WorldWideScience

Sample records for stacked-foil activation technique

  1. Measurement of excitation functions for natPb( p, xn)199,200,201Pb reactions with stacked foil activation technique at KOMAC

    Science.gov (United States)

    Lee, Jieun; Yoon, Jungran; Ro, Taeik; Lee, Samyol

    2018-01-01

    The excitation functions of natPb( p, xn)199,200,201Pb reactions within the proton energy of 71.5 - 91.7 MeV were measured by using the 100-MeV linear accelerator at the Korea Multi-Purpose Accelerator Complex (KOMAC). The stacked foil activation and off-line gamma-ray spectrometric technique was used in the present study. The 27Al( p, 3 p + n)24Na monitor reaction was used to estimate the proton flux. The excitation functions of natPb( p, xn)199,200,201Pb reactions were derived from the photo-peak activities of delayed γ-rays of the produced nuclei. The present results have been compared with the literature data and the theoretical values from TENDL-2015 library. The natPb( p, xn)199,201Pb reaction cross-sections at the proton energy of 91.7 MeV has been measured for the first time, whereas for the proton energies of 71.5 - 84.5 MeV are in general agreement with the literature data within limits of uncertainty. Overall, the experimental data from the present work and literature show increase trend with proton energy similar to the theoretical values of TENDL-2015 library with some systematic differences.

  2. The Activation of Fe by Deuterons at Energies up to 20 MeV

    Czech Academy of Sciences Publication Activity Database

    Závorka, Lukáš; Šimečková, Eva; Honusek, Milan; Katovsky, K.

    2011-01-01

    Roč. 59, č. 2 (2011), s. 1961-1964 ISSN 0374-4884 Institutional research plan: CEZ:AV0Z10480505 Keywords : Deuteron activation * Natural iron target * Stacked foil technique * Excitation function Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.447, year: 2011

  3. Activation cross-section data for alpha α-particle-induced nuclear reactions on natural vanadium for practical applications

    Science.gov (United States)

    Ali, B. M.; Al-Abyad, M.; Seddik, U.; El-Kameesy, S. U.; Ditrói, F.; Takács, S.; Tárkányi, F.

    2018-03-01

    Excitation functions for α -induced reactions on natural vanadium were measured in the energy range up to 20 MeV. The stacked-foil activation technique was used. The experimental results were compared with the theoretical calculations using EMPIRE-3.1, EMPIRE-3.2.2 and TENDL 2015, and with earlier experimental results. Thick target yields were calculated for the production of ^{54}Mn and for the associated impurity ^{52}Mn.

  4. Remeasurement and compilation of excitation function of proton induced reactions on iron for activation techniques

    International Nuclear Information System (INIS)

    Takacs, S.; Vasvary, L.; Tarkanyi, F.

    1994-01-01

    Excitation functions of proton induced reactions on nat Fe(p, xn) 56 Co have been remeasured in the energy region up to 18 MeV using stacked foil technique and standard high resolution gamma-ray spectrometry at the Debrecen MGC-20E cyclotron. Compilation of the available data measured between 1959 and 1993 has been made. The corresponding excitation functions have been reviewed, critical comparison of all the available data was done to obtain the most accurate data set. The feasibility of the evaluated data set was checked by reproducing experimental calibration curves for TLA by calculation. (orig.)

  5. Depth profiling of residual activity of ^{237}U fragments as a range verification technique for ^{238}U primary ion beam

    Directory of Open Access Journals (Sweden)

    I. Strašík

    2012-07-01

    Full Text Available Experimental and simulation data concerning fragmentation of ^{238}U ion beam in aluminum, copper, and stainless-steel targets with the initial energy 500 and 950  MeV/u are collected in the paper. A range-verification technique based on depth profiling of residual activity is presented. The irradiated targets were constructed in the stacked-foil geometry and analyzed using gamma-ray spectroscopy. One of the purposes of these experiments was depth profiling of residual activity of induced nuclides and projectile fragments. Among the projectile fragments, special attention is paid to the ^{237}U isotope that has a range very close to the range of the primary ^{238}U ions. Therefore, the depth profiling of the ^{237}U isotope can be utilized for experimental verification of the ^{238}U primary-beam range, which is demonstrated and discussed in the paper. The experimental data are compared with computer simulations by FLUKA, SRIM, and ATIMA, as well as with complementary experiments.

  6. Extension of activation cross section data of long lived products in deuteron induced nuclear reactions on platinum up to 50 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Ditrói, F., E-mail: ditroi@atomki.hu [Institute for Nuclear Research, Hungarian Academy of Sciences, Debrecen (Hungary); Tárkányi, F.; Takács, S. [Institute for Nuclear Research, Hungarian Academy of Sciences, Debrecen (Hungary); Hermanne, A. [Cyclotron Laboratory, Vrije Universiteit Brussel, Brussels (Belgium)

    2017-06-15

    Highlights: • Deuteron induced nuclear reactions on natural platinum up to 50 MeV. • Stacked foil irradiation technique. • Comparison with the TENDL-2014 and TENDL-2015 calculations. • Cross section of Au, Pt and Ir radioisotopes. • Application for Thin Layer Activation (TLA). - Abstract: In the frame of a systematical study of light ion induced nuclear reactions on platinum, activation cross sections for deuteron induced reactions were investigated. Excitation functions were measured in the 20.8–49.2 MeV energy range for the {sup nat}Pt(d,xn){sup 191,192,193,194,195,196m2,196g,198g,199}Au, {sup nat}Pt(d,x){sup 188,189,191,195m,197m,197g}Pt and {sup nat}Pt(d,x){sup 189,190,192,194m2}Ir reactions by using the stacked foil irradiation technique. The experimental results are compared with previous results from the literature and with the theoretical predictions in the TENDL-2014 and TENDL-2015 libraries. The applicability of the produced radio-tracers for wear measurements has been presented.

  7. Proton and deuteron activation measurements at the NPI and future plans in SPIRAL2/NFS

    Science.gov (United States)

    Šimečková, Eva; Bém, Pavel; Mrázek, Jaromír; Štefánik, Milan; Běhal, Radomír; Gladolev, Vadim

    2017-09-01

    The proton- and deuteron-induced reactions are of a great interest for the assessment of induced radioactivity of accelerator components, target and beam stoppers as well as isotope production for medicine. In the present work, the deuteron-induced reaction cross sections on zinc were investigated by stacked-foil activation technique with deuteron beam of 20 MeV energy from the cyclotron U-120M of NPI CAS Řež. Also the proton activation cross section measurement of iron is presented. The comparison of present results to data of other authors and to predictions of evaluated data libraries is discussed. The investigation shall continue for higher proton and deuteron energy interval 20-35 MeV at SPIRAL2/NFS facility using a charged particle irradiation chamber with pneumatic transport system to measure isotopes and isomers with half-lives in minutes-regions.

  8. The activation of W and Zr by deuterons at energies up to 20 MeV

    Directory of Open Access Journals (Sweden)

    Šimečková Eva

    2017-01-01

    Full Text Available The proton and deuteron induced reactions are of a great interest for the assessment of induced radioactivity of accelerator components, target and beam stoppers. In order to investigate the important nuclides, we have carried up the irradiation experiments with the variable-energy cyclotron U-120 M of the NPI CAS Řež. The production cross sections of the nuclides 179,181,182m,182,183,184m,184,186Re and 187W from reaction on natural W were investigated by deuteron beams of 20 MeV energy. A part of preliminary results of deuteron activation of natural Zr is also shown. The stacked-foil technique was utilized. The comparison of present results to data of other authors and to predictions of evaluated data libraries is discussed.

  9. Measurements of cross-sections of the proton-induced activation reactions

    CERN Document Server

    Uddin, M S; Ditrói, F; Hagiwara, M; Tarkanyi, F

    2005-01-01

    Excitation functions for the /sup 89/Y(p, x)/sup 89,88,86/Zr, /sup 89 /Y(p, x)/sup 88,87,87m,86/Y, /sup 89/Y(p, x)/sup 85,83,82/Sr and /sup 89/Y(p, x)/sup 84,83/Rb reactions were measured by a stacked foil activation technique in the energy range 15-80 MeV. The production for the long lived products like /sup 88/Zr, and /sup 88/Y are significantly larger than that of /sup nat/Mo+p, /sup nat/Nb+p and /sup nat/Zr+p processes. The productions of the medical isotopes, /sup 85/Sr and /sup 83/Sr are also effective by Y+p process using 80 MeV beam. The model calculations using ALICE-IPPE code compiled in MENDL-2P have the general trend of the measured results.

  10. Techniques for active passivation

    Science.gov (United States)

    Roscioli, Joseph R.; Herndon, Scott C.; Nelson, Jr., David D.

    2016-12-20

    In one embodiment, active (continuous or intermittent) passivation may be employed to prevent interaction of sticky molecules with interfaces inside of an instrument (e.g., an infrared absorption spectrometer) and thereby improve response time. A passivation species may be continuously or intermittently applied to an inlet of the instrument while a sample gas stream is being applied. The passivation species may have a highly polar functional group that strongly binds to either water or polar groups of the interfaces, and once bound presents a non-polar group to the gas phase in order to prevent further binding of polar molecules. The instrument may be actively used to detect the sticky molecules while the passivation species is being applied.

  11. Production parameters of the therapeutic 105 Rh radionuclide using ...

    Indian Academy of Sciences (India)

    induced reactions on natural palladium target were measured using stacked-foil activation technique combined with high resolution -ray spectrometry at the MC50 cyclotron of the Korea Institute of Radiological and Medical Sciences. Note that ...

  12. Journaling; an active learning technique.

    Science.gov (United States)

    Blake, Tim K

    2005-01-01

    Journaling is a method frequently discussed in nursing literature and educational literature as an active learning technique that is meant to enhance reflective practice. Reflective practice is a means of self-examination that involves looking back over what has happened in practice in an effort to improve, or encourage professional growth. Some of the benefits of reflective practice include discovering meaning, making connections between experiences and the classroom, instilling values of the profession, gaining the perspective of others, reflection on professional roles, and development of critical thinking. A review of theory and research is discussed, as well as suggestions for implementation of journaling into coursework.

  13. Measurement of activation cross sections of the proton induced nuclear reactions on palladium

    International Nuclear Information System (INIS)

    Ditroi, F.; Tarkanyi, F.; Takacs, S.; Mahunka, I.; Csikai, J.; Hermanne, A.; Uddin, M.S.; Hagiwara, M.; Baba, M.; Ido, T.

    2007-01-01

    Excitation functions of proton induced reactions on Pd are important for medical radioisotope production, for activation analysis, for development of low activation materials and other purposes. No experimental data exist in the literature for low and medium energy range protons. A detailed study of the excitation functions was performed up to 80 MeV proton energy by using the stacked foil irradiation technique and gamma-ray spectrometry. The irradiations were carried out at the external beam lines of the AVF cyclotron at the Tohoku University, Japan (80 and 70 MeV) and the CGR 560 cyclotron at the Vrije Universiteit Brussels (38, 29 and 17 MeV). The beam intensity, the incident energy and the energy degradation were controlled by a method based on flux constancy via normalization to the parallel measured excitation functions of nat Al(p,x) 22,24 Na and nat Cu(p,x) 56,58 Co, 62,65 Zn monitor reactions. Excitation functions for direct and cumulative cross sections have been measured for the production of 105mg,106m,110m Ag, 101 Pd, 101 mRh and 97 Ru radionuclei. Calculations for the excitation functions using the Alice-IPPE code were performed with a view to estimate the weight of the different contributing reactions and to check the trend and the magnitude of the obtained experimental data. (author)

  14. Activation cross sections of longer-lived radionuclides produced in germanium by alpha particle irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Takács, S., E-mail: stakacs@atomki.hu [Institute for Nuclear Research, Hungarian Academy of Sciences, Atomki, 4026 Debrecen (Hungary); Takács, M.P.; Ditrói, F. [Institute for Nuclear Research, Hungarian Academy of Sciences, Atomki, 4026 Debrecen (Hungary); Aikawa, M. [Faculty of Science, Hokkaido University, Sapporo 060-0810 (Japan); Haba, H.; Komori, Y. [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan)

    2016-09-15

    The cross sections of alpha particles induced nuclear reactions on natural germanium were investigated by using the standard stacked foil target technique, the activation method and high resolution gamma spectrometry. Targets with thickness of about 1 μm were prepared from natural Ge by vacuum evaporation onto 25 μm thick polyimide (Kapton) backing foils. Stacks were composed of Kapton-Ge-Ge-Kapton sandwich target foils and additional titanium monitor foils with nominal thickness of 11 μm to monitor the beam parameters using the {sup nat}Ti(α,x){sup 51}Cr reaction. The irradiations were done with E{sub α} = 20.7 and E{sub α} = 51.25 MeV, I{sub α} = 50 nA alpha particle beams for about 1 h. Direct or cumulative activation cross sections were determined for production of the {sup 72,73,75}Se, {sup 71,72,74,76,78}As, and {sup 69}Ge radionuclides. The obtained experimental cross sections were compared to the results of theoretical calculations taken from the TENDL data library based on the TALYS computer code. A comparison was made with available experimental data measured earlier. Thick target yields were deduced from the experimental cross sections and compared with the data published before.

  15. Active learning techniques for librarians practical examples

    CERN Document Server

    Walsh, Andrew

    2010-01-01

    A practical work outlining the theory and practice of using active learning techniques in library settings. It explains the theory of active learning and argues for its importance in our teaching and is illustrated using a large number of examples of techniques that can be easily transferred and used in teaching library and information skills to a range of learners within all library sectors. These practical examples recognise that for most of us involved in teaching library and information skills the one off session is the norm, so we need techniques that allow us to quickly grab and hold our

  16. Activation cross-sections of deuteron induced nuclear reactions on neodymium up to 50 MeV

    International Nuclear Information System (INIS)

    Tárkányi, F.; Takács, S.; Ditrói, F.; Hermanne, A.; Yamazaki, H.; Baba, M.; Mohammadi, A.; Ignatyuk, A.V.

    2014-01-01

    Highlights: • Experimental excitation function of deuteron induced reactions on natural Nd. • Model code calculations with EMPIRE-D, ALICE-D and TALYS (TENDL-2012). • Physical yield calculation and comparison. • Discussion of medical and industrial applications. - Abstract: In the frame of a systematic study of activation cross sections of deuteron induced nuclear reactions on rare earths, the reactions on neodymium for production of therapeutic radionuclides were measured for the first time. The excitation functions of the nat Nd(d,x) 151,150,149,148m,148g,146,144,143 Pm, 149,147,139m Nd, 142 Pr and 139g Ce nuclear reactions were assessed by using the stacked foil activation technique and high resolution γ-spectrometry. The experimental excitation functions were compared to the theoretical predictions calculated with the modified model codes ALICE-IPPE-D and EMPIRE-II-D and with the data in the TENDL-2012 library based on latest version of the TALYS code. The application of the data in the field of medical isotope production and nuclear reaction theory is discussed

  17. Activation cross-sections of deuteron induced nuclear reactions on neodymium up to 50 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Tárkányi, F.; Takács, S. [Institute for Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), Debrecen (Hungary); Ditrói, F., E-mail: ditroi@atomki.hu [Institute for Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), Debrecen (Hungary); Hermanne, A. [Cyclotron Laboratory, Vrije Universiteit Brussel (VUB), Brussels (Belgium); Yamazaki, H.; Baba, M.; Mohammadi, A. [Cyclotron Radioisotope Center (CYRIC), Tohoku University, Sendai (Japan); Ignatyuk, A.V. [Institute of Physics and Power Engineering (IPPE), Obninsk (Russian Federation)

    2014-04-01

    Highlights: • Experimental excitation function of deuteron induced reactions on natural Nd. • Model code calculations with EMPIRE-D, ALICE-D and TALYS (TENDL-2012). • Physical yield calculation and comparison. • Discussion of medical and industrial applications. - Abstract: In the frame of a systematic study of activation cross sections of deuteron induced nuclear reactions on rare earths, the reactions on neodymium for production of therapeutic radionuclides were measured for the first time. The excitation functions of the {sup nat}Nd(d,x) {sup 151,150,149,148m,148g,146,144,143}Pm, {sup 149,147,139m}Nd, {sup 142}Pr and {sup 139g}Ce nuclear reactions were assessed by using the stacked foil activation technique and high resolution γ-spectrometry. The experimental excitation functions were compared to the theoretical predictions calculated with the modified model codes ALICE-IPPE-D and EMPIRE-II-D and with the data in the TENDL-2012 library based on latest version of the TALYS code. The application of the data in the field of medical isotope production and nuclear reaction theory is discussed.

  18. Activation cross-sections of deuteron-induced nuclear reactions on natural iron up to 24 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin, E-mail: mu_khandaker@yahoo.com [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu; Kanaya, Jumpei [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan); Otuka, Naohiko [Nuclear Data Section, Division of Physical and Chemical Sciences, Department of Nuclear Sciences and Applications, International Atomic Energy Agency, A-1400 Vienna (Austria)

    2013-12-01

    Activation cross-sections of the {sup nat}Fe(d,x){sup 55,56,57,58g+m}Co, {sup 52g,54,56}Mn, {sup 51}Cr, {sup 59}Fe reactions were measured from their respective thresholds to 24 MeV via a stacked foil activation technique combined with HPGe γ-ray spectrometry. An overall good agreement is found with some of the earlier measurements, whereas partial agreements are obtained with the theoretical data extracted from the TENDL-2011 library. The present measurement reports four cross-sections of {sup 58g+m}Co, {sup 56}Mn and {sup 59}Fe radionuclides in the energy range of 20–24 MeV for the first time. Physical thick target yields deduced from the measured cross-sections are compared with the directly measured yields available in the literature. The measured {sup 58}Fe(d,p){sup 59}Fe cross section is underestimated by the original TENDL-2011 library while overestimated by the TENDL-2011 library renormalized by Ignatyuk for the FENDL-3 library.

  19. Investigation of activation cross-sections of alpha-induced nuclear reactions on natural cadmium

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Kim, Kwangsoo [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Lee, Manwoo [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Research Center, Dongnam Institute of Radiological and Medical Science, Busan 619-953 (Korea, Republic of); Kim, Guinyun, E-mail: gnkim@knu.ac.kr [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of)

    2014-08-15

    We measured production cross-sections of Sn, In, and Cd radionuclides from alpha-induced reactions on {sup nat}Cd from their respective threshold to 45 MeV by using a stacked-foil activation technique at the MC-50 cyclotron of the Korea Institute of Radiological and Medical Sciences. The results were compared with the earlier measurements as well as with the theoretical values obtained from the TENDL-2012 library based on the TALYS 1.4 code. Our measurements for the {sup 110,113g,117m}Sn, {sup 108m,108g,109g,110m,110g,111g,113m,114m,115m,116m,117m,117g}In, and {sup 111m,115g}Cd radionuclides in the energy region from the threshold energy to 45 MeV are in general good agreement with the other experimental data and calculated results. The integral yields for thick target were also deduced using the measured cross-sections and the stopping power of natural cadmium target and found in agreement with the directly measured yields available in the literature. The measured cross-sections find importance in various practical applications including nuclear medicine and improvement of nuclear model calculations.

  20. Investigation of activation cross-sections of alpha-induced nuclear reactions on natural cadmium

    International Nuclear Information System (INIS)

    Khandaker, Mayeen Uddin; Kim, Kwangsoo; Lee, Manwoo; Kim, Guinyun

    2014-01-01

    We measured production cross-sections of Sn, In, and Cd radionuclides from alpha-induced reactions on nat Cd from their respective threshold to 45 MeV by using a stacked-foil activation technique at the MC-50 cyclotron of the Korea Institute of Radiological and Medical Sciences. The results were compared with the earlier measurements as well as with the theoretical values obtained from the TENDL-2012 library based on the TALYS 1.4 code. Our measurements for the 110,113g,117m Sn, 108m,108g,109g,110m,110g,111g,113m,114m,115m,116m,117m,117g In, and 111m,115g Cd radionuclides in the energy region from the threshold energy to 45 MeV are in general good agreement with the other experimental data and calculated results. The integral yields for thick target were also deduced using the measured cross-sections and the stopping power of natural cadmium target and found in agreement with the directly measured yields available in the literature. The measured cross-sections find importance in various practical applications including nuclear medicine and improvement of nuclear model calculations

  1. Activation cross-sections on cadmium: Proton induced nuclear reactions up to 80 MeV

    International Nuclear Information System (INIS)

    Tarkanyi, F.; Kiraly, B.; Ditroi, F.; Takacs, S.; Csikai, J.; Hermanne, A.; Uddin, M.S.; Hagiwara, M.; Baba, M.; Ido, T.; Shubin, Yu.N.; Kovalev, S.F.

    2006-01-01

    Cross-sections of proton induced nuclear reactions on natural cadmium were measured up to 80 MeV using the standard stacked foil irradiation technique and high resolution gamma-ray spectroscopy. Experimental cross-sections and derived integral yields are reported for the nat Cd(p,xn) 107g,108m,108g,109g,110m,110g,111g,112m,113m,114m,115m,116m1 In, nat Cd(p,x) 107,109,111m,115g Cd and nat Cd(p,x) 104g,105g,106m,110m,111g,113g Ag reactions. Earlier experimental data measured on natural cadmium were found only for 109,110,111,113,114 In in the literature. The experimental data are analyzed and compared to the results of the theoretical model code ALICE-IPPE. Applications of the new cross-sections for data validation, medical radioisotope production, thin layer activation and dose calculation are discussed.

  2. Quality assurance techniques for activation analysis

    International Nuclear Information System (INIS)

    Becker, D.A.

    1984-01-01

    The principles and techniques of quality assurance are applied to the measurement method of activation analysis. Quality assurance is defined to include quality control and quality assessment. Plans for quality assurance include consideration of: personnel; facilities; analytical design; sampling and sample preparation; the measurement process; standards; and documentation. Activation analysis concerns include: irradiation; chemical separation; counting/detection; data collection, and analysis; and calibration. Types of standards discussed include calibration materials and quality assessment materials

  3. ACTIVE CYCLE BREATHING TECHNIQUES IN HEART FAILURE ...

    African Journals Online (AJOL)

    RICHY

    47. Pulmonary Function Responses to Active Cycle. Breathing Techniques in Heart Failure Patients at the. University Teaching Hospital (UTH), Lusaka, Zambia. 1. 1. 2. 3. Charity Kapenda Muselema *, Methuselah Jere , Gershom Chongwe , Fastone M. Goma. 1Ministry of Community Development Mother and Child Health, ...

  4. Active vibration control by robust control techniques

    International Nuclear Information System (INIS)

    Lohar, F.A.

    2001-01-01

    This paper studies active vibration control of multi-degree-of-freedom system. The control techniques considered are LTR, H/sup 2/ and H/sup infinite/. The results show that LTR controls the vibration but its respective settling time is higher than that of the other techniques. The control performance of H/sup infinite/ control is similar to that of H/sup 2/ control in the case of it weighting functions. However, H/sup infinite/ control is superior to H/sup 2/ control with respect to robustness, steady state error and settling time. (author)

  5. Active load control techniques for wind turbines.

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, C.P. (University of California, Davis, CA); Berg, Dale E.; Johnson, Scott J. (University of California, Davis, CA)

    2008-07-01

    This report provides an overview on the current state of wind turbine control and introduces a number of active techniques that could be potentially used for control of wind turbine blades. The focus is on research regarding active flow control (AFC) as it applies to wind turbine performance and loads. The techniques and concepts described here are often described as 'smart structures' or 'smart rotor control'. This field is rapidly growing and there are numerous concepts currently being investigated around the world; some concepts already are focused on the wind energy industry and others are intended for use in other fields, but have the potential for wind turbine control. An AFC system can be broken into three categories: controls and sensors, actuators and devices, and the flow phenomena. This report focuses on the research involved with the actuators and devices and the generated flow phenomena caused by each device.

  6. Extension of the energy range of experimental activation cross-sections data of deuteron induced nuclear reactions on indium up to 50MeV.

    Science.gov (United States)

    Tárkányi, F; Ditrói, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2015-11-01

    The energy range of our earlier measured activation cross-sections data of longer-lived products of deuteron induced nuclear reactions on indium were extended from 40MeV up to 50MeV. The traditional stacked foil irradiation technique and non-destructive gamma spectrometry were used. No experimental data were found in literature for this higher energy range. Experimental cross-sections for the formation of the radionuclides (113,110)Sn, (116m,115m,114m,113m,111,110g,109)In and (115)Cd are reported in the 37-50MeV energy range, for production of (110)Sn and (110g,109)In these are the first measurements ever. The experimental data were compared with the results of cross section calculations of the ALICE and EMPIRE nuclear model codes and of the TALYS 1.6 nuclear model code as listed in the on-line library TENDL-2014. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Applications of neutron activation analysis technique

    International Nuclear Information System (INIS)

    Jonah, S. A.

    2000-07-01

    The technique was developed as far back as 1936 by G. Hevesy and H. Levy for the analysis of Dy using an isotopic source. Approximately 40 elements can be analyzed by instrumental neutron activation analysis (INNA) technique with neutrons from a nuclear reactor. By applying radiochemical separation, the number of elements that can be analysed may be increased to almost 70. Compared with other analytical methods used in environmental and industrial research, NAA has some unique features. These are multi-element capability, rapidity, reproducibility of results, complementarity to other methods, freedom from analytical blank and independency of chemical state of elements. There are several types of neutron sources namely: nuclear reactors, accelerator-based and radioisotope-based sources, but nuclear reactors with high fluxes of neutrons from the fission of 235 U give the most intense irradiation, and hence the highest available sensitivities for NAA. In this paper, the applications of NAA of socio-economic importance are discussed. The benefits of using NAA and related nuclear techniques for on-line applications in industrial process control are highlighted. A brief description of the NAA set-ups at CERT is enumerated. Finally, NAA is compared with other leading analytical techniques

  8. Suitable activated carbon-13 tracer techniques

    International Nuclear Information System (INIS)

    Zhang Weicheng; Peng Xiuru; Wang Yuhua

    1995-12-01

    Feasibility and applicability studies of the proton induced gamma ray emission (PIGE) have been performed. The graphite was firstly bombarded at various proton energies to determine gamma ray yield (and, thus, sensitivities) for the reaction of interest. The accuracy for the determination of 13 C abundance was checked, and the precision with which this value and ratios 13 C/ 12 C may be obtained was established by repetitive analysis samples. The performance of different standards in this determination was assessed. The mathematical treatment was developed for the determination of 13 C abundance in tracer studies, and to derive the equations that govern this method of analysis from first principles, to arrive finally at a simple expression by virtue of the observed regularities. The system was calibrated by measuring the gamma ray yield form the 12 C (p, γ) 13 N and 13 C(p,γ) 14 N reaction as a function of known 13 C enrichment. Using this experimentally determined calibration curve, unknown materials can be assayed. This technique is applicable to the analysis of samples with 13 C enrichments between 0.1% and 90%. The samples of human breath natural samples were analyzed against graphite and Cylinder CO 2 standards. Relative standard deviations were 13 C abundance, an increase in 13 C per cent isotopic abundance from the natural 1.11% (average) to only 1.39% may be ascertained. Finally, PIGE is compared with more classical techniques for analysis of 13 C tracer experiments. Ease and speed are important advantages of this technique over mass spectrometry, and its error is compatible with the natural variation of biological results. (9 refs., 11 figs., 9 tabs.)

  9. A novel technique for active vibration control, based on optimal

    Indian Academy of Sciences (India)

    In the last few decades, researchers have proposed many control techniques to suppress unwanted vibrations in a structure. In this work, a novel and simple technique is proposed for the active vibration control. In this technique, an optimal tracking control is employed to suppress vibrations in a structure by simultaneously ...

  10. Respirometry techniques and activated sludge models

    NARCIS (Netherlands)

    Benes, O.; Spanjers, H.; Holba, M.

    2002-01-01

    This paper aims to explain results of respirometry experiments using Activated Sludge Model No. 1. In cases of insufficient fit of ASM No. 1, further modifications to the model were carried out and the so-called "Enzymatic model" was developed. The best-fit method was used to determine the effect of

  11. Opportunities to Create Active Learning Techniques in the Classroom

    Science.gov (United States)

    Camacho, Danielle J.; Legare, Jill M.

    2015-01-01

    The purpose of this article is to contribute to the growing body of research that focuses on active learning techniques. Active learning techniques require students to consider a given set of information, analyze, process, and prepare to restate what has been learned--all strategies are confirmed to improve higher order thinking skills. Active…

  12. Investigation of (α,xn) reactions on natural indium

    International Nuclear Information System (INIS)

    Shah, D.J.; Patel, H.B.; Singh, N.L.; Somayajulu, D.R.S.; Chintalapudi, S.N.

    1997-01-01

    Excitation functions of the reactions 115 In(α,n) 118m In 115 In(α,2n) 117 In and [ 115 In(α,3n)+ 113 In(α,n)] 116m In were measured up to 50 MeV using stacked foil activation technique and γ-rays spectroscopy method

  13. Excitation functions for 197Au (d, p)198Au, 197Au(d, 2n)197mHg, 197Au(d, 2n)197Hg and 197Au(d, p2n)196Au

    International Nuclear Information System (INIS)

    Long Xianguan; Peng Xiufeng; He Fuqing

    1987-01-01

    By using activation method and stack-foil technique, the excitation functions for d + 197 Au reaction in 6.6-13.1 MeV energy range are measured. The measured values are compared with previous results and theoretical calculations

  14. Investigation of activation cross-sections of deuteron induced nuclear reactions on natural Mo up to 50 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Tarkanyi, F. [Institute of Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); Ditroi, F., E-mail: ditroi@atomki.hu [Institute of Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); Takacs, S.; Kiraly, B. [Institute of Nuclear Research of the Hungarian Academy of Sciences (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); Hermanne, A. [Cyclotron Laboratory, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090 Brussels (Belgium); Sonck, M. [Federal Agency for Nuclear Control, Ravenstein 36, 1000 Brussels (Belgium); Baba, M. [Cyclotron and Radioisotope Center (CYRIC), Tohoku University, Sendai 980-8578 (Japan); Ignatyuk, A.V. [Institute of Physics and Power Engineering (IPPE), Obninsk 249020 (Russian Federation)

    2012-03-01

    Highlights: Black-Right-Pointing-Pointer Excitation function measurement of deuteron induced reactions on molybdenum up to 50 MeV. Black-Right-Pointing-Pointer Model code calculations with EMPIRE-D, ALICE-D and TALYS. Black-Right-Pointing-Pointer Integral production yield calculation. Black-Right-Pointing-Pointer Medical radioisotope production; {sup 99m}Tc and {sup 99}Mo. - Abstract: Cross-sections of deuteron induced nuclear reactions on natural molybdenum have been studied in the frame of a systematic investigation of charged particle induced nuclear reactions on metals for different applications. The excitation functions of {sup 93,94g,94m,95g,95m,96,99m}Tc, {sup 90,93m,99}Mo, {sup 90,91m,92m,95m,95g,96}Nb and {sup 88,89}Zr were measured up to 50 MeV deuteron energy by using the stacked foil technique and activation method. The goal of this work was first of all to study the production possibility of the medically important {sup 99m}Tc, and its {sup 99}Mo parent, to get experimental data useful in accelerator technology, and for testing nuclear reaction theories. The thick target yields and production possibilities of {sup 99m}Tc and {sup 99}Mo were estimated up to 50 MeV deuteron energy, and it is shown that besides the proton induced reactions, deuteron induced reactions on enriched molybdenum target seem to be promising. For most of the reaction products published experimental data for excitation functions are available only up to 20 MeV, and our new values confirm and extend the dataset. The experimental data were compared with the results of model calculations obtained by using ALICE-IPPE-D, EMPIRE-II-D and two versions of the TALYS code resulting in moderate agreement.

  15. Effect of active learning techniques on students' choice of approach ...

    African Journals Online (AJOL)

    The purpose of this article is to report on empirical work, related to a techniques module, undertaken with the dental students of the University of the Western Cape, South Africa. I will relate how a range of different active learning techniques (tutorials; question papers and mock tests) assisted students to adopt a deep ...

  16. Active cycle of breathing technique for cystic fibrosis.

    Science.gov (United States)

    Mckoy, Naomi A; Wilson, Lisa M; Saldanha, Ian J; Odelola, Olaide A; Robinson, Karen A

    2016-07-05

    People with cystic fibrosis experience chronic airway infections as a result of mucus build up within the lungs. Repeated infections often cause lung damage and disease. Airway clearance therapies aim to improve mucus clearance, increase sputum production, and improve airway function. The active cycle of breathing technique (also known as ACBT) is an airway clearance method that uses a cycle of techniques to loosen airway secretions including breathing control, thoracic expansion exercises, and the forced expiration technique. This is an update of a previously published review. To compare the clinical effectiveness of the active cycle of breathing technique with other airway clearance therapies in cystic fibrosis. We searched the Cochrane Cystic Fibrosis Trials Register, compiled from electronic database searches and handsearching of journals and conference abstract books. We also searched the reference lists of relevant articles and reviews.Date of last search: 25 April 2016. Randomised or quasi-randomised controlled clinical studies, including cross-over studies, comparing the active cycle of breathing technique with other airway clearance therapies in cystic fibrosis. Two review authors independently screened each article, abstracted data and assessed the risk of bias of each study. Our search identified 62 studies, of which 19 (440 participants) met the inclusion criteria. Five randomised controlled studies (192 participants) were included in the meta-analysis; three were of cross-over design. The 14 remaining studies were cross-over studies with inadequate reports for complete assessment. The study size ranged from seven to 65 participants. The age of the participants ranged from six to 63 years (mean age 22.33 years). In 13 studies, follow up lasted a single day. However, there were two long-term randomised controlled studies with follow up of one to three years. Most of the studies did not report on key quality items, and therefore, have an unclear risk of

  17. Active noise control technique and its application on ships

    Directory of Open Access Journals (Sweden)

    CHEN Kean

    2017-08-01

    Full Text Available Due to the rapid development during past three decades, Active Noise Control(ANC has become a highly complementary noise control approach in comparison with traditional approaches, and has formed a complete system including basic theory, investigation approach, key techniques and system implementation. Meanwhile, substantial progress has been achieved in such fields as the practical application, industrialization development and commercial popularization of ANC, and this developed technique provides a practical and feasible choice for the active control of ship noise. In this review paper, its sound field analysis, system setup and key techniques are summarized, typical examples of ANC-based engineering applications including control of cabin noise and duct noise are briefly described, and a variety of forefronts and problems associated with the applications of ANC in ship noise control, such as active sound absorption, active sound insulation and smart acoustic structure, are subsequently discussed.

  18. Activation volume measurement techniques: application to Zircaloy-4

    International Nuclear Information System (INIS)

    Cuniberti, A.; Picasso, A.

    2001-01-01

    Stress relaxation and strain rate change tests were performed in Zircaloy-4 at room temperature. The apparent and effective activation volumes were determined and the results obtained by the different techniques are compared. The stress dependence of activation volumes is studied in a broad range of stresses, and an analysis is made in the light of the thermal activation theory. The results suggest that plasticity is ruled by the overcoming of Peierls barriers. (orig.)

  19. Active structural control with stable fuzzy PID techniques

    CERN Document Server

    Yu, Wen

    2016-01-01

    This book presents a detailed discussion of intelligent techniques to measure the displacement of buildings when they are subjected to vibration. It shows how these techniques are used to control active devices that can reduce vibration 60–80% more effectively than widely used passive anti-seismic systems. After introducing various structural control devices and building-modeling and active structural control methods, the authors propose offset cancellation and high-pass filtering techniques to solve some common problems of building-displacement measurement using accelerometers. The most popular control algorithms in industrial settings, PD/PID controllers, are then analyzed and then combined with fuzzy compensation. The stability of this combination is proven with standard weight-training algorithms. These conditions provide explicit methods for selecting PD/PID controllers. Finally, fuzzy-logic and sliding-mode control are applied to the control of wind-induced vibration. The methods described are support...

  20. First fusion proton measurements in TEXTOR plasmas using activation technique

    Energy Technology Data Exchange (ETDEWEB)

    Bonheure, G.; Wassenhove, G. Van [ERM-KMS, Trilateral Euregio Cluster, B-1000 Brussels (Belgium); Mlynar, J. [Association Euratom-IPP.CR, Institute of Plasma Physics AS CR, v.v.i., Za Slovankou 3, CZ-182 00 Praha 8 (Czech Republic); Hult, M.; Gonzalez de Orduna, R.; Lutter, G. [Institute for Reference Materials and Measurements (IRMM), Retieseweg 111, B-2440 Geel (Belgium); Vermaercke, P. [SCK-CEN, Boeretang, B-2400 Mol (Belgium); Huber, A.; Schweer, B.; Esser, G.; Biel, W. [Forschungszentrum Juelich GmbH, Institut fuer Plasmaphysik, EURATOM-Assoziation, Trilateral Euregio Cluster, D-52425 Juelich (Germany)

    2012-10-15

    MeV particle loss measurements from fusion plasmas, in particular alpha particles, remain difficult in large fusion devices and further R and D is needed for ITER. This paper describes the first attempt to measure 3 MeV escaping fusion protons emitted from TEXTOR tokamak plasmas using activation technique. This technique was successfully demonstrated, initially, in 2006 on the JET tokamak. An ion camera equipped with a collimator and several types of activation detectors was installed inside the TEXTOR vacuum vessel to perform these measurements. After irradiation, the detectors were analyzed using ultra low level gamma-ray spectrometry at the HADES underground laboratory. 3 MeV escaping fusion protons were detected in larger number -{approx}6 times more - compared to earlier measurements using this technique on JET. Another major progress was the reduction of the cooling time by a factor of 50, which made possible to detect radionuclides with half-life of less than 90 min.

  1. Weed Identification Using An Automated Active Shape Matching (AASM) Technique

    DEFF Research Database (Denmark)

    Swain, K C; Nørremark, Michael; Jørgensen, R N

    2011-01-01

    on the concept of ‘active shape modelling’ to identify weed and crop plants based on their morphology. The automated active shape matching system (AASM) technique consisted of, i) a Pixelink camera ii) an LTI (Lehrstuhlfuer technische informatik) image processing library, iii) a laptop pc with the Linux OS. A 2......-leaf growth stage model for Solanum nigrum L. (nightshade) is generated from 32 segmented training images in Matlab software environment. Using the AASM algorithm, the leaf model was aligned and placed at the centre of the target plant and a model deformation process carried out. The parameters used......Weed identification and control is a challenge for intercultural operations in agriculture. As an alternative to chemical pest control, a smart weed identification technique followed by mechanical weed control system could be developed. The proposed smart identification technique works...

  2. Introduction to Microwave Active Techniques and Backscatter Properties

    NARCIS (Netherlands)

    Hoogeboom, P.; Lidicky, L.

    2008-01-01

    The present article introduces active microwave techniques that are used for remote sensing of the European seas, focusing on RAdio Detection And Ranging (RADAR) and Synthetic Aperture Radar (SAR). In section 1 the ranging principle and associated topics are introduced. As an example of this

  3. Idea-Generation Techniques: A Formulary of Active Ingredients.

    Science.gov (United States)

    Smith, Gerald F.

    1998-01-01

    Reports the results of a study of active ingredients of creativity techniques, devices that promote idea generation, through an analysis of 172 idea-generation methods which identified three types of idea-generation devices--strategies, tactics, and enablers. These devices were organized into meaningful categories comprising a formulary of active…

  4. Practical applications of activation analysis and other nuclear techniques

    International Nuclear Information System (INIS)

    Neeutron activation analysis (NAA) is a versatile, sensitive multielement, usually nondestructive analytical technique used to determine elemental concentrations in a variety of materials. Samples are irradiated with neutrons in a nuclear reactor, removed, and for the nondestructive technique, the induced radioactivity measured. This measurement of γ rays emitted from specific radionuclides makes possible the quantitative determination of elements present. The method is described, advantages and disadvantages listed and a number of examples of its use given. Two other nuclear methods, particle induced x-ray emission and synchrotron produced x-ray fluorescence are also briefly discussed

  5. Root activity evaluation in tree crops using isotopic techniques

    International Nuclear Information System (INIS)

    Calvache, Marcelo

    1991-01-01

    This paper discusses the methdology used to evalute root activity of the crops utilizing the technique of soil injection with solutions marked with isotopes. Some of the experimental data obtained with coffee, citrus and oil palm are also presented. Ovel all, these tree crops present a higher root activity in soil layers close to the surface (0-20 cm) and to a distance from the trunk which varies with age, season and variety. The most important conclusions are: 1. The isotope injection technique using 3 2 P , 1 5 N , or 8 5 R b, allow direct and reliable determination of root activity in these tree crops. 2. Root activity of three crops depends on age of the tree, variety, moisture content of the soil and soil type. 3. Soil moisture is the most influencial factor affecting root activity. This is turn depends on the irrigation method employed. 4. From the practical view point, the best distance from the trunk to apply fertilizer in the one wich has highest root activity closest to the soil surface

  6. Some problems of calibration technique in charged particle activation analysis

    International Nuclear Information System (INIS)

    Krasnov, N.N.; Zatolokin, B.V.; Konstantinov, I.O.

    1977-01-01

    It is shown that three different approaches to calibration technique based on the use of average cross-section, equivalent target thickness and thick target yield are adequate. Using the concept of thick target yield, a convenient charged particle activation equation is obtained. The possibility of simultaneous determination of two impurities, from which the same isotope is formed, is pointed out. The use of the concept of thick target yield facilitates the derivation of a simple formula for an absolute and comparative methods of analysis. The methodical error does not exceed 10%. Calibration technique and determination of expected sensitivity based on the thick target yield concept is also very convenient because experimental determination of thick target yield values is a much simpler procedure than getting activation curve or excitation function. (T.G.)

  7. Comparison of active stretching technique and static stretching technique on hamstring flexibility.

    Science.gov (United States)

    Meroni, Roberto; Cerri, Cesare Giuseppe; Lanzarini, Carlo; Barindelli, Guido; Morte, Giancesare Della; Gessaga, Viviana; Cesana, Gian Carlo; De Vito, Giovanni

    2010-01-01

    To compare a passive and an active stretching technique to determine which one would produce and maintain the greatest gain in hamstring flexibility. To determine whether a passive or an active stretching technique results in a greater increase in hamstring flexibility and to compare whether the gains are maintained. Randomized controlled trial. Institutional. Sixty-five volunteer healthy subjects completed the enrollment questionnaire, 33 completed the required 75% of the treatment after 6 weeks, and 22 were assessed 4 weeks after the training interruption. A 6-week stretching program with subjects divided into 2 groups with group 1 performing active stretching exercises and group 2 performing passive stretching exercises. Range of motion (ROM) was measured after 3 and 6 weeks of training and again 4 weeks after the cessation of training and compared with the initial measurement. After 3 weeks of training, the mean gain in group 1 (active stretching) on performing the active knee extension range of motion (AKER) test was 5.7 degrees, whereas the mean gain in group 2 (passive stretching) was 3 degrees (P = .015). After 6 weeks of training, the mean gain in group 1 was 8.7 degrees , whereas the mean gain in group 2 was 5.3 degrees (P = .006). Twenty-two subjects were reassessed 4 weeks after the cessation of the training with the maintained gain of ROM in group 1 being 6.3 degrees , whereas the maintained gain in group 2 was 0.1 degrees (P = .003). Active stretching produced the greater gain in the AKER test, and the gain was almost completely maintained 4 weeks after the end of the training, which was not seen with the passive stretching group. Active stretching was more time efficient compared with the static stretching and needed a lower compliance to produce effects on flexibility.

  8. Fusion alpha loss diagnostic for ITER using activation technique

    Czech Academy of Sciences Publication Activity Database

    Bonheure, G.; Hult, M.; González de Orduña, R.; Vermaercke, P.; Murari, A.; Popovichev, S.; Mlynář, Jan

    2011-01-01

    Roč. 86, 6-8 (2011), s. 1298-1301 ISSN 0920-3796. [Symposium on Fusion Technology (SOFT) /26th./. Port o, 27.09.2010-01.10.2010] Institutional research plan: CEZ:AV0Z20430508 Keywords : ITER * fusion product * burning plasma diagnostics * alpha losses * activation technique Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 1.490, year: 2011 http://www.sciencedirect.com/science/article/pii/S0920379611002778

  9. Nuclear Activation Techniques in the Life Sciences. Proceedings of the Symposium on Nuclear Activation Techniques in the Life Sciences

    International Nuclear Information System (INIS)

    1967-01-01

    Proceedings of a Symposium organized by the IAEA and held at Amsterdam. 8-12 May 1967. The meeting was attended by 190 participants from 26 Member States and 3 international organizations. These are the third IAEA Symposium Proceedings to have nuclear activation analysis as their main theme, the preceding ones being Radioactivation Analysis, Butterworth and Co. Ltd, London (1960) and Radiochemical Methods of Analysis, IAEA, Vienna (1965). Contents: Introductory lecture (1 paper); Physical techniques (6 papers); Chemical techniques (6 papers); Analytical reference materials (1 paper); Comparison of activation analysis with other methods of trace analysis (4 papers); Plant and animal studies (7 papers); Medical sciences (19 papers); Public health and forensic science (6 papers). Each paper is in its original language (43 English, 5 French, 1 Russian and 1 Spanish) and is preceded by an abstract in English with one in the original language if this is not English. Discussions are in English. (author)

  10. Aseptic minimum volume vitrification technique for porcine parthenogenetically activated blastocyst.

    Science.gov (United States)

    Lin, Lin; Yu, Yutao; Zhang, Xiuqing; Yang, Huanming; Bolund, Lars; Callesen, Henrik; Vajta, Gábor

    2011-01-01

    Minimum volume vitrification may provide extremely high cooling and warming rates if the sample and the surrounding medium contacts directly with the respective liquid nitrogen and warming medium. However, this direct contact may result in microbial contamination. In this work, an earlier aseptic technique was applied for minimum volume vitrification. After equilibration, samples were loaded on a plastic film, immersed rapidly into factory derived, filter-sterilized liquid nitrogen, and sealed into sterile, pre-cooled straws. At warming, the straw was cut, the filmstrip was immersed into a 39 degree C warming medium, and the sample was stepwise rehydrated. Cryosurvival rates of porcine blastocysts produced by parthenogenetical activation did not differ from control, vitrified blastocysts with Cryotop. This approach can be used for minimum volume vitrification methods and may be suitable to overcome the biological dangers and legal restrictions that hamper the application of open vitrification techniques.

  11. Electrophysiological Techniques for Studying Synaptic Activity In Vivo.

    Science.gov (United States)

    Jeggo, Ross; Zhao, Fei-Yue; Spanswick, David

    2014-03-03

    Understanding the physiology, pharmacology, and plasticity associated with synaptic function is a key goal of neuroscience research and is fundamental to identifying the processes involved in the development and manifestation of neurological disease. A diverse range of electrophysiological methodologies are used to study synaptic function. Described in this unit is a technique for recording electrical activity from a single component of the central nervous system that is used to investigate pre- and post-synaptic elements of synaptic function. A strength of this technique is that it can be used on live animals, although the effect of anesthesia must be taken into consideration when interpreting the results. This methodology can be employed not only in naïve animals for studying normal physiological synaptic function, but also in a variety of disease models, including transgenic animals, to examine dysfunctional synaptic plasticity associated with neurological pathologies. Copyright © 2013 John Wiley & Sons, Inc. All rights reserved.

  12. Pulsed neutron generator for use with pulsed neutron activation techniques

    International Nuclear Information System (INIS)

    Rochau, G.E.

    1980-01-01

    A high-output, transportable, pulsed neutron generator has been developed by Sandia National Laboratories for use with Pulsed Neutron Activation (PNA) techniques. The PNA neutron generator generates > 10 10 14 MeV D-T neutrons in a 1.2 millisecond pulse. Each operation of the unit will produce a nominal total neutron output of 1.2 x 10 10 neutrons. The generator has been designed to be easily repaired and modified. The unit requires no additional equipment for operation or measurement of output

  13. Characterizing root activity of guava trees by radiotracer technique

    International Nuclear Information System (INIS)

    Purohit, A.G.; Mukherjee, S.K.

    1974-01-01

    The distribution pattern of root activity of 12-year-old trees of guava (Psidium guajava L.) was determined by radiotracer technique. 32 P soloution was injected into the soil at lateral distances of 120, 240 and 360 cm from the tree trunk at depths of 15,30,60 and 90 cm. The 32 P uptake by the tree was determined by leaf analysis. In the rainy season the root activity or 32 P uptake was greater near the soil surface and midway between the trunk and the drip-line. The root activity decreased with an increase in the depth and distance from trunk. These results compared well with the actual distribution of feeder roots as determined by the soil-auger method. In summer the roots near the surface become less active in 32 P absorption with a drcrease in surface soil moisture. A decrease in the root activity in the surface soil was accompanied by an increase in 32 P uptake from lower depths. (author)

  14. Detection of uranium enrichment activities using environmental monitoring techniques

    International Nuclear Information System (INIS)

    Belew, W.L.; Carter, J.A.; Smith, D.H.; Walker, R.L.

    1993-01-01

    Uranium enrichment processes have the capability of producing weapons-grade material in the form of highly enriched uranium. Thus, detection of undeclared uranium enrichment activities is an international safeguards concern. The uranium separation technologies currently in use employ UF 6 gas as a separation medium, and trace quantities of enriched uranium are inevitably released to the environment from these facilities. The isotopic content of uranium in the vegetation, soil, and water near the plant site will be altered by these releases and can provide a signature for detecting the presence of enriched uranium activities. This paper discusses environmental sampling and analytical procedures that have been used for the detection of uranium enrichment facilities and possible safeguards applications of these techniques

  15. Detection of uranium enrichment activities using environmental monitoring techniques

    Energy Technology Data Exchange (ETDEWEB)

    Belew, W.L.; Carter, J.A.; Smith, D.H.; Walker, R.L.

    1993-03-30

    Uranium enrichment processes have the capability of producing weapons-grade material in the form of highly enriched uranium. Thus, detection of undeclared uranium enrichment activities is an international safeguards concern. The uranium separation technologies currently in use employ UF{sub 6} gas as a separation medium, and trace quantities of enriched uranium are inevitably released to the environment from these facilities. The isotopic content of uranium in the vegetation, soil, and water near the plant site will be altered by these releases and can provide a signature for detecting the presence of enriched uranium activities. This paper discusses environmental sampling and analytical procedures that have been used for the detection of uranium enrichment facilities and possible safeguards applications of these techniques.

  16. WHO activities in teaching radioimmunoassay and related techniques

    International Nuclear Information System (INIS)

    Goncharov, N.P.; Sufi, S.B.; Donaldson, A.; Jeffcoate, S.L.

    1986-01-01

    The Special Programme of Research, Development and Research Training in Human Reproduction of the World Health Organization has recognized from its beginning that training is a key component of its activities, including its immunoassay standardization programme. Since the start of the Special Programme more than 250 scientists have received training in RIA and related procedures and 27 training courses have been held in various countries. Many of the courses have been held in collaboration with the International Atomic Energy Agency, and these co-operative activities have established a core of scientific expertise worldwide which has contributed to the increased availability of modern diagnostic techniques in many countries. The increasing number of medical and non-medical applications of immunoassays and the special expertise required for some immunoassay methods create a continuing demand for training in RIA techniques. Both WHO and the IAEA have responded by organizing courses to 'train the trainers' and by supporting national and regional courses based on centrally provided material, as well as by commissioning the production of additional teaching documents and audio-visual aids in English and Spanish. It is envisaged that such materials, complete with centrally provided materials for practicals and other teaching aids, will be made available to national reagent programmes and will be used in the future as a well characterized, standardized core around which local organizers can construct training programmes geared to local needs and drawing upon local experience. (author)

  17. A study of excitation functions for the radio-active isotopes produced by α-induced reactions in gold

    International Nuclear Information System (INIS)

    Singh, B.P.; Prasad, R.; Bhardwaj, H.D.

    1992-04-01

    Excitation functions for the reactions 197 Au(α,xn) 201-x Tl(x=1-4) have been measured in the energy range approx. 30-60 MeV using stacked foil technique. Ge(Li) gamma ray spectroscopy has been used for the analysis of irradiated samples. Excitation functions have also been calculated theoretically using two different computer codes (ACT and ALICE) with and without the inclusion of pre-equilibrium emission. As expected inclusion of pre-equilibrium emission to the compound nucleon calculations agree well with the experimentally measured excitation functions. An interesting trend in pre-equilibrium fraction with energy has been observed. (author). 33 refs, 6 figs

  18. Teaching Computational Geophysics Classes using Active Learning Techniques

    Science.gov (United States)

    Keers, H.; Rondenay, S.; Harlap, Y.; Nordmo, I.

    2016-12-01

    We give an overview of our experience in teaching two computational geophysics classes at the undergraduate level. In particular we describe The first class is for most students the first programming class and assumes that the students have had an introductory course in geophysics. In this class the students are introduced to basic Matlab skills: use of variables, basic array and matrix definition and manipulation, basic statistics, 1D integration, plotting of lines and surfaces, making of .m files and basic debugging techniques. All of these concepts are applied to elementary but important concepts in earthquake and exploration geophysics (including epicentre location, computation of travel time curves for simple layered media plotting of 1D and 2D velocity models etc.). It is important to integrate the geophysics with the programming concepts: we found that this enhances students' understanding. Moreover, as this is a 3 year Bachelor program, and this class is taught in the 2nd semester, there is little time for a class that focusses on only programming. In the second class, which is optional and can be taken in the 4th or 6th semester, but often is also taken by Master students we extend the Matlab programming to include signal processing and ordinary and partial differential equations, again with emphasis on geophysics (such as ray tracing and solving the acoustic wave equation). This class also contains a project in which the students have to write a brief paper on a topic in computational geophysics, preferably with programming examples. When teaching these classes it was found that active learning techniques, in which the students actively participate in the class, either individually, in pairs or in groups, are indispensable. We give a brief overview of the various activities that we have developed when teaching theses classes.

  19. Active Learning Techniques Applied to an Interdisciplinary Mineral Resources Course.

    Science.gov (United States)

    Aird, H. M.

    2015-12-01

    An interdisciplinary active learning course was introduced at the University of Puget Sound entitled 'Mineral Resources and the Environment'. Various formative assessment and active learning techniques that have been effective in other courses were adapted and implemented to improve student learning, increase retention and broaden knowledge and understanding of course material. This was an elective course targeted towards upper-level undergraduate geology and environmental majors. The course provided an introduction to the mineral resources industry, discussing geological, environmental, societal and economic aspects, legislation and the processes involved in exploration, extraction, processing, reclamation/remediation and recycling of products. Lectures and associated weekly labs were linked in subject matter; relevant readings from the recent scientific literature were assigned and discussed in the second lecture of the week. Peer-based learning was facilitated through weekly reading assignments with peer-led discussions and through group research projects, in addition to in-class exercises such as debates. Writing and research skills were developed through student groups designing, carrying out and reporting on their own semester-long research projects around the lasting effects of the historical Ruston Smelter on the biology and water systems of Tacoma. The writing of their mini grant proposals and final project reports was carried out in stages to allow for feedback before the deadline. Speakers from industry were invited to share their specialist knowledge as guest lecturers, and students were encouraged to interact with them, with a view to employment opportunities. Formative assessment techniques included jigsaw exercises, gallery walks, placemat surveys, think pair share and take-home point summaries. Summative assessment included discussion leadership, exams, homeworks, group projects, in-class exercises, field trips, and pre-discussion reading exercises

  20. Measurement of activation cross-section of long-lived products in deuteron induced nuclear reactions on palladium in the 30-50MeV energy range.

    Science.gov (United States)

    Ditrói, F; Tárkányi, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2017-10-01

    Excitation functions were measured in the 31-49.2MeV energy range for the nat Pd(d,xn) 111,110m,106m,105,104g,103 Ag, nat Pd(d,x) 111m,109,101,100 Pd, nat Pd(d,x), 105,102m,102g,101m,101g,100,99m,99g Rh and nat Pd(d,x) 103,97 Ru nuclear reactions by using the stacked foil irradiation technique. The experimental results are compared with our previous results and with the theoretical predictions calculated with the ALICE-D, EMPIRE-D and TALYS (TENDL libraries) codes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Elemental analysis of brazing alloy samples by neutron activation technique

    International Nuclear Information System (INIS)

    Eissa, E.A.; Rofail, N.B.; Hassan, A.M.; El-Shershaby, A.; Walley El-Dine, N.

    1996-01-01

    Two brazing alloy samples (C P 2 and C P 3 ) have been investigated by Neutron activation analysis (NAA) technique in order to identify and estimate their constituent elements. The pneumatic irradiation rabbit system (PIRS), installed at the first egyptian research reactor (ETRR-1) was used for short-time irradiation (30 s) with a thermal neutron flux of 1.6 x 10 1 1 n/cm 2 /s in the reactor reflector, where the thermal to epithermal neutron flux ratio is 106. Long-time irradiation (48 hours) was performed at reactor core periphery with thermal neutron flux of 3.34 x 10 1 2 n/cm 2 /s, and thermal to epithermal neutron flux ratio of 79. Activation by epithermal neutrons was taken into account for the (1/v) and resonance neutron absorption in both methods. A hyper pure germanium detection system was used for gamma-ray acquisitions. The concentration values of Al, Cr, Fe, Co, Cu, Zn, Se, Ag and Sb were estimated as percentages of the sample weight and compared with reported values. 1 tab

  2. Tracing salmon to their birthplace by activable tracer technique

    International Nuclear Information System (INIS)

    Shibuya, Masao

    1978-01-01

    Activable tracer technique was applied to trace the recurrent migration of white salmons, as a typical example of employing radioactivation analysis to the study of agricultural and marinefields. Europium was adopted because it is easy to use technically with less influence on fish body and easy to detect, and its remaining time is very long. Artificially hatched young white salmons were stocked in the Saibetsu River after being raised for a month with europium-containing feed. These stocked fish were labeled by fin-cutting method. Recurrent salmons (fin cutting-labeled fish) were then collected and dissected. The fishes were divided into otoliths, scales, flesh, internal organs, gills, bones, etc., and irradiated for 5 min in JRR-2 reactor of Japan Atomic Energy Research Institute. Europium was detected from the scales and otoliths of 3 to 4 year stocked adult fishes by γ-spectrometry of Eu. This proved the availability of activable tracer method for tracing the recurrent migration of salmons. (Kobatake, H.)

  3. Active sampling technique to enhance chemical signature of buried explosives

    Science.gov (United States)

    Lovell, John S.; French, Patrick D.

    2004-09-01

    Deminers and dismounted countermine engineers commonly use metal detectors, ground penetrating radar and probes to locate mines. Many modern landmines have a very low metal content, which severely limits the effectiveness of metal detectors. Canines have also been used for landmine detection for decades. Experiments have shown that canines smell the explosives which are known to leak from most types of landmines. The fact that dogs can detect landmines indicates that vapor sensing is a viable approach to landmine detection. Several groups are currently developing systems to detect landmines by "sniffing" for the ultra-trace explosive vapors above the soil. The amount of material that is available to passive vapor sensing systems is limited to no more than the vapor in equilibrium with the explosive related chemicals (ERCs) distributed in the surface soils over and near the landmine. The low equilibrium vapor pressure of TNT in the soil/atmosphere boundary layer and the limited volume of the boundary layer air imply that passive chemical vapor sensing systems require sensitivities in the picogram range, or lower. ADA is working to overcome many of the limitations of passive sampling methods, by the use of an active sampling method that employs a high-powered (1,200+ joules) strobe lamp to create a highly amplified plume of vapor and/or ERC-bearing fine particulates. Initial investigations have demonstrated that this approach can amplify the detectability of TNT by two or three orders of magnitude. This new active sampling technique could be used with any suitable explosive sensor.

  4. Isomeric cross section ratios in 55Mn(α, n)58m,gCo reaction

    International Nuclear Information System (INIS)

    Long Xianguan; He Fuqing; Peng Xiufen; Liu Mantian

    1989-01-01

    The isomeric cross section ratios in 55 Mn(α, n) 58m,g Co reaction are measured for incident alpha-particle energies ranging from 10.4 to 26.5 MeV by using activation method and stacked-foil technique. The measured values are compared with theoretical calculations performed by using Huizenga and Vandenbosch method and the values of spin cutoff factor are obtained for product nucleus 58 Co

  5. Evaluation of nuclear reactor based activation analysis techniques

    International Nuclear Information System (INIS)

    Obrusnik, I.; Kucera, J.

    1977-09-01

    A survey is presented of the basic types of activation analysis applied in environmental control. Reactor neutron activation analysis is described (including the reactor as a neutron source, sample activation in the reactor, methodology of neutron activation analysis, sample transport into the reactor and sample packaging after irradiation, instrumental activation analysis with radiochemical separation, data measurement and evaluation, sampling and sample preparation). Sources of environmental contamination with trace elements, sampling and sample analysis by neutron activation are described. The analysis is described of soils, waters and biological materials. Methods are shown of evaluating neutron activation analysis results and of their interpretation for purposes of environmental control. (J.B.)

  6. Extension of the energy range of the experimental activation cross-sections data of longer-lived products of proton induced nuclear reactions on dysprosium up to 65MeV.

    Science.gov (United States)

    Tárkányi, F; Ditrói, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2015-04-01

    Activation cross-sections data of longer-lived products of proton induced nuclear reactions on dysprosium were extended up to 65MeV by using stacked foil irradiation and gamma spectrometry experimental methods. Experimental cross-sections data for the formation of the radionuclides (159)Dy, (157)Dy, (155)Dy, (161)Tb, (160)Tb, (156)Tb, (155)Tb, (154m2)Tb, (154m1)Tb, (154g)Tb, (153)Tb, (152)Tb and (151)Tb are reported in the 36-65MeV energy range, and compared with an old dataset from 1964. The experimental data were also compared with the results of cross section calculations of the ALICE and EMPIRE nuclear model codes and of the TALYS nuclear reaction model code as listed in the latest on-line libraries TENDL 2013. Copyright © 2015. Published by Elsevier Ltd.

  7. Not another boring lecture: engaging learners with active learning techniques.

    Science.gov (United States)

    Wolff, Margaret; Wagner, Mary Jo; Poznanski, Stacey; Schiller, Jocelyn; Santen, Sally

    2015-01-01

    Core content in Emergency Medicine Residency Programs is traditionally covered in didactic sessions, despite evidence suggesting that learners do not retain a significant portion of what is taught during lectures. We describe techniques that medical educators can use when leading teaching sessions to foster engagement and encourage self-directed learning, based on current literature and evidence about learning. When these techniques are incorporated, sessions can be effective in delivering core knowledge, contextualizing content, and explaining difficult concepts, leading to increased learning. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. A novel technique for active vibration control, based on optimal ...

    Indian Academy of Sciences (India)

    ... structure by simultaneously tracking zero references for modes of vibration. To illustrate the technique, a two-degrees of freedom spring-mass-dampersystem is considered as a test system. The mathematical model of the system is derived and then converted into a state-space model. A linear quadratic tracking control law ...

  9. The regeneration of polluted activated carbon by radiation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Wu Minghong; Bao Borong [Shanghai Institute of Nuclear Research, Academia Sinica, Shanghai (China); Zhou Ruimin; Zhu Jinliang; Hu Longxin [Shanghai University, Shanghai (China)

    1998-10-01

    In this paper, the regeneration of used activated carbon from monosodium glutamate factory was experimented using radiation and acid-alkali chemical cleaning method. Results showed that the activated carbon saturated with pollutants can be wash away easily by flushing with chemical solution prior irradiation. DSC was used to monitor the change of carbon adsorption.

  10. The influence of curricular and extracurricular learning activities on students' choice of chiropractic technique.

    Science.gov (United States)

    Sikorski, David M; KizhakkeVeettil, Anupama; Tobias, Gene S

    2016-03-01

    Surveys for the National Board of Chiropractic Examiners indicate that diversified chiropractic technique is the most commonly used chiropractic manipulation method. The study objective was to investigate the influences of our diversified core technique curriculum, a technique survey course, and extracurricular technique activities on students' future practice technique preferences. We conducted an anonymous, voluntary survey of 1st, 2nd, and 3rd year chiropractic students at our institution. Surveys were pretested for face validity, and data were analyzed using descriptive and inferential statistics. We had 164 students (78% response rate) participate in the survey. Diversified was the most preferred technique for future practice by students, and more than half who completed the chiropractic technique survey course reported changing their future practice technique choice as a result. The students surveyed agreed that the chiropractic technique curriculum and their experiences with chiropractic practitioners were the two greatest bases for their current practice technique preference, and that their participation in extracurricular technique clubs and seminars was less influential. Students appear to have the same practice technique preferences as practicing chiropractors. The chiropractic technique curriculum and the students' experience with chiropractic practitioners seem to have the greatest influence on their choice of chiropractic technique for future practice. Extracurricular activities, including technique clubs and seminars, although well attended, showed a lesser influence on students' practice technique preferences.

  11. Activated sampling in complex materials at finite temperature: The properly obeying probability activation-relaxation technique

    Science.gov (United States)

    Vocks, Henk; Chubynsky, M. V.; Barkema, G. T.; Mousseau, Normand

    2005-12-01

    While the dynamics of many complex systems is dominated by activated events, there are very few simulation methods that take advantage of this fact. Most of these procedures are restricted to relatively simple systems or, as with the activation-relaxation technique (ART), sample the conformation space efficiently at the cost of a correct thermodynamical description. We present here an extension of ART, the properly obeying probability ART (POP-ART), that obeys detailed balance and samples correctly the thermodynamic ensemble. Testing POP-ART on two model systems, a vacancy and an interstitial in crystalline silicon, we show that this method recovers the proper thermodynamical weights associated with the various accessible states and is significantly faster than molecular dynamics in the simulations of a vacancy below 700 K.

  12. Nuclear activation techniques in the life sciences, 1978

    International Nuclear Information System (INIS)

    Parr, R.M.; Ryabukhin, Yu.S.

    1978-01-01

    A brief summary of the symposium is presented, pointing out the main achievements in the use of activation analysis for elemental analysis of biological materials. Some of the individual papers presented at the meeting are mentioned

  13. Air pollution studies in Tianjing city using neutron activation analysis techniques

    International Nuclear Information System (INIS)

    Ni Bangfa; Tian Weizhi; Nie Nuiling; Wang Pingsheng

    1999-01-01

    Two sites of airborne sampling from industrial and residential areas were made in Tianjing city during February and June using PM-10 sampler and analyzed by NAA techniques; Comparison of air pollution between urban and rural area in Tianjing city was made using neutron activation analysis techniques and some other data analyzing techniques. (author)

  14. A comparison between active and passive techniques for measurements of radon emanation factors

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Coto, I. [Dept. Fisica Aplicada, University of Huelva, Huelva (Spain)], E-mail: Israel.lopez@dfa.uhu.es; Mas, J.L. [Dept. de Fisica Aplicada I, E.U.P., University of Seville, Seville (Spain); San Miguel, E.G.; Bolivar, J.P. [Dept. Fisica Aplicada, University of Huelva, Huelva (Spain); Sengupta, D. [Department of Geology and Geophysics, I.I.T. Kharagpur, West Bengal (India)

    2009-05-15

    Some radon related parameters have been determined through two different techniques (passive and active) in soil and phosphogypsum samples. Emanation factors determined through these techniques show a good agreement for soil samples while for phosphogympsum samples appear large discrepancies. In this paper, these discrepancies are analyzed and explained if non-controlled radon leakages in the passive technique are taken into account.

  15. A novel technique for active vibration control, based on optimal ...

    Indian Academy of Sciences (India)

    BEHROUZ KHEIRI SARABI

    2017-07-11

    Jul 11, 2017 ... Active vibration control; linear quadratic tracking; two-degrees of freedom system. PACS No. 02.30.Yy. 1. Introduction. Demand for energy is ever increasing and researchers are trying hard to make lightweight ... finite actuator dynamics for flexible structures to over- come instability. Stability based on the ...

  16. Justification of rational parameters of briquetting using mechanic activation techniques

    Science.gov (United States)

    Nikolaeva, L. A.; Burenina, O. N.

    2017-12-01

    The paper illustrates results of development of technology and compositions of briquetting substandard lignite waste with the use of tar as a binder, modified with mechanically activated organic-mineral fillers. The influence of highly disperse additives and technological briquetting regimes on the structure formation and the qualitative characteristics of fuel brown coal briquettes is considered.

  17. Instrumental Neutron Activation Analysis Technique using Subsecond Radionuclides

    DEFF Research Database (Denmark)

    Nielsen, H.K.; Schmidt, J.O.

    1987-01-01

    The fast irradiation facility Mach-1 installed at the Danish DR 3 reactor has been used in boron determinations by means of Instrumental Neutron Activation Analysis using12B with 20-ms half-life. The performance characteristics of the system are presented and boron determinations of NBS standard...

  18. Behaviour change techniques in physical activity interventions for men with prostate cancer: A systematic review.

    Science.gov (United States)

    Hallward, Laura; Patel, Nisha; Duncan, Lindsay R

    2018-02-01

    Physical activity interventions can improve prostate cancer survivors' health. Determining the behaviour change techniques used in physical activity interventions can help elucidate the mechanisms by which an intervention successfully changes behaviour. The purpose of this systematic review was to identify and evaluate behaviour change techniques in physical activity interventions for prostate cancer survivors. A total of 7 databases were searched and 15 studies were retained. The studies included a mean 6.87 behaviour change techniques (range = 3-10), and similar behaviour change techniques were implemented in all studies. Consideration of how behaviour change techniques are implemented may help identify how behaviour change techniques enhance physical activity interventions for prostate cancer survivors.

  19. The Effectiveness of Active and Traditional Teaching Techniques in the Orthopedic Assessment Laboratory

    Science.gov (United States)

    Nottingham, Sara; Verscheure, Susan

    2010-01-01

    Active learning is a teaching methodology with a focus on student-centered learning that engages students in the educational process. This study implemented active learning techniques in an orthopedic assessment laboratory, and the effects of these teaching techniques. Mean scores from written exams, practical exams, and final course evaluations…

  20. Aerial monitoring in active mud volcano by UAV technique

    Science.gov (United States)

    Pisciotta, Antonino; Capasso, Giorgio; Madonia, Paolo

    2016-04-01

    UAV photogrammetry opens various new applications in the close range domain, combining aerial and terrestrial photogrammetry, but also introduces low-cost alternatives to the classical manned aerial photogrammetry. Between 2014 and 2015 tree aerial surveys have been carried out. Using a quadrotor drone, equipped with a compact camera, it was possible to generate high resolution elevation models and orthoimages of The "Salinelle", an active mud volcanoes area, located in territory of Paternò (South Italy). The main risks are related to the damages produced by paroxysmal events. Mud volcanoes show different cyclic phases of activity, including catastrophic events and periods of relative quiescence characterized by moderate activity. Ejected materials often are a mud slurry of fine solids suspended in liquids which may include water and hydrocarbon fluids, the bulk of released gases are carbon dioxide, with some methane and nitrogen, usually pond-shaped of variable dimension (from centimeters to meters in diameter). The scope of the presented work is the performance evaluation of a UAV system that was built to rapidly and autonomously acquire mobile three-dimensional (3D) mapping data in a volcanic monitoring scenario.

  1. TECHNIQUES OF ACTIVATION OF STUDENTS’ SPEECH ACTIVITY AT FOREIGN LANGUAGE LESSONS

    Directory of Open Access Journals (Sweden)

    Tetyana Rozumna

    2016-12-01

    Full Text Available In the article techniques of activation of speech activity of students at lessons of foreign language are analyzed; types, sources, requirements to didactic providing of a dialogue, rules of conduct of a dialogue, and also circumstances which prevent its origin are considered. The author notices that dialogical approach assumes the transmission of knowledge and also general growth of personality, personal development of a teacher and students. It is well-proven that interaction eliminates prevailing of one personality above other, one opinion above other, during the educational process students study to think critically, settle thorny problems by the analysis of circumstances and information, accept careful decisions. The form of interaction is an educational dialogue between a teacher and students, which foresees passing to the subject-subject relations, helps in interchange of educational information, points of view, and mastering of social experience in the conditions of collaboration. The attention is paid to the peculiarities of usage of methods of discussion and debates in teaching foreign languages, their stages of work, abilities and skills which are necessary for a teacher if he plans to use these methods; the development of intellectual activity of students at lessons of foreign language can be attained through specific problem situations, which also help to develop skills of critical thinking.

  2. Lithium carbonate tablets. Preparation techniques influence over active ingredient liberation

    International Nuclear Information System (INIS)

    Bueno, J.H.F.; Oliveira, A.G. de; Toledo Salgado, P.E. de

    1989-01-01

    Lithium carbonate tablets, prepared using wet and dry granulation, were assessed in vitro so as to determine the active ingredient dissolution. In this study, standardized formulations were used and developed with usual adjuvants (lactose - maize starch). Parallel to the dissolution testing. The influence of the preparation process over some physical characteristics (hardness, friability and disintegration) was also analysed. Although a better performance was observed of tables prepared using dry granulation, the authors concluded that the wet process is more suitable in preparing tables with the mentioned drug. (author)

  3. Experimental techniques for screening of antiosteoporotic activity in postmenopausal osteoporosis.

    Science.gov (United States)

    Satpathy, Swaha; Patra, Arjun; Ahirwar, Bharti

    2015-12-01

    Postmenopausal osteoporosis, a silent epidemic, has become a major health hazard, afflicting about 50% of postmenopausal women worldwide and is thought to be a disease with one of the highest incidences in senile people. It is a chronic, progressive condition associated with micro-architectural deterioration of bone tissue that results in low bone mass, decreased bone strength that predisposes to an increased risk of fracture. Women are more likely to develop osteoporosis than men due to reduction in estrogen during menopause which leads to decline in bone formation and increase in bone resorption activity. Estrogen is able to suppress the production of proinflammatory cytokines like interleukin (IL)-1, IL-6, IL-7 and tumor necrosis factor (TNF-α). This is why these cytokines are elevated in postmenopausal women. In this review article we have made an attempt to collate the various methods and parameters most frequently used for screening of antiosteoporotic activity in postmenopausal osteoporosis. Pertaining to ovariectomized animal model, this is the most appropriate model for studying the efficacy of different drugs to prevent bone loss in postmenopausal osteoporosis.

  4. Exogenous bleaching evaluation on dentin using chemical activated technique compared with diode laser technique

    International Nuclear Information System (INIS)

    Carvalho, Breno Carnevalli Franco de

    2003-01-01

    This in vitro study compared the results of different exogenous bleaching proceedings on dentin after treatment of enamel surface. Thirty human canine were hewn preserving the vestibular half of the crown and 3 mm of root, showing a vestibular-lingual thickness average of 3,5 mm, measuring in the third middle of the crown. Ali teeth were maintained in wet chamber during the experiment. Digital photographs were taken of the dentin surface at 3 experimental times (LI: initial record, L0: immediate pos-bleaching record and L 15: 15 days after bleaching). The teeth were divided into 3 experimental groups of 10 teeth in each. The Control Group did not receive any kind of treatment. The Laser Group received 2 session of laser bleaching, with 3 applications each, using 35% hydrogen peroxide, activated by diode laser during 30 seconds, by scanning the enamel surface from incisal edge to the top of the crown, from mesial to distal portion of the crown and circularly, each movement during 10 seconds. The following parameters being adopted: wavelength of 808 nm, power of 1,5 W and optic fiber with 600 μm (core). The Peroxide Group received 28 daily applications, during 4 hours each application, using 16% carbamide peroxide. The bleaching records were analysed using a computer, through RGBK (red, green , blue and black). The K averages (K=100% for black and K=0% for white) of the records for Control Group were: LI=50,1 %, L0=50,3% and L 15=50,6%. For Laser Group the K averages were LI=48,5%, L0=50,0% and L 15=47,7%. And for the Peroxide Group were LI=50,5%, L0=35,9% and L 15=37,3%. The statistical analysis showed no significant difference of the K between the Control Group and the Laser Group, as to LI, L0 and L 15. Only Peroxide Group showed significant statistical difference between LI with L0 and L 15 (0,1%), and L0 in comparison with L 15 did not show any difference. (author)

  5. Monolithic active pixel radiation detector with shielding techniques

    Energy Technology Data Exchange (ETDEWEB)

    Deptuch, Grzegorz W.

    2018-03-20

    A monolithic active pixel radiation detector including a method of fabricating thereof. The disclosed radiation detector can include a substrate comprising a silicon layer upon which electronics are configured. A plurality of channels can be formed on the silicon layer, wherein the plurality of channels are connected to sources of signals located in a bulk part of the substrate, and wherein the signals flow through electrically conducting vias established in an isolation oxide on the substrate. One or more nested wells can be configured from the substrate, wherein the nested wells assist in collecting charge carriers released in interaction with radiation and wherein the nested wells further separate the electronics from the sensing portion of the detector substrate. The detector can also be configured according to a thick SOA method of fabrication.

  6. Radiochemical separation and their application to neutron activation analysis technique

    International Nuclear Information System (INIS)

    Turel, Z.R.

    2013-01-01

    The present paper discusses the development of some new, rapid and selective method for the radiochemical separation and estimation of elements such as, Co(II) 2-3 , Ir(III) 4 , Au(III) 5 , Pt(IV), Pd(II), Os(IV) 6 , Cu(II), Ag(I), Mo(VI), Ni(II), Zn(II), Cd(II), Hg(II), Cs(I), Sb(III), La(III), Sc(III) etc. using various reagents. Various parameters such as pH, time of equilibrium, effect of anions and cations, effect of reagent etc. has been determined employing tracers of the elements under consideration and will be discussed. The method is made highly selective by the use of appropriate masking agent. The stoichiometry of metal reagent is determined by the substoichiometric method. Some examples of multielemental radiochemical separation methods thus developed which have been applied in determining the elements by radiochemical thermal neutron activation analysis will be presented and discussed. The implications of the results on the reference system will also be accounted. Statistical evaluation with reference to accuracy, precision and sensitivity will also be presented

  7. Designing on-line analyzer for coal on belt conveyor using neutron activation technique

    International Nuclear Information System (INIS)

    Rony Djokorayono; Agus Cahyono

    2014-01-01

    Basic design of on-line analyzer for coal on belt conveyor using neutron activation technique has been carried out. Compared with sampling technique, this neutron activation technique has some advantages in term of analysis accuracy and time. The design activities performed include the establishment of design requirements, functional requirements, technical requirements, technical specification, detection sub-system design, data acquisition subsystem design, and operator computer console design. This program will use Nal(Tl) scintillation detector to detect gamma-rays emitted by elements in coal due to neutron activation of a neutron source, 252 Cf (Californium-252). This basic design of on-line analyzer for coal on belt conveyor using neutron activation technique should be followed up with the development of detailed design, prototype construction, and field testing. (author)

  8. Effects on hamstring muscle extensibility, muscle activity, and balance of different stretching techniques.

    Science.gov (United States)

    Lim, Kyoung-Il; Nam, Hyung-Chun; Jung, Kyoung-Sim

    2014-02-01

    [Purpose] The purpose of this study was to investigate the effects of two different stretching techniques on range of motion (ROM), muscle activation, and balance. [Subjects] For the present study, 48 adults with hamstring muscle tightness were recruited and randomly divided into three groups: a static stretching group (n=16), a PNF stretching group (n=16), a control group (n=16). [Methods] Both of the stretching techniques were applied to the hamstring once. Active knee extension angle, muscle activation during maximum voluntary isometric contraction (MVC), and static balance were measured before and after the application of each stretching technique. [Results] Both the static stretching and the PNF stretching groups showed significant increases in knee extension angle compared to the control group. However, there were no significant differences in muscle activation or balance between the groups. [Conclusion] Static stretching and PNF stretching techniques improved ROM without decrease in muscle activation, but neither of them exerted statistically significant effects on balance.

  9. Lower limb muscle activity during squat and judo technique seoi nage

    OpenAIRE

    Holý, Jakub

    2015-01-01

    Title: Lower limb muscle activity during squat and technique seoi nage in judo Objectives: Goals of my work is finding activity lower muscle limb using surface electromyography in shallow squat, deep squat and seoi nage technic in judo. From the obtained results will be compared muscle activity in relative to MVC and compared timing activity of measuring muscles between deep squat and technic seoi nage right. Methods: Research component consisted of 10 subjects, 5 of fitness and 5 are active ...

  10. Behavior change techniques in top-ranked mobile apps for physical activity.

    Science.gov (United States)

    Conroy, David E; Yang, Chih-Hsiang; Maher, Jaclyn P

    2014-06-01

    Mobile applications (apps) have potential for helping people increase their physical activity, but little is known about the behavior change techniques marketed in these apps. The aim of this study was to characterize the behavior change techniques represented in online descriptions of top-ranked apps for physical activity. Top-ranked apps (n=167) were identified on August 28, 2013, and coded using the Coventry, Aberdeen and London-Revised (CALO-RE) taxonomy of behavior change techniques during the following month. Analyses were conducted during 2013. Most descriptions of apps incorporated fewer than four behavior change techniques. The most common techniques involved providing instruction on how to perform exercises, modeling how to perform exercises, providing feedback on performance, goal-setting for physical activity, and planning social support/change. A latent class analysis revealed the existence of two types of apps, educational and motivational, based on their configurations of behavior change techniques. Behavior change techniques are not widely marketed in contemporary physical activity apps. Based on the available descriptions and functions of the observed techniques in contemporary health behavior theories, people may need multiple apps to initiate and maintain behavior change. This audit provides a starting point for scientists, developers, clinicians, and consumers to evaluate and enhance apps in this market. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  11. On measuring multiple lexical activation using the cross-modal semantic priming technique

    NARCIS (Netherlands)

    Janse, Esther; Quené, Hugo

    Cross-modal semantic priming with partial auditory primes seems a good technique to assess spoken-word recognition, because it allows tracking the activation of multiple word candidates. However, previous research using this technique has found inconsistent results. First, a priming experiment is

  12. Exploring Undergraduates' Perceptions of the Use of Active Learning Techniques in Science Lectures

    Science.gov (United States)

    Welsh, Ashley J.

    2012-01-01

    This paper examines students' mixed perceptions of the use of active learning techniques in undergraduate science lectures. Written comments from over 250 students offered an in-depth view of why students perceive these techniques as helping or hindering their learning and experience. Fourth- and fifth-year students were more likely to view…

  13. Suitable activated stable nuclide tracer technique and its applications in biology and medicine

    International Nuclear Information System (INIS)

    Zhang Weicheng

    1989-01-01

    Stable isotopes as tracers in biology and medicine have been more extensively used. Mass spectrometry has been a classic technique in the analysis of stable isotopes because it is very sensitive and precise. Activation analysis has recently been introduced as an analytical tool. Its fast speed and simplicity is a great advantage for handling large batches of samples in isotopic tracer experiments. The combination of enriched stable isotope tracer studies and activation analysis techniques has become an ideal and reliable technique, especially in the fields of biology and medicine. This paper presents a survey of the fundamental principle, the character and the applications in biology and medicine for the suitable activated stable isotope tracer techniques

  14. Determination of biologically active phenols and polyphenols in various objects by chromatographic techniques

    International Nuclear Information System (INIS)

    Kochetova, M V; Semenistaya, E N; Larionov, Oleg G; Revina, A A

    2007-01-01

    Chromatographic techniques for determination of biologically active phenols and polyphenols are considered. Various methods for sample preparation and detection are compared. The advantages of high performance liquid chromatography with spectrophotometric detection for determination of antioxidants are demonstrated. Data on determination of biologically active phenols and polyphenols published in the period from 1995 to 2005 are analysed.

  15. Thin Layer Activation (TLA) Technique Application for Monitoring Corrosion, Erosion and Wear on Industrial Components

    International Nuclear Information System (INIS)

    Hari Suryanto; Sunarhadijoso Soenarjo; Imam Kambali

    2003-01-01

    Thin Layer Activation (TLA) technique is one of high-precision and effective nuclear methods for measurement and monitoring corrosion, erosion and wear on industrial components. This technique was developed by using low current charged particle beam produced from a cyclotron to activate a surface layer of component. In this case only the surface layer in the μm range at the desired parts of the component are activated. The surface activation lets a very low radioactivity concerning to safety aspect but still can be detected and measured well due to specificity and sensitivity of nuclear reaction produced. Some reported experiences on TLA technique have confirmed that the technique is proper fully recommended to be applied in various industries such as automotive, petrochemical, petroleum, power plant, transportation, lubricant oil etc. The measurement and monitoring of corrosion, erosion and wear rates can be remotely and continuously performed, on-line and in-situ, giving a real-time information. By giving a real-time information, TLA technique provides a considerably better estimation of the components lifetimes for any operating condition. The measurement sensitivity of surface loss rate by using this method can reach up to 0.01 μm depends on the type of applications. The application of the TLA technique lets early observation on the damage of the system preventing any disturbance on industrial process, either in the form of accident during the process or that of unscheduled interruption. (author)

  16. Pro-Activeness of Parents in Accepting Behavior Management Techniques: A Cross-Sectional Evaluative Study.

    Science.gov (United States)

    Venkataraghavan, Karthik; Shah, Jolly; Kaur, Manpreet; Trivedi, Krishna; Shah, Shalin; Virda, Mira

    2016-07-01

    The contemporary parents are more active and participate in the decision making during dental treatment. To assess the parents' acceptance towards behavior management techniques commonly used in the pediatric dentistry in different dental situation. Fifty-one parents participated in the study. Children's dental fear was assessed by the parents before attending power point presentation using Dental Subscale of the Children's Fear Survey Schedule (CFSS-DS). Parents viewed power point presentation of eight behavior management techniques being used during pediatric dental treatment. The techniques were: 1) Voice control; 2) Tell-Show-Do; 3) Positive reinforcement; 4) Parental presence or absence; 5) HOME; 6) Physical restraint; 7) N2O-O2 sedation; 8) General anesthesia. Parents were asked to arrange various behavior management techniques from most accepted technique to least accepted technique in various dental situations according to their view. All the parents completed the questionnaire. Most children show increased anxiety related to dental component of CFSS-DS scale particularly during the administration of local anesthetic. In present study most preferred behavior management technique was Tell-Show-Do followed by positive reinforcement and least preferred behavior management technique was general anesthesia followed by physical restraint. Children's anxiety level increases during the condition related to dentistry which can be overcome by developing positive approach in children and parents towards dentistry and by utilizing various behaviour management strategies. A generalized low parental tolerance level for firm management techniques was seen in the present study population.

  17. Investigating real-time activation of adenosine receptors by bioluminescence resonance energy transfer technique

    Science.gov (United States)

    Huang, Yimei; Yang, Hongqin; Zheng, Liqin; Chen, Jiangxu; Wang, Yuhua; Li, Hui; Xie, Shusen

    2013-02-01

    Adenosine receptors play important roles in many physiological and pathological processes, for example regulating myocardial oxygen consumption and the release of neurotransmitters. The activations of adenosine receptors have been studied by some kinds of techniques, such as western blot, immunohistochemistry, etc. However, these techniques cannot reveal the dynamical response of adenosine receptors under stimulation. In this paper, bioluminescence resonance energy transfer technique was introduced to study the real-time activation of adenosine receptors by monitoring the dynamics of cyclic adenosine monophosphate (cAMP) level. The results showed that there were significant differences between adenosine receptors on real-time responses under stimulation. Moreover, the dynamics of cAMP level demonstrated that competition between adenosine receptors existed. Taken together, our study indicates that monitoring the dynamics of cAMP level using bioluminescence resonance energy transfer technique could be one potential approach to investigate the mechanism of competitions between adenosine receptors.

  18. Metabolic mapping of functional activity in human subjects with the [18F]fluorodeoxyglucose technique

    International Nuclear Information System (INIS)

    Greenberg, J.H.; Reivich, M.; Alavi, A.

    1981-01-01

    The 2-[ 18 F]fluoro-2-deoxy-D-glucose technique was used to measure regional cerebral glucose utilization by human subjects during functional activation. Normal male volunteers subjected to one or more sensory stimuli exhibited focal increases in glucose metabolism in response to the stimulus. These results demonstrate that the technique is capable of providing functional maps in vivo related to both body region and submodality of sensory information in the human brain

  19. Thermally activated state transition technique for femto-Newton-level force measurement.

    Science.gov (United States)

    Chen, Feng-Jung; Wong, Jhih-Sian; Hsu, Ken Y; Hsu, Long

    2012-05-01

    We develop and test a thermally activated state transition technique for ultraweak force measurement. As a force sensor, the technique was demonstrated on a classical Brownian bead immersed in water and restrained by a bistable optical trap. A femto-Newton-level flow force imposed on this sensor was measured by monitoring changes in the transition rates of the bead hopping between two energy states. The treatment of thermal disturbances as a requirement instead of a limiting factor is the major feature of the technique, and provides a new strategy by which to measure other ultraweak forces beyond the thermal noise limit.

  20. Analysis technique for controlling system wavefront error with active/adaptive optics

    Science.gov (United States)

    Genberg, Victor L.; Michels, Gregory J.

    2017-08-01

    The ultimate goal of an active mirror system is to control system level wavefront error (WFE). In the past, the use of this technique was limited by the difficulty of obtaining a linear optics model. In this paper, an automated method for controlling system level WFE using a linear optics model is presented. An error estimate is included in the analysis output for both surface error disturbance fitting and actuator influence function fitting. To control adaptive optics, the technique has been extended to write system WFE in state space matrix form. The technique is demonstrated by example with SigFit, a commercially available tool integrating mechanical analysis with optical analysis.

  1. Technique, muscle activity and kinematic differences in young adults texting on mobile phones.

    Science.gov (United States)

    Gustafsson, Ewa; Johnson, Peter W; Lindegård, Agneta; Hagberg, Mats

    2011-05-01

    The aim of this study was to investigate whether there are differences in technique between young adults with and without musculoskeletal symptoms when using a mobile phone for texting and whether there are differences in muscle activity and kinematics between different texting techniques. A total of 56 young adults performed a standardised texting task on a mobile phone. Their texting techniques were registered using an observation protocol. The muscular activity in six muscles in the right forearm/hand and both shoulders were registered by surface electromyography and the thumb abduction/adduction and flexion/extension were registered using a biaxial electrogoniometer. Differences in texting techniques were found between the symptomatic and the asymptomatic group, with a higher proportion of sitting with back support and forearm support and with a neutral head position in the asymptomatic group. Differences in muscle activity and kinematics were also found between different texting techniques. The differences in texting technique between symptomatic and asymptomatic subjects cannot be explained by them having symptoms but may be a possible contribution to their symptoms. STATEMENT OF RELEVANCE: There has been a dramatically increased use of mobile phones for texting especially among young people during the last years. A better understanding of the physical exposure associated with the intensive use is important in order to prevent the development of musculoskeletal disorders and decreased work ability related to this use.

  2. Behavior Change Techniques Implemented in Electronic Lifestyle Activity Monitors: A Systematic Content Analysis

    Science.gov (United States)

    Lewis, Zakkoyya H; Mayrsohn, Brian G; Rowland, Jennifer L

    2014-01-01

    Background Electronic activity monitors (such as those manufactured by Fitbit, Jawbone, and Nike) improve on standard pedometers by providing automated feedback and interactive behavior change tools via mobile device or personal computer. These monitors are commercially popular and show promise for use in public health interventions. However, little is known about the content of their feedback applications and how individual monitors may differ from one another. Objective The purpose of this study was to describe the behavior change techniques implemented in commercially available electronic activity monitors. Methods Electronic activity monitors (N=13) were systematically identified and tested by 3 trained coders for at least 1 week each. All monitors measured lifestyle physical activity and provided feedback via an app (computer or mobile). Coding was based on a hierarchical list of 93 behavior change techniques. Further coding of potentially effective techniques and adherence to theory-based recommendations were based on findings from meta-analyses and meta-regressions in the research literature. Results All monitors provided tools for self-monitoring, feedback, and environmental change by definition. The next most prevalent techniques (13 out of 13 monitors) were goal-setting and emphasizing discrepancy between current and goal behavior. Review of behavioral goals, social support, social comparison, prompts/cues, rewards, and a focus on past success were found in more than half of the systems. The monitors included a range of 5-10 of 14 total techniques identified from the research literature as potentially effective. Most of the monitors included goal-setting, self-monitoring, and feedback content that closely matched recommendations from social cognitive theory. Conclusions Electronic activity monitors contain a wide range of behavior change techniques typically used in clinical behavioral interventions. Thus, the monitors may represent a medium by which

  3. Estimation of Anti-HIV Activity of HEPT Analogues Using MLR, ANN, and SVM Techniques.

    Science.gov (United States)

    Shaik, Basheerulla; Zafar, Tabassum; Agrawal, Vijay K

    2013-01-01

    The present study deals with the estimation of the anti-HIV activity (log1/C) of a large set of 107 HEPT analogues using molecular descriptors which are responsible for the anti-HIV activity. The study has been undertaken by three techniques MLR, ANN, and SVM. The MLR model fits the train set with R (2)=0.856 while in ANN and SVM with higher values of R (2) = 0.850, 0.874, respectively. SVM model shows improvement to estimate the anti-HIV activity of trained data, while in test set ANN have higher R (2) value than those of MLR and SVM techniques. R m (2) = metrics and ridge regression analysis indicated that the proposed four-variable model MATS5e, RDF080u, T(O⋯O), and MATS5m as correlating descriptors is the best for estimating the anti-HIV activity (log 1/C) present set of compounds.

  4. MAG4 versus alternative techniques for forecasting active region flare productivity

    Science.gov (United States)

    Falconer, David A; Moore, Ronald L; Barghouty, Abdulnasser F; Khazanov, Igor

    2014-01-01

    MAG4 is a technique of forecasting an active region's rate of production of major flares in the coming few days from a free magnetic energy proxy. We present a statistical method of measuring the difference in performance between MAG4 and comparable alternative techniques that forecast an active region's major-flare productivity from alternative observed aspects of the active region. We demonstrate the method by measuring the difference in performance between the “Present MAG4” technique and each of three alternative techniques, called “McIntosh Active-Region Class,” “Total Magnetic Flux,” and “Next MAG4.” We do this by using (1) the MAG4 database of magnetograms and major flare histories of sunspot active regions, (2) the NOAA table of the major-flare productivity of each of 60 McIntosh active-region classes of sunspot active regions, and (3) five technique performance metrics (Heidke Skill Score, True Skill Score, Percent Correct, Probability of Detection, and False Alarm Rate) evaluated from 2000 random two-by-two contingency tables obtained from the databases. We find that (1) Present MAG4 far outperforms both McIntosh Active-Region Class and Total Magnetic Flux, (2) Next MAG4 significantly outperforms Present MAG4, (3) the performance of Next MAG4 is insensitive to the forward and backward temporal windows used, in the range of one to a few days, and (4) forecasting from the free-energy proxy in combination with either any broad category of McIntosh active-region classes or any Mount Wilson active-region class gives no significant performance improvement over forecasting from the free-energy proxy alone (Present MAG4). Key Points Quantitative comparison of performance of pairs of forecasting techniques Next MAG4 forecasts major flares more accurately than Present MAG4 Present MAG4 forecast outperforms McIntosh AR Class and total magnetic flux PMID:26213517

  5. Changes in muscle activation following balance and technique training and a season of Australian football.

    Science.gov (United States)

    Donnelly, C J; Elliott, B C; Doyle, T L A; Finch, C F; Dempsey, A R; Lloyd, D G

    2015-05-01

    Determine if balance and technique training implemented adjunct to 1001 male Australian football players' training influenced the activation/strength of the muscles crossing the knee during pre-planned and unplanned sidestepping. Randomized Control Trial. Each Australian football player participated in either 28 weeks of balance and technique training or 'sham' training. Twenty-eight Australian football players (balance and technique training, n=12; 'sham' training, n=16) completed biomechanical testing pre-to-post training. Peak knee moments and directed co-contraction ratios in three degrees of freedom, as well as total muscle activation were calculated during pre-planned and unplanned sidestepping. No significant differences in muscle activation/strength were observed between the 'sham' training and balance and technique training groups. Following a season of Australian football, knee extensor (p=0.023) and semimembranosus (p=0.006) muscle activation increased during both pre-planned sidestepping and unplanned sidestepping. Following a season of Australian football, total muscle activation was 30% lower and peak valgus knee moments 80% greater (p=0.022) during unplanned sidestepping when compared with pre-planned sidestepping. When implemented in a community level training environment, balance and technique training was not effective in changing the activation of the muscles crossing the knee during sidestepping. Following a season of Australian football, players are better able to support both frontal and sagittal plane knee moments. When compared to pre-planned sidestepping, Australian football players may be at increased risk of anterior cruciate ligament injury during unplanned sidestepping in the latter half of an Australian football season. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  6. Current activities in development of PIE techniques in JMTR hot laboratory

    International Nuclear Information System (INIS)

    Ishii, Toshimitsu; Ohmi, Masao; Shimizu, Michio; Kaji, Yoshiyuki; Ueno, Fumiyoshi

    2006-01-01

    A wide variety of post-irradiation examinations (PIEs) for research and development of nuclear fuels and materials to be utilized in nuclear field has been carried out since 1971 in three kinds of β-γ hot cells; concrete, lead and steel cells in the JMTR Hot Laboratory (JMTR HL) associated with the Japan Materials Testing Reactor (JMTR). In addition to PIEs, the re-capsuling work including re-instrumentation was also conducted for the power ramping tests of the irradiated LWR fuels using Boiling Water Capsule (BOCA). Recently, new PIE techniques are required for the advanced irradiation studies. In this paper, the irradiation assisted stress corrosion cracking (IASCC) growth test technique of irradiated in-core structural materials and the remote operation technique of the atomic force microscope (AFM) are described as JMTR HL's current activities in the development of new PIE techniques. (author)

  7. Analysis of voltage modulation based active damping techniques for small DC-link drive system

    DEFF Research Database (Denmark)

    Wang, Dong; Lu, Kaiyuan; Rasmussen, Peter Omand

    2015-01-01

    without the requirements of the information of system parameters and operating conditions. Finally, active damping techniques with minimized current magnitude and total duty cycle are discussed, in order to fit various operating conditions. Simulation and experimental results are presented to verify...

  8. Applications of neutron activation analysis technique in the IPR-R1 research reactor

    International Nuclear Information System (INIS)

    Sabino, C.V.S.; Mansur, N.

    1986-01-01

    A review is made of the neutron activation analysis technique used in the IPR-R1 reactor of the Centro de Desenvolvimento da Tecnologia Nuclear - NUCLEBRAS. Some characteristics of the method are described, types of samples and elements analyzed are also mentioned. (Author) [pt

  9. A comparison of maximal bioenergetic enzyme activities obtained with commonly used homogenization techniques.

    Science.gov (United States)

    Grace, M; Fletcher, L; Powers, S K; Hughes, M; Coombes, J

    1996-12-01

    Homogenization of tissue for analysis of bioenergetic enzyme activities is a common practice in studies examining metabolic properties of skeletal muscle adaptation to disease, aging, inactivity or exercise. While numerous homogenization techniques are in use today, limited information exists concerning the efficacy of specific homogenization protocols. Therefore, the purpose of this study was to compare the efficacy of four commonly used approaches to homogenizing skeletal muscle for analysis of bioenergetic enzyme activity. The maximal enzyme activity (Vmax) of citrate synthase (CS) and lactate dehydrogenase (LDH) were measured from homogenous muscle samples (N = 48 per homogenization technique) and used as indicators to determine which protocol had the highest efficacy. The homogenization techniques were: (1) glass-on-glass pestle; (2) a combination of a mechanical blender and a teflon pestle (Potter-Elvehjem); (3) a combination of the mechanical blender and a biological detergent; and (4) the combined use of a mechanical blender and a sonicator. The glass-on-glass pestle homogenization protocol produced significantly higher (P pestle homogenization protocol is the technique of choice for studying bioenergetic enzyme activity in skeletal muscle.

  10. Estimation of Anti-HIV Activity of HEPT Analogues Using MLR, ANN, and SVM Techniques

    Directory of Open Access Journals (Sweden)

    Basheerulla Shaik

    2013-01-01

    value than those of MLR and SVM techniques. Rm2= metrics and ridge regression analysis indicated that the proposed four-variable model MATS5e, RDF080u, T(O⋯O, and MATS5m as correlating descriptors is the best for estimating the anti-HIV activity (log 1/C present set of compounds.

  11. Status of the Usage of Active Learning and Teaching Method and Techniques by Social Studies Teachers

    Science.gov (United States)

    Akman, Özkan

    2016-01-01

    The purpose of this study was to determine the active learning and teaching methods and techniques which are employed by the social studies teachers working in state schools of Turkey. This usage status was assessed using different variables. This was a case study, wherein the research was limited to 241 social studies teachers. These teachers…

  12. Behavior Change Techniques Present in Wearable Activity Trackers: A Critical Analysis.

    Science.gov (United States)

    Mercer, Kathryn; Li, Melissa; Giangregorio, Lora; Burns, Catherine; Grindrod, Kelly

    2016-04-27

    Wearable activity trackers are promising as interventions that offer guidance and support for increasing physical activity and health-focused tracking. Most adults do not meet their recommended daily activity guidelines, and wearable fitness trackers are increasingly cited as having great potential to improve the physical activity levels of adults. The objective of this study was to use the Coventry, Aberdeen, and London-Refined (CALO-RE) taxonomy to examine if the design of wearable activity trackers incorporates behavior change techniques (BCTs). A secondary objective was to critically analyze whether the BCTs present relate to known drivers of behavior change, such as self-efficacy, with the intention of extending applicability to older adults in addition to the overall population. Wearing each device for a period of 1 week, two independent raters used CALO-RE taxonomy to code the BCTs of the seven wearable activity trackers available in Canada as of March 2014. These included Fitbit Flex, Misfit Shine, Withings Pulse, Jawbone UP24, Spark Activity Tracker by SparkPeople, Nike+ FuelBand SE, and Polar Loop. We calculated interrater reliability using Cohen's kappa. The average number of BCTs identified was 16.3/40. Withings Pulse had the highest number of BCTs and Misfit Shine had the lowest. Most techniques centered around self-monitoring and self-regulation, all of which have been associated with improved physical activity in older adults. Techniques related to planning and providing instructions were scarce. Overall, wearable activity trackers contain several BCTs that have been shown to increase physical activity in older adults. Although more research and development must be done to fully understand the potential of wearables as health interventions, the current wearable trackers offer significant potential with regard to BCTs relevant to uptake by all populations, including older adults.

  13. Systematic review of behaviour change techniques to promote participation in physical activity among people with dementia.

    Science.gov (United States)

    Nyman, Samuel R; Adamczewska, Natalia; Howlett, Neil

    2018-02-01

    The objective of this study was to systematically review the evidence for the potential promise of behaviour change techniques (BCTs) to increase physical activity among people with dementia (PWD). PsychINFO, MEDLINE, CINAHL, and the Cochrane Central Register of Controlled Trials databases were searched 01/01/2000-01/12/2016. Randomized controlled/quasi-randomized trials were included if they recruited people diagnosed/suspected to have dementia, used at least one BCT in the intervention arm, and had at least one follow-up measure of physical activity/adherence. Studies were appraised using the Cochrane Collaboration Risk of Bias Tool, and BCTs were coded using Michie et al., 2013, Annals of Behavioral Medicine, 46, 81. taxonomy. Intervention findings were narratively synthesized as either 'very promising', 'quite promising', or 'non-promising', and BCTs were judged as having potential promise if they featured in at least twice as many very/quite promising than non-promising interventions (as per Gardner et al., 2016, Health Psychology Review, 10, 89). Nineteen articles from nine trials reported physical activity findings on behavioural outcomes (two very promising, one quite promising, and two non-promising) or intervention adherence (one quite promising and four non-promising). Thirteen BCTs were used across the interventions. While no BCT had potential promise to increase intervention adherence, three BCTs had potential promise for improving physical activity behaviour outcomes: goal setting (behaviour), social support (unspecified), and using a credible source. Three BCTs have potential promise for use in future interventions to increase physical activity among PWD. Statement of contribution What is already known on this subject? While physical activity is a key lifestyle factor to enhance and maintain health and wellbeing amongst the general population, adults rarely participate in sufficient levels to obtain these benefits. Systematic reviews suggest that

  14. An Active Damping Technique for Small DC-Link Capacitor Based Drive System

    DEFF Research Database (Denmark)

    Maheshwari, Ram Krishan; Munk-Nielsen, Stig; Lu, Kaiyuan

    2013-01-01

    A small dc-link capacitor based drive system shows instability when it is operated with large input line inductance at operating points with high power. This paper presents a simple, new active damping technique that can stabilize effectively the drive system at unstable operating points, offering...... points. The stabilizing effect of the active damping terms is demonstrated for an induction machine based drive system. The effects of the added damping terms on the machine current and dc-link voltage are analyzed in detail. A design recommendation for the proposed active damping terms is given...

  15. Activated sludge characterization through microscopy: A review on quantitative image analysis and chemometric techniques

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, Daniela P. [IBB-Institute for Biotechnology and Bioengineering, Centre of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Amaral, A. Luís [IBB-Institute for Biotechnology and Bioengineering, Centre of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Instituto Politécnico de Coimbra, ISEC, DEQB, Rua Pedro Nunes, Quinta da Nora, 3030-199 Coimbra (Portugal); Ferreira, Eugénio C., E-mail: ecferreira@deb.uminho.pt [IBB-Institute for Biotechnology and Bioengineering, Centre of Biological Engineering, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal)

    2013-11-13

    Graphical abstract: -- Highlights: •Quantitative image analysis shows potential to monitor activated sludge systems. •Staining techniques increase the potential for detection of operational problems. •Chemometrics combined with quantitative image analysis is valuable for process monitoring. -- Abstract: In wastewater treatment processes, and particularly in activated sludge systems, efficiency is quite dependent on the operating conditions, and a number of problems may arise due to sludge structure and proliferation of specific microorganisms. In fact, bacterial communities and protozoa identification by microscopy inspection is already routinely employed in a considerable number of cases. Furthermore, quantitative image analysis techniques have been increasingly used throughout the years for the assessment of aggregates and filamentous bacteria properties. These procedures are able to provide an ever growing amount of data for wastewater treatment processes in which chemometric techniques can be a valuable tool. However, the determination of microbial communities’ properties remains a current challenge in spite of the great diversity of microscopy techniques applied. In this review, activated sludge characterization is discussed highlighting the aggregates structure and filamentous bacteria determination by image analysis on bright-field, phase-contrast, and fluorescence microscopy. An in-depth analysis is performed to summarize the many new findings that have been obtained, and future developments for these biological processes are further discussed.

  16. Improved performance of GaAs photocathodes using effective activation technique

    Science.gov (United States)

    Zhang, Yijun; Zhang, Jingzhi; Feng, Cheng; Cheng, Hongchang; Zhang, Xiang; Qian, Yunsheng

    2017-09-01

    To achieve negative-electron-affinity state, the atomically clean surface of GaAs-based photocathode is usually activated by cesium and oxygen in the ultrahigh vacuum environment. In view of the required computer-control of evaporation flow rates, the solid oxygen dispenser instead of gaseous oxygen is urgently needed just as the regular cesium dispenser. Accordingly, the solid cesium and oxygen dispensers were applied to activate epitaxial GaAs cathode samples. Two types of solid oxygen dispensers composed of barium peroxide powder and silver oxide powder respectively are employed to improve cathode photoemission performance. The experimental results show that the barium peroxidebased oxygen dispenser can release more oxygen and bring in higher activation photocurrent and spectral response than the silver oxide-based one. The unsatisfactory feature is that the silver oxide-based oxygen dispenser released effectual oxygen gas more slowly than the barium peroxide-based oxygen dispenser. Therefore, an effective activation technique was proposed to ameliorate this unfavorable phenomenon for the silver oxide-based dispenser, which can bring out the desired symmetry of photocurrent curve shape during the Cs/O alternate activation process. The improved activation technique would provide guidance for the optimization of activation craft.

  17. Comparative study between the PIXE technique and neutron activation analysis for Zinc determination

    International Nuclear Information System (INIS)

    Cruvinel, Paulo Estevao; Crestana, Silvio; Artaxo Netto, Paulo Eduardo

    1997-01-01

    This work presents a comparative study between the PIXE, proton beams and neutron activation analysis (NAA) techniques, for determination of total zinc concentration. Particularly, soil samples from the Pindorama, Instituto Agronomico de Campinas, Sao Paulo State, Brazil, experimental station have been analysed and measuring the zinc contents in μg/g. The results presented good correlation between the mentioned techniques. The PIXE and NAA analyses have been carried out by using the series S, 2.4 MeV proton beams Pelletron accelerator and the IPEN/CNEN-IEA-R1 reactor, both installed at the Sao Paulo - Brazil university

  18. Refolding techniques for recovering biologically active recombinant proteins from inclusion bodies.

    Science.gov (United States)

    Yamaguchi, Hiroshi; Miyazaki, Masaya

    2014-02-20

    Biologically active proteins are useful for studying the biological functions of genes and for the development of therapeutic drugs and biomaterials in a biotechnology industry. Overexpression of recombinant proteins in bacteria, such as Escherichia coli, often results in the formation of inclusion bodies, which are protein aggregates with non-native conformations. As inclusion bodies contain relatively pure and intact proteins, protein refolding is an important process to obtain active recombinant proteins from inclusion bodies. However, conventional refolding methods, such as dialysis and dilution, are time consuming and, often, recovered yields of active proteins are low, and a trial-and-error process is required to achieve success. Recently, several approaches have been reported to refold these aggregated proteins into an active form. The strategies largely aim at reducing protein aggregation during the refolding procedure. This review focuses on protein refolding techniques using chemical additives and laminar flow in microfluidic chips for the efficient recovery of active proteins from inclusion bodies.

  19. The use of environmental monitoring as a technique to identify isotopic enrichment activities

    International Nuclear Information System (INIS)

    Buchmann, Jose Henrique

    2000-01-01

    The use of environmental monitoring as a technique to identify activities related to the nuclear fuel cycle has been proposed, by international organizations, as an additional measure to the safeguards agreements in force. The elements specific for each kind of nuclear activity, or nuclear signatures, inserted in the ecosystem by several transfer paths, can be intercepted with better or worse ability by different live organisms. Depending on the kind of signature of interest, the anthropogenic material identification and quantification require the choice of adequate biologic indicators and, mainly, the use of sophisticated techniques associated with elaborate sample treatments. This work demonstrates the technical viability of using pine needles as bioindicators of nuclear signatures associated with uranium enrichment activities. Additionally, it proposes the use of a technique widely diffused nowadays in the scientific community, the High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS), to identify the signature corresponding to that kind of activities in the ecosystem. It can be also found a description of a methodology recently being applied in analytical chemistry,based on uncertainties estimates metrological concepts, used to calculate the uncertainties associated with the obtained measurement results. Nitric acid solutions with a concentration of 0.3 mol.kg -1 , used to wash pine needles sampled near facilities that manipulate enriched uranium and containing only 0.1 μg.kg -1 of uranium, exhibit a 235 U: 238 U isotopic abundance ratio of 0.0092±0.0002, while solutions originated from samples collected at places located more than 200 km far from activities related to the nuclear fuel cycle exhibit a value of 0.0074±0.0002 for this abundance ratio. Similar results were obtained for samples collected in different places permit to confirm the presence of anthropogenic uranium and demonstrate the viability of using this technique and the

  20. Do physical activity and dietary smartphone applications incorporate evidence-based behaviour change techniques?

    Science.gov (United States)

    Direito, Artur; Dale, Leila Pfaeffli; Shields, Emma; Dobson, Rosie; Whittaker, Robyn; Maddison, Ralph

    2014-06-25

    There has been a recent proliferation in the development of smartphone applications (apps) aimed at modifying various health behaviours. While interventions that incorporate behaviour change techniques (BCTs) have been associated with greater effectiveness, it is not clear to what extent smartphone apps incorporate such techniques. The purpose of this study was to investigate the presence of BCTs in physical activity and dietary apps and determine how reliably the taxonomy checklist can be used to identify BCTs in smartphone apps. The top-20 paid and top-20 free physical activity and/or dietary behaviour apps from the New Zealand Apple App Store Health & Fitness category were downloaded to an iPhone. Four independent raters user-tested and coded each app for the presence/absence of BCTs using the taxonomy of behaviour change techniques (26 BCTs in total). The number of BCTs included in the 40 apps was calculated. Krippendorff's alpha was used to evaluate interrater reliability for each of the 26 BCTs. Apps included an average of 8.1 (range 2-18) techniques, the number being slightly higher for paid (M = 9.7, range 2-18) than free apps (M = 6.6, range 3-14). The most frequently included BCTs were "provide instruction" (83% of the apps), "set graded tasks" (70%), and "prompt self-monitoring" (60%). Techniques such as "teach to use prompts/cues", "agree on behavioural contract", "relapse prevention" and "time management" were not present in the apps reviewed. Interrater reliability coefficients ranged from 0.1 to 0.9 (Mean 0.6, SD = 0.2). Presence of BCTs varied by app type and price; however, BCTs associated with increased intervention effectiveness were in general more common in paid apps. The taxonomy checklist can be used by independent raters to reliably identify BCTs in physical activity and dietary behaviour smartphone apps.

  1. Figure analysis: A teaching technique to promote visual literacy and active Learning.

    Science.gov (United States)

    Wiles, Amy M

    2016-07-08

    Learning often improves when active learning techniques are used in place of traditional lectures. For many of these techniques, however, students are expected to apply concepts that they have already grasped. A challenge, therefore, is how to incorporate active learning into the classroom of courses with heavy content, such as molecular-based biology courses. An additional challenge is that visual literacy is often overlooked in undergraduate science education. To address both of these challenges, a technique called figure analysis was developed and implemented in three different levels of undergraduate biology courses. Here, students learn content while gaining practice in interpreting visual information by discussing figures with their peers. Student groups also make connections between new and previously learned concepts on their own while in class. The instructor summarizes the material for the class only after students grapple with it in small groups. Students reported a preference for learning by figure analysis over traditional lecture, and female students in particular reported increased confidence in their analytical abilities. There is not a technology requirement for this technique; therefore, it may be utilized both in classrooms and in nontraditional spaces. Additionally, the amount of preparation required is comparable to that of a traditional lecture. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(4):336-344, 2016. © 2016 The International Union of Biochemistry and Molecular Biology.

  2. Trace element analysis at the Livermore pool-type reactor using neutron activation techniques

    International Nuclear Information System (INIS)

    Ragaini, R.C.; Ralston, R.; Garvis, D.

    1975-01-01

    The capabilities of trace element analysis at the Livermore Pool-Type Reactor (LPTR) using instrumental neutron activation analysis (INAA) are discussed. A description is given of the technology and the methods employed, including sample preparation, irradiation, and analysis. Applications of the INAA technique in past and current projects are described. A computer program, GAMANAL, has been used for nuclide identification and quantification. (U.S.)

  3. Understanding long-time vacancy aggregation in iron : a kinetic Activation-Relaxation Technique study

    OpenAIRE

    Brommer, Peter; Béland, Laurent Karim; Joly, Jean-Francois; Mousseau, N. (Normand)

    2014-01-01

    Vacancy diffusion and clustering processes in body-centered-cubic (bcc) Fe are studied using the kinetic activation-relaxation technique (k-ART), an off-lattice kinetic Monte Carlo method with on-the-fly catalog building capabilities. For monovacancies and divacancies, k-ART recovers previously published results while clustering in a 50-vacancy simulation box agrees with experimental estimates. Applying k-ART to the study of clustering pathways for systems containing from one to six vacancies...

  4. Active Vibration damping of Smart composite beams based on system identification technique

    Science.gov (United States)

    Bendine, Kouider; Satla, Zouaoui; Boukhoulda, Farouk Benallel; Nouari, Mohammed

    2018-03-01

    In the present paper, the active vibration control of a composite beam using piezoelectric actuator is investigated. The space state equation is determined using system identification technique based on the structure input output response provided by ANSYS APDL finite element package. The Linear Quadratic (LQG) control law is designed and integrated into ANSYS APDL to perform closed loop simulations. Numerical examples for different types of excitation loads are presented to test the efficiency and the accuracy of the proposed model.

  5. Study of some environmental problem in egypt using neutron activation analysis techniques

    International Nuclear Information System (INIS)

    El-Karim, A.H.M.G.

    2003-01-01

    this thesis deals with the investigation of the possibility of using the new (second) egyptian research reactor (ETRR-2) at Inshas (22 MW) for the neutron activation analysis (ANN) of trace elements, particularly in air dust, collected from cairo and some other cities of egypt. in this concern chapter 1 gives an introduction about the activation methods in general, describing the various techniques used and a comparison of the methods with other instrumental methods of analysis . as a main classification, the neutron activation methods involve prompt γ-ray NAA and delayed γ-ray NAA; cyclic NAA (repeated activation) was also outlined. the methodology of NAA involves the absolute method, the relative method and the mono standard (single comparator) method , which is in between the absolute and relative methods

  6. Effects of nanosuspension and inclusion complex techniques on the in vitro protease inhibitory activity of naproxen

    Energy Technology Data Exchange (ETDEWEB)

    Dharmalingam, Senthil Rajan; Chidambaram, Kumarappan; Srinivasan, Ramamurthy; Nadaraju, Shamala, E-mail: dsenthilrajan@yahoo.co.in [School of Pharmacy, International Medical University, Bukit Jalil, Kuala Lumpur (Malaysia)

    2014-01-15

    This study investigated the effects of nanosuspension and inclusion complex techniques on in vitro trypsin inhibitory activity of naproxen—a member of the propionic acid derivatives, which are a group of antipyretic, analgesic, and non-steroidal anti-inflammatory drugs. Nanosuspension and inclusion complex techniques were used to increase the solubility and anti-inflammatory efficacy of naproxen. The evaporative precipitation into aqueous solution (EPAS) technique and the kneading methods were used to prepare the nanosuspension and inclusion complex of naproxen, respectively. We also used an in vitro protease inhibitory assay to investigate the anti-inflammatory effect of modified naproxen formulations. Physiochemical properties of modified naproxen formulations were analyzed using UV, IR spectra, and solubility studies. Beta-cyclodextrin inclusion complex of naproxen was found to have a lower percentage of antitryptic activity than a pure nanosuspension of naproxen did. In conclusion, nanosuspension of naproxen has a greater anti-inflammatory effect than the other two tested formulations. This is because the nanosuspension formulation reduces the particle size of naproxen. Based on these results, the antitryptic activity of naproxen nanosuspension was noteworthy; therefore, this formulation can be used for the management of inflammatory disorders. (author)

  7. Active release technique in hamstrings strain: Rehabilitation and return to play – a case study

    Directory of Open Access Journals (Sweden)

    Hariharasudhan Ravichandran

    2017-01-01

    Full Text Available Hamstring injuries and its rehabilitation in competitive events such as football targets safe and early return to play. This is because hamstring injuries are more related to prolonged recovery time and high rate of re-injury. In this case study, Zakeer Mundampara, 26-year-old footballer of Chennaiyin FC team (Indian super league tournament, who was rehabilitated for Grade 2 hamstring strain was briefed. To describe the importance of conservative rehabilitation in hamstring injuries and report on player's rehabilitation program and clinical outcome. Zakeer Mundampara was conservatively treated with active release technique for 2 weeks duration. Data collected includes passive knee extension test range of motion and verbal rating score. After 2 weeks of rehabilitation, Zakeer Mundampara had nearly full range of pain-free movement, normal gait and trained to run safely. By the 3rd week, he started to perform all sports specific drills. He was rehabilitated and set fit to play after 4 weeks from the date of injury. Active release technique is effective in hamstring injuries. In this case study, rehabilitation program with an emphasis on active release technique is found to be effective in returning the footballer back to play.

  8. Study on bioavailability of zinc for children's diet by using activable isotopic tracer 70Zn and neutron activation analysis techniques

    International Nuclear Information System (INIS)

    Zhang Yangmei; Ni Bangfa; Wang Pingsheng; Tian Weizhi; Cao Lei

    2001-01-01

    Bioavailability of zinc for three groups (low amount of diet zinc, balance amount of diet zinc and high amount of diet zinc) of children's diet is studied by using activable isotopic tracer 70 Zn and neutron activation analysis techniques. The results indicate that the fractional absorption of zinc from balance diet zinc group is the highest, up to 33.9%. A procedure of pre-irradiation concentration zinc for fecal samples using anion exchanger is developed, and the enriched 70 Zn with isotopic abundance of 18.3% is used for tracer. The mass ratios between 70 Zn and 68 Zn or 64 Zn and their contents between natural zinc and enriched zinc are used to calculate the bioavailability of zinc. Instrumental neutron activation analysis of 64 Zn of each original fecal samples and pre-irradiation concentrated zinc samples are used to normalize the chemical yield in order to reduce the uncertainty during the chemical separation procedure

  9. Soil zymography - A novel technique for mapping enzyme activity in the rhizosphere

    Science.gov (United States)

    Spohn, Marie

    2014-05-01

    The effect plant roots on microbial activity in soil at the millimeter scale is poorly understood. One reason for this is that spatially explicit methods for the study of microbial activity in soil are limited. Here we present a quantitative in situ technique for mapping the distribution of exoenzymes in soil along with some results about the effects of roots on exoenzyme activity in soil. In the first study we showed that both acid and alkaline phosphatase activity were up to 5.4-times larger in the rhizosphere of Lupinus albus than in the bulk soil. While acid phosphatase activity (produced by roots and microorganisms) was closely associated with roots, alkaline phosphatase activity (produced only by microorganisms) was more widely distributed, leading to a 2.5-times larger area of activity of alkaline than of acid phosphatase. These results indicate a spatial differentiation of different ecophysiological groups of organic phosphorus mineralizing organisms in the rhizosphere which might alleviate a potential competition for phosphorus between them. In a second study cellulase, chitinase and phosphatase activities were analyzed in the presence of living Lupinus polyphyllus roots and dead/dying roots (in the same soils 10, 20 and 30 days after cutting the L. polyphyllus shoots). The activity of all three enzymes was 9.0 to 13.9-times higher at the living roots compared to the bulk soil. Microhotspots of cellulase, chitinase and phosphatase activity in the soil were found up to 60 mm away from the living roots. 10 days after shoot cutting, the areas of high activities of cellulase and phosphatase activity were extend up to 55 mm away from the next root, while the extension of the area of chitinase activity did not change significantly. At the root, cellulase and chitinase activity increased first at the root tips after shoot cutting and showed maximal activity 20 days after shoot cutting. The number and activity of microhotspots of chitinase activity was maximal 10

  10. Quantitation of microbicidal activity of mononuclear phagocytes: an in vitro technique.

    Directory of Open Access Journals (Sweden)

    Rege N

    1993-01-01

    Full Text Available An in vitro assay technique was set up to determine the phagocytic and microbicidal activity of a monocyte-macrophage cell line using Candida species as test organisms. The norms were determined for the activity of peritoneal macrophages of rats (24.69 +/- 2.6% phagocytosis and 35.4 +/- 5.22% ICK and human (27.89 +/- 3.63% phagocytosis and 50.91 +/- 6.3% ICK. The assay technique was used to test the degree of activation of macrophages induced by metronidazole, Tinospora cordifolia and Asparaqus racemousus and to compare their effects with a standard immunomodulator muramyl-dipeptide. All the three test agents increased the phagocytic and killing capacity of macrophages in a dose dependent manner upto a certain dose, beyond which either these activities were found to have plateaued or decreased. The optimal doses for MDP, Metronidazole, Asparagus racemosus and Tinospora cordifolia were found to be 100 micrograms, 300 mg/kg, 200 mg/kg and 100 mg/kg respectively. Patients with cirrhosis were screened for defects in monocyte function. The depressed monocyte function (20.58 +/- 5% phago and 41.24 +/- 12.19% ICK; P < 0.05 was observed indicating a compromised host defense. The utility of this candidicidal assay in experimental and clinical studies is discussed.

  11. Determination of moisture content and water activity in algae and fish by thermoanalytical techniques

    Directory of Open Access Journals (Sweden)

    Vilma Mota da Silva

    2008-01-01

    Full Text Available The water content in seafoods is very important since it affects their sensorial quality, microbiological stability, physical characteristics and shelf life. In this study, thermoanalytical techniques were employed to develop a simple and accurate method to determine water content (moisture by thermogravimetry (TG and water activity from moisture content values and freezing point depression using differential scanning calorimetry (DSC. The precision of the results suggests that TG is a suitable technique to determine moisture content in biological samples. The average water content values for fish samples of Lutjanus synagris and Ocyurus chrysurus species were 76.4 ± 5.7% and 63.3 ± 3.9%, respectively, while that of Ulva lactuca marine algae species was 76.0 ± 4.4%. The method presented here was also successfully applied to determine water activity in two species of fish and six species of marine algae collected in the Atlantic coastal waters of Bahia, in Brazil. Water activity determined in fish samples ranged from 0.946 - 0.960 and was consistent with values reported in the literature, i.e., 0.9 - 1.0. The water activity values determined in marine algae samples lay within the interval of 0.974 - 0.979.

  12. A multi coding technique to reduce transition activity in VLSI circuits

    International Nuclear Information System (INIS)

    Vithyalakshmi, N.; Rajaram, M.

    2014-01-01

    Advances in VLSI technology have enabled the implementation of complex digital circuits in a single chip, reducing system size and power consumption. In deep submicron low power CMOS VLSI design, the main cause of energy dissipation is charging and discharging of internal node capacitances due to transition activity. Transition activity is one of the major factors that also affect the dynamic power dissipation. This paper proposes power reduction analyzed through algorithm and logic circuit levels. In algorithm level the key aspect of reducing power dissipation is by minimizing transition activity and is achieved by introducing a data coding technique. So a novel multi coding technique is introduced to improve the efficiency of transition activity up to 52.3% on the bus lines, which will automatically reduce the dynamic power dissipation. In addition, 1 bit full adders are introduced in the Hamming distance estimator block, which reduces the device count. This coding method is implemented using Verilog HDL. The overall performance is analyzed by using Modelsim and Xilinx Tools. In total 38.2% power saving capability is achieved compared to other existing methods. (semiconductor technology)

  13. Application of radiobiological techniques in studying antioxidant mechanisms: evaluation of their radioprotective, antioxidative and antiviral activities

    International Nuclear Information System (INIS)

    Hmamouchi, M.

    2000-01-01

    In the medical field, the oxidation phenomenon is the source of several pathologies (diabetes, cystic fibrosis, cancers,...). The natural oxidants are used as food preserving and skin ageing moderators. Several plant extracts with antioxidant activity were studied, this important antioxidant activity is probably due to their richness of compounds: polyphenols, phenolic acids, tocopherols, carotenoids, flavonoids,... Many techniques for evaluation and reactional mechanism study of the antioxidative activity are used. After selection, extraction, fractionation, activity screening, chemical analyses of molecules contained in the best active extracts, biological properties research of isolated redox pharmacophore, we have : - determined the structure of active products by spectroscopy and chromatography; - studied the antioxidative properties by EPR and spin trapping of the obtained extracts and molecules. The results of this first part of our work consists in evaluating the antioxidative degree of a great number of natural active principles, extracted from moroccan plants and pur obtained products. The second part consists in studying the action mechanisms using the LDL labelling (F. M.)

  14. Spherical crystallization: A technique use to reform solubility and flow property of active pharmaceutical ingredients.

    Science.gov (United States)

    Chatterjee, Arindam; Gupta, Madan Mohan; Srivastava, Birendra

    2017-01-01

    Tablets have been choice of manufacturers over the years due to their comparatively low cost of manufacturing, packaging, shipping, and ease of administration; also have better stability and can be considered virtually tamper proof. A major challenge in formulation development of the tablets extends from lower solubility of the active agent to the elaborated manufacturing procedures for obtaining a compressible granular material. Moreover, the validation and documentation increases, as the numbers of steps increases for an industrially acceptable granulation process. Spherical crystallization (SC) is a promising technique, which encompass the crystallization, agglomeration, and spheronization phenomenon in a single step. Initially, two methods, spherical agglomeration, and emulsion solvent diffusion, were suggested to get a desired result. Later on, the introduction of modified methods such as crystallo-co-agglomeration, ammonia diffusion system, and neutralization techniques overcame the limitations of the older techniques. Under controlled conditions such as solvent composition, mixing rate and temperature, spherical dense agglomerates cluster from particles. Application of the SC technique includes production of compacted spherical particles of drug having improved uniformity in shape and size of particles, good bulk density, better flow properties as well as better solubility so SC when used on commercial scale will bring down the production costs of pharmaceutical tablet and will increase revenue for the pharmaceutical industries in the competitive market. This review summarizes the technologies available for SC and also suggests the parameters for evaluation of a viable product.

  15. Debris removal from artificial grooves using different endodontic irrigation activation techniques: ex vivo

    Directory of Open Access Journals (Sweden)

    Mügem Aslı Ekici

    2016-12-01

    Full Text Available Objective: The aim of this study was to compare the debris removal efficiency of different irrigation activation techniques from artificially formed endodontic grooves. Materials and Method: Crowns of twenty maxillary incisor teeth were removed and the root canals were prepared. Specimens were embedded in acrylic resin and placed into teflon molds. Acrylic resin blocks were removed from the molds and split longitudinally into equal two halves. A standardized artificial groove (4 mm x 0.2 mm x 0.5 mm was prepared at 2 mm distance from the apex and filled with dentinal debris. Acrylic resin blocks were placed into the teflon mold again and compressed. Four different irrigation activation techniques; Manual Dynamic Irrigation (MDI, Passive Ultrasonic Irrigation (PUI, Sonic Irrigation (SI and Apical Negative Pressure Irrigation (ANPI were used for debris removal. Conventional Irrigation (CI was applied as control. For standardization, each specimen was cleaned and reused (n=20. Before and after irrigation, images of the grooves were taken by using an operating microscope at x30 magnification. Amount of remaining debris was evaluated by using a scoring system. Data were analyzed by using Kruskall-Wallis and Mann-Whitney U tests (α=0.05. Results: There were statistically significant differences between the experimental groups (p0.05. Conclusion: PUI yielded the lowest debris scores. A simple and low-cost technique, MDI, yielded similar results with PUI.

  16. Anatomic and Pathologic Variability During Radiotherapy for a Hybrid Active Breath-Hold Gating Technique

    International Nuclear Information System (INIS)

    Glide-Hurst, Carri K.; Gopan, Ellen; Hugo, Geoffrey D.

    2010-01-01

    Purpose: To evaluate intra- and interfraction variability of tumor and lung volume and position using a hybrid active breath-hold gating technique. Methods and Materials: A total of 159 repeat normal inspiration active breath-hold CTs were acquired weekly during radiotherapy for 9 lung cancer patients (12-21 scans per patient). A physician delineated the gross tumor volume (GTV), lungs, and spinal cord on the first breath-hold CT, and contours were propagated semiautomatically. Intra- and interfraction variability of tumor and lung position and volume were evaluated. Tumor centroid and border variability were quantified. Results: On average, intrafraction variability of lung and GTV centroid position was 0.1). Increases in free-breathing tidal volume were associated with increases in breath-hold ipsilateral lung volume (p < 0.05). Conclusions: The breath-hold technique was reproducible within 2 mm during each fraction. Interfraction variability of GTV position and shape was substantial because of tumor volume and breath-hold lung volume change during therapy. These results support the feasibility of a hybrid breath-hold gating technique and suggest that online image guidance would be beneficial.

  17. Study on bioavailability of dietary iron of women by using activable isotopic tracer and neutron activation analysis techniques

    International Nuclear Information System (INIS)

    Zhang Yangmei; Ni Bangfa; Tian Weizhi; Wang Pingsheng; Cao Lei

    2002-01-01

    The bioavailability of diet iron of 10 healthy young women in Beijing area is studied by using two enriched isotopes 54 Fe and 58 Fe, and neutron activation analysis techniques. The abundance of 54 Fe and 58 Fe is 61.4% and 23.4%, respectively. In additional, the atomic absorption spectrometry is employed to measure total iron in fecal samples. Dysprosium, rarely absorbed by human body, is used to monitor the residence time of tracer isotopes in order to collect the fecal samples completely. The results show that the bioavailability of dietary iron in young women is (14.9 +- 3.9)%

  18. A Novel (DDCC-SFG-Based Systematic Design Technique of Active Filters

    Directory of Open Access Journals (Sweden)

    M. Fakhfakh

    2013-09-01

    Full Text Available This paper proposes a novel idea for the synthesis of active filters that is based on the use of signal-flow graph (SFG stamps of differential difference current conveyors (DDCCs. On the basis of an RLC passive network or a filter symbolic transfer function, an equivalent SFG is constructed. DDCCs’ SFGs are identified inside the constructed ‘active’ graph, and thus the equivalent circuit can be easily synthesized. We show that the DDCC and its ‘derivatives’, i.e. differential voltage current conveyors and the conventional current conveyors, are the main basic building blocks in such design. The practicability of the proposed technique is showcased via three application examples. Spice simulations are given to show the viability of the proposed technique.

  19. The determination of pesticide residues in local vegetables by means of neutron activation technique

    International Nuclear Information System (INIS)

    Mongkolphantha, S.; Karasuddhi, P.; Yamkate, P.; Serichareonsatit, N.

    1975-01-01

    Analytical methods based on neutron activation have been developed for studying pesticides residues of bromine, arsenic and mercury in local vegetables and fruits. The concentration of bromine, arsenic and mercury in samples are enriched prior to neutron irradiations by a technique of dry-ashing and freeze-drying for the determination of arsenic, bromine and mercury respectively. The element bromine is determined instrumentally while arsenic and mercury are determined destructively using a distillation technique. The limit of detection under the conditions used for bromine, arsenic and mercury as obtained are 0.01, 0.001 and 0.0001 microgram respectively. A total of 45 varieties of vegetables and 20 varieties of fruits are analyzed. The results of the investigation and the concentration range in part per million of bromine, arsenic and mercury are also presented

  20. Induced modifications on algae photosynthetic activity monitored by pump-and-probe technique

    Energy Technology Data Exchange (ETDEWEB)

    Barbini, R.; Colao, F.; Fantoni, R.; Palucci, A.; Ribezzo, S. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dip. Innovazione; Tarzillo, G.; Carlozzi, P.; Pelosi, E. [CNR, Florence (Italy). Centro Studi Microorganismi Autotrofi

    1995-12-01

    The lidar fluorosensor system available at ENEA Frascati has been used for a series of laboratory measurements on brackish-water and marine phytoplankton grown in laboratory with the proper saline solution. The system, already used to measure the laser induced fluorescence spectra of different algae species and their detection limits, has been upgraded with a short pulse Nd:YAG laser and rearranged to test a new technique based on laser pump and probe excitation. Results of this new technique for remote monitoring of the in-vivo photosynthetic activity will be presented, as measured during a field campaign carried out in Florence during the Autumn 1993, where the effects of an actinic saturating light and different chemicals have also been checked.

  1. Implementation of behavior change techniques in mobile applications for physical activity.

    Science.gov (United States)

    Yang, Chih-Hsiang; Maher, Jaclyn P; Conroy, David E

    2015-04-01

    Mobile applications (apps) for physical activity are popular and hold promise for promoting behavior change and reducing non-communicable disease risk. App marketing materials describe a limited number of behavior change techniques (BCTs), but apps may include unmarketed BCTs, which are important as well. To characterize the extent to which BCTs have been implemented in apps from a systematic user inspection of apps. Top-ranked physical activity apps (N=100) were identified in November 2013 and analyzed in 2014. BCTs were coded using a contemporary taxonomy following a user inspection of apps. Users identified an average of 6.6 BCTs per app and most BCTs in the taxonomy were not represented in any apps. The most common BCTs involved providing social support, information about others' approval, instructions on how to perform a behavior, demonstrations of the behavior, and feedback on the behavior. A latent class analysis of BCT configurations revealed that apps focused on providing support and feedback as well as support and education. Contemporary physical activity apps have implemented a limited number of BCTs and have favored BCTs with a modest evidence base over others with more established evidence of efficacy (e.g., social media integration for providing social support versus active self-monitoring by users). Social support is a ubiquitous feature of contemporary physical activity apps and differences between apps lie primarily in whether the limited BCTs provide education or feedback about physical activity. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  2. Effects of Active and Passive Control Techniques on Mach 1.5 Cavity Flow Dynamics

    Directory of Open Access Journals (Sweden)

    Selin Aradag

    2017-01-01

    Full Text Available Supersonic flow over cavities has been of interest since 1960s because cavities represent the bomb bays of aircraft. The flow is transient, turbulent, and complicated. Pressure fluctuations inside the cavity can impede successful weapon release. The objective of this study is to use active and passive control methods on supersonic cavity flow numerically to decrease or eliminate pressure oscillations. Jet blowing at several locations on the front and aft walls of the cavity configuration is used as an active control method. Several techniques are used for passive control including using a cover plate to separate the flow dynamics inside and outside of the cavity, trailing edge wall modifications, such as inclination of the trailing edge, and providing curvature to the trailing edge wall. The results of active and passive control techniques are compared with the baseline case in terms of pressure fluctuations, sound pressure levels at the leading edge, trailing edge walls, and cavity floor and in terms of formation of the flow structures and the results are presented. It is observed from the results that modification of the trailing edge wall is the most effective of the control methods tested leading to up to 40 dB reductions in cavity tones.

  3. Active load sharing technique for on-line efficiency optimization in DC microgrids

    DEFF Research Database (Denmark)

    Sanseverino, E. Riva; Zizzo, G.; Boscaino, V.

    2017-01-01

    -DC converters, is modeled. An active load sharing technique is proposed for the on-line optimization of the global efficiency of the DC distribution network. The algorithm aims at the instantaneous efficiency optimization of the whole DC network, based on the on-line load current sampling. A Look Up Table......, is created to store the real efficiencies of the converters taking into account components tolerances. A MATLAB/Simulink model of the DC distribution network has been set up and a Genetic Algorithm has been employed for the global efficiency optimization. Simulation results are shown to validate the proposed...

  4. Investigation of an egyptian phosphate ore sample by neutron activation analysis technique

    International Nuclear Information System (INIS)

    Eissa, E.A.; Aly, R.A.; Rofail, N.B.; Hassan, A.M.

    1995-01-01

    A domestic phosphate ore sample has been analysed by means of prompt and delayed gamma-ray spectrometry following the activation by thermal neutron capture technique. The rabbit pneumatic transfer system (RPTS), long irradiation facility and two Pu/Be (2,5 Ci each) neutron sources set-Pu for prompt (n,gamma) were applied. The high purity germanium (HPGe) gamma-ray spectrometer with a personal computer analyzer (PCA) system were used for spectrum measurements. Programmes on the VAX computer were utilized for estimating the elemental concentrations of 22 out of 36 elements identified in this work. 2 tabs

  5. Studies of Some Parameters Affecting The Efficiency and Accuracy of The Neutron Activation Analysis Technique

    International Nuclear Information System (INIS)

    Abdel-Haleem, A.S.; Zaghloul, R.A.; Sroor, A.; Abdel Sabour, M.F.

    2000-01-01

    The present studies deal with the optimum physical conditions which seriously affect the neutron activation analysis technique efficiency. An experimental work for the efficiency calibration of hyper pure germanium detectors especially for environmental studies is presented. This work showed that the tested parameters, under consideration, distance, mass and measured time, reveal a significant effect on the obtained data. These results, intern, affect the accuracy of the measurements. Further work on the test of other parameters is planned in our laboratory using special treatments and applying special computer programs

  6. Investigation of Lecturer's Chalk by x-ray Florescence and Fast Neutron Activation Techniques

    International Nuclear Information System (INIS)

    Hassan, M.F.

    2011-01-01

    Different samples of lecturer's chalk were studied, using X-ray florescence (XRF) and Fast Neutron Activation Analysis (FNAA) techniques to ensure the safety of its use. The K (X-rays) and the gamma-rays were measured, using Si(Li) and high-purity germanium (HPGe) spectrometers to detect and determine qualitatively and quantitatively the constituents of the studied samples. The concentrations of the elements (Ca and small traces of Al, Fe, Mg and Si) were measured and their presence was confirmed by gamma-ray, lifetime and/or XRF measurements.

  7. Elemental investigation of talcum baby powder by X-Ray florescence and fast neutron activation Techniques

    International Nuclear Information System (INIS)

    Hassan, M. F.; Abd El Wahab, M.; Nada, A.

    2008-01-01

    Different samples of Egyptian and Hungarian talcum powders were studied, using X-ray florescence (XRF) and Fast Neutron Activation Analysis (FNAA) techniques to ensure the safety of its use. The K (X-rays) and the gamma-rays were measured, using Si(Li) and high-purity germanium (HPGe) spectrometers to detect and determine qualitatively and quantitatively the constituents of the studied samples. The concentrations of the elements (Mg, Si, Al, Fe, Zn, and Ba) were measured and their presence was confirmed by X-ray, lifetime and/or XRF measurements. One of these samples was also studied, using the Environmental Scanning Electron Microscope (ESEM)

  8. What Are the Most Effective Intervention Techniques for Changing Physical Activity Self-Efficacy and Physical Activity Behaviour--and Are They the Same?

    Science.gov (United States)

    Williams, S. L.; French, D. P.

    2011-01-01

    There is convincing evidence that targeting self-efficacy is an effective means of increasing physical activity. However, evidence concerning which are the most effective techniques for changing self-efficacy and thereby physical activity is lacking. The present review aims to estimate the association between specific intervention techniques used…

  9. Sports activity after anatomic acromioclavicular joint stabilisation with flip-button technique.

    Science.gov (United States)

    Porschke, Felix; Schnetzke, Marc; Aytac, Sara; Studier-Fischer, Stefan; Gruetzner, Paul Alfred; Guehring, Thorsten

    2017-07-01

    Sports activity after surgical AC joint stabilisation has not been comprehensively evaluated to date. The aim of this study was to determine rate, level and time to return to sports after AC joint stabilisation and to identify the influence of overhead sports on post-operative sports activity. In this retrospective case series, a total of 68 patients with a high-grade AC joint dislocation (Rockwood type V) were stabilised using a single TightRope technique. Fifty-five patients (80.9 %) with median age of 42.0 (range, 18-65) years completed questionnaires regarding sports activity before and after surgery. Clinical outcome and complications were also evaluated. Forty-three patients participated in sports regularly before injury. Their sports activity was rated according to Allain, and non-overhead and overhead sports were differentiated. At median follow-up of 24 (18-45) months, 41 of 43 patients (95.3 %) had returned to sports. 63 % returned to the same sports activity as before injury. 16.3 % needed to adapt the type of sports to reduce demanding activities. 11.6 % reduced the frequency and 32.5 % the intensity of sports. The median time to return to sports was 9.5 (3-18) months. Overhead athletes (Allain Type III and IV) had to reduce their sports activity significantly more often (11.8 vs. 53.8 %; p = 0.011) and needed more time to return to sports (9.5 vs. 4.5 months; p = 0.009). After stabilisation of AC joint dislocation, the majority of patients returned to sports after a substantial period of time. Overhead athletes, in particular, required more time and had to considerably reduce their sports activity. The findings impact therapeutic decision-making after AC joint injury and help with the prognosis and assessment of rehabilitation progress. IV.

  10. Excitation functions of natZn(p,x) nuclear reactions with proton beam energy below 18 MeV

    OpenAIRE

    Asad, A. H.; Chan, S.; Morandeau, L.; Cryer, D.; Smith, S. V.; Price, R. I.

    2015-01-01

    Introduction We measured the excitation functions of natZn (p,x) reactions up to 17.6 MeV using the stacked-foils activation technique. High-purity natural zinc (and copper) foils were irradiated with proton beams from an 18MeV medical cyclotron, the predominant purpose of which is to provide a routine regional service for clinical PET radiopharmaceuticals. Thick-target integral yields were also deduced from the measured excitation functions of the produced radioisotopes. These results we...

  11. Pre-equilibrium decay process in alpha particle induced reactions on thulium and tantalum

    International Nuclear Information System (INIS)

    Mohan, Rao, A.V.; Chintalapudi, S.N.

    1994-01-01

    Alpha particle induced reactions on the target elements Thulium and Tantalum were investigated upto 60 MeV using stacked foil activation technique and Ge(Li) gamma ray spectroscopy method. Excitation functions for six reactions of 169 Tm(α,xn); x=1-4 and 181 Ta(α,xn); x=2,4 were studied. The experimental results were compared with the updated version of Hybrid model (ALICE/90) using initial exciton configuration n 0 =4(4pOh). A general agreement was found for all the reactions with this option. (author)

  12. Pre-equilibrium decay process in alpha particle induced reactions on thulium and tantalum

    Energy Technology Data Exchange (ETDEWEB)

    Mohan, Rao, A.V.; Chintalapudi, S.N. (Inter Univ. Consortium for Dept. of atomic Energy Facilities, Calcutta (India))

    1994-01-01

    Alpha particle induced reactions on the target elements Thulium and Tantalum were investigated upto 60 MeV using stacked foil activation technique and Ge(Li) gamma ray spectroscopy method. Excitation functions for six reactions of [sup 169]Tm([alpha],xn); x=1-4 and [sup 181]Ta([alpha],xn); x=2,4 were studied. The experimental results were compared with the updated version of Hybrid model (ALICE/90) using initial exciton configuration n[sub 0]=4(4pOh). A general agreement was found for all the reactions with this option. (author).

  13. Different parameter and technique affecting the rate of evaporation on active solar still -a review

    Science.gov (United States)

    A, Muthu Manokar; D, Prince Winston; A. E, Kabeel; Sathyamurthy, Ravishankar; T, Arunkumar

    2017-10-01

    Water is one of the essential sources for the endurance of human on the earth. As earth having only a small amount of water resources for consumption purpose people in rural and urban areas are getting affected by consuming dirty water that leads to water-borne diseases. Even though ground water is available in small quantity, it has to be treated properly before its use for internal consumption. Brackish water contains dissolve and undissolved contents, and hence it is not suitable for the household purpose. Nowadays, distillation process is done by using passive and active solar stills. The major problem in using passive solar still is meeting higher demand for fresh water. The fresh water production from passive solar still is critically low to meet the demand. To improve the productivity of conventional solar still, input feed water is preheated by integrating the solar still to different collector panels. In this review article, the different parameters that affect the rate of evaporation in an active solar still and the different methods incorporated has been presented. In addition to active distillation system, forced convection technique can be incorporated to increase the yield of fresh water by decreasing the temperature of cover. Furthermore, it is identified that the yield of fresh water from the active desalination system can be improved by sensible and latent heat energy storage. This review will motivate the researchers to decide appropriate active solar still technology for promoting development.

  14. Different parameter and technique affecting the rate of evaporation on active solar still -a review

    Science.gov (United States)

    A, Muthu Manokar; D, Prince Winston; A. E, Kabeel; Sathyamurthy, Ravishankar; T, Arunkumar

    2018-03-01

    Water is one of the essential sources for the endurance of human on the earth. As earth having only a small amount of water resources for consumption purpose people in rural and urban areas are getting affected by consuming dirty water that leads to water-borne diseases. Even though ground water is available in small quantity, it has to be treated properly before its use for internal consumption. Brackish water contains dissolve and undissolved contents, and hence it is not suitable for the household purpose. Nowadays, distillation process is done by using passive and active solar stills. The major problem in using passive solar still is meeting higher demand for fresh water. The fresh water production from passive solar still is critically low to meet the demand. To improve the productivity of conventional solar still, input feed water is preheated by integrating the solar still to different collector panels. In this review article, the different parameters that affect the rate of evaporation in an active solar still and the different methods incorporated has been presented. In addition to active distillation system, forced convection technique can be incorporated to increase the yield of fresh water by decreasing the temperature of cover. Furthermore, it is identified that the yield of fresh water from the active desalination system can be improved by sensible and latent heat energy storage. This review will motivate the researchers to decide appropriate active solar still technology for promoting development.

  15. Enhancing Student Self-Study Attitude and Activity with Motivational Techniques

    Directory of Open Access Journals (Sweden)

    Kent Rhoads

    2013-09-01

    Full Text Available Research has shown that students will exhibit a positive attitude towards self-study, but that they will often fail to complete self-study activities. The purpose of this paper is to investigate positive instructor interactions and motivation of students to complete self- study activities and students’ attitudes towards self-study. Six English instructors at the University of Shizuoka created a one-semester self-access study log for use in the university self-access language laboratory in order to find out how many students would complete the log. One of the six instructors applied motivational techniques in the classroom in an effort to engender greater student self-study. Later a questionnaire was administered to 465 student participants to determine their self-study attitudes and activities. The data collected from the questionnaire and the high participation in the self- study activities suggest the positive impact the motivational actions employed by the instructor had on his students' attitudes towards self-study activities.

  16. Analyzing Activity Behavior and Movement in a Naturalistic Environment Using Smart Home Techniques.

    Science.gov (United States)

    Cook, Diane J; Schmitter-Edgecombe, Maureen; Dawadi, Prafulla

    2015-11-01

    One of the many services that intelligent systems can provide is the ability to analyze the impact of different medical conditions on daily behavior. In this study, we use smart home and wearable sensors to collect data, while ( n = 84) older adults perform complex activities of daily living. We analyze the data using machine learning techniques and reveal that differences between healthy older adults and adults with Parkinson disease not only exist in their activity patterns, but that these differences can be automatically recognized. Our machine learning classifiers reach an accuracy of 0.97 with an area under the ROC curve value of 0.97 in distinguishing these groups. Our permutation-based testing confirms that the sensor-based differences between these groups are statistically significant.

  17. Neutron dose measurements in PET medical cyclotron by foil activation technique

    International Nuclear Information System (INIS)

    Deepa, S.; Sathian, V.; Phadnis, U.V.; Pal, Rupali; Jayalakshmi, V.; Chaurasiya, G.; Kannan, S.; Soni, P.S.

    2007-01-01

    Radionuclides are being used in diagnostic purpose as well as therapeutic purpose under medical category for early detection of malignancies, the diagnosis using radionuclides are playing very important role. PET scan is a miles stone in medical history. These scan is done using a positron emitter 18 F. This radionuclide is produced by the reaction 18 O (p, n) 18 F. In RMC this is produced using accelerated proton using cyclotron. The neutron production is an unwanted by product. These neutrons will make lot of radiation protection problem as neutron itself and also these neutrons will produce induced activity in the different elements of cyclotron shielding material as well as the wall materials in long run. So the accurate neutron dose measurement is very important. The measurement of neutron dose in cyclotron of RMC using activation foil technique is presented in this paper

  18. Novel Technique and Technologies for Active Optical Remote Sensing of Greenhouse Gases

    Science.gov (United States)

    Singh, Upendra N.; Refaat, Tamer F.; Petros, Mulugeta

    2017-01-01

    The societal benefits of understanding climate change through identification of global carbon dioxide sources and sinks led to the desired NASA's active sensing of carbon dioxide emissions over nights, days, and seasons (ASCENDS) space-based missions of global carbon dioxide measurements. For more than 15 years, NASA Langley Research Center (LaRC) have developed several carbon dioxide active remote sensors using the differential absorption lidar (DIAL) technique operating at the two-micron wavelength. Currently, an airborne two-micron triple-pulse integrated path differential absorption (IPDA) lidar is under development. This IPDA lidar measures carbon dioxide as well as water vapor, the dominant interfering molecule on carbon dioxide remote sensing. Advancement of this triple-pulse IPDA lidar development is presented.

  19. THE GAME TECHNIQUE NTCHNIQUE STIMULATING LEARNING ACTIVITY OF JUNIOR STUDENTS SPECIALIZING IN ECONOMICS

    Directory of Open Access Journals (Sweden)

    Juri. S. Ezrokh

    2014-01-01

    Full Text Available The research is aimed at specifying and developing the modern control system of current academic achievements of junior university students; and the main task is to find the adequate ways for stimulating the junior students’ learning activities, and estimating their individual achievements.Methods: The author applies his own assessment method for estimating and stimulating students’ learning outcomes, based on the rating-point system of gradually obtained points building up a student’s integrated learning outcomes.Results: The research findings prove that implementation of the given method can increase the motivational, multiplicative and controlling components of the learning process.Scientific novelty: The method in question is based on the new original game approach to controlling procedures and stimulation of learning motivation of the economic profile students.Practical significance: The recommended technique can intensify the incentivebased training activities both in and outside a classroom, developing thereby students’ professional and personal qualities.

  20. Survival of the Fittest: An Active Queue Management Technique for Noisy Packet Flows

    Directory of Open Access Journals (Sweden)

    Shirish S. Karande

    2007-01-01

    Full Text Available We present a novel active queue management (AQM technique to demonstrate the efficacy of practically harnessing the predictive utility of SSR indications for improved video communication. We consider a network within which corrupted packets are relayed over multiple hops, but a certain percentage of packets needs to be dropped at an intermediate node due to congestion. We propose an AQM technique, survival of the fittest (SOTF, to be employed at the relay node, within which we use packet state information, available from SSR indications and checksums, to drop packets with the highest corruption levels. On the basis of actual 802.11b measurements we show that such a side information (SI aware processing within the network can provide significant performance benefits over an SI-unaware scheme, random queue management (RQM, which is forced to randomly discard packets. With trace-based simulations, we show the utility of the proposed AQM technique in improving the error recovery performance of cross-layer FEC schemes. Finally, with the help of H.264-based video simulations these improvements are shown to translate into a significant improvement in video quality.

  1. Comparison of Smear Layer Removal Ability of QMix with Different Activation Techniques.

    Science.gov (United States)

    Arslan, Dilara; Guneser, Mehmet Burak; Dincer, Asiye Nur; Kustarci, Alper; Er, Kursat; Siso, Seyda Herguner

    2016-08-01

    To evaluate the effectiveness of QMix solution (Dentsply Tulsa Dental Specialties, Tulsa, OK) on the smear layer using the following irrigation activation techniques: the EndoActivator (EA) system (Dentsply Tulsa Dental Specialties), photon-initiated photoacoustic streaming (PIPS), and an Er:YAG laser with an endodontic fiber tip. Sixty-four extracted single-rooted human teeth were decoronated and the canals instrumented with ProTaper (Denstply Maillefer, Ballagues, Switzerland) up to size F4. The canals were irrigated with 5.25% sodium hypochlorite and a saline solution for 1 minute each. The specimens were then divided randomly into 4 experimental and 4 control groups (n = 8) according to the final irrigation activation technique. These groups included group 1, 2.5 mL QMix; group 2, QMix + EA; group 3, QMix + PIPS; and group 4: QMix + Er:YAG. Laser activated distilled water was used as control groups 5, 6, 7, and 8. Teeth were split longitudinally, and specimens were observed under a scanning electron microscope. Images were taken at the coronal, middle, and apical thirds of the teeth at a magnification of 1000× and were scored in the presence of the smear layer. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests. The highest scores were found in the apical third of all groups (P < .05). The QMix + Er:YAG group removed the smear layer more effectively than the nonactivated QMix group in the apical third (P < .05). The QMix + EA group removed the smear layer significantly in all thirds of the teeth when compared with the nonactivated QMix group (P < .05). The QMix + PIPS group showed a significantly better effect than the QMix group in the coronal third (P < .05). The EA and Er:YAG laser enhanced the smear layer removal ability of QMix in the apical thirds of the canals. QMix removed more smear layer in the coronal thirds when activated with the PIPS technique. Copyright © 2016. Published by Elsevier Inc.

  2. Trace elements in California aerosols. Part I. Instrumental neutron activation analysis techniques

    International Nuclear Information System (INIS)

    Ragaini, R.C.; Ralston, H.R.; Garvis, D.; Kaifer, R.

    1975-01-01

    Instrumental Neutron Activation Analysis (INAA) done at LLL played a key role in the 1972--1974 California Aerosol Characterization Experiment (ACHEX), a major experiment in the chemistry of aerosols in urban and non-urban sites of California sponsored by the State of California Air Resources Board. The main purpose of INAA was to measure the particle size distributions and diurnal patterns of key chemical constituents in aerosols collected in California. These data were used to satisfy some of the key objectives of ACHEX, including aerosol characterization and evaluation of the origins and evolutions of aerosols. Secondary uses of INAA were the validations of the Lundgren rotating drum cascade impactors used in the ACHEX, and validations of other analytical techniques used in the chemical analyses. As a result of these studies, it was concluded that techniques using INAA were useful operational methods for chemical analysis of aerosols collected over two-hour periods in urban air with an active monitoring program. (U.S.)

  3. Monitoring volcanic thermal activity by Robust Satellite Techniques: achievements and perspectives

    Science.gov (United States)

    Tramutoli, V.; Marchese, F.; Mazzeo, G.; Pergola, N.

    2009-12-01

    Satellite data have been increasingly used in last decades to study active volcanoes and to monitor thermal activity variation in space-time domain. Several satellite techniques and original methods have been developed and tested, devoted to hotspot detection and thermal monitoring. Among them, a multi-temporal approach, named RST (Robust Satellite Techniques), has shown high performances in detecting hotspots, with a low false positive rate under different observational and atmospheric conditions, providing also a potential toward low-level thermal anomalies which may announce incoming eruptions. As the RST scheme is intrinsically exportable on different geographic areas and satellite sensors, it has been applied and tested on a number of volcanoes and in different environmental conditions. This work presents major results and outcomes of studies carried out on Etna and Stromboli (Italy), Merapi (Java Indonesia), Asamayama (Japan), Jebel Al Tair (Yemen) by using different satellite systems and sensors (e.g. NOAA-AVHRR, EOS-MODIS, MSG-SEVIRI). Performances on hotspot detection, early warning and real-time monitoring, together with capabilities in possible thermal precursor identification, will be presented and discussed.

  4. Neutron activation techniques in the detection and measurement of environmental pollutants

    International Nuclear Information System (INIS)

    Spyrou, N.M.; Maheswaran, P.; Nagy, K.; Oezek, F.

    1976-01-01

    The Medical and Environmental Group at the University of Surrey has been involved for several years in the development and application of nuclear activation techniques to biomedical and environmental problems. One such project has been a study of air pollution in the city of Guildford, which requires a routine but quick analytical process for the detection of trace elements in the atmosphere in order to handle data with limited resources and manpower. The proposed method comprises cyclic irradiation and counting, followed by further counting on a low-energy photon detector and a Ge(Li) detector. The scheme concentrates on the measurement of short-lived isotopes. In order to test its efficacy it is compared with conventional activation experiments for irradiation times of 1 min, 10 min and 60 min; various types of filter papers and membranes, used for collection of the samples, are analysed under these conditions. The paper illustrates this comparison by analysis of NBS Standard Reference Material 1571 (Orchard Leaves) on Whatman grade 1 filter paper. The analysis of a typical Guildford sample is also shown. The technique enhances the detection of 38 Clsup(m)(0.74 s), 207 Pbsup(m)(0.8 s), 20 F(11.56 s), 77 Sesup(m)(17.5 s) and 110 Ag(24.4 s). (author)

  5. Surface deformation of active volcanic areas retrieved with the SBAS-DInSAR technique: an overview

    Directory of Open Access Journals (Sweden)

    G. Zeni

    2008-06-01

    Full Text Available This paper presents a comprehensive overview of the surface deformation retrieval capability of the Differential Synthetic Aperture Radar Interferometry (DInSAR algorithm, referred to as Small BAseline Subset (SBAS technique, in the context of active volcanic areas. In particular, after a brief description of the algorithm some experiments relevant to three selected case-study areas are presented. First, we concentrate on the application of the SBAS algorithm to a single-orbit scenario, thus considering a set of SAR data composed by images acquired on descending orbits by the European Remote Sensing (ERS radar sensors and relevant to the Long Valley caldera (eastern California area. Subsequently, we address the capability of the SBAS technique in a multipleorbit context by referring to Mt. Etna volcano (southern Italy test site, with respect to which two different ERS data set, composed by images acquired both on ascending and descending orbits, are available. Finally, we take advantage of the capability of the algorithm to work in a multi-platform scenario by jointly exploiting two different sets of SAR images collected by the ERS and the Environment Satellite (ENVISAT radar sensors in the Campi Flegrei caldera (southern Italy area. The presented results demonstrate the effectiveness of the algorithm to investigate the deformation field in active volcanic areas and the potential of the DInSAR methodologies within routine surveillance scenario.

  6. Learning from the experts: exploring playground experience and activities using a write and draw technique.

    Science.gov (United States)

    Knowles, Zoe Rebecca; Parnell, Daniel; Stratton, Gareth; Ridgers, Nicola Diane

    2013-03-01

    Qualitative research into the effect of school recess on children's physical activity is currently limited. This study used a write and draw technique to explore children's perceptions of physical activity opportunities during recess. 299 children age 7-11 years from 3 primary schools were enlisted. Children were grouped into Years 3 & 4 and Years 5 & 6 and completed a write and draw task focusing on likes and dislikes. Pen profiles were used to analyze the data. Results indicated 'likes' focused on play, positive social interaction, and games across both age groups but showed an increasing dominance of games with an appreciation for being outdoors with age. 'Dislikes' focused on dysfunctional interactions linked with bullying, membership, equipment, and conflict for playground space. Football was a dominant feature across both age groups and 'likes/dislikes' that caused conflict and dominated the physically active games undertaken. Recess was important for the development of conflict management and social skills and contributed to physical activity engagement. The findings contradict suggestions that time spent in recess should be reduced because of behavioral issues.

  7. Brief review: Preparation techniques of biomass based activated carbon monolith electrode for supercapacitor applications

    Science.gov (United States)

    Taer, Erman; Taslim, Rika

    2018-02-01

    The synthesis of activated carbon monolith electrode made from a biomass material using the hydrolytic pressure or the pelletization technique of pre-carbonized materials is one of standard reported methods. Several steps such as pre-carbonization, milling, chemical activation, hydraulic press, carbonization, physical activation, polishing and washing need to be accomplished in the production of electrodes by this method. This is relatively a long process that need to be simplified. In this paper we present the standard method and proceed with the introduction to several alternative methods in the synthesis of activated carbon monolith electrodes. The alternative methods were emphasized on the selection of suitable biomass materials. All of carbon electrodes prepared by different methods will be analyzed for physical and electrochemical properties. The density, degree of crystallinity, surface morphology are examples for physical study and specific capacitance was an electrochemical properties that has been analysed. This alternative method has offered a specific capacitance in the range of 10 to 171 F/g.

  8. A highly sensitive technique for detecting catalytically active nanoparticles against a background of general workplace aerosols

    International Nuclear Information System (INIS)

    Neubauer, N; Weis, F; Seipenbusch, M; Kasper, G; Binder, A

    2011-01-01

    A new measurement technique was studied using catalysis to specifically detect airborne nanoparticles in presence of background particles in the workplace air. Catalytically active nanoparticles produced by spark discharge were used as aerosol catalysts. According to these particles suitable catalytic test reactions were chosen and investigated by two different approaches: catalysis on airborne nanoparticles and catalysis on deposited nanoparticles. The results indicate that catalysis is applicable for the specific measurement of nanoparticles in the workplace air. Catalysis on airborne particles is suitable for the specific detection of very active nanoparticles, e.g. platinum or nickel, at high concentrations of about 10 7 /cm 3 . The approach of catalysis on deposited particles is better suited for nanoparticle aerosols at low concentrations, for slow catalytic reactions or less active nanoparticles like iron oxide (Fe 2 O 3 ). On the basis of the experimental results detection limits in the range of μg or even ng were calculated which assure the good potential of catalysis for the specific detection of nanoparticles in the workplace air based on their catalytic activity.

  9. Biofilm removal by 6% sodium hypochlorite activated by different irrigation techniques.

    Science.gov (United States)

    Ordinola-Zapata, R; Bramante, C M; Aprecio, R M; Handysides, R; Jaramillo, D E

    2014-07-01

    To compare the removal of biofilm utilizing four irrigation techniques on a bovine root canal model. Fifty dentine specimens (2 × 2 mm) were infected with biofilm. The samples were then adapted to previously created cavities in the bovine model. The root canals were irrigated twice with 2 mL of 6% sodium hypochlorite for 2 min (4 min total). Following initial irrigation, the different treatment modalities were introduced for 60 s (3 × 20 s intervals). The evaluated techniques were needle irrigation, Endoactivator (Dentsply Tulsa Dental, Tulsa, OK, USA), passive ultrasonic irrigation and laser-activated irrigation (photon-induced photoacoustic streaming). The controls were irrigated with distilled water and conventional needle irrigation. Subsequently, the dentine samples were separated from the model and analysed using a scanning electron microscope (SEM). Fifteen operative fields were scanned per block, and SEM pictures were captured. Two calibrated evaluators examined the images and collected data using a four-degree scale. Nonparametric tests were used to evaluate for statistical significance amongst the groups. The group undergoing laser-activated irrigation using photon-induced photoacoustic streaming exhibited the most favourable results in the removal of biofilm. Passive ultrasonic irrigation scores were significantly lower than both the Endoactivator and needle irrigation scores. Sonic and needle irrigation were not significantly different. The least favourable results were found in the control group. Laser activation of 6% sodium hypochlorite significantly improved the cleaning of biofilm-infected dentine followed by passive ultrasonic irrigation. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  10. Antioxidant activity and phenolic compounds in organic red wine using different winemaking techniques.

    Science.gov (United States)

    Mulero, Juana; Zafrilla, Pilar; Cayuela, Jose M; Martínez-Cachá, Adela; Pardo, Francisco

    2011-04-01

    Wine phenolic composition depends on the grapes used to make wine and on vinification conditions. The occurrence of these biological compounds has stimulated numerous studies focused on understanding the mechanisms that influence their concentrations in wine. This article studied the effect of different vinification techniques on the antioxidant activity and on the phenolic compounds of red wine made from the variety of Monastrell grapes obtained by organic culture. To this purpose, 3 different vinification procedures were carried out: vinification after prolonged maceration, vinification with the addition of enological enzymes, and traditional vinification procedures (used as control).The results showed similar values of antioxidant activity in all 3 types of wine elaborated and found no differences in the concentrations of the different types of phenolic compounds in wine made with the 3 different methods. The evolution of antioxidant activity and phenolic compounds tested in wines during 3 mo of storage showed a similar pattern. Organic wine has acquired an important role in the economic world and its important, working in oenology to research in this field.

  11. Investigation of anti-wear performance of automobile lubricants using thin layer activation analysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Biswal, Jayashree [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Thakre, G.D. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Pant, H.J., E-mail: hjpant@barc.gov.in [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Samantray, J.S. [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Arya, P.K. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Sharma, S.C.; Gupta, A.K. [Nuclear Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2017-05-15

    An investigation was carried out to examine the anti-wear behavior of automobile lubricants using thin layer activation analysis technique. For this study disc gears made of EN 31 steel were labeled with a small amount of radioactivity by irradiating with 13 MeV proton beam from a particle accelerator. Experiments on wear rate measurement of the gear were carried out by mounting the irradiated disc gear on a twin-disc tribometer under lubricated condition. The activity loss was monitored by using a NaI(Tl) scintillation detector integrated with a multichannel analyzer. The relative remnant activity was correlated with thickness loss by generating a calibration curve. The wear measurements were carried out for four different types of lubricants, named as, L1, L2, L3 and L4. At lower load L1 and L4 were found to exhibit better anti-wear properties than L2 and L3, whereas, L4 exhibited the best anti-wear performance behavior than other three lubricants at all the loads and speeds investigated.

  12. Antibiofilm properties of interfacially active lipase immobilized porous polycaprolactam prepared by LB technique.

    Directory of Open Access Journals (Sweden)

    Veluchamy Prabhawathi

    Full Text Available Porous biomaterial is the preferred implant due to the interconnectivity of the pores. Chances of infection due to biofilm are also high in these biomaterials because of the presence of pores. Although biofilm in implants contributes to 80% of human infections, there are no commercially available natural therapeutics against it. In the current study, glutaraldehyde cross linked lipase was transferred onto a activated porous polycaprolactam surface using Langmuir-Blodgett deposition technique, and its thermostability, slimicidal, antibacterial, biocompatibility and surface properties were studied. There was a 20% increase in the activity of the covalently crosslinked lipase when compared to its free form. This immobilized surface was thermostable and retained activity and stability until 100°C. There was a 2 and 7 times reduction in carbohydrate and 9 and 5 times reduction in biofilm protein of Staphylococcus aureus and Escherichia coli respectively on lipase immobilized polycaprolactam (LIP when compared to uncoated polycaprolactam (UP. The number of live bacterial colonies on LIP was four times less than on UP. Lipase acted on the cell wall of the bacteria leading to its death, which was confirmed from AFM, fluorescence microscopic images and amount of lactate dehydrogenase released. LIP allowed proliferation of more than 90% of 3T3 cells indicating that it was biocompatible. The fact that LIP exhibits antimicrobial property at the air-water interface to hydrophobic as well as hydrophilic bacteria along with lack of cytotoxicity makes it an ideal biomaterial for biofilm prevention in implants.

  13. Characterizing Dissolved Organic Matter and Metabolites in an Actively Serpentinizing Ophiolite Using Global Metabolomics Techniques

    Science.gov (United States)

    Seyler, L. M.; Rempfert, K. R.; Kraus, E. A.; Spear, J. R.; Templeton, A. S.; Schrenk, M. O.

    2017-12-01

    Environmental metabolomics is an emerging approach used to study ecosystem properties. Through bioinformatic comparisons to metagenomic data sets, metabolomics can be used to study microbial adaptations and responses to varying environmental conditions. Since the techniques are highly parallel to organic geochemistry approaches, metabolomics can also provide insight into biogeochemical processes. These analyses are a reflection of metabolic potential and intersection with other organisms and environmental components. Here, we used an untargeted metabolomics approach to characterize dissolved organic carbon and aqueous metabolites from groundwater obtained from an actively serpentinizing habitat. Serpentinites are known to support microbial communities that feed off of the products of serpentinization (such as methane and H2 gas), while adapted to harsh environmental conditions such as high pH and low DIC availability. However, the biochemistry of microbial populations that inhabit these environments are understudied and are complicated by overlapping biotic and abiotic processes. The aim of this study was to identify potential sources of carbon in an environment that is depleted of soluble inorganic carbon, and to characterize the flow of metabolites and describe overlapping biogenic and abiogenic processes impacting carbon cycling in serpentinizing rocks. We applied untargeted metabolomics techniques to groundwater taken from a series of wells drilled into the Semail Ophiolite in Oman.. Samples were analyzed via quadrupole time-of-flight liquid chromatography tandem mass spectrometry (QToF-LC/MS/MS). Metabolomes and metagenomic data were imported into Progenesis QI software for statistical analysis and correlation, and metabolic networks constructed using the Genome-Linked Application for Metabolic Maps (GLAMM), a web interface tool. Further multivariate statistical analyses and quality control was performed using EZinfo. Pools of dissolved organic carbon could

  14. Getting the Most Out of Dual-Listed Courses: Involving Undergraduate Students in Discussion through Active Learning Techniques

    Science.gov (United States)

    Duncan, Leslie Lyons; Burkhardt, Bethany L.; Benneyworth, Laura M.; Tasich, Christopher M.; Duncan, Benjamin R.

    2015-01-01

    This article provides readers with details concerning the implementation of four active learning techniques used to help undergraduate students critically discuss primary literature. On the basis of undergraduate and graduate student perceptions and experiences, the authors suggest techniques to enhance the quality of dual-listed courses and…

  15. The radiological safety in the use of nuclear technique -activities developed by Centro de Desenvolvimento da Tecnologia Nuclear - CNEN

    International Nuclear Information System (INIS)

    Wakabayashi, T.; Pereira, E.G.; Hirayama, T.

    1991-01-01

    The activities developed by the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN supporting the users of nuclear techniques are described. The methodology used and future plans for the group are shown. (E.G.)

  16. Techniques for extracting single-trial activity patterns from large-scale neural recordings

    Science.gov (United States)

    Churchland, Mark M; Yu, Byron M; Sahani, Maneesh; Shenoy, Krishna V

    2008-01-01

    Summary Large, chronically-implanted arrays of microelectrodes are an increasingly common tool for recording from primate cortex, and can provide extracellular recordings from many (order of 100) neurons. While the desire for cortically-based motor prostheses has helped drive their development, such arrays also offer great potential to advance basic neuroscience research. Here we discuss the utility of array recording for the study of neural dynamics. Neural activity often has dynamics beyond that driven directly by the stimulus. While governed by those dynamics, neural responses may nevertheless unfold differently for nominally identical trials, rendering many traditional analysis methods ineffective. We review recent studies – some employing simultaneous recording, some not – indicating that such variability is indeed present both during movement generation, and during the preceding premotor computations. In such cases, large-scale simultaneous recordings have the potential to provide an unprecedented view of neural dynamics at the level of single trials. However, this enterprise will depend not only on techniques for simultaneous recording, but also on the use and further development of analysis techniques that can appropriately reduce the dimensionality of the data, and allow visualization of single-trial neural behavior. PMID:18093826

  17. On the Active and Passive Flow Separation Control Techniques over Airfoils

    Science.gov (United States)

    Moghaddam, Tohid; Banazadeh Neishabouri, Nafiseh

    2017-10-01

    In the present work, recent advances in the field of the active and passive flow separation control, particularly blowing and suction flow control techniques, applied on the common airfoils are briefly reviewed. This broad research area has remained the point of interest for many years as it is applicable to various applications. The suction and blowing flow control methods, among other methods, are more technically feasible and market ready techniques. It is well established that the uniform and/or oscillatory blowing and suction flow control mechanisms significantly improve the lift-to-drag ratio, and further, postpone the boundary layer separation as well as the stall. The oscillatory blowing and suction flow control, however, is more efficient compared to the uniform one. A wide range of parameters is involved in controlling the behavior of a blowing and/or suction flow control, including the location, length, and angle of the jet slots. The oscillation range of the jet slot is another substantial parameter.

  18. Evaluation of the natural radioactivity using thermoluminescence, gamma spectrometry and neutron activation techniques

    International Nuclear Information System (INIS)

    Fausto, A.M.; Otsubo, S.M.; Paes, W.S.; Yoshimura, E.M.; Okuno, E.; Hiodo, F.; Marques, L.S.; Alcala, A.L.

    1996-01-01

    The evaluation of the radiation dose in the living species due to the natural radioactivity is the main objective of this paper. The region that had been monitored was Intrusive Suite of Itu near to Sao Paulo city. Lateral[and depth distributions of natural radioactivity of the soil were determined using the techniques of thermoluminescence gamma spectrometry and neutron[activation. From the concentration in the soil of K-40 and radioactive elements of U and Th series experimentally determined, the dose due to gamma rays in air at 1 m from the soil was evaluated and the results compared with the direct dose measured with the portable rate-meter. (authors). 11 refs., 3 figs

  19. Control and switching synchronization of fractional order chaotic systems using active control technique

    KAUST Repository

    Radwan, A.G.

    2013-03-13

    This paper discusses the continuous effect of the fractional order parameter of the Lü system where the system response starts stable, passing by chaotic behavior then reaching periodic response as the fractional-order increases. In addition, this paper presents the concept of synchronization of different fractional order chaotic systems using active control technique. Four different synchronization cases are introduced based on the switching parameters. Also, the static and dynamic synchronizations can be obtained when the switching parameters are functions of time. The nonstandard finite difference method is used for the numerical solution of the fractional order master and slave systems. Many numeric simulations are presented to validate the concept for different fractional order parameters.

  20. Microwave amplifier and active circuit design using the real frequency technique

    CERN Document Server

    Jarry, Pierre

    2016-01-01

    This book focuses on the authors' Real Frequency Technique (RFT) and its application to a wide variety of multi-stage microwave amplifiers and active filters, and passive equalizers for radar pulse shaping and antenna return loss applications. The first two chapters review the fundamentals of microwave amplifier design and provide a description of the RFT. Each subsequent chapter introduces a new type of amplifier or circuit design, reviews its design problems, and explains how the RFT can be adapted to solve these problems. The authors take a practical approach by summarizing the design steps and giving numerous examples of amplifier realizations and measured responses. Provides a complete description of the RFT as it is first used to design multistage lumped amplifiers using a progressive optimization of the equalizers, leading to a small umber of parameters to optimize simultaneously Presents modifications to the RFT to design trans-impedance microwave amplifiers that are used for photodiodes acti...

  1. In vivo and in vitro techniques to determine the biological activity of food allergens

    DEFF Research Database (Denmark)

    Poulsen, Lars K.

    2001-01-01

    Methods for determination of the biological activity of food allergens comprise both determination of the allergenic potency, i.e. the capability to elicit an allergic reaction in an already sensitized individual, and the allergenic potential, i.e. the risk for sensitizing a hitherto non......-allergic individual. Several methods are discussed for determination of potency including the double-blinded placebo-controlled food challenge, skin testing, in vitro effector cell assays such as basophil histamine release, and IgE-based techniques such as RAST and RAST inhibition. No reliable methods have yet been...... developed which can predict the allergenic potential of a food or a food allergen. The progress in the areas of stability studies and animal models for food allergy are discussed....

  2. Active room compensation for sound reinforcement using sound field separation techniques

    DEFF Research Database (Denmark)

    Heuchel, Franz Maria; Fernandez Grande, Efren; Agerkvist, Finn T.

    2018-01-01

    with the three sound separation techniques. Resonances in the entire room are reduced, although the microphone array and secondary sources are confined to a small region close to the reflecting wall. Unlike previous control methods based on the creation of a plane wave sound field, the investigated method works......This work investigates how the sound field created by a sound reinforcement system can be controlled at low frequencies. An indoor control method is proposed which actively absorbs the sound incident on a reflecting boundary using an array of secondary sources. The sound field is separated...... into incident and reflected components by a microphone array close to the secondary sources, enabling the minimization of reflected components by means of optimal signals for the secondary sources. The method is purely feed-forward and assumes constant room conditions. Three different sound field separation...

  3. Neutron activation analysis - an old technique but is it still useful?

    International Nuclear Information System (INIS)

    McOrist, G.D.

    1998-01-01

    Neutron activation analysis (NAA) is a non-destructive technique of analysis making it particularly suitable to analyse certain types of samples or particular elements, such as diamonds, black precious opal and ancient fish fossil bones. It is particularly suited to analysing solid samples since no sample dissolution, with its associated problems, prior to analysis is necessary. NAA is remarkably free of matrix effects essentially eliminating complex pre analysis procedures. It is uniquely suited to determining low levels of certain elements such as Cl, Br and I, particularly in organic samples. Its ability to determine sub-ppm levels of Cl in transformer oils has greatly assisted in the development of a patented method for the destruction of PCB ' s. It is possible to analyse large samples in order to overcome homogeneity problems, which is particularly useful in the precious metals industry. Radiochemical NAA enables the determination of very low levels of particular elements (eg Ta) in samples traditionally difficult to dissolve (author)

  4. The Study of Mining Activities and their Influences in the Almaden Region Applying Remote Sensing Techniques

    International Nuclear Information System (INIS)

    Rico, C.; Schmid, T.; Millan, R.; Gumuzzio, J.

    2010-01-01

    This scientific-technical report is a part of an ongoing research work carried out by Celia Rico Fraile in order to obtain the Diploma of Advanced Studies as part of her PhD studies. This work has been developed in collaboration with the Faculty of Science at The Universidad Autonoma de Madrid and the Department of Environment at CIEMAT. The main objective of this work was the characterization and classification of land use in Almaden (Ciudad Real) during cinnabar mineral exploitation and after mining activities ceased in 2002, developing a methodology focused on the integration of remote sensing techniques applying multispectral and hyper spectral satellite data. By means of preprocessing and processing of data from the satellite images as well as data obtained from field campaigns, a spectral library was compiled in order to obtain representative land surfaces within the study area. Monitoring results show that the distribution of areas affected by mining activities is rapidly diminishing in recent years. (Author) 130 refs

  5. Hydrogeological activity of lineaments in Yaoundé Cameroon region using remote sensing and GIS techniques

    Directory of Open Access Journals (Sweden)

    William Teikeu Assatse

    2016-06-01

    Full Text Available Though Yaoundé zone is characterized by abundant rains, access to safe drinking water becomes a difficult activity, because of climate change and pollution caused by human activities. Lineament zones on the earth’s surface are important elements in understanding the dynamics of the subsurface fluid flow. However, good exposures of these features are always lacking in some areas around Yaoundé, characterized by thick alteration. During field surveys these conditions, in many cases, hinder the proper characterization of such features. Therefore, an approach that identifies the regional lineaments on remote-sensing images (Landsat Thematic Mapper and shaded digital terrain models, with its large scale synoptic coverage, could be promising. This paper aims to the structural organization of lineament network in the crystalline basement of Yaoundé from remote sensing data and characterize them by statistical and geostatistical techniques. The results were validated on the basis of the geological maps, the hydrogeological maps and the outcrop data. Statistical analysis of the lineaments network shows a distribution along the N0–10, N20–30, N40–60 and N140–150. The correlation between the productivity of high yield wells and the closest lineament confirms that these lineaments are surface traces of regional discontinuities and act as main groundwater flow paths.

  6. Evaluation of computer-based NDE techniques and regional support of inspection activities

    International Nuclear Information System (INIS)

    Taylor, T.T.; Kurtz, R.J.; Heasler, P.G.; Doctor, S.R.

    1991-01-01

    This paper describes the technical progress during fiscal year 1990 for the program entitled 'Evaluation of Computer-Based nondestructive evaluation (NDE) Techniques and Regional Support of Inspection Activities.' Highlights of the technical progress include: development of a seminar to provide basic knowledge required to review and evaluate computer-based systems; review of a typical computer-based field procedure to determine compliance with applicable codes, ambiguities in procedure guidance, and overall effectiveness and utility; design and fabrication of a series of three test blocks for NRC staff use for training or audit of UT systems; technical assistance in reviewing (1) San Onofre ten year reactor pressure vessel inservice inspection activities and (2) the capability of a proposed phased array inspection of the feedwater nozzle at Oyster Creek; completion of design calculations to determine the feasibility and significance of various sizes of mockup assemblies that could be used to evaluate the effectiveness of eddy current examinations performed on steam generators; and discussion of initial mockup design features and methods for fabricating flaws in steam generator tubes

  7. Student knowledge and confidence in an elective clinical toxicology course using active-learning techniques.

    Science.gov (United States)

    Thomas, Michael C; Macias-Moriarity, Liliairica Z

    2014-06-17

    To measure changes in students' knowledge and confidence scores after completing an elective clinical toxicology course in an accelerated doctor of pharmacy (PharmD) program. Various active-learning techniques were used to create a learner-centered environment. Approximately two-thirds of the course used student-led presentations. Some of those not presenting were assigned to be evaluators, responsible for asking the presenter a question or writing quiz questions based on the presented material. Other learner-centered activities included weekly quizzes and discussions at the conclusion of each presented topic. A test instrument designed to measure students' knowledge and associated level of confidence on each item was administered at the beginning and end of the course. Students' knowledge and confidence scores increased significantly from pretest to posttest. Students' increased confidence and knowledge scores were well correlated after course completion, indicating students were better able to self-assess these areas. These findings suggest that confidence could be an additional measure of students' metacognitive skill development.

  8. Oxidant and antioxidant activities of different anesthetic techniques. Propofol versus desflurane

    International Nuclear Information System (INIS)

    Ceylan, Berit G.; Yilmaz, Funda; Eroglu, Fusun; Yavuz, Lutfi; Gulmen, Senol; Vural, Huseyin

    2009-01-01

    To investigate the correlation between propofol and desflurane in terms of lipid peroxidation and antioxidant activity and to search the possible antioxidant anesthesia technique. The study was performed in the Department of Anesthesia and Reanimation, Medical Faculty, Suleyman Demirel University, Isparta, Turkey, between January 2006 and July 2006. Thirty, ASA I-II patients, with an age range of 19-55 years, undergoing elective surgery under general anesthesia were randomized to receive either propofol infusion (Group P) or desflurane inhalation (Group D) following standard induction. Malondialdehyde (MDA), glutathione peroxidase (GSH), super oxide dismutase (SOD) and alpha-tocopherol (Vitamin E) were measured preoperatively, at peroperatively first hour and postoperatively 12-hour. Malondialdehyde was found lower peroperatively in Group P compared to Group D (p<0.05). In Group D, Vitamin E levels were decreased significantly peroperatively compared to preoperative period (p=0.001). We observed a systemic oxidative stress increment with desflurane by terms of MDA; a lipid peroxidation product and endogenous antioxidant activity suppression by terms of Vitamin E at only peroperative period. This study may be defined to support the fact that free oxygen radicals were released more by desflurane than propofol. (author)

  9. Making sense of geoscientific concepts using active pedagogy techniques, a technology aided experience

    Science.gov (United States)

    Huguet, C.; Noè, L. F.; Pearse, J.; Gómez Pérez, M.; Valencia Lopez, D.; Jimenez Heredia, A.; Patiño Avedaño, M.

    2016-12-01

    This work is the result of a teaching innovation project funded by the Conecta-TE unit at Universidad de los Andes, Bogotá, Colombia and results from the collaborative work of a team of geoscience professors and pedagogic and technical support experts. The need for this innovation stems from the constraints of teaching an applied science subject to a large cohort of approximately 500 students per semester in five sections which makes it impossible to include laboratories or scientific outings. These factors are compounded by the fact this is an introductory core course for Geoscience but also a service course that can be taken by any student on campus whether they have a scientific background or not. Therefore our aim was double: making the basic concepts more understandable for a broad audience, while at the same time maintaining a sufficiently high level to challenge and form a sound basis for students from the Geosciences program. Additionally we wanted to incorporate more active and practical aspects to the subject in order to enhance student learning. This in itself was challenging with groups of over 90 students. Data on student understanding and satisfaction were collected both in classes where the innovation was implemented and others in which it was not. Generally our innovation was positively rated, however the students perceived that it involved more work than the traditional lecture-based classes, but they preferred the continual assessment to traditional homework. The methodology was improved and implemented fully for the second round of teaching by introducing the methodology and objectives more clearly. In the future we expect to reduce the number of activities per class (the ´less-is-more' approach) whilst at the same time increasing the amount of classes which include active learning techniques. The ultimate goal is to extend the experience from the two current sections to all five sections of the course.

  10. Active Interrogation using Photofission Technique for Nuclear Materials Control and Accountability

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Haori [Oregon State Univ., Corvallis, OR (United States)

    2016-03-31

    Innovative systems with increased sensitivity and resolution are in great demand to detect diversion and to prevent misuse in support of nuclear materials management for the U.S. fuel cycle. Nuclear fission is the most important multiplicative process involved in non-destructive active interrogation. This process produces the most easily recognizable signature for nuclear materials. In addition to thermal or high-energy neutrons, high-energy gamma rays can also excite a nucleus and cause fission through a process known as photofission. Electron linear accelerators (linacs) are widely used as the interrogating photon sources for inspection methods involving photofission technique. After photofission reactions, prompt signals are much stronger than the delayed signals, but it is difficult to quantify them in practical measurements. Delayed signals are easily distinguishable from the interrogating radiation. Linac-based, advanced inspection techniques utilizing the delayed signals after photofission have been extensively studied for homeland security applications. Previous research also showed that a unique delayed gamma ray energy spectrum exists for each fissionable isotope. In this work, high-energy delayed γ-rays were demonstrated to be signatures for detection, identification, and quantification of special nuclear materials. Such γ-rays were measured in between linac pulses using independent data acquisition systems. A list-mode system was developed to measure low-energy delayed γ-rays after irradiation. Photofission product yields of 238U and 239Pu were determined based on the measured delayed γ-ray spectra. The differential yields of delayed γ-rays were also proven to be able to discriminate nuclear from non-nuclear materials. The measurement outcomes were compared with Monte Carlo simulation results. It was demonstrated that the current available codes have capabilities and limitations in the simulation of photofission process. A two

  11. A COMPARISON BETWEEN ACTIVE AND PASSIVE TECHNIQUES FOR UNDERWATER 3D APPLICATIONS

    Directory of Open Access Journals (Sweden)

    G. Bianco

    2012-09-01

    Full Text Available In the field of 3D scanning, there is an increasing need for more accurate technologies to acquire 3D models of close range objects. Underwater exploration, for example, is very hard to perform due to the hostile conditions and the bad visibility of the environment. Some application fields, like underwater archaeology, require to recover tridimensional data of objects that cannot be moved from their site or touched in order to avoid possible damages. Photogrammetry is widely used for underwater 3D acquisition, because it requires just one or two digital still or video cameras to acquire a sequence of images taken from different viewpoints. Stereo systems composed by a pair of cameras are often employed on underwater robots (i.e. ROVs, Remotely Operated Vehicles and used by scuba divers, in order to survey archaeological sites, reconstruct complex 3D structures in aquatic environment, estimate in situ the length of marine organisms, etc. The stereo 3D reconstruction is based on the triangulation of corresponding points on the two views. This requires to find in both images common points and to match them (correspondence problem, determining a plane that contains the 3D point on the object. Another 3D technique, frequently used in air acquisition, solves this point-matching problem by projecting structured lighting patterns to codify the acquired scene. The corresponding points are identified associating a binary code in both images. In this work we have tested and compared two whole-field 3D imaging techniques (active and passive based on stereo vision, in underwater environment. A 3D system has been designed, composed by a digital projector and two still cameras mounted in waterproof housing, so that it can perform the various acquisitions without changing the configuration of optical devices. The tests were conducted in a water tank in different turbidity conditions, on objects with different surface properties. In order to simulate a typical

  12. Active Interrogation using Photofission Technique for Nuclear Materials Control and Accountability

    International Nuclear Information System (INIS)

    Yang, Haori

    2016-01-01

    Innovative systems with increased sensitivity and resolution are in great demand to detect diversion and to prevent misuse in support of nuclear materials management for the U.S. fuel cycle. Nuclear fission is the most important multiplicative process involved in non-destructive active interrogation. This process produces the most easily recognizable signature for nuclear materials. In addition to thermal or high-energy neutrons, high-energy gamma rays can also excite a nucleus and cause fission through a process known as photofission. Electron linear accelerators (linacs) are widely used as the interrogating photon sources for inspection methods involving photofission technique. After photofission reactions, prompt signals are much stronger than the delayed signals, but it is difficult to quantify them in practical measurements. Delayed signals are easily distinguishable from the interrogating radiation. Linac-based, advanced inspection techniques utilizing the delayed signals after photofission have been extensively studied for homeland security applications. Previous research also showed that a unique delayed gamma ray energy spectrum exists for each fissionable isotope. In this work, high-energy delayed γ-rays were demonstrated to be signatures for detection, identification, and quantification of special nuclear materials. Such γ-rays were measured in between linac pulses using independent data acquisition systems. A list-mode system was developed to measure low-energy delayed γ-rays after irradiation. Photofission product yields of 238 U and 239 Pu were determined based on the measured delayed γ-ray spectra. The differential yields of delayed γ-rays were also proven to be able to discriminate nuclear from non-nuclear materials. The measurement outcomes were compared with Monte Carlo simulation results. It was demonstrated that the current available codes have capabilities and limitations in the simulation of photofission process. A two-fold approach was

  13. Comparative screening of the anti-oxidant and antimicrobial activities of Sempervivum marmoreum L. extracts obtained by various extraction techniques

    Directory of Open Access Journals (Sweden)

    SASA S. STOJICEVIC

    2008-06-01

    Full Text Available This paper presents a comparative study of the anti-oxidant and anti-microbial activities, total phenolic compounds and total flavonoids in extracts obtained from houseleek (Sempervivum marmoreum L. leaves by the classical (maceration, ultrasonic and Soxhlet extraction (CE, UE and SE, respectively. The extract obtained by the CE contained higher amounts of phenolic and flavonoid compounds and showed a better antioxidant activity than those obtained using other two techniques. All the extracts, independent of the extraction technique applied, showed antimicrobial activities against Aspergillus niger and Candida albicans only but not against the tested bacteria.

  14. Technique and equipment for measuring volume activity of radon in the air of radon laboratories and clinics

    International Nuclear Information System (INIS)

    Vorob'ev, I.B.; Krivokhatskij, A.S.; Nekrasov, E.V.; Nikolaev, V.A.; Potapov, V.G.; Terent'ev, M.V.

    1990-01-01

    Usability of a new equipment-technique combination for measuring radon activity in the air of radon laboratories and balneological clinics is studied. The complex includes nitrate-cellulose detector, radon chamber, Aist, Istra type spark counters and technique of spark counting. The method sensitivity is 50 Bqxm 3 , the error is 30%. Usability and advisability of track method in radon laboratories and balneological clinics for simultaneous measurement in several points of integral volumetric radon activities are confirmred. The method permits to carry out rapid and accurate bulk investigations. The results of determining mean volumetric radon activity in the air in different points of radon laboratory and radon clinics are presented

  15. Energy landscape and diffusion kinetics of lithiated silicon: A kinetic activation-relaxation technique study

    Science.gov (United States)

    Trochet, Mickaël; Mousseau, Normand

    2017-10-01

    With large specific and volumetric capacity, lithiated silicon is an excellent anode for lithium-ion batteries. Its application is challenged today, however, by the formation of an amorphous a -LixSi phase associated with a large volume change that occurs at relatively low Li concentration and remains only very partly understood at the microscopic level. In this paper, we characterize the full energy landscape associated with the onset of Li insertion in crystalline Si as a first step for understanding the lithiation process. We identify the diffusion mechanisms and migration energies for one to ten Li atoms in a Si crystal as well as the average lifetime of small lithium aggregates, using the kinetic activation-relaxation technique (kART), an off-lattice kinetic Monte-Carlo method with on-the-fly catalog building capabilities coupled to a newly developed force field (ReaxFF) used as potential based on ab initio results. We show that the short lifetimes of the bound states (from meV to ten meV) mean that Li atoms move in the interstitial sublattice with little interactions, explaining how high Li concentration in Si can be reached.

  16. Techniques for sampling nuclear waste tank contents and in situ measurement of activity

    International Nuclear Information System (INIS)

    Lawrence, R.C.

    1978-04-01

    A study was conducted to develop suitable sampling equipment and techniques for characterizing the mechanical properties of nuclear wastes; identifying effective means of measuring radiation levels, temperatures, and neutron fluxes in situ in wastes; and developing a waste core sampler. A portable, stainless steel probe was developed which is placed in the tank through a riser. This probe is built for the insertion of instrumentation that can measure the contents of the tank at any level and take temperature, radiation, and neutron activation readings with reliable accuracy. A simple and reliable instrument for the in situ extraction of waste materials ranging from liquid to concrete-like substances was also developed. This portable, stainless steel waste core sampler can remove up to one liter of radioactive waste from tanks for transportation to hot cell laboratories for analysis of hardness, chemical form, and isotopic content. A cask for transporting the waste samples from the tanks to the laboratory under radiation-protected conditions was also fabricated. This cask was designed with a ''boot'' or inner-seal liner to contain any radioactive wastes that might remain on the outside of the waste core sampling device

  17. Behaviour based Mobile Robot Navigation Technique using AI System: Experimental Investigation on Active Media Pioneer Robot

    Directory of Open Access Journals (Sweden)

    S. Parasuraman, V.Ganapathy

    2012-10-01

    Full Text Available A key issue in the research of an autonomous robot is the design and development of the navigation technique that enables the robot to navigate in a real world environment. In this research, the issues investigated and methodologies established include (a Designing of the individual behavior and behavior rule selection using Alpha level fuzzy logic system  (b Designing of the controller, which maps the sensors input to the motor output through model based Fuzzy Logic Inference System and (c Formulation of the decision-making process by using Alpha-level fuzzy logic system. The proposed method is applied to Active Media Pioneer Robot and the results are discussed and compared with most accepted methods. This approach provides a formal methodology for representing and implementing the human expert heuristic knowledge and perception-based action in mobile robot navigation. In this approach, the operational strategies of the human expert driver are transferred via fuzzy logic to the robot navigation in the form of a set of simple conditional statements composed of linguistic variables.Keywards: Mobile robot, behavior based control, fuzzy logic, alpha level fuzzy logic, obstacle avoidance behavior and goal seek behavior

  18. Experimental Studies of Active and Passive Flow Control Techniques Applied in a Twin Air-Intake

    Directory of Open Access Journals (Sweden)

    Akshoy Ranjan Paul

    2013-01-01

    Full Text Available The flow control in twin air-intakes is necessary to improve the performance characteristics, since the flow traveling through curved and diffused paths becomes complex, especially after merging. The paper presents a comparison between two well-known techniques of flow control: active and passive. It presents an effective design of a vortex generator jet (VGJ and a vane-type passive vortex generator (VG and uses them in twin air-intake duct in different combinations to establish their effectiveness in improving the performance characteristics. The VGJ is designed to insert flow from side wall at pitch angle of 90 degrees and 45 degrees. Corotating (parallel and counterrotating (V-shape are the configuration of vane type VG. It is observed that VGJ has the potential to change the flow pattern drastically as compared to vane-type VG. While the VGJ is directed perpendicular to the side walls of the air-intake at a pitch angle of 90 degree, static pressure recovery is increased by 7.8% and total pressure loss is reduced by 40.7%, which is the best among all other cases tested for VGJ. For bigger-sized VG attached to the side walls of the air-intake, static pressure recovery is increased by 5.3%, but total pressure loss is reduced by only 4.5% as compared to all other cases of VG.

  19. Synthetic pheromones as a management technique - dispensers reduce Linepithema humile activity in a commercial vineyard.

    Science.gov (United States)

    Westermann, Fabian L; Bell, Vaughn A; Suckling, David M; Lester, Philip J

    2016-04-01

    Invasive ants, such as the Argentine ant, have often been reported to facilitate honeydew-producing hemipteran pests such as mealybugs, which can be vectors of plant pathogens. Synthetic pheromones may offer a target-specific method to control such ants and consequently lower the abundance of honeydew-producing pests. Here we report the results of a trial to suppress Argentine ants in grapevines using ant pheromone dispensers. Compared with untreated controls, we observed a significant drop in Argentine ant activity on the ground, irrespective of whether pheromone dispensers were placed at ground level, within the canopy or in both locations. Ant counts in the canopy confirmed that Argentine ant abundance was reduced under the influence of the pheromone dispenser placed at ground level compared with untreated controls. However, placing dispensers only in the canopy did not reduce the numbers of ants within the canopy compared with untreated controls. Our results showed that pheromone dispensers can significantly reduce Argentine ant foraging in grapevines if they are positioned appropriately. This technique could potentially reduce the abundance of associated mealybugs and potentially attendant virus vectoring areawide. © 2015 Society of Chemical Industry.

  20. Development of an Active Flow Control Technique for an Airplane High-Lift Configuration

    Science.gov (United States)

    Shmilovich, Arvin; Yadlin, Yoram; Dickey, Eric D.; Hartwich, Peter M.; Khodadoust, Abdi

    2017-01-01

    This study focuses on Active Flow Control methods used in conjunction with airplane high-lift systems. The project is motivated by the simplified high-lift system, which offers enhanced airplane performance compared to conventional high-lift systems. Computational simulations are used to guide the implementation of preferred flow control methods, which require a fluidic supply. It is first demonstrated that flow control applied to a high-lift configuration that consists of simple hinge flaps is capable of attaining the performance of the conventional high-lift counterpart. A set of flow control techniques has been subsequently considered to identify promising candidates, where the central requirement is that the mass flow for actuation has to be within available resources onboard. The flow control methods are based on constant blowing, fluidic oscillators, and traverse actuation. The simulations indicate that the traverse actuation offers a substantial reduction in required mass flow, and it is especially effective when the frequency of actuation is consistent with the characteristic time scale of the flow.

  1. Detailed characterization of lithium diffusion mechanisms in crystalline silicon using the kinetic Activation-Relaxation Technique

    Science.gov (United States)

    Trochet, Mickaël; Restrepo Gutierrez, Oscar Antonio; Mousseau, Normand

    Silicon displays a potential for high-capacity anode material for lithium-ion batteries as it can absorb large quantities of this metal. Yet, very little is understood about the evolution of diffusion mechanisms and migration barriers as the concentration of lithium increases. Until now, for example, simulations studies were limited by the time scale over which diffusion takes place. Here, we use the kinetic activation relaxation technique (kART), an unbiased off-lattice Monte Carlo method with on-the fly catalog building, coupled with the ReaxFF forcefield to follow diffusion of Li in c - Si over timescale of seconds and more at room temperature, obtaining detailed information about the whole set of possible diffusion mechanisms as the local environment evolves. We first present a detailed characterization of Li diffusion in the presence of 1 to 3 impurities and then show the evolution of systems with a higher concentration of solute as Li aggregate. These results provide a first detailed picture of the onset of Li aggregating into this high-capacity material, as it modifies the structure through local rearrangements and long-range elastic deformations, crucial information for the development of the next generation of high-capacity anode. ∖pard ∖pard.

  2. Techniques for tritium recovery from carbon flakes and dust at the JET active gas handling system

    International Nuclear Information System (INIS)

    Gruenhagen, S.; Perevezentsev, A.; Brennan, P. D.; Camp, P.; Knipe, S.; Miller, A.; Yorkshades, J.

    2008-01-01

    Detritiation of highly tritium contaminated carbon and metal material used as first wall armour is a key issue for fusion machines like JET and ITER. Re-deposited carbon and hydrogen in the form of flakes and dust can lead to a build-up of the tritium inventory and therefore this material must be removed and processed. The high tritium concentration of the flake and dust material collected from the JET vacuum vessel makes it unsuitable for direct waste disposal without detritiation. A dedicated facility to process the tritiated carbon flake material and recover the tritium has been designed and built. In several test runs active material was successfully processed and de-tritiated in the new facility. Samples containing only carbon and hydrogen isotopes have been completely oxidized without any residue. Samples containing metallic impurities, e.g. beryllium, require longer processing times, adjusted processing parameters and yield an oxide residue. The detritiation factor was 2x10 4 . In order to simulate in-vessel and ex-vessel detritiation techniques, the detritiation of a carbon flake sample by isotopic exchange in a hydrogen atmosphere was investigated. 2.8% of tritium was recovered by this means. (authors)

  3. TPR Technique in the study of activated surfaces; Tecnica TPR nello studio di superfici attivate

    Energy Technology Data Exchange (ETDEWEB)

    Lucarelli, L. [Linea Microstrutture Ce Instruments/ThermoQuest, Thermoquest Italia, Rodano, MI (Italy)

    2000-08-01

    Flow analytical techniques like the pulse chemisorption, TPR, TPO and TPD are easily applicable and supply several information about the energetic nature of catalysts. Though measurements are easily made, it is necessary to pay attention to preparation methods and to sample activation. TPR is a useful analytical tool to determine optima conditions of pre-treatment. Furthermore, reliability and reproducibility of experimental results are strongly linked to sensitivity and accuracy of instrumentation in use. Evaluation of these parameters is not always immediate. A TPR method is suggested for quantitative computation of instrumental sensitivity. [Italian] Le tecniche analitiche in flusso come il chemisorbimento a pulsi, TPR, TPO e TPD sono di semplice applicabilita' e forniscono parecchie informazioni sulla natura energetica dei catalizzatori. Nonostante la semplicita' delle misure, bisogna porre una particolare attenzione ai metodi preparativi e di attivazione del campione. La TPR e' un utile strumento analitico per l'individuazione delle condizioni ottimali di pre-trattamento. Inoltre, l'attendibilita' e la riproducibilita' dei risultati sperimentali sono fortemente legati alla sensibilita' e accuratezza della strumentazione in uso. La valutazione di tali parametri non e' sempre immediata. Viene proposto un metodo TPR per il calcolo quantitativo della sensibilita' strumentale.

  4. Characterization and antimicrobial activity of silver nanoparticles prepared by a thermal decomposition technique

    Science.gov (United States)

    Tam, Le Thi; Phan, Vu Ngoc; Lan, Hoang; Thuy, Nguyen Thanh; Hien, Tran Minh; Huy, Tran Quang; Quy, Nguyen Van; Chinh, Huynh Dang; Tung, Le Minh; Tuan, Pham Anh; Lam, Vu Dinh; Le, Anh-Tuan

    2013-11-01

    Recently, there has been an increasing need of efficient synthetic protocols using eco-friendly conditions including low costs and green chemicals for production of metal nanoparticles. In this work, silver nanoparticles (silver NPs) with average particle size about 10 nm were synthesized by using a thermal decomposition technique. Unlike the colloidal chemistry method, the thermal decomposition method developed has advantages such as the high crystallinity, single-reaction synthesis, and easy dispersion ability of the synthesized NPs in organic solvents. In a modified synthesis process, we used sodium oleate as a capping agent to modify the surface of silver NPs because the oleate has a C18 tail with a double bond in the middle, therefore, forming a kink which is to be effective for aggregative stability. Importantly, the as-synthesized silver NPs have demonstrated strong antimicrobial effects against various bacteria and fungi strains. Electron microscopic studies reveal physical insights into the interaction and bactericidal mechanism between the prepared silver NPs and tested bacteria in question. The observed excellent antibacterial and antifungal activity of the silver NPs make them ideal for disinfection and biomedicine applications.

  5. Metallic Concentration in Karnaphuly Estuary Sediment Using Neutron Activation Analysis Technique

    International Nuclear Information System (INIS)

    Rahman, A.K.M.R.; Chakroborty, S.R.; Roy, P.K.; Dev, A.K.

    2013-01-01

    Thousands of tonnes of liquid waste, dirt and garbage from different mills and factories from Kaptai to Chittagong are dumped unhindered into the Karnaphuli River. Pollutants enter the river directly from urban sewerage and industrial waste discharges. Ships pollute waterways in many ways. All theses can contribute to the heavy and other metals of the water bodies. To find out concentration of different metallic elements and make a comparison with the world reference values twenty one surface sediment samples were collected from the different locations of Karnaphuly River near Chittagong city drainage outlet. Neutron Activation Analysis (NAA) technique was used for detecting the concentration qualitatively and quantitatively using the 3 MW TRIGA MARK II research reactor of Atomic Energy Research Establishment, Savar, Dhaka. Pearson correlation among the elements obtained using SPSS software. Three transitional metals Fe, Cr and Co, two alkali metals Rb and Na, two lanthanides La and Ce, and two metalloids As and Sb were determined. The concentrations of elements were compared with the world reference values. Some elements are found in elevated level. (author)

  6. Proximal tendon-prosthesis junction for active tendon implants of the hand: a biomechanical comparison of 2 techniques.

    Science.gov (United States)

    Thompson, Matthew J; Owen, John R; McDowell, Charles L; Wayne, Jennifer S

    2015-01-01

    To study the biomechanical characteristics (percent stretch, stiffness, and ultimate load) of 2 tendon-prosthesis techniques used to connect the proximal tendon stump to silicone active tendon implants used in reconstruction of flexor tendons. We evaluated percent stretch following cyclic loading and at failure, stiffness during load to failure, and ultimate load of 16 tendon-prosthesis junctions using cadaveric canine flexor digitorum profundus tendons to re-create 2 junction techniques: the tendon loop (TL) and the polyester weave (PW). The TL junction showed greater percent stretch at a static load of 2 N, following 500 cycles of loading between 2 N and 50 N, and at peak load. The PW junction displayed greater stiffness from 50 to 150 N during load to failure. Both junctions failed at a mean ultimate load greater than 220 N. The described proximal junction techniques for active tendon implants were strong enough to resist early active motion in the immediate postoperative period without significant elongation. The PW technique displayed greater stiffness and ultimate load compared with the TL. Data on tendon-prosthesis characteristics of these 2 methods may aid the surgeon in choosing which junction technique to use, during surgical tensioning decisions, and in considering activity protocols after surgery. These data may also serve as a baseline for further investigations regarding active tendon implants. Copyright © 2015 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  7. Activation cross sections of α-particle induced nuclear reactions on hafnium and deuteron induced nuclear reaction on tantalum: production of ¹⁷⁸W/(178m)Ta generator.

    Science.gov (United States)

    Tárkányi, F; Takács, S; Ditrói, F; Hermanne, A; Ignatyuk, A V; Uddin, M S

    2014-09-01

    In the frame of a systematic study of charged particle production routes of medically relevant radionuclei, the excitation function for indirect production of (178m)Ta through (nat)Hf(α,xn)(178)W-(178m)Ta nuclear reaction was measured for the first time up to 40 MeV. In parallel, the side reactions (nat)Hf(α,x)(179,177,176,175)W, (183,182,178g,177,176,175)Ta, (179m,177m,175)Hf were also assessed. Stacked foil irradiation technique and γ-ray spectrometry were used. New experimental cross section data for the (nat)Ta(d,xn)(178)W reaction are also reported up to 40 MeV. The measured excitation functions are compared with the results of the ALICE-IPPE, and EMPIRE nuclear reaction model codes and with the TALYS 1.4 based data in the TENDL-2013 library. The thick target yields were deduced and compared with yields of other charged particle ((p,4n), (d,5n) and ((3)He,x)) production routes for (178)W. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Relations Between Autonomous Motivation and Leisure-Time Physical Activity Participation: The Mediating Role of Self-Regulation Techniques.

    Science.gov (United States)

    Nurmi, Johanna; Hagger, Martin S; Haukkala, Ari; Araújo-Soares, Vera; Hankonen, Nelli

    2016-04-01

    This study tested the predictive validity of a multitheory process model in which the effect of autonomous motivation from self-determination theory on physical activity participation is mediated by the adoption of self-regulatory techniques based on control theory. Finnish adolescents (N = 411, aged 17-19) completed a prospective survey including validated measures of the predictors and physical activity, at baseline and after one month (N = 177). A subsample used an accelerometer to objectively measure physical activity and further validate the physical activity self-report assessment tool (n = 44). Autonomous motivation statistically significantly predicted action planning, coping planning, and self-monitoring. Coping planning and self-monitoring mediated the effect of autonomous motivation on physical activity, although self-monitoring was the most prominent. Controlled motivation had no effect on self-regulation techniques or physical activity. Developing interventions that support autonomous motivation for physical activity may foster increased engagement in self-regulation techniques and positively affect physical activity behavior.

  9. Techniques for characterization of particulate matter: neutron activation analysis, x-ray photoelectron spectroscopy, scanning electron microscopy

    International Nuclear Information System (INIS)

    Hulett, L.D.; Dale, J.M.; Emery, J.F.; Lyon, W.S. Jr.; Fulkerson, W.

    1975-01-01

    Three techniques for particulate matter analysis are discussed: (1) neutron activation, which is a method that samples the entire specimen, both surface and bulk; (2) electron spectroscopy for chemical analysis (ESCA), which samples particle surfaces only; and (3) scanning electron microscopy (SEM), which reveals particle size and morphology, and can be used to determine composition differences in individual particles. These three techniques can be combined to construct highly detailed characterizations of particulate matter specimens. It is shown that multielement analysis can be quickly done by neutron activation and that surface analysis and individual particle analysis obtained by ESCA and SEM, are very important supplementary information

  10. Impact of resolution and downscaling technique in simulating recent Atlantic tropical cyclone activity

    Energy Technology Data Exchange (ETDEWEB)

    Caron, Louis-Philippe; Winger, Katja [CRCMD Network, UQAM, Montreal, QC (Canada); Jones, Colin G. [Swedish Meteorological and Hydrological Institute, Rossby Centre, Norrkoping (Sweden)

    2011-09-15

    Using the global environmental multiscale (GEM) model, we investigate the impact of increasing model resolution from 2 to 0.3 on Atlantic tropical cyclone activity. There is a clear improvement in the realism of Atlantic storms with increased resolution, in part, linked to a better representation of African easterly waves. The geographical distribution of a Genesis Potential Index, composed of large-scales fields known to impact cyclone formation, coincides closely in the model with areas of high cyclogenesis. The geographical distribution of this index also improves with resolution. We then compare two techniques for achieving local high resolution over the tropical Atlantic: a limited-area model driven at the boundaries by the global 2 GEM simulation and a global variable resolution model (GVAR). The limited-area domain and high-resolution part of the GVAR model coincide geographically, allowing a direct comparison between these two downscaling options. These integrations are further compared with a set of limited-area simulations employing the same domain and resolution, but driven at the boundaries by reanalysis. The limited-area model driven by reanalysis produces the most realistic Atlantic tropical cyclone variability. The GVAR simulation is clearly more accurate than the limited-area version driven by GEM-Global. Degradation in the simulated interannual variability is partly linked to the models failure to accurately reproduce the impact of atmospheric teleconnections from the equatorial Pacific and Sahel on Atlantic cyclogenesis. Through the use of a smaller limited-area grid, driven by GEM-Global 2 , we show that an accurate representation of African Easterly Waves is crucial for simulating Atlantic tropical cyclone variability. (orig.)

  11. Application of neutron activation analysis technique in elemental determination of lichen samples

    International Nuclear Information System (INIS)

    Djoko Prakoso Dwi Atmodjo; Syukria Kurniawati; Woro Yatu Niken Syahfitri; Nana Suherman; Dadang Supriatna

    2010-01-01

    Lichen is one of the biological materials as pollution monitor that can give information about level, direction, and history of various pollutants in environment. Small sample weights and elemental content of lichens is on the order of ppm, so that its characterization requires advanced analytical techniques that has high sensitivity and capable of analyzing samples with weight of - 25 mg, such as neutron activation analysis. In this research, determination of elements was done in lichen samples obtained from Kiaracondong and Holis areas in Bandung city, to understanding the difference of industrial exposure level on surrounding environment. Samples were irradiated in RSG GA Siwabessy, Serpong, at 15 MW for 1-2 and 60 minutes for short irradiation and long irradiation, respectively. The samples were then counted using HPGe detector with GENIE 2000 software. The level of element in lichen for Kiaracondong area were Co, Cr, Cs, Fe, Mg, Mn, Sb, Sc, and V in the range of 0.55-0.86, 1.47-2.57, 0.87-1.19, 540-1005, 949-1674, 34.91-45.94, 0.08-0.14, 0.16-0.31, and ≤ 2.33 mg/kg, respectively, while for Holis area were 1.04-2.37, 4.41-10.36, 0.41-0.89, 3166-709, 1131-1422, 40.97-72.51, 0.33-0.50, 0.98-2.18, and 5.30-13.05 mg/kg respectively. From these results, it is known that pollution exposure from the semi industrial area Holis provide greater influence than in the semi industrial area Kiaracondong. (author)

  12. Cost Analysis of MRI Services in Iran: An Application of Activity Based Costing Technique

    International Nuclear Information System (INIS)

    Bayati, Mohsen; Mahboub Ahari, Alireza; Badakhshan, Abbas; Gholipour, Mahin; Joulaei, Hassan

    2015-01-01

    Considerable development of MRI technology in diagnostic imaging, high cost of MRI technology and controversial issues concerning official charges (tariffs) have been the main motivations to define and implement this study. The present study aimed to calculate the unit-cost of MRI services using activity-based costing (ABC) as a modern cost accounting system and to fairly compare calculated unit-costs with official charges (tariffs). We included both direct and indirect costs of MRI services delivered in fiscal year 2011 in Shiraz Shahid Faghihi hospital. Direct allocation method was used for distribution of overhead costs. We used micro-costing approach to calculate unit-cost of all different MRI services. Clinical cost data were retrieved from the hospital registering system. Straight-line method was used for depreciation cost estimation. To cope with uncertainty and to increase the robustness of study results, unit costs of 33 MRI services was calculated in terms of two scenarios. Total annual cost of MRI activity center (AC) was calculated at USD 400,746 and USD 532,104 based on first and second scenarios, respectively. Ten percent of the total cost was allocated from supportive departments. The annual variable costs of MRI center were calculated at USD 295,904. Capital costs measured at USD 104,842 and USD 236, 200 resulted from the first and second scenario, respectively. Existing tariffs for more than half of MRI services were above the calculated costs. As a public hospital, there are considerable limitations in both financial and administrative databases of Shahid Faghihi hospital. Labor cost has the greatest share of total annual cost of Shahid Faghihi hospital. The gap between unit costs and tariffs implies that the claim for extra budget from health providers may not be relevant for all services delivered by the studied MRI center. With some adjustments, ABC could be implemented in MRI centers. With the settlement of a reliable cost accounting system

  13. Cost Analysis of MRI Services in Iran: An Application of Activity Based Costing Technique.

    Science.gov (United States)

    Bayati, Mohsen; Mahboub Ahari, Alireza; Badakhshan, Abbas; Gholipour, Mahin; Joulaei, Hassan

    2015-10-01

    Considerable development of MRI technology in diagnostic imaging, high cost of MRI technology and controversial issues concerning official charges (tariffs) have been the main motivations to define and implement this study. The present study aimed to calculate the unit-cost of MRI services using activity-based costing (ABC) as a modern cost accounting system and to fairly compare calculated unit-costs with official charges (tariffs). We included both direct and indirect costs of MRI services delivered in fiscal year 2011 in Shiraz Shahid Faghihi hospital. Direct allocation method was used for distribution of overhead costs. We used micro-costing approach to calculate unit-cost of all different MRI services. Clinical cost data were retrieved from the hospital registering system. Straight-line method was used for depreciation cost estimation. To cope with uncertainty and to increase the robustness of study results, unit costs of 33 MRI services was calculated in terms of two scenarios. Total annual cost of MRI activity center (AC) was calculated at USD 400,746 and USD 532,104 based on first and second scenarios, respectively. Ten percent of the total cost was allocated from supportive departments. The annual variable costs of MRI center were calculated at USD 295,904. Capital costs measured at USD 104,842 and USD 236, 200 resulted from the first and second scenario, respectively. Existing tariffs for more than half of MRI services were above the calculated costs. As a public hospital, there are considerable limitations in both financial and administrative databases of Shahid Faghihi hospital. Labor cost has the greatest share of total annual cost of Shahid Faghihi hospital. The gap between unit costs and tariffs implies that the claim for extra budget from health providers may not be relevant for all services delivered by the studied MRI center. With some adjustments, ABC could be implemented in MRI centers. With the settlement of a reliable cost accounting system

  14. Hydrogen Adsorption on Activated Carbon an Carbon Nanotubes Using Volumetric Differential Pressure Technique

    International Nuclear Information System (INIS)

    Sanip, S. M.; Saidin, M. A. R.; Aziz, M.; Ismail, A. F.

    2010-01-01

    A simple hydrogen adsorption measurement system utilizing the volumetric differential pressure technique has been designed, fabricated and calibrated. Hydrogen adsorption measurements have been carried out at temperatures 298 K and 77 K on activate carbon and carbon nanotubes with different surface areas. The adsorption data obtained will be helpful in understanding the adsorption property of the studied carbon materials using the fundamentals of adsorption theory. The principle of the system follows the Sievert-type method. The system measures a change in pressure between the reference cell, R1 and the sample cell S1, S2, S3 over a certain temperature range, R1, S1, S2, and S3 having known fixed volume. The sample temperatures will be monitored by thermocouple TC while the pressures in R1 an S1, S2, S3 will be measured using a digital pressure transducer. The maximum operating pressure of the pressure transducer is 20 bar and calibrated with an accuracy of ±0.01 bar. High purity hydrogen is being used in the system and the amount of samples for the study is between 1.0-2.0 grams. The system was calibrated using helium gas without any samples in S1, S2 an S3. This will provide a correction factor during the adsorption process providing an adsorption free reference point when using hydrogen gas resulting in a more accurate reading of the adsorption process by eliminating the errors caused by temperature expansion effects and other non-adsorption related phenomena. The ideal gas equation of state is applied to calculate the hydrogen adsorption capacity based on the differential pressure measurements. Activated carbon with a surface area of 644.87 m 2 /g showed a larger amount of adsorption as compared to multiwalled nanotubes (commercial) with a surface area of 119.68 m 2 /g. This study als indicated that there is a direct correlation between the amounts of hydrogen adsorbed an surface area of the carbon materials under the conditions studied and that the adsorption

  15. Is There a Relationship between the Usage of Active and Collaborative Learning Techniques and International Students' Study Anxiety?

    Science.gov (United States)

    Khoshlessan, Rezvan

    2013-01-01

    This study was designed to explore the relationships between the international students' perception of professors' instructional practices (the usage of active and collaborative learning techniques in class) and the international students' study anxiety. The dominant goal of this research was to investigate whether the professors' usage of active…

  16. High Temperature Elastic Properties of Reduced Activation Ferritic-Martensitic (RAFM) Steel Using Impulse Excitation Technique

    Science.gov (United States)

    Tripathy, Haraprasanna; Raju, Subramanian; Hajra, Raj Narayan; Saibaba, Saroja

    2018-03-01

    The polycrystalline elastic constants of an indigenous variant of 9Cr-1W-based reduced activation ferritic-martensitic (RAFM) steel have been determined as a function of temperature from 298 K to 1323 K (25 °C to 1000 °C), using impulse excitation technique (IET). The three elastic constants namely, Young's modulus E, shear modulus G, and bulk modulus B, exhibited significant softening with increasing temperature, in a pronounced non-linear fashion. In addition, clearly marked discontinuities in their temperature variations are noticed in the region, where ferrite + carbides → austenite phase transformation occurred upon heating. Further, the incidence of austenite → martensite transformation upon cooling has also been marked by a step-like jump in both elastic E and shear moduli G. The martensite start M s and M f finish temperatures estimated from this study are, M s = 652 K (379 °C) and M f =580 K (307 °C). Similarly, the measured ferrite + carbide → austenite transformation onset ( Ac 1) and completion ( Ac 3) temperatures are found to be 1126 K and 1143 K (853 °C and 870 °C), respectively. The Poisson ratio μ exhibited distinct discontinuities at phase transformation temperatures; but however, is found to vary in the range 0.27 to 0.29. The room temperature estimates of E, G, and μ for normalized and tempered microstructure are found to be 219 GPa, 86.65 GPa, and 0.27, respectively. For the metastable austenite phase, the corresponding values are: 197 GPa, 76.5 GPa, and 0.29, respectively. The measured elastic properties as well as their temperature dependencies are found to be in good accord with reported estimates for other 9Cr-based ferritic-martensitic steel grades. Estimates of θ D el , the elastic Debye temperature and γ G, the thermal Grüneisen parameter obtained from measured bulk elastic properties are found to be θ D el = 465 K (192 °C) and γ G = 1.57.

  17. Neutron radiography activity in the european program cost 524: Neutron imaging techniques

    International Nuclear Information System (INIS)

    Chirco, P.; Bach, P.; Lehmann, E.; Balasko, M.

    2001-01-01

    COST is a framework for scientific and technical cooperation, allowing the coordination of national research on a European level, including 32 member countries. Participation of institutes from non-COST countries is possible. From an initial 7 Actions in 1971, COST has grown to 200 Actions at the beginning of 2000. COST Action 524 is under materials domain, the title of which being 'Neutron Imaging Techniques for the Detection of Defects in Materials', under the Chairmanship of Dr. P. Chirco (I.N.F.N.). The following countries are represented in the Management Committee of Action 524: Italy, France, Austria, Germany, United Kingdom, Hungary, Switzerland, Spain, Czech Republic, Slovenia, and Russia. The six working groups of this Action are working respectively on standardization of neutron radiography techniques, on aerospace application, on civil engineering applications, on comparison and integration of neutron imaging techniques with other NDT, on neutron tomography, and on non radiographic techniques such as neutron scattering techniques. A specific effort is devoted to standardization issues, with respect to other non European standards. Results of work performed in the COST frame are published or will be published in the review INSIGHT, edited by the British Institute of Non Destructive Testing

  18. U P1, an example for advanced techniques applied to high level activity dismantling

    International Nuclear Information System (INIS)

    Michel-Noel, M.; Calixte, O.; Blanchard, S.; Bani, J.; Girones, P.; Moitrier, C.; Terry, G.; Bourdy, R.

    2014-01-01

    The U P1 plant on the CEA Marcoule site was dedicated to the processing of spend fuels from the G1, G2 and G3 plutonium-producing reactors. This plant represents 20.000 m 2 of workshops housing about 1000 hot cells. In 1998, a huge program for the dismantling and cleaning-up of the UP1 plant was launched. CEA has developed new techniques to face the complexity of the dismantling operations. These techniques include immersive virtual reality, laser cutting, a specific manipulator arm called MAESTRO and remote handling. (A.C.)

  19. Temporal Courses in EEG Theta and Alpha Activity in the Dynamic Health Qigong Techniques Wu Qin Xi and Liu Zi Jue.

    Science.gov (United States)

    Henz, Diana; Schöllhorn, Wolfgang I

    2017-01-01

    Health Qigong is a common technique of Traditional Chinese Medicine applied to strengthen mental and physical health. Several studies report increases in EEG theta and alpha activity after meditative Qigong techniques indicating a relaxed state of mind. To date, little is known on the effects of dynamic Health Qigong techniques that comprise bodily movements on brain activity. In the current study, we compared effects of two dynamic Health Qigong techniques on EEG brain activity. Subjects performed the techniques Wu Qin Xi (five animals play) and Liu Zi Jue (six healing sounds) in a within-subjects design. Eyes-open and eyes-closed resting EEG was recorded before and immediately after each 15-min practice block. Additionally, the Profile of Mood States (POMS) questionnaire was administered at pretest, and after each 15-min practice block. Results show a decrease in alpha activity after 15 min, followed by an increase after 30 min in the Health Qigong technique Liu Zi Jue . Theta activity was decreased after 15 min, followed by an increase after 30 min in the technique Wu Qin Xi . Results of the POMS indicated an increased vigor-activity level with decreased fatigue and tension-anxiety levels in both techniques after 30 min of practice. Our results demonstrate different temporal dynamics in EEG theta and alpha activity for the Health Qigong techniques Wu Qin Xi and Liu Zi Jue . We hypothesize that the found brain activation patterns result from different attentional focusing styles and breathing techniques performed during the investigated Health Qigong techniques.

  20. Annual Report on Scientific Activities in 1997 of Department of Physics and Nuclear Techniques, Academy of Mining and Metallurgy, Cracow

    International Nuclear Information System (INIS)

    Wolny, J.; Olszynska, E.

    1998-01-01

    The Annual Report 1997 is the review of scientific activities of the Department of Nuclear Physics and Techniques (DNPT) of the Academy of Mining and Metallurgy, Cracow. The studies connected with: radiometric analysis, nuclear electronics, solid state physics, elementary particle and detectors, medical physics, physics of environment, theoretical physics, nuclear geophysics, energetic problems, industrial radiometry and tracer techniques have been broadly presented. The fill list of works being published and presented at scientific conferences in 1997 by the staff of DNPT are also included

  1. Diffusion Bonding Beryllium to Reduced Activation Ferritic Martensitic Steel: Development of Processes and Techniques

    Science.gov (United States)

    Hunt, Ryan Matthew

    Only a few materials are suitable to act as armor layers against the thermal and particle loads produced by magnetically confined fusion. These candidates include beryllium, tungsten, and carbon fiber composites. The armor layers must be joined to the plasma facing components with high strength bonds that can withstand the thermal stresses resulting from differential thermal expansion. While specific joints have been developed for use in ITER (an experimental reactor in France), including beryllium to CuCrZr as well as tungsten to stainless steel interfaces, joints specific to commercially relevant fusion reactors are not as well established. Commercial first wall components will likely be constructed front Reduced Activation Ferritic Martensitic (RAFM) steel, which will need to be coating with one of the three candidate materials. Of the candidates, beryllium is particularly difficult to bond, because it reacts during bonding with most elements to form brittle intermetallic compounds. This brittleness is unacceptable, as it can lead to interface crack propagation and delamination of the armor layer. I have attempted to overcome the brittle behavior of beryllium bonds by developing a diffusion bonding process of beryllium to RAFM steel that achieves a higher degree of ductility. This process utilized two bonding aids to achieve a robust bond: a. copper interlayer to add ductility to the joint, and a titanium interlayer to prevent beryllium from forming unwanted Be-Cu intermetallics. In addition, I conducted a series of numerical simulations to predict the effect of these bonding aids on the residual stress in the interface. Lastly, I fabricated and characterized beryllium to ferritic steel diffusion bonds using various bonding parameters and bonding aids. Through the above research, I developed a process to diffusion bond beryllium to ferritic steel with a 150 M Pa tensile strength and 168 M Pa shear strength. This strength was achieved using a Hot Isostatic

  2. A Severe Weather Laboratory Exercise for an Introductory Weather and Climate Class Using Active Learning Techniques

    Science.gov (United States)

    Grundstein, Andrew; Durkee, Joshua; Frye, John; Andersen, Theresa; Lieberman, Jordan

    2011-01-01

    This paper describes a new severe weather laboratory exercise for an Introductory Weather and Climate class, appropriate for first and second year college students (including nonscience majors), that incorporates inquiry-based learning techniques. In the lab, students play the role of meteorologists making forecasts for severe weather. The…

  3. Ex vivo activity quantification in micrometastases at the cellular scale using the α-camera technique

    DEFF Research Database (Denmark)

    Chouin, Nicolas; Lindegren, Sture; Frost, Sofia H L

    2013-01-01

    Targeted α-therapy (TAT) appears to be an ideal therapeutic technique for eliminating malignant circulating, minimal residual, or micrometastatic cells. These types of malignancies are typically infraclinical, complicating the evaluation of potential treatments. This study presents a method of ex...

  4. Chemical Variability and Biological Activities of Brassica rapa var. rapifera Parts Essential Oils Depending on Geographic Variation and Extraction Technique.

    Science.gov (United States)

    Saka, Boualem; Djouahri, Abderrahmane; Djerrad, Zineb; Terfi, Souhila; Aberrane, Sihem; Sabaou, Nasserdine; Baaliouamer, Aoumeur; Boudarene, Lynda

    2017-06-01

    In the present work, the Brassica rapa var. rapifera parts essential oils and their antioxidant and antimicrobial activities were investigated for the first time depending on geographic origin and extraction technique. Gas-chromatography (GC) and GC/mass spectrometry (MS) analyses showed several constituents, including alcohols, aldehydes, esters, ketones, norisoprenoids, terpenic, nitrogen and sulphur compounds, totalizing 38 and 41 compounds in leaves and root essential oils, respectively. Nitrogen compounds were the main volatiles in leaves essential oils and sulphur compounds were the main volatiles in root essential oils. Qualitative and quantitative differences were found among B. rapa var. rapifera parts essential oils collected from different locations and extracted by hydrodistillation and microwave-assisted hydrodistillation techniques. Furthermore, our findings showed a high variability for both antioxidant and antimicrobial activities. The highlighted variability reflects the high impact of plant part, geographic variation and extraction technique on chemical composition and biological activities, which led to conclude that we should select essential oils to be investigated carefully depending on these factors, in order to isolate the bioactive components or to have the best quality of essential oil in terms of biological activities and preventive effects in food. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

  5. Best available techniques (BATs) for oil spill response in the Mediterranean Sea: calm sea and presence of economic activities.

    Science.gov (United States)

    Guidi, Giambattista; Sliskovic, Merica; Violante, Anna Carmela; Vukic, Luka

    2016-01-01

    An oil spill is the accidental or intentional discharge of petroleum products into the environment due to human activities. Although oil spills are actually just a little percent of the total world oil pollution problem, they represent the most visible form of it. The impact on the ecosystems can be severe as well as the impact on economic activities. Oil spill cleanup is a very difficult and expensive activity, and many techniques are available for it. In previous works, a methodology based on different kinds of criteria in order to come to the most satisfactory technique was proposed and the relative importance of each impact criterion on the basis of the Saaty's Analytic Hierarchy Process (AHP) was also evaluated. After a review of the best available techniques (BATs) available for oil spill response, this work suggests criteria for BATs' selection when oil spills occur in the Mediterranean Sea under well-defined circumstances: calm sea and presence of economic activities in the affected area. A group of experts with different specializations evaluated the alternative BATs by means of AHP method taking into account their respective advantages and disadvantages.

  6. Improved techniques in data analysis and interpretation of potential fields: examples of application in volcanic and seismically active areas

    Directory of Open Access Journals (Sweden)

    G. Florio

    2002-06-01

    Full Text Available Geopotential data may be interpreted by many different techniques, depending on the nature of the mathematical equations correlating specific unknown ground parameters to the measured data set. The investigation based on the study of the gravity and magnetic anomaly fields represents one of the most important geophysical approaches in the earth sciences. It has now evolved aimed both at improving of known methods and testing other new and reliable techniques. This paper outlines a general framework for several applications of recent techniques in the study of the potential methods for the earth sciences. Most of them are here described and significant case histories are shown to illustrate their reliability on active seismic and volcanic areas.

  7. PET/CT colonography: a novel non-invasive technique for assessment of extent and activity of ulcerative colitis

    Energy Technology Data Exchange (ETDEWEB)

    Das, Chandan J.; Sharma, Raju [All India Institute of Medical Sciences, Department of Radiodiagnosis, New Delhi (India); Makharia, Govind K.; Tiwari, Rajeew P. [All India Institute of Medical Sciences, Department of Gastroenterology and Human Nutrition, New Delhi (India); Kumar, Rakesh; Kumar, Rajender; Malhotra, Arun [All India Institute of Medical Sciences, Department of Nuclear Medicine, New Delhi (India)

    2010-04-15

    Extent of involvement and activity of ulcerative colitis (UC) is best evaluated by colonoscopy. Colonoscopy however carries risk during acute exacerbation. We investigated the utility of PET/CT colonography for assessment of extent and activity of UC. Within a 1-week window, 15 patients with mild to moderately active UC underwent colonoscopy and PET/CT colonography 60 min after injection of 10 mCi of {sup 18}F-fluorodeoxyglucose (FDG). PET activity score based on the amount of FDG uptake and endoscopic mucosal activity in seven colonic segments of each patient was recorded. The mean maximum standardized uptake value (SUV{sub max}) of seven segments was compared with activity in liver. A PET activity grade of 0, 1, 2 or 3 was assigned to each region depending upon their SUV{sub max} ratio (colon segment to liver). The extent of disease was left-sided colitis in five and pancolitis in ten. The mean Ulcerative Colitis Disease Activity Index (UCDAI) was 7.6. The number of segments involved as per colonoscopic evaluation and PET/CT colonography was 67 and 66, respectively. There was a good correlation for extent evaluation between the two modalities (kappa 55.3%, p = 0.02). One patient had grade 0 PET activity, nine had grade 2 and five had grade 3 PET activity. In six patients, there was one to one correlation between PET activity grades with that of endoscopic grade. One patient showed activity in the sacroiliac joint suggesting active sacroiliitis. PET/CT colonography is a novel non-invasive technique for the assessment of extent and activity of the disease in patients with UC. (orig.)

  8. Developing sensor activity relationships for the JPL electronic nose sensors using molecular modeling and QSAR techniques

    Science.gov (United States)

    Shevade, A. V.; Ryan, M. A.; Homer, M. L.; Jewell, A. D.; Zhou, H.; Manatt, K.; Kisor, A. K.

    2005-01-01

    We report a Quantitative Structure-Activity Relationships (QSAR) study using Genetic Function Approximations (GFA) to describe the polymer-carbon composite sensor activities in the JPL Electronic Nose, when exposed to chemical vapors at parts-per-million concentration levels.

  9. Developments of a bonding technique for optical materials by a surface activation method

    International Nuclear Information System (INIS)

    Sugiyama, Akira; Oda, Tomohiro; Abe, Tomoyuki; Kusunoki, Isao

    2005-01-01

    We started developing the laser crystal bounding by the surface activation method which can splice crystals together without using hydrogen bonding. For the surface activation, neutral argon beams were used for irradiation of specimens. In the bonding trials with sapphire crystals, we recognized possibility of the bonding method for optical elements. (author)

  10. The Effect of "Pumping" and "Nonpumping" Techniques on Velocity Production and Muscle Activity During Field-Based BMX Cycling.

    Science.gov (United States)

    Rylands, Lee P; Hurst, Howard T; Roberts, Simon J; Graydon, Robert W

    2017-02-01

    Rylands, LP, Hurst, HT, Roberts, SJ, and Graydon, RW. The effect of "pumping" and "nonpumping" techniques on velocity production and muscle activity during field-based BMX cycling. J Strength Cond Res 31(2): 445-450, 2017-The aim of the current study was to determine if a technique called "pumping" had a significant effect on velocity production in Bicycle Motocross (BMX) cycling. Ten National standard male BMX riders fitted with surface electromyography (sEMG) sensors completed a timed lap of an indoor BMX track using the technique of pumping, and a lap without pumping. The lap times were recorded for both trials and their surface sEMG was recorded to ascertain any variation in muscle activation of the biceps brachii, triceps brachii, vastus lateralis, and medial gastrocnemius. The findings revealed no significant differences between any of muscle groups (p > 0.05). However, significant differences (p < 0.001) were observed between the pumping and nonpumping trials for both mean lap velocity (42 ± 1.8 km·h, 33 ± 2.9 km·h, respectively) and lap times (43.3 ± 3.1 seconds, 34.7 ± 1.49 seconds, respectively). The lap times recorded for the pumping trials were 19.50 ± 4.25% lower than the nonpumping, whereas velocity production was 21.81 ± 5.31% greater in the pumping trial compared with the nonpumping trial. The technique of pumping contributed significantly to velocity production, although not at the cost of additional muscle activity. From a physiological and technical perspective, coaches and riders should prioritize this technique when devising training regimes.

  11. Decision support in maintenance activity by using modern techniques for equipment condition monitoring

    Directory of Open Access Journals (Sweden)

    Paunescu Ionel

    2017-01-01

    Full Text Available As the complexity of the equipment and embedded technologies grow, the decision to take action for keeping the normal operation condition is increasingly challenging. The development of methods and instruments meant to improve availability, reliability and maintainability of equipment involves research on the of the related subassemblies and components in various conditions of operation. To maximize technical system performance, to ensure the operational safety and to decrease functioning costs, the authors of this paper propose the implementation of some monitoring techniques, using technical indicators specific to the system (markers for maintenance and an innovative process based on the electricity footprint method for monitoring the operational behavior of the critical items in a kinematic chain. The analysis of the monitoring techniques presented in this paper leads to an effective act for keeping the normal operation condition of a technical system.

  12. Paladini’s activity in Vizzini (Catania: constituent materials and executive techniques

    Directory of Open Access Journals (Sweden)

    Mauro Sebastianelli

    2007-07-01

    Full Text Available The present study aiming at defining the constituent materials and understanding the executive techniques used by Filippo Paladini during his painting heyday, perfectly displays the main characteristics of the painter’s ability – famous expression of the manneristic Tuscan and Tuscan-Roman culture with a clear emphasis on the new expressionist style and methods introduced after Caravaggio’s works. Some technical information in terms of Paladini’s technique were gathered, focusing the attention on some depictions corresponding to the mature period of the artist. We here refer to three important and relevant art works executed in Vizzini (Sicily, Catania – respectively the Madonna of Mercede, the San Lorenzo Martyrdom and the Deposition – in a fair conservation state.

  13. Active damping technique for small DC-link capacitor based drive system

    DEFF Research Database (Denmark)

    Maheshwari, Ram Krishan; Munk-Nielsen, Stig; Henriksen, Bjarne

    2010-01-01

    A detailed model of Adjustable Speed Drive (ASD) is discussed, which yield a general rule for active damping in a small DC link based drive. A desired value of input LC resonance damping coefficient can be achieved by changing gain parameters. The modified state space matrix due to active damping...... terms is also presented. The performance of the active damping is evaluated based on experimental results. A simple model is presented which can be used to measure the damping factor provided by the system parameters only.......A detailed model of Adjustable Speed Drive (ASD) is discussed, which yield a general rule for active damping in a small DC link based drive. A desired value of input LC resonance damping coefficient can be achieved by changing gain parameters. The modified state space matrix due to active damping...

  14. A technique for estimating activity in whole nerve trunks applied to the cervical sympathetic trunk, in the rabbit.

    Science.gov (United States)

    Hellström, F; Roatta, S; Johansson, H; Passatore, M

    1999-12-24

    The changes in sympathetic outflow may be evaluated from the amplitude of the antidromic compound action potential (ACAP) according to the collision technique described by Douglas and Ritchie (Douglas, W.W. and Ritchie J.M., A technique for recording functional activity in specific groups of medullated and non-medullated fibers in whole nerve trunks. J. Physiol., 138(1957) 19-30). This technique was revised, taking into account the depressant action exerted by antidromic stimulation on sympathetic preganglionic neurones (SPNs). Cervical sympathetic nerve (CSN) of rabbits was used as experimental model. Stimulation frequencies of 0.2-0.5 Hz were found to be sufficiently low to avoid depressant actions on CSN spontaneous activity; they were employed to test the sensitivity of the technique during different experimental manoeuvres, such as changes in pulmonary-ventilation, baroreceptor unloading and arousal stimuli. In addition a procedure was devised to calibrate the ACAP amplitude: high frequency antidromic stimulation was used to induce a complete and transient inhibition of SPNs which allows to record the ACAP maximum amplitude. ACAPs recorded in various experimental conditions can then be expressed as percentage of this value.

  15. An intelligent signal processing and pattern recognition technique for defect identification using an active sensor network

    Science.gov (United States)

    Su, Zhongqing; Ye, Lin

    2004-08-01

    The practical utilization of elastic waves, e.g. Rayleigh-Lamb waves, in high-performance structural health monitoring techniques is somewhat impeded due to the complicated wave dispersion phenomena, the existence of multiple wave modes, the high susceptibility to diverse interferences, the bulky sampled data and the difficulty in signal interpretation. An intelligent signal processing and pattern recognition (ISPPR) approach using the wavelet transform and artificial neural network algorithms was developed; this was actualized in a signal processing package (SPP). The ISPPR technique comprehensively functions as signal filtration, data compression, characteristic extraction, information mapping and pattern recognition, capable of extracting essential yet concise features from acquired raw wave signals and further assisting in structural health evaluation. For validation, the SPP was applied to the prediction of crack growth in an alloy structural beam and construction of a damage parameter database for defect identification in CF/EP composite structures. It was clearly apparent that the elastic wave propagation-based damage assessment could be dramatically streamlined by introduction of the ISPPR technique.

  16. Evaluation of data mining techniques for suspicious network activity classification using honeypots data

    Science.gov (United States)

    Grégio, André; Santos, Rafael; Montes, Antonio

    2007-04-01

    As the amount and types of remote network services increase, the analysis of their logs has become a very difficult and time consuming task. There are several ways to filter relevant information and provide a reduced log set for analysis, such as whitelisting and intrusion detection tools, but all of them require too much fine- tuning work and human expertise. Nowadays, researchers are evaluating data mining approaches for intrusion detection in network logs, using techniques such as genetic algorithms, neural networks, clustering algorithms, etc. Some of those techniques yield good results, yet requiring a very large number of attributes gathered by network traffic to detect useful information. In this work we apply and evaluate some data mining techniques (K-Nearest Neighbors, Artificial Neural Networks and Decision Trees) in a reduced number of attributes on some log data sets acquired from a real network and a honeypot, in order to classify traffic logs as normal or suspicious. The results obtained allow us to identify unlabeled logs and to describe which attributes were used for the decision. This approach provides a very reduced amount of logs to the network administrator, improving the analysis task and aiding in discovering new kinds of attacks against their networks.

  17. Evaluation of the effect of energy conservation techniques in the performance of activity of daily living tasks.

    Science.gov (United States)

    Ip, W M; Woo, J; Yue, S Y; Kwan, M; Sum, S M W; Kwok, T; Hui, S S C

    2006-03-01

    To determine whether energy conservation techniques during common activity of daily living tasks actually result in lower energy expenditure, and to document subjective comments regarding any differences in the perceived level of effort. Descriptive study comparing energy expenditure in three tasks with and without energy conservation techniques, taking into account the effect of age. Occupational therapy department of a rehabilitation hospital in Hong Kong. One hundred and eight subjects (30 or = 60 years) were recruited from staff and members of an elderly social centre in the community. Energy expenditure was measured using a portable indirect calorimetry system for three tasks (shopping, washing clothes and hanging laundry) with and without energy conservation techniques. Dyspnoea, fatigue and perceived exertion were measured using visual analogue scales. Reduction in energy expenditure using energy conservation techniques for shopping and hanging laundry was documented in younger subjects only (O2 consumption fell from 13.8 +/- 3.7 to 12.2 +/- 3.8 mL/min per kg for shopping, P conservation techniques. For washing clothes, no reduction in energy expenditure was observed in either age groups. Measurable benefits were observed with use of labour-saving equipment and avoidance of overhead reaching in younger subjects only.

  18. Simulation model of harmonics reduction technique using shunt active filter by cascade multilevel inverter method

    Science.gov (United States)

    Andreh, Angga Muhamad; Subiyanto, Sunardiyo, Said

    2017-01-01

    Development of non-linear loading in the application of industry and distribution system and also harmonic compensation becomes important. Harmonic pollution is an urgent problem in increasing power quality. The main contribution of the study is the modeling approach used to design a shunt active filter and the application of the cascade multilevel inverter topology to improve the power quality of electrical energy. In this study, shunt active filter was aimed to eliminate dominant harmonic component by injecting opposite currents with the harmonic component system. The active filter was designed by shunt configuration with cascaded multilevel inverter method controlled by PID controller and SPWM. With this shunt active filter, the harmonic current can be reduced so that the current wave pattern of the source is approximately sinusoidal. Design and simulation were conducted by using Power Simulator (PSIM) software. Shunt active filter performance experiment was conducted on the IEEE four bus test system. The result of shunt active filter installation on the system (IEEE four bus) could reduce THD current from 28.68% to 3.09%. With this result, the active filter can be applied as an effective method to reduce harmonics.

  19. Development of a Rapid Soil Water Content Detection Technique Using Active Infrared Thermal Methods for In-Field Applications

    Directory of Open Access Journals (Sweden)

    Federico Pallottino

    2011-10-01

    Full Text Available The aim of this study was to investigate the suitability of active infrared thermography and thermometry in combination with multivariate statistical partial least squares analysis as rapid soil water content detection techniques both in the laboratory and the field. Such techniques allow fast soil water content measurements helpful in both agricultural and environmental fields. These techniques, based on the theory of heat dissipation, were tested by directly measuring temperature dynamic variation of samples after heating. For the assessment of temperature dynamic variations data were collected during three intervals (3, 6 and 10 s. To account for the presence of specific heats differences between water and soil, the analyses were regulated using slopes to linearly describe their trends. For all analyses, the best model was achieved for a 10 s slope. Three different approaches were considered, two in the laboratory and one in the field. The first laboratory-based one was centred on active infrared thermography, considered measurement of temperature variation as independent variable and reported r = 0.74. The second laboratory–based one was focused on active infrared thermometry, added irradiation as independent variable and reported r = 0.76. The in-field experiment was performed by active infrared thermometry, heating bare soil by solar irradiance after exposure due to primary tillage. Some meteorological parameters were inserted as independent variables in the prediction model, which presented r = 0.61. In order to obtain more general and wide estimations in-field a Partial Least Squares Discriminant Analysis on three classes of percentage of soil water content was performed obtaining a high correct classification in the test (88.89%. The prediction error values were lower in the field with respect to laboratory analyses. Both techniques could be used in conjunction with a Geographic Information System for obtaining detailed information

  20. Comparative Study of two PWM techniques for Three Phase Shunt Hybrid Active Power Filter to Suppress Line Current Harmonics

    OpenAIRE

    SELVAMUTHUKUMARAN Rajasekar; NATARAJAN Muraly; PERIANAYAGAM Ajay-D-VimalRaj; MAHALINGAM Sudhakaran

    2010-01-01

    This paper investigates the performanceand comparison of two pulse-width-modulation (PWM)techniques by employing direct current control strategyapplied to three phase shunt hybrid active power filter(SHAPF). The objective of SHAPF is to eliminate linecurrent harmonics and to incur reactive powercompensation. The direct current control strategy isimplemented using Standard PWM (S-PWM) and aModified PWM (M-WM), in order to compensatecurrent harmonic and reactive power generated bydifferent load...

  1. Development of a rapid soil water content detection technique using active infrared thermal methods for in-field applications.

    Science.gov (United States)

    Antonucci, Francesca; Pallottino, Federico; Costa, Corrado; Rimatori, Valentina; Giorgi, Stefano; Papetti, Patrizia; Menesatti, Paolo

    2011-01-01

    The aim of this study was to investigate the suitability of active infrared thermography and thermometry in combination with multivariate statistical partial least squares analysis as rapid soil water content detection techniques both in the laboratory and the field. Such techniques allow fast soil water content measurements helpful in both agricultural and environmental fields. These techniques, based on the theory of heat dissipation, were tested by directly measuring temperature dynamic variation of samples after heating. For the assessment of temperature dynamic variations data were collected during three intervals (3, 6 and 10 s). To account for the presence of specific heats differences between water and soil, the analyses were regulated using slopes to linearly describe their trends. For all analyses, the best model was achieved for a 10 s slope. Three different approaches were considered, two in the laboratory and one in the field. The first laboratory-based one was centred on active infrared thermography, considered measurement of temperature variation as independent variable and reported r = 0.74. The second laboratory-based one was focused on active infrared thermometry, added irradiation as independent variable and reported r = 0.76. The in-field experiment was performed by active infrared thermometry, heating bare soil by solar irradiance after exposure due to primary tillage. Some meteorological parameters were inserted as independent variables in the prediction model, which presented r = 0.61. In order to obtain more general and wide estimations in-field a Partial Least Squares Discriminant Analysis on three classes of percentage of soil water content was performed obtaining a high correct classification in the test (88.89%). The prediction error values were lower in the field with respect to laboratory analyses. Both techniques could be used in conjunction with a Geographic Information System for obtaining detailed information on soil heterogeneity.

  2. Comparative Evaluation of Different Extraction Techniques and Solvents for the Assay of Phytochemicals and Antioxidant Activity of Hashemi Rice Bran.

    Science.gov (United States)

    Ghasemzadeh, Ali; Jaafar, Hawa Z E; Juraimi, Abdul Shukor; Tayebi-Meigooni, Amin

    2015-06-11

    Secondary metabolite contents (total phenolic, flavonoid, tocopherol, and tocotrienol) and antioxidant activities of Hashemi rice bran extracts obtained by ultrasound-assisted and traditional solvent (ethanol and 50:50 (v/v) ethanol-water) extraction techniques were compared. Phenolic and, flavonoid compounds were identified using ultra-high performance liquid chromatography and method validation was performed. Significant differences (p phytochemical contents and antioxidant activities. The extracts obtained using the ethanol-water (50:50 v/v) ultrasonic technique showed the highest amounts of total phenolics (288.40 mg/100 g dry material (DM)), total flavonoids (156.20 mg/100 g DM), and total tocotrienols (56.23 mg/100 g DM), and the highest antioxidant activity (84.21% 1,1-diphenyl-2-picrylhydrazyl (DPPH), 65.27% β-carotene-linoleic bleaching and 82.20% nitric oxide scavenging activity). Secondary metabolite contents and antioxidant activities of the rice bran extracts varied depending of the extraction method used, and according to their effectiveness, these were organized in a decreasing order as follows: ethanol-water (50:50 v/v) ultrasonic, ethanol-water (50:50 v/v) maceration, ethanol ultrasonic and ethanol maceration methods. Ferulic, gallic and chlorogenic acids were the most abundant phenolic compounds in rice bran extracts. The phytochemical constituents of Hashemi rice bran and its antioxidant properties provides insights into its potential application to promote health.

  3. Active Flow Control with Adaptive Design Techniques for Improved Aircraft Safety, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The increased aircraft safety potential of active flow control using synthetic jets - specifically, using synthetic jets on the leading edge of the wing to delay...

  4. A new multiplexing single molecule technique for measuring restriction enzyme activity

    Science.gov (United States)

    Harbottle, Allison; Cavanaugh, Jillian; Gordon, Wendy; Loparo, Joseph; Price, Allen

    2012-02-01

    We present a new multiplexing single molecule method for observing the cleavage of DNAs by restriction enzymes. DNAs are attached to a surface at one end using a biotin-streptavidin link and to a micro bead at the other end via a digoxigenin-antidigoxigenin link. The DNAs are stretched by applying a flow. After introduction of the restriction enzyme, the exact time of cleavage of individual DNAs is recorded with video microscopy. We can image hundreds to thousands of DNAs in a single experiment. We are using our technique to search for the signature of facilitated diffusion in the measured rate dependence on ionic strength.

  5. Comparative Evaluation of Different Extraction Techniques and Solvents for the Assay of Phytochemicals and Antioxidant Activity of Hashemi Rice Bran

    Directory of Open Access Journals (Sweden)

    Ali Ghasemzadeh

    2015-06-01

    Full Text Available Secondary metabolite contents (total phenolic, flavonoid, tocopherol, and tocotrienol and antioxidant activities of Hashemi rice bran extracts obtained by ultrasound-assisted and traditional solvent (ethanol and 50:50 (v/v ethanol-water extraction techniques were compared. Phenolic and, flavonoid compounds were identified using ultra-high performance liquid chromatography and method validation was performed. Significant differences (p < 0.05 were observed among the different extraction techniques upon comparison of phytochemical contents and antioxidant activities. The extracts obtained using the ethanol-water (50:50 v/v ultrasonic technique showed the highest amounts of total phenolics (288.40 mg/100 g dry material (DM, total flavonoids (156.20 mg/100 g DM, and total tocotrienols (56.23 mg/100 g DM, and the highest antioxidant activity (84.21% 1,1-diphenyl-2-picrylhydrazyl (DPPH, 65.27% β-carotene-linoleic bleaching and 82.20% nitric oxide scavenging activity. Secondary metabolite contents and antioxidant activities of the rice bran extracts varied depending of the extraction method used, and according to their effectiveness, these were organized in a decreasing order as follows: ethanol-water (50:50 v/v ultrasonic, ethanol-water (50:50 v/v maceration, ethanol ultrasonic and ethanol maceration methods. Ferulic, gallic and chlorogenic acids were the most abundant phenolic compounds in rice bran extracts. The phytochemical constituents of Hashemi rice bran and its antioxidant properties provides insights into its potential application to promote health.

  6. Control System Design of Shunt Active Power Filter Based on Active Disturbance Rejection and Repetitive Control Techniques

    Directory of Open Access Journals (Sweden)

    Le Ge

    2014-01-01

    Full Text Available To rely on joint active disturbance rejection control (ADRC and repetitive control (RC, in this paper, a compound control law for active power filter (APF current control system is proposed. According to the theory of ADRC, the uncertainties in the model and from the circumstance outside are considered as the unknown disturbance to the system. The extended state observer can evaluate the unknown disturbance. Next, RC is introduced into current loop to improve the steady characteristics. The ADRC is used to get a good dynamic performance, and RC is used to get a good static performance. A good simulation result is got through choosing and changing the parameters, and the feasibility, adaptability, and robustness of the control are testified by this result.

  7. Behaviour change techniques to change the postnatal eating and physical activity behaviours of women who are obese: a qualitative study.

    Science.gov (United States)

    Smith, D M; Taylor, W; Lavender, T

    2016-01-01

    To explore the experiences of postnatal women who are obese [body mass index (BMI) ≥ 30 kg/m(2) ] in relation to making behaviour changes and use of behaviour change techniques (BCTs). Qualitative interview study. Greater Manchester, UK. Women who were 1 year postnatal aged ≥18 years, who had an uncomplicated singleton pregnancy, and an antenatal booking BMI ≥ 30 kg/m(2) . Eighteen semi-structured, audio-recorded interviews were conducted by a research midwife with women who volunteered to be interviewed 1 year after taking part in a pilot randomised controlled trial. The six stages of thematic analysis were followed to understand the qualitative data. The Behavior Change Technique Taxonomy (version 1) was used to label the behaviour change techniques (BCTs) reported by women. Themes derived from 1-year postnatal interview transcripts. Two themes were evident: 1. A focused approach to postnatal weight management: women reported making specific changes to their eating and physical activity behaviours, and 2. Need for support: six BCTs were reported as helping women make changes to their eating and physical activity behaviours; three were reported more frequently than others: Self-monitoring of behaviour (2.3), Prompts/cues (7.1) and Social support (unspecified; 3.1). All of the BCTs required support from others for their delivery; food diaries were the most popular delivery method. Behaviour change techniques are useful to postnatal women who are obese, and have the potential to improve their physical and mental wellbeing. Midwives and obstetricians should be aware of such techniques, to encourage positive changes. © 2015 Royal College of Obstetricians and Gynaecologists.

  8. Combining Infrasound and Imaging Techniques to Characterize and Quantify Eruptive Activity at Karymsky Volcano, Kamchatka, Russia

    Science.gov (United States)

    Fee, D.; Lopez, T. M.; Rowell, C.; Matoza, R. S.; Szuberla, C.; Prata, F.; Firstov, P.; Makhmudov, E.

    2012-12-01

    Changes in atmospheric pressure at volcanic vents caused by the rapid release and expansion of volcanic material (e.g., gas, ash, lava) produce low frequency sound waves known as infrasound. Because of the direct link between the infrasound source and the eruption and emission of volcanic material, complementary direct and remote observations of gas, ash, and other eruptive phenomena can be combined with infrasound measurements to characterize and quantify volcanic activity. Here we present coincident measurements collected over two 10-day periods at Karymsky Volcano in August 2011 and July 2012 of infrasound, SO2, thermal radiation, ash (2011 only), and visual imagery. Infrasound and audible (up to 250 Hz) acoustic data were recorded using arrays of portable digital microphones. SO2 emissions were measured using both a scanning FLYSPEC ultraviolet spectrometer system as well as a CyClops infrared camera equipped with broadband, 8.6, 10, and 11 micron filters permitting detection and quantification of both SO2 and ash. A FLIR infrared camera was utilized to record high temporal resolution thermal observations of the volcanic emissions and hot eruption deposits. Lastly, visual imagery was taken with an HD camcorder. Correlations between this multiparameter dataset allow a better understanding of both the infrasound data and eruptive activity. Karymsky Volcano is one of the most active and dynamic volcanoes in Kamchatka, Russia, with activity during our experiments consisting of vigorous degassing, frequent ash explosions, apparent vent sealing, and intermittent explosive magmatic eruptions. This varied activity produced diverse acoustic and emissions signals. Large explosive eruptions in 2011 are preceded by vent sealing and produce high-amplitude infrasound with occasional visible shock waves. Vigorous gas jetting is also observed and accompanied by elevated SO2 emissions and low infrasound levels. The gas jetting produced clear audible sound (~20-100 Hz) that

  9. Thermal signature analysis of human face during jogging activity using infrared thermography technique

    Science.gov (United States)

    Budiarti, Putria W.; Kusumawardhani, Apriani; Setijono, Heru

    2016-11-01

    Thermal imaging has been widely used for many applications. Thermal camera is used to measure object's temperature above absolute temperature of 0 Kelvin using infrared radiation emitted by the object. Thermal imaging is color mapping taken using false color that represents temperature. Human body is one of the objects that emits infrared radiation. Human infrared radiations vary according to the activity that is being done. Physical activities such as jogging is among ones that is commonly done. Therefore this experiment will investigate the thermal signature profile of jogging activity in human body, especially in the face parts. The results show that the significant increase is found in periorbital area that is near eyes and forehand by the number of 7.5%. Graphical temperature distributions show that all region, eyes, nose, cheeks, and chin at the temperature of 28.5 - 30.2°C the pixel area tends to be constant since it is the surrounding temperature. At the temperature of 30.2 - 34.7°C the pixel area tends to increase, while at the temperature of 34.7 - 37.1°C the pixel area tends to decrease because pixels at temperature of 34.7 - 37.1°C after jogging activity change into temperature of 30.2 - 34.7°C so that the pixel area increases. The trendline of jogging activity during 10 minutes period also shows the increasing of temperature. The results of each person also show variations due to physiological nature of each person, such as sweat production during physical activities.

  10. Improvement Of The Absolute Activity Determination Technique Of '125I In The Thyroid

    International Nuclear Information System (INIS)

    Pelled, O.; German, U.; Alfassi, Z.

    1999-01-01

    A method for absolute determination of the activity of a 125 I source based on the counting rate values of the 27 keV photons and the 54 keV coincidence photo-peak is given in the literature. We had shown in previous works, that this method, within certain limitations, diminishes the geometry dependence of the activity determination for 125 I sources and for measuring the uptake of 125 I in human thyroid. In the present work we present a farther improvement of the accuracy of the absolute determination method

  11. An overview of Test Techniques for Characterizing Active Phased Array Antennas

    NARCIS (Netherlands)

    Keizer, W.P.M.N.

    1999-01-01

    In this paper a review will be given of the microwave testing of active phased anay antennas. It will be shown that due to the application of Transmit/Receive (T/R) modules in such antennas considerable more tests have to be performed to characterise completely their microwave performance than for

  12. Comparison of Fractionation Techniques of CO2 Extracts from Eucalyptus Globulus - Composition and Insecticidal Activity

    Czech Academy of Sciences Publication Activity Database

    Topiař, Martin; Sajfrtová, Marie; Pavela, R.; Machalová, Zdeňka

    2015-01-01

    Roč. 97, FEB 2015 (2015), s. 202-210 ISSN 0896-8446 R&D Projects: GA TA ČR TA01010578 Institutional support: RVO:67985858 Keywords : supercritical fractinacion * eucalyptus globulus * insecticidal activity Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 2.579, year: 2015

  13. Linear and Non-Linear Control Techniques Applied to Actively Lubricated Journal Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2003-01-01

    The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication. For furt......The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication....... For further reduction of shaft vibrations one can count with the active lubrication action, which is based on injecting pressurised oil into the bearing gap through orifices machined in the bearing sliding surface. The design and efficiency of some linear (PD, PI and PID) and non-linear controllers, applied...... vibration reduction of unbalance response of a rigid rotor, where the PD and the non-linear P controllers show better performance for the frequency range of study (0 to 80 Hz). The feasibility of eliminating rotor-bearing instabilities (phenomena of whirl) by using active lubrication is also investigated...

  14. Active Feedback Technique for RF Channel Selection in Front-End Receivers

    NARCIS (Netherlands)

    Youssef, S.S.T.; van der Zee, Ronan A.R.; Nauta, Bram

    2012-01-01

    Co-existence problems in a mobile terminal environment pose strict requirements on the linearity of a front-end receiver. In this paper, active feedback is explored as a means to relax such requirements by providing channel selectivity as early as possible in the receiver chain. The proposed

  15. Teaching Grammar for Active Use: A Framework for Comparison of Three Instructional Techniques

    Science.gov (United States)

    Baleghizadeh, Sasan; Oladrostam, Elnaz

    2011-01-01

    Teaching grammar in a way that enables students to use grammatical structures correctly in their active use has always been one of the intricate tasks for most practitioners. This study compared the effectiveness of three instructional methods: games, dialogues practiced through role-play, and unfocused tasks for teaching grammar. Forty-eight…

  16. Remote sensing techniques to assess active fire characteristics and post-fire effects

    Science.gov (United States)

    Leigh B. Lentile; Zachary A. Holden; Alistair M. S. Smith; Michael J. Falkowski; Andrew T. Hudak; Penelope Morgan; Sarah A. Lewis; Paul E. Gessler; Nate C. Benson

    2006-01-01

    Space and airborne sensors have been used to map area burned, assess characteristics of active fires, and characterize post-fire ecological effects. Confusion about fire intensity, fire severity, burn severity, and related terms can result in the potential misuse of the inferred information by land managers and remote sensing practitioners who require unambiguous...

  17. Feasibility of activation techniques for neutron measurements in the NET-blanket

    International Nuclear Information System (INIS)

    Bertalot, L.; Pillon, M.

    1987-07-01

    A feasibility study has been carried out on the diagnostical possibilities offered by local activation probes of measuring the neutron fluxes, fluences and energy spectra in various locations inside the NET (Next European Tours) device. Three sets of 12 candidate materials/reactions have been selected for the first wall, outboard blanket, and outboard shield positions for irradiation within a single plasma discharge

  18. Nondestructive control of chemical weapons combining neutron-activation analysis and neutron-radiography techniques

    Science.gov (United States)

    Bach, Pierre; Cluzeau, S.; Le Tourneur, P.; Jaureguy, J. C.; Guir, F.

    1995-03-01

    A project of a transportable neutron system has been designed for nondestructive detection of weapon materials such as chemical agents or explosives. The system combines imaging and identifying techniques, and uses a sealed tube neutron generator GENIE 46. The neutron emitting module is embedded in a moderator/collimator. The resulting mixed 14 MeV and thermal neutron beam allows the user to perform neutron radiography and gamma-ray spectroscopy. Substances to be detected are imaged in a first step and then identified by comparing relative spectral line intensities with those of reference materials. The moderator provides a first level protection against radiation to the operators. This project includes only industrial sub assemblies, transportable by truck to be used in open area.

  19. The Thoron Issue: Monitoring Activities, Measuring Techniques and Dose Conversion Factors (invited paper)

    International Nuclear Information System (INIS)

    Nuccetelli, C.; Bochicchio, F.

    1998-01-01

    The health risk due to the presence of thoron indoors is usually neglected because of its generally low concentration in indoor environments, which is essentially caused by its short half-life. However, in certain not uncommon situations, such as when thorium-rich building materials are used, thoron ( 220 Rn) may represent a significant source of radioactive exposure. In recent years, renewed interest has led to more intensive monitoring of thoron gas and its decay products. A tentatively comprehensive summary of these measurement results and a review of the most innovative measurement techniques for 220 Rn are here presented. Finally, dose-exposure conversion factors currently used for thoron decay products are analysed, highlighting the poorer basis of such factors, when compared to those for radon. (author)

  20. Recent activities on nuclear and electron density study by diffraction technique

    International Nuclear Information System (INIS)

    Noda, Yukio

    2005-01-01

    Advanced structure analysis is to know the detail structures in a crystal as atomic and electronic level and also to know the relation between the crystal structure and physical properties of the material. In this talk, I will emphasize the importance of the role of neutron single crystal experiments. As one of the examples, the comparison of electron density observed by x-ray crystal structure analysis and nuclear distribution observed by neutron structure analysis, especially in the hydrogen bond system, will be given. As a result, we found a large electronic polarization in a hydrogen atom, which plays an important role for the antiferroelectric phase transition. Other examples are the direct measurements of d-electron orbital using neutron magnetic structure analyses. MnF 2 (d 5 ) and Nd 2 CuO 4 (d 1 ) are examples. Finally, a π-electron distribution in an organic crystal using the similar technique will be shown

  1. A Simple Technique for Sustaining Solar Energy Production in Active Convective Coastal Regions

    Directory of Open Access Journals (Sweden)

    Moses E. Emetere

    2016-01-01

    Full Text Available The climatic factors in the coastal areas are cogent in planning a stable and functional solar farm. 3D simulations relating the surface temperature, sunshine hour, and solar irradiance were adopted to see the effect of minute changes of other meteorological parameters on solar irradiance. This enabled the day-to-day solar radiation monitoring with the primary objective to examine the best technique for maximum power generation via solar option in coastal locations. The month of January had the highest turbulent features, showing the influence of weather and the poorest solar radiance due to low sunshine hour. Twenty-year weather parameters in the research area were simulated to express the systematic influence of weather of PV performance. A theoretical solar farm was illustrated to generate stable power supply with emphasis on the longevity of the PV module proposed by introducing an electronic concentrator pillar (CP. The pictorial and operational model of the solar farm was adequately explained.

  2. Inversion of SAR data in active volcanic areas by optimization techniques

    Directory of Open Access Journals (Sweden)

    G. Nunnari

    2005-01-01

    Full Text Available The inversion problem concerns the identification of parameters of a volcanic source causing observable changes in ground deformation data recorded in volcanic areas. In particular, this paper deals with the inversion of ground deformation measured by using SAR (Synthetic Aperture Radar interferometry and an inversion approach formulated in terms of an optimization problem is proposed. Based on this inversion scheme, it is shown that the problem of inverting ground deformation data in terms of a single source, of Mogi or Okada type, is numerically well conditioned. In the paper, two case studies of inverting actual SAR data recorded on Mt. Etna during eruptions occurring in 1998 and 2001 are investigated, showing the suitability of the proposed technique.

  3. Evaluation of different magnetic resonance imaging techniques for the assessment of active left atrial emptying

    Energy Technology Data Exchange (ETDEWEB)

    Muellerleile, Kai; Steven, Daniel; Sultan, Arian; Drewitz, Imke; Hoffmann, Boris; Lueker, Jakob; Willems, Stephan; Rostock, Thomas [University Medical Center Hamburg-Eppendorf, Department of Cardiology, Electrophysiology, Center for Cardiology and Cardiovascular Surgery, Hamburg (Germany); Groth, Michael; Adam, Gerhard; Lund, Gunnar K. [University Medical Center Hamburg-Eppendorf, Department of Diagnostic and Interventional Radiology, Hamburg (Germany); Saring, Dennis [University Medical Center Hamburg-Eppendorf, Department of Medical Informatics, Hamburg (Germany)

    2012-09-15

    There is currently no agreement on the best method of assessing active left atrial (LA) emptying. This study evaluated the relative merits of cine- and velocity encoded (VENC) magnetic resonance imaging (MRI) for the assessment of active LA emptying. Total LA emptying volume (TLAEV) and active LA stroke volume (ALASV) were assessed in 107 consecutive patients using cine-MRI and transmitral flow measurements by VENC-MRI. The fraction of active LA emptying (ALAEF) was calculated as the ratio of ALASV to TLAEV. LA and left ventricular (LV) output were calculated by multiplying TLAEV and LV stroke volume by heart rate, respectively. Intra- and inter-observer variances were significantly larger for cine-MRI than for VENC-MRI measurements of ALASV (24.7 mL{sup 2} vs. 3.7 mL{sup 2} and 57.7 mL{sup 2} vs. 4.2 mL{sup 2}; P < 0.0001). Biplane cine-MRI underestimated TLAEV (mean difference -57 {+-} 32 %; P < 0.0001) and ALASV (mean difference -24 {+-} 51 %; P < 0.0001) but overestimated ALAEF (mean difference 31 {+-} 54 %, P < 0.0001) compared with VENC-MRI. There was significantly better agreement between LV output and LA output measured by VENC-MRI compared with LA output measured by cine-MRI (mean difference 0.30 {+-} 1.12 L/min vs. -2.05 {+-} 1.44 L/min; P < 0.0001). VENC-MRI is the more appropriate method of assessing active LA emptying and its use should be favoured. (orig.)

  4. Effect of drying techniques on the retention of antioxidant activities of Saskatoon berries

    Directory of Open Access Journals (Sweden)

    Pranabendu Mitra

    2013-10-01

    Full Text Available The main objective of this research was to compare the retention of antioxidant activity and total anthocyanin content of Saskatoon berries dried by freeze drying, microwave-vacuum drying, thin layer hot air drying and vacuum drying. Antioxidant activity of berry samples was determined by DPPH radical scavenging and ABTS radical scavenging, and the pH differential method was used to determine total anthocyanin content of the berry samples. The results showed that the freeze dried Saskatoon berries exhibited the highest retention of anthocyanin and antioxidant activity among the dried samples, followed by microwave-vacuum dried berries, thin layer hot air dried berries and vacuum dried berries. There were significant differences between the berry samples at P<0.05.  DPPH radical scavenging and ABTS radical scavenging were correlated linearly with an R2 value of 0.99 at P<0.05 showing their effectiveness for the determination of the antioxidant activity of the Saskatoon berries. However, the DPPH radical scavenging assay was more effective than the ABTS radical scavenging assay. The results also showed that antioxidant activity of the berries was highly correlated with the total anthocyanin content of the fruit. The reduction of anthocyanin in dried berry samples was linearly correlated with the reduction of DPPH radical scavenging with an R2 value of 0.97 at P<0.05 and, also, linearly correlated with the reduction of ABTS radical scavenging with an R2 value of 0.88 at P<0.05.

  5. Non-target activity detection by post-radioembolization yttrium-90 PET/CT: Image assessment technique and case examples

    Directory of Open Access Journals (Sweden)

    Yung Hsiang eKao

    2014-02-01

    Full Text Available High-resolution yttrium-90 (90Y imaging of post-radioembolization microsphere biodistribution may be achieved by conventional positron emission tomography with integrated computed tomography (PET/CT scanners that have time-of-flight capability. However, reconstructed 90Y PET/CT images have high background noise, making non-target activity detection technically challenging. This educational article describes our image assessment technique for non-target activity detection by 90Y PET/CT which qualitatively overcomes the problem of background noise. We present selected case examples of non-target activity in untargeted liver, stomach, gallbladder, chest wall and kidney, supported by angiography and 90Y bremsstrahlung single photon emission computed tomography with integrated computed tomography (SPECT/CT or technetium-99m macroaggregated albumin SPECT/CT.

  6. P contribution derived from phosphate solubilizing microorganism activity, rock phosphate and SP-36 determination by isotope 32P technique

    International Nuclear Information System (INIS)

    Anggi Nico Flatian; Iswandi Anas; Atang Sutandi; Ishak

    2016-01-01

    The 32 P isotope technique has been used to trace P nutrients in the soil and soil-plant systems. The use of the isotope 32 P has made it possible to differentiate the P contribution derived from phosphate solubilizing microorganism activity and the fertilizer P in the soil. The aims of the study were to obtain the quantitative data of P contribution derived from phosphate-solubilizing microorganism activity (Aspergillus niger and Burkholderia cepacia), rock phosphate and SP-36 through P uptake by the plants using isotope 32 P technique and also to study the effects on growth and production of corn plants. The results were showed that phosphate-solubilizing microorganism, rock phosphate and SP-36 was produced specific activity ( 32 P) lower than control. The results were indicated that all treatments could contribute P for the plants. The lower specific activity was caused by supply P from rock phosphate and SP-36, and also was caused by solubilized of unavailable 31 P from PSM activity, which decreased specific activity on labeled soil. The combination of phosphate-solubilizing microorganism and SP-36 treatments produced the highest P contribution, significantly higher than control and SP-36 only. Phosphate derived from combination of microorganism and SP-36 treatments ranging from 56.06% - 68.54% after 50 days planting, after 35 days planting, 51.96% - 59.65% on stover, 46.33% - 47.70% on grain and 53.02% - 59.87% on corn cob. In addition, the treatments could significantly support the plant growth and yield. It is expressed by increased number of leave at 35 days after planting, dry weight of leave at 35 days after planting and dry weight of grain. (author)

  7. Normal coordinate analysis and fungicidal activity study on anilazine and its related compound using spectroscopic techniques

    Science.gov (United States)

    Sheeja Mol, Gilbert Pushpam; Arul Dhas, Deva Dhas; Hubert Joe, Isaac; Balachandran, Sreedharan

    2016-06-01

    The FTIR and FT-Raman spectra of anilazine have been recorded in the range 400-4000 cm-1 and 50-3500 cm-1 respectively. The optimized geometrical parameters of the compound were calculated using B3LYP method with 6-311G(d,p) basis set. The distribution of the vibrational bands were carried out with the help of normal coordinate analysis (NCA). The 1H and 13C nuclear spectra have been recorded and chemical shifts of the molecule were also calculated using the gauge independent atomic orbital (GIAO) method. The UV-Visible spectrum of the compound was recorded in the region 190-900 nm and the electronic properties were determined by time-dependent DFT (TD-DFT) approach. Anilazine was screened for its antifungal activity. Molecular docking studies are conducted to predict its fungicidal activity.

  8. Neutron activation analysis as a tracer technique for evaluating sample dissolution methods

    International Nuclear Information System (INIS)

    Porritt, P.M.; Porritt, R.E.J.

    1978-01-01

    The usefulness of neutron activation analysis for monitoring sample dissolution methods has been demonstrated. Lanthanum was determined in the USGS standard rock GSP-1 by instrumental neutron activation analysis to provide a reference figure. When an irradiated sample of GSP-1 was sintered with sodium peroxide and the sinter cake washed with water, all the lanthanum-140 could be dissolved in dilute hydrochloric acid. Heating an irradiated sample of GSP-1 with a mixture of hydrofluoric acid, nitric acid and perchloric acid and evaporating to fumes of perchloric acid dissolved only 80% of the lanthanum-140. However, evaporation to dryness, addition of perchloric acid and reevaporation to dryness rendered all the lanthanum-140 soluble

  9. Laser-ablated active doping technique for visible spectroscopy measurements on Z.

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Matthew Robert

    2013-09-01

    Visible spectroscopy is a powerful diagnostic, allowing plasma parameters ranging from temperature and density to electric and magnetic fields to be measured. Spectroscopic dopants are commonly introduced to make these measurements. On Z, dopants are introduced passively (i.e. a salt deposited on a current-carrying surface); however, in some cases, passive doping can limit the times and locations at which measurements can be made. Active doping utilizes an auxiliary energy source to disperse the dopant independently from the rest of the experiment. The objective of this LDRD project was to explore laser ablation as a method of actively introducing spectroscopic dopants. Ideally, the laser energy would be delivered to the dopant via fiber optic, which would eliminate the need for time-intensive laser alignments in the Z chamber. Experiments conducted in a light lab to assess the feasibility of fibercoupled and open-beam laser-ablated doping are discussed.

  10. A Modified Technique of Active Power Measurement for Industrial Frequency Applications

    Directory of Open Access Journals (Sweden)

    Satish Chandra BERA

    2010-08-01

    Full Text Available Measurement of electric power and energy is very important aspect in any electrical application. A very simple design of measurement of active power for industrial frequency application is described in the paper. In this design a light emitting diode and light dependent resistor based electronic circuit has been fabricated to measure active power in terms of the DC output voltage of the circuit. Theoretical equations have been derived to find a linear relation between the DC output voltage and input power. The whole unit has been designed, fabricated and experimentally tested. The experimental results are reported in the paper and are found to follow the theoretical equations. It has been observed that the analog DC output voltage of the proposed circuit is linearly related with the power within tolerable limit.

  11. Determination of alpha activity produced by Indian tea samples using solid state nuclear track detection technique

    International Nuclear Information System (INIS)

    Azam, Ameer; Naqvi, A.H.; Srivastava, D.S.

    2001-01-01

    India has first place in the world in the production, consumption and export of tea. The average production of tea in India is about 780 million kg annually. Indian population uses tea as a favourite beverage specially with the breakfast. Tea leaves are perennial plants and they have extension root system spread over deeper layers in the soil. Soil contains uranium as trace element. Hence, uranium is transferred to the leaves as a result of uptake from the soil over the years. Since many of the decay products of uranium are alpha emitters hence tea is a source of alpha radioactivity and can cause damaging effects. Therefore, data on alpha activity of tea samples will be useful in estimating these harmful effects at least qualitatively. In the present study the alpha activity produced by thirteen samples of tea available in the local market was measured

  12. Linear and Non-Linear Control Techniques Applied to Actively Lubricated Journal Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2003-01-01

    The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication....... For further reduction of shaft vibrations one can count with the active lubrication action, which is based on injecting pressurised oil into the bearing gap through orifices machined in the bearing sliding surface. The design and efficiency of some linear (PD, PI and PID) and non-linear controllers, applied...... to a tilting-pad journal bearing, are analysed and discussed. Important conclusions about the application of integral controllers, responsible for changing the rotor-bearing equilibrium position and consequently the "passive" oil film damping coefficients, are achieved. Numerical results show an effective...

  13. Performance of flowing sample neutron activation analysis technique for determination of multi-elemental content

    International Nuclear Information System (INIS)

    Mohamed Soliman; Mohamed, N.M.A.; Osman, A.M.; Abdel-Monem, A.M.

    2014-01-01

    In order to measure and obtain reliable data about elements via measuring of short-lived isotopes in liquid samples using neutron activation analysis, experiments have been carried out using a flowing sample neutron activation analysis method. During this work the performance and reliability for the proposed method have been tested using synthetic multi elements liquid samples. The radionuclide, associated elements and their concentration level have been measured using a counting system with a fixed dead-time. An HPGe spectrometry system was used to determine the most important γ-ray energies and intensities of these isotopes. The obtained results demonstrated the reliability and accuracy (bias <5 % and zeta score <2) of the tested method for determination the elemental content of liquid samples. (author)

  14. Validation of computational methods for treatment planning of fast-neutron therapy using activation foil techniques

    International Nuclear Information System (INIS)

    Nigg, D.W.; Wemple, C.A.; Hartwell, J.K.; Harker, Y.D.; Venhuizen, J.R.; Risler, R.

    1997-12-01

    A closed-form direct method for unfolding neutron spectra from foil activation data is presented. The method is applied to measurements of the free-field neutron spectrum produced by the proton-cyclotron-based fast-neutron radiotherapy facility at the University of Washington (UW) School of Medicine. The results compare favorably with theoretical expectations based on an a-priori calculational model of the target and neutron beamline configuration of the UW facility

  15. Optimization of the indirect at neutron activation technique for the determination of boron in aqueous solutions

    International Nuclear Information System (INIS)

    Luz, L.C.Q.P. da.

    1984-01-01

    The purpose of this work was the development of an instrumental method for the optimization of the indirect neutron activation analysis of boron in aqueous solutions. The optimization took into account the analytical parameters under laboratory conditions: activation carried out with a 241 Am/Be neutron source and detection of the activity induced in vanadium with two NaI(Tl) gamma spectrometers. A calibration curve was thus obtained for a concentration range of 0 to 5000 ppm B. Later on, experimental models were built in order to study the feasibility of automation. The analysis of boron was finally performed, under the previously established conditions, with an automated system comprising the operations of transport, irradiation and counting. An improvement in the quality of the analysis was observed, with boron concentrations as low as 5 ppm being determined with a precision level better than 0.4%. The experimental model features all basic design elements for an automated device for the analysis of boron in agueous solutions wherever this is required, as in the operation of nuclear reactors. (Author) [pt

  16. Effects of the active hold-off technique in 1.55-μm single-photon detection

    International Nuclear Information System (INIS)

    Bouzid, Abdessattar; Park, Junbum; Moon, Sung

    2010-01-01

    We investigate the effects of the active hold-off technique in single-photon detector (SPD) based on InGaAs/InP avalanche photodiodes (APDs). The concept of this technique is to hold-off an appropriate number of gate pulses after each recorded detection in order to wait for the trapping levels to empty. We found that at almost a 1-MHz repetition rate of the gate, such a hold-off mechanism must block at least two gate pulses after each photon click event to reduce the after-pulsing effect and does not significantly affect the count probability per gate. For higher repetition frequencies, the number of hold-off gates must be increased.

  17. Synthesis of crystalline Ce-activated garnet phosphor powders and technique to characterize their scintillation light yield

    Science.gov (United States)

    Gordienko, E.; Fedorov, A.; Radiuk, E.; Mechinsky, V.; Dosovitskiy, G.; Vashchenkova, E.; Kuznetsova, D.; Retivov, V.; Dosovitskiy, A.; Korjik, M.; Sandu, R.

    2018-04-01

    This work reports on a process of preparation of garnet phosphor powders and a technique for light yield evaluation of strongly light scattering samples. Powders of scintillation compounds could be used as individual materials or as samples for express tests of scintillation properties. However, estimation of their light yield (LY) is complicated by strong light scattering of this kind of materials. Ce3+-activated yttrium-aluminum and gallium-gadolinium-aluminum garnet phosphor powders, Y3Al5O12 (YAG:Ce) and Gd3Ga3Al2O12 (GGAG:Ce), were obtained using a modified coprecipitation technique. Ga tends to residue in mother liquor in ammonia media, but the modification allows to avoid the loss of components. We propose an approach for sample preparation and LY measurement setup with alpha particles excitation, allowing to decrease light scattering influence and to estimate a light yield of powder samples. This approach is used to evaluate the obtained powders.

  18. Understanding neighborhood environment related to Hong Kong children's physical activity: a qualitative study using nominal group technique.

    Directory of Open Access Journals (Sweden)

    Gang He

    Full Text Available BACKGROUND: Relationships between the neighborhood environment and children's physical activity have been well documented in Western countries but are less investigated in ultra-dense Asian cities. The aim of this study was to identify the environmental facilitators and barriers of physical activity behaviors among Hong Kong Chinese children using nominal group technique. METHODS: Five nominal groups were conducted among 34 children aged 10-11 years from four types of neighborhoods varying in socio-economic status and walkability in Hong Kong. Environmental factors were generated by children in response to the question "What neighborhood environments do you think would increase or decrease your willingness to do physical activity?" Factors were prioritized in order of their importance to children's physical activity. RESULTS: Sixteen unique environmental factors, which were perceived as the most important to children's physical activity, were identified. Factors perceived as physical activity-facilitators included "Sufficient lighting", "Bridge or tunnel", "Few cars on roads", "Convenient transportation", "Subway station", "Recreation grounds", "Shopping malls with air conditioning", "Fresh air", "Interesting animals", and "Perfume shop". Factors perceived as physical activity-barriers included "People who make me feel unsafe", "Crimes nearby", "Afraid of being taken or hurt at night", "Hard to find toilet in shopping mall", "Too much noise", and "Too many people in recreation grounds". CONCLUSIONS: Specific physical activity-related environmental facilitators and barriers, which are unique in an ultra-dense city, were identified by Hong Kong children. These initial findings can inform future examinations of the physical activity-environment relationship among children in Hong Kong and similar Asian cities.

  19. Passive and active correlation techniques for the detection of nuclear materials

    International Nuclear Information System (INIS)

    Deyglun, Clement; Carasco, Cedric; Perot, Bertrand; Eleon, Cyrille; Sannie, Guillaume; Boudergui, Karim; Corre, Gwenole; Konzdrasovs, Vladimir; Pras, Philippe

    2013-06-01

    In the frame of the French trans-governmental R and D program against CBRN-E threats, CEA (French Alternative Energies and Atomic Energy Commission) is studying the detection of Special Nuclear Materials (SNM) by neutron interrogation with the Associated Particle Technique (APT). Coincidences including at least 3 fission neutrons or gamma rays induced by tagged neutrons are used to detect and distinguish SNM from benign materials in which lower multiplicity events of 1 or 2 particles are produced by (n, 2n) or (n, n'γ) reactions. Coincidence are detected by fast plastic scintillators and correlated with tagged neutrons to improve the signal-to-noise ratio. Dedicated data acquisition electronics (DAQ) has been developed with independent FPGA cards associated to each detector, so that the acquisition window can be opened by any of the plastic scintillators. DAQ tests in passive mode are presented, in which acquisition is triggered by the sum signal of all detectors. The system time and energy calibration and resolution are reported, as well as the qualification of numerical simulations thanks to experimental data acquired with simple setups using a 252 Cf source. Numerical studies for the design and performance of cargo container inspection are also performed with the MCNP-PoliMi computer code and the ROOT data analysis package. SNM detection in iron cargo is quite straightforward but in organic matrix, data processing will need to combine more information to evidence SNM. (authors)

  20. Comparison of techniques active and passive in measurement of radon concentration (222Ra) in the air

    International Nuclear Information System (INIS)

    Oliveira, Evaldo Paulo de

    2017-01-01

    The purpose of this work was to perform a study comparing radon concentration measurements between two techniques used to measure radon gas in the air: one using LEXAN polycarbonate plastic detectors and the other the continuous monitor in AlphaGUARD passive mode. The concentrations of radon gas within radon emanation chambers were measured using calibrated / traceable sources generating 222 Rn through 226 Ra. In calibration the 'calibration factor' or 'sensitivity' was determined for the LEXAN plastic detector. The calibration work of the dosimeters was carried out at the Radon Laboratory of the Environmental Analysis Division - DIRAD IRD/CNEN and at the Natural Radioactivity Laboratory (LRN) of the Center for the Development of Nuclear Technology (CDTN/CNEN). The 'calibration factor' or 'sensitivity' was found to be 32.34 (traits.cm -2 )/(kBq.d.m -3 ). This factor was used to determine the radon concentration measured by the LEXAN plastic detectors. Also in the calibration, the efficiencies for LEXAN (94.1% ± 9.7%) and AlphaGUARD (92.5% ± 7.2%) were determined. The statistical analysis used showed good parity in the results of the measurements. It was concluded that the results were satisfactory and will serve as a good reference for studies related to the radon air meters used in this work. (author)

  1. Pressure modulation, a new dynamic technique for the electrochemical determination of adsorption, reaction and activation volumes.

    Science.gov (United States)

    Loewe, T; Baltruschat, H

    2005-01-21

    A new dynamic method for the measurement of pressure dependent kinetic and thermodynamic quantities is described and its successful operation demonstrated for two example systems. The pressure was modulated with an amplitude of only +/-1 bar or less by means of a piezo-transducer. The small effect on the reaction rate, potential or charge of the electrode can be detected using the lock in technique. The determination of the reaction volume of the redox couple Fe(CN)6(4-)/Fe(CN)6(3-) served as a control of the validity of the measurement and the reliability of the experimental approach. As a first model system the adsorption of hydrogen on polycrystalline Pt was studied. A volume of adsorption of 4.8 cm3 mol(-1) was found. The partial molar volume for protons in water (upsilon+ = -5.4 cm3 mol(-)) measured by Zana and Yeager, J. Phys. Chem., 1967, 71, 521-536, was used to establish that the partial molar volume of the adsorbed hydrogen was close to zero.

  2. Optical waveguide lightmode spectroscopic techniques for investigating membrane-bound ion channel activities.

    Directory of Open Access Journals (Sweden)

    Inna Székács

    Full Text Available Optical waveguide lightmode spectroscopic (OWLS techniques were probed for monitoring ion permeation through channels incorporated into artificial lipid environment. A novel sensor set-up was developed by depositing liposomes or cell-derived membrane fragments onto hydrophilic polytetrafluoroethylene (PTFE membrane. The fibrous material of PTFE membrane could entrap lipoid vesicles and the water-filled pores provided environment for the hydrophilic domains of lipid-embedded proteins. The sensor surface was kept clean from the lipid holder PTFE membrane by a water- and ion-permeable polyethylene terephthalate (PET mesh. The sensor set-up was tested with egg yolk lecithin liposomes containing gramicidin ion channels and with cell-derived membrane fragments enriched in GABA-gated anion channels. The method allowed monitoring the move of Na(+ and organic cations through gramicidin channels and detecting the Cl(--channel functions of the (α5β2γ2 GABAA receptor in the presence or absence of GABA and the competitive GABA-blocker bicuculline.

  3. Reproduction in chinchilla (Chinchilla lanigera): current status of environmental control of gonadal activity and advances in reproductive techniques.

    Science.gov (United States)

    Busso, J M; Ponzio, M F; Fiol de Cuneo, M; Ruiz, R D

    2012-07-01

    A review of the biology of reproduction of chinchilla, focusing on environmental control of the gonadal activity, is presented. Chinchilla is a South American hystricomorph rodent genus currently considered almost extinct in the wild. However, a domestic form is still widespread in breeding farms around the world. Information regarding their reproductive biology has been obtained from studies on captive animals. In the case of Chinchilla lanigera, a seasonal reproductive pattern has been frequently reported in breeding facilities, but factors that might trigger gonadal activity have not been identified. The available information on reproductive productivity in farms worldwide shows a range of 1.2 to 2.4 deliveries per female per yr (with up to 2.1 weaned young per female per yr). Indeed, as found in all rodents, chinchillas can multiply at high fecundity and fertility rates (4 to 6 follicles mature during estrous cycles). Some new research avenues are postulated to improve the control of gonadal activity by means of environmental and/or pharmacologic factors. Furthermore, reproductive techniques that have been validated in chinchilla are reviewed (noninvasive hormone monitoring, semen collection, sperm cryopreservation, estrus induction), and several technical steps are proposed to be able to achieve AI. Because domesticated chinchilla still share some genomic characteristics with their counterparts in the wild, validated reproductive techniques in chinchilla males and females might contribute to the success of breeding programs. Copyright © 2012 Elsevier Inc. All rights reserved.

  4. A Study on an Executive Technique and Activation of Clean Production in Chemical Industry

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Seong Yong; Lee, Hee Seok; Kim, Kang Seok [Korea Environment Institute, Seoul (Korea)

    2000-12-01

    Clean production does not only make the sustainable development possible through preventing the deterioration of the environmental pollution from the expansion of industrialization but also enhance the company's competitiveness. Clean production is required by all industrial fields but is the most important in chemical industry. The Government has made efforts to change the domestic industrial structure to the environmental-friendly structure through developing the research. However, the domestic industry has not yet activated overall except some large companies, which has concretized the activation of clean production. Especially, the medium and small companies are more sluggish due to the inferiority of capital and technology. With recognizing that the main body of clean production is a company, the effort based on the Government and the academic world, without companies' positive, will cannot help being limited in effects. Therefore, it is necessary to trigger the schemes that urge the companies' motivation to show the effects from the support that have concentrated in hardware like technology until now. It seems to be very important that the guidebook for clean production, which a company can easily adopt, is developed and spread. This report provides the guidebook for clean production that managers and engineers can easily understand and approach in a producing field and presents the scheme to promote clean production, for chemical industry that is seriously required clean production. Even if the presented contents are not perfect, they can be applied to the development of the Government's policy and the administrative activities of companies for clean production as a useful data. 53 refs., 5 figs., 30 tabs.

  5. Feasibility of calibration of liquid sodium flowmeters by neutron activation techniques

    International Nuclear Information System (INIS)

    Kehler, P.

    1976-07-01

    Velocities of fluids in pipes can be measured by injecting radioactive tracers into the fluid and recording the activity downstream of the injection point. One convenient method of injecting radioactive tracers is by neutron activation of the fluid itself. The present report describes a FORTRAN program that can be used for the prediction of the counting rates of fluid flow tests performed with a pulsed neutron source and a scintillation detector. The program models the flow profile and the mixing of the fluid, the attenuation of neutrons and gamma rays in the fluid, and the geometric arrangement of the source and the detector. Using this program, an experiment for the measurement of the secondary sodium flow of the EBR-II was optimized. A pulsed D,T neutron source and a 5 in. x 5 in. NaI detector will be used in the EBR-II test. Under optimized conditions, the expected accuracy of the flow measurement is about 2 percent

  6. Joining techniques for a reduced activation 12Cr steel for inertial fusion energy

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, R. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); El-Dasher, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Choi, B. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Torres, S. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-10-01

    At Lawrence Livermore National Laboratory, we are developing a reduced activation ferritic martensitic steel that is based on the ferritic martensitic steel HT-9. As a part of the development of this steel, we tested a series of welding processes for characterization, including conventional welds (electron beam, tungsten inert gas, and laser) as well as solid-state welds (hot isostatic pressing). We also heat treated the joints at various temperatures between 750 °C and 1050 °C to find a suitable normalization scheme. The modified HT-9 reduced activation ferritic martensitic steel appears highly suitable to welding and diffusion bonding. All welds showed good quality fusion zones with insignificant cracking or porosity. Additionally, a heat treatment schedule of 950 °C for one hour caused minimal grain growth while still converging the hardness of the base metal with that of the fusion and heat-affected zones. Also, modified HT-9 diffusion bonds that were created at temperatures of at least 950 °C for two hours at 103 MPa had interface tensile strengths of greater than 600 MPa. The diffusion bonds showed no evidence of increased hardness nor void formation at the diffusion bonded interface.

  7. Behavioural sampling techniques and activity pattern of Indian Pangolin Manis crassicaudata (Mammalia: Manidae in captivity

    Directory of Open Access Journals (Sweden)

    R.K. Mohapatra

    2013-12-01

    Full Text Available The study presents data on six Indian Pangolins Manis crassicaudata observed in captivity at the Pangolin Conservation Breeding Centre, Nandankanan, Odisha, India over 1377 hours of video recordings for each pangolin between 1500hr and 0800hr on 81 consecutive observational days. Video recordings were made through digital systems assisted by infrared enabled CCTV cameras. The data highlights patterns relate to 12 different behaviour and enclosure utilization. Different interval periods for sampling of instantaneous behaviour from video recordings have been evaluated to develop optimal study methods for the future. The activity budgets of pangolins displayed natural patterns of nocturnal activity with a peak between 20:00-21:00 hr. When out of their burrow, they spent about 59% of the time walking in the enclosure, and 14% of the time feeding. The repeatability of the behaviours has a significant negative correlation with the mean time spent in that behaviour. Focal behavioural samples significantly correlated with instantaneous samples up to 15 minutes interval. The correlation values gradually decreased with the increase in sampling interval. The results indicate that results obtained from focal sampling and instantaneous sampling with relatively shorter intervals (=5 minutes are about equally reliable. The study suggests use of focal sampling, instead of instantaneous sampling to record behaviour relating to social interactions.

  8. A New Technique to Observe ENSO Activity via Ground-Based GPS Receivers

    Science.gov (United States)

    Suparta, Wayan; Iskandar, Ahmad; Singh, Mandeep Singh Jit

    In an attempt to study the effects of global climate change in the tropics for improving global climate model, this paper aims to detect the ENSO events, especially El Nino phase by using ground-based GPS receivers. Precipitable water vapor (PWV) obtained from the Global Positioning System (GPS) Meteorology measurements in line with the sea surface temperature anomaly (SSTa) are used to connect their response to El Niño activity. The data gathered from four selected stations over the Southeast Asia, namely PIMO (Philippines), KUAL (Malaysia), NTUS (Singapore) and BAKO (Indonesia) for the year of 2009/2010 were processed. A strong correlation was observed for PIMO station with a correlation coefficient of -0.90, significantly at the 99 % confidence level. In general, the relationship between GPS PWV and SSTa at all stations on a weekly basis showed with a negative correlation. The negative correlation indicates that during the El Niño event, the PWV variation was in decreased trend. Decreased trend of PWV value is caused by a dry season that affected the GPS signals in the ocean-atmospheric coupling. Based on these promising results, we can propose that the ground-based GPS receiver is capable used to monitor ENSO activity and this is a new prospective method that previously unexplored.

  9. Modified thresholding technique of MMSPCA for extracting respiratory activity from short length PPG signal.

    Science.gov (United States)

    Motin, Mohammod Abdul; Karmakar, Chandan Kumar; Palaniswami, Marimuthu

    2017-07-01

    In this paper, we propose an automatic threshold selection of modified multi scale principal component analysis (MMSPCA) for reliable extraction of respiratory activity (RA) from short length photoplethysmographic (PPG) signals. MMSPCA was applied to the PPG signal with a varying data length, from 30 seconds to 60 seconds, to extract the respiratory activity. To examine the performance, we used 100 epochs of simultaneously recorded PPG and respiratory signals extracted from the MIMIC database (Physionet ATM data bank). The respiratory signal used as the ground truth and several performance measurement metrics such as magnitude squared coherence (MSC), correlation coefficients (CC), and normalized root mean square error (NRMSE) were used to compare the performance of MMSPCA based PPG derived RA. At the data length of 30 seconds, MSC, CC and NRMSE for proposed thresholding were 0.65, 0.62 and -0.82 dB respectively where as they were 0.68, 0.47 and 0.25 dB respectively for existing thresholding. These results illustrated that the proposed threshold selection performs better than existing threshold selection for short length data.

  10. Activity analysis: measurement of the effectiveness of surgical training and operative technique.

    Science.gov (United States)

    Shepherd, J. P.; Brickley, M.

    1992-01-01

    All surgical procedures are characterised by a sequence of steps and instrument changes. Although surgical efficiency and training in operative technique closely relate to this process, few studies have attempted to analyse it quantitatively. Because efficiency is particularly important in day surgery and lower third molar removal is a high-volume procedure, the need for which is responsible for particularly long waiting-lists in almost all UK health regions, this operation was selected for evaluation. A series of 80 consecutive procedures, carried out for 43 day-stay patients under general anaesthesia by seven junior staff (senior house officers and registrars: 39 procedures) and four senior staff (senior registrars and consultants: 41 procedures) were analysed. Median operating time for procedures which required retraction of periosteum was 9.5 min (range 2.7-23.3 min). Where these steps were necessary, median time for incision was 25 s (range 10-90 s); for retraction of periosteum, 79 s (range 5-340 s); for bone removal, 118 s (range 10-380 s); for tooth excision, 131 s (range 10-900 s); for debridement, 74 s (range 5-270 s); and for suture, 144 s (range 25-320 s). Junior surgeons could be differentiated from senior surgeons on the basis of omission, repetition and duration of these steps. Juniors omitted retraction of periosteum in 10% of procedures (seniors 23%) and suture in 13% (seniors 32%). Juniors repeated steps in 47% of operations; seniors, 14%. Junior surgeons took significantly more time than senior surgeons for incision, bone removal and tooth excision.(ABSTRACT TRUNCATED AT 250 WORDS) Images Figure 1 PMID:1471840

  11. Extended automated separation techniques in destructive neutron activation analysis; application to various biological materials, including human tissues and blood

    International Nuclear Information System (INIS)

    Tjioe, P.S.; Goeij, J.J.M. de; Houtman, J.P.W.

    1976-09-01

    Neutron activation analysis may be performed as a multi-element and low-level technique for many important trace elements in biological materials, provided that post-irradiation chemical separations are applied. This paper describes a chemical separation consisting of automated procedures for destruction, distillation, and anion-chromatography. The system developed enables the determination of 14 trace elements in biological materials, viz. antimony, arsenic, bromine, cadmium, chromium, cobalt, copper, gold, iron, mercury, molybdenum, nickel, selenium, and zinc. The aspects of sample preparation, neutron irradiation, gamma-spectrum evaluation, and blank-value contribution are also discussed

  12. Temporal Courses in EEG Theta and Alpha Activity in the Dynamic Health Qigong Techniques Wu Qin Xi and Liu Zi Jue

    Directory of Open Access Journals (Sweden)

    Diana Henz

    2018-01-01

    Full Text Available Health Qigong is a common technique of Traditional Chinese Medicine applied to strengthen mental and physical health. Several studies report increases in EEG theta and alpha activity after meditative Qigong techniques indicating a relaxed state of mind. To date, little is known on the effects of dynamic Health Qigong techniques that comprise bodily movements on brain activity. In the current study, we compared effects of two dynamic Health Qigong techniques on EEG brain activity. Subjects performed the techniques Wu Qin Xi (five animals play and Liu Zi Jue (six healing sounds in a within-subjects design. Eyes-open and eyes-closed resting EEG was recorded before and immediately after each 15-min practice block. Additionally, the Profile of Mood States (POMS questionnaire was administered at pretest, and after each 15-min practice block. Results show a decrease in alpha activity after 15 min, followed by an increase after 30 min in the Health Qigong technique Liu Zi Jue. Theta activity was decreased after 15 min, followed by an increase after 30 min in the technique Wu Qin Xi. Results of the POMS indicated an increased vigor-activity level with decreased fatigue and tension-anxiety levels in both techniques after 30 min of practice. Our results demonstrate different temporal dynamics in EEG theta and alpha activity for the Health Qigong techniques Wu Qin Xi and Liu Zi Jue. We hypothesize that the found brain activation patterns result from different attentional focusing styles and breathing techniques performed during the investigated Health Qigong techniques.

  13. The analysis of pre-hispanic obsidians by the neutron activation technique

    International Nuclear Information System (INIS)

    Esparza L, R.; Tenorio C, D.; Jimenez R, M.

    2005-01-01

    The project called Bank of Data of the locations of obsidian of the occident of Mexico (Analysis by Neutron activation) as it has been explained, for the use of the Neutron activation analysis in archaeological materials it was developed from the years 1960. In Mexico it use is unfortunately very later, until the middle of the decade of 1990 the first studies were made. Without a doubt we face a bigger challenge which consists on creating databases of different materials to have comparison parameters of the studied materials. In the foreigner's different institutions (Missouri Research Reactor, University of Berkeley, among other) it has been of great importance the possibility to be able to compare the databases of each investigation with other coming from different institutions. The results to that have arrived even present certain error margin using the same study patterns, for what is advisable to only use own databases; for it, in the project of this investigation it is sought that the Nuclear Center has its own wealth of information of the different obsidian locations that they exist in the Mexican territory, so that later on the reliable analysis of materials coming from different archaeological places is made to know its origin. Thirteen obsidian locations were analyzed that are located in the states of Michoacan, Jalisco, Guanajuato and Zacatecas. The geologic samples were obtained of different investigation projects, of the National Institute of Anthropology and History, of the Center of Meso-American Studies and of Central America (CEMCA) and of the New Orleans University. One of the problems that face when studying the obsidian locations in the occident of Mexico is linked with the variety of colors that they exist in different locations. With it, we want to show the difficulty that it exists to study this material at level 'eye meter', that which could carry errors and graft of the archaeological information. It is for that reason that it becomes

  14. Elemental analysis and plant samples at el-Manzala lake by neutron activation analysis technique

    International Nuclear Information System (INIS)

    Eissa, E.A.; Rofail, N.B.; Abdel-Haleem, A.S.; El-Abbady, W.H.; Hassan, A.M.

    1995-01-01

    A soil and a plant samples were taken from two locations, Bahr el-Bakar and Bahr Kados at the Manzala lake, where a high pollution is expected. The samples were especially treated and prepared for investigation by thermal neutron activation analysis (NAA). The irradiation facilities of the first egyptian research reactor (ET-R R-1) and the hyper pure germanium (HPGe) detection system were used for such a type of analysis. Among the 34 identified elements Fe, Co, As, Ru, Cd, Te, La, Sm, Eu, Tb, Hg, Th, and U are of a special significance because of their toxic deleterious impact to organisms. This work is a part of a research project concerning pollution studies on the river nile and some lakes of egypt. The data obtained in the present work stand as a reference basic record for any future follow up of the contamination level. 1 tab

  15. On-line monitoring of wear and/or corrosion processes by thin layer activation technique

    International Nuclear Information System (INIS)

    Alexandreanu, B.; Popa-Simil, L.; Voiculescu, D.; Racolta, P.M.

    1995-01-01

    The Thin Layer Activation (TLA) principle consists in creating a radioactive layer by ion beam irradiation of a machine part subjected to wear. The method is based on the determination of the increasing radioactivity in the lubricant due to suspended wear particles and has a sensitivity threshold of about 40 μ g / cm 2 . The most used radioactive markers are 56 Co, 57 Co, 65 Zn, 51 Cr, 48 V, 124 Sb. In this paper, we have chosen to present an on-line wear level determination experiment performed for a thermal engine. The study of possible influence of a SR3 added lubricant upon the wear level of a Dacia 1410 car engine is presented, illustrating the on-line TLA based monitoring of wear for industrial uses. The examples presented outline the advantages of this method over the conventional one, like the fast response and the high sensitivity, while no dismantling of the engine is implied. (author)

  16. TEACHING GRAMMAR FOR ACTIVE USE: A FRAMEWORK FOR COMPARISON OF THREE INSTRUCTIONAL TECHNIQUES

    Directory of Open Access Journals (Sweden)

    Sasan Baleghizadeh

    2011-01-01

    Full Text Available Teaching grammar in a way that enables students to use grammatical structures correctly in their active use has always been one of the intricate tasks for most practitioners. This study compared the ef­fectiveness of three instructional methods: games, dialogues practiced through role-play, and unfocused tasks for teaching grammar. Forty eight pre-intermediate female students participated in this study. The structures chosen were Conditional Sentence Type 2 and Wish structures for expressing present desires. A posttest was administered to assess the subjects' productive knowledge of the grammatical patterns. The results showed that there were no significant differences in the performance of groups. In other words, all three methods were equally effective to boost students' grammatical knowledge of the two structures.

  17. Switching Control of Wind Turbine Sub-Controllers Based on an Active Disturbance Rejection Technique

    Directory of Open Access Journals (Sweden)

    Yancai Xiao

    2016-10-01

    Full Text Available Wind power generation systems require complex control systems with multiple working conditions and multiple controllers. Under different operating conditions, switching without disturbancebetweenthesub-controllersplaysacriticalroleinensuringthestabilityofpowersystems. The sub-controllers of two typical cases in the permanent magnet direct drive (PMDD wind turbine running process are studied, one is the proportional integral (PI controller in the maximum power points tracking (MPPT stage, the other is the fuzzy pitch angle controller in the constant power stage. The switching strategy of the two sub-controllers is the emphasis in this research. Based on the active disturbance rejection control (ADRC, the switching mode of the sub-controllers is proposed, which can effectively restrain the sudden changes of the rotor current during the switching process, and improve the quality of power generation. The feasibility and effectiveness of the sub-controller switching strategy is verified by Matlab/Simulink simulation for a 2 MW PMDD wind turbine.

  18. Concepts and techniques: Active electronics and computers in safety-critical accelerator operation

    International Nuclear Information System (INIS)

    Frankel, R.S.

    1995-01-01

    The Relativistic Heavy Ion Collider (RHIC) under construction at Brookhaven National Laboratory, requires an extensive Access Control System to protect personnel from Radiation, Oxygen Deficiency and Electrical hazards. In addition, the complicated nature of operation of the Collider as part of a complex of other Accelerators necessitates the use of active electronic measurement circuitry to ensure compliance with established Operational Safety Limits. Solutions were devised which permit the use of modern computer and interconnections technology for Safety-Critical applications, while preserving and enhancing, tried and proven protection methods. In addition a set of Guidelines, regarding required performance for Accelerator Safety Systems and a Handbook of design criteria and rules were developed to assist future system designers and to provide a framework for internal review and regulation

  19. The application of computer technique in routine neutron activation analysis using high resolution gamma ray spectrometry

    International Nuclear Information System (INIS)

    Szopa, Z.; Plejewska, M.; Staszelis, J.

    1982-01-01

    A full system of four computer programs for routine - qualitative and quantitative - neutron activation analysis (NAA) using high resolution gamma ray-spectrometry had been elaborated. The structure and possibilities of the ''data flow'' programs i.e. programs DIDPDP and DIDCDC, dedicated for fast and reliable ''off line'' data transfer between the buffer memory of the spectrometric line (9-track magnetic tape) and the fast access memory (disc) of the used computers PDP-11/45 and CYBER-73 had been presented. The structure and organization of the ''data processing'' programs i.e. programs SAWAPS and MAZYG had been presented as well. The utility and reliability of these programs in the case of the large-scale, routine NAA, exampled by analysis of filters with air polutants, had been tested and discussed. Programs are written mainly in FORTRAN. (author)

  20. Concepts and techniques: Active electronics and computers in safety-critical accelerator operation

    Energy Technology Data Exchange (ETDEWEB)

    Frankel, R.S.

    1995-12-31

    The Relativistic Heavy Ion Collider (RHIC) under construction at Brookhaven National Laboratory, requires an extensive Access Control System to protect personnel from Radiation, Oxygen Deficiency and Electrical hazards. In addition, the complicated nature of operation of the Collider as part of a complex of other Accelerators necessitates the use of active electronic measurement circuitry to ensure compliance with established Operational Safety Limits. Solutions were devised which permit the use of modern computer and interconnections technology for Safety-Critical applications, while preserving and enhancing, tried and proven protection methods. In addition a set of Guidelines, regarding required performance for Accelerator Safety Systems and a Handbook of design criteria and rules were developed to assist future system designers and to provide a framework for internal review and regulation.

  1. The effect of hydrodistillation techniques on yield, kinetics, composition and antimicrobial activity of essential oils from flowers of Lavandula officinalis L.

    Directory of Open Access Journals (Sweden)

    Stanojević Ljiljana

    2011-01-01

    Full Text Available The essential oils from flowers of Lavandula officinalis L. (L. officinalis L. = L. angustifolia Mill. were obtained by two hydrodistillation techniques: standard (technique I and modified (technique II Clevenger hydrodistillation. The yield, hydrodistillation kinetics, composition and antimicrobial activity of essential oils were investigated. The higher yield of oil was obtained by hydrodistillation technique II. The new analytical hydrodistillation kinetics model of essential oil from Lavandulae flowers was defined. The essential oil composition was analyzed by gas chromatography-mass spectroscopy (GC-MS. There are differences in chemical compositions of the oils obtained by different techniques. Antimicrobial activity of essential oil obtained by technique I and II against Salmonella enteritidis, Klebsiella pneumoniae, Staphylococcus aureus, Enterococcus faecalis, Candida albicans and Aspergillus niger is the same, while the activity against Escherichia coli and Pseudomonas aeruginosa is slightly different.

  2. Enhancements and Health-Related Studies of Neutron Activation Analysis Technique

    International Nuclear Information System (INIS)

    Soliman, M.A.M.

    2012-01-01

    The work presented in this thesis covers two major points. One algorithm concerns with establishment of an accurate standardization method with multi-elemental capabilities and low workload suitable for NAA standardization at ETRR-2. The second one deals with constructing and developing an effective nondestructive technique for analysis of liquid samples based on NAA using (very) short-lived radionuclides. To achieve the first goal, attention has been directed toward implementation of the k 0 -method for calculation of the elements concentrations in the samples. The k 0 -method of NAA standardization has a considerable success as a method for accurate multi-elemental analysis with comparable low workload. The k 0 - method is based on the fact that the unknown sample is irradiated with only one standard element as comparator. To access the implementation of this method at ETRR-2, careful and complete characterization of the neutron flux parameters in the irradiation positions as well as the efficiency calibration of the γ-ray spectrometer must be carried out. The required neutron flux parameters are: the ratio of the thermal to epithermal neutron fluxes (f) and the deviation factor (α) of the epithermal neutron flux from the ideal 1/E law. The work presented in Chapter 4 shows the efficiency calibration curve of the γ ray spectrometer system which was obtained using standard radioactive point sources. Moreover, the f and α parameters were determined in some selected irradiation sites using sets of Zr-Au as neutron flux monitors. Due to different locations relative to the reactor core, the available neutron fluxes in the selected irradiation positions differ substantially, so that different irradiation demands can be satisfied. The reference materials coal NIST 1632c and IAEA-Soil 7 were analyzed for data validation and good agreement between the experimental values and the certified values was obtained. The obtained results have revealed that the k 0 -NAA

  3. Determination of boron in water solution by an indirect neutron activation technique from a 241Am/Be source

    International Nuclear Information System (INIS)

    Sales, H.B.

    1981-08-01

    Boron content in water solutions has been analysed by Indirect Activation Technique a twin 241 Am/Be neutron source with a source strength of 9x10 6 n/seg. The boron concentration was inferred from the measurement of the activity induced in a vanadium flux monitor. The vanadium rod was located inside the boron solution in a standart geometrical set up with respect to the neutron source. Boron concentrations in the range of 100 to 1000 ppm were determined with an overall accuracy of about 2% during a total analysis time of about 20 minutes. Eventhough the analysis is not selective for boron yet due the rapid, simple and precise nature, it is proposed for the analysis of boron in the primary coolant circuit of Nuclear Power Plants of PWR type. (Author) [pt

  4. A new technique for radon measurement based on a combination of a track-etch detector and activated charcoal

    Energy Technology Data Exchange (ETDEWEB)

    Sutej, T.; Krizman, M.; Ilic, R. (Institut Jozef Stefan, Ljubljana (Yugoslavia))

    1991-01-01

    A new technique for radon measurement in the natural environment was investigated. It is based on the use of activated charcoal and a track-etch detector. The charcoal acts as a radon collector from the air and the track-etch detector as a recorder of the alpha particles emitted by radon and its decay products. Our preliminary results show that the response of the new dosimeter to radon, using Deodorant activated charcoal (TOK, Yugoslavia) and a CR-39 track-etch detector, is 1.4 tracks cm{sup -2}/Bqm{sup -3}d, which is about eight times higher than that obtained with a standard track-etch dosimeter. (author).

  5. A COMPARISON OF TWO TAPING TECHNIQUES (KINESIO AND MCCONNELL) AND THEIR EFFECT ON ANTERIOR KNEE PAIN DURING FUNCTIONAL ACTIVITIES

    Science.gov (United States)

    Babu, Jenie; Dmochowska, Katarzyna; Scariah, Shiju; Varughese, Jincy

    2013-01-01

    Background: Anterior knee pain is a clinical syndrome characterized by pain experienced perceived over the anterior aspect of the knee that can be aggravated by functional activities such as stair climbing and squatting. Two taping techniques commonly used for anterior knee pain in the clinic include the McConnell Taping Technique (MT) and the Kinesio Taping® Method (KT®). Objective: The purpose of this study was to compare the effectiveness of KT® and the MT versus no tape in subjects with anterior knee pain during a squat lift and stair climbing. Design: Pretest‐ posttest design. Participants: A total of 20 subjects (15 female, 5 male) with unilateral anterior knee pain were recruited. The mean age of the subjects was 24 (+/–3) years, with a mean weight of 160 (+/–28) pounds. Methods: Each participant was tested during two functional activities; a squat lift with a weighted box (10% of his/her body weight, plus the weight [8.5 pounds] of the box) and stair climbing under three conditions: 1) no tape, 2) MT and 3) KT®. Pain levels were assessed (verbally) using the 0‐10 Numeric Pain Intensity Scale. Results: The median (interquartile range [IQR]) pain during squat lift was 2 (2.75) for no tape, 1 (1) for KT®, and 0.5 (2) for McConnell, with no significant differences between the groups. During the stair activity the median (IQR) pain was 1.5 (2.75) for no tape, 1 (1.75) for KT®, and 1 (1.75) for MT with a significant difference (p=0.024) between the groups. Further analysis determined that the only a significant difference was (p=0.034) between the no tape and the KT® conditions. Conclusion: The results of this study found that both the KT® and the MT may be effective in reducing pain during stair climbing activities. Level of Evidence: Level 2, Prospective Cohort study PMID:23593548

  6. A comparison of two taping techniques (kinesio and mcconnell) and their effect on anterior knee pain during functional activities.

    Science.gov (United States)

    Campolo, Marc; Babu, Jenie; Dmochowska, Katarzyna; Scariah, Shiju; Varughese, Jincy

    2013-04-01

    Anterior knee pain is a clinical syndrome characterized by pain experienced perceived over the anterior aspect of the knee that can be aggravated by functional activities such as stair climbing and squatting. Two taping techniques commonly used for anterior knee pain in the clinic include the McConnell Taping Technique (MT) and the Kinesio Taping® Method (KT®). The purpose of this study was to compare the effectiveness of KT® and the MT versus no tape in subjects with anterior knee pain during a squat lift and stair climbing. Pretest- posttest design. A total of 20 subjects (15 female, 5 male) with unilateral anterior knee pain were recruited. The mean age of the subjects was 24 (+/-3) years, with a mean weight of 160 (+/-28) pounds. Each participant was tested during two functional activities; a squat lift with a weighted box (10% of his/her body weight, plus the weight [8.5 pounds] of the box) and stair climbing under three conditions: 1) no tape, 2) MT and 3) KT®. Pain levels were assessed (verbally) using the 0-10 Numeric Pain Intensity Scale. The median (interquartile range [IQR]) pain during squat lift was 2 (2.75) for no tape, 1 (1) for KT®, and 0.5 (2) for McConnell, with no significant differences between the groups. During the stair activity the median (IQR) pain was 1.5 (2.75) for no tape, 1 (1.75) for KT®, and 1 (1.75) for MT with a significant difference (p=0.024) between the groups. Further analysis determined that the only a significant difference was (p=0.034) between the no tape and the KT® conditions. The results of this study found that both the KT® and the MT may be effective in reducing pain during stair climbing activities. Level 2, Prospective Cohort study.

  7. Use of the neutron activation technique: soil-plant transfer factor

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Wellington Ferrari da, E-mail: wferrari250@yahoo.com.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pós-Graduação em Ciências e Técnicas Nucleares; Menezes, Maria Ângela de B.C., E-mail: menezes@cdtn.br [Centro Desenvolvimento da Tecnologia Nuclear (SERTA/CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Serviço de Técnicas Analíticas. Laboratório de Ativação Neutrônica; Marques, Douglas José, E-mail: douglasjmarques81@yahoo.com.br [Universidade José do Rosário Vellano, Alfenas, MG (Brazil). Setor de Olericultura e Experimentação em Agricultura Orgânica

    2017-07-01

    Recent studies have demonstrated the importance of the soil-plant transfer factor in the absorption and translocation of chemical elements, thus, it is possible to evaluate a better decision-making in the consecutive plantations. To determine these values, the content of a chemical element present in the plant or part of it with the total content present in the same soil where it is grown is considered. The objective of this study was to determine the concentrations of the chemical elements present in soil, leaf and grains corn, by neutron activation analysis and to compare the different soil-plant transfer factors. The samples were collected in a property located in the region of Biquinhas, MG, and irradiated in the TRIGA MARK I IPR-R1 CDTN / CNEN nuclear reactor. Thus, the concentrations of Br, Ce Fe, K, La, Na, Rb, Zn were determined. The soil-plant transfer factors for the elements found were varied, indicating a greater potassium absorption capacity (K). (author)

  8. Study of organohalogens in foodstuffs and environmental samples by neutron activation analysis and related techniques

    International Nuclear Information System (INIS)

    Xu, D. D.; Mao, X.Y.; Ouyang, H.; Chai, Z. F.; Zhang, H.; Sun, H. B.

    2004-01-01

    Pine needles and foodstuffs collected from Beijing, China, were analyzed by instrumental neutron activation analysis (INAA) combined with organic solvent extraction for total halogens, extractable organohalogens (EOX) and extractable persistent organohalogens (EPOX). The INAA detection limits are 50 ng, 8 ng and 3.5 ng for Cl, Br and I, respectively. The contents and distribution patterns of organohalogens in these samples are reported. EOCl accounted for 0.013-0.016% and 1.6-2.7% of the total chlorine in yogurt and apples, respectively, which suggested that chlorine in foodstuffs mainly existed as inorganic species and non-extractable organochlorines. EOCl contents in pine needles and foodstuffs were noticeably higher than those of EOBr and EOI. For pine needles, yogurt and apples, 1.6-34%, 23-58% and 29-35% of EOCl remained as extractable persistent organochlorine (EPOCl), respectively. Pine needle containing higher EOCl contents in chemical industrial and traffic hub areas indicated that chemical industries and exhaust emission from vehicle were the main sources of organochlorines in the Beijing's air. The relative proportions of the known organochlorines (such as HCHs, DDTs, chlordanes, heptachlor, HCB and PCBs) to the total EOCl and EPOCl were 0.04-1.6% and 0.7-21.5%, respectively, which implied that the identity of species of a major portion of the EOCl and EPOCl measured in pine needles was unknown. (author)

  9. Flexible picosecond thulium-doped fiber laser using the active mode-locking technique.

    Science.gov (United States)

    Yin, Ke; Zhang, Bin; Yang, Weiqiang; Chen, He; Chen, Shengping; Hou, Jing

    2014-07-15

    An all-fiber actively mode-locked thulium-doped fiber laser (AML-TDFL) based on a 10 GHz bandwidth electro-optic intensity modulator (EOM) providing flexible picosecond pulses at 1980 nm is presented. The EOM is driven by electrical pulses rather than traditional sine-wave signals. The repetition rate of output pulses was 21.4 MHz at fundamental mode-locking, which could be scaled up to 1.498 GHz through the 70th order harmonic mode-locking, and the shortest measured output pulse width was 38 ps. Furthermore, the output pulse width could be tuned by either adjusting the modulation frequency with small detuning or changing the width of these driving electrical pulses without frequency detuning. In our work, the stability of these mode-locked pulses obtained from the AML-TDFL was superior; for instance, the measured supermode suppression ratio of 1.498 GHz pulses train was up to 48 dB.

  10. Use of the neutron activation technique: soil-plant transfer factor

    International Nuclear Information System (INIS)

    Silva, Wellington Ferrari da; Menezes, Maria Ângela de B.C.; Marques, Douglas José

    2017-01-01

    Recent studies have demonstrated the importance of the soil-plant transfer factor in the absorption and translocation of chemical elements, thus, it is possible to evaluate a better decision-making in the consecutive plantations. To determine these values, the content of a chemical element present in the plant or part of it with the total content present in the same soil where it is grown is considered. The objective of this study was to determine the concentrations of the chemical elements present in soil, leaf and grains corn, by neutron activation analysis and to compare the different soil-plant transfer factors. The samples were collected in a property located in the region of Biquinhas, MG, and irradiated in the TRIGA MARK I IPR-R1 CDTN / CNEN nuclear reactor. Thus, the concentrations of Br, Ce Fe, K, La, Na, Rb, Zn were determined. The soil-plant transfer factors for the elements found were varied, indicating a greater potassium absorption capacity (K). (author)

  11. Investigation of the composition and antibacterial activity of Ukrain™ drug using liquid chromatography techniques.

    Science.gov (United States)

    Jesionek, Wioleta; Fornal, Emilia; Majer-Dziedzic, Barbara; Móricz, Ágnes M; Nowicky, Wassil; Choma, Irena M

    2016-01-15

    The greater celandine (Chelidonium majus L.) has been known for the centuries as a medicinal plant. One of the therapeutic agents based on C. majus is anticancer drug Ukrain™ known as a semi-synthetic C. majus alkaloid derivative. Although there are no doubts about antitumor properties of the drug, there is still controversy about its composition. In this study, Ukrain™ was subjected to TLC and LC-MS/MS analyses to compare it with C. majus alkaloid root extract and to determine its composition. Moreover, microbiological activity of both Ukrain™ and the alkaloid extract were tested against Bacillus subtilis strains using TLC-direct bioautography. Sanguinarine, chelidonine, α-homochelidonie and chelerythrine were found to have antibacterial properties. Besides chelidonine, sanguinarine, chelerythrine, protopine, allocryptopine, homochelidonie, berberine and coptisine reported earlier in literature, the presence of stylopine, norchelidonine, dihydrochelidonine and hydroberberine in Ukrain™ was detected, and here they have been reported for the first time. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Application of the neutron activation analysis technique in trace elements analysis

    International Nuclear Information System (INIS)

    Khamis, I.; Sarheel, A.; Al-Somel, N.

    2006-12-01

    The main objective in this study is the implementation k 0 -standardization method (single comparator method) using gold comparator as a routine method in neutron activation analysis laboratory in Engineering Nuclear Department. Cadmium ratio Rcd; Cd-ratio = [A s p/(A s p) C d] and the nuclear reactor constants (f=φ t h/φ e pi subcadimum thermal- to- epithermal neutron flux ratio and α with describing the φ e (E)∼ 1/E 1+α neutron flux distribution) were determined in the inner and outer irradiation sites at MNS Reactor. K 0 -IAEA software, which provided by the Agency, has been installed and applied in our laboratory. Trace elements in many kinds of samples (biological, environmental, alloy ...etc) were determined using K 0 -IAEA software. The results of standard reference materials (SRM's) obtained in this work show a good agreement with the certified values, and we got these results with a good accuracy closer to results which we got from relative NAA method. (author)

  13. Active contour modes Crisp: new technique for segmentation of the lungs in CT images

    International Nuclear Information System (INIS)

    Reboucas Filho, Pedro Pedrosa; Cortez, Paulo Cesar; Holanda, Marcelo Alcantara

    2011-01-01

    This paper proposes a new active contour model (ACM), called ACM Crisp, and evaluates the segmentation of lungs in computed tomography (CT) images. An ACM draws a curve around or within the object of interest. This curve changes its shape, when some energy acts on it and moves towards the edges of the object. This process is performed by successive iterations of minimization of a given energy, associated with the curve. The ACMs described in the literature have limitations when used for segmentations of CT lung images. The ACM Crisp model overcomes these limitations, since it proposes automatic initiation and new external energy based on rules and radiological pulmonary densities. The paper compares other ACMs with the proposed method, which is shown to be superior. In order to validate the algorithm a medical expert in the field of Pulmonology of the Walter Cantidio University Hospital from the Federal University of Ceara carried out a qualitative analysis. In these analyses 100 CT lung images were used. The segmentation efficiency was evaluated into 5 categories with the following results for the ACM Crisp: 73% excellent, without errors, 20% acceptable, with small errors, and 7% reasonable, with large errors, 0% poor, covering only a small part of the lung, and 0% very bad, making a totally incorrect segmentation. In conclusion the ACM Crisp is considered a useful algorithm to segment CT lung images, and with potential to integrate medical diagnosis systems. (author)

  14. Neutron activation analysis techniques for identifying elemental status in Alzheimer's disease

    International Nuclear Information System (INIS)

    Ward, N.I.; Mason, J.A.

    1986-01-01

    Brain tissue (hippocampus and cerebral cortex) from Alzheimer's disease and control individuals sampled from Eastern Canada and the United Kingdom were analyzed for Ag, Al, As, B, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, I, K, La, Mg, Mn, Mo, Ni, Rb, S, Sb, Sc, Se, Si, Sn, Sr, Ti, V and Zn. Neutron activation analysis (thermal and prompt gamma-ray) methods were used. Very highly significant differences (S**: probability less than 0.005) for both study areas were shown between Alzheimer's disease (AD) and control (C) individuals: AD>C for Al, Br, Ca and S, and AD< C for Se, V and Zn. Aluminium content of brain tissue ranged form 3.605 to 21.738 μg/g d.w. (AD) and 0.379 to 4.768 μg/g d.w. (C). No statistical evidence of aluminium accumulation with age was noted. Possible zinc deficiency (especially for hippocampal tissue), was observed with zinc ranges of 31.42 to 57.91 μg/g d.w. (AD) and 37.31 to 87.10 μg/g d.w. (C), for Alzheimer's disease patients. (author)

  15. In vivo monitoring of toxic metals: assessment of neutron activation and x-ray fluorescence techniques

    International Nuclear Information System (INIS)

    Ellis, K.J.

    1986-01-01

    To date, cadmium, lead, aluminum, and mercury have been measured in vivo in humans. The possibilities of monitoring other toxic metals have also been demonstrated, but no human studies have been performed. Neutron activation analysis appears to be most suitable for Cd and Al measurements, while x-ray fluorescence is ideally suited for measurement of lead in superficial bone. Filtered neutron beams and polarized x-ray sources are being developed which will improve in vivo detection limits. Even so, several of the current facilities are already suitable for use in epidemiological studies of selected populations with suspected long-term low-level ''environmental'' exposures. Evaluation and diagnosis of patients presenting with general clinical symptoms attributable to possible toxic metal exposure may be assisted by in vivo examination. Continued in vivo monitoring of industrial workers, especially follow-up measurements, will provide the first direct assessment of changes in body burden and a direct measure of the biological life-times of these metals in humans. 50 refs., 4 figs., 2 tabs

  16. Characterization of electrically-active defects in ultraviolet light-emitting diodes with laser-based failure analysis techniques

    International Nuclear Information System (INIS)

    Miller, Mary A.; Tangyunyong, Paiboon; Cole, Edward I.

    2016-01-01

    Laser-based failure analysis techniques demonstrate the ability to quickly and non-intrusively screen deep ultraviolet light-emitting diodes (LEDs) for electrically-active defects. In particular, two laser-based techniques, light-induced voltage alteration and thermally-induced voltage alteration, generate applied voltage maps (AVMs) that provide information on electrically-active defect behavior including turn-on bias, density, and spatial location. Here, multiple commercial LEDs were examined and found to have dark defect signals in the AVM indicating a site of reduced resistance or leakage through the diode. The existence of the dark defect signals in the AVM correlates strongly with an increased forward-bias leakage current. This increased leakage is not present in devices without AVM signals. Transmission electron microscopy analysis of a dark defect signal site revealed a dislocation cluster through the pn junction. The cluster included an open core dislocation. Even though LEDs with few dark AVM defect signals did not correlate strongly with power loss, direct association between increased open core dislocation densities and reduced LED device performance has been presented elsewhere [M. W. Moseley et al., J. Appl. Phys. 117, 095301 (2015)

  17. Algorithmic developments of the kinetic activation-relaxation technique: Accessing long-time kinetics of larger and more complex systems

    Science.gov (United States)

    Trochet, Mickaël; Sauvé-Lacoursière, Alecsandre; Mousseau, Normand

    2017-10-01

    In spite of the considerable computer speed increase of the last decades, long-time atomic simulations remain a challenge and most molecular dynamical simulations are limited to 1 μ s at the very best in condensed matter and materials science. There is a need, therefore, for accelerated methods that can bridge the gap between the full dynamical description of molecular dynamics and experimentally relevant time scales. This is the goal of the kinetic Activation-Relaxation Technique (k-ART), an off-lattice kinetic Monte-Carlo method with on-the-fly catalog building capabilities based on the topological tool NAUTY and the open-ended search method Activation-Relaxation Technique (ART nouveau) that has been applied with success to the study of long-time kinetics of complex materials, including grain boundaries, alloys, and amorphous materials. We present a number of recent algorithmic additions, including the use of local force calculation, two-level parallelization, improved topological description, and biased sampling and show how they perform on two applications linked to defect diffusion and relaxation after ion bombardement in Si.

  18. Algorithmic developments of the kinetic activation-relaxation technique: Accessing long-time kinetics of larger and more complex systems.

    Science.gov (United States)

    Trochet, Mickaël; Sauvé-Lacoursière, Alecsandre; Mousseau, Normand

    2017-10-21

    In spite of the considerable computer speed increase of the last decades, long-time atomic simulations remain a challenge and most molecular dynamical simulations are limited to 1 μs at the very best in condensed matter and materials science. There is a need, therefore, for accelerated methods that can bridge the gap between the full dynamical description of molecular dynamics and experimentally relevant time scales. This is the goal of the kinetic Activation-Relaxation Technique (k-ART), an off-lattice kinetic Monte-Carlo method with on-the-fly catalog building capabilities based on the topological tool NAUTY and the open-ended search method Activation-Relaxation Technique (ART nouveau) that has been applied with success to the study of long-time kinetics of complex materials, including grain boundaries, alloys, and amorphous materials. We present a number of recent algorithmic additions, including the use of local force calculation, two-level parallelization, improved topological description, and biased sampling and show how they perform on two applications linked to defect diffusion and relaxation after ion bombardement in Si.

  19. Determination of REEs in agricultural soils of Pernambuco by the Neutron Activation Technique

    Energy Technology Data Exchange (ETDEWEB)

    França, Fernanda Cláudia S.S.; Ticianelli, Regina Beck; Moreira, Edson Gonçalves; Genezini, Frederico Antonio; Albuquerque, Adriana Muniz de Almeida; Silveira, Patrícia Brandão da; Barbosa, Jonnas Thiago de Lima; Almeida, Amanda Correia de; Honorato, Eliane Valentim; Hazin, Clovis Abrahão, E-mail: nanda_lq@hotmail.com, E-mail: valentim@cnen.gov.br, E-mail: emoreira@ipen.br [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil); Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Centro Regional de Ciências Nucleares (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2017-11-01

    The indiscriminate use of phosphate fertilizers causes adverse effects on biota, mainly due to the contaminants present in the rocks used in their manufacture. Among these contaminants, stand out the Rare Earth Elements (REEs) because of the significant increase in the use in several technological areas, such as in vehicle catalysts and also in fertilizer enrichment. In order to evaluate the levels of La, Sm, Nd, Yb and Lu by the Instrumental Neutron Activation Analysis (INAA), the present study aims to survey the ETRs in agricultural soils in Pernambuco/Brazil. For this study, 120 soil samples with a depth of 20 cm were collected in the main vegetable producing regions of the Metropolitan Region of Recife (RMR), evaluating organic and conventional crops with and without influenced by automotive vehicles. The results obtained when compared to the Netherlands reference values defined by the National Institute of Health and Environment (RIVM). The results were higher in all points for La (35 mg.kg-¹ at 85 mg.kg-¹) Yb, (4 mg.kg-¹ at 11 mg.kg-¹) and Lu (0.3 mg.kg-¹ at 0.7 mg.kg-¹ at 4 mg.kg-¹). For Nd (9 mg.kg-¹ at 137 mg.kg-¹) the concentrations were above the values reported by RIVM in 4 points. Comparing the types of crops evaluated with the literature, the results are found was above for all elements analyzed. It may be related to the increase in the use of phosphate fertilizers. However, in environments using smaller amounts of additives, the results were also significant and the more detailed studies are needed to evaluate other possible contamination pathways. (author)

  20. Clinical presentation of a mixed 23-gauge infusion and 20-gauge pars plana technique for active silicone oil removal.

    Science.gov (United States)

    Lei, Jian-Qin; Xie, An-Ming; Shi, Qiang

    2012-01-01

    To present with a clinical case series of a mixed 23-gauge infusion and 20-gauge pars plana technique for 5,700-centipoise silicone oil removal (SOR), and to discuss its efficacy and safety. This is a retrospective, non-randomized controlled study. We performed SOR with 23-gauge infusion and 20-gauge active suction technique on 29 patients 29 eyes from April to October, 2011 (mixed group). During the surgeries, a 23-gauge sclerotomy was made for infusion and a 20-gauge sclerotomy was used for active silicone oil suction. Anterior segment optical coherence tomography (OCT) was applied for 23-gauge sclerotomy analysis 1 day post-operation. Traditional 20-gauge SOR was performed on another consecutive 29 patients 29 eyes, the control group (20G group). There were 2 eyes (6.9%) in mixed group and 5 eyes (17.2%) in 20G group which had recurrent retinal detachment after surgery. Hopytony (IOP≤6mmHg) occurred in 8 eyes (27.6%) of mixed group and in 10 eyes (34.5%) of 20G group post-operation, but all of them recovered to the normal level finally. There were no statistical significant differences. Final visual acuity was significantly increased after surgery in both groups. Anterior segment OCT images were acquired from 13 eyes of mixed group, and all of them had a proper wound apposition. But local ciliary detachment was found in 9 eyes (69%). It was hard to define the OCT image of the sclerotomies and ciliary body because of the serious conjunctival hemorrhages and chemosis in 20G group. This mixed technique is a convenient and effective way to remove high viscosity silicone oil. Compared with traditional 20-gauge SOR, it does not increase the risk of post-operative complications and has less conjunctival reactions.. Transient postoperative hypotony is common for this procedure and subclinical ciliochoroidal detachment is a probable cause.

  1. Physiotherapists use a small number of behaviour change techniques when promoting physical activity: A systematic review comparing experimental and observational studies.

    Science.gov (United States)

    Kunstler, Breanne E; Cook, Jill L; Freene, Nicole; Finch, Caroline F; Kemp, Joanne L; O'Halloran, Paul D; Gaida, James E

    2017-12-07

    Physiotherapists promote physical activity as part of their practice. This study reviewed the behaviour change techniques physiotherapists use when promoting physical activity in experimental and observational studies. Systematic review of experimental and observational studies. Twelve databases were searched using terms related to physiotherapy and physical activity. We included experimental studies evaluating the efficacy of physiotherapist-led physical activity interventions delivered to adults in clinic-based private practice and outpatient settings to individuals with, or at risk of, non-communicable diseases. Observational studies reporting the techniques physiotherapists use when promoting physical activity were also included. The behaviour change techniques used in all studies were identified using the Behaviour Change Technique Taxonomy. The behaviour change techniques appearing in efficacious and inefficacious experimental interventions were compared using a narrative approach. Twelve studies (nine experimental and three observational) were retained from the initial search yield of 4141. Risk of bias ranged from low to high. Physiotherapists used seven behaviour change techniques in the observational studies, compared to 30 behaviour change techniques in the experimental studies. Social support (unspecified) was the most frequently identified behaviour change technique across both settings. Efficacious experimental interventions used more behaviour change techniques (n=29) and functioned in more ways (n=6) than did inefficacious experimental interventions (behaviour change techniques=10 and functions=1). Physiotherapists use a small number of behaviour change techniques. Less behaviour change techniques were identified in observational studies compared to experimental studies, suggesting physiotherapists use less BCTs clinically than experimentally. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  2. Behaviour change techniques targeting both diet and physical activity in type 2 diabetes: A systematic review and meta-analysis.

    Science.gov (United States)

    Cradock, Kevin A; ÓLaighin, Gearóid; Finucane, Francis M; Gainforth, Heather L; Quinlan, Leo R; Ginis, Kathleen A Martin

    2017-02-08

    Changing diet and physical activity behaviour is one of the cornerstones of type 2 diabetes treatment, but changing behaviour is challenging. The objective of this study was to identify behaviour change techniques (BCTs) and intervention features of dietary and physical activity interventions for patients with type 2 diabetes that are associated with changes in HbA 1c and body weight. We performed a systematic review of papers published between 1975-2015 describing randomised controlled trials (RCTs) that focused exclusively on both diet and physical activity. The constituent BCTs, intervention features and methodological rigour of these interventions were evaluated. Changes in HbA 1c and body weight were meta-analysed and examined in relation to use of BCTs. Thirteen RCTs were identified. Meta-analyses revealed reductions in HbA 1c at 3, 6, 12 and 24 months of -1.11 % (12 mmol/mol), -0.67 % (7 mmol/mol), -0.28 % (3 mmol/mol) and -0.26 % (2 mmol/mol) with an overall reduction of -0.53 % (6 mmol/mol [95 % CI -0.74 to -0.32, P 0.3 % reduction in HbA 1c : 'instruction on how to perform a behaviour', 'behavioural practice/rehearsal', 'demonstration of the behaviour' and 'action planning', as were intervention features 'supervised physical activity', 'group sessions', 'contact with an exercise physiologist', 'contact with an exercise physiologist and a dietitian', 'baseline HbA 1c >8 %' and interventions of greater frequency and intensity. Diet and physical activity interventions achieved clinically significant reductions in HbA 1c at three and six months, but not at 12 and 24 months. Specific BCTs and intervention features identified may inform more effective structured lifestyle intervention treatment strategies for type 2 diabetes.

  3. Thick-foils activation technique for neutron spectrum unfolding with the MINUIT routine-Comparison with GEANT4 simulations

    Science.gov (United States)

    Vagena, E.; Theodorou, K.; Stoulos, S.

    2018-04-01

    Neutron activation technique has been applied using a proposed set of twelve thick metal foils (Au, As, Cd, In, Ir, Er, Mn, Ni, Se, Sm, W, Zn) for off-site measurements to obtain the neutron spectrum over a wide energy range (from thermal up to a few MeV) in intense neutron-gamma mixed fields such as around medical Linacs. The unfolding procedure takes into account the activation rates measured using thirteen (n , γ) and two (n , p) reactions without imposing a guess solution-spectrum. The MINUIT minimization routine unfolds a neutron spectrum that is dominated by fast neutrons (70%) peaking at 0.3 MeV, while the thermal peak corresponds to the 15% of the total neutron fluence equal to the epithermal-resonances area. The comparison of the unfolded neutron spectrum against the simulated one with the GEANT4 Monte-Carlo code shows a reasonable agreement within the measurement uncertainties. Therefore, the proposed set of activation thick-foils could be a useful tool in order to determine low flux neutrons spectrum in intense mixed field.

  4. Metal and trace element assessment of estuary sediments from Santos, Brazil, by neutron activation and atomic absorption techniques

    International Nuclear Information System (INIS)

    Amorim, Eduardo P.; Favaro, Deborah I.T.; Berbel, Glaucia B.B.; Braga, Elisabete S.

    2007-01-01

    In order to better understanding geochemical and environmental processes and their possible changes due to anthropogenic activities trace metal analyses and their distribution in marine sediments are commonly undertaken. The present study reports result concerning the distribution of some major, trace and rare earth elements in the Santos estuarine marine sediments. Thirteen bottom sediment samples (SV0501 to SV0513) were collected in this estuary, including regions of Sao Vicente, Santos, Cubatao, Vicente de Carvalho and Santos' Bay, in the summer of 2005. Multielemental analysis was carried out by instrumental neutron activation analysis (INAA). For total mercury determination cold vapor atomic absorption technique (CV AAS) was employed. In both cases methodology validation was performed by certified reference material analyses. The results obtained for multielemental concentrations in the sediment samples were compared with NASC (North American Shale Composite) values. The concentration values obtained for As and metals Cr, Hg and Zn in the sediment samples were compared to Canadian Council of Minister of the Environment (CCME) oriented values (TEL and PEL values). In general, the samples located near the Cubatao region showed higher concentrations for all elements analyzed probably due to the high impact of industrial activities. (author)

  5. Metal and trace element assessment of estuary sediments from Santos, Brazil, by neutron activation and atomic absorption techniques

    Energy Technology Data Exchange (ETDEWEB)

    Amorim, Eduardo P.; Favaro, Deborah I.T. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mails: ducamorim@yahoo.com.br; defavaro@ipen.br; Berbel, Glaucia B.B.; Braga, Elisabete S. [Universidade de Sao Paulo (USP), SP (Brazil). Inst. Oceanografico. Lab. de Nutrientes, Micronutrientes e Tracos nos Oceanos - LABNUT]. E-mail: edsbraga@usp.br

    2007-07-01

    In order to better understanding geochemical and environmental processes and their possible changes due to anthropogenic activities trace metal analyses and their distribution in marine sediments are commonly undertaken. The present study reports result concerning the distribution of some major, trace and rare earth elements in the Santos estuarine marine sediments. Thirteen bottom sediment samples (SV0501 to SV0513) were collected in this estuary, including regions of Sao Vicente, Santos, Cubatao, Vicente de Carvalho and Santos' Bay, in the summer of 2005. Multielemental analysis was carried out by instrumental neutron activation analysis (INAA). For total mercury determination cold vapor atomic absorption technique (CV AAS) was employed. In both cases methodology validation was performed by certified reference material analyses. The results obtained for multielemental concentrations in the sediment samples were compared with NASC (North American Shale Composite) values. The concentration values obtained for As and metals Cr, Hg and Zn in the sediment samples were compared to Canadian Council of Minister of the Environment (CCME) oriented values (TEL and PEL values). In general, the samples located near the Cubatao region showed higher concentrations for all elements analyzed probably due to the high impact of industrial activities. (author)

  6. Long term storage of Pleurotus ostreatus and Trametes versicolor isolates using different cryopreservation techniques and its impact on laccase activity.

    Science.gov (United States)

    Eichlerová, Ivana; Homolka, Ladislav; Tomšovský, Michal; Lisá, Ludmila

    2015-12-01

    The strain Pleurotus ostreatus Florida f6, its 45 basidiospore-derived isolates (both monokaryons and dikaryons prepared in our laboratory), Trametes versicolor strain CCBAS 614 and 22 other T. versicolor isolates obtained from the sporocarps collected in distant localities were successfully preserved for 12 y using perlite and straw cryopreservation protocols. All tested isolates survived a 12-year storage in liquid nitrogen (LN) and their laccase production and Poly B411 decolorization capacity was preserved. Also mycelium extension rate and the types of colony appearance of individual isolates remained unchanged. Different cryopreservation techniques were also tested for the short time (24 h) and the long time (6 m) storage of the culture liquid with extracellular laccase produced by T. versicolor strain CCBAS 614. The results showed that 10 % glycerol was the most suitable cryopreservant. The absence of the cryopreservant did not cause high loss of laccase activity in the samples; the presence of DMSO (5 or 10 %) in LN-stored samples caused mostly a decrease of laccase activity. For the preservation of laccase activity in the liquid culture the storage in the freezer at -80 °C is more convenient than the storage in liquid nitrogen. Copyright © 2015 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

  7. The influence of "C-factor" and light activation technique on polymerization contraction forces of resin composite

    Directory of Open Access Journals (Sweden)

    Sérgio Kiyoshi Ishikiriama

    2012-12-01

    Full Text Available OBJECTIVES: This study evaluated the influence of the cavity configuration factor ("C-Factor" and light activation technique on polymerization contraction forces of a Bis-GMA-based composite resin (Charisma, Heraeus Kulzer. MATERIAL AND METHODS: Three different pairs of steel moving bases were connected to a universal testing machine (emic DL 500: groups A and B - 2x2 mm (CF=0.33, groups C and D - 3x2 mm (CF=0.66, groups e and F - 6x2 mm (CF=1.5. After adjustment of the height between the pair of bases so that the resin had a volume of 12 mm³ in all groups, the material was inserted and polymerized by two different methods: pulse delay (100 mW/cm² for 5 s, 40 s interval, 600 mW/cm² for 20 s and continuous pulse (600 mW/cm² for 20 s. Each configuration was light cured with both techniques. Tensions generated during polymerization were recorded by 120 s. The values were expressed in curves (Force(N x Time(s and averages compared by statistical analysis (ANOVA and Tukey's test, p<0.05. RESULTS: For the 2x2 and 3x2 bases, with a reduced C-Factor, significant differences were found between the light curing methods. For 6x2 base, with high C-Factor, the light curing method did not influence the contraction forces of the composite resin. CONCLUSIONS: Pulse delay technique can determine less stress on tooth/restoration interface of adhesive restorations only when a reduced C-Factor is present.

  8. Evaluation of Techniques to Detect Significant Network Performance Problems using End-to-End Active Network Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, R.Les; Logg, Connie; Chhaparia, Mahesh; /SLAC; Grigoriev, Maxim; /Fermilab; Haro, Felipe; /Chile U., Catolica; Nazir, Fawad; /NUST, Rawalpindi; Sandford, Mark

    2006-01-25

    End-to-End fault and performance problems detection in wide area production networks is becoming increasingly hard as the complexity of the paths, the diversity of the performance, and dependency on the network increase. Several monitoring infrastructures are built to monitor different network metrics and collect monitoring information from thousands of hosts around the globe. Typically there are hundreds to thousands of time-series plots of network metrics which need to be looked at to identify network performance problems or anomalous variations in the traffic. Furthermore, most commercial products rely on a comparison with user configured static thresholds and often require access to SNMP-MIB information, to which a typical end-user does not usually have access. In our paper we propose new techniques to detect network performance problems proactively in close to realtime and we do not rely on static thresholds and SNMP-MIB information. We describe and compare the use of several different algorithms that we have implemented to detect persistent network problems using anomalous variations analysis in real end-to-end Internet performance measurements. We also provide methods and/or guidance for how to set the user settable parameters. The measurements are based on active probes running on 40 production network paths with bottlenecks varying from 0.5Mbits/s to 1000Mbit/s. For well behaved data (no missed measurements and no very large outliers) with small seasonal changes most algorithms identify similar events. We compare the algorithms' robustness with respect to false positives and missed events especially when there are large seasonal effects in the data. Our proposed techniques cover a wide variety of network paths and traffic patterns. We also discuss the applicability of the algorithms in terms of their intuitiveness, their speed of execution as implemented, and areas of applicability. Our encouraging results compare and evaluate the accuracy of our

  9. Active alkaline traps to determine acidic-gas ratios in volcanic plumes: Sampling techniques and analytical methods

    Science.gov (United States)

    Wittmer, J.; Bobrowski, N.; Liotta, M.; Giuffrida, G.; Calabrese, S.; Platt, U.

    2014-07-01

    In situ measurements have been the basis for monitoring volcanic gas emissions for many years and—being complemented by remote sensing techniques—still play an important role to date. Concerning in situ techniques for sampling a dilute plume, an increase in accuracy and a reduction of detection limits are still necessary for most gases (e.g., CO2, SO2, HCl, HF, HBr, HI). In this work, the Raschig-Tube technique (RT) is modified and utilized for application on volcanic plumes. The theoretical and experimental absorption properties of the RT and the Drechsel bottle (DB) setups are characterized and both are applied simultaneously to the well-established Filter packs technique (FP) in the field (on Stromboli Island and Mount Etna). The comparison points out that FPs are the most practical to apply but the results are error-prone compared to RT and DB, whereas the RT results in up to 13 times higher analyte concentrations than the DB in the same sampling time. An optimization of the analytical procedure, including sample pretreatment and analysis by titration, Ion Chromatography, and Inductively Coupled Plasma Mass Spectrometry, led to a comprehensive data set covering a wide range of compounds. In particular, less abundant species were quantified more accurately and iodine was detected for the first time in Stromboli's plume. Simultaneously applying Multiaxis Differential Optical Absorption Spectroscopy (MAX-DOAS) the chemical transformation of emitted bromide into bromine monoxide (BrO) from Stromboli and Etna was determined to 3-6% and 7%, respectively, within less than 5 min after the gas release from the active vents.

  10. Advanced x-ray spectrometric techniques for characterization of nuclear materials: An overview of recent laboratory activities

    Science.gov (United States)

    Misra, N. L.

    2014-11-01

    Advancements in x-ray spectrometric techniques at different stages have made this technique suitable for characterization of nuclear materials with respect to trace/major element determinations and compositional uniformity studies. The two important features of total reflection x-ray fluorescence spectrometry: 1) requirement of very small amount of sample in ng level 2) multielement analytical capability, in addition to other features, make this technique very much suitable to nuclear materials characterization as most of the nuclear materials are radioactive and the radioactive waste generated and radiation hazards to the operator are minimum when such low amount of sample is used. Similarly advanced features of energy dispersive x-ray fluorescence e.g. better geometry for high flux, reduction in background due to application of radiation filters have made the measurements of samples sealed inside thin alkathene/PVC covers possible with good sensitivity. This approach avoids putting the instrument inside a glove box for measuring radioactive samples and makes the operation/maintenance of the instrument and analysis of the samples possible in easy and fast manner. This approach has been used for major element determinations in mixed uranium-plutonium samples. Similarly μ-XRF with brilliant and micro-focused excitation sources can be used for compositional uniformity study of reactor fuel pellets. A μ-XRF study using synchrotron light source has been made to assess the compositional uniformity of mixed uranium-thorium oxide pellets produced by different processes. This approach is simple as it does not involve any sample preparation and is non-destructive. A brief summary of such activities carried out in our laboratory in past as well as ongoing and planned for the future have been discussed in the present manuscript.

  11. Recognition of Activities of Daily Living Based on Environmental Analyses Using Audio Fingerprinting Techniques: A Systematic Review

    Science.gov (United States)

    Santos, Rui; Pombo, Nuno; Flórez-Revuelta, Francisco

    2018-01-01

    An increase in the accuracy of identification of Activities of Daily Living (ADL) is very important for different goals of Enhanced Living Environments and for Ambient Assisted Living (AAL) tasks. This increase may be achieved through identification of the surrounding environment. Although this is usually used to identify the location, ADL recognition can be improved with the identification of the sound in that particular environment. This paper reviews audio fingerprinting techniques that can be used with the acoustic data acquired from mobile devices. A comprehensive literature search was conducted in order to identify relevant English language works aimed at the identification of the environment of ADLs using data acquired with mobile devices, published between 2002 and 2017. In total, 40 studies were analyzed and selected from 115 citations. The results highlight several audio fingerprinting techniques, including Modified discrete cosine transform (MDCT), Mel-frequency cepstrum coefficients (MFCC), Principal Component Analysis (PCA), Fast Fourier Transform (FFT), Gaussian mixture models (GMM), likelihood estimation, logarithmic moduled complex lapped transform (LMCLT), support vector machine (SVM), constant Q transform (CQT), symmetric pairwise boosting (SPB), Philips robust hash (PRH), linear discriminant analysis (LDA) and discrete cosine transform (DCT). PMID:29315232

  12. The efficiency of active cycle of breathing techniques regarding the improvement the quality of life in cystic fibrosis patients

    Directory of Open Access Journals (Sweden)

    Bogdan Almăjan-Guţă

    2008-12-01

    Full Text Available Background: Physiotherapy is well known as one of the most important part of CF patient’s management. The right choice ofappropriate therapy schema will improve the life’s quality of the patients. The purpose of the study was to prove the efficiencyof Active cycle of breathing techniques at children with cystic fibrosis. The study was performed between September 2006-september 2007 and the lot of study consisted of 20 children (11 girls and 9 boys with an age range between 6 and 18 years(average 14,8 years from the records of the Cystic Fibrosis National Centre Timisoara. The results showed an improvement inall measured values: general well-being, coughing, physical signs, X-ray signs and CT, bacteriological exam, nutritional status,functional respiratory tests. The statistical briefing of data shows the fact that there are significant statistical difference (p<0,05, before and after treatment in all ventilator index. The conclusion of this study was that the chosen technique (ACTBproved to be very efficient, in improving of respiratory symptoms and ventilator parameters

  13. Design and building of a homemade sample changer for automation of the irradiation in neutron activation analysis technique

    International Nuclear Information System (INIS)

    Gago, Javier; Hernandez, Yuri; Baltuano, Oscar; Bedregal, Patricia; Lopez, Yon; Urquizo, Rafael

    2014-01-01

    Because the RP-10 research reactor operates during weekends, it was necessary to design and build a sample changer for irradiation as part of the automation process of neutron activation analysis technique. The device is formed by an aluminum turntable disk which can accommodate 19 polyethylene capsules, containing samples to be sent using the pneumatic transfer system from the laboratory to the irradiation position. The system is operate by a control switchboard to send and return capsules in a variable preset time and by two different ways, allowing the determination of short, medium and long lived radionuclides. Also another mechanism is designed called 'exchange valve' for changing travel paths (pipelines) allowing the irradiated samples to be stored for a longer time in the reactor hall. The system design has allowed complete automation of this technique, enabling the irradiation of samples without the presence of an analyst. The design, construction and operation of the device is described and presented in this article. (authors).

  14. Comparison of neutron activation analysis techniques for the determination of uranium concentrations in geological and environmental materials

    International Nuclear Information System (INIS)

    Landsberger, S.; Kapsimalis, R.

    2013-01-01

    We have described the determination of uranium in environmental, geological, and agricultural specimens by three different non-destructive nuclear methods. The effectiveness, as defined as the lower limits of detection in this work, of quantifying trace levels of bulk uranium in geological samples was evaluated for several common NAA techniques. These techniques include short-lived and medium-lived neutron activation analysis using thermal and epithermal neutrons; these results were compared with an assessment of Compton suppressed gamma-ray counting. A careful evaluation of three major (n,γ) reactions with chlorine, manganese and sodium that could impede determining low levels of uranium due to high Compton continuums was done. The evaluation of Compton suppressed passive gamma counting revealed that uranium concentrations below 50 mg kg −1 were not adequate to achieve good counting statistics using the 234m Pa the second daughter product of 238 U. -- Highlights: ► Determination of uranium concentrations in geological, environmental, and agricultural specimens. ► Use of several NAA and passive counting methods. ► Identified several key interferences. ► Use of Compton suppression to minimize effects of interferences

  15. Summary of the Effort to Use Active-induced Time Correlation Techniques to Measure the Enrichment of HEU

    Energy Technology Data Exchange (ETDEWEB)

    McConchie, Seth M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Crye, Jason Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Pena, Kirsten [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Sword, Eric [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mihalczo, John T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-30

    This document summarizes the effort to use active-induced time correlation techniques to measure the enrichment of bulk quantities of enriched uranium. In summary, these techniques use an external source to initiate fission chains, and the time distribution of the detected fission chain neutrons is sensitive to the fissile material enrichment. The number of neutrons emitted from a chain is driven by the multiplication of the item, and the enrichment is closely coupled to the multiplication of the item. As the enrichment increases (decreases), the multiplication increases (decreases) if the geometry is held constant. The time distribution of fission chain neutrons is a complex function of the enrichment and material configuration. The enrichment contributes to the probability of a subsequent fission in a chain via the likelihood of fissioning on an even-numbered isotope versus an odd-numbered isotope. The material configuration contributes to the same probability via solid angle effects for neutrons inducing subsequent fissions and the presence of any moderating material. To simplify the ability to accurately measure the enrichment, an associated particle imaging (API) D-T neutron generator and an array of plastic scintillators are used to simultaneously image the item and detect the fission chain neutrons. The image is used to significantly limit the space of enrichment and material configuration and enable the enrichment to be determined unambiguously.

  16. Methodological aspects and development of techniques for neutron activation analysis of microcomponents in materials of geologic origin

    International Nuclear Information System (INIS)

    Cohen, I.M.

    1982-01-01

    Some aspects of the activation analysis methodology applied to geological samples activated in nuclear reactors were studied, and techniques were developed for the determination of various elements in different types of matrixes, using gamma spectrometry for the measurement of the products. The consideration of the methodological aspects includes the study of the working conditions, the preparation of samples and standards, irradiations, treatment of the irradiated material, radiochemical separation and measurement. Experiments were carried out on reproducibility and errors in relation to the behaviour of the measurement equipment and that of the methods of area calculation (total area, Covell and Wasson), as well as on the effects of geometry variations on the results of the measurements, the RA-3 reactors's flux variations, and the homogeneity of the samples and standards. Also studied were: the selection of the conditions of determination, including the irradiation and decay times; the irradiation with thermal and epithermal neutrons; the measurement with the use of absorbers, and the resolution of complex peaks. Both non-destructive and radiochemical separation techniques were developed for the analysis of 5 types of geological materials. These methods were applied to the following determinations: a) In, Cd, Mn, Ga and Co in blende; b) La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu in fluorites; c) La, Ca, Eu, Tb, Yb, Se and Th in barites and celestites; d) Cu and Zn in soils. The spectral interferences or those due to nuclear reactions were studied and evaluated by mathematical calculation. (M.E.L.) [es

  17. Image-based ELISA on an activated polypropylene microtest plate--a spectrophotometer-free low cost assay technique.

    Science.gov (United States)

    Parween, Shahila; Nahar, Pradip

    2013-10-15

    In this communication, we report ELISA technique on an activated polypropylene microtest plate (APPµTP) as an illustrative example of a low cost diagnostic assay. Activated test zone in APPµTP binds a capture biomolecule through covalent linkage thereby, eliminating non-specific binding often prevalent in absorption based techniques. Efficacy of APPµTP is demonstrated by detecting human immunoglobulin G (IgG), human immunoglobulin E (IgE) and Aspergillus fumigatus antibody in patient's sera. Detection is done by taking the image of the assay solution by a desktop scanner and analyzing the color of the image. Human IgE quantification by color saturation in the image-based assay shows excellent correlation with absorbance-based assay (Pearson correlation coefficient, r=0.992). Significance of the relationship is seen from its p value which is 4.087e-11. Performance of APPµTP is also checked with respect to microtiter plate and paper-based ELISA. APPµTP can quantify an analyte as precisely as in microtiter plate with insignificant non-specific binding, a necessary prerequisite for ELISA assay. In contrast, paper-ELISA shows high non-specific binding in control sera (false positive). Finally, we have carried out ELISA steps on APPµTP by ultrasound waves on a sonicator bath and the results show that even in 8 min, it can convincingly differentiate a test sample from a control sample. In short, spectrophotometer-free image-based miniaturized ELISA on APPµTP is precise, reliable, rapid, and sensitive and could be a good substitute for conventional immunoassay procedures widely used in clinical and research laboratories. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Determination of silver, gold, zinc and copper in mineral samples by various techniques of instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Rodriguez R, N. I.; Rios M, C.; Pinedo V, J. L.; Yoho, M.; Landsberger, S.

    2015-09-01

    Using the method of instrumental neutron activation analysis, mineral exploration samples were analyzed in order to determine the concentrations of silver, gold, zinc and copper; these minerals being the main products of benefit of Tizapa and Cozamin mines. Samples were subjected to various techniques, where the type of radiation and counting methods were chosen based on the specific isotopic characteristics of each element. For calibration and determination of concentrations the comparator method was used, certified standards were subjected to the same conditions of irradiation and measurement that the prospecting samples. The irradiations were performed at the research reactor TRIGA Mark II of the University of Texas at Austin. The silver concentrations were determined by Cyclical Epithermal Neutron Activation Analysis. This method in combination with the transfer pneumatic system allowed a good analytical precision and accuracy in prospecting for silver, from photo peak measurement 657.7 keV of short half-life radionuclide 110 Ag. For the determination of gold and zinc, Epithermal Neutron Activation Analysis was used, the photo peaks analyzed corresponded to the energies 411.8 keV of radionuclide 199 Au and 438.6 keV of metastable radionuclide 69m Zn. On the other hand, copper quantification was based on the photo peak analysis of 1039.2 keV produced by the short half-life radionuclide 66 Cu, by Thermal Neutron Activation Analysis. The photo peaks measurement corresponding to gold, zinc and copper was performed using a Compton suppression system, which allowed an improvement in the signal to noise relationship, so that better detection limits and low uncertainties associated with the results were obtained. Comparing elemental concentrations the highest values in silver, zinc and copper was for samples of mine Tizapa. Regarding gold values were found in the same range for both mines. To evaluate the precision and accuracy of the methods used, various geological

  19. Advanced x-ray spectrometric techniques for characterization of nuclear materials: An overview of recent laboratory activities

    Energy Technology Data Exchange (ETDEWEB)

    Misra, N.L., E-mail: nlmisra@barc.gov.in

    2014-11-01

    Advancements in x-ray spectrometric techniques at different stages have made this technique suitable for characterization of nuclear materials with respect to trace/major element determinations and compositional uniformity studies. The two important features of total reflection x-ray fluorescence spectrometry: 1) requirement of very small amount of sample in ng level 2) multielement analytical capability, in addition to other features, make this technique very much suitable to nuclear materials characterization as most of the nuclear materials are radioactive and the radioactive waste generated and radiation hazards to the operator are minimum when such low amount of sample is used. Similarly advanced features of energy dispersive x-ray fluorescence e.g. better geometry for high flux, reduction in background due to application of radiation filters have made the measurements of samples sealed inside thin alkathene/PVC covers possible with good sensitivity. This approach avoids putting the instrument inside a glove box for measuring radioactive samples and makes the operation/maintenance of the instrument and analysis of the samples possible in easy and fast manner. This approach has been used for major element determinations in mixed uranium–plutonium samples. Similarly μ-XRF with brilliant and micro-focused excitation sources can be used for compositional uniformity study of reactor fuel pellets. A μ-XRF study using synchrotron light source has been made to assess the compositional uniformity of mixed uranium–thorium oxide pellets produced by different processes. This approach is simple as it does not involve any sample preparation and is non-destructive. A brief summary of such activities carried out in our laboratory in past as well as ongoing and planned for the future have been discussed in the present manuscript. - Highlights: • Advantages of TXRF characterization of nuclear materials are described. • The sample amount required/analytical radioactive

  20. Using a behaviour change techniques taxonomy to identify active ingredients within trials of implementation interventions for diabetes care.

    Science.gov (United States)

    Presseau, Justin; Ivers, Noah M; Newham, James J; Knittle, Keegan; Danko, Kristin J; Grimshaw, Jeremy M

    2015-04-23

    Methodological guidelines for intervention reporting emphasise describing intervention content in detail. Despite this, systematic reviews of quality improvement (QI) implementation interventions continue to be limited by a lack of clarity and detail regarding the intervention content being evaluated. We aimed to apply the recently developed Behaviour Change Techniques Taxonomy version 1 (BCTTv1) to trials of implementation interventions for managing diabetes to assess the capacity and utility of this taxonomy for characterising active ingredients. Three psychologists independently coded a random sample of 23 trials of healthcare system, provider- and/or patient-focused implementation interventions from a systematic review that included 142 such studies. Intervention content was coded using the BCTTv1, which describes 93 behaviour change techniques (BCTs) grouped within 16 categories. We supplemented the generic coding instructions within the BCTTv1 with decision rules and examples from this literature. Less than a quarter of possible BCTs within the BCTTv1 were identified. For implementation interventions targeting providers, the most commonly identified BCTs included the following: adding objects to the environment, prompts/cues, instruction on how to perform the behaviour, credible source, goal setting (outcome), feedback on outcome of behaviour, and social support (practical). For implementation interventions also targeting patients, the most commonly identified BCTs included the following: prompts/cues, instruction on how to perform the behaviour, information about health consequences, restructuring the social environment, adding objects to the environment, social support (practical), and goal setting (behaviour). The BCTTv1 mapped well onto implementation interventions directly targeting clinicians and patients and could also be used to examine the impact of system-level interventions on clinician and patient behaviour. The BCTTv1 can be used to characterise

  1. Feature-Free Activity Classification of Inertial Sensor Data With Machine Vision Techniques: Method, Development, and Evaluation.

    Science.gov (United States)

    Dominguez Veiga, Jose Juan; O'Reilly, Martin; Whelan, Darragh; Caulfield, Brian; Ward, Tomas E

    2017-08-04

    Inertial sensors are one of the most commonly used sources of data for human activity recognition (HAR) and exercise detection (ED) tasks. The time series produced by these sensors are generally analyzed through numerical methods. Machine learning techniques such as random forests or support vector machines are popular in this field for classification efforts, but they need to be supported through the isolation of a potentially large number of additionally crafted features derived from the raw data. This feature preprocessing step can involve nontrivial digital signal processing (DSP) techniques. However, in many cases, the researchers interested in this type of activity recognition problems do not possess the necessary technical background for this feature-set development. The study aimed to present a novel application of established machine vision methods to provide interested researchers with an easier entry path into the HAR and ED fields. This can be achieved by removing the need for deep DSP skills through the use of transfer learning. This can be done by using a pretrained convolutional neural network (CNN) developed for machine vision purposes for exercise classification effort. The new method should simply require researchers to generate plots of the signals that they would like to build classifiers with, store them as images, and then place them in folders according to their training label before retraining the network. We applied a CNN, an established machine vision technique, to the task of ED. Tensorflow, a high-level framework for machine learning, was used to facilitate infrastructure needs. Simple time series plots generated directly from accelerometer and gyroscope signals are used to retrain an openly available neural network (Inception), originally developed for machine vision tasks. Data from 82 healthy volunteers, performing 5 different exercises while wearing a lumbar-worn inertial measurement unit (IMU), was collected. The ability of the

  2. Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This test method covers the measurement of oxygen concentration in almost any matrix by using a 14-MeV neutron activation and direct-counting technique. Essentially, the same system may be used to determine oxygen concentrations ranging from over 50 % to about 10 g/g, or less, depending on the sample size and available 14-MeV neutron fluence rates. Note 1 - The range of analysis may be extended by using higher neutron fluence rates, larger samples, and higher counting efficiency detectors. 1.2 This test method may be used on either solid or liquid samples, provided that they can be made to conform in size, shape, and macroscopic density during irradiation and counting to a standard sample of known oxygen content. Several variants of this method have been described in the technical literature. A monograph is available which provides a comprehensive description of the principles of activation analysis using a neutron generator (1). 1.3 The values stated in either SI or inch-pound units are to be regarded...

  3. Comparison of energy expenditure by the doubly labeled water technique with energy intake, heart rate, and activity recording in man

    International Nuclear Information System (INIS)

    Schulz, S.; Westerterp, K.R.; Brueck, K.

    1989-01-01

    Average daily energy expenditure determined by the doubly labeled water technique (dlwEE) was compared in six subjects (aged 20-30 y) over 2 wk under usual living conditions; average food energy intake and energy expenditure estimated from individual diary records of physical activity. In addition, energy expenditure was estimated from 24-h heart rate recordings carried out on two randomly chosen days of the 2-wk period. The group means of the dlwEE were 1.94 +/- 0.24 (means +/- SD) times larger than resting metabolic rate (= 1.94 met) and nearly identical to the average daily energy intake (1.93 +/- 0.23 met). Energy expenditure estimated from the diaries of activity and from the 24-h heart rate recording varied between 1.67 and 2.24 met depending on the calculation procedure. The dlwEE (1.94 +/- 0.24 met) is much higher than that recently determined for sedentary people (1.25 met) and thus explains that young students may achieve body weight balance with a relatively high daily food energy intake

  4. Application of Thin Layer Activation Technique for Wear and Corrosion Studies in Stainless Steel Using Neutron Sources

    International Nuclear Information System (INIS)

    Mohamed, R.F.I.

    2013-01-01

    In this work elemental analysis for three types of stainless steel samples was performed to compare between their compositions. First the stainless samples were analyzed using Energy Dispersive X-ray (EDX) Spectrometer and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) as conventional tools for elemental analysis. Second, the samples were subjected to detailed neutron activation analysis (NAA) using Pu-Be neutron source with applying γ-rays spectroscopic measurements for the irradiated samples. The first sample was in the form of thin foils. Eight radioactive isotopes were detected in the measured spectra namely 56 Mn, 59 Fe, 58 Co, 60 Co, 24 Na, 187 W, 99 Mo and 51 Cr which resulted from different neutron reactions with this sample. The other two samples were commercial and the NAA results for one of them show that all of the elements reported in the foil sample are the same except the absence of Mo and the presence of Cr.On the other hand the third sample shows a different composition where only Mn, Fe, and Ni were identified from the measured γ- ray spectra. Stacks of irradiated stainless steal foil and pellets were measured to obtain the activity as a function of thickness using the most intense gamma ray lines of the produced radionuclides. The obtained linear activity-thickness relations for the measured radionuclides were fitted to determine the slope and the maximum thickness which can be measured by this technique. The comparison between these curves showed that the most sensitive radioisotope for detecting slight changes in the thickness is 51 Cr which is formed through the 50 Cr (n,γ) 51 Cr reaction.

  5. An evaluation of the behaviour-change techniques used on Canadian cancer centre Web sites to support physical activity behaviour for breast cancer survivors.

    Science.gov (United States)

    Sylvester, B D; Zammit, K; Fong, A J; Sabiston, C M

    2017-12-01

    Cancer centre Web sites can be a useful tool for distributing information about the benefits of physical activity for breast cancer (bca) survivors, and they hold potential for supporting health behaviour change. However, the extent to which cancer centre Web sites use evidence-based behaviour change techniques to foster physical activity behaviour among bca survivors is currently unknown. The aim of our study was to evaluate the presentation of behaviour-change techniques on Canadian cancer centre Web sites to promote physical activity behaviour for bca survivors. All Canadian cancer centre Web sites ( n = 39) were evaluated by two raters using the Coventry, Aberdeen, and London-Refined (calo-re) taxonomy of behaviour change techniques and the eEurope 2002 Quality Criteria for Health Related Websites. Descriptive statistics were calculated. The most common behaviour change techniques used on Web sites were providing information about consequences in general (80%), suggesting goal-setting behaviour (56%), and planning social support or social change (46%). Overall, Canadian cancer centre Web sites presented an average of M = 6.31 behaviour change techniques (of 40 that were coded) to help bca survivors increase their physical activity behaviour. Evidence of quality factors ranged from 90% (sites that provided evidence of readability) to 0% (sites that provided an editorial policy). Our results provide preliminary evidence that, of 40 behaviour-change techniques that were coded, fewer than 20% were used to promote physical activity behaviour to bca survivors on cancer centre Web sites, and that the most effective techniques were inconsistently used. On cancer centre Web sites, health promotion specialists could focus on emphasizing knowledge mobilization efforts using available research into behaviour-change techniques to help bca survivors increase their physical activity.

  6. Biogeosystem technique as a method to overcome the Biological and Environmental Hazards of modern Agricultural, Irrigational and Technological Activities

    Science.gov (United States)

    Kalinitchenko, Valery; Batukaev, Abdulmalik; Zinchenko, Vladimir; Zarmaev, Ali; Magomadov, Ali; Chernenko, Vladimir; Startsev, Viktor; Bakoev, Serojdin; Dikaev, Zaurbek

    2014-05-01

    Modern challenge for humanity is to replace the paradigm of nature use and overcome environmental hazards of agronomy, irrigation, industry, and other human activities in biosphere. It is utterly reasonable to stop dividing biosphere on shares - the human habitat and the environment. In the 21st century it is an outdated anthropocentrism. Contradicting himself to biosphere Humankind has the problems. The new paradigm of biosphere control by methods of Biogeosystem technique is on agenda of Humankind. Key directions of Biogeosystem technique. Tillage. Single rotary milling 20…30-50…60 sm soil layer optimizes the evolution and environment of soil, creates a favorable conditions for the rhizosphere, increases the biological productivity of biosphere by 30-50% compared to the standard agricultural practices for the period up to 40 years. Recycle material. Recycling of mineral and organic substances in soil layer of 20…30-50…60 sm in rotary milling soil processing provides wastes clean return to biosphere. Direct intrasoil substances synthesis. Environmentally friendly robot wasteless nanotechnology provides direct substances synthesis, including fertilizers, inside the soil. It eliminates the prerequisites of the wastes formation under standard industrial technologies. Selective substance's extraction from soil. Electrochemical robotic nanotechnology provides selective substances extraction from soil. The technology provides recovery, collection and subsequent safe industrial use of extracted substances out of landscape. Saving fresh water. An important task is to save fresh water in biosphere. Irrigation spends water 4-5 times more of biological requirements of plants, leads to degradation of soil and landscape. The intrasoil pulse continuous-discrete paradigm of irrigation is proposed. It provides the soil and landscape conservation, increases the biological productivity, save the fresh water up to 10-20 times. The subsurface soil rotary processing and

  7. Effective techniques for changing physical activity and healthy eating intentions and behaviour: A systematic review and meta-analysis.

    Science.gov (United States)

    McDermott, Máirtín S; Oliver, Madalyn; Iverson, Don; Sharma, Rajeev

    2016-11-01

    The primary aim of this study was to review the evidence on the impact of a change in intention on behaviour and to identify (1) behaviour change techniques (BCTs) associated with changes in intention and (2) whether the same BCTs are also associated with changes in behaviour. A systematic review was conducted to identify interventions that produced a significant change in intention and assessed the impact of this change on behaviour at a subsequent time point. Each intervention was coded using a taxonomy of BCTs targeting healthy eating and physical activity. A series of meta-regression analyses were conducted to identify effective BCTs. In total, 25 reports were included. Interventions had a medium-to-large effect on intentions (d +  = 0.64) and a small-to-medium effect (d +  = 0.41) on behaviour. One BCT, 'provide information on the consequences of behaviour in general', was significantly associated with a positive change in intention. One BCT, 'relapse prevention/coping planning', was associated with a negative change in intention. No BCTs were found to have significant positive effects on behaviour. However, one BCT, 'provide feedback on performance', was found to have a significant negative effect. BCTs aligned with social cognitive theory were found to have significantly greater positive effects on intention (d +  = 0.83 vs. 0.56, p behaviour (d +  = 0.35 vs. 0.23, ns), than those aligned with the theory of planned behaviour. Although the included studies support the notion that a change in intention is associated with a change in behaviour, this review failed to produce evidence on how to facilitate behaviour change through a change in intention. Larger meta-analyses incorporating interventions targeting a broader range of behaviours may be warranted. Statement of contribution What is already known on this subject? Prior research on the causal relationship between intention and behaviour has produced mixed findings. Further experimental research to

  8. A code to determine the energy distribution, the incident energy and the flux of a beam of light ions into a stack of foils

    International Nuclear Information System (INIS)

    Sonzogni, A.A.; Romo, A.S.M.A.; Frosch, W.R.; Nassiff, S.J.

    1992-01-01

    The stacked-foil technique is one of the most used methods to obtain excitation functions of nuclear reactions using light ions as projectiles. The purpose of this program is the calculation of the energy of the beam in the stack, as well as to obtain the incident energy and the flux of the beam by using monitor excitation functions. (orig.)

  9. IPN - Orsay Report of activity 1998-1999. General activities. Technical Development; IPN - Orsay. Rapport d'activite 1998-1999. Activites generales. Recherches techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pouthas, Joel; Hutin, Christiane; Rivenez, Jean-Philippe [eds.] [Institut de Physique Nucleaire, 91406 Orsay cedex (France)

    2000-01-12

    The main direction of research of the Institute of Nuclear Physics at Orsay was the physics of nuclei far from stability line. The high value of the results obtained is due mainly to development of MUST detectors, LISE3 and SPEG spectrometers and use of large size germanium crystals. Important findings in radioactivity, elastic and inelastic scattering, in transfer reactions (in {sup 11}Be for the first time), Coulomb excitation and use of on-line gamma labelling technique, especially applied to neutron rich nuclei around N=20 and 28, are mentioned. Collaborations to projects like EXOGAM, VAMOS, LISE2000 at GANIL as well as the studies on nuclei around {sup 132}Sn at ISOLDE are reviewed. Very promising appear the results obtained with hot nuclei, produced in heavy ion collisions at 30-200 MeV/n and with the new nuclear species produced in relativistic heavy ion collisions. The studies on hadrons in nuclear matter conducted at CERN LHC and GSI at Darmstadt concerned mainly the quark-gluon plasma. The results on J/{psi} suppression obtained by NA50 collaboration appear to signal this state. The studies on hadron structure with the GRAAL experiment at ESRF opened the domain of strange baryon resonances. This first part of the IPNO Report of activity on 1998-1999 has the following content: 1. Accelerators. 2. Targets, sources and injectors. 3. Detectors and related instrumentation. 4. Electronics and data acquisition. In the first chapter there are presented works on R and D on superconducting RF cavities, the contributions to the LHC and IPHI projects, the status of Tandem accelerator and the activities on techniques associated with accelerators. The second chapter deals with the SELPOM polarized electron source, the CIRIL electron irradiator, the production of neutron rich radioactive atoms at PARRNE 1 and 2, the SILFRA laser ion source and the SIHL stable ion separator, HD polarized targets and TANCREDE project. The chapter three reports studies on the chambers of

  10. Determination of Methylmercury Traces in Biological Matrix: Chemical Extraction and Nuclear Quantification with the Neutron Activation Analysis Technique

    International Nuclear Information System (INIS)

    Soldati, A.L.

    2002-01-01

    Mercury is present in the environment as a result of the human and natural activities.The total amount of Hg present in the biosphere has been incremented three times since the industrial era, and now it is affecting in a global sense all the ecosystem.One of the main entrance of Hg in the human diet is the consumption of fish and other marine creatures.Most of the ingested Hg is mono methylmercury (MeHg), which is one of the most toxic forms in which this element could be found because it crosses membranes.Since the toxicity levels are low, the determination of concentrations of total Hg and Me Hg require very careful sampling, sample conditioning and analytical procedures to prevent either losses or contamination, or the degradation of the Hg species.In this work, we implemented a chemical Me Hg extraction procedure, using a ionic exchange resin, with three different types of fish tissue: muscle, liver and hepato pancreas.After Me Hg extraction, the determination and quantification was made by Instrumental Neutron Activation Analysis, by measuring the 197 Au, y el 203 Tl deexcitation s, created through the radioactive decay of the isotopes 197 Hg y 203 Hg.The influence of several parameters on the overall extraction process, such as velocity of passage through the ionic exchange column and the acid concentration used in the extraction was evaluated.Regarding the INAA determinations, a choice was made for the irradiation, decay and counting times, neutron and gamma doses, and the counting geometry The detection limit found for this technique (dry weight) is 140 pg MeHg/g. The Hg contents of the muscle samples were measured with the 279 keV emission of the product of the 202 Hg(n,g) 203 Hg reaction, with a recovery of (100 ± 13)%. Liver and Hepato pancreas samples were measured with the 77 keV gamma emission of the 197 Hg, checking this result with the 67 y 69 keV X emissions from the same isotope.The liver samples needed an extra vacuum filtering process during

  11. A comparative study of two advanced spraying techniques for the deposition of biologically active enzyme coatings onto bone-substituting implants

    International Nuclear Information System (INIS)

    Jonge, Lise T. de; Ju, J.; Leeuwenburgh, S.C.G.; Yamagata, Y.; Higuchi, T.; Wolke, J.G.C.; Inoue, K.; Jansen, J.A.

    2010-01-01

    Surface modification of implant materials with biomolecule coatings is of high importance to improve implant fixation in bone tissue. In the current study, we present two techniques for the deposition of biologically active enzyme coatings onto implant materials. The well-established thin film ElectroSpray Deposition (ESD) technique was compared with the SAW-ED technique that combines high-frequency Surface Acoustic Wave atomization with Electrostatic Deposition. By immobilizing the enzyme alkaline phosphatase (ALP) onto implant surfaces, the influence of both SAW-ED and ESD deposition parameters on ALP deposition efficiency and ALP biological activity was investigated. ALP coatings with preserved enzyme activity were deposited by means of both the SAW-ED and ESD technique. The advantages of SAW-ED over ESD include the possibility to spray highly conductive protein solutions, and the 60-times faster deposition rate. Furthermore, significantly higher deposition efficiencies were observed for the SAW-ED technique compared to ESD. Generally, it was shown that protein inactivation is highly dependent on both droplet dehydration and the applied electrical field strength. The current study shows that SAW-ED is a versatile and flexible technique for the fabrication of functionally active biomolecule coatings.

  12. Elemental activation analysis with decay and prompt gamma ray techniques, using isotopic neutron sources and a nuclear research reactor. Part of a coordinated programme on nuclear-based techniques in geology and mineral prospecting

    International Nuclear Information System (INIS)

    El-Kady, A.A.

    1979-05-01

    This is to review the research activities carried out through the IAEA research Project 1697/RB ''Elemental activation analysis with decay and prompt gamma ray techniques, using isotopic neutron sources and the nuclear research reactor. The programme of work includes: a) Development of decay and prompt gamma ray activation techniques for mineral exploration. b) Development of epithermal NAA in addition to thermal NAA especially for gold ore. c) Development of non-destructive insitu elemental analysis with decay and prompt gamma ray techniques using isotopic neutron sources. A joint programme has been established with the Egyptian Geological Surrey and Mining Authority for using nuclear techniques in evaluating gold prospects of several ancient gold mines and investigating several tin-tantalum deposits, which were discovered over the last few years. Two sources of neutrons were used for irradiation, one of the dry channels of the two megawatts research reactor, ET-RR-1 for laboratory studies, and a Pu-Be neutron source in paraffin assembly for possible insitu work

  13. A comparison of high and low degree of freedom alignment techniques in functional PET brain activation experiments)

    International Nuclear Information System (INIS)

    Sonkkila, C.P.; Egan, G.F.; Watson, J.D.G.; Wenderoth, P.

    1998-01-01

    Full text: Cognitive activation studies in PET commonly utilise intersubject alignment as a preprocessing stage before images are compared. The accepted technique included in statistical parametric mapping (SPM) an analysis package developed by Friston et al, uses a 12 'degree of freedom' (d.o.f.) affine transformation, while a more complicated non-linear approach has recently been developed by Woods et al, but it necessitates the use of higher resolution magnetic resonance images to give sufficient information to use the high degree of freedom nonlinear alignment. This study seeks to show the differences between using the low degree of freedom alignment approach in SPM compared to that of Woods. As an example, a group of 8 normal subjects are asked to perform a complex visual paradigm during a series of PET scans designed to be sensitive to changes in blood flow. Structural MR images are also acquired for each subject. The resulting scans are then analysed with two methods: One where all images are aligned using SPM and the PET images. The second method utilises Woods' algorithm (a 5th order polynomial fit with 168 d.o.f.) and the MR images. SPM is then used to assess regions of significant change in blood flow across the group for both methods, and the results compared. When using the PET images for alignment purposes, the maximal probability for rejecting the null hypothesis of no change in regional blood flow was p = 0.471 (Talairach atlas coordinate 10 -74 -8) while utilising the MR images gives p = 0.913 for the same region. Note that to reach higher statistical significance ( eg p > 0.95 ) more subjects would be included in the study. It was concluded that there is considerable evidence to show that using MR images and Woods' nonlinear alignment gives higher statistical power than using PET images only and a low degree of freedom alignment method for resolving changes in regional blood flow in cognitive activation experiments

  14. Assessment of inhalation and ingestion doses from exposure to radon gas using passive and active detecting techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, A. H.; Jafaar, M. S. [Universiti Sains Malaysia, 11800 USM, Penang (Malaysia)

    2011-07-01

    The aim of this study was to assess an environmental hazard of radon exhalation rate from the samples of soil and drinking water in selected locations in Iraqi Kurdistan, passive (CR-39NTDs) and active (RAD7) detecting techniques has been employed. Long and short term measurements of emitted radon concentrations were estimated for 124 houses. High and lower radon concentration in soil samples was in the cities of Hajyawa and Er. Tyrawa, respectively. Moreover, for drinking water, high and low radon concentration was in the cities of Similan and Kelak, respectively. A comparison between our results with that mentioned in international reports had been done. Average annual dose equivalent to the bronchial epithelium, stomach and whole body in the cities of Kelak and Similan are estimated, and it was varied from 0.04{+-}0.01 mSv to 0.547{+-}0.018 mSv, (2.832{+-}0.22)x10{sup -5} to (11.972{+-}2.09)x10{sup -5} mSv, and (0.056 {+-}0.01) x10{sup -5} to (0.239{+-}0.01)x10{sup -5} mSv, respectively. This indicated that the effects of dissolved radon on the bronchial epithelium are much than on the stomach and whole body. (authors)

  15. Detection of active noise control on the standard motorcycle exhaust Supra X 125 D using PVC pipe technique form Y

    Science.gov (United States)

    Isranuri, I.; Alfisyahrin; Nasution, A. R.

    2018-02-01

    This detection aims to obtain noise reduction on the supra X 125D motorcycle exhaust by using the Active Noise Control Method. The technique is done using a Y-shaped PVC pipe to be bolted on the exhaust, which then branch Y PVC is placed loudspeaker with impermeable conditions. The function of this loudspeaker is as a secondary noise to counter the primary noise of the sound of exhaust motorcycle Supra X 125D. The sound generator in this study is the ISD 4004 module, which serves to generate noise to counter the source noise. How this ISD 4004 module works is by recording source noise then recording the source noise and then reversed the phase 180° by phase reversing circuit. So that, the noise generated by the sound generator will hit the source noise and encounter or such as addition of two different phase of sound will result in noise reduction when detected at the end of the Y-shaped PVC pipe. Inverted phase reversed using feed-back resistor 1 kΩ and 2 kΩ input resistors, 16V capacitor 2500μf and as amplifier using ICL 7660 and TL 702 CP. Test results on the highest 1000 rpm rotation engine speed on the Z axis of 2 dB, and at the highest 2000 rpm rotation engine speed also occurs on the Z axis of 1.5 dB.

  16. Use of an Electrochemical Split Cell Technique to Evaluate the Influence of Shewanella oneidensis Activities on Corrosion of Carbon Steel.

    Directory of Open Access Journals (Sweden)

    Robert Bertram Miller

    Full Text Available Microbially induced corrosion (MIC is a complex problem that affects various industries. Several techniques have been developed to monitor corrosion and elucidate corrosion mechanisms, including microbiological processes that induce metal deterioration. We used zero resistance ammetry (ZRA in a split chamber configuration to evaluate the effects of the facultatively anaerobic Fe(III reducing bacterium Shewanella oneidensis MR-1 on the corrosion of UNS G10180 carbon steel. We show that activities of S. oneidensis inhibit corrosion of steel with which that organism has direct contact. However, when a carbon steel coupon in contact with S. oneidensis was electrically connected to a second coupon that was free of biofilm (in separate chambers of the split chamber assembly, ZRA-based measurements indicated that current moved from the S. oneidensis-containing chamber to the cell-free chamber. This electron transfer enhanced the O2 reduction reaction on the coupon deployed in the cell free chamber, and consequently, enhanced oxidation and corrosion of that electrode. Our results illustrate a novel mechanism for MIC in cases where metal surfaces are heterogeneously covered by biofilms.

  17. Percent voluntary inactivation and peak force predictions with the interpolated twitch technique in individuals with high ability of voluntary activation

    International Nuclear Information System (INIS)

    Herda, Trent J; Walter, Ashley A; Hoge, Katherine M; Stout, Jeffrey R; Costa, Pablo B; Ryan, Eric D; Cramer, Joel T

    2011-01-01

    The purpose of this study was to examine the sensitivity and peak force prediction capability of the interpolated twitch technique (ITT) performed during submaximal and maximal voluntary contractions (MVCs) in subjects with the ability to maximally activate their plantar flexors. Twelve subjects performed two MVCs and nine submaximal contractions with the ITT method to calculate percent voluntary inactivation (%VI). Additionally, two MVCs were performed without the ITT. Polynomial models (linear, quadratic and cubic) were applied to the 10–90% VI and 40–90% VI versus force relationships to predict force. Peak force from the ITT MVC was 6.7% less than peak force from the MVC without the ITT. Fifty-eight percent of the 10–90% VI versus force relationships were best fit with nonlinear models; however, all 40–90% VI versus force relationships were best fit with linear models. Regardless of the polynomial model or the contraction intensities used to predict force, all models underestimated the actual force from 22% to 28%. There was low sensitivity of the ITT method at high contraction intensities and the predicted force from polynomial models significantly underestimated the actual force. Caution is warranted when interpreting the % VI at high contraction intensities and predicted peak force from submaximal contractions

  18. Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

    Energy Technology Data Exchange (ETDEWEB)

    Grogan, Brandon R., E-mail: groganbr@ornl.gov; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

    2013-12-01

    The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system.

  19. Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

    International Nuclear Information System (INIS)

    Grogan, Brandon R.; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

    2013-01-01

    The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system

  20. Determination of Diffusion Coefficients and Activation Energy of Selected Organic Liquids using Reversed-Flow Gas Chromatographic Technique

    International Nuclear Information System (INIS)

    Khalisanni Khalid; Rashid Atta Khan; Sharifuddin Mohd Zain

    2012-01-01

    Evaporation of vaporize organic liquid has ecological consequences when the compounds are introduced into both freshwater and marine environments through industrial effluents, or introduced directly into the air from industrial unit processes such as bioreactors and cooling towers. In such cases, a rapid and simple method are needed to measure physicochemical properties of the organic liquids. The Reversed-Flow Gas Chromatography (RF-GC) sampling technique is an easy, fast and accurate procedure. It was used to measure the diffusion coefficients of vapors from liquid into a carrier gas and at the same time to determine the rate coefficients for the evaporation of the respective liquid. The mathematical expression describing the elution curves of the samples peaks was derived and used to calculate the respective parameters for the selected liquid pollutants selected such as methanol, ethanol, 1-propanol, 1-butanol, n-pentane, n-hexane, n-heptane and n-hexadecane, evaporating into the carrier gas of nitrogen. The values of diffusion coefficients found were compared with those calculated theoretically or reported in the literature. The values of evaporation rate were used to determine the activation energy of respective samples using Arrhenius equation. An interesting finding of this work is by using an alternative mathematical analysis based on equilibrium at the liquid-gas interphase, the comparison leads to profound agreement between theoretical values of diffusion coefficients and experimental evidence. (author)

  1. Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique

    Energy Technology Data Exchange (ETDEWEB)

    Raoufi, M., E-mail: raoufi@iust.ac.ir [School of Metallurgical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Mirdamadi, Sh. [School of Metallurgical Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Mahboubi, F. [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Ahangarani, Sh. [Advanced Materials and Renewable Energies Dep., Iranian Research Organization for Science and Technology (Iran, Islamic Republic of); Mahdipoor, M.S. [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Elmkhah, H. [Department of Metallurgical Engineering, Tarbiat Modares University, Tehran (Iran, Islamic Republic of)

    2012-08-01

    Titanium based alloys are used extensively for improving wear properties of different parts due to their high hardness contents. Titanium nitride (TiN) is among these coatings which can be deposited on surface using various techniques such as CVD, PVD and PACVD. Their weak interface with substrate is one major drawback which can increase the total wear in spite of favorite wear behavior of TiN. Disc shaped samples from AISI H13 (DIN 1.2344) steel were prepared in this study. Single TiN coating was deposited on some of them while others have experienced a TiN deposition by active screen plasma nitriding (ASPN). Hardness at the surface and depth of samples was measured through Vickers micro hardness test which revealed 1810 Hv hardness as the maximum values for a dual-layered ASPN-TiN. Pin-on-disc wear test was done in order to study the wear mechanism. In this regard, the wear behavior of samples was investigated against pins from 100Cr6 (Din 1.3505) bearing steel and tungsten carbide-cobalt (WC-Co) steel. It was evidenced that the dual-layer ASPN-TiN coating has shown the least weight loss with the best wearing behavior because of its high hardness values, stable interface and acceptable resistance against peeling during wearing period.

  2. Measurement of cross-sections for produced radionuclide in proton induced reactions on natHf up to 45 MeV

    International Nuclear Information System (INIS)

    Shahid, Muhammad; Kim, Kwangsoo; Naik, Haladhara; Kim, Guinyun

    2014-01-01

    We measured production cross-sections of Hf, Lu, and Ta radioisotopes from proton-induced reaction of nat Hf by using a stacked-foil activation and off-line γ-ray spectrometric technique at the MC-50 cyclotron of the Korea Institute of Radiological and Medical Sciences. The results were compared with the reported experimental data as well as the theoretical calculations based on the TALYS 1.4 code. The present results in the energy region from the threshold energy to 45 MeV are in general good agreement with the other experimental data and calculated results. The present experimental results will play an important role in enrichment of the literature data base for proton-induced reactions on natural hafnium leading to various applications. Some of the investigated radionuclides (e.g. 177g Lu) have remarkable applications in the field of nuclear medicine, a thin layer activation analysis, and a trace element analysis

  3. SOME METHODOLOGICAL TECHNIQUES OF ACTIVATION OF THE COGNITIVE INTEREST IN BIOLOGY CLASSES OF STUDENTS OF THE MEDICAL TECHNICAL PROFILE

    Directory of Open Access Journals (Sweden)

    V. N. Baranov

    2014-01-01

    Full Text Available Research objective. Identification of possibility of the modern pedagogical receptions in development of cognitive interest in students of a medico-technical profile at biology lessons.Research techniques. The theoretical: the analysis of psychology and pedagogical and methodical literature on a research problem, the teoretiko-methodical analysis of a studied problem, development of methodical bases of its realization in biology training; approach to carrying out a lecture and practical training in biology with bionics elements. The empirical – supervision, conversation, questioning, manufacture of multimedia presentations for carrying out an interactive lecture and practical training and the analysis of results of work with them.Material and methods. Students of the 1st course being trained in the direction of preparation 201000.62 – “Biotechnical systems and technologies” (bachelor degree.Results. It is possible to carry the following to the positive moments: within interactive lecture there is a tendency to motivation change to educational activity with external on the internal; the pedagogical receptions based on interactivity, allow to keep attention of audience easier; using problem situations, it was possible to involve pupils in educational activity selectively; when using considered approach process of communication with audience gains more natural character, approaching developing relationship in teacher student system to cooperation.It is possible to carry the next moments to the negative: process of teaching becomes more intense, deman­ding from the teacher of larger concentration on a training material, and constant readiness and ability to conduct discussion; the interactive format of giving of a training material sometimes possesses smaller informational characteristics; students are not always ready to such format of educational activity that is often shown in inability to carry on the free dialogue, inability to

  4. Application of synchrotron-radiation-based x-ray microprobe techniques for the analysis of recombination activity of metals precipitated at Si/SiGe misfit dislocations

    CERN Document Server

    Vyvenko, O F; Istratov, A A; Weber, E R; Kittler, M; Seifert, W

    2002-01-01

    In this study we report application of synchrotron-radiation-based x-ray microprobe techniques (the x-ray-beam-induced current (XBIC) and x-ray fluorescence (mu-XRF) methods) to the analysis of the recombination activity and space distribution of copper and iron in the vicinity of dislocations in silicon/silicon-germanium structures. A combination of these two techniques enables one to study the chemical nature of the defects and impurities and their recombination activity in situ and to map metal clusters with a micron-scale resolution. XRF analysis revealed that copper formed clearly distinguishable precipitates along the misfit dislocations. A proportional dependence between the XBIC contrast and the number of copper atoms in the precipitates was established. In hydrogen-passivated iron-contaminated samples we observed clusters of iron precipitates which had no recombination activity detectable by the XBIC technique as well as iron clusters which were not completely passivated.

  5. Use of the Taguchi method for biomechanical comparison of flexor-tendon-repair techniques to allow immediate active flexion. A new method of analysis and optimization of technique to improve the quality of the repair.

    Science.gov (United States)

    Singer, G; Ebramzadeh, E; Jones, N F; Meals, R

    1998-10-01

    The current trend toward early active flexion after repair of the flexor tendons necessitates a stronger repair than that provided by a modified Kessler technique with use of 4-0 nylon suture. The purpose of the current study was to determine, with use of the Taguchi method of analysis, the strongest and most consistent repair of the flexor tendons. Flexor tendons were obtained from fresh-frozen hands of human cadavera. Eight flexor tendons initially were repaired with the modified Kessler technique with use of 4-0 nylon core suture and 6-0 nylon epitenon suture. A test matrix was used to analyze a total of twenty variables in sixty-four tests. These variables included eight techniques for core-suture repair, four types of core suture, two sizes of core suture, four techniques for suture of the epitenon, and two distances from the repair site for placement of the core suture. After each repair, the specimens were mounted in a servohydraulic mechanical testing machine for tension-testing to failure. The optimum combination of variables was determined, with the Taguchi method, to be an augmented Becker technique with use of 3-0 Mersilene core suture, placed 0.75 centimeter from the cut edge with volar epitenon suture. The four-strand, double modified Kessler technique provided the second strongest repair. Five tendons that had been repaired with use of the optimum combination then were tested and compared with tendons that had been repaired with the standard modified Kessler technique. With the optimum combination of variables, the strength of the repair improved from a mean (and standard deviation) of 17.2 +/- 2.9 to 128 +/- 5.6 newtons, and the stiffness improved from a mean of 4.6 to 16.2 newtons per millimeter.

  6. Using a Concept Mapping Tool with a Photograph Association Technique (CoMPAT) to Elicit Children's Ideas about Microbial Activity

    Science.gov (United States)

    Byrne, Jenny; Grace, Marcus

    2010-01-01

    Concept mapping is a technique used to provide a visual representation of an individual's ideas about a concept or set of related concepts. This paper describes a concept mapping tool using a photograph association technique (CoMPAT) that is considered to be a novel way of eliciting children's ideas. What children at 11 years of age know about…

  7. Comparison of different characterization techniques of hydro-treating catalysts - structure-activity relation; Comparaison de differentes techniques de caracterisations de catalyseurs d'hydrotraitement - relation structure-activite

    Energy Technology Data Exchange (ETDEWEB)

    Lelias, M.A.; Van Gestel, J.; Mauge, F. [Ecole Nationale Superieure d' Inegniers de Caen (ENSICAEN), Lab. Catalyse et Spectroehimie, UMR CNRS, 14 - Caen (France); Rob van, Veen [Shell Research and Technology Centre, CM Amsterdam (Netherlands)

    2004-07-01

    In order to improve the performances of the HDS processes, it is necessary to have a better knowledge of the catalysts used in hydro-treating. It is known that the active phase in HDS is the MoS{sub 2} phase which has been promoted by cobalt. But the quantification of the number of the active sites remains a problem. In order to quantify these sites, different techniques of characterization are used as the Moessbauer spectroscopy, the electronic microscopy or the infrared spectroscopy of probe molecules such as NO or CO. Literature gives different results for the number of active sites of catalysts prepared by approaching procedures. The aim of this work is then to determine if these differences are due to preparation or sulfurization modes which are non similar or inhering to the potentialities of the different techniques. The preparation of different catalysts CoMo is reported as well as the different modes of the sulfurization carried out. For these different catalysts and activation modes, the spectroscopic characterizations have been compared to the reactivity on model molecules (HDS of thiophene and of DBT) in order to establish structure-activity relations. (O.M.)

  8. Alpha induced reactions on 114Cd and 116Cd: An experimental study of excitation functions

    International Nuclear Information System (INIS)

    Adam Rebeles, R.; Hermanne, A.; Winkel, P. van den; Tarkanyi, F.; Takacs, S.; Daraban, L.

    2008-01-01

    Excitation functions of alpha induced reactions on enriched 114 Cd and 116 Cd targets, leading to the formation of the 117m,119m Sn, 114m 1 ,115m,116m,117m,g In, 115g Cd isotopes, were studied by the stacked foil activation technique. Reaction cross-sections were measured from their respective thresholds up to E α = 38.9 MeV. Quantification of induced isotopes has been made by gamma and X-ray spectrometry. The experimental cross-sections are compared, where available, with values reported previously in literature. Thick target yield for the medically important radionuclide 117m Sn is calculated based on discrete values of measured cross-sections.

  9. Measurement of excitation functions in proton induced reactions on natural copper from their threshold to 43 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Shahid, Muhammad; Kim, Kwangsoo [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Naik, Haladhara [Radiochemistry Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Zaman, Muhammad [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Yang, Sung-Chul [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Nuclear Data Center, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of); Kim, Guinyun, E-mail: gnkim@knu.ac.kr [Department of Physics, Kyungpook National University, Daegu 702-701 (Korea, Republic of)

    2015-01-01

    We have measured the production cross-sections of the residual radionuclides from proton-induced reactions of {sup nat}Cu by using a stacked-foil activation and off-line γ-ray spectrometric technique in the energy range from their respective threshold to 43 MeV at the MC-50 cyclotron of the Korea Institute of Radiological and Medical Sciences. The measured results were compared with the earlier reported data as well as with the theoretical values obtained from the TENDL-2013 library based on the TALYS 1.6 code. The integral yields for thick target of the investigated radio-nuclides were calculated from the measured excitation function and the stopping power of {sup nat}Cu.

  10. Excitation functions of radionuclides produced by proton induced reactions on gadolinium targets

    International Nuclear Information System (INIS)

    Challana, M.B.; Comsana, M.N.H.; Moawadb, G.S.; Abou-Zeid, M.A.

    2008-01-01

    Cross section study for proton induced reaction on natural Gadolinium targets were performed. Excitation functions for the reactions n atGd(p,x) 152m+g , 154m,154g Tb from threshold up to E p = 18 MeV have been measured employing the stacked foil activation technique, and using high resolution HPGe gamma spectrometry. Utilizing the simultaneous measurement of the excitation function of n atCu(p,x) 62 Zn, n atCu(p,x) 63 Zn, and n atCu(p,x) 65 Zn as monitor reactions. The theoretical analysis of the excitation functions has been done employing both ALICE-91 and EMPIRE-II codes. In general, theoretical calculations agree well with the experimental data. A significant contribution of pre-equilibrium component has been observed at these energies

  11. Production of radio-gold {sup 199}Au for diagnostic and therapeutic applications

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin, E-mail: mu-khandaker@um.edu.my; Kassim, Hasan Abu, E-mail: hasanak@um.edu.my [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu, E-mail: haba@riken.jp [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan)

    2016-01-22

    Production cross-sections of the {sup nat}Pt(d,x){sup 199}Au reactions have been measured from a 24-MeV deuteron energy down to the threshold by using a stacked-foil activation technique combined with HPGe γ-ray spectrometry. Only a partial agreement is obtained with the existing literature data. Theoretical data extracted from the TENDL-2013 library shows large discrepancy with the measured ones. Physical thick target yield for the {sup 199}Au radionuclide was deduced using the measured cross-sections, and found a general agreement with the directly measured yield available in the literature. This study reveals that a low deuteron energy (<15 MeV) cyclotron and an enriched {sup 198}Pt (100%) target could be used to obtain {sup 199}Au in no carrier added form.

  12. Measurement and analysis of $\\alpha$ particle induced reactions on yttrium

    CERN Document Server

    Singh, N L; Chintalapudi, S N

    2000-01-01

    Excitation functions for /sup 89/Y[( alpha ,3n); ( alpha ,4n); ( alpha , p3n); ( alpha , alpha n); ( alpha , alpha 2n)] reactions were measured up to 50 MeV using stacked foil activation technique and HPGe gamma ray spectroscopy method. The experimental data were compared with calculations considering equilibrium as well as preequilibrium reactions according to the hybrid model of Blann (ALICE/90). For ( alpha , xnyp) type of reactions, the precompound contributions are described by the model. There seems to be indications of direct inelastic scattering effects in ( alpha , alpha xn) type of reactions. To the best of our knowledge, the excitation functions for ( alpha ,4n), ( alpha , p3n), ( alpha , alpha n) and ( alpha , alpha 2n) reactions were measured for the first time. (23 refs).

  13. {alpha}-particle induced reactions on yttrium and terbium

    Energy Technology Data Exchange (ETDEWEB)

    Mukherjee, S.; Kumar, B.B. [School of Studies in Physics, Vikram University, Ujjain-456010 (India); Rashid, M.H. [Variable Energy Cyclotron Center, 1/AF, Bidhan Nagar, Calcutta (India); Chintalapudi, S.N. [Inter-University Consortium for DAE Facilities, 3/LB, Bidhan Nagar, Calcutta (India)

    1997-05-01

    The stacked foil activation technique has been employed for the investigation of {alpha}-particle induced reactions on the target elements yttrium and terbium up to 50 MeV. Six excitation functions for the ({alpha},xn) type of reactions were studied using high-resolution HPGe {gamma}-ray spectroscopy. A comparison with Blann{close_quote}s geometric dependent hybrid model has been made using the initial exciton number n{sub 0}=4(4p0h) and n{sub 0}=5(5p0h). A broad general agreement is observed between the experimental results and theoretical predictions with an initial exciton number n{sub 0}=4(4p0h). {copyright} {ital 1997} {ital The American Physical Society}

  14. Measurement and analysis of alpha particle induced reactions on yttrium

    Energy Technology Data Exchange (ETDEWEB)

    Singh, N.L.; Gadkari, M.S. [Baroda Univ. (India). Dept. of Physics; Chintalapudi, S.N. [IUC-DAEF Calcutta Centre, Calcutta (India)

    2000-05-01

    Excitation functions for {sup 89}Y[({alpha},3n);({alpha},4n);({alpha},p3n);({alpha},{alpha}n);({alpha},{alpha}2n)] reactions were measured up to 50 MeV using stacked foil activation technique and HPGe gamma ray spectroscopy method. The experimental data were compared with calculations considering equilibrium as well as preequilibrium reactions according to the hybrid model of Blann (ALICE/90). For ({alpha},xnyp) type of reactions, the precompound contributions are described by the model. There seems to be indications of direct inelastic scattering effects in ({alpha},{alpha}xn) type of reactions. To the best of our knowledge, the excitation functions for ({alpha},4n), ({alpha},p3n), ({alpha},{alpha}n) and ({alpha},{alpha}2n) reactions were measured for the first time. (orig.)

  15. α-particle induced reactions on yttrium and terbium

    International Nuclear Information System (INIS)

    Mukherjee, S.; Kumar, B.B.; Rashid, M.H.; Chintalapudi, S.N.

    1997-01-01

    The stacked foil activation technique has been employed for the investigation of α-particle induced reactions on the target elements yttrium and terbium up to 50 MeV. Six excitation functions for the (α,xn) type of reactions were studied using high-resolution HPGe γ-ray spectroscopy. A comparison with Blann close-quote s geometric dependent hybrid model has been made using the initial exciton number n 0 =4(4p0h) and n 0 =5(5p0h). A broad general agreement is observed between the experimental results and theoretical predictions with an initial exciton number n 0 =4(4p0h). copyright 1997 The American Physical Society

  16. New measurements of excitation functions of {sup 186}W(p,x) nuclear reactions up to 65 MeV. Production of a {sup 178}W/{sup 178m}Ta generator

    Energy Technology Data Exchange (ETDEWEB)

    Tárkányi, F.; Ditrói, F.; Takács, S. [Institute of Nuclear Research (ATOMKI), Debrecen (Hungary); Hermanne, A., E-mail: aherman@vub.ac.be [Cyclotron Department, Vrije Universiteit Brussel, (VUB), Brussels (Belgium)

    2017-01-15

    New experimental excitation functions for proton induced reactions on {sup nat}W are presented in the 32–65 MeV energy range. The cross-sections for {sup nat}W(p,xn){sup 186,184m,184g,183,} {sup 182m,182g,181}Re, {sup nat}W(p,x){sup 178}W{sup ,} {sup nat}W(p,x){sup 183,182,} {sup 180m,} {sup 177,176,175}Ta, {sup 175}Hf and {sup 177}Lu were measured via an activation method by using a stacked-foil irradiation technique and high resolution gamma-ray spectroscopy. The results were compared with predicted values obtained with the nuclear reaction code TALYS (results taken from the TENDL 2014 and TENDL 2015 on-line libraries). Production routes of the medically relevant radionuclides {sup 186}Re, the {sup 178}W → {sup 178}Ta generator and {sup 181}W are discussed.

  17. Formation of short-lived positron emitters in reactions of protons of energies up to 200 MeV with the target elements carbon, nitrogen and oxygen

    CERN Document Server

    Kettern, K; Qaim, S M; Shubin, Yu N; Steyn, G F; Van der Walt, T N; 10.1016/j.apradiso.2004.02.007

    2004-01-01

    Excitation functions were measured by the stacked-foil technique for proton induced reactions on carbon, nitrogen and oxygen leading to the formation of the short-lived positron emitters /sup 11/C (T/sub 1 /2/=20.38 min) and /sup 13/N (T/sub 1/2/=9.96 min). The energy region covered extended up to 200 MeV. The product activity was measured non-destructively via gamma -ray spectrometry. A careful decay curve analysis of the positron annihilation radiation was invariably performed. The experimental results were compared with theoretical data obtained using the modified hybrid nuclear model code ALICE-IPPE for intermediate energies. The agreement was found to be generally satisfactory. The data are of importance in proton therapy.

  18. Measurements of deuteron-induced reaction cross-sections on natural nickel up to 24 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Usman, Ahmed Rufai [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Department of Physics, Umaru Musa Yar’adua University, Katsina (Nigeria); Khandaker, Mayeen Uddin, E-mail: mu_khandaker@yahoo.com [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu; Murakami, Masashi [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan); Otuka, Naohiko [Nuclear Data Section, Division of Physical and Chemical Sciences, Department of Nuclear Sciences and Applications, International Atomic Energy Agency, A-1400 Vienna (Austria)

    2016-02-01

    Deuteron-induced cross-sections of the {sup nat}Ni(d,x){sup 55–58,60}Co, {sup 57}Ni, {sup 52g,54}Mn and {sup 61}Cu reactions were measured from the respective threshold energies to 24 MeV by using a stacked-foil activation technique combined with HPGe γ-ray spectrometry. The results were compared with the available experimental data and also with the evaluated data in the TENDL-2014 library. Present results show a reasonable agreement with the recently reported experimental data while a partial agreement is found with the evaluated data. The results are expected to further enrich the experimental database and to understand the discrepancies among the previous measurements. The {sup nat}Ni(d,x){sup 61}Cu cross-sections recommended by the IAEA overestimate recent experimental ones, and their upgrade has been proposed.

  19. Production cross-sections of long-lived radionuclides in deuteron-induced reactions on natural zinc up to 23 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin, E-mail: mu_khandaker@yahoo.com [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu; Murakami, Masashi [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan); Otuka, Naohiko [Nuclear Data Section, Division of Physical and Chemical Sciences, Department of Nuclear Sciences and Applications, International Atomic Energy Agency, A-1400 Vienna (Austria)

    2015-03-01

    Production cross-sections of long-lived radionuclides {sup 66,67}Ga, {sup 64,67}Cu, {sup 65,69m}Zn, and {sup 58m+g}Co via a deuteron irradiation on a natural zinc target were measured up to 23 MeV using a stacked-foil activation technique combined with HPGe γ-ray spectrometry. The present results showed partial agreements with the earlier experimental cross-sections and also with the theoretical data extracted from the TENDL-2013 library. Physical thick target yields of the investigated radionuclides were deduced using the measured cross-sections, and they found agreements with the directly measured ones in the literatures except for those reported by Dmitriev et al. for {sup 65}Zn. Optimal production pathways of the medically important {sup 67}Ga radionuclide using a low energy cyclotron are discussed.

  20. Excitation functions of alpha particle induced reactions on {sup nat}Ti up to 40 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, M.S., E-mail: md.shuzauddin@yahoo.com [Tandem Accelerator Facilities, Institute of Nuclear Science and Technology, Atomic Energy Research Establishment, Savar, Dhaka (Bangladesh); Scholten, B. [Institut für Neurowissenschaften und Medizin, INM-5:Nuklearchemie, Forschungszentrum Jülich, D-52425 Jülich (Germany)

    2016-08-01

    Excitation functions of the reactions {sup nat}Ti(α,x){sup 48}Cr, {sup nat}Ti(α,x){sup 48}V and {sup nat}Ti(α,x){sup 46,48}Sc were determined by the stacked-foil activation technique up to 40 MeV. The radioactivities produced in the {sup nat}Ti target were measured by γ-ray spectrometry using HPGe detector. The reaction {sup nat}Ti(α,x){sup 51}Cr was used to determine the beam parameters. New experimental values for the above reactions have been obtained. An intercomparison of our data with the available literature values has been done. The cross section results obtained in this work could be useful in defining new monitor reactions, radiation safety and isotope production.

  1. Excitation function of alpha-particle-induced reactions on {sup nat}Ni from threshold to 44 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, M.S. [Atomic Energy Research Establishment, Tandem Accelerator Facilities, Institute of Nuclear Science and Technology, Savar, Dhaka (Bangladesh); Kim, K.S.; Nadeem, M.; Kim, G.N. [Kyungpook National University, Department of Physics, Buk-gu, Daegu (Korea, Republic of); Sudar, S. [Debrecen University, Institute of Experimental Physics, Debrecen (Hungary)

    2017-05-15

    Excitation functions of the {sup nat}Ni(α,x){sup 62,63,65}Zn, {sup nat}Ni(α,x){sup 56,57}Ni and {sup nat}Ni(α,x){sup 56,57,58m+g}Co reactions were measured from the respective thresholds to 44MeV using the stacked-foil activation technique. The tests for the beam characterization are described. The radioactivity was measured using HPGe γ-ray detectors. Theoretical calculations on α-particles-induced reactions on {sup nat}Ni were performed using the nuclear model code TALYS-1.8. A few results are new, the others strengthen the database. Our experimental data were compared with results of nuclear model calculations and described the reaction mechanism. (orig.)

  2. Study of excitation function for alpha induced reactions in natural iridium

    International Nuclear Information System (INIS)

    Chaubey, A.K.; Bhardwaj, M.K.; Rizvi, I.A.; Singh, H.

    1990-07-01

    Excitation function of (α, χn) reactions on 191 Ir (37.3%) and on 191 Ir (62.7%) have been measured for 17-55 MeV alpha particle bombarding energy range. Stacked foil activation technique and gamma spectroscopy were used to determine the cross-sections. The experimental data were compared with calculated values obtained by means of geometry dependent hybrid model. The initial exciton number n o = 4 with n = 2, p = 2 and h = 0 gives the best agreements with the presently measured values. To calculate the excitation function theoretically the ALICE/LIVERMORE-82 computer code was used. This set of excitation functions provides a data basis for probing the validity of combined equilibrium and pre-equilibrium reaction models in a considerable energy range. (author). 34 refs, 9 figs

  3. Cyclotron produced {sup 67}Ga, a potential radionuclide for diagnostic and therapeutic applications

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin, E-mail: mu-khandaker@um.edu.my; Kassim, Hasan Abu [Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia); Haba, Hiromitsu [Nishina Center for Accelerator-Based Science, RIKEN, Wako, Saitama 351-0198 (Japan)

    2015-04-29

    Production cross-sections of the {sup nat}Zn(d,x){sup 67}Ga reactions have been measured from a 24-MeV deuteron energy down to the threshold by using a stacked-foil activation technique combined with HPGe γ-ray spectrometry. An overall good agreement is found with some of the earlier measurements, whereas a partial agreement is obtained with the theoretical data extracted from the TENDL-2013 library. Physical thick target yield for the {sup 67}Ga radionuclide was deduced using the measured cross-sections, and found in agreement with the directly measured yield available in the literature. This study reveals that a low deuteron energy (<11 MeV) cyclotron and an enriched {sup 66}Zn target could be used to obtain {sup 67}Ga in no carrier added form.

  4. Measurements and Evaluation of Nuclear Reaction Cross Sections Leading to Various Practical Applications in Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Khandaker, Mayeen Uddin; Lee, Young Ouk; Cho, Young Sik

    2008-07-15

    This report contains the measurements and evaluation of production cross sections of some medically and technologically important radionuclides over the energy range 1-40 MeV by using a conventional stacked-foil activation technique combined with high purity germanium (HPGe) -ray spectrometry. The irradiations were done by using the external beam line of the MC-50 cyclotron at the Korea Institute of Radiological and Medical Sciences (KIRAMS). The standard cross sections for monitor reactions were taken from IAEA web site. Integral yields for the investigated radionuclides were deduced using the measured cross-sections. Reported data were compared with the available literature data, theoretical calculations by the codes TALYS and ALICE-IPPE, and a good overall agreement among them was found.

  5. Experimental study of the cross-sections of alpha-particle induced reactions on $^{209}$Bi

    CERN Document Server

    Hermanne, A; Shubin, Yu N; Szucs, Z; Takács, S; Tarkanyi, F; 10.1016/j.apradiso.2005.01.015

    2005-01-01

    alpha -particle-induced nuclear reactions for generation of /sup 211 /At used in therapeutic nuclear medicine and possible contaminants were investigated with the stacked foil activation technique on natural bismuth targets up to E/sub alpha /=39 MeV. Excitation functions are reported for the reactions /sup 209/Bi( alpha ,2n)/sup 211/At, /sup 209/Bi( alpha ,3n)/sup 210/At and /sup 209/Bi( alpha , x)/sup 210/Po. Results obtained from direct alpha -emission measurements and gamma -spectra from decay products are compared and correspond well with earlier literature values. Thick target yields have been deduced from the experimental cross-sections and optimised production pathways for minimal contamination are presented. A comparison with the results of the theoretical model code ALICE-IPPE is discussed.

  6. Study of indoor radon levels in some radioactive areas of Himachal Pradesh: an inter-comparison of active and passive techniques

    International Nuclear Information System (INIS)

    Bajwa, B.S.; Singh, S.; Sharma, N.; Virk, H.S.

    2006-01-01

    Full text of publication follows: Indoor radon levels measurements were carried using both the active and passive techniques in the dwellings of some villages, known to be located in the vicinity of uranium mineralized zones of Hamirpur district, Himachal Pradesh. Even in the passive technique using S.S.N.T.D., both the bare -slide and twin chamber dosemeter cup modes were utilized. An attempt has also been made to assess the levels of the indoor radon in these dwellings and inhalation dose rates of the population living in these villages. The average value of radon concentration levels using the bare-slide mode varies from 109.0 to 741.5 Bq/m3 in these dwellings, where as the maximum radon level using the twin cup dosemeter technique was found to be 140.3 Bq/m3. As usual the radon concentrations were found to be varying with seasonal changes, building materials etc. The radon survey in the dwellings of these villages has also been carried out using the Alpha-Guard technique, which is based on the pulse ionization chamber. The indoor radon concentration levels measured using the active technique of Alpha Guard have been found to be quite different from those measured in these dwellings by the passive technique of S.S.N.T.D.; indicating the importance of the S.S.N.T.D. in the long -term integrated measurement of the indoor radon levels in the dwellings. (authors)

  7. Antitumor activity of docetaxel-loaded polymeric nanoparticles fabricated by Shirasu porous glass membrane-emulsification technique

    Directory of Open Access Journals (Sweden)

    Yu YN

    2013-07-01

    residence time, respectively, compared with those of PLGA nanoparticles, and 2.23-, 13.2-, 8.51-fold higher than those of Taxotere, respectively. In vivo real-time distribution of nanoparticles was measured on tumor-bearing mice by near-infrared fluorescence imaging, which demonstrated that the PLA-TPGS nanoparticles achieved much higher concentration and longer retention in tumors than PLGA nanoparticles after intravenous injection. This is consistent with the pharmacokinetic behavior of the nanoparticles. The tumor-inhibitory effect of DTX-loaded nanoparticles was observed in vivo in an H22 tumor-bearing mice model via intravenous administration. This indicated that PLA-TPGS nanoparticles are a feasible drug-delivery formulation with a pilot fabrication technique and have superior pharmacokinetic and anticancer effects compared to the commercially available Taxotere. Keywords: SPG membrane emulsification, nanoparticles, docetaxel, pharmacokinetics, antitumor activity

  8. An Evaluation of Air Force Aircraft Battle Damage Repair Techniques Applicable to Repair Activities Onboard the International Space Station

    National Research Council Canada - National Science Library

    Chaudhary, Ravi

    1999-01-01

    United States Air Force (USAF) Aircraft Battle Damage Repair (ABDR) strategies, techniques and technologies are directly applicable to NASA efforts to develop on-orbit repair capabilities for the International Space Station (ISS...

  9. Which behaviour change techniques are most effective at increasing older adults' self-efficacy and physical activity behaviour? A systematic review.

    Science.gov (United States)

    French, David P; Olander, Ellinor K; Chisholm, Anna; Mc Sharry, Jennifer

    2014-10-01

    Increasing self-efficacy is an effective mechanism for increasing physical activity, especially for older people. The aim of this review was to identify behaviour change techniques (BCTs) that increase self-efficacy and physical activity behaviour in non-clinical community-dwelling adults 60 years or over. A systematic search identified 24 eligible studies reporting change in self-efficacy for physical activity following an intervention. Moderator analyses examined whether the inclusion of specific BCTs (as defined by CALO-RE taxonomy) was associated with changes in self-efficacy and physical activity behaviour. Overall, interventions increased self-efficacy (d = 0.37) and physical activity (d = 0.14). Self-regulatory techniques such as setting behavioural goals, prompting self-monitoring of behaviour, planning for relapses, providing normative information and providing feedback on performance were associated with lower levels of both self-efficacy and physical activity. Many commonly used self-regulation intervention techniques that are effective for younger adults may not be effective for older adults.

  10. Site characterization techniques used in environmental restoration activities. Final report of a co-ordinated research project 1995-1999

    International Nuclear Information System (INIS)

    2000-05-01

    The objective of this CRP was to promote the exchange of information on the practical experience gained by the Member States in characterization of radioactively contaminated sites. Special emphasis was placed on the development of methods and techniques for the optimization of radiological characterization. In particular, the scope included: definition of a strategy for site characterization; sampling and measurement techniques; data management, including statistical analysis and deterministic radionuclide migration modelling; and post-cleanup radiological surveys and assurance of compliance with release criteria

  11. Effect of processing techniques on color and active components amount of sweet potato (Ipomoea Batatas l) flakes

    Science.gov (United States)

    Rahmawati, Y.; Mahmudatussa'adah, A.; Yogha, S.

    2016-04-01

    Sweet potato processing is limited, such as flour, snacks, cystic, or chips. Flakes as pre-cooked meals are made through the stages of making pasta and drying. The purpose of this study was to optimize the production of sweet potato flakes at the stage of making pasta and drying. Making the pasta is done through techniques steamed or baked. Pasta drying using tools a drum dryer or cabinet dryer. As an indicator of optimization is the total of monomeric anthocyanins, β-carotene and color the resulting flakes. The results showed that the amount of anthocyanin monomeric flakes by using steam, and drum dryer (3.83 ± 0.03 mg CYE/g db), flakes by the technique of steam, and cabinet dryer (3.03 ± 0.02 mg CYE/g db), flakes with techniques bake, drum dryer (2.49 ± 0.05 CYE mg/g db), flakes with bake technique, cabinet dryer (1.98 ± 0.03 mg CYE/g db). The Color of purple sweet potato flakes produced through steamed techniques bright purple, while the color purple sweet potato flakes produced through techniques roast give a brownish purple color. The amount of β-carotene yellow flakes sweet potato with stages of cooking steamed, drum dryer (152±0.5 mg/Kg db), grilled drum dryer (136±0.4 mg/Kg db), flakes of yellow sweet potato with stages of roasted and cabinet dryer (140±0.8 mg/Kg db), and grilled stage with cabinet dryer (122±0.3 mg/Kg db). In conclusion sweet potato flakes production techniques through the stages of steam process, and used drum dryers have a number of anthocyanins or β-carotene bigger and brighter colors than the baked flakes techniques and used cabinet dryer.

  12. Activity measurements of the high-energy pure beta-emitters Sr-89 and Y-90 by the TDCR efficiency calculation technique

    CSIR Research Space (South Africa)

    Simpson, BRS

    2006-10-01

    Full Text Available The absolute activities of the pure beta-emitters Sr-89 and Y-90 have been determined by a direct method, namely the triple-to-double coincidence ratio (TDCR) efficiency calculation technique. This undertaking has extended further the number...

  13. Comparative scanning electron microscopy evaluation of Canal Brushing technique, sonic activation, and master apical file for the removal of triple antibiotic paste from root canal (in vitro study

    Directory of Open Access Journals (Sweden)

    Deepa Ashoksingh Thakur

    2015-01-01

    Full Text Available Aims: To compare and evaluate the effectiveness of Canal Brushing technique, sonic activation, and master apical file (MAF for the removal of triple antibiotic paste (TAP from root canal using scanning electron microscopy (SEM. Materials and Methods: Twenty-two single rooted teeth were instrumented with ProTaper up to the size number F2 and dressed with TAP. TAP was removed with Canal Brush technique (Group I, n: 6, sonic (EndoActivator (Group II, n: 6, and MAF (Group III, n: 6. Four teeth served as positive (n: 2 and negative (n: 2 controls. The roots were split in the buccolingual direction and prepared for SEM examination (×1000 at coronal, middle, and apical third. Three examiners evaluated the wall cleanliness. Statistical Analysis: Statistical analysis was performed by Kruskal–Wallis test and Wilcoxon rank sum test. Results: Difference in cleanliness between three groups is statistically significant in cervical region only. Pairwise comparison in cervical region Canal Brush and sonic activation showed more removal of TAP than MAF. Conclusions: Canal Brush and sonic activation system showed better result than MAF in the cervical and middle third of canal. In the apical third, none of the techniques showed a better result. None of the techniques showed complete removal of TAP from the canal.

  14. Thorium: one of the analytical techniques in neutronic activation and alpha spectrometry of the CDTN (Brazilian Nuclear Technology Development Center) in the last three decades

    International Nuclear Information System (INIS)

    Menezes, M.A.B.C.; Sabino, C.V.S.

    1994-01-01

    For long years, the CDTN (Brazilian Nuclear Technology Development Center ) has applied several analytical techniques in the thorium determination. This work is about the evolution of the neutronic activation in the thorium 232 analysis from the 1960's to now. The importance of the analysis request and alpha spectrometry for the thorium 228 and thorium 232 determination is emphasized. (J.A.M.M.)

  15. The Effect of Active Learning Techniques on Class Teacher Candidates' Success Rates and Attitudes toward Their Museum Theory and Application Unit in Their Visual Arts Course

    Science.gov (United States)

    Dilmac, Oguz

    2016-01-01

    The purpose of this study is to examine the effect that using active learning techniques during museum and gallery visits has on teacher candidates' academic success rates in and attitudes toward their Visual Arts Course. In this study, the importance and requirement of education to take place in museums and art galleries is emphasized. The…

  16. The Turn the Tables Technique (T[cube]): A Program Activity to Provide Group Facilitators Insight into Teen Sexual Behaviors and Beliefs

    Science.gov (United States)

    Sclafane, Jamie Heather; Merves, Marni Loiacono; Rivera, Angelic; Long, Laura; Wilson, Ken; Bauman, Laurie J.

    2012-01-01

    The Turn the Tables Technique (T[cube]) is an activity designed to provide group facilitators who lead HIV/STI prevention and sexual health promotion programs with detailed and current information on teenagers' sexual behaviors and beliefs. This information can be used throughout a program to tailor content. Included is a detailed lesson plan of…

  17. Behavior Change Techniques in Physical Activity eHealth Interventions for People With Cardiovascular Disease: Systematic Review

    Science.gov (United States)

    Duff, Orlaith Mairead; Walsh, Deirdre MJ; Furlong, Bróna A; O'Connor, Noel E; Woods, Catherine B

    2017-01-01

    Background Cardiovascular disease (CVD) is the leading cause of premature death and disability in Europe, accounting for 4 million deaths per year and costing the European Union economy almost €196 billion annually. There is strong evidence to suggest that exercise-based secondary rehabilitation programs can decrease the mortality risk and improve health among patients with CVD. Theory-informed use of behavior change techniques (BCTs) is important in the design of cardiac rehabilitation programs aimed at changing cardiovascular risk factors. Electronic health (eHealth) is the use of information and communication technologies (ICTs) for health. This emerging area of health care has the ability to enhance self-management of chronic disease by making health care more accessible, affordable, and available to the public. However, evidence-based information on the use of BCTs in eHealth interventions is limited, and particularly so, for individuals living with CVD. Objective The aim of this systematic review was to assess the application of BCTs in eHealth interventions designed to increase physical activity (PA) in CVD populations. Methods A total of 7 electronic databases, including EBSCOhost (MEDLINE, PsycINFO, Academic Search Complete, SPORTDiscus with Full Text, and CINAHL Complete), Scopus, and Web of Science (Core Collection) were searched. Two authors independently reviewed references using the software package Covidence (Veritas Health Innovation). The reviewers met to resolve any discrepancies, with a third independent reviewer acting as an arbitrator when required. Following this, data were extracted from the papers that met the inclusion criteria. Bias assessment of the studies was carried out using the Cochrane Collaboration’s tool for assessing the risk of bias within Covidence; this was followed by a narrative synthesis. Results Out of the 987 studies that were identified, 14 were included in the review. An additional 9 studies were added following a

  18. An application of CCD read-out technique to neutron distribution measurement using the self-activation method with a CsI scintillator plate

    Energy Technology Data Exchange (ETDEWEB)

    Nohtomi, Akihiro, E-mail: nohtomi@hs.med.kyushu-u.ac.jp [Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582 (Japan); Kurihara, Ryosuke; Kinoshita, Hiroyuki; Honda, Soichiro; Tokunaga, Masaaki; Uno, Heita [Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582 (Japan); Shinsho, Kiyomitsu [Graduate School of Human Sciences, Tokyo Metropolitan University, 7-2-10 Higashi-oku, Arakawa-ku, Tokyo 116-8551 (Japan); Wakabayashi, Genichiro [Atomic Energy Research Institute, Kinki University, 3-4-1 Kowakae, Higashiosaka-shi, Osaka 577-8502 (Japan); Koba, Yusuke [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba-shi, Chiba 263-8555 (Japan); Fukunaga, Junichi; Umezu, Yoshiyuki; Nakamura, Yasuhiko [Department of Radiology, Kyushu University Hospital, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582 (Japan); Ohga, Saiji [Department of Clinical Radiology, Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-ku, Fukuoka 812-8582 (Japan)

    2016-10-01

    In our previous paper, the self-activation of an NaI scintillator had been successfully utilized for detecting photo-neutrons around a high-energy X-ray radiotherapy machine; individual optical pulses from the self-activated scintillator are read-out by photo sensors such as a photomultiplier tube (PMT). In the present work, preliminary observations have been performed in order to apply a direct CCD read-out technique to the self-activation method with a CsI scintillator plate using a Pu-Be source and a 10-MV linac. In conclusion, it has been revealed that the CCD read-out technique is applicable to neutron measurement around a high-energy X-ray radiotherapy machine with the self-activation of a CsI plate. Such application may provide a possibility of novel method for simple neutron dose-distribution measurement. - Highlights: • Preliminary observations have been performed by a CCD for the CsI self-activation method. • It has been revealed that the CCD read-out technique is applicable to neutron measurement. • Such application may provide a novel method for simple neutron distribution measurement.

  19. An application of CCD read-out technique to neutron distribution measurement using the self-activation method with a CsI scintillator plate

    International Nuclear Information System (INIS)

    Nohtomi, Akihiro; Kurihara, Ryosuke; Kinoshita, Hiroyuki; Honda, Soichiro; Tokunaga, Masaaki; Uno, Heita; Shinsho, Kiyomitsu; Wakabayashi, Genichiro; Koba, Yusuke; Fukunaga, Junichi; Umezu, Yoshiyuki; Nakamura, Yasuhiko; Ohga, Saiji

    2016-01-01

    In our previous paper, the self-activation of an NaI scintillator had been successfully utilized for detecting photo-neutrons around a high-energy X-ray radiotherapy machine; individual optical pulses from the self-activated scintillator are read-out by photo sensors such as a photomultiplier tube (PMT). In the present work, preliminary observations have been performed in order to apply a direct CCD read-out technique to the self-activation method with a CsI scintillator plate using a Pu-Be source and a 10-MV linac. In conclusion, it has been revealed that the CCD read-out technique is applicable to neutron measurement around a high-energy X-ray radiotherapy machine with the self-activation of a CsI plate. Such application may provide a possibility of novel method for simple neutron dose-distribution measurement. - Highlights: • Preliminary observations have been performed by a CCD for the CsI self-activation method. • It has been revealed that the CCD read-out technique is applicable to neutron measurement. • Such application may provide a novel method for simple neutron distribution measurement.

  20. Airway Clearance Techniques (ACTs)

    Medline Plus

    Full Text Available ... of treatment options. Airway Clearance Active Cycle of Breathing Technique Airway Clearance Techniques Autogenic Drainage Basics of ... Pulmonary Exacerbations Clinical Care Guidelines SCREENING & TREATING DEPRESSION & ANXIETY GUIDELINES Clinician Resources As a clinician, you’re ...

  1. Behavior Change Techniques in Physical Activity eHealth Interventions for People With Cardiovascular Disease: Systematic Review.

    Science.gov (United States)

    Duff, Orlaith Mairead; Walsh, Deirdre Mj; Furlong, Bróna A; O'Connor, Noel E; Moran, Kieran A; Woods, Catherine B

    2017-08-02

    Cardiovascular disease (CVD) is the leading cause of premature death and disability in Europe, accounting for 4 million deaths per year and costing the European Union economy almost €196 billion annually. There is strong evidence to suggest that exercise-based secondary rehabilitation programs can decrease the mortality risk and improve health among patients with CVD. Theory-informed use of behavior change techniques (BCTs) is important in the design of cardiac rehabilitation programs aimed at changing cardiovascular risk factors. Electronic health (eHealth) is the use of information and communication technologies (ICTs) for health. This emerging area of health care has the ability to enhance self-management of chronic disease by making health care more accessible, affordable, and available to the public. However, evidence-based information on the use of BCTs in eHealth interventions is limited, and particularly so, for individuals living with CVD. The aim of this systematic review was to assess the application of BCTs in eHealth interventions designed to increase physical activity (PA) in CVD populations. A total of 7 electronic databases, including EBSCOhost (MEDLINE, PsycINFO, Academic Search Complete, SPORTDiscus with Full Text, and CINAHL Complete), Scopus, and Web of Science (Core Collection) were searched. Two authors independently reviewed references using the software package Covidence (Veritas Health Innovation). The reviewers met to resolve any discrepancies, with a third independent reviewer acting as an arbitrator when required. Following this, data were extracted from the papers that met the inclusion criteria. Bias assessment of the studies was carried out using the Cochrane Collaboration's tool for assessing the risk of bias within Covidence; this was followed by a narrative synthesis. Out of the 987 studies that were identified, 14 were included in the review. An additional 9 studies were added following a hand search of review paper references

  2. Image analysis, methanogenic activity measurements, and molecular biological techniques to monitor granular sludge from EGSB reactors fed with oleic acid

    NARCIS (Netherlands)

    Pereira, M.A.; Roest, de K.; Stams, A.J.M.; Akkermans, A.D.L.; Amaral, A.L.; Pons, M.N.; Ferreira, E.C.; Mota, M.; Alves, M.

    2003-01-01

    Morphological changes in anaerobic granular sludge fed with increasing loads of oleic acid were quantified by image analysis. The combination of this technique with data on-the accumulation of adsorbed long chain fatty acid and with the molecular characterization of microbial community gave insight

  3. Terahertz Techniques

    CERN Document Server

    Bründermann, Erik; Kimmitt, Maurice FitzGerald

    2012-01-01

    Research and development in the terahertz portion of the electromagnetic spectrum has expanded very rapidly during the past fifteen years due to major advances in sources, detectors and instrumentation. Many scientists and engineers are entering the field and this volume offers a comprehensive and integrated treatment of all aspects of terahertz technology. The three authors, who have been active researchers in this region over a number of years, have designed Terahertz Techniques to be both a general introduction to the subject and a definitive reference resource for all those involved in this exciting research area.

  4. The use of environmental monitoring as a technique to identify isotopic enrichment activities; O uso da monitoracao ambiental como tecnica de identificacao de atividades de enriquecimento isotopico

    Energy Technology Data Exchange (ETDEWEB)

    Buchmann, Jose Henrique

    2000-07-01

    The use of environmental monitoring as a technique to identify activities related to the nuclear fuel cycle has been proposed, by international organizations, as an additional measure to the safeguards agreements in force. The elements specific for each kind of nuclear activity, or nuclear signatures, inserted in the ecosystem by several transfer paths, can be intercepted with better or worse ability by different live organisms. Depending on the kind of signature of interest, the anthropogenic material identification and quantification require the choice of adequate biologic indicators and, mainly, the use of sophisticated techniques associated with elaborate sample treatments. This work demonstrates the technical viability of using pine needles as bioindicators of nuclear signatures associated with uranium enrichment activities. Additionally, it proposes the use of a technique widely diffused nowadays in the scientific community, the High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS), to identify the signature corresponding to that kind of activities in the ecosystem. It can be also found a description of a methodology recently being applied in analytical chemistry,based on uncertainties estimates metrological concepts, used to calculate the uncertainties associated with the obtained measurement results. Nitric acid solutions with a concentration of 0.3 mol.kg{sup -1}, used to wash pine needles sampled near facilities that manipulate enriched uranium and containing only 0.1 {mu}g.kg{sup -1} of uranium, exhibit a {sup 235} U: {sup 238} U isotopic abundance ratio of 0.0092{+-}0.0002, while solutions originated from samples collected at places located more than 200 km far from activities related to the nuclear fuel cycle exhibit a value of 0.0074{+-}0.0002 for this abundance ratio. Similar results were obtained for samples collected in different places permit to confirm the presence of anthropogenic uranium and demonstrate the viability of using

  5. Surface corrosion analysis of machine elements using thin layer activation technique with the proton beam from national medical cyclotron

    International Nuclear Information System (INIS)

    Mukherjee, B.

    1996-01-01

    The surface of metallic objects becomes activated when irradiated with a narrow energetic charged particle (eg. proton) beam. The depth of the activated region and the yield of the induced radioactivity depend on the charged particle energy and beam intensity respectively. The surface radioactivity of the irradiated object is depleted when the activated surface undergo wear or corrosion processes. Therefore, the quantitative assay of the remaining surface radioactivity could be used as a very effective method for monitoring wear or corrosion processes. This poster highlights some interesting results of the Thin Layer Activation (TLA) study currently undertaken at the Health Physics laboratory of the National Medical Cyclotron

  6. Advantages of active love wave techniques in geophysical characterizations of seismographic station - Case studies in California and the central and eastern United States

    Science.gov (United States)

    Martin, Antony; Yong, Alan K.; Salomone, Larry A.

    2014-01-01

    Active-source Love waves, recorded by the multi-channel analysis of surface wave (MASLW) technique, were recently analyzed in two site characterization projects. Between 2010 and 2012, the 2009 American Recovery and Reinvestment Act (ARRA) funded GEOVision to conduct geophysical investigations at 191 seismographic stations in California and the Central Eastern U.S. (CEUS). The original project plan was to utilize active and passive Rayleigh wave-based techniques to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30). Early in this investigation it became clear that Rayleigh wave techniques, such as multi-channel analysis of surface waves (MASRW), were not suited for characterizing all sites. Shear-wave seismic refraction and MASLW techniques were therefore applied. In 2012, the Electric Power Research Institute funded characterization of 33 CEUS station sites. Based on experience from the ARRA investigation, both MASRW and MASLW data were acquired by GEOVision at 24 CEUS sites. At shallow rock sites, sites with steep velocity gradients, and, sites with a thin, low velocity, surficial soil layer overlying stiffer sediments, Love wave techniques generally were found to be easier to interpret, i.e., Love wave data typically yielded unambiguous fundamental mode dispersion curves and thus, reduce uncertainty in the resultant VS model. These types of velocity structure often excite dominant higher modes in Rayleigh wave data, but not in the Love wave data. It is possible to model Rayleigh wave data using multi- or effective-mode techniques; however, extraction of Rayleigh wave dispersion data was found to be difficult in many cases. These results imply that field procedures should include careful scrutiny of Rayleigh wave-based dispersion data in order to also collect Love wave data when warranted.

  7. Study of indoor radon levels in some radioactive areas of Himachal Pradesh: an inter-comparison of active and passive techniques

    International Nuclear Information System (INIS)

    Bajwa, B.S.; Singh, S.; Sharma, N.; Virk, H.S.

    2006-01-01

    Full text of publication follows: Indoor radon levels measurements were carried using both the active and passive techniques in the dwellings of some villages, known to be located in the vicinity of uranium mineralized zones of Hamirpur district, Himachal Pradesh. Even in the passive technique using Solid State Nuclear Track Detectors (S.S.N.T.D.), both the bare-slide and twin chamber dosemeter cup modes were utilized. An attempt has also been made to assess the levels of the indoor radon in these dwellings and inhalation dose rates of the population living in these villages. The average value of radon concentration levels using the bare-slide mode varies from 109.0 to 741.5 Bq/m3 in these dwellings, where as the maximum radon level using the twin cup dosemeter technique was found to be 140.3 Bq/m3. As usual the radon concentrations were found to be varying with seasonal changes, building materials etc. The radon survey in the dwellings of these villages has also been carried out using the Alpha- Guard technique, which is based on the pulse ionization chamber. The indoor radon concentration levels measured using the active technique of Alpha Guard have been found to be quite different from those measured in these dwellings by the passive technique of S.S.N.T.D.; indicating the importance of the S.S.N.T.D. in the long-term integrated measurement of the indoor radon levels in the dwellings. (authors)

  8. Application of the {sup 210}Pb-dating technique to evaluate environmental changes resulting from recent human activities

    Energy Technology Data Exchange (ETDEWEB)

    Jenkinson, A.V.; Chisari, R.; Farrar, Y.J.; Heijnis, H.; McOrist, G.D. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Hallegraeff, G. [University of Tasmania, Tasmania, (Australia). Department of Plant Science; Hughes, M.; Napoli, M. [University of Sydney, Sydney, NSW (Australia). Department of Geology and Geophysics; James, J.M. [University of Sydney, NSW, (Australia). School of Chemistry; McMinn, A.; Thomson, P. [University of Tasmania, Tasmania, (Australia). Institute of Antartic and Southern Ocean Studies; Smith, J.D.; Tinker, R.A. [University of Melbourne, Parkville, VIC (Australia). School of Chemistry, Marine Chemistry Laboratory

    1997-10-01

    The {sup 210}Pb-dating technique has shown particular promise for the study of recent environmental change by enabling the establishment of chronologies for contemporary environmental processes. In this paper two case studies are discussed. Case Study (1) looks at trace element and heavy metal levels in the estuaries of the Georges River and the Hacking River which are partly located in suburban Sydney and Case Study (2) looks at blooms of the toxic dinoflagellate Gymnodinium catenatum which were first observed in Tasmanian waters, principally the Huon and Derwent Rivers in 1980. In both cases the {sup 210}Pb dating technique has been used to establish the sequence of sediment deposition in order to associate an age to the sediment layer which contains the entity under investigation 7 refs., 5 figs.

  9. Application of the 210Pb-dating technique to evaluate environmental changes resulting from recent human activities

    International Nuclear Information System (INIS)

    Jenkinson, A.V.; Chisari, R.; Farrar, Y.J.; Heijnis, H.; McOrist, G.D.; Hallegraeff, G.; Hughes, M.; Napoli, M.; James, J.M.; McMinn, A.; Thomson, P.; Smith, J.D.; Tinker, R.A.

    1997-01-01

    The 210 Pb-dating technique has shown particular promise for the study of recent environmental change by enabling the establishment of chronologies for contemporary environmental processes. In this paper two case studies are discussed. Case Study (1) looks at trace element and heavy metal levels in the estuaries of the Georges River and the Hacking River which are partly located in suburban Sydney and Case Study (2) looks at blooms of the toxic dinoflagellate Gymnodinium catenatum which were first observed in Tasmanian waters, principally the Huon and Derwent Rivers in 1980. In both cases the 210 Pb dating technique has been used to establish the sequence of sediment deposition in order to associate an age to the sediment layer which contains the entity under investigation

  10. SOME METHODOLOGICAL TECHNIQUES OF ACTIVATION OF THE COGNITIVE INTEREST IN BIOLOGY CLASSES OF STUDENTS OF THE MEDICAL TECHNICAL PROFILE

    OpenAIRE

    V. N. Baranov; A. S. Kachalin; M. S. Bochkov; D. Yu. Kadochnikov; S. Yu. Yegorov

    2014-01-01

    Research objective. Identification of possibility of the modern pedagogical receptions in development of cognitive interest in students of a medico-technical profile at biology lessons.Research techniques. The theoretical: the analysis of psychology and pedagogical and methodical literature on a research problem, the teoretiko-methodical analysis of a studied problem, development of methodical bases of its realization in biology training; approach to carrying out a lecture and practical train...

  11. Image analysis, methanogenic activity measurements, and molecular biological techniques to monitor granular sludge from EGSB reactors fed with oleic acid

    OpenAIRE

    Pereira, M.A.; Roest, de, K.; Stams, A.J.M.; Akkermans, A.D.L.; Amaral, A.L.; Pons, M.N.; Ferreira, E.C.; Mota, M.; Alves, M.

    2003-01-01

    Morphological changes in anaerobic granular sludge fed with increasing loads of oleic acid were quantified by image analysis. The combination of this technique with data on-the accumulation of adsorbed long chain fatty acid and with the molecular characterization of microbial community gave insight into the mechanisms of sludge disintegration, flotation and washoutMorphological changes in anaerobic granular sludge fed with increasing loads of oleic acid were quantified by image analysis. The ...

  12. A modified Ce/Mg-BCIP-NBT formazan/indigoblue technique for demonstration of non-specific alkaline phosphatase activity.

    Science.gov (United States)

    Halbhuber, K J; Krieg, R; Geidel, O; Dietz, W

    2004-01-01

    The wide ranged structurally variability of formazans and their accessibility for auxiliary additives as redoxmediators or metals provide an easy tunable chromogenic visualization technique. We present here an improved nitro blue tetrazolium (NBT) 5-bromo-4-chloro-3-indolyl phosphate (BCIP) method which is superior to the classical McGadey's procedure regarding proper precipitation and localization as well as sensitivity. Different metal additives as well as the overall reaction course modifying additives (redox mediators, chelating additives, buffer) were optimized.

  13. Chronic Achilles tendinopathy: a case study of treatment incorporating active and passive tissue warm-up, Graston Technique, ART, eccentric exercise, and cryotherapy.

    Science.gov (United States)

    Miners, Andrew L; Bougie, Tracy L

    2011-12-01

    To describe the subjective pain and functional improvements of a patient with chronic Achilles tendinopathy following a treatment plan incorporating active and passive tissue warm-up, followed respectively by soft tissue mobilization utilizing both Graston Technique(®) and Active Release Techniques(®), eccentric exercise, and static stretching in combination with cryotherapy. The primary characterization of chronic Achilles tendinopathy is gradual onset of pain and dysfunction focused in one or both Achilles tendons arising secondary to a history of repetitive use or excessive overload. Conservative treatment is commonly the initial strategy for patient management. Tissue heating, soft tissue mobilization, eccentric training, and static stretching with cryotherapy were implemented to reduce pain and improve function. A specific protocol of heat, soft tissue mobilization, eccentric exercise, stretching, and cryotherapy appeared to facilitate a rapid and complete recovery from chronic Achilles tendinopathy.

  14. High Classification Rates for Continuous Cow Activity Recognition using Low-cost GPS Positioning Sensors and Standard Machine Learning Techniques

    DEFF Research Database (Denmark)

    Godsk, Torben; Kjærgaard, Mikkel Baun

    2011-01-01

    changes, affects the behavior of the individual animal, e.g., changes in time spend on activities like standing, lying, eating or walking. Low-cost and infrastructure-less GPS positioning sensors attached to the animals’ collars give the opportunity to monitor the movements of cows and recognize cow...... and their activities manually logged to serve as ground truth. For our dataset we managed to obtain an average classification success rate of 86.2% of the four activities: eating/seeking (90.0%), walking (100%), lying (76.5%), and standing (75.8%) by optimizing both the preprocessing of the raw GPS data...

  15. Experimental techniques; Techniques experimentales

    Energy Technology Data Exchange (ETDEWEB)

    Roussel-Chomaz, P. [GANIL CNRS/IN2P3, CEA/DSM, 14 - Caen (France)

    2007-07-01

    This lecture presents the experimental techniques, developed in the last 10 or 15 years, in order to perform a new class of experiments with exotic nuclei, where the reactions induced by these nuclei allow to get information on their structure. A brief review of the secondary beams production methods will be given, with some examples of facilities in operation or under project. The important developments performed recently on cryogenic targets will be presented. The different detection systems will be reviewed, both the beam detectors before the targets, and the many kind of detectors necessary to detect all outgoing particles after the reaction: magnetic spectrometer for the heavy fragment, detection systems for the target recoil nucleus, {gamma} detectors. Finally, several typical examples of experiments will be detailed, in order to illustrate the use of each detector either alone, or in coincidence with others. (author)

  16. Study of some Ayurvedic Indian medicinal plants for the essential trace elemental contents by instrumental neutron activation analysis and atomic absorption spectroscopy techniques

    International Nuclear Information System (INIS)

    Lokhande, R.S.; Singare, P.U.; Andhele, M.L.; Acharya, R.; Nair, A.G.C.; Reddy, A.V.R.

    2009-01-01

    Elemental analysis of some medicinal plants used in the Indian Ayurvedic system was performed by employing instrumental neutron activation analysis (INAA) and atomic absorption spectroscopy (AAS) techniques. The samples were irradiated with thermal neutrons in a nuclear reactor and the induced activity was counted by gamma ray spectrometry using an efficiency calibrated high resolution high purity germanium (HPGe) detector. Most of the medicinal plants were found to be rich in one or more of the elements under study. The variation in elemental concentration in same medicinal plants samples collected in summer, winter and rainy seasons was studied and the biological effects of these elements on human beings are discussed. (orig.)

  17. The technique of express vital determination of radiocesium specific activity in muscular tissue of large agricultural animals by means of the TIM-140 radiometer

    International Nuclear Information System (INIS)

    1997-01-01

    The technique is intended for vital determination of cesium 137 specific activity in muscular tissue of large agricultural animals by means of the TIM-140 radiometer. The specific activity is determined using two measurements. With one measurement the gamma radiation detector is located on a lateral surface of coxofemoral part of the animal, and with the second measurement the absorbing gamma radiation screen is placed between the detector and zone of measurement. The external gamma background and useful signal are registered simultaneously. It allows to carry out measurements with a background till 0.05 mR/h without application of external screens

  18. Image analysis, methanogenic activity measurements, and molecular biological techniques to monitor granular sludge from an EGSB reactor fed with oleic acid.

    Science.gov (United States)

    Pereira, M A; Roest, K; Stams, A J M; Akkermans, A D L; Amaral, A L; Pons, M N; Ferreira, E C; Mota, M; Alves, M M

    2003-01-01

    Morphological changes in anaerobic granular sludge fed with increasing loads of oleic acid were quantified by image analysis. The combination of this technique with data on the accumulation of adsorbed long chain fatty acid and with the molecular characterization of microbial community gave insight into the mechanisms of sludge disintegration, flotation and washout. It was found that the bacterial domain was more affected than the archaeal domain during this process. However, no acetoclastic activity and onlya residual hydrogenotrophic activity were detected in the sludge at the end of the operation.

  19. What are the most effective techniques in changing obese individuals’ physical activity self-efficacy and behaviour: a systematic review and meta-analysis

    Science.gov (United States)

    2013-01-01

    Increasing self-efficacy is generally considered to be an important mediator of the effects of physical activity interventions. A previous review identified which behaviour change techniques (BCTs) were associated with increases in self-efficacy and physical activity for healthy non-obese adults. The aim of the current review was to identify which BCTs increase the self-efficacy and physical activity behaviour of obese adults. A systematic search identified 61 comparisons with obese adults reporting changes in self-efficacy towards engaging in physical activity following interventions. Of those comparisons, 42 also reported changes in physical activity behaviour. All intervention descriptions were coded using Michie et al’s (2011) 40 item CALO-RE taxonomy of BCTs. Meta-analysis was conducted with moderator analyses to examine the association between whether or not each BCT was included in interventions, and size of changes in both self-efficacy and physical activity behaviour. Overall, a small effect of the interventions was found on self-efficacy (d = 0.23, 95% confidence interval (CI): 0.16-0.29, p self-efficacy; ‘action planning’, ‘time management’, ‘prompt self-monitoring of behavioural outcome’ and ‘plan social support/social change’. These latter two BCTs were also associated with positive changes in physical activity. An additional 19 BCTs were associated with positive changes in physical activity. The largest effects for physical activity were found where interventions contained ‘teach to use prompts/cues’, ‘prompt practice’ or ‘prompt rewards contingent on effort or progress towards behaviour’. Overall, a non-significant relationship was found between change in self-efficacy and change in physical activity (Spearman’s Rho = −0.18 p = 0.72). In summary, the majority of techniques increased physical activity behaviour, without having discernible effects on self-efficacy. Only two BCTs were associated with

  20. Incorporating active-learning techniques into the photonics-related teaching in the Erasmus Mundus Master in "Color in Informatics and Media Technology"

    Science.gov (United States)

    Pozo, Antonio M.; Rubiño, Manuel; Hernández-Andrés, Javier; Nieves, Juan L.

    2014-07-01

    In this work, we present a teaching methodology using active-learning techniques in the course "Devices and Instrumentation" of the Erasmus Mundus Master's Degree in "Color in Informatics and Media Technology" (CIMET). A part of the course "Devices and Instrumentation" of this Master's is dedicated to the study of image sensors and methods to evaluate their image quality. The teaching methodology that we present consists of incorporating practical activities during the traditional lectures. One of the innovative aspects of this teaching methodology is that students apply the concepts and methods studied in class to real devices. For this, students use their own digital cameras, webcams, or cellphone cameras in class. These activities provide students a better understanding of the theoretical subject given in class and encourage the active participation of students.

  1. A preliminary demonstration of "virtual warehousing" and cross-docking technique with active RFID combined with asset tracking equipment.

    Science.gov (United States)

    2010-11-01

    The University of Denvers Intermodal Transportation Institute and System Planning : Corporations GlobalTrak system have successfully demonstrated the integration of GPS : tracking and active RFID monitoring of simulated cargo of pallet and cart...

  2. Severe thunderstorm activity over Bihar on 21st April, 2015: a simulation study by satellite based Nowcasting technique

    Science.gov (United States)

    Goyal, Suman; Kumar, Ashish; Sangar, Ghansham; Mohapatra, M.

    2016-05-01

    Satellite based Nowcasting technique is customized version of Forecast and Tracking the Evolution of Cloud Clusters (ForTraCC), it uses the extrapolation technique that allows for the tracking of Mesoscale convective systems (MCS) radiative and morphological properties and forecasts the evolution of these properties (based on cloud-top brightness temperature and area of the cloud cluster) up to 360 minutes, using infrared satellite imagery. The Thermal Infrared (TIR) channel of the weather satellite has been broadly used to study the behaviour of the cloud systems associated with deep convection. The main advantage of this approach is that for most of the globe the best statistics can only be obtained from satellite observations. Such a satellite survey would provide the statistics of MCSs covering the range of meteorological conditions needed to generalize the result and on the other hand only satellite observations can cover the very large range of space and time scale. The algorithm script is taken from Brazilian Scientist Dr. Danial Vila and implemented it into the Indian environment and made compatible with INSAT-3D hdf5 data format. For Indian region it utilizes the INSAT-3D satellite data of TIR1 (10.8 μm) channel and creates nowcast. The output is made compatible with GUI based software MIAS by generating the output in hdf5 format for better understanding and analysis of forecast. The main features of this algorithm are detection of Cloud Cluster based on Cloud Top Brightness Temperature (CTBT) and area i.e. ≤235 ºK and ≥2400 km2 respectively. The tracking technique based on MCS overlapping areas in successive images. The script has been automized in Auxiliary Data Processing System (ADPS) and generating the forecast file in every half an hour and convert the output file in geotiff format. The geotiff file is easily converted into KMZ file format using ArcGIS software to overlay it on google map and hosted on the web server.

  3. Correction for intravascular activity in the oxygen-15 steady-state technique is independent of the regional hematocrit

    International Nuclear Information System (INIS)

    Lammertsma, A.A.; Baron, J.C.; Jones, T.

    1987-01-01

    The oxygen-15 steady-state technique to measure the regional cerebral metabolic rate for oxygen requires a correction for the nonextracted intravascular molecular oxygen-15. To perform this correction, an additional procedure is carried out using RBCs labeled with 11 CO or C 15 O. The previously reported correction method, however, required knowledge of the regional cerebral to large vessel hematocrit ratio. A closer examination of the underlying model eliminated this ratio. Both molecular oxygen and carbon monoxide are carried by RBCs and are therefore similarly affected by a change in hematocrit

  4. Dutch Young Adults Ratings of Behavior Change Techniques Applied in Mobile Phone Apps to Promote Physical Activity: A Cross-Sectional Survey.

    Science.gov (United States)

    Belmon, Laura S; Middelweerd, Anouk; Te Velde, Saskia J; Brug, Johannes

    2015-11-12

    Interventions delivered through new device technology, including mobile phone apps, appear to be an effective method to reach young adults. Previous research indicates that self-efficacy and social support for physical activity and self-regulation behavior change techniques (BCT), such as goal setting, feedback, and self-monitoring, are important for promoting physical activity; however, little is known about evaluations by the target population of BCTs applied to physical activity apps and whether these preferences are associated with individual personality characteristics. This study aimed to explore young adults' opinions regarding BCTs (including self-regulation techniques) applied in mobile phone physical activity apps, and to examine associations between personality characteristics and ratings of BCTs applied in physical activity apps. We conducted a cross-sectional online survey among healthy 18 to 30-year-old adults (N=179). Data on participants' gender, age, height, weight, current education level, living situation, mobile phone use, personality traits, exercise self-efficacy, exercise self-identity, total physical activity level, and whether participants met Dutch physical activity guidelines were collected. Items for rating BCTs applied in physical activity apps were selected from a hierarchical taxonomy for BCTs, and were clustered into three BCT categories according to factor analysis: "goal setting and goal reviewing," "feedback and self-monitoring," and "social support and social comparison." Most participants were female (n=146), highly educated (n=169), physically active, and had high levels of self-efficacy. In general, we observed high ratings of BCTs aimed to increase "goal setting and goal reviewing" and "feedback and self-monitoring," but not for BCTs addressing "social support and social comparison." Only 3 (out of 16 tested) significant associations between personality characteristics and BCTs were observed: "agreeableness" was related to

  5. Measurements of the Backstreaming Proton IONS in the Self-Magnetic Pinch (SMP) Diode Utilizing Copper Activation Technique

    Science.gov (United States)

    Mazarakis, Michael; Cuneo, Michael; Fournier, Sean; Johnston, Mark; Kiefer, Mark; Leckbee, Joshua; Simpson, Sean; Renk, Timothy; Webb, Timothy; Bennett, Nichelle

    2016-10-01

    The results presented here were obtained with an SMP diode mounted at the front high voltage end of the 8-10-MV RITS Self-Magnetically Insulated Transmission Line (MITL) voltage adder. Our experiments had two objectives: first, to measure the contribution of the back-streaming proton currents emitted from the anode target, and second, to evaluate the energy of those ions and hence the actual Anode-Cathode (A-K) gap voltage. The accelerating voltage quoted in the literature is estimated utilizing para-potential flow theories. Thus, it is interesting to have another independent measurement of the A-K voltage. We have measured the back-streaming protons emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatment, namely, heating at very high temperatures with DC and pulsed current, with RF plasma cleaning, and with both plasma cleaning and heating. We have also evaluated the A-K gap voltage by energy filtering techniques. Sandia is operated by Sandia Corporation, a subsidiary of Lockheed Martin Company, for the US DOE NNSA under Contract No. DE-AC04-94AL85000.

  6. An application of DEMATEL technique to find the effect of different factors influencing outsourcing activities in water and switch organization

    Directory of Open Access Journals (Sweden)

    Fatimah Hemati

    2012-10-01

    Full Text Available Outsourcing plays an important role on reducing unnecessary activities in any organization and helps focus only on value added activities. Water resource organization in each city is responsible to supply fresh and clean water and dispose switch as efficiently as possible and all citizens normally benefit from these organizations. The proposed model of this paper uses DEMATEL to prioritize 14 different factors influencing on outsourcing activities. The survey was performed from October, 2011 to May, 2012 among employees on work for water resource organization in city of Semnan, Iran. The survey chooses a sample of 92 employees out of 120 people who worked for this organization. Cronbach alpha is calculated as 90%, which is well above the minimum acceptable level. The results of the survey indicate that expediting work process is the most important factor while reducing the cost is considered as the least important factors among 14 different items.

  7. An appraisal of neutron activation analysis and other analytical techniques for the determination of arsenic, selenium and tin in environmental samples

    International Nuclear Information System (INIS)

    Peterson, P.J.; Girling, C.A.; Klumpp, D.W.; Minski, M.J.

    1979-01-01

    The paper presents an experimental comparison between neutron activation analysis, atomic absorption spectrophotometry and fluorescence spectrophotometry used for the determination of trace amounts of As, Se and Sn and the other two analytical techniques mentioned. Gamma-ray spectrometry has been used to determine 76 As (tsub(1/2)=26.3 h) after 1 day's irradiation at a thermal neutron flux of 1.6x10 12 n.cm -2 .s -1 . High sensitivity was also obtained using an atomic absorption spectrophotometer coupled with covalent hydride generation. Advantages of the latter technique include simplicity of operation, high speed of analysis and negligible background correction. When used in conjuction with selective reduction and a cold-trap this method quantitatively distinguishes between the valence states and some methylated derivatives. Selenium has been analysed by gamma-ray spectrometry using 77 Sesup(m) (tsub(1/2)=17.5 s) after cyclic activation at a thermal neutron flux of 2x10 12 n.cm -2 .s -1 . Atomic absorption spectrophotometry following hydride generation, or fluorescence spectrophotometry of the 2,3 diaminonaphthalene complex constitute additional sensitive analytical methods for the determination of Se. These have the added advantage that valence states can be selectively measured. Low concentrations of Sn have been determined by neutron activation analysis and by spectrophotometric techniques using phenylfluorone as the complexing reagent, but these methods depend on selective extraction of Sn(IV) iodide. Whilst maintaining high sensitivity, these problems were avoided by using the hydride generation technique with an atomic absorption spectrophotometer. Comparative analytical values for Bowen's kale and NBS orchard leaves are presented

  8. Effectiveness of four different final irrigation activation techniques on smear layer removal in curved root canals : a scanning electron microscopy study.

    Directory of Open Access Journals (Sweden)

    Puneet Ahuja

    2014-02-01

    Full Text Available The aim of this study was to assess the efficacy of apical negative pressure (ANP, manual dynamic agitation (MDA, passive ultrasonic irrigation (PUI and needle irrigation (NI as final irrigation activation techniques for smear layer removal in curved root canals.Mesiobuccal root canals of 80 freshly extracted maxillary first molars with curvatures ranging between 25° and 35° were used. A glide path with #08-15 K files was established before cleaning and shaping with Mtwo rotary instruments (VDW, Munich, Germany up to size 35/0.04 taper. During instrumentation, 1 ml of 2.5% NaOCl was used at each change of file. Samples were divided into 4 equal groups (n=20 according to the final irrigation activation technique: group 1, apical negative pressure (ANP (EndoVac; group 2, manual dynamic agitation (MDA; group 3, passive ultrasonic irrigation (PUI; and group 4, needle irrigation (NI. Root canals were split longitudinally and subjected to scanning electron microscopy. The presence of smear layer at coronal, middle and apical levels was evaluated by superimposing 300-μm square grid over the obtained photomicrographs using a four-score scale with X1,000 magnification.Amongst all the groups tested, ANP showed the overall best smear layer removal efficacy (p < 0.05. Removal of smear layer was least effective with the NI technique.ANP (EndoVac system can be used as the final irrigation activation technique for effective smear layer removal in curved root canals.

  9. The effect of different final irrigant activation techniques on the bond strength of an epoxy resin-based endodontic sealer: a preliminary study.

    Science.gov (United States)

    Topçuoğlu, Hüseyin Sinan; Tuncay, Öznur; Demirbuga, Sezer; Dinçer, Asiye Nur; Arslan, Hakan

    2014-06-01

    The aim of this study was to evaluate whether or not different final irrigation activation techniques affect the bond strength of an epoxy resin-based endodontic sealer (AH Plus; Dentsply DeTrey, Konstanz, Germany) to the root canal walls of different root thirds. Eighty single-rooted human mandibular premolars were prepared by using the ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) to size F4, and a final irrigation regimen using 3% sodium hypochlorite and 17% EDTA was performed. The specimens were randomly divided into 4 groups (n = 20) according to the final irrigation activation technique used as follows: no activation (control), manual dynamic activation (MDA), CanalBrush (Coltene Whaledent, Altststten, Switzerland) activation, and ultrasonic activation. Five specimens from each group were prepared for scanning electron microscopic observation to assess the smear layer removal after the final irrigation procedures. All remaining roots were then obturated with gutta-percha and AH Plus sealer. A push-out test was used to measure the bond strength between the root canal dentin and AH Plus sealer. The data obtained from the push-out test were analyzed using 2-way analysis of variance and Tukey post hoc tests. The bond strength values mostly decreased in the coronoapical direction (P < .001). In the coronal and middle thirds, ultrasonic activiation showed a higher bond strength than other groups (P < .05). In the apical third, MDA displayed the highest bond strength to root dentin (P < .05). The majority of specimens exhibited cohesive failures. The bond strength of AH Plus sealer to root canal dentin may improve with ultrasonic activation in the coronal and middle thirds and MDA in the apical third. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  10. [Ideas and methods of two-dimensional zebrafish model combined with chromatographic techniques in high-throughput screening of active anti-osteoporosis components of traditional Chinese medicines].

    Science.gov (United States)

    Wei, Ying-Jie; Jing, Li-Jun; Zhan, Yang; Sun, E; Jia, Xiao-Bin

    2014-05-01

    To break through the restrictions of the evaluation model and the quantity of compounds by using the two-dimensional zebrafish model combined with chromatographic techniques, and establish a new method for the high-throughput screening of active anti-osteoporosis components. According to the research group-related studies and relevant foreign literatures, on the basis of the fact that the zebrafish osteoporosis model could efficiently evaluate the activity, the zebrafish metabolism model could efficiently enrich metabolites and the chromatographic techniques could efficiently separate and analyze components of traditional Chinese medicines, we proposed that the inherent combination of the three methods is expected to efficiently decode in vivo and in vitro efficacious anti-osteoporosis materials of traditional Chinese medicines. The method makes it simple and efficient in the enrichment, separation and analysis on components of traditional Chinese medicines, particularly micro-components and metabolites and the screening anti-osteoporosis activity, fully reflects that efficacious materials of traditional Chinese medicines contain original components and metabolites, with characteristic of "multi-components, multi-targets and integral effect", which provides new ideas and methods for the early and rapid discovery of active anti-osteoporosis components of traditional Chinese medicines.

  11. Making Large Class Basic Histology Lectures More Interactive: The Use of Draw-Along Mapping Techniques and Associated Educational Activities

    Science.gov (United States)

    Kotzé, Sanet Henriët; Mole, Calvin Gerald

    2015-01-01

    At Stellenbosch University, South Africa, basic histology is taught to a combination class of almost 400 first-year medical, physiotherapy, and dietetic students. Many students often find the amount of work in basic histology lectures overwhelming and consequently loose interest. The aim was to determine if a draw-along mapping activity would…

  12. A feasibility study on active ultrasonic techniques for water into sodium leak detection on FBR steam generator units

    International Nuclear Information System (INIS)

    Girard, J.P.; Garnaud, P.; Journeau, C.; Demarais, R.

    1990-01-01

    In the framework of the European Fast Breeder Project one of the aims is to provide the ferritic straight tube steam generator with a fast and reliable leak detection system. The first studies of water sodium leaks, based on the passive listening of noise source, are described. Considerable experience has been acquired of this technique and one of the conclusions is that a high level of reliability may require a sophisticated surveillance algorithm. Further works on the subject should lead to demonstration phase in 1993-1995 on a real and representative steam generator unit in order to have the benefit of a long term run of the surveillance method prior to industrial use in a compulsory safety system. 1 ref., 10 figs

  13. Quality control of total alpha and beta activity analysis in water using the Proportional Counter of Gaseous Flux technique

    International Nuclear Information System (INIS)

    Neto, Alberto P.; Bastos, Thiago M.R.; Santos, Thiago O.; Filho, Crescêncio A.S.; França, Elvis J. de

    2017-01-01

    The analytical capacity of the CRCN (Centro Regional de Ciências Nucleares do Nordeste) for quantification of total alpha and beta concentrations in water samples using the Proportional Counter of Gaseous Flux is presented. To demonstrate the traceability of the results, the National Intercomparison Program (PNI) samples were used, promoted by the Institute of Radioprotection and Dosimetry (IRD) from which the Regional Nuclear Science Center of the Northeast (CRCN-NE) participates since 2011. The results reported to the PNI demonstrate the analytical capacity of the CRCN to detect the emission of alpha and beta radioactivities in water within the potability standards in analytical detection of quantification in radioactivity by the technique of the Proportional Flow Counter

  14. Comparison of different CCD detectors and chemometrics for predicting total anthocyanin content and antioxidant activity of mulberry fruit using visible and near infrared hyperspectral imaging technique.

    Science.gov (United States)

    Huang, Lingxia; Zhou, Yibin; Meng, Liuwei; Wu, Di; He, Yong

    2017-06-01

    This study investigated the potential of using hyperspectral imaging technique in tandem with chemometrics for rapid and invasive predicting total anthocyanin content and antioxidant activity of mulberry fruit. Two calibration methods of partial least square regression and least-squares support vector machines and three wavelength selection algorithms of successive projections algorithm, uninformation variable elimination, and competitive adaptive reweighted sampling were applied. The best prediction models for the analysis of total anthocyanin content and antioxidant activity had R val 2 of 0.959 and 0.995 respectively. The performances of two CCD detectors named silicon (Si) and indium gallium arsenide (InGaAs) were compared. The results show that hyperspectral imaging has a great potential for the assessment of total anthocyanin content and antioxidant activity of mulberry fruit. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Techniques for determining the fluorine content of fluorochemical-treated fabrics by neutron activation using the 19F(n,2n)18F reaction

    International Nuclear Information System (INIS)

    Johnson, F.A.

    1982-01-01

    The 19 F(n,2n) 18 F reaction has been adapted to the analysis of fluorochemical-treated fabrics, using Teflon film as the reference standard. The ultimate success of the technique depends on effective retention of active recoil 18 F nuclei which can escape from both the fabric and the Teflon standards; this is accomplished by sealing all samples individually in thin Mylar film before activation. Recoil protons, produced in the fabric substrate, create a measurable amount of 18 F in the basic unfinished fabric through the 18 O(p,n) 18 F reaction. This compensates for systematic deficiencies encountered in measurement of the total 18 F-activity of the finished fabric. (author)

  16. Chromatographic finger print analysis of anti-inflammatory active extract fractions of aerial parts of Tribulus terrestris by HPTLC technique

    Science.gov (United States)

    Mohammed, Mona Salih; Alajmi, Mohamed Fahad; Alam, Perwez; Khalid, Hassan Subki; Mahmoud, Abelkhalig Muddathir; Ahmed, Wadah Jamal

    2014-01-01

    Objective To develop HPTLC fingerprint profile of anti-inflammatory active extract fractions of Tribulus terrestris (family Zygophyllaceae). Methods The anti-inflammatory activity was tested for the methanol and its fractions (chloroform, ethyl acetate, n-butanol and aqueous) and chloroform extract of Tribulus terrestris (aerial parts) by injecting different groups of rats (6 each) with carrageenan in hind paw and measuring the edema volume before and 1, 2 and 3 h after carrageenan injection. Control group received saline i.p. The extracts treatment was injected i.p. in doses of 200 mg/kg 1 h before carrageenan administration. Indomethacin (30 mg/kg) was used as standard. HPTLC studies were carried out using CAMAG HPTLC system equipped with Linomat IV applicator, TLC scanner 3, Reprostar 3, CAMAG ADC 2 and WIN CATS-4 software for the active fractions of chloroform fraction of methanol extract. Results The methanol extract showed good antiedematous effect with percentage of inhibition more than 72%, indicating its ability to inhibit the inflammatory mediators. The methanol extract was re-dissolved in 100 mL of distilled water and fractionated with chloroform, ethyl acetate and n-butanol. The four fractions (chloroform, ethyl acetate, n-butanol and aqueous) were subjected to anti-inflammatory activity. Chloroform fraction showed good anti-inflammatory activity at dose of 200 mg/kg. Chloroform fraction was then subjected to normal phase silica gel column chromatography and eluted with petroleum ether-chloroform, chloroform-ethyl acetate mixtures of increasing polarity which produced 15 fractions (F1-F15). Only fractions F1, F2, F4, F5, F7, F9, F11 and F14 were found to be active, hence these were analyzed with HPTLC to develop their finger print profile. These fractions showed different spots with different Rf values. Conclusions The different chloroform fractions F1, F2, F4, F5, F7, F9, F11 and F14 revealed 4, 7, 7, 8, 9, 7, 7 and 6 major spots, respectively. The

  17. Chromatographic finger print analysis of anti-inflammatory active extract fractions of aerial parts of Tribulus terrestris by HPTLC technique.

    Science.gov (United States)

    Mohammed, Mona Salih; Alajmi, Mohamed Fahad; Alam, Perwez; Khalid, Hassan Subki; Mahmoud, Abelkhalig Muddathir; Ahmed, Wadah Jamal

    2014-03-01

    To develop HPTLC fingerprint profile of anti-inflammatory active extract fractions of Tribulus terrestris (family Zygophyllaceae). The anti-inflammatory activity was tested for the methanol and its fractions (chloroform, ethyl acetate, n-butanol and aqueous) and chloroform extract of Tribulus terrestris (aerial parts) by injecting different groups of rats (6 each) with carrageenan in hind paw and measuring the edema volume before and 1, 2 and 3 h after carrageenan injection. Control group received saline i.p. The extracts treatment was injected i.p. in doses of 200 mg/kg 1 h before carrageenan administration. Indomethacin (30 mg/kg) was used as standard. HPTLC studies were carried out using CAMAG HPTLC system equipped with Linomat IV applicator, TLC scanner 3, Reprostar 3, CAMAG ADC 2 and WIN CATS-4 software for the active fractions of chloroform fraction of methanol extract. The methanol extract showed good antiedematous effect with percentage of inhibition more than 72%, indicating its ability to inhibit the inflammatory mediators. The methanol extract was re-dissolved in 100 mL of distilled water and fractionated with chloroform, ethyl acetate and n-butanol. The four fractions (chloroform, ethyl acetate, n-butanol and aqueous) were subjected to anti-inflammatory activity. Chloroform fraction showed good anti-inflammatory activity at dose of 200 mg/kg. Chloroform fraction was then subjected to normal phase silica gel column chromatography and eluted with petroleum ether-chloroform, chloroform-ethyl acetate mixtures of increasing polarity which produced 15 fractions (F1-F15). Only fractions F1, F2, F4, F5, F7, F9, F11 and F14 were found to be active, hence these were analyzed with HPTLC to develop their finger print profile. These fractions showed different spots with different Rf values. The different chloroform fractions F1, F2, F4, F5, F7, F9, F11 and F14 revealed 4, 7, 7, 8, 9, 7, 7 and 6 major spots, respectively. The results obtained in this experiment

  18. Trace detection of herbicides by SERS technique, using SERS-active substrates fabricated from different silver nanostructures deposited on silicon

    International Nuclear Information System (INIS)

    Dao, Tran Cao; Luong, Truc Quynh Ngan; Nguyen, Ngoc Hai; Kieu, Ngoc Minh; Luong, Thi Thuy; Cao, Tuan Anh; Le, Van Vu

    2015-01-01

    In this report we present the initial results of the use of different silver nanostructures deposited on silicon for trace detection of paraquat (a commonly used herbicide) using the surface-enhanced Raman scattering (SERS) effect. More specifically, the SERS-active substrates were fabricated from silver nanoparticles (AgNPs) deposited onto the flat surface of a silicon wafer (AgNPs@Si substrate), as well as on the surface of an obliquely aligned silicon nanowire (SiNW) array (AgNPs@SiNWs substrate), and from silver nanodendrites (AgNDs) deposited onto the flat surface of a silicon wafer (AgNDs@Si substrate). Results showed that with the change of the structure of the SERS-active substrate, higher levels of SERS enhancement have been achieved. Specifically, with the fabricated AgNDs@Si substrate, paraquat concentration as low as 1 ppm can be detected. (paper)

  19. Shear transformation zone activation during deformation in bulk metallic glasses characterized using a new indentation creep technique

    Science.gov (United States)

    J.B. Puthoff; H.B. Cao; Joseph E. Jakes; P.M. Voyles; D.S. Stone

    2009-01-01

    We have developed a novel type of nanoindentation creep experiment, called broadband nanoindentation creep (BNC), and used it to characterize the thermal activation of shear transformation zones (STZs) in three BMGs in the Zr-Cu-Al system. Using BNC, material hardness can be determined across a wide range of strain rates (10–4 to 10 s–...

  20. Characterization of archaeological ceramics from the north western lowland Maya Area, using the technique of neutron activation analysis

    International Nuclear Information System (INIS)

    Lopez R, M. C.; Tenorio, D.; Jimenez R, M.; Terreros, E.; Ochoa, L.

    2008-01-01

    It is a study on 50 samples of ceramics from various archaeological sites of the north western lowland Maya Area. This study was performed by neutron activation analysis of 19 chemical elements and the treatments relevant statistical data. Significant differences were found among the pieces that led to group them into five major groups, the difference is the site of their manufacture and therefore in the raw materials used for this. (Author)

  1. The Kinetic Activation-Relaxation Technique: A Powerful Off-lattice On-the-fly Kinetic Monte Carlo Algorithm

    OpenAIRE

    El-Mellouhi, fedwa; Mousseau, Normand; Lewis, Laurent J.

    2008-01-01

    Many materials science phenomena, such as growth and self-organisation, are dominated by activated diffusion processes and occur on timescales that are well beyond the reach of standard-molecular dynamics simulations. Kinetic Monte Carlo (KMC) schemes make it possible to overcome this limitation and achieve experimental timescales. However, most KMC approaches proceed by discretizing the problem in space in order to identify, from the outset, a fixed set of barriers that are used throughout t...

  2. Thermographic and histological analysis of rabbit different tenorrhaphies techniques (4 and 6 strands after early active mobilization

    Directory of Open Access Journals (Sweden)

    Rodrigo Arenhart

    Full Text Available Introduction This research is based on the results of the surgeries of tenorraphy, which have been improved due to the association between strong and not voluminous sutures and physiotherapic protocols, which preconize the early active motion to the postoperative period. Objective To evaluate the healing process in vivo in different types of tenorraphies. Methods Thirty-six rabbits that underwent early active motion after tenorraphy. The sample was constituted of 3 groups of 12, in accordance with the 3 different types of suture (Brasil, Indiana and Tsai. Results On the 15th and 30th days after the surgery, thermographic and histological analyses revealed similar results that all groups showed similar behaviors in the same time of surgical repair, just differentiating between the periods. On the 30th day analysis were observed that collagen fibers being more exuberant thickening, thus being able to offer higher tensile strength to the tendon. Conclusion That suggests early active motion may be increased gradually to around the 30th day taking this as clinical relevance.

  3. A self-centering active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines

    Science.gov (United States)

    Santolaria, J.; Brau, A.; Velázquez, J.; Aguilar, J. J.

    2010-05-01

    A crucial task in the procedure of identifying the parameters of a kinematic model of an articulated arm coordinate measuring machine (AACMM) or robot arm is the process of capturing data. In this paper a capturing data method is analyzed using a self-centering active probe, which drastically reduces the capture time and the required number of positions of the gauge as compared to the usual standard and manufacturer methods. The mathematical models of the self-centering active probe and AACMM are explained, as well as the mathematical model that links the AACMM global reference system to the probe reference system. We present a self-calibration method that will allow us to determine a homogeneous transformation matrix that relates the probe's reference system to the AACMM last reference system from the probing of a single sphere. In addition, a comparison between a self-centering passive probe and self-centering active probe is carried out to show the advantages of the latter in the procedures of kinematic parameter identification and verification of the AACMM.

  4. Optimization of the Kinetic Activation-Relaxation Technique, an off-lattice and self-learning kinetic Monte-Carlo method

    International Nuclear Information System (INIS)

    Joly, Jean-François; Béland, Laurent Karim; Brommer, Peter; Mousseau, Normand; El-Mellouhi, Fedwa

    2012-01-01

    We present two major optimizations for the kinetic Activation-Relaxation Technique (k-ART), an off-lattice self-learning kinetic Monte Carlo (KMC) algorithm with on-the-fly event search THAT has been successfully applied to study a number of semiconducting and metallic systems. K-ART is parallelized in a non-trivial way: A master process uses several worker processes to perform independent event searches for possible events, while all bookkeeping and the actual simulation is performed by the master process. Depending on the complexity of the system studied, the parallelization scales well for tens to more than one hundred processes. For dealing with large systems, we present a near order 1 implementation. Techniques such as Verlet lists, cell decomposition and partial force calculations are implemented, and the CPU time per time step scales sublinearly with the number of particles, providing an efficient use of computational resources.

  5. Report of Activity, 1996 - 1997. Vol. 3. General activities - Technical Research; Rapport d`activite 1996 - 1997. Tome 3. Activites generales - Recherches techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pouthas, Joel; Hutin, Christiane; Niogret Mathias [eds.] [Inst. de Physique Nucleaire, Paris-11 Univ., 91 - Orsay (France)

    1999-11-01

    This is the third tome of the Report of Activity of IPN - Orsay on 1996-1997. It deals with general activities and technical research. Summary reports and short communications are grouped in the following sections: 1 - Accelerators with the sub-divisions 1.1 - R and D on superconducting RF cavities; 1.2 - SPIRAL Project; 1.3 - Contribution to the LHC Project; 1.4 - Tandem; 2 - Targets, Sources and Injectors; 3 - Detectors and related instrumentation; 4 - Electronics; 5 - Data processing; 6 - Radioprotection and medical applications

  6. A Low-Power and In Situ Annealing Technique for the Recovery of Active Devices After Proton Irradiation

    Directory of Open Access Journals (Sweden)

    Francis Laurent A.

    2018-01-01

    Full Text Available In this paper, we study the recovery of onmembrane semiconductor components, such as N-type Field-Effect Transistors (FETs available in two different channel widths and a Complementary Metal-Oxide-Semiconductor (CMOS inverter, after the exposure to high dose of proton radiation. Due to the ionizing effect, the electrical characteristics of the components established remarkable shifts, where the threshold voltages showed an average shift of -480 mV and -280 mV respectively for 6 μm and 24 μm N-channel transistors, likewise the inversion point of the inverter showed an important shift of -690 mV. The recovery concept is based mainly on a micro-hotplate, fabricated with backside MEMS micromachining structure and a Silicon-On-Insulator (SOI technology, ensuring rapid, low power and in situ annealing technique, this method proved its reliability in recent works. Annealing the N-channel transistors and the inverter for 16 min with a temperature of the heater up to 385 °C, guaranteed a partial recovery of the semiconductor based components with a maximum power consumption of 66 mW.

  7. Techniques for Clutter Suppression in the Presence of Body Movements during the Detection of Respiratory Activity through UWB Radars

    Directory of Open Access Journals (Sweden)

    Antonio Lazaro

    2014-02-01

    Full Text Available This paper focuses on the feasibility of tracking the chest wall movement of a human subject during respiration from the waveforms recorded using an impulse-radio (IR ultra-wideband radar. The paper describes the signal processing to estimate sleep apnea detection and breathing rate. Some techniques to solve several problems in these types of measurements, such as the clutter suppression, body movement and body orientation detection are described. Clutter suppression is achieved using a moving averaging filter to dynamically estimate it. The artifacts caused by body movements are removed using a threshold method before analyzing the breathing signal. The motion is detected using the time delay that maximizes the received signal after a clutter removing algorithm is applied. The periods in which the standard deviations of the time delay exceed a threshold are considered macro-movements and they are neglected. The sleep apnea intervals are detected when the breathing signal is below a threshold. The breathing rate is determined from the robust spectrum estimation based on Lomb periodogram algorithm. On the other hand the breathing signal amplitude depends on the body orientation respect to the antennas, and this could be a problem. In this case, in order to maximize the signal-to-noise ratio, multiple sensors are proposed to ensure that the backscattered signal can be detected by at least one sensor, regardless of the direction the human subject is facing. The feasibility of the system is compared with signals recorded by a microphone.

  8. A Low-Power and In Situ Annealing Technique for the Recovery of Active Devices After Proton Irradiation

    Science.gov (United States)

    Francis, Laurent A.; Sedki, Amor; André, Nicolas; Kilchytska, Valéria; Gérard, Pierre; Ali, Zeeshan; Udrea, Florin; Flandre, Denis

    2018-01-01

    In this paper, we study the recovery of onmembrane semiconductor components, such as N-type Field-Effect Transistors (FETs) available in two different channel widths and a Complementary Metal-Oxide-Semiconductor (CMOS) inverter, after the exposure to high dose of proton radiation. Due to the ionizing effect, the electrical characteristics of the components established remarkable shifts, where the threshold voltages showed an average shift of -480 mV and -280 mV respectively for 6 μm and 24 μm N-channel transistors, likewise the inversion point of the inverter showed an important shift of -690 mV. The recovery concept is based mainly on a micro-hotplate, fabricated with backside MEMS micromachining structure and a Silicon-On-Insulator (SOI) technology, ensuring rapid, low power and in situ annealing technique, this method proved its reliability in recent works. Annealing the N-channel transistors and the inverter for 16 min with a temperature of the heater up to 385 °C, guaranteed a partial recovery of the semiconductor based components with a maximum power consumption of 66 mW.

  9. Comparison of neurotoxicity of root canal sealers on spontaneous bioelectrical activity in identified Helix neurones using an intracellular recording technique.

    Science.gov (United States)

    Asgari, S; Janahmadi, M; Khalilkhani, H

    2003-12-01

    To evaluate the neurotoxic effects of two endodontic sealers, AH-26 and Roth 801, on firing excitability and action potential configuration of F1 neural cells in the suboesophageal ganglia of Helix aspersa. A conventional intracellular current clamp technique was used to study the blocking effects of AH-26 and Roth 801 on ionic currents underlying the action potential of F1 nerve cells. The sealers were prepared according to the manufacturers' directions and were applied to the bathing media in two ways: invasive (0.05 mL of total mixture of each sealer was applied at a distance of 3 mm from the cell), or gradual (0.05 mL of the extract of each dissolved mixture of sealers in normal Ringers solution was perfused). When applied in an invasive mode, both sealers reduced the duration, the amplitude of action potentials and the amplitude of after-hyperpolarization potentials significantly and led to dramatic changes in action potential configuration. In the gradual mode of application, AH-26 showed a biphasic action; it first increased the excitability and then decreased the action potential parameters, while Roth 801 exhibited solely blocking effects. Both sealers had significant inhibitory effects on excitability of F1 neuronal cells.

  10. Capillary electrophoresis finger print technique (CE-SSCP): an alternative tool for the monitoring activities of HAB species in Baja California Sur Costal.

    Science.gov (United States)

    Herrera-Sepúlveda, Angélica; Hernandez-Saavedra, Norma Y; Medlin, Linda K; West, Nyree

    2013-10-01

    In Mexican waters, there is no a formal and well-established monitoring program of harmful algal blooms (HAB) events. Until now, most of the work has been focused on the characterization of organisms present in certain communities. Therefore, the development of new techniques for the rapid detection of HAB species is necessary. Capillary electrophoresis finger print technique (CE-SSCP) is a fingerprinting technique based on the identification of different conformers dependent of its base composition. This technique, coupled with capillary electrophoresis, has been used to compare and identify different conformers. The aim of this study was to determine if CE-SSCP analysis of ribosomal RNA (rRNA) gene fragments could be used for a rapid identification of toxic and harmful HAB species to improve monitoring activities along the coasts of Baja California Sur, Mexico.Three different highly variable regions of the 18S and 28S rRNA genes were chosen and their suitability for the discrimination of different dinoflagellate species was assessed by CE-SSCP.The CE-SSCP results obtained for the LSU D7 fragment has demonstrated that this technique with this gene region could be useful for the identification of the ten dinoflagellates species of different genera.We have shown that this method can be used to discriminate species and the next step will be to apply it to natural samples to achieve our goal of molecular monitoring for toxic algae in Mexican waters. This strategy will offer an option to improve an early warning system of HAB events for coastal BCS, allowing the possible implementation of mitigation strategies. A monitoring program of HAB species using molecular methods will permit the analysis of several samples in a short period of time, without the pressure of counting with a taxonomic expert in phytoplankton taxonomy.

  11. Behavioral Activation and Therapeutic Exposure: An Investigation of Relative Symptom Changes in PTSD and Depression during the Course of Integrated Behavioral Activation, Situational Exposure, and Imaginal Exposure Techniques

    Science.gov (United States)

    Gros, Daniel F.; Price, Matthew; Strachan, Martha; Yuen, Erica K.; Milanak, Melissa E.; Acierno, Ron

    2012-01-01

    Effectiveness of exposure therapy for posttraumatic stress disorder (PTSD) may be adversely influenced by comorbid disorders. The present study investigated behavioral activation and therapeutic exposure (BA-TE), a new integrated treatment designed specifically for comorbid symptoms of PTSD and depression. Combat veterans with PTSD (N = 117)…

  12. Extraction of Natural Antioxidants from the Thelephora ganbajun Mushroom by an Ultrasound-Assisted Extraction Technique and Evaluation of Antiproliferative Activity of the Extract against Human Cancer Cells.

    Science.gov (United States)

    Xu, Dong-Ping; Zheng, Jie; Zhou, Yue; Li, Ya; Li, Sha; Li, Hua-Bin

    2016-10-01

    The Thelephora ganbajun mushroom has been found to be a potential rich source of natural antioxidants. In this study, an ultrasound-assisted extraction (UAE) technique together with GRAS (generally recognized as safe) solvents (ethanol and water) was used to maximize the extraction of antioxidants from Thelephora ganbajun . Five extraction parameters (ethanol concentration, solvent to solid ratio, extraction time, temperature and ultrasound power) were investigated by single-factor experiments, and then a central composite rotatable design was employed to study interaction of three key extraction parameters. The optimum conditions were as follows: 57.38% ethanol, 70.15 mL/g solvent to solid ratio, 10.58 min extraction time, 40 °C extraction temperature and 500 W ultrasound power. Under the optimum conditions, the antioxidant activity obtained was 346.98 ± 12.19 µmol Trolox/g DW, in accordance with the predicted value of 344.67 µmol Trolox/g DW. Comparison of UAE with conventional maceration and Soxhlet extraction, the UAE method showed stronger extract efficiency in a shorter extraction time. These results showed that UAE was an effective technique to extract antioxidants from Thelephora ganbajun . Furthermore, the extracts obtained under the optimized conditions exhibited antiproliferative activities toward human lung (A549), breast (MCF-7), liver (HepG2) and colon (HT-29) cancer cells, especially for liver and lung cancer cells. In addition, rutin, 2-hydrocinnamic acid and epicatechin were identified in the extract, which might contribute to antioxidant and antiproliferative activities.

  13. Biological activity and mechanical stability of sol-gel-based biofilters using the freeze-gelation technique for immobilization of Rhodococcus ruber.

    Science.gov (United States)

    Pannier, Angela; Mkandawire, Martin; Soltmann, Ulrich; Pompe, Wolfgang; Böttcher, Horst

    2012-02-01

    Biofilters with long lifetime and high storage stability are very important for bioremediation processes to ensure the readiness at the occurrence of sudden contaminations. By using the freeze-gelation technique, living cells can be immobilized within a mechanically and chemically stable ceramic-like matrix. Due to a freeze-drying step, the embedded microorganisms are converted into a preserved form. In that way, they can be stored under dry conditions, which comply better with storage, transport, and handling requirements. Thus, in contrast to other immobilization techniques, there is no need for storage in liquid or under humid atmosphere. The biological activity, mechanical strength, and the structure of the biologically active ceramic-like composites (biocers) produced by freeze gelation have been investigated by using the phenol-degrading bacteria Rhodococcus ruber as model organism. Samples of freeze-gelation biocers have been investigated after defined storage periods, demonstrating nearly unchanged mechanical strength of the immobilization matrix as well as good storage stability of the activity of the immobilized cells over several months of storage at 4 °C. Repeated-batch tests demonstrated further that the freeze-gelation biocers can be repeatedly used over a period of more than 12 months without losing its bioactivity. Thus, these results show that freeze-gelation biocers have high potential of being scaled up from laboratory test systems to applications in real environment because of their long bioactivity as well as mechanical stability.

  14. Advanced foil activation techniques for the measurement of within-pin distributions of the 63Cu(n,γ)64Cu reaction rate in nuclear fuel

    International Nuclear Information System (INIS)

    Macku, K.; Jatuff, F.; Murphy, M.F.; Joneja, O.P.; Bischofberger, R.; Chawla, R.

    2006-01-01

    Different foil activation techniques have been used for measuring spatial distributions of the 63 Cu(n,γ) 64 Cu reaction within two pins of a SVEA-96 Optima2 boiling water reactor fuel assembly, at the critical facility PROTEUS. This reaction is of interest because its 1/v cross-section gives it a good representation of the 235 U fission rate. Initially, radial capture rate profiles were measured with mechanically punched copper foils. More detailed profiles were then determined by using a 0.2 mm copper wire spiral (∼200 μm resolution), as well as 5-, 10-, and 20-ring UV-lithography, electroplating, and molding (UV-LIGA) foils (up to a 100 μm resolution). For azimuthal measurements, apart from manually cut activation foils (into 8 sectors), 8- and 12-sector LIGA foils were used. The highly versatile LIGA foils have the additional advantage of being very easily separated into individual pieces after irradiation without the use of punches or other cutting tools. In order to account for the invasive character of the foil activation techniques, corrections to account for sample perturbations and for self-shielding effects were determined via simplified Monte Carlo (MCNP4C) modeling of the experimental setup. The final results from the various measurements of 63 Cu(n,γ) 64 Cu within-pin distributions have been compared with MCNP computations employing a detailed model of the full SVEA Optima2 fuel assembly

  15. Assessment of metal and trace element concentrations in the Cananeia estuary, Brazil, by neutron activation and atomic absorption techniques

    International Nuclear Information System (INIS)

    Amorim, E.P.; Favaro, D.I.T.; Berbel, G.B.B.; Braga, E.S.

    2008-01-01

    Twenty six bottom sediment samples were collected from the Cananeia estuary in summer and winter of 2005. Multielemental analysis was carried out by instrumental neutron activation analysis. Total mercury was determined by cold vapor atomic absorption. As, Cr, Hg and Zn concentrations were compared to the Canadian oriented values (TEL and PEL). Sample points 4 and 9 presented higher concentration for most elements and As and Cr exceeded the TEL values. Organic matter (>10%) associated with siltic and clay sediments was observed. Climatic conditions, hydrodynamic and biogeochemical processes promote differences in seasonal concentrations of elements at some points, which contribute to special distributions. (author)

  16. Elemental investigation of (Al-Cu) alloys and some geological samples using neutron activation and XRF analysis techniques

    International Nuclear Information System (INIS)

    Hammad, E.A.M.

    2012-01-01

    Neutron activation analysis (NAA) using k 0 - standardization (k 0 -NAA) is well known method for multi-elemental analysis. The method is used to analyze different samples belonging to different fields. In addition, X- ray fluorescence (XRF) is also used for multi-elemental analysis. XRF complements NAA methods. Both methods were used for investigation of some iron ores and aluminum- cupper alloy (Al-Cu) samples. Elemental concentration of Iron ores and Al-Cu alloy samples were determined by k 0 - NAA and XRF methods. The iron ore samples were collected from Wadi Kareim and Umm Nar sites (the Eastern desert of Egypt). Six and two samples representing the ores of Wadi Kareim and Umm Nar, respectively altogether with the standard samples consisting of Fe, Au , Zr and W and the certified reference sample IAEA Soil-7 were irradiated in one of the irradiated boxes at the Second Egyptian Research Reactor (ETRR- 2). The induced activities were counted using an efficiency calibrated HPGe detector systems. The neutron spectrum parameters α and f characterizing the neutron irradiation position that are needed in applying k 0 -NAA method were determined using the activation product of Zr , Au, Fe and W and found α≅ - 0.048 ±0.002 and f ≅ 38± k 0 -NAA method was applied to determine the elemental concentrations in the two iron ore samples. The concentrations determined were found to vary erratically form one sample to another. The results were discussed and compared with similar results in literature. The accuracy of the k 0 - NAA method was checked by determining the elemental concentration in the IAEA-Soil 7 reference sample. The obtained results are compared with the recommended values. Good agreements were found within 10 %. Short time neutron activation analysis (STNAA) was carried out to determine concentration of major elements in Al-Cu alloy samples. Three (Al-Cu) alloys samples with different concentrations of Cu (2, 3.5 and 5 %) altogether. Au standard sample

  17. Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of technique protocol and photo-activation strategies.

    Science.gov (United States)

    Münchow, Eliseu Aldrighi; Meereis, Carine Tais Welter; de Oliveira da Rosa, Wellington Luiz; da Silva, Adriana Fernandes; Piva, Evandro

    2018-03-08

    A systematic review was conducted to determine whether there were any alternative technique or additional step strategies available to reduce and control polymerization shrinkage stress development in dental resin-based restorative materials. This report followed the PRISMA Statement. A total of 36 studies were included in this review. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO. Only in vitro studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis or mathematical models were excluded. Of the 6.113 eligible articles, 36 studies were included in the qualitative analysis, and the meta-analysis was performed with 25 studies. A global comparison was performed with random-effects models (α = 0.05). The strategies were subdivided as follows: the use of an alternative technique protocol of placing the material inside the tooth cavity; the modification of the irradiation intensity or total energy delivered to the material; the use of an alternative light-curing source; or the use of an alternative photo-activation mode. All alternative strategies showed statistically significant differences when compared with their respective controls (p material by means of an alternative technique protocol or by modifying the irradiant intensity or total energy delivered to the material during photo-activation. Moreover, the use of an alternative photo-activation mode (intermittent light, exponential, soft-start or pulse delay modes) was shown to be an effective strategy for reducing and controlling stress development in resin-based dental materials. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. The acute effect of neuromuscular activation in resistance exercise on human skeletal muscle with the interpolated twitch technique.

    Science.gov (United States)

    Lee, Dae-Yeon; Yoon, Wan-Young

    2015-09-01

    [Purpose] The purpose of this study was to perform a quantitative assessment of neuromechanical adaptation in skeletal muscles and to propose the scientific underpinnings of the acute effects induced by resistance exercise. [Subjects] The subjects in this study were 11 healthy adult men in their 20s who had no orthopedic history at the time of the study. To examine any signs of resistance exercise-induced changes in the ankle plantar flexor, the subjects were directed to perform a standing barbell calf raise routine. [Methods] Subjects were to carry a load equal to their weights and to perform five sets of ten repetitions. The maximal voluntary isometric contraction torque, resting twitch torque, muscle inhibition, root mean square of muscular activation, contraction time, and half relaxation time were analyzed by synchronizing a dynamometer, an electrical stimulator, and an electromyography system. [Results] The maximal voluntary isometric contraction torque appeared to decline, but the change was not statistically significant. The decline of resting twitch torque, on the other hand, was found to be statistically significant. Muscle inhibition and root mean square of muscular activation were both reduced, but both changes were not statistically significant. Lastly, contraction time and half relaxation time both statistically decreased significantly after resistance exercise. [Conclusion] These results indicate that the acute effects of resistance exercise have a greater impact on the peripheral mechanical system itself, rather than on neurological factors, in terms of the generation of muscle force.

  19. A systematic literature review of reviews on techniques for physical activity measurement in adults: a DEDIPAC study.

    Science.gov (United States)

    Dowd, Kieran P; Szeklicki, Robert; Minetto, Marco Alessandro; Murphy, Marie H; Polito, Angela; Ghigo, Ezio; van der Ploeg, Hidde; Ekelund, Ulf; Maciaszek, Janusz; Stemplewski, Rafal; Tomczak, Maciej; Donnelly, Alan E

    2018-02-08

    The links between increased participation in Physical Activity (PA) and improvements in health are well established. As this body of evidence has grown, so too has the search for measures of PA with high levels of methodological effectiveness (i.e. validity, reliability and responsiveness to change). The aim of this "review of reviews" was to provide a comprehensive overview of the methodological effectiveness of currently employed measures of PA, to aid researchers in their selection of an appropriate tool. A total of 63 review articles were included in this review, and the original articles cited by these reviews were included in order to extract detailed information on methodological effectiveness.Self-report measures of PA have been most frequently examined for methodological effectiveness, with highly variable findings identified across a broad range of behaviours. The evidence-base for the methodological effectiveness of objective monitors, particularly accelerometers/activity monitors, is increasing, with lower levels of variability observed for validity and reliability when compared to subjective measures. Unfortunately, responsiveness to change across all measures and behaviours remains under-researched, with limited information available.Other criteria beyond methodological effectiveness often influence tool selection, including cost and feasibility. However, researchers must be aware of the methodological effectiveness of any measure selected for use when examining PA. Although no "perfect" tool for the examination of PA in adults exists, it is suggested that researchers aim to incorporate appropriate objective measures, specific to the behaviours of interests, when examining PA in free-living environments.

  20. Microbial and molecular techniques to evaluate and to implement in-situ biodegradation potential and activity at sites contaminated with aromatic and chlorinated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Karg, F. [HPC Envirotec / France and HPC AG (Germany); Henkler, Ch. [Planreal (Switzerland)

    2005-07-01

    Intrinsic bio-remediation harnesses the ability of indigenous microorganisms to degrade contaminants that are present in soil and groundwater. Over the past decade many environmental regulatory agencies especially in Europe have come to recognize the importance of these natural processes in contaminant attenuation. In order to use in-situ bio-remediation to clean up a site successfully it is necessary to investigate the indigenous microbial population and its potential activity to degrade the contaminants of concern (COCs). The evaluation of naturally-occurring degradative activity in initial screening of soil and groundwater samples using recently developed molecular and microbial methods may allow for the implementation of a contaminant reduction and management program without the need for fully engineered remediation intervention. Limited engineering approaches (nutrient delivery etc.) can be implemented to support naturally-occurring bio-restoration processes to achieve a controlled, dynamic attenuation of COCs. Techniques for monitoring pollutant-degrading microorganisms were previously limited to standard culturing techniques. More recently, techniques based upon detection of genetic elements and metabolic activities have been developed in collaboration with university partners Europe, especially in France. The modern techniques are more sensitive for monitoring microbial populations, metabolic activity and the genetic potential to degrade the COCs, and avoid the need for cultivation of microbes under artificial conditions in the laboratory. Especially the application of PCR-Tests (Polymerase Chain Reaction) are able to quantify the Genetic Potential of Pollutant Microbiological Degradation on a contaminated site. This enables to use very economic in-situ site rehabilitation strategies as for example (Dynamic Natural Attenuation). For this modern application of these new strategies PLANREAL created with HPC Envirotec and together with a French University

  1. Characteristics of intercommunications of sport results and indexes of technique and tactic of competition activity of highly qualified sportsmen of karate-do.

    Directory of Open Access Journals (Sweden)

    Baranov M.V.

    2011-02-01

    Full Text Available The effectiveness of the individualization of technical and tactical training of athletes of karate-offensive, maneuver, and expectant management style duels. By analyzing the competitive activities of representatives of these styles, world and European champion 2007-2009 classification features were identified techniques and tactics of karate-do and established differences in their use of technical-tactical vehicles. Results of correlation analysis of the relationship of sports results and performance of technical and tactical actions of these athletes can determine the direction of individualization of training in different styles of karate fights.

  2. Application of industrial hygiene techniques for work-place exposure assessment protocols related to petro-chemical exploration and production field activities

    International Nuclear Information System (INIS)

    Koehn, J.

    1995-01-01

    Standard industrial hygiene techniques for recognition, evaluation, and control can be directly applied to development of technical protocols for workplace exposure assessment activities for a variety of field site locations. Categories of occupational hazards include chemical and physical agents. Examples of these types of hazards directly related to oil and gas exploration and production workplaces include hydrocarbons, benzene, oil mist, hydrogen sulfide, Naturally Occurring Radioactive Materials (NORM), asbestos-containing materials, and noise. Specific components of well process chemicals include potential hazardous chemical substances such as methanol, acrolein, chlorine dioxide, and hydrochloric acid. Other types of exposure hazards may result from non-routine conduct of sandblasting and painting operations

  3. Achievements 2006-Activities 2007: Feasibility study on the application of the sterile insect technique for the establishment of a zone free of tsetse flies

    International Nuclear Information System (INIS)

    Sall, Baba

    2007-01-01

    The Project ''Feasibility study on the application of the sterile insect technique for the creation of a zone free of tsetse flies'' aims to eradicate the tsetse fly and the trypanosomiasis it transmits from the Niayes area and part of the small coast. These areas were re-infested after several decades of lull following the eradication campaigns of the 1970s and 1980s. The project began in 2006 for a period of 4 years.This document presents the achievements of 2006 and the activities planned in 2007 within the framework of the project.

  4. Single- and multi-foils {sup 27}Al(p,3pn){sup 24}Na activation technique for monitoring the intensity of high-energy beams

    Energy Technology Data Exchange (ETDEWEB)

    Curioni, A. [CERN, 1211 Geneva 23 (Switzerland); Politecnico di Milano, Department of Energy, 20156 Milan (Italy); Froeschl, R.; Glaser, M. [CERN, 1211 Geneva 23 (Switzerland); Iliopoulou, E. [CERN, 1211 Geneva 23 (Switzerland); Medical Physics Laboratory, School of Medicine, Aristotle University of Thessaloniki (Greece); La Torre, F.P. [CERN, 1211 Geneva 23 (Switzerland); Pozzi, F., E-mail: fabio.pozzi@cern.ch [CERN, 1211 Geneva 23 (Switzerland); Ravotti, F.; Silari, M. [CERN, 1211 Geneva 23 (Switzerland)

    2017-06-21

    This paper discusses an experimental study of the spallation reaction {sup 27}Al(p,3pn){sup 24}Na in Al foils exposed to 24 GeV c{sup −1} protons, in the context of monitoring the intensity of multi-GeV proton beams through foil activation techniques. Since this reaction is sensitive to secondary neutrons and other energetic secondary hadrons, it is important to evaluate the impact of the foil thickness on the calculation of the beam intensity. This effect is determined experimentally using a stack of Al foils of varying thickness. The experimental results are then compared to Monte Carlo simulations.

  5. Microbial and molecular techniques to evaluate and to implement in-situ biodegradation potential and activity at sites contaminated with aromatic and chlorinated hydrocarbons

    International Nuclear Information System (INIS)

    Karg, F.; Henkler, Ch.

    2005-01-01

    Intrinsic bio-remediation harnesses the ability of indigenous microorganisms to degrade contaminants that are present in soil and groundwater. Over the past decade many environmental regulatory agencies especially in Europe have come to recognize the importance of these natural processes in contaminant attenuation. In order to use in-situ bio-remediation to clean up a site successfully it is necessary to investigate the indigenous microbial population and its potential activity to degrade the contaminants of concern (COCs). The evaluation of naturally-occurring degradative activity in initial screening of soil and groundwater samples using recently developed molecular and microbial methods may allow for the implementation of a contaminant reduction and management program without the need for fully engineered remediation intervention. Limited engineering approaches (nutrient delivery etc.) can be implemented to support naturally-occurring bio-restoration processes to achieve a controlled, dynamic attenuation of COCs. Techniques for monitoring pollutant-degrading microorganisms were previously limited to standard culturing techniques. More recently, techniques based upon detection of genetic elements and metabolic activities have been developed in collaboration with university partners Europe, especially in France. The modern techniques are more sensitive for monitoring microbial populations, metabolic activity and the genetic potential to degrade the COCs, and avoid the need for cultivation of microbes under artificial conditions in the laboratory. Especially the application of PCR-Tests (Polymerase Chain Reaction) are able to quantify the Genetic Potential of Pollutant Microbiological Degradation on a contaminated site. This enables to use very economic in-situ site rehabilitation strategies as for example (Dynamic Natural Attenuation). For this modern application of these new strategies PLANREAL created with HPC Envirotec and together with a French University

  6. Elemental analysis of soil and plant samples at El-Manzala lake neutron activation analysis technique. Vol. 4

    International Nuclear Information System (INIS)

    Eissa, E.A.; Rofail, N.B.; Hassan, A.M.; Abd El-Haleem, A.S.; El-Abbady, W.H.

    1996-01-01

    Soil and plant samples were collected from from two locations, Bahr El-Baker, and Bahr kados at the manzala lake, where, where high pollution is expected. The samples were especially treated and prepared for investigation by thermal neutron activation analysis (NAA). The irradiation facilities of the first egyptian research reactor (ET-R R-1), and the hyper pure germanium (HPGe) detection system were used for analysis. Among the 34 identified Fe, Co, As, Cd, Te, La, Sm, Rb, Hg, Th, and U are of a special significance because of the their toxic deleterious impact on living organisms. This work is part of a research project concerning pollution studies on the river Nile and some lakes of egypt. The data obtained in the present work stands as a reference basic record for any future follow up of contamination level. 1 tab

  7. Effect of Azospirillum brasilense and Burkholderia unamae Bacteria on Maize Photosynthetic Activity Evaluated Using the Photoacoustic Technique

    Science.gov (United States)

    Gordillo-Delgado, F.; Marín, E.; Calderón, A.

    2016-09-01

    In this work, the photosynthetic process of maize plants ( Zea mays), which were grown using seeds inoculated with plant growth promoting bacteria Azospirillum brasilense and Burkholderia unamae, was monitored. Photothermal and photobaric signals obtained by a time-resolved photoacoustic measurement configuration were used for measuring the oxygen evolution rate in situ. A frequency-resolved configuration of the method was utilized to determine the oxygen diffusion coefficient and the thermal diffusivity of the maize leaves. The latter parameters, which can be used as indicators of the photosynthetic activity of maize, are found to vary according to the plant-microbe interaction. Treatment with plant growth promoting bacteria induced a decrease in the oxygen diffusion coefficient of about 20 %.

  8. Detection of spallation neutrons and protons using the natCd activation technique in transmutation experiments at Dubna

    International Nuclear Information System (INIS)

    Manolopoulou, M.; Stoulos, S.; Fragopoulou, M.; Brandt, R.; Westmeier, W.; Krivopustov, M.; Sosnin, A.; Zamani, M.

    2006-01-01

    Various spallation sources have been used to transmute long-lived radioactive waste, mostly making use of the wide energy neutron fluence. In addition to neutrons, a large number of protons and gamma rays are also emitted from these sources. In this paper nat Cd is proved to be a useful activation detector for determining both thermal-epithermal neutron as well as secondary proton fluences. The fluences measured with nat Cd compared with other experimental data and calculations of DCM-DEM code were found to be in reasonable agreement. An accumulation of therma-epithermal neutrons around the center of the target (i.e. after approx. 10 cm) and of secondary protons towards the end of the target is observed

  9. Quality control of baby food products on the basis of results obtained using the instrumental neutron-activation analysis technique

    International Nuclear Information System (INIS)

    Mukhammedov, S.; Khaydarov, A.; Pardaev, O.

    2013-01-01

    The purpose of this study was to use the instrumental neutron-activation analysis (INAA) to determine the elemental composition of some kind of imported baby food products (BFP) and to compare the results with the permissible contents. The nuclear reactor WWR-SM of INP has been used to develop INAA to study the mineral composition of some children's food products. The concentration of 26 trace elements, including Mg, Ca, Fe, Zn, etc. was found. The comparison of the results with regulation contents and the daily data on food needs have shown that the investigated group of BFP does not meet the requirements for all trace and macro elements composition. (authors)

  10. Using Online Active-Learning Techniques to Convey Time Compensated Sun Compass Orientation in the Eastern North American Monarch

    Directory of Open Access Journals (Sweden)

    Noah Hammond Green

    2016-12-01

    Full Text Available A common tool that animals use to navigate in a constant direction is known as “time compensated sun compass orientation.” This is a process by which animals use the position of the sun along with information from their internal circadian clocks to determine and maintain a directional heading. Many circadian scientists and educators use this process as an example of how the internal circadian clock can directly influence animal behavior. However, many students have difficulty grasping this biological process due to its multivariable nature. We have created an online module that uses the principles of active learning to facilitate student comprehension of this process. Our module contains instructional videos, practice problems and an interactive diagram. We implemented the module in an undergraduate biological clocks class at Vanderbilt University, where its use significantly improved students’ understanding of time compensated sun compass orientation as well as their ability to solve complex problems involving principles associated with this process.

  11. Measurement of waterborne radon in the drinking water of the Dera Ismail Khan city using active and passive techniques

    Directory of Open Access Journals (Sweden)

    Nasir Tabassum

    2015-01-01

    Full Text Available Groundwater is considered to be the second largest contributor to the indoor radon concentration after soil. Therefore, measurement of waterborne radon has remained a point of interest for many researchers. The main objective of this study is to study waterborne radon activity in the city of Dera Ismail Khan. In this context, water samples were collected from different locations of the city and waterborne radon was measured using a pylon vacuum water degassing system and CR-39 based radon detectors. The pylon system measured waterborne radon activities in samples of hand pumps and motor driven pumps varying from 0.015 to 0.066 Bq/L and 0.021 to 0.145 Bq/L with average values of 0.041 ± 0.015 Bq/L and 0.076 ± 0.024 Bq/L, respectively. Whereas CR-39 based measured values ranged from 0.042 to 0.125 Bq/L and 0.075 to 0.158 Bq/L with average values of 0.081 ± 0.021 Bq/L and 0.120 ± 0.020 Bq/L, respectively. The estimated average annual effective dose due to ingestion of radon from drinking water using pylon and CR-39 based radon detectors for hand and motor pump samples was found to be 1.055×10-4 mSv and 1.947×10-4 mSv, and 2.067×10-4 mSv and 3.058×10-4 mSv, respectively. The waterborne radon concentrations and as a result the annual effective dose expected to be received from it are within the recommended safe limits.

  12. Efficacy of physical activity interventions in post-natal populations: systematic review, meta-analysis and content coding of behaviour change techniques.

    Science.gov (United States)

    Gilinsky, Alyssa Sara; Dale, Hannah; Robinson, Clare; Hughes, Adrienne R; McInnes, Rhona; Lavallee, David

    2015-01-01

    This systematic review and meta-analysis reports the efficacy of post-natal physical activity change interventions with content coding of behaviour change techniques (BCTs). Electronic databases (MEDLINE, CINAHL and PsychINFO) were searched for interventions published from January 1980 to July 2013. Inclusion criteria were: (i) interventions including ≥1 BCT designed to change physical activity behaviour, (ii) studies reporting ≥1 physical activity outcome, (iii) interventions commencing later than four weeks after childbirth and (iv) studies including participants who had given birth within the last year. Controlled trials were included in the meta-analysis. Interventions were coded using the 40-item Coventry, Aberdeen & London - Refined (CALO-RE) taxonomy of BCTs and study quality assessment was conducted using Cochrane criteria. Twenty studies were included in the review (meta-analysis: n = 14). Seven were interventions conducted with healthy inactive post-natal women. Nine were post-natal weight management studies. Two studies included women with post-natal depression. Two studies focused on improving general well-being. Studies in healthy populations but not for weight management successfully changed physical activity. Interventions increased frequency but not volume of physical activity or walking behaviour. Efficacious interventions always included the BCTs 'goal setting (behaviour)' and 'prompt self-monitoring of behaviour'.

  13. The AmeriFlux Data Activity and Data System: An Evolving Collection of Data Management Techniques, Tools, Products and Services

    Energy Technology Data Exchange (ETDEWEB)

    Boden, Thomas A [ORNL; Krassovski, Misha B [ORNL; Yang, Bai [ORNL

    2013-01-01

    The Carbon Dioxide Information Analysis Center (CDIAC) at Oak Ridge National Laboratory (ORNL), USA has provided scientific data management support for the U.S. Department of Energy and international climate change science since 1982. Over this period, climate change science has expanded from research focusing on basic understanding of geochemical cycles, particularly the carbon cycle, to integrated research addressing climate change impacts, vulnerability, adaptation, and mitigation. Interests in climate change data and information worldwide have grown remarkably and, as a result, so have demands and expectations for CDIAC s data systems. To meet the growing demands, CDIAC s strategy has been to design flexible data systems using proven technologies blended with new, evolving technologies and standards. CDIAC development teams are multidisciplinary and include computer science and information technology expertise, but also scientific expertise necessary to address data quality and documentation issues and to identify data products and system capabilities needed by climate change scientists. CDIAC has learned there is rarely a single commercial tool or product readily available to satisfy long-term scientific data system requirements (i.e., one size does not fit all and the breadth and diversity of environmental data are often too complex for easy use with commercial products) and typically deploys a variety of tools and data products in an effort to provide credible data freely to users worldwide. Like many scientific data management applications, CDIAC s data systems are highly customized to satisfy specific scientific usage requirements (e.g., developing data products specific for model use) but are also designed to be flexible and interoperable to take advantage of new software engineering techniques, standards (e.g., metadata standards) and tools and to support future Earth system data efforts (e.g., ocean acidification). CDIAC has provided data management

  14. Determination of neutron spectra formed by 40-MeV deuteron bombardment of a lithium target with multi-foil activation technique

    CERN Document Server

    Maekawa, F; Wada, M; Wilson, P P H; Ikeda, Y

    2000-01-01

    Neutron flux spectra at an irradiation field produced by a 40-MeV deuteron bombardment on a thick lithium-target at Forschungszentrum Karlsruhe, Germany, have been determined by the multi-foil activation technique. Twenty-seven dosimetry reactions having a wide energy range of threshold energies up to 38 MeV were employed as detectors for the neutron flux spectra extending to 55 MeV. The spectra were adjusted with the SAND-II code with the experimental reaction rates based on an iterative method. The adjusted spectra validated quantitatively the Monte Carlo deuteron-lithium (d-Li) neutron source model code (M sup C DeLi) which was used to calculate initial guess spectra and also has been used for IFMIF nuclear designs. Accuracy of the adjusted spectra was approx 10% that was suitable for successive integral tests of activation cross section data.

  15. Evaluation of the oral 13C-bicarbonate tracer technique for the estimation of CO2 production and energy expenditure in dogs during rest and physical activity

    DEFF Research Database (Denmark)

    Larsson, Caroline; Junghans, Peter; Tauson, Anne-Helene

    2010-01-01

    For feeding of working dogs during their daily life, illness, routine jobs or sporting activities, an accurate determination of their nutritional requirements is essential to ensure their optimal health and performance. To predict the appropriate guidelines about how to feed dogs, it appears...... essential to determine the energy expenditure (EE) in a reliable and feasible way. In the present experiment, the non-invasive oral ¹³C-bicarbonate tracer technique (o¹³CT), i.e. collection of breath samples after oral administration of NaH¹³CO3, was used for the estimation of CO2 production and EE in dogs...... in dogs at different activity levels under near natural conditions....

  16. Atmospheric depositions of rare earth elements in Albania studied by the moss biomonitoring technique, neutron activation analysis and GIS technology

    International Nuclear Information System (INIS)

    Allajbeu, Sh.; Lazo, P.; Yushin, N.S.; Frontasyeva, M.V.; Qarri, F.; Duliu, O.G.

    2015-01-01

    Rare earth elements (REE) are conservative elements, scarcely derived from anthropogenic sources. The mobilization of REE in the environment requires their monitoring in environmental matrices, where they are mainly present at trace levels. The results on determination of the content of 11 elements by epithermal neutron activation analysis (ENAA) at the IBR-2 reactor in Dubna in carpet-forming moss species Hypnum cupressiforme collected from 44 sampling sites over the whole Albanian territory are presented and discussed. The paper is focused on Sc and lanthanides, as well as Fe and Th, the last ones showing correlations with the investigated REE. With the exception of Fe, all other elements were never determined in the air deposition of Albania. The STATISTICA TM 10 software was used for data analysis. The median values for the content of elements under investigation were compared to those in Bulgaria, Macedonia, Romania and Serbia, as well as Norway selected as a pristine area. Therefore, it was shown that the accumulation of REE in mosses is associated with the wind blown metal-enriched soils that are pointed out as the main emitting factor. [ru

  17. Demonstration of a multiscale modeling technique: prediction of the stress–strain response of light activated shape memory polymers

    International Nuclear Information System (INIS)

    Beblo, Richard V; Weiland, Lisa Mauck

    2010-01-01

    Presented is a multiscale modeling method applied to light activated shape memory polymers (LASMPs). LASMPs are a new class of shape memory polymer (SMPs) being developed for adaptive structures applications where a thermal stimulus is undesirable. LASMP developmental emphasis is placed on optical manipulation of Young's modulus. A multiscale modeling approach is employed to anticipate the soft and hard state moduli solely on the basis of a proposed molecular formulation. Employing such a model shows promise for expediting down-selection of favorable formulations for synthesis and testing, and subsequently accelerating LASMP development. An empirical adaptation of the model is also presented which has applications in system design once a formulation has been identified. The approach employs rotational isomeric state theory to build a molecular scale model of the polymer chain yielding a list of distances between the predicted crosslink locations, or r-values. The r-values are then fitted with Johnson probability density functions and used with Boltzmann statistical mechanics to predict stress as a function of the strain of the phantom polymer network. Empirical adaptation for design adds junction constraint theory to the modeling process. Junction constraint theory includes the effects of neighboring chain interactions. Empirical fitting results in numerically accurate Young's modulus predictions. The system is modular in nature and thus lends itself well to being adapted to other polymer systems and development applications

  18. Atmospheric deposition of rare earth elements in Albania studied by the moss biomonitoring technique, neutron activation analysis and GIS technology.

    Science.gov (United States)

    Allajbeu, Sh; Yushin, N S; Qarri, F; Duliu, O G; Lazo, P; Frontasyeva, M V

    2016-07-01

    Rare earth elements (REEs) are typically conservative elements that are scarcely derived from anthropogenic sources. The mobilization of REEs in the environment requires the monitoring of these elements in environmental matrices, in which they are present at trace level. The determination of 11 REEs in carpet-forming moss species (Hypnum cupressiforme) collected from 44 sampling sites over the whole territory of the country were done by using epithermal neutron activation analysis (ENAA) at IBR-2 fast pulsed reactor in Dubna. This paper is focused on REEs (lanthanides) and Sc. Fe as typical consistent element and Th that appeared good correlations between the elements of lanthanides are included in this paper. Th, Sc, and REEs were never previously determined in the air deposition of Albania. Descriptive statistics were used for data treatment using MINITAB 17 software package. The median values of the elements under investigation were compared with those of the neighboring countries such as Bulgaria, Macedonia, Romania, and Serbia, as well as Norway which is selected as a clean area. Geographical distribution maps of the elements over the sampled territory were constructed using geographic information system (GIS) technology. Geochemical behavior of REEs in moss samples has been studied by using the ternary diagram of Sc-La-Th, Spider diagrams and multivariate analysis. It was revealed that the accumulation of REEs in current mosses is associated with the wind-blowing metal-enriched soils that is pointed out as the main emitting factor of the elements under investigation.

  19. Modelling and optimization of Mn/activate carbon nanocatalysts for NO reduction: comparison of RSM and ANN techniques.

    Science.gov (United States)

    Mousavi, Seyed Mahdi; Niaei, Aligholi; Salari, Dariush; Panahi, Parvaneh Nakhostin; Samandari, Masoud

    2013-01-01

    A response surface methodology (RSM) involving a central composite design was applied to the modelling and optimization of a preparation of Mn/active carbon nanocatalysts in NH3-SCR of NO at 250 degrees C and the results were compared with the artificial neural network (ANN) predicted values. The catalyst preparation parameters, including metal loading (wt%), calcination temperature and pre-oxidization degree (v/v% HNO3) were selected as influence factors on catalyst efficiency. In the RSM model, the predicted values of NO conversion were found to be in good agreement with the experimental values. Pareto graphic analysis showed that all the chosen parameters and some of the interactions were effective on response. The optimization results showed that maximum NO conversion was achieved at the optimum conditions: 10.2 v/v% HNO3, 6.1 wt% Mn loading and calcination at 480 degrees C. The ANN model was developed by a feed-forward back propagation network with the topology 3, 8 and 1 and a Levenberg-Marquardt training algorithm. The mean square error for the ANN and RSM models were 0.339 and 1.176, respectively, and the R2 values were 0.991 and 0.972, respectively, indicating the superiority of ANN in capturing the nonlinear behaviour of the system and being accurate in estimating the values of the NO conversion.

  20. Review of techniques to prevent introduction of zebra mussels (Dreissena polymorpha) during native mussel (Unionoidea) conservation activities

    Science.gov (United States)

    Cope, W.G.; Newton, T.J.; Gatenby, C.M.

    2003-01-01

    Because of the declines in diversity and abundance of native freshwater mussels (superfamily Unionoidea), and the potential decimation of populations of native mussels resulting from the rapid spread of the exotic zebra mussel Dreissena polymorpha, management options to eliminate or reduce the threat of the zebra mussel are needed. Relocating native mussels to refugia (artificial and natural) has been proposed to mitigate the threat of zebra mussels to native species. Relocation of native mussels to refugia such as fish hatchery facilities or natural habitats within their historic range. Which are unlikely to be infested by zebra mussels, necessitates that protocols be developed to prevent the inadvertent introduction of zebra mussels. Several recent studies have developed Such protocols, and have assessed their effectiveness on the health and survival of native mussels during subsequent relocation to various refugia. The purpose of this project is to synthesize and evaluate the current protocols and to develop a set of procedures that resource managers and researchers should consider before conducting conservation activities in zebra mussel infested waters. We found that the existing protocols have many common points of concern, such as facility modification and suitability, zebra mussel risk assessment and management procedures, and health and disease management procedures. These conservation protocols may have broad applicability to other situations and locations. A summary and evaluation of the information in these main areas, along with recommended guidelines, are presented in this article.

  1. BIOMECHANICS AND HISTOLOGICAL ANALYSIS IN RABBIT FLEXOR TENDONS REPAIRED USING THREE SUTURE TECHNIQUES (FOUR AND SIX STRANDS) WITH EARLY ACTIVE MOBILIZATION.

    Science.gov (United States)

    Severo, Antônio Lourenço; Arenhart, Rodrigo; Silveira, Daniela; Ávila, Aluísio Otávio Vargas; Berral, Francisco José; Lemos, Marcelo Barreto; Piluski, Paulo César Faiad; Lech, Osvandré Luís Canfield; Fukushima, Walter Yoshinori

    2012-01-01

    Analyzing suture time, biomechanics (deformity between the stumps) and the histology of three groups of tendinous surgical repair: Brazil-2 (4-strands) which the end knot (core) is located outside the tendon, Indiana (4-strands) and Tsai (6-strands) with sutures technique which the end knot (core) is inner of the tendon, associated with early active mobilization. The right calcaneal tendons (plantar flexor of the hind paw) of 36 rabbits of the New Zealand breed (Oryctolagus cuniculus) were used in the analysis. This sample presents similar size to human flexor tendon that has approximately 4.5 mm (varying from 2mm). The selected sample showed the same mass (2.5 to 3kg) and were male or female adults (from 8 ½ months). For the flexor tendons of the hind paws, sterile and driven techniques were used in accordance to the Committee on Animal Research and Ethics (CETEA) of the University of the State of Santa Catarina (UDESC), municipality of Lages, in Brazil (protocol # 1.33.09). In the biomechanical analysis (deformity) carried out between tendinous stumps, there was no statistically significant difference (p>0.01). There was no statistical difference in relation to surgical time in all three suture techniques with a mean of 6.0 minutes for Tsai (6- strands), 5.7 minutes for Indiana (4-strands) and 5.6 minutes for Brazil (4-strands) (p>0.01). With the early active mobility, there was qualitative and quantitative evidence of thickening of collagen in 38.9% on the 15(th) day and in 66.7% on the 30(th) day, making the biological tissue stronger and more resistant (p=0.095). This study demonstrated that there was no histological difference between the results achieved with an inside or outside end knot with respect to the repaired tendon and the number of strands did not affect healing, vascularization or sliding of the tendon in the osteofibrous tunnel, which are associated with early active mobility, with the repair techniques applied.

  2. Toxicity assessment of pharmaceutical compounds on mixed culture from activated sludge using respirometric technique: The role of microbial community structure.

    Science.gov (United States)

    Vasiliadou, I A; Molina, R; Martinez, F; Melero, J A; Stathopoulou, P M; Tsiamis, G

    2018-02-26

    Micropollutants of emerging concern such as pharmaceuticals can significantly affect the performance of secondary biological processes in wastewater treatment plants. The present study is aimed to evaluate the toxicity and inhibition of three pharmaceutical compounds (caffeine, sulfamethoxazole and carbamazepine) on two cultures of microbial consortia enriched from wastewater aerobic activated sludge. One of them was acclimated to pharmaceuticals and the other was non-acclimated as control bioassay. The toxic and inhibitory effects on these cultures were assessed by respirometric tests through the oxygen uptake rate as an indicator of their capacity to degrade a readily available carbon source. Higher values of toxicity and inhibition of pharmaceutical compounds were observed for the control culture as compared to the acclimated one. Sulfamethoxazole and carbamazepine exhibited higher toxicity and inhibition effects than caffeine in both acclimated and control cultures. The microbial diversity of the two cultures was also studied. The composition of microbial community of acclimated and control cultures, was determined by targeting the 16S ribosomal RNA gene. It was observed that Proteobacteria was the most abundant phylum, with Gammaproteobacteria dominating both cultures. Control culture was dominated by Gammaproteobacteria and mostly by the genera Pseudomonas and Sodalis, which belong to common families present in wastewater. Results suggested that the acclimated culture to the three pharmaceuticals was mostly comprised of the extremely multiresistant genera Escherichia-Shigella (38%) of Gammaproteobacteria, resulting to higher resistance as compared to the control culture (Escherichia-Shigella, 7%). Finally, the microbial structure of the microorganisms present in a real bioreactor, which was initially seeded with the acclimated culture and fed in a continuous mode with the selected pharmaceuticals, was also analyzed. The continuous loading of pharmaceuticals

  3. A downscaling technique to simulate changes in western North Pacific tropical cyclone activity between two types of El Niño events

    Science.gov (United States)

    Zhao, Haikun

    2016-02-01

    Changes in tropical cyclone (TC) activity over the western North Pacific (WNP) basin between the Modoki and canonical El Niño years have been simulated and examined in this study based on a downscaling technique. The downscaling technique is used for generating synthetic TCs based on TC formation, TC track, and TC intensity models. Results suggest that the downscaling technique can well simulate the spatial distribution of TC activity during the two types of El Niño years and their differences. It is found that the observed changes in TC tracks during the two types of El Niño years are mainly due to the combined effects of changes in TC formation locations and large-scale steering flows. Further examinations have shown that changes in large-scale steering flows play a more important role than changes in TC formation locations. These results are in accordance with the cyclonic circulation anomaly found during the Modoki El Niño years compared to that during the canonical El Niño years. Numerical simulations further suggest that changes in TC tracks between the two types of El Niño years appear to be the most important factor affecting the TC intensity change. Compared to that during the Modoki El Niño years, TC formation is enhanced in the south quadrant of the WNP basin and more TCs take a northwestward track during the canonical El Niño years, leading to a longer TC lifespan and greater TC intensity.

  4. Dismantling techniques

    International Nuclear Information System (INIS)

    Wiese, E.

    1998-01-01

    Most of the dismantling techniques used in a Decontamination and Dismantlement (D and D) project are taken from conventional demolition practices. Some modifications to the techniques are made to limit exposure to the workers or to lessen the spread of contamination to the work area. When working on a D and D project, it is best to keep the dismantling techniques and tools as simple as possible. The workers will be more efficient and safer using techniques that are familiar to them. Prior experience with the technique or use of mock-ups is the best way to keep workers safe and to keep the project on schedule

  5. Coagulation effect on the activity size distributions of long lived radon progeny aerosols and its application to atmospheric residence time estimation techniques.

    Science.gov (United States)

    Anand, S; Mayya, Y S

    2015-03-01

    The long lived naturally occurring radon progeny species in the atmosphere, namely (210)Pb, (210)Bi and (210)Po, have been used as important tracers for understanding the atmospheric mixing processes and estimating aerosol residence times. Several observations in the past have shown that the activity size distribution of these species peaks at larger particle sizes as compared to the short lived radon progeny species - an effect that has been attributed to the process of coagulation of the background aerosols to which they are attached. To address this issue, a mathematical equation is derived for the activity-size distribution of tracer species by formulating a generalized distribution function for the number of tracer atoms present in coagulating background particles in the presence of radioactive decay and removal. A set of these equations is numerically solved for the progeny chain using Fuchs coagulation kernel combined with a realistic steady-state aerosol size spectrum that includes nucleation, accumulation and coarse mode components. The important findings are: (i) larger shifts in the modal sizes of (210)Pb and (210)Po at higher aerosol concentrations such as that found in certain Asian urban regions (ii) enrichment of tracer specific activity on particles as compared to that predicted by pure attachment laws (iii) sharp decline of daughter-to-parent activity ratios for decreasing particle sizes. The implication of the results to size-fractionated residence time estimation techniques is highlighted. A coagulation corrected graphical approach is presented for estimating the residence times from the size-segregated activity ratios of (210)Bi and (210)Po with respect to (210)Pb. The discrepancy between the residence times predicted by conventional formula and the coagulation corrected approach for specified activity ratios increases at higher atmospheric aerosol number concentrations (>10(10) #/m(3)) for smaller sizes (<1 μm). The results are further

  6. Extraction of Natural Antioxidants from the Thelephora ganbajun Mushroom by an Ultrasound-Assisted Extraction Technique and Evaluation of Antiproliferative Activity of the Extract against Human Cancer Cells

    Directory of Open Access Journals (Sweden)

    Dong-Ping Xu

    2016-10-01

    Full Text Available The Thelephora ganbajun mushroom has been found to be a potential rich source of natural antioxidants. In this study, an ultrasound-assisted extraction (UAE technique together with GRAS (generally recognized as safe solvents (ethanol and water was used to maximize the extraction of antioxidants from Thelephora ganbajun. Five extraction parameters (ethanol concentration, solvent to solid ratio, extraction time, temperature and ultrasound power were investigated by single-factor experiments, and then a central composite rotatable design was employed to study interaction of three key extraction parameters. The optimum conditions were as follows: 57.38% ethanol, 70.15 mL/g solvent to solid ratio, 10.58 min extraction time, 40 °C extraction temperature and 500 W ultrasound power. Under the optimum conditions, the antioxidant activity obtained was 346.98 ± 12.19 µmol Trolox/g DW, in accordance with the predicted value of 344.67 µmol Trolox/g DW. Comparison of UAE with conventional maceration and Soxhlet extraction, the UAE method showed stronger extract efficiency in a shorter extraction time. These results showed that UAE was an effective technique to extract antioxidants from Thelephora ganbajun. Furthermore, the extracts obtained under the optimized conditions exhibited antiproliferative activities toward human lung (A549, breast (MCF-7, liver (HepG2 and colon (HT-29 cancer cells, especially for liver and lung cancer cells. In addition, rutin, 2-hydrocinnamic acid and epicatechin were identified in the extract, which might contribute to antioxidant and antiproliferative activities.

  7. Extraction of Natural Antioxidants from the Thelephora ganbajun Mushroom by an Ultrasound-Assisted Extraction Technique and Evaluation of Antiproliferative Activity of the Extract against Human Cancer Cells

    Science.gov (United States)

    Xu, Dong-Ping; Zheng, Jie; Zhou, Yue; Li, Ya; Li, Sha; Li, Hua-Bin

    2016-01-01

    The Thelephora ganbajun mushroom has been found to be a potential rich source of natural antioxidants. In this study, an ultrasound-assisted extraction (UAE) technique together with GRAS (generally recognized as safe) solvents (ethanol and water) was used to maximize the extraction of antioxidants from Thelephora ganbajun. Five extraction parameters (ethanol concentration, solvent to solid ratio, extraction time, temperature and ultrasound power) were investigated by single-factor experiments, and then a central composite rotatable design was employed to study interaction of three key extraction parameters. The optimum conditions were as follows: 57.38% ethanol, 70.15 mL/g solvent to solid ratio, 10.58 min extraction time, 40 °C extraction temperature and 500 W ultrasound power. Under the optimum conditions, the antioxidant activity obtained was 346.98 ± 12.19 µmol Trolox/g DW, in accordance with the predicted value of 344.67 µmol Trolox/g DW. Comparison of UAE with conventional maceration and Soxhlet extraction, the UAE method showed stronger extract efficiency in a shorter extraction time. These results showed that UAE was an effective technique to extract antioxidants from Thelephora ganbajun. Furthermore, the extracts obtained under the optimized conditions exhibited antiproliferative activities toward human lung (A549), breast (MCF-7), liver (HepG2) and colon (HT-29) cancer cells, especially for liver and lung cancer cells. In addition, rutin, 2-hydrocinnamic acid and epicatechin were identified in the extract, which might contribute to antioxidant and antiproliferative activities. PMID:27706082

  8. Immune complex detection and complement activity in rheumatoid arthritis: a comparative study of a radioimmunoassay using monoclonal rheumatoid factor, gel diffusion techniques and C4 activity

    International Nuclear Information System (INIS)

    Halla, J.T.; Volanakis, J.E.; Hardin, J.G.; Schrohenloher, R.E.

    1978-01-01

    Paired sera and synovial fluids from 49 patients with rheumatoid arthritis and 25 with other forms of arthritis were tested for immune complexes by a radioimmunoassay using monoclonal rheumatoid factor and gel diffusion procedures with monoclonal rheumatoid factor and Clq. Synovial fluid hemolytic C4 and C4 adjusted for IgG concentration were determined in both groups of patients. Immune complexes were detected at similar high frequencies in the rheumatoid synovial fluids by precipitin formation with monoclonal rheumatoid factor (68%) and Clq (71%). In contrast, immune complexes in rheumatoid sere were detected in low frequency by precipitin reactions with monoclonal rheumatoid factor (10%) and Clq (0%). Using the monoclonal rheumatoid factor radioimmunoassay, thirty-one (63%) synovial fluids exceeded the mean non-RA binding activity by one standard deviation. Synovial fluid C4 adjusted for IgG as well as IgG alone distinguished between the two groups of patients whereas the C4 did not. The C4/IgG value showed a strong negative correlation with the monoclonal rheumatoid factor radioimmunoassay and Clq precipitin formation. (author)

  9. Efficacy of needle irrigation, EndoActivator, and photon-initiated photoacoustic streaming technique on removal of double and triple antibiotic pastes.

    Science.gov (United States)

    Arslan, Hakan; Akcay, Merve; Capar, Ismail Davut; Ertas, Hüseyin; Ok, Evren; Uysal, Banu

    2014-09-01

    Photon-induced photoacoustic streaming (PIPS) is a novel technique used for the removal of material on root canal walls, such as bacteria and the smear layer. This study evaluated the efficacy of needle irrigation, the EndoActivator System (Dentsply Tulsa Dental Specialties, Tulsa, OK), and PIPS on the removal of antibiotic pastes from an artificial groove created in a root canal. Root canal preparation was performed up to size #40 on 84 extracted single-rooted teeth using ProTaper rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland). The specimens were then split longitudinally, and 2 standardized grooves were prepared in the coronal and apical part of each segment. Double (DAP) and triple antibiotic pastes (TAP) were placed in the grooves for 4 weeks, and the root halves were reassembled. Needle irrigation, the EndoActivator System, and PIPS were used for the removal of DAP and TAP. The root segments were disassembled, and the amount of remaining antibiotic pastes was evaluated under a stereomicroscope at 20× magnification using a 4-grade scoring system. The data were evaluated statistically using Mann-Whitney U tests with a 95% confidence level (P = .05). PIPS removed significantly more antibiotic pastes than the EndoActivator and needle irrigation (P irrigation in removing antibiotic pastes (P .05). PIPS was more effective in removing both DAP and TAP from artificial grooves in root canals than the EndoActivator System and needle irrigation. The EndoActivator was also more effective than needle irrigation. It is difficult to completely remove antibiotic pastes from root canals. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  10. What Hispanic parents do to encourage and discourage 3-5 year old children to be active: a qualitative study using nominal group technique.

    Science.gov (United States)

    O'Connor, Teresia M; Cerin, Ester; Hughes, Sheryl O; Robles, Jessica; Thompson, Deborah; Baranowski, Tom; Lee, Rebecca E; Nicklas, Theresa; Shewchuk, Richard M

    2013-08-06

    Hispanic preschoolers are less active than their non-Hispanic peers. As part of a feasibility study to assess environmental and parenting influences on preschooler physical activity (PA) (Niños Activos), the aim of this study was to identify what parents do to encourage or discourage PA among Hispanic 3-5 year old children to inform the development of a new PA parenting practice instrument and future interventions to increase PA among Hispanic youth. Nominal Group Technique (NGT), a structured multi-step group procedure, was used to elicit and prioritize responses from 10 groups of Hispanic parents regarding what parents do to encourage (5 groups) or discourage (5 groups) preschool aged children to be active. Five groups consisted of parents with low education (less than high school) and 5 with high education (high school or greater) distributed between the two NGT questions. Ten NGT groups (n = 74, range 4-11/group) generated 20-46 and 42-69 responses/group for practices that encourage or discourage PA respectively. Eight to 18 responses/group were elected as the most likely to encourage or discourage PA. Parental engagement in child activities, modeling PA, and feeding the child well were identified as parenting practices that encourage child PA. Allowing TV and videogame use, psychological control, physical or emotional abuse, and lack of parental engagement emerged as parenting practices that discourage children from being active. There were few differences in the pattern of responses by education level. Parents identified ways they encourage and discourage 3-5 year-olds from PA, suggesting both are important targets for interventions. These will inform the development of a new PA parenting practice scale to be further evaluated. Further research should explore the role parents play in discouraging child PA, especially in using psychological control or submitting children to abuse, which were new findings in this study.

  11. Pulse holographic measurement techniques

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Baik, Seong Hoon; Hong, Seok Kyung; Kim, Jeong Moog; Kim, Duk Hyun

    1992-01-01

    With the development of laser, remote inspection techniques using laser have been growing on. The inspection and measurement techniques by pulse holography are well-established technique for precise measurement, and widely used in various fields of industry now. In nuclear industry, this technology is practically used because holographic inspection is remote, noncontact, and precise measurement technique. In relation to remote inspection technology in nuclear industry, state-of-the art of pulse HNDT (Holographic non-destructive testing) and holographic measurement techniques are examined. First of all, the fundamental principles as well as practical problems for applications are briefly described. The fields of pulse holography have been divided into the HNDT, flow visualization and distribution study, and other application techniques. Additionally holographic particle study, bubble chamber holography, and applications to other visualization techniques are described. Lastly, the current status for the researches and applications of pulse holography to nuclear industry which are carried out actively in Europe and USA, is described. (Author)

  12. Airway Clearance Techniques (ACTs)

    Medline Plus

    Full Text Available ... a Family Parenting as an Adult With CF Treatments & Therapies People with cystic fibrosis are living longer ... to specialized CF care and a range of treatment options. Airway Clearance Active Cycle of Breathing Technique ...

  13. Electromagnetic modelling, inversion and data-processing techniques for GPR: ongoing activities in Working Group 3 of COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Giannopoulos, Antonis; van der Kruk, Jan

    2015-04-01

    This work aims at presenting the ongoing research activities carried out in Working Group 3 (WG3) 'EM methods for near-field scattering problems by buried structures; data processing techniques' of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' (www.GPRadar.eu). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. WG3 is structured in four Projects. Project 3.1 deals with 'Electromagnetic modelling for GPR applications.' Project 3.2 is concerned with 'Inversion and imaging techniques for GPR applications.' The topic of Project 3.3 is the 'Development of intrinsic models for describing near-field antenna effects, including antenna-medium coupling, for improved radar data processing using full-wave inversion.' Project 3.4 focuses on 'Advanced GPR data-processing algorithms.' Electromagnetic modeling tools that are being developed and improved include the Finite-Difference Time-Domain (FDTD) technique and the spectral domain Cylindrical-Wave Approach (CWA). One of the well-known freeware and versatile FDTD simulators is GprMax that enables an improved realistic representation of the soil/material hosting the sought structures and of the GPR antennas. Here, input/output tools are being developed to ease the definition of scenarios and the visualisation of numerical results. The CWA expresses the field scattered by subsurface two-dimensional targets with arbitrary cross-section as a sum of cylindrical waves. In this way, the interaction is taken into account of multiple scattered fields within the medium hosting the sought targets. Recently, the method has been extended to deal with through-the-wall scenarios. One of the

  14. Application of neutron activation techniques and x-ray energy dispersion spectrometry, in analysis of metallic traces adsorbed by chelex-100 resin

    International Nuclear Information System (INIS)

    Fernandes, Jair C.; Amaral, Angela M.; Magalhaes, Jesus C.; Pereira, Jose S.J.; Silva, Juliana B. da; Auler, Lucia M.L.A.

    2000-01-01

    In this work, the authors have investigated optimal conditions of adsorption for several ion metallic groups (cations of heavy metals and transition metals, oxyanions metallics and metalloids and cations of rare earths), as traces (ppb), withdrawn and in mixture of groups, by chelex-100 resin. The experiments have been developed by bath techniques in ammonium acetate tamponade solution 40 mM pH 5,52 content 0,5 g of chelex-100 resin. After magnetic agitation for two hours, resins were dried and submitted to X-ray energy dispersion spectrometry, x-ray fluorescence spectrometry and neutron activation analysis. The results have demonstrated that chelex-100 resin adsorb quantitatively transition element groups and rare earth groups in two cases (withdrawn and simultaneously adsorption)

  15. The determination of gold in activated charcoal by use of a loose-powder technique and x-ray-fluorescence spectrometry

    International Nuclear Information System (INIS)

    Balaes, A.M.E.

    1984-01-01

    The method of analysis described is applicable to samples of activated charcoal with a gold concentration of 15g/t and higher. The use of a loose-powder technique minimizes the time taken for the preparation of samples. A platinum internal standard is used for the correction for matrix effects and for differences that could be caused by the packing of the loose charcoal into liquid-sample cups. The precision of the method ranges from a relative standard deviation of 0,085 to 0,016 for concentrations of gold from 67 to 3800g/t respectively. The agreement between the recommended values for a set of reference samples and the values obtained by the X-ray-fluorescence method is better than 3 per cent. The overall time required for the analysis of ten samples and standards is approximately 1 hour. A detailed laboratory method and a computer programme for the calculations are given as appendices

  16. Determination of the archaeological origin of ceramic fragments characterized by neutron activation analysis, by means of the application of multivariable statistical analysis techniques

    International Nuclear Information System (INIS)

    Almazan T, M. G.; Jimenez R, M.; Monroy G, F.; Tenorio, D.; Rodriguez G, N. L.

    2009-01-01

    The elementary composition of archaeological ceramic fragments obtained during the explorations in San Miguel Ixtapan, Mexico State, was determined by the neutron activation analysis technique. The samples irradiation was realized in the research reactor TRIGA Mark III with a neutrons flow of 1·10 13 n·cm -2 ·s -1 . The irradiation time was of 2 hours. Previous to the acquisition of the gamma rays spectrum the samples were allowed to decay from 12 to 14 days. The analyzed elements were: Nd, Ce, Lu, Eu, Yb, Pa(Th), Tb, La, Cr, Hf, Sc, Co, Fe, Cs, Rb. The statistical treatment of the data, consistent in the group analysis and the main components analysis allowed to identify three different origins of the archaeological ceramic, designated as: local, foreign and regional. (Author)

  17. Vitamin B 12 absorption: correction of intestinal retention by whole-body profile activity of vitamin B 12-58 cobalt and by double tracer technique

    International Nuclear Information System (INIS)

    Goncalves, M.R. Bencke; Gheldof, R.; Paternot, L. van Tricht; Delmotte, E.; Verschaeren, A.; Martin, P.; Verhas, M.; Universidade Federal, Rio de Janeiro, RJ

    1997-01-01

    Full text. Intestinal retention could give false negative results in determining the whole-body retention of vitamin B 12 absorption (WBC B12-58Co). After having validate the WBC B12-58Co, taking the Schilling test as reference, we have studied the feasibility to evaluate the intestinal contamination by measurement of the profile activity distribution of vitamin B12-58Co and by a double tracer technique (WBC B12-58Co/ WBC 51 Cr Cl3). Methodology: twenty five patients were studied for the setting up of the new methodology. For eleven of them the WBC B12-58 Co retention was measured at the 7th day after the oral administration of 37KBq of B12-58Co using a four detectors whole body counter. One week later, a Schilling test was performed after the oral absorption of 18,5 KBq B12-57Co. Results were expressed as %ID. In these patients, one single peak of hepatic activity was observed on the whole body profile and thus no further intestinal correction was needed. In order to evaluate the intestinal contribution, we made in nine other patients the profile of the whole body distribution of activity at 1 h, 1 week and two weeks after the oral administration of B12-58Co. For five other patients a double tracer technique was used for intestinal correction after the simultaneous oral administration of 37 KBq of B12-58Co and 1,85 MBq of 51 Cr Cl3. The B12-58Co absorption was evaluated after intestinal correction based on subtraction of the 51Cr Cl3 contribution after the formula: B12-58Co(%ID) = WBC B12-58Co - WBC 51 Cr Cl3/1 - WBC 51 Cr Cl3. Results: the correlation with the Schilling test was found excellent: r=0,94 (n=11). The normality for WBC retention (n=7) was define as 53,2 +-12,4% ID (SD). For nine patients studied at the 7th day, the presence of a double peak (hepatic and intestinal peaks) allowed the subtraction by exponential extrapolation; the correction range was 4,4% to 37,2%. With the exception of one observation there was no difference in the measure of vitamin

  18. Different Activation Techniques for the Study of Epithermal Spectra, Applied to Heavy Water Lattices of Varying Fuel-To-Moderator Ratio

    Energy Technology Data Exchange (ETDEWEB)

    Sokolowski, E.K.

    1966-06-15

    Spectral indices at the cell boundary have been studied as functions of lattice pitch in the reference core of the Swedish R0 reactor. Epithermal indices were determined by activation of In{sup 115}, employing three different techniques: the two-foil, the cadmium ratio and the sandwich foil methods. The latter of these has the advantage of being independent of assumptions about foil cross sections or spectral functions, and it gives a spectrum index that lends itself readily to comparisons with theoretical multigroup calculations. Alternatively the results can be expressed in terms of the Westcott parameters r and T{sub n} when this is justified by the spectral conditions. The agreement between the three methods investigated is generally good. Good agreement is also found with multigroup collision.

  19. Gamma irradiation of Tetrapleura tetraptera fruit as a post-harvest technique and its subsequent effect on some phytochemicals, free scavenging activity and physicochemical properties

    Science.gov (United States)

    Darfour, B.; Agbenyegah, S.; Ofosu, D. O.; Okyere, A. A.; Asare, I. K.

    2014-09-01

    Herbs, spices and medicinal plants have been cherished by many ancient cultures for their use in curing common ailments and promoting good health. The dry fruit of Tetrapleura tetraptera has a pleasant aroma and hence used as a spice for seasoning in many parts of Ghana. Contamination of the fruit can occur at any stage during harvesting, drying, processing, transportation and storage. T. tetraptera is prone to microbial contamination and insect infestation resulting in quality deterioration and economic loss. The study aimed at establishing the effect of gamma irradiation as a post-harvest processing technique on T. tetraptera fruit and the subsequent effect of the gamma irradiation on some phytochemicals, free radical scavenging activity and physicochemical properties. The T. tetraptera powder was packed in polythene bags and gamma irradiated with Cobalt 60 source at 5 kGy and 10 kGy at room temperature at a dose rate of 2 kGy/h. The total phenolic content, total flavonoid and DPPH free radical scavenging activity, pH, lactic acid, vitamin C, moisture, carbohydrate, protein and trace element content of the samples were analysed. The antioxidant potential of the T. tetraptera extract was observed to be enhanced in the solvent used for the extraction after the irradiation but not the radiation dose used. Irradiation only had substantial impacts on carbohydrate and protein, Cu, Mg, and Mn. The T. tetraptera studied was safe for human consumption as far as trace metal levels are concerned. This study therefore suggest that gamma irradiation up to 10 kGy could be used as a post-harvest technique in T. tetraptera as a spice or herb.

  20. Preparation and electrocatalytic oxidation properties of a nickel pentacyanonitrosylferrate modified carbon composite electrode by two-step sol-gel technique: improvement of the catalytic activity

    International Nuclear Information System (INIS)

    Salimi, Abdollah; Abdi, Kamaleddin; Khayatiyan, Gholam-Reza

    2004-01-01

    The sol-gel technique was used to construct nickel pentacyanonitrosylferrate (NiPCNF) modified composite ceramic carbon electrodes (CCEs). This involves two steps: forming a CCE containing Ni powder and then immersing the electrode into a sodium pentacyanonitrosyl-ferrate solution (electroless deposition). The cyclic voltammograms of the resulting surface modified CCE under optimum conditions show a well-defined redox couple due to the [Ni II Fe III/II (CN) 5 NO] 0/-1 system. The electrochemical properties and stability of the modified electrode were investigated by cyclic voltammetry. The apparent electron transfer rate constant (k s ) and transfer coefficient (α) were determined by cyclic voltammetry being about 1.1 s -1 and 0.55, respectively. Sulfite has been chosen as a model to elucidate the electrocatalytic ability of NiPCNF-modified CCE prepared by one- or two-step sol-gel technique. The modified electrode showed excellent electrocatalytic activity toward the SO 3 2- electro oxidation in pH range 3-9 in comparison with CCE modified by homogeneous mixture of graphite powder, Ni(NO 3 ) 2 and Na 2 [Fe(CN) 5 NO] (one-step sol-gel technique). Sulfite was determined amperometrically at the surface of this modified electrode in pH 7. Under the optimized conditions the calibration curve is linear in the concentration range 2 μM to 2.0 mM. The detection limit (signal-to-noise is 3) and sensitivity are 0.5 μM and 13.5 nA/μM. The modified carbon ceramic electrode containing nickel pentacyanonitrosylferrate shows good repeatability, short response time, t (90%) 2 [Fe(CN) 5 NO] solution. The advantages of the SO 3 2- amperometrically detector based on the nickel pentacyanonitrosylferrate-doped CCE is high sensitivity, inherent stability at wide pH range, excellent catalytic activity and less expense and simplicity of preparation. This sensor can be used as amperometric detector in chromatographic instruments