; Garcia, Ariel

    2009-01-01

    Wet oxidation (WO) was used as a pretreatment method prior to enzymatic hydrolysis of tobacco stalks and orange waste. The pretreatment, performed at 195 degrees C and an oxygen pressure of 1.2 MPa, for 15 min, in the presence of Na2CO3, increased the cellulose content of the materials and gave c...

  19. Organics and mineral fertilizers and biological control on the incidence of stalk rot and corn yield

    Directory of Open Access Journals (Sweden)

    Elena Blume

    2014-06-01

    Full Text Available The expansion of area under maize (Zea mays L. and the use of no tillage have favored the incidence of stalk rot on this crop. The study aimed to evaluate the organic fertilizers and the treatment of corn seeds with Trichoderma spp. on the production of dry matter (DM of shoot, incidence of stalk rot and corn yield. The experiment consisted in a factorial with split-plot in strips, on the randomized block design with four replicates, and the fertilization treatments (pig slurry; swine deep bedding; cattle slurry; mineral fertilizer; control treatment were applied to the plots and the seeds treatment (with and without Trichoderma spp. in the subplots. At the flowering stage, three corn plants per subplot were collected for the assessment of DM production. At physiological maturity stage, the incidence of stalk rot was assessed, and the ears of corn harvested for productivity assessment. The organic and mineral fertilizers increased the production of DM and productivity of corn. Trichoderma spp. increased the production of DM of corn, but had no reflection on productivity. The incidence of stalk rot in corn was higher in treatments with organic and mineral fertilization. Organic fertilizers increase dry matter production of shoot and corn yield, and Trichoderma spp. provides an increase in dry matter production of shoot.

  20. Carbohydrate Status of Tulip Bulbs during Cold-Induced Flower Stalk Elongation and Flowering.

    Science.gov (United States)

    Lambrechts, H.; Rook, F.; Kolloffel, C.

    1994-01-01

    The effect of a cold treatment on the carbohydrate status of the scales and flower stalk of Tulipa gesneriana L. cv Apeldoorn bulbs during growth after planting was studied and compared with bulbs not given cold treatment. Bulbs were stored dry for 12 weeks at 5[deg]C (precooled) or 17[deg]C (noncooled). Only the 5[deg]C treatment led to rapid flower stalk elongation and flowering following planting at higher temperatures. Precooling enhanced mobilization of starch, fructans, and sucrose in the scales. The cold-stimulated starch breakdown was initially accompanied by increased [alpha]-amylase activity per scale. In noncooled bulbs, [alpha]-amylase activity slightly decreased or remained more or less constant. Cold-induced flower stalk elongation was partially accompanied by a decrease in the sucrose content and an increase in the glucose content and invertase activity per g dry weight. The starch content in internodes initially decreased and subsequently increased; [alpha]-amylase activity per g dry weight of the lowermost internode showed a peak pattern during starch breakdown and increased thereafter. The internodes of noncooled bulbs, on the contrary, accumulated sucrose. Their glucose content and invertase activity per g dry weight remained low. Starch breakdown was not found and [alpha]-amylase activity per g dry weight of the lowermost internode remained at a low level. Precooling of tulip bulbs thus favors reserve mobilization in the scales and flower stalk and glucose accumulation in the elongating internodes. PMID:12232100

  1. Fuel Assembly Damping Summary

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kanghee; Kang, Heungseok; Oh, Dongseok; Yoon, Kyungho; Kim, Hyungkyu; Kim, Jaeyong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper summary the fuel assembly damping data in air/in still water/under flow, released from foreign fuel vendors, compared our data with the published data. Some technical issues in fuel assembly damping measurement testing are also briefly discussed. Understanding of each fuel assembly damping mechanisms according to the surrounding medium and flow velocity can support the fuel design improvement in fuel assembly dynamics and structural integrity aspect. Because the upgraded requirements of the newly-developed advanced reactor system will demands to minimize fuel design margin in integrity evaluation, reduction in conservatism of fuel assembly damping can contribute to alleviate the fuel design margin for sure. Damping is an energy dissipation mechanism in a vibrating mechanical structure and prevents a resonant structure from having infinite vibration amplitudes. The sources of fuel assembly damping are various from support friction to flow contribution, and it can be increased by the viscosity or drag of surrounding fluid medium or the average velocity of water flowing. Fuel licensing requires fuel design evaluation in transient or accidental condition. Dynamic response analysis of fuel assembly is to show fuel integrity and requires information on assembly-wise damping in dry condition and under wet or water flowing condition. However, damping measurement test for the full-scale fuel assembly prototype is not easy to carry out because of the scale (fuel prototype, test facility), unsteadiness of test data (scattering, random sampling and processing), instrumentation under water flowing (water-proof response measurement), and noise. LWR fuel technology division in KAERI is preparing the infra structure for damping measurement test of full-scale fuel assembly, to support fuel industries and related research activities. Here is a preliminary summary of fuel assembly damping, published in the literature. Some technical issues in fuel assembly damping

  2. Colchicine affects cell motility, pattern formation and stalk cell differentiation in Dictyostelium by altering calcium signaling.

    Science.gov (United States)

    Poloz, Yekaterina; O'Day, Danton H

    2012-04-01

    Previous work, verified here, showed that colchicine affects Dictyostelium pattern formation, disrupts morphogenesis, inhibits spore differentiation and induces terminal stalk cell differentiation. Here we show that colchicine specifically induces ecmB expression and enhances accumulation of ecmB-expressing cells at the posterior end of multicellular structures. Colchicine did not induce a nuclear translocation of DimB, a DIF-1 responsive transcription factor in vitro. It also induced terminal stalk cell differentiation in a mutant strain that does not produce DIF-1 (dmtA-) and after the treatment of cells with DIF-1 synthesis inhibitor cerulenin (100 μM). This suggests that colchicine induces the differentiation of ecmB-expressing cells independent of DIF-1 production and likely through a signaling pathway that is distinct from the one that is utilized by DIF-1. Depending on concentration, colchicine enhanced random cell motility, but not chemotaxis, by 3-5 fold (10-50 mM colchicine, respectively) through a Ca(2+)-mediated signaling pathway involving phospholipase C, calmodulin and heterotrimeric G proteins. Colchicine's effects were not due to microtubule depolymerization as other microtubule-depolymerizing agents did not have these effects. Finally normal morphogenesis and stalk and spore cell differentiation of cells treated with 10 mM colchicine were rescued through chelation of Ca2+ by BAPTA-AM and EDTA and calmodulin antagonism by W-7 but not PLC inhibition by U-73122. Morphogenesis or spore cell differentiation of cells treated with 50 mM colchicine could not be rescued by the above treatments but terminal stalk cell differentiation was inhibited by BAPTA-AM, EDTA and W-7, but not U-73122. Thus colchicine disrupts morphogenesis and induces stalk cell differentiation through a Ca(2+)-mediated signaling pathway involving specific changes in gene expression and cell motility. Copyright © 2011 International Society of Differentiation. Published by Elsevier B

  3. Growth of wheat and lettuce and enzyme activities of soils under garlic stalk decomposition for different durations.

    Science.gov (United States)

    Han, Xu; Cheng, Zhihui; Meng, Huanwen

    2017-07-01

    Garlic (Allium sativum L.) stalk is a byproduct of garlic production that is normally thought of as waste but is now considered a useful biological resource. It is necessary to utilize this resource efficiently and reasonably to reduce environmental pollution and achieve sustainable agricultural development. The effect of garlic stalk decomposed for different durations was investigated in this study using wheat (Triticum aestivum L.) and lettuce (Lactuca sativa var. crispa L.) as test plants. Garlic stalk in early stages of decomposition inhibited the shoot and root lengths of wheat and lettuce, but it promoted the shoot and root lengths in later stages; longer durations of garlic stalk decomposition significantly increased the shoot and root fresh weights of wheat and lettuce, whereas shorter decomposing durations significantly decreased the shoot and root fresh weights; and garlic stalk at different decomposition durations increased the activities of urease, sucrase and alkaline phosphatase in soil where wheat or lettuce was planted. Garlic stalk decomposed for 30 or 40 days could promote the growth of wheat and lettuce plants as well as soil enzyme activities. These results may provide a scientific basis for the study and application of garlic stalk. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  4. [Effects of cotton stalk biochar on microbial community structure and function of continuous cropping cotton rhizosphere soil in Xinjiang, China].

    Science.gov (United States)

    Gu, Mei-ying; Tang, Guang-mu; Liu, Hong-liang; Li, Zhi-qiang; Liu, Xiao-wei; Xu, Wan-li

    2016-01-01

    In this study, field trials were conducted to examine the effects of cotton stalk biochar on microbial population, function and structural diversity of microorganisms in rhizosphere soil of continuous cotton cropping field in Xinjiang by plate count, Biolog and DGGE methods. The experiment was a factorial design with four treatments: 1) normal fertilization with cotton stalk removed (NPK); 2) normal fertilization with cotton stalk powdered and returned to field (NPKS); 3) normal fertilization plus cotton stalk biochar at 22.50 t · hm⁻² (NPKB₁); and 4) normal fertilization plus cotton stalk biochar at 45.00 t · hm⁻² (NPKB₂). The results showed that cotton stalk biochar application obviously increased the numbers of bacteria and actinomycetes in the rhizospheric soil. Compared with NPK treatment, the number of fungi was significantly increased in the NPKB₁treatment, but not in the NPKB₂ treatment. However, the number of fungi was generally lower in the biochar amended (NPKB₁, NPKB₂) than in the cotton stalk applied plots (NPKS). Application of cotton stalk biochar increased values of AWCD, and significantly improved microbial richness index, suggesting that the microbial ability of utilizing carbohydrates, amino acids and carboxylic acids, especially phenolic acids was enhanced. The number of DGGE bands of NPKB₂ treatment was the greatest, with some species of Gemmatimonadetes, Acidobacteria, Proteobacteria and Actinobacteria being enriched. UPGMC Cluster analysis pointed out that bacterial communities in the rhizospheric soil of NPKB₂ treatment were different from those in the NPK, NPKS and NPKB₁treatments, which belonged to the same cluster. These results indicated that application of cotton stalk biochar could significantly increase microbial diversity and change soil bacterial community structure in the cotton rhizosphere soil, thus improving the health of soil ecosystem.

  5. ENVIRONMENTAL CONTROL OF STALK LENGTH IN THE BLOOM-FORMING, FRESHWATER BENTHIC DIATOM DIDYMOSPHENIA GEMINATA (BACILLARIOPHYCEAE)(1).

    Science.gov (United States)

    Kilroy, Cathy; Bothwell, Max

    2011-10-01

    Blooms of the freshwater stalked diatom Didymosphenia geminata (Lyngb.) M. Schmidt in A. Schmidt typically occur in oligotrophic, unshaded streams and rivers. Observations that proliferations comprise primarily stalk material composed of extracellular polymeric substances (EPS) led us to ask whether or not the production of excessive EPS is favored under nutrient-limited, high-light conditions. We conducted experiments in outdoor flumes colonized by D. geminata using water from the oligotrophic, D. geminata-affected Waitaki River, South Island, New Zealand, to determine the relationship between D. geminata stalk length, cell division rates, and light intensity under ambient and nutrient-enriched conditions. Stalk lengths were measured in situ, and cell division rates were estimated as the frequency of dividing cells (FDC). FDC responded positively to increasing light intensity and to nutrient additions (N+P and P). Under ambient conditions, stalk length increased as light level increased except at low ambient light levels and temperature. Nutrient enrichment resulted in decreased stalk length and negative correlations with FDC, with this effect most evident under high light. Our results are consistent with the hypothesis that extensive stalk production in D. geminata occurs when cell division rates are nutrient limited and light levels are high. Thus, photosynthetically driven EPS production in the form of stalks, under nutrient-limited conditions, may explain the development of very high biomass in this species in oligotrophic rivers. The responses of FDC and stalk length under nutrient-replete conditions are also consistent with occurrences of D. geminata as a nondominant component of mixed periphyton communities in high-nutrient streams. © 2011 Phycological Society of America.

  6. Required Equipment for Photo-Switchable Donor-Acceptor (D-A) Dyad Interfacial Self-Assembled Monolayers for Organic Photovoltaic Cells

    Science.gov (United States)

    2014-01-24

    Interfacial Tuning via Electron-Blocking/Hole-Transport Layers and Indium Tin Oxide Surface Treatment in Bulk- Heterojunction Organic Photovoltaic Cells...devices Figure 3 shows the compounds we prepared to assemble on gold (Au) surfaces. Results of TPA-C60 dyads (1 and 2) self-assembled on Au electrodes...surface hydroxyl groups, respectively, we decided to prepare compounds 5-7 to attach as SAMs, see Figure 5. Difficulties and unexpected problems

  7. Integral nuclear fuel element assembly

    International Nuclear Information System (INIS)

    Schluderberg, D. C.

    1985-01-01

    An integral nuclear fuel element assembly utilizes longitudinally finned fuel pins. The continuous or interrupted fins of the fuel pins are brazed to fins of juxtaposed fuel pins or directly to the juxtaposed fuel pins or both. The integrally brazed fuel assembly is designed to satisfy the thermal and hydraulic requirements of a fuel assembly lattice having moderator to fuel atom ratios required to achieve high conversion and breeding ratios

  8. A conceptual design of assembly strategy and dedicated tools for assembly of 40o sector

    International Nuclear Information System (INIS)

    Park, H.K.; Nam, K.O.; Kim, D.J.; Ahn, H.J.; Lee, J.H.; Im, K.; Shaw, R.

    2010-01-01

    The International Thermanuclear Experimental Reactor (ITER) tokamak device is composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 o sectors. Each VV/TFCs/VVTS 40 o sector is made up of one 40 o VV, two 20 o TFCs and associated VVTS segments. The 40 o sectors are sub-assembled at assembly hall respectively and then nine 40 o sectors sub-assembled at assembly hall are finally assembled at tokamak in-pit hall. The assembly strategy and tools for the 40 o sector sub-assembly and final assembly should be developed to satisfy the basic assembly requirements of the ITER tokamak device. Accordingly, the purpose-built assembly tools should be designed and manufactured considering assembly plan, available space, cost, safety, easy operation, efficient maintenance, and so on. The 40 o sector assembly tools are classified into 2 groups. One group is the sub-assembly tools including upending tool, lifting tool, sub-assembly tool, VV supports and bracing tools used at assembly hall and the other group is the in-pit assembly tools including lifting tool, central column, radial beams and their supports. This paper describes the current status of the assembly strategy and major tools for the VV/TFCs/VVTS 40 o sector assembly at in-pit hall and assembly hall. The conceptual design of the major assembly tools and assembly process at assembly hall and tokamak in-pit hall are presented also.

  9. Hypothalamic-pituitary vascularization in pituitary stalk transection syndrome: is the pituitary stalk really transected? The role of gadolinium-DTPA with spin-echo T1 imaging and turbo-FLASH technique

    Energy Technology Data Exchange (ETDEWEB)

    Genovese, E. [Dept. of Radiology, IRCCS Policlinico S. Matteo, Pavia (Italy); Maghnie, M. [Dept. of Pediatrics, Univ. of Pavia (Italy); Beluffi, G. [Dept. of Radiodiagnosis, Section of Pediatric Radiology, IRCCS Policlinico S. Matteo, Pavia (Italy); Villa, A. [Dept. of Radiology, IRCCS Policlinico S. Matteo, Pavia (Italy); Sammarchi, L. [Dept. of Radiology, IRCCS Policlinico S. Matteo, Pavia (Italy); Severi, F. [Dept. of Pediatrics, Univ. of Pavia (Italy); Campani, R. [Dept. of Radiology, IRCCS Policlinico S. Matteo, Pavia (Italy)

    1997-01-01

    We examined 14 patients, aged 10-25 years, with idiopathic hypopituitarism. All presented an ectopic posterior pituitary at the median eminence with a hypoplastic anterior pituitary on magnetic resonance imaging (MRI). Eight patients had isolated growth hormone deficit (IGHD) and six had multiple hormone deficits (MPHD). Unenhanced MRI showed the pituitary stalk, which was extremely thin, in only three patients, while T1-weighted images obtained after intravenous injection of gadopentetate dimeglumine (Gd-DTPA) showed a thin pituitary stalk in seven patients (six with IGHD and one with MPHD), demonstrating a preserved vascular component of the stalk. MRI with Gd-DTPA was more sensitive than unenhanced MRI in detecting the pituitary stalk in patients with hypopituitarism with an ectopic posterior pituitary: the stalk was demonstrated in 50 % of the cases (seven patients), versus 21.4 % (three patients) by unenhanced MRI. The dynamic study of the hypothalamo-hypophyseal axis performed with turbo-FLASH sequences after bolus injection of Gd-DTPA showed the residual anterior pituitary to have arterial enhancement times, which suggests that an arterial system compensates for the absent or diminished blood supply from the portal system, independent of stalk detection. (orig.). With 5 figs., 1 tab.

  10. Hypothalamic-pituitary vascularization in pituitary stalk transection syndrome: is the pituitary stalk really transected? The role of gadolinium-DTPA with spin-echo T1 imaging and turbo-FLASH technique

    International Nuclear Information System (INIS)

    Genovese, E.; Maghnie, M.; Beluffi, G.; Villa, A.; Sammarchi, L.; Severi, F.; Campani, R.

    1997-01-01

    We examined 14 patients, aged 10-25 years, with idiopathic hypopituitarism. All presented an ectopic posterior pituitary at the median eminence with a hypoplastic anterior pituitary on magnetic resonance imaging (MRI). Eight patients had isolated growth hormone deficit (IGHD) and six had multiple hormone deficits (MPHD). Unenhanced MRI showed the pituitary stalk, which was extremely thin, in only three patients, while T1-weighted images obtained after intravenous injection of gadopentetate dimeglumine (Gd-DTPA) showed a thin pituitary stalk in seven patients (six with IGHD and one with MPHD), demonstrating a preserved vascular component of the stalk. MRI with Gd-DTPA was more sensitive than unenhanced MRI in detecting the pituitary stalk in patients with hypopituitarism with an ectopic posterior pituitary: the stalk was demonstrated in 50 % of the cases (seven patients), versus 21.4 % (three patients) by unenhanced MRI. The dynamic study of the hypothalamo-hypophyseal axis performed with turbo-FLASH sequences after bolus injection of Gd-DTPA showed the residual anterior pituitary to have arterial enhancement times, which suggests that an arterial system compensates for the absent or diminished blood supply from the portal system, independent of stalk detection. (orig.). With 5 figs., 1 tab

  11. Subcritical assemblies, use and their feasibility assessment

    International Nuclear Information System (INIS)

    Haroon, M.R.

    1982-03-01

    In developing countries, subcritical assemblies can be a useful tool for training and research in the field of nuclear technology with minimum cost. The historical development of subcritical assemblies and the reactor physics experiments which can be carried out using this facility are outlined. The different types of subcritical assemblies have been described and material requirements for each assembly have been pointed out. (author)

  12. Gibberellins and the cold requirement of tulip

    NARCIS (Netherlands)

    Rebers, M.

    1994-01-01

    Tulip bulbs (Tulipa gesneriana L.), with terminal buds containing a complete flower, require a period of low temperature to prepare the bud for floral stalk elongation and full flower development at subsequent higher temperatures. For the cultivar

  13. Exploring of Agro Waste (Pineapple Leaf, Corn Stalk, and Napier Grass) by Chemical Composition and Morphological Study

    OpenAIRE

    Angzzas Sari Mohd Kassim; Halizah Awang; Ashuvila Mohd Aripin

    2013-01-01

    Malaysia is a country that is a rich source of agricultural waste material. Three different crops were studied here, including pineapple (Ananas comosus) leaf, corn (Zea mays) stalk, and Napier grass (Pennisetum purpureum). These crops are characterized as agricultural waste materials in Malaysia and have a high potential to be used as alternative fibers for the paper making industry. The objective of this work was to analyze the chemical composition of pineapple leaf, corn stalk, and Napier ...

  14. Effect of Preserving the Pituitary Stalk During Resection of Craniopharyngioma in Children on the Diabetes Insipidus and Relapse Rates and Long-Term Outcomes.

    Science.gov (United States)

    Cheng, Jing; Fan, Yanqin; Cen, Bo

    2017-09-01

    The objective of this study was to investigate the effect of preserving an infiltrated pituitary stalk during the resection of craniopharyngioma of pituitary stalk origin on postoperative outcomes and thus provide a theoretical basis for microsurgical treatment and prognosis. We screened the clinical data of all 103 pediatric patients with craniopharyngioma undergoing surgical treatment at our department between January 2006 and January 2013 and conducted a retrospective analysis of 82 patients with craniopharyngioma originating in the pituitary stalk. The patients were followed up from 12 months to 8 years. We analyzed the effect of preserving the pituitary stalk on the early and persistent diabetes insipidus rates, postoperative relapse rate, and mortality. In the total resection group (n = 67), the early and persistent diabetes insipidus rates were significantly lower in the 46 patients (68.7%) with a pituitary stalk than in those whose pituitary stalk was removed (P  0.05). In the subtotal resection group (n = 15), a significant difference was observed in the early and persistent diabetes insipidus rates (P  0.05). For children with craniopharyngioma of pituitary stalk origin, preserving the pituitary stalk has a significant effect on the early and persistent diabetes insipidus rates. When intraoperative exploration showed excessive adhesion between the tumor and pituitary stalk, we opted to preserve the pituitary stalk, which significantly reduced the early and persistent postoperative diabetes insipidus rates, without significantly increasing the relapse or mortality rate.

  15. Stalk yield of sugarcane cultivars under different water regimes by subsurface drip irrigation

    Directory of Open Access Journals (Sweden)

    Aderson S. de Andrade Junior

    Full Text Available ABSTRACT This study aimed to evaluate the stalk yield of ten sugarcane cultivars (RB962962, RB931011, RB931530, RB98710, RB92579, RB867515, RB863129, SP791011, RB72545 and VAT90212 subjected to water deficit, full irrigation and water surplus by subsurface drip irrigation, during three cropping seasons (2011-2014. The experiment was conducted at the Experimental Field of Embrapa Meio-Norte, Teresina, Piauí State, Brazil, in dystrophic Red Yellow Argisol. The cultivars RB962962 (162.3 Mg ha-1 and RB867515 (158.5 Mg ha-1 have better stalk yield compared with other cultivars in all water regimes and cropping seasons.

  16. Adsorption of hexavalent chromium on modified corn stalk using different cross-linking agents

    Science.gov (United States)

    Chen, Suhong; Zhu, Yi; Han, Zhijun; Feng, Gao; Jia, Yuling; Fu, Kaifang; Yue, Qinyan

    2017-12-01

    In this study, four different types of adsorbents modified from corn stalk were synthesized after the reaction with epichlorohydrin, N,N-dimethylformamide, triethylamine and different cross-linking agents. The surface functional groups and thermal stability of modified corn stalk (MCSs) were characterized using FTIR and TG analysis, respectively. The feasibility of using MCSs to remove Cr(VI) were evaluated. Adsorption isotherms were determined and modeled with Langmuir, Freundlich and Temkin equations. The experimental results showed that MCS modified using diethylenetriamine (DETA) had the best modification effect, and the adsorption capacity of Cr(VI) reached as high as 227.27 mg/g at 323 K. Thermodynamic study showed that the Cr(VI) adsorption onto MCSs was endothermic processes. As a result, MCS by using DETA as cross-linking agent has good potential for the removal of Cr(VI) from aqueous solutions.

  17. Mesoporous activated carbon from corn stalk core for lithium ion batteries

    Science.gov (United States)

    Li, Yi; Li, Chun; Qi, Hui; Yu, Kaifeng; Liang, Ce

    2018-04-01

    A novel mesoporous activated carbon (AC) derived from corn stalk core is prepared via a facile and effective method which including the decomposition and carbonization of corn stalk core under an inert gas atmosphere and further activation process with KOH solution. The mesoporous activated carbon (AC) is characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) measurements. These biomass waste derived from activated carbon is proved to be promising anode materials for high specific capacity lithium ion batteries. The activated carbon anode possesses excellent reversible capacity of 504 mAh g-1 after 100 cycles at 0.2C. Compared with the unactivated carbon (UAC), the electrochemical performance of activated carbon is significantly improved due to its mesoporous structure.

  18. Thermogravimetric kinetics of corn stalk pretreated by oleaginous fungi Cunninghamella echinulata.

    Science.gov (United States)

    Wu, Jianguo; Gao, Shi; Wan, Jilin; Zeng, Yelin; Ma, Fuying; Zhang, Xiaoyu

    2011-04-01

    The thermogravimetric and composition of corn stalk pretreated by oleaginous fungi Cunninghamella echinulata had been studied in this paper. Results indicated that pretreatment by oleaginous fungi C. echinulata could decrease the activation energy and make the pyrolysis more efficient and energy-saving. By bio-pretreatment, the contents of elements agreed with the weight loss, sugar content, and oil contents, especially the sulfur content was greatly decreased, greatly eliminating the inventory of gas contamination such as the emission of SOx and making the pyrolysis more environmentally friendly. Therefore, corn stalk with sugar pretreated by oleaginous fungi C. echinulata should be a good pyrolysis material to obtain high quality bio-oil. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Delayed diagnosis of pituitary stalk interruption syndrome with severe recurrent hyponatremia caused by adrenal insufficiency

    Directory of Open Access Journals (Sweden)

    Kyung Mi Jang

    2017-09-01

    Full Text Available Pituitary stalk interruption syndrome (PSIS involves the occurrence of a thin or absent pituitary stalk, hypoplasia of the adenohypophysis, and ectopic neurohypophysis. Diagnosis is confirmed using magnetic resonance imaging. Patients with PSIS have a variable degree of pituitary hormone deficiency and a wide spectrum of clinical manifestations. The clinical course of the disease in our patient is similar to that of a syndrome of inappropriate antidiuretic hormone secretion. This is thought to be caused by failure in the suppression of vasopressin secretion due to hypocortisolism. To the best of our knowledge, there is no case report of a patient with PSIS presenting with hyponatremia as the first symptom in Korean children. Herein, we report a patient with PSIS presenting severe recurrent hyponatremia as the first symptom, during adolescence and explain the pathophysiology of hyponatremia with secondary adrenal insufficiency.

  20. Microstructure and nanomechanical properties of single stalks from diatom Didymosphenia geminata and their change due to adsorption of selected metal ions.

    Science.gov (United States)

    Zgłobicka, Izabela; Chlanda, Adrian; Woźniak, Michał; Łojkowski, Maciej; Szoszkiewicz, Robert; Mazurkiewicz-Pawlicka, Marta; Święszkowski, Wojciech; Wyroba, Elżbieta; Kurzydłowski, Krzysztof J

    2017-08-01

    We present topographical and nanomechanical characterization of single Didymosphenia geminata stalk. We compared the samples before and after adsorption of metal ions from freshwater samples. Transmission electron microscopy studies of single stalk cross-sections have shown three distinct layers and an additional thin extra coat on the external layer (called "EL"). Using scanning electron microscopy and atomic force microscopy (AFM), we found that topography of single stalks after ionic adsorption differed significantly from topography of pristine stalks. AFM nanoindentation studies in ambient conditions yielded elastic moduli of 214 ± 170 MPa for pristine stalks and 294 ± 108 MPa for stalks after ionic adsorption. Statistical tests showed that those results were significantly different. We conducted only preliminary comparisons between ionic adsorption of several stalks in air and in water. While the stalks with ions were on average stiffer than the pristine stalks in air, they became more compliant than the pristine stalks in water. We also heated the stalks and detected EL softening at 50°C ± 15°C. AFM nanoindentation in air on the softened samples yielded elastic moduli of 26 ± 9 MPa for pristine samples and 43 ± 22 MPa for stalks with absorbed metal ions. Substantial decrease of the EL elastic moduli after heating was expected. Significantly different elastic moduli for the samples after ionic adsorption in both cases (i.e., for heated and nonheated samples), as well as behavior of the stalks immersed in water, point to permanent structural EL changes due to ions. © 2017 Phycological Society of America.

  1. Measurement of the heat of smoldering combustion in straws and stalks by means of simultaneous thermal analysis

    Energy Technology Data Exchange (ETDEWEB)

    He, Fang; Yi, Weiming; Zha, Jianwen [School of Light Industry and Agricultural Engineering, Shandong University of Technology, Zibo, Shandong 255049 (China)

    2009-01-15

    In order to investigate reaction heat of agro-stalks smoldering, wheat straw, corn stalk, cotton stalk, millet straw, sorghum stalk and sweet potato rattan powder were smoldered and pyrolyzed in a simultaneous thermal analyzer (STA). The samples were placed in a platinum crucible (5 mm x 5 mm) with a lid (with a 1 mm hole) on a high-accuracy differential scanning calorimetry-heat capacity (DSC-cp) holder in the furnace of an STA and heated from 303 to 1073 K at a heating rate of 10 K min{sup -1}. Sweeping gas with a flow rate of 25 ml min{sup -1} was air and nitrogen during smoldering and pyrolysis, respectively. Results showed that the heat emission characteristic of the smoldering process differed remarkably from the pyrolysis process. Based on the analysis of the DSC curves, oxidative polymer degradation heat and char oxidation heat were obtained from experimental data. It showed that the oxidative polymer degradation heat of the agro-stalks is more than 6.92 MJ kg{sup -1} consumed matter, higher than that of cellulose paper. And char oxidation heat is around 23 MJ kg{sup -1} consumed matter, similar to that of cellulose paper, but higher than that of cigarette. Total net heat emission of smoldering in STA was also obtained. These data can be used as reference data in analyzing smoldering of agro-stalks under similar conditions. (author)

  2. Corn stalk as matrix in decomposting toilet for treating urine and feces

    Science.gov (United States)

    Sintawardani, N.; Nilawati, D.; Astuti, J. T.

    2017-03-01

    Bio-Toilet technology (BT) which is appropriate for the habits of Indonesian people has been studied and developed. BT is a dry toilet technology commonly uses ligno-cellulosic waste materials as matrix to facilitate the growth of natural microbes. In aerobic condition, microbes degrade feces and urine. Mineral as the leftover of feces and urine, such as nitrogen (N), phosphorus (P), and potassium (K) remain in the rest of matrix waste. After certain period. matrix can be harvested and used as soil conditioner. BT uses much less water, mobile, and very useful to be applied in areas where water availability is limited. BT type with different capacities, user amounts and mixing systems has been developed using sawdust for matrix. Since corn stalk is categorized as useless and priceless waste, its application in BT is challenging. Performance of BT with corn stalk as matrix to degrade feces and urine of carnivore imitating the human waste was observed. BT M-15 manual mixing type with paddle was filled with chopped corn stalk as much as 45% of total volume. This BT was designed for 15 person as users per day if 80% reactor volume was filled with ligno-cellulosic matrix. It is assumed that 150 g of feces are discharged once per person/day and 1000 mL of urine 6-8 times per day. Start up process was made in the beginning to initialize the needed microbes in the reactor (matrix). The discharge of feces and urine were increased slowly and gradually the users were increased from 1 to 4 users per day. Performance of BT was indicated by the change in the pile that showed by moisture content, temperature and pH. C/N ratio in matrix decreased significantly from 43 to 17. This result showed that the corn stalk could be used as matrix in BT.

  3. Is nectar reabsorption restricted by the stalk cells of floral and extrafloral nectary trichomes?

    Science.gov (United States)

    Cardoso-Gustavson, P; Davis, A R

    2015-01-01

    Reabsorption is a phase of nectar dynamics that occurs concurrently with secretion; it has been described in floral nectaries that exude nectar through stomata or unicellular trichomes, but has not yet been recorded in extrafloral glands. Apparently, nectar reabsorption does not occur in multicellular secretory trichomes (MST) due to the presence of lipophilic impregnations - which resemble Casparian strips - in the anticlinal walls of the stalk cells. It has been assumed that these impregnations restrict solute movement within MST to occur unidirectionally and exclusively by the symplast, thereby preventing nectar reflux toward the underlying nectary tissues. We hypothesised that reabsorption is absent in nectaries possessing MST. The fluorochrome lucifer yellow (LYCH) was applied to standing nectar of two floral and extrafloral glands of distantly related species, and then emission spectra from nectary sections were systematically analysed using confocal microscopy. Passive uptake of LYCH via the stalk cells to the nectary tissues occurred in all MST examined. Moreover, we present evidence of nectar reabsorption in extrafloral nectaries, demonstrating that LYCH passed the stalk cells of MST, although it did not reach the deepest nectary tissues. Identical (control) experiments performed with neutral red (NR) demonstrated no uptake of this stain by actively secreting MST, whereas diffusion of NR did occur in plasmolysed MST of floral nectaries at the post-secretory phase, indicating that nectar reabsorption by MST is governed by stalk cell physiology. Interestingly, non-secretory trichomes failed to reabsorb nectar. The role of various nectary components is discussed in relation to the control of nectar reabsorption by secretory trichomes. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

  4. LOFT reactor vessel 290/sup 0/ downcomer stalk instrument penetration flange stress analysis

    Energy Technology Data Exchange (ETDEWEB)

    Finicle, D.P.

    1978-06-06

    The LOFT Reactor Vessel 290/sup 0/ Downcomer Stalk Instrument Penetration Flange Stress Analysis has been completed using normal operational and blowdown loading. A linear elastic analysis was completed using simplified hand analysis techniques. The analysis was in accordance with the 1977 ASME Boiler and Pressure Vessel Code, Section III, for a Class 1 component. Loading included internal pressure, bolt preload, and thermal gradients due to normal operating and blowdown.

  5. Identification of sources of resistance to anthracnose stalk rot in maize

    Directory of Open Access Journals (Sweden)

    Alessandro Nicoli

    Full Text Available ABSTRACT: Adoption of resistant cultivars is the primary measure used to control anthracnose stalk rot. The goal of this study was to identify maize-resistant genotypes to anthracnose stalk rot, which are similar to the hybrid 2B710. Experiments were performed at Embrapa Maize and Sorghum experimental fields in Brazil. The first experimental trial evaluated 234 maize lines as well as two commercials hybrids, BRS1010 (susceptible and 2B710 (resistant. Artificial inoculations were performed with a strain at the blister (R2 phase, and evaluation of disease severity was performed after 30 days. The second experimental trial evaluated 48 maize lines and hybrids, inoculated with two Colletotrichum graminicola strains. In the first trial, eight resistance groups were formed, and the last lines were more resistant, as was the hybrid 2B710, with values between 11.50% and 23.0% of severity. In the second trial, there was an interaction between the two factors, lines and isolates, and the lines often showed the same reaction features as those obtained in the first trial. However, the disease severity was higher for most lines, even when using other isolates. These lines with effective levels of resistance could be used in future studies of inheritance, in programs to develop hybrids, and to identify molecular markers associated with resistance to anthracnose stalk rot in maize.

  6. Thermal Decomposition Properties of Materials from Different Parts of Corn Stalk

    Directory of Open Access Journals (Sweden)

    Siwei Huang

    2015-02-01

    Full Text Available To help better utilize corn stalk (CS, pyrolysis behavior of materials from different parts of the CS including corn stalk without pith, corn root, and corn leaf were analyzed using thermogravimetric analysis (TGA at heating rates of 5, 10, 20, and 25 °C/min. The apparent activation energies determined by the Friedman method for corn stalk without pith, corn root, and corn leaf were in the range of 26.4 to 103.6 kJ/mol, 37.6 to 69.5 kJ/mol, and 35.0 to 103.9 kJ/mol, respectively, depending on the conversion. The main thermal decomposition occurred within a temperature range of 200 to 350 °C (±10 °C. Most of the volatile materials decomposed at less than a 0.8 conversion rate. At greater than a 0.8 conversion rate, the remaining material was mainly char, and the decomposition of char proceeded at higher conversion rates. Different pyrolysis characteristics in the CS indicated that different treatments should be chosen according to different parts for achieving the optimum conversion rate in practical applications.

  7. Yeast polypeptide exit tunnel ribosomal proteins L17, L35 and L37 are necessary to recruit late-assembling factors required for 27SB pre-rRNA processing.

    Science.gov (United States)

    Gamalinda, Michael; Jakovljevic, Jelena; Babiano, Reyes; Talkish, Jason; de la Cruz, Jesús; Woolford, John L

    2013-02-01

    Ribosome synthesis involves the coordinated folding and processing of pre-rRNAs with assembly of ribosomal proteins. In eukaryotes, these events are facilitated by trans-acting factors that propel ribosome maturation from the nucleolus to the cytoplasm. However, there is a gap in understanding how ribosomal proteins configure pre-ribosomes in vivo to enable processing to occur. Here, we have examined the role of adjacent yeast r-proteins L17, L35 and L37 in folding and processing of pre-rRNAs, and binding of other proteins within assembling ribosomes. These three essential ribosomal proteins, which surround the polypeptide exit tunnel, are required for 60S subunit formation as a consequence of their role in removal of the ITS2 spacer from 27SB pre-rRNA. L17-, L35- and L37-depleted cells exhibit turnover of aberrant pre-60S assembly intermediates. Although the structure of ITS2 does not appear to be grossly affected in their absence, these three ribosomal proteins are necessary for efficient recruitment of factors required for 27SB pre-rRNA processing, namely, Nsa2 and Nog2, which associate with pre-60S ribosomal particles containing 27SB pre-rRNAs. Altogether, these data support that L17, L35 and L37 are specifically required for a recruiting step immediately preceding removal of ITS2.

  8. A Molecular Staple: D-Loops in the I Domain of Bacteriophage P22 Coat Protein Make Important Intercapsomer Contacts Required for Procapsid Assembly

    Science.gov (United States)

    D'Lima, Nadia G.

    2015-01-01

    ABSTRACT Bacteriophage P22, a double-stranded DNA (dsDNA) virus, has a nonconserved 124-amino-acid accessory domain inserted into its coat protein, which has the canonical HK97 protein fold. This I domain is involved in virus capsid size determination and stability, as well as protein folding. The nuclear magnetic resonance (NMR) solution structure of the I domain revealed the presence of a D-loop, which was hypothesized to make important intersubunit contacts between coat proteins in adjacent capsomers. Here we show that amino acid substitutions of residues near the tip of the D-loop result in aberrant assembly products, including tubes and broken particles, highlighting the significance of the D-loops in proper procapsid assembly. Using disulfide cross-linking, we showed that the tips of the D-loops are positioned directly across from each other both in the procapsid and the mature virion, suggesting their importance in both states. Our results indicate that D-loop interactions act as “molecular staples” at the icosahedral 2-fold symmetry axis and significantly contribute to stabilizing the P22 capsid for DNA packaging. IMPORTANCE Many dsDNA viruses have morphogenic pathways utilizing an intermediate capsid, known as a procapsid. These procapsids are assembled from a coat protein having the HK97 fold in a reaction driven by scaffolding proteins or delta domains. Maturation of the capsid occurs during DNA packaging. Bacteriophage HK97 uniquely stabilizes its capsid during maturation by intercapsomer cross-linking, but most virus capsids are stabilized by alternate means. Here we show that the I domain that is inserted into the coat protein of bacteriophage P22 is important in the process of proper procapsid assembly. Specifically, the I domain allows for stabilizing interactions across the capsid 2-fold axis of symmetry via a D-loop. When amino acid residues at the tip of the D-loop are mutated, aberrant assembly products, including tubes, are formed instead

  9. Effect of harvest date and stalk section on selected strength ...

    African Journals Online (AJOL)

    Background: The time required to harvest plant crops is important to the plant properties. It is affected by design of the harvest equipment and the desire for high-quality products with low energy usage. Materials and Methods: Strength characteristics of Origanum onites L., an important medicinal aromatic plant, harvested on ...

  10. Recovery from diabetes insipidus and preservation of thyroid function after craniopharyngioma removal and pituitary stalk sectioning.

    Science.gov (United States)

    Ogawa, Yoshikazu; Niizuma, Kuniyasu; Tominaga, Teiji

    2017-11-01

    Craniopharyngioma is a slow-growing tumor, but long-term tumor control with maintenance of quality of life is sometimes very difficult to achieve, and hypothalamic disturbance should be strictly avoided in the treatment. However, management of the pituitary gland and/or pituitary stalk varies among surgeons and institutions. This retrospective review identified 44 patients, 24 males and 20 females with craniopharyngiomas who were initially treated by surgery through the extended transsphenoidal approach with pituitary stalk sectioning at a single institute. If the tumor bed involved the posterior lobe of the pituitary gland, pituitary stalk, anterior and/or mid portion of the third ventricle floor, these structures were removed en-bloc together with the tumor. The closest attention was paid to preserve fine arteries running along the surface of optic chiasm and the lateral walls of the third ventricle. Surgical outcome and changes in postoperative endocrinological status were investigated. Gross total removal was achieved in 40 of 44 patients (91%), and all patients could discharge without autonomic and/or thermal disturbances. Tumor remnants were identified with tight adhesion to the perforating arteries in 2 cases, tight adhesion to mammillary bodies in 1, and optic chiasm in 1. Administration of anti-diuretic hormone could be discontinued in 23 of 44 patients (52.3%) with improved diabetes insipidus (DI), although no patient could discontinue glucocorticoid administration. Preservation of thyroid function was achieved in another 23 of 44 patients (52.3%), and recovery from DI was correlated with preservation of thyroid function (p=0.016). Pituitary dysfunction is partially reversible even with pituitary stalk sectioning. Regrowth of tumor in the anterior and/or mid portion of the third ventricle floor including pituitary stalk can possibly be prevented by aggressive tumor removal, and co-achievement of long-term tumor control with maintenance of quality of life

  11. Innovative Prototype for Separate Harvesting of Cynara Cardunculus Achenes and Stalks

    Energy Technology Data Exchange (ETDEWEB)

    Pari, L.; Fedrizzi, M.; Pansini, L. (Consiglio per la Ricerca e la Sperimentazione in Agricoltura, Unita di Ricerca per l' Ingegneria Agraria, Monterotondo, RM (Italy))

    2008-10-15

    The CRA-ING took part to the Cynara cardunculus harvesting tests organized in Spain in 2007, where UPM has experimental cultivations in the Instituto Madrileno de Investigacion y Desarrollo Rural, Agrario y Alimentario (IMIDRA) de la Consejeria de Economia y Innovacion Tecnologica de la Comunidad de Madrid in El Encin, near Alcala De Henarez. The harvesting tests were carried out in week 33 (August 13th-17th); the cultivation was found part in good condition of maturity, part still not ready for harvesting. The test was carried out on the dried part of the crops. The tests aimed at evaluating a new mechanical equipment (head) working connected to a selfpropelled combine for separated harvesting of the different fractions obtainable by the cultivation assigned to different transformation: oil extraction from seeds and energy production from epigeous biomass combustion. During the tests carried out in 2006 in Portugal and Spain, it was observed how a combine harvester with a maize head was able to separate the seed with good accuracy. Likewise the difficulty of collecting the lignocellulosic fraction after its passage was highlighted. A combine with a wheat head could cut the stalk in an appropriate height range, but could not separate the head from the stalk. A sunflower head cut the capitula, but not the stalk. The project concept, supplied to a Firm that already builds heads for maize, wheat, sunflowers, soybean and so on, included the upper devices of a maize head and a classic wheat head (without the paddle wheel) in the lower part, to obtain capitula detachment and effective threshing and, at the same time, the stalk cut. Some modifications were specified to allow the cut of the stalk next to the ground and its successive tier in the space between the front wheels, where the discharge system of the threshing device would then provide to drop the remains of the capitula threshing. The basic concept of the machine, to separate and thresh the capitula and to drop

  12. Neuraminidase stalk length and additional glycosylation of the hemagglutinin influence the virulence of influenza H5N1 viruses for mice.

    Science.gov (United States)

    Matsuoka, Yumiko; Swayne, David E; Thomas, Colleen; Rameix-Welti, Marie-Anne; Naffakh, Nadia; Warnes, Christine; Altholtz, Melanie; Donis, Ruben; Subbarao, Kanta

    2009-05-01

    Following circulation of avian influenza H5 and H7 viruses in poultry, the hemagglutinin (HA) can acquire additional glycosylation sites, and the neuraminidase (NA) stalk becomes shorter. We investigated whether these features play a role in the pathogenesis of infection in mammalian hosts. From 1996 to 2007, H5N1 viruses with a short NA stalk have become widespread in several avian species. Compared to viruses with a long-stalk NA, viruses with a short-stalk NA showed a decreased capacity to elute from red blood cells and an increased virulence in mice, but not in chickens. The presence of additional HA glycosylation sites had less of an effect on virulence than did NA stalk length. The short-stalk NA of H5N1 viruses circulating in Asia may contribute to virulence in humans.

  13. Neuraminidase Stalk Length and Additional Glycosylation of the Hemagglutinin Influence the Virulence of Influenza H5N1 Viruses for Mice▿

    Science.gov (United States)

    Matsuoka, Yumiko; Swayne, David E.; Thomas, Colleen; Rameix-Welti, Marie-Anne; Naffakh, Nadia; Warnes, Christine; Altholtz, Melanie; Donis, Ruben; Subbarao, Kanta

    2009-01-01

    Following circulation of avian influenza H5 and H7 viruses in poultry, the hemagglutinin (HA) can acquire additional glycosylation sites, and the neuraminidase (NA) stalk becomes shorter. We investigated whether these features play a role in the pathogenesis of infection in mammalian hosts. From 1996 to 2007, H5N1 viruses with a short NA stalk have become widespread in several avian species. Compared to viruses with a long-stalk NA, viruses with a short-stalk NA showed a decreased capacity to elute from red blood cells and an increased virulence in mice, but not in chickens. The presence of additional HA glycosylation sites had less of an effect on virulence than did NA stalk length. The short-stalk NA of H5N1 viruses circulating in Asia may contribute to virulence in humans. PMID:19225004

  14. Joint approach based on clinical and imaging features to distinguish non-neoplastic from neoplastic pituitary stalk lesions.

    Directory of Open Access Journals (Sweden)

    Ji Ye Lee

    Full Text Available Distinguishing non-neoplastic pituitary stalk lesions (non-NPSLs from neoplastic pituitary stalk lesions (NPSLs is a major concern in guiding treatment for a thickened pituitary stalk. Our study aimed to aid provide preoperative diagnostic assistance by combining clinical and magnetic resonance imaging (MRI findings to distinguish non-NPSLs from NPSLs.We recruited 158 patients with thickened pituitary stalk lesions visible on MRI. Laboratory findings included hypopituitarism, diabetes insipidus (DI, and hyperprolactinemia. MR images were assessed for anterior-posterior thickness (mm, diffuse pituitary stalk thickening, cystic changes, a high T1 signal, and glandular or extrasellar involvement. A diagnostic model was developed using a recursive partitioning logistic regression analysis. The model was validated in an independent dataset comprising 63 patients, and its diagnostic performance was compared with that of the original radiological reports.A univariate analysis found significant associations of DI (P = 0.006, absence of extrasellar involvement (P = 0.002, and lower stalk thickness (P = 0.031 with non-NPSLs. A diagnostic model was created using the following parameters (in order of priority: 1 lack of extrasellar involvement, 2 stalk thickness < 5.3 mm, and 3 presence of DI. The diagnostic performance (area under the curve; AUC of this model in the independent set was 0.813, representing a significant improvement over the original radiological reports (AUC: 0.713, P = 0.029.The joint diagnostic approach based on clinical and imaging-based factors robustly distinguished non-NPSLs from NPSLs. This approach could guide treatment strategies and prevent unnecessary surgery in patients with non-NPSL.

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Abe, Hideaki; Sakai, Takao; Ishida, Tomio; Yokota, Norikatsu.

    1992-01-01

    The lower ends of a plurality of plate-like shape memory alloys are secured at the periphery of the upper inside of the handling head of a fuel assembly. As the shape memory alloy, a Cu-Zn alloy, a Ti-Pd alloy or a Fe-Ni alloy is used. When high temperature coolants flow out to the handling head, the shape memory alloy deforms by warping to the outer side more greatly toward the upper portion thereof with the temperature increase of the coolants. As the result, the shape of the flow channel of the coolants is changed so as to enlarge at the exit of the upper end of the fuel assembly. Then, the pressure loss of the coolants in the fuel assembly is decreased by the enlargement. Accordingly, the flow rate of the coolants in the fuel assembly is increased to lower the temperature of the coolants. Further, high temperature coolants and low temperature coolants are mixed sufficiently just above the fuel assembly. This can suppress the temperature fluctuation of the mixed coolants in the upper portion of the reactor core, thereby enabling to decrease a fatigue and failures of the structural components in the upper portion of the reactor core. (I.N.)

  16. Haldane’s Rule Is Linked to Extraordinary Sex Ratios and Sperm Length in Stalk-Eyed Flies

    Science.gov (United States)

    Wilkinson, Gerald S.; Christianson, Sarah J.; Brand, Cara L.; Ru, George; Shell, Wyatt

    2014-01-01

    We use three allopatric populations of the stalk-eyed fly Teleopsis dalmanni from Southeast Asia to test two predictions made by the sex chromosome drive hypothesis for Haldane’s rule. The first is that modifiers that suppress or enhance drive should evolve rapidly and independently in isolated populations. The second is that drive loci or modifiers should also cause sterility in hybrid males. We tested these predictions by assaying the fertility of 2066 males derived from backcross experiments involving two pairs of populations and found that the proportion of mated males that fail to produce any offspring ranged from 38 to 60% among crosses with some males producing strongly female-biased or male-biased sex ratios. After genotyping each male at 25–28 genetic markers we found quantitative trait loci (QTL) that jointly influence male sterility, sperm length, and biased progeny sex ratios in each pair of populations, but almost no shared QTL between population crosses. We also discovered that the extant XSR chromosome has no effect on sex ratio or sterility in these backcross males. Whether shared QTL are caused by linkage or pleiotropy requires additional study. Nevertheless, these results indicate the presence of a “cryptic” drive system that is currently masked by suppressing elements that are associated with sterility and sperm length within but not between populations and, therefore, must have evolved since the populations became isolated, i.e., in hybrid sterility. PMID:25164880

  17. Fuel assembly

    International Nuclear Information System (INIS)

    Nakatsuka, Masafumi; Matsuzuka, Ryuji.

    1976-01-01

    Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

  18. Fuel assemblies

    International Nuclear Information System (INIS)

    Nagano, Mamoru; Yoshioka, Ritsuo

    1983-01-01

    Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

  19. Spool assembly support analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the pump pit spool assemblies. Hand calculations were used for the analysis. UBC, AISC, and load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  20. The cellulose-binding activity of the PsB multiprotein complex is required for proper assembly of the spore coat and spore viability in Dictyostelium discoideum.

    Science.gov (United States)

    Srinivasan, S; Griffiths, K R; McGuire, V; Champion, A; Williams, K L; Alexander, S

    2000-08-01

    The terminal event of spore differentiation in the cellular slime mould Dictyostelium discoideum is the assembly of the spore coat, which surrounds the dormant amoeba and allows the organism to survive during extended periods of environmental stress. The spore coat is a polarized extracellular matrix composed of glycoproteins and cellulose. The process of spore coat formation begins by the regulated secretion of spore coat proteins from the prespore vesicles (PSVs). Four of the major spore coat proteins (SP96, PsB/SP85, SP70 and SP60) exist as a preassembled multiprotein complex within the PSVs. This complete complex has an endogenous cellulose-binding activity. Mutant strains lacking either the SP96 or SP70 proteins produce partial complexes that do not have cellulose-binding activity, while mutants lacking SP60 produce a partial complex that retains this activity. Using a combination of immunofluorescence microscopy and biochemical methods we now show that the lack of cellulose-binding activity in the SP96 and SP70 mutants results in abnormally assembled spore coats and spores with greatly reduced viability. In contrast, the SP60 mutant, in which the PsB complex retains its cellulose-binding activity, produces spores with apparently unaltered structure and viability. Thus, it is the loss of the cellulose-binding activity of the PsB complex, rather than the mere loss of individual spore coat proteins, that results in compromised spore coat structure. These results support the idea that the cellulose-binding activity associated with the complete PsB complex plays an active role in the assembly of the spore coat.

  1. Stability of the 'L12 stalk' in ribosomes from mesophilic and (hyper)thermophilic Archaea and Bacteria.

    Science.gov (United States)

    Shcherbakov, D; Dontsova, M; Tribus, M; Garber, M; Piendl, W

    2006-01-01

    The ribosomal stalk complex, consisting of one molecule of L10 and four or six molecules of L12, is attached to 23S rRNA via protein L10. This complex forms the so-called 'L12 stalk' on the 50S ribosomal subunit. Ribosomal protein L11 binds to the same region of 23S rRNA and is located at the base of the 'L12 stalk'. The 'L12 stalk' plays a key role in the interaction of the ribosome with translation factors. In this study stalk complexes from mesophilic and (hyper)thermophilic species of the archaeal genus Methanococcus and from the Archaeon Sulfolobus solfataricus, as well as from the Bacteria Escherichia coli, Geobacillus stearothermophilus and Thermus thermophilus, were overproduced in E.coli and purified under non-denaturing conditions. Using filter-binding assays the affinities of the archaeal and bacterial complexes to their specific 23S rRNA target site were analyzed at different pH, ionic strength and temperature. Affinities of both archaeal and bacterial complexes for 23S rRNA vary by more than two orders of magnitude, correlating very well with the growth temperatures of the organisms. A cooperative effect of binding to 23S rRNA of protein L11 and the L10/L12(4) complex from mesophilic and thermophilic Archaea was shown to be temperature-dependent.

  2. Valve assembly

    International Nuclear Information System (INIS)

    Sandling, M.

    1981-01-01

    An improved valve assembly, used for controlling the flow of radioactive slurry, is described. Radioactive contamination of the air during removal or replacement of the valve is prevented by sucking air from the atmosphere through a portion of the structure above the valve housing. (U.K.)

  3. Fuel assembly

    International Nuclear Information System (INIS)

    Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

    1988-01-01

    A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

  4. Pituitary stalk interruption syndrome in Chinese people: clinical characteristic analysis of 55 cases.

    Directory of Open Access Journals (Sweden)

    Qinghua Guo

    Full Text Available OBJECTIVE: Pituitary stalk interruption syndrome (PSIS is characterized by the absence of pituitary stalk, pituitary hypoplasia, and ectopic posterior pituitary. Due to the rarity of PSIS, clinical data are limited, especially in Chinese people. Herein, we analyzed the clinical characteristics of patients diagnosed with PSIS from our center over 10 years. PATIENTS AND METHODS: We retrospectively analyzed the clinical manifestations and laboratory and MRI findings in 55 patients with PSIS. RESULTS: Of the 55 patients with PSIS, 48 (87.3% were male. The average age was 19.7±6.7 years and there was no familial case. A history of breech delivery was documented in 40 of 45 patients (88.9% and 19 of 55 patients (34.5% had a history of dystocia. Short stature was found in 47 of 55 patients (85.5% and bone age delayed 7.26±5.37 years. Secondary sex characteristics were poor or undeveloped in most patients. The prevalence of deficiencies in growth hormone, gonadotropins, corticotropin, and thyrotropin were 100%, 95.8%, 81.8%, 76.3%, respectively. Hyperprolactinemia was found in 36.4% of patients. Three or more pituitary hormone deficiencies were found in 92.7% of the patients. All patients had normal posterior pituitary function and absent pituitary stalk on imaging. The average height of anterior pituitary was 28 mm, documented anterior pituitary hypoplasia. Midline abnormalities were presented in 9.1% of patients. CONCLUSIONS: The clinical features of our Chinese PSIS patients seem to be different from other reported patients in regarding to the higher degree of hypopituitarism and lower prevalence of midline defects. In addition, our patients were older at the time of case detection and the bone age was markedly delayed. We also had no cases of familial PSIS.

  5. Ribosomal Stalk Protein Silencing Partially Corrects the ΔF508-CFTR Functional Expression Defect.

    Directory of Open Access Journals (Sweden)

    Guido Veit

    2016-05-01

    Full Text Available The most common cystic fibrosis (CF causing mutation, deletion of phenylalanine 508 (ΔF508 or Phe508del, results in functional expression defect of the CF transmembrane conductance regulator (CFTR at the apical plasma membrane (PM of secretory epithelia, which is attributed to the degradation of the misfolded channel at the endoplasmic reticulum (ER. Deletion of phenylalanine 670 (ΔF670 in the yeast oligomycin resistance 1 gene (YOR1, an ABC transporter of Saccharomyces cerevisiae phenocopies the ΔF508-CFTR folding and trafficking defects. Genome-wide phenotypic (phenomic analysis of the Yor1-ΔF670 biogenesis identified several modifier genes of mRNA processing and translation, which conferred oligomycin resistance to yeast. Silencing of orthologues of these candidate genes enhanced the ΔF508-CFTR functional expression at the apical PM in human CF bronchial epithelia. Although knockdown of RPL12, a component of the ribosomal stalk, attenuated the translational elongation rate, it increased the folding efficiency as well as the conformational stability of the ΔF508-CFTR, manifesting in 3-fold augmented PM density and function of the mutant. Combination of RPL12 knockdown with the corrector drug, VX-809 (lumacaftor restored the mutant function to ~50% of the wild-type channel in primary CFTRΔF508/ΔF508 human bronchial epithelia. These results and the observation that silencing of other ribosomal stalk proteins partially rescue the loss-of-function phenotype of ΔF508-CFTR suggest that the ribosomal stalk modulates the folding efficiency of the mutant and is a potential therapeutic target for correction of the ΔF508-CFTR folding defect.

  6. WHO: World Health Assembly.

    Science.gov (United States)

    McGregor, A

    1992-05-23

    1200 delegates from 175 member countries attended the 45th World Health Assembly in Geneva. Everyone at the Assembly ratified measures to prevent and control AIDS. 12 countries intended to do long term planning for community based care for AIDS patients. Further the Assembly denounced instances where countries and individuals denied the gravity of the AIDS pandemic. In fact, it expressed the importance for urgent and intensive action against HIV/AIDS. The assembly backed proposals to prevent and control sexually transmitted diseases that affect AIDS patients, especially hepatitis B. For example, in countries with hepatitis B prevalence 8% (many countries in Sub-Sahara Africa, Asia, the Pacific region, and South America), health officials should introduce hepatitis B vaccine into their existing immunization programs by 1995. By 1997, this vaccine should be part of all immunization programs. The Assembly was aware of the obstacles of establishing reliable cold chains for nationwide distribution, however. Delegates in Committee A objected to the fact that 50% of the populations of developing countries continued to have limited access to essential drugs. They also expressed disapproval in implementation of WHO's 1988 ethical criteria for promotion of drugs which WHO entrusted to the Council for International Organisations of Medical Sciences (CIOMS). CIOMS lacked WHO's status and thus could not effectively monitor drug advertising. In fact, the pharmaceutical industry as well as WHO provided the funds for a meeting of 25 experts to discuss principles included in the ethical criteria. At least 4 countries insisted that WHO have the ultimate authority in monitoring drug advertising. Delegates did adopt a compromise resolution on this topic which required that industry promotion methods be reported to the 1994 Assembly via the Executive Board. The Assembly requested WHO to establish an international advisory committee on nursing and midwifery and to improve the network of

  7. Fracture line index of fibular stalk and the ankle joint bone in the classification of the ankle joint trauma

    International Nuclear Information System (INIS)

    Wu Jun; Zhang Qiang

    2003-01-01

    Objective: To evaluate the fracture line index of fibular stalk and the ankle joint bone in the classification of the ankle joint trauma. Methods: Measure fracture line index of fibular stalk and the ankle joint in 217 adult cases of fracture and dislocation of ankle joint. And the cases were classified by the results of the measurement. Results: Measurement was unavailable in 9 cases of tearing fracture. In 31 cases, the lesions could not be particularly classified. And in the rest 176 cases the trauma were precisely classified. The over all successful rate was 81.6%. Conclusion: Fracture line index of fibular stalk and the ankle joint bone are valuable in classification of the trauma of the angle joint. While the specificity of this method is low in differentiating the adducting and abducting fracture of the medial angle, in which a combined investigation is recommended

  8. Influenza A Virus Hemagglutinin is Required for the Assembly of Viral Components Including Bundled vRNPs at the Lipid Raft

    Directory of Open Access Journals (Sweden)

    Naoki Takizawa

    2016-09-01

    Full Text Available The influenza glycoproteins, hemagglutinin (HA and neuraminidase (NA, which are associated with the lipid raft, have the potential to initiate virion budding. However, the role of these viral proteins in infectious virion assembly is still unclear. In addition, it is not known how the viral ribonucleoprotein complex (vRNP is tethered to the budding site. Here, we show that HA is necessary for the efficient progeny virion production and vRNP packaging in the virion. We also found that the level of HA does not affect the bundling of the eight vRNP segments, despite reduced virion production. Detergent solubilization and a subsequent membrane flotation analysis indicated that the accumulation of nucleoprotein, viral polymerases, NA, and matrix protein 1 (M1 in the lipid raft fraction was delayed without HA. Based on our results, we inferred that HA plays a role in the accumulation of viral components, including bundled vRNPs, at the lipid raft.

  9. Influenza A Virus Hemagglutinin is Required for the Assembly of Viral Components Including Bundled vRNPs at the Lipid Raft.

    Science.gov (United States)

    Takizawa, Naoki; Momose, Fumitaka; Morikawa, Yuko; Nomoto, Akio

    2016-09-10

    The influenza glycoproteins, hemagglutinin (HA) and neuraminidase (NA), which are associated with the lipid raft, have the potential to initiate virion budding. However, the role of these viral proteins in infectious virion assembly is still unclear. In addition, it is not known how the viral ribonucleoprotein complex (vRNP) is tethered to the budding site. Here, we show that HA is necessary for the efficient progeny virion production and vRNP packaging in the virion. We also found that the level of HA does not affect the bundling of the eight vRNP segments, despite reduced virion production. Detergent solubilization and a subsequent membrane flotation analysis indicated that the accumulation of nucleoprotein, viral polymerases, NA, and matrix protein 1 (M1) in the lipid raft fraction was delayed without HA. Based on our results, we inferred that HA plays a role in the accumulation of viral components, including bundled vRNPs, at the lipid raft.

  10. Fuel assembly inspection device

    International Nuclear Information System (INIS)

    Yaginuma, Yoshitaka

    1998-01-01

    The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

  11. Evidence of the most stretchable egg sac silk stalk, of the European spider of the year Meta menardi.

    Directory of Open Access Journals (Sweden)

    Emiliano Lepore

    Full Text Available Spider silks display generally strong mechanical properties, even if differences between species and within the same species can be observed. While many different types of silks have been tested, the mechanical properties of stalks of silk taken from the egg sac of the cave spider Meta menardi have not yet been analyzed. Meta menardi has recently been chosen as the "European spider of the year 2012", from the European Society of Arachnology. Here we report a study where silk stalks were collected directly from several caves in the north-west of Italy. Field emission scanning electron microscope (FESEM images showed that stalks are made up of a large number of threads, each of them with diameter of 6.03 ± 0.58 µm. The stalks were strained at the constant rate of 2 mm/min, using a tensile testing machine. The observed maximum stress, strain and toughness modulus, defined as the area under the stress-strain curve, are 0.64 GPa, 751% and 130.7 MJ/m(3, respectively. To the best of our knowledge, such an observed huge elongation has never been reported for egg sac silk stalks and suggests a huge unrolling microscopic mechanism of the macroscopic stalk that, as a continuation of the protective egg sac, is expected to be composed by fibres very densely and randomly packed. The Weibull statistics was used to analyze the results from mechanical testing, and an average value of Weibull modulus (m is deduced to be in the range of 1.5-1.8 with a Weibull scale parameter (σ(0 in the range of 0.33-0.41 GPa, showing a high coefficient of correlation (R(2 = 0.97.

  12. Evidence of the most stretchable egg sac silk stalk, of the European spider of the year Meta menardi.

    Science.gov (United States)

    Lepore, Emiliano; Marchioro, Andrea; Isaia, Marco; Buehler, Markus J; Pugno, Nicola M

    2012-01-01

    Spider silks display generally strong mechanical properties, even if differences between species and within the same species can be observed. While many different types of silks have been tested, the mechanical properties of stalks of silk taken from the egg sac of the cave spider Meta menardi have not yet been analyzed. Meta menardi has recently been chosen as the "European spider of the year 2012", from the European Society of Arachnology. Here we report a study where silk stalks were collected directly from several caves in the north-west of Italy. Field emission scanning electron microscope (FESEM) images showed that stalks are made up of a large number of threads, each of them with diameter of 6.03 ± 0.58 µm. The stalks were strained at the constant rate of 2 mm/min, using a tensile testing machine. The observed maximum stress, strain and toughness modulus, defined as the area under the stress-strain curve, are 0.64 GPa, 751% and 130.7 MJ/m(3), respectively. To the best of our knowledge, such an observed huge elongation has never been reported for egg sac silk stalks and suggests a huge unrolling microscopic mechanism of the macroscopic stalk that, as a continuation of the protective egg sac, is expected to be composed by fibres very densely and randomly packed. The Weibull statistics was used to analyze the results from mechanical testing, and an average value of Weibull modulus (m) is deduced to be in the range of 1.5-1.8 with a Weibull scale parameter (σ(0)) in the range of 0.33-0.41 GPa, showing a high coefficient of correlation (R(2) = 0.97).

  13. High-resolution heavily T2-weighted magnetic resonance imaging for evaluation of the pituitary stalk in children with ectopic neurohypophysis

    Energy Technology Data Exchange (ETDEWEB)

    Sanharawi, Imane El; Tzarouchi, Loukia [Hopital Robert Debre, APHP, Service de Radiologie Pediatrique, Paris (France); Cardoen, Liesbeth [Hopital Robert Debre, APHP, Service de Radiologie Pediatrique, Paris (France); Universite Paris Diderot, Paris (France); Martinerie, Laetitia; Leger, Juliane; Carel, Jean-Claude [Universite Paris Diderot, Paris (France); Inserm U1141, DHU PROTECT, Paris (France); Hopital Robert Debre, APHP, Service d' Endocrinologie Pediatrique, Paris (France); Elmaleh-Berges, Monique [Hopital Robert Debre, APHP, Service de Radiologie Pediatrique, Paris (France); Inserm U1141, DHU PROTECT, Paris (France); Alison, Marianne [Hopital Robert Debre, APHP, Service de Radiologie Pediatrique, Paris (France); Universite Paris Diderot, Paris (France); Inserm U1141, DHU PROTECT, Paris (France)

    2017-05-15

    In anterior pituitary deficiency, patients with non visible pituitary stalk have more often multiple deficiencies and persistent deficiency than patients with visible pituitary stalk. To compare the diagnostic value of a high-resolution heavily T2-weighted sequence to 1.5-mm-thick unenhanced and contrast-enhanced sagittal T1-weighted sequences to assess the presence of the pituitary stalk in children with ectopic posterior pituitary gland. We retrospectively evaluated the MRI data of 14 children diagnosed with ectopic posterior pituitary gland between 2010 and 2014. We evaluated the presence of a pituitary stalk using a sagittal high-resolution heavily T2-weighted sequence and a 1.5-mm sagittal T1-weighted turbo spin-echo sequence before and after contrast medium administration. A pituitary stalk was present on at least one of the sequences in 10 of the 14 children (71%). T2-weighted sequence depicted the pituitary stalk in all 10 children, whereas the 1.5-mm-thick T1-weighted sequence depicted 2/10 (20%) before contrast injection and 8/10 (80%) after contrast injection (P=0.007). Compared with 1.5-mm-thick contrast-enhanced T1-weighted sequences, high-resolution heavily T2-weighted sequence demonstrates better sensitivity in detecting the pituitary stalk in children with ectopic posterior pituitary gland, suggesting that contrast injection is unnecessary to assess the presence of a pituitary stalk in this setting. (orig.)

  14. High-resolution heavily T2-weighted magnetic resonance imaging for evaluation of the pituitary stalk in children with ectopic neurohypophysis.

    Science.gov (United States)

    El Sanharawi, Imane; Tzarouchi, Loukia; Cardoen, Liesbeth; Martinerie, Laetitia; Leger, Juliane; Carel, Jean-Claude; Elmaleh-Berges, Monique; Alison, Marianne

    2017-05-01

    In anterior pituitary deficiency, patients with non visible pituitary stalk have more often multiple deficiencies and persistent deficiency than patients with visible pituitary stalk. To compare the diagnostic value of a high-resolution heavily T2-weighted sequence to 1.5-mm-thick unenhanced and contrast-enhanced sagittal T1-weighted sequences to assess the presence of the pituitary stalk in children with ectopic posterior pituitary gland. We retrospectively evaluated the MRI data of 14 children diagnosed with ectopic posterior pituitary gland between 2010 and 2014. We evaluated the presence of a pituitary stalk using a sagittal high-resolution heavily T2-weighted sequence and a 1.5-mm sagittal T1-weighted turbo spin-echo sequence before and after contrast medium administration. A pituitary stalk was present on at least one of the sequences in 10 of the 14 children (71%). T2-weighted sequence depicted the pituitary stalk in all 10 children, whereas the 1.5-mm-thick T1-weighted sequence depicted 2/10 (20%) before contrast injection and 8/10 (80%) after contrast injection (P=0.007). Compared with 1.5-mm-thick contrast-enhanced T1-weighted sequences, high-resolution heavily T2-weighted sequence demonstrates better sensitivity in detecting the pituitary stalk in children with ectopic posterior pituitary gland, suggesting that contrast injection is unnecessary to assess the presence of a pituitary stalk in this setting.

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Yokota, Tokunobu.

    1990-01-01

    A fuel assembly used in a FBR type nuclear reactor comprises a plurality of fuel rods and a moderator guide member (water rod). A moderator exit opening/closing mechanism is formed at the upper portion of the moderator guide member for opening and closing a moderator exit. In the initial fuel charging operation cycle to the reactor, the moderator exit is closed by the moderator exit opening/closing mechanism. Then, voids are accumulated at the inner upper portion of the moderator guide member to harden spectrum and a great amount of plutonium is generated and accumulated in the fuel assembly. Further, in the fuel re-charging operation cycle, the moderator guide member is used having the moderator exit opened. In this case, voids are discharged from the moderator guide member to decrease the ratio, and the plutonium accumulated in the initial charging operation cycle is burnt. In this way, the fuel economy can be improved. (I.N.)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Kawai, Mitsuo.

    1988-01-01

    Purpose: To reduce the corrosion rate and suppress the increase of radioactive corrosion products in reactor water of nuclear fuel assemblies for use in BWR type reactors having spacer springs made of nickel based deposition reinforced type alloys. Constitution: Spacer rings made of nickel based deposition reinforced type alloy are incorporated and used as fuel assemblies after applying treatment of dipping and maintaining at high temperature water followed by heating in steams. Since this can remove the nickel leaching into reactor water at the initial stage, Co-58 as the radioactive corrosion products in the reactor water can be reduced, and the operation at in-service inspection or repairement can be facilitated to improve the working efficiency of the nuclear power plant. The dipping time is desirably more than 10 hours and more desirably more than 30 hours. (Horiuchi, T. )

  17. Fuel assembly

    International Nuclear Information System (INIS)

    Watanabe, Shoichi; Hirano, Yasushi.

    1998-01-01

    A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

  18. Effect of Piper betel leaf stalk extract on protein metabolism in reproductive tissues of male albino rats

    OpenAIRE

    V Vengaiah; A Govardhan Naik; C Changamma

    2015-01-01

    Objective: To know the impact of Piper betel leaf stalk (P. betel) extract on Protein and energy metabolism and its role in male albino rats. Methods: Healthy adult (3-4 months old) male Wistar strain albino rats were administered with betel leaf stalk extract, at the dose of 50 mg/kg/day through oral gavages for 15 days. Twenty four hours after the last dose, the animals were autopsied. In order to assess antifertility effect in testis, epididymis, seminal vesicle and prostate gland, esti...

  19. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    5th April, 2016 – Ordinary General Assembly of the Staff Association! In the first semester of each year, the Staff Association (SA) invites its members to attend and participate in the Ordinary General Assembly (OGA). This year the OGA will be held on Tuesday, April 5th 2016 from 11:00 to 12:00 in BE Auditorium, Meyrin (6-2-024). During the Ordinary General Assembly, the activity and financial reports of the SA are presented and submitted for approval to the members. This is the occasion to get a global view on the activities of the SA, its financial management, and an opportunity to express one’s opinion, including taking part in the votes. Other points are listed on the agenda, as proposed by the Staff Council. Who can vote? Only “ordinary” members (MPE) of the SA can vote. Associated members (MPA) of the SA and/or affiliated pensioners have a right to vote on those topics that are of direct interest to them. Who can give his/her opinion? The Ordinary General Asse...

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Sei; Ando, Ryohei; Mitsutake, Toru.

    1995-01-01

    The present invention concerns a fuel assembly suitable to a BWR-type reactor and improved especially with the nuclear characteristic, heat performance, hydraulic performance, dismantling or assembling performance and economical property. A part of poison rods are formed as a large-diameter/multi-region poison rods having a larger diameter than a fuel rod. A large number of fuel rods are disposed surrounding a large diameter water rod and a group of the large-diameter/multi-region poison rods in adjacent with the water rod. The large-diameter water rod has a burnable poison at the tube wall portion. At least a portion of the large-diameter poison rods has a coolant circulation portion allowing coolants to circulate therethrough. Since the large-diameter poison rods are disposed at a position of high neutron fluxes, a large neutron multiplication factor suppression effect can be provided, thereby enabling to reduce the number of burnable poison rods relative to fuels. As a result, power peaking in the fuel assembly is moderated and a greater amount of plutonium can be loaded. In addition the flow of cooling water which tends to gather around the large diameter water rod can be controlled to improve cooling performance of fuels. (N.H.)

  1. [Phenolic foam prepared by lignin from a steam-explosion derived biorefinery of corn stalk].

    Science.gov (United States)

    Wang, Guanhua; Chen, Hongzhang

    2014-06-01

    To increase the integral economic effectiveness, biorefineries of lignocellulosic materials should not only utilize carbohydrates hydrolyzed from cellulose and hemicellulose but also use lignin. We used steam-exploded corn stalk as raw materials and optimized the temperature and alkali concentration in the lignin extraction process to obtain lignin liquor with higher yield and purity. Then the concentrated lignin liquor was used directly to substitute phenol for phenolic foam preparation and the performances of phenolic foam were characterized by microscopic structure analysis, FTIR, compression strength and thermal conductivity detection. The results indicated that, when steam-exploded corn stalk was extracted at 120 degrees C for 2 h by 1% NaOH with a solid to liquid ratio of 1:10, the extraction yield of lignin was 79.67%. The phenolic foam prepared from the concentrated lignin liquor showed higher apparent density and compression strength with the increasing substitution rate of lignin liquor. However, there were not significant differences of thermal conductivity and flame retardant properties by the addition of lignin, which meant that the phenolic foam substituted by lignin liquor was approved for commercial application. This study, which uses alkali-extracted lignin liquor directly for phenolic foam preparation, provides a relatively simple way for utilization of lignin and finally increases the overall commercial operability ofa lignocellulosic biorefinery derived by steam explosion.

  2. Effect of thermal and high pressure processing on stability of betalain extracted from red beet stalks.

    Science.gov (United States)

    Dos Santos, Cláudia Destro; Ismail, Marliya; Cassini, Aline Schilling; Marczak, Ligia Damasceno Ferreira; Tessaro, Isabel Cristina; Farid, Mohammed

    2018-02-01

    Red beet stalks are a potential source of betalain, but their pigments are not widely used because of their instability. In the present work, the applicability of high pressure processing (HPP) and high temperature short time (HTST) thermal treatment was investigated to improve betalain stability in extracts with low and high concentrations. The HPP was applied at 6000 bar for 10, 20 and 30 min and HTST treatment was applied at 75.7 °C for 80 s, 81.1 °C for 100 s and 85.7 °C for 120 s, HPP treatment did not show any improvement in the betalain stability. In turn, the degradation rate of the control and the HTST thermal treatment at 85.7 °C for 120 s of the sample with high initial betalain concentration were 1.2 and 0.4 mg of betanin/100 ml of extract per day respectively. Among the treatments studied, HTST was considered the most suitable to maintain betalain stability from red beet stalks.

  3. Rhamnolipid Biosurfactant against Fusarium verticillioides to Control Stalk and Ear Rot Disease of Maize

    Directory of Open Access Journals (Sweden)

    Siddhartha Narayan Borah

    2016-09-01

    Full Text Available Antifungal activity of rhamnolipids (RLs has been widely studied against many plant pathogenic fungi, but not against Fusarium verticillioides, a major pathogen of maize (Zea mays L.. F. verticillioides causes stalk and ear rot of maize or asymptomatically colonizes the plant and ears resulting in moderate to heavy crop loss throughout the world. F. verticillioides produces fumonisin mycotoxins, reported carcinogens, which makes the contaminated ears unsuitable for consumption. In this study, the RL produced using glucose as sole carbon source was characterized by FTIR and LCMS analyses and its antifungal activity against F. verticillioides was evaluated in vitro on maize stalks and seeds. Further, the effect of RL on the mycelia of F. verticillioides was investigated by scanning electron microscopy which revealed visible damage to the mycelial structure as compared to control samples. In planta, treatment of maize seeds with a RL concentration of 50 mg l-1 resulted in improved biomass and fruiting compared to those of healthy control plants and complete suppression of characteristic disease symptoms and colonization of maize by F. verticillioides. The study highlights the potential of RLs to be used for an effective biocontrol strategy against colonization of maize plant by F. verticillioides.

  4. Modification of Sorghum Starch-Cellulose Bioplastic with Sorghum Stalks Filler

    Directory of Open Access Journals (Sweden)

    Yuli Darni

    2017-05-01

    Full Text Available This study evaluated the feasibility of bioplastics production by various ratio of sorghum starch and cellulose from red seaweed Eucheuma spinossum, and the use of glycerol as plasticizer and sorghum stalks as filler. Solid-liquid matrix transition should be far over the operating temperature of gelatinization and extracted at 95oC in order to avoid the loss of conductivity. The analyzed variables were starch and cellulose seaweed Eucheuma spinossum and the addition of variation of filler. Sorghum stalk could be expected to affect the mechanical and physical properties of bioplastics. A thin sheet of plastic (plastic film was obtained as a result that have been tested mechanically to obtain the best condition for the formulation of starch-cellulose 8.5:1.5 (g/g. From the result of morphological studies, the fillers in the mixture composites were more randomly in each product and the addition of filler can increase mechanical properties of bioplastics. Chemical modification had a major effect on the mechanical properties. The phenomena of degradation and thermoplasticization were visible at chemical changes that can be observed in FTIR spectrum test results.

  5. Ethanol production from concentrated food waste hydrolysates with yeast cells immobilized on corn stalk

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Shoubao [Huainan Normal Univ., Anhui (China). School of Life Science; Chen, Xiangsong; Wu, Jingyong; Wang, Pingchao [Chinese Academy of Sciences, Hefei (China). Key Lab. of Ion Beam Bio-engineering of Inst. of Plasma Physics

    2012-05-15

    The aim of the present study was to examine ethanol production from concentrated food waste hydrolysates using whole cells of S. cerevisiae immobilized on corn stalks. In order to improve cell immobilization efficiency, biological modification of the carrier was carried out by cellulase hydrolysis. The results show that proper modification of the carrier with cellulase hydrolysis was suitable for cell immobilization. The mechanism proposed, cellulase hydrolysis, not only increased the immobilized cell concentration, but also disrupted the sleek surface to become rough and porous, which enhanced ethanol production. In batch fermentation with an initial reducing sugar concentration of 202.64 {+-} 1.86 g/l, an optimal ethanol concentration of 87.91 {+-} 1.98 g/l was obtained using a modified corn stalk-immobilized cell system. The ethanol concentration produced by the immobilized cells was 6.9% higher than that produced by the free cells. Ethanol production in the 14th cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in an immobilized cell reactor, the maximum ethanol concentration of 84.85 g/l, and the highest ethanol yield of 0.43 g/g (of reducing sugar) were achieved at hydraulic retention time (HRT) of 3.10 h, whereas the maximum volumetric ethanol productivity of 43.54 g/l/h was observed at a HRT of 1.55 h. (orig.)

  6. Stalk and sucrose yield in response to nitrogen fertilization of sugarcane under reduced tillage

    Directory of Open Access Journals (Sweden)

    Caio Fortes

    2013-01-01

    Full Text Available The objective of this work was to evaluate the agroindustrial production of sugarcane (millable stalks and sucrose yield after successive nitrogen fertilizations of plant cane and ratoons in a reduced tillage system. The experiment was carried out at Jaboticabal, SP, Brazil, on a Rhodic Eutrustox soil, during four consecutive crop cycles (March 2005 to July 2009. Plant cane treatments consisted of N-urea levels (control, 40, 80, and 120 kg ha-1 N + 120 kg ha-1 P2O5 and K2O in furrow application. In the first and second ratoons, the plant cane plots were subdivided in N-ammonium nitrate treatments (control, 50, 100, and 150 kg ha-1 N + 150 kg ha-1 K2O as top dressing over rows. In the third ratoon, N fertilization was leveled to 100 kg ha-1 in all plots, including controls, to detect residual effects of previous fertilizations on the last crop's cycle. Sugarcane ratoon was mechanically harvested. A weighing truck was used to evaluate stalk yield (TCH, and samples were collected in the field for analysis of sugar content (TSH. Increasing N doses and meteorological conditions promote significant responses in TCH and TSH in cane plant and ratoons, in the average and accumulated yield of the consecutive crop cycles.

  7. Maize Cob Rot in Kenya and Its Association with Stalk Borer Damage

    International Nuclear Information System (INIS)

    Ajanga, S.I.

    2002-01-01

    Cob rots are a major cause of crop loss in areas such as western Kenya that experience prolonged rainfall during the period of crop maturation. Cob rot fungi cause spoilage of the grain and some of them produce mycotoxins which can pose a health risk to humans and animals consuming foods prepared from contaminate grain. survey conducted in western Kenya in 1998 showed that cob rot incidence exceeded 20%. In the following year when rainfall was greater around the harvest period, cob rot fungi affected 68% of cobs. in 1998 stalk borer larvae (mainly Busseola fusca) damaged 20% of the cobs and there was a strong correlation (R= 0.87) between cob rot incidence and borer damage. In 1999 almost half of the cobs sampled showed evidence of borer damage. The result indicate that the high cob rot incidence in this pert of Kenya is due to stalk bore damage, which predisposes the cobs to fungal infection, and that management of the borer would greatly decrease cob rot incidence

  8. Saccharification of sunflower stalks using lignocellulases from a fungal consortium comprising Pholiota adiposa and Armillaria gemina.

    Science.gov (United States)

    Ramachandran, Priyadharshini; Kim, Tae-Su; Dhiman, Saurabh Sudha; Li, Jinglin; Park, Ji-Hyun; Choi, Joon-Ho; Kim, Jae Young; Kim, Dongwook; Lee, Jung-Kul

    2015-09-01

    Lignocellulases from Armillaria gemina and Pholiota adiposa are efficient in hydrolyzing aspen and poplar biomass, respectively. In the present study, lignocellulosic enzymes obtained from a fungal consortium comprising P. adiposa and A. gemina were used for the saccharification of sunflower stalks. Sunflower stalks were thermochemically pretreated using 2 % NaOH at 50 °C for 24 h. The saccharification process parameters including substrate concentration, enzyme loading, pH, and temperature were optimized using response surface methodology to improve the saccharification yield. The highest enzymatic hydrolysis (84.3 %) was obtained using the following conditions: enzyme loading 10 FPU/g-substrate, substrate 5.5 %, temperature 50 °C, and pH 4.5. The hydrolysis yield obtained using the enzymes from the fungal consortium was equivalent to that obtained using a mixture of commercial enzymes Celluclast and Novozyme β-glucosidase. Addition of up to 500 ppm of heavy metal ions (As, Cu, Fe, Mn, Ni, Pb, and Zn) during saccharification did not significantly affect the saccharification yield. Thus, the biomass grown for phytoremediation of heavy metals can be used for the production of reducing sugars followed by ethanol fermentation.

  9. Pituitary stalk interruption syndrome presenting as short stature: a case report.

    Science.gov (United States)

    Ram, Nanik; Ali, Syed Ahsan; Hussain, Syed Zubair

    2014-12-19

    Pituitary stalk interruption syndrome is a rare congenital abnormality of the pituitary that is responsible for anterior pituitary deficiency. It is characterized by a classic triad of interrupted pituitary stalk, absent or ectopic posterior pituitary, and anterior pituitary hypoplasia or aplasia. Clinical presentation varies according to age. In adults it presents as short stature and anterior pituitary deficiency. Without early diagnosis and treatment, mortality and morbidity in these patients is high. Early diagnosis and treatment of this rare disease can prevent permanent short statue of the patient. We report the first case of pituitary stalk interruption syndrome from Pakistan. A 17-year-old Pakistani young man presented with short stature and underdeveloped secondary sexual characters. His siblings and parents were healthy, with normal height. An examination showed his blood pressure was 90/60 mmHg, and his height, weight, and body mass index were 142 cm, 34.5 kg, and 17.10 kg/m2, respectively. He had no hair growth on his face, axilla, or pubis. His testes were between 1 and 2 mL in size, with a 4 cm-at-stretch micropenis. His lab investigations showed that his thyroid stimulating hormone (TSH) was 8.58 uIU/mL (0.4 to 4.2), his free thyroid hormone level FT4 was 0.46 ng/dL (0.89 to 1.76), his prolactin was 21.1 ng/mL (3.0 to 14.7), and his baseline cortisol was 0.30 ug/dL (4.3 to 22.4). His cortisol level after 60 minutes of cosyntropin injection was 3.5 ug/dL (4.3 to 22.4), his insulin like growth factor IGF-1 was 31.56 ng/mL (247.3 to 481.7), his testosterone level was under 2.5 ng/dL (2 to 800), his follicle stimulating hormone FSH was 0.41 uIU/mL (0.0 to 10.0), and his leutinizing hormone LH was under 0.1 uIU/mL (1.2 to 7.8). His bone age was 10 years according to the Greulich and Pyle method, as shown by X-rays. The results from his pituitary magnetic resonance imaging scan were consistent with pituitary stalk interruption syndrome. We describe a young

  10. Fuel assembly

    International Nuclear Information System (INIS)

    Fujibayashi, Toru.

    1970-01-01

    Herein disclosed is a fuel assembly in which a fuel rod bundle is easily detachable by rotating a fuel rod fastener rotatably mounted to the upper surface of an upper tie-plate supporting a fuel bundle therebelow. A locking portion at the leading end of each fuel rod protrudes through the upper tie-plate and is engaged with or separated from the tie-plate by the rotation of the fastener. The removal of a desired fuel rod can therefore be remotely accomplished without the necessity of handling pawls, locking washers and nuts. (Owens, K.J.)

  11. Assembling consumption

    DEFF Research Database (Denmark)

    Assembling Consumption marks a definitive step in the institutionalisation of qualitative business research. By gathering leading scholars and educators who study markets, marketing and consumption through the lenses of philosophy, sociology and anthropology, this book clarifies and applies...... the investigative tools offered by assemblage theory, actor-network theory and non-representational theory. Clear theoretical explanation and methodological innovation, alongside empirical applications of these emerging frameworks will offer readers new and refreshing perspectives on consumer culture and market...... societies. This is an essential reading for both seasoned scholars and advanced students of markets, economies and social forms of consumption....

  12. Prediction of postoperative diabetes insipidus using morphological hyperintensity patterns in the pituitary stalk on magnetic resonance imaging after transsphenoidal surgery for sellar tumors.

    Science.gov (United States)

    Hayashi, Yasuhiko; Kita, Daisuke; Watanabe, Takuya; Fukui, Issei; Sasagawa, Yasuo; Oishi, Masahiro; Tachibana, Osamu; Ueda, Fumiaki; Nakada, Mitsutoshi

    2016-12-01

    Diabetes insipidus (DI) remains a complication of transsphenoidal surgery (TSS) for sellar and parasellar tumors. Antidiuretic hormone (ADH) appears as hyper intensity (HI) in the pituitary stalk and the posterior lobe of the pituitary gland on T1-weighted magnetic resonance (MR) imaging. Its disappearance from the posterior lobe occurs with DI, indicating a lack of ADH. The appearance of HI in the pituitary stalk indicates disturbances in ADH transport. This retrospective study included 172 patients undergoing TSS for sellar tumors at our institute from 2006 to 2014. Sequential T1-weighted MR images without enhancement were evaluated for HI in the pituitary stalk and the posterior lobe to assess the localization of ADH before and at intervals after TSS. DI was assessed pre- and postoperatively. HI in the pituitary stalk showed the following morphology: (1) ovoid in the distal end of the pituitary stalk (group A), (2) linear in the distal part of the pituitary stalk (group B), (3) linear in the whole pituitary stalk (group C). Preoperative DI occurred in 6 patients (3.5 %) with no HI observed in the posterior lobe. Postoperative DI was transient in 82 patients (47.7 %), and permanent in 11 (6.4 %). One week after surgery, HI was absent in the posterior lobe in 74 patients (43.0 %), and present in the pituitary stalk in 99 patients (57.6 %); both were significantly correlated with postoperative DI (p < 0.001). The absence of HI in the posterior lobe (A, 48.9 %; B, 68.3 %; C, 92.3 %), persistence of DI (A, 3.7 days; B, 45.9 days; C, 20.5 months), and duration until HI recovery in the posterior lobe (A, 3.6 months; B, 6.8 months; C, 22.9 months) were greatest in group C, followed by group B, and then group A. Fourteen group A patients did not have postoperative DI despite having HI in the pituitary stalk and the posterior lobe. Four group C patients developed permanent DI with persistence HI in the pituitary stalk. HI in the pituitary stalk and its

  13. Production of charcoal briquettes from cotton stalk in malawi: methodology for feasibility studies using experiences in Sudan

    NARCIS (Netherlands)

    Onaji, P.B.; Siemons, R.V.

    1993-01-01

    The feasibility of charcoal production from cotton stalks in Malawi was studied based on experience from Sudan. The country relies considerably on biomass fuels. Of the total energy consumption in Malawi of 2.376 MTOE in 1989, 92% was met by biomass (fuelwood: 83.6% and charcoal: 8.3% Petroleum

  14. Modeling of kinetics of Cr(VI) sorption onto grape stalk waste in a stirred batch reactor

    International Nuclear Information System (INIS)

    Escudero, Carlos; Fiol, Nuria; Poch, Jordi; Villaescusa, Isabel

    2009-01-01

    Recently, Cr(VI) removal by grape stalks has been postulated to follow two mechanisms, adsorption and reduction to trivalent chromium. Nevertheless, the rate at which both processes take place and the possible simultaneity of both processes has not been investigated. In this work, kinetics of Cr(VI) sorption onto grape stalk waste has been studied. Experiments were carried out at different temperatures but at a constant pH (3 ± 0.1) in a stirred batch reactor. Results showed that three steps take place in the process of Cr(VI) sorption onto grape stalk waste: Cr(VI) sorption, Cr(VI) reduction to Cr(III) and the adsorption of the formed Cr(III). Taking into account the evidences above mentioned, a model has been developed to predict Cr(VI) sorption on grape stalks on the basis of (i) irreversible reduction of Cr(VI) to Cr(III) reaction, whose reaction rate is assumed to be proportional to the Cr(VI) concentration in solution and (ii) adsorption and desorption of Cr(VI) and formed Cr(III) assuming that all the processes follow Langmuir type kinetics. The proposed model fits successfully the kinetic data obtained at different temperatures and describes the kinetics profile of total, hexavalent and trivalent chromium. The proposed model would be helpful for researchers in the field of Cr(VI) biosorption to design and predict the performance of sorption processes.

  15. Registration of an oilseed sunflower germplasm line HA-BSR1 highly tolerant to Sclerotinia basal stalk rot

    Science.gov (United States)

    Basal stalk rot (BSR) caused by Sclerotinia sclerotiorum (Lib.) de Bary is a devastating disease that causes a significant damage to worldwide sunflower (Helianthus annuus L.) production by reducing seed yield and quality. The objective of this research was to develop highly BSR tolerant sunflower g...

  16. The subcellular distribution of the human ribosomal "stalk" components: P1, P2 and P0 proteins

    DEFF Research Database (Denmark)

    Tchórzewski, Marek; Krokowski, Dawid; Rzeski, Wojciech

    2003-01-01

    The ribosomal "stalk" structure is a distinct lateral protuberance located on the large ribosomal subunit in prokaryotic, as well as in eukaryotic cells. In eukaryotes, this ribosomal structure is composed of the acidic ribosomal P proteins, forming two hetero-dimers (P1/P2) attached...

  17. Determining the minimum conditions for soda-anthraquinone pulping of kenaf bast, core, and whole stalk fibers

    Science.gov (United States)

    James S. Han; Thomas A. Rymsza

    1999-01-01

    Chemical pulping of kenaf fiber is comparatively new. In this study, bast, core, and whole stalk kenaf fibers were pulped using a soda-AQ pulping process and various pulping conditions. Handsheets were evaluated for density, Canadian standard freeness, brightness, opacity, smoothness, and tensile, burst, and tear indexes and strength. The results indicate that...

  18. Metrology for ITER Assembly

    International Nuclear Information System (INIS)

    Bogusch, E.

    2006-01-01

    The overall dimensions of the ITER Tokamak and the particular assembly sequence preclude the use of conventional optical metrology, mechanical jigs and traditional dimensional control equipment, as used for the assembly of smaller, previous generation, fusion devices. This paper describes the state of the art of the capabilities of available metrology systems, with reference to the previous experience in Fusion engineering and in other industries. Two complementary procedures of transferring datum from the primary datum network on the bioshield to the secondary datum s inside the VV with the desired accuracy of about 0.1 mm is described, one method using the access directly through the ports and the other using transfer techniques, developed during the co-operation with ITER/EFDA. Another important task described is the development of a method for the rapid and easy measurement of the gaps between sectors, required for the production of the customised splice plates between them. The scope of the paper includes the evaluation of the composition and cost of the systems and team of technical staff required to meet the requirements of the assembly procedure. The results from a practical, full-scale demonstration of the methodologies used, using the proposed equipment, is described. This work has demonstrated the feasibility of achieving the necessary accuracies for the successful building of ITER. (author)

  19. Fuel assembly

    International Nuclear Information System (INIS)

    Kurihara, Kunitoshi; Azekura, Kazuo.

    1992-01-01

    In a reactor core of a heavy water moderated light water cooled pressure tube type reactor, no sufficient effects have been obtained for the transfer width to a negative side of void reactivity change in a region of a great void coefficient. Then, a moderation region divided into upper and lower two regions is disposed at the central portion of a fuel assembly. Coolants flown into the lower region can be discharged to the cooling region from an opening disposed at the upper end portion of the lower region. Light water flows from the lower region of the moderator region to the cooling region of the reactor core upper portion, to lower the void coefficient. As a result, the reactivity performance at low void coefficient, i.e., a void reaction rate is transferred to the negative side. Thus, this flattens the power distribution in the fuel assembly, increases the thermal margin and enables rapid operaiton and control of the reactor core, as well as contributes to the increase of fuel burnup ratio and reduction of the fuel cycle cost. (N.H.)

  20. Fuel assembly

    International Nuclear Information System (INIS)

    Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

    1998-01-01

    The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

  1. Fuel assembly

    International Nuclear Information System (INIS)

    Fushimi, Atsushi; Shimada, Hidemitsu; Aoyama, Motoo; Nakajima, Junjiro

    1998-01-01

    In a fuel assembly for an n x n lattice-like BWR type reactor, n is determined to 9 or greater, and the enrichment degree of plutonium is determined to 4.4% by weight or less. Alternatively, n is determined to 10 or greater, and the enrichment degree of plutonium is determined to 5.2% by weight or less. An average take-out burnup degree is determined to 39GWd/t or less, and the matrix is determined to 9 x 9 or more, or the average take-out burnup degree is determined to 51GWd/t, and the matrix is determined to 10 x 10 or more and the increase of the margin of the maximum power density obtained thereby is utilized for the compensation of the increase of distortion of power distribution due to decrease of the kinds of plutonium enrichment degree, thereby enabling to reduce the kind of the enrichment degree of MOX fuel rods to one. As a result, the manufacturing step for fuel pellets can be simplified to reduce the manufacturing cost for MOX fuel assemblies. (N.H.)

  2. General Assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : 1- Adoption de l’ordre du jour. 2- Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. 3- Présentation et approbation du rapport d’activités 2014. 4- Présentation et approbation du rapport financier 2014. 5- Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. 6- Programme 2015. 7- Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. 8- Pas de modifications aux Statuts de l'Association du personnel proposée. 9- Élections des membres de la Commission é...

  3. General Assembly

    CERN Multimedia

    Staff Association

    2017-01-01

    Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 avril 2016. Présentation et approbation du rapport d’activités 2016. Présentation et approbation du rapport financier 2016. Présentation et approbation du rapport des vérificateurs aux comptes pour 2016. Programme de travail 2017. Présentation et approbation du projet de budget 2017 Approbation du taux de cotisation pour 2018. Modifications aux Statuts de l'Association du personnel proposées. Élections des membres de la Commission électorale. Élections des vérifica...

  4. General Assembly

    CERN Multimedia

    Staff Association

    2016-01-01

    Mardi 5 avril à 11 h 00 BE Auditorium Meyrin (6-2-024) Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 5 mai 2015. Présentation et approbation du rapport d’activités 2015. Présentation et approbation du rapport financier 2015. Présentation et approbation du rapport des vérificateurs aux comptes pour 2015. Programme de travail 2016. Présentation et approbation du projet de budget 2016 Approbation du taux de cotisation pour 2017. Modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commissio...

  5. General assembly

    CERN Multimedia

    Staff Association

    2015-01-01

    Mardi 5 mai à 11 h 00 Salle 13-2-005 Conformément aux statuts de l’Association du personnel, une Assemblée générale ordinaire est organisée une fois par année (article IV.2.1). Projet d’ordre du jour : Adoption de l’ordre du jour. Approbation du procès-verbal de l’Assemblée générale ordinaire du 22 mai 2014. Présentation et approbation du rapport d’activités 2014. Présentation et approbation du rapport financier 2014. Présentation et approbation du rapport des vérificateurs aux comptes pour 2014. Programme 2015. Présentation et approbation du projet de budget 2015 et taux de cotisation pour 2015. Pas de modifications aux Statuts de l'Association du personnel proposée. Élections des membres de la Commission électorale. &am...

  6. Fuel assembly

    International Nuclear Information System (INIS)

    Nomata, Terumitsu.

    1993-01-01

    Among fuel pellets to be loaded to fuel cans of a fuel assembly, fuel pellets having a small thermal power are charged in a region from the end of each of spacers up to about 50mm on the upstream of coolants that flow vertically at the periphery of fuel rods. Coolants at the periphery of fuel rods are heated by the heat generation, to result in voids. However, since cooling effect on the upstream of the spacers is low due to influences of the spacers. Further, since the fuel pellets disposed in the upstream region have small thermal power, a void coefficient is not increased. Even if a thermal power exceeding cooling performance should be generated, there is no worry of causing burnout in the upstream region. Even if burnout should be caused, safety margin and reliability relative to burnout are improved, to increase an allowable thermal power, thereby enabling to improve integrity and reliability of fuel rods and fuel assemblies. (N.H.)

  7. Shea meal and cotton stalk as potential fuels for co-combustion with coal.

    Science.gov (United States)

    Munir, S; Nimmo, W; Gibbs, B M

    2010-10-01

    The efficient management of waste biomass is an important environmental problem in agricultural countries. Often land-fill is the main disposal route with ramifications including CH(4) release having 21 times greater global warming potential per molecule than CO(2). Biomasses are considered to be CO(2)-neutral fuels when combusted. Moreover, they are renewable and covered by the renewable obligation scheme and eligible for certificates in the UK. The overall objective of the investigation is to assess the performance of selected biomass and coal co-firing under two different modes of operation, air-staging and fuel-staging with the benefit of reduced-NO(x) and SO(2) emissions in power plant. The biomasses chosen for the study, shea meal (SM) and cotton stalk (CS) have very different cellulose/lignin compositions and different reported thermal behaviour. A series of experiments have been carried out in a 20 kW, down fired combustor using coal, shea meal-coal and cotton stalk-coal blends under un-staged, air-staged and fuel-staged co-combustion configurations. For air-staging, an optimum value of primary zone stoichiometry SR(1)=0.9 was found. Keeping it fixed, the shea meal and cotton stalk content in the coal-biomass blends was set to 5%, 10% and 15% on thermal basis. NO reductions of 51% and 60% were achieved using SM and CS, respectively, with an optimum thermal biomass blending ratio (BBR) of 10%. The results obtained were compared with un-staged and air-staged results for coal without the addition of biomass. Similarly for fuel-staging, keeping the length of the reburn and burnout zone fixed, SM and CS were evaluated as reductive fuel using different reburn fuel fractions (R(ff)) of 5%, 10%, 15% and 20%. NO reductions of 83% and 84% were obtained with an optimum R(ff) of 15% with an optimum reburn zone stoichiometry of SR(2)=0.8 for both SM and CS, respectively. SO(2) reduction and char burnout efficiency were also evaluated. It was found that addition of

  8. Antifertility effect of betal leaf stalk (Tambul patrabrint): a preliminary experimental study.

    Science.gov (United States)

    Tewari, P V; Chaturvedi, C; Dixit, S N

    1970-01-01

    This study was undertaken to determine possible antifertility properties of the stalk of the betel plant, Piper betle, which is extensively cultivated in warm moist parts of India for its leaves. The thin stalks were dried, powdered, and extracted with alcohol; the residue was used in the study and named betel leaf stalk extract (BLSE). It was macerated with gum acacia, suspended in distilled water, and diluted to 25 mg/ml. The drug was fed by oral intubation. Initially 20 rats were used in 2 groups, one receiving BLSE 50 mg/kg body weight for 10 days and the other vehicle only. Both were caged with males for 15 days. Only 2 of 10 rats receiving BLSE gave birth to litters while 9 of 10 controls delivered. Number of pups was also reduced. In another experiment using 60 female rats to 30 while BLSE at 50 mg/100 gm body weight was fed for 3 days during diestrus to 30 while 30 controls received vehicle only. Successful mating was confirmed by sperm in vaginal smears. 8 of 30 treated rats delivered 3.5 pups each while 29 of 30 controls delivered 7 pups per rat. In a third experiment 10 female rats were given BLSE 50mg/100 gm body weight, 10 vehicle only, and 10 neoclinesterol 150 mcg/100 gm body weight for 4 consecutive days. On Day 5 the animals were sacrificed and weights of uterus and ovaries recorded. Antiestrogenic properties were studied in oophorectomized rats given stilbestrol 150 mcg/100 gm body weight by injection, then fed 150 mcg/100 gm body weight of neoclinesterol or BLSE, 50 mg/100 gm, but the neoclinesterol. Vaginal smears were examined for cornification on Days 2, 3, and 4. Progestational activity was studied in 12 immature female rabbits injected with stilbestrol then treated with BLSE or leutocycline. Tests for estrogenic and antiestrogenic activity of BLSE were negative. A mild progestational activity was found in immature estrogen-primed rabbits but some follicle depressant type action was noted as several graffian follicles were seen in their

  9. Ordinary General Assembly

    CERN Multimedia

    Staff Association

    2010-01-01

    Tuesday 20 April at 10.00 Council Chamber, Bldg 503 In conformity with the Statutes of the Staff Association, an ordinary General Assembly is organized once a year (article IV.2.1). Agenda   Adoption of the Agenda Approval of the Draft Minutes of the Ordinary General Assembly of 12 May 2009 Presentation and approval of the Activity Report 2009 Presentation and approval of the Financial Report 2009 Presentation and approval of the Auditors Report 2009 Programme for 2010 Presentation et and approval of the draft budget and subscription rate 2010 Election of the Election Committee Election of the Board of Auditors Miscellaneous We remind members of article IV.3.4 in the Statutes of the Association which reads: “After having dealt with all the items on the agenda, the members may, with the consent of the Assembly, have other matters discussed, but decisions may be taken only on the items listed on the agenda. Nevertheless, the Assembly may require t...

  10. Study on loading coefficient in steam explosion process of corn stalk.

    Science.gov (United States)

    Sui, Wenjie; Chen, Hongzhang

    2015-03-01

    The object of this work was to evaluate the effect of loading coefficient on steam explosion process and efficacy of corn stalk. Loading coefficient's relation with loading pattern and material property was first revealed, then its effect on transfer process and pretreatment efficacy of steam explosion was assessed by established models and enzymatic hydrolysis tests, respectively, in order to propose its optimization strategy for improving the process economy. Results showed that loading coefficient was mainly determined by loading pattern, moisture content and chip size. Both compact loading pattern and low moisture content improved the energy efficiency of steam explosion pretreatment and overall sugar yield of pretreated materials, indicating that they are desirable to improve the process economy. Pretreatment of small chip size showed opposite effects in pretreatment energy efficiency and enzymatic hydrolysis performance, thus its optimization should be balanced in investigated aspects according to further techno-economical evaluation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Removal of cadmium(II) from aqueous solution by corn stalk graft copolymers.

    Science.gov (United States)

    Zheng, Liuchun; Dang, Zhi; Zhu, Chaofei; Yi, Xiaoyun; Zhang, Hui; Liu, Congqiang

    2010-08-01

    Corn stalk was modified using graft copolymerization to produce absorbent (AGCS), which was characterized by elemental analysis, fourier transform infrared, X-ray diffraction, solid-state CP/MAS (13)C NMR spectra, thermogravimetric analysis and differential scanning calorimeter. AGCS, having cyano group (-CN) after grafted successfully, exhibits more high adsorption potential for Cd(II) than unmodified forms. The efficiency of AGCS for removal of cadmium ions was evaluated. Factors affecting Cd(II) adsorption such as pH value and adsorbent dosage were investigated. More than 90% removal was achieved at pH 3.0-7.0 and the adsorption increased from 16.0% to 99.2% with increase of adsorbent dose. In addition, two isotherm models, namely, Langmuir and Freunlich were also analyzed to determine the best fit equation for adsorption of Cd(II) on AGCS. (c) 2010 Elsevier Ltd. All rights reserved.

  12. Chemical constituents from roots and leaf stalks of acai (Euterpe precatoria Mart., Arecaceae)

    International Nuclear Information System (INIS)

    Galotta, Ana Lucia Queiroz de Assis; Boaventura, Maria Amelia Diamantino

    2005-01-01

    Phytochemical investigation of the hexane, ethyl acetate and methanolic extracts of roots and leaf stalks of Euterpe precatoria Mart. (acai), afforded stigmast-4-en-6β-ol-3-one (3); p-hydroxy benzoic acid (4); 3β-O-D-glucopyranosyl-sitosterol (5); β-sitosterol palmitate (6); mixtures of β-sitosterol and stigmasterol (1 and 2), α-, β-amyrin and lupeol (7, 8 and 9), friedelin-3-one and 28-hydroxy-friedelin-3-one (10 and 11) and α-, β-D-glucose (12, 13). Except for 1, 2 and 4, the other isolated constituents are described in the genus for the first time. Compounds 3 and 5 gave good results in the brine shrimp bioassay, which detects compounds with potential uses as antitumor agents, pesticides, etc.. (author)

  13. Pyrolysis of corn stalk biomass briquettes in a scaled-up microwave technology.

    Science.gov (United States)

    Salema, Arshad Adam; Afzal, Muhammad T; Bennamoun, Lyes

    2017-06-01

    Pyrolysis of corn stalk biomass briquettes was carried out in a developed microwave (MW) reactor supplied with 2.45GHz frequency using 3kW power generator. MW power and biomass loading were the key parameters investigated in this study. Highest bio-oil, biochar, and gas yield of 19.6%, 41.1%, and 54.0% was achieved at different process condition. In terms of quality, biochar exhibited good heating value (32MJ/kg) than bio-oil (2.47MJ/kg). Bio-oil was also characterised chemically using FTIR and GC-MS method. This work may open new dimension towards development of large-scale MW pyrolysis technology. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Removal of insecticide carbofuran from aqueous solutions by banana stalks activated carbon

    International Nuclear Information System (INIS)

    Salman, J.M.; Hameed, B.H.

    2010-01-01

    In this work, activated carbon was prepared from banana stalks (BSAC) waste to remove the insecticide carbofuran from aqueous solutions. The effects of contact time, initial carbofuran concentration, solution pH and temperature (30, 40 and 50 deg. C) were investigated. Adsorption isotherm, kinetics and thermodynamics of carbofuran on BSAC were studied. Equilibrium data were fitted to the Langmuir, Freundlich and Temkin isotherm models and the data best represented by the Langmuir isotherm. Thermodynamic parameters such as standard enthalpy (ΔH o ), standard entropy (ΔS o ) and standard free energy (ΔG o ) were evaluated. Regeneration efficiency of spent BSAC was studied using ethanol as a solvent. The efficiency was found to be in the range of 96.97-97.35%. The results indicated that the BSAC has good regeneration and reusability characteristics and can be used as alternative to present commercial activated carbon.

  15. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto; Ogiya, Shunsuke.

    1989-01-01

    For improving the economy of a BWR type reactor by making the operation cycle longer, the fuel enrichment degree has to be increased further. However, this makes the subcriticality shallower in the upper portion of the reactor core, to bring about a possibility that the reactor shutdown becomes impossible. In the present invention, a portion of fuel rod is constituted as partial length fuel rods (P-fuel rods) in which the entire stack length in the effective portion is made shorter by reducing the concentration of fissionable materials in the axial portion. A plurality of moderator rods are disposed at least on one diagonal line of a fuel assembly and P-fuel rods are arranged at a position put between the moderator rods. This makes it possible to reactor shutdown and makes the axial power distribution satisfactory even if the fuel enrichment degree is increased. (T.M.)

  16. Fuel assembly

    International Nuclear Information System (INIS)

    Bando, Masaru.

    1993-01-01

    As neutron irradiation progresses on a fuel assembly of an FBR type reactor, a strong force is exerted to cause ruptures if the arrangement of fuel elements is not displaced, whereas the fuel elements may be brought into direct contact with each other not by way of spacers to cause burning damages if the arrangement is displaced. In the present invention, the circumference of fuel elements arranged in a normal triangle lattice is surrounded by a wrapper tube having a hexagonal cross section, wire spacers are wound therearound, and deformable spacers are distributed to optional positions for fuel elements in the wrapper tube. Interaction between the fuel elements caused by irradiation is effectively absorbed, thereby enabling to delay the occurrence of the rupture and burning damages of the elements. (N.H.)

  17. Fuel assembly

    International Nuclear Information System (INIS)

    Ueda, Makoto.

    1991-01-01

    In a fuel assembly in which spectral shift type moderator guide members are arranged, the moderator guide member has a flow channel resistance member, that provides flow resistance against the moderators, in the upstream of a moderator flowing channel, by which the ratio of removing coolants is set greater at the upstream than downstream. With such a constitution, the void distribution increasing upward in the channel box except for the portion of the moderator guide member is moderated by the increase of the area of the void region that expands downward in the guide member. Accordingly, the axial power distribution is flattened throughout the operation cycle and excess distortion is eliminated to improve the fuel integrity. (T.M.)

  18. Fuel assembly

    International Nuclear Information System (INIS)

    Ishibashi, Yoko; Aoyama, Motoo; Oyama, Jun-ichi.

    1995-01-01

    Burnable poison-incorporating fuel rods of a first group are disposed in a region in adjacent with a water rod having a large diameter (neutron moderator rod) disposed to the central portion of a fuel assembly. Burnable poison-incorporating fuel rods of a second group are disposed to a region other than peripheral zone in adjacent with a channel box and corners positioned at an inner zone, in adjacent with the channel box. The average concentration of burnable poisons of the burnable poison-incorporating fuel rods of the first group is made greater than that of the second group. With such a constitution, when the burnable poisons of the first group are burnt out, the burnable poisons of the second group are also burnt out at the same time. Accordingly, an amount of burnable poisons left unburnt at the final stage of the operation cycle is reduced, to improve the reactivity. This can improve the economical property. (I.N.)

  19. Fuel assemblies

    International Nuclear Information System (INIS)

    Yoshioka, Ritsuo.

    1983-01-01

    Purpose: To improve the operation performance of a BWR type reactor by improving the distribution of the uranium enrichment and the incorporation amount of burnable poisons in fuel assemblies. Constitution: The average enrichment of uranium 235 is increased in the upper portion as compared with that in the lower portion, while the incorporation amount of burnable poisons is increased in an upper portion as compared with that in the lower portion. The difference in the incorporation amount of the burnable poisons between the upper and lower portions is attained by charging two kinds of fuel rods; the ones incorporated with the burnable poisons over the entire length and the others incorporated with the burnable poisons only in the upper portions. (Seki, T.)

  20. Biological Control of Fusarium Stalk Rot of Maize Using Bacillus spp

    Directory of Open Access Journals (Sweden)

    Joon-Hee Han

    2015-12-01

    Full Text Available Maize (Zea mays L. is an economically important crop in worldwide. While the consumption of the maize is steadily increasing, the yield is decreasing due to continuous mono-cultivation and infection of soil-borne fungal pathogens such as Fusarium species. Recently, stalk rot disease in maize, caused by F. subglutinans and F. temperatum has been reported in Korea. In this study, we isolated bacterial isolates in rhizosphere soil of maize and subsequently tested for antagonistic activities against F. subglutinans and F. temperatum. A total of 1,357 bacterial strains were isolated from rhizosphere. Among them three bacterial isolates (GC02, GC07, GC08 were selected, based on antagonistic effects against Fusarium species. The isolates GC02 and GC07 were most efficient in inhibiting the mycelium growth of the pathogens. The three isolates GC02, GC07 and GC08 were identified as Bacillus methylotrophicus, B. amyloliquefaciens and B. thuringiensis using 16S rRNA sequence analysis, respectively. GC02 and GC07 bacterial suspensions were able to suppress over 80% conidial germination of the pathogens. GC02, GC07 and GC08 were capable of producing large quantities of protease enzymes, whereas the isolates GC07 and GC08 produced cellulase enzymes. The isolates GC02 and GC07 were more efficient in phosphate solubilization and siderophore production than GC08. Analysis of disease suppression revealed that GC07 was most effective in suppressing the disease development of stalk rot. It was also found that B. methylotrophicus GC02 and B. amyloliquefaciens GC07 have an ability to inhibit the growth of other plant pathogenic fungi. This study indicated B. methylotrophicus GC02 and B. amyloliquefaciens GC07 has potential for being used for the development of a biological control agent.

  1. Harassment, stalking, threats and attacks targeting New Zealand politicians: A mental health issue.

    Science.gov (United States)

    Every-Palmer, Susanna; Barry-Walsh, Justin; Pathé, Michele

    2015-07-01

    Due to the nature of their work, politicians are at greater risk of stalking, harassment and attack than the general population. The small, but significantly elevated risk of violence to politicians is predominantly due not to organised terrorism or politically motivated extremists but to fixated individuals with untreated serious mental disorders, usually psychosis. Our objective was to ascertain the frequency, nature and effects of unwanted harassment of politicians in New Zealand and the possible role of mental illness in this harassment. New Zealand Members of Parliament were surveyed, with an 84% response rate (n = 102). Quantitative and qualitative data were collected on Parliamentarians' experiences of harassment and stalking. Eighty-seven percent of politicians reported unwanted harassment ranging from disturbing communications to physical violence, with most experiencing harassment in multiple modalities and on multiple occasions. Cyberstalking and other forms of online harassment were common, and politicians felt they (and their families) had become more exposed as a result of the Internet. Half of MPs had been personally approached by their harassers, 48% had been directly threatened and 15% had been attacked. Some of these incidents were serious, involving weapons such as guns, Molotov cocktails and blunt instruments. One in three politicians had been targeted at their homes. Respondents believed the majority of those responsible for the harassment exhibited signs of mental illness. The harassment of politicians in New Zealand is common and concerning. Many of those responsible were thought to be mentally ill by their victims. This harassment has significant psychosocial costs for both the victim and the perpetrator and represents an opportunity for mental health intervention. © The Royal Australian and New Zealand College of Psychiatrists 2015.

  2. Adhesive proteins of stalked and acorn barnacles display homology with low sequence similarities.

    Directory of Open Access Journals (Sweden)

    Jaimie-Leigh Jonker

    Full Text Available Barnacle adhesion underwater is an important phenomenon to understand for the prevention of biofouling and potential biotechnological innovations, yet so far, identifying what makes barnacle glue proteins 'sticky' has proved elusive. Examination of a broad range of species within the barnacles may be instructive to identify conserved adhesive domains. We add to extensive information from the acorn barnacles (order Sessilia by providing the first protein analysis of a stalked barnacle adhesive, Lepas anatifera (order Lepadiformes. It was possible to separate the L. anatifera adhesive into at least 10 protein bands using SDS-PAGE. Intense bands were present at approximately 30, 70, 90 and 110 kilodaltons (kDa. Mass spectrometry for protein identification was followed by de novo sequencing which detected 52 peptides of 7-16 amino acids in length. None of the peptides matched published or unpublished transcriptome sequences, but some amino acid sequence similarity was apparent between L. anatifera and closely-related Dosima fascicularis. Antibodies against two acorn barnacle proteins (ab-cp-52k and ab-cp-68k showed cross-reactivity in the adhesive glands of L. anatifera. We also analysed the similarity of adhesive proteins across several barnacle taxa, including Pollicipes pollicipes (a stalked barnacle in the order Scalpelliformes. Sequence alignment of published expressed sequence tags clearly indicated that P. pollicipes possesses homologues for the 19 kDa and 100 kDa proteins in acorn barnacles. Homology aside, sequence similarity in amino acid and gene sequences tended to decline as taxonomic distance increased, with minimum similarities of 18-26%, depending on the gene. The results indicate that some adhesive proteins (e.g. 100 kDa are more conserved within barnacles than others (20 kDa.

  3. Degradation of corn stalk by the composite microbial system of MC1

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The composite microbial system of MC1 was used to degrade corn stalk in order to determine properties of the degraded products as well as bacterial composition of MC1. Results indicated that the pH of the fermentation broth was typical of lignocellulose degradatioin by MC1, decreasing in the early phase and increasing in later stages of the degradation. The microbial biomass peaked on the day 3 after degradation. The MC1 effeciently degraded the corn stalk by nearly 70% during which its cellulose content decreased by 71.2%, hemicellulose by 76.5% and lignin by 24.6%. The content of water-soluble carbohydrates (WSC) in the fermentation broth increased progressively during the first three days, and decreased thereafter, suggesting an accumulation of WSC in the early phase of the degradation process. Total levels of various volatile products peaked in the third day after degradation , and 7 types of volatile products were detected in the fermentation broth. These were ethanol, acetic acid, 1,2-ethanediol, propanoic acid, butanoic acid, 3-methyl-butanoic acid and glycerine. Six major compounds were quantitatively analysed and the contents of each compound were ethanol (0.584 g/L), acetic acid (0.735 g/L), 1,2-ethanediol (0.772 g/L), propanoic acid (0.026 g/L), butanoic acid (0.018 g/L) and glycerine (4.203 g/L). Characterization of bacterial cells collected from the culture solution, based on 16S rDNA PCR-DGGE analysis of DNAs, showed that the composition of bacterial community in MC1 coincided basically with observations from previous studies. This indicated that the structure of MC1 is very stable during degradation of different lignocellulose materials.

  4. Permeability transition in human mitochondria persists in the absence of peripheral stalk subunits of ATP synthase.

    Science.gov (United States)

    He, Jiuya; Carroll, Joe; Ding, Shujing; Fearnley, Ian M; Walker, John E

    2017-08-22

    The opening of a nonspecific channel, known as the permeability transition pore (PTP), in the inner membranes of mitochondria can be triggered by calcium ions, leading to swelling of the organelle, disruption of the inner membrane and ATP synthesis, and cell death. Pore opening can be inhibited by cyclosporin A mediated via cyclophilin D. It has been proposed that the pore is associated with the dimeric ATP synthase and the oligomycin sensitivity conferral protein (OSCP), a component of the enzyme's peripheral stalk, provides the site at which cyclophilin D interacts. Subunit b contributes a central α-helical structure to the peripheral stalk, extending from near the top of the enzyme's catalytic domain and crossing the membrane domain of the enzyme via two α-helices. We investigated the possible involvement of the subunit b and the OSCP in the PTP by generating clonal cells, HAP1-Δb and HAP1-ΔOSCP, lacking the membrane domain of subunit b or the OSCP, respectively, in which the corresponding genes, ATP5F1 and ATP5O , had been disrupted. Both cell lines preserve the characteristic properties of the PTP; therefore, the membrane domain of subunit b does not contribute to the PTP, and the OSCP does not provide the site of interaction with cyclophilin D. The membrane subunits ATP6, ATP8, and subunit c have been eliminated previously from possible participation in the PTP; thus, the only subunits of ATP synthase that could participate in pore formation are e, f, g, diabetes-associated protein in insulin-sensitive tissues (DAPIT), and the 6.8-kDa proteolipid.

  5. A new stalked filter-feeder from the middle Cambrian Burgess Shale, British Columbia, Canada.

    Directory of Open Access Journals (Sweden)

    Lorna J O'Brien

    Full Text Available Burgess Shale-type deposits provide invaluable insights into the early evolution of body plans and the ecological structure of Cambrian communities, but a number of species, continue to defy phylogenetic interpretations. Here we extend this list to include a new soft-bodied animal, Siphusauctum gregarium n. gen. and n. sp., from the Tulip Beds (Campsite Cliff Shale Member, Burgess Shale Formation of Mount Stephen (Yoho National Park, British Columbia. With 1,133 specimens collected, S. gregarium is clearly the most abundant animal from this locality.This stalked animal (reaching at least 20 cm in length, has a large ovoid calyx connected to a narrow bilayered stem and a small flattened or bulb-like holdfast. The calyx is enclosed by a flexible sheath with six small openings at the base, and a central terminal anus near the top encircled by indistinct openings. A prominent organ, represented by six radially symmetrical segments with comb-like elements, surrounds an internal body cavity with a large stomach, conical median gut and straight intestine. Siphusauctum gregarium was probably an active filter-feeder, with water passing through the calyx openings, capturing food particles with its comb-like elements. It often occurs in large assemblages on single bedding planes suggesting a gregarious lifestyle, with the animal living in high tier clusters. These were probably buried en masse more or less in-situ by rapid mud flow events.Siphusauctum gregarium resembles Dinomischus, another Cambrian enigmatic stalked animal. Principal points of comparison include a long stem with a calyx containing a visceral mass and bract-like elements, and a similar lifestyle albeit occupying different tiering levels. The presence in both animals of a digestive tract with a potential stomach and anus suggest a grade of organization within bilaterians, but relationships with extant phyla are not straightforward. Thus, the broader affinities of S. gregarium remain

  6. DNA controlled assembly of liposomes

    DEFF Research Database (Denmark)

    Vogel, Stefan; Jakobsen, Ulla; Simonsen, Adam Cohen

    2009-01-01

    DNA-encoding of solid nanoparticles requires surfacechemistry, which is often tedious and not generally applicable. In the present study non-covalently attached DNA are used to assemble soft nanoparticles (liposomes) in solution. This process displays remarkably sharp thermal transitions from...... assembled to disassembled state for which reason this method allows easy and fast detection of polynucleotides (e.g. DNA or RNA), including single nucleotide polymorphisms as well as insertions and deletions....

  7. Fuel assembly

    International Nuclear Information System (INIS)

    Hirukawa, Koji; Sakurada, Koichi.

    1992-01-01

    In a fuel assembly for a BWR type reactor, water rods or water crosses are disposed between fuel rods, and a value with a spring is disposed at the top of the coolant flow channel thereof, which opens a discharge port when pressure is increased to greater than a predetermined value. Further, a control element for the amount of coolant flow rate is inserted retractable to a control element guide tube formed at the lower portion of the water rod or the water cross. When the amount of control elements inserted to the control element guide tube is small and the inflown coolant flow rate is great, the void coefficient at the inside of the water rod is less than 5%. On the other hand, when the control elements are inserted, the flow resistance is increased, so that the void coefficient in the water rod is greater than 80%. When the pressure in the water rod is increased, the valve with the spring is raised to escape water or steams. Then, since the variation range of the change of the void coefficient can be controlled reliably by the amount of the control elements inserted, and nuclear fuel materials can be utilized effectively. (N.H.)

  8. Fuel assembly

    International Nuclear Information System (INIS)

    Hiraiwa, Koji; Ueda, Makoto

    1989-01-01

    In a fuel assembly used for a light water cooled reactor such as a BWR type reactor, a water rod is divided axially into an upper outer tube and a lower outer tube by means of a plug disposed from the lower end of a water rod to a position 1/4 - 1/2 of the entire length for the water rod. Inlet apertures and exit apertures for moderators are respectively perforated for the divided outer tube and upper and lower portions. Further, an upper inner tube with less neutron irradiation growing amount than the outer tube is perforated on the plug in the outer tube, while a lower inner tube with greater neutron irradiation growing amount than the outer tube is suspended from the lower surface of the plug in the outer tube. Then, the opening area for the exit apertures disposed to the upper outer tube and the lower outer tube is controlled depending on the difference of the neutron irradiation growing amount between the upper inner tube and the upper outer tube, and the difference of the neutron irradiation growing amount between the lower inner tube and the lower outer tube. This enables effective spectral shift operation and improve the fuel economy. (T.M.)

  9. Fuel assembly

    International Nuclear Information System (INIS)

    Yamazaki, Hajime.

    1995-01-01

    In a fuel assembly having fuel rods of different length, fuel pellets of mixed oxides of uranium and plutonium are loaded to a short fuel rod. The volume ratio of a pellet-loaded portion to a plenum portion of the short fuel rod is made greater than the volume ratio of a fuel rod to which uranium fuel pellets are loaded. In addition, the volume of the plenum portion of the short fuel rod is set greater depending on the plutonium content in the loaded fuel pellets. MOX fuel pellets are loaded on the short fuel rods having a greater degree of freedom relevant to the setting for the volume of the plenum portion compared with that of a long rod fuel, and the volume of the plenum portion is ensured greater depending on the plutonium content. Even if a large amount of FP gas and He gas are discharged from the MOX fuels compared with that from the uranium fuels, the internal pressure of the MOX fuel rod during operation is maintained substantially identical with that of the uranium fuel rod, so that a risk of generating excess stresses applied to the fuel cladding tubes and rupture of fuels are greatly reduced. (N.H.)

  10. Fuel assembly

    International Nuclear Information System (INIS)

    Nakajima, Akiyoshi; Bessho, Yasunori; Aoyama, Motoo; Koyama, Jun-ichi; Hirakawa, Hiromasa; Yamashita, Jun-ichi; Hayashi, Tatsuo

    1998-01-01

    In a fuel assembly of a BWR type reactor in which a water rod of a large diameter is disposed at the central portion, the cross sectional area perpendicular to the axial direction comprises a region a of a fuel rod group facing to a wide gap water region to which a control rod is inserted, a region b of a fuel rod group disposed on the side of the wide gap water region other than the region a, a region d of a fuel rod group facing to a narrow gap water region and a region c of a fuel rod group disposed on the side of the narrow gap water region other than the region d. When comparing an amount of fission products contained in the four regions relative to that in the entire regions and average enrichment degrees of fuel rods for the four regions, the relative amount and the average enrichment degree of the fuel rod group of the region a is minimized, and the relative amount and the average enrichment degree of the fuel rod group in the region b is maximized. Then, reactor shut down margin during cold operation can be improved while flattening the power in the cross section perpendicular to the axial direction. (N.H.)

  11. Effect of Different Parts (Leaf, Stem and Stalk) and Seasons (Summer and Winter) on the Chemical Compositions and Antioxidant Activity of Moringa oleifera

    Science.gov (United States)

    Shih, Ming-Chih; Chang, Cheng-Ming; Kang, Sue-Ming; Tsai, Min-Lang

    2011-01-01

    Moringa oleifera, Lam. (Moringaceae) is grown world-wide in the tropics and sub-tropics of Asia and Africa and contains abundant various nutrients. This study describes the effect of different parts (leaf, stem and stalk) and seasons (summer and winter) on the chemical compositions and antioxidant activity of M. oleifera grown in Taiwan. The results showed that the winter samples of Moringa had higher ash (except the stalk part), calcium and phenolic compounds (except the leaf part) and stronger antioxidative activity than summer samples. The methanolic extract of Moringa showed strong scavenging effect of DPPH radicals and reducing power. The trend of antioxidative activity as a function of the part of Moringa was: leaf > stem > stalk for samples from both seasons investigated. The Moringa extract showed strong hydrogen peroxide scavenging activity and high Superoxide Dismutase (SOD) activity except the stalk part. PMID:22016645

  12. ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Gorpani, B.

    2000-01-01

    into the cask unloading pool. In the cask unloading pool the DPC is removed from the cask and placed in an overpack and the DPC lid is severed and removed. Assemblies are removed from either an open cask or DPC and loaded into assembly baskets positioned in the basket staging rack in the assembly unloading pool. A method called ''blending'' is utilized to load DCs with a heat output of less than 11.8 kW. This involves combining hotter and cooler assemblies from different baskets. Blending requires storing some of the hotter fuel assemblies in fuel-blending inventory pools until cooler assemblies are available. The assembly baskets are then transferred from the basket staging rack to the assembly handling cell and loaded into the assembly drying vessels. After drying, the assemblies are removed from the assembly drying vessels and loaded into a DC positioned below the DC load port. After installation of a DC inner lid and temporary sealing device, the DC is transferred to the DC decontamination cell where the top area of the DC, the DC lifting collar, and the DC inner lid and temporary sealing device are decontaminated, and the DC is evacuated and backfilled with inert gas to prevent prolonged clad exposure to air. The DC is then transferred to the Disposal Container Handling System for lid welding. In another cask preparation and decontamination area, lids are replaced on the empty transportation casks and DPC overpacks, the casks and DPC overpacks are decontaminated, inspected, and transferred to the Carrier/Cask Handling System for shipment off-site. All system equipment is designed to facilitate manual or remote operation, decontamination, and maintenance. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks and DPCs. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling

  13. Anatomic Dissection of Arachnoid Membranes Encircling the Pituitary Stalk on Fresh, Non-Formalin-Fixed Specimens: Anatomoradiologic Correlations and Clinical Applications in Craniopharyngioma Surgery.

    Science.gov (United States)

    Ciappetta, Pasqualino; Pescatori, Lorenzo

    2017-12-01

    The anatomy of the arachnoid membranes and cisternal spaces around the pituitary stalk has not been yet exhaustively described and understood. In this study, we performed a detailed anatomic study on fresh, non-formalin-fixed cadavers of the arachnoid membranes encircling the pituitary stalk and correlate our anatomic findings with magnetic resonance imaging (MRI). Ten fresh, non-formalin-fixed, non-silicon-injected adult cadaveric heads were analyzed in this study. The membrane and cisterns that were studied for our study were as follows: 1) the diaphragma sellae and its dural components; 2) the basal arachnoid membrane; 3) the Liliequist membrane with its diencephalic and mesencephalic portion; 4) the medial carotid membrane; 5) the chiasmatic cistern; and 6) the pituitary stalk. MRI examinations of the sellar region were performed in 15 healthy volunteers (9 men, mean age 40 years; and 6 women mean age, 37 years) to visualize the arachnoid membrane encircling the pituitary stalk. MRI examinations were performed with a 3-T unit. A 3-dimensional constructive interference in steady state pulse magnetic resonance sequence was used. All the membranes examined were visualized clearly in all the dissections performed. Their 3-dimensional organization around the pituitary stalk was clarified and confirmed by MRI. Our study gives a detailed description of the pituitary stalk arachnoid sheets on fresh, non-formalin-fixed cadavers. This technique allowed us to clearly identify a funnel-shaped arachnoid collar encircling the pituitary stalk and delimiting a distinct cisternal space belonging to the stalk itself. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Endoscopic endonasal approach for craniopharyngioma: the importance of the relationship between pituitary stalk and tumor.

    Science.gov (United States)

    Dho, Yun-Sik; Kim, Yong Hwy; Se, Young-Bem; Han, Doo Hee; Kim, Jung Hee; Park, Chul-Kee; Wang, Kyu-Chang; Kim, Dong Gyu

    2017-09-29

    OBJECTIVE The endoscopic endonasal approach (EEA) is commonly used for the treatment of craniopharyngioma; therefore, it is essential to analyze outcomes in order to understand the benefits and drawbacks. The goal of this paper was to evaluate the clinical features and outcomes associated with this treatment approach. METHODS From July 2010 to March 2016, 82 adult craniopharyngioma patients underwent an EEA at the authors' institution. Of these cases, intraoperative records and immediate postoperative MR images were available for 68 patients. The patients underwent systemized endocrinological evaluation. Eighteen of 68 patients who underwent EEA for recurrence or regrowth of residual lesions after previous surgical management were excluded in the analysis of the anatomical tumor classification. The authors retrospectively analyzed preoperative clinical features and previous anatomical classifications, focusing on the relationship of the pituitary stalk and tumor, to determine predictive factors for the clinical outcome, such as the extent of resection, visual function, endocrinological function, recurrence rate, and complications. RESULTS The mean tumor size was 2.5 cm (3.1 cm for primary tumors and 1.9 cm for recurrent lesions). Gross-total resection (GTR) was achieved in 62 (91.1%) patients (48 [96.0%] patients with primary tumors and 14 [77.8%] patients with recurrent tumors). The rate of GTR was higher in the primary group than in the group with recurrence (p = 0.038). The overall pre- and postoperative visual impairment scale (VIS) scores were 40.8 and 22.1, respectively (50.9 and 14.3 in the primary group and 30.7 and 29.9 in patients with recurrence, respectively). The improvement rate in VIS score was higher in the primary group than in the recurrent group (p = 0.001). Endocrinological function was improved in 4 patients (5.9%) and deteriorated in 32 of 68 patients (47.1%). Tumor invasion into the center of the pituitary stalk affected the postoperative

  15. Pituitary stalk transection syndrome: Comparison of clinico-radiological features in adults and children with review of literature

    International Nuclear Information System (INIS)

    Kulkarni, Chinmay; Moorthy, Srikanth; Pullara, Sreekumar K; Rajeshkannan, R; Unnikrishnan, Ambika G

    2012-01-01

    Hypo-pituitarism results from impaired production of one or more of anterior pituitary trophic hormones. A rare cause of hypo-pituitarism is pituitary stalk transection syndrome. The MRI features of this condition in children and its association with hormonal deficiencies have been reported earlier. Reports on adults with this disorder are scarce, with only one small case series published in the recent literature. We studied the hormonal deficiency pattern and MRI findings of 12 patients with pituitary stalk transection syndrome who presented to our department between 2004 and 2011. Six patients were children and six were adults (≥18 years). This article compares the adult clinico-radiological phenotype of pituitary transection syndrome with the pediatric group of patients with same condition

  16. Central diabetes insipidus as a very late relapse limited to the pituitary stalk in Langerhans cell histiocytosis.

    Science.gov (United States)

    Nakagawa, Shunsuke; Shinkoda, Yuichi; Hazeki, Daisuke; Imamura, Mari; Okamoto, Yasuhiro; Kawakami, Kiyoshi; Kawano, Yoshifumi

    2016-07-01

    Central diabetes insipidus (CDI) and relapse are frequently seen in multifocal Langerhans cell histiocytosis (LCH). We present two females with multifocal LCH who developed CDI 9 and 5 years after the initial diagnosis, respectively, as a relapse limited to the pituitary stalk. Combination chemotherapy with cytarabine reduced the mass in the pituitary stalk. Although CDI did not improve, there has been no anterior pituitary hormone deficiency (APHD), neurodegenerative disease in the central nervous system (ND-CNS) or additional relapse for 2 years after therapy. It was difficult to predict the development of CDI in these cases. CDI might develop very late in patients with multifocal LCH, and therefore strict follow-up is necessary, especially with regard to symptoms of CDI such as polydipsia and polyuria. For new-onset CDI with LCH, chemotherapy with cytarabine might be useful for preventing APHD and ND-CNS.

  17. Optimization of pulsed electric field pre-treatments to enhance health-promoting glucosinolates in broccoli flowers and stalk.

    Science.gov (United States)

    Aguiló-Aguayo, Ingrid; Suarez, Manuel; Plaza, Lucia; Hossain, Mohammad B; Brunton, Nigel; Lyng, James G; Rai, Dilip K

    2015-07-01

    The effect of pulsed electric field (PEF) treatment variables (electric field strength and treatment time) on the glucosinolate content of broccoli flowers and stalks was evaluated. Samples were subjected to electric field strengths from 1 to 4 kV cm(-1) and treatment times from 50 to 1000 µs at 5 Hz. Data fitted significantly (P broccoli flowers (ranging from 187.1 to 212.5%) and stalks (ranging from 110.6 to 203.0%) respectively. The predicted values from the developed quadratic polynomial equation were in close agreement with the actual experimental values, with low average mean deviations (E%) ranging from 0.59 to 8.80%. The use of PEF processing at moderate conditions could be a suitable method to stimulate production of broccoli with high health-promoting glucosinolate content. © 2014 Society of Chemical Industry.

  18. Analysis of membrane fusion as a two-state sequential process: evaluation of the stalk model.

    Science.gov (United States)

    Weinreb, Gabriel; Lentz, Barry R

    2007-06-01

    We propose a model that accounts for the time courses of PEG-induced fusion of membrane vesicles of varying lipid compositions and sizes. The model assumes that fusion proceeds from an initial, aggregated vesicle state ((A) membrane contact) through two sequential intermediate states (I(1) and I(2)) and then on to a fusion pore state (FP). Using this model, we interpreted data on the fusion of seven different vesicle systems. We found that the initial aggregated state involved no lipid or content mixing but did produce leakage. The final state (FP) was not leaky. Lipid mixing normally dominated the first intermediate state (I(1)), but content mixing signal was also observed in this state for most systems. The second intermediate state (I(2)) exhibited both lipid and content mixing signals and leakage, and was sometimes the only leaky state. In some systems, the first and second intermediates were indistinguishable and converted directly to the FP state. Having also tested a parallel, two-intermediate model subject to different assumptions about the nature of the intermediates, we conclude that a sequential, two-intermediate model is the simplest model sufficient to describe PEG-mediated fusion in all vesicle systems studied. We conclude as well that a fusion intermediate "state" should not be thought of as a fixed structure (e.g., "stalk" or "transmembrane contact") of uniform properties. Rather, a fusion "state" describes an ensemble of similar structures that can have different mechanical properties. Thus, a "state" can have varying probabilities of having a given functional property such as content mixing, lipid mixing, or leakage. Our data show that the content mixing signal may occur through two processes, one correlated and one not correlated with leakage. Finally, we consider the implications of our results in terms of the "modified stalk" hypothesis for the mechanism of lipid pore formation. We conclude that our results not only support this hypothesis but

  19. Characteristic and kinetics of corn stalk pyrolysis in a high pressure reactor and steam gasification of its char

    OpenAIRE

    Zhang, Guojie; Sun, Yinghui; Shi, Yuliang; Jia, Yong; Xu, Ying; Zhao, Peiyu; Zhang, Yongfa

    2016-01-01

    Pyrolysis characteristics of the corn stalk were investigated at different temperatures and pressures, with focus mainly on the releasing profiles and forming behaviors of gas. The results show that a higher pressure was conducive to the yield of H2 and CH4, and was not conducive to the generation of CO. Combustible gas components increase with the increase temperature. H2 concentration was affected significantly by temperature, was mainly released at higher temperatures (>500 °C). At 700 °C,...

  20. Selected Abiotic and Biotic Environmental Stress Factors Affecting Two Economically Important Sugarcane Stalk Boring Pests in the United States

    Directory of Open Access Journals (Sweden)

    Allan T. Showler

    2016-02-01

    Full Text Available Sugarcane, Saccharum spp., in the United States is attacked by a number of different arthropod pests. The most serious among those pests are two stalk boring moths in the Family Crambidae: the sugarcane borer, Diatraea saccharalis (F., and the Mexican rice borer, Eoreuma loftini (Dyar. The two species are affected by abiotic and biotic environmental stress factors. Water deficit and excessive soil nitrogen alter physical and physiochemical aspects of the sugarcane plant that make the crop increasingly vulnerable to E. loftini. Weed growth can be competitive with sugarcane but it also supports enhanced abundances and diversity of natural enemies that can suppress infestations of D. saccharalis. In an instance where the stalk borer is considered a stress factor, proximity of vulnerable crops to sugarcane can influence levels of E. loftini infestation of sugarcane. The adverse effects of each stress factor, in terms of stalk borer attack, can be reduced by adopting appropriate cultural practices, such as adequate irrigation, judicious use of nitrogen fertilizer, using noncompetitive weed growth, and not planting vulnerable crops near sugarcane fields. Understanding the relationships between stress factors and crop pests can provide valuable insights for plant breeders and tools for incorporation into integrated pest management strategies.

  1. Influence of steaming explosion time on the physic-chemical properties of cellulose from Lespedeza stalks (Lespedeza crytobotrya).

    Science.gov (United States)

    Wang, Kun; Jiang, Jian-Xin; Xu, Feng; Sun, Run-Cang

    2009-11-01

    The synergistic effect of steam explosion pretreatment and sodium hydroxide post-treatment of Lespedeza stalks (Lespedeza crytobotrya) has been investigated in this study. In this case, Lespedeza stalks were firstly exploded at a fixed steam pressure (22.5 kg/m(2)) for 2-10 min. Then the steam-exploded Lespedeza stalks was extracted with 1 M NaOH at 50 degrees C for 3 h with a shrub to water ratio of 1:20 (g/ml), which yielded 57.3%, 53.1%, 55.4%, 52.8%, 53.2%, and 56.4% (% dry weight) cellulose rich fractions, comparing to 68.0% from non-steam-exploded material. The content of glucose in cellulose rich residues increased with increment of the steaming time and reached to 94.10% at the most severity. The similar increasing trend occurred during the dissolution of hemicelluloses. It is evident that at shorter steam explosion time, autohydrolysis mainly occurred on the hemicelluloses and the amorphous area of cellulose. The crystalline region of cellulose was depolymerized under a prolonged incubation time. The characteristics of the cellulose rich fractions in terms of FT-IR and CP/MAS (13)C NMR spectroscopy and thermal analysis were discussed, and the surface structure was also investigated by SEM.

  2. Improved enzymatic saccharification of steam exploded cotton stalk using alkaline extraction and fermentation of cellulosic sugars into ethanol.

    Science.gov (United States)

    Keshav, Praveen K; Naseeruddin, Shaik; Rao, L Venkateswar

    2016-08-01

    Cotton stalk, a widely available and cheap agricultural residue lacking economic alternatives, was subjected to steam explosion in the range 170-200°C for 5min. Steam explosion at 200°C and 5min led to significant hemicellulose solubilization (71.90±0.10%). Alkaline extraction of steam exploded cotton stalk (SECOH) using 3% NaOH at room temperature for 6h led to 85.07±1.43% lignin removal with complete hemicellulose solubilization. Besides, this combined pretreatment allowed a high recovery of the cellulosic fraction from the biomass. Enzymatic saccharification was studied between steam exploded cotton stalk (SECS) and SECOH using different cellulase loadings. SECOH gave a maximum of 785.30±8.28mg/g reducing sugars with saccharification efficiency of 82.13±0.72%. Subsequently, fermentation of SECOH hydrolysate containing sugars (68.20±1.16g/L) with Saccharomyces cerevisiae produced 23.17±0.84g/L ethanol with 0.44g/g yield. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Influence of Fiber Bundle Morphology on the Mechanical and Bonding Properties of Cotton Stalk and Mulberry Branch Reconstituted Square Lumber

    Directory of Open Access Journals (Sweden)

    Jing Zhang

    2016-08-01

    Full Text Available The mechanical properties of natural fiber composites can be strengthened in the longitudinal direction if the fiber is formed in a parallel manner. Reconstituted cotton stalk lumber and mulberry branch lumber were fabricated using hot-press technology, and the effects of fiber morphology on their mechanical and bonding properties were investigated. The fiber bundle size had a great influence on the mechanical and bonding properties of the final products. The maximum specific modulus of rupture (MOR and specific modulus of elasticity (MOE of the reconstituted lumber were obtained for medium-size fiber bundles, and the maximum MOR and MOE of reconstituted cotton stalk lumber was 130.3 MPa·g-1·cm-3 and 12.9 GPa·g-1·cm-3, respectively. The maximum MOR and MOE of the mulberry branch lumber was 147.2 MPa·g-1·cm-3 and 14.7 GPa·g-1·cm-3, respectively. Mechanical interlocking structures in the lumber were observed via fluorescence microscopy, showing that phenol-formaldehyde adhesive had penetrated into several cell layers of the fiber bundle under heating and pressure. The adhesive penetration capacity was stronger when the fiber bundles were smaller in size and density. The reconstituted lumber fabricated from both materials exhibited excellent mechanical performance in the parallel direction. Therefore, reconstituted cotton stalk and mulberry branch lumber are attractive potential materials for the construction industry.

  4. Co-composting of two-phase olive-mill pomace and poultry manure with tomato harvest stalks.

    Science.gov (United States)

    Sülük, Kemal; Tosun, İsmail; Ekinci, Kamil

    2017-04-01

    In this study, two-phase olive-mill pomace with poultry manure and chopped tomato harvest stalks were composted at different initial carbon/nitrogen (C/N) ratios with fixed free air space of 35%. Composting experiment was carried out in the 15 aerobic reactors made of stainless steel and was monitored for 28 days. During the composting process, temperature, moisture content, organic matter (OM), pH, electrical conductivity, oxygen and carbon dioxide concentrations, total carbon, total nitrogen, ammonium nitrogen ([Formula: see text]), nitrate nitrogen ([Formula: see text]), and total phosphorus were monitored. Compost mass and volume changes were determined at the beginning, during remixings, and at the end of composting. While the stabilization period took less time for the mixtures containing a high amount of poultry manure, the mixtures having the high portion of two-phase olive-mill pomace took a longer time due to the structure of olive stone and its lignin content. Dry matter loss (range: 18.1-34.0%.) in the mixtures increased with an increase in the share of poultry manure and tomato stalks in the initial mixture. OM loss (range: 21.7-46.1%) for tomato stalks (measured separately) during composting increased due to an increase in the ratio of poultry manure in the initial mixtures.

  5. Extraction and HPLC analysis of phenolic compounds in leaves, stalks, and textile fibers of Urtica dioica L.

    Science.gov (United States)

    Pinelli, Patrizia; Ieri, Francesca; Vignolini, Pamela; Bacci, Laura; Baronti, Silvia; Romani, Annalisa

    2008-10-08

    In the present study the phenolic composition of leaves, stalks, and textile fiber extracts from Urtica dioica L. is described. Taking into account the increasing demand for textile products made from natural fibers and the necessity to create sustainable "local" processing chains, an Italian project was funded to evaluate the cultivation of nettle fibers in the region of Tuscany. The leaves of two nettle samples, cultivated and wild (C and W), contain large amounts of chlorogenic and 2- O-caffeoylmalic acid, which represent 71.5 and 76.5% of total phenolics, respectively. Flavonoids are the main class in the stalks: 54.4% of total phenolics in C and 31.2% in W samples. Anthocyanins are second in quantitative importance and are present only in nettle stalks: 28.6% of total phenolics in C and 24.4% in W extracts. Characterization of phenolic compounds in nettle extracts is an important result with regard to the biological properties (antioxidant and antiradical) of these metabolites for their possible applications in various industrial activities, such as food/feed, cosmetics, phytomedicine, and textiles.

  6. A novel solid state fermentation coupled with gas stripping enhancing the sweet sorghum stalk conversion performance for bioethanol

    Science.gov (United States)

    2014-01-01

    Background Bioethanol production from biomass is becoming a hot topic internationally. Traditional static solid state fermentation (TS-SSF) for bioethanol production is similar to the traditional method of intermittent operation. The main problems of its large-scale intensive production are the low efficiency of mass and heat transfer and the high ethanol inhibition effect. In order to achieve continuous production and high conversion efficiency, gas stripping solid state fermentation (GS-SSF) for bioethanol production from sweet sorghum stalk (SSS) was systematically investigated in the present study. Results TS-SSF and GS-SSF were conducted and evaluated based on different SSS particle thicknesses under identical conditions. The ethanol yield reached 22.7 g/100 g dry SSS during GS-SSF, which was obviously higher than that during TS-SSF. The optimal initial gas stripping time, gas stripping temperature, fermentation time, and particle thickness of GS-SSF were 10 h, 35°C, 28 h, and 0.15 cm, respectively, and the corresponding ethanol stripping efficiency was 77.5%. The ethanol yield apparently increased by 30% with the particle thickness decreasing from 0.4 cm to 0.05 cm during GS-SSF. Meanwhile, the ethanol yield increased by 6% to 10% during GS-SSF compared with that during TS-SSF under the same particle thickness. The results revealed that gas stripping removed the ethanol inhibition effect and improved the mass and heat transfer efficiency, and hence strongly enhanced the solid state fermentation (SSF) performance of SSS. GS-SSF also eliminated the need for separate reactors and further simplified the bioethanol production process from SSS. As a result, a continuous conversion process of SSS and online separation of bioethanol were achieved by GS-SSF. Conclusions SSF coupled with gas stripping meet the requirements of high yield and efficient industrial bioethanol production. It should be a novel bioconversion process for bioethanol production from SSS

  7. AutoAssemblyD: a graphical user interface system for several genome assemblers.

    Science.gov (United States)

    Veras, Adonney Allan de Oliveira; de Sá, Pablo Henrique Caracciolo Gomes; Azevedo, Vasco; Silva, Artur; Ramos, Rommel Thiago Jucá

    2013-01-01

    Next-generation sequencing technologies have increased the amount of biological data generated. Thus, bioinformatics has become important because new methods and algorithms are necessary to manipulate and process such data. However, certain challenges have emerged, such as genome assembly using short reads and high-throughput platforms. In this context, several algorithms have been developed, such as Velvet, Abyss, Euler-SR, Mira, Edna, Maq, SHRiMP, Newbler, ALLPATHS, Bowtie and BWA. However, most such assemblers do not have a graphical interface, which makes their use difficult for users without computing experience given the complexity of the assembler syntax. Thus, to make the operation of such assemblers accessible to users without a computing background, we developed AutoAssemblyD, which is a graphical tool for genome assembly submission and remote management by multiple assemblers through XML templates. AssemblyD is freely available at https://sourceforge.net/projects/autoassemblyd. It requires Sun jdk 6 or higher.

  8. Growth without growth hormone in combined pituitary hormone deficiency caused by pituitary stalk interruption syndrome

    Directory of Open Access Journals (Sweden)

    Sang Soo Lee

    2017-03-01

    Full Text Available Growth hormone (GH is an essential element for normal growth. However, reports of normal growth without GH have been made in patients who have undergone brain surgery for craniopharyngioma. Normal growth without GH can be explained by hyperinsulinemia, hyperprolactinemia, elevated leptin levels, and GH variants; however, its exact mechanism has not been elucidated yet. We diagnosed a female patient aged 13 with combined pituitary hormone deficiency (CPHD caused by pituitary stalk interruption syndrome (PSIS. The patient has experienced recurrent hypoglycemic seizures since birth, but reached the height of 160 cm at the age of 13, showing normal growth. She grew another 8 cm for 3 years after the diagnosis, and she reached her final adult height of 168 cm which was greater than the midparental height, at the age of 16. The patient's blood GH and insulin-like growth factor-I levels were consistently subnormal, although her insulin levels were normal. Her physical examination conducted at the age of 15 showed truncal obesity, dyslipidemia, and osteoporosis, which are metabolic features of GH deficiency (GHD. Herein, we report a case in which a PSIS-induced CPHD patient attained her final height above mid parental height despite a severe GHD.

  9. OXIDATION AND SULFOMETHYLATION OF ALKALI-EXTRACTED LIGNIN FROM CORN STALK

    Directory of Open Access Journals (Sweden)

    Huiran Wu,

    2012-05-01

    Full Text Available A lignosulfonate was prepared from alkali-extracted corn stalk lignin (AEL by oxidation under mild conditions and sulfomethylation. The oxidized AEL exhibited lower molecular weight, narrower molecular weight distribution, and higher phenolic hydroxyl content than AEL, demonstrating that oxidized AEL was more reactive than those before oxidation. The content of sulfonic groups was significantly increased with the increase in sodium sulphite to AEL ratio, while the content slightly decreased when the ratio was above 1:1. During the sulfomethylation, the content of sulfonic groups increased with time and then achieved a constant level with the increase in time. The content of sulfonic groups reached 1.29 mmol/g, the maximum value, at 5 h and a sodium sulphite to AEL ratio of 1:1. The solubility of AEL was obviously improved by sulfomethylation with the increase in the content of sulfonic groups. The surface activity of AEL was improved after sulfomethylation. The sulfomethylation products exhibited good dispersibility and showed potential for use as a dye dispersant.

  10. Effect of Pleurotus eryngii stalk residue on the oxidative status and meat quality of broiler chickens.

    Science.gov (United States)

    Lee, Tzu-Tai; Ciou, Jhih-Ying; Chiang, Ching-Jen; Chao, Yun-Peng; Yu, Bi

    2012-11-07

    Pleurotus eryngii stalk residue (PESR) is a byproduct of the edible portion of the fruiting body. The present study was conducted to evaluate the effects of PESR on the oxidative status and meat quality of broilers. Two hundred fifty 1-d-old male broilers (Arbor Acre) were evenly divided by gender and randomly allocated into control (corn-soybean meal diet) or 1.0, 5.0, 10.0, or 20.0 g/kg dried PESR groups. The results revealed that at 35 d, the dried PESR groups displayed a significantly increased water-holding capacity and decreased storage loss of breast and thigh fillets when compared to the control group. Regarding fillets color, the L* (lightness) values were lower and the a* (redness) and b* (yellowness) values were higher following dried PESR supplementation. In 5.0-20.0 g/kg PESR supplementation groups, the activities of antioxidative enzymes were significantly elevated in serum, liver, spleen, and fillet tissues when compared to control group. Additionally, malondialdehyde production was slightly decreased in the PESR supplementation groups. Lower crude fat contents were observed in fillet tissues of 5.0-20.0 g/kg PESR groups when compared with the control group. In conclusion, PESR may potentially be used as an antioxidant to decrease lipid peroxidation and improve meat quality in broilers.

  11. Optimization of pretreatment, enzymatic hydrolysis and fermentation for more efficient ethanol production by Jerusalem artichoke stalk.

    Science.gov (United States)

    Li, Kai; Qin, Jin-Cheng; Liu, Chen-Guang; Bai, Feng-Wu

    2016-12-01

    Jerusalem artichoke (JA) is a potential energy crop for biorefinery due to its unique agronomic traits such as resistance to environmental stresses and high biomass yield in marginal lands. Although JA tubers have been explored for inulin extraction and biofuels production, there is little concern on its stalk (JAS). In this article, the pretreatment of JAS by alkaline hydrogen peroxide was optimized using the response surface methodology to improve sugars yield and reduce chemicals usage. Scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis were applied to characterize the structures of the pretreated JAS to evaluate the effectiveness of the pretreatment. Furthermore, the feeding of the pretreated JAS and cellulase was performed for high solid uploading (up to 30%) to increase ethanol titer, and simultaneous saccharification and fermentation with 55.6g/L ethanol produced, 36.5% more than that produced through separate hydrolysis and fermentation, was validated to be more efficient. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Continuous ethanol production from Jerusalem artichokes stalks using immobilized cells of Kluyveromyces marxianus

    Energy Technology Data Exchange (ETDEWEB)

    Bajpai, P.; Margaritis, A.

    1986-01-01

    Continuous production of ethanol from the extract of Jerusalem artichoke stalks was investigated in a packed bed bioreactor using Kluyveromyces marxianus cells immobilized in calcium alginate gel beds. Maximum conversion of the sugars to ethanol was achieved with a yield of about 98% of the theoretical. Volumetric ethanol productivities of 102 grams of ethanol per litre per hour and 92 grams ethanol per liter per hour were obtained at 87% and 90% conversion respectively for an inlet substrate concentration of 100 gram sugars per liter. The maximum specific ethanol production rate and maximum specific total sugar uptake rate of the immobilized cells were found to be 0.96 gram ethanol per gram immobilized cells per hour and 2.06 gram sugars per gram immobilized cells per hour respectively. The immobilized cell bioreactor was run continuously at a dilution rate of 2.12 per hour for 30 days which resulted in a loss of 30% of the original activity. The half life of the bioreactor was estimated to be about 56 days.

  13. Reduced polymorphism associated with X chromosome meiotic drive in the stalk-eyed fly Teleopsis dalmanni.

    Directory of Open Access Journals (Sweden)

    Sarah J Christianson

    Full Text Available Sex chromosome meiotic drive has been suggested as a cause of several evolutionary genetic phenomena, including genomic conflicts that give rise to reproductive isolation between new species. In this paper we present a population genetic analysis of X chromosome drive in the stalk-eyed fly, Teleopsis dalmanni, to determine how this natural polymorphism influences genetic diversity. We analyzed patterns of DNA sequence variation at two X-linked regions (comprising 1325 bp approximately 50 cM apart and one autosomal region (comprising 921 bp for 50 males, half of which were collected in the field from one of two allopatric locations and the other half were derived from lab-reared individuals with known brood sex ratios. These two populations are recently diverged but exhibit partial postzygotic reproductive isolation, i.e. crosses produce sterile hybrid males and fertile females. We find no nucleotide or microsatellite variation on the drive X chromosome, whereas the same individuals show levels of variation at autosomal regions that are similar to field-collected flies. Furthermore, one field-caught individual collected 10 years previously had a nearly identical X haplotype to the drive X, and is over 2% divergent from other haplotypes sampled from the field. These results are consistent with a selective sweep that has removed genetic variation from much of the drive X chromosome. We discuss how this finding may relate to the rapid evolution of postzygotic reproductive isolation that has been documented for these flies.

  14. Microwave-assisted extraction of rutin and quercetin from the stalks of Euonymus alatus (Thunb.) Sieb.

    Science.gov (United States)

    Zhang, Fan; Yang, Yi; Su, Ping; Guo, Zhenku

    2009-01-01

    Euonymus alatus (Thunb.) has been used as one of traditional Chinese medicines for several thousand years. Conventional methods for the extraction of rutin and quercetin from E. alatus, including solvent extraction, Soxhlet extraction and heat reflux extraction are characterised by long extraction times and consumption of large amounts of solvents. To develop a simple and rapid method for the extraction of rutin and quercetin from the stalks of Euonymus alatus (Thunb.) Sieb using microwave-assisted extraction (MAE) technique. MAE experiments were performed with a multimode microwave extraction system. The experimental variables that affect the MAE process, such as the concentration of ethanol solution, extractant volume, microwave power and extraction time were optimised. Yields were determined by HPLC. The results were compared with that obtained by classical Soxhlet and ultrasonic-assisted extraction (UAE). From the optimised conditions for MAE of rutin and quercetin it can be concluded that the solvent is 50% ethanol (v/v) solution, the extractant volume is 40 mL, microwave power is 170 W and irradiation time is 6 min. Compared with Soxhlet extraction and ultrasonic extraction, microwave extraction is a rapid method with a higher yield and lower solvent consumption. The results showed that MAE can be used as an efficient and rapid method for the extraction of the active components from plants.

  15. Kinetic Study of Cotton Stalk and Rice Husk Samples under an Inert and Oxy Combustion Atmospheres

    Directory of Open Access Journals (Sweden)

    Ghulamullah Mailto

    2018-04-01

    Full Text Available Biomass materials such as CS (Cotton Stalks and RH (Rice Husk are a renewable source of energy. As biomass resources have potential to offer a uninterpted supply of biofuels through thermal decomposition processes. Nevertheless, an appropriate understanding of reaction kinetics and thermal properties of biomasses play a vital role in designing of the commercial plants using biomass as a raw material for energy generation. The kinetic characteristics of the CS and RH samples under pure nitrogen 99.9% and pure oxygen 99.9% was performed. The temperature was raised from ambient to 900oC maintaining the heating rate of 10oC/min. CS and RH decomposition was noticed in three dissimilar regions. The kinetic characteristics such as (pre-exponential factor, the order of reaction and activation energy were calculated for both selected materials. The activation energies calculated under nitrogen environment for CS and RH was 68.77 and 72.31 kJ/mole, whereas the regression coefficient (R2 was 0.9877 and 0.9731 respectively. The activation energies under oxygen environment were higher, it was 106 and 118 kJ/mole. The regression coefficient (R2 under oxygen environment was 0.9987 and 0.99883 for above sample sequence.

  16. Microbial pretreatment of cotton stalks by Phanerochaete chrysosporium for bioethanol production

    Science.gov (United States)

    Shi, Jian

    Lignocellulosic biomass has been recognized as a widespread, potentially low cost renewable source of mixed sugars for fermentation to fuel ethanol. Pretreatment, as the first step towards conversion of lignocellulose to ethanol, remains one of the main barriers to technical and commercial success of the processing technology. Existing pretreatment methods have largely been developed on the basis of physiochemical technologies which are considered relatively expensive and usually involve adverse environmental impacts. In this study, an environmentally benign alternative, microbial pretreatment using Phanerochaete chrysosporium, was explored to degrade lignin in cotton stalks and facilitate their conversion into ethanol. Two submerged liquid pretreatment techniques (SmC), shallow stationary and agitated cultivation, at three inorganic salt concentrations (no salts, modified salts without Mn2+, modified salts with Mn2+) were compared by evaluating their pretreatment efficiencies. Shallow stationary cultivation with no salt was superior to other pretreatment conditions and gave 20.7% lignin degradation along with 76.3% solids recovery and 29.0% carbohydrate availability over a 14 day period. The influence of substrate moisture content (65%, 75% and 80% M.C. wet-basis), inorganic salt concentration (no salts, modified salts without Mn2+ , modified salts with Mn2+) and culture time (0-14 days) on pretreatment effectiveness in solid state (SSC) systems was also examined. It was shown that solid state cultivation at 75% M.C. without salts was the most preferable pretreatment resulting in 27.6% lignin degradation, 71.1% solids recovery and 41.6% carbohydrate availability over a period of 14 days. A study on hydrolysis and fermentation of cotton stalks treated microbially using the most promising SmC (shallow stationary, no salts) and SSC (75% moisture content, no salts) methods resulted in no increase in cellulose conversion with direct enzyme application (10.98% and 3

  17. No detectable fertility benefit from a single additional mating in wild stalk-eyed flies.

    Directory of Open Access Journals (Sweden)

    Elisabeth Harley

    2010-12-01

    Full Text Available Multiple mating by female insects is widespread, and the explanation(s for repeated mating by females has been the subject of much discussion. Females may profit from mating multiply through direct material benefits that increase their own reproductive output, or indirect genetic benefits that increase offspring fitness. One particular direct benefit that has attracted significant attention is that of fertility assurance, as females often need to mate multiply to achieve high fertility. This hypothesis has never been tested in a wild insect population.Female Malaysian stalk-eyed flies (Teleopsis dalmanni mate repeatedly during their lifetime, and have been shown to be sperm limited under both laboratory and field conditions. Here we ask whether receiving an additional mating alleviates sperm limitation in wild females. In our experiment one group of females received a single additional mating, while a control group received an interrupted, and therefore unsuccessful, mating. Females that received an additional mating did not lay more fertilised eggs in total, nor did they lay proportionately more fertilised eggs. Female fertility declined significantly through time, demonstrating that females were sperm limited. However, receipt of an additional mating did not significantly alter the rate of this decline.Our data suggest that the fertility consequences of a single additional mating were small. We discuss this effect (or lack thereof, and suggest that it is likely to be attributed to small ejaculate size, a high proportion of failed copulations, and the presence of X-linked meiotic drive in this species.

  18. Effects of biopretreatment on pyrolysis behaviors of corn stalk by methanogen.

    Science.gov (United States)

    Wang, Tipeng; Ye, Xiaoning; Yin, Jun; Lu, Qiang; Zheng, Zongming; Dong, Changqing

    2014-07-01

    The study investigated the effects of methanogen pretreatment on pyrolysis behaviors of corn stalk (CS) by using Py-GC/MS analysis and thermogravimetric analysis. Results indicated that biopretreatment changed considerably the pyrolysis behaviors of CS from four weight loss stages to two weight loss stages. Increasing biopretreatment time from 5 days to 25 days enhanced the kinds and contents of chemicals in volatile products. In pyrolysis products, the contents of sugars, linear ketones and furans decreased from 1.43%, 12.60% and 7.38% to 1.25%, 10.22% and 3.25%, respectively, and the contents of phenols increased from 15.08% to 27.84%. The most content change from 6.83% to 13.63% indicated that methanogen pretreatment improved the pyrolysis selectivity of CS to product the 4-VP, but it was disadvantageous to 5-hydroxymethyl furfural, levoglucose and furfural. The changes of chemical compositions and structure of CS after biopretreatment were the main reason of the differences. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Adsorption of cadmium by biochar produced from pyrolysis of corn stalk in aqueous solution.

    Science.gov (United States)

    Ma, Fengfeng; Zhao, Baowei; Diao, Jingru

    2016-09-01

    The purpose of this work is to investigate adsorption characteristic of corn stalk (CS) biochar for removal of cadmium ions (Cd 2+ ) from aqueous solution. Batch adsorption experiments were carried out to evaluate the effects of pH value of solution, adsorbent particle size, adsorbent dosage, and ionic strength of solution on the adsorption of Cd 2+ onto biochar that was pyrolytically produced from CS at 300 °C. The results showed that the initial pH value of solution played an important role in adsorption. The adsorptive amount of Cd 2+ onto the biochar decreased with increasing the adsorbent dosage, adsorbent particle size, and ionic strength, while it increased with increasing the initial pH value of solution and temperature. Cd 2+ was removed efficiently and quickly from aqueous solutions by the biochar with a maximum capacity of 33.94 mg/g. The adsorption process was well described by the pseudo-second-order kinetic model with the correlation coefficients greater than 0.986. The adsorption isotherm could be well fitted by the Langmuir model. The thermodynamic studies showed that the adsorption of Cd 2+ onto the biochar was a spontaneous and exothermic process. The results indicate that CS biochar can be considered as an efficient adsorbent.

  20. KINETIC STUDY FOR THE THERMAL DECOMPOSITION OF HEMICELLULOSE ISOLATED FROM CORN STALK

    Directory of Open Access Journals (Sweden)

    Gao-Jin Lv

    2010-04-01

    Full Text Available In order to study the thermal decomposition characteristics of hemicellulose, a highly efficient procedure was carried out to extract hemicellulose from corn stalk. Several different sugar units were observed by 13C NMR spectra to show the presence and species of hemicellulose. Following isolation of the hemicellulose, experimental research on its thermal behavior were carried out with a thermogravimetric analyzer under inert atmosphere at heating rates ranging from 10 to 50°C/min, and the kinetic parameters were calculated by the Kissinger and Ozawa methods, respectively. It was found that the thermal degradation of hemicellulose mainly occurred in the temperature range 180-340°C with a final residue yield of 24% at 700°C. An increase of the heating rate could slightly increase both the temperatures at which the peak weight loss rate was observed and the maximum value of weight loss rate. The activation energy (E and the pre-exponential factor (lnA obtained by the Kissinger and Ozawa methods were 213.3kJ mol-1, 211.6kJ mol-1 and 46.2min-1, 45.9min-1, respectively. Even though the data showed little difference, the fitting degree of the Ozawa method was better than that of the Kissinger method. The experimental results and kinetic parameters may provide useful data for effective design and improvement of thermochemical conversion units.

  1. Energetic and exergetic aspects of cotton stalk production in establishing energy policies

    International Nuclear Information System (INIS)

    Hepbasli, Arif; Utlu, Zafer; Akdeniz, R. Cengiz

    2007-01-01

    Exergy analysis is important for energy resource utilization, because exergy, which is a way to a sustainable future, is a part of the energy analysis. Exergy analysis starts to play a role in several countries in developing energy policy. This paper deals with the exergetic assessment of the cotton stalk (CS) production. In this regard, Turkey, which is one of the eight countries producing 85% of the world's cotton, is given as an application country first. Energy and exergy relations used in the analysis are then presented. Finally, the Turkish CS production in 2003 is evaluated using energy and exergy analyses method, while the results obtained are discussed. The values for the net energy and exergy gained are obtained to be about 49,146 and 59,395 MJ/ha, respectively. Turkey's total energy and exergy are estimated to be 75.45 and 81.87 PJ. It may be concluded that this amount of energy is equal to 7.77% and 2.38% of Turkey's primary energy production and consumption in the same year, respectively. The overall mean energy and exergy efficiencies of the cotton production in the year studied are found to be 33.06% and 33.12%, respectively. It is also expected that the results of this study will be helpful in developing highly applicable and productive planning for energy policies

  2. Isolation and Characteristics of Cellulose and Nanocellulose from Lotus Leaf Stalk Agro-wastes

    Directory of Open Access Journals (Sweden)

    Yandan Chen

    2014-12-01

    Full Text Available Valorization of lotus leaf stalks (LLS produced as an abundantly available agro-waste was achieved through the extraction of value-added nanocellulose. Nanofibrillated cellulose (NFC was successfully prepared from LLS by using chemical pretreatment combined with high-intensity ultrasonication. The morphological characteristics of the chemically purified LLS cellulose microfibrils were characterized by optical microscopy and MorFi fiber analysis. Fourier transform infrared (FTIR spectroscopy indicated the extensive removal of non-cellulosic components after chemical pretreatment. The transmission electron microscopy (TEM results revealed agglomeration of the developed individual NFC, with a width of 20 ± 5 nm and length on a micron scale, into a network-like feature. X-ray diffraction results showed that the resulting NFC had a cellulose I crystal structure with a high crystallinity (70%. The NFC started to degrade at around 217 °C, and the peak rate of degradation occurred at 344 °C. Nanofibrils obtained from LLS have great potential as reinforcement agents in nanocomposites.

  3. Employing response surface methodology (RSM) to improve methane production from cotton stalk.

    Science.gov (United States)

    Zhang, Han; Khalid, Habiba; Li, Wanwu; He, Yanfeng; Liu, Guangqing; Chen, Chang

    2018-03-01

    China is the largest cotton producer with the cotton output accounting for 25% of the total world's cotton production. A large quantity of cotton stalk (CS) waste is generated which is burned and causes environmental and ecological problems. This study investigated the anaerobic digestibility of CS by focusing on improving the methane yield by applying central composite design of response surface methodology (RSM). The purpose of this study was to determine the best level of factors to optimize the desired output of methane production from CS. Thus, it was necessary to describe the relationship of many individual variables with one or more response values for the effective utilization of CS. The influences of feed to inoculum (F/I) ratio and organic loading (OL) on methane production were investigated. Results showed that the experimental methane yield (EMY) and volatile solid (VS) removal were calculated to be 70.22 mL/gVS and 14.33% at F/I ratio of 0.79 and organic loading of 25.61 gVS/L, respectively. Characteristics of final effluent showed that the anaerobic system was stable. This research laid a foundation for future application of CS to alleviate the problems of waste pollution and energy output.

  4. BIOSORPTION OF MN (II IONS FROM AQUEOUS SOLUTION BY JERUSALEM ARTICHOKE (HELIANTHUS TUBEROSUS L. STALKS

    Directory of Open Access Journals (Sweden)

    Tsvetko PROKOPOV

    2017-09-01

    Full Text Available The purpose of this paper is to tested Jerusalem artichoke stalks as a cheap biosorbent for its ability to remove Mn (II ions from aqueous solution. Batch experiments were carried out to evaluate the effects of pH, biosorbent particle size, dosage, initial metal concentration and contact time. The maximum removal efficiency of about 97.0 % was reached at pH 8.0 by using of biosorbent particle size 530-850  m, adsorbent dosage 30 g/L, initial metal concentration 10 mg/L, temperature 20 oC, agitation speed 120 rpm and contact time 90 min. Pseudo-first order and pseudo-second order models were applied to describe the obtained kinetic data. The pseudo-second order model provided the best fit for experimental data with coefficient of determination R2 > 0.99. Freundlich and Langmuir isotherm models were used to describe metal adsorption. Equilibrium data agreed well with Langmuir isotherm with R2 = 0.993.

  5. Genome Sequence Databases (Overview): Sequencing and Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, Alla L.

    2009-01-01

    From the date its role in heredity was discovered, DNA has been generating interest among scientists from different fields of knowledge: physicists have studied the three dimensional structure of the DNA molecule, biologists tried to decode the secrets of life hidden within these long molecules, and technologists invent and improve methods of DNA analysis. The analysis of the nucleotide sequence of DNA occupies a special place among the methods developed. Thanks to the variety of sequencing technologies available, the process of decoding the sequence of genomic DNA (or whole genome sequencing) has become robust and inexpensive. Meanwhile the assembly of whole genome sequences remains a challenging task. In addition to the need to assemble millions of DNA fragments of different length (from 35 bp (Solexa) to 800 bp (Sanger)), great interest in analysis of microbial communities (metagenomes) of different complexities raises new problems and pushes some new requirements for sequence assembly tools to the forefront. The genome assembly process can be divided into two steps: draft assembly and assembly improvement (finishing). Despite the fact that automatically performed assembly (or draft assembly) is capable of covering up to 98% of the genome, in most cases, it still contains incorrectly assembled reads. The error rate of the consensus sequence produced at this stage is about 1/2000 bp. A finished genome represents the genome assembly of much higher accuracy (with no gaps or incorrectly assembled areas) and quality ({approx}1 error/10,000 bp), validated through a number of computer and laboratory experiments.

  6. Self-assembling nanoparticles at surfaces and interfaces

    NARCIS (Netherlands)

    Kinge, S.S.; Crego Calama, Mercedes; Reinhoudt, David

    2008-01-01

    Nanoparticles are the focus of much attention due to their astonishing properties and numerous possibilities for applications in nanotechnology. For realising versatile functions, assembly of nanoparticles in regular patterns on surfaces and at interfaces is required. Assembling nanoparticles

  7. Open test assembly (OTA) shear demonstration testing work/test plan

    International Nuclear Information System (INIS)

    Hiller, S.W.

    1998-01-01

    This document describes the development testing phase associated with the OTA Shear activity and defines the controls to be in place throughout the testing. The purpose of the OTA Shear Program was to provide equipment that is needed for the processing of 40 foot long, sodium wetted, irradiated core components previously used in the FFTF reactor to monitor fuel and materials tests. There are currently 15 of these OTA test stalks located in the Test Assembly Conditioning Station (TACS) inerted vault. These need to be dispositioned for a shutdown mission to eliminate this highly activated, high dose inventory prior to turnover to the ERC since they must be handled by remote operations. These would also need to be dispositioned for a restart mission to free up the vault they currently reside in. The waste handling and cleaning equipment in the J33M Cell was designed and built for the handling of reactor components up to the standard 12 foot length. This program will provide the equipment to the IEM Cell to remotely section the OTAS into pieces less than 12 feet in length to allow for the necessary handling and cleaning operations required for proper disposition. Due to the complexity of all operations associated with remote handling, the availability of the IEM Cell training facility, and the major difficulty with reworking contaminated equipment, it was determined that preliminary testing of the equipment was desirable, This testing activity would provide the added assurance that the equipment will operate as designed prior to performance of the formal Acceptance Test Procedure (ATP) at the IEM Cell, This testing activity will also allow for some operator familiarity and procedure checkout prior to actual installation into the IEM Cell. This development testing will therefore be performed at the conclusion of equipment fabrication and prior to transfer of the equipment to the 400 Area

  8. FMIT Test assemblies. Progress report

    International Nuclear Information System (INIS)

    Nygren, R.E.; Opperman, E.K.

    1978-08-01

    This progress report is a reference document for a number of inter-related tasks supporting the Fusion Materials Irradiation Test (FMIT) Facility being developed by the Hanford Engineering Development Laboratory. The report describes the basic configuration of test assemblies and supporting rationale based on the neutron flux distribution. Perturbed and unperturbed flux profiles are discussed as well as heating rates and cooling requirements

  9. Rapid stalk elongation in tulip (Tulipa gesneriana L. cv. Apeldoorn) and the combined action of cold-induced invertase and the water-channel protein gammaTIP.

    Science.gov (United States)

    Balk, P A; de Boer, A D

    1999-09-01

    Many bulbous plants need a low-temperature treatment for flowering. Cold, for example, affects the elongation of the stalk, thereby influencing the quality of the cut flower. How the elongation of the stalk is promoted by cold and which physiological and biochemical mechanisms are involved have remained obscure. As invertase has been shown to be involved in the cold-induced elongation of the flower stalks of tulips (Lambrechts et al., 1994, Plant Physiol 104: 515-520), we further characterized this enzyme by cloning the cDNA and analysing its expression in various tissues of the tulip (Tulipa gesneriana L. cv. Apeldoorn) stalk. In addition, the role of sucrose synthase was investigated. Since turgor pressure is an important force driving cell elongation, the role of a water-channel protein (gammaTIP) was studied in relation to these two enzymes. The mRNA level of the invertase found was substantially up-regulated as a result of cold treatment. Analysis of the amino acid sequence of this invertase revealed the presence of a vacuolar targeting signal. Two different forms of sucrose synthase were found, the expression of one of them appeared to be restricted to the vascular tissue while the other form was present in the surrounding tissue. Both sucrose synthases were present in the stalk during the entire period of bulb storage and after planting, but their activities declined during stalk elongation. The expression of the gammaTIP gene was restricted mainly to the vascular tissue and its expression profile was identical to that of invertase. Simultaneous expression of invertase and gammaTIP possibly leads to an increase in osmotic potential and vacuolar water uptake, thus providing a driving force for stretching the stalk cells.

  10. Brittle stalk 2 encodes a putative glycosylphosphatidylinositol-anchored protein that affects mechanical strength of maize tissues by altering the composition and structure of secondary cell walls.

    Science.gov (United States)

    Ching, Ada; Dhugga, Kanwarpal S; Appenzeller, Laura; Meeley, Robert; Bourett, Timothy M; Howard, Richard J; Rafalski, Antoni

    2006-10-01

    A spontaneous maize mutant, brittle stalk-2 (bk2-ref), exhibits dramatically reduced tissue mechanical strength. Reduction in mechanical strength in the stalk tissue was highly correlated with a reduction in the amount of cellulose and an uneven deposition of secondary cell wall material in the subepidermal and perivascular sclerenchyma fibers. Cell wall accounted for two-thirds of the observed reduction in dry matter content per unit length of the mutant stalk in comparison to the wildtype stalk. Although the cell wall composition was significantly altered in the mutant in comparison to the wildtype stalks, no compensation by lignin and cell wall matrix for reduced cellulose amount was observed. We demonstrate that Bk2 encodes a Cobra-like protein that is homologous to the rice Bc1 protein. In the bk2-ref gene, a 1 kb transposon-like element is inserted in the beginning of the second exon, disrupting the open reading frame. The Bk2 gene was expressed in the stalk, husk, root, and leaf tissues, but not in the embryo, endosperm, pollen, silk, or other tissues with comparatively few or no secondary cell wall containing cells. The highest expression was in the isolated vascular bundles. In agreement with its role in secondary wall formation, the expression pattern of the Bk2 gene was very similar to that of the ZmCesA10, ZmCesA11, and ZmCesA12 genes, which are known to be involved in secondary wall formation. We have isolated an independent Mutator-tagged allele of bk2, referred to as bk2-Mu7, the phenotype of which is similar to that of the spontaneous mutant. Our results demonstrate that mutations in the Bk2 gene affect stalk strength in maize by interfering with the deposition of cellulose in the secondary cell wall in fiber cells.

  11. Assembly of the membrane domain of ATP synthase in human mitochondria.

    Science.gov (United States)

    He, Jiuya; Ford, Holly C; Carroll, Joe; Douglas, Corsten; Gonzales, Evvia; Ding, Shujing; Fearnley, Ian M; Walker, John E

    2018-03-20

    The ATP synthase in human mitochondria is a membrane-bound assembly of 29 proteins of 18 kinds. All but two membrane components are encoded in nuclear genes, synthesized on cytoplasmic ribosomes, and imported into the matrix of the organelle, where they are assembled into the complex with ATP6 and ATP8, the products of overlapping genes in mitochondrial DNA. Disruption of individual human genes for the nuclear-encoded subunits in the membrane portion of the enzyme leads to the formation of intermediate vestigial ATPase complexes that provide a description of the pathway of assembly of the membrane domain. The key intermediate complex consists of the F 1 -c 8 complex inhibited by the ATPase inhibitor protein IF 1 and attached to the peripheral stalk, with subunits e, f, and g associated with the membrane domain of the peripheral stalk. This intermediate provides the template for insertion of ATP6 and ATP8, which are synthesized on mitochondrial ribosomes. Their association with the complex is stabilized by addition of the 6.8 proteolipid, and the complex is coupled to ATP synthesis at this point. A structure of the dimeric yeast F o membrane domain is consistent with this model of assembly. The human 6.8 proteolipid (yeast j subunit) locks ATP6 and ATP8 into the membrane assembly, and the monomeric complexes then dimerize via interactions between ATP6 subunits and between 6.8 proteolipids (j subunits). The dimers are linked together back-to-face by DAPIT (diabetes-associated protein in insulin-sensitive tissue; yeast subunit k), forming long oligomers along the edges of the cristae.

  12. Onset of self-assembly

    International Nuclear Information System (INIS)

    Chitanvis, S.M.

    1998-01-01

    We have formulated a theory of self-assembly based on the notion of local gauge invariance at the mesoscale. Local gauge invariance at the mesoscale generates the required long-range entropic forces responsible for self-assembly in binary systems. Our theory was applied to study the onset of mesostructure formation above a critical temperature in estane, a diblock copolymer. We used diagrammatic methods to transcend the Gaussian approximation and obtain a correlation length ξ∼(c-c * ) -γ , where c * is the minimum concentration below which self-assembly is impossible, c is the current concentration, and γ was found numerically to be fairly close to 2/3. The renormalized diffusion constant vanishes as the critical concentration is approached, indicating the occurrence of critical slowing down, while the correlation function remains finite at the transition point. copyright 1998 The American Physical Society

  13. Effect of gamma irradiation on the structure of corn stalks and their subsequent bioconversion into protein-rich mycelial biomass of pleurotus sajor-caju

    Energy Technology Data Exchange (ETDEWEB)

    Awafo, V [Quebec Univ., Montreal, PQ (Canada)

    1994-12-31

    Lignocellulosic biomass like corn stalk is an abundant and renewable resource from which food, feed and chemicals may be derived. Enzymatic hydrolysis of native lignocellulosic material is prohibitively slow due to their compositional heterogeneity and structural complexity. In this work, ground corn stalks (20 mesh) were subjected to gamma irradiation (10-170 Mrads) as pretreatments to make them more susceptible for bioconversion into protein-rich mycelial biomass of Pleurotus sajor-caju NRRL 18757. The irradiation was carried out in air in a {sup 60}Co Underwater Calibrator (UC-15, Nordion International) at a dose rate of 2.5 Mrads/h as measured by Fricke dosimetry. No apparent structural differences were observed under the light microscope. However, the protein synthesis and the proportion of mycelial biomass increased with the increase in both the dose of irradiation and time of fermentation during the bioconversion of 1% corn stalk into mycelial biomass of Pleurotus sajor-caju. Gamma irradiation at the dose of 50 Mrads or lower did not produce any appreciable increase in the amount of protein synthesised. At 170 Mrads, the final product contained 28% protein representing a 2-fold increase from non-irradiated corn stalk and an efficiency of 36% conversion of total utilizable polysaccharides of corn stalks into mycelial biomass. The lag phase during mycelial biomass production was much more prolonged at very high doses indicating possible production of some toxic substances during irradiation. (author). 2 tabs., 6 figs.

  14. Steam explosion distinctively enhances biomass enzymatic saccharification of cotton stalks by largely reducing cellulose polymerization degree in G. barbadense and G. hirsutum.

    Science.gov (United States)

    Huang, Yu; Wei, Xiaoyang; Zhou, Shiguang; Liu, Mingyong; Tu, Yuanyuan; Li, Ao; Chen, Peng; Wang, Yanting; Zhang, Xuewen; Tai, Hongzhong; Peng, Liangcai; Xia, Tao

    2015-04-01

    In this study, steam explosion pretreatment was performed in cotton stalks, leading to 5-6 folds enhancements on biomass enzymatic saccharification distinctive in Gossypium barbadense and Gossypium hirsutum species. Sequential 1% H2SO4 pretreatment could further increase biomass digestibility of the steam-exploded stalks, and also cause the highest sugar-ethanol conversion rates probably by releasing less inhibitor to yeast fermentation. By comparison, extremely high concentration alkali (16% NaOH) pretreatment with raw stalks resulted in the highest hexoses yields, but it had the lowest sugar-ethanol conversion rates. Characterization of wall polymer features indicated that biomass saccharification was enhanced with steam explosion by largely reducing cellulose DP and extracting hemicelluloses. It also showed that cellulose crystallinity and arabinose substitution degree of xylans were the major factors on biomass digestibility in cotton stalks. Hence, this study has provided the insights into cell wall modification and biomass process technology in cotton stalks and beyond. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Effects of genetically modified cotton stalks on antibiotic resistance genes, intI1, and intI2 during pig manure composting.

    Science.gov (United States)

    Duan, Manli; Gu, Jie; Wang, Xiaojuan; Li, Yang; Zhang, Sheqi; Yin, Yanan; Zhang, Ranran

    2018-01-01

    Genetically modified (GM) cotton production generates a large yield of stalks and their disposal is difficult. In order to study the feasibility of using GM cotton stalks for composting and the changes that occur in antibiotic resistance genes (ARGs) during composting, we supplemented pig manure with GM or non-GM cotton stalks during composting and we compared their effects on the absolute abundances (AA) of intI1, intI2, and ARGs under the two treatments. The compost was mature after processing based on the germination index and C/N ratio. After composting, the AAs of ARGs, intI1, and intI2 were reduced by 41.7% and 45.0% in the non-GM and GM treatments, respectively. The ARG profiles were affected significantly by temperature and ammonia nitrogen. In addition, excluding tetC, GM cotton stalks had no significant effects on ARGs, intI1, and intI2 compared with the non-GM treatment (p composting with livestock manure, and the AAs of ARGs can be reduced. Furthermore, the results of this study provide a theoretical basis for the harmless utilization of GM cotton stalks. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. PAVE: Program for assembling and viewing ESTs

    Directory of Open Access Journals (Sweden)

    Bomhoff Matthew

    2009-08-01

    Full Text Available Abstract Background New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. Results The PAVE (Program for Assembling and Viewing ESTs assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. Conclusion The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

  17. PAVE: program for assembling and viewing ESTs.

    Science.gov (United States)

    Soderlund, Carol; Johnson, Eric; Bomhoff, Matthew; Descour, Anne

    2009-08-26

    New sequencing technologies are rapidly emerging. Many laboratories are simultaneously working with the traditional Sanger ESTs and experimenting with ESTs generated by the 454 Life Science sequencers. Though Sanger ESTs have been used to generate contigs for many years, no program takes full advantage of the 5' and 3' mate-pair information, hence, many tentative transcripts are assembled into two separate contigs. The new 454 technology has the benefit of high-throughput expression profiling, but introduces time and space problems for assembling large contigs. The PAVE (Program for Assembling and Viewing ESTs) assembler takes advantage of the 5' and 3' mate-pair information by requiring that the mate-pairs be assembled into the same contig and joined by n's if the two sub-contigs do not overlap. It handles the depth of 454 data sets by "burying" similar ESTs during assembly, which retains the expression level information while circumventing time and space problems. PAVE uses MegaBLAST for the clustering step and CAP3 for assembly, however it assembles incrementally to enforce the mate-pair constraint, bury ESTs, and reduce incorrect joins and splits. The PAVE data management system uses a MySQL database to store multiple libraries of ESTs along with their metadata; the management system allows multiple assemblies with variations on libraries and parameters. Analysis routines provide standard annotation for the contigs including a measure of differentially expressed genes across the libraries. A Java viewer program is provided for display and analysis of the results. Our results clearly show the benefit of using the PAVE assembler to explicitly use mate-pair information and bury ESTs for large contigs. The PAVE assembler provides a software package for assembling Sanger and/or 454 ESTs. The assembly software, data management software, Java viewer and user's guide are freely available.

  18. Fuel assembly guide tube

    International Nuclear Information System (INIS)

    Jabsen, F.S.

    1979-01-01

    This invention is directed toward a nuclear fuel assembly guide tube arrangement which restrains spacer grid movement due to coolant flow and which offers secondary means for supporting a fuel assembly during handling and transfer operations

  19. Effect of urea and urea-gamma treatments on cellulose degradation of Thai rice straw and corn stalk

    International Nuclear Information System (INIS)

    Banchorndhevakul, Siriwattana

    2002-01-01

    Cellulose degradation of 20% urea treated and 20% urea-10 kGy gamma treated Thai rice straw and corn stalk showed that combination effect of urea and gamma radiation gave a higher % decrease in neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), cellulose, hemicellulose, and lignin and cutin in comparison with urea effect only for both room temperature storage and room temperature +258 K storage. The results also indicated that cellulose degradation proceeded with time, even at 258 K. A drastic drop to less than half of the original contents in NDF, ADF, and ADL could not be obtained in this study

  20. Effect of urea and urea-gamma treatments on cellulose degradation of Thai rice straw and corn stalk

    Science.gov (United States)

    Banchorndhevakul, Siriwattana

    2002-08-01

    Cellulose degradation of 20% urea treated and 20% urea-10 kGy gamma treated Thai rice straw and corn stalk showed that combination effect of urea and gamma radiation gave a higher % decrease in neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), cellulose, hemicellulose, and lignin and cutin in comparison with urea effect only for both room temperature storage and room temperature +258 K storage. The results also indicated that cellulose degradation proceeded with time, even at 258 K. A drastic drop to less than half of the original contents in NDF, ADF, and ADL could not be obtained in this study.

  1. Polymer Directed Protein Assemblies

    NARCIS (Netherlands)

    van Rijn, Patrick

    2013-01-01

    Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e. g., virus particles. Viruses are a multi-protein assembly of which the morphology is

  2. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sasaki, Y.; Tashima, J.

    1975-01-01

    A description is given of nuclear reactor fuel assemblies arranged in the form of a lattice wherein there is attached to the interface of one of two adjacent fuel assemblies a plate spring having a concave portion curved toward said interface and to the interface of the other fuel assembly a plate spring having a convex portion curved away from said interface

  3. Structure formation in binary mixtures of lipids and detergents: self-assembly and vesicle division.

    Science.gov (United States)

    Noguchi, Hiroshi

    2013-01-14

    Self-assembly dynamics in binary surfactant mixtures and structure changes of lipid vesicles induced by detergent solution are studied using coarse-grained molecular simulations. Disk-shaped micelles, the bicelles, are stabilized by detergents surrounding the rim of a bilayer disk of lipids. The self-assembled bicelles are considerably smaller than bicelles formed from vesicle rupture, and their size is determined by the concentrations of lipids and detergents and the interactions between the two species. The detergent-adsorption induces spontaneous curvature of the vesicle bilayer and results in vesicle division into two vesicles or vesicle rupture into worm-like micelles. The division occurs mainly via the inverse pathway of the modified stalk model. For large spontaneous curvature of the monolayers of the detergents, a pore is often opened, thereby leading to vesicle division or worm-like micelle formation.

  4. Sensor mount assemblies and sensor assemblies

    Science.gov (United States)

    Miller, David H [Redondo Beach, CA

    2012-04-10

    Sensor mount assemblies and sensor assemblies are provided. In an embodiment, by way of example only, a sensor mount assembly includes a busbar, a main body, a backing surface, and a first finger. The busbar has a first end and a second end. The main body is overmolded onto the busbar. The backing surface extends radially outwardly relative to the main body. The first finger extends axially from the backing surface, and the first finger has a first end, a second end, and a tooth. The first end of the first finger is disposed on the backing surface, and the tooth is formed on the second end of the first finger.

  5. Needle knife-assisted endoscopic polypectomy for a large inflammatory fibroid colon polyp by making its stalk into an omega shape using an endoloop.

    Science.gov (United States)

    Kim, Byung Chang; Cheon, Jae Hee; Lee, Sang Kil; Kim, Tae Il; Kim, Hoguen; Kim, Won Ho

    2008-08-30

    Colonic inflammatory fibroid polyp (IFP) is an uncommon benign polypoid lesion, which is composed of fibroblasts, numerous small vessels and edematous connective tissue with marked eosinophilic inflammatory cell infiltration. This condition is frequently detected in the stomach and small intestine, but uncommon in the colon. Although IFP is a benign lesion, surgical resections are performed in most colonic cases because the polyps are usually too large to resect endoscopically. Only three patients underwent endoscopic polypectomy in our literature reviews. Here, we present a case of IFP in the descending colon successful endoscopically resected using a novel technique of trapping its stalk with an endoloop, forming the stalk into an omega shape, and then dissecting the stalk with a needle knife.

  6. Stalking and compensation for existential damage. Some remarks starting from the sentences of the Court of Cassation (Supreme Court of November 11, 2008 - Le stalking et l’indemnisation du dommage existentiel. Quelques considérations suite aux jugements de la Cour de Cassation en Chambres Unies du 11 novembre 2008 - Stalking e risarcimento del danno esistenziale. Alcune considerazioni alla luce delle sentenze della Corte di Cassazione a Sezioni Unite dell’11 novembre 2008

    Directory of Open Access Journals (Sweden)

    Florio M.

    2009-05-01

    Full Text Available A few days ago, a regulation against stalking was introduced into the Italian system, inserting the art. 612 bis into the Italian penal code. The author considers the new set of rules, aiming to defend the stalking victim, and the prospects of compensation for damage to the person. Above all, puts more emphasis on the analysis of compensation for existential damage, which is now accepted to be repayable as a result of the important sentences of the Court of Cassation in 2008, when definite criteria were established. From now on, such criteria for a systematic analysis of compensation for existential damage will be a reference point for the Italian Courts.

  7. Regulated assembly of a supramolecular centrosome scaffold in vitro

    DEFF Research Database (Denmark)

    Woodruff, J. B.; Wueseke, O.; Viscardi, V.

    2015-01-01

    are not well understood. In Caenorhabditis elegans, PCM assembly requires the coiled-coil protein SPD-5. We found that recombinant SPD-5 could polymerize to form micrometer-sized porous networks in vitro. Network assembly was accelerated by two conserved regulators that control PCM assembly in vivo, Polo...

  8. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  9. Nuclear fuel string assembly

    International Nuclear Information System (INIS)

    Ip, A.K.; Koyanagi, K.; Tarasuk, W.R.

    1976-01-01

    A method of fabricating rodded fuels suitable for use in pressure tube type reactors and in pressure vessel type reactors is described. Fuel rods are secured as an inner and an outer sub-assembly, each rod attached between mounting rings secured to the rod ends. The two sub-assemblies are telescoped together and positioned by spaced thimbles located between them to provide precise positioning while permittng differential axial movement between the sub-assemblies. Such sub-assemblies are particularly suited for mounting as bundle strings. The method provides particular advantages in the assembly of annular-section fuel pins, which includes booster fuel containing enriched fuel material. (LL)

  10. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Marmonier, Pierre; Mesnage, Bernard; Nervi, J.C.

    1975-01-01

    This invention refers to fuel assemblies for a liquid metal cooled fast neutron reactor. Each assembly is composed of a hollow vertical casing, of regular polygonal section, containing a bundle of clad pins filled with a fissile or fertile substance. The casing is open at its upper end and has a cylindrical foot at its lower end for positioning the assembly in a housing provided in the horizontal diagrid, on which the core assembly rests. A set of flat bars located on the external surface of the casing enables it to be correctly orientated in its housing among the other core assemblies [fr

  11. Candidate gene association mapping of Sclerotinia stalk rot resistance in sunflower (Helianthus annuus L.) uncovers the importance of COI1 homologs.

    Science.gov (United States)

    Talukder, Zahirul I; Hulke, Brent S; Qi, Lili; Scheffler, Brian E; Pegadaraju, Venkatramana; McPhee, Kevin; Gulya, Thomas J

    2014-01-01

    Functional markers for Sclerotinia basal stalk rot resistance in sunflower were obtained using gene-level information from the model species Arabidopsis thaliana. Sclerotinia stalk rot, caused by Sclerotinia sclerotiorum, is one of the most destructive diseases of sunflower (Helianthus annuus L.) worldwide. Markers for genes controlling resistance to S. sclerotiorum will enable efficient marker-assisted selection (MAS). We sequenced eight candidate genes homologous to Arabidopsis thaliana defense genes known to be associated with Sclerotinia disease resistance in a sunflower association mapping population evaluated for Sclerotinia stalk rot resistance. The total candidate gene sequence regions covered a concatenated length of 3,791 bp per individual. A total of 187 polymorphic sites were detected for all candidate gene sequences, 149 of which were single nucleotide polymorphisms (SNPs) and 38 were insertions/deletions. Eight SNPs in the coding regions led to changes in amino acid codons. Linkage disequilibrium decay throughout the candidate gene regions declined on average to an r (2) = 0.2 for genetic intervals of 120 bp, but extended up to 350 bp with r (2) = 0.1. A general linear model with modification to account for population structure was found the best fitting model for this population and was used for association mapping. Both HaCOI1-1 and HaCOI1-2 were found to be strongly associated with Sclerotinia stalk rot resistance and explained 7.4 % of phenotypic variation in this population. These SNP markers associated with Sclerotinia stalk rot resistance can potentially be applied to the selection of favorable genotypes, which will significantly improve the efficiency of MAS during the development of stalk rot resistant cultivars.

  12. IMPORTANCE OF KNOWING ANGIOGRAPHIC CHARACTERISTICS OF THE TENSOR FASCIAE LATAE VASCULAR STALK

    Directory of Open Access Journals (Sweden)

    Sladjana Ugrenovic

    2006-07-01

    the most common site for infections in vascular surgery. Good cognition of angiographic characteristics of m. TFL vascular stalk is of great importance for prevention of its necrosis before its usage in surgical purposes.

  13. Two-dimensional hierarchical porous carbon composites derived from corn stalks for electrode materials with high performance

    International Nuclear Information System (INIS)

    Xu, Haitao; Zhang, Huijuan; Ouyang, Ya; Liu, Li; Wang, Yu

    2016-01-01

    Highlights: • Novel 2D porous carbon sheets from cornstalks are obtained for the first time. • The hierarchical porous carbon nansheets are gained by chemical activation. • The porous structure facilitates ion transfer and Li-ion absorption. • The strategy are applied to both cathode and anode electrode materials. • The porous nanocomposites exhibit excellent electrochemical performance. - Abstract: Herein, we propose a novel and green strategy to convert crop stalks waste into hierarchical porous carbon composites for electrode materials of lithium-ion batteries. In the method, the sustainable crop stalks, an abundant agricultural byproduct, is recycled and treated by a simple and clean chemical activation process. Afterwards, the obtained porous template is adopted for large-scale production of high-performance anode and cathode materials for lithium-ion batteries. Due to the large surface area, hierarchical porous structures and subsize of the functional particles, the electrode materials manifest excellent electrochemical performance. In particular, the prepared TiO 2 /C composite presents a reversible specific capacity of 203 mAh g −1 after 200 cycles. Our results demonstrate that the sheetlike composites show remarkable cycling stability, high specific capacity and excellent rate ability, and thus hold promise for commercializing the high-performance electrode materials as the advanced lithium-ion batteries.

  14. Fabrication of the novel hydrogel based on waste corn stalk for removal of methylene blue dye from aqueous solution

    Science.gov (United States)

    Ma, Dongzhuo; Zhu, Baodong; Cao, Bo; Wang, Jian; Zhang, Jianwei

    2017-11-01

    The novel hydrogel based on waste corn stalk was synthetized by aqueous solution polymerization technique with functional monomers in the presence of organic montmorillonite (OMMT) under ultrasonic. In this study, batch adsorption experiments were carried out to research the effect of initial dye concentration, the dosage of hydrogel, stirring speed, contact time and temperature on the adsorption of methylene blue (MB) dye. The adsorption process was best described by the pseudo-second-order kinetic model, which confirmed that it should be a chemical process. Furthermore, we ascertained the rate controlling step by establishing the intraparticle diffusion model and the liquid film diffusion model. The adsorption and synthesis mechanisms were vividly depicted in our work as well. Structural and morphological characterizations by virtue of FTIR, FESEM, and Biomicroscope supported the relationship between the adsorption performance and material's microstructure. This research is a valuable contribution for the environmental protection, which not only converts waste corn stalks into functional materials, but improves the removal of organic dye from sewage water.

  15. A Field Experiment on Enhancement of Crop Yield by Rice Straw and Corn Stalk-Derived Biochar in Northern China

    Directory of Open Access Journals (Sweden)

    Yang Yang

    2015-10-01

    Full Text Available Biochar, a green way to deal with burning and burying biomass, has attracted more attention in recent years. To fill the gap of the effects of different biochar on crop yield in Northern China, the first field experiment was conducted in farmland located in Hebei Province. Biochars derived from two kinds of feedstocks (rice straw and corn stalk were added into an Inceptisols area with different dosages (1 ton/ha, 2 ton/ha or 4 ton/ha in April 2014. The crop yields were collected for corn, peanut, and sweet potato during one crop season from spring to autumn 2014, and the wheat from winter 2014 to summer 2015, respectively. The results showed biochar amendment could enhance yields, and biochar from rice straw showed a more positive effect on the yield of corn, peanut, and winter wheat than corn stalk biochar. The dosage of biochar of 2 ton/ha or 1 ton/ha could enhance the yield by 5%–15% and biochar of 4 ton/ha could increase the yield by about 20%. The properties of N/P/K, CEC, and pH of soils amended with biochar were not changed, while biochar effects could be related to improvement of soil water content.

  16. Catalytic conversion of xylose and corn stalk into furfural over carbon solid acid catalyst in γ-valerolactone.

    Science.gov (United States)

    Zhang, Tingwei; Li, Wenzhi; Xu, Zhiping; Liu, Qiyu; Ma, Qiaozhi; Jameel, Hasan; Chang, Hou-min; Ma, Longlong

    2016-06-01

    A novel carbon solid acid catalyst was synthesized by the sulfonation of carbonaceous material which was prepared by carbonization of sucrose using 4-BDS as a sulfonating agent. TEM, N2 adsorption-desorption, elemental analysis, XPS and FT-IR were used to characterize the catalyst. Then, the catalyst was applied for the conversion of xylose and corn stalk into furfural in GVL. The influence of the reaction time, temperature and dosage of catalyst on xylose dehydration were also investigated. The Brønsted acid catalyst exhibited high activity in the dehydration of xylose, with a high furfural yield of 78.5% at 170°C in 30min. What's more, a 60.6% furfural yield from corn stalk was achieved in 100min at 200°C. The recyclability of the sulfonated carbon catalyst was perfect, and it could be reused for 5times without the loss of furfural yields. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. CX3CL1, a chemokine finely tuned to adhesion: critical roles of the stalk glycosylation and the membrane domain

    Directory of Open Access Journals (Sweden)

    Mariano A. Ostuni

    2014-11-01

    Full Text Available The multi-domain CX3CL1 transmembrane chemokine triggers leukocyte adherence without rolling and migration by presenting its chemokine domain (CD to its receptor CX3CR1. Through the combination of functional adhesion assays with structural analysis using FRAP, we investigated the functional role of the other domains of CX3CL1, i.e., its mucin stalk, transmembrane domain, and cytosolic domain. Our results indicate that the CX3CL1 molecular structure is finely adapted to capture CX3CR1 in circulating cells and that each domain has a specific purpose: the mucin stalk is stiffened by its high glycosylation to present the CD away from the membrane, the transmembrane domain generates the permanent aggregation of an adequate amount of monomers to guarantee adhesion and prevent rolling, and the cytosolic domain ensures adhesive robustness by interacting with the cytoskeleton. We propose a model in which quasi-immobile CX3CL1 bundles are organized to quickly generate adhesive patches with sufficiently high strength to capture CX3CR1+ leukocytes but with sufficiently low strength to allow their patrolling behavior.

  18. Exploring of Agro Waste (Pineapple Leaf, Corn Stalk, and Napier Grass by Chemical Composition and Morphological Study

    Directory of Open Access Journals (Sweden)

    Angzzas Sari Mohd Kassim

    2013-12-01

    Full Text Available Malaysia is a country that is a rich source of agricultural waste material. Three different crops were studied here, including pineapple (Ananas comosus leaf, corn (Zea mays stalk, and Napier grass (Pennisetum purpureum. These crops are characterized as agricultural waste materials in Malaysia and have a high potential to be used as alternative fibers for the paper making industry. The objective of this work was to analyze the chemical composition of pineapple leaf, corn stalk, and Napier grass and to investigate the fiber morphology of these crops. The chemical components analyzed include the following: cellulose (Kurshner-Hoffner method, holocellulose (chlorination method, hemicellulose (chlorination method, ash content (TAPPI method T211-om-93, lignin content (TAPPI method T222-om-98, and soluble sodium hydroxide (TAPPI method T203-om-98. All handsheets morphologies were observed using scanning electron microscopy (SEM. Results indicated each crop has the potential for use as a fiber in paper making. SEM images indicated a condensed composition of the fiber structure. The observed chemical composition and morphology of these three crops indicate their suitability for use as fiber sources for the paper industry.

  19. Vector assembly of colloids on monolayer substrates

    Science.gov (United States)

    Jiang, Lingxiang; Yang, Shenyu; Tsang, Boyce; Tu, Mei; Granick, Steve

    2017-06-01

    The key to spontaneous and directed assembly is to encode the desired assembly information to building blocks in a programmable and efficient way. In computer graphics, raster graphics encodes images on a single-pixel level, conferring fine details at the expense of large file sizes, whereas vector graphics encrypts shape information into vectors that allow small file sizes and operational transformations. Here, we adapt this raster/vector concept to a 2D colloidal system and realize `vector assembly' by manipulating particles on a colloidal monolayer substrate with optical tweezers. In contrast to raster assembly that assigns optical tweezers to each particle, vector assembly requires a minimal number of optical tweezers that allow operations like chain elongation and shortening. This vector approach enables simple uniform particles to form a vast collection of colloidal arenes and colloidenes, the spontaneous dissociation of which is achieved with precision and stage-by-stage complexity by simply removing the optical tweezers.

  20. Orthology Guided Assembly in highly heterozygous crops

    DEFF Research Database (Denmark)

    Ruttink, Tom; Sterck, Lieven; Rohde, Antje

    2013-01-01

    to outbreeding crop species hamper De Bruijn Graph-based de novo assembly algorithms, causing transcript fragmentation and the redundant assembly of allelic contigs. If multiple genotypes are sequenced to study genetic diversity, primary de novo assembly is best performed per genotype to limit the level......Despite current advances in next-generation sequencing data analysis procedures, de novo assembly of a reference sequence required for SNP discovery and expression analysis is still a major challenge in genetically uncharacterized, highly heterozygous species. High levels of polymorphism inherent...... of polymorphism and avoid transcript fragmentation. Here, we propose an Orthology Guided Assembly procedure that first uses sequence similarity (tBLASTn) to proteins of a model species to select allelic and fragmented contigs from all genotypes and then performs CAP3 clustering on a gene-by-gene basis. Thus, we...

  1. Clean industrial room for drift tube assembling

    International Nuclear Information System (INIS)

    Glonti, G.L.; Gongadze, A.L.; Evtukhovich, P.G.

    2001-01-01

    Description of a clean industrial room for assembly of drift tubes for the muon spectrometer of the ATLAS experiment is presented. High quality specifications on the detectors to be produced demanded creation of a workplace with stable temperature and humidity, as well as minimum quantity of dust in the room. Checking of parameters of intra-room air during long period of continuous work has confirmed correctness of the designed characteristics of the climatic system installed in the clean room. The room large volume (∼ 190 m 3 ), the powerful and flexible climatic system, and simplicity of service allow assembling of detectors with length up to 5 m. Subsequent checking of functionality of the assembled detectors has shown high quality of assembling (the amount of rejected tubes does not exceed 2%). It demonstrates conformity to the assembling quality requirements for mass production of drift chambers for the muon spectrometer. (author)

  2. Clean Industrial Room for Drift Tube Assembling

    CERN Document Server

    Glonti, GL; Evtoukhovitch, P G; Kroa, G; Manz, A; Potrap, I N; Rihter, P; Stoletov, G D; Tskhadadze, E G; Chepurnov, V F; Chirkov, A V; Shelkov, G A

    2001-01-01

    Description of a clean industrial room for assembly of drift tubes for the muon spectrometer of the ATLAS experiment is presented. High quality specifications on the detectors to be produced demanded creation of a workplace with stable temperature and humidity, as well as minimum quantity of dust in the room. Checking of parameters of intra-room air during long period of continuous work has been confirmed correctness of the designed characteristics of the climatic system installed in the clean room. The room large volum (\\sim 190 m^3), the powerful and flexible climatic system, and simplicity of service allow assembling of detectors with length up to 5 m. Subsequent checking of functionality of the assembled detectors has shown high quality of assembling (the amount of rejected tubes does not exceed 2 %). It demonstrates conformity to the assembling quality requirements for mass production of drift chambers for the muon spectrometer.

  3. Several tetratricopeptide repeat (TPR) motifs of FANCG are required for assembly of the BRCA2/D1-D2-G-X3 complex, FANCD2 monoubiquitylation and phleomycin resistance

    International Nuclear Information System (INIS)

    Wilson, James B.; Blom, Eric; Cunningham, Ryan; Xiao, Yuxuan; Kupfer, Gary M.; Jones, Nigel J.

    2010-01-01

    The Fanconi anaemia (FA) FANCG protein is an integral component of the FA nuclear core complex that is required for monoubiquitylation of FANCD2. FANCG is also part of another protein complex termed D1-D2-G-X3 that contains FANCD2 and the homologous recombination repair proteins BRCA2 (FANCD1) and XRCC3. Formation of the D1-D2-G-X3 complex is mediated by serine-7 phosphorylation of FANCG and occurs independently of the FA core complex and FANCD2 monoubiquitylation. FANCG contains seven tetratricopeptide repeat (TPR) motifs that mediate protein-protein interactions and here we show that mutation of several of the TPR motifs at a conserved consensus residue ablates the in vivo binding activity of FANCG. Expression of mutated TPR1, TPR2, TPR5 and TPR6 in Chinese hamster fancg mutant NM3 fails to functionally complement its hypersensitivities to mitomycin C (MMC) and phleomycin and fails to restore FANCD2 monoubiquitylation. Using co-immunoprecipitation analysis, we demonstrate that these TPR-mutated FANCG proteins fail to interact with BRCA2, XRCC3, FANCA or FANCF. The interactions of other proteins in the D1-D2-G-X3 complex are also absent, including the interaction of BRCA2 with both the monoubiquitylated (FANCD2-L) and non-ubiquitylated (FANCD2-S) isoforms of FANCD2. Interestingly, a mutation of TPR7 (R563E), that complements the MMC and phleomycin hypersensitivity of human FA-G EUFA316 cells, fails to complement NM3, despite the mutated FANCG protein co-precipitating with FANCA, BRCA2 and XRCC3. Whilst interaction of TPR7-mutated FANCG with FANCF does appear to be reduced in NM3, FANCD2 is monoubiquitylated suggesting that sub-optimal interactions of FANCG in the core complex and the D1-D2-G-X3 complex are responsible for the observed MMC- and phleomycin-hypersensitivity, rather than a defect in FANCD2 monoubiquitylation. Our data demonstrate that FANCG functions as a mediator of protein-protein interactions and is vital for the assembly of multi-protein complexes

  4. Several tetratricopeptide repeat (TPR) motifs of FANCG are required for assembly of the BRCA2/D1-D2-G-X3 complex, FANCD2 monoubiquitylation and phleomycin resistance

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, James B. [Molecular Oncology and Stem Cell Research Group, School of Biological Sciences, University of Liverpool, Biosciences Building, Crown Street, Liverpool L69 7ZB (United Kingdom); Blom, Eric [Department of Clinical Genetics and Human Genetics, VU University Medical Center, Van der Boechorststraat 7, NL-1081 BT Amsterdam (Netherlands); Cunningham, Ryan; Xiao, Yuxuan [Molecular Oncology and Stem Cell Research Group, School of Biological Sciences, University of Liverpool, Biosciences Building, Crown Street, Liverpool L69 7ZB (United Kingdom); Kupfer, Gary M. [Departments of Pediatrics and Pathology, Yale University School of Medicine, Section of Hematology/Oncology, 333 Cedar Street, New Haven, CT 0652 (United States); Jones, Nigel J., E-mail: njjones@liv.ac.uk [Molecular Oncology and Stem Cell Research Group, School of Biological Sciences, University of Liverpool, Biosciences Building, Crown Street, Liverpool L69 7ZB (United Kingdom)

    2010-07-07

    The Fanconi anaemia (FA) FANCG protein is an integral component of the FA nuclear core complex that is required for monoubiquitylation of FANCD2. FANCG is also part of another protein complex termed D1-D2-G-X3 that contains FANCD2 and the homologous recombination repair proteins BRCA2 (FANCD1) and XRCC3. Formation of the D1-D2-G-X3 complex is mediated by serine-7 phosphorylation of FANCG and occurs independently of the FA core complex and FANCD2 monoubiquitylation. FANCG contains seven tetratricopeptide repeat (TPR) motifs that mediate protein-protein interactions and here we show that mutation of several of the TPR motifs at a conserved consensus residue ablates the in vivo binding activity of FANCG. Expression of mutated TPR1, TPR2, TPR5 and TPR6 in Chinese hamster fancg mutant NM3 fails to functionally complement its hypersensitivities to mitomycin C (MMC) and phleomycin and fails to restore FANCD2 monoubiquitylation. Using co-immunoprecipitation analysis, we demonstrate that these TPR-mutated FANCG proteins fail to interact with BRCA2, XRCC3, FANCA or FANCF. The interactions of other proteins in the D1-D2-G-X3 complex are also absent, including the interaction of BRCA2 with both the monoubiquitylated (FANCD2-L) and non-ubiquitylated (FANCD2-S) isoforms of FANCD2. Interestingly, a mutation of TPR7 (R563E), that complements the MMC and phleomycin hypersensitivity of human FA-G EUFA316 cells, fails to complement NM3, despite the mutated FANCG protein co-precipitating with FANCA, BRCA2 and XRCC3. Whilst interaction of TPR7-mutated FANCG with FANCF does appear to be reduced in NM3, FANCD2 is monoubiquitylated suggesting that sub-optimal interactions of FANCG in the core complex and the D1-D2-G-X3 complex are responsible for the observed MMC- and phleomycin-hypersensitivity, rather than a defect in FANCD2 monoubiquitylation. Our data demonstrate that FANCG functions as a mediator of protein-protein interactions and is vital for the assembly of multi-protein complexes

  5. ITER assembly and maintenance

    International Nuclear Information System (INIS)

    Honda, T.; Davis, F.; Lousteau, D.

    1991-01-01

    This document is intended to describe the work conducted by the ITER Assembly and Maintenance (A and M) Design Unit and the supporting home teams during the ITER Conceptual Design Activities, carried out from 1988 through 1990. Its content consists of two main sections, i.e., Chapter III, which describes the identified tasks to be performed by the A and M system and a general description of the required equipment; and Chapter IV, which provides a more detailed description of the equipment proposed to perform the assigned tasks. A two-stage R and D program is now planned, i.e., (1) a prototype equipment functional tests using full scale mock-ups and (2) a full scale integration demonstration test facility with real components (vacuum vessel with ports, blanket modules, divertor modules, armor tiles, etc.). Crucial in-vessel and ex-vessel operations and the associated remote handling equipment, including handling of divertor plates and blanket modules will be demonstrated in the first phase, whereby the database needed to proceed with the engineering phase will be acquired. The second phase will demonstrate the ability of the overall system to execute the required maintenance procedures and evaluate the performance of the prototype equipment

  6. In vitro assembly of catalase.

    Science.gov (United States)

    Baureder, Michael; Barane, Elisabeth; Hederstedt, Lars

    2014-10-10

    Most aerobic organisms contain catalase, which functions to decompose hydrogen peroxide. Typical catalases are structurally complex homo-tetrameric enzymes with one heme prosthetic group buried in each subunit. It is not known how catalase in the cell is assembled from its constituents. The bacterium Enterococcus faecalis cannot synthesize heme but can acquire it from the environment to form a cytoplasmic catalase. We have in E. faecalis monitored production of the enzyme polypeptide (KatA) depending on the availability of heme and used our findings to devise a procedure for the purification of preparative amounts of in vivo-synthesized apocatalase. We show that fully active catalase can be obtained in vitro by incubating isolated apoprotein with hemin. We have characterized features of the assembly process and describe a temperature-trapped hemylated intermediate of the enzyme maturation process. Hemylation of apocatalase does not require auxiliary cell components, but rapid assembly of active enzyme seemingly is assisted in the cell. Our findings provide insight about catalase assembly and offer new experimental possibilities for detailed studies of this process. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

  7. In Vitro Assembly of Catalase*

    Science.gov (United States)

    Baureder, Michael; Barane, Elisabeth; Hederstedt, Lars

    2014-01-01

    Most aerobic organisms contain catalase, which functions to decompose hydrogen peroxide. Typical catalases are structurally complex homo-tetrameric enzymes with one heme prosthetic group buried in each subunit. It is not known how catalase in the cell is assembled from its constituents. The bacterium Enterococcus faecalis cannot synthesize heme but can acquire it from the environment to form a cytoplasmic catalase. We have in E. faecalis monitored production of the enzyme polypeptide (KatA) depending on the availability of heme and used our findings to devise a procedure for the purification of preparative amounts of in vivo-synthesized apocatalase. We show that fully active catalase can be obtained in vitro by incubating isolated apoprotein with hemin. We have characterized features of the assembly process and describe a temperature-trapped hemylated intermediate of the enzyme maturation process. Hemylation of apocatalase does not require auxiliary cell components, but rapid assembly of active enzyme seemingly is assisted in the cell. Our findings provide insight about catalase assembly and offer new experimental possibilities for detailed studies of this process. PMID:25148685

  8. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  9. NIF Target Assembly Metrology Methodology and Results

    Energy Technology Data Exchange (ETDEWEB)

    Alger, E. T. [General Atomics, San Diego, CA (United States); Kroll, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dzenitis, E. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Montesanti, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hughes, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Swisher, M. [IAP, Livermore, CA (United States); Taylor, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Segraves, K. [IAP, Livermore, CA (United States); Lord, D. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Castro, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edwards, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-01-01

    During our inertial confinement fusion (ICF) experiments at the National Ignition Facility (NIF) we require cryogenic targets at the 1-cm scale to be fabricated, assembled, and metrologized to micron-level tolerances. During assembly of these ICF targets, there are physical dimensmetrology is completed using optical coordinate measurement machines that provide repeatable measurements with micron precision, while also allowing in-process data collection for absolute accuracy in assembly. To date, 51 targets have been assembled and metrologized, and 34 targets have been successfully fielded on NIF relying on these metrology data. In the near future, ignition experiments on NIF will require tighter tolerances and more demanding target assembly and metrology capability. Metrology methods, calculations, and uncertainty estimates will be discussed. Target diagnostic port alignment, target position, and capsule location results will be reviewed for the 2009 Energetics Campaign. The information is presented via control charts showing the effect of process improvements that were made during target production. Certain parameters, including capsule position, met the 2009 campaign specifications but will have much tighter requirements in the future. Finally, in order to meet these new requirements assembly process changes and metrology capability upgrades will be necessary.

  10. Target Assembly Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Target Assembly Facility integrates new armor concepts into actual armored vehicles. Featuring the capability ofmachining and cutting radioactive materials, it...

  11. Composite turbine bucket assembly

    Science.gov (United States)

    Liotta, Gary Charles; Garcia-Crespo, Andres

    2014-05-20

    A composite turbine blade assembly includes a ceramic blade including an airfoil portion, a shank portion and an attachment portion; and a transition assembly adapted to attach the ceramic blade to a turbine disk or rotor, the transition assembly including first and second transition components clamped together, trapping said ceramic airfoil therebetween. Interior surfaces of the first and second transition portions are formed to mate with the shank portion and the attachment portion of the ceramic blade, and exterior surfaces of said first and second transition components are formed to include an attachment feature enabling the transition assembly to be attached to the turbine rotor or disk.

  12. Genotyping-by-sequencing uncovers the introgression alien segments associated with Sclerotinia basal stalk rot resistance from wild species—I. Helianthus argophyllus and H. petiolaris

    Science.gov (United States)

    Basal stalk rot (BSR), caused by Sclerotinia Sclerotiorum, is a devastating disease in sunflower worldwide. The progress of breeding for Sclerotinia BSR resistance has been hampered due to the lack of effective sources of resistance for cultivated sunflower. Our objective was to transfer BSR resista...

  13. Analysis of microbial taxonomical groups present in maize stalks suppressive to colonization by toxigenic Fusarium spp.: A strategy for the identification of potential antagonists

    NARCIS (Netherlands)

    Köhl, J.; Lombaers-van der Plas, C.H.; Moretti, A.; Bandyopadhyay, R.; Somma, S.; Kastelein, P.

    2015-01-01

    Pink ear rot of maize caused by Fusarium verticillioides, Fusariumproliferatum and Fusariumgraminearumcan lead to severe yield losses and contamination of grain with a range of mycotoxins. Maize stalks colonized by Fusarium spp. are the main primary inoculum source for Fusarium incited epidemics in

  14. Intimate Partner Violence Perpetration by Court-Ordered Men: Distinctions and Intersections among Physical Violence, Sexual Violence, Psychological Abuse, and Stalking

    Science.gov (United States)

    Basile, Kathleen C.; Hall, Jeffrey E.

    2011-01-01

    This study assessed the construct validity of two different measurement models of male partners' perpetration of physical violence, sexual violence, psychological abuse, and stalking against intimate partners. Data were obtained from a sample of 340 men arrested for physical assault of a female spouse or partner and court ordered into batterer…

  15. In vitro and in situ degradation of alkali treated sorghum wet distillers grains alone or in combination with corn stalks to increase their nutritive value

    Science.gov (United States)

    This experiment was conducted to evaluate the effect of alkali treatment on in vitro and in situ digestibility of fiber sources. An in vitro and in situ experiment were conducted to determine the effects of treating sorghum WDG with solubles (SWDG) and corn stalks (CS) with calcium hydroxide on in ...

  16. The C-terminal helix of ribosomal P stalk recognizes a hydrophobic groove of elongation factor 2 in a novel fashion.

    Science.gov (United States)

    Tanzawa, Takehito; Kato, Koji; Girodat, Dylan; Ose, Toyoyuki; Kumakura, Yuki; Wieden, Hans-Joachim; Uchiumi, Toshio; Tanaka, Isao; Yao, Min

    2018-04-06

    Archaea and eukaryotes have ribosomal P stalks composed of anchor protein P0 and aP1 homodimers (archaea) or P1•P2 heterodimers (eukaryotes). These P stalks recruit translational GTPases to the GTPase-associated center in ribosomes to provide energy during translation. The C-terminus of the P stalk is known to selectively recognize GTPases. Here we investigated the interaction between the P stalk and elongation factor 2 by determining the structures of Pyrococcus horikoshii EF-2 (PhoEF-2) in the Apo-form, GDP-form, GMPPCP-form (GTP-form), and GMPPCP-form bound with 11 C-terminal residues of P1 (P1C11). Helical structured P1C11 binds to a hydrophobic groove between domain G and subdomain G' of PhoEF-2, where is completely different from that of aEF-1α in terms of both position and sequence, implying that such interaction characteristic may be requested by how GTPases perform their functions on the ribosome. Combining PhoEF-2 P1-binding assays with a structural comparison of current PhoEF-2 structures and molecular dynamics model of a P1C11-bound GDP form, the conformational changes of the P1C11-binding groove in each form suggest that in response to the translation process, the groove has three states: closed, open, and release for recruiting and releasing GTPases.

  17. Interactive Assembly Guide using Augmented Reality

    DEFF Research Database (Denmark)

    Andersen, Martin; Andersen, Rasmus Skovgaard; Larsen, Christian Lindequist

    2009-01-01

    This paper presents an Augmented Reality system for aiding a pump assembling process at Grundfos, one of the leading pump producers. Stable pose estimation of the pump is required in order to augment the graphics correctly. This is achieved by matching image edges with synthesized edges from CAD...... norm. A dynamic visualization of the augmented graphics provides the user with guidance. Usability tests show that the accuracy of the system is sufficient for assembling the pump....

  18. Analysis of reconfigurable assembly system framing systems in automotive industry

    Directory of Open Access Journals (Sweden)

    Md Zain Mohamad Zamri

    2017-01-01

    Full Text Available Current trend in automotive industry shows increasing demand for multiple models with lean production. Prior to that, automotive manufacturing systems evolved from mass production to flexible automation. Material handling systems and equipment in a single assembly line with multiple models require high investment but with low throughput thus making production cost relatively high. Current assembly process of side structure and undercarriage with downtime occurrence during assembly process affecting production performance (quality, cost and delivery. Manufacturing facilities should allow more flexibility and increase intelligence evolving toward novel reconfigurable assembly systems (RAS. RAS is envisaged capable of increasing factor flexibility and responsiveness by incorporating assembly jig, robot and framing, which could be next generation of world class automotive assembly systems. This project research proposes a new methodology of framework reconfigurable assembly systems principles in automotive framing systems i.e. enhance assembly process between side structure assembly and undercarriage assembly which a new RAS is capable to reconfigure the assembly processes of multiple model on a single assembly line. Simulation software (Witness will be used to simulate and validate current and proposed assembly process. RAS is expected to be a solution for rapid change in structure and for a responsively adjustable production capacity. Quality, cost and delivery are production key parameters that can be achieved by implementing RAS.

  19. Economic, environmental and social assessment of briquette fuel from agricultural residues in China – A study on flat die briquetting using corn stalk

    International Nuclear Information System (INIS)

    Hu, Jianjun; Lei, Tingzhou; Wang, Zhiwei; Yan, Xiaoyu; Shi, Xinguang; Li, Zaifeng; He, Xiaofeng; Zhang, Quanguo

    2014-01-01

    Biomass can be relatively easily stored and transported compared with other types of renewable energy sources. Crop straw can be converted into densified solid biofuel via briquette fuel technology to expand its possible applications and enhance its utilisation efficiency. However, the potential economic, environmental and social impacts of crop straw briquette fuel need to be assessed before its large-scale use. This paper provides a comprehensive evaluation of these impacts for a fully-operating 2 × 10 4 t/a corn stalk briquette fuel plant in China. The results show that with a life time of 15 years, a purchase price of 150 RMB/t for corn stalk and the current sales price of 400 RMB/t for briquette fuel, the plant has a net present value of 9.6 million RMB or 1.5 million USD, an internal rate of return of 36% and a short investment payback period of 4.4 years. The life cycle greenhouse gas emissions are found to be 323 t CO 2 ,e/year or 1 kg CO 2 ,e/GJ, much lower than that of coal. Additionally, the process reduces pollution by decreasing the amount of corn stalk that is discarded or burnt directly in the field. In terms of social impacts, the use of corn stalk briquetting fuel plant is expected to play an important role in increasing local residents' income, improving rural ecological environments, alleviating energy shortages, guaranteeing energy security, and promoting socialism new rural reconstruction. - Highlights: • A fully-operating 2 × 10 4 t/a corn stalk briquette fuel plant in China is analysed. • The plant has net present value of $1.5 million and payback period of 4.4 years. • Life cycle GHG emissions are 323 t CO 2 ,e/year or 1 kg CO 2 ,e/GJ, much lower than coal. • The plant will also have significant social benefits

  20. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Delafosse, Jacques.

    1977-01-01

    This invention relates to a nuclear fuel assembly for a light or heavy water reactor, or for a fast reactor of the kind with a bundle of cladded pins, maintained parallel to each other in a regular network by an assembly of separate supporting grids, fitted with elastic bearing surfaces on these pins [fr

  1. Assembling Transgender Moments

    Science.gov (United States)

    Greteman, Adam J.

    2017-01-01

    In this article, the author seeks to assemble moments--scholarly, popular, and aesthetic--in order to explore the possibilities that emerge as moments collect in education's encounters with the needs, struggles, and possibilities of transgender lives and practices. Assembling moments, the author argues, illustrates the value of "moments"…

  2. Vertical pump assembly

    International Nuclear Information System (INIS)

    Dohnal, M.; Rosel, J.; Skarka, V.

    1988-01-01

    The mounting is described of the drive assembly of a vertical pump for nuclear power plants in areas with seismic risk. The assembly is attached to the building floor using flexible and damping elements. The design allows producing seismically resistant pumps without major design changes in the existing types of vertical pumps. (E.S.). 1 fig

  3. Chromium sorption and Cr(VI) reduction to Cr(III) by grape stalks and yohimbe bark.

    Science.gov (United States)

    Fiol, Núria; Escudero, Carlos; Villaescusa, Isabel

    2008-07-01

    In this work, two low cost sorbents, grape stalks and yohimbe bark wastes were used to remove Cr(VI) and Cr(III) from aqueous solutions. Batch experiments were designed to obtain Cr(VI) and Cr(III) sorption data. The mechanism of Cr(III) and Cr(VI) removal and Cr(VI) reduction to Cr(III) by the two vegetable wastes, has been investigated. Fourier transform infrared rays (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis on solid phase were performed to determine the main functional groups that might be involved in metal uptake and to confirm the presence of Cr(III) on the sorbent, respectively. Results put into evidence that both sorbents are able to reduce Cr(VI) to its trivalent form.

  4. Improvement of enzymatic hydrolysis and ethanol production from corn stalk by alkali and N-methylmorpholine-N-oxide pretreatments.

    Science.gov (United States)

    Cai, Ling-Yan; Ma, Yu-Long; Ma, Xiao-Xia; Lv, Jun-Min

    2016-07-01

    A combinative technology of alkali and N-methylmorpholine-N-oxide (NMMO) was used to pretreat corn stalk (CS) for improving the efficiencies of subsequent enzymatic hydrolysis and ethanol fermentation. The results showed that this strategy could not only remove hemicellulose and lignin but also decrease the crystallinity of cellulose. About 98.0% of enzymatic hydrolysis yield was obtained from the pretreated CS as compared with 46.9% from the untreated sample. The yield for corresponding ethanol yield was 64.6% while untreated CS was only 18.8%. Besides, xylose yield obtained from the untreated CS was only 11.1%, while this value was 93.8% for alkali with NMMO pretreated sample. These results suggest that a combination of alkali with 50% (wt/wt) NMMO solution may be a promising alternative for pretreatment of lignocellulose, which can increase the productions of subsequent enzymatic hydrolysis and ethanol fermentation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Infestation and morphological identification of the stalked epizoic barnacle Octolasmis on the blue crab Portunus pelagicus from the Red Sea

    Science.gov (United States)

    Afifi Khattab, Rafat

    2017-09-01

    The intensity of infestation of the epizoic stalked barnacle Octolasmis on the blue crab was calculated for a total of 180 individuals collected around Jeddah, the western Red Sea Saudi coast. More than 90% of the crabs were found bearing the Octolasmis at a prevalence rate of 92% and mean intensity of 18.5±18.6 (0-127 epibiont per host). The intensity of infestation increased with host size in the range 90-135 mm. Generally, females were more infested (69%) than the males (31%). Octolasmis angulata occurred mostly on the gills, and the lower side of the gill chambers was more infested (84%) than the upper side (16%) and the left side of gills was also more infested than the right side in both males and females. Further studies are still needed to examine the commensal relationship and its impact on the fishery market of the Red Sea blue crab populations.

  6. Structural features of dilute acid, steam exploded, and alkali pretreated mustard stalk and their impact on enzymatic hydrolysis.

    Science.gov (United States)

    Kapoor, Manali; Raj, Tirath; Vijayaraj, M; Chopra, Anju; Gupta, Ravi P; Tuli, Deepak K; Kumar, Ravindra

    2015-06-25

    To overcome the recalcitrant nature of biomass several pretreatment methodologies have been explored to make it amenable to enzymatic hydrolysis. These methodologies alter cell wall structure primarily by removing/altering hemicelluloses and lignin. In this work, alkali, dilute acid, steam explosion pretreatment are systematically studied for mustard stalk. To assess the structural variability after pretreatment, chemical analysis, surface area, crystallinity index, accessibility of cellulose, FT-IR and thermal analysis are conducted. Although the extent of enzymatic hydrolysis varies upon the methodologies used, nevertheless, cellulose conversion increases from adsorption capacity. However, no such relationship is observed for xylose yield. Mass balance of the process is also studied. Dilute acid pretreatment is the best methodology in terms of maximum sugar yield at lower enzyme loading. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Corn stalks char from fast pyrolysis as precursor material for preparation of activated carbon in fluidized bed reactor.

    Science.gov (United States)

    Wang, Zhiqi; Wu, Jingli; He, Tao; Wu, Jinhu

    2014-09-01

    Corn stalks char from fast pyrolysis was activated by physical and chemical activation process in a fluidized bed reactor. The structure and morphology of the carbons were characterized by N2 adsorption and SEM. Effects of activation time and activation agents on the structure of activation carbon were investigated. The physically activated carbons with CO2 have BET specific surface area up to 880 m(2)/g, and exhibit microporous structure. The chemically activated carbons with H3PO4 have BET specific surface area up to 600 m(2)/g, and exhibit mesoporous structure. The surface morphology shows that physically activated carbons exhibit fibrous like structure in nature with long ridges, resembling parallel lines. Whereas chemically activated carbons have cross-interconnected smooth open pores without the fibrous like structure. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Interdependence of Pes1, Bop1, and WDR12 controls nucleolar localization and assembly of the PeBoW complex required for maturation of the 60S ribosomal subunit.

    Science.gov (United States)

    Rohrmoser, Michaela; Hölzel, Michael; Grimm, Thomas; Malamoussi, Anastassia; Harasim, Thomas; Orban, Mathias; Pfisterer, Iris; Gruber-Eber, Anita; Kremmer, Elisabeth; Eick, Dirk

    2007-05-01

    The PeBoW complex is essential for cell proliferation and maturation of the large ribosomal subunit in mammalian cells. Here we examined the role of PeBoW-specific proteins Pes1, Bop1, and WDR12 in complex assembly and stability, nucleolar transport, and pre-ribosome association. Recombinant expression of the three subunits is sufficient for complex formation. The stability of all three subunits strongly increases upon incorporation into the complex. Only overexpression of Bop1 inhibits cell proliferation and rRNA processing, and its negative effects could be rescued by coexpression of WDR12, but not Pes1. Elevated levels of Bop1 induce Bop1/WDR12 and Bop1/Pes1 subcomplexes. Knockdown of Bop1 abolishes the copurification of Pes1 with WDR12, demonstrating Bop1 as the integral component of the complex. Overexpressed Bop1 substitutes for endogenous Bop1 in PeBoW complex assembly, leading to the instability of endogenous Bop1. Finally, indirect immunofluorescence, cell fractionation, and sucrose gradient centrifugation experiments indicate that transport of Bop1 from the cytoplasm to the nucleolus is Pes1 dependent, while Pes1 can migrate to the nucleolus and bind to preribosomal particles independently of Bop1. We conclude that the assembly and integrity of the PeBoW complex are highly sensitive to changes in Bop1 protein levels.

  9. Self-assembled nanostructures

    CERN Document Server

    Zhang, Jin Z; Liu, Jun; Chen, Shaowei; Liu, Gang-yu

    2003-01-01

    Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. Self-Assembled Nanostructures provides systematic coverage of basic nanomaterials science including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from physical to chemical and biological systems, Self-Assembled Nanostructures is the essential reference or text for scientists involved with nanostructures.

  10. SWAP-Assembler: scalable and efficient genome assembly towards thousands of cores.

    Science.gov (United States)

    Meng, Jintao; Wang, Bingqiang; Wei, Yanjie; Feng, Shengzhong; Balaji, Pavan

    2014-01-01

    There is a widening gap between the throughput of massive parallel sequencing machines and the ability to analyze these sequencing data. Traditional assembly methods requiring long execution time and large amount of memory on a single workstation limit their use on these massive data. This paper presents a highly scalable assembler named as SWAP-Assembler for processing massive sequencing data using thousands of cores, where SWAP is an acronym for Small World Asynchronous Parallel model. In the paper, a mathematical description of multi-step bi-directed graph (MSG) is provided to resolve the computational interdependence on merging edges, and a highly scalable computational framework for SWAP is developed to automatically preform the parallel computation of all operations. Graph cleaning and contig extension are also included for generating contigs with high quality. Experimental results show that SWAP-Assembler scales up to 2048 cores on Yanhuang dataset using only 26 minutes, which is better than several other parallel assemblers, such as ABySS, Ray, and PASHA. Results also show that SWAP-Assembler can generate high quality contigs with good N50 size and low error rate, especially it generated the longest N50 contig sizes for Fish and Yanhuang datasets. In this paper, we presented a highly scalable and efficient genome assembly software, SWAP-Assembler. Compared with several other assemblers, it showed very good performance in terms of scalability and contig quality. This software is available at: https://sourceforge.net/projects/swapassembler.

  11. Effects of thidiazuron and paclobutrazol on regeneration potential of tulip flower stalk explants in vitro and subsequent shoot multiplication

    Directory of Open Access Journals (Sweden)

    Małgorzata Podwyszyńska

    2011-01-01

    Full Text Available The effects of TDZ and paclobutrazol on the primary regeneration on tulip flower stalk explants of six cultivars and subsequent shoot multiplication were examined. Explants, flower stalk slices, were excised from cooled and subsequently forced bulbs. The explants were incubated for two months in darkness on medium containing NAA and cytokinins, 2iP and BAP, as control, or TDZ (0.5-4 mg l-1 and paclobutrazol (0.05-0.4 mg l-1. Then, the regenerating explants were subcultured on medium with TDZ and NAA applied at low concentrations. Different regeneration capabilities were found depending on cultivar and growth regulators. The percentage of explants forming leaf-like structures ranged, on the control medium, from 80% in 'Blue Parrot' and 'Prominence' to below 30% in 'Apeldoorn' and 'Mirjoran'. TDZ, applied at optimum for each cultivar concentration, greatly increased the regeneration potential up to 70-100%. Paclobutrazol, added to the TDZ-containing medium, significantly enhanced the response of explants, resulting in high numbers of leaf-like structures formed per explant (13.7-22.8. The structures developed gradually into characteristic forms: the growing up cotyledonary leaf, the probable root primordium formed at its base, the growing downwards stolon and the shoot meristem developed finely on its tip. It is suggested that such primary regeneration may have a nature of somatic embryogenesis. Then, the adventitious shoots developed and formed clusters, which were divided into 2-3 smaller ones every two months. The growth regulators, used at initial stage, markedly influenced subsequent shoot multiplication. Thus, the most intensive shoot formation was noted with TDZ at concentrations of 0.5-2 mg l-1 and paclobutrazol of 0.05-0.1 mg l-1.

  12. Delayed Occurrence of Diabetes Insipidus After Transsphenoidal Surgery with Radiologic Evaluation of the Pituitary Stalk on Magnetic Resonance Imaging.

    Science.gov (United States)

    Hayashi, Yasuhiko; Aida, Yasuhiro; Sasagawa, Yasuo; Oishi, Masahiro; Kita, Daisuke; Tachibana, Osamu; Ueda, Fumiaki; Nakada, Mitsutoshi

    2018-02-01

    Diabetes insipidus (DI) is a major complication of transsphenoidal surgery (TSS). DI usually occurs within a couple of days after TSS. Delayed occurrence of postoperative DI is rarely observed and its developing mechanisms remain unknown. Six patients were identified as having postoperative delayed DI, which was defined as DI that first occurred 2 or more weeks after TSS. They consisted of 1 male and 5 females, and their mean age was 38.3 years (range, 10-76 years). Five patients were histologically diagnosed with Rathke cleft cyst (RCC), and one had RCC coexisting with prolactin-secreting adenoma. Sequential T1-weighted magnetic resonance imaging was evaluated for hyperintensity (HI) in the pituitary stalk and the posterior lobe, indicating the location of antidiuretic hormone. No patients had any DI before TSS. Delayed DI occurred 2 weeks to 3 months after TSS and persisted for 2 weeks to 5 months. T1-weighted magnetic resonance imaging showed that the HI in the posterior lobe became faint but did not disappear after DI occurrence, and their intensities increased with recovery from DI. In contrast, the HI in the pituitary stalk was found faintly preoperatively and turned clear postoperatively and decreased with recovery from DI. The morphologic patterns were dependent on DI duration. In the delayed occurrence of DI, it was suggested that preoperative antidiuretic hormone transport was mildly congested yet not completely blocked when DI manifested postoperatively. Gradual spreading of inflammation to the infundibulum after RCC removal was considered as 1 possible mechanism of this delayed DI development. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. A transposon-directed epigenetic change in ZmCCT underlies quantitative resistance to Gibberella stalk rot in maize.

    Science.gov (United States)

    Wang, Chao; Yang, Qin; Wang, Weixiang; Li, Yipu; Guo, Yanling; Zhang, Dongfeng; Ma, Xuena; Song, Wei; Zhao, Jiuran; Xu, Mingliang

    2017-09-01

    A major resistance quantitative trait locus, qRfg1, significantly enhances maize resistance to Gibberella stalk rot, a devastating disease caused by Fusarium graminearum. However, the underlying molecular mechanism remains unknown. We adopted a map-based cloning approach to identify the resistance gene at qRfg1 and examined the dynamic epigenetic changes during qRfg1-mediated maize resistance to the disease. A CCT domain-containing gene, ZmCCT, is the causal gene at the qRfg1 locus and a polymorphic CACTA-like transposable element (TE1) c. 2.4 kb upstream of ZmCCT is the genetic determinant of allelic variation. The non-TE1 ZmCCT allele is in a poised state, with predictive bivalent chromatin enriched for both repressive (H3K27me3/H3K9me3) and active (H3K4me3) histone marks. Upon pathogen challenge, this non-TE1 ZmCCT allele was promptly induced by a rapid yet transient reduction in H3K27me3/H3K9me3 and a progressive decrease in H3K4me3, leading to disease resistance. However, TE1 insertion in ZmCCT caused selective depletion of H3K4me3 and enrichment of methylated GC to suppress the pathogen-induced ZmCCT expression, resulting in disease susceptibility. Moreover, ZmCCT-mediated resistance to Gibberella stalk rot is not affected by photoperiod sensitivity. This chromatin-based regulatory mechanism enables ZmCCT to be more precise and timely in defense against F. graminearum infection. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  14. Concentration of cadmium, zinc and manganese in root, stalk and leaf of spinach and tomato in Hamedan

    Directory of Open Access Journals (Sweden)

    A. Ghobadi

    2016-11-01

    Full Text Available Heavy metals are considers as significant environment pollutants. Their entrance into food chain is a serious health hazard to humans. This study was conducted to determine the concentrations of Cadmium, Zinc and Manganese in root, stalk and leaf portions of spinach and tomato. For this reason, during 2014 in Hamedan city, 3 farms with 5 repetitions from each farm were sampled. Samples were subjected to acid-digestion and the concentrations of the elements were assayed by inductively coupled plasma (ICP. According to the results, the average concentrations of heavy metals in root, stalk and leaf of spinach was estimated at: cadmium, 0.14, 0.24, 0.34 mg/kg, zinc, 15.53, 24.82, 35 mg/kg and manganese, 26.59, 24.42, 45.38 mg/kg, respectively. The data for the tomato samples were: cadmium, 16.20, 24.42, 33.81 mg/kg, Zinc, 21.48, 39.74, 52.92 mg/kg and manganese, 26.60, 42.41, 61.90 mg/kg, respectively. The mean concentration of cadmium and manganese in spinach and tomato showed a significant difference with the WHO/FAO standard limit. However, in the case of zinc the difference was insignificant. It was concluded that in this experiment the spinach and tomato samples were polluted with higher concentration of cadmium and manganese than the approved limit of WHO/FAO and therefore was found risky for the consumers.

  15. An iterative homogenization technique that preserves assembly core exchanges

    International Nuclear Information System (INIS)

    Mondot, Ph.; Sanchez, R.

    2003-01-01

    A new interactive homogenization procedure for reactor core calculations is proposed that requires iterative transport assembly and diffusion core calculations. At each iteration the transport solution of every assembly type is used to produce homogenized cross sections for the core calculation. The converged solution gives assembly fine multigroup transport fluxes that preserve macro-group assembly exchanges in the core. This homogenization avoids the periodic lattice-leakage model approximation and gives detailed assembly transport fluxes without need of an approximated flux reconstruction. Preliminary results are given for a one-dimensional core model. (authors)

  16. Assembly and handling apparatus for the EBFA Marx generator

    International Nuclear Information System (INIS)

    Staller, G.E.; Hiett, G.E.; Hamilton, I.D.; Aker, M.F.; Daniels, G.A.

    1979-05-01

    Marx generators, a major slow-pulsed power component in Sandia Laboratories' Electron Beam Fusion Accelerator (EBFA), were assembled at a remote facility modified to utilize an assembly-line technique. Due to the size and weight of the various components, as well as the final Marx generator assembly, special handling apparatus was designed. Time and manpower constraints required that this assembly be done in parallel with the construction of the Electron Beam Fusion Facility (EBFF). The completed Marx generators were temporarily stored and then moved from the assembly building to the EBFF using special transportation racks designed specifically for this purpose

  17. 49 CFR 571.209 - Standard No. 209; Seat belt assemblies.

    Science.gov (United States)

    2010-10-01

    ... seat belt assembly to fit the user, including such hardware that may be integral with a buckle... the proper use of the assembly, stressing particularly the importance of wearing the assembly snugly... of Standard No. 208. (a)(1) A manual seat belt assembly, which is subject to the requirements of S5.1...

  18. H2O2 can Increase Lignin Disintegration and Decrease Cellulose Decomposition in the Process of Solid-State Fermentation (SSF) by Aspergillus oryzae Using Corn Stalk as Raw Materials

    OpenAIRE

    Zhicai Zhang; Jun Jia; Ming Li; Qiaoxia Pang

    2014-01-01

    H2O2 is both bactericidal and the main oxidant responsible for lignin degradation reaction catalyzed by manganese peroxidase (MnP) and lignin peroxidase (LiP). Thus, H2O2 treatment of corn stalk and the implementation of solid-substrate fermentation (SSF) is possible to increase the removal rate of lignin from stalk in the process of SSF and after SSF, while avoiding the need to sterilize the raw materials. To demonstrate this approach, SSF was initially carried out using corn stalk pretreate...

  19. Targeted assembly of short sequence reads.

    Directory of Open Access Journals (Sweden)

    René L Warren

    Full Text Available As next-generation sequence (NGS production continues to increase, analysis is becoming a significant bottleneck. However, in situations where information is required only for specific sequence variants, it is not necessary to assemble or align whole genome data sets in their entirety. Rather, NGS data sets can be mined for the presence of sequence variants of interest by localized assembly, which is a faster, easier, and more accurate approach. We present TASR, a streamlined assembler that interrogates very large NGS data sets for the presence of specific variants by only considering reads within the sequence space of input target sequences provided by the user. The NGS data set is searched for reads with an exact match to all possible short words within the target sequence, and these reads are then assembled stringently to generate a consensus of the target and flanking sequence. Typically, variants of a particular locus are provided as different target sequences, and the presence of the variant in the data set being interrogated is revealed by a successful assembly outcome. However, TASR can also be used to find unknown sequences that flank a given target. We demonstrate that TASR has utility in finding or confirming genomic mutations, polymorphisms, fusions and integration events. Targeted assembly is a powerful method for interrogating large data sets for the presence of sequence variants of interest. TASR is a fast, flexible and easy to use tool for targeted assembly.

  20. A classification scheme for LWR fuel assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Moore, R.S.; Williamson, D.A.; Notz, K.J.

    1988-11-01

    With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs.

  1. A classification scheme for LWR fuel assemblies

    International Nuclear Information System (INIS)

    Moore, R.S.; Williamson, D.A.; Notz, K.J.

    1988-11-01

    With over 100 light water nuclear reactors operating nationwide, representing designs by four primary vendors, and with reload fuel manufactured by these vendors and additional suppliers, a wide variety of fuel assembly types are in existence. At Oak Ridge National Laboratory, both the Systems Integration Program and the Characteristics Data Base project required a classification scheme for these fuels. This scheme can be applied to other areas and is expected to be of value to many Office of Civilian Radioactive Waste Management programs. To develop the classification scheme, extensive information on the fuel assemblies that have been and are being manufactured by the various nuclear fuel vendors was compiled, reviewed, and evaluated. It was determined that it is possible to characterize assemblies in a systematic manner, using a combination of physical factors. A two-stage scheme was developed consisting of 79 assembly types, which are grouped into 22 assembly classes. The assembly classes are determined by the general design of the reactor cores in which the assemblies are, or were, used. The general BWR and PWR classes are divided differently but both are based on reactor core configuration. 2 refs., 15 tabs

  2. EAST machine assembly and its measurement system

    International Nuclear Information System (INIS)

    Wu, S.T.

    2005-01-01

    The EAST (HT-7U) superconducting tokamak consists of a superconducting poloidal field magnet system, a toroidal field magnet system, a vacuum vessel and in-vessel components, thermal shields and a cryostat vessel. The main parts of the machine have been delivered to ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) successionally from 2003. For its complicated constitution and precise requirement, a reasonable assembly procedure and measurement technique should be defined carefully. Before the assembly procedure, a reference frame has been set up with reference fiducial targets on the wall of the test hall by an industrial measurement system. After the torus of TF coils is formed, a new reference frame will be set up from the position of the TF torus. The vacuum vessel with all inner parts will be installed with reference of the new reference frame. The big size and mass of components, special configuration of the superconducting machine with tight installation tolerances of the HT-7U (EAST) machine result in complicated assembly procedure. The procedure had begun with the installation of the support frame and the base of cryostat vessel last year. In this paper, the requirements of the assembly precise for some key components of the machine are described. The reference frame for the assembly and maintenance is explained. The assembly procedure is introduced

  3. TPX assembly plan

    International Nuclear Information System (INIS)

    Knutson, D.

    1993-01-01

    The TPX machine will be assembled in the TFTR Test Cell at the Plasma Physics Laboratory, utilizing the existing TFTR machine foundation. Preparation of the area for assembly will begin after completion of the decontamination and decommissioning phase on TFTR and certification that the radiation levels remaining, if any, are consistent with the types of operations planned. Assembly operations begin with the arrival of the first components, and conclude, approximately 24 months later, with the successful completion of the integrated systems tests and the achievement of a first plasma

  4. Nuclear reactor control assembly

    International Nuclear Information System (INIS)

    Negron, S.B.

    1991-01-01

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

  5. Power module assembly with reduced inductance

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Terence G.; Stancu, Constantin C.; Jaksic, Marko; Mann, Brooks S.

    2018-03-13

    A power module assembly has a plurality of electrically conducting layers, including a first layer and a third layer. One or more electrically insulating layers are operatively connected to each of the plurality of electrically conducting layers. The electrically insulating layers include a second layer positioned between and configured to electrically isolate the first and the third layers. The first layer is configured to carry a first current flowing in a first direction. The third layer is configured to carry a second current flowing in a second direction opposite to the first direction, thereby reducing an inductance of the assembly. The electrically insulating layers may include a fourth layer positioned between and configured to electrically isolate the third layer and a fifth layer. The assembly results in a combined substrate and heat sink structure. The assembly eliminates the requirements for connections between separate substrate and heat sink structures.

  6. The inhibition of assembly of HIV-1 virus-like particles by 3-O-(3',3'-dimethylsuccinyl betulinic acid (DSB is counteracted by Vif and requires its Zinc-binding domain

    Directory of Open Access Journals (Sweden)

    Bouaziz Serge

    2008-12-01

    Full Text Available Abstract Background DSB, the 3-O-(3',3'dimethylsuccinyl derivative of betulinic acid, blocks the last step of protease-mediated processing of HIV-1 Gag precursor (Pr55Gag, which leads to immature, noninfectious virions. When administered to Pr55Gag-expressing insect cells (Sf9, DSB inhibits the assembly and budding of membrane-enveloped virus-like particles (VLP. In order to explore the possibility that viral factors could modulate the susceptibility to DSB of the VLP assembly process, several viral proteins were coexpressed individually with Pr55Gag in DSB-treated cells, and VLP yields assayed in the extracellular medium. Results Wild-type Vif (Vifwt restored the VLP production in DSB-treated cells to levels observed in control, untreated cells. DSB-counteracting effect was also observed with Vif mutants defective in encapsidation into VLP, suggesting that packaging and anti-DSB effect were separate functions in Vif. The anti-DSB effect was abolished for VifC133S and VifS116V, two mutants which lacked the zinc binding domain (ZBD formed by the four H108C114C133H139 coordinates with a Zn atom. Electron microscopic analysis of cells coexpressing Pr55Gag and Vifwt showed that a large proportion of VLP budded into cytoplasmic vesicles and were released from Sf9 cells by exocytosis. However, in the presence of mutant VifC133S or VifS116V, most of the VLP assembled and budded at the plasma membrane, as in control cells expressing Pr55Gag alone. Conclusion The function of HIV-1 Vif protein which negated the DSB inhibition of VLP assembly was independent of its packaging capability, but depended on the integrity of ZBD. In the presence of Vifwt, but not with ZBD mutants VifC133S and VifS116V, VLP were redirected to a vesicular compartment and egressed via the exocytic pathway.

  7. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.

    1980-01-01

    A bimetallic spacer means is cooperatively associated with a nuclear fuel assembly and operative to resist the occurrence of in-reactor bowing of the nuclear fuel assembly. The bimetallic spacer means in one embodiment of the invention includes a space grid formed, at least principally, of zircaloy to the external surface of which are attached a plurality of stainless steel strips. In another embodiment the strips are attached to fuel pins. In each of the embodiments, the stainless steel strips during power production expand outwardly to a greater extent than do the members to which the stainless steel strips are attached, thereby forming stiff springs which abut against like bimetallic spacer means with which the other nuclear fuel assemblies are provided in a given nuclear reactor core to thus prevent the occurrence of in-reactor bowing of the nuclear fuel assemblies. (author)

  8. Fuel assembly spacer

    International Nuclear Information System (INIS)

    Shirakawa, Ken-etsu.

    1988-01-01

    Purpose: To reduce the pressure loss of coolants by fuel assembly spacers. Constitution: Spacers for supporting a fuel assembly are attached by means of a plurality of wires to an outer frame. The outer frame is made of shape memory alloy such that the wires are caused to slacken at normal temperature and the slacking of the wires is eliminated in excess of the transition temperature. Since the wires slacken at the normal temperature, fuel rods can be inserted easily. After the insertion of the fuel rods, when the entire portion or the outer frame is heated by water or gas at a predetermined temperature, the outer frame resumes its previously memorized shape to tighten the wires and, accordingly, the fuel rods can be supported firmly. In this way, since the fuel rods are inserted in the slacken state of the wires and, after the assembling, the outer frame resumes its memorized shape, the assembling work can be conducted efficiently. (Kamimura, M.)

  9. Nuclear reactor spacer assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1979-01-01

    A fuel assembly for a nuclear reactor is disclosed wherein the fuel element receiving and supporting grid is comprised of a first metal, the guide tubes which pass through the grid assembly are comprised of a second metal and the grid is supported on the guide tubes by means of expanded sleeves located intermediate the grid and guide tubes. The fuel assembly is fabricated by inserting the sleeves, of initial outer diameter commensurate with the guide tube outer diameters, through the holes in the grid assembly provided for the guide tubes and thereafter expanding the sleeves radially outwardly along their entire length such that the guide tubes can subsequently be passed through the sleeves. The step of radial expansion, as a result of windows provided in the sleeves having dimensions commensurate with the geometry of the grid, mechanically captures the grid and simultaneously preloads the sleeve against the grid whereby relative motion between the grid and guide tube will be precluded

  10. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Vikhorev, Yu.V.; Biryukov, G.I.; Kirilyuk, N.A.; Lobanov, V.N.

    1977-01-01

    A fuel assembly is proposed for nuclear reactors allowing remote replacement of control rod bundles or their shifting from one assembly to another, i.e., their multipurpose use. This leads to a significant increase in fuel assembly usability. In the fuel assembly the control rod bundle is placed in guide tube channels to which baffles are attached for fuel element spacing. The remote handling of control rods is provided by a hollow cylinder with openings in its lower bottom through which the control rods pass. All control rods in a bundle are mounted to a cross beam which in turn is mounted in the cylinder and is designed for grasping the whole rod bundle by a remotely controlled telescopic mechanism in bundle replacement or shifting. (Z.M.)

  11. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Betten, P.R.

    1976-01-01

    Under the invention the fuel assembly is particularly suitable for liquid metal cooled fast neutron breeder reactors. Hence, according to the invention a fuel assembly cladding includes inward corrugations with respect to the remainder of the cladding according to a recurring pattern determined by the pitch of the metal wire helically wound round the fuel rods of the assembly. The parts of the cladding pressed inwards correspond to the areas in which the wire encircling the peripheral fuel rods is generally located apart from the cladding, thereby reducing the play between the cladding and the peripheral fuel rods situated in these areas. The reduction in the play in turn improves the coolant flow in the internal secondary channels of the fuel assembly to the detriment of the flow in the peripheral secondary channels and thereby establishes a better coolant fluid temperature profile [fr

  12. Nuclear reactor fuel assembly

    International Nuclear Information System (INIS)

    Sakurai, Shungo; Ogiya, Shunsuke.

    1990-01-01

    In a fuel assembly, if the entire fuels comprise mixed oxide fuels, reactivity change in cold temperature-power operation is increased to worsen the reactor shutdown margin. The reactor shutdown margin has been improved by increasing the burnable poison concentration thereby reducing the reactivity of the fuel assembly. However, since unburnt poisons are present at the completion of the reactor operation, the reactivity can not be utilized effectively to bring about economical disadvantage. In view of the above, the reactivity change between lower temperature-power operations is reduced by providing a non-boiling range with more than 9.1% of cross sectional area at the inside of a channel at the central portion of the fuel assembly. As a result, the amount of the unburnt burnable poisons is decreased, the economy of fuel assembly is improved and the reactor shutdown margin can be increase. (N.H.)

  13. Mobius Assembly: A versatile Golden-Gate framework towards universal DNA assembly.

    Directory of Open Access Journals (Sweden)

    Andreas I Andreou

    Full Text Available Synthetic biology builds upon the foundation of engineering principles, prompting innovation and improvement in biotechnology via a design-build-test-learn cycle. A community-wide standard in DNA assembly would enable bio-molecular engineering at the levels of predictivity and universality in design and construction that are comparable to other engineering fields. Golden Gate Assembly technology, with its robust capability to unidirectionally assemble numerous DNA fragments in a one-tube reaction, has the potential to deliver a universal standard framework for DNA assembly. While current Golden Gate Assembly frameworks (e.g. MoClo and Golden Braid render either high cloning capacity or vector toolkit simplicity, the technology can be made more versatile-simple, streamlined, and cost/labor-efficient, without compromising capacity. Here we report the development of a new Golden Gate Assembly framework named Mobius Assembly, which combines vector toolkit simplicity with high cloning capacity. It is based on a two-level, hierarchical approach and utilizes a low-frequency cutter to reduce domestication requirements. Mobius Assembly embraces the standard overhang designs designated by MoClo, Golden Braid, and Phytobricks and is largely compatible with already available Golden Gate part libraries. In addition, dropout cassettes encoding chromogenic proteins were implemented for cost-free visible cloning screening that color-code different cloning levels. As proofs of concept, we have successfully assembled up to 16 transcriptional units of various pigmentation genes in both operon and multigene arrangements. Taken together, Mobius Assembly delivers enhanced versatility and efficiency in DNA assembly, facilitating improved standardization and automation.

  14. Fuel assembly reconstitution

    International Nuclear Information System (INIS)

    Morgado, Mario M.; Oliveira, Monica G.N.; Ferreira Junior, Decio B.M.; Santos, Barbara O. dos; Santos, Jorge E. dos

    2009-01-01

    Fuel failures have been happened in Nuclear Power Plants worldwide, without lost of integrity and safety, mainly for the public, environment and power plants workers. The most common causes of these events are corrosion (CRUD), fretting and pellet cladding interaction. These failures are identified by increasing the activity of fission products, verified by chemical analyses of reactor coolant. Through these analyses, during the fourth operation cycle of Angra 2 Nuclear Power Plant, was possible to observe fuel failure indication. This indication was confirmed in the end of the cycle during the unloading of reactor core through leakage tests of fuel assembly, using the equipment called 'In Mast Sipping' and 'Box Sipping'. After confirmed, the fuel assembly reconstitution was scheduled, and happened in April, 2007, where was identified the cause and the fuel rod failure, which was substitute by dummy rods (zircaloy). The cause was fretting by 'debris'. The actions to avoid and prevent fuel assemblies failures are important. The goals of this work are to describe the methodology of fuel assembly reconstitution using the FARE (Fuel Assembly Reconstitution Equipment) system, to describe the results of this task in economic and security factors of the company and show how the fuel assembly failures are identified during operation and during the outage. (author)

  15. Polymer Directed Protein Assemblies

    Directory of Open Access Journals (Sweden)

    Patrick van Rijn

    2013-05-01

    Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

  16. Technical operations procedure for assembly and emplacement of the soil temperature test--test assembly

    International Nuclear Information System (INIS)

    Weber, A.P.

    1978-01-01

    A description is given of the plan for assembly, instrumentation, emplacement, and operational checkout of the soil temperature test assembly and dry well liner. The activities described cover all operations necessary to accomplish the receiving inspection, instrumentation and pre-construction handling of the dry well liner, plus all operations performed with the test article. Actual details of construction work are not covered by this procedure. Each part and/or section of this procedure is a separate function to be accomplished as required by the nature of the operation. The organization of the procedure is not intended to imply a special operational sequence or schedular requirement. Specific procedure operational sections include: receiving inspection; liner assembly operations; construction operations (by others); prepare shield plug; test article assembly and installation; and operational checkout

  17. Human Assisted Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    CALTON,TERRI L.; PETERS,RALPH R.

    2000-01-01

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be a perfectly valid operations, but in reality the operations cannot physically be carried out by a human. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications; however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem HFFMs must be integrated with automated assembly planning to allow engineers to verify that assembly operations are possible and to see ways to make the designs even better. Factories will very likely put humans and robots together in cooperative environments to meet the demands for customized products, for purposes including robotic and automated assembly. For robots to work harmoniously within an integrated environment with humans the robots must have cooperative operational skills. For example, in a human only environment, humans may tolerate collisions with one another if they did not cause much pain. This level of tolerance may or may not apply to robot-human environments. Humans expect that robots will be able to operate and navigate in their environments without collisions or interference. The ability to accomplish this is linked to the sensing capabilities available. Current work in the field of cooperative

  18. Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation: Appendix 2E, Physical descriptions of LWR nonfuel assembly hardware, Appendix 2F, User's guide to the LWR nonfuel assembly data base

    International Nuclear Information System (INIS)

    1987-12-01

    This appendix includes a two to three page Physical Description report for each Non-fuel Assembly (NFA) Hardware item identified from the current data. Information was obtained via subcontracts with these NFA hardware vendors: Babcock and Wildox, Combustion Engineering and Westinghouse. Data for some NFA hardware are not available. For such hardware, the information shown in this report was obtained from the open literature. Efforts to obtain additional information are continuing. NFA hardware can be grouped into six categories: BWR Channels, Control Elements, Guide Tube Plugs/Orifice Rods, Instrumentation, Neutron Poisons, and Neutron Sources. This appendix lists Physical Description reports alphabetically by vendor within each category. Individual Physical Description reports can be generated interactively through the menu-driven LWR Non-Fuel Assembly Hardware Data Base system. These reports can be viewed on the screen, directed to a printer, or saved in a text file for later use. Special reports and compilations of specific data items can be produced on request

  19. Could a deletion in neuraminidase stalk strengthen human tropism of the novel avian influenza virus H7N9 in China, 2013?

    Science.gov (United States)

    Chen, Liang; Zhu, Feng; Xiong, Chenglong; Zhang, Zhijie; Jiang, Lufang; Chen, Yue; Zhao, Genming; Jiang, Qingwu

    2015-01-20

    Objective. A novel avian influenza A virus (AIV) H7N9 subtype which emerged in China in 2013 caused worldwide concern. Deletion of amino-acids 69 to 73 in the neuraminidase stalk was its most notable characteristic. This study is aimed to discuss the tropism and virulence effects of this deletion. Neuraminidase gene sequences of N9 subtype were collected from NCBI and GISAID. MEGA6.0, Stata12.0, and UCSF Chimera were employed for sequence aligning, significance testing, and protein tertiary structure homology modeling. A total of 736 sequences were obtained; there were 81 human isolates of the novel AIV H7N9, of which 79 had the deletion. Among all the 654 avian origin sequences, only 43 had the deletion (p deletion obviously changed the spatial direction of neuraminidase. The deletion in neuraminidase stalk could have strengthened human tropism of the novel AIV H7N9, as well as its virulence.

  20. The expression, purification, crystallization and preliminary X-ray analysis of a subcomplex of the peripheral stalk of ATP synthase from bovine mitochondria

    International Nuclear Information System (INIS)

    Silvester, Jocelyn A.; Kane Dickson, Veronica; Runswick, Michael J.; Leslie, Andrew G. W.; Walker, John E.

    2006-01-01

    A recombinant subcomplex of the peripheral stalk or stator domain of the ATP synthase from bovine mitochondria has been crystallized and a native data set has been collected to 2.8 Å resolution. A subcomplex of the peripheral stalk or stator domain of the ATP synthase from bovine mitochondria has been expressed to high levels in a soluble form in Escherichia coli. The subcomplex consists of residues 79–184 of subunit b, residues 1–124 of subunit d and the entire F 6 subunit (76 residues). It has been purified and crystallized by vapour diffusion. The morphology and diffraction properties of the crystals of the subcomplex were improved by the presence of thioxane or 4-methylpyridine in the crystallization liquor. With a synchrotron-radiation source, these crystals diffracted to 2.8 Å resolution. They belong to the monoclinic space group P2 1

  1. Improved Assembly for Gas Shielding During Welding or Brazing

    Science.gov (United States)

    Gradl, Paul; Baker, Kevin; Weeks, Jack

    2009-01-01

    An improved assembly for inert-gas shielding of a metallic joint is designed to be useable during any of a variety of both laser-based and traditional welding and brazing processes. The basic purpose of this assembly or of a typical prior related assembly is to channel the flow of a chemically inert gas to a joint to prevent environmental contamination of the joint during the welding or brazing process and, if required, to accelerate cooling upon completion of the process.

  2. Flexible Assembly Solar Technology (FAST) Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Toister, Elad [BrightSource Energy Inc., Jerusalem (Israel)

    2014-11-06

    The Flexible Assembly Solar Technology (FAST) project was initiated by BrightSource in an attempt to provide potential solar field EPC contractors with an effective set of tools to perform specific construction tasks. These tasks are mostly associated with heliostat assembly and installation, and require customized non-standard tools. The FAST concept focuses on low equipment cost, reduced setup time and increased assembly throughput as compared to the Ivanpah solar field construction tools.

  3. H2O2 can Increase Lignin Disintegration and Decrease Cellulose Decomposition in the Process of Solid-State Fermentation (SSF by Aspergillus oryzae Using Corn Stalk as Raw Materials

    Directory of Open Access Journals (Sweden)

    Zhicai Zhang

    2014-04-01

    Full Text Available H2O2 is both bactericidal and the main oxidant responsible for lignin degradation reaction catalyzed by manganese peroxidase (MnP and lignin peroxidase (LiP. Thus, H2O2 treatment of corn stalk and the implementation of solid-substrate fermentation (SSF is possible to increase the removal rate of lignin from stalk in the process of SSF and after SSF, while avoiding the need to sterilize the raw materials. To demonstrate this approach, SSF was initially carried out using corn stalk pretreated with different concentrations of H2O2 as a substrate. A. oryzae was found to grow well in the 3% H2O2-pretreated corn stalk. H2O2-pretreated corn stalk showed increased MnP and LiP synthesis and disintegration of lignin, but inhibited cellulase synthesis and cellulose degradation. Production of the SSF (200 g on the 10th day was hydrolyzed in the presence of additional 600 mL different concentration of H2O2 aqueous solution. The total removal of lignin (73.15% of hydrolysis for 10 h at 3% H2O2 solution was highest and far higher than that at the 12th day, as achieved by conventional SSF. Applying this strategy in practice may shorten the time of lignin degradation, increase the removal of lignin, and decrease the loss of cellulose. Thus, this study has provided a foundation for further study saccharification of corn stalk.

  4. Dynamic behaviour of diagnostic assemblies

    International Nuclear Information System (INIS)

    Pecinka, L.

    1980-01-01

    The methodology is shown of calculating the frequency spectrum of a diagnostic assembly. The oscillations of the assembly as a whole, of a fuel rod bundle, the assembly jacket and of the individual rods in the bundle were considered. The manufacture is suggested of a model assembly which would be used for testing forced vibrations using an experimental water loop. (M.S.)

  5. Clinical presentation and outcome of children with central diabetes insipidus associated with a self-limited or transient pituitary stalk thickening, diagnosed as infundibuloneurohypophysitis.

    Science.gov (United States)

    Schaefers, J; Cools, M; De Waele, K; Gies, I; Beauloye, V; Lysy, P; Francois, I; Beckers, D; De Schepper, J

    2017-08-01

    Despite lymphocytic or autoimmune infundibuloneurohypophysitis (INH) is an increasingly recognized aetiology in children with central diabetes insipidus (CDI); clinical data on epidemiology (clinical evolution, predisposing factors, complications), diagnosis and management of this entity are limited and mostly based on published case reports. The aim of this study was to gain a broader insight in the natural history of this disease by analysing the clinical presentation, radiological pituitary stalk changes, associated autoimmunity and hormonal deficiencies in children with CDI and a self-limiting or transient stalk thickening (ST), diagnosed as autoimmune infundibuloneurohypophysitis, during the last 15 years in four Belgian university hospitals. The medical files of nine CDI patients with a ST at initial presentation and no signs of Langerhans cell histiocytosis or germinoma at presentation and/or during follow-up of more than 1.5 years were reviewed. Age at presentation ranged from 3 to 14 years. Two patients had a positive family history of autoimmunity. Three children presented with associated growth failure, two with nausea and one with long-standing headache. Median maximal diameter of the stalk was 4.6 mm (2.7-10 mm). Four patients had extra-pituitary brain anomalies, such as cysts. One patient had central hypothyroidism, and another had a partial growth hormone deficiency at diagnosis. Within a mean follow-up of 5.4 (1.5-15) years, stalk thickening remained unchanged in two patients, regressed in one and normalized in six children. CDI remained in all, while additional pituitary hormone deficiencies developed in only one patient. In this series of children INH with CDI as initial presentation, CDI was permanent and infrequently associated with anterior pituitary hormone deficiencies, despite a frequent association with nonstalk cerebral lesions. © 2017 The Authors. Clinical Endocrinology Published by John Wiley & Sons Ltd.

  6. Pyrolysis of rice husk and corn stalk in auger reactor:Part 1. Characterization of char and gas at various temperatures

    OpenAIRE

    Yu, Yang; Yang, Yang; Cheng, Zhicai; Blanco, Paula H.; Liu, Ronghou; Bridgwater, A.V.; Cai, Junmeng

    2016-01-01

    In this study, rice husk and corn stalk have been pyrolyzed in an auger pyrolysis reactor at pyrolysis temperatures of 350, 400, 450, 500, 550, and 600 °C in order to investigate the effect of the pyrolysis temperature on the pyrolysis performance of the reactor and physicochemical properties of pyrolysis products (this paper focuses on char and gas). The results have shown that the pyrolysis temperature significantly affects the mass yields and properties of the pyrolysis products. The mass ...

  7. Metrology Techniques for the Assembly of NCSX

    International Nuclear Information System (INIS)

    Priniski, C.; Dodson, T.; Duco, M.; Raftopoulos, S.; Ellis, R.; Brooks, A.

    2009-01-01

    In support of the National Compact Stellerator Experiment (NCSX), stellerator assembly activities continued this past year at the Princeton Plasma Physics Laboratory (PPPL) in partnership with the Oak Ridge National Laboratory (ORNL). The construction program saw the completion of the first two Half Field-Period Assemblies (HPA), each consisting of three modular coils. The full machine includes six such sub-assemblies. A single HPA consists of three of the NCSX modular coils wound and assembled at PPPL. These geometrically-complex three dimensional coils were wound using computer-aided metrology and CAD models to tolerances within +/- 0.5mm. The assembly of these coils required similar accuracy on a larger scale with the added complexity of more individual parts and fewer degrees of freedom for correction. Several new potential positioning issues developed for which measurement and control techniques were developed. To accomplish this, CAD coordinate-based computer metrology equipment and software similar to the solutions employed for winding the modular coils was used. Given the size of the assemblies, the primary tools were both interferometer aided and Absolute Distance Measurement (ADM)-only based laser trackers. In addition, portable Coordinate Measurement Machine (CMM) arms and some novel indirect measurement techniques were employed. This paper will detail both the use of CAD coordinate-based metrology technology and the techniques developed and employed for dimensional control of NSCX subassemblies. The results achieved and possible improvements to techniques will be discussed.

  8. Terminating DNA Tile Assembly with Nanostructured Caps.

    Science.gov (United States)

    Agrawal, Deepak K; Jiang, Ruoyu; Reinhart, Seth; Mohammed, Abdul M; Jorgenson, Tyler D; Schulman, Rebecca

    2017-10-24

    Precise control over the nucleation, growth, and termination of self-assembly processes is a fundamental tool for controlling product yield and assembly dynamics. Mechanisms for altering these processes programmatically could allow the use of simple components to self-assemble complex final products or to design processes allowing for dynamic assembly or reconfiguration. Here we use DNA tile self-assembly to develop general design principles for building complexes that can bind to a growing biomolecular assembly and terminate its growth by systematically characterizing how different DNA origami nanostructures interact with the growing ends of DNA tile nanotubes. We find that nanostructures that present binding interfaces for all of the binding sites on a growing facet can bind selectively to growing ends and stop growth when these interfaces are presented on either a rigid or floppy scaffold. In contrast, nucleation of nanotubes requires the presentation of binding sites in an arrangement that matches the shape of the structure's facet. As a result, it is possible to build nanostructures that can terminate the growth of existing nanotubes but cannot nucleate a new structure. The resulting design principles for constructing structures that direct nucleation and termination of the growth of one-dimensional nanostructures can also serve as a starting point for programmatically directing two- and three-dimensional crystallization processes using nanostructure design.

  9. Quantifying quality in DNA self-assembly

    Science.gov (United States)

    Wagenbauer, Klaus F.; Wachauf, Christian H.; Dietz, Hendrik

    2014-01-01

    Molecular self-assembly with DNA is an attractive route for building nanoscale devices. The development of sophisticated and precise objects with this technique requires detailed experimental feedback on the structure and composition of assembled objects. Here we report a sensitive assay for the quality of assembly. The method relies on measuring the content of unpaired DNA bases in self-assembled DNA objects using a fluorescent de-Bruijn probe for three-base ‘codons’, which enables a comparison with the designed content of unpaired DNA. We use the assay to measure the quality of assembly of several multilayer DNA origami objects and illustrate the use of the assay for the rational refinement of assembly protocols. Our data suggests that large and complex objects like multilayer DNA origami can be made with high strand integration quality up to 99%. Beyond DNA nanotechnology, we speculate that the ability to discriminate unpaired from paired nucleic acids in the same macromolecule may also be useful for analysing cellular nucleic acids. PMID:24751596

  10. Reusable fuel test assembly for the FFTF

    International Nuclear Information System (INIS)

    Pitner, A.L.; Dittmer, J.O.

    1992-01-01

    A fuel test assembly that provides re-irradiation capability after interim discharge and reconstitution of the test pin bundle has been developed for use in the Fast Flux Test Facility (FFTF). This test vehicle permits irradiation test data to be obtained at multiple exposures on a few select test pins without the substantial expense of fabricating individual test assemblies as would otherwise be required. A variety of test pin types can be loaded in the reusable test assembly. A reusable test vehicle for irradiation testing in the FFTF has long been desired, but a number of obstacles previously prevented the implementation of such an experimental rig. The MFF-8A test assembly employs a 169-pin bundle using HT-9 alloy for duct and cladding material. The standard driver pins in the fuel bundle are sodium-bonded metal fuel (U-10 wt% Zr). Thirty-seven positions in the bundle are replaceable pin positions. Standard MFF-8A driver pins can be loaded in any test pin location to fill the bundle if necessary. Application of the MFF-8A reusable test assembly in the FFTF constitutes a considerable cost-saving measure with regard to irradiation testing. Only a few well-characterized test pins need be fabricated to conduct a test program rather than constructing entire test assemblies

  11. TESS Lens-Bezel Assembly Modal Testing

    Science.gov (United States)

    Dilworth, Brandon J.; Karlicek, Alexandra

    2017-01-01

    The Transiting Exoplanet Survey Satellite (TESS) program, led by the Kavli Institute for Astrophysics and Space Research at the Massachusetts Institute of Technology (MIT) will be the first-ever spaceborne all-sky transit survey. MIT Lincoln Laboratory is responsible for the cameras, including the lens assemblies, detector assemblies, lens hoods, and camera mounts. TESS is scheduled to be launched in August of 2017 with the primary goal to detect small planets with bright host starts in the solar neighborhood, so that detailed characterizations of the planets and their atmospheres can be performed. The TESS payload consists of four identical cameras and a data handling unit. Each camera consists of a lens assembly with seven optical elements and a detector assembly with four charge-coupled devices (CCDs) including their associated electronics. The optical prescription requires that several of the lenses are in close proximity to a neighboring element. A finite element model (FEM) was developed to estimate the relative deflections between each lens-bezel assembly under launch loads to predict that there are adequate clearances preventing the lenses from making contact. Modal tests using non-contact response measurements were conducted to experimentally estimate the modal parameters of the lens-bezel assembly, and used to validate the initial FEM assumptions. Key Words Non-contact measurements, modal analysis, model validation

  12. A novel wild-type Saccharomyces cerevisiae strain TSH1 in scaling-up of solid-state fermentation of ethanol from sweet sorghum stalks.

    Directory of Open Access Journals (Sweden)

    Ran Du

    Full Text Available The rising demand for bioethanol, the most common alternative to petroleum-derived fuel used worldwide, has encouraged a feedstock shift to non-food crops to reduce the competition for resources between food and energy production. Sweet sorghum has become one of the most promising non-food energy crops because of its high output and strong adaptive ability. However, the means by which sweet sorghum stalks can be cost-effectively utilized for ethanol fermentation in large-scale industrial production and commercialization remains unclear. In this study, we identified a novel Saccharomyces cerevisiae strain, TSH1, from the soil in which sweet sorghum stalks were stored. This strain exhibited excellent ethanol fermentative capacity and ability to withstand stressful solid-state fermentation conditions. Furthermore, we gradually scaled up from a 500-mL flask to a 127-m3 rotary-drum fermenter and eventually constructed a 550-m3 rotary-drum fermentation system to establish an efficient industrial fermentation platform based on TSH1. The batch fermentations were completed in less than 20 hours, with up to 96 tons of crushed sweet sorghum stalks in the 550-m3 fermenter reaching 88% of relative theoretical ethanol yield (RTEY. These results collectively demonstrate that ethanol solid-state fermentation technology can be a highly efficient and low-cost solution for utilizing sweet sorghum, providing a feasible and economical means of developing non-food bioethanol.

  13. A novel wild-type Saccharomyces cerevisiae strain TSH1 in scaling-up of solid-state fermentation of ethanol from sweet sorghum stalks.

    Science.gov (United States)

    Du, Ran; Yan, Jianbin; Feng, Quanzhou; Li, Peipei; Zhang, Lei; Chang, Sandra; Li, Shizhong

    2014-01-01

    The rising demand for bioethanol, the most common alternative to petroleum-derived fuel used worldwide, has encouraged a feedstock shift to non-food crops to reduce the competition for resources between food and energy production. Sweet sorghum has become one of the most promising non-food energy crops because of its high output and strong adaptive ability. However, the means by which sweet sorghum stalks can be cost-effectively utilized for ethanol fermentation in large-scale industrial production and commercialization remains unclear. In this study, we identified a novel Saccharomyces cerevisiae strain, TSH1, from the soil in which sweet sorghum stalks were stored. This strain exhibited excellent ethanol fermentative capacity and ability to withstand stressful solid-state fermentation conditions. Furthermore, we gradually scaled up from a 500-mL flask to a 127-m3 rotary-drum fermenter and eventually constructed a 550-m3 rotary-drum fermentation system to establish an efficient industrial fermentation platform based on TSH1. The batch fermentations were completed in less than 20 hours, with up to 96 tons of crushed sweet sorghum stalks in the 550-m3 fermenter reaching 88% of relative theoretical ethanol yield (RTEY). These results collectively demonstrate that ethanol solid-state fermentation technology can be a highly efficient and low-cost solution for utilizing sweet sorghum, providing a feasible and economical means of developing non-food bioethanol.

  14. Investigation on the Effect of Kenaf Core and Stalk Fiber on the Medium Density Fiber Board Properties Made of Poplar Fibers

    Directory of Open Access Journals (Sweden)

    Fahimeh SH.Alizadeh

    2012-01-01

    Full Text Available In order to optimize the use of material non-forest resources, in this study the possibility of using the kenaf stalk fibers mixed with poplar fibers in producing medium density fiber board was considered. Variable factors such as density at two levels (0.55, 0.75 g/cm3 and the percentage incorporation of fiber (%50 poplar fibers, - %50 kenaf core fiber, %50 poplar fiber, -% 50 kenaf stalk fiber and %100 poplar fibers were considered. Steaming time and temperature (175°C, 10min, press time and temperature (5 min, 175°C, Pressing pressure (30 kg/cm3, fiber cake moisture (%12 and urea-formaldehyde resin with Concentration of %50 of the study factors were fixed. Results show that adding kenaf core fibers to the poplar fibers increases modulus of elasticity and water absorption but thickness swelling reduces. Increased density in board made with kenaf core has caused increase in bending strength, modulus of elasticity and internal bond strength and their water absorption and thickness swelling after 2 and 24 hours were competitive with poplar (MDF. On the other hand Populus fiber– kenaf stalk board mechanical and physical properties were competitive with (MDF board made of %100 poplar fibers. Finally we can say that according to the statistical analysis, the best treatment in this study was using kenaf core fibers, in making poplar (MDF with 0.75 g/cm3 density.

  15. Blade attachment assembly

    Science.gov (United States)

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  16. Reactor and fuel assembly

    International Nuclear Information System (INIS)

    Ishii, Yoshihiko; Bessho, Yasunori; Sano, Hiroki; Yokomizo, Osamu; Yamashita, Jun-ichi.

    1990-01-01

    The present invention realizes an effective spectral operation by applying an optimum pressure loss coefficient while taking the characteristics of a lower tie plate into consideration. That is, the pressure loss coefficient of the lower tie plate is optimized by varying the cross sectional area of a fuel assembly flow channel in the lower tie plate or varying the surface roughness of a coolant flow channel in the lower tie plate. Since there is a pressure loss coefficient to optimize the moderator density over a flow rate change region, the effect of spectral shift rods can be improved by setting the optimum pressure loss coefficient of the lower tie plate. According to the present invention, existent fuel assemblies can easily be changed successively to fuel assemblies having spectral shift rods of a great spectral shift effect by using existent reactor facilities as they are. (I.S.)

  17. Power module assembly

    Science.gov (United States)

    Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  18. Magnetic nanoparticle assemblies

    CERN Document Server

    Trohidou, Kalliopi N

    2014-01-01

    Magnetic nanoparticles with diameters in the range of a few nanometers are today at the cutting edge of modern technology and innovation because of their use in numerous applications ranging from engineering to biomedicine. A great deal of scientific interest has been focused on the functionalization of magnetic nanoparticle assemblies. The understanding of interparticle interactions is necessary to clarify the physics of these assemblies and their use in the development of high-performance magnetic materials. This book reviews prominent research studies on the static and dynamic magnetic properties of nanoparticle assemblies, gathering together experimental and computational techniques in an effort to reveal their optimized magnetic properties for biomedical use and as ultra-high magnetic recording media.

  19. Reactor fuel assembly

    International Nuclear Information System (INIS)

    Anthony, A.J.; Groves, M.D.

    1980-01-01

    A nuclear reactor fuel assembly having a lower end fitting and actuating means interacting therewith for holding the assembly down on the core support stand against the upward flow of coolant. Locking means for interacting with projections on the support stand are carried by the lower end fitting and are actuated by the movement of an actuating rod operated from above the top of the assembly. In one embodiment of the invention the downward movement of the actuating rod forces a latched spring to move outward into locking engagement with a shoulder on the support stand projections. In another embodiment, the actuating rod is rotated to effect the locking between the end fitting and the projection. (author)

  20. Nuclear fuel assembly

    International Nuclear Information System (INIS)

    Hayashi, Hiroshi; Watari, Yoshio; Hizahara, Hiroshi; Masuoka, Ryuzo.

    1970-01-01

    When exchanging nuclear fuel assemblies during the operation of a nuclear reactor, melting of fuel bodies, and severence of tubular claddings is halted at the time of insertion by furnishing a neutron absorbing material such as B 10 , Cd, Gd or the like at the forward end of the fuel assembly to thereby lower the power peak at the forward ends of the fuel elements to within tolerable levels and thus prevent both fuel liquification and excessive expansion. The neutron absorbing material may be attached in the form of a plate to the fuel assembly forward tie plate, or may be inserted as a pellet into the front end of the tubular cladding. (Owens, K.J.)

  1. Liaison based assembly design

    Energy Technology Data Exchange (ETDEWEB)

    Ames, A.; Kholwadwala, D.; Wilson, R.H.

    1996-12-01

    Liaison Based Assembly Design extends the current information infrastructure to support design in terms of kinematic relationships between parts, or liaisons. These liaisons capture information regarding contact, degrees-of-freedom constraints and containment relationships between parts in an assembly. The project involved defining a useful collection of liaison representations, investigating their properties, and providing for maximum use of the data in downstream applications. We tested our ideas by implementing a prototype system involving extensions to Pro/Engineer and the Archimedes assembly planner. With an expanded product model, the design system is more able to capture design intent. When a product update is attempted, increased knowledge availability improves our ability to understand the effect of design changes. Manufacturing and analysis disciplines benefit from having liaison information available, so less time is wasted arguing over incomplete design specifications and our enterprise can be more completely integrated.

  2. Integrated magnetic transformer assembly

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

  3. Optical Filter Assembly for Interplanetary Optical Communications

    Science.gov (United States)

    Chen, Yijiang; Hemmati, Hamid

    2013-01-01

    Ground-based, narrow-band, high throughput optical filters are required for optical links from deep space. We report on the development of a tunable filter assembly that operates at telecommunication window of 1550 nanometers. Low insertion loss of 0.5 decibels and bandwidth of 90 picometers over a 2000 nanometers operational range of detectors has been achieved.

  4. Transfer of fuel assemblies

    International Nuclear Information System (INIS)

    Vuckovich, M.; Burkett, J. P.; Sallustio, J.

    1984-01-01

    Fuel assemblies of a nuclear reactor are transferred during fueling or refueling or the like by a crane. The work-engaging fixture of the crane picks up an assembly, removes it from this slot, transfers it to the deposit site and deposits it in its slot at the deposit site. The control for the crane includes a strain gauge connected to the crane line which raises and lowers the load. The strain gauge senses the load on the crane. The signal from the strain gauge is compared with setpoints; a high-level setpoint, a low-level setpoint and a slack-line setpoint. If the strain gauge signal exceeds the high-level setpoint, the line drive is disabled. This event may occur during raising of a fuel assembly which encounters resistance. The high-level setpoint may be overridden under proper precautions. The line drive is also disabled if the strain gauge signal is less than the low-level setpoint. This event occurs when a fuel assembly being deposited contacts the bottom of its slot or an obstruction in, or at the entry to the slot. To preclude lateral movement and possible damage to a fuel assembly suspended from the crane line, the traverse drive of the crane is disabled once the strain-gauge exceets the lov-level setpoint. The traverse drive can only be enabled after the strain-gauge signal is less than the slack-line set-point. This occurs when the lines has been set in slack-line setting. When the line is tensioned after slack-li ne setting, the traverse drive remains enabled only if the line has been disconnected from the fuel assembly

  5. Evolution of static allometries: adaptive change in allometric slopes of eye span in stalk-eyed flies.

    Science.gov (United States)

    Voje, Kjetil L; Hansen, Thomas F

    2013-02-01

    Julian Huxley showed that within-species (static) allometric (power-law) relations can arise from proportional growth regulation with the exponent in the power law equaling the factor of proportionality. Allometric exponents may therefore be hard to change and act as constraints on the independent evolution of traits. In apparent contradiction to this, many empirical studies have concluded that static allometries are evolvable. Many of these studies have been based, however, on a broad definition of allometry that includes any monotonic shape change with size, and do not falsify the hypothesis of constrained narrow-sense allometry. Here, we present the first phylogenetic comparative study of narrow-sense allometric exponents based on a reanalysis of data on eye span and body size in stalk-eyed flies (Diopsidae). Consistent with a role in sexual selection, we found strong evidence that male slopes were tracking "optima" based on sexual dimorphism and relative male trait size. This tracking was slow, however, with estimated times of 2-3 million years for adaptation to exceed ancestral influence on the trait. Our results are therefore consistent with adaptive evolution on million-year time scales, but cannot rule out that static allometry may act as a constraint on eye-span adaptation at shorter time scales. © 2012 The Author(s). Evolution© 2012 The Society for the Study of Evolution.

  6. AROMA PROFILE AND ANTIMICROBIAL PROPERTIES OF ALCOHOLIC AND AQUEOUS EXTRACTS FROM ROOT, LEAF AND STALK OF NETTLE (Urtica dioica L.

    Directory of Open Access Journals (Sweden)

    Razzagh Mahmoudi

    2014-12-01

    Full Text Available Medicinal plant can be considered as a great source of new antimicrobial agents due to their enormous therapeutic potential and limited side effects. Nettle (Urtica dioica L. is a widespread and common medicinal plant widely used in traditional medicine. The present study investigates the antimicrobial potency of alcoholic and aqueous extracts of Urtica dioica on some gram positive and negative bacteria and also a particular type of fungi and analyzes the extracts to find the active ingredients by gas chromatography-mass spectroscopy (GC-MS method. Results from disc diffusion assay indicated that water extract of root, leaf and stalk had the highest antimicrobial activity respectively and caused significant inhibition zones in P. vulgaris, L. monocytogenes and K. pneumoniae cultures. Antimicrobial efficacy of ethanol extracts was higher in root extract which caused high growth inhibition zones in P. vulgaris, K. pneumoniae and S. aureus cultures. MBC and MIC experiments of the ethanol extract illustrated that the most powerful antimicrobial effect was related to the stem organ extract on K. pnuomonae and S. aureus bacteria. Highest level of antibacterial effects in root can be due to its higher concentration of contents compared to other organs. Based on these results it can be suggested that Urtica dioica and its water and ethanol extracts have noticeable antimicrobial effects against gram negative, positive and Candida albicans fungi that may be applicable as a prophylactic or therpeutic antimicrobial agent in both human and animals.

  7. Toxicity of essential oils from leaves of Piperaceae species in rice stalk stink bug eggs, Tibraca limbativentris (Hemiptera: Pentatomidae

    Directory of Open Access Journals (Sweden)

    Diones Krinski

    Full Text Available ABSTRACT Tibraca limbativentris to is an important rice pest and occurs in all rice-growing regions of Latin America. The control this insect is accomplished with synthetic chemical insecticides, however, new approaches are needed to reduce risks to the environment, to the natural enemies and also to avoid the onset of insecticides resistance. This study was designed to assess the toxicity of essential oils (EOs from leaves of Piper aduncum, P. gaudichaudianum, P. malacophyllum, P. marginatum and P. tuberculatum (Piperaceae on rice stalk stink bug eggs, T. limbativentris. Essential oils were extracted with steam distillation and dilutions were made for bioassays at concentrations of 0.25; 0.5; 1.0; 2.0 and 4.0%. Essential oils from all species of Piperaceae displayed ovicidal activity. The LC50 values indicated that both younger and older eggs were susceptible to these oils. Ovicidal activity is related to the potential toxicity of several compounds, especially dilapiolle, myristicin, cubebene, α-guaiene, longifolene, prezizane, spathulenol, sabinene and δ-2-carene. Thus, EOs tested showed promising results for use as biorational botanical insecticides.

  8. Performance of Pleurotus pulmonarius mushroom grown on maize stalk residues supplemented with various levels of maize flour and wheat bran

    Directory of Open Access Journals (Sweden)

    Senzosenkosi Surprise MKHIZE

    2017-10-01

    Full Text Available Abstract The use of supplemented agricultural waste in mushroom cultivation can be one of the environmentally friendly strategies for poverty alleviation. The study evaluated the performance of Pleurotus pulmonarius mushroom grown on maize stalk supplemented with varying levels of wheat bran (WB and maize flour (MF. A completely random design was used for the experiments. It was observed that Pleurotus pulmonarius was significantly affected by varying levels of supplementation, as 20% WB supplementation encountered higher contamination. The lower supplementation levels gave significantly shorter colonisation period with better mycelial growth rate (MGR. The 2% MF, 2% WB and 4% WB gave significantly higher MGR and faster colonisation. The shortest pinning time (TP was observed at the first flush with the minimum of 2 days. Higher supplementation levels gave maximum yield and biological efficiency (BE. With further increase of supplementation above a 12% WB and 14% MF, the BE and yield declined. Lower supplementation levels resulted in quicker colonisation period and improved growth rate, whereas high supplementation gave better production in terms of yield and BE. Therefore, for the purpose of maximum production, 12% WB and 14% MF may be recommended while for fast production time, 2% MF and 2% WB are recommended.

  9. Performance of Pleurotus ostreatus mushroom grown on maize stalk residues supplemented with various levels of maize flour and wheat bran

    Directory of Open Access Journals (Sweden)

    Senzosenkosi Surprise MKHIZE

    Full Text Available Abstract Improving the performance of mushroom in terms of high production and fast growth rate is essential in mushroom cultivation. In the present study the performance of Pleurotus ostreatus was evaluated using varying levels of wheat bran (WB and maize flour (MF. The results indicated that Pleurotus ostreatus was highly influenced by different levels of supplementation, with 8% WB, 18% WB and 2% MF having higher contamination rate. The low levels of supplementation gave significantly better mycelial growth rate (MGR and shorter colonisation period as observed that the control had highest MGR whereby 20% MF had lowest MGR. The pinning time (TP was shortest at the first flush with minimum of 3 days (12% MF. The higher levels of supplementation showed maximum biological efficiency (BE such as 14% MF, 12% WB and 14% WB. The yield was also higher at high levels of supplementation such as 20% MF and 8% MF being the exception in the lower levels. Based on the results it was observed that for fast production of oyster mushroom there is no need to supplement the maize stalk substrate but for improved productivity supplements can be added up to certain limits such as 14% MF and 12 WB.

  10. Removal of chromophore in enzymatic hydrolysis by acid precipitation to improve the quality of xylo-oligosaccharides from corn stalk.

    Science.gov (United States)

    Wang, Yue-Hai; Zhang, Jie; Qu, Yong-Shui; Li, Hong-Qiang

    2018-02-01

    As the most representative functional sugar, the application areas and market demands of xylo-oligosaccharides (XOS) have been expanding year by year. Owing to the complex structure of corn stalk (CS), XOS obtained from CS are accompanied by problems such as low purity and high color value, which degrade the product. To improve the quality of XOS from CS, the enzymatic hydrolysis was precipitated by acid; then, the ethanol elution concentration was systematically investigated after optimizing the adsorption conditions. The results showed that the purity of XOS was increased to 87.28% from 67.31%, and the color value was decreased to 1050 from 4682 when the acid precipitation pH was 2. On the basis of acid precipitation, if the corresponding optimal conditions of XOS adsorption and elution were used, the highest purity of XOS was 97.87% obtained, with the lowest color value, 780, which reached the standard of the commercial XOS. Copyright © 2017. Published by Elsevier Ltd.

  11. Conversion of corn stalk into furfural using a novel heterogeneous strong acid catalyst in γ-valerolactone.

    Science.gov (United States)

    Xu, Zhiping; Li, Wenzhi; Du, Zhijie; Wu, Hao; Jameel, Hasan; Chang, Hou-Min; Ma, Longlong

    2015-12-01

    A novel solid acid catalyst was prepared by the copolymerization of p-toluenesulfonic acid and paraformaldehyde and then characterized by FT-IR, TG/DTG, HRTEM and N2-BET. Furfural was successfully produced by the dehydration of xylose and xylan using the novel catalyst in γ-valerolactone. This investigation focused on effects of various reaction conditions including solvent, acid catalyst, reaction temperature, residence time, water concentration, xylose loading and catalyst dosage on the dehydration of xylose to furfural. It was found that the solid catalyst displayed extremely high activity for furfural production. 80.4% furfural yield with 98.8% xylose conversion was achieved at 170°C for 10 min. The catalyst could be recycled at least five times without significant loss of activity. Furthermore, 83.5% furfural yield and 19.5% HMF yield were obtained from raw corn stalk under more severe conditions (190°C for 100 min). Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. The Effect of Different Treatments on Seed Dormancy Breaking of Weed Stalked Bur Grass Tragus racemosus (L. AlI.

    Directory of Open Access Journals (Sweden)

    Gholam reza doraki

    2017-01-01

    Full Text Available Introduction: Stalked Bur Grass (Tragus racemosus L. is an angiosperm annual plant with C4 photosynthesis pathway and stolon. It grows in hot and dry summers. This plant spreaded throughout the world from hot regions of Africa. It is regularly seen in barren lands or in between the generations with sequential initial stages with light-texture soils. Seed dormancy is in fact a physiological phenomenon which is observed in the seeds of most crops, pasture plants, medicinal herbs and weeds. Dormancy allows the plant to guarantee its germination and survival for long years and to survive through adverse environmental conditions through its spatial and temporal spread. Materials and Methods: In order to evaluation dormancy break of Tragus racemosus L. seeds, an experiment was carried out based a Randomized Complete Block Design with four replications in research laboratory of Department of Agriculture, Birjand University during 2013. The initial experiments showed that the seeds of Stalked Bur Grass had initial dormancy and were unable to germinate at normal conditions, so that less than 5% of the seeds germinated. The studied treatments for breaking seeds dormancy included control (seeds disinfection by distilled water, wet chilling at 4°C for 1, 2, 3 and 4 weeds, treatment with H2SO4 at 97% for 20, 40, 60 and 80 seconds, treatment with KNO3 at 0.2, 0.4, 0.6 and 0.8% for 24 hours and treatment with Gibberellic acid (GA3 at 50, 100, 200 and 400 ppm. In this study, 25 seeds of Stalked Bur Grass were uniformly placed in petri dishes with the diameters of 9 cm on Watmann filter papers and were applied with 5 mL distilled water. The number of germinated seeds was counted on a daily basis for 21 days. In the end, germination percentage and rate was determined. Results and Discussion: The results revealed that the effect of all studied levels of all treatments were significant on germination percentage and rate. The highest germination percentage (76% was

  13. Life cycle assessment of fuel ethanol produced from soluble sugar in sweet sorghum stalks in North China

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Ning; Yang, Yang; Cai, Hao; Liu, Jingru; Ren, Lantian; Yang, Jianxin; Xie, Guang Hui

    2017-09-01

    This paper describes the results of a life cycle assessment of sweet sorghum stalk (SSS)-based ethanol in North China. We determined the environmental performance of SSS-based ethanol and examined its advantages and disadvantages, as compared to gasoline, focusing on the life cycle of feedstock production, transportation, ethanol production and distribution, and use. The GREET transportation model and the method developed by the Centre of Environmental Sciences at Leiden University (CML method) were used to compile a life cycle inventory and to assess environmental impacts. Results indicate that SSS-based ethanol has advantages in terms of energy consumption, with a well to wheel decrease of 85% fossil energy and 44% global warming potential, as compared with gasoline. Abiotic depletion potential, acidification potential, and photochemical ozone creation potential were also 50–90% lower than in the case of gasoline, while human health toxic potential was 36% lower. However, SSS-based sorghum did not have advantages over gasoline in terms of life cycle cost, land use, and water consumption. Results indicate that such an evaluation cannot just consider a few types of environmental impacts, researchers should promote systematic and comprehensive life cycle assessment of ethanol to guide the development of an energy strategy for China.

  14. Drying of restructured chips made from the old stalks of Asparagus officinalis: impact of different drying methods.

    Science.gov (United States)

    Liu, Zhenbin; Zhang, Min; Wang, Yuchuan

    2016-06-01

    Old stalks of Asparagus officinalis, which account for one third of the total length of each spear, are always discarded as waste. To make full use of the resource, a kind of restructured Asparagus officinalis chip was made. The effects of pulse-spouted microwave-assisted vacuum drying (PSMVD), microwave-assisted vacuum drying (MVD) and vacuum drying (VD) on texture, color and other quality parameters of restructured chips were then studied to obtain high-quality dried chips. Results indicated that the drying time was significantly affected by drying methods, and PSMVD had much better drying uniformity than MVD. The expansion ratio and crispness of chips increased with increasing microwave power and vacuum degree. The browning reaction of samples in VD was more serious, which was confirmed by the results of color test and electronic nose. The PSMVD drying method showed much better drying uniformity than MVD. The dried chips obtained by PSMVD showed optimal quality and were more readily accepted by consumers. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

  15. Low-cost adsorbent prepared from sewage sludge and corn stalk for the removal of COD in leachate.

    Science.gov (United States)

    He, Ying; Liao, Xiaofeng; Liao, Li; Shu, Wei

    2014-01-01

    Sewage sludge (SS) with corn stalk (CS) was used to prepare SS-based activated carbon (SAC) by pyrolysis with ZnCl2. The effects of mixing ratio on surface area and pore size distribution, elemental composition, surface chemistry, and morphology were investigated. The results demonstrated that the addition of CS into SS samples improved the surface area (from 92 to 902 m(2)/g) and the microporosity (from 1.2 to 4.1%) of the adsorbents and, therefore, enhancing the adsorption performance. The removal of leachate chemical oxygen demand (COD) was also determined. It was found that the COD removal rate reached 85% at pH 4 with the SAC (90 wt% CS) dosage of 2% (g/mL) and an adsorption time of 40 min. The adsorption experimental data were fitted by both Langmuir and Freundlich adsorption isotherms. Long-chain alkanes and refractory organics were found in raw leachate, but could be removed by SAC largely.

  16. Comparative study of wet and dry torrefaction of corn stalk and the effect on biomass pyrolysis polygeneration.

    Science.gov (United States)

    Wang, Xianhua; Wu, Jing; Chen, Yingquan; Pattiya, Adisak; Yang, Haiping; Chen, Hanping

    2018-06-01

    Wet torrefaction (WT) possesses some advantages over dry torrefaction (DT). In this study, a comparative analysis of torrefied corn stalk from WT and DT was conducted along with an investigation of their pyrolysis properties under optimal conditions for biomass pyrolysis polygeneration. Compared with DT, WT removed 98% of the ash and retained twice the amount of hydrogen. The impacts of DT and WT on the biomass macromolecular structure was also found to be different using two-dimensional perturbation correlation infrared spectroscopy (2D-PCIS). WT preserved the active hydroxyl groups and rearranged the macromolecule structure to allow cellulose to be more ordered, while DT removed these active hydroxyl groups and formed inter-crosslinking structures in macromolecules. Correspondingly, the bio-char yield after WT was lower than DT but the bio-char quality was upgraded due to high ash removal. Furthermore, higher bio-oil yield, higher sugar content, and higher H 2 generation, were obtained after WT. Copyright © 2018 Elsevier Ltd. All rights reserved.

  17. MoS2 Nanosheets Vertically Grown on Carbonized Corn Stalks as Lithium-Ion Battery Anode.

    Science.gov (United States)

    Ma, Luxiang; Zhao, Binglu; Wang, Xusheng; Yang, Junfeng; Zhang, Xinxiang; Zhou, Yuan; Chen, Jitao

    2018-06-25

    In this study, MoS 2 nanosheets are vertically grown on the inside and outside surfaces of the carbonized corn stalks (CCS) by a simple hydrothermal reaction. The vertically grown structure can not only improve the transmission rate of Li + and electrons but also avoid the agglomeration of the nanosheets. Meanwhile, a new approach of biomass source application is presented. We use CCS instead of graphite powders, which can not only avoid the exploitation of graphite resources, but also be used as a matrix for MoS 2 growth to prevent the electrode from being further decomposed during long cycles and at high current densities. Meanwhile, lithium-ion batteries show remarkable electrochemical performance. They demonstrate a high specific capacity of 1409.5 mA g -1 at 100 mA g -1 in the initial cycle. After 250 cycles, the discharge capacity is still as high as 1230.9 mAh g -1 . Even at 4000 mA g -1 , they show a high specific capacity of 777.7 mAh g -1 . Furthermore, the MoS 2 /CCS electrodes show long cycle life, and the specific capacity is still up to ∼500 mAh g -1 at 5000 mA g -1 after 1000 cycles.

  18. Evaluation of humic substances during co-composting of sewage sludge and corn stalk under different aeration rates.

    Science.gov (United States)

    Li, Shuyan; Li, Danyang; Li, Jijin; Li, Guoxue; Zhang, Bangxi

    2017-12-01

    Sewage sludge and corn stalk were co-composted under different aeration rates 0.12 (AR0.12), 0.24 (AR0.24), 0.36 (AR0.36)L·kg -1 DMmin -1 , respectively. Transformation of humic substance was evaluated by a series of chemical and spectroscopic methods to reveal compost humification. Results showed that aeration rate could significantly affect compost stability and humification process. Humic acid contents in AR0.24 were significantly higher than those in the other two treatments. The final humic acid/fulvic acid ratios in AR0.12, AR0.24 and AR0.36 treatment were 1.0, 1.9 and 0.8, respectively, corresponding to the final E 4 /E 6 of 4.7, 3.2 and 5.5. Moreover, compost in AR0.24 treatment had a high stability degree due to the low C/N atom ratio and high C/H atom ratio. However, it is noteworthy that composting could not significantly affect the structure of HA in a 35-day period. These results indicate that composting with the aeration rate of 0.24L·kg -1 DMmin -1 could accelerated the humification process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Evaluation of a hybrid anaerobic biofilm reactor treating winery effluents and using grape stalks as biofilm carrier.

    Science.gov (United States)

    Wahab, Mohamed Ali; Habouzit, Frédéric; Bernet, Nicolas; Jedidi, Naceur; Escudié, Renaud

    2016-01-01

    Wine production processes generate large amount of both winery wastewater and solid wastes. Furthermore, working periods, volumes and pollution loads greatly vary over the year. Therefore, it is recommended to develop a low-cost treatment technology for the treatment of winery effluents taking into account the variation of the organic loading rate (OLR). Accordingly, we have investigated the sequential operation of an anaerobic biofilm reactor treating winery effluents and using grape stalks (GSs) as biofilm carrier with an OLR ranging from 0.65 to 27 gCOD/L/d. The result showed that, during the start-up with wastewater influent, the chemical oxygen demand (COD) removal rate ranged from 83% to 93% and was about 91% at the end of the start-up period that lasted for 40 days. After 3 months of inactivity period of the reactor (no influent feeding), we have succeeded in restarting-up the reactor in only 15 days with a COD removal of 82% and a low concentration of volatile fatty acids (1 g/L), which confirms the robustness of the reactor. As a consequence, GSs can be used as an efficient carrier support, allowing a fast reactor start-up, while the biofilm conserves its activity during a non-feeding period. The proposed hybrid reactor thus permits to treat both winery effluents and GSs.

  20. Growth rate variation of the stalked barnacle Pollicipes pollicipes (Crustacea: Cirripedia using calcein as a chemical marker

    Directory of Open Access Journals (Sweden)

    David Jacinto

    2015-03-01

    Full Text Available This study describes the use of calcein as a chemical tagging methodology to estimate growth rate variation of the stalked barnacle Pollicipes pollicipes, an ecologically important intertidal species and economic resource, in SW Portugal. Calcein tagging had a high success rate (94% in marking both juvenile and adult barnacles for a period of 2.5 months, providing a valuable method for obtaining reliable data in growth studies of P. pollicipes. Growth rate decreased with barnacle size and was highly variable amongst individuals, particularly in smaller barnacles. No effect of shore level on barnacle growth was detected. Growth rates were higher in smaller juvenile barnacles, peaking at a 1.1-mm monthly increment in rostro-carinal length (RC for individuals with RC=5 mm, and decreased with barnacle size (monthly growth rates of 0.5 mm for adult barnacles with RC~12.5 mm. Growth rates observed in adults with commercial interest (RC ≥ 18 mm was < 0.25 mm per month. The advantages of tagging P. pollicipes with calcein were the possibility of mass marking individual barnacles of different size cohorts within a short period (less than 1 day of manipulation; and reduced time of fieldwork, which is very important because this species inhabits very exposed rocky shores.