WorldWideScience

Sample records for stage d1 3-hourly

  1. Regulation of 1,25-dihydroxyvitamin D, receptors by [3H]-1,25-dihydroxyvitamin D3 in cultured cells (T-47D): evidence for receptor upregulation

    International Nuclear Information System (INIS)

    Reinhardt, T.A.; Horst, R.L.

    1986-01-01

    The authors examined the effect of 1,25-(OH) 2 D 3 on receptor concentration in cultured cells (T-47D). Two days prior to experiment, cells were fed with RPMI 1640 + 10% serum and 24-32 hours prior to experiment the media was replaced with RPMI 1640 + 25 mM Hepes + 1% serum. [ 3 H]-1,25-(OH) 2 D 3 +/- 100-fold molar excess cold hormone was used to treat the cells. Occupied receptors were measured in freshly prepared cytosols. Total receptors were measured following a 16-hour incubation of cytosols in the presence of 0.6 nM [ 3 H]-1,25-(OH) 2 D 3 +/- 100-fold molar excess of cold hormone at 4 0 C. Treatment of cell cultures for 16-18 hours with 0.5-1.0 nM [ 3 H]-1,25-(OH) 2 D 3 resulted in a 30-40% receptor occupancy by the hormone and a 2- to 3-fold increase in total cell receptor as compared to vehicle-treated controls. Time course studies showed a rapid increase in total receptors up to 16 hours post-treatment in the face of declining receptor occupancy. Actinomycin D blocked the [ 3 H]-1,25-(OH) 2 D 3 -dependent rise in cell receptor. The physiological significance of this receptor upregulation is not known nor is it known whether upregulation results from synthesis of new receptors and/or is the result of the activation of preformed receptors by a inducible activator protein

  2. Role of combined DWIBS/3D-CE-T1w whole-body MRI in tumor staging: Comparison with PET-CT

    International Nuclear Information System (INIS)

    Manenti, Guglielmo; Cicciò, Carmelo; Squillaci, Ettore; Strigari, Lidia; Calabria, Ferdinando; Danieli, Roberta

    2012-01-01

    Objectives: To assess the diagnostic performance of whole-body magnetic resonance imaging (WB-MRI) by diffusion-weighted whole-body imaging with background body signal suppression (DWIBS) in malignant tumor detection and the potential diagnostic advantages in generating fused DWIBS/3D-contrast enhanced T1w (3D-CE-T1w) images. Methods: 45 cancer patients underwent 18F-FDG PET-CT and WB-MRI for staging purpose. Fused DWIBS/3D-CE T1w images were generated off-line. 3D-CE-T1w, DWIBS images alone and fused with 3D-CE T1w were compared by two readers groups for detection of primary diseases and local/distant metastases. Diagnostic performance between the three WB-MRI data sets was assessed using receiver operating characteristic (ROC) curve analysis. Imaging exams and histopathological results were used as standard of references. Results: Areas under the ROC curves of DWIBS vs. 3D-CE-T1w vs. both sequences in fused fashion were 0.97, 0.978, and 1.00, respectively. The diagnostic performance in tumor detection of fused DWIBS/3D-CE-T1w images were statistically superior to DWIBS (p < 0.001) and 3D-CE-T1w (p ≤ 0.002); while the difference between DWIBS and 3D-CE-T1w did not show statistical significance difference. Detection rates of malignancy did not differ between WB-MRI with DWIBS and 18F-FDG PET-CT. Conclusion: WB-MRI with DWIBS is to be considered as alternative tool to conventional whole-body methods for tumor staging and during follow-up in cancer patients.

  3. Forensic age estimation based on magnetic resonance imaging of third molars: converting 2D staging into 3D staging.

    Science.gov (United States)

    De Tobel, Jannick; Hillewig, Elke; Verstraete, Koenraad

    2017-03-01

    Established methods to stage development of third molars for forensic age estimation are based on the evaluation of radiographs, which show a 2D projection. It has not been investigated whether these methods require any adjustments in order to apply them to stage third molars on magnetic resonance imaging (MRI), which shows 3D information. To prospectively study root stage assessment of third molars in age estimation using 3 Tesla MRI and to compare this with panoramic radiographs, in order to provide considerations for converting 2D staging into 3D staging and to determine the decisive root. All third molars were evaluated in 52 healthy participants aged 14-26 years using MRI in three planes. Three staging methods were investigated by two observers. In sixteen of the participants, MRI findings were compared with findings on panoramic radiographs. Decisive roots were palatal in upper third molars and distal in lower third molars. Fifty-seven per cent of upper third molars were not assessable on the radiograph, while 96.9% were on MRI. Upper third molars were more difficult to evaluate on radiographs than on MRI (p third molars were equally assessable on both imaging techniques (93.8% MRI, 98.4% radiograph), with no difference in level of difficulty (p = .375). Inter- and intra-observer agreement for evaluation was higher in MRI than in radiographs. In both imaging techniques lower third molars showed greater inter- and intra-observer agreement compared to upper third molars. MR images in the sagittal plane proved to be essential for staging. In age estimation, 3T MRI of third molars could be valuable. Some considerations are, however, necessary to transfer known staging methods to this 3D technique.

  4. Embryonic staging using a 3D virtual reality system

    NARCIS (Netherlands)

    C.M. Verwoerd-Dikkeboom (Christine); A.H.J. Koning (Anton); P.J. van der Spek (Peter); N. Exalto (Niek); R.P.M. Steegers-Theunissen (Régine)

    2008-01-01

    textabstractBACKGROUND: The aim of this study was to demonstrate that Carnegie Stages could be assigned to embryos visualized with a 3D virtual reality system. METHODS: We analysed 48 3D ultrasound scans of 19 IVF/ICSI pregnancies at 7-10 weeks' gestation. These datasets were visualized as 3D

  5. Fucoxanthin exerts differing effects on 3T3-L1 cells according to differentiation stage and inhibits glucose uptake in mature adipocytes

    International Nuclear Information System (INIS)

    Kang, Seong-Il; Ko, Hee-Chul; Shin, Hye-Sun; Kim, Hyo-Min; Hong, Youn-Suk; Lee, Nam-Ho; Kim, Se-Jae

    2011-01-01

    Highlights: → Fucoxanthin enhances 3T3-L1 adipocyte differentiation at an early stage. → Fucoxanthin inhibits 3T3-L1 adipocyte differentiation at intermediate and late stages. → Fucoxanthin attenuates glucose uptake by inhibiting the phosphorylation of IRS in mature 3T3-L1 adipocytes. → Fucoxanthin exerts its anti-obesity effect by inhibiting the differentiation of adipocytes at both intermediate and late stages, as well as glucose uptake in mature adipocytes. -- Abstract: Progression of 3T3-L1 preadipocyte differentiation is divided into early (days 0-2, D0-D2), intermediate (days 2-4, D2-D4), and late stages (day 4 onwards, D4-). In this study, we investigated the effects of fucoxanthin, isolated from the edible brown seaweed Petalonia binghamiae, on adipogenesis during the three differentiation stages of 3T3-L1 preadipocytes. When fucoxanthin was applied during the early stage of differentiation (D0-D2), it promoted 3T3-L1 adipocyte differentiation, as evidenced by increased triglyceride accumulation. At the molecular level, fucoxanthin increased protein expression of peroxisome proliferator-activated receptor γ (PPARγ), CCAAT/enhancer-binding protein α (C/EBPα), sterol regulatory element-binding protein 1c (SREBP1c), and aP2, and adiponectin mRNA expression, in a dose-dependent manner. However, it reduced the expression of PPARγ, C/EBPα, and SREBP1c during the intermediate (D2-D4) and late stages (D4-D7) of differentiation. It also inhibited the uptake of glucose in mature 3T3-L1 adipocytes by reducing the phosphorylation of insulin receptor substrate 1 (IRS-1). These results suggest that fucoxanthin exerts differing effects on 3T3-L1 cells of different differentiation stages and inhibits glucose uptake in mature adipocytes.

  6. myo-Inositol synthesis from [1-3H]glucose in Phaseolus vulgaris L. during early stages of germination

    International Nuclear Information System (INIS)

    Sasaki, K.; Taylor, I.E.P.

    1986-01-01

    Radiolabeled D-[1- 3 H]glucose was fed by imbibition under sterile conditions to bean (Phaseolus vulgaris L.) seeds. After 72 and 96 hours of feeding, the 3 H was located in uronic acid and pentose residues as well as hexose residues of cell wall polysaccharides in growing hypocotyl and root. Free myo-inositol present in cotyledons, hypocotyl, and root also contained 3 H, showing that de novo synthesis of myo-inositol from [1- 3 H]glucose did occur during the first 72 hours of germination. More than 90% of the labeled, free myo-inositol was present in the cotyledons. The 3 H percentage in trifluoroacetic acid-soluble arabinaose residues of cell wall polysaccharides from 72-hour-old bean hypocotyls was only half of their mole percentage. On the other hand, 3 H percentages in hexose residues were higher than their mole percentages. The results suggest that myo-inositol is synthesized from reserve sugars during the very early stages of germination, and that the newly synthesized myo-inositol, as well as that stored in cotyledons, can be used for the construction of new hypocotyl and root cell wall polysaccharides after conversion into uronic acids and pentoses via the myo-inositol oxidation pathway

  7. A Two-Stage Framework for 3D Face Reconstruction from RGBD Images.

    Science.gov (United States)

    Wang, Kangkan; Wang, Xianwang; Pan, Zhigeng; Liu, Kai

    2014-08-01

    This paper proposes a new approach for 3D face reconstruction with RGBD images from an inexpensive commodity sensor. The challenges we face are: 1) substantial random noise and corruption are present in low-resolution depth maps; and 2) there is high degree of variability in pose and face expression. We develop a novel two-stage algorithm that effectively maps low-quality depth maps to realistic face models. Each stage is targeted toward a certain type of noise. The first stage extracts sparse errors from depth patches through the data-driven local sparse coding, while the second stage smooths noise on the boundaries between patches and reconstructs the global shape by combining local shapes using our template-based surface refinement. Our approach does not require any markers or user interaction. We perform quantitative and qualitative evaluations on both synthetic and real test sets. Experimental results show that the proposed approach is able to produce high-resolution 3D face models with high accuracy, even if inputs are of low quality, and have large variations in viewpoint and face expression.

  8. Has 3-D conformal radiotherapy (3D CRT) improved the local tumour control for stage I non-small cell lung cancer?

    International Nuclear Information System (INIS)

    Lagerwaard, Frank J.; Senan, Suresh; Meerbeeck, Jan P. van; Graveland, Wilfried J.

    2002-01-01

    Aims and background: The high local failure rates observed after radiotherapy in stage I non-small cell lung cancer (NSCLC) may be improved by the use of 3-dimensional conformal radiotherapy (3D CRT). Materials and methods: The case-records of 113 patients who were treated with curative 3D CRT between 1991 and 1999 were analysed. No elective nodal irradiation was performed, and doses of 60 Gy or more, in once-daily fractions of between 2 and 3 Gy, were prescribed. Results: The median actuarial survival of patients was 20 months, with 1-, 3- and 5-year survival of 71, 25 and 12%, respectively. Local disease progression was the cause of death in 30% of patients, and 22% patients died from distant metastases. Grade 2-3 acute radiation pneumonitis (SWOG) was observed in 6.2% of patients. The median actuarial local progression-free survival (LPFS) was 27 months, with 85 and 43% of patients free from local progression at 1 and 3 years, respectively. Endobronchial tumour extension significantly influenced LPFS, both on univariate (P=0.023) and multivariate analysis (P=0.023). The median actuarial cause-specific survival (CSS) was 19 months, and the respective 1- and 3-year rates were 72 and 30%. Multivariate analysis showed T2 classification (P=0.017) and the presence of endobronchial tumour extension (P=0.029) to be adverse prognostic factors for CSS. On multivariate analysis, T-stage significantly correlated with distant failure (P=0.005). Conclusions: Local failure rates remain substantial despite the use of 3D CRT for stage I NSCLC. Additional improvements in local control can come about with the use of radiation dose escalation and approaches to address the problem of tumour mobility

  9. High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing.

    Science.gov (United States)

    Kuang, Xiao; Zhao, Zeang; Chen, Kaijuan; Fang, Daining; Kang, Guozheng; Qi, Hang Jerry

    2018-04-01

    Design and direct fabrication of high-performance thermosets and composites via 3D printing are highly desirable in engineering applications. Most 3D printed thermosetting polymers to date suffer from poor mechanical properties and low printing speed. Here, a novel ink for high-speed 3D printing of high-performance epoxy thermosets via a two-stage curing approach is presented. The ink containing photocurable resin and thermally curable epoxy resin is used for the digital light processing (DLP) 3D printing. After printing, the part is thermally cured at elevated temperature to yield an interpenetrating polymer network epoxy composite, whose mechanical properties are comparable to engineering epoxy. The printing speed is accelerated by the continuous liquid interface production assisted DLP 3D printing method, achieving a printing speed as high as 216 mm h -1 . It is also demonstrated that 3D printing structural electronics can be achieved by combining the 3D printed epoxy composites with infilled silver ink in the hollow channels. The new 3D printing method via two-stage curing combines the attributes of outstanding printing speed, high resolution, low volume shrinkage, and excellent mechanical properties, and provides a new avenue to fabricate 3D thermosetting composites with excellent mechanical properties and high efficiency toward high-performance and functional applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Effect of 24,25-dihydroxyvitamin D3 on 1,25-dihydroxyvitamin D3 [1,25-(OH)2D3] metabolism in vitamin D-deficient rats infused with 1,25-(OH)2D3

    International Nuclear Information System (INIS)

    Yamato, H.; Matsumoto, T.; Fukumoto, S.; Ikeda, K.; Ishizuka, S.; Ogata, E.

    1989-01-01

    Previous studies revealed that administration of 24,25-dihydroxyvitamin D3 [24,25-(OH)2D3] to calcium (Ca)-deficient rats causes a dose-dependent reduction in markedly elevated serum 1,25-(OH)2D3 level. Although the results suggested that the metabolism of 1,25-(OH)2D3 was accelerated by 24,25-(OH)2D3, those experiments could not define whether the enhanced metabolism of 1,25-(OH)2D3 played a role in the reduction in the serum 1,25-(OH)2D3 level. In the present study, in order to address this issue more specifically, serum 1,25-(OH)2D3 was maintained solely by exogenous administration through miniosmotic pumps of 1,25-(OH)2D3 into vitamin D-deficient rats. Thus, by measuring the serum 1,25-(OH)2D3 concentration, the effect of 24,25-(OH)2D3 on the MCR of 1,25-(OH)2D3 could be examined. Administration of 24,25-(OH)2D3 caused a dose-dependent enhancement in the MCR of 1,25-(OH)2D3, and 1 microgram/100 g rat.day 24,25-(OH)2D3, which elevated serum 24,25-(OH)2D3 to 8.6 +/- 1.3 ng/ml, significantly increased MCR and suppressed serum levels of 1,25-(OH)2D3. The effect of 24,25-(OH)2D3 on 1,25-(OH)2D3 metabolism developed with a rapid time course, and the recovery of iv injected [1 beta-3H]1,25-(OH)2D3 in blood was significantly reduced within 1 h. In addition, there was an increase in radioactivity in the water-soluble fraction of serum as well as in urine, suggesting that 1,25-(OH)2D3 is rapidly degraded to a water-soluble metabolite(s). Furthermore, the reduction in serum 1,25-(OH)2D3 was associated with a reduction in both serum and urinary Ca levels. Because the conversion of [3H]24,25-(OH)2D3 to [3H]1,24,25-(OH)2D3 or other metabolites was minimal in these rats, 24,25-(OH)2D3 appears to act without being converted into other metabolites. These results demonstrate that 24,25-(OH)2D3 rapidly stimulates the metabolism of 1,25-(OH)2D3 and reduces its serum level

  11. Signal alteration of the cochlear perilymph on 3 different sequences after intratympanic Gd-DTPA administration at 3 tesla. Comparison of 3D-FLAIR, 3D-T1-weighted imaging, and 3D-CISS

    International Nuclear Information System (INIS)

    Yamazaki, Masahiro; Naganawa, Shinji; Kawai, Hisashi; Nihashi, Takashi; Nakashima, Tsutomu

    2010-01-01

    Three-dimensional fluid-attenuated inversion recovery (3D-FLAIR) imaging after intratympanic gadolinium injection is useful for pathophysiologic and morphologic analysis of the inner ear. However, statistical analysis of differences in inner ear signal intensity among 3D-FLAIR and other sequences has not been reported. We evaluated the signal intensity of cochlear fluid on each of 3D-FLAIR, 3D-T 1 -weighted imaging (T 1 WI), and 3D-constructive interference in the steady state (CISS) to clarify the differences in contrast effect among these 3 sequences using intratympanic gadolinium injection. Twenty-one patients underwent 3D-FLAIR, 3D-T 1 WI, and 3D-CISS imaging at 3 tesla 24 hours after intratympanic injection of gadolinium. We determined regions of interest of the cochleae (C) and medulla oblongata (M) on each image, evaluated the signal intensity ratio between C and M (CM ratio), and determined the ratio of cochlear signal intensity of the injected side to that of the non-injected side (contrast value). The CM ratio of the injected side (3.00±1.31, range, 0.53 to 4.88, on 3D-FLAIR; 0.83±0.30, range, 0.36 to 1.58 on 3D-T 1 WI) was significantly higher than that of the non-injected side (0.52±0.14, range, 0.30 to 0.76 on 3D-FLAIR; 0.49±0.11, range, 0.30 to 0.71 on 3D-T 1 WI) on 3D-FLAIR and 3D-T 1 WI (P 1 WI (1.73±0.60 range, 0.98 to 3.09) (P<0.001). The 3D-FLAIR sequence is the most sensitive for observing alteration in inner ear fluid signal after intratympanic gadolinium injection. Our results warrant use of 3D-FLAIR as a sensitive imaging technique to clarify the pathological and morphological mechanisms of disorders of the inner ear. (author)

  12. GPM Level 3 IMERG Half Hourly 0.1 x 0.1 degree V03

    Data.gov (United States)

    National Aeronautics and Space Administration — This Directory Interchange Format (DIF) describes a collection of fields for the GPM Level 3 IMERG Final Half Hourly 0.1 x 0.1 degree V03 (GPM_3IMERGHH) at the NASA...

  13. 25-Hydroxyvitamin D3 1-Alpha-Hydroxylase-Dependent Stimulation of Renal Klotho Expression by Spironolactone

    Directory of Open Access Journals (Sweden)

    Ioana Alesutan

    2013-11-01

    Full Text Available Background: Klotho, a transmembrane protein, protease and hormone mainly expressed in kidney, is required for the suppression of 1,25(OH2D3-generating 25-hydroxyvitamin D3 1-alpha-hydroxylase (Cyp27b1 by FGF23. Conversely, 1,25(OH2D3 stimulates, by activating the vitamin D3 receptor (Vdr, the expression of klotho, thus establishing a negative feedback loop. Klotho protects against renal and vascular injury. Klotho deficiency accelerates aging and early death, effects at least partially due to excessive formation of 1,25(OH2D3 and subsequent hyperphosphatemia. Klotho expression is inhibited by aldosterone. The present study explored the interaction of aldosterone and DOCA as well as the moderately selective mineralocorticoid receptor antagonist spironolactone on klotho expression. Methods: mRNA levels were determined utilizing quantitative RT-PCR in human embryonic kidney cells (HEK293 or in renal tissues from mice without or with prior mineralocorticoid (aldosterone or DOCA and/or spironolactone treatment. In HEK293 cells, protein levels were determined by western blotting. The experiments in HEK293 cells were performed without or with silencing of CYP27B1, of vitamin D3 receptor (VDR or of mineralocorticoid receptor (NR3C2. Results: In HEK293 cells aldosterone and in mice DOCA significantly decreased KLOTHO gene expression, effects opposed by spironolactone treatment. Spironolactone treatment alone significantly increased KLOTHO and CYP27B1 transcript levels in HEK293 cells (24 hours and mice (8 hours or 5 days. Moreover, spironolactone significantly increased klotho and CYP27B1 protein levels in HEK293 cells (48 hours. Reduced NR3C2 expression following silencing did not significantly affect KLOTHO and CYP27B1 transcript levels in presence or absence of spironolactone. Silencing of CYP27B1 and VDR significantly blunted the stimulating effect of spironolactone on KLOTHO mRNA levels in HEK293 cells. Conclusion: Besides blocking the effects of

  14. Multi-stage 3D-2D registration for correction of anatomical deformation in image-guided spine surgery

    Science.gov (United States)

    Ketcha, M. D.; De Silva, T.; Uneri, A.; Jacobson, M. W.; Goerres, J.; Kleinszig, G.; Vogt, S.; Wolinsky, J.-P.; Siewerdsen, J. H.

    2017-06-01

    A multi-stage image-based 3D-2D registration method is presented that maps annotations in a 3D image (e.g. point labels annotating individual vertebrae in preoperative CT) to an intraoperative radiograph in which the patient has undergone non-rigid anatomical deformation due to changes in patient positioning or due to the intervention itself. The proposed method (termed msLevelCheck) extends a previous rigid registration solution (LevelCheck) to provide an accurate mapping of vertebral labels in the presence of spinal deformation. The method employs a multi-stage series of rigid 3D-2D registrations performed on sets of automatically determined and increasingly localized sub-images, with the final stage achieving a rigid mapping for each label to yield a locally rigid yet globally deformable solution. The method was evaluated first in a phantom study in which a CT image of the spine was acquired followed by a series of 7 mobile radiographs with increasing degree of deformation applied. Second, the method was validated using a clinical data set of patients exhibiting strong spinal deformation during thoracolumbar spine surgery. Registration accuracy was assessed using projection distance error (PDE) and failure rate (PDE  >  20 mm—i.e. label registered outside vertebra). The msLevelCheck method was able to register all vertebrae accurately for all cases of deformation in the phantom study, improving the maximum PDE of the rigid method from 22.4 mm to 3.9 mm. The clinical study demonstrated the feasibility of the approach in real patient data by accurately registering all vertebral labels in each case, eliminating all instances of failure encountered in the conventional rigid method. The multi-stage approach demonstrated accurate mapping of vertebral labels in the presence of strong spinal deformation. The msLevelCheck method maintains other advantageous aspects of the original LevelCheck method (e.g. compatibility with standard clinical workflow, large

  15. Involved-Site Image-Guided Intensity Modulated Versus 3D Conformal Radiation Therapy in Early Stage Supradiaphragmatic Hodgkin Lymphoma

    Energy Technology Data Exchange (ETDEWEB)

    Filippi, Andrea Riccardo, E-mail: andreariccardo.filippi@unito.it [Department of Oncology, University of Torino, Torino (Italy); Ciammella, Patrizia [Radiation Therapy Unit, Department of Oncology and Advanced Technology, ASMN Hospital IRCCS, Reggio Emilia (Italy); Piva, Cristina; Ragona, Riccardo [Department of Oncology, University of Torino, Torino (Italy); Botto, Barbara [Hematology, Città della Salute e della Scienza, Torino (Italy); Gavarotti, Paolo [Hematology, University of Torino and Città della Salute e della Scienza, Torino (Italy); Merli, Francesco [Hematology Unit, ASMN Hospital IRCCS, Reggio Emilia (Italy); Vitolo, Umberto [Hematology, Città della Salute e della Scienza, Torino (Italy); Iotti, Cinzia [Radiation Therapy Unit, Department of Oncology and Advanced Technology, ASMN Hospital IRCCS, Reggio Emilia (Italy); Ricardi, Umberto [Department of Oncology, University of Torino, Torino (Italy)

    2014-06-01

    Purpose: Image-guided intensity modulated radiation therapy (IG-IMRT) allows for margin reduction and highly conformal dose distribution, with consistent advantages in sparing of normal tissues. The purpose of this retrospective study was to compare involved-site IG-IMRT with involved-site 3D conformal RT (3D-CRT) in the treatment of early stage Hodgkin lymphoma (HL) involving the mediastinum, with efficacy and toxicity as primary clinical endpoints. Methods and Materials: We analyzed 90 stage IIA HL patients treated with either involved-site 3D-CRT or IG-IMRT between 2005 and 2012 in 2 different institutions. Inclusion criteria were favorable or unfavorable disease (according to European Organization for Research and Treatment of Cancer criteria), complete response after 3 to 4 cycles of an adriamycin- bleomycin-vinblastine-dacarbazine (ABVD) regimen plus 30 Gy as total radiation dose. Exclusion criteria were chemotherapy other than ABVD, partial response after ABVD, total radiation dose other than 30 Gy. Clinical endpoints were relapse-free survival (RFS) and acute toxicity. Results: Forty-nine patients were treated with 3D-CRT (54.4%) and 41 with IG-IMRT (45.6%). Median follow-up time was 54.2 months for 3D-CRT and 24.1 months for IG-IMRT. No differences in RFS were observed between the 2 groups, with 1 relapse each. Three-year RFS was 98.7% for 3D-CRT and 100% for IG-IMRT. Grade 2 toxicity events, mainly mucositis, were recorded in 32.7% of 3D-CRT patients (16 of 49) and in 9.8% of IG-IMRT patients (4 of 41). IG-IMRT was significantly associated with a lower incidence of grade 2 acute toxicity (P=.043). Conclusions: RFS rates at 3 years were extremely high in both groups, albeit the median follow-up time is different. Acute tolerance profiles were better for IG-IMRT than for 3D-CRT. Our preliminary results support the clinical safety and efficacy of advanced RT planning and delivery techniques in patients affected with early stage HL, achieving complete

  16. Hyperfractionated 3D conformal radiotherapy and concurrent chemotherapy for unresectable stage III non-small cell lung cancer

    International Nuclear Information System (INIS)

    Choi, E.K.; Ahn, S.D.; Yi, B.Y.; Chang, H.S.; Lee, J.H.; Suh, C.W.; Lee, J.S.; Kim, S.H.; Koh, Y.S.; Kim, W.S.; Kim, D.S.; Kim, W.D.; Sohn, K.H.

    1997-01-01

    Purpose/Objective: This phase II study has been conducted to determine the feasibility, toxicity, response rate, local control, distant metastasis, and survival of hyperfractionated 3D conformal radiotherapy and concurrent chemotherapy with mitomycin C, vinblastine, and cisplatin in unresectable stage III non-small cell lung cancer (NSCLC), and also to find the most ideal 3D conformal radiotherapy technique. Materials and Methods: From Aug 1993, 173 patients with unresectable stage III NSCLC were entered into this trial and 146 (84%) completed the treatment. Hyperfractionated radiotherapy was given to a total dose of 65-70 Gy (120 cGy/fx, bid) with concurrent 2 cycles of MVP chemotherapy (Mitomycin C 6 mg/m 2 d2 and d29, Vinblastine 6 mg/m 2 d2 and d29, Cisplatin 60 mg/m 2 d1 and d28). Of these 146 patients who completed the treatment, 78 received noncoplanar 3D conformal radiotherapy using 4-6 fields and 17 received coplanar segmented conformal radiotherapy. Clinical tumor response was assessed one month after the completion of radiotherapy by computerized tomography (CT) scan. Toxicity was graded by RTOG and SWOG criteria. Normal tissue complication probability (NTCP) for lung was calculated to find the correlation with radiation pneumonitis. Results: Nineteen (13%) had stage IIIa and 127 (87%) had IIIb disease including 16 with pleural effusion and 20 with supraclavicular lymph node metastases. Response rate was 74%, including 20% complete response and 54% partial response. With a minimum follow up of 12 months, overall survival was 60% at 1 year, 30% at 2 years and median survival was 15 months. Patients achieving a complete response (n=29) had a 2-year overall survival of 46.5% compared to 28.7% for partial responders (n=79) (p=.001). Actuarial local control was 66.7% at 1 year and 43.7% at 2 years. Actuarial distant free survival was 52.3% at 1 year and 39.8% at 2 years. Major hematologic toxicity (Gr 3-4) occurred in 33% of the patients but treatment delay

  17. tavg3_3d_chm_Fe: MERRA Chem 3D IAU, Precip Mass Flux, Time average 3-hourly 1.25 x 1 degree V5.2.0 (MAT3FECHM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3FECHM or tavg3_3d_chm_Fe data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layers edges that is time averaged, 3D model...

  18. Galectin-3 and cyclin D1 expression in non-small cell lung cancer

    Directory of Open Access Journals (Sweden)

    Gołecki Marcin

    2011-10-01

    Full Text Available Abstract Introduction Lung cancer is a major cause of mortality and morbidity worldwide. Galectin-3 is multifunctional protein, which is involved in regulation of cell growth, cell adhesion, cell proliferation, angiogenesis and apoptosis. Cyclin D1 together with other cyclin plays an important role in cell cycle control. Cyclin D1 regulates the G1-to-S phase transition. The aim of this study was the evaluation of correlations between clinicopathological findings and cyclin D1 and galectin-3 expression in non-small cell lung cancer (NSCLC. We wanted also to analyze the prognostic value of cyclin D1 and galectin-3 expression. Moreover we tried to evaluate the correlations between galectin-3 and cyclin D1 expression in tumor tissue. Materials and methods We used the immunochemistry method to investigate the expression of galectin-3 and cyclin D1 in the paraffin-embedded tumor tissue of 47 patients (32 men and 15 women; mean age 59.34 ± 8.90. years. We used monoclonal antibodies to cyclin D1 (NCL-L-cyclin D1-GM clone P2D11F11 NOVO CASTRA and to galectin-3 (mouse monoclonal antibody NCL-GAL3 NOVO CASTRA. Results Galectin-3 expression was positive in 18 cases (38.29% and cyclin D1 in 39 (82.97%. We showed only weak trend, that galectin-3 expression was lower in patients without lymph node involvement (p = 0.07 and cyclin D1 expression was higher in this group (p = 0.080. We didn't reveal differences in cyclin D1 and galectin-3 expression in SCC and adenocarcinoma patients. We didn't demonstrated also differences in galectin-3 and cyclin D1 expression depending on disease stage. Moreover we analyzed the prognostic value of cyclin D1 expression and galectin-3 in all examinated patients and separately in SCC and in adenocarcinoma and in all stages, but we didn't find any statistical differences. We demonstrated that in galectin-3 positive tumors cyclin D1 expression was higher (96.55% vs 61.11%, Chi2 Yatesa 7.53, p = 0.0061 and we revealed negative

  19. tavg3_3d_chm_Fv: MERRA Chem 3D IAU States Cloud Precip, Time average 3-hourly 1.25 x 1.25 degree V5.2.0 (MAT3FVCHM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3FVCHM or tavg3_3d_chm_Fv data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layers file that is time averaged, 3D model...

  20. Isomyosin expression patterns in tubular stages of chicken heart development: a 3-D immunohistochemical analysis

    NARCIS (Netherlands)

    de Jong, F.; Geerts, W. J.; Lamers, W. H.; Los, J. A.; Moorman, A. F.

    1987-01-01

    The 3-D distribution of atrial and ventricular isomyosins is analysed in tubular chicken hearts (stage 12+ to 17 (H/H)) using antibodies specific for adult chicken atrial and ventricular myosin heavy chains, respectively. At stage 12+ (H/H) all myocytes express the atrial isomyosin; furthermore, all

  1. 1α,25(OH2D3 Induces Actin Depolymerization in Endometrial Carcinoma Cells by Targeting RAC1 and PAK1

    Directory of Open Access Journals (Sweden)

    Ni Zeng

    2016-12-01

    Full Text Available Background: Cell proliferation and motility require actin reorganization, which is under control of various signalling pathways including ras-related C3 botulinum toxin substrate 1 (RAC1, p21 protein-activated kinase 1 (PAK1 and actin related protein 2 (ARP2. Tumour cell proliferation is modified by 1α,25-Dihydroxy-Vitamin D3 (1α,25(OH2D3, a steroid hormone predominantly known for its role in calcium and phosphorus metabolism. The present study explored whether 1α,25(OH2D3 modifies actin cytoskeleton in Ishikawa cells, a well differentiated endometrial carcinoma cell line. Methods: To this end, actin cytoskeleton was visualized by confocal microscopy. Globular over filamentous actin ratio was determined utilizing Western blotting and flow cytometry, transcript levels by qRT-PCR and protein abundance by immunoblotting. Results: A 24 hour treatment with 1α,25(OH2D3 (100 nM significantly decreased RAC1 and PAK1 transcript levels and activity, decreased ARP2 protein levels and depolymerized actin. The effect of 1α,25(OH2D3 on actin polymerization was mimicked by pharmacological inhibition of RAC1 and PAK1. Conclusions: 1α,25(OH2D3 leads to disruption of RAC1 and PAK1 activity with subsequent actin depolymerization of endometrial carcinoma cells.

  2. 39 CFR 959.3 - Office, business hours.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Office, business hours. 959.3 Section 959.3 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO THE PRIVATE EXPRESS STATUTES § 959.3 Office, business hours. The offices of the officials mentioned in these rules are...

  3. MERRA 3D IAU Tendency, Ozone, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPODT or tavg3_3d_odt_Cp data product is the MERRA Data Assimilation System 3-Dimensional ozone tendencies that is time averaged on pressure levels at a...

  4. MERRA 3D IAU Diagnostic, Turbulence, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPTRB or tavg3_3d_trb_Cp data product is the MERRA Data Assimilation System 3-Dimensional turbulence diagnostic that is time averaged on pressure levels at a...

  5. MERRA 3D IAU Diagnostic, Radiation, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPRAD or tavg3_3d_rad_Cp data product is the MERRA Data Assimilation System 3-Dimensional radiation diagnostic that is time averaged on pressure levels at a...

  6. A Two-stage Improvement Method for Robot Based 3D Surface Scanning

    Science.gov (United States)

    He, F. B.; Liang, Y. D.; Wang, R. F.; Lin, Y. S.

    2018-03-01

    As known that the surface of unknown object was difficult to measure or recognize precisely, hence the 3D laser scanning technology was introduced and used properly in surface reconstruction. Usually, the surface scanning speed was slower and the scanning quality would be better, while the speed was faster and the quality would be worse. In this case, the paper presented a new two-stage scanning method in order to pursuit the quality of surface scanning in a faster speed. The first stage was rough scanning to get general point cloud data of object’s surface, and then the second stage was specific scanning to repair missing regions which were determined by chord length discrete method. Meanwhile, a system containing a robotic manipulator and a handy scanner was also developed to implement the two-stage scanning method, and relevant paths were planned according to minimum enclosing ball and regional coverage theories.

  7. A 1D version of EllipSys

    DEFF Research Database (Denmark)

    van der Laan, Paul; Sørensen, Niels N.

    2017-01-01

    A one-dimensional version of EllipSys, labeled as EllipSys1D is presented. Three atmospheric boundary layer test cases are used to show that results of EllipSys1D are exactly the same or very similar as results of EllipSys3D, while EllipSys1D uses 3 to 4 orders of magnitude less CPU hours compared...

  8. Potencies of vitamin D analogs, 1α-hydroxyvitamin D3 , 1α-hydroxyvitamin D2 and 25-hydroxyvitamin D3 , in lowering cholesterol in hypercholesterolemic mice in vivo.

    Science.gov (United States)

    Quach, Holly P; Dzekic, Tamara; Bukuroshi, Paola; Pang, K Sandy

    2018-04-01

    Vitamin D 3 and the synthetic vitamin D analogs, 1α-hydroxyvitamin D 3 [1α(OH)D 3 ], 1α-hydroxyvitamin D 2 [1α(OH)D 2 ] and 25-hydroxyvitamin D 3 [25(OH)D 3 ] were appraised for their vitamin D receptor (VDR) associated-potencies as cholesterol lowering agents in mice in vivo. These precursors are activated in vivo: 1α(OH)D 3 and 1α(OH)D 2 are transformed by liver CYP2R1 and CYP27A1 to active VDR ligands, 1α,25-dihydroxyvitamin D 3 [1,25(OH) 2 D 3 ] and 1α,25-dihydroxyvitamin D 2 [1,25(OH) 2 D 2 ] , respectively. 1α(OH)D 2 may also be activated by CYP24A1 to 1α,24-dihydroxyvitamin D 2 [1,24(OH) 2 D 2 ], another active VDR ligand. 25(OH)D 3 , the metabolite formed via CYP2R1 and or CYP27A1 in liver from vitamin D 3 , is activated by CYP27B1 in the kidney to 1,25(OH) 2 D 3 . In C57BL/6 mice fed the high fat/high cholesterol Western diet for 3 weeks, vitamin D analogs were administered every other day intraperitoneally during the last week of the diet. The rank order for cholesterol lowering, achieved via mouse liver small heterodimer partner (Shp) inhibition and increased cholesterol 7α-hydroxylase (Cyp7a1) expression, was: 1.75 nmol/kg 1α(OH)D 3  > 1248 nmol/kg 25(OH)D 3 (dose ratio of 0.0014) > > 1625 nmol/kg vitamin D 3 . Except for 1.21 nmol/kg 1α(OH)D 2 that failed to lower liver and plasma cholesterol contents, a significant negative correlation was observed between the liver concentration of 1,25(OH) 2 D 3 formed from the precursors and liver cholesterol levels. The composite results show that vitamin D analogs 1α(OH)D 3 and 25(OH)D 3 exhibit cholesterol lowering properties upon activation to 1,25(OH) 2 D 3 : 1α(OH)D 3 is rapidly activated by liver enzymes and 25(OH)D 3 is slowly activated by renal Cyp27b1 in mouse. Copyright © 2018 John Wiley & Sons, Ltd.

  9. 17 CFR 12.3 - Business address; hours.

    Science.gov (United States)

    2010-04-01

    ... REPARATIONS General Information and Preliminary Consideration of Pleadings § 12.3 Business address; hours. The... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Business address; hours. 12.3..., DC 20581. It is open each day, except Saturdays, Sundays, and legal public holidays, from 8:15 a.m...

  10. High-risk clinical target volume delineation in CT-guided cervical cancer brachytherapy - Impact of information from FIGO stage with or without systematic inclusion of 3D documentation of clinical gynecological examination

    Energy Technology Data Exchange (ETDEWEB)

    Hegazy, Neamat [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria); Dept. of Clinical Oncology, Medical Univ. of Alexandria, Alexandria (Egypt); Poetter Rickard; Kirisits, Christian [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria); Christian Doppler Lab. for Medical Radiation Research for Radiation Oncology, Medical Univ. Vienna (Austria); Berger, Daniel; Federico, Mario; Sturdza, Alina; Nesvacil, Nicole [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria)], e-mail: nicole.nesvacil@meduniwien.ac.at

    2013-10-15

    Purpose: The aim of the study was to improve computed tomography (CT)-based high-risk clinical target volume (HR CTV) delineation protocols for cervix cancer patients, in settings without any access to magnetic resonance imaging (MRI) at the time of brachytherapy. Therefore the value of a systematic integration of comprehensive three-dimensional (3D) documentation of repetitive gynecological examination for CT-based HR CTV delineation protocols, in addition to information from FIGO staging, was investigated. In addition to a comparison between reference MRI contours and two different CT-based contouring methods (using complementary information from FIGO staging with or without additional 3D clinical drawings), the use of standardized uterine heights was also investigated. Material and methods: Thirty-five cervix cancer patients with CT- and MR-images and 3D clinical drawings at time of diagnosis and brachytherapy were included. HR CTV{sub stage} was based on CT information and FIGO stage. HR CTV{sub stage} {sub +3Dclin} was contoured on CT using FIGO stage and 3D clinical drawing. Standardized HR CTV heights were: 1/1, 2/3 and 1/2 of uterine height. MRI-based HR CTV was delineated independently. Resulting widths, thicknesses, heights, and volumes of HR CTV{sub stage}, HR CTV{sub stage+3Dclin} and MRI-based HR CTV contours were compared. Results: The overall normalized volume ratios (mean{+-}SD of CT/MRI{sub ref} volume) of HR CTV{sub stage} and HR{sub stage+3Dclin} were 2.6 ({+-}0.6) and 2.1 ({+-}0.4) for 1/1 and 2.3 ({+-}0.5) and 1.8 ({+-}0.4), for 2/3, and 1.9 ({+-}0.5) and 1.5 ({+-}0.3), for 1/2 of uterine height. The mean normalized widths were 1.5{+-}0.2 and 1.2{+-}0.2 for HR CTV{sub stage} and HR CTV{sub stage+3Dclin}, respectively (p < 0.05). The mean normalized heights for HR CTV{sub stage} and HR CTV{sub stage+3Dclin} were both 1.7{+-}0.4 for 1/1 (p < 0.05.), 1.3{+-}0.3 for 2/3 (p < 0.05) and 1.1{+-}0.3 for 1/2 of uterine height. Conclusion: CT-based HR

  11. MERRA 3D IAU Tendency, Wind Components, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPUDT or tavg3_3d_udt_Cp data product is the MERRA Data Assimilation System 3-Dimensional eastward wind tendencies that is time averaged on pressure levels...

  12. MERRA 3D IAU Diagnostic, Moist Physics, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPMST or tavg3_3d_mst_Cp data product is the MERRA Data Assimilation System 3-Dimensional moist process diagnostic that is time averaged on pressure levels...

  13. MERRA 3D IAU Tendency, Specific Humidity, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPQDT or tavg3_3d_qdt_Cp data product is the MERRA Data Assimilation System 3-Dimensional moisture tendencies that is time averaged on pressure levels at a...

  14. MERRA 3D IAU Diagnostic, Cloud Properties, Time average 3-hourly (1.25x1.25L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3CPCLD or tavg3_3d_cld_Cp data product is the MERRA Data Assimilation System 3-Dimensional cloud diagnostic that is time averaged on pressure levels at a...

  15. Importance of apical membrane delivery of 1,25-dihydroxyvitamin D3 to vitamin D-responsive gene expression in the colon.

    Science.gov (United States)

    Koszewski, Nicholas J; Horst, Ronald L; Goff, Jesse P

    2012-10-01

    Synthetic conjugation of a glucuronide to 1,25-dihydroxyvitamin D3 (1,25D3) to produce β-25-monoglucuronide-1,25D3 (βGluc-1,25D3) renders the hormone biologically inactive and resistant to mammalian digestive enzymes. However, β-glucuronidase produced by bacteria in the lower intestinal tract can cleave off the glucuronide, releasing the active hormone. In mice given a single oral dose of 1,25D3, 24-hydroxylase (Cyp24a1) gene expression was strongly enhanced in the duodenum, but not in the colon, despite circulating concentrations of 1,25D3 that peaked at ∼3.0 nmol/l. In contrast, in mice treated with an equimolar dose of βGluc-1,25D3, Cyp24a1 gene expression increased 700-fold in the colon but was significantly weaker in the duodenum compared with mice treated with 1,25D3. Similar results were observed with another vitamin D-dependent gene. When administered subcutaneously, 1,25D3 weakly stimulated colon Cyp24a1 gene expression while βGluc-1,25D3 again resulted in strong enhancement. Surgical ligation to block passage of ingesta beyond the upper intestinal tract abolished upregulation of colon Cyp24a1 gene expression by orally and subcutaneously administered βGluc-1,25D3. Feeding βGluc-1,25D3 for 5 days revealed a linear, dose-dependent increase in colon Cyp24a1 gene expression but did not significantly increase plasma 1,25D3 or calcium concentrations. This study indicates that the colon is relatively insensitive to circulating concentrations of 1,25D3 and that the strongest gene enhancement occurs when the hormone reaches the colon via the lumen of the intestinal tract. These findings have broad implications for the use of vitamin D compounds in colon disorders and set the stage for future therapeutic studies utilizing βGluc-1,25D3 in their treatment.

  16. MERRA Chem 3D IAU Edge Pressure, Instantaneous 3-Hourly (eta coord, 2/3x1/2L73) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAI3NECHM or inst3_3d_chm_Ne data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layer Edges that is time averaged, 3D model...

  17. Forecasting Kp from solar wind data: input parameter study using 3-hour averages and 3-hour range values

    Science.gov (United States)

    Wintoft, Peter; Wik, Magnus; Matzka, Jürgen; Shprits, Yuri

    2017-11-01

    We have developed neural network models that predict Kp from upstream solar wind data. We study the importance of various input parameters, starting with the magnetic component Bz, particle density n, and velocity V and then adding total field B and the By component. As we also notice a seasonal and UT variation in average Kp we include functions of day-of-year and UT. Finally, as Kp is a global representation of the maximum range of geomagnetic variation over 3-hour UT intervals we conclude that sudden changes in the solar wind can have a big effect on Kp, even though it is a 3-hour value. Therefore, 3-hour solar wind averages will not always appropriately represent the solar wind condition, and we introduce 3-hour maxima and minima values to some degree address this problem. We find that introducing total field B and 3-hour maxima and minima, derived from 1-minute solar wind data, have a great influence on the performance. Due to the low number of samples for high Kp values there can be considerable variation in predicted Kp for different networks with similar validation errors. We address this issue by using an ensemble of networks from which we use the median predicted Kp. The models (ensemble of networks) provide prediction lead times in the range 20-90 min given by the time it takes a solar wind structure to travel from L1 to Earth. Two models are implemented that can be run with real time data: (1) IRF-Kp-2017-h3 uses the 3-hour averages of the solar wind data and (2) IRF-Kp-2017 uses in addition to the averages, also the minima and maxima values. The IRF-Kp-2017 model has RMS error of 0.55 and linear correlation of 0.92 based on an independent test set with final Kp covering 2 years using ACE Level 2 data. The IRF-Kp-2017-h3 model has RMSE = 0.63 and correlation = 0.89. We also explore the errors when tested on another two-year period with real-time ACE data which gives RMSE = 0.59 for IRF-Kp-2017 and RMSE = 0.73 for IRF-Kp-2017-h3. The errors as function

  18. iROLL: does 3-D radioguided occult lesion localization improve surgical management in early-stage breast cancer?

    Energy Technology Data Exchange (ETDEWEB)

    Bluemel, Christina; Kajdi, Georg W.; Schmid, Jan; Buck, Andreas K.; Herrmann, Ken [University Hospital of Wuerzburg, Department of Nuclear Medicine, Wuerzburg (Germany); Cramer, Andreas; Grossmann, Christoph; Grimminger, Hanns-Joerg [Missionsaerztliches Klinikum Wuerzburg, Department of Obstetrics and Gynecology, Wuerzburg (Germany); Malzahn, Uwe [University of Wuerzburg, Institute of Clinical Epidemiology and Biometry, Wuerzburg (Germany); Lamp, Nora [University of Wuerzburg, Institute of Pathology, Wuerzburg (Germany); Langen, Heinz-Jakob [Missionsaerztliches Klinikum Wuerzburg, Department of Radiology, Wuerzburg (Germany)

    2015-10-15

    To prospectively evaluate the feasibility of 3-D radioguided occult lesion localization (iROLL) and to compare iROLL with wire-guided localization (WGL) in patients with early-stage breast cancer undergoing breast-conserving surgery and sentinel lymph node biopsy (SLNB). WGL (standard procedure) and iROLL in combination with SLNB were performed in 31 women (mean age 65.1 ± 11.2 years) with early-stage breast cancer and clinically negative axillae. Patient comfort in respect of both methods was assessed using a ten point scale. SLNB and iROLL were guided by freehand SPECT (fhSPECT). The results of the novel 3-D image-based method were compared with those of WGL, ultrasound-based lesion localization, and histopathology. iROLL successfully detected the malignant primary and at least one sentinel lymph node in 97 % of patients. In a single patient (3 %), only iROLL, and not WGL, enabled lesion localization. The variability between fhSPECT and ultrasound-based depth localization of breast lesions was low (1.2 ± 1.4 mm). Clear margins were achieved in 81 % of the patients; however, precise prediction of clear histopathological surgical margins was not feasible using iROLL. Patients rated iROLL as less painful than WGL with a pain score 0.8 ± 1.2 points (p < 0.01) lower than the score for iROLL. iROLL is a well-tolerated and feasible technique for localizing early-stage breast cancer in the course of breast-conserving surgery, and is a suitable replacement for WGL. As a single image-based procedure for localization of breast lesions and sentinel nodes, iROLL may improve the entire surgical procedure. However, no advantages of the image-guided procedure were found with regard to prediction of complete tumour resection. (orig.)

  19. iROLL: does 3-D radioguided occult lesion localization improve surgical management in early-stage breast cancer?

    Science.gov (United States)

    Bluemel, Christina; Cramer, Andreas; Grossmann, Christoph; Kajdi, Georg W; Malzahn, Uwe; Lamp, Nora; Langen, Heinz-Jakob; Schmid, Jan; Buck, Andreas K; Grimminger, Hanns-Jörg; Herrmann, Ken

    2015-10-01

    To prospectively evaluate the feasibility of 3-D radioguided occult lesion localization (iROLL) and to compare iROLL with wire-guided localization (WGL) in patients with early-stage breast cancer undergoing breast-conserving surgery and sentinel lymph node biopsy (SLNB). WGL (standard procedure) and iROLL in combination with SLNB were performed in 31 women (mean age 65.1 ± 11.2 years) with early-stage breast cancer and clinically negative axillae. Patient comfort in respect of both methods was assessed using a ten point scale. SLNB and iROLL were guided by freehand SPECT (fhSPECT). The results of the novel 3-D image-based method were compared with those of WGL, ultrasound-based lesion localization, and histopathology. iROLL successfully detected the malignant primary and at least one sentinel lymph node in 97% of patients. In a single patient (3%), only iROLL, and not WGL, enabled lesion localization. The variability between fhSPECT and ultrasound-based depth localization of breast lesions was low (1.2 ± 1.4 mm). Clear margins were achieved in 81% of the patients; however, precise prediction of clear histopathological surgical margins was not feasible using iROLL. Patients rated iROLL as less painful than WGL with a pain score 0.8 ± 1.2 points (p localizing early-stage breast cancer in the course of breast-conserving surgery, and is a suitable replacement for WGL. As a single image-based procedure for localization of breast lesions and sentinel nodes, iROLL may improve the entire surgical procedure. However, no advantages of the image-guided procedure were found with regard to prediction of complete tumour resection.

  20. Comparison of post-contrast 3D-T1-MPRAGE, 3D-T1-SPACE and 3D-T2-FLAIR MR images in evaluation of meningeal abnormalities at 3-T MRI.

    Science.gov (United States)

    Jeevanandham, Balaji; Kalyanpur, Tejas; Gupta, Prashant; Cherian, Mathew

    2017-06-01

    This study was to assess the usefulness of newer three-dimensional (3D)-T 1 sampling perfection with application optimized contrast using different flip-angle evolutions (SPACE) and 3D-T 2 fluid-attenuated inversion recovery (FLAIR) sequences in evaluation of meningeal abnormalities. 78 patients who presented with high suspicion of meningeal abnormalities were evaluated using post-contrast 3D-T 2 -FLAIR, 3D-T 1 magnetization-prepared rapid gradient-echo (MPRAGE) and 3D-T 1 -SPACE sequences. The images were evaluated independently by two radiologists for cortical gyral, sulcal space, basal cisterns and dural enhancement. The diagnoses were confirmed by further investigations including histopathology. Post-contrast 3D-T 1 -SPACE and 3D-T 2 -FLAIR images yielded significantly more information than MPRAGE images (p evaluation of meningeal abnormalities and when used in combination have the maximum sensitivity for leptomeningeal abnormalities. The negative-predictive value is nearly 100%, where no leptomeningeal abnormality was detected on these sequences. Advances in knowledge: Post-contrast 3D-T 1 -SPACE and 3D-T 2 -FLAIR images are more useful than 3D-T 1 -MPRAGE images in evaluation of meningeal abnormalities.

  1. Pharmacokinetics of 1,25(OH)(2)D(3) and 1alpha(OH)D(3) in normal and uraemic men

    DEFF Research Database (Denmark)

    Brandi, Lisbet; Egfjord, Martin; Olgaard, Klaus

    2002-01-01

    ,25(OH)(2)D(3) (n=6) protocol. RESULTS: After oral administration of 1,25(OH)(2)D(3) the bioavailability of 1,25(OH)(2)D(3) was 70.6+/-5.8/72.2+/-4.8% in healthy volunteers/uraemic patients (n.s.). After i.v. administration the volume of distribution of 1,25(OH)(2)D(3) was similar, 0.49+/-0.14 vs 0...

  2. MERRA Chem 3D IAU, Precip Mass Flux, Time average 3-hourly (eta coord edges, 1.25X1L73) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3FECHM or tavg3_3d_chm_Fe data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layers edges that is time averaged, 3D model...

  3. (3+1)D Quasiparticle Anisotropic Hydrodynamics for Ultrarelativistic Heavy-Ion Collisions.

    Science.gov (United States)

    Alqahtani, Mubarak; Nopoush, Mohammad; Ryblewski, Radoslaw; Strickland, Michael

    2017-07-28

    We present the first comparisons of experimental data with phenomenological results from (3+1)D quasiparticle anisotropic hydrodynamics (aHydroQP). We compare particle spectra, average transverse momentum, and elliptic flow. The dynamical equations used for the hydrodynamic stage utilize aHydroQP, which naturally includes both shear and bulk viscous effects. The (3+1)D aHydroQP evolution obtained is self-consistently converted to hadrons using anisotropic Cooper-Frye freeze-out. Hadron production and decays are modeled using a customized version of therminator 2. In this first study, we utilized smooth Glauber-type initial conditions and a single effective freeze-out temperature T_{FO}=130  MeV with all hadronic species in full chemical equilibrium. With this rather simple setup, we find a very good description of many heavy-ion observables.

  4. Coal liquefaction in early stage of NEDOL process 1t/d PSU; 1t/d PSU ni okeru ekika shoki hanno ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, K.; Kawabata, M.; Mochizuki, M.; Imada, K. [Nippon Steel Corp., Tokyo (Japan); Nogami, Y.; Inokuchi, K. [Mitsui SRC Development Co. Ltd., Tokyo (Japan)

    1996-10-28

    To investigate the behavior of coal liquefaction reaction in early stage as a part of studies on the coal liquefaction characteristics using NEDOL process 1 t/d process supporting unit (PSU), coal slurry sample was taken from the outlet of slurry preheater located in the upflow of liquefaction reactors, and was tested. Tanito Harum coal was used for liquefaction. Preheater was operated under the condition of pressure of 170 kg/cm{sup 2}, gas flow rate of 64 Nm{sup 3}/hr, and at temperature up to 410{degree}C at the outlet, in response to the standard test condition. The slurry sample was discharged into a high temperature separator with temperature of 250{degree}C. Liquefaction was not proceeded at the outlet of preheater. Solid residue yielded around 80%, and liquid yielded around 15%. Gases, CO and CO2, and water yielded also small amount around 3%. The solid sample contained much IOM fraction (tetrahydrofuran-insoluble and ash), and the liquid contained much heavy oil fraction. Hydrogenation was not proceeded, and the hydrogen consumption was very low showing below one-tenth of that at the usual operation. Hydrogen sulfide gas was formed at early stage, which suggested that the change of iron sulfide catalyst occur at early stage of liquefaction. 1 ref., 5 figs., 2 tabs.

  5. A 3D reconstruction of pancreas development in the human embryos during embryonic period (Carnegie stages 15-23).

    Science.gov (United States)

    Radi, M; Gaubert, J; Cristol-Gaubert, R; Baecker, V; Travo, P; Prudhomme, M; Godlewski, G; Prat-Pradal, D

    2010-01-01

    The goal in this paper was to rebuild a three dimensional (3D) reconstruction of the dorsal and ventral pancreatic buds, in the human embryos, at Carnegie stages 15-23. The early development of the pancreas is studied by tissue observation and reconstruction by a computer-assisted method, using a light micrograph images from consecutive serial sagittal sections (diameter 7 microm) of ten human embryos ranging from Carnegie stages 15-23, CRL 7-27 mm, fixed, dehydrated and embedded in paraffin, were stained alternately with haematoxylin-eosin or Heindenhain'Azan. The images were digitalized by Canon Camera 350 EOS D. The serial views were aligned automatically by software, manual alignment was performed, the data were analysed following segmentation and threshold. The two buds were clearly identified at stage 15. In stage 16, both pancreatic buds were in final position, and begin to merge in stage 17. From stage 18 to the stage 23, surrounding connective tissue differentiated. In the stage 23, the morphology of the pancreas was definitive. The superior portion of the anterior face of the pancreas's head was arising from the dorsal bud. The rest of the head including the uncinate process emanated from the ventral bud. The 3D computer-assisted reconstruction of the human pancreas visualized the relationships between the two pancreatic buds. This explains the disposition and the modality of the components fusion. This embryologic development permits a better understanding of congenital abnormalities.

  6. Test Series 3: seismic-fragility tests of naturally-aged Class 1E C and D LCU-13 battery cells

    International Nuclear Information System (INIS)

    Bonzon, L.L.; Hente, D.B.; Kukreti, B.M.; Schendel, J.; Tulk, J.D.; Janis, W.J.; Black, D.A.; Paulsen, G.D.; Aucoin, B.D.

    1985-03-01

    This report, the third in a test series of an extensive seismic research program, covers the testing of 10-year old lead-calcium C and D LCU-13 cells from the North Anna Nuclear Power Station operated by the Virginia Electric and Power Company. The C and D cells were tested in two configurations using a triaxial shake table: single-cell tests, both rigidly and loosely mounted; and multicell (three-cell) tests, mounted in a typical battery rack. A total of seven electrically active cells was used in the two different cell configurations. None of the seven cells failed in the first stage tests during the actual seismic test up to the 1.5 g ZPAs imposed. Subsequent discharge capacity tests showed that while these cells suffered some loss of discharge capacity, all cells could deliver the accepted standard of 80% of their rated electrical capacity for 3 hours. When two of the same cells were exposed to the second stage, higher g-level tests, both cells again provided instantaneous uninterrupted power. Subsequent capacity tests showed both of these cells to have capacities well below the accepted standard of 80%. Four of the cells were disassembled for examination and metallurgical analyses. The examination showed that all plates and separators were in very good condition

  7. Endorectal 3D T2-weighted 1 mm-slice thickness MRI for prostate cancer staging at 1.5 Tesla: Should we reconsider the indirects signs of extracapsular extension according to the D’Amico tumor risk criteria?

    International Nuclear Information System (INIS)

    Cornud, F.; Rouanne, M.; Beuvon, F.; Eiss, D.; Flam, T.; Liberatore, M.; Zerbib, M.; Delongchamps, N.B.

    2012-01-01

    Purpose: To evaluate the accuracy of a 3D-endorectal 1 mm-thick slices MRI acquisition for local staging of low, intermediate and high D’Amico risk prostate cancer (PCa). Materials and methods: 178 consecutive patients underwent a multiparametric MRI protocol prior to radical prostatectomy (RP). T2W images were acquired with the 3D sampling perfection with application optimized contrasts using different flip angle evolutions (SPACE) sequence (5 mn acquisition time). Direct and indirect MRI signs of extracapsular extension (ECE) were evaluated to predict the pT stage. The likelihood of SVI (seminal vesicle invasion) was also assessed. Results: Histology showed ECE and SVI in 38 (21%) and 12 (7%) cases, respectively. MRI sensitivity and specificity to detect ECE were 55 and 96% if direct signs of ECE were used and 84 and 89% (p < 0.05), if both direct and indirect signs were combined. D’Amico criteria did not influence MRI performance. Sensitivity and specificity for SVI detection were 83% and 99%. Conclusions: 3D data sets acquired with the SPACE sequence provides a high accuracy for local staging of prostate cancer. The use of indirect signs of ECE may be recommended in low D’Amico risk tumors to optimise patient selection for active surveillance or focal therapy.

  8. D{sub s1}{sup *}(2860) and D{sub s3}{sup *}(2860): candidates for 1D charmed-strange mesons

    Energy Technology Data Exchange (ETDEWEB)

    Song, Qin-Tao [Chinese Academy of Sciences, Nuclear Theory Group, Institute of Modern Physics, Lanzhou (China); Lanzhou University and Institute of Modern Physics of CAS, Research Center for Hadron and CSR Physics, Lanzhou (China); University of Chinese Academy of Sciences, Beijing (China); Chen, Dian-Yong [Chinese Academy of Sciences, Nuclear Theory Group, Institute of Modern Physics, Lanzhou (China); Lanzhou University and Institute of Modern Physics of CAS, Research Center for Hadron and CSR Physics, Lanzhou (China); Liu, Xiang [Lanzhou University and Institute of Modern Physics of CAS, Research Center for Hadron and CSR Physics, Lanzhou (China); Lanzhou University, School of Physical Science and Technology, Lanzhou (China); Matsuki, Takayuki [Tokyo Kasei University, Tokyo (Japan); RIKEN, Theoretical Research Division, Nishina Center, Saitama (Japan)

    2015-01-01

    Newly observed two charmed-strange resonances, D{sub s1}{sup *}(2860) and D{sub s3}{sup *}(2860), are investigated by calculating their Okubo-Zweig-Iizuka-allowed strong decays, which shows that they are suitable candidates for the 1{sup 3}D{sub 1} and 1{sup 3}D{sub 3} states in the charmed-strange meson family. Our study also predicts other main decay modes of D{sub s1}{sup *}(2860) and D{sub s3}{sup *}(2860), which can be accessible at the future experiment. In addition, the decay behaviors of the spin partners of D{sub s1}{sup *}(2860) and D{sub s3}{sup *}(2860), i.e., 1D(2{sup -}) and 1D'(2{sup -}), are predicted in this work, which are still missing at present. The experimental search for the missing 1D(2{sup -}) and 1D'(2{sup -}) charmed-strange mesons is an intriguing and challenging task for further experiments. (orig.)

  9. Effect of a 1-hour single bout of moderate-intensity exercise on fat oxidation kinetics.

    Science.gov (United States)

    Chenevière, Xavier; Borrani, Fabio; Ebenegger, Vincent; Gojanovic, Boris; Malatesta, Davide

    2009-12-01

    The present study aimed to examine the effects of a prior 1-hour continuous exercise bout (CONT) at an intensity (Fat(max)) that elicits the maximal fat oxidation (MFO) on the fat oxidation kinetics during a subsequent submaximal incremental test (IncrC). Twenty moderately trained subjects (9 men and 11 women) performed a graded test on a treadmill (Incr), with 3-minute stages and 1-km.h(-1) increments. Fat oxidation was measured using indirect calorimetry and plotted as a function of exercise intensity. A mathematical model (SIN) including 3 independent variables (dilatation, symmetry, and translation) was used to characterize the shape of fat oxidation kinetics and to determine Fat(max) and MFO. On a second visit, the subjects performed CONT at Fat(max) followed by IncrC. After CONT performed at 57% +/- 3% (means +/- SE) maximal oxygen uptake (Vo(2max)), the respiratory exchange ratio during IncrC was lower at every stage compared with Incr (P rates from 35% to 70% Vo(2max) (P .05), whereas symmetry tended to be greater in IncrC (P = .096). This study showed that the prior 1-hour continuous moderate-intensity exercise bout increased Fat(max), MFO, and fat oxidation rates over a wide range of intensities during the postexercise incremental test. Moreover, the shape of the postexercise fat oxidation kinetics tended to have a rightward asymmetry.

  10. Synthesis of high specific activity [1-3H]-D-glucose

    International Nuclear Information System (INIS)

    Saljoughian, M.; Morimoto, Hiromi; Williams, P.G.; Lee, Hakno

    1991-01-01

    Specifically labeled [1- 3 H]-D-glucose has been used for metabolic and mechanistic studies in erythrocytes. In vitro metabolism of the a and b anomers of the tritiated glucose was readily traced by 3 H NMR spectroscopy. Initial studies used labeled glucose obtained by catalytic exchange labeling (at 4.5-9 Ci/mmole, or 15-30% tritiated at the C-1 position), and this necessitated sample glucose concentrations of 2-4 times physiological. The availability of glucose at maximum specific activity (28.7 Ci/mmole, 100% at the C-1 position) would allow the authors to observe metabolic behavior using 1 mM levels of glucose. Accordingly, they have devised a new route for the synthesis of C-1 tritiated glucose, involving the synthesis of 4,6-O-benzylidene-D-gluconolactone followed by reduction with supertritide. Preliminary work with commercial superdeuteride is complete, and chromatographic and NMR analyses are promising. The analogous tritium reactions are currently underway, and experimental results are presented for all stages of investigation. This strategy should be generally applicable to the labeling of many reducing sugars, with the substrates 2-deoxyglucose and maltotriose being of particular interest to their research

  11. On D=2 (1/3,1/3) supersymmetric theories 2

    International Nuclear Information System (INIS)

    Saidi, E.H.; Zerouaoui, J.; Sedra, M.B.

    1994-06-01

    Denoting by D=2 (1/3,1/3) superalgebra; the off critical symmetry of the Φ 5/7,5/7 perturbation of the C=6/7 conformal theory, we build a new superspace solution of the (1/3,1/3) - subalgebra generated by spin ±1/3 charge operators extending the usual (1/2,1/2) supersymmetry generated by spin ±1/2 charges. This solution is based on the use of two Grassmann variables instead of one parafermionic variable θ ±1/3 satisfying the cubic nilpotency condition (θ ±1/3 ) 3 =0. Known results on the C=6/7 tricritical Potts model are recovered as special features. A relation with N=2 Landau-Ginzburg models is also discussed. (author). 17 refs, 1 tab

  12. Step-by-step guide to building an inexpensive 3D printed motorized positioning stage for automated high-content screening microscopy.

    Science.gov (United States)

    Schneidereit, Dominik; Kraus, Larissa; Meier, Jochen C; Friedrich, Oliver; Gilbert, Daniel F

    2017-06-15

    High-content screening microscopy relies on automation infrastructure that is typically proprietary, non-customizable, costly and requires a high level of skill to use and maintain. The increasing availability of rapid prototyping technology makes it possible to quickly engineer alternatives to conventional automation infrastructure that are low-cost and user-friendly. Here, we describe a 3D printed inexpensive open source and scalable motorized positioning stage for automated high-content screening microscopy and provide detailed step-by-step instructions to re-building the device, including a comprehensive parts list, 3D design files in STEP (Standard for the Exchange of Product model data) and STL (Standard Tessellation Language) format, electronic circuits and wiring diagrams as well as software code. System assembly including 3D printing requires approx. 30h. The fully assembled device is light-weight (1.1kg), small (33×20×8cm) and extremely low-cost (approx. EUR 250). We describe positioning characteristics of the stage, including spatial resolution, accuracy and repeatability, compare imaging data generated with our device to data obtained using a commercially available microplate reader, demonstrate its suitability to high-content microscopy in 96-well high-throughput screening format and validate its applicability to automated functional Cl - - and Ca 2+ -imaging with recombinant HEK293 cells as a model system. A time-lapse video of the stage during operation and as part of a custom assembled screening robot can be found at https://vimeo.com/158813199. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

  13. 4D atlas of the mouse embryo for precise morphological staging.

    Science.gov (United States)

    Wong, Michael D; van Eede, Matthijs C; Spring, Shoshana; Jevtic, Stefan; Boughner, Julia C; Lerch, Jason P; Henkelman, R Mark

    2015-10-15

    After more than a century of research, the mouse remains the gold-standard model system, for it recapitulates human development and disease and is quickly and highly tractable to genetic manipulations. Fundamental to the power and success of using a mouse model is the ability to stage embryonic mouse development accurately. Past staging systems were limited by the technologies of the day, such that only surface features, visible with a light microscope, could be recognized and used to define stages. With the advent of high-throughput 3D imaging tools that capture embryo morphology in microscopic detail, we now present the first 4D atlas staging system for mouse embryonic development using optical projection tomography and image registration methods. By tracking 3D trajectories of every anatomical point in the mouse embryo from E11.5 to E14.0, we established the first 4D atlas compiled from ex vivo 3D mouse embryo reference images. The resulting 4D atlas comprises 51 interpolated 3D images in this gestational range, resulting in a temporal resolution of 72 min. From this 4D atlas, any mouse embryo image can be subsequently compared and staged at the global, voxel and/or structural level. Assigning an embryonic stage to each point in anatomy allows for unprecedented quantitative analysis of developmental asynchrony among different anatomical structures in the same mouse embryo. This comprehensive developmental data set offers developmental biologists a new, powerful staging system that can identify and compare differences in developmental timing in wild-type embryos and shows promise for localizing deviations in mutant development. © 2015. Published by The Company of Biologists Ltd.

  14. Role of 3D PET-FDG in the Management of Lymphomas. The Latin American Experience

    International Nuclear Information System (INIS)

    Guirao, M.A.; Garcia, A.; Binia, S.; Arribas, L.C.; Spigatin, F.

    2002-01-01

    Aim: To assess the role that 3D PET and FDG played in the management of patients referred to our institution (last two years) for either initial staging (IS), intra-treatment evaluation (IT), or post treatment (PT) evaluation of patients with Hodgkin (HL) or Non Hodgkin lymphomas (NHL). Material and Methods: Fifty-four studies were performed to 42 patients (15 HL; 27 NHL) for IS (9), IT (12) or PT (33). Most patients had previously performed conventional imaging procedures (CT, Gallium-SPECT, MRI) during staging or clinical follow up (median 18 months.) Biopsy was done when relevant. At least 6-hour fasting and glucose serum level ≤ 1.2 g/l was required before IV injection of 50 to 60 microCi /Kg of [18F]-Fluorodeoxiglucose (FDG.) After a 60 to 90-minute uptake period, a whole body PET scan was performed, 5-minute acquisition and 2-minute transmission per bed, 5 to 7 beds, with an average scanning time of 1 hour. Localized images (15 minutes) were done when deemed relevant. Results: FDG PET showed: 1) IS: 9 unsuspected sites in 4 patients, upstaging 2 of them (22.2%) -1 HL from II to III and 1 NHL from III to IV-. 2) IT: it helped to change the management previously decided by conventional imaging in 41.6% of patients (either stop or continue therapy.) 3) PT (Chemotherapy or EBRT): it helped to change the management of patients based on conventional imagining to a more aggressive (21.9%) or conservative one (20.6%.) Overall, either biopsy or follow up confirmed two false negative and 3 false positive PET studies. Conclusions: This ongoing clinical study of HL and NHL patients showed that 3D PET-FDG was as good as 2D PET in the management of Lymphoma. Besides being more accurate than conventional imaging for initial staging, it had a major impact in assessing treatment (IT or PT), and it helped to improve the management in more than 40% of patients. Besides, additional advantages were reported by patients and referrals when compared PET to Gallium-SPECT: mainly

  15. Quantitative studies of the brain specific antigens GFA, 14-3-2, synaptin C1, D1, D2, D3 and D5 in jimpy mouse

    DEFF Research Database (Denmark)

    Jacque, C M; Baumann, N A; Bock, E

    1976-01-01

    Seven antigens specific to the nervous tissue were measured in both Jimpy and control mice. The D5 and the GFA protein, both components of the glia, are strongly increased in the mutant while the neuronal components 14-3-2, synaptin C1, D1, D2 and D3 are unchanged....

  16. Evaluation of intraprostatic metabolism of 1,25-dihydroxyvitamin D(3) (calcitriol) using a microdialysis technique.

    Science.gov (United States)

    Konety, Badrinath R; Somogyi, George; Atan, Ali; Muindi, Josephia; Chancellor, Michael B; Getzenberg, Robert H

    2002-06-01

    1,25-dihydroxyvitamin D(3) (calcitriol) inhibits prostate cancer growth in vitro and in vivo. We used a prostate microdialysis technique to better understand the intraprostatic pharmacokinetics of calcitriol, which in turn would facilitate planning for systemic calcitriol therapy in patients with prostate cancer. Male Sprague-Dawley rats were treated with 5 microg of calcitriol intravenously. Animals were either intact (group 1, n = 6) or castrated (group 2, n = 3). Prostate microdialysis was performed by perfusing Krebs solution through a 5-mm linear probe. Effluents were collected hourly from 0 to 20 hours or until death. Serum was collected at baseline and at the end of the experiment. Serum was also obtained from untreated rats at 0, 1, 2, 3, 4, 6, 8, 12, and 24 hours after intraperitoneal injection of calcitriol. Calcitriol levels were measured by radioimmunoassay. The average baseline intraprostatic level of calcitriol in prostate dialysate in intact rats was 21.1 pg/mL (+/-7.5); it was 88 pg/mL (+/-98.4) after calcitriol administration. In castrated animals, the values were 16.6 pg/mL (+/-5.3) and 25.3 pg/mL (+/-10.7). Two peaks in intraprostatic calcitriol levels were observed after intravenous administration: at less than 6 hours after injection and at more than 13 hours after injection. The mean total calcitriol exposure (area under the concentration versus time curve) in the prostate was 297.6 (+/-159) pg/hr/mL (intact) and 272.7 (+/-123.6) pg/hr/mL (castrated). The baseline serum levels were 0.1 to 1 ng/mL and reached a peak of more than 100 ng/mL within 1 hour of intraperitoneal injection. This technique permits real-time measurement of intraprostatic pharmacokinetics of calcitriol. The ratio of the intraprostatic area under the concentration versus time curve to the serum area under the concentration versus time curve of calcitriol was less than 1:100. Hence, within 24 hours of calcitriol administration, only a fraction (less than 1%) of the serum

  17. Preliminary comparison of the registration effect of 4D-CBCT and 3D-CBCT in image-guided radiotherapy of Stage IA non–small-cell lung cancer

    OpenAIRE

    Tan, Zhibo; Liu, Chuanyao; Zhou, Ying; Shen, Weixi

    2017-01-01

    Abstract In this study, we compared the registration effectiveness of 4D cone-beam computed tomography (CBCT) and 3D-CBCT for image-guided radiotherapy in 20 Stage IA non–small-cell lung cancer (NSCLC) patients. Patients underwent 4D-CBCT and 3D-CBCT immediately before radiotherapy, and the X-ray Volume Imaging software system was used for image registration. We performed automatic bone registration and soft tissue registration between 4D-CBCT or 3D-CBCT and 4D-CT images; the regions of inter...

  18. Measurement of the spin-forbidden decay rate (3s3d)1D2¿(3s3p)3 P2,1 in 24Mg

    DEFF Research Database (Denmark)

    Therkildsen, K. T.; Jensen, Brian Bak; Ryder, C. P.

    2009-01-01

    We have measured the spin-forbidden decay rate from (3s3d)D12¿(3s3p)P32,1 in M24g atoms trapped in a magneto-optical trap. The total decay rate, summing up both exit channels (3s3p)P31 and (3s3p)P32 , yields 196±10s-1 in excellent agreement with resent relativistic many-body calculations of Porse...

  19. Mechanical design of a precision linear flexural stage for 3D x-ray diffraction microscope at the Advanced Photon Source

    Science.gov (United States)

    Shu, D.; Liu, W.; Kearney, S.; Anton, J.; Tischler, J. Z.

    2015-09-01

    The 3-D X-ray diffraction microscope is a new nondestructive tool for the three-dimensional characterization of mesoscopic materials structure. A flexural-pivot-based precision linear stage has been designed to perform a wire scan as a differential aperture for the 3-D diffraction microscope at the Advanced Photon Source, Argonne National Laboratory. The mechanical design and finite element analyses of the flexural stage, as well as its initial mechanical test results with laser interferometer are described in this paper.

  20. An electron spin resonance study on the gamma-irradiation of urea, urea- d4, 1-3-dimethylurea, 1-3-diethylurea and 1,1',3,3'-tetramthylurea

    International Nuclear Information System (INIS)

    Kang, Y.S.; McManus, H.J.D.; Kevan, L.

    1994-01-01

    Urea, urea-d 4 , 1,3-dimethylurea, 1,3-diethylurea powder and 1,1',3,3'-tetramethylurea, and their solutions in D 2 O were γ-irradiated with 0.0882 kGy both at room temperature and at 77 K. The product radicals were identified with X-band electron spin resonance, based on the g-factor and hyperfine coupling constants. The radicals formed from urea and urea-d 4 were identified as nitrogen-centered and resulted from N-H bond dissociation. The radicals produced from 1,3-dimethylurea, 1,3-diethylurea and 1,1',3,3'-tetramethylurea were identified as carbon-centered and resulted from C-H bond cleavage. The electron spin resonance signals of 1,3-dimethylurea, 1,3-diethylurea and 1,1',3,3'-tetramethylurea are similar in both the powder and D 2 O solution. The radicals observed from 1,3-dimethylurea, 1,3-diethylurea and 1,1',3,3'-tetramethylurea were identified as . NH-CH 2 , . NH-CHCH 3 and . (CH 3 )(CH 2 ), respectively. (author)

  1. Case study: Beauty and the Beast 3D: benefits of 3D viewing for 2D to 3D conversion

    Science.gov (United States)

    Handy Turner, Tara

    2010-02-01

    From the earliest stages of the Beauty and the Beast 3D conversion project, the advantages of accurate desk-side 3D viewing was evident. While designing and testing the 2D to 3D conversion process, the engineering team at Walt Disney Animation Studios proposed a 3D viewing configuration that not only allowed artists to "compose" stereoscopic 3D but also improved efficiency by allowing artists to instantly detect which image features were essential to the stereoscopic appeal of a shot and which features had minimal or even negative impact. At a time when few commercial 3D monitors were available and few software packages provided 3D desk-side output, the team designed their own prototype devices and collaborated with vendors to create a "3D composing" workstation. This paper outlines the display technologies explored, final choices made for Beauty and the Beast 3D, wish-lists for future development and a few rules of thumb for composing compelling 2D to 3D conversions.

  2. Studies on absorption, distribution, excretion and metabolism of 3H-1α-hydroxycholecalciferol in vitamin D deficient rats

    International Nuclear Information System (INIS)

    Tohira, Yasuo; Hinohara, Yoshikazu; Kamiyama, Hiroshi; Ogawa, Machiko; Nakano, Hideki

    1978-01-01

    The absorption, distribution, excretion and metabolism of 2- 3 H-1α-OH-D 3 (4.2 Ci/mmol) were studied in vitamin D deficient rats in comparison with the normal rats after oral or intravenous dosing. (1) Maximum blood level of administered radioactivity was observed at 8 hours after oral administration with apparent half life of 3.8 days. This blood level was higher than that in normal rat. (2) As in the normal rat, administered radioactivity was distributed relatively high in the liver, while any other specific distribution or accumulation was not observed in the another tissues, which was consistent to the finding in the normal rat. The tissue levels of the radioactivity were higher than these in the normal rat. (3) Urinary excretion of administered radioactivity was significantly higher, fecal and biliary excretion was significantly lower than that in the normal rat after intravenous dosing. (4) Relative percentage of 3 H-1α, 25-(OH) 2 -D 3 content to 3 H-1α-OH-D 3 content in tissues and blood was higher than that in the normal one. Above results suggest that in the vitamin D deficient state, the tissue accumulation of 1α-OH-D 3 was significantly augmented than in the normal rat, thus resulting increased bioavailability of its active metabolite, 1α, 25-(OH) 2 -D 3 . (author)

  3. Simulation of a 3D unsteady flow in an axial turbine stage

    Directory of Open Access Journals (Sweden)

    Straka Petr

    2012-04-01

    Full Text Available The contribution deals with a numerical simulation of an unsteady flow in an axial turbine stage. The solution is performed using an in-house numerical code developed in the Aeronautical and Test Institute, Plc. in Prague. The numerical code is based on a finite volume discretization of governing equations (Favre averaged Navier-Stokes equations and a two-equations turbulence model. The temporal integration is based on the implicit second-order backward Euler formula, which is realized through the iteration process in dual time. The proposed numerical method is used for solution of the 3D, unsteady, viscous turbulent flow of a perfect gas in the axial turbine stage. The flow path consists of an input nozzle, stator blade-wheel, rotor blade-wheel, a shroud-seal gap and a diffuser. Attention is paid to the influence of a secondary flow structures, such as generated vortices and flow in shroud-seal gap.

  4. A 0.1-1.4 GHz inductorless low-noise amplifier with 13 dBm IIP3 and 24 dBm IIP2 in 180 nm CMOS

    Science.gov (United States)

    Guo, Benqing; Chen, Jun; Chen, Hongpeng; Wang, Xuebing

    2018-01-01

    An inductorless noise-canceling CMOS low-noise amplifier (LNA) with wideband linearization technique is proposed. The complementary configuration by stacked NMOS/PMOS is employed to compensate second-order nonlinearity of the circuit. The third-order distortion of the auxiliary stage is also mitigated by that of the weak inversion transistors in the main path. The bias and scaling size combined by digital control words are further tuned to obtain enhanced linearity over the desired band. Implemented in a 0.18 μm CMOS process, simulated results show that the proposed LNA provides a voltage gain of 16.1 dB and a NF of 2.8-3.4 dB from 0.1 GHz to 1.4 GHz. The IIP3 and IIP2 of 13-18.9 and 24-40 dBm are obtained, respectively. The circuit core consumes 19 mW from a 1.8 V supply.

  5. Improvement in depression scores after 1 hour of light therapy treatment in patients with seasonal affective disorder.

    Science.gov (United States)

    Reeves, Gloria M; Nijjar, Gagan Virk; Langenberg, Patricia; Johnson, Mary A; Khabazghazvini, Baharak; Sleemi, Aamar; Vaswani, Dipika; Lapidus, Manana; Manalai, Partam; Tariq, Muhammad; Acharya, Monika; Cabassa, Johanna; Snitker, Soren; Postolache, Teodor T

    2012-01-01

    The purpose of this study was to investigate possible rapid effects of light therapy on depressed mood in patients with seasonal affective disorder. Participants received 1 hour of bright light therapy and 1 hour of placebo dim red light in a randomized order crossover design. Depressed mood was measured at baseline and after each hour of light treatment using two self-report depression scales (Profile of Mood States-Depression-Dejection [POMS-D] subscale and the Beck Depression Inventory II [BDI-II]). When light effects were grouped for the two sessions, there was significantly greater reduction in self-report depression scores by -1.3 (p = 0.02) on the BDI-II and -1.2 (p = 0.02) on the POMS-D. A significant but modest improvement was detected after a single active light session. This is the first study, to our knowledge, to document an immediate improvement with light treatment using a placebo-controlled design with a clinical sample of depressed individuals.

  6. One-Hour Postload Hyperglycemia Confers Higher Risk of Hepatic Steatosis to HbA1c-Defined Prediabetic Subjects.

    Science.gov (United States)

    Fiorentino, Teresa Vanessa; Andreozzi, Francesco; Mannino, Gaia Chiara; Pedace, Elisabetta; Perticone, Maria; Sciacqua, Angela; Perticone, Francesco; Sesti, Giorgio

    2016-11-01

    Individuals with glycated hemoglobin (HbA1c)-defined prediabetes (HbA1c value of 5.7-6.4%) and 1-hour plasma glucose ≥155 mg/dL during an oral glucose tolerance test have an increased risk of developing type 2 diabetes. To evaluate the degree to which HbA1c-defined prediabetes and 1-hour postload glucose ≥155 mg/dL individually and jointly associate with hepatic steatosis and related biomarkers. A cross-sectional analysis was performed on 1108 White individuals. Ambulatory care. Anthropometric and metabolic characteristics including hepatic steatosis assessed by ultrasonography. Compared with the normal group (HbA1c prediabetic and diabetic individuals exhibit higher values of fasting, 1-hour, and 2-hour postload glucose; fasting and 2-hour postload insulin; triglycerides; uric acid; homeostasis model of assessment for insulin resistance; liver insulin resistance index; liver enzymes; and inflammatory biomarkers; and lower levels of high-density lipoprotein cholesterol and IGF-1. Prediabetic and diabetic subjects have increased risk of hepatic steatosis (1.5- and 2.46-fold, respectively). Stratifying participants according to HbA1c and 1-hour postload glucose, we found that individuals with HbA1c-defined prediabetes and 1-hour postload glucose ≥155 mg/dL have significantly higher risk of hepatic steatosis as compared with individuals with HbA1c-defined prediabetes but 1-hour postload glucose prediabetes and 1-hour postload glucose ≥155 mg/dL exhibit higher values of liver enzymes; fasting, 1-hour, and 2-hour postload glucose; insulin; triglycerides; uric acid; and inflammatory biomarkers; and lower levels of high-density lipoprotein and IGF-1. These data suggest that a value of 1-hour postload glucose ≥155 mg/dL may be helpful to identify a subset of individuals within HbA1c-defined glycemic categories at higher risk of hepatic steatosis.

  7. FUN3D Manual: 13.1

    Science.gov (United States)

    Biedron, Robert T.; Carlson, Jan-Renee; Derlaga, Joseph M.; Gnoffo, Peter A.; Hammond, Dana P.; Jones, William T.; Kleb, Bil; Lee-Rausch, Elizabeth M.; Nielsen, Eric J.; Park, Michael A.; hide

    2017-01-01

    This manual describes the installation and execution of FUN3D version 13.1, including optional dependent packages. FUN3D is a suite of computational fluid dynamics simulation and design tools that uses mixed-element unstructured grids in a large number of formats, including structured multiblock and overset grid systems. A discretely-exact adjoint solver enables efficient gradient-based design and grid adaptation to reduce estimated discretization error. FUN3D is available with and without a reacting, real-gas capability. This generic gas option is available only for those persons that qualify for its beta release status.

  8. D{sub s1}{sup ∗}(2860) and D{sub s3}{sup ∗}(2860): candidates for 1D charmed-strange mesons

    Energy Technology Data Exchange (ETDEWEB)

    Song, Qin-Tao [Nuclear Theory Group, Institute of Modern Physics, Chinese Academy of Sciences, 730000, Lanzhou (China); Research Center for Hadron and CSR Physics, Lanzhou University & Institute of Modern Physics of CAS, 730000, Lanzhou (China); University of Chinese Academy of Sciences, 100049, Beijing (China); Chen, Dian-Yong, E-mail: chendy@impcas.ac.cn [Nuclear Theory Group, Institute of Modern Physics, Chinese Academy of Sciences, 730000, Lanzhou (China); Research Center for Hadron and CSR Physics, Lanzhou University & Institute of Modern Physics of CAS, 730000, Lanzhou (China); Liu, Xiang, E-mail: xiangliu@lzu.edu.cn [Research Center for Hadron and CSR Physics, Lanzhou University & Institute of Modern Physics of CAS, 730000, Lanzhou (China); School of Physical Science and Technology, Lanzhou University, 730000, Lanzhou (China); Matsuki, Takayuki, E-mail: matsuki@tokyo-kasei.ac.jp [Tokyo Kasei University, 1-18-1 Kaga, Itabashi, 173-8602, Tokyo (Japan); Theoretical Research Division, Nishina Center, RIKEN, 351-0198, Saitama (Japan)

    2015-01-27

    Newly observed two charmed-strange resonances, D{sub s1}{sup ∗}(2860) and D{sub s3}{sup ∗}(2860), are investigated by calculating their Okubo–Zweig–Iizuka-allowed strong decays, which shows that they are suitable candidates for the 1{sup 3}D{sub 1} and 1{sup 3}D{sub 3} states in the charmed-strange meson family. Our study also predicts other main decay modes of D{sub s1}{sup ∗}(2860) and D{sub s3}{sup ∗}(2860), which can be accessible at the future experiment. In addition, the decay behaviors of the spin partners of D{sub s1}{sup ∗}(2860) and D{sub s3}{sup ∗}(2860), i.e., 1D(2{sup -}) and 1D{sup ′}(2{sup -}), are predicted in this work, which are still missing at present. The experimental search for the missing 1D(2{sup -}) and 1D{sup ′}(2{sup -}) charmed-strange mesons is an intriguing and challenging task for further experiments.

  9. Using one hybrid 3D-1D-3D approach for the conceptual design of WCCB blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Kecheng; Zhang, Xiaokang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Li, Jia [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2017-01-15

    Highlights: • The Hybrid 3D-1D-3D approach is used for radial building design of WCCB. • Nuclear heat obtained by this method agrees well with 3D neutronics results. • The final results of temperature and TBR satisfy with the requirements. • All the results show that this approach is high efficiency and high reliability. - Abstract: A hybrid 3D-1D-3D approach is proposed for the conceptual design of a blanket. Firstly, the neutron wall loading (NWL) of each blanket module is obtained through a neutronics calculation employing a 3D model, which contains the geometry outline of in-vacuum vessel components and the exact neutron source distribution. Secondly, a 1D cylindrical model with the blanket module containing a detailed radial building is adopted for the neutronics analysis, with the aim of calculating the tritium breeding ratio (TBR) and nuclear heating. Being normalized to the NWL, the nuclear heating is transferred to a 2D model for thermal-hydraulics analysis using the FLUENT code. Through a series analysis of nuclear-thermal iterations that considers the tritium breeding ratio (TBR) and thermal performance as optimization objectives, the optimized radial building of each module surrounding plasma can be obtained. Thirdly, the 3D structural design of each module is established by adding side walls, cover plates, stiffening plates, and other components based on the radial building. The 3D neutronics and thermal-hydraulics using the detailed blanket modules are re-analyzed. This approach has been successfully applied to the design of a water-cooled ceramic breeder blanket for the Chinese Fusion Engineering Test Reactor (CFETR). The radial building of each blanket module surrounding plasma is optimized. The global tritium breeding ratio (TBR) calculated by the 3D neutronics analysis is 1.21, and the temperature of all materials in the 3D blanket structure is below the upper limits. As indicated by the comparison of the 1D and 3D neutronics and thermal

  10. LandSIM3D: modellazione in real time 3D di dati geografici

    Directory of Open Access Journals (Sweden)

    Lambo Srl Lambo Srl

    2009-03-01

    Full Text Available LandSIM3D: realtime 3D modelling of geographic data LandSIM3D allows to model in 3D an existing landscape in a few hours only and geo-referenced offering great landscape analysis and understanding tools. 3D projects can then be inserted into the existing landscape with ease and precision. The project alternatives and impact can then be visualized and studied into their immediate environmental. The complex evolution of the landscape in the future can also be simulated and the landscape model can be manipulated interactively and better shared with colleagues. For that reason, LandSIM3D is different from traditional 3D imagery solutions, normally reserved for computer graphics experts. For more information about LandSIM3D, go to www.landsim3d.com.

  11. 1-Hour OGTT Plasma Glucose as a Marker of Progressive Deterioration of Insulin Secretion and Action in Pregnant Women

    Directory of Open Access Journals (Sweden)

    Alessandra Ghio

    2012-01-01

    Full Text Available Considering old GDM diagnostic criteria, alterations in insulin secretion and action are present in women with GDM as well as in women with one abnormal value (OAV during OGTT. Our aim is to assess if changes in insulin action and secretion during pregnancy are related to 1-hour plasma glucose concentration during OGTT. We evaluated 3 h/100 g OGTT in 4,053 pregnant women, dividing our population on the basis of 20 mg/dL increment of plasma glucose concentration at 1 h OGTT generating 5 groups (<120 mg/dL, =661; 120–139 mg/dL, =710; 140–159 mg/dL, =912; 160–179 mg/dL, =885; and ≥180 mg/dL, =996. We calculated incremental area under glucose (AUCgluc and insulin curves (AUCins, indexes of insulin secretion (HOMA-B, and insulin sensitivity (HOMA-R, AUCins/AUCgluc. AUCgluc and AUCins progressively increased according to 1-hour plasma glucose concentrations (both <0.0001 for trend. HOMA-B progressively declined (<0.001, and HOMA-R progressively increased across the five groups. AUCins/AUCgluc decreased in a linear manner across the 5 groups (<0.001. Analysing the groups with 1-hour value <180 mg/dL, defects in insulin secretion (HOMA-B: −29.7% and sensitivity (HOMA-R: +15% indexes were still apparent (all <0.001. Progressive increase in 1-hour OGTT is associated with deterioration of glucose tolerance and alterations in indexes of insulin action and secretion.

  12. 3D model-based documentation with the Tumor Therapy Manager (TTM) improves TNM staging of head and neck tumor patients.

    Science.gov (United States)

    Pankau, Thomas; Wichmann, Gunnar; Neumuth, Thomas; Preim, Bernhard; Dietz, Andreas; Stumpp, Patrick; Boehm, Andreas

    2015-10-01

    Many treatment approaches are available for head and neck cancer (HNC), leading to challenges for a multidisciplinary medical team in matching each patient with an appropriate regimen. In this effort, primary diagnostics and its reliable documentation are indispensable. A three-dimensional (3D) documentation system was developed and tested to determine its influence on interpretation of these data, especially for TNM classification. A total of 42 HNC patient data sets were available, including primary diagnostics such as panendoscopy, performed and evaluated by an experienced head and neck surgeon. In addition to the conventional panendoscopy form and report, a 3D representation was generated with the "Tumor Therapy Manager" (TTM) software. These cases were randomly re-evaluated by 11 experienced otolaryngologists from five hospitals, half with and half without the TTM data. The accuracy of tumor staging was assessed by pre-post comparison of the TNM classification. TNM staging showed no significant differences in tumor classification (T) with and without 3D from TTM. However, there was a significant decrease in standard deviation from 0.86 to 0.63 via TTM ([Formula: see text]). In nodal staging without TTM, the lymph nodes (N) were significantly underestimated with [Formula: see text] classes compared with [Formula: see text] with TTM ([Formula: see text]). Likewise, the standard deviation was reduced from 0.79 to 0.69 ([Formula: see text]). There was no influence of TTM results on the evaluation of distant metastases (M). TNM staging was more reproducible and nodal staging more accurate when 3D documentation of HNC primary data was available to experienced otolaryngologists. The more precise assessment of the tumor classification with TTM should provide improved decision-making concerning therapy, especially within the interdisciplinary tumor board.

  13. Baseline characteristics of patients with chronic kidney disease stage 3 and stage 4 in spain: the MERENA observational cohort study

    Directory of Open Access Journals (Sweden)

    Montes Rafael

    2011-10-01

    Full Text Available Abstract Background To obtain information on cardiovascular morbidity, hypertension control, anemia and mineral metabolism based on the analysis of the baseline characteristics of a large cohort of Spanish patients enrolled in an ongoing prospective, observational, multicenter study of patients with stages 3 and 4 chronic kidney diseases (CKD. Methods Multicenter study from Spanish government hospital-based Nephrology outpatient clinics involving 1129 patients with CKD stages 3 (n = 434 and 4 (n = 695 defined by GFR calculated by the MDRD formula. Additional analysis was performed with GFR calculated using the CKD-EPI and Cockcroft-Gault formula. Results In the cohort as a whole, median age 70.9 years, morbidity from all cardiovascular disease (CVD was very high (39.1%. In CKD stage 4, CVD prevalence was higher than in stage 3 (42.2 vs 35.6% p 300 mg/day was present in more than 60% of patients and there was no significant differences between stages 3 and 4 CKD (1.2 ± 1.8 and 1.3 ± 1.8 g/day, respectively. A majority of the patients had hemoglobin levels greater than 11 g/dL (91.1 and 85.5% in stages 3 and 4 CKD respectively p Conclusion This study provides an overview of key clinical parameters in patients with CKD Stages 3 and 4 where delivery or care was largely by nephrologists working in a network of hospital-based clinics of the Spanish National Healthcare System.

  14. Acquired radioresistance of cancer and the AKT/GSK3β/cyclin D1 overexpression cycle

    International Nuclear Information System (INIS)

    Shimura, Tsutomu

    2011-01-01

    Fractionated radiotherapy (RT) is widely used in cancer therapy for its advantages in the preservation of normal tissues. However, repopulation of surviving tumor cells during fractionated RT limits the efficacy of RT. In fact, repopulating tumors often acquire radioresistance and this is the major cause of failure of RT. We have recently demonstrated that human tumor cells acquire radioresistance when exposed to fractionated radiation (FR) of X-rays every 12 hours for 1 month. The acquired radioresistance was associated with overexpression of cyclin D1, a result of a series of molecular changes; constitutive activation of DNA-PK and AKT with concomitant down-regulation of glycogen synthase kinase-3β (GSK3β) which results in suppression of cyclin D1 proteolysis. Aberrant cyclin D1 overexpression in S-phase induced DNA double strand breaks which activated DNA-PK and established the vicious cycle of cycling D1 overexpression. This overexpression of cyclin D1 is responsible for the radioresistance phenotype of long-term FR cells, since this phenotype was completely abrogated by treatment of FR cells by the AKT/PKB signaling inhibitor (API-2), an AKT inhibitor or by a Cdk4 inhibitor. Thus, targeting the AKT/GSK3β/cyclin D1/Cdk4 pathway can be an efficient modality to suppress acquired radioresistance of tumor cells. In this article, I overview the newly discovered molecular mechanisms underlying acquired radioresistance of tumor cells induced by FR, and propose a strategy for eradication of tumors using fractionated RT by overcoming tumor radioresistance. (author)

  15. Conformational analysis of vitamin D 3 derivatives by molecular mechanics . Part II. 1α,25-dihydroxyvitamin D 3 and analogues

    Science.gov (United States)

    Mosquera, Ricardo A.; Rios, Miguel A.; Tovar, Clara A.; Maestro, Miguel

    1989-10-01

    The conformational analysis of vitamin D 3 derivatives, including the biologically active form 1α,25-dihydroxyvitamin D 3 (III) and several synthetic analogues: b-deoxy-1α,25-dihydroxyvitamin D 3 (IV), 3-deoxy-3α-methyl-1α,25-dihydroxyvitamin D 3 (V), 3-deoxy-3β-methyl-1α,25-dihydroxyvitamin D 3 (VI), and 3-deoxy-3,3-dimethyl-1α,25-dihydroxyvitamin D 3 (VII), has been carried out employing Allinger's molecular mechanics method. The results obtained for conformational equilibrium populations are found to be in good agreement with those provided by NMR studies. Comparison of the active form of vitamin D 3 (1α,25-dihydroxyvitamin D 3) with the other species reveals no important geometrical differences.

  16. 17 CFR 240.15c3-1d - Satisfactory Subordination Agreements (Appendix D to 17 CFR 240.15c3-1).

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Satisfactory Subordination...-Counter Markets § 240.15c3-1d Satisfactory Subordination Agreements (Appendix D to 17 CFR 240.15c3-1). (a) Introduction. (1) This Appendix sets forth minimum and non-exclusive requirements for satisfactory...

  17. New coordination polymers from 1D chain, 2D layer to 3D framework constructed from 1,2-phenylenediacetic acid and 1,3-bis(4-pyridyl)propane flexible ligands

    International Nuclear Information System (INIS)

    Xin Lingyun; Liu Guangzhen; Wang Liya

    2011-01-01

    The hydrothermal reactions of Cd, Zn, or Cu(II) acetate salts with H 2 PHDA and BPP flexible ligands afford three new coordination polymers, including [Cd(PHDA)(BPP)(H 2 O)] n (1), [Zn(PHDA)(BPP)] n (2), and [Cu 2 (PHDA) 2 (BPP)] n (3) (H 2 PHDA=1,2-phenylenediacetic acid, BPP=1,3-bis(4-pyridyl)propane). The single-crystal X-ray diffractions reveal that all three complexes feature various metal carboxylate subunits extended further by the BPP ligands to form a diverse range of structures, displaying a remarked structural sensitivity to metal(II) cation. Complex 1 containing PHDA-bridged binuclear cadmium generates 1D double-stranded chain, complex 2 results in 2D→2D interpenetrated (4,4) grids, and complex 3 displays a 3D self-penetrated framework with 4 8 6 6 8 rob topology. In addition, fluorescent analyses show that both 1 and 2 exhibit intense blue-violet photoluminescence in the solid state. - Graphical Abstract: We show diverse supramolecular frameworks based on the same ligands (PHDA and BPP) and different metal acetate salts including 1D double-stranded chain, 2D → 2D twofold interpenetrated layer, and 3D self-penetration networks. Highlights: → Three metal(II = 2 /* ROMAN ) coordination polymers were synthesized using H 2 PHDA and BPP. → The diversity of structures show a remarked sensitivity to metal(II) center. → Complexes show the enhancement of fluorescence compared to that of free ligand.

  18. A one-piece 3D printed flexure translation stage for open-source microscopy

    Science.gov (United States)

    Sharkey, James P.; Foo, Darryl C. W.; Kabla, Alexandre; Baumberg, Jeremy J.; Bowman, Richard W.

    2016-02-01

    Open source hardware has the potential to revolutionise the way we build scientific instruments; with the advent of readily available 3D printers, mechanical designs can now be shared, improved, and replicated faster and more easily than ever before. However, printed parts are typically plastic and often perform poorly compared to traditionally machined mechanisms. We have overcome many of the limitations of 3D printed mechanisms by exploiting the compliance of the plastic to produce a monolithic 3D printed flexure translation stage, capable of sub-micron-scale motion over a range of 8 × 8 × 4 mm. This requires minimal post-print clean-up and can be automated with readily available stepper motors. The resulting plastic composite structure is very stiff and exhibits remarkably low drift, moving less than 20 μm over the course of a week, without temperature stabilisation. This enables us to construct a miniature microscope with excellent mechanical stability, perfect for time-lapse measurements in situ in an incubator or fume hood. The ease of manufacture lends itself to use in containment facilities where disposability is advantageous and to experiments requiring many microscopes in parallel. High performance mechanisms based on printed flexures need not be limited to microscopy, and we anticipate their use in other devices both within the laboratory and beyond.

  19. Ds1*(2860) and Ds3*(2860): candidates for 1D charmed-strange mesons

    International Nuclear Information System (INIS)

    Song, Qin-Tao; Chen, Dian-Yong; Liu, Xiang; Matsuki, Takayuki

    2015-01-01

    Newly observed two charmed-strange resonances, D s1 * (2860) and D s3 * (2860), are investigated by calculating their Okubo-Zweig-Iizuka-allowed strong decays, which shows that they are suitable candidates for the 1 3 D 1 and 1 3 D 3 states in the charmed-strange meson family. Our study also predicts other main decay modes of D s1 * (2860) and D s3 * (2860), which can be accessible at the future experiment. In addition, the decay behaviors of the spin partners of D s1 * (2860) and D s3 * (2860), i.e., 1D(2 - ) and 1D'(2 - ), are predicted in this work, which are still missing at present. The experimental search for the missing 1D(2 - ) and 1D'(2 - ) charmed-strange mesons is an intriguing and challenging task for further experiments. (orig.)

  20. tavg3_2d_chm_Fx: MERRA Chem 2D IAU Diagnostics, Fluxes and Meteorology, Time Average 3-hourly 1.25 x 1 degree V5.2.0 (MAT3FXCHM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3FXCHM or tavg3_3d_chm_Fx data product is the MERRA Data Assimilation System Chemistry 2-Dimensional chemistry that is time averaged, single-level, at reduced...

  1. Regional Gastrointestinal Transit Times in Patients With Carcinoid Diarrhea: Assessment With the Novel 3D-Transit System.

    Science.gov (United States)

    Gregersen, Tine; Haase, Anne-Mette; Schlageter, Vincent; Gronbaek, Henning; Krogh, Klaus

    2015-07-30

    The paucity of knowledge regarding gastrointestinal motility in patients with neuroendocrine tumors and carcinoid diarrhea re-stricts targeted treatment. 3D-Transit is a novel, minimally invasive, ambulatory method for description of gastrointestinal motility. The system has not yet been evaluated in any group of patients. We aimed to test the performance of 3D-Transit in patients with carcinoid diarrhea and to compare the patients' regional gastrointestinal transit times (GITT) and colonic motility patterns with those of healthy subjects. Fifteen healthy volunteers and seven patients with neuroendocrine tumor and at least 3 bowel movements per day were inves-tigated with 3D-Transit and standard radiopaque markers. Total GITT assessed with 3D-Transit and radiopaque markers were well correlated (Spearman's rho = 0.64, P = 0.002). Median total GITT was 12.5 (range: 8.5-47.2) hours in patients versus 25.1 (range: 13.1-142.3) hours in healthy (P = 0.007). There was no difference in gastric emptying (P = 0.778). Median small intestinal transit time was 3.8 (range: 1.4-5.5) hours in patients versus 4.4 (range: 1.8-7.2) hours in healthy subjects (P = 0.044). Median colorectal transit time was 5.2 (range: 2.9-40.1) hours in patients versus 18.1 (range: 5.0-134.0) hours in healthy subjects (P = 0.012). Median frequency of pansegmental co-lonic movements was 0.45 (range: 0.03-1.02) per hour in patients and 0.07 (range: 0-0.61) per hour in healthy subjects (P = 0.045). Three-dimensional Transit allows assessment of regional GITT in patients with diarrhea. Patients with carcinoid diarrhea have faster than normal gastrointestinal transit due to faster small intestinal and colorectal transit times. The latter is caused by an increased frequency of pansegmental colonic movements.

  2. MERRA Chem 3D IAU C-Grid Edge Mass Flux, Time Average 3-Hourly (eta coord, 2/3x1/2L73) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3NECHM or tavg3_3d_chm_Ne data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layer Edges that is time averaged, 3D model...

  3. MERRA 2D IAU Diagnostic, Surface Fluxes, Time Average 1-hourly (2/3x1/2L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT1NXFLX or tavg1_2d_flx_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface turbulence flux diagnostic that is time averaged...

  4. 1,25-Dihydroxyvitamin D3 (1,25(OH)2D3) Signaling Capacity and the Epithelial-Mesenchymal Transition in Non-Small Cell Lung Cancer (NSCLC): Implications for Use of 1,25(OH)2D3 in NSCLC Treatment

    International Nuclear Information System (INIS)

    Upadhyay, Santosh Kumar; Verone, Alissa; Shoemaker, Suzanne; Qin, Maochun; Liu, Song; Campbell, Moray; Hershberger, Pamela A.

    2013-01-01

    1,25-dihydroxyvitamin D 3 (1,25(OH) 2 D 3 ) exerts anti-proliferative activity by binding to the vitamin D receptor (VDR) and regulating gene expression. We previously reported that non-small cell lung cancer (NSCLC) cells which harbor epidermal growth factor receptor (EGFR) mutations display elevated VDR expression (VDR high ) and are vitamin D-sensitive. Conversely, those with K-ras mutations are VDR low and vitamin D-refractory. Because EGFR mutations are found predominately in NSCLC cells with an epithelial phenotype and K-ras mutations are more common in cells with a mesenchymal phenotype, we investigated the relationship between vitamin D signaling capacity and the epithelial mesenchymal transition (EMT). Using NSCLC cell lines and publically available lung cancer cell line microarray data, we identified a relationship between VDR expression, 1,25(OH) 2 D 3 sensitivity, and EMT phenotype. Further, we discovered that 1,25(OH) 2 D 3 induces E-cadherin and decreases EMT-related molecules SNAIL, ZEB1, and vimentin in NSCLC cells. 1,25(OH) 2 D 3 -mediated changes in gene expression are associated with a significant decrease in cell migration and maintenance of epithelial morphology. These data indicate that 1,25(OH) 2 D 3 opposes EMT in NSCLC cells. Because EMT is associated with increased migration, invasion, and chemoresistance, our data imply that 1,25(OH) 2 D 3 may prevent lung cancer progression in a molecularly defined subset of NSCLC patients

  5. Precipitation Processes developed during ARM (1997), TOGA COARE (1992), GATE (1974), SCSMEX (1998), and KWAJEX (1999), Consistent 2D, semi-3D and 3D Cloud Resolving Model Simulations

    Science.gov (United States)

    Tao, Wei-Kuo; Hou, A.; Atlas, R.; Starr, D.; Sud, Y.

    2003-01-01

    Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. The major objectives of this paper are: (1) to assess the performance of the super-parameterization technique (i.e. is 2D or semi-3D CRM appropriate for the super-parameterization?); (2) calculate and examine the surface energy (especially radiation) and water budgets; (3) identify the differences and similarities in the organization and entrainment rates of convection between simulated 2D and 3D cloud systems.

  6. 124I-Epidepride: A PET radiotracer for extended imaging of dopamine D2/D3 receptors

    International Nuclear Information System (INIS)

    Pandey, Suresh; Venugopal, Archana; Kant, Ritu; Coleman, Robert; Mukherjee, Jogeshwar

    2014-01-01

    Objectives: A new radiotracer, 124 I-epidepride, has been developed for the imaging of dopamine D2/3 receptors (D2/3Rs). 124 I-Epidepride (half-life of 124 I = 4.2 days) allows imaging over extended periods compared to 18 F-fallypride (half-life of 18 F = 0.076 days) and may maximize visualization of D2/3Rs in the brain and pancreas (allowing clearance from adjacent organs). D2/3Rs are also present in pancreatic islets where they co-localize with insulin to produce granules and may serve as a surrogate marker for imaging diabetes. Methods: 124 I-Epidepride was synthesized using N-[[(2S)-1-ethylpyrrolidin-2-yl]methyl]-5-tributyltin-2, 3-dimethoxybenzamide and 124 I-iodide under no carrier added condition. Rats were used for in vitro and in vivo imaging. Brain slices were incubated with 124 I-epidepride (0.75 μCi/cc) and nonspecific binding measured with 10 μM haloperidol. Autoradiograms were analyzed by OptiQuant. 124 I-Epidepride (0.2 to 0.3 mCi, iv) was administered to rats and brain uptake at 3 hours, 24 hours, and 48 hours post injection was evaluated. Results: 124 I-Epidepride was obtained with 50% radiochemical yield and high radiochemical purity (> 95%). 124 I-Epidepride localized in the striatum with a striatum to cerebellum ratio of 10. Binding was displaced by dopamine and haloperidol. Brain slices demonstrated localization of 124 I-epidepride up until 48 hours in the striatum. However, the extent of binding was reduced significantly. Conclusions: 124 I-Epidepride is a new radiotracer suitable for extended imaging of dopamine D2/3 receptors and may have applications in imaging of receptors in the brain and monitoring pancreatic islet cell grafting

  7. Studies on the T sub 3 suppression test with reference to the thyrodial sup 123 I uptake in Graves' disease; Comparison of 24-hour and 3-hour uptake

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, Takahiko; Kobayashi, Isao; Yamaguchi, Yoshiyuki; Iwashita, Akira; Inukai, Toshihiko; Ohshima, Kihachi; Shimomura, Yohnosuke; Kobayashi, Setsuo (Gunma Univ., Maebashi (Japan). School of Medicine)

    1990-06-01

    Eighty-three patients with Graves' disease had been treated with methylmercaptoimidazole (MMI). They were prescribed a maintenance dose of antithyroid drug (MMI, 5 mg/day) at the time of a T{sub 3} suppression test. The 3-hour and 24-hour thyroidal {sup 123}I uptake after T{sub 3} administration (75 {mu}g/day, 2 weeks) were measured (post T{sub 3} uptake). In 38 patients whose post T{sub 3} uptake was below 35% in post T{sub 3} 24-hour uptake, treatment was stopped. The T{sub 3} suppression test was then repeated 1 and 3 months later. During a one-year follow up, 26 remained well, while 12 relapsed within 6 to 12 months. We have observed a good correlation between 3-hour uptake and 24-hour uptake of {sup 123}I after T{sub 3} administration (r=0.847, p<0.001). In 38 patients who showed positive T{sub 3} suppression, most patients with MMI withdrawal produced a marked overshoot of post T{sub 3} 3-hour and 24-hour uptake at one month. Retrospective analysis indicated that there was no significant difference in circulating thyroid hormone levels between remission and relapse groups. The present study provides evidence that 3-hour uptake values are able to be substituted for 24-hour uptake values during a T{sub 3} suppression test. In addition, overshoot of thyroidal uptake after antithyroid drug withdrawal was observed in 3-hour values, similar to 24-hour values. (author).

  8. MERRA Chem 2D IAU Diagnostics, Fluxes and Meteorology, Time Average 3-hourly (surface, 1.25x1L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3FXCHM or tavg3_3d_chm_Fx data product is the MERRA Data Assimilation System Chemistry 2-Dimensional chemistry that is time averaged, single-level, at reduced...

  9. Predictors of Vitamin D Deficiency in Predialysis Patients with Stage ...

    African Journals Online (AJOL)

    Objective: Vitamin D status and risk factors of Vitamin D deficiency in chronic kidney disease (CKD) patients in China have been seldom reported before. In this study, we aim to investigate serum 25‑hydroxyvitamin D [25(OH)D] status and find the predictors of Vitamin D deficiency in predialysis patients with Stage 3–5 CKDs ...

  10. Negative effect of cyclin D1 overexpression on recurrence-free survival in stage II-IIIA lung adenocarcinoma and its expression modulation by vorinostat in vitro.

    Science.gov (United States)

    Lee, Eunju; Jin, DongHao; Lee, Bo Bin; Kim, Yujin; Han, Joungho; Shim, Young Mog; Kim, Duk-Hwan

    2015-12-17

    This study was aimed at identifying prognostic biomarkers for stage II-IIIA non-small cell lung cancer (NSCLC) according to histology and at investigating the effect of vorinostat on the expression of these biomarkers. Expression levels of cyclin D1, cyclin A2, cyclin E, and p16 proteins that are involved in the G1-to-S phase progression of cell cycle were analyzed using immunohistochemistry in formalin-fixed paraffin-embedded tissues from 372 samples of stage II-IIIA NSCLC. The effect of vorinostat on the expression of these proteins, impacts on cell cycle, and histone modification was explored in lung cancer cells. Abnormal expression of cyclin A2, cyclin D1, cyclin E, and p16 was found in 66, 47, 34, and 51 % of 372 cases, respectively. Amongst the four proteins, only cyclin D1 overexpression was significantly associated with poor recurrence-free survival (adjusted hazard ratio = 1.87; 95 % confidence interval = 1.12 - 2.69, P = 0.02) in adenocarcinoma but not in squamous cell carcinoma (P = 0.44). Vorinostat inhibited cell cycle progression to the S-phase and induced down-regulation of cyclin D1 in vitro. The down-regulation of cyclin D1 by vorinostat was comparable to a siRNA-mediated knockdown of cyclin D1 in A549 cells, but vorinostat in the presence of benzo[a]pyrene showed a differential effect in different lung cancer cell lines. Cyclin D1 down-regulation by vorinostat was associated with the accumulation of dimethyl-H3K9 at the promoter of the gene. The present study suggests that cyclin D1 may be an independent prognostic factor for recurrence-free survival in stage II-IIIA adenocarcinoma of lung and its expression may be modulated by vorinostat.

  11. [Circadian rhythm variation of the clock genes Per1 and cell cycle related genes in different stages of carcinogenesis of buccal mucosa in animal model].

    Science.gov (United States)

    Tan, Xuemei; Ye, Hua; Yang, Kai; Chen, Dan; Tang, Hong

    2015-07-01

    To investigate the expression and circadian rhythm variation of biological clock gene Per1 and cell cycle genes p53, CyclinD1, cyclin-dependent kinases (CDK1), CyclinB1 in different stages of carcinogenesis in buccal mucosa and its relationship with the development of buccal mucosa carcinoma. Ninety golden hamsters were housed under 12 hours light-12 hours dark cycles, and the model of buccal squamous cell carcinoma was established by using the dimethylbenzanthracene (DMBA) to smear the golden hamster buccal mucosa. Before the DMBA was used and after DMBA was used 6 weeks and 14 weeks respectively, the golden hamsters were sacrificed at 6 different time points (5 rats per time point) within 24 hour, including 4, 8, 12, 16, 20 and 24 hour after lights onset (HALO), and the normal buccal mucosa, precancerous lesions and cancer tissue were obtained, respectively. HE stained sections were prepared to observe the canceration of each tissue. Real time RT-PCR was used to detect the mRNA expression of Per1, p53, CyclinD1, CDK1 and CyclinB1, and a cosine analysis method was applied to determine the circadian rhythm variation of Per1, p53, CyclinD1, CDK1 and CyclinB1 mRNA expression, which were characterized by median, amplitude and acrophase. The expression of Per1, p53, CDK1 and CyclinD1 mRNA in 6 different time points within 24 hours in the tissues of three different stages of carcinogenesis had circadian rhythm, respectively. However, the CyclinB1 mRNA was expressed with circadian rhythm just in normal and cancer tissue (P circadian rhythm was in disorder (P > 0.05). As the development of carcinoma, the median of Per1 and p53 mRNA expression were significantly decreased (P circadian rhythm of clock gene Per1 and cell cycle genes p53, CyclinD1, CDK1, CyclinB1 expression remarkably varied with the occurrence and development of carcinoma. Further research into the interaction between circadian and cell cycle of two cycle activity and relationship with the carcinogenesis may

  12. The effect of modafinil on the rat dopamine transporter and dopamine receptors D1-D3 paralleling cognitive enhancement in the radial arm maze

    Directory of Open Access Journals (Sweden)

    Yasemin eKarabacak

    2015-08-01

    Full Text Available A series of drugs have been reported to increase memory performance modulating the dopaminergic system and herein modafinil was tested for its working memory (WM enhancing properties. Reuptake inhibition of dopamine, serotonin (SERT and norepinephrine (NET by modafinil was tested. 60 male Sprague Dawley rats were divided into six groups (modafinil-treated 1-5-10 mg/kg body weight, trained and untrained and vehicle treated trained and untrained rats; daily injected intraperitoneally for a period of 10 days and tested in a radial arm maze (RAM, a paradigm for testing spatial WM. Hippocampi were taken six hours following the last day of training and complexes containing the unphosphorylated or phosphorylated dopamine transporter (DAT-CC and pDAT-CC and complexes containing the D1-3 dopamine receptor subunits (D1-D3-CC were determined. Modafinil was binding to the DAT but insignificantly to SERT or NET and dopamine reuptake was blocked specifically (IC50=11.11; SERT 1547; NET 182. From day 8 (day 9 for 1 mg/kg body weight modafinil was decreasing WM errors in the RAM significantly and remarkably at all doses tested as compared to the vehicle controls. WMEs were linked to the D2R-CC and the pDAT-CC. pDAT and D1-D3-CC levels were modulated significantly and modafinil was shown to enhance spatial WM in the rat in a well-documented paradigm at all the three doses and dopamine reuptake inhibition with subsequent modulation of D1-3-CC is proposed as a possible mechanism of action.

  13. MERRA 3D Analyzed State, Meteorology Instantaneous 6-hourly (p-coord, 2/3x1/2L42) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAI6NPANA or inst6_3d_ana_Np data product is the MERRA Data Assimilation System 3-Dimensional instantaneous, on pressure levels, at native resolution. MERRA, or...

  14. Expression of proteins FGFR3, PI3K, AKT, p21Waf1/Cip1 and cyclins D1 and D3 in patients with T1 bladder tumours: clinical implications and prognostic significance.

    Science.gov (United States)

    Blanca Pedregosa, A M; Sánchez-González, Á; Carrasco Valiente, J; Ruiz García, J M; Gómez Gómez, E; López Beltrán, A; Requena Tapia, M J

    2017-04-01

    To determine the differential protein expression of biomarkers FGFR3, PI3K (subunits PI3Kp110α, PI3KClassIII, PI3Kp85), AKT, p21Waf1/Cip1 and cyclins D1 and D3 in T1 bladder cancer versus healthy tissue and to study their potential role as early recurrence markers. This is a prospective study that employed a total of 67 tissue samples (55 cases of T1 bladder tumours that underwent transurethral resection and 12 cases of adjacent healthy mucosa). The protein expression levels were assessed using Western blot, and the means and percentages were compared using Student's t-test and the chi-squared test. The survival analysis was conducted using the Kaplan-Meier method and the log-rank test. Greater protein expression was detected for FGFR3, PI3Kp110α, PI3KClassIII, cyclins D1 and D3 and p21Waf1/Cip1 in the tumour tissue than in the healthy mucosa. However, these differences were not significant for PI3Kp85 and AKT. We observed statistically significant correlations between early recurrence and PI3Kp110α, PI3KClassIII, PI3Kp85 and AKT (P=.003, P=.045, P=.050 and P=.028, respectively), between the tumour type (primary vs. recurrence) and cyclin D3 (P=.001), between the tumour size and FGFR3 (P=.035) and between multifocality and cyclin D1 (P=.039). The survival analysis selected FGFR3 (P=.024), PI3Kp110α (P=.014), PI3KClassIII (P=.042) and AKT (P=.008) as markers of early-recurrence-free survival. There is an increase in protein expression levels in bladder tumour tissue. The overexpression of FGFR3, PI3Kp110α, PI3KClassIII and AKT is associated with increased early-recurrence-free survival for patients with T1 bladder tumours. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  15. Free and open-source automated 3-D microscope.

    Science.gov (United States)

    Wijnen, Bas; Petersen, Emily E; Hunt, Emily J; Pearce, Joshua M

    2016-11-01

    Open-source technology not only has facilitated the expansion of the greater research community, but by lowering costs it has encouraged innovation and customizable design. The field of automated microscopy has continued to be a challenge in accessibility due the expense and inflexible, noninterchangeable stages. This paper presents a low-cost, open-source microscope 3-D stage. A RepRap 3-D printer was converted to an optical microscope equipped with a customized, 3-D printed holder for a USB microscope. Precision measurements were determined to have an average error of 10 μm at the maximum speed and 27 μm at the minimum recorded speed. Accuracy tests yielded an error of 0.15%. The machine is a true 3-D stage and thus able to operate with USB microscopes or conventional desktop microscopes. It is larger than all commercial alternatives, and is thus capable of high-depth images over unprecedented areas and complex geometries. The repeatability is below 2-D microscope stages, but testing shows that it is adequate for the majority of scientific applications. The open-source microscope stage costs less than 3-9% of the closest proprietary commercial stages. This extreme affordability vastly improves accessibility for 3-D microscopy throughout the world. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

  16. Comparing the Effects of Symbiotic Algae (Symbiodinium) Clades C1 and D on Early Growth Stages of Acropora tenuis

    Science.gov (United States)

    Yuyama, Ikuko; Higuchi, Tomihiko

    2014-01-01

    Reef-building corals switch endosymbiotic algae of the genus Symbiodinium during their early growth stages and during bleaching events. Clade C Symbiodinium algae are dominant in corals, although other clades — including A and D — have also been commonly detected in juvenile Acroporid corals. Previous studies have been reported that only molecular data of Symbiodinium clade were identified within field corals. In this study, we inoculated aposymbiotic juvenile polyps with cultures of clades C1 and D Symbiodinium algae, and investigated the different effect of these two clades of Symbiodinium on juvenile polyps. Our results showed that clade C1 algae did not grow, while clade D algae grew rapidly during the first 2 months after inoculation. Polyps associated with clade C1 algae exhibited bright green fluorescence across the body and tentacles after inoculation. The growth rate of polyp skeletons was lower in polyps associated with clade C1 algae than those associated with clade D algae. On the other hand, antioxidant activity (catalase) of corals was not significantly different between corals with clade C1 and clade D algae. Our results suggested that clade D Symbiodinium algae easily form symbiotic relationships with corals and that these algae could contribute to coral growth in early symbiosis stages. PMID:24914677

  17. From 3D view to 3D print

    Science.gov (United States)

    Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

    2014-08-01

    In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers

  18. MERRA Chem 3D IAU C-Grid Wind and Mass Flux, Time Average 3-Hourly (eta coord, 2/3x1/2L72) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3NVCHM or tavg3_3d_chm_Nv data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layers that is time averaged, 3D model...

  19. Detection of vancomycin resistances in enterococci within 3 1/2 hours

    Science.gov (United States)

    Schröder, U. -Ch.; Beleites, C.; Assmann, C.; Glaser, U.; Hübner, U.; Pfister, W.; Fritzsche, W.; Popp, J.; Neugebauer, U.

    2015-02-01

    Vancomycin resistant enterococci (VRE) constitute a challenging problem in health care institutions worldwide. Novel methods to rapidly identify resistances are highly required to ensure an early start of tailored therapy and to prevent further spread of the bacteria. Here, a spectroscopy-based rapid test is presented that reveals resistances of enterococci towards vancomycin within 3.5 hours. Without any specific knowledge on the strain, VRE can be recognized with high accuracy in two different enterococci species. By means of dielectrophoresis, bacteria are directly captured from dilute suspensions, making sample preparation very easy. Raman spectroscopic analysis of the trapped bacteria over a time span of two hours in absence and presence of antibiotics reveals characteristic differences in the molecular response of sensitive as well as resistant Enterococcus faecalis and Enterococcus faecium. Furthermore, the spectroscopic fingerprints provide an indication on the mechanisms of induced resistance in VRE.

  20. (3,5-Dimethylpyrazol-1-yl-[4-(1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4-ylaminophenyl]methanone

    Directory of Open Access Journals (Sweden)

    Rania B. Bakr

    2016-11-01

    Full Text Available In an attempt to enhance cytotoxic activity of pyrazolo[3,4-d]pyrimidine core, we synthesized (3,5-dimethylpyrazol-1-yl-[4-(1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4-ylaminophenyl]methanone (4 by reacting 4-(1-phenyl-1H-pyrazolo[3,4-d]pyrimidin-4-ylaminobenzohydrazide (3 with acetylacetone. Antiproliferative activity of this compound was screened against breast (MCF-7, colon (HCT-116, and liver (HEPG-2 cancer cell lines. The tested compound exhibited cytotoxic activity with IC50 = 5.00–32.52 μM. Moreover, inhibitory activity of this compound was evaluated against the epidermal growth factor receptor (EGFR, the fibroblast growth factor receptor (FGFR, the insulin receptor (IR, and the vascular endothelial growth factor receptor (VEGFR. This target compound showed potent inhibitory activity, especially against FGFR with IC50 = 5.18 μM.

  1. Development of a 3D consistent 1D neutronics model for reactor core simulation

    International Nuclear Information System (INIS)

    Lee, Ki Bog; Joo, Han Gyu; Cho, Byung Oh; Zee, Sung Quun

    2001-02-01

    In this report a 3D consistent 1D model based on nonlinear analytic nodal method is developed to reproduce the 3D results. During the derivation, the current conservation factor (CCF) is introduced which guarantees the same axial neutron currents obtained from the 1D equation as the 3D reference values. Furthermore in order to properly use 1D group constants, a new 1D group constants representation scheme employing tables for the fuel temperature, moderator density and boron concentration is developed and functionalized for the control rod tip position. To test the 1D kinetics model with CCF, several steady state and transient calculations were performed and compared with 3D reference values. The errors of K-eff values were reduced about one tenth when using CCF without significant computational overhead. And the errors of power distribution were decreased to the range of one fifth or tenth at steady state calculation. The 1D kinetics model with CCF and the 1D group constant functionalization employing tables as a function of control rod tip position can provide preciser results at the steady state and transient calculation. Thus it is expected that the 1D kinetics model derived in this report can be used in the safety analysis, reactor real time simulation coupled with system analysis code, operator support system etc.

  2. New coordination polymers from 1D chain, 2D layer to 3D framework constructed from 1,2-phenylenediacetic acid and 1,3-bis(4-pyridyl)propane flexible ligands

    Science.gov (United States)

    Xin, Ling-Yun; Liu, Guang-Zhen; Wang, Li-Ya

    2011-06-01

    The hydrothermal reactions of Cd, Zn, or Cu(II) acetate salts with H 2PHDA and BPP flexible ligands afford three new coordination polymers, including [Cd(PHDA)(BPP)(H 2O)] n(1), [Zn(PHDA)(BPP)] n(2), and [Cu 2(PHDA) 2(BPP)] n(3) (H 2PHDA=1,2-phenylenediacetic acid, BPP=1,3-bis(4-pyridyl)propane). The single-crystal X-ray diffractions reveal that all three complexes feature various metal carboxylate subunits extended further by the BPP ligands to form a diverse range of structures, displaying a remarked structural sensitivity to metal(II) cation. Complex 1 containing PHDA-bridged binuclear cadmium generates 1D double-stranded chain, complex 2 results in 2D→2D interpenetrated (4,4) grids, and complex 3 displays a 3D self-penetrated framework with 4 86 68 rob topology. In addition, fluorescent analyses show that both 1 and 2 exhibit intense blue-violet photoluminescence in the solid state.

  3. From 2D to 3D: The morphology, proliferation and differentiation of MC3T3-E1 on silk fibroin/chitosan matrices.

    Science.gov (United States)

    Li, Da-Wei; He, Feng-Li; He, Jin; Deng, Xudong; Liu, Ya-Li; Liu, Yang-Yang; Ye, Ya-Jing; Yin, Da-Chuan

    2017-12-15

    It has been widely accepted that cell culture in two-dimensional (2D) conditions may not be able to represent growth in three-dimensional (3D) conditions. Systematic comparisons between 2D and 3D cell cultures are needed to appropriately use the existing 2D results. In this work, we conducted a comparative study between 2D and 3D cell cultures of MC3T3-E1 using the same type of material (a mixture of silk fibroin (SF) and chitosan (CS)). Our results showed 3D SF/CS scaffold exhibited different effects on cell culture compared with the 2D cases. 1) The cells grown in 3D scaffold showed multiple morphologies. 2) The proliferation of cells in 3D scaffold was long-term and sustainable. 3) Cell differentiation occurred throughout the entire 3D scaffold. The results showed that cell culture in 3D SF/CS scaffold exhibited different features than 2D cases and 3D SF/CS scaffold could be a promising material for 3D cell culture. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Precipitation Processes Developed During ARM (1997), TOGA COARE (1992) GATE (1974), SCSMEX (1998), and KWAJEX (1999): Consistent 3D, Semi-3D and 3D Cloud Resolving Model Simulations

    Science.gov (United States)

    Tao, W.-K.; Hou, A.; Atlas, R.; Starr, D.; Sud, Y.

    2003-01-01

    Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D) have been used to study the response of clouds to large-scale forcing. IN these 3D simulators, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical clouds systems with large horizontal domains at the National Center of Atmospheric Research (NCAR) and at NASA Goddard Space Center. At Goddard, a 3D cumulus Ensemble (GCE) model was used to simulate periods during TOGA COARE, GATE, SCSMEX, ARM, and KWAJEX using a 512 by 512 km domain (with 2-km resolution). The result indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D GCE model simulation. The major objective of this paper are: (1) to assess the performance of the super-parametrization technique, (2) calculate and examine the surface energy (especially radiation) and water budget, and (3) identify the differences and similarities in the organization and entrainment rates of convection between simulated 2D and 3D cloud systems.

  5. Management of severe subarachnoid hemorrhage (SAH) with diffusion-weighted imaging in acute stage

    International Nuclear Information System (INIS)

    Shamoto, Hiroshi; Shimizu, Hiroaki; Matsumoto, Yasushi; Fujiwara, Satoru; Tominaga, Teiji

    2007-01-01

    Determining the treatment strategy of severe subarachnoid hemorrhage (SAH) (Hunt and Kosnik Grade 4 and 5) requires objective evaluation to represent severity. In the present study, we investigated the role of diffusion-weighted imaging (DWI) in the acute stage as an objective tool. DWI was performed within 48 hours after the onset and preoperatively in 36 patients who fulfilled following the inclusion criteria: admission Hunt and Kosnik Grade 4 or 5, and Fischer Group 3. Twelve of 14 patients without abnormal findings in DWI underwent surgery in the acute stage. Although 2 of 14 patients with high age were supposed to undergo surgery in the chronic stage, 1 patient died in aneurysmal re-rupture. Glasgow outcome scales (GOS) were good recovery (GR) in 5, moderate disability (MD) in 6, standard deviation (SD) in 1 and D in 2 patients. Thirteen of 22 patients with DWI abnormality had small lesions less than 10 mm in diameter. Twelve of 13 patients underwent surgery in the acute stage, and 1 died of aneurysmal re-rupture while waiting for surgery in the chronic stage. GOS were GR in 3, MD in 4, SD in 3 and D in 3 patients. Although 5 patients with diffuse DWI lesions underwent surgery in the acute stage, 2 were SD and 3 were D. Four patients were supposed to undergo delayed surgery. However, 2 of them died of recurrent hemorrhage while waiting. GOS were SD in 2 and D in 2 patients. The present study indicates that DWI may provide objective evaluation of brain damage in severe SAH. However, since there were varieties of DWI findings and clinical courses, careful decisions must be taken in management of severe SAH patients. (author)

  6. MERRA 2D IAU Diagnostic, Single Level Meteorology, Time Average 1-hourly (2/3x1/2L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT1NXSLV or tavg1_2d_slv_Nx data product is the MERRA Data Assimilation System 2-Dimensional atmospheric single-level diagnostics that is time averaged...

  7. Site characterization and validation - Borehole radar investigations stage 3

    International Nuclear Information System (INIS)

    Sandberg, E.; Olsson, O.; Falk, L.

    1989-11-01

    The borehole radar investigation program Stage 3 of the SCV-site has comprised single hole reflection measurements with centre frequencies of 22 and 60 MHz. Single hole reflection measurement with both omni-directional and directional antennas have been performed in the boreholes C1, C2, C3 and the D-holes. Crosshole tomographic measurements as well as cross- hole reflection measurement have been made between the bore- holes C1-C2, W1-C1 and W1-C2. The range obtained in the single hole reflection measurements was approximately 100 m for the lower frequency and about 60-70 m for the centre frequency 60 MHz. In the crosshole measurements transmitter-receiver separations from 20 to 120 m have been used. The Stage 3 radar investigations have essentially confirmed the three dimensional description of the structures at the SCV-site. The conceptual model of the site which was produced based on the Stage 1 data included three major zones, two minor zones and a circular feature. The major features are considered to be the most significant at the site and are all observed in the Stage 3 boreholes close to their predicted locations. The circular feature has also been found in two of the additional tomograms at the predicted location. The results indicate that the zones are not homogeneous but rather that they are highly irregular containing parts of considerably increased fracturing and parts where their contrast to the background rock is quite small. The zones appear to be approximately planar at least at the scale of the site. At a smaller scale the zones can appear quite irregular

  8. SiB3 Modeled Global 1-degree Hourly Biosphere-Atmosphere Carbon Flux, 1998-2006

    Data.gov (United States)

    National Aeronautics and Space Administration — The Simple Biosphere Model, Version 3 (SiB3) was used to produce a global data set of hourly carbon fluxes between the atmosphere and the terrestrial biosphere for...

  9. Cocaine Disrupts Histamine H3 Receptor Modulation of Dopamine D1 Receptor Signaling: σ1-D1-H3 Receptor Complexes as Key Targets for Reducing Cocaine's Effects

    Science.gov (United States)

    Moreno, Estefanía; Moreno-Delgado, David; Navarro, Gemma; Hoffmann, Hanne M.; Fuentes, Silvia; Rosell-Vilar, Santi; Gasperini, Paola; Rodríguez-Ruiz, Mar; Medrano, Mireia; Mallol, Josefa; Cortés, Antoni; Casadó, Vicent; Lluís, Carme; Ferré, Sergi; Ortiz, Jordi; Canela, Enric

    2014-01-01

    The general effects of cocaine are not well understood at the molecular level. What is known is that the dopamine D1 receptor plays an important role. Here we show that a key mechanism may be cocaine's blockade of the histamine H3 receptor-mediated inhibition of D1 receptor function. This blockade requires the σ1 receptor and occurs upon cocaine binding to σ1-D1-H3 receptor complexes. The cocaine-mediated disruption leaves an uninhibited D1 receptor that activates Gs, freely recruits β-arrestin, increases p-ERK 1/2 levels, and induces cell death when over activated. Using in vitro assays with transfected cells and in ex vivo experiments using both rats acutely treated or self-administered with cocaine along with mice depleted of σ1 receptor, we show that blockade of σ1 receptor by an antagonist restores the protective H3 receptor-mediated brake on D1 receptor signaling and prevents the cell death from elevated D1 receptor signaling. These findings suggest that a combination therapy of σ1R antagonists with H3 receptor agonists could serve to reduce some effects of cocaine. PMID:24599455

  10. Predictors of Vitamin D Deficiency in Predialysis Patients with Stage ...

    African Journals Online (AJOL)

    2017-12-05

    Dec 5, 2017 ... Objective: Vitamin D status and risk factors of Vitamin D deficiency in chronic kidney disease ... common in patients with chronic kidney diseases (CKD), especially in Stage 3–5 ... METHODS ... The blood pressure and laboratory data measured within ... sphygmomanometer three times after the participant.

  11. Multi-stage continuous alcohol fermentation with cane molasses

    Energy Technology Data Exchange (ETDEWEB)

    Chu, C J; Chiou, C J; Ng, A K; Lin, T C; Hwang, E C; Rao, C H

    1970-01-01

    It was reported that 6 to 7% ethanol was produced by single-stage continuous 12-hour cycle fermentation of molasses containing 12% sugar using a new strain, Saccharomyces formensensis, isolated from a stock culture. A higher yield of ethanol was obtained from 2-stage and 3-stage continuous fermentation of molasses containing more sugar at 24- and 36-hour cycles, respectively. In the 2-stage 24-hour cycle continuous fermentation of molasses containing 15% sugar with an agitation speed 300 rpm, 9.2% ethanol resulted. Only 3% sugar remained unconsumed. In the 3-stage 36-hour cycle continuous fermentation of molasses containing 15% sugar with 300 rpm agitation, 12.5% ethanol resulted.

  12. 1D to 3D diffusion-reaction kinetics of defects in crystals

    DEFF Research Database (Denmark)

    Trinkaus, H.; Heinisch, H.L.; Barashev, A.V.

    2002-01-01

    Microstructural features evolving in crystalline solids from diffusion-reaction kinetics of mobile components depend crucially on the dimension of the underlying diffusion process which is commonly assumed to be three-dimensional (3D). In metals, irradiation-induced displacement cascades produce...... clusters of self-interstitials performing 1D diffusion. Changes between equivalent 1D diffusion paths and transversal diffusion result in diffusion-reaction kinetics between one and three dimensions. An analytical approach suggests a single-variable function (master curve) interpolating between the 1D...

  13. Hourly cooling load forecasting using time-indexed ARX models with two-stage weighted least squares regression

    International Nuclear Information System (INIS)

    Guo, Yin; Nazarian, Ehsan; Ko, Jeonghan; Rajurkar, Kamlakar

    2014-01-01

    Highlights: • Developed hourly-indexed ARX models for robust cooling-load forecasting. • Proposed a two-stage weighted least-squares regression approach. • Considered the effect of outliers as well as trend of cooling load and weather patterns. • Included higher order terms and day type patterns in the forecasting models. • Demonstrated better accuracy compared with some ARX and ANN models. - Abstract: This paper presents a robust hourly cooling-load forecasting method based on time-indexed autoregressive with exogenous inputs (ARX) models, in which the coefficients are estimated through a two-stage weighted least squares regression. The prediction method includes a combination of two separate time-indexed ARX models to improve prediction accuracy of the cooling load over different forecasting periods. The two-stage weighted least-squares regression approach in this study is robust to outliers and suitable for fast and adaptive coefficient estimation. The proposed method is tested on a large-scale central cooling system in an academic institution. The numerical case studies show the proposed prediction method performs better than some ANN and ARX forecasting models for the given test data set

  14. New generation of 3D desktop computer interfaces

    Science.gov (United States)

    Skerjanc, Robert; Pastoor, Siegmund

    1997-05-01

    Today's computer interfaces use 2-D displays showing windows, icons and menus and support mouse interactions for handling programs and data files. The interface metaphor is that of a writing desk with (partly) overlapping sheets of documents placed on its top. Recent advances in the development of 3-D display technology give the opportunity to take the interface concept a radical stage further by breaking the design limits of the desktop metaphor. The major advantage of the envisioned 'application space' is, that it offers an additional, immediately perceptible dimension to clearly and constantly visualize the structure and current state of interrelations between documents, videos, application programs and networked systems. In this context, we describe the development of a visual operating system (VOS). Under VOS, applications appear as objects in 3-D space. Users can (graphically connect selected objects to enable communication between the respective applications. VOS includes a general concept of visual and object oriented programming for tasks ranging from, e.g., low-level programming up to high-level application configuration. In order to enable practical operation in an office or at home for many hours, the system should be very comfortable to use. Since typical 3-D equipment used, e.g., in virtual-reality applications (head-mounted displays, data gloves) is rather cumbersome and straining, we suggest to use off-head displays and contact-free interaction techniques. In this article, we introduce an autostereoscopic 3-D display and connected video based interaction techniques which allow viewpoint-depending imaging (by head tracking) and visually controlled modification of data objects and links (by gaze tracking, e.g., to pick, 3-D objects just by looking at them).

  15. Development of the virtual experimental bench on the basis of modernized research centrifugal compressor stage test unit with the 3D impeller.

    Science.gov (United States)

    Aksenov, A. A.; Danilishin, A. M.; Dubenko, A. M.; Kozhukov, Y. V.

    2017-08-01

    Design modernization of the centrifugal compressor stage test bench with three dimensional impeller blades was carried out for the possibility of holding a series of experimental studies of different 3D impeller models. The studies relates to the problem of joint work of the impeller and the stationary channels of the housing when carrying out works on modernization with the aim of improving the parameters of the volumetric capacity or pressure in the presence of design constraints. The object of study is the experimental single end centrifugal compressor stage with the 3D impeller. Compressor stage consists of the 3D impeller, vaneless diffuser (VLD), outlet collector - folded side scroll and downstream pipe. The drive is a DC motor 75 kW. The increase gear (multiplier) was set between the compressor and DC motor, gear ratio is i = 9.8. To obtain the characteristics of the compressor and the flow area the following values were measured: total pressure, static pressure, direction (angles) of the stream in different cross sections. Additional pneumometric probes on the front wall of the VLD of the test bench have been installed. Total pressure probes and foster holes for the measurement of total and static pressure by the new drainage scheme. This allowed carrying out full experimental studies for two elements of centrifugal compressor stage. After the experimental tests the comprehensive information about the performance of model stage were obtained. Was measured geometric parameters and the constructed virtual model of the experimental bench flow part with the help of Creo Parametric 3.0 and ANSYS v. 16.2. Conducted CFD calculations and verification with experimental data. Identifies the steps for further experimental and virtual works.

  16. Transcriptional effects of 1,25 dihydroxyvitamin D3 physiological and supra-physiological concentrations in breast cancer organotypic culture

    International Nuclear Information System (INIS)

    Milani, Cintia; Góes, João Carlos Guedes Sampaio; Nonogaki, Suely; Tamura, Rodrigo Esaki; Folgueira, Maria Aparecida Azevedo Koike; Katayama, Maria Lucia Hirata; Lyra, Eduardo Carneiro de; Welsh, JoEllen; Campos, Laura Tojeiro; Brentani, M Mitzi; Maciel, Maria do Socorro; Roela, Rosimeire Aparecida; Valle, Paulo Roberto del

    2013-01-01

    Vitamin D transcriptional effects were linked to tumor growth control, however, the hormone targets were determined in cell cultures exposed to supra physiological concentrations of 1,25(OH) 2 D 3 (50-100nM). Our aim was to evaluate the transcriptional effects of 1,25(OH) 2 D 3 in a more physiological model of breast cancer, consisting of fresh tumor slices exposed to 1,25(OH) 2 D 3 at concentrations that can be attained in vivo. Tumor samples from post-menopausal breast cancer patients were sliced and cultured for 24 hours with or without 1,25(OH) 2 D 3 0.5nM or 100nM. Gene expression was analyzed by microarray (SAM paired analysis, FDR≤0.1) or RT-qPCR (p≤0.05, Friedman/Wilcoxon test). Expression of candidate genes was then evaluated in mammary epithelial/breast cancer lineages and cancer associated fibroblasts (CAFs), exposed or not to 1,25(OH) 2 D 3 0.5nM, using RT-qPCR, western blot or immunocytochemistry. 1,25(OH) 2 D 3 0.5nM or 100nM effects were evaluated in five tumor samples by microarray and seven and 136 genes, respectively, were up-regulated. There was an enrichment of genes containing transcription factor binding sites for the vitamin D receptor (VDR) in samples exposed to 1,25(OH) 2 D 3 near physiological concentration. Genes up-modulated by both 1,25(OH) 2 D 3 concentrations were CYP24A1, DPP4, CA2, EFTUD1, TKTL1, KCNK3. Expression of candidate genes was subsequently evaluated in another 16 samples by RT-qPCR and up-regulation of CYP24A1, DPP4 and CA2 by 1,25(OH) 2 D 3 was confirmed. To evaluate whether the transcripitonal targets of 1,25(OH) 2 D 3 0.5nM were restricted to the epithelial or stromal compartments, gene expression was examined in HB4A, C5.4, SKBR3, MDA-MB231, MCF-7 lineages and CAFs, using RT-qPCR. In epithelial cells, there was a clear induction of CYP24A1, CA2, CD14 and IL1RL1. In fibroblasts, in addition to CYP24A1 induction, there was a trend towards up-regulation of CA2, IL1RL1, and DPP4. A higher protein expression of CD14 in

  17. Liver fibrosis detection and staging: a comparative study of T1ρ MR imaging and 2D real-time shear-wave elastography.

    Science.gov (United States)

    Li, Ruo-Kun; Ren, Xin-Pin; Yan, Fu-Hua; Qiang, Jin-Wei; Lin, Hui-Min; Tao Wang; Zhao, Hong-Fei; Chen, Wei-Bo

    2017-12-02

    To compare the results of T1ρ MR imaging and 2D real-time shear-wave elastography (SWE) for liver fibrosis detection and staging. Twenty-nine rabbit models of CCl 4 -induced liver fibrosis were established and six untreated rabbits served as controls. T1ρ MR imaging and 2D real-time SWE examination were performed at 2, 4, 6, 8, 10, and 12 weeks. T1ρ values and liver stiffness (LS) values were measured. Fibrosis was staged according to the METAVIR scoring system. Correlation test was performed among T1ρ values, LS values, and fibrosis stage. Receiver operating characteristic (ROC) analysis was performed for assessing diagnostic performance of T1ρ and SWE in detection of no fibrosis (F0), substantial fibrosis (≥ F2), severe fibrosis (≥ F3), and cirrhosis (F4). There was moderate positive correlation between fibrosis stage and T1ρ values (r = 0.566; 95% CI 0.291-0.754; P < 0.0001), and LS value (r = 0.726; 95% CI 0.521-0.851; P = 0.003). T1ρ values showed moderate positive correlations with LS values [r = 0.693; 95% confidence interval (CI) 0.472-0.832; P < 0.0001]. Areas Under ROC (AUROCs) were 0.861 (95% CI 0.705-0.953) for SWE and 0.856 (95% CI 0.698-0.950) for T1ρ (P = 0.940), 0.906 (95% CI 0.762-0.978) for SWE and 0.849 (95% CI 0.691-0.946) for T1ρ (P = 0.414), 0.870 (95% CI 0.716-0.958) for SWE and 0.799 (95% CI 0.632-0.913) for T1ρ (P = 0.422), and 0.846 (95% CI 0.687-0.944) for SWE and 0.692 (95% CI 0.517-0.835) for T1ρ (P = 0.137), when diagnosing liver fibrosis with ≥ F1, ≥ F2, ≥ F3, and F4, respectively. There was moderate positive correlation between inflammatory activity and T1ρ values (r = 0.520; 95% CI 0.158-0.807; P = 0.013). T1ρ imaging has potential for liver fibrosis detection and staging with good diagnostic capability similar to that of ultrasonography elastography.

  18. On the physiological role of 1,24,25-trihydroxyvitamin D/sub 3/

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, L. (Univ. of Wisconsin, Madison); Tanaka, Y.; DeLuca, H.F.; Ikekawa, N.

    1978-01-01

    The extent, onset and duration of the biological activity of 1,24(R),25-trihydroxyvitamin D/sub 3/, 1,24(S),25-trihydroxyvitamin D/sub 3/ has been compared with that of 1,25-dihydroxyvitamin D/sub 3/ in the elevation of serum phosphorus, healing of rickets, stimulation of intestinal calcium transport, mobilization of calcium from bone in vitamin D-deficient rats and induction 25-hydroxyvitamin D/sub 3/-24-hydroxylase in chickens. The 1,24,25-trihydroxyvitamin D/sub 3/ S and R isomers are approximately equal in activity but both are less active than 1,25-dihydroxyvitamin D/sub 3/. In some systems their duration of activity is also less than that of 1,25-dihydroxyvitamin D/sub 3/. The time course of response to the 3 forms of vitamin D is approximately equal. These results strongly suggest that 1,24(R),25-trihydroxyvitamin D/sub 3/ is not a further activation product of 1,25-dihydroxyvitamin D/sub 3/, but is likely a product leading to inactivation.

  19. Calculation of the energy of particles emitted by the reactions {sup 3}{sub 1}T (d,n) {sup 4}{sub 2}He, D (d,n) {sup 3}{sub 2}He and D (d,p) T; Calcul de l'energie des particules emises par les reactions {sup 3}{sub 1}T (d,n) {sup 4}{sub 2}He, D (d,n) {sup 3}{sub 2}He et D (d,p) T

    Energy Technology Data Exchange (ETDEWEB)

    Oria, M; Sorriaux, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    With a view to ease the work of research workers using 150 kV electrostatic accelerators, we have calculated the energy and the emission angle of particles emitted during the reactions {sub 1}{sup 3}T(d,n){sub 2}{sup 4}He, {sub 1}{sup 2}D(d,n){sub 2}{sup 3}He and {sub 1}{sup 2}D(d,p){sub 1}{sup 3}T. The results are classified in tables and arranged according to the acceleration energy of the deuterons. Since the energies considered are relatively low we have limited our study to the non-relativistic domain; this simplification results in a maximum energy variation with respect to the real energy values of 1 per cent. We give also two curves representing the variations in the total cross-sections for the reactions T (d,n){sub 2}{sup 4}He and D (d,n){sub 2}{sup 3}He. (authors) [French] De facon a faciliter la tache des experimentateurs utilisant des accelerateurs electrostatiques de 150 kV, nous avons calcule l'energie et l'angle d'emission des particules emises lors des reactions {sub 1}{sup 3}T(d,n){sub 2}{sup 4}He, {sub 1}{sup 2}D(d,n){sub 2}{sup 3}He and {sub 1}{sup 2}D(d,p){sub 1}{sup 3}T. Les resultats ont ete classes dans des tableaux, et ordonnes en fonction de l'energie d'acceleration des deuterons. Les energies considerees etant relativement peu elevees, nous avons limite notre etude au domaine non relativiste, cette simplification n'entraine qu'une variation maximale de 1 pour cent sur les valeurs reelles des energies. Nous avons joint a ce calcul deux courbes representant la variation des sections efficaces totales des reactions T (d,n){sub 2}{sup 4}He et D (d,n){sub 2}{sup 3}He. (auteurs)

  20. The vitamin D analogue ED71 but Not 1,25(OH2D3 targets HIF1α protein in osteoclasts.

    Directory of Open Access Journals (Sweden)

    Yuiko Sato

    Full Text Available Although both an active form of the vitamin D metabolite, 1,25(OH2D3, and the vitamin D analogue, ED71 have been used to treat osteoporosis, anti-bone resorbing activity is reportedly seen only in ED71- but not in 1,25(OH2D3 -treated patients. In addition, how ED71 inhibits osteoclast activity in patients has not been fully characterized. Recently, HIF1α expression in osteoclasts was demonstrated to be required for development of post-menopausal osteoporosis. Here we show that ED71 but not 1,25(OH2D3, suppress HIF1α protein expression in osteoclasts in vitro. We found that 1,25(OH2D3 or ED71 function in osteoclasts requires the vitamin D receptor (VDR. ED71 was significantly less effective in inhibiting M-CSF and RANKL-stimulated osteoclastogenesis than was 1,25(OH2D3 in vitro. Downregulation of c-Fos protein and induction of Ifnβ mRNA in osteoclasts, both of which reportedly block osteoclastogenesis induced by 1,25(OH2D3 in vitro, were both significantly higher following treatment with 1,25(OH2D3 than with ED71. Thus, suppression of HIF1α protein activity in osteoclasts in vitro, which is more efficiently achieved by ED71 rather than by 1,25(OH2D3, could be a reliable read-out in either developing or screening reagents targeting osteoporosis.

  1. Human neutrophil peptides 1, 2 and 3 are biochemical markers for metastatic colorectal cancer

    DEFF Research Database (Denmark)

    Albrethsen, Jakob; Møller, Christian H; Olsen, Jesper

    2006-01-01

    -D, whereas HNP1-3 in plasma was only elevated in Dukes' stage D compared to healthy individuals. HNP1-3 plasma concentration determined with ELISA was increased in Dukes' stages C and D, but not in A and B. It is concluded that HNP1-3 is a potential marker for prognostic assessment, surveillance of patients...

  2. 1,25-Dihydroxyvitamin D3 Inhibits the RANKL Pathway and Impacts on the Production of Pathway-Associated Cytokines in Early Rheumatoid Arthritis

    Directory of Open Access Journals (Sweden)

    Jing Luo

    2013-01-01

    Full Text Available Objectives. To study effects of 1,25-dihydroxyvitamin D3 (1,25(OH2D3 on RANKL signaling pathway and pathway-associated cytokines in patients with rheumatoid arthritis (RA. Methods. Receptor activator of nuclear factor-kappa B ligand (RANKL, osteoprotegerin (OPG, IFN-γ, IL-6, TNF-α, IL-17, and IL-4 were examined in 54 patients with incipient RA using a cytometric bead array (CBA or an enzyme-linked immunosorbent assay (ELISA. Results. After 72 hours of incubation of peripheral blood mononuclear cells (PBMCs with 1,25(OH2D3 in RA patients, the levels of RANKL, TNF-α, IL-17 and IL-6 significantly decreased compared to those of the control. 1,25(OH2D3 had no significantly impact on the levels of OPG, RANKL/OPG, and IL-4. Conclusions. The present study demonstrated that 1,25(OH2D3 reduced the production of RANKL and the secretion of TNF-α, IL-17, and IL-6 in PBMCs of RA patients, which indicated that 1,25(OH2D3 might be able to decrease damage of cartilage and bone in RA patients by regulating the expression of RANKL signaling pathway and pathway-associated cytokines.

  3. Elevation of plasma milrinone concentrations in stage D heart failure associated with renal dysfunction.

    Science.gov (United States)

    Cox, Zachary L; Calcutt, Marion W; Morrison, Thomas B; Akers, Wendell S; Davis, Mary Beth; Lenihan, Daniel J

    2013-09-01

    To determine steady state milrinone concentrations in patients with stage D heart failure (HF) with and without renal dysfunction We retrospectively identified patients with stage D HF at a single medical center on continuous milrinonein fusion at the time of plasma collection for entry into a research registry database. Milrinone was prescribed and titrated to improve hemodynamic and clinical status by a cardiologist. Plasma samples were obtained at steady state milrinone concentrations. Patients were stratified by creatinine clearance (CrCl) into 4 groups: group 1 (CrCl >60 mL/min), group 2 (CrCl 60-30 mL/min), group 3 (CrCl milrinone hemodynamic changes by cardiac catheterization and electrophysiologic changes by implantable cardiac defibrillator (ICD) interrogation. A total of 29 patients were identified: group 1 (n=14), group 2 (n=10), group 3(n=3), and group 4 (n = 2). The mean infusion rate (0.391+0.08 mg/kg/min) did not differ between groups (P=0.14). The mean milrinone concentration was 451+243 ng/mL in group 1, 591+293 ng/mL in group 2, 1575+962 ng/mL in group 3, and 6252+4409 ng/mL in group 4 (Pmilrinone hemodynamic improvements between the groups (P=0.41). The ICD interrogation revealed limited comparisons, but 6 of the 8 post milrinone ventricular tachycardia episodes requiring defibrillation occurred in group 4 patients. Patients with stage D HF having severe renal dysfunction have elevated milrinone concentrations. Future studies of milrinone concentrations are warranted to investigate the potential risk of life-threatening arrhythmias and potential dosing regimens in renal dysfunction.

  4. 1,25-Dihydroxyvitamin D{sub 3} (1,25(OH){sub 2}D{sub 3}) Signaling Capacity and the Epithelial-Mesenchymal Transition in Non-Small Cell Lung Cancer (NSCLC): Implications for Use of 1,25(OH){sub 2}D{sub 3} in NSCLC Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyay, Santosh Kumar; Verone, Alissa; Shoemaker, Suzanne [Department of Pharmacology and Therapeutics, Roswell Park Cancer Institute, Elm and Carlton Streets, Buffalo, NY 14263 (United States); Qin, Maochun; Liu, Song [Department of Biostatistics and Bioinformatics, Roswell Park Cancer Institute, Elm and Carlton Streets, Buffalo, NY 14263 (United States); Campbell, Moray; Hershberger, Pamela A., E-mail: pamela.hershberger@roswellpark.org [Department of Pharmacology and Therapeutics, Roswell Park Cancer Institute, Elm and Carlton Streets, Buffalo, NY 14263 (United States)

    2013-11-08

    1,25-dihydroxyvitamin D{sub 3} (1,25(OH){sub 2}D{sub 3}) exerts anti-proliferative activity by binding to the vitamin D receptor (VDR) and regulating gene expression. We previously reported that non-small cell lung cancer (NSCLC) cells which harbor epidermal growth factor receptor (EGFR) mutations display elevated VDR expression (VDR{sup high}) and are vitamin D-sensitive. Conversely, those with K-ras mutations are VDR{sup low} and vitamin D-refractory. Because EGFR mutations are found predominately in NSCLC cells with an epithelial phenotype and K-ras mutations are more common in cells with a mesenchymal phenotype, we investigated the relationship between vitamin D signaling capacity and the epithelial mesenchymal transition (EMT). Using NSCLC cell lines and publically available lung cancer cell line microarray data, we identified a relationship between VDR expression, 1,25(OH){sub 2}D{sub 3} sensitivity, and EMT phenotype. Further, we discovered that 1,25(OH){sub 2}D{sub 3} induces E-cadherin and decreases EMT-related molecules SNAIL, ZEB1, and vimentin in NSCLC cells. 1,25(OH){sub 2}D{sub 3}-mediated changes in gene expression are associated with a significant decrease in cell migration and maintenance of epithelial morphology. These data indicate that 1,25(OH){sub 2}D{sub 3} opposes EMT in NSCLC cells. Because EMT is associated with increased migration, invasion, and chemoresistance, our data imply that 1,25(OH){sub 2}D{sub 3} may prevent lung cancer progression in a molecularly defined subset of NSCLC patients.

  5. The Implications of 3D Thermal Structure on 1D Atmospheric Retrieval

    Energy Technology Data Exchange (ETDEWEB)

    Blecic, Jasmina; Dobbs-Dixon, Ian [NYU Abu Dhabi, Abu Dhabi (United Arab Emirates); Greene, Thomas, E-mail: jasmina@nyu.edu [NASA Ames Research Center, Space Sciece and Astrobiology Division, M.S. 245-6, Moffett Field, CA 94035 (United States)

    2017-10-20

    Using the atmospheric structure from a 3D global radiation-hydrodynamic simulation of HD 189733b and the open-source Bayesian Atmospheric Radiative Transfer (BART) code, we investigate the difference between the secondary-eclipse temperature structure produced with a 3D simulation and the best-fit 1D retrieved model. Synthetic data are generated by integrating the 3D models over the Spitzer , the Hubble Space Telescope ( HST ), and the James Web Space Telescope ( JWST ) bandpasses, covering the wavelength range between 1 and 11 μ m where most spectroscopically active species have pronounced features. Using the data from different observing instruments, we present detailed comparisons between the temperature–pressure profiles recovered by BART and those from the 3D simulations. We calculate several averages of the 3D thermal structure and explore which particular thermal profile matches the retrieved temperature structure. We implement two temperature parameterizations that are commonly used in retrieval to investigate different thermal profile shapes. To assess which part of the thermal structure is best constrained by the data, we generate contribution functions for our theoretical model and each of our retrieved models. Our conclusions are strongly affected by the spectral resolution of the instruments included, their wavelength coverage, and the number of data points combined. We also see some limitations in each of the temperature parametrizations, as they are not able to fully match the complex curvatures that are usually produced in hydrodynamic simulations. The results show that our 1D retrieval is recovering a temperature and pressure profile that most closely matches the arithmetic average of the 3D thermal structure. When we use a higher resolution, more data points, and a parametrized temperature profile that allows more flexibility in the middle part of the atmosphere, we find a better match between the retrieved temperature and pressure profile and

  6. The Implications of 3D Thermal Structure on 1D Atmospheric Retrieval

    Science.gov (United States)

    Blecic, Jasmina; Dobbs-Dixon, Ian; Greene, Thomas

    2017-10-01

    Using the atmospheric structure from a 3D global radiation-hydrodynamic simulation of HD 189733b and the open-source Bayesian Atmospheric Radiative Transfer (BART) code, we investigate the difference between the secondary-eclipse temperature structure produced with a 3D simulation and the best-fit 1D retrieved model. Synthetic data are generated by integrating the 3D models over the Spitzer, the Hubble Space Telescope (HST), and the James Web Space Telescope (JWST) bandpasses, covering the wavelength range between 1 and 11 μm where most spectroscopically active species have pronounced features. Using the data from different observing instruments, we present detailed comparisons between the temperature-pressure profiles recovered by BART and those from the 3D simulations. We calculate several averages of the 3D thermal structure and explore which particular thermal profile matches the retrieved temperature structure. We implement two temperature parameterizations that are commonly used in retrieval to investigate different thermal profile shapes. To assess which part of the thermal structure is best constrained by the data, we generate contribution functions for our theoretical model and each of our retrieved models. Our conclusions are strongly affected by the spectral resolution of the instruments included, their wavelength coverage, and the number of data points combined. We also see some limitations in each of the temperature parametrizations, as they are not able to fully match the complex curvatures that are usually produced in hydrodynamic simulations. The results show that our 1D retrieval is recovering a temperature and pressure profile that most closely matches the arithmetic average of the 3D thermal structure. When we use a higher resolution, more data points, and a parametrized temperature profile that allows more flexibility in the middle part of the atmosphere, we find a better match between the retrieved temperature and pressure profile and the

  7. 2D and 3D impellers of centrifugal compressors - advantages, shortcomings and fields of application

    Science.gov (United States)

    Galerkin, Y.; Reksrin, A.; Drozdov, A.

    2017-08-01

    The simplified equations are presented for calculation of inlet dimensions and velocity values for impellers with three-dimensional blades located in axial and radial part of an impeller (3D impeller) and with two-dimensional blades in radial part (2D). Considerations concerning loss coefficients of 3D and 2D impellers at different design flow rate coefficients are given. The tendency of reduction of potential advantages of 3D impellers at medium and small design flow rate coefficients is shown. The data on high-efficiency compressors and stages with 2D impellers coefficients designed by the authors are presented. The reached efficiency level of 88 - 90% makes further increase of efficiency by the application of 3D impellers doubtful. CFD-analysis of stage candidates with medium flow rate coefficient with 3D and 2D impellers revealed specific problems. In some cases the constructive advantage of a 2D impeller is smaller hub ratio. It makes possible the reaching of higher efficiency. From other side, there is a positive tendency of gas turbine drive RPM increase. 3D impellers have no alternative for stages with high flow rate coefficients matching high-speed drive.

  8. Modulation of renal Ca2+ transport protein genes by dietary Ca2+ and 1,25-dihydroxyvitamin D3 in 25-hydroxyvitamin D3-1alpha-hydroxylase knockout mice.

    NARCIS (Netherlands)

    Hoenderop, J.G.J.; Dardenne, O.; Abel, M. van; Kemp, J.W.C.M. van der; Os, C.H. van; Arnaud, R. St.; Bindels, R.J.M.

    2002-01-01

    Pseudovitamin D-deficiency rickets (PDDR) is an autosomal disease characterized by hyperparathyroidism, rickets, and undetectable levels of 1,25-dihydroxyvitaminD3 (1,25(OH)2D3). Mice in which the 25-hydroxyvitamin D3-1alpha-hydroxylase (1alpha-OHase) gene was inactivated presented the same clinical

  9. MERRA 2D IAU Diagnostic, Vertical Integrals and Budget Terms, Instantaneous 1-hourly (2/3x1/2L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAI1NXINT or inst1_2d_int_Nx data product is the MERRA Data Assimilation System 2-Dimensional vertical integral that is Instantaneous single-level at the native...

  10. 12 CFR 905.3 - Location and business hours.

    Science.gov (United States)

    2010-01-01

    ... Location and business hours. (a) Location. All office units of the Finance Board are located at 1777 F... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Location and business hours. 905.3 Section 905.3 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND...

  11. DELTA 3D PRINTER

    Directory of Open Access Journals (Sweden)

    ȘOVĂILĂ Florin

    2016-07-01

    Full Text Available 3D printing is a very used process in industry, the generic name being “rapid prototyping”. The essential advantage of a 3D printer is that it allows the designers to produce a prototype in a very short time, which is tested and quickly remodeled, considerably reducing the required time to get from the prototype phase to the final product. At the same time, through this technique we can achieve components with very precise forms, complex pieces that, through classical methods, could have been accomplished only in a large amount of time. In this paper, there are presented the stages of a 3D model execution, also the physical achievement after of a Delta 3D printer after the model.

  12. MERRA 2D IAU Diagnostic, Radiation Surface and TOA, Time Average 1-hourly (2/3x1/2L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT1NXRAD or tavg1_2d_rad_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface and TOA radiation flux that is time averaged single-level...

  13. N = (2,0) self-dual non-Abelian tensor multiplet in D = 3 + 3 generates N = (1,1) self-dual systems in D = 2 + 2

    Science.gov (United States)

    Nishino, Hitoshi; Rajpoot, Subhash

    2018-03-01

    We formulate an N = (2 , 0) system in D = 3 + 3 dimensions consisting of a Yang-Mills (YM)-multiplet (ˆ μ ˆ IA, λˆI), a self-dual non-Abelian tensor multiplet (ˆ μ ˆ ν ˆ IB, χˆI ,φˆI), and an extra vector multiplet (C ˆ μ ˆ IC, ρˆI). We next perform the dimensional reductions of this system into D = 2 + 2, and obtain N = (1 , 1) systems with a self-dual YM-multiplet (AIμ ,λI), a self-dual tensor multiplet (BIμν , χI , φI), and an extra vector multiplet (CIμ , ρI). In D = 2 + 2, we reach two distinct theories: 'Theory-I' and 'Theory-II'. The former has the self-dual field-strength Hμν(+)I of CIμ already presented in our recent paper, while the latter has anti-self-dual field strength Hμν(-)I. As an application, we show that Theory-II actually generates supersymmetric-KdV equations in D = 1 + 1. Our result leads to a new conclusion that the D = 3 + 3 theory with non-Abelian tensor multiplet can be a 'Grand Master Theory' for self-dual multiplet and self-dual YM-multiplet in D = 2 + 2, that in turn has been conjectured to be the 'Master Theory' for all supersymmetric integrable theories in D3.

  14. Dual-Stage Crosslinking of a Gel-Phase Bioink Improves Cell Viability and Homogeneity for 3D Bioprinting.

    Science.gov (United States)

    Dubbin, Karen; Hori, Yuki; Lewis, Kazuomori K; Heilshorn, Sarah C

    2016-10-01

    Current bioinks for cell-based 3D bioprinting are not suitable for technology scale-up due to the challenges of cell sedimentation, cell membrane damage, and cell dehydration. A novel bioink hydrogel is presented with dual-stage crosslinking specifically designed to overcome these three major hurdles. This bioink enables the direct patterning of highly viable, multicell type constructs with long-term spatial fidelity. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Feasibility and efficacy of helical intensity-modulated radiotherapy for stage III non-small cell lung cancer in comparison with conventionally fractionated 3D-CRT.

    Science.gov (United States)

    He, Jian; Huang, Yan; Chen, Yixing; Shi, Shiming; Ye, Luxi; Hu, Yong; Zhang, Jianying; Zeng, Zhaochong

    2016-05-01

    The standard treatment for stage III non-small-cell lung cancer (NSCLC) is still 60 Gy in conventional fractions combined with concurrent chemotherapy; however, the resulting local controls are disappointing. The aim of this study was to compare and assess the feasibility and efficacy of hypofractionated chemoradiotherapy using helical tomotherapy (HT) with conventional fractionation as opposed to using three-dimensional conformal radiotherapy (3D-CRT) for stage III NSCLC. Sixty-nine patients with stage III (AJCC 7th edition) NSCLC who underwent definitive radiation treatment at our institution between July 2011 and November 2013 were reviewed and analyzed retrospectively. A dose of 60 Gy in 20 fractions was delivered in the HT group (n=34), whereas 60 Gy in 30 fractions in the 3D-CRT group (n=35). Primary endpoints were toxicity, overall response rate, overall survival (OS) and progression-free survival (PFS). The median follow-up period was 26.4 months. V20 (P=0.005), V30 (P=0.001), V40 (P=0.004), mean lung dose (P=0.000) and max dose of spinal cord (P=0.005) were significantly lower in the HT group than in the 3D-CRT group. There was no significant difference in the incidences of acute radiation pneumonitis (RP) ≥ grade 2 between the two groups, whereas the incidences of acute radiation esophagitis ≥ grade 2 were significantly lower in the HT group than in the 3D-CRT group (P=0.027). Two-year overall response rate was significantly higher in the HT group than in the 3D-CRT group (P=0.015). One- and 2-year OS rates were significantly higher in the HT group (95.0% and 68.7%, respectively) than in the 3D-CRT group (85.5% and 47.6%, respectively; P=0.0236). One- and 2-year PFS rates were significantly higher in the HT group (57.8% and 26.3%, respectively) than in the 3D-CRT group (32.7% and 11.4%, respectively; P=0.0351). Univariate analysis indicated that performance status (PS), T stage and radiotherapy technique were significant prognostic factors for both OS

  16. The development of the code package PERMAK--3D//SC--1

    International Nuclear Information System (INIS)

    Bolobov, P. A.; Oleksuk, D. A.

    2011-01-01

    Code package PERMAK-3D//SC-1 was developed for performing pin-by-pin coupled neutronic and thermal hydraulic calculation of the core fragment of seven fuel assemblies and was designed on the basis of 3D multigroup pin-by-pin code PERMAK-3D and 3D (subchannel) thermal hydraulic code SC-1 The code package predicts axial and radial pin-by-pin power distribution and coolant parameters in stimulated region (enthalpies,, velocities,, void fractions,, boiling and DNBR margins).. The report describes some new steps in code package development. Some PERMAK-3D//SC-1 outcomes of WWER calculations are presented in the report. (Authors)

  17. Fully digital 1-D, 2-D and 3-D multiscroll chaos as hardware pseudo random number generators

    KAUST Repository

    Mansingka, Abhinav S.; Radwan, Ahmed Gomaa; Salama, Khaled N.

    2012-01-01

    This paper introduces the first fully digital implementation of 1-D, 2-D and 3-D multiscroll chaos using the sawtooth nonlinearity in a 3rd order ODE with the Euler approximation. Systems indicate chaotic behaviour through phase space boundedness

  18. Performance comparison of 2-1-3, 1-3 and 1-3-2 piezoelectric composite transducers by finite element method

    Directory of Open Access Journals (Sweden)

    Y. Sun

    2018-03-01

    Full Text Available 1-3 type, 1-3-2 type and 2-1-3 type piezoelectric composites are three proper smart materials for the design and manufacture of ultrasonic transducers. They have been proposed in different stages but possess similar properties. Compared with the initial 1-3 type composite, 1-3-2 composite is of higher mechanical stability. Compared with 1-3-2 composite, 2-1-3 composite has lower manufacturing difficulty. In this paper, a comparative study on these three composites in terms of receiving transducer material properties is presented. Finite element method (FEM has been adopted to calculate longitudinal velocity, thickness electromechanical coupling coefficient and voltage receiving sensitivity. It is concluded that for a large aspect ratio α=1, the performance of 2-1-3 composite transducer is much better than that of 1-3 and 1-3-2 composite transducers. The thickness electromechanical coupling coefficient of 2-1-3 composite transducer is about 5.58 times that of 1-3 composite transducer and 7.42 times that of 1-3-2 composite transducer. The voltage receiving sensitivity at 2 kHz of 2-1-3 composite transducer is 13.1 dB higher than that of 1-3-2 composite transducer and 12.3 dB higher than that of 1-3 composite transducer.

  19. Microscopic calculation of the molecular-nuclear D+D → sup(3)He+n and D+D → sup(3)H+p reactions at close to zero energies

    International Nuclear Information System (INIS)

    Frederico, T.; Groote, J.J. de; Hornos, J.E.; Hussein, M.S.

    1990-11-01

    Microscopic calculations of the astrophysically interesting reactions D+D→sup(3)He+n and D+D→sup(3)H+p are performed using nuclear reaction theory and Born-Oppenheimer type molecular calculation of the D+D initial stage. The sensitivity of the fusion rate to the behaviour of the D+D wave function at close to zero separation is assessed. Relevance of the results to the cold fusion problem is discussed. (author)

  20. An efficient synthesis of 1α,25-dihydroxyvitamin D3 LC-biotin.

    Science.gov (United States)

    Kattner, Lars; Bernardi, Dan

    2017-10-01

    In recent years the apparent impact of vitamin D deficiency on human health has gained increased awareness. Consequently, the development of appropriate assays to measure the status of medicinally most relevant vitamin D metabolites in human blood, serum or relevant tissue is continuously being improved. Particularly, assaying of 1α,25-dihydroxyvitamin D 3 , in turn considered as the most active metabolite, is mainly indicated in disorders leading to calcaemia or those resulting from an impaired 1α-hydroxylation of 25-hydroxyvitamin D 3 . Thus, in some competitive protein binding and ELISA assays, biotin-linked 1α,25-dihydroxyvitamin D 3 (1α,25-dihydroxyvitamin D 3 LC-biotin) is employed for measurement of actual calicitriol concentration. A new efficient synthesis of 1α,25-dihydroxyvitamin D 3 LC-biotin is described, starting with readily available vitamin D 2 , and combining a classical approach to access 1α,25-dihydroxyvitamin D 3 , appropriate OH-protective group transformations, and a C-3-O-alkylation, suitable to connect the biotin-linker in a reliable, selective and high yielding strategy. The developed methodology is applicable to the synthesis of a wide variety of C-3-OH-linked vitamin D 3 and D 2 derivatives. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Variable flip angle 3D ultrashort echo time (UTE) T1 mapping of mouse lung: A repeatability assessment.

    Science.gov (United States)

    Alamidi, Daniel F; Smailagic, Amir; Bidar, Abdel W; Parker, Nicole S; Olsson, Marita; Hockings, Paul D; Lagerstrand, Kerstin M; Olsson, Lars E

    2018-03-08

    Lung T 1 is a potential translational biomarker of lung disease. The precision and repeatability of variable flip angle (VFA) T 1 mapping using modern 3D ultrashort echo time (UTE) imaging of the whole lung needs to be established before it can be used to assess response to disease and therapy. To evaluate the feasibility of regional lung T 1 quantification with VFA 3D-UTE and to investigate long- and short-term T 1 repeatability in the lungs of naive mice. Prospective preclinical animal study. Eight naive mice and phantoms. 3D free-breathing radial UTE (8 μs) at 4.7T. VFA 3D-UTE T 1 calculations were validated against T 1 values measured with inversion recovery (IR) in phantoms. Lung T 1 and proton density (S 0 ) measurements of whole lung and muscle were repeated five times over 1 month in free-breathing naive mice. Two consecutive T 1 measurements were performed during one of the imaging sessions. Agreement in T 1 between VFA 3D-UTE and IR in phantoms was assessed using Bland-Altman and Pearson 's correlation analysis. The T 1 repeatability in mice was evaluated using coefficient of variation (CV), repeated-measures analysis of variance (ANOVA), and paired t-test. Good T 1 agreement between the VFA 3D-UTE and IR methods was found in phantoms. T 1 in lung and muscle showed a 5% and 3% CV (1255 ± 63 msec and 1432 ± 42 msec, respectively, mean ± SD) with no changes in T 1 or S 0 over a month. Consecutive measurements resulted in an increase of 2% in both lung T 1 and S 0 . VFA 3D-UTE shows promise as a reliable T 1 mapping method that enables full lung coverage, high signal-to-noise ratio (∼25), and spatial resolution (300 μm) in freely breathing animals. The precision of the VFA 3D-UTE method will enable better design and powering of studies. 1 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018. © 2018 International Society for Magnetic Resonance in Medicine.

  2. [Changes in mineral metabolism in stage 3, 4, and 5 chronic kidney disease (not on dialysis)].

    Science.gov (United States)

    Lorenzo Sellares, V; Torregrosa, V

    2008-01-01

    measured with the Allegro assay from Nichols Institute Diagnostics, no longer available). Various assays are currently available that use antibodies against different fragments of the molecule, but they have significant intermethod variability and have not been validated. A whole PT assay (1-84) is currently unavailable. A consensus to establish uniform criteria for PTH measurement remains to be established. During the dose titration stages of intestinal phosphorus binders, vitamin D analogs or calcimimetics, more frequent measurement may be required based on clinical judgment. Calcifediol (25(OH)D3) It is important to maintain adequate levels of 25(OH)D3 (> 30 ng/mL), since they will be the substrate for production of 1- 25(OH)2 D3, and their deficiency aggravates hyperthyroidism. Determining 25(OH)D3 levels every 6-12 months is a recommended guideline. Other markers of bone turnover (osteocalcin, total and bone alkaline phosphate, free pyridolines in serum, and C-terminal telopeptide of collagen) do not improve the predictive power of PTH and therefore their systematic use is not justified. Radiologic studies Radiologic studies are of little diagnostic utility, because biochemical changes precede radiologic changes. Systematic radiologic evaluation of the skeleton in asymptomatic patients is not justified at present. They are useful as the first step in the study to detect vascular calcifications and amyloidosis due to b2-microglobulin and in symptomatic and at risk patients to detect vertebral fractures. Bone densitometry: Dual energy x-ray absorptiometry (DEXA) is the standard method to determine bone mineral density (usually in the femoral neck and vertebrae). It provides information on changes in bone mineral content, but not on the type of underlying bone disease. It is useful for follow-up of bone mass or for the study of bone mass changes in the same patient. Its value as a predictor of the risk of fracture has not been demonstrated in patients on kidney

  3. Preoperative evaluation of renal anatomy and renal masses with helical CT, 3D-CT and 3D-CT angiography.

    Science.gov (United States)

    Toprak, Uğur; Erdoğan, Aysun; Gülbay, Mutlu; Karademir, Mehmet Alp; Paşaoğlu, Eşref; Akar, Okkeş Emrah

    2005-03-01

    The aim of this prospective study was to determine the efficacy of three-dimensional computed tomography (3D-CT) and three-dimensional computed tomographic angiography (3D-CTA) that were reconstructed by using the axial images of the multiphasic helical CT in the preoperative evaluation of renal masses and demonstration of renal anatomy. Twenty patients that were suspected of having renal masses upon initial physical examination and ultrasonographic evaluation were examined through multiphasic helical CT. Two authors executed CT evaluations. Axial images were first examined and then used to reconstruct 3D-CT and 3D- CTA images. Number, location and size of the renal masses and other findings were noted. Renal vascularization and relationships of the renal masses with the neighboring renal structures were further investigated with 3D-CT and 3D-CTA images. Out of 20 patients, 13 had histopathologically proven renal cell carcinoma. The diagnoses of the remaining seven patients were xanthogranulomatous pyelonephritis, abscess, simple cyst, infected cyst, angiomyolipoma, oncocytoma and arteriovenous fistula. In the renal cell carcinoma group, 3 patients had stage I, 7 patients had stage II, and 3 patients had stage III disease. Sizes of renal cell carcinoma masses were between 23 mm to 60 mm (mean, 36 mm). Vascular invasion was shown in 2 renal cell carcinoma patients. Collecting system invasion was identified in 11 of 13 renal cell patients. These radiologic findings were confirmed with surgical specimens. Three-dimensional CT and 3D-CTA are non-invasive, effective imaging techniques for the preoperative evaluation of renal masses.

  4. 5-Isopropylidene-1,3-dithiolo[4,5-d][1,3]dithiole-2-thione

    Directory of Open Access Journals (Sweden)

    Yoshiro Yamashita

    2009-05-01

    Full Text Available The title compound, C7H6S5, contains a 5-ylidene-1,3-dithiolo[4,5-d][1,3]dithiole-2-thione framework, which is an important synthetic precursor of multi-dimensional organic superconductors and conductors. The molecular framework is planar with an r.m.s. deviation of 0.012 Å for the non-H atoms. In the crystal structure, molecules are linked by short intermolecular S...S interactions [3.501 (5 and 3.581 (4 Å], constructing a zigzag molecular tape network along the c axis.

  5. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2 and 118-H-3 Solid Waste Burial Grounds

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Vialetti

    2008-05-20

    This report presents the final hazard categorization for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site.

  6. A 3d-3d appetizer

    Energy Technology Data Exchange (ETDEWEB)

    Pei, Du; Ye, Ke [Walter Burke Institute for Theoretical Physics, California Institute of Technology, Pasadena, CA, 91125 (United States)

    2016-11-02

    We test the 3d-3d correspondence for theories that are labeled by Lens spaces. We find a full agreement between the index of the 3d N=2 “Lens space theory” T[L(p,1)] and the partition function of complex Chern-Simons theory on L(p,1). In particular, for p=1, we show how the familiar S{sup 3} partition function of Chern-Simons theory arises from the index of a free theory. For large p, we find that the index of T[L(p,1)] becomes a constant independent of p. In addition, we study T[L(p,1)] on the squashed three-sphere S{sub b}{sup 3}. This enables us to see clearly, at the level of partition function, to what extent G{sub ℂ} complex Chern-Simons theory can be thought of as two copies of Chern-Simons theory with compact gauge group G.

  7. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2, and 118-H-3 Solid Waste Burial Grounds

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Ludowise

    2009-06-17

    This report presents the final hazard categorization for the remediation of the 118-D-1, 118-D-2, 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site. A material at risk calculation was performed that determined the radiological inventory for each burial ground to be Hazard Category 3.

  8. Fully digital 1-D, 2-D and 3-D multiscroll chaos as hardware pseudo random number generators

    KAUST Repository

    Mansingka, Abhinav S.

    2012-10-07

    This paper introduces the first fully digital implementation of 1-D, 2-D and 3-D multiscroll chaos using the sawtooth nonlinearity in a 3rd order ODE with the Euler approximation. Systems indicate chaotic behaviour through phase space boundedness and positive Lyapunov exponent. Low-significance bits form a PRNG and pass all tests in the NIST SP. 800-22 suite without post-processing. Real-time control of the number of scrolls allows distinct output streams with 2-D and 3-D multiscroll chaos enabling greater controllability. The proposed PRNGs are experimentally verified on a Xilinx Virtex 4 FPGA with logic utilization less than 1.25%, throughput up to 5.25 Gbits/s and up to 512 distinct output streams with low cross-correlation.

  9. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2, and 118-H-3 Solid Waste Burial Grounds

    International Nuclear Information System (INIS)

    Rodovsky, T.J.

    2006-01-01

    This report presents the final hazard categorization (FHC) for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site

  10. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2, and 118-H-3 Solid Waste Burial Grounds

    Energy Technology Data Exchange (ETDEWEB)

    T. J. Rodovsky

    2006-12-06

    This report presents the final hazard categorization (FHC) for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site.

  11. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2, and 118-H-3 Solid Waste Burial Grounds

    Energy Technology Data Exchange (ETDEWEB)

    T. J. Rodovsky

    2007-04-12

    This report presents the final hazard categorization (FHC) for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site.

  12. Final Hazard Categorization for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2, and 118-H-3 Solid Waste Burial Grounds

    International Nuclear Information System (INIS)

    TRodovsky, T.J.

    2007-01-01

    This report presents the final hazard categorization (FHC) for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site

  13. Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter.

    Science.gov (United States)

    Rao, Chengchen; Gu, Fu; Zhao, Peng; Sharmin, Nusrat; Gu, Haibing; Fu, Jianzhong

    2017-09-04

    This study investigated the feasibility of using polycaprolactone (PCL) nanofiber-based air filters to capture PM2.5 particles emitted from fused deposition modeling (FDM) 3D printing. Generation and aggregation of emitted particles were investigated under different testing environments. The results show that: (1) the PCL nanofiber membranes are capable of capturing particle emissions from 3D printing, (2) relative humidity plays a signification role in aggregation of the captured particles, (3) generation and aggregation of particles from 3D printing can be divided into four stages: the PM2.5 concentration and particles size increase slowly (first stage), small particles are continuously generated and their concentration increases rapidly (second stage), small particles aggregate into more large particles and the growth of concentration slows down (third stage), the PM2.5 concentration and particle aggregation sizes increase rapidly (fourth stage), and (4) the ultrafine particles denoted as "building unit" act as the fundamentals of the aggregated particles. This work has tremendous implications in providing measures for controlling the particle emissions from 3D printing, which would facilitate the extensive application of 3D printing. In addition, this study provides a potential application scenario for nanofiber-based air filters other than laboratory theoretical investigation.

  14. (3,2)D GFT-NMR experiments for fast data collection from proteins

    International Nuclear Information System (INIS)

    Xia Youlin; Zhu Guang; Veeraraghavan, Sudha; Gao Xiaolian

    2004-01-01

    High throughput structure determination of proteins will contribute to the success of proteomics investigations. The G-Matrix Fourier Transformation NMR (GFT-NMR) method significantly shortens experimental time by reducing the number of the dimensions of data acquisition for isotopically labeled proteins (Kim, S. and Szyperski, T. (2003) J. Am. Chem. Soc.125, 1385). We demonstrate herein a suite of ten 3D → 2D or (3,2)D GFT-NMR experiments using 13 C/ 15 N-labeled ubiquitin. These experiments were completed within 18 hours, representing a 4- to 18-fold reduction in data acquisition time compared to the corresponding conventional 3D experiments. A subset of the GFT-NMR experiments, (3,2)D HNCO, HNCACB, HN(CO)CACB, and 2D 1 H- 15 N HSQC, which are necessary for backbone assignments, were carried out within 6 hours. To facilitate the analysis of the GFT-NMR spectra, we developed automated procedures for viewing and analyzing the GFT-NMR spectra. Our overall strategy allows (3,2)D GFT-NMR experiments to be readily performed and analyzed. Nevertheless, the increase in spectral overlap and the reduction in signal sensitivity in these fast NMR experiments presently limit their application to relatively small proteins

  15. 3D molecular descriptors important for clinical success.

    Science.gov (United States)

    Kombo, David C; Tallapragada, Kartik; Jain, Rachit; Chewning, Joseph; Mazurov, Anatoly A; Speake, Jason D; Hauser, Terry A; Toler, Steve

    2013-02-25

    The pharmacokinetic and safety profiles of clinical drug candidates are greatly influenced by their requisite physicochemical properties. In particular, it has been shown that 2D molecular descriptors such as fraction of Sp3 carbon atoms (Fsp3) and number of stereo centers correlate with clinical success. Using the proteomic off-target hit rate of nicotinic ligands, we found that shape-based 3D descriptors such as the radius of gyration and shadow indices discriminate off-target promiscuity better than do Fsp3 and the number of stereo centers. We have deduced the relevant descriptor values required for a ligand to be nonpromiscuous. Investigating the MDL Drug Data Report (MDDR) database as compounds move from the preclinical stage toward the market, we have found that these shape-based 3D descriptors predict clinical success of compounds at preclinical and phase1 stages vs compounds withdrawn from the market better than do Fsp3 and LogD. Further, these computed 3D molecular descriptors correlate well with experimentally observed solubility, which is among well-known physicochemical properties that drive clinical success. We also found that about 84% of launched drugs satisfy either Shadow index or Fsp3 criteria, whereas withdrawn and discontinued compounds fail to meet the same criteria. Our studies suggest that spherical compounds (rather than their elongated counterparts) with a minimal number of aromatic rings may exhibit a high propensity to advance from clinical trials to market.

  16. Comparison and analysis of 1D/2D/3D neutronics modeling for a fusion reactor

    International Nuclear Information System (INIS)

    Li, J.; Zeng, Q.; Chen, M.; Jiang, J.; Wu, Y.

    2007-01-01

    During the course of analyzing the characteristics for fusion reactors, the refined calculations are needed to confirm that the nuclear design requirements are met. Since the long computational time is consumed, the refined three-dimensional (3D) representation has been used primarily for establishing the baseline reference values, analyzing problems which cannot be reduced by symmetry considerations to lower dimensions, or where a high level of accuracy is desired locally. The two-dimensional (2D) or one-dimensional (1D) description leads itself readily to resolve many problems, such as the studies for the material fraction optimization, or for the blanket size optimization. The purpose of this paper is to find out the differences among different geometric descriptions, which can guide the way to approximate and simplify the computational model. The fusion power reactor named FDS-II was designed as an advanced fusion power reactor to demonstrate and validate the commercialization of fusion power by Institute of Plasma Physics, Chinese Academy of Science. In this contribution, the dual-cooled lithium lead (DLL) blanket of FDS-II was used as a reference for neutronics comparisons and analyses. The geometric descriptions include 1D concentric sphere model, 1D, 2D and 3D cylinder models. The home-developed multi-functional neutronics analysis code system VisualBUS, the Monte Carlo transport code MCNP and nuclear data library HENDL have been used for these analyses. The neutron wall loading distribution, tritium breeding ratio (TBR) and nuclear heat were calculated to evaluate the nuclear performance. The 3D calculation has been used as a comparison reference because it has the least errors in the treatment of geometry. It is suggested that the value of TBR calculated by the 1D approach should be greater than 1.3 to satisfy the practical need of tritium self-sufficiency. The distribution of nuclear heat based on the 2D and 3D models were similar since they all consider

  17. Transcriptional effects of 1,25 dihydroxyvitamin D{sub 3} physiological and supra-physiological concentrations in breast cancer organotypic culture

    Energy Technology Data Exchange (ETDEWEB)

    Milani, Cintia [Disciplina de Oncologia, LIM24, Departamento de Radiologia e Oncologia, Faculdade de Medicina da Universidade de São Paulo, Av. Dr. Arnaldo 455,Sala 4124, São Paulo, SP, 01246-903 (Brazil); Góes, João Carlos Guedes Sampaio [Instituto Brasileiro de Controle do Câncer, IBCC, São Paulo (Brazil); Nonogaki, Suely [Instituto Adolfo Lutz, Centro de Patologia, Núcleo de Patologia Quantitativa, São Paulo (Brazil); Tamura, Rodrigo Esaki [Post-doctoral fellow, Viral Vectors Laboratory, Instituto do Câncer do Estado de São Paulo, ICESP, São Paulo (Brazil); Folgueira, Maria Aparecida Azevedo Koike; Katayama, Maria Lucia Hirata [Disciplina de Oncologia, LIM24, Departamento de Radiologia e Oncologia, Faculdade de Medicina da Universidade de São Paulo, Av. Dr. Arnaldo 455,Sala 4124, São Paulo, SP, 01246-903 (Brazil); Lyra, Eduardo Carneiro de [Disciplina de Oncologia, LIM24, Departamento de Radiologia e Oncologia, Faculdade de Medicina da Universidade de São Paulo, Av. Dr. Arnaldo 455,Sala 4124, São Paulo, SP, 01246-903 (Brazil); Instituto Brasileiro de Controle do Câncer, IBCC, São Paulo (Brazil); Welsh, JoEllen [Department of Environmental Health Sciences, School of Public Health, University at Albany, Rensselaer, NY, 12144 (United States); Campos, Laura Tojeiro; Brentani, M Mitzi [Disciplina de Oncologia, LIM24, Departamento de Radiologia e Oncologia, Faculdade de Medicina da Universidade de São Paulo, Av. Dr. Arnaldo 455,Sala 4124, São Paulo, SP, 01246-903 (Brazil); Maciel, Maria do Socorro [Hospital do Câncer A. C. Camargo, São Paulo (Brazil); Roela, Rosimeire Aparecida; Valle, Paulo Roberto del [Disciplina de Oncologia, LIM24, Departamento de Radiologia e Oncologia, Faculdade de Medicina da Universidade de São Paulo, Av. Dr. Arnaldo 455,Sala 4124, São Paulo, SP, 01246-903 (Brazil)

    2013-03-15

    Vitamin D transcriptional effects were linked to tumor growth control, however, the hormone targets were determined in cell cultures exposed to supra physiological concentrations of 1,25(OH){sub 2}D{sub 3} (50-100nM). Our aim was to evaluate the transcriptional effects of 1,25(OH){sub 2}D{sub 3} in a more physiological model of breast cancer, consisting of fresh tumor slices exposed to 1,25(OH){sub 2}D{sub 3} at concentrations that can be attained in vivo. Tumor samples from post-menopausal breast cancer patients were sliced and cultured for 24 hours with or without 1,25(OH){sub 2}D{sub 3} 0.5nM or 100nM. Gene expression was analyzed by microarray (SAM paired analysis, FDR≤0.1) or RT-qPCR (p≤0.05, Friedman/Wilcoxon test). Expression of candidate genes was then evaluated in mammary epithelial/breast cancer lineages and cancer associated fibroblasts (CAFs), exposed or not to 1,25(OH){sub 2}D{sub 3} 0.5nM, using RT-qPCR, western blot or immunocytochemistry. 1,25(OH){sub 2}D{sub 3} 0.5nM or 100nM effects were evaluated in five tumor samples by microarray and seven and 136 genes, respectively, were up-regulated. There was an enrichment of genes containing transcription factor binding sites for the vitamin D receptor (VDR) in samples exposed to 1,25(OH){sub 2}D{sub 3} near physiological concentration. Genes up-modulated by both 1,25(OH){sub 2}D{sub 3} concentrations were CYP24A1, DPP4, CA2, EFTUD1, TKTL1, KCNK3. Expression of candidate genes was subsequently evaluated in another 16 samples by RT-qPCR and up-regulation of CYP24A1, DPP4 and CA2 by 1,25(OH){sub 2}D{sub 3} was confirmed. To evaluate whether the transcripitonal targets of 1,25(OH){sub 2}D{sub 3} 0.5nM were restricted to the epithelial or stromal compartments, gene expression was examined in HB4A, C5.4, SKBR3, MDA-MB231, MCF-7 lineages and CAFs, using RT-qPCR. In epithelial cells, there was a clear induction of CYP24A1, CA2, CD14 and IL1RL1. In fibroblasts, in addition to CYP24A1 induction, there was a

  18. Effect of 1,24R-dihydroxyvitamin D3 on the growth of human keratinocytes.

    LENUS (Irish Health Repository)

    Matsumoto, K

    1990-02-01

    The effect of 1,24R-dihydroxyvitamin D3 (1,24R(OH)2D3), a synthetic analogue of a biologically active form of vitamin D3 (1,25-dihydroxyvitamin D3, 1,25(OH)2D3), on the growth of human keratinocytes cultured in serum-free medium was investigated. The growth of cultured normal human keratinocytes was inhibited by 65% by 10(-8)M 1,24R(OH)2D3 and by 90% by 10(-7)M 1,24(OH)2D3. It inhibited cell growth almost completely at 10(-6)M. The DNA synthesis of keratinocytes was also inhibited with 1,24R(OH)2D3 by 27% at 10(-8)M, 59% at 10(-7)M, and 92% at 10(-6)M. The inhibition of cell growth and DNA synthesis were more remarkable by 1,24R(OH)2D3 than by 1,25(OH)2D3. 1,24R(OH)2D3 also inhibited the growth of keratinocytes derived from patients with psoriasis vulgaris; the growth inhibitory effect was again more remarkable with 1,24R(OH)2D3 than with 1,25(OH)2D3. The viability and protein synthesis of keratinocytes were not affected by 1,24R(OH)2D3, suggesting that the growth inhibitory effect is due to its biological activity, not to cytotoxicity. The binding of [3H]-labeled 1,25(OH)2D3 to its receptor in the cytosolic fraction of cultured keratinocytes was competitively substituted by unlabeled 1,24R(OH)2D3 as well as 1,25(OH)2D3, suggesting that 1,24R(OH)2D3 binds to the 1,25(OH)2D3 receptor. It was found that the affinity of 1,24R(OH)2D3 for the receptor was slightly higher than that of 1,25(OH)2D3. These results demonstrate that 1,24R(OH)2D3 functions as a potent growth inhibitor in vitro in human keratinocytes from both normal and psoriatic epidermis, and it possesses a higher affinity for the 1,25(OH)2D3 receptor in cultured human keratinocytes. The difference in affinity of 1,24R(OH)2D3 for the 1,25(OH)2D3 receptor correlates with its greater inhibition of keratinocyte growth than 1,25(OH)2D3. 1,24R(OH)2D3 may be useful in the treatment of psoriasis.

  19. Functional selectivity of allosteric interactions within G protein-coupled receptor oligomers: the dopamine D1-D3 receptor heterotetramer.

    Science.gov (United States)

    Guitart, Xavier; Navarro, Gemma; Moreno, Estefania; Yano, Hideaki; Cai, Ning-Sheng; Sánchez-Soto, Marta; Kumar-Barodia, Sandeep; Naidu, Yamini T; Mallol, Josefa; Cortés, Antoni; Lluís, Carme; Canela, Enric I; Casadó, Vicent; McCormick, Peter J; Ferré, Sergi

    2014-10-01

    The dopamine D1 receptor-D3 receptor (D1R-D3R) heteromer is being considered as a potential therapeutic target for neuropsychiatric disorders. Previous studies suggested that this heteromer could be involved in the ability of D3R agonists to potentiate locomotor activation induced by D1R agonists. It has also been postulated that its overexpression plays a role in L-dopa-induced dyskinesia and in drug addiction. However, little is known about its biochemical properties. By combining bioluminescence resonance energy transfer, bimolecular complementation techniques, and cell-signaling experiments in transfected cells, evidence was obtained for a tetrameric stoichiometry of the D1R-D3R heteromer, constituted by two interacting D1R and D3R homodimers coupled to Gs and Gi proteins, respectively. Coactivation of both receptors led to the canonical negative interaction at the level of adenylyl cyclase signaling, to a strong recruitment of β-arrestin-1, and to a positive cross talk of D1R and D3R agonists at the level of mitogen-activated protein kinase (MAPK) signaling. Furthermore, D1R or D3R antagonists counteracted β-arrestin-1 recruitment and MAPK activation induced by D3R and D1R agonists, respectively (cross-antagonism). Positive cross talk and cross-antagonism at the MAPK level were counteracted by specific synthetic peptides with amino acid sequences corresponding to D1R transmembrane (TM) domains TM5 and TM6, which also selectively modified the quaternary structure of the D1R-D3R heteromer, as demonstrated by complementation of hemiproteins of yellow fluorescence protein fused to D1R and D3R. These results demonstrate functional selectivity of allosteric modulations within the D1R-D3R heteromer, which can be involved with the reported behavioral synergism of D1R and D3R agonists. U.S. Government work not protected by U.S. copyright.

  20. Functional Selectivity of Allosteric Interactions within G Protein–Coupled Receptor Oligomers: The Dopamine D1-D3 Receptor Heterotetramer

    Science.gov (United States)

    Guitart, Xavier; Navarro, Gemma; Moreno, Estefania; Yano, Hideaki; Cai, Ning-Sheng; Sánchez-Soto, Marta; Kumar-Barodia, Sandeep; Naidu, Yamini T.; Mallol, Josefa; Cortés, Antoni; Lluís, Carme; Canela, Enric I.; Casadó, Vicent; McCormick, Peter J.

    2014-01-01

    The dopamine D1 receptor–D3 receptor (D1R-D3R) heteromer is being considered as a potential therapeutic target for neuropsychiatric disorders. Previous studies suggested that this heteromer could be involved in the ability of D3R agonists to potentiate locomotor activation induced by D1R agonists. It has also been postulated that its overexpression plays a role in L-dopa–induced dyskinesia and in drug addiction. However, little is known about its biochemical properties. By combining bioluminescence resonance energy transfer, bimolecular complementation techniques, and cell-signaling experiments in transfected cells, evidence was obtained for a tetrameric stoichiometry of the D1R–D3R heteromer, constituted by two interacting D1R and D3R homodimers coupled to Gs and Gi proteins, respectively. Coactivation of both receptors led to the canonical negative interaction at the level of adenylyl cyclase signaling, to a strong recruitment of β-arrestin-1, and to a positive cross talk of D1R and D3R agonists at the level of mitogen-activated protein kinase (MAPK) signaling. Furthermore, D1R or D3R antagonists counteracted β-arrestin-1 recruitment and MAPK activation induced by D3R and D1R agonists, respectively (cross-antagonism). Positive cross talk and cross-antagonism at the MAPK level were counteracted by specific synthetic peptides with amino acid sequences corresponding to D1R transmembrane (TM) domains TM5 and TM6, which also selectively modified the quaternary structure of the D1R-D3R heteromer, as demonstrated by complementation of hemiproteins of yellow fluorescence protein fused to D1R and D3R. These results demonstrate functional selectivity of allosteric modulations within the D1R-D3R heteromer, which can be involved with the reported behavioral synergism of D1R and D3R agonists. PMID:25097189

  1. Data of evolutionary structure change: 1ONAD-2D3RD [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3RD 1ONA 2D3R D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLK------TNALHFMFNQFSKDQKDLILQGDAT...n> 1ONA D 1ONAD TRVS

  2. 25-hydroxyvitamin D3 and 1,25-dihydroxyvitamin D3 exert distinct effects on human skeletal muscle function and gene expression.

    Directory of Open Access Journals (Sweden)

    Zaki K Hassan-Smith

    Full Text Available Age-associated decline in muscle function represents a significant public health burden. Vitamin D-deficiency is also prevalent in aging subjects, and has been linked to loss of muscle mass and strength (sarcopenia, but the precise role of specific vitamin D metabolites in determining muscle phenotype and function is still unclear. To address this we quantified serum concentrations of multiple vitamin D metabolites, and assessed the impact of these metabolites on body composition/muscle function parameters, and muscle biopsy gene expression in a retrospective study of a cohort of healthy volunteers. Active serum 1,25-dihydroxyvitamin D3 (1α,25(OH2D3, but not inactive 25-hydroxyvitamin D3 (25OHD3, correlated positively with measures of lower limb strength including power (rho = 0.42, p = 0.02, velocity (Vmax, rho = 0.40, p = 0.02 and jump height (rho = 0.36, p = 0.04. Lean mass correlated positively with 1α,25(OH2D3 (rho = 0.47, p = 0.02, in women. Serum 25OHD3 and inactive 24,25-dihydroxyvitamin D3 (24,25(OH2D3 had an inverse relationship with body fat (rho = -0.30, p = 0.02 and rho = -0.33, p = 0.01, respectively. Serum 25OHD3 and 24,25(OH2D3 were also correlated with urinary steroid metabolites, suggesting a link with glucocorticoid metabolism. PCR array analysis of 92 muscle genes identified vitamin D receptor (VDR mRNA in all muscle biopsies, with this expression being negatively correlated with serum 25OHD3, and Vmax, and positively correlated with fat mass. Of the other 91 muscle genes analysed by PCR array, 24 were positively correlated with 25OHD3, but only 4 were correlated with active 1α,25(OH2D3. These data show that although 25OHD3 has potent actions on muscle gene expression, the circulating concentrations of this metabolite are more closely linked to body fat mass, suggesting that 25OHD3 can influence muscle function via indirect effects on adipose tissue. By contrast, serum 1α,25(OH2D3 has limited effects on muscle gene

  3. Data of evolutionary structure change: 1ONAD-2D3PD [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3PD 1ONA 2D3P D D ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT.../entryChain> 1ONA D 1ONAD

  4. Suppression of epithelial ovarian cancer invasion into the omentum by 1α,25-dihydroxyvitamin D3 and its receptor.

    Science.gov (United States)

    Lungchukiet, Panida; Sun, Yuefeng; Kasiappan, Ravi; Quarni, Waise; Nicosia, Santo V; Zhang, Xiaohong; Bai, Wenlong

    2015-04-01

    Epithelial ovarian cancer (EOC) is the leading cause of gynecological cancer death in women, mainly because it has spread to intraperitoneal tissues such as the omentum in the peritoneal cavity by the time of diagnosis. In the present study, we established in vitro assays, ex vivo omental organ culture system and syngeneic animal tumor models using wild type (WT) and vitamin D receptor (VDR) null mice to investigate the effects of 1α,25-dihydroxyvitamin D3 (1,25D3) and VDR on EOC invasion. Treatment of human EOC cells with 1,25D3 suppressed their migration and invasion in monolayer scratch and transwell assays and ability to colonize the omentum in the ex vivo system, supporting a role for epithelial VDR in interfering with EOC invasion. Furthermore, VDR knockdown in OVCAR3 cells increased their ability to colonize the omentum in the ex vivo system in the absence of 1,25D3, showing a potential ligand-independent suppression of EOC invasion by epithelial VDR. In syngeneic models, ID8 tumors exhibited an increased ability to colonize omenta of VDR null over that of WT mice; pre-treatment of WT, not VDR null, mice with EB1089 reduced ID8 colonization, revealing a role for stromal VDR in suppressing EOC invasion. These studies are the first to demonstrate a role for epithelial and stromal VDR in mediating the activity of 1,25D3 as well as a 1,25D3-independent action of the VDR in suppressing EOC invasion. The data suggest that VDR-based drug discovery may lead to the development of new intervention strategies to improve the survival of patients with EOC at advanced stages. This article is part of a Special Issue entitled "Vitamin D Workshop". Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Amine-controlled assembly of metal-sulfite architecture from 1D chains to 3D framework.

    Science.gov (United States)

    Austria, Cristina; Zhang, Jian; Valle, Henry; Zhang, Qichun; Chew, Emily; Nguyen, Dan-Tam; Gu, J Y; Feng, Pingyun; Bu, Xianhui

    2007-08-06

    Whereas open-framework materials have been made in a variety of chemical compositions, few are known in which 3-connected SO3(2)- anions serve as basic building units. Here, we report four new metal-sulfite polymeric structures, (ZnSO3)Py (1, py = pyridine), (ZnSO3)2(2,2'-bipy)H2O (2, 2,2'-bipy = 2,2'-bipyridine), (ZnSO3)2(TMDPy) (3, TMDPy = 4,4'-trimethylenedipyridine), and (MnSO3)2en (4, en = ethylenediamine) that have been synthesized hydrothermally and structurally characterized. In these compounds, low-dimensional 1D and 2D inorganic subunits are assembled into higher 2D or 3D covalent frameworks by organic ligands. In addition to the structure-directing effect of organic ligands, the flexible coordination chemistry of Zn2+ and SO3(2)- also contributes to the observed structural diversity. In compounds 1-3, Zn2+ sites alternate with trigonal pyramidal SO3(2)- anions to form three types of [ZnSO3]n chains, whereas in compound 4, a 2D-corrugated [MnSO3]n layer is present. Compound 1 features a rail-like chain with pendant pyridine rings. The pi-pi interaction between 2,2'-bipy ligands is found between adjacent chains in compound 2, resulting in 2D sheets that are further stacked through interlayer hydrogen bonds. Compound 3 exhibits a very interesting inorganic [(ZnSO3)2]n chain constructed from two chairlike subunits, and such chains are bridged by TMDPy ligands into a 2D sheet. In compound 4, side-by-side helical chains permeate through 2D-corrugated [MnSO3]n layers, which are pillared by neutral ethylenediamine molecules into a 3D framework that can be topologically represented as a (3,6)-connected net. The results presented here illustrate the rich structural chemistry of metal-sulfites and the potential of sulfite anions as a unique structural building block for the construction of novel open-framework materials, in particular, those containing polymeric inorganic subunits that may have interesting physical properties such as low-dimensional magnetism or

  6. MERRA 2D IAU Diagnostic, Land Only States and Diagnostics, Time Average 1-hourly (2/3x1/2L1) V5.2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT1NXLND or tavg1_2d_lnd_Nx data product is the MERRA Data Assimilation System 2-Dimensional land surface diagnostic that is time averaged single-level at the...

  7. 3D visualization of mold filling stages in thermal nanoimprint by white light interferometry and atomic force microscopy

    International Nuclear Information System (INIS)

    Schift, Helmut; Gobrecht, Jens; Kim, Geehong; Lee, Jaejong

    2009-01-01

    A method for continuous 3D visualization of the mold filling at a microscopic level during a thermoplastic nanoimprint process was developed. It is based on superposition of micrographs of a series of different stages of imprint. It was applied to two common 3D microscopies with different resolution limitations. Due to advanced image processing, the animated movie sequence, available as supplementary multimedia information in the online version of this journal, gives an unprecedented insight into the complex polymer flow and shows how voids are forming and vanishing during the imprint process around micropillars. The method has advantages over current real-time methods and can be used as an analytical tool for optimization of processes and improvement of stamp design down to the sub-10 nm nanometer range.

  8. Keterkaitan Panhisterektomi dan Suplemen 1,25- Dihidroksivitamin D3 dengan Risiko Urolitiasis pada Tikus (CORRELATION BETWEEN PANHISTERCTOMY AND 1.25-DIHYDROXYVITAMIN D3 SUPPLEMENTATION ON RATS UROLITHIASIS RISK

    Directory of Open Access Journals (Sweden)

    Hartiningsih .

    2013-07-01

    Full Text Available The objective of this research was to study the correlation of panhisterectomy and supplement 1.25-dihydroxyvitamin D3 on urolithiasis risk in Wistar rats. Twenty female Wistar rats at 8 weeks of age, weredivided into four groups (control fed standard diet, control fed standard diet+1,25-dihydroxyvitamin D3 supplement, panhisterectomy fed standard diet and panhisterectomy fed standard diet +1,25-dihydroxyvitamin D3 supplement. Eleven weeks after treatment, each of rats was placed into individualmetabolic cage for balance study for a week. From day 4 to 11 of the balance study, every morning theremaining food, feces, and urine were collected and recorded for calcium (Ca analysis. At the end ofbalance study, blood samples were taken from canthus retroorbitalis medialis for estrogen analysis. Theresults showed urinary and fecal Ca excretions were not significantly different compared to the controlgroup. Calcium consumption was significantly higher (P<0.05 in panhisterectomized rats compared withthose in control rats. While, estrogen in panhisterectomized group was not significantly different to thosein control rats. Calcium urinary and Ca consumption in rats consuming 1,25-dihydroxyvitamin D3 supplement were significantly higher (P<0.05 compared with those in without 1,25-dihydroxyvitamin D3 supplementation, but Ca excretion in feses was not significantly different. Estrogen in rats consuming1.25-dihydroxyvitamin D3 supplement was significantly lower (P<0.05 compared with the rats that without1,25-dihydroxyvitamin D3 supplemention. It can be concluded that panhisterectomy does not seem to affecturolithiasis risk, while 1,25-dihydroxyvitamin D3 supplement may affect urolithiasis risk. There is likelyno association between panhisterectomy and 1.25-dihydroxyvitamin D3 supplementation on urolithiasisrisk in Wistar rats.

  9. Metabolism and biological activity of 24,25-dihydroxyvitamin D3 in the chick

    International Nuclear Information System (INIS)

    Holick, M.F.; Baxter, L.A.; Schraufrogel, P.K.; Tavela, T.E.; DeLuca, H.F.

    1976-01-01

    The vitamin, 24R,24,25-dihydroxyvitamin D 3 , is capable of inducing a minimal intestinal calcium transport response in chicks when compared to an equal amount of 25-hydroxyvitamin D 3 . 1,24,25-Trihydroxyvitamin D 3 is also less active than 1,25-dihydroxyvitamin D 3 , and its activity is much shorter lived than that of 1,25-dihydroxyvitamin D 3 . A comparison of the metabolism of 25-hydroxy[26,27- 3 H]vitamin D 3 and 24,25-dihydroxy[26,27- 3 H]vitamin D 3 in the rat and chick shows that 24,25-dihydroxyvitamin D 3 and 1,24,25-trihydroxyvitamin D 3 disappear at least 10 times more rapidly from the blood and intestine of chicks. Furthermore, examination of the excretory products from both of these species demonstrates that chicks receiving a single dose of 24,25-dihydroxy[26,27- 3 H]vitamin D 3 excrete 66% of the total radioactivity by 48 hours, whereas rats receiving the same dose excrete less than one-half that amount. These results demonstrate that 24,25-dihydroxyvitamin D 3 is considerably less biologically active in the chick than in the rat, probably due to more rapid metabolism and excretion

  10. Hepatitis B virus subgenotypes D1 and D3 are prevalent in Pakistan

    Directory of Open Access Journals (Sweden)

    Chakravarty Runu

    2009-01-01

    Full Text Available Abstract Background As the hepatitis B genotyping is important for assessing its clinical implications and geographical distribution, the sub-genotypes have been found useful for determination of specific genomic markers related to hepatocarcinogenesis. In Pakistan, there is no reported data on molecular evolutionary analysis of HBV. A study was, therefore, much needed to evaluate the spectra of mutations present in the strains prevalent here. Findings to confirm specificity of PCR typing, phylogenetic analysis of the pre-S1 region and the divergence was studied through 13 sequences of 362 bp (accession number EF432765 – EF432777. A total of 315 serum samples, selected from HBsAg positive patients representing the major ethnic groups, residing in Karachi, Sindh were tested for genotyping. Genotype D (219/315 was found to be the most prevalent (70% amongst our patients. The rest of the genotypes A and a mixture of A and D (AD were distributed as 20%, and 10% respectively. Phylogenetic tree demonstrated clustering of 11 samples with subgenotype D1 sequences and the remaining two strains on a branch within D3 samples. All samples intermixed with strains from other countries and were found to be closely related to Indian, Iranian and Egyptian HBV strains with 98.7 – 99.0% homology. Conclusion This study confirms the predominance of genotype D in southeastern Asia and presence of subgenotypes DI and D3 in the Pakistani infected patients. More studies are required to investigate the reason for fewer inclusions of D3 compared to the D1 in Pakistani HBV strains.

  11. Main metabolites of 1-(2-chloroethyl)-3-[1'-(5'-p-nitrobenzoyl-2',3'-isopropylidene)-alpha, beta-D-ribofuranosyl]-1-nitrosourea and 1-(2-chloroethyl)-3-(2',3', 4'-tri-O-acetyl-alpha, beta-D-ribopyranosyl)-1-nitrosourea in rats

    International Nuclear Information System (INIS)

    Madelmont, J.C.; Moreau, M.F.; Godeneche, D.; Duprat, J.; Plagne, R.; Meyniel, G.

    1982-01-01

    The metabolism of two glycosylnitrosoureas, 1-(2-chloroethyl)-3-[1'-(5'-p-nitrobenzoyl-2',3'-isopropylidene)-alpha, beta-D-ribofuranosyl]-1-nitrosourea (RFCNU) and 1-(2-chloroethyl)-3-(2',3',4'-tri-O-acetyl-alpha, beta-D-ribopyranosyl)-1-nitrosourea (RPCNU), has been investigated in the rat. With the label on the carboxyl moiety of RFCNU, we have shown that hydrolysis of the 4-nitrobenzoyl ester occurred to a large extent in vivo; 4-nitrobenzoic acid and its glucuronide were the major urinary metabolites. Two other minor metabolites and their glucuronides were identified as 4-aminobenzoic acid and 4-acetamidobenzoic acid. With the label on the chloroethyl moieties of RFCNU and RPCNU, we have shown that chloroethanol was a major degradation product of this alkylating part of the molecule. The concentration of chloroethanol in plasma vs. time has been determined. In urine, four metabolites derived from alkylated glutathione, namely thiodiacetic acid and its sulfoxide, N-acetylcarboxymethylcysteine, and N-acetylhydroxyethylcysteine, have been identified

  12. 1,25-Dihydroxyvitamin D3 regulates genes responsible for detoxification in intestine

    International Nuclear Information System (INIS)

    Kutuzova, Galina D.; DeLuca, Hector F.

    2007-01-01

    1α,25-Dihydroxyvitamin D 3 (1,25-(OH) 2 D 3 ), the biologically active form of vitamin D 3 , not only plays a major role in mammalian calcium and phosphorous homeostasis but also exerts pleiotropic effects on cell proliferation, differentiation and the immune system. Further, vitamin D is believed to play a significant role in the prevention of colon, prostate, and breast cancer and in reducing the risk of autoimmune diseases. To gain insight into the mechanism whereby vitamin D can have such diverse actions, we have employed microarray technology. We studied the effect of a single dose of 1,25-(OH) 2 D 3 on gene expression in the intestine of vitamin D-deficient rats. Within 6 h, 1,25-(OH) 2 D 3 stimulates the expression of several phase I and phase II biotransformation genes. There is also an increased expression of antioxidant genes. These results support the idea that vitamin D is a significant factor in detoxification and protection against environmental toxins

  13. Data of evolutionary structure change: 1ONAD-2D3PC [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3PC 1ONA 2D3P D C ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...14> 1ONA D 1ONAD

  14. Data of evolutionary structure change: 1ONAD-2D3RC [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3RC 1ONA 2D3R D C ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT... 1ONA D 1ONAD TRVSSN

  15. EuCARD-Del-D3.1.2

    CERN Document Server

    Palladino, V

    2013-01-01

    The European accelerator neutrino community submitted end of July 2012 to the European Strategy in Particle Physics (ESPP) 2012 Symposium its proposal of the next global accelerator neutrino () facility for Europe to build or help build (NEu2012 D3.3.1): a new giant European underground home for mega  detectors in Finland 2300 Km from CERN, served by MW CERN  beams, ultimately a 10 GeV Neutrino Factory. Early in 2013, NEu2012 D3.2.1 documented further the analysis of performance and physics potential of upgrades and/or of major additions to existing neutrino facilities as evaluated in the NEu2012 years. Since, the Draft ESPP 2012 Strategy Upgrade Document re-emphasised the strong scientific case for a long-baseline (LBL)  programme, the need of a CERN programme for a substantial European role, possibly major participation in leading  projects in the US and Japan. Last contribution of the Network, taking stock of developments (the emergence of a ESS  option, the EUROnu costing report, a state...

  16. Ozone Nonattainment Areas - 1 Hour

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data layer identifies areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for Ozone - 1hour (Legacy...

  17. Data of evolutionary structure change: 1ONAD-2D3PB [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3PB 1ONA 2D3P D B ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ain> 1ONA D 1ONAD TR

  18. Data of evolutionary structure change: 1ONAD-2D3RA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3RA 1ONA 2D3R D A ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ID>1ONA D 1ONAD TRVSSNGSPQG <

  19. Synthesis and Spectral Analysis of 3,4,5-trichloro-6-(dibenzo[d,f][1,3]diazepin-5-yl-[1,2]-benzoquinones

    Directory of Open Access Journals (Sweden)

    Mohsen A. M. Gomaa

    2011-01-01

    Full Text Available Reaction of N1,N2-di-(4-methoxyphenyl- or N1,N2-di-(4-hydroxyphenyl -amidines (1a-d with 3,4,5,6-tetrachloro-1,2-benzoquinone (2 in ethyl acetate at room temperature led to formation of new 3,4,5-trichloro-6-(2-hydroxy-6-methyldibenzo[d,f][1,3]diazepin-5-yl[1,2]-benzoquinones (3a-d in addition to N-aryl-N'-(6,7,8,9-tetrachloro-4-hydroxydibenzo-[1,4]dioxin-2-ylacetamidines (4a,b. The rational of formation of products 3a-d and 4a,b was discussed and structures were confirmed on the basis of elemental analysis and spectral data.

  20. Optical contrast spectra studies for determining thickness of stage-1 graphene-FeCl{sub 3} intercalation compounds

    Energy Technology Data Exchange (ETDEWEB)

    Han, Wen-Peng, E-mail: han-wenpeng@163.com, E-mail: yunze.long@163.com; Yan, Xu; Zhao, Hui [College of Physics, Qingdao University, Qingdao 266071 (China); Li, Qiao-Qiao; Lu, Yan [State Key Laboratory for Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China); Long, Yun-Ze, E-mail: han-wenpeng@163.com, E-mail: yunze.long@163.com [College of Physics, Qingdao University, Qingdao 266071 (China); Collaborative Innovation Center for Low-Dimensional Nanomaterials and Optoelectronic Devices, Qingdao University, Qingdao 266071 (China)

    2016-07-15

    Because of novel features in their structural, electronic, magnetic and optical properties, especially potential applications in nanoelectronics, the few-layer graphene intercalation compounds (FLGICs) have been intensively studied recently. In this work, the dielectric constant of the doped graphene of stage-1 FeCl{sub 3}-GIC is obtained by fitting the optical contrast spectra. And fully intercalated stage-1 FeCl{sub 3}-FLGICs were prepared by micromechanical cleavage method from graphite intercalation compounds (GICs) for the first time. Finally, we demonstrated that the thickness of stage-1 FeCl{sub 3}-GICs by micromechanical cleavage can be determined by optical contrast spectra. This method also can be used to other FLGICs, such as SbCl{sub 5}-FLGICs and AuCl{sub 5}-FLGICs, etc.

  1. Analysis of 3D crack propagation by microfocus computed tomography

    International Nuclear Information System (INIS)

    Ao Bo; Chen Fuxing; Deng Cuizhen; Zeng Yabin

    2014-01-01

    The three-point bending test of notched specimens of 2A50 forging aluminum was performed by high frequency fatigue tester, and the surface cracks of different stages were analyzed and contrasted by SEM. The crack was reconstructed by microfocus computed tomography, and its size, position and distribution were visually displayed through 3D visualization. The crack propagation behaviors were researched through gray value and position of crack front of 2D CT images in two adjacent stages, and the results show that crack propagation is irregular. The projection image of crack was obtained if crack of two stages projected onto the reference plane respectively, a significant increase of new crack propagation was observed compared with the previous projection of crack, and the distribution curve of crack front of two stages was displayed. The 3D increment distribution of the crack front propagation was obtained through the 3D crack analysis of two stages. (authors)

  2. Dopamine D1 and D3 receptor polypharmacology as a potential treatment approach for substance use disorder.

    Science.gov (United States)

    Galaj, Ewa; Ewing, Scott; Ranaldi, Robert

    2018-06-01

    In the search for efficacious pharmacotherapies to treat cocaine addiction much attention has been given to agents targeting dopamine D1 or D3 receptors because of the involvement of these receptors in drug-related behaviors. D1-like and D3 receptor partial agonists and antagonists have been shown to reduce drug reward, reinstatement of drug seeking and conditioned place preference in rodents and non-human primates. However, translation of these encouraging results to clinical settings has been limited due to a number of factors including toxicity, poor pharmacokinetic properties and extrapyramidal and sedative side effects. This review highlights the role of D1 and D3 receptors in drug reward and seeking, the discovery of D1-D3 heteromers and their potential as targets in the treatment of addiction. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Development and validation of a direct-comparison method for cardiac {sup 123}I-metaiodobenzylguanidine washout rates derived from late 3-hour and 4-hour imaging

    Energy Technology Data Exchange (ETDEWEB)

    Okuda, Koichi; Hashimoto, Mitsumasa [Kanazawa Medical University, Department of Physics, Kahoku, Ishikawa (Japan); Nakajima, Kenichi; Matsuo, Shinro; Taki, Junichi; Kinuya, Seigo [Kanazawa University Hospital, Department of Nuclear Medicine, Kanazawa, Ishikawa (Japan); Sugino, Shuichi [Okayama Kyokuto Hospital, Department of Radiology, Okayama, Okayama (Japan); Kirihara, Yumiko [FUJIFILM RI Pharma Co., Ltd., Chuo-Ku, Tokyo (Japan)

    2016-02-15

    The washout rate (WR) has been used in {sup 123}I-metaiodobenzylguanidine (MIBG) imaging to evaluate cardiac sympathetic innervation. However, WR varies depending on the time between the early and late MIBG scans. Late scans are performed at either 3 or 4 hours after injection of MIBG. The aim of this study was to directly compare the WR at 3 hours (WR{sub 3h}) with the WR at 4 hours (WR{sub 4h}). We hypothesized that the cardiac count would reduce linearly between the 3-hour and 4-hour scans. A linear regression model for cardiac counts at two time-points was generated. We enrolled a total of 96 patients who underwent planar {sup 123}I-MIBG scintigraphy early (15 min) and during the late phase at both 3 and 4 hours. Patients were randomly divided into two groups: a model-creation group (group 1) and a clinical validation group (group 2). Cardiac counts at 15 minutes (count{sub early}), 3 hours (count{sub 3h}) and 4 hours (count{sub 4h}) were measured. Cardiac count{sub 4h} was mathematically estimated using the linear regression model from count{sub early} and count{sub 3h}. In group 1, the actual cardiac count{sub 4h}/count{sub early} was highly significantly correlated with count{sub 3h}/count{sub early} (r = 0.979). In group 2, the average estimated count{sub 4h} was 92.8 ± 31.9, and there was no significant difference between this value and the actual count{sub 4h} (91.9 ± 31.9). Bland-Altman analysis revealed a small bias of -0.9 with 95 % limits of agreement of -6.2 and +4.3. WR{sub 4h} calculated using the estimated cardiac count{sub 4h} was comparable to the actual WR{sub 4h} (24.3 ± 9.6 % vs. 25.1 ± 9.7 %, p = ns). Bland-Altman analysis and the intraclass correlation coefficient showed that there was excellent agreement between the estimated and actual WR{sub 4h}. The linear regression model that we used accurately estimated cardiac count{sub 4h} using count{sub early} and count{sub 3h}. Moreover, WR{sub 4h} that was mathematically calculated using

  4. Data of evolutionary structure change: 1ONAD-2D3RB [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3RB 1ONA 2D3R D B ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...pdbID>1ONA D 1ONAD TRVSSNGSPQG

  5. [Efficacy of 3D print guide technique in one stage posterior approach for the treatment of cervical and thoracic tuberculosis with kyphosis].

    Science.gov (United States)

    Shaxika, Nazierhan; Sun, Z G; Yuan, H; Wang, H

    2017-11-21

    Objective: To investigate the application of 3D printing technology in the treatment of patients with cervical kyphosis and paraplegia in different segments of the cervical spine after one-stage debridement, bone graft fusion and pedicle screw fixation. Methods: From January 2008 to January 2017, a total of 31 patients with thoracolumbar tuberculosis were treated in the Department of Orthopaedics, the Xinjiang Uygur Autonomous Region people's Hospital.Lesions of the thoracic spine (T1-T4) in 8 cases, (C5-C7) in 10 cases, cervical and thoracic segment in 13 cases, involving a total of 2 cases of vertebral body in 7 cases, 3 cases of vertebral body in 14 cases, 4 cases of vertebral body. 3D printing group (group A) 12 cases, non 3D printing group (group B) of 19 cases.All cases were treated with a posterior approach to the treatment of the cervical spinal cord around the spinal cord.After taking regular anti tuberculosis drugs in 6-12 months, follow-up observation of correction of kyphosis and paraplegia recovery, blood sedimentation rate (ESR), C-reactive protein (CRP) changes. Results: All cases were followed up for at least 6 months. Twelve patients were treated with 3D printing technique before operation, and the operation was performed according to the preoperative plan.The diameter and length of pedicle screws, the direction of insertion, and the distance between the insertion point and the posterior midline of the pedicle screw were similar to those in the 3D.Three days after the operation, the effect of fracture reduction was satisfactory, and the position of pedicle screws was good.After 6 months of follow-up, the X-ray showed that the pedicle screws were in good position, and there was no loosening and fracture.All the patients were healed, and there was no segmental instability.3D printing group during surgery bleeding, operation time, postoperative drainage volume, compared with the non 3D print group of surgical results, 3D printing group significantly

  6. Four-Hour Dives with Exercise While Breathing Oxygen Partial Pressure of 1.3 ATM

    National Research Council Canada - National Science Library

    Shykoff, B

    2006-01-01

    ...) or less but does not address the possible accumulation of effects over multiple days. We have conducted experimental four-hour dives with oxygen partial pressure (Po2) of approximately 1.4 atmospheres (atm...

  7. Three-Hour Dives with Exercise While Breathing Oxygen Partial Pressure of 1.3 ATM

    National Research Council Canada - National Science Library

    Shykoff, B

    2007-01-01

    ...) or less but does not address the possible accumulation of effects over multiple days. When we conducted experimental four-hour dives with oxygen partial pressure (Po2) of approximately 1.4 atmospheres (atm...

  8. Comparison between intensity modulated radiotherapy (IMRT) and 3D tangential beams technique used in patients with early-stage breast cancer who received breast-conserving therapy

    International Nuclear Information System (INIS)

    Sas-Korczynska, B.; Kokoszka, A.; Korzeniowski, S.; Sladowska, A.; Rozwadowska-Bogusz, B.; Lesiak, J.; Dyczek, S.

    2010-01-01

    Background: The most often found complications in patients with breast cancer who received radiotherapy are cardiac and pulmonary function disorders and development of second malignancies. Aim: To compare the intensity modulated radiotherapy with the 3D tangential beams technique in respect of dose distribution in target volume and critical organs they generate in patients with early-stage breast cancer who received breast-conserving therapy. Materials and methods: A dosimetric analysis was performed to assess the three radiotherapy techniques used in each of 10 consecutive patients with early-stage breast cancer treated with breast-conserving therapy. Radiotherapy was planned with the use of all the three techniques: 3D tangential beams with electron boost, IMRT with electron boost, and intensity modulated radiotherapy with simultaneous integrated boost. Results: The use of the IMRT techniques enables more homogenous dose distribution in target volume. The range of mean and median dose to the heart and lung was lower with the IMRT techniques in comparison to the 3D tangential beams technique. The range of mean dose to the heart amounted to 0.3 - 3.5 Gy for the IMRT techniques and 0.4 - 4.3 for the tangential beams technique. The median dose to the lung on the irradiated side amounted to 4.9 - 5 Gy for the IMRT techniques and 5.6 Gy for the 3D tangential beams technique. Conclusion: The application of the IMRT techniques in radiotherapy patients with early-stage breast cancer allows to obtain more homogenous dose distribution in target volume, while permitting to reduce the dose to critical organs. (authors)

  9. Data of evolutionary structure change: 1ONAD-2D3PA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1ONAD-2D3PA 1ONA 2D3P D A ADTIVAVELDTYPNTDIGDPSYPHIGIDIKSVRSKKTAK...WNMQNGKVGTAHIIYNSVDKRLSAVVSYPNADSATVSYDVDLDNVLPEWVRVGLSASTGLYKETNTILSWSFTSKLKT------NALHFMFNQFSKDQKDLILQGDAT...ONA D 1ONAD LTRVSSNGSPQ

  10. Adobe Flash 11 Stage3D (Molehill) Game Programming Beginner's Guide

    CERN Document Server

    Kaitila, Christer

    2011-01-01

    Written in an informal and friendly manner, the style and approach of this book will take you on an exciting adventure. Piece by piece, detailed examples help you along the way by providing real-world game code required to make a complete 3D video game. Each chapter builds upon the experience and achievements earned in the last, culminating in the ultimate prize - your game! If you ever wanted to make your own 3D game in Flash, then this book is for you. This book is a perfect introduction to 3D game programming in Adobe Molehill for complete beginners. You do not need to know anything about S

  11. (1S-1,2-O-Benzylidene-α-d-glucurono-6,3-lactone

    Directory of Open Access Journals (Sweden)

    David J. Watkin

    2009-02-01

    Full Text Available X-ray crystallographic analysis has established that the major product from the protection of d-glucoronolactone with benzaldehyde is (1S-1,2-O-benzylidene-α-d-glucurono-6,3-lactone, C13H12O6, rather than the R epimer. The crystal structure exists as O—H...O hydrogen-bonded chains of molecules lying parallel to the a axis. The absolute configuration was determined by the use of d-glucuronolactone as the starting material.

  12. 1,25-Dihydroxyvitamin D3 Treatment Shrinks Uterine Leiomyoma Tumors in the Eker Rat Model1

    Science.gov (United States)

    Halder, Sunil K.; Sharan, Chakradhari; Al-Hendy, Ayman

    2012-01-01

    ABSTRACT Uterine leiomyomas (fibroids) are the most common benign tumors in women of reproductive age. These tumors are three to four times more prevalent in African American women, who also have a 10 times higher incidence of hypovitaminosis D than white women. Recent studies have demonstrated the antitumor effects of 1,25-dihydroxyvitamin D3 on several cancers, but its effects on uterine leiomyomas are still unknown. To determine the antitumor and therapeutic effects of 1,25-dihydroxyvitamin D3 on uterine leiomyomas, female Eker rats (14–16 mo old) harboring uterine leiomyomas were randomized into control and experimental groups and were given vehicle versus 1,25-dihydroxyvitamin D3 (0.5 μg/kg per day) subcutaneously for 3 wk, respectively. At the end of the experiment, the rats were euthanized, and the leiomyoma tumors were analyzed. Treatment with 1,25-dihydroxyvitamin D3 significantly reduced leiomyoma tumor size in Eker rats. It also reduced leiomyoma size by suppressing cell growth and proliferation-related genes (Pcna, cyclin D1 [Ccnd1], Myc, Cdk1, Cdk2, and Cdk4), antiapoptotic genes (Bcl2 and Bcl2l1 [Bcl-x]), and estrogen and progesterone receptors. Additionally, immunohistochemistry revealed decreased expression of PCNA and MKI67 (a marker of proliferation) and increased expression of caspase 3 in 1,25-dihydroxyvitamin D3-treated Eker rat leiomyomas. Toxicity analyses using serum samples showed similar levels of SGOT, SGPT, calcium, and total bilirubin in 1,25-dihydroxyvitamin D3-treated and vehicle-treated control Eker rats. These results support that 1,25-dihydroxyvitamin D3 is an antitumor agent that may be a potential safe, nonsurgical therapeutic option for the treatment of uterine leiomyomas. PMID:22302692

  13. CARMA3 is overexpressed in colon cancer and regulates NF-κB activity and cyclin D1 expression

    International Nuclear Information System (INIS)

    Miao, Zhifeng; Zhao, Tingting; Wang, Zhenning; Xu, Yingying; Song, Yongxi; Wu, Jianhua; Xu, Huimian

    2012-01-01

    Highlights: ► CARMA3 expression is elevated in colon cancers. ► CARMA3 promotes proliferation and cell cycle progression in colon cancer cells. ► CARMA3 upregulates cyclinD1 through NF-κB activation. -- Abstract: CARMA3 was recently reported to be overexpressed in cancers and associated with the malignant behavior of cancer cells. However, the expression of CARMA3 and its biological roles in colon cancer have not been reported. In the present study, we analyzed the expression pattern of CARMA3 in colon cancer tissues and found that CARMA3 was overexpressed in 30.8% of colon cancer specimens. There was a significant association between CARMA3 overexpression and TNM stage (p = 0.0383), lymph node metastasis (p = 0.0091) and Ki67 proliferation index (p = 0.0035). Furthermore, knockdown of CARMA3 expression in HT29 and HCT116 cells with high endogenous expression decreased cell proliferation and cell cycle progression while overexpression of CARMA3 in LoVo cell line promoted cell proliferation and facilitated cell cycle transition. Further analysis showed that CARMA3 knockdown downregulated and its overexpression upregulated cyclin D1 expression and phospho-Rb levels. In addition, we found that CARMA3 depletion inhibited p-IκB levels and NF-κB activity and its overexpression increased p-IκB expression and NF-κB activity. NF-κB inhibitor BAY 11-7082 reversed the role of CARMA3 on cyclin D1 upregulation. In conclusion, our study found that CARMA3 is overexpressed in colon cancers and contributes to malignant cell growth by facilitating cell cycle progression through NF-κB mediated upregulation of cyclin D1.

  14. Benefits resulting from 1- and 6-hour parathyroid hormone and calcium levels after thyroidectomy.

    Science.gov (United States)

    Payne, Richard J; Tewfik, Marc A; Hier, Michael P; Tamilia, Michael; Mac Namara, Elizabeth; Young, Jonathan; Black, Martin J

    2005-09-01

    Previous studies have established the efficacy of post-thyroidectomy hypocalcemia monitoring using parathyroid hormone (PTH) and corrected calcium levels at 1 and 6 hours. The goal of this study was to measure the impact of managing patients based on the above findings with respect to: duration of hospital stays, rates of transient hypocalcemia, number of blood tests, cost savings, and discharge from the hospital as early as 8 hours post-thyroidectomy without compromising safety. This is a prospective study involving 95 total thyroidectomy patients using historical data as controls. The previous protocol was modified in that all blood tests ceased for patients meeting the 6-hour critical level of PTH > or = 28 ng/L and simultaneous corrected calcium > or = 2.14 mmol/L (8.56 mg/dL). Furthermore, patients with 1-hour PTH levels cost savings of 766 Canadian dollars per patient. The new algorithm resulting from PTH and corrected calcium monitoring at 1 and 6 hours post-thyroidectomy has led to significant cost savings for our institution. It has also translated into greater patient satisfaction as a result of fewer blood tests, a lower incidence of transient hypocalcemia, and significantly shorter hospital stays.

  15. 3D integrated superconducting qubits

    Science.gov (United States)

    Rosenberg, D.; Kim, D.; Das, R.; Yost, D.; Gustavsson, S.; Hover, D.; Krantz, P.; Melville, A.; Racz, L.; Samach, G. O.; Weber, S. J.; Yan, F.; Yoder, J. L.; Kerman, A. J.; Oliver, W. D.

    2017-10-01

    As the field of quantum computing advances from the few-qubit stage to larger-scale processors, qubit addressability and extensibility will necessitate the use of 3D integration and packaging. While 3D integration is well-developed for commercial electronics, relatively little work has been performed to determine its compatibility with high-coherence solid-state qubits. Of particular concern, qubit coherence times can be suppressed by the requisite processing steps and close proximity of another chip. In this work, we use a flip-chip process to bond a chip with superconducting flux qubits to another chip containing structures for qubit readout and control. We demonstrate that high qubit coherence (T1, T2,echo > 20 μs) is maintained in a flip-chip geometry in the presence of galvanic, capacitive, and inductive coupling between the chips.

  16. Weighted f-values, A-values, and line strengths for the E1 transitions among 3d6, 3d54s, and 3d54p levels of Fe III

    International Nuclear Information System (INIS)

    Deb, Narayan C.; Hibbert, Alan

    2009-01-01

    Weighted oscillator strengths, weighted radiative rates, and line strengths for all the E1 transitions between 285 fine-structure levels belonging to the 3d 6 , 3d 5 4s, and 3d 5 4p configurations of Fe III are presented, in ascending order of wavelength. Calculations have been undertaken using the general configuration interaction (CI) code CIV3. The large configuration set is constructed by allowing single and double replacements from any of 3d 6 , 3d 5 4s, 3d 5 4p, and 3d 5 4d configurations to nl orbitals with n≤5,l≤3 as well as 6p. Additional selective promotions from 3s and 3p subshells are also included in the CI expansions to incorporate the important correlation effects in the n=3 shell. Results of some strong transitions between levels of 3d 6 , 3d 5 4s, and 3d 5 4p configurations are also presented and compared with other available calculations. It is found that large disagreements occur in many transitions among the existing calculations

  17. Comparisons of dose-volume histograms for proton-beam versus 3-D conformal X-ray therapy in patients with stage I non-small cell lung cancer

    International Nuclear Information System (INIS)

    Wang, Changlu; Nakayama, Hidetsugu; Sugahara, Shinji; Sakae, Takeji; Tokuuye, Koichi

    2009-01-01

    Dose-volume histograms (DVHs) were reviewed to determine if there is an advantage of the two modalities when treating patients with non-small cell lung cancer (NSCLC). 24 stage I NSCLC patients who underwent proton-beam therapy (PBT) from June 2003 to May 2007 were included in this study. Based on the same clinical target volumes (CTVs), treatment planning was made to cover CTV within 90% isodose lines. Each patient was evaluated by two sets of DVHs, one for PBT and the other for three-dimensional conformal X-ray therapy (3D-CRT). For all patients, the 95% isodose line covered 86.4% of the CTV for PBT, and 43.2% for 3D-CRT. PBT was associated with significantly lower mean doses to the ipsilateral lung, total lung, heart, esophagus, and spinal cord than 3D-CRT. PBT offered reduced radiation doses to the lung when evaluated in terms of percentage lung volumes receiving ≥ 5 Gy (V 5 ), ≥ 10 Gy (V 10 ), and ≥ 20 Gy (V 20 ) when compared to 3D-CRT. PBT is advantageous over 3D-CRT in reducing doses to the lung, heart, esophagus, and spinal cord in treating stage I NSCLC. (orig.)

  18. APPLICATION OF 3D MODELING IN 3D PRINTING FOR THE LOWER JAW RECONSTRUCTION

    Directory of Open Access Journals (Sweden)

    Yu. Yu. Dikov

    2015-01-01

    Full Text Available Aim of study: improvement of functional and aesthetic results of microsurgery reconstructions of the lower jaw due to the use of the methodology of 3D modeling and 3D printing. Application of this methodology has been demonstrated on the example of treatment of 4 patients with locally distributed tumors of the mouth cavity, who underwent excision of the tumor with simultaneous reconstruction of the lower jaw with revascularized fibular graft.Before, one patient has already undergo segmental resection of the lower jaw with the defect replacement with the avascular ileac graft and a reconstruction plate. Then, a relapse of the disease and lysis of the graft has developed with him. Modeling of the graft according to the shape of the lower jaw was performed by making osteotomies of the bone part of the graft using three-dimensional virtual models created by computed tomography data. Then these 3D models were printed with a 3D printer of plastic with the scale of 1:1 with the fused deposition modeling (FDM technology and were used during the surgery in the course of modeling of the graft. Sterilizing of the plastic model was performed in the formalin chamber.This methodology allowed more specific reconstruction of the resected fragment of the lower jaw and get better functional and aesthetic results and prepare patients to further dental rehabilitation. Advantages of this methodology are the possibility of simultaneous performance of stages of reconstruction and resection and shortening of the time of surgery.

  19. Experimental and kinetics studies of aromatic hydrogenation in a two-stage hydrotreating process using NiMo/Al{sub 2}O{sub 3} and NiW/Al{sub 2}O{sub 3} catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Owusu-Boakye, A.; Dalai, A.K.; Ferdous, D. [Saskatchewan Univ., Saskatoon, SK (Canada). Dept. of Chemical Engineering, Catalysis and Chemical Reaction Engineering Laboratories; Adjaye, J. [Syncrude Canada Ltd., Edmonton, AB (Canada)

    2006-10-15

    The degree of hydrogenation of aromatics in light gas oil (LGO) feed from Athabasca bitumen was examined using a two-stage process. Experiments were conducted in a trickle-bed reactor using 2 catalysts, namely nickel molybdenum alumina (NiMo/Al{sub 2}O{sub 3}) in stage one and nickel tungsten alumina (NiW/Al{sub 2}O{sub 3}) in the second stage. NiMo/Al{sub 2}O{sub 3} was used in the first stage in order to remove nitrogen and sulphur containing heteroatoms. NiW/Al{sub 2}O{sub 3} was used in the second stage for saturation of the aromatic rings in the hydrocarbon species. The catalysts were used under a range of temperature and pressure condition. Temperature and liquid hourly space velocity ranged from 350 to 390 degrees C and 1.0 to 1.5 per hour, respectively. Pressure was kept constant at 11.0 MPa for all experiments. Reaction time results from the two-stage process were compared with those from a single-stage where hydrotreating was performed over NiMo/AL{sub 2}O{sub 3}. Product samples from different feedstocks were analyzed with respect to sulfur, nitrogen and aromatic content. Gasoline selectivity and kinetic parameters for hydrodesulphurization (HDS) or hydrodenitrogenation (HDN) reactions for the feed materials were also compared. The effect of hydrogen sulphide (H{sub 2}S) inhibition on aromatics hydrogenation (HDA) was also kinetically modelled using the Langmuir-Hinshelwood approach. Kinetic analysis of the single-stage hydrotreating process showed that HDA and HDS activities were slowed by the presence of hydrogen sulphide that is produced as a by-product of the HDS process. However, with inter-stage removal of hydrogen sulphide in the two-stage process, significant improvement of the HDA and HDS activities were noted. It was concluded that the experimental data was successfully predicted by the Langmuir-Hinshelwood kinetic models. 27 refs., 4 tabs., 8 figs.

  20. Steady-State Serum T3 Concentrations for 48 Hours Following the Oral Administration of a Single Dose of 3,5,3'-Triiodothyronine Sulfate (T3S).

    Science.gov (United States)

    Santini, Ferruccio; Giannetti, Monica; Ricco, Ilaria; Querci, Giorgia; Saponati, Giorgio; Bokor, Daniela; Rivolta, Giovanni; Bussi, Simona; Braverman, Lewis E; Vitti, Paolo; Pinchera, Aldo

    2014-07-01

    Sulfate conjugation of thyroid hormones is an alternate metabolic pathway that facilitates the biliary and urinary excretion of iodothyronines and enhances their deiodination rate, leading to the generation of inactive metabolites. A desulfating pathway reverses this process, and thyromimetic effects have been observed following the parenteral administration of 3,5,3'-triiodothyronine (T3) sulfate (T3S) in rats. The present study investigated whether T3S is absorbed after oral administration in humans and if it represents a source of T3. Twenty-eight hypothyroid patients (7 men and 21 women; mean age, 44 ± 11 years) who had a thyroidectomy for thyroid carcinoma were enrolled. Replacement thyroid hormone therapy was withdrawn (42 days for thyroxine, 14 days for T3) prior to 131I remnant ablation. A single oral dose of 20, 40, 80 (4 patients/group), or 160 μg (16 patients/group) of T3S was administered 3 days before the planned administration of 131I. Blood samples for serum T3S and total T3 (TT3) concentrations were obtained at various times up to 48 hours after T3S administration. At all T3S doses, serum T3S concentrations increased, reaching a peak at 2 to 4 hours and progressively returning to basal levels within 8 to 24 hours. The T3S maximum concentration (Cmax) and area under the 0- to 48-hour concentration-time curve (AUC0-48h) were directly and significantly related to the administered dose. An increase in serum TT3 concentration was observed (significant after 1 hour), and the concentration increased further at 2 and 4 hours and then remained steady up to 48 hours after T3S administration. There was a significant direct correlation between the TT3 AUC0-48h and the administered dose of T3S. No changes in serum free thyroxine (T4) concentrations during the entire study period were observed, whereas serum thyroid-stimulating hormone levels increased slightly at 48 hours, but this was not related to the dose of T3S. No adverse events were reported. (1) T3S is

  1. D-6-Deoxy-myo-inositol 1,3,4,5-tetrakisphosphate, a mimic of D-myo-inositol 1,3,4,5-tetrakisphosphate: biological activity and pH-dependent conformational properties

    International Nuclear Information System (INIS)

    Horne, Graeme; Maechling, Clarisse; Fleig, Andrea; Hirata, Masato; Penner, Reinhold; Spiess, Bernard; Potter, Barry V.L.

    2004-01-01

    D-6-Deoxy-myo-inositol 1,3,4,5-tetrakisphosphate [D-6-deoxy-Ins(1,3,4,5)P 4 ] 3 is a novel deoxygenated analogue of D-myo-inositol 1,3,4,5-tetrakisphosphate [Ins(1,3,4,5)P 4 ] 2, a central and enigmatic molecule in the polyphosphoinositide pathway of cellular signalling. D-6-Deoxy-Ins(1,3,4,5)P 4 is a moderate inhibitor of Ins(1,4,5)P 3 5-phosphatase [1.8 μM] compared to Ins(1,3,4,5)P 4 [0.15 μM] and similar to that of L-Ins(1,3,4,5)P 4 [1.8 μM]. In displacement of [ 3 H] Ins(1,4,5)P 3 from the rat cerebellar Ins(1,4,5)P 3 receptor, while slightly weaker [IC 50 =800 nM] than that of D-Ins(1,3,4,5)P 4 [IC 50 =220 nM], 3 is less markedly different and again similar to that of L-Ins(1,3,4,5)P 4 [IC 50 =660 nM]. 3 is an activator of I CRAC when inward currents are measured in RBL-2H3-M1 cells using patch-clamp electrophysiological techniques with a facilitation curve different to that of Ins(1,3,4,5)P 4 . Physicochemical properties were studied by potentiometric 31 P and 1 H NMR titrations and were similar to those of Ins(1,3,4,5)P 4 apart from the observation of a biphasic titration curve for the P1 phosphate group. A novel vicinal phosphate charge-induced conformational change of the inositol ring above pH 10 was observed for D-6-deoxy-Ins(1,3,4,5)P 4 that would normally be hindered because of the central stabilising role played by the 6-OH group in Ins(1,3,4,5)P 4 . We conclude that the 6-OH group in Ins(1,3,4,5)P 4 is crucial for its physicochemical behaviour and biological properties of this key inositol phosphate

  2. Vitamin D Status in Patients With Stage IV Colorectal Cancer: Findings From Intergroup Trial N9741

    Science.gov (United States)

    Ng, Kimmie; Sargent, Daniel J.; Goldberg, Richard M.; Meyerhardt, Jeffrey A.; Green, Erin M.; Pitot, Henry C.; Hollis, Bruce W.; Pollak, Michael N.; Fuchs, Charles S.

    2011-01-01

    Purpose Previous studies have suggested that higher plasma 25-hydroxyvitamin D3 [25(OH)D] levels are associated with decreased colorectal cancer risk and improved survival, but the prevalence of vitamin D deficiency in advanced colorectal cancer and its influence on outcomes are unknown. Patients and Methods We prospectively measured plasma 25(OH)D levels in 515 patients with stage IV colorectal cancer participating in a randomized trial of chemotherapy. Vitamin D deficiency was defined as 25(OH)D lower than 20 ng/mL, insufficiency as 20 to 29 ng/mL, and sufficiency as ≥ 30 ng/mL. We examined the association between baseline 25(OH)D level and selected patient characteristics. Cox proportional hazards models were used to calculate hazard ratios (HR) for death, disease progression, and tumor response, adjusted for prognostic factors. Results Among 515 eligible patients, 50% of the study population was vitamin D deficient, and 82% were vitamin D insufficient. Plasma 25(OH)D levels were lower in black patients compared to white patients and patients of other race (median, 10.7 v 21.1 v 19.3 ng/mL, respectively; P < .001), and females compared to males (median, 18.3 v 21.7 ng/mL, respectively; P = .0005). Baseline plasma 25(OH)D levels were not associated with patient outcome, although given the distribution of plasma levels in this cohort, statistical power for survival analyses were limited. Conclusion Vitamin D deficiency is highly prevalent among patients with stage IV colorectal cancer receiving first-line chemotherapy, particularly in black and female patients. PMID:21422438

  3. PET/CT staging of T1-stage non-small cell lung cancer

    International Nuclear Information System (INIS)

    Salman, K. A.; Steinmann, C. H.; Von Schulthess, G. K.; Steinert, H. C.; Sukumar, V. P.

    2009-01-01

    Full text:Purpose: To evaluate the value of PET/CT in detecting occult metastases in patients with T 1 -stage non-small cell lung cancer (NSCLC). Method: Patients with proven NSCLC and T 1 -stage ( c m) were retrospectively analyzed. In all patients a whole-body 18 F-FDG PET/CT scan for initial staging was performed. The PET/CT findings were compared with all available clinical information, intra-operative findings and the histopathological results. Results: 95 patients (39 men, 56 women; age range, 19-85 years) were analyzed in our study. PET/CT in 68-95 patients correctly excluded mediastinal and distant metastases. In 17/95 patients (18%) mediastinal lymph-node metastases were proven (N 2 n=15; N 3 n=2). PET/CT correctly detected in 10/17 patients (58.8%) mediastinal nodal disease. The smallest mediastinal lymph-node metastasis detected by PET/CT had a size of 0.7 c m. In 7 patients PET/CT missed N 2 -stage. In three of these patients the SUVmax of the primary was c m. Only in one missed N 2 -stage metastasis was sized > 1.0 c m. The tumor histology (adenocarcinoma, squamous cell carcinoma) and location of the primary (central, periphery) did not influence the missed N 2 -stage by PET/CT. PET/CT diagnosed correctly N 3 -stage in 2 patients. 10/95 patients (10.5%) had distant metastases. PET/CT detected unknown M 1 -stage in 4/10 patients. In one patient a metastasis of the parietal pleura was missed by PET/CT. Conclusion: In our study, 28% patients with T 1 -stage NSCLC showed mediastinal or distant metastases. PET/CT was efficient in the detection of occult metastases. However, the sensitivity of PET/CT in mediastinal staging was only 64%.

  4. Synthesis of 25-hydroxy-[26,27-3H]vitamin D2, 1,25-dihydroxy-[26,27-3H]vitamin D2 and their (24R)-epimers

    International Nuclear Information System (INIS)

    Sicinski, R.R.; Tanaka, Y.; Phelps, M.; Schnoes, H.K.; DeLuca, H.F.

    1987-01-01

    Synthesis of a C-24-epimeric mixture of 25-hydroxy-[26,27- 3 H]vitamin D2 and a C-24-epimeric mixture of 1,25-dihydroxy-[26,27- 3 H]vitamin D2 by the Grignard reaction of the corresponding 25-keto-27-nor-vitamin D2 and 1 alpha-acetoxy-25-keto-27-nor-vitamin D3 with tritiated methyl magnesium bromide is described. Separation of epimers by high-performance liquid chromatography afforded pure radiolabeled vitamins of high specific activity (80 Ci/mmol). The identities and radiochemical purities of 25-hydroxy-[26,27- 3 H[vitamin D2 and 1,25-dihydroxy-[26,27- 3 H]vitamin D2 D2 were established by cochromatography with synthetic 25-hydroxyvitamin D2 or 1,25-dihydroxyvitamin D2. Biological activity of 25-hydroxy-[26,27- 3 H]vitamin D2 was demonstrated by its binding to the rat plasma binding protein for vitamin D compounds, and by its in vitro conversion to 1,25-dihydroxy-[26,27- 3 H]vitamin D2 by kidney homogenate prepared from vitamin D-deficient chickens. The biological activity of 1,25-dihydroxy-[26,27- 3 H]vitamin D2 was demonstrated by its binding to the chick intestinal receptor for 1,25-dihydroxyvitamin D3

  5. Light and Fungal Elicitor Induce 3-Deoxy-d-arabino-Heptulosonate 7-Phosphate Synthase mRNA in Suspension Cultured Cells of Parsley (Petroselinum crispum L.) 1

    Science.gov (United States)

    Henstrand, John M.; McCue, Kent F.; Brink, Kent; Handa, Avtar K.; Herrmann, Klaus M.; Conn, Eric E.

    1992-01-01

    Light and fungal elicitor induce mRNA encoding 3-deoxy-d-arabino-heptulosonate 7-phosphate (DAHP) synthase in suspension cultured cells of parsley (Petroselinum crispum L.). The kinetics and dose response of mRNA accumulation were similar for DAHP synthase and phenylalanine ammonia-lyase (PAL). Six micrograms of elicitor from Phytophthora megasperma f. glycinia gave a detectable induction within 1 hour. Induction of DAHP synthase and PAL mRNAs by light was transient, reaching maximal levels at 4 hours and returning to pretreatment levels after 24 hours. Our data suggest that either light or fungal elicitor transcriptionally activate DAHP synthase. A coordinate regulation for key enzymes in the synthesis of primary and secondary metabolites is indicated. ImagesFigure 1 PMID:16668708

  6. Network level pavement evaluation with 1 mm 3D survey system

    Directory of Open Access Journals (Sweden)

    Kelvin C.P. Wang

    2015-12-01

    Full Text Available The latest iteration of PaveVision3D Ultra can obtain true 1 mm resolution 3D data at full-lane coverage in all 3 directions at highway speed up to 60 mph. This paper introduces the PaveVision3D Ultra technology for rapid network level pavement survey on approximately 1280 center miles of Oklahoma interstate highways. With sophisticated automated distress analyzer (ADA software interface, the collected 1 mm 3D data provide Oklahoma Department of Transportation (ODOT with comprehensive solutions for automated evaluation of pavement surface including longitudinal profile for roughness, transverse profile for rutting, predicted hydroplaning speed for safety analysis, and cracking and various surface defects for distresses. The pruned exact linear time (PELT method, an optimal partitioning algorithm, is implemented to identify change points and dynamically determine homogeneous segments so as to assist ODOT effectively using the available 1 mm 3D pavement surface condition data for decision-making. The application of 1 mm 3D laser imaging technology for network survey is unprecedented. This innovative technology allows highway agencies to access its options in using the 1 mm 3D system for its design and management purposes, particularly to meet the data needs for pavement management system (PMS, pavement ME design and highway performance monitoring system (HPMS.

  7. 1,25-Dihydroxyvitamin-D3 Induces Avian β-Defensin Gene Expression in Chickens.

    Directory of Open Access Journals (Sweden)

    Long Zhang

    Full Text Available Host defense peptides (HDPs play a critical role in innate immunity. Specific modulation of endogenous HDP synthesis by dietary compounds has been regarded as a novel approach to boost immunity and disease resistance in animal production. 1,25-dihydroxy vitamin D3 (1,25D3 is well known as a powerful HDP inducer in humans, but limited information about the effect of 1,25D3 on HDPs in poultry is available. Here, we sought to examine whether 1,25D3 could stimulate avian β-defensin (AvBD expression in chickens. We used chicken embryo intestinal epithelial cells (CEIEPCs and peripheral blood mononuclear cells (PBMCs to study the effect of 1,25D3 on the expression of AvBDs. We observed that 1,25D3 is able to up-regulate the expression of several AvBDs in CEIEPCs and PBMCs, whereas it increased the amounts of AvBD4 mRNA in CEIEPCs only in the presence of lipopolysaccharide (LPS. On the other hand, LPS treatment not only inhibited the expression of CYP24A1 but also altered the expression pattern of VDR in CEIEPCs. Furthermore, AvBDs were not directly regulated by 1,25D3, as cycloheximide completely blocked 1,25D3-induced expression of AvBDs. Our observations suggest that 1,25D3 is capable of inducing AvBD gene expression and is a potential antibiotic alternative through augmentation of host innate immunity as well as disease control in chickens.

  8. A new system for assessment of growth using mandibular canine calcification stages and its correlation with modified MP3 stages.

    Science.gov (United States)

    Hegde, Gautham; Hegde, Nanditha; Kumar, Anil; Keshavaraj

    2014-07-01

    Orthodontic diagnosis and treatment planning for growing children must involve growth prediction, especially in the treatment of skeletal problems. Studies have shown that a strong association exists between skeletal maturity and dental calcification stages. The present study was therefore taken up to provide a simple and practical method for assessing skeletal maturity using a dental periapical film and standard dental X-ray machine, to compare the developmental stages of the mandibular canine with that of developmental stages of modified MP3 and to find out if any correlation exists, to determine if the developmental stages of the mandibular canine alone can be used as a reliable indicator for assessment of skeletal maturity. A total of 160 periapical radiographs, of the mandibular right canine and the MP3 region was taken and assessed according to the Dermirjian's stages of dental calcification and the modified MP3 stages. The correlation coefficient between MP3 stages and developmental stages of mandibular canine was found to be significant in both male and female groups. When the canine calcification stages were compared with the MP3 stages it was found that with the exception of the D stage of canine calcification the remaining stages showed a very high correlation with the modified MP3 stages. The correlation between the mandibular canine calcification stages, and the MP3 stages was found to be significant. The canine calcification could be used as a sole indicator for assessment of skeletal maturity.

  9. Hypoglycemia Secondary to Sulfonylurea Ingestion in a Patient with End Stage Renal Disease: Results from a 72-Hour Fast

    Directory of Open Access Journals (Sweden)

    Alice Abraham

    2015-01-01

    Full Text Available Insulin, proinsulin, and C-peptide levels increase with sulfonylurea exposure but the acuity of increase has not been described in dialysis patients. We present a case of a dialysis patient who presented with hypoglycemia and was found to have accidental sulfonylurea ingestion. This is a 73-year-old man with ESRD on peritoneal dialysis, without history of diabetes, who presented with hypoglycemia. Past medical history includes multiple myeloma, congestive heart failure, and hypertension. At initial presentation, his blood glucose was 47 mg/dL, with concomitant elevations in the following: C-peptide 30.5 (nl: 0.8–3.5 ng/mL, insulin 76 (nl: 3–19 μIU/mL, and proinsulin 83.3 (nl: ≤8.0 pmol/L. During the 72-hour fast, which he completed without hypoglycemia, insulin declined to be within normal limits (to 12 μIU/mL; proinsulin (to 12.1 pmol/L and C-peptide (to 7.2 ng/mL levels decreased but remained elevated. The sulfonylurea screen ultimately returned positive for glipizide, clinching the diagnosis. This is the first reported case which characterizes the chronic elevation of proinsulin in a patient with ESRD, as well as its dramatic increase after a presumed solitary exposure to sulfonylurea. The 72-hour fast conducted gives insight into the clearance of insulin, proinsulin, and C-peptide after sulfonylurea ingestion in ESRD.

  10. 3D ear identification based on sparse representation.

    Directory of Open Access Journals (Sweden)

    Lin Zhang

    Full Text Available Biometrics based personal authentication is an effective way for automatically recognizing, with a high confidence, a person's identity. Recently, 3D ear shape has attracted tremendous interests in research field due to its richness of feature and ease of acquisition. However, the existing ICP (Iterative Closet Point-based 3D ear matching methods prevalent in the literature are not quite efficient to cope with the one-to-many identification case. In this paper, we aim to fill this gap by proposing a novel effective fully automatic 3D ear identification system. We at first propose an accurate and efficient template-based ear detection method. By utilizing such a method, the extracted ear regions are represented in a common canonical coordinate system determined by the ear contour template, which facilitates much the following stages of feature extraction and classification. For each extracted 3D ear, a feature vector is generated as its representation by making use of a PCA-based local feature descriptor. At the stage of classification, we resort to the sparse representation based classification approach, which actually solves an l1-minimization problem. To the best of our knowledge, this is the first work introducing the sparse representation framework into the field of 3D ear identification. Extensive experiments conducted on a benchmark dataset corroborate the effectiveness and efficiency of the proposed approach. The associated Matlab source code and the evaluation results have been made publicly online available at http://sse.tongji.edu.cn/linzhang/ear/srcear/srcear.htm.

  11. Vitamina D y cáncer: acción antineoplásica de la 1α, 25(OH2 -vitamina D3 Vitamin D and cancer: antineoplastic effects of 1α,25(OH2-vitamin D3

    Directory of Open Access Journals (Sweden)

    Verónica González Pardo

    2012-04-01

    Full Text Available La forma hormonalmente activa de la vitamina D, 1α,25(OH2-vitamina D3 (1α,25(OH2D3, además de desempeñar un rol crucial en el mantenimiento de la homeostasis de calcio en el cuerpo, también regula el crecimiento y la diferenciación de diferentes tipos celulares, incluyendo células cancerosas. Actualmente hay numerosos estudios que investigan los efectos de la hormona en estas células, debido al interés en el uso terapéutico del 1α,25(OH2D3 y de análogos con menor actividad calcémica para el tratamiento o prevención del cáncer. En este trabajo de revisión se describe el sistema endocrino de la vitamina D, su mecanismo de acción, su acción antineoplásica y se provee información sobre los últimos avances en el estudio de nuevos análogos de la hormona con menos actividad calcémica para el tratamiento del cáncer.The hormonal form of vitamin D, 1α,25(OH2-vitamin D3 (1α,25(OH2D3, in addition of playing a central role in the control of calcium homeostasis in the body, regulates the growth and differentiation of different cell types, including cancer cells. At present several epidemiologic and clinical studies investigate the effect of the hormone in these cells due to the interest in the therapeutic use of 1α,25(OH2D3 and analogues with less calcemic activity for prevention or treatment of cancer. This review describes vitamin D endocrine system, its mechanism of action, its antineoplastic activity and provides information about the latest advances in the study of new hormone analogues with less calcemic activity for cancer treatment.

  12. Traffic condition with road upgrading during construction and operation stages based on level-of-service (LOS)

    Science.gov (United States)

    Tay, A. C.; Lee, H. H.

    2018-04-01

    In this study, traffic survey was done at signalized intersection of both ends of an upgrading road during morning and afternoon peak hours throughout construction period. The intersections of Tudan Road located at Miri City in Sarawak State, Malaysia were chosen as study sites. The aim of this research was to investigate the traffic condition for the signalized intersections of a R3 secondary road that being upgrading to standard U5 dual carriageway during peak hours for construction and operation stages. Data collected from these sites were analyzed according to Highway Capacity Manual (HCM) 2010. From the results, the level-of-services (LOS) of Kuala Baram By Pass Road intersection improved from Level F to Level E at operation stage for weekday during peak hours in the morning. LOS of Lutong-Kuala Baram Road intersection at construction stage were Level C during peak hours in the morning and Level D during peak hours in the afternoon for weekends. However, the LOS during both peak hours for weekends were projected to improve to Level B at the operation stage. It proved that the road construction has affected LOS, and this temporary issue can be solved after the upgraded road is in operation.

  13. Esophageal motion characteristics in thoracic esophageal cancer: Impact of clinical stage T4 versus stages T1-T3

    Directory of Open Access Journals (Sweden)

    Yuta Kobayashi, MS

    2016-10-01

    Conclusions: The EM and the ITV margins in cT4 were significantly smaller than those in cT1-T3. The NM and the ITV margins of abdominal LNs were much larger than those of cervicothoracic LNs and the esophagus. In clinical radiation therapy planning for esophageal cancer, we should take cT stage into consideration.

  14. Pembuatan Aplikasi Catalog 3D Desain Rumah Sebagai Sarana Promosi Dengan Menggunakan Unity 3D

    Directory of Open Access Journals (Sweden)

    Siryantini Nurul Adnin

    2016-03-01

    Full Text Available This study incorporate AR into a technology home Catalog sales, thus Catalog home is becoming more real with 3D objects in it. This research aims to produce an application that can display a 3D model of a house that can help buyers to know well the home to be purchased, and will simplify the home seller as a media campaign to consumers. 3D objects used to develop two kinds of Software that Sweet Home 3D and Blender, whereas to create application in programming used Unity 3D Software using the C # programming language. Application home design Catalog is made through several stages of design 3D objects, Marker workmanship and application design. The end result consists of two forms, namely in the form of physical (in the form of print media Catalog that contains a marker on some pages and Augmented Reality applications based on Android in the form of .apk which is then installed on Smartphones, where the two are complementary.

  15. Determination of the 3d34d and 3d35s configurations of Fe V

    International Nuclear Information System (INIS)

    Azarov, V.I.

    2001-01-01

    The analysis of the spectrum of four times ionized iron, Fe V, has led to the determination of the 3d 3 4d and 3d 3 5s configurations. From 975 classified lines in the region 645-1190 A we have established 123 of 168 theoretically possible 3d 3 4d levels and 26 of 38 possible 3d 3 5s levels. The estimated accuracy of values of energy levels of these two configurations is about 0.7 cm -1 and 1.0 cm -1 , respectively. The level structure of the system of the 3d 4 , 3d 3 4s, 3d 3 4d and 3d 3 5s configurations has been theoretically interpreted and the energy parameters have been determined by a least squares fit to the observed levels. A comparison of parameters in Cr III and Fe V ions is given. (orig.)

  16. Demonstration of circulating 1,24,25-trihydroxyvitamin D3 in man by radioimmunoassay

    International Nuclear Information System (INIS)

    Clemens, T.L.; Fraher, L.J.; Sandler, L.M.; O'Riordan, J.L.H.

    1982-01-01

    1,24,25-trihydroxyvitamin D 3 has been detected in human serum using a sensitive radioimmunoassay. Tritiated 1,24,25-trihydroxyvitamin D 3 was synthesized biologically and used as tracer to monitor the recovery of endogenous metabolite during isolation from serum. Circulating 1,24,25(OH) 3 D 3 in normal subjects ranged from 9.3 to 18.5 pmol/l but was not detectable ( 3 . (author)

  17. Improving 1D Stellar Models with 3D Atmospheres

    Science.gov (United States)

    Rørsted Mosumgaard, Jakob; Silva Aguirre, Víctor; Weiss, Achim; Christensen-Dalsgaard, Jørgen; Trampedach, Regner

    2017-10-01

    Stellar evolution codes play a major role in present-day astrophysics, yet they share common issues. In this work we seek to remedy some of those by the use of results from realistic and highly detailed 3D hydrodynamical simulations of stellar atmospheres. We have implemented a new temperature stratification extracted directly from the 3D simulations into the Garching Stellar Evolution Code to replace the simplified atmosphere normally used. Secondly, we have implemented the use of a variable mixing-length parameter, which changes as a function of the stellar surface gravity and temperature - also derived from the 3D simulations. Furthermore, to make our models consistent, we have calculated new opacity tables to match the atmospheric simulations. Here, we present the modified code and initial results on stellar evolution using it.

  18. Strong piezoelectric anisotropy d15/d33 in ⟨111⟩ textured Pb(Mg1/3Nb2/3)O3-Pb(Zr,Ti)O3 ceramics

    Science.gov (United States)

    Yan, Yongke; Priya, Shashank

    2015-08-01

    The shear mode piezoelectric properties of Pb(Mg1/3Nb2/3)O3-Pb(Zr,Ti)O3 (PMN-PZT) ceramic with 72% ⟨111⟩ texture were investigated. The piezoelectric anisotropic factor d15/d33 was as high as 8.5 in ⟨111⟩ textured ceramic as compared to 2.0 in random counterpart. The high d15/d33 indicates the "rotator" ferroelectric characteristics of PMN-PZT system and suggests that the large shear piezoelectric response contributes towards the high longitudinal piezoelectric response (d33) in non-polar direction (d33 = 1100 pC/N in ⟨001⟩ textured ceramic vs. d33 = 112 pC/N in ⟨111⟩ textured ceramic).

  19. Cerebral staging of lung cancer: is one single contrast-enhanced T1-weighted three-dimensional gradient-echo sequence sufficient?

    Energy Technology Data Exchange (ETDEWEB)

    Ohana, Mickael; Jeung, Mi-Young; Roy, Catherine [Nouvel Hopital Civil-Hopitaux Universitaires de Strasbourg, Service de Radiologie B/Radiology Department, Strasbourg (France); Bazille, Gauthier [Clinique Saint Anne-Groupe Radiologique MIM, Strasbourg (France)

    2014-08-15

    Gadolinium-enhanced magnetic resonance imaging (MRI) is the gold standard for cerebral staging in thoracic oncology. We hypothesize that a minimalist examination, consisting of a single contrast-enhanced T1-weighted three-dimensional gradient-echo sequence (CE 3D-GRE), would be sufficient for the cerebral staging of nonsymptomatic lung cancer patients. Seventy nonsymptomatic patients (50 % men; 62 years ± 10.2) referred for cerebral staging of a lung cancer were retrospectively included. All underwent a standard 3 T MRI examination with T1, FLAIR, T2* GRE, diffusion, and CE 3D-GRE sequences, for a total examination time of 20 min. The sole CE 3D-GRE (acquisition time: 6 min) was extracted and blindly interpreted by two radiologists in search of brain metastases. Hemorrhagic features of potential lesions and relevant incidental findings were also noted. Discrepant cases were reviewed by a third reader. The full MRI examination and follow-up studies were used as a reference to calculate sensitivity and specificity of the sole CE 3D-GRE. Thirty-eight point six percent (27 out of 70) of the patients had brain metastases. Performances and reader's agreement with the sole CE 3D-GRE sequence were excellent for the diagnosis of brain metastases (sensitivity = 96.3 %, specificity = 100 %, κ = 0.91) and incidental findings (sensitivity = 85.7 %, specificity = 100 %, κ = 0.62) but insufficient for the identification of hemorrhages within the metastases (sensitivity = 33.3 %, specificity = 85.7 %, κ = 0.47). In the specific case of lung cancer, cerebral staging in nonsymptomatic patients can be efficiently achieved with a minimalistic protocol consisting of a single CE 3D-GRE sequence, completed if positive with a T2* sequence for hemorrhagic assessment, thus halving appointment delays. (orig.)

  20. Derivatives of 1,3-oxazolidines on the base of diamino-alcohols

    International Nuclear Information System (INIS)

    Karimov, M.B.; Kimsanov, B.Kh.; Tagaeva, S.E.; Khuseynov, K.B.

    2001-01-01

    In this article authors investigated the reaction of 1-cyclohexyl amino-3-diethyl amino-2-propanol, 1-butylamine-3-diethyl amino-2-propanol. By authors was determined that reaction of initial diamino-alcohols with furfural passing at molar correlation of reagents 1:1 at temperature 20-22 d ig C at presence dehydrating medium-potash during 36 hours

  1. Determination of vitamins D2, D3, K1 and K3 and some hydroxy metabolites of vitamin D3 in plasma using a continuous clean-up-preconcentration procedure coupled on-line with liquid chromatography-UV detection.

    Science.gov (United States)

    Ortiz Boyer, F; Fernández Romero, J M; Luque de Castro, M D; Quesada, J M

    1999-03-01

    A semi-automatic procedure for the continuous clean-up and concentration of several fat-soluble vitamins prior to their separation by HPLC and UV detection is reported. The procedure is based on the use of a minicolumn packed with aminopropylsilica as sorbent located prior to the chromatographic detection system. The overall process was developed and applied to the main liposoluble vitamins (A, D2, D3, E, K1, K3) and several hydroxy metabolites of vitamin D3 [25-(OH)-D3,24,25-(OH)2-D3 and 1,25-(OH)2-D3]. All the analytes were monitored at a compromise wavelength of 270 nm. Calibration graphs were constructed between 0.01 and 100 ng ml-1 for vitamin D2 and D3 and their hydroxy metabolites, between 0.1 and 100 ng ml-1 for vitamin A, K1 and K3 and between 1 and 100 ng ml-1 for vitamin E, with excellent regression coefficients (> or = 0.9901) in all cases. The precision was established at two concentration levels with acceptable RSDs in all instances (between 3.6 and 8.7%). The method was appropriate for the determination of vitamin D2, D3, K1 and K3 and the 24,25-dihydroxy and 25-hydroxy metabolites of vitamin D3 in human plasma. The method was applied to plasma samples spiked with the target analytes and the recoveries ranged between 78 and 109%.

  2. Synthesis of 4-O-glycosylated 1,5-anhydro-D-fructose and of 1,5-anhydro-D-tagatose from a common intermediate 2,3-O-isopropylidene -D-fructose

    DEFF Research Database (Denmark)

    Agoston, Karoly; Dekany, Gyula; Lundt, Inge

    2009-01-01

    Four novel disaccharides of glycosylated 1,5-anhydro-D-ketoses have been prepared: 1,5-anhydro-4-O-b-D-glucopyranosyl-D-fructose, 1,5-anhydro-4-O-b-D-galactopyranosyl-D-fructose, 1,5-anhydro-4-O-b-D-glucopyranosyl-D-tagatose and 1,5-anhydro-4-O-b-D-galactopyranosyl-D-tagatose. The common...... intermediate, 1,5-anhydro-2,3-O-isopropylidene-b-D-fructopyranose, was prepared from D-fructose and converted into the D-tagatose derivative by oxidation followed by stereoselective reduction to the 4-epimer. The prepared anhydro-ketoses were glycosylated and deprotected to the disaccharides....

  3. Synthesis of 4-O-glycosylated 1,5-anhydro-D-fructose and of 1,5-anhydro-D-tagatose from a common intermediate 2,3-O-isopropylidene-D-fructose.

    Science.gov (United States)

    Agoston, Károly; Dékány, Gyula; Lundt, Inge

    2009-05-26

    Four novel disaccharides of glycosylated 1,5-anhydro-D-ketoses have been prepared: 1,5-anhydro-4-O-beta-D-glucopyranosyl-D-fructose, 1,5-anhydro-4-O-beta-D-galactopyranosyl-D-fructose, 1,5-anhydro-4-O-beta-D-glucopyranosyl-D-tagatose, and 1,5-anhydro-4-O-beta-D-galactopyranosyl-D-tagatose. The common intermediate, 1,5-anhydro-2,3-O-isopropylidene-beta-D-fructopyranose, was prepared from D-fructose and was converted into the D-tagatose derivative by oxidation followed by stereoselective reduction to the 4-epimer. The anhydroketoses thus prepared were glycosylated and deprotected to give the disaccharides.

  4. A new system for assessment of growth using mandibular canine calcification stages and its correlation with modified MP3 stages

    Directory of Open Access Journals (Sweden)

    Gautham Hegde

    2014-01-01

    Full Text Available Objective: Orthodontic diagnosis and treatment planning for growing children must involve growth prediction, especially in the treatment of skeletal problems. Studies have shown that a strong association exists between skeletal maturity and dental calcification stages. The present study was therefore taken up to provide a simple and practical method for assessing skeletal maturity using a dental periapical film and standard dental X-ray machine, to compare the developmental stages of the mandibular canine with that of developmental stages of modified MP3 and to find out if any correlation exists, to determine if the developmental stages of the mandibular canine alone can be used as a reliable indicator for assessment of skeletal maturity. Materials and Methods: A total of 160 periapical radiographs, of the mandibular right canine and the MP3 region was taken and assessed according to the Dermirjian′s stages of dental calcification and the modified MP3 stages. Results and Discussion: The correlation coefficient between MP3 stages and developmental stages of mandibular canine was found to be significant in both male and female groups. When the canine calcification stages were compared with the MP3 stages it was found that with the exception of the D stage of canine calcification the remaining stages showed a very high correlation with the modified MP3 stages. Conclusion: The correlation between the mandibular canine calcification stages, and the MP3 stages was found to be significant. The canine calcification could be used as a sole indicator for assessment of skeletal maturity.

  5. A facile route for 3D aerogels from nanostructured 1D and 2D materials

    Science.gov (United States)

    Jung, Sung Mi; Jung, Hyun Young; Dresselhaus, Mildred S.; Jung, Yung Joon; Kong, Jing

    2012-01-01

    Aerogels have numerous applications due to their high surface area and low densities. However, creating aerogels from a large variety of materials has remained an outstanding challenge. Here, we report a new methodology to enable aerogel production with a wide range of materials. The method is based on the assembly of anisotropic nano-objects (one-dimensional (1D) nanotubes, nanowires, or two-dimensional (2D) nanosheets) into a cross-linking network from their colloidal suspensions at the transition from the semi-dilute to the isotropic concentrated regime. The resultant aerogels have highly porous and ultrafine three-dimensional (3D) networks consisting of 1D (Ag, Si, MnO2, single-walled carbon nanotubes (SWNTs)) and 2D materials (MoS2, graphene, h-BN) with high surface areas, low densities, and high electrical conductivities. This method opens up a facile route for aerogel production with a wide variety of materials and tremendous opportunities for bio-scaffold, energy storage, thermoelectric, catalysis, and hydrogen storage applications. PMID:23152940

  6. (E-1-(2-Aminophenyl-3-(benzo[d][1,3]dioxol-5-ylprop-2-en-1-one

    Directory of Open Access Journals (Sweden)

    Rodrigo Abonia

    2016-12-01

    Full Text Available The title chalcone (E-1-(2-aminophenyl-3-(benzo[d][1,3]dioxol-5-ylprop-2-en-1-one was obtained in 76% yield from a NaOH catalyzed Claisen–Schmidt condensation reaction between o-aminoacetophenone and piperonal. This product will be used as a key precursor for the development of an alternative route for the total synthesis of the alkaloid Graveoline. Single crystals of the title compound suitable for X-ray diffraction were grown via slow evaporation in ethanol at room temperature. A complete crystallographic study was performed in depth to unequivocally confirm its structure. The crystal structure of the title o-aminochalcone, C16H13NO3, shows two molecules per asymmetric unit (Z = 4 and adopts an E configuration about the C=C double bond. In the title compound, the mean plane of the non-H atoms of the central chalcone fragment C—C(O—C—C—C is as follow: [root-mean-square (r.m.s. deviation = 0.0210 Å for A–B and 0.0493 for C–D molecules]. In the crystal, molecules are linked by N–H...O and C–H...O, hydrogen bonds forming S(6, R22(6 and edge-fused R44(24rings along with C(18 chains running parallel to (110.

  7. Precipitation Processes developed during ARM (1997), TOGA COARE(1992), GATE(1 974), SCSMEX(1998) and KWAJEX(1999): Consistent 2D and 3D Cloud Resolving Model Simulations

    Science.gov (United States)

    Tao, W.-K.; Shie, C.-H.; Simpson, J.; Starr, D.; Johnson, D.; Sud, Y.

    2003-01-01

    Real clouds and clouds systems are inherently three dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical cloud system with large horizontal domains at the National Center for Atmospheric Research. The results indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D simulations of these same cases. The reason for the strong similarity between the 2D and 3D CRM simulations is that the observed large-scale advective tendencies of potential temperature, water vapor mixing ratio, and horizontal momentum were used as the main forcing in both the 2D and 3D models. Interestingly, the 2D and 3D versions of the CRM used in CSU and U.K. Met Office showed significant differences in the rainfall and cloud statistics for three ARM cases. The major objectives of this project are to calculate and axamine: (1)the surface energy and water budgets, (2) the precipitation processes in the convective and stratiform regions, (3) the cloud upward and downward mass fluxes in the convective and stratiform regions; (4) cloud characteristics such as size, updraft intensity and lifetime, and (5) the entrainment and detrainment rates associated with clouds and cloud systems that developed in TOGA COARE, GATE, SCSMEX, ARM and KWAJEX. Of special note is that the analyzed (model generated) data sets are all produced by the same current version of the GCE model, i.e. consistent model physics and configurations. Trajectory analyse and inert tracer calculation will be conducted to identify the differences and similarities in the organization of convection between simulated 2D and 3D cloud systems.

  8. Two-Stage Regularized Linear Discriminant Analysis for 2-D Data.

    Science.gov (United States)

    Zhao, Jianhua; Shi, Lei; Zhu, Ji

    2015-08-01

    Fisher linear discriminant analysis (LDA) involves within-class and between-class covariance matrices. For 2-D data such as images, regularized LDA (RLDA) can improve LDA due to the regularized eigenvalues of the estimated within-class matrix. However, it fails to consider the eigenvectors and the estimated between-class matrix. To improve these two matrices simultaneously, we propose in this paper a new two-stage method for 2-D data, namely a bidirectional LDA (BLDA) in the first stage and the RLDA in the second stage, where both BLDA and RLDA are based on the Fisher criterion that tackles correlation. BLDA performs the LDA under special separable covariance constraints that incorporate the row and column correlations inherent in 2-D data. The main novelty is that we propose a simple but effective statistical test to determine the subspace dimensionality in the first stage. As a result, the first stage reduces the dimensionality substantially while keeping the significant discriminant information in the data. This enables the second stage to perform RLDA in a much lower dimensional subspace, and thus improves the two estimated matrices simultaneously. Experiments on a number of 2-D synthetic and real-world data sets show that BLDA+RLDA outperforms several closely related competitors.

  9. RAPIDARC (RA) in the uterine cervical cancer; dosimetric gain vs 3D-Crt; RAPIDARC (RA) en el cancer de cervix uterino; ganancia dosimetrica vs 3D-CRT

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, J.; Garcia, B.; Quispe, K.; Gonzales, A.; Marquina, J., E-mail: jose.ramirez@aliada.com.pe [Clinica Aliada, Oncologia Integral, Av. Jose Galvez Barrenechea 1044, San Isidro, Lima (Peru)

    2014-08-15

    This work aims to quantitatively assess RAPIDARC (RA) treatments versus three dimensional-Conformal Radiation Therapy with field to field technique (3D-Crt-Fin F). 11 patients with cervical cancer treated at our institution radically or adjuvant clinical stages I-III B were evaluated. The prescribed dose was 50 Gy (2 Gy / Fr). The RA plans consisted of two isocentric complete arcs and conformational plans of 4 isocentric fields (previous, subsequent, right side and left side) with 3D-Crt-Fin F technique; both cases carried out ??in the Eclipse version 10 planner with calculation algorithm analytical anisotropic algorithm (AAA) and volumetric optimization software (for VMAT plans). Homogeneity indices (Hi), conformity indices (CI) Sigma indices (S-Index), monitor units (MU) and the time required for each treatment were compared. The mean age was 52 years (32-65) of the 11 patients 9 were clinical stages I-II B. The Hi varied from 0.052 for RA to 0.163 for 3D-Crt-Fin F (p = 0.009), and the CI between 1.005 and 1.35 (p = 0.26), the S-index from 1.2 to 3.7 (p = 0.001) and the H-index of 1.08 to 1.15 (p = 0.24). All dose limits in risk organs were met with a significant difference in the RA plans versus 3D-Crt-Fin F. In patients with cervical cancer the treatment plans quality with the indices aforementioned seems to be better with the RA technique, being observed a significant reduction of radiation to surrounding organs. (author)

  10. Crisp Clustering Algorithm for 3D Geospatial Vector Data Quantization

    DEFF Research Database (Denmark)

    Azri, Suhaibah; Anton, François; Ujang, Uznir

    2015-01-01

    In the next few years, 3D data is expected to be an intrinsic part of geospatial data. However, issues on 3D spatial data management are still in the research stage. One of the issues is performance deterioration during 3D data retrieval. Thus, a practical 3D index structure is required for effic...

  11. Effects of 1,25-dihydroxyvitamin D3 and vitamin D3 on the expression of the vitamin D receptor in human skeletal muscle cells

    Science.gov (United States)

    Vitamin D receptor (VDR) expression and action in non-human skeletal muscle have recently been reported in several studies, yet data on the activity and expression of VDR in human muscle cells are scarce. We conducted a series of studies to examine the (1) effect of 1,25-dihydroxyvitamin D3 (1,25(OH...

  12. Efficacy and safety of two ramipril and hydrochlorothiazide fixed-dose combination formulations in adults with stage 1 or stage 2 arterial hypertension evaluated by using ABPM.

    Science.gov (United States)

    Oigman, Wille; Gomes, Marco Antônio Mota; Pereira-Barretto, Antônio Carlos; Póvoa, Rui; Kohlmann, Osvaldo; Rocha, João Carlos; Nobre, Fernando

    2013-05-01

    Fixed-dose combinations of antihypertensive agents demonstrate advantages in terms of efficacy, tolerability, and treatment adherence. This study was designed to compare the efficacy and safety of 2 ramipril and hydrochlorothiazide (HCTZ) fixed-dose combinations in patients with hypertension stage 1 or 2. Patients' blood pressure (BP) profiles were evaluated by using 24-hour ambulatory BP monitoring (ABPM). This was a multicenter, prospective, randomized, open-label, parallel-group, noninferiority trial of adult patients (age ≥18 years) with hypertension stage 1 or 2 and systolic blood pressure (SBP) within 140 to 179 mm Hg or diastolic blood pressure (DBP) 90 to 109 mm Hg. After a 2-week washout period, eligible patients were randomized to receive 1 of 2 ramipril/HCTZ fixed-dose combination formulations (5/25 mg/d) for 8 weeks. The primary end point was the difference in 24-hour ABPM SBP/DBP mean reductions between groups after 8 weeks of treatment. The secondary end points were the changes in daytime and nighttime ABPM and in office BP. Safety profile and tolerability assessments included monitoring of adverse events. A total of 102 patients with hypertension (54 in group A [test formulation] and 48 in group B [reference formulation]), aged 27 to 85 years, completed the 8-week treatment period. The decreases in SBP and DBP according to 24-hour ABPM from baseline to week 8 were significant and similar in both groups. SBP decreased from 149.1 to 133.0 mm Hg (-16.1 mm Hg) in group A and from 146.2 to 130.6 mm Hg in group B (-15.6 mm Hg) (P = 0.8537); DBP was reduced by 8.8 mm Hg in group A and by 8.5 mm Hg in group B (P = 0.8748). Because the lower 95% CI limit for the difference between groups A and B of 3.96 mm Hg in SBP and 3.54 mm Hg in DBP was lower than that preestablished by the trial protocol (4 mm Hg), noninferiority of the test formulation was demonstrated compared with the reference formulation. For the secondary end points, there was no significant

  13. Comparison between 3D and 1D simulations of a regenerative blower for fuel cell applications

    International Nuclear Information System (INIS)

    Badami, M.; Mura, M.

    2012-01-01

    Highlights: ► A hydrogen recirculation blower for automotive fuel cells applications is studied. ► A 3D CFD analysis has been carried out to better understand the internal flows of the machine. ► The CFD results are compared to a 1D model set up by the authors in previous works. ► The main hypotheses put forward for the theoretical 1D model are compatible with the 3D analysis. - Abstract: A 3D Computational Fluid Dynamics (CFD) analysis has been carried out to better understand the internal fluid dynamics of a regenerative blower used for hydrogen recirculation in a Proton Exchange Membrane (PEM), Fuel Cell (FC) utilized for automotive applications. The obtained results are used to highlight the motion of the fluid in the vanes and in the side channel of the machine and to verify the main hypotheses put forward concerning the theoretical 1D model set up by the authors in previous works on the basis of the momentum exchange theory. Finally, the CFD analysis has been used to point out the effect of the slope of the vanes on the performance of the regenerative blower, and the results have been compared with those obtained using of the 1D model.

  14. Precipitation Processes Developed During ARM (1997), TOGA COARE (1992), GATE (1974), SCSMEX (1998), and KWAJEX (1999): Consistent 2D, Semi-3D and 3D Cloud Resolving Model Simulations

    Science.gov (United States)

    Tao, W-K.

    2003-01-01

    Real clouds and cloud systems are inherently three-dimensional (3D). Because of the limitations in computer resources, however, most cloud-resolving models (CRMs) today are still two-dimensional (2D). A few 3D CRMs have been used to study the response of clouds to large-scale forcing. In these 3D simulations, the model domain was small, and the integration time was 6 hours. Only recently have 3D experiments been performed for multi-day periods for tropical cloud systems with large horizontal domains at the National Center for Atmospheric Research (NACAR) and at NASA Goddard Space Flight Center . At Goddard, a 3D Goddard Cumulus Ensemble (GCE) model was used to simulate periods during TOGA COARE, SCSMEX and KWAJEX using 512 by 512 km domain (with 2 km resolution). The results indicate that surface precipitation and latent heating profiles are very similar between the 2D and 3D GCE model simulations. The reason for the strong similarity between the 2D and 3D CRM simulations is that the same observed large-scale advective tendencies of potential temperature, water vapor mixing ratio, and horizontal momentum were used as the main focusing in both the 2D and 3D models. Interestingly, the 2D and 3D versions of the CRM used at CSU showed significant differences in the rainfall and cloud statistics for three ARM cases. The major objectives of this paper are: (1) to assess the performance of the super-parameterization technique, (2) calculate and examine the surface energy (especially radiation) and water budgets, and (3) identify the differences and similarities in the organization and entrainment rates of convection between simulated 2D and 3D cloud systems.

  15. Enhanced radiosensitivity in 1,25-dihydroxyvitamin D3 deficient mice

    International Nuclear Information System (INIS)

    Zhang Zengli; Ding Xiaofei; Tong Jian; Li Bingyan

    2011-01-01

    To investigate whether impaired osteogenesis resulting from vitamin D deficiency can influence hematopoiesis recovery after radiation, the 25-hydroxyvitamin D-1α-hydroxylase (1α-hydroxylase) gene knockout (KO) mice and wild type (WT) mice were subjected to different doses of gamma ray. The survival rates, peripheral blood cell counts and bone marrow cellularity were studied after irradiation (IR). The survival rates of the KO mice were significantly lower than that of WT mice after 6 or 8 Gy dose of radiation. The recovery of white blood cells in KO mice was significantly delayed compared with that in WT mice after radiation. The red blood cell number in WT mice was observed to increase more than that in KO mice at days 14 and 28 after radiation. The nadir platelet count in KO mice was nearly half of that in WT mice. Dramatically higher bone marrow cell numbers were found in WT mice compared with KO mice. Our findings demonstrate the enhanced radiosensitivity in 1,25-dihydroxyvitamin D3 (1,25-(OH) 2 D 3 ) deficient mice. (author)

  16. Data of evolutionary structure change: 1RAAA-3GD5D [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1RAAA-3GD5D 1RAA 3GD5 A D ANPLYQKHIISINDLSRDDLNLVLATAAKLKANPQPELL...RDPFEAARGAHILYTDVWTHRLQLFEQYQINAAL-----------LNC--AAAEAIVLHCLPAHRGEEITDEVMEGPRSRI... 0 1RAA A 1RAAA...RAA A 1RAAA P...ine> 1RAA A 1RAAA

  17. 3-D Whole-Core Transport Calculation with 3D/2D Rotational Plane Slicing Method

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Han Jong; Cho, Nam Zin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-10-15

    Use of the method of characteristics (MOC) is very popular due to its capability of heterogeneous geometry treatment and widely used for 2-D core calculation, but direct extension of MOC to 3-D core is not so attractive due to huge calculational cost. 2-D/1-D fusion method was very successful for 3-D calculation of current generation reactor types (highly heterogeneous in radial direction but piece-wise homogeneous in axial direction). In this paper, 2-D MOC concept is extended to 3-D core calculation with little modification of an existing 2-D MOC code. The key idea is to suppose 3-D geometry as a set of many 2-D planes like a phone-directory book. Dividing 3-D structure into a large number of 2-D planes and solving each plane with a simple 2-D SN transport method would give the solution of a 3-D structure. This method was developed independently at KAIST but it is found that this concept is similar with that of 'plane tracing' in the MCCG-3D code. The method developed was tested on the 3-D C5G7 OECD/NEA benchmark problem and compared with the 2-D/1-D fusion method. Results show that the proposed method is worth investigating further. A new approach to 3-D whole-core transport calculation is described and tested. By slicing 3-D structure along characteristic planes and solving each 2-D plane problem, we can get 3-D solution. The numerical test results indicate that the new method is comparable with the 2D/1D fusion method and outperforms other existing methods. But more fair comparison should be done in similar discretization level.

  18. A 240W Monolithic Class-D Audio Amplifier Output Stage

    DEFF Research Database (Denmark)

    Nyboe, Flemming; Kaya, Cetin; Risbo, Lars

    2006-01-01

    A single-channel class-D audio amplifier output stage outputs 240W undipped into 4Omega 0.1% open-loop THD+N allows using the device in a fully-digital audio signal path with no feedback. The output current capability is plusmn18A and the part is fabricated in a 0.4mum/1.8mum high-voltage Bi...

  19. Transfer factor of "9"0Sr and "1"3"7Cs to lettuce and winter wheat at different growth stage applications

    International Nuclear Information System (INIS)

    Al Attar, Lina; Al-Oudat, Mohammad; Safia, Bassam; Ghani, Basem Abdul

    2015-01-01

    The effect of clay soil contamination time on the transfer factors (F_vs) of "1"3"7Cs and "9"0Sr was investigated in four different growth stages of winter wheat and lettuce crops. The experiment was performed in an open field using lysimeters. The F_vs were the ratio of the activity concentrations of the radionuclides in crops to those in soil, both as dry weight (Bq kg"−"1). Significant difference of log-F_vs was evaluated using one-way Analysis of Variance (ANOVA). Basically, F_vs of "9"0Sr were higher than those of "1"3"7Cs, despite of the application stage or crop' variety. Higher F_vs for both radionuclides were observed for lettuce in comparison to winter wheat. F_vs of "9"0Sr showed comparable trends for both crops with enhanced F_vs obtained when contamination occurred in early stages, i.e. 1.20 for lettuce and 0.88 and 0.02 for winter wheat, straw and grains, respectively. Despite the fluctuation noted in the pattern of F_vs for "1"3"7Cs, soil contaminated at the second stage gave the highest F_vs for lettuce and grains, with geometric means of 0.21 and 0.01, respectively. However, wheat-straw showed remarkable increase in F_v for the latest contamination (ripening stage), about 0.06. It could be concluded that soil contamination at early growth stages would represent high radiological risk for the scenarios studied with an exception to "1"3"7Cs in winter wheat-straw which reflected greater hazard at the latest application. - Highlights: • Higher TFs for both radionuclides were observed for leafy plant in comparison to cereals. • Despite the growth stages & plants' variety, TFs of "9"0Sr were always higher than those of "1"3"7Cs. • TFs of "9"0Sr showed comparable trends in both crops and were higher at earlier growth stages. • Fluctuation noted in TFs for "1"3"7Cs in lettuce with higher TFs at second contamination-stage. • High TFs for "1"3"7Cs when contamination occurred at the latest growth stage of wheat vegetative.

  20. Final Hazard Categorization and Auditable Safety Analysis for the Remediation of the 118-D-1, 118-D-2, 118-D-3, 118-H-1, 118-H-2 and 118-H-3 Solid Waste Burial Grounds

    Energy Technology Data Exchange (ETDEWEB)

    T. J. Rodovsky

    2006-03-01

    This report presents the initial hazard categorization, final hazard categorization and auditable safety analysis for the remediation of the 118-D-1, 118-D-2, and 118-D-3 Burial Grounds located within the 100-D/DR Area of the Hanford Site and the 118-H-1, 118-H-2, and 118-H-3 Burial Grounds located within the 100-H Area of the Hanford Site.

  1. Antidepressants differentially related to 1,25-(OH)(2) vitamin D(3) and 25-(OH) vitamin D(3) in late-life depression

    NARCIS (Netherlands)

    Oude Voshaar, R.C.; Derks, W.J.; Comijs, H.C.; Schoevers, R.A.; Borst, M.H. de; Marijnissen, R.M.

    2014-01-01

    A low plasma 25-OH vitamin D3 level is a universal risk factor for a wide range of diseases and has also been implicated in late-life depression. It is currently unknown whether the biologically active form of vitamin D, that is, 1,25-(OH)2 vitamin D3, is also decreased in late-life depression, or

  2. Antidepressants differentially related to 1,25-(OH)(2) vitamin D-3 and 25-(OH) vitamin D-3 in late-life depression

    NARCIS (Netherlands)

    Oude Voshaar, R C; Derks, W J; Comijs, H C; Schoevers, R A; de Borst, M H; Marijnissen, R M

    2014-01-01

    A low plasma 25-OH vitamin D-3 level is a universal risk factor for a wide range of diseases and has also been implicated in late-life depression. It is currently unknown whether the biologically active form of vitamin D, that is, 1,25-(OH)(2) vitamin D-3, is also decreased in late-life depression,

  3. 3-D conformal HDR brachytherapy as monotherapy for localized prostate cancer. A pilot study

    International Nuclear Information System (INIS)

    Martin, T.; Baltas, D.; Kurek, R.; Roeddiger, S.; Kontova, M.; Anagnostopoulos, G.; Skazikis, G.; Zamboglou, N.; Dannenberg, T.; Buhleier, T.; Tunn, U.

    2004-01-01

    Purpose: pilot study to evaluate feasibility, acute toxicity and conformal quality of three-dimensional (3-D) conformal high-dose-rate (HDR) brachytherapy as monotherapy for localized prostate cancer using intraoperative real-time planning. Patients and methods: between 05/2002 and 05/2003, 52 patients with prostate cancer, prostate-specific antigen (PSA) ≤ 10 ng/ml, Gleason score ≤ 7 and clinical stage ≤ T2a were treated. Median PSA was 6.4 ng/ml and median Gleason score 5. 24/52 patients had stage T1c and 28/52 stage T2a. For transrectal ultrasound-(TRUS-)guided transperineal implantation of flexible plastic needles into the prostate, the real-time HDR planning system SWIFT trademark was used. After implantation, CT-based 3-D postplanning was performed. All patients received one implant for four fractions of HDR brachytherapy in 48 h using a reference dose (D ref ) of 9.5 Gy to a total dose of 38.0 Gy. Dose-volume histograms (DVHs) were analyzed to evaluate the conformal quality of each implant using D 90 , D 10 urethra, and D 10 rectum. Acute toxicity was evaluated using the CTC (common toxicity criteria) scales. Results: median D 90 was 106% of D ref (range: 93-115%), median D 10 urethra 159% of D ref (range: 127-192%), and median D 10 rectum 55% of D ref (range: 35-68%). Median follow-up is currently 8 months. In 2/52 patients acute grade 3 genitourinary toxicity was observed. No gastrointestinal toxicity > grade 1 occurred. Conclusion: 3-D conformal HDR brachytherapy as monotherapy using intraoperative real-time planning is a feasible and highly conformal treatment for localized prostate cancer associated with minimal acute toxicity. Longer follow-up is needed to evaluate late toxicity and biochemical control. (orig.)

  4. A germline mutation in the BRCA1 3'UTR predicts Stage IV breast cancer.

    Science.gov (United States)

    Dorairaj, Jemima J; Salzman, David W; Wall, Deirdre; Rounds, Tiffany; Preskill, Carina; Sullivan, Catherine A W; Lindner, Robert; Curran, Catherine; Lezon-Geyda, Kim; McVeigh, Terri; Harris, Lyndsay; Newell, John; Kerin, Michael J; Wood, Marie; Miller, Nicola; Weidhaas, Joanne B

    2014-06-10

    A germline, variant in the BRCA1 3'UTR (rs8176318) was previously shown to predict breast and ovarian cancer risk in women from high-risk families, as well as increased risk of triple negative breast cancer. Here, we tested the hypothesis that this variant predicts tumor biology, like other 3'UTR mutations in cancer. The impact of the BRCA1-3'UTR-variant on BRCA1 gene expression, and altered response to external stimuli was tested in vitro using a luciferase reporter assay. Gene expression was further tested in vivo by immunoflourescence staining on breast tumor tissue, comparing triple negative patient samples with the variant (TG or TT) or non-variant (GG) BRCA1 3'UTR. To determine the significance of the variant on clinically relevant endpoints, a comprehensive collection of West-Irish breast cancer patients were tested for the variant. Finally, an association of the variant with breast screening clinical phenotypes was evaluated using a cohort of women from the High Risk Breast Program at the University of Vermont. Luciferase reporters with the BRCA1-3'UTR-variant (T allele) displayed significantly lower gene expression, as well as altered response to external hormonal stimuli, compared to the non-variant 3'UTR (G allele) in breast cancer cell lines. This was confirmed clinically by the finding of reduced BRCA1 gene expression in triple negative samples from patients carrying the homozygous TT variant, compared to non-variant patients. The BRCA1-3'UTR-variant (TG or TT) also associated with a modest increased risk for developing breast cancer in the West-Irish cohort (OR=1.4, 95% CI 1.1-1.8, p=0.033). More importantly, patients with the BRCA1-3'UTR-variant had a 4-fold increased risk of presenting with Stage IV disease (p=0.018, OR=3.37, 95% CI 1.3-11.0). Supporting that this finding is due to tumor biology, and not difficulty screening, obese women with the BRCA1-3'UTR-variant had significantly less dense breasts (p=0.0398) in the Vermont cohort. A variant in

  5. GSK-3 Inhibition Sensitizes Acute Myeloid Leukemia Cells to 1,25D-Mediated Differentiation

    Science.gov (United States)

    Gupta, Kalpana; Stefan, Tammy; Ignatz-Hoover, James; Moreton, Stephen; Parizher, Gary; Saunthararajah, Yogen; Wald, David N.

    2017-01-01

    1,25-dihydroxyvitamin D3 (1,25D), the biologically active form of vitamin D, is widely considered a promising therapy for acute myeloid leukemia (AML) based on its ability to drive differentiation of leukemic cells. However, clinical trials have been disappointing in part to dose-limiting hypercalcemia. Here we show how inhibiting glycogen synthase kinase 3 (GSK3) can improve the differentiation response of AML cells to 1,25D-mediated differentiation. GSK3 inhibition in AML cells enhanced the differentiating effects of low concentrations of 1,25D. In addition, GSK3 inhibition augmented the ability of 1,25D to induce irreversible growth inhibition and slow the progression of AML in mouse models. Mechanistic studies revealed that GSK3 inhibition led to the hyperphosphorylation of the vitamin D receptor (VDR), enabling an interaction between VDR and the coactivator, SRC-3 (NCOA3), thereby increasing transcriptional activity. We also found that activation of JNK-mediated pathways in response to GSK3 inhibition contributed to the potentiation of 1,25D-induced differentiation. Taken together, our findings offer a preclinical rationale to explore the repositioning of GSK3 inhibitors to enhance differentiation-based therapy for AML treatment. PMID:26964622

  6. P3-1: Ophthalmologic Factors Influencing Asthenopia with Watching 3D Displays

    Directory of Open Access Journals (Sweden)

    Sungwook Wee

    2012-10-01

    Full Text Available Purpose: To identify ophthalmologic factors influencing asthenopia while watching 3D displays. Methods: 30 adult subjects without ophthalmologic abnormality watched the same 3D displays for 30 minutes. Each subject's far and near visual acuity, near points of accommodation and convergence, amplitude of fusional convergence and divergence, stereopsis, angle of phoric deviation, tear break-up time, and temperature of ocular surface before and after watching 3D displays were measured. And surveys for subjective symptoms right after watching 3D displays were conducted. The above-mentioned experiments were performed equally with 2D displays for detection of innate influence of 3D displays. Results: The near points of accommodation and convergence were significantly changed after watching 3D displays (p < .05 compared to 2D displays. And all 10 subjective symptoms were significantly increased after watching 3D displays (p < .05. Conclusion: The accommodation and binocular vergence are predominant ophthalmologic factors that might influence asthenopia significantly while watching 3D displays. Subjective visual discomfort significantly increases with watching 3D displays, and more specific evaluation should be added for detecting the practically related factors with asthenopia.

  7. Elevated 1-hour postload plasma glucose levels identify subjects with normal glucose tolerance but impaired β-cell function, insulin resistance, and worse cardiovascular risk profile: the GENFIEV study.

    Science.gov (United States)

    Bianchi, Cristina; Miccoli, Roberto; Trombetta, Maddalena; Giorgino, Francesco; Frontoni, Simona; Faloia, Emanuela; Marchesini, Giulio; Dolci, Maria A; Cavalot, Franco; Cavallo, Gisella; Leonetti, Frida; Bonadonna, Riccardo C; Del Prato, Stefano

    2013-05-01

    In subjects with normal glucose tolerance (NGT) 1-hour postload plasma glucose (1-h oral glucose tolerance test [OGTT]) of >155 mg/dL predicts type 2 diabetes (T2DM) and is associated with subclinical atherosclerosis. The purpose of this study was to evaluate β-cell function, insulin resistance, and cardiovascular risk profile in subjects with NGT with a 1-h OGTT glucose of >155 mg/dL. The GENFIEV (Genetics, PHYsiopathology, and Evolution of Type 2 diabetes) study is a multicenter study recruiting individuals at high risk of T2DM. A total of 926 subjects underwent a 75-g OGTT for assessment of plasma glucose and C-peptide for mathematical modeling of β-cell function (derivative and proportional control). Fasting insulin, lipid profile, and clinical parameters were determined as well. A 1-hour OGTT glucose of >155 mg/dL was found in 39% of subjects with NGT, 76% with impaired fasting glucose (IFG), 90% with impaired glucose tolerance (IGT), and 99% and 98% with IFG + IGT or newly diagnosed T2DM, respectively. Among subjects with NGT (n = 474), those with 1-hour OGTT glucose of >155 mg/dL were more insulin-resistant and had worse β-cell function than those with 1-hour OGTT glucose of ≤155 mg/dL. Moreover, glycosylated hemoglobin, blood pressure, low-density lipoprotein cholesterol, and triglycerides were higher in subjects with NGT with 1-hour OGTT glucose of >155 mg/dL, whereas high-density lipoprotein cholesterol was lower compared with that in subjects with NGT with 1-hour OGTT glucose of ≤155 mg/dL. Compared with subjects with IGT, those with NGT with 1-hour OGTT glucose of >155 mg/dL had comparable cardiovascular risk profile and insulin resistance but slightly better β-cell function. Among subjects with NGT, those with 1-hour OGTT glucose of >155 mg/dL showed lower insulin sensitivity, impaired β-cell function, and worse cardiovascular risk profile and therefore are at greater risk of developing T2DM and cardiovascular disease.

  8. Radiosensitivity of different immature stages and ages of oriental fruitfly, Dacus Dorsalis Hendel, to gamma radiation

    International Nuclear Information System (INIS)

    Manoto, E.C.; Blanco, L.R.; Resilva, S.S.; Baturi, E.S.

    1980-05-01

    A study was conducted to determine the sensitivity of different ages of eggs, larvae and pupae of the oriental fruitfly to varying doses of gamma radiation. The most sensitive stage was the egg followed by the pupa and then the larva. Radiosensitivity of the eggs decreased as age increased from 2-3 to 28 hours during treatment. The LD 50 for younger eggs (2-13 hours) was less than 0.5 krad and for nearly mature eggs (18-28 hours) from 2.3 to 14.9 krad. Similarly with the larval stage, the LD 50 values increased with age of fruit flies at treatment. For 1-day-old larvae, the LD 50 was observed at 2.5 krad while for 7-day-old larvae, the LD 50 increased to 50 krad. Dosage required for 50% mortality in 1-day-old pupae was 1.4 krad and 32.1 krad for older pupae. Pupation was reduced to zero when 4-day-old larvae were exposed at 50 krad and 1-day-old larvae at 10 krad. More than 50 krad was required to prevent emergence of mature (7-day-old) pupae. The sex ratio of the emerging adults of D. dorsalis from the irradiated pupae assumed a 1:1 ratio. However, some adults had abnormally-developed wings upon emergence. Abnormality rates were greater when the pupae were treated young. Results indicate the feasibility of gamma radiation in the range of 40-50 krad for commodity treatments of fruits. (author)

  9. 3D 14N/1H Double Quantum/1H Single Quantum Correlation Solid-State NMR for Probing Parallel and Anti-Parallel Beta-Sheet Arrangement of Oligo-Peptides at Natural Abundance.

    Science.gov (United States)

    Hong, You-Lee; Asakura, Tetsuo; Nishiyama, Yusuke

    2018-05-08

    β-sheet structure of oligo- and poly-peptides can be formed in anti-parallel (AP)- and parallel (P)-structure, which is the important feature to understand the structures. In principle, P- and AP-β-sheet structures can be identified by the presence (AP) and absence (P) of the interstrand 1HNH/1HNH correlations on a diagonal in 2D 1H double quantum (DQ)/1H single quantum (SQ) spectrum due to the different interstrand 1HNH/1HNH distances between these two arrangements. However, the 1HNH/1HNH peaks overlap to the 1HNH3+/1HNH3+ peaks, which always give cross peaks regardless of the β-sheet arrangement. The 1HNH3+/1HNH3+ peaks disturb the observation of the presence/absence of 1HNH/1HNH correlations and the assignment of 1HNH and 1HNH3+ is not always available. Here, 3D 14N/1H DQ/1H SQ correlation solid-state NMR experiments at fast magic angle spinning (70 kHz) are introduced to distinguish AP and P β-sheet structure. The 14N dimension allows the separate observation of 1HNH/1HNH peaks from 1HNH3+/1HNH3+ peaks with clear assignment of 1HNH and 1HNH3+. In addition, the high natural abundance of 1H and 14N enables 3D 14N/1H DQ/1H SQ experiments of oligo-alanines (Ala3-6) in four hours without any isotope labelling. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. 1,25(OH)2D3 and Ca-binding protein in fetal rats: Relationship to the maternal vitamin D status

    International Nuclear Information System (INIS)

    Verhaeghe, J.; Thomasset, M.; Brehier, A.; Van Assche, F.A.; Bouillon, R.

    1988-01-01

    The autonomy and functional role of fetal 1,25-dihydroxyvitamin D 3 [1,25(OH) 2 D 3 ] were investigated in nondiabetic and diabetic BB rats fed diets containing 0.85% calcium-0.7% phosphorus or 0.2% calcium and phosphorus and in semistarved rats on the low calcium-phosphorus diet. The changes in maternal and fetal plasma 1,25(OH) 2 D 3 were similar: the levels were increased by calcium-phosphorus restriction and decreased by diabetes and semistarvation. Maternal and fetal 1,25(OH) 2 D 3 levels were correlated. The vitamin D-dependent calcium-binding proteins (CaBP 9K and CaBP 28K ) were measured in multiple maternal and fetal tissues and in the placenta of nondiabetic, diabetic, and calcium-phosphorus-restricted rats. The distributions of CaBP 9K and CaBP 28K in the pregnant rat were similar to that of the growing rat. The increased maternal plasma 1,25(OH) 2 D 3 levels in calcium-phosphorus-restricted rats were associated with higher duodenal CaBP 9K and renal CaBPs, but placental CaBP 9K was not different. In diabetic pregnant rats, duodenal CaBP 9K was not different. In diabetic pregnant rats, duodenal CaBP 9K tended to be lower, while renal CaBPs were normal; placental CaBP 9K was decreased. The results indicate that in the rat fetal 1,25(OH) 2 D 3 depends on maternal 1,25(OH) 2 D 3 or on factors regulating maternal 1,25(OH) 2 D 3 . The lack of changes in fetal CaBP in the presence of altered fetal plasma 1,25(OH) 2 D 3 levels confirms earlier data showing that 1,25(H) 2 D 3 has a limited hormonal function during perinatal development in the rat

  11. Experimental and Computational Studies of the Superconducting Phase Transition of Quasi 1D Superconductors

    Science.gov (United States)

    Wong, Chi Ho

    In this PhD project, the feasibility of establishing a state with vanishing resistance in quasi-1D superconductors are studied. In the first stage, extrinsic quasi-1D superconductors based on composite materials made by metallic nanowire arrays embedded in mesoporous silica substrates, such as Pb-SBA-15 and NbN-SBA-15 (fabricated by a Chemical Vapor Deposition technique) are investigated. Two impressive outcomes in Pb-SBA-15 are found, including an enormous enhancement of the upper critical field from 0.08T to 14T and an increase of the superconducting transition temperature onset s from 7.2 to 11K. The second stage is to apply Monte Carlo simulations to model the quasi-1D superconductor, considering its penetration depth, coherence length, defects, electron mean free path, tunneling barrier and insulating width between the nanowires. The Monte Carlo results provide a clear picture to approach to stage 3, which represents a study of the intrinsic quasi-1D superconductor Sc3CoC4, which contains parallel arrays of 1D superconducting CoC4 ribbons with weak transverse Josephson or Proximity interaction, embedded in a Sc matrix. According to our previous work, a BKT transition in the lateral plane is believed to be the physics behind the vanishing resistance of quasi-1D superconductors, because it activates a dimensional crossover from a 1D fluctuating superconductivity at high temperature to a 3D bulk phase coherent state in the entire material at low temperatures. Moreover, we decided to study thin 1D Sn nanowires without substrate, which display very similar superconducting properties to Pb-SBA-15 with a strong critical field and Tc enhancement. Finally, a preliminary research on a novel quasi-2D superconductor formed by parallel 2D mercury sheets that are separated by organic molecules is presented. The latter material may represent a model system to study the effect of a layered structure, which is believed to be an effective ingredient to design high temperature

  12. Stability and accuracy of 3D neutron transport simulations using the 2D/1D method in MPACT

    International Nuclear Information System (INIS)

    Collins, Benjamin; Stimpson, Shane; Kelley, Blake W.; Young, Mitchell T.H.; Kochunas, Brendan; Graham, Aaron; Larsen, Edward W.; Downar, Thomas; Godfrey, Andrew

    2016-01-01

    A consistent “2D/1D” neutron transport method is derived from the 3D Boltzmann transport equation, to calculate fuel-pin-resolved neutron fluxes for realistic full-core Pressurized Water Reactor (PWR) problems. The 2D/1D method employs the Method of Characteristics to discretize the radial variables and a lower order transport solution to discretize the axial variable. This paper describes the theory of the 2D/1D method and its implementation in the MPACT code, which has become the whole-core deterministic neutron transport solver for the Consortium for Advanced Simulations of Light Water Reactors (CASL) core simulator VERA-CS. Several applications have been performed on both leadership-class and industry-class computing clusters. Results are presented for whole-core solutions of the Watts Bar Nuclear Power Station Unit 1 and compared to both continuous-energy Monte Carlo results and plant data.

  13. Stability and accuracy of 3D neutron transport simulations using the 2D/1D method in MPACT

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Benjamin, E-mail: collinsbs@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Stimpson, Shane, E-mail: stimpsonsg@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States); Kelley, Blake W., E-mail: kelleybl@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Young, Mitchell T.H., E-mail: youngmit@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Kochunas, Brendan, E-mail: bkochuna@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Graham, Aaron, E-mail: aarograh@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Larsen, Edward W., E-mail: edlarsen@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Downar, Thomas, E-mail: downar@umich.edu [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI 48109 (United States); Godfrey, Andrew, E-mail: godfreyat@ornl.gov [Oak Ridge National Laboratory, One Bethel Valley Rd., Oak Ridge, TN 37831 (United States)

    2016-12-01

    A consistent “2D/1D” neutron transport method is derived from the 3D Boltzmann transport equation, to calculate fuel-pin-resolved neutron fluxes for realistic full-core Pressurized Water Reactor (PWR) problems. The 2D/1D method employs the Method of Characteristics to discretize the radial variables and a lower order transport solution to discretize the axial variable. This paper describes the theory of the 2D/1D method and its implementation in the MPACT code, which has become the whole-core deterministic neutron transport solver for the Consortium for Advanced Simulations of Light Water Reactors (CASL) core simulator VERA-CS. Several applications have been performed on both leadership-class and industry-class computing clusters. Results are presented for whole-core solutions of the Watts Bar Nuclear Power Station Unit 1 and compared to both continuous-energy Monte Carlo results and plant data.

  14. 3D-Reconstructions and Virtual 4D-Visualization to Study Metamorphic Brain Development in the Sphinx Moth Manduca Sexta.

    Science.gov (United States)

    Huetteroth, Wolf; El Jundi, Basil; El Jundi, Sirri; Schachtner, Joachim

    2010-01-01

    DURING METAMORPHOSIS, THE TRANSITION FROM THE LARVA TO THE ADULT, THE INSECT BRAIN UNDERGOES CONSIDERABLE REMODELING: new neurons are integrated while larval neurons are remodeled or eliminated. One well acknowledged model to study metamorphic brain development is the sphinx moth Manduca sexta. To further understand mechanisms involved in the metamorphic transition of the brain we generated a 3D standard brain based on selected brain areas of adult females and 3D reconstructed the same areas during defined stages of pupal development. Selected brain areas include for example mushroom bodies, central complex, antennal- and optic lobes. With this approach we eventually want to quantify developmental changes in neuropilar architecture, but also quantify changes in the neuronal complement and monitor the development of selected neuronal populations. Furthermore, we used a modeling software (Cinema 4D) to create a virtual 4D brain, morphing through its developmental stages. Thus the didactical advantages of 3D visualization are expanded to better comprehend complex processes of neuropil formation and remodeling during development. To obtain datasets of the M. sexta brain areas, we stained whole brains with an antiserum against the synaptic vesicle protein synapsin. Such labeled brains were then scanned with a confocal laser scanning microscope and selected neuropils were reconstructed with the 3D software AMIRA 4.1.

  15. tavg3_3d_chm_Ne: MERRA Chem 3D IAU C-Grid Edge Mass Flux, Time Average 3-Hourly 0.667 x 0.5 degree V5.2.0 (MAT3NECHM) at GES DISC

    Data.gov (United States)

    National Aeronautics and Space Administration — The MAT3NECHM or tavg3_3d_chm_Ne data product is the MERRA Data Assimilation System Chemistry 3-Dimensional chemistry on layer Edges that is time averaged, 3D model...

  16. Lossless Geometry Compression Through Changing 3D Coordinates into 1D

    Directory of Open Access Journals (Sweden)

    Yongkui Liu

    2013-08-01

    Full Text Available A method of lossless geometry compression on the coordinates of the vertexes for grid model is presented. First, the 3D coordinates are pre-processed to be transformed into a specific form. Then these 3D coordinates are changed into 1D data by making the three coordinates of a vertex represented by only a position number, which is made of a large integer. To minimize the integers, they are sorted and the differences between two adjacent vertexes are stored in a vertex table. In addition to the technique of geometry compression on coordinates, an improved method for storing the compressed topological data in a facet table is proposed to make the method more complete and efficient. The experimental results show that the proposed method has a better compression rate than the latest method of lossless geometry compression, the Isenburg-Lindstrom-Snoeyink method. The theoretical analysis and the experiment results also show that the important decompression time of the new method is short. Though the new method is explained in the case of a triangular grid, it can also be used in other forms of grid model.

  17. Improved l1-SPIRiT using 3D walsh transform-based sparsity basis.

    Science.gov (United States)

    Feng, Zhen; Liu, Feng; Jiang, Mingfeng; Crozier, Stuart; Guo, He; Wang, Yuxin

    2014-09-01

    l1-SPIRiT is a fast magnetic resonance imaging (MRI) method which combines parallel imaging (PI) with compressed sensing (CS) by performing a joint l1-norm and l2-norm optimization procedure. The original l1-SPIRiT method uses two-dimensional (2D) Wavelet transform to exploit the intra-coil data redundancies and a joint sparsity model to exploit the inter-coil data redundancies. In this work, we propose to stack all the coil images into a three-dimensional (3D) matrix, and then a novel 3D Walsh transform-based sparsity basis is applied to simultaneously reduce the intra-coil and inter-coil data redundancies. Both the 2D Wavelet transform-based and the proposed 3D Walsh transform-based sparsity bases were investigated in the l1-SPIRiT method. The experimental results show that the proposed 3D Walsh transform-based l1-SPIRiT method outperformed the original l1-SPIRiT in terms of image quality and computational efficiency. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. SORCE XPS Level 3 Solar Spectral Irradiance 6-Hour Means V010

    Data.gov (United States)

    National Aeronautics and Space Administration — The SORCE XUV Photometer System (XPS) Solar Spectral Irradiance (SSI) 6-Hour Data Product SOR3XPS6 contains solar XUV irradiances in the 0.1 to 27 nm range, as well...

  19. Nb 3d and O 1s core levels and chemical bonding in niobates

    International Nuclear Information System (INIS)

    Atuchin, V.V.; Kalabin, I.E.; Kesler, V.G.; Pervukhina, N.V.

    2005-01-01

    A set of available experimental data on binding energies of Nb 3d 5/2 and O 1s core levels in niobates has been observed with using energy difference (O 1s-Nb 3d 5/2 ) as a robust parameter for compound characterization. An empirical relationship between (O 1s-Nb 3d 5/2 ) values measured with XPS for Nb 5+ -niobates and mean chemical bond length L(Nb-O) has been discussed. A range of (O 1s-Nb 3d 5/2 ) values possible in Nb 5+ -niobates has been defined. An energy gap ∼1.4-1.8 eV is found between (O 1s-Nb 3d 5/2 ) values reasonable for Nb 5+ and Nb 4+ states in niobates

  20. Fume emissions from a low-cost 3-D printer with various filaments.

    Science.gov (United States)

    Floyd, Evan L; Wang, Jun; Regens, James L

    2017-07-01

    3-D printing is an additive manufacturing process involving the injection of melted thermoplastic polymers, which are then laid down in layers to achieve a pre-designed shape. The heated deposition process raises concerns of potential aerosol and volatile organic compounds (VOC) emission and exposure. The decreasing cost of desktop 3-D printers has made the use of 3-D printers more acceptable in non-industrial workplaces lacking sufficient ventilation. Meanwhile, little is known about the characteristics of 3-D printing fume emission. The objective of this study was to characterize aerosols and VOC emissions generated from various filaments used with a low-cost 3-D printer in an environmental testing chamber. A pre-designed object was printed in 1.25 hours using eight types of filaments. A scanning mobility particle sizer and an aerodynamic particle sizer were employed to measure the particle size distribution in sub-half-micron fraction (printers due to high respirablity, especially if used in settings without proper guidance and engineering control.

  1. H/D exchange in the reaction of D2 with Bis(triphenyl phosphite)(acetylacetonato)rhodium(I), Rh(P(OPh)3)2(acac)

    International Nuclear Information System (INIS)

    Whitmore, B.C.; Eisenberg, R.

    1984-01-01

    The reaction of Rh(P)OPh) 3 ) 2 (acac) (1) with D 2 benzene has been studied by 1 H NMR spectroscopy, and complex 1 has been found to undergo H/D exchange at the ortho positions of the coordinated phosphite ligands and at the central methine position of the acetylacetonate ligand. At 75 0 C, the exchange reaction proceeds with the extent of deuterium incorporation into P(OPh) 3 being the same as that into acac at all stages of the H/D exchange process. At 60 0 C, deuterium incorporation into P(OPh) 3 is initially more rapid than that into the acac ligand. The initial rate of deuterium incorporation into P(OPh) 3 by 1 in benzene-d 6 under D 2 at 60 0 C proceeds with a first-order rate constant of 9.6 x 10 -5 s -1 . A mechanism for this exchange process is proposed. 13 references, 3 figures, 2 tables

  2. Physiological red cell, 2,3-diphosphoglycerate increase by the sixth hour after birth.

    Science.gov (United States)

    Barretto, O C; Nonoyama, K; Deutsch, A D; Ramos, J L

    1995-01-01

    As the available hemoglobin A1 at birth ranges from 20 to 30% a possible mechanism to favor oxygen release to the tissues could be a decrease of hemoglobin A1 affinity to oxygen. This may be accomplished by an increase in blood pH soon after birth and by an elevation in red cell 2,3-diphosphoglycerate (2,3-DPG). This hypothesis is supported by Valleri and Hirsch, who described a rapid 2,3-DPG recovery of transfused depleted 2,3-DPG red cells. That being so, we carried out this current study by assaying the 2,3-DPG of cord blood from 22 newborns and at 6, 24 and 72 hours after birth, as well as those enzymes assumed to be envolved in the 2,3-DPG levels regulation. 2,3-DPG (nmoles g-1 Hb) demonstrated the following values: cord blood: 9,770 +/- 1,026; 6h: 12,773 +/- 1,726; 72 h: 11,990 +/- 728, unveiling a distinct behavior of a sharp increase of 30% by the sixth hour. This confirmed our hypothesis. Regarding the metabolic mechanisms which can account for the 2,3-DPG increase, besides the rise of blood pH, we detected a significant decrease of the 2,3-DPG phosphatase activity, which might diminish the 2,3-DPG breakdown.

  3. "3D fusion" echocardiography improves 3D left ventricular assessment: comparison with 2D contrast echocardiography.

    Science.gov (United States)

    Augustine, Daniel; Yaqub, Mohammad; Szmigielski, Cezary; Lima, Eduardo; Petersen, Steffen E; Becher, Harald; Noble, J Alison; Leeson, Paul

    2015-02-01

    Three-dimensional fusion echocardiography (3DFE) is a novel postprocessing approach that utilizes imaging data acquired from multiple 3D acquisitions. We assessed image quality, endocardial border definition, and cardiac wall motion in patients using 3DFE compared to standard 3D images (3D) and results obtained with contrast echocardiography (2DC). Twenty-four patients (mean age 66.9 ± 13 years, 17 males, 7 females) undergoing 2DC had three, noncontrast, 3D apical volumes acquired at rest. Images were fused using an automated image fusion approach. Quality of the 3DFE was compared to both 3D and 2DC based on contrast-to-noise ratio (CNR) and endocardial border definition. We then compared clinical wall-motion score index (WMSI) calculated from 3DFE and 3D to those obtained from 2DC images. Fused 3D volumes had significantly improved CNR (8.92 ± 1.35 vs. 6.59 ± 1.19, P echocardiography (1.06 ± 0.09 vs. 1.07 ± 0.15, P = 0.69), whereas unfused images produced significantly more variable results (1.19 ± 0.30). This was confirmed by a better intraclass correlation coefficient (ICC 0.72; 95% CI 0.32-0.88) relative to comparisons with unfused images (ICC 0.56; 95% CI 0.02-0.81). 3DFE significantly improves left ventricular image quality compared to unfused 3D in a patient population and allows noncontrast assessment of wall motion that approaches that achieved with 2D contrast echocardiography. © 2014, Wiley Periodicals, Inc.

  4. A 3D view of the outflow in the Orion Molecular Cloud 1 (OMC-1)

    DEFF Research Database (Denmark)

    Nissen, H.D.; Cunningham, N.J.; Sherson, Maiken Gustafsson

    2012-01-01

    and proper motion data for near-IR emission of molecular hydrogen to obtain the first 3-dimensional (3D) structure of the OMC-1 outflow. Our work illustrates a new diagnostic tool for studies of star formation that will be exploited in the near future with the advent of high spatial resolution spectro...... Observatory, the Anglo-Australian Observatory and the Subaru Telescope. These data give the 3D velocity of ejecta yielding a 3D reconstruction of the outflows. This allows one to view the material from different vantage points in space giving considerable insight into the geometry. Our analysis indicates......The fast outflow emerging from a region associated with massive star formation in the Orion Molecular Cloud 1 (OMC-1), located behind the Orion Nebula, appears to have been set in motion by an explosive event. Here we study the structure and dynamics of outflows in OMC-1. We combine radial velocity...

  5. BETHSY 9.1b Test Calculation with TRACE Using 3D Vessel Component

    International Nuclear Information System (INIS)

    Berar, O.; Prosek, A.

    2012-01-01

    Recently, several advanced multidimensional computational tools for simulating reactor system behaviour during real and hypothetical transient scenarios were developed. One of such advanced, best-estimate reactor systems codes is TRAC/RELAP Advanced Computational Engine (TRACE), developed by the U.S. Nuclear Regulatory Commission. The advanced TRACE comes with a graphical user interface called SNAP (Symbolic Nuclear Analysis Package). It is intended for pre- and post-processing, running codes, RELAP5 to TRACE input deck conversion, input deck database generation etc. The TRACE code is still not fully development and it will have all the capabilities of RELAP5. The purpose of the present study was therefore to assess the 3D capability of the TRACE on BETHSY 9.1b test. The TRACE input deck was semi-converted (using SNAP and manual corrections) from the RELAP5 input deck. The 3D fluid dynamics within reactor vessel was modelled and compared to 1D fluid dynamics. The 3D calculation was compared both to TRACE 1D calculation and RELAP5 calculation. Namely, the geometry used in TRACE is basically the same, what gives very good basis for the comparison of the codes. The only exception is 3D reactor vessel model in case of TRACE 3D calculation. The TRACE V5.0 Patch 1 and RELAP5/MOD3.3 Patch 4 were used for calculations. The BETHSY 9.1b test (International Standard Problem no. 27 or ISP-27) was 5.08 cm equivalent diameter cold leg break without high pressure safety injection and with delayed ultimate procedure. BETHSY facility was a 3-loop replica of a 900 MWe FRAMATOME pressurized water reactor. For better presentation of the calculated physical phenomena and processes, an animation model using SNAP was developed. In general, the TRACE 3D code calculation is in good agreement with the BETHSY 9.1b test. The TRACE 3D calculation results are as good as or better than the RELAP5 calculated results. Also, the TRACE 3D calculation is not significantly different from TRACE 1D

  6. Nb 3d and O 1s core levels and chemical bonding in niobates

    Energy Technology Data Exchange (ETDEWEB)

    Atuchin, V.V. [Laboratory of Optical Materials and Structures, Institute of Semiconductor Physics, SB RAS, Novosibirsk 630090 (Russian Federation)]. E-mail: atuchin@thermo.isp.nsc.ru; Kalabin, I.E. [Laboratory of Optical Materials and Structures, Institute of Semiconductor Physics, SB RAS, Novosibirsk 630090 (Russian Federation); Kesler, V.G. [Technical Center, Institute of Semiconductor Physics, SB RAS, Novosibirsk 630090 (Russian Federation); Pervukhina, N.V. [Laboratory of Crystal Chemistry, Institute of Inorganic Chemistry, SB RAS, Novosibirsk 630090 (Russian Federation)

    2005-02-01

    A set of available experimental data on binding energies of Nb 3d{sub 5/2} and O 1s core levels in niobates has been observed with using energy difference (O 1s-Nb 3d{sub 5/2}) as a robust parameter for compound characterization. An empirical relationship between (O 1s-Nb 3d{sub 5/2}) values measured with XPS for Nb{sup 5+}-niobates and mean chemical bond length L(Nb-O) has been discussed. A range of (O 1s-Nb 3d{sub 5/2}) values possible in Nb{sup 5+}-niobates has been defined. An energy gap {approx}1.4-1.8 eV is found between (O 1s-Nb 3d{sub 5/2}) values reasonable for Nb{sup 5+} and Nb{sup 4+} states in niobates.

  7. A 240W Monolithic Class-D Audio Amplifier Output Stage

    OpenAIRE

    Nyboe, Flemming; Kaya, Cetin; Risbo, Lars; Andreani, Pietro

    2006-01-01

    A single-channel class-D audio amplifier output stage outputs 240W undipped into 4Omega 0.1% open-loop THD+N allows using the device in a fully-digital audio signal path with no feedback. The output current capability is plusmn18A and the part is fabricated in a 0.4mum/1.8mum high-voltage BiCMOS process. Over-current sensing protects the output from short circuits.

  8. HLA-DRB1*15:01-DQA1*01:02-DQB1*06:02 Haplotype Protects Autoantibody-Positive Relatives From Type 1 Diabetes Throughout the Stages of Disease Progression.

    Science.gov (United States)

    Pugliese, Alberto; Boulware, David; Yu, Liping; Babu, Sunanda; Steck, Andrea K; Becker, Dorothy; Rodriguez, Henry; DiMeglio, Linda; Evans-Molina, Carmella; Harrison, Leonard C; Schatz, Desmond; Palmer, Jerry P; Greenbaum, Carla; Eisenbarth, George S; Sosenko, Jay M

    2016-04-01

    The HLA-DRB1*15:01-DQA1*01:02-DQB1*06:02 haplotype is linked to protection from the development of type 1 diabetes (T1D). However, it is not known at which stages in the natural history of T1D development this haplotype affords protection. We examined a cohort of 3,358 autoantibody-positive relatives of T1D patients in the Pathway to Prevention (PTP) Study of the Type 1 Diabetes TrialNet. The PTP study examines risk factors for T1D and disease progression in relatives. HLA typing revealed that 155 relatives carried this protective haplotype. A comparison with 60 autoantibody-negative relatives suggested protection from autoantibody development. Moreover, the relatives with DRB1*15:01-DQA1*01:02-DQB1*06:02 less frequently expressed autoantibodies associated with higher T1D risk, were less likely to have multiple autoantibodies at baseline, and rarely converted from single to multiple autoantibody positivity on follow-up. These relatives also had lower frequencies of metabolic abnormalities at baseline and exhibited no overall metabolic worsening on follow-up. Ultimately, they had a very low 5-year cumulative incidence of T1D. In conclusion, the protective influence of DRB1*15:01-DQA1*01:02-DQB1*06:02 spans from autoantibody development through all stages of progression, and relatives with this allele only rarely develop T1D. © 2016 by the American Diabetes Association. Readers may use this article as long as the work is properly cited, the use is educational and not for profit, and the work is not altered.

  9. 1D to 3D dimensional crossover in the superconducting transition of the quasi-one-dimensional carbide superconductor Sc3CoC4.

    Science.gov (United States)

    He, Mingquan; Wong, Chi Ho; Shi, Dian; Tse, Pok Lam; Scheidt, Ernst-Wilhelm; Eickerling, Georg; Scherer, Wolfgang; Sheng, Ping; Lortz, Rolf

    2015-02-25

    The transition metal carbide superconductor Sc(3)CoC(4) may represent a new benchmark system of quasi-one-dimensional (quasi-1D) superconducting behavior. We investigate the superconducting transition of a high-quality single crystalline sample by electrical transport experiments. Our data show that the superconductor goes through a complex dimensional crossover below the onset T(c) of 4.5 K. First, a quasi-1D fluctuating superconducting state with finite resistance forms in the [CoC(4)](∞) ribbons which are embedded in a Sc matrix in this material. At lower temperature, the transversal Josephson or proximity coupling of neighboring ribbons establishes a 3D bulk superconducting state. This dimensional crossover is very similar to Tl(2)Mo(6)Se(6), which for a long time has been regarded as the most appropriate model system of a quasi-1D superconductor. Sc(3)CoC(4) appears to be even more in the 1D limit than Tl(2)Mo(6)Se(6).

  10. Cell cycle regulation by the Wee1 Inhibitor PD0166285, Pyrido [2,3-d] pyimidine, in the B16 mouse melanoma cell line

    International Nuclear Information System (INIS)

    Hashimoto, Osamu; Shinkawa, Masako; Torimura, Takuji; Nakamura, Toru; Selvendiran, Karuppaiyah; Sakamoto, Masaharu; Koga, Hironori; Ueno, Takato; Sata, Michio

    2006-01-01

    Wee1 kinase plays a critical role in maintaining G2 arrest through its inhibitory phosphorylation of cdc2. In previous reports, a pyridopyrimidine molecule PD0166285 was identified to inhibit Wee1 activity at nanomolar concentrations. This G2 checkpoint abrogation by PD0166285 was demonstrated to kill cancer cells, there at a toxic highest dose of 0.5 μM in some cell lines for exposure periods of no longer than 6 hours. The deregulated cell cycle progression may have ultimately damaged the cancer cells. We herein report one of the mechanism by which PD0166285 leads to cell death in the B16 mouse melanoma cell line. Tumor cell proliferation was determined by counting cell numbers. Cell cycle distribution was determined by flow cytometry. Morphogenesis analysis such as microtubule stabilization, Wee1 distribution, and cyclin B location were observed by immunofluorescence confocal microscopy. An immunoblot analysis of cdc2-Tyr15, cyclin D, E, p16, 21, 27, and Rb. A real-time PCR of the mRNA of cyclin D were completed. In our experiment, B16 cells also dramatically abrogated the G2 checkpoint and were found to arrest in the early G1 phase by treatment with 0.5 μM for 4 hours observed by flow cytometry. Cyclin D mRNA decreased within 4 hours observed by Real-time PCR. Rb was dephosphrylated for 24 hours. However, B16 cells did not undergo cell death after 0.5 μM treatment for 24 hours. Immnofluoscence microscopy showed that the cells become round and small in the morphogenesis. More interesting phenomena were that microtubule stabilization was blocked, and Wee1 distribution was restricted after treatment for 4 hours. We analyzed the effect of Wee1 inhibitor PD0166285 described first by Wang in the G2 transition in the B16 melanoma cell line. The inhibitor PD0166285 abrogated G2/M checkpoint inducing early cell division. Moreover, we found that the treatment of cells with the inhibitor is related to microtubule stabilization and decrease in cyclin D transcription

  11. Three dimensional CT angiography (3D-CTA) in ruptured aneurysm surgery on acute stage

    International Nuclear Information System (INIS)

    Matsumoto, Masato; Endo, Yuji; Nakano, Masayuki

    1998-01-01

    We evaluated three-dimensional CT angiography (3D-CTA) for the treatment of acutely ruptured cerebral aneurysms. Sixty patients with subarachnoid hemorrhage from cerebral aneurysms were investigated both by 3D-CTA and conventional angiography and 26 patients were studied using 3D-CTA without conventional angiography. In the 60 cases, both 3D-CTA and the conventional angiography revealed 100% accuracy in diagnosing ruptured aneurysms, and 3D-CTA and the conventional angiography showed 96% and 92% accuracy for unruptured aneurysms respectively. 3D-CTA was equal or superior to the conventional angiography. Based on these data, since December, 1996, we have operated on 26 consecutive patients with ruptured aneurysms located in the anterior circulation of the circle of Willis, using 3D-CTA without conventional angiography. Thirty-one aneurysms, including 5 associated unruptured aneurysms, were visualized by 3D-CTA and verified at surgery. All aneurysms were clipped successfully. We think that it will be possible to operate on most ruptured aneurysms using only 3D-CTA without the conventional angiography except for the cases of the following situations: if a cerebral infarction is present, conventional angiography is required to evaluate for a stenotic or occlusive lesion of the intracranial arteries, cervical carotid, or vertebral arteries; in cases of giant or large aneurysms, the dynamic information provided by the conventional angiography is needed in case bypass surgery is necessary; and for aneurysms close to bony structures, such as an internal carotid-ophthalmic artery aneurysm, conventional angiography is necessary. (author)

  12. The role of 1-D and 3-D radiative heating in the organization of shallow cumulus convection and the formation of cloud streets

    Science.gov (United States)

    Jakub, Fabian; Mayer, Bernhard

    2017-11-01

    The formation of shallow cumulus cloud streets was historically attributed primarily to dynamics. Here, we focus on the interaction between radiatively induced surface heterogeneities and the resulting patterns in the flow. Our results suggest that solar radiative heating has the potential to organize clouds perpendicular to the sun's incidence angle. To quantify the extent of organization, we performed a high-resolution large-eddy simulation (LES) parameter study. We varied the horizontal wind speed, the surface heat capacity, the solar zenith and azimuth angles, and radiative transfer parameterizations (1-D and 3-D). As a quantitative measure we introduce a simple algorithm that provides a scalar quantity for the degree of organization and the alignment. We find that, even in the absence of a horizontal wind, 3-D radiative transfer produces cloud streets perpendicular to the sun's incident direction, whereas the 1-D approximation or constant surface fluxes produce randomly positioned circular clouds. Our reasoning for the enhancement or reduction of organization is the geometric position of the cloud's shadow and its corresponding surface fluxes. Furthermore, when increasing horizontal wind speeds to 5 or 10 m s-1, we observe the development of dynamically induced cloud streets. If, in addition, solar radiation illuminates the surface beneath the cloud, i.e., when the sun is positioned orthogonally to the mean wind field and the solar zenith angle is larger than 20°, the cloud-radiative feedback has the potential to significantly enhance the tendency to organize in cloud streets. In contrast, in the case of the 1-D approximation (or overhead sun), the tendency to organize is weaker or even prohibited because the shadow is cast directly beneath the cloud. In a land-surface-type situation, we find the organization of convection happening on a timescale of half an hour. The radiative feedback, which creates surface heterogeneities, is generally diminished for large

  13. The role of 1-D and 3-D radiative heating in the organization of shallow cumulus convection and the formation of cloud streets

    Directory of Open Access Journals (Sweden)

    F. Jakub

    2017-11-01

    Full Text Available The formation of shallow cumulus cloud streets was historically attributed primarily to dynamics. Here, we focus on the interaction between radiatively induced surface heterogeneities and the resulting patterns in the flow. Our results suggest that solar radiative heating has the potential to organize clouds perpendicular to the sun's incidence angle. To quantify the extent of organization, we performed a high-resolution large-eddy simulation (LES parameter study. We varied the horizontal wind speed, the surface heat capacity, the solar zenith and azimuth angles, and radiative transfer parameterizations (1-D and 3-D. As a quantitative measure we introduce a simple algorithm that provides a scalar quantity for the degree of organization and the alignment. We find that, even in the absence of a horizontal wind, 3-D radiative transfer produces cloud streets perpendicular to the sun's incident direction, whereas the 1-D approximation or constant surface fluxes produce randomly positioned circular clouds. Our reasoning for the enhancement or reduction of organization is the geometric position of the cloud's shadow and its corresponding surface fluxes. Furthermore, when increasing horizontal wind speeds to 5 or 10 m s−1, we observe the development of dynamically induced cloud streets. If, in addition, solar radiation illuminates the surface beneath the cloud, i.e., when the sun is positioned orthogonally to the mean wind field and the solar zenith angle is larger than 20°, the cloud-radiative feedback has the potential to significantly enhance the tendency to organize in cloud streets. In contrast, in the case of the 1-D approximation (or overhead sun, the tendency to organize is weaker or even prohibited because the shadow is cast directly beneath the cloud. In a land-surface-type situation, we find the organization of convection happening on a timescale of half an hour. The radiative feedback, which creates surface heterogeneities, is

  14. Solvent-free porous framework resulted from 3D entanglement of 1D zigzag coordination polymer

    KAUST Repository

    Kole, Goutam Kumar Umar; Cairns, Amy J.; Eddaoudi, Mohamed; Vittal, Jagadese J.

    2010-01-01

    A solvent-free porous metal organic framework is constructed by the 3D entanglement of 1D zigzag coordination polymeric chains. The role of solvents and the effect of reaction conditions on such unique entanglement are addressed. © 2010 The Royal

  15. Caveolin-1 mediated radioresistance of 3D grown pancreatic cancer cells

    International Nuclear Information System (INIS)

    Hehlgans, Stephanie; Eke, Iris; Storch, Katja; Haase, Michael; Baretton, Gustavo B.; Cordes, Nils

    2009-01-01

    Background and purpose: Resistance of pancreatic ductal adenocarcinoma (PDAC) to chemo- and radiotherapy is a major obstacle. The integral membrane protein Caveolin-1 (Cav-1) has been suggested as a potent target in human pancreatic carcinoma cells. Materials and methods: Human pancreatic tumor cells were examined in a three-dimensional (3D) cell culture model with regard to clonogenic survival, apoptosis, radiogenic DNA-double strand breaks and protein expression and phosphorylation under siRNA-mediated knockdown of Cav-1 without and in combination with irradiation (X-rays, 0-6 Gy). Immunohistochemistry was used to assess Cav-1 expression in biopsies from patients with PDAC. Results: Tumor cells in PDAC showed significantly higher Cav-1 expression relative to tumor stroma. Cav-1 knockdown significantly reduced β1 integrin expression and Akt phosphorylation, induced Caspase 3- and Caspase 8-dependent apoptosis and enhanced the radiosensitivity of 3D cell cultures. While cell cycling and Cav-1 promoter activity remained stable, Cav-1 knockdown-induced radiosensitization correlated with elevated numbers of residual DNA-double strand breaks. Conclusions: Our data strongly support the concept of Cav-1 as a potent target in pancreatic carcinoma cells due to radiosensitization and Cav-1 overexpression in tumor cells of PDAC. 3D cell cultures are powerful and useful tools for the testing of novel targeting strategies to optimize conventional radio- and chemotherapy regimes for PDAC.

  16. A 205 Hour Krypton Propellant Life Test of the SPT-100 Operating at 3 kW

    Science.gov (United States)

    2013-09-01

    nominal xenon condition (1.35 kW), tests have validated the SPT -100 life time as exceeding 2.71 million N -s (equivalent to approximately 9,000 hours of...condition – If correlation between erosion and energy throughput holds, SPT may be able to endure • Long term life test would be required to validate Kr as...shift (to zero center of SPT at r = 0) • Small rotation to correct for linear stage sag DISTRIBUTION A: Approved for public release; distribution

  17. [Comparison of dietary survey, frequency and 24 hour urinary Na methods in evaluation of salt intake in the population].

    Science.gov (United States)

    Li, Jianhong; Lu, Zilong; Yan, Liuxia; Zhang, Jiyu; Tang, Junli; Cai, Xiaoning; Guo, Xiaolei; Ma, Jixiang; Xu, Aiqiang

    2014-12-01

    To compare the difference and correlation between dietary salt intakes assessed by 24 hours urinary Na method, food weighted record method and food frequency questionnaire method. All 2 184 subjects aged 18 to 69 were selected by multi stage stratified cluster random sampling method in Shandong province in June to September, 2011. Dietary salt intakes were measured by 24 hours urinary Na method, food weighted record method and food frequency questionnaire method. The information on gender, age, dining locations and labour intensity of members dining at home for 3 days were recorded. And the dietary habits were surveyed by questionnaire. Salt intakes were 14.0, 12.0 and 10.5 g/d assessed by 24 hours urinary Na method, food weighted record method and food frequency questionnaire, respectively. Comparing with 24 hours urinary Na method, salt intakes assessed by food weighted record method and food frequency questionnaire method were 2.0 g (14.3% undervalued) and 3.4 g (24.3% undervalued) less, respectively. Comparing with 24 hours urinary Na method, the proportion of individuals with salt intake over-reported and under-reported were 42.4% (856/2 020) and 55.3% (1 117/2 020) by food weighted record method, and were 20.7% (418/2 020) and 16.3% (329/2 020) by food frequency questionnaire method, respectively; the proportion of individuals with salt intakes within ± 25% of 24 hours urinary Na method were 36.9% (745/2 020) and 28.4% (574/2 020), respectively. Salt intakes assessed by 24 hours urinary method correlated significantly with both salt intakes assessed by food weighted record method and food frequency questionnaire method; the correlation coefficients were 0.13 and 0.07, respectively. With the increasing of salt intakes by subjects' self-judgment, salt intakes were all rising significantly using three survey methods. Salt intakes of three group population of light, moderate and partial taste salty were 13.6, 13.6 and 14.7 g/d by 24 hours urinary Na method (F

  18. Which are the cut-off values of 2D-Shear Wave Elastography (2D-SWE) liver stiffness measurements predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method?

    Energy Technology Data Exchange (ETDEWEB)

    Sporea, Ioan, E-mail: isporea@umft.ro; Bota, Simona, E-mail: bota_simona1982@yahoo.com; Gradinaru-Taşcău, Oana, E-mail: bluonmyown@yahoo.com; Şirli, Roxana, E-mail: roxanasirli@gmail.com; Popescu, Alina, E-mail: alinamircea.popescu@gmail.com; Jurchiş, Ana, E-mail: ana.jurchis@yahoo.com

    2014-03-15

    Introduction: To identify liver stiffness (LS) cut-off values assessed by means of 2D-Shear Wave Elastography (2D-SWE) for predicting different stages of liver fibrosis, considering Transient Elastography (TE) as the reference method. Methods: Our prospective study included 383 consecutive subjects, with or without hepatopathies, in which LS was evaluated by means of TE and 2D-SWE. To discriminate between various stages of fibrosis by TE we used the following LS cut-offs (kPa): F1-6, F2-7.2, F3-9.6 and F4-14.5. Results: The rate of reliable LS measurements was similar for TE and 2D-SWE: 73.9% vs. 79.9%, p = 0.06. Older age and higher BMI were associated for both TE and 2D-SWE with the impossibility to obtain reliable LS measurements. Reliable LS measurements by both elastographic methods were obtained in 65.2% of patients. A significant correlation was found between TE and 2D-SWE measurements (r = 0.68). The best LS cut-off values assessed by 2D-SWE for predicting different stages of liver fibrosis were: F ≥ 1: >7.1 kPa (AUROC = 0.825); F ≥ 2: >7.8 kPa (AUROC = 0.859); F ≥ 3: >8 kPa (AUROC = 0.897) and for F = 4: >11.5 kPa (AUROC = 0.914). Conclusions: 2D-SWE is a reliable method for the non-invasive evaluation of liver fibrosis, considering TE as the reference method. The accuracy of 2D-SWE measurements increased with the severity of liver fibrosis.

  19. 3D DNA Origami Crystals.

    Science.gov (United States)

    Zhang, Tao; Hartl, Caroline; Frank, Kilian; Heuer-Jungemann, Amelie; Fischer, Stefan; Nickels, Philipp C; Nickel, Bert; Liedl, Tim

    2018-05-18

    3D crystals assembled entirely from DNA provide a route to design materials on a molecular level and to arrange guest particles in predefined lattices. This requires design schemes that provide high rigidity and sufficiently large open guest space. A DNA-origami-based "tensegrity triangle" structure that assembles into a 3D rhombohedral crystalline lattice with an open structure in which 90% of the volume is empty space is presented here. Site-specific placement of gold nanoparticles within the lattice demonstrates that these crystals are spacious enough to efficiently host 20 nm particles in a cavity size of 1.83 × 10 5 nm 3 , which would also suffice to accommodate ribosome-sized macromolecules. The accurate assembly of the DNA origami lattice itself, as well as the precise incorporation of gold particles, is validated by electron microscopy and small-angle X-ray scattering experiments. The results show that it is possible to create DNA building blocks that assemble into lattices with customized geometry. Site-specific hosting of nano objects in the optically transparent DNA lattice sets the stage for metamaterial and structural biology applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. RELAP5-3D Developmental Assessment: Comparison of Versions 4.2.1i and 4.1.3i

    Energy Technology Data Exchange (ETDEWEB)

    Bayless, Paul D. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-06-01

    Figures have been generated comparing the parameters used in the developmental assessment of the RELAP5-3D code using versions 4.2.1i and 4.1.3i. The figures, which are the same as those used in Volume III of the RELAP5-3D code manual, compare calculations using the semi-implicit solution scheme with available experiment data. These figures provide a quick, visual indication of how the code predictions changed between these two code versions and can be used to identify cases in which the assessment judgment may need to be changed in Volume III of the code manual. Changes to the assessment judgments made after reviewing all of the assessment cases are also provided.

  1. 1,25D3 enhances antitumor activity of gemcitabine and cisplatin in human bladder cancer models

    Science.gov (United States)

    Ma, Yingyu; Yu, Wei-Dong; Trump, Donald L.; Johnson, Candace S.

    2010-01-01

    Background 1,25 dihydroxyvitamin D3 (1,25D3) potentiates the cytotoxic effects of several common chemotherapeutic agents. The combination of gemcitabine and cisplatin (GC) is a current standard chemotherapy regimen for bladder cancer. We investigated whether 1,25D3 could enhance the antitumor activity of GC in bladder cancer model systems. Methods Human bladder cancer T24 and UMUC3 cells were pretreated with 1,25D3 followed by GC. Apoptosis were assessed by annexin V staining. Caspase activation was examined by immunoblot analysis and substrate-based caspase activity assay. The cytotoxic effects were examined using MTT and in vitro clonogenic assay. p73 protein levels were assessed by immunoblot analysis. Knockdown of p73 was achieved by siRNA. The in vivo antitumor activity was assessed by in vivo excision clonogenic assay and tumor regrowth delay in the T24 xenograft model. Results 1,25D3 pretreatment enhanced GC-induced apoptosis and the activities of caspases- 8, 9 and 3 in T24 and UMUC3 cells. 1,25D3 synergistically reduced GC-suppressed surviving fraction in T24 cells. 1,25D3, gemcitabine, or cisplatin induced p73 accumulation, which was enhanced by GC or 1,25D3 and GC. p73 expression was lower in human primary bladder tumor tissue compared with adjacent normal tissue. Knockdown of p73 increased clonogenic capacity of T24 cells treated with 1,25D3, GC or 1,25D3 and GC. 1,25D3 and GC combination enhanced tumor regression compared with 1,25D3 or GC alone. Conclusions 1,25D3 potentiates GC-mediated growth inhibition in human bladder cancer models in vitro and in vivo, which involves p73 induction and apoptosis. PMID:20564622

  2. Ubiquitination and degradation of the hominoid-specific oncoprotein TBC1D3 is regulated by protein palmitoylation

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Chen; Lange, Jeffrey J.; Samovski, Dmitri [Department of Cell Biology and Physiology, Washington University School of Medicine, St. Louis, MO 63110 (United States); Su, Xiong [Department of Internal Medicine, Center for Human Nutrition Washington University School of Medicine, St. Louis, MO 63110 (United States); Liu, Jialiu [Department of Cell Biology and Physiology, Washington University School of Medicine, St. Louis, MO 63110 (United States); Sundaresan, Sinju [Department of Internal Medicine, Center for Human Nutrition Washington University School of Medicine, St. Louis, MO 63110 (United States); Stahl, Philip D., E-mail: pstahl@wustl.edu [Department of Cell Biology and Physiology, Washington University School of Medicine, St. Louis, MO 63110 (United States)

    2013-05-03

    Highlights: •Hominoid-specific oncogene TBC1D3 is targeted to plasma membrane by palmitoylation. •TBC1D3 is palmitoylated on two cysteine residues: 318 and 325. •TBC1D3 palmitoylation governs growth factors-induced TBC1D3 degradation. •Post-translational modifications may regulate oncogenic properties of TBC1D3. -- Abstract: Expression of the hominoid-specific oncoprotein TBC1D3 promotes enhanced cell growth and proliferation by increased activation of signal transduction through several growth factors. Recently we documented the role of CUL7 E3 ligase in growth factors-induced ubiquitination and degradation of TBC1D3. Here we expanded our study to discover additional molecular mechanisms that control TBC1D3 protein turnover. We report that TBC1D3 is palmitoylated on two cysteine residues: 318 and 325. The expression of double palmitoylation mutant TBC1D3:C318/325S resulted in protein mislocalization and enhanced growth factors-induced TBC1D3 degradation. Moreover, ubiquitination of TBC1D3 via CUL7 E3 ligase complex was increased by mutating the palmitoylation sites, suggesting that depalmitoylation of TBC1D3 makes the protein more available for ubiquitination and degradation. The results reported here provide novel insights into the molecular mechanisms that govern TBC1D3 protein degradation. Dysregulation of these mechanisms in vivo could potentially result in aberrant TBC1D3 expression and promote oncogenesis.

  3. 17 CFR 402.2d - Appendix D-Modification of § 240.15c3-1d of this title, relating to satisfactory subordination...

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Appendix D-Modification of § 240.15c3-1d of this title, relating to satisfactory subordination agreements, for purposes of § 402.2...—Modification of § 240.15c3-1d of this title, relating to satisfactory subordination agreements, for purposes of...

  4. cis- and trans-2,3,3a,4,5,9b-Hexahydro-1H-benz[e]indoles: synthesis and evaluation of dopamine D2, and D3 receptor binding affinity

    DEFF Research Database (Denmark)

    Song, Xiaodong; Crider, Michael A.; Cruse, Sharon F.

    1999-01-01

    cis- and trans-2,3,3a,4,5,9b-hexahydro-1H-benz [e]indoles were synthesized as conformationally rigid analogues of 3-phenylpyrrolidine and evaluated for dopamine (DA) D2S and D3 receptor binding affinity. The tricyclic benz[e]indole nucleus was constructed by a previously reported reductive...... configuration. These novel ligands may be useful tools for gaining additional information about the DA D3 receptor. Copyright Elsevier, Paris.dopamine / D2S receptor / D3 receptor / cis- and trans-2,3,3a,4,5,9b-hexahydro-1H-benz[e]indoles / receptor binding affinity....... receptors was shown by compounds substituted with N-n-propyl or N-allyl groups. The cis-(+-)-N-allyl derivative 21e demonstrated a D2S/D3 selectivity of 290. Resolution of cis-(+-)-5 and trans-(+-)- 21c into individual enantiomers showed that in both series the more active isomer had 3aR absolute...

  5. 3D-reconstructions and virtual 4D-visualization to study metamorphic brain development in the sphinx moth Manduca sexta

    Directory of Open Access Journals (Sweden)

    Wolf Huetteroth

    2010-03-01

    Full Text Available During metamorphosis, the transition from the larva to the adult, the insect brain undergoes considerable remodeling: New neurons are integrated while larval neurons are remodeled or eliminated. One well acknowledged model to study metamorphic brain development is the sphinx moth Manduca sexta. To further understand mechanisms involved in the metamorphic transition of the brain we generated a 3D standard brain based on selected brain areas of adult females and 3D reconstructed the same areas during defined stages of pupal development. Selected brain areas include for example mushroom bodies, central complex, antennal- and optic lobes. With this approach we eventually want to quantify developmental changes in neuropilar architecture, but also quantify changes in the neuronal complement and monitor the development of selected neuronal populations. Furthermore, we used a modeling software (Cinema 4D to create a virtual 4D brain, morphing through its developmental stages. Thus the didactical advantages of 3D visualization are expanded to better comprehend complex processes of neuropil formation and remodeling during development. To obtain datasets of the M. sexta brain areas, we stained whole brains with an antiserum against the synaptic vesicle protein synapsin. Such labeled brains were then scanned with a confocal laser scanning microscope and selected neuropils were reconstructed with the 3D software AMIRA 4.1.

  6. Online 3D terrain visualisation using Unity 3D game engine: A comparison of different contour intervals terrain data draped with UAV images

    Science.gov (United States)

    Hafiz Mahayudin, Mohd; Che Mat, Ruzinoor

    2016-06-01

    The main objective of this paper is to discuss on the effectiveness of visualising terrain draped with Unmanned Aerial Vehicle (UAV) images generated from different contour intervals using Unity 3D game engine in online environment. The study area that was tested in this project was oil palm plantation at Sintok, Kedah. The contour data used for this study are divided into three different intervals which are 1m, 3m and 5m. ArcGIS software were used to clip the contour data and also UAV images data to be similar size for the overlaying process. The Unity 3D game engine was used as the main platform for developing the system due to its capabilities which can be launch in different platform. The clipped contour data and UAV images data were process and exported into the web format using Unity 3D. Then process continue by publishing it into the web server for comparing the effectiveness of different 3D terrain data (contour data) draped with UAV images. The effectiveness is compared based on the data size, loading time (office and out-of-office hours), response time, visualisation quality, and frame per second (fps). The results were suggest which contour interval is better for developing an effective online 3D terrain visualisation draped with UAV images using Unity 3D game engine. It therefore benefits decision maker and planner related to this field decide on which contour is applicable for their task.

  7. Homologation of hexopyranosides: use of differential Overhauser nuclear effect, and homo- and heteronuclear correlations of chemical shift for characterization of the 1,6-anhydro-4-O-benzoyl-2,3-didesoky-3-C-trifluoroacetamidomethyl-{beta}-D-m = ethyl ribopyranoside (16a); Homologacao de hexopiranosideos: utilizacao de efeito nuclear overhauser diferencial e de correlacoes homo e heteronuclear de deslocamentos quimicos para a caracterizacao do 1,6-anidro-4-O-benzoil-2,3-didesoxi-3-C- trifluoroacetamidometil-{beta}-D-ribo piranosideo de metila (16a)

    Energy Technology Data Exchange (ETDEWEB)

    Souza Filho, J D; Silva, L.G. Fonseca e; Oliveira, A Braga de; Alves, R Jose [Minas Gerais Univ., Belo Horizonte, MG (Brazil); Lukacs, G [Centre National de la Recherche Scientifique (CNRS), 91 - Gif-sur-Yvette (France). Inst. de Chimie des Substances Naturelles

    1992-12-31

    The discovery of ramified sugars as various antibiotics constituents, leads to the development of various preparation technologies. In the framework of hexa pyranose analogues synthesis, the 1,6-anhydride -16a was one of the byproducts obtained in the attempt of bromide -16 derivative transformation in the iodate -6-1 derivative. The bromide -16 derivative was treated with 2 equivalents of Bu{sub 4} N I during 24 hours, acetonitrile reflux. 3 parts of 2 Bu{sub 4} N I equivalents were added each 24 hours. A unique pure substance was obtained from the formed products mixture, which the structural determination was proposed in accordance with: 1) disappearing of the C-13 signal and the two protons from the anomeric methoxy group, and 2) registering of the molecular ion with m/z 359D, corresponding to the loss of 94D (Br + C H{sub 3}), from the -16 (M{sup +}., m/z 453D). The 1,6-anhydride -16a structure was confirmed by experiments on homo- and heteronuclear correlations of chemical shifts (COSY H-H and COSY C-H), and by spectroscopy using the differential Overhauser nuclear effect. The spectrum obtained by C-H correlation identified the singlet at 5.65 ppm as due to the H-1 ([C-1 x H-1]) 2 refs., 6 figs.

  8. 3D laser imaging for ODOT interstate network at true 1-mm resolution.

    Science.gov (United States)

    2014-12-01

    With the development of 3D laser imaging technology, the latest iteration of : PaveVision3D Ultra can obtain true 1mm resolution 3D data at full-lane coverage in all : three directions at highway speed up to 60MPH. This project provides rapid survey ...

  9. EPCR promotes breast cancer progression by altering SPOCK1/testican 1-mediated 3D growth

    Directory of Open Access Journals (Sweden)

    Naiara Perurena

    2017-01-01

    Full Text Available Abstract Background Activated protein C/endothelial protein C receptor (APC/EPCR axis is physiologically involved in anticoagulant and cytoprotective activities in endothelial cells. Emerging evidence indicates that EPCR also plays a role in breast stemness and human tumorigenesis. Yet, its contribution to breast cancer progression and metastasis has not been elucidated. Methods Transcriptomic status of EPCR was examined in a cohort of 286 breast cancer patients. Cell growth kinetics was evaluated in control and EPCR and SPARC/osteonectin, Cwcv, and kazal-like domains proteoglycan (SPOCK1/testican 1 silenced breast cancer cells in 2D, 3D, and in co-culture conditions. Orthotopic tumor growth and lung and osseous metastases were evaluated in several human and murine xenograft breast cancer models. Tumor-stroma interactions were further studied in vivo by immunohistochemistry and flow cytometry. An EPCR-induced gene signature was identified by microarray analysis. Results Analysis of a cohort of breast cancer patients revealed an association of high EPCR levels with adverse clinical outcome. Interestingly, EPCR knockdown did not affect cell growth kinetics in 2D but significantly reduced cell growth in 3D cultures. Using several human and murine xenograft breast cancer models, we showed that EPCR silencing reduced primary tumor growth and secondary outgrowths at metastatic sites, including the skeleton and the lungs. Interestingly, these effects were independent of APC ligand stimulation in vitro and in vivo. Transcriptomic analysis of EPCR-silenced tumors unveiled an effect mediated by matricellular secreted proteoglycan SPOCK1/testican 1. Interestingly, SPOCK1 silencing suppressed in vitro 3D growth. Moreover, SPOCK1 ablation severely decreased orthotopic tumor growth and reduced bone metastatic osteolytic tumors. High SPOCK1 levels were also associated with poor clinical outcome in a subset breast cancer patients. Our results suggest that EPCR

  10. Direct energy conversion and neutral beam injection for catalyzed D and D-3He tokamak reactors

    International Nuclear Information System (INIS)

    Blum, A.S.; Moir, R.W.

    1977-01-01

    The calculated performance of single stage and Venetian blind direct energy converters for Catalyzed D and D- 3 He Tokamak reactors are discussed. Preliminary results on He pumping are outlined. The efficiency of D and T neutral beam injection is reviewed

  11. Novel clinical staging for patients with end-stage gastrointestinal carcinoma.

    Science.gov (United States)

    Yasuda, Naokuni; Nakashima, Osamu; Ohnaka, Toru; Kamisaka, Koji; Tsunoda, Akira; Kusano, Mitsuo

    2006-01-01

    We created a new clinical staging system for end-stage gastrointestinal (GI) carcinoma to clarify the therapeutic goals for these patients. Data were obtained from a retrospective review of medical charts. Based on daily clinical observation of 144 patients with end-stage GI carcinoma, we classified the terminal stages as A, B, C, and D. The mean durations of terminal stages A, B, C, and D were 19, 16.6, 6.6, and 1.8 days, respectively, in patients with end-stage gastric cancer and 28.5, 9.1, 5.4, and 1.9 days, respectively, in patients with colorectal cancer. Moreover, 88.0% of patients with gastric carcinoma and 82.6% of patients with colorectal carcinoma passed through terminal stages A, B, C, and D sequentially. The patients in terminal stage B experienced temporary relief of symptoms, but those in terminal stage C did not (P terminal stages can easily be judged by clinical observation and may be an effective new tool with which to manage patients with end-stage GI carcinoma and their families.

  12. 1D helix, 2D brick-wall and herringbone, and 3D interpenetration d10 metal-organic framework structures assembled from pyridine-2,6-dicarboxylic acid N-oxide.

    Science.gov (United States)

    Wen, Li-Li; Dang, Dong-Bin; Duan, Chun-Ying; Li, Yi-Zhi; Tian, Zheng-Fang; Meng, Qing-Jin

    2005-10-03

    Five novel interesting d(10) metal coordination polymers, [Zn(PDCO)(H2O)2]n (PDCO = pyridine-2,6-dicarboxylic acid N-oxide) (1), [Zn2(PDCO)2(4,4'-bpy)2(H2O)2.3H2O]n (bpy = bipyridine) (2), [Zn(PDCO)(bix)]n (bix = 1,4-bis(imidazol-1-ylmethyl)benzene) (3), [Zn(PDCO)(bbi).0.5H2O]n (bbi = 1,1'-(1,4-butanediyl)bis(imidazole)) (4), and [Cd(PDCO)(bix)(1.5).1.5H2O]n (5), have been synthesized under hydrothermal conditions and structurally characterized. Polymer 1 possesses a one-dimensional (1D) helical chainlike structure with 4(1) helices running along the c-axis with a pitch of 10.090 Angstroms. Polymer 2 has an infinite chiral two-dimensional (2D) brick-wall-like layer structure in the ac plane built from achiral components, while both 3 and 4 exhibit an infinite 2D herringbone architecture, respectively extended in the ac and ab plane. Polymer 5 features a most remarkable and unique three-dimensional (3D) porous framework with 2-fold interpenetration related by symmetry, which contains channels in the b and c directions, both distributed in a rectangular grid fashion. Compounds 1-5, with systematic variation in dimensionality from 1D to 2D to 3D, are the first examples of d(10) metal coordination polymers into which pyridinedicarboxylic acid N-oxide has been introduced. In addition, polymers 1, 4, and 5 display strong blue fluorescent emissions in the solid state. Polymer 3 exhibits a strong SHG response, estimated to be approximately 0.9 times that of urea.

  13. Escape of O(3P), O(1D), and O(1S) from the Martian atmosphere

    Science.gov (United States)

    Fox, Jane L.; Hać, Aleksander B.

    2018-01-01

    We have computed here the escape probabilities, fluxes and rates for hot O atoms that are initially produced in the ground state and the first two excited metastable states, O(1D)and O(1S), in the Martian thermosphere by dissociative recombination of O2+. In order to compare our results with those of our previous calculations and with those of others, we have employed here the pre-MAVEN models that we have used previously. To compute the escape probabilities, we have employed the Monte Carlo escape code that has been described previously, but we here use for the first time energy-dependent elastic cross sections for collisions of the energetic O atoms with each of the twelve background species in our model. We also incorporate three mechanisms that interchange identities of the O(3P) and O(1D) atoms, including collisional excitation of O(3P) to O(1D), quenching of O(1D) to O(3P), and excitation exchange of O(1D) with O(3P). We find that the escape probabilities of O atoms that are produced initially as O(1D) are reduced compared to those in which these processes are not included, but the escape probabilities of O atoms that are initially produced as O(3P) are not significantly reduced. As a guide for our future research and those of other investigators, we review here what is known about the interactions of O atoms with other species in which the energies of the O atoms are altered, and several other sources of hot and escaping O, many of which have been suggested by other investigators. We will incorporate these data in a future MAVEN-like model.

  14. Streamlined, Inexpensive 3D Printing of the Brain and Skull.

    Science.gov (United States)

    Naftulin, Jason S; Kimchi, Eyal Y; Cash, Sydney S

    2015-01-01

    Neuroimaging technologies such as Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) collect three-dimensional data (3D) that is typically viewed on two-dimensional (2D) screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM) images to stereolithography (STL) files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3-4 in consumable plastic filament as described, and the total process takes 14-17 hours, almost all of which is unsupervised (preprocessing = 4-6 hr; printing = 9-11 hr, post-processing = Printing a matching portion of a skull costs $1-5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes.

  15. Streamlined, Inexpensive 3D Printing of the Brain and Skull.

    Directory of Open Access Journals (Sweden)

    Jason S Naftulin

    Full Text Available Neuroimaging technologies such as Magnetic Resonance Imaging (MRI and Computed Tomography (CT collect three-dimensional data (3D that is typically viewed on two-dimensional (2D screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM images to stereolithography (STL files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3-4 in consumable plastic filament as described, and the total process takes 14-17 hours, almost all of which is unsupervised (preprocessing = 4-6 hr; printing = 9-11 hr, post-processing = <30 min. Printing a matching portion of a skull costs $1-5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes.

  16. Streamlined, Inexpensive 3D Printing of the Brain and Skull

    Science.gov (United States)

    Cash, Sydney S.

    2015-01-01

    Neuroimaging technologies such as Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) collect three-dimensional data (3D) that is typically viewed on two-dimensional (2D) screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM) images to stereolithography (STL) files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3–4 in consumable plastic filament as described, and the total process takes 14–17 hours, almost all of which is unsupervised (preprocessing = 4–6 hr; printing = 9–11 hr, post-processing = Printing a matching portion of a skull costs $1–5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes. PMID:26295459

  17. Data Assimilation of Lightning using 1D+3D/4D WRF Var Assimilation Schemes with Non-Linear Observation Operators

    Science.gov (United States)

    Navon, M. I.; Stefanescu, R.; Fuelberg, H. E.; Marchand, M.

    2012-12-01

    NASA's launch of the GOES-R Lightning Mapper (GLM) in 2015 will provide continuous, full disc, high resolution total lightning (IC + CG) data. The data will be available at a horizontal resolution of approximately 9 km. Compared to other types of data, the assimilation of lightning data into operational numerical models has received relatively little attention. Previous efforts of lightning assimilation mostly have employed nudging. This paper will describe the implementation of 1D+3D/4D Var assimilation schemes of existing ground-based WTLN (Worldwide Total Lightning Network) lightning observations using non-linear observation operators in the incremental WRFDA system. To mimic the expected output of GLM, the WTLN data were used to generate lightning super-observations characterized by flash rates/81 km2/20 min. A major difficulty associated with variational approaches is the complexity of the observation operator that defines the model equivalent of lightning. We use Convective Available Potential Energy (CAPE) as a proxy between lightning data and model variables. This operator is highly nonlinear. Marecal and Mahfouf (2003) have shown that nonlinearities can prevent direct assimilation of rainfall rates in the ECMWF 4D-VAR (using the incremental formulation proposed by Courtier et al. (1994)) from being successful. Using data from the 2011 Tuscaloosa, AL tornado outbreak, we have proved that the direct assimilation of lightning data into the WRF 3D/4D - Var systems is limited due to this incremental approach. Severe threshold limits must be imposed on the innovation vectors to obtain an improved analysis. We have implemented 1D+3D/4D Var schemes to assimilate lightning observations into the WRF model. Their use avoids innovation vector constrains from preventing the inclusion of a greater number of lightning observations Their use also minimizes the problem that nonlinearities in the moist convective scheme can introduce discontinuities in the cost function

  18. Local injection of d-lys-3-GHRP-6 in the rat amygdala, dentate gyrus or ventral tegmental area impairs memory consolidation.

    Science.gov (United States)

    Beheshti, Siamak; Aslani, Neda

    2018-02-01

    It is well known that the hormone ghrelin affects learning and memory in different experimental models of learning. Though, the effect of antagonism of ghrelin receptor type 1a (GHS-R1a) in various regions of the brain and on different stages of learning has not been examined. In this study the effect of injection of a GHS-R1a selective antagonist (d-Lys-3-GHRP-6) into the basolateral amygdala, dentate gyrus or ventral tegmental area was examined on memory consolidation in the passive avoidance task. Adult male Wistar rats weighing 230-280g were used. Animals underwent stereotaxic surgery and cannulated in their amygdala, dentate gyrus or ventral tegmental area. One week after surgery, the rats received different doses of d-Lys-3-GHRP-6 (0.08, 0.8, and 8nM), immediately after training. The control groups received solvent of the drug. Twenty four hours later in the test day, memory retrieval was assessed. In all groups, post-training injection of d-Lys-3-GHRP-6 decreased step-through latency and increased entries into the dark compartment and time spent in the dark compartment, significantly and in a dose-dependent manner. The results indicate that antagonism of the GHS-R1a in the rat amygdala, dentate gyrus or ventral tegmental area impairs memory consolidation and show that the ghrelin signaling has a widespread influence on cognitive performance. Copyright © 2017. Published by Elsevier Ltd.

  19. Antidepressant-Like Effect of 1α-Hydroxyvitamin D3 on Mice in the Forced Swimming Test.

    Science.gov (United States)

    Kawaura, Akihiko; Kitamura, Yoshihisa; Tanida, Noritoshi; Akiyama, Junichi; Mizutani, Masatoshi; Harada, Kazuhiro; Morishita, Motoyoshi; Inoue, Shigeki; Kano, Yoshio; Okano, Toshio; Takeda, Eiji

    2017-01-01

    We examined the effect of 1α-hydroxyvitamin D 3 [1α(OH)D 3 ] on mice in the forced swimming test. Intragastric administration of 1.0 μg/kg of 1α(OH)D 3 reduced immobility time in the forced swimming test. At all concentrations tested (0.5, 1.0, 2.0 μg/kg), 1α(OH)D 3 had no effect on locomotor activity, compared with controls. These results suggest that 1α(OH)D 3 may have antidepressant-like activity.

  20. Delft3D turbine turbulence module v. 1.0.0

    Energy Technology Data Exchange (ETDEWEB)

    2016-08-25

    The DOE has funded Sandia National Labs (SNL) to develop an open-source modeling tool to guide the design and layout of marine hydrokinetic (MHK) arrays to maximize power production while minimizing environmental effects. This modeling framework simulates flows through and around a MHK arrays while quantifying environmental responses. As an augmented version of the Dutch company, Deltares’s, environmental hydrodynamics code, Delft3D, Delft3D-CEC includes a new module that simulates energy conversion (momentum withdrawal) by MHK current energy conversion devices with commensurate changes in the turbulent kinetic energy and its dissipation rate. The Following is a description of Deltares’s open-source code Delft3D from which Delft3D-CEC is built upon. “Delft3D is a world leading 3D modeling suite to investigate hydrodynamics, sediment transport and morphology and water quality for fluvial, estuarine and coastal environments. As per 1 January 2011, the Delft3D flow (FLOW), morphology (MOR) and waves (WAVE) modules are available in open source. The software is used and has proven his capabilities on many places around the world, like the Netherlands, USA, Hong Kong, Singapore, Australia, Venice, etc. The software is continuously improved and developed with innovating advanced modelling techniques as consequence of the research work of our institute and to stay world leading. The FLOW module is the heart of Delft3D and is a multi-dimensional (2D or 3D) hydrodynamic (and transport) simulation programme which calculates non-steady flow and transport phenomena resulting from tidal and meteorological forcing on a curvilinear, boundary fitted grid or sperical coordinates. In 3D simulations, the vertical grid is defined following the so-called sigma coordinate approach or Z-layer approach. The MOR module computes sediment transport (both suspended and bed total load) and morphological changes for an arbitrary number of cohesive and non-cohesive fractions. Both currents

  1. Key Markers of mTORC1-Dependent and mTORC1-Independent Signaling Pathways Regulating Protein Synthesis in Rat Soleus Muscle During Early Stages of Hindlimb Unloading.

    Science.gov (United States)

    Mirzoev, Timur; Tyganov, Sergey; Vilchinskaya, Natalia; Lomonosova, Yulia; Shenkman, Boris

    2016-01-01

    The purpose of the study was to assess the amount of rRNA and phosphorylation status of the key markers of mTORC1-dependent (70s6k, 4E-BP1) and mTORC1-independent (GSK-3β, AMPK) signaling pathways controlling protein synthesis in rat soleus during early stages of mechanical unloading (hindlimb suspension (HS) for 1-, 3- and 7 days). The content of the key signaling molecules of various anabolic signaling pathways was determined by Western-blotting. The amount of 28S rRNA was evaluated by RT-PCR. The rate of protein synthesis was assessed using in-vivo SUnSET technique. HS for 3 and 7 days induced a significant (pprotein synthesis in soleus muscle in comparison with control. HS within 24 hours resulted in a significant (pprotein synthesis in rat soleus during early stages of simulated microgravity is associated with impaired ribosome biogenesis as well as reduced activity of mTORC1-independent signaling pathways. © 2016 The Author(s) Published by S. Karger AG, Basel.

  2. RAPIDARC (RA) in the uterine cervical cancer; dosimetric gain vs 3D-Crt

    International Nuclear Information System (INIS)

    Ramirez, J.; Garcia, B.; Quispe, K.; Gonzales, A.; Marquina, J.

    2014-08-01

    This work aims to quantitatively assess RAPIDARC (RA) treatments versus three dimensional-Conformal Radiation Therapy with field to field technique (3D-Crt-Fin F). 11 patients with cervical cancer treated at our institution radically or adjuvant clinical stages I-III B were evaluated. The prescribed dose was 50 Gy (2 Gy / Fr). The RA plans consisted of two isocentric complete arcs and conformational plans of 4 isocentric fields (previous, subsequent, right side and left side) with 3D-Crt-Fin F technique; both cases carried out ??in the Eclipse version 10 planner with calculation algorithm analytical anisotropic algorithm (AAA) and volumetric optimization software (for VMAT plans). Homogeneity indices (Hi), conformity indices (CI) Sigma indices (S-Index), monitor units (MU) and the time required for each treatment were compared. The mean age was 52 years (32-65) of the 11 patients 9 were clinical stages I-II B. The Hi varied from 0.052 for RA to 0.163 for 3D-Crt-Fin F (p = 0.009), and the CI between 1.005 and 1.35 (p = 0.26), the S-index from 1.2 to 3.7 (p = 0.001) and the H-index of 1.08 to 1.15 (p = 0.24). All dose limits in risk organs were met with a significant difference in the RA plans versus 3D-Crt-Fin F. In patients with cervical cancer the treatment plans quality with the indices aforementioned seems to be better with the RA technique, being observed a significant reduction of radiation to surrounding organs. (author)

  3. In-body tissue-engineered aortic valve (Biovalve type VII) architecture based on 3D printer molding.

    Science.gov (United States)

    Nakayama, Yasuhide; Takewa, Yoshiaki; Sumikura, Hirohito; Yamanami, Masashi; Matsui, Yuichi; Oie, Tomonori; Kishimoto, Yuichiro; Arakawa, Mamoru; Ohmuma, Kentaro; Tajikawa, Tsutomu; Kanda, Keiichi; Tatsumi, Eisuke

    2015-01-01

    In-body tissue architecture--a novel and practical regeneration medicine technology--can be used to prepare a completely autologous heart valve, based on the shape of a mold. In this study, a three-dimensional (3D) printer was used to produce the molds. A 3D printer can easily reproduce the 3D-shape and size of native heart valves within several processing hours. For a tri-leaflet, valved conduit with a sinus of Valsalva (Biovalve type VII), the mold was assembled using two conduit parts and three sinus parts produced by the 3D printer. Biovalves were generated from completely autologous connective tissue, containing collagen and fibroblasts, within 2 months following the subcutaneous embedding of the molds (success rate, 27/30). In vitro evaluation, using a pulsatile circulation circuit, showed excellent valvular function with a durability of at least 10 days. Interposed between two expanded polytetrafluoroethylene grafts, the Biovalves (N = 3) were implanted in goats through an apico-aortic bypass procedure. Postoperative echocardiography showed smooth movement of the leaflets with minimal regurgitation under systemic circulation. After 1 month of implantation, smooth white leaflets were observed with minimal thrombus formation. Functional, autologous, 3D-shaped heart valves with clinical application potential were formed following in-body embedding of specially designed molds that were created within several hours by 3D printer. © 2014 Wiley Periodicals, Inc.

  4. 2-[{sup 18}F]fluoro-2-deoxy-D-glucose positron emission tomography (F.D.G.-PET) can identify chronic lymphocytic leukaemia (C.L.L.) stage A et stage B patients; La tomographie par emission de positons au 2-[{sup 18}F] fluoro-2-desoxy-D-glucose (TEP-FDG) permet d'identifier les stades A et B des leucemies lymphoides chroniques (LLC)

    Energy Technology Data Exchange (ETDEWEB)

    Berthelot, C.; Vervueren, L.; Le Jeune, J.J.; Couturier, O. [Centre Hospitalier Universitaire, Service de Medecine Nucleaire, 49 - Angers (France); Truchan-Graczyk, M.; Genevieve, F.; Ifrah, N. [Centre Hospitalier Universitaire, Service d' Hematologie, 49 - Angers (France); Poirier, A.L. [BEC, centre Paul-Papin, 49 -Angers (France); Artur-Guillemette, P. [Centre Hospitalier Universitaire, Service de Radiologie, 49 - Angers (France)

    2009-09-15

    Purpose: There is no data in the literature concerning the utility of 2-[{sup 18}F]fluoro-2-deoxy-d-glucose positron emission tomography (F.D.G.-PET) in chronic lymphocytic leukaemia (C.L.L.), except for the diagnosis of Richter's transformations. The purpose of this study was to assess the potential role of F.D.G.-PET in C.L.L. stages A and B. Materials and methods Thirty-five patients (61 {+-} 9 years; 11 women, 24 men; 8 B and 27 A) have benefited of a F.D.G.-PET scan at baseline, for example, before an eventual treatment. F.D.G.-PET scans were analyzed visually and the maximum values of the Standardised Uptake Value (S.U.V.{sub max}) were measured in the main lymph nodes areas. The ability of F.D.G.-PET to differentiate stages A and B patients was evaluated by Student's tests and Receiver Operating Characteristics (R.O.C.) analysis. Results All patients with a normal F.D.G.-PET (n = 18) were stages A. The remaining 17 patients (9 A and 8 B) showed hyper metabolisms in nodal areas above (n = 17) and below (n = 9) the diaphragm, and no visceral involvement. The lymph nodes hyper metabolisms were always bilateral, and of low intensity (= mediastinum; 9 A), or of higher intensity (= liver, 8 B). The S.U.V.{sub max} of stage B (n = 8) were significantly higher than those of the 27 stages A, in all lymph nodes areas except in mediastinum. The highest intensity of F.D.G. uptake was observed in axillary area in stages B patients (S.U.V.max = 2.74 {+-} 1.03). An axillary S.U.V.{sub max} of 1.33 is the most suitable value for the discrimination between stages A and B patients (R.O.C.; AUC = 0.968; sensitivity 1.00; specificity 0.91). Conclusion Lymph nodes hyper metabolisms are constant in the B stage, and more intense than in stage A. These anomalies are always bilateral, unlike what is observed in Richter's transformation. The intensity of axillary lymph nodes F.D.G. uptake can distinguish C.L.L. stages A and B. (authors)

  5. Using 1D theory to understand 3D stagnation of a wire-array Z pinch in the absence of radiation

    Science.gov (United States)

    Yu, Edmund

    2015-11-01

    Many high-energy-density systems implode towards the axis of symmetry, where it collides on itself, forming a hot plasma. However, experiments show these imploding plasmas develop three-dimensional (3D) structures. As a result, the plasma cannot completely dissipate its kinetic energy at stagnation, instead retaining significant 3D flow. A useful tool for understanding the effects of this residual flow is 3D simulation, but the amount and complexity of information can be daunting. To address this problem, we explore the connection between 3D simulation and one-dimensional (1D) theory. Such a connection, if it exists, is mutually beneficial: 1D theory can provide a clear picture of the underlying dynamics of 3D stagnation. On the other hand, deviations between theory and simulation suggest how 1D theory must be modified to account for 3D effects. In this work, we focus on a 3D, magnetohydrodynamic simulation of a compact wire-array Z pinch. To provide a simpler background against which to test our ideas, we artificially turn off radiation during the stagnation phase. Examination of the initial accumulation of mass on axis reveals oblique collision between jets, shock accretion, and vortex formation. Despite evidence for shock-dominated stagnation, a 1D shockless stagnation solution is more appropriate for describing the global dynamics, in that it reproduces the increase of on-axis density with time. However, the 1D solution must be modified to account for 3D effects: the flows suggest enhanced thermal transport as well as centrifugal force. Upon reaching peak compression, the stagnation transitions to a second phase, in which the high-pressure core on axis expands outward into the remaining imploding plasma. During this phase, a 1D shock solution describes the growth of the shock accretion region, as well as the decrease of on-axis density with time. However, the effect of 3D flows is still present: the on-axis temperature does not cool during expansion, which

  6. The Outcome of Postoperative Radiation Therapy for Patients with Stage II Pancreatic Cancer (T3 or N1 Disease)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Won; Chun, Misun; Kim, Myung Wook; Kim, Wook Hwan; Kang, Seok Yun; Kang, Seung Hee; Oh, Young Taek; Lee, Sunyoung; Yang, Juno [Ajou University School of Medicine, Suwon (Korea, Republic of)

    2007-12-15

    Purpose: To analyze retrospectively the outcome of postoperative radiation therapy with or without concurrent chemotherapy for curatively resected stage II pancreatic cancer with T3 or N1 disease. Materials and Methods: Between January 1996 and December 2005, twenty-eight patients completed adjuvant radiation therapy at Ajou University Hospital. The patients had either pathologic T3 stage or N1 stage. The radiation target volume encompassed the initial tumor bed identified preoperatively, resection margin area and celiac nodal area. In the case of N1 patients, the radiation field extended to the lower margin of the L3 vertebra for covering both para-aortic lymph nodes bearing area. The median total radiation dose was 50 Gy. Ten patients received concurrent chemotherapy. Results: Thirteen patients (46%) showed loco-regional recurrences. The celiac axis nodal area was the most frequent site (4 patients). Five patients showed both loco-regional recurrence and a distant metastasis. Patients with positive lymph nodes had a relatively high probability of a distant metastasis (57.1%). Patients that had a positive resection margin showed a relatively high local failure rate (57.1%). The median disease-free survival period of all patients was 6 months and the 1- and 2-year disease free survival rates were 27.4% and 8.2%, respectively. The median overall survival period was 9 months. The 2- and 3-year overall survival rates were 31.6% and 15.8%, respectively. Conclusion: The pancreatic cancer patients with stage II had a high risk of local failure and a high risk of a distant metastasis. We suggest the concurrent use of an effective radiation-sensitizing chemotherapeutic drug and adjuvant chemotherapy after postoperative radiation therapy for the treatment of patients with stage II pancreatic cancer.

  7. The Outcome of Postoperative Radiation Therapy for Patients with Stage II Pancreatic Cancer (T3 or N1 Disease)

    International Nuclear Information System (INIS)

    Kim, Sang Won; Chun, Misun; Kim, Myung Wook; Kim, Wook Hwan; Kang, Seok Yun; Kang, Seung Hee; Oh, Young Taek; Lee, Sunyoung; Yang, Juno

    2007-01-01

    Purpose: To analyze retrospectively the outcome of postoperative radiation therapy with or without concurrent chemotherapy for curatively resected stage II pancreatic cancer with T3 or N1 disease. Materials and Methods: Between January 1996 and December 2005, twenty-eight patients completed adjuvant radiation therapy at Ajou University Hospital. The patients had either pathologic T3 stage or N1 stage. The radiation target volume encompassed the initial tumor bed identified preoperatively, resection margin area and celiac nodal area. In the case of N1 patients, the radiation field extended to the lower margin of the L3 vertebra for covering both para-aortic lymph nodes bearing area. The median total radiation dose was 50 Gy. Ten patients received concurrent chemotherapy. Results: Thirteen patients (46%) showed loco-regional recurrences. The celiac axis nodal area was the most frequent site (4 patients). Five patients showed both loco-regional recurrence and a distant metastasis. Patients with positive lymph nodes had a relatively high probability of a distant metastasis (57.1%). Patients that had a positive resection margin showed a relatively high local failure rate (57.1%). The median disease-free survival period of all patients was 6 months and the 1- and 2-year disease free survival rates were 27.4% and 8.2%, respectively. The median overall survival period was 9 months. The 2- and 3-year overall survival rates were 31.6% and 15.8%, respectively. Conclusion: The pancreatic cancer patients with stage II had a high risk of local failure and a high risk of a distant metastasis. We suggest the concurrent use of an effective radiation-sensitizing chemotherapeutic drug and adjuvant chemotherapy after postoperative radiation therapy for the treatment of patients with stage II pancreatic cancer

  8. Theobromine inhibits differentiation of 3T3-L1 cells during the early stage of adipogenesis via AMPK and MAPK signaling pathways.

    Science.gov (United States)

    Jang, Yeon Jeong; Koo, Hyun Jung; Sohn, Eun-Hwa; Kang, Se Chan; Rhee, Dong-Kwon; Pyo, Suhkneung

    2015-07-01

    Obesity is characterized by hypertrophy and/or by the differentiation or adipogenesis of pre-existing adipocytes. In this study, we investigated the inhibitory effects of theobromine, a type of alkaloid in cocoa, on adipocyte differentiation of 3T3-L1 preadipocytes and its mechanisms of action. Theobromine inhibited the accumulation of lipid droplets, the expression of PPARγ and C/EBPα, and the mRNA expression of aP2 and leptin. The inhibition of adipogenic differentiation by theobromine occurred primarily in the early stages of differentiation. In addition, theobromine arrested the cell cycle at the G0/G1 phase and regulated the expressions of CDK2, p27, and p21. Theobromine treatment increased AMPK phosphorylation and knockdown of AMPKα1/α2 prevented the ability of theobromine to inhibit PPARγ expression in the differentiating 3T3-L1 cells. Theobromine reduced the phosphorylation of ERK and JNK. Moreover, the secretion and the mRNA level of TNF-α and IL-6 were inhibited by theobromine treatment. These data suggest that theobromine inhibits adipocyte differentiation during the early stages of adipogenesis by regulating the expression of PPARγ and C/EBPα through the AMPK and ERK/JNK signaling pathways in 3T3-L1 preadipocytes.

  9. Increasing the automation of a 2D-3D registration system.

    Science.gov (United States)

    Varnavas, Andreas; Carrell, Tom; Penney, Graeme

    2013-02-01

    Routine clinical use of 2D-3D registration algorithms for Image Guided Surgery remains limited. A key aspect for routine clinical use of this technology is its degree of automation, i.e., the amount of necessary knowledgeable interaction between the clinicians and the registration system. Current image-based registration approaches usually require knowledgeable manual interaction during two stages: for initial pose estimation and for verification of produced results. We propose four novel techniques, particularly suited to vertebra-based registration systems, which can significantly automate both of the above stages. Two of these techniques are based upon the intraoperative "insertion" of a virtual fiducial marker into the preoperative data. The remaining two techniques use the final registration similarity value between multiple CT vertebrae and a single fluoroscopy vertebra. The proposed methods were evaluated with data from 31 operations (31 CT scans, 419 fluoroscopy images). Results show these methods can remove the need for manual vertebra identification during initial pose estimation, and were also very effective for result verification, producing a combined true positive rate of 100% and false positive rate equal to zero. This large decrease in required knowledgeable interaction is an important contribution aiming to enable more widespread use of 2D-3D registration technology.

  10. Robust 3D face landmark localization based on local coordinate coding.

    Science.gov (United States)

    Song, Mingli; Tao, Dacheng; Sun, Shengpeng; Chen, Chun; Maybank, Stephen J

    2014-12-01

    In the 3D facial animation and synthesis community, input faces are usually required to be labeled by a set of landmarks for parameterization. Because of the variations in pose, expression and resolution, automatic 3D face landmark localization remains a challenge. In this paper, a novel landmark localization approach is presented. The approach is based on local coordinate coding (LCC) and consists of two stages. In the first stage, we perform nose detection, relying on the fact that the nose shape is usually invariant under the variations in the pose, expression, and resolution. Then, we use the iterative closest points algorithm to find a 3D affine transformation that aligns the input face to a reference face. In the second stage, we perform resampling to build correspondences between the input 3D face and the training faces. Then, an LCC-based localization algorithm is proposed to obtain the positions of the landmarks in the input face. Experimental results show that the proposed method is comparable to state of the art methods in terms of its robustness, flexibility, and accuracy.

  11. "Handling" seismic hazard: 3D printing of California Faults

    Science.gov (United States)

    Kyriakopoulos, C.; Potter, M.; Richards-Dinger, K. B.

    2017-12-01

    hours to print. After assembly, the length of the display is 1.4m. From our initial effort in printing and handling of the 3D printed faults, we conclude that a physical, 3D-printed model is very efficient in eliminating common misconceptions that nonscientists have about earthquake faults, particularly their geometry, extension and orientation in space.

  12. 3D documenatation of the petalaindera: digital heritage preservation methods using 3D laser scanner and photogrammetry

    Science.gov (United States)

    Sharif, Harlina Md; Hazumi, Hazman; Hafizuddin Meli, Rafiq

    2018-01-01

    3D imaging technologies have undergone massive revolution in recent years. Despite this rapid development, documentation of 3D cultural assets in Malaysia is still very much reliant upon conventional techniques such as measured drawings and manual photogrammetry. There is very little progress towards exploring new methods or advanced technologies to convert 3D cultural assets into 3D visual representation and visualization models that are easily accessible for information sharing. In recent years, however, the advent of computer vision (CV) algorithms make it possible to reconstruct 3D geometry of objects by using image sequences from digital cameras, which are then processed by web services and freeware applications. This paper presents a completed stage of an exploratory study that investigates the potentials of using CV automated image-based open-source software and web services to reconstruct and replicate cultural assets. By selecting an intricate wooden boat, Petalaindera, this study attempts to evaluate the efficiency of CV systems and compare it with the application of 3D laser scanning, which is known for its accuracy, efficiency and high cost. The final aim of this study is to compare the visual accuracy of 3D models generated by CV system, and 3D models produced by 3D scanning and manual photogrammetry for an intricate subject such as the Petalaindera. The final objective is to explore cost-effective methods that could provide fundamental guidelines on the best practice approach for digital heritage in Malaysia.

  13. 1,25D3 differentially suppresses bladder cancer cell migration and invasion through the induction of miR-101-3p.

    Science.gov (United States)

    Ma, Yingyu; Luo, Wei; Bunch, Brittany L; Pratt, Rachel N; Trump, Donald L; Johnson, Candace S

    2017-09-01

    Metastasis is the major cause of bladder cancer death. 1,25D 3 , the active metabolite of vitamin D, has shown anti-metastasis activity in several cancer model systems. However, the role of 1,25D 3 in migration and invasion in bladder cancer is unknown. To investigate whether 1,25D 3 affects migration and invasion, four human bladder cell lines with different reported invasiveness were selected: low-invasive T24 and 253J cells and highly invasive 253J-BV and TCCSUP cells. All of the four bladder cancer cells express endogenous and inducible vitamin D receptor (VDR) as examined by immunoblot analysis. 1,25D 3 had no effect on the proliferation of bladder cancer cells as assessed by MTT assay. In contrast, 1,25D 3 suppressed migration and invasion in the more invasive 253J-BV and TCCSUP cells, but not in the low-invasive 253J and T24 cells using "wound" healing, chemotactic migration and Matrigel-based invasion assays. 1,25D 3 promoted the expression of miR-101-3p and miR-126-3p in 253J-BV cells as examined by qRT-PCR. miR-101-3p inhibitor partially abrogated and pre-miR-101-3p further suppressed the inhibition of 1,25D 3 on migration and invasion in 253J-BV cells. Further, 1,25D 3 enhanced VDR recruitment to the promoter region of miR-101-3p using ChIP-qPCR assay. 1,25D 3 enhanced the promoter activity of miR-101-3p as evaluated by luciferase reporter assay. Taken together, 1,25D 3 suppresses bladder cancer cell migration and invasion in two invasive/migration competent lines but not in two less invasive/motile lines, which is partially through the induction of miR-101-3p expression at the transcriptional level.

  14. Validation of OPERA3D PCMI Analysis Code

    Energy Technology Data Exchange (ETDEWEB)

    Jeun, Ji Hoon; Choi, Jae Myung; Yoo, Jong Sung [KEPCO Nuclear Fuel Co., Daejeon (Korea, Republic of); Cheng, G.; Sim, K. S.; Chassie, Girma [Candu Energy INC.,Ontario (Canada)

    2013-10-15

    This report will describe introduction of validation of OPERA3D code, and validation results that are directly related with PCMI phenomena. OPERA3D was developed for the PCMI analysis and validated using the in-pile measurement data. Fuel centerline temperature and clad strain calculation results shows close expectations with measurement data. Moreover, 3D FEM fuel model of OPERA3D shows slight hour glassing behavior of fuel pellet in contact case. Further optimization will be conducted for future application of OPERA3D code. Nuclear power plant consists of many complicated systems, and one of the important objects of all the systems is maintaining nuclear fuel integrity. However, it is inevitable to experience PCMI (Pellet Cladding Mechanical Interaction) phenomena at current operating reactors and next generation reactors for advanced safety and economics as well. To evaluate PCMI behavior, many studies are on-going to develop 3-dimensional fuel performance evaluation codes. Moreover, these codes are essential to set the safety limits for the best estimated PCMI phenomena aimed for high burnup fuel.

  15. 3D mass digitization: a milestone for archeological documentation

    Directory of Open Access Journals (Sweden)

    Pedro Santos

    2017-05-01

    Full Text Available In the heritage field, the demand for fast and efficient 3D digitization technologies for historic remains is increasing. Besides, 3D digitization has proved to be a promising approach to enable precise reconstructions of objects. Yet, unlike the digital acquisition of cultural goods in 2D widely used today, 3D digitization often still requires a significant investment of time and money. To make it more widely available to heritage institutions, the Competence Center for Cultural Heritage Digitization at the Fraunhofer Institute for Computer Graphics Research IGD has developed CultLab3D, the world’s first 3D mass digitization facility for collections of three-dimensional objects. CultLab3D is specifically designed to automate the entire 3D digitization process thus allowing to scan and archive objects on a large-scale. Moreover, scanning and lighting technologies are combined to capture the exact geometry, texture, and optical material properties of artefacts to produce highly accurate photo-realistic representations. The unique setup allows to shorten the time needed for digitization to several minutes per artefact instead of hours, as required by conventional 3D scanning methods.

  16. Inhibition of Rac1 activity induces G1/S phase arrest through the GSK3/cyclin D1 pathway in human cancer cells.

    Science.gov (United States)

    Liu, Linna; Zhang, Hongmei; Shi, Lei; Zhang, Wenjuan; Yuan, Juanli; Chen, Xiang; Liu, Juanjuan; Zhang, Yan; Wang, Zhipeng

    2014-10-01

    Rac1 has been shown to regulate the cell cycle in cancer cells. Yet, the related mechanism remains unclear. Thus, the present study aimed to investigate the mechanism involved in the regulation of G1/S phase transition by Rac1 in cancer cells. Inhibition of Rac1 by inhibitor NSC23766 induced G1/S phase arrest and inhibited the proliferation of A431, SW480 and U2-OS cells. Suppression of GSK3 by shRNA partially rescued G1/S phase arrest and inhibition of proliferation. Incubation of cells with NSC23766 reduced p-AKT and inactivated p-GSK3α and p-GSK3β, increased p-cyclin D1 expression and decreased the level of cyclin D1 protein. Consequently, cyclin D1 targeting transcriptional factor E2F1 expression, which promotes G1 to S phase transition, was also reduced. In contrast, constitutive active Rac1 resulted in increased p-AKT and inactivated p-GSK3α and p-GSK3β, decreased p-cyclin D1 expression and enhanced levels of cyclin D1 and E2F1 expression. Moreover, suppression of GSK3 did not alter p-AKT or Rac1 activity, but decreased p-cyclin D1 and increased total cyclin D1 protein. However, neither Rac1 nor GSK3 inhibition altered cyclin D1 at the RNA level. Moreover, after inhibition of Rac1 or GSK3 following proteasome inhibitor MG132 treatment, cyclin D1 expression at the protein level remained constant, indicating that Rac1 and GSK3 may regulate cyclin D1 turnover through phosphorylation and degradation. Therefore, our findings suggest that inhibition of Rac1 induces cell cycle G1/S arrest in cancer cells by regulation of the GSK3/cyclin D1 pathway.

  17. 1,5-Anhydro-D-fructose from D-fructose

    DEFF Research Database (Denmark)

    Dekany, Gyula; Lundt, Inge; Niedermaier, Fabian

    2007-01-01

    1,5-Anhydro-D-fructose was efficiently prepared from D-fructose via regiospecific 1,5-anhydro ring formation of 2,3-O-isopropylidene-1-O-methyl(tolyl)sulfonyl-D-fructopyranose and subsequent deprotection.......1,5-Anhydro-D-fructose was efficiently prepared from D-fructose via regiospecific 1,5-anhydro ring formation of 2,3-O-isopropylidene-1-O-methyl(tolyl)sulfonyl-D-fructopyranose and subsequent deprotection....

  18. Solvent-free porous framework resulted from 3D entanglement of 1D zigzag coordination polymer

    KAUST Repository

    Kole, Goutam Kumar Umar

    2010-01-01

    A solvent-free porous metal organic framework is constructed by the 3D entanglement of 1D zigzag coordination polymeric chains. The role of solvents and the effect of reaction conditions on such unique entanglement are addressed. © 2010 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.

  19. Development of vitamin D3 25-hydroxylase activity in rat liver microsomes

    International Nuclear Information System (INIS)

    Thierry-Palmer, M.; Cullins, S.; Rashada, S.; Gray, T.K.; Free, A.

    1986-01-01

    The authors have determined the ontogeny of vitamin D 3 25-hydroxylase activity in rat liver microsomes. Microsomes from fetuses, neonates, and their mothers were incubated with 44 nM 3 H-vitamin D 3 in the presence of an NADPH generating system, oxygen, KCl, and MgCl 2 . Lipid extracts of the incubation samples were partially purified by thin-layer chromatography. Tritiated 25-hydroxy vitamin D 3 (250HD 3 ) was analyzed by high-pressure liquid chromatography using 94/6 hexane/isopropanol. Production rate for 250HD 3 in the mothers ranged from 0.22 to 0.30 pmol/mg protein/hr. Activities in the fetuses and neonates were 2.1, 12.9, 32.0, 35.8, and 71.0% of that of their mothers at -3, 0, 2, 7, and 15 days of age. The cytosolic fraction protected the substrate from degradation, stimulated the vitamin D 3 25-hydroxylase reaction in neonates and mothers (1.4 to 1.7 fold increase), and was absolutely required for 25-hydroxylase activity in fetuses. These data suggest that microsomal vitamin D 3 25-hydroxylase activity develops slowly and approaches full activity near the weaning stage. A cytosolic factor present as early as -3 days of age stimulates the activity of the microsomal vitamin D 3 25-hydroxylase

  20. 3D composite image, 3D MRI, 3D SPECT, hydrocephalus

    International Nuclear Information System (INIS)

    Mito, T.; Shibata, I.; Sugo, N.; Takano, M.; Takahashi, H.

    2002-01-01

    The three-dimensional (3D)SPECT imaging technique we have studied and published for the past several years is an analytical tool that permits visual expression of the cerebral circulation profile in various cerebral diseases. The greatest drawback of SPECT is that the limitation on precision of spacial resolution makes intracranial localization impossible. In 3D SPECT imaging, intracranial volume and morphology may vary with the threshold established. To solve this problem, we have produced complimentarily combined SPECT and helical-CT 3D images by means of general-purpose visualization software for intracranial localization. In hydrocephalus, however, the key subject to be studied is the profile of cerebral circulation around the ventricles of the brain. This suggests that, for displaying the cerebral ventricles in three dimensions, CT is a difficult technique whereas MRI is more useful. For this reason, we attempted to establish the profile of cerebral circulation around the cerebral ventricles by the production of combined 3D images of SPECT and MRI. In patients who had shunt surgery for hydrocephalus, a difference between pre- and postoperative cerebral circulation profiles was assessed by a voxel distribution curve, 3D SPECT images, and combined 3D SPECT and MRI images. As the shunt system in this study, an Orbis-Sigma valve of the automatic cerebrospinal fluid volume adjustment type was used in place of the variable pressure type Medos valve currently in use, because this device requires frequent changes in pressure and a change in pressure may be detected after MRI procedure. The SPECT apparatus used was PRISM3000 of the three-detector type, and 123I-IMP was used as the radionuclide in a dose of 222 MBq. MRI data were collected with an MAGNEXa+2 with a magnetic flux density of 0.5 tesla under the following conditions: field echo; TR 50 msec; TE, 10 msec; flip, 30ueK; 1 NEX; FOV, 23 cm; 1-mm slices; and gapless. 3D images are produced on the workstation TITAN

  1. Hodgkin's disease part 1: pathology, staging, and management of early stage disease

    International Nuclear Information System (INIS)

    Mauch, Peter; Yahalom, Joachim

    1995-01-01

    Over the past 25 years there have been dramatic improvements in our understanding of the epidemiology, biology, natural history, and treatment of Hodgkins disease. Hodgkin's disease is one of the few cancers where both chemotherapy and radiation therapy have provided dramatic improvements in cure of this once uniformly fatal disease. Part 1 of the refresher course on Hodgkin's disease will include a review of: 1) New Findings in epidemiology, immunohistochemistry and molecular biology of the Reed-Sternberg cell including association with Epstein-Barr virus; 2) Review of pathology including discussions of NS 1 vs NS2, and nodular LP subclassifications; 3) Recommendations for staging including the role of staging laparotomy in Hodgkin's disease; 4) Standard techniques for commonly used radiation therapy fields for Hodgkin's disease and 5) Treatment of early stage Hodgkin's disease including an overview on recent and current clinical trials

  2. Isolation and characterization of ScGluD2, a new sugarcane beta-1,3-glucanase D family gene induced by Sporisorium scitamineum, ABA, H2O2, NaCl, and CdCl2 stresses

    Directory of Open Access Journals (Sweden)

    Yachun Su

    2016-09-01

    Full Text Available Beta-1,3-glucanases (EC 3.2.1.39, commonly known as pathogenesis-related (PR proteins, play an important role not only in plant defense against fungal pathogens but also in plant physiological and developmental processes. However, only a limited number of sugarcane beta-1,3-glucanase genes have been isolated. In the present study, we identified and characterized a new beta-1,3-glucanase gene ScGluD2 (GenBank Acc No. KF664181 from sugarcane. An X8 domain was present at the C terminal region of ScGluD2, suggesting beta-1,3-glucan-binding function. Phylogenetic analysis showed that the predicted ScGluD2 protein was classified into subfamily D beta-1,3-glucanase. Localization of the ScGluD2 protein in the plasma membrane was determined by tagging it with green fluorescent protein. The expression of ScGluD2 was more up-regulated in sugarcane smut-resistant cultivars in the early stage (1 d or 3 d than in the susceptible ones after being challenged by the smut pathogen, revealing that ScGluD2 may be involved in defense against the invasion of Sporisorium scitamineum. Transient overexpression of ScGluD2 in Nicotiana benthamiana leaves induced a defense response and exhibited antimicrobial action on the tobacco pathogens Pseudomonas solanacearum and Botrytis cinerea, further demonstrating that ScGluD2 was related to the resistance to plant pathogens. However, the transcripts of ScGluD2 partially increased (12 h under NaCl stress, and were steadily up-regulated from 6 h to 24 h upon ABA, H2O2, and CdCl2 treatments, suggesting that ABA may be a signal molecule regulating oxidative stress and play a role in the salt and heavy metal stress-induced stimulation of ScGluD2 transcripts. Taken together, ScGluD2, a novel member of subfamily D beta-1,3-glucanase, was a stress-related gene of sugarcane involved in plant defense against smut pathogen attack and salt and heavy metal stresses.

  3. Synthesis of flavonol 3-O-glycoside by UGT78D1.

    Science.gov (United States)

    Ren, Guangxiang; Hou, Jingli; Fang, Qinghong; Sun, Hong; Liu, Xiaoyan; Zhang, Lianwen; Wang, Peng George

    2012-08-01

    Glycosylation is an important method for the structural modification of various flavonols, resulting in the glycosides with increased solubility, stability and bioavailability compared with the corresponding aglycone. From the physiological point of view, glycosylation of plant flavonoids is of importance and interest. However, it is notoriously complicated that flavonols such as quercetin, kaempferol and myricetin, are glucosylated regioselectively at the specific position by chemical method. Compared to the chemical method, enzymatic synthesis present several advantages, such as mild reaction condition, high stereo or region selectivity, no protection/deprotection and high yield. UGT78D1 is a flavonol-specific glycosyltransferase, responsible for transferring rhamnose or glucose to the 3-OH position in vitro. In this study, the activity of UGT78D1 was tested against 28 flavonoids acceptors using UDP-glucose as donor nucleoside in vitro, and 5 acceptors, quercetin, myricetin, kaempferol, fisetin and isorhamnetin, were discovered to be glucosylated at 3-OH position. Herein, the small-scale 3-O-glucosylated quercetin, kaempferol and myricetin were synthesized by UGT78D1 and their chemical structures were confirmed by (1)H and (13)C nuclear magnetic resonance (NMR) and high resolution mass spectrometry (HRMS).

  4. Correlation of 2 hour, 4 hour, 8 hour and 12 hour urine protein with 24 hour urinary protein in preeclampsia.

    Directory of Open Access Journals (Sweden)

    Savita Rani Singhal

    2014-09-01

    Full Text Available To find shortest and reliable time period of urine collection for determination of proteinuria.It is a prospective study carried out on 125 pregnant women with preeclampsia after 20 weeks of gestation having urine albumin >1 using dipstick test. Urine was collected in five different time intervals in colors labeled containers with the assistance of nursing staff; the total collection time was 24 hours. Total urine protein of two-hour, four-hour, eight-hour, 12-hour and 24-hour urine was measured and compared with 24-hour collection. Data was analyzed using the Pearson correlation coefficient.There was significant correlation (p value < 0.01 in two, four, eight and 12-hour urine protein with 24-urine protein, with correlation coefficient of 0.97, 0.97, 0.96 and 0.97, respectively. When a cut off value of 25 mg, 50 mg. 100 mg, and 150 mg for urine protein were used for 2-hour, 4-hours, 8-hour and 12-hour urine collection, a sensitivity of 92.45%, 95.28%, 91.51%, and 96.23% and a specificity of 68.42%, 94.74%, 84.21% and 84.21% were obtained, respectively.Two-hour urine proteins can be used for assessment of proteinuria in preeclampsia instead of gold standard 24-hour urine collection for early diagnosis and better patient compliance.

  5. Therapeutic PD-L1 and LAG-3 blockade rapidly clears established blood-stage Plasmodium infection

    Science.gov (United States)

    Butler, Noah S.; Moebius, Jacqueline; Pewe, Lecia L.; Traore, Boubacar; Doumbo, Ogobara K.; Tygrett, Lorraine T.; Waldschmidt, Thomas J.; Crompton, Peter D.; Harty, John T.

    2011-01-01

    Plasmodium infection of erythrocytes induces clinical malaria. Parasite-specific CD4+ T cells correlate with reduced parasite burdens and severity of human malaria, and are required to control blood-stage infection in mice. However, the characteristics of CD4+ T cells that determine protection or parasite persistence remain unknown. Here we show that P. falciparum infection of humans increased expression of an inhibitory receptor (PD-1) associated with T cell dysfunction. In vivo blockade of PD-L1 and LAG-3 restored CD4+ T cell function, amplified T follicular helper cell and germinal center B cell and plasmablast numbers, enhanced protective antibodies and rapidly cleared blood-stage malaria in mice. Thus, chronic malaria drives specific T cell dysfunction, which can be rescued to enhance parasite control using inhibitory therapies. PMID:22157630

  6. Phase correction for three-dimensional (3D) diffusion-weighted interleaved EPI using 3D multiplexed sensitivity encoding and reconstruction (3D-MUSER).

    Science.gov (United States)

    Chang, Hing-Chiu; Hui, Edward S; Chiu, Pui-Wai; Liu, Xiaoxi; Chen, Nan-Kuei

    2018-05-01

    Three-dimensional (3D) multiplexed sensitivity encoding and reconstruction (3D-MUSER) algorithm is proposed to reduce aliasing artifacts and signal corruption caused by inter-shot 3D phase variations in 3D diffusion-weighted echo planar imaging (DW-EPI). 3D-MUSER extends the original framework of multiplexed sensitivity encoding (MUSE) to a hybrid k-space-based reconstruction, thereby enabling the correction of inter-shot 3D phase variations. A 3D single-shot EPI navigator echo was used to measure inter-shot 3D phase variations. The performance of 3D-MUSER was evaluated by analyses of point-spread function (PSF), signal-to-noise ratio (SNR), and artifact levels. The efficacy of phase correction using 3D-MUSER for different slab thicknesses and b-values were investigated. Simulations showed that 3D-MUSER could eliminate artifacts because of through-slab phase variation and reduce noise amplification because of SENSE reconstruction. All aliasing artifacts and signal corruption in 3D interleaved DW-EPI acquired with different slab thicknesses and b-values were reduced by our new algorithm. A near-whole brain single-slab 3D DTI with 1.3-mm isotropic voxel acquired at 1.5T was successfully demonstrated. 3D phase correction for 3D interleaved DW-EPI data is made possible by 3D-MUSER, thereby improving feasible slab thickness and maximum feasible b-value. Magn Reson Med 79:2702-2712, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

  7. Sarmatian Attributes in Archaeological Complexes of Catacombs Burials in Arys Culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.

    Directory of Open Access Journals (Sweden)

    Podushkin Aleksandr Nikolaevich

    2015-12-01

    Full Text Available The publication is devoted to archaeological research of monuments of the catacomb of Arys culture of Southern Kazakhstan (1st Century B.C. - 3rd Century A.D.. Now scientists have a complete understanding of the range and typology, periodization and chronology of monuments of this culture. There are three stages: Karaultobe (4th century B.C. - 1st century A.D.; Karatobe (1st Century B.C. - 4th century A.D.; Altintobe (4th-6th centuries A.D.. These stages are characterized by specific clusters of signs in the form of artifacts. The author also carried out the ethnic attribution of the Arys culture in association with the ancient state Kangiuj. As a result of this work, the ethnicity of the state Kangiuj was revealed: in particular, late Saka’s, Sarmatian, Huns and Kangiuj ethnic components which are relevant to archaeological complexes, were identified. In the Arys monuments of culture the author discovered complexes of findings which associated with the Sarmatian world of Eurasia by their ethno-cultural parameters. They include typical for the Sarmatians list of ritual action and the funerary equipment, including weapons, bronze mirrors, ritual and religious objects, signs-tamgas, jewelry (including Egyptian faience, articles in “animal”, gold-turquoise and polychrome style. The characteristics of the burial complexes of catacombs of the Arys culture discussed in the publication and corresponding to chronological calculations and ethno-cultural interpretations, allow to speak about presence in the territory of South Kazakhstan of the Asian Sarmatians or any local branch of the Union of the Sarmatian tribes in the 1st century B.C. - 3rd century A.D.

  8. Headache prevalence and long working hours: the role of physical inactivity.

    Science.gov (United States)

    Sato, K; Hayashino, Y; Yamazaki, S; Takegami, M; Ono, R; Otani, K; Konno, S; Kikuchi, S; Fukuhara, S

    2012-07-01

    Headaches and long working hours are important issues for workers. This study investigated the association between hours worked and the prevalence of headaches, and how that association varies with physical activity. Cross-sectional study with two-stage cluster sampling. Using data from a nationally representative sample of households in Japan, people aged 20-65 years who worked ≥35 h/week were studied, and the cross-sectional association between the number of hours worked per week (35-45, 46-55 and >55 h/week) and the prevalence rates of headaches of different severity was evaluated. Of 721 workers, 307 reported experiencing at least one headache per month. Compared with working 35-45 h/week, the prevalence ratios of severe or disabling headaches among individuals working >55 h/week were 1.38 [95% confidence interval (CI) 1.06-1.78] and 1.63 (95% CI 1.09-2.43), respectively. After stratification by the level of physical activity, the prevalence ratios were greater in the low-physical-activity group: 1.56 (95% CI 1.11-2.19) for severe headaches and 2.20 (95% CI 1.31-3.68) for disabling headaches. The number of hours worked was not associated with headaches in the high-physical-activity group. Among workers in the general population, long working hours were associated with the prevalence of headaches, and the association may depend on a lack of physical activity. Copyright © 2012 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  9. Cellular reactions to three-dimensional matrices of polylactic acid and hydroxyapatite generated by 3D-printing

    Directory of Open Access Journals (Sweden)

    T. V. Druzhinina

    2016-01-01

    Full Text Available The purpose of this study is to estimate Ex vivo physicochemical and biological features of three-dimensional (3D biodegradable matrices “polylactic acid/calcium phosphates” (hereafter 3D composites designed with the help of additive technologies (3D printing as potential materials for bone tissue regeneration.Materials and methods. Experimental samples (disks 1,2–1,6 mm thick, and 11 mm or 8 mm in diameter of composite biodegradable 3D matrices (hereafter 3D composites have been produced from initial mixture of 95 mas% polylactic acid (PLA and 5 mas% hydroxyapatite (HAP. Computer-aided design method, Blender software and fused filament fabrication (FFF; fiber diameter 1,75 mm with 3D printing were used in sample production. 100 mas% PLA disks served as control. One of the sample surfaces was textured with 0,3–0,5 mm wide grooves. Physicochemical properties of 11 mm disks (geometry, mass, morphology, roughness, electrostatic voltage, surface wettability, and element composition were studied. Biological trials included the evaluation of 24-hour cytotoxicity of 8 mm samples in culture of mononuclear leukocytes of a healthy volunteer or human Jurkat T cell leukemia-derived cell line (hereafter Jurkat T cells. Moreover, osteogenic potential of 11 mm disks was determined in 21-day culture of human adipose-derived multipotent mesenchymal stem cells (AMMSCs be means of osteocalcin secretion and intercellular matrix mineralization visualized by alizarin red S staining.Results. The features of PLA-HAP 3D composites generated by 3D printing correspond to physicochemical parameters which are crucial for bone tissue recovery. In case of small amount of calcium and phosphorus they facilitated ex vivo mineralization of extracellular matrix formed in AMMSCs culture. The number of died (by necrosis, mainly leukemic Jurkat T cells but not mononuclear leukocytes of a health volunteer increased to 9–10% in 24-hour in vitro contact with PLA-HAP 3D

  10. Study comparing 3 hour and 24 hour post-operative removal of bladder catheter and vaginal pack following vaginal surgery: a randomised controlled trial.

    Science.gov (United States)

    Rajan, Priya; Soundara Raghavan, S; Sharma, Deepak

    2017-09-11

    Traditional practice after vaginal hysterectomy was to keep the vaginal pack and urinary catheter for 24 hours post operatively. But there were studies that prolonged cathterisation was associated with urinary infection. So this study was conducted to compare the post operative outcome when the urinary catheter and vaginal pack were removed after 3 hours and after 24 hours after surgery. The study was done in the Department of Obstetrics and Gynecology, in a tertiary teaching institute of South India from September 2008 to March 2010. It was a randomised controlled trial involving 200 women undergoing vaginal surgery, who were randomly assigned to 2 groups - catheter and vaginal pack were removed either in 3 h in study group or were removed in 24 h in control group. The outcome of the study were vaginal bleeding, urinary retention, febrile morbidity, and urinary infection. There was no significant difference between the study and control groups with respect to vaginal bleeding (0 and 1%, p = 1), urinary retention (9 and 4%, p = 0.15), febrile morbidity (7 and 4%, p = 0.35), and urinary infection (26% in each group, p = 1.0). Keeping the urinary catheter and vaginal pack for 24 h following vaginal surgery does not offer any additional benefit against removing them after 3 h.

  11. The development of 99mTc-d, 1-HM-PAO

    International Nuclear Information System (INIS)

    Bai Lanqin; Huang Jinjie; Fan Li; Bai Suzhen; Li Guoli; Jing Hui; Xiao Lun

    1991-12-01

    The 99m Tc-d,1-HM-PAO is an ideal radiopharmaceutical for regional cerebral blood perfusion imaging. The improvement of synthesis and separation of diastereoisomers leads to obtain high purity (>99%) of d, 1-HM-PAO and meso-HM-PAO. During separation H NMR spectroscopy was used to monitor the relative composition of these two diastereoisomers that can ensure the purity of pligand of d,1-HM-PAO. The intravenous injection of 99m Tc-d,1-HM-PAO was formed by adding fresh 99m Tc washing liquor into a sterile. Pyrogen-free and freeze-dried vial. The radiochemical purity (RCP) of 99m Tc-d,1-HM-PAO was greater than 80%. From the experiments of 99m Tc-d,1-HM-PAO in mice, after two minutes of intravenously (I>V>) administration about 2.24% of injected dose (I.D.)appeared in the brain, and after 24 hours about 72% of radioactivity of injected dose still left in the brain. But for the 99m Tc-meso-HM-PAO after two minutes of i.v. administration, about 1.93% of I.D. appeared in the brain, and 24 hours later, 25% of radioactivity of I.D. was in the brain. This result shows that in the brain the radioactivity of 99m Tc-meso-HM-PAO declines faster than that of 99m Td-d,1-HM-PAO

  12. Realistic non-local potentials from inverse scattering theory for the3S13D1nucleon-nucleon interaction

    Directory of Open Access Journals (Sweden)

    P.H.L. Groenenboom

    1978-03-01

    Full Text Available Rank-three and -four separable3S13D1potentials have been constructed which reproduce the experimental phase shifts and a realistic deuteron wave function. The off-shell behaviour has been investigated and triton binding energies were calculated.

  13. Simulator sickness analysis of 3D video viewing on passive 3D TV

    Science.gov (United States)

    Brunnström, K.; Wang, K.; Andrén, B.

    2013-03-01

    The MPEG 3DV project is working on the next generation video encoding standard and in this process a call for proposal of encoding algorithms was issued. To evaluate these algorithm a large scale subjective test was performed involving Laboratories all over the world. For the participating Labs it was optional to administer a slightly modified Simulator Sickness Questionnaire (SSQ) from Kennedy et al (1993) before and after the test. Here we report the results from one Lab (Acreo) located in Sweden. The videos were shown on a 46 inch film pattern retarder 3D TV, where the viewers were using polarized passive eye-glasses to view the stereoscopic 3D video content. There were 68 viewers participating in this investigation in ages ranges from 16 to 72, with one third females. The questionnaire was filled in before and after the test, with a viewing time ranging between 30 min to about one and half hour, which is comparable to a feature length movie. The SSQ consists of 16 different symptoms that have been identified as important for indicating simulator sickness. When analyzing the individual symptoms it was found that Fatigue, Eye-strain, Difficulty Focusing and Difficulty Concentrating were significantly worse after than before. SSQ was also analyzed according to the model suggested by Kennedy et al (1993). All in all this investigation shows a statistically significant increase in symptoms after viewing 3D video especially related to visual or Oculomotor system.

  14. Agarose hydrogel induced MCF-7 and BMG-1 cell line progressive 3D and 3D revert cultures.

    Science.gov (United States)

    Subramaniyan, Aishwarya; Ravi, Maddaly

    2018-04-01

    3D culture systems have enhanced the utility of cancer cell lines as they are considered closer to the in vivo systems. A variety of changes are induced in cells cultured in 3D systems; an apparent and striking feature being the spontaneous acquisition of distinct morphological entities. 3D reverts (3DRs) can be obtained by introducing 3D aggregates in scaffold/matrix-free culture units. It could be seen that the two cell lines used in this study exhibited differences in 3DR structures, though both were cultured on agarose hydrogels. Also, differences in 3DR formation, growth and survival were different. While 3D aggregates of several cell lines have been reported for a variety of studies, there are no studies that describe or utilize 3DRs. 3DRs can provide insights into complex events that can occur in cancer cells; especially as material to study metastasis, migration, and invasion. © 2017 Wiley Periodicals, Inc.

  15. Overexpression of TaNAC2D displays opposite responses to abiotic stresses between seedling and mature stage of transgenic Arabidopsis

    Directory of Open Access Journals (Sweden)

    Quanjun Huang

    2016-11-01

    Full Text Available Environmental stresses frequently affect plant growth and development, and many genes have been found to be induced by unfavorable environmental conditions. Here, we reported the biological functions of TaNAC2D, a stress-related NAC (NAM, ATAF, and CUC gene from wheat. TaNAC2D showed transcriptional activator activity in yeast. TaNAC2D-GFP fusion protein was localized in the nucleus of wheat mesophyll protoplasts. TaNAC2D transcript abundance was significantly induced by NaCl, PEG6000, and abscisic acid (ABA at seedling stage, and repressed by NaCl and PEG6000 at mature plant stage. When TaNAC2D was introduced into Arabidopsis, the 35-day-old soil-grown TaNAC2D-overexpression (TaNAC2D-OX plants displayed slower stomatal closure, higher water loss rate, and more sensitivity to salt and drought stresses compared with WT plants. In contrast, TaNAC2D-OX seedlings, grown on 1/2 MS medium supplemented with different concentrations of NaCl, Mannitol, and MV, had enhanced tolerances to salt, osmotic and oxidative stresses during seed germination and post-germination periods. The opposite stress-responsive phenotypes of transgenic Arabidopsis were consistent with the expression patterns of TaNAC2D in wheat. Moreover, under high salinity and dehydration conditions, three marker genes, including NCED3, RD29A, and RD29B, were down-regulated in 35-d-old TaNAC2D-OX plants grown in soil and up-regulated in 14-d-old TaNAC2D-OX seedlings grown on 1/2 MS medium. Our results suggest that the change in growth stages and environmental conditions may regulate TaNAC2D’s function.

  16. Vitamin D receptor B1 and exon 1d: functional and evolutionary analysis.

    Science.gov (United States)

    Gardiner, Edith M; Esteban, Luis M; Fong, Colette; Allison, Susan J; Flanagan, Judith L; Kouzmenko, Alexander P; Eisman, John A

    2004-05-01

    The vitamin D receptor (VDR) shares a conserved structural and functional organization with other nuclear receptor (NR) superfamily members. For many NRs, N-terminal variant isoforms that display distinct cell-, stage- and promoter-specific actions have been identified. The novel VDR isoform VDRB1, with a 50 amino acid N-terminal extension, is produced from low abundance transcripts that contain exon 1d of the human VDR locus. There is evidence for the conservation of this exon in other mammalian and avian species. The transactivation differences between VDRB1 and the original VDR, clarified here, provide insights into mechanisms that may contribute to functional differences and potentially distinct physiological roles for these two VDR isoforms.

  17. 3D and 1D calculation of hysteresis loops and energy products for anisotropic nanocomposite films with perpendicular anisotropy

    International Nuclear Information System (INIS)

    Yuan, X.H.; Zhao, G.P.; Yue, Ming; Ye, L.N.; Xia, J.; Zhang, X.C.; Chang, J.

    2013-01-01

    In this paper, the magnetic reversal process, hysteresis loops and energy products for exchange-coupled Nd 2 Fe 14 B/α-Fe bilayers are studied systematically by a three-dimensional (3D) model. The 3D calculations are numerically solved using the finite difference method, where the results are carefully compared with those calculated by one-dimensional (1D) model. It is found that the calculated hysteresis loops and energy products based on the two methods are consistent with each other. Both nucleation fields and coercivities decrease monotonically as the soft layer thickness L s increases. In addition, the calculated spatial distributions of magnetization orientations in the thickness direction at various applied fields based on both methods signify a three-step magnetic reversal process, which are nucleation, growth and displacement of the domain wall. The calculated magnetic orientations within the film plane, however, are totally different according to the two methods. The 3D calculation exhibits a process of vortex formation and annihilation. On the other hand, the 1D calculation gives a quasi-coherent one, where magnetization orientation is coherent in the film plane and varies in the thickness direction. This new reversal mechanism displayed in the film plane has a systematic influence on the nucleation fields, coercivity and energy products. - Highlights: • Consistent hysteresis loops and energy products for 3D and 1D calculation. • Domain wall formation, evolution and displacement perpendicular to the film plane. • Vortex formation, annihilation and better loop squareness in 3D calculation. • Larger nucleation fields, remanence and smaller coercivity in 3D calculation

  18. Computerized liver volumetry on MRI by using 3D geodesic active contour segmentation.

    Science.gov (United States)

    Huynh, Hieu Trung; Karademir, Ibrahim; Oto, Aytekin; Suzuki, Kenji

    2014-01-01

    Our purpose was to develop an accurate automated 3D liver segmentation scheme for measuring liver volumes on MRI. Our scheme for MRI liver volumetry consisted of three main stages. First, the preprocessing stage was applied to T1-weighted MRI of the liver in the portal venous phase to reduce noise and produce the boundary-enhanced image. This boundary-enhanced image was used as a speed function for a 3D fast-marching algorithm to generate an initial surface that roughly approximated the shape of the liver. A 3D geodesic-active-contour segmentation algorithm refined the initial surface to precisely determine the liver boundaries. The liver volumes determined by our scheme were compared with those manually traced by a radiologist, used as the reference standard. The two volumetric methods reached excellent agreement (intraclass correlation coefficient, 0.98) without statistical significance (p = 0.42). The average (± SD) accuracy was 99.4% ± 0.14%, and the average Dice overlap coefficient was 93.6% ± 1.7%. The mean processing time for our automated scheme was 1.03 ± 0.13 minutes, whereas that for manual volumetry was 24.0 ± 4.4 minutes (p volumetry based on our automated scheme agreed excellently with reference-standard volumetry, and it required substantially less completion time.

  19. CAD and 3d-printing integration experience in the curriculum of engineers education

    Directory of Open Access Journals (Sweden)

    V. V. Zelentsov

    2016-01-01

    the Slicer program. The part-model manufacture cycle requires approximately from 2 to 3 hours per a component (from 1 to 1.5 hours for 3d-printing in that account. Large-scale blocks shall represent an assembly (containing a block body and a lid to reduce the printing-plastic consumption. Average printing-plastic consumption is about 1 kg per a configuration model. The obtained 3d-printing experience shows that the printing speed is much more important than the printing accuracy for the given educational problem.The obtained educational-methodology test results are considered to be a success. It is recommended to purchase an additional high-productivity 3d-printer facility providing an effective fascinating spacecraftconfiguration process.

  20. Reduction of the LVEF measured with gSPECT after 1-3 hours after physical exercise in CAD

    International Nuclear Information System (INIS)

    Cholewinski, W.; Stefaniak, B.; Poniatowicz-Frasunek, E.; Tarkowska, A.

    2004-01-01

    Aim: It has been shown that exercise may lead to the myocardial stunning with reduction of LVEF, persisting for some time despite recovery of perfusion. The aim of this study was to check whether the post-stress decrease of LVEF lasts as long as 3h after exercise. Patients, methods: The study was performed in 46 patients with CAD and in 10 normals (NMS). All patients underwent myocardial gSPECT after 99m Tc-tetrofosmin injection at rest and during stress with 2-day protocol. SPECT was started 1h after tracer injection at rest (R) and twice: 1h (S1) and 3hs(S3) after injection at stress. LVEF was calculated by the method of Germano et al. Results: All LVEF values were significantly lower in CAD patients than in the control group. In NMS mean LVEF was at rest similar to those obtained 1h and 3h after stress injection (59.0 ± 4.1, 60.0 ± 5.9, 58.0 ± 4.6, respectively; p > 0.05). A post-exercise decrease of LVEF was observed in 2 normal patients both at S1 and at S3. In CAD group LVEF values were lower at S1 than at R (50.8 ± 13.6 versus 49.3 ± 12.8; p < 0.05) and at S3 were lower than at S1 (49.3 ± 12.8 versus 46.0 ± 12.2; p < 0.001). A significant decrease of LVEF was found in 18/46 patients 1h post stress and in 36/46 3h post stress. In patients with reversible perfusion decrease, a significant correlation was found between post-exercise deterioration of perfusion and post-exercise LVEF reduction both at S1 (r = 0.744; p < 0.02) and at S3 (r = 0.734; p < 0.02). Stress induced decrease in LVEF correlated also with severity of perfusion abnormalities. Conclusions: In the majority of patients with CAD physical stress applied for diagnostic purposes results in an impairment of the LV function. A decrease of the LVEF is observed 1h after exercise, but it increases in frequency and grows stronger during the next 2h.The post-stress LVEF reduction is related to the severity of perfusion abnormalities. Patients with CAD who underwent diagnostic stress test should

  1. Identification and determination of D3 vitamine, D3 vitamine 25 (OH) and D3 vitamine 1,25(OH)2 in plasma of animals treated with solanum glaucophyllum (Sg)

    International Nuclear Information System (INIS)

    Pawlak, Eva

    1997-01-01

    The enzootic calcinosis is a disease produced in the bovines by the ingestion of the toxic plant Sg, which contains vitamine D 3 glycosides and its active metabolites. This disease is characterized by the loss of weight and physical condition, motor disorders and alteration of phosphocalcic metabolism with deposition of calcium compounds in soft tissues. To contribute to the advanced diagnostic of the disease, analytic techniques to determine D vitamine, D vitamine 25 (OH) and D vitamine 1,25 (OH) 2 in plasma, by high resolution liquid chromatography and radio receptor essay are used

  2. Decrease in Urinary Creatinine Excretion in Early Stage Chronic Kidney Disease

    Science.gov (United States)

    Tynkevich, Elena; Flamant, Martin; Haymann, Jean-Philippe; Metzger, Marie; Thervet, Eric; Boffa, Jean-Jacques; Vrtovsnik, François; Houillier, Pascal; Froissart, Marc; Stengel, Bénédicte

    2014-01-01

    Background Little is known about muscle mass loss in early stage chronic kidney disease (CKD). We used 24-hour urinary creatinine excretion rate to assess determinants of muscle mass and its evolution with kidney function decline. We also described the range of urinary creatinine concentration in this population. Methods We included 1072 men and 537 women with non-dialysis CKD stages 1 to 5, all of them with repeated measurements of glomerular filtration rate (mGFR) by 51Cr-EDTA renal clearance and several nutritional markers. In those with stage 1 to 4 at baseline, we used a mixed model to study factors associated with urinary creatinine excretion rate and its change over time. Results Baseline mean urinary creatinine excretion decreased from 15.3±3.1 to 12.1±3.3 mmol/24 h (0.20±0.03 to 0.15±0.04 mmol/kg/24 h) in men, with mGFR falling from ≥60 to creatinine excretion at baseline. Mean annual decline in mGFR was 1.53±0.12 mL/min/1.73 m2 per year and that of urinary creatinine excretion rate, 0.28±0.02 mmol/24 h per year. Patients with fast annual decline in mGFR of 5 mL/min/1.73 m2 had a decrease in urinary creatinine excretion more than twice as big as in those with stable mGFR, independent of changes in urinary urea as well as of other determinants of low muscle mass. Conclusions Decrease in 24-hour urinary creatinine excretion rate may appear early in CKD patients, and is greater the more mGFR declines independent of lowering protein intake assessed by 24-hour urinary urea. Normalizing urine analytes for creatininuria may overestimate their concentration in patients with reduced kidney function and low muscle mass. PMID:25401694

  3. Programmable level-1 trigger with 3D-Flow processor array

    International Nuclear Information System (INIS)

    Crosetto, D.

    1994-01-01

    The 3D-Flow parallel processing system is a new concept in processor architecture, system architecture, and assembly architecture. Compared to the electronics used in present systems, this approach reduces the cost and complexity of the hardware and allows easy assembly, disassembly, incremental upgrading, and maintenance of different interconnection topologies. The 3D-Flow parallel-processing system benefits high energy physics (HEP) by allowing: (1) common less costly hardware to be used in different experiments. (2) new uses of existing installations. (3) tuning of trigger based on the first analyzed data, and (4) selection of desired events directly from raw data. The goal of this parallel-processing architecture is to acquire multiple data in parallel (up to 100 million frames per second) and to process them at high speed, accomplishing digital filtering on the input data, pattern recognition (particle identification), data moving, and data formatting. The main features of the system are its programmability, scalability, high-speed communication, and low cost. The compactness of the 3D-Flow parallel-processing system in concert with the processor architecture allows processor interconnections to be mapped into the geometry of sensors (detectors in HEP) without large interconnection signal delay, enabling real-time pattern recognition. The overall 3D-Flow project has passed a major design review at Fermilab (Reviewers included experts in computers, triggering, system assembly, and electronics)

  4. β-D-(1→4), β-D-(13) 'mixed linkage' xylans from red seaweeds of the order Nemaliales and Palmariales.

    Science.gov (United States)

    Viana, Adriano G; Noseda, Miguel D; Gonçalves, Alan G; Duarte, Maria Eugênia R; Yokoya, Nair; Matulewicz, Maria C; Cerezo, Alberto S

    2011-06-01

    Xylans from five seaweeds belonging to the order Nemaliales (Galaxaura marginata, Galaxaura obtusata, Tricleocarpacylindrica, Tricleocarpa fragilis, and Scinaia halliae) and one of the order Palmariales (Palmaria palmata) collected on the Brazilian coasts were extracted with hot water and purified from acid xylomannans and/or xylogalactans through Cetavlon precipitation of the acid polysaccharides. The β-D-(1→4), β-D-(13) 'mixed linkage' structures were determined using methylation analysis and 1D and 2D NMR spectroscopy. The presence of large sequences of β-(1→4)-linked units suggests transient aggregates of ribbon- or helical-ordered structures that would explain the low optical rotations. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Preoperative chemoradiotherapy for stage 2 or 3 esophageal squamous cell carcinoma

    International Nuclear Information System (INIS)

    Kawai, Takaharu; Kochi, Mitsugu; Fujii, Masashi

    2016-01-01

    The goal of this retrospective study was to investigate the efficacy and safety of preoperative chemoradiotherapy (NACR) in patients with Stage 2 or Stage 3 esophageal squamous cell carcinoma (SCC). Between 2004 and 2014, a total of 86 patients underwent surgical resection in conjunction with NACR for esophageal SCC at our institute. Thirty-one patients (36.0%) had Stage 2 disease and 55 patients (64.0%) had Stage 3 disease. The median age was 64 (43-81) years. A total of 78 patients received the full NACR regimen. The most common major Grade 3 hematologic toxic effects of NACR were leukopenia and neutropenia (48 cases), while the most common major Grade 3 non-hematologic toxic effect was anorexia (12 cases). One patient died in the hospital and no patients died within 30 days after surgery. A pathological complete response was achieved in 23 cases. Pathological staging (number of cases) was Stage 0 (23), Stage 1 (8), Stage 2 (28), Stage 3 (25), and Stage 4 (2). The 5-year overall survival rate (OS) was 51.0%, and was 83.2% in Stage 2 patients and 29.9% in Stage 3 patients. Preoperative NACR is safe and may improve OS and down-staging rates in patients with esophageal SCC. (author)

  6. Polymorphic Human Sulfotransferase 2A1 Mediates the Formation of 25-Hydroxyvitamin D3-3-O-Sulfate, a Major Circulating Vitamin D Metabolite in Humans.

    Science.gov (United States)

    Wong, Timothy; Wang, Zhican; Chapron, Brian D; Suzuki, Mizuki; Claw, Katrina G; Gao, Chunying; Foti, Robert S; Prasad, Bhagwat; Chapron, Alenka; Calamia, Justina; Chaudhry, Amarjit; Schuetz, Erin G; Horst, Ronald L; Mao, Qingcheng; de Boer, Ian H; Thornton, Timothy A; Thummel, Kenneth E

    2018-04-01

    Metabolism of 25-hydroxyvitamin D 3 (25OHD 3 ) plays a central role in regulating the biologic effects of vitamin D in the body. Although cytochrome P450-dependent hydroxylation of 25OHD 3 has been extensively investigated, limited information is available on the conjugation of 25OHD 3 In this study, we report that 25OHD 3 is selectively conjugated to 25OHD 3 -3- O -sulfate by human sulfotransferase 2A1 (SULT2A1) and that the liver is a primary site of metabolite formation. At a low (50 nM) concentration of 25OHD 3 , 25OHD 3 -3- O -sulfate was the most abundant metabolite, with an intrinsic clearance approximately 8-fold higher than the next most efficient metabolic route. In addition, 25OHD 3 sulfonation was not inducible by the potent human pregnane X receptor agonist, rifampicin. The 25OHD 3 sulfonation rates in a bank of 258 different human liver cytosols were highly variable but correlated with the rates of dehydroepiandrosterone sulfonation. Further analysis revealed a significant association between a common single nucleotide variant within intron 1 of SULT2A1 (rs296361; minor allele frequency = 15% in whites) and liver cytosolic SULT2A1 content as well as 25OHD 3 -3- O -sulfate formation rate, suggesting that variation in the SULT2A1 gene contributes importantly to interindividual differences in vitamin D homeostasis. Finally, 25OHD 3 -3- O -sulfate exhibited high affinity for the vitamin D binding protein and was detectable in human plasma and bile but not in urine samples. Thus, circulating concentrations of 25OHD 3 -3- O -sulfate appear to be protected from rapid renal elimination, raising the possibility that the sulfate metabolite may serve as a reservoir of 25OHD 3 in vivo, and contribute indirectly to the biologic effects of vitamin D. Copyright © 2018 by The American Society for Pharmacology and Experimental Therapeutics.

  7. Biosynthesis, purification and receptor binding properties of high specific radioactivity 1α,24(R), 25-trihydroxy-[26,27-methyl-3H]-vitamin D3

    International Nuclear Information System (INIS)

    Chandler, J.S.; Pike, J.W.; Haussler, M.R.

    1982-01-01

    A procedure for the biosynthesis and purification of 1α,24(R),25-trihydroxy[26,27-methyl- 3 H]-vitamin D 3 (1,24,25-(OH) 3 [ 3 H]D 3 ) is reported. A kidney homogenate from chicks receiving a high calcium diet (3%) and oral supplements of 1α,25-dihydroxyvitamin D 3 (1,25-(OH) 2 D 3 ) was used for C-24-hydroxylation of 1α,25-dihydroxy[26,27-methyl- 3 H]-vitamin D 3 (1,25-(OH) 2 [ 3 H]D 3 ), in vitro. Extraction and purification of the homogenate lipid fraction by Sephadex LH-20 and high performance liquid chromatography yielded radiochemically pure 1,24,25-(OH) 3 [ 3 H]D 3 with a specific radioactivity equivalent to the initial substrate (166 Ci/mmol). The authenticity of the generated metabolite was assessed by co-migration with synthetic 1,24,25-(OH) 3 D 3 on high performance liquid chromatography and by equimolar competition with authentic radioinert 1,24,25-(OH) 3 D 3 for binding to a purified receptor protein from rat kidney. Binding studies indicate the trihydroxylated metabolite competes 40-50% as effectively as 1,25-(OH) 2 D 3 for hormone binding sites. Further analysis of 1,24,25-(OH) 3 D 3 -receptor interaction reveals a high-affinity, saturable binding with an apparent Ksub(d) of 2.2 x 10 -9 M. These studies demonstrate that although slightly less active than 1,25-(OH) 2 D 3 , 1,24,25-(OH) 3 D 3 is capable of hormone-like interactions, in vitro. The availability of this high specific radioactivity sterol should allow for clarification of its potential physiologic significance. (author)

  8. Biochemical characterization of a D-psicose 3-epimerase from Treponema primitia ZAS-1 and its application on enzymatic production of D-psicose.

    Science.gov (United States)

    Zhang, Wenli; Zhang, Tao; Jiang, Bo; Mu, Wanmeng

    2016-01-15

    The rare sugar D-psicose is a hexoketose monosaccharide and a C-3 epimer of D-fructose. D-Psicose is a novel functional sweetener with 70% of the sweetness but only 0.3% of the energy content of sucrose. Generally, the industrial production of D-psicose involves a bioconversion from D-fructose induced by ketose 3-epimerases. The D-psicose 3-epimerase (DPEase) gene from Treponema primitia ZAS-1 (Trpr-DPEase) was cloned and overexpressed in Escherichia coli BL21 (DE3). The recombinant enzyme was purified with a molecular mass of 33 kDa. Trpr-DPEase exhibited optimal activity at pH 8.0 and 70 °C and was sensitive to temperature, with relative thermal stability below 50 °C. It was strictly metal-dependent and displayed maximum catalytic activity with 450 µmol L(-1) Co(2+). The Km values of the enzyme for D-psicose and D-fructose were 209 and 279 mmol L(-1) respectively. The D-psicose/D-fructose equilibrium ratio of Trpr-DPEase was 28:72. A novel DPEase from T. primitia ZAS-1 was characterized that could catalyze the formation of D-psicose from D-fructose. D-Psicose was produced at a yield of 137.5 g L(-1) from 500 g L(-1) D-fructose, suggesting that Trpr-DPEase might be appropriate for the industrial production of D-psicose. © 2015 Society of Chemical Industry.

  9. Convenient large-scale synthesis of D-glucaro-1,4:6,3-dilactone.

    Science.gov (United States)

    Gehret, Troy C; Frobese, A Stephen; Zerbe, James S; Chenault, H Keith

    2009-11-06

    Calcium D-glucarate was converted into D-glucaro-1,4:6,3-dilactone on 32-g, 1-kg, and 22-kg scale, using azeotropic distillation with methyl isobutyl ketone to drive the dehydration. The crystalline product was > or = 99.5% pure by GC and NMR, and overall yield was as high as 72%.

  10. Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies

    Energy Technology Data Exchange (ETDEWEB)

    Stojanović, Zoran S.; Ignjatović, Nenad [Centre for Fine Particles Processing and Nanotechnologies, Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihailova 35/4, 11000 Belgrade (Serbia); Wu, Victoria [Advanced Materials and Nanobiotechnology Laboratory, Department of Bioengineering, University of Illinois, 851 South Morgan Street, Chicago, IL 60607-7052 (United States); Žunič, Vojka [Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Veselinović, Ljiljana [Centre for Fine Particles Processing and Nanotechnologies, Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihailova 35/4, 11000 Belgrade (Serbia); Škapin, Srečo [Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Miljković, Miroslav [Laboratory for Electron Microscopy, Faculty of Medicine University of Niš, Dr. Zoran Đinđić Boulevard 81, 18 000 Niš (Serbia); Uskoković, Vuk [Advanced Materials and Nanobiotechnology Laboratory, Department of Bioengineering, University of Illinois, 851 South Morgan Street, Chicago, IL 60607-7052 (United States); Department of Biomedical and Pharmaceutical Sciences, School of Pharmacy, Chapman University, 9401 Jeronimo Road, Irvine, CA 92618-1908 (United States); and others

    2016-11-01

    Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process. The one-pot process, yielding HA structures composed of bundles of ribbons and wires, was typified by the simultaneous occurrence of a multitude of intermediate reactions, failing to meet the uniformity criteria over particle morphology and size. To overcome these issues, the preparation procedure was divided to two stages: dicalcium phosphate platelets synthesized in the first step were used as a precursor for the synthesis of 1D HA in the second stage. Despite the elongated particle morphologies, both the precursor and the final product exhibited excellent biocompatibility and caused no reduction of viability when tested against osteoblastic MC3T3-E1 cells in 2D culture up to the concentration of 2.6 mg/cm{sup 2}. X-ray powder diffraction combined with a range of electron microscopies and laser diffraction analyses was used to elucidate the formation mechanism and the microstructure of the final particles. The two-step synthesis involved a more direct transformation of DCP to 1D HA with the average diameter of 37 nm and the aspect ratio exceeding 100:1. The comparison of crystalline domain sizes along different crystallographic directions showed no signs of significant anisotropy, while indicating that individual nanowires are ordered in bundles in the b crystallographic direction of the P6{sub 3/m} space group of HA. Intermediate processes, e.g., dehydration of dicalcium phosphate, are critical for the formation of 1D HA alongside other key aspects of this phase transformation, it must be investigated in more detail in the

  11. Eff icient energy back transfer from Ce{sup 3+} 5d state to Pr{sup 3+} {sup 1}D{sub 2} level in Lu{sub 3}Al{sub 5}O{sub 12} upon Pr{sup 3+} 4f5d excitation

    Energy Technology Data Exchange (ETDEWEB)

    Dan Wu [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Hao, Zhendong; Zhang, Xia; Pan, Guo-Hui; Luo, Yongshi; Zhang, Ligong; Zhao, Haifeng [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China); Zhang, Jiahua, E-mail: zhangjh@ciomp.ac.cn [State Key Laboratory of Luminescence and Applications, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, Jilin (China)

    2017-06-15

    The step energy transfers from Pr{sup 3+} 4f5d state to Ce{sup 3+} 5d state followed by energy back transfer from Ce{sup 3+} 5d state to Pr{sup 3+} {sup 1}D{sub 2} level are studied. The Ce{sup 3+}→Pr{sup 3+} energy back transfer upon Pr{sup 3+} 4f5d excitation is found to be more efficient than the normal Ce{sup 3+}→Pr{sup 3+} energy transfer upon Ce{sup 3+} 5d excitation. The efficient energy back transfer is attributed to preferential excitation of the Ce{sup 3+} ion with an adjacent Pr{sup 3+} surrounding in Pr{sup 3+}→Ce{sup 3+} energy transfer of the first step, whereas Ce{sup 3+} is excited randomly in the normal energy transfer. The efficiencies of Ce{sup 3+}→Pr{sup 3+} energy back transfer as a function of Ce{sup 3+} and Pr{sup 3+} concentration are evaluated, respectively.

  12. Enzyme-Linked Immunosorbent Assay Specific for (1→6) Branched, (13)-β-d-Glucan Detection in Environmental Samples

    OpenAIRE

    Milton, Donald K.; Alwis, K. Udeni; Fisette, Leslie; Muilenberg, Michael

    2001-01-01

    (13)-β-d-Glucans have been recognized as a potential causative agent responsible for bioaerosol-induced respiratory symptoms observed in both indoor and occupational environments. A specific enzyme immunoassay was developed to quantify (1→6) branched, (13)-β-d-glucans in environmental samples. The assay was based on the use of a high-affinity receptor (galactosyl ceramide) specific for (13)-β-d-glucans as a capture reagent and a monoclonal antibody specific for fungal cell wall β-d-glucans...

  13. Cav1.3 channels control D2-autoreceptor responses via NCS-1 in substantia nigra dopamine neurons

    Science.gov (United States)

    Dragicevic, Elena; Poetschke, Christina; Duda, Johanna; Schlaudraff, Falk; Lammel, Stephan; Schiemann, Julia; Fauler, Michael; Hetzel, Andrea; Watanabe, Masahiko; Lujan, Rafael; Malenka, Robert C.; Striessnig, Joerg

    2014-01-01

    Dopamine midbrain neurons within the substantia nigra are particularly prone to degeneration in Parkinson’s disease. Their selective loss causes the major motor symptoms of Parkinson’s disease, but the causes for the high vulnerability of SN DA neurons, compared to neighbouring, more resistant ventral tegmental area dopamine neurons, are still unclear. Consequently, there is still no cure available for Parkinson’s disease. Current therapies compensate the progressive loss of dopamine by administering its precursor l-DOPA and/or dopamine D2-receptor agonists. D2-autoreceptors and Cav1.3-containing L-type Ca2+ channels both contribute to Parkinson’s disease pathology. L-type Ca2+ channel blockers protect SN DA neurons from degeneration in Parkinson’s disease and its mouse models, and they are in clinical trials for neuroprotective Parkinson’s disease therapy. However, their physiological functions in SN DA neurons remain unclear. D2-autoreceptors tune firing rates and dopamine release of SN DA neurons in a negative feedback loop through activation of G-protein coupled potassium channels (GIRK2, or KCNJ6). Mature SN DA neurons display prominent, non-desensitizing somatodendritic D2-autoreceptor responses that show pronounced desensitization in PARK-gene Parkinson’s disease mouse models. We analysed surviving human SN DA neurons from patients with Parkinson’s disease and from controls, and detected elevated messenger RNA levels of D2-autoreceptors and GIRK2 in Parkinson’s disease. By electrophysiological analysis of postnatal juvenile and adult mouse SN DA neurons in in vitro brain-slices, we observed that D2-autoreceptor desensitization is reduced with postnatal maturation. Furthermore, a transient high-dopamine state in vivo, caused by one injection of either l-DOPA or cocaine, induced adult-like, non-desensitizing D2-autoreceptor responses, selectively in juvenile SN DA neurons, but not ventral tegmental area dopamine neurons. With pharmacological

  14. 3DSEM: A 3D microscopy dataset

    Directory of Open Access Journals (Sweden)

    Ahmad P. Tafti

    2016-03-01

    Full Text Available The Scanning Electron Microscope (SEM as a 2D imaging instrument has been widely used in many scientific disciplines including biological, mechanical, and materials sciences to determine the surface attributes of microscopic objects. However the SEM micrographs still remain 2D images. To effectively measure and visualize the surface properties, we need to truly restore the 3D shape model from 2D SEM images. Having 3D surfaces would provide anatomic shape of micro-samples which allows for quantitative measurements and informative visualization of the specimens being investigated. The 3DSEM is a dataset for 3D microscopy vision which is freely available at [1] for any academic, educational, and research purposes. The dataset includes both 2D images and 3D reconstructed surfaces of several real microscopic samples. Keywords: 3D microscopy dataset, 3D microscopy vision, 3D SEM surface reconstruction, Scanning Electron Microscope (SEM

  15. Predictors of Vitamin D Deficiency in Predialysis Patients with Stage ...

    African Journals Online (AJOL)

    2018-02-07

    2017 Nigerian Journal of Clinical Practice | Published by Wolters Kluwer ‑ Medknow. Objective: ... Serum 25(OH)D levels of patients in Stage 4 and Stage 5 CKD were lower than ... [Downloaded free from http://www.njcponline.com on Wednesday, February 7, 2018, ... angiotensin-converting enzyme inhibitors or angiotensin.

  16. Regulation of Motility, Invasion and Metastatic Potential of Squamous Cell Carcinoma by 1,25D3

    Science.gov (United States)

    Ma, Yingyu; Yu, Wei-Dong; Su, Bing; Seshadri, Mukund; Luo, Wei; Trump, Donald L.; Johnson, Candace S.

    2012-01-01

    BACKGROUND 1,25D3, the active metabolite of vitamin D, has been shown to exhibit broad spectrum anti-tumor activity in xenograft animal models. However, its activity against metastatic disease has not been extensively investigated. METHODS Squamous cell carcinoma (SCC) or 1,25D3-resistant variant SCC-DR cells were treated with 1,25D3. Actin organization was examined by immunofluorescence assay. Cell migration was assessed by “wound” healing and chemotactic migration assay. Cell invasion was assessed by Matrigel-based invasion assay and in situ zymography. MMP-2 and MMP-9 expression and secretion was examined by immunoblot analysis and ELISA, respectively. E-cadherin expression was assessed by flow cytometry, immunoblot analysis and immunohistochemistry. Knockdown of E-cadherin was achieved by siRNA. Experimental metastasis mouse model was done by intravenous injection of tumor cells. Lung tumor development was assessed by magnetic resonance imaging, gross observation and histology. RESULTS SCC cellular morphology and actin organization were altered by 10 nM of 1,25D3. 1,25D3 inhibited SCC cell motility and invasion, which was associated with reduced expression and secretion of MMP-2 and MMP-9. 1,25D3 promoted the expression of E-cadherin. These findings were not observed in SCC-DR cells. Knock down of E-cadherin rescued 1,25D3-inhibited cell migration. Intravenous injection of SCC or SCC-DR cells resulted in the establishment of extensive pulmonary lesions in saline-treated C3H mice. Treatment with 1,25D3 resulted in a marked reduction in the formation of lung tumor colonies in animals injected with SCC but not SCC-DR cells. CONCLUSIONS 1,25D3 suppresses SCC cell motility, invasion and metastasis, partially through the promotion of E-cadherin-mediated cell-cell adhesion. PMID:22833444

  17. FGF1 and IGF1-conditioned 3D culture system promoted the amplification and cancer stemness of lung cancer cells.

    Science.gov (United States)

    Liu, Pengpeng; Zhang, Rui; Yu, Wenwen; Ye, Yingnan; Cheng, Yanan; Han, Lei; Dong, Li; Chen, Yongzi; Wei, Xiyin; Yu, Jinpu

    2017-12-01

    Lung cancer stem cells (LCSCs) are considered as the cellular origins of metastasis and relapse of lung cancer. However, routine two-dimensional culture system (2D-culture) hardly mimics the growth and functions of LCSCs in vivo and therefore significantly decreases the stemness activity of LCSCs. In this study, we constructed a special BME-based three-dimensional culture system (3D-culture) to amplify LCSCs in human lung adenocarcinoma cell line A549 cells and found 3D-culture promoted the enrichment and amplification of LCSCs in A549 cells displaying higher proliferation potential and invasion activity, but lower apoptosis. The expression and secretion levels of FGF1 and IGF1 were dramatically elevated in 3D-culture compared to 2D-culture. After growing in FGF1 and IGF1-conditioned 3D-culture, the proportion of LCSCs with specific stemness phenotypes in A549 cells significantly increased compared to that in conventional 3D suspension culture system. Further results indicated that FGF1 and IGF1 promoted the amplification and cancer stemness of LCSCs dependent on MAPK signaling pathway. Our data firstly established a growth factors-conditioned 3D-culture for LCSCs and demonstrated the effects of FGF1 and IGF1 in promoting the enrichment and amplification of LCSCs which might provide a feasible cell model in vitro for both mechanism study and translational research on lung cancer. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. 3D gaze tracking system for NVidia 3D Vision®.

    Science.gov (United States)

    Wibirama, Sunu; Hamamoto, Kazuhiko

    2013-01-01

    Inappropriate parallax setting in stereoscopic content generally causes visual fatigue and visual discomfort. To optimize three dimensional (3D) effects in stereoscopic content by taking into account health issue, understanding how user gazes at 3D direction in virtual space is currently an important research topic. In this paper, we report the study of developing a novel 3D gaze tracking system for Nvidia 3D Vision(®) to be used in desktop stereoscopic display. We suggest an optimized geometric method to accurately measure the position of virtual 3D object. Our experimental result shows that the proposed system achieved better accuracy compared to conventional geometric method by average errors 0.83 cm, 0.87 cm, and 1.06 cm in X, Y, and Z dimensions, respectively.

  19. Coupled 3D neutronics/thermal hydraulics modeling of the SAFARI-1 MTR

    International Nuclear Information System (INIS)

    Rosenkrantz, Adam; Avramova, Maria; Ivanov, Kostadin; Prinsloo, Rian; Botes, Danniëll; Elsakhawy, Khalid

    2014-01-01

    Highlights: • Development of 3D coupled neutronics/thermal–hydraulic model of SAFARI-1. • Verification of 3D steady-state NEM based neutronics model for SAFARI-1. • Verification of 3D COBRA-TF based thermal–hydraulic model of SAFARI-1. • Quantification of the effect of correct modeling of thermal–hydraulic feedback. - Abstract: The purpose of this study was to develop a coupled accurate multi-physics model of the SAFARI-1 Material Testing Reactor (MTR), a facility that is used for both research and the production of medical isotopes. The model was developed as part of the SAFARI-1 benchmarking project as a cooperative effort between the Pennsylvania State University (PSU) and the South African Nuclear Energy Corporation (Necsa). It was created using a multi-physics coupling of state of the art nuclear reactor simulation tools, consisting of a neutronics code and a thermal hydraulics code. The neutronics tool used was the PSU code NEM, and the results from this component were verified using the Necsa neutronics code OSCAR-4, which is utilized for SAFARI-1 core design and fuel management. On average, the multiplication factors of the neutronics models agreed to within 5 pcm and the radial assembly-averaged powers agreed to within 0.2%. The thermal hydraulics tool used was the PSU version of COBRA-TF (CTF) sub-channel code, and the results of this component were verified against another thermal hydraulics code, the RELAP5-3D system code, used at Necsa for thermal–hydraulics analysis of SAFARI-1. Although only assembly-averaged results from RELAP5-3D were available, they fell within the range of values for the corresponding assemblies in the comprehensive CTF solution. This comparison allows for the first time to perform a quantification of steady-state errors for a low-powered MTR with an advanced thermal–hydraulic code such as CTF on a per-channel basis as compared to simpler and coarser-mesh RELAP5-3D modeling. Additionally, a new cross section

  20. Acute D2/D3 dopaminergic agonism but chronic D2/D3 antagonism prevents NMDA antagonist neurotoxicity.

    Science.gov (United States)

    Farber, Nuri B; Nemmers, Brian; Noguchi, Kevin K

    2006-09-15

    Antagonists of the N-methyl-D-aspartate (NMDA) glutamate receptor, most likely by producing disinhibtion in complex circuits, acutely produce psychosis and cognitive disturbances in humans, and neurotoxicity in rodents. Studies examining NMDA Receptor Hypofunction (NRHypo) neurotoxicity in animals, therefore, may provide insights into the pathophysiology of psychotic disorders. Dopaminergic D2 and/or D3 agents can modify psychosis over days to weeks, suggesting involvement of these transmitter system(s). We studied the ability of D2/D3 agonists and antagonists to modify NRHypo neurotoxicity both after a one-time acute exposure and after chronic daily exposure. Here we report that D2/D3 dopamine agonists, probably via D3 receptors, prevent NRHypo neurotoxicity when given acutely. The protective effect with D2/D3 agonists is not seen after chronic daily dosing. In contrast, the antipsychotic haloperidol does not affect NRHypo neurotoxicity when given acutely at D2/D3 doses. However, after chronic daily dosing of 1, 3, or 5 weeks, haloperidol does prevent NRHypo neurotoxicity with longer durations producing greater protection. Understanding the changes that occur in the NRHypo circuit after chronic exposure to dopaminergic agents could provide important clues into the pathophysiology of psychotic disorders.

  1. Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder

    Directory of Open Access Journals (Sweden)

    Chien-Hsun Wang

    2016-12-01

    Full Text Available This study aims to determine the effects of appropriate experimental parameters on the thermophysical properties of molten micro droplets, Sn-3Ag-0.5Cu solder balls with an average droplet diameter of 50 μm were prepared. The inkjet printing parameters of the molten micro droplets, such as the dot spacing, stage velocity and sample temperature, were optimized in the 1D and 2D printing of metallic microstructures. The impact and mergence of molten micro droplets were observed with a high-speed digital camera. The line width of each sample was then calculated using a formula over a temperature range of 30 to 70 °C. The results showed that a metallic line with a width of 55 μm can be successfully printed with dot spacing (50 μm and the stage velocity (50 mm∙s−1 at the substrate temperature of 30 °C. The experimental results revealed that the height (from 0.63 to 0.58 and solidification contact angle (from 72° to 56° of the metallic micro droplets decreased as the temperature of the sample increased from 30 to 70 °C. High-speed digital camera (HSDC observations showed that the quality of the 3D micro patterns improved significantly when the droplets were deposited at 70 °C.

  2. 2D VS 3D imaging of brain tumours with 18F-Fluoromisonidazole (FMISO) and positron emission tomography (PET)

    International Nuclear Information System (INIS)

    Pathmaraj, K.; Scott, A.M.; Egan, G.F.; Hannah, A.; Tauro, A.; Tochon-Danguy, A.; Sachinidis, J.; Berlangieri, S.U.; Fabinyi, G.; McKay, W.J.; Cher, L.

    1998-01-01

    Full text: 18 F-FMISO accumulates in hypoxic cells and can be used in the PET imaging of brain tumours containing viable but hypoxic cells. The limited activity (typically 130 MBq) of injected 18 F-FMISO yield poor statistics, requiring prolonged imaging in the conventional 2D mode of PET scanning. 3D (septa retracted) imaging allows for more counts to be collected over a shorter time period making it a more practical alternative. This study investigates the contrast resolution that can be obtained from 3D PET scans compared to the corresponding 2D scan. A patient recently diagnosed with brain tumour was injected with 18 -FMISO 2 hours prior to scanning and imaged supine on a 951/31R PET scanner with the head secured firmly in a head holder. The imaging protocol consisted of a 3 min emission rectilinear scan to position the brain in the FOV, a 10 min post-emission transmission scan, a 20 min 2D emission scan and a 5X10 min frames 3D emission scan. Both the 2D and 3D scans were reconstructed with filtered backprojection algorithm. The first 10 min frame of the 3D acquisition was reconstructed. The total true counts were 3 million and 6.06 million in the 2D image and 3D images respectively. The random events were 0.24 million and 0.96 million in the 2D and 3D images respectively. The Noise Equivalent Counts (NEC) were 2.2 million and 2.02 million for the 2D and 3D images respectively indicating that the 2D and 3D scans (in spite of the nominal true events being vastly different in the 2 scans) had similar Signal to Noise Ratio (SNR). Circular ROI's were defined in the tumour and the contralateral cortex in comparable transaxial slices of the 2D and 3D images. Contrast resolution of the tumour to the background was calculated as 1.4 and 1.38 in the 2D and 3D images respectively. Thus comparable contrast resolution is obtained in the brain with both 3D and 2D images, making 3D imaging a viable alternative to 2D imaging and greatly reducing imaging time. Optimum time

  3. E3D, 3-D Elastic Seismic Wave Propagation Code

    International Nuclear Information System (INIS)

    Larsen, S.; Harris, D.; Schultz, C.; Maddix, D.; Bakowsky, T.; Bent, L.

    2004-01-01

    1 - Description of program or function: E3D is capable of simulating seismic wave propagation in a 3D heterogeneous earth. Seismic waves are initiated by earthquake, explosive, and/or other sources. These waves propagate through a 3D geologic model, and are simulated as synthetic seismograms or other graphical output. 2 - Methods: The software simulates wave propagation by solving the elasto-dynamic formulation of the full wave equation on a staggered grid. The solution scheme is 4-order accurate in space, 2-order accurate in time

  4. Activated sludge models ASM1, ASM2, ASM2d and ASM3

    DEFF Research Database (Denmark)

    Henze, Mogens; Gujer, W.; Mino, T.

    This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time.Modelling of activated...... sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research.ContentsASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes...... in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2...

  5. [Changes in the monoamine content in different parts of hypothalamus depending on the stages of the estrous cycle].

    Science.gov (United States)

    Babichev, V N; Adamskaia, E I

    1976-01-01

    Fluorimetric determination of monoamines in various regions of the hypothalamus and at different stages of the estral cycle in rats showed that the serotonin, noradrenaline, and particularly dophamine content changed both in the course of the cycle and at different time (10, 15 and 18 hours) of the same stage of the cycle. Dophamine concentration in the arcuate area--the centre of the tonic activity--reached its maximum at 18 hours of the diestrus-2 (D2) and fell to the minimum at 10 hours of the proestrus (P). Noradrenaline level in the preoptic area increased at 18 hours of the D2 and fell at 10 hours of the P. It is supposed that in the hypothalamic regulation of the estral cycle at least two monoamines (dopamine and noradrenaline) took part; the trigger role belongs to noradrenaline of the preoptic area (the cyclic centre).

  6. ARP1400 DVI break analysis using the MARS 3.1 multi-D component

    International Nuclear Information System (INIS)

    Hwang, Moon-Kyu; Lim, Hong-Sik; Lee, Seung-Wook; Bae, Sung-Won; Chung, Bub-Dong

    2006-01-01

    The current version of MARS 3.1 has a multi-D component intended to simulate an asymmetric multidimensional fluid behavior in a reactor core, downcomer or in a steam generator, in a more realistic manner. The feature is implemented in the 1-D module of the code. As opposed to the cross flow junction modeling, the multi-D component allows for a lateral momentum transfer as well as a sheer stress. Thus, a full three-Dimensional analysis capability is available as in the case of RELAP5-3D or CATHARE. In this study the multi-D component is applied to the hypothetical accident of a DVI (Direct Vessel Injection) break in the APR1400 plant, and the results are analyzed

  7. Levels of 25(OHD3, IL-2, and C-peptide in Children with Type 1 Diabetes Mellitus (T1DM Receiving Vitamin D3 Supplementation

    Directory of Open Access Journals (Sweden)

    Tjahyo Suryanto

    2018-01-01

    Full Text Available Type 1 Diabetes Mellitus (T1DM has become a health problem in many countries. T1DM is the consequence of autoimmune destruction process of β cells. There was relationship between vitamin D deficiency with T1DM. The destruction process was caused by an imbalance of pro-inflammatory and anti-inflammatory cytokines. One of the pro-inflammatory cytokines is IL-2. C-peptide examination to see the function of beta cells due to destruction of pancreatic beta cell. Administration of vitamin D3 supplementation still cause controversy and give varying results. This randomized clinical trial was conducted to determine the levels of 25(OHD3, IL-2, and C-peptide in people with T1DM who received vitamin D3 supplementation. The subjects were 26 children with T1DM, divided into K1 group (received vitamin D3 supplementation and K2 group (received placebo. The results showed higher levels of 25(OHD3 in the K1 group and statistically found a significant difference (p = 0.00. Higher levels of IL-2 and lower C-peptide were obtained in the K1 group and no statistically significant differences were found (p = 0.76 and p= 0.26. The insignificant relationship and the negative correlation were found between 25(OHD3 and IL-2 (p = 0.71; r = - 0.12, 25(OHD3 and C-peptide (p = 0.59; r = -0.16, also levels of IL-2 and C-peptide (p = 0.13; r = -0.44 in children with type 1 diabetes who received vitamin D3 supplementation. From this study can be concluded that administration vitamin D3 supplementation in patients with T1DM can increase levels 25(OHD3 significantly. This increase has not significantly lowered levels of IL-2 and increased levels of C-peptide. However, there was an absolute decrease in the rate of slower C-peptide in the supplemented group than in the placebo group.

  8. 3D gauged supergravity from SU(2) reduction of $N=1$ 6D supergravity

    CERN Document Server

    Gava, Edi; Narain, K S

    2010-01-01

    We obtain Yang-Mills $SU(2)\\times G$ gauged supergravity in three dimensions from $SU(2)$ group manifold reduction of (1,0) six dimensional supergravity coupled to an anti-symmetric tensor multiplet and gauge vector multiplets in the adjoint of $G$. The reduced theory is consistently truncated to $N=4$ 3D supergravity coupled to $4(1+\\textrm{dim}\\, G)$ bosonic and $4(1+\\textrm{dim}\\, G)$ fermionic propagating degrees of freedom. This is in contrast to the reduction in which there are also massive vector fields. The scalar manifold is $\\mathbf{R}\\times \\frac{SO(3,\\, \\textrm{dim}\\, G)}{SO(3)\\times SO(\\textrm{dim}\\, G)}$, and there is a $SU(2)\\times G$ gauge group. We then construct $N=4$ Chern-Simons $(SO(3)\\ltimes \\mathbf{R}^3)\\times (G\\ltimes \\mathbf{R}^{\\textrm{dim}G})$ three dimensional gauged supergravity with scalar manifold $\\frac{SO(4,\\,1+\\textrm{dim}G)}{SO(4)\\times SO(1+\\textrm{dim}G)}$ and explicitly show that this theory is on-shell equivalent to the Yang-Mills $SO(3)\\times G$ gauged supergravity the...

  9. Estimation of gadolinium-induced T1-shortening with measurement of simple signal intensity ratio between the cochlea and brain parenchyma on 3D-FLAIR. Correlation with T1 measurement by TI scout sequence

    International Nuclear Information System (INIS)

    Naganawa, Shinji; Ishihara, Shunichi; Iwano, Shingo; Kawai, Hisashi; Sone, Michihiko; Nakashima, Tsutomu

    2010-01-01

    The purpose of this study was to T 1 -shortening of labyrinthine fluid on 3-dimensional fluid-attenuated inversion recovery (3D-FLAIR) has been reported in many inner ear disorders. Although semi-quantitative assessment by simple signal intensity ratio between cochlear fluid and brain tissue has been tried, its feasibility using a multi-channel phased-array head coil with an inherently inhomogenous sensitivity distribution has not been fully evaluated. We evaluated the feasibility of measuring simple signal intensity ratio by correlating rapid T 1 measurements using an inversion time (TI) scout sequence. We evaluated 10 patients with Meniere's disease and 4 patients with sudden deafness. Nine of the patients with Meniere's disease received a unilateral intratympanic injection of gadolinium-diethylenetriamine pentaacetic acid (Gd-DTPA); the tenth patient received bilateral injections. The 4 patients with sudden deafness received a double-dose intravenous injection. Magnetic resonance (MR) images were obtained 24 hours after intratympanic injections and 4 hours after intravenous injections at 3 tesla using a 32-channel head coil. We measured the ratio (CM ratio) between the signal intensity of the perilymph in the cochlea (C) and that of the medulla oblongata (M) and correlated it with the null-point inversion time (TI null ) obtained with the TI scout sequence. The TI scout consisted of 85 images obtained with TI values between 132.5 and 3087.5 ms at increments of 37.5 ms. The correlation coefficient between TI null and the natural logarithm of the CM ratio was -0.88 (P<0.01). There was significant negative linear correlation. Measurement of the simple signal intensity ratio between the cochlea and the medulla can be used for semi-quantitative analysis of 3D-FLAIR. The results of this study may facilitate clinical research of inner-ear disease using 3D-FLAIR. (author)

  10. D-Tagatose, a stereoisomer of D-fructose, increases hydrogen production in humans without affecting 24-hour energy expenditure or respiratory exchange ratio.

    Science.gov (United States)

    Buemann, B; Toubro, S; Astrup, A

    1998-09-01

    In growth studies on rats, the ketohexose D-tagatose has been shown to contribute no net metabolizable energy, and a pronounced thermic effect of the sugar has been suggested to account for the absence of energy. In a double-blind and balanced cross-over design, we measured 24-h energy expenditure in eight normal weight humans in a respiration chamber during the consumption of 30 g D-tagatose or 30 g sucrose/d. Metabolic measurements were performed before and after a 2-wk adaptation period with a 30-g daily intake of the test sugar. Total 24-h energy expenditure and hour-by-hour profile were unaffected by the test sugar. The nonprotein respiratory exchange ratio (RERnp) was similar during consumption of D-tagatose and sucrose. However, the effect on RERnp due to CO2 produced by fermentation of D-tagatose could not be quantified in this study. A significant increase in 24-h H2 production (35%) during D-tagatose administration suggests a substantial malabsorption of the sugar. We found no effects of the 2-wk adaptation period on the measured gas exchange variables. Significantly lower fasting plasma insulin and triglyceride concentrations were observed during D-tagatose administration compared with the sucrose period. No effects of D-tagatose on body weight and composition were seen, but the perception of fullness 2.5 h after the sugar load was greater with D-tagatose. In conclusion, this study does not suggest a pronounced thermic effect of D-tagatose, and other mechanisms seem to be required to explain its lack of net energy.

  11. Two-stage sintering of Al2O3 with polysiloxane

    International Nuclear Information System (INIS)

    Godoy, A.L.E.; Bressiani, A.H.A.

    2014-01-01

    The final stage of sintering involves grain growth which often is not desirable in the microstructure of structural ceramics and cutting tools. The ceramics derived from inorganic polymers allow the production of thermo mechanical materials due to their hardness and especially their excellent structural stability under aggressive environment. The aim of this study is to investigate the effect of two steps sintering process on density, microstructure and hardness of ceramics derived from the mixture alumina-polysiloxane (PMS). Alumina was ball-milled for 12, 24 and 48 hours. The alumina powder mean particle size was characterized by laser diffraction. It was added 10% wt of PMS. Pellets were prepared by die pressing and sintering at 1650°C/10min and 1550°C/1h. The sintered materials were characterized by evaluation of apparent density by helium picnometry, X-ray diffraction, scanning electron microscopy and Vickers indentation analysis for hardness determination. The specimens are composed by mullite and the best results were obtained with the addition of alumina milled for 48 hours. (author)

  12. [Non-biological 3D printed simulator for training in percutaneous nephro- lithotripsy].

    Science.gov (United States)

    Alyaev, Yu G; Sirota, E S; Bezrukov, E A; Ali, S Kh; Bukatov, M D; Letunovskiy, A V; Byadretdinov, I Sh

    2018-03-01

    To develop a non-biological 3D printed simulator for training and preoperative planning in percutaneous nephrolithotripsy (PCNL), which allows doctors to master and perform all stages of the operation under ultrasound and fluoroscopy guidance. The 3D model was constructed using multislice spiral computed tomography (MSCT) images of a patient with staghorn urolithiasis. The MSCT data were processed and used to print the model. The simulator consisted of two parts: a non-biological 3D printed soft model of a kidney with reproduced intra-renal vascular and collecting systems and a printed 3D model of a human body. Using this 3D printed simulator, PCNL was performed in the interventional radiology operating room under ultrasound and fluoroscopy guidance. The designed 3D printed model of the kidney completely reproduces the individual features of the intra-renal structures of the particular patient. During the training, all the main stages of PCNL were performed successfully: the puncture, dilation of the nephrostomy tract, endoscopic examination, intra-renal lithotripsy. Our proprietary 3D-printed simulator is a promising development in the field of endourologic training and preoperative planning in the treatment of complicated forms of urolithiasis.

  13. 2D-3D rigid registration to compensate for prostate motion during 3D TRUS-guided biopsy.

    Science.gov (United States)

    De Silva, Tharindu; Fenster, Aaron; Cool, Derek W; Gardi, Lori; Romagnoli, Cesare; Samarabandu, Jagath; Ward, Aaron D

    2013-02-01

    registration speed. They also studied the correlation between NCC and TREs. The root-mean-square (RMS) TRE of registrations performed prior to biopsy gun firing was found to be 1.87 ± 0.81 mm. This was an improvement over 4.75 ± 2.62 mm before registration. When the registrations were performed every second during the biopsy, the RMS TRE was reduced to 1.63 ± 0.51 mm. For 3D data sets acquired under different probe pressures, the RMS TRE was found to be 3.18 ± 1.6 mm. This was an improvement from 6.89 ± 4.1 mm before registration. With the GPU based implementation, the registrations were performed with a mean time of 1.1 s. The TRE showed a weak correlation with the similarity metric. However, the authors measured a generally convex shape of the metric around the ground truth, which may explain the rapid convergence of their algorithm to accurate results. Registration to compensate for prostate motion during 3D TRUS-guided biopsy can be performed with a measured accuracy of less than 2 mm and a speed of 1.1 s, which is an important step toward improving the targeting accuracy of a 3D TRUS-guided biopsy system.

  14. MR imaging of cranial nerve lesions using six different high-resolution T1- and T2(*)-weighted 3D and 2D sequences

    Energy Technology Data Exchange (ETDEWEB)

    Seitz, J.; Held, P.; Strotzer, M.; Voelk, M.; Nitz, W.R.; Dorenbeck, U.; Feuerbach, S. [Univ. Hospital of Regensburg (Germany). Dept. of Diagnostic Radiology; Stamato, S. [Univ. of California, San Diego, CA (United States). Dept. of Radiology

    2002-07-01

    Purpose: To find a suitable high-resolution MR protocol for the visualization of lesions of all 12 cranial nerves. Material and Methods: Thirty-eight pathologically changed cranial nerves (17 patients) were studied with MR imaging at 1.5T using 3D T2*-weighted CISS, T1-weighted 3D MP-RAGE (without and with i.v. contrast medium), T2-weighted 3D TSE, T2-weighted 2D TSE and T1-weighted fat saturation 2D TSE sequences. Visibility of the 38 lesions of the 12 cranial nerves in each sequence was evaluated by consensus of two radiologists using an evaluation scale from 1 (excellently visible) to 4 (not visible). Results: The 3D CISS sequence provided the best resolution of the cranial nerves and their lesions when surrounded by CSF. In nerves which were not surrounded by CSF, the 2D T1-weighted contrast-enhanced fat suppression technique was the best sequence. Conclusions: A combination of 3D CISS, the 2D T1-weighted fat suppressed sequence and a 3D contrast-enhanced MP-RAGE proved to be the most useful sequence to visualize all lesions of the cranial nerves. For the determination of enhancement, an additional 3D MP-RAGE sequence without contrast medium is required. This sequence is also very sensitive for the detection of hemorrhage.

  15. MR imaging of cranial nerve lesions using six different high-resolution T1- and T2(*)-weighted 3D and 2D sequences

    International Nuclear Information System (INIS)

    Seitz, J.; Held, P.; Strotzer, M.; Voelk, M.; Nitz, W.R.; Dorenbeck, U.; Feuerbach, S.; Stamato, S.

    2002-01-01

    Purpose: To find a suitable high-resolution MR protocol for the visualization of lesions of all 12 cranial nerves. Material and Methods: Thirty-eight pathologically changed cranial nerves (17 patients) were studied with MR imaging at 1.5T using 3D T2*-weighted CISS, T1-weighted 3D MP-RAGE (without and with i.v. contrast medium), T2-weighted 3D TSE, T2-weighted 2D TSE and T1-weighted fat saturation 2D TSE sequences. Visibility of the 38 lesions of the 12 cranial nerves in each sequence was evaluated by consensus of two radiologists using an evaluation scale from 1 (excellently visible) to 4 (not visible). Results: The 3D CISS sequence provided the best resolution of the cranial nerves and their lesions when surrounded by CSF. In nerves which were not surrounded by CSF, the 2D T1-weighted contrast-enhanced fat suppression technique was the best sequence. Conclusions: A combination of 3D CISS, the 2D T1-weighted fat suppressed sequence and a 3D contrast-enhanced MP-RAGE proved to be the most useful sequence to visualize all lesions of the cranial nerves. For the determination of enhancement, an additional 3D MP-RAGE sequence without contrast medium is required. This sequence is also very sensitive for the detection of hemorrhage

  16. 3D High Resolution l1-SPIRiT Reconstruction on Gadgetron based Cloud

    DEFF Research Database (Denmark)

    Xue, Hui; Kelmann, Peter; Inati, Souheil

    framework to support distributed computing in a cloud environment. This extension is named GT-Plus. A cloud version of 3D l1-SPIRiT was implemented on the GT-Plus framework. We demonstrate that a 3mins reconstruction could be achieved for 1mm3 isotropic resolution neuro scans with significantly improved......Applying non-linear reconstruction to high resolution 3D MRI is challenging because of the lengthy computing time needed for those iterative algorithms. To achieve practical processing duration to enable clinical usage of non-linear reconstruction, we have extended previously published Gadgetron...

  17. Enhancement MRI evaluation of neuroblastoma staging in children

    International Nuclear Information System (INIS)

    Li Xin; Wang Chunxiang; Zhao Bin; Liu Peifang

    2002-01-01

    Objective: To evaluate the value and limitation of Gd-DTPA enhanced MRI for neuroblastoma staging in children. Methods: Twelve cases of neuroblastoma proved by operation or bone marrow aspiration were examined by gadolinium-enhanced MRI. The age ranged from seven months to five years, mean 3.7 years. Eight tumors originated from adrenal, and four from posterior mediastinum. Conventional sequences, double dose gadolinium-enhanced MRI, and 3D CEMRA were used in all patients. Six cases were examined by CT in same time. Imaging staging on surgic-histopathological-based International Neuroblastoma Staging System (INSS) was performed. Results: Six patients were staged by CT, including stage I-II in 2 cases, stage III in 4 cases, and stage IV in none. Twelve patients were staged by conventional MRI, including stage I-II in 2 cases, stage III in 9 cases, and stage IV in 1 case. Twelve patients were staged by double dose gadolinium-enhanced MRI, including stage I-II in 1 case, stage III in 1 case, and stage IV in 10 cases. Conclusion: Gadolinium-enhanced MRI was a single best imaging modality for neuroblastoma, most useful for distal to diaphragm metastasis, dumbbell tumor intraspinal extension, and bone marrow metastasis that was not detected by aspirate examination. Enhancement MRI was important in evaluating the therapy and was also helpful in assessing the therapeutic efficacy and relapse. 3D CEMRA helps demonstrate large vascular encasement and tumor erosion into important organs, and it is useful in assessing the respectability. Long examination time and lack in showing the characteristic calcium were the limitations

  18. Microbiological Characteristic and Nutrition Quality of Goat Milk Kefir Based on Vitamin D3 Fortification Time

    Science.gov (United States)

    Fauziyyah, F.; Panunggal, B.; Afifah, D. N.; Rustanti, N.; Anjani, G.

    2018-02-01

    Goat milk kefir fortified with vitamin D3 is expected to benefit individual with insulin resistance. Different vitamin D3 fortification time allegedly effect microbiological characteristic and nutrition quality of goat milk kefir due to its microbial growth curve, thus this study aimed to analyze those parameters. This study was an experimental research. This study contains five treatments (vitamin D3 fortification at 0, 6, 12, 18, or 24 hours of fermentation) and a group of control. Total lactic acid bacteria, vitamin D3, protein level, fat contain, crude fiber, viscosity, and pH was analyzed by Total Plate Count, spectrophotometry, Bradford method, Babcock method, gravimetric analysis, Ostwald method, and pH meter respectively. Time of vitamin D3 fortification significantly effect vitamin D3 content (p=0,021), fat content (p=0,001), crude fiber (p=0,0001), viscosity (p=0,010), and total lactic acid bacteria (p=0,048). The highest vitamin D3 content was found on the group fortified at 6 hours of fermentation. All treatment groups has lower fat content and crude fiber content than control group. Total LAB in all group meet the Codex standard (≥ 107 CFU/ml). Control group and fortification group at 24 hours of fermentation have higher viscosity than other groups. There was no significant difference found in goat milk kefir protein level (p=0,262) and pH (p=0,056) despite the difference of fortification time. Vitamin D3 fortification time effect vitamin D3 content, fat content, crude fiber, viscosity, and total lactic acid bacteria of goat milk kefir, but did not effect protein content and pH of goat milk kefir.

  19. Chitosan porous 3D scaffolds embedded with resolvin D1 to improve in vivo bone healing.

    Science.gov (United States)

    Vasconcelos, Daniela P; Costa, Madalena; Neves, Nuno; Teixeira, José H; Vasconcelos, Daniel M; Santos, Susana G; Águas, Artur P; Barbosa, Mário A; Barbosa, Judite N

    2018-06-01

    The aim of this study was to investigate the effect chitosan (Ch) porous 3D scaffolds embedded with resolvin D1 (RvD1), an endogenous pro-resolving lipid mediator, on bone tissue healing. These scaffolds previous developed by us have demonstrated to have immunomodulatory properties namely in the modulation of the macrophage inflammatory phenotypic profile in an in vivo model of inflammation. Herein, results obtained in an in vivo rat femoral defect model demonstrated that two months after Ch + RvD1 scaffolds implantation, an increase in new bone formation, in bone trabecular thickness, and in collagen type I and Coll I/Coll III ratio were observed. These results suggest that Ch scaffolds embedded with RvD1 were able to lead to the formation of new bone with improvement of trabecular thickness. This study shows that the presence of RvD1 in the acute phase of the inflammatory response to the implanted biomaterial had a positive role in the subsequent bone tissue repair, thus demonstrating the importance of innovative approaches for the control of immune responses to biomedical implants in the design of advanced strategies for regenerative medicine. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1626-1633, 2018. © 2018 Wiley Periodicals, Inc.

  20. PPARγ agonist pioglitazone improves cerebellar dysfunction at pre-Aβ deposition stage in APPswe/PS1dE9 Alzheimer's disease model mice

    International Nuclear Information System (INIS)

    Toba, Junya; Nikkuni, Miyu; Ishizeki, Masato; Yoshii, Aya; Watamura, Naoto; Inoue, Takafumi; Ohshima, Toshio

    2016-01-01

    Alzheimer's disease (AD) is one of the best known neurodegenerative diseases; it causes dementia and its pathological features include accumulation of amyloid β (Aβ) and neurofibrillary tangles (NFTs) in the brain. Elevated Cdk5 activity and CRMP2 phosphorylation have been reported in the brains of AD model mice at the early stage of the disease, but the significance thereof in human AD remains unelucidated. We have recently reported that Aβ accumulation in the cerebellum of AD model APPswe/PS1dE9 (APP/PS1) mice, and cerebellar dysfunctions, such as impairment of motor coordination ability and long-term depression (LTD) induction, at the pre-Aβ accumulation stage. In the present study, we found increased phosphorylation levels of CRMP2 as well as increased p35 protein levels in the cerebellum of APP/PS1 mice. Interestingly, we show that pioglitazone, an agonist of peroxisome proliferator-activated receptor γ, normalized the p35 protein and CRMP2 phosphorylation levels in the cerebellum. Impaired motor coordination ability and LTD in APP/PS1 mice were ameliorated by pioglitazone treatment at the pre-Aβ accumulation stage. These results suggest a correlation between CRMP2 phosphorylation and AD pathophysiology, and indicate the effectiveness of pioglitazone treatment at the pre-Aβ accumulation stage in AD model mice. -- Highlights: •Phosphorylation level of CRMP2 increased in the cerebellum of APP/PS1 mice. •p35 protein levels increased in the cerebellum of APP/PS1 mice. •Pioglitazone treatment improved cerebellar dysfunction of APP/PS1 mice.

  1. Adverse obstetric outcomes in women with previous cesarean for dystocia in second stage of labor.

    Science.gov (United States)

    Jastrow, Nicole; Demers, Suzanne; Gauthier, Robert J; Chaillet, Nils; Brassard, Normand; Bujold, Emmanuel

    2013-03-01

    To evaluate obstetric outcomes in women undergoing a trial of labor (TOL) after a previous cesarean for dystocia in second stage of labor. A retrospective cohort study of women with one previous low transverse cesarean undergoing a first TOL was performed. Women with previous cesarean for dystocia in first stage and those with previous dystocia in second stage were compared with those with previous cesarean for nonrecurrent reasons (controls). Multivariable regressions analyses were performed. Of 1655 women, those with previous dystocia in second stage of labor (n = 204) had greater risks than controls (n = 880) to have an operative delivery [odds ratio (OR): 1.5; 95% confidence intervals (CI) 1.1 to 2.2], shoulder dystocia (OR: 2.9; 95% CI 1.1 to 8.0), and uterine rupture in the second stage of labor (OR: 4.9; 95% CI 1.1 to 23), and especially in case of fetal macrosomia (OR: 29.6; 95% CI 4.4 to 202). The median second stage of labor duration before uterine rupture was 2.5 hours (interquartile range: 1.5 to 3.2 hours) in these women. Previous cesarean for dystocia in the second stage of labor is associated with second-stage uterine rupture at next delivery, especially in cases of suspected fetal macrosomia and prolonged second stage of labor. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  2. Aspects of defects in 3d-3d correspondence

    International Nuclear Information System (INIS)

    Gang, Dongmin; Kim, Nakwoo; Romo, Mauricio; Yamazaki, Masahito

    2016-01-01

    In this paper we study supersymmetric co-dimension 2 and 4 defects in the compactification of the 6d (2,0) theory of type A_N_−_1 on a 3-manifold M. The so-called 3d-3d correspondence is a relation between complexified Chern-Simons theory (with gauge group SL(N,ℂ)) on M and a 3d N=2 theory T_N[M]. We study this correspondence in the presence of supersymmetric defects, which are knots/links inside the 3-manifold. Our study employs a number of different methods: state-integral models for complex Chern-Simons theory, cluster algebra techniques, domain wall theory T[SU(N)], 5d N=2 SYM, and also supergravity analysis through holography. These methods are complementary and we find agreement between them. In some cases the results lead to highly non-trivial predictions on the partition function. Our discussion includes a general expression for the cluster partition function, which can be used to compute in the presence of maximal and certain class of non-maximal punctures when N>2. We also highlight the non-Abelian description of the 3d N=2T_N[M] theory with defect included, when such a description is available. This paper is a companion to our shorter paper http://dx.doi.org/10.1088/1751-8113/49/30/30LT02, which summarizes our main results.

  3. Super-Segments Based Classification of 3D Urban Street Scenes

    Directory of Open Access Journals (Sweden)

    Yu Zhou

    2012-12-01

    Full Text Available We address the problem of classifying 3D point clouds: given 3D urban street scenes gathered by a lidar sensor, we wish to assign a class label to every point. This work is a key step toward realizing applications in robots and cars, for example. In this paper, we present a novel approach to the classification of 3D urban scenes based on super-segments, which are generated from point clouds by two stages of segmentation: a clustering stage and a grouping stage. Then, six effective normal and dimension features that vary with object class are extracted at the super-segment level for training some general classifiers. We evaluate our method both quantitatively and qualitatively using the challenging Velodyne lidar data set. The results show that by only using normal and dimension features we can achieve better recognition than can be achieved with high-dimensional shape descriptors. We also evaluate the adopting of the MRF framework in our approach, but the experimental results indicate that thisbarely improved the accuracy of the classified results due to the sparse property of the super-segments.

  4. Implementation of virtual models from sheet metal forming simulation into physical 3D colour models using 3D printing

    Science.gov (United States)

    Junk, S.

    2016-08-01

    Today the methods of numerical simulation of sheet metal forming offer a great diversity of possibilities for optimization in product development and in process design. However, the results from simulation are only available as virtual models. Because there are any forming tools available during the early stages of product development, physical models that could serve to represent the virtual results are therefore lacking. Physical 3D-models can be created using 3D-printing and serve as an illustration and present a better understanding of the simulation results. In this way, the results from the simulation can be made more “comprehensible” within a development team. This paper presents the possibilities of 3D-colour printing with particular consideration of the requirements regarding the implementation of sheet metal forming simulation. Using concrete examples of sheet metal forming, the manufacturing of 3D colour models will be expounded upon on the basis of simulation results.

  5. Laser spectroscopy of the 4s4p(3) P-2-4s3d(1) D-2 transition on magnetically trapped calcium atoms

    NARCIS (Netherlands)

    Dammalapati, U.; Norris, I.; Burrows, C.; Riis, E.

    2011-01-01

    Laser excitation of the 4s4p(3) P-2-4s3d(1) D-2 transition in atomic calcium has been observed and the wavelength determined to 1530.5298(6) nm. The metastable 4s4p(3) P-2 atoms were magnetically trapped in the quadrupole magnetic field of a magneto-optical trap. This state represents the only

  6. Prevalence of secondary hyperparathyroidism in patients with stage 3 and 4 chronic kidney disease seen in internal medicine.

    Science.gov (United States)

    Bureo, Juan Carlos; Arévalo, Jose Carlos; Antón, Joaquín; Adrados, Gaspar; Jiménez Morales, Jose Luis; Robles, Nicolás Roberto

    2015-01-01

    Despite the high prevalence of chronic kidney disease in the elderly population, few data are available on the frequency of secondary hyperparathyroidism in the Spanish population affected by this problem. We undertook a study on this issue in patients attending the internal medicine departments in our area. An observational, cross-sectional survey performed at internal medicine departments on 415 patients with stage 3 and 4 chronic kidney disease. Clinical history and risk factors were collected using a standardized protocol. Serum creatinine, phosphate, calcium, intact parathormone (PTH) and 25-hydroxy-cholecalciferol (25-OH-vitD) levels were measured in all patients. Among stage 3 patients, 62.9% had PTH levels ≥70pg/mL and 32.7% levels ≥110pg/mL. Median PTH level in stage 4 patients was 120pg/mL (p <0.001), and 77.9% of these patients had PTH ≥70pg/mL (p <0.001) and 54.1% ≥110pg/mL (p=0.015). Adequate 25-hydroxy-cholecalciferol levels were found in only 7.2% of stage 3 patients and 4.1% of stage 4 patients. Only 7.2% of stage 3 patients had hyperphosphatemia, as compared to 25.4% of stage 4 patients (p <0.001). Hyperparathyroidism is a common complication of stage 3 and 4 chronic kidney disease which is not associated to detectable changes in serum calcium and phosphate levels. It is therefore advisable to measure PTH levels in all patients with decreased glomerular filtration rate. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

  7. 1D and 3D anthropometric data application on public transport vehicle layout and on oil and gas laboratories work environment design.

    Science.gov (United States)

    Pastura, F C H; Guimarães, C P; Zamberlan, M C P; Cid, G L; Santos, V S; Streit, P; Paranhos, A G; Cobbe, R T; Cobbe, K T; Batista, D S

    2012-01-01

    The goal of this paper is to present 1D and 3D anthropometric data applied to two distinct design situations: one related to the interior layout of a public transport vehicle and another one related to oil and gas laboratories work environment design. On this study, the 1D anthropometric data were extracted from the Brazilian anthropometric database developed by INT and the 3D anthropometric data were obtained using a Cyberware 3D whole body scanner. A second purpose of this paper is to present the 3D human scanning data as a tool that can help designers on decision making.

  8. Reducing bed rest time from five to three hours does not increase complications after cardiac catheterization: the THREE CATH Trial 1

    Science.gov (United States)

    Matte, Roselene; Hilário, Thamires de Souza; Reich, Rejane; Aliti, Graziella Badin; Rabelo-Silva, Eneida Rejane

    2016-01-01

    Abstract Objective: to compare the incidence of vascular complications in patients undergoing transfemoral cardiac catheterization with a 6F introducer sheath followed by 3-hour versus 5-hour rest. Methods: randomized clinical trial. Subjects in the intervention group (IG) ambulated 3 hours after sheath removal, versus 5 hours in the control group (CG). All patients remained in the catheterization laboratory for 5 hours and were assessed hourly, and were contacted 24, 48, and 72 h after hospital discharge. Results: the sample comprised 367 patients in the IG and 363 in the GC. During cath lab stay, hematoma was the most common complication in both groups, occurring in 12 (3%) IG and 13 (4%) CG subjects (P=0.87). Bleeding occurred in 4 (1%) IG and 6 (2%) CG subjects (P=0.51), and vasovagal reaction in 5 (1.4%) IG and 4 (1.1%) CG subjects (P=0.75). At 24-h, 48-h, and 72-h bruising was the most commonly reported complication in both groups. None of the comparisons revealed any significant between-group differences. Conclusion: the results of this trial show that reducing bed rest time to 3 hours after elective cardiac catheterization is safe and does not increase complications as compared with a 5-hour rest. ClinicalTrials.gov Identifier: NCT-01740856 PMID:27463113

  9. A comparative study of 1D and 3D hemodynamics in patient-specific hepatic portal vein networks

    Directory of Open Access Journals (Sweden)

    Jonášová A.

    2014-12-01

    Full Text Available The development of software for use in clinical practice is often associated with many requirements and restrictions set not only by the medical doctors, but also by the hospital’s budget. To meet the requirement of reliable software, which is able to provide results within a short time period and with minimal computational demand, a certain measure of modelling simplification is usually inevitable. In case of blood flow simulations carried out in large vascular networks such as the one created by the hepatic portal vein, simplifications are made by necessity. The most often employed simplification includes the approach in the form of dimensional reduction, when the 3D model of a large vascular network is substituted with its 1D counterpart. In this context, a question naturally arises, how this reduction can affect the simulation accuracy and its outcome. In this paper, we try to answer this question by performing a quantitative comparison of 3D and 1D flow models in two patient-specific hepatic portal vein networks. The numerical simulations are carried out under average flow conditions and with the application of the three-element Windkessel model, which is able to approximate the downstream flow resistance of real hepatic tissue. The obtained results show that, although the 1D model can never truly substitute the 3D model, its easy implementation, time-saving model preparation and almost no demands on computer technology dominate as advantages over obvious but moderate modelling errors arising from the performed dimensional reduction.

  10. The simulation methods based on 1D/3D collaborative computing for the vehicle integrated thermal management

    International Nuclear Information System (INIS)

    Lu, Pengyu; Gao, Qing; Wang, Yan

    2016-01-01

    Highlights: • A 1D/3D collaborative computing simulation method for vehicle thermal management. • Analyzing the influence of the thermodynamic systems and the engine compartment geometry on the vehicle performance. • Providing the basis for the matching energy consumptions of thermodynamic systems in the underhood. - Abstract: The vehicle integrated thermal management containing the engine cooling circuit, the air conditioning circuit, the turbocharged inter-cooled circuit, the engine lubrication circuit etc. is the important means of enhancing power performance, promoting economy, saving energy and reducing emission. In this study, a 1D/3D collaborative simulation method is proposed with the engine cooling circuit and air conditioning circuit being the research object. The mathematical characterizations of the multiple thermodynamic systems are achieved by 1D calculation and the underhood structure is described by 3D simulation. Through analyzing the engine compartment integrated heat transfer process, the model of the integrated thermal management system is formed after coupling the cooling circuit and air conditioning circuit. This collaborative simulation method establishes structured correlation of engine-cooling and air conditioning thermal dissipation in the engine compartment, comprehensively analyzing the engine working process and air condition operational process in order to research the interaction effect of them. In the calculation examples, to achieve the integrated optimization of multiple thermal systems design and performance prediction, by describing the influence of system thermomechanical parameters and operating duty to underhood heat transfer process, performance evaluation of the engine cooling circuit and the air conditioning circuit are realized.

  11. Involvement of 1,25D{sub 3}-MARRS (membrane associated, rapid response steroid-binding), a novel vitamin D receptor, in growth inhibition of breast cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Richard, Cynthia L. [Department of Human Health and Nutritional Sciences, University of Guelph, Guelph, Ontario, Canada N1G2W1 (Canada); Farach-Carson, Mary C.; Rohe, Ben [Department of Biological Sciences, University of Delaware, Newark, DE 19716 (United States); Nemere, Ilka [Department of Nutrition and Food Sciences, Center for Integrated BioSystems, Utah State University, Logan, UT 84322 8700 (United States); Meckling, Kelly A., E-mail: kmecklin@uoguelph.ca [Department of Human Health and Nutritional Sciences, University of Guelph, Guelph, Ontario, Canada N1G2W1 (Canada)

    2010-03-10

    In addition to classical roles in calcium homeostasis and bone development, 1,25 dihydroxyvitamin D{sub 3} [1,25(OH){sub 2}D{sub 3}] inhibits the growth of several cancer types, including breast cancer. Although cellular effects of 1,25(OH){sub 2}D{sub 3} traditionally have been attributed to activation of a nuclear vitamin D receptor (VDR), a novel receptor for 1,25(OH){sub 2}D{sub 3} called 1,25D{sub 3}-MARRS (membrane-associated, rapid response steroid-binding) protein was identified recently. The purpose of this study was to determine if the level of 1,25D{sub 3}-MARRS expression modulates 1,25(OH){sub 2}D{sub 3} activity in breast cancer cells. Relative levels of 1,25D{sub 3}-MARRS protein in MCF-7, MDA MB 231, and MCF-10A cells were estimated by real-time RT-PCR and Western blotting. To determine if 1,25D{sub 3}-MARRS receptor was involved in the growth inhibitory effects of 1,25(OH){sub 2}D{sub 3} in MCF-7 cells, a ribozyme construct designed to knock down 1,25D{sub 3}-MARRS mRNA was stably transfected into MCF-7 cells. MCF-7 clones in which 1,25D{sub 3}-MARRS receptor expression was reduced showed increased sensitivity to 1,25(OH){sub 2}D{sub 3} ( IC{sub 50} 56 {+-} 24 nM) compared to controls (319 {+-} 181 nM; P < 0.05). Reduction in 1,25D{sub 3}-MARRS receptor lengthened the doubling time in transfectants treated with 1,25(OH){sub 2}D{sub 3}. Knockdown of 1,25D{sub 3}-MARRS receptor also increased the sensitivity of MCF-7 cells to the vitamin D analogs KH1060 and MC903, but not to unrelated agents (all-trans retinoic acid, paclitaxel, serum/glucose starvation, or the isoflavone, pomiferin). These results suggest that 1,25D{sub 3}-MARRS receptor expression interferes with the growth inhibitory activity of 1,25(OH){sub 2}D{sub 3} in breast cancer cells, possibly through the nuclear VDR. Further research should examine the potential for pharmacological or natural agents that modify 1,25D{sub 3}-MARRS expression or activity as anticancer agents.

  12. Crystallographic and magnetic properties of (C6D11ND3)CuBr3 and (Zn1-xMnx)3As2

    International Nuclear Information System (INIS)

    Vries, G.C. de.

    1989-08-01

    The investigations described concern the crystallographic and magnetic properties of the quasi one-dimensional (1d) ferromagnetic system (C 6 D 11 ND 3 )CuBr 3 (or CHAB) and the II-V type diluted magnetic semiconductor (Zn 1 - x Mn x ) 3 As 2 (or ZMA). Both compounds have been studied with various neutron scattering techniques. The crystallographic properties of CHAB and ZMA have been investigated by neutron diffraction. These diffraction experiments were carried out at the High Flux Reactor (HFR) at Petten, Netherlands. For the investigation of the static and dynamic magnetic properties of CHAB neutron scattering experiments were performed in Petten as well as other European reactor institutes. These investigations comprise a study of the 3d long-rate order and the 1d correlations of the magnetic moments, and a study of the behaviour of the linear spin-wave excitations

  13. Studies on the hydroprocessing of deashed oil. 13. ; Characterization of the catalyst used for 7800 hours. De-ashed-oil no suisoka bunkai hanno ni kansuru kenkyu. 13. ; 7800 jikan shiyozumi shokubai no characterization

    Energy Technology Data Exchange (ETDEWEB)

    Kaneko, T. (Mitsubishi Kasei Corp., Tokyo (Japan)); Kimura, T. (Cosmo Research Institute, Tokyo (Japan)); Kageyama, Y. (Nippon Brown Coal Liquefaction Co. Ltd., Tokyo (Japan))

    1992-11-05

    It was intended to darify long-term performance of a secondary hydrogenation catalyst used for about one year in a 50t/d brown coal liquefaction pilot plant built in Australia. A catalyst used for about 3,400 hours in the pilot plant was used to perform a life test of 7,800 hours in total to investigate the catalyst deactivation behavior, ashed metal and carbonaceous material deposition behavior, and changes in catalyst properties. A catalyst is considered to deactivate mainly because of deposition of carbonaceous materials on the catalyst in the initial stage of reaction and accumulation of alkaline metals (Na and K). The catalyst activity is estimated to reduce to about half the initial activity in about 1,000 hours, but it was found that the activity reduces and the properties change very little thereafter. From the fact that changes in selectivity to reaction associated with reduced activity and in product properties are small, and so are in the apparent activation energy, it was made clear that Cu-Ni-Mo/Al2O3 catalyst can be used for about one year. 3 refs., 9 figs., 1 tab.

  14. Role of Nutritional Factors at the Early Life Stages in the Pathogenesis and Clinical Course of Type 1 Diabetes

    Directory of Open Access Journals (Sweden)

    Yukiko Kagohashi

    2015-01-01

    Full Text Available Nutrition has been suggested as an important environmental factor other than viruses and chemicals in the pathogenesis of type 1 diabetes (T1D. Whereas various maternal dietary nutritional elements have been suggested and examined in T1D of both humans and experimental animals, the results largely remain controversial. In a series of studies using T1D model nonobese diabetic (NOD mice, maternal dietary n-6/n-3 essential fatty acid ratio during pregnancy and lactation period, that is, early life stages of the offspring, has been shown to affect pathogenesis of insulitis and strongly prevent overt T1D of the offspring, which is consistent with its preventive effects on other allergic diseases.

  15. Co-targeting of Tiam1/Rac1 and Notch ameliorates chemoresistance against doxorubicin in a biomimetic 3D lymphoma model

    Science.gov (United States)

    Ikram, Muhammad; Lim, Yeseon; Baek, Sun-Yong; Jin, Songwan; Jeong, Young Hun; Kwak, Jong-Young; Yoon, Sik

    2018-01-01

    Lymphoma is a heterogeneous disease with a highly variable clinical course and prognosis. Improving the prognosis for patients with relapsed and treatment-resistant lymphoma remains challenging. Current in vitro drug testing models based on 2D cell culture lack natural tissue-like structural organization and result in disappointing clinical outcomes. The development of efficient drug testing models using 3D cell culture that more accurately reflects in vivo behaviors is vital. Our aim was to establish an in vitro 3D lymphoma model that can imitate the in vivo 3D lymphoma microenvironment. Using this model, we explored strategies to enhance chemosensitivity to doxorubicin, an important chemotherapeutic drug widely used for the treatment of hematological malignancies. Lymphoma cells grown in this model exhibited excellent biomimetic properties compared to conventional 2D culture including (1) enhanced chemotherapy resistance, (2) suppressed rate of apoptosis, (3) upregulated expression of drug resistance genes (MDR1, MRP1, BCRP and HIF-1α), (4) elevated levels of tumor aggressiveness factors including Notch (Notch-1, -2, -3, and -4) and its downstream molecules (Hes-1 and Hey-1), VEGF and MMPs (MMP-2 and MMP-9), and (5) enrichment of a lymphoma stem cell population. Tiam1, a potential biomarker of tumor progression, metastasis, and chemoresistance, was activated in our 3D lymphoma model. Remarkably, we identified two synergistic therapeutic oncotargets, Tiam1 and Notch, as a strategy to combat resistance against doxorubicin in EL4 T and A20 B lymphoma. Therefore, our data suggest that our 3D lymphoma model is a promising in vitro research platform for studying lymphoma biology and therapeutic approaches. PMID:29416753

  16. Patient outcomes of monotherapy with hypofractionated three-dimensional conformal radiation therapy for stage T2 or T3 non-small cell lung cancer: a retrospective study

    International Nuclear Information System (INIS)

    Sakaguchi, Masakuni; Maebayashi, Toshiya; Aizawa, Takuya; Ishibashi, Naoya; Fukushima, Shoko; Abe, Osamu; Saito, Tsutomu

    2016-01-01

    Hypofractionated three-dimensional conformal radiation therapy (3D-CRT) is a treatment option for patients with early-stage non-small cell lung cancer (NSCLC) who are medically unable to tolerate surgery and who are not amenable to treatment with stereotactic body radiotherapy. This study assessed the efficacy and safety of 3D-CRT as a monotherapy in patients with localized stage T2 or T3 NSCLC. This retrospective study consisted of 29 patients (20 males) aged 56–89 years (median, 76 years) with histologically confirmed NSCLC who underwent 3D-CRT between 2005 and 2014. The median duration of patient observation was 17.0 months (range, 1.0–64.0 months). Complete and partial responses occurred in 13.8 and 44.8 % of patients, respectively, and the overall response rate was 58.2 %. Meanwhile, the 1- and 3-year survival rates were 65.8 and 33.8 %, respectively. In T2 NSCLC, the median survival time (MST) was 12 months, and the 1- and 3-year survival rates were 62.4 and 21.4 %, respectively. In T3 NSCLC, the MST was 17 months, and the 1- and 3-year survival rates were 72.9 and 48.6 %, respectively. Severe toxicities (Common Terminology Criteria Grade 3) were not observed. The mean biologically effective dose required to improve local control exceeded 80 Gy (range, 67.2–96.0 Gy). These findings support a role for 3D-CRT as a treatment option for patients who refuse or could not tolerate surgical therapy with early-stage NSCLC. Although this was a small, retrospective study, it may form the basis for future, larger controlled studies on 3D-CRT as a monotherapy for NSCLC

  17. Hemodialysis does not alter in vitro hepatic CYP3A4 and CYP2D6 metabolic activity in uremic serum

    Directory of Open Access Journals (Sweden)

    Decker BS

    2013-12-01

    Full Text Available Brian S Decker,1,2 Kalisha D O'Neill,1,2 Mary A Chambers,1,2 James E Slaven,3 Zhangsheng Yu,3 David R Jones,2,4 Sharon M Moe1,21Division of Nephrology, 2Department of Medicine, 3Department of Biostatistics, 4Division of Clinical Pharmacology, Department of Medicine, School of Medicine, Indiana University, Indianapolis, IN, USAAbstract: There is a paucity of studies evaluating the change in liver metabolism in subjects receiving hemodialysis. The purpose of this study was to compare the effect of uremic toxins on hepatic cytochrome P450 (CYP3A4 and CYP2D6 metabolism before and after a 4-hour hemodialysis session. Midazolam and dextromethorphan were incubated with uremic serum collected from subjects before and after the 4-hour hemodialysis session. Analysis and quantification of the 1'-OH-midazolam and 4-OH-midazolam and dextrorphan metabolites were performed by high-pressure liquid chromatography/mass spectrometry. Statistical analysis using the Student's t-test (paired was used to compare the amount of metabolite formed. The mean amount of 1'-OH-midazolam, 4-OH-midazolam, and dextrorphan metabolites formed before and after hemodialysis did not significantly differ. There was no significant difference in CYP3A4 and CYP2D6 metabolic activity in uremic serum before and after hemodialysis.Keywords: hemodialysis, uremia, CYP3A4, CYP2D6, metabolism

  18. Relationship between long working hours and depression: a 3-year longitudinal study of clerical workers.

    Science.gov (United States)

    Amagasa, Takashi; Nakayama, Takeo

    2013-08-01

    To clarify how long working hours affect the likelihood of current and future depression. Using data from four repeated measurements collected from 218 clerical workers, four models associating work-related factors to the depressive mood scale were established. The final model was constructed after comparing and testing the goodness-of-fit index using structural equation modeling. Multiple logistic regression analysis was also performed. The final model showed the best fit (normed fit index = 0.908; goodness-of-fit index = 0.936; root-mean-square error of approximation = 0.018). Its standardized total effect indicated that long working hours affected depression at the time of evaluation and 1 to 3 years later. The odds ratio for depression risk was 14.7 in employees who were not long-hours overworked according to the initial survey but who were long-hours overworked according to the second survey. Long working hours increase current and future risks of depression.

  19. A 3D T1-weighted gradient-echo sequence for routine use in 3D radiosurgical treatment planning of brain metastases: first clinical results

    International Nuclear Information System (INIS)

    Hawighorst, H.; Schad, L.R.; Gademann, G.; Knopp, M.V.; Wenz, F.; Kaick, G. van

    1995-01-01

    The authors report on a 3D sequence for MRI of the brain and its application in radiosurgical treatment planning of 35 brain metastases. The measuring sequence, called magnetization - prepared rapid gradient echo (MPRAGE), was compared with 2D T1-weighted spin-echo (SE) sequences following intravenous contrast-medium application in 19 patients with brain metastases. The average diameter of all lesions was similar in both sequences, with 16.8 and 17.0 mm for SE and MPRAGE, respectively. Target point definition was equal in 29 metastases, and in 6 cases superior on MPRAGE, due to better gray-white matter contrast and increased contrast enhancement. In cases of bleeding metastases there was improved depiction of internal structures in 3D MRI. Postprocessing of 3D MPRAGE data created multiplanar reconstruction along any chosen plane with isotropic spatial resolution, which helped to improve radiosurgical isodose distribution in 4 cases when compared to 2D SE. However, sensitivity of 3D MPRAGE to detect small lesions (< 3 mm) was decreased in one patient with more than 50 metastases. We conclude that 3D gradient-echo (GE) imaging might be of great value for radiosurgical treatment planning, but does not replace 2D SE with its current parameters. (orig.)

  20. New Approach To Hour-By-Hour Weather Forecast

    Science.gov (United States)

    Liao, Q. Q.; Wang, B.

    2017-12-01

    Fine hourly forecast in single station weather forecast is required in many human production and life application situations. Most previous MOS (Model Output Statistics) which used a linear regression model are hard to solve nonlinear natures of the weather prediction and forecast accuracy has not been sufficient at high temporal resolution. This study is to predict the future meteorological elements including temperature, precipitation, relative humidity and wind speed in a local region over a relatively short period of time at hourly level. By means of hour-to-hour NWP (Numeral Weather Prediction)meteorological field from Forcastio (https://darksky.net/dev/docs/forecast) and real-time instrumental observation including 29 stations in Yunnan and 3 stations in Tianjin of China from June to October 2016, predictions are made of the 24-hour hour-by-hour ahead. This study presents an ensemble approach to combine the information of instrumental observation itself and NWP. Use autoregressive-moving-average (ARMA) model to predict future values of the observation time series. Put newest NWP products into the equations derived from the multiple linear regression MOS technique. Handle residual series of MOS outputs with autoregressive (AR) model for the linear property presented in time series. Due to the complexity of non-linear property of atmospheric flow, support vector machine (SVM) is also introduced . Therefore basic data quality control and cross validation makes it able to optimize the model function parameters , and do 24 hours ahead residual reduction with AR/SVM model. Results show that AR model technique is better than corresponding multi-variant MOS regression method especially at the early 4 hours when the predictor is temperature. MOS-AR combined model which is comparable to MOS-SVM model outperform than MOS. Both of their root mean square error and correlation coefficients for 2 m temperature are reduced to 1.6 degree Celsius and 0.91 respectively. The

  1. A Robust High-Performance GPS L1 Receiver with Single-stage Quadrature Redio-Frequency Circuit

    Science.gov (United States)

    Liu, Jianghua; Xu, Weilin; Wan, Qinq; Liu, Tianci

    2018-03-01

    A low power current reuse single-stage quadrature raido-frequency part (SQRF) is proposed for GPS L1 receiver in 180nm CMOS process. The proposed circuit consists of LNA, Mixer, QVCO, is called the QLMV cell. A two blocks stacked topology is adopted in this design. The parallel QVCO and mixer placed on the top forms the upper stacked block, and the LNA placed on the bottom forms the other stacked block. The two blocks share the current and achieve low power performance. To improve the stability, a float current source is proposed. The float current isolated the local oscillation signal and the input RF signal, which bring the whole circuit robust high-performance. The result shows conversion gain is 34 dB, noise figure is three dB, the phase noise is -110 dBc/Hz at 1MHz and IIP3 is -20 dBm. The proposed circuit dissipated 1.7mW with 1 V supply voltage.

  2. Construction of static 3D ultrasonography image by radiation beam tracking method from 1D array probe

    Energy Technology Data Exchange (ETDEWEB)

    Doh, Il; Kim, Yong Tae; Ahn, Bong Young [Center for Medical Metrology, Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Kim, Kwang Youn [Meta biomed Co.,Ltd, Cheongju (Korea, Republic of)

    2015-04-15

    This paper describes the construction of a static 3D ultrasonography image by tracking the radiation beam position during the handy operation of a 1D array probe to enable point-of-care use. The theoretical model of the transformation from the translational and rotational information of the sensor mounted on the probe to the reference Cartesian coordinate system was given. The signal amplification and serial communication interface module was made using a commercially available sensor. A test phantom was also made using silicone putty in a donut shape. During the movement of the hand-held probe, B-mode movie and sensor signals were recorded. B-mode images were periodically selected from the movie, and the gray levels of the pixels for each image were converted to the gray levels of 3D voxels. 3D and 2D images of arbitrary cross-section of the B-mode type were also constructed from the voxel data, and agreed well with the shape of the test phantom.

  3. 3D-LIN: A Configurable Low-Latency Interconnect for Multi-Core Clusters with 3D Stacked L1 Memory

    OpenAIRE

    Beanato, Giulia; Loi, Igor; De Micheli, Giovanni; Leblebici, Yusuf; Benini, Luca

    2012-01-01

    Shared L1 memories are of interest for tightly- coupled processor clusters in programmable accelerators as they provide a convenient shared memory abstraction while avoiding cache coherence overheads. The performance of a shared-L1 memory critically depends on the architecture of the low-latency interconnect between processors and memory banks, which needs to provide ultra-fast access to the largest possible L1 working set. The advent of 3D technology provides new opportunities to improve the...

  4. Aerosolization of fungi, (13)-β-D glucan, and endotoxin from flood-affected materials collected in New Orleans homes

    Science.gov (United States)

    Adhikari, Atin; Jung, Jaehee; Reponen, Tiina; Lewis, Jocelyn Suzanne; DeGrasse, Enjoli C.; Grimsley, L. Faye; Chew, Ginger L.; Grinshpun, Sergey A.

    2015-01-01

    Standing water and sediments remaining on flood-affected materials were the breeding ground for many microorganisms in flooded homes following Hurricane Katrina. The purpose of this laboratory study was to examine the aerosolization of culturable and total fungi, (13)-β-D glucan, and endotoxin from eight flood-affected floor and bedding materials collected in New Orleans homes, following Hurricane Katrina. Aerosolization was examined using the Fungal Spore Source Strength Tester (FSSST) connected to a BioSampler. Dust samples were collected by vacuuming. A two-stage cyclone sampler was used for size-selective analysis of aerosolized glucan and endotoxin. On average, levels of culturable fungi ranged from undetectable (lower limit = 8.3×104) to 2.6×105 CFU/m2; total fungi ranged from 2.07×105 to 1.6×106 spores/m2; (13)-β-D glucan and endotoxin were 2.0×103 – 2.9×104 ng/m2 and 7.0×102 – 9.3×104 EU/m2, respectively. The results showed that 5–15 min sampling is sufficient for detecting aerosolizable biocontaminants with the FSSST. Smaller particle size fractions (1.8 μm) fractions, which raises additional exposure concerns. Vacuuming was found to overestimate inhalation exposure risks by a factor of approximately 102 for (13)-β-D glucan and by 103 to 104 for endotoxin as detected by the FSSST. The information generated from this study is important with respect to restoration and rejuvenation of the flood-affected areas in New Orleans. We believe the findings will be significant during similar disasters in other regions of the world including major coastal floods from tsunamis. PMID:19201399

  5. One-pot Microwave-Assisted Synthesis of 1H-Phenanthro[9,10- d][1,2,3]triazole

    Directory of Open Access Journals (Sweden)

    Mehrak Faraji

    2008-09-01

    Full Text Available In this study, a fast and good yield one-pot microwave-assisted synthesis (45 seconds of 1H-phenanthro[9,10-d][1,2,3]triazole by a 1,3-dipolar cycloaddition reaction of sodium azide and 9-bromophenanthrene in the presence of potassium tert-butoxide in DMSO as solvent is reported.

  6. CYP24A1 inhibition facilitates the anti-tumor effect of vitamin D3 on colorectal cancer cells

    Science.gov (United States)

    Kósa, János P; Horváth, Péter; Wölfling, János; Kovács, Dóra; Balla, Bernadett; Mátyus, Péter; Horváth, Evelin; Speer, Gábor; Takács, István; Nagy, Zsolt; Horváth, Henrik; Lakatos, Péter

    2013-01-01

    AIM: The effects of vitamin D3 have been investigated on various tumors, including colorectal cancer (CRC). 25-hydroxyvitamin-D3-24-hydroxylase (CYP24A1), the enzyme that inactivates the active vitamin D3 metabolite 1,25-dihydroxyvitamin D3 (1,25-D3), is considered to be the main enzyme determining the biological half-life of 1,25-D3. During colorectal carcinogenesis, the expression and concentration of CYP24A1 increases significantly, suggesting that this phenomenon could be responsible for the proposed efficacy of 1,25-D3 in the treatment of CRC. The aim of this study was to investigate the anti-tumor effects of vitamin D3 on the human CRC cell line Caco-2 after inhibition of the cytochrome P450 component of CYP24A1 activity. METHODS: We examined the expression of CYP24A1 mRNA and the effects of 1,25-D3 on the cell line Caco-2 after inhibition of CYP24A1. Cell viability and proliferation were determined by means of sulforhodamine-B staining and bromodeoxyuridine incorporation, respectively, while cytotoxicity was estimated via the lactate dehydrogenase content of the cell culture supernatant. CYP24A1 expression was measured by real-time reverse transcription polymerase chain reaction. A number of tetralone compounds were synthesized to investigate their CP24A1 inhibitory activity. RESULTS: In response to 1,25-D3, CYP24A1 mRNA expression was enhanced significantly, in a time- and dose-dependent manner. Caco-2 cell viability and proliferation were not influenced by the administration of 1,25-D3 alone, but were markedly reduced by co-administration of 1,25-D3 and KD-35, a CYP24A1-inhibiting tetralone. Our data suggest that the mechanism of action of co-administered KD-35 and 1,25-D3 does not involve a direct cytotoxic effect, but rather the inhibition of cell proliferation. CONCLUSION: These findings demonstrate that the selective inhibition of CYP24A1 by compounds such as KD-35 may be a new approach for enhancement of the anti-tumor effect of 1,25-D3 on CRC. PMID

  7. Effect of Aflatoxin B1 on Growth of Bovine Mammary Epithelial Cells in 3D and Monolayer Culture System.

    Science.gov (United States)

    Forouharmehr, Ali; Harkinezhad, Taher; Qasemi-Panahi, Babak

    2013-01-01

    Many studies have been showed transfer of aflatoxins, toxins produced by Aspergillus flvaus and Aspergillus parasiticus fungi, into milk. These toxins are transferred into the milk through digestive system by eating contaminated food. Due to the toxicity of these materials, it seems that it has side effects on the growth of mammary cells. Therefore, the present work aimed to investigate possible toxic effects of aflatoxin B1 (AFB1) on bovine mammary epithelial cells in monolayer and three-dimensional cultures. Specimens of the mammary tissue of bovine were sized out in size 2×2 cm in slaughterhouse. After disinfection and washing in sterile PBS, primary cell culture was performed by enzymatic digestion of tissue with collagenase. When proper numbers of cells were achieved in monolayer culture, cells were seeded in a 24-well culture plate for three-dimensional (3D) culture in Matrigel matrix. After 21 days of 3D culture and reaching the required number of cells, the concentrations of 15, 25 and 35 µL of AFB1 were added to the culture in quadruplicate and incubated for 8 hours. Cellular cytotoxicity was examined using standard colorimetric assay and finally, any change in the morphology of the cells was studied by microscopic technique. Microscopic investigations showed necrosis of the AFB1-exposed cells compared to the control cells. Also, bovine mammary epithelial cells were significantly affected by AFB1 in dose and time dependent manner in cell viability assays. According to the results, it seems that AFB1 can induce cytotoxicity and necrosis in bovine mammary epithelial cells.

  8. Ocular torsion before and after 1 hour centrifugation

    NARCIS (Netherlands)

    Groen, E.; Graaf, B. de; Bles, W.; Bos, J.E.

    1996-01-01

    To assess a possible otolith contribution to effects observed following prolonged expo-sure to hyper gravity, we used video-oculography to measure ocular torsion during static and dynamic conditions of lateral body tilt (roll) before and after one hour of centrifugation with a Gx-load of 3G. Static

  9. Synthesis and structural characterization of two cobalt phosphites: 1-D (H3NC6H4NH3)Co(HPO3)2 and 2-D (NH4)2Co2(HPo3)3

    International Nuclear Information System (INIS)

    Cheng, C.-C.; Chang, W.-K.; Chiang, R.-K.; Wang, S.-L.

    2010-01-01

    Two new cobalt phosphites, (H 3 NC 6 H 4 NH 3 )Co(HPO 3 ) 2 (1) and (NH 4 ) 2 Co 2 (HPO 3 ) 3 (2), have been synthesized and characterized by single-crystal X-ray diffraction. All the cobalt atoms of 1 are in tetrahedral CoO 4 coordination. The structure of 1 comprises twisted square chains of four-rings, which contain alternating vertex-shared CoO 4 tetrahedra and HPO 3 groups. These chains are interlinked with trans-1,4-diaminocyclohexane cations by hydrogen bonds. The 2-D structure of 2 comprises anionic complex sheets with ammonium cations present between them. An anionic complex sheet contains three-deck phosphite units, which are interconnected by Co 2 O 9 to form complex layers. Magnetic susceptibility measurements of 1 and 2 showed that they have a weak antiferromagnetic interaction. - Graphical abstract: The 2-D structure of (NH 4 ) 2 Co 2 (HPO 3 ) 3 comprises anionic complex sheets with ammonium cations present between them. An anionic complex sheet contains three-deck phosphite units, which are interconnected by dimmeric Co 2 O 9 to form complex layers.

  10. Glycogen synthase kinase 3 has a limited role in cell cycle regulation of cyclin D1 levels.

    Science.gov (United States)

    Yang, Ke; Guo, Yang; Stacey, William C; Harwalkar, Jyoti; Fretthold, Jonathan; Hitomi, Masahiro; Stacey, Dennis W

    2006-08-30

    The expression level of cyclin D1 plays a vital role in the control of proliferation. This protein is reported to be degraded following phosphorylation by glycogen synthase kinase 3 (GSK3) on Thr-286. We recently showed that phosphorylation of Thr-286 is responsible for a decline in cyclin D1 levels during S phase, an event required for efficient DNA synthesis. These studies were undertaken to test the possibility that phosphorylation by GSK3 is responsible for the S phase specific decline in cyclin D1 levels, and that this event is regulated by the phosphatidylinositol 3-kinase (PI3K)/AKT signaling pathway which controls GSK3. We found, however, that neither PI3K, AKT, GSK3, nor proliferative signaling activity in general is responsible for the S phase decline in cyclin D1 levels. In fact, the activity of these signaling kinases does not vary through the cell cycle of proliferating cells. Moreover, we found that GSK3 activity has little influence over cyclin D1 expression levels during any cell cycle phase. Inhibition of GSK3 activity by siRNA, LiCl, or other chemical inhibitors failed to influence cyclin D1 phosphorylation on Thr-286, even though LiCl efficiently blocked phosphorylation of beta-catenin, a known substrate of GSK3. Likewise, the expression of a constitutively active GSK3 mutant protein failed to influence cyclin D1 phosphorylation or total protein expression level. Because we were unable to identify any proliferative signaling molecule or pathway which is regulated through the cell cycle, or which is able to influence cyclin D1 levels, we conclude that the suppression of cyclin D1 levels during S phase is regulated by cell cycle position rather than signaling activity. We propose that this mechanism guarantees the decline in cyclin D1 levels during each S phase; and that in so doing it reduces the likelihood that simple over expression of cyclin D1 can lead to uncontrolled cell growth.

  11. Software for 3D diagnostic image reconstruction and analysis

    International Nuclear Information System (INIS)

    Taton, G.; Rokita, E.; Sierzega, M.; Klek, S.; Kulig, J.; Urbanik, A.

    2005-01-01

    Recent advances in computer technologies have opened new frontiers in medical diagnostics. Interesting possibilities are the use of three-dimensional (3D) imaging and the combination of images from different modalities. Software prepared in our laboratories devoted to 3D image reconstruction and analysis from computed tomography and ultrasonography is presented. In developing our software it was assumed that it should be applicable in standard medical practice, i.e. it should work effectively with a PC. An additional feature is the possibility of combining 3D images from different modalities. The reconstruction and data processing can be conducted using a standard PC, so low investment costs result in the introduction of advanced and useful diagnostic possibilities. The program was tested on a PC using DICOM data from computed tomography and TIFF files obtained from a 3D ultrasound system. The results of the anthropomorphic phantom and patient data were taken into consideration. A new approach was used to achieve spatial correlation of two independently obtained 3D images. The method relies on the use of four pairs of markers within the regions under consideration. The user selects the markers manually and the computer calculates the transformations necessary for coupling the images. The main software feature is the possibility of 3D image reconstruction from a series of two-dimensional (2D) images. The reconstructed 3D image can be: (1) viewed with the most popular methods of 3D image viewing, (2) filtered and processed to improve image quality, (3) analyzed quantitatively (geometrical measurements), and (4) coupled with another, independently acquired 3D image. The reconstructed and processed 3D image can be stored at every stage of image processing. The overall software performance was good considering the relatively low costs of the hardware used and the huge data sets processed. The program can be freely used and tested (source code and program available at

  12. Excitation-energy dependence of the resonant Auger transitions to the 4p4(1D)np (n=5,6) states across the 3d3/2-15p and 3d5/2-16p resonances in Kr

    International Nuclear Information System (INIS)

    Sankari, A.; Alitalo, S.; Nikkinen, J.; Kivimaeki, A.; Aksela, S.; Aksela, H.; Fritzsche, S.

    2007-01-01

    The energy dependencies of the intensities and angular distribution parameters β of the resonant Auger final states 4p 4 ( 1 D)np (n=5,6) of Kr were determined experimentally in the excitation-energy region of the overlapping 3d 3/2 -1 5p and 3d 5/2 -1 6p resonances. The experimental results were compared with the outcome of multiconfiguration Dirac-Fock calculations. Combining experimental and calculated results allowed us to study interference effects between the direct and several resonant channels that populate the 4p 4 ( 1 D)np states. The inclusion of the direct channel was crucial in order to reproduce the observed energy behavior of the angular distribution parameters. It was also important to take into account experimentally observed shake transitions

  13. Optimized volumetric modulated arc therapy versus 3D-CRT for early stage mediastinal Hodgkin lymphoma without axillary involvement: a comparison of second cancers and heart disease risk.

    Science.gov (United States)

    Filippi, Andrea Riccardo; Ragona, Riccardo; Piva, Cristina; Scafa, Davide; Fiandra, Christian; Fusella, Marco; Giglioli, Francesca Romana; Lohr, Frank; Ricardi, Umberto

    2015-05-01

    The purpose of this study was to evaluate the risks of second cancers and cardiovascular diseases associated with an optimized volumetric modulated arc therapy (VMAT) planning solution in a selected cohort of stage I/II Hodgkin lymphoma (HL) patients treated with either involved-node or involved-site radiation therapy in comparison with 3-dimensional conformal radiation therapy (3D-CRT). Thirty-eight patients (13 males and 25 females) were included. Disease extent was mediastinum alone (n=8, 21.1%); mediastinum plus unilateral neck (n=19, 50%); mediastinum plus bilateral neck (n=11, 29.9%). Prescription dose was 30 Gy in 2-Gy fractions. Only 5 patients had mediastinal bulky disease at diagnosis (13.1%). Anteroposterior 3D-CRT was compared with a multiarc optimized VMAT solution. Lung, breast, and thyroid cancer risks were estimated by calculating a lifetime attributable risk (LAR), with a LAR ratio (LAR(VMAT)-to-LAR(3D-CRT)) as a comparative measure. Cardiac toxicity risks were estimated by calculating absolute excess risk (AER). The LAR ratio favored 3D-CRT for lung cancer induction risk in mediastinal alone (P=.004) and mediastinal plus unilateral neck (P=.02) presentations. LAR ratio for breast cancer was lower for VMAT in mediastinal plus bilateral neck presentations (P=.02), without differences for other sites. For thyroid cancer, no significant differences were observed, regardless of anatomical presentation. A significantly lower AER of cardiac (P=.038) and valvular diseases (Pdisease extent. In a cohort of patients with favorable characteristics in terms of disease extent at diagnosis (large prevalence of nonbulky presentations without axillary involvement), optimized VMAT reduced heart disease risk with comparable risks of thyroid and breast cancer, with an increase in lung cancer induction probability. The results are however strongly influenced by the different anatomical presentations, supporting an individualized approach. Copyright © 2015 Elsevier

  14. Structure and thermodynamic properties of (C5H12N)CuBr3: a new weakly coupled antiferromagnetic spin-1/2 chain complex lying in the 1D-3D dimensional cross-over regime.

    Science.gov (United States)

    Pan, Bingying; Wang, Yang; Zhang, Lijuan; Li, Shiyan

    2014-04-07

    Single crystals of a metal organic complex (C5H12N)CuBr3 (C5H12N = piperidinium, pipH for short) have been synthesized, and the structure was determined by single-crystal X-ray diffraction. (pipH)CuBr3 crystallizes in the monoclinic group C2/c. Edging-sharing CuBr5 units link to form zigzag chains along the c axis, and the neighboring Cu(II) ions with spin-1/2 are bridged by bibromide ions. Magnetic susceptibility data down to 1.8 K can be well fitted by the Bonner-Fisher formula for the antiferromagnetic spin-1/2 chain, giving the intrachain magnetic coupling constant J ≈ -17 K. At zero field, (pipH)CuBr3 shows three-dimensional (3D) order below TN = 1.68 K. Calculated by the mean-field theory, the interchain coupling constant J' = -0.91 K is obtained and the ordered magnetic moment m0 is about 0.23 μB. This value of m0 makes (pipH)CuBr3 a rare compound suitable to study the 1D-3D dimensional cross-over problem in magnetism, since both 3D order and one-dimensional (1D) quantum fluctuations are prominent. In addition, specific heat measurements reveal two successive magnetic transitions with lowering temperature when external field μ0H ≥ 3 T is applied along the a' axis. The μ0H-T phase diagram of (pipH)CuBr3 is roughly constructed.

  15. When to stop pushing: effects of duration of second-stage expulsion efforts on maternal and neonatal outcomes in nulliparous women with epidural analgesia.

    Science.gov (United States)

    Le Ray, Camille; Audibert, François; Goffinet, François; Fraser, William

    2009-10-01

    The purpose of this study was to assess the influence of the duration of active second-stage labor on maternal and neonatal outcomes. Secondary analysis of the Pushing Early Or Pushing Late with Epidural trial that included 1862 nulliparous women with epidural analgesia who were in the second stage of labor. According to duration of active second-stage labor, we estimated the proportion of spontaneous vaginal deliveries (SVD) with a newborn infant without signs of asphyxia (5-minute Apgar score > or =7 and arterial pH >7.10). We also analyzed maternal and neonatal outcomes according to the duration of expulsive efforts. Relative to the first hour of expulsive efforts, the chances of a SVD of a newborn infant without signs of asphyxia decreased significantly every hour (1- to 2-hour adjusted odds ratio, 0.4; 95% confidence interval [CI], 0.3-0.6; 2- to 3-hour adjusted odds ratio, 0.1; 95% CI, 0.09-0.2; >3-hour adjusted odds ratio, 0.03; 95% CI, 0.02-0.05). The risk of postpartum hemorrhage and intrapartum fever increased significantly after 2 hours of pushing. Faced with a decreasing probability of SVD and increased maternal risk of morbidity after 2 hours, we raise the question as to whether expulsive efforts should be continued after this time.

  16. Voltammetric Studies on Vitamins D2 and D3 in Organic Solvents

    International Nuclear Information System (INIS)

    Chan, Ya Yun; Yue, Yanni; Webster, Richard D.

    2014-01-01

    Highlights: • Vitamins D 2 and D 3 undergo a chemically irreversible oxidation process. • The electrochemical oxidation occurs via one-electron on short (CV) time-scales. • On long time scales (electrolysis) the oxidation occurs via two-electrons. • Chemical oxidation was performed using two molar equivalents of NO + . • Oxidation occurs at the triene moiety. - Abstract: The electrochemical behavior of vitamins D 2 and D 3 were examined by performing cyclic voltammetry (CV), rotating disk electrode voltammetry, controlled potential electrolysis and chemical oxidation in aprotic organic solvents. Both vitamins were electrochemically oxidized in dichloromethane and acetonitrile (E p ox ∼ +0.8 vs. (Fc/Fc + )/V, where E p ox is the anodic peak potential and Fc = ferrocene) via a one-electron chemically irreversible process on the short voltammetric time scale (≤ seconds). Varying the scan rate (0.1 V s −1 to 20 V s −1 ) and temperature (233 K to 293 K) did not strongly affect the voltammetric response recorded on platinum and glassy carbon electrode surfaces with the oxidation process remaining chemically irreversible over the range of scan rates and temperatures tested, indicating that the initially formed cation radical was not long-lived. Repetitive CV experiments indicated that the oxidized product partially adsorbed onto the electrode surface, resulting in diminishing peak currents with multiple scans. Bulk controlled potential electrolysis of the vitamin D compounds performed by alternating several cycles of oxidative electrolysis and reductive pulsed stripping proved to be effective in stripping the adsorbed species off the electrode surfaces. Longer time scale bulk electrolysis experiments led to the detection of a new oxidation peak appearing at less positive potentials as the electrolysis progressed, suggesting that the compounds underwent oxidation on long time scales (minutes to hours) via a two electron process. The vitamins were most

  17. Comparison of Bispectral Index™ values during the flotation restricted environmental stimulation technique and results for stage I sleep: a prospective pilot investigation.

    Science.gov (United States)

    Dunham, C Michael; McClain, Jesse V; Burger, Amanda

    2017-11-29

    To determine whether Bispectral Index™ values obtained during flotation-restricted environment stimulation technique have a similar profile in a single observation compared to literature-derived results found during sleep and other relaxation-induction interventions. Bispectral Index™ values were as follows: awake-state, 96.6; float session-1, 84.3; float session-2, 82.3; relaxation-induction, 82.8; stage I sleep, 86.0; stage II sleep, 66.2; and stages III-IV sleep, 45.1. Awake-state values differed from float session-1 (%difference 12.7%; Cohen's d = 3.6) and float session-2 (%difference 14.8%; Cohen's d = 4.6). Relaxation-induction values were similar to float session-1 (%difference 1.8%; Cohen's d = 0.3) and float session-2 (%difference 0.5%; Cohen's d = 0.1). Stage I sleep values were similar to float session-1 (%difference 1.9%; Cohen's d = 0.4) and float session-2 (%difference 4.3%; Cohen's d = 1.0). Stage II sleep values differed from float session-1 (%difference 21.5%; Cohen's d = 4.3) and float session-2 (%difference 19.6%; Cohen's d = 4.0). Stages III-IV sleep values differed from float session-1 (%difference 46.5%; Cohen's d = 5.6) and float session-2 (%difference 45.2%; Cohen's d = 5.4). Bispectral Index™ values during flotation were comparable to those found in stage I sleep and nadir values described with other relaxation-induction techniques.

  18. Detection of radiation transitions between 4d9(D5/3,3/2)5s2nl and 4d105p(2P1/2,3/20)nl of self-ionized states of cadmium atom at electron-ion collisions

    International Nuclear Information System (INIS)

    Gomonaj, A.N.; Imre, A.I.

    2005-01-01

    Radiation transitions between 4d 9 ( 2 D 5/2,3/2 )5s 2 nl and 4d 10 5p( 2 P 1/2,3/2 0 )nl self-ionized states of Cd atom being dielectron satellites of λ325.0 nm (4d 9 5s 22 D 3/2 →4d 10 5p 2 P 1/2 0 ) and λ353.6 nm (4d 9 5s 22 D 3/2 → 4d 10 5p 2 P 3/2 0 ) laser lines of Cd + ion were detected for the first time at electron-ion collisions. One studied energy dependences of the effective cross sections of electron excitation of the satellite lines within 7-10 eV energy range. The effective cross sections of excitation of dielectron satellites constitutes ∼ 10 -17 cm 2 that is comparable with the efficiency of excitation of the laser lines [ru

  19. Diminished internalization and action of 1,25-dihydroxyvitamin D3 in dermal fibroblasts cultured from New World primates

    International Nuclear Information System (INIS)

    Adams, J.S.; Gacad, M.A.; Baker, A.J.; Kheun, G.; Rude, R.K.

    1985-01-01

    We investigated the occurrence of 1,25-dihydroxyvitamin D3 [1,25-(OH)2D3]-resistant osteomalacia in the New World primate colony of Saguinus imperator at the Los Angeles Zoo. The mean serum concentration of 1,25-(OH)2D3 was elevated 5-fold in the New World primates compared to that in their Old World counterparts. The specific internalization of 0.6 nM [ 3 H]1,25-(OH)2D3 by cultured dermal fibroblasts from New World primates was reduced 75% compared to that by cells from Old World primates or man. The decrease in hormone uptake resulted from a decrease in the number of high affinity intracellular binding sites for 1,25-(OH)2D3 and apparently caused a 90-95% reduction in 1,25-(OH)2D3-induced 25-hydroxyvitamin-D3-24-hydroxylase activity. There was no alteration in the capacity or avidity of New World primate serum for 1,25-(OH)2D3 compared to that of serum from Old World primates. These data suggest that the occurrence of vitamin D-resistant osteomalacia in New World primates is the result of decreased high affinity, receptor-mediated uptake of 1,25-(OH)2D3 by the target cell

  20. Designing TSVs for 3D Integrated Circuits

    CERN Document Server

    Khan, Nauman

    2013-01-01

    This book explores the challenges and presents best strategies for designing Through-Silicon Vias (TSVs) for 3D integrated circuits.  It describes a novel technique to mitigate TSV-induced noise, the GND Plug, which is superior to others adapted from 2-D planar technologies, such as a backside ground plane and traditional substrate contacts. The book also investigates, in the form of a comparative study, the impact of TSV size and granularity, spacing of C4 connectors, off-chip power delivery network, shared and dedicated TSVs, and coaxial TSVs on the quality of power delivery in 3-D ICs. The authors provide detailed best design practices for designing 3-D power delivery networks.  Since TSVs occupy silicon real-estate and impact device density, this book provides four iterative algorithms to minimize the number of TSVs in a power delivery network. Unlike other existing methods, these algorithms can be applied in early design stages when only functional block- level behaviors and a floorplan are available....

  1. Alur Kerja Tahap Produksi Karakter Animasi Serial 3D Menggunakan Perangkat Lunak Maxon Cinema 4D

    Directory of Open Access Journals (Sweden)

    Ardiyan Ardiyan

    2011-04-01

    Full Text Available 3D Animation serial for television needs have been showed in the national television program, especially fantasy theme and educational program for children. There are so many and sequential needs which tricked by instant and high quality production so the work flow in creating 3D animation serial are facilitating the producers. The article will explain specifically how the software of Maxon Cinema 4D in process production in 3D animation serial. The article will also clarify and focus on how the work flow of Maxon Cinema 4D software in processing production and post-production stages. The writer does research including audio visual tutorial, end-result comparison and rendering time between some software, self-observation of work flow in creating 3D animation serial using Maxon Cinema 4D software and digital literature study (e-book.  

  2. Coal-fired MHD combustor development project: Phase 3D

    Science.gov (United States)

    1985-05-01

    This fourth quarterly technical progress report of the Coal-Fired MHD Combustor Development Project (Phase 3D) presents the accomplishments during the period February 1 to April 30, 1985. The scope of work covered by this quarterly report encompasses development work on the 50 MW/sub t/ combustor related to test support at the CDIF, assembly and checkout of first and second stage hardware, second stage design verification testing, designs for a continuous slag rejector and low preheat inlet section, and planning for power train testing. Progress includes the following: assembly and checkout of the second first stage, two second stages, and PEM was completed and the hardware was shipped to CDIF and FETS; integration of first and second stage hardware on the FETS Cell No. 2 test stand was completed, cold flow functional tests were performed, and hot fire checkout testing was initiated; assembly of the continuous slag rejector test set-up was 70% completed; the low preheat air inlet section Preliminary Design Review was held (work on the detail design was initiated and is 85% complete); and the Users' Manual was updated to include material for the second stage and final revisions to the power train test plan were made.

  3. Evaluation of 99Tcm-trodat-1 SPECT/CT imaging in the diagnosis of parkinson's disease in early stage

    International Nuclear Information System (INIS)

    Liu Xiaohua; Tai Jian; Zhang Fuhai; Xiao Qian; Jia Qiang; Dong Feng

    2004-01-01

    Parkinson's disease is a progressive neurodegenerative disorder characterized by a selective loss of dopamine in the striatum with age. At present, the diagnosis of Parkinson's disease is mainly remained in clinical standard. According to the clinical symptoms and the response to DOPA treatment, it is not difficult to diagnose typical PD. But it is difficult to diagnose early stage PD, which lacks the typical clinical symptoms and signs. A 99Tcm -labeled tropane derivative that binds to dopamine transporter with high selectivity is [2- [ [2- [ [ [3- (4-chlorophenyl)- 8-methyl- 8-azabicyclo [3,2,1 ] oct-2-yl]methyl] (2-mercaptoethyl)amino] eth yl]amino]ethanethiolato(3-)-N2,N2',S2,S2'] oxo-[1R-(exo-exo)] (TRODAT-1). Objective: The purpose of this study is to evaluate the clinical application of 99Tcm-TRODAT-1 SPECT/CT imaging in the diagnosis of Parkinson's disease (PD) in early stage. Methods: Twenty-four patients with early-stage idiopathic Parkinson's disease were recruited. For all patients, the severity was assessed by the Hoehnand Yahrscale. Twenty-four early stage PD patients (15 Hoehn Yahr stage I and 9 Hoehn Yahr stage II), eight advanced PD patients and ten healthy volunteers (five men, five women) were studied by 99Tcm-TRODAT-1 SPECT/CT imaging. 99Tcm-TRODAT-1 was prepared from a lyophilized kit. Brain SPECT imaging was performed 2 hours after injection, using GE Discovery VH equipped with FanBeam collimators. Data were obtained using energy window of 20% centered on 140 KEV for 99Tcm. The brain SPECT data were acquired after Hawkeye CT acquisition. Regions of interest were delineated over the striata and the cerebella, and the ratios of striatum-to-cerebellum (ST/CB) were calculated. Specific uptake in the striatum and its subregions, including the putamen and caudate nucleus, was calculated and compared with that of the other side as well as that of healthy volunteers. Results: Dopamine transporter (DAT) imaging of the 10 healthy volunteers showed

  4. Vitamin D levels do not predict the stage of hepatic fibrosis in patients with non-alcoholic fatty liver disease: A PRISMA compliant systematic review and meta-analysis of pooled data.

    Science.gov (United States)

    Saberi, Behnam; Dadabhai, Alia S; Nanavati, Julie; Wang, Lin; Shinohara, Russell T; Mullin, Gerard E

    2018-01-27

    To investigate the relationship between 25-hydroxyvitamin D [25(OH)D] levels and fibrosis stage in patients with non-alcoholic fatty liver disease (NAFLD). Two individual reviewers identified relevant studies using the PubMed, EMBASE, Cochrane, and Scopus databases. Inclusion criteria were as follows: (1) Studies that evaluated adults with NAFLD and serum or plasma 25(OH)D levels; and (2) assessed fibrosis stage using liver biopsy. A rigorous analysis yielded six articles as having sufficient data to employ in evaluating the association of serum vitamin D levels in patients with NAFLD based on their liver fibrosis stage by histopathological analysis. The lead investigators of each of the six studies were contacted and the data were collected. To meta-analyze vitamin D levels in F0-F2 vs F3-F4 fibrosis, a random-effects meta-analysis fit using restricted maximum likelihood was applied. To examine trends across each stage of fibrosis with respect to vitamin D levels, a meta-regression was performed. P analysis to evaluate the association of serum vitamin D levels in patients with NAFLD based on their liver fibrosis stage by histopathological analysis. The lead investigators of each of the six studies were contacted and the data were collected. First, the investigators performed a meta-analysis to compare serum vitamin D levels in patients with NAFLD with stage F0-F2 compared to F3-F4, which did not show significance [meta-estimate of the pooled mean difference = -0.86, P = 0.08 (-4.17, 2.46)]. A meta-regression evaluation of serum vitamin 25 (OH)D levels across the individual stages (F0-F4) of fibrosis did not show an association for the six included studies. Low vitamin D status is not associated with higher stages of liver fibrosis in patients with NAFLD.

  5. Clinical outcomes with olanzapine long-acting injection: impact of the 3-hour observation period on patient satisfaction and well-being

    Directory of Open Access Journals (Sweden)

    Anand E

    2016-10-01

    Full Text Available Ernie Anand,1 Lovisa Berggren,2 John Landry,3 Ágoston Tóth,4 Holland C Detke5 1Neuroscience Medical Affairs, Eli Lilly & Company Ltd, Windlesham, UK; 2Global Statistical Sciences, Lilly Deutschland GmbH, Bad Homburg, Germany; 3Global Statistical Sciences, Eli Lilly Canada Inc., Toronto, ON, Canada; 4Neuroscience, Lilly Hungary, Budapest, Hungary; 5Psychiatry and Pain Disorders, Lilly Research Laboratories, Eli Lilly and Company, Indianapolis, IN, USA Background: The objective of the present analysis is to determine the impact of the 3-hour observation period for olanzapine long-acting injection (LAI on patient satisfaction and well-being by comparing data collected before and after its implementation. Methods: This is a post hoc analysis of patients treated with olanzapine LAI in 1 a 6-month fixed-dose randomized controlled trial and/or 2 a 6-year open-label safety study. This analysis was limited to patients with schizophrenia who were treated with olanzapine LAI consistent with the approved indication and dosing recommendations of the European Union Summary of Product Characteristics (N=966. Of the 966 patients, the analysis further focused only on those patients who received both 1 at least one injection before the implementation of the 3-hour observation period and 2 at least one injection after implementation of the 3-hour observation period (N=487. Patient satisfaction was assessed with the three-item Patient Satisfaction with Medication Questionnaire-Modified. Responses were averaged across all postbaseline visits occurring before (ie, without the implementation of the 3-hour observation period and across all postbaseline visits occurring after (ie, with the implementation of the 3-hour observation period. In addition, the rate of postinjection delirium/sedation syndrome events was calculated. Results: There was no meaningful change after implementation of the 3-hour observation period in satisfaction (before: mean [SD] =4.0 [1.02] and

  6. Influence of 3D effects on 1D aerosol retrievals in synthetic, partially clouded scenes

    International Nuclear Information System (INIS)

    Stap, F.A.; Hasekamp, O.P.; Emde, C.; Röckmann, T.

    2016-01-01

    An important challenge in aerosol remote sensing is to retrieve aerosol properties in the vicinity of clouds and in cloud contaminated scenes. Satellite based multi-wavelength, multi-angular, photo-polarimetric instruments are particularly suited for this task as they have the ability to separate scattering by aerosol and cloud particles. Simultaneous aerosol/cloud retrievals using 1D radiative transfer codes cannot account for 3D effects such as shadows, cloud induced enhancements and darkening of cloud edges. In this study we investigate what errors are introduced on the retrieved optical and micro-physical aerosol properties, when these 3D effects are neglected in retrievals where the partial cloud cover is modeled using the Independent Pixel Approximation. To this end a generic, synthetic data set of PARASOL like observations for 3D scenes with partial, liquid water cloud cover is created. It is found that in scenes with random cloud distributions (i.e. broken cloud fields) and either low cloud optical thickness or low cloud fraction, the inversion algorithm can fit the observations and retrieve optical and micro-physical aerosol properties with sufficient accuracy. In scenes with non-random cloud distributions (e.g. at the edge of a cloud field) the inversion algorithm can fit the observations, however, here the retrieved real part of the refractive indices of both modes is biased. - Highlights: • An algorithm for retrieval of both aerosol and cloud properties is presented. • Radiative transfer models of 3D, partially clouded scenes are simulated. • Errors introduced in the retrieved aerosol properties are discussed.

  7. 3D-CDTI User Manual v2.1

    Science.gov (United States)

    Johnson, Walter; Battiste, Vernol

    2016-01-01

    The 3D-Cockpit Display of Traffic Information (3D-CDTI) is a flight deck tool that presents aircrew with: proximal traffic aircraft location, their current status and flight plan data; strategic conflict detection and alerting; automated conflict resolution strategies; the facility to graphically plan manual route changes; time-based, in-trail spacing on approach. The CDTI is manipulated via a touchpad on the flight deck, and by mouse when presented as part of a desktop flight simulator.

  8. 488-1D Ash Basin closure cap help modeling- Microdrain® liner option

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-08-03

    At the request of Area Completion Engineering and in support of the 488-1D Ash Basin closure, the Savannah River National Laboratory (SRNL) performed hydrologic simulations of the revised 488-1D Ash Basin closure cap design using the Hydrologic Evaluation of Landfill Performance (HELP) model. The revised design substitutes a MicroDrain Liner®—60-mil low-density polyethylene geomembrane structurally integrated with 130-mil drainage layer—for the previously planned drainage/barrier system—300-mil geosynthetic drainage layer (GDL), 300-mil geosynthetic clay liner (GCL), and 6-inch common fill soil layer. For a 25-year, 24-hour storm event, HELP model v3.07 was employed to (1) predict the peak maximum daily hydraulic head for the geomembrane layer, and (2) ensure that South Carolina Department of Health and Environmental Control (SCDHEC) requirements for the barrier layer (i.e., ≤ 12 inches hydraulic head on top of a barrier having a saturated hydraulic conductivity ≤ 1.0E-05 cm/s) will not be exceeded. A 25-year, 24-hour storm event at the Savannah River Site (SRS) is 6.1 inches rainfall (Weber 1998). HELP model v3.07 results based upon the new planned cap design suggest that the peak maximum daily hydraulic head on the geomembrane barrier layer will be 0.15 inches for a minimum slope equal to 3%, which is two orders of magnitude below the SCDHEC upper limit of 12 inches.

  9. 488-1D Ash basin closure cap help modeling-Microdrain® liner option

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-09-06

    At the request of Area Completion Engineering and in support of the 488-1D Ash Basin closure, the Savannah River National Laboratory (SRNL) performed hydrologic simulations of the revised 488-1D Ash Basin closure cap design using the Hydrologic Evaluation of Landfill Performance (HELP) model. The revised design substitutes a MicroDrain Liner®—50-mil linear low-density polyethylene geomembrane structurally integrated with 130-mil drainage layer—for the previously planned drainage/barrier system—300-mil geosynthetic drainage layer (GDL), 300-mil geosynthetic clay liner (GCL), and 6-inch common fill soil layer. For a 25-year, 24-hour storm event, HELP model v3.07 was employed to (1) predict the peak maximum daily hydraulic head for the geomembrane layer, and (2) ensure that South Carolina Department of Health and Environmental Control (SCDHEC) requirements for the barrier layer (i.e., ≤ 12 inches hydraulic head on top of a barrier having a saturated hydraulic conductivity ≤ 1.0E-05 cm/s) will not be exceeded. A 25-year, 24-hour storm event at the Savannah River Site (SRS) is 6.1 inches rainfall (Weber 1998). HELP model v3.07 results based upon the new planned cap design suggest that the peak maximum daily hydraulic head on the geomembrane barrier layer will be 0.179 inches for a minimum slope equal to 3%, which is approximately two orders of magnitude below the SCDHEC upper limit of 12 inches.

  10. Lipid changes and their relationship with vitamin D levels in children under 18 years with type 1 diabetes.

    Science.gov (United States)

    Zambrana-Calví, Gabriela D R; Palomo-Atance, Enrique; Gourdet, Marie E; León-Martín, Alberto; Ballester-Herrera, María José; Giralt-Muiña, Patricio

    2016-03-01

    To analyze lipid changes and their relationship with 25-hydroxy vitamin D3 (25-OH-D) levels in patients under 18 years old with type 1 diabetes mellitus (T1DM). A cross-sectional, descriptive study. Patients under 18 years with T1DM were enrolled by consecutive, nonrandomized sampling. Data collected included sex, age, pubertal stage, time since T1DM onset, weight, height, body mass index (BMI), waist circumference, glycosylated hemoglobin (HbA1c), 25-OH-D, total cholesterol (TC), LDL cholesterol (LDL-C), HDL cholesterol (HDL-C), and triglycerides (TG). Results were stratified by sex, age, and pubertal stage. Data were analyzed using SPSS(®). Ninety patients with a mean age of 11.7 ± 3.6 years (51.1% males) and mean HbA1c levels of 7.5 ± 1.3% were enrolled. Of these, 26.6% had 25-OH-D levelsC levelsC levels ≥ 100 mg/dL, and 2.2% had TG levels ≥ 150 mg/dL. Patients with 25-OH-Dc. A correlation was found between 25-OH-D and TG levels (-0.230; P=.029). Patients in our population with vitamin D deficiency had higher TG levels. Long-term follow-up should be performed to understand the potential impact of such levels on diabetes-related complications. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

  11. The Influence of 1α.25-Dihydroxyvitamin D3 Coating on Implant Osseointegration in the Rabbit Tibia

    Directory of Open Access Journals (Sweden)

    Yoshihito

    2014-10-01

    Full Text Available Objectives: This study aims to evaluate bone response to an implant surface modified by 1α,25-dihydroxyvitamin D3 [1.25-(OH2D3] in vivo and the potential link between 1.25-(OH 2D3 surface concentration and bone response. Material and Methods: Twenty-eight implants were divided into 4 groups (1 uncoated control, 3 groups coated with 1.25-(OH2D3 in concentrations of 10-8, 10-7 and 10-6 M respectively, placed in the rabbit tibia for 6 weeks. Topographical analyses were carried out on coated and uncoated discs using interferometer and atomic-force-microscope (AFM. Twenty-eight implants were histologically observed (bone-to-implant-contact [BIC] and new-bone-area [NBA]. Results: The results showed that the 1.25-(OH2D3 coated implants presented a tendency to osseointegrate better than the non-coated surfaces, the differences were not significant (P > 0.05. Conclusions: The effect of 1.25-(OH2D3 coating to implants suggested possible dose dependent effects, however no statistical differences could be found. It is thought that the base substrate topography (turned could not sustain sufficient amount of 1.25-(OH2D3 enough to present significant biologic responses. Thus, development a base substrate that can sustain 1.25-(OH2D3 for a long period is necessary in future studies.

  12. Double valley Dirac fermions for 3D and 2D Hg1-x Cd x Te with strong asymmetry

    Science.gov (United States)

    Marchewka, M.

    2017-04-01

    In this paper the possibility to bring about the double-valley Dirac fermions in some quantum structures is predicted. These quantum structures are: strained 3D Hg1-x Cd x Te topological insulator (TI) with strong interface inversion asymmetry and the asymmetric Hg1-x Cd x Te double quantum wells (DQW). The numerical analysis of the dispersion relation for 3D TI Hg1-x Cd x Te for the proper Cd (x)-content of the Hg1-x Cd x Te compound clearly shows that the inversion symmetry breaking together with the unaxial tensile strain causes the splitting of each of the Dirac nodes (two belonging to two interfaces) into two in the proximity of the Γ-point. Similar effects can be obtained for asymmetric Hg1-x Cd x Te DQW with the proper content of Cd and proper width of the quantum wells. The aim of this work is to explore the inversion symmetry breaking in 3D TI and 2D DQW mixed HgCdTe systems. It is shown that this symmetry breaking leads to the dependence of carriers energy on quasi-momentum similar to that of Weyl fermions.

  13. Interaction of environmental contaminants with zebrafish organic anion transporting polypeptide, Oatp1d1 (Slco1d1)

    Energy Technology Data Exchange (ETDEWEB)

    Popovic, Marta; Zaja, Roko [Laboratory for Molecular Ecotoxicology, Division for Marine and Environmental Research, Rudjer Boskovic Institute, Bijenicka 54, 10 000 Zagreb (Croatia); Fent, Karl [University of Applied Sciences Northwestern Switzerland, School of Life Sciences, Gründenstrasse 40, CH-4132 Muttenz (Switzerland); Swiss Federal Institute of Technology (ETH Zürich), Department of Environmental System Sciences, Institute of Biogeochemistry and Pollution Dynamics, CH-8092 Zürich (Switzerland); Smital, Tvrtko, E-mail: smital@irb.hr [Laboratory for Molecular Ecotoxicology, Division for Marine and Environmental Research, Rudjer Boskovic Institute, Bijenicka 54, 10 000 Zagreb (Croatia)

    2014-10-01

    Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. - Highlights: • We optimized a novel assay for determination of Oatp1d1 interactors • Oatp1d1 is the first SLC characterized fish xenobiotic transporter • PFOS, nonylphenol, diclofenac, EE2, caffeine are high affinity Oatp1d1substrates • PFOA, chlorpyrifos

  14. Interaction of environmental contaminants with zebrafish organic anion transporting polypeptide, Oatp1d1 (Slco1d1)

    International Nuclear Information System (INIS)

    Popovic, Marta; Zaja, Roko; Fent, Karl; Smital, Tvrtko

    2014-01-01

    Polyspecific transporters from the organic anion transporting polypeptide (OATP/Oatp) superfamily mediate the uptake of a wide range of compounds. In zebrafish, Oatp1d1 transports conjugated steroid hormones and cortisol. It is predominantly expressed in the liver, brain and testes. In this study we have characterized the transport of xenobiotics by the zebrafish Oatp1d1 transporter. We developed a novel assay for assessing Oatp1d1 interactors using the fluorescent probe Lucifer yellow and transient transfection in HEK293 cells. Our data showed that numerous environmental contaminants interact with zebrafish Oatp1d1. Oatp1d1 mediated the transport of diclofenac with very high affinity, followed by high affinity towards perfluorooctanesulfonic acid (PFOS), nonylphenol, gemfibrozil and 17α-ethinylestradiol; moderate affinity towards carbaryl, diazinon and caffeine; and low affinity towards metolachlor. Importantly, many environmental chemicals acted as strong inhibitors of Oatp1d1. A strong inhibition of Oatp1d1 transport activity was found by perfluorooctanoic acid (PFOA), chlorpyrifos-methyl, estrone (E1) and 17β-estradiol (E2), followed by moderate to low inhibition by diethyl phthalate, bisphenol A, 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4 tetrahydronapthalene and clofibrate. In this study we identified Oatp1d1 as a first Solute Carrier (SLC) transporter involved in the transport of a wide range of xenobiotics in fish. Considering that Oatps in zebrafish have not been characterized before, our work on zebrafish Oatp1d1 offers important new insights on the understanding of uptake processes of environmental contaminants, and contributes to the better characterization of zebrafish as a model species. - Highlights: • We optimized a novel assay for determination of Oatp1d1 interactors • Oatp1d1 is the first SLC characterized fish xenobiotic transporter • PFOS, nonylphenol, diclofenac, EE2, caffeine are high affinity Oatp1d1substrates • PFOA, chlorpyrifos

  15. From 1D to 3D: A new route to fabricate tridimensional structures via photo-generation of silver networks

    NARCIS (Netherlands)

    Wang, Zhanhua; Shen, Huaizhong; Wu, Yuxin; Fang, Liping; Ye, Shunsheng; Wang, Zhaoyi; Liu, Wendong; Cheng, Zhongkai; Zhang, Junhu; Yang, Bai

    2015-01-01

    A rapid and cost effective method has been developed to fabricate 3 dimensional (3D) ordered structures by photo-generating silver networks inside a 1D layered heterogeneous laminate composed of poly(vinyl alcohol) (PVA) and poly(methyl methacrylate) (PMMA). By designing the photo-mask meticulously,

  16. 3D vector flow imaging

    DEFF Research Database (Denmark)

    Pihl, Michael Johannes

    The main purpose of this PhD project is to develop an ultrasonic method for 3D vector flow imaging. The motivation is to advance the field of velocity estimation in ultrasound, which plays an important role in the clinic. The velocity of blood has components in all three spatial dimensions, yet...... are (vx, vy, vz) = (-0.03, 95, 1.0) ± (9, 6, 1) cm/s compared with the expected (0, 96, 0) cm/s. Afterwards, 3D vector flow images from a cross-sectional plane of the vessel are presented. The out of plane velocities exhibit the expected 2D circular-symmetric parabolic shape. The experimental results...... verify that the 3D TO method estimates the complete 3D velocity vectors, and that the method is suitable for 3D vector flow imaging....

  17. TU-H-CAMPUS-TeP1-05: Fast Processed 3D Printing-Aided Urethane Resin (PUR) Bolus in Radiation Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, B; Chiu, T; Gu, X; Lee, H; Nedzi, L; Jiang, S [UT Southwestern Medical Center, Dallas, TX (United States)

    2016-06-15

    Purpose: 3D printed custom bolus is regularly used in radiation therapy clinic as a compensator. However, usual method of bolus printing with 100% filling is very time-consuming. The purpose of this study is to evaluate the feasibility and benefit of 3D printed bolus filled with UR. Methods: Two boluses were designed on nose (9e electrons) and ear (6× photons) for a head phantom in treatment planning system (TPS) to achieve dose coverage to the skin. The bolus structures (56–167cc) were converted to STereoLithographic (STL) model using an in-house developed algorithm and sent to a commercial fused deposition modeling (FDM) printer. Only shells were printed with polylactic acid (PLA) material. Liquid UR was then placed in a vacuum pump and slowly poured into the hollow bolus from its top opening. Liquid UR hardened in around half an hour. The phantom was rescanned with custom boluses attached and the dosimetry was compared with original design in TPS. Basic CT and dose properties were investigated. GaF films were irradiated to measure dose profile and output of several open photon and electron beams under solid water and UR slabs of same thicknesses. Results: CT number was 11.2±7.3 and 65.4±7.8, respectively for solid water(∼1.04g/cc) and UR(∼1.08g/cc). The output measurement at dmax for 6× was within 2% for the two materials. The relative dose profiles of the two materials above dmax show 94–99% Gamma analysis passing rates for both photons and electrons. Dose distributions with 3D PUR boluses maintained great coverage on the intended skin regions and resembled that with computer generated boluses. Manufacturing 3D PUR boluses was 3–4 times faster than 100% printed boluses. The efficiency significantly improves for larger boluses. Conclusion: The study suggests UR has similar dose responses as solid water. Making custom bolus with UR greatly increases clinical workflow efficiency.

  18. TU-H-CAMPUS-TeP1-05: Fast Processed 3D Printing-Aided Urethane Resin (PUR) Bolus in Radiation Therapy

    International Nuclear Information System (INIS)

    Zhao, B; Chiu, T; Gu, X; Lee, H; Nedzi, L; Jiang, S

    2016-01-01

    Purpose: 3D printed custom bolus is regularly used in radiation therapy clinic as a compensator. However, usual method of bolus printing with 100% filling is very time-consuming. The purpose of this study is to evaluate the feasibility and benefit of 3D printed bolus filled with UR. Methods: Two boluses were designed on nose (9e electrons) and ear (6× photons) for a head phantom in treatment planning system (TPS) to achieve dose coverage to the skin. The bolus structures (56–167cc) were converted to STereoLithographic (STL) model using an in-house developed algorithm and sent to a commercial fused deposition modeling (FDM) printer. Only shells were printed with polylactic acid (PLA) material. Liquid UR was then placed in a vacuum pump and slowly poured into the hollow bolus from its top opening. Liquid UR hardened in around half an hour. The phantom was rescanned with custom boluses attached and the dosimetry was compared with original design in TPS. Basic CT and dose properties were investigated. GaF films were irradiated to measure dose profile and output of several open photon and electron beams under solid water and UR slabs of same thicknesses. Results: CT number was 11.2±7.3 and 65.4±7.8, respectively for solid water(∼1.04g/cc) and UR(∼1.08g/cc). The output measurement at dmax for 6× was within 2% for the two materials. The relative dose profiles of the two materials above dmax show 94–99% Gamma analysis passing rates for both photons and electrons. Dose distributions with 3D PUR boluses maintained great coverage on the intended skin regions and resembled that with computer generated boluses. Manufacturing 3D PUR boluses was 3–4 times faster than 100% printed boluses. The efficiency significantly improves for larger boluses. Conclusion: The study suggests UR has similar dose responses as solid water. Making custom bolus with UR greatly increases clinical workflow efficiency.

  19. Photoaffinity labeling of serum vitamin D binding protein by 3-deoxy-3-azido-25-hydroxyvitamin D3

    International Nuclear Information System (INIS)

    Link, R.P.; Kutner, A.; Schnoes, H.K.; DeLuca, H.F.

    1987-01-01

    3-Deoxy-3-azido-25-hydroxyvitamin D3 was covalently incorporated in the 25-hydroxyvitamin D3 binding site of purified human plasma vitamin D binding protein. Competition experiments showed that 3-deoxy-3-azido-25-hydroxyvitamin D3 and 25-hydroxyvitamin D3 bind at the same site on the protein. Tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was synthesized from tritiated 25-hydroxyvitamin D3, retaining the high specific activity of the parent compound. The tritiated azido label bound reversibly to human vitamin D binding protein in the dark and covalently to human vitamin D binding protein after exposure to ultraviolet light. Reversible binding of tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was compared to tritiated 25-hydroxyvitamin D3 binding to human vitamin D binding protein. Scatchard analysis of the data indicated equivalent maximum density binding sites with a KD,app of 0.21 nM for 25-hydroxyvitamin D3 and a KD,app of 1.3 nM for the azido derivative. Covalent binding was observed only after exposure to ultraviolet irradiation, with an average of 3% of the reversibly bound label becoming covalently bound to vitamin D binding protein. The covalent binding was reduced 70-80% when 25-hydroxyvitamin D3 was present, indicating strong covalent binding at the vitamin D binding site of the protein. When tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was incubated with human plasma in the absence and presence of 25-hydroxyvitamin D3, 12% of the azido derivative was reversibly bound to vitamin D binding protein. After ultraviolet irradiation, four plasma proteins covalently bound the azido label, but vitamin D binding protein was the only protein of the four that was unlabeled in the presence of 25-hydroxyvitamin D3

  20. Double valley Dirac fermions for 3D and 2D Hg$_{1-x}$Cd$_x$Te with strong asymmetry

    OpenAIRE

    Marchewka, M.

    2017-01-01

    In this paper the possibility to bring about the double- valley Dirac fermions in some quantum structures is predicted. These quantum structures are: strained 3D Hg$_{1-x}$Cd$_x$Te topological insulator (TI) with strong interface inversion asymmetry and the asymmetric Hg$_{1-x}$Cd$_x$Te double quantum wells (DQW). The numerical analysis of the dispersion relation for 3D TI Hg$_{1-x}$Cd$_x$Te for the proper Cd ($x$)-content of in the Hg$_{1-x}$Cd$_x$Te-compound clearly show that the inversion ...

  1. [A study on the construction, expression and immunosterility of Lagurus laguru zona pellucida 3 DNA vaccine pVAX1-sig-LTB-lZP3-C3d3].

    Science.gov (United States)

    Li, Chen-Chen; Yu, Ji-Yun; Jiang, Min; Tu, Yi-Xian; Ma, Xiao-Lin; Zhang, Fu-Chun

    2011-09-01

    To enhance the immunocontraceptive effect of Lagurus lagurus zona pellucida 3 DNA vaccine, and to achieve the prospect of application through the pVAX1-sig-LTB-lZP3-C3d3 different immunity pathway. Two adjuvant molecules were constructed into the recombinant plasmid pVAX1-sig-LTB-lZP3-C3d3 as DNA vaccine which contains Escherichia coli heat-labile enterotoxin B subunit and the molecular adjuvant 3 copies of C3d. The results of RT-PCR and western blot showed that the DNA vaccine was expressed in mRNA and protein level. The female C57BL/6 mice were immunized by three ways: intramuscular injection, intranasal or oral route.Antibody levels and types were detected by ELISA. ELISA results showed that recombinant plasmid pVAX1-sig-LTB-lZP3-C3d3 immunization induced specific IgG, IgA levels were significantly different comparing with control (Psig-LTB-lZP3-C3d3 can induce the specific immune response efficiently and enhance the immunocontraceptive effects.

  2. Determination of the best application time of 2,4-D 14C-labelled herbicides and 14C-labelled glyphosate for translocation to the root system of Glycyrrhiza Glabra vegetative growth stage

    International Nuclear Information System (INIS)

    Ahari Mostafavi, H.; Fathollahi, H.; Naserian, B.; Majd, F.; Rahimian, H.; Ghanbari, A.; Minbashi, M.

    2002-01-01

    In this research work, four different growth stages of Glycyrrhiza Glabra were studied separately and under green house conditions, and in all of these stages the plants were treated by labelled herbicides 14 C-2,4-D and 14 C-Glyphosate through the ad axial surface with activity of 0.60μci up to 0.1018 μci (in each 10μLi of solution). The plants were harvested 72 hours after treatment. They were divided into treated leaf, leaves and stem above the treated leaf and leaves and stem below the treated leaf and root. The amount of radio labelled herbicides in each homo genus solution (produced from extraction of herbicides from plants samples) was quantified using liquid scintillation counter. The amount of herbicide mobility and transfer to different parts of Glycyrrhiza Glabra in each growth stage were determined. This study shows that the best application time of 2,4-D for translocation to the root system of the plant is at 6- leaf stage, and 2,4-D indicates more trans loc ability as compared with Glyphosate

  3. An ochre mutation in the vitamin D receptor gene causes hereditary 1,25-dihydroxyvitamin D3-resistant rickets in three families

    International Nuclear Information System (INIS)

    Ritchie, H.H.; Hughes, M.R.; Thompson, E.T.; Pike, J.W.; O'Malley, B.W.; Malloy, P.J.; Feldman, D.; Hochberg, Z.

    1989-01-01

    Hereditary 1,25-dihydroxyvitamin D 3 -resistant rickets is a rare autosomal-recessive disease resulting from target-organ resistance to the action of the active hormonal form of vitamin D. Four affected children from three related families with the classical syndrome of hereditary 1,25-dihydroxyvitamin D 3 -resistant rickets and the absence of detectable binding to the vitamin D receptor (VDR) in cultured fibroblasts or lymphoblasts were examined for genetic abnormalities in the VDR gene. Genomic DNA from Epstein-Barr virus-transformed lymphoblasts of eight family members was isolated and amplified by polymerase chain reaction techniques. Amplified fragments containing the eight structural exons encoding the VDR protein were sequenced. The DNA from all affected children exhibited a single C → A base substitution within exon 7 at nucleotide 970. Although the affected children were all homozygotic for the mutation, the four parents tested all exhibited both wild-type and mutant alleles, indicating a heterozygous state. Recreated mutant receptor exhibited no specific 1,25-[ 3 H]dihydroxyvitamin D 3 binding and failed to activate a cotransfected VDR promoter-reporter gene construct. Thus these findings identify an ochre mutation in a human steroid hormone receptor in patients with hereditary 1,25-dihydroxyvitamin D 3 -resistant rickets

  4. Media development effectiveness of geography 3d muckups

    Science.gov (United States)

    Prasetya, S. P.; Daryono; Budiyanto, E.

    2018-01-01

    Geography examines geosphere phenomena that occurs in a space associated with humans on earth’s surface. Media 3D models are an important visual media in presenting spatial objects on the earth’s surface. This study aims to develop a decent 3D mockups media used for learning materials and test the effectiveness of media geography 3D mockups on learning outcomes. The study involved 90 students of Geography Education, Faculty of Social Sciences and Law, State University of Surabaya. Method development using a model of the Borg and Gall (1989) which has been modified into three stages, namely the introduction, development, and testing. The study produced instructional media 3D Muckups eligible to be used as a learning medium for the material hydrosphere geography, geology, and geomorphology. 3D mockups media use in learning geography materials can increase the activity of students, student interest and a positive response to raise the student learning outcomes as the material can be delivered more concrete geography. Based on observations conducted student activity occurs continuously increase in the use of 3D models for learning geography material.

  5. Comparison of 2D and 3D neural induction methods for the generation of neural progenitor cells from human induced pluripotent stem cells.

    Science.gov (United States)

    Chandrasekaran, Abinaya; Avci, Hasan X; Ochalek, Anna; Rösingh, Lone N; Molnár, Kinga; László, Lajos; Bellák, Tamás; Téglási, Annamária; Pesti, Krisztina; Mike, Arpad; Phanthong, Phetcharat; Bíró, Orsolya; Hall, Vanessa; Kitiyanant, Narisorn; Krause, Karl-Heinz; Kobolák, Julianna; Dinnyés, András

    2017-12-01

    Neural progenitor cells (NPCs) from human induced pluripotent stem cells (hiPSCs) are frequently induced using 3D culture methodologies however, it is unknown whether spheroid-based (3D) neural induction is actually superior to monolayer (2D) neural induction. Our aim was to compare the efficiency of 2D induction with 3D induction method in their ability to generate NPCs, and subsequently neurons and astrocytes. Neural differentiation was analysed at the protein level qualitatively by immunocytochemistry and quantitatively by flow cytometry for NPC (SOX1, PAX6, NESTIN), neuronal (MAP2, TUBB3), cortical layer (TBR1, CUX1) and glial markers (SOX9, GFAP, AQP4). Electron microscopy demonstrated that both methods resulted in morphologically similar neural rosettes. However, quantification of NPCs derived from 3D neural induction exhibited an increase in the number of PAX6/NESTIN double positive cells and the derived neurons exhibited longer neurites. In contrast, 2D neural induction resulted in more SOX1 positive cells. While 2D monolayer induction resulted in slightly less mature neurons, at an early stage of differentiation, the patch clamp analysis failed to reveal any significant differences between the electrophysiological properties between the two induction methods. In conclusion, 3D neural induction increases the yield of PAX6 + /NESTIN + cells and gives rise to neurons with longer neurites, which might be an advantage for the production of forebrain cortical neurons, highlighting the potential of 3D neural induction, independent of iPSCs' genetic background. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  6. Are prostate carcinoma clinical stages T1C and T2 similar?

    Directory of Open Access Journals (Sweden)

    Athanase Billis

    2006-04-01

    Full Text Available PURPOSE: A recent study has found that PSA recurrence rate for clinical T1c tumors is similar to T2 tumors, indicating a need for further refinement of clinical staging system. To test this finding we compared clinicopathologic characteristics and the time to PSA progression following radical retropubic prostatectomy of patients with clinical stage T1c tumors to those with stage T2, T2a or T2b tumors. MATERIALS AND METHODS: From a total of 186 consecutive patients submitted to prostatectomy, 33.52% had clinical stage T1c tumors, 45.45% stage T2a tumors and 21.02% stage T2b tumors. The variables studied were age, preoperative PSA, prostate weight, Gleason score, tumor extent, positive surgical margins, extraprostatic extension (pT3a, seminal vesicle invasion (pT3b, and time to PSA progression. Tumor extent was evaluated by a point-count method. RESULTS: Patients with clinical stage T1c were younger and had the lowest mean preoperative PSA. In the surgical specimen, they had higher frequency of Gleason score < 7 and more organ confined cancer. In 40.54% of the patients with clinical stage T2b tumors, there was extraprostatic extension (pT3a. During the study period, 54 patients (30.68% developed a biochemical progression. Kaplan-Meier product-limit analysis revealed no significant difference in the time to PSA progression between men with clinical stage T1c versus clinical stage T2 (p = 0.7959, T2a (p = 0.6060 or T2b (p = 0.2941 as well as between men with clinical stage T2a versus stage T2b (p = 0.0994. CONCLUSION: Clinicopathological features are not similar considering clinical stage T1c versus clinical stages T2, T2a or T2b.

  7. Relationship between Stage of Chronic Kidney Disease and Sarcopenia in Korean Aged 40 Years and Older Using the Korea National Health and Nutrition Examination Surveys (KNHANES IV-2, 3, and V-1, 2, 2008-2011.

    Directory of Open Access Journals (Sweden)

    Sung Jin Moon

    Full Text Available Protein-energy wasting is common in patients with end-stage kidney disease. However, few studies have examined the relationship between early stages of chronic kidney disease (CKD and sarcopenia.We conducted a cross-sectional study based on data in the Korea National Health and Nutrition Examination Survey, 2008-2011. In total, 11,625 subjects aged 40 years or older who underwent dual-energy X-ray absorptiometry were analyzed. Sarcopenia was defined based on values of appendicular skeletal muscle mass as a percentage of body weight (ASM/Wt two standard deviations below the gender-specific mean for young adults. Estimated glomerular filtration rates (eGFR were calculated using the CKD-EPI equation.Mean age, body mass index (BMI, and HOMA-IR were higher and caloric intake, physical activity, and vitamin D level were lower in the sarcopenia groups in both men and women. As the stage of CKD increased, the prevalence of sarcopenia increased, even in the early stages of CKD (normal and CKD1, 2, and 3-5: 2.6%, 5.6%, and 18.1% in men and 5.3%, 7.1%, and 12.6% in women, respectively; p < 0.001. In addition, a correlation analysis showed that GFR and ASM/Wt had significant correlations in both men and women. Logistic regression analyses, after adjusting for age, BMI, caloric intake, log(physical activity, vitamin D level, and log(HOMA-IR, showed that the odds ratio for sarcopenia with respect to CKD 3-5 was 1.93 (95% CI = 1.02-3.68 in men but was not statistically significant in women.The prevalence of sarcopenia was higher in elderly Korean patients with even mildly reduced kidney function. Stage of CKD was associated with an increased prevalence of sarcopenia in men but not women. Thus, we should evaluate the risk of sarcopenia and work to prevent it, even in patients with early CKD.

  8. 75 FR 71373 - Airworthiness Directives; International Aero Engines V2500-A1, V2522-A5, V2524-A5, V2525-D5...

    Science.gov (United States)

    2010-11-23

    ...] borescope inspections of high-pressure turbine (HPT) stage 1 blade outer air seal segments for evidence of... evidence of distress. This proposed AD would also require incorporation of improved design stage 1 blade... Compliance Criteria Stage 1 blade Stage 1 blade outer air seal outer air seal Exhaust gas segments hours...

  9. Synthesis of 1,4-anhydro-D-fructose and 1,4-anhydro-D-tagatose.

    Science.gov (United States)

    Dekany, Gyula; Lundt, Inge; Steiner, Andreas J; Stütz, Arnold E

    2006-07-24

    1,4-Anhydro-D-fructose and 1,4-anhydro-D-tagatose were prepared from 1,2-O-isopropylidene-D-glucofuranose via the common intermediate 3,5,6-tri-O-benzyl-D-glucitol. The title compounds may be interesting anti-oxidants and feature activities akin to their natural pyranoid counterpart, 1,5-anhydro-D-fructose.

  10. Synthesis of 1,4-anhydro-D-fructose and 1,4-anhydro-D-tagatose

    DEFF Research Database (Denmark)

    Dekany, Gyula; Lundt, Inge; Steiner, Andreas J.

    2006-01-01

    1,4-Anhydro-D-fructose and 1,4-anhydro-D-tagatose were prepared from 1,2-O-isopropylidene-D-glucofuranose via the common intermediate 3,5,6-tri-O-benzyl-D-glucitol. The title compounds may be interesting anti-oxidants and feature activities akin to their natural pyranoid counterpart, 1,5-anhydro-D-fructose....

  11. The effect of miR-338-3p on HBx deletion-mutant (HBx-d382 mediated liver-cell proliferation through CyclinD1 regulation.

    Directory of Open Access Journals (Sweden)

    Xiaoyu Fu

    Full Text Available Hepatitis B Virus (HBV DNA integration and HBV X (HBx deletion mutation occurs in HBV-positive liver cancer patients, and C-terminal deletion in HBx gene mutants are highly associated with hepatocarcinogenesis. Our previous study found that the HBx-d382 deletion mutant (deleted at nt 382-400 can down-regulate miR-338-3p expression in HBx-expressing cells. The aim of the present study is to examine the role of miR-338-3p in the HBx-d382-mediated liver-cell proliferation.We established HBx-expressing LO2 cells by Lipofectamine 2000 transfection. A miR-338-3p mimics or inhibitor was transfected into LO2/HBx-d382 and LO2/HBx cells using miR-NC as a control miRNA. In silico analysis of potential miR-338-3p targets revealed that miR-338-3p could target the cell cycle regulatory protein CyclinD1. To confirm that CyclinD1 is negatively regulated by miR-338-3p, we constructed luciferase reporters with wild-type and mutated CyclinD1-3'UTR target sites for miR-338-3p binding. We examined the CyclinD1 expression by real-time PCR and western blot, and proliferation activity by flow cytometric cell cycle analysis, Edu incorporation, and soft agar colony.HBx-d382 exhibited enhanced proliferation and CyclinD1 expression in LO2 cells. miR-338-3p expression inhibited cell proliferation in LO2/HBx-d382 cells (and LO2/HBx cells, and also negatively regulated CyclinD1 protein expression. Of the two putative miR-338-3p binding sites in the CyclinD1-3'UTR region, the effect of miR-338-3p on the second binding site (nt 2397-2403 was required for the inhibition.miR-338-3p can directly regulate CyclinD1 expression through binding to the CyclinD1-3'UTR region, mainly at nt 2397-2403. Down-regulation of miR-338-3p expression is required for liver cell proliferation in both LO2/HBx and LO2/HBx-d382 mutant cells, although the effect is more pronounced in LO2/HBx-d382 cells. Our study elucidated a novel mechanism, from a new miRNA-regulation perspective, underlying the

  12. High-Throughput Fabrication of Nanocomplexes Using 3D-Printed Micromixers

    DEFF Research Database (Denmark)

    Bohr, Adam; Boetker, Johan; Wang, Yingya

    2017-01-01

    3D printing allows a rapid and inexpensive manufacturing of custom made and prototype devices. Micromixers are used for rapid and controlled production of nanoparticles intended for therapeutic delivery. In this study, we demonstrate the fabrication of micromixers using computational design and 3D...... via bulk mixing. Moreover, each micromixer could process more than 2 liters per hour with unaffected performance and the setup could easily be scaled-up by aligning several micromixers in parallel. This demonstrates that 3D printing can be used to prepare disposable high-throughput micromixers...... printing, which enable a continuous and industrial scale production of nanocomplexes formed by electrostatic complexation, using the polymers poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate). Several parameters including polymer concentration, flow rate, and flow ratio were...

  13. CMAQv5.1 with new dust AQS Hourly site compare files

    Data.gov (United States)

    U.S. Environmental Protection Agency — CMAQv5.1 with a new dust module AQS Hourly sitex files containing hourly paired model/ob data for the AQS network. This dataset is associated with the following...

  14. Micellar casein concentrate production with a 3X, 3-stage, uniform transmembrane pressure ceramic membrane process at 50°C.

    Science.gov (United States)

    Hurt, E; Zulewska, J; Newbold, M; Barbano, D M

    2010-12-01

    The production of serum protein (SP) and micellar casein from skim milk can be accomplished using microfiltration (MF). Potential commercial applications exist for both SP and micellar casein. Our research objective was to determine the total SP removal and SP removal for each stage, and the composition of retentates and permeates, for a 3×, continuous bleed-and-feed, 3-stage, uniform transmembrane pressure (UTP) system with 0.1-μm ceramic membranes, when processing pasteurized skim milk at 50°C with 2 stages of water diafiltration. For each of 4 replicates, about 1,100 kg of skim milk was pasteurized (72°C, 16s) and processed at 3× through the UTP MF system. Retentate from stage 1 was cooled to <4°C and stored until the next processing day, when it was diluted with reverse osmosis water back to a 1× concentration and again processed through the MF system (stage 2) to a 3× concentration. The retentate from stage 2 was stored at <4°C, and, on the next processing day, was diluted with reverse osmosis water back to a 1× concentration, before running through the MF system at 3× for a total of 3 stages. The retentate and permeate from each stage were analyzed for total nitrogen, noncasein nitrogen, and nonprotein nitrogen using Kjeldahl methods; sodium dodecyl sulfate-PAGE analysis was also performed on the retentates from each stage. Theoretically, a 3-stage, 3× MF process could remove 97% of the SP from skim milk, with a cumulative SP removal of 68 and 90% after the first and second stages, respectively. The cumulative SP removal using a 3-stage, 3× MF process with a UTP system with 0.01-μm ceramic membranes in this experiment was 64.8 ± 0.8, 87.8 ± 1.6, and 98.3 ± 2.3% for the first, second, and third stages, respectively, when calculated using the mass of SP removed in the permeate of each stage. Various methods of calculation of SP removal were evaluated. Given the analytical limitations in the various methods for measuring SP removal, calculation

  15. The effects of MRI on mouse embryos during fetal stage

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Takashi; Sakazaki, Takahiko; Itokawa, Yuka [Suzuka University of Medical Science, Koriyama (Japan)] (and others)

    2006-06-15

    The effects of Magnetic Resonance Imaging (MRI) on mouse embryos at the early stage of organogenesis were investigated. Pregnant ICR mice were exposed on day 8 of gestation to MRI at 0.5 T for 0.5 hour to 3 hours. The mortality rates of embryos or fetuses, the incidence of external malformations, fetal body weight and sex ratio were observed at day 18 of gestation. A significant increase in embryonic mortality was observed after exposure to either 0.5 T MRI for 0.5 hour or 2 hours. However, the exposure to MRI for 1 hour or 3 hours did not induce any significant increase in embryonic mortality when compared with control. External malformations such as exencephaly, cleft palate and anomalies of tail were observed in all experimental groups exposed to each MRI. A statistically significant increase of external malformations was observed in all groups treated with 0.5 T MRI for 0.5 hour and 3 hours. The incidence of external malformations in the mice group exposed to 0.5 T MRI for 0.5-hour was found to be higher than those of mice group exposed to 0.5 T MRI for 2 hours. The effects of MRI on the external malformations might not to be dose-dependent. There was no statistically significant difference in fetal body weight and sex ratio among each MRI exposure groups.

  16. Relative effectiveness of oral 25-hydroxyvitamin D3 and vitamin D3 in raising wintertime serum 25-hydroxyvitamin D in older adults.

    Science.gov (United States)

    Cashman, Kevin D; Seamans, Kelly M; Lucey, Alice J; Stöcklin, Elisabeth; Weber, Peter; Kiely, Mairead; Hill, Tom R

    2012-06-01

    The relative potency of 25-hydroxyvitamin D3 to vitamin D3 needs to be better defined so that food-composition tables can better reflect the true vitamin D nutritive value of certain foods. We performed a randomized, controlled intervention study in apparently healthy, free-living adults to investigate whether the intake of 25-hydroxyvitamin D3 is 5 times more potent in raising serum 25-hydroxyvitamin D [25(OH)D] during winter compared with an equivalent amount of vitamin D3. A randomized, placebo-controlled, double-blind intervention study was conducted in adults aged ≥50 y (n = 56) who consumed a placebo, 20 μg vitamin D3, or 7 or 20 μg 25-hydroxyvitamin D3 daily throughout 10 wk of winter. Serum 25(OH)D was measured by using an enzyme-linked immunoassay, and serum albumin-corrected calcium (S-Ca) was assessed colorimetrically at the baseline, midpoint, and endpoint of the study. The mean (±SD) increases (per microgram of vitamin D compound) in serum 25(OH)D concentrations over baseline after 10 wk of supplementation were 0.96 ± 0.62, 4.02 ± 1.27, and 4.77 ± 1.04 nmol · L(-1) · μg intake(-1) for the 20-μg vitamin D3/d and 7- and 20-μg 25-hydroxyvitamin D3/d groups, respectively. A comparison of the 7- and 20-μg 25-hydroxyvitamin D3/d groups with the 20-μg vitamin D3/d group yielded conversion factors of 4.2 and 5, respectively. There was no effect of treatment on S-Ca concentrations and no incidence of hypercalcemia (S-Ca >2.6 nmol/L). Each microgram of orally consumed 25-hydroxyvitamin D3 was about 5 times more effective in raising serum 25(OH)D in older adults in winter than an equivalent amount of vitamin D3. This conversion factor could be used in food-compositional tables for relevant foods. This study was registered at clinicaltrials.gov as NCT01398202.

  17. Acute dimethyl sulfoxide therapy in brain edema. Part 3: effect of a 3-hour infusion.

    Science.gov (United States)

    Del Bigio, M; James, H E; Camp, P E; Werner, R; Marshall, L F; Tung, H

    1982-01-01

    Albino rabbits with experimental brain edema produced by a combined cryogenic left hemisphere lesion and metabolic 6-aminonicotinamide lesion were administered a 3-hour intravenous infusion of dimethyl sulfoxide (DMSO). Simultaneous recording of intracranial pressure (ICP), systolic arterial pressure (SAP), and central venous pressure (CVP) and electroencephalography were performed while the animals were being ventilated mechanically to produce a constant Pa CO2 value (38-42 torr). At the end of the infusion, the brain water and electrolyte contents were measured. There was a persistent and progressive reduction of ICP during the infusion, the nadir occurring at 3 hours (p less than 0.005 from zero time), with no change in SAP or CVP. There was a reduction of brain water in both hemispheres when compared to untreated controls, but this was significant for the right hemisphere only (p less than 0.005). There was a significant reduction of the brain sodium content for both hemispheres, but no significant change occurred in brain potassium content. The DMSO infusion was effective not only in reducing ICP, but also in sustaining this reduction for 3 hours.

  18. Stereolithographic hydrogel printing of 3D microfluidic cell culture chips

    DEFF Research Database (Denmark)

    Zhang, Rujing

    that support the required freedom in design, detail and chemistry for fabricating truly 3D constructs have remained limited. Here, we report a stereolithographic high-resolution 3D printing technique utilizing poly(ethylene glycol) diacrylate (PEGDA, MW 700) to manufacture diffusion-open and mechanically...... and material flexibility by embedding a highly compliant cell-laden gelatin hydrogel within the confines of a 3D printed resilient PEGDA hydrogel chip of intermediate compliance. Overall, our proposed strategy represents an automated, cost-effective and high resolution technique to manufacture complex 3D...... epoxy component as structural supports interfacing the external world as well as compliant PEGDA component as microfluidic channels have been manufactured and perfused. Although still in the preliminary stage, this dual-material printing approach shows the potential for constructing complex 3D...

  19. TRPV6 determines the effect of vitamin D3 on prostate cancer cell growth.

    Directory of Open Access Journals (Sweden)

    V'yacheslav Lehen'kyi

    Full Text Available Despite remarkable advances in the therapy and prevention of prostate cancer it is still the second cause of death from cancer in industrialized countries. Many therapies initially shown to be beneficial for the patients were abandoned due to the high drug resistance and the evolution rate of the tumors. One of the prospective therapeutical agents even used in the first stage clinical trials, 1,25-dihydroxyvitamin D3, was shown to be either unpredictable or inefficient in many cases. We have already shown that TRPV6 calcium channel, which is the direct target of 1,25-dihydroxyvitamin D3 receptor, positively controls prostate cancer proliferation and apoptosis resistance (Lehen'kyi et al., Oncogene, 2007. However, how the known 1,25-dihydroxyvitamin D3 antiproliferative effects may be compatible with the upregulation of pro-oncogenic TRPV6 channel remains a mystery. Here we demonstrate that in low steroid conditions 1,25-dihydroxyvitamin D3 upregulates the expression of TRPV6, enhances the proliferation by increasing the number of cells entering into S-phase. We show that these pro-proliferative effects of 1,25-dihydroxyvitamin D3 are directly mediated via the overexpression of TRPV6 channel which increases calcium uptake into LNCaP cells. The apoptosis resistance of androgen-dependent LNCaP cells conferred by TRPV6 channel is drastically inversed when 1,25-dihydroxyvitamin D3 effects were combined with the successful TRPV6 knockdown. In addition, the use of androgen-deficient DU-145 and androgen-insensitive LNCaP C4-2 cell lines allowed to suggest that the ability of 1,25-dihydroxyvitamin D3 to induce the expression of TRPV6 channel is a crucial determinant of the success or failure of 1,25-dihydroxyvitamin D3-based therapies.

  20. PHISICS/RELAP5-3D Adaptive Time-Step Method Demonstrated for the HTTR LOFC#1 Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Robin Ivey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Balestra, Paolo [Univ. of Rome (Italy); Strydom, Gerhard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-05-01

    A collaborative effort between Japan Atomic Energy Agency (JAEA) and Idaho National Laboratory (INL) as part of the Civil Nuclear Energy Working Group is underway to model the high temperature engineering test reactor (HTTR) loss of forced cooling (LOFC) transient that was performed in December 2010. The coupled version of RELAP5-3D, a thermal fluids code, and PHISICS, a neutronics code, were used to model the transient. The focus of this report is to summarize the changes made to the PHISICS-RELAP5-3D code for implementing an adaptive time step methodology into the code for the first time, and to test it using the full HTTR PHISICS/RELAP5-3D model developed by JAEA and INL and the LOFC simulation. Various adaptive schemes are available based on flux or power convergence criteria that allow significantly larger time steps to be taken by the neutronics module. The report includes a description of the HTTR and the associated PHISICS/RELAP5-3D model test results as well as the University of Rome sub-contractor report documenting the adaptive time step theory and methodology implemented in PHISICS/RELAP5-3D. Two versions of the HTTR model were tested using 8 and 26 energy groups. It was found that most of the new adaptive methods lead to significant improvements in the LOFC simulation time required without significant accuracy penalties in the prediction of the fission power and the fuel temperature. In the best performing 8 group model scenarios, a LOFC simulation of 20 hours could be completed in real-time, or even less than real-time, compared with the previous version of the code that completed the same transient 3-8 times slower than real-time. A few of the user choice combinations between the methodologies available and the tolerance settings did however result in unacceptably high errors or insignificant gains in simulation time. The study is concluded with recommendations on which methods to use for this HTTR model. An important caveat is that these findings

  1. Reliability Omnipotent Analysis For First Stage Separator On The Separation Process Of Gas, Oil And Water

    International Nuclear Information System (INIS)

    Sony Tjahyani, D. T.; Ismu W, Puradwi; Asmara Santa, Sigit

    2001-01-01

    Reliability of industry can be evaluated based on two aspects which are risk and economic aspects. From these points, optimation value can be determined optimation value. Risk of the oil refinery process are fire and explosion, so assessment of this system must be done. One system of the oil refinery process is first stage separator which is used to separate gas, oil and water. Evaluation of reliability for first stage separator system has been done with FAMECA and HAZap method. The analysis results, the probability of fire and explosion of 1.1x10 - 2 3 /hour and 1.2x10 - 1 1 /hour, respectively. The reliability value of the system is high because each undesired event is anticipated with safety system or safety component

  2. Comparison of 2-D and 3-D estimates of placental volume in early pregnancy.

    Science.gov (United States)

    Aye, Christina Y L; Stevenson, Gordon N; Impey, Lawrence; Collins, Sally L

    2015-03-01

    Ultrasound estimation of placental volume (PlaV) between 11 and 13 wk has been proposed as part of a screening test for small-for-gestational-age babies. A semi-automated 3-D technique, validated against the gold standard of manual delineation, has been found at this stage of gestation to predict small-for-gestational-age at term. Recently, when used in the third trimester, an estimate obtained using a 2-D technique was found to correlate with placental weight at delivery. Given its greater simplicity, the 2-D technique might be more useful as part of an early screening test. We investigated if the two techniques produced similar results when used in the first trimester. The correlation between PlaV values calculated by the two different techniques was assessed in 139 first-trimester placentas. The agreement on PlaV and derived "standardized placental volume," a dimensionless index correcting for gestational age, was explored with the Mann-Whitney test and Bland-Altman plots. Placentas were categorized into five different shape subtypes, and a subgroup analysis was performed. Agreement was poor for both PlaV and standardized PlaV (p < 0.001 and p < 0.001), with the 2-D technique yielding larger estimates for both indices compared with the 3-D method. The mean difference in standardized PlaV values between the two methods was 0.007 (95% confidence interval: 0.006-0.009). The best agreement was found for regular rectangle-shaped placentas (p = 0.438 and p = 0.408). The poor correlation between the 2-D and 3-D techniques may result from the heterogeneity of placental morphology at this stage of gestation. In early gestation, the simpler 2-D estimates of PlaV do not correlate strongly with those obtained with the validated 3-D technique. Copyright © 2015 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  3. Simultaneous 3D–2D image registration and C-arm calibration: Application to endovascular image-guided interventions

    Energy Technology Data Exchange (ETDEWEB)

    Mitrović, Uroš [Faculty of Electrical Engineering, University of Ljubljana, Tržaška 25, Ljubljana 1000, Slovenia and Cosylab, Control System Laboratory, Teslova ulica 30, Ljubljana 1000 (Slovenia); Pernuš, Franjo [Faculty of Electrical Engineering, University of Ljubljana, Tržaška 25, Ljubljana 1000 (Slovenia); Likar, Boštjan; Špiclin, Žiga, E-mail: ziga.spiclin@fe.uni-lj.si [Faculty of Electrical Engineering, University of Ljubljana, Tržaška 25, Ljubljana 1000, Slovenia and Sensum, Computer Vision Systems, Tehnološki Park 21, Ljubljana 1000 (Slovenia)

    2015-11-15

    Purpose: Three-dimensional to two-dimensional (3D–2D) image registration is a key to fusion and simultaneous visualization of valuable information contained in 3D pre-interventional and 2D intra-interventional images with the final goal of image guidance of a procedure. In this paper, the authors focus on 3D–2D image registration within the context of intracranial endovascular image-guided interventions (EIGIs), where the 3D and 2D images are generally acquired with the same C-arm system. The accuracy and robustness of any 3D–2D registration method, to be used in a clinical setting, is influenced by (1) the method itself, (2) uncertainty of initial pose of the 3D image from which registration starts, (3) uncertainty of C-arm’s geometry and pose, and (4) the number of 2D intra-interventional images used for registration, which is generally one and at most two. The study of these influences requires rigorous and objective validation of any 3D–2D registration method against a highly accurate reference or “gold standard” registration, performed on clinical image datasets acquired in the context of the intervention. Methods: The registration process is split into two sequential, i.e., initial and final, registration stages. The initial stage is either machine-based or template matching. The latter aims to reduce possibly large in-plane translation errors by matching a projection of the 3D vessel model and 2D image. In the final registration stage, four state-of-the-art intrinsic image-based 3D–2D registration methods, which involve simultaneous refinement of rigid-body and C-arm parameters, are evaluated. For objective validation, the authors acquired an image database of 15 patients undergoing cerebral EIGI, for which accurate gold standard registrations were established by fiducial marker coregistration. Results: Based on target registration error, the obtained success rates of 3D to a single 2D image registration after initial machine-based and

  4. Measurement of inclusive triple differential dijet cross section, d3σ/dETdη1dη2 in p bar p collisions at √s = 1.8 TeV

    International Nuclear Information System (INIS)

    Abachi, S.

    1995-07-01

    Measurement of the inclusive triple differential dijet cross section, d 3 σ/dE T d η1 d η2 , at a center of mass energy √s = 1.8 TeV with the D0 detector during the 1992--1993 run. The sensitivity of this measurement to different parton distribution functions is explored. A comparison of the data to NLO theory using different parton distributions functions indicates the need for a smaller gluon content in the x range accessible at the Tevatron than is predicted by current parton distribution sets

  5. 1D and 3D Polymeric Manganese(II) Thiolato Complexes: Synthesis, Structure, and Properties of    ∞3[Mn4(SPh)8] and ∞1[Mn(SMes)2].

    Science.gov (United States)

    Eichhöfer, Andreas; Lebedkin, Sergei

    2018-01-16

    Reactions of [Mn{N(SiMe 3 ) 2 } 2 ] 2 with 2.1 equiv of RSH, R = Ph or Mes = C 6 H 2 -2,4,6-(CH 3 ) 3 , yield compounds of the formal composition "Mn(SR) 2 ". Single-crystal X-ray diffraction reveals that ∞ 1 [Mn(SMes) 2 ] forms one-dimensional chains in the crystal via μ 2 -SMes bridges, whereas ∞ 3 [Mn 4 (SPh) 8 ] comprises a three-dimensional network in which adamantanoid cages composed of four Mn atoms and six μ 2 -bridging SPh ligands are connected in three dimensions by doubly bridging SPh ligands. Thermogravimetric analysis and powder diffractometry indicate an reversible uptake of solvent molecules (tetrahydrofuran) into the channels of ∞ 1 [Mn(SMes) 2 ]. Magnetic measurements reveal antiferromagnetic coupling for both compounds with J = -8.2 cm -1 ( ∞ 1 [Mn(SMes) 2 ]) and -10.0 cm -1 ( ∞ 3 [Mn 4 (SPh) 8 ]), respectively. Their optical absorption and photoluminescence (PL) excitation spectra display characteristic d-d bands of Mn 2+ ions in the visible spectral region. Both compounds emit bright phosphorescence at ∼800 nm at low temperatures (SMes) 2 ] retains a moderately intense emission at ambient temperature (with a quantum yield of 1.2%). Similar PL properties are also found for the related selenolate complexes ∞ 1 [Mn(SeR) 2 ] (R = Ph, Mes).

  6. 1α,25(OH)2D3 differentially regulates miRNA expression in human bladder cancer cells.

    Science.gov (United States)

    Ma, Yingyu; Hu, Qiang; Luo, Wei; Pratt, Rachel N; Glenn, Sean T; Liu, Song; Trump, Donald L; Johnson, Candace S

    2015-04-01

    Bladder cancer is the fourth most commonly diagnosed cancer in men and eighth leading cause of cancer-related death in the US. Epidemiological and experimental studies strongly suggest a role for 1α,25(OH)2D3 in cancer prevention and treatment. The antitumor activities of 1α,25(OH)2D3 are mediated by the induction of cell cycle arrest, apoptosis, differentiation and the inhibition of angiogenesis and metastasis. miRNAs play important regulatory roles in cancer development and progression. However, the role of 1α,25(OH)2D3 in the regulation of miRNA expression and the potential impact in bladder cancer has not been investigated. Therefore, we studied 1α,25(OH)2D3-regulated miRNA expression profiles in human bladder cancer cell line 253J and the highly tumorigenic and metastatic derivative line 253J-BV by miRNA qPCR panels. 253J and 253J-BV cells express endogenous vitamin D receptor (VDR), which can be further induced by 1α,25(OH)2D3. VDR target gene 24-hydroxylase was induced by 1α,25(OH)2D3 in both cell lines, indicating functional 1α,25(OH)2D3 signaling. The miRNA qPCR panel assay results showed that 253J and 253J-BV cells have distinct miRNA expression profiles. Further, 1α,25(OH)2D3 differentially regulated miRNA expression profiles in 253J and 253J-BV cells in a dynamic manner. Pathway analysis of the miRNA target genes revealed distinct patterns of contribution to the molecular functions and biological processes in the two cell lines. In conclusion, 1α,25(OH)2D3 differentially regulates the expression of miRNAs, which may contribute to distinct biological functions, in human bladder 253J and 253J-BV cells. This article is part of a Special Issue entitled '17th Vitamin D Workshop'. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. 3D-PRINTING OF BUILD OBJECTS

    Directory of Open Access Journals (Sweden)

    SAVYTSKYI M. V.

    2016-03-01

    Full Text Available Raising of problem. Today, in all spheres of our life we can constate the permanent search for new, modern methods and technologies that meet the principles of sustainable development. New approaches need to be, on the one hand more effective in terms of conservation of exhaustible resources of our planet, have minimal impact on the environment and on the other hand to ensure a higher quality of the final product. Construction is not exception. One of the new promising technology is the technology of 3D -printing of individual structures and buildings in general. 3Dprinting - is the process of real object recreating on the model of 3D. Unlike conventional printer which prints information on a sheet of paper, 3D-printer allows you to display three-dimensional information, i.e. creates certain physical objects. Currently, 3D-printer finds its application in many areas of production: machine building elements, a variety of layouts, interior elements, various items. But due to the fact that this technology is fairly new, it requires the creation of detailed and accurate technologies, efficient equipment and materials, and development of common vocabulary and regulatory framework in this field. Research Aim. The analysis of existing methods of creating physical objects using 3D-printing and the improvement of technology and equipment for the printing of buildings and structures. Conclusion. 3D-printers building is a new generation of equipment for the construction of buildings, structures, and structural elements. A variety of building printing technics opens up wide range of opportunities in the construction industry. At this stage, printers design allows to create low-rise buildings of different configurations with different mortars. The scientific novelty of this work is to develop proposals to improve the thermal insulation properties of constructed 3D-printing objects and technological equipment. The list of key terms and notions of construction

  8. Synthesis of 3-aminopropyl glycosides of linear β-(13)-D-glucooligosaccharides.

    Science.gov (United States)

    Yashunsky, Dmitry V; Tsvetkov, Yury E; Grachev, Alexey A; Chizhov, Alexander O; Nifantiev, Nikolay E

    2016-01-01

    3-Aminopropyl glycosides of a series of linear β-(13)-linked D-glucooligosaccharides containing from 3 to 13 monosaccharide units were efficiently prepared. The synthetic scheme featured highly regioselective glycosylation of 4,6-O-benzylidene-protected 2,3-diol glycosyl acceptors with a disaccharide thioglycoside donor bearing chloroacetyl groups at O-2' and -3' as a temporary protection of the diol system. Iteration of the deprotection and glycosylation steps afforded the series of the title oligoglucosides differing in length by two monosaccharide units. A novel procedure for selective removal of acetyl groups in the presence of benzoyl ones consisting in a brief treatment with a large excess of hydrazine hydrate has been proposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. 3D bioprinting for engineering complex tissues.

    Science.gov (United States)

    Mandrycky, Christian; Wang, Zongjie; Kim, Keekyoung; Kim, Deok-Ho

    2016-01-01

    Bioprinting is a 3D fabrication technology used to precisely dispense cell-laden biomaterials for the construction of complex 3D functional living tissues or artificial organs. While still in its early stages, bioprinting strategies have demonstrated their potential use in regenerative medicine to generate a variety of transplantable tissues, including skin, cartilage, and bone. However, current bioprinting approaches still have technical challenges in terms of high-resolution cell deposition, controlled cell distributions, vascularization, and innervation within complex 3D tissues. While no one-size-fits-all approach to bioprinting has emerged, it remains an on-demand, versatile fabrication technique that may address the growing organ shortage as well as provide a high-throughput method for cell patterning at the micrometer scale for broad biomedical engineering applications. In this review, we introduce the basic principles, materials, integration strategies and applications of bioprinting. We also discuss the recent developments, current challenges and future prospects of 3D bioprinting for engineering complex tissues. Combined with recent advances in human pluripotent stem cell technologies, 3D-bioprinted tissue models could serve as an enabling platform for high-throughput predictive drug screening and more effective regenerative therapies. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. Comparison of lipid and calorie loss from donor human milk among 3 methods of simulated gavage feeding: one-hour, 2-hour, and intermittent gravity feedings.

    Science.gov (United States)

    Brooks, Christine; Vickers, Amy Manning; Aryal, Subhash

    2013-04-01

    The objective of this study was to compare the differences in lipid loss from 24 samples of banked donor human milk (DHM) among 3 feeding methods: DHM given by syringe pump over 1 hour, 2 hours, and by bolus/gravity gavage. Comparative, descriptive. There were no human subjects. Twenty-four samples of 8 oz of DHM were divided into four 60-mL aliquots. Timed feedings were given by Medfusion 2001 syringe pumps with syringes connected to narrow-lumened extension sets designed for enteral feedings and connected to standard silastic enteral feeding tubes. Gravity feedings were given using the identical syringes connected to the same silastic feeding tubes. All aliquots were analyzed with the York Dairy Analyzer. Univariate repeated-measures analyses of variance were used for the omnibus testing for overall differences between the feeding methods. Lipid content expressed as grams per deciliter at the end of each feeding method was compared with the prefed control samples using the Dunnett's test. The Tukey correction was used for other pairwise multiple comparisons. The univariate repeated-measures analysis of variance conducted to test for overall differences between feeding methods showed a significant difference between the methods (F = 58.57, df = 3, 69, P gravity feeding methods (P = .3296). Pairwise comparison using the Tukey correction revealed a significant difference between both gravity and 1-hour feeding methods (P gravity and 2-hour feeding method (P gravity feedings, the timed feedings resulted in a statistically significant loss of fat as compared with their controls. These findings should raise questions about how those infants in the neonatal intensive care unit are routinely gavage fed.

  11. Antiproliferative activity of amino substituted benzo[b]thieno[2,3-b]pyrido[1,2-a]benzimidazoles explored by 2D and 3D cell culture system.

    Science.gov (United States)

    Perin, Nataša; Bobanović, Kristina; Zlatar, Ivo; Jelić, Dubravko; Kelava, Vanja; Koštrun, Sanja; Marković, Vesna Gabelica; Brajša, Karmen; Hranjec, Marijana

    2017-01-05

    Benzimidazo[1,2-a]quinolines and benzo[b]thieno[2,3-b]pyrido[1,2-a]benzimidazoles with amino chains on the different positions have been evaluated by 2D and 3D assays on the human breast cancer cells. Pentacyclic derivatives were synthesized by microwave assisted amination to study the influence of the thiophene substructure on antitumor activity in comparison to tetracyclic analogues. The results obtained from 2D assay reveals that the antitumor activity is strongly dependent on the nature and position of amino chains. Tetracyclic derivatives displayed selective activity on SK-BR-3 with the 2-amino substituted derivatives as the most active ones while pentacyclic derivatives 6-16 and 21-25 showed more pronounced activity on T-47D. The evaluation of antitumor activity in the 3D assay pointed out that some of the tetracyclic and pentacyclic amino substituted derivatives showed selective activity on the MDA-MB-231 cell line. Influence of physico-chemical properties of the compounds on antiproliferative activity have been investigated by multivariate statistical methods. As a measure of lipophilicity, experimental Chrom LogD values have been determined and number of structural parameters have been calculated for investigated compounds. Main factors contributing to the antiproliferative effect for both 2D and 3D cell cultures are found to be basicity, lipophilicity, molecular weight and number of H-bond donors. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  12. Tissue content of vitamin D3 and 25-hydroxy vitamin D3 in minipigs after cutaneous synthesis, supplementation and deprivation of vitamin D3

    DEFF Research Database (Denmark)

    Burild, Anders; Frandsen, Henrik Lauritz; Poulsen, Morten

    2015-01-01

    storages of vitamin D3 two studies were carried out in Göttingen minipigs. In study 1 one group of minipigs (n=2) was daily exposed to UV light corresponding to 10–20min of midday sun and another group (n=2) of pigs were fed up to 60μg vitamin D3/day corresponding to 3.7–4.4μg/kg body weight.Study 1......-hydroxy vitamin D3 in serum and skin- and subcutaneous adipose tissue biopsies were repeatedly monitored. Vitamin D3 and 25-hydroxy vitamin D3 were eliminated from the skin and the adipose tissue after UV-exposure was ceased. Supplementation of 13C-vitamin D3 did not seem to affect the decline...... demonstrated that daily UV-exposure of minipigs stimulated the cutaneous synthesis of vitamin D3 and resulted in increasing serum vitamin D3 and 25-hydroxy vitamin D3, but also carcasses containing vitamin D3 and 25-hydroxy vitamin D3. The vitamin D3 content in adipose tissue from the UV-exposed minipigs...

  13. Duration of works, flight hours, and blood pressure related to noise-induced hearing loss among Indonesian Air Force helicopter pilots

    Directory of Open Access Journals (Sweden)

    Kholidah Hanum

    2006-09-01

    Full Text Available Helicopter pilots exposed to high intensity noise and other risk factors had increased risk to be noise-induced hearing loss (NIHL. Therefore, it is beneficial to study several risk factors related to NIHL. This study was a nested case-control. Data was extracted from available medical records among helicopter pilots who performed routine aerophysiology training indoctrination (ILA during 1980 through March 2004 at Saryanto Institute for Aviation and Aerospace Medicine (Lakespra, Jakarta. Case was those who had audiogram with a notch of 40 dB or more and of 4000 Hertz on one site or bilateral ears. A case was matched by two controls who free from NIHL up to 2004. All risk factors for cases and controls were counted as of reference date of cases diagnosed. There were 187 medical records available for this study. A number of 32 cases and 64 controls were identified. The final model reveals that NIHL was related to total duration of works, flight hours, and blood pressure. Those who had 500 hours or more than less 500 hours had a moderate increased risk for 2.5 to be NIHL [Adjusted odds ratio (ORa= 2.50; 95% confidence intervals (CI = 0.66-9.29; p = 0.180]. Those who had total duration works 11-24 years had a moderate increased to be NIHL for 2.7 times (ORa = 2.71; 95% CI=0.90-8.10; p = 0.075. Furthermore, prehypertension and hypertension stage 1 subjects than normal blood pressure had moderate trend increased risk to be NIHL. In conclusion total flight hours for 500 hours or more, total duration works 11-24 years, or prehypertension and hypertension stage 1 increased risk NIHL. (Med J Indones 2006; 15:185-90 Keywords: noise induced hearing loss, flight hours, working duration, blood pressure

  14. The Use of 1α,25-Dihydroxyvitamin D3 as an Anticancer Agent

    Directory of Open Access Journals (Sweden)

    Ewa Marcinkowska

    2016-05-01

    Full Text Available The notion that vitamin D can influence the incidence of cancer arose from epidemiological studies. The major source of vitamin D in the organism is skin production upon exposure to ultra violet-B. The very first observation of an inverse correlation between exposure of individuals to the sun and the likelihood of cancer was reported as early as 1941. In 1980, Garland and Garland hypothesised, from findings from epidemiological studies of patients in the US with colon cancer, that vitamin D produced in response to sun exposure is protective against cancer as opposed to sunlight per se. Later studies revealed inverse correlations between sun exposure and the occurrence of prostate and breast cancers. These observations prompted laboratory investigation of whether or not vitamin D had an effect on cancer cells. Vitamin D is not active against cancer cells, but the most active metabolite 1α,25-dihydroxyvitamin D3 (1,25D has profound biological effects. Here, we review the anticancer action of 1,25D, clinical trials of 1,25D to date and the prospects of the future therapeutic use of new and low calcaemic analogues.

  15. 2D-Driven 3D Object Detection in RGB-D Images

    KAUST Repository

    Lahoud, Jean

    2017-12-25

    In this paper, we present a technique that places 3D bounding boxes around objects in an RGB-D scene. Our approach makes best use of the 2D information to quickly reduce the search space in 3D, benefiting from state-of-the-art 2D object detection techniques. We then use the 3D information to orient, place, and score bounding boxes around objects. We independently estimate the orientation for every object, using previous techniques that utilize normal information. Object locations and sizes in 3D are learned using a multilayer perceptron (MLP). In the final step, we refine our detections based on object class relations within a scene. When compared to state-of-the-art detection methods that operate almost entirely in the sparse 3D domain, extensive experiments on the well-known SUN RGB-D dataset [29] show that our proposed method is much faster (4.1s per image) in detecting 3D objects in RGB-D images and performs better (3 mAP higher) than the state-of-the-art method that is 4.7 times slower and comparably to the method that is two orders of magnitude slower. This work hints at the idea that 2D-driven object detection in 3D should be further explored, especially in cases where the 3D input is sparse.

  16. The 3d84s and 3d84d configurations of the fourth spectrum of zinc: Zn IV

    International Nuclear Information System (INIS)

    Joshi, Y.N.; Van Kleef, T.A.M.

    1987-01-01

    The spectrum of zinc was photographed in the region 2000 A - 820 A on a 6.65 m and a 10.7 m normal incidence spectrograph using a sliding spark and a triggered spark source. The new measurements have helped us to confirm the earlier analysis of the 3d 8 4s-3d 8 4p transitions and locate the missing level 3d 8 4s 2 S 1/2 , and study the 3d 8 4p-3d 8 4d transitions. 59 out of 67 levels of the 3d 8 4d configuration have been established. Parametric least-squares-fitted calculations support the analysis. Two hundred and eight (208) additional lines have been classified in the Zn IV analysis. (orig.)

  17. Effect of Aflatoxin B1 on Growth of Bovine Mammary Epithelial Cells in 3D and Monolayer Culture System

    Directory of Open Access Journals (Sweden)

    Babak Qasemi-Panahi

    2013-02-01

    Full Text Available Purpose: Many studies have been showed transfer of aflatoxins, toxins produced by Aspergillus flvaus and Aspergillus parasiticus fungi, into milk. These toxins are transferred into the milk through digestive system by eating contaminated food. Due to the toxicity of these materials, it seems that it has side effects on the growth of mammary cells. Therefore, the present work aimed to investigate possible toxic effects of aflatoxin B1 (AFB1 on bovine mammary epithelial cells in monolayer and three-dimensional cultures. Methods: Specimens of the mammary tissue of bovine were sized out in size 2×2 cm in slaughterhouse. After disinfection and washing in sterile PBS, primary cell culture was performed by enzymatic digestion of tissue with collagenase. When proper numbers of cells were achieved in monolayer culture, cells were seeded in a 24-well culture plate for three-dimensional (3D culture in Matrigel matrix. After 21 days of 3D culture and reaching the required number of cells, the concentrations of 15, 25 and 35 μL of AFB1 were added to the culture in quadruplicate and incubated for 8 hours. Cellular cytotoxicity was examined using standard colorimetric assay and finally, any change in the morphology of the cells was studied by microscopic technique. Results: Microscopic investigations showed necrosis of the AFB1-exposed cells compared to the control cells. Also, bovine mammary epithelial cells were significantly affected by AFB1 in dose and time dependent manner in cell viability assays. Conclusion: According to the results, it seems that AFB1 can induce cytotoxicity and necrosis in bovine mammary epithelial cells.

  18. Heteroreceptor Complexes Formed by Dopamine D1, Histamine H3, and N-Methyl-D-Aspartate Glutamate Receptors as Targets to Prevent Neuronal Death in Alzheimer's Disease.

    Science.gov (United States)

    Rodríguez-Ruiz, Mar; Moreno, Estefanía; Moreno-Delgado, David; Navarro, Gemma; Mallol, Josefa; Cortés, Antonio; Lluís, Carme; Canela, Enric I; Casadó, Vicent; McCormick, Peter J; Franco, Rafael

    2017-08-01

    Alzheimer's disease (AD) is a neurodegenerative disorder causing progressive memory loss and cognitive dysfunction. Anti-AD strategies targeting cell receptors consider them as isolated units. However, many cell surface receptors cooperate and physically contact each other forming complexes having different biochemical properties than individual receptors. We here report the discovery of dopamine D 1 , histamine H 3 , and N-methyl-D-aspartate (NMDA) glutamate receptor heteromers in heterologous systems and in rodent brain cortex. Heteromers were detected by co-immunoprecipitation and in situ proximity ligation assays (PLA) in the rat cortex where H 3 receptor agonists, via negative cross-talk, and H 3 receptor antagonists, via cross-antagonism, decreased D 1 receptor agonist signaling determined by ERK1/2 or Akt phosphorylation, and counteracted D 1 receptor-mediated excitotoxic cell death. Both D 1 and H 3 receptor antagonists also counteracted NMDA toxicity suggesting a complex interaction between NMDA receptors and D 1 -H 3 receptor heteromer function. Likely due to heteromerization, H 3 receptors act as allosteric regulator for D 1 and NMDA receptors. By bioluminescence resonance energy transfer (BRET), we demonstrated that D 1 or H 3 receptors form heteromers with NR1A/NR2B NMDA receptor subunits. D 1 -H 3 -NMDA receptor complexes were confirmed by BRET combined with fluorescence complementation. The endogenous expression of complexes in mouse cortex was determined by PLA and similar expression was observed in wild-type and APP/PS1 mice. Consistent with allosteric receptor-receptor interactions within the complex, H 3 receptor antagonists reduced NMDA or D 1 receptor-mediated excitotoxic cell death in cortical organotypic cultures. Moreover, H 3 receptor antagonists reverted the toxicity induced by ß 1-42 -amyloid peptide. Thus, histamine H 3 receptors in D 1 -H 3 -NMDA heteroreceptor complexes arise as promising targets to prevent neurodegeneration.

  19. 2-(1H-Imidazol-1-yl)-3-isopropyl-1-benzothieno[3,2-d]pyrimidin-4(3H)-one

    OpenAIRE

    Xu, Sheng-Zhen

    2007-01-01

    In the title compound, C16H14N4OS, the three fused rings of the benzothieno[3,2-d]pyrimidinone unit are essentially coplanar, the maximum deviation from the mean plane being 0.067 (3) Å. The dihedral angle between the mean plane of the fused rings and the imidazole ring is 72.00 (3)°. Offset π–π stacking interactions involving the fused rings are effective in the stabilization of the crystal structure. The centroid–centroid distances between t...

  20. Cd3(MoO4)(TeO3)2: A Polar 3D Compound Containing d10-d0 SCALP-Effect Cations.

    Science.gov (United States)

    Feng, Yuquan; Fan, Huitao; Zhong, Zhiguo; Wang, Hongwei; Qiu, Dongfang

    2016-11-21

    The new polar 3D cadmium molybdotellurite Cd 3 (MoO 4 )(TeO 3 ) 2 was obtained by means of a high-temperature solid-state method. Cd 3 (MoO 4 )(TeO 3 ) 2 is a monoclinic crystal system, and it exhibits the polar space group P2 1 (No. 4). The structure of Cd 3 (MoO 4 )(TeO 3 ) 2 can be viewed as a complicated 3D architecture that is composed of distorted CdO n (n = 6, 7) polyhedra, TeO 3 trigonal pyramids, and MoO 4 polyhedra. The compound features the first 3D NCS cadmium molybdotellurite with 1D 4- and 6-MR channels and a polar structure originating from the TeO 3 groups, MoO 4 groups, and displacements of d 10 Cd 2+ cations. The results were further confirmed by calculations of the net polarization. The UV-vis spectrum and thermal properties indicate that Cd 3 (MoO 4 )(TeO 3 ) 2 exhibits a broad transparent region and excellent thermal stability. SHG tests of Cd 3 (MoO 4 )(TeO 3 ) 2 revealed that its response is approximately the same as that of KH 2 PO 4 at the same grain size between 105 and 150 μm and that it is phase-matchable.

  1. A new picture on the (3+1)D topological mass mechanism

    International Nuclear Information System (INIS)

    Ventura, O S; Amaral, R L P G; Costa, J V; Buffon, L O; Lemes, V E R

    2004-01-01

    We present a class of mappings between the fields of the Cremmer-Sherk and pure BF models in 4D. These mappings are established by two distinct procedures. First, a mapping of their actions is produced iteratively resulting in an expansion of the fields of one model in terms of progressively higher derivatives of the other model fields. Second, an exact mapping is introduced by mapping their quantum correlation functions. The equivalence of both procedures is shown by resorting to the invariance under field scale transformations of the topological action. Related equivalences in 5D and 3D are discussed. The mapping in (2+1)D from the Maxwell-Chern-Simons to pure Chern-Simons models is investigated from a similar perspective

  2. On analytic solutions of (1+3)D relativistic ideal hydrodynamic equations

    International Nuclear Information System (INIS)

    Lin Shu; Liao Jinfeng

    2010-01-01

    In this paper, we find various analytic (1+3)D solutions to relativistic ideal hydrodynamic equations based on embedding of known low-dimensional scaling solutions. We first study a class of flows with 2D Hubble embedding, for which a single ordinary differential equation for the remaining velocity field can be derived. Using this equation, all solutions with transverse 2D Hubble embedding and power law ansatz for the remaining longitudinal velocity field will be found. Going beyond the power law ansatz, we further find a few solutions with transverse 2D Hubble embedding and nontrivial longitudinal velocity field. Finally we investigate general scaling flows with each component of the velocity fields scaling independently, for which we also find all possible solutions.

  3. Crouzon syndrome associated with acanthosis nigricans: prenatal 2D and 3D ultrasound findings and postnatal 3D CT findings

    DEFF Research Database (Denmark)

    Nørgaard, P.; Hagen, CP; Hove, H.

    2012-01-01

    Crouzon syndrome with acanthosis nigricans (CAN) is a very rare condition with an approximate prevalence of 1 per 1 million newborns. We add the first report on prenatal 2D and 3D ultrasound findings in CAN. In addition we present the postnatal 3D CT findings. The diagnosis was confirmed...

  4. Action of ethylene, 1-methylcyclopropene and silver thiosulfate in two developmental stages of potted ornamental pepper(

    Directory of Open Access Journals (Sweden)

    Paula Cristina Carvalho Lima

    2017-09-01

    Full Text Available The species of Capsicum genus have great genetic variability with enormous potential for marketing as ornamental potted plants. The exposure at ethylene induces various deleterious responses during plants life cycle, but there are few studies on how the ethylene affects early developmental stages of these ornamental plants. Thus, this study aimed to evaluate the effects of the application of ethylene and ethylene inhibitors, 1-methylcyclopropene (1-MCP and silver thiosulphate (STS in two early development stages (seedling or initial flowering of potted ornamental peppers of the cultivars ‘Calypso’ and ‘MG 302’. Cultivar ‘MG 302’ showed intermediate sensitivity to ethylene, while the cultivar ‘Calypso’ showed complete abscission of leaves when exposed to 10 µl of ethylene for 48 hours in both development stages. Plants treated with 1-MCP showed similar durability to control for both varieties and developmental stages, and the treatment with 1-MCP + ethylene was beneficial only for ‘MG 302’. STS was the most efficient substance in delaying the ethylene, wherein at stage 1 there was no leaf abscission and at stage 2 had much reduced leaf abscission occurred, regardless the cultivar. Treatment with STS + ethylene was efficient only at stage 1 for ‘Calypso’ and at stage 2 for ‘MG 302’. According to the data, cultivars showed different levels of sensitivity to ethylene, ‘Calypso’ is very sensitive and ‘MG 302’ showed intermediate sensitivity. Regardless the cultivar, STS treatment significantly blocked the ethylene action in both development stages and the use of 1-MCP was less efficient

  5. NIF Ignition Target 3D Point Design

    Energy Technology Data Exchange (ETDEWEB)

    Jones, O; Marinak, M; Milovich, J; Callahan, D

    2008-11-05

    We have developed an input file for running 3D NIF hohlraums that is optimized such that it can be run in 1-2 days on parallel computers. We have incorporated increasing levels of automation into the 3D input file: (1) Configuration controlled input files; (2) Common file for 2D and 3D, different types of capsules (symcap, etc.); and (3) Can obtain target dimensions, laser pulse, and diagnostics settings automatically from NIF Campaign Management Tool. Using 3D Hydra calculations to investigate different problems: (1) Intrinsic 3D asymmetry; (2) Tolerance to nonideal 3D effects (e.g. laser power balance, pointing errors); and (3) Synthetic diagnostics.

  6. Direct chemical synthesis of 1 alpha,25-dihydroxy[26,27-3H] vitamin D3 with high specific activity: its use in receptor studies

    International Nuclear Information System (INIS)

    Napoli, J.L.; Mellon, W.S.; Fivizzani, M.A.; Schnoes, H.K.; DeLuca, H.F.

    1980-01-01

    The first direct chemical synthesis of radiolabeled 1 alpha, 25-dihydroxyvitamin D3 is reported. Unlike all previous syntheses, the new approach does not rely on enzymatic 1 alpha-hydroxylation of radiolabeled precursors. Rather, isotope is introduced in the last synthetic step by reaction of [3H] -methylmagnesium bromide with methyl 1 alpha-hydroxy-26,27-dinorvitamin D3-25-carboxylate to give 1 alpha,25-dihydroxy-[26,27-3H] vitamin D3 with a specific activity of 160 Ci/mmol. Mass spectroscopy confirmed that the radiohormone consists of a single isomer with six tritium atoms bound to carbons 26 and 27. Synthetically produced 1 alpha,25-dihydroxy [26,27-3H] vitamin D3 is indistinguishable from 1 alpha,25-dihydroxy-[26,27-3H] vitamin D3 obtained from the enzymatic 1 alpha-hydroxylation of 25-hydroxy[26,27-3H] vitamin D3 (160 Ci/mmol) by high-pressure liquid chromatography analysis and in the competitive binding assay using chick intestinal cytosol as the receptor source. Equilibrium dissociation constant measurements with the high specific activity radiohormone indicate a Kd of 8.2 x 10(-11) M for the chick intestinal cytosol 1 alpha,25-dihydroxyvitamin D3 receptor--a value considerably lower than the constants in the range of (1-5) x 10(-9) M previously reported

  7. Testicular cancer: seminoma. Stage I. Adjuvant radiotherapy. Results at 3 years

    International Nuclear Information System (INIS)

    Lione, M.; Ticera, N.; Mandachain, M.

    2008-01-01

    Full text: Purpose: To evaluate the results achieved with adjuvant radiotherapy. Materials and methods: We analyzed 40 medical records of patients diagnosed with stage I of testicular cancer, all of them received adjuvant radiotherapy between April 1992 and May 2004. The histological type was classical seminoma (95%) and spermatocytes (5%). Diagnosis and staging were performed with testicular ultrasound, determination of tumor markers, computed tomography of abdomen - pelvis and chest radiographs. Radiotherapy: Patients were treated with 60 Co unit and a linear accelerator of 6 MV photons. Volumes: Group I: lumboaortic lymph node region and ipsilateral pelvis. Group II: lumboaortic only. Daily dose: 1.8 Gy, total dose: 30.6 Gy. Patient in supine position, 2 parallel fields and opposed, DFP: 80 cm, calculated from midplane. They were followed for 3 years with chest X-ray, CAT scan of abdomen and pelvis at 12 months and then a full clinical control 1 time per year. Results: We defined the rate of ipsilateral pelvic node recurrence (group I: 0% vs. Group II: 6.25%), progression at distance (group I: 8.3% vs. Group II: 0%) and global survival (GS) (group I: 100% vs. group II: 100%) at 3 years of follow up. Conclusions: Our result is similar to that published in the international literature. Given the small number of patients, no evidence of changes in GS with the addition of radiotherapy to ipsilateral pelvic node. Radiation therapy to lumboaortic lymph nodes is the usual treatment, being necessary to optimize the modality of radiotherapy (RC3D - IRMT) to reduce toxicity in a long term. (authors) [es

  8. Rapid Prototyping across the Spectrum: RF to Optical 3D Electromagnetic Structures

    Science.gov (United States)

    2015-11-17

    fabricated using 3D printer . The fill factor decreases radially outwards and the voids are visible in the unit cells as you approach the periphery of the...fabricated in 3D PhC template. The height of letters is 0.7 mm as designed in the motion stage control program [110...with thin walls) [29]. Figure 6: Examples of lenses fabricated with AM (a) GRIN lens fabricated using 3D printer . The fill factor decreases

  9. 3D-MR vs. 3D-CT of the shoulder in patients with glenohumeral instability

    Energy Technology Data Exchange (ETDEWEB)

    Stillwater, Laurence; Koenig, James; Maycher, Bruce; Davidson, Michael [University of Manitoba, Winnipeg (Canada)

    2017-03-15

    To determine whether 3D-MR osseous reformats of the shoulder are equivalent to 3D-CT osseous reformats in patients with glenohumeral instability. Patients with glenohumeral instability, who were to be imaged with both CT and MRI, were prospectively selected. CT and MR were performed within 24 h of one another on 12 shoulders. Each MR study included an axial 3D isotropic VIBE sequence. The image data from the isotropic VIBE sequence were post-processed using subtraction and 3D software. CT data were post-processed using 3D software. The following measurements were obtained for both 3D-CT and 3D-MR post-processed images: height and width of the humeral head and glenoid, Hill-Sachs size and percent humeral head loss (if present), size of glenoid bone loss and percent glenoid bone loss (if present). Paired t-tests and two one-sided tests for equivalence were used to assess the differences between imaging modalities and equivalence. The measurement differences from the 3D-CT and 3D-MR post-processed images were not statistically significant. The measurement differences for humeral height, glenoid height and glenoid width were borderline statistically significant; however, using any adjustment for multiple comparisons, this failed to be significant. Using an equivalence margin of 1 mm for measurements and 1.5% for percent bone loss, the 3D-MR and 3D-CT post-processed images were equivalent. Three-dimensional-MR osseous models of the shoulder using a 3D isotropic VIBE sequence were equivalent to 3D-CT osseous models, and the differences between modalities were not statistically significant. (orig.)

  10. AxiSEM3D: broadband seismic wavefields in 3-D aspherical Earth models

    Science.gov (United States)

    Leng, K.; Nissen-Meyer, T.; Zad, K. H.; van Driel, M.; Al-Attar, D.

    2017-12-01

    Seismology is the primary tool for data-informed inference of Earth structure and dynamics. Simulating seismic wave propagation at a global scale is fundamental to seismology, but remains as one of most challenging problems in scientific computing, because of both the multiscale nature of Earth's interior and the observable frequency band of seismic data. We present a novel numerical method to simulate global seismic wave propagation in realistic 3-D Earth models. Our method, named AxiSEM3D, is a hybrid of spectral element method and pseudospectral method. It reduces the azimuthal dimension of wavefields by means of a global Fourier series parameterization, of which the number of terms can be locally adapted to the inherent azimuthal smoothness of the wavefields. AxiSEM3D allows not only for material heterogeneities, such as velocity, density, anisotropy and attenuation, but also for finite undulations on radial discontinuities, both solid-solid and solid-fluid, and thereby a variety of aspherical Earth features such as ellipticity, topography, variable crustal thickness, and core-mantle boundary topography. Such interface undulations are equivalently interpreted as material perturbations of the contiguous media, based on the "particle relabelling transformation". Efficiency comparisons show that AxiSEM3D can be 1 to 3 orders of magnitude faster than conventional 3-D methods, with the speedup increasing with simulation frequency and decreasing with model complexity, but for all realistic structures the speedup remains at least one order of magnitude. The observable frequency range of global seismic data (up to 1 Hz) has been covered for wavefield modelling upon a 3-D Earth model with reasonable computing resources. We show an application of surface wave modelling within a state-of-the-art global crustal model (Crust1.0), with the synthetics compared to real data. The high-performance C++ code is released at github.com/AxiSEM3D/AxiSEM3D.

  11. Laser printing of cells into 3D scaffolds

    International Nuclear Information System (INIS)

    Ovsianikov, A; Gruene, M; Koch, L; Maiorana, F; Chichkov, B; Pflaum, M; Wilhelmi, M; Haverich, A

    2010-01-01

    One of the most promising approaches in tissue engineering is the application of 3D scaffolds, which provide cell support and guidance in the initial tissue formation stage. The porosity of the scaffold and internal pore organization influence cell migration and play a major role in its biodegradation dynamics, nutrient diffusion and mechanical stability. In order to control cell migration and cellular interactions within the scaffold, novel technologies capable of producing 3D structures in accordance with predefined design are required. The two-photon polymerization (2PP) technique, used in this report for the fabrication of scaffolds, allows the realization of arbitrary 3D structures with submicron spatial resolution. Highly porous 3D scaffolds, produced by 2PP of acrylated poly(ethylene glycol), are seeded with cells by means of laser-induced forward transfer (LIFT). In this laser printing approach, a propulsive force, resulting from laser-induced shock wave, is used to propel individual cells or cell groups from a donor substrate towards the receiver substrate. We demonstrate that with this technique printing of multiple cell types into 3D scaffolds is possible. Combination of LIFT and 2PP provides a route for the realization of 3D multicellular tissue constructs and artificial ECM engineered on the microscale.

  12. 2-[F-18] fluoro-2-deoxy-D-glucose (FDG) PET in the clinical decision making of esophageal carcinoma: Initial staging and re-staging, evaluating treatment response and residual disease and detecting relapse

    International Nuclear Information System (INIS)

    Basu, S.; Nair, N.; Joseph, J.K.; Sharma, S.; Kanhere, H.

    2004-01-01

    Full text: Accurate initial staging is essential in the management of esophageal carcinoma. The 5-year survival rate is 3% for patients with metastatic disease at the initial assessment, while the same is 42% for patients with nodal disease. 18F-FDG PET is being actively tested regarding its clinical utility at several centers in this malignancy. We at our center are assessing the role of this investigational modality in staging, evaluating treatment response especially after neo-adjuvant therapy and detecting relapse vis-a-vis the other conventionally used modalities e.g. Endoscopic ultrasound (EUS) and the CT scan. The study population consisted of histologically proven cases of esophageal carcinoma who were mainly referred from the department of thoracic surgery of the neighboring Tata Memorial Hospital with few cases from the outside centers. FDG was produced by an automated nucleophilic method based on the Hamacher procedure. Patients were fasting at least for 6 hours. Sixty minutes after injection of 370 MBq FDG, patients were imaged on the dedicated BGO based GE Advance PET scanner (General Electric Medical systems, Milwaukee, WI). Images were reconstructed using the attenuation weighted Ordered Subsets Expectation Maximization (OSEM) algorithm. Axial, coronal, sagittal and 3D images were visually interpreted and foci of increased tracer uptake were considered as disease involvement. The PET scan was interpreted by two experienced nuclear medicine physicians, who were blinded regarding the results of CT scan and EUS except for the location of the primary. The findings of PET were then compared lesion by lesion with that of CT and EUS regarding staging, treatment response evaluation and residual disease evaluation. Till date, the total number of cases of esophageal carcinoma studied was 12, which consisted of primaries in the proximal third (n=1), middle third (n=4) and distal third (n=7). The number of cases assessed for the initial staging purpose was 7

  13. 1,25-Dihydroxyvitamin D3 inhibits cytokine production by human blood monocytes at the post-transcriptional level

    DEFF Research Database (Denmark)

    Müller, K; Haahr, P M; Diamant, M

    1992-01-01

    was not caused by impaired production of mRNA. Taken together, the study demonstrates a vitamin D-induced inhibitory effect of LPS-driven monokine production, which is most likely a vitamin D-receptor mediated phenomenon exerted at a post-transcriptional, presecretory level. Impaired monokine production may...... be of importance in 1,25-(OH)2D3-mediated inhibition of lymphocyte functions in vitro.......1,25-Dihydroxyvitamin D3 [1,25-(OH)2D3] inhibits lymphocyte proliferation and production of antibodies and lymphokines such as interleukin (IL)-2 and interferon gamma. These lymphocyte functions are dependent upon cytokines, including IL-1 alpha, IL-1 beta, IL-6 and tumour necrosis factor alpha...

  14. 3D Object Metamorphosis with Pseudo Metameshes

    Directory of Open Access Journals (Sweden)

    MOCANU, B.

    2015-02-01

    Full Text Available In this paper we introduce a novel framework for 3D object metamorphosis, represented by closed triangular meshes. The systems returns a high quality transition sequence, smooth and gradual, that is visual pleasant and consistent to both source and target topologies. The method starts by parameterizing both the source and the target model to a common domain (the unit sphere. Then, the features selected from the two models are aligned by applying the CTPS C2a radial basis functions. We demonstrate how the selected approach can create valid warping by deforming the models embedded into the parametric domain. In the final stage, we propose and validate a novel algorithm to construct a pseudo-supermesh able to approximate both, the source and target 3D objects. By using the pseudo-supermesh we developed a morphing transition consistent with respect to both geometry and topology of the 3D models.

  15. Comparison of Transport Calculation Between 2D/1D synthesis and RAPTOR-M3G at Core Barrel of Korea Standard Nuclear Plant(KSNP), OPR-1000

    Energy Technology Data Exchange (ETDEWEB)

    Maeng, Young Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou [Korea Reactor Integrity Surveillance Technology, Daejeon (Korea, Republic of); Yoo, Chun Sung [Korea Atomic Energy Research Institutes, Daejeon (Korea, Republic of)

    2013-10-15

    The DORT code for 2D/1D synthesis has been actively applied to calculate the fast neutron (E>1.0MeV) fluence exposure of RPV. RAPTOR-M3G code is also applied for the comparison of 2D/1D synthesis, and it was found that 2D/1D synthesis method generally provided more conservative results than RAPTOR-M3G at both RPV and surveillance capsule locations. As a result, definitely RAPTOR-M3G for 3D calculation must apply for accurate evaluation of the integrity and ageing of RPV and internal structures. Therefore, the purpose of this paper is to compare the differences in terms of geometric aspect of KSNP model between 2D/1D synthesis and RAPTOR-M3G at core barrel area. 2D/1D synthesis method shows still higher results at the shortest distance of bypass water region. The reason is that 2D/1D synthesis method has excessive conservatism because of having just one model of R-θ and R-Z separately. Angles (5, 25, 45, 65 and 90 degrees) that RAPTOR-M3G results are higher than 2D/1D synthesis results seem to have almost regular interval. The reason can be that neutron flux to reach to barrel is affected by the nearest core definitely and all of near core areas including bypass water. RAPTOR-M3G performing 3D calculation can be applied to various reactor structures, because the code can simulate the model realistically and reasonably in geometric view points. Understanding the phenomenon that 45 degree shows downward peak, in spite of baffle corner location, remains.

  16. Comparison of Transport Calculation Between 2D/1D synthesis and RAPTOR-M3G at Core Barrel of Korea Standard Nuclear Plant(KSNP), OPR-1000

    International Nuclear Information System (INIS)

    Maeng, Young Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou; Yoo, Chun Sung

    2013-01-01

    The DORT code for 2D/1D synthesis has been actively applied to calculate the fast neutron (E>1.0MeV) fluence exposure of RPV. RAPTOR-M3G code is also applied for the comparison of 2D/1D synthesis, and it was found that 2D/1D synthesis method generally provided more conservative results than RAPTOR-M3G at both RPV and surveillance capsule locations. As a result, definitely RAPTOR-M3G for 3D calculation must apply for accurate evaluation of the integrity and ageing of RPV and internal structures. Therefore, the purpose of this paper is to compare the differences in terms of geometric aspect of KSNP model between 2D/1D synthesis and RAPTOR-M3G at core barrel area. 2D/1D synthesis method shows still higher results at the shortest distance of bypass water region. The reason is that 2D/1D synthesis method has excessive conservatism because of having just one model of R-θ and R-Z separately. Angles (5, 25, 45, 65 and 90 degrees) that RAPTOR-M3G results are higher than 2D/1D synthesis results seem to have almost regular interval. The reason can be that neutron flux to reach to barrel is affected by the nearest core definitely and all of near core areas including bypass water. RAPTOR-M3G performing 3D calculation can be applied to various reactor structures, because the code can simulate the model realistically and reasonably in geometric view points. Understanding the phenomenon that 45 degree shows downward peak, in spite of baffle corner location, remains

  17. 3D Information System of Historical Site – Proposal and Realisation of a Functional Prototype

    Directory of Open Access Journals (Sweden)

    J. Hodač

    2005-01-01

    Full Text Available The development of methods for 3D data acquisition, together with progress in information technologies raises the question of creating and using 3D models and 3D information systems (IS of historical sites and buildings. This paper presents the current state of the “Live Theatre” project. The theme of the project is the proposal and realisation of a 3D IS of the baroque theatre at Eeský Krumlov castle (UNESCO site.The project is divided into three main stages – creation of a 3D model, proposal of a conception for a 3D IS, and realisation of a functional prototype. 3D data was acquired by means of photogrammetric and surveying methods. An accurate 3D model (photo-realistic, textured was built up with MicroStation CAD system. The proposal of a conception of a 3D IS was the main outcome of the author’s dissertation. The essential feature of the proposed conception is the creation of subsystems targeted on three spheres – management, research and presentation of the site. The functionality of each subsystem is connected with its related sphere; however, each subsystem uses the same database. The present stage of the project involves making a functional prototype (with sample data. During this stage we are working on several basic technological topics. At present we are concerned with 3D data, its formats, format conversions (e.g. DGN _ VRML and its connection to other types of data. After that, we will be seeking a convenient technical solution based on network technologies (Internet and an appropriate layout for the data (database. The project is being carried out in close co-operation with the administration of the castle and some other partners. This stage of the project will be completed in December 2005.A functional prototype and the information acquired by testing it will form the basis for the final proposal of a complex IS of a historical site. The final proposal and appropriate technology will be the outcome of the project. The

  18. An ochre mutation in the vitamin D receptor gene causes hereditary 1,25-dihydroxyvitamin D sub 3 -resistant rickets in three families

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, H.H.; Hughes, M.R.; Thompson, E.T.; Pike, J.W.; O' Malley, B.W. (Baylor College of Medicine, Houston, TX (USA)); Malloy, P.J.; Feldman, D. (Stanford Univ. School of Medicine, CA (USA)); Hochberg, Z. (Rambam Medical Center, Haifa (Israel))

    1989-12-01

    Hereditary 1,25-dihydroxyvitamin D{sub 3}-resistant rickets is a rare autosomal-recessive disease resulting from target-organ resistance to the action of the active hormonal form of vitamin D. Four affected children from three related families with the classical syndrome of hereditary 1,25-dihydroxyvitamin D{sub 3}-resistant rickets and the absence of detectable binding to the vitamin D receptor (VDR) in cultured fibroblasts or lymphoblasts were examined for genetic abnormalities in the VDR gene. Genomic DNA from Epstein-Barr virus-transformed lymphoblasts of eight family members was isolated and amplified by polymerase chain reaction techniques. Amplified fragments containing the eight structural exons encoding the VDR protein were sequenced. The DNA from all affected children exhibited a single C {yields} A base substitution within exon 7 at nucleotide 970. Although the affected children were all homozygotic for the mutation, the four parents tested all exhibited both wild-type and mutant alleles, indicating a heterozygous state. Recreated mutant receptor exhibited no specific 1,25-({sup 3}H)dihydroxyvitamin D{sub 3} binding and failed to activate a cotransfected VDR promoter-reporter gene construct. Thus these findings identify an ochre mutation in a human steroid hormone receptor in patients with hereditary 1,25-dihydroxyvitamin D{sub 3}-resistant rickets.

  19. Endometrial cancer: preoperative staging using three-dimensional T2-weighted turbo spin-echo and diffusion-weighted MR imaging at 3.0 T: a prospective comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Hori, Masatoshi; Kim, Tonsok; Onishi, Hiromitsu; Nakamoto, Atsushi; Tomiyama, Noriyuki [Osaka University Graduate School of Medicine, Department of Radiology, Suita, Osaka (Japan); Imaoka, Izumi; Kagawa, Yuki; Murakami, Takamichi [Kinki University School of Medicine, Department of Radiology, Osaka (Japan); Ueguchi, Takashi; Tatsumi, Mitsuaki [Osaka University Hospital, Department of Radiology, Osaka (Japan); Enomoto, Takayuki [Osaka University Graduate School of Medicine, Department of Obstetrics and Gynecology, Osaka (Japan); Niigata University School of Medicine, Department of Obstetrics and Gynecology, Niigata (Japan); Kimura, Tadashi [Osaka University Graduate School of Medicine, Department of Obstetrics and Gynecology, Osaka (Japan)

    2013-08-15

    To prospectively assess the efficacy of 3-T magnetic resonance (MR) imaging using the three-dimensional turbo spin-echo T2-weighted and diffusion-weighted technique (3D-TSE/DW) compared with that of conventional imaging using the two-dimensional turbo spin-echo T2-weighted and dynamic contrast-enhanced technique (2D-TSE/DCE) for the preoperative staging of endometrial cancer, with pathological analysis as the reference standard. Seventy-one women with endometrial cancer underwent MR imaging using 3D-TSE/DW (b = 1,000 s/mm{sup 2}) and 2D-TSE/DCE. Two radiologists independently assessed the two imaging sets. Accuracy, sensitivity, and specificity for staging were analysed with the McNemar test; the areas under the receiver operating characteristic curve (Az) were compared with a univariate z-score test. The results for assessing deep myometrial invasion, accuracy, sensitivity, specificity and Az, respectively, were as follows: 3D-TSE/DW - observer 1, 87 %, 95 %, 85 % and 0.96; observer 2, 92 %, 84 %, 94 % and 0.95; 2D-TSE/DCE - observer 1, 80 %, 79 %, 81 % and 0.89; observer 2, 86 %, 84 %, 87 % and 0.86. Most of the values were higher with 3D-TSE/DW without significant differences (P > 0.12). For assessing cervical stromal invasion, there were no significant differences in those values for both observers (P > 0.6). Accuracy of 3D-TSE/DW was at least equivalent to that of the conventional technique for the preoperative assessment of endometrial cancer. (orig.)

  20. NKT cells can help mediate the protective effects of 1,25-dihydroxyvitamin D3 in experimental autoimmune encephalomyelitis in mice.

    Science.gov (United States)

    Waddell, Amanda; Zhao, Jun; Cantorna, Margherita T

    2015-05-01

    Active vitamin D [1,25-dihydroxyvitamin D3 (1,25D3)] blocks the development of experimental autoimmune diseases. However, the molecular and immunobiological mechanisms underlying 1,25D3's anti-inflammatory properties are not fully understood. We employed a murine model of experimental autoimmune encephalomyelitis (EAE) in order to determine the role of NKT cells in 1,25D3-mediated protection from EAE. Wild-type (WT) mice or mice lacking all NKT cells (CD1d(-/-)) or invariant NKT cells (Jα18(-/-)) were fed control or 1,25D3-supplemented diets. All mice fed with the control diet developed severe EAE. 1,25D3 treatment of WT mice protected them from developing EAE. CD1d(-/-) and Jα18(-/-) mice treated with 1,25D3 were not protected to the same extent as WT mice. Myelin oligodendrocyte glycoprotein-specific IL-17 and IFN-γ production was significantly reduced in 1,25D3 WT mice compared with WT but was not decreased in 1,25D3 CD1d(-/-) mice compared with CD1d(-/-) mice. IL-4(-/-) mice were utilized to determine how IL-4 deficiency affects susceptibility to EAE. IL-4(-/-) mice were not protected from developing EAE by α-galactosylceramide (α-GalCer) or 1,25D3 treatment. Furthermore, 1,25D3 treatment of splenocytes in vitro decreased α-GalCer-induced IL-17 and increased IL-4, IL-5 and IL-10 production. 1,25D3 alters the cytokine profile of invariant NKT cells in vitro. These studies demonstrate that NKT cells are important mediators of 1,25D3-induced protection from EAE in mice and NKT cell-derived IL-4 may be an important factor in providing this protection. © The Japanese Society for Immunology. 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.