WorldWideScience

Sample records for stable aptes bilayer-capped

  1. Proinsulin is stable at room temperature for 24 hours in EDTA: A clinical laboratory analysis (adAPT 3.

    Directory of Open Access Journals (Sweden)

    Jane Davidson

    Full Text Available Reference laboratories advise immediate separation and freezing of samples for the assay of proinsulin, which limit its practicability for smaller centres. Following the demonstration that insulin and C-peptide are stable in EDTA at room temperature for at least 24hours, we undertook simple stability studies to establish whether the same might apply to proinsulin.Venous blood samples were drawn from six adult women, some fasting, some not, aliquoted and assayed immediately and after storage at either 4°C or ambient temperature for periods from 2h to 24h.There was no significant variation or difference with storage time or storage condition in either individual or group analysis.Proinsulin appears to be stable at room temperature in EDTA for at least 24h. Immediate separation and storage on ice of samples for proinsulin assay is not necessary, which will simplify sample transport, particularly for multicentre trials.

  2. Apte, Dr Shree Kumar

    Indian Academy of Sciences (India)

    Elected: 2008 Section: General Biology. Apte, Dr Shree Kumar Ph.D. (Gujarat), FNA, FNASc, FNAAS. Date of birth: 18 October 1952. Specialization: Molecular Biology & Biotechnology, Physiology and Stress Biology of Bacteria & Plants Address: Emeritus Professor, Homi Bhabha National Institute, Anushakti Nagar, ...

  3. APT accelerator. Topical report

    International Nuclear Information System (INIS)

    Lawrence, G.; Rusthoi, D.

    1995-03-01

    The Accelerator Production of Tritium (APT) project, sponsored by Department of Energy Defense Programs (DOE/DP), involves the preconceptual design of an accelerator system to produce tritium for the nation's stockpile of nuclear weapons. Tritium is an isotope of hydrogen used in nuclear weapons, and must be replenished because of radioactive decay (its half-life is approximately 12 years). Because the annual production requirements for tritium has greatly decreased since the end of the Cold War, an alternative approach to reactors for tritium production, based on a linear accelerator, is now being seriously considered. The annual tritium requirement at the time this study was undertaken (1992-1993) was 3/8 that of the 1988 goal, usually stated as 3/8-Goal. Continued reduction in the number of weapons in the stockpile has led to a revised (lower) production requirement today (March, 1995). The production requirement needed to maintain the reduced stockpile, as stated in the recent Nuclear Posture Review (summer 1994) is approximately 3/16-Goal, half the previous level. The Nuclear Posture Review also requires that the production plant be designed to accomodate a production increase (surge) to 3/8-Goal capability within five years, to allow recovery from a possible extended outage of the tritium plant. A multi-laboratory team, collaborating with several industrial partners, has developed a preconceptual APT design for the 3/8-Goal, operating at 75% capacity. The team has presented APT as a promising alternative to the reactor concepts proposed for Complex-21. Given the requirements of a reduced weapons stockpile, APT offers both significant safety, environmental, and production-fexibility advantages in comparison with reactor systems, and the prospect of successful development in time to meet the US defense requirements of the 21st Century

  4. APT accelerator. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, G.; Rusthoi, D. [comp.] [ed.

    1995-03-01

    The Accelerator Production of Tritium (APT) project, sponsored by Department of Energy Defense Programs (DOE/DP), involves the preconceptual design of an accelerator system to produce tritium for the nation`s stockpile of nuclear weapons. Tritium is an isotope of hydrogen used in nuclear weapons, and must be replenished because of radioactive decay (its half-life is approximately 12 years). Because the annual production requirements for tritium has greatly decreased since the end of the Cold War, an alternative approach to reactors for tritium production, based on a linear accelerator, is now being seriously considered. The annual tritium requirement at the time this study was undertaken (1992-1993) was 3/8 that of the 1988 goal, usually stated as 3/8-Goal. Continued reduction in the number of weapons in the stockpile has led to a revised (lower) production requirement today (March, 1995). The production requirement needed to maintain the reduced stockpile, as stated in the recent Nuclear Posture Review (summer 1994) is approximately 3/16-Goal, half the previous level. The Nuclear Posture Review also requires that the production plant be designed to accomodate a production increase (surge) to 3/8-Goal capability within five years, to allow recovery from a possible extended outage of the tritium plant. A multi-laboratory team, collaborating with several industrial partners, has developed a preconceptual APT design for the 3/8-Goal, operating at 75% capacity. The team has presented APT as a promising alternative to the reactor concepts proposed for Complex-21. Given the requirements of a reduced weapons stockpile, APT offers both significant safety, environmental, and production-fexibility advantages in comparison with reactor systems, and the prospect of successful development in time to meet the US defense requirements of the 21st Century.

  5. Amtrak performance tracking (APT) system : methodology summary

    Science.gov (United States)

    2017-09-15

    The Volpe Center collaborated with Amtrak and the Federal Railroad Administration (FRA) to develop a cost accounting system named Amtrak Performance Tracking (APT) used by Amtrak to manage, allocate, and report its costs. APTs initial development ...

  6. Waste management plan for the APT

    International Nuclear Information System (INIS)

    England, J.L.

    1997-01-01

    This revision of the APT Waste Management Plan details the waste management requirements and issues specific to the APT plant for design considerations, construction, and operation. The APT Waste Management Plan is by its nature a living document and will be reviewed at least annually and revised as required

  7. APT LLRF control system functionality and architecture

    International Nuclear Information System (INIS)

    Regan, A.H.; Rohlev, A.S.; Ziomek, C.D.

    1996-01-01

    1% amplitude and l degree phase. The feedback control system requires a phase-stable RF reference subsystem signal to correctly phase each cavity. Also, instead of a single klystron RF source for individual accelerating cavities, multiple klystrons will drive a string of resonantly coupled cavities, based on input from a single LLRF feedback control system. To achieve maximum source efficiency, we will be employing single fast feedback controls around individual klystrons such that the gain and phase characteristics of each will be ''identical.'' In addition, resonance control is performed by providing a proper drive signal to structure cooling water valves in order to keep the cavity resonant during operation. To quickly respond to RF shutdowns, and hence rapid accelerating cavity cool- down, due to RF fault conditions, drive frequency agility in the main feedback control subsystem will also be incorporated. Top level block diagrams will be presented and described for each of the aforementioned subsystems as they will first be developed and demonstrated on the Low Energy Demonstrator Accelerator (LEDA) The low-level RF (LLRF) control system for the Accelerator Production of Tritium (APT) will perform various functions. Foremost is the feedback control of the accelerating fields within the cavity in order to maintain field stability within

  8. ESDAPT - APT PROGRAMMING EDITOR AND INTERPRETER

    Science.gov (United States)

    Premack, T.

    1994-01-01

    ESDAPT is a graphical programming environment for developing APT (Automatically Programmed Tool) programs for controlling numerically controlled machine tools. ESDAPT has a graphical user interface that provides the user with an APT syntax sensitive text editor and windows for displaying geometry and tool paths. APT geometry statement can also be created using menus and screen picks. ESDAPT interprets APT geometry statements and displays the results in its view windows. Tool paths are generated by batching the APT source to an APT processor (COSMIC P-APT recommended). The tool paths are then displayed in the view windows. Hardcopy output of the view windows is in color PostScript format. ESDAPT is written in C-language, yacc, lex, and XView for use on Sun4 series computers running SunOS. ESDAPT requires 4Mb of disk space, 7Mb of RAM, and MIT's X Window System, Version 11 Release 4, or OpenWindows version 3 for execution. Program documentation in PostScript format and an executable for OpenWindows version 3 are provided on the distribution media. The standard distribution medium for ESDAPT is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. This program was developed in 1992.

  9. APT and CEST Techniques for Clinical MRI

    NARCIS (Netherlands)

    Keupp, J.

    2011-01-01

    Chemical exchange saturation transfer (CEST) based in vivo detectionand quantification of endogenous macro-molecules (i.e., amide proton transfer, APT) or exogenous contrast agents is a highly sensitivemolecular MRI technique bearing a substantial clinical potential forexample in oncology or for

  10. Data of evolutionary structure change: 1APTE-2APRA [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1APTE-2APRA 1APT 2APR E A AASGVATNTPTANDEEYITPVTIGG--TTLNLNFDTGSA...VFDCST-NLPDFSVSISGYTATVPGSLINYGPSGDGSTCLGGIQSNSGIGFSIFGDIFLKSQYVVFDSDGPQLGFAPQA-VAE EEEEEEEEEEGGG EEEEEEEE --EEEEEEEE EEEE HHH...EEEEEE EEEEE 0 1APT E 1APTE YNPSA--

  11. The Assessment of Afterschool Program Practices Tool (APT): Findings from the APT Validation Study

    Science.gov (United States)

    Tracy, Allison; Surr, Wendy; Richer, Amanda

    2012-01-01

    The Assessment of Afterschool Program Practices Tool ("APT"), developed by the National Institute of Out-of-School Time (NIOST), is an observational instrument designed to measure the aspects of afterschool program quality that research suggests contribute to the 21st century skills, attitudes, and behaviors youth need to be successful…

  12. Conceptual Design of an APT Reusable Spaceplane

    Science.gov (United States)

    Corpino, S.; Viola, N.

    This paper concerns the conceptual design of an Aerial Propellant Transfer reusable spaceplane carried out during our PhD course under the supervision of prof. Chiesa. The new conceptual design methodology employed in order to develop the APT concept and the main characteristics of the spaceplane itself will be presented and discussed. The methodology for conceptual design has been worked out during the last three years. It was originally thought for atmospheric vehicle design but, thanks to its modular structure which makes it very flexible, it has been possible to convert it to space transportation systems design by adding and/or modifying a few modules. One of the major improvements has been for example the conception and development of the mission simulation and trajectory optimisation module. The methodology includes as main characteristics and innovations the latest techniques of geometric modelling and logistic, operational and cost aspects since the first stages of the project. Computer aided design techniques are used to obtain a better definition of the product at the end of the conceptual design phase and virtual reality concepts are employed to visualise three-dimensional installation and operational aspects, at least in part replacing full-scale mock- ups. The introduction of parametric three-dimensional CAD software integrated into the conceptual design methodology represents a great improvement because it allows to carry out different layouts and to assess them immediately. It is also possible to link the CAD system to a digital prototyping software which combines 3D visualisation and assembly analysis, useful to define the so-called Digital Mock-Up at Conceptual Level (DMUCL) which studies the integration between the on board systems, sized with simulation algorithms, and the airframe. DMUCL represents a very good means to integrate the conceptual design with a methodology turned towards dealing with Reliability, Availability, Maintainability and

  13. Design of the APT Target/Blanket

    Science.gov (United States)

    Cappiello, M. W.

    1998-04-01

    The Accelerator Production of Tritium Target/Blanket system is composed of a separated tungsten spallation target surrounded by a lead moderator, as well as attendant heat removal systems. The system is housed in a building located at the end of a 1.3 km long linear accelerator, which can produce a 100 mA proton beam up to 1700 MeV (170MW). The beam is expanded by a rastering system to a 0.19m x 190.m shape before passing through an Inconel window and impacting the heavy-water cooled tungsten target. Neutrons produced in the tungsten by the spallation process are further multiplied and moderated in a surrounding light-water cooled lead blanket. Neutron capture in tubes of Helium-3 gas inserted in the blanket produce tritium which is removed on a continual basis in an adjacent Tritium Separation Facility (TSF). The APT T/B is a robust design based on existing technology. Where possible, proven materials and component designs are used. To accommodate uncertainties in predicted lifetimes, the design is modularized to allow for a straightforward replacement of spent components. The thermal hydraulic design is well within allowable limits and due to the low temperature and pressure systems, offers additional safety and reliability benefits. The safety by design process has incorporated passive design features, redundancy, and defense in depth to provide adequate protection of both the worker and the public.

  14. APTS and rGO co-functionalized pyrenated fluorescent nanonets for representative vapor phase nitroaromatic explosive detection

    Science.gov (United States)

    Guo, Linjuan; Zu, Baiyi; Yang, Zheng; Cao, Hongyu; Zheng, Xuefang; Dou, Xincun

    2014-01-01

    For the first time, flexible PVP/pyrene/APTS/rGO fluorescent nanonets were designed and synthesized via a one-step electrospinning method to detect representative subsaturated nitroaromatic explosive vapor. The functional fluorescent nanonets, which were highly stable in air, showed an 81% quenching efficiency towards TNT vapor (~10 ppb) with an exposure time of 540 s at room temperature. The nice performance of the nanonets was ascribed to the synergistic effects induced by the specific adsorption properties of APTS, the fast charge transfer properties and the effective π-π interaction with pyrene and TNT of rGO. Compared to the analogues of TNT, the PVP/pyrene/APTS/rGO nanonets showed notable selectivity towards TNT and DNT vapors. The explored functionalization method opens up brand new insight into sensitive and selective detection of vapor phase nitroaromatic explosives.For the first time, flexible PVP/pyrene/APTS/rGO fluorescent nanonets were designed and synthesized via a one-step electrospinning method to detect representative subsaturated nitroaromatic explosive vapor. The functional fluorescent nanonets, which were highly stable in air, showed an 81% quenching efficiency towards TNT vapor (~10 ppb) with an exposure time of 540 s at room temperature. The nice performance of the nanonets was ascribed to the synergistic effects induced by the specific adsorption properties of APTS, the fast charge transfer properties and the effective π-π interaction with pyrene and TNT of rGO. Compared to the analogues of TNT, the PVP/pyrene/APTS/rGO nanonets showed notable selectivity towards TNT and DNT vapors. The explored functionalization method opens up brand new insight into sensitive and selective detection of vapor phase nitroaromatic explosives. Electronic supplementary information (ESI) available: Vapor pressure of TNT and its analogues, fluorescence quenching kinetics, fluorescence quenching efficiencies and additional SEM images. See DOI: 10.1039/c3nr04960d

  15. Assessment of Alternative RF Linac Structures for APT

    International Nuclear Information System (INIS)

    None

    1997-01-01

    The APT program has been examining both normal and superconducting variants of the APT linac for the past two years. A decision on which of the two will be the selected technology will depend upon several considerations including the results of ongoing feasibility experiments, the performance and overall attractiveness of each of the design concepts, and an assessment of the system-level features of both alternatives. The primary objective of the Assessment of Alternative RF Linac Structures for APT study reported herein was to assess and compare, at the system-level, the performance, capital and life cycle costs, reliability/availability/maintainability (RAM) and manufacturing schedules of APT RF linear accelerators based upon both superconducting and normal conducting technologies. A secondary objective was to perform trade studies to explore opportunities for system optimization, technology substitution and alternative growth pathways and to identify sensitivities to design uncertainties

  16. Confinement and Tritium Stripping Systems for APT Tritium Processing

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H. [Westinghouse Savannah River Company, AIKEN, SC (United States); Heung, L.K.

    1997-10-20

    This report identifies functions and requirements for the tritium process confinement and clean-up system (PCCS) and provides supporting technical information for the selection and design of tritium confinement, clean-up (stripping) and recovery technologies for new tritium processing facilities in the Accelerator for the Production of Tritium (APT). The results of a survey of tritium confinement and clean-up systems for large-scale tritium handling facilities and recommendations for the APT are also presented.

  17. Associated Particle Tagging (APT) in Magnetic Spectrometers

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, David V.; Baciak, James E.; Stave, Sean C.; Chichester, David; Dale, Daniel; Kim, Yujong; Harmon, Frank

    2012-10-16

    Summary In Brief The Associated Particle Tagging (APT) project, a collaboration of Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL) and the Idaho State University (ISU)/Idaho Accelerator Center (IAC), has completed an exploratory study to assess the role of magnetic spectrometers as the linchpin technology in next-generation tagged-neutron and tagged-photon active interrogation (AI). The computational study considered two principle concepts: (1) the application of a solenoidal alpha-particle spectrometer to a next-generation, large-emittance neutron generator for use in the associated particle imaging technique, and (2) the application of tagged photon beams to the detection of fissile material via active interrogation. In both cases, a magnetic spectrometer momentum-analyzes charged particles (in the neutron case, alpha particles accompanying neutron generation in the D-T reaction; in the tagged photon case, post-bremsstrahlung electrons) to define kinematic properties of the relevant neutral interrogation probe particle (i.e. neutron or photon). The main conclusions of the study can be briefly summarized as follows: Neutron generator: • For the solenoidal spectrometer concept, magnetic field strengths of order 1 Tesla or greater are required to keep the transverse size of the spectrometer smaller than 1 meter. The notional magnetic spectrometer design evaluated in this feasibility study uses a 5-T magnetic field and a borehole radius of 18 cm. • The design shows a potential for 4.5 Sr tagged neutron solid angle, a factor of 4.5 larger than achievable with current API neutron-generator designs. • The potential angular resolution for such a tagged neutron beam can be less than 0.5o for modest Si-detector position resolution (3 mm). Further improvement in angular resolution can be made by using Si-detectors with better position resolution. • The report documents several features of a notional generator design incorporating the

  18. Identifying APT Malware Domain Based on Mobile DNS Logging

    Directory of Open Access Journals (Sweden)

    Weina Niu

    2017-01-01

    Full Text Available Advanced Persistent Threat (APT is a serious threat against sensitive information. Current detection approaches are time-consuming since they detect APT attack by in-depth analysis of massive amounts of data after data breaches. Specifically, APT attackers make use of DNS to locate their command and control (C&C servers and victims’ machines. In this paper, we propose an efficient approach to detect APT malware C&C domain with high accuracy by analyzing DNS logs. We first extract 15 features from DNS logs of mobile devices. According to Alexa ranking and the VirusTotal’s judgement result, we give each domain a score. Then, we select the most normal domains by the score metric. Finally, we utilize our anomaly detection algorithm, called Global Abnormal Forest (GAF, to identify malware C&C domains. We conduct a performance analysis to demonstrate that our approach is more efficient than other existing works in terms of calculation efficiency and recognition accuracy. Compared with Local Outlier Factor (LOF, k-Nearest Neighbor (KNN, and Isolation Forest (iForest, our approach obtains more than 99% F-M and R for the detection of C&C domains. Our approach not only can reduce data volume that needs to be recorded and analyzed but also can be applicable to unsupervised learning.

  19. The aptness of knowledge related metaphors: a research agenda

    NARCIS (Netherlands)

    Dr. Daan Andriessen

    2010-01-01

    Metaphors are common phenomena intellectual capital and knowledge management theories and practice. An important question to ask is: what are the ‗best‘ metaphors we can use in our theorizing on intellectual capital and knowledge management? This paper addresses the question of the aptness of

  20. ASEAN plus Three (APT) As a Socializing Environment

    DEFF Research Database (Denmark)

    Zhang, Jiuan

    2012-01-01

    In East Asia, several formal and informal regional institutions have been established in the last several decades to promote regional integration. However, it is difficult to identify which is the dominant institution and determine how it is working. ASEAN Plus Three (APT), representing the first...

  1. Normal Operation (NO) of APT Blanket System and its Components Based on Initial Conceptual Design

    Energy Technology Data Exchange (ETDEWEB)

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports documenting accident scenario simulations for the Accelerator Production of Tritium (APT) blanket heat removal systems. The simulations were performed in support of the Preliminary Safety Analysis Report (PSAR) for the APT.

  2. APT/LEDA RFQ and support frame structural analysis

    International Nuclear Information System (INIS)

    Ellis, S.

    1997-01-01

    This report documents structural analysis of the Accelerator Production of Tritium Low Energy Demonstration Accelerator (APT/LEDA) Radio Frequency Quadrupole (RFQ) accelerator structure and its associated support frame. This work was conducted for the Department of Energy in support of the APT/LEDA. Structural analysis of the RFQ was performed to quantify stress levels and deflections due to both vacuum loading and gravity loading. This analysis also verified the proposed support scheme geometry and quantified interface loads. This analysis also determined the necessary stiffness and strength requirements of the RFQ support frame verifying the conceptual design geometry and allowing specification of individual frame elements. Complete structural analysis of the frame was completed subsequently. This report details structural analysis of the RFQ assembly with regard to gravity and vacuum loads only. Thermally induced stresses from the Radio Frequency (RF) surface resistance heating were not considered

  3. Investigation and Prediction of RF Window Performance in APT Accelerators

    International Nuclear Information System (INIS)

    Humphries, S. Jr.

    1997-01-01

    The work described in this report was performed between November 1996 and May 1997 in support of the APT (Accelerator Production of Tritium) Program at Los Alamos National Laboratory. The goal was to write and to test computer programs for charged particle orbits in RF fields. The well-documented programs were written in portable form and compiled for standard personal computers for easy distribution to LANL researchers. They will be used in several APT applications including the following. Minimization of multipactor effects in the moderate β superconducting linac cavities under design for the APT accelerator. Investigation of suppression techniques for electron multipactoring in high-power RF feedthroughs. Modeling of the response of electron detectors for the protection of high power RF vacuum windows. In the contract period two new codes, Trak-RF and WaveSim, were completed and several critical benchmark etests were carried out. Trak-RF numerically tracks charged particle orbits in combined electrostatic, magnetostatic and electromagnetic fields. WaveSim determines frequency-domain RF field solutions and provides a key input to Trak-RF. The two-dimensional programs handle planar or cylindrical geometries. They have several unique characteristics

  4. Expected dose rates from component activation in the APT accelerator

    International Nuclear Information System (INIS)

    Fikani, M.M.; Pitcher, E.J.

    1998-01-01

    At the heart of the APT is the concept of using accelerator-based technology to reliably produce tritium in sufficient quantity for maintaining the US strategic arsenal. The proposed accelerator for this project will provide a proton beam with an energy of 1700 MeV/particle, a current of 100 mA, and an on-target rectangular cross section of 19 x 190 cm. The spallation neutron source in the target chamber (configured in 13 ladders) produces a prodigious amount of neutrons and is enclosed on five sides by a number of regions (decouplers, production modules, and reflectors) that capture a portion of this flux for producing tritium. As with any large-scale accelerator, its complexity dictates a thorough understanding of the radiation environment it will produce. For an operational production level accelerator such as is needed for the APT, performance, reliability, and safety are of paramount importance. In order to meet production goals, downtime must be minimized. Inspection, maintenance, and/or replacement of accelerator components must be done in a timely fashion and on schedule. This requirement does not supersede safety considerations, however. In the design of the APT accelerator, several mechanisms for producing an ambient radiation field in the accelerator tunnel have been looked at. Analyses of these mechanisms and the radiation environments they produce then give us guidance in the design and may bound certain aspects in the operation of the accelerator. The authors discuss one such mechanism, that is, component activation from a continuous beam spill. Since this will be present at some level during all hours of normal beam operation, it is likely to be the dominant contributor to the dose rate that personnel working in the tunnel will receive. A continuous beam spill will activate all nearby accelerator components, as well as the concrete tunnel structure itself. Thus, in order for personnel to enter the accelerator tunnel as soon as possible after beam

  5. Micah 1, an apt introduction to power talks

    Directory of Open Access Journals (Sweden)

    W.J. Wessels

    1998-08-01

    Full Text Available Power and the abuse of it, is often an integral part of discussions in any society. The prophets of the Old Testament felt strongly about this issue and often spoke out against the abuse of power and the suffering caused by it. Micah particularly addresses this issue in chapters 2 and 3. He blames the leaders in society, who should look out for the ordinary people, that they in particular are guilty of this transgression. In chapter 1 Micah proclaims Yahweh as the sovereign power who they should take note off. On the very basis of Yahweh's sovereign power he then proclaims oracles of judgment on the people of Judah. Micah 1 seems to form an apt introduction to the talks of the abuse of power in the society of Judah.

  6. Potassium hydroxide: an alternative reagent to perform the modified apt test.

    Science.gov (United States)

    Chicaiza, Henry; Hellstrand, Karl; Lerer, Trudy; Smith, Sharon; Sylvester, Francisco

    2014-09-01

    We tested the performance of potassium hydroxide (KOH) in the modified Apt test under different experimental conditions using sodium hydroxide as a positive control. Like sodium hydroxide, KOH differentiated fresh fetal and adult blood stains on a cloth but not dried blood. KOH may be used to perform the Apt test at the bedside. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. APT mass spectrometry and SEM data for CdTe solar cells

    Directory of Open Access Journals (Sweden)

    Jonathan D. Poplawsky

    2016-06-01

    Full Text Available Atom probe tomography (APT data acquired from a CAMECA LEAP 4000 XHR for the CdS/CdTe interface for a non-CdCl2 treated CdTe solar cell as well as the mass spectrum of an APT data set including a GB in a CdCl2-treated CdTe solar cell are presented. Scanning electron microscopy (SEM data showing the evolution of sample preparation for APT and scanning transmission electron microscopy (STEM electron beam induced current (EBIC are also presented. These data show mass spectrometry peak decomposition of Cu and Te within an APT dataset, the CdS/CdTe interface of an untreated CdTe solar cell, preparation of APT needles from the CdS/CdTe interface in superstrate grown CdTe solar cells, and the preparation of a cross-sectional STEM EBIC sample.

  8. Design of 250-MW CW RF system for APT

    International Nuclear Information System (INIS)

    Rees, D.

    1997-01-01

    The design for the RF systems for the APT (Accelerator Production of Tritium) proton linac will be presented. The linac produces a continuous beam power of 130 MW at 1300 MeV with the installed capability to produce up to a 170 MW beam at 1700 MeV. The linac is comprised of a 350 MHz RFQ to 7 MeV followed in sequence by a 700 MHz coupled-cavity drift tube linac, coupled-cavity linac, and superconducting (SC) linac to 1700 MeV. At the 1700 MeV, 100 mA level the linac requires 213 MW of continuous-wave (CW) RF power. This power will be supplied by klystrons with a nominal output power of 1.0 MW. 237 kystrons are required with all but three of these klystrons operating at 700 MHz. The klystron count includes redundancy provisions that will be described which allow the RF systems to meet an operational availability in excess of 95 percent. The approach to achieve this redundancy will be presented for both the normal conducting (NC) and SC accelerators. Because of the large amount of CW RF power required for the APT linac, efficiency is very important to minimize operating cost. Operation and the RF system design, including in-progress advanced technology developments which improve efficiency, will be discussed. RF system performance will also be predicted. Because of the simultaneous pressures to increase RF system reliability, reduce tunnel envelope, and minimize RF system cost, the design of the RF vacuum windows has become an important issue. The power from a klystron will be divided into four equal parts to minimize the stress on the RF vacuum windows. Even with this reduction, the RF power level at the window is at the upper boundary of the power levels employed at other CW accelerator facilities. The design of a 350 MHz, coaxial vacuum window will be presented as well as test results and high power conditioning profiles. The transmission of 950 kW, CW, power through this window has been demonstrated with only minimal high power conditioning

  9. Development of the SCRF Power Coupler for the APT Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Schmierer, E.N.; Lujan, R.E.; Rusnak, B.; Smith, B.; Haynes, W.B.; Gautier, C.; Waynert, J.A.; Krawczyk, F.; Gioia, J.

    1999-03-01

    The team responsible for the design of the Accelerator Production of Tritium (APT) superconducting (SC) radio frequency (RF) power coupler has developed two 700-MHz, helium gas-cooled power couplers. One has a fixed inner conductor and the other has an adjustable inner conductor (gamma prototype and alpha prototype). The power couplers will be performance tested in the near future. This paper discusses the mechanical design and fabrication techniques employed in the development of each power coupler. This includes material selection, copper coating, assembly sequences, and metal joining procedures, as well as the engineering analyses performed to determine the dynamic response of the inner conductors due to environmental excitations. A bellows is used in both prototype inner conductors in the area near the ceramic RF window, to compensate for thermal expansion and mechanical tolerance build-up. In addition, a bellows is used near the tip of the inner conductor of the alpha prototype for running the power coupler after it is installed on the accelerator. Extensive analytical work has been performed to determine the static loads transmitted by the bellows due to thermally induced expansion on the inner conductor and on the RF window. This paper also discusses this analysis, as well as the mechanical analysis performed to determine the final geometric shape of the bellows. Finally, a discussion of the electromagnetic analysis used to optimize the performance of the power couplers is included.

  10. Optimization and characterization of biomolecule immobilization on silicon substrates using (3-aminopropyl)triethoxysilane (APTES) and glutaraldehyde linker

    Energy Technology Data Exchange (ETDEWEB)

    Gunda, Naga Siva Kumar [Department of Mechanical Engineering, University of Alberta, Edmonton, Canada T6G 2G8 (Canada); Singh, Minashree [Department of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Canada T6G 1C9 (Canada); Norman, Lana [Department of Chemical and Materials Engineering, University of Alberta, Edmonton, AB, Canada T6G 2V4 (Canada); Kaur, Kamaljit [Department of Pharmacy and Pharmaceutical Sciences, University of Alberta, Edmonton, Canada T6G 1C9 (Canada); Mitra, Sushanta K., E-mail: sushanta.mitra@ualberta.ca [Department of Mechanical Engineering, University of Alberta, Edmonton, Canada T6G 2G8 (Canada)

    2014-06-01

    In the present work, we developed and optimized a technique to produce a thin, stable silane layer on silicon substrate in a controlled environment using (3-aminopropyl)triethoxysilane (APTES). The effect of APTES concentration and silanization time on the formation of silane layer is studied using spectroscopic ellipsometry and Fourier transform infrared spectroscopy (FTIR). Biomolecules of interest are immobilized on optimized silane layer formed silicon substrates using glutaraldehyde linker. Surface analytical techniques such as ellipsometry, FTIR, contact angle measurement system, and atomic force microscopy are employed to characterize the bio-chemically modified silicon surfaces at each step of the biomolecule immobilization process. It is observed that a uniform, homogenous and highly dense layer of biomolecules are immobilized with optimized silane layer on the silicon substrate. The developed immobilization method is successfully implemented on different silicon substrates (flat and pillar). Also, different types of biomolecules such as anti-human IgG (rabbit monoclonal to human IgG), Listeria monocytogenes, myoglobin and dengue capture antibodies were successfully immobilized. Further, standard sandwich immunoassay (antibody–antigen–antibody) is employed on respective capture antibody coated silicon substrates. Fluorescence microscopy is used to detect the respective FITC tagged detection antibodies bound to the surface after immunoassay.

  11. Simulation of dynamic traffic loading based on accelerated pavement testing (APT)

    CSIR Research Space (South Africa)

    Steyn, WJvdM

    2004-03-01

    Full Text Available The objective of this paper is to introduce the latest Heavy Vehicle Simulator (HVS) technology as part of the South African Accelerated Pavement Testing (APT) efforts, its capabilities and expected impact on road pavement analysis....

  12. APT target/blanket design and thermal hydraulics

    International Nuclear Information System (INIS)

    Cappiello, M.; Pitcher, E.; Pasamehmetoglu, K.

    1999-01-01

    The Accelerator Production of Tritium (APT) Target/Blanket (T/B) system is comprised of an assembly of tritium producing modules supported by control, heat removal, shielding and retargeting systems. The T/B assembly produces tritium using a high-energy proton beam, a tungsten/lead spallation neutron source and 3 He gas as the tritium producing feedstock. For the nominal production mode, protons are accelerated to an energy of 1030 MeV at a current of 100 mA and are directed onto the T/B assembly. The protons are expanded using a raster/expansion system to illuminate a 0.19m by 1.9m beam spot on the front face of a centrally located tungsten neutron source. A surrounding lead blanket produces additional neutrons from scattered high-energy particles. The tungsten neutron source consists of nested, Inconel-718 clad tungsten cylinders assembled in horizontal Inconel-718 tubes. Each tube contains up to 6 cylinders with annular flow channel gaps of 0.102 cm. These horizontal tubes are manifolded into larger diameter vertical inlet and outlet pipes, which provide coolant. The horizontal and vertical tubes make up a structure similar to that of rungs on a ladder. The entire tungsten neutron source consists of 11 such ladders separated into two modules, one containing five ladders and the other six. Ladders are separated by a 0.3 m void region to increase nucleon leakage. The peak thermal-hydraulic conditions in the tungsten neutron source occur in the second ladder from the front. Because tungsten neutron source design has a significant number of parallel flow channels, the limiting thermal-hydraulic parameter is the onset of significant void (OSV) rather than critical heat flux (CHF). A blanket region surrounds the tungsten neutron source. The lateral blanket region is approximately 120 cm thick and 400 cm high. Blanket material consists of lead, 3 He gas, aluminum, and light-water coolant. The blanket region is subdivided into rows based on the local power density in

  13. Evaluation of medical isotope production with the accelerator production of tritium (APT) facility

    International Nuclear Information System (INIS)

    Benjamin, R.W.; Frey, G.D.; McLean, D.C., Jr; Spicer, K.M.; Davis, S.E.; Baron, S.; Frysinger, J.R.; Blanpied, G.; Adcock, D.

    1997-01-01

    The accelerator production of tritium (APT) facility, with its high beam current and high beam energy, would be an ideal supplier of radioisotopes for medical research, imaging, and therapy. By-product radioisotopes will be produced in the APT window and target cooling systems and in the tungsten target through spallation, neutron, and proton interactions. High intensity proton fluxes are potentially available at three different energies for the production of proton- rich radioisotopes. Isotope production targets can be inserted into the blanket for production of neutron-rich isotopes. Currently, the major production sources of radioisotopes are either aging or abroad, or both. The use of radionuclides in nuclear medicine is growing and changing, both in terms of the number of nuclear medicine procedures being performed and in the rapidly expanding range of procedures and radioisotopes used. A large and varied demand is forecast, and the APT would be an ideal facility to satisfy that demand

  14. Magnetic design and measurement of nonlinear multipole magnets for the APT beam expander system

    International Nuclear Information System (INIS)

    Barlow, D.B.; Shafer, R.E.; Martinez, R.P.; Walstrom, P.L.; Kahn, S.; Jain, A.; Wanderer, P.

    1997-01-01

    Two prototype nonlinear multipole magnets have been designed for use in the 800-MeV beam test of the APT beam-expansion concept at LANSCE. The iron-dominated magnets each consist of three independent coils, two for producing a predominantly octupole field with a tunable duodecapole component, and one for canceling the residual quadrupole field. Two such magnets, one for shaping each transverse plane, are required to produce a rectangular, uniform beam current density distribution with sharp edges on the APT target. This report will describe the magnetic design of these magnets, along with field measurements, and a comparison to the magnetic design

  15. Quantitative Characterization of NOE and APT Effects in the Human Brain at 7 Tesla

    Science.gov (United States)

    Liu, Dapeng; Zhou, Jinyuan; Xue, Rong; Zuo, Zhentao; An, Jing; Wang, Danny JJ

    2012-01-01

    Purpose This study aimed to quantitatively investigate two main magnetization transfer (MT) effects at low B1: the nuclear Overhauser enhancement (NOE) and amide proton transfer (APT) in the human brain at 7 Tesla. Methods The MT effects in the human brain were characterized using a four-pool proton model, which consisted of bulk water, macromolecules, an amide group of mobile proteins and peptides, and NOE-related protons resonating upfield. The pool sizes, exchange rates, and relaxation times of these proton pools were investigated quantitatively by fitting, and the net signals of APT and NOE were simulated based on the fitted parameters. Results The results showed that the four-pool model fitted the experimental data quite well, and the NOE effects in human brain at 7 T had a broad spectrum distribution. The NOE effects peaked at a B1 of ~ 1 - 1.4 μT and were significantly stronger in the white matter than in the gray matter, corresponding to a pool-size ratio of approximately 2:1. Since the APT effect was relatively small compared to the NOE effects, MT asymmetry analysis yielded an NOE-dominated contrast in the healthy human brain in this range of B1. Conclusion These findings are important to identify the source of NOE effects and to quantify APT effects in human brain at 7 T. PMID:23238951

  16. Medical Isotope Production With The Accelerator Production of Tritium (APT) Facility

    Energy Technology Data Exchange (ETDEWEB)

    Buckner, M.; Cappiello, M. [Westinghouse Savannah River Co., Aiken, SC (United States); Pitcher, E. [Los Alamos National Laboratory, Los Alamos, NM (United States); O`Brien, H. [O`Brien and Associates, Los Alamos, NM (United States)

    1998-08-01

    In order to meet US tritium needs to maintain the nuclear weapons deterrent, the Department of Energy (DOE) is pursuing a dual track program to provide a new tritium source. A record of decision is planned for late in 1998 to select either the Accelerator Production of Tritium (APT) or the Commercial Light Water Reactor (CLWR) as the technology for new tritium production in the next century. To support this decision, an APT Project was undertaken to develop an accelerator design capable of producing 3 kg of tritium per year by 2007 (START I requirements). The Los Alamos National Laboratory (LANL) was selected to lead this effort with Burns and Roe Enterprises, Inc. (BREI) / General Atomics (GA) as the prime contractor for design, construction, and commissioning of the facility. If chosen in the downselect, the facility will be built at the Savannah River Site (SRS) and operated by the SRS Maintenance and Operations (M{ampersand}O) contractor, the Westinghouse Savannah River Company (WSRC), with long-term technology support from LANL. These three organizations (LANL, BREI/GA, and WSRC) are working together under the direction of the APT National Project Office which reports directly to the DOE Office of Accelerator Production which has program authority and responsibility for the APT Project.

  17. Medical Isotope Production With The Accelerator Production of Tritium (APT) Facility

    International Nuclear Information System (INIS)

    Buckner, M.; Cappiello, M.; Pitcher, E.; O'Brien, H.

    1998-01-01

    In order to meet US tritium needs to maintain the nuclear weapons deterrent, the Department of Energy (DOE) is pursuing a dual track program to provide a new tritium source. A record of decision is planned for late in 1998 to select either the Accelerator Production of Tritium (APT) or the Commercial Light Water Reactor (CLWR) as the technology for new tritium production in the next century. To support this decision, an APT Project was undertaken to develop an accelerator design capable of producing 3 kg of tritium per year by 2007 (START I requirements). The Los Alamos National Laboratory (LANL) was selected to lead this effort with Burns and Roe Enterprises, Inc. (BREI) / General Atomics (GA) as the prime contractor for design, construction, and commissioning of the facility. If chosen in the downselect, the facility will be built at the Savannah River Site (SRS) and operated by the SRS Maintenance and Operations (M ampersand O) contractor, the Westinghouse Savannah River Company (WSRC), with long-term technology support from LANL. These three organizations (LANL, BREI/GA, and WSRC) are working together under the direction of the APT National Project Office which reports directly to the DOE Office of Accelerator Production which has program authority and responsibility for the APT Project

  18. Amide Proton Transfer (APT) MR imaging and Magnetization Transfer (MT) MR imaging of pediatric brain development

    International Nuclear Information System (INIS)

    Zhang, Hong; Kang, Huiying; Peng, Yun; Zhao, Xuna; Jiang, Shanshan; Zhang, Yi; Zhou, Jinyuan

    2016-01-01

    To quantify the brain maturation process during childhood using combined amide proton transfer (APT) and conventional magnetization transfer (MT) imaging at 3 Tesla. Eighty-two neurodevelopmentally normal children (44 males and 38 females; age range, 2-190 months) were imaged using an APT/MT imaging protocol with multiple saturation frequency offsets. The APT-weighted (APTW) and MT ratio (MTR) signals were quantitatively analyzed in multiple brain areas. Age-related changes in MTR and APTW were evaluated with a non-linear regression analysis. The APTW signals followed a decreasing exponential curve with age in all brain regions measured (R 2 = 0.7-0.8 for the corpus callosum, frontal and occipital white matter, and centrum semiovale). The most significant changes appeared within the first year. At maturation, larger decreases in APTW and lower APTW values were found in the white matter. On the contrary, the MTR signals followed an increasing exponential curve with age in the same brain regions measured, with the most significant changes appearing within the initial 2 years. There was an inverse correlation between the MTR and APTW signal intensities during brain maturation. Together with MT imaging, protein-based APT imaging can provide additional information in assessing brain myelination in the paediatric population. (orig.)

  19. Towards Understanding Tyre-Pavement Contact in APT Research on Flexible Pavements

    CSIR Research Space (South Africa)

    De Beer, Morris

    2016-09-01

    Full Text Available , but also in composition stiffness, tyre tread patters, etc. Together with selected tyre loading scenarios, tyre inflation pressure plays a very important role and which is often neglected during planning the APT research. The thinner the flexible surfacing...

  20. Amide Proton Transfer (APT) MR imaging and Magnetization Transfer (MT) MR imaging of pediatric brain development

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hong; Kang, Huiying; Peng, Yun [Beijing Children' s Hospital, Capital Medical University, Imaging Center, Department of Radiology, Beijing (China); Zhao, Xuna [Philips Healthcare, Beijing (China); Jiang, Shanshan; Zhang, Yi; Zhou, Jinyuan [Johns Hopkins University, Division of MR Research, Department of Radiology, Baltimore, MD (United States)

    2016-10-15

    To quantify the brain maturation process during childhood using combined amide proton transfer (APT) and conventional magnetization transfer (MT) imaging at 3 Tesla. Eighty-two neurodevelopmentally normal children (44 males and 38 females; age range, 2-190 months) were imaged using an APT/MT imaging protocol with multiple saturation frequency offsets. The APT-weighted (APTW) and MT ratio (MTR) signals were quantitatively analyzed in multiple brain areas. Age-related changes in MTR and APTW were evaluated with a non-linear regression analysis. The APTW signals followed a decreasing exponential curve with age in all brain regions measured (R{sup 2} = 0.7-0.8 for the corpus callosum, frontal and occipital white matter, and centrum semiovale). The most significant changes appeared within the first year. At maturation, larger decreases in APTW and lower APTW values were found in the white matter. On the contrary, the MTR signals followed an increasing exponential curve with age in the same brain regions measured, with the most significant changes appearing within the initial 2 years. There was an inverse correlation between the MTR and APTW signal intensities during brain maturation. Together with MT imaging, protein-based APT imaging can provide additional information in assessing brain myelination in the paediatric population. (orig.)

  1. Update on the methodology for Amtrak cost accounting Amtrak performance tracking (APT) : volume 2, appendices A-F.

    Science.gov (United States)

    2016-04-22

    Each table below represents the list of Cost Centers associated with each APT Subfamily at the time the data for this report was gathered from APT in April 2016. The #701 Capital Family is not included as it does not have Cost Centers in a traditiona...

  2. APT cost scaling: Preliminary indications from a Parametric Costing Model (PCM)

    International Nuclear Information System (INIS)

    Krakowski, R.A.

    1995-01-01

    A Parametric Costing Model has been created and evaluate as a first step in quantitatively understanding important design options for the Accelerator Production of Tritium (APT) concept. This model couples key economic and technical elements of APT in a two-parameter search of beam energy and beam power that minimizes costs within a range of operating constraints. The costing and engineering depth of the Parametric Costing Model is minimal at the present open-quotes entry levelclose quotes, and is intended only to demonstrate a potential for a more-detailed, cost-based integrating design tool. After describing the present basis of the Parametric Costing Model and giving an example of a single parametric scaling run derived therefrom, the impacts of choices related to resistive versus superconducting accelerator structures and cost of electricity versus plant availability (open-quotes load curveclose quotes) are reported. Areas of further development and application are suggested

  3. The Analysis of Income per Capita Convergence on ASEAN Plus Three (APT Countries

    Directory of Open Access Journals (Sweden)

    Any Fatiwetunusa

    2017-09-01

    Full Text Available The main objective of this study is to test the convergence of income per capita in APT countries through three models: absolute convergence, conditional convergence and sigma convergence. Regression analysis of panel data from 13 APT countries during the period of 2001-2014 is used to analysed to study problem. In absolute convergence model, the growth of real GDP per capita and initial real GDP are used as the variables, meanwhile, 8 variables such as the growth of real GPD per capita, initial real GDP per capita, labor force ratio, value added in agricultural sector, value added in industrial sector, terms of trade, foreign direct investment and internet users ratio are analyzed in conditional convergence model. According to the Solow model, the economies of the countries will converge in which the growth of income per capita of developing countries will be higher than those of developed countries. The economies will be convergent if the countries tend to move to a similar steady state resulting in smaller gap between the countries. Based on the results of absolute convergence and conditional convergence models, APT countries is converging with the rate of 2% and 2.2%. This is consistent with the results of sigma convergence model that shows a declining trend in the dispersion of real GDP per capita in APT regions. The growth of real GDP per capita is influenced by initial GDP per capita, labor force ratio, value added in agricultural sector, value added in industrial sector, terms of trade, foreign direct investment and internet users ratio. Developed countries such as Singapore, Brunei Darussalam and South Korea experience the impact of high real GDP per capita growth. On the contrary, Indonesia, Laos, Vietnam and The Phillipines undergo the impact of low GDP per capita growth.

  4. The mediation as an apt tool for the prevention of crime as result of gender violence

    OpenAIRE

    Yaíma Águila Gutiérrez; Marileydis Pino Rosa

    2017-01-01

    Violence based in gender is an actual, social, historical and cultural matter. It affects to million persons around the world in the personal, familiar and social ambit. Violence based in gender could damage relationships and also could become in a crime. Mediation is an apt tool to use before the intervention of law for solving gender violence´s conflicts which could need the intervention of criminal law. Those reasons show that is necessary the prevention of gender violence so is important ...

  5. Scientific and engineering services for the LANCE/ER accelerator production of tritium (APT) project

    International Nuclear Information System (INIS)

    1994-01-01

    The APT project office is conducting a preconceptual design study for an accelerator driven concept to produce tritium. The facility will require new technology in many areas, since the scale of this accelerator is significantly larger then any in operation to date. The facility is composed of four subsystems: accelerator, target ampersand blanket, balance of plant, and tritium purification system (TPS). New physics realms will be entered in order for the concept to be feasible; for example, extremely high energy levels of the entering protons that induce (multiplicative) spallation of the neutrons from the high Z target will occur. These are complex and require advance codes (MCNP) to predict the physics interactions and as well as deleterious material effects in the surrounding structures. Other issues include component cooling and complex thermal-hydraulics effects within the blanket and the beam open-quotes window.close quotes In order to support a DOE mandated fast ROD schedule, Los Alamos APT staff will be provided with senior, engineering technical support staff with direct APT technology experience and whom are open-quotes on siteclose quotes. This report contains resumes of the staff

  6. Biomedical applications of SPION@APTES@PEG-folic acid@carboxylated quercetin nanodrug on various cancer cells

    International Nuclear Information System (INIS)

    Akal, Z.Ü.; Alpsoy, L.; Baykal, A.

    2016-01-01

    Highlights: • SPION has been synthesized via Reflux synthesis route. • SPION@APTES@FA-PEG@CQ nanodrug has super paramagnetic property. • SPION@APTES@FA-PEG@CQ nanodrug has cytotoxic, apoptotic and necrotic effects on HeLa and MCF-7 cells. • SPION@APTES@FA-PEG@CQ nanodrug can be potentially used for the delivery of quercetin to cervical and breast cancer cells. - Abstract: In this study, carboxylated quercetin (CQ) was conjugated to superparamagnetic iron oxide nanoparticles (SPIONs) which were modified by (3-aminopropyl) triethoxysilane (APTES), Folic acid (FA) and carboxylated Polyethylene glycol (PEG); (SPION@APTES@FA-PEG@CQ), nanodrug has been synthesized via polyol and accompanying by various chemical synthesis routes. The characterization of the final product was done via X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermal gravimetric analysis (TGA), Transmission electron spectroscopy (TEM) and Vibrating sample magnetometer (VSM). Its cytotoxic and apoptotic activities on over expressed folic acid receptor (FR + ) (MCF-7, HeLa) and none expressed folic acid receptor (FR-) (A549) cancer cell lines were determined by using MTT assay, Real-Time Cell Analysis, TUNEL assay, Annexin assay and RT-PCR analysis for Caspase3/7 respectively. SPION@APTES@FA-PEG@CQ nanodrug showed higher cytotoxicity against HeLa and MCF-7 cell lines as compared with A549 cell line. Moreover, SPION@APTES@FA-PEG@CQ nanodrug also caused higher apoptotic and necrotic effects in 100 μg/mL HeLa and MCF-7 cells than A549 cells. The findings showed that SPION@APTES@FA-PEG@CQ nanodrug has cytotoxic, apoptotic and necrotic effects on HeLa and MCF-7 which are FR over expressed cell lines and can be potentially used for the delivery of quercetin to cervical and breast cancer cells.

  7. Biomedical applications of SPION@APTES@PEG-folic acid@carboxylated quercetin nanodrug on various cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Akal, Z.Ü., E-mail: zulker@fatih.edu.tr [Department of Biology, 34500 Büyükçekmece, Istanbul (Turkey); Alpsoy, L. [Department of Biology, 34500 Büyükçekmece, Istanbul (Turkey); Department of Medical Biology, 34500 Büyükçekmece, Istanbul (Turkey); Baykal, A. [Department of Chemistry, Fatih University, 34500 Büyükçekmece, Istanbul (Turkey)

    2016-08-15

    Highlights: • SPION has been synthesized via Reflux synthesis route. • SPION@APTES@FA-PEG@CQ nanodrug has super paramagnetic property. • SPION@APTES@FA-PEG@CQ nanodrug has cytotoxic, apoptotic and necrotic effects on HeLa and MCF-7 cells. • SPION@APTES@FA-PEG@CQ nanodrug can be potentially used for the delivery of quercetin to cervical and breast cancer cells. - Abstract: In this study, carboxylated quercetin (CQ) was conjugated to superparamagnetic iron oxide nanoparticles (SPIONs) which were modified by (3-aminopropyl) triethoxysilane (APTES), Folic acid (FA) and carboxylated Polyethylene glycol (PEG); (SPION@APTES@FA-PEG@CQ), nanodrug has been synthesized via polyol and accompanying by various chemical synthesis routes. The characterization of the final product was done via X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermal gravimetric analysis (TGA), Transmission electron spectroscopy (TEM) and Vibrating sample magnetometer (VSM). Its cytotoxic and apoptotic activities on over expressed folic acid receptor (FR + ) (MCF-7, HeLa) and none expressed folic acid receptor (FR-) (A549) cancer cell lines were determined by using MTT assay, Real-Time Cell Analysis, TUNEL assay, Annexin assay and RT-PCR analysis for Caspase3/7 respectively. SPION@APTES@FA-PEG@CQ nanodrug showed higher cytotoxicity against HeLa and MCF-7 cell lines as compared with A549 cell line. Moreover, SPION@APTES@FA-PEG@CQ nanodrug also caused higher apoptotic and necrotic effects in 100 μg/mL HeLa and MCF-7 cells than A549 cells. The findings showed that SPION@APTES@FA-PEG@CQ nanodrug has cytotoxic, apoptotic and necrotic effects on HeLa and MCF-7 which are FR over expressed cell lines and can be potentially used for the delivery of quercetin to cervical and breast cancer cells.

  8. Los Modelos CAPM y APT para la valuacion de empresas de Telecomunicaciones con parametros operativos

    Directory of Open Access Journals (Sweden)

    Saldaña, J.

    2007-07-01

    Full Text Available One of the most important research topics in the financial area during de the last years has been the capital assets appraisal or the appraise of shares. This seeks two determine the explanatory factor of the rate of return for a specific portfolio. The CAPM (Capital Asset Pricing Model and the APT (Arbitrage Pricing Theory, both capital asset evaluation models, are hereby presented. The main characteristics of both models are the essential assumptions for their for there development, their statement and the practical test on the telecommunications portfolio using operational, financial and macroeconomics variable, and carried on with the purpose to be compare with reality.

  9. The mediation as an apt tool for the prevention of crime as result of gender violence

    Directory of Open Access Journals (Sweden)

    Yaíma Águila Gutiérrez

    2017-07-01

    Full Text Available Violence based in gender is an actual, social, historical and cultural matter. It affects to million persons around the world in the personal, familiar and social ambit. Violence based in gender could damage relationships and also could become in a crime. Mediation is an apt tool to use before the intervention of law for solving gender violence´s conflicts which could need the intervention of criminal law. Those reasons show that is necessary the prevention of gender violence so is important the intervention of criminology.

  10. Evaluation of deformation response of HMA under APT and wheel tracking tests

    CSIR Research Space (South Africa)

    Denneman, E

    2008-10-01

    Full Text Available . The first phase of the research project consisted of a state of the art survey and a forensic investigation. The forensic investigation in particular provided direction for the later research phases. One of the conclusions of the study was that: Too often... in the laboratory are presented next, followed by the analysis of the data using linear elastic theory. Finally, conclusions are presented. Objectives and scope The primary objectives of the current HMA permanent deformation study are to use APT coupled with a...

  11. Stable isotopes

    International Nuclear Information System (INIS)

    Evans, D.K.

    1986-01-01

    Seventy-five percent of the world's stable isotope supply comes from one producer, Oak Ridge Nuclear Laboratory (ORNL) in the US. Canadian concern is that foreign needs will be met only after domestic needs, thus creating a shortage of stable isotopes in Canada. This article describes the present situation in Canada (availability and cost) of stable isotopes, the isotope enrichment techniques, and related research programs at Chalk River Nuclear Laboratories (CRNL)

  12. APT analyses of deuterium-loaded Fe/V multi-layered films

    KAUST Repository

    Gemma, R.

    2009-04-01

    Interaction of hydrogen with metallic multi-layered thin films remains as a hot topic in recent days Detailed knowledge on such chemically modulated systems is required if they are desired for application in hydrogen energy system as storage media. In this study, the deuterium concentration profile of Fe/V multi-layer was investigated by atom probe tomography (APT) at 60 and 30 K. It is firstly shown that deuterium-loaded sample can easily react with oxygen at the Pd capping layer on Fe/V and therefore, it is highly desired to avoid any oxygen exposure after D(2) loading before APT analysis. The analysis temperature also has an impact on D concentration profile. The result taken at 60 K shows clear traces of surface segregation of D atoms towards analysis surface. The observed diffusion profile of D allows us to estimate an apparent diffusion coefficient D. The calculated D at 60 K is in the order of 10(-17) cm(2)/s, deviating 6 orders of magnitude from an extrapolated value. This was interpreted with alloying, D-trapping at defects and effects of the large extension to which the extrapolation was done. A D concentration profile taken at 30 K shows nosegregation anymore and a homogeneous distribution at C(D) = 0.05(2) D/Me, which is in good accordance with that measured in the corresponding pressure-composition isotherm. (C) 2008 Elsevier B.V. All rights reserved.

  13. Development of a RAMI model for LANSCE and high power APT accelerators

    International Nuclear Information System (INIS)

    Tallerico, P.J.

    1994-01-01

    Assessment of the reliability, availability, maintainability and inspectability (RAMI) of all high power, high cost systems is important to justify and improve the cost effectiveness of these systems. For the very large (over 100 MW) accelerator systems associated with APT, a RAMI model is very valuable in guiding the design and allocation of resources. A RAMI model of an existing machine is also valuable, since machine improvement funds must be allocated to increase the availability by the largest amount. The authors have developed a RAMI model using the critical subsystems of the LANSCE accelerator and beam delivery complex as an example and to evaluate the effectiveness for estimating reliability and beam availability. LAMPF and LANSCE together provide most of the features required for the accelerator and beam delivery part of a high-power APT machine, but LANSCE is pulsed, rather than CW. This complex is capable of a 1-MW average power H - beam, and it is the most powerful proton accelerator in the US built to date

  14. Development of a RAMI model for LANSCE and high power APT accelerators

    Science.gov (United States)

    Tallerico, Paul J.

    1995-07-01

    Assessment of the reliability, availability, maintainability, and inspectability (RAMI) of all high power, high cost systems is important to justify and improve the cost effectiveness of these systems. For the very large (over 100 MW) accelerator systems associated with APT, a RAMI model is very valuable in guiding the design and allocation of resources. A RAMI model of an existing machine is also valuable, since machine improvement funds must be allocated to increase the availability by the largest amount. We have developed a RAMI model using the critical subsystems of the LANSCE accelerator and beam delivery complex as an example and to evaluate the effectiveness for estimating reliability and beam availability. LAMPF and LANSCE together provide most of the features required for the accelerator and beam delivery part of a high-power APT machine, but LANSCE is pulsed, rather than CW. This complex is capable of a 1-MW average power H- beam, and it is the most powerful proton accelerator in the US built to date.

  15. Development of a RAMI model for LANSCE and high power APT accelerators

    International Nuclear Information System (INIS)

    Tallerico, P.J.

    1995-01-01

    Assessment of the reliability, availability, maintainability, and inspectability (RAMI) of all high power, high cost systems is important to justify and improve the cost effectiveness of these systems. For the very large (over 100 MW) accelerator systems associated with APT, a RAMI model is very valuable in guiding the design and allocation of resources. A RAMI model of an existing machine is also valuable, since machine improvement funds must be allocated to increase the availability by the largest amount. We have developed a RAMI model using the critical subsystems of the LANSCE accelerator and beam delivery complex as an example and to evaluate the effectiveness for estimating reliability and beam availability. LAMPF and LANSCE together provide most of the features required for the accelerator and beam delivery part of a high-power APT machine, but LANSCE is pulsed, rather than CW. This complex is capable of a 1-MW average power H - beam, and it is the most powerful proton accelerator in the US built to date. copyright 1995 American Institute of Physics

  16. RAMI modeling of selected balance of plant systems for the proposed Accelerator Production of Tritium (APT) project

    International Nuclear Information System (INIS)

    Radder, J.A.; Cramer, D.S.

    1997-01-01

    In order to meet Department of Energy (DOE) Defense Program requirements for tritium in the 2005-2007 time frame, new production capability must be made available. The Accelerator Production of Tritium (APT) Plant is being considered as an alternative to nuclear reactor production of tritium, which has been the preferred method in the past. The proposed APT plant will use a high-power proton accelerator to generate thermal neutrons that will be captured in 3 He to produce tritium (3H). It is expected that the APT Plant will be built and operated at the DOE's Savannah River Site (SRS) in Aiken, South Carolina. Discussion is focused on Reliability, Availability, Maintainability, and Inspectability (RAMI) modeling of recent conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual designs for balance of plant (BOP) systems in the proposed APT Plant. In the conceptual design phase, system RAMI estimates are necessary to identify the best possible system alternative and to provide a valid picture of the cost effectiveness of the proposed system for comparison with other system alternatives. RAMI estimates in the phase must necessarily be based on generic data. The objective of the RAMI analyses at the conceptual design stage is to assist the designers in achieving an optimum design which balances the reliability and maintainability requirements among the subsystems and components

  17. Aptámeros: agentes diagnósticos y terapéuticos = Aptamers: diagnostic and therapeutic agents

    Directory of Open Access Journals (Sweden)

    Frank J Hernandez

    2012-04-01

    Full Text Available Los aptámeros son ácidos nucleicos de cadena sencilla, ADN o ARN, que reconocen una gran variedad de moléculas. Cada aptámero posee una estructura tridimensional particular que le permite unirse con afinidad y especificidad altas a la molécula diana. Los aptámeros tienen propiedades de reconocimiento equiparables a las de los anticuerpos; sin embargo, por la naturaleza de su composición tienen ventajas significativas en cuanto a su tamaño, producción y modificación. Estas características los hacen excelentes candidatos para el desarrollo de nuevas plataformas biotecnológicas. Se han identificado aptámeros con propiedades terapéuticas que han sido evaluados exitosamente en modelos animales; entre ellos, algunos se encuentran en fase clínica y uno ya fue aprobado para tratamiento por la FDA (Food and Drug Administration. Todos estos avances ocurridos durante las dos últimas décadas permiten anticipar el protagonismo que tendrán los aptámeros como agentes diagnósticos y terapéuticos en un futuro cercano.

  18. Corrosion measurements on apt prototypic materials in the Lansce high-power proton beam and applicability to other systems

    International Nuclear Information System (INIS)

    Lillard, R.S.; Gac, F.D.; James, M.R.; Maloy, S.A.; Paciotti, M.A.; Waters, L.S.; Willcutt, G.J.; Chandler, G.T.; Ferguson, P.D.

    2003-01-01

    The corrosion rates of several corrosion resistant materials behave in a similar manner even under the intense radiation of the LANSCE high-power beam. A second observation was made, showing that the corrosion rates saturated under high instantaneous radiation intensity in corrosion experiments conducted for the accelerator production of tritium (APT) programme. The LANSCE H + beam is not prototypic of the proposed APT production plant in several respects. The instantaneous proton flux in the APT production plant beam is about 10 times that of the LANSCE beam. The small transverse APT beam spot is rastered to spread the power density over the area of the target, and as the beam rasters, it creates a pulsed character to the beam at a specific location. In order to develop correlations that would enable extrapolation of the corrosion data to the proposed APT production plant, the experimental programme included measurements over a range of average beam currents, measurements at high and low instantaneous beam current, and measurements at various combinations of pulse width and repetition rate. The correlations that were developed are based on an approximately linear dependence of corrosion rate on average beam current (average radiation intensity) and the saturation effect observed at high instantaneous radiation intensity. For a given transverse beam profile and for the same average beam current, the correlations predict the highest corrosion rate in a do beam and the lowest corrosion rate in the lowest duty cycle beams. In the case of the APT extrapolation, the predicted corrosion rates were a factor of 5 lower than for a do beam depositing the same average power density. The measured corrosion rates and the formulated extrapolations are applicable to water-cooled targets and components in proton beams. (authors)

  19. Beam dynamics design of the 211 MeV APT normal conducting linac

    International Nuclear Information System (INIS)

    Young, L.M.; Billen, J.H.; Takeda, H.; Wood, R.L.

    1998-01-01

    This paper describes the normal conducting linac design that is part of the Accelerator for Production of Tritium (APT) project. The new version of PARMILA designed this linac. This linac accepts the beam from the 6.7 MeV radio frequency quadrupole without a separate matching section. At about 10 MeV, it has a smooth transition in the length of period from 8βλ to 9βλ in quadrupole focusing lattice. This adjustment of the period was needed to provide sufficient space for the quadrupole focusing magnets and beam diagnostic equipment. The linac consists of the coupled cavity drift tube linac up to 97 MeV and coupled cavity linac above 97 MeV

  20. Development of a raster electronics system for expanding the APT proton beam

    International Nuclear Information System (INIS)

    Chapelle, S.; Hubbard, E.L.; Smith, T.L.; Schulze, M.E.; Shafer, R.E.

    1998-01-01

    A 1700 MeV, 100 mA proton linear accelerator is being designed for Accelerator Production of Tritium (APT). A beam expansion system is required to uniformly irradiate a 19 x 190 cm tritium production target. This paper describes a beam expansion system consisting of eight ferrite dipole magnets to raster the beam in the x- and y-planes and also describes the salient features of the design of the electronics that are unique to the expander. Eight Insulated Gate Bipolar Transistor (IGBT)-based modulators drive the raster magnets with triangular current waveforms that are synchronized using phase-locked loops (PLLs) and voltage controlled crystal oscillators (VCXOs). Fault detection circuitry shuts down the beam before the target can be damaged by a failure of the raster system. Test data are presented for the prototype system

  1. Development of a raster electronics system for expanding the APT proton beam

    Energy Technology Data Exchange (ETDEWEB)

    Chapelle, S.; Hubbard, E.L.; Smith, T.L. [General Atomics, San Diego, CA (United States); Schulze, M.E.; Shafer, R.E. [General Atomics, Los Alamos, NM (United States)

    1998-12-31

    A 1700 MeV, 100 mA proton linear accelerator is being designed for Accelerator Production of Tritium (APT). A beam expansion system is required to uniformly irradiate a 19 x 190 cm tritium production target. This paper describes a beam expansion system consisting of eight ferrite dipole magnets to raster the beam in the x- and y-planes and also describes the salient features of the design of the electronics that are unique to the expander. Eight Insulated Gate Bipolar Transistor (IGBT)-based modulators drive the raster magnets with triangular current waveforms that are synchronized using phase-locked loops (PLLs) and voltage controlled crystal oscillators (VCXOs). Fault detection circuitry shuts down the beam before the target can be damaged by a failure of the raster system. Test data are presented for the prototype system.

  2. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1994-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets, with a few more additions - with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers - exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the foree of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc. (orig.)

  3. Stable particles

    International Nuclear Information System (INIS)

    Samios, N.P.

    1993-01-01

    I have been asked to review the subject of stable particles, essentially the particles that eventually comprised the meson and baryon octets. with a few more additions -- with an emphasis on the contributions made by experiments utilizing the bubble chamber technique. In this activity, much work had been done by the photographic emulsion technique and cloud chambers-exposed to cosmic rays as well as accelerator based beams. In fact, many if not most of the stable particles were found by these latter two techniques, however, the forte of the bubble chamber (coupled with the newer and more powerful accelerators) was to verify, and reinforce with large statistics, the existence of these states, to find some of the more difficult ones, mainly neutrals and further to elucidate their properties, i.e., spin, parity, lifetimes, decay parameters, etc

  4. Micah 7:8-20: An apt conclusion to the book of Micah

    Directory of Open Access Journals (Sweden)

    W J Wessels

    2003-10-01

    Full Text Available It is argued in this article that Micah 7:8-20 forms an apt conclusion to the book of Micah. As was the case with Micah 1, the concluding section also focusses on Yahweh and his dealings with the people of the earth. There is a universal tendency to be detected in this section as well. An important aspect to notice� is� the liturgical nature of chapters six and seven, especially 7:8-20. There is a vagueness, almost a timelessness, imbuing this section. This could be intended allowing later generations of believers to apply these words to� their� own� circumstances. With Micah 7:8-20 as the concluding section of the book, one is left with a sense of well-roundedness, of completeness. The collection of oracles attributed� to Micah in general has a sombre tone. For this very reason Micah� 7:8-20� seems� to� change� the mood. It breathes hope into a negative atmosphere of judgment. It ends with a strong emphasis on the power of Yahweh, the power of forgiveness.

  5. Thermal-hydraulic criteria for the APT tungsten neutron source design

    International Nuclear Information System (INIS)

    Pasamehmetoglu, K.

    1998-03-01

    This report presents the thermal-hydraulic design criteria (THDC) developed for the tungsten neutron source (TNS). The THDC are developed for the normal operations, operational transients, and design-basis accidents. The requirements of the safety analyses are incorporated into the design criteria, consistent with the integrated safety management and the safety-by-design philosophy implemented throughout the APT design process. The phenomenology limiting the thermal-hydraulic design and the confidence level requirements for each limit are discussed. The overall philosophy of the uncertainty analyses and the confidence level requirements also are presented. Different sets of criteria are developed for normal operations, operational transients, anticipated accidents, unlikely accidents, extremely unlikely accidents, and accidents during TNS replacement. In general, the philosophy is to use the strictest criteria for the high-frequency events. The criteria is relaxed as the event frequencies become smaller. The THDC must be considered as a guide for the design philosophy and not as a hard limit. When achievable, design margins greater than those required by the THDC must be used. However, if a specific event sequence cannot meet the THDC, expensive design changes are not necessary if the single event sequence results in sufficient margin to safety criteria and does not challenge the plant availability or investment protection considerations

  6. Surface modification of TiO2 nanotubes by grafting with APTS coupling agents

    Science.gov (United States)

    Phan Duong, Hong; Le, Minh Duc; Dao, Hung Cuong; Chen, Chia-Yun

    2017-10-01

    Titanium dioxide nanotubes (TNTs) have been considered the promising nanostructures employed for many practical applications such as biomedical, photonic and optoelectronic devices. Nevertheless, strong aggregation of TNTs within various aqueous media significantly hindered their practical utilizations and the capability of dispersing TNTs in the desired solvents are urgent to be improved. Therefore, in this study, the methodic investigations have been performed on the grafted modification of 3-aminopropyl triethoxysilane (APTS) on the surfaces of synthesized TNTs. A preliminary study was carried out to evaluate the influences of key parameters, including the concentrations of coupling agents, temperatures and the reaction durations, on the grafting efficiency of the aminosilane using Statistical design of experiments (DoE) methodology. TNTs with approximately 10–20 nm in diameter were prepared with the controlled hydrothermal treatment of commercialized P25 particles. The obtained products were revealed by the modern physicochemical systems including x-ray diffraction (XRD), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) analysis. The additions of silane agent, reaction temperature and time have been adjusted to reveal the influences of the grafting efficiency (from 2.5 to 7.8 wt %) by thermal gravimetric analysis (TGA). Analysis of Fourier transform infrared spectroscopy (FTIR) has confirmed the successful link of Ti–O–Si chemical bonds on the grafted TNTs.

  7. High density gold nanoparticles immobilized on surface via plasma deposited APTES film for decomposing organic compounds in microchannels

    Science.gov (United States)

    Rao, Xi; Guyon, Cédric; Ognier, Stephanie; Da Silva, Bradley; Chu, Chenglin; Tatoulian, Michaël; Hassan, Ali Abou

    2018-05-01

    Immobilization of colloidal particles (e.g. gold nanoparticles (AuNps)) on the inner surface of micro-/nano- channels has received a great interest for catalysis. A novel catalytic ozonation setup using a gold-immobilized microchannel reactor was developed in this work. To anchor AuNps, (3-aminopropyl) triethoxysilane (APTES) with functional amine groups was deposited using plasma enhanced chemical vapor deposition (PECVD) process. The results clearly evidenced that PECVD processing exhibited relatively high efficiency for grafting amine groups and further immobilizing AuNPs. The catalytic activity of gold immobilized microchannel was evaluated by pyruvic acid ozonation. The decomposition rate calculated from High Performance Liquid Chromatography (HPLC) indicated a much better catalytic performance of gold in microchannel than that in batch. The results confirmed immobilizing gold nanoparticles on plasma deposited APTES for preparing catalytic microreactors is promising for the wastewater treatment in the future.

  8. A functional screen implicates microRNA-138-dependent regulation of the depalmitoylation enzyme APT1 in dendritic spine morphogenesis

    DEFF Research Database (Denmark)

    Siegel, Gabriele; Obernosterer, Gregor; Fiore, Roberto

    2009-01-01

    The microRNA pathway has been implicated in the regulation of synaptic protein synthesis and ultimately in dendritic spine morphogenesis, a phenomenon associated with long-lasting forms of memory. However, the particular microRNAs (miRNAs) involved are largely unknown. Here we identify specific mi......RNAs that function at synapses to control dendritic spine structure by performing a functional screen. One of the identified miRNAs, miR-138, is highly enriched in the brain, localized within dendrites and negatively regulates the size of dendritic spines in rat hippocampal neurons. miR-138 controls the expression...... of acyl protein thioesterase 1 (APT1), an enzyme regulating the palmitoylation status of proteins that are known to function at the synapse, including the alpha(13) subunits of G proteins (Galpha(13)). RNA-interference-mediated knockdown of APT1 and the expression of membrane-localized Galpha(13) both...

  9. New tests to detect antiphospholipid antibodies: antiprothrombin (aPT) and anti-phosphatidylserine/prothrombin (aPS/PT) antibodies.

    Science.gov (United States)

    Sciascia, Savino; Khamashta, Munther A; Bertolaccini, Maria Laura

    2014-05-01

    Antiprothrombin antibodies have been proposed as potential new biomarkers for thrombosis and/or pregnancy morbidity in the setting of the antiphospholipid syndrome (APS). Antiprothrombin antibodies are commonly detected by ELISA, using prothrombin coated onto irradiated plates (aPT), or prothrombin in complex with phosphatidylserine (aPS/PT), as antigen. Although these antibodies can co-exist in the same patient, aPT and aPS/PT seem to belong to different populations of autoantibodies. Early research explored the role of antibodies to prothrombin as potential antigenic targets for the lupus anticoagulant (LA). To date their clinical significance is being investigated and their potential role in identifying patients at higher risk of developing thrombotic events or pregnancy morbidity is being probed.

  10. Radiation protection system installation for the accelerator production of tritium/low energy demonstration accelerator project (APT/LEDA)

    CERN Document Server

    Wilmarth, J E; Tomei, T L

    2000-01-01

    The APT/LEDA personnel radiation protection system installation was accomplished using a flexible, modular proven system which satisfied regulatory orders, project design criteria, operational modes, and facility requirements. The goal of providing exclusion and safe access of personnel to areas where prompt radiation in the LEDA facility is produced was achieved with the installation of a DOE-approved Personnel Access Control System (PACS). To satisfy the facility configuration design, the PACS, a major component of the overall radiation safety system, conveniently provided five independent areas of personnel access control. Because of its flexibility and adaptability the Los-Alamos Neutron- Science-Center-(LANSCE)-designed Radiation Security System (RSS) was efficiently configured to provide the desired operational modes and satisfy the APT/LEDA project design criteria. The Backbone Beam Enable (BBE) system based on the LANSCE RSS provided the accelerator beam control functions with redundant, hardwired, ta...

  11. Stable beams

    CERN Multimedia

    2015-01-01

    Stable beams: two simple words that carry so much meaning at CERN. When LHC page one switched from "squeeze" to "stable beams" at 10.40 a.m. on Wednesday, 3 June, it triggered scenes of jubilation in control rooms around the CERN sites, as the LHC experiments started to record physics data for the first time in 27 months. This is what CERN is here for, and it’s great to be back in business after such a long period of preparation for the next stage in the LHC adventure.   I’ve said it before, but I’ll say it again. This was a great achievement, and testimony to the hard and dedicated work of so many people in the global CERN community. I could start to list the teams that have contributed, but that would be a mistake. Instead, I’d simply like to say that an achievement as impressive as running the LHC – a machine of superlatives in every respect – takes the combined effort and enthusiasm of everyone ...

  12. Chemotherapy-related amenorrhea after adjuvant paclitaxel-trastuzumab (APT trial).

    Science.gov (United States)

    Ruddy, Kathryn J; Guo, Hao; Barry, William; Dang, Chau T; Yardley, Denise A; Moy, Beverly; Marcom, P Kelly; Albain, Kathy S; Rugo, Hope S; Ellis, Matthew J; Shapira, Iuliana; Wolff, Antonio C; Carey, Lisa A; Overmoyer, Beth A; Hudis, Clifford; Krop, Ian E; Burstein, Harold J; Winer, Eric P; Partridge, Ann H; Tolaney, Sara M

    2015-06-01

    Chemotherapy-related amenorrhea (CRA) is associated with infertility and menopausal symptoms. Learning how frequently paclitaxel and trastuzumab cause amenorrhea is important. Most other adjuvant breast cancer therapies induce CRA in approximately 50 % of all premenopausal recipients [1]. 410 patients enrolled on the APT Trial, a single-arm phase 2 adjuvant study of 12 weeks of paclitaxel and trastuzumab followed by nine months of trastuzumab monotherapy. Eligible patients had ≤3 cm node-negative HER2 + breast cancers. Premenopausal enrollees were asked to complete menstrual surveys every 3-12 months for 72 months. Women who responded to at least one survey at least 15 months after chemotherapy initiation (and who did not undergo hysterectomy and/or bilateral oophorectomy or receive ovarian suppressing medications prior to 15 months) were included in this analysis. A participant was defined as having amenorrhea in follow-up if her self-reported last menstrual period at last follow-up was greater than 12 months prior to the survey. Among the 64 women in the evaluable population (median age at study entry 44 years, range 27-52 years), the median time between chemotherapy initiation and last menstrual survey was 51 months (range 16-79). 18 of 64 women (28 %, 95 % CI 18-41 %) were amenorrheic at that time point. Amenorrhea rates among premenopausal women treated with adjuvant paclitaxel and trastuzumab for early stage breast cancer appear lower than those seen historically with standard alkylator-based breast cancer regimens. Future studies are needed to understand the impact of this regimen on related issues of fertility and menopausal symptoms.

  13. APT Blanket System Loss-of-Coolant Accident Based on Initial Conceptual Design - Case 5: External RHR Break Near Inlet Header

    Energy Technology Data Exchange (ETDEWEB)

    Hamm, L.L.

    1998-10-07

    This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal system. These simulations were performed for the Preliminary Safety Analysis Report.

  14. APT Blanket System Loss-of-Flow Accident (LOFA) Analysis Based on Initial Conceptual Design - Case 1: with Beam Shutdown and Active RHR

    International Nuclear Information System (INIS)

    Hamm, L.L.

    1998-01-01

    This report is one of a series of reports that document normal operation and accident simulations for the Accelerator Production of Tritium (APT) blanket heat removal system. These simulations were performed for the Preliminary Safety Analysis Report

  15. Anti-prothrombin (aPT) and anti-phosphatidylserine/prothrombin (aPS/PT) antibodies and the risk of thrombosis in the antiphospholipid syndrome. A systematic review.

    Science.gov (United States)

    Sciascia, Savino; Sanna, Giovanni; Murru, Veronica; Roccatello, Dario; Khamashta, Munther A; Bertolaccini, Maria Laura

    2014-02-01

    Antibodies to prothrombin are detected by directly coating prothrombin on irradiated ELISA plates (aPT) or by using the phosphatidylserine/prothrombin complex as antigen (aPS/PT). Although these antibodies have both been associated with antiphospholipid syndrome (APS) and a correlation between the two assays have been reported, it seems that aPT and aPS/PT belong to different populations of autoantibodies. It was our objective to systematically review the available evidence on aPT and aPS/PT antibodies and the risk of thrombosis in APS. Medline-reports published between 1988 and 2013 investigating aPT and aPS/PT as a risk factor for thrombosis were included. Whenever possible, antibody isotype(s) and site of thrombosis were analysed. This systematic review is based on available data from more than 7,000 patients and controls from 38 studies analysing aPT and 10 aPS/PT. Antibodies to prothrombin (both aPT and aPS/PT) increased the risk of thrombosis (odds ratio [OR] 2.3; 95% confidence interval [CI] 1.72-3.5). aPS/PT seemed to represent a stronger risk factor for thrombosis, both arterial and/or venous than aPT (OR 5.11; 95%CI 4.2-6.3 and OR 1.82; 95%CI 1.44-2.75, respectively). In conclusion, routine measurement of aPS/PT (but not aPT) might be useful in establishing the thrombotic risk of patients with previous thrombosis and/or systemic lupus erythematosus. Their inclusion as laboratory criteria for the APS should be indisputably further explored.

  16. Recombinant soluble apyrase APT102 inhibits thrombosis and intimal hyperplasia in vein grafts without adversely affecting hemostasis or re-endothelialization.

    Science.gov (United States)

    Ji, Y; Adeola, O; Strawn, T L; Jeong, S S; Chen, R; Fay, W P

    2017-04-01

    Essentials New strategies are needed to inhibit thrombosis and intimal hyperplasia (IH) in vein grafts (VG). We studied effects of apyrase (APT102) on VGs and smooth muscle and endothelial cells (SMC/EC). APT102 inhibited thrombosis, SMC migration, and IH without impairing hemostasis or EC recovery. Apyrase APT102 is a single-drug approach to inhibit multiple processes that cause VG failure. Background Occlusion of vein grafts (VGs) after bypass surgery, owing to thrombosis and intimal hyperplasia (IH), is a major clinical problem. Apyrases are enzymes that scavenge extracellular ATP and ADP, and promote adenosine formation at sites of vascular injury, and hence have the potential to inhibit VG pathology. Objectives To examine the effects of recombinant soluble human apyrase, APT102, on platelets, smooth muscle cells (SMCs) and endothelial cells (ECs) in vitro, and on thrombosis and IH in murine VGs. Methods SMC and EC proliferation and migration were studied in vitro. Inferior vena cava segments from donor mice were grafted into carotid arteries of recipient mice. Results APT102 potently inhibited ADP-induced platelet aggregation and VG thrombosis, but it did not impair surgical hemostasis. APT102 did not directly inhibit SMC or EC proliferation, but significantly attenuated the effects of ATP on SMC and EC proliferation. APT102 significantly inhibited SMC migration, but did not inhibit EC migration, which may be mediated, at least in part, by inhibition of SMC, but not EC, migration by adenosine. At 4 weeks after surgery, there was significantly less IH in VGs of APT102-treated mice than in control VGs. APT102 significantly inhibited cell proliferation in VGs, but did not inhibit re-endothelialization. Conclusions Systemic administration of a recombinant human apyrase inhibits thrombosis and IH in VGs without increasing bleeding or compromising re-endothelialization. These results suggest that APT102 has the potential to become a novel, single-drug treatment

  17. AptRank: an adaptive PageRank model for protein function prediction on   bi-relational graphs.

    Science.gov (United States)

    Jiang, Biaobin; Kloster, Kyle; Gleich, David F; Gribskov, Michael

    2017-06-15

    Diffusion-based network models are widely used for protein function prediction using protein network data and have been shown to outperform neighborhood-based and module-based methods. Recent studies have shown that integrating the hierarchical structure of the Gene Ontology (GO) data dramatically improves prediction accuracy. However, previous methods usually either used the GO hierarchy to refine the prediction results of multiple classifiers, or flattened the hierarchy into a function-function similarity kernel. No study has taken the GO hierarchy into account together with the protein network as a two-layer network model. We first construct a Bi-relational graph (Birg) model comprised of both protein-protein association and function-function hierarchical networks. We then propose two diffusion-based methods, BirgRank and AptRank, both of which use PageRank to diffuse information on this two-layer graph model. BirgRank is a direct application of traditional PageRank with fixed decay parameters. In contrast, AptRank utilizes an adaptive diffusion mechanism to improve the performance of BirgRank. We evaluate the ability of both methods to predict protein function on yeast, fly and human protein datasets, and compare with four previous methods: GeneMANIA, TMC, ProteinRank and clusDCA. We design four different validation strategies: missing function prediction, de novo function prediction, guided function prediction and newly discovered function prediction to comprehensively evaluate predictability of all six methods. We find that both BirgRank and AptRank outperform the previous methods, especially in missing function prediction when using only 10% of the data for training. The MATLAB code is available at https://github.rcac.purdue.edu/mgribsko/aptrank . gribskov@purdue.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  18. The RF system for the Accelerator Production of Tritium (APT) Low Energy Demonstration Accelerator (LEDA) at Los Alamos

    International Nuclear Information System (INIS)

    Lynch, M.T.; Rees, D.; Tallerico, P.; Regan, A.

    1996-01-01

    To develop and demonstrate the crucial front end of the APT accelerator and some of the critical components for APT, Los Alamos is building a CW proton accelerator (LEDA) to provide 100 mA at up to 40 MeV. LEDA will be installed where the SDI-sponsored Ground Test Accelerator was located. The first accelerating structure for LEDA is a 7-MeV RFQ operating at 350 MHz, followed by several stages of a coupled-cavity Drift Tube Linac (CCDTL) operating at 700 MHz. The first stage of LEDA will go to 12 MeV. Higher energies, up to 40 MeV, come later in the program. Three 1.2-MW CW RF systems will be used to power the RFQ. This paper describes the RF systems being assembled for LEDA, including the 350 and 700-MHz klystrons, the High Voltage Power Supplies, transmitters, RF transport, window/coupler assemblies, and controls. Some of the limitations imposed by the schedule and the building itself are addressed

  19. Characteristics of Polysilicon Wire Glucose Sensors with a Surface Modified by Silica Nanoparticles/γ-APTES Nanocomposite

    Directory of Open Access Journals (Sweden)

    Jheng-Jia Jhuang

    2011-03-01

    Full Text Available This report investigates the sensing characteristics of polysilicon wire (PSW glucose biosensors, including thickness characteristics and line-width effects on detection limits, linear range and interference immunity with membranes coated by micropipette/spin-coating and focus-ion-beam (FIB processed capillary atomic-force-microscopy (C-AFM tip scan/coating methods. The PSW surface was modified with a mixture of 3-aminopropyl-triethoxysilane (γ-APTES and polydimethylsiloxane (PDMS-treated hydrophobic fumed silica nanoparticles (NPs. We found that the thickness of the γ-APTES+NPs nonocomposite could be controlled well at about 22 nm with small relative standard deviation (RSD with repeated C-AFM tip scan/coatings. The detection limit increased and linear range decreased with the line width of the PSW through the tip-coating process. Interestingly, the interference immunity ability improves as the line width increases. For a 500 nm-wide PSW, the percentage changes of the channel current density changes (ΔJ caused by acetaminophen (AP can be kept below 3.5% at an ultra-high AP-to-glucose concentration ratio of 600:1. Simulation results showed that the line width dependence of interference immunity was strongly correlated with the channel electrical field of the PSW biosensor.

  20. Prevalence of antibodies to prothrombin in solid phase (aPT) and to phosphatidylserine-prothrombin complex (aPS/PT) in patients with and without lupus anticoagulant.

    Science.gov (United States)

    Bertolaccini, Maria Laura; Sciascia, Savino; Murru, Veronica; Garcia-Fernandez, Cesar; Sanna, Giovanni; Khamashta, Munther A

    2013-02-01

    Antibodies to prothrombin in solid phase (aPT) and those to phosphatidiyserine-prothrombin complex (aPS/PT) have been suggested to strongly correlate with the presence of lupus anticoagulant (LA). As their clinical diagnostic value and true relationship with the LA remains elusive, we designed this study to evaluate the prevalence and significance of aPT and aPS/PT in a large cohort of patients with and without LA. Samples from 257 patients were included. aPT and aPS/PT were tested by ELISA. LA was tested as per the current criteria from the ISTH Subcommittee on LA-Phospholipid-dependent antibodies. aPS/PT and aPT were found in 51% and 32% of LA-positive (LA+ve) patients and in 22% and 28% of LA-negative (LA-ve) patients, respectively. Thrombosis, particularly venous thrombosis was associated with IgG aPT in the LA+ve group (p=0.0006) and in the LA-ve group (p=0.017). Antibodies to phosphatidylserine-prothrombin, either IgG and IgM were associated with thrombosis in general (p=0.0003) in particularly with venous thrombosis in the LA+ve group (paPS/PT were independent risk factors for thrombosis and pregnancy loss. In conclusion, aPS/PT, but not aPT, are more frequently found in patients with LA. Their association with thrombosis seems to be independent of the presence of LA.

  1. Stable Isotope Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Tissue samples (skin, bone, blood, muscle) are analyzed for stable carbon, stable nitrogen, and stable sulfur analysis. Many samples are used in their entirety for...

  2. APTES Functionalized Iron Oxide-Silver Magnetic Hetero-Nanocomposites for Selective Capture and Rapid Removal of Salmonella enteritidis from Aqueous Solution

    Science.gov (United States)

    Trang, Vu Thi; Dinh, Ngo Xuan; Lan, Hoang; Tam, Le Thi; Huy, Tran Quang; Tuan, Pham Anh; Phan, Vu Ngoc; Le, Anh-Tuan

    2018-02-01

    Magnetic nanomaterials, as a promising platform for the fast and sensitive detection of bacterial pathogens, have attracted increasing interest from researchers in recent years. In this work, by utilizing a two-step synthetic technique consisting of co-precipitation and subsequent hydrothermal reaction, followed by functionalization steps with (3-aminopropyl)triethoxysilane (APTES) and the antibody against Salmonella enteritidis, antibody-conjugated Fe3O4-Ag@APTES hetero-nanocomposites were successfully prepared. Due to the specific antibody, the developed Fe3O4-Ag@APTES@SE-Ab conjugates are capable of selectively capturing S. enteritidis at a low concentration of about 101 CFU/mL. Moreover, the prepared magnetic conjugates also revealed that the S. enteritidis could be rapidly removed from water solution in 20 min by using an external magnetic field with a removal efficiency obtained of ˜ 91.36%. These results indicated that the Fe3O4-Ag@APTES@SE-Ab conjugates are promising for the rapid selective capture and removal of bacterial pathogens from aqueous environments, and can be used for improving the detection quality of pathogens in water samples using immunosensor-based diagnostic tests.

  3. Stable convergence and stable limit theorems

    CERN Document Server

    Häusler, Erich

    2015-01-01

    The authors present a concise but complete exposition of the mathematical theory of stable convergence and give various applications in different areas of probability theory and mathematical statistics to illustrate the usefulness of this concept. Stable convergence holds in many limit theorems of probability theory and statistics – such as the classical central limit theorem – which are usually formulated in terms of convergence in distribution. Originated by Alfred Rényi, the notion of stable convergence is stronger than the classical weak convergence of probability measures. A variety of methods is described which can be used to establish this stronger stable convergence in many limit theorems which were originally formulated only in terms of weak convergence. Naturally, these stronger limit theorems have new and stronger consequences which should not be missed by neglecting the notion of stable convergence. The presentation will be accessible to researchers and advanced students at the master's level...

  4. Visible light-sensitive APTES-bound ZnO nanowire toward a potent nanoinjector sensing biomolecules in a living cell

    Science.gov (United States)

    Lee, Jooran; Choi, Sunyoung; Bae, Seon Joo; Yoon, Seok Min; Choi, Joon Sig; Yoon, Minjoong

    2013-10-01

    Nanoscale cell injection techniques combined with nanoscopic photoluminescence (PL) spectroscopy have been important issues in high-resolution optical biosensing, gene and drug delivery and single-cell endoscopy for medical diagnostics and therapeutics. However, the current nanoinjectors remain limited for optical biosensing and communication at the subwavelength level, requiring an optical probe such as semiconductor quantum dots, separately. Here, we show that waveguided red emission is observed at the tip of a single visible light-sensitive APTES-modified ZnO nanowire (APTES-ZnO NW) and it exhibits great enhancement upon interaction with a complementary sequence-based double stranded (ds) DNA, whereas it is not significantly affected by non-complementary ds DNA. Further, the tip of a single APTES-ZnO NW can be inserted into the subcellular region of living HEK 293 cells without significant toxicity, and it can also detect the enhancement of the tip emission from subcellular regions with high spatial resolution. These results indicate that the single APTES-ZnO NW would be useful as a potent nanoinjector which can guide visible light into intracellular compartments of mammalian cells, and can also detect nanoscopic optical signal changes induced by interaction with the subcellular specific target biomolecules without separate optical probes.Nanoscale cell injection techniques combined with nanoscopic photoluminescence (PL) spectroscopy have been important issues in high-resolution optical biosensing, gene and drug delivery and single-cell endoscopy for medical diagnostics and therapeutics. However, the current nanoinjectors remain limited for optical biosensing and communication at the subwavelength level, requiring an optical probe such as semiconductor quantum dots, separately. Here, we show that waveguided red emission is observed at the tip of a single visible light-sensitive APTES-modified ZnO nanowire (APTES-ZnO NW) and it exhibits great enhancement upon

  5. Quantitative description of proton exchange processes between water and endogenous and exogenous agents for WEX, CEST, and APT experiments.

    Science.gov (United States)

    Zhou, Jinyuan; Wilson, David A; Sun, Phillip Zhe; Klaus, Judith A; Van Zijl, Peter C M

    2004-05-01

    The proton exchange processes between water and solutes containing exchangeable protons have recently become of interest for monitoring pH effects, detecting cellular mobile proteins and peptides, and enhancing the detection sensitivity of various low-concentration endogenous and exogenous species. In this work, the analytic expressions for water exchange (WEX) filter spectroscopy, chemical exchange-dependent saturation transfer (CEST), and amide proton transfer (APT) experiments are derived by the use of Bloch equations with exchange terms. The effects of the initial states for the system, the difference between a steady state and a saturation state, and the relative contributions of the forward and backward exchange processes are discussed. The theory, in combination with numerical calculations, provides a useful tool for designing experimental schemes and assessing magnetization transfer (MT) processes between water protons and solvent-exchangeable protons. As an example, the case of endogenous amide proton exchange in the rat brain at 4.7 T is analyzed in detail. Copyright 2004 Wiley-Liss, Inc.

  6. stableGP

    Data.gov (United States)

    National Aeronautics and Space Administration — The code in the stableGP package implements Gaussian process calculations using efficient and numerically stable algorithms. Description of the algorithms is in the...

  7. First Characterization of the Ultra-Shielded Chamber in the Low-noise Underground Laboratory (LSBB) of Rustrel Pays d'Apt

    OpenAIRE

    Waysand, G.; Bloyet, D.; Bongiraud, J. P.; Collar, J. I.; Dolabdjian, C.; Thiec, Ph. Le

    1999-01-01

    In compliance with international agreements on nuclear weapons limitation, the French ground-based nuclear arsenal has been decommissioned in its totality. One of its former underground missile control centers, located in Rustrel, 60 km east of Avignon (Provence) has been converted into the ``Laboratoire Souterrain \\`a Bas Bruit de Rustrel-Pays d'Apt'' (LSBB). The deepest experimental hall (500 m of calcite rock overburden) includes a 100 m$^{2}$ area of sturdy flooring suspended by and resti...

  8. Microradiographic investigations on experimentally provoked structural alterations in hard tooth tissues after sealing with plastic material in places where caries is apt to develop

    International Nuclear Information System (INIS)

    Falten, E.

    1981-01-01

    The aim of the present investigation was, after sealing three areas in extracted human teeth: fissures, dental necksand approximate areas and subsequent exposure to experimentally produced cariogenous noxae, to establish possible alterations in the area of transition between sealed and unsealed dental enamal. This would provide a further decision-taking aid with regard to the question whether also the remaining parts where caries is apt to develop should be sealed. (orig./MG) [de

  9. IN VITRO Cr(VI SPECIATION IN SYNTHETIC SALIVA AFTER RELEASING FROM ORTHODONTIC BRACKETS USING SILICA-APTES SEPARATION AND GF AAS DETERMINATION

    Directory of Open Access Journals (Sweden)

    Maciel S. Luz

    Full Text Available A method for Cr(VI speciation in synthetic saliva after releasing from orthodontic brackets, using silica nanoparticles organofunctionalized with (3-aminopropyltriethoxysilane (APTES for Cr(III/Cr(VI separation and GF AAS determination is proposed. Under the optimized conditions, Cr(VI speciation was performed using 150 mg of silica organofunctionalized with 2.0% (v v-1 of APTES at pH 8. It was observed different sensitivity when calibrations of GF AAS were performed using Cr(III or Cr(VI as standard solutions. Consequently, calibrations using stoichiometric mixtures (Cr(III + Cr(VI were used for total Cr determination and calibration using Cr(VI was used only for the determination of this specie. The reliability of the proposed silica-APTES separation procedure and GF AAS determination was checked by addition of both species in synthetic saliva. Recoveries ranging from 97 to 110% were obtained. The repeatability, based on the relative standard deviation (RSD inter days was less than 6%. A corrosion test was carried out on 20 orthodontic brackets from two different models, after immersion in synthetic saliva (pH=6.0 at 37 °C with agitation (125 rpm for 24 h. It was observed that about 40% of the total chromium released from the analyzed orthodontic brackets was Cr(VI.

  10. Critical assessment of Cr-rich precipitates in neutron-irradiated Fe-12 at%Cr: Comparison of SANS and APT

    Science.gov (United States)

    Bergner, F.; Pareige, C.; Kuksenko, V.; Malerba, L.; Pareige, P.; Ulbricht, A.; Wagner, A.

    2013-11-01

    Neutron irradiation at 300 °C up to 0.6 dpa of an industrial purity Fe-12at%Cr alloy gives rise to the formation of Cr-rich precipitates of radii of about 1 nm. Small-angle neutron scattering (SANS) and atom probe tomography (APT) applied to the same material should reveal consistent characteristics of the irradiation-induced features. They roughly do so with respect to size and volume fraction, but they do not with respect to the composition of the precipitates or clusters. The discrepancy was expressed in terms of the Porod invariant of nuclear SANS. This quantity can be determined directly by integrating the measured nuclear difference scattering cross section or, alternatively, estimated from the APT results. Both estimates were compared taking into account all potential sources of deviation including error propagation. We have found that the deviation is significant and can be progressively removed by artificially reducing the Fe fraction in the Cr-rich clusters with respect to the measured value. A well-known effect of this kind is the different evaporation fields of Cr-rich clusters and the Fe-rich matrix and resulting ion trajectory overlaps in APT. State-of-the-art consideration of this effect indicates, however, that it is not sufficient to remove the observed discrepancy.

  11. Apte, Dr Shree Kumar

    Indian Academy of Sciences (India)

    Specialization: Molecular Biology & Biotechnology, Physiology and Stress Biology of Bacteria & Plants Address: Emeritus Professor, Homi Bhabha National Institute, Anushakti Nagar, Mumbai 400 085, Maharashtra Contact: Office: (022) 2559 3638. Residence: (022) 2558 0177. Mobile: 98694 80205. Fax: (022) 2550 5151, ...

  12. Stable isotopes labelled compounds

    International Nuclear Information System (INIS)

    1982-09-01

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  13. Stable Boundary Layer Issues

    NARCIS (Netherlands)

    Steeneveld, G.J.

    2012-01-01

    Understanding and prediction of the stable atmospheric boundary layer is a challenging task. Many physical processes are relevant in the stable boundary layer, i.e. turbulence, radiation, land surface coupling, orographic turbulent and gravity wave drag, and land surface heterogeneity. The

  14. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    IAS Admin

    After Maynard-Smith and Price [1] mathematically derived why a given behaviour or strategy was adopted by a certain proportion of the population at a given time, it was shown that a strategy which is currently stable in a population need not be stable in evolutionary time (across generations). Additionally it was sug-.

  15. Normal modified stable processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Shephard, N.

    2002-01-01

    This paper discusses two classes of distributions, and stochastic processes derived from them: modified stable (MS) laws and normal modified stable (NMS) laws. This extends corresponding results for the generalised inverse Gaussian (GIG) and generalised hyperbolic (GH) or normal generalised inverse...... Gaussian (NGIG) laws. The wider framework thus established provides, in particular, for added flexibility in the modelling of the dynamics of financial time series, of importance especially as regards OU based stochastic volatility models for equities. In the special case of the tempered stable OU process...

  16. Applications of stable isotopes

    International Nuclear Information System (INIS)

    Letolle, R.; Mariotti, A.; Bariac, T.

    1991-06-01

    This report reviews the historical background and the properties of stable isotopes, the methods used for their measurement (mass spectrometry and others), the present technics for isotope enrichment and separation, and at last the various present and foreseeable application (in nuclear energy, physical and chemical research, materials industry and research; tracing in industrial, medical and agronomical tests; the use of natural isotope variations for environmental studies, agronomy, natural resources appraising: water, minerals, energy). Some new possibilities in the use of stable isotope are offered. A last chapter gives the present state and forecast development of stable isotope uses in France and Europe

  17. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  18. Retraction: Osmotic dehydration of fish: Principal component analysis. APTEFF, 45 (2014 45-53, DOI: 10.2298/APT1445045L

    Directory of Open Access Journals (Sweden)

    Editorial

    2016-01-01

    Full Text Available On the proposition of the Editorial Board and with the consent of the authors, the paper entitled: OSMOTIC DEHYDRATION OF FISH: PRINCIPAL COMPONENT ANALYSIS, by the authors: Biljana Lj. Lončar (née Čurćić, Lato L. Pezo, Ljubinko B. Lević, Vladimir S. Filipović, Milica R. Nićetin, Violeta M. Knežević and Tatjana A. Kuljanin, published in 2014 (Vol. 45, pp. 45-53, DOI: 10.2298/APT1445045L, is retracted because it is an autoplagiarism of the paper of the authors B. L. Ćurčić, L. L Pezo, V. S. Filipović, M.R. Nićetin and V. Knežević „OSMOTIC TREATMENT OF FISH IN TWO DIFFERENT SOLUTIONS - ARTIFICAL NEURAL NETWORK MODEL“, which was accepted for publication on May 9th 2014 (DOI: 10.1111/jfpp.12275 and published in 2015 in the Journal of Food Processing and Preservation (Vol. 39, pp. 671-680. Link to the retracted article 10.2298/APT1445045L

  19. Calcium stable isotope geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gausonne, Nikolaus [Muenster Univ. (Germany). Inst. fuer Mineralogie; Schmitt, Anne-Desiree [Strasbourg Univ. (France). LHyGeS/EOST; Heuser, Alexander [Bonn Univ. (Germany). Steinmann-Inst. fuer Geologie, Mineralogie und Palaeontologie; Wombacher, Frank [Koeln Univ. (Germany). Inst. fuer Geologie und Mineralogie; Dietzel, Martin [Technische Univ. Graz (Austria). Inst. fuer Angewandte Geowissenschaften; Tipper, Edward [Cambridge Univ. (United Kingdom). Dept. of Earth Sciences; Schiller, Martin [Copenhagen Univ. (Denmark). Natural History Museum of Denmark

    2016-08-01

    This book provides an overview of the fundamentals and reference values for Ca stable isotope research, as well as current analytical methodologies including detailed instructions for sample preparation and isotope analysis. As such, it introduces readers to the different fields of application, including low-temperature mineral precipitation and biomineralisation, Earth surface processes and global cycling, high-temperature processes and cosmochemistry, and lastly human studies and biomedical applications. The current state of the art in these major areas is discussed, and open questions and possible future directions are identified. In terms of its depth and coverage, the current work extends and complements the previous reviews of Ca stable isotope geochemistry, addressing the needs of graduate students and advanced researchers who want to familiarize themselves with Ca stable isotope research.

  20. Evolutionary Stable Strategy

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... Home; Journals; Resonance – Journal of Science Education; Volume 21; Issue 9. Evolutionary Stable Strategy: Application of Nash Equilibrium in Biology. General ... Using some examples of classical games, we show how evolutionary game theory can help understand behavioural decisions of animals.

  1. The Stable Concordance Genus

    OpenAIRE

    Kearney, M. Kate

    2013-01-01

    The concordance genus of a knot is the least genus of any knot in its concordance class. Although difficult to compute, it is a useful invariant that highlights the distinction between the three-genus and four-genus. In this paper we define and discuss the stable concordance genus of a knot, which describes the behavior of the concordance genus under connected sum.

  2. Manifolds admitting stable forms

    Czech Academy of Sciences Publication Activity Database

    Le, Hong-Van; Panák, Martin; Vanžura, Jiří

    2008-01-01

    Roč. 49, č. 1 (2008), s. 101-11 ISSN 0010-2628 R&D Projects: GA ČR(CZ) GP201/05/P088 Institutional research plan: CEZ:AV0Z10190503 Keywords : stable forms * automorphism groups Subject RIV: BA - General Mathematics

  3. Stable isotope studies

    International Nuclear Information System (INIS)

    Ishida, T.

    1992-01-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs

  4. Interactive Stable Ray Tracing

    DEFF Research Database (Denmark)

    Dal Corso, Alessandro; Salvi, Marco; Kolb, Craig

    2017-01-01

    Interactive ray tracing applications running on commodity hardware can suffer from objectionable temporal artifacts due to a low sample count. We introduce stable ray tracing, a technique that improves temporal stability without the over-blurring and ghosting artifacts typical of temporal post-pr...

  5. The stable subgroup graph

    Directory of Open Access Journals (Sweden)

    Behnaz Tolue

    2018-07-01

    Full Text Available In this paper we introduce stable subgroup graph associated to the group $G$. It is a graph with vertex set all subgroups of $G$ and two distinct subgroups $H_1$ and $H_2$ are adjacent if $St_{G}(H_1\\cap H_2\

  6. Stable isotope analysis

    International Nuclear Information System (INIS)

    Tibari, Elghali; Taous, Fouad; Marah, Hamid

    2014-01-01

    This report presents results related to stable isotopes analysis carried out at the CNESTEN DASTE in Rabat (Morocco), on behalf of Senegal. These analyzes cover 127 samples. These results demonstrate that Oxygen-18 and Deuterium in water analysis were performed by infrared Laser spectroscopy using a LGR / DLT-100 with Autosampler. Also, the results are expressed in δ values (‰) relative to V-SMOW to ± 0.3 ‰ for oxygen-18 and ± 1 ‰ for deuterium.

  7. Forensic Stable Isotope Biogeochemistry

    Science.gov (United States)

    Cerling, Thure E.; Barnette, Janet E.; Bowen, Gabriel J.; Chesson, Lesley A.; Ehleringer, James R.; Remien, Christopher H.; Shea, Patrick; Tipple, Brett J.; West, Jason B.

    2016-06-01

    Stable isotopes are being used for forensic science studies, with applications to both natural and manufactured products. In this review we discuss how scientific evidence can be used in the legal context and where the scientific progress of hypothesis revisions can be in tension with the legal expectations of widely used methods for measurements. Although this review is written in the context of US law, many of the considerations of scientific reproducibility and acceptance of relevant scientific data span other legal systems that might apply different legal principles and therefore reach different conclusions. Stable isotopes are used in legal situations for comparing samples for authenticity or evidentiary considerations, in understanding trade patterns of illegal materials, and in understanding the origins of unknown decedents. Isotope evidence is particularly useful when considered in the broad framework of physiochemical processes and in recognizing regional to global patterns found in many materials, including foods and food products, drugs, and humans. Stable isotopes considered in the larger spatial context add an important dimension to forensic science.

  8. First characterization of the ultra-shielded chamber in the low-noise underground laboratory (LSBB) of Rustrel-Pays d'Apt

    International Nuclear Information System (INIS)

    Waysand, G.; Bloyet, D.; Bongiraud, J.P.; Collar, J.I.; Dolabdjian, C.; Le Thiec, Ph.

    2000-01-01

    In compliance with international agreements on nuclear weapons limitation, the French ground-based nuclear arsenal has been decommissioned in its totality. One of its former underground missile control centers, located in Rustrel, 60 km east of Avignon (Provence) has been converted into the 'Laboratoire Souterrain a Bas Bruit de Rustrel-Pays d'Apt' (LSBB). The deepest experimental hall (500 m of calcite rock overburden) includes a 100 m 2 area of sturdy flooring suspended by and resting on shock absorbers, entirely enclosed in a 28 m long, 8 m diameter, 1 cm thick steel capsule. This results in an unparalleled combination of shielding against cosmic rays, acoustic, seismic and electromagnetic noise, which can be exploited for rare event searches using ultra low-temperature and superconducting detectors. The first characterization measurements in this unique civilian site are reported

  9. Evolvement of cell-substrate interaction over time for cells cultivated on a 3-aminopropyltriethoxysilane (γ-APTES) modified silicon dioxide (SiO2) surface

    Science.gov (United States)

    Hsu, Chung-Ping; Hsu, Po-Yen; Wu, You-Lin; Hsu, Wan-Yun; Lin, Jing-Jenn

    2012-09-01

    Since cell-substrate interaction is directly related to the traction force of the cell, the cell property can be judged from the imprint it leaves on the soft substrate surface onto which the cell is cultured. In this letter, the evolvement of the cell-substrate interaction over time was observed by cultivating cells on a 3-aminopropyltriethoxysilane (γ-APTES) modified silicon dioxide (SiO2) surface for different periods of time. The cell-substrate interaction property as a function of time can then be found from the post-cell-removal surface morphology profiles determined by atomic force microscopy (AFM). Different surface morphology profiles were found between normal cells and cancer cells. It was found that the cancer cells tend to form deeper trenches along the circumference of the imprints, while the normal cells do not. In addition, our results indicated that normal cells involve cell-substrate interaction mechanisms that are different from those for cancer cells.

  10. First characterization of the ultra-shielded chamber in the low-noise underground laboratory (LSBB) of Rustrel-Pays d'Apt

    Science.gov (United States)

    Waysand, G.; Bloyet, D.; Bongiraud, J. P.; Collar, J. I.; Dolabdjian, C.; Le Thiec, P.

    2000-04-01

    In compliance with international agreements on nuclear weapons limitation, the French ground-based nuclear arsenal has been decommissioned in its totality. One of its former underground missile control centers, located in Rustrel, 60km east of Avignon (Provence) has been converted into the ``Laboratoire Souterrain à Bas Bruit de Rustrel-Pays d'Apt'' (LSBB). The deepest experimental hall (500m of calcite rock overburden) includes a 100m2 area of sturdy flooring suspended by and resting on shock absorbers, entirely enclosed in a 28m long, 8m diameter, 1cm thick steel capsule. This results in an unparalleled combination of shielding against cosmic rays, acoustic, seismic and electromagnetic noise, which can be exploited for rare event searches using ultra low-temperature and superconducting detectors. The first characterization measurements in this unique civilian site are reported.

  11. Vaporization of mercury from molten lead droplets doped with mercury: Pb/Hg source term experiment for the APT/SILC target

    International Nuclear Information System (INIS)

    Tutu, N.K.; Greene, G.A.

    1994-09-01

    Experiments were performed to measure the fraction of mercury inventory released when droplets of molten lead, doped with a known concentration of mercury, fall through a controlled environment. The temperature of molten droplets ranged from 335 C to 346 C, and the concentration of mercury in the droplets ranged from 0.2 mass % to 1.0 mass %. The environment consisted of an air stream, at a temperature nominally equal to the melt temperature, and moving vertically upwards at a velocity of 10 cm/s. Direct observations and chemical analysis showed that no mercury was released from the molten droplets. Based upon the experimental results, it is concluded that no mercury vapor is likely to be released from the potentially molten source rod material in the APT-SILC Neutron Source Array to the confinement atmosphere during a postulated Large Break Loss Of Coolant Accident scenario leading to the melting of a fraction of the source rods

  12. Topical report on a preconceptual design for the Spallation-Induced Lithium Conversion (SILC) target for the accelerator production of tritium (APT)

    Energy Technology Data Exchange (ETDEWEB)

    Van Tuyle, G.J.; Cokinos, D.M.; Czajkowski, C.; Franz, E.M.; Kroeger, P.; Todosow, M.; Youngblood, R.; Zucker, M.

    1993-09-30

    The preconceptual design of the APT Li-Al target system, also referred to as the Spallation-Induced Lithium Conversion (SILC), target system, is summarized in this report. The system has been designed to produce a ``3/8 Goal`` quantity of tritium using the 200-mA, 1.0 GeV proton beam emerging from the LANL-designed LINAC. The SILC target system consists of a beam expander, a heavy-water-cooled lead spallation neutron source assembly surrounded by light-water-cooled Li-Al blankets, a target window, heat removal systems, and related safety systems. The preconceptual design of each of these major components is described. Descriptions are also provided for the target fabrication, tritium extraction, and waste-steam processes. Performance characteristics are presented and discussed.

  13. First Characterization of the Ultra-Shielded Chamber in the Low-noise Underground Laboratory (LSBB) of Rustrel Pays d'Apt

    CERN Document Server

    Waysand, G; Bongiraud, J P; Collar, J I; Dolabdjian, C; Le Thiec, P; Thiec, Ph. Le

    2000-01-01

    In compliance with international agreements on nuclear weapons limitation, the French ground-based nuclear arsenal has been decommissioned in its totality. One of its former underground missile control centers, located in Rustrel, 60 km east of Avignon (Provence) has been converted into the ``Laboratoire Souterrain à Bas Bruit de Rustrel-Pays d'Apt'' (LSBB). The deepest experimental hall (500 m of calcite rock overburden) includes a 100 m$^{2}$ area of sturdy flooring suspended by and resting on shock absorbers, entirely enclosed in a 28 m-long, 8 m-diameter, 1 cm-thick steel Faraday cage. This results in an unparalleled combination of shielding against cosmic rays, acoustic, seismic and electromagnetic noise, which can be exploited for rare event searches using ultra low-temperature and superconducting detectors. The first characterization measurements in this unique civilian site are reported. http://www.gps.jussieu.fr/RUSTREL/rustrel.html

  14. Functionalization of Fe3O4 NPs by Silanization: Use of Amine (APTES and Thiol (MPTMS Silanes and Their Physical Characterization

    Directory of Open Access Journals (Sweden)

    Silvia Villa

    2016-10-01

    Full Text Available In this paper the results concerning the synthesis of magnetite (Fe3O4 nanoparticles (NPs, their functionalization using silane derivatives, such as (3-Aminopropyltriethoxysilane (APTES and (3-mercaptopropyltrimethoxysilane (MPTMS, and their exhaustive morphological and physical characterization by field emission scanning electron microscopy (FE-SEM with energy dispersion X-ray spectrometer (EDX analysis, AC magnetic susceptibility, UV-VIS and IR spectroscopy, and thermogravimetric (TGA analyses are reported. Two different paths were adopted to achieve the desired functionalization: (1 the direct reaction between the functionalized organo-silane molecule and the surface of the magnetite nanoparticle; and (2 the use of an intermediate silica coating. Finally, the occurrence of both the functionalization with amino and thiol groups has been demonstrated by the reaction with ninhydrin and the capture of Au NPs, respectively.

  15. Sonochemical synthesis, structure and magnetic properties of air-stable Fe3O4/Au nanoparticles

    International Nuclear Information System (INIS)

    Wu Wei; He Quanguo; Chen Hong; Tang Jianxin; Nie Libo

    2007-01-01

    Air-stable nanoparticles of Fe 3 O 4 /Au were prepared via sonolysis of a solution mixture of hydrogen tetrachloroaureate(III) trihydrate (HAuCl 4 ) and (3-aminopropyl)triethoxysilane (APTES)-coated Fe 3 O 4 nanoparticles with further drop-addition of sodium citrate. The Fe 3 O 4 /Au nanoparticles were characterized by x-ray powder diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS) and superconducting quantum interference device (SQUID) magnetometry. Nanoparticles of Fe 3 O 4 /Au obtained under appropriate conditions possess a very high saturation magnetization of about 63 emu g -1 and their average diameter is about 30 nm

  16. Marginally Stable Nuclear Burning

    Science.gov (United States)

    Strohmayer, Tod E.; Altamirano, D.

    2012-01-01

    Thermonuclear X-ray bursts result from unstable nuclear burning of the material accreted on neutron stars in some low mass X-ray binaries (LMXBs). Theory predicts that close to the boundary of stability oscillatory burning can occur. This marginally stable regime has so far been identified in only a small number of sources. We present Rossi X-ray Timing Explorer (RXTE) observations of the bursting, high- inclination LMXB 4U 1323-619 that reveal for the first time in this source the signature of marginally stable burning. The source was observed during two successive RXTE orbits for approximately 5 ksec beginning at 10:14:01 UTC on March 28, 2011. Significant mHz quasi- periodic oscillations (QPO) at a frequency of 8.1 mHz are detected for approximately 1600 s from the beginning of the observation until the occurrence of a thermonuclear X-ray burst at 10:42:22 UTC. The mHz oscillations are not detected following the X-ray burst. The average fractional rms amplitude of the mHz QPOs is 6.4% (3 - 20 keV), and the amplitude increases to about 8% below 10 keV.This phenomenology is strikingly similar to that seen in the LMXB 4U 1636-53. Indeed, the frequency of the mHz QPOs in 4U 1323-619 prior to the X-ray burst is very similar to the transition frequency between mHz QPO and bursts found in 4U 1636-53 by Altamirano et al. (2008). These results strongly suggest that the observed QPOs in 4U 1323-619 are, like those in 4U 1636-53, due to marginally stable nuclear burning. We also explore the dependence of the energy spectrum on the oscillation phase, and we place the present observations within the context of the spectral evolution of the accretion-powered flux from the source.

  17. Study on usability of Fusarium oxysporum Schlecht.f.sp. tulipae Apt. metabolites for screening for basal rot resistance in tulip

    Directory of Open Access Journals (Sweden)

    Małgorzata Podwyszyńska

    2013-12-01

    Full Text Available The usefulness of fungus culture filtrates and fusaric acid as selecting agents for Fusarium resistance breeding in tulip was examined on in vitro cultures of shoots and embryonic calli of seven tulip genotypes differing in resistance to Fusarium oxysporum Schlecht. f. sp. tulipae Apt. (F.o.t. and four virulent F.o.t. isolates. Fusaric acid influenced the shoot growth of all cultivars tested in a similar way, irrespectively of their greenhouse resistance to basal rot. Also, the sensitivity of calli of the cultivars studied to fusaric acid did not correspond with their resistance to F.o.t. evaluated in the greenhouse screening. The phytotoxity of F.o.t. culture filtrates did not depend on their fusaric acid contents. There was a negative correlation between cultivar's resistance to F.o.t in greenhouse tests and the sensitivity of their shoots to fungus culture filtrates in in vitro tests. This indicates that defence mechanism against F.o.t. in tulip tissue may have a nature of hypersensitive response. Considering the results of our study, it may be concluded that the use of fusaric acid or fungus culture filtrates for the in vitro selection of somaclones resistant to F.o.t. in tulip is not feasible.

  18. Dynamical attraction to stable processes

    OpenAIRE

    Fisher, Albert M.; Talet, Marina

    2012-01-01

    We apply dynamical ideas within probability theory, proving an almost-sure invariance principle in log density for stable processes. The familiar scaling property (self-similarity) of the stable process has a stronger expression, that the scaling flow on Skorokhod path space is a Bernoulli flow. We prove that typical paths of a random walk with i.i.d. increments in the domain of attraction of a stable law can be paired with paths of a stable process so that, after applying a non-random regula...

  19. Shelf-Stable Food Safety

    Science.gov (United States)

    ... is an MRE? Is an MRE shelf stable? What foods are packaged in retort packages? What is aseptic ... type of package is used for aseptic processing? What foods are packaged in aseptic packages? Can I microwave ...

  20. Pharmaceuticals labelled with stable isotopes

    International Nuclear Information System (INIS)

    Krumbiegel, P.

    1986-11-01

    The relatively new field of pharmaceuticals labelled with stable isotopes is reviewed. Scientific, juridical, and ethical questions are discussed concerning the application of these pharmaceuticals in human medicine. 13 C, 15 N, and 2 H are the stable isotopes mainly utilized in metabolic function tests. Methodical contributions are given to the application of 2 H, 13 C, and 15 N pharmaceuticals showing new aspects and different states of development in the field under discussion. (author)

  1. Stable isotope research pool inventory

    International Nuclear Information System (INIS)

    1984-03-01

    This report contains a listing of electromagnetically separated stable isotopes which are available at the Oak Ridge National Laboratory for distribution for nondestructive research use on a loan basis. This inventory includes all samples of stable isotopes in the Research Materials Collection and does not designate whether a sample is out on loan or is in reprocessing. For some of the high abundance naturally occurring isotopes, larger amounts can be made available; for example, Ca-40 and Fe-56

  2. Stable Boundary Layer Education (STABLE) Final Campaign Summary

    Energy Technology Data Exchange (ETDEWEB)

    Turner, David D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    The properties of, and the processes that occur in, the nocturnal stable boundary layer are not well understood, making it difficult to represent adequately in numerical models. The nocturnal boundary layer often is characterized by a temperature inversion and, in the Southern Great Plains region, a low-level jet. To advance our understanding of the nocturnal stable boundary layer, high temporal and vertical resolution data on the temperature and wind properties are needed, along with both large-eddy simulation and cloud-resolving modeling.

  3. The Characteristics of Fibres within Coppiced and Non-Coppiced Rosewood (Pterocarpus erinaceus Poir. and their Aptness for Wood - and Paper - Based Products

    Directory of Open Access Journals (Sweden)

    Frederick ANTHONIO

    2017-06-01

    Full Text Available Rosewood (Pterocarpus erinaceus is highly priced for furniture, flooring and cabinetry for its rich hue and durability. Its coppiced wood augments the timber for regular supply and sustainable utilization. Fibre morphology from macerated slivers within its coppiced and non-coppiced stems and their utilization potential were assessed. Derived ratios for the fibres were also calculated. The axial positions (butt, middle, crown affected the fibre dimensions. Fibre length was greater for coppiced trees [i.e., 1663±11, 1488±5, 1511±10µm (for sapwood and 1498±10, 1486±9, 1394±4µm (for heartwood] than the non-coppiced [i.e., 1240±7, 1013±5, 1137±5µm (sapwood and 1094±8, 1002±2, 1041±9µm (heartwood]. In all, those for sapwoods were greater than heartwoods’. Significant differences (P˂0.05 existed between fibre lengths from the coppiced (1394±4-1663±11µm and non-coppiced trees (1002±2-1240±7µm. Fibre diameters for coppiced sapwood and heartwood were 23±1, 20±1, 22±0.8µm and 21.5±0.3, 20.7±0.5, 21.3±2µm and noncoppiced recorded 21±0.6, 20.7±0.3, 20.6±0.1µm and 21±0, 21±0.4, 21±0.8µm respectively. Their respective double wall thicknesses were 8.4±0.2, 7.2±0.2, 9.4±1µm and 8.2±0.2, 9±0.3, 9.1±0.4µm for coppiced wood, and 9.1±1, 7.8±0.1, 8.1±0.3µm and 8.5±0.3, 8±0.4, 8±1 for non-coppiced. Thus, radial stem position also influenced fibre morphology. The fibre indices [i.e., Runkel Ratio, Slenderness Ratio and Flexibility Coefficient for coppiced wood (0.6±0.06-0.85±0.06, 68±4-77±6, 56±4-64±2 respectively and non-coppiced (0.64±0.12-0.8±0, 49±1-58±4, 57±3-62±2 respectively] indicate the timber’s aptness for pulp and paper. Besides, the Wood Industry could exploit the fibre characteristics of coppiced wood also for engineering of fibre-based products and structural applications.

  4. Radiation-stable polyolefin compositions

    International Nuclear Information System (INIS)

    Rekers, J.W.

    1986-01-01

    This invention relates to compositions of olefinic polymers suitable for high energy radiation treatment. In particular, the invention relates to olefinic polymer compositions that are stable to sterilizing dosages of high energy radiation such as a gamma radiation. Stabilizers are described that include benzhydrol and benzhydrol derivatives; these stabilizers may be used alone or in combination with secondary antioxidants or synergists

  5. Monitoring of stable glaucoma patients

    NARCIS (Netherlands)

    K.M. Holtzer-Goor (Kim); N.S. Klazinga (Niek); M.A. Koopmanschap (Marc); H.G. Lemij (Hans); T. Plochg; E. van Sprundel (Esther)

    2010-01-01

    textabstractA high workload for ophthalmologists and long waiting lists for patients challenge the organization of ophthalmic care. Tasks that require less specialized skills, like the monitoring of stable (well controlled) glaucoma patients could be substituted from ophthalmologists to other

  6. Toward Practical Secure Stable Matching

    Directory of Open Access Journals (Sweden)

    Riazi M. Sadegh

    2017-01-01

    Full Text Available The Stable Matching (SM algorithm has been deployed in many real-world scenarios including the National Residency Matching Program (NRMP and financial applications such as matching of suppliers and consumers in capital markets. Since these applications typically involve highly sensitive information such as the underlying preference lists, their current implementations rely on trusted third parties. This paper introduces the first provably secure and scalable implementation of SM based on Yao’s garbled circuit protocol and Oblivious RAM (ORAM. Our scheme can securely compute a stable match for 8k pairs four orders of magnitude faster than the previously best known method. We achieve this by introducing a compact and efficient sub-linear size circuit. We even further decrease the computation cost by three orders of magnitude by proposing a novel technique to avoid unnecessary iterations in the SM algorithm. We evaluate our implementation for several problem sizes and plan to publish it as open-source.

  7. Towards stable acceleration in LINACS

    CERN Document Server

    Dubrovskiy, A D

    2014-01-01

    Ultra-stable and -reproducible high-energy particle beams with short bunches are needed in novel linear accelerators and, in particular, in the Compact Linear Collider CLIC. A passive beam phase stabilization system based on a bunch compression with a negative transfer matrix element R56 and acceleration at a positive off-crest phase is proposed. The motivation and expected advantages of the proposed scheme are outlined.

  8. Stable Hemiaminals: 2-Aminopyrimidine Derivatives

    Directory of Open Access Journals (Sweden)

    Anna Kwiecień

    2015-08-01

    Full Text Available Stable hemiaminals can be obtained in the one-pot reaction between 2-aminopyrimidine and nitrobenzaldehyde derivatives. Ten new hemiaminals have been obtained, six of them in crystal state. The molecular stability of these intermediates results from the presence of both electron-withdrawing nitro groups as substituents on the phenyl ring and pyrimidine ring, so no further stabilisation by intramolecular interaction is required. Hemiaminal molecules possess a tetrahedral carbon atom constituting a stereogenic centre. As the result of crystallisation in centrosymmetric space groups both enantiomers are present in the crystal structure.

  9. Organic synthesis with stable isotopes

    International Nuclear Information System (INIS)

    Daub, G.H.; Kerr, V.N.; Williams, D.L.; Whaley, T.W.

    1978-01-01

    Some general considerations concerning organic synthesis with stable isotopes are presented. Illustrative examples are described and discussed. The examples include DL-2-amino-3-methyl- 13 C-butanoic-3,4- 13 C 2 acid (DL-valine- 13 C 3 ); methyl oleate-1- 13 C; thymine-2,6- 13 C 2 ; 2-aminoethanesulfonic- 13 C acid (taurine- 13 C); D-glucose-6- 13 C; DL-2-amino-3-methylpentanoic-3,4- 13 C 2 acid (DL-isoleucine- 13 C 2 ); benzidine- 15 N 2 ; and 4-ethylsulfonyl-1-naphthalene-sulfonamide- 15 N

  10. Stable agents for imaging investigations

    International Nuclear Information System (INIS)

    Tofe, A.J.

    1976-01-01

    This invention concerns highly stable compounds useful in preparing technetium 99m based scintiscanning exploration agents. The compounds of this invention include a pertechnetate reducing agent or a solution of oxidized pertechnetate and an efficient proportion, sufficient to stabilize the compounds in the presence of oxygen and of radiolysis products, of ascorbic acid or a pharmaceutically acceptable salt or ester of this acid. The invention also concerns a perfected process for preparing a technetium based exploration agent, consisting in codissolving the ascorbic acid or a pharmaceutically acceptable salt or ester of such an acid and a pertechnetate reducing agent in a solution of oxidized pertechnetate [fr

  11. Stable cosmology in chameleon bigravity

    Science.gov (United States)

    De Felice, Antonio; Mukohyama, Shinji; Oliosi, Michele; Watanabe, Yota

    2018-02-01

    The recently proposed chameleonic extension of bigravity theory, by including a scalar field dependence in the graviton potential, avoids several fine-tunings found to be necessary in usual massive bigravity. In particular it ensures that the Higuchi bound is satisfied at all scales, that no Vainshtein mechanism is needed to satisfy Solar System experiments, and that the strong coupling scale is always above the scale of cosmological interest all the way up to the early Universe. This paper extends the previous work by presenting a stable example of cosmology in the chameleon bigravity model. We find a set of initial conditions and parameters such that the derived stability conditions on general flat Friedmann background are satisfied at all times. The evolution goes through radiation-dominated, matter-dominated, and de Sitter eras. We argue that the parameter space allowing for such a stable evolution may be large enough to encompass an observationally viable evolution. We also argue that our model satisfies all known constraints due to gravitational wave observations so far and thus can be considered as a unique testing ground of gravitational wave phenomenologies in bimetric theories of gravity.

  12. Stable isotope mass spectrometry in petroleum exploration

    International Nuclear Information System (INIS)

    Mathur, Manju

    1997-01-01

    The stable isotope mass spectrometry plays an important role to evaluate the stable isotopic composition of hydrocarbons. The isotopic ratios of certain elements in petroleum samples reflect certain characteristics which are useful for petroleum exploration

  13. Self-assembly of natural light-harvesting bacteriochlorophylls of green sulfur photosynthetic bacteria in silicate capsules as stable models of chlorosomes.

    Science.gov (United States)

    Saga, Yoshitaka; Akai, Sho; Miyatake, Tomohiro; Tamiaki, Hitoshi

    2006-01-01

    Naturally occurring bacteriochlorophyll(BChl)s-c, -d, and -e from green sulfur photosynthetic bacteria were self-assembled in an aqueous solution in the presence of octadecyltriethoxysilane and tetraethoxysilane, followed by polycondensation of the alkoxysilanes by incubation for 50 h at 25 degrees C. The resulting BChl self-assemblies in silicate capsules exhibited visible absorption and circular dichroism spectra similar to the corresponding natural light-harvesting systems (chlorosomes) of green sulfur bacteria. Dynamic light scattering measurements indicated that the silicate capsules had an average hydrodynamic diameter of several hundred nanometers. BChl self-aggregates in silicate capsules were significantly stable to a nonionic surfactant Triton X-100, which was apt to decompose the BChl aggregates to their monomeric form, compared with conventional micelle systems. BChls in silicate capsules were more tolerant to demetalation of the central magnesium under acidic conditions than the natural systems.

  14. Stable rotating dipole solitons in nonlocal media

    DEFF Research Database (Denmark)

    Lopez-Aguayo, Servando; Skupin, Stefan; Desyatnikov, Anton S.

    2006-01-01

    We present the first example of stable rotating two-soliton bound states in nonlinear optical media with nonlocal response. We show that, in contrast to media with local response, nonlocality opens possibilities to generate stable azimuthons.......We present the first example of stable rotating two-soliton bound states in nonlinear optical media with nonlocal response. We show that, in contrast to media with local response, nonlocality opens possibilities to generate stable azimuthons....

  15. Uses of stable isotopes in fish ecology

    Science.gov (United States)

    Analyses of fish tissues (other than otoliths) for stable isotope ratios can provide substantial information on fish ecology, including physiological ecology. Stable isotopes of nitrogen and carbon frequently are used to determine the mix of diet sources for consumers. Stable i...

  16. Periodicity of the stable isotopes

    CERN Document Server

    Boeyens, J C A

    2003-01-01

    It is demonstrated that all stable (non-radioactive) isotopes are formally interrelated as the products of systematically adding alpha particles to four elementary units. The region of stability against radioactive decay is shown to obey a general trend based on number theory and contains the periodic law of the elements as a special case. This general law restricts the number of what may be considered as natural elements to 100 and is based on a proton:neutron ratio that matches the golden ratio, characteristic of biological and crystal growth structures. Different forms of the periodic table inferred at other proton:neutron ratios indicate that the electronic configuration of atoms is variable and may be a function of environmental pressure. Cosmic consequences of this postulate are examined. (author)

  17. Stable States of Biological Organisms

    Science.gov (United States)

    Yukalov, V. I.; Sornette, D.; Yukalova, E. P.; Henry, J.-Y.; Cobb, J. P.

    2009-04-01

    A novel model of biological organisms is advanced, treating an organism as a self-consistent system subject to a pathogen flux. The principal novelty of the model is that it describes not some parts, but a biological organism as a whole. The organism is modeled by a five-dimensional dynamical system. The organism homeostasis is described by the evolution equations for five interacting components: healthy cells, ill cells, innate immune cells, specific immune cells, and pathogens. The stability analysis demonstrates that, in a wide domain of the parameter space, the system exhibits robust structural stability. There always exist four stable stationary solutions characterizing four qualitatively differing states of the organism: alive state, boundary state, critical state, and dead state.

  18. Theory of stable allocations II

    Directory of Open Access Journals (Sweden)

    Pantelić Svetlana

    2015-01-01

    Full Text Available The Swedish Royal Academy awarded the 2012 Nobel Prize in Economics to Lloyd Shapley and Alvin Roth, for the theory of stable allocations and the practice of market design. These two American researchers worked independently from each other, combining basic theory and empirical investigations. Through their experiments and practical design they generated a flourishing field of research and improved the performance of many markets. Shapley provided the fundamental theoretical contribution to this field of research, whereas Roth, a professor at the Harvard University in Boston, developed and upgraded these theoretical investigations by applying them to the American market of medical doctors. Namely, their research helps explain the market processes at work, for instance, when doctors are assigned to hospitals, students to schools and human organs for transplant to recipients.

  19. Stable massive particles at colliders

    Energy Technology Data Exchange (ETDEWEB)

    Fairbairn, M.; /Stockholm U.; Kraan, A.C.; /Pennsylvania U.; Milstead, D.A.; /Stockholm U.; Sjostrand, T.; /Lund U.; Skands, P.; /Fermilab; Sloan, T.; /Lancaster U.

    2006-11-01

    We review the theoretical motivations and experimental status of searches for stable massive particles (SMPs) which could be sufficiently long-lived as to be directly detected at collider experiments. The discovery of such particles would address a number of important questions in modern physics including the origin and composition of dark matter in the universe and the unification of the fundamental forces. This review describes the techniques used in SMP-searches at collider experiments and the limits so far obtained on the production of SMPs which possess various colour, electric and magnetic charge quantum numbers. We also describe theoretical scenarios which predict SMPs, the phenomenology needed to model their production at colliders and interactions with matter. In addition, the interplay between collider searches and open questions in cosmology such as dark matter composition are addressed.

  20. Stable Treemaps via Local Moves.

    Science.gov (United States)

    Sondag, Max; Speckmann, Bettina; Verbeek, Kevin

    2018-01-01

    Treemaps are a popular tool to visualize hierarchical data: items are represented by nested rectangles and the area of each rectangle corresponds to the data being visualized for this item. The visual quality of a treemap is commonly measured via the aspect ratio of the rectangles. If the data changes, then a second important quality criterion is the stability of the treemap: how much does the treemap change as the data changes. We present a novel stable treemapping algorithm that has very high visual quality. Whereas existing treemapping algorithms generally recompute the treemap every time the input changes, our algorithm changes the layout of the treemap using only local modifications. This approach not only gives us direct control over stability, but it also allows us to use a larger set of possible layouts, thus provably resulting in treemaps of higher visual quality compared to existing algorithms. We further prove that we can reach all possible treemap layouts using only our local modifications. Furthermore, we introduce a new measure for stability that better captures the relative positions of rectangles. We finally show via experiments on real-world data that our algorithm outperforms existing treemapping algorithms also in practice on either visual quality and/or stability. Our algorithm scores high on stability regardless of whether we use an existing stability measure or our new measure.

  1. Advanced thermally stable jet fuels

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.

    1999-01-31

    The Pennsylvania State University program in advanced thermally stable coal-based jet fuels has five broad objectives: (1) Development of mechanisms of degradation and solids formation; (2) Quantitative measurement of growth of sub-micrometer and micrometer-sized particles suspended in fuels during thermal stressing; (3) Characterization of carbonaceous deposits by various instrumental and microscopic methods; (4) Elucidation of the role of additives in retarding the formation of carbonaceous solids; (5) Assessment of the potential of production of high yields of cycloalkanes by direct liquefaction of coal. Future high-Mach aircraft will place severe thermal demands on jet fuels, requiring the development of novel, hybrid fuel mixtures capable of withstanding temperatures in the range of 400--500 C. In the new aircraft, jet fuel will serve as both an energy source and a heat sink for cooling the airframe, engine, and system components. The ultimate development of such advanced fuels requires a thorough understanding of the thermal decomposition behavior of jet fuels under supercritical conditions. Considering that jet fuels consist of hundreds of compounds, this task must begin with a study of the thermal degradation behavior of select model compounds under supercritical conditions. The research performed by The Pennsylvania State University was focused on five major tasks that reflect the objectives stated above: Task 1: Investigation of the Quantitative Degradation of Fuels; Task 2: Investigation of Incipient Deposition; Task 3: Characterization of Solid Gums, Sediments, and Carbonaceous Deposits; Task 4: Coal-Based Fuel Stabilization Studies; and Task 5: Exploratory Studies on the Direct Conversion of Coal to High Quality Jet Fuels. The major findings of each of these tasks are presented in this executive summary. A description of the sub-tasks performed under each of these tasks and the findings of those studies are provided in the remainder of this volume

  2. Population Games, Stable Games, and Passivity

    Directory of Open Access Journals (Sweden)

    Michael J. Fox

    2013-10-01

    Full Text Available The class of “stable games”, introduced by Hofbauer and Sandholm in 2009, has the attractive property of admitting global convergence to equilibria under many evolutionary dynamics. We show that stable games can be identified as a special case of the feedback-system-theoretic notion of a “passive” dynamical system. Motivated by this observation, we develop a notion of passivity for evolutionary dynamics that complements the definition of the class of stable games. Since interconnections of passive dynamical systems exhibit stable behavior, we can make conclusions about passive evolutionary dynamics coupled with stable games. We show how established evolutionary dynamics qualify as passive dynamical systems. Moreover, we exploit the flexibility of the definition of passive dynamical systems to analyze generalizations of stable games and evolutionary dynamics that include forecasting heuristics as well as certain games with memory.

  3. Gas phase thermal diffusion of stable isotopes

    International Nuclear Information System (INIS)

    Eck, C.F.

    1979-01-01

    The separation of stable isotopes at Mound Facility is reviewed from a historical perspective. The historical development of thermal diffusion from a laboratory process to a separation facility that handles all the noble gases is described. In addition, elementary thermal diffusion theory and elementary cascade theory are presented along with a brief review of the uses of stable isotopes

  4. physico-chemical and stable isotopes

    African Journals Online (AJOL)

    This paper details the mineralogical, chemical and stable isotope abundances of calcrete in the Letlhakeng fossil valley. The stable isotope abundances (O and C) of calcretes yielded some values which were tested against the nature of the calcretes – pedogenic or groundwater type. The Kgalagadi (Kalahari) is a vast ...

  5. Modelling stable atmospheric boundary layers over snow

    NARCIS (Netherlands)

    Sterk, H.A.M.

    2015-01-01

    Thesis entitled:

    Modelling Stable Atmospheric Boundary Layers over Snow

    H.A.M. Sterk

    Wageningen, 29th of April, 2015

    Summary

    The emphasis of this thesis is on the understanding and forecasting of the Stable Boundary Layer (SBL) over snow-covered surfaces. SBLs

  6. Modelling stable atmospheric boundary layers over snow

    NARCIS (Netherlands)

    Sterk, H.A.M.

    2015-01-01

    Thesis entitled: Modelling Stable Atmospheric Boundary Layers over Snow H.A.M. Sterk Wageningen, 29th of April, 2015 Summary The emphasis of this thesis is on the understanding and forecasting of the Stable Boundary Layer (SBL) over snow-covered surfaces. SBLs typically form at night and in polar

  7. Stable isotopes and biomarkers in microbial ecology

    NARCIS (Netherlands)

    Boschker, H.T.S.; Middelburg, J.J.

    2002-01-01

    The use of biomarkers in combination with stable isotope analysis is a new approach in microbial ecology and a number of papers on a variety of subjects have appeared. We will first discuss the techniques for analysing stable isotopes in biomarkers, primarily gas chromatography-combustion-isotope

  8. Stable Agrobacterium -mediated transformation of the halophytic ...

    African Journals Online (AJOL)

    Stable Agrobacterium-mediated transformation of the halophytic Leymus chinensis (Trin.) Yan-Lin Sun, Soon-Kwan Hong. Abstract. In this study, an efficient procedure for stable Agrobacterium-mediated transformation of Leymus chinensis (Trin.) was established. Agrobacterium tumefaciens strain EHA105, harboring a ...

  9. Structure of acid-stable carmine.

    Science.gov (United States)

    Sugimoto, Naoki; Kawasaki, Yoko; Sato, Kyoko; Aoki, Hiromitsu; Ichi, Takahito; Koda, Takatoshi; Yamazaki, Takeshi; Maitani, Tamio

    2002-02-01

    Acid-stable carmine has recently been distributed in the U.S. market because of its good acid stability, but it is not permitted in Japan. We analyzed and determined the structure of the major pigment in acid-stable carmine, in order to establish an analytical method for it. Carminic acid was transformed into a different type of pigment, named acid-stable carmine, through amination when heated in ammonia solution. The features of the structure were clarified using a model compound, purpurin, in which the orientation of hydroxyl groups on the A ring of the anthraquinone skeleton is the same as that of carminic acid. By spectroscopic means and the synthesis of acid-stable carmine and purpurin derivatives, the structure of the major pigment in acid-stable carmine was established as 4-aminocarminic acid, a novel compound.

  10. Stable Fly, (L., Dispersal and Governing Factors

    Directory of Open Access Journals (Sweden)

    Allan T. Showler

    2015-01-01

    Full Text Available Although the movement of stable fly, Stomoxys calcitrans (L., has been studied, its extent and significance has been uncertain. On a local scale (13 km is mainly wind-driven by weather fronts that carry stable flies from inland farm areas for up to 225 km to beaches of northwestern Florida and Lake Superior. Stable flies can reproduce for a short time each year in washed-up sea grass, but the beaches are not conducive to establishment. Such movement is passive and does not appear to be advantageous to stable fly's survival. On a regional scale, stable flies exhibit little genetic differentiation, and on the global scale, while there might be more than one “lineage”, the species is nevertheless considered to be panmictic. Population expansion across much of the globe likely occurred from the late Pleistocene to the early Holocene in association with the spread of domesticated nomad livestock and particularly with more sedentary, penned livestock.

  11. Stable Organic Neutral Diradical via Reversible Coordination.

    Science.gov (United States)

    Lu, Zhenpin; Quanz, Henrik; Burghaus, Olaf; Hofmann, Jonas; Logemann, Christian; Beeck, Sebastian; Schreiner, Peter R; Wegner, Hermann A

    2017-12-27

    We report the formation of a stable neutral diboron diradical simply by coordination of an aromatic dinitrogen compound to an ortho-phenyldiborane. This process is reversible upon addition of pyridine. The diradical species is stable above 200 °C. Computations are consistent with an open-shell triplet diradical with a very small open-shell singlet-triplet energy gap that is indicative of the electronic disjointness of the two radical sites. This opens a new way of generating stable radicals with fascinating electronic properties useful for a large variety of applications.

  12. Stable Isotope Group 1983 progress report

    International Nuclear Information System (INIS)

    Stewart, M.K.

    1984-06-01

    The work of the Stable Isotope Group of the Institute of Nuclear Sciences in the fields of isotope geology, isotope hydrology, geochronology, isotope biology and related fields, and mass spectrometer instrumentation, during 1983, is described

  13. Stable Isotope Group 1982 progress report

    International Nuclear Information System (INIS)

    Stewart, M.K.

    1983-06-01

    The work of the Stable Isotope Group of the Institute of Nuclear Sciences during 1982, in the fields of isotope geology, isotope hydrology, geochronology, isotope biology and mass spectrometer instrumentation, is described

  14. Bartolome Island, Galapagos Stable Oxygen Calibration Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Galapagos Coral Stable Oxygen Calibration Data. Sites: Bartolome Island: 0 deg, 17'S, 90 deg 33' W. Champion Island: 1 deg, 15'S, 90 deg, 05' W. Urvina Bay (Isabela...

  15. Allan Hills Stable Water Isotopes, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set includes stable water isotope values at 10 m resolution along an approximately 5 km transect through the main icefield of the Allan Hills Blue Ice...

  16. Applications of stable isotopes in clinical pharmacology

    Science.gov (United States)

    Schellekens, Reinout C A; Stellaard, Frans; Woerdenbag, Herman J; Frijlink, Henderik W; Kosterink, Jos G W

    2011-01-01

    This review aims to present an overview of the application of stable isotope technology in clinical pharmacology. Three main categories of stable isotope technology can be distinguished in clinical pharmacology. Firstly, it is applied in the assessment of drug pharmacology to determine the pharmacokinetic profile or mode of action of a drug substance. Secondly, stable isotopes may be used for the assessment of drug products or drug delivery systems by determination of parameters such as the bioavailability or the release profile. Thirdly, patients may be assessed in relation to patient-specific drug treatment; this concept is often called personalized medicine. In this article, the application of stable isotope technology in the aforementioned three areas is reviewed, with emphasis on developments over the past 25 years. The applications are illustrated with examples from clinical studies in humans. PMID:21801197

  17. Tannaka duality and stable infinity-categories

    OpenAIRE

    Iwanari, Isamu

    2014-01-01

    We introduce the notion of fine tannakian infinity-categories and prove Tannaka duality results for symmetric monoidal stable infinity-categories over a field of characteristic zero. We also discuss several examples.

  18. On Stable Marriages and Greedy Matchings

    Energy Technology Data Exchange (ETDEWEB)

    Manne, Fredrik; Naim, Md; Lerring, Hakon; Halappanavar, Mahantesh

    2016-12-11

    Research on stable marriage problems has a long and mathematically rigorous history, while that of exploiting greedy matchings in combinatorial scientific computing is a younger and less developed research field. In this paper we consider the relationships between these two areas. In particular we show that several problems related to computing greedy matchings can be formulated as stable marriage problems and as a consequence several recently proposed algorithms for computing greedy matchings are in fact special cases of well known algorithms for the stable marriage problem. However, in terms of implementations and practical scalable solutions on modern hardware, the greedy matching community has made considerable progress. We show that due to the strong relationship between these two fields many of these results are also applicable for solving stable marriage problems.

  19. The Reactivity of Stable Metallacyclobutenes and Vinylcarbenes

    OpenAIRE

    Holland, Ryan Lynn

    2016-01-01

    Chapter 1. Historical Development of Stable Metallacyclobutenes Fred Tebbe and co-workers synthesized the first stable metallacyclobutene complexes in the late 1970’s by treatment of an intermediate titanium methylene species – later popularized as the “Tebbe reagent” – with acetylenes. Robert Grubbs at Caltech further studied this system, using it to detail a degenerate metathesis reaction and to isolate a metallacyclobutane complex – which was implicated in the emerging field of alkene meta...

  20. Stable atomic hydrogen: Polarized atomic beam source

    International Nuclear Information System (INIS)

    Niinikoski, T.O.; Penttilae, S.; Rieubland, J.M.; Rijllart, A.

    1984-01-01

    We have carried out experiments with stable atomic hydrogen with a view to possible applications in polarized targets or polarized atomic beam sources. Recent results from the stabilization apparatus are described. The first stable atomic hydrogen beam source based on the microwave extraction method (which is being tested ) is presented. The effect of the stabilized hydrogen gas density on the properties of the source is discussed. (orig.)

  1. Local Search Approaches in Stable Matching Problems

    Directory of Open Access Journals (Sweden)

    Toby Walsh

    2013-10-01

    Full Text Available The stable marriage (SM problem has a wide variety of practical applications, ranging from matching resident doctors to hospitals, to matching students to schools or, more generally, to any two-sided market. In the classical formulation, n men and n women express their preferences (via a strict total order over the members of the other sex. Solving an SM problem means finding a stable marriage where stability is an envy-free notion: no man and woman who are not married to each other would both prefer each other to their partners or to being single. We consider both the classical stable marriage problem and one of its useful variations (denoted SMTI (Stable Marriage with Ties and Incomplete lists where the men and women express their preferences in the form of an incomplete preference list with ties over a subset of the members of the other sex. Matchings are permitted only with people who appear in these preference lists, and we try to find a stable matching that marries as many people as possible. Whilst the SM problem is polynomial to solve, the SMTI problem is NP-hard. We propose to tackle both problems via a local search approach, which exploits properties of the problems to reduce the size of the neighborhood and to make local moves efficiently. We empirically evaluate our algorithm for SM problems by measuring its runtime behavior and its ability to sample the lattice of all possible stable marriages. We evaluate our algorithm for SMTI problems in terms of both its runtime behavior and its ability to find a maximum cardinality stable marriage. Experimental results suggest that for SM problems, the number of steps of our algorithm grows only as O(n log(n, and that it samples very well the set of all stable marriages. It is thus a fair and efficient approach to generate stable marriages. Furthermore, our approach for SMTI problems is able to solve large problems, quickly returning stable matchings of large and often optimal size, despite the

  2. Technical memorandum: instrumentation for APT and LTPP

    CSIR Research Space (South Africa)

    Steyn, WJvdM

    2006-01-01

    Full Text Available RANGE ENVIRONMENTAL PARAMETERS Temperature air, surface, in-depth x x ± 0.5°C -5°C to 70°C Humidity / Moisture air, surface, in-depth x x ±1% 0% to 100% Rainfall x x ±1 mm NA Wind direction and speed x ±1°; ±1 m/s NA Solar radiation... that is used to convert a parameter (i.e. temperature) into an electric signal. This signal needs to be fed through a combination of signal conditioners into a system where the data can be collected, viewed and stored. The combination of all components...

  3. Accelerator for the production of tritium (APT)

    International Nuclear Information System (INIS)

    Wilson, M.T.; Bhatia, T.S.; Guy, F.W.; Neuschaefer, G.H.; Wangler, T.P.; Young, L.M.

    1989-01-01

    A collaborative study by Los Alamos and Brookhaven National Laboratories, supported by the Westinghouse Hanford Company, investigating a facility to produce tritium for the nation's defense needs indicates that a 1.6-GeV, 250-mA proton accelerator is required. A reference design of this accelerator starts with two parallel 125-keV injectors feeding 350-MHz radio-frequency quadrupoles (RFQ) that funnel at 2.5 MeV into a 700-MHz drift-tube linac (DTL). The DTL injects at 100 MeV into a 1400-MHz side-coupled linac (SCL). The accelerator will cost about $1.2 B and require 746 MW of electricity. 3 refs., 3 tabs

  4. Testing the age calibration of the Newark-Hartford APTS by magnetostratigraphic correlation of U-Pb zircon-dated tuffaceous beds in the Late Traissic Chinle Formation in core PFNP-1A from the Petrified Forest National Park (Arizona, USA)

    Science.gov (United States)

    Kent, D. V.; Olsen, P. E.; Mundil, R.; Lepre, C. J.

    2017-12-01

    The Newark-Hartford APTS extends over 27 Myr according to cycle stratigraphy of the Norian and Rhaetian of the Late Triassic and Hettangian and Sinemurian of the Early Jurassic and an additional 6 Myr by extrapolation into the Carnian; the entire sequence is anchored by U-Pb zircon dating of CAMP activity that provides a calibration date of 201.6 Ma for Chron E23r just below the end-Triassic extinction and the earliest CAMP basalts in the Newark basin (Blackburn+2013 Science; Kent+2017 ESR). The developing APTS has been successfully used for global correlations in marine and non-marine facies but there have been ongoing suggestions that millions of years of Rhaetian time are missing in a cryptic unconformity that supposedly occurs just above E23r in the Newark Supergroup basins. Testing the continuity of the APTS by magnetostratigraphic correlation of U-Pb zircon-dated tuffaceous beds in the Chinle Formation was a prime scientific objective for core PFNP-1A. Paleomagnetic results were obtained using stepwise thermal demagnetization to 680°C from >150 samples of finer-grained red lithologies from the upper 250 m of the cored section of the Chinle (upper Sonsela, Petrified Forest including the Black Forest Bed, and lower Owl Rock Members). Characteristic directions isolated in 2/3 of the samples showed antipodal directions that were shallow with respect to reference directions (flattening factor 0.5), consistent with early acquisition of remanence. Seven polarity magnetozones produce a distinctive pattern correlated to Chrons E17r to E14r of the APTS. The Black Forest Bed at 209.93±0.26 Ma (Ramezani+2011 GSAB), confirmed by our new U-Pb dates from core PFNP-1A, occurs in a reverse polarity magnetozone correlated to E16r (209.95-210.25 Ma), which puts the U-Pb zircon date(s) in excellent agreement with the inferred APTS age. Rather than a 'missing Rhaetian', the apparent regional differences in appearances and disappearances of palynoflora, conchostracans, and other

  5. Stable chaos in fluctuation driven neural circuits

    International Nuclear Information System (INIS)

    Angulo-Garcia, David; Torcini, Alessandro

    2014-01-01

    Highlights: • Nonlinear instabilities in fluctuation driven (balanced) neural circuits are studied. • Balanced networks display chaos and stable phases at different post-synaptic widths. • Linear instabilities coexists with nonlinear ones in the chaotic regime. • Erratic motion appears also in linearly stable phase due to stable chaos. - Abstract: We study the dynamical stability of pulse coupled networks of leaky integrate-and-fire neurons against infinitesimal and finite perturbations. In particular, we compare mean versus fluctuations driven networks, the former (latter) is realized by considering purely excitatory (inhibitory) sparse neural circuits. In the excitatory case the instabilities of the system can be completely captured by an usual linear stability (Lyapunov) analysis, whereas the inhibitory networks can display the coexistence of linear and nonlinear instabilities. The nonlinear effects are associated to finite amplitude instabilities, which have been characterized in terms of suitable indicators. For inhibitory coupling one observes a transition from chaotic to non chaotic dynamics by decreasing the pulse-width. For sufficiently fast synapses the system, despite showing an erratic evolution, is linearly stable, thus representing a prototypical example of stable chaos

  6. Metabolic studies in man using stable isotopes

    International Nuclear Information System (INIS)

    Faust, H.; Jung, K.; Krumbiegel, P.

    1993-01-01

    In this project, stable isotope compounds and stable isotope pharmaceuticals were used (with emphasis on the application of 15 N) to study several aspects of nitrogen metabolism in man. Of the many methods available, the 15 N stable isotope tracer technique holds a special position because the methodology for application and nitrogen isotope analysis is proven and reliable. Valid routine methods using 15 N analysis by emission spectrometry have been demonstrated. Several methods for the preparation of biological material were developed during our participation in the Coordinated Research Programme. In these studies, direct procedures (i.e. use of diluted urine as a samples without chemical preparation) or rapid isolation methods were favoured. Within the scope of the Analytical Quality Control Service (AQCS) enriched stable isotope reference materials for medical and biological studies were prepared and are now available through the International Atomic Energy Agency. The materials are of special importance as the increasing application of stable isotopes as tracers in medical, biological and agricultural studies has focused interest on reliable measurements of biological material of different origin. 24 refs

  7. Temperature and Humidity Control in Livestock Stables

    DEFF Research Database (Denmark)

    Hansen, Michael; Andersen, Palle; Nielsen, Kirsten M.

    2010-01-01

    The paper describes temperature and humidity control of a livestock stable. It is important to have a correct air flow pattern in the livestock stable in order to achieve proper temperature and humidity control as well as to avoid draught. In the investigated livestock stable the air flow...... is controlled using wall mounted ventilation flaps. In the paper an algorithm for air flow control is presented meeting the needs for temperature and humidity while taking the air flow pattern in consideration. To obtain simple and realisable controllers a model based control design method is applied....... In the design dynamic models for temperature and humidity are very important elements and effort is put into deriving and testing the models. It turns out that non-linearities are dominating in both models making feedback linearization the natural design method. The air controller as well as the temperature...

  8. On some topological properties of stable measures

    DEFF Research Database (Denmark)

    Nielsen, Carsten Krabbe

    1996-01-01

    Summary The paper shows that the set of stable probability measures and the set of Rational Beliefs relative to a given stationary measure are closed in the strong topology, but not closed in the topology of weak convergence. However, subsets of the set of stable probability measures which...... are characterized by uniformity of convergence of the empirical distribution are closed in the topology of weak convergence. It is demonstrated that such subsets exist. In particular, there is an increasing sequence of sets of SIDS measures who's union is the set of all SIDS measures generated by a particular...... system and such that each subset consists of stable measures. The uniformity requirement has a natural interpretation in terms of plausibility of Rational Beliefs...

  9. Concentration of stable elements in food products

    Energy Technology Data Exchange (ETDEWEB)

    Montford, M.A.; Shank, K.E.; Hendricks, C.; Oakes, T.W.

    1980-01-01

    Food samples were taken from commercial markets and analyzed for stable element content. The concentrations of most stable elements (Ag, Al, As, Au, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hf, I, K, La, Mg, Mn, Mo, Na, Rb, Sb, Sc, Se, Sr, Ta, Th, Ti, V, Zn, Zr) were determined using multiple-element neutron activation analysis, while the concentrations of other elements (Cd, Hg, Ni, Pb) were determined using atomic absorption. The relevance of the concentrations found are noted in relation to other literature values. An earlier study was extended to include the determination of the concentration of stable elements in home-grown products in the vicinity of the Oak Ridge National Laboratory. Comparisons between the commercial and local food-stuff values are discussed.

  10. Faster and Simpler Approximation of Stable Matchings

    Directory of Open Access Journals (Sweden)

    Katarzyna Paluch

    2014-04-01

    Full Text Available We give a 3 2 -approximation algorithm for finding stable matchings that runs in O(m time. The previous most well-known algorithm, by McDermid, has the same approximation ratio but runs in O(n3/2m time, where n denotes the number of people andm is the total length of the preference lists in a given instance. In addition, the algorithm and the analysis are much simpler. We also give the extension of the algorithm for computing stable many-to-many matchings.

  11. Stable isotopes in Lithuanian bioarcheological material

    Science.gov (United States)

    Skipityte, Raminta; Jankauskas, Rimantas; Remeikis, Vidmantas

    2015-04-01

    Investigation of bioarcheological material of ancient human populations allows us to understand the subsistence behavior associated with various adaptations to the environment. Feeding habits are essential to the survival and growth of ancient populations. Stable isotope analysis is accepted tool in paleodiet (Schutkowski et al, 1999) and paleoenvironmental (Zernitskaya et al, 2014) studies. However, stable isotopes can be useful not only in investigating human feeding habits but also in describing social and cultural structure of the past populations (Le Huray and Schutkowski, 2005). Only few stable isotope investigations have been performed before in Lithuanian region suggesting a quite uniform diet between males and females and protein intake from freshwater fish and animal protein. Previously, stable isotope analysis has only been used to study a Stone Age population however, more recently studies have been conducted on Iron Age and Late medieval samples (Jacobs et al, 2009). Anyway, there was a need for more precise examination. Stable isotope analysis were performed on human bone collagen and apatite samples in this study. Data represented various ages (from 5-7th cent. to 18th cent.). Stable carbon and nitrogen isotope analysis on medieval populations indicated that individuals in studied sites in Lithuania were almost exclusively consuming C3 plants, C3 fed terrestrial animals, and some freshwater resources. Current investigation demonstrated social differences between elites and country people and is promising in paleodietary and daily life reconstruction. Acknowledgement I thank prof. dr. G. Grupe, Director of the Anthropological and Palaeoanatomical State Collection in Munich for providing the opportunity to work in her laboratory. The part of this work was funded by DAAD. Antanaitis-Jacobs, Indre, et al. "Diet in early Lithuanian prehistory and the new stable isotope evidence." Archaeologia Baltica 12 (2009): 12-30. Le Huray, Jonathan D., and Holger

  12. Bordism, stable homotopy and adams spectral sequences

    CERN Document Server

    Kochman, Stanley O

    1996-01-01

    This book is a compilation of lecture notes that were prepared for the graduate course "Adams Spectral Sequences and Stable Homotopy Theory" given at The Fields Institute during the fall of 1995. The aim of this volume is to prepare students with a knowledge of elementary algebraic topology to study recent developments in stable homotopy theory, such as the nilpotence and periodicity theorems. Suitable as a text for an intermediate course in algebraic topology, this book provides a direct exposition of the basic concepts of bordism, characteristic classes, Adams spectral sequences, Brown-Peter

  13. Modelling stable water isotopes: Status and perspectives

    Directory of Open Access Journals (Sweden)

    Werner M.

    2010-12-01

    Full Text Available Modelling of stable water isotopes H2 18O and HDO within various parts of the Earth’s hydrological cycle has clearly improved our understanding of the interplay between climatic variations and related isotope fractionation processes. In this article key principles and major research results of stable water isotope modelling studies are described. Emphasis is put on research work using explicit isotope diagnostics within general circulation models as this highly complex model setup bears many resemblances with studies using simpler isotope modelling approaches.

  14. Stable isotope analysis of dynamic lipidomics.

    Science.gov (United States)

    Brandsma, Joost; Bailey, Andrew P; Koster, Grielof; Gould, Alex P; Postle, Anthony D

    2017-08-01

    Metabolic pathway flux is a fundamental element of biological activity, which can be quantified using a variety of mass spectrometric techniques to monitor incorporation of stable isotope-labelled substrates into metabolic products. This article contrasts developments in electrospray ionisation mass spectrometry (ESI-MS) for the measurement of lipid metabolism with more established gas chromatography mass spectrometry and isotope ratio mass spectrometry methodologies. ESI-MS combined with diagnostic tandem MS/MS scans permits the sensitive and specific analysis of stable isotope-labelled substrates into intact lipid molecular species without the requirement for lipid hydrolysis and derivatisation. Such dynamic lipidomic methodologies using non-toxic stable isotopes can be readily applied to quantify lipid metabolic fluxes in clinical and metabolic studies in vivo. However, a significant current limitation is the absence of appropriate software to generate kinetic models of substrate incorporation into multiple products in the time domain. Finally, we discuss the future potential of stable isotope-mass spectrometry imaging to quantify the location as well as the extent of lipid synthesis. This article is part of a Special Issue entitled: BBALIP_Lipidomics Opinion Articles edited by Sepp Kohlwein. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Petrography, compositional characteristics and stable isotope ...

    African Journals Online (AJOL)

    Petrography, compositional characteristics and stable isotope geochemistry of the Ewekoro formation from Ibese Corehole, eastern Dahomey basin, southwestern Nigeria. ME Nton, MO ... Preserved pore types such as; intercrystaline, moldic and vuggy pores were observed as predominant conduits for fluids. The major ...

  16. petrography, compositional characteristics and stable isotope ...

    African Journals Online (AJOL)

    PROF EKWUEME

    Subsurface samples of the predominantly carbonate Ewekoro Formation, obtained from Ibese core hole within the Dahomey basin were used in this study. Investigations entail petrographic, elemental composition as well as stable isotopes (carbon and oxygen) geochemistry in order to deduce the different microfacies and ...

  17. Substitution of stable isotopes in Chlorella

    Science.gov (United States)

    Flaumenhaft, E.; Katz, J. J.; Uphaus, R. A.

    1969-01-01

    Replacement of biologically important isotopes in the alga Chlorella by corresponding heavier stable isotopes produces increasingly greater deviations from the normal cell size and changes the quality and distribution of certain cellular components. The usefulness of isotopically altered organisms increases interest in the study of such permuted organisms.

  18. Champion Island, Galapagos Stable Oxygen Calibration Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Galapagos Coral Stable Oxygen Calibration Data. Sites: Bartolome Island: 0 deg, 17 min S, 90 deg 33 min W. Champion Island: 1 deg, 15 min S, 90 deg, 05 min W. Urvina...

  19. Stable propagation of 'selfish'genetic elements

    Indian Academy of Sciences (India)

    Unknown

    viruses such as the Epstein-Barr virus (Harris et al 1985;. Kanda et al 2001) and bovine papilloma virus (Lehman and Botchan 1998; Ilves et al 1999), which exist pre- dominantly as extrachromosomal episomes, have been shown to utilize chromosome tethering as a means for stable segregation. The tethering mechanism ...

  20. Unconditionally stable perfectly matched layer boundary conditions

    NARCIS (Netherlands)

    De Raedt, H.; Michielsen, K.

    2007-01-01

    A brief review is given of a systematic, product-formula based approach to construct unconditionally stable algorithms for solving the time-dependent Maxwell equations. The fundamental difficulties that arise when we want to incorporate uniaxial perfectly matched layer boundary conditions into this

  1. Facies, dissolution seams and stable isotope compositions

    Indian Academy of Sciences (India)

    Stable isotope analysis of the limestone shows that 13C and 18O values are compatible with the early Mesoproterozoic open seawater composition. The ribbon limestone facies in the Rohtas Limestone is characterized by micritic beds, each decoupled in a lower band enriched and an upper band depleted in dissolution ...

  2. Connected domination stable graphs upon edge addition ...

    African Journals Online (AJOL)

    A set S of vertices in a graph G is a connected dominating set of G if S dominates G and the subgraph induced by S is connected. We study the graphs for which adding any edge does not change the connected domination number. Keywords: Connected domination, connected domination stable, edge addition ...

  3. Stable magnetic remanence in antiferromagnetic goethite.

    Science.gov (United States)

    Strangway, D W; McMahon, B E; Honea, R M

    1967-11-10

    Goethite, known to be antiferromagnetic, acquires thermoremanent magnetization at its Neel temperature of 120 degrees C. This remanence, extremely stable, is due to the presence of unbalanced spins in the antiferromagnetic structure; the spins may result from grain size, imperfections, or impurities.

  4. Strontium stable isotope behaviour accompanying basalt weathering

    Science.gov (United States)

    Burton, K. W.; Parkinson, I. J.; Gíslason, S. G. R.

    2016-12-01

    The strontium (Sr) stable isotope composition of rivers is strongly controlled by the balance of carbonate to silicate weathering (Krabbenhöft et al. 2010; Pearce et al. 2015). However, rivers draining silicate catchments possess distinctly heavier Sr stable isotope values than their bedrock compositions, pointing to significant fractionation during weathering. Some have argued for preferential release of heavy Sr from primary phases during chemical weathering, others for the formation of secondary weathering minerals that incorporate light isotopes. This study presents high-precision double-spike Sr stable isotope data for soils, rivers, ground waters and estuarine waters from Iceland, reflecting both natural weathering and societal impacts on those environments. The bedrock in Iceland is dominantly basaltic, d88/86Sr ≈ +0.27, extending to lighter values for rhyolites. Geothermal waters range from basaltic Sr stable compositions to those akin to seawater. Soil pore waters reflect a balance of input from primary mineral weathering, precipitation and litter recycling and removal into secondary phases and vegetation. Rivers and ground waters possess a wide range of d88/86Sr compositions from +0.101 to +0.858. Elemental and isotope data indicate that this fractionation primarily results from the formation or dissolution of secondary zeolite (d88/86Sr ≈ +0.10), but also carbonate (d88/86Sr ≈ +0.22) and sometimes anhydrite (d88/86Sr ≈ -0.73), driving the residual waters to heavier or lighter values, respectively. Estuarine waters largely reflect mixing with seawater, but are also be affected by adsorption onto particulates, again driving water to heavy values. Overall, these data indicate that the stability and nature of secondary weathering phases, exerts a strong control on the Sr stable isotope composition of silicate rivers. [1] Krabbenhöft et al. (2010) Geochim. Cosmochim. Acta 74, 4097-4109. [2] Pearce et al. (2015) Geochim. Cosmochim. Acta 157, 125-146.

  5. Development of a Safety Management Web Tool for Horse Stables.

    Science.gov (United States)

    Leppälä, Jarkko; Kolstrup, Christina Lunner; Pinzke, Stefan; Rautiainen, Risto; Saastamoinen, Markku; Särkijärvi, Susanna

    2015-11-12

    Managing a horse stable involves risks, which can have serious consequences for the stable, employees, clients, visitors and horses. Existing industrial or farm production risk management tools are not directly applicable to horse stables and they need to be adapted for use by managers of different types of stables. As a part of the InnoEquine project, an innovative web tool, InnoHorse, was developed to support horse stable managers in business, safety, pasture and manure management. A literature review, empirical horse stable case studies, expert panel workshops and stakeholder interviews were carried out to support the design. The InnoHorse web tool includes a safety section containing a horse stable safety map, stable safety checklists, and examples of good practices in stable safety, horse handling and rescue planning. This new horse stable safety management tool can also help in organizing work processes in horse stables in general.

  6. On The Roman Domination Stable Graphs

    Directory of Open Access Journals (Sweden)

    Hajian Majid

    2017-11-01

    Full Text Available A Roman dominating function (or just RDF on a graph G = (V,E is a function f : V → {0, 1, 2} satisfying the condition that every vertex u for which f(u = 0 is adjacent to at least one vertex v for which f(v = 2. The weight of an RDF f is the value f(V (G = Pu2V (G f(u. The Roman domination number of a graph G, denoted by R(G, is the minimum weight of a Roman dominating function on G. A graph G is Roman domination stable if the Roman domination number of G remains unchanged under removal of any vertex. In this paper we present upper bounds for the Roman domination number in the class of Roman domination stable graphs, improving bounds posed in [V. Samodivkin, Roman domination in graphs: the class RUV R, Discrete Math. Algorithms Appl. 8 (2016 1650049].

  7. Design of optically stable image reflector system.

    Science.gov (United States)

    Tsai, Chung-Yu

    2013-08-01

    The design of a partially optically stable (POS) reflector system, in which the exit ray direction and image pose are unchanged as the reflector system rotates about a specific directional vector, was presented in an earlier study by the current group [Appl. Phys. B100, 883-890 (2010)]. The present study further proposes an optically stable image (OSI) reflector system, in which not only is the optical stability property of the POS system retained, but the image position and total ray path length are also fixed. An analytical method is proposed for the design of OSI reflector systems comprising multiple reflectors. The validity of the proposed approach is demonstrated by means of two illustrative examples.

  8. Stable microfluidic flow focusing using hydrostatics.

    Science.gov (United States)

    Gnyawali, Vaskar; Saremi, Mohammadali; Kolios, Michael C; Tsai, Scott S H

    2017-05-01

    We present a simple technique to generate stable hydrodynamically focused flows by driving the flow with hydrostatic pressure from liquid columns connected to the inlets of a microfluidic device. Importantly, we compare the focused flows generated by hydrostatic pressure and classical syringe pump driven flows and find that the stability of the hydrostatic pressure driven technique is significantly better than the stability achieved via syringe pumps, providing fluctuation-free focused flows that are suitable for sensitive microfluidic flow cytometry applications. We show that the degree of flow focusing with the hydrostatic method can be accurately controlled by the simple tuning of the liquid column heights. We anticipate that this approach to stable flow focusing will find many applications in microfluidic cytometry technologies.

  9. Utilization of stable isotopes in medicine

    International Nuclear Information System (INIS)

    1980-11-01

    The ten lectures given at this round table are presented together with a discussion. Five lectures, relating to studies in which deuterium oxide was employed as a tracer of body water, dealt with pulmonary water measurements in man and animals, the total water pool in adipose subjects, and liquid compartments in children undergoing hemodyalisis. The heavy water is analysed by infrared spectrometry and a new double spectrodoser is described. Two studies using 13 C as tracer, described the diagnosis of liver troubles and diabetes respectively. A general review of the perspectives of the application of stable isotopes in clinical medicine is followed by a comparison of the use of stable and radioactive isotopes in France [fr

  10. Thermally Stable, Latent Olefin Metathesis Catalysts

    OpenAIRE

    Thomas, Renee M.; Fedorov, Alexey; Keitz, Benjamin K.; Grubbs, Robert H.

    2011-01-01

    Highly thermally stable N-aryl,N-alkyl N-heterocyclic carbene (NHC) ruthenium catalysts were designed and synthesized for latent olefin metathesis. These catalysts showed excellent latent behavior toward metathesis reactions, whereby the complexes were inactive at ambient temperature and initiated at elevated temperatures, a challenging property to achieve with second generation catalysts. A sterically hindered N-tert-butyl substituent on the NHC ligand of the ruthenium complex was found to i...

  11. The nature of stable insomnia phenotypes.

    Science.gov (United States)

    Pillai, Vivek; Roth, Thomas; Drake, Christopher L

    2015-01-01

    We examined the 1-y stability of four insomnia symptom profiles: sleep onset insomnia; sleep maintenance insomnia; combined onset and maintenance insomnia; and neither criterion (i.e., insomnia cases that do not meet quantitative thresholds for onset or maintenance problems). Insomnia cases that exhibited the same symptom profile over a 1-y period were considered to be phenotypes, and were compared in terms of clinical and demographic characteristics. Longitudinal. Urban, community-based. Nine hundred fifty-four adults with Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition based current insomnia (46.6 ± 12.6 y; 69.4% female). None. At baseline, participants were divided into four symptom profile groups based on quantitative criteria. Follow-up assessment 1 y later revealed that approximately 60% of participants retained the same symptom profile, and were hence judged to be phenotypes. Stability varied significantly by phenotype, such that sleep onset insomnia (SOI) was the least stable (42%), whereas combined insomnia (CI) was the most stable (69%). Baseline symptom groups (cross-sectionally defined) differed significantly across various clinical indices, including daytime impairment, depression, and anxiety. Importantly, however, a comparison of stable phenotypes (longitudinally defined) did not reveal any differences in impairment or comorbid psychopathology. Another interesting finding was that whereas all other insomnia phenotypes showed evidence of an elevated wake drive both at night and during the day, the 'neither criterion' phenotype did not; this latter phenotype exhibited significantly higher daytime sleepiness despite subthreshold onset and maintenance difficulties. By adopting a stringent, stability-based definition, this study offers timely and important data on the longitudinal trajectory of specific insomnia phenotypes. With the exception of daytime sleepiness, few clinical differences are apparent across stable phenotypes.

  12. A belief-based evolutionarily stable strategy

    OpenAIRE

    Deng, Xinyang; Wang, Zhen; Liu, Qi; Deng, Yong; Mahadevan, Sankaran

    2014-01-01

    As an equilibrium refinement of the Nash equilibrium, evolutionarily stable strategy (ESS) is a key concept in evolutionary game theory and has attracted growing interest. An ESS can be either a pure strategy or a mixed strategy. Even though the randomness is allowed in mixed strategy, the selection probability of pure strategy in a mixed strategy may fluctuate due to the impact of many factors. The fluctuation can lead to more uncertainty. In this paper, such uncertainty involved in mixed st...

  13. Stable iodine prophylaxis. Recommendations of the 2nd UK Working Group on Stable Iodine Prophylaxis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The Working Group reviewed the revised Who guidance and the information published since 1991 on the risks of thyroid cancer in children from radioiodine and the risks of side effects from stable iodine. In particular, it reviewed data compiled on the incidence of thyroid cancers in children following the accident at the Chernobyl nuclear power plant in 1986. It considered whether the NRPB Earls were still appropriate, in the light of the new data. It also reviewed a range of other recommendations given by the 1st Working Group, concerning the chemical form of stable iodine tablets and practical issues concerning implementation of stable iodine prophylaxis. Finally, it reviewed the Patient Information Leaflet that is required, by law, to be included in each box of tablets and provided suggestions for information to be included in a separate information leaflet to be handed out to the public when stable iodine tablets are distributed.

  14. Detonation of Meta-stable Clusters

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, Allen; Kuhl, Allen L.; Fried, Laurence E.; Howard, W. Michael; Seizew, Michael R.; Bell, John B.; Beckner, Vincent; Grcar, Joseph F.

    2008-05-31

    We consider the energy accumulation in meta-stable clusters. This energy can be much larger than the typical chemical bond energy (~;;1 ev/atom). For example, polymeric nitrogen can accumulate 4 ev/atom in the N8 (fcc) structure, while helium can accumulate 9 ev/atom in the excited triplet state He2* . They release their energy by cluster fission: N8 -> 4N2 and He2* -> 2He. We study the locus of states in thermodynamic state space for the detonation of such meta-stable clusters. In particular, the equilibrium isentrope, starting at the Chapman-Jouguet state, and expanding down to 1 atmosphere was calculated with the Cheetah code. Large detonation pressures (3 and 16 Mbar), temperatures (12 and 34 kilo-K) and velocities (20 and 43 km/s) are a consequence of the large heats of detonation (6.6 and 50 kilo-cal/g) for nitrogen and helium clusters respectively. If such meta-stable clusters could be synthesized, they offer the potential for large increases in the energy density of materials.

  15. Modelo de valoración de activos financieros (CAPM) y teoría de valoración por arbitraje (APT): Un test empírico en las empresas del sector eléctrico brasileño

    OpenAIRE

    de Sousa Santana, Fernando; Universidade do Estado de Minas Gerais

    2013-01-01

    El Modelo de Valoración de Activos Financieros(CAPM) y la Teoría de Valoración por Arbitraje (APT)son técnicas de valoración de activos financieros empleadaspara estimar el retorno generado por las inversiones.Con el propósito de evaluar la aplicabilidad de esos modelos,se realizó un estudio empírico para verificar el comportamientode los retornos esperados de las acciones deempresas brasileñas de energía eléctrica. Para tal efecto,los riesgos y los retornos estimados por los modelos fueronco...

  16. Two stable steady states in the Hodgkin-Huxley axons

    OpenAIRE

    Aihara, K.; Matsumoto, G.

    1983-01-01

    Two stable steady states were found in the numerical solution of the Hodgkin-Huxley equations for the intact squid axon bathed in potassium-rich sea water with an externally applied inward current. Under the conditions the two stable steady-states exist, the Hodgkin-Huxley equations have a complex bifurcation structure including, in addition to the two stable steady-states, a stable limit cycle, two unstable equilibrium points, and one asymptotically stable equilibrium point. It was also conc...

  17. Microbiological characterization of stable resuspended dust

    Directory of Open Access Journals (Sweden)

    Nora Kováts

    2016-06-01

    Full Text Available Objectives: Air quality in the stables is characterized by elevated level of dust and aeroallergens which are supposed to directly cause or exacerbate several respiratory disorders. The most often recognized problem is recurrent airway obstruction (RAO, previously known as chronic obstructive pulmonary disease (COPD. There is some indication that aeroallergens (among them endotoxins may also cause inflammation in human airways and may exceed safe levels in stables. Monitoring studies have covered mainly the determination of the concentration of respirable particles and of culturable fungi and their toxins. However, these particles do not only directly affect the respiratory system, but might act as a carrier conveying toxic contaminants and biological agents such as bacteria. In a typical, 20-horse Hungarian stable, microbial community of respirable fraction of resuspended dust has been characterized to reveal if these particles convey hazardous pathogenic bacteria, posing risk to either horses or staff. Material and Methods: Resuspended dust was sampled using a mobile instrument. The instrument contains a PARTISOL-FRM model 2000 sampler that was operated at a flow rate of 16.7 l/min and a cyclone separator which collected the particulate matter with an aerodynamic size between 1 μm and 10 μm (PM1–10 fraction. Microbial taxa were identified by culture-independent next generation sequencing (NGS of variable 16S ribosomal ribonucleic acid (rRNA gene regions. Results: In total, 1491 different taxa were identified, of them 384 were identified to species level, 961 to genus level. The sample was dominated by common ubiquitous soil and organic material-dwelling taxa. Conclusions: Pathogens occurred at low abundance, and were represented by mostly facultative human pathogens, with the prevalence of Staphylococcus species.

  18. Stable channel of reclaimed tidal lowland

    Science.gov (United States)

    Syarifudin, Achmad; Imanuddin, Momon S.; Moerwanto, Arie S.; Suryadi, F. X.

    2017-11-01

    This study aimed to develop models of the Operation and Maintenance in the reclaimed tidal marsh area to get a stable channel. The research location is reclaimed tidal delta area Telang I Primary 8 representing land typology A/B and a survey conducted in 13 South Secondary Schemes following existing tertiary Telang I. MIKE - 11 computer models used used to analyze the movement of sediment in the channel in both the Primary channel 8, SPD, SDU and tertiary channels in block 13 South. Calibration model with multiple channels in the field of physical parameters has been performed to obtain results close to the results of measurement modeling sediment movement in the channel. The integration models of MIKE - 11 models with various scenarios are used to model the operation and maintenance of the channel in the tidal marsh area to get a stable channel. According to the scheme P8 - 13S, OM models obtained 75 percent, in which the secondary channel (SPD/SDU) and built flap gate in tertiary channel, get a well prototype model of the stable channel (equilibriums), where the average erosion on P8 at a distance of 3,200 m in the amount of 4,472,049 m3 and the mean sedimentation in the SPD of 963,836 m3 and mean of sedimentation in the tertiary channel of 3,508,213 m3. Similarly, on average erosion P8 by 4,135,649 m3 and the mean sedimentation in the SDU of 681,304 m3 and the mean sedimentation in the tertiary channel of 3,454,345 m3.

  19. Aggressive Fibromatosis: Evidence for a Stable Phase

    Directory of Open Access Journals (Sweden)

    Gillian Mitchell

    1998-01-01

    Full Text Available Purpose. Aggressive fibromatosis (AF is an uncommon locally infiltrating benign disease of soft tissue for which treatment comprises complete surgical resection. Radiotherapy can be given postoperatively if the margin is incompletely resected. If the tumour is inoperable radiotherapy provides an alternative treatment. Hormone therapy and cytotoxic chemotherapy have also been used for unresectable or recurrent disease. All treatment modalities carry an associated morbidity. We believe that the natural history of aggressive fibromatosis may include a period of stable disease without progression, during which time, treatment is not always necessary.

  20. Stable isogeometric analysis of trimmed geometries

    Science.gov (United States)

    Marussig, Benjamin; Zechner, Jürgen; Beer, Gernot; Fries, Thomas-Peter

    2017-04-01

    We explore extended B-splines as a stable basis for isogeometric analysis with trimmed parameter spaces. The stabilization is accomplished by an appropriate substitution of B-splines that may lead to ill-conditioned system matrices. The construction for non-uniform knot vectors is presented. The properties of extended B-splines are examined in the context of interpolation, potential, and linear elasticity problems and excellent results are attained. The analysis is performed by an isogeometric boundary element formulation using collocation. It is argued that extended B-splines provide a flexible and simple stabilization scheme which ideally suits the isogeometric paradigm.

  1. Preliminary results from a microvolume, dynamically heated analytical column for preconcentration and separation of simple gases prior to stable isotopic analysis

    Science.gov (United States)

    Panetta, Robert James; Seed, Mike

    2016-04-01

    Stable isotope applications that call for preconcentration (i.e., greenhouse gas measurements, small carbonate samples, etc.) universally call for cryogenic fluids such as liquid nitrogen, dry ice slurries, or expensive external recirculation chillers. This adds significant complexity, first and foremost in the requirements to store and handle such dangerous materials. A second layer of complexity is the instrument itself - with mechanisms to physically move either coolant around the trap, or move a trap in or out of the coolant. Not to mention design requirements for hardware that can safely isolate the fluid from other sensitive areas. In an effort to simplify the isotopic analysis of gases requiring preconcentration, we have developed a new separation technology, UltiTrapTM (patent pending), which leverage's the proprietary Advanced Purge & Trap (APT) Technology employed in elemental analysers from Elementar Analysensysteme GmbH products. UltiTrapTM has been specially developed as a micro volume, dynamically heated GC separation column. The introduction of solid-state cooling technology enables sub-zero temperatures without cryogenics or refrigerants, eliminates all moving parts, and increases analytical longevity due to no boiling losses of coolant . This new technology makes it possible for the system to be deployed as both a focussing device and as a gas separation device. Initial data on synthetic gas mixtures (CO2/CH4/N2O in air), and real-world applications including long-term room air and a comparison between carbonated waters of different origins show excellent agreement with previous technologies.

  2. Remarks on stable and quasi-stable k-strings at large N

    International Nuclear Information System (INIS)

    Armoni, A.; Shifman, M.

    2003-01-01

    We discuss k-strings in the large-N Yang-Mills theory and its supersymmetric extension. Whereas the tension of the bona fide (stable) QCD string is expected to depend only on the N-ality of the representation, tensions that depend on specific representation R are often reported in the lattice literature. In particular, adjoint strings are discussed and found in certain simulations. We clarify this issue by systematically exploiting the notion of the quasi-stable strings which becomes well-defined at large N. The quasi-stable strings with representation-dependent tensions decay, but the decay rate (per unit length per unit time) is suppressed as Λ 2 F(N) where F(N) falls off as a function of N. It can be determined on the case-by-case basis. The quasi-stable strings eventually decay into stable strings whose tension indeed depends only on the N-ality. We also briefly review large-N arguments showing why the Casimir formula for the string tension cannot be correct, and present additional arguments in favor of the sine formula. Finally, we comment on the relevance of our estimates to Euclidean lattice measurements

  3. Multivariate Max-Stable Spatial Processes

    KAUST Repository

    Genton, Marc G.

    2014-01-06

    Analysis of spatial extremes is currently based on univariate processes. Max-stable processes allow the spatial dependence of extremes to be modelled and explicitly quantified, they are therefore widely adopted in applications. For a better understanding of extreme events of real processes, such as environmental phenomena, it may be useful to study several spatial variables simultaneously. To this end, we extend some theoretical results and applications of max-stable processes to the multivariate setting to analyze extreme events of several variables observed across space. In particular, we study the maxima of independent replicates of multivariate processes, both in the Gaussian and Student-t cases. Then, we define a Poisson process construction in the multivariate setting and introduce multivariate versions of the Smith Gaussian extremevalue, the Schlather extremal-Gaussian and extremal-t, and the BrownResnick models. Inferential aspects of those models based on composite likelihoods are developed. We present results of various Monte Carlo simulations and of an application to a dataset of summer daily temperature maxima and minima in Oklahoma, U.S.A., highlighting the utility of working with multivariate models in contrast to the univariate case. Based on joint work with Simone Padoan and Huiyan Sang.

  4. Application of stable isotope to breath test

    International Nuclear Information System (INIS)

    Sasaki, Yasuto

    1988-01-01

    Needles to say, radioisotopes have good characteristics as a tracer for examining biological functions. In fact, scyntigraphy is widely used over Japan. It is true, however, that there are some difficulties in applying radioisotopes to humans. Thus, greater attention began to be attracted to stable isotopes in the late 1960s, because these substances can be used for infants and pregnant women. They can be stored for a long period of time since they do not suffer damping as in the case of radioisotopes. In addition to serving as a tracer, stable isotopes can provide structural-chemical information including the position of isotope labels, and the mass and atomic composition of fragment ions. Such techniques as NMR spectroscopy is employed for this purpose. The method is currently used to perform examinations of congenital metabolic disorders. The carbon isotopes of 13 C and 14 C are used for breath test. Compounds labeled with these isotopes are administered and their ratio to the total CO 2 in breath is measured to diagnose diseases. In the early 1970s, 13 C has come into use for breath test. Similar breath test is applied to diagnosis of the bacterial overgrowth syndrome and ileal dysfunction syndrome. (Nogami, K.)

  5. Stable states in a strong IR field

    Science.gov (United States)

    Zhong, Changchun; Robicheaux, Francis

    2015-05-01

    It is found that 10% of atoms stay in the quasi-stable states after being exposed to intense laser or microwave (MW) pulses, even though the pulses' intensity is much stronger than that needed for static fields ionization. The reason why atoms survive those strong pulses has attracted growing attentions. A. Arakelyan et al. have observed the optical spectra of the surviving Lithium atoms after interaction with intense 38-GHz MW fields for more than 1000 cycles, and the spectra exhibit a periodic train of peaks 38 GHz apart. It suggests that those weakly bound Rydberg electrons seldom go back to the ionic core, where the cycle average energy exchange happens. In this study, we are interested in the electron behavior in the presence of intense infrared fields with a much shorter wavelength (1000 nm). By solving the full 3D time dependent Schrodinger equation, we calculate the spectra of the surviving atoms under intense IR fields. Our numerical calculations show atoms survive the intense field in quasi-stable states for a long time, and the optical spectra are obviously modulated by the IR frequency. Through tuning the ponderomotive energy, we see how field parameters affect the behavior of electrons. Different atoms, such as Hydrogen, Helium, Lithium, and Sodium, are tested to see how atom's energy structures influence the results.

  6. Color stable manganese-doped phosphors

    Science.gov (United States)

    Lyons, Robert Joseph [Burnt Hills, NY; Setlur, Anant Achyut [Niskayuna, NY; Deshpande, Anirudha Rajendra [Twinsburg, OH; Grigorov, Ljudmil Slavchev [Sofia, BG

    2012-08-28

    A process for preparing color stable Mn.sup.+4 doped phosphors includes providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof. A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor composition radiationally coupled to the light source, and which includes a color stable Mn.sup.+4 doped phosphor.

  7. Estimation of Time-Varying Autoregressive Symmetric Alpha Stable

    Data.gov (United States)

    National Aeronautics and Space Administration — In the last decade alpha-stable distributions have become a standard model for impulsive data. Especially the linear symmetric alpha-stable processes have found...

  8. Stable CSR in Storage Rings: A Model

    International Nuclear Information System (INIS)

    Sannibale, F.

    2005-01-01

    A comprehensive historical view of the work done on coherent synchrotron radiation (CSR) in storage rings is given in reference [1]. Here we want just to point out that even if the issue of CSR in storage rings was already discussed over 50 years ago, it is only recently that a considerable number of observations have been reported. In fact, intense bursts of coherent synchrotron radiation with a stochastic character were measured in the terahertz frequency range, at several synchrotron light source storage rings [2-8]. It has been shown [8-11], that this bursting emission of CSR is associated with a single bunch instability, usually referred as microbunching instability (MBI), driven by the fields of the synchrotron radiation emitted by the bunch itself. Of remarkably different characteristics was the CSR emission observed at BESSY II in Berlin, when the storage ring was tuned into a special low momentum compaction mode [12, 13]. In fact, the emitted radiation was not the quasi-random bursting observed in the other machines, but a powerful and stable flux of broadband CSR in the terahertz range. This was an important result, because it experimentally demonstrated the concrete possibility of constructing a stable broadband source with extremely high power in the terahertz region. Since the publication of the first successful experiment using the ring as a CSR source [14], BESSY II has regular scheduled user's shifts dedicated to CSR experiments. At the present time, several other laboratories are investigating the possibility of a CSR mode of operation [15-17] and a design for a new ring optimized for CSR is at an advanced stage [18]. In what follows, we describe a model that first accounts for the BESSY II observations and then indicates that the special case of BESSY II is actually quite general and typical when relativistic electron storage rings are tuned for short bunches. The model provides a scheme for predicting and optimizing the performance of ring

  9. Stable CSR in storage rings: A model

    International Nuclear Information System (INIS)

    Sannibale, Fernando; Byrd, John M.; Loftsdottir, Agusta; Venturini, Marco; Abo-Bakr, Michael; Feikes, Jorge; Holldack, Karsten; Kuske, Peter; Wustefeld, Godehart; Hubers, Heinz-Willerm; Warnock, Robert

    2005-01-01

    A comprehensive historical view of the work done on coherent synchrotron radiation (CSR) in storage rings is given in reference [1]. Here we want just to point out that even if the issue of CSR in storage rings was already discussed over 50 years ago, it is only recently that a considerable number of observations have been reported. In fact, intense bursts of coherent synchrotron radiation with a stochastic character were measured in the terahertz frequency range, at several synchrotron light source storage rings [2-8]. It has been shown [8-11], that this bursting emission of CSR is associated with a single bunch instability, usually referred as microbunching instability (MBI), driven by the fields of the synchrotron radiation emitted by the bunch itself. Of remarkably different characteristics was the CSR emission observed at BESSY II in Berlin, when the storage ring was tuned into a special low momentum compaction mode [12, 13]. In fact, the emitted radiation was not the quasi-random bursting observed in the other machines, but a powerful and stable flux of broadband CSR in the terahertz range. This was an important result, because it experimentally demonstrated the concrete possibility of constructing a stable broadband source with extremely high power in the terahertz region. Since the publication of the first successful experiment using the ring as a CSR source [14], BESSY II has regular scheduled user s shifts dedicated to CSR experiments. At the present time, several other laboratories are investigating the possibility of a CSR mode of operation [15-17] and a design for a new ring optimized for CSR is at an advanced stage [18]. In what follows, we describe a model that first accounts for the BESSY II observations and then indicates that the special case of BESSY II is actually quite general and typical when relativistic electron storage rings are tuned for short bunches. The model provides a scheme for predicting and optimizing the performance of ring

  10. Chance and stability stable distributions and their applications

    CERN Document Server

    Uchaikin, Vladimir V

    1999-01-01

    An introduction to the theory of stable distributions and their applications. It contains a modern outlook on the mathematical aspects of the theory. The authors explain numerous peculiarities of stable distributions and describe the principle concept of probability theory and function analysis. A significant part of the book is devoted to applications of stable distributions. Another notable feature is the material on the interconnection of stable laws with fractals, chaos and anomalous transport processes.

  11. A Note on Interpolation of Stable Processes | Nassiuma | Journal of ...

    African Journals Online (AJOL)

    Interpolation procedures tailored for gaussian processes may not be applied to infinite variance stable processes. Alternative techniques suitable for a limited set of stable case with index α∈(1,2] were initially studied by Pourahmadi (1984) for harmonizable processes. This was later extended to the ARMA stable process ...

  12. Respiratory depression by stable xenon in goats

    International Nuclear Information System (INIS)

    Winkler, S.S.

    1986-01-01

    Regional cerebral blood flow (rCBF) studies with stable xenon have recently become practical. Xenon pharmacology is thus a more than academic interest. The authors studied the respiratory response of three trained goats to a mixture of 70% xenon, 30% oxygen. The relatively high xenon concentration was used because of the animals' resistance to anesthetic effects. Two other goats were treated with equivalent anesthetic concentration of nitrous oxide and halothane. The xenon-treated animals showed respiratory depression, in contrast to the stimulating effects observed with halothane and nitrous oxide. Elevation of PaCO/sub 2/ was significant and would substantially increase cRBF. Their findings emphasize the need to monitor ventilation and respond appropriately if necessary

  13. The production of stable isotopes in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Urgel, M.; Iglesias, J.; Casas, J.; Saviron, J. M.; Quintanilla, M.

    1965-07-01

    The activities developed in the field of the production of stable isotopes by means of ion-exchange chromatography and thermal diffusion techniques are reported. The first method was used to study the separation of the nitrogen and boron isotopes, whereby the separation factor was determined by the break through method. Values ranging from 1,028 to 1,022 were obtained for the separation factor of nitrogen by using ammonium hydroxide solutions while the corresponding values as obtained for boron amounted to 1,035-1,027 using boric acid solutions. Using ammonium chloride or acetate and sodium borate, respectively, resulted in the obtention of values for the separation factor approaching unity. The isotopic separation has been carried out according to the method of development by displacement. The separation of the isotopes of the noble gases, oxygen, nitrogen and carbon has been accomplished resorting to the method of thermal diffusion. (Author) 16 refs.

  14. The uniqueness of stable crack growth data

    International Nuclear Information System (INIS)

    Smith, E.

    1981-01-01

    The paper addresses the uniqueness of the stable crack growth relation, with particular reference to creep crack growth and stress corrosion crack growth, where it is the pattern to use laboratory data which relates the stress intensity K to the crack growth rate dc/dt. Simple models are used to define the conditions under which the K versus dc/dt data is unique. Extensive use is made of the Dugdale-Bilby-Cottrell-Swinden (DBCS) model, in which the yield accompanying crack growth is assumed to be confined to an infinitesimal thin strip coplanar with the growing crack. The DBCS model can be modified to give an incremental growth criterion, which is in the form of a differential equation relating the stress intensity to crack length. The conditions under which this equation gives a unique relation between stress intensity and crack length are then investigated. (orig./HP)

  15. The production of stable isotopes in Spain

    International Nuclear Information System (INIS)

    Urgel, M.; Iglesias, J.; Casas, J.; Saviron, J. M.; Quintanilla, M.

    1965-01-01

    The activities developed in the field of the production of stable isotopes by means of ion-exchange chromatography and thermal diffusion techniques are reported. The first method was used to study the separation of the nitrogen and boron isotopes, whereby the separation factor was determined by the break through method. Values ranging from 1,028 to 1,022 were obtained for the separation factor of nitrogen by using ammonium hydroxide solutions while the corresponding values as obtained for boron amounted to 1,035-1,027 using boric acid solutions. Using ammonium chloride or acetate and sodium borate, respectively, resulted in the obtention of values for the separation factor approaching unity. The isotopic separation has been carried out according to the method of development by displacement. The separation of the isotopes of the noble gases, oxygen, nitrogen and carbon has been accomplished resorting to the method of thermal diffusion. (Author) 16 refs

  16. The Search for Stable, Massive, Elementary Particles

    International Nuclear Information System (INIS)

    Kim, Peter C.

    2001-01-01

    In this paper we review the experimental and observational searches for stable, massive, elementary particles other than the electron and proton. The particles may be neutral, may have unit charge or may have fractional charge. They may interact through the strong, electromagnetic, weak or gravitational forces or through some unknown force. The purpose of this review is to provide a guide for future searches--what is known, what is not known, and what appear to be the most fruitful areas for new searches. A variety of experimental and observational methods such as accelerator experiments, cosmic ray studies, searches for exotic particles in bulk matter and searches using astrophysical observations is included in this review

  17. Multivariate max-stable spatial processes

    KAUST Repository

    Genton, Marc G.

    2015-02-11

    Max-stable processes allow the spatial dependence of extremes to be modelled and quantified, so they are widely adopted in applications. For a better understanding of extremes, it may be useful to study several variables simultaneously. To this end, we study the maxima of independent replicates of multivariate processes, both in the Gaussian and Student-t cases. We define a Poisson process construction and introduce multivariate versions of the Smith Gaussian extreme-value, the Schlather extremal-Gaussian and extremal-t, and the Brown–Resnick models. We develop inference for the models based on composite likelihoods. We present results of Monte Carlo simulations and an application to daily maximum wind speed and wind gust.

  18. Stable computation of generalized singular values

    Energy Technology Data Exchange (ETDEWEB)

    Drmac, Z.; Jessup, E.R. [Univ. of Colorado, Boulder, CO (United States)

    1996-12-31

    We study floating-point computation of the generalized singular value decomposition (GSVD) of a general matrix pair (A, B), where A and B are real matrices with the same numbers of columns. The GSVD is a powerful analytical and computational tool. For instance, the GSVD is an implicit way to solve the generalized symmetric eigenvalue problem Kx = {lambda}Mx, where K = A{sup {tau}}A and M = B{sup {tau}}B. Our goal is to develop stable numerical algorithms for the GSVD that are capable of computing the singular value approximations with the high relative accuracy that the perturbation theory says is possible. We assume that the singular values are well-determined by the data, i.e., that small relative perturbations {delta}A and {delta}B (pointwise rounding errors, for example) cause in each singular value {sigma} of (A, B) only a small relative perturbation {vert_bar}{delta}{sigma}{vert_bar}/{sigma}.

  19. Stable Oxygen-18 and Deuterium Isotopes

    DEFF Research Database (Denmark)

    Müller, Sascha

    The application of stable Oxygen-18 (18O) and Deuterium (2H) isotopes, as a tracer for fluxes between different compartments of the water cycle was subject of the present PhD-thesis. During a three year period, temporal data from a wide range of water cycle constituents was collected from...... the Skjern River catchment, Denmark. The presented applications focused on studying the isotopic 'input signal' to the hydrosphere in the form of precipitation, the isotopic 'output signal' with its related dynamic processes at a coastal saltwater-freshwater interface (groundwater isotopes) and the temporal...... development within a given lowland headwater catchment (stream water isotopes). Based on our investigations on the precipitation isotopic composition a local meteoric water line (LMWL) was constructed and expressed as: δ2H=7.4 δ18O + 5.36‰. Moreover, we showed that under maritime temperature climate influence...

  20. A belief-based evolutionarily stable strategy.

    Science.gov (United States)

    Deng, Xinyang; Wang, Zhen; Liu, Qi; Deng, Yong; Mahadevan, Sankaran

    2014-11-21

    As an equilibrium refinement of the Nash equilibrium, evolutionarily stable strategy (ESS) is a key concept in evolutionary game theory and has attracted growing interest. An ESS can be either a pure strategy or a mixed strategy. Even though the randomness is allowed in mixed strategy, the selection probability of pure strategy in a mixed strategy may fluctuate due to the impact of many factors. The fluctuation can lead to more uncertainty. In this paper, such uncertainty involved in mixed strategy has been further taken into consideration: a belief strategy is proposed in terms of Dempster-Shafer evidence theory. Furthermore, based on the proposed belief strategy, a belief-based ESS has been developed. The belief strategy and belief-based ESS can reduce to the mixed strategy and mixed ESS, which provide more realistic and powerful tools to describe interactions among agents. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Stable orbits for lunar landing assistance

    Science.gov (United States)

    Condoleo, Ennio; Cinelli, Marco; Ortore, Emiliano; Circi, Christian

    2017-10-01

    To improve lunar landing performances in terms of mission costs, trajectory determination and visibility the use of a single probe located over an assistance orbit around the Moon has been taken into consideration. To this end, the properties of two quasi-circular orbits characterised by a stable behaviour of semi-major axis, eccentricity and inclination have been investigated. The analysis has demonstrated the possibility of using an assistance probe, located over one of these orbits, as a relay satellite between lander and Earth, even in the case of landings on the far side of the Moon. A comparison about the accuracy in retrieving the lander's state with respect to the use of a probe located in the Lagrangian point L2 of the Earth-Moon system has also been carried out.

  2. Stable glomerular filtration rate in normotensive IDDM patients with stable microalbuminuria. A 5-year prospective study

    DEFF Research Database (Denmark)

    Mathiesen, E R; Feldt-Rasmussen, B; Hommel, E

    1997-01-01

    OBJECTIVE: To investigate the long-term course of glomerular filtration rate (GFR) in IDDM patients with microalbuminuria in order to identify patients with stable or declining kidney function over a 5-year study. RESEARCH DESIGN AND METHODS: Forty normotensive (129 +/- 11/80 +/- 8 mmHg) IDDM...

  3. Stable carbides in transition metal alloys

    International Nuclear Information System (INIS)

    Piotrkowski, R.

    1991-01-01

    In the present work different techniques were employed for the identification of stable carbides in two sets of transition metal alloys of wide technological application: a set of three high alloy M2 type steels in which W and/or Mo were total or partially replaced by Nb, and a Zr-2.5 Nb alloy. The M2 steel is a high speed steel worldwide used and the Zr-2.5 Nb alloy is the base material for the pressure tubes in the CANDU type nuclear reactors. The stability of carbide was studied in the frame of Goldschmidt's theory of interstitial alloys. The identification of stable carbides in steels was performed by determining their metallic composition with an energy analyzer attached to the scanning electron microscope (SEM). By these means typical carbides of the M2 steel, MC and M 6 C, were found. Moreover, the spatial and size distribution of carbide particles were determined after different heat treatments, and both microstructure and microhardness were correlated with the appearance of the secondary hardening phenomenon. In the Zr-Nb alloy a study of the α and β phases present after different heat treatments was performed with optical and SEM metallographic techniques, with the guide of Abriata and Bolcich phase diagram. The α-β interphase boundaries were characterized as short circuits for diffusion with radiotracer techniques and applying Fisher-Bondy-Martin model. The precipitation of carbides was promoted by heat treatments that produced first the C diffusion into the samples at high temperatures (β phase), and then the precipitation of carbide particles at lower temperature (α phase or (α+β)) two phase field. The precipitated carbides were identified as (Zr, Nb)C 1-x with SEM, electron microprobe and X-ray diffraction techniques. (Author) [es

  4. Stable isotopes as tracers for radionuclides

    International Nuclear Information System (INIS)

    Giussani, A.; Bartolo, D. de; Cantone, M.C.; Zilker, T.; Greim, H.; Roth, P.; Werner, E.

    2000-01-01

    The assessment of internal dose after incorporation of radionuclides requires as input data the knowledge of the uptake into the systemic circulation, the distribution and retention in selected organs, the excretion pathways. Realistic biokinetic models are needed for reliable estimates, correct interpretation of bioassay measurements, appropriate decision-making in radiological emergencies. For many radionuclides, however, the biokinetic models currently recommended are often generic, with very few specific parameters, due to the lack of experimental human data. The use of stable isotopes as tracers enables to determine important biokinetic parameters such as the fractional uptake, the clearance from the transfer compartment, the excretion patterns under experimentally controlled conditions. The subjects investigated are not exposed to any radiation risk, so this technique enables to obtain biokinetic information also for sensitive groups of the population, such as children or pregnant women, and to determine age- and gender-specific model parameters. Sophisticated analytical method, able to discriminate and quantitate different isotopes of the same element in complex matrices such as biological fluids, have to be purposely developed and optimized. Activation analysis and mass spectrometry are the most proper techniques of choice. Experiments were conducted with molybdenum, tellurium, ruthenium and zirconium. Activation analysis with protons, thermal ionization mass spectrometry and inductively coupled mass spectrometry were employed for the determination of stable isotopes of these elements in blood plasma and urine samples. Several deviations from the predictions of the ICRP models were observed. For example, modifications to the current model for molybdenum have been suggested on the basis of these results. The dose coefficients to the target regions calculated with this proposed model are even of one order of magnitude different than the ICRP estimates

  5. Stability properties of nonlinear dynamical systems and evolutionary stable states

    Energy Technology Data Exchange (ETDEWEB)

    Gleria, Iram, E-mail: iram@fis.ufal.br [Instituto de Física, Universidade Federal de Alagoas, 57072-970 Maceió-AL (Brazil); Brenig, Leon [Faculté des Sciences, Université Libre de Bruxelles, 1050 Brussels (Belgium); Rocha Filho, Tarcísio M.; Figueiredo, Annibal [Instituto de Física and International Center for Condensed Matter Physics, Universidade de Brasília, 70919-970 Brasília-DF (Brazil)

    2017-03-18

    Highlights: • We address the problem of equilibrium stability in a general class of non-linear systems. • We link Evolutionary Stable States (ESS) to stable fixed points of square quasi-polynomial (QP) systems. • We show that an interior ES point may be related to stable interior fixed points of QP systems. - Abstract: In this paper we address the problem of stability in a general class of non-linear systems. We establish a link between the concepts of asymptotic stable interior fixed points of square Quasi-Polynomial systems and evolutionary stable states, a property of some payoff matrices arising from evolutionary games.

  6. Influence of horse stable environment on human airways

    Directory of Open Access Journals (Sweden)

    Pringle John

    2009-05-01

    Full Text Available Abstract Background Many people spend considerable amount of time each day in equine stable environments either as employees in the care and training of horses or in leisure activity. However, there are few studies available on how the stable environment affects human airways. This study examined in one horse stable qualitative differences in indoor air during winter and late summer conditions and assessed whether air quality was associated with clinically detectable respiratory signs or alterations to selected biomarkers of inflammation and lung function in stable personnel. Methods The horse stable environment and stable-workers (n = 13 in one stable were investigated three times; first in the winter, second in the interjacent late summer and the third time in the following winter stabling period. The stable measurements included levels of ammonia, hydrogen sulphide, total and respirable dust, airborne horse allergen, microorganisms, endotoxin and glucan. The stable-workers completed a questionnaire on respiratory symptoms, underwent nasal lavage with subsequent analysis of inflammation markers, and performed repeated measurements of pulmonary function. Results Measurements in the horse stable showed low organic dust levels and high horse allergen levels. Increased viable level of fungi in the air indicated a growing source in the stable. Air particle load as well as 1,3-β-glucan was higher at the two winter time-points, whereas endotoxin levels were higher at the summer time-point. Two stable-workers showed signs of bronchial obstruction with increased PEF-variability, increased inflammation biomarkers relating to reported allergy, cold or smoking and reported partly work-related symptoms. Furthermore, two other stable-workers reported work-related airway symptoms, of which one had doctor's diagnosed asthma which was well treated. Conclusion Biomarkers involved in the development of airway diseases have been studied in relation to

  7. Stable isotope analysis in primatology: a critical review.

    Science.gov (United States)

    Sandberg, Paul A; Loudon, James E; Sponheimer, Matt

    2012-11-01

    Stable isotope analysis has become an important tool in ecology over the last 25 years. A wealth of ecological information is stored in animal tissues in the relative abundances of the stable isotopes of several elements, particularly carbon and nitrogen, because these isotopes navigate through ecological processes in predictable ways. Stable carbon and nitrogen isotopes have been measured in most primate taxonomic groups and have yielded information about dietary content, dietary variability, and habitat use. Stable isotopes have recently proven useful for addressing more fine-grained questions about niche dynamics and anthropogenic effects on feeding ecology. Here, we discuss stable carbon and nitrogen isotope systematics and critically review the published stable carbon and nitrogen isotope data for modern primates with a focus on the problems and prospects for future stable isotope applications in primatology. © 2012 Wiley Periodicals, Inc.

  8. Tungsten Stable Isotope Compositions of Ferromanganese Crusts

    Science.gov (United States)

    Abraham, K.; Barling, J.; Hein, J. R.; Schauble, E. A.; Halliday, A. N.

    2014-12-01

    We report the first accurate and precise data for mass-dependent fractionation of tungsten (W) stable isotopes, using a double spike technique and MC-ICPMS. Results are expressed relative to the NIST 3136 W isotope standard as per mil deviations in 186W/184W (δ186W). Although heavy element mass-dependent fractionations are expected to be small, Tl and U both display significant low temperature isotopic fractionations. Theoretical calculations indicate that W nuclear volume isotopic effects should be smaller than mass-dependent fractionations at low temperatures. Hydrogenetic ferromanganese (Fe-Mn) crusts precipitate directly from seawater and have been used as paleoceanographic recorders of temporal changes in seawater chemistry. Crusts are strongly enriched in W and other metals, and are a promising medium for exploring W isotopic variability. Tungsten has a relatively long residence time in seawater of ~61,000 years, mainly as the tungstate ion (WO42-). Water depth profiles show conservative behaviour. During adsorption on Fe-Mn crusts, W species form inner-sphere complexes in the hexavalent (W6+) state. The major host phase is thought to be Mn oxides and the lighter W isotope is expected to be absorbed preferentially. Surface scrapings of 13 globally distributed hydrogenetic Fe-Mn crusts display δ186W from -0.08 to -0.22‰ (±0.03‰, 2sd). A trend toward lighter W isotope composition exists with increasing water depth (~1500 to ~5200m) and W concentration. One hydrothermal Mn-oxide sample is anomalously light and Mn nodules are both heavy and light relative to Fe-Mn crusts. Tungsten speciation depends on concentration, pH, and time in solution and is not well understood because of the extremely slow kinetics of the reactions. In addition, speciation of aqueous and/or adsorbed species might be sensitive to pressure, showing similar thermodynamic stability but different effective volumes. Thus, W stable isotopes might be used as a water-depth barometer in

  9. Stable nuclear transformation of Eudorina elegans

    Directory of Open Access Journals (Sweden)

    Lerche Kai

    2013-02-01

    Full Text Available Abstract Background A fundamental step in evolution was the transition from unicellular to differentiated, multicellular organisms. Volvocine algae have been used for several decades as a model lineage to investigate the evolutionary aspects of multicellularity and cellular differentiation. There are two well-studied volvocine species, a unicellular alga (Chlamydomonas reinhardtii and a multicellular alga with differentiated cell types (Volvox carteri. Species with intermediate characteristics also exist, which blur the boundaries between unicellularity and differentiated multicellularity. These species include the globular alga Eudorina elegans, which is composed of 16–32 cells. However, detailed molecular analyses of E. elegans require genetic manipulation. Unfortunately, genetic engineering has not yet been established for Eudorina, and only limited DNA and/or protein sequence information is available. Results Here, we describe the stable nuclear transformation of E. elegans by particle bombardment using both a chimeric selectable marker and reporter genes from different heterologous sources. Transgenic algae resistant to paromomycin were achieved using the aminoglycoside 3′-phosphotransferase VIII (aphVIII gene of Streptomyces rimosus, an actinobacterium, under the control of an artificial promoter consisting of two V. carteri promoters in tandem. Transformants exhibited an increase in resistance to paromomycin by up to 333-fold. Co-transformation with non-selectable plasmids was achieved with a rate of 50 - 100%. The luciferase (gluc gene from the marine copepod Gaussia princeps, which previously was engineered to match the codon usage of C. reinhardtii, was used as a reporter gene. The expression of gluc was mediated by promoters from C. reinhardtii and V. carteri. Heterologous heat shock promoters induced an increase in luciferase activity (up to 600-fold at elevated temperatures. Long-term stability and both constitutive and

  10. Introducing Stable Radicals into Molecular Machines.

    Science.gov (United States)

    Wang, Yuping; Frasconi, Marco; Stoddart, J Fraser

    2017-09-27

    Ever since their discovery, stable organic radicals have received considerable attention from chemists because of their unique optical, electronic, and magnetic properties. Currently, one of the most appealing challenges for the chemical community is to develop sophisticated artificial molecular machines that can do work by consuming external energy, after the manner of motor proteins. In this context, radical-pairing interactions are important in addressing the challenge: they not only provide supramolecular assistance in the synthesis of molecular machines but also open the door to developing multifunctional systems relying on the various properties of the radical species. In this Outlook, by taking the radical cationic state of 1,1'-dialkyl-4,4'-bipyridinium (BIPY •+ ) as an example, we highlight our research on the art and science of introducing radical-pairing interactions into functional systems, from prototypical molecular switches to complex molecular machines, followed by a discussion of the (i) limitations of the current systems and (ii) future research directions for designing BIPY •+ -based molecular machines with useful functions.

  11. Canonical, stable, general mapping using context schemes.

    Science.gov (United States)

    Novak, Adam M; Rosen, Yohei; Haussler, David; Paten, Benedict

    2015-11-15

    Sequence mapping is the cornerstone of modern genomics. However, most existing sequence mapping algorithms are insufficiently general. We introduce context schemes: a method that allows the unambiguous recognition of a reference base in a query sequence by testing the query for substrings from an algorithmically defined set. Context schemes only map when there is a unique best mapping, and define this criterion uniformly for all reference bases. Mappings under context schemes can also be made stable, so that extension of the query string (e.g. by increasing read length) will not alter the mapping of previously mapped positions. Context schemes are general in several senses. They natively support the detection of arbitrary complex, novel rearrangements relative to the reference. They can scale over orders of magnitude in query sequence length. Finally, they are trivially extensible to more complex reference structures, such as graphs, that incorporate additional variation. We demonstrate empirically the existence of high-performance context schemes, and present efficient context scheme mapping algorithms. The software test framework created for this study is available from https://registry.hub.docker.com/u/adamnovak/sequence-graphs/. anovak@soe.ucsc.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  12. Chemically Stable Lipids for Membrane Protein Crystallization

    Energy Technology Data Exchange (ETDEWEB)

    Ishchenko, Andrii; Peng, Lingling; Zinovev, Egor; Vlasov, Alexey; Lee, Sung Chang; Kuklin, Alexander; Mishin, Alexey; Borshchevskiy, Valentin; Zhang, Qinghai; Cherezov, Vadim (MIPT); (USC); (Scripps)

    2017-05-01

    The lipidic cubic phase (LCP) has been widely recognized as a promising membrane-mimicking matrix for biophysical studies of membrane proteins and their crystallization in a lipidic environment. Application of this material to a wide variety of membrane proteins, however, is hindered due to a limited number of available host lipids, mostly monoacylglycerols (MAGs). Here, we designed, synthesized, and characterized a series of chemically stable lipids resistant to hydrolysis, with properties complementary to the widely used MAGs. In order to assess their potential to serve as host lipids for crystallization, we characterized the phase properties and lattice parameters of mesophases made of two most promising lipids at a variety of different conditions by polarized light microscopy and small-angle X-ray scattering. Both lipids showed remarkable chemical stability and an extended LCP region in the phase diagram covering a wide range of temperatures down to 4 °C. One of these lipids has been used for crystallization and structure determination of a prototypical membrane protein bacteriorhodopsin at 4 and 20 °C.

  13. 26 S proteasomes function as stable entities

    DEFF Research Database (Denmark)

    Hendil, Klavs B; Hartmann-Petersen, Rasmus; Tanaka, Keiji

    2002-01-01

    , shuttles between a free state and the 26-S proteasome, bringing substrate to the complex. However, S5a was not found in the free state in HeLa cells. Besides, all subunits in PA700, including S5a, exchanged at similar low rates. It therefore seems that 26-S proteasomes function as stable entities during...... dissociate and reassemble during initiation of protein degradation in a ternary complex with the substrate, as in the dissociation-reassembly cycles found for ribosomes and the chaperonin GroEL/GroES. Here we followed disassembly and assembly of 26-S proteasomes in cell extracts as the exchange of PA700...... subunits between mouse and human 26-S proteasomes. Compared to the rate of proteolysis in the same extract, the disassembly-reassembly cycle was much too slow to present an obligatory step in a degradation cycle. It has been suggested that subunit S5a (Mcb1, Rpn10), which binds poly-ubiquitin substrates...

  14. Migration, fertility, and aging in stable populations.

    Science.gov (United States)

    Alho, Juha M

    2008-08-01

    Fertility is below replacement level in all European countries, and population growth is expected to decline in the coming decades. Increasing life expectancy will accentuate concomitant aging of the population. Migration has been seen as a possible means to decelerate aging. In this article, I introduce a stable, open-population model in which cohort net migration is proportional to births. In this case, the migration-fertility trade-off can be studied with particular ease. I show that although migration can increase the growth rate, which tends to make the age distribution younger, it also has an opposite effect because of its typical age pattern. I capture the effect of the age pattern of net migration in a migration-survivor function. The effect of net migration on growth is quantified with data from 17 European countries. I show that some countries already have a level of migration that will lead to stationarity. For other countries with asymptotically declining population, migration still provides opportunities for slowing down aging of the population as a whole.

  15. Shelf-stable foods through irradiation processing

    International Nuclear Information System (INIS)

    1995-11-01

    This survey has been produced from a database on analytical reference materials of biological and environmental origin, which is maintained at the International Atomic Energy Agency. It is an updated version of earlier reports, the last published in 1990. The information presented refers mostly to reference materials for trace element constituents; however, information is also included on a number of other selected measurands of relevance to IAEA programmes, i.e. radionuclides, stable isotopes, anions, cations, organometallic compounds and organic contaminants. The database presently contains over 10,000 analyte values for 455 measurands in 650 reference materials produced by 30 different suppliers. Additional information on the cost of the materials, the unit size supplied, and recommended minimum weight of material for analysis is also provided, if this information is available to the authors. It is expected that this survey will help analysts to select reference materials for quality assurance purposes that match as closely as possible, with respect to matrix type and concentrations of the measurands of interest, their samples to be analyzed. 22 refs, 2 tabs

  16. STABLE ISOTOPE GEOCHEMISTRY OF MASSIVE ICE

    Directory of Open Access Journals (Sweden)

    Yurij K. Vasil’chuk

    2016-01-01

    Full Text Available The paper summarises stable-isotope research on massive ice in the Russian and North American Arctic, and includes the latest understanding of massive-ice formation. A new classification of massive-ice complexes is proposed, encompassing the range and variabilityof massive ice. It distinguishes two new categories of massive-ice complexes: homogeneousmassive-ice complexes have a similar structure, properties and genesis throughout, whereasheterogeneous massive-ice complexes vary spatially (in their structure and properties andgenetically within a locality and consist of two or more homogeneous massive-ice bodies.Analysis of pollen and spores in massive ice from Subarctic regions and from ice and snow cover of Arctic ice caps assists with interpretation of the origin of massive ice. Radiocarbon ages of massive ice and host sediments are considered together with isotope values of heavy oxygen and deuterium from massive ice plotted at a uniform scale in order to assist interpretation and correlation of the ice.

  17. LHC Report: Towards stable beams and collisions

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    Over the past two weeks, the LHC re-commissioning with beam has continued at a brisk pace. The first collisions of 2011 were produced on 2 March, with stable beams and collisions for physics planned for the coming days. Low intensity beams with just a few bunches of particles were used to test the energy ramp to 3.5 TeV and the squeeze. The results were successful and, as a by-product, the first collisions of 2011 were recorded 2 March. One of the main activities carried out by the operation teams has been the careful set-up of the collimation system, and the injection and beam dump protection devices. The collimation system provides essential beam cleaning, preventing stray particles from impacting other elements of the machine, particularly the superconducting magnets. In addition to the collimation system, also the injection and beam dump protection devices perform a vital machine protection role, as they detect any beam that might be mis-directed during rare, but not totally unavoidable, hardware hiccups...

  18. Stable Isotope Group 1984 progress report

    International Nuclear Information System (INIS)

    Lyon, G.L.

    1985-04-01

    The work of the group in 1984 is described and includes studies in isotope geology, isotope hydrology, geochronology, isotope biology and mass spectrometer instrumentation. Geothermal studies have decreased compared to other years, but major data summaries were made for Wairakei and Ngawha. The hydrology of Whakarewarewa and Rotorua is being elucidated using water isotopes. Models of the subsurface flows at Kawerau and Ngawha are being made to relate fluid to mineral isotope compositions. A study of the δ 13 C and δ 34 S compositions of New Zealand oils has been started. Groups of oils of related origin are being defined, and compositions will be compared with those of potential source rocks. A method was developed for isotope analysis of sulphur in rocks. The isotopic composition of water is being used to identify and characterise groundwater aquifers in the Wairarapa and at Poverty Bay. Stable carbon isotopes have been used to identify food sources for invertebrates, and to show biochemical pathways in lactation by cows. The geochronology group is involved in major studies in Antarctica, using U-Pb, Rb-Sr and K-Ar methods. Rocks from North Victoria Land, Marie Byrd Land and the USARP mountains are being compared with possible correlatives in New Zealand and Argentina. Strontium isotope data is being applied to the origin of magmas in several regions of New Zealand. The K-Ar data is being stored on computer files. Fission track measurements are being applied to unravel uplift histories in Westland and Taranaki

  19. Embryotoxicity of stable isotopes and use of stable isotopes in studies of teratogenetic mechanisms

    International Nuclear Information System (INIS)

    Spielmann, H.; Nau, H.

    1986-01-01

    Experiments on teratogenic effects of stable isotopes from our own and other laboratories are evaluated. In the first series of investigations, the enrichment of the stable isotope 13 C derived from U- 13 C-glucose was studied in mouse embryos at various stages of development, including limb buds in organ culture. Preimplantation mouse embryos incubated in vitro in 13 C-enriched medium for 48 hours showed normal development during subsequent differentiation in vitro and also in vivo after embryo transfer to faster mothers. These embryos were 15% to 20% enriched in 13 C. Administration of U-13-C-glucose to pregnant mice during organogenesis led to an increase of the absolute 13 C content of the embryo for several days after the end of isotope administration, whereas the enrichment in maternal tissue decreased. No alterations of embryonic development were detected due to stable isotope enrichment. Development of cultured mouse limb buds was unaffected by incubation with 82 mol% U- 13 C-glucose as judged from morphologic and biochemical criteria. The second part of the article describes the value of deuterium-labeled drugs as probes into the mechanism of activation of teratogenic metabolites. A comparison of the pharmacokinetics as well as the teratogenicity between cyclophosphamide and some specific deuterium-labeled analogues showed that the isotope effect observed can be related to a particular metabolic pathway crucial for teratogenic activation by this drug

  20. [Angle-stable fixation of intramedullary nails using the Angular Stable Locking System® (ASLS)].

    Science.gov (United States)

    Höntzsch, D; Blauth, M; Attal, R

    2011-12-01

    Greater stability in intramedullary osteosynthesis using angle-stable fixation with intramedullary nails and proximal locking screws. A novel screw-and-sleeve system (ASLS®, Synthes GmbH, Oberdorf, Switzerland) is applied using normal cannulated nails. Decisions can be made intraoperatively. This technology widens the range of indications for intramedullary nailing: The smaller and less stable the fragment requiring fixation, the greater the indication for angular stable fixation of the proximal and/or distal fragment. Femoral, tibial and humeral fractures, intramedullary osteosynthesis in osteoporotic bone and ante- and retrograde nailing. Particularly in the case of retrograde nailing, sustained prevention of nail toggling is achieved. None. Drill with the first drill bit, which has the same core diameter as the screw shaft. Drill the cortex to the external diameter of the sleeve. Place the sleeve on the tip of the screw. The screw-sleeve combination is then advanced through the larger near hole until the sleeve-covered screw tip sits in the locking hole of the intramedullary fixation nail. Advance the screw. As the screw diameter becomes larger, the sleeve expands resulting in an angular stable locking effect. The screw is then advanced until the head of the screw sits on the exposed surface of the cortex. The hole is filled with the expanded part of the screw shaft beneath the screw head. The necessary 1-3 turns are cut by the self-tapping flute on the screw. According to experience to date, this form of angle-stable fixation enables earlier and/or greater partial mobilization or earlier full mobilization. In all other respects, the guidelines for aftercare in intramedullary nailing apply. A multi-center pilot study has shown the technique to be reproducible and simple. There have been no complications using this technique to date. Biomechanical laboratory studies have demonstrated that stability with respect to axial and torsional loading is statically and

  1. Unit of stable isotopic N15 analysis

    International Nuclear Information System (INIS)

    Cabrera de Bisbal, Evelin; Paredes U, Maria

    1997-01-01

    The continuous and growing demand of crops and cattle for the domestic inhabitants, forces the search of technical solutions in agriculture. One of the solutions able to be covered in a near future it is the escalation of agricultural production in lands already being cultivated, either by means of an intensification of cultivation and / or increasing the unitary yields. In the intensive cropping systems, the crops extract substantial quantities of nutriments that is recovered by means of the application of fertilizers. Due to the lack of resources and to the increase of commercial inputs prices, it has been necessary to pay attention to the analysis and improvement of low inputs cropping systems and to the effective use of resources. Everything has made to establish a concept of plant nutrition focused system, which integrate the sources of nutriments for plants and the production factors of crops in a productive cropping system, to improve the fertility of soils, the agricultural productivity and profitability. This system includes the biggest efficiency of chemical fertilizers as the maximum profit of alternative sources of nutriments, such as organic fertilizers, citrate-phosphate rocks and biological nitrogen fixation. By means of field experiments under different environmental conditions (soils and climate) it can be determined the best combination of fertilizers practice (dose, placement, opportunity and source) for selected cropping systems. The experimentation with fertilizer, marked with stable and radioactive isotopes, provides a direct and express method to obtain conclusive answers to the questions: where, when and how should be applied. The fertilizers marked with N 1 5 have been used to understand the application of marked fertilizer to the cultivations, and the determination of the proportion of crops nutritious element derived from fertilizer. The isotopic techniques offer a fast and reliable mean to obtain information about the distribution of

  2. How structurally stable are global socioeconomic systems?

    Science.gov (United States)

    Saavedra, Serguei; Rohr, Rudolf P; Gilarranz, Luis J; Bascompte, Jordi

    2014-11-06

    The stability analysis of socioeconomic systems has been centred on answering whether small perturbations when a system is in a given quantitative state will push the system permanently to a different quantitative state. However, typically the quantitative state of socioeconomic systems is subject to constant change. Therefore, a key stability question that has been under-investigated is how strongly the conditions of a system itself can change before the system moves to a qualitatively different behaviour, i.e. how structurally stable the systems is. Here, we introduce a framework to investigate the structural stability of socioeconomic systems formed by a network of interactions among agents competing for resources. We measure the structural stability of the system as the range of conditions in the distribution and availability of resources compatible with the qualitative behaviour in which all the constituent agents can be self-sustained across time. To illustrate our framework, we study an empirical representation of the global socioeconomic system formed by countries sharing and competing for multinational companies used as proxy for resources. We demonstrate that the structural stability of the system is inversely associated with the level of competition and the level of heterogeneity in the distribution of resources. Importantly, we show that the qualitative behaviour of the observed global socioeconomic system is highly sensitive to changes in the distribution of resources. We believe that this work provides a methodological basis to develop sustainable strategies for socioeconomic systems subject to constantly changing conditions. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  3. Stable gastric pentadecapeptide BPC 157 and bupivacaine.

    Science.gov (United States)

    Zivanovic-Posilovic, Gordana; Balenovic, Diana; Barisic, Ivan; Strinic, Dean; Stambolija, Vasilije; Udovicic, Mario; Uzun, Sandra; Drmic, Domagoj; Vlainic, Josipa; Bencic, Martina Lovric; Sindic, Aleksandra; Seiwerth, Sven; Sikiric, Predrag

    2016-12-15

    Bupivacaine toxicity following accidental overdose still lacks therapeutic solution. However, there are major arguments for testing BPC 157 against bupivacaine toxicity in vivo in rats, in particular, and then finally, in vitro. These are: the lack of any known BPC 157 toxicity, a lifesaving effect via the mitigation of arrhythmias in rats underwent hyperkalemia or digitalis toxicity, the elimination of hyperkalemia and arrhythmias in rats underwent succinylcholine toxicity and finally, the reduction of potassium-induced depolarization in vitro (in HEK293 cells) in severe hyperkalemia. Most importantly, BPC 157 successfully prevents and counteracts bupivacaine cardiotoxicity; BPC 157 is effective even against the worst outcomes such as a severely prolonged QRS complex. Here, rats injected with bupivacaine (100mg/kg IP) exhibited bradycardia, AV-block, ventricular ectopies, ventricular tachycardia, T-wave elevation and asystole. All of the fatalities had developed T-wave elevation, high-degree AV-block, respiratory arrest and asystole. These were largely counteracted by BPC 157 administration (50µg/kg, 10µg/kg, 10ng/kg, or 10pg/kg IP) given 30min before or 1min after the bupivacaine injection. When BPC 157 was given 6min after bupivacaine administration, and after the development of prolonged QRS intervals (20ms), the fatal outcome was markedly postponed. Additionally, the effect of bupivacaine on cell membrane depolarization was explored by measuring membrane voltages (Vm) in HEK293 cells. Bupivacaine (1mM) alone caused depolarization of the cells, while in combination with BPC 157 (1µm), the bupivacaine-induced depolarization was inhibited. Together, these findings suggest that the stable gastric pentadecapeptide BPC 157 should be a potential antidote for bupivacaine cardiotoxicity. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Stable colloids in molten inorganic salts

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao; Dasbiswas, Kinjal; Ludwig, Nicholas B.; Han, Gang; Lee, Byeongdu; Vaikuntanathan, Suri; Talapin, Dmitri V.

    2017-02-15

    A colloidal solution is a homogeneous dispersion of particles or droplets of one phase (solute) in a second, typically liquid, phase (solvent). Colloids are ubiquitous in biological, chemical and technological processes1, 2, homogenizing highly dissimilar constituents. To stabilize a colloidal system against coalescence and aggregation, the surface of each solute particle is engineered to impose repulsive forces strong enough to overpower van der Waals attraction and keep the particles separated from each other2. Electrostatic stabilization3, 4 of charged solutes works well in solvents with high dielectric constants, such as water (dielectric constant of 80). In contrast, colloidal stabilization in solvents with low polarity, such as hexane (dielectric constant of about 2), can be achieved by decorating the surface of each particle of the solute with molecules (surfactants) containing flexible, brush-like chains2, 5. Here we report a class of colloidal systems in which solute particles (including metals, semiconductors and magnetic materials) form stable colloids in various molten inorganic salts. The stability of such colloids cannot be explained by traditional electrostatic and steric mechanisms. Screening of many solute–solvent combinations shows that colloidal stability can be traced to the strength of chemical bonding at the solute–solvent interface. Theoretical analysis and molecular dynamics modelling suggest that a layer of surface-bound solvent ions produces long-ranged charge-density oscillations in the molten salt around solute particles, preventing their aggregation. Colloids composed of inorganic particles in inorganic melts offer opportunities for introducing colloidal techniques to solid-state science and engineering applications.

  5. Stable configurations of graphene on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Javvaji, Brahmanandam; Shenoy, Bhamy Maithry [Department of Aerospace Engineering, Indian Institute of Science, Bangalore 560012 (India); Mahapatra, D. Roy, E-mail: droymahapatra@aero.iisc.ernet.in [Department of Aerospace Engineering, Indian Institute of Science, Bangalore 560012 (India); Ravikumar, Abhilash [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal 575025 (India); Hegde, G.M. [Center for Nano Science and Engineering, Indian Institute of Science, Bangalore 560012 (India); Rizwan, M.R. [Department of Metallurgical and Materials Engineering, National Institute of Technology Karnataka, Surathkal 575025 (India)

    2017-08-31

    Highlights: • Simulations of epitaxial growth process for silicon–graphene system is performed. • Identified the most favourable orientation of graphene sheet on silicon substrate. • Atomic local strain due to the silicon–carbon bond formation is analyzed. - Abstract: Integration of graphene on silicon-based nanostructures is crucial in advancing graphene based nanoelectronic device technologies. The present paper provides a new insight on the combined effect of graphene structure and silicon (001) substrate on their two-dimensional anisotropic interface. Molecular dynamics simulations involving the sub-nanoscale interface reveal a most favourable set of temperature independent orientations of the monolayer graphene sheet with an angle of ∽15° between its armchair direction and [010] axis of the silicon substrate. While computing the favorable stable orientations, both the translation and the rotational vibrations of graphene are included. The possible interactions between the graphene atoms and the silicon atoms are identified from their coordination. Graphene sheet shows maximum bonding density with bond length 0.195 nm and minimum bond energy when interfaced with silicon substrate at 15° orientation. Local deformation analysis reveals probability distribution with maximum strain levels of 0.134, 0.047 and 0.029 for 900 K, 300 K and 100 K, respectively in silicon surface for 15° oriented graphene whereas the maximum probable strain in graphene is about 0.041 irrespective of temperature. Silicon–silicon dimer formation is changed due to silicon–carbon bonding. These results may help further in band structure engineering of silicon–graphene lattice.

  6. Stable Continental Region Earthquakes in South China

    Science.gov (United States)

    Liu, L.

    This paper reviews some remarkable characteristics of earthquakes in a Stable Continental Region (SCR) of the South China Block (SCB). The kernel of the SCB is the Yangtze platform solidified in late Proterozoic time, with continental growth to the southeast by a series of fold belts in Paleozoic time. The facts that the deviatoric stress is low, the orientations of the major tectonic features in the SCB are substantially normal to the maximum horizontal principal stress, and a relatively uniform crust, seem to be the major reasons for lack of significant seismicity in most regions of the SCB. Earthquakes in this region are mainly associated with three seismic zones: (1) the Southeast China Coast seismic zone related to Guangdong-Fujian coastal folding belt (associated with Eurasia-Philippine Sea plate collision); (2) the Southern Yellow Sea seismic zone associated with continental shelf rifts and basins; and (3) the Downstream Yangtze River seismic zone spatially coinciding with Tertiary rifts and basin development. All three seismic zones are close to one or two major economic and population centers in the SCB so that they pose significant seismic hazards. Earthquake focal mechanisms in the SCB are consistent with strike-slip to normal faulting stress regimes. Because of the global and national economic significance of the SCB and its dense population, the seismic hazard of the region is of outstanding importance. Comparing the SCB with another less developed region, a pending earthquake with the same size and tectonic setting would cause substantially more severe social and economic losses in the SCB. This paper also compiles an inventory of historic moderate to great earthquakes in the SCB; most of the data are not widely available in English literature.

  7. Tempered stable distributions stochastic models for multiscale processes

    CERN Document Server

    Grabchak, Michael

    2015-01-01

    This brief is concerned with tempered stable distributions and their associated Levy processes. It is a good text for researchers interested in learning about tempered stable distributions.  A tempered stable distribution is one which takes a stable distribution and modifies its tails to make them lighter. The motivation for this class comes from the fact that infinite variance stable distributions appear to provide a good fit to data in a variety of situations, but the extremely heavy tails of these models are not realistic for most real world applications. The idea of using distributions that modify the tails of stable models to make them lighter seems to have originated in the influential paper of Mantegna and Stanley (1994). Since then, these distributions have been extended and generalized in a variety of ways. They have been applied to a wide variety of areas including mathematical finance, biostatistics,computer science, and physics.

  8. Absolute Continuity of Stable Foliations for Mappings of Banach Spaces

    Science.gov (United States)

    Blumenthal, Alex; Young, Lai-Sang

    2017-09-01

    We prove the absolute continuity of stable foliations for mappings of Banach spaces satisfying conditions consistent with time- t maps of certain classes of dissipative PDEs. This property is crucial for passing information from submanifolds transversal to the stable foliation to the rest of the phase space; it is also used in proofs of ergodicity. Absolute continuity of stable foliations is well known in finite dimensional hyperbolic theory. On Banach spaces, the absence of nice geometric properties poses some additional difficulties.

  9. Tukey max-stable processes for spatial extremes

    KAUST Repository

    Xu, Ganggang

    2016-09-21

    We propose a new type of max-stable process that we call the Tukey max-stable process for spatial extremes. It brings additional flexibility to modeling dependence structures among spatial extremes. The statistical properties of the Tukey max-stable process are demonstrated theoretically and numerically. Simulation studies and an application to Swiss rainfall data indicate the effectiveness of the proposed process. © 2016 Elsevier B.V.

  10. Stable SU(5) monopoles with higher magnetic charge

    International Nuclear Information System (INIS)

    Miyamoto, S.; Sato, H.; Tomohiro, S.

    1985-01-01

    Taking into account the electroweak breaking effects, some multiply charged monopoles were shown to be stable by Gardner and Harvey. We give the explicit Ansa$uml: tze for finite-energy, nonsingular solutions of these stable higher-strength monopoles with eg = 1,(3/2),3. We also give the general stability conditions and the detailed behavior of the interaction potentials between two monopoles which produce the stable higher-strength monopoles

  11. Sense of Humor, Stable Affect, and Psychological Well-Being

    Directory of Open Access Journals (Sweden)

    Arnie Cann

    2014-08-01

    Full Text Available A good sense of humor has been implicated as a quality that could contribute to psychological well-being. The mechanisms through which sense of humor might operate include helping to reappraise threats, serving as a character strength, or facilitating happiness. The current research attempts to integrate these possibilities by examining whether a good sense of humor might operate globally by helping to maintain a more stable positive affect. Stable positive affect has been shown to facilitate more effective problem solving and to build resilience. However, not all humor is adaptive humor, so we also examine the roles that different styles of humor use might play. Individual differences in humor styles were used to predict stable levels of affect. Then, in a longitudinal design, humor styles and stable affect were used to predict subsequent resilience and psychological health. The results indicated that stable affect was related to resilience and psychological well-being, and that a sense of humor that involves self-enhancing humor, humor based on maintaining a humorous perspective about one’s experiences, was positively related to stable positive affect, negatively related to stable negative affect, and was mediated through stable affect in influencing resilience, well-being and distress. Thus, while a good sense of humor can lead to greater resilience and better psychological health, the current results, focusing on stable affect, find only self-enhancing humor provides reliable benefits.

  12. Stable glomerular filtration rate in normotensive IDDM patients with stable microalbuminuria. A 5-year prospective study

    DEFF Research Database (Denmark)

    Mathiesen, E R; Feldt-Rasmussen, B; Hommel, E

    1997-01-01

    . Out of 40 patients, 14 progressed to diabetic nephropathy (UAE > 300 mg/24 h). These patients had a significant reduction in GFR (mean -2.2 +/- 3.8 ml x min-1 x year-1; P = 0.05), while GFR remained stable in the remaining 26 patients with nonprogressive microalbuminuria (change in GFR 0.5 +/- 2.1 ml...... x min-1 x year-1; NS). The difference in the rate of decline of GFR was significant (mean 2.7 ml x min-1 x year-1; P

  13. Stable pair invariants of surfaces and Seiberg-Witten invariants

    NARCIS (Netherlands)

    Kool, M.

    2016-01-01

    The moduli space of stable pairs on a local surface X = KS is in general non-compact. The action of C ∗ on the fibres of X induces an action on the moduli space and the stable pair invariants of X are defined by the virtual localization formula. We study the contribution to these invariants of

  14. Stable isotope methodology and its application to nutrition and gastroenterology

    International Nuclear Information System (INIS)

    Klein, P.D.; Hachey, D.L.; Wong, W.W.; Abrams, S.A.

    1993-01-01

    This report describes the activities of the Stable Isotope Laboratory in its function as a core resource facility for stable isotope applications in human nutrition research. Three aspects are covered: Training of visitors, assessment of new instrumentation, and development of new methodology. The research achievements of the laboratory are indicated in the publications that appeared during this period. (author). 23 refs

  15. Visual and olfactory enhancement of stable fly trapping.

    Science.gov (United States)

    Zhu, Junwei J; Zhang, Qing-He; Taylor, David B; Friesen, Kristina A

    2016-09-01

    Stable flies are considered to be one of the major blood-feeding pests in the US livestock industry, causing losses running into billions of dollars annually. Adult stable flies are highly attracted to Alsynite traps; however, Alsynite is becoming increasingly difficult to obtain and is expensive. Here, we report on the development of a less expensive and more efficacious trap based upon a white panel with the option to add visual and olfactory stimuli for enhanced stable fly trapping. White panel traps caught twice as many stable flies than Alsynite traps. Baiting the traps with synthetic manure volatiles increased catches 2-3-fold. Electroretinographic recordings of stable flies showed strong peaks of visual sensitivities occurring at 330-360 nm, 460-525 nm and 605-635 nm. A laboratory study indicated that young stable flies are more responsive to white, whereas gravid females prefer blue; in the field, white traps caught more stable flies than patterned or blue-black traps. Stable fly control can be enhanced by developing more efficient trapping systems with added visual and olfactory stimuli. Published 2015. This article is a U.S. Government work and is in the public domain in the USA. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  16. Stability of Picard Bundle Over Moduli Space of Stable Vector ...

    Indian Academy of Sciences (India)

    Abstract. Answering a question of [BV] it is proved that the Picard bundle on the moduli space of stable vector bundles of rank two, on a Riemann surface of genus at least three, with fixed determinant of odd degree is stable.

  17. Stable isotope geochemistry. 3. rev. and enl. ed.

    International Nuclear Information System (INIS)

    Hoefs, J.

    1987-01-01

    Stable Isotope Geochemistry is an authoritative book comprising theoretical and experimental principles; surveying important fractionation mechanisms affecting the most important elements; discussing the natural variations of geologically important reservoirs. This updated 3rd edition, with a completely rewritten and extended main part, contains two new chapters on stable isotope composition of mantle material and on changes of the ocean during the geological past. (orig.)

  18. Exploring Scintillometry in the Stable Atmospheric Surface Layer

    NARCIS (Netherlands)

    Hartogensis, O.K.

    2006-01-01

    The main objective of this thesis is to investigate observation methods of heat and momentum exchange and key variables that characterise turbulence in the atmospheric stable surface layer (SSL), a layer defined as the lower part of the stable boundary layer (SBL) where surface fluxes do not change

  19. DFT computations of the lattice constant, stable atomic structure and ...

    African Journals Online (AJOL)

    This paper presents the most stable atomic structure and lattice constant of Fullerenes (C60). FHI-aims DFT code was used to predict the stable structure and the computational lattice constant of C60. These were compared with known experimental structures and lattice constants of C60. The results obtained showed that ...

  20. Saturate hydraulic conductivity, water stable aggregates and soil ...

    African Journals Online (AJOL)

    Saturate hydraulic conductivity, water stable aggregates and soil organic matter in a sandy-loam soil in Ikwuano lga of Abia state. ... carbon content of the soil. . Keywords: Toposequence, Water stable aggregates, Saturated hydraulic conductivity, Organic carbon, Slope position. Agro-Science Vol. 4 (1) 2005: pp. 34-37.

  1. Optimization for getting stable plasma initiation in JT-60

    International Nuclear Information System (INIS)

    Yoshino, Ryuji; Neyatani, Yuzuru; Abe, T.

    1988-06-01

    This paper analyses the plasma current build-up just after the breakdown, and investigates the method for obtaining more stable plasma initiation with reduced Volt-second consumption. Control of the amount of particles contained in the wall is necessary for getting the optimum plasma density just after the breakdown, and is essential for obtaining the stable current build-up. (author)

  2. Improved Atmospheric Stable Boundary Layer Formulations for Navy Seasonal Forecasting

    Science.gov (United States)

    2012-09-30

    Long-term goals are to develop methods, descriptions and parameterizations that will alleviate long-standing problems in basically all large-scale numerical atmospheric models in dealing with statically stable and/or very stable conditions, and to implement these for Navy extended forecasting

  3. Fitted-Stable Finite Difference Method for Singularly Perturbed Two ...

    African Journals Online (AJOL)

    A fitted-stable central difference method is presented for solving singularly perturbed two point boundary value problems with the boundary layer at one end (left or right) of the interval. A fitting factor is introduced in second order stable central difference scheme (SCD Method) and its value is obtained using the theory of ...

  4. Stable isotope methods in biological and ecological studies of arthropods

    NARCIS (Netherlands)

    Hood-Nowotny, R.C.; Knols, B.G.J.

    2007-01-01

    This is an eclectic review and analysis of contemporary and promising stable isotope methodologies to study the biology and ecology of arthropods. It is augmented with literature from other disciplines, indicative of the potential for knowledge transfer. It is demonstrated that stable isotopes can

  5. Formulation of stable protein powders by supercritical fluid drying

    NARCIS (Netherlands)

    Jovanović, N.

    2007-01-01

    Protein pharmaceuticals are potent drugs for the treatment of several chronic and life-threatening diseases. However, the complex and sensitive nature of protein molecules requires special attention in the development of stable dosage forms. Developing stable aqueous protein formulations is often a

  6. Enhanced trapping of stable flies via olfactory and visual cues

    Science.gov (United States)

    Adult stable flies are highly attracted to the so-called Alsynite cylinder trap; however this trap is expensive. Here we report the development of a cheaper and better white panel trap with options of adding visual and olfactory stimuli for enhanced stable fly trapping. The white panel trap attracte...

  7. Stable isotopes for improving human nutrition

    International Nuclear Information System (INIS)

    Uauy, Ricardo

    2001-01-01

    recent FAO review of nutrition programs in 19 Latin American countries found that over 20 percent of the population - approximately 83 million people out of an estimated 414 million in the study countries - receives some level of benefits in nutrition-related programs. The allocation of limited national and international assistance resources for these activities in the region is on the order of several billion dollars annually. Undoubtedly these programs are influencing child growth. Significant reductions in underweight and wasting have occurred; but stunting has been more resistant to change. In this setting providing food supplements may be beneficial for some while it may be detrimental for others. The definition of who should benefit from the programs and what is the right combination of nutrients/foods, education, and lifestyle interventions that is required to optimise nutrition and health at each stage of the life cycle is a truly complex problem. This demands the use of the best scientific tools to define who should benefit, what should done and measured as an outcome, how programs should be evaluated, when programs should be expanded, and when they should be stopped. Isotopic and nuclear techniques are tools, not solutions. This presentation will serve to demonstrate how isotopes can contribute to refining nutrition interventions and their impact on public health. Isotopic methods can shorten the time needed to evaluate impact, because they provide sensitive measurements of biological effects. They are faster than traditional methods such as anthropometry for detecting changes in growth and body composition. Micronutrient malnutrition, and especially the bioavailability of vitamins and minerals from traditional foods, are not well evaluated using routine biochemical methods. Radioisotopes have been used successfully in the past. But recent developments in stable isotope techniques offer unique advantages for the design and evaluation of programmes that address

  8. The use of stable isotopes in drug metabolism studies.

    Science.gov (United States)

    Abramson, F P

    2001-06-01

    Although there is a long history of stable isotopes use in drug metabolism research, it is appropriate to evaluate them in pregnancy drug studies in which safety takes highest priority. It is well established through a number of human and animal experiments that stable isotopes themselves rarely generate additional toxicities beyond the molecules to which they are attached. For the analysis of stable isotopes involved in metabolism studies, mass spectrometry plays the predominant role. Several mass spectrometry-based techniques now exist that enable the selective quantitative detection of stable isotopes with better sensitivity and better retention of chromatographic resolution than do in-line radioactivity monitors for 14C. Even mass balance studies can be performed by using stable isotopes, a type of experiment that still predominantly uses radioisotopes. Some of the newest developments in the use of stable isotopes involve biopolymers, in which fully isotope-labeled species can be generated from cells grown in isotopically labeled growth media. Having shown safety, sensitivity, specificity, and versatility, stable isotopes should play an important role in drug metabolism studies in pregnancy.

  9. A Model Describing Stable Coherent Synchrotron Radiation in Storage Rings

    International Nuclear Information System (INIS)

    Sannibale, F.

    2004-01-01

    We present a model describing high power stable broadband coherent synchrotron radiation (CSR) in the terahertz frequency region in an electron storage ring. The model includes distortion of bunch shape from the synchrotron radiation (SR), which enhances higher frequency coherent emission, and limits to stable emission due to an instability excited by the SR wakefield. It gives a quantitative explanation of several features of the recent observations of CSR at the BESSY II storage ring. We also use this model to optimize the performance of a source for stable CSR emission

  10. A model describing stable coherent synchrotron radiation in storage rings

    International Nuclear Information System (INIS)

    Sannibale, F.; Byrd, J.M.; Loftsdottir, A.; Venturini, M.; Abo-Bakr, M.; Feikes, J.; Holldack, K.; Kuske, P.; Wuestefeld, G.; Huebers, H.-W.; Warnock, R.

    2004-01-01

    We present a model describing high power stable broadband coherent synchrotron radiation (CSR) in the terahertz frequency region in an electron storage ring. The model includes distortion of bunch shape from the synchrotron radiation (SR), which enhances higher frequency coherent emission, and limits to stable emission due to an instability excited by the SR wakefield. It gives a quantitative explanation of several features of the recent observations of CSR at the BESSY II storage ring. We also use this model to optimize the performance of a source for stable CSR emission

  11. Stable black phosphorus quantum dots for alkali PH sensor

    Science.gov (United States)

    Guo, Weilan; Song, Haizeng; Yan, Shancheng

    2018-01-01

    Black phosphorus, as a new two-dimensional material has been widely used in sensors, photovoltaic devices, etc. However, thin layered black phosphorus chemically degrades rapidly under ambient and aqueous conditions, which hinders the application of it in the chemical sensors. In this work, stable black phosphorus quantum dots (BPQDs) in solution are successfully synthesized by functionalization with 4-nitrobenzene-diazonium (4-NBD). The stable BPQDs are investigated by TEM, AFM, Raman, and UV-absorption. As a potential application, the stable BPQDs are used as sensors in alkali solution, which exhibit outstanding performance. Our work paves the way towards a new application with BPQDs in solution.

  12. Use of stable isotopes in human nutrition in Senegal

    International Nuclear Information System (INIS)

    2016-01-01

    In Senegal, the Laboratory of Nutrition of the Department of Animal Biology of the Faculty of Science and Technology of UCAD has been using stable isotopic techniques for nearly twenty years. Stable isotopes were applied to different target populations to measure milk production, exclusive breastfeeding, body composition, micronutrient bioavailability and total energy expenditure.The application of stable isotopic techniques in nutrition has contributed to advocacy for exclusive breastfeeding for up to 6 months in Senegal. It enabled government decision-makers to obtain essential information on the quality of foods needed for optimal effect during pregnancy and for infant growth and the results were reflected in the national policy on micronutrient supplementation.

  13. High-Order Entropy Stable Formulations for Computational Fluid Dynamics

    Science.gov (United States)

    Carpenter, Mark H.; Fisher, Travis C.

    2013-01-01

    A systematic approach is presented for developing entropy stable (SS) formulations of any order for the Navier-Stokes equations. These SS formulations discretely conserve mass, momentum, energy and satisfy a mathematical entropy inequality. They are valid for smooth as well as discontinuous flows provided sufficient dissipation is added at shocks and discontinuities. Entropy stable formulations exist for all diagonal norm, summation-by-parts (SBP) operators, including all centered finite-difference operators, Legendre collocation finite-element operators, and certain finite-volume operators. Examples are presented using various entropy stable formulations that demonstrate the current state-of-the-art of these schemes.

  14. Stable emulsions in extraction systems containing zirconium and silicic acid

    International Nuclear Information System (INIS)

    Sinegribova, O.A.; Chizhevskaya, S.V.; Kotenko, A.A.

    1989-01-01

    The effect of zirconium nitrate compound nature and silicic acid on the rate of emulsions stratification in extraction systems depending on the components concentration, solution acidity, its past history, is studied. It is stated that stable multinuclear zirconium compounds have an influence on formation of stable emulsions in systems containing silicic acid. On the basis of results of chemical analysis and properties of interphase precipitates, being part of stable emulsion, suppositions on mechanism of interaction of zirconium nitrate compounds with silicic acid β-form are made

  15. What can Fe stable isotopes tell us about magmas?

    DEFF Research Database (Denmark)

    Stausberg, Niklas

    The majority of the Earth’s crust is formed by magmas, and understanding their production and differentiation is important to interpret the geologic rock record. A powerful tool to investigate magmatic processes is the distribution of the stable isotopes of the major redox-sensitive element...... the differentiation of magmas from the perspective of Fe stable isotopes, integrated with petrology, by studying igneous rocks and their constituent phases (minerals and glasses) from the Bushveld Complex, South Africa, Thingmuli, Iceland, Pantelleria, Italy, and the Bishop Tuff, USA. The findings are interpreted...... and for more quantitative model of the magmatic processes producing enigmatic stable isotope compositions of rhyolitic and granite magmas....

  16. Enhancement of plasmid-mediated stable gene expression by ...

    African Journals Online (AJOL)

    WPRE) is a possible enhancer of gene expression in mammalian cells that promotes efficient export of unspliced (RNA) into the cytoplasm, as has been proved in transient transfection. In this study, WPRE was evaluated for enhancing stable ...

  17. Stable isotope labeling strategy based on coding theory

    International Nuclear Information System (INIS)

    Kasai, Takuma; Koshiba, Seizo; Yokoyama, Jun; Kigawa, Takanori

    2015-01-01

    We describe a strategy for stable isotope-aided protein nuclear magnetic resonance (NMR) analysis, called stable isotope encoding. The basic idea of this strategy is that amino-acid selective labeling can be considered as “encoding and decoding” processes, in which the information of amino acid type is encoded by the stable isotope labeling ratio of the corresponding residue and it is decoded by analyzing NMR spectra. According to the idea, the strategy can diminish the required number of labelled samples by increasing information content per sample, enabling discrimination of 19 kinds of non-proline amino acids with only three labeled samples. The idea also enables this strategy to combine with information technologies, such as error detection by check digit, to improve the robustness of analyses with low quality data. Stable isotope encoding will facilitate NMR analyses of proteins under non-ideal conditions, such as those in large complex systems, with low-solubility, and in living cells

  18. Estimation of Time Varying Autoregressive Symmetric Alpha Stable

    Data.gov (United States)

    National Aeronautics and Space Administration — In this work, we present a novel method for modeling time-varying autoregressive impulsive signals driven by symmetric alpha stable distributions. The proposed...

  19. Quantification of stable isotope label in metabolites via mass spectrometry.

    Science.gov (United States)

    Huege, Jan; Goetze, Jan; Dethloff, Frederik; Junker, Bjoern; Kopka, Joachim

    2014-01-01

    Isotope labelling experiments with stable or radioactive isotopes have long been an integral part of biological and medical research. Labelling experiments led to the discovery of new metabolic pathways and made it possible to calculate the fluxes responsible for a metabolic phenotype, i.e., the qualitative and quantitative composition of metabolites in a biological system. Prerequisite for efficient isotope labelling experiments is a reliable and precise method to analyze the redistribution of isotope label in a metabolic network. Here we describe the use of the CORRECTOR program, which utilizes matrix calculations to correct mass spectral data from stable isotope labelling experiments for the distorting effect of naturally occurring stable isotopes (NOIs). CORRECTOR facilitates and speeds up the routine quantification of experimentally introduced isotope label from multiple mass spectral readouts, which are generated by routine metabolite profiling when combined with stable isotope labelling experiments.

  20. On the classification of complex vector bundles of stable rank

    Indian Academy of Sciences (India)

    , the tuples of cohomology classes on a compact, complex manifold, corresponding to the Chern classes of a complex vector bundle of stable rank. This classification becomes more effective on generalized flag manifolds, where the Lie ...

  1. Comparing Fr\\'echet and positive stable laws

    OpenAIRE

    Simon, Thomas

    2013-01-01

    Let ${\\bf L}$ be the unit exponential random variable and ${\\bf Z}_\\alpha$ the standard positive $\\alpha$-stable random variable. We prove that $\\{(1-\\alpha) \\alpha^{\\gamma_\\alpha} {\\bf Z}_\\alpha^{-\\gamma_\\alpha}, 0< \\alpha

  2. Thermally-Stable High Strain Deployable Structures, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is for the development of a thermally-stable composite made of carbon fibers and elastomeric resin. This combination of materials will allow...

  3. Using stable isotopes to determine seabird trophic relationships

    Science.gov (United States)

    Hobson, Keith A.; Piatt, John F.; Pitocchelli, Jay

    1994-01-01

    1. The stable isotopes of nitrogen (δ15N) and carbon (δ13C) were analysed in 22 species of marine birds from coastal waters of the northeast Pacific Ocean. Analyses confirm that stable nitrogen isotopes can predict seabird trophic positions.2. Based on δ15N analyses, seabird trophic-level inferences generally agree with those of conventional dietary studies, but suggest that lower trophic-level organisms are more important to several seabirds than was recognized previously.3. Stable-carbon isotope analysis may be a good indicator of inshore vs. offshore feeding preference.4. In general, stable-isotope analysis to determine trophic level offers many advantages over conventional dietary approaches since trophic inferences are based on time-integrated estimates of assimilated and not just ingested foods, and isotopic abundance represents a continuous variable that is amenable to statistical analysis.

  4. STABLE ISOTOPES IN ECOLOGICAL STUDIES: NEW DEVELOPMENTS IN MIXING MODELS

    Science.gov (United States)

    Stable isotopes are increasingly being used as tracers in ecological studies. One application uses isotopic ratios to quantify the proportional contributions of multiple sources to a mixture. Examples include food sources for animals, water sources for plants, pollution sources...

  5. Stable isotope views on ecosystem function: challenging or challenged?

    Science.gov (United States)

    Resco, Víctor; Querejeta, José I.; Ogle, Kiona; Voltas, Jordi; Sebastià, Maria-Teresa; Serrano-Ortiz, Penélope; Linares, Juan C.; Moreno-Gutiérrez, Cristina; Herrero, Asier; Carreira, José A.; Torres-Cañabate, Patricia; Valladares, Fernando

    2010-01-01

    Stable isotopes and their potential for detecting various and complex ecosystem processes are attracting an increasing number of scientists. Progress is challenging, particularly under global change scenarios, but some established views have been challenged. The IX meeting of the Spanish Association of Terrestrial Ecology (AAET, Úbeda, 18–22 October 2009) hosted a symposium on the ecology of stable isotopes where the linear mixing model approach of partitioning sinks and sources of carbon and water fluxes within an ecosystem was challenged, and new applications of stable isotopes for the study of plant interactions were evaluated. Discussion was also centred on the need for networks that monitor ecological processes using stable isotopes and key ideas for fostering future research with isotopes. PMID:20015858

  6. US ITASE Stable Isotope Data, Antarctica, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set includes stable isotope measurements from snow pits, firn, and ice cores collected by the the US component of the International Trans-Antarctic...

  7. A stable isotopic study of the diet of Potamonautes sidneyi ...

    African Journals Online (AJOL)

    Natal, South Africa. Recent flood events in the iSimangaliso Wetland Park have allowed a substantial range expansion of this species, including previously hypersaline and desiccated areas. A stable isotope study was conducted to examine ...

  8. Stable isotopes: essential tools in biological and medical research

    Energy Technology Data Exchange (ETDEWEB)

    Klein, P. D.; Hachey, D. L.; Kreek, M. J.; Schoeller, D. A.

    1977-01-01

    Recent developments in the use of the stable isotopes, /sup 13/C, /sup 15/N, /sup 17/O, and /sup 18/O, as tracers in research studies in the fields of biology, medicine, pharmacology, and agriculture are briefly reviewed. (CH)

  9. [Fractionation of hydrogen stable isotopes in the human body].

    Science.gov (United States)

    Siniak, Iu E; Grigor'ev, A I; Skuratov, V M; Ivanova, S M; Pokrovskiĭ, B G

    2006-01-01

    Fractionation of hydrogen stable isotopes was studied in 9 human subjects in a chamber with normal air pressure imitating a space cabin. Mass-spectrometry of isotopes in blood, urine, saliva, and potable water evidenced increases in the contents of heavy H isotope (deuterium) in the body liquids as compared with water. These results support one of the theories according to which the human organism eliminates heavy stable isotopes of biogenous chemical elements.

  10. Stable isotopes in pharmacology studies: present and future

    International Nuclear Information System (INIS)

    Browne, T.R.

    1986-01-01

    Stable-isotope techniques offer advantages over older methods in safety, sensitivity, specificity, and reduction in numbers of subjects required and analytic determinations for some types of pharmacology studies. In addition to their use as internal standards in gas chromatography-mass spectrometry analytic methods, stable isotopes have been successfully employed in studies of absorption, bioavailability, distribution, biotransformation, excretion, metabolite identification, time-dependent and dose-dependent pharmacokinetic changes, drug interactions, pharmacologic changes during pregnancy, mutagenicity, and teratogenicity. 32 references

  11. Elastic Stable Intramedullary Nailing for Treatment of Pediatric Tibial Fractures

    OpenAIRE

    Sandeep Gurung; Dipendra KC; Roshni Khatri

    2016-01-01

    Introduction: Tibia fractures in the skeletally immature patient can usually be treated with above knee cast or patellar tendon bearing cast. The purpose of our study was to evaluate epidemiology and outcome of Elastic stable intramedullary nailing fixation of pediatric tibial shaft fractures treated at our institution. Methods: Over a period of one year, fifty pediatric patients of tibial shaft fractures, with average age of 9.68 yr (SD=2.37), were treated with elastic stable intramedul...

  12. The stable stiffness triangle - drained sand during deformation cycles

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2017-01-01

    Cyclic, drained sand stiffness was observed using the Danish triaxial appa- ratus. New, deformation dependant soil property (the stable stiffness triangle) was detected. Using the the stable stiffness triangle, secant stiffness of drained sand was plausible to predict (and control) even during ir...... findings can find application in off-shore, seismic and other engi- neering practice, or inspire new branches of research and modelling wherever dynamic, cyclic or transient loaded sand is encountered....

  13. Risk following hospitalization in stable chronic systolic heart failure

    DEFF Research Database (Denmark)

    Abrahamsson, Putte; Swedberg, Karl; Borer, Jeffrey S

    2013-01-01

    We explored the impact of being hospitalized due to worsening heart failure (WHF) or a myocardial infarction (MI) on subsequent mortality in a large contemporary data set of patients with stable chronic systolic heart failure (HF).......We explored the impact of being hospitalized due to worsening heart failure (WHF) or a myocardial infarction (MI) on subsequent mortality in a large contemporary data set of patients with stable chronic systolic heart failure (HF)....

  14. A parallel approach to the stable marriage problem

    DEFF Research Database (Denmark)

    Larsen, Jesper

    1997-01-01

    This paper describes two parallel algorithms for the stable marriage problem implemented on a MIMD parallel computer. The algorithms are tested against sequential algorithms on randomly generated and worst-case instances. The results clearly show that the combination fo a very simple problem...... and a commercial MIMD system results in parallel algorithms which are not competitive with sequential algorithms wrt. practical performance. 1 Introduction In 1962 the Stable Marriage Problem was....

  15. Wideband quin-stable energy harvesting via combined nonlinearity

    Directory of Open Access Journals (Sweden)

    Chen Wang

    2017-04-01

    Full Text Available In this work, we propose a wideband quintuple-well potential piezoelectric-based vibration energy harvester using a combined nonlinearity: the magnetic nonlinearity induced by magnetic force and the piecewise-linearity produced by mechanical impact. With extra stable states compared to other multi-stable harvesters, the quin-stable harvester can distribute its potential energy more uniformly, which provides shallower potential wells and results in lower excitation threshold for interwell motion. The mathematical model of this quin-stable harvester is derived and its equivalent piecewise-nonlinear restoring force is measured in the experiment and identified as piecewise polynomials. Numerical simulations and experimental verifications are performed in different levels of sinusoid excitation ranging from 1 to 25 Hz. The results demonstrate that, with lower potential barriers compared with tri-stable counterpart, the quin-stable arrangement can escape potential wells more easily for doing high-energy interwell motion over a wider band of frequencies. Moreover, by utilizing the mechanical stoppers, this harvester can produce significant output voltage under small tip deflections, which results in a high power density and is especially suitable for a compact MEMS approach.

  16. Medieval horse stable; the results of multi proxy interdisciplinary research.

    Science.gov (United States)

    Dejmal, Miroslav; Lisá, Lenka; Fišáková Nývltová, Miriam; Bajer, Aleš; Petr, Libor; Kočár, Petr; Kočárová, Romana; Nejman, Ladislav; Rybníček, Michal; Sůvová, Zdenka; Culp, Randy; Vavrčík, Hanuš

    2014-01-01

    A multi proxy approach was applied in the reconstruction of the architecture of Medieval horse stable architecture, the maintenance practices associated with that structure as well as horse alimentation at the beginning of 13th century in Central Europe. Finally, an interpretation of the local vegetation structure along Morava River, Czech Republic is presented. The investigated stable experienced two construction phases. The infill was well preserved and its composition reflects maintenance practices. The uppermost part of the infill was composed of fresh stabling, which accumulated within a few months at the end of summer. Horses from different backgrounds were kept in the stable and this is reflected in the results of isotope analyses. Horses were fed meadow grasses as well as woody vegetation, millet, oat, and less commonly hemp, wheat and rye. Three possible explanations of stable usage are suggested. The stable was probably used on a temporary basis for horses of workers employed at the castle, courier horses and horses used in battle.

  17. Medieval Horse Stable; The Results of Multi Proxy Interdisciplinary Research

    Science.gov (United States)

    Dejmal, Miroslav; Lisá, Lenka; Fišáková Nývltová, Miriam; Bajer, Aleš; Petr, Libor; Kočár, Petr; Kočárová, Romana; Nejman, Ladislav; Rybníček, Michal; Sůvová, Zdenka; Culp, Randy; Vavrčík, Hanuš

    2014-01-01

    A multi proxy approach was applied in the reconstruction of the architecture of Medieval horse stable architecture, the maintenance practices associated with that structure as well as horse alimentation at the beginning of 13th century in Central Europe. Finally, an interpretation of the local vegetation structure along Morava River, Czech Republic is presented. The investigated stable experienced two construction phases. The infill was well preserved and its composition reflects maintenance practices. The uppermost part of the infill was composed of fresh stabling, which accumulated within a few months at the end of summer. Horses from different backgrounds were kept in the stable and this is reflected in the results of isotope analyses. Horses were fed meadow grasses as well as woody vegetation, millet, oat, and less commonly hemp, wheat and rye. Three possible explanations of stable usage are suggested. The stable was probably used on a temporary basis for horses of workers employed at the castle, courier horses and horses used in battle. PMID:24670874

  18. Stable Fly, Stomoxys calcitrans (L.), Dispersal and Governing Factors.

    Science.gov (United States)

    Showler, Allan T; Osbrink, Weste L A

    2015-01-01

    Although the movement of stable fly, Stomoxys calcitrans (L.), has been studied, its extent and significance has been uncertain. On a local scale (fly movement occurs between host animals and resting sites to feed and mate, mainly at on-farm locations where herbivorous livestock regularly congregate. Small numbers emigrate from livestock congregation sites in search of other hosts and oviposition substrate, mostly within stable flies are active year-round in warm latitudes, cold winters in temperate areas result in substantial population and activity declines, limiting movement of any sort to warmer seasons. Long-distance dispersal (>13 km) is mainly wind-driven by weather fronts that carry stable flies from inland farm areas for up to 225 km to beaches of northwestern Florida and Lake Superior. Stable flies can reproduce for a short time each year in washed-up sea grass, but the beaches are not conducive to establishment. Such movement is passive and does not appear to be advantageous to stable fly's survival. On a regional scale, stable flies exhibit little genetic differentiation, and on the global scale, while there might be more than one "lineage", the species is nevertheless considered to be panmictic. Population expansion across much of the globe likely occurred from the late Pleistocene to the early Holocene in association with the spread of domesticated nomad livestock and particularly with more sedentary, penned livestock.

  19. Metal stable isotope signatures as tracers in environmental geochemistry.

    Science.gov (United States)

    Wiederhold, Jan G

    2015-03-03

    The biogeochemical cycling of metals in natural systems is often accompanied by stable isotope fractionation which can now be measured due to recent analytical advances. In consequence, a new research field has emerged over the last two decades, complementing the traditional stable isotope systems (H, C, O, N, S) with many more elements across the periodic table (Li, B, Mg, Si, Cl, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn, Ge, Se, Br, Sr, Mo, Ag, Cd, Sn, Sb, Te, Ba, W, Pt, Hg, Tl, U) which are being explored and potentially applicable as novel geochemical tracers. This review presents the application of metal stable isotopes as source and process tracers in environmental studies, in particular by using mixing and Rayleigh model approaches. The most important concepts of mass-dependent and mass-independent metal stable isotope fractionation are introduced, and the extent of natural isotopic variations for different elements is compared. A particular focus lies on a discussion of processes (redox transformations, complexation, sorption, precipitation, dissolution, evaporation, diffusion, biological cycling) which are able to induce metal stable isotope fractionation in environmental systems. Additionally, the usefulness and limitations of metal stable isotope signatures as tracers in environmental geochemistry are discussed and future perspectives presented.

  20. Medieval horse stable; the results of multi proxy interdisciplinary research.

    Directory of Open Access Journals (Sweden)

    Miroslav Dejmal

    Full Text Available A multi proxy approach was applied in the reconstruction of the architecture of Medieval horse stable architecture, the maintenance practices associated with that structure as well as horse alimentation at the beginning of 13th century in Central Europe. Finally, an interpretation of the local vegetation structure along Morava River, Czech Republic is presented. The investigated stable experienced two construction phases. The infill was well preserved and its composition reflects maintenance practices. The uppermost part of the infill was composed of fresh stabling, which accumulated within a few months at the end of summer. Horses from different backgrounds were kept in the stable and this is reflected in the results of isotope analyses. Horses were fed meadow grasses as well as woody vegetation, millet, oat, and less commonly hemp, wheat and rye. Three possible explanations of stable usage are suggested. The stable was probably used on a temporary basis for horses of workers employed at the castle, courier horses and horses used in battle.

  1. Stable and sporadic symbiotic communities of coral and algal holobionts

    Science.gov (United States)

    Hester, Eric R; Barott, Katie L; Nulton, Jim; Vermeij, Mark JA; Rohwer, Forest L

    2016-01-01

    Coral and algal holobionts are assemblages of macroorganisms and microorganisms, including viruses, Bacteria, Archaea, protists and fungi. Despite a decade of research, it remains unclear whether these associations are spatial–temporally stable or species-specific. We hypothesized that conflicting interpretations of the data arise from high noise associated with sporadic microbial symbionts overwhelming signatures of stable holobiont members. To test this hypothesis, the bacterial communities associated with three coral species (Acropora rosaria, Acropora hyacinthus and Porites lutea) and two algal guilds (crustose coralline algae and turf algae) from 131 samples were analyzed using a novel statistical approach termed the Abundance-Ubiquity (AU) test. The AU test determines whether a given bacterial species would be present given additional sampling effort (that is, stable) versus those species that are sporadically associated with a sample. Using the AU test, we show that coral and algal holobionts have a high-diversity group of stable symbionts. Stable symbionts are not exclusive to one species of coral or algae. No single bacterial species was ubiquitously associated with one host, showing that there is not strict heredity of the microbiome. In addition to the stable symbionts, there was a low-diversity community of sporadic symbionts whose abundance varied widely across individual holobionts of the same species. Identification of these two symbiont communities supports the holobiont model and calls into question the hologenome theory of evolution. PMID:26555246

  2. Feasibility study of Anti-MUC1 aptamer use as vector target director of 1,10 phenantrolin for radiosensitization of breast cancer cells; Estudo da viabilidade do uso do aptâmero Anti-MUC1 como vetor alvo direcionador de 1,10 fenantrolina para radio sensibilização de células de câncer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Laís Nascimento

    2017-07-01

    With the rising incidence of cancer and this disease as global public health dilemma, there is an alarming need of studying new cancer therapies. To achieve the development of efficient agents is essential to understand the fundamental mechanisms of carcinogenesis and tumor progression. Overexpression of proteins in malignant tissues, in contrast to expression of the proteins found in normal tissues of the same organ, is crucially important and of great interest for the characterization of potential tumor biomarkers. Following this premise, MUC1 glycoprotein was selected as a therapeutic target in a breast cancer model. In order to determine the viability of the aptA aptamer as radiosensitizers carrier, the toxic compound 1,10 phenanthroline, complexed with Fe(II) was intercalated in the aptamers. The dissociation constant was found at a value of Kd = 30 μM. The selective binding and internalization of the compound was demonstrated. Based on these data, the aptA can be used as carrying vector of molecules such as 1,10-phenanthroline. As a next stage, the evaluation of its in vitro potential as radiosensitizers with the use of ionizing radiation will be done. (author)

  3. Multi-stable perception balances stability and sensitivity

    Directory of Open Access Journals (Sweden)

    Alexander ePastukhov

    2013-03-01

    Full Text Available We report that multi-stable perception operates in a consistent, dynamical regime, balancing the conflicting goals of stability and sensitivity. When a multi-stable visual display is viewed continuously, its phenomenal appearance reverses spontaneously at irregular intervals. We characterized the perceptual dynamics of individual observers in terms of four statistical measures: the distribution of dominance times (mean and variance and the novel, subtle dependence on prior history (correlation and time-constant.The dynamics of multi-stable perception is known to reflect several stabilizing and destabilizing factors. Phenomenologically, its main aspects are captured by a simplistic computational model with competition, adaptation, and noise. We identified small parameter volumes (~3% of the possible volume in which the model reproduced both dominance distribution and history-dependence of each observer. For 21 of 24 data sets, the identified volumes clustered tightly (~15% of the possible volume, revealing a consistent `operating regime' of multi-stable perception. The `operating regime' turned out to be marginally stable or, equivalently, near the brink of an oscillatory instability. The chance probability of the observed clustering was <0.02.To understand the functional significance of this empirical `operating regime', we compared it to the theoretical `sweet spot' of the model. We computed this `sweet spot' as the intersection of the parameter volumes in which the model produced stable perceptual outcomes and in which it was sensitive to input modulations. Remarkably, the empirical `operating regime' proved to be largely coextensive with the theoretical `sweet spot'. This demonstrated that perceptual dynamics was not merely consistent but also functionally optimized (in that it balances stability with sensitivity. Our results imply that multi-stable perception is not a laboratory curiosity, but reflects a functional optimization of perceptual

  4. Introducing fecal stable isotope analysis in primate weaning studies.

    Science.gov (United States)

    Reitsema, Laurie J

    2012-10-01

    This research investigates the potential of a new, noninvasive method for determining age of weaning among primates using stable carbon and nitrogen isotope ratios in feces. Analysis of stable isotope ratios in body tissues is a well-established method in archeology and ecology for reconstructing diet. This is the first study to investigate weaning in primates using fecal stable isotope ratios. Diets of a single François' langur (Trachypithecus francoisi) mother-infant pair at the Toledo Zoo are reconstructed using this technique to track changes in infant suckling behavior over the weaning period. Stable isotope ratios in feces are sampled instead of more traditional samples such as bone or hair to enable daily, noninvasive snapshots of weaning status. Isotopic assessments of weaning status are compared to visual assessments to identify any discordance between the two. Three measurements documented the transition from breast milk to solid foods: stable carbon isotope ratios (δ(13)C), stable nitrogen isotope ratios (δ(15)N), and nitrogen content of feces (%N). It appears that solid foods were introduced at approximately 2 months of infant age, but that nursing continued into the 12th month, when sample collection ceased. Stable isotope data exposed a much longer weaning period than what was expected based on previously published data for captive langurs, and clarified visual estimates of weaning status. This reflects the method's sensitivity to suckling at night and ability to distinguish actual nursing from comfort nursing. After testing this method with zoo animals, it can readily be applied among wild populations. An isotopic approach to weaning provides a new, accurate, and biologically meaningful assessment of interbirth intervals, and facilitates a better understanding of mother-infant interactions. Both of these outcomes are critical for developing successful conservation strategies for captive and wild primates. © 2012 Wiley Periodicals, Inc.

  5. Dynamics and control of twisting bi-stable structures

    Science.gov (United States)

    Arrieta, Andres F.; van Gemmeren, Valentin; Anderson, Aaron J.; Weaver, Paul M.

    2018-02-01

    Compliance-based morphing structures have the potential to offer large shape adaptation, high stiffness and low weight, while reducing complexity, friction, and scalability problems of mechanism based systems. A promising class of structure that enables these characteristics are multi-stable structures given their ability to exhibit large deflections and rotations without the expensive need for continuous actuation, with the latter only required intermittently. Furthermore, multi-stable structures exhibit inherently fast response due to the snap-through instability governing changes between stable states, enabling rapid configuration switching between the discrete number of programmed shapes of the structure. In this paper, the design and utilisation of the inherent nonlinear dynamics of bi-stable twisting I-beam structures for actuation with low strain piezoelectric materials is presented. The I-beam structure consists of three compliant components assembled into a monolithic single element, free of moving parts, and showing large deflections between two stable states. Finite element analysis is utilised to uncover the distribution of strain across the width of the flange, guiding the choice of positioning for piezoelectric actuators. In addition, the actuation authority is maximised by calculating the generalised coupling coefficient for different positions of the piezoelectric actuators. The results obtained are employed to tailor and test I-beam designs exhibiting desired large deflection between stable states, while still enabling the activation of snap-through with the low strain piezoelectric actuators. To this end, the dynamic response of the I-beams to piezoelectric excitation is investigated, revealing that resonant excitations are insufficient to dynamically trigger snap-through. A novel bang-bang control strategy, which exploits the nonlinear dynamics of the structure successfully triggers both single and constant snap-through between the stable states

  6. Book review: Use of Stable Iodine in Nuclear Emergencies

    Directory of Open Access Journals (Sweden)

    Iraj Nabipour

    2011-11-01

    Full Text Available Following a radiological or nuclear event, radioactive iodine may be get into the body through respiratory or gastrointestinal systems. In the contaminated cases with radioactive iodine, the radioactive iodine absorbed by the thyroid can injure the gland. Because of the carcinogenic effects of its radiation, there is a significant public health risk in the event of exposure to radioactive iodine. On other hand, due to stable (non-radioactive iodine acts to block radioactive iodine from being taken into the thyroid gland, it can help protect this gland from injury and following side effects. In this query, potassium iodide (also called KI is a salt of stable iodine in a medicine form which is recommended to use sine many years ago. With effective planning and the use of stable iodine prophylaxis, accompanied with other protective implementations, this risk is mostly avoidable. This book contains information such as iodine and physiology kinetic , exposure risk to radioactive iodine, how to use stable iodine in this events , complications attributed to stable(non-radioactive iodine and also at last chapter the final recommendation published by WHO is included.

  7. Stable Isotope Ratios as Biomarkers of Diet for Health Research.

    Science.gov (United States)

    O'Brien, Diane M

    2015-01-01

    Diet is a leading modifiable risk factor for chronic disease, but it remains difficult to measure accurately due to the error and bias inherent in self-reported methods of diet assessment. Consequently, there is a pressing need for more objective biomarkers of diet for use in health research. The stable isotope ratios of light elements are a promising set of candidate biomarkers because they vary naturally and reproducibly among foods, and those variations are captured in molecules and tissues with high fidelity. Recent studies have identified valid isotopic measures of short- and long-term sugar intake, meat intake, and fish intake in specific populations. These studies provide a strong foundation for validating stable isotopic biomarkers in the general US population. Approaches to improve specificity for specific foods are needed; for example, by modeling intake using multiple stable isotope ratios or by isolating and measuring specific molecules linked to foods of interest.

  8. Design of partially optically stable reflector systems and prisms

    Science.gov (United States)

    Tsai, Chuang-Yu

    2010-09-01

    The characteristics and design method of the total optically stable (TOS) reflector systems/prisms were introduced in an early paper (Tsai and Lin in Appl. Opt. 47:4158-4163, 2008), where only two types of TOS reflector system exist, namely preservation or retroreflection. In this paper, we introduce the partially optically stable (POS) reflector system, which is only optically stable about a specific directional vector; nevertheless, the exiting light ray is not restricted to preservation or retroreflection. The proposed paper also presents an analytic method for the design of POS reflector systems comprised of multiple reflectors. Furthermore, it is shown that a POS prism can be obtained by adding two refracting flat boundary surfaces with specific conditions at the entrance and exit positions of the light ray in an optical system with multiple reflectors.

  9. Picosecond pulse generated supercontinuum as a stable seed for OPCPA.

    Science.gov (United States)

    Indra, Lukáš; Batysta, František; Hříbek, Petr; Novák, Jakub; Hubka, Zbyněk; Green, Jonathan T; Antipenkov, Roman; Boge, Robert; Naylon, Jack A; Bakule, Pavel; Rus, Bedřich

    2017-02-15

    We present a stable supercontinuum (SC) generated in a bulk YAG crystal, pumped by 3 ps chirped pulses at 1030 nm. The SC is generated in a loose focus geometry in a 13 cm long YAG crystal, allowing for stable and robust single-filament generation. The SC energy stability exceeds that of the pump laser by almost a factor of 3. Additionally, we show that the SC spectrum has long-term stability and that the SC is coherent and compressible by compressing the portions of SC spectra close to the corresponding Fourier limit. This makes the picosecond-pulse-driven SC a suitable stable seed for OPCPA amplifiers.

  10. Self-similar anomalous diffusion and Levy-stable laws

    International Nuclear Information System (INIS)

    Uchaikin, Vladimir V

    2003-01-01

    Stochastic principles for constructing the process of anomalous diffusion are considered, and corresponding models of random processes are reviewed. The self-similarity and the independent-increments principles are used to extend the notion of diffusion process to the class of Levy-stable processes. Replacing the independent-increments principle with the renewal principle allows us to take the next step in generalizing the notion of diffusion, which results in fractional-order partial space-time differential equations of diffusion. Fundamental solutions to these equations are represented in terms of stable laws, and their relationship to the fractality and memory of the medium is discussed. A new class of distributions, called fractional stable distributions, is introduced. (reviews of topical problems)

  11. Stable solitons of quadratic ginzburg-landau equations

    Science.gov (United States)

    Crasovan; Malomed; Mihalache; Mazilu; Lederer

    2000-07-01

    We present a physical model based on coupled Ginzburg-Landau equations that supports stable temporal solitary-wave pulses. The system consists of two parallel-coupled cores, one having a quadratic nonlinearity, the other one being effectively linear. The former core is active, with bandwidth-limited amplification built into it, while the latter core has only losses. Parameters of the model can be easily selected so that the zero background is stable. The model has nongeneric exact analytical solutions in the form of solitary pulses ("dissipative solitons"). Direct numerical simulations, using these exact solutions as initial configurations, show that they are unstable; however, the evolution initiated by the exact unstable solitons ends up with nontrivial stable localized pulses, which are very robust attractors. Direct simulations also demonstrate that the presence of group-velocity mismatch (walkoff) between the two harmonics in the active core makes the pulses move at a constant velocity, but does not destabilize them.

  12. Do planetary seasons play a role in attaining stable climates?

    Science.gov (United States)

    Olsen, Kasper Wibeck; Bohr, Jakob

    2018-02-01

    A simple phenomenological account for planetary climate instabilities is presented. The description is based on the standard model where the balance of incoming stellar radiation and outward thermal radiation is described by the effective planet temperature. Often, it is found to have three different points, or temperatures, where the influx of radiation is balanced with the out-flux, even with conserved boundary conditions. Two of these points are relatively long-term stable, namely the point corresponding to a cold climate and the point corresponding to a hot climate. In a classical sense these points are equilibrium balance points. The hypothesis promoted in this paper is the possibility that the intermediate third point can become long-term stable by being driven dynamically. The initially unstable point is made relatively stable over a long period by the presence of seasonal climate variations.

  13. Embedded Controller Design for Pig Stable Ventilation Systems

    DEFF Research Database (Denmark)

    Jessen, Jan Jacob

    present an early result for performing system identification for zone based climate dynamics, based on an idea of guaranteed internal flow directions. Paper 6 presents a verified stable distributed temperature controller for pig stables divided into zones. Paper 7 is an expanded journal version of paper 6......This thesis focuses on zone based climate control in pig stables and how to implement climate controllers in a new range of products. The presented controllers are based on simple models of climate dynamics and simple models of actuators. The implementation uses graphical point and click features...... from the Mathworks' range of products and automatic code generation. It is furthermore shown how to build new climate control systems based on cheap and readily available hardware and software. An early result for performing system identification for zone based climate dynamics is also presented...

  14. Ranking stability and super-stable nodes in complex networks.

    Science.gov (United States)

    Ghoshal, Gourab; Barabási, Albert-László

    2011-07-19

    Pagerank, a network-based diffusion algorithm, has emerged as the leading method to rank web content, ecological species and even scientists. Despite its wide use, it remains unknown how the structure of the network on which it operates affects its performance. Here we show that for random networks the ranking provided by pagerank is sensitive to perturbations in the network topology, making it unreliable for incomplete or noisy systems. In contrast, in scale-free networks we predict analytically the emergence of super-stable nodes whose ranking is exceptionally stable to perturbations. We calculate the dependence of the number of super-stable nodes on network characteristics and demonstrate their presence in real networks, in agreement with the analytical predictions. These results not only deepen our understanding of the interplay between network topology and dynamical processes but also have implications in all areas where ranking has a role, from science to marketing.

  15. Source Partitioning Using Stable Isotopes: Coping with Too Much Variation

    Science.gov (United States)

    Parnell, Andrew C.; Inger, Richard; Bearhop, Stuart; Jackson, Andrew L.

    2010-01-01

    Background Stable isotope analysis is increasingly being utilised across broad areas of ecology and biology. Key to much of this work is the use of mixing models to estimate the proportion of sources contributing to a mixture such as in diet estimation. Methodology By accurately reflecting natural variation and uncertainty to generate robust probability estimates of source proportions, the application of Bayesian methods to stable isotope mixing models promises to enable researchers to address an array of new questions, and approach current questions with greater insight and honesty. Conclusions We outline a framework that builds on recently published Bayesian isotopic mixing models and present a new open source R package, SIAR. The formulation in R will allow for continued and rapid development of this core model into an all-encompassing single analysis suite for stable isotope research. PMID:20300637

  16. Stable Isotope Ratios as Biomarkers of Diet for Health Research

    Science.gov (United States)

    O’Brien, Diane M.

    2016-01-01

    Diet is a leading modifiable risk factor for chronic disease, but it remains difficult to measure accurately due to the error and bias inherent in self-reported methods of diet assessment. Consequently there is a pressing need for more objective biomarkers of diet for use in health research. The stable isotope ratios of light elements are a promising set of candidate biomarkers because they vary naturally and reproducibly among foods, and those variations are captured in molecules and tissues with high fidelity. Recent studies have identified valid isotopic measures of short and long-term sugar intake, meat intake, and fish intake in specific populations. These studies provide a strong foundation for validating stable isotopic biomarkers in the general United States population. Approaches to improve specificity for specific foods are needed, for example, by modeling intake using multiple stable isotope ratios, or by isolating and measuring specific molecules linked to foods of interest. PMID:26048703

  17. Application of enriched stable isotopes as tracers in biological systems

    DEFF Research Database (Denmark)

    Stürup, Stefan; Hansen, Helle Rüsz; Gammelgaard, Bente

    2008-01-01

    The application of enriched stable isotopes of minerals and trace elements as tracers in biological systems is a rapidly growing research field that benefits from the many new developments in inorganic mass spectrometric instrumentation, primarily within inductively coupled plasma mass spectrometry...... (ICP-MS) instrumentation, such as reaction/collision cell ICP-MS and multicollector ICP-MS with improved isotope ratio measurement and interference removal capabilities. Adaptation and refinement of radioisotope tracer experiment methodologies for enriched stable isotope experiments......, and the development of new methodologies coupled with more advanced compartmental and mathematical models for the distribution of elements in living organisms has enabled a broader use of enriched stable isotope experiments in the biological sciences. This review discusses the current and future uses of enriched...

  18. Leaf water stable isotopes and water transport outside the xylem.

    Science.gov (United States)

    Barbour, M M; Farquhar, G D; Buckley, T N

    2017-06-01

    How water moves through leaves, and where the phase change from liquid to vapour occurs within leaves, remain largely mysterious. Some time ago, we suggested that the stable isotope composition of leaf water may contain information on transport pathways beyond the xylem, through differences in the development of gradients in enrichment within the various pathways. Subsequent testing of this suggestion provided ambiguous results and even questioned the existence of gradients in enrichment within the mesophyll. In this review, we bring together recent theoretical developments in understanding leaf water transport pathways and stable isotope theory to map a path for future work into understanding pathways of water transport and leaf water stable isotope composition. We emphasize the need for a spatially, anatomically and isotopically explicit model of leaf water transport. © 2016 John Wiley & Sons Ltd.

  19. High precision and stable structures for particle detectors

    CERN Document Server

    Da Mota Silva, S; Hauviller, Claude

    1999-01-01

    The central detectors used in High Energy Physics Experiments require the use of light and stable structures capable of supporting delicate and precise radiation detection elements. These structures need to be highly stable under environmental conditions where external vibrations, high radiation levels, temperature and humidity gradients should be taken into account. Their main design drivers are high dimension and dynamic stability, high stiffness to mass ratio and large radiation length. For most applications, these constraints lead us to choose Carbon Fiber Reinforced Plastics ( CFRP) as structural element. The construction of light and stable structures with CFRP for these applications can be achieved by careful design engineering and further confirmation at the prototyping phase. However, the experimental environment can influence their characteristics and behavior. In this case, theuse of adaptive structures could become a solution for this problem. We are studying structures in CFRP with bonded piezoel...

  20. Stable isotope tracers and exercise physiology: past, present and future.

    Science.gov (United States)

    Wilkinson, Daniel J; Brook, Matthew S; Smith, Kenneth; Atherton, Philip J

    2017-05-01

    Stable isotope tracers have been invaluable assets in physiological research for over 80 years. The application of substrate-specific stable isotope tracers has permitted exquisite insight into amino acid, fatty-acid and carbohydrate metabolic regulation (i.e. incorporation, flux, and oxidation, in a tissue-specific and whole-body fashion) in health, disease and response to acute and chronic exercise. Yet, despite many breakthroughs, there are limitations to 'substrate-specific' stable isotope tracers, which limit physiological insight, e.g. the need for intravenous infusions and restriction to short-term studies (hours) in controlled laboratory settings. In recent years significant interest has developed in alternative stable isotope tracer techniques that overcome these limitations, in particular deuterium oxide (D 2 O or heavy water). The unique properties of this tracer mean that through oral administration, the turnover and flux through a number of different substrates (muscle proteins, lipids, glucose, DNA (satellite cells)) can be monitored simultaneously and flexibly (hours/weeks/months) without the need for restrictive experimental control. This makes it uniquely suited for the study of 'real world' human exercise physiology (amongst many other applications). Moreover, using D 2 O permits evaluation of turnover of plasma and muscle proteins (e.g. dynamic proteomics) in addition to metabolomics (e.g. fluxomics) to seek molecular underpinnings, e.g. of exercise adaptation. Here, we provide insight into the role of stable isotope tracers, from substrate-specific to novel D 2 O approaches, in facilitating our understanding of metabolism. Further novel potential applications of stable isotope tracers are also discussed in the context of integration with the snowballing field of 'omic' technologies. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

  1. Target-like pigmentation after minipunch grafting in stable vitiligo

    Directory of Open Access Journals (Sweden)

    Nelee Bisen

    2014-01-01

    Full Text Available Surgical treatment for vitiligo has been ever evolving. Each surgical modality has its own benefits and limitations. Miniature punch grafting is the most extensively performed surgery, which gives good results in stable vitiligo. Herein we report an unusual type of repigmentation observed after minipunch grafting in a patient of stable vitiligo, which resembled target-like lesions with a "perigraft halo" surrounding individual grafts. Such pigment spread occurred despite the use of 0.5 mm larger graft from the donor site.

  2. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2005-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. (author). 52 refs., 11 figs., 2 tabs

  3. Coexistence of collapse and stable spatiotemporal solitons in multimode fibers

    Science.gov (United States)

    Shtyrina, Olga V.; Fedoruk, Mikhail P.; Kivshar, Yuri S.; Turitsyn, Sergei K.

    2018-01-01

    We analyze spatiotemporal solitons in multimode optical fibers and demonstrate the existence of stable solitons, in a sharp contrast to earlier predictions of collapse of multidimensional solitons in three-dimensional media. We discuss the coexistence of blow-up solutions and collapse stabilization by a low-dimensional external potential in graded-index media, and also predict the existence of stable higher-order nonlinear waves such as dipole-mode spatiotemporal solitons. To support the main conclusions of our numerical studies we employ a variational approach and derive analytically the stability criterion for input powers for the collapse stabilization.

  4. Stable propagation of interacting crack systems and modeling of damage

    International Nuclear Information System (INIS)

    Bazant, Z.P.; Tabbara, M.R.

    1989-01-01

    This paper presents general thermodynamic criteria for the stable states and stable path of structures with an interacting system of cracks. In combination with numerical finite element results for various cracked structure geometries, these criteria indicate that the crack response path of structures may exhibit bifurcations, after which the symmetry of the crack system is broken and some cracks grow preferentially. The problem is of interest for the prediction of ultimate loads, ductility and energy absorption capability of nuclear concrete structures as well as structures made of composites and ceramics

  5. Remarks on search methods for stable, massive, elementary particles

    International Nuclear Information System (INIS)

    Perl, Martin L.

    2001-01-01

    This paper was presented at the 69th birthday celebration of Professor Eugene Commins, honoring his research achievements. These remarks are about the experimental techniques used in the search for new stable, massive particles, particles at least as massive as the electron. A variety of experimental methods such as accelerator experiments, cosmic ray studies, searches for halo particles in the galaxy and searches for exotic particles in bulk matter are described. A summary is presented of the measured limits on the existence of new stable, massive particle

  6. 5-Formylcytosine can be a stable DNA modification in mammals.

    Science.gov (United States)

    Bachman, Martin; Uribe-Lewis, Santiago; Yang, Xiaoping; Burgess, Heather E; Iurlaro, Mario; Reik, Wolf; Murrell, Adele; Balasubramanian, Shankar

    2015-08-01

    5-Formylcytosine (5fC) is a rare base found in mammalian DNA and thought to be involved in active DNA demethylation. Here, we show that developmental dynamics of 5fC levels in mouse DNA differ from those of 5-hydroxymethylcytosine (5hmC), and using stable isotope labeling in vivo, we show that 5fC can be a stable DNA modification. These results suggest that 5fC has functional roles in DNA that go beyond being a demethylation intermediate.

  7. Stable three-dimensional metallic carbon with interlocking hexagons.

    Science.gov (United States)

    Zhang, Shunhong; Wang, Qian; Chen, Xiaoshuang; Jena, Puru

    2013-11-19

    Design and synthesis of 3D metallic carbon that is stable under ambient conditions has been a long-standing dream. We predict the existence of such phases, T6- and T14-carbon, consisting of interlocking hexagons. Their dynamic, mechanical, and thermal stabilities are confirmed by carrying out a variety of state-of-the-art theoretical calculations. Unlike the previously studied K4 and the simple cubic high pressure metallic phases, the structures predicted in this work are stable under ambient conditions. Equally important, they may be synthesized chemically by using benzene or polyacenes molecules.

  8. Stable patterns for fourth-order parabolic equations

    OpenAIRE

    van den Berg, J. B.; Vandervorst, R. C.

    2002-01-01

    We consider fourth-order parabolic equations of gradient type. For the sake of simplicity, the analysis is carried out for the specific equation $u\\sb t=-\\gamma\\ u\\sb {xxxx}+\\beta u\\sb {xx}-F\\sp \\prime(u)$ with $(t,x)\\in (0,\\infty)\\times(0, L)$ and $\\gamma,\\beta>0$ and where $F(u)$ is a bistable potential. We study its stable equilibria as a function of the ratio $\\gamma/beta\\sp 2$. As the ratio $\\gamma/beta\\sp 2$ crosses an explicit threshold value, the number of stable ...

  9. Thermally stable surfactants and compositions and methods of use thereof

    Science.gov (United States)

    Chaiko, David J [Woodridge, IL

    2008-09-02

    There are provided novel thermally stable surfactants for use with fillers in the preparation of polymer composites and nanocomposites. Typically, surfactants of the invention are urethanes, ureas or esters of thiocarbamic acid having a hydrocarbyl group of from 10 to 50 carbons and optionally including an ionizable or charged group (e.g., carboxyl group or quaternary amine). Thus, there are provided surfactants having Formula I: ##STR00001## wherein the variables are as defined herein. Further provided are methods of making thermally stable surfactants and compositions, including composites and nanocomposites, using fillers coated with the surfactants.

  10. Exploring cancer metabolism using stable isotope-resolved metabolomics (SIRM).

    Science.gov (United States)

    Bruntz, Ronald C; Lane, Andrew N; Higashi, Richard M; Fan, Teresa W-M

    2017-07-14

    Metabolic reprogramming is a hallmark of cancer. The changes in metabolism are adaptive to permit proliferation, survival, and eventually metastasis in a harsh environment. Stable isotope-resolved metabolomics (SIRM) is an approach that uses advanced approaches of NMR and mass spectrometry to analyze the fate of individual atoms from stable isotope-enriched precursors to products to deduce metabolic pathways and networks. The approach can be applied to a wide range of biological systems, including human subjects. This review focuses on the applications of SIRM to cancer metabolism and its use in understanding drug actions. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  11. Stable Isotope Values of Nitrogen and Carbon in Particulate ...

    Science.gov (United States)

    Data set from “Patterns in stable isotope values of nitrogen and carbon in particulate matter from the Northwest Atlantic Continental Shelf, from the Gulf of Maine to Cape Hatteras” by Oczkowski et al. These are the data upon which all results and conclusion are made. Publishing the data allow for use by wider audience. Stable isotope dynamics on the shelf can inform both nearshore and open ocean research efforts, providing an important link along the marine continuum. To our knowledge, this data set is unique in its spatial coverage and variables measured.

  12. Stable isotope customer list and summary of shipments - FY 1983

    International Nuclear Information System (INIS)

    Davis, W.C.

    1983-12-01

    This compilation is published as an aid to those concerned with the separation and sale of stable isotopes. The information is divided into four sections: (1) alphabetical list of domestic and foreign customers, showing the stable isotopes purchased during the fiscal year; (2) alphabetical list of isotopes, cross-referenced to customer numbers and divided into domestic and foreign categories; (3) alphabetical list of states and countries, cross-referenced to customer numbers and indicating geographical concentrations of isotope users; and (4) tabulation of the shipments, quantities, and dollars for domestic, foreign, and project categories for each isotope

  13. Stable isotope customer list and summary of shipments: FY 1984

    International Nuclear Information System (INIS)

    Tracy, J.G.

    1984-12-01

    This compilation is published as an aid to those concerned with the separation and sale of stable isotopes. The information is divided into four sections: (1) alphabetical list of domestic and foreign customers, showing the stable isotopes purchased during the fiscal year; (2) alphabetical list of isotopes, cross-referenced to customer numbers and divided into domestic and foreign categories; (3) alphabetical list of states and countries, cross-referenced to customer numbers and indicating geographical concentrations of isotope users; and (4) tabulation of the shipments, quantities, and dollars for domestic, foreign, and project categories for each isotope

  14. Manipulation and gender neutrality in stable marriage procedures

    OpenAIRE

    Pini, Maria; Rossi, Francesca; Venable, Brent; Walsh, Toby

    2009-01-01

    The stable marriage problem is a well-known problem of matching men to women so that no man and woman who are not married to each other both prefer each other. Such a problem has a wide variety of practical applications ranging from matching resident doctors to hospitals to matching students to schools. A well-known algorithm to solve this problem is the Gale-Shapley algorithm, which runs in polynomial time. It has been proven that stable marriage procedures can always be manipulated. Whilst ...

  15. Efficient and facile synthesis of novel stable monodeuterium labeled ractopamine.

    Science.gov (United States)

    Su, Feifei; Wu, Fulong; Tang, He; Wang, Zhonghua; Wu, Fanhong

    2015-01-01

    A novel synthetic route to stable deuterium labeled ractopamine was disclosed with 6.49% total yield and 97.7% isotopic abundance. Its structure and the isotope-abundance were confirmed according to (1)H-NMR and high-resolution mass spectrometry. Copyright © 2015 John Wiley & Sons, Ltd.

  16. Production of stable isotopes at Urenco. 10 years of progress

    International Nuclear Information System (INIS)

    Mol, C.A.; Rakhorst, H.

    2003-01-01

    In the last ten years, Urenco has built its spin-off activity of stable isotopes in a multi-million dollar business. It is a high quality, ISO certified, client oriented and profitable European business with further growth potential. (author)

  17. The stable moduli space of Riemann surfaces: Mumford's conjecture

    DEFF Research Database (Denmark)

    Madsen, I.; Weiss, Michael

    2007-01-01

    , one may replace the stable moduli space of Riemann surfaces by $B\\Gamma_{\\infty}$, where $\\Gamma_\\infty$ is the group of isotopy classes of automorphisms of a smooth oriented connected surface of ``large'' genus. Tillmann's theorem that the plus construction makes $B\\Gamma_{\\infty}$ into an infinite...

  18. Isolation and characterization of stable mutants of Streptomyces ...

    Indian Academy of Sciences (India)

    Unknown

    Department of Genetic Engineering, School of Biotechnology, Madurai Kamaraj University, Madurai 625 021, India. Abstract. Daunorubicin and its derivative doxorubicin are antitumour anthracycline antibiotics produced by Streptomyces peucetius. In this study we report isolation of stable mutants of S. peucetius blocked in ...

  19. Recent applications of stable isotopes in environmental medicine in germany

    International Nuclear Information System (INIS)

    Krumbiegel, P.; Herbarth, O.

    2000-01-01

    In the last few years, a new quality in the application of stable isotopes became manifest. It is the establishment of stable isotopes as a tool in medical routine diagnosis - a novel field of nuclear medicine - and in environmental-medical epidemiological surveys. Owing to missing suitable radioactive isotopes of the bio elements carbon and nitrogen and because of ethical problems in the human use of some radionuclides, the stable isotopes 13 C and 1% N play a key role in this new field. A review is given about four new stable isotope-aided methods for in vivo organ function test. Three of them were developed in Leipzig, germany, and one in houston/Texas. We have validated the tests and then introduced into medical and environmental routine diagnostic use: ( 15 N Methacetin and ( 13 C) methacetin liver function tests to characterize the detoxification capacity of the human liver; ( 15 N) Urea and ( 13 C) urea tests to detect the colonization of the human stomach by the bacterium helicobacter pylori. This bacterium is, as known, responsible for gastritis and ulcer of the gastrointestinal tract. The transmission ways of H. Pylori are under investigation world-wide

  20. Preparation of stable silica surfaces for surface forces measurement

    Science.gov (United States)

    Ren, Huai-Yin; Mizukami, Masashi; Kurihara, Kazue

    2017-09-01

    A surface forces apparatus (SFA) measures the forces between two surfaces as a function of the surface separation distance. It is regarded as an essential tool for studying the interactions between two surfaces. However, sample surfaces used for the conventional SFA measurements have been mostly limited to thin (ca. 2-3 μm) micas, which are coated with silver layers (ca. 50 nm) on their back, due to the requirement of the distance determination by transmission mode optical interferometry called FECO (fringes of equal chromatic order). The FECO method has the advantage of determining the absolute distance, so it should be important to increase the availability of samples other than mica, which is chemically nonreactive and also requires significant efforts for cleaving. Recently, silica sheets have been occasionally used in place of mica, which increases the possibility of surface modification. However, in this case, the silver layer side of the sheet is glued on a cylindrical quartz disc using epoxy resin, which is not stable in organic solvents and can be easily swollen or dissolved. The preparation of substrates more stable under severe conditions, such as in organic solvents, is necessary for extending application of the measurement. In this study, we report an easy method for preparing stable silica layers of ca. 2 μm in thickness deposited on gold layers (41 nm)/silica discs by sputtering, then annealed to enhance the stability. The obtained silica layers were stable and showed no swelling in organic solvents such as ethanol and toluene.

  1. Stable limits for sums of dependent infinite variance random variables

    DEFF Research Database (Denmark)

    Bartkiewicz, Katarzyna; Jakubowski, Adam; Mikosch, Thomas

    2011-01-01

    of these results are qualitative in the sense that the parameters of the limit distribution are expressed in terms of some limiting point process. In this paper we will be able to determine the parameters of the limiting stable distribution in terms of some tail characteristics of the underlying stationary...

  2. Production and use of stable isotopes in France

    International Nuclear Information System (INIS)

    Roth, E.; Letolle, R.

    1991-01-01

    This paper can not cover the field of production and use of stable isotopes in France exhaustively within six pages. We have chosen to concentrate on highlights of the subject and on recent work, and to give references for further reading. 26 refs

  3. Divergence of stable isotopes in tap water across China

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Sihan; Hu, Hongchang; Tian, Fuqiang; Tie, Qiang; Wang, Lixin; Liu, Yaling; Shi, Chunxiang

    2017-03-02

    Stable isotopes in water (e.g., δ2H and δ18O) are important indicators of hydrological and ecological patterns and processes. Tap water can reflect integrated features of regional hydrological processes and human activities. China is a large country with significant meteorological and geographical variations. This report presents the first national-scale survey of Stable Isotopes in Tap Water (SITW) across China. 780 tap water samples have been collected from 95 cities across China from December 2014 to December 2015. (1) Results yielded the Tap Water Line in China is δ2H = 7.72 δ18O + 6.57 (r2 = 0.95). (2) SITW spatial distribution presents typical "continental effect". (3) SITW seasonal variations indicate clearly regional patterns but no trends at the national level. (4) SITW can be correlated in some parts with geographic or meteorological factors. This work presents the first SITW map in China, which sets up a benchmark for further stable isotopes research across China. This is a critical step toward monitoring and investigating water resources in climate-sensitive regions, so the human-hydrological system. These findings could be used in the future to establish water management strategies at a national or regional scale. Title: Divergence of stable isotopes in tap water across China Authors: Zhao, SH; Hu, HC; Tian, FQ; Tie, Q; Wang, LX; Liu, YL; Shi, CX Source: SCIENTIFIC REPORTS, 7 10.1038/srep43653 MAR 2 2017

  4. Stable carbon and oxygen isotope study on benthic foraminifera ...

    Indian Academy of Sciences (India)

    Ajoy K Bhaumik

    2017-07-24

    Jul 24, 2017 ... Stable isotopes of benthic foraminifera have widely been applied in micropalaeontological research to understand vital effects in foraminifera. Isotopic fractionations are mainly controlled by ontogeny, bottom/pore water chemistry, habitat preference, kinetic effect and respiration. Discontinuous abundance.

  5. Stable isotope compositions of organic carbon and contents of ...

    African Journals Online (AJOL)

    The stable isotope compositions of organic carbon (OC), and contents of OC and nitrogen for four sediment cores recovered from lakes Makat (located in the Ngorongoro Crater), Ndutu and Masek (located in the Serengeti Plains) are used to document sources of organic matter (OM) and climatic changes in sub-arid ...

  6. Synthesis and characterization of stable aqueous dispersions of ...

    Indian Academy of Sciences (India)

    2.2b Preparation of aqueous graphene dispersion from graphite oxide: One hundred milligrams of the above pre- pared graphite oxide was dispersed in 100 ml of MilliQ water followed by sonication for 1 h. A clear brown coloured solution was obtained, which is the stable dispersion of GO in water. Subsequently, the pH of ...

  7. Exhaled nitric oxide in stable chronic obstructive pulmonary disease

    Directory of Open Access Journals (Sweden)

    Beg Mohammed

    2009-01-01

    Full Text Available Study Objective : The objective of the study was to test the hypothesis that fraction of exhaled nitric oxide (FENO is elevated in nonsmoking subjects with stable chronic obstructive pulmonary disease (COPD and compare it with the results in patients with asthma and a control population. Design : Cross-sectional study. Materials and Methods : Pulmonology Clinic at a University Hospital. Twenty five control subjects, 25 steroid naοve asthmatics and 14 COPD patients were studied. All the patients were nonsmokers and stable at the time of the study. All subjects completed a questionnaire and underwent spirometry. Exhaled nitric oxide was measured online by chemiluminescence, using single-breath technique. Results : All the study subjects were males. Subjects with stable COPD had significantly higher values of FENO than controls (56.54±28.01 vs 22.00±6.69; P =0.0001 but lower than the subjects with asthma (56.54±28.01 vs 84.78±39.32 P = 0.0285.The FENO values in COPD subjects were inversely related to the FEV 1 /FVC ratio. There was a significant overlap between the FENO values in COPD and the control subjects. Conclusion : There is a significant elevation in FENO in patients with stable COPD, but the elevation is less than in asthmatic subjects. Its value in clinical practice may be limited by the significant overlap with control subjects.

  8. Exhaled nitric oxide in stable chronic obstructive pulmonary disease

    Science.gov (United States)

    Beg, Mohammed F. S.; Alzoghaibi, Mohammad A.; Abba, Abdullah A.; Habib, Syed S.

    2009-01-01

    STUDY OBJECTIVE: The objective of the study was to test the hypothesis that fraction of exhaled nitric oxide (FENO) is elevated in nonsmoking subjects with stable chronic obstructive pulmonary disease (COPD) and compare it with the results in patients with asthma and a control population. DESIGN: Cross-sectional study. MATERIALS AND METHODS: Pulmonology Clinic at a University Hospital. Twenty five control subjects, 25 steroid naïve asthmatics and 14 COPD patients were studied. All the patients were nonsmokers and stable at the time of the study. All subjects completed a questionnaire and underwent spirometry. Exhaled nitric oxide was measured online by chemiluminescence, using single-breath technique. RESULTS: All the study subjects were males. Subjects with stable COPD had significantly higher values of FENO than controls (56.54±28.01 vs 22.00±6.69; P=0.0001) but lower than the subjects with asthma (56.54±28.01 vs 84.78±39.32 P=0.0285).The FENO values in COPD subjects were inversely related to the FEV1/FVC ratio. There was a significant overlap between the FENO values in COPD and the control subjects. CONCLUSION: There is a significant elevation in FENO in patients with stable COPD, but the elevation is less than in asthmatic subjects. Its value in clinical practice may be limited by the significant overlap with control subjects. PMID:19561927

  9. Using stable isotope analysis to study the diet of Gilchristella ...

    African Journals Online (AJOL)

    Using stable isotope analysis to study the diet of Gilchristella aestuaria larvae: preliminary insights into the foodwebs of six South African estuaries. ... We found a high similarity among the Kariega, Gamtoos, Great Fish and Sundays estuaries in terms of consumers and potential sources for both δ13C and δ15N signatures.

  10. Isolation and characterization of stable mutants of Streptomyces ...

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... Daunorubicin and its derivative doxorubicin are antitumour anthracycline antibiotics produced by Streptomyces peucetius. In this study we report isolation of stable mutants of S. peucetius blocked in different steps of the daunorubicin biosynthesis pathway. Mutants were screened on the basis of colony ...

  11. Adherence of mentally stable patients to antipsychotic medications ...

    African Journals Online (AJOL)

    The results of this study indicated that participants shared same viewpoints related to aspects of adherence to antipsychotic treatment; the mentally stable patients have knowledge related to the causes of mental illness; poor adherence to antipsychotic treatment results from the health seeking behaviour of the patients.

  12. Rivaroxaban with or without Aspirin in Stable Cardiovascular Disease

    NARCIS (Netherlands)

    Eikelboom, John W.; Connolly, Stuart J.; Bosch, Jackie; Dagenais, Gilles R.; Hart, Robert G.; Shestakovska, Olga; Diaz, Rafael; Alings, Marco; Lonn, Eva M.; Anand, Sonia S.; Widimsky, Petr; Hori, Masatsugu; Avezum, Alvaro; Piegas, Leopoldo S.; Branch, Kelley R. H.; Probstfield, Jeffrey; Bhatt, Deepak L.; Zhu, Jun; Liang, Yan; Maggioni, Aldo P.; Lopez-Jaramillo, Patricio; O'Donnell, Martin; Kakkar, Ajay K.; Fox, Keith A. A.; Parkhomenko, Alexander N.; Ertl, Georg; Störk, Stefan; Keltai, Matyas; Ryden, Lars; Pogosova, Nana; Dans, Antonio L.; Lanas, Fernando; Commerford, Patrick J.; Torp-Pedersen, Christian; Guzik, Tomek J.; Verhamme, Peter B.; Vinereanu, Dragos; Kim, Jae-Hyung; Tonkin, Andrew M.; Lewis, Basil S.; Felix, Camilo; Yusoff, Khalid; Steg, P. Gabriel; Metsarinne, Kaj P.; Cook Bruns, Nancy; Misselwitz, Frank; Chen, Edmond; Leong, Darryl; Yusuf, Salim; Aboyans, V.; Ha, J.; Keltai, K.; Lamy, A.; Liu, L.; Moayyedi, P.; Sharma, M.; Stoerk, S.; Varigos, J.; Bhagirath, V.; Bogaty, P.; Botto, F.; Catanese, L.; Donato Magno, J.; Fabbri, G.; Gabizon, I.; Gosselin, G.; Halon, D.; Heldmann, M.; Lamelas, P.; Lauw, M.; Leong, Y.; Liang, D.; Lutay, Y.; Maly, M.; Mikulik, R.; Nayar, S.; Ng, K.; Perera, K.; Pirvu, O.; Ronner, E.; Sato, S.; Smyth, A.; Sokolova, E.; Wiendl, M.; Winkelmann, B.; Yang, X.; Yufereva, Y.; Cairns, J.; Sleight, P.; deMets, D.; Momomura, S. I.; Prins, M. [=Martin H.; Ramsay, T.; Goto, S.; Rouleau, J. L.; Schumi, J.; Thabane, L.; Casanova, A.; Bangdiwala, S.; Deng, E.; Dyal, L.; Khatun, R.; Marsden, T.; Pogue, J.; Tang, C.; Wong, G.; Yuan, F.; Aman, S.; Ariz, A.; Ashton, H.; Belanger, J.; Belanger, M.; Brettell, K.; Chandra, J.; Choppick, C.; Cisternino, D.; Cuncins-Hearn, A.; Di Marino, M.; Diao, L.; Dwomoh, S.; Dykstra, A.; Galatsis, E.; Gasic, T.; Gutierrez, J.; Hamilton, L.; Irwin, L.; Lapensee, C.; Li, A.; Lu, X.; MacRae, L.; Malik, S.; Malvestiti, A.; Mastrangelo, J.; Maystrenko, A.; O'Donnell, L.; Reeh, K.; Szymkow, P.; Thomas, S.; Thrasher, D.; Tyrwhitt, J.; White, L.; Bastone, R.; Berkowitz, S.; Dias, A.; Ho, K.; Keller, L.; Lanius, V.; Lister, K.; Merten, C.; Muehlhofer, E.; Schmidt, K.; Tasto, C.; Tsihlias, E.; Woroniecka-Osio, A.; Orlandini, A.; Niemann, G.; Pascual, A.; Toscanelli, S.; Cabezón, M.; Debaveye, B.; Meeusen, K.; Luys, C.; Broos, K.; Vandenberghe, K.; Luyten, A.; Oliveira, G. B. F.; Vila Nova, D. C.; Konishi, M. Y. N.; Lonn, A.; Turbide, G.; Cayer, M.; Rovito, C.; Standen, D.; Li, J.; Lopez Pico, M.; Dusek, R.; Buzalka, V.; Larsen, J.; Paucar, M. J.; Saarinen, M.; Simon, T.; Bezault, M.; Le Lay, M.; Epstein, L.; Fajardo-Moser, M.; Röser, C.; Putz-Todd, G.; Scheidemantel, F.; Poehler, D.; Renner, J.; Hargitai, A.; Doherty, A. O.; Duffy, N.; Roarty, C.; Nolan, A.; Power, A.; Yuval, R.; Ben Ari, M.; Greenblatt, S.; Marmor, Y.; Lucci, D.; Ceseri, M.; Baldini, E.; Cipressa, L.; Miccoli, M.; Goto, M.; Yamasowa, H.; Kajiwara, M.; Takase, D.; Ikeguchi, K.; Matsumoto, M.; Ishii, M.; Asai, J.; Nozaki, D.; Akatsuka, T.; Yoshida, T.; Shahadan, S.; Md Nasir, N.; Schut, Astrid; Vinck, Leonie; van Leeuwen, Marjelle; Sanchez, J.; Aquino, M. R.; Mararac, T.; Benedyk, K.; Iordache, A.; Ciobanu, A.; Rimbas, R.; Dragoi Galrinho, R.; Magda, S.; Mihaila, S.; Mincu, R.; Suran, B.; Cotoban, A.; Matei, L.; Kursakov, A.; Rusnak, P.; Zakharova, A.; Demidova, E.; Commerford, A.; Lee, S.; Ju, I.; Gunolf, M.; Lorimer, A.; Parkhomenko, L.; Johnson, J.; Anderson, J.; Norby-Slycord., C.; Sala, J.; Sicer, M.; Rasmussen, M.; Luciani, C.; Cartasegna, L.; Beltrano, C.; Medek, G.; Vico, M.; Lanchiotti, P.; Martella, C.; Hominal, M.; Castoldi, M.; Casali, W.; Raimondi, S.; Hasbani, E.; Prado, A.; Paterlini, G.; Waisman, F.; Leonard, M.; Caccavo, A.; Alarcon, V.; Zaidman, C.; Guerlloy, F.; Vogel, D.; Imposti, H.; Dominguez, A.; Hrabar, A.; Fernandez, A.; Schygiel, P.; Sokn, F.; Cuneo, C.; Gutierrez Carrillo, N.; Martinez, G.; Luquez, H.; Costantino, M.; Ruiz, M.; Beccetti, N.; Mackinnon, I.; Cluigt, N.; Ahuad Guerrero, R.; Fanuele, M.; Campisi, V.; Costabel, J.; Romanelli, M.; Bartolacci, I.; Echeverria, M.; Pedrotti, M.; Montaña, O.; Camino, A.; Crespo, C.; Barbieri, M.; Lopez Santi, R.; Tonin, H.; Heffes, R.; Gomez Vilamajo, O.; Vanesio, F.; Allegrini, E.; Garcia Duran, R.; Garcia, C.; Garcia Duran, L.; Schiavi, L.; Mana, M.; Bordonava, A.; Rodriguez, M.; Gutierrez, M.; Garrido, M.; Rodriguez, C.; Ingaramo, A.; Costamagna, O.; Almagro, S.; Gerbaudo, C.; Pelagagge, M.; Bustamante Labarta, M.; Novaretto, L.; Maldini, A.; Lopez, L.; Albisu Di Gennero, J.; Ibanez Saggia, L.; Garcia Vilkas, A.; Alvarez, M.; Stoermann, W.; Vita, N.; Vottero, E.; Macin, S.; Cocco, M.; Onocko, M.; Dran, R.; Gimenez, C.; Cardona, M.; Guzman, L.; Guzman, P.; Martinez, D.; Sarjanovich, R.; Huerta, C.; Scaro, G.; Cuadrado, J.; Rodriguez, G.; Nani, S.; Guardiani, F.; Litvak Bruno, M.; Ceconi, G.; Chacon, C.; Casado, M.; Fernandez Moutin, M.; Maffei, L.; Sassone, S.; Yantorno, M.; Grinfeld, D.; Vensentini, N.; Rolandi, F.; Fallabrino, L.; Majul, C.; Paez, O.; Visser, M.; Luciardi, H.; Mansilla, V.; Gonzalez Colaso, P.; Ferre Pacora, F.; Jure, H.; Parody, M.; Espeche, E.; Whelan, A.; Boyle, A.; Collins, N.; Roberts-Thomson, P.; Rogers, J.; Caroll, P.; Colquhoun, D.; Williams, L.; Shaw, J.; Blombery, P.; Amerena, J.; Lee, C.; Hii, C.; Royse, A.; Royse, C.; Singh, B.; Selvanayagam, J.; Jansen, S.; Thompson, P.; Lo, W.; Hammett, C.; Poulter, R.; Graves, S.; Narasimhan, S.; van den Heuvel, P.; Wollaert, B.; Sinnaeve, P.; Fourneau, I.; Meuris, B.; Vanassche, T.; Ector, B.; Janssens, L.; Debonnaire, P.; Vandekerckhove, Y.; van de Borne, P.; Wautrecht, J.; Motte, S.; Leroy, J.; Schroë, H.; Vrolix, M.; Ferdinande, B.; Vranckx, P.; Benit, E.; Elegeert, I.; Lerut, P.; Wallaert, P.; Hoffer, E.; Borgoens, P.; Dujardin, K.; Brasil, C. K. O. I.; del Monaco, M. I.; Uint, L.; Pavanello, R.; Precoma, D. B.; Vianna, H. S.; Abrantes, J.; Morelli, J.; Manenti, E.; Jaeger, C.; Reis, G.; Giorgeto, F. E.; França, C. C. B.; Quadros, T. F. S.; Saraiva, J.; Costa, M.; de Camargo, O.; Marson Lopes, M.; Silva, J.; Maia, L. N.; Nakazone, M. A.; Mouco, O. M. C. C.; Lemos, M. A. B. T.; Hernandes, M. E.; Pântano, G. S.; de Castro, J. C. M.; Rossi, P. R. F.; Guedes, A. A. M.; Dos Santos, L. B.; dos Santos, F. R.; Vidotti, M. H.; Zimmermann, S. L.; Rech, R.; Nunes, C.; Abib, E.; Oliveira, K. L. C.; Leaes, P. E.; Botelho, R. V.; Navarro, A. L. C.; Silva, R. A.; Arantes, F. B. B.; Dutra, O.; Vaz, R.; Souza, W. K. S. B.; Souza, A. S. B.; Queiroz, W. C. B.; Braile, M.; Ferreira, V.; Izukawa, N. M.; Prakasan, A. K.; Nicolau, J. C.; Dalçóquio, T. F.; Tanajura, L. F. L.; Serrano, C. V.; Hueb, W. A.; Minelli, C.; Borsetti Neto, F. A.; Nasi, L. A.; Martins, S. C. O.; Oliveira, L. F. A.; Silva, M. A. V.; Ferreira, J. O.; de Carvalho Cantarelli, M. J.; Tytus, R.; Pasyk, E.; Pandey, A. S.; Rowe, A.; Cha, J.; Vizel, S.; Babapulle, M.; Semelhago, L.; Saunders, K.; Haligowski, D.; Berlingieri, J.; Nisker, W.; Kiaii, B.; Romsa, J.; Chu, M.; Nagpal, D.; Guo, R.; Mckenzie, N.; Quantz, M.; Bhargava, R.; Bhargava, M.; Mehta, P.; Hill, L.; Heslop, W.; Fell, D.; Hess, A.; Zadra, R.; Zeman, P.; Srivamadevan, M.; Lam, A.; Tai, S.; Al-Qoofi, F.; Spence, F.; Anderson, T.; Kieser, T.; Kidd, W.; Fedak, P.; Smith, E.; Har, B.; Brown, C.; Forgie, R.; Hassan, A.; Pelletier, M.; Searles, G.; Marr, D.; Bessoudo, R.; Douglas, G.; Legare, J.; Petrella, R.; Pavlosky, W.; Ricci, J.; Galiwango, P.; Janmohamed, A.; Kassam, S.; Mukherjee, A.; Vijayaraghavan, R.; Burstein, J.; D'Mello, N.; Glanz, A.; Noiseux, N.; Stevens, L. M.; Basile, F.; Prieto, I.; Normandin, L.; Helou, J.; Do, Q. B.; Bainey, K.; Tymchak, W.; Welsh, R.; Merali, F.; Pandith, V.; Heffernan, M.; Orfi, J.; Mcconachie, D.; Jedrzkiewicz, S.; Della Siega, A.; Robinson, S.; Nadra, I.; Poirier, P.; Dagenais, F.; Voisine, P.; Mohammadi, S.; Doyle, D.; Baillot, R.; Charbonneau, E.; Dumont, E.; Kalavrouziotis, D.; Perron, J.; Jacques, F.; Laflamme, M.; Brulotte, S.; Crete, M.; Degrâce, M.; Delage, F.; Grondin, F.; Lemieux, A.; Michaud, N.; Saulnier, D.; Ross, M. K.; Nguyen, M.; Harvey, R.; Daneault, B.; Hartleib, M.; Guzman, R.; Nguyen, T.; Singal, R.; Bourgeois, R.; Landry, D.; Kamel, S.; Rupka, D.; Kuritzky, R.; Khaykin, Y.; Phaneuf, D. C.; Desjardins, V.; Coll, X.; Huynh, T.; Pilon, C.; Mansour, S.; Lemire, F.; Kokis, A.; Potvin, J.; Campeau, J.; Audet, M.; Boulianne, M.; Dupuis, R.; Lauzon, C.; Pruneau, G.; Senay, B.; Pichette, F.; Cieza, T.; Breton, R.; Belisle, P.; Barabas, M.; Diaz, A.; Costa, R.; Absi, F.; Garand, M.; Rheault, A.; Lemay, C.; Gisbert, A.; Raymond, A.; Barrero, M.; Gagne, C. E.; Rheault, P.; Pepin-Dubois, Y.; Johnston, J.; Mundi, A.; Cohen, G.; Shukle, P.; Baskett, R.; Hirsch, G.; Ali, I.; Stewart, K.; Fenton, J.; Pudupakkam, S.; Willoughby, R.; Czarnecki, W.; Roy, A.; Montigny, M.; Descarries, L.; Mayrand, H.; Comtois, H.; Essiambre, R.; Ringuette, G.; Boutros, G.; Gendreau, R.; Pham, L.; Nguyen, V.; Nguyen-Thanh, H. K.; Ben-Yedder, N.; Nawaz, S.; Fremes, S.; Moussa, F.; Shukla, D.; Labonte., R.; Jano, G.; Bobadilla, B.; Saavedra, J.; Bahamondes, J.; Cobos, J.; Grunberg, E.; Corbalan, R.; Verdejo, H.; Medina, M.; Vega, M.; Nahuelpan, L.; Castañia, F.; Raffo, C.; Vargas, A.; Reyes, T.; Vargas, D.; Perez, L.; Arriagada, G.; Potthoff, S.; Godoy, J.; Stockins, B.; Larenas, G.; Quiñinao, F.; Sepulveda, P.; Trucco, V.; Pincetti, C.; Saavedra, S.; Silva, P.; Vejar, M.; Rodríguez, T.; Rodriguez, J.; Tian, H.; Zhang, J.; Meng, Y.; Wu, X.; Wu, Q.; Wang, Q.; Mu, Y.; Yang, J.; Wang, F.; Zhang, W.; Ke, Y.; Jiang, H.; Yin, P.; Jia, K.; Chen, C.; Wang, Z.; Qi, B.; Yu, L.; Feng, G.; Li, L.; Jiang, L.; Wu, S.; Yu, H.; Wu, Z.; Ding, R.; Liu, S.; Xu, H.; Cao, H.; Bai, X.; Zheng, Y.; Liu, Z.; Sun, H.; Yang, P.; Li, B.; Feng, Z.; Yang, Y.; Xu, Z.; Wu, W.; Meng, Q.; Ge, J.; Dai, Y.; Yang, H.; Chen, X.; Tian, X.; Shi, Y.; Hu, T.; Zhang, R.; Zhao, Q.; Quan, W.; Zhu, Y.; Zheng, Z.; Zhang, S.; Zhao, Y.; Zhao, C.; Wang, R.; Tao, L.; Hu, D.; Wang, Y.; Fan, F.; Huang, W.; Xia, X.; Fu, G.; Jiang, D.; Wang, M.; Li, C.; Xu, K.; Dong, Y.; Chen, Y.; Wu, D.; Wang, C.; Sun, X.; Lu, S.; Zhou, X.; Kong, Y.; Zhang, B.; Sotomayor, A.; Suarez, M.; Ripoll, D.; Herrera, O.; Accini Mendoza, J.; Saad Cure, C.; Reyes, M.; Vidal, T.; Donado Beltran, P.; Hernandez Jaimes, E.; Castillo, H.; Rocha, C.; Forero, L.; Zarate Bernal, D.; Vanstrrahle Gonzalez, L.; Urina Triana, M.; Quintero, A.; Ramirez, N.; Balaguera Mendoza, J.; Aroca Martinez, G.; Cotes, C.; Mercado, A.; Lastra Percy, X.; Perez Mayorga, M.; Rodriguez, N.; Molina de Salazar, D.; Perez Agudelo, J.; Lopez Villegas, L.; Agudelo Ramos, L.; Melo Polo, M.; Esparza Albornoz, A.; Forero Gomez, J.; Sanchez Vallejo, G.; Aristizabal, J.; Gallego, A.; Contreras, C.; Yepez, J.; Angel Escobar, J.; Manzur J, F.; Cohen, L.; Boneu, D.; Garcia Lozada, H.; Barrios, L.; Celemin, C.; Diego, M.; Garcia Ortiz, L.; Montoya, C.; Ramirez, E.; Arcos Palma, E.; Ceron, J.; Acosta, G.; Gomez Mesa, J.; Velasquez, J.; Barreto, D.; Trujillo Dada, F.; Trujillo Accini, F.; Cano, R.; Corredor de La Cruz, K.; Maria, V.; Palmera, J.; Vesga, B.; Hernandez, H.; Moreno Silgado, G.; Aruachan Vesga, S.; Burgos Martinez, E.; Quintero Villareal, G.; Solano Ayazo, F.; Porto Valiente, J.; Zidkova, E.; Krupicka, P.; Bultas, J.; Mandysova, E.; Lubanda, J.; Horak, J.; Belohlavek, J.; Kovarnik, T.; Gorican, K.; Rucka, D.; Smid, O.; Dostalova, G.; Skalicka, H.; Karetova, D.; Pavlinak, V.; Kuchynkova, S.; Marek, J.; Rob, D.; Ravlykova, K.; Prochazka, P.; Siranec, M.; Urbanec, T.; Vareka, T.; Nesvadbova, P.; Kaletova, M.; Indrakova, J.; Kryza, R.; Heczko, M.; Hanak, P.; Jancar, R.; Kocurkova, L.; Marcinek, G.; Cermak, O.; Drasnar, T.; Richter, M.; Kaspar, J.; Spinar, J.; Parenica, J.; Parenicova, I.; Schildberger, J.; Toman, O.; Ludka, O.; Poloczek, M.; Musil, V.; Miklik, R.; Labrova, R.; Lokaj, P.; Felsoci, M.; Bocek, O.; Kanovsky, J.; Zatocil, T.; Jerabek, P.; Matuska, J.; Jankovic, M.; Jankovicova, H.; Tesak, M.; Sulc, D.; Svacinova, H.; Radvan, M.; Bednar, J.; Motovska, Z.; Petr, R.; Fischerova, M.; Branny, M.; Vodzinska, A.; Cerny, J.; Indrak, J.; Sknouril, L.; Maly, J.; Vacek, T.; Prazak, O.; Broulikova, K.; Hajsl, M.; Jarkovsky, P.; Kamenik, L.; Kotik, I.; Krcova, E.; Sedlon, P.; Skvaril, J.; Cernohous, M.; Kohoutek, J.; Levcik, M.; Holek, M.; Hajdusek, P.; Foltynova Caisova, L.; Novak, V.; Kladivkova, M.; Slaby, J.; Houra, M.; Vojtisek, P.; Novotny, V.; Lazarak, T.; Pliva, M.; Pirk, J.; Barciakova, L.; Jandova, R.; Adamkova, V.; Galovcova, M.; Peterkova, L.; Turek, D.; Prochazka, J.; Belohoubek, J.; Spinarova, L.; Panovsky, R.; Novotny, P.; Krejci, J.; Hude, P.; Ozabalova, E.; Godava, J.; Honek, T.; Kincl, V.; Benesova, M.; Buckova, J.; Canadyova, J.; Mokracek, A.; Homza, M.; Stverka, P.; Florian, J.; Lukac, B.; Polasek, R.; Kucera, P.; Seiner, J.; Karasek, J.; Coufal, Z.; Stastny, J.; Cernicek, V.; Skalnikova, V.; Jiresova, E.; Brat, R.; Sieja, J.; Gloger, J.; Berger, P.; Prochazkova, I.; Samlik, J.; Brtko, M.; Tuna, M.; Polansky, P.; Omran, N.; Myjavec, A.; Hrdinova, M.; Jansky, P.; Kratochvilova, R.; Burkert, J.; Koubek, F.; Fiala, R.; Paulasova Schwabova, J.; Lindner, J.; Hlubocky, J.; Spacek, M.; Marcian, P.; Hanak, V.; Pozdisek, Z.; Lonsky, V.; Santavy, P.; Troubil, M.; Straka, Z.; Budera, P.; Fojt, R.; Talavera, D.; Tretina, M.; Nemec, P.; Orban, M.; Bedanova, H.; Wiggers, H.; Tougaard, R.; Larsen, A.; Nielsen, H.; Mattsson, N.; Gunnar, G.; Bruun, N.; Folke, F.; Soendergaard, K.; Koeber, L.; Frydland, M.; Fuchs, A.; Bang, L.; Houlind, K.; Olsen, M.; Soerensen, V.; Overgaard Andersen, U.; Dixen, U.; Refsgaard, J.; Moeller, D.; Zeuthen, E.; Lund, J.; Soegaard, P.; Jensen, S.; Duarte, Y.; Duarte, W.; Cáceres, S.; Pow Chon Long, F.; Peñaherrera, C.; Anzules, N.; Sánchez, M.; Zuleta, I.; López, J.; Villota, M.; Sánchez, H.; Perugachi, C.; Gómez, S.; Morejón, P.; Mármol, R.; Guamán, S.; Trujillo, F.; Escobar, M.; Carrera, F.; Ponce, F.; Terán, P.; Carrasco, S.; Tuomilehto, J.; Humaloja, K.; Lindberg, L.; Tuomilehto, H.; Tuominen, M.-L.; Kantola, I.; Juliard, J.; Feldman, L.; Ducrocq, G.; Boulogne, C.; Petitalot, V.; Leclercq, F.; Roubille, F.; Agullo, A.; Ferrari, E.; Chiche, O.; Moceri, P.; Boccara, F.; Charbonnier, M.; Azeddine, B.; Ederhy, S.; Soulat Dufour, L.; Cohen, A.; Etienney, A.; Messas, E.; Calvalido, A.; Galloula, A.; Zarka, S.; Courtois, M.-C.; Mismetti, P.; Accassat, S.; Buchmuller, A.; Moulin, N.; Bertoletti, L.; Seffert, B.; Sevestre, M.; Samy Modeliar Remond, S.; Dupas, S.; Mardyla, J.; Le Gloan, S.; Cayla, G.; Cornillet, L.; Schmutz, L.; Motreff, P.; Souteyrand, G.; Amonchot, A.; Barber-Charmoux, N.; Combaret, N.; Malcles, G.; Brenner, S.; Christa, M.; Duengen, H.; Krackhardt, F.; Bobenko, A.; Hashemi, D.; Stellbrink, C.; Stellbrink, E.; Köster, C.; Guerocak, O.; Bourhaial, H.; Oumbe Tiam, S.; Kemala, E.; Froemke, J.; Kadel, C.; Moellinger, H.; Friedrich, K.; Rafoud, K.; Braun-Dullaeus, R.; Herold, J.; Ganzer, M.; Jeserich, M.; Kimmel, S.; Haggenmiller, S.; Schoengart, H.; Voehringer, H.; Opitz, C.; Appel, K.; Appel, S.; Utech, A.; Finger, C.; Duersch, M.; Dorsel, T.; Wistorf, N.; Grude, M.; Nikol, S.; Ueberschaer, D.; Kast, P.; Darius, H.; Sommer, S.; Girke, F.; Oeztuerk, C.; Ranft, J.; Mikalo, A.; Schellong, S.; Voigts, B.; Mueller, C.; Jungmair, W.; Davierwala, P.; Misfeld, M.; Bomke, K.; Akhavuz, O.; Haensig, M.; Vorpahl, M.; Blem, A.; Langer, G.; Nover, I.; Koehler, T.; Bajnok, L.; Marton, Z.; Laszlo, Z.; Noori, E.; Veress, G.; Fogarassy, G.; Aradi, D.; Kelemen, B.; Vertes, A.; Davidovits, Z.; Zsary, A.; Kis, E.; Hepp, T.; Koranyi, L.; Peterfai, E.; Bezzegh, K.; Bakai, J.; Agardi, I.; Boda, Z.; Razso, K.; Poor, F.; Varallyay, Z.; Jarai, Z.; Sallai, L.; Dudas, M.; Barton, J.; Mahmood, K.; Makki, H.; McAdam, B.; Salim, T.; Murphy, A.; Crean, P.; Liddy, A. M.; Mahon, N.; Khan, I.; Hassan, S.; Curtin, R.; McFadden, E.; MacNeill, B.; Kyvelou, S.; Canavan, M.; Veerasingam, D.; Dinneen, S.; Halabi, M.; Rosenfeld, I.; Levinas, T.; Goldberg, A.; Khateeb, A.; Zimlichman, R.; Ben-Aharon, J.; Beniashvili, A.; Betsalel, A.; Zeltser, D.; Rogowski, O.; Mardi, T.; Rozenbaum, Z.; Turgeman, Y.; Or, T.; Rabkin, Y.; Klainman, E.; Halabi, S.; Halon, D. A.; Katz, A.; Plaev, T.; Drogenikov, T.; Atar, S.; Kilimnik, M.; Wishniak, A.; Merei, M.; Zvi, Y.; Nikolsky, E.; Zukermann, R.; Petcherski, S.; Bosi, S.; Gaitani, S.; Naldi, M.; Barbieri, A.; Faggiano, P.; Guidetti, F.; Adamo, M.; D’Aloia, A.; Magatelli, M.; Robba, D.; Mos, L.; Vriz, O.; Sinagra, G.; Maras, P.; Doimo, S.; Cosmi, F.; D'Orazio, S.; Oltrona Visconti, L.; Leonardi, S.; Vullo, E.; Sbaffi, A.; Azzara, G.; Mauri, S.; Gianni, U.; de Matteis, C.; Campidonico, U.; Di Pasquale, G.; Di Niro, M.; Riva, L.; Filippini, E.; Di Biase, M.; Ieva, R.; Martone, A.; Mandorla, S.; Regni, O.; Capponi, E. A.; Martinelli, S.; Bernardinangeli, M.; Proietti, G.; Piccinni, G. C.; Gualtieri, M. R.; Gulizia, M. M.; Francese, G. M.; Portale, A.; Galvani, M.; Ottani, F.; Capatano, O. G.; Conficoni, E.; Longhi, S.; Bachetti, C.; Venturi, F.; Capati, E.; Morocutti, G.; Bisceglia, T.; Fresco, C.; Baldin, M. G.; Gamba, C.; Olivieri, C.; Perna, G. P.; Battistoni, I.; Marini, M.; Cirrincione, V.; Ingrilli, F.; Kanno, T.; Ishii, Y.; Kohmura, C.; Igawa, T.; Izawa, K.; Daida, H.; Miyauchi, K.; Shimada, K.; Ohmura, H.; Ito, S.; Okazaki, S.; Konishi, H.; Miyazaki, T.; Hiki, M.; Kurata, T.; Suzuki, H.; Morimoto, R.; Yokoyama, M.; Yamamoto, T.; Okai, I.; Isoda, K.; Fujimoto, S.; Dohi, T.; Shimada, A.; Ozaki, Y.; Watanabe, E.; Kawai, H.; Naruse, H.; Takada, K.; Okuda, K.; Okumura, M.; Ishikawa, M.; Ohtsuki, M.; Ohta, M.; Sarai, M.; Koshikawa, M.; Kawai, M.; Miyagi, M.; Motoyama, S.; Matsui, S.; Ichikawa, T.; Kato, Y.; Nagahara, Y.; Muramatsu, T.; Hashimoto, Y.; Hoshino, N.; Harada, M.; Yamada, A.; Yoshiki, Y.; Motoike, Y.; Nomura, Y.; Miyajima, K.; Takatsu, H.; Nishimura, H.; Nagasaka, R.; Kawada, Y.; Miyamoto, N.; Seki, K.; Inoue, A.; Higashiue, S.; Kojima, S.; Kuroyanagi, S.; Furuya, O.; Komooka, M.; Yamamoto, S.; Wakabayashi, N.; Domae, H.; Ata, T.; Hashidomi, H.; Kawahara, R.; Hosokawa, S.; Hiasa, Y.; Otani, R.; Kishi, K.; Takahashi, T.; Yuba, K.; Miyajima, H.; Tobetto, Y.; Yoneda, K.; Ogura, R.; Kobayashi, H.; Takamura, T.; Enkou, K.; Ochi, Y.; Yamada, D.; Kuramochi, T.; Misumi, K.; Iiduka, D.; Hirose, M.; Tone, K.; Taniguchi, Y.; Ebihara, T.; Makino, M.; Yokota, M.; Nitta, M.; Udo, A.; Shimizu, S.; Fujii, K.; Iwakura, K.; Okamura, A.; Inoue, K.; Nagai, H.; Hirao, Y.; Tanaka, K.; Tanaka, N.; Yamasaki, T.; Oka, T.; Iwamoto, M.; Tanaka, T.; Nakamaru, R.; Okada, M.; Takayasu, K.; Sumiyoshi, A.; Inoue, H.; Kitagaki, R.; Ninomiya, Y.; Mizutomi, K.; Koizumi, I.; Funada, A.; Tagawa, S.; Kamide, S.; Saku, K.; Ideishi, M.; Ogawa, M.; Uehara, Y.; Iwata, A.; Nishikawa, H.; Ike, A.; Sugihara, M.; Imaizumi, S.; Fujimi, K.; Kawamura, A.; Sako, H.; Morito, N.; Morii, J.; Fukuda, Y.; Yahiro, E.; Matsunaga, A.; Matsumoto, N.; Noda, K.; Shiga, Y.; Nagata, Y.; Kimura, K.; Ebina, T.; Hibi, K.; Iwahashi, N.; Maejima, N.; Konishi, M.; Matsushita, K.; Minamimoto, Y.; Kawashima, C.; Nakahashi, H.; Kimura, Y.; Takahashi, H.; Matsuzawa, Y.; Kirigaya, J.; Sato, R.; Kikuchi, S.; Ogino, Y.; Kirigaya, H.; Kashiwase, K.; Hirata, A.; Takeda, Y.; Amiya, R.; Higuchi, Y.; Sakaguchi, T.; Nakano, T.; Matsusaki, N.; Suzuki, S.; Hayashi, T.; Nakatani, S.; Koide, M.; Kobayashi, T.; Hamanaka, Y.; Makino, N.; Sotomi, Y.; Abe, M.; Fujieda, H.; Hashimoto, K.; Teratani, Y.; Abe, Y.; Yokoyama, Y.; Higashino, H.; Okuda, H.; Yamazato, M.; Noda, T.; Arai, M.; Ono, K.; Hirose, T.; Iwama, M.; Warita, S.; Goto, Y.; Abe, S.; Kojima, T.; Yoshizane, T.; Tanihata, S.; Fujii, T.; Yagasaki, H.; Miwa, H.; Ishiguro, M.; Kato, T.; Watanabe, R.; Horio, S.; Mita, T.; Hirayama, A.; Watanabe, I.; Hiro, T.; Nakai, T.; Takayama, T.; Yoda, S.; Yajima, Y.; Okubo, K.; Okumura, Y.; Kato, M.; Fukamachi, D.; Aizawa, Y.; Sonoda, K.; Iida, K.; Sasaki, N.; Iso, K.; Takahashi, K.; Kougo, T.; Haruta, H.; Kurokawa, S.; Mano, H.; Nagashima, K.; Onaka, H.; Doi, H.; Hirano, N.; Okamoto, F.; Mori, K.; Ri, G.; Zushi, R.; Otsuka, K.; Inoko, M.; Haruna, T.; Nakane, E.; Miyamoto, S.; Izumi, T.; Honjo, S.; Ikeda, H.; Wada, Y.; Funasako, M.; Hayashi, H.; Hamasaki, A.; Sasaki, K.; Seko, Y.; Nakasone, K.; Hanyu, M.; Iwasaki, Y.; Iwasaki, K.; Ayano, S.; Hirokami, M.; Omoto, Y.; Sasaki, H.; Sato, H.; Yuda, S.; Okubo, M.; Matsuo, H.; Tsuchiya, K.; Kawase, Y.; Miyake, T.; Kondo, H.; Hattori, A.; Kikuchi, J.; Okamoto, S.; Hirata, T.; Kawamura, I.; Ota, H.; Omori, H.; Tanigaki, T.; Kamiya, H.; Sobue, Y.; Komoda, T.; Akatsuka, Y.; Yamamoto, M.; Isegawa, K.; Takanezawa, M.; Kataoka, C.; Imamaki, M.; Shibata, Y.; Yasuda, K.; Shimano, M.; Ozaki, R.; Morishita, Y.; Okabe, K.; Kondo, K.; Miura, A.; Manita, M.; Tabata, K.; Asahi, T.; Mashidori, T.; Higa, N.; Nakata, M.; Himi, T.; Matsudo, Y.; Sekine, T.; Hou, K.; Tonoike, N.; Hama, Y.; Tanaka, S.; Ge, B.; Takahara, M.; Ishimura, M.; Shikada, T.; Ueno, H.; Amemiya, H.; Hisamatsu, Y.; Sada, K.; Sato, T.; Harada, K.; Nakamura, T.; Ako, J.; Tojo, T.; Shimohama, T.; Kishihara, J.; Ishii, S.; Fukaya, H.; Meguro, K.; Nishino, Y.; Inoue, M.; Matsui, Y.; Omura, Y.; Kawakami, H.; Matsuoka, H.; Oshita, A.; Seike, F.; Kondo, N.; Miyoshi, T.; Yamada, Y.; Uchiya, T.; Kikuchi, Y.; Koretsune, Y.; Abe, H.; Shinouchi, K.; Nishida, H.; Yasumura, K.; Date, M.; Ueda, Y.; Iida, Y.; Idemoto, A.; Toriyama, C.; Yokoi, K.; Mishima, T.; Yamada, T.; Fukunami, M.; Morita, T.; Furukawa, Y.; Kawasaki, M.; Kikuchi, A.; Tamaki, S.; Seo, M.; Shirakawa, Y.; Ikeda, I.; Fukuhara, E.; Kawai, T.; Kayama, K.; Kawahira, M.; Tanabe, K.; Nakamura, J.; Shimomura, H.; Kudo, T.; Morisaki, S.; Ogura, Y.; Chazono, N.; Onoue, Y.; Matsumuro, Y.; Shirakawa, T.; Nishi, M.; Kinoshita, N.; Nakamura, R.; Miyai, N.; Ohta, K.; Sawanishi, T.; Takahashi, A.; Hada, T.; Nakajima, S.; Taniguchi, N.; Mizuguchi, Y.; Takahashi, Y.; Hashimoto, S.; Machida, M.; Hirabayashi, K.; Morimoto, S.; Higashino, Y.; Otsuji, S.; Takiuchi, S.; Yabuki, M.; Hasegawa, K.; Shishikura, D.; Ibuki, M.; Ishibuchi, K.; Nagayama, S.; Ishii, R.; Tamaru, H.; Yamamoto, W.; Utsu, N.; Miyakoshi, K.; Nakashima, D.; Tsukuda, K.; Ueda, K.; Nakano, A.; Fukuda, T.; Ikeda, S.; Tsuchiya, H.; Toshima, S.; Tateno, R.; Ishikubo, T.; Suguta, M.; Nakamura, S.; Funatsu, A.; Mizobuchi, M.; Tanaka, M.; Nagai, T.; Hirano, S.; Hashimoto, T.; Doi, T.; Shirasaka, A.; Takeda, S.; Sasaki, Y.; Ohya, H.; Hosokawa, A.; Nishina, N.; Koki, B.; Ando, K.; Hiramori, S.; Soga, Y.; Tomoi, Y.; Tohoku, S.; Shirai, S.; Hyodo, M.; Isotani, A.; Domei, T.; Kuramitsu, S.; Morinaga, T.; Hayashi, M.; Hiromasa, T.; Nagae, A.; Yamaji, Y.; Nakao, K.; Sakamoto, T.; Taguchi, E.; Tsurugi, T.; Tanaka, Y.; Suzuyama, H.; Koyama, J.; Nagano, M.; Okamatsu, H.; Kodama, K.; Nakamura, M.; Horibata, Y.; Sone, M.; Tsunemori, M.; Bando, M.; Nakayama, T.; Tanigaito, Y.; Nomoto, M.; Sawamura, T.; Unoki, T.; Lim, C. W.; Zainal Rashid, R.; Najme Khir, R.; Ibrahim, K. S.; Wan Azman, W. A.; Sridhar, G. S.; Watson, T.; Abu Kassim, Z.; Mahmood Zuhdi, A. S.; Abdul Hafidz, M. I.; Abu Hassan, M. R.; Wan Rahimi Shah, W. F.; Karthikesan, D.; Mohd Suan, M. A.; Md Ali, S. M.; Kasim, S.; Mohd Arshad, M. K.; Ismail, J. R.; Ibrahim, Z. O.; Chua, N. Y. L.; Abdul Rahim, A. A.; Rusani, B. I.; Yap, L. B.; Zamrin, D. M.; Amir, M. A.; Ismail, N. I.; Mohammad Razi, A. A.; Prins, F.; Bendermacher, P.; Burg, M.; Lok, D.; van der Sluis, A.; Martens, F.; Badings, E.; Milhous, J.; van Rossum, P.; Viergever, E.; van Hessen, M.; Willems, F.; Tjon Joe Gin, R.; Swart, H.; Oomen, A.; Kromhout, S.; Lauwerijssen, I.; Daalmans, M.; Breedveld, R.; de Vries, K.; Feenema Aardema, M.; Hofma, S.; van der Borgh, R.; van Nes, E.; Göbel, E.; Oei, F.; Dorman, H.; Bos, R.; Zoet-Nugteren, S.; Emans, M.; Kragten, H.; Lenderink, T.; Feld, R.; Herrman, J.; van Bergen, P.; Gosselink, M.; Elvan, A.; Hoekstra, E.; The, S.; de Vries, R.; Zegers, E.; Oude Ophuis, T.; Remmen, J.; Bech, J.; Kooistra, J.; den Hartog, F.; Oosterhof, T.; Bartels, G.; Posma, J.; Nierop, P.; Liem, A.; van der Zwaan, C.; Asselman, M.; van Eck, J.; Gevers, R.; van Gorselen, E.; van Hal, J.; Terpstra, W.; Groenemeijer, B.; Jerzewski, A.; Hoogslag, P.; Geertman, J.; de Groot, M.; Dijkstra, B.; Loyola, A.; Sulit, D.; Mercado, M. J.; Rey, N.; Evangelista, L.; Abola, M.; Padua, L.; Morales, D.; Palomares, E.; Abat, M.; Santos, R.; Rogelio, G.; Chua, P.; Baello, R.; del Pilar, J.; Alianza, M.; Alcaraz, J.; Alcaraz, L.; Ebo, G.; Guido-Saliot, I.; Tirador, L.; Estoce, E.; Ygpuara, M.; Cruz, J.; Anonuevo, J.; Pitargue, A.; Janion, M.; Drewniak, Z.; Guzik, B.; Nowak, M.; Nosal, M.; Niewiara, Ł; Gajos, G.; Bury, K.; Czubek, U.; Misztal, M.; Grzybczak, R.; Zalewski, J.; Kruszelnicka-Kwiatkowska, O.; Żabówka, M.; Rynkiewicz, A.; Grzybowski, A.; Szałkowski, P.; Broncel, M.; Gorzelak, P.; Możdżan, M.; Olszewska Banaszczyk, M.; Szuba, A.; Tabin, M.; Chachaj, A.; Czarnecka, D.; Terlecki, M.; Klocek, M.; Maga, P.; Coman, I.; Tarlea, M.; Ghionea, M.; Gavrila, C.; Dimulescu, D.; Popescu, A.; Stoicescu, C.; Vintila, V.; Florescu, M.; Baghilovici Cretu, D.; Suran, M.; Mihalcea, D.; Lungeanu Juravle, L.; Cinteza, M.; Calin, I.; Bicescu, G.; Vasile Toma, N.; Udroiu, C.; Gherghinescu, C.; Darabont, R.; Patrascu, N.; Constantinescu, C.; Popescu, I.; Sinescu, C.; Andrei, C.; Axente, L.; Arsenescu, C.; Statescu, C.; Ardeleanu, I.; Anghel, L.; Benedek, I.; Benedek, T.; Kinga, P.; Banga, D. K.; Bobescu, E.; Doka, B.; Dobreanu, D.; Sirbu, V.; Rudzik, R.; Kantor, K.; Sus, I.; Gaita, D.; Maximov, D.; Brie, D.; Mosteoru, S.; Olariu, I.; Iancu, A.; Marc, M.; Hagiu, R.; Manole, V.; Molnar, A.; Dregoesc, I.; Iliesiu, A.; Armean, P.; Parvu, I.; Deleanu, A.; Lighezan, D.; Buzas, R.; Petrescu, L.; Nicola, R.; Dan, R.; Crisan, S.; Trasca, L.; Teodorescu, I.; Zara, O.; Tiron, T.; Tesloianu, D.; Spiridon, M.; Vintila, M.; Baluta, M.; Chioncel, O.; Stoica, E.; Kulcsar, I.; Antohi, L.; Strazhesko, I.; Tkacheva, O.; Sharashkina, N.; Pykhtina, V.; Vasyuk, Y.; Shkolnik, E.; Khadzegova, A.; Sadulaeva, I.; Ivanova, S.; Nesterova, E.; Nesvetov, V.; Shupenina, E.; Shcherbak, M.; Sizova, Z.; Beloborodova, A.; Pozdnyakov, Y.; Tarasov, A.; Shvedov, I.; Zabashta, S.; Ryzhikova, I.; Barbarash, O.; Pecherina, T.; Vatutin, M.; Inozemceva, A.; Kazachek, Y.; Mineeva, E.; Kupriyanova, T.; Voevoda, M.; Gafarov, V.; Gromova, E.; Panov, D.; Voevoda, E.; Kovalkova, N.; Ragino, Y.; Poponina, T.; Poponina, Y.; Garganeeva, N.; Repin, A.; Vershinina, E.; Borodina, E.; Kalashnikova, T.; Safyanova, O.; Osipova, I.; Antropova, O.; Pyrikova, N.; Polyakova, I.; Efremushkina, A.; Guryanova, N.; Kiseleva, E.; Lomteva, E.; Shtyrova, T.; Novikova, N.; Parfenov, D.; Volovchenko, A.; Averkov, O.; Pavlikova, E.; Vaulina, L.; Pletnikova, I.; Mishchenko, L.; Saranin, S.; Tsupko, I.; Kuznetsova, N.; Zateyshchikov, D.; Dankovtseva, E.; Vlazneva, Y.; Tolokonnikova, N.; Zhurina, M.; Zubova, E.; Aseycheva, O.; Sigalovich, E.; Vertkin, A.; Rodiukova, I.; Komissarov, S.; Sokolova, R.; Ausheva, A.; Salbieva, A.; Yusubova, A.; Isakova, S.; Hranai, M.; Obona, P.; Cisar, P.; Semetko, J.; Vanova, P.; Ferencikova, Z.; Vykoukalova, T.; Gaspar, L.; Caprnda, M.; Bendzala, M.; Pella, D.; Fedacko, J.; Hatalova, K.; Drozdakova, E.; Peter, O.; Ntsekhe, M.; de Andrade, M.; Seedat, S.; Gani, M.; van Zyl, L.; Naude, M.; Cronje, T.; van Zyl, F.; Engelbrecht, J.; Jansen, J.; Roos, J.; Makotoko, E.; Pretorius, C.; Mirna, S.; Nell, H.; Pretorius, M.; Basson, M.; Njovane, X.; Mohamed, Z.; Pillay, T.; Dawood, S.; Horak, A.; Lloyd, E.; Hitzeroth, J.; Mabin, T.; Abelson, M.; Klug, E.; Gebka, M.; Hellig, F.; Alison, M.; Bae, J.; Kim, C.; Kim, D.; Joo, S.; Park, C.; Kim, Y.; Jarnert, C.; Rydén, L.; Mooe, T.; Binsell-Gerdin, E.; Dellborg, M.; Torstensson, I.; Albertsson, P.; Hiller, M.; Perers, E.; Johansson, L.; Jansson, J. H.; Al-Khalili, F.; Almroth, H.; Andersson, T.; Eriksson Östman, M.; Pantev, E.; Utter, F.; Tengmark, B. O.; Olsson, Å; Liu, B.; Rasmanis, G.; Wahlgren, C. M.; Thott, O.; Moccetti, T.; Rossi, M. G.; Crljenica, C.; Dovgan, N.; Skarzhevskyi, O.; Kozhukhov, S.; Tseluyko, V.; Mishchuk, N.; Kuznetsov, I.; Semenikhin, S.; Matviichuk, N.; Matuzok, O.; Yakovleva, L.; Volkov, V.; Zaprovalna, O.; Serik, S.; Riabukha, V.; Koval, O.; Kaplan, P.; Ivanov, A.; Romanenko, S.; Skoromna, A.; Kononenko, L.; Saprychova, L.; Lazareva, S.; Prokhorov, O.; Vdovychenko, V.; Bychkov, M.; Demydova, A.; Kapustynska, O.; Bazylevych, A.; Dutka, R.; Vlasyuk, Z.; Shabat, M.; Rudenko, L.; Beregova, O.; Fedtchouk, L.; Gusak, I.; Vizir, V.; Sadomov, A.; Shkolovoy, V.; Nasonenko, O.; Demidenko, O.; Karpenko, O.; Ponomarenko, K.; Oryshych, G.; Nevolina, I.; Mitskevych, L.; Bezuglova, S.; Kizim, S.; Todoriuk, L.; Brodi, N.; Karpenko, L.; Malynovsky, Y.; Fedotov, S.; Malynovska, O.; Goydenko, O.; Miroshnykov, S.; Rabota, I.; Koval, V.; Ohirko, O.; Khaba, U.; Storozhuk, B.; Danylchuk, I.; Danylchuk, A.; Gutsuliak, R.; Cotton, J.; Luckraz, H.; Wrigley, B.; Venkataraman, A.; Maher, A.; Moriarty, A.; McEneaney, D.; Connolly, D.; Davis, R.; Banerjee, P.; Davey, P.; Elmahi, E.; Senior, R.; Ahmed, A.; Birdi, I.; Gedela, S.; Singh, A.; Calvert, J.; Butler, M.; Donnelly, P.; Jasinka, A.; Orr, C.; Trevelyan, J.; Routledge, H.; Carter, J.; Oxenham, H.; Peace, A.; McNeill, A.; Austin, D.; Jackson, M.; Kukreja, N.; Kotwinski, P.; Hilton, T.; Bilizarian, S.; Srivastava, S.; Walsh, R.; Fields, R.; Portnay, E.; Gogia, H.; Deits, R.; Salacata, A.; Hunter, J.; Bacharach, J.; Shammas, N.; Suresh, D.; Gurbel, P.; Banerjee, S.; Grena, P.; Bedwell, N.; Sloan, S.; Lupovitch, S.; Soni, A.; Gibson, K.; Pepper, D.; Sangrigoli, R.; Mehta, R.; Patel, J.; I-Hsuan Tsai, P.; Gillespie, E.; Harrison, A.; Dempsey, S.; Phillips, R.; Hamroff, G.; Hametz, C.; Black, R.; Lader, E.; Kostis, J.; Bittner, V.; Mcguinn, W.; Cheng, R.; Pal, J.; Malhotra, V.; Michaelson, S.; Vacante, M.; Mccormick, M.; Arimie, R.; Dukkipati, R.; Camp, A.; Dagher, G.; Kosh y, N.; Culp, J.; Thew, S.; Ferraro, A.; Costello, F.; Heiman, M.; Chilton, R.; Moran, M.; Adler, F.; Balingit, P.; Comerota, A.; Seiwert, A.; French, W.; Vardi, G.; Singh, T.; Serota, H.; Qayyum, U.; Das, S.; Harrison, R.; Vora, A.; Bakeen, F.; Omer, S.; Chandra, L.; Casaccia, G.; Tinto, J.; Sighel, C.; Giozzi, E.; Morell, Y.; Bianchini, M.; Yossen, M.; Hoyos, M.; Venturini, C.; Merkusa, C.; Carrique, A.; Carrique, P.; Fracaro, V.; Torres, M.; Crunger, P.; Espinosa, M.; Passarello, A.; Zaidman, M.; Ledesma, M.; Troncoso, C.; Aviles, A.; Rodera Vigil, S.; Vogel, M.; Takla, M.; Funosas, C.; Ferreiro, M.; Bruno, T.; Buzzetti, C.; Lozano, J.; Alvarez Dámelio, A.; Bocanera, M.; Vicente, D.; Cenci, A.; Deluca, C.; Santana, R.; Ahuad Calvelo, A.; Alvarez D'Amelio, A.; Ahuad Calvelo, J.; Herrero, S.; Robertson, M.; Tapia, D.; Escalante, M.; Cañas, M.; Cendali, G.; Esposito, L.; Muñiz, M.; Montaña, J.; Di Vruno, M.; Strevezza, M.; Lopez Santi, M.; Massei, N.; Garate, V.; Perlo, D.; Campora, F.; Jakubowski, I.; Gonzalez Moisello, M.; Actis, M.; Schiavi, S.; Aguirre, M.; Ceirano, C.; Zillo, M.; Yunis, M.; Berdini, A.; Gerbaudo, R.; Berdini, J.; Palma, F.; Pinero, S.; Virulio, S.; Vitale, A.; Sosa Flores, G.; Ibanez Saggia, C.; Ibanez Saggia, D.; Roses, A.; Martinelli, C.; Vargas, L.; Galarza Salazan, M.; Dran, P.; Tinnirello, V.; Pelayes, S.; Bordoni, P.; Navarro, A.; Barilati, P.; Serra, R.; Nigro, A.; Cleiman, S.; Bianchi, M.; Vallejo, M.; Ingratta, M.; Tonelli, L.; Levantini, M.; Bonifacio, M.; Hansen, V.; Chaieb, A.; Majul, S.; Medina, F.; Gallinotti, P.; Madariaga, T.; Andrea, G.; Blumberg, C.; Volpe, M.; Gandur, H.; Benincasa, V.; Barreto, M.; Jure, D.; Tulloch, G.; Greenwell, D.; Forrest, N.; Nyman, E.; Mcintosh, C.; O'May, V.; Grabek, T.; Conway, B.; O’Donoghue, M.; Brady, L.; Duroux, M.; Ratcliffe, M.; Shone, S.; Connelly, A.; Ferreira-Jardim, A.; Vandernet, R.; Downes, R.; Davids, F.; Teal, L.; Knight, S.; Soraghan, D.; Spence, C.; Smith, K.; Tivendale, L.; Williams, Z.; O'Connor, M.; Walker, I.; Ferguson, L.; Holiday, J.; Griffin, R.; Palethorpe, L.; Hindom, L.; Lilwall, L.; Wadham, S.; Narasimhan, K.; van Extergem, P.; Joris, I.; Oreglia, M.; Jacobs, C.; Leus, W.; Robesyn, V.; Vanheule, K.; van den Bossche, K.; Albertijn, S.; Vissers, C.; Badts, G.; Vangenechten, K.; Derycker, K.; Dejaegher, K.; de Grande, T.; de Clippel, M.; Gayet, F.; Jorion, M.; Jourdan, A.; Tartaglia, K.; Zwinnen, W.; Roijakkers, I.; van Genechten, G.; Schoonis, A.; Bollen, J.; Janssen, A.; de Coninck, M.; Ruell, S.; Grimonprez, A.; Bouckaert, N.; van Eeckhoutte, H.; Malmendier, D.; Massoz, M.; Jacquet, S.; Vanhalst, E.; Casier, T.; Barroso, S. L.; Tamashiro, N.; Correa, C. P.; Sehnem, E. A. B.; Precoma, C. B.; Pinheiro, L.; Ruschel, K. B.; dos Reis, A. L.; Santos, M. S.; de Oliveira, L. O. S. P.; de Carvalho, L. M. G.; dos Santos, M. E. S.; Reis, L. L. F.; da Cunha, G. T.; França, F. F.; Bessa, S. K.; Vicente, C.; Ormundo, C.; Trama, L.; Pires, N. F.; Esteves, D.; Sila, O. L.; Góes, N. C.; Amorin, R. C.; Faria, M. O.; Bucalon, E. C.; Marin, L. P.; Herek, L.; Araujo, V. L.; Silva, A. F.; Lima, F.; Gomes, C. G.; Pagnan, L. G.; Novelli, C. M.; Carvalho, J. K. C.; Teodoro, A. R.; Zimmermann, E. M. B.; Beiersdorf, J. R.; Machado, B. G.; Pedroso, F. B. V.; de Vargas, T.; Peres, C. S.; dos Santos, T. F.; de Souza, S. F.; Luiz, R. O.; Ferreira, P.; Souza, D. F.; Cunha, S. M. C.; de Resende, I. M.; Furtado, C. C. F.; Soprane, A. A.; Brum, A. B.; Zorzo, J. A. T.; dos Santos, J. C.; Queiroz, L. B.; Barros, F. E.; Vianna, C. O.; Zanateli, A.; Vieira, A. P. Z.; Melo, G.; Zambonin, G. E. C.; Paiva, P.; Viana, R. M. M.; Yagihara, M. M.; Takiuti, M. M.; Miyamoto, P. B.; da Silva, M. F.; Borin, L. A.; Chiazzini, S. M. L.; Fleck, N.; Batista, R. F.; Cardoso, D. T.; MCamasmie, P.; Assompção, R. P.; Marques, L. L.; Leung, S.; Lewis, C.; Tytus, A.; Clarus, S.; Juranics, S.; Pandey, M.; Frenette, L.; Magi, A.; Nowacki, B.; Otis, J.; Fox, B.; Corke, R.; Miller, B.; Rizzo, A.; Trombetta, L.; Power, P.; Richert, L.; Haligowski, R.; Macrae, C.; Kooistra, L.; Urso, C.; Fox, S.; Felbel, S.; Stafford, C.; Stata, C.; Barnabe, B.; Mehta, K.; Faul, J.; Gohel, J.; Bhakta, S.; Harwood, A.; McPherson, C.; Marucci, J.; Manasterski, L.; Veenhuyzen, J.; Ramadan, D.; Madden, B.; Jetha, A.; Pajevic, M.; Dube, C.; Rolfe, B.; O’Blenis, G.; Roy, L.; Dihel, C.; Butler, J.; Simmavong, K.; Bartol, C.; Bozek, B.; Hart, B.; Shier, M.; Coughlin, M.; Lamantia, C.; Lamantia, D.; Vilag, C.; Fecteau, J.; Dionne, J.; Péloquin, G.; Hogg, N.; Welsh, S.; Weerasingam, S.; Lantz, M.; Lounsbury, N.; Martin, E.; Mitchell, L.; Morgen, G.; Nelson, S.; Pelzer, E.; Sorensen, S.; Leblanc, A.; Bourlaud, A. S.; Prémont, A.; Léger, P.; Larivière, M. M.; Tremblay, H.; Bergeron, A.; Dumont, J.; Keilani, S.; Landry, P.; Deneufbourg, I.; Breton, C.; Bilodeau, N.; Côté, M.; Dumont, F.; Dufort, L.; Marcoux, D.; David, M.; Otis, R.; Parks, J.; Cepidoza, C.; Janz, W.; Weighell, W.; Yaworski, S.; Boyd, K.; Lambert, J.; Shea-Landry, G.; Reid, K.; Thiessen, S.; Nemtean, D.; Futers, S.; Drouin, K.; Masson, C.; Arseneault, M. C.; Lachance, N.; Bergeron, C.; Boudreault, C.; Perkins, L.; Barnett, A.; Fortin, J.; Duclos, R.; Vallières, C.; Bouchard-Pilote, C.; Ouimet, F.; Roberge, B.; Couture, M. L.; Deshaies, D.; Bastien, A.; Chartrand, M. J.; Gagné, N. L.; Desbiens, K.; Alarie, P.; Cassan, J.; Ducharme, Y.; Roy D Tapps, I.; Bolduc, H.; Laliberté, J.; Hickey, L.; Spero, M.; Bernstein, M.; Clement, J.; Pawluch, A.; Ricci-Bonzey, M.; Richer, J.; Vaillancourt, J.; Ward, B.; Mostafai Rad, P.; Oleski, L.; Karkhanis, R.; Hartleib, V.; Poirier, R.; Hidalgo, J.; Hernandez, C.; Obreque, C.; Quilapi, D.; Villa, F.; Iturriaga, C.; Ferrada, M.; Navarrete, S.; Becerra, E.; Vargas, C.; Roque, C.; Alarcon, J.; Diaz, D.; Sepulveda, M.; Villan, C.; Garcia, N.; Lara, C.; Lezana, B.; Basso, N.; Torres, G.; Pasmino, C.; Gonzalez, S.; Medina, D.; Rodriguez, T.; Guo, T.; Chen, S.; Han, W.; Shi, D.; Zhang, Q.; Li, W.; Cui, L.; Huang, Z.; Gong, X.; Liu, D.; Tan, S.; Caicedo, L.; Rodriguez, A.; Mejia, I.; Escalante Ruiz, J.; Camera Ochoa, C.; Conrrado Ortega, Y.; Accini Diaz, A.; Rodriguez, B.; Lopez-Lopez, J.; Di Stefano, K.; Florez, L.; Manco, T.; Rodriguez, D.; Urina, A.; de La Hoz, L.; Almendrales, L.; Bello, O.; Urrea Valencia, H.; Correa Rivera, P.; Perdomo, I.; Alzate, J.; Rivera, E.; Jimenez, N. N.; DMoreno, N.; Guzman, A.; Betancourt, S.; Mendoza Marin, H.; Leyva, M.; Ortiz, M.; Marin, E.; Angie Lorena, A.; Alvarez, Y.; Cervantes Hurtado, A.; Accini Mendoza, A.; Trujillo Accini, M.; Eguis, B.; del Portillo, C.; Ortega, M.; Delgado, P.; Arciniegas, J.; Rodriguez, L.; Melo Sanchez, S.; Chavera, I.; Pastrana Mendoza, M.; Negrette Quintero, A.; Zidek, M.; Hajkova, D.; Rozskowska, P.; Opavska, I.; Souckova, E.; Matuskova, E.; Kratochvilova, T.; Pavelec, P.; Zelenkova, V.; Dolezalova, Z.; Márquez, M.; Moreira, D.; Zuleta, M.; Santana, G.; Coello, A.; Andrade, G.; Salazar, J.; Rivadeneira, J.; Vaerma, J.; Lappalainen, S.; Silvennoinen, S.; Haaraoja, A.; Valimaki, S.; Roine, E.; Abergel, H.; Msakni, W.; Fuentes, A.; Briday, G.; David, A.; Soltani, S.; Decorps, A.; Chettouh, M.; Douillet, M.; Zamiti-Smondel, A.; Cuccu, L.; Salhi, N.; Helene, M.; Martin, S.; Merah, A.; Daher, P.; Laurie, S.; Roussel, L.; Leperchois, C.; Delelo, E.; Thalamy, A.; Chazot, E.; Tahirovic, E.; Watson, S.; Brettschneider, B.; Maas, M.; Euler, K.; Rahn, G.; Beissner, S.; Anuschek, V.; Tu, E.; Buerger, M.; Schemann, J.; Klinger, C.; Kurzidim, T.; Sahbani, S.; Laszig, S.; Beilfuss, M.; Foerster, A.; Eichinger, G.; Rupprecht, M.; Kuehnert, J.; Wendler-Huelse, I.; Buelow-Johansen, B.; Baierlein, A.; Iselt, M.; Sievert, B.; Frommhold, R.; Wolf, T.; Hahn, M.; Schoen, B.; Acimic, C.; Ludwig, M.; Funkat, A.; Wagner, I.; Schink, M.; Calvo-Sanchez, D.; Felfoldine Feil, J.; Patakine Sumegi, T.; Miko-Pauer, R.; Courcy, M.; Kelly, C.; Farrell, D.; Kirrane, C.; Hall, M.; Gilroy, E.; Kelsey, M.; Andrew, G.; Joyce, M.; Conway, S.; Duane, L.; Omer, T.; Zuker, S.; Platner, N.; Saranga, H.; Kaufman, E.; Livshitz, L.; Genin, I.; Klainman, M.; Uziel Iunger, K.; Abitbul, A.; Fishman, B.; Greenshtein, I.; Tubul, O.; Lasri, E.; Zvi, R.; Yablonski, A.; Helmer Levin, L.; Lunetto, M. L.; Savoldi, D.; Fiorini, M.; Ramani, F.; Mariottoni, B.; Rizzotti, D.; Di Matteo, C.; Musio, S.; Pieroni Minciaroli, S.; Serani, S.; Aloisi, A.; Attanasio, C.; Tricoli, M.; Giordano, V.; Andrioli, V.; Biundo, V.; Tullio, L.; Schiff, D.; Trovarelli, P.; Chiodi, R.; Sampaolesi, S.; Cina, M. T.; Abatello, M.; de Tora, M.; Pietrucci, F.; Pezzetta, S.; Chiminelli, E.; Dall’Asta, A.; Bennati, M.; Elia, A.; Bizzoco, M.; Iaquaniello, A.; Spigarelli, R.; Cremonesi, C.; Gagliardi, M.; Torricelli, L.; Ijichi, N.; Shiraiwa, K.; Murakami, M.; Takeshita, K.; Sato, M.; Shiratori, A.; Kinjo, K.; Tomita, K.; Mizuno, M.; Kurihara, F.; Tachibana, M.; Nitta, Y.; Unno, K.; Hiramatsu, H.; Sano, A.; Nanatsumura, M.; Tanikawa, I.; Uesugi, K.; Banno, S.; Miyata, T.; Kujuji, A.; Kawai, K.; Maegawa, A.; Koseki, T.; Watanabe, Y.; Aoki, S.; Maesawa, M.; Suzuki, A.; Itose, Y.; Konishi, K.; Fujieda, K.; Nakade, S.; Minami, M.; Yoneda, J.; Akiyama, R.; Sakai, S.; Nakatani, K.; Yamazaki, A.; Funama, M.; Kaneko, E.; Morii, S.; Onishi, M.; Sone, A.; Sagawa, N.; Iwai, F.; Kawahara, A.; Hasimoto, C.; Ueki, M.; Kamiji, M.; Ando, M.; Yokoo, M.; Okada, Y.; Yamada, H.; Matsushige, N.; Nagato, A.; Matsumoto, R.; Nishikawa, M.; Oka, I.; Kitou, S.; Tachiuchi, M.; Nakagawa, M.; Yoneda, S.; Iwasa, K.; Matsuda, J.; Oda, A.; Tokudome, S.; Kaneyuki, Y.; Higaki, M.; Yoneda, H.; Kajita, C.; Suwa, K.; Sato, E.; Nagata, T.; Kubo, Y.; Umesu, A.; Ohashi, K.; Takeuchi, M.; Tanaka, I.; Nobehara, T.; Yamano, R.; Yumiba, A.; Hamada, M.; Nishihata, T.; Ohashi, Y.; Morita, M.; Endo, M.; Matsugi, M.; Tateishi, H.; Nakamori, R.; Yamashita, Y.; Okabe, M.; Matsuo, M.; Ono, T.; Shigeyama, Y.; Ichiyanagi, M.; Sugimori, K.; Ohmura, C.; Igarashi, M.; Aotsuka, S.; Komoda, N.; Watanabe, M.; Enomoto, Y.; Suzuki, Y.; Kawaguchi, A.; Kasahara, A.; Koide, A.; Sakatani, T.; Kurihara, T.; Yokota, S.; Futagi, R.; Amemiya, Y.; Ono, E.; Maeda, A.; Kadono, K.; Ishiguchi, Y.; Kikuchi, R.; Kuramatsu, M.; Nakamura, E.; Chiba, S.; Higa, A.; Kitahashi, M.; Tanaka, H.; Ito, T.; Oba, M.; Tsubouchi, M.; Toshima, M.; Morishita, M.; Miyano, A.; Kondo, M.; Watanabe, K.; Shibata, R.; Tosaki, Y.; Ito, Y.; Saoda, M.; Yamasaki, E.; Kadosaki, S.; Motooka, S.; Akiyoshi, H.; Morio, S.; Nemoto, H.; Yoshizawa, S.; Okabe, N.; Semba, K.; Yoshida, A.; Lee, Y.; Yoshida, M.; Iwashita, Y.; Takeda, A.; Maezato, M.; Kawahira, K.; Yoshikawa, M.; Okamoto, N.; Nishimura, M.; Matsuura, K.; Fukunaga, M.; Fukai, K.; Osakabe, Y.; Yamamura, K.; Koike, M.; Shibuya, S.; Shiramata, M.; Ono, Y.; Tsujimoto, Y.; Tadokoro, T.; Morishita, N.; Matsuo, Y.; Yumoto, I.; Sakazaki, S.; Atarashi, A.; Nabata, Y.; Okuda, N.; Fujita, A.; Matsuo, A.; Ishizawa, Y.; Shibata, H.; Ootsuka, M.; Taimatsu, R.; Takeuchi, A.; Sumi, Y.; Yamamoto, F.; Araki, Y.; Tanaka, A.; Kuroda, S.; Sakata, R.; Okada, N.; Sawada, Y.; Miyata, M.; Asayama, H.; Koga, N.; Miki, T.; Yamaguchi, N.; Hashimoto, A.; Fukuike, C.; Kubo, A.; Yamasaki, M.; Mori, Y.; Nakayama, S.; Kobayashi, Y.; Takenaka, S.; Mashima, M.; Katsuta, H.; Matsumura, T.; Yanagida, S.; Watanabe, N.; Kodama, S.; Kusano, M.; Yamamoto, N.; Kamada, R.; Suzuki, K.; Itami, K.; Hasebe, Y.; Fujita, N.; Kubota, S.; Usuki, A.; Okamoto, M.; Uno, S.; Chikuma, A.; Kishikawa, H.; Yano K Nakano, C.; Otaguro, M.; Kayashima, Y.; Shinoda, M.; Jaafar, S. M.; Baharuddin, S.; Gembor, J.; Ahmad, H.; Syed Mansor, S. M.; Abdullah, W. M.; Shafie, Z.; Muhamad Yunus, S.; Alwi, S. M.; Hussin, N.; Basri, N. A.; Ling Ling, L.; Naem, N. S.; Rutten, R.; Rademaker, H.; van Buijsen, M.; Scholten, M.; Stuij, S.; van Zeijst, M.; van Houwelingen, K.; Engelen, W.; Kramer, H.; Maassen, E.; Verhoeven, P.; Awater, J.; Terwisscha van Scheltinga, C.; Meijlis, P.; Blom, L.; Bos, M.; van der Wal, M.; van Laerhoven, G.; Jacobs, T.; Tan-Urgert, B.; van de Gaag, J.; den Boer, P.; Verlek, E.; Lardinois, R.; Coenjaerds, C.; Hendrick, R.; Schoep, J.; Froma, E.; van Nes, C.; Beuving, D.; Krikken, J.; Drent, I.; Geerlings, F.; Buvelot, S.; Wissenburg, A.; Dijkshoorn, A.; van Setten van der Meer, L.; Singerling, M.; van Wijk, D.; Bor, A.; Aukema-Wouda, Z.; Hendriks-van Woerden, M.; Kort, I.; Danse, I.; van der Knaap, M.; de Jong, C.; Temminck, M.; Schaefer, T.; van der Ven, N.; Drost, I.; Mulder, R.; de Vos, A.; de Hoop, M.; Post, G.; Wielandt, D.; Edorot, N.; de Castro, K.; Flotildes, M.; Mulingtapang, T.; Vasquez, S.; Facundo, S.; Peralta, M.; Jose, M.; Bandiez, J.; Sulit, P.; Joaquin, F.; Arbis, M. G.; Silva, C.; Delgado, D.; de Leon, R.; Maglasang, P.; Sian, A.; Alagban, C.; Alcorano, J.; Marcelo, M. J.; Dela Pena, C.; Hyra, I.; Malkiewicz, B.; Mosakowska, K.; Cana, I.; Dobrin, I.; Lautaru, A.; Manescu, G.; Samoila, N.; Lacatus, M.; Apostoie, A.; Prunoiu, M.; Tilinca, M.; Budeanu, A.; Nedelcu, C.; Dumitrache, N.; Boeru, L.; Zhuravleva, E.; Gundova, M.; Hoffmannova, J.; Svitkova, M.; Pekarova, T.; Ujacka, K.; Zsoriova, T.; Kubincova, K.; Jankovicova, Z.; Talliard, C.; Tyumbu, N.; Mngoma, N.; Kannemeyer, M.; Mostert, J.; Page, A.; Krahenbuhl, C.; Tredoux, C.; Hendricks, L.; Oliver, S.; Le Grange, M.; Naidoo, V.; Bae, Y.; Kim, H.; Lee, J.; Yu, N.; An, S.; Kim, E.; Yang, K.; Woo, J.; Kim, S.; Rasck, J.; Smetana, S.; Ajax, K.; Bylander, L.; Lindberg, A.; Dellborg, H.; Hultsberg-Olsson, G.; Harsmar, K.; Knutsson, A.; Håkansson, L.; Kåveryd-Holmström, M.; Lundmark, L. M.; Norrfors, B.; Löf, P.; Skoglund, K.; Torgersruud, M.; Johansson, K.; Mattsson, A.; Quist, M.; Haglund, P.; Lundell, L.; Gunvasdotter, S.; Rangman, B.; Liu, R.; Shi, J.; Förstedt, G.; Nylund, L.; Welin-Berger, B.; Nilsson, O.; Garcia-Värlid, A.; Forlenza, R.; Kaminska, K.; Nagorna, T.; Cottam, V.; Harper, R.; Gilchrist, M.; Musanhu, R.; Mackin, A.; Turner, A.; Willetts, S.; Cadd, A.; Evans, J.; Young, G.; Sevillano, A.; Brodie, K.; Eccles, A.; Kelly, S.; Doughty, A.; Gray, J.; Gibson, M.; Finlayson, M.; Domingo, D.; Brazee, L.; Renaud, K.; Doman, A.; Meyer, R.; Beatty, J.; Morgan, T.; Rodas, E.; Campbell, D.; Mcquarrie, M.; Battistelli, E.; Eisenbraun, P.; Farley, R.; Park, H.; Dwyer, J.; Adams, K.; Schneider, W.; Barbour, C.; Whyne, E.; Budzinski, S.; Craig, M.; Gilley Elmore, J.; Scott, D.; Bellini, S.; Pepper, M.; Gunderson, K.; Stipek, I.; Schwarz, L.; Watkins, K.; Moore, V.; Palao, A.; Keane-Richmond, P.; Franklin, L.; Ward, L.; Kostedt, G.; Bailey, S.; Hollenweger, L.; Solomon, A.; Johnson, D.; Gloer, K.; Meyer, M.; Boleyn, M.; Nieters, D.; Humphrey, K.; Bohn, A.; Mueller, G.; Mckenzie, H.; Edwards, T.; Velky, J.; Cole, C.; Diederick, M.; Burg, S.; Coulson, T.; Karunaratne, K.; Gunasekera, R.; Cook, S.; Fisher, S.; Garrison, K.; Passey, L.; Kuykendall, K.; Luck, K.; Ramia, L.; Joan, H.; Reynoso, F.; Farley, M.; Shuman, S.; Santana-Fernandes, E.; Ventimiglia, A.; Steele, V.; Gers, L.; Brown, P.; Wilson, J.; Freebersyser, J.; Reno, M.; Buettner, N.; McGovern, M.; Hubbard, T.; Elmore, H.; Payne, D.; Mccann, M.; Decker, S.; Sharp, A.; Forgey, E.; Broussard, E.; Juett, U.; Siddiqui, A.

    2017-01-01

    We evaluated whether rivaroxaban alone or in combination with aspirin would be more effective than aspirin alone for secondary cardiovascular prevention. In this double-blind trial, we randomly assigned 27,395 participants with stable atherosclerotic vascular disease to receive rivaroxaban (2.5 mg

  13. Stable classification of the energy-momentum tensor. Summary

    International Nuclear Information System (INIS)

    Guzman-Sanchez, A.R.; Przanowski, M.; Plevansky, J.

    1990-01-01

    Starting with the algebraic classification of the energy-momentum tensor given by Plebansky, it is established that this classification is unstable under versal deformations and a new (stable) classification is given. In order to keep the text to reasonable length, we just write the basic ideas and some results. (Author) (Author)

  14. ORIGINAL ARTICLE Fitted-Stable Finite Difference Method for ...

    African Journals Online (AJOL)

    Gemechis

    A fitted-stable central difference method is presented for solving singularly perturbed two point boundary value problems with the ..... Approximating the converted error term, which have the stabilizing effect (Choo and. Schultz, 1993), in Eq. (8) by using the ... is the local truncation error. Introducing the fitting factor σ into Eq.

  15. Robust chaos synchronization using input-to-state stable control

    Indian Academy of Sciences (India)

    In this paper, we propose a new input-to-state stable (ISS) synchronization method for a general class of chaotic systems with disturbances. Based on Lyapunov theory and linear matrix inequality (LMI) approach, for the first time, the ISS synchronization controller is presented not only to guarantee the asymptotic ...

  16. Modified calcium oxide as stable solid base catalyst for Aldol ...

    Indian Academy of Sciences (India)

    The influence of several reaction parameters, such as temperature, catalyst loading, was investigated. The humidity test over modified CaO reveals that the basic centres of modified CaO are stable for CO2 and moisture. From the results of Fourier transform-infrared (FT-IR) and Thermogravity analysis (TG) characterization, ...

  17. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2009-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeolimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteroic waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author). 56 refs., 11 figs., 2 tabs.

  18. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2004-01-01

    Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: thermometry, tracers, reaction mechanisms and chemostratigraphy. 52 refs., 11 figs., 2 tabs

  19. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2014-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteoric waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author)

  20. Stable isotope geochemistry: definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2015-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteoric waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author).

  1. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2012-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteoric waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author). 89 refs., 12 figs., 2 tabs.

  2. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2008-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeolimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteroic waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author). 56 refs., 11 figs., 2 tabs

  3. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2009-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeolimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteroic waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author). 56 refs., 11 figs., 2 tabs

  4. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2016-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteoric waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author).

  5. Stable isotope geochemistry : definitions, terminology, measurement and some applications

    International Nuclear Information System (INIS)

    Faure, K.

    2013-01-01

    In 1936, Alfred Nier produced the first precise measurement of isotope abundance ratios and his design still remains the basis of stable isotope mass spectrometry. With this gift from the physicists for routine measurement of isotope ratios, earth scientists began to explore the natural variations of isotopes. Thus began a new era in geoscience research with the hydrological cycle and marine palaeoclimatic research being the first topics to be investigated. Stable isotope measurements have been applied to many fundamental problems in geochemistry, petrology, and paleoclimatology, as well as related fields in archaeology, anthropology, physical chemistry, biology and forensic sciences. These applications can be broadly classified into four main types: 1. Thermometry: Formation temperatures of rock and mineral systems are determined on the basis of temperature-dependent fractionations of the isotopic ratios between two or more cogenetic phases. 2. Tracers: Reservoirs like the ocean, the mantle, meteoric waters and organic matter have distinct stable isotope signatures that can be used to trace the origin of rocks, fluids, contaminants etc. 3. Reaction mechanism: Distinctions can be made between diffusion and recrystallization, open and closed systems and bacterial and thermogenic processes. 4. Chemostratigraphy: Abrupt changes (excursions) in the stable isotope ratios of ocean sediments and certain terrestrial materials can be used as stratigraphic markers. (author). 91 refs., 12 figs., 2 tabs.

  6. Synthesis and characterization of stable aqueous dispersions of ...

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... A stable aqueous dispersion (5 mg ml−1) of graphene was synthesized by a simple protocol based on three-step reduction of graphene oxide (GO) dispersion synthesized using the modified version of Hummers and Offeman method. Reduction of GO was carried out using sodium borohydride, hydrazine ...

  7. The synthesis, characterization and biological evaluation of a stable ...

    African Journals Online (AJOL)

    A convenient one pot synthesis of two novel compounds including a stable phosphorus ylide and an imidazole from electron-poor acetylenes in fairly good yields by the condensation of triphenylphosphine and acetylene derivatives, in the presence of dimethyl thiourea from the 1:1:1 addition reactions is described.

  8. Development of redox stable, multifunctional substrates for anode supported SOFCS

    DEFF Research Database (Denmark)

    Sudireddy, Bhaskar Reddy; Foghmoes, Søren Preben Vagn; Ramos, Tania

    2017-01-01

    upon redox cycling, while other properties such as catalytic activity for methane reforming and/or water gas shift, thermal conductivity in addition to electronic conductivity for current pickup are highly wanted for SOFC applications. In order to combine the advantages of a redox stable anode...

  9. Synthesis and characterization of stable aqueous dispersions of ...

    Indian Academy of Sciences (India)

    Abstract. A stable aqueous dispersion (5 mg ml−1) of graphene was synthesized by a simple protocol based on three-step reduction of graphene oxide (GO) dispersion synthesized using the modified version of Hummers and Offeman method. Reduction of GO was carried out using sodium borohydride, hydrazine hydrate ...

  10. Quantum cohomology of moduli spaces of genus zero stable curves

    OpenAIRE

    Fontanari, Claudio

    2007-01-01

    We investigate the (small) quantum cohomology ring of the moduli spaces of stable n-pointed curves of genus 0. In particular, we determine an explicit presentation in the case n=5 and we outline a computational approach to the case n=6.

  11. A note on stable Teichmüller quasigeodesics

    Indian Academy of Sciences (India)

    Annual Meetings · Mid Year Meetings · Discussion Meetings · Public Lectures · Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Proceedings – Mathematical Sciences; Volume 123; Issue 1. A Note on Stable Teichmüller Quasigeodesics. Abhijit Pal. Volume 123 Issue 1 February 2013 ...

  12. Exhaled nitric oxide in stable chronic obstructive pulmonary disease

    International Nuclear Information System (INIS)

    Beg Mohammed F S; Alzoghaibi, Mohammad A; Habib, Syed S; Abba, Abdullah A

    2009-01-01

    The objective of the study was to test the hypothesis that fraction of exhaled nitric oxide (FENO) is elevated in nonsmoking subjects with stable chronic obstructive pulmonary disease (COPD) and compare it with the results in patients with asthma and a control population. Pulmonology Clinic at a University Hospital. Twenty five control subjects, 25 steroid naive asthmatics and 14 COPD patients were studied. All the patients were nonsmokers and stable at the time of the study. All subjects completed a questionnaire and underwent spirometry. Exhaled nitric oxide was measured online by chemiluminescence, using single-breath technique. All the study subjects were males. Subjects with stable COPD had significantly higher values of FENO than controls (56.54+ - 28.01 vs 22.00 + -6.69; P =0.0001) but lower than the subjects with asthma (56.54+ - 28.01 vs 84.78+ - 39.32 P 0.0285). The FENO values in COPD subjects were inversely related to the FEV 1 /FVC ratio. There was a significant overlap between the FENO values in COPD and the control subjects. There is a significant elevation in FENO in patients with stable COPD, but the elevation is less than in asthmatic subjects. Its value in clinical practice may be limited by the significant overlap with control subjects. (author)

  13. Comparing Fréchet and positive stable laws

    OpenAIRE

    Simon, Thomas

    2014-01-01

    To appear in Electronic Journal of Probability; Let ${\\bf L}$ be the unit exponential random variable and ${\\bf Z}_\\alpha$ the standard positive $\\alpha$-stable random variable. We prove that $\\{(1-\\alpha) \\alpha^{\\gamma_\\alpha} {\\bf Z}_\\alpha^{-\\gamma_\\alpha}, 0< \\alpha

  14. Stable soap and water sponges doped with metal nanoparticles

    NARCIS (Netherlands)

    Gaikwad, A.V.; Verschuren, P.; van der Loop, T.; Rothenberg, G.; Eiser, E.

    2009-01-01

    This paper presents various aspects of surfactant/oil/water L3 phases. Although these so-called sponge phases are usually stable only within a narrow temperature range, we show here that they can be stabilized over a larger phase space by doping with metal nanoparticle suspensions. We make and study

  15. Biosensors engineered from conditionally stable ligand-binding domains

    Energy Technology Data Exchange (ETDEWEB)

    Church, George M.; Feng, Justin; Mandell, Daniel J.; Baker, David; Fields, Stanley; Jester, Benjamin Ward; Tinberg, Christine Elaine

    2017-09-19

    Disclosed is a biosensor engineered to conditionally respond to the presence of specific small molecules, the biosensors including conditionally stable ligand-binding domains (LBDs) which respond to the presence of specific small molecules, wherein readout of binding is provided by reporter genes or transcription factors (TFs) fused to the LBDs.

  16. Some Stiffly Stable Second Derivative Continuous Linear Multistep ...

    African Journals Online (AJOL)

    Dr Grace Nwachukwu

    Based on Gear's fixed step size backward differentiation methods, Gear (1968), second derivative continuous ... whose solution is stiff, let us consider the family of hybrid second derivative continuous linear multistep methods. ( ) ...... The Numerical Integration of stiff Systems of ODEs using Stiffly Stable Continuous Second.

  17. Linear operator inequalities for strongly stable weakly regular linear systems

    NARCIS (Netherlands)

    Curtain, RF

    2001-01-01

    We consider the question of the existence of solutions to certain linear operator inequalities (Lur'e equations) for strongly stable, weakly regular linear systems with generating operators A, B, C, 0. These operator inequalities are related to the spectral factorization of an associated Popov

  18. Stable and sporadic symbiotic communities of coral and algal holobionts

    NARCIS (Netherlands)

    Hester, E.R.; Barott, K.L.; Nulton, J.; Vermeij, M.J.A.; Rohwer, F.L.

    2016-01-01

    Coral and algal holobionts are assemblages of macroorganisms and microorganisms, including viruses, Bacteria, Archaea, protists and fungi. Despite a decade of research, it remains unclear whether these associations are spatial-temporally stable or species-specific. We hypothesized that conflicting

  19. Stable isotopes in plant nutrition, soil fertility and environmental studies

    International Nuclear Information System (INIS)

    1991-01-01

    The individual contributions in these proceedings are indexed separately. Main topics covered include the measurement of biological nitrogen fixation, studies of soil organic matter, investigations of nutrient uptake and use by plants, studies of plant metabolism and new methodologies in the analysis of stable isotopes. Refs, figs and tabs

  20. Bias-corrected estimation of stable tail dependence function

    DEFF Research Database (Denmark)

    Beirlant, Jan; Escobar-Bach, Mikael; Goegebeur, Yuri

    2016-01-01

    We consider the estimation of the stable tail dependence function. We propose a bias-corrected estimator and we establish its asymptotic behaviour under suitable assumptions. The finite sample performance of the proposed estimator is evaluated by means of an extensive simulation study where...

  1. Modified calcium oxide as stable solid base catalyst for Aldol ...

    Indian Academy of Sciences (India)

    A highly efficient and stable solid-base catalyst for Aldol condensation was prepared by modifying commercial CaO with benzyl bromide in a simple way. It was found that modified CaO can effectively catalyse the Aldol condensation of cyclohexanone and benzaldehyde, as well as various benzaldehydes, to produce ...

  2. Assessing Sources of Human Methylmercury Exposure Using Stable Mercury Isotopes

    DEFF Research Database (Denmark)

    Li, Miling; Sherman, Laura S; Blum, Joel D

    2014-01-01

    Seafood consumption is the primary route of methylmercury (MeHg) exposure for most populations. Inherent uncertainties in dietary survey data point to the need for an empirical tool to confirm exposure sources. We therefore explore the utility of Hg stable isotope ratios in human hair as a new me...

  3. Characterization of a novel stable biocatalyst obtained by protein engineering

    NARCIS (Netherlands)

    Van den Burg, B; de Kreij, A; Van der Veek, P; Mansfeld, J; Venema, G

    Protein engineering is a powerful tool for the improvement of the properties of biocatalysts, Previously we have applied protein engineering technologies to obtain an extremely stable variant of the thermolysin-like protease from Bacillus stearothermophilus [Van den Burg, Vriend, Veltman, Venema and

  4. COMBINING SOURCES IN STABLE ISOTOPE MIXING MODELS: ALTERNATIVE METHODS

    Science.gov (United States)

    Stable isotope mixing models are often used to quantify source contributions to a mixture. Examples include pollution source identification; trophic web studies; analysis of water sources for soils, plants, or water bodies; and many others. A common problem is having too many s...

  5. Stable isotope customer list and summary of shipments, FY 1977

    Energy Technology Data Exchange (ETDEWEB)

    Davis, W.C.

    1978-04-01

    The compilation of stable isotope customers and shipments is divided into four parts. There are alphabetical lists of domestic and foreign customers, alphabetical list of isotopes with cross-references to customers, alphabetical list of states and customers with cross-reference to customers, and tabulation of shipments, quantities, and dollars. (JSR)

  6. Synthesis and characterization of thermally stable oligomer-metal ...

    African Journals Online (AJOL)

    Synthesis and characterization of thermally stable oligomer-metal complexes of copper(II), nickel(II), zinc(II) and cobalt(II) derived from oligo- p - nitrophenylazomethinephenol. ... Based on half degradation temperature parameters Cu(II) and Zn(II) complexes were more resistant than the others. KEY WORDS: Oligomer metal ...

  7. Ivabradine in stable coronary artery disease without clinical heart failure

    DEFF Research Database (Denmark)

    Fox, Kim; Ford, Ian; Steg, Philippe Gabriel

    2014-01-01

    BACKGROUND: An elevated heart rate is an established marker of cardiovascular risk. Previous analyses have suggested that ivabradine, a heart-rate-reducing agent, may improve outcomes in patients with stable coronary artery disease, left ventricular dysfunction, and a heart rate of 70 beats per m...

  8. Broken Homes: Stable Risk, Changing Reasons, Changing Forms.

    Science.gov (United States)

    Sweetser, Dorrian Apple

    1985-01-01

    Cohort membership and two measures of social disadvantage were used as explanatory variables in analysis of the risk of growing up in a broken home and of the living arrangements of children with broken homes. The risk of a broken home by age 16 proved to be stable across cohorts and greater for those from disadvantaged homes. (Author/BL)

  9. Incorporating stable isotopes into a multidisciplinary framework to ...

    African Journals Online (AJOL)

    Through its ability to address complex ecological questions and the possibility of analysing large sample sizes to understand population-level processes, the use of stable isotope analysis (δ13C and δ15N) has grown rapidly in recent years. Importantly, it is now becoming an accepted tool to derive data for conservation and ...

  10. Apparatus and method for monitoring of gas having stable isotopes

    Science.gov (United States)

    Clegg, Samuel M; Fessenden-Rahn, Julianna E

    2013-03-05

    Gas having stable isotopes is monitored continuously by using a system that sends a modulated laser beam to the gas and collects and transmits the light not absorbed by the gas to a detector. Gas from geological storage, or from the atmosphere can be monitored continuously without collecting samples and transporting them to a lab.

  11. Variation in carbon and nitrogen stable isotope ratios in flight ...

    African Journals Online (AJOL)

    bellied Sunbird to assess the value of using stable isotopes of feathers in avian dietary studies. Significant variation in δ13C and δ15N isotope values of flight feathers (range = 3.1‰ and 2.7‰, respectively) indicated that the source of carbon (i.e. ...

  12. [Stable Isotopes Characters of Soil Water Movement in Shijiazhuang City].

    Science.gov (United States)

    Chen, Tong-tong; Chen, Hui; Han, Lu; Xing, Xing; Fu, Yang-yang

    2015-10-01

    In this study, we analyzed the stable hydrogen and oxygen isotope values of precipitation, soil water, irrigation water that collected in Shijiazhuang City from April 2013 to May 2014 to investigate the changing rule of the stable isotopes in different soil profiles and the process of soil water movement according to using the isotope tracer technique. The results showed that the mean excess deuterium of the local precipitation was -6.188 5 per thousand. Those reflected that the precipitation in Shijiazhuang City mainly brought by the monsoon from the ocean surface moisture, and also to some extent by the local evaporation. Precipitation was the main source of the soil water and the irrigation water played the supplementary role. In the rainy season, precipitation was enough to supply the soil water. The stable oxygen isotopes at 10-100 cm depth decreased with the increase of depth, the maximum depth of evaporation in the rainy season reached 40 cm. The peak of stable oxygen isotopes of soil water pushed down along the profile, which was infected by the interaction of the precipitation infiltration, evaporation and the mixing water.

  13. A biomarker based on the stable isotopes of nickel

    Science.gov (United States)

    Cameron, Vyllinniskii; Vance, Derek; Archer, Corey; House, Christopher H.

    2009-01-01

    The new stable isotope systems of transition metals are increasingly used to understand and quantify the impact of primitive microbial metabolisms on the modern and ancient Earth. To date, little effort has been expended on nickel (Ni) isotopes but there are good reasons to believe that this system may be more straightforward, and useful in this respect, than some others. Here, we present Ni stable isotope data for abiotic terrestrial samples and pure cultures of methanogens. The dataset for rocks reveals little isotopic variability and provides a lithologic baseline for terrestrial Ni isotope studies. In contrast, methanogens assimilate the light isotopes, yielding residual media with a complementary heavy isotopic enrichment. Methanogenesis may have evolved during or before the Archean, when methane could have been key to Earth's early systems. Our data suggest significant potential in Ni stable isotopes for identifying and quantifying methanogenesis on the early planet. Additionally, Ni stable isotope fractionation may well prove to be the fundamental unambiguous trace metal biomarker for methanogens. PMID:19553218

  14. MixSIAR: advanced stable isotope mixing models in R

    Science.gov (United States)

    Background/Question/Methods The development of stable isotope mixing models has coincided with modeling products (e.g. IsoSource, MixSIR, SIAR), where methodological advances are published in parity with software packages. However, while mixing model theory has recently been ex...

  15. Using stable isotopes to examine watershed connectivity to downstream waters

    Science.gov (United States)

    Water bodies within the USA are protected by the US Clean Water Act when they have a significant nexus to downstream navigable waters. As a research scientist with the US Environmental Protection Agency, I have used water stable isotopes to examine hydrologic connectivity dynami...

  16. Copper stable isotopes to trace copper behavior in wetland systems.

    Science.gov (United States)

    Babcsányi, Izabella; Imfeld, Gwenaël; Granet, Mathieu; Chabaux, François

    2014-05-20

    Wetlands are reactive zones of the landscape that can sequester metals released by industrial and agricultural activities. Copper (Cu) stable isotope ratios (δ(65)Cu) have recently been used as tracers of transport and transformation processes in polluted environments. Here, we used Cu stable isotopes to trace the behavior of Cu in a stormwater wetland receiving runoff from a vineyard catchment (Alsace, France). The Cu loads and stable isotope ratios were determined in the dissolved phase, suspended particulate matter (SPM), wetland sediments, and vegetation. The wetland retained >68% of the dissolved Cu and >92% of the SPM-bound Cu, which represented 84.4% of the total Cu in the runoff. The dissolved Cu became depleted in (65)Cu when passing through the wetland (Δ(65)Cuinlet-outlet from 0.03‰ to 0.77‰), which reflects Cu adsorption to aluminum minerals and organic matter. The δ(65)Cu values varied little in the wetland sediments (0.04 ± 0.10‰), which stored >96% of the total Cu mass within the wetland. During high-flow conditions, the Cu flowing out of the wetland became isotopically lighter, indicating the mobilization of reduced Cu(I) species from the sediments and Cu reduction within the sediments. Our results demonstrate that the Cu stable isotope ratios may help trace Cu behavior in redox-dynamic environments such as wetlands.

  17. On the solution of high order stable time integration methods

    Czech Academy of Sciences Publication Activity Database

    Axelsson, Owe; Blaheta, Radim; Sysala, Stanislav; Ahmad, B.

    2013-01-01

    Roč. 108, č. 1 (2013), s. 1-22 ISSN 1687-2770 Institutional support: RVO:68145535 Keywords : evolution equations * preconditioners for quadratic matrix polynomials * a stiffly stable time integration method Subject RIV: BA - General Mathematics Impact factor: 0.836, year: 2013 http://www.boundaryvalueproblems.com/content/2013/1/108

  18. Exact solutions, energy, and charge of stable Q-balls

    Energy Technology Data Exchange (ETDEWEB)

    Bazeia, D.; Marques, M.A. [Universidade Federal da Paraiba, Departamento de Fisica, Joao Pessoa, PB (Brazil); Menezes, R. [Universidade Federal da Paraiba, Departamento de Ciencias Exatas, Rio Tinto, PB (Brazil); Universidade Federal de Campina Grande, Departamento de Fisica, Campina Grande, PB (Brazil)

    2016-05-15

    In this work we deal with nontopological solutions of the Q-ball type in two spacetime dimensions. We study models of current interest, described by a Higgs-like and other, similar potentials which unveil the presence of exact solutions. We use the analytic results to investigate how to control the energy and charge to make the Q-balls stable. (orig.)

  19. Superradiantly stable non-extremal Reissner-Nordstroem black holes

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Jia-Hui [School of Physics and Telecommunication Engineering, South China Normal University, Laboratory of Quantum Engineering and Quantum Materials, Guangzhou (China); Mai, Zhan-Feng [Beijing Normal University, Department of Physics, Center for Advanced Quantum Studies, Beijing (China)

    2016-06-15

    The superradiant stability is investigated for non-extremal Reissner-Nordstroem black holes. We use an algebraic method to demonstrate that all non-extremal Reissner-Nordstroem black holes are superradiantly stable against a charged massive scalar perturbation. This improves the results obtained before for non-extremal Reissner-Nordstroem black holes. (orig.)

  20. Hydrothermally stable molecular separation membranes from organically linked silica

    NARCIS (Netherlands)

    Castricum, H.L.; Ashima sah, A.S.; Kreiter, Robert; Blank, David H.A.; Vente, Jaap F.; ten Elshof, Johan E.

    2008-01-01

    A highly hydrothermally stable microporous network material has been developed that can be applied in energy-efficient molecular sieving. The material was synthesized by employing organically bridged monomers in acid-catalysed sol–gel hydrolysis and condensation, and is composed of covalently bonded

  1. Hydrothermally stable molecular separation membranes from organically linked silica

    NARCIS (Netherlands)

    Castricum, H.L.; Sah, A.; Kreiter, R.; Blank, D.H.A.; Vente, J.F.; ten Elshof, J.E.

    2008-01-01

    A highly hydrothermally stable microporous network material has been developed that can be applied in energy-efficient molecular sieving. The material was synthesized by employing organically bridged monomers in acid-catalysed sol-gel hydrolysis and condensation, and is composed of covalently bonded

  2. Development of stable marker-free nuclear transformation strategy ...

    African Journals Online (AJOL)

    To avoid the negative effects caused by the marker genes, we tried to develop a stable marker-free nuclear transformation system in Chlorella. For this, linear gene expression cassettes (LGEC) were constructed with functional domains, which are responsible for transformation, of SV40 large T antigen. The LGECs were ...

  3. Facies, dissolution seams and stable isotope compositions of the ...

    Indian Academy of Sciences (India)

    Stable isotope analysis of the limestone shows that 13C and 18O values are compatible with the early Mesoproterozoic open seawater composition. The ribbon limestone facies in the Rohtas Limestone is characterized by micritic beds, each decoupled in a lower band enriched and an upper band depleted in dissolution ...

  4. A balanced approach to the management of patients with stable ...

    African Journals Online (AJOL)

    2009-02-23

    Feb 23, 2009 ... The issue of the optimal management of patients with chronic stable coronary disease remains unsettled. There are strongly held views, and much emotive language is used in discussion. Not all opinions are entirely objective and practitioners' self-interest is all too often a powerful driver of the discussion.

  5. A comparison of stable platform and strapdown airborne gravity

    DEFF Research Database (Denmark)

    Glennie, C.L.; Schwarz, K.P.; Bruton, A.M.

    2000-01-01

    To date, operational airborne gravity results have been obtained using either a damped two-axis stable platform gravimeter system such as the LaCoste and Romberg (LCR) S-model marine gravimeter or a strapdown inertial navigation system (INS), showing comparable accuracies. In June 1998 three flig...

  6. Antibiotic therapy for stable non-CF bronchiectasis in adults

    DEFF Research Database (Denmark)

    Fjaellegaard, Katrine; Sin, Melda Dönmez; Browatzki, Andrea

    2017-01-01

    To provide an update on efficacy and safety of antibiotic treatments for stable non-cystic fibrosis (CF) bronchiectasis (BE). Systematic review based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses guidelines was done. Twenty-six studies (1.898 patients) fulfilled...

  7. use of safety first rule in selecting stable barley cultivars

    African Journals Online (AJOL)

    1993-06-13

    Jun 13, 1993 ... or bankruptcy are associated with low yields, which likelyisthecaseforsubsistence farmers. RESULTS. The indices as well as the mean yield indicated the high yielding potential forB3072 as well as its stability, the low yielding and less stable lines were also indicated (Tables 2 and 3). The EV, FWand SH ...

  8. Modified yupingfeng formula for the treatment of stable chronic ...

    African Journals Online (AJOL)

    The following outcomes were evaluated: (1) lung function; (2) 6-minute walk distance (6MWD); (3) effective rate; (4) serum levels of IgA, IgG and IgE; and (5) adverse ... when combined with Western medications can provide more benefits for patients with stable COPD, without any serious adverse reactions being identified.

  9. Stable isotope paleoaltimetry of the Mount Everest region

    Science.gov (United States)

    Gebelin, A.; Mulch, A.; Teyssier, C.; Jessup, M. J.; Law, R. D.; Brunel, M.

    2012-12-01

    Long-term climatic evolution and atmospheric circulation patterns are influenced to a first order by the topography of the largest mountain ranges. Reconstructing the Neogene elevation history of the Mount Everest region is of particular interest for understanding the tectonic history of the Himalaya-Tibet orogen as well as global scale atmospheric circulation and biotic changes through time. Stable isotope paleoaltimetry uses the isotopic lapse rate of precipitations preserved in the near-surface record. In the absence of surface deposits such as paleosols, volcanic ashes, or lacustrine limestone that record the stable isotopic composition of early to mid-Miocene water preserved in the highly erosive Himalayan range, we conduct stable-isotope paleoaltimetry based on the hydrogen isotopic composition (δD) of hydrous minerals that crystallized in the South Tibetan detachment (STD) shear zone at ~17 Ma. For paleoaltimetry reconstruction we compare stable isotope records from the STD mylonitic footwall to age-equivalent oxygen isotope ratios (δ18O) measured within pedogenic carbonate from Siwalik foreland paleosols that developed near Miocene sea level. The relative differences between meteoric water compositions in the foreland basin and the δ18Owater calculated from the hydrogen isotope composition of syntectonic minerals suggest that by ~17 Ma the central Himalaya was at an elevation similar to what it is today, and that a rain shadow likely existed at that time. Our results demonstrate the power of shear-zone based paleoaltimetry in eroded mountain belts, call for caution in interpreting basin-based stable isotope paleoaltimetry in the rain shadow of the mid-Miocene Himalayan range and suggest that strengthening of the South Asian monsoon may have occurred in early to mid-Miocene, earlier than previously thought.

  10. Stable isotope composition of human fingernails from Slovakia

    Energy Technology Data Exchange (ETDEWEB)

    Grolmusová, Zuzana, E-mail: zuzana.grolmusova@geology.sk [Comenius University in Bratislava, Faculty of Mathematics, Physics and Informatics, Department of Experimental Physics, Mlynská dolina F2, 842 48 Bratislava (Slovakia); State Geological Institute of Dionýz Štúr, Laboratory of Isotope Geology, Mlynská dolina 1, 817 04 Bratislava (Slovakia); Rapčanová, Anna [Comenius University in Bratislava, Faculty of Mathematics, Physics and Informatics, Department of Experimental Physics, Mlynská dolina F2, 842 48 Bratislava (Slovakia); Michalko, Juraj; Čech, Peter [State Geological Institute of Dionýz Štúr, Laboratory of Isotope Geology, Mlynská dolina 1, 817 04 Bratislava (Slovakia); Veis, Pavel [Comenius University in Bratislava, Faculty of Mathematics, Physics and Informatics, Department of Experimental Physics, Mlynská dolina F2, 842 48 Bratislava (Slovakia); State Geological Institute of Dionýz Štúr, Laboratory of Isotope Geology, Mlynská dolina 1, 817 04 Bratislava (Slovakia)

    2014-10-15

    Stable isotope composition of human fingernails has proven to be useful for documenting human dietary information and geographical patterns in archeological, forensic, anthropological and biological studies. Therefore, it is of interest to detect all factors influencing the stable isotopic composition in the certain regions in the world. Carbon and nitrogen isotope data of human fingernail keratin from 52 individuals from Slovakia were reported in this study. The online combustion and continuous flow isotope-ratio mass spectrometer Delta V Advantage was used for δ{sup 13}C and δ{sup 15}N analysis of fingernail keratin samples from 24 vegetarian and 28 omnivorous individuals. A group of people with frequent meat consumption showed enrichment in {sup 13}C and {sup 15}N isotopes in fingernails. A similar trend was observed with increasing seafood in an individual's diet. Moreover a significant difference was revealed between smokers and nonsmokers for both δ{sup 13}C and δ{sup 15}N values. These data were compared to previously published δ{sup 13}C and δ{sup 15}N fingernail values from across the globe. This study brings new information on the stable isotope signature of individuals from Slovakia and characterizes the Central European region for the first time. The stable isotope composition of fingernails is influenced by the frequency of meat and seafood consumption as well as smoking. - Highlights: • This study deals with stable isotope analyses of fingernails from Slovak volunteers. • δ{sup 13}C and δ{sup 15}N values of vegetarian and omnivore fingernails were compared. • Influence of sex, diet and smoking was studied.

  11. Intermittent Turbulence in the Very Stable Ekman Layer

    Energy Technology Data Exchange (ETDEWEB)

    Barnard, James C [Univ. of Washington, Seattle, WA (United States)

    2001-01-01

    This study describes a Direct Numerical Simulation (DNS) of a very stable Ekman layer in which a constant downward heat flux is applied at the lower boundary, thus cooling the fluid above. Numerical experiments were performed in which the strength of the imposed heat flux was varied. For downward heat fluxes above a certain critical value the turbulence becomes intermittent and, as the heat flux increases beyond this value, the flow tends to relaminarize because of the very strong ambient stratification. We adopt Mahrt?s (1999) definition of the very stable boundary layer as a boundary layer in which intermittent, rather than continuous turbulence, is observed. Numerical experiments were used to test various hypothesis of where in ?stability parameter space? the very stable boundary layer is found. These experiments support the findings of Howell and Sun (1999) that the boundary layer will exhibit intermittency and therefore be categorized as ?very stable?, when the stability parameter, z/L, exceeds unity. Another marker for the very stable boundary layer, Derbyshire?s (1990) maximum heat flux criterion, was also examined. Using a case study drawn from the simulations where turbulence intermittency was observed, the mechanism that causes the intermittence was investigated. It was found that patchy turbulence originates from a vigorous inflectional, Ekman-like instability -- a roll cell -- that lifts colder air over warmer air. The resulting convective instability causes an intense burst of turbulence. This turbulence is short-lived because the lifting motion of the roll cell, as well as the roll cell itself, is partially destroyed after the patchy turbulence is generated. Examples of intermittent turbulence obtained from the simulations appear to be consistent with observations of intermittency even though the Reynolds number of the DNS is relatively low (400).

  12. Stable isotope composition of human fingernails from Slovakia

    International Nuclear Information System (INIS)

    Grolmusová, Zuzana; Rapčanová, Anna; Michalko, Juraj; Čech, Peter; Veis, Pavel

    2014-01-01

    Stable isotope composition of human fingernails has proven to be useful for documenting human dietary information and geographical patterns in archeological, forensic, anthropological and biological studies. Therefore, it is of interest to detect all factors influencing the stable isotopic composition in the certain regions in the world. Carbon and nitrogen isotope data of human fingernail keratin from 52 individuals from Slovakia were reported in this study. The online combustion and continuous flow isotope-ratio mass spectrometer Delta V Advantage was used for δ 13 C and δ 15 N analysis of fingernail keratin samples from 24 vegetarian and 28 omnivorous individuals. A group of people with frequent meat consumption showed enrichment in 13 C and 15 N isotopes in fingernails. A similar trend was observed with increasing seafood in an individual's diet. Moreover a significant difference was revealed between smokers and nonsmokers for both δ 13 C and δ 15 N values. These data were compared to previously published δ 13 C and δ 15 N fingernail values from across the globe. This study brings new information on the stable isotope signature of individuals from Slovakia and characterizes the Central European region for the first time. The stable isotope composition of fingernails is influenced by the frequency of meat and seafood consumption as well as smoking. - Highlights: • This study deals with stable isotope analyses of fingernails from Slovak volunteers. • δ 13 C and δ 15 N values of vegetarian and omnivore fingernails were compared. • Influence of sex, diet and smoking was studied

  13. Stable-channel design in gravel-bed rivers

    Science.gov (United States)

    Griffiths, George A.

    1981-07-01

    Regime relations are derived for more or less straight, stable, symmetrical, wide reaches of coarse gravel-bed rivers having low rates of bedload transport at bankfull flow conditions. The relations are combined to express channel width as a function of median size of bed pavement, energy slope and bankfull water discharge, for sediment of constant specific gravity. This stable-channel design equation, together with three others of similar form in current usage, is tested for accuracy of channel width prediction with 60 field data sets from appropriate gravel-bed river reaches. The minimum mean deviation of predicted width, from the actual width prescribed in each data set, was 160%, with a standard deviation of 430%. A dimensionless stability index, defined in terms of the above parameters, is deduced and shown to be remarkably constant in value at stable reach sections on particular gravel-bed rivers, and for rivers within a single watershed. Employment of this index will result in a substantial improvement in the accuracy of stable-channel design. The range of application of the stability index method is increased by a combination with an empirical equation that predicts median bed-pavement size, from given flow conditions over gravel-bed material having a known initial sediment size distribution. An example of the suggested design procedure, following from this combination, is given for an existing unstable river-diversion channel. Some recommendations are made concerning the identification of stable river reaches and the determination of the requisite sediment parameters for design.

  14. Physics design of APT linac with normal conducting rf cavities

    International Nuclear Information System (INIS)

    Nath, S.; Billen, J.H.; Stovall, J.E.; Takeda, Harunori; Young, L.M.

    1996-01-01

    The accelerator based production of tritium calls for a high-power, cw proton linac. Previous designs for such a linac use a radiofrequency quadrupole (RFQ), followed by a drift-tube linac (DTL) to an intermediate energy and a coupled-cavity linc (CCL) to the final energy. The Los Alamos design uses a high-energy (6.7 MeV) RFQ followed by the newly developed coupled-cavity drift-tube linac (CCDTL) and a CCL. This design accommodates external electromagnetic quadrupole lenses which provide a strong uniform focusing lattice from the end of the RFQ to the end of the CCL. The cell lengths in linacs of traditional design are typically graded as a function of particle velocity. By making groups of cells symmetric in both the CCDTL and CCL, the cavity design as well as mechanical design and fabrication is simplified without compromising the performance. At higher energies, there are some advantages of using superconducting rf cavities. Currently, such schemes are under vigorous study. This paper describes the linac design based on normal conducting cavities and presents simulation results

  15. Science opportunities at high power accelerators like APT

    International Nuclear Information System (INIS)

    Browne, J.C.

    1996-01-01

    This paper presents applications of high power RF proton linear accelerators to several fields. Radioisotope production is an area in which linacs have already provided new isotopes for use in medical and industrial applications. A new type of spallation neutron source, called a long-pulse spallation source (LPSS), is discussed for application to neutron scattering and to the production and use of ultra-cold neutrons (UCN). The concept of an accelerator-driven, transmutation of nuclear waste system, based on high power RF linac technology, is presented along with its impact on spent nuclear fuels

  16. Simulation of temperature conditions on APT of HMA mixes

    CSIR Research Space (South Africa)

    Steyn, WJVDM

    2008-10-01

    Full Text Available The objectives of this paper is to provide guidance on the practical management of temperature (pavement and loading tires) in Heavy Vehicle Simulator (HVS) tests, the potential effects of these temperatures on the outcomes of the test and the links...

  17. APT target blanket module fabrication and characterization of prototypical assemblies

    International Nuclear Information System (INIS)

    Fisher, D.L.

    1999-01-01

    Practical aspects of producing tritium with a linear accelerator were studied recently as part of the US Department of Energy's Accelerator production of Tritium program. The concept uses the neutrons produced by an energetic accelerator beam striking target material, to convert He 3 gas to tritium. Design requirements for the modular assemblies that surround the target posed some challenges in fabrication. Small-scale modules fabricated for accelerator tests were followed by production-scale modules, built to identify preferred fabrication and assembly processes. Casting, used successfully in the small modules, displayed distinct disadvantages with production-scale parts, and was replaced by extrusion. Machining and welding were minimized, extrusion was incorporated for lead cores and aluminum housings, and the modules were assembled manually. Two prototypical production-scale blanket modules and one tritium production module were fabricated to demonstrate the recommended techniques

  18. Neutronic design of the APT Target/Blanket

    International Nuclear Information System (INIS)

    Pitcher, E.J.; Russell, G.J.; Kidman, R.B.; Ferguson, P.D.

    1997-01-01

    The primary function of the Accelerator Production of Tritium Target/Blanket assembly is the safe and efficient production of tritium. The T/B accepts a 1.7-GeV, 100-mA proton beam and produces neutrons via the spallation process. These neutrons then react with 3 He to produce tritium. Neutronic optimization of the T/B is achieved by efficiently using the proton beam to produce neutrons and then, once produced, assuring that they are captured mostly by 3 He. This optimization must occur within the constraints imposed by engineering considerations such as heat flux limits, structural integrity, fabricability, and safe and reliable operation. The target/blanket achieves these goals with a neutron production rate that is 75% of that achievable with an ideal target, and a neutronic efficiency of 84%, leading to an overall tritium production rate that is 63% of the theoretical maximum

  19. Interactive visualization of APT data at full fidelity

    International Nuclear Information System (INIS)

    Bryden, Aaron; Broderick, Scott; Suram, Santosh K.; Kaluskar, Kaustubh; LeSar, Richard; Rajan, Krishna

    2013-01-01

    Understanding the impact of noise and incomplete data is a critical need for using atom probe tomography effectively. Although many tools and techniques have been developed to address this problem, visualization of the raw data remains an important part of this process. In this paper, we present two contributions to the visualization of data acquired through atom probe tomography. First, we describe the application of a rendering technique, ray-cast spherical impostors, that enables the interactive rendering of large numbers (as large as 10 million plus) of pixel perfect, lit spheres representing individual atoms. This technique is made possible by the use of a consumer-level graphics processing unit (GPU), and it yields an order of magnitude improvement both in render quality and speed over techniques previously used to render spherical glyphs in this domain. Second, we present an interactive tool that allows the user to mask, filter, and colorize the data in real time to help them understand and visualize a precise subset and properties of the raw data. We demonstrate the effectiveness of our tool through benchmarks and an example that shows how the ability to interactively render large numbers of spheres, combined with the use of filters and masks, leads to improved understanding of the three-dimensional (3D) and incomplete nature of atom probe data. This improvement arises from the ability of lit spheres to more effectively show the 3D position and the local spatial distribution of individual atoms than what is possible with point or isosurface renderings. The techniques described in this paper serve to introduce new rendering and interaction techniques that have only recently become practical as well as new ways of interactively exploring the raw data. - Highlights: ► Application of spherical impostor rendering to atom probe data visualization. ► Presented an interactive tool for visualizing atom probe tomography data. ► Presented a comparison of rendering performance of our tool with commercial tools. ► An example of how our tool can be used to understand atom probe tomography data

  20. 3D-modeling for the LANL-APT RFQ

    International Nuclear Information System (INIS)

    Krawczyk, F.L.; Young, L.M.

    1996-01-01

    An 8-m-long 4-vane radio frequency quadrupole (RFQ) has been proposed by LANL for use in high-current proton accelerators. This RFQ is made up of four 2-m-long coupled segments; the end regions and segment joints need full 3D modeling. In this paper, the strategies for piecewise treatment of the RFQ and results of the modeling are presented

  1. APT analysis of WC-Co based cemented carbides.

    Science.gov (United States)

    Weidow, Jonathan; Andrén, Hans-Olof

    2011-05-01

    A method for quickly producing sharp and site-specific atom probe specimens from WC-Co based cemented carbides was developed using a combination of electropolishing, controlled back-polishing and FIB milling. Also, a method for measuring the amount of segregated atoms to an interface between two phases with a big difference in field needed for field evaporation was developed. Using atom probe tomography, the interface chemistry of WC/WC grain boundaries, WC/(M,W)C phase boundaries and WC/binder phase boundaries was analysed. In addition, the transition metal solubility in WC was determined. Copyright © 2011 Elsevier B.V. All rights reserved.

  2. APT analysis of WC-Co based cemented carbides

    Energy Technology Data Exchange (ETDEWEB)

    Weidow, Jonathan, E-mail: jonathan.weidow@chalmers.se [Department of Applied Physics, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden); Andren, Hans-Olof [Department of Applied Physics, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden)

    2011-05-15

    A method for quickly producing sharp and site-specific atom probe specimens from WC-Co based cemented carbides was developed using a combination of electropolishing, controlled back-polishing and FIB milling. Also, a method for measuring the amount of segregated atoms to an interface between two phases with a big difference in field needed for field evaporation was developed. Using atom probe tomography, the interface chemistry of WC/WC grain boundaries, WC/(M,W)C phase boundaries and WC/binder phase boundaries was analysed. In addition, the transition metal solubility in WC was determined. -- Research highlights: {yields} We develop a method for producing specimens from WC-Co based cemented carbides. {yields} Measure segregated atoms to an interface between phases with different field evaporation field. {yields} The interface chemistry in cemented carbides. {yields} The transition metal solubility in WC.

  3. Manual for the Use of Stable Isotopes in Entomology

    International Nuclear Information System (INIS)

    2009-06-01

    result of problem driven inquisitiveness and technological advances, and are framed by the social and political environment. Although the external environment may mould the technological path, a technology will only become obsolete if there are viable substitution products or methods. Stable isotope methods are a substitute for many radionuclide methods. The progress made in stable isotope science over the past twenty years is a direct result of the interplay of the above factors. Stable isotopes are omnipresent in the environment and pose no health or environmental risks. Advances in isotope ratio mass spectrometry in terms of detection, accuracy and automation have broadened experimental possibilities immensely over the past twenty years. It was recognised that there was significant potential for answering many of the entomologist?s biological and ecological questions using stable isotopes, an expertise the Soil Science Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory in Seibersdorf had long fostered; therefore collaboration with the Entomology Unit at the same Laboratory was established. A number of collaborative experiments were carried and subsequently published. It was soon recognised that stable isotopes have tremendous potential in entomological research and although there were numerous studies using stable isotopes in ecology, their use in entomology per se was limited. Thus it was felt that a publication was required to make stable isotope techniques more widely known among entomologists. This manual will attempt to provide an introduction to the use of stable isotopes in entomological research. It will strive to communicate the basic principles and techniques of stable isotope science and provide a springboard for further interest and research in this area

  4. Construction of energy-stable Galerkin reduced order models.

    Energy Technology Data Exchange (ETDEWEB)

    Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan; van Bloemen Waanders, Bart Gustaaf

    2013-05-01

    This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolic or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed

  5. Membrane-sculpting BAR domains generate stable lipid microdomains

    DEFF Research Database (Denmark)

    Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V.

    2013-01-01

    Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR...... domains can generate extremely stable lipid microdomains by "freezing" phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced...... phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved...

  6. Development of stable isotope separation technology for radioisotope production

    International Nuclear Information System (INIS)

    Jeong, Do Young; Kim, Cheol Jung; Park, Kyung Bae

    2003-05-01

    The ultimate goal of this project is to construct the domestic production system of stable isotopes O-18 and Tl-203 used as target materials in accelerator for the production of medical radioisotopes F-18 and Tl-201, respectively. In order to achieve this goal, diode laser spectroscopic analytical system was constructed and automatic measurement computer software for the direct analysis of H 2 16 O/H 2 18 O ratio were developed. Distillation process, laser process, and membrane diffusion process were analyzed for the evaluation of O-18 production. And electromagnetic process, plasma process, and laser process were analyzed for the evaluation of Tl-203 production. UV laser system, IR laser system, and detailed system Tl-203 production were designed. Finally, current and future worldwide demand/supply of stable isotopes O-18 and Tl-203 were estimated

  7. England and Wales: Stable fertility and pronounced social status differences

    Directory of Open Access Journals (Sweden)

    Wendy Sigle-Rushton

    2008-07-01

    Full Text Available For nearly three decades, the total fertility rate in England and Wales has remained high relative to other European countries, and stable at about 1.7 births per woman. In this chapter, we examine trends in both period and cohort fertility throughout the twentieth century, and demonstrate some important differences across demographic and social groups in the timing and quantum of fertility. Breaking with a market-oriented and laissez-faire approach to work and family issues, the last 10 years have seen the introduction of new social and economic policies aimed at providing greater support to families with children. However, the effect of the changes is likely to be limited to families on the lower end of the income scale. Rather than facilitating work and parenthood, some policies create incentives for a traditional gendered division of labour. Fertility appears to have remained stable despite, rather than because of, government actions.

  8. Study on stable fly eradication by sterile-male technique

    International Nuclear Information System (INIS)

    Chung, K.H.; Ryu, J.; Kwon, S.H.

    1975-01-01

    This experiment was performed to investigate the X-ray sensitivities at the various stages of life cycle and to determine the sterillizing dose of stable fly, Stomoxys calcitrans(L). A dose of 300 rad caused about 50% mortality in 2-hour-old eggs as measured by egg hatch, and 100% mortality was obtained with a dose of 1 Krad. Sub-lethal dose (LDsub(50)) for the pupal age at irradiation. A significant reduction of egg hatch by 1.5% was observed when treated males with 3 Krad at pupal stage were mated to untreated virgin females. On the other hand, 100% sterility in females was resulted by Krad irradiation and oviposition was completely inhibited with 3 Krad. Thus, both sexes of stable fly could be sterilized with a dose of 4 Krad irradiated 50 3-5 days old pupae. (author)

  9. Unconditionally stable diffusion-acceleration of the transport equation

    International Nuclear Information System (INIS)

    Larson, E.W.

    1982-01-01

    The standard iterative procedure for solving fixed-source discrete-ordinates problems converges very slowly for problems in optically thick regions with scattering ratios c near unity. The diffusion-synthetic acceleration method has been proposed to make use of the fact that for this class of problems, the diffusion equation is often an accurate approximation to the transport equation. However, stability difficulties have historically hampered the implementation of this method for general transport differencing schemes. In this article we discuss a recently developed procedure for obtaining unconditionally stable diffusion-synthetic acceleration methods for various transport differencing schemes. We motivate the analysis by first discussing the exact transport equation; then we illustrate the procedure by deriving a new stable acceleration method for the linear discontinuous transport differencing scheme. We also provide some numerical results

  10. A simple route to prepare stable hydroxyapatite nanoparticles suspension

    Science.gov (United States)

    Han, Yingchao; Wang, Xinyu; Li, Shipu

    2009-07-01

    A simple ultrasound assisted precipitation method with addition of glycosaminoglycans (GAGs) is proposed to prepare stable hydroxyapatite (HAP) nanoparticles suspension from the mixture of Ca(H2PO4)2 solution and Ca(OH)2 solution. The product was characterized by XRD, FT-IR, TEM, HRTEM and particle size, and zeta potential analyzer. TEM observation shows that the suspension is composed of 10-20 nm × 20-50 nm short rod-like and 10-30 nm similar spherical HAP nanoparticles. The number-averaged particle size of stable suspension is about 30 nm between 11.6 and 110.5 nm and the zeta potential is -60.9 mV. The increase of stability of HAP nanoparticles suspension mainly depends on the electrostatic effect and steric effect of GAGs. The HAP nanoparticles can be easily transported into the cancer cells and exhibit good potential as gene or drug carrier system.

  11. PRIORITY DIRECTIONS OF PROVISION OF STABLE LAND USE

    Directory of Open Access Journals (Sweden)

    L. Hun’ko

    2016-10-01

    Full Text Available The conditions of stable land use are highlighted in this article. The question of the territory of agricultural enterprises is considered as well. The characteristic of the type of land use is given here. The recommendations are shown on the formation of ecologically safe types of land use. In the terms of new land relations is important to resolve the issue of land use regulation to with stand landscapes against adverse natural and anthropogenic influences. The main instrument of the state, which aims to provide an ecologically permissible and economically effective land use, land use is as an important component of land relations. Planning should include a system of legal, technical, economic and environmental activities that will ensure the preservation, restoration and rational use of land and other natural resources for the benefit of the whole society. Keywords: land use, land management, stable development, landscape, soil erosion, protection of land.

  12. Stereoselective synthesis of stable-isotope-labeled amino acids

    International Nuclear Information System (INIS)

    Unkefer, C.J.; Martinez, R.A.; Silks, L.A. III; Lodwig, S.N.

    1994-01-01

    For magnetic resonance and vibrational spectroscopies to reach their full potential, they must be used in combination with sophisticated site-specific stable isotope labeling of biological macromolecules. Labeled amino acids are required for the study of the structure and function of enzymes and proteins. Because there are 20 common amino acids, each with its own distinguishing chemistry, they remain a synthetic challenge. The Oppolzer chiral auxiliary provides a general tool with which to approach the synthesis of labeled amino acids. By using the Oppolzer auxiliary, amino acids can be constructed from several small molecules, which is ideal for stable isotope labeling. In addition to directing the stereochemistry at the α-carbon, the camphorsultam can be used for stereo-specific isotope labeling at prochiral centers in amino acids. By using the camphorsultam auxiliary we have the potential to synthesize virtually any isotopomer of all of the common amino acids

  13. MR imaging of stable posttraumatic spinal cord injury

    International Nuclear Information System (INIS)

    Braun, I.F.; Hoffman, J.C. Jr.; Murphy, C.; Davis, P.C.

    1986-01-01

    Posttraumatic spinal cord cysts have been thought to be infrequent sequelae of spinal trauma. To evaluate the incidence of spinal cord abnormalities in patients who have previously sustained cord trauma, the authors studied the incidence of these changes in clinically stable patients following injury. Twenty-five patients with a history of previous cord injury and stable neurologic status volunteered for MR imaging studies. Studies performed using a 0.5-T and 1.5-T unit revealed focal kinking of the cord at the trauma site as well as intramedullary hypointense areas on T1-weighted images in most volunteers. There was close clinical correlation between MR imaging findings and experimental pathologic data, which suggests that these lesions are much more prevalent than once thought

  14. Stable sheath formation in expanding magnetic field to divertor plate

    International Nuclear Information System (INIS)

    Tomita, Y.; Takayama, A.; Takamaru, H.; Sato, T.

    2002-01-01

    The stable sheath formation and the effects of charge exchange collisions of ions with cold neutrals for the stable presheath formation in an expanding magnetic field towards a divertor plate is studied by a one-dimensional analysis. The requirement for flow velocity of ions at a plasma-sheath boundary is more restricted than that of the uniform magnetic field, which should be greater than the ion sound speed. The difference, however, between both cases is an order of the Debye length to plasma radius, which is negligibly small. The requirement for ion flow velocity inside a quasi-neutral plasma is investigated by taking into account the effects of the charge exchange collisions. Without neutrals in the quasi-neutral plasma, the ion flow velocity at an injection point should be much greater than the ion sound speed. The unisotropic velocity distribution of injected ions with coupling the expanding magnetic field and the charge exchange collisions might mitigate this requirement. (orig.)

  15. Trophic position of coexisting krill species: a stable isotope approach

    DEFF Research Database (Denmark)

    Agersted, Mette Dalgaard; Bode, Antonio; Nielsen, Torkel Gissel

    2014-01-01

    .2) indicating carnivory, while T. inermis (TP = 2.4 ± 0.3) had a more omnivorous diet. In turn, T. longicaudata and T. raschii (TP = 2.2 ± 0.2) were herbivorous. Along the fjord, nutrient and plankton composition affected trophic position. Thysanoessa longicaudata was more omnivorous offshore than inshore where......Four krill species with overlapping functional biology coexist in Greenland waters. Here, we used stable isotopes to investigate and discuss their trophic role and mode of coexistence. Bulk carbon (δ13C) and nitrogen (δ15N) stable isotope analyses of Thysanoessa longicaudata, T. inermis, T. raschii...... and Meganyctiphanes norvegica sampled in June 2010 in the Godthåbsfjord, SW Greenland revealed new insight into their trophic roles and positions. There was a general positive correlation between body length and trophic position. The largest species M. norvegica had the highest trophic position (TP = 2.8 ± 0...

  16. Testbed for High-Acuity Imaging and Stable Photometry

    Science.gov (United States)

    Gregory, James

    This proposal from MIT Lincoln Laboratory (LL) accompanies the NASA/APRA proposal enti-tled THAI-SPICE: Testbed for High-Acuity Imaging - Stable Photometry and Image-Motion Compensa-tion Experiment (submitted by Eliot Young, Southwest Research Institute). The goal of the THAI-SPICE project is to demonstrate three technologies that will help low-cost balloon-borne telescopes achieve diffraction-limited imaging: stable pointing, passive thermal stabilization and in-flight monitoring of the wave front error. This MIT LL proposal supplies a key element of the pointing stabilization component of THAI-SPICE: an electronic camera based on an orthogonaltransfer charge-coupled device (OTCCD). OTCCD cameras have been demonstrated with charge-transfer efficiencies >0.99999, noise of 90%. In addition to supplying a camera with an OTCCD detector, MIT LL will help with integration and testing of the OTCCD with the THAI-SPICE payload’s guide camera.

  17. Fractionation of Stable Isotopes in Atmospheric Aerosol Reactions

    DEFF Research Database (Denmark)

    Meusinger, Carl

    Aerosols - particles suspended in air - are the single largest uncertainty in our current understanding of Earth's climate. They also affect human health, infrastructure and ecosystems. Aerosols are emitted either directly into the atmosphere or are formed there for instance in response to chemical...... reactions and undergo complex chemical and physical changes during their lifetimes. In order to assess processes that form and alter aerosols, information provided by stable isotopes can be used to help constrain estimates on the strength of aerosol sources and sinks. This thesis studies (mass......-independent) fractionation processes of stable isotopes of C, N, O and S in order to investigate three different systems related to aerosols: 1. Post-depositional processes of nitrate in snow that obscure nitrate ice core records 2. Formation and aging of secondary organic aerosol generated by ozonolysis of X...

  18. Application of Stable Isotope Signatures in Food Traceability

    International Nuclear Information System (INIS)

    Nazaratul Ashifa Abdullah Salim; Roslanzairi Mostapha; Zainon Othman; Nor Afiqah Harun; Mohd Suhaimi Hamzah; Shamsiah Abdul Rahman; Md Suhaimi Elias; Salmah Moosa

    2015-01-01

    Stable isotope analysis has widely been used to trace the origin of organic materials in various fields, such as geochemistry, biochemistry, archaeology and petroleum. In past a decade, it has also become an important tool for food traceability study. The globalization of food markets and the relative ease with which food commodities are transported through and between countries and continents, means that consumers are increasingly concerned about the origin of the foods they eat. The natural abundance isotope variation such as carbon, nitrogen, hydrogen and oxygen are use as geographic tracers or marker to determine the geographic origin of fruits, crop, vegetables and food products from animal. The isotopic compositions of plant materials reflect various factors such as isotopic compositions of source materials and their assimilation processes as well as growth environments. This paper will discuss on stable carbon and nitrogen isotopic compositions in rice, advantages, limitations and potential of other analysis applications that can be incorporated in food traceability system. (author)

  19. Stable platinum isotope measurements in presolar nanodiamonds by TEAMS

    Energy Technology Data Exchange (ETDEWEB)

    Wallner, A., E-mail: anton.wallner@univie.ac.at [University of Vienna, Faculty of Physics, VERA Laboratory, Waehringer Strasse 17, A-1090 Vienna (Austria); Department of Nuclear Physics, Research School of Physics and Engineering, Australian National University, Canberra (Australia); Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights (Australia); Melber, K. [University of Vienna, Faculty of Physics, VERA Laboratory, Waehringer Strasse 17, A-1090 Vienna (Austria); Merchel, S. [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), D-01314 Dresden (Germany); Ott, U. [Max-Planck-Institut fuer Chemie, Joh.-J.-Becherweg 27, D-55128 Mainz (Germany); Forstner, O.; Golser, R.; Kutschera, W.; Priller, A.; Steier, P. [University of Vienna, Faculty of Physics, VERA Laboratory, Waehringer Strasse 17, A-1090 Vienna (Austria)

    2013-01-15

    Nanodiamonds are stardust grains commonly found in primitive meteorites. They survived the formation of the solar system and kept their own individuality. Measurements of trace-element isotopic signatures in these grains will help understanding heavy element nucleosynthesis in massive stars and dust formation from their ejecta. We have continued previous attempts to search for stable Pt isotope anomalies in nanodiamonds via trace element accelerator mass spectrometry (TEAMS). The installation of a new injector beam line at the VERA facility allowed studying low traces of stable elements in different materials. Moreover, recent experiments showed that VERA provides the required measurement precision together with a low Pt machine background. Here, we observed for the first time an indication for enhancements of {sup 198}Pt/{sup 195}Pt isotope ratios in two diamond residues prepared by different chemical separation techniques from the Allende meteorite. Variations in other isotopic ratios were within analytical uncertainty, and no anomaly was identified in a third diamond fraction.

  20. Neutron inelastic scattering measurements on the stable isotopes of titanium

    Science.gov (United States)

    Olacel, A.; Belloni, F.; Borcea, C.; Boromiza, M.; Dessagne, P.; Henning, G.; Kerveno, M.; Negret, A.; Nyman, M.; Pirovano, E.; Plompen, A. J. M.

    2017-07-01

    The results of a neutron inelastic scattering experiment performed at the Geel Electron Linear Accelerator pulsed white neutron source of the European Commission Joint Research Centre are reported. The neutrons with energies up to 18 MeV interacted with a natTi sample and the γ rays resulting from inelastic scattering reactions on the stable isotopes were detected using the Gamma Array for Inelastic Neutron Scattering (GAINS) spectrometer. We were able to measure the γ -production cross sections for 21 transitions in the five stable Ti isotopes. From these, the level cross sections and the total inelastic cross sections were determined. Our experimental results are compared with theoretical calculations performed using the talys 1.8 code, evaluated nuclear data libraries, and also with previously reported results.

  1. On the stable Mg-Zn-Y quasicrystals

    Science.gov (United States)

    Luo, Z. P.; Sui, H. X.; Zhang, S. Q.

    1996-07-01

    By the conventional air-cooled casting method, bulk ingots with a large fraction of stable Mg-Zn-Y icosahedral quasicrystals, both simple and face-centered, were obtained. The quasicrystal structures were directly confirmed by high-resolution electron microscopy (HREM) observations. The electron diffraction patterns from the quasicrystals were studied by computer simulations. A coexisting crys-talline phase of the quasicrystals was identified as the Mg7Zn3 phase, which was proved to be the (1/1) approximant of the quasicrystals. The quasicrystals were stable during a continuous heating process. However, at high temperature, oxidation occurred, and thus, Y2O3 and MgO products were formed. Oxidation at high temperatures is characteristic for the Mg-Zn-Y alloys and differs from Al-base alloys.

  2. Stable Higgs Bosons - new candidate for cold dark matter

    International Nuclear Information System (INIS)

    Hosotani, Yutaka

    2010-01-01

    The Higgs boson is in the backbone of the standard model of electroweak interactions. It must exist in some form for achieving unification of interactions. In the gauge-Higgs unification scenario the Higgs boson becomes a part of the extra-dimensional component of gauge fields. The Higgs boson becomes absolutely stable in a class of the gauge-Higgs unification models, serving as a promising candidate for cold dark matter in the universe. The observed relic abundance of cold dark matter is obtained with the Higgs mass around 70 GeV. The Higgs-nucleon scattering cross section is found to be close to the recent CDMS II XENON10 bounds in the direct detection of dark matter. In collider experiments stable Higgs bosons are produced in a pair, appearing as missing energies momenta so that the way of detecting Higgs bosons must be altered.

  3. Fractionation of Stable Isotopes in Atmospheric Aerosol Reactions

    DEFF Research Database (Denmark)

    Meusinger, Carl

    reactions and undergo complex chemical and physical changes during their lifetimes. In order to assess processes that form and alter aerosols, information provided by stable isotopes can be used to help constrain estimates on the strength of aerosol sources and sinks. This thesis studies (mass......-independent) fractionation processes of stable isotopes of C, N, O and S in order to investigate three different systems related to aerosols: 1. Post-depositional processes of nitrate in snow that obscure nitrate ice core records 2. Formation and aging of secondary organic aerosol generated by ozonolysis of X...... as required. The kndings provide important results for the studies' respective felds, including a description of the isotopic fractionation and quantum yield of nitrate photolysis in snow, equilibrium fractionation in secondary organic aerosol and fractionation constants of different oxidation pathways of SO2....

  4. Selection of medical treatment in stable angina pectoris

    DEFF Research Database (Denmark)

    Ardissino, D; Savonitto, S; Egstrup, K

    1995-01-01

    pectoris. BACKGROUND: The characteristics of anginal symptoms and the results of exercise testing are considered of great importance for selecting medical treatment in patients with chronic stable angina pectoris. However, little information is available on how this first evaluation may be used to select......, the patients were randomly allocated to double-blind treatment for 6 weeks with either metoprolol (Controlled Release, 200 mg once daily) or nifedipine (Retard, 20 mg twice daily) according to a parallel group design. At the end of this period, exercise tests were repeated 1 to 4 h after drug intake. RESULTS....... CONCLUSIONS: The results of a baseline exercise test, but not the characteristics of anginal symptoms, may offer useful information for selecting medical treatment in stable angina pectoris....

  5. Oxidatively stable polyaniline:polyacid electrodes for electrochemical energy storage.

    Science.gov (United States)

    Jeon, Ju-Won; Ma, Yuguang; Mike, Jared F; Shao, Lin; Balbuena, Perla B; Lutkenhaus, Jodie L

    2013-06-28

    Conjugated polymers, such as polyaniline, have been widely explored as sensors, electrodes, and conductive fillers. As an electrode material in electrochemical energy storage systems, polyaniline can be subject to irreversible oxidation that reduces cycle life and electrode capacity, thus, limiting its widespread application. Here we present a simple route to produce and prepare polyaniline-based electrodes that are oxidatively stable up to 4.5 V vs. Li/Li(+). The route uses a polyacid to stabilize the fully oxidized pernigraniline salt form of polyaniline, which is normally highly unstable as a homopolymer. The result is an organic electrode of exceptionally high capacity, energy density, power density, and cycle life. We demonstrate that the polyaniline:polyacid electrode stores 230 mA h g(-1) of polyaniline for over 800 cycles, far surpassing homopolymer polyaniline under equivalent conditions. This approach provides a highly stable, electrochemically reversible replacement for conventional polyaniline.

  6. Stable platinum isotope measurements in presolar nanodiamonds by TEAMS

    International Nuclear Information System (INIS)

    Wallner, A.; Melber, K.; Merchel, S.; Ott, U.; Forstner, O.; Golser, R.; Kutschera, W.; Priller, A.; Steier, P.

    2013-01-01

    Nanodiamonds are stardust grains commonly found in primitive meteorites. They survived the formation of the solar system and kept their own individuality. Measurements of trace-element isotopic signatures in these grains will help understanding heavy element nucleosynthesis in massive stars and dust formation from their ejecta. We have continued previous attempts to search for stable Pt isotope anomalies in nanodiamonds via trace element accelerator mass spectrometry (TEAMS). The installation of a new injector beam line at the VERA facility allowed studying low traces of stable elements in different materials. Moreover, recent experiments showed that VERA provides the required measurement precision together with a low Pt machine background. Here, we observed for the first time an indication for enhancements of 198 Pt/ 195 Pt isotope ratios in two diamond residues prepared by different chemical separation techniques from the Allende meteorite. Variations in other isotopic ratios were within analytical uncertainty, and no anomaly was identified in a third diamond fraction.

  7. Development of O-18 stable isotope separation technology using membrane

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Woo; Kim, Taek Soo; Choi, Hwa Rim; Park, Sung Hee; Lee, Ki Tae; Chang, Dae Shik

    2006-06-15

    The ultimate goal of this investigation is to develop the separation technology for O-18 oxygen stable isotope used in a cyclotron as a target for production of radioisotope F-18. F-18 is a base material for synthesis of [F-18]FDG radio-pharmaceutical, which is one of the most important tumor diagnostic agent used in PET (Positron Emission Tomography). More specifically, this investigation is focused on three categories as follow, 1) development of the membrane distillation isotope separation process to re-enrich O-18 stable isotope whose isotopic concentration is reduced after used in a cyclotron, 2) development of organic impurity purification technology to remove acetone, methanol, ethanol, and acetonitrile contained in a used cyclotron O-18 enriched target water, and 3) development of a laser absorption spectroscopic system for analyzing oxygen isotopic concentration in water.

  8. High efficiency and stable white OLED using a single emitter

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jian [Arizona State Univ., Tempe, AZ (United States). School of Mechanical, Aerospace, Chemical and Materials Engineering

    2016-01-18

    The ultimate objective of this project was to demonstrate an efficient and stable white OLED using a single emitter on a planar glass substrate. The focus of the project is on the development of efficient and stable square planar phosphorescent emitters and evaluation of such class of materials in the device settings. Key challenges included improving the emission efficiency of molecular dopants and excimers, controlling emission color of emitters and their excimers, and improving optical and electrical stability of emissive dopants. At the end of this research program, the PI has made enough progress to demonstrate the potential of excimer-based white OLED as a cost-effective solution for WOLED panel in the solid state lighting applications.

  9. Properties of stable nonstoichiometric nanoceria produced by thermal plasma

    Science.gov (United States)

    Lan, Yuan-Pei; Sohn, Hong Yong; Mohassab, Yousef; Liu, Qingcai; Xu, Baoqiang

    2017-08-01

    Thermally stable blue nonstoichiometric nanoceria was produced by feeding nanoceria with an average size of 50 nm into a DC thermal plasma reactor. The effects of different plasma power levels and atmospheres were investigated. XRD results showed the ceria lattice parameter increased with plasma power. SEM and TEM results showed that the shape of nanoparticles changed after plasma treatment; the blue nonstoichiometric nanoceria had highly regular shapes such as triangular pyramids and polyhedral in contrast to the irregular shape of the raw nanoceria. Significant downshift was found in the Raman spectra of the plasma products, with a 7.9-cm-1 shift compared with raw nanoceria, which was explained by the reduction of Ce4+. X-ray photoelectron spectroscopy results showed that the Ce3+ fraction increased from 14% in the raw nanoceria to 38-39% for the product CeO2- x , indicating the high reduction state on the ceria surface. It was determined that this blue nonstoichiometric nanoceria was stable up to 400 °C in air, but the color changed to pale yellow after 4 h at 500 °C in air indicating oxidation to CeO2. Additionally, this novel stable nano-CeO2- x caused a red shift in the UV-visible absorption results; a 48-nm red shift occurred for the nonstoichiometric nanoceria produced at 15 kW compared with the raw nanoceria. The band gap was calculated to be 2.5 eV while it was 3.2 eV for the raw nanoceria, indicating that this novel stable blue nonstoichiometric nanoceria should be a promising material for optical application.

  10. Phosphorus K4 Crystal: A New Stable Allotrope

    OpenAIRE

    Jie Liu; Shunhong Zhang; Yaguang Guo; Qian Wang

    2016-01-01

    The intriguing properties of phosphorene motivate scientists to further explore the structures and properties of phosphorus materials. Here, we report a new allotrope named K 4 phosphorus composed of three-coordinated phosphorus atoms in non-layered structure which is not only dynamically and mechanically stable, but also possesses thermal stability comparable to that of the orthorhombic black phosphorus (A17). Due to its unique configuration, K 4 phosphorus exhibits exceptional properties: i...

  11. (jack bean) is stable but of low solubility

    Indian Academy of Sciences (India)

    The cDNA for pre-pro-Concanavalin A (pre-pro-ConA) was cloned into the cytoplasmic expression vector pKK233-2 to give rise to pCONEXP2 which was used to express the lectin precursor. Pre-pro-ConA is stable and is not transposed and ligated to form the mature protein. No signal peptide removal is observed.

  12. Long-term stable surface modification of DLC coatings

    Directory of Open Access Journals (Sweden)

    Gotzmann Gaby

    2017-09-01

    Full Text Available The use of coatings based on diamond like carbon (DLC for medical applications was established during the last years. Main advantages of these coatings are its high hardness, good wear and friction behavior and its biocompatibility. Using low-energy electron-beam treatment, we addressed the surface modification of DLC coatings. The aim was to generate new biofunctional surface characteristics that are long-term stable.

  13. Soluble and stable zethrenebis(dicarboximide) and its quinone

    KAUST Repository

    Sun, Zhe

    2010-10-15

    Soluble and stable zethrenebis(dicarboximide) (1) was synthesized by an in situ Stille cross coupling/transannular cyclization reaction. 1 showed largely improved photostability and solubility compared with the very unstable zethrene and it also exhibited far-red absorption and emission with high photoluminescence quantum yield. Bromination of 1 with NBS/DMF gave its quinone form 2 via an unusual pathway. © 2010 American Chemical Society.

  14. Stable isotope deltas: tiny, yet robust signatures in nature.

    Science.gov (United States)

    Brand, Willi A; Coplen, Tyler B

    2012-09-01

    Although most of them are relatively small, stable isotope deltas of naturally occurring substances are robust and enable workers in anthropology, atmospheric sciences, biology, chemistry, environmental sciences, food and drug authentication, forensic science, geochemistry, geology, oceanography, and paleoclimatology to study a variety of topics. Two fundamental processes explain the stable isotope deltas measured in most terrestrial systems: isotopic fractionation and isotope mixing. Isotopic fractionation is the result of equilibrium or kinetic physicochemical processes that fractionate isotopes because of small differences in physical or chemical properties of molecular species having different isotopes. It is shown that the mixing of radioactive and stable isotope end members can be modelled to provide information on many natural processes, including (14)C abundances in the modern atmosphere and the stable hydrogen and oxygen isotopic compositions of the oceans during glacial and interglacial times. The calculation of mixing fractions using isotope balance equations with isotope deltas can be substantially in error when substances with high concentrations of heavy isotopes (e.g. (13)C, (2)H, and (18)O ) are mixed. In such cases, calculations using mole fractions are preferred as they produce accurate mixing fractions. Isotope deltas are dimensionless quantities. In the International System of Units (SI), these quantities have the unit 1 and the usual list of prefixes is not applicable. To overcome traditional limitations with expressing orders of magnitude differences in isotope deltas, we propose the term urey (symbol Ur), after Harold C. Urey, for the unit 1. In such a manner, an isotope delta value expressed traditionally as-25 per mil can be written as-25 mUr (or-2.5 cUr or-0.25 dUr; the use of any SI prefix is possible). Likewise, very small isotopic differences often expressed in per meg 'units' are easily included (e.g. either+0.015 ‰ or+15 per meg

  15. Stable isotope deltas: Tiny, yet robust signatures in nature

    Science.gov (United States)

    Brand, Willi A.; Coplen, Tyler B.

    2012-01-01

    Although most of them are relatively small, stable isotope deltas of naturally occurring substances are robust and enable workers in anthropology, atmospheric sciences, biology, chemistry, environmental sciences, food and drug authentication, forensic science, geochemistry, geology, oceanography, and paleoclimatology to study a variety of topics. Two fundamental processes explain the stable isotope deltas measured in most terrestrial systems: isotopic fractionation and isotope mixing. Isotopic fractionation is the result of equilibrium or kinetic physicochemical processes that fractionate isotopes because of small differences in physical or chemical properties of molecular species having different isotopes. It is shown that the mixing of radioactive and stable isotope end members can be modelled to provide information on many natural processes, including 14C abundances in the modern atmosphere and the stable hydrogen and oxygen isotopic compositions of the oceans during glacial and interglacial times. The calculation of mixing fractions using isotope balance equations with isotope deltas can be substantially in error when substances with high concentrations of heavy isotopes (e.g. 13C, 2H, and 18O ) are mixed. In such cases, calculations using mole fractions are preferred as they produce accurate mixing fractions. Isotope deltas are dimensionless quantities. In the International System of Units (SI), these quantities have the unit 1 and the usual list of prefixes is not applicable. To overcome traditional limitations with expressing orders of magnitude differences in isotope deltas, we propose the term urey (symbol Ur), after Harold C. Urey, for the unit 1. In such a manner, an isotope delta value expressed traditionally as−25 per mil can be written as−25 mUr (or−2.5 cUr or−0.25 dUr; the use of any SI prefix is possible). Likewise, very small isotopic differences often expressed in per meg ‘units’ are easily included (e.g. either+0.015 ‰ or+15 per meg

  16. Stable isotope utilization for research on human nutrition

    International Nuclear Information System (INIS)

    Desjeux, J.F.

    1994-01-01

    In the framework of nutritional molecule metabolism research, this paper presents the various stable isotopes used as labels for biological molecules, the reasons for their application in human nutritional study (mainly because of their non toxicity) and the various analysis methods (isotope ratio mass spectrometry, coupled gaseous chromatography and mass spectrometry, nuclear magnetic resonance). Several application examples in nutrition research are then discussed: metabolic conversion measurement for a molecule into its different metabolites, energetic losses. 23 refs

  17. On the Hitting Probability of Max-Stable Processes

    OpenAIRE

    Hofmann, Martin

    2012-01-01

    The probability that a max-stable process {\\eta} in C[0, 1] with identical marginal distribution function F hits x \\in R with 0 < F (x) < 1 is the hitting probability of x. We show that the hitting probability is always positive, unless the components of {\\eta} are completely dependent. Moreover, we consider the event that the paths of standard MSP hit some x \\in R twice and we give a sufficient condition for a positive probability of this event.

  18. T-regulatory cells in chronic rejection versus stable grafts.

    Science.gov (United States)

    Al-Wedaie, Fatima; Farid, Eman; Tabbara, Khaled; El-Agroudy, Amgad E; Al-Ghareeb, Sumaya M

    2015-04-01

    Studying regulatory T cells in kidney allograft acceptance versus chronic rejection may help in the understanding of more mechanisms of immune tolerance and, in the future, may enable clinicians to induce immune tolerance and decrease the use of immunosuppressive drugs. The aim of the current study was to evaluate regulatory T cells in kidney transplant patients with stable graft versus transplant with biopsy-proven chronic rejection. The 3 groups that were studied included: kidney transplanted patients with no rejection episodes (n = 43); transplanted patients with biopsy-proven renal rejection (n = 27); and healthy age-matched nontransplanted individuals as controls (n = 42).The percentage of regulatory T cells (CD4+CD25+Foxp3+) in blood was determined by flow cytometry. The regulatory T cell percentage was significantly lower in chronic rejection patients than control or stable graft groups. No significant difference was observed in regulatory T cell percentage between the stable graft and control groups. In the stable graft group, patients on rapamycin had a significantly higher regulatory T cell percentage than patients on cyclosporine. No effect of donor type, infection, or duration after transplant was observed on regulatory T cell percentage. The results of the current study are consistent with previous studies addressing the function of regulatory T cells in inducing immunotolerance after kidney transplant. Considering the established role of regulatory T cells in graft maintenance and our observation of high regulatory T cell percentage in patients receiving rapamycin than cyclosporine, we recommend including rapamycin when possible in immunosuppressive protocols. The findings from the current study on the chronic rejection group support ongoing research of having treatment with regulatory T cells, which may constitute a novel, efficient antirejection therapy in the future.

  19. On the likelihood function of Gaussian max-stable processes

    KAUST Repository

    Genton, M. G.

    2011-05-24

    We derive a closed form expression for the likelihood function of a Gaussian max-stable process indexed by ℝd at p≤d+1 sites, d≥1. We demonstrate the gain in efficiency in the maximum composite likelihood estimators of the covariance matrix from p=2 to p=3 sites in ℝ2 by means of a Monte Carlo simulation study. © 2011 Biometrika Trust.

  20. On the classification of complex vector bundles of stable rank

    Indian Academy of Sciences (India)

    In the present paper, we study the classification of stable-rank bundles on some compact complex manifolds. First, we extend ... below the results obtained in this case (see Propositions 4.1–4.3 and Theorems 5.1–5.3 for .... In order to prove the converse inclusion, let (c1,...,cp+1) be a (p + 1)-tuple of coho- mology classes ...

  1. Development of Stable Solidification Method for Insoluble Ferrocyanides-13170

    Energy Technology Data Exchange (ETDEWEB)

    Ikarashi, Yuki; Masud, Rana Syed; Mimura, Hitoshi [Dept. of Quantum Science and Energy Engineering, Graduate School of Engineering, Tohoku University, Aramaki-Aza-Aoba6-6-01-2, Sendai, 980-8579 (Japan); Ishizaki, Eiji; Matsukura, Minoru [UNION SHOWA K.K. 17-20, Mita 2-chome, Minato-ku, Tokyo 108-0073 (Japan)

    2013-07-01

    The development of stable solidification method of insoluble ferrocyanides sludge is an important subject for the safety decontamination in Fukushima NPP-1. By using the excellent immobilizing properties of zeolites such as gas trapping ability and self-sintering properties, the stable solidification of insoluble ferrocyanides was accomplished. The immobilization ratio of Cs for K{sub 2}[CoFe(CN){sub 6}].nH{sub 2}O saturated with Cs{sup +} ions (Cs{sub 2}[CoFe(CN){sub 6}].nH{sub 2}O) was estimated to be less than 0.1% above 1,000 deg. C; the adsorbed Cs{sup +} ions are completely volatilized. In contrast, the novel stable solid form was produced by the press-sintering of the mixture of Cs{sub 2}[CoFe(CN){sub 6}].nH{sub 2}O and zeolites at higher temperature of 1,000 deg. C and 1,100 deg. C; Cs volatilization and cyanide release were completely depressed. The immobilization ratio of Cs, under the mixing conditions of Cs{sub 2}[CoFe(CN){sub 6}].nH{sub 2}O:CP= 1:1 and calcining temperature: 1,000 deg. C, was estimated to be nearly 100%. As for the kinds of zeolites, natural mordenite (NM), clinoptilolite (CP) and Chabazite tended to have higher immobilization ratio compared to zeolite A. This may be due to the difference in the phase transformation between natural zeolites and synthetic zeolite A. In the case of the composites (K{sub 2-X}Ni{sub X/2}[NiFe(CN){sub 6}].nH{sub 2}O loaded natural mordenite), relatively high immobilization ratio of Cs was also obtained. This method using zeolite matrices can be applied to the stable solidification of the solid wastes of insoluble ferrocyanides sludge. (authors)

  2. Stable-label intravenous glucose tolerance test minimal model

    International Nuclear Information System (INIS)

    Avogaro, A.; Bristow, J.D.; Bier, D.M.; Cobelli, C.; Toffolo, G.

    1989-01-01

    The minimal model approach to estimating insulin sensitivity (Sl) and glucose effectiveness in promoting its own disposition at basal insulin (SG) is a powerful tool that has been underutilized given its potential applications. In part, this has been due to its inability to separate insulin and glucose effects on peripheral uptake from their effects on hepatic glucose inflow. Prior enhancements, with radiotracer labeling of the dosage, permit this separation but are unsuitable for use in pregnancy and childhood. In this study, we labeled the intravenous glucose tolerance test (IVGTT) dosage with [6,6- 2 H 2 ]glucose, [2- 2 H]glucose, or both stable isotopically labeled glucose tracers and modeled glucose kinetics in six postabsorptive, nonobese adults. As previously found with the radiotracer model, the tracer-estimated S*l derived from the stable-label IVGTT was greater than Sl in each case except one, and the tracer-estimated SG* was less than SG in each instance. More importantly, however, the stable-label IVGTT estimated each parameter with an average precision of +/- 5% (range 3-9%) compared to average precisions of +/- 74% (range 7-309%) for SG and +/- 22% (range 3-72%) for Sl. In addition, because of the different metabolic fates of the two deuterated tracers, there were minor differences in basal insulin-derived measures of glucose effectiveness, but these differences were negligible for parameters describing insulin-stimulated processes. In conclusion, the stable-label IVGTT is a simple, highly precise means of assessing insulin sensitivity and glucose effectiveness at basal insulin that can be used to measure these parameters in individuals of all ages, including children and pregnant women

  3. Development of Laser Application Technology for Stable Isotope Production

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Do Young; Ko, Kwang Hoon; Kwon, Duck Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2007-04-15

    Tl-203 is used as a source material to produce Tl-201 radioisotope which is produced in a cyclotron by irradiating the enriched Tl-203 target. Tl-201 is a radiopharmaceutical for SPECT (single photon emission computerized tomography) to diagnose heart diseases and tumors. This Project aim to develop laser application technology to product stable isotopes such as Tl-203, Yb-168, and Yb-176. For this, photoion extraction device, atomic beam generator, dye lasers, and high power IR lasers are developed.

  4. On the classification of complex vector bundles of stable rank

    Indian Academy of Sciences (India)

    a classification of all rank r complex vector bundles on X, for stable rank r ≥ n/2. A few partial answers to this question are known. For instance, a classical result of. Wu asserts that any couple of cohomology classes (c1,c2) ∈ H2(X, Z) × H4(X, Z) coincides with c(E) for a vector bundle E, on a basis X of dimension less than ...

  5. Stable Leader Election in Population Protocols Requires Linear Time

    OpenAIRE

    Doty, David; Soloveichik, David

    2015-01-01

    A population protocol *stably elects a leader* if, for all $n$, starting from an initial configuration with $n$ agents each in an identical state, with probability 1 it reaches a configuration $\\mathbf{y}$ that is correct (exactly one agent is in a special leader state $\\ell$) and stable (every configuration reachable from $\\mathbf{y}$ also has a single agent in state $\\ell$). We show that any population protocol that stably elects a leader requires $\\Omega(n)$ expected "parallel time" --- $\\...

  6. Parameter estimation of sub-Gaussian stable distributions

    Czech Academy of Sciences Publication Activity Database

    Omelchenko, Vadym

    2014-01-01

    Roč. 50, č. 6 (2014), s. 929-949 ISSN 0023-5954 R&D Projects: GA ČR GA13-14445S Institutional support: RVO:67985556 Keywords : stable distribution * sub-Gaussian distribution * maximum likelihood Subject RIV: AH - Economics Impact factor: 0.541, year: 2014 http://library.utia.cas.cz/separaty/2014/E/omelchenko-0439707.pdf

  7. Searching for stable orbits in the HD 10180 planetary system

    Directory of Open Access Journals (Sweden)

    Laskar J.

    2011-02-01

    Full Text Available A planetary system with at least seven planets has been found around the star HD 10180. However, the traditional Keplerian and n-body fits to the data provide an orbital solution that becomes unstable very quickly, which may quest the reliability of the observations. Here we show that stable orbital configurations can be obtained if general relativity and long-term dissipation raised by tides on the innermost planet are taken into account.

  8. Highly Stable and Active Catalyst for Sabatier Reactions

    Science.gov (United States)

    Hu, Jianli; Brooks, Kriston P.

    2012-01-01

    Highly active Ru/TiO2 catalysts for Sabatier reaction have been developed. The catalysts have shown to be stable under repeated shutting down/startup conditions. When the Ru/TiO2 catalyst is coated on the engineered substrate Fe-CrAlY felt, activity enhancement is more than doubled when compared with an identically prepared engineered catalyst made from commercial Degussa catalyst. Also, bimetallic Ru-Rh/TiO2 catalysts show high activity at high throughput.

  9. On the habitability of universes without stable deuterium

    Science.gov (United States)

    Adams, Fred C.; Grohs, Evan

    2017-05-01

    In both stars and in the early universe, the production of deuterium is the first step on the way to producing heavier nuclei. If the strong force were slightly weaker, then deuterium would not be stable, and many authors have noted that nuclesynthesis would be compromised so that helium production could not proceed through standard reaction chains. Motivated by the possibility that other regions of space-time could have different values for the fundamental constants, this paper considers stellar evolution in universes without stable deuterium and argues that such universes can remain habitable. Even in universes with no stellar nucleosynthesis, stars can form and will generate energy through gravitational contraction. Using both analytic estimates and a state-of-the-art stellar evolution code, we show that such stars can be sufficiently luminous and long-lived to support life. Stars with initial masses that exceed the Chandrasekhar mass cannot be supported by degeneracy pressure and will explode at the end of their contraction phase. The resulting explosive nucleosynthesis can thus provide the universe with some heavy elements. We also explore the possibility that helium can be produced in stellar cores through a triple-nucleon reaction that is roughly analogous to the triple-alpha reaction that operates in our universe. Stars burning hydrogen through this process are somewhat hotter than those in our universe, but otherwise play the same role. Next we show that with even trace amounts (metallicity Z ∼10-10) of heavy elements - produced through the triple-nucleon process or by explosive nucleosynthesis - the CNO cycle can operate and allow stars to function. Finally, we consider Big Bang Nucleosynthesis without stable deuterium and find that only trace amounts of helium are produced, with even smaller abundances of other nuclei. With stars evolving through gravitational contraction, explosive nucleosynthesis, the triple-nucleon reaction, and the CNO cycle

  10. Highly scalable multichannel mesh electronics for stable chronic brain electrophysiology.

    Science.gov (United States)

    Fu, Tian-Ming; Hong, Guosong; Viveros, Robert D; Zhou, Tao; Lieber, Charles M

    2017-11-21

    Implantable electrical probes have led to advances in neuroscience, brain-machine interfaces, and treatment of neurological diseases, yet they remain limited in several key aspects. Ideally, an electrical probe should be capable of recording from large numbers of neurons across multiple local circuits and, importantly, allow stable tracking of the evolution of these neurons over the entire course of study. Silicon probes based on microfabrication can yield large-scale, high-density recording but face challenges of chronic gliosis and instability due to mechanical and structural mismatch with the brain. Ultraflexible mesh electronics, on the other hand, have demonstrated negligible chronic immune response and stable long-term brain monitoring at single-neuron level, although, to date, it has been limited to 16 channels. Here, we present a scalable scheme for highly multiplexed mesh electronics probes to bridge the gap between scalability and flexibility, where 32 to 128 channels per probe were implemented while the crucial brain-like structure and mechanics were maintained. Combining this mesh design with multisite injection, we demonstrate stable 128-channel local field potential and single-unit recordings from multiple brain regions in awake restrained mice over 4 mo. In addition, the newly integrated mesh is used to validate stable chronic recordings in freely behaving mice. This scalable scheme for mesh electronics together with demonstrated long-term stability represent important progress toward the realization of ideal implantable electrical probes allowing for mapping and tracking single-neuron level circuit changes associated with learning, aging, and neurodegenerative diseases. Copyright © 2017 the Author(s). Published by PNAS.

  11. Quasi-stable injection channels in a wakefield accelerator

    OpenAIRE

    Wiltshire-Turkay, Mara; Farmer, John P.; Pukhov, Alexander

    2016-01-01

    The influence of initial position on the acceleration of externally-injected electrons in a plasma wakefield is investigated. Test-particle simulations show previously unobserved complex structure in the parameter space, with quasi-stable injection channels forming for particles injected in narrow regions away from the wake centre. Particles injected into these channels remain in the wake for a considerable time after dephasing, and as a result achieve significantly higher energy than their n...

  12. The Healing Potential of Stable Juvenile Osteochondritis Dissecans Knee Lesions

    Science.gov (United States)

    Wall, Eric J.; Vourazeris, Jason; Myer, Gregory D.; Emery, Kathleen H.; Divine, Jon G.; Nick, Todd G.; Hewett, Timothy E.

    2008-01-01

    Background: The purpose of the present study was to determine if patient age, lesion size, lesion location, presenting knee symptoms, and sex predict the healing status after six months of a standard protocol of nonoperative treatment for stable juvenile osteochondritis dissecans of the knee. Methods: Forty-two skeletally immature patients (forty-seven knees) who presented with a stable osteochondritis dissecans lesion were included in the present study. All patients were managed with temporary immobilization followed by knee bracing and activity restriction. The primary outcome measure of progressive lesion reossification was determined from serial radiographs every six weeks, for up to six months of nonoperative treatment. A multivariable logistic regression model was used to determine potential predictors of healing status from the listed independent variables. Results: After six months of nonoperative treatment, sixteen (34%) of forty-seven stable lesions had failed to progress toward healing. The mean surface area (and standard deviation) of the lesions that showed progression toward healing (208.7 ± 135.4 mm2) was significantly smaller than that of the lesions that failed to show progression toward healing (288.0 ± 102.6 mm2) (p = 0.05). A logistic regression model that included patient age, normalized lesion size (relative to the femoral condyle), and presenting symptoms (giving-way, swelling, locking, or clicking) was predictive of healing status. Age was not a significant contributor to the predictive model (p = 0.25). Conclusions: In two-thirds of immature patients, six months of nonoperative treatment that includes activity modification and immobilization results in progressive healing of stable osteochondritis dissecans lesions. Lesions with an increased size and associated swelling and/or mechanical symptoms at presentation are less likely to heal. Level of Evidence: Prognostic Level II. See Instructions to Authors for a complete description of

  13. Equalization of Stable Union to Marriage at Property Succession

    OpenAIRE

    Lemos Junior, Eloy Pereira; Barbosa, Grasiele Dias

    2016-01-01

    In this paper will be analyzed the inheritance law of the spouse and partner in the light of the 2002 Civil Code and the 1988 Federal Constitution. First it covers an approach to the legislative history of the spouse's estate succession and partner. Then, analyze the characteristics of inheritance law of marriage and stable union. Furthermore, we analyze the innovations and guarantees brought by the Federal Constitution of 1988, which gave special protection to the family, regardless of their...

  14. NEBIVOLOL IN TREATMENT OF STABLE EXERTIONAL ANGINA PECTORIS

    Directory of Open Access Journals (Sweden)

    Y. V. Gavrilov

    2015-12-01

    Full Text Available Aim. To evaluate antianginal and antiischemic efficiency of nebivolol in patients with stable angina pectoris.Material and methods. 100 patients with ischemic heart disease showing stable exertional angina pectoris and having no contraindications to beta-blockers were studied. After 5-7 days of control period 50 randomly selected patients began to take nebivolol in initial dose of 5mg once daily and 50 patients started to take metoprolol in initial dose of 50 mg twice daily. Duration of treatment was 8 weeks. Efficiency of treatment was assessed according to the results of control treadmill assessment and control daily ECG monitoring.Results. 56-day therapy with nebivolol at a dose of 7,5 mg per day results in increase in duration of treadmill test before angina or ST depression (p<0.05. Antianginal and antiischemic effect of nebivolol 7.5 mg once daily is rather similar with that of metoprolol in average daily dose of 175 mg. Nebivolol compared to metoprolol significantly (p<0.05 more effectively reduces the number of silent myocardial ischemia.Conclusion. Nebivolol is an efficient antianginal and antiischemic drug for patients with stable exertional angina pectoris.

  15. Search for stable stau production at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Kaschube, Kolja

    2011-10-15

    In this thesis, a search for heavy stable charge particle production, in particular a quasistable supersymmetric tau lepton (''stau'') arising in gauge-mediated supersymmetry breaking (GMSB) models, is presented. This stable stau would cross detectors without decaying, resembling a muon, and produce signatures of high momentum or high ionization energy loss. The energy loss measurement represents a direct handle on the particle mass via the Bethe-Bloch formula. Proton-proton collisions at 7 TeV center-of-mass energy produced by the Large Hadron Collider and recorded by the CMS detector are investigated. Low-momentum collision data tracks are used to predict the background of highly ionizing tracks at high momenta. A high signal-to-background ratio is achieved by separating the search into channels with differing muon or stau multiplicities and by using the transverse momentum and energy loss measurement as the discriminating variables. Using 35.8 pb{sup -1} of data recorded in the 2010 LHC run, no excess is observed with respect to the expected Standard Model background. As a result, upper limits on the mass of stable status are derived within the context of the investigated GMSB models. (orig.)

  16. Membrane-Sculpting BAR Domains Generate Stable Lipid Microdomains

    Science.gov (United States)

    Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V.; Tkach, Vadym; Stamou, Dimitrios; Drubin, David G.; Lappalainen, Pekka

    2014-01-01

    SUMMARY Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR domains can generate extremely stable lipid microdomains by “freezing” phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved role for BAR superfamily proteins in regulating lipid dynamics within membranes. Stable microdomains induced by BAR domain scaffolds and specific lipids can generate phase boundaries and diffusion barriers, which may have profound impacts on diverse cellular processes. PMID:24055060

  17. Air-stable n-type colloidal quantum dot solids

    KAUST Repository

    Ning, Zhijun

    2014-06-08

    Colloidal quantum dots (CQDs) offer promise in flexible electronics, light sensing and energy conversion. These applications rely on rectifying junctions that require the creation of high-quality CQD solids that are controllably n-type (electron-rich) or p-type (hole-rich). Unfortunately, n-type semiconductors made using soft matter are notoriously prone to oxidation within minutes of air exposure. Here we report high-performance, air-stable n-type CQD solids. Using density functional theory we identify inorganic passivants that bind strongly to the CQD surface and repel oxidative attack. A materials processing strategy that wards off strong protic attack by polar solvents enabled the synthesis of an air-stable n-type PbS CQD solid. This material was used to build an air-processed inverted quantum junction device, which shows the highest current density from any CQD solar cell and a solar power conversion efficiency as high as 8%. We also feature the n-type CQD solid in the rapid, sensitive, and specific detection of atmospheric NO2. This work paves the way for new families of electronic devices that leverage air-stable quantum-tuned materials. © 2014 Macmillan Publishers Limited. All rights reserved.

  18. Turbulence Spreading into Linearly Stable Zone and Transport Scaling

    International Nuclear Information System (INIS)

    Hahm, T.S.; Diamond, P.H.; Lin, Z.; Itoh, K.; Itoh, S.-I.

    2003-01-01

    We study the simplest problem of turbulence spreading corresponding to the spatio-temporal propagation of a patch of turbulence from a region where it is locally excited to a region of weaker excitation, or even local damping. A single model equation for the local turbulence intensity I(x, t) includes the effects of local linear growth and damping, spatially local nonlinear coupling to dissipation and spatial scattering of turbulence energy induced by nonlinear coupling. In the absence of dissipation, the front propagation into the linearly stable zone occurs with the property of rapid progression at small t, followed by slower subdiffusive progression at late times. The turbulence radial spreading into the linearly stable zone reduces the turbulent intensity in the linearly unstable zone, and introduces an additional dependence on the rho* is always equal to rho i/a to the turbulent intensity and the transport scaling. These are in broad, semi-quantitative agreements with a number of global gyrokinetic simulation results with zonal flows and without zonal flows. The front propagation stops when the radial flux of fluctuation energy from the linearly unstable region is balanced by local dissipation in the linearly stable region

  19. Experimental study of a flexible and environmentally stable electroadhesive device

    Science.gov (United States)

    Guo, J.; Bamber, T.; Singh, J.; Manby, D.; Bingham, P. A.; Justham, L.; Petzing, J.; Penders, J.; Jackson, M.

    2017-12-01

    Electroadhesion is a promising adhesion mechanism for robotics and material handling applications due to several distinctive advantages it has over existing technologies. These advantages include enhanced adaptability, gentle/flexible handling, reduced complexity, and ultra-low energy consumption. Unstable electroadhesive forces, however, can arise in ambient environments. Electroadhesive devices that can produce stable forces in changing environments are thus desirable. In this study, a flexible and environmentally stable electroadhesive device was designed and manufactured by conformally coating a layer of barium titanate dielectric on a chemically etched thin copper laminate. The results, obtained from an advanced electroadhesive "normal force" testing platform, show that only a relative difference of 5.94% in the normal force direction was observed. This was achieved when the relative humidity changed from 25% to 53%, temperature from 13.7 °C to 32.8 °C, and atmospheric pressure from 999 hPa to 1016.9 hPa. This environmentally stable electroadhesive device may promote the application of the electroadhesion technology.

  20. Discrimination of ginseng cultivation regions using light stable isotope analysis.

    Science.gov (United States)

    Kim, Kiwook; Song, Joo-Hyun; Heo, Sang-Cheol; Lee, Jin-Hee; Jung, In-Woo; Min, Ji-Sook

    2015-10-01

    Korean ginseng is considered to be a precious health food in Asia. Today, thieves frequently compromise ginseng farms by pervasive theft. Thus, studies regarding the characteristics of ginseng according to growth region are required in order to deter ginseng thieves and prevent theft. In this study, 6 regions were selected on the basis of Korea regional criteria (si, gun, gu), and two ginseng-farms were randomly selected from each of the 6 regions. Then 4-6 samples of ginseng were acquired from each ginseng farm. The stable isotopic compositions of H, O, C, and N of the collected ginseng samples were analyzed. As a result, differences in the hydrogen isotope ratios could be used to distinguish regional differences, and differences in the nitrogen isotope ratios yielded characteristic information regarding the farms from which the samples were obtained. Thus, stable isotope values could be used to differentiate samples according to regional differences. Therefore, stable isotope analysis serves as a powerful tool to discriminate the regional origin of Korean ginseng samples from across Korea. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  1. NEBIVOLOL IN TREATMENT OF STABLE EXERTIONAL ANGINA PECTORIS

    Directory of Open Access Journals (Sweden)

    Y. V. Gavrilov

    2007-01-01

    Full Text Available Aim. To evaluate antianginal and antiischemic efficiency of nebivolol in patients with stable angina pectoris.Material and methods. 100 patients with ischemic heart disease showing stable exertional angina pectoris and having no contraindications to beta-blockers were studied. After 5-7 days of control period 50 randomly selected patients began to take nebivolol in initial dose of 5mg once daily and 50 patients started to take metoprolol in initial dose of 50 mg twice daily. Duration of treatment was 8 weeks. Efficiency of treatment was assessed according to the results of control treadmill assessment and control daily ECG monitoring.Results. 56-day therapy with nebivolol at a dose of 7,5 mg per day results in increase in duration of treadmill test before angina or ST depression (p<0.05. Antianginal and antiischemic effect of nebivolol 7.5 mg once daily is rather similar with that of metoprolol in average daily dose of 175 mg. Nebivolol compared to metoprolol significantly (p<0.05 more effectively reduces the number of silent myocardial ischemia.Conclusion. Nebivolol is an efficient antianginal and antiischemic drug for patients with stable exertional angina pectoris.

  2. Stable Superstring Relics and Ultrahigh Energy Cosmic Rays

    CERN Document Server

    Coriano, Claudio; Plumacher, Michael; Coriano, Claudio; Faraggi, Alon E.; Plumacher, Michael

    2001-01-01

    One of the most intriguing experimental results of recent years is the observation of Ultrahigh Energy Cosmic Rays (UHECRs) above the GZK cutoff. Plausible candidates for the UHECR primaries are the decay products of a meta--stable matter state with mass of order O(10^{12-15 GeV}), which simultaneously is a good cold dark matter candidate. We study possible meta-stable matter states that arise from Wilson line breaking of GUT symmetries in semi-realistic heterotic string models. In the models that we study the exotic matter states can be classified according to patterns of SO(10) symmetry breaking. We show that cryptons, which are states that carry fractional electric charge $\\pm1/2$, and are confined by a hidden gauge group cannot produce viable dark matter. This is due to the fact that, in addition to the lightest neutral bound state, cryptons give rise to meta-stable charged bound states. However, these states may still account for the UHECR events. We argue that the uniton, which is an exotic Standard Mod...

  3. A highly stable microchannel heat sink for convective boiling

    International Nuclear Information System (INIS)

    Lu, Chun Ting; Pan Chin

    2009-01-01

    To develop a highly stable two-phase microchannel heat sink, we experimented with convective boiling in diverging, parallel microchannels with different distributions of laser-etched artificial nucleation sites. Each microchannel had a mean hydraulic diameter of 120 µm. The two-phase flow visualization and the magnitudes of pressure drop and inlet temperature oscillations under boiling conditions demonstrated clearly the merits of using artificial nucleation sites to further stabilize the flow boiling in diverging, parallel microchannels. The stability map showed the plane of subcooling number versus phase change number. It illustrated that diverging, parallel microchannels with artificial nucleation cavities have a much wider stable region than parallel microchannels with uniform cross-sections or diverging, parallel microchannels without artificial nucleation cavities. In addition, the results revealed that the design with cavities distributed uniformly along the downstream half of the channel presented the best stability performance among the three distributions of nucleation sites. This particular design can be regarded as a highly stable microchannel heat sink for convective boiling

  4. Search for stable stau production at the LHC

    International Nuclear Information System (INIS)

    Kaschube, Kolja

    2011-10-01

    In this thesis, a search for heavy stable charge particle production, in particular a quasistable supersymmetric tau lepton (''stau'') arising in gauge-mediated supersymmetry breaking (GMSB) models, is presented. This stable stau would cross detectors without decaying, resembling a muon, and produce signatures of high momentum or high ionization energy loss. The energy loss measurement represents a direct handle on the particle mass via the Bethe-Bloch formula. Proton-proton collisions at 7 TeV center-of-mass energy produced by the Large Hadron Collider and recorded by the CMS detector are investigated. Low-momentum collision data tracks are used to predict the background of highly ionizing tracks at high momenta. A high signal-to-background ratio is achieved by separating the search into channels with differing muon or stau multiplicities and by using the transverse momentum and energy loss measurement as the discriminating variables. Using 35.8 pb -1 of data recorded in the 2010 LHC run, no excess is observed with respect to the expected Standard Model background. As a result, upper limits on the mass of stable status are derived within the context of the investigated GMSB models. (orig.)

  5. Application of Stable Isotope Signatures in Food Traceability

    International Nuclear Information System (INIS)

    Nazaratul Ashifa Abdullah Salim; Roslanzairi Mostapha; Zainon Othman

    2016-01-01

    Stable isotope analysis has widely been used to trace the origin of organic materials in various fields, such as geochemistry, biochemistry, archaeology and petroleum. In past a decade, it has also become an important tool for food traceability study. The globalisation of food markets and the relative ease which food commodities are transported through and between countries and continents means that consumers are increasingly concerned about the origin of the foods they eat. The natural abundance of stable isotope variation such as carbon, nitrogen, hydrogen and oxygen are used as geographic tracers or marker to determine the geographic origin of fruits, crop, vegetables and food products from animal. The isotopic compositions of plant materials reflect various factors such as isotopic compositions of source materials and their assimilation processes as well as growth environments. This paper will discuss on stable carbon and nitrogen isotopic compositions in rice that been determined by Isotope Ratio Mass Spectrometry, advantages, limitations and potential of other analysis applications that can be incorporated in food traceability system. (author)

  6. The inflammasome pathway in stable COPD and acute exacerbations

    Directory of Open Access Journals (Sweden)

    Rosa Faner

    2016-07-01

    Full Text Available Chronic obstructive pulmonary disease (COPD is characterised by pulmonary and systemic inflammation that bursts during exacerbations of the disease (ECOPD. The NLRP3 inflammasome is a key regulatory molecule of the inflammatory response. Its role in COPD is unclear. We investigated the NLRP3 inflammasome status in: 1 lung tissue samples from 38 patients with stable COPD, 15 smokers with normal spirometry and 14 never-smokers; and 2 sputum and plasma samples from 56 ECOPD patients, of whom 41 could be reassessed at clinical recovery. We observed that: 1 in lung tissue samples of stable COPD patients, NLRP3 and interleukin (IL-1β mRNA were upregulated, but both caspase-1 and ASC were mostly in inactive form, and 2 during infectious ECOPD, caspase-1, oligomeric ASC and associated cytokines (IL-1β, IL-18 were significantly increased in sputum compared with clinical recovery. The NLRP3 inflammasome is primed, but not activated, in the lungs of clinically stable COPD patients. Inflammasome activation occurs during infectious ECOPD. The results of this study suggest that the inflammasome participates in the inflammatory burst of infectious ECOPD.

  7. On the joint statistics of stable random processes

    International Nuclear Information System (INIS)

    Hopcraft, K I; Jakeman, E

    2011-01-01

    A utilitarian continuous bi-variate random process whose first-order probability density function is a stable random variable is constructed. Results paralleling some of those familiar from the theory of Gaussian noise are derived. In addition to the joint-probability density for the process, these include fractional moments and structure functions. Although the correlation functions for stable processes other than Gaussian do not exist, we show that there is coherence between values adopted by the process at different times, which identifies a characteristic evolution with time. The distribution of the derivative of the process, and the joint-density function of the value of the process and its derivative measured at the same time are evaluated. These enable properties to be calculated analytically such as level crossing statistics and those related to the random telegraph wave. When the stable process is fractal, the proportion of time it spends at zero is finite and some properties of this quantity are evaluated, an optical interpretation for which is provided. (paper)

  8. Underestimation of hepatic glucose production by radioactive and stable tracers

    International Nuclear Information System (INIS)

    Argoud, G.M.; Schade, D.S.; Eaton, R.P.

    1987-01-01

    Although negative hepatic glucose production rates are physiologically impossible, they have been observed when hepatic glucose production is measured with the tracer-dilution technique during the hyperinsulinemic, euglycemic glucose clamp. Because hepatic glucose production is determined from the difference between tracer-derived glucose disposal and the known exogenous glucose infusion rate, the negative values for hepatic glucose production must result from an underestimation of glucose disposal by the tracer technique. In the current investigation, tracer-derived glucose disposal was measured in 25 subjects undergoing hyperinsulinemic, euglycemic clamps. Glucose disposal was measured with both radioactive and stable isotopes that utilize different methodologies, to determine whether discriminant metabolism of the isotopes versus methodological error leads to underestimation of tracer-derived glucose disposal. Both the radioactive and stable methodologies underestimated the exogenous glucose infusion rate during the hyperinsulinemic euglycemic clamp by 27 and 17%, respectively. Mean hepatic glucose production was -2.1 +/- 0.2 and -1.3 +/- 0.2 mg X kg-1 X min-1 as determined by the radioactive and stable isotope methodologies, respectively. Methodological error was an unlikely cause of this underestimation because it occurred with two different methodologies. The most likely explanation for underestimated rates of glucose disposal determined by the two types of isotope methodologies is discrepant metabolism of glucose tracers in comparison with unlabeled glucose

  9. Adaptive Sniping for Volatile and Stable Continuous Double Auction Markets

    Science.gov (United States)

    Toft, I. E.; Bagnall, A. J.

    This paper introduces a new adaptive sniping agent for the Continuous Double Auction. We begin by analysing the performance of the well known Kaplan sniper in two extremes of market conditions. We generate volatile and stable market conditions using the well known Zero Intelligence-Constrained agent and a new zero-intelligence agent Small Increment (SI). ZI-C agents submit random but profitable bids/offers and cause high volatility in prices and individual trader performance. Our new zero-intelligence agent, SI, makes small random adjustments to the outstanding bid/offer and hence is more cautious than ZI-C. We present results for SI in self-play and then analyse Kaplan in volatile and stable markets. We demonstrate that the non-adaptive Kaplan sniper can be configured to suit either market conditions, but no single configuration is performs well across both market types. We believe that in a dynamic auction environment where current or future market conditions cannot be predicted a viable sniping strategy should adapt its behaviour to suit prevailing market conditions. To this end, we propose the Adaptive Sniper (AS) agent for the CDA. AS traders classify sniping opportunities using a statistical model of market activity and adjust their classification thresholds using a Widrow-Hoff adapted search. Our AS agent requires little configuration, and outperforms the original Kaplan sniper in volatile and stable markets, and in a mixed trader type scenario that includes adaptive strategies from the literature.

  10. Driving-Related Neuropsychological Performance in Stable COPD Patients

    Directory of Open Access Journals (Sweden)

    Foteini Karakontaki

    2013-01-01

    Full Text Available Background. Cognitive deterioration may impair COPD patient’s ability to perform tasks like driving vehicles. We investigated: (a whether subclinical neuropsychological deficits occur in stable COPD patients with mild hypoxemia (PaO2 > 55 mmHg, and (b whether these deficits affect their driving performance. Methods. We recruited 35 stable COPD patients and 10 normal subjects matched for age, IQ, and level of education. All subjects underwent an attention/alertness battery of tests for assessing driving performance based on the Vienna Test System. Pulmonary function tests, arterial blood gases, and dyspnea severity were also recorded. Results. COPD patients performed significantly worse than normal subjects on tests suitable for evaluating driving ability. Therefore, many (22/35 COPD patients were classified as having inadequate driving ability (failure at least in one of the tests, whereas most (8/10 healthy individuals were classified as safe drivers (P=0.029. PaO2 and FEV1 were correlated with almost all neuropsychological tests. Conclusions. COPD patients should be warned of the potential danger and risk they face when they drive any kind of vehicle, even when they do not exhibit overt symptoms related to driving inability. This is due to the fact that stable COPD patients may manifest impaired information processing operations.

  11. Membrane-Sculpting BAR Domains Generate Stable Lipid Microdomains

    Directory of Open Access Journals (Sweden)

    Hongxia Zhao

    2013-09-01

    Full Text Available Bin-Amphiphysin-Rvs (BAR domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR domains can generate extremely stable lipid microdomains by “freezing” phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved role for BAR superfamily proteins in regulating lipid dynamics within membranes. Stable microdomains induced by BAR domain scaffolds and specific lipids can generate phase boundaries and diffusion barriers, which may have profound impacts on diverse cellular processes.

  12. The stable nonequilibrium state of bicarbonate aqueous systems

    Science.gov (United States)

    Voeikov, V. L.; Vilenskaya, N. D.; Ha, Do Minh; Malyshenko, S. I.; Buravleva, E. V.; Yablonskaya, O. I.; Timofeev, K. N.

    2012-09-01

    Data obtained by electron paramagnetic resonance (EPR) and chemiluminescence analysis indicate that in aqueous solutions of bicarbonates, superoxide radical and other reactive oxygen species (ROS) are constantly produced. The stationary level of the superoxide radical is found to increase when a solution is illuminated. Reactions involving ROS are shown to be accompanied by the generation of electron excitation energy, keeping bicarbonate solutions in a stable nonequilibrium state. The system can emit part of this energy. Variations in emitting activity are found to correlate with variations in the cosmophysical factors. The emitting activity of solutions is found to vary in the presence of low and ultralow concentrations of hydrated fullerenes. It is noted that the phenomenon of spontaneous charge separation in aqueous systems (G. H. Pollack) could play a role in maintaining a stable nonequilibrium state in bicarbonate systems where the reactions with ROS participation are catalyzed by forms of carbonate. It is concluded that the abovementioned properties of bicarbonate aqueous systems most likely keep living matter whose structural basis is formed by these systems in a stable excited state, thereby making it highly sensitive to the action of external factors with low and ultralow intensities.

  13. The iron stable isotope fingerprint of the human diet.

    Science.gov (United States)

    von Blanckenburg, Friedhelm; Noordmann, Janine; Guelke-Stelling, Monika

    2013-12-11

    The stable isotopes of iron disclose the metabolic pathways of iron within the human food chain. We have measured with precise multicollector ICP-MS the iron concentrations and stable isotope composition of 60 food products that are representative of the average German diet. We find that vegetables fall within the range typical of strategy I plants (-0.1 to -1.4‰ in δ(56)Fe), crop products and processed crop foods into the range typical of strategy II plants (-0.6 to +0.4‰), and animal products into the (54)Fe-enriched range known for animal tissue and blood (-1.1 to -2.7‰). Weighting these isotope compositions by the average iron dietary sources, we find a representative composition of European vegetarian diet of -0.45‰, whereas that of omnivores is -0.82‰. For human blood, known to be enriched in light iron isotopes, we find fractionation factors for iron absorption of -2.0 and -2.3‰ for vegetarians (female and male, respectively) and -1.3 and -1.5‰ for omnivores (female and male, respectively). Knowing these fractionation factors is a prerequisite for using stable iron isotope ratios in blood as monitors of intestinal iron uptake regulation.

  14. From stable to unstable anomaly-induced inflation

    Energy Technology Data Exchange (ETDEWEB)

    Paula Netto, Tiberio de [Universidade Federal de Juiz de Fora, Departamento de Fisica, ICE, Juiz de Fora, MG (Brazil); Pelinson, Ana M. [Universidade Federal de Santa Catarina, Departamento de Fisica, CFM, Bairro da Trindade, Florianopolis, SC (Brazil); Shapiro, Ilya L. [Universidade Federal de Juiz de Fora, Departamento de Fisica, ICE, Juiz de Fora, MG (Brazil); Tomsk State Pedagogical University and Tomsk State University, Tomsk (Russian Federation); Starobinsky, Alexei A. [L.D. Landau Institute for Theoretical Physics RAS, Moscow (Russian Federation); Utrecht University, Department of Physics and Astronomy, Institute for Theoretical Physics, Utrecht (Netherlands)

    2016-10-15

    Quantum effects derived through conformal anomaly lead to an inflationary model that can be either stable or unstable. The unstable version requires a large dimensionless coefficient of about 5 x 10{sup 8} in front of the R{sup 2} term that results in the inflationary regime in the R+R{sup 2} (''Starobinsky'') model being a generic intermediate attractor. In this case the non-local terms in the effective action are practically irrelevant, and there is a 'graceful exit' to a low curvature matter-like dominated stage driven by high-frequency oscillations of R - scalarons, which later decay to pairs of all particles and antiparticles, with the amount of primordial scalar (density) perturbations required by observations. The stable version is a genuine generic attractor, so there is no exit from it. We discuss a possible transition from stable to unstable phases of inflation. It is shown that this transition is automatic if the sharp cut-off approximation is assumed for quantum corrections in the period of transition. Furthermore, we describe two different quantum mechanisms that may provide a required large R{sup 2}-term in the transition period. (orig.)

  15. The separation of stable water-in-oil emulsions

    International Nuclear Information System (INIS)

    Velicogna, D.; Koundakjiian, A.; Beausejour, I.

    1993-01-01

    Stable oil-in-water emulsions are a major problem in the recovery of spilled oils. Such emulsions can contain as little as 10% oil and can have properties very different from the original oils, making their storage and disposal difficult. These problems have led to experiments testing the feasibility of a process for separating these stable emulsions into dischargeable water and reusable oil. The technique investigated involves use of a recyclable solvent to remove the oil and subsequent distillation and/or membrane treatment to recover the oil and recycle the solvent. Results of preliminary tests show that stable water-in-oil emulsions can be separated quite readily with a regenerated solvent system. The only products of these systems are oil, which can be sent to a refinery, and dischargeable water. The recycled solvent can be used many times without any significant decrease in separation efficiency. In order to enhance the throughput of the system, a solvent vapor stripping method was invented. This stripping method also improves the quality of the products and the recycled solvent. Membrane methods can be used as a post-treatment for the produced water in order to achieve more adequate compliance with discharge limits. 4 refs., 3 figs., 5 tabs

  16. Studies of Stable Octupole Deformations in the Radium Region

    CERN Multimedia

    2002-01-01

    The purpose of the present project is to locate and identify states in the atomic nuclei possessing stable pearshaped octupole deformation. Such states, formally related to the structures known in molecular physics, manifest themselves as families of parity doublets in odd nuclei.\\\\ \\\\ The best possibilities for observing stable octupole deformations are offered in the Ra-region. Both theoretical calculations and experimental indications support such expectations. Such indications are the non-observation of two-phonon octupole vibrational states in the ISOLDE studies of the even-even radium nuclei, and the reversed sign of the decoupling factor of the ground state band in |2|2|5Ra observed in the single-neutron transfer reactions. In order to establish the predicted strong E1 and E3-transitions between the parity doublets in odd nuclei with stable octupole deformations it is proposed to study conversion electrons in odd-mass francium radium and radon isotopes following the @b-decay of francium and astatine. \\...

  17. The status of applying stable isotope in the studies of environmental science

    International Nuclear Information System (INIS)

    Bai Zhipeng; Zhang Liwen; Zhu Tan; Feng Yinchang

    2007-01-01

    The stable isotope composition is characteristic in the pollution source, and it is relatively fixed in the process of transferring and reaction. At present the precise analysis result of stable isotope ratio can be obtained easily. So the stable isotopes can be applied to the pollution affair arbitration and source study. The concept and analytical method of stable isotopes are introduced. The research status of the stable isotopes in the field of environmental science and the isotope fractionation is reviewed. (authors)

  18. Structure of stable degeneration of K3 surfaces into pairs of rational elliptic surfaces

    OpenAIRE

    Kimura, Yusuke

    2018-01-01

    F-theory/heterotic duality is formulated in the stable degeneration limit of a K3 fibration on the F-theory side. In this note, we analyze the structure of the stable degeneration limit. We discuss whether stable degeneration exists for pairs of rational elliptic surfaces. We demonstrate that, when two rational elliptic surfaces have an identical complex structure, stable degeneration always exists. We provide an equation that systematically describes the stable degeneration of a K3 surface i...

  19. Lipid Extraction and the Fugacity of Stable Isotope Values

    Science.gov (United States)

    Padula, V.; Causey, D.; Wolf, N.; Welker, J. M.

    2013-12-01

    Stable isotope analysis of blood, feathers, and other tissues are often used to infer migration patterns, diet composition and trophic status of seabirds. Tissues contain variable amounts of lipids that are depleted in the heavy carbon isotope (13C) and may introduce a bias in these values. There is evidence that lipid extraction may affect other stable isotope ratios, such as δ15N. Consequently, correction factors need to be applied to appropriately interpret δ13C and δ15N values for individual species and tissue type. In this study, we collected seven species of seabirds from the Near Islands, the western most group of islands in the Aleutian Island archipelago. We sampled kidney, liver, heart and muscle samples from each bird and after freeze drying, individual tissue samples were divided into two subsamples. We left one subsample unaltered and extracted lipids from the other subsample using a 2:1 chloroform-methanol solution. We found that the change in δ13C values after lipid extraction (Δδ13C) varied widely among categories (eg., species, tissue type) from 0 - 4 ‰, while Δδ15N values ranged from 0 to 2‰. Notably, within category variation was nonsignificant and the Δδ values were linear against the covariant C:N ratio of the isotopic data, which allows us to use arithmetic corrections for categorical values. Our data strongly indicate that the effects of lipid extraction on stable isotopic values, while linear within category, vary widely by species, tissue, geographic area, year of collection, and isotope. Fugacity is usually employed as a thermodynamic quantity related to the chemical potential or activity that characterizes the escaping tendency from a phase (eg. Mackay & Paterson 1982). Here we use fugacity in the earlier, broader sense of fleeting, transitory, or instable states (eg., S. Johnson 1751), and its measure may be approximated by the higher order variance of Δδ13C and Δδ15N among data categories. Clearly, understanding the

  20. Leg-adjustment strategies for stable running in three dimensions

    International Nuclear Information System (INIS)

    Peuker, Frank; Maufroy, Christophe; Seyfarth, André

    2012-01-01

    The dynamics of the center of mass (CoM) in the sagittal plane in humans and animals during running is well described by the spring-loaded inverted pendulum (SLIP). With appropriate parameters, SLIP running patterns are stable, and these models can recover from perturbations without the need for corrective strategies, such as the application of additional forces. Rather, it is sufficient to adjust the leg to a fixed angle relative to the ground. In this work, we consider the extension of the SLIP to three dimensions (3D SLIP) and investigate feed-forward strategies for leg adjustment during the flight phase. As in the SLIP model, the leg is placed at a fixed angle. We extend the scope of possible reference axes from only fixed horizontal and vertical axes to include the CoM velocity vector as a movement-related reference, resulting in six leg-adjustment strategies. Only leg-adjustment strategies that include the CoM velocity vector produced stable running and large parameter domains of stability. The ability of the model to recover from perturbations along the direction of motion (directional stability) depended on the strategy for lateral leg adjustment. Specifically, asymptotic and neutral directional stability was observed for strategies based on the global reference axis and the velocity vector, respectively. Additional features of velocity-based leg adjustment are running at arbitrary low speed (kinetic energy) and the emergence of large domains of stable 3D running that are smoothly transferred to 2D SLIP stability and even to 1D SLIP hopping. One of the additional leg-adjustment strategies represented a large convex region of parameters where stable and robust hopping and running patterns exist. Therefore, this strategy is a promising candidate for implementation into engineering applications, such as robots, for instance. In a preliminary comparison, the model predictions were in good agreement with the experimental data, suggesting that the 3D SLIP is an