Local similar solution of MHD stagnation point flow in Carreau fluid over a non-linear stretched surface with double stratified medium

Directory of Open Access Journals (Sweden)

M. Farooq

Full Text Available This article studies MHD double stratified stagnation point flow of Carreau fluid towards a non linear stretchable surface with radiation. Features of heat and mass transfer are evaluated by using convective boundary conditions. Resulting nonlinear problems are solved and studied for the velocity, temperature and concentration fields. Heat and mass transfer rates in addition to skin friction are discussed. Besides this for the verification of the present findings, the results of presented analysis have been compared with the available works in particular situations and reasonable agreement is noted. Keywords: Convective boundary condition, Thermal radiation, Double stratification, Stagnation point flow

Structure and temperature distribution of a stagnation-point Diesel spray premixed flame

International Nuclear Information System (INIS)

Lin, J.-C.; Lin, Ta-Hui

2005-01-01

We experimentally examine the flow and flame characteristics of a stagnation point premixed flame influenced by Diesel sprays. In the experiment, distributions of drop size, drop axial velocity and its fluctuation as well as the gas phase temperature are measured by using the phase-doppler particle analyzer and a thin thermocouple. As might be expected, similar to the gasoline spray flame, the partially prevaporized Diesel spray flame is composed of a weak blue flame zone, indicating the burning of methane fuel, and a strongly luminous zone containing many bright yellow lines showing the passages of burning Diesel drops. It is found that the axial temperature profiles at various radial positions consist of an upstream preheat region, a maximum temperature downstream of the blue flame and a downstream region with a declined temperature curve because of the heat loss to the quartz plate. The SMD of the drops increases from the upstream preheat region to a maximum near the blue flame and then decreases in the downstream burning zone. Along the axial position, the drops are decelerated in front of the flame but accelerated when passing through the blue flame. It is also interesting to note that the radial distributions of SMD and number density of drops in the upstream region are mainly influenced by small drops flowing outward, since the upstream vaporization of Diesel drops is very limited; while those in the downstream region should be influenced by both small drops flowing outward and Diesel drops burning. From the experimental observations, there are impinging and bouncing of Diesel drops downstream of the spray flame near the quartz plate, resulting in a small amount of soot and carbon deposits on the wall. These interesting phenomena will be reported in the near future

Stagnation point flow towards nonlinear stretching surface with Cattaneo-Christov heat flux

Science.gov (United States)

Hayat, T.; Zubair, M.; Ayub, M.; Waqas, M.; Alsaedi, A.

2016-10-01

Here the influence of the non-Fourier heat flux in a two-dimensional (2D) stagnation point flow of Eyring-Powell liquid towards a nonlinear stretched surface is reported. The stretching surface is of variable thickness. Thermal conductivity of fluid is taken temperature-dependent. Ordinary differential systems are obtained through the implementation of meaningful transformations. The reduced non-dimensional expressions are solved for the convergent series solutions. Convergence interval is obtained for the computed solutions. Graphical results are displayed and analyzed in detail for the velocity, temperature and skin friction coefficient. The obtained results reveal that the temperature gradient enhances when the thermal relaxation parameter is increased.

On the Analytical Solution of Non-Orthogonal Stagnation Point Flow towards a Stretching Sheet

DEFF Research Database (Denmark)

Kimiaeifar, Amin; Bagheri, G. H.; Barari, Amin

2011-01-01

An analytical solution for non-orthogonal stagnation point for the steady flow of a viscous and incompressible fluid is presented. The governing nonlinear partial differential equations for the flow field are reduced to ordinary differential equations by using similarity transformations existed...... in the literature and are solved analytically by means of the Homotopy Analysis Method (HAM). The comparison of results from this paper and those published in the literature confirms the precise accuracy of the HAM. The resulting analytical equation from HAM is valid for entire physical domain and effective...

Analysis of stagnation point flow of an upper-convected Maxwell fluid

Directory of Open Access Journals (Sweden)

Joseph E. Paullet

2017-12-01

Full Text Available Several recent papers have investigated the two-dimensional stagnation point flow of an upper-convected Maxwell fluid by employing a similarity change of variable to reduce the governing PDEs to a nonlinear third order ODE boundary value problem (BVP. In these previous works, the BVP was studied numerically and several conjectures regarding the existence and behavior of the solutions were made. The purpose of this article is to mathematically verify these conjectures. We prove the existence of a solution to the BVP for all relevant values of the elasticity parameter. We also prove that this solution has monotonically increasing first derivative, thus verifying the conjecture that no ``overshoot'' of the boundary condition occurs. Uniqueness results are presented for a large range of parameter space and bounds on the skin friction coefficient are calculated.

Linear stability analysis of laminar flow near a stagnation point in the slip flow regime

Science.gov (United States)

Essaghir, E.; Oubarra, A.; Lahjomri, J.

2017-12-01

The aim of the present contribution is to analyze the effect of slip parameter on the stability of a laminar incompressible flow near a stagnation point in the slip flow regime. The analysis is based on the traditional normal mode approach and assumes parallel flow approximation. The Orr-Sommerfeld equation that governs the infinitesimal disturbance of stream function imposed to the steady main flow, which is an exact solution of the Navier-Stokes equation satisfying slip boundary conditions, is obtained by using the powerful spectral Chebyshev collocation method. The results of the effect of slip parameter K on the hydrodynamic characteristics of the base flow, namely the velocity profile, the shear stress profile, the boundary layer, displacement and momentum thicknesses are illustrated and discussed. The numerical data for these characteristics, as well as those of the eigenvalues and the corresponding wave numbers recover the results of the special case of no-slip boundary conditions. They are found to be in good agreement with previous numerical calculations. The effects of slip parameter on the neutral curves of stability, for two-dimensional disturbances in the Reynolds-wave number plane, are then obtained for the first time in the slip flow regime for stagnation point flow. Furthermore, the evolution of the critical Reynolds number against the slip parameter is established. The results show that the critical Reynolds number for instability is significantly increased with the slip parameter and the flow turn out to be more stable when the effect of rarefaction becomes important.

Melting heat transfer in boundary layer stagnation-point flow towards a stretching/shrinking sheet

International Nuclear Information System (INIS)

Bachok, Norfifah; Ishak, Anuar; Pop, Ioan

2010-01-01

An analysis is carried out to study the steady two-dimensional stagnation-point flow and heat transfer from a warm, laminar liquid flow to a melting stretching/shrinking sheet. The governing partial differential equations are converted into ordinary differential equations by similarity transformation, before being solved numerically using the Runge-Kutta-Fehlberg method. Results for the skin friction coefficient, local Nusselt number, velocity profiles as well as temperature profiles are presented for different values of the governing parameters. Effects of the melting parameter, stretching/shrinking parameter and Prandtl number on the flow and heat transfer characteristics are thoroughly examined. Different from a stretching sheet, it is found that the solutions for a shrinking sheet are non-unique.

Impacts of Anthropogenic Aerosols on Regional Climate: Extreme Events, Stagnation, and the United States Warming Hole

Science.gov (United States)

Mascioli, Nora R.

temperature response pattern in AER and GHG is characterized by strong responses over the western U.S. and weak or opposite signed responses over the southeast U.S., raising the question of whether the observed U.S. "warming hole" could have a forced component. To address this question, I systematically examine observed seasonal temperature trends over all time periods of at least 10 years during 1901-2015. In the northeast and southern U.S., significant summertime cooling occurs from the early 1950s to the mid 1970s, which I partially attribute to increasing anthropogenic aerosol emissions (median fraction of the observed temperature trends explained is 0.69 and 0.17, respectively). In winter, the northeast and southern U.S. cool significantly from the early 1950s to the early 1990s, which I attribute to long-term phase changes in the North Atlantic Oscillation and the Pacific Decadal Oscillation. Rather than being a single phenomenon stemming from a single cause, both the warming hole and its dominant drivers vary by season, region, and time period. Finally, I examine historical and projected future changes in atmospheric stagnation. Stagnation, which is characterized by weak winds and an absence of precipitation, is a meteorological contributor to heat waves, extreme pollution, and drought. Using CM3, I show that regional stagnation trends over the historical period (1860-2005) are driven by changes in anthropogenic aerosol emissions, rather than rising greenhouse gases. In the northeastern and central United States, aerosol-induced changes in surface and upper level winds produce significant decreases in the number of stagnant summer days, while decreasing precipitation in the southeast US increases the number of stagnant summer days. Outside of the U.S., significant drying over eastern China in response to rising aerosol emissions contributed to increased stagnation during 1860-2005. Additionally, this region was found to be particularly sensitive to changes in local

Thermophysical analysis for three-dimensional MHD stagnation-point flow of nano-material influenced by an exponential stretching surface

Directory of Open Access Journals (Sweden)

Fiaz Ur Rehman

2018-03-01

Full Text Available In the present paper a theoretical investigation is performed to analyze heat and mass transport enhancement of water-based nanofluid for three dimensional (3D MHD stagnation-point flow caused by an exponentially stretched surface. Water is considered as a base fluid. There are three (3 types of nanoparticles considered in this study namely, CuO (Copper oxide, Fe3O4 (Magnetite, and Al2O3 (Alumina are considered along with water. In this problem we invoked the boundary layer phenomena and suitable similarity transformation, as a result our three dimensional non-linear equations of describing current problem are transmuted into nonlinear and non-homogeneous differential equations involving ordinary derivatives. We solved the final equations by applying homotopy analysis technique. Influential outcomes of aggressing parameters involved in this study, effecting profiles of temperature field and velocity are explained in detail. Graphical results of involved parameters appearing in considered nanofluid are presented separately. It is worth mentioning that Skin-friction along x and y-direction is maximum for Copper oxide-water nanofluid and minimum for Alumina-water nanofluid. Result for local Nusselt number is maximum for Copper oxide-water nanofluid and is minimum for magnetite-water nanofluid. Keywords: Heat transfer, Nanofluids, Stagnation-point flow, Three-dimensional flow, Nano particles, Boundary layer

Stagnation point flow and heat transfer over a nonlinear shrinking sheet with slip effects

Directory of Open Access Journals (Sweden)

N.F. Fauzi

2015-12-01

Full Text Available In this paper, an investigation is performed to analyze the effects of the slip parameters A and B on the steady stagnation-point flow and heat transfer due to a shrinking sheet in a viscous and incompressible fluid. Using similarity transformations, the governing boundary layer equations are transformed into the nonlinear ordinary (similar differential equations. The transformed equations are solved numerically using the shooting method. The dual solutions for velocity and temperature distribution exist for certain values of the positive constant velocity and temperature slip parameters. Likewise, a stability analysis has been performed to find the nature of the dual solutions. The velocity slip will delay the boundary layer separation whereas the temperature slip does not affect the boundary layer separation.

Response of air stagnation frequency to anthropogenically enhanced radiative forcing

International Nuclear Information System (INIS)

Horton, Daniel E; Diffenbaugh, Noah S; Harshvardhan

2012-01-01

Stagnant atmospheric conditions can lead to hazardous air quality by allowing ozone and particulate matter to accumulate and persist in the near-surface environment. By changing atmospheric circulation and precipitation patterns, global warming could alter the meteorological factors that regulate air stagnation frequency. We analyze the response of the National Climatic Data Center (NCDC) air stagnation index (ASI) to anthropogenically enhanced radiative forcing using global climate model projections of late-21st century climate change (SRESA1B scenario). Our results indicate that the atmospheric conditions over the highly populated, highly industrialized regions of the eastern United States, Mediterranean Europe, and eastern China are particularly sensitive to global warming, with the occurrence of stagnant conditions projected to increase by 12–25% relative to late-20th century stagnation frequencies (3–18 + days yr −1 ). Changes in the position/strength of the polar jet, in the occurrence of light surface winds, and in the number of precipitation-free days all contribute to more frequent late-21st century air mass stagnation over these high-population regions. In addition, we find substantial inter-model spread in the simulated response of stagnation conditions over some regions using either native or bias corrected global climate model simulations, suggesting that changes in the atmospheric circulation and/or the distribution of precipitation represent important sources of uncertainty in the response of air quality to global warming. (letter)

Investigation of Three-Dimensional Axisymmetric Unsteady Stagnation-Point Flow and Heat Transfer Impinging on an Accelerated Flat Plate

OpenAIRE

ali shokrgozar abbasi; Asghar Baradaran Rahimi; Hamidreza Mozayeni

2016-01-01

General formulation and solution of Navier-Stokes and energy equations are sought in the study of threedimensional axisymmetric unsteady stagnation-point flow and heat transfer impinging on a flat plate when the plate is moving with variable velocity and acceleration towards the main stream or away from it. As an application, among others, this accelerated plate can be assumed as a solidification front which is being formed with variable velocity. An external fluid, along z - directi...

New optical method for heat flux measurements in stagnation point laminar methane/air flames and hydrogen/methane/air flames using thermographic phosphors

Energy Technology Data Exchange (ETDEWEB)

Elmnefi, Mohamed Salem

2010-11-24

In the present study, a new optical method was implemented to study the heat transfer from flat stagnation point flames which can be regarded as one-dimensional in the central part. Premixed methane-air flames and hydrogen-methane-air flames were investigated. The effects of burner-to-plate distance and the fresh gas mixture velocity on heat transfer were examined. Experiments were performed using light induced phosphorescence from thermographic phosphors to study the wall temperatures and heat fluxes of nearly one-dimensional flat premixed flames impinging upward normally on a horizontal water cooled circular flat plate. The investigated flames were stoichiometric, lean and rich laminar methane/air flames with different equivalence ratios of {phi} =1, {phi} = 0.75 and {phi} = 1.25 and stoichiometric laminar hydrogen/methane/air flames. Mixtures of air with 10, 25, 50 and 75 % hydrogen in methane (CH{sub 4}) as well as a pure hydrogen flames at ambient pressure were investigated. The central part of this plate was an alumina ceramic plate coated from both sides with chromium doped alumina (ruby) and excited with a Nd:YAG laser or a green light emitting diode (LED) array to measure the wall temperature from both sides and thus the heat flux rate from the flame. The outlet velocity of the gases was varied from 0.1 m/s to 1.2 m/s. The burner to plate distance ranged from 0.5 to 2 times the burner exit diameter (d = 30 mm).The accuracy of the method was evaluated. The measured heat flux indicate the change of the flame stabilization mechanism from a burner stabilized to a stagnation plate stabilized flame. The results were compared to modeling results of a one dimensional stagnation point flow, with a detailed reaction mechanism. In order to prove the model, also measured gas phase temperatures by OH LIF for a stoichiometric stagnation point flame were discussed. It turns out that the flame stabilization mechanism and with it the heat fluxes change from low to high

MHD stagnation point flow by a permeable stretching cylinder with Soret-Dufour effects

Institute of Scientific and Technical Information of China (English)

M Ramzan; M Farooq; T Hayat; A Alsaedi; J Cao

2015-01-01

Combined effects of Soret (thermal-diffusion) and Dufour (diffusion-thermo) in MHD stagnation point flow by a permeable stretching cylinder were studied. Analysis was examined in the presence of heat generation/absorption and chemical reaction. The laws of conservation of mass, momentum, energy and concentration are found to lead to the mathematical development of the problem. Suitable transformations were used to convert the nonlinear partial differential equations into the ordinary differential equations. The series solutions of boundary layer equations through momentum, energy and concentration equations were obtained. Convergence of the developed series solutions was discussed via plots and numerical values. The behaviors of different physical parameters on the velocity components, temperature and concentration were obtained. Numerical values of Nusselt number, skin friction and Sherwood number with different parameters were computed and analyzed. It is found that Dufour and Soret numbers result in the enhancement of temperature and concentration distributions, respectively.

Aggregate demand, functional finance and secular stagnation

DEFF Research Database (Denmark)

Skott, Peter

2016-01-01

This paper makes three main points. Fiscal policy, first, may be needed in the long run to maintain full employment and avoid secular stagnation. If fiscal policy is used in this way, second, the long-run debt ratio depends (i) inversely on the rate of growth, (ii) inversely on government consump...

Nested separatrices in simple shear flows: the effect of localized disturbances on stagnation lines

OpenAIRE

Wilson, M.C.T.; Gaskell, P.H.; Savage, M.D.

2005-01-01

The effects of localized two-dimensional disturbances on the structure of shear flows featuring a stagnation line are investigated. A simple superposition of a planar Couette flow and Moffatt's [J. Fluid Mech. 18, 1--18 (1964)] streamfunction for the decay of a disturbance between infinite stationary parallel plates shows that in general the stagnation line is replaced by a chain of alternating elliptic and hyperbolic stagnation points with a separation equal to 2.78 times the half-gap betwee...

Flame stabilization and mixing characteristics in a Stagnation Point Reverse Flow combustor

Science.gov (United States)

Bobba, Mohan K.

A novel combustor design, referred to as the Stagnation Point Reverse-Flow (SPRF) combustor, was recently developed that is able to operate stably at very lean fuel-air mixtures and with low NOx emissions even when the fuel and air are not premixed before entering the combustor. The primary objective of this work is to elucidate the underlying physics behind the excellent stability and emissions performance of the SPRF combustor. The approach is to experimentally characterize velocities, species mixing, heat release and flame structure in an atmospheric pressure SPRF combustor with the help of various optical diagnostic techniques: OH PLIF, chemiluminescence imaging, PIV and Spontaneous Raman Scattering. Results indicate that the combustor is primarily stabilized in a region downstream of the injector that is characterized by low average velocities and high turbulence levels; this is also the region where most of the heat release occurs. High turbulence levels in the shear layer lead to increased product entrainment levels, elevating the reaction rates and thereby enhancing the combustor stability. The effect of product entrainment on chemical timescales and the flame structure is illustrated with simple reactor models. Although reactants are found to burn in a highly preheated (1300 K) and turbulent environment due to mixing with hot product gases, the residence times are sufficiently long compared to the ignition timescales such that the reactants do not autoignite. Turbulent flame structure analysis indicates that the flame is primarily in the thin reaction zones regime throughout the combustor, and it tends to become more flamelet like with increasing distance from the injector. Fuel-air mixing measurements in case of non-premixed operation indicate that the fuel is shielded from hot products until it is fully mixed with air, providing nearly premixed performance without the safety issues associated with premixing. The reduction in NOx emissions in the SPRF

Thermo-diffusion effects on MHD stagnation point flow towards a stretching sheet in a nanofluid

Directory of Open Access Journals (Sweden)

Umar Khan

2014-09-01

Full Text Available Thermodiffusion effects on stagnation point flow of a nanofluid towards a stretching surface with applied magnetic field is presented. Similarity transforms are applied to reduce the equations that govern the flow to a system of nonlinear ordinary differential equations. Runge-Kutta-Fehlberg method is applied to solve the system. Results are compared with existing solutions that are special cases to our problem. Concrete graphical analysis is carried out to study the effects of different emerging parameters such as stretching ratio A, magnetic influence parameter M, Prandtl number Pr, Lewis number Le, Brownian motion parameter Nb, thermophoresis parameter Nt, nanofluid Lewis number Ln, modified Dufour parameter Nd and Dufour solutal number Ld coupled with comprehensive discussions. Numerical effects of local Nusselt number, local Sherwood number and nanofluid Sherwood number are also discussed.

An automatic, stagnation point based algorithm for the delineation of Wellhead Protection Areas

Science.gov (United States)

Tosco, Tiziana; Sethi, Rajandrea; di Molfetta, Antonio

2008-07-01

Time-related capture areas are usually delineated using the backward particle tracking method, releasing circles of equally spaced particles around each well. In this way, an accurate delineation often requires both a very high number of particles and a manual capture zone encirclement. The aim of this work was to propose an Automatic Protection Area (APA) delineation algorithm, which can be coupled with any model of flow and particle tracking. The computational time is here reduced, thanks to the use of a limited number of nonequally spaced particles. The particle starting positions are determined coupling forward particle tracking from the stagnation point, and backward particle tracking from the pumping well. The pathlines are postprocessed for a completely automatic delineation of closed perimeters of time-related capture zones. The APA algorithm was tested for a two-dimensional geometry, in homogeneous and nonhomogeneous aquifers, steady state flow conditions, single and multiple wells. Results show that the APA algorithm is robust and able to automatically and accurately reconstruct protection areas with a very small number of particles, also in complex scenarios.

Nonlinear radiative heat transfer to stagnation-point flow of Sisko fluid past a stretching cylinder

Energy Technology Data Exchange (ETDEWEB)

Khan, Masood [Department of Mathematics, Quaid-i-Azam University, Islamabad 44000 (Pakistan); Malik, Rabia, E-mail: rabiamalik.qau@gmail.com [Department of Mathematics, Quaid-i-Azam University, Islamabad 44000 (Pakistan); Department of Mathematics and Statistics, International Islamic University Islamabad 44000 (Pakistan); Hussain, M. [Department of Sciences and Humanities, National University of Computer and Emerging Sciences, Islamabad 44000 (Pakistan)

2016-05-15

In the present paper, we endeavor to perform a numerical analysis in connection with the nonlinear radiative stagnation-point flow and heat transfer to Sisko fluid past a stretching cylinder in the presence of convective boundary conditions. The influence of thermal radiation using nonlinear Rosseland approximation is explored. The numerical solutions of transformed governing equations are calculated through forth order Runge-Kutta method using shooting technique. With the help of graphs and tables, the influence of non-dimensional parameters on velocity and temperature along with the local skin friction and Nusselt number is discussed. The results reveal that the temperature increases however, heat transfer from the surface of cylinder decreases with the increasing values of thermal radiation and temperature ratio parameters. Moreover, the authenticity of numerical solutions is validated by finding their good agreement with the HAM solutions.

Nonlinear radiative heat transfer to stagnation-point flow of Sisko fluid past a stretching cylinder

Directory of Open Access Journals (Sweden)

Masood Khan

2016-05-01

Full Text Available In the present paper, we endeavor to perform a numerical analysis in connection with the nonlinear radiative stagnation-point flow and heat transfer to Sisko fluid past a stretching cylinder in the presence of convective boundary conditions. The influence of thermal radiation using nonlinear Rosseland approximation is explored. The numerical solutions of transformed governing equations are calculated through forth order Runge-Kutta method using shooting technique. With the help of graphs and tables, the influence of non-dimensional parameters on velocity and temperature along with the local skin friction and Nusselt number is discussed. The results reveal that the temperature increases however, heat transfer from the surface of cylinder decreases with the increasing values of thermal radiation and temperature ratio parameters. Moreover, the authenticity of numerical solutions is validated by finding their good agreement with the HAM solutions.

Melting heat transfer in stagnation point flow of carbon nanotubes towards variable thickness surface

Directory of Open Access Journals (Sweden)

T. Hayat

2016-01-01

Full Text Available This work concentrates on the mathematical modeling for stagnation point flow of nanofluids over an impermeable stretching sheet with variable thickness. Carbon nanotubes [single-wall carbon nanotubes (SWCNTs and multi-wall carbon nanotubes (MWCNTs] as the nanoparticles are utilized. Water and kerosene oil are taken as the base fluids. Heat transfer through melting effect is discussed. Transformation procedure is adapted to obtain the non-linear ordinary differential equations from the fundamental laws of mass, linear momentum and energy. The optimal values of convergence control parameters and corresponding individual and total residual errors for SWCNTs and MWCNTs are computed by means of homotopy analysis method (HAM based BVPh 2.0. Characteristics of different involved parameters on the velocity, temperature, skin friction coefficient and Nusselt number are discussed. Higher velocity profile is observed for wall thickness parameter in case of water carbon nanotubes when compared with the kerosene oil carbon nanotubes.

A vortex ring interacting with a vortex filament and its deformation near the two-dimensional stagnation point

International Nuclear Information System (INIS)

Kiya, M.; Sato, T.

1986-01-01

In this paper the interaction between vortex filaments and vortex rings and the deformation of vortex rings near the two-dimensional stagnation point are simulated by a three-dimensional vortex method. The two problems are respectively concerned with the effect of free-stream turbulence on turbulent plane mixing layers and the production of turbulence by the vortex stretching near saddles associated with large-scale coherent structures. The authors assume that the first step to understand the free-stream turbulence effect is to study the interaction between a vortex ring and a vortex filament and that the process of deformation of a vortex ring gives us a clue to understand physical processes occurring near the saddles

Unsteady mixed convection flow of a micro-polar fluid near the stagnation point on a vertical surface

Energy Technology Data Exchange (ETDEWEB)

Lok, Y.Y. [Center for Academic Services, Kolej Universiti Teknikal Kebangsaan Malaysia, 75450 Ayer Keroh, Melaka (Malaysia); Amin, N. [Department of Mathematics, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor (Malaysia); Pop, I. [Faculty of Mathematics, University of Cluj, R-3400 Cluj, CP 253 (Romania)

2006-12-15

The unsteady mixed convection boundary-layer flow of a micro-polar fluid near the region of the stagnation point on a double-infinite vertical flat plate is studied. It is assumed that the unsteadiness is caused by the impulsive motion of the free stream velocity and by sudden increase or sudden decrease in the surface temperature from the uniform ambient temperature. The problem is reduced to a system of non-dimensional partial differential equations, which is solved numerically using the Keller-box method. This method may present well-behaved solutions for the transient (small time) solution and those of the steady-state flow (large time) solution. It was found that there is a smooth transition from the small-time solution (initial unsteady-state flow) to the large-time solution (final steady-state flow). Further, it is shown that for both assisting and opposing cases and a fixed value of the Prandtl number, the reduced steady-state skin friction and the steady-state heat transfer from the wall (or Nusselt number) decrease with the increase of the material parameter. On the other hand, it is shown that with the increase of the Prandtl number and a fixed value of the material parameter, the reduced steady-state skin friction decreases when the flow is assisting and it increases when the flow is opposing. (author)

Analytical study of the non orthogonal stagnation point flow of a micro polar fluid

Directory of Open Access Journals (Sweden)

M. Ali. Abbas

2017-01-01

Full Text Available In this paper we consider the steady two dimensional flow of micro polar fluids on a flat plate. The flow under discussion is the modified Hiemenz flow for a micro polar fluid which occurs in the hjkns + skms boundary layer near an orthogonal stagnation point. The full governing equation reduced to a modified Hiemenz flow. The solution to the boundary value problem is governed by two non dimensional parameters, the material parameter K and the ratio of the micro rotation to skin friction parameter n. The obtained nonlinear coupled ordinary differential equations are solved by using the Homotopy perturbation method. Comparison between numerical and analytical solutions of the problem is shown in tables form for different values of the governing parameters K and n. Effects of the material parameter K on the velocity profile and microrotation profiles for different cases of n are discussed graphically as well as numerically. Velocity profile decreases as the material parameter K increases and the microrotation profile increases as the material parameter K increases for different cases of n.

On the Electron Diffusion Region in Asymmetric Reconnection with a Guide Magnetic Field

Science.gov (United States)

Hesse, Michael; Liu, Yi-Hsin; Chen, Li-Jen; Bessho, Naoki; Kuznetsova, Masha; Birn, Joachim; Burch, James L.

2016-01-01

Particle-in-cell simulations in a 2.5-D geometry and analytical theory are employed to study the electron diffusion region in asymmetric reconnection with a guide magnetic field. The analysis presented here demonstrates that similar to the case without guide field, in-plane flow stagnation and null of the in-plane magnetic field are well separated. In addition, it is shown that the electric field at the local magnetic X point is again dominated by inertial effects, whereas it remains dominated by nongyrotropic pressure effects at the in-plane flow stagnation point. A comparison between local electron Larmor radii and the magnetic gradient scale lengths predicts that distribution should become nongyrotropic in a region enveloping both field reversal and flow stagnation points. This prediction is verified by an analysis of modeled electron distributions, which show clear evidence of mixing in the critical region.

Heat transfer in boundary layer stagnation-point flow towards a shrinking sheet with non-uniform heat flux

International Nuclear Information System (INIS)

Bhattacharyya Krishnendu

2013-01-01

In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types: direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations (PDEs) are transformed into non linear self-similar ordinary differential equations (ODEs) by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting

Electron Distribution Functions in the Diffusion Region of Asymmetric Magnetic Reconnection

Science.gov (United States)

Bessho, N.; Chen, L.-J.; Hesse, M.

2016-01-01

We study electron distribution functions in a diffusion region of antiparallel asymmetric reconnection by means of particle-in-cell simulations and analytical theory. At the electron stagnation point, the electron distribution comprises a crescent-shaped population and a core component. The crescent-shaped distribution is due to electrons coming from the magnetosheath toward the stagnation point and accelerated mainly by electric field normal to the current sheet. Only a part of magnetosheath electrons can reach the stagnation point and form the crescent-shaped distribution that has a boundary of a parabolic curve. The penetration length of magnetosheath electrons into the magnetosphere is derived. We expect that satellite observations can detect crescent-shaped electron distributions during magnetopause reconnection.

Variations in the Spatial Distribution of Areas of Economic Growth and Stagnation in Poland: Determinants and Consequences

Directory of Open Access Journals (Sweden)

Churski Paweł

2014-06-01

Full Text Available This study seeks to identify the spatial distribution of and changes in areas of economic growth and stagnation in Poland resulting from spatial differences in the process of the country’s socio-economic advancement. The research covered two spatial systems, NUTS 2 and NUTS 4, and embraced the following steps: (1 identification of the spatial distribution of areas of economic growth and stagnation, by region and subregion, and of its determinants; (2 analysis of variations in the spatial distribution of areas of economic growth and stagnation, by region and subregion, and of its consequences; and (3 conclusions from the development trajectories identified and recommendations for intervention measures to be taken under cohesion policy.

Numerical study of unsteady MHD oblique stagnation point flow and heat transfer due to an oscillating stream

Science.gov (United States)

Javed, T.; Ghaffari, A.; Ahmad, H.

2016-05-01

The unsteady stagnation point flow impinging obliquely on a flat plate in presence of a uniform applied magnetic field due to an oscillating stream has been studied. The governing partial differential equations are transformed into dimensionless form and the stream function is expressed in terms of Hiemenz and tangential components. The dimensionless partial differential equations are solved numerically by using well-known implicit finite difference scheme named as Keller-box method. The obtained results are compared with those available in the literature. It is observed that the results are in excellent agreement with the previous studies. The effects of pertinent parameters involved in the problem namely magnetic parameter, Prandtl number and impinging angle on flow and heat transfer characteristics are illustrated through graphs. It is observed that the influence of magnetic field strength increases the fluid velocity and by the increase of obliqueness parameter, the skin friction increases.

Stagnation point flow on bioconvection nanofluid over a stretching/shrinking surface with velocity and thermal slip effects

Science.gov (United States)

Chan, Sze Qi; Aman, Fazlina; Mansur, Syahira

2017-09-01

Nanofluid containing nanometer sized particles has become an ideal thermal conductivity medium for the flow and heat transfer in many industrial and engineering applications due to their high rate of heat transfer. However, swimming microorganisms are imposed into the nanofluid to overcome the instability of nanoparticles due to a bioconvection phenomenon. This paper investigates the stagnation point flow on bioconvection heat transfer of a nanofluid over a stretching/shrinking surface containing gyrotactic microorganisms. Velocity and thermal slip effects are the two conditions incorporated into the model. Similarity transformation is applied to reduce the governing nonlinear partial differential equations into the nonlinear ordinary differential equations. The transformed equations are then solved numerically. The results are displayed in the form of graphs and tables. The effects of these governing parameters on the skin friction coefficient, local Nusselt number, local Sherwood number and the local density of the motile microorganisms are analysed and discussed in details.

Slab Penetration vs. Slab Stagnation: Mantle Reflectors as an Indicator

Science.gov (United States)

Okeler, A.; Gu, Y. J.; Schultz, R.; Contenti, S. M.

2011-12-01

Subducting oceanic lithosphere along convergent margins may stagnate near the base of the upper mantle or penetrate into the lower mantle. These dynamic processes cause extensive thermal and compositional variations, which can be observed in terms of impedance contrast (reflectivity) and topography of mantle transition zone (MTZ) discontinuities, i.e., 410- and 660-km discontinuities. In this study, we utilize ~ 15000 surface-reflected shear waves (SS) and their precursory arrivals (S410S and S660S) to analyze subduction related deformations on mantle reflectivity structure. We apply pre-stack, time-to-depth migration technique to SS precursors, and move weak underside reflections using PREM-predicted travel-time curves. Common Mid-point gathers are formed to investigate structure under the western Pacific, south America, and Mediterranean convergent boundaries. In general, mantle reflectivity structures are consistent with previous seismic tomography models. In regions of slab penetration (e.g., southern Kurile arc, Aegean Sea), our results show 1) a substantial decrease in S660S amplitude, and 2) strong lower mantle reflector(s) at ~ 900 km depth. These reflective structures are supported by zones of high P and S velocities extending into the lower mantle. Our 1-D synthetic simulations suggest that the decreasing S660S amplitudes are, at least partially, associated with shear wave defocusing due to changes in reflector depth (by ±20 km) within averaging bin. Assuming a ~500 km wide averaging area, a dipping reflector with 6-8 % slope can reduce the amplitude of a SS precursor by ~50%. On the other hand, broad depressions with strong impedance contrast at the base of the MTZ characterize the regions of slab stagnation, such as beneath the Tyrrhenian Sea and northeastern China. For the latter region, substantial topography on the 660-km discontinuity west of the Wadati-Benioff zone suggests that the stagnant part of the Pacific plate across Honshu arc is not

Stagnation morphology in Magnetized Liner Inertial Fusion experiments

Science.gov (United States)

Gomez, M. R.; Harding, E. C.; Ampleford, D. J.; Jennings, C. A.; Awe, T. J.; Chandler, G. A.; Glinsky, M. E.; Hahn, K. D.; Hansen, S. B.; Jones, B.; Knapp, P. F.; Martin, M. R.; Peterson, K. J.; Rochau, G. A.; Ruiz, C. L.; Schmit, P. F.; Sinars, D. B.; Slutz, S. A.; Weis, M. R.; Yu, E. P.

2017-10-01

In Magnetized Liner Inertial Fusion (MagLIF) experiments on the Z facility, an axial current of 15-20 MA is driven through a thick metal cylinder containing axially-magnetized, laser-heated deuterium fuel. The cylinder implodes, further heating the fuel and amplifying the axial B-field. Instabilities, such as magneto-Rayleigh-Taylor, develop on the exterior of the liner and may feed through to the inner surface during the implosion. Monochromatic x-ray emission at stagnation shows the stagnation column is quasi-helical with axial variations in intensity. Recent experiments demonstrated that the stagnation emission structure changed with modifications to the target wall thickness. Additionally, applying a thick dielectric coating to the exterior of the target modified the stagnation column. A new version of the x-ray self-emission diagnostic has been developed to investigate stagnation with higher resolution. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

Boundary layer theory approach to the concentration layer adjacent to the ceiling wall of a hydrogen leakage: Axisymmetric impinging and far regions

Energy Technology Data Exchange (ETDEWEB)

El-Amin, M.F.; Kanayama, H. [Department of Mechanical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395 (Japan)

2009-02-15

As hydrogen leaks into a partially open space with a ceiling wall, a boundary layer of hydrogen can be constructed under that wall due to the impingement on the wall and the buoyancy force. The resulting boundary layer can be divided into two regions, namely the stagnation-point region and the far region. When the geometry of the source of the hydrogen leak is circular, such as a pinhole or an o-ring, the behavior of leakage flow will be axisymmetric due to the resulting radial jet. In contrast, when the geometry of the source of the hydrogen leak is planar, such as a crack, the behavior of leakage flow will be planar due to the resulting planar jet. Previously, we studied the planar case in the context of both the stagnation-point flow region [El-Amin MF, Kanayama H. Boundary layer theory approach to the concentration layer adjacent to a ceiling wall at impinging region of a hydrogen leakage. Int J Hydrogen Energy 2008; 33(21): 6393-00] and the far region [El-Amin MF, Inoue M, Kanayama H. Boundary layer theory approach to the concentration layer adjacent to a ceiling wall of a hydrogen leakage: far region. Int J Hydrogen Energy 2008; 33(24):7642-7]. This paper is concerned with both the stagnation-point flow region and the far region of the axisymmetric concentration boundary layer adjacent to a ceiling wall. Flow in the stagnation-point region is treated as Hiemenz flow, while it is treated as Blasius flow in the far region. The current results are compared with the planar cases [El-Amin MF, Kanayama H. Boundary layer theory approach to the concentration layer adjacent to a ceiling wall at impinging region of a hydrogen leakage. Int J Hydrogen Energy 2008; 33(21): 6393-00; El-Amin MF, Inoue M, Kanayama H. Boundary layer theory approach to the concentration layer adjacent to a ceiling wall of a hydrogen leakage: far region. Int J Hydrogen Energy 2008; 33(24):7642-7] for both stagnation-point flow and far regions. Both momentum and concentration boundary layer

Analysis Of Convective Plane Stagnation Point Chemically Reactive Mhd Flow Past A Vertical Porous Plate With A Convective Boundary Condition In The Presence Of A Uniform Magnetic Field.

OpenAIRE

Adeniyan, A.,

2013-01-01

The numerical investigation of a stagnation point boundary layer flow , mass and heat transfer of a steady two dimensional , incompressible , viscous electrically conducting, chemically reacting laminar fluid over a vertical convectively heated , electrically neutral flat plate exposed to a transverse uniform magnetic field has been carried out to examine the influence of the simultaneous presence of the effects of a convective boundary condition, chemical reaction, heat transfer and suctio...

Climatic and technological ceilings for Chinese rice stagnation based on yield gaps and yield trend pattern analysis.

Science.gov (United States)

Zhang, Tianyi; Yang, Xiaoguang; Wang, Hesong; Li, Yong; Ye, Qing

2014-04-01

Climatic or technological ceilings could cause yield stagnation. Thus, identifying the principal reasons for yield stagnation within the context of the local climate and socio-economic conditions are essential for informing regional agricultural policies. In this study, we identified the climatic and technological ceilings for seven rice-production regions in China based on yield gaps and on a yield trend pattern analysis for the period 1980-2010. The results indicate that 54.9% of the counties sampled experienced yield stagnation since the 1980. The potential yield ceilings in northern and eastern China decreased to a greater extent than in other regions due to the accompanying climate effects of increases in temperature and decreases in radiation. This may be associated with yield stagnation and halt occurring in approximately 49.8-57.0% of the sampled counties in these areas. South-western China exhibited a promising scope for yield improvement, showing the greatest yield gap (30.6%), whereas the yields were stagnant in 58.4% of the sampled counties. This finding suggests that efforts to overcome the technological ceiling must be given priority so that the available exploitable yield gap can be achieved. North-eastern China, however, represents a noteworthy exception. In the north-central area of this region, climate change has increased the yield potential ceiling, and this increase has been accompanied by the most rapid increase in actual yield: 1.02 ton ha(-1) per decade. Therefore, north-eastern China shows a great potential for rice production, which is favoured by the current climate conditions and available technology level. Additional environmentally friendly economic incentives might be considered in this region. © 2013 John Wiley & Sons Ltd.

Technological Progress, Globalization, and Secular Stagnation

Directory of Open Access Journals (Sweden)

Popović Milenko

2018-01-01

Full Text Available After the 2008 crisis, despite economic recovery that started in 2009, the world economy has experienced a downward shift of its growth path and a consequent decline. As shown at the beginning of this paper, this shift and growth rate stagnation are totally attributable to the economic dynamics in developed economies, the USA and the EU. Explanations of this phenomenon can be divided into two large groups: explanations that belong to the demand side and those that belong to the supply side. The aim of this paper is to give a critical survey of the most important explanations for the ongoing growth stagnation in developed countries and consequently in the entire world economy. This ongoing prolonged stagnation can only be explained by looking at both, the demand and supply sides of the explanation, and particularly by taking a closer look at the interaction between aggregate demand and aggregate supply. In other words, secular stagnation manifests itself as a problem of the limitation of long run growth of aggregate demand. However, in order to explain the causes of those demand limitations, we have to undertake a careful analysis of the supply side dynamics, especially the dynamics of innovations, which bring us to circular and cumulative causation. In order to explain the numerous consequences of this stagnation and to solve some important puzzles, like the productivity paradox for example, a special emphasis is given to the analysis of deindustrialization and the consequent strange reoccurrence of a dual economy within most developed countries during the period of the IT revolution and hyper-globalization. It will also be shown that this new dual economy presents serious limitations for further technological advancement and economic development, quite contrary to the old dualism which contributed to an acceleration of economic growth.

Stagnation and interpenetration of laser-created colliding plasmas

Energy Technology Data Exchange (ETDEWEB)

Pollaine, S.M.; Albritton, J.R.; Kauffman, R.; Keane, C.J. (Lawrence Livermore National Lab., CA (USA)); Berger, R.L.; Bosch, R.; Delameter, N.D.; Failor, B.H. (KMS Fusion, Inc., Ann Arbor, MI (USA))

1990-11-05

A KMS laser experiment collides Aluminum (A1) and Magnesium (Mg) plasmas. The measurements include electron density, time and space resolved Ly-alpha and He-alpha lines of Al and Mg, and x-ray images. These measurements were analyzed with a hydrodynamic code, LASNEX, and a special two-fluid code OFIS. The results strongly suggest that at early times, the Al interpenetrates the counterstreaming Mg and deposits in the dense Mg region. At late times, the Al plasma stagnates against the Mg plasma.

Modeling study of rarefied gas effects on hypersonic reacting stagnation flows

Science.gov (United States)

Wang, Zhihui; Bao, Lin

2014-12-01

Recent development of the near space hypersonic sharp leading vehicles has raised a necessity to fast and accurately predict the aeroheating in hypersonic rarefied flows, which challenges our understanding of the aerothermodynamics and aerothermochemistry. The present flow and heat transfer problem involves complex rarefied gas effects and nonequilibrium real gas effects which are beyond the scope of the traditional prediction theory based on the continuum hypothesis and equilibrium assumption. As a typical example, it has been found that the classical Fay-Riddell equation fails to predict the stagnation point heat flux, when the flow is either rarefied or chemical nonequilibrium. In order to design a more general theory covering the rarefied reacting flow cases, an intuitive model is proposed in this paper to describe the nonequilibrium dissociation-recombination flow along the stagnation streamline towards a slightly blunted nose in hypersonic rarefied flows. Some characteristic flow parameters are introduced, and based on these parameters, an explicitly analytical bridging function is established to correct the traditional theory to accurately predict the actual aeroheating performance. It is shown that for a small size nose in medium density flows, the flow at the outer edge of the stagnation point boundary layer could be highly nonequilibrium, and the aeroheating performance is distinguished from that of the big blunt body reentry flows at high altitudes. As a result, when the rarefied gas effects and the nonequilibrium real gas effects are both significant, the classical similarity law could be questionable, and it is inadequate to directly analogize results from the classical blunt body reentry problems to the present new generation sharp-leading vehicles. In addition, the direct simulation Monte Carlo method is also employed to validate the conclusion.

Effects of variable properties on MHD heat and mass transfer flow near a stagnation point towards a stretching sheet in a porous medium with thermal radiation

Science.gov (United States)

M. Salem, A.; Rania, Fathy

2012-05-01

The effect of variable viscosity and thermal conductivity on steady magnetohydrodynamic (MHD) heat and mass transfer flow of viscous and incompressible fluid near a stagnation point towards a permeable stretching sheet embedded in a porous medium are presented, taking into account thermal radiation and internal heat genberation/absorbtion. The stretching velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The governing fundamental equations are first transformed into a system of ordinary differential equations using a scaling group of transformations and are solved numerically by using the fourth-order Rung—Kutta method with the shooting technique. A comparison with previously published work has been carried out and the results are found to be in good agreement. The results are analyzed for the effect of different physical parameters, such as the variable viscosity and thermal conductivity, the ratio of free stream velocity to stretching velocity, the magnetic field, the porosity, the radiation and suction/injection on the flow, and the heat and mass transfer characteristics. The results indicate that the inclusion of variable viscosity and thermal conductivity into the fluids of light and medium molecular weight is able to change the boundary-layer behavior for all values of the velocity ratio parameter λ except for λ = 1. In addition, the imposition of fluid suction increases both the rate of heat and mass transfer, whereas fluid injection shows the opposite effect.

Effects of variable properties on MHD heat and mass transfer flow near a stagnation point towards a stretching sheet in a porous medium with thermal radiation

International Nuclear Information System (INIS)

Salem, A. M.; Fathy, Rania

2012-01-01

The effect of variable viscosity and thermal conductivity on steady magnetohydrodynamic (MHD) heat and mass transfer flow of viscous and incompressible fluid near a stagnation point towards a permeable stretching sheet embedded in a porous medium are presented, taking into account thermal radiation and internal heat genberation/absorbtion. The stretching velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The governing fundamental equations are first transformed into a system of ordinary differential equations using a scaling group of transformations and are solved numerically by using the fourth-order Rung—Kutta method with the shooting technique. A comparison with previously published work has been carried out and the results are found to be in good agreement. The results are analyzed for the effect of different physical parameters, such as the variable viscosity and thermal conductivity, the ratio of free stream velocity to stretching velocity, the magnetic field, the porosity, the radiation and suction/injection on the flow, and the heat and mass transfer characteristics. The results indicate that the inclusion of variable viscosity and thermal conductivity into the fluids of light and medium molecular weight is able to change the boundary-layer behavior for all values of the velocity ratio parameter λ except for λ = 1. In addition, the imposition of fluid suction increases both the rate of heat and mass transfer, whereas fluid injection shows the opposite effect. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

Numerical modeling of time-dependent bio-convective stagnation flow of a nanofluid in slip regime

Directory of Open Access Journals (Sweden)

Rakesh Kumar

Full Text Available A numerical investigation of unsteady stagnation point flow of bioconvective nanofluid due to an exponential deforming surface is made in this research. The effects of Brownian diffusion, thermophoresis, slip velocity and thermal jump are incorporated in the nanofluid model. By utilizing similarity transformations, the highly nonlinear partial differential equations governing present nano-bioconvective boundary layer phenomenon are reduced into ordinary differential system. The resultant expressions are solved for numerical solution by employing a well-known implicit finite difference approach termed as Keller-box method (KBM. The influence of involved parameters (unsteadiness, bioconvection Schmidt number, velocity slip, thermal jump, thermophoresis, Schmidt number, Brownian motion, bioconvection Peclet number on the distributions of velocity, temperature, nanoparticle and motile microorganisms concentrations, the coefficient of local skin-friction, rate of heat transport, Sherwood number and local density motile microorganisms are exhibited through graphs and tables. Keywords: Unsteadiness, Bio-convection, Slip regime, Stagnation point flow, Numerical modeling

Recirculation, stagnation and ventilation: The 2014 legionella episode

Science.gov (United States)

Russo, Ana; Soares, Pedro M. M.; Gouveia, Célia M.; Cardoso, Rita M.; Trigo, Ricardo M.

2017-04-01

period covering the 2014 event (7-25 November 2014). Hourly zonal (u) and meridional (v) wind components were retrieved from hindcast regional climate simulation covering the whole Iberian Peninsula (IP) with a spatial resolution of 9 km. This simulation was performed with the WRF model and for this study, the u and v components were extracted for a set of 12 points of the simulation grid around Lisbon. The preliminary results regarding the average daily critical transport indices for the 1989-2007 period clearly indicate that the airshed is prone to ventilation as these events have a dominant presence through most of the study period (72%), relatively to the occurrence of recirculation (10%) and stagnation (<2%) events. Comparatively to the 1989-2007 period, the 2014 episode is truly exceptional. [1] Allwine KJ, Whiteman CD., 1994. Atmospheric Environment 28: 713-721. [2] Blystad H, Brantsæter AB, Løvoll Ø., 2005. Eurosurveillance weekly release, 10(5) [3] Nguyen T, Ilef D, Jarraud S, Rouil L, Campese C, Che D, Haeghebaert S, Ganiayre F, Marcel F, Etienne J, Desenclos J-C, 2006. The Journal of Infectious Diseases, 193, 1, 102-111. [4] Mohan M, Bhati S. 2012. Journal of Civil & Environmental Engineering, S1:003.

Institutionel stagnation i hertugdømmet Slesvig 1840-1860

DEFF Research Database (Denmark)

Clausen, Thomas

2017-01-01

This article provides a study of the framework conditions for trade and industry in the Duchy of Schleswig in the middle of the 19th century. Grounded on theory of institutional economics the main argument of the paper is that Schleswig on a range of parameters suffered from stagnation...... in the development of the economy. The cause of this slowdown had to do with inertia in adaption of important institutional arrangement to the increasing complexity of trade and business. The study concludes that the Duchy, despite a seemingly favorable starting point, lost ground and that the institutional...

Unsteady separated stagnation-point flow and heat transfer of a viscous fluid over a moving flat surface

Science.gov (United States)

Dholey, S.

2018-04-01

In this paper, we have investigated numerically the laminar unsteady separated stagnation-point flow and heat transfer of a viscous fluid over a moving flat surface in the presence of a time dependent free stream velocity which causes the unsteadiness of this flow problem. The plate is assumed to move in the same or opposite direction of the free stream velocity. The flow is therefore governed by the velocity ratio parameter λ (ratio of the plate velocity to the free stream velocity) and the unsteadiness parameter β. When the plate surface moves in the same direction of the free stream velocity (i.e., when λ > 0), the solution of this flow problem continues for any given value of β. On the other hand, when they move in opposite directions (i.e., when λ heat transfer analysis is that for a given value of λ(= 0), first the heat transfer rate increases with the increase of the Prandtl number Pr and after attaining a maximum value, it decreases and finally tends to be zero for large values of Pr depending upon the values of β > 0. On the contrary, for a given value of β(≤ 0), the rate of heat transfer increases consistently with the increase of Pr.

MHD stagnation point flow and heat transfer of a nanofluid over a permeable nonlinear stretching/shrinking sheet with viscous dissipation effect

Science.gov (United States)

Jusoh, Rahimah; Nazar, Roslinda

2018-04-01

The magnetohydrodynamic (MHD) stagnation point flow and heat transfer of an electrically conducting nanofluid over a nonlinear stretching/shrinking sheet is studied numerically. Mathematical modelling and analysis are attended in the presence of viscous dissipation. Appropriate similarity transformations are used to reduce the boundary layer equations for momentum, energy and concentration into a set of ordinary differential equations. The reduced equations are solved numerically using the built in bvp4c function in Matlab. The numerical and graphical results on the effects of various parameters on the velocity and temperature profiles as well as the skin friction coefficient and the local Nusselt number are analyzed and discussed in this paper. The study discovers the existence of dual solutions for a certain range of the suction parameter. The conducted stability analysis reveals that the first solution is stable and feasible, while the second solution is unstable.

Thermophysical analysis for three-dimensional MHD stagnation-point flow of nano-material influenced by an exponential stretching surface

Science.gov (United States)

Ur Rehman, Fiaz; Nadeem, Sohail; Ur Rehman, Hafeez; Ul Haq, Rizwan

2018-03-01

In the present paper a theoretical investigation is performed to analyze heat and mass transport enhancement of water-based nanofluid for three dimensional (3D) MHD stagnation-point flow caused by an exponentially stretched surface. Water is considered as a base fluid. There are three (3) types of nanoparticles considered in this study namely, CuO (Copper oxide), Fe3O4 (Magnetite), and Al2O3 (Alumina) are considered along with water. In this problem we invoked the boundary layer phenomena and suitable similarity transformation, as a result our three dimensional non-linear equations of describing current problem are transmuted into nonlinear and non-homogeneous differential equations involving ordinary derivatives. We solved the final equations by applying homotopy analysis technique. Influential outcomes of aggressing parameters involved in this study, effecting profiles of temperature field and velocity are explained in detail. Graphical results of involved parameters appearing in considered nanofluid are presented separately. It is worth mentioning that Skin-friction along x and y-direction is maximum for Copper oxide-water nanofluid and minimum for Alumina-water nanofluid. Result for local Nusselt number is maximum for Copper oxide-water nanofluid and is minimum for magnetite-water nanofluid.

Behavior of a solar collector loop during stagnation

DEFF Research Database (Denmark)

Chen, Ziqian; Dragsted, Janne; Furbo, Simon

2015-01-01

A mathematical model simulating the emptying behavior of a pressurized solar collector loop with solar collectors with a good emptying behavior is developed and validated with measured data. The calculated results are in good agreement with the measured results. The developed simulation model...... is therefore suitable to determine the behavior of a solar collector loop during stagnation. A volume ratio R, which is the ratio of the volume of the vapour in the upper pipes of the solar collector loop during stagnation and the fluid content of solar collectors, is introduced to determine the mass...... of the collector fluid pushed into the expansion vessel during stagnation, Min. A correlation function for the mass Min and the volume ratio R for solar collector loops is obtained. The function can be used to determine a suitable size of expansion vessels for solar collector loops....

Mixed convection stagnation-point flow of nanofluids over a stretching/shrinking sheet in a porous medium with internal heat generation/absorption

Directory of Open Access Journals (Sweden)

Dulal Pal

2015-05-01

Full Text Available In this paper, we analyzed the buoyancy-driven radiative non-isothermal heat transfer in a nanofluid stagnation-point flow over a stretching/shrinking sheet embedded in a porous medium.The effects of thermal radiation and internal heat generation/absorption along with suction/injection at the boundary are also considered. Three different types of nanofluids, namely the Copper-water, the Alumina-water and the Titanium dioxide water are considered. The resulting coupled nonlinear differential equations are solved numerically by a fifth-order Runge-Kutta-Fehlberg integration scheme with a shooting technique. A good agreement is found between the present numerical results and the available results in the literature for some special cases. The effects of the physical parameters on the flow and temperature characteristics are presented through tables and graphs, and the salient features are discussed. The results obtained reveal many interesting behaviors that warrant further study on the heat transfer enhancement due to the nanofluids.

Mass flow rate measurements in two-phase mixtrues with stagnation probes

International Nuclear Information System (INIS)

Fincke, J.R.; Deason, V.A.

1979-01-01

Applications of stagnation probes to the measurement of mass flow rate in two-phase flows are discussed. Descriptions of several stagnation devices, which have been evaluated at the Idaho National Engineering Laboratory, are presented along with modeling techniques and two-phase flow data

Stagnation of ablated metal vapor in laser fusion reactor with liquid wall

International Nuclear Information System (INIS)

Norimatsu, T.; Nagatomo, H.; Azechi, H.; Furukawa, H.; Shimada, Y.; Kurahashi, S.; Kunugi, T.; Kajimura, Y.

2010-11-01

In this paper, formation of clusters by ablated materials and those stagnation at the center of a laser fusion reactor with liquid wall are discussed using improved simulation code DECORE. We will report 1) numerical simulation on formation of clusters immediately before the stagnation, 2) preliminary results on the cluster formation at the first bounce of the stagnation, 3) experimental result on the diameter measurement of micro droplets formed in a simulation experiment with back-side irradiation of laser. (author)

Stability of stagnation via an expanding accretion shock wave

International Nuclear Information System (INIS)

Velikovich, A. L.; Giuliani, J. L.; Murakami, M.; Taylor, B. D.; Zalesak, S. T.; Iwamoto, Y.

2016-01-01

Stagnation of a cold plasma streaming to the center or axis of symmetry via an expanding accretion shock wave is ubiquitous in inertial confinement fusion (ICF) and high-energy-density plasma physics, the examples ranging from plasma flows in x-ray-generating Z pinches [Maron et al., Phys. Rev. Lett. 111, 035001 (2013)] to the experiments in support of the recently suggested concept of impact ignition in ICF [Azechi et al., Phys. Rev. Lett. 102, 235002 (2009); Murakami et al., Nucl. Fusion 54, 054007 (2014)]. Some experimental evidence indicates that stagnation via an expanding shock wave is stable, but its stability has never been studied theoretically. We present such analysis for the stagnation that does not involve a rarefaction wave behind the expanding shock front and is described by the classic ideal-gas Noh solution in spherical and cylindrical geometry. In either case, the stagnated flow has been demonstrated to be stable, initial perturbations exhibiting a power-law, oscillatory or monotonic, decay with time for all the eigenmodes. This conclusion has been supported by our simulations done both on a Cartesian grid and on a curvilinear grid in spherical coordinates. Dispersion equation determining the eigenvalues of the problem and explicit formulas for the eigenfunction profiles corresponding to these eigenvalues are presented, making it possible to use the theory for hydrocode verification in two and three dimensions.

Stability of stagnation via an expanding accretion shock wave

Energy Technology Data Exchange (ETDEWEB)

Velikovich, A. L.; Giuliani, J. L. [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States); Murakami, M. [Institute of Laser Engineering, Osaka University, Osaka 565-0871 (Japan); Taylor, B. D. [Laboratory for Computational Physics and Fluid Dynamics, Naval Research Laboratory, Washington, DC 20375 (United States); Zalesak, S. T. [Berkeley Research Associates, Beltsville, Maryland 20705 (United States); Iwamoto, Y. [Ehime University, Matsuyama, Ehime Pref. 790-8577 (Japan)

2016-05-15

Stagnation of a cold plasma streaming to the center or axis of symmetry via an expanding accretion shock wave is ubiquitous in inertial confinement fusion (ICF) and high-energy-density plasma physics, the examples ranging from plasma flows in x-ray-generating Z pinches [Maron et al., Phys. Rev. Lett. 111, 035001 (2013)] to the experiments in support of the recently suggested concept of impact ignition in ICF [Azechi et al., Phys. Rev. Lett. 102, 235002 (2009); Murakami et al., Nucl. Fusion 54, 054007 (2014)]. Some experimental evidence indicates that stagnation via an expanding shock wave is stable, but its stability has never been studied theoretically. We present such analysis for the stagnation that does not involve a rarefaction wave behind the expanding shock front and is described by the classic ideal-gas Noh solution in spherical and cylindrical geometry. In either case, the stagnated flow has been demonstrated to be stable, initial perturbations exhibiting a power-law, oscillatory or monotonic, decay with time for all the eigenmodes. This conclusion has been supported by our simulations done both on a Cartesian grid and on a curvilinear grid in spherical coordinates. Dispersion equation determining the eigenvalues of the problem and explicit formulas for the eigenfunction profiles corresponding to these eigenvalues are presented, making it possible to use the theory for hydrocode verification in two and three dimensions.

Stability of stagnation via an expanding accretion shock wave

Science.gov (United States)

Velikovich, A. L.; Murakami, M.; Taylor, B. D.; Giuliani, J. L.; Zalesak, S. T.; Iwamoto, Y.

2016-05-01

Stagnation of a cold plasma streaming to the center or axis of symmetry via an expanding accretion shock wave is ubiquitous in inertial confinement fusion (ICF) and high-energy-density plasma physics, the examples ranging from plasma flows in x-ray-generating Z pinches [Maron et al., Phys. Rev. Lett. 111, 035001 (2013)] to the experiments in support of the recently suggested concept of impact ignition in ICF [Azechi et al., Phys. Rev. Lett. 102, 235002 (2009); Murakami et al., Nucl. Fusion 54, 054007 (2014)]. Some experimental evidence indicates that stagnation via an expanding shock wave is stable, but its stability has never been studied theoretically. We present such analysis for the stagnation that does not involve a rarefaction wave behind the expanding shock front and is described by the classic ideal-gas Noh solution in spherical and cylindrical geometry. In either case, the stagnated flow has been demonstrated to be stable, initial perturbations exhibiting a power-law, oscillatory or monotonic, decay with time for all the eigenmodes. This conclusion has been supported by our simulations done both on a Cartesian grid and on a curvilinear grid in spherical coordinates. Dispersion equation determining the eigenvalues of the problem and explicit formulas for the eigenfunction profiles corresponding to these eigenvalues are presented, making it possible to use the theory for hydrocode verification in two and three dimensions.

Soret and Dufour effects on convective heat and mass transfer in stagnation-point flow towards a shrinking surface

International Nuclear Information System (INIS)

Bhattacharyya, Krishnendu; Layek, G C; Seth, G S

2014-01-01

A mathematical model is presented to study the Soret and Dufour effects on the convective heat and mass transfer in stagnation-point flow of viscous incompressible fluid towards a shrinking surface. Suitable similarity transformations are used to convert the governing partial differential equations into self-similarity ordinary differential equations that are then numerically solved by shooting method. Dual solutions for temperature and concentration are obtained in the presence of Soret and Dufour effects. Graphical representations of the heat and mass transfer coefficients, the dimensionless thermal and solute profiles for various values of Prandtl number, Lewis number, Soret number and Dufour number are demonstrated. With Soret number the mass transfer coefficient which is related to mass transfer rate increases for both solutions and the heat transfer coefficient (related to heat transfer rate) for both solutions becomes larger with Dufour number. The Prandtl number causes reduction in heat and the mass transfer coefficients and similarly with the Lewis number mass transfer coefficient decreases. Also, double crossing over is found in dual dimensionless temperature profiles for increasing Soret number and in dual dimensionless concentration profiles for the increase in Dufour number. Due to the larger values of Dufour number the thermal boundary layer increases and for Prandtl number increment it decreases; whereas, the solute boundary layer thickness reduces with increasing values of Prandtl number and Lewis number. (paper)

An experimental study on the influence of water stagnation and temperature change on water quality in a full-scale domestic drinking water system.

Science.gov (United States)

Zlatanović, Lj; van der Hoek, J P; Vreeburg, J H G

2017-10-15

The drinking water quality changes during the transport through distribution systems. Domestic drinking water systems (DDWSs), which include the plumbing between the water meter and consumer's taps, are the most critical points in which water quality may be affected. In distribution networks, the drinking water temperature and water residence time are regarded as indicators of the drinking water quality. This paper describes an experimental research on the influence of stagnation time and temperature change on drinking water quality in a full-scale DDWS. Two sets of stagnation experiments, during winter and summer months, with various stagnation intervals (up to 168 h of stagnation) were carried out. Water and biofilms were sampled at two different taps, a kitchen and a shower tap. Results from this study indicate that temperature and water stagnation affect both chemical and microbial quality in DDWSs, whereas microbial parameters in stagnant water appear to be driven by the temperature of fresh water. Biofilm formed in the shower pipe contained more total and intact cells than the kitchen pipe biofilm. Alphaproteobacteria were found to dominate in the shower biofilm (78% of all Proteobacteria), while in the kitchen tap biofilm Alphaproteobacteria, Betaproteobacteria and Gammaproteobacteria were evenly distributed. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Reference Structures: Stagnation, Progress, and Future Challenges.

Science.gov (United States)

Greenberg, Jane

1997-01-01

Assesses the current state of reference structures in online public access catalogs (OPACs) in a framework defined by stagnation, progress, and future challenges. Outlines six areas for reference structure development. Twenty figures provide illustrations. (AEF)

Effect of ablation geometry on the formation of stagnation layer in laterally colliding plasmas

International Nuclear Information System (INIS)

Mondal, Alamgir; Singh, Rajesh K.; Kumar, Ajai

2015-01-01

Interaction between two parallel propagating plasma plumes have been investigated in two different ablation schemes e.g. laser-blow-off (LBO) of thin film and conventional laser ablation (LPP). Fast imagine technique is used to study the dynamical and geometrical aspect of seed plasmas and induced stagnation layer in between the two expanding seed plasmas. Interaction between the energetic particles, coming from the seed plasmas are responsible for formation of stagnation layer. It has been found that geometrical shape, size, kinetic energy and divergence of plasma plumes are highly dependent on the ablation geometry. These variations in seed plasmas initiate the significant differences in the stagnation layer formed by LBO and LPP geometry. In this presentation, characteristic feature of stagnation layer which includes density, initiation time, emissive life time and geometry in both LBO and LPP geometry are briefly discussed. A comparative study of present results suggests that the plume composition and directionality of seed plasma play crucial role in mechanistic aspect of stagnation layer. (author)

Heat transfer in an axisymmetric stagnation flow at high Reynolds numbers on a cylinder using perturbation techniques

International Nuclear Information System (INIS)

Rahimi, A. B.

2003-01-01

Although there are many papers on the subject of heat transfer in an axisymmetric stagnation flow on a cylinder, the available knowledge is mainly for low Reynolds numbers and not much information exists for the same problem at large Reynolds numbers. In this work, the problem of heat transfer in an axisymmetric stagnation flow on a cylinder is solved at large Reynolds numbers using perturbation techniques. Starting from Navier-Stokes equations within a boundary layer approximation and using similarity transformations, the governing equations are obtained in the form of differential equations. The inverse of the Reynolds number is introduced as the perturbation parameter. This parameter appears in front of the highest-order terms and, as it tends to zero, reduces the order of the governing equations and produces singularities. In this paper, the flow field is divided into two regions; rapid changes in the region near wall and slow changes away from the wall. Thus, the flow is found to have dual-layer characteristics. Using inner and outer expansion produces uniform values of the relevant quantities

Public debt, secular stagnation and functional finance

DEFF Research Database (Denmark)

Skott, Peter

2016-01-01

Fiscal policy and public debt may be required to maintain full employment and avoid secular stagnation. This conclusion emerges from a range of different models, including OLG specifications and stock-flow consistent (post-) Keynesian models. One of the determinants of the required long-run debt ...

Energy-political stagnation or innovation

International Nuclear Information System (INIS)

Kitschelt, H.

1982-01-01

The author discusses the enquete report 1980. He makes an inventory for a political and sociological interpretation of the interim report between meaningful innovation and political insignificance as well as intellectual stagnation. The report is considered as an indicator for the transformation of the energy-political arena in the Federal Republic of Germany over the last years. ''Stagnation'' or ''innovation'' of the argumentation patterns in the report of the enquete commission relate to the question whether the analyses in that document are rather a brake or a motor to a shift of political perspectives in energy policy. A progress can be seen in the report regarding political debate about energy-options in the semi-official political spectrum of the Federal Republic of Germany, in as far as differring options of energy-political development are being acknowledged for the first time. At the same time, debate inside the commission directs the attention to issues of institutional policy in the energy sector. Considering the fights within the commission before the report was agreed on, it seems doubtful if its proposals for compromise will prove a sound political basis. The tensions inside the commission are just a first sign of the power conflicts due above all if the recommendations for energy conservation are intransigently carried out. (orig./HSCH) [de

Solar wind stagnation near comets

International Nuclear Information System (INIS)

Galeev, A.A.; Cravens, T.E.; Gombosi, T.I.

1983-03-01

The nature of the solar wind flow near comets is examined analytically. In particular, the typical values for the stagnation pressure and magnetic barrier strength are estimated, taking into account the magnetic field line tension and the charge exchange cooling of the mass loaded solar wind. Knowledge of the strength of the magnetic barrier is required in order to determine the location of the contact discontinuity which separates the contaminated solar wind plasma and the outflowing plasma of the cometary ionosphere. (author)

THERMOSS: A thermohydraulic model of flow stagnation in a horizontal fuel channel

International Nuclear Information System (INIS)

Gulshani, P.; Caplan, M.Z.; Spinks, N.J.

1984-01-01

A model, called THERMOSS, is developed to compute the duration of stagnation in a CANDU reactor fuel channel with subcooled, stagnant initial conditions. The model solves, in closed form, the one dimensional, two-fluid conservation equations. In the computation of the duration of stagnation, the channel water level is an important intermediate variable because it determines the amount of steam production. A feature of the model is that water level is determined by a momentum balance between frictional pressure drop in the steam phase and hydrostatic head in the liquid phase. This is in contrast to an ealier model in which the level was determined from mass balance considerations. A satisfactory agreement between the predicted and experimentally observed channel water level and duration of stagnation is obtained. (orig.)

Effect of bed configuration on pebble flow uniformity and stagnation in the pebble bed reactor

International Nuclear Information System (INIS)

Gui, Nan; Yang, Xingtuan; Tu, Jiyuan; Jiang, Shengyao

2014-01-01

Highlights: • Pebble flow uniformity and stagnation characteristics are very important for HTR-PM. • Arc- and brachistochrone-shaped configuration effects are studied by DEM simulation. • Best bed configurations with uniform flow and no stagnated pebbles are suggested. • Detailed quantified characteristics of bed configuration effects are shown for explanation. - Abstract: Pebble flow uniformity and stagnation characteristics are very important for the design of pebble bed high temperature gas-cooled reactor. Pebble flows inside some specifically designed contraction configurations of pebble bed are studied by discrete element method. The results show the characteristics of stagnation rates, recycling rates, radial distribution of pebble velocity and residence time. It is demonstrated clearly that the bed with a brachistochrone-shaped configuration achieves optimum levels of flow uniformity and recycling rate concentration, and almost no pebbles are stagnated in the bed. Moreover, the optimum choice among the arc-shaped bed configurations is demonstrated too. Detailed information shows the quantified characteristics of bed configuration effects on flow uniformity. In addition, a good design of the pebble bed configuration is suggested

Implications of the stagnation line model for energy input through the dayside magnetopause

International Nuclear Information System (INIS)

Pudovkin, M.I.; Semenov, V.S.; Heyn, M.F.; Biernat, H.K.

1986-01-01

Based on the formation of a stagnation line at the magnetopause the electromagnetic energy transport from the solar wind into the dayside magnetosphere is analyzed. The resulting energy flux is analyzed. The resulting energy flux is proportional to v/sub infinity/B/sub infinity/sin 2 (theta/sub infinity/-phi/sub infinity/), where v/sub infinity/ and B/sub infinity/ are the solar wind speed and magnetic field and theta/sub infinity/-phi/sub s/infinity is the angle between the IMF and the stagnation line projected into the interplanetary space. A stagnation line parallel to the separator gives approximately the sin 4 (theta/sub infinity//2) energy flux dependence of Akasofu's epsilon-index

Wage Dispersion, Public Sector Wages and the Stagnating Danish Gender Wage Gap

DEFF Research Database (Denmark)

Gupta, Nabanita Datta; Oaxaca, Ronald L.; Smith, Nina

1998-01-01

The gender wage gap in Denmark has virtually stagnated since the early 70s. This study examines whether this stagnation is mainly due to a changing wage dispersion or to changing prices on observed and unobserved skills. Since about half the female labour force is employed in the public sector....... These techniques are applied to a sample of Danish wage earners in the period 1983-94. The decomposition results suggest different explanations behind the stagnation of the gender wage gap in the public and private sectors. The development in average public sector wages is calculated assuming observed......, the impact of the changing wage structure between the public and private sectors is investigated. The analysis is based on the Juhn-Murphy-Pierce decomposition applied to a pooled wage regression model. The equivalence between the former and the Oaxaca-Ransom generalized wage decomposition is established...

Swedish district heating—A system in stagnation: Current and future trends in the district heating sector

International Nuclear Information System (INIS)

Magnusson, Dick

2012-01-01

This paper argues that Sweden’s old and established district heating sector is heading into a stagnation phase. The aim is to analyse the factors influencing this development as well as the strategies used by involved parties to prevent stagnation. Using large technical system theory, I analyse internal and external factors potentially causing stagnation. The most obvious external factors are: an increase in the number of energy-efficient buildings, in response to stricter energy policies, which reduces the future potential for district heating in new and existing buildings; climate change; competition from other heating systems; and market saturation in the key sector, multi-dwelling buildings. The main internal factor is changed business strategies following electricity market deregulation, when energy companies were supposed to be run on businesslike terms. I also argue that stagnation can be defined as occurring when the key measure feature of a system, in this case, heat load is starting to stagnate or decline, even though the trend is positive in other areas. The strategies for avoiding stagnation are various forms of broadening scope, primarily by focusing more on electricity production by building combined heat and power plants, or using the alternative value of the technical system for new applications. - Highlights: ► The Swedish district heating sector is heading into a stage of stagnation. ► The main reasons are: climate change, competition and energy efficient buildings. ► Strategies to change trend: broadening of scope by focusing on electricity in CHP plants. ► Contribution to Large Technical Systems—theory and the later phases of system development.

Numerical analysis for MHD thermal and solutal stratified stagnation point flow of Powell-Eyring fluid induced by cylindrical surface with dual convection and heat generation effects

Science.gov (United States)

Khalil-Ur-Rehman; Malik, M. Y.; Bilal, S.; Bibi, M.

The current analysis reports the untapped characteristics of magneto-hydrodynamic dual convection boundary layer stagnation point flow of Powell-Eyring fluid by way of cylindrical surface. Flow exploration is carried out with the combined effects of thermal and solutal stratification. The strength of temperature and concentration adjacent to the cylindrical surface is assumed to be greater than the ambient fluid. Flow conducting mathematically modelled equations are fairly transformed into system of coupled non-linear ordinary differential equations with the aid of suitable transformations. The computations are made against these resultant coupled equations through shooting technique by the support of fifth order Runge-Kutta algorithm. A parametric study is performed to examine the effect logs of various pertinent flow controlling parameters on the velocity, temperature and concentration flow regime. The achieved outcomes are validated by developing comparison with existing published literature. In addition, numerical values of skin friction coefficient and Nusselt number are presented graphically for two different geometries namely, plate and cylinder.

RELAP4 stagnation properties option

International Nuclear Information System (INIS)

DeYoung, T.L.

1979-01-01

The stagnation properties option in RELAP4/MOD6 was completely reviewed, from theoretical foundation to code application. The result of this investigation was the identification of a fundamental mismatch between the essentially homogeneous, equilibrium-based, RELAP4 code and the nonhomogeneous and/or nonequilibrium critical flow models imposed on the code. By continuously monitoring fluid Mach numbers and adjusting flow areas such that sonic velocity was never exceeded, the mismatch could be accommodated. This approach was implemented, found to work correctly, and will be incorporated into the MOD7 version of the code

Effect of outer stagnation pressure on jet structure in supersonic coaxial jet

International Nuclear Information System (INIS)

Kim, Myoung Jong; Woo, Sang Woo; Lee, Byeong Eun; Kwon, Soon Bum

2001-01-01

The characteristics of dual coaxial jet which composed of inner supersonic nozzle of 26500 in constant expansion rate with 1.91 design Mach number and outer converging one with 40 .deg. C converging angle with the variation of outer nozzle stagnation pressure are experimentally investigated in this paper. In which the stagnation pressure for the inner supersonic nozzle is 750kPa thus, the inner jet leaving the nozzle is slightly underexpanded. The plenum pressure of outer nozzle are varied from 200 to 600kPa. Flow visualizations by shadowgraph method, impact pressure and centerline static pressure measurements of dual coaxial jet are presented. The results show that the presence of outer jet affects significantly the structures and pressure distributions of inner jet. And outer jet causes Mach disk which does not appear for the case of single jet stream. As the stagnation pressure of outer jet increases, impact pressure undulation is severe, but the average impact pressure keeps high far downstream

Using 1D theory to understand 3D stagnation of a wire-array Z pinch in the absence of radiation

Science.gov (United States)

Yu, Edmund

2015-11-01

Many high-energy-density systems implode towards the axis of symmetry, where it collides on itself, forming a hot plasma. However, experiments show these imploding plasmas develop three-dimensional (3D) structures. As a result, the plasma cannot completely dissipate its kinetic energy at stagnation, instead retaining significant 3D flow. A useful tool for understanding the effects of this residual flow is 3D simulation, but the amount and complexity of information can be daunting. To address this problem, we explore the connection between 3D simulation and one-dimensional (1D) theory. Such a connection, if it exists, is mutually beneficial: 1D theory can provide a clear picture of the underlying dynamics of 3D stagnation. On the other hand, deviations between theory and simulation suggest how 1D theory must be modified to account for 3D effects. In this work, we focus on a 3D, magnetohydrodynamic simulation of a compact wire-array Z pinch. To provide a simpler background against which to test our ideas, we artificially turn off radiation during the stagnation phase. Examination of the initial accumulation of mass on axis reveals oblique collision between jets, shock accretion, and vortex formation. Despite evidence for shock-dominated stagnation, a 1D shockless stagnation solution is more appropriate for describing the global dynamics, in that it reproduces the increase of on-axis density with time. However, the 1D solution must be modified to account for 3D effects: the flows suggest enhanced thermal transport as well as centrifugal force. Upon reaching peak compression, the stagnation transitions to a second phase, in which the high-pressure core on axis expands outward into the remaining imploding plasma. During this phase, a 1D shock solution describes the growth of the shock accretion region, as well as the decrease of on-axis density with time. However, the effect of 3D flows is still present: the on-axis temperature does not cool during expansion, which

Nonlinear radiative heat transfer in magnetohydrodynamic (MHD stagnation point flow of nanofluid past a stretching sheet with convective boundary condition

Directory of Open Access Journals (Sweden)

Wubshet Ibrahim

2015-12-01

Full Text Available Two-dimensional boundary layer flow of nanofluid fluid past a stretching sheet is examined. The paper reveals the effect of non-linear radiative heat transfer on magnetohydrodynamic (MHD stagnation point flow past a stretching sheet with convective heating. Condition of zero normal flux of nanoparticles at the wall for the stretched flow is considered. The nanoparticle fractions on the boundary are considered to be passively controlled. The solution for the velocity, temperature and nanoparticle concentration depends on parameters viz. Prandtl number Pr, velocity ratio parameter A, magnetic parameter M, Lewis number Le, Brownian motion Nb, and the thermophoresis parameter Nt. Moreover, the problem is governed by temperature ratio parameter (Nr=TfT∞ and radiation parameter Rd. Similarity transformation is used to reduce the governing non-linear boundary-value problems into coupled higher order non-linear ordinary differential equation. These equations were numerically solved using the function bvp4c from the matlab software for different values of governing parameters. Numerical results are obtained for velocity, temperature and concentration, as well as the skin friction coefficient and local Nusselt number. The results indicate that the skin friction coefficient Cf increases as the values of magnetic parameter M increase and decreases as the values of velocity ratio parameter A increase. The local Nusselt number −θ′(0 decreases as the values of thermophoresis parameter Nt and radiation parameter Nr increase and it increases as the values of both Biot number Bi and Prandtl number Pr increase. Furthermore, radiation has a positive effect on temperature and concentration profiles.

Invalidating stagnation theory for family owned businesses : comparing family-to-family and third party ownership transfers

NARCIS (Netherlands)

Alija Ibrahimovic; Lex van Teeffelen; Roger Heaver

2015-01-01

Miller, Le Breton-Miller and Scholnick (2008) summarize and discuss two major perspectives constructed from the literature on family owned businesses (FOBs): stewardship and stagnation theory. In this paper the stagnation theory is being put to the test on Dutch small/medium enterprises (SMEs).

Self-Generated Magnetic Fields in Stagnation-Phase ICF Implosions

Science.gov (United States)

Walsh, Christopher; Chittenden, Jeremy; McGlinchey, Kristopher; Niasse, Nicolas

2016-10-01

3-D extended-MHD simulations of the stagnation phase of an ICF implosion are presented, showing significant self-generated magnetic fields (1000-5000T) due to the Biermann Battery effect. Perturbed hot-spots generate magnetic fields at their edges, as the extremities of hot bubbles are rapidly cooled by the surrounding low temperature fuel, giving non-parallel electron pressure and density gradients. Larger amplitude and higher mode-number perturbations lead to an increased hot-spot surface area and more heat flow, developing greater non-parallel gradients and therefore larger magnetic fields. Due to this, largely perturbed hot-spots can be affected more by magnetic fields, although the accelerated cooling associated with greater deviations from symmetry lowers magnetisation. The Nernst effect advects magnetic field down temperature gradients towards the outer region of the hot-spot, which can also lower the magnetisation of the plasma. In some regions, however, the Nernst velocity is convergent, magnetising the tips of cold fuel spikes, resulting in anisotropic heat-flow and an improvement in energy containment. Low-mode and multi-high-mode simulations are shown, with magnetisations reaching sufficiently high levels in some regions of the hot-spot to suppress thermal conduction to lower than 50% of the unmagnetised case. A quantitative analysis of how this affects the hot-spot energy balance is included.

Large eddy simulation of premixed and non-premixed combustion in a Stagnation Point Reverse Flow combustor

Science.gov (United States)

Undapalli, Satish

A new combustor referred to as Stagnation Point Reverse Flow (SPRF) combustor has been developed at Georgia Tech to meet the increasingly stringent emission regulations. The combustor incorporates a novel design to meet the conflicting requirements of low pollution and high stability in both premixed and non-premixed modes. The objective of this thesis work is to perform Large Eddy Simulations (LES) on this lab-scale combustor and elucidate the underlying physics that has resulted in its excellent performance. To achieve this, numerical simulations have been performed in both the premixed and non-premixed combustion modes, and velocity field, species field, entrainment characteristics, flame structure, emissions, and mixing characteristics have been analyzed. Simulations have been carried out first for a non-reactive case to resolve relevant fluid mechanics without heat release by the computational grid. The computed mean and RMS quantities in the non-reacting case compared well with the experimental data. Next, the simulations were extended for the premixed reactive case by employing different sub-grid scale combustion chemistry closures: Eddy Break Up (EBU), Artificially Thickened Flame (TF) and Linear Eddy Mixing (LEM) models. Results from the EBU and TF models exhibit reasonable agreement with the experimental velocity field. However, the computed thermal and species fields have noticeable discrepancies. Only LEM with LES (LEMLES), which is an advanced scalar approach, has been able to accurately predict both the velocity and species fields. Scalar mixing plays an important role in combustion, and this is solved directly at the sub-grid scales in LEM. As a result, LEM accurately predicts the scalar fields. Due to the two way coupling between the super-grid and sub-grid quantities, the velocity predictions also compare very well with the experiments. In other approaches, the sub-grid effects have been either modeled using conventional approaches (EBU) or need

The Role of Rumination and Stressful Life Events in the Relationship between the Qi Stagnation Constitution and Depression in Women: A Moderated Mediation Model

Science.gov (United States)

Liu, Qiaosheng

2017-01-01

The qi stagnation constitution is associated with depression in traditional Chinese medicine. It is unclear how rumination and stressful life events affect the relationship between the qi stagnation constitution and depression. The Qi Stagnation Constitution Scale, Ruminative Response Scale, Center for Epidemiologic Studies Depression Scale, and Adolescent Self-Rating Life Events Checklist were used to assess this association in 1200 female college students. The results revealed that the qi stagnation constitution was positively associated with depression. Furthermore, rumination was a partial mediator of the relationship between the qi stagnation constitution and depression. In addition, stressful life events moderated the direct effect and mediating effect of the qi stagnation constitution on depression. These findings indicate that rumination and stressful life events may affect the relationship between the qi stagnation constitution and depression in women. PMID:28757889

The Role of Rumination and Stressful Life Events in the Relationship between the Qi Stagnation Constitution and Depression in Women: A Moderated Mediation Model

Directory of Open Access Journals (Sweden)

Mingfan Liu

2017-01-01

Full Text Available The qi stagnation constitution is associated with depression in traditional Chinese medicine. It is unclear how rumination and stressful life events affect the relationship between the qi stagnation constitution and depression. The Qi Stagnation Constitution Scale, Ruminative Response Scale, Center for Epidemiologic Studies Depression Scale, and Adolescent Self-Rating Life Events Checklist were used to assess this association in 1200 female college students. The results revealed that the qi stagnation constitution was positively associated with depression. Furthermore, rumination was a partial mediator of the relationship between the qi stagnation constitution and depression. In addition, stressful life events moderated the direct effect and mediating effect of the qi stagnation constitution on depression. These findings indicate that rumination and stressful life events may affect the relationship between the qi stagnation constitution and depression in women.

Changes of the corrosion potential of iron in stagnation and flow conditions and their relationship with metal release.

Science.gov (United States)

Fabbricino, Massimiliano; Korshin, Gregory V

2014-10-01

This study examined the behavior of corrosion potential (Ecorr) of iron exposed to drinking water during episodes of stagnation and flow. These measurements showed that during stagnation episodes, Ecorr values decrease prominently and consistently. This decrease is initially rapid but it becomes slower as the stagnation time increases. During flow episodes, the Ecorr values increase and reach a quasi-steady state. Experiments with varying concentrations of dissolved oxygen showed that the decrease of Ecorr values characteristic for stagnation is likely to be associated with the consumption of dissolved oxygen by the exposed metal. The corrosion potential of iron and its changes during stagnation were sensitive to the concentrations of sulfate and chloride ions. Measurements of iron release showed that both the absolute values of Ecorr measured prior to or after stagnation episodes were well correlated with the logarithms of concentrations of total iron. The slope of this dependence showed that the observed correlations between Ecorr values and Fe concentrations corresponded to the coupling between the oxidant consumption and changes of Fe redox status. These results demonstrate that in situ Ecorr measurements can be a sensitive method with which to ascertain effects of hydrodynamic conditions and short-term variations of water chemistry on metal release and corrosion in drinking water. This approach is valuable practically because Ecorr measurements are precise, can be carried out in situ with any desired time resolution, do not affect the state of exposed surface in any extent and can be carried out with readily available equipment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Numerical investigation on MHD micropolar fluid flow toward a stagnation point on a vertical surface with heat source and chemical reaction

Directory of Open Access Journals (Sweden)

S. Baag

2017-01-01

Full Text Available In this paper, the steady magnetohydrodynamic (MHD mixed convection stagnation point flow of an incompressible and electrically conducting micropolar fluid past a vertical flat plate is investigated. The effects of induced magnetic field, heat generation/absorption and chemical reaction have been taken into account during the present study. Numerical solutions are obtained by using the Runge–Kutta fourth order scheme with shooting technique. The skin friction and rate of heat and mass transfer at the bounding surface are also calculated. The generality of the present study is assured of by discussing the works of Ramachandran et al. (1988, Lok et al. (2005 and Ishak et al. (2008 as particular cases. It is interesting to note that the results of the previous authors are in good agreement with the results of the present study tabulated which is evident from the tabular values. Further, the novelty of the present analysis is to account for the effects of first order chemical reaction in a flow of reactive diffusing species in the presence of heat source/sink. The discussion of the present study takes care of both assisting and opposing flows. From the computational aspect, it is remarked that results of finite difference (Ishak et al. (2008 and Runge–Kutta associated with shooting technique (present method yield same numerical results with a certain degree of accuracy. It is important to note that the thermal buoyancy parameter in opposing flow acts as a controlling parameter to prevent back flow. Diffusion of lighter foreign species, suitable for initiating a destructive reaction, is a suggestive measure for reducing skin friction.

Current redistribution and generation of kinetic energy in the stagnated Z pinch.

Science.gov (United States)

Ivanov, V V; Anderson, A A; Papp, D; Astanovitskiy, A L; Talbot, B R; Chittenden, J P; Niasse, N

2013-07-01

The structure of magnetic fields was investigated in stagnated wire-array Z pinches using a Faraday rotation diagnostic at the wavelength of 266 nm. The distribution of current in the pinch and trailing material was reconstructed. A significant part of current can switch from the main pinch to the trailing plasma preheated by x-ray radiation of the pinch. Secondary implosions of trailing plasma generate kinetic energy and provide enhanced heating and radiation of plasma at stagnation. Hot spots in wire-array Z pinches also provide enhanced radiation of the Z pinch. A collapse of a single hot spot radiates 1%-3% of x-ray energy of the Z pinch with a total contribution of hot spots of 10%-30%.

Growth-based Theories for Declining Regions? A Note on Conceptualisations of Demographic Change for Regional Economic Development

Directory of Open Access Journals (Sweden)

Anke Matuschewski

2016-01-01

Full Text Available This article aims to critically assess the economic growth paradigm, which typically underlies most approaches to regional policymaking for demographic change. While population losses, ageing and outmigration – i.e. phenomena that are addressed as demographic change – have become a matter of urgency for many European regions, most regional economic development theories remain silent about the population decline affecting the economic growth and development prospects of regions. Consequently, regional policies usually rely on the concept of economic growth, yet neglect the complexity and importance of demographic change and how it relates to the economic sphere. Due to this lack in nuance, we argue that regional policymaking fails to design adequate policy support for regions facing persistent demographic change and economic stagnation or decline as a result. Based on these observations, the paper examines a selection of regional economic development theories in search for alternative concepts of growth and development in the context of demographic change. To this aim, globalisation peripheries are introduced as a fruitful conceptual point of reference and, in combination with endogenous regional development theories, discussed as an alternative approach for regional policymaking.

The Chinese medicine construct "stagnation" in mind-body connection mediates the effects of mindfulness training on depression and anxiety.

Science.gov (United States)

Lo, Herman H M; Ng, Siu Man; Chan, Cecilia L W; Lam, K F; Lau, Bobo H P

2013-08-01

Previous studies have identified different, but highly correlated variables explaining the effects of mindfulness training. Many of them are limited by tautological explanation. Under the framework of the mind-body connection, mindfulness training cultivates body awareness and promotes self-management of illness. Stagnation, a concept from Chinese medicine, may help explain the mechanism of change in mindfulness training. Individuals with depressive and anxiety symptoms (n=82) were randomized to either a Compassion-Mindfulness Therapy (C-MT) program or a waitlist control condition. The effect of stagnation as a mediator was investigated for dependent variables including depression, anxiety, and other physical and mental health variables. Depression, anxiety, stagnation, physical distress, daily functioning, positive affect, negative affect. Compared with the participants in the control group, those who completed C-MT demonstrated significant decreases in depression, F(1, 78)=15.67, p<.001, anxiety, F(1, 78)=7.72, p<.001, stagnation, F(1, 78)=4.96, p<.001, and other body-mind-spirit well-being measures. After entering the change in stagnation as the mediator, the effect of treatment reduced: depression (.35-.22), anxiety (.33-.05), and same patterns in other three secondary measures. The Sobel test was administered and significant reductions between group and depression (z=2.18, p=.029), anxiety (z=2.21, p=.027), and three secondary other measures (p<.05) were indicated. The study provides initial support for the role of stagnation in mediating changes in mindfulness training. It adds evidence to body-mind nondualism and offers new possibilities in studying treatment process and change mechanism. Copyright © 2013 Elsevier Ltd. All rights reserved.

Impacts of variable thermal conductivity on stagnation point boundary layer flow past a Riga plate with variable thickness using generalized Fourier's law

Science.gov (United States)

Shah, S.; Hussain, S.; Sagheer, M.

2018-06-01

This article explores the problem of two-dimensional, laminar, steady and boundary layer stagnation point slip flow over a Riga plate. The incompressible upper-convected Maxwell fluid has been considered as a rheological fluid model. The heat transfer characteristics are investigated with generalized Fourier's law. The fluid thermal conductivity is assumed to be temperature dependent in this study. A system of partial differential equations governing the flow of an upper-convected Maxwell fluid, heat and mass transfer using generalized Fourier's law is developed. The main objective of the article is to inspect the impacts of pertinent physical parameters such as the stretching ratio parameter (0 ⩽ A ⩽ 0.3) , Deborah number (0 ⩽ β ⩽ 0.6) , thermal relaxation parameter (0 ⩽ γ ⩽ 0.5) , wall thickness parameter (0.1 ⩽ α ⩽ 3.5) , slip parameter (0 ⩽ R ⩽ 1.5) , thermal conductivity parameter (0.1 ⩽ δ ⩽ 1.0) and modified Hartmann number (0 ⩽ Q ⩽ 3) on the velocity and temperature profiles. Suitable local similarity transformations have been used to get a system of non-linear ODEs from the governing PDEs. The numerical solutions for the dimensionless velocity and temperature distributions have been achieved by employing an effective numerical method called the shooting method. It is seen that the velocity profile shows the reduction in the velocity for the higher values of viscoelastic parameter and the thermal relaxation parameter. In addition, to enhance the reliability at the maximum level of the obtained numerical results by shooting method, a MATLAB built-in solver bvp4c has also been utilized.

Safe, Non-Corrosive Dielectric Fluid for Stagnating Radiator Thermal Control System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Paragon proposes to develop a single-loop, non-toxic, stagnating active pumped loop thermal control design for NASA's Orion or Lunar Surface Access Module (LSAM)...

Prediction and experimental validation of stagnation temperature attained by a solar cooker of hot box type

Energy Technology Data Exchange (ETDEWEB)

Narasimha Rao, A. V; Srikrishna, D. V. N [Warangal (India)

2000-07-01

A hot box type solar cooker, having double glass covers and a plane mirror reflector, is tested for stagnation temperature. A computer code is developed based on the analytical model proposed by Vaishya et. al. The global and beam components of solar radiation measured at Warangal are made use to predict the stagnation temperature of the cooker. The observed values of stagnation temperature at Warangal are compared with those of predicted values. A good agreement of the measured and observed values of the stagnation temperature is observed during the afternoon period. The lag in the observed values during the forenoon may be due to thermal inertia of the cooker. [Spanish] Se probo una estufa solar de tipo caja caliente con cubiertas dobles de vidrio y un espejo reflector plano para medir la temperatura de estancamiento. Se desarrollo un codigo de computacion basado en el modelo analitico propuesto por Vaishya et. al. Los componentes de la radiacion solar globales y de rayo medidos en Warangal se usan para predecir la temperatura de estancamiento de la estufa. Los valores observados de la temperatura de estancamiento en Warangal se comparan con los valores predichos. Se aprecia una buena concidencia de los valores medidos y observados de la temperatura de estancamiento durante el periodo de la tarde. El retraso de los valores observados durante la manana puede ser debido a la inercia termica de la estufa.

Using absolute x-ray spectral measurements to infer stagnation conditions in ICF implosions

Science.gov (United States)

Patel, Pravesh; Benedetti, L. R.; Cerjan, C.; Clark, D. S.; Hurricane, O. A.; Izumi, N.; Jarrott, L. C.; Khan, S.; Kritcher, A. L.; Ma, T.; Macphee, A. G.; Landen, O.; Spears, B. K.; Springer, P. T.

2016-10-01

Measurements of the continuum x-ray spectrum emitted from the hot-spot of an ICF implosion can be used to infer a number thermodynamic properties at stagnation including temperature, pressure, and hot-spot mix. In deuterium-tritium (DT) layered implosion experiments on the National Ignition Facility (NIF) we field a number of x-ray diagnostics that provide spatial, temporal, and spectrally-resolved measurements of the radiated x-ray emission. We report on analysis of these measurements using a 1-D hot-spot model to infer thermodynamic properties at stagnation. We compare these to similar properties that can be derived from DT fusion neutron measurements. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Growth or stagnation in pre-industrial Britain? A revealed income growth approach

DEFF Research Database (Denmark)

Groth, Christian; Persson, Karl Gunnar

2016-01-01

The extent of growth in pre-industrial Europe in general and in Britain in particular has attracted intense scholarly focus. Growth or Malthusian stagnation? No consensus has evolved. Reconstructions of national income from 1300 and up to the Industrial Revolution come to opposing conclusions...

What Explains the Stagnation of Female Labor Force Participation in Urban India?

NARCIS (Netherlands)

Klasen, S.; Pieters, J.

2015-01-01

Female labor force participation rates in urban India between 1987 and 2011 are surprisingly low and have stagnated since the late 1980s. Despite rising growth, fertility decline, and rising wage and education levels, married women's labor force participation hovered around 18 percent. Analysis of

Efficient solution to the stagnation problem of the particle swarm optimization algorithm for phase diversity.

Science.gov (United States)

Qi, Xin; Ju, Guohao; Xu, Shuyan

2018-04-10

The phase diversity (PD) technique needs optimization algorithms to minimize the error metric and find the global minimum. Particle swarm optimization (PSO) is very suitable for PD due to its simple structure, fast convergence, and global searching ability. However, the traditional PSO algorithm for PD still suffers from the stagnation problem (premature convergence), which can result in a wrong solution. In this paper, the stagnation problem of the traditional PSO algorithm for PD is illustrated first. Then, an explicit strategy is proposed to solve this problem, based on an in-depth understanding of the inherent optimization mechanism of the PSO algorithm. Specifically, a criterion is proposed to detect premature convergence; then a redistributing mechanism is proposed to prevent premature convergence. To improve the efficiency of this redistributing mechanism, randomized Halton sequences are further introduced to ensure the uniform distribution and randomness of the redistributed particles in the search space. Simulation results show that this strategy can effectively solve the stagnation problem of the PSO algorithm for PD, especially for large-scale and high-dimension wavefront sensing and noisy conditions. This work is further verified by an experiment. This work can improve the robustness and performance of PD wavefront sensing.

[Adsorption Capacity of the Air Particulate Matter in Urban Landscape Plants in Different Polluted Regions of Beijing].

Science.gov (United States)

Zhang, Wei-kang; Wang, Bing; Niu, Xiang

2015-07-01

Urban landscape plants, as one of the important factors of the urban ecosystem, play an important role in stagnating airborne particulates and purifying urban atmospheric environment. In this article, six kinds of common garden plants were studied, and aerosol generator (QRJZFSQ-I) was used to measure the ability of their leaves to stagnate atmospheric particulates (TSP and PM2.5) in different polluted regions. Meanwhile, environmental scanning electron microscope was used to observe changes in the leaf structure of the tested tree species. The results showed: (1)Among the tested tree species, the ability of coniferous species to stagnate atmospheric particulates was higher than that of broad-leaved species per unit leaf area. Pinus tabuliformis stagnated the highest volume of (3. 89± 0. 026) µg . m-2, followed by Pinus bungeana of (2. 82 ± 0. 392) µg . cm-2, and Populus tomentosa stagnated the minimum of (2. 00 ± 0. 118) µg . cm-2; (2) Through observing the leaf microstructure morphology, coniferous species were found to have tightly packed stomas, stoma density and surface roughness higher than those of broad-leaved species, and they could also secrete oil; (3) In different polluted regions, the leaves of the same tree species showed significant difference in stagnating TSP. Per unit leaf area, the tree species leaves situated around the 5th Ring Road had higher ability to absorb TSP than the tree species leaves at Botanical Garden, while their abilities to absorb PM2.5 showed no significant difference; (4) In different polluted regions, significantly adaptive changes were found in leaf structure. Comparing to the region with light pollution, the outer epidermal cells of the plant leaves in region with heavy pollution shrank, and the roughness of the leaf skin textures as well as the stomatal frequency and villous length increased. In spite of the significant changes in plant leaves exposed to the heavy pollution, these plants could still maintain normal

National Priorities List (NPL) Site Points, Region 9, 2015, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — NPL site point locations for the US EPA, Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

National Priorities List (NPL) Site Points, Region 9, 2017, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — NPL site point locations for the US EPA, Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

National Priorities List (NPL) Site Points, Region 9, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — NPL site point locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

A trust region interior point algorithm for optimal power flow problems

Energy Technology Data Exchange (ETDEWEB)

Wang Min [Hefei University of Technology (China). Dept. of Electrical Engineering and Automation; Liu Shengsong [Jiangsu Electric Power Dispatching and Telecommunication Company (China). Dept. of Automation

2005-05-01

This paper presents a new algorithm that uses the trust region interior point method to solve nonlinear optimal power flow (OPF) problems. The OPF problem is solved by a primal/dual interior point method with multiple centrality corrections as a sequence of linearized trust region sub-problems. It is the trust region that controls the linear step size and ensures the validity of the linear model. The convergence of the algorithm is improved through the modification of the trust region sub-problem. Numerical results of standard IEEE systems and two realistic networks ranging in size from 14 to 662 buses are presented. The computational results show that the proposed algorithm is very effective to optimal power flow applications, and favors the successive linear programming (SLP) method. Comparison with the predictor/corrector primal/dual interior point (PCPDIP) method is also made to demonstrate the superiority of the multiple centrality corrections technique. (author)

Effects of Gyejibongnyeong-hwan on dysmenorrhea caused by blood stagnation: study protocol for a randomized controlled trial

Directory of Open Access Journals (Sweden)

Park Jeong-Su

2012-01-01

Full Text Available Abstract Background Gyejibongnyeong-hwan (GJBNH is one of the most popular Korean medicine formulas for menstrual pain of dysmenorrhea. The concept of blood stagnation in Korean medicine is considered the main factor of causing abdominal pain, or cramps, during menstrual periods. To treat the symptoms, GJBNH is used to fluidify the stagnated blood and induce the blood flow to be smooth, reducing pain as the result. The purpose of this trial is to identify the efficacy of GJBNH in dysmenorrhea caused by blood stagnation. Methods This study is a multi-centre, randomised, double-blind, controlled trial with two parallel arms: the group taking GJBNH and the group taking placebo. 100 patients (women from age 18 to 35 will be enrolled to the trial. Through randomization 50 patients will be in experiment arm, and the other 50 patients will be in control arm. At the second visit (baseline, all participants who were already screened that they fulfil both the inclusion and the exclusion criteria will be randomised into two groups. Each group will take the intervention three times per day during two menstrual cycles. After the treatment for two cycles, each patient will be followed up during their 3rd, 4th and 5th menstrual cycles. From the screening (Visit 1 through the second follow-up (Visit 6 the entire process will take 25 weeks. Discussion This trial will provide evidence for the effectiveness of GJBNH in treating periodical pain due to dysmenorrhea that is caused by blood stagnation. The primary outcome between the two groups will be measured by changes in the Visual Analogue Score (VAS of pain. The secondary outcome will be measured by the Blood Stagnation Scale, the Short-form McGill questionnaire and the COX menstrual symptom scale. Analysis of covariance (ANCOVA and repeated measured ANOVA will be used to analyze the data analysis. Trial registration Current Controlled Trials: ISRCTN30426947

Constraining the timescale of magma stagnation beneath Mauna Kea volcano, Hawaii,using diffusion profiles in olivine phenocrysts

Science.gov (United States)

Bloch, E. M.; Ganguly, J.

2009-12-01

Fe-Mg diffusion profiles have been measured in olivine xenocrysts within alkalic basalts in order to constrain the timescales of magma stagnation beneath Mauna Kea volcano, Hawaii. It has been suggested that during the main tholeiitic shield-building stage, and postshield eruptive stages of Mauna Kea, magmas were stalled and stagnated near the Moho, at a depth of ~15 km. Evidence in support of this hypothesis comes from cumulates formed by gravity-settling and in situ crystallization within magma chambers (Fodor and Galar, 1997), and from clinopyroxene-wholerock thermobarometry on Hamakua basalts (Putirka, in press). The cumulates represent a ‘fossil’ magma chamber which formed primarily from tholeiitic basalts; during the later capping-lava stage of Mauna Kea, alkalic basalts tore off chunks of these cumulates during ascent to the surface. We have measured several diffusion profiles in olivine xenocrysts from a single basalt sample. Because these xenocrysts have homogenous core compositions identical to a neighboring dunite cumulate, and because they are much larger and texturally distinct from compositionally dissimilar olivine phenocrysts, they are interpreted to be cumulate olivines which were dislodged during magma recharge/mixing in the stagnation zone. Although the orientations of the phenocrysts are not yet known, the diffusion profiles have been fit using diffusion coefficients parallel to the c and a crystallographic axes (i.e. minimum and maximum values). Modeling diffusion profiles yields ∫Ddt ≤4.5 x 10-5 cm2. Assuming that the xenocrysts were broken off from the cumulate immediately when the magma chamber was recharged, it is possible to calculate the maximum stagnation time of the basalts. Thus, the retrieved ∫Ddt value yields a maximum stagnation time of ~0.7 years. References: Fodor RV, Galar, PA (1997). A View into the Subsurface of Mauna Kea Volcano, Hawaii: Crystallization Processes Interpreted through the Petrology and Petrography of

Possible Origin of Stagnation and Variability of Earth's Biodiversity

Science.gov (United States)

Stollmeier, Frank; Geisel, Theo; Nagler, Jan

2014-06-01

The magnitude and variability of Earth's biodiversity have puzzled scientists ever since paleontologic fossil databases became available. We identify and study a model of interdependent species where both endogenous and exogenous impacts determine the nonstationary extinction dynamics. The framework provides an explanation for the qualitative difference of marine and continental biodiversity growth. In particular, the stagnation of marine biodiversity may result from a global transition from an imbalanced to a balanced state of the species dependency network. The predictions of our framework are in agreement with paleontologic databases.

[Expressions of neurotransmitters in patients of insomnia differentiated as liver stagnation transforming into fire treated with acupuncture].

Science.gov (United States)

Ji, Xiangdong; Wang, Qunsong; Zhu, Wenxian

2015-06-01

To compare the difference in the efficacy between acupuncture and oral administration of trazodone and the expressions of neurotransmitters in patients of insomnia differentiated as liver stagnation transforming into fire. Seventy patients of insomnia differentiated as liver stagnation transforming into fire were randomized into an observation group and a control group, 35 cases in each one. In the observation group, acupuncture therapy was adopted at Shenmen (HT 7), Baihui (GV 20), Yintang (GV 29), Hegu (LI 4), Taichong (LR 3), etc. The needles were retained for 20 min each time. The treatment was given once a day, the treatment of 2 weeks made one session. In the control group, trazodone, 100 mg, oral administration, once a day, the treatment of 2 weeks made one session. Two sessions were required in the two groups. The scores in Pittsburgh sleep quality index (PSQI) and Asberg rating scale for side effects (SERS), the levels of neurotransmitters such as 5-hydroxy tryptamine (5-HT) and norepinephrine (NE) and the expressions of protein kinase C (PKC) and brain-derived neurotrophic factor (BDNF) in peripheral blood were observed before and after treatment in the two groups. PSQI score and SERS score after treatment were all decreased compared with those in both groups before treatment (both Pinsomnia differentiated as liver stagnation transforming into fire, and reduces serum NE level and increases 5-HT content and BDNF expression, which achieves the better efficacy as compared with the oral administration of trazodone. It is one of the effective approaches to the treatment of insomnia differentiated as liver stagnation transforming into fire.

Study of atmospheric stagnation, recirculation, and ventilation potential at Narora Atomic Power Station site

International Nuclear Information System (INIS)

Kumar, Deepak; Kumar, Avinash; Kumar, Vimal; Rao, K.S.; Kumar, Jaivender; Ravi, P.M.

2011-01-01

Atmosphere is an important pathway to be considered in assessment of the environmental impact of radioactivity releases from nuclear facilities. Estimation of concentration of released effluents in air and possible ground contamination needs an understanding of relevant atmospheric dispersion. This article describes the meteorological characteristics of Narora Atomic Power Station (NAPS) site by using the integral parameters developed by Allwine and Whiteman. Meteorological data measured during the period 2006-2010 were analyzed. The integral quantities related to the occurrence of stagnation, recirculation, and ventilation characteristics were studied for NAPS site to assess the dilution potential of the atmosphere. Wind run and recirculation factors were calculated for a 24-h transport time using 5 years of hourly surface measurements of wind speed and direction. The occurrence of stagnation, recirculation, and ventilation characteristics during 2006-2010 at NAPS site is observed to be 33.8% of the time, 19.5% of the time, and 34.7% of the time, respectively. The presence of strong winds with predominant wind direction NW and WNW during winter and summer seasons leads to higher ventilation (48.1% and 44.3%) and recirculation (32.6% of the summer season). The presence of light winds and more dispersed winds during prewinter season with predominant wind directions W and WNW results in more stagnation (59.7% of the prewinter season). Thus, this study will serve as an essential meteorological tool to understand the transport mechanism of atmospheric radioactive effluent releases from any nuclear industry. (author)

Void fraction distribution in a heated rod bundle under flow stagnation conditions

Energy Technology Data Exchange (ETDEWEB)

Herrero, V.A.; Guido-Lavalle, G.; Clausse, A. [Centro Atomico Bariloche and Instituto Balseiro, Bariloche (Argentina)

1995-09-01

An experimental study was performed to determine the axial void fraction distribution along a heated rod bundle under flow stagnation conditions. The development of the flow pattern was investigated for different heat flow rates. It was found that in general the void fraction is overestimated by the Zuber & Findlay model while the Chexal-Lellouche correlation produces a better prediction.

Leaking Underground Storage Tank Points, Region 9 Indian Country, 2017, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features that represent Leaking Underground Storage Tanks in US EPA Region 9 Indian Country. This dataset contains facility name and...

Stagnation, circulation, and erosion of granular materials through belt conveyor sluice gate

Science.gov (United States)

Pohlman, Nicholas; Moralda, Michael; Dunne, Ryan

2013-11-01

Control of flow rates in conversion reactors for discrete materials like biomass can be achieved in belt conveyors through a combination of belt speed, hopper size, and aperture opening. As material is extracted from the bottom of the storage hopper, other material cannot achieve plug flow and therefore is restricted from exiting through a sluice-gate type opening. The excess material moves vertically from the opening causing a pile up and recirculation back along the free surface of the hopper. Experimental results obtained through high speed imaging show the position of the stagnation point as well as the rate of circulation is dependent on the mass flow rate achieved and instantaneous fill level. The movement of material into the plug flow along the belt allows verification of deposition models on erodible beds rather than rigid surfaces with artificial roughness of glued particles. Similarly, the pile-up at the exit influences the efficiency of the transport affecting the narrow energy return on investment of biomass resources. The laboratory-scale behavior can therefore be translated into industrial performance metrics for increased operational efficiency. This work is supported by the NSF REU Site Operation E-Tank under award number 1156789.

Proton imaging of hohlraum plasma stagnation in inertial-confinement-fusion experiments

International Nuclear Information System (INIS)

Li, C.K.; Séguin, F.H.; Frenje, J.A.; Sinenian, N.; Rosenberg, M.J.; Manuel, M.J.-E; Rinderknecht, H.G.; Zylstra, A.B.; Petrasso, R.D.; Amendt, P.A.; Landen, O.L.; Mackinnon, A.J.; Town, R.P.J.; Wilks, S.C.; Betti, R.; Meyerhofer, D.D.; Soures, J.M.; Hund, J.; Kilkenny, J.D.; Nikroo, A.

2013-01-01

Proton radiography of the spatial structure and temporal evolution of plasma blowing off from a hohlraum wall reveals how the fill gas compresses the wall blow-off, inhibits plasma jet formation and impedes plasma stagnation in the hohlraum interior. The roles of spontaneously generated electric and magnetic fields in hohlraum dynamics and capsule implosions are demonstrated. The heat flux is shown to rapidly convect the magnetic field due to the Nernst effect, which is shown to be ∼10 times faster than convection by the plasma fluid from expanded wall blow-off (v N ∼ 10v). This leads to inhibition of heat transfer from the gas region in the laser beam paths to the surrounding cold gas, resulting in a local plasma temperature increase. The experiments show that interpenetration of the two materials (gas and wall) occurs due to the classical Rayleigh–Taylor instability as the lighter, decelerating ionized fill gas pushes against the heavier, expanding gold wall blow-off. This experiment provides physics insight into the effects of fill gas on x-ray-driven implosions, and would impact the ongoing ignition experiments at the National Ignition Facility. (paper)

Effects of platinum stagnation surface on the lean extinction limits of premixed methane/air flames at moderate surface temperatures

Energy Technology Data Exchange (ETDEWEB)

Wiswall, J.T.; Li, J.; Wooldridge, M.S.; Im, H.G. [Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI (United States)

2011-01-15

A stagnation flow reactor was used to study the effects of platinum on the lean flammability limits of atmospheric pressure premixed methane/air flames at moderate stagnation surface temperatures. Experimental and computational methods were used to quantify the equivalence ratio at the lean extinction limit ({phi}{sub ext}) and the corresponding stagnation surface temperature (T{sub s}). A range of flow rates (57-90 cm/s) and corresponding strain rates were considered. The results indicate that the gas-phase methane/air flames are sufficiently strong relative to the heterogeneous chemistry for T{sub s} conditions less than 750 K that the platinum does not affect {phi}{sub ext}. The computational results are in good agreement with the experimentally observed trends and further indicate that higher reactant flow rates (>139 cm/s) and levels of dilution (>{proportional_to}10% N{sub 2}) are required to weaken the gas-phase flame sufficiently for surface reaction to play a positive role on extending the lean flammability limits. (author)

The role of regional information in estimation of extreme point rainfalls

DEFF Research Database (Denmark)

Rosbjerg, Dan; Madsen, Henrik

1996-01-01

Previous analysis has shown that inclusion of regional information improves at-site estimation of point rainfalls and makes it possible to obtain estimates at non-monitored sites. The basis for this analysis was a partial duration series (PDS) modelling of individual rainfall observations and use...... point rainfall data into one sample from a common parent distribution and modelling with disregard of either the dependence between stations or the regional heterogeneity. The different models are analysed and compared with respect to the uncertainty of the predicted extreme events....

Orality disorders in melancholia: acedia as stagnation

Directory of Open Access Journals (Sweden)

Ana Cecília Magtaz

2012-09-01

Full Text Available In this article valuable contributions by Lasègue, Freud and Abraham are discussed, as they are all indispensible to the understanding of orality disorders in melancholia. Although none of the above authors used the exact term "orality disorders," their understandings of both hysteria and melancholia are important in the debate surrounding the clinical treatment of these difficulties. Sadness is a common denominator for the authors, but contributions on acedia, the "noonday demon" mentioned by Agamben, are also important. Acedia is defined as stagnation, a desperate lack of vigor when faced with a wearying and demanding situation. Those who suffer from chronic acedia feel great inertia and are unable to envision a future. They see their creativity wane away, especially due to the painful isolation caused by what might be called anguished sadness - a denial of sadness through manic action.

Pressure and temperature development in solar heating system during stagnation

DEFF Research Database (Denmark)

Dragsted, Janne; Furbo, Simon; Chen, Ziqian

2010-01-01

of the pipes of the solar collector loop. During the investigation the pre-pressure of the expansion vessel and system filling pressure was changed. The investigations showed that a large pressurised expansion vessel will protect the collector loop from critically high temperatures as long as the solar......This paper presents an investigation of stagnation in solar collectors and the effects it will have on the collector loop. At a laboratory test stand at the Technical University of Denmark, a pressurized solar collector loop was designed to test different numbers of collectors and different designs...

Dynamic and Stagnating Plasma Flow Leading to Magnetic-Flux-Tube Collimation

International Nuclear Information System (INIS)

You, S.; Yun, G.S.; Bellan, P.M.

2005-01-01

Highly collimated, plasma-filled magnetic-flux tubes are frequently observed on galactic, stellar, and laboratory scales. We propose that a single, universal magnetohydrodynamic pumping process explains why such collimated, plasma-filled magnetic-flux tubes are ubiquitous. Experimental evidence from carefully diagnosed laboratory simulations of astrophysical jets confirms this assertion and is reported here. The magnetohydrodynamic process pumps plasma into a magnetic-flux tube and the stagnation of the resulting flow causes this flux tube to become collimated

Impeding hohlraum plasma stagnation in inertial-confinement fusion.

Science.gov (United States)

Li, C K; Séguin, F H; Frenje, J A; Rosenberg, M J; Rinderknecht, H G; Zylstra, A B; Petrasso, R D; Amendt, P A; Landen, O L; Mackinnon, A J; Town, R P J; Wilks, S C; Betti, R; Meyerhofer, D D; Soures, J M; Hund, J; Kilkenny, J D; Nikroo, A

2012-01-13

This Letter reports the first time-gated proton radiography of the spatial structure and temporal evolution of how the fill gas compresses the wall blowoff, inhibits plasma jet formation, and impedes plasma stagnation in the hohlraum interior. The potential roles of spontaneously generated electric and magnetic fields in the hohlraum dynamics and capsule implosion are discussed. It is shown that interpenetration of the two materials could result from the classical Rayleigh-Taylor instability occurring as the lighter, decelerating ionized fill gas pushes against the heavier, expanding gold wall blowoff. This experiment showed new observations of the effects of the fill gas on x-ray driven implosions, and an improved understanding of these results could impact the ongoing ignition experiments at the National Ignition Facility.

Indian Country Leaking Underground Storage Tank (LUST) Points, Region 9, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features that represent Leaking Underground Storage Tanks in US EPA Region 9 Indian Country. This dataset contains facility name and...

The stagnation of the Mexican male life expectancy in the first decade of the 21st century

DEFF Research Database (Denmark)

Canudas-Romo, Vladimir; García-Guerrero, Víctor Manuel; Echarri-Cánovas, Carlos Javier

2015-01-01

OBJECTIVES: In the first decade of the 21st century, the Mexican life expectancy changed from a long trend of increase to stagnation. These changes concur with an increase in deaths by homicides that the country experienced in that decade, and an obesity epidemic that had developed over the last...... of life expectancy from 2000 to 2010. RESULTS: The apparent stagnation in life expectancy is the result of an increase in deaths by homicides and diabetes mellitus on the one hand, and the positive improvements observed in other causes of death on the other. The negative impact of homicides...... by 2 years if deaths by homicides and diabetes mellitus had been avoided....

Self-Generated Magnetic Fields in the Stagnation Phase of Indirect-Drive Implosions on the National Ignition Facility

Science.gov (United States)

Walsh, C. A.; Chittenden, J. P.; McGlinchey, K.; Niasse, N. P. L.; Appelbe, B. D.

2017-04-01

Three-dimensional extended-magnetohydrodynamic simulations of the stagnation phase of inertial confinement fusion implosion experiments at the National Ignition Facility are presented, showing self-generated magnetic fields over 104 T . Angular high mode-number perturbations develop large magnetic fields, but are localized to the cold, dense hot-spot surface, which is hard to magnetize. When low-mode perturbations are also present, the magnetic fields are injected into the hot core, reaching significant magnetizations, with peak local thermal conductivity reductions greater than 90%. However, Righi-Leduc heat transport effectively cools the hot spot and lowers the neutron spectra-inferred ion temperatures compared to the unmagnetized case. The Nernst effect qualitatively changes the results by demagnetizing the hot-spot core, while increasing magnetizations at the edge and near regions of large heat loss.

A comparison of antibiotic point prevalence survey data from four Irish regional/general hospitals.

LENUS (Irish Health Repository)

Naughton, C

2011-06-01

Point prevalence surveys (PPS) are increasingly used to examining and compare hospital antibiotic consumption. The aim of this study was to identify the (1) point prevalence of antibiotic use in one regional hospital and (2) compare PPS data from similar regional\\/general hospitals.

Stagnating energy efficiency in the Swedish building sector-Economic and organisational explanations

International Nuclear Information System (INIS)

Naessen, Jonas; Sprei, Frances; Holmberg, John

2008-01-01

The development towards higher energy efficiency in the Swedish building sector stagnated in the late 1980s and 1990s. In new buildings the average specific energy use for heating is twice as high as in the best performing buildings 20 years ago. By combining econometric studies and interviews with actors in the building sector we analyse the underlying economic and organisational causes for this development. In the stock of buildings, specific energy use for heating (kWh/m 2 /yr) has a high correlation with increasing energy prices and price elasticities have not changed markedly over time. This implies that the stagnation to a large extent can be explained by energy price trends. On the contrary, in new buildings the correlation between energy prices and specific energy use is much weaker. One important cause of low sensitivity to price changes is that information about the life cycle cost (LCC) of different investment alternatives is often not available to the involved actors. The most common investment criterion is instead the requirements of the national building energy standard which has developed into a norm rather than a minimum for energy performance. In this paper we also discuss potential improvements in the learning processes within the sector

International health policy and stagnating maternal mortality: is there a causal link?

Science.gov (United States)

Unger, Jean-Pierre; Van Dessel, Patrick; Sen, Kasturi; De Paepe, Pierre

2009-05-01

This paper examines why progress towards Millennium Development Goal 5 on maternal health appears to have stagnated in much of the global south. We contend that besides the widely recognised existence of weak health systems, including weak services, low staffing levels, managerial weaknesses, and lack of infrastructure and information, this stagnation relates to the inability of most countries to meet two essential conditions: to develop access to publicly funded, comprehensive health care, and to provide the not-for-profit sector with needed political, technical and financial support. This paper offers a critical perspective on the past 15 years of international health policies as a possible cofactor of high maternal mortality, because of their emphasis on disease control in public health services at the expense of access to comprehensive health care, and failures of contracting out and public-private partnerships in health care. Health care delivery cannot be an issue both of trade and of right. Without policies to make health systems in the global south more publicly-oriented and accountable, the current standards of maternal and child health care are likely to remain poor, and maternal deaths will continue to affect women and their families at an intolerably high level.

Unsteady MHD stagnation flow over a moving wall

International Nuclear Information System (INIS)

Kumari, M.; Nath, G.

2006-01-01

The unsteady viscous stagnation flow of an electrically conducting fluid over a continuously moving wall with an applied magnetic field has been investigated when the free stream and wall velocities increase arbitrarily with time. The flow is initially (t = 0) steady and at time t > 0, it becomes unsteady. The semi-similar solution of the unsteady Navier-Stokes equations along with the energy equation governing the flow and heat transfer has been obtained numerically. Also the self-similar solution is obtained when the surface and free stream velocities vary inversely as a linear function of time. The shear stress and the heat transfer increase with time and magnetic field. The surface shear stress vanishes for certain value of the ratio of the wall velocity to the free stream velocity. (author)

Avoiding Intellectual Stagnation: The Starship as an Expander of Minds

Science.gov (United States)

Crawford, Ian A.

2014-06-01

Interstellar exploration will advance human knowledge and culture in multiple ways. Scientifically, it will advance our understanding of the interstellar medium, stellar astrophysics, planetary science and astrobiology. In addition, significant societal and cultural benefits will result from a programme of interstellar exploration and colonisation. Most important will be the cultural stimuli resulting from expanding the horizons of human experience, and increased opportunities for the spread and diversification of life and culture through the Galaxy. Ultimately, a programme of interstellar exploration may be the only way for human (and post-human) societies to avoid the intellectual stagnation predicted for the `end of history'.

An ArcGIS approach to include tectonic structures in point data regionalization.

Science.gov (United States)

Darsow, Andreas; Schafmeister, Maria-Theresia; Hofmann, Thilo

2009-01-01

Point data derived from drilling logs must often be regionalized. However, aquifers may show discontinuous surface structures, such as the offset of an aquitard caused by tectonic faults. One main challenge has been to incorporate these structures into the regionalization process of point data. We combined ordinary kriging and inverse distance weighted (IDW) interpolation to account for neotectonic structures in the regionalization process. The study area chosen to test this approach is the largest porous aquifer in Austria. It consists of three basins formed by neotectonic events and delimited by steep faults with a vertical offset of the aquitard up to 70 m within very short distances. First, ordinary kriging was used to incorporate the characteristic spatial variability of the aquitard location by means of a variogram. The tectonic faults could be included into the regionalization process by using breaklines with buffer zones. All data points inside the buffer were deleted. Last, IDW was performed, resulting in an aquitard map representing the discontinuous surface structures. This approach enables one to account for such surfaces using the standard software package ArcGIS; therefore, it could be adopted in many practical applications.

Stagnation of the exploitation of Al ores and the depression of world prices of Al

Directory of Open Access Journals (Sweden)

Slavkovský Jozef

1999-03-01

Full Text Available In the contribution, data on Al – a metal of the 20th century are compiled together with the problems of genesis of the Al mineral raw ma-terials as well as types of bauxite and Al-laterite deposits. Furthermore, an overview of the world exploitation of bauxite during 1935-1980 is given along with the prognoses to 2000 and present situation (1992-1996. Overviews of the production of Al follows, providing its rela-tion to the bauxite exploitation. Contrary to the prognoses, a stabilization or stagnation has been observed in the exploitation of bauxite and production of Al during nineties, which a tendency is directly reflected in the world price of this commodity. When analyzing the Al prices for a longer period, some serious deviations can be noticed, that however presently represent a long-term minimum. We hope the stagnation of the production and the price decline are only temporary and new possibilities of the utilization of Al will be found soon.

Sealable stagnation flow geometries for the uniform deposition of materials and heat

Science.gov (United States)

McCarty, Kevin F.; Kee, Robert J.; Lutz, Andrew E.; Meeks, Ellen

2001-01-01

The present invention employs a constrained stagnation flow geometry apparatus to achieve the uniform deposition of materials or heat. The present invention maximizes uniform fluxes of reactant gases to flat surfaces while minimizing the use of reagents and finite dimension edge effects. This results, among other things, in large area continuous films that are uniform in thickness, composition and structure which is important in chemical vapor deposition processes such as would be used for the fabrication of semiconductors.

Surface kinetics for catalytic combustion of hydrogen-air mixtures on platinum at atmospheric pressure in stagnation flows

Science.gov (United States)

Ikeda, H.; Sato, J.; Williams, F. A.

1995-03-01

Experimental studies of the combustion of premixed hydrogen-air mixtures impinging on the surface of a heated platinum plate at normal atmospheric pressure were performed and employed to draw inferences concerning surface reaction mechanisms and rate parameters applicable under practical conditions of catalytic combustion. Plate and gas temperatures were measured by thermocouples, and concentration profiles of major stable species in the gas were measured by gas-chromatographic analyses of samples withdrawn by quartz probes. In addition, ignition and extinction phenomena were recorded and interpreted with the aid of a heat balance at the surface and a previous flow-field analysis of the stagnation-point boundary layer. From the experimental and theoretical results, conclusions were drawn concerning the surface chemical-kinetic mechanisms and values of the elementary rate parameters that are consistent with the observations. In particular, the activation energy for the surface oxidation step H + OH → H 2O is found to be appreciably less at these high surface coverages than in the low-coverage limit.

Large scale flow in the dayside magnetosheath

International Nuclear Information System (INIS)

Crooker, N.U.; Siscoe, G.L.; Eastman, T.E.; Frank, L.A.; Zwickl, R.D.

1984-01-01

The degree of control over plasma flow direction exerted by the compressed magnetic field in the dayside magnetosheath is examined by comparing ISEE 1 LEPEDEA data with hydrodynamic and magnetohydrodynamic predictions. Measured flow directions projected toward the subsolar region pass within approx.1 R/sub E/ of the aberrated theoretical hydrodynamic stagnation point in 11 of 20 cases analyzed. The remaining nine cases pass within approx.2-3 R/sub E/ of the stagnation point. One case with large deflection has been studied in detail with large-time-resolution plasma and magnetic field data both from ISEE 1 and from ISEE 3, in the role of a solar wind monitor. The deflected flow is persitent over a period of 1 1/2 hours, and its direction is consistent with a stagnation point displacement resulting from increased, asymmetric magnetic field pressure contributions during periods of low Alfven Mach number, as predicted by Russell et al. Of the other eight cases with large deflections, four are associated with flux transfer events identified independently by Berchem and Russell. The observed deflections in these cases are consistent with either the subsolar merging line or the antiparallel merging hypothesis, but not exclusively with one or the other. The results relating to the formation of a stagnation line rather than a stagnation point are inconclusive

Stagnations of increasing trends in negative pressure with repeated cavitation in water/metal Berthelot tubes as a result of mechanical sealing

International Nuclear Information System (INIS)

Hiro, Kazuki; Ohde, Yoshihito; Tanzawa, Yasutoshi

2003-01-01

To investigate effects of mechanical sealing on negative pressures in water/metal tube Berthelot systems, trends in negative pressure are observed through runs of temperature cycles below 90 deg. C in two systems made of metals having small amounts of gas inclusions. The first system is a pre-degassed all-stainless-steel tube/plug system. The steel is a special product for vacuum engineering. The second is the same tube sealed with plugs made of silver solidified one-dimensionally in a vacuum furnace. A new type of trend, stagnation for intermediate cycles is found in both systems so long as sealing distortion of each plug is small in amount. The stagnation period for the first system is longer than that for the second one. A metallurgical mechanism of a gas-being-replenished crevice model is proposed: distorted parts of metals undergo heat-treatment during runs of temperature cycles, and the heat-treatment enhances the rates of impurity gas transports to crevices on the metal surface where cavitation occurs, and the transport causes the stagnation for cycles during which the rates are still high

Expansionary economic effects of energy conversion under stagnation

International Nuclear Information System (INIS)

Ono, Yoshiyasu

2013-01-01

After the Fukushima disaster, energy conversion such as nuclear power phaseout and deployment of renewable energy or survival of nuclear power had been actively argued pro and con. Both sides admitted extra costs were needed but their economic effects would be contrary dependent on business state. Under better economy, extra costs would be actual burden of total economy. Under stagnation as was long in Japan at present, extra costs brought about expansion of employment and economy with simulated consumption increase. Industry conversion would occur such industry intensively using power would depreciate and energy conserved industry would grow. Difference of power use intensity between industries made difficult in energy conversion because present Japanese industry constitution was mostly formed based on cheap power cost for industry use. Even taking account of international competition, the same would be true by adjusting finance balance sheet and currency exchange rate. (T. Tanaka)

Effects of insulin on physical factors: atherosclerosis in diabetes mellitus.

Science.gov (United States)

McMillan, D E

1985-12-01

Newton's laws of motion play a major role in blood flow. Inertia and conservation of momentum cause flow to separate at branches and curves in large blood vessels. Areas of separated flow in the arterial system are sites of atherogenesis. The place at which the separation ends, called the stagnation point, is the focus for plaque development. Pulsation of the arterial circulation causes the stagnation point to move downstream with each systole and upstream with each diastole. This movement generates forward and backward shearing force in the stagnation region as the separated flow migrates back and forth. Angular momentum, introduced into flowing blood with each heart beat and further enhanced by the asymmetry of origin of vessels branching from the aorta, generates a sidewise force component that is preserved during migration of the stagnation point. The sidewise force, added to the forward and backward shear stresses, creates an area of multidirectional shear stress under the migrating stagnation point that increases the permeability of the local endothelium. Blood is a complex fluid; it can generate greater shear stresses near the stagnation point than the simple fluids normally studied by fluid mechanicists. Blood is capable of retaining shear stress for short periods after it ceases to flow and extra work is required to establish its flow. In diabetes, reduced erythrocyte deformability further burdens flow onset. We are not yet able to establish whether the increase is only a few percent, or whether the burden is larger. Whatever its magnitude, diabetic modifications of the flow properties of blood, directly affect the size, location, and rate of development of atherosclerotic plaques.

TouchGrid: Touchpad pointing by recursively mapping taps to smaller display regions

DEFF Research Database (Denmark)

Hertzum, Morten; Hornbæk, Kasper

2005-01-01

Touchpad devices are widely used but lacking in pointing efficiency. The TouchGrid, an instance of what we term cell cursors, replaces moving the cursor through dragging the finger on a touchpad with tapping in different regions of the touchpad. The touchpad regions are recursively mapped...... to smaller display regions and thereby enable high-precision pointing without requiring high tapping precision. In an experiment, six subjects used the TouchGrid and a standard touchpad across different numbers of targets, distances to targets, and target widths. Whereas standard touchpad operation follows...... Fitts’ law, target selection time with the TouchGrid is a linear function of the required number of taps. The TouchGrid was significantly faster for small targets and for tasks requiring one tap, and marginally faster for two-tap tasks. Error rates tended to be higher with the TouchGrid than...

Feasibility of recycling lead batteries in GCC region

Energy Technology Data Exchange (ETDEWEB)

Kassem, M.E.

1992-09-01

The dwindling resources of primary lead and growing environmental awareness figure out the recycling of lead as a necessity all over the world. Estimated demands of the Gulf Cooperative Countries Region reveals a lead supply deficiency around 40.000 tonnes per year. Globally, with a stagnation of primary lead production, the spent lead batteries within GCC region provide an excellent potential for a secondary lead industry. This paper deals with the feasibility of recycling lead batteries and highlights its benefits to the region. (orig.).

One- and two-dimensional density and temperature measurements of an argon-neon Z-pinch plasma at stagnation

International Nuclear Information System (INIS)

Wong, K.L.; Springer, P.T.; Hammer, J.H.; Iglesias, C.A.; Osterheld, A.L.; Foord, M.E.; Bruns, H.C.; Emig, J.A.; Deeney, C.

1996-10-01

In order to benchmark and improve current 2D radiation magnetohydrodynamic (MHD) models of Z-pinch plasmas, we have performed experiments which characterize the plasma -conditions at stagnation. In the experiments the SATURN pulsed power facility at Sandia National Laboratory was used to create an imploding -Ar-Ne plasma. An absolutely calibrated, high resolution space- and time- resolving Johann crystal spectrometer was used to infer the electron temperature Te from the slope of the hydrogenlike Ne free-bound continuum, and the ion density ni from the Stark broadening of the Ar heliunlike Rydberg series. 2D electron temperature profiles of the plasma are obtained from a set of imaging crystals also focused on the Ne free-bound continuum. We shot two types of gas nozzles in the experiment, annular and uniform fill which varies the amount of mass in the plasma. 2D local thermodynamic equilibrium (LTE) and non-LTE MM models predict a radiating region denser and cooler than measured

Rise, stagnation, and rise of Danish women's life expectancy

DEFF Research Database (Denmark)

Lindahl-Jacobsen, Rune; Rau, Roland; Jeune, Bernard

2016-01-01

Health conditions change from year to year, with a general tendency in many countries for improvement. These conditions also change from one birth cohort to another: some generations suffer more adverse events in childhood, smoke more heavily, eat poorer diets, etc., than generations born earlier...... favor forecasts that hinge on cohort differences. We use a combination of age decomposition and exchange of survival probabilities between countries to study the remarkable recent history of female life expectancy in Denmark, a saga of rising, stagnating, and now again rising lifespans. The gap between...... female life expectancy in Denmark vs. Sweden grew to 3.5 y in the period 1975-2000. When we assumed that Danish women born 1915-1945 had the same survival probabilities as Swedish women, the gap remained small and roughly constant. Hence, the lower Danish life expectancy is caused by these cohorts...

The Growth Points of Regional Economy and Regression Estimation for Branch Investment Multipliers

Directory of Open Access Journals (Sweden)

Nina Pavlovna Goridko

2018-03-01

Full Text Available The article develops the methodology of using investment multipliers to identify growth points for a regional economy. The paper discusses various options for the assessment of multiplicative effects caused by investments in certain sectors of the economy. All calculations are carried out on the example of economy of the Republic of Tatarstan for the period 2005–2015. The instrument of regression modeling using the method of least squares, permits to estimate sectoral and cross-sectoral investment multipliers in the economy of the Republic of Tatarstan. Moreover, this method allows to assess the elasticity of gross output of regional economy and its individual sectors depending on investment in various sectors of the economy. Calculations results allowed to identify three growth points of the economy of the Republic of Tatarstan. They are mining industry, manufacturing industry and construction. The success of a particular industry or sub-industry in a country or a region should be measured not only by its share in macro-system’s gross output or value added, but also by the multiplicative effect that investments in the industry have on the development of other industries, on employment and on general national or regional product. In recent years, the growth of the Russian was close to zero. Thus, it is crucial to understand the structural consequences of the increasing investments in various sectors of the Russian economy. In this regard, the problems solved in the article are relevant for a number of countries and regions with a similar economic situation. The obtained results can be applied for similar estimations of investment multipliers as well as multipliers of government spending, and other components of aggregate demand in various countries and regions to identify growth points. Investments in these growth points will induce the greatest and the most evident increment of the outcome from the macro-system’s economic activities.

Economics of thinning stagnated ponderosa pine sapling stands in the pine-grass areas of central Washington.

Science.gov (United States)

Robert W. Sassaman; James W. Barrett; Justin G. Smith

1972-01-01

Present net worth values earned by investments in precommercial thinning of stagnated ponderosa pine sapling stands are reported for three stocking levels. Thirteen timber management regimes are ranked by their returns from timber only, and 22 regimes are ranked according to their returns from timber and forage, with and without the allowable cut effect.

Vapor Intrusion Facility Points, South Bay CA, 2014, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — POINT locations for the South Bay Vapor Instrusion Sites were derived from the NPL data for Region 9. One site, Philips Semiconductor, was extracted from the...

Stable isotopic fractionation, climate change and episodic stagnation in the eastern Mediterranean during the late Quaternary

Energy Technology Data Exchange (ETDEWEB)

Vergnaud-Grazzini, C [Laboratoire de Geologie Dynamique, Paris (France); Ryan, W B.F. [Columbia Univ., Palisades, NY (USA). Lamont-Doherty Geological Observatory; Cita, M B [Milan Univ. (Italy)

1977-11-01

Fluctuations in the delta/sup 18/O composition of planktonic foraminifers in eastern Mediterranean piston cores indicate cycles with amplitudes much greater than those which can be attributed alone to global ice-volume changes. Isotopic values become markedly negative within lithostratigraphic levels characterized by the apparition of organic-rich sapropels. These owe their origin to the development of euxinic bottom water during episodes of basin-wide stagnation. The depletion of delta/sup 18/O in many of the sapropels is accompanied by the occurrence of poorly diversified planktonic faunas, and both phenomena are attributed to a strong dilution of the local eastern Mediterranean surface water mass by a combination of glacial run off from large continental ice sheets and by an important increase of regional precipitation synchronous with the transition from pleniglacial to kataglacial climate. Although sapropel accumulation occurs generally during intervals of warming of the Mediterranean region as determined from a quantitative evaluation of planktonic foraminiferal assemblages, the pre-125,000 years, local warming of eastern Mediterranean surface water lagged the acme of glacial melting by up to 15,000 years. Climatic and isotopic cycles are correlative within the eastern Mediterranean for lateral distances in excess of 1000 km and, except for amplitude and phase, they are in most aspects remarkably similar to those recorded in the equatorial Pacific and Caribbean.

Demographic stagnation and decline in Spain: A cause for concern?

Directory of Open Access Journals (Sweden)

Serrano-Martínez José-María

2018-03-01

Full Text Available For years, the Spanish population has been rapidly ageing, showing signs of atony and stagnation. Between 1996 and 2007, in a phase of economic growth, the entry of foreign immigrants drove a global increase in population. But after the economic recession migratory flows show negative net balances. Our objective is to explain and confirm the demographic regression suffered by Spain. We are also interested in showing how the recent and intense immigration process has failed to generate significant changes in natural demographic characteristics and trends. National censuses, published by the National Institute of Statistics (INE, are our main source of demographic data. The analysis of the most recent relevant scientific literature has allowed us to compare opinions and discuss results. The data confirm an uncertain and worrying future for the Spanish population.

Passive Forensics for Region Duplication Image Forgery Based on Harris Feature Points and Local Binary Patterns

Directory of Open Access Journals (Sweden)

Jie Zhao

2013-01-01

Full Text Available Nowadays the demand for identifying the authenticity of an image is much increased since advanced image editing software packages are widely used. Region duplication forgery is one of the most common and immediate tampering attacks which are frequently used. Several methods to expose this forgery have been developed to detect and locate the tampered region, while most methods do fail when the duplicated region undergoes rotation or flipping before being pasted. In this paper, an efficient method based on Harris feature points and local binary patterns is proposed. First, the image is filtered with a pixelwise adaptive Wiener method, and then dense Harris feature points are employed in order to obtain a sufficient number of feature points with approximately uniform distribution. Feature vectors for a circle patch around each feature point are extracted using local binary pattern operators, and the similar Harris points are matched based on their representation feature vectors using the BBF algorithm. Finally, RANSAC algorithm is employed to eliminate the possible erroneous matches. Experiment results demonstrate that the proposed method can effectively detect region duplication forgery, even when an image was distorted by rotation, flipping, blurring, AWGN, JPEG compression, and their mixed operations, especially resistant to the forgery with the flat area of little visual structures.

The role of atmospheric nuclear explosions on the stagnation of global warming in the mid 20th century

Science.gov (United States)

Fujii, Yoshiaki

2011-04-01

This study suggests that the cause of the stagnation in global warming in the mid 20th century was the atmospheric nuclear explosions detonated between 1945 and 1980. The estimated GST drop due to fine dust from the actual atmospheric nuclear explosions based on the published simulation results by other researchers (a single column model and Atmosphere-Ocean General Circulation Model) has served to explain the stagnation in global warming. Atmospheric nuclear explosions can be regarded as full-scale in situ tests for nuclear winter. The non-negligible amount of GST drop from the actual atmospheric explosions suggests that nuclear winter is not just a theory but has actually occurred, albeit on a small scale. The accuracy of the simulations of GST by IPCC would also be improved significantly by introducing the influence of fine dust from the actual atmospheric nuclear explosions into their climate models; thus, global warming behavior could be more accurately predicted.

Comprehensive analysis of Curie-point depths and lithospheric effective elastic thickness at Arctic Region

Science.gov (United States)

Lu, Y.; Li, C. F.

2017-12-01

Arctic Ocean remains at the forefront of geological exploration. Here we investigate its deep geological structures and geodynamics on the basis of gravity, magnetic and bathymetric data. We estimate Curie-point depth and lithospheric effective elastic thickness to understand deep geothermal structures and Arctic lithospheric evolution. A fractal exponent of 3.0 for the 3D magnetization model is used in the Curie-point depth inversion. The result shows that Curie-point depths are between 5 and 50 km. Curie depths are mostly small near the active mid-ocean ridges, corresponding well to high heat flow and active shallow volcanism. Large curie depths are distributed mainly at continental marginal seas around the Arctic Ocean. We present a map of effective elastic thickness (Te) of the lithosphere using a multitaper coherence technique, and Te are between 5 and 110 km. Te primarily depends on geothermal gradient and composition, as well as structures in the lithosphere. We find that Te and Curie-point depths are often correlated. Large Te are distributed mainly at continental region and small Te are distributed at oceanic region. The Alpha-Mendeleyev Ridge (AMR) and The Svalbard Archipelago (SA) are symmetrical with the mid-ocean ridge. AMR and SA were formed before an early stage of Eurasian basin spreading, and they are considered as conjugate large igneous provinces, which show small Te and Curie-point depths. Novaya Zemlya region has large Curie-point depths and small Te. We consider that fault and fracture near the Novaya Zemlya orogenic belt cause small Te. A series of transform faults connect Arctic mid-ocean ridge with North Atlantic mid-ocean ridge. We can see large Te near transform faults, but small Curie-point depths. We consider that although temperature near transform faults is high, but mechanically the lithosphere near transform faults are strengthened.

Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode

CERN Document Server

American Society for Testing and Materials. Philadelphia

1992-01-01

1.1 This practice covers a procedure for the exposure of solar collector cover materials to the natural weather environment at elevated temperatures that approximate stagnation conditions in solar collectors having a combined back and edge loss coefficient of less than 1.5 W/(m2 · °C). 1.2 This practice is suitable for exposure of both glass and plastic solar collector cover materials. Provisions are made for exposure of single and double cover assemblies to accommodate the need for exposure of both inner and outer solar collector cover materials. 1.3 This practice does not apply to cover materials for evacuated collectors, photovoltaic cells, flat-plate collectors having a combined back and edge loss coefficient greater than 1.5 W/(m2 ·° C), or flat-plate collectors whose design incorporates means for limiting temperatures during stagnation. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard t...

Flow stagnation volume and abdominal aortic aneurysm growth: Insights from patient-specific computational flow dynamics of Lagrangian-coherent structures.

Science.gov (United States)

Joly, Florian; Soulez, Gilles; Garcia, Damien; Lessard, Simon; Kauffmann, Claude

2018-01-01

Abdominal aortic aneurysms (AAA) are localized, commonly-occurring dilations of the aorta. When equilibrium between blood pressure (loading) and wall mechanical resistance is lost, rupture ensues, and patient death follows, if not treated immediately. Experimental and numerical analyses of flow patterns in arteries show direct correlations between wall shear stress and wall mechano-adaptation with the development of zones prone to thrombus formation. For further insights into AAA flow topology/growth interaction, a workout of patient-specific computational flow dynamics (CFD) is proposed to compute finite-time Lyapunov exponents and extract Lagrangian-coherent structures (LCS). This computational model was first compared with 4-D phase-contrast magnetic resonance imaging (MRI) in 5 patients. To better understand the impact of flow topology and transport on AAA growth, hyperbolic, repelling LCS were computed in 1 patient during 8-year follow-up, including 9 volumetric morphologic AAA measures by computed tomography-angiography (CTA). LCS defined barriers to Lagrangian jet cores entering AAA. Domains enclosed between LCS and the aortic wall were considered to be stagnation zones. Their evolution was studied during AAA growth. Good correlation - 2-D cross-correlation coefficients of 0.65, 0.86 and 0.082 (min, max, SD) - was obtained between numerical simulations and 4-D MRI acquisitions in 6 specific cross-sections from 4 patients. In follow-up study, LCS divided AAA lumens into 3 dynamically-isolated zones: 2 stagnation volumes lying in dilated portions of the AAA, and circulating volume connecting the inlet to the outlet. The volume of each zone was tracked over time. Although circulating volume remained unchanged during 8-year follow-up, the AAA lumen and main stagnation zones grew significantly (8 cm 3 /year and 6 cm 3 /year, respectively). This study reveals that transient transport topology can be quantified in patient-specific AAA during disease progression

One- and two-dimensional density and temperature measurements of an argon-neon Z-pinch plasma at stagnation

International Nuclear Information System (INIS)

Wong, K.L.; Springer, P.T.; Hammer, J.H.; Iglesias, C.A.; Osterheld, A.L.; Foord, M.E.; Bruns, H.C.; Emig, J.A.; Deeney, C.

1997-01-01

In order to benchmark and improve current 2D radiation magnetohydrodynamic (MHD) models of Z-pinch plasmas, we have performed experiments which characterize the plasma conditions at stagnation. In the experiments the SATURN pulsed power facility at Sandia National Laboratory was used to create an imploding Ar-Ne plasma. An absolutely calibrated, high resolution space- and time-resolving Johann crystal spectrometer was used to infer the electron temperature T e from the slope of the hydrogenlike Ne free-bound continuum, and the ion density n i from the Stark broadening of the Ar heliumlike Rydberg series. 2D electron temperature profiles of the plasma are obtained from a set of imaging crystals also focused on the Ne free-bound continuum. We shot two types of gas nozzles in the experiment, annular and uniform fill, which varies the amount of mass in the plasma. 2D local thermodynamic equilibrium (LTE) and non-LTE MHD models predict a radiating region denser and cooler than measured. copyright 1997 American Institute of Physics

Expert Evaluation of Potential Points of Economic Growth in the Regions of Russia and the Conditions of their Development

Directory of Open Access Journals (Sweden)

A. V. Tihonov

2017-01-01

Full Text Available Purpose: the main purpose of this article is to identify « growth points» of economic growth in the regions, determine their type, and assess the conditions for their development. Methods: the main feature of this study is to obtain an expert assessment of the qualitative aspects of regional development. The main source of empirical data was an online survey conducted by the authors in 2016. Results: the study identified potential «growth points» in five regions of the Russian Federation and determined their nature according to the idea of modernizing the socio-economic environment. The selected points allow to develop the potential of the region horizontally. However, there are certain problems that hinder this development and they have been identified. Conclusions and Relevance: at the moment, the identified «growth points» can not be classified as information or intellectual, but in all regions there is the possibility of activating such industries. The «growth points» allocated by experts are still potential, because their technical, technological and innovative components have medium level of development. «Growth points» in the Republic of Sakha and the Nizhny Novgorod region have a greater modernization activity. Such expertise can be used by local authorities to adjust development vectors and strategies. It can also be an element of monitoring the socioeconomic development of regions. 

3D Stagnation instabilities in MagLIF loads on the Z Generator

Science.gov (United States)

Jennings, Christopher

2017-10-01

Experiments with Magnetized Liner Inertial Fusion (MagLIF) loads have successfully demonstrated the premise of magnetized fusion. While these experiments are increasingly well diagnosed, many of the measurements (particularly during stagnation) are time integrated, limited in spatial resolution or require additional assumptions to interpret in the context of a structured, rapidly evolving system. As such, there is some ambiguity over what may be limiting performance. Poor laser coupling in preheating the fuel prior to implosion has been suggested as a mechanism. Mix of high Z contaminants that cool the fuel is also a significant concern. In addition, time integrated crystal imaging has shown significant structure in the final fuel assembly indicating potential disruption from instabilities. Understanding the balance between these degradation mechanisms is vital to progress with MagLif. We compare several sets of experimental data with synthetically generated data from systematically varied 3D resistive-MHD simulations to gain insight into the relative contributions of different degradation mechanisms. We demonstrate how some measurements strongly indicate disruption from liner material penetrating into the fuel at stagnation, and discuss the implications this has for how MagLif targets work and scale to larger drive currents. We then explore the extent to which different combinations of instability development, current delivery, high-Z mix into the fuel and initial laser deposition can be differentiated in our existing measurements. Better determining the dominant degradation mechanisms can directly influence the direction we take to improve performance, or our confidence in scaling these targets to higher currents. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International Inc. for the U.S. DoE's NNSA under contract DE-NA0003525.

Radiation Coupling with the FUN3D Unstructured-Grid CFD Code

Science.gov (United States)

Wood, William A.

2012-01-01

The HARA radiation code is fully-coupled to the FUN3D unstructured-grid CFD code for the purpose of simulating high-energy hypersonic flows. The radiation energy source terms and surface heat transfer, under the tangent slab approximation, are included within the fluid dynamic ow solver. The Fire II flight test, at the Mach-31 1643-second trajectory point, is used as a demonstration case. Comparisons are made with an existing structured-grid capability, the LAURA/HARA coupling. The radiative surface heat transfer rates from the present approach match the benchmark values within 6%. Although radiation coupling is the focus of the present work, convective surface heat transfer rates are also reported, and are seen to vary depending upon the choice of mesh connectivity and FUN3D ux reconstruction algorithm. On a tetrahedral-element mesh the convective heating matches the benchmark at the stagnation point, but under-predicts by 15% on the Fire II shoulder. Conversely, on a mixed-element mesh the convective heating over-predicts at the stagnation point by 20%, but matches the benchmark away from the stagnation region.

Hall effect on magnetohydrodynamic instabilities at an elliptic magnetic stagnation line

Science.gov (United States)

Spies, Günther O.; Faghihi, Mustafa

1987-06-01

To answer the question whether the Hall effect removes the unphysical feature of ideal magnetohydrodynamics of predicting small wavelength kink instabilities at any elliptic magnetic stagnation line, a normal mode analysis is performed of the motion of an incompressible Hall fluid about cylindrical Z-pinch equilibria with circular cross sections. The eigenvalue loci in the complex frequency plane are derived for the equilibrium with constant current density. Every particular mode becomes stable as the Hall parameter exceeds a critical value. This value, however, depends on the mode such that it increases to infinity as the ideal growth rate decreases to zero, implying that there always remains an infinite number of slowly growing instabilities. Correspondingly, the stability criterion for equilibria with arbitrary current distributions is independent of the Hall parameter.

Hall effect on magnetohydrodynamic instabilities at an elliptic magnetic stagnation line

International Nuclear Information System (INIS)

Spies, G.O.; Faghihi, M.

1987-01-01

To answer the question whether the Hall effect removes the unphysical feature of ideal magnetohydrodynamics of predicting small wavelength kink instabilities at any elliptic magnetic stagnation line, a normal mode analysis is performed of the motion of an incompressible Hall fluid about cylindrical Z-pinch equilibria with circular cross sections. The eigenvalue loci in the complex frequency plane are derived for the equilibrium with constant current density. Every particular mode becomes stable as the Hall parameter exceeds a critical value. This value, however, depends on the mode such that it increases to infinity as the ideal growth rate decreases to zero, implying that there always remains an infinite number of slowly growing instabilities. Correspondingly, the stability criterion for equilibria with arbitrary current distributions is independent of the Hall parameter

Bulk damping of sound in superfluid 3He--4He under stagnation of the normal component

International Nuclear Information System (INIS)

Karchava, T.A.; Sanikidze, D.G.; Chkhaidze, N.D.

1983-01-01

The propagation of waves in superfluid 3 He-- 4 He solutions is considered under partial stagnation of the normal component. The wave processes in capillaries are presented as a superposition of the first sound, second sound, and viscous and diffusion waves. The damping coefficients are calculated for the modified first sound and for the thermal wave in superfluid 3 He-- 4 He solutions and related to the viscosity, thermal conductivity, diffusion, barodiffusion, and thermodiffusion coefficients

Experimental Studies on Hypersonic Stagnation Point Chemical Environment

National Research Council Canada - National Science Library

Chazot, O

2006-01-01

Development of space transportation is a very challenging task. Hypersonic flight should be investigated in details to allow designing spacecraft according to the severe environment of their flight conditions...

The effect of mixing rates on the formation and growth of condensation aerosols in a model stagnation flow

KAUST Repository

Alshaarawi, Amjad; Bisetti, Fabrizio

2015-01-01

A steady, laminar stagnation flow configuration is adopted to investigate numerically the interaction between condensing aerosol particles and gas-phase transport across a canonical mixing layer. The mixing rates are varied by adjusting the velocity and length scales of the stagnation flow parametrically. The effect of mixing rates on particle concentration, polydispersity, and mean droplet diameter is explored and discussed. This numerical study reveals a complex response of the aerosol to varying flow times. Depending on the flow time, the variation of the particle concentration in response to varying mixing rates falls into one of the two regimes. For fast mixing rates, the number density and volume fraction of the condensing particles increase with residence time (nucleation regime). On the contrary, for low mixing rates, number density decreases with residence time and volume fraction reaches a plateau (condensation regime). It is shown that vapor scavenging by the aerosol phase is key to explaining the transition between these two regimes. The results reported here are general and illustrate genuine features of the evolution of aerosols forming by condensation of supersaturated vapor from heat and mass transport across mixing layers.

The effect of mixing rates on the formation and growth of condensation aerosols in a model stagnation flow

KAUST Repository

Alshaarawi, Amjad

2015-03-01

A steady, laminar stagnation flow configuration is adopted to investigate numerically the interaction between condensing aerosol particles and gas-phase transport across a canonical mixing layer. The mixing rates are varied by adjusting the velocity and length scales of the stagnation flow parametrically. The effect of mixing rates on particle concentration, polydispersity, and mean droplet diameter is explored and discussed. This numerical study reveals a complex response of the aerosol to varying flow times. Depending on the flow time, the variation of the particle concentration in response to varying mixing rates falls into one of the two regimes. For fast mixing rates, the number density and volume fraction of the condensing particles increase with residence time (nucleation regime). On the contrary, for low mixing rates, number density decreases with residence time and volume fraction reaches a plateau (condensation regime). It is shown that vapor scavenging by the aerosol phase is key to explaining the transition between these two regimes. The results reported here are general and illustrate genuine features of the evolution of aerosols forming by condensation of supersaturated vapor from heat and mass transport across mixing layers.

Regionalization and multiculturalism in sociological perspective

Directory of Open Access Journals (Sweden)

Tripković Milan B.

2002-01-01

Full Text Available This paper is an attempt to deal with current and also controversial problems of regionalization and multiculturality together, by putting them in a broader sociological perspective, and then questioning them on the example of the current position of Vojvodina and growing demands for democratization, deregulation and decentralization of Serbia. Starting with a question how to harmonize very strong need of modern societies for homogenization with the equally strong and legitimate need for heterogeneity, which was one of the first and basic questions that sociology posed to itself, the author points out that regionalization and multiculturality solve nothing by themselves alone, if they are not put in the context of the crisis of modernity, which opens space for constructing essentially different pluralistic society. Process of regionalization in general, and in Serbia particularly, appears as a rational choice only if it goes together with already mentioned processes of democratization deregulation and decentralization, which should provide relatively fast transformation of old structures through development of the new ones. In other words, regionalization must be looked upon as one of the moments of the process of foundation of new pluralistic society, which contributes to opening and development, and not to closing, stagnation or regress, which eliminates or alleviates old conflicts and prevents creation of the new ones, which eliminates harmful consequences of stiff centralization and at the same time does not call for equally harmful unreasonable fragmentation which encourages demands for autonomy of parts and at the same time does not prevent integration and solidarity, which respects differences and does not endanger the social unity.

An Extension of the Miller Equilibrium Model into the X-Point Region

Science.gov (United States)

Hill, M. D.; King, R. W.; Stacey, W. M.

2017-10-01

The Miller equilibrium model has been extended to better model the flux surfaces in the outer region of the plasma and scrape-off layer, including the poloidally non-uniform flux surface expansion that occurs in the X-point region(s) of diverted tokamaks. Equations for elongation and triangularity are modified to include a poloidally varying component and grad-r, which is used in the calculation of the poloidal magnetic field, is rederived. Initial results suggest that strong quantitative agreement with experimental flux surface reconstructions and strong qualitative agreement with poloidal magnetic fields can be obtained using this model. Applications are discussed. A major new application is the automatic generation of the computation mesh in the plasma edge, scrape-off layer, plenum and divertor regions for use in the GTNEUT neutral particle transport code, enabling this powerful analysis code to be routinely run in experimental analyses. Work supported by US DOE under DE-FC02-04ER54698.

Botulinum Toxin A for Oral Cavity Cancer Patients: In Microsurgical Patients BTX Injections in Major Salivary Glands Temporarily Reduce Salivary Production and the Risk of Local Complications Related to Saliva Stagnation

OpenAIRE

Corradino, Bartolo; Lorenzo, Sara Di; Moschella, Francesco

2012-01-01

In patients suffering from oral cavity cancer surgical treatment is complex because it is necessary to remove carcinoma and lymph node metastasis (through a radical unilateral or bilateral neck dissection) and to reconstruct the affected area by means of free flaps. The saliva stagnation in the post-operative period is a risk factor with regard to local complications. Minor complications related to saliva stagnation (such as tissue maceration and wound dehiscence) could become major complicat...

Stagnation and Storage of Strongly Depleted Melts in Slow-Ultraslow Spreading Oceans: Evidence from the Ligurian Tethys

Science.gov (United States)

Piccardo, Giovanni; Guarnieri, Luisa; Padovano, Matteo

2013-04-01

Our studies of Alpine-Apennine ophiolite massifs (i.e., Lanzo, Voltri, Ligurides, Corsica) show that the Jurassic Ligurian Tethys oceanic basin was a slow-ultraslow spreading basin, characterized by the exposures on the seafloor of mantle peridotites with extreme compositional variability. The large majority of these peridotites are made of depleted spinel harzburgites and plagioclase peridotites. The former are interpreted as reactive peridotites formed by the reactive percolation of under-saturated, strongly trace element depleted asthenospheric melts migrated by porous flow through the mantle lithosphere. The latter are considered as refertilized peridotites formed by peridotite impregnation by percolated silica-saturated, strongly trace element depleted melts. Strongly depleted melts were produced as low-degrees, single melt increments by near fractional melting of the passively upwelling asthenosphere during the rifting stage of the basin. They escaped single melt increment aggregation, migrated isolated through the mantle lithosphere by reactive porous or channeled flow before oceanic opening, and were transformed into silica-saturated derivative liquids that underwent entrapment and stagnation in the shallow mantle lithosphere forming plagioclase-enriched peridotites. Widespread small bodies of strongly depleted gabbro-norites testify for the local coalescence of these derivative liquids. These melts never reached the surface (i.e., the hidden magmatism), since lavas with their composition have never been found in the basin. Subsequently, aggregated MORB melts upwelled within replacive dunite channels (as evidenced by composition of magmatic clinopyroxenes in dunites), intruded at shallow levels as olivine gabbro bodies and extruded as basaltic lavas, to form the crustal rocks of the oceanic lithosphere (i.e., the oceanic magmatism). Km-scale bodies of MORB olivine gabbros were intruded into the plagioclase-enriched peridotites, which were formed in the

Reynolds number and geometry effects in laminar axisymmetric isothermal counterflows

KAUST Repository

Scribano, Gianfranco; Bisetti, Fabrizio

2016-01-01

dependence of the velocity field with respect to the separation ratio is linked to a high pressure region at the stagnation point. On the other hand, Reynolds number effects highlight the role played by the wall boundary layer on the interior of the nozzles

An analytical study on groundwater flow in drainage basins with horizontal wells

Science.gov (United States)

Wang, Jun-Zhi; Jiang, Xiao-Wei; Wan, Li; Wang, Xu-Sheng; Li, Hailong

2014-06-01

Analytical studies on release/capture zones are often limited to a uniform background groundwater flow. In fact, for basin-scale problems, the undulating water table would lead to the development of hierarchically nested flow systems, which are more complex than a uniform flow. Under the premise that the water table is a replica of undulating topography and hardly influenced by wells, an analytical solution of hydraulic head is derived for a two-dimensional cross section of a drainage basin with horizontal injection/pumping wells. Based on the analytical solution, distributions of hydraulic head, stagnation points and flow systems (including release/capture zones) are explored. The superposition of injection/pumping wells onto the background flow field leads to the development of new internal stagnation points and new flow systems (including release/capture zones). Generally speaking, the existence of n injection/pumping wells would result in up to n new internal stagnation points and up to 2n new flow systems (including release/capture zones). The analytical study presented, which integrates traditional well hydraulics with the theory of regional groundwater flow, is useful in understanding basin-scale groundwater flow influenced by human activities.

The unsteady flow of a nanofluid in the stagnation point region of a time-dependent rotating sphere

Directory of Open Access Journals (Sweden)

Malvandi Amir

2015-01-01

Full Text Available This paper deals with the unsteady boundary layer flow and heat transfer of nanofluid over a time-dependent rotating sphere where the free stream velocity varies continuously with time. The boundary layer equations were normalized via similarity variables and solved numerically. Best accuracy of the results has been obtained for regular fluid with previous studies. The nanofluid is treated as a two-component mixture (base fluid+nanoparticles that incorporates the effects of Brownian diffusion and thermophoresis simultaneously as the two most important mechanisms of slip velocity in laminar flows. Our outcomes indicated that as A and λ increase, surface shear stresses, heat transfer and concentration rates, climb up. Also, Increasing the thermophoresis Nt is found to decrease in the both values of heat transfer and concentration rates. This decrease supresses for higher thermophoresis number. In addition, it was observed that unlike the heat transfer rate, a rise in Brownian motion Nb, leads to an increase in concentration rate.

Segmentation of Large Unstructured Point Clouds Using Octree-Based Region Growing and Conditional Random Fields

Science.gov (United States)

Bassier, M.; Bonduel, M.; Van Genechten, B.; Vergauwen, M.

2017-11-01

Point cloud segmentation is a crucial step in scene understanding and interpretation. The goal is to decompose the initial data into sets of workable clusters with similar properties. Additionally, it is a key aspect in the automated procedure from point cloud data to BIM. Current approaches typically only segment a single type of primitive such as planes or cylinders. Also, current algorithms suffer from oversegmenting the data and are often sensor or scene dependent. In this work, a method is presented to automatically segment large unstructured point clouds of buildings. More specifically, the segmentation is formulated as a graph optimisation problem. First, the data is oversegmented with a greedy octree-based region growing method. The growing is conditioned on the segmentation of planes as well as smooth surfaces. Next, the candidate clusters are represented by a Conditional Random Field after which the most likely configuration of candidate clusters is computed given a set of local and contextual features. The experiments prove that the used method is a fast and reliable framework for unstructured point cloud segmentation. Processing speeds up to 40,000 points per second are recorded for the region growing. Additionally, the recall and precision of the graph clustering is approximately 80%. Overall, nearly 22% of oversegmentation is reduced by clustering the data. These clusters will be classified and used as a basis for the reconstruction of BIM models.

Regional air pollution at a turning point.

Science.gov (United States)

Grennfelt, Peringe; Hov, Oystein

2005-02-01

The control of transboundary air pollution in Europe has been successful. Emissions of many key pollutants are decreasing and there are signs of improvements in damaged ecosystems. The strategies under development within the CAFE programme under the European Commission and the Convention on Long-range Transboundary Air Pollution (CLRTAP), aim to take regional air pollution control a large step further, in particular with respect to small particles. In this paper we highlight the new strategies but look primarily at socioeconomic trends and climate change feedbacks that may have a significant influence on the outcome of the strategies and which so far have not been considered. In particular, we point out the influence on air quality of increased summer temperatures in Europe and of increasing emissions including international shipping, outside of Europe. Taken together the further emissions reductions in Europe and the increasing background pollution, slowly cause a greying of the Northern Hemisphere troposphere rather than the traditional picture of dominant emissions in Europe and North America ('black') with much lower emission intensities elsewhere ('white'). A hemispheric approach to further combat air pollution will become necessary in Europe and elsewhere.

[Comparative analysis on the biological basis of blood stasis syndrome induced by qi-stagnation and qi-deficiency in patients with unstable angina pectoris].

Science.gov (United States)

Ren, Jian-xun; Liu, Jian-xun; Lin, Cheng-ren

2010-04-01

To comparatively analyse the objective characteristics of different syndrome types of qi-disturbance-induced blood stasis syndrome (QDBS) in the pathogenetic evolution of unstable angina coronary heart disease (UA-CHD). Seventy-eight patients with UA-CHD of QDBS were differentiated into 2 groups: 55 in the qi-deficiency-induced blood-stasis syndrome group (A) and 23 in the qi-stagnation-induced blood-stasis syndrome group (B). The comparative analysis on them was carried out through comparing their blood pressure, glucose and lipid metabolisms, coagulation function, thyroid function and inflammation reaction changes, etc. In the pathogenetic process of qi-disturbance induced blood stasis, the initiating age, levels of HbA1c, TSH, PT and APTT between the two groups were significantly different (P emotional stress is possibly the essence of qi-stagnation induced blood stasis syndrome.

Kinetic modeling of particle acceleration in a solar null point reconnection region

DEFF Research Database (Denmark)

Baumann, Gisela; Haugbølle, Troels; Nordlund, Åke

2013-01-01

The primary focus of this paper is on the particle acceleration mechanism in solar coronal 3D reconnection null-point regions. Starting from a potential field extrapolation of a SOHO magnetogram taken on 2002 November 16, we first performed MHD simulations with horizontal motions observed by SOHO...... particles and 3.5 billion grid cells of size 17.5\\,km --- these simulations offer a new opportunity to study particle acceleration in solar-like settings....... applied to the photospheric boundary of the computational box. After a build-up of electric current in the fan-plane of the null-point, a sub-section of the evolved MHD data was used as initial and boundary conditions for a kinetic particle-in-cell model of the plasma. We find that sub...

Role Overload, Role Self Distance, Role Stagnation as Determinants of Job Satisfaction and Turnover Intention in Banking Sector

Science.gov (United States)

Kunte, Monica; Gupta, Priya; Bhattacharya, Sonali; Neelam, Netra

2017-01-01

Purpose: This study examined the relationship of the organizational role stress: Role overload, role self-distance, and role stagnation with job satisfaction and turnover intention with a sample of banking employees in India. Methodology: In this research, we used the RODS scale developed by Prohit and Pareek (2010) for measuring occupational role scale. The reliability of the scale came out to be 0.71. Findings: The majority of employees of all ranks, in both private and public sector banks, suffer from high role stress of all types. It was found that role overload and role stagnation are inversely associated with banking employees' job satisfaction. Private sector bank employees have more role stress and more unsatisfied than employees of public sector banks. Employees Turnover intention was found to be positively impacted by job satisfaction, contrary to many other studies. Possible reasons have been suggested. Job satisfaction was found to play a partial mediating role in the relationship between role overload and turnover intention with 40% mediation. Further, employees with longer tenure (work experience) have less role stress and are more satisfied. Originality: This study is unique in the sense there is hardly any study linking role stress to job satisfaction and turnover intention, specially in Indian context. PMID:29200554

Role Overload, Role Self Distance, Role Stagnation as Determinants of Job Satisfaction and Turnover Intention in Banking Sector.

Science.gov (United States)

Kunte, Monica; Gupta, Priya; Bhattacharya, Sonali; Neelam, Netra

2017-01-01

This study examined the relationship of the organizational role stress: Role overload, role self-distance, and role stagnation with job satisfaction and turnover intention with a sample of banking employees in India. In this research, we used the RODS scale developed by Prohit and Pareek (2010) for measuring occupational role scale. The reliability of the scale came out to be 0.71. The majority of employees of all ranks, in both private and public sector banks, suffer from high role stress of all types. It was found that role overload and role stagnation are inversely associated with banking employees' job satisfaction. Private sector bank employees have more role stress and more unsatisfied than employees of public sector banks. Employees Turnover intention was found to be positively impacted by job satisfaction, contrary to many other studies. Possible reasons have been suggested. Job satisfaction was found to play a partial mediating role in the relationship between role overload and turnover intention with 40% mediation. Further, employees with longer tenure (work experience) have less role stress and are more satisfied. This study is unique in the sense there is hardly any study linking role stress to job satisfaction and turnover intention, specially in Indian context.

A numerical study for off-centered stagnation flow towards a rotating disc

Directory of Open Access Journals (Sweden)

M. Heydari

2015-09-01

Full Text Available In this investigation, a semi-numerical method based on Bernstein polynomials for solving off-centered stagnation flow towards a rotating disc is introduced. This method expands the desired solutions in terms of a set of Bernstein polynomials over a closed interval and then makes use of the tau method to determine the expansion coefficients to construct approximate solutions. This method can satisfy boundary conditions at infinity. The properties of Bernstein polynomials are presented and are utilized to reduce the solution of governing nonlinear equations and their associated boundary conditions to the solution of algebraic equations. Graphical results are presented to investigate the influence of the rotation ratio α on the radial velocity, azimuthal velocity and the induced velocities. A comparative study with the previous results of viscous fluid flow in the literature is made.

Assessment of Fuel Analysis Methodology and Fission Product Release for 37-Element Fuel by Using the Latest IST Codes during Stagnation Feeder Break in CANDU

International Nuclear Information System (INIS)

Park, Joo Hwan; Jung, Jong Yeob

2009-09-01

Feeder break accident is regarded as one of the design basis accident in CANDU reactor which results in a fuel failure. For a particular range of inlet feeder break sizes, the flow in the channel is reduced sufficiently that the fuel and fuel channel integrity can be significantly affected to have damage in the affected channel, while the remainder of the core remains adequately cooled. The flow in the downstream channel can be more or less stagnated due to a balance between pressure at the break on the upstream side and the reverse driving pressure between the break and the downstream end. In the extreme, this can lead to rapid fuel heatup and fuel damage and failure of the fuel channel similar to that associated with a severe channel flow blockage. Such an inlet feeder break scenario is called a stagnation break. In this report, the fuel analysis methodology and the assessment results of fission product inventory and release during the stagnation feeder break are described for conservatively assumed limiting channel. The accident was assumed to be occurred in the refurbished Wolsong unit 1 and the latest safety codes were used in the analysis. Fission product inventories during the steady state were calculated by using ELESTRES-IST 1.2 code. The whole analysis process was carried out by a script file which was programmed by Perl language. The perl script file was programmed to make all ELESTRES input files for each bundle and each ring based on the given power-burnup history and thermal-hydraulic conditions of the limiting channel and to perform the fuel analysis automatically. The fission product release during the transient period of stagnation feeder break was evaluated by applying Gehl model. The amounts of each isotope's release are conservatively evaluated for additional 2 seconds after channel failure. The calculated fission product releases are provided to the following dose assessment as a source term

Biological nitrate transport in sediments on the Peruvian margin mitigates benthic sulfide emissions and drives pelagic N loss during stagnation events

Science.gov (United States)

Dale, A. W.; Sommer, S.; Lomnitz, U.; Bourbonnais, A.; Wallmann, K.

2016-06-01

Benthic N cycling in the Peruvian oxygen minimum zone (OMZ) was investigated at ten stations along 12 °S from the middle shelf (74 m) to the upper slope (1024 m) using in situ flux measurements, sediment biogeochemistry and modeling. Middle shelf sediments were covered by mats of the filamentous bacteria Thioploca spp. and contained a large 'hidden' pool of nitrate that was not detectable in the porewater. This was attributed to a biological nitrate reservoir stored within the bacteria to oxidize sulfide during 'dissimilatory nitrate reduction to ammonium' (DNRA). The extremely high rates of DNRA on the shelf (15.6 mmol m-2 d-1 of N), determined using an empirical steady-state model, could easily supply all the ammonium requirements for anammox in the water column. The model further showed that denitrification by foraminifera may account for 90% of N2 production at the lower edge of the OMZ. At the time of sampling, dissolved oxygen was below detection limit down to 400 m and the water body overlying the shelf had stagnated, resulting in complete depletion of nitrate and nitrite. A decrease in the biological nitrate pool was observed on the shelf during fieldwork concomitant with a rise in porewater sulfide levels in surface sediments to 2 mM. Using a non-steady state model to simulate this natural anoxia experiment, these observations were shown to be consistent with Thioploca surviving on a dwindling intracellular nitrate reservoir to survive the stagnation period. The model shows that sediments hosting Thioploca are able to maintain high ammonium fluxes for many weeks following stagnation, potentially sustaining pelagic N loss by anammox. In contrast, sulfide emissions remain low, reducing the economic risk to the Peruvian fishery by toxic sulfide plume development.

Role Overload, Role Self Distance, Role Stagnation as Determinants of Job Satisfaction and Turnover Intention in Banking Sector

OpenAIRE

Kunte, Monica; Gupta, Priya; Bhattacharya, Sonali; Neelam, Netra

2017-01-01

Purpose: This study examined the relationship of the organizational role stress: Role overload, role self-distance, and role stagnation with job satisfaction and turnover intention with a sample of banking employees in India. Methodology: In this research, we used the RODS scale developed by Prohit and Pareek (2010) for measuring occupational role scale. The reliability of the scale came out to be 0.71. Findings: The majority of employees of all ranks, in both private and public sector banks,...

Hall effect upon small wavelength kink instabilities near an elliptic magnetic stagnation line

International Nuclear Information System (INIS)

Spies, G.O.; Faghihi, M.

1985-12-01

To explore the question whether the Hall effect removes the unphysical feature of ideal magnetohydrodynamics of predicting unstable small wavelenght kinks near any elliptic magnetic stagnation line, a spectral analysis is performed of the motion of an incompressible plasma about cylindrical Z-pinch equilibria with circular sections. The eigenvalue loci in the complex frequency plane are derived for the equilibrium with constant current density. These show that every particular mode becomes stable as the Hall parameter exceeds a critical value. However, this critical value is a decreasing function of the ideal growth rate and has a pole at the origin, implying that there always remains an infinite reservoir of slowly growing instabilities. Correspondingly, for equilibiria with arbitrary current distributions, the stability criterion is unaffected by the Hall term. (author)

A Labeling Model Based on the Region of Movability for Point-Feature Label Placement

Directory of Open Access Journals (Sweden)

Lin Li

2016-09-01

Full Text Available Automatic point-feature label placement (PFLP is a fundamental task for map visualization. As the dominant solutions to the PFLP problem, fixed-position and slider models have been widely studied in previous research. However, the candidate labels generated with these models are set to certain fixed positions or a specified track line for sliding. Thus, the whole surrounding space of a point feature is not sufficiently used for labeling. Hence, this paper proposes a novel label model based on the region of movability, which comes from plane collision detection theory. The model defines a complete conflict-free search space for label placement. On the premise of no conflict with the point, line, and area features, the proposed model utilizes the surrounding zone of the point feature to generate candidate label positions. By combining with heuristic search method, the model achieves high-quality label placement. In addition, the flexibility of the proposed model enables placing arbitrarily shaped labels.

Stagnating Jatropha Biofuel Development in Southwest China: An Institutional Approach

Directory of Open Access Journals (Sweden)

Jia Li

2014-05-01

Full Text Available Biodiesel from jatropha has been considered as a promising alternative to fossil fuels for some time. Consequently, China started promoting jatropha as one of the options to meet its ever-increasing energy consumption, and the Chinese biodiesel industry also gained interest. However, the excitement of the biofuel industry in jatropha faded after it did not bring about the expected results. This article investigates the stagnation in jatropha development and production for biodiesel in China, using two detailed case studies of jatropha biofuel production in southeast China. It is found that the underdeveloped biodiesel policy and regulation, such as a rather late formulation of standards for biodiesel (especially the B5 and the absence of mandatory targets, is an important reason for hampering jatropha development. Besides that, lack of financial support undermined sustained jatropha planting at the farm level and lack of sustained commitment from state-owned enterprises or private companies over a long time span further contributed to jatropha project’s failure. Better implementation of the rule of law, mandatory blending requirements, hazard insurance, as well as continuous financial support, might improve the continuation of jatropha plantation schemes.

The registration of non-cooperative moving targets laser point cloud in different view point

Science.gov (United States)

Wang, Shuai; Sun, Huayan; Guo, Huichao

2018-01-01

Non-cooperative moving target multi-view cloud registration is the key technology of 3D reconstruction of laser threedimension imaging. The main problem is that the density changes greatly and noise exists under different acquisition conditions of point cloud. In this paper, firstly, the feature descriptor is used to find the most similar point cloud, and then based on the registration algorithm of region segmentation, the geometric structure of the point is extracted by the geometric similarity between point and point, The point cloud is divided into regions based on spectral clustering, feature descriptors are created for each region, searching to find the most similar regions in the most similar point of view cloud, and then aligning the pair of point clouds by aligning their minimum bounding boxes. Repeat the above steps again until registration of all point clouds is completed. Experiments show that this method is insensitive to the density of point clouds and performs well on the noise of laser three-dimension imaging.

Regional Entrepreneurship Culture and the Business Lifecycle: Patterns from the Moravian-Silesian Region

Directory of Open Access Journals (Sweden)

Jarmila Šebestová

2015-01-01

Full Text Available The main goal of the paper is to focus on relationship between business cycle under regional entrepreneurial culture. Many of the trends found were less than positive, although there were some new positive trends that could be identified as a source of sustainability in the area of the connection between the sector of small and medium sized enterprises and the local entrepreneurship environment as well as a source of entrepreneurial culture. Moreover, the frequency of co-operational activities with local government was investigated. Questionnaire-based research was undertaken within 194 organizations of various legal forms operating in the area of the Moravian-Silesian Region. The main factors, which had an influence on their current business stage (49.5% in the growth stage, 9.8% in stagnation, 31.96% in decline and the other 0.52% in crisis, were the locality in the region, the quality of the labour force, cooperation with local public bodies and the business relationships between suppliers. Finally, we have defined the current stage of the entrepreneurial culture as the “Sandbox”.

Overcoming Stagnation in the Levels and Distribution of Child Mortality: The Case of the Philippines.

Directory of Open Access Journals (Sweden)

Raoul Bermejo

Full Text Available Health-related within-country inequalities continue to be a matter of great interest and concern to both policy makers and researchers. This study aims to assess the level and the distribution of child mortality outcomes in the Philippines across geographical and socioeconomic indicators.Data on 159,130 children ever borne were analysed from five waves of the Philippine Demographic and Health Survey. Direct estimation was used to construct under-five and neonatal mortality rates for the period 1980-2013. Rate differences and ratios, and where possible, slope and relative indices of inequality were calculated to measure disparities on absolute and relative scales. Stratification was undertaken by levels of rural/urban location, island groups and household wealth.National under-five and neonatal mortality rates have shown considerable albeit differential reductions since 1980. Recently released data suggests that neonatal mortality has declined following a period of stagnation. Declines in under-five mortality have been accompanied by decreases in wealth and geography-related absolute inequalities. However, relative inequalities for the same markers have remained stable over time. For neonates, mixed evidence suggests that absolute and relative inequalities have remained stable or may have risen.In addition to continued reductions in under-five mortality, new data suggests that the Philippines have achieved success in addressing the commonly observed stagnated trend in neonatal mortality. This success has been driven by economic improvement since 2006 as well as efforts to implement a nationwide universal health care campaign. Yet, such patterns, nonetheless, accorded with persistent inequalities, particularly on a relative scale. A continued focus on addressing universal coverage, the influence of decentralisation and armed conflict, and issues along the continuum of care is advocated.

THERMOSS: a thermohydraulic model of flow stagnation in a horizontal fuel channel

International Nuclear Information System (INIS)

Gulshani, P.; Caplan, M.Z.; Spinks, N.J.

1984-01-01

Following a postulated inlet-side small break in the CANDU reactor, emergency coolant is injected to refull the horizontal fuel channels and remove the decay heat. As part of the accident analysis, the effects of loss of forced circulation during the accident are predicted. A break size exists for which, at the end of pump rundown, the break force balances the natural circulation force and the channel flow is reduced to near zero. The subcooled, stagnant channel condition is referred to as the standing-start condition. Subsequently, the channel coolant boils and stratifies. Eventually the steam flow from the channel heats up the endfitting to the saturation temperature and reaches the vertical feeder. The resulting buoyancy-induced flow then refills the channel. One dimensional, two-fluid conservation equations are solved in closed form to predict the duration of stagnation. In this calculation the channel water level is an important intermediate variable because it determines the amount of steam production

Categorization of flow conditions using Integral quantities for characterizing stagnation and recirculation

International Nuclear Information System (INIS)

Han, M.H.; Hwang, W.T.; Jeong, H.J.; Kim, E.H.

2008-01-01

This paper describes a method for categorizing an atmospheric flow condition of a site by using integral quantities for characterizing stagnation and recirculation. Authors have devised a method for categorizing flow conditions using distribution curves which represent the flow condition of the whole of Korea. It was found that the flow conditions for four nuclear power plant sites were good enough from a meteorological aspect. Among the four sites, Kori nuclear power plant site which is located at the south-eastern part of the Korean peninsular shows the best condition. Meteorological condition is the key factor for estimating the environmental effects of a nuclear facility. The devised method can be used for assessing the relative environmental risk of a nuclear facility with only meteorological data. And the devised categorization method can be used for choosing a suitable site for an industrial facility such as a nuclear power plant and a chemical complex. (author)

Origin, quantities produced and ways of conditioning of special wastes in regional collection points

International Nuclear Information System (INIS)

Neider, R.

1983-01-01

Radioactive substances to be collected at regional collecting points are mostly related to the radionuclides H-3, Ra-226 and Th-232. These special wastes form a particular group of wastes including such solid wastes which do not contain volatile radionuclides yet cannot, for other reasons, be conditioned in accordance with the old Asse qualifications. (orig./DG) [de

Minimising the risk of water hammer and other problems at the beginning of stagnation of solar thermal plants - A theoretical approach

International Nuclear Information System (INIS)

Streicher, W.

2000-01-01

Solar plants are increasingly used not only for hot tap water heating but also for the assistance of space heating. These plants produce much more energy in summer than needed, which often results in stagnation. Because of stagnation-temperatures of todays selective collectors up to 200 deg. C, the collector fluid evaporates. In several plants a high noise level and a vibration of the plant during this evaporation phase is reported. This is due to the occurrence of water hammers in the system, when liquid collector fluid passes areas where the fluid was already evaporated and superheated. The remaining vapor bubbles deflate rapidly and the liquid phases collide with high velocity, which results in a rapid pressure increase. This paper describes the theory of condensate-induced water hammers and conditions of solar plants, under which this can happen. A simulation model for the evaporation phase of the collector is presented to give a deeper understanding about the influences of solar radiation, the size of the tubing, and the size of the expansion device on the process of the evaporation. Three hydraulic layouts of the collector area are discussed for there possibilities producing water hammers. (au)

Local economic development in theories of regional economies and rural studies

Directory of Open Access Journals (Sweden)

Kačar Bahrija

2016-01-01

Full Text Available In this paper is a detailed analysis of the basics in the theory of economic development during the period from mid last century until today. It states the most significant theories, points out their ranges, offers a critical review regarding their treatment of development, especially regional, rural and local one. It observes those theories according to different classifications existing in scientific literature, primarily the ascend theory, stagnation theory, balanced economic growth theory; then, short-term and long-term development and growth theories; traditional and endogenous theories; economic growth stages theory emphasized after the WWII; structural changes theory; dependency theory, neo-classic counter-revolution theory and endogenous theory as a new growth theory. The analysis becomes wider with a study on development in regional economy theories and rural studies and it systematizes the classification of those theories according to regional economy academics. Distancing ourselves from any particular division as the most suitable and acceptable one, the theories are treated separately and in an historic context, in order to encircle the time framework which from modern theories, dealing with local level development difficulties, resulted. It asserts The Community-led Rural Development Theory, often referred to as the Community Development Theory, or marked as Bottom-up Partnership Approach. The analysis of development theories asserts that mixed exogenous - endogenous approach to development links the rural/local development to the globalization process mostly due to fast technology changes of the IT and communication sectors.

Trend and change point analyses of annual precipitation in the Souss-Massa Region in Morocco during 1932-2010

Science.gov (United States)

Abahous, H.; Ronchail, J.; Sifeddine, A.; Kenny, L.; Bouchaou, L.

2017-11-01

In the context of an arid area such as Souss Massa Region, the availability of time series analysis of observed local data is vital to better characterize the regional rainfall configuration. In this paper, dataset of monthly precipitation collected from different local meteorological stations during 1932-2010, are quality controlled and analyzed to detect trend and change points. The temporal distribution of outliers shows an annual cycle and a decrease of their number since the 1980s. The results of the standard normal homogeneity test, penalized maximal t test, and Mann-Whitney-Pettit test show that 42% of the series are homogeneous. The analysis of annual precipitation in the region of Souss Massa during 1932-2010 shows wet conditions with a maximum between 1963 and 1965 followed by a decrease since 1973. The latter is identified as a statistically significant regional change point in Western High Atlas and Anti Atlas Mountains highlighting a decline in long-term average precipitation.

Regional Coordination: A Point of View.

Science.gov (United States)

Faibisoff, Sylvia G.

To more adequately provide for newly perceived user needs, New York State libraries have adopted the philosophy of regionalism through which public, academic, and special libraries can cooperate and share resources. The state's 22 public library systems and 9 3R regions (Reference and Research Library Resources Councils) are organized…

Advection-diffusion model for normal grain growth and the stagnation of normal grain growth in thin films

International Nuclear Information System (INIS)

Lou, C.

2002-01-01

An advection-diffusion model has been set up to describe normal grain growth. In this model grains are divided into different groups according to their topological classes (number of sides of a grain). Topological transformations are modelled by advective and diffusive flows governed by advective and diffusive coefficients respectively, which are assumed to be proportional to topological classes. The ordinary differential equations governing self-similar time-independent grain size distribution can be derived analytically from continuity equations. It is proved that the time-independent distributions obtained by solving the ordinary differential equations have the same form as the time-dependent distributions obtained by solving the continuity equations. The advection-diffusion model is extended to describe the stagnation of normal grain growth in thin films. Grain boundary grooving prevents grain boundaries from moving, and the correlation between neighbouring grains accelerates the stagnation of normal grain growth. After introducing grain boundary grooving and the correlation between neighbouring grains into the model, the grain size distribution is close to a lognormal distribution, which is usually found in experiments. A vertex computer simulation of normal grain growth has also been carried out to make a cross comparison with the advection-diffusion model. The result from the simulation did not verify the assumption that the advective and diffusive coefficients are proportional to topological classes. Instead, we have observed that topological transformations usually occur on certain topological classes. This suggests that the advection-diffusion model can be improved by making a more realistic assumption on topological transformations. (author)

Risk-based prioritization of ground water threatening point sources at catchment and regional scales

DEFF Research Database (Denmark)

Overheu, Niels Døssing; Tuxen, Nina; Flyvbjerg, John

2014-01-01

framework has been developed to enable a systematic and transparent risk assessment and prioritization of contaminant point sources, considering the local, catchment, or regional scales (Danish EPA, 2011, 2012). The framework has been tested in several catchments in Denmark with different challenges...... and needs, and two of these are presented. Based on the lessons learned, the Danish EPA has prepared a handbook to guide the user through the steps in a risk-based prioritization (Danish EPA, 2012). It provides guidance on prioritization both in an administratively defined area such as a Danish Region...... of the results are presented using the case studies as examples. The methodology was developed by a broad industry group including the Danish EPA, the Danish Regions, the Danish Nature Agency, the Technical University of Denmark, and consultants — and the framework has been widely accepted by the professional...

Point mutations in the post-M2 region of human alpha-ENaC regulate cation selectivity.

Science.gov (United States)

Ji, H L; Parker, S; Langloh, A L; Fuller, C M; Benos, D J

2001-07-01

We tested the hypothesis that an arginine-rich region immediately following the second transmembrane domain may constitute part of the inner mouth of the epithelial Na+ channel (ENaC) pore and, hence, influence conduction and/or selectivity properties of the channel by expressing double point mutants in Xenopus oocytes. Double point mutations of arginines in this post-M2 region of the human alpha-ENaC (alpha-hENaC) led to a decrease and increase in the macroscopic conductance of alphaR586E,R587Ebetagamma- and alphaR589E,R591Ebetagamma-hENaC, respectively, but had no effect on the single-channel conductance of either double point mutant. However, the apparent equilibrium dissociation constant for Na+ was decreased for both alphaR586E,R587Ebetagamma- and alphaR589E,R591Ebetagamma-hENaC, and the maximum amiloride-sensitive Na+ current was decreased for alphaR586E,R587Ebetagamma-hENaC and increased for alphaR589E,R591Ebetagamma-hENaC. The relative permeabilities of Li+ and K+ vs. Na+ were increased 11.25- to 27.57-fold for alphaR586E,R587Ebetagamma-hENaC compared with wild type. The relative ion permeability of these double mutants and wild-type ENaC was inversely related to the crystal diameter of the permeant ions. Thus the region of positive charge is important for the ion permeation properties of the channel and may form part of the pore itself.

Public Policy and Corporate Protectionism: Regional Institutions and Textile Guilds in Seventeenth Century Aragon

Directory of Open Access Journals (Sweden)

José Antonio MATEOS ROYO

2015-12-01

Full Text Available Based on a regional case study, this article will argue that the craft guilds could respond adaptively to changing economic and institutional factors. This flexibility would limit any independent and regular impact of these guilds on regional or state economies in early modern Europe. Having contributed to economic growth in the sixteenth century, the Aragonese textile guilds fell prey to technological stagnation in the seventeenth, while restricting competition in urban product and labour markets as the region’s economy contracted. Their actions thus undermined quality and raised the cost of domestic manufactures. The regional institutions nevertheless tolerated these strategies within certain limits, because they saw the guilds as necessary to organize urban markets and production.

Dynamics of investment in fixed capital in the economy of the Northern regions

Directory of Open Access Journals (Sweden)

Yusif Alimovich Gadzhiev

2015-03-01

Full Text Available The article describes characteristics and trends of investment in fixed capital of the Northern regions. It singles out phases of rapid pre-crisis growth, crisis, post-crisis growth and stagnation. Stagnation and decline in recent years are caused by completed major investment projects, reduced own funds of enterprises, limited availability of investment resources and increased capital outflow. The article reveals that the growth of investment in fixed capital of the North in the post-crisis period is provided by the regions, carrying out major investment in oil and gas pipeline transport, oil extraction, production and distribution of electricity, gas and water. The changes in the sectoral structure of investment in fixed capital of the Northern regions are barely visible; the share of investment in the traded sector is still high, especially in mining, due to the Northern regions’ specialization in the extractive industries. The share of investment in the public sector and social services remains low. The specific structure of investment in fixed capital has changed: the share of investment in buildings (excluding housing and structures has increased greatly; the share of investment in machinery, equipment, vehicles has decreased due to insufficient investment in mining enterprises and financial shortages in manufacturing. In most regions the structure of investment in fixed capital by directions is characterized by the increase in the share of investment in machinery, equipment, vehicles in new construction, investment in buildings and structures and the decline in the proportion of investment in machinery, equipment, vehicles modernization and reconstruction and acquisition of new fixed assets. The dynamics and the inefficient structure of investment in fixed assets and directions testify the shortage of investment in innovation in the Northern regions

Spin Transition in the Lower Mantle: Deep Learning and Pattern Recognition of Superplumes from the Mid-mantle and Mid-mantle Slab Stagnation

Science.gov (United States)

Yuen, D. A.; Shahnas, M. H.; De Hoop, M. V.; Pysklywec, R.

2016-12-01

The broad, slow seismic anomalies under Africa and Pacific cannot be explained without ambiguity. There is no well-established theory to explain the fast structures prevalent globally in seismic tomographic images that are commonly accepted to be the remnants of fossil slabs at different depths in the mantle. The spin transition from high spin to low spin in iron in ferropericlase and perovskite, two major constituents of the lower mantle can significantly impact their physical properties. We employ high resolution 2D-axisymmetric and 3D-spherical control volume models to reconcile the influence of the spin transition-induced anomalies in density, thermal expansivity, and bulk modulus in ferropericlase and perovskite on mantle dynamics. The model results reveal that the spin transition effects increase the mixing in the lower regions of mantle. Depending on the changes of bulk modulus associated with the spin transition, these effects may also cause both stagnation of slabs and rising plumes at mid-mantle depths ( 1600 km). The stagnation may be followed by downward or upward penetration of cold or hot mantle material, respectively, through an avalanche process. The size of these mid-mantle plumes reaches 1500 km across with a radial velocity reaching 20 cm/yr near the seismic transition zone and plume heads exceeding 2500 km across. We will employ a deep-learning algorithm to formulate this challenge as a classification problem where modelling/computation aids in the learning stage for detecting the particular patterns.The parameters based on which the convection models are developed are poorly constrained. There are uncertainties in initial conditions, heterogeneities and boundary conditions in the simulations, which are nonlinear. Thus it is difficult to reconstruct the past configuration over long time scales. In order to extract information and better understand the parameters in mantle convection, we employ deep learning algorithm to search for different

Superfund Removal Site Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of CERCLA (Superfund) Removal sites. CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act)...

Points of Economic and Innovative Growth: a Model for Organizing the Effective Functioning of the Region

Directory of Open Access Journals (Sweden)

D. D. Burkaltseva

2017-01-01

Full Text Available Abstract Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: the methodological basis of research in the article is the dialectical method of scientific cognition, the systemic and institutional approach to studying and building an organization for the effective functioning of the regional economy in order to ensure its economic security from internal and external threats. Results: the existing mechanism of interaction "business and power" is considered. The financial stability of economic entities of the Republic of Crimea is determined. The financial independence of the regional budget of the Republic of Crimea has been determined. The dynamics of financing of the Federal Target Program "Social and Economic Development of the Republic of Crimea and Sevastopol until 2020" has been revealed. The regional and municipal restrictions of internal and external nature, which constitute a threat to social and economic development, are indicated. Points of economic and innovative growth at the present stage and their advantages and stages of technical organization of their implementation have been determined. A conceptual model of building effective interaction between subjects of the "business-power" system is proposed taking into account the influence of institutional factors. The conceptual model of organization of effective functioning of points of economic and innovative growth of the region, as a territorial socio-economic system, under modern conditions is constructed. Conclusions and Relevance: we propose to define four

Railway optimal network simulation for the development of regional transport-logistics system

Directory of Open Access Journals (Sweden)

Mikhail Borisovich Petrov

2013-12-01

Full Text Available The dependence of logistics on mineral fuel is a stable tendency of regions development, though when making strategic plans of logistics in the regions, it is necessary to provide the alternative possibilities of power-supply sources change together with population density, transport infrastructure peculiarities, and demographic changes forecast. On the example of timber processing complex of the Sverdlovsk region, the authors suggest the algorithm of decision of the optimal logistics infrastructure allocation. The problem of regional railway network organization at the stage of slow transition from the prolonged stagnation to the new development is carried out. The transport networks’ configurations of countries on the Pacific Rim, which successfully developed nowadays, are analyzed. The authors offer some results of regional transport network simulation on the basis of artificial intelligence method. These methods let to solve the task with incomplete data. The ways of the transport network improvement in the Sverdlovsk region are offered.

Localized Oscillatory Energy Conversion in Magnetopause Reconnection

Science.gov (United States)

Burch, J. L.; Ergun, R. E.; Cassak, P. A.; Webster, J. M.; Torbert, R. B.; Giles, B. L.; Dorelli, J. C.; Rager, A. C.; Hwang, K.-J.; Phan, T. D.; Genestreti, K. J.; Allen, R. C.; Chen, L.-J.; Wang, S.; Gershman, D.; Le Contel, O.; Russell, C. T.; Strangeway, R. J.; Wilder, F. D.; Graham, D. B.; Hesse, M.; Drake, J. F.; Swisdak, M.; Price, L. M.; Shay, M. A.; Lindqvist, P.-A.; Pollock, C. J.; Denton, R. E.; Newman, D. L.

2018-02-01

Data from the NASA Magnetospheric Multiscale mission are used to investigate asymmetric magnetic reconnection at the dayside boundary between the Earth's magnetosphere and the solar wind. High-resolution measurements of plasmas and fields are used to identify highly localized ( 15 electron Debye lengths) standing wave structures with large electric field amplitudes (up to 100 mV/m). These wave structures are associated with spatially oscillatory energy conversion, which appears as alternatingly positive and negative values of J · E. For small guide magnetic fields the wave structures occur in the electron stagnation region at the magnetosphere edge of the electron diffusion region. For larger guide fields the structures also occur near the reconnection X-line. This difference is explained in terms of channels for the out-of-plane current (agyrotropic electrons at the stagnation point and guide field-aligned electrons at the X-line).

EPA Region 1 Environmentally Sensitive Areas (Points)

Data.gov (United States)

U.S. Environmental Protection Agency — This coverage represents point equivalents of environmentally sensitive areas in EPA New England. This coverage represents polygon equivalents of environmentally...

Bright point study

International Nuclear Information System (INIS)

Tang, F.; Harvey, K.; Bruner, M.; Kent, B.; Antonucci, E.

1982-01-01

Transition region and coronal observations of bright points by instruments aboard the Solar Maximum Mission and high resolution photospheric magnetograph observations on September 11, 1980 are presented. A total of 31 bipolar ephemeral regions were found in the photosphere from birth in 9.3 hours of combined magnetograph observations from three observatories. Two of the three ephemeral regions present in the field of view of the Ultraviolet Spectrometer-Polarimeter were observed in the C IV 1548 line. The unobserved ephemeral region was determined to be the shortest-lived (2.5 hr) and lowest in magnetic flux density (13G) of the three regions. The Flat Crystal Spectrometer observed only low level signals in the O VIII 18.969 A line, which were not statistically significant to be positively identified with any of the 16 ephemeral regions detected in the photosphere. In addition, the data indicate that at any given time there lacked a one-to-one correspondence between observable bright points and photospheric ephemeral regions, while more ephemeral regions were observed than their counterparts in the transition region and the corona

Diagnosing the Stagnation Conditions of MagLIF Implosions Using Co and Kr dopants

Science.gov (United States)

Harding, E. C.; Hansen, S. B.; Harvey-Thompson, A. J.; Weis, M. R.; Hahn, K. D.; Gomez, M. R.; Knapp, P. F.; Slutz, S. A.; Geissel, M.; Ampleford, D. J.; Jennings, C. A.; Peterson, K.; Rochau, G. A.; Doron, R.; Stambulchik, E.; Nedostup, O.; Maron, Y.; Golovkin, I.

2017-10-01

Recent experiments on the Z-machine tested several new diagnostic techniques for investigating the stagnation conditions and the origins of the mix present in a Magnetized Liner Inertial Fusion (MagLIF) target. For the first time we have collected K-shell spectra from a low-concentration, Kr dopant placed in the gaseous D2 fuel. In addition, thin Co coatings were strategically applied to three different internal surfaces of the target in order to assess which surfaces actively contribute to the contamination of the fuel. Both imaging spectroscopy and narrow-band crystal imaging were used to identify the location of He-like Co ions. The Te and ne of the Co is inferred by fitting the He-alpha lines and the near-by Li-like satellites. The experimental measurements and the challenges associated with the analysis will be discussed. Sandia Natl Lab is a multi-mission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. DOE NNSA under contract DE-NA-0003525.

New Stagnation Arc Jet Model Design for Testing ADEPT 3-D Carbon Cloth

Science.gov (United States)

Beck, R.; Chen, Y.-K.; Wercinski, P.; Agrawal, P.; Chavez-Garcia, J.

2017-01-01

The ADEPT concept has been considered as an entry, descent and landing system to enable Human Mars class missions. Ground rules for the Mars studies required aerocapture, orbit, and then entry. The design utilizes a 3-D woven carbon cloth fabric as both heatshield and primary structure and design guidelines required 6 layers remaining after all entry events. The peak heating predicted for the ADEPT carbon cloth was 35 Wcm2 and resulting temperatures were predicted to be 1400K. Predictions for carbon mass loss were performed using equilibrium thermochemistry, which is only accurate for T2000K. Carbon oxidation is kinetically controlled at T2000K, and mass loss drops off considerably from equilibrium values. Design of the cloth thickness and mass would be significantly reduced if kinetics were considered. This effort was to design a stagnation test article design that could be used in the AHF with varying levels of oxygen where the results could be used to develop an engineering model to describe the recession rate of the carbon as a function of the partial pressure of monotomic oxygen.

Point Climat no. 21 'Regional wind power plans: is there enough wind to reach the Grenelle wind power targets?'

International Nuclear Information System (INIS)

Bordier, Cecile; Charentenay, Jeremie de

2012-01-01

Among the publications of CDC Climat Research, 'Climate Briefs' presents, in a few pages, hot topics in climate change policy. This issue addresses the following points: Regional wind power plans assess the wind power development potential of every French region. The aggregate regional potential largely exceeds national targets for 2020. However, achieving these targets is still far from guaranteed: the forecasted potential is theoretical, and the issues involved in implementing wind power projects on the ground will likely reduce this potential

Effect of price and in-store promotion on sales: a study of distinct regions in an emerging market

OpenAIRE

Sanchez, Juan Machado

2016-01-01

Increasing competition caused by globalization, high growth of some emerging markets and stagnation of developed economies motivate Consumer Packaged Goods (CPGs) manufacturers to drive their attention to emerging markets. These companies are expected to adapt their marketing activities to the particularities of these markets in order to succeed. In a country classified as emerging market, regions are not alike and some contrasts can be identified. In addition, divergences of marketing variab...

Stagnation point flow and heat transfer for a viscoelastic fluid ...

Indian Academy of Sciences (India)

M REZA

2017-11-09

Nov 9, 2017 ... MS received 15 August 2016; revised 26 February 2017; accepted 15 March 2017; published online 9 ... surface has several engineering applications within, for ... viscoelastic fluids in several industrial manufacturing pro-.

Shifting production trends point to more oil from OPEC

International Nuclear Information System (INIS)

Ismail, I.A.H.

1994-01-01

Oil production from the Organization of Petroleum Exporting Countries and non-OPEC regions has undergone four major phases of change in relation to oil price since 1960. Patterns visible in those phases offer an indication of world-wide production trends in the future. These four phases are described. Overall, demand for oil during 1960--93 has increased from around 20 million b/d in 1960 to as high as 65 million b/d in 1993. The consensus among energy analysts and forecasters is that this demand growth will continue. This will encourage OPEC and non OPEC producers to invest in the oil industry to meet future demand growth. However, since the resource base is larger in OPEC than in non-OPEC areas, and since the cost of developing these resources is lower in OPEC than outside OPEC, the future call on OPEC oil to meet growth in demand will undoubtedly be substantiated as production from the non-OPEC region diminishes or at best stagnates. The paper discusses OPEC production trends, non-OPEC production, natural gas liquids, future production scenarios, and future constraints on production

Construction and analysis of compressible flow calculation algorithms

International Nuclear Information System (INIS)

Desideri, Jean-Antoine

1993-01-01

The aim of this study is to give a theoretical rationale of a 'paradox' related to the behavior at the stagnation point of some numerical solutions obtained by conventional methods for Eulerian non-equilibrium flows. This 'paradox' concerns the relationship between the solutions given by equilibrium and non-equilibrium models and was raised by several experts during the 'Workshop on Hypersonic Flows for Reentry Problems, Part 1. Antibes 1990'. In the first part, we show that equilibrium conditions are reached at the stagnation point and we analyse the sensitivity of these equilibrium conditions to the flow variables. In the second part, we develop an analysis of the behavior of the mathematical solution to an Eulerian non-equilibrium flow in the vicinity of the stagnation point, which gives an explanation to the described 'paradox'. Then, a numerical procedure, integrating the species convection equations projected on the stagnation point streamline in a Lagrangian time approach, gives a numerical support to the theoretical predictions. We also propose two numerical integration procedures, that allow us to recompute, starting from the equilibrium conditions at the stagnation point, the flow characteristics at the body. The validity limits of these procedures are discussed and the results obtained for a Workshop test-case are compared with the results given by several contributors. Finally, we survey briefly the influence of the local behavior of the solution on the coupling technique to a boundary layer calculation. (author) [fr

Sports participation, physical activity, and health in the European regions.

Science.gov (United States)

Lera-López, Fernando; Marco, Rocio

2018-08-01

In a context of stagnation of the level of health-enhancing physical activity in Europe, this study examines the geographical stratification of sports participation and physical activity (PA) at the regional level in 28 European countries. While previous research has focused on the national approach, this study considers the regional level across 208 European regions. Individual survey data from the Eurobarometer 80.2 is combined with a regional-level approach to the 208 regions to quantify sports participation and PA at the regional level. The results show important differences and a geographical stratification of sports participation and PA among the European regions, albeit following different patterns. In particular, a north-south gap is identified in terms of PA rates and an east-west gap is detected in terms of sports participation levels. Applying the cluster technique, a taxonomy of four different European regions is developed considering both types of indicators. Finally, the existence of sports spatial spillovers among regions is verified, obtaining a positive autocorrelation among neighbouring regions for being involved in PA and sporting activities. The results may have significant implications in terms of policy measures to improve health through PA and sports participation at the regional level in Europe.

Regional control of Drosophila gut stem cell proliferation: EGF establishes GSSC proliferative set point & controls emergence from quiescence.

Science.gov (United States)

Strand, Marie; Micchelli, Craig A

2013-01-01

Adult stem cells vary widely in their rates of proliferation. Some stem cells are constitutively active, while others divide only in response to injury. The mechanism controlling this differential proliferative set point is not well understood. The anterior-posterior (A/P) axis of the adult Drosophila midgut has a segmental organization, displaying physiological compartmentalization and region-specific epithelia. These distinct midgut regions are maintained by defined stem cell populations with unique division schedules, providing an excellent experimental model with which to investigate this question. Here, we focus on the quiescent gastric stem cells (GSSCs) of the acidic copper cell region (CCR), which exhibit the greatest period of latency between divisions of all characterized gut stem cells, to define the molecular basis of differential stem cell activity. Our molecular genetic analysis demonstrates that the mitogenic EGF signaling pathway is a limiting factor controlling GSSC proliferation. We find that under baseline conditions, when GSSCs are largely quiescent, the lowest levels of EGF ligands in the midgut are found in the CCR. However, acute epithelial injury by enteric pathogens leads to an increase in EGF ligand expression in the CCR and rapid expansion of the GSSC lineage. Thus, the unique proliferative set points for gut stem cells residing in physiologically distinct compartments are governed by regional control of niche signals along the A/P axis.

Regional control of Drosophila gut stem cell proliferation: EGF establishes GSSC proliferative set point & controls emergence from quiescence.

Directory of Open Access Journals (Sweden)

Marie Strand

Full Text Available Adult stem cells vary widely in their rates of proliferation. Some stem cells are constitutively active, while others divide only in response to injury. The mechanism controlling this differential proliferative set point is not well understood. The anterior-posterior (A/P axis of the adult Drosophila midgut has a segmental organization, displaying physiological compartmentalization and region-specific epithelia. These distinct midgut regions are maintained by defined stem cell populations with unique division schedules, providing an excellent experimental model with which to investigate this question. Here, we focus on the quiescent gastric stem cells (GSSCs of the acidic copper cell region (CCR, which exhibit the greatest period of latency between divisions of all characterized gut stem cells, to define the molecular basis of differential stem cell activity. Our molecular genetic analysis demonstrates that the mitogenic EGF signaling pathway is a limiting factor controlling GSSC proliferation. We find that under baseline conditions, when GSSCs are largely quiescent, the lowest levels of EGF ligands in the midgut are found in the CCR. However, acute epithelial injury by enteric pathogens leads to an increase in EGF ligand expression in the CCR and rapid expansion of the GSSC lineage. Thus, the unique proliferative set points for gut stem cells residing in physiologically distinct compartments are governed by regional control of niche signals along the A/P axis.

AN IN-DEPTH VIEW OF THE MID-INFRARED PROPERTIES OF POINT SOURCES AND THE DIFFUSE ISM IN THE SMC GIANT H II REGION, N66

International Nuclear Information System (INIS)

Whelan, David G.; Johnson, Kelsey E.; Indebetouw, Rémy; Lebouteiller, Vianney; Galliano, Frédéric; Peeters, Els; Bernard-Salas, Jeronimo; Brandl, Bernhard R.

2013-01-01

The focus of this work is to study mid-infrared point sources and the diffuse interstellar medium (ISM) in the low-metallicity (∼0.2 Z ☉ ) giant H II region N66 in order to determine properties that may shed light on star formation in these conditions. Using the Spitzer Space Telescope's Infrared Spectrograph, we study polycyclic aromatic hydrocarbon (PAH), dust continuum, silicate, and ionic line emission from 14 targeted infrared point sources as well as spectra of the diffuse ISM that is representative of both the photodissociation regions (PDRs) and the H II regions. Among the point source spectra, we spectroscopically confirm that the brightest mid-infrared point source is a massive embedded young stellar object, we detect silicates in emission associated with two young stellar clusters, and we see spectral features of a known B[e] star that are commonly associated with Herbig Be stars. In the diffuse ISM, we provide additional evidence that the very small grain population is being photodestroyed in the hard radiation field. The 11.3 μm PAH complex emission exhibits an unexplained centroid shift in both the point source and ISM spectra that should be investigated at higher signal-to-noise and resolution. Unlike studies of other regions, the 6.2 μm and 7.7 μm band fluxes are decoupled; the data points cover a large range of I 7.7 /I 11.3 PAH ratio values within a narrow band of I 6.2 /I 11.3 ratio values. Furthermore, there is a spread in PAH ionization, being more neutral in the dense PDR where the radiation field is relatively soft, but ionized in the diffuse ISM/PDR. By contrast, the PAH size distribution appears to be independent of local ionization state. Important to unresolved studies of extragalactic low-metallicity star-forming regions, we find that emission from the infrared-bright point sources accounts for only 20%-35% of the PAH emission from the entire region. These results make a comparative data set to other star-forming regions with

Inverse electrocardiographic transformations: dependence on the number of epicardial regions and body surface data points.

Science.gov (United States)

Johnston, P R; Walker, S J; Hyttinen, J A; Kilpatrick, D

1994-04-01

The inverse problem of electrocardiography, the computation of epicardial potentials from body surface potentials, is influenced by the desired resolution on the epicardium, the number of recording points on the body surface, and the method of limiting the inversion process. To examine the role of these variables in the computation of the inverse transform, Tikhonov's zero-order regularization and singular value decomposition (SVD) have been used to invert the forward transfer matrix. The inverses have been compared in a data-independent manner using the resolution and the noise amplification as endpoints. Sets of 32, 50, 192, and 384 leads were chosen as sets of body surface data, and 26, 50, 74, and 98 regions were chosen to represent the epicardium. The resolution and noise were both improved by using a greater number of electrodes on the body surface. When 60% of the singular values are retained, the results show a trade-off between noise and resolution, with typical maximal epicardial noise levels of less than 0.5% of maximum epicardial potentials for 26 epicardial regions, 2.5% for 50 epicardial regions, 7.5% for 74 epicardial regions, and 50% for 98 epicardial regions. As the number of epicardial regions is increased, the regularization technique effectively fixes the noise amplification but markedly decreases the resolution, whereas SVD results in an increase in noise and a moderate decrease in resolution. Overall the regularization technique performs slightly better than SVD in the noise-resolution relationship. There is a region at the posterior of the heart that was poorly resolved regardless of the number of regions chosen. The variance of the resolution was such as to suggest the use of variable-size epicardial regions based on the resolution.

2-D simulations of the implosion, collapse and stagnation of laser fusion shells

International Nuclear Information System (INIS)

Atzeni, S.; Guerrieri, A.

1989-01-01

We discuss the method, model and first results of 2-D numerical simulations of the entire history of gas-filled shells irradiated by laser pulses with long wavelength non-uniformities. Although this issue has already been addressed in connection with the design of reactor targets, or with the interpretation of experimental results, a complete, clear, and quantitative picture of the relevant phenomenology is still missing. In general, the history of a target can be divided into three phases, namely, the acceleration and inertial phase of the implosion (I;t≤t 0 ), the shock collapse and reflection (II,t 0 ≤t≤t ' 0 ) and the stagnation (t ' 0 ≤t≤t 1 ). In a previous study, we were able to study quantitatively phase I and to get some qualitative information on phase II. At t≅t 0 , however, negative area zones occurred in the mesh of our purely Lagrangian code, and the simulations became unreliable. We have now upgraded our code, by introducing an automatic mesh-rezoning package, which allows us to follow with reasonable accuracy phase II and III of the target implosion. (author) 9 refs., 6 figs

Single point mutations distributed in 10 soluble and membrane regions of the Nicotiana plumbaginifolia plasma membrane PMA2 H+-ATPase activate the enzyme and modify the structure of the C-terminal region.

Science.gov (United States)

Morsomme, P; Dambly, S; Maudoux, O; Boutry, M

1998-12-25

The Nicotiana plumbaginifolia pma2 (plasma membrane H+-ATPase) gene is capable of functionally replacing the H+-ATPase genes of the yeast Saccharomyces cerevisiae, provided that the external pH is kept above 5.0. Single point mutations within the pma2 gene were previously identified that improved H+-ATPase activity and allowed yeast growth at pH 4.0. The aim of the present study was to identify most of the PMA2 positions, the mutation of which would lead to improved growth and to determine whether all these mutations result in similar enzymatic and structural modifications. We selected additional mutants in total 42 distinct point mutations localized in 30 codons. They were distributed in 10 soluble and membrane regions of the enzyme. Most mutant PMA2 H+-ATPases were characterized by a higher specific activity, lower inhibition by ADP, and lower stimulation by lysophosphatidylcholine than wild-type PMA2. The mutants thus seem to be constitutively activated. Partial tryptic digestion and immunodetection showed that the PMA2 mutants had a conformational change making the C-terminal region more accessible. These data therefore support the hypothesis that point mutations in various H+-ATPase parts displace the inhibitory C-terminal region, resulting in enzyme activation. The high density of mutations within the first half of the C-terminal region suggests that this part is involved in the interaction between the inhibitory C-terminal region and the rest of the enzyme.

To compare the efficacy of two kinds of Zhizhu pills in the treatment of functional dyspepsia of spleen-deficiency and qi-stagnation syndrome:a randomized group sequential comparative trial

Science.gov (United States)

2011-01-01

Background In Traditional Chinese Medicine (TCM) theory, functional dyspepsia (FD) can be divided into different syndromes according to different clinical symptoms and signs, and the most common one is spleen-deficiency and qi-stagnation syndrome that can be treated by Chinese traditional patent medicine ---- two kinds of Zhizhu pills, between which the primary difference in ingredients is that one contains immature orange fruit of Citrus aurantium L.(IFCA) and the other contains that of Citrus sinensis Osbeck (IFCS). The trial's objective was to compare the efficacy of two kinds of Zhizhu pills on symptom changes in patients with FD of spleen-deficiency and qi-stagnation syndrome. Methods A randomized, group sequential, double-blinded, multicenter trial was conducted in patients with FD of spleen-deficiency and qi-stagnation syndrome at 3 hospitals in Beijing between June 2003 and May 2005. Participants were randomly allocated into two groups (IFCA group and IFCS group) in a 1:1 ratio, and respectively took one of the two kinds of Zhizhu pills orally, 6 g each time, 3 times a day, for 4 weeks. Statistical analysis was performed with use of a group sequential method, the triangular test (TT). Results A total of 163 patients were randomized, and 3 patients were excluded from analysis because of early dropouts, leaving 160 patients (IFCA group: n = 82; IFCS group: n = 78) for statistical analysis. Three interim analyses were done after 62, 116, and 160 patients had completed their 4-week treatment, respectively. At the third interim analysis, the sample path crossed the upper boundary and the trial was stopped, the cure-markedly effective rates were 45% for IFCS group and 67% for IFCA group, respectively, the one-sided p-value was 0.0036, the median unbiased estimate of the odds ratio (OR) for the benefit of IFCA relative to IFCS was 2.91 with 95%CI: 1.40 to 6.06. No adverse events were observed in the two groups. Conclusions Zhizhu pills containing IFCA was superior

The role of tourism public-private partnerships in regional development: a conceptual model proposal

Directory of Open Access Journals (Sweden)

Mário Franco

Full Text Available Tourism is characterized as being a sector that stands out as one of the business activities with the greatest potential for worldwide expansion, and as an engine for economic growth. If at the national level, the appeal of tourism is significant, on the local level this sector presents itself as an essential tool in regional development, as a means to avoid regional desertification and stagnation, stimulating the potential of more undeveloped regions. In such a competitive sector as tourism, companies should develop synergies and achieve competitive advantage. In this context, public-private partnerships play an important role in regional development. The aim of this paper is to present a theoretical context that combines different concepts and elements to explain and understand the public-private partnership phenomenon in tourism. A conceptual model of the role of public-private partnerships will be proposed in order to contribute to successful regional development.

ERO and PIC simulations of gross and net erosion of tungsten in the outer strike-point region of ASDEX Upgrade

Directory of Open Access Journals (Sweden)

A. Hakola

2017-08-01

Full Text Available We have modelled net and gross erosion of W in low-density l-mode plasmas in the low-field side strike point region of ASDEX Upgrade by ERO and Particle-in-Cell (PIC simulations. The observed net-erosion peak at the strike point was mainly due to the light impurities present in the plasma while the noticeable net-deposition regions surrounding the erosion maximum could be attributed to the strong E ×B drift and the magnetic field bringing eroded particles from a distance of several meters towards the private flux region. Our results also imply that the role of cross-field diffusion is very small in the studied plasmas. The simulations indicate net/gross erosion ratio of 0.2–0.6, which is in line with the literature data and what was determined spectroscopically. The deviations from the estimates extracted from post-exposure ion-beam-analysis data (∼0.6–0.7 are most likely due to the measured re-deposition patterns showing the outcomes of multiple erosion-deposition cycles.

The effects of stroke length and Reynolds number on heat transfer to a ducted confined and semi-confined synthetic air jet

International Nuclear Information System (INIS)

Rylatt, D I; O'Donovan, T S

2014-01-01

Heat transfer to three configurations of ducted jet and un-ducted semiconfined jets is investigated experimentally. The influence of the jet operating parameters, stroke length (L 0 /D) and Reynolds (Re) number on the heat transferred to the jet is of particular interest. Heat transfer distributions to the jet are reported at H/D = 1 for a range of experimental parameters Re (1000 to 4000) and L 0 /D (5 to 20). Secondary and tertiary peaks are discernable in the heat transfer distributions across the range of parameters tested. It is shown that for a fixed Re varying the L 0 /D has little effect on the magnitude of the stagnation region heat transfer but does effect the position and magnitude of the secondary and tertiary peaks in the heat transfer distribution. It is also shown that for a fixed L 0 /D increasing the Re has a significant effect on the magnitude of the stagnation region heat transfer but has little impact on the position of the secondary and tertiary peaks in the heat transfer distributions. Ducting is added to the configuration to improve heat transfer by drawing cold air from a remote location into the jet flow. Ducting is shown to increase stagnation region and area averaged heat transfer across the range of jet parameters tested when compared with an un-ducted jets of equal confinement. Increasing the stroke length from L 0 /D = 5 to 20 for a Reynolds number of 2000 reduces the enhancement in stagnation region heat transfer provided by the ducting from 35% to 10%; the area averaged heat transfer provided by the ducting also changes from a 42% to a 21% enhancement. This is shown to be partly due to relative magnitude of the peaks in heat transfer outwith the stagnation region; at low stroke lengths, the difference in the magnitude of these peaks is large and reduces with increasing L 0 /D. It is also shown that as L 0 /D is increased the stagnation region heat transfer to the un-ducted jets increases while for the ducted jets stagnation region

S-to-P Conversions from Mid-mantle Slow Scatterers in Slab Regions: Observations of Deep/Stagnated Oceanic Crust?

Science.gov (United States)

He, Xiaobo; Zheng, Yixian

2018-02-01

The fate of a subducted slab is a key ingredient in the context of plate tectonics, yet it remains enigmatic especially in terms of its crustal component. In this study, our efforts are devoted to resolve slab-related structures in the mid-mantle below eastern Indonesia, the Izu-Bonin region, and the Peru area by employing seismic array analysing techniques on high-frequency waveform data from F-net in Japan and the Alaska regional network and the USArray in North America. A pronounced arrival after the direct P wave is observed in the recordings of four deep earthquakes (depths greater than 400 km) from three subduction systems including the Philippines, the Izu-Bonin, and the Peru. This later arrival displays a slightly lower slowness compared to the direct P wave and its back-azimuth deviates somewhat from the great-circle direction. We explain it as an S-to-P conversion at a deep scatterer below the sources in the source region. In total, five scatterers are seen at depths ranging from 930 to 1500 km. Those scatterers appear to be characterised by an 7 km-thick low-velocity layer compared to the ambient mantle. Combined evidence from published mineral physical analysis suggests that past subducted oceanic crust, possibly fragmented, is most likely responsible for these thin-layer compositional heterogeneities trapped in the mid-mantle beneath the study regions. Our observations give a clue to the potential fate of subducted oceanic crust.

Address Points, MFRDC has address points for all municipalities in Dooly, Crisp, Macon, Taylor, Schley, Marion and Webster counties and for the counties as well., Published in 2008, 1:1200 (1in=100ft) scale, Middle Flint Regional Development Commission.

Data.gov (United States)

NSGIC Regional | GIS Inventory — Address Points dataset current as of 2008. MFRDC has address points for all municipalities in Dooly, Crisp, Macon, Taylor, Schley, Marion and Webster counties and...

Active Pesticide Production Points, Region 9, 2013, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This data layer represents Active Pesticide Producing Establishments in USEPA Region 9 (AZ, CA, HI and NV) that reported production for the year 2013. Pesticide...

“Fear or Love Thy Neighbour”? The EU Framework for Promoting Regional Cooperation in the South Caucasus

Directory of Open Access Journals (Sweden)

Nelli Babayan

2011-12-01

Full Text Available Building on the model of the enlargement policy, the European Union (EU designed the European Neighbourhood Policy and the Eastern Partnership to further promote its norms and principles. One of the goals of its new policies has been to foster regional cooperation among partner countries and their neighbours. This article specifies the EU’s framework for promoting regional cooperation through the aforementioned policies and discusses its potential impact on the example of the South Caucasus republics of Armenia, Azerbaijan, and Georgia. The South Caucasus has not only been an arena of intraregional conflicts, but has also often been troubled by disputes between its neighbours. This article argues that, due to a lack of proactive and consistent engagement, the EU’s framework risks leaving regional conflicts in the current state of stagnation and without advancement in regional cooperation.

Oxidation of iridium coating on rhenium coated graphite at elevated temperature in stagnated air

International Nuclear Information System (INIS)

Huang, Yongle; Bai, Shuxin; Zhang, Hong; Ye, Yicong

2015-01-01

Highlights: • Continuous and dense Ir coatings were prepared on graphite by electrodepostion. • The purification of the as-prepared Ir coating was higher than about 99.98%. • The Ir/Re/C specimen kept integrity without significant failures after oxidation. • The average oxidation rate of the Ir coating was about 0.219 mg/(cm 2 min). • Penetrating holes at gains boundaries resulted in the failure of the Ir coating. - Abstract: Continuous and dense iridium coatings were prepared on the rhenium coated graphite specimens by electrodeposition. The iridium/rhenium coated graphite (Ir/Re/C) specimens were oxidized at elevated temperatures in stagnated air for 3600 s. The purification of the as-prepared Ir coating was higher than about 99.98% with the main impurity elements Si, Al, Fe and Ru. After oxidation, the Ir/Re/C specimens kept integrity without significant failures and the average oxidation rate was about 0.219 mg/(cm 2 min). Pores were found at the grain boundaries and concentrated to penetrating holes with the growth of Ir grains, which resulted in disastrous failures of the Ir coating

Oxidation of iridium coating on rhenium coated graphite at elevated temperature in stagnated air

Energy Technology Data Exchange (ETDEWEB)

Huang, Yongle; Bai, Shuxin, E-mail: NUDT_MSE_501@163.com; Zhang, Hong; Ye, Yicong

2015-02-15

Highlights: • Continuous and dense Ir coatings were prepared on graphite by electrodepostion. • The purification of the as-prepared Ir coating was higher than about 99.98%. • The Ir/Re/C specimen kept integrity without significant failures after oxidation. • The average oxidation rate of the Ir coating was about 0.219 mg/(cm{sup 2} min). • Penetrating holes at gains boundaries resulted in the failure of the Ir coating. - Abstract: Continuous and dense iridium coatings were prepared on the rhenium coated graphite specimens by electrodeposition. The iridium/rhenium coated graphite (Ir/Re/C) specimens were oxidized at elevated temperatures in stagnated air for 3600 s. The purification of the as-prepared Ir coating was higher than about 99.98% with the main impurity elements Si, Al, Fe and Ru. After oxidation, the Ir/Re/C specimens kept integrity without significant failures and the average oxidation rate was about 0.219 mg/(cm{sup 2} min). Pores were found at the grain boundaries and concentrated to penetrating holes with the growth of Ir grains, which resulted in disastrous failures of the Ir coating.

Impedance spectroscopy and structural properties of the perovskite-like Sn(Ba,Sr)O3 stagnate

International Nuclear Information System (INIS)

Cuervo Farfán, J.; Olaya, J.J.; Vera López, E.; Landínez Téllez, D.A.; Roa-Rojas, J.

2012-01-01

An exhaustive study of structural, electrical and transport properties on the perovskite stagnate Sn(Ba,Sr)O 3 was performed. Samples of SnBa 1-x Sr x O 3 with 0≤x≤1.00 were prepared by the solid state reaction method. The crystallographic structure was studied by X-ray diffraction experiments and Rietveld refinement using the GSAS code. Results reveal the material synthesized in a cubic structure (space group Pm3-bar m, no. 221) for 0≤x≤0.50 and in an orthorhombic (space group Pnma, no. 62) for x>0.50. The approximate grain size was found from experiments' Scanning Electron Microscopy. The electric response was studied by the Impedance Spectroscopy technique from 10.0 mHz up to 0,10 MHz. Electric polarization measurements for SnSrO 3 and SnBaO 3 were determined through curves of polarization as a function of applied electric field, which reveal the ferroelectric character of the material. From the saturation polarization the dielectric constants of materials were calculated.

Microstructure of the regions on a plane copper electrode surface affected by a spark discharge in air in the point-plane gap

Science.gov (United States)

Tren'kin, A. A.; Karelin, V. I.; Shibitov, Yu. M.; Blinova, O. M.; Yasnikov, I. S.

2017-09-01

The microstructure of the regions affected by spark discharge on the surface of a plane copper electrode in atmospheric air in the point-plane gap has been studied using a scanning electron microscope for both the positive and negative polarity of the point electrode. It has been found that the affected regions have the shape of round spots or groups of spots with diameters of individual spots varying in the range of 20-200 μm. It has been revealed that the spots have an internal spatial structure in the form of an aggregate of concentric rings. These rings are aggregates of a large number of microscopic craters with diameters of 0.1-1.0 μm.

Study on changes of hypothalamus-pituitary-target axis hormones in patients with insomnia of fire-symdrome due to the stagnation

International Nuclear Information System (INIS)

Chen Jianfei; Yan Songqin

2007-01-01

Objective: To study the changes of hypothalamus-pituitary-target axis hormones in patients with insomnia of fire-symdrom due to the stagnation of liver-qi. Methods: Serum thyrotropin-releasing hormone (TRH), thyroid stimulating hormone (TSH), growth hormone (GH), free thyroxine (FT 4 ), cortisol levels were measured with immunoradioassay (IMRA) and radioimmunoassay (RIA) in 30 patients with this type of insomnia and 30 controls. Results: The serum TSH levels were significantly lower and serum TRH, GH, cortisol FT 4 levels were significantly higher in the patients than those in controls (P<0.05 or P<0.01). Conclusion: This insomnia syndrome was closely related to the dysfunction of mpothalamus-pituitary-thyroid and adrenal axis. (authors)

Stabilization by Shear and Negative V''; Stabilisation au Moyen du Croisement de Lignes de Champ et de l'Emploi d'un V'' Negatif; Stabilizatsiya spomoshch'yu shira i otritsatel'nogo V{sup ;} Estabilizacion por Cizallamiento y Empleo de V'' Negativa

Energy Technology Data Exchange (ETDEWEB)

Furth, H. P.; Killeen, J. [Lawrence Radiation Laboratory, Livermore, CA (United States); Rosenbluth, M. N. [General Atomic Division, General Dynamics Corporation and University of California (San Diego), La Jolla, CA (United States); Coppi, B. [University of California (San Diego), La Jolla, CA (United States)

1966-04-15

A criterion is derived for the stability against gravitational interchange of toroidal systems by using the hydrodynamic equation with finite resistivity. The stability depends on an expression that reduces to the sign of the second derivative of the volume per unit flux (V'') in the case that the plasma does not surround any ''floating'' conductors. If this condition is violated, then a ''rapid'' resistive instability results. If the condition is satisfied, then both the resistive growth rate and the critical {beta} against ''ballooning'' modes depend on a figure of merit rR{sub c}/L{sup 2} where r is plasma radius, L is length along field lines between ''good'' and ''bad'' regions, Re the mean radius of curvature and {gamma} is a shape factor depending on the design. A similar consideration applies to ''kinking'' modes. Using the results of numerical calculations, we will discuss the structure, stability properties and figure of merit of several ''stagnation-point'' solutions having the negative-V'' property. The principle here is to create directions of favorable {Delta}B, then cause the rotational transform to be weakened in the favorable regions (reaching a null at the stagnation point). The negative contributions to V'' are then weighted heavily, becoming infinite at the stagnation point. We consider three types of solution: (1) Linear periodic-multipole arrays, by using helical Script-Small-L = 2 and 4, or Script-Small-L = 3 ''shaping fields'' with natural stagnation points; and by superimposing Script-Small-L = 0 and 2, Script-Small-L = 1 and 3, or Script-Small-L = 0 and 3 ''corrugating fields'', to create favorable {Delta}B regions. (2) Helical equilibria, by using gross helical curvature to create the favorable VB regions and stagnating the rotational transform by means of a current on an axial conductor, around which the helical equilibrium flux-tube is wound. (3) Toroidal equilibria, by using the gross toroidal curvature to create the favorable {Delta

Life Disparity before, during and after Stagnation of Danish Female Life Expectancy. a Cause of Death Analysis and a Comparison with Their Scandinavian Counterparts

DEFF Research Database (Denmark)

Aburto, José Manuel; Wensink, Maarten Jan; Lindahl-Jacobsen, Rune

that as Norway increasingly came to resemble Sweden in terms of high life expectancy, it also came to resemble Sweden in terms of low lifespan inequality. Next, we aim to make similar decompositions for Sweden and Norway, and aim to disentangle cohort effects from the question: what can Denmark do now...... cancers and non-infectious respiratory diseases, offsetting continuous improvement in cardiovascular mortality. Before and after stagnation, life expectancy increased as disparity decreased, as the cardiovascular revolution unfolded. Comparing Denmark and its Scandinavian counterparts, we find...

Influence of de qi on the immediate analgesic effect of SP6 acupuncture in patients with primary dysmenorrhoea and cold and dampness stagnation: a multicentre randomised controlled trial.

Science.gov (United States)

Zhao, Min-Yi; Zhang, Peng; Li, Jing; Wang, Lin-Peng; Zhou, Wei; Wang, Yan-Xia; She, Yan-Fen; Ma, Liang-Xiao; Wang, Pei; Hu, Ni-Juan; Lin, Chi; Hu, Shang-Qin; Wu, Gui-Wen; Wang, Ya-Feng; Sun, Jun-Jun; Jiang, Si-Zhu; Zhu, Jiang

2017-10-01

The aim of this multicentre randomised controlled trial was to investigate the contribution of de qi to the immediate analgesic effect of acupuncture in patients with primary dysmenorrhoea and the specific traditional Chinese medicine diagnosis cold and dampness stagnation . Eighty-eight patients with primary dysmenorrhoea and cold and dampness stagnation were randomly assigned to de qi (n=43) or no de qi (n=45) groups and underwent 30 min of SP6 acupuncture. The de qi group received deep needling at SP6 with manipulation using thick needles; the no de qi group received shallow needling with no manipulation using thin needles. In both groups the pain scores and actual de qi sensation were evaluated using a visual analogue scale for pain (VAS-P) and the acupuncture de qi clinical assessment scale (ADCAS), respectively. Both groups showed reductions in VAS-P, with no signficant differences between groups. ADCAS scores showed 43/43 and 25/45 patients in de qi and no de qi groups, respectively, actually experienced de qi sensation. Independent of original group allocation, VAS-P reductions associated with actual de qi (n=68) were greater than those without (28.4±18.19 mm vs 14.6±12.28 mm, p=0.008). This study showed no significant difference in VAS-P scores in patients with primary dysmenorrhoea and cold and dampness stagnation immediately after SP6 acupuncture designed to induce or avoid de qi sensation. Both treatments significantly reduced VAS-P relative to baseline. Irrespective of group allocation, patients experiencing actual de qi sensation demonstrated larger reductions in pain score relative to those without, suggesting greater analgesic effects. Chinese Clinical Trial Registry (ChiCTR-TRC-13003086); Results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The stagnation of the Mexican male life expectancy in the first decade of the 21st century: the impact of homicides and diabetes mellitus.

Science.gov (United States)

Canudas-Romo, Vladimir; García-Guerrero, Víctor Manuel; Echarri-Cánovas, Carlos Javier

2015-01-01

In the first decade of the 21st century, the Mexican life expectancy changed from a long trend of increase to stagnation. These changes concur with an increase in deaths by homicides that the country experienced in that decade, and an obesity epidemic that had developed over the last decades of the 20th century. We quantify the impact of causes of death on life expectancy from 2000 to 2010. Two approaches to analyse causes of death are used: the number of life years lost due to each of the causes of death in a given year, and cause-decomposition techniques for comparisons of life expectancy from 2000 to 2010. The apparent stagnation in life expectancy is the result of an increase in deaths by homicides and diabetes mellitus on the one hand, and the positive improvements observed in other causes of death on the other. The negative impact of homicides is particularly observed for ages 15 and 50, and for that of diabetes mellitus at ages above 45 years. There is little basis for optimism regarding the future scenarios of the health of the Mexican population based on the first decade of the 21st century. Male life expectancy would have increased by 2 years if deaths by homicides and diabetes mellitus had been avoided. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A extração da flora e fauna nativas na Amazônia brasileira – uma segunda apreciação

Directory of Open Access Journals (Sweden)

José Augusto Drummond

2016-04-01

Full Text Available Defines low technology extraction, practiced in many parts of the Brazilian Amazon region. Examines 16 recurrent analytical and conceptual topics present in academic and political discussions about that type of extraction. Evaluates several public policies, community initiatives, partnerships and other forms of support given to extractors. Points out in each topic the perspectives of prosperity, collapse, stagnation or continued existence of low technology extraction and of the people who practice and depend on it.

Side Flow Effect on Surface Generation in Nano Cutting.

Science.gov (United States)

Xu, Feifei; Fang, Fengzhou; Zhang, Xiaodong

2017-12-01

The side flow of material in nano cutting is one of the most important factors that deteriorate the machined surface quality. The effects of the crystallographic orientation, feed, and the cutting tool geometry, including tool edge radius, rake angle and inclination angle, on the side flow are investigated employing molecular dynamics simulation. The results show that the stagnation region is formed in front of tool edge and it is characterized by the stagnation radius R s and stagnation height h s . The side flow is formed because the material at or under the stagnation region is extruded by the tool edge to flow to the side of the tool edge. Higher stagnation height would increase the size of the side flow. The anisotropic nature of the material which partly determines the stagnation region also influences the side flow due to the different deformation mechanism under the action of the tool edge. At different cutting directions, the size of the side flow has a great difference which would finally affect the machined surface quality. The cutting directions of {100} , {110} , and {110}  are beneficial to obtain a better surface quality with small side flow. Besides that, the side flow could be suppressed by reducing the feed and optimizing the cutting tool geometry. Cutting tool with small edge radius, large positive rake angle, and inclination angle would decrease the side flow and consequently improve the machined surface quality.

Address Points, Address points were attributed according to NENA standards and field verfied between the dates of June 2008 thru August 2008. The address points were then matched to the Verizon Telco database with a 99% hit rate in October of 2008., Published in 2006, 1:1200 (1in=100ft) scale, Eastern Shore Regional GIS Cooperative.

Data.gov (United States)

NSGIC Regional | GIS Inventory — Address Points dataset current as of 2006. Address points were attributed according to NENA standards and field verfied between the dates of June 2008 thru August...

Imaging study on acupuncture points

Science.gov (United States)

Yan, X. H.; Zhang, X. Y.; Liu, C. L.; Dang, R. S.; Ando, M.; Sugiyama, H.; Chen, H. S.; Ding, G. H.

2009-09-01

The topographic structures of acupuncture points were investigated by using the synchrotron radiation based Dark Field Image (DFI) method. Four following acupuncture points were studied: Sanyinjiao, Neiguan, Zusanli and Tianshu. We have found that at acupuncture point regions there exists the accumulation of micro-vessels. The images taken in the surrounding tissue out of the acupuncture points do not show such kind of structure. It is the first time to reveal directly the specific structure of acupuncture points by X-ray imaging.

Imaging study on acupuncture points

International Nuclear Information System (INIS)

Yan, X H; Zhang, X Y; Liu, C L; Dang, R S; Ando, M; Sugiyama, H; Chen, H S; Ding, G H

2009-01-01

The topographic structures of acupuncture points were investigated by using the synchrotron radiation based Dark Field Image (DFI) method. Four following acupuncture points were studied: Sanyinjiao, Neiguan, Zusanli and Tianshu. We have found that at acupuncture point regions there exists the accumulation of micro-vessels. The images taken in the surrounding tissue out of the acupuncture points do not show such kind of structure. It is the first time to reveal directly the specific structure of acupuncture points by X-ray imaging.

REGIONAL DISPARITIES IN SLOVAK REPUBLIC AT NUTS 3 LEVEL FROM DIRECT FOREIGN INVESTMENTS POINT OF VIEW

Directory of Open Access Journals (Sweden)

Radoslav Koziak

2011-01-01

Full Text Available Slovak Republic, likewise other member states of the European Union, has beenexperiencing problems with the inter-regional differences for long time. These aremanifested in different forms (economic, social, environmental and others. Diversemacroeconomic regional indicators are used to express and quantificate the inter-regionaldifferences. Among traditionally used and by experts acknowledged quantities ofmeasurement of the inter-regional differences belong for example a gross domestic product(from diverse viewpoint and specification, labor market indicators, e.g. employment andunemployment rates, demographic development indicators, indicators assessingenvironment condition or standard of life, as well as the indicators quantifying theinvestments condition and development (domestic or foreign that flow into the objectterritory since we consider them an important factor and precondition of growth anddevelopment of the state as a whole, as well as its individual regions.The present contribution deals with an issue of the inter-regional differences formulationand measurement in the Slovak Republic on a NUTS 3 regions examination level (from anuniform system of the territorial units classification viewpoint, it means the autonomousdistricts (from a territorial-administrative order of Slovak Republic viewpoint, from directforeign investments‘ point of view.In the contribution there are theoretically defined basic concepts with which we operate,a specified methodological procedure for the inter-regional differences formulation andmeasurement, a direct foreign investments condition analysis from 1997 to 2007(development of the direct foreign investments during above period in all autonomousdistricts were subjected to a statistical examination as well as statistical testing that willreveal a convergence (meaning a moderation/decrease or a divergence (meaninga deepening of the inter-regional disparities on the NUTS 3 level. In addition to anabsolute

Impedance spectroscopy and structural properties of the perovskite-like Sn(Ba,Sr)O{sub 3} stagnate

Energy Technology Data Exchange (ETDEWEB)

Cuervo Farfan, J. [Grupo de Fisica de Nuevos Materiales, Departamento de Fisica, Universidad Nacional de Colombia, AA 5997, Bogota DC (Colombia); Ciencias Basicas, Universidad Manuela Beltran, Bogota DC (Colombia); Olaya, J.J. [Departamento de Ingenieria Mecanica y Mecatronica, Universidad Nacional de Colombia, Bogota DC (Colombia); Vera Lopez, E. [Grupo de Superficies, Electroquimica y Corrosion, Universidad Pedagogica y Tecnologica de Colombia, Tunja (Colombia); Landinez Tellez, D.A. [Grupo de Fisica de Nuevos Materiales, Departamento de Fisica, Universidad Nacional de Colombia, AA 5997, Bogota DC (Colombia); Roa-Rojas, J., E-mail: jroar@unal.edu.co [Grupo de Fisica de Nuevos Materiales, Departamento de Fisica, Universidad Nacional de Colombia, AA 5997, Bogota DC (Colombia)

2012-08-15

An exhaustive study of structural, electrical and transport properties on the perovskite stagnate Sn(Ba,Sr)O{sub 3} was performed. Samples of SnBa{sub 1-x}Sr{sub x}O{sub 3} with 0{<=}x{<=}1.00 were prepared by the solid state reaction method. The crystallographic structure was studied by X-ray diffraction experiments and Rietveld refinement using the GSAS code. Results reveal the material synthesized in a cubic structure (space group Pm3-bar m, no. 221) for 0{<=}x{<=}0.50 and in an orthorhombic (space group Pnma, no. 62) for x>0.50. The approximate grain size was found from experiments' Scanning Electron Microscopy. The electric response was studied by the Impedance Spectroscopy technique from 10.0 mHz up to 0,10 MHz. Electric polarization measurements for SnSrO{sub 3} and SnBaO{sub 3} were determined through curves of polarization as a function of applied electric field, which reveal the ferroelectric character of the material. From the saturation polarization the dielectric constants of materials were calculated.

Point Climat no. 26 'Regional Climate - Air - Energy Plans at the heart of the debate on the energy transition'

International Nuclear Information System (INIS)

Bordier, Cecile; Leseur, Alexia

2013-01-01

Among the publications of CDC Climat Research, 'Climate Briefs' presents, in a few pages, hot topics in climate change policy. This issue addresses the following points: On the eve of the introduction of the environmental assessment procedure for planning documents, almost all Regional Climate - Air - Energy Plans have now been published. This Climate Brief assesses regional climate strategies, which rely on significant commitment from those involved, including citizens by changing their behaviour, companies by improving their energy efficiency and the banking sector through financial support. Identification of these challenges and areas for action will feed into the national debate on energy transition which began last autumn

WHO Standard Acupuncture Point Locations

Directory of Open Access Journals (Sweden)

Sabina Lim

2010-01-01

Full Text Available ‘WHO Standard Acupuncture Point Locations in the Western Pacific Region (WHO Standard was released in 2008. Initially, there were 92/361 controversial acupuncture points (acupoints. Through seven informal consultations and four task force team meetings, 86 points were agreed upon among the 92 controversial acupoints, leaving 6 remaining controversial acupoints, demanding active research in the future. This will enhance the reproducibility and validity of acupuncture studies. It will also lead to a better understanding of acupuncture mechanisms in order to optimize its clinical efficacy for a range of diseases and syndromes. This book has two parts: General Guidelines for Acupuncture Point Locations and WHO Standard Acupuncture Point Locations. First of all, familiarity with the General Guidelines for Acupuncture Point Locations in this book can help the reader to understand and use the contents of this book in depth. I would like to thank all of the participating experts and scholars for this great work, who have overcome the limits of previous acupuncture references. I also appreciate the dedicated effort and harmonious leadership of Dr Choi Seung-hoon, former Regional Adviser in Traditional Medicine of Western Pacific Office, WHO.

Bright point study. [of solar corona

Science.gov (United States)

Tang, F.; Harvey, K.; Bruner, M.; Kent, B.; Antonucci, E.

1982-01-01

Transition region and coronal observations of bright points by instruments aboard the Solar Maximum Mission and high resolution photospheric magnetograph observations on September 11, 1980 are presented. A total of 31 bipolar ephemeral regions were found in the photosphere from birth in 9.3 hours of combined magnetograph observations from three observatories. Two of the three ephemeral regions present in the field of view of the Ultraviolet Spectrometer-Polarimeter were observed in the C IV 1548 line. The unobserved ephemeral region was determined to be the shortest-lived (2.5 hr) and lowest in magnetic flux density (13G) of the three regions. The Flat Crystal Spectrometer observed only low level signals in the O VIII 18.969 A line, which were not statistically significant to be positively identified with any of the 16 ephemeral regions detected in the photosphere. In addition, the data indicate that at any given time there lacked a one-to-one correspondence between observable bright points and photospheric ephemeral regions, while more ephemeral regions were observed than their counterparts in the transition region and the corona.

A Declining Region: Provincial Renaissance Revisited (Case of Volgograd Region

Directory of Open Access Journals (Sweden)

Drozdova Yuliya

2014-12-01

Full Text Available The paper analyzes findings yielded by the empirical study performed in the framework of an RGNF grant entitled “Image of a region as a communicative strategy for the authorities and mass media”. The methods of study included expert survey and formal survey (N=1000, July-September 2013, studying the opinion of respondents who were either internal experts residing in the Volgograd region (N=20; May-September 2013 or external experts who reside outside the region but maintain stable ties with the representatives of state and municipal authorities, regional mass media and business. The findings indicate that the Volgograd region has fallen behind other modernized Russian regions, that young people tend to leave it, that a negative image of the region as a declining territory persists. Answers to the open question “What is unacceptable for you in the existing image of the Volgograd region?” revealed major problems determining the local context of a declining region, and those were issues associated with inefficient regional/municipal administration: “the condition of the roads”, “constant replacement of people in the administration”, “politics as a whole”, “a destitute region without a good manager”, “unemployment”, “countryside is dying off”, “indifference of the authorities”, “roads, housing and public utilities and the administration”, “the authorities are not responsible for the people”, “the authorities do not solve the problems of the city or its people”, “thieving”, “dishonest authorities”, “the region goes to rack and ruin, no kindergartens or jobs”, “one cannot even walk in the streets”, “corruption”, “a stagnant region with low pay”, “no perspectives in the future”, “the region is stagnating due to corruption among officials”. According to the local Census Bureau, the Volgograd region can be classified as a declining territory where the population decline

Streamline-based microfluidic device

Science.gov (United States)

Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Kasdan, Harvey (Inventor)

2013-01-01

The present invention provides a streamline-based device and a method for using the device for continuous separation of particles including cells in biological fluids. The device includes a main microchannel and an array of side microchannels disposed on a substrate. The main microchannel has a plurality of stagnation points with a predetermined geometric design, for example, each of the stagnation points has a predetermined distance from the upstream edge of each of the side microchannels. The particles are separated and collected in the side microchannels.

An X-point ergodic divertor

International Nuclear Information System (INIS)

Chu, M.S.; Jensen, T.H.; La Haye, R.J.; Taylor, T.S.; Evans, T.E.

1991-10-01

A new ergodic divertor is proposed. It utilizes a system of external (n = 3) coils arranged to generate overlapping magnetic islands in the edge region of a diverted tokamak and connect the randomized field lines to the external (cold) divertor plate. The novel feature in the configuration is the placement of the external coils close to the X-point. A realistic design of the external coil set is studied by using the field line tracing method for a low aspect ratio (A ≅ 3) tokamak. Two types of effects are observed. First, by placing the coils close to the X-point, where the poloidal magnetic field is weak and the rational surfaces are closely packed only a moderate amount of current in the external coils is needed to ergodize the edge region. This ergodized edge enhances the edge transport in the X-point region and leads to the potential of edge profile control and the avoidance of edge localized modes (ELMs). Furthermore, the trajectories of the field lines close to the X-point are modified by the external coil set, causing the hit points on the external divertor plates to be randomized and spread out in the major radius direction. A time-dependent modulation of the currents in the external (n = 3) coils can potentially spread the heat flux more uniformly on the divertor plate avoiding high concentration of the heat flux. 10 refs., 9 figs

Order-2 Stability Analysis of Particle Swarm Optimization.

Science.gov (United States)

Liu, Qunfeng

2015-01-01

Several stability analyses and stable regions of particle swarm optimization (PSO) have been proposed before. The assumption of stagnation and different definitions of stability are adopted in these analyses. In this paper, the order-2 stability of PSO is analyzed based on a weak stagnation assumption. A new definition of stability is proposed and an order-2 stable region is obtained. Several existing stable analyses for canonical PSO are compared, especially their definitions of stability and the corresponding stable regions. It is shown that the classical stagnation assumption is too strict and not necessary. Moreover, among all these definitions of stability, it is shown that our definition requires the weakest conditions, and additional conditions bring no benefit. Finally, numerical experiments are reported to show that the obtained stable region is meaningful. A new parameter combination of PSO is also shown to be good, even better than some known best parameter combinations.

Considering a point-source in a regional air pollution model; Prise en compte d`une source ponctuelle dans un modele regional de pollution atmospherique

Energy Technology Data Exchange (ETDEWEB)

Lipphardt, M.

1997-06-19

This thesis deals with the development and validation of a point-source plume model, with the aim to refine the representation of intensive point-source emissions in regional-scale air quality models. The plume is modelled at four levels of increasing complexity, from a modified Gaussian plume model to the Freiberg and Lusis ring model. Plume elevation is determined by Netterville`s plume rise model, using turbulence and atmospheric stability parameters. A model for the effect of a fine-scale turbulence on the mean concentrations in the plume is developed and integrated in the ring model. A comparison between results with and without considering micro-mixing shows the importance of this effect in a chemically reactive plume. The plume model is integrated into the Eulerian transport/chemistry model AIRQUAL, using an interface between Airqual and the sub-model, and interactions between the two scales are described. A simulation of an air pollution episode over Paris is carried out, showing that the utilization of such a sub-scale model improves the accuracy of the air quality model

Csf Based Non-Ground Points Extraction from LIDAR Data

Science.gov (United States)

Shen, A.; Zhang, W.; Shi, H.

2017-09-01

Region growing is a classical method of point cloud segmentation. Based on the idea of collecting the pixels with similar properties to form regions, region growing is widely used in many fields such as medicine, forestry and remote sensing. In this algorithm, there are two core problems. One is the selection of seed points, the other is the setting of the growth constraints, in which the selection of the seed points is the foundation. In this paper, we propose a CSF (Cloth Simulation Filtering) based method to extract the non-ground seed points effectively. The experiments have shown that this method can obtain a group of seed spots compared with the traditional methods. It is a new attempt to extract seed points

Interaction of single-pulse laser energy with bow shock in hypersonic flow

Directory of Open Access Journals (Sweden)

Hong Yanji

2014-04-01

Full Text Available Pressure sensing and schlieren imaging with high resolution and sensitivity are applied to the study of the interaction of single-pulse laser energy with bow shock at Mach 5. An Nd:YAG laser operated at 1.06 μm, 100 mJ pulse energy is used to break down the hypersonic flow in a shock tunnel. Three-dimensional Navier–Stokes equations are solved with an upwind scheme to simulate the interaction. The pressure at the stagnation point on the blunt body is measured and calculated to examine the pressure variation during the interaction. Schlieren imaging is used in conjunction with the calculated density gradients to examine the process of the interaction. The results show that the experimental pressure at the stagnation point on the blunt body and schlieren imaging fit well with the simulation. The pressure at the stagnation point on the blunt body will increase when the transmission shock approaches the blunt body and decrease with the formation of the rarefied wave. Bow shock is deformed during the interaction. Quasi-stationary waves are formed by high rate laser energy deposition to control the bow shock. The pressure and temperature at the stagnation point on the blunt body and the wave drag are reduced to 50%, 75% and 81% respectively according to the simulation. Schlieren imaging has provided important information for the investigation of the mechanism of the interaction.

Credit Stagnation in Latin America

OpenAIRE

Adolfo Barajas; Roberto Steiner

2002-01-01

This study examines the recent marked slowdown in bank credit to the private sector in Latin America. Based on the study of eight countries (Argentina, Bolivia, Brazil, Chile, Colombia, Peru, Mexico, and Venezuela), the magnitude of the slowdown is documented, comparing it to historical behavior and to slowdown episodes in other regions of the world. Second, changes in bank balance sheets are examined to determine whether the credit slowdown is merely a reflection of a slowdown in bank deposi...

A new genus of soft coral (Cnidaria, Octocorallia from the Republic of Congo (Pointe-Noire Region

Directory of Open Access Journals (Sweden)

Leen P. van Ofwegen

2014-12-01

Full Text Available A new genus of soft coral from the Republic of Congo is described, Complexum gen. n. Nine West African octocoral species previously described in the genus Alcyonium by Tixier-Durivault (1955 are referred to this new genus, and a new species is described and figured, C. pusillum sp. n. The new species is characterized by having encrusting growth form and abundant spiny clubs in the surface of the polyparium. It colonizes shallow calcareous rocky banks (5 to 20 m depth existing in coastal water of the region of Pointe-Noire. Based on molecular phylogeny this new genus is well separated from Alcyonium species.

Parcellation of the Healthy Neonatal Brain into 107 Regions Using Atlas Propagation through Intermediate Time Points in Childhood.

Science.gov (United States)

Blesa, Manuel; Serag, Ahmed; Wilkinson, Alastair G; Anblagan, Devasuda; Telford, Emma J; Pataky, Rozalia; Sparrow, Sarah A; Macnaught, Gillian; Semple, Scott I; Bastin, Mark E; Boardman, James P

2016-01-01

Neuroimage analysis pipelines rely on parcellated atlases generated from healthy individuals to provide anatomic context to structural and diffusion MRI data. Atlases constructed using adult data introduce bias into studies of early brain development. We aimed to create a neonatal brain atlas of healthy subjects that can be applied to multi-modal MRI data. Structural and diffusion 3T MRI scans were acquired soon after birth from 33 typically developing neonates born at term (mean postmenstrual age at birth 39(+5) weeks, range 37(+2)-41(+6)). An adult brain atlas (SRI24/TZO) was propagated to the neonatal data using temporal registration via childhood templates with dense temporal samples (NIH Pediatric Database), with the final atlas (Edinburgh Neonatal Atlas, ENA33) constructed using the Symmetric Group Normalization (SyGN) method. After this step, the computed final transformations were applied to T2-weighted data, and fractional anisotropy, mean diffusivity, and tissue segmentations to provide a multi-modal atlas with 107 anatomical regions; a symmetric version was also created to facilitate studies of laterality. Volumes of each region of interest were measured to provide reference data from normal subjects. Because this atlas is generated from step-wise propagation of adult labels through intermediate time points in childhood, it may serve as a useful starting point for modeling brain growth during development.

Parcellation of the healthy neonatal brain into 107 regions using atlas propagation through intermediate time points in childhood

Directory of Open Access Journals (Sweden)

Manuel eBlesa Cabez

2016-05-01

Full Text Available Neuroimage analysis pipelines rely on parcellated atlases generated from healthy individuals to provide anatomic context to structural and diffusion MRI data. Atlases constructed using adult data introduce bias into studies of early brain development. We aimed to create a neonatal brain atlas of healthy subjects that can be applied to multi-modal MRI data. Structural and diffusion 3T MRI scans were acquired soon after birth from 33 typically developing neonates born at term (mean postmenstrual age at birth 39+5 weeks, range 37+2-41+6. An adult brain atlas (SRI24/TZO was propagated to the neonatal data using temporal registration via childhood templates with dense temporal samples (NIH Pediatric Database, with the final atlas (Edinburgh Neonatal Atlas, ENA33 constructed using the Symmetric Group Normalization method. After this step, the computed final transformations were applied to T2-weighted data, and fractional anisotropy, mean diffusivity, and tissue segmentations to provide a multi-modal atlas with 107 anatomical regions; a symmetric version was also created to facilitate studies of laterality. Volumes of each region of interest were measured to provide reference data from normal subjects. Because this atlas is generated from step-wise propagation of adult labels through intermediate time points in childhood, it may serve as a useful starting point for modelling brain growth during development.

Applying circuit theory for corridor expansion and management at regional scales: tiling, pinch points, and omnidirectional connectivity.

Directory of Open Access Journals (Sweden)

David Pelletier

Full Text Available Connectivity models are useful tools that improve the ability of researchers and managers to plan land use for conservation and preservation. Most connectivity models function in a point-to-point or patch-to-patch fashion, limiting their use for assessing connectivity over very large areas. In large or highly fragmented systems, there may be so many habitat patches of interest that assessing connectivity among all possible combinations is prohibitive. To overcome these conceptual and practical limitations, we hypothesized that minor adaptation of the Circuitscape model can allow the creation of omnidirectional connectivity maps illustrating flow paths and variations in the ease of travel across a large study area. We tested this hypothesis in a 24,300 km(2 study area centered on the Montérégie region near Montréal, Québec. We executed the circuit model in overlapping tiles covering the study region. Current was passed across the surface of each tile in orthogonal directions, and then the tiles were reassembled to create directional and omnidirectional maps of connectivity. The resulting mosaics provide a continuous view of connectivity in the entire study area at the full original resolution. We quantified differences between mosaics created using different tile and buffer sizes and developed a measure of the prominence of seams in mosaics formed with this approach. The mosaics clearly show variations in current flow driven by subtle aspects of landscape composition and configuration. Shown prominently in mosaics are pinch points, narrow corridors where organisms appear to be required to traverse when moving through the landscape. Using modest computational resources, these continuous, fine-scale maps of nearly unlimited size allow the identification of movement paths and barriers that affect connectivity. This effort develops a powerful new application of circuit models by pinpointing areas of importance for conservation, broadening the

Somatic point mutations in mtDNA control region are influenced by genetic background and associated with healthy aging: a GEHA study

DEFF Research Database (Denmark)

Rose, Giuseppina; Romeo, Giuseppe; Dato, Serena

2010-01-01

and of mortality risk in the elderly. Our study provides new evidence on the relevance of mtDNA somatic mutations in aging and longevity and confirms that the occurrence of specific point mutations in the mtDNA control region may represent a strategy for the age-related remodelling of organismal functions....

Observed changes in relative humidity and dew point temperature in coastal regions of Iran

Science.gov (United States)

Hosseinzadeh Talaee, P.; Sabziparvar, A. A.; Tabari, Hossein

2012-12-01

The analysis of trends in hydroclimatic parameters and assessment of their statistical significance have recently received a great concern to clarify whether or not there is an obvious climate change. In the current study, parametric linear regression and nonparametric Mann-Kendall tests were applied for detecting annual and seasonal trends in the relative humidity (RH) and dew point temperature ( T dew) time series at ten coastal weather stations in Iran during 1966-2005. The serial structure of the data was considered, and the significant serial correlations were eliminated using the trend-free pre-whitening method. The results showed that annual RH increased by 1.03 and 0.28 %/decade at the northern and southern coastal regions of the country, respectively, while annual T dew increased by 0.29 and 0.15°C per decade at the northern and southern regions, respectively. The significant trends were frequent in the T dew series, but they were observed only at 2 out of the 50 RH series. The results showed that the difference between the results of the parametric and nonparametric tests was small, although the parametric test detected larger significant trends in the RH and T dew time series. Furthermore, the differences between the results of the trend tests were not related to the normality of the statistical distribution.

The Southeastern Aerosol Research and Characterization (SEARCH) study: spatial variations and chemical climatology, 1999-2010.

Science.gov (United States)

Blanchard, C L; Hidy, G M; Tanenbaum, S; Edgerton, E S; Hartsell, B E

2013-03-01

Coast. Regional distribution of emission sources and synoptic-scale meteorological influences favoring stagnation lead to high regionwide pollution levels. The regional influence is greatest with secondary species, including ozone (03) particulate sulfate (SO4), and particulate organic matter, some of which is produced by atmospheric oxidation of volatile organic compounds (VOCs) from vegetation and anthropogenic sources. Other species, many of which are from primary emissions, are more influenced by local sources, especially within the Atlanta, GA, and Birmingham, AL, metropolitan areas. Limited measurements of modern and fossil total carbon point to the importance of biological and biogenic emissions in the Southeast.

DIDACTICS: DEVELOPMENT OR STAGNATION?

Directory of Open Access Journals (Sweden)

I. P. Smirnov

2016-01-01

Full Text Available ARTICLE RETRACTEDThe aim of the paper – the detailed analysis of the monograph «Contents and Structure of Regularities of Process of Training (Theory and Experiment» which is written by the corresponding member of the Russian Academy of Education (RAE, Doctor of pedagogical sciences, Professor I. I. Logvinov. The book was included into a series «Basic researches of institute of the theory and history of pedagogics of the Russian Academy of Education. Proceedings 2008–2012».The review of the monograph of I. I. Logvinov has become a reason for reflections of the author of the present publication about actual, most burning issues of a modern Russian educational system: on the status of pedagogics in modern domestic science; evolutions of didactic knowledge and its typology; quality of dissertation researches and emasculation in scientific pedagogical concepts of the fundamental bases; ideologization of didactics and a role of the state in this process.Sorting basic thesis of I. I. Logvinov’s work, in something agreeing, and in something arguing with the scientist, the author of article claims that it is a serious and necessary work where the extremely important questions concerning the most painful points of the Russian pedagogical science and a condition of our education in general are brought up.

Flow topology adjacent to a fast moving contact line

International Nuclear Information System (INIS)

Royon, A.; Ehrhard, P.

2001-10-01

Coating processes are commonly used in industry. In the present report the physical mechanisms involved in such wetting phenomena are investigated (a) by a numerical and (b) by an experimental approach in a plane section perpendicular to the contact line. The problem relates to a tape plunging vertically into a pool of two immiscible fluids. The equations and boundary conditions describing the problem are treated in non-dimensional form. Several simplifications are introduced to obtain a first approximative solution to the problem. The relevant parameters are the viscosity ratio V V , the density ratio D V and the Reynolds number of the heavy fluid, Re 1 . By a variation of the viscosity ratio or of the Reynolds number we demonstrate the existence of three typical flow structures: (1) stagnation point streamline in the light fluid, (2) stagnation point streamline in the heavy fluid or (3) transition flow with stagnation point streamlines in both fluids. The structure changes continuously from a complex flow in the light fluid to a complex flow in the heavy fluid by an increase of the viscosity ratio or by an increase of the Reynolds number in the heavy fluid. The mechanisms of the transitions, involving a thickening of the viscous boundary layer and inertial effects, are discussed in detail. The solution only weakly depends on the density ratio. In the experiment a PE-tape plunges into a pool of (a) silicone oil M1000 and air, (b) water and silicone oil M50 or (c) water and silicone oil M10. The experimental investigations confirm the existence of the two limit structures, namely a stagnation point streamline in air for the combination (a) or a stagnation point streamline in water for the combination (b). Even the transition from one flow structure to the other is observed with an increase of the Reynolds number for the combination (c). (orig.)

Heat transfer in MHD unsteady stagnation point flow with variable wall temperature

Digital Repository Service at National Institute of Oceanography (India)

Soundalgekar, V.M.; Murty, T.V.R.; Takhar, H.S.

stream_size 8739 stream_content_type text/plain stream_name Indian_J_Pure_Appl_Math_21_384.pdf.txt stream_source_info Indian_J_Pure_Appl_Math_21_384.pdf.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8.... Soc. A224 (1954), 1-23. 2. S. I. Cheng and D. Elliott, Heat Transfer and Fluid Mech. IlIstitUfl?, S:anfoni University. Stanford (CA). 1956, p.p.221-38. 3. S. I. Cheng, Quart. appl. Math. 14 (1956-1957), 337-52. (\\ K. T. Yang, J. Appl. Mecll. (Tr. ASME...

National Pollution Discharge Elimination System (NPDES) Facility Points, Region 9, 2007, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA permit program that regulates...

National Pollution Discharge Elimination System (NPDES) Facility Points, Region 9, 2011, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA permit program that regulates...

National Pollution Discharge Elimination System (NPDES) Outfall Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for facilities which generally represent the site of the discharge. NPDES (National...

National Pollution Discharge Elimination System (NPDES) Facility Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA permit program that regulates...

National Pollution Discharge Elimination System (NPDES) Outfall Points, Region 9, 2011, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for facilities which generally represent the site of the discharge. NPDES (National...

Change Points in the Population Trends of Aerial-Insectivorous Birds in North America: Synchronized in Time across Species and Regions.

Directory of Open Access Journals (Sweden)

Adam C Smith

Full Text Available North American populations of aerial insectivorous birds are in steep decline. Aerial insectivores (AI are a group of bird species that feed almost exclusively on insects in flight, and include swallows, swifts, nightjars, and flycatchers. The causes of the declines are not well understood. Indeed, it is not clear when the declines began, or whether the declines are shared across all species in the group (e.g., caused by changes in flying insect populations or specific to each species (e.g., caused by changes in species' breeding habitat. A recent study suggested that population trends of aerial insectivores changed for the worse in the 1980s. If there was such a change point in trends of the group, understanding its timing and geographic pattern could help identify potential causes of the decline. We used a hierarchical Bayesian, penalized regression spline, change point model to estimate group-level change points in the trends of 22 species of AI, across 153 geographic strata of North America. We found evidence for group-level change points in 85% of the strata. Change points for flycatchers (FC were distinct from those for swallows, swifts and nightjars (SSN across North America, except in the Northeast, where all AI shared the same group-level change points. During the 1980s, there was a negative change point across most of North America, in the trends of SSN. For FC, the group-level change points were more geographically variable, and in many regions there were two: a positive change point followed by a negative change point. This group-level synchrony in AI population trends is likely evidence of a response to a common environmental factor(s with similar effects on many species across broad spatial extents. The timing and geographic patterns of the change points that we identify here should provide a spring-board for research into the causes behind aerial insectivore declines.

Allegheny County Address Points

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

Quantum Triple Point and Quantum Critical End Points in Metallic Magnets.

Science.gov (United States)

Belitz, D; Kirkpatrick, T R

2017-12-29

In low-temperature metallic magnets, ferromagnetic (FM) and antiferromagnetic (AFM) orders can exist, adjacent to one another or concurrently, in the phase diagram of a single system. We show that universal quantum effects qualitatively alter the known phase diagrams for classical magnets. They shrink the region of concurrent FM and AFM order, change various transitions from second to first order, and, in the presence of a magnetic field, lead to either a quantum triple point where the FM, AFM, and paramagnetic phases all coexist or a quantum critical end point.

Problems of regional development as the reflection of the effectiveness of public administration

Directory of Open Access Journals (Sweden)

Vladimir Aleksandrovich Ilyin

2014-09-01

Full Text Available Economic policy of extreme neoliberalism, having been held in Russia for more than twenty years, has led to the present stagnation of socio-economic development of the country. Its concentrated expression has resulted in a rapid deterioration of the budgetary system, especially at the regional level. In the next three-year budget cycle (2014–2016 a great number of Russian regions will be with the deficit and debt load on the verge of bankruptcy. The Russian government doesn’t take any action to prevent crisis processes. On the contrary, the Ministry of Finance, as the conductor of rigid conservative policy, in a less degree is interested in making regionally oriented decisions. Trying to shift the blame for what is happening in the public sector to the regional authorities, the Minister of Finance has offered to the President to dismiss regional governors who have chronic debts. However, this is unlikely to solve the debt problem, because at the present time, the regions have more expenditure commitments than resources for their providing. On the basis of the analysis of the situation in the field of subnational finance, the authors have come to the conclusion that it is necessary to change the approaches to fiscal policy in the system of regional regulation and offer a number of measures in this direction.

Abandoned Uranium Mine (AUM) Points, Navajo Nation, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features of all Abandoned Uranium Mines (AUMs) on or within one mile of the Navajo Nation. Points are centroids developed from the...

Local distribution of wall static pressure and heat transfer on a rough flat plate impinged by a slot air jet

Science.gov (United States)

Meda, Adimurthy; Katti, Vadiraj V.

2017-08-01

The present work experimentally investigates the local distribution of wall static pressure and the heat transfer coefficient on a rough flat plate impinged by a slot air jet. The experimental parameters include, nozzle-to-plate spacing (Z /D h = 0.5-10.0), axial distance from stagnation point ( x/D h ), size of detached rib ( b = 4-12 mm) and Reynolds number ( Re = 2500-20,000). The wall static pressure on the surface is recorded using a Pitot tube and a differential pressure transmitter. Infrared thermal imaging technique is used to capture the temperature distribution on the target surface. It is observed that, the maximum wall static pressure occurs at the stagnation point ( x/D h = 0) for all nozzle-to-plate spacing ( Z/D h ) and rib dimensions studied. Coefficient of wall static pressure ( C p ) decreases monotonically with x/D h . Sub atmospheric pressure is evident in the detached rib configurations for jet to plate spacing up to 6.0 for all ribs studied. Sub atmospheric region is stronger at Z/D h = 0.5 due to the fluid accelerating under the rib. As nozzle to plate spacing ( Z/D h ) increases, the sub-atmospheric region becomes weak and vanishes gradually. Reasonable enhancement in both C p as well as Nu is observed for the detached rib configuration. Enhancement is found to decrease with the increase in the rib width. The results of the study can be used in optimizing the cooling system design.

Quantifying regional cerebral blood flow with N-isopropyl-p-[123I]iodoamphetamine and SPECT by one-point sampling method

International Nuclear Information System (INIS)

Odano, Ikuo; Takahashi, Naoya; Noguchi, Eikichi; Ohtaki, Hiro; Hatano, Masayoshi; Yamazaki, Yoshihiro; Higuchi, Takeshi; Ohkubo, Masaki.

1994-01-01

We developed a new non-invasive technique; one-point sampling method, for quantitative measurement of regional cerebral blood flow (rCBF) with N-isopropyl-p-[ 123 I]iodoamphetamine and SPECT. Although the continuous withdrawal of arterial blood and octanol treatment of the blood are required in the conventional microsphere method, the new technique dose not require these two procedures. The total activity of 123 I-IMP obtained by the continuous withdrawal of arterial blood is inferred by the activity of 133 I-IMP obtained by the one point arterial sample using a regression line. To determine when one point sampling time was optimum for inferring integral input function of the continuous withdrawal and whether the treatment of sampled blood for octanol fraction was required, we examined a correlation between the total activity of arterial blood withdrawn from 0 to 5 min after the injection and the activity of one point sample obtained at time t, and calculated a regression line. As a result, the minimum % error for the inference using the regression line was obtained at 6 min after the 123 I-IMP injection, moreover, the octanol treatment was not required. Then examining an effect on the values of rCBF when the sampling time was deviated from 6 min, we could correct the values in approximately 3% error when the sample was obtained at 6±1 min after the injection. The one-point sampling method provides accurate and relatively non-invasive measurement of rCBF without octanol extraction of arterial blood. (author)

The influence of the stagnation zone on the fluid dynamics at the nozzle exit of a confined and submerged impinging jet

Science.gov (United States)

Jeffers, Nicholas; Stafford, Jason; Conway, Ciaran; Punch, Jeff; Walsh, Edmond

2016-02-01

Low profile impinging jets provide a means to achieve high heat transfer coefficients while occupying a small quantity of space. Consequently, they are found in many engineering applications such as electronics cooling, annealing of metals, food processing, and others. This paper investigates the influence of the stagnation zone fluid dynamics on the nozzle exit flow condition of a low profile, submerged, and confined impinging water jet. The jet was geometrically constrained to a round, 16-mm diameter, square-edged nozzle at a jet exit to target surface spacing ( H/ D) that varied between 0.25 choice of inlet boundary conditions in numerical models, and it was found that it is necessary to model a jet tube length {{ L}{/}{ D}} > 0.5—where D is the inner diameter of the jet—in order to minimise modelling uncertainty.

Geographic Response Plan (GRP) Sensitive Site Points (Editable), Guam, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This is an editable point feature data set with points over Apra Harbor in Guam. These points represent sensitive sites such as access points for public use and...

Impact of Water Chemistry, Pipe Material and Stagnation on the Building Plumbing Microbiome.

Directory of Open Access Journals (Sweden)

Pan Ji

Full Text Available A unique microbiome establishes in the portion of the potable water distribution system within homes and other buildings (i.e., building plumbing. To examine its composition and the factors that shape it, standardized cold water plumbing rigs were deployed at the treatment plant and in the distribution system of five water utilities across the U.S. Three pipe materials (copper with lead solder, CPVC with brass fittings or copper/lead combined pipe were compared, with 8 hour flush cycles of 10 minutes to simulate typical daily use patterns. High throughput Illumina sequencing of 16S rRNA gene amplicons was employed to profile and compare the resident bulk water bacteria and archaea. The utility, location of the pipe rig, pipe material and stagnation all had a significant influence on the plumbing microbiome composition, but the utility source water and treatment practices were dominant factors. Examination of 21 water chemistry parameters suggested that the total chlorine concentration, pH, P, SO42- and Mg were associated with the most of the variation in bulk water microbiome composition. Disinfectant type exerted a notably low-magnitude impact on microbiome composition. At two utilities using the same source water, slight differences in treatment approaches were associated with differences in rare taxa in samples. For genera containing opportunistic pathogens, Utility C samples (highest pH of 9-10 had the highest frequency of detection for Legionella spp. and lowest relative abundance of Mycobacterium spp. Data were examined across utilities to identify a true universal core, special core, and peripheral organisms to deepen insight into the physical and chemical factors that shape the building plumbing microbiome.

National Pollution Discharge Elimination System (NPDES) All Facility Points, Region 9, 2007, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES facilities, outfalls/dischargers, waste water treatment plant facilities and waste water treatment plants...

Impedance analysis of acupuncture points and pathways

International Nuclear Information System (INIS)

Teplan, Michal; Kukucka, Marek; Ondrejkovicová, Alena

2011-01-01

Investigation of impedance characteristics of acupuncture points from acoustic to radio frequency range is addressed. Discernment and localization of acupuncture points in initial single subject study was unsuccessfully attempted by impedance map technique. Vector impedance analyses determined possible resonant zones in MHz region.

A Critical Pragmatism: Marcuse, Adorno, and Peirce on the Artificial Stagnation of Individual and Social Development in Advanced Industrial Societies

Directory of Open Access Journals (Sweden)

Clancy Smith

2009-12-01

Full Text Available This paper will analyze the effects advanced industrial societies have on individual and social development through the eyes of Marcuse’s One-Dimensional Man and the moral consequences of such artificial stagnation through Adorno’s lectures on The Problems of Moral Philosophy. Because such an investigation necessarily brings us into the realm of social psychology, we will turn to the social psychological tradition at the heart of American pragmatism, a target for critical theorists who are often antagonistic to the entire tradition. We will endeavor to advance two alternate readings of the work of C.S. Peirce, arguing that although one type of pragmatism may be justly attacked by critical theorists, there is another, I argue, more critical manifestation of pragmatic human development, that requires the type of autonomy-infused, open-ended development that Marcuse champions. Moreover, I will argue that Peirce’s seminal essay “The Fixation of Belief” anticipated many of Marcuse’s critiques of advanced industrial societies by nearly ninety years.

Effects and mechanisms of Shaofu-Zhuyu decoction and its major bioactive component for Cold - Stagnation and Blood - Stasis primary dysmenorrhea rats.

Science.gov (United States)

Huang, Xiaochen; Su, Shulan; Duan, Jin-Ao; Sha, Xiuxiu; Zhu, Kavin Yue; Guo, Jianming; Yu, Li; Liu, Pei; Shang, Erxin; Qian, Dawei

2016-06-20

Traditional Chinese medicine (TCM) is used under the guidance of the theory of traditional Chinese medical sciences in clinical application. The Chinese herbal formula, Shaofu Zhuyu decoction (SFZYD), is considered as an effective prescription for treating Cold - Stagnation and Blood - Stasis (CSBS) primary dysmenorrhea. The previous studies showed the SFZYD exhibited significant anti-inflammation and analgesic effect. In this present study the metabolomics of CSBS primary dysmenorrhea diseased rats and the cytokine transcription in PHA stimulated-PBMC were investigated to explore the effects and mechanisms. Explore a valuable insight into the effects and mechanisms of SFZYD on Cold - Stagnation and Blood - Stasis primary dysmenorrhea rats. We established CSBS primary dysmenorrhea diseased rats according the clinical symptoms. A targeted tandem mass spectrometry (MS/MS)-based metabolomic platform was used to evaluate the metabolic profiling changes and the intervention effects by SFZYD. The PBMC cell was adopted to explore the mechanisms by analyzing the signaling pathway evaluated by expression of inflammatory cytokines, c-jun and c-fos and corresponding phosphorylation levels. Estradiol, oxytocin, progesterone, endothelin, β-endorphin and PGF2α were restored back to the normal level after the treatment of SFZYD. Total twenty-five metabolites (10 in plasma and 15 in urine), up-regulated or down-regulated, were identified. These identified biomarkers underpinning the metabolic pathway including pentose and glucuronate interconversions, steroid hormone biosynthesis, and glycerophospholipid metabolism are disturbed in model rats. Among these metabolites, twenty one potential biomarkers were regulated after SFZYD treated. The compound of paeoniflorin, a major bioactive compound in SFZYD, was proved to regulate the MAPK signaling pathway by inhibiting the expression of IL-1β, IL-2, IL-10, IL-12, TNFα, INFγ, c-jun and c-fos in PHA stimulated-PBMC. These findings

Reynolds number and geometry effects in laminar axisymmetric isothermal counterflows

KAUST Repository

Scribano, Gianfranco

2016-12-29

The counterflow configuration is a canonical stagnation flow, featuring two opposed impinging round jets and a mixing layer across the stagnation plane. Although counterflows are used extensively in the study of reactive mixtures and other applications where mixing of two streams is required, quantitative data on the scaling properties of the flow field are lacking. The aim of this work is to characterize the velocity and mixing fields in isothermal counterflows over a wide range of conditions. The study features both experimental data from particle image velocimetry and results from detailed axisymmetric simulations. The scaling laws for the nondimensional velocity and mixture fraction are obtained as a function of an appropriate Reynolds number and the ratio of the separation distance of the nozzles to their diameter. In the range of flow configurations investigated, the nondimensional fields are found to depend primarily on the separation ratio and, to a lesser extent, the Reynolds number. The marked dependence of the velocity field with respect to the separation ratio is linked to a high pressure region at the stagnation point. On the other hand, Reynolds number effects highlight the role played by the wall boundary layer on the interior of the nozzles, which becomes less important as the separation ratio decreases. The normalized strain rate and scalar dissipation rate at the stagnation plane are found to attain limiting values only for high values of the Reynolds number. These asymptotic values depend markedly on the separation ratio and differ significantly from the values produced by analytical models. The scaling of the mixing field does not show a limiting behavior as the separation ratio decreases to the smallest practical value considered.

Quantification of regional cerebral blood flow (rCBF) measurement with one point sampling by sup 123 I-IMP SPECT

Energy Technology Data Exchange (ETDEWEB)

Munaka, Masahiro [University of Occupational and Enviromental Health, Kitakyushu (Japan); Iida, Hidehiro; Murakami, Matsutaro

1992-02-01

A handy method of quantifying regional cerebral blood flow (rCBF) measurement by {sup 123}I-IMP SPECT was designed. A standard input function was made and the sampling time to calibrate this standard input function by one point sampling was optimized. An average standard input function was obtained from continuous arterial samplings of 12 healthy adults. The best sampling time was the minimum differential value between the integral calculus value of the standard input function calibrated by one point sampling and the input funciton by continuous arterial samplings. This time was 8 minutes after an intravenous injection of {sup 123}I-IMP and an error was estimated to be {+-}4.1%. The rCBF values by this method were evaluated by comparing them with the rCBF values of the input function with continuous arterial samplings in 2 healthy adults and a patient with cerebral infarction. A significant correlation (r=0.764, p<0.001) was obtained between both. (author).

Multi-Class Simultaneous Adaptive Segmentation and Quality Control of Point Cloud Data

Directory of Open Access Journals (Sweden)

Ayman Habib

2016-01-01

Full Text Available 3D modeling of a given site is an important activity for a wide range of applications including urban planning, as-built mapping of industrial sites, heritage documentation, military simulation, and outdoor/indoor analysis of airflow. Point clouds, which could be either derived from passive or active imaging systems, are an important source for 3D modeling. Such point clouds need to undergo a sequence of data processing steps to derive the necessary information for the 3D modeling process. Segmentation is usually the first step in the data processing chain. This paper presents a region-growing multi-class simultaneous segmentation procedure, where planar, pole-like, and rough regions are identified while considering the internal characteristics (i.e., local point density/spacing and noise level of the point cloud in question. The segmentation starts with point cloud organization into a kd-tree data structure and characterization process to estimate the local point density/spacing. Then, proceeding from randomly-distributed seed points, a set of seed regions is derived through distance-based region growing, which is followed by modeling of such seed regions into planar and pole-like features. Starting from optimally-selected seed regions, planar and pole-like features are then segmented. The paper also introduces a list of hypothesized artifacts/problems that might take place during the region-growing process. Finally, a quality control process is devised to detect, quantify, and mitigate instances of partially/fully misclassified planar and pole-like features. Experimental results from airborne and terrestrial laser scanning as well as image-based point clouds are presented to illustrate the performance of the proposed segmentation and quality control framework.

Validity of the Water Hammer Formula for Determining Regional Aortic Pulse Wave Velocity: Comparison of One-Point and Two-Point (Foot-to-Foot) Measurements Using a Multisensor Catheter in Human.

Science.gov (United States)

Hanya, Shizuo

2013-01-01

Lack of high-fidelity simultaneous measurements of pressure and flow velocity in the aorta has impeded the direct validation of the water-hammer formula for estimating regional aortic pulse wave velocity (AO-PWV1) and has restricted the study of the change of beat-to-beat AO-PWV1 under varying physiological conditions in man. Aortic pulse wave velocity was derived using two methods in 15 normotensive subjects: 1) the conventional two-point (foot-to-foot) method (AO-PWV2) and 2) a one-point method (AO-PWV1) in which the pressure velocity-loop (PV-loop) was analyzed based on the water hammer formula using simultaneous measurements of flow velocity (Vm) and pressure (Pm) at the same site in the proximal aorta using a multisensor catheter. AO-PWV1 was calculated from the slope of the linear regression line between Pm and Vm where wave reflection (Pb) was at a minimum in early systole in the PV-loop using the water hammer formula, PWV1 = (Pm/Vm)/ρ, where ρ is the blood density. AO-PWV2 was calculated using the conventional two-point measurement method as the distance/traveling time of the wave between 2 sites for measuring P in the proximal aorta. Beat-to-beat alterations of AO-PWV1 in relationship to aortic pressure and linearity of the initial part of the PV-loop during a Valsalva maneuver were also assessed in one subject. The initial part of the loop became steeper in association with the beat-to-beat increase in diastolic pressure in phase 4 during the Valsalva maneuver. The linearity of the initial part of the PV-loop was maintained consistently during the maneuver. Flow velocity vs. pressure in the proximal aorta was highly linear during early systole, with Pearson's coefficients ranging from 0.9954 to 0.9998. The average values of AO-PWV1 and AO-PWV2 were 6.3 ± 1.2 and 6.7 ± 1.3 m/s, respectively. The regression line of AO-PWV1 on AO-PWV2 was y = 0.95x + 0.68 (r = 0.93, p <0.001). This study concluded that the water-hammer formula (one-point method) provides

Large amplitude oscillation of a boiling bubble growing at a wall in stagnation flow

International Nuclear Information System (INIS)

Geld, C.W.M. van der; Berg, R. van de; Peukert, P.

2009-01-01

A boiling bubble is created on an artificial site that is part of a bubble generator that is mounted at the center of a pipe. Downflow of water impinges on the bubble generator and creates a stagnation flow above the artificial cavity. Stable axisymmetric elongation in the direction away from the wall and multiple shape oscillation cycles are observed. The time of growth and attachment is typically of the order of 250 ms. Amongst the length scales that characterize the bubble shape is the radius of curvature of the upper part of the bubble, R. The period of oscillation, T, is strongly dependent on time, as is R. The parameters C and m in the defining equation T = C R m √(ρL/σ) have been determined by fitting to data of more than 100 bubbles. For each operating condition, the same values of C and m have been found. The value of m is 1.49 ± 0.02, which is explained from the continuous growth of the bubble and from the relation to the period of oscillation of a free bubble deforming in the fundamental mode corresponding to the third Legendre Polynomial. For the latter, R is the radius of the volume-equivalent sphere, R 0 , and C is √12, while for attached boiling bubbles C is found to amount 1.9√12. The difference is easily explained from the continuous growth, difference in definition, finite amplitude oscillation and proximity of the wall. (author)

Large amplitude oscillation of a boiling bubble growing at a wall in stagnation flow

Energy Technology Data Exchange (ETDEWEB)

Geld, C.W.M. van der; Berg, R. van de; Peukert, P. [Eindhoven University of Technology, Eindhoven (Netherlands). Faculty of Mechanical Engineering], e-mail: C.W.M._v.d.Geld@tue.nl

2009-07-01

A boiling bubble is created on an artificial site that is part of a bubble generator that is mounted at the center of a pipe. Downflow of water impinges on the bubble generator and creates a stagnation flow above the artificial cavity. Stable axisymmetric elongation in the direction away from the wall and multiple shape oscillation cycles are observed. The time of growth and attachment is typically of the order of 250 ms. Amongst the length scales that characterize the bubble shape is the radius of curvature of the upper part of the bubble, R. The period of oscillation, T, is strongly dependent on time, as is R. The parameters C and m in the defining equation T = C R{sup m} {radical}({rho}L/{sigma}) have been determined by fitting to data of more than 100 bubbles. For each operating condition, the same values of C and m have been found. The value of m is 1.49 {+-} 0.02, which is explained from the continuous growth of the bubble and from the relation to the period of oscillation of a free bubble deforming in the fundamental mode corresponding to the third Legendre Polynomial. For the latter, R is the radius of the volume-equivalent sphere, R{sub 0}, and C is {radical}12, while for attached boiling bubbles C is found to amount 1.9{radical}12. The difference is easily explained from the continuous growth, difference in definition, finite amplitude oscillation and proximity of the wall. (author)

Environmental monitoring near the Macaulay Point and Clover Point marine sewage outfalls at Victoria, British Columbia in 1989 and 1990. Regional data report No. DR 92-14

Energy Technology Data Exchange (ETDEWEB)

Colodey, A G; Salmon, R A; Lim, P G

1992-01-01

The marine environment surrounding the Capital Region district (CRD) of British Columbia that includes the City of Victoria has been monitored by municipal, provincial, and federal authorities over the past 20 years to determine the impact of wastewater discharges. This report presents data from limited sampling conducted near the main CRD deep-water outfalls at Clover and Macaulay Points, the Canadian Department of National Defence septic tank outfall off Belmont and Esquimault Lagoon, and reference locations on Constance Bank and Discovery Island. Samples for this study were collected in April and October 1989, and April 1990. Parameters investigated were sediment and biota trace metals, sediment particle size, sediment volatile residues, visual descriptions of sediment, bacterial counts, water conductivity, temperature, salinity, and dissolved oxygen.

Ideal MHD equilibrium of a weakly toroidal plasma column with elongated cross-section

International Nuclear Information System (INIS)

Heesch, E.J.M. van; Schuurman, W.

1980-07-01

Solutions are obtained of the ideal MHD equations describing the equilibrium of a weakly toroidal plasma with an elliptic cross-section surrounded by a force-free magnetic field with constant ratio between current density and magnetic field strength. The force-free field parameter causes the stagnation points to recede along the major axis of the ellipse. Above a certain value of the force-free field parameter, stagnation points do not exist, so that the compression ratio of the plasma column is no longer limited. The analysis was carried out to first order in the force-free field parameter as well as to second order for an estimate of the error

Local parametric instability near elliptic points in vortex flows under shear deformation

Energy Technology Data Exchange (ETDEWEB)

Koshel, Konstantin V., E-mail: kvkoshel@poi.dvo.ru [Pacific Oceanological Institute, FEB RAS, 43, Baltiyskaya Street, Vladivostok 690041 (Russian Federation); Institute of Applied Mathematics, FEB RAS, 7, Radio Street, Vladivostok 690022 (Russian Federation); Far Eastern Federal University, 8, Sukhanova Street, Vladivostok 690950 (Russian Federation); Ryzhov, Eugene A., E-mail: ryzhovea@gmail.com [Pacific Oceanological Institute, FEB RAS, 43, Baltiyskaya Street, Vladivostok 690041 (Russian Federation)

2016-08-15

The dynamics of two point vortices embedded in an oscillatory external flow consisted of shear and rotational components is addressed. The region associated with steady-state elliptic points of the vortex motion is established to experience local parametric instability. The instability forces the point vortices with initial positions corresponding to the steady-state elliptic points to move in spiral-like divergent trajectories. This divergent motion continues until the nonlinear effects suppress their motion near the region associated with the steady-state separatrices. The local parametric instability is then demonstrated not to contribute considerably to enhancing the size of the chaotic motion regions. Instead, the size of the chaotic motion region mostly depends on overlaps of the nonlinear resonances emerging in the perturbed system.

Vendor compliance with Ontario's tobacco point of sale legislation.

Science.gov (United States)

Dubray, Jolene M; Schwartz, Robert M; Garcia, John M; Bondy, Susan J; Victor, J Charles

2009-01-01

On May 31, 2006, Ontario joined a small group of international jurisdictions to implement legislative restrictions on tobacco point of sale promotions. This study compares the presence of point of sale promotions in the retail tobacco environment from three surveys: one prior to and two following implementation of the legislation. Approximately 1,575 tobacco vendors were randomly selected for each survey. Each regionally-stratified sample included equal numbers of tobacco vendors categorized into four trade classes: chain convenience, independent convenience and discount, gas stations, and grocery. Data regarding the six restricted point of sale promotions were collected using standardized protocols and inspection forms. Weighted estimates and 95% confidence intervals were produced at the provincial, regional and vendor trade class level using the bootstrap method for estimating variance. At baseline, the proportion of tobacco vendors who did not engage in each of the six restricted point of sale promotions ranged from 41% to 88%. Within four months following implementation of the legislation, compliance with each of the six restricted point of sale promotions exceeded 95%. Similar levels of compliance were observed one year later. Grocery stores had the fewest point of sale promotions displayed at baseline. Compliance rates did not differ across vendor trade classes at either follow-up survey. Point of sale promotions did not differ across regions in any of the three surveys. Within a short period of time, a high level of compliance with six restricted point of sale promotions was achieved.

Allegheny County Cell Tower Points

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset portrays cell tower locations as points in Allegheny County. The dataset is based on outbuilding codes in the Property Assessment Parcel Database used...

A study of the behavior of labor industrial productivity in the regions of Brazil during the period 1996 to 2010

Directory of Open Access Journals (Sweden)

Edileuza Vital Galeano

2013-12-01

Full Text Available The objective of this paper is to present an empirical study of the behavior of labor industrial productivity in the regions of Brazil during the period 1996 to 2010 by groups of technology intensity. It was used the shift-share method. The results indicated that in the groups of sectors that showed positive growth rates were the competitive advantages inherent to each region that explained, in most cases, the growth of labor productivity. There was predominance of technology absorbing sectors in prejudice of sectors that generate technological spillovers. The growth of labor productivity in the extractive industry showed a upward trend, while the manufacturing industry showed downward trend, evidencing a stagnation of labor productivity at the national level. There are evidences of a reprimarization process of industrial activities through the specialization in commodities.

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Points, Region 9, 2007, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA...

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Points, Region 9, 2011, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA...

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA...

Forty years of improvements in European air quality: regional policy-industry interactions with global impacts

Directory of Open Access Journals (Sweden)

M. Crippa

2016-03-01

Full Text Available The EDGARv4.3.1 (Emissions Database for Global Atmospheric Research global anthropogenic emissions inventory of gaseous (SO2, NOx, CO, non-methane volatile organic compounds and NH3 and particulate (PM10, PM2.5, black and organic carbon air pollutants for the period 1970–2010 is used to develop retrospective air pollution emissions scenarios to quantify the roles and contributions of changes in energy consumption and efficiency, technology progress and end-of-pipe emission reduction measures and their resulting impact on health and crop yields at European and global scale. The reference EDGARv4.3.1 emissions include observed and reported changes in activity data, fuel consumption and air pollution abatement technologies over the past 4 decades, combined with Tier 1 and region-specific Tier 2 emission factors. Two further retrospective scenarios assess the interplay of policy and industry. The highest emission STAG_TECH scenario assesses the impact of the technology and end-of-pipe reduction measures in the European Union, by considering historical fuel consumption, along with a stagnation of technology with constant emission factors since 1970, and assuming no further abatement measures and improvement imposed by European emission standards. The lowest emission STAG_ENERGY scenario evaluates the impact of increased fuel consumption by considering unchanged energy consumption since the year 1970, but assuming the technological development, end-of-pipe reductions, fuel mix and energy efficiency of 2010. Our scenario analysis focuses on the three most important and most regulated sectors (power generation, manufacturing industry and road transport, which are subject to multi-pollutant European Union Air Quality regulations. Stagnation of technology and air pollution reduction measures at 1970 levels would have led to 129 % (or factor 2.3 higher SO2, 71 % higher NOx and 69 % higher PM2.5 emissions in Europe (EU27, demonstrating the large

Late Permian to Triassic intraplate orogeny of the southern Tianshan and adjacent regions, NW China

Directory of Open Access Journals (Sweden)

Wei Ju

2014-01-01

Based on previous studies and recent geochronogical data, we suggest that the final collision between the Tarim Craton and the North Asian continent occurred during the late Carboniferous. Therefore, the Permian was a period of intracontinental environment in the southern Tianshan and adjacent regions. We propose that an earlier, small-scale intraplate orogenic stage occurred in late Permian to Triassic time, which was the first intraplate process in the South Tianshan Orogen and adjacent regions. The later large-scale and well-known Neogene to Quaternary intraplate orogeny was induced by the collision between the India subcontinent and the Eurasian plate. The paper presents a new evolutionary model for the South Tianshan Orogen and adjacent regions, which includes seven stages: (I late Ordovician–early Silurian opening of the South Tianshan Ocean; (II middle Silurian–middle Devonian subduction of the South Tianshan Ocean beneath an active margin of the North Asian continent; (III late Devonian–late Carboniferous closure of the South Tianshan Ocean and collision between the Kazakhstan-Yili and Tarim continental blocks; (IV early Permian post-collisional magmatism and rifting; (V late Permian–Triassic the first intraplate orogeny; (VI Jurassic–Palaeogene tectonic stagnation and (VII Neocene–Quaternary intraplate orogeny.

Heating plant privatization stagnates

International Nuclear Information System (INIS)

Janoska, J.; Benka, M.; Sobinkovic, B.; Haluza, I.

2005-01-01

The state has been talking about privatization of 6 municipal heating plants since 2001. The tenders were to start last year. But nothing has happened and the future is uncertain. The city councils would prefer to receive, if not 100%, then at least a majority stake in the heating plants free of charge. But the Cabinet has decided to sell 51% to investors. The privatization agency - the National Property Fund (FNM) is preparing a proposal to increase the stake offered for sale to 67%. According to information provided by the FNM the sale will begin after Cabinet approval. The Fund intends to apply the same model to the sale of all the heating plants. Last year, a major German company Verbundnetz Gas declared its interest in purchasing large municipal heating plants in Slovakia. But it has been waiting for a response ever since. The French company - Dalkia, which has 10-years' experience of doing business in Slovakia, is interested in all the heating plants to be offered for sale. The Austrian company - Stefe is not new to the business either, it is interested mainly in the regions where it has already established itself - Central and Eastern Slovakia. Strategic investors expect financial groups to show interest too. The Penta Group has not hid its ambitions - it has already privatised a company which represents the key to the future development of heat management in Bratislava - Paroplynovy cyklus. Whereas Penta is not new to the heat production business another financial group - Slavia Capital is still surveying the sector. Should it not succeed, it plans several projects that would allow it to take a stake in the sector

Satellite- and Epoch Differenced Precise Point Positioning Based on a Regional Augmentation Network

Directory of Open Access Journals (Sweden)

Bin Wu

2012-06-01

Full Text Available Precise Point Positioning (PPP has been demonstrated as a simple and effective approach for user positioning. The key issue in PPP is how to shorten convergence time and improve positioning efficiency. Recent researches mainly focus on the ambiguity resolution by correcting residual phase errors at a single station. The success of this approach (referred to hereafter as NORM-PPP is subject to how rapidly one can fix wide-lane and narrow-lane ambiguities to achieve the first ambiguity-fixed solution. The convergence time of NORM-PPP is receiver type dependent, and normally takes 15–20 min. Different from the general algorithm and theory by which the float ambiguities are estimated and the integer ambiguities are fixed, we concentrate on a differential PPP approach: the satellite- and epoch differenced (SDED approach. In general, the SDED approach eliminates receiver clocks and ambiguity parameters and thus avoids the complicated residual phase modeling procedure. As a further development of the SDED approach, we use a regional augmentation network to derive tropospheric delay and remaining un-modeled errors at user sites. By adding these corrections and applying the Robust estimation, the weak mathematic properties due to the ED operation is much improved. Implementing this new approach, we need only two epochs of data to achieve PPP positioning converging to centimeter-positioning accuracy. Using seven days of GPS data at six CORS stations in Shanghai, we demonstrate the success rate, defined as the case when three directions converging to desired positioning accuracy of 10 cm, reaches 100% when the interval between the two epochs is longer than 15 min. Comparing the results of 15 min’ interval to that of 10 min’, it is observed that the position RMS improves from 2.47, 3.95, 5.78 cm to 2.21, 3.93, 4.90 cm in the North, East and Up directions, respectively. Combining the SDED coordinates at the starting point and the ED relative

Glacier Surface Lowering and Stagnation in the Manaslu Region of Nepal

Science.gov (United States)

Robson, B. A.; Nuth, C.; Nielsen, P. R.; Hendrickx, M.; Dahl, S. O.

2015-12-01

Frequent and up-to-date glacier outlines are needed for many applications of glaciology, not only glacier area change analysis, but also for masks in volume or velocity analysis, for the estimation of water resources and as model input data. Remote sensing offers a good option for creating glacier outlines over large areas, but manual correction is frequently necessary, especially in areas containing supraglacial debris. We show three different workflows for mapping clean ice and debris-covered ice within Object Based Image Analysis (OBIA). By working at the object level as opposed to the pixel level, OBIA facilitates using contextual, spatial and hierarchical information when assigning classes, and additionally permits the handling of multiple data sources. Our first example shows mapping debris-covered ice in the Manaslu Himalaya, Nepal. SAR Coherence data is used in combination with optical and topographic data to classify debris-covered ice, obtaining an accuracy of 91%. Our second example shows using a high-resolution LiDAR derived DEM over the Hohe Tauern National Park in Austria. Breaks in surface morphology are used in creating image objects; debris-covered ice is then classified using a combination of spectral, thermal and topographic properties. Lastly, we show a completely automated workflow for mapping glacier ice in Norway. The NDSI and NIR/SWIR band ratio are used to map clean ice over the entire country but the thresholds are calculated automatically based on a histogram of each image subset. This means that in theory any Landsat scene can be inputted and the clean ice can be automatically extracted. Debris-covered ice can be included semi-automatically using contextual and morphological information.

Regional Geography Is Dead: Long Live Regional Geography! With an Example from Southern Italy.

Science.gov (United States)

King, Russell

1979-01-01

Recounts criticisms of regional geography and points out three reasons for retaining it: growth of regional science, area studies, and regional planning. Evaluates Southern Italy as an example of the uses of regional analyses. For journal availability, see SO 507 291. (Author/CK)

A carrier-based approach for overmodulation of three-level neutral-point-lamped inverter with zero neutral-point current

DEFF Research Database (Denmark)

Maheshwari, Ram Krishan; Munk-Nielsen, Stig; Busquets-Monge, S.

2012-01-01

In a voltage source inverter, overmodulation is required to extend the range of operation and enhance the dc-link voltage utilization. A carrier-based implementation of a modulation strategy for the three-level neutral-point-clamped inverter is proposed for the overmodulation region. The modulation...... strategy ensures zero average neutral-point current in a switching period. A newly proposed boundary compression is used to regulate the dc-link voltage at all operating points. A description of the algorithm to implement the modulation strategy is also presented. The main advantage of the proposed...

Wolf Point Substation, Roosevelt County, Montana

International Nuclear Information System (INIS)

1991-05-01

The Western Area Power Administration (Western), an agency of the United States Department of Energy, is proposing to construct the 115-kV Wolf Point Substation near Wolf Point in Roosevelt County, Montana (Figure 1). As part of the construction project, Western's existing Wolf Point Substation would be taken out of service. The existing 115-kV Wolf Point Substation is located approximately 3 miles west of Wolf Point, Montana (Figure 2). The substation was constructed in 1949. The existing Wolf Point Substation serves as a ''Switching Station'' for the 115-kV transmission in the region. The need for substation improvements is based on operational and reliability issues. For this environmental assessment (EA), the environmental review of the proposed project took into account the removal of the old Wolf Point Substation, rerouting of the five Western lines and four lines from the Cooperatives and Montana-Dakota Utilities Company, and the new road into the proposed substation. Reference to the new proposed Wolf Point Substation in the EA includes these facilities as well as the old substation site. The environmental review looked at the impacts to all resource areas in the Wolf Point area. 7 refs., 6 figs

Hot air impingement on a flat plate using Large Eddy Simulation (LES) technique

Science.gov (United States)

Plengsa-ard, C.; Kaewbumrung, M.

2018-01-01

Impinging hot gas jets to a flat plate generate very high heat transfer coefficients in the impingement zone. The magnitude of heat transfer prediction near the stagnation point is important and accurate heat flux distribution are needed. This research studies on heat transfer and flow field resulting from a single hot air impinging wall. The simulation is carried out using computational fluid dynamics (CFD) commercial code FLUENT. Large Eddy Simulation (LES) approach with a subgrid-scale Smagorinsky-Lilly model is present. The classical Werner-Wengle wall model is used to compute the predicted results of velocity and temperature near walls. The Smagorinsky constant in the turbulence model is set to 0.1 and is kept constant throughout the investigation. The hot gas jet impingement on the flat plate with a constant surface temperature is chosen to validate the predicted heat flux results with experimental data. The jet Reynolds number is equal to 20,000 and a fixed jet-to-plate spacing of H/D = 2.0. Nusselt number on the impingement surface is calculated. As predicted by the wall model, the instantaneous computed Nusselt number agree fairly well with experimental data. The largest values of calculated Nusselt number are near the stagnation point and decrease monotonically in the wall jet region. Also, the contour plots of instantaneous values of wall heat flux on a flat plate are captured by LES simulation.

When should we recommend use of dual time-point and delayed time-point imaging techniques in FDG PET?

Energy Technology Data Exchange (ETDEWEB)

Cheng, Gang [Philadelphia VA Medical Center, Department of Radiology, Philadelphia, PA (United States); Hospital of the University of Pennsylvania, Department of Radiology, Philadelphia, PA (United States); Torigian, Drew A.; Alavi, Abass [Hospital of the University of Pennsylvania, Department of Radiology, Philadelphia, PA (United States); Zhuang, Hongming [Children' s Hospital of Philadelphia, Department of Radiology, Philadelphia, PA (United States)

2013-05-15

FDG PET and PET/CT are now widely used in oncological imaging for tumor characterization, staging, restaging, and response evaluation. However, numerous benign etiologies may cause increased FDG uptake indistinguishable from that of malignancy. Multiple studies have shown that dual time-point imaging (DTPI) of FDG PET may be helpful in differentiating malignancy from benign processes. However, exceptions exist, and some studies have demonstrated significant overlap of FDG uptake patterns between benign and malignant lesions on delayed time-point images. In this review, we summarize our experience and opinions on the value of DTPI and delayed time-point imaging in oncology, with a review of the relevant literature. We believe that the major value of DTPI and delayed time-point imaging is the increased sensitivity due to continued clearance of background activity and continued FDG accumulation in malignant lesions, if the same diagnostic criteria (as in the initial standard single time-point imaging) are used. The specificity of DTPI and delayed time-point imaging depends on multiple factors, including the prevalence of malignancies, the patient population, and the cut-off values (either SUV or retention index) used to define a malignancy. Thus, DTPI and delayed time-point imaging would be more useful if performed for evaluation of lesions in regions with significant background activity clearance over time (such as the liver, the spleen, the mediastinum), and if used in the evaluation of the extent of tumor involvement rather than in the characterization of the nature of any specific lesion. Acute infectious and non-infectious inflammatory lesions remain as the major culprit for diminished diagnostic performance of these approaches (especially in tuberculosis-endemic regions). Tumor heterogeneity may also contribute to inconsistent performance of DTPI. The authors believe that selective use of DTPI and delayed time-point imaging will improve diagnostic accuracy and

Observable Emission Features of Black Hole GRMHD Jets on Event Horizon Scales

Energy Technology Data Exchange (ETDEWEB)

Pu, Hung-Yi [Perimeter Institute for Theoretical Physics, 31 Caroline Street North, Waterloo, ON, N2L 2Y5 (Canada); Wu, Kinwah [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Younsi, Ziri; Mizuno, Yosuke [Institut für Theoretische Physik, Max-von-Laue-Straße 1, D-60438 Frankfurt am Main (Germany); Asada, Keiichi; Nakamura, Masanori, E-mail: hpu@perimeterinstitute.ca, E-mail: asada@asiaa.sinica.edu.tw, E-mail: nakamura@asiaa.sinica.edu.tw, E-mail: kinwah.wu@ucl.ac.uk, E-mail: younsi@th.physik.uni-frankfurt.de, E-mail: mizuno@th.physik.uni-frankfurt.de [Institute of Astronomy and Astrophysics, Academia Sinica, 11F of Astronomy-Mathematics Building, AS/NTU No. 1, Taipei 10617, Taiwan (China)

2017-08-20

The general-relativistic magnetohydrodynamical (GRMHD) formulation for black hole-powered jets naturally gives rise to a stagnation surface, where inflows and outflows along magnetic field lines that thread the black hole event horizon originate. We derive a conservative formulation for the transport of energetic electrons, which are initially injected at the stagnation surface and subsequently transported along flow streamlines. With this formulation the energy spectra evolution of the electrons along the flow in the presence of radiative and adiabatic cooling is determined. For flows regulated by synchrotron radiative losses and adiabatic cooling, the effective radio emission region is found to be finite, and geometrically it is more extended along the jet central axis. Moreover, the emission from regions adjacent to the stagnation surface is expected to be the most luminous as this is where the freshly injected energetic electrons are concentrated. An observable stagnation surface is thus a strong prediction of the GRMHD jet model with the prescribed non-thermal electron injection. Future millimeter/submillimeter (mm/sub-mm) very-long-baseline interferometric observations of supermassive black hole candidates, such as the one at the center of M87, can verify this GRMHD jet model and its associated non-thermal electron injection mechanism.

Botulinum Toxin A for Oral Cavity Cancer Patients: In Microsurgical Patients BTX Injections in Major Salivary Glands Temporarily Reduce Salivary Production and the Risk of Local Complications Related to Saliva Stagnation

Directory of Open Access Journals (Sweden)

Bartolo Corradino

2012-10-01

Full Text Available In patients suffering from oral cavity cancer surgical treatment is complex because it is necessary to remove carcinoma and lymph node metastasis (through a radical unilateral or bilateral neck dissection and to reconstruct the affected area by means of free flaps. The saliva stagnation in the post-operative period is a risk factor with regard to local complications. Minor complications related to saliva stagnation (such as tissue maceration and wound dehiscence could become major complications compromising the surgery or the reconstructive outcome. In fact the formation of oro-cutaneous fistula may cause infection, failure of the free flap, or the patient’s death with carotid blow-out syndrome. Botulinum injections in the major salivary glands, four days before surgery, temporarily reduces salivation during the healing stage and thus could reduce the incidence of saliva-related complications. Forty three patients with oral cancer were treated with botulinum toxin A. The saliva quantitative measurement and the sialoscintigraphy were performed before and after infiltrations of botulinum toxin in the major salivary glands. In all cases there was a considerable, but temporary, reduction of salivary secretion. A lower rate of local complications was observed in the post-operative period. The salivary production returned to normal within two months, with minimal side effects and discomfort for the patients. The temporary inhibition of salivary secretion in the post-operative period could enable a reduction in saliva-related local complications, in the incidence of oro-cutaneous fistulas, and improve the outcome of the surgery as well as the quality of residual life in these patients.

Botulinum toxin A for oral cavity cancer patients: in microsurgical patients BTX injections in major salivary glands temporarily reduce salivary production and the risk of local complications related to saliva stagnation.

Science.gov (United States)

Corradino, Bartolo; Di Lorenzo, Sara; Moschella, Francesco

2012-10-24

In patients suffering from oral cavity cancer surgical treatment is complex because it is necessary to remove carcinoma and lymph node metastasis (through a radical unilateral or bilateral neck dissection) and to reconstruct the affected area by means of free flaps. The saliva stagnation in the post-operative period is a risk factor with regard to local complications. Minor complications related to saliva stagnation (such as tissue maceration and wound dehiscence) could become major complications compromising the surgery or the reconstructive outcome. In fact the formation of oro-cutaneous fistula may cause infection, failure of the free flap, or the patient’s death with carotid blow-out syndrome. Botulinum injections in the major salivary glands, four days before surgery, temporarily reduces salivation during the healing stage and thus could reduce the incidence of saliva-related complications. Forty three patients with oral cancer were treated with botulinum toxin A. The saliva quantitative measurement and the sialoscintigraphy were performed before and after infiltrations of botulinum toxin in the major salivary glands. In all cases there was a considerable, but temporary, reduction of salivary secretion. A lower rate of local complications was observed in the post-operative period. The salivary production returned to normal within two months, with minimal side effects and discomfort for the patients. The temporary inhibition of salivary secretion in the post-operative period could enable a reduction in saliva-related local complications, in the incidence of oro-cutaneous fistulas, and improve the outcome of the surgery as well as the quality of residual life in these patients.

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Outfall Points, Region 9, 2012, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for waste water treatment plants which generally represent the site of the discharge....

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Outfall Points, Region 9, 2007, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for waste water treatment plants which generally represent the site of the discharge....

National Pollution Discharge Elimination System (NPDES) Wastewater Treatment Plant Outfall Points, Region 9, 2011, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — Point geospatial dataset representing locations of NPDES outfalls/dischargers for waste water treatment plants which generally represent the site of the discharge....

The Sun-Earth saddle point: characterization and opportunities to test general relativity

Science.gov (United States)

Topputo, Francesco; Dei Tos, Diogene A.; Rasotto, Mirco; Nakamiya, Masaki

2018-04-01

The saddle points are locations where the net gravitational accelerations balance. These regions are gathering more attention within the astrophysics community. Regions about the saddle points present clean, close-to-zero background acceleration environments where possible deviations from General Relativity can be tested and quantified. Their location suggests that flying through a saddle point can be accomplished by leveraging highly nonlinear orbits. In this paper, the geometrical and dynamical properties of the Sun-Earth saddle point are characterized. A systematic approach is devised to find ballistic orbits that experience one or multiple passages through this point. A parametric analysis is performed to consider spacecraft initially on L_{1,2} Lagrange point orbits. Sun-Earth saddle point ballistic fly-through trajectories are evaluated and classified for potential use. Results indicate an abundance of short-duration, regular solutions with a variety of characteristics.

AMCO Scribe Sampling Data Points, Oakland CA, 2017, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This feature class contains points depicting archived sampling data for Vinyl Chloride, Trichloroethene (TCE), and Tetrachloroethene (PCE) for the R09 AMCO-OTIE...

Critical points in magnetic systems

International Nuclear Information System (INIS)

Bongaarts, A.L.M.

1975-01-01

The magnetical phase transitions of CsCoCl 3 .2H 2 O and CsCoCl 3 .2D 2 O are investigated by neutron diffraction techniques with special attention to the critical points in the phase diagrams. CsCoCl 3 .2H 2 O turned out to be a one-dimentional magnetic antiferromagnet with ferromagnetic and antiferromagnetic interactions. In the vicinity of the Neel point, the critical behavior in zero magnetic field could be described as a three-dimentional long range ordering, while the fluctuations in the system are one-dimensional. In the presence of a magnetic field, the behavior of the system in the critical region of the magnetic phase diagram between the Neel temperature at zero field (3.3degK) and 1.85degK, was in good agreement with the theory. Below 1.85degK, the phase transition in a magnetic field changes into a line of triple points whose end point could be identified as a tricritical point, i.e., an intersection of three critical lines. The parameters derived from observations in the neighborhood of this tricritical point obey the scaling laws but are not in numerical agreement with theoretical predictions

Impact of ambiguity resolution and application of transformation parameters obtained by regional GNSS network in Precise Point Positioning

Science.gov (United States)

Gandolfi, S.; Poluzzi, L.; Tavasci, L.

2012-12-01

Precise Point Positioning (PPP) is one of the possible approaches for GNSS data processing. As known this technique is faster and more flexible compared to the others which are based on a differenced approach and constitute a reliable methods for accurate positioning of remote GNSS stations, even in some remote area such as Antarctica. Until few years ago one of the major limits of the method was the impossibility to resolve the ambiguity as integer but nowadays many methods are available to resolve this aspect. The first software package permitting a PPP solution was the GIPSY OASIS realized, developed and maintained by JPL (NASA). JPL produce also orbits and files ready to be used with GIPSY. Recently, using these products came possible to resolve ambiguities improving the stability of solutions. PPP permit to estimate position into the reference frame of the orbits (IGS) and when coordinate in others reference frames, such al ITRF, are needed is necessary to apply a transformation. Within his products JPL offer, for each day, a global 7 parameter transformation that permit to locate the survey into the ITRF RF. In some cases it's also possible to create a costumed process and obtain analogous parameters using local/regional reference network of stations which coordinates are available also in the desired reference frame. In this work some tests on accuracy has been carried out comparing different PPP solutions obtained using the same software packages (GIPSY) but considering the ambiguity resolution, the global and regional transformation parameters. In particular two test area have been considered, first one located in Antarctica and the second one in Italy. Aim of the work is the evaluation of the impact of ambiguity resolution and the use of local/regional transformation parameter in the final solutions. Tests shown how the ambiguity resolution improve the precision, especially in the EAST component with a scattering reduction about 8%. And the use of global

Thermal Investigation in the Cappadocia Region, Central Anatolia-Turkey, Analyzing Curie Point Depth, Geothermal Gradient, and Heat-Flow Maps from the Aeromagnetic Data

Science.gov (United States)

Bilim, Funda; Kosaroglu, Sinan; Aydemir, Attila; Buyuksarac, Aydin

2017-12-01

In this study, curie point depth (CPD), heat flow, geothermal gradient, and radiogenic heat production maps of the Cappadocian region in central Anatolia are presented to reveal the thermal structure from the aeromagnetic data. The large, circular pattern in these maps matches with previously determined shallow (2 km in average) depression. Estimated CPDs in this depression filled with loose volcano-clastics and ignimbrite sheets of continental Neogene units vary from 7 to 12 km, while the geothermal gradient increases from 50 to 68 °C/km. Heat flows were calculated using two different conductivity coefficients of 2.3 and 2.7 Wm-1 K-1. The radiogenic heat production was also obtained between 0.45 and 0.70 μW m-3 in this area. Heat-flow maps were compared with the previous, regional heat-flow map of Turkey and significant differences were observed. In contrast to linear heat-flow increment through the northeast in the previous map in the literature, produced maps in this study include a large, caldera-like circular depression between Nevsehir, Aksaray, Nigde, and Yesilhisar cities indicating high geothermal gradient and higher heat-flow values. In addition, active deformation is evident with young magmatism in the Neogene and Quaternary times and a large volcanic cover on the surface. Boundaries of volcanic eruption centers and buried large intrusions are surrounded with the maxspots of the horizontal gradients of magnetic anomalies. Analytic signal (AS) map pointing-out exact locations of causative bodies is also presented in this study. Circular region in the combined map of AS and maxspots apparently indicates a possible caldera.

Near-real-time regional troposphere models for the GNSS precise point positioning technique

International Nuclear Information System (INIS)

Hadas, T; Kaplon, J; Bosy, J; Sierny, J; Wilgan, K

2013-01-01

The GNSS precise point positioning (PPP) technique requires high quality product (orbits and clocks) application, since their error directly affects the quality of positioning. For real-time purposes it is possible to utilize ultra-rapid precise orbits and clocks which are disseminated through the Internet. In order to eliminate as many unknown parameters as possible, one may introduce external information on zenith troposphere delay (ZTD). It is desirable that the a priori model is accurate and reliable, especially for real-time application. One of the open problems in GNSS positioning is troposphere delay modelling on the basis of ground meteorological observations. Institute of Geodesy and Geoinformatics of Wroclaw University of Environmental and Life Sciences (IGG WUELS) has developed two independent regional troposphere models for the territory of Poland. The first one is estimated in near-real-time regime using GNSS data from a Polish ground-based augmentation system named ASG-EUPOS established by Polish Head Office of Geodesy and Cartography (GUGiK) in 2008. The second one is based on meteorological parameters (temperature, pressure and humidity) gathered from various meteorological networks operating over the area of Poland and surrounding countries. This paper describes the methodology of both model calculation and verification. It also presents results of applying various ZTD models into kinematic PPP in the post-processing mode using Bernese GPS Software. Positioning results were used to assess the quality of the developed models during changing weather conditions. Finally, the impact of model application to simulated real-time PPP on precision, accuracy and convergence time is discussed. (paper)

Application of fixed point theory to chaotic attractors of forced oscillators

International Nuclear Information System (INIS)

Stewart, H.B.

1990-11-01

A review of the structure of chaotic attractors of periodically forced second order nonlinear oscillators suggests that the theory of fixed points of transformations gives information about the fundamental topological structure of attractors. First a simple extension of the Levinson index formula is proved. Then numerical evidence is used to formulate plausible conjectures about absorbing regions containing chaotic attractors in forced oscillators. Applying the Levinson formula suggests a fundamental relation between the number of fixed points or periodic points in a section of the chaotic attractor on the one hand, and a topological invariant of an absorbing region on the other hand. (author)

When Dijkstra Meets Vanishing Point: A Stereo Vision Approach for Road Detection.

Science.gov (United States)

Zhang, Yigong; Su, Yingna; Yang, Jian; Ponce, Jean; Kong, Hui

2018-05-01

In this paper, we propose a vanishing-point constrained Dijkstra road model for road detection in a stereo-vision paradigm. First, the stereo-camera is used to generate the u- and v-disparity maps of road image, from which the horizon can be extracted. With the horizon and ground region constraints, we can robustly locate the vanishing point of road region. Second, a weighted graph is constructed using all pixels of the image, and the detected vanishing point is treated as the source node of the graph. By computing a vanishing-point constrained Dijkstra minimum-cost map, where both disparity and gradient of gray image are used to calculate cost between two neighbor pixels, the problem of detecting road borders in image is transformed into that of finding two shortest paths that originate from the vanishing point to two pixels in the last row of image. The proposed approach has been implemented and tested over 2600 grayscale images of different road scenes in the KITTI data set. The experimental results demonstrate that this training-free approach can detect horizon, vanishing point, and road regions very accurately and robustly. It can achieve promising performance.

Dye visualization near a three-dimensional stagnation point: application to the vortex breakdown bubble

DEFF Research Database (Denmark)

Brøns, Morten; Thompson, M. C.; Hourigan, K.

2009-01-01

flows are typically visualized. Predictions based on the model are made for the steady vortex breakdown bubble in a torsionally driven cylinder and compared with computational fluid dynamics predictions and experimental observations. Previous experimental observations using tracer visualization...... techniques have suggested that even for low-Reynolds-number flows, the steady vortex breakdown bubble in a torsionally driven cylinder is not axisymmetric and has an inflow/outflow asymmetry at its tail. Recent numerical and theoretical studies show that the asymmetry of the vortex breakdown bubble......, and consequently its open nature, can be explained by the very small imperfections that are present in any experimental rig. Distinct from this, here it is shown that even for a perfectly axisymmetric flow and breakdown bubble, the combined effect of dye diffusion and the inevitable small errors in the dye...

The existence of trajectories joining critical points

International Nuclear Information System (INIS)

Yu Shuxiang.

1985-01-01

In this paper, using the notion of an isolating block and the concept of canonical regions, three existence criteria of trajectories connecting a pair of critical points of planar differential equations are given. (author)

Automatic reconstruction of 3D urban landscape by computing connected regions and assigning them an average altitude from LiDAR point cloud image

Science.gov (United States)

Kawata, Yoshiyuki; Koizumi, Kohei

2014-10-01

The demand of 3D city modeling has been increasing in many applications such as urban planing, computer gaming with realistic city environment, car navigation system with showing 3D city map, virtual city tourism inviting future visitors to a virtual city walkthrough and others. We proposed a simple method for reconstructing a 3D urban landscape from airborne LiDAR point cloud data. The automatic reconstruction method of a 3D urban landscape was implemented by the integration of all connected regions, which were extracted and extruded from the altitude mask images. These mask images were generated from the gray scale LiDAR image by the altitude threshold ranges. In this study we demonstrated successfully in the case of Kanazawa city center scene by applying the proposed method to the airborne LiDAR point cloud data.

Streamwise Fluctuations of Vortex Breakdown at High Reynolds Numbers

National Research Council Canada - National Science Library

Connelly, Jonathan S

2006-01-01

This thesis deals with the characterization of the dependence on the flow geometry of the stream wise fluctuations of the stagnation point of vortex breakdown in axisymmetric tubes and over delta wing aircraft...

Property Analysis of the Real-Time Uncalibrated Phase Delay Product Generated by Regional Reference Stations and Its Influence on Precise Point Positioning Ambiguity Resolution

Directory of Open Access Journals (Sweden)

Yong Zhang

2017-05-01

Full Text Available The real-time estimation of the wide-lane and narrow-lane Uncalibrated Phase Delay (UPD of satellites is realized by real-time data received from regional reference station networks; The properties of the real-time UPD product and its influence on real-time precise point positioning ambiguity resolution (RTPPP-AR are experimentally analyzed according to real-time data obtained from the regional Continuously Operating Reference Stations (CORS network located in Tianjin, Shanghai, Hong Kong, etc. The results show that the real-time wide-lane and narrow-lane UPD products differ significantly from each other in time-domain characteristics; the wide-lane UPDs have daily stability, with a change rate of less than 0.1 cycle/day, while the narrow-lane UPDs have short-term stability, with significant change in one day. The UPD products generated by different regional networks have obvious spatial characteristics, thus significantly influencing RTPPP-AR: the adoption of real-time UPD products employing the sparse stations in the regional network for estimation is favorable for improving the regional RTPPP-AR up to 99%; the real-time UPD products of different regional networks slightly influence PPP-AR positioning accuracy. After ambiguities are successfully fixed, the real-time dynamic RTPPP-AR positioning accuracy is better than 3 cm in the plane and 8 cm in the upward direction.

2014 Global Energy Trends: a year full of surprises. Based on its 2014 data for G20 countries, Enerdata analyses the trends in the world energy demand

International Nuclear Information System (INIS)

2015-01-01

According to the 2014 Global Energy Trends publication, Enerdata points out 2014 as a remarkable year with a near stagnation in energy demand and CO_2 emissions despite economic growth. The G20's 2014 Key Energy figures: +3.5% Economic Growth; +0.3% (10.8 Gtep) Energy consumption stagnation; -0.2% (26 GtCO_2) CO_2 emissions stabilizations. The main trends derived from the publication are: - Historical stagnation in energy consumption; - Stabilisation in CO_2 emissions; - Global energy consumption stabilisation is reflected everywhere: - 0 growth for gas, - Fall in coal consumption, - Slight increase in electricity consumption. The Global Energy Trends Analysis also provides additional graphs on such topics as: Coal: most consumed energy source in G20 countries; Oil: 50% fall in international prices; Oil: demand continues to slightly increase; Gas: high impact of climate on gas consumption. (authors)

Counselling and psychotherapy services in more developed and developing regions in China: a comparative investigation of practitioners and current service delivery.

Science.gov (United States)

Qian, Mingyi; Chen, Ruiyun; Chen, Hong; Hu, Sherlyn; Zhong, Jie; Yao, Ping; Yi, Chunli

2012-09-01

Counselling and psychotherapy services have taken off with uneven speed across China since the 1980s after several years of stagnation. Researchers have attributed socioeconomic development (or the lack thereof) and regional differences as main barriers to the development in this field. However, little is known today about the status of counselling and psychotherapy services across China. To investigate and compare the current situation of practitioners and service delivery of counselling and psychotherapy in more developed and developing regions across China. Convenience sampling methods from counselling and psychological services organizations in 29 Chinese provinces, municipalities or autonomous regions were used to recruit 1,543 participants to take part in the investigation by completing a 93-item self-designed questionnaire. Organizations in developing and more developed regions in China varied in their current practices and employment situation of their practitioners, and in the quality of service delivery. However, counselling and psychotherapy offered at universities in both types of regions are of similar quality. In China, the level of socioeconomic development significantly influences the development of professional counselling and psychotherapy services. Important progress is evident in the field; however, the lack of systematic training and the scarcity of professional practitioners remain a challenge.

Stabilization at almost arbitrary points for chaotic systems

International Nuclear Information System (INIS)

Huang, C.-S.; Lian, K.-Y.; Su, C.-H.; Wu, J.-W.

2008-01-01

We consider how to design a feasible control input for chaotic systems via a suitable input channel to achieve the stabilization at arbitrary points. Regarding the nonlinear systems without naturally defined input vectors, we propose a local stabilization controller which works for almost arbitrary points. Subsequently, according to topologically transitive property for chaotic systems, the feedback control force is activated only when the trajectory passes through the neighboring region of the regulated point. Hence the global stabilization is achieved whereas the control effort of the hybrid controller is extremely low

Self-Similarity Based Corresponding-Point Extraction from Weakly Textured Stereo Pairs

Directory of Open Access Journals (Sweden)

Min Mao

2014-01-01

Full Text Available For the areas of low textured in image pairs, there is nearly no point that can be detected by traditional methods. The information in these areas will not be extracted by classical interest-point detectors. In this paper, a novel weakly textured point detection method is presented. The points with weakly textured characteristic are detected by the symmetry concept. The proposed approach considers the gray variability of the weakly textured local regions. The detection mechanism can be separated into three steps: region-similarity computation, candidate point searching, and refinement of weakly textured point set. The mechanism of radius scale selection and texture strength conception are used in the second step and the third step, respectively. The matching algorithm based on sparse representation (SRM is used for matching the detected points in different images. The results obtained on image sets with different objects show high robustness of the method to background and intraclass variations as well as to different photometric and geometric transformations; the points detected by this method are also the complement of points detected by classical detectors from the literature. And we also verify the efficacy of SRM by comparing with classical algorithms under the occlusion and corruption situations for matching the weakly textured points. Experiments demonstrate the effectiveness of the proposed weakly textured point detection algorithm.

Pseudo-dynamic source modelling with 1-point and 2-point statistics of earthquake source parameters

KAUST Repository

Song, S. G.

2013-12-24

Ground motion prediction is an essential element in seismic hazard and risk analysis. Empirical ground motion prediction approaches have been widely used in the community, but efficient simulation-based ground motion prediction methods are needed to complement empirical approaches, especially in the regions with limited data constraints. Recently, dynamic rupture modelling has been successfully adopted in physics-based source and ground motion modelling, but it is still computationally demanding and many input parameters are not well constrained by observational data. Pseudo-dynamic source modelling keeps the form of kinematic modelling with its computational efficiency, but also tries to emulate the physics of source process. In this paper, we develop a statistical framework that governs the finite-fault rupture process with 1-point and 2-point statistics of source parameters in order to quantify the variability of finite source models for future scenario events. We test this method by extracting 1-point and 2-point statistics from dynamically derived source models and simulating a number of rupture scenarios, given target 1-point and 2-point statistics. We propose a new rupture model generator for stochastic source modelling with the covariance matrix constructed from target 2-point statistics, that is, auto- and cross-correlations. Our sensitivity analysis of near-source ground motions to 1-point and 2-point statistics of source parameters provides insights into relations between statistical rupture properties and ground motions. We observe that larger standard deviation and stronger correlation produce stronger peak ground motions in general. The proposed new source modelling approach will contribute to understanding the effect of earthquake source on near-source ground motion characteristics in a more quantitative and systematic way.

From Pixels to Region: A Salient Region Detection Algorithm for Location-Quantification Image

Directory of Open Access Journals (Sweden)

Mengmeng Zhang

2014-01-01

Full Text Available Image saliency detection has become increasingly important with the development of intelligent identification and machine vision technology. This process is essential for many image processing algorithms such as image retrieval, image segmentation, image recognition, and adaptive image compression. We propose a salient region detection algorithm for full-resolution images. This algorithm analyzes the randomness and correlation of image pixels and pixel-to-region saliency computation mechanism. The algorithm first obtains points with more saliency probability by using the improved smallest univalue segment assimilating nucleus operator. It then reconstructs the entire saliency region detection by taking these points as reference and combining them with image spatial color distribution, as well as regional and global contrasts. The results for subjective and objective image saliency detection show that the proposed algorithm exhibits outstanding performance in terms of technology indices such as precision and recall rates.

Numerical analysis of jet impingement heat transfer at high jet Reynolds number and large temperature difference

DEFF Research Database (Denmark)

Jensen, Michael Vincent; Walther, Jens Honore

2013-01-01

was investigated at a jet Reynolds number of 1.66 × 105 and a temperature difference between jet inlet and wall of 1600 K. The focus was on the convective heat transfer contribution as thermal radiation was not included in the investigation. A considerable influence of the turbulence intensity at the jet inlet...... to about 100% were observed. Furthermore, the variation in stagnation point heat transfer was examined for jet Reynolds numbers in the range from 1.10 × 105 to 6.64 × 105. Based on the investigations, a correlation is suggested between the stagnation point Nusselt number, the jet Reynolds number......, and the turbulence intensity at the jet inlet for impinging jet flows at high jet Reynolds numbers. Copyright © 2013 Taylor and Francis Group, LLC....

Crystallite-conjugation regions in polycrystalline transition and noble metals. 1. Composition and properties of point defects in the cores of crystallite-conjugation regions in polycrystalline Cr, Ta and W

International Nuclear Information System (INIS)

Klotsman, S.M.; Kajgorodov, V.N.; Ermakov, A.V.; Rudenko, V.K.

2004-01-01

With the use of available results of theoretical investigations on structure and properties of crystallite conjugation regions (CCR) the types and relaxation volumes of point defects arising in a core of the CCR of polycrystalline Ta, W and Cr after vacuum annealing (10 -6 - 10 -5 torr) are determined. Temperature dependences are studied for isomer shifts δ 1 and δ 2 of -1 and -2 components of emission spectra of NGR-irradiation 57 Co( 57 Fe) atomic probes localized in a core of the CCR and in adjacent zones of the lattice of polycrystalline solid solutions of O(Ta), O(W) and O(Cr). A comparison of the dependences obtained is carried and the specific features observed are explained for O(Cr) [ru

Bifurcations and degenerate periodic points in a three dimensional chaotic fluid flow

International Nuclear Information System (INIS)

Smith, L. D.; Rudman, M.; Lester, D. R.; Metcalfe, G.

2016-01-01

Analysis of the periodic points of a conservative periodic dynamical system uncovers the basic kinematic structure of the transport dynamics and identifies regions of local stability or chaos. While elliptic and hyperbolic points typically govern such behaviour in 3D systems, degenerate (parabolic) points also play an important role. These points represent a bifurcation in local stability and Lagrangian topology. In this study, we consider the ramifications of the two types of degenerate periodic points that occur in a model 3D fluid flow. (1) Period-tripling bifurcations occur when the local rotation angle associated with elliptic points is reversed, creating a reversal in the orientation of associated Lagrangian structures. Even though a single unstable point is created, the bifurcation in local stability has a large influence on local transport and the global arrangement of manifolds as the unstable degenerate point has three stable and three unstable directions, similar to hyperbolic points, and occurs at the intersection of three hyperbolic periodic lines. The presence of period-tripling bifurcation points indicates regions of both chaos and confinement, with the extent of each depending on the nature of the associated manifold intersections. (2) The second type of bifurcation occurs when periodic lines become tangent to local or global invariant surfaces. This bifurcation creates both saddle–centre bifurcations which can create both chaotic and stable regions, and period-doubling bifurcations which are a common route to chaos in 2D systems. We provide conditions for the occurrence of these tangent bifurcations in 3D conservative systems, as well as constraints on the possible types of tangent bifurcation that can occur based on topological considerations.

Fast space travel by vacuum zero-point field perturbations

International Nuclear Information System (INIS)

Froning, H. D. Jr.

1999-01-01

Forces acting upon an accelerating vehicle that is 'warping' its surrounding space are estimated, using the techniques of computational gas/fluid dynamics. Disturbances corresponding to perturbation of spacetime metric and vacuum zero-point fields by electromagnetic discharges are modeled as changes in the electric permittivity and magnetic permeability characteristics of the vacuum of space. And it is assumed that resistance to acceleration (vehicle inertia) is, in part, a consequence of zero-point radiation pressure field anisotropy in the warped space region surrounding the craft. The paper shows that resistance to vehicle acceleration can be diminished by spacetime warping that increases light propagation speed within the warped region. If sufficient warping is achieved, ship speed is slower than light speed within the region that surrounds it-even if it is moving faster-than-light with respect to earth

Electric conductivity of alkali metal vapors in the region of critical point

International Nuclear Information System (INIS)

Likal'ter, A.A.

1982-01-01

A behaviour of alkali metal conductivity in the vicinity of a critical point has been analyzed on the base of deVeloped representations on a vapor state. A phenomenological conductivity theory has been developed, which is in a good agreement with experimental data obtained

Synchrotron radiation phase-contrast X-ray CT imaging of acupuncture points

Energy Technology Data Exchange (ETDEWEB)

Zhang, Dongming; Yan, Xiaohui; Zhang, Xinyi [Fudan University, Synchrotron Radiation Research Center, State Key Laboratory of Surface Physics and Department of Physics, Shanghai (China); Liu, Chenglin [Physics Department of Yancheng Teachers' College, Yancheng (China); Dang, Ruishan [The Second Military Medical University, Shanghai (China); Xiao, Tiqiao [Chinese Academy of Sciences, Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, Shanghai (China); Zhu, Peiping [Chinese Academy of Sciences, Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Beijing (China)

2011-08-15

Three-dimensional (3D) topographic structures of acupuncture points were investigated by using synchrotron radiation in-line X-ray phase contrast computerized tomography. Two acupuncture points, named Zhongji (RN3) and Zusanli (ST36), were studied. We found an accumulation of microvessels at each acupuncture point region. Images of the tissues surrounding the acupuncture points do not show such kinds of structure. This is the first time that 3D images have revealed the specific structures of acupuncture points. (orig.)

Synchrotron radiation phase-contrast X-ray CT imaging of acupuncture points

International Nuclear Information System (INIS)

Zhang, Dongming; Yan, Xiaohui; Zhang, Xinyi; Liu, Chenglin; Dang, Ruishan; Xiao, Tiqiao; Zhu, Peiping

2011-01-01

Three-dimensional (3D) topographic structures of acupuncture points were investigated by using synchrotron radiation in-line X-ray phase contrast computerized tomography. Two acupuncture points, named Zhongji (RN3) and Zusanli (ST36), were studied. We found an accumulation of microvessels at each acupuncture point region. Images of the tissues surrounding the acupuncture points do not show such kinds of structure. This is the first time that 3D images have revealed the specific structures of acupuncture points. (orig.)

Regional inequalities in mortality.

OpenAIRE

Illsley, R; Le Grand, J

1993-01-01

STUDY OBJECTIVE--To examine the hypothesis of sustained and persistent inequalities in health between British regions and to ask how far they are a consequence of using standardised mortality ratios as the tool of measurement. DESIGN, SETTING AND PARTICIPANTS--Data are regional, age specific death rates at seven points in time from 1931 to 1987-89 for the British regions, reconstructed to make them comparable with the 1981 regional definitions. Log variance is used to measure inequality; regi...

An Evolutionary Approach to Regional Systems of Innovation

DEFF Research Database (Denmark)

Gunnarsson, Jan Sture Gunnar; Wallin, Torsten

This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces and product......This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces...

An evolutionary approach to regional systems of innovation

DEFF Research Database (Denmark)

Gunnarsson, Jan Sture Gunnar; Wallin, Torsten

2011-01-01

This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces and product......This article examines how the birth and the development of regional systems of innovation are connected with economic selection and points to implications for regional-level policies. The research questions are explored using an evolutionary model, which emphasises geographical spaces...

Detecting corner points from digital curves

International Nuclear Information System (INIS)

Sarfraz, M.

2011-01-01

Corners in digital images give important clues for shape representation, recognition, and analysis. Since dominant information regarding shape is usually available at the corners, they provide important features for various real life applications in the disciplines like computer vision, pattern recognition, computer graphics. Corners are the robust features in the sense that they provide important information regarding objects under translation, rotation and scale change. They are also important from the view point of understanding human perception of objects. They play crucial role in decomposing or describing the digital curves. They are also used in scale space theory, image representation, stereo vision, motion tracking, image matching, building mosaics and font designing systems. If the corner points are identified properly, a shape can be represented in an efficient and compact way with sufficient accuracy. Corner detection schemes, based on their applications, can be broadly divided into two categories: binary (suitable for binary images) and gray level (suitable for gray level images). Corner detection approaches for binary images usually involve segmenting the image into regions and extracting boundaries from those regions that contain them. The techniques for gray level images can be categorized into two classes: (a) Template based and (b) gradient based. The template based techniques utilize correlation between a sub-image and a template of a given angle. A corner point is selected by finding the maximum of the correlation output. Gradient based techniques require computing curvature of an edge that passes through a neighborhood in a gray level image. Many corner detection algorithms have been proposed in the literature which can be broadly divided into two parts. One is to detect corner points from grayscale images and other relates to boundary based corner detection. This contribution mainly deals with techniques adopted for later approach

Analysis of high-resolution simulations for the Black Forest region from a point of view of tourism climatology - a comparison between two regional climate models (REMO and CLM)

Science.gov (United States)

Endler, Christina; Matzarakis, Andreas

2011-03-01

An analysis of climate simulations from a point of view of tourism climatology based on two regional climate models, namely REMO and CLM, was performed for a regional domain in the southwest of Germany, the Black Forest region, for two time frames, 1971-2000 that represents the twentieth century climate and 2021-2050 that represents the future climate. In that context, the Intergovernmental Panel on Climate Change (IPCC) scenarios A1B and B1 are used. The analysis focuses on human-biometeorological and applied climatologic issues, especially for tourism purposes - that means parameters belonging to thermal (physiologically equivalent temperature, PET), physical (precipitation, snow, wind), and aesthetic (fog, cloud cover) facets of climate in tourism. In general, both models reveal similar trends, but differ in their extent. The trend of thermal comfort is contradicting: it tends to decrease in REMO, while it shows a slight increase in CLM. Moreover, REMO reveals a wider range of future climate trends than CLM, especially for sunshine, dry days, and heat stress. Both models are driven by the same global coupled atmosphere-ocean model ECHAM5/MPI-OM. Because both models are not able to resolve meso- and micro-scale processes such as cloud microphysics, differences between model results and discrepancies in the development of even those parameters (e.g., cloud formation and cover) are due to different model parameterization and formulation. Climatic changes expected by 2050 are small compared to 2100, but may have major impacts on tourism as for example, snow cover and its duration are highly vulnerable to a warmer climate directly affecting tourism in winter. Beyond indirect impacts are of high relevance as they influence tourism as well. Thus, changes in climate, natural environment, demography, tourists' demands, among other things affect economy in general. The analysis of the CLM results and its comparison with the REMO results complete the analysis performed

Numerical conformal mapping and its inverse of unbounded multiply connected regions onto logarithmic spiral slit regions and straight slit regions.

Science.gov (United States)

Yunus, A A M; Murid, A H M; Nasser, M M S

2014-02-08

This paper presents a boundary integral equation method with the adjoint generalized Neumann kernel for computing conformal mapping of unbounded multiply connected regions and its inverse onto several classes of canonical regions. For each canonical region, two integral equations are solved before one can approximate the boundary values of the mapping function. Cauchy's-type integrals are used for computing the mapping function and its inverse for interior points. This method also works for regions with piecewise smooth boundaries. Three examples are given to illustrate the effectiveness of the proposed method.

A simple method for regional cerebral blood flow measurement by one-point arterial blood sampling and 123I-IMP microsphere model (part 2). A study of time correction of one-point blood sample count

International Nuclear Information System (INIS)

Masuda, Yasuhiko; Makino, Kenichi; Gotoh, Satoshi

1999-01-01

In our previous paper regarding determination of the regional cerebral blood flow (rCBF) using the 123 I-IMP microsphere model, we reported that the accuracy of determination of the integrated value of the input function from one-point arterial blood sampling can be increased by performing correction using the 5 min: 29 min ratio for the whole-brain count. However, failure to carry out the arterial blood collection at exactly 5 minutes after 123 I-IMP injection causes errors with this method, and there is thus a time limitation. We have now revised out method so that the one-point arterial blood sampling can be performed at any time during the interval between 5 minutes and 20 minutes after 123 I-IMP injection, with addition of a correction step for the sampling time. This revised method permits more accurate estimation of the integral of the input functions. This method was then applied to 174 experimental subjects: one-point blood samples collected at random times between 5 and 20 minutes, and the estimated values for the continuous arterial octanol extraction count (COC) were determined. The mean error rate between the COC and the actual measured continuous arterial octanol extraction count (OC) was 3.6%, and the standard deviation was 12.7%. Accordingly, in 70% of the cases, the rCBF was able to be estimated within an error rate of 13%, while estimation was possible in 95% of the cases within an error rate of 25%. This improved method is a simple technique for determination of the rCBF by 123 I-IMP microsphere model and one-point arterial blood sampling which no longer shows a time limitation and does not require any octanol extraction step. (author)

Aspects Referring Wind Energy Integration from the Power System Point of View in the Region of Southeast Europe. Study Case of Romania

Directory of Open Access Journals (Sweden)

Simona-Vasilica Oprea

2018-01-01

Full Text Available Wind energy integration is a complex target that could refer to different aspects such as: grid capacity; power system; support scheme; environmental; social issues; etc. It is probably the less predictable renewable energy sources (RES due to its high volatility being difficult to be securely integrated into the power systems. This paper will focus on the wind energy integration from the power system point of view, emphasizing the case of Romania. Before going into the Romanian case, the paper analyzes the potential benefits of the regional approach in terms of power system integration, revealing that it can bring significant advantages by reducing the required power reserves or increasing wind power plants (WPP generation. Currently, the power system integration is one of the major obstacle to large scale wind energy penetration in the region of Southeast (SE Europe with high wind energy potential. The results of our research consist in proposing a model for estimating the balancing reserves sharing at regional level, comparing regional to country-by-country approach in terms of the power reserve requirements for balancing the operation of WPP. It definitely reveals that by regional Transmission System Operators (TSO coordination; less reserves are needed; therefore, the space for RES enlarges. We also propose a model for Romanian power system that is able to calculate the installed power of WPP that could operate without considerable interruptions. Also, the model estimates the additional power reserves required for larger wind energy integration. This perspective can provide interesting insights on what should be foreseen as reasonable behavior of the policy makers and investors.

DNA barcode analysis of butterfly species from Pakistan points towards regional endemism.

Science.gov (United States)

Ashfaq, Muhammad; Akhtar, Saleem; Khan, Arif M; Adamowicz, Sarah J; Hebert, Paul D N

2013-09-01

DNA barcodes were obtained for 81 butterfly species belonging to 52 genera from sites in north-central Pakistan to test the utility of barcoding for their identification and to gain a better understanding of regional barcode variation. These species represent 25% of the butterfly fauna of Pakistan and belong to five families, although the Nymphalidae were dominant, comprising 38% of the total specimens. Barcode analysis showed that maximum conspecific divergence was 1.6%, while there was 1.7-14.3% divergence from the nearest neighbour species. Barcode records for 55 species showed Barcode of Life Data Systems (BOLD), but only 26 of these cases involved specimens from neighbouring India and Central Asia. Analysis revealed that most species showed little incremental sequence variation when specimens from other regions were considered, but a threefold increase was noted in a few cases. There was a clear gap between maximum intraspecific and minimum nearest neighbour distance for all 81 species. Neighbour-joining cluster analysis showed that members of each species formed a monophyletic cluster with strong bootstrap support. The barcode results revealed two provisional species that could not be clearly linked to known taxa, while 24 other species gained their first coverage. Future work should extend the barcode reference library to include all butterfly species from Pakistan as well as neighbouring countries to gain a better understanding of regional variation in barcode sequences in this topographically and climatically complex region. © 2013 The Authors. Molecular Ecology Resources published by John Wiley & Sons Ltd.

Assessment of Non-Point Source Total Phosphorus Pollution from Different Land Use and Soil Types in a Mid-High Latitude Region of China

Directory of Open Access Journals (Sweden)

Zhiwei Wang

2016-11-01

Full Text Available The transport characteristics of phosphorus in soil and the assessment of its environmental risk have become hot topics in the environmental and agricultural fields. The Sanjiang Plain is an important grain production base in China, and it is characterised by serious land use change caused by large-scale agricultural exploitation. Agricultural inputs and tillage management have destroyed the soil nutrient balance formed over long-term conditions. There are few studies on non-point source phosphorus pollution in the Sanjiang Plain, which is the largest swampy low plain in a mid-high-latitude region in China. Most studies have focused on the water quality of rivers in marsh areas, or the export mechanism of phosphorus from specific land uses. They were conducted using experimental methods or empirical models, and need further development towards mechanism models and the macro-scale. The question is how to find a way to couple processes in phosphorus cycling and a distributed hydrological model considering local hydrological features. In this study, we report an attempt to use a distributed phosphorus transport model to analyse non-point source total phosphorus pollution from different land uses and soil types on the Sanjiang Plain. The total phosphorus concentration generally shows an annually increasing trend in the study area. The total phosphorus load intensity is heterogeneous in different land use types and different soil types. The average total phosphorus load intensity of different land use types can be ranked in descending order from paddy field, dry land, wetlands, grassland, and forestland. The average total phosphorus load intensity of different soil types can be ranked in descending order: paddy soil, bog soil, planosol, meadow soil, black soil, and dark brown earth. The dry land and paddy fields account for the majority of total phosphorus load in the study area. This is mainly caused by extensive use of phosphate fertilizer on the

AMCO Construction Phase Air Monitoring Points, Oakland CA, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This feature class contains points depicting locations of air monitor sensors during the construction phase of the EPA non-time critical removal action (NTCRA) at...

Critical point phenomena: universal physics at large length scales

International Nuclear Information System (INIS)

Bruce, A.; Wallace, D.

1993-01-01

This article is concerned with the behaviour of a physical system at, or close to, a critical point (ebullition, ferromagnetism..): study of the phenomena displayed in the critical region (Ising model, order parameter, correlation length); description of the configurations (patterns) formed by the microscopic degrees of freedom near a critical point, essential concepts of the renormalization group (coarse-graining, system flow, fixed-point and scale-invariance); how these concepts knit together to form the renormalization group method; and what kind of problems may be resolved by the renormalization group method. 12 figs., 1 ref

Beyond new vaccine introduction: the uptake of pneumococcal conjugate vaccine in the African Region.

Science.gov (United States)

Olayinka, Folake; Ewald, Leah; Steinglass, Robert

2017-01-01

The number of vaccines available to low-income countries has increased dramatically over the last decade. Overall infant immunization coverage in the WHO African region has stagnated in the past few years while countries' ability to maintain high immunization coverage rates following introduction of new vaccines has been uneven. This case study examines post-introduction coverage among African countries that introduced PCV between 2008 and 2013 and the factors affecting Pneumococcal Conjugate Vaccine (PCV) introduction. Nearly one-third of countries did not achieve 80% infant PCV3 coverage by two years post-introduction and 58% of countries experienced a decline in coverage between post introduction years two and four. Major factors affecting coverage rates included introduction without adequate preparation, insufficient supply chain capacity and management, poor communication between organizations and with the public, and data collection systems that were insufficient to meet information needs. Deliberately addressing these issues as well as longstanding weaknesses during new vaccine introduction can strengthen the immunization and broader health system. Further study is required to identify and address factors that affect maintenance of high coverage following introduction of new vaccines in the African region. Immunization with PCV is one of the most important interventions protecting against pneumonia, the second leading cause of death for children under five globally.

["Point by point" approach to structure-function correlation of glaucoma on the ganglion cell complex in the posterior pole].

Science.gov (United States)

Zeitoun, M

2017-01-01

To try to establish a "point by point" relationship between the local thickness of the retinal ganglion cell complex and its sensitivity. In total, 104 glaucomatous eyes of 89 patients with a confirmed 24-2 visual field, were measured by superimposing the visual field, using imaging software, with the Wide 40° by 30° measurements of retinal ganglion cell complex obtained from the Topcon © 3D 2000 OCT, after upward adjustment, inversion and scaling. Visual fields were classified into two groups according to the extent of the disease: 58 mild to moderate (MD up to -12dB), and 46 severe (MD beyond -12dB). The 6mm by 6mm central region, equipped with a normative database, was studied, corresponding to 16 points in the visual field. These points were individually matched one by one to the local ganglion cell complex, which was classified into 2 groups depending on whether it was greater or less than 70 microns. The normative database confirmed the pathological nature of the thin areas, with a significance of 95 to 99%. Displacement of central retinal ganglion cells was compensated for. Of 1664 points (16 central points for 104 eyes), 283 points were found to be "borderline" and excluded. Of the 1381 analyzed points, 727 points were classified as "over 70 microns" and 654 points "under 70 microns". (1) For all stages combined, 85.8% of the 727 points which were greater than 70 microns had a deviation between -3 and +3dB: areas above 70 microns had no observable loss of light sensitivity. (2) In total, 92.5% of the 428 points having a gap ranging from -6 to -35dB were located on ganglion cell complex areas below 70 microns: functional visual loss was identified in thin areas, which were less than 70 microns. (3) Areas which were less than 70 microns, that is 654 points, had quite variable sensitivity and can be divided into three groups: the first with preserved sensitivity, another with obliterated sensitivity, and an intermediate group connecting

Survey of billing and coding for counterstrain tender points.

Science.gov (United States)

Snider, Karen T; Johnson, Jane C

2012-06-01

The names of certain counterstrain tender points are incongruent with their physical locations because of an assumption that these points are reflective of dysfunction in neighboring body areas. Because the body area that is physically examined does not always match the body region in which somatic dysfunction is diagnosed for these tender points, it is not always clear which evaluation and management service codes should be used for billing physician services. To assess the attitudes of osteopathic physicians toward the billing and coding of incongruent counterstrain tender points. Physician members of the American Academy of Osteopathy who use counterstrain in clinical practice were surveyed regarding the body area that they would physically examine when assessing for incongruent tender points and, if tender points were present, the body regions to which they would assign somatic dysfunction for billing and coding purposes. Physician responses were categorized as indicating a structural approach (ie, reflective of anatomic location) or a functional approach (ie, reflective of dysfunction in neighboring body areas) to tender point examination and treatment. Associations between sex, specialty, and years in practice with the approach chosen were also examined. Of 175 physicians who responded to the survey, 156 met the study criteria. Respondents were primarily board-certified in neuromusculoskeletal medicine/osteopathic manipulative medicine (98 [63%]), special proficiency in osteopathic manipulative medicine (30 [19%]), or family practice/family practice and osteopathic manipulative treatment (94 [60%]). Ninety percent of physicians predominantly chose responses indicating a structural approach to the physical examination of tender points and 21% predominantly chose responses indicating a functional approach to somatic dysfunction diagnosis. There were inconsistencies among individual respondents regarding the type of approach chosen for a single tender point. For

Real-time simulation of response to load variation for a ship reactor based on point-reactor double regions and lumped parameter model

Energy Technology Data Exchange (ETDEWEB)

Wang Qiao; Zhang De [Department of Nuclear Energy Science and Engineering, Naval University of Engineering, Wuhan 430033 (China); Chen Wenzhen, E-mail: Cwz2@21cn.com [Department of Nuclear Energy Science and Engineering, Naval University of Engineering, Wuhan 430033 (China); Chen Zhiyun [Department of Nuclear Energy Science and Engineering, Naval University of Engineering, Wuhan 430033 (China)

2011-05-15

Research highlights: > We calculate the variation of main parameters of the reactor core by the Simulink. > The Simulink calculation software (SCS) can deal well with the stiff problem. > The high calculation precision is reached with less time, and the results can be easily displayed. > The quick calculation of ship reactor transient can be achieved by this method. - Abstract: Based on the point-reactor double regions and lumped parameter model, while the nuclear power plant second loop load is increased or decreased quickly, the Simulink calculation software (SCS) is adopted to calculate the variation of main physical and thermal-hydraulic parameters of the reactor core. The calculation results are compared with those of three-dimensional simulation program. It is indicated that the SCS can deal well with the stiff problem of the point-reactor kinetics equations and the coupled problem of neutronics and thermal-hydraulics. The high calculation precision can be reached with less time, and the quick calculation of parameters of response to load disturbance for the ship reactor can be achieved. The clear image of the calculation results can also be displayed quickly by the SCS, which is very significant and important to guarantee the reactor safety operation.

Four points function fitted and first derivative procedure for determining the end points in potentiometric titration curves: statistical analysis and method comparison.

Science.gov (United States)

Kholeif, S A

2001-06-01

A new method that belongs to the differential category for determining the end points from potentiometric titration curves is presented. It uses a preprocess to find first derivative values by fitting four data points in and around the region of inflection to a non-linear function, and then locate the end point, usually as a maximum or minimum, using an inverse parabolic interpolation procedure that has an analytical solution. The behavior and accuracy of the sigmoid and cumulative non-linear functions used are investigated against three factors. A statistical evaluation of the new method using linear least-squares method validation and multifactor data analysis are covered. The new method is generally applied to symmetrical and unsymmetrical potentiometric titration curves, and the end point is calculated using numerical procedures only. It outperforms the "parent" regular differential method in almost all factors levels and gives accurate results comparable to the true or estimated true end points. Calculated end points from selected experimental titration curves compatible with the equivalence point category of methods, such as Gran or Fortuin, are also compared with the new method.

A jelenlegi állapot északbácska 8 községében a 2oo9 – es népességmegtartó gazdaság fejlesztési forgatókönyvünk és foglalkoztatottsági pronózisunk tükrében (The Current State of 8 Communities in the Region North Bacska in the Light of Economic Development and Population Retention Scenario for 2009

Directory of Open Access Journals (Sweden)

Sándor Somogyi

2017-07-01

Full Text Available We had in 2010 a report to HSSV (Hungarian Scientific Society of Vojvodina on development scenarios and employment forecast. The report and the conclusions are still valid. The development problems today are also current for Hungarian minorities who lives in Vojvodina. We recognized that number of model has limitations to treat region as complex system and to characterize the future behavior. Therefore, we used a combination of a direct questionnaires and an expert scenarioassessment method. We accepted that the most likely to achieve an economic development, which is strongly reflected in the role of the agricultural sector a certain level of small and medium-sized enterprises and remains a particular operation and stagnation. This indicates that this region of the endogenous levels of forces is not sufficient to form the engine of development. The economic development analyzes had indicated that the projections about the number of employees can be very important. The number of employees we could provide 22-year data series, which allowed the use of prognostic models. For making the forecast we used the SPSS ARIMA models. The forecasted results are based well by the R2 indicator. The employment forecasts and possible scenarios of economic development are also point in the same direction, the region's communities, but also Vojvodina and Serbia, has to take urgent measures to make further progress, to prevent the region's falling behind.

Bridging regional innovation

DEFF Research Database (Denmark)

Hansen, Teis

2013-01-01

to assess the progress of integration in the regions, as well as the effect of cross-border innovation policies. Consequently, important questions are left unanswered, including the central research question of this paper: does the sudden removal of significant physical barriers directly impacts......The topics of regional innovation systems (RIS) and cross-border regions attract increasing attention, but few studies combine the themes. Further, the existing empirical studies of cross-border innovation and knowledge creation analyse one case at one point in time, thus, making it difficult...... collaboration activity in cross-border innovation systems? This paper examines regional integration in the Oresund Region over time. It deals with a specific part of the RIS, as it analyses research collaboration between actors from the Danish and Swedish sides, with a specific emphasis on the biotech industry...

Optical identifications of IRAS point sources: the Fornax, Hydra I and Coma clusters

International Nuclear Information System (INIS)

Wang, G.; Leggett, S.K.; Savage, A.

1991-01-01

We present optical identifications for 66 IRAS point sources in the region of the Fornax cluster of galaxies, 106 IRAS point sources in the region of the Hydra I cluster of galaxies (Abell 1060) and 59 IRAS point sources in the region of the Coma cluster of galaxies (Abell 1656). Eight other sources in Hydra I do not have optical counterparts and are very probably due to infrared cirrus. Twenty-three (35 per cent) of the Fornax sources are associated with stars and 43 (65 per cent) with galaxies; 48 (42 per cent) of the Hydra I sources are associated with stars and 58 (51 per cent) with galaxies; 18 (31 per cent) of the Coma sources are associated with stars and 41 (69 per cent) with galaxies. The stellar and infrared cirrus surface density is consistent with the galactic latitude of each field. (author)

Variational estimates of point-kinetics parameters

International Nuclear Information System (INIS)

Favorite, J.A.; Stacey, W.M. Jr.

1995-01-01

Variational estimates of the effect of flux shifts on the integral reactivity parameter of the point-kinetics equations and on regional power fractions were calculated for a variety of localized perturbations in two light water reactor (LWR) model problems representing a small, tightly coupled core and a large, loosely coupled core. For the small core, the flux shifts resulting from even relatively large localized reactivity changes (∼600 pcm) were small, and the standard point-kinetics approximation estimates of reactivity were in error by only ∼10% or less, while the variational estimates were accurate to within ∼1%. For the larger core, significant (>50%) flux shifts occurred in response to local perturbations, leading to errors of the same magnitude in the standard point-kinetics approximation of the reactivity worth. For positive reactivity, the error in the variational estimate of reactivity was only a few percent in the larger core, and the resulting transient power prediction was 1 to 2 orders of magnitude more accurate than with the standard point-kinetics approximation. For a large, local negative reactivity insertion resulting in a large flux shift, the accuracy of the variational estimate broke down. The variational estimate of the effect of flux shifts on reactivity in point-kinetics calculations of transients in LWR cores was found to generally result in greatly improved accuracy, relative to the standard point-kinetics approximation, the exception being for large negative reactivity insertions with large flux shifts in large, loosely coupled cores

Treatment of Myofascial Trigger Points of Pelvic Floor with Physiotherapeutic Package: A Case Report

Directory of Open Access Journals (Sweden)

Esmaeil Shokri

2015-03-01

Full Text Available Background: There are various factors that may cause pain and dysfunction in the pelvic region. Myofascial trigger points can likewise contribute in pelvic pain. Common treatments for myofascial trigger points include electrotherapy, laser therapy, massage, ischemic compression, dry-needling, stretch, icing, heating, and biofeedback. Case Report: A 26 year old man with an exertion-related pain that lasted 5 months was referred for physiotherapy consultation. He had no pain at rest but reported a referral pain from perineal region to the anus and muscular stiffness following a bout of physical activity. On palpation there was a trigger point in the perineal region with referral pain to anus. At the beginning of the treatment, the patient was asked to stop his physical activities. The patient received a treatment package which was useful in the management of trigger points. After 7 sessions of treatment the pain was diminished and there was no exercise induced stiffness. The patient was followed for 10 months later and no pain and stiffness was reported. Conclusion: The application of heat, friction massage, stretching, combined with endurance exercise could be an effective treatment for reliving the pain and muscular stiffness caused by trigger points.

Deposition of heated whey proteins on a chromium oxide surface.

NARCIS (Netherlands)

Jeurnink, Th.; Verheul, M.; Cohen Stuart, M.A.; Kruif, de C.G.

1996-01-01

Whey protein solutions were given different heat treatments after which their deposition on a chromium oxide surface (the outer layer of stainless steel) was measured by reflectometry. The deposition was studied under controlled flow conditions by using a stagnation point flow configuration. The

Regional Mc parity: do common pricing points reduce deviations from the law of one price?

OpenAIRE

Mathä, Thomas Y.

2009-01-01

Abstract This paper analyses price differences of McDonald?s products in four different countries. I show that pricing at pricing points in different currencies may contribute to explaining deviations from the law of one price. Observing strictly equal prices is more probable if prices are set at psychological and fractional pricing points in a common currency. The latter is also found to reduce the size of price deviations. Additionally, price differences increase as transaction c...

Identifying three-dimensional nested groundwater flow systems in a Tóthian basin

Science.gov (United States)

Wang, Xu-Sheng; Wan, Li; Jiang, Xiao-Wei; Li, Hailong; Zhou, Yangxiao; Wang, Junzhi; Ji, Xiaohui

2017-10-01

Nested groundwater flow systems have been revealed in Tóth's theory as the structural property of basin-scale groundwater circulation but were only well known with two-dimensional (2D) profile models. The method of searching special streamlines across stagnation points for partitioning flow systems, which has been successfully applied in the 2D models, has never been implemented for three-dimensional (3D) Tóthian basins because of the difficulty in solving the dual stream functions. Alternatively, a new method is developed to investigate 3D nested groundwater flow systems without determination of stagnation points. Connective indices are defined to quantify the connection between individual recharge and discharge zones along streamlines. Groundwater circulation cells (GWCCs) are identified according to the distribution of the connective indices and then grouped into local, intermediate and regional flow systems. This method requires existing solution of the flow velocity vector and is implemented via particle tracking technique. It is applied in a hypothetical 3D Tóthian basin with an analytical solution of the flow field and in a real-world basin with a numerical modeling approach. Different spatial patterns of flow systems compared to 2D profile models are found. The outcrops boundaries of GWCCs on water table may significantly deviate from and are not parallel to the nearby water table divides. Topological network is proposed to represent the linked recharge-discharge zones through closed and open GWCCs. Sensitivity analysis indicates that the development of GWCCs depends on the basin geometry, hydraulic parameters and water table shape.

Spatial and temporal variations in non-point source losses of nitrogen and phosphorus in a small agricultural catchment in the Three Gorges Region.

Science.gov (United States)

Chen, Chenglong; Gao, Ming; Xie, Deti; Ni, Jiupai

2016-04-01

Losses of agricultural pollutants from small catchments are a major issue for water quality in the Three Gorges Region. Solutions are urgently needed. However, before pollutant losses can be controlled, information about spatial and temporal variations in pollutant losses is needed. The study was carried out in the Wangjiagou catchment, a small agricultural catchment in Fuling District, Chongqing, and the data about non-point source losses of nitrogen and phosphorus was collected here. Water samples were collected daily by an automatic water sampler at the outlets of two subcatchments from 2012 to 2014. Also, samples of surface runoff from 28 sampling sites distributed through the subcatchments were collected during 12 rainfall events in 2014. A range of water quality variables were analyzed for all samples and were used to demonstrate the variation in non-point losses of nitrogen and phosphorus over a range of temporal and spatial scales and in different types of rainfall in the catchment. Results showed that there was a significant linear correlation between the mass concentrations of total nitrogen (TN) and nitrate (NO3-N) in surface runoff and that the relationship was maintained with changes in time. Concentrations of TN and NO3-N peaked after fertilizer was applied to crops in spring and autumn; concentrations decreased rapidly after the peak values in spring but declined slowly in autumn. N and P concentrations fluctuated more and showed a greater degree of dispersion during the spring crop cultivation period than those in autumn. Concentrations of TN and NO3-N in surface runoff were significantly and positively correlated with the proportion of the area that was planted with corn and mustard tubers, but were negatively correlated with the proportion of the area taken up with rice and mulberry plantations. The average concentrations of TN and NO3-N in surface runoff reached the highest level from the sampling points at the bottom of the land used for corn

Quantum trajectories in complex space: One-dimensional stationary scattering problems

International Nuclear Information System (INIS)

Chou, C.-C.; Wyatt, Robert E.

2008-01-01

One-dimensional time-independent scattering problems are investigated in the framework of the quantum Hamilton-Jacobi formalism. The equation for the local approximate quantum trajectories near the stagnation point of the quantum momentum function is derived, and the first derivative of the quantum momentum function is related to the local structure of quantum trajectories. Exact complex quantum trajectories are determined for two examples by numerically integrating the equations of motion. For the soft potential step, some particles penetrate into the nonclassical region, and then turn back to the reflection region. For the barrier scattering problem, quantum trajectories may spiral into the attractors or from the repellers in the barrier region. Although the classical potentials extended to complex space show different pole structures for each problem, the quantum potentials present the same second-order pole structure in the reflection region. This paper not only analyzes complex quantum trajectories and the total potentials for these examples but also demonstrates general properties and similar structures of the complex quantum trajectories and the quantum potentials for one-dimensional time-independent scattering problems

Numerical study of homogeneous–heterogeneous reactions in Sisko fluid flow past a stretching cylinder

Directory of Open Access Journals (Sweden)

Rabia Malik

2018-03-01

Full Text Available The motivation behind the present study is to focus on the effects of stagnation-point flow and heat transfer to the Sisko fluid past an impermeable stretching cylinder involving convective boundary conditions with homogeneous–heterogeneous reactions. Diffusion coefficients of species A and B are assumed to be of the same size. Also, it is assumed that heat released during chemical reaction is negligible. A system of governing ordinary differential equations is obtained by using suitable transformations which are then solved numerically by means of the shooting method combined with Runge-Kutta method. The obtained numerical results are then presented in graphical and tabular form and are discussed at length. The results obtained reveal that the concentration profile decreases with increasing homogeneous and heterogeneous reactions parameters. Keywords: Homogeneous–heterogeneous reactions, Non-linearly stretching cylinder, Stagnation-point flow, Convective boundary conditions, Sisko fluid

Boiling hysteresis of impinging circular submerged jets with highly wetting liquids

International Nuclear Information System (INIS)

Zhou, D.W.; Ma, C.F.; Yu, J.

2004-01-01

An experimental study was carried out to characterize the boiling hysteresis of impinging circular submerged jets with highly wetting liquids. The effects of noncondensable gases and surface aging on boiling curves were considered. The present study focused on the effects of jet parameters (jet exit velocity, radial distance from the stagnation point and nozzle diameter) and fluid subcooling on incipient boiling superheat and superheat excursion, as well as the physical mechanism of boiling hysteresis. Results show that the incipient boiling superheat decreases only with fluid subcooling regardless of jet parameters, and that the superheat excursion increases with nozzle diameter and radial distance from the stagnation point and decreasing jet exit velocity and fluid subcooling. Boiling hysteresis occurs due to deactivation of vapor embryos within larger cavities. Three anomalous phenomena at boiling inception are recorded and discussed in terms of irregular activation of vapor embryos

AMCO On-Site Air Monitoring Points, Oakland CA, Live 2017, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This feature class contains points depicting locations and air monitor sensor readings for Vinyl Chloride, Trichloroethene (TCE), and Tetrachloroethene (PCE) and...

Measurement of flow field in the pebble bed type high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Lee, Sa Ya; Lee, Jae Young

2008-01-01

In this study, flow field measurement of the Pebble Bed Reactor(PBR) for the High Temperature Gascooled Reactor(HTGR) was performed. Large number of pebbles in the core of PBR provides complicated flow channel. Due to the complicated geometries, numerical analysis has been intensively made rather than experimental observation. However, the justification of computational simulation by the experimental study is crucial to develop solid analysis of design method. In the present study, a wind tunnel installed with pebbles stacked was constructed and equipped with the Particle Image Velocimetry(PIV). We designed the system scaled up to realize the room temperature condition according to the similarity. The PIV observation gave us stagnation points, low speed region so that the suspected high temperature region can be identified. With the further supplementary experimental works, the present system may produce valuable data to justify the Computational Fluid Dynamics(CFD) simulation method

Vortex dynamics in a pipe T-junction: Recirculation and sensitivity

Science.gov (United States)

Chen, Kevin K.; Rowley, Clarence W.; Stone, Howard A.

2015-03-01

In the last few years, many researchers have noted that regions of recirculating flow often exhibit particularly high sensitivity to spatially localized feedback. We explore the flow through a T-shaped pipe bifurcation—a simple and ubiquitous, but generally poorly understood flow configuration—and provide a complex example of the relation between recirculation and sensitivity. When Re ≥ 320, a phenomenon resembling vortex breakdown occurs in four locations in the junction, with internal stagnation points appearing on vortex axes and causing flow reversal. The structure of the recirculation is similar to the traditional bubble-type breakdown. These recirculation regions are highly sensitive to spatially localized feedback in the linearized Navier-Stokes operator. The flow separation at the corners of the "T," however, does not exhibit this kind of sensitivity. We focus our analysis on the Reynolds number of 560, near the first Hopf bifurcation of the flow.

Abandoned Uranium Mine (AUM) Trust Mine Points, Navajo Nation, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features that represent mines included in the Navajo Environmental Response Trust. This mine category also includes Priority mines....

Evaluation of the health effects of the new driving penalty point system in the Lazio Region, Italy, 2001–4

Science.gov (United States)

Farchi, Sara; Chini, Francesco; Rossi, Paolo Giorgi; Camilloni, Laura; Borgia, Piero; Guasticchi, Gabriella

2007-01-01

Objective The penalty point system was introduced in Italy in June 2003. The aim of this study was to evaluate the health effects of this legislation in the Lazio region. Methods Poisson models were used to compare emergency department visits, hospitalizations and death between the pre‐law and post‐law periods (July 2001–June 2003; July 2003–June 2004). Results The emergency department visit rate ratio (RR) of the two periods was 0.87 (95% confidence interval (CI) 0.86 to 0.88); the corresponding hospital admission RR was 0.87 (95% CI 0.84 to 0.9). The death RR was 0.93 (95% CI 0.82 to 1.05). Conclusion After the legislation was introduced, there were fewer visits to the emergency department, hospitalizations and death from road traffic injuries. However, the effect was lower than expected, and it decreased over time. PMID:17296692

Real Time Precise Point Positioning: Preliminary Results for the Brazilian Region

Science.gov (United States)

Marques, Haroldo; Monico, João.; Hirokazu Shimabukuro, Milton; Aquino, Marcio

2010-05-01

GNSS positioning can be carried out in relative or absolute approach. In the last years, more attention has been driven to the real time precise point positioning (PPP). To achieve centimeter accuracy with this method in real time it is necessary to have available the satellites precise coordinates as well as satellites clocks corrections. The coordinates can be used from the predicted IGU ephemeris, but the satellites clocks must be estimated in a real time. It can be made from a GNSS network as can be seen from EUREF Permanent Network. The infra-structure to realize the PPP in real time is being available in Brazil through the Brazilian Continuous Monitoring Network (RBMC) together with the Sao Paulo State GNSS network which are transmitting GNSS data using NTRIP (Networked Transport of RTCM via Internet Protocol) caster. Based on this information it was proposed a PhD thesis in the Univ. Estadual Paulista (UNESP) aiming to investigate and develop the methodology to estimate the satellites clocks and realize PPP in real time. Then, software is being developed to process GNSS data in the real time PPP mode. A preliminary version of the software was called PPP_RT and is able to process GNSS code and phase data using precise ephemeris and satellites clocks. The PPP processing can be accomplished considering the absolute satellite antenna Phase Center Variation (PCV), Ocean Tide Loading (OTL), Earth Body Tide, among others. The first order ionospheric effects can be eliminated or minimized by ion-free combination or parameterized in the receiver-satellite direction using a stochastic process, e.g. random walk or white noise. In the case of ionosphere estimation, a pseudo-observable is introduced in the mathematical model for each satellite and the initial value can be computed from Klobuchar model or from Global Ionospheric Map (GIM). The adjustment is realized in the recursive mode and the DIA (Detection Identification and Adaptation) is used for quality control. In

Boundary layer polarization and voltage in the 14 MLT region

Science.gov (United States)

Lundin, R.; Yamauchi, M.; Woch, J.; Marklund, G.

1995-05-01

Viking midlatitude observations of ions and electrons in the postnoon auroral region show that field-aligned acceleration of electrons and ions with energies up to a few kiloelectron volts takes place. The characteristics of the upgoing ion beams and the local transverse electric field observed by Viking indicate that parallel ion acceleration is primarily due to a quasi-electrostatic field-aligned acceleration process below Viking altitudes, i.e., below 10,000-13,500 km. A good correlation is found between the maximum upgoing ion beam energy and the depth of the local potential well determined by the Viking electric field experiment within dayside 'ion inverted Vs.' The total transverse potential throughout the entire region near the ion inverted Vs. is generally much higher than the field-aligned potential and may reach well above 10 kV. However, the detailed mapping of the transverse potential out to the boundary layer, a fundamental issue which remains controversial, was not attempted here. An important finding in this study is the strong correlation between the maximum up going ion beam energy of dayside ion inverted Vs and the solar wind velocity. This suggests a direct coupling of the solar wind plasma dynamo/voltage generator to the region of field-aligned particle acceleration. The fact that the center of dayside ion inverted Vs coincide with convection reversals/flow stagnation and upward Birkeland currents on what appears to be closed field lines (Woch et al., 1993), suggests that field-aligned potential structures connect to the inner part of an MHD dyanmo in the low-latitude boundary layer. Thus the Viking observations substantiate the idea of a solar wind induced boundary layer polarization where negatively charged perturbations in the postnoon sector persistently develops along the magnetic field lines, establishing accelerating potential drops along the geomagnetic field lines in the 0.5-10 kV range.

Transitional region of phase transitions in nuclear models

Energy Technology Data Exchange (ETDEWEB)

Kotze, A A

1988-01-01

The phase transition in an exactly solvable nuclear model, the Lipkin model, is scrutinised, first using Hartree-Fock methods or the plain mean flield approximation, and then using projected wave functions. It turns out that the plain mean field is not reliable in the transitional region. Although the projection methods give better resutls in the transitional region, it leads to spurious singularities. While the energy of the projection before variation is slightly better than its projection after variation counterpart, the perfomance of the wave function is considerably worse in the transitional region. The model's wave function undergoes dramatic changes in the transitional region. The mechanism that brings about these changes is studied within a model Hamiltonian that can reproduce the Lipkin model mathematically. It turns out that the numerous exceptional points found in the transitional region, bring about the change of the ground state wave function. Exceptional points are associated with level crossings in the complex plane. These level crossings can be seen as level repulsions in the spectrum. Level repulsion and a sensitive dependence of the system on some external parameter are characteristics of chaotic behaviour. These two features are found in the transitional region of the Lipkin model. In order to study chaos, one has to resort to a statistical analysis. A measure of the chaotic behaviour of systems, the ..delta../sub 3/ statistic, is introduced. The results show that the Lipkin model is harmonic, even in the transitional region. For the Lipkin model the exceptional points are regularly distributed in the complex plane. In a total chaotic system the points would be randomly distributed.

ENERGY DISSIPATION IN MAGNETIC NULL POINTS AT KINETIC SCALES

International Nuclear Information System (INIS)

Olshevsky, Vyacheslav; Lapenta, Giovanni; Divin, Andrey; Eriksson, Elin; Markidis, Stefano

2015-01-01

We use kinetic particle-in-cell and MHD simulations supported by an observational data set to investigate magnetic reconnection in clusters of null points in space plasma. The magnetic configuration under investigation is driven by fast adiabatic flux rope compression that dissipates almost half of the initial magnetic field energy. In this phase powerful currents are excited producing secondary instabilities, and the system is brought into a state of “intermittent turbulence” within a few ion gyro-periods. Reconnection events are distributed all over the simulation domain and energy dissipation is rather volume-filling. Numerous spiral null points interconnected via their spines form null lines embedded into magnetic flux ropes; null point pairs demonstrate the signatures of torsional spine reconnection. However, energy dissipation mainly happens in the shear layers formed by adjacent flux ropes with oppositely directed currents. In these regions radial null pairs are spontaneously emerging and vanishing, associated with electron streams and small-scale current sheets. The number of spiral nulls in the simulation outweighs the number of radial nulls by a factor of 5–10, in accordance with Cluster observations in the Earth's magnetosheath. Twisted magnetic fields with embedded spiral null points might indicate the regions of major energy dissipation for future space missions such as the Magnetospheric Multiscale Mission

Abandoned Uranium Mine (AUM) Priority Mine Points, Navajo Nation, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features representing priority abandoned uranium mines in Navajo Nation, as determined by the US EPA and the Navajo Nation. USEPA and...

2D radiation-magnetohydrodynamic simulations of SATURN imploding Z-pinches

International Nuclear Information System (INIS)

Hammer, J.H.; Eddleman, J.L.; Springer, P.T.

1995-01-01

Z-pinch implosions driven by the SATURN device at Sandia National Laboratory are modeled with a 2D radiation magnetohydrodynamic (MHD) code, showing strong growth of magneto-Rayleigh Taylor (MRT) instability. Modeling of the linear and nonlinear development of MRT modes predicts growth of bubble-spike structures that increase the time span of stagnation and the resulting x-ray pulse width. Radiation is important in the pinch dynamics keeping the sheath relatively cool during the run-in and releasing most of the stagnation energy. The calculations give x-ray pulse widths and magnitudes in reasonable agreement with experiments, but predict a radiating region that is too dense and radially localized at stagnation. We also consider peaked initial density profiles with constant imploding sheath velocity that should reduce MRT instability and improve performance. 2D krypton simulations show an output x-ray power > 80 TW for the peaked profile

Measuring Density Profiles of Electrons and Heavy Particles in a Stable Axially Blown Arc

Science.gov (United States)

Carstensen, J.; Stoller, P.; Galletti, B.; Doiron, C. B.; Sokolov, A.

2017-08-01

Two-color spatial carrier wave interferometry employing pulsed 532- and 671-nm lasers is used to measure the electron-density and heavy-particle-density profiles in the stagnation point of a stable, axially blown arc in argon for currents of 50 to 200 A and stagnation point pressures of 0.2 to 16 bar. This technique takes advantage of the fact that the free-electron contribution to the refractive index depends strongly on the wavelength, while that of the heavy particles does not. The high spatial resolution achieved allows the hot core of the arc to be readily distinguished from the surrounding boundary layer. A custom-built test device is used to ensure flow conditions that lead to a stable, axisymmetric arc; this permits the reconstruction of the density and temperature profiles using a single projection (interferometric image) of the refractive-index distribution through the arc (at two wavelengths). The arc radius determined from the heavy-particle density decreases with increasing stagnation pressure and increases with the current. These measurements are in good agreement with a simple axially blown arc model taking into account Ohmic heating, radiation losses, and enthalpy flow for core temperatures of approximately 16 500 K. The measured electron density at the center of the arc agrees well with a prediction based on local thermodynamic equilibrium.

A fully magnetohydrodynamic simulation of three-dimensional non-null reconnection

International Nuclear Information System (INIS)

Pontin, D.I.; Galsgaard, K.; Hornig, G.; Priest, E.R.

2005-01-01

A knowledge of the nature of fully three-dimensional magnetic reconnection is crucial in understanding a great many processes in plasmas. It has been previously shown that in the kinematic regime the evolution of magnetic flux in three-dimensional reconnection is very different from two dimensions. In this paper a numerical fully magnetohydrodynamic simulation is described, in which this evolution is investigated. The reconnection takes place in the absence of a magnetic null point, and the nonideal region is localized in the center of the domain. The effect of differently prescribed resistivities is considered. The magnetic field is stressed by shear boundary motions, and a current concentration grows within the volume. A stagnation-point flow develops, with strong outflow jets emanating from the reconnection region. The behavior of the magnetic flux matches closely that discovered in the kinematic regime. In particular, it is found that no unique field line velocity exists, and that as a result field lines change their connections continually and continuously throughout the nonideal region. In order to describe the motion of magnetic flux within the domain, it is therefore necessary to use two different field line velocities. The importance of a component of the electric field parallel to the magnetic field is also demonstrated

Abandoned Uranium Mine (AUM) Tronox Mine Points, Navajo Nation, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features that represent mines operated by the Kerr McGee Corp. in the settlement between Anadarko Petroleum Corporation and the U.S....

Micro Coronal Bright Points Observed in the Quiet Magnetic Network by SOHO/EIT

Science.gov (United States)

Falconer, D. A.; Moore, R. L.; Porter, J. G.

1997-01-01

When one looks at SOHO/EIT Fe XII images of quiet regions, one can see the conventional coronal bright points (> 10 arcsec in diameter), but one will also notice many smaller faint enhancements in brightness (Figure 1). Do these micro coronal bright points belong to the same family as the conventional bright points? To investigate this question we compared SOHO/EIT Fe XII images with Kitt Peak magnetograms to determine whether the micro bright points are in the magnetic network and mark magnetic bipoles within the network. To identify the coronal bright points, we applied a picture frame filter to the Fe XII images; this brings out the Fe XII network and bright points (Figure 2) and allows us to study the bright points down to the resolution limit of the SOHO/EIT instrument. This picture frame filter is a square smoothing function (hlargelyalf a network cell wide) with a central square (quarter of a network cell wide) removed so that a bright point's intensity does not effect its own background. This smoothing function is applied to the full disk image. Then we divide the original image by the smoothed image to obtain our filtered image. A bright point is defined as any contiguous set of pixels (including diagonally) which have enhancements of 30% or more above the background; a micro bright point is any bright point 16 pixels or smaller in size. We then analyzed the bright points that were fully within quiet regions (0.6 x 0.6 solar radius) centered on disk center on six different days.

Accurate corresponding point search using sphere-attribute-image for statistical bone model generation

International Nuclear Information System (INIS)

Saito, Toki; Nakajima, Yoshikazu; Sugita, Naohiko; Mitsuishi, Mamoru; Hashizume, Hiroyuki; Kuramoto, Kouichi; Nakashima, Yosio

2011-01-01

Statistical deformable model based two-dimensional/three-dimensional (2-D/3-D) registration is a promising method for estimating the position and shape of patient bone in the surgical space. Since its accuracy depends on the statistical model capacity, we propose a method for accurately generating a statistical bone model from a CT volume. Our method employs the Sphere-Attribute-Image (SAI) and has improved the accuracy of corresponding point search in statistical model generation. At first, target bone surfaces are extracted as SAIs from the CT volume. Then the textures of SAIs are classified to some regions using Maximally-stable-extremal-regions methods. Next, corresponding regions are determined using Normalized cross-correlation (NCC). Finally, corresponding points in each corresponding region are determined using NCC. The application of our method to femur bone models was performed, and worked well in the experiments. (author)

Predicting human age using regional morphometry and inter-regional morphological similarity

Science.gov (United States)

Wang, Xun-Heng; Li, Lihua

2016-03-01

The goal of this study is predicting human age using neuro-metrics derived from structural MRI, as well as investigating the relationships between age and predictive neuro-metrics. To this end, a cohort of healthy subjects were recruited from 1000 Functional Connectomes Project. The ages of the participations were ranging from 7 to 83 (36.17+/-20.46). The structural MRI for each subject was preprocessed using FreeSurfer, resulting in regional cortical thickness, mean curvature, regional volume and regional surface area for 148 anatomical parcellations. The individual age was predicted from the combination of regional and inter-regional neuro-metrics. The prediction accuracy is r = 0.835, p Pearson correlation coefficient between predicted ages and actual ages. Moreover, the LASSO linear regression also found certain predictive features, most of which were inter-regional features. The turning-point of the developmental trajectories in human brain was around 40 years old based on regional cortical thickness. In conclusion, structural MRI could be potential biomarkers for the aging in human brain. The human age could be successfully predicted from the combination of regional morphometry and inter-regional morphological similarity. The inter-regional measures could be beneficial to investigating human brain connectome.

Chromosome break points in T-lymphocytes from atomic bomb survivors

International Nuclear Information System (INIS)

Tanaka, Kimio; Kamada, Nanao; Ohkita, Takeshi; Kuramoto, Atsushi

1982-01-01

In 22 healthy A-bomb survivors who passed more than 30 years since receiving radiation, distribution of 592 chromosome break points found in T-lymphocytes of the peripheral blood was not proportional to the length, the arm length of chromosomes, nor the length of regions, but it was non-random on the chromosomes. High distribution of chromosome break points occurred in 11 regions: 22q1, 14q3, 5q3, 21q2, 6q2, 18p1, 13q3. The regions, 22q1, 14q3, 21q2, and 6q2, contained the chromosome break points which were frequently found in leukemic chromosomes. Some of the changes in nuclear-type observed in leukemic cells of A-bomb survivors were similar to those found in leukemic cells of non-exposed leukemic patients. In abnormal chromosomes of T-lymphocytes of healthy A-bomb survivors, no cells with abnormal nuclear types such as t(4;11), t(8;21), t(9;22), and t(15;17) which are seen in various types of leukemia were not found. However, cells with chromosome aberrations, 22q-, 14q+, and 6q-, were found to be 0.99%, 0.55%, and 0.25% respectively. On the basis of these results, implication of chromosome aberrations in developing cancer was discussed. (Ueda, J.)

A SITELLE view of M31's central region - I. Calibrations and radial velocity catalogue of nearly 800 emission-line point-like sources

Science.gov (United States)

Martin, Thomas B.; Drissen, Laurent; Melchior, Anne-Laure

2018-01-01

We present a detailed description of the wavelength, astrometric and photometric calibration plan for SITELLE, the imaging Fourier transform spectrometer attached to the Canada-France-Hawaii telescope, based on observations of a red (647-685 nm) data cube of the central region (11 arcmin × 11 arcmin) of M 31. The first application, presented in this paper is a radial-velocity catalogue (with uncertainties of ∼2-6 km s-1) of nearly 800 emission-line point-like sources, including ∼450 new discoveries. Most of the sources are likely planetary nebulae, although we also detect five novae (having erupted in the first eight months of 2016) and one new supernova remnant candidate.

Point Clouds to Indoor/outdoor Accessibility Diagnosis

Science.gov (United States)

Balado, J.; Díaz-Vilariño, L.; Arias, P.; Garrido, I.

2017-09-01

This work presents an approach to automatically detect structural floor elements such as steps or ramps in the immediate environment of buildings, elements that may affect the accessibility to buildings. The methodology is based on Mobile Laser Scanner (MLS) point cloud and trajectory information. First, the street is segmented in stretches along the trajectory of the MLS to work in regular spaces. Next, the lower region of each stretch (the ground zone) is selected as the ROI and normal, curvature and tilt are calculated for each point. With this information, points in the ROI are classified in horizontal, inclined or vertical. Points are refined and grouped in structural elements using raster process and connected components in different phases for each type of previously classified points. At last, the trajectory data is used to distinguish between road and sidewalks. Adjacency information is used to classify structural elements in steps, ramps, curbs and curb-ramps. The methodology is tested in a real case study, consisting of 100 m of an urban street. Ground elements are correctly classified in an acceptable computation time. Steps and ramps also are exported to GIS software to enrich building models from Open Street Map with information about accessible/inaccessible entrances and their locations.

Superconducting magnets, cryostats, and cryogenics for the interaction region of the SSC

International Nuclear Information System (INIS)

Jayakumar, R.J.; Abramovich, S.; Zhmad, A.

1993-10-01

The Superconducting Super Collider (SSC) has two counterrotating 20-TeV proton beams that will be made to collide at specific interaction points to carry out high energy physics experiments. The Collider ring has two sites, West and East, for such Interaction Regions (IRs), and the conceptual design of the East Interaction Region is underway. The East IR, in the present stage of design, has two interaction points, the requirements for which have been specified in terms of distance L* to the nearest magnet and the beam luminosity. Based on these requirements, the optics for transition from arc regions or utility regions to the IR and for focusing the beams have been obtained. The optical arrangement consists of a tuning section of quadrupoles, the strength of which is adjusted to obtain the required beta squeeze; a pair of bending dipoles to reduce the beam separation from the nominal 900 mm to 450 mm; an achromat section of quadrupoles, which consist of two cold masses in one cryostnother pair of dipoles to bring the beams together at the required crossing angle; and a set of final focus quads facing the interaction point. The optics is symmetric about the interaction point, and the two interaction points are separated by a hinge region consisting of superconducting dipoles and quadrupoles similar to the arc region. In the regions where the beams are vertically bent and straightened out by dipoles, the beam traverses warm regions provided for placing beam collimators. The superconducting magnets, including the final focus quadrupoles, operate with supercritical He at 4 atm and a nominal temperature of 4.15 K. In this paper, descriptions of the magnets, the cryostats, and cryo bypasses around the warm region and interaction points are provided. Also discussed are the cooling requirements and design for the final focus quadrupole, which receives significant heat load from beam radiation

32 CFR Appendix B to Part 290 - DCAA's FOIA Points of Contact

Science.gov (United States)

2010-07-01

... (CONTINUED) FREEDOM OF INFORMATION ACT PROGRAM DEFENSE CONTRACT AUDIT AGENCY (DCAA) FREEDOM OF INFORMATION ACT PROGRAM Pt. 290, App. B Appendix B to Part 290—DCAA's FOIA Points of Contact (Regional Offices.... Pacific Ocean and Asian Islands. Asia except the Middle East. Australia. Georgia DCAA Eastern Regional...

Geoportals: an internet marketing perspective

NARCIS (Netherlands)

Oort, van P.A.J.; Kuyper, M.C.; Bregt, A.K.; Crompvoets, J.W.H.C.

2009-01-01

A geoportal is a web site that presents an entry point to geo-products (including geo-data) on the web. Despite their importance in (spatial) data infrastructures, literature suggest stagnating or even declining trends in visitor numbers. In this paper relevant ideas and techniques for improving

The Life Cycle of the Child Care Center -- Understanding Center Growth and Development.

Science.gov (United States)

Bess, Gary; Ratekin, Cindy

2001-01-01

Identifies the seven stages of the life cycle for child care centers: entrepreneurial; development; formalization; maturity; stagnation; death; and renewal. Suggests that critical transition points exist for organizational development, and that, if they are aware of and understand each stage of development, administrators may intervene at those…

Physical study of experimental fusion breeder FEB divertor

International Nuclear Information System (INIS)

Zhu Yukun; Zhou Xiaobing; Huang Jinhua; Feng Kaiming; Deng Peizhi; Huo Tiejun

1999-10-01

The physical study of FEB divertor is presented. In order to improve the impurity control and increase ion-neutral interactions in the divertor, the configuration of the divertor is optimized to be the close type in the engineering design activity compared with the open type in the early conceptual activity. The operation mode of the divertor is designed to be partial detached plasma mode under conditions of combination gas-puffing with impurity injection. The position of gas-puffing is optimized to be at the torus mid-plane with NEWT1D code from the viewpoint of impurity retention and radiation in the scrape-off layer/divertor region. Boron is chosen as the injected impurity. The effect of boron impurity injection is evaluated from the reduced heat load on the divertor target. The plasma pressure drop along the scrape-off layer/divertor region is estimated with the two-point transport model and impurity radiation model in the dynamic gas target concept. The simulation results show that the plasma pressure drop factor f p is not only related to the radiation fraction f rad but also related greatly to the stagnation point density n s

Feature curve extraction from point clouds via developable strip intersection

Directory of Open Access Journals (Sweden)

Kai Wah Lee

2016-04-01

Full Text Available In this paper, we study the problem of computing smooth feature curves from CAD type point clouds models. The proposed method reconstructs feature curves from the intersections of developable strip pairs which approximate the regions along both sides of the features. The generation of developable surfaces is based on a linear approximation of the given point cloud through a variational shape approximation approach. A line segment sequencing algorithm is proposed for collecting feature line segments into different feature sequences as well as sequential groups of data points. A developable surface approximation procedure is employed to refine incident approximation planes of data points into developable strips. Some experimental results are included to demonstrate the performance of the proposed method.

Image Relaxation Matching Based on Feature Points for DSM Generation

Institute of Scientific and Technical Information of China (English)

ZHENG Shunyi; ZHANG Zuxun; ZHANG Jianqing

2004-01-01

In photogrammetry and remote sensing, image matching is a basic and crucial process for automatic DEM generation. In this paper we presented a image relaxation matching method based on feature points. This method can be considered as an extention of regular grid point based matching. It avoids the shortcome of grid point based matching. For example, with this method, we can avoid low or even no texture area where errors frequently appear in cross correlaton matching. In the mean while, it makes full use of some mature techniques such as probability relaxation, image pyramid and the like which have already been successfully used in grid point matching process. Application of the technique to DEM generaton in different regions proved that it is more reasonable and reliable.

20 January 2014 - Members of the Regional Assemblies and Parliaments United Kingdom of Great Britain and Northern Ireland visiting the LHC tunnel at Point 8 with Technology Department, Vacuum, Surfaces and Coatings Group P. Cruikshank.

CERN Document Server

Pantelia, Anna

2014-01-01

20 January 2014 - Members of the Regional Assemblies and Parliaments United Kingdom of Great Britain and Northern Ireland visiting the LHC tunnel at Point 8 with Technology Department, Vacuum, Surfaces and Coatings Group P. Cruikshank.

A density based algorithm to detect cavities and holes from planar points

Science.gov (United States)

Zhu, Jie; Sun, Yizhong; Pang, Yueyong

2017-12-01

Delaunay-based shape reconstruction algorithms are widely used in approximating the shape from planar points. However, these algorithms cannot ensure the optimality of varied reconstructed cavity boundaries and hole boundaries. This inadequate reconstruction can be primarily attributed to the lack of efficient mathematic formulation for the two structures (hole and cavity). In this paper, we develop an efficient algorithm for generating cavities and holes from planar points. The algorithm yields the final boundary based on an iterative removal of the Delaunay triangulation. Our algorithm is mainly divided into two steps, namely, rough and refined shape reconstructions. The rough shape reconstruction performed by the algorithm is controlled by a relative parameter. Based on the rough result, the refined shape reconstruction mainly aims to detect holes and pure cavities. Cavity and hole are conceptualized as a structure with a low-density region surrounded by the high-density region. With this structure, cavity and hole are characterized by a mathematic formulation called as compactness of point formed by the length variation of the edges incident to point in Delaunay triangulation. The boundaries of cavity and hole are then found by locating a shape gradient change in compactness of point set. The experimental comparison with other shape reconstruction approaches shows that the proposed algorithm is able to accurately yield the boundaries of cavity and hole with varying point set densities and distributions.

The Euclidean three-point function in loop and perturbative gravity

International Nuclear Information System (INIS)

Rovelli, Carlo; Zhang Mingyi

2011-01-01

We compute the leading order of the three-point function in loop quantum gravity, using the vertex expansion of the Euclidean version of the new spin foam dynamics, in the region of γ < 1. We find results consistent with Regge calculus in the limit γ → 0, j → ∞. We also compute the tree-level three-point function of perturbative quantum general relativity in position space and discuss the possibility of directly comparing the two results.

Conductance enhancement in quantum-point-contact semiconductor-superconductor devices

DEFF Research Database (Denmark)

Mortensen, Asger; Jauho, Antti-Pekka; Flensberg, Karsten

1999-01-01

We present numerical calculations of the conductance of an interface between a phase-coherent two-dimensional electron gas and a superconductor with a quantum point contact in the normal region. Using a scattering matrix approach we reconsider the geometry of De Raedt, Michielsen, and Klapwijk...... [Phys. Rev. B 50, 631 (1994)] which was studied within the time-dependent Bogoliubov-de Gennes formalism. We find that the factor-of-2 enhancement of the conductance G(NS) compared to the normal state conductance GN for ideal interfaces may be suppressed for interfaces with a quantum point contact...

Point kinetics model with one-dimensional (radial) heat conduction formalism

International Nuclear Information System (INIS)

Jain, V.K.

1989-01-01

A point-kinetics model with one-dimensional (radial) heat conduction formalism has been developed. The heat conduction formalism is based on corner-mesh finite difference method. To get average temperatures in various conducting regions, a novel weighting scheme has been devised. The heat conduction model has been incorporated in the point-kinetics code MRTF-FUEL. The point-kinetics equations are solved using the method of real integrating factors. It has been shown by analysing the simulation of hypothetical loss of regulation accident in NAPP reactor that the model is superior to the conventional one in accuracy and speed of computation. (author). 3 refs., 3 tabs

Regional labour market research on participation rates

NARCIS (Netherlands)

Elhorst, J.P.

1996-01-01

This article reviews the methodology of 17 empirical studies in which the participation rate has been estimated with the help of regional data. After defining and pointing our the orientation of regional labour market research on participation rates, three methodological issues dominate the

effect of non-volatile solute on the freezing point of malonic acid

African Journals Online (AJOL)

DR. AMINU

with melting point range 134 - 135 OC. It is solid at room temperature with ... MATERIALS AND METHODS. Quality Control. All glass ... The curve usually has three important features; the linear variation of temperature with time, the region where the temperature remains constant for a time values and the region where there ...

The transitional region of phase transitions in nuclear models

International Nuclear Information System (INIS)

Kotze, A.A.

1988-01-01

The phase transition in an exactly solvable nuclear model, the Lipkin model, is scrutinised, first using Hartree-Fock methods or the plain mean flield approximation, and then using projected wave functions. It turns out that the plain mean field is not reliable in the transitional region. Although the projection methods give better resutls in the transitional region, it leads to spurious singularities. While the energy of the projection before variation is slightly better than its projection after variation counterpart, the perfomance of the wave function is considerably worse in the transitional region. The model's wave function undergoes dramatic changes in the transitional region. The mechanism that brings about these changes is studied within a model Hamiltonian that can reproduce the Lipkin model mathematically. It turns out that the numerous exceptional points found in the transitional region, bring about the change of the ground state wave function. Exceptional points are associated with level crossings in the complex plane. These level crossings can be seen as level repulsions in the spectrum. Level repulsion and a sensitive dependence of the system on some external parameter are characteristics of chaotic behaviour. These two features are found in the transitional region of the Lipkin model. In order to study chaos, one has to resort to a statistical analysis. A measure of the chaotic behaviour of systems, the Δ 3 statistic, is introduced. The results show that the Lipkin model is harmonic, even in the transitional region. For the Lipkin model the exceptional points are regularly distributed in the complex plane. In a total chaotic system the points would be randomly distributed

Spatial dispersion modeling of 90Sr by point cumulative semivariogram at Keban Dam Lake, Turkey

International Nuclear Information System (INIS)

Kuelahci, Fatih; Sen, Zekai

2007-01-01

Spatial analysis of 90 Sr artificial radionuclide in consequence of global fallout and Chernobyl nuclear accident has been carried out by using the point cumulative semivariogram (PCSV) technique based on 40 surface water station measurements in Keban Dam Lake during March, April, and May 2006. This technique is a convenient tool in obtaining the regional variability features around each sampling point, which yields the structural effects also in the vicinity of the same point. It presents the regional effect of all the other sites within the study area on the site concerned. In order to see to change of 90 Sr, the five models are constituted. Additionally, it provides a measure of cumulative similarity of the regional variable, 90 Sr, around any measurement site and hence it is possible to draw regional similarity maps at any desired distance around each station. In this paper, such similarity maps are also drawn for a set of distances. 90 Sr activities in lake that distance approximately 4.5 km from stations show the maximum similarity

Regional collaboration among Urban Area Security Initiative regions: results of the Johns Hopkins urban area survey.

Science.gov (United States)

Errett, Nicole A; Bowman, Calvin; Barnett, Daniel J; Resnick, Beth A; Frattaroli, Shannon; Rutkow, Lainie

2014-01-01

Regional collaboration has been identified as a potential facilitator of public health preparedness efforts. The Urban Area Security Initiative (UASI) grant program, administered by the Federal Emergency Management Agency (FEMA) since 2003, has provided 64 high-risk metropolitan areas funding to enhance their regional preparedness capabilities. This study describes informal and formal regional collaboration infrastructure, as well as regional collaboration-related activities and assessment methods, in FFY2010 UASI regions. A cross-sectional online survey was administered via Survey Monkey from September through December 2013. Points of contact from FFY2010 funded UASI metropolitan areas completed the survey, with a response rate of 77.8% (n=49). Summary statistics were calculated to describe the current informal and formal regional collaboration infrastructure. Additionally, the cross-sectional survey collected rates of agreement with 8 collaborative preparedness statements at 3 time points. The survey found that UASI regions are engaging in collaborative activities and investments to build capabilities, with most collaboration occurring in the prevention, protection, and response mission areas. Collaborative relationships in preparedness among emergency managers and municipal chief executive officers improved during the FFY2010 UASI performance period compared to the pre-UASI award period, with lasting effects. The majority of UASI regions reported conducting independent assessments of capabilities and their measurement at the UASI region level. Urban areas that received a FFY2010 UASI grant award are engaging in collaborative activities and have established interjurisdictional relationships in preparedness. The use of grant funds to encourage collaboration in preparedness has the potential to leverage limited resources and promote informed investments.

Regional Collaboration Among Urban Area Security Initiative Regions: Results of the Johns Hopkins Urban Area Survey

Science.gov (United States)

Bowman, Calvin; Barnett, Daniel J.; Resnick, Beth A.; Frattaroli, Shannon; Rutkow, Lainie

2014-01-01

Regional collaboration has been identified as a potential facilitator of public health preparedness efforts. The Urban Area Security Initiative (UASI) grant program, administered by the Federal Emergency Management Agency (FEMA) since 2003, has provided 64 high-risk metropolitan areas funding to enhance their regional preparedness capabilities. This study describes informal and formal regional collaboration infrastructure, as well as regional collaboration–related activities and assessment methods, in FFY2010 UASI regions. A cross-sectional online survey was administered via Survey Monkey from September through December 2013. Points of contact from FFY2010 funded UASI metropolitan areas completed the survey, with a response rate of 77.8% (n=49). Summary statistics were calculated to describe the current informal and formal regional collaboration infrastructure. Additionally, the cross-sectional survey collected rates of agreement with 8 collaborative preparedness statements at 3 time points. The survey found that UASI regions are engaging in collaborative activities and investments to build capabilities, with most collaboration occurring in the prevention, protection, and response mission areas. Collaborative relationships in preparedness among emergency managers and municipal chief executive officers improved during the FFY2010 UASI performance period compared to the pre-UASI award period, with lasting effects. The majority of UASI regions reported conducting independent assessments of capabilities and their measurement at the UASI region level. Urban areas that received a FFY2010 UASI grant award are engaging in collaborative activities and have established interjurisdictional relationships in preparedness. The use of grant funds to encourage collaboration in preparedness has the potential to leverage limited resources and promote informed investments. PMID:25398073

Command and Control Workshop: Structures and Processes for R&D Service Delivery

Science.gov (United States)

1996-12-01

technique de conference d’ idees mise au point par les auteurs . Ce rapport fait etat des resultats de Ia conference quant au cadre et au processus suggeres...Prevents stagnation 9. Promote informed decision making 10. Better results 11. Faster transfer from academia/ theory to application 12. Increased

Effects of plasma jet parameters, ionization, thermal conduction, and radiation on stagnation conditions of an imploding plasma liner

Science.gov (United States)

Stanic, Milos

The disciplines of High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) are characterized by hypervelocity implosions and strong shocks. The Plasma Liner Experiment (PLX) is focused on reaching HEDP and/or ICF relevant regimes in excess of 1 Mbar peak pressure by the merging and implosion of discrete plasma jets, as a potentially efficient path towards these extreme conditions in a laboratory. In this work we have presented the first 3D simulations of plasma liner, formation, and implosion by the merging of discrete plasma jets in which ionization, thermal conduction, and radiation are all included in the physics model. The study was conducted by utilizing a smoothed particle hydrodynamics code (SPHC) and was a part of the plasma liner experiment (PLX). The salient physics processes of liner formation and implosion are studied, namely vacuum propagation of plasma jets, merging of the jets (liner forming), implosion (liner collapsing), stagnation (peak pressure), and expansion (rarefaction wave disassembling the target). Radiative transport was found to significantly reduce the temperature of the liner during implosion, thus reducing the thermal expansion rates and leaving more pronounced gradients in the plasma liner during the implosion compared with ideal hydrodynamic simulations. These pronounced gradients lead to a greater sensitivity of initial jet geometry and symmetry on peak pressures obtained. Accounting for ionization and transport, many cases gave higher peak pressures than the ideal hydrodynamic simulations. Scaling laws were developed accordingly, creating a non-dimensional parameter space in which performance of an imploding plasma jet liner can be estimated. It is shown that HEDP regimes could be reached with ≈ 5 MJ of liner energy, which would translate to roughly 10 to 20 MJ of stored (capacitor) energy. This is a potentially significant improvement over the currently available means via ICF of achieving HEDP and nuclear

Quantitative evaluation for small surface damage based on iterative difference and triangulation of 3D point cloud

Science.gov (United States)

Zhang, Yuyan; Guo, Quanli; Wang, Zhenchun; Yang, Degong

2018-03-01

This paper proposes a non-contact, non-destructive evaluation method for the surface damage of high-speed sliding electrical contact rails. The proposed method establishes a model of damage identification and calculation. A laser scanning system is built to obtain the 3D point cloud data of the rail surface. In order to extract the damage region of the rail surface, the 3D point cloud data are processed using iterative difference, nearest neighbours search and a data registration algorithm. The curvature of the point cloud data in the damage region is mapped to RGB color information, which can directly reflect the change trend of the curvature of the point cloud data in the damage region. The extracted damage region is divided into three prism elements by a method of triangulation. The volume and mass of a single element are calculated by the method of geometric segmentation. Finally, the total volume and mass of the damage region are obtained by the principle of superposition. The proposed method is applied to several typical injuries and the results are discussed. The experimental results show that the algorithm can identify damage shapes and calculate damage mass with milligram precision, which are useful for evaluating the damage in a further research stage.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

Science.gov (United States)

Pereira, N. F.; Sitek, A.

2010-09-01

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

International Nuclear Information System (INIS)

Pereira, N F; Sitek, A

2010-01-01

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

Evaluation of a 3D point cloud tetrahedral tomographic reconstruction method

Energy Technology Data Exchange (ETDEWEB)

Pereira, N F; Sitek, A, E-mail: nfp4@bwh.harvard.ed, E-mail: asitek@bwh.harvard.ed [Department of Radiology, Brigham and Women' s Hospital-Harvard Medical School Boston, MA (United States)

2010-09-21

Tomographic reconstruction on an irregular grid may be superior to reconstruction on a regular grid. This is achieved through an appropriate choice of the image space model, the selection of an optimal set of points and the use of any available prior information during the reconstruction process. Accordingly, a number of reconstruction-related parameters must be optimized for best performance. In this work, a 3D point cloud tetrahedral mesh reconstruction method is evaluated for quantitative tasks. A linear image model is employed to obtain the reconstruction system matrix and five point generation strategies are studied. The evaluation is performed using the recovery coefficient, as well as voxel- and template-based estimates of bias and variance measures, computed over specific regions in the reconstructed image. A similar analysis is performed for regular grid reconstructions that use voxel basis functions. The maximum likelihood expectation maximization reconstruction algorithm is used. For the tetrahedral reconstructions, of the five point generation methods that are evaluated, three use image priors. For evaluation purposes, an object consisting of overlapping spheres with varying activity is simulated. The exact parallel projection data of this object are obtained analytically using a parallel projector, and multiple Poisson noise realizations of these exact data are generated and reconstructed using the different point generation strategies. The unconstrained nature of point placement in some of the irregular mesh-based reconstruction strategies has superior activity recovery for small, low-contrast image regions. The results show that, with an appropriately generated set of mesh points, the irregular grid reconstruction methods can out-perform reconstructions on a regular grid for mathematical phantoms, in terms of the performance measures evaluated.

Zaraščanje kmetijskih zemljišč v slovenskem alpskem svetu = Abandoning of agricultural land in the Slovenian Alps

Directory of Open Access Journals (Sweden)

Tomaž Cunder

1998-01-01

Full Text Available Abandoning of agricultural land belongs to the most prominent indicators of partial disintegration of cultivated landscape. The Slovenian Alps are undoubtedly among those regions in which the abandoning is the most intensive and widely extended. The stagnation of agriculture, which is going on at present, is influenced by natural and social and demographic conditions which also affect the extensification of the most unfavourable areas followed by permanent abandoning of production. If the reasons for this situation are considered, the abandoning of agricultural land can be defined as a reflection of a disturbed balance between the socio-economic situation of agricultural population and the natural disposition for agricultural production. Areas with the most severe degradation of cultured landscape are, as a rule, the most prominent depopulation and deagrarisation areas in the Alps. Revitalisation of agricultural land in the process of abandoning is not only important from the productionally strategic point of view but also from the regional and ecological one.

Unsteady heat transfer from a circular cylinder for Reynolds numbers from 3000 to 15,000

International Nuclear Information System (INIS)

Nakamura, Hajime; Igarashi, Tamotsu

2004-01-01

Unsteady heat transfer from a circular cylinder to the cross-flow of air was investigated experimentally for Reynolds numbers from 3000 to 15,000. Fluctuating heat transfer on the cylinder surface was measured using a heat flux sensor, and time-spatial characteristics of the heat transfer were measured using an infrared thermograph. The present measurements showed that the alternating rolling-up of the shear layers that separated from the cylinder forms an alternating reattached flow at the rear of the cylinder in the range of Re>5000-8000, due to the forward movement of the vortex formation region with increasing Reynolds number. This leads to a sharp increase in the time-averaged Nusselt number around the rear stagnation point of the cylinder. The heat transfer in the separated flow region has spanwise nonuniformity throughout the examined Reynolds number range. The wavelength of this nonuniformity corresponds to that of the streamwise vortices formed in the near-wake

Tipping point of a conifer forest ecosystem under severe drought

Science.gov (United States)

Huang, Kaicheng; Yi, Chuixiang; Wu, Donghai; Zhou, Tao; Zhao, Xiang; Blanford, William J.; Wei, Suhua; Wu, Hao; Ling, Du; Li, Zheng

2015-02-01

Drought-induced tree mortality has recently received considerable attention. Questions have arisen over the necessary intensity and duration thresholds of droughts that are sufficient to trigger rapid forest declines. The values of such tipping points leading to forest declines due to drought are presently unknown. In this study, we have evaluated the potential relationship between the level of tree growth and concurrent drought conditions with data of the tree growth-related ring width index (RWI) of the two dominant conifer species (Pinus edulis and Pinus ponderosa) in the Southwestern United States (SWUS) and the meteorological drought-related standardized precipitation evapotranspiration index (SPEI). In this effort, we determined the binned averages of RWI and the 11 month SPEI within the month of July within each bin of 30 of RWI in the range of 0-3000. We found a significant correlation between the binned averages of RWI and SPEI at the regional-scale under dryer conditions. The tipping point of forest declines to drought is predicted by the regression model as SPEItp = -1.64 and RWItp = 0, that is, persistence of the water deficit (11 month) with intensity of -1.64 leading to negligible growth for the conifer species. When climate conditions are wetter, the correlation between the binned averages of RWI and SPEI is weaker which we believe is most likely due to soil water and atmospheric moisture levels no longer being the dominant factor limiting tree growth. We also illustrate a potential application of the derived tipping point (SPEItp = -1.64) through an examination of the 2002 extreme drought event in the SWUS conifer forest regions. Distinguished differences in remote-sensing based NDVI anomalies were found between the two regions partitioned by the derived tipping point.

Tipping point of a conifer forest ecosystem under severe drought

International Nuclear Information System (INIS)

Huang, Kaicheng; Zhou, Tao; Wu, Hao; Ling, Du; Li, Zheng; Yi, Chuixiang; Blanford, William J; Wei, Suhua; Wu, Donghai; Zhao, Xiang

2015-01-01

Drought-induced tree mortality has recently received considerable attention. Questions have arisen over the necessary intensity and duration thresholds of droughts that are sufficient to trigger rapid forest declines. The values of such tipping points leading to forest declines due to drought are presently unknown. In this study, we have evaluated the potential relationship between the level of tree growth and concurrent drought conditions with data of the tree growth-related ring width index (RWI) of the two dominant conifer species (Pinus edulis and Pinus ponderosa) in the Southwestern United States (SWUS) and the meteorological drought-related standardized precipitation evapotranspiration index (SPEI). In this effort, we determined the binned averages of RWI and the 11 month SPEI within the month of July within each bin of 30 of RWI in the range of 0–3000. We found a significant correlation between the binned averages of RWI and SPEI at the regional-scale under dryer conditions. The tipping point of forest declines to drought is predicted by the regression model as SPEI tp  = −1.64 and RWI tp  = 0, that is, persistence of the water deficit (11 month) with intensity of −1.64 leading to negligible growth for the conifer species. When climate conditions are wetter, the correlation between the binned averages of RWI and SPEI is weaker which we believe is most likely due to soil water and atmospheric moisture levels no longer being the dominant factor limiting tree growth. We also illustrate a potential application of the derived tipping point (SPEI tp  = −1.64) through an examination of the 2002 extreme drought event in the SWUS conifer forest regions. Distinguished differences in remote-sensing based NDVI anomalies were found between the two regions partitioned by the derived tipping point. (letter)

Site management plan: Douglas Point Ecological Laboratory

International Nuclear Information System (INIS)

Jensen, B.L.; Miles, K.J.; Strass, P.K.; McDonald, B.

1979-01-01

A portion of the Douglas Point Site has been set aside for use as an ecological monitoring facility (DPEL). Plans call for it to provide for long-term scientific study and analysis of specific terrestrial and aquatic ecological systems representative of the coastal plain region of the mid-Atlantic United States. Discussion of the program is presented under the following section headings: goals and objectives; management and organization of DPEL; laboratory director; site manager; monitoring manager; research manager; and, organizational chart. The seven appendixes are entitled: detailed site description; supplemental land use plan; contract between Potomac Electric Power Company and Charles County Community Collge (CCCC); research and monitoring projects initiated at the Douglas Point Power Plant site; advisory committees; facilities and equipment; and CCCC personnel resumes

Downscaling a global climate model to simulate climate change over the US and the implication on regional and urban air quality

Directory of Open Access Journals (Sweden)

M. Trail

2013-09-01

Full Text Available Climate change can exacerbate future regional air pollution events by making conditions more favorable to form high levels of ozone. In this study, we use spectral nudging with the Weather Research and Forecasting (WRF model to downscale NASA earth system GISS modelE2 results during the years 2006 to 2010 and 2048 to 2052 over the contiguous United States in order to compare the resulting meteorological fields from the air quality perspective during the four seasons of five-year historic and future climatological periods. GISS results are used as initial and boundary conditions by the WRF regional climate model (RCM to produce hourly meteorological fields. The downscaling technique and choice of physics parameterizations used are evaluated by comparing them with in situ observations. This study investigates changes of similar regional climate conditions down to a 12 km by 12 km resolution, as well as the effect of evolving climate conditions on the air quality at major US cities. The high-resolution simulations produce somewhat different results than the coarse-resolution simulations in some regions. Also, through the analysis of the meteorological variables that most strongly influence air quality, we find consistent changes in regional climate that would enhance ozone levels in four regions of the US during fall (western US, Texas, northeastern, and southeastern US, one region during summer (Texas, and one region where changes potentially would lead to better air quality during spring (Northeast. Changes in regional climate that would enhance ozone levels are increased temperatures and stagnation along with decreased precipitation and ventilation. We also find that daily peak temperatures tend to increase in most major cities in the US, which would increase the risk of health problems associated with heat stress. Future work will address a more comprehensive assessment of emissions and chemistry involved in the formation and removal of air

Automatic Generation of Indoor Navigable Space Using a Point Cloud and its Scanner Trajectory

Science.gov (United States)

Staats, B. R.; Diakité, A. A.; Voûte, R. L.; Zlatanova, S.

2017-09-01

Automatic generation of indoor navigable models is mostly based on 2D floor plans. However, in many cases the floor plans are out of date. Buildings are not always built according to their blue prints, interiors might change after a few years because of modified walls and doors, and furniture may be repositioned to the user's preferences. Therefore, new approaches for the quick recording of indoor environments should be investigated. This paper concentrates on laser scanning with a Mobile Laser Scanner (MLS) device. The MLS device stores a point cloud and its trajectory. If the MLS device is operated by a human, the trajectory contains information which can be used to distinguish different surfaces. In this paper a method is presented for the identification of walkable surfaces based on the analysis of the point cloud and the trajectory of the MLS scanner. This method consists of several steps. First, the point cloud is voxelized. Second, the trajectory is analysing and projecting to acquire seed voxels. Third, these seed voxels are generated into floor regions by the use of a region growing process. By identifying dynamic objects, doors and furniture, these floor regions can be modified so that each region represents a specific navigable space inside a building as a free navigable voxel space. By combining the point cloud and its corresponding trajectory, the walkable space can be identified for any type of building even if the interior is scanned during business hours.

Elastic dipoles of point defects from atomistic simulations

Science.gov (United States)

Varvenne, Céline; Clouet, Emmanuel

2017-12-01

The interaction of point defects with an external stress field or with other structural defects is usually well described within continuum elasticity by the elastic dipole approximation. Extraction of the elastic dipoles from atomistic simulations is therefore a fundamental step to connect an atomistic description of the defect with continuum models. This can be done either by a fitting of the point-defect displacement field, by a summation of the Kanzaki forces, or by a linking equation to the residual stress. We perform here a detailed comparison of these different available methods to extract elastic dipoles, and show that they all lead to the same values when the supercell of the atomistic simulations is large enough and when the anharmonic region around the point defect is correctly handled. But, for small simulation cells compatible with ab initio calculations, only the definition through the residual stress appears tractable. The approach is illustrated by considering various point defects (vacancy, self-interstitial, and hydrogen solute atom) in zirconium, using both empirical potentials and ab initio calculations.

Repeated mass strandings of Miocene marine mammals from Atacama Region of Chile point to sudden death at sea.

Science.gov (United States)

Pyenson, Nicholas D; Gutstein, Carolina S; Parham, James F; Le Roux, Jacobus P; Chavarría, Catalina Carreño; Little, Holly; Metallo, Adam; Rossi, Vincent; Valenzuela-Toro, Ana M; Velez-Juarbe, Jorge; Santelli, Cara M; Rogers, David Rubilar; Cozzuol, Mario A; Suárez, Mario E

2014-04-22

Marine mammal mass strandings have occurred for millions of years, but their origins defy singular explanations. Beyond human causes, mass strandings have been attributed to herding behaviour, large-scale oceanographic fronts and harmful algal blooms (HABs). Because algal toxins cause organ failure in marine mammals, HABs are the most common mass stranding agent with broad geographical and widespread taxonomic impact. Toxin-mediated mortalities in marine food webs have the potential to occur over geological timescales, but direct evidence for their antiquity has been lacking. Here, we describe an unusually dense accumulation of fossil marine vertebrates from Cerro Ballena, a Late Miocene locality in Atacama Region of Chile, preserving over 40 skeletons of rorqual whales, sperm whales, seals, aquatic sloths, walrus-whales and predatory bony fish. Marine mammal skeletons are distributed in four discrete horizons at the site, representing a recurring accumulation mechanism. Taphonomic analysis points to strong spatial focusing with a rapid death mechanism at sea, before being buried on a barrier-protected supratidal flat. In modern settings, HABs are the only known natural cause for such repeated, multispecies accumulations. This proposed agent suggests that upwelling zones elsewhere in the world should preserve fossil marine vertebrate accumulations in similar modes and densities.

Repeated mass strandings of Miocene marine mammals from Atacama Region of Chile point to sudden death at sea

Science.gov (United States)

Pyenson, Nicholas D.; Gutstein, Carolina S.; Parham, James F.; Le Roux, Jacobus P.; Chavarría, Catalina Carreño; Little, Holly; Metallo, Adam; Rossi, Vincent; Valenzuela-Toro, Ana M.; Velez-Juarbe, Jorge; Santelli, Cara M.; Rogers, David Rubilar; Cozzuol, Mario A.; Suárez, Mario E.

2014-01-01

Marine mammal mass strandings have occurred for millions of years, but their origins defy singular explanations. Beyond human causes, mass strandings have been attributed to herding behaviour, large-scale oceanographic fronts and harmful algal blooms (HABs). Because algal toxins cause organ failure in marine mammals, HABs are the most common mass stranding agent with broad geographical and widespread taxonomic impact. Toxin-mediated mortalities in marine food webs have the potential to occur over geological timescales, but direct evidence for their antiquity has been lacking. Here, we describe an unusually dense accumulation of fossil marine vertebrates from Cerro Ballena, a Late Miocene locality in Atacama Region of Chile, preserving over 40 skeletons of rorqual whales, sperm whales, seals, aquatic sloths, walrus-whales and predatory bony fish. Marine mammal skeletons are distributed in four discrete horizons at the site, representing a recurring accumulation mechanism. Taphonomic analysis points to strong spatial focusing with a rapid death mechanism at sea, before being buried on a barrier-protected supratidal flat. In modern settings, HABs are the only known natural cause for such repeated, multispecies accumulations. This proposed agent suggests that upwelling zones elsewhere in the world should preserve fossil marine vertebrate accumulations in similar modes and densities. PMID:24573855

Large plasma density enhancements occurring in the northern polar region during the 6 April 2000 superstorm

Science.gov (United States)

Horvath, Ildiko; Lovell, Brian C.

2014-06-01

We focus on the ionospheric response of northern high-latitude region to the 6 April 2000 superstorm and aim to investigate how the storm-enhanced density (SED) plume plasma became distributed in the regions of auroral zone and polar cap plus to study the resultant ionospheric features and their development. Multi-instrument observational results combined with model-generated, two-cell convection maps permitted identifying the high-density plasma's origin and the underlying plasma transportation processes. Results show the plasma density feature of polar cap enhancement (PCE; 600 × 103 i+/cm3) appearing for 7 h during the main phase and characterized by increases reaching up to 6 times of the quiet time values. Meanwhile, strong westward convections ( 17,500 m/s) created low plasma densities in a wider region of the dusk cell. Oppositely, small ( 750 m/s) but rigorous westward drifts drove the SED plume plasma through the auroral zone, wherein plasma densities doubled. As the SED plume plasma traveled along the convection streamlines and entered the polar cap, a continuous enhancement of the tongue of ionization (TOI) developed under steady convection conditions. However, convection changes caused slow convections and flow stagnations and thus segmented the TOI feature by locally depleting the plasma in the affected regions of the auroral zone and polar cap. From the strong correspondence of polar cap potential drop and subauroral polarization stream (SAPS), we conclude that the SAPS E-field strength remained strong, and under its prolonged influence, the SED plume provided a continuous supply of downward flowing high-density plasma for the development and maintenance of PCEs.

TUNNEL POINT CLOUD FILTERING METHOD BASED ON ELLIPTIC CYLINDRICAL MODEL

Directory of Open Access Journals (Sweden)

N. Zhu

2016-06-01

Full Text Available The large number of bolts and screws that attached to the subway shield ring plates, along with the great amount of accessories of metal stents and electrical equipments mounted on the tunnel walls, make the laser point cloud data include lots of non-tunnel section points (hereinafter referred to as non-points, therefore affecting the accuracy for modeling and deformation monitoring. This paper proposed a filtering method for the point cloud based on the elliptic cylindrical model. The original laser point cloud data was firstly projected onto a horizontal plane, and a searching algorithm was given to extract the edging points of both sides, which were used further to fit the tunnel central axis. Along the axis the point cloud was segmented regionally, and then fitted as smooth elliptic cylindrical surface by means of iteration. This processing enabled the automatic filtering of those inner wall non-points. Experiments of two groups showed coincident results, that the elliptic cylindrical model based method could effectively filter out the non-points, and meet the accuracy requirements for subway deformation monitoring. The method provides a new mode for the periodic monitoring of tunnel sections all-around deformation in subways routine operation and maintenance.

Abandoned Uranium Mine (AUM) Enforcement Action Mine Points, Navajo Nation, 2016, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This GIS dataset contains point features that represent abandoned uranium mines with EPA enforcement actions as of March 2016 in Navajo Nation. Attributes include...

A comparison of interest point and region detectors on structured, range and texture images

DEFF Research Database (Denmark)

Kazmi, Wajahat; Andersen, Hans Jørgen

2015-01-01

)) and corner based detectors (such as Hessian and Harris with both Affine/Laplace variants, SURF with determinant of Hessian based corners and SIFT with difference of Gaussians) acquired more than 90% mean average precision, whereas on range images, homogeneous region detector did not work well. TLR offered...... and textured images. It is also shown that in a bi-channel approach, combining surface and edge regions (MSER and TLR) boosts the overall performance. Among the descriptors, SIFT and SURF generally offer higher performance but low dimensional descriptors such as Steerable Filters follow closely....

Acceleration of saddle-point searches with machine learning

Energy Technology Data Exchange (ETDEWEB)

Peterson, Andrew A., E-mail: andrew-peterson@brown.edu [School of Engineering, Brown University, Providence, Rhode Island 02912 (United States)

2016-08-21

In atomistic simulations, the location of the saddle point on the potential-energy surface (PES) gives important information on transitions between local minima, for example, via transition-state theory. However, the search for saddle points often involves hundreds or thousands of ab initio force calls, which are typically all done at full accuracy. This results in the vast majority of the computational effort being spent calculating the electronic structure of states not important to the researcher, and very little time performing the calculation of the saddle point state itself. In this work, we describe how machine learning (ML) can reduce the number of intermediate ab initio calculations needed to locate saddle points. Since machine-learning models can learn from, and thus mimic, atomistic simulations, the saddle-point search can be conducted rapidly in the machine-learning representation. The saddle-point prediction can then be verified by an ab initio calculation; if it is incorrect, this strategically has identified regions of the PES where the machine-learning representation has insufficient training data. When these training data are used to improve the machine-learning model, the estimates greatly improve. This approach can be systematized, and in two simple example problems we demonstrate a dramatic reduction in the number of ab initio force calls. We expect that this approach and future refinements will greatly accelerate searches for saddle points, as well as other searches on the potential energy surface, as machine-learning methods see greater adoption by the atomistics community.

Acceleration of saddle-point searches with machine learning

International Nuclear Information System (INIS)

Peterson, Andrew A.

2016-01-01

In atomistic simulations, the location of the saddle point on the potential-energy surface (PES) gives important information on transitions between local minima, for example, via transition-state theory. However, the search for saddle points often involves hundreds or thousands of ab initio force calls, which are typically all done at full accuracy. This results in the vast majority of the computational effort being spent calculating the electronic structure of states not important to the researcher, and very little time performing the calculation of the saddle point state itself. In this work, we describe how machine learning (ML) can reduce the number of intermediate ab initio calculations needed to locate saddle points. Since machine-learning models can learn from, and thus mimic, atomistic simulations, the saddle-point search can be conducted rapidly in the machine-learning representation. The saddle-point prediction can then be verified by an ab initio calculation; if it is incorrect, this strategically has identified regions of the PES where the machine-learning representation has insufficient training data. When these training data are used to improve the machine-learning model, the estimates greatly improve. This approach can be systematized, and in two simple example problems we demonstrate a dramatic reduction in the number of ab initio force calls. We expect that this approach and future refinements will greatly accelerate searches for saddle points, as well as other searches on the potential energy surface, as machine-learning methods see greater adoption by the atomistics community.

Acceleration of saddle-point searches with machine learning.

Science.gov (United States)

Peterson, Andrew A

2016-08-21

In atomistic simulations, the location of the saddle point on the potential-energy surface (PES) gives important information on transitions between local minima, for example, via transition-state theory. However, the search for saddle points often involves hundreds or thousands of ab initio force calls, which are typically all done at full accuracy. This results in the vast majority of the computational effort being spent calculating the electronic structure of states not important to the researcher, and very little time performing the calculation of the saddle point state itself. In this work, we describe how machine learning (ML) can reduce the number of intermediate ab initio calculations needed to locate saddle points. Since machine-learning models can learn from, and thus mimic, atomistic simulations, the saddle-point search can be conducted rapidly in the machine-learning representation. The saddle-point prediction can then be verified by an ab initio calculation; if it is incorrect, this strategically has identified regions of the PES where the machine-learning representation has insufficient training data. When these training data are used to improve the machine-learning model, the estimates greatly improve. This approach can be systematized, and in two simple example problems we demonstrate a dramatic reduction in the number of ab initio force calls. We expect that this approach and future refinements will greatly accelerate searches for saddle points, as well as other searches on the potential energy surface, as machine-learning methods see greater adoption by the atomistics community.

PRODUCTION NETWORKS, AND DIGITAL LOGISTICS AS A TOOL FOR REGIONAL DEVELOPMENT: THE WOOD PROCESSING INDUSTRY IN THE CITY OF BURI, SÃO PAULO

Directory of Open Access Journals (Sweden)

Eunice Helena Sguizzardi Abascal

2010-11-01

Full Text Available In Brazil municipalities and regions face nowadays plenty of challenges to achieve a sustainable development founded in logistic and productive relationship networks. These networks and respective operations require knowledge and domain of productive possibilities and business opportunities that can develop themselves in regional and endogenous territorial scales. These challenges derive of the fact that municipalities are part of many government and administrative regions in brazilian states to actuate in solidary and synergic way, potentializing relationships with respective congeners. Networks formation requests a rigorous knowledge of the socioeconomic conditions, the municipalities and the regions characters, and it requests TIC (Communication and Information Technologies instrumental use, being able to give ways to expand and to know the social actors that are related and their potential partners through digital networks. This type of networks enables a synchronic management of territorial and economic complexities, in real time (just in time. This article analyzes by critical way the causes of socioeconomic depression of Sao Paulo State southwest region, with the objective of identifying the responsible factors of its stagnation. It also analyzes specific characteristics of Buri Municipality that is situated in southwest Sao Paulo State region. Showing business networks formation based on the transformation wood industry. This natural product is available in the region, here we investigate the local development possibilities, productive and logistic networks (Material Networks and we suggest digital networks use. These actions not just only create regional advantages, but indeed releases Sao Paulo metropolis: either its spaces and its circulation highways, unduly congested due vehicle concentration that is responsible by transport, state and federal logistic.

Hierarchical model generation for architecture reconstruction using laser-scanned point clouds

Science.gov (United States)

Ning, Xiaojuan; Wang, Yinghui; Zhang, Xiaopeng

2014-06-01

Architecture reconstruction using terrestrial laser scanner is a prevalent and challenging research topic. We introduce an automatic, hierarchical architecture generation framework to produce full geometry of architecture based on a novel combination of facade structures detection, detailed windows propagation, and hierarchical model consolidation. Our method highlights the generation of geometric models automatically fitting the design information of the architecture from sparse, incomplete, and noisy point clouds. First, the planar regions detected in raw point clouds are interpreted as three-dimensional clusters. Then, the boundary of each region extracted by projecting the points into its corresponding two-dimensional plane is classified to obtain detailed shape structure elements (e.g., windows and doors). Finally, a polyhedron model is generated by calculating the proposed local structure model, consolidated structure model, and detailed window model. Experiments on modeling the scanned real-life buildings demonstrate the advantages of our method, in which the reconstructed models not only correspond to the information of architectural design accurately, but also satisfy the requirements for visualization and analysis.

Detecting multiple moving objects in crowded environments with coherent motion regions

Science.gov (United States)

Cheriyadat, Anil M.; Radke, Richard J.

2013-06-11

Coherent motion regions extend in time as well as space, enforcing consistency in detected objects over long time periods and making the algorithm robust to noisy or short point tracks. As a result of enforcing the constraint that selected coherent motion regions contain disjoint sets of tracks defined in a three-dimensional space including a time dimension. An algorithm operates directly on raw, unconditioned low-level feature point tracks, and minimizes a global measure of the coherent motion regions. At least one discrete moving object is identified in a time series of video images based on the trajectory similarity factors, which is a measure of a maximum distance between a pair of feature point tracks.

Lunch quality and sociodemographic conditions between Brazilian regions

Directory of Open Access Journals (Sweden)

Bartira Mendes Gorgulho

2018-05-01

Full Text Available The objective of this study was to assess the quality of lunch consumed by adults in Brazil and its sociodemographic determinants in each Brazilian region. A cross-sectional study was carried out and a representative sample of regional populations was used. The sample comprised of 16,096 adults from the Brazilian National Dietary Survey, part of the Brazilian Household Budget Survey (POF. The lunch quality was evaluated by applying the main meal quality index (MMQI, comprised of 10 items of equal weights that resulted in a score that ranged from zero to 100 points. Linear regression models measured the association between lunch quality and sociodemographic factors. The average energy consumption at lunch was 704kcal (SD = 300, and the meal quality score mean was 57 points (SE = 0.30. The North Region had the worst MMQI score (56 points, SE = 0.07, while the Central had the best MMQI adjusted score (59 points, SE = 0.05. The MMQI final score was positively associated with male gender and ages between 20-39 years, and was inversely associated with having eight years or more of education, per capita income of at least three minimum wages, and with the consumption of meals prepared away from home. Despite differences among sociodemographic factors, all Brazilian regions had a lunch composed of foods rich in sugars and fats, with insufficient portions of fruits and vegetables, resulting in a low meal quality.

History Matching Through a Smooth Formulation of Multiple-Point Statistics

DEFF Research Database (Denmark)

Melnikova, Yulia; Zunino, Andrea; Lange, Katrine

2014-01-01

and the mismatch with multiple-point statistics. As a result, in the framework of the Bayesian approach, such a solution belongs to a high posterior region. The methodology, while applicable to any inverse problem with a training-image-based prior, is especially beneficial for problems which require expensive......We propose a smooth formulation of multiple-point statistics that enables us to solve inverse problems using gradient-based optimization techniques. We introduce a differentiable function that quantifies the mismatch between multiple-point statistics of a training image and of a given model. We...... show that, by minimizing this function, any continuous image can be gradually transformed into an image that honors the multiple-point statistics of the discrete training image. The solution to an inverse problem is then found by minimizing the sum of two mismatches: the mismatch with data...

Scaling, crossover, and classical behavior in the order parameter equation for coexisting phases of benzene from triple point to critical point

International Nuclear Information System (INIS)

Shimansky, Yu.I.; Shimanskaya, E.T.

1996-01-01

The temperature dependence of the density along the coexistence curve of benzene in the vicinity of the critical point and in a wide temperature range down to the triple point was investigated. The original results as well as literature data were statistically treated. A regression analysis of data on the critical exponents and critical amplitudes used as fitting parameters in a model equations was carried out. An adequate description of the order parameter by the three-term scaling equation in the entire two-phase (liquid-gas) region of benzene was obtained with experimental values of Β O -0.352 ±0.003 and δ = 1.3 ± 0.2, which are inconsistent with the Ising model (Β O = 0.325) and the Wegner exponent (δ = 0.5), respectively. It is shown that the equation with fixed classical exponents does not adequately describe the experimental data even far from the critical point

Improved selection criteria for H II regions, based on IRAS sources

Science.gov (United States)

Yan, Qing-Zeng; Xu, Ye; Walsh, A. J.; Macquart, J. P.; MacLeod, G. C.; Zhang, Bo; Hancock, P. J.; Chen, Xi; Tang, Zheng-Hong

2018-05-01

We present new criteria for selecting H II regions from the Infrared Astronomical Satellite (IRAS) Point Source Catalogue (PSC), based on an H II region catalogue derived manually from the all-sky Wide-field Infrared Survey Explorer (WISE). The criteria are used to augment the number of H II region candidates in the Milky Way. The criteria are defined by the linear decision boundary of two samples: IRAS point sources associated with known H II regions, which serve as the H II region sample, and IRAS point sources at high Galactic latitudes, which serve as the non-H II region sample. A machine learning classifier, specifically a support vector machine, is used to determine the decision boundary. We investigate all combinations of four IRAS bands and suggest that the optimal criterion is log(F_{60}/F_{12})≥ ( -0.19 × log(F_{100}/F_{25})+ 1.52), with detections at 60 and 100 {μ}m. This selects 3041 H II region candidates from the IRAS PSC. We find that IRAS H II region candidates show evidence of evolution on the two-colour diagram. Merging the WISE H II catalogue with IRAS H II region candidates, we estimate a lower limit of approximately 10 200 for the number of H II regions in the Milky Way.

Wrox SharePoint 2010 SharePoint911 three-pack

CERN Document Server

Klindt, Todd; Mason, Jennifer; Rogers, Laura; Drisgill, Randy; Ross, John; Riemann, Larry; Perran, Amanda; Perran, Shane; Sanford, Jacob J; Stubbs, Paul; Caravajal, Steve

2012-01-01

The Wrox SharePoint 2010 SharePoint911 Three-Pack combines the contents of three full e-books written by the experts from SharePoint911.  That's over 1800 pages of hands-on advice from Todd Klindt, Shane Young, Laura Rogers, Randy Drisgill, Jennifer Mason, John Ross, and Larry Riemann, among others. In Beginning SharePoint 2010: Building Business Solutions with SharePoint (ISBN 978-0-470-61789-2) by Amanda Perran, Shane Perran, Jennifer Mason, and Laura Rogers, readers learn the core concepts, terminology, and features of SharePoint 2010. In Professiona

Feasibility study of a novel dew point air conditioning system for China building application

Energy Technology Data Exchange (ETDEWEB)

Zhao, Xudong; Yang, Shuang; Duan, Zhiyin; Riffat, Saffa B. [School of the Built Environment, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom)

2009-09-15

The paper investigated the feasibility of a novel dew point evaporative cooling for air conditioning of buildings in China regions. The issues involved include analyses of China weather conditions, investigation of availability of water for dew point cooling, and assessment of cooling capacity of the system within various regions of China. It is concluded that the dew point system is suitable for most regions of China, particularly northern and west regions of China where the climate is hot and dry during the summer season. It is less suitable for Guangzhou and Shanghai where climates are hot and humid. However, an air pre-treatment process involving a silica-gel dehumidification will enable the technology to be used for these humid areas. Lower humidity results in a higher difference between the dry bulb and dew point of the air, which benefits the system in terms of enhancing its cooling performance. Tap water has adequate temperature to feed the system for cooling and its consumption rate is in the range 2.6-3 litres per kWh cooling output. The cooling output of the system ranges from 1.1 to 4.3 W per m{sup 3}/h air flow rate in China, depending on the region where the system applies. For a unit with 2 kW of cooling output, the required air volume flow rate varies with its application location and is in the range 570-1800 m{sup 3}/h. For a 50 m{sup 2} building with 60 W/m{sup 2} cooling load, if the system operates at working hours, i.e., 09:00 to 17:00 h, its daily water consumption would be in the range of 60-70 litres. Compared with mild or humid climates, the dry and hot climates need less air volume flow rate and less water. (author)

Place branding and nonstandard regionalization in Europe

NARCIS (Netherlands)

Boisen, Martin

2015-01-01

Place branding might, could, and maybe even should play a central role in urban and regional governance. The vantage point of this chapter is that every place is a brand and that the processes of nonstandard regionalization that can be witnessed all over Europe create new places and, thus, new place

Birth and development of active region and chromospheric network

Energy Technology Data Exchange (ETDEWEB)

Kartashova, L G

1975-01-01

Formation and development of 15 active regions of a simple bipolar configuration with small-sized spots and without noticeable penumbras have been studied by the data of observations with a coronograph CA n the centre and wings of the Hsub(a) line. Resolution on the photographs is 2''. The following conclusions have been drawn: first bright details of the active region formed are generated through brightening of bright points of the chromosphere grid; intensification and stretching of dark points of the chromosphere grid results in the formation of fibrous structure in the vicinity of active region; spots appear either between the flocculi points, or near them closer to the centre of the corresponding cell of the chromosphere grid, among dark points of the chromosphere grid no spots are usually formed; in the process of growing of a simple bipolar group the leader and tail spots draw apart together with the chromosphere grid cells, in which they are formed; at the stage of fast growth in the neighbourhood of most large of the groups under studies a formation of arcs or of almost closed contours of the chromosphere grid is observed in the wings of the line. This rearrangement of the chromosphere grid is apparently closely connected with the formation of a fibrous structure around the active region.

THE REGIONAL STRUCTURE OF SERBIA

Directory of Open Access Journals (Sweden)

Marina TODOROVIC

2009-12-01

Full Text Available This paper approaches some of the characteristics of the regional development of Serbia, from the perspective of two models of territorial organization: one is governmental (administrative and statistical, and the other is functional. The imbalances in the levels of development of various territorial units of Serbia (regional disproportions are the consequence of many structural disharmonies, material limitations, and problems with populationstructure, during many years, all worsened by political and economic events at the end of the twentieth century. Also, in this paper we point out the main characteristics of undeveloped regions, the criteria with which we can define them, and a typology of the municipalities inside each such region.

Stability of Equilibrium Points of Fractional Difference Equations with Stochastic Perturbations

Directory of Open Access Journals (Sweden)

Shaikhet Leonid

2008-01-01

Full Text Available It is supposed that the fractional difference equation , has an equilibrium point and is exposed to additive stochastic perturbations type of that are directly proportional to the deviation of the system state from the equilibrium point . It is shown that known results in the theory of stability of stochastic difference equations that were obtained via V. Kolmanovskii and L. Shaikhet general method of Lyapunov functionals construction can be successfully used for getting of sufficient conditions for stability in probability of equilibrium points of the considered stochastic fractional difference equation. Numerous graphical illustrations of stability regions and trajectories of solutions are plotted.

A threshold auto-adjustment algorithm of feature points extraction based on grid

Science.gov (United States)

Yao, Zili; Li, Jun; Dong, Gaojie

2018-02-01

When dealing with high-resolution digital images, detection of feature points is usually the very first important step. Valid feature points depend on the threshold. If the threshold is too low, plenty of feature points will be detected, and they may be aggregated in the rich texture regions, which consequently not only affects the speed of feature description, but also aggravates the burden of following processing; if the threshold is set high, the feature points in poor texture area will lack. To solve these problems, this paper proposes a threshold auto-adjustment method of feature extraction based on grid. By dividing the image into numbers of grid, threshold is set in every local grid for extracting the feature points. When the number of feature points does not meet the threshold requirement, the threshold will be adjusted automatically to change the final number of feature points The experimental results show that feature points produced by our method is more uniform and representative, which avoids the aggregation of feature points and greatly reduces the complexity of following work.

Development of regional growth centres and impact on regional growth: A case study of Thailand’s Northeastern region

Directory of Open Access Journals (Sweden)

Nattapon Sang-arun

2013-01-01

Full Text Available This study investigates the spatial economic structure and inequality in Thailand at the national and regional levels, with a particular focus on the Northeastern region in the period from 1987 to 2007. The study has three main points: 1 examination of the economic structure and inequality at the national level and in the Northeastern region according to the Theil index, 2 determination of regional growth centres and satellite towns by using growth pole theory as a conceptual framework and incorporating spatial interaction analysis and 3 analysis of the relationship between regional growth centres and satellite towns with regard to the impact on growth and inequality. The results show that the Northeastern region is definitely the lagging region in the nation, by both gross domestic product (GDP and gross regional product (GRP per capita. It was therefore selected for a case study. Spatial analysis identified Nakhon Ratchasima, Khon Kaen, Udon Thani and Ubon Ratchathani as regional growth centres. Each of them has its own sphere of influence (or satellite towns, and the total area of regional growth centres and satellite towns are classified as sub-regions. The development of regional growth centres has a direct impact on sub-regional economic growth through economic and social relationships: urbanisation, industrial development, per capita growth, the number of higher educational institutes and so on. However, such growth negatively correlates with economic equality among the provinces in a sub-region. The inequality trend is obviously on an upswing. This study suggests that industrial links between regional growth centres and their satellite towns should be improved in order for regional growth centre development to have a consistently desirable effect on both economic growth and equality. Such a strong process means that the growth of regional growth centres will spread, leading to the development of their surrounding areas.

Inflated Uncertainty in Multimodel-Based Regional Climate Projections

Science.gov (United States)

Madsen, Marianne Sloth; Langen, Peter L.; Boberg, Fredrik; Christensen, Jens Hesselbjerg

2017-11-01

Multimodel ensembles are widely analyzed to estimate the range of future regional climate change projections. For an ensemble of climate models, the result is often portrayed by showing maps of the geographical distribution of the multimodel mean results and associated uncertainties represented by model spread at the grid point scale. Here we use a set of CMIP5 models to show that presenting statistics this way results in an overestimation of the projected range leading to physically implausible patterns of change on global but also on regional scales. We point out that similar inconsistencies occur in impact analyses relying on multimodel information extracted using statistics at the regional scale, for example, when a subset of CMIP models is selected to represent regional model spread. Consequently, the risk of unwanted impacts may be overestimated at larger scales as climate change impacts will never be realized as the worst (or best) case everywhere.

Influences of Deqi on Immediate Analgesia Effect of Needling SP6 (Sanyinjiao in Patients with Primary Dysmenorrhea in Cold and Dampness Stagnation Pattern: Study Protocol for a Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Yu-qi Liu

2015-01-01

Full Text Available Deqi, according to traditional Chinese medicine, is a specific needle sensation during the retention of needles at certain acupoints and is considered to be necessary to produce therapeutic effects from acupuncture. Although some modern researches have showed that Deqi is essential for producing acupuncture analgesia and anesthesia, the data are not enough. It is a paper of a multicenter, randomized controlled study protocol, to evaluate the influences of Deqi on acupuncture SP6 in Cold and Dampness Stagnation pattern primary dysmenorrhea patients, in terms of reducing pain and anxiety, and to find out the relationship between Deqi and the temperature changes at SP6 (Sanyinjiao and CV4 (Guanyuan. The results of this trial will be helpful to explain the role of Deqi in acupuncture analgesia and may provide a new objective index for measuring Deqi in the future study. This trial is registered with ChiCTR-TRC-13003086.

Colliding winds: Interaction regions with strong heat conduction

International Nuclear Information System (INIS)

Imamura, J.N.; Chevalier, R.A.

1984-01-01

The interaction of fast stellar wind with a slower wind from previous mass loss gives rise to a region of hot, shocked gas. We obtain self-similar solutions for the interaction region under the assumptions of constant mass loss rate and wind velocity for the two winds, conversion of energy in the shock region, and either isothermal electrons and adiabatic ions or isothermal electrons ad ions in the shocked region. The isothermal assumption is intended to show the effects of strog heat conduction. The solutions have no heat conduction through the shock waves and assume that the electron and ion temperatures are equilibriated in the shock waves. The one-temperature isothermal solutions have nearly constant density through the shocked region, while the two-temperature solutions are intermediate between the one-temperature adiabatic and isothermal solutions. In the two-temperature solutions, the ion temperature goes to zero at the point where the gas comoves with the shocked region and the density peaks at this point. The solution may qualitatively describe the effects of heat conduction on interaction regions in the solar wind. It will be important to determine whether the assumption of no thermal waves outside the shocked region applies to shock waves in the solar wind

Beginning SharePoint 2010 Administration Windows SharePoint Foundation 2010 and Microsoft SharePoint Server 2010

CERN Document Server

Husman, Göran

2010-01-01

Complete coverage on the latest advances in SharePoint 2010 administration. SharePoint 2010 comprises an abundance of new features, and this book shows you how to take advantage of all SharePoint 2010's many improvements. Written by a four-time SharePoint MVP, Beginning SharePoint 2010 Administration begins with a comparison of SharePoint 2010 compared to the previous version and then examines the differences between WSS 4.0 and MSS 2010. Packed with step-by-step instructions, tips and tricks, and real-world examples, this book dives into the basics of how to install, manage, and administrate

Natural gas treatment: Simultaneous water and hydrocarbon-dew point-control

Energy Technology Data Exchange (ETDEWEB)

Schmidt, T. (Solvay Catalysts GmbH, Hannover (Germany)); Rennemann, D. (Solvay Catalysts GmbH, Hannover (Germany)); Schulz, T. (Solvay Catalysts GmbH, Hannover (Germany))

1993-10-01

Natural gas is a multicomponent mixture of hydrocarbons. The condensation behavior of such mixtures is different from single component systems. The so-called retrograde behavior leads to the observations that saturated vapor (dew point curve) and saturated liquid curve (bubble point curve) are not identical. Between both is a region of saturated phases which even can exist above the critical point. Following this behaviour it is possible that condensation might occur at pressure decrease or at temperature increase, respectively. This phenomenon is undesired in natural gas pipeline networks. Selective removal of higher hydrocarbons by the means of adsorption can change the phase behavior in such a way that condensation does not occur at temperatures and pressures specified for gas distribution. (orig.)

Steady distribution structure of point defects near crystal-melt interface under pulling stop of CZ Si crystal

Science.gov (United States)

Abe, T.; Takahashi, T.; Shirai, K.

2017-02-01

In order to reveal a steady distribution structure of point defects of no growing Si on the solid-liquid interface, the crystals were grown at a high pulling rate, which Vs becomes predominant, and the pulling was suddenly stopped. After restoring the variations of the crystal by the pulling-stop, the crystals were then left in prolonged contact with the melt. Finally, the crystals were detached and rapidly cooled to freeze point defects and then a distribution of the point defects of the as-grown crystals was observed. As a result, a dislocation loop (DL) region, which is formed by the aggregation of interstitials (Is), was formed over the solid-liquid interface and was surrounded with a Vs-and-Is-free recombination region (Rc-region), although the entire crystals had been Vs rich in the beginning. It was also revealed that the crystal on the solid-liquid interface after the prolonged contact with the melt can partially have a Rc-region to be directly in contact with the melt, unlike a defect distribution of a solid-liquid interface that has been growing. This experimental result contradicts a hypothesis of Voronkov's diffusion model, which always assumes the equilibrium concentrations of Vs and Is as the boundary condition for distribution of point defects on the growth interface. The results were disscussed from a qualitative point of view of temperature distribution and thermal stress by the pulling-stop.

May 2002 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from Dana Point to Point La...

September 2002 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from Dana Point to Point La...

Analytic continuation of massless two-loop four-point functions

International Nuclear Information System (INIS)

Gehrmann, T.; Remiddi, E.

2002-01-01

We describe the analytic continuation of two-loop four-point functions with one off-shell external leg and internal massless propagators from the Euclidean region of space-like 1→3 decay to Minkowskian regions relevant to all 1→3 and 2→2 reactions with one space-like or time-like off-shell external leg. Our results can be used to derive two-loop master integrals and unrenormalized matrix elements for hadronic vector-boson-plus-jet production and deep inelastic two-plus-one-jet production, from results previously obtained for three-jet production in electron-positron annihilation. (author)

Bleeding points in cerebral hemorrhage caused by Moyamoya disease in adults

International Nuclear Information System (INIS)

Sasaki, Tatsuya; Sakurai, Yoshiharu; Shimizu, Yukihiko; Ogawa, Akira; Komatsu, Shinro.

1983-01-01

Even before the introduction of CT we reported that the intracranial hemorrhage in Moyamoya disease was not subarachnoid hemorrhage but intraventricular hemorrhage and that the bleeding point was the paraventricular subependymal region of lateral ventricles; these findings were based on our experience with three Moyamoya cases in which ventricular hemorrhage occurred and pseudoaneurysms were revealed in the territory of the posterior choroidal artery. Twelve cases with intracranial hemorrhage caused by Moyamoya disease have now been studied by CT in order to determine (1) whether the hemorrhage is subarachnoid or intraventricular, and (2) where the bleeding point is. In the results for the eight cases for which the CT scan was performed within one day after the onset, intraventricular hemorrhage was shown in all cases. The bleeding point was examined in twelve cases; in four cases it was recognized by initial CT only, but if five cases in which ventricular hemorrhage only appeared in the initial CT,follow-up plain and contrast-enhanced CT were necessary. In a total of nine cases, then, bleeding points were recognized. In one case putaminal hemorrhage penetrated into the lateral ventricle, while in eight cases the intracerebral hematoma was located in the paraventricular region of the lateral ventricle, such as at the head of the caudate nucleus or the thalamus. In some cases, small subependymal hematoma projected into the lateral ventricle. In cases with symptoms of intracranial hemorrhage at the onset, the bleeding points were at the paraventricular parenchyma of the lateral ventricle in almost all cases. (author)

Short-Term Power Load Point Prediction Based on the Sharp Degree and Chaotic RBF Neural Network

Directory of Open Access Journals (Sweden)

Dongxiao Niu

2015-01-01

Full Text Available In order to realize the predicting and positioning of short-term load inflection point, this paper made reference to related research in the field of computer image recognition. It got a load sharp degree sequence by the transformation of the original load sequence based on the algorithm of sharp degree. Then this paper designed a forecasting model based on the chaos theory and RBF neural network. It predicted the load sharp degree sequence based on the forecasting model to realize the positioning of short-term load inflection point. Finally, in the empirical example analysis, this paper predicted the daily load point of a region using the actual load data of the certain region to verify the effectiveness and applicability of this method. Prediction results showed that most of the test sample load points could be accurately predicted.

Regional competitiveness and territorial industrial development in Serbia

Directory of Open Access Journals (Sweden)

Zeković Slavka

2009-01-01

Full Text Available In the paper are investigated the regional competitiveness and the territorial aspects of industry in Serbia. There are analyzed the key recent movement in industrial development of Serbia and macrolocational factors and territorial organization of industry. The research of possible structural changes of industry and identification of its key development sectors is the important component of territorial development analysis in Serbia. This paper points to the kinds and types of industrial zones and industrial parks as fundamental models of regional and urban development of that activity with critical retrospection on the industrial zones in Serbia (greenfield and brownfield industrial locations. There are shown results of evaluation the regional competitiveness from a stand-point of possibilities of industrial development on the regional level (NUTS 3 by comparative analyses and Spider method. Results are used as one of the bases for making preliminary draft of territorial development scenario of this activity in Serbia and for the possible alocation of the future industrial zones and industrial parks in region level.

ALIGNMENT OF POINT CLOUD DSMs FROM TLS AND UAV PLATFORMS

Directory of Open Access Journals (Sweden)

R. A. Persad

2015-08-01

Full Text Available The co-registration of 3D point clouds has received considerable attention from various communities, particularly those in photogrammetry, computer graphics and computer vision. Although significant progress has been made, various challenges such as coarse alignment using multi-sensory data with different point densities and minimal overlap still exist. There is a need to address such data integration issues, particularly with the advent of new data collection platforms such as the unmanned aerial vehicles (UAVs. In this study, we propose an approach to align 3D point clouds derived photogrammetrically from UAV approximately vertical images with point clouds measured by terrestrial laser scanners (TLS. The method begins by automatically extracting 3D surface keypoints on both point cloud datasets. Afterwards, regions of interest around each keypoint are established to facilitate the establishment of scale-invariant descriptors for each of them. We use the popular SURF descriptor for matching the keypoints. In our experiments, we report the accuracies of the automatically derived transformation parameters in comparison to manually-derived reference parameter data.

Spatial determination of magnetic avalanche ignition points

International Nuclear Information System (INIS)

Jaafar, Reem; McHugh, S.; Suzuki, Yoko; Sarachik, M.P.; Myasoedov, Y.; Zeldov, E.; Shtrikman, H.; Bagai, R.; Christou, G.

2008-01-01

Using time-resolved measurements of local magnetization in the molecular magnet Mn 12 -ac, we report studies of magnetic avalanches (fast magnetization reversals) with non-planar propagating fronts, where the curved nature of the magnetic fronts is reflected in the time-of-arrival at micro-Hall sensors placed at the surface of the sample. Assuming that the avalanche interface is a spherical bubble that grows with a radius proportional to time, we are able to locate the approximate ignition point of each avalanche in a two-dimensional cross-section of the crystal. We find that although in most samples the avalanches ignite at the long ends, as found in earlier studies, there are crystals in which ignition points are distributed throughout an entire weak region near the center, with a few avalanches still originating at the ends

Spatial determination of magnetic avalanche ignition points

Energy Technology Data Exchange (ETDEWEB)

Jaafar, Reem; McHugh, S.; Suzuki, Yoko [Physics Department, City College of the City University of New York, New York, NY 10031 (United States); Sarachik, M.P. [Physics Department, City College of the City University of New York, New York, NY 10031 (United States)], E-mail: sarachik@sci.ccny.cuny.edu; Myasoedov, Y.; Zeldov, E.; Shtrikman, H. [Department Condensed Matter Physics, Weizmann Institute of Science, Rehovot 76100 (Israel); Bagai, R.; Christou, G. [Department of Chemistry, University of Florida, Gainesville, FL 32611 (United States)

2008-03-15

Using time-resolved measurements of local magnetization in the molecular magnet Mn{sub 12}-ac, we report studies of magnetic avalanches (fast magnetization reversals) with non-planar propagating fronts, where the curved nature of the magnetic fronts is reflected in the time-of-arrival at micro-Hall sensors placed at the surface of the sample. Assuming that the avalanche interface is a spherical bubble that grows with a radius proportional to time, we are able to locate the approximate ignition point of each avalanche in a two-dimensional cross-section of the crystal. We find that although in most samples the avalanches ignite at the long ends, as found in earlier studies, there are crystals in which ignition points are distributed throughout an entire weak region near the center, with a few avalanches still originating at the ends.

External calibration of GOCE data using regional terrestrial gravity data

Directory of Open Access Journals (Sweden)

Wu Yunlong

2012-08-01

Full Text Available This paper reports on a study of the methodology of external calibration of GOCE data, using regional terrestrial-gravity data. Three regions around the world are selected in the numerical experiments. The result indicates that this calibration method is feasible. The effect is best with an accuracy of scale factor at 10−2 level, in Australia, where the area is smooth and the gravity data points are dense. The accuracy is one order of magnitude lower in both Canada where the area is smooth but the data points are sparse, and Norway, where the area is rather tough and the data points are sparse.

Two-point concrete resistivity measurements: interfacial phenomena at the electrode–concrete contact zone

International Nuclear Information System (INIS)

McCarter, W J; Taha, H M; Suryanto, B; Starrs, G

2015-01-01

Ac impedance spectroscopy measurements are used to critically examine the end-to-end (two-point) testing technique employed in evaluating the bulk electrical resistivity of concrete. In particular, this paper focusses on the interfacial contact region between the electrode and specimen and the influence of contacting medium and measurement frequency on the impedance response. Two-point and four-point electrode configurations were compared and modelling of the impedance response was undertaken to identify and quantify the contribution of the electrode–specimen contact region on the measured impedance. Measurements are presented in both Bode and Nyquist formats to aid interpretation. Concretes mixes conforming to BSEN206-1 and BS8500-1 were investigated which included concretes containing the supplementary cementitious materials fly ash and ground granulated blast-furnace slag. A measurement protocol is presented for the end-to-end technique in terms of test frequency and electrode–specimen contacting medium in order to minimize electrode–specimen interfacial effect and ensure correct measurement of bulk resistivity. (paper)

EXPLORATORY RESEARCH REGARDING ROMANIANS' PERCEPTION ABOUT THE REGIONAL BRAND “MARAMUREª”

Directory of Open Access Journals (Sweden)

Drule Alexandra-Maria

2013-07-01

Full Text Available In recent years, the expansion of touristic activities confirmed the importance of marketing activities in touristic regions. In tourism as well, globalization implies an unlimited number of options, and the traditional elements regarding competition and differences related to price or quality are no longer sufficient in efficiently differentiating the touristic region. A key factor in this sense is represented by the notion of place branding or, to be more precise, regional branding. Theoretical studies on this subject are relatively recent, and fewer compared with studies on traditional brands, for example. A practical research regarding a touristic region can thus provide a series of utile information that marketers can use in elaborating marketing strategies and, specifically, in the branding process. The study's main objective aimed at shaping the regional brand “Maramureº” using mainly projective techniques, scarcely used in studies of this kind in Romania, based on a sample of more than 200 respondents. The information obtained focused on the respondents' perceptions regarding the region of Maramureº as a touristic brand, the associations made, the values attributed to the region in terms of touristic potential, of touristic infrastructure, of weak and strong points of the touristic brand Maramureº, but also elements of the regional image and identity (at this point were considered certain associations with visual elements but also with its personality. By highlighting respondents' subjective and diverse opinions, it was aimed to point out some directions that would eventually guide a new approach of the brand for this touristic region. Also, the results of this study could represent a starting point for a program of regional development, funded through various local or European funds. Furthermore, based on the information obtained from respondents, it has been proposed a new logo of the region, as a first step in running a

The SHOX region and its mutations.

Science.gov (United States)

Capone, L; Iughetti, L; Sabatini, S; Bacciaglia, A; Forabosco, A

2010-06-01

The short stature homeobox-containing (SHOX) gene lies in the pseudoautosomal region 1 (PAR1) that comprises 2.6 Mb of the short-arm tips of both the X and Y chromosomes. It is known that its heterozygous mutations cause Leri-Weill dyschondrosteosis (LWD) (OMIM #127300), while its homozygous mutations cause a severe form of dwarfism known as Langer mesomelic dysplasia (LMD) (OMIM #249700). The analysis of 238 LWD patients between 1998 and 2007 by multiple authors shows a prevalence of deletions (46.4%) compared to point mutations (21.2%). On the whole, deletions and point mutations account for about 67% of LWD patients. SHOX is located within a 1000 kb desert region without genes. The comparative genomic analysis of this region between genomes of different vertebrates has led to the identification of evolutionarily conserved non-coding DNA elements (CNE). Further functional studies have shown that one of these CNE downstream of the SHOX gene is necessary for the expression of SHOX; this is considered to be typical "enhancer" activity. Including the enhancer, the overall mutation of the SHOX region in LWD patients does not hold in 100% of cases. Various authors have demonstrated the existence of other CNE both downstream and upstream of SHOX regions. The resulting conclusion is that it is necessary to reanalyze all LWD/LMD patients without SHOX mutations for the presence of mutations in the 5'- and 3'-flanking SHOX regions.

Camønoen

DEFF Research Database (Denmark)

Gyimóthy, Szilvia; Widtfeld Meged, Jane

2016-01-01

Coastal communities in Denmark have experienced a steady socioeconomic decline, which has further been aggravated by a stagnating tourism and agricultural sector. Within this context, coastal regions are attempting to harness the potentials of the emerging collaborative economy and its communitar......Coastal communities in Denmark have experienced a steady socioeconomic decline, which has further been aggravated by a stagnating tourism and agricultural sector. Within this context, coastal regions are attempting to harness the potentials of the emerging collaborative economy and its...... communitarian business models, such as car-sharing, social dining and peer rental of property. These sharing models thrive primarily in urban settings with a high density of assets, triggering the question: how can sparse and loosely connected coastal resources be mobilized to create value for tourists...... is augmented by a digital platform on which hikers may directly connect with local citizens and book experiences ranging from private dinners to bird-watching and berry-picking. The platform Camønoen.org is hosted by the regional museum, which neither charges for intermediation, nor is responsible for vetting...

Disruption Neutral Point Experiment on Alcator C-Mod

Science.gov (United States)

Granetz, R. S.; Nakamura, Y.

2000-10-01

Disruptions of single-null elongated plasmas generally result in loss of vertical position control, leading to a current quench occurring at the top or bottom of the machine, with all the attendant problems of halo and eddy currents flowing in divertor structures. On JT-60U, it has been found that if the plasma is operated with its magnetic axis at a particular height, called the neutral point, the initial vertical drift after a thermal quench is significantly slower than usual, and sometimes can even be arrested, thereby avoiding a current quench in the divertor region entirely. In an ongoing collaboration between MIT and JAERI, the neutral point concept is being tested in Alcator C-Mod, which has a significantly higher plasma elongation than JT-60U (1.65 vs 1.3). Calculations using TSC predict a neutral point at z~=+1 cm above the midplane (a=22 cm). The existence of a neutral point has now been experimentally confirmed, albeit at a height of z=+2.7 cm. The plasma has remained vertically stable for up to 9 ms after the disruption thermal quench, which in principle, is long enough for the PF control system to respond, if programmed appropriately. In addition, the physics of the neutral point stability on C-Mod appears to be somewhat different than that on JT-60U.

An assessment of the melting, boiling, and critical point data of the alkali metals

International Nuclear Information System (INIS)

Ohse, R.W.; Babelot, J.F.; Magill, J.

1985-01-01

The measured melting, boiling and critical point data of the alkali metals are reviewed. Emphasis has been given to the assessment of the critical point data. The main experimental techniques for measurements in the critical region are described. The selected data are given. Best estimates of the critical constants of lithium are given. (author)

Challenges from variation across regions in cost effectiveness analysis in multi-regional clinical trials

Directory of Open Access Journals (Sweden)

Yunbo Chu

2016-10-01

Full Text Available Economic evaluation in the form of cost-effectiveness analysis has become a popular means to inform decisions in healthcare. With multi-regional clinical trials in a global development program becoming a new venue for drug efficacy testing in recent decades, questions in methods for cost-effectiveness analysis in the multi-regional clinical trials setting also emerge. This paper addresses some challenges from variation across regions in cost effectiveness analysis in multi-regional clinical trials. Several discussion points are raised for further attention and a multi-regional clinical trial example is presented to illustrate the implications in industrial application. A general message is delivered to call for a depth discussion by all stakeholders to reach an agreement on a good practice in cost-effectiveness analysis in the multi-regional clinical trials. Meanwhile, we recommend an additional consideration of cost-effectiveness analysis results based on the clinical evidence from a certain homogeneous population as sensitivity or scenario analysis upon data availability.

Space- and time-resolved diagnostic of line emission from the separatrix region in JET X-point plasmas

International Nuclear Information System (INIS)

Chabert, P.; Breton, C.; DeMichelis, C.; Mattioli, M.; Ramette, J.; Saoutic, B.; Denne, B.; Giannella, R.; Gottardi, N.; Magyar, G.

1989-01-01

The SPEX GISMO VUV spectrometer installed on JET has appeared to be appropriate to study the impurities radiation during X-point operation. Preliminary results have been obtained with 2 of the 3 spectrometers. They concern mainly the light impurities emission, CIII, O VI in the vicinity of the X-point during the transition from L to H mode. The results are reported for both single X and double X discharges and future prospects are assessed. (author) 4 refs., 6 figs

THE APPLICATION OF THE CAPITAL ASSET PRICING MODEL ON THE CROATIAN CAPITAL MARKET

Directory of Open Access Journals (Sweden)

Bojan Tomic

2013-12-01

Full Text Available The paper describes and analyzes the application of the capital asset pricing model (CAPM and the single-index model on the Zagreb stock exchange during the drop in the total trade turnover, and mostly in the trade of equity securities. This model shows through the analysis techniques used to estimate the systematic risk per share compared to the market portfolio. Also, the model quantifies the environment in which a company and its stocks exist, expressing it as risk, or a beta coefficient. Furthermore, with respect to the market stagnation, one can also discuss the usefulness of the model, especially if the quality of the input data is questionable. In this regard, the importance of the proper application and interpretation of the results obtained based on the model during the stagnation of the market, and especially during the stagnation of the trade of equity securities, is gaining even greater importance and significance. On the other hand, the results obtained through the analysis of data point to problems arising during the application of the model. It turns out the main problem of applying the CAPM model is the market index with negative returns during the observation period.

Which hydroelectric potential in your region?

International Nuclear Information System (INIS)

2011-01-01

Illustrated by photos, maps, figures and graphs, this Power Point presentation outlines the important remaining potential of hydroelectricity in France: 10.6 TWh. It indicates how this potential has been assessed and calculated. Even if possibilities exist everywhere (either by building new dams or by exploiting existing weirs), four regions present a higher potential for new works: Rhone-Alpes, Midi-Pyrenees, Auvergne, and Provence-Alpes-Cote d'Azur. Maps indicate the concerned rivers and locations in some regions. Such projects which could boost economic local, regional and national development must be designed while taking planning tools into account (notably the climate-air-energy regional schemes), and rules related to river preservation

Cervical screening in Denmark - a success followed by stagnation

DEFF Research Database (Denmark)

Lynge, Elsebeth; Andersen, Berit; Christensen, Jette

2018-01-01

INTRODUCTION: Despite an intensive screening activity, the incidence of cervical cancer in Denmark has remained stable for the last 15 years, while regional differences have increased. To search for explanations, we investigated possible weaknesses in the screening program. MATERIAL AND METHODS......: Data on the screen-targeted women were retrieved from Statistics Denmark. Data on screening activity were retrieved from the annual reports from 2009 to 2015 on quality of cervical screening. Coverage was calculated as proportion of screen-targeted women with at least one cytology sample within...... recommended time intervals. Insufficient follow-up was calculated as proportion of abnormal and unsatisfactory samples not followed up within recommended time intervals. Diagnostic distribution was calculated for samples with a satisfactory cytology diagnosis. RESULTS: Coverage remained stable at 75...

Address Points - COUNTY_ADDRESS_POINTS_IDHS_IN: Address Points Maintained by County Agencies in Indiana (Indiana Department of Homeland Security, Point feature class)

Data.gov (United States)

NSGIC State | GIS Inventory — COUNTY_ADDRESS_POINTS_IDHS_IN is an ESRI Geodatabase point feature class that contains address points maintained by county agencies in Indiana, provided by personnel...

Boiling points of the superheavy elements 117 and 118

International Nuclear Information System (INIS)

Takahashi, N.

2001-01-01

It has been shown that the relativistic effect on the electrons reveal in the heavy element region. What kind of changes will appear in the heavy elements because of the relativistic effects? Can we observe the changes? We observed that the boiling points of astatine and radon are lower than that extrapolated values from lighter elements in the same groups. Systematic behavior of the elements on the boiling point was examined and a new method for the estimation of the boiling points of the superheavy elements in the halogen and rare gases has been found. The estimated values of the elements 117 and 118 are 618 and 247 K, respectively which are considerably lower than those obtained until now. If these values are correct the production of the superheavy elements with heavy ions reaction may be affected. Further, the chemical properties may be fairly different from the lighter elements. (author)