WorldWideScience

Sample records for stabilized bismuth oxide

  1. Oxygen surface exchange kinetics of erbia-stabilized bismuth oxide

    NARCIS (Netherlands)

    Yoo, C.-Y.; Boukamp, Bernard A.; Bouwmeester, Henricus J.M.

    2011-01-01

    The surface oxygen exchange kinetics of bismuth oxide stabilized with 25 mol% erbia (BE25) has been studied in the temperature and pO2 ranges 773–1,023 K and 0.1– 0.95 atm, respectively, using pulse-response 18O–16O isotope exchange measurements. The results indicate that BE25 exhibits a

  2. Effect of Bismuth Oxide on the Microstructure and Electrical Conductivity of Yttria Stabilized Zirconia

    Directory of Open Access Journals (Sweden)

    Liwei Liu

    2016-03-01

    Full Text Available Bismuth oxide (Bi2O3-doped yttria-stabilized zirconia (YSZ were prepared via the solid state reaction method. X-ray diffraction and electron diffraction spectroscopy results indicate that doping with 2 mol% Bi2O3 and adding 10 mol% yttria result in a stable zirconia cubic phase. Adding Bi2O3 as a dopant increases the density of zirconia to above 96%, while reducing its normal sintering temperature by approximately 250 °C. Moreover, electrical impedance analyses show that adding Bi2O3 enhances the conductivity of zirconia, improving its capability as a solid electrolyte for intermediate or even lower temperatures.

  3. Hydrothermal synthesis of bismuth germanium oxide

    Science.gov (United States)

    Boyle, Timothy J.

    2016-12-13

    A method for the hydrothermal synthesis of bismuth germanium oxide comprises dissolving a bismuth precursor (e.g., bismuth nitrate pentahydrate) and a germanium precursor (e.g., germanium dioxide) in water and heating the aqueous solution to an elevated reaction temperature for a length of time sufficient to produce the eulytite phase of bismuth germanium oxide (E-BGO) with high yield. The E-BGO produced can be used as a scintillator material. For example, the air stability and radioluminescence response suggest that the E-BGO can be employed for medical applications.

  4. Assessment of color stability of white mineral trioxide aggregate angelus and bismuth oxide in contact with tooth structure.

    Science.gov (United States)

    Marciano, Marina Angélica; Costa, Reginaldo Mendonça; Camilleri, Josette; Mondelli, Rafael Francisco Lia; Guimarães, Bruno Martini; Duarte, Marco Antonio Hungaro

    2014-08-01

    Dental discoloration with use of materials containing bismuth oxide has been reported. It is postulated that the discoloration is a result of chemical interaction of bismuth oxide with dentin. The aim of the study was to analyze dental color alteration and the chemical interaction of bismuth oxide with the main components present in composite (methacrylate) and in dentin (collagen). Fifty bovine teeth were prepared and filled with white mineral trioxide aggregate (MTA) Angelus, Portland cement (PC) with 20% zirconium oxide, or PC with 20% calcium tungstate and then sealed with composite. Triple antibiotic paste and unfilled samples were the positive and negative controls, respectively. The specimens were stored in separate flasks immersed in tap water at 37°C with ambient light blocked out. The color assessment was performed with a spectrophotometer at different intervals, namely before filling and 24 hours, 15 days, and 30 days after filling. The color change and the luminosity were calculated. The statistical analysis was performed by using nonparametric Kruskal-Wallis and Dunn tests (P bismuth oxide, zirconium oxide, and calcium tungstate with collagen and methacrylate was assessed by placing the materials in contact, followed by color assessment. The analysis of color change values showed that all the materials presented color alteration after the evaluated periods. Statistically higher luminosity was verified for PC/20% zirconium oxide in comparison with white MTA Angelus (P Bismuth oxide exhibited a color change when in contact with collagen. The color of white MTA Angelus was altered in contact with dental structures. Collagen, which is present in dentin matrix, reacted with bismuth oxide, resulting in a grayish discoloration. The use of an alternative radiopacifier to replace bismuth in white MTA is indicated. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  5. Investigation of phase stability and oxide ion performance in new perovskite-type bismuth vanadate

    International Nuclear Information System (INIS)

    Al-Alas, Ahlam; Beg, Saba; Al-Areqi, Niyazi A.S.

    2012-01-01

    Samples of the BICDVOX system, formulated as Bi 4 Cd x V 2−x O 11−(3x/2)−δ in the Cd substitution range 0 ≤ x ≤ 0.25 were synthesized using the standard solid state reaction.The correlation between phase stability and oxide ion performance were investigated by variable temperature XRPD, DSC and AC impedance spectroscopy. The substitution of V 5+ by Cd 2+ exhibited different phase transitions upon varying composition. For compositions with x ≤ 0.05, two successive transitions; α↔β↔γ are evident, while the β↔γ transition exists in the composition range 0.05 4+ → V 5+ re–oxidation results in increased defect trapping effects in the system at higher temperatures. -- Highlights: ► γ-Stabilized BICDVOX at lower dopant concentrations. ► Good oxide-ion conductivity at lower temperatures. ► High temperature-vanadium reduction with lower dopant concentrations.

  6. Genotoxic effects of bismuth (III oxide nanoparticles by comet assay

    Directory of Open Access Journals (Sweden)

    Reecep Liman

    2015-06-01

    Full Text Available Bismuth oxide is one of the important transition metal oxides and it has been intensively studied due to their peculiar characteristics (semiconductor band gap, high refractive index, high dielectric permittivity, high oxygen conductivity, resistivity, photoconductivity and photoluminescence etc.. Therefore, it is used such as microelectronics, sensor technology, optical coatings, transparent ceramic glass manufacturing, nanoenergetic gas generator, biosensor for DNA hybridization, potential immobilizing platforms for glucose oxidase and polyphenol oxidase, fuel cells, a additive in paints, an astringent in a variety of medical creams and topical ointments, and for the determination of heavy metal ions in drinking water, mineral water and urine. In addition this, Bismuth (III oxide nanoparticles (BONPs are favorable for the biomolecules adsorption than regular sized particles because of their greater advantages and novel characteristics (much higher specific surface, greater surface free energy, and good electrochemical stability etc.. Genotoxic effects of BONPs were investigated on the root cells of Allium cepa by Comet assay. A. cepa roots were treated with the aqueous dispersions of BONPs at 5 different concentrations (12.5, 25, 50, 75, and 100 ppm for 4 h. A significant increase in DNA damage was also observed at all concentrations of BONPs except 12.5 ppm by Comet assay. The results were also analyzed statistically by using SPSS for Windows; Duncan’s multiple range test was performed. These result indicate that BONPs exhibit genotoxic activity in A. cepa root meristematic cells.

  7. A study on structural stability of bismuth titanate with lanthanum ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 3. A study on structural stability of bismuth titanate with lanthanum ... In addition, the enlarged region of Bi 4f, Bi 4d, Ti 2p, La 3d and O 1s of doping sample was clearly seen after deconvolution. Based on binding energy position, it can be unambiguously stated ...

  8. Porous structure of oxide bismuth-molybdenum catalysts applied to silica gel

    International Nuclear Information System (INIS)

    Mikhajlenko, E.L.; Tarasova, D.V.; Razumova, N.V.

    1982-01-01

    A study was made on the formation of porous structure of oxide bismuth-molybdenum catalysts applied to silica gel. It has been shown that the structure and phase composition of the catalysts are determined by an initial state of a carrier. When a stabilized zol is used as a carrier its purification during the synthesis takes place as a result of the sodium ion interaction with molybdenum and bismuth ions with the formation of NaBi(MoO 4 ) 2 phase. The change in the catalyst structure during heat treatment is specified by the carrier caking in the presence of the Bi 2 (MoO 4 ) 3 fusible phase

  9. Study of bismuth molybdenum oxidic catalysts for methanol oxidation to formaldehyde

    International Nuclear Information System (INIS)

    Khokhler, R.Ya.; Kurina, L.N.; Kudrina, N.V.

    1982-01-01

    Phase composition and catalytic properties of bismuth molybdenum oxidic system in reaction of methanol oxidation are studied at temperature of 280-350 deg. Increase of selectivity according to formaldehyde is connected with formation of MoO 3 solid solution in bismuth molybdate Bi 2 O 3 x3MoO 3

  10. Formic acid oxidation at platinum-bismuth catalysts

    Directory of Open Access Journals (Sweden)

    Popović Ksenija Đ.

    2015-01-01

    Full Text Available The field of heterogeneous catalysis, specifically catalysis on bimetallic surfaces, has seen many advances over the past few decades. Bimetallic catalysts, which often show electronic and chemical properties that are distinct from those of their parent metals, offer the opportunity to obtain new catalysts with enhanced selectivity, activity, and stability. The oxidation of formic acid is of permanent interest as a model reaction for the mechanistic understanding of the electrooxidation of small organic molecules and because of its technical relevance for fuel cell applications. Platinum is one of the most commonly used catalysts for this reaction, despite the fact that it shows a few significant disadvantages: high cost and extreme susceptibility to poisoning by CO. To solve this problem, several approaches have been used, but generally, they all consist in the modification of platinum with a second element. Especially, bismuth has received significant attention as Pt modifier. According to the results presented in this survey dealing with the effects influencing the formic acid oxidation it was found that two types of Pt-Bi bimetallic catalysts (bulk and low loading deposits on GC showed superior catalytic activity in terms of the lower onset potential and oxidation current density, as well as exceptional stability compared to Pt. The findings in this report are important for the understanding of mechanism of formic acid electrooxidation on a bulk alloy and decorated surface, for the development of advanced anode catalysts for direct formic acid fuel cells, as well as for the synthesis of novel low-loading bimetallic catalysts. The use of bimetallic compounds as the anode catalysts is an effective solution to overcoming the problems of the formic acid oxidation current stability for long term applications. In the future, the tolerance of both CO poisoning and electrochemical leaching should be considered as the key factors in the development

  11. Formic Acid Oxidation at Platinum-Bismuth Clusters

    DEFF Research Database (Denmark)

    Lovic, J. D.; Stevanovic, S. I.; Tripkovic, D. V.

    2014-01-01

    Formic acid oxidation was studied on platinum-bismuth deposits on glassy carbon (GC) substrate. The catalysts of equimolar ratio were prepared by potentiostatic deposition using chronocoulometry. Bimetallic structures obtained by two-step process, comprising deposition of Bi followed by deposition...

  12. Dental discoloration caused by bismuth oxide in MTA in the presence of sodium hypochlorite.

    Science.gov (United States)

    Marciano, Marina Angélica; Duarte, Marco Antonio Hungaro; Camilleri, Josette

    2015-12-01

    The aim of this research was to analyse the dental discolouration caused by mineral trioxide aggregate (MTA) induced by bismuth oxide and also assess the colour stability of other dental cements. Bismuth oxide, calcium tungstate and zirconium oxide were placed in contact with sodium hypochlorite for 24 h after which they were dried and photographed. Phase analyses were performed by X-ray diffraction (XRD) of radiopacifiers before and after immersion in sodium hypochlorite. Furthermore, teeth previously immersed in water or sodium hypochlorite were filled with MTA Angelus, Portland cement (PC), PC with 20 % zirconium oxide, PC with 20 % calcium tungstate and Biodentine. Teeth were immersed for 28 days in Hank's balanced salt solution after which they were sectioned and characterized using scanning electron microscopy (SEM) with energy-dispersive mapping and stereomicroscopy. Bismuth oxide in contact with sodium hypochlorite exhibited a change in colour from light yellow to dark brown. XRD analysis demonstrated peaks for radiopacifier and sodium chloride in samples immersed in sodium hypochlorite. The SEM images of the dentine to material interface showed alteration in material microstructure for MTA Angelus and Biodentine with depletion in calcium content in the material. The energy-dispersive maps showed migration of radiopacifier and silicon in dentine. MTA Angelus in contact with a tooth previously immersed in sodium hypochlorite resulted in colour alteration at the cement/dentine interface. MTA Angelus should not be used after irrigation with sodium hypochlorite as this will result in tooth discoloration.

  13. High ionic conductivity in confined bismuth oxide-based heterostructures

    DEFF Research Database (Denmark)

    Sanna, Simone; Esposito, Vincenzo; Christensen, Mogens

    2016-01-01

    Bismuth trioxide in the cubic fluorite phase (δ-Bi2O3) exhibits the highest oxygen ionic conductivity. In this study, we were able to stabilize the pure -Bi2O3 at low temperature with no addition of stabilizer but only by engineering the interface, using highly coherent heterostructures made...... of alternative layers of δ-Bi2O3 and Yttria Stabilized Zirconia (YSZ), deposited by pulsed laser deposition. The resulting [δ-Bi2O3=YSZ] heterostructures are found to be stable over a wide temperature range (500-750 °C) and exhibits stable high ionic conductivity over a long time comparable to the value...

  14. Bismuth and polonium

    International Nuclear Information System (INIS)

    Brown, Paul L.; Ekberg, Christian

    2016-01-01

    Bismuth and polonium are the only elements in their respective chemical series that form cations. The lighter elements in both groups only form anions. Bismuth has trivalent and pentavalent oxidation states, but the latter is relatively unstable with respect to formation of the oxide. Polonium exhibits a range of oxidation states, with the divalent and tetravalent states forming the cations Po 2+ and PoO 2+ in aqueous solution. In aqueous solution, polonium(IV) forms the oxoanion PoO 2+ . Levy, Danford and Agron conducted X-ray diffraction studies of bismuth(III) solutions and established a structure for the hexameric species, Bi 6 (OH) 12 6+ . The reported data for the solubility constants of polymeric species of bismuth (III) are listed in this chapter. The stability and solubility constants derived at 25 C for zero ionic strength have been used to create a predominance speciation diagram for bismuth(III).

  15. Growth of Li doped bismuth oxide nanorods and its electrochemical performance for the determination of L-cysteine

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Yong, E-mail: yongwen1982@163.com [School of Civil Engineering and Architecture, Xinjiang University (China); Pei, Li-zhai; Wei, Tian [chool of Materials Science and Engineering, Anhui University of Technology (China)

    2017-05-15

    Li doped bismuth oxide nanorods have been prepared using sodium bismuthate and Li acetate. X-ray diffraction (XRD) pattern shows that the nanorods are composed of monoclinic Bi{sub 2}O{sub 4} and cubic LiBi{sub 12}O{sub 18.50} phases. Scanning electron microscopy (SEM) observation shows that the nanorods have the length and diameter of 1-5 μm and 50-350 nm, respectively. The formation of the Li doped bismuth oxide nanorods is closely relative to the hydrothermal conditions. The electrochemical performance for the determination of L-cysteine based on a Li doped bismuth oxide nanorods modified glassy carbon electrode (GCE) has been developed. The CV peak current increases obviously and linearly with increasing the scan rate. Under the optimal conditions, Li doped bismuth oxide nanorods modified GCE exhibits good analytical performance with good reproducibility and stability. The linear range of L-cysteine is 0.0001-2 mM and the detection limit is 0.36 μM and 0.17 μM for cvp1 and cvp2, respectively. (author)

  16. Growth of Li doped bismuth oxide nanorods and its electrochemical performance for the determination of L-cysteine

    International Nuclear Information System (INIS)

    Wen, Yong; Pei, Li-zhai; Wei, Tian

    2017-01-01

    Li doped bismuth oxide nanorods have been prepared using sodium bismuthate and Li acetate. X-ray diffraction (XRD) pattern shows that the nanorods are composed of monoclinic Bi 2 O 4 and cubic LiBi 12 O 18.50 phases. Scanning electron microscopy (SEM) observation shows that the nanorods have the length and diameter of 1-5 μm and 50-350 nm, respectively. The formation of the Li doped bismuth oxide nanorods is closely relative to the hydrothermal conditions. The electrochemical performance for the determination of L-cysteine based on a Li doped bismuth oxide nanorods modified glassy carbon electrode (GCE) has been developed. The CV peak current increases obviously and linearly with increasing the scan rate. Under the optimal conditions, Li doped bismuth oxide nanorods modified GCE exhibits good analytical performance with good reproducibility and stability. The linear range of L-cysteine is 0.0001-2 mM and the detection limit is 0.36 μM and 0.17 μM for cvp1 and cvp2, respectively. (author)

  17. Microstructure and electrical properties of bismuth and bismuth oxide deposited by magnetron sputtering UBM

    International Nuclear Information System (INIS)

    Otalora B, D. M.; Dussan, A.; Olaya F, J. J.

    2015-01-01

    In this work, bismuth (Bi) and bismuth oxide (Bi 2 O 3 ) thin films were prepared, at room temperature, by Sputtering Unbalanced Magnetron (UBM - Unbalance Magnetron) technique under glass substrates. Microstructural and electrical properties of the samples were studied by X-ray diffraction (XRD) and System for Measuring Physical Properties - PPMS (Physical Property Measurement System). Dark resistivity of the material was measured for a temperature range between 100 and 400 K. From the XRD measurements it was observed a polycrystalline character of the Bi associated to the presence of phases above the main peak, 2θ = 26.42 grades and a growth governed by a rhombohedral structure. Crystal parameters were obtained for both compounds, Bi and Bi 2 O 3 . From the analysis of the spectra of the conductivity as a function of temperature, it was established that the transport mechanism that governs the region of high temperature (T>300 K) is thermally activated carriers. From conductivity measurements the activation energies were obtained of 0.0094 eV and 0.015 eV for Bi 2 O 3 and Bi, respectively. (Author)

  18. High ionic conductivity in confined bismuth oxide-based heterostructures

    Directory of Open Access Journals (Sweden)

    Simone Sanna

    2016-12-01

    Full Text Available Bismuth trioxide in the cubic fluorite phase (δ-Bi2O3 exhibits the highest oxygen ionic conductivity. In this study, we were able to stabilize the pure δ-Bi2O3 at low temperature with no addition of stabilizer but only by engineering the interface, using highly coherent heterostructures made of alternative layers of δ-Bi2O3 and Yttria Stabilized Zirconia (YSZ, deposited by pulsed laser deposition. The resulting [δ-Bi2O3/YSZ] heterostructures are found to be stable over a wide temperature range (500-750 °C and exhibits stable high ionic conductivity over a long time comparable to the value of the pure δ-Bi2O3, which is approximately two orders of magnitude higher than the conductivity of YSZ bulk.

  19. High ionic conductivity in confined bismuth oxide-based heterostructures

    DEFF Research Database (Denmark)

    Sanna, Simone; Esposito, Vincenzo; Christensen, Mogens

    2016-01-01

    Bismuth trioxide in the cubic fluorite phase (δ-Bi2O3) exhibits the highest oxygen ionic conductivity. In this study, we were able to stabilize the pure -Bi2O3 at low temperature with no addition of stabilizer but only by engineering the interface, using highly coherent heterostructures made...... of alternative layers of δ-Bi2O3 and Yttria Stabilized Zirconia (YSZ), deposited by pulsed laser deposition. The resulting [δ-Bi2O3=YSZ] heterostructures are found to be stable over a wide temperature range (500-750 °C) and exhibits stable high ionic conductivity over a long time comparable to the value...... of the pure δ-Bi2O3, which is approximately two orders of magnitude higher than the conductivity of YSZ bulk....

  20. Yttrium bismuth titanate pyrochlore mixed oxides for photocatalytic hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Merka, Oliver

    2012-10-18

    In this work, the sol-gel synthesis of new non-stoichiometric pyrochlore titanates and their application in photocatalytic hydrogen production is reported. Visible light response is achieved by introducing bismuth on the A site or by doping the B site by transition metal cations featuring partially filled d orbitals. This work clearly focusses on atomic scale structural changes induced by the systematical introduction of non-stoichiometry in pyrochlore mixed oxides and the resulting influence on the activity in photocatalytic hydrogen production. The materials were characterized in detail regarding their optical properties and their atomic structure. The pyrochlore structure tolerates tremendous stoichiometry variations. The non-stoichiometry in A{sub 2}O{sub 3} rich compositions is compensated by distortions in the cationic sub-lattice for the smaller Y{sup 3+} cation and by evolution of a secondary phase for the larger Bi{sup 3+} cation on the A site. For TiO{sub 2} rich compositions, the non-stoichiometry leads to a special vacancy formation in the A and optionally O' sites. It is shown that pyrochlore mixed oxides in the yttrium bismuth titanate system represent very active and promising materials for photocatalytic hydrogen production, if precisely and carefully tuned. Whereas Y{sub 2}Ti{sub 2}O{sub 7} yields stable hydrogen production rates over time, the bismuth richer compounds of YBiTi{sub 2}O{sub 7} and Bi{sub 2}Ti{sub 2}O{sub 7} are found to be not stable under irradiation. This drawback is overcome by applying a special co-catalyst system consisting of a precious metal core and a Cr{sub 2}O{sub 3} shell on the photocatalysts.

  1. Bismuth Oxide Nanoparticles in the Stratosphere

    Science.gov (United States)

    Rietmeijer, Frans J. M.; Mackinnon, Ian D. R.

    1997-01-01

    Platey grains of cubic Bi2O3, alpha-Bi2O3, and Bi2O(2.75), nanograins were associated with chondritic porous interplanetary dust particles W7029C1, W7029E5, and 2011C2 that were collected in the stratosphere at 17-19 km altitude. Similar Bi oxide nanograins were present in the upper stratosphere during May 1985. These grains are linked to the plumes of several major volcanic eruptions during the early 1980s that injected material into the stratosphere. The mass of sulfur from these eruptions is a proxy for the mass of stratospheric Bi from which we derive the particle number densities (p/cu m) for "average Bi2O3 nanograins" due to this volcanic activity and those necessary to contaminate the extraterrestrial chondritic porous interplanetary dust particles via collisional sticking. The match between both values supports the idea that Bi2O3 nanograins of volcanic origin could contaminate interplanetary dust particles in the Earth's stratosphere.

  2. Selective oxidation of propylene to acrolein by silica-supported bismuth molybdate catalysts

    DEFF Research Database (Denmark)

    Duc, Duc Truong; Ha, Hanh Nguyen; Fehrmann, Rasmus

    2011-01-01

    Silica-supported bismuth molybdate catalysts have been prepared by impregnation, structurally characterized and examined as improved catalysts for the selective oxidation of propylene to acrolein. Catalysts with a wide range of loadings (from 10 to 90 wt%) of beta bismuth molybdate (β-Bi2Mo2O9...

  3. Photoconductivity in Transition Metal Doped Bismuth Germanium Oxide

    Science.gov (United States)

    Newkirk, Nolan M.; McCullough, J. S.; Martin, J. J.

    1999-10-01

    Bismuth germanium oxide (BGO) is a photorefractive material that has potential for a number of applications. We are investigating the possibility of tailoring it for specific uses by doping with 3d-ions. . Anti-site bismuth is a native defect in melt-grown BGO. This amphoteric defect dominates the photo-response of undoped BGO and plays a role in transition metal doped samples. The majority of the 3d-ions go into the tetrahedrally bonded Ge-site; thus, Cr would be expected to be in a 4+ state. Instead, it gives up an electron to the anti-site Bi and is in a 5+ state. Strongly persistent photorefractive gratings are observed in BGO:Cr. Photoconductivity measurements were performed on undoped BGO, BGO:V, and BGO:Cr before and after the samples were exposed to 442 nm light. The photoconductivity response roughly matched the optical absorption spectra of the samples. The exposed samples showed additional photo-induced absorption bands and much stronger photocurrents in the same spectral regions. The exposure to blue light appears to convert Cr from the 5+ state to the 4+state.

  4. Radiopacity and histological assessment of Portland cement plus bismuth oxide.

    Science.gov (United States)

    Coutinho-Filho, Tauby; De-Deus, Gustavo; Klein, Leila; Manera, Gisele; Peixoto, Carla; Gurgel-Filho, Eduardo Diogo

    2008-12-01

    The present study evaluated the subcutaneous connective tissue reactions and the radiopacity of MTA, Portland cement (PC), and Portland cement plus bismuth oxide (BO). Forty rats were divided into 5 groups (n = 8 per group): A1: Control (empty capsule); A2: Pro-Root MTA; A3: PC; A4: PC + BO 1:1; and A5: PC + BO 2:1. Polyethylene tubes were filled with the test materials and standardized radiographic images were taken. Histological evaluation was done after 7 and 60 days. Student t test and Fisher's test were used in the statistical analysis (P A4 > A5 > A3. No differences were found for the tissue response in the 2 experimental periods. A positive correlation between BO concentration and radiopacity of PC was determined. The histological evaluation suggests that all studied materials were biocompatible at 7 and 60 days.

  5. Bismuth oxide aqueous colloidal nanoparticles inhibit Candida albicans growth and biofilm formation

    Science.gov (United States)

    Hernandez-Delgadillo, Rene; Velasco-Arias, Donaji; Martinez-Sanmiguel, Juan Jose; Diaz, David; Zumeta-Dube, Inti; Arevalo-Niño, Katiushka; Cabral-Romero, Claudio

    2013-01-01

    Multiresistance among microorganisms to common antimicrobials has become one of the most significant concerns in modern medicine. Nanomaterials are a new alternative to successfully treat the multiresistant microorganisms. Nanostructured materials are used in many fields, including biological sciences and medicine. Recently, it was demonstrated that the bactericidal activity of zero-valent bismuth colloidal nanoparticles inhibited the growth of Streptococcus mutans; however the antimycotic potential of bismuth nanostructured derivatives has not yet been studied. The main objective of this investigation was to analyze the fungicidal activity of bismuth oxide nanoparticles against Candida albicans, and their antibiofilm capabilities. Our results showed that aqueous colloidal bismuth oxide nanoparticles displayed antimicrobial activity against C. albicans growth (reducing colony size by 85%) and a complete inhibition of biofilm formation. These results are better than those obtained with chlorhexidine, nystatin, and terbinafine, the most effective oral antiseptic and commercial antifungal agents. In this work, we also compared the antimycotic activities of bulk bismuth oxide and bismuth nitrate, the precursor metallic salt. These results suggest that bismuth oxide colloidal nanoparticles could be a very interesting candidate as a fungicidal agent to be incorporated into an oral antiseptic. Additionally, we determined the minimum inhibitory concentration for the synthesized aqueous colloidal Bi2O3 nanoparticles. PMID:23637533

  6. Intrinsic stress of bismuth oxide thin films: effect of vapour chopping and air ageing

    International Nuclear Information System (INIS)

    Patil, R B; Puri, R K; Puri, V

    2008-01-01

    Bismuth oxide thin films of thickness 1000 A 0 have been prepared by thermal oxidation (in air) of vacuum evaporated bismuth thin films (on glass substrate) at different oxidation temperatures and duration. Both the vapour chopped and nonchopped bismuth oxide thin films showed polycrystalline and polymorphic structure. The monoclinic bismuth oxide was found to be predominant in both the cases. The effect of vapour chopping and air exposure for 40 days on the intrinsic stress of bismuth oxide thin films has been studied. The vapour chopped films showed low (3.92 - 4.80 x 10 9 N/m 2 ) intrinsic stress than those of nonchopped bismuth oxide thin films (5.77 - 6.74 x 10 9 N/m 2 ). Intrinsic stress was found to increase due to air ageing. The effect of air ageing on the vapour chopped films was found low. The vapour chopped films showed higher packing density. Higher the packing density, lower the film will age. The process of chopping vapour flow creates films with less inhomogenety i.e. a low concentration of flaws and non-planar defects which results in lower intrinsic stress

  7. Evaluation of the strength and radiopacity of Portland cement with varying additions of bismuth oxide.

    Science.gov (United States)

    Saliba, E; Abbassi-Ghadi, S; Vowles, R; Camilleri, J; Hooper, S; Camilleri, J

    2009-04-01

    To study the effect of addition of various proportions of bismuth oxide on compressive strength and radiopacity of Portland cement. The compressive strength of white Portland cement and cement replaced with 10, 15, 20, 25 and 30% bismuth oxide was evaluated by testing cylinders 6 mm in diameter and 12 mm high. Twelve cylinders were tested for each material under study. The radiopacity of the cements tested was evaluated using an aluminium step-wedge and densitometer. The optical density was compared with the relevant thickness of aluminium (Al). Statistical analysis was performed using Analysis of Variance (ANOVA) with P = 0.05 and Tukey test to perform multiple comparison tests. Various additions of bismuth oxide had no significant effect on the strength of the material when compared with the unmodified Portland cement (P > 0.05). The radiopacity of the cements tested ranged from 2.02 mm Al for Portland cement to 9.79 mm Al for the highest bismuth replacement. Addition of bismuth oxide did not affect the compressive strength of Portland cement. All the bismuth oxide cement mixtures had radio-opacities higher than 3 mm thickness of aluminium.

  8. Bismuth oxide nanorods based immunosensor for mycotoxin detection.

    Science.gov (United States)

    Solanki, Pratima R; Singh, Jay; Rupavali, Bharti; Tiwari, Sachchidanand; Malhotra, Bansi D

    2017-01-01

    We report results of the studies relating to fabrication of an efficient immunosensor based on bismuth oxide nanorods (nBi 2 O 3 ), electrophoretically deposited onto indium-tin-oxide (ITO) coated glass substrate. This immunosensor was fabricated by immobilization of anti-aflatoxin monoclonal antibodies (Ab-AFB1) and bovine serum albumin (BSA) for aflatoxin B1 detection. The structural and morphological studies of n-Bi 2 O 3 have been carried out by XRD, UV-vis spectrophotometer; SEM, AFM and FTIR. It was found that the nBi 2 O 3 provided improved sensing characteristics to the electrode interface in terms of electroactive surface area, diffusion coefficient, charge transfer rate constant and electron transfer kinetics. The results of electrochemical response studies of this BSA/Ab-AFB1/nBi 2 O 3 /ITO immunosensor revealed good linearity in the range of 1-70ngdL -1 with low detection limit of 8.715ng/dL, improved sensitivity of 1.132μA/(ng/dLcm -2 ), regression coefficient R 2 of 0.918 and reproducibility of >11 times. The association constant for the BSA/Ab-AFB1/nBi 2 O 3 /ITO immunosensor was determined as 7.318ng/dL. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Facile solvothermal synthesis of a graphene nanosheet-bismuth oxide composite and its electrochemical characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Wang Huanwen [Key Laboratory of Eco-Environment-Related Polymer Materials of Ministry of Education, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Hu Zhongai, E-mail: zhongai@nwnu.edu.c [Key Laboratory of Eco-Environment-Related Polymer Materials of Ministry of Education, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Chang Yanqin; Chen Yanli; Lei Ziqiang; Zhang Ziyu; Yang Yuying [Key Laboratory of Eco-Environment-Related Polymer Materials of Ministry of Education, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China)

    2010-12-01

    This work demonstrates a novel and facile route for preparing graphene-based composites comprising of metal oxide nanoparticles and graphene. A graphene nanosheet-bismuth oxide composite as electrode materials of supercapacitors was firstly synthesized by thermally treating the graphene-bismuth composite, which was obtained through simultaneous solvothermal reduction of the colloidal dispersions of negatively charged graphene oxide sheets in N,N-dimethyl formamide (DMF) solution of bismuth cations at 180 {sup o}C. The morphology, composition, and microstructure of the composites together with pure graphite oxide, and graphene were characterized using powder X-ray diffraction (XRD), FT-IR, field emission scanning electron microscopy (FESEM), transmission electron microscope (TEM), thermogravimetry and differential thermogravimetry (TG-DTG). The electrochemical behaviors were measured by cyclic voltammogram (CV), galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS). The specific capacitance of 255 F g{sup -1} (based on composite) is obtained at a specific current of 1 A g{sup -1} as compared with 71 F g{sup -1} for pure graphene. The loaded-bismuth oxide achieves a specific capacitance as high as 757 F g{sup -1} even at 10 A g{sup -1}. In addition, the graphene nanosheet-bismuth oxide composite electrode exhibits the excellent rate capability and well reversibility.

  10. Improved proton CT imaging using a bismuth germanium oxide scintillator

    Science.gov (United States)

    Tanaka, Sodai; Nishio, Teiji; Tsuneda, Masato; Matsushita, Keiichiro; Kabuki, Shigeto; Uesaka, Mitsuru

    2018-02-01

    Range uncertainty is among the most formidable challenges associated with the treatment planning of proton therapy. Proton imaging, which includes proton radiography and proton computed tomography (pCT), is a useful verification tool. We have developed a pCT detection system that uses a thick bismuth germanium oxide (BGO) scintillator and a CCD camera. The current method is based on a previous detection system that used a plastic scintillator, and implements improved image processing techniques. In the new system, the scintillation light intensity is integrated along the proton beam path by the BGO scintillator, and acquired as a two-dimensional distribution with the CCD camera. The range of a penetrating proton is derived from the integrated light intensity using a light-to-range conversion table, and a pCT image can be reconstructed. The proton range in the BGO scintillator is shorter than in the plastic scintillator, so errors due to extended proton ranges can be reduced. To demonstrate the feasibility of the pCT system, an experiment was performed using a 70 MeV proton beam created by the AVF930 cyclotron at the National Institute of Radiological Sciences. The accuracy of the light-to-range conversion table, which is susceptible to errors due to its spatial dependence, was investigated, and the errors in the acquired pixel values were less than 0.5 mm. Images of various materials were acquired, and the pixel-value errors were within 3.1%, which represents an improvement over previous results. We also obtained a pCT image of an edible chicken piece, the first of its kind for a biological material, and internal structures approximately one millimeter in size were clearly observed. This pCT imaging system is fast and simple, and based on these findings, we anticipate that we can acquire 200 MeV pCT images using the BGO scintillator system.

  11. Synthesis of binary bismuth-cadmium oxide nanorods with sensitive electrochemical sensing performance

    International Nuclear Information System (INIS)

    Wen, Yong; Pei, Lizhai; Wei, Tian

    2017-01-01

    Binary bismuth-cadmium oxide nanorods have been synthesized by a simple hydrothermal process without templates and additives. X-ray diffraction and high-resolution transmission electron microscopy reveal that the nanorods possess single crystalline tetragonal Bi 2 CdO 4 phase. Scanning electron microscopy and transmission electron microscopy images show that the length and diameter of the nanorods are 20-300 nm and 5-10 μm, respectively. The formation of the binary bismuth-cadmium oxide nanorods is closely related to the hydrothermal parameters. The electrochemical sensing performance of the binary bismuth-cadmium oxide nanorods has been investigated using the nanorods as glassy carbon electrode modifiers. The detection limit is 0.19 μM with a linear range of 0.0005-2 mM. The nanorod-modified glassy carbon electrode exhibits good electrocatalytic activity toward L-cysteine and great application potential for electrochemical sensors.

  12. Synthesis of binary bismuth-cadmium oxide nanorods with sensitive electrochemical sensing performance

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Yong [Xinjiang Univ., Xinjiang (China). School of Civil Engineering and Architecture; Pei, Lizhai; Wei, Tian [Anhui Univ. of Technology, Anhui (China). School of Materials Science and Engineering

    2017-07-15

    Binary bismuth-cadmium oxide nanorods have been synthesized by a simple hydrothermal process without templates and additives. X-ray diffraction and high-resolution transmission electron microscopy reveal that the nanorods possess single crystalline tetragonal Bi{sub 2}CdO{sub 4} phase. Scanning electron microscopy and transmission electron microscopy images show that the length and diameter of the nanorods are 20-300 nm and 5-10 μm, respectively. The formation of the binary bismuth-cadmium oxide nanorods is closely related to the hydrothermal parameters. The electrochemical sensing performance of the binary bismuth-cadmium oxide nanorods has been investigated using the nanorods as glassy carbon electrode modifiers. The detection limit is 0.19 μM with a linear range of 0.0005-2 mM. The nanorod-modified glassy carbon electrode exhibits good electrocatalytic activity toward L-cysteine and great application potential for electrochemical sensors.

  13. Structure-Composition-Property Relationships of Complex Bismuth Oxide Based Photocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, Thomas [Univ. of South Carolina, Columbia, SC (United States). Dept. of Chemistry and Biochemistry

    2014-01-08

    Development of a new family of up- and down-conversion materials based on oxtfluorides that can potentially increase photocatalytic activities of photocatalysts such as bismuth oxides and can also be used as phosphors in Al1-xGaxN-based devices and solar devices.

  14. Preparation of Bismuth Oxide Photocatalyst and Its Application in White-light LEDs

    Directory of Open Access Journals (Sweden)

    Yen-Chang Chu

    2013-01-01

    Full Text Available Bismuth oxide photocatalysts were synthesized and coated on the front surface of phosphor-converted white light-emitting diodes to produce a safe and environmentally benign lighting source. Bismuth oxide photocatalyst powders were synthesized with a spray pyrolysis method at 500°C, 600°C, 700°C, and 800°C. Using the absorption spectrum in the blue and UV regions of the bismuth oxide photocatalysts, the blue light and UV leakage problems of phosphor-converted white LEDs can be significantly reduced. The experimental results showed that bismuth oxide photocatalyst synthesized at 700°C exhibited the most superior spectrum inhibiting ability. The suppressed ratio reached 52.33% in the blue and UV regions from 360 to 420 nm. Related colorimetric parameters and the photocatalyst decomposition ability of fabricated white-light LEDs were tested. The CIE chromaticity coordinates (x,y were (0.349, 0.393, and the correlated color temperature was 4991 K. In addition, the coating layer of photocatalyst can act as an air purifier and diffuser to reduce glare. A value of 66.2±0.60 ppmv of molecular formaldehyde gas can be decomposed in 120 mins.

  15. Studying Impact of Different Precipitating Agents on Crystal Structure, Morphology and Photocatalytic Activity of Bismuth Oxide

    Directory of Open Access Journals (Sweden)

    Yayuk Astuti

    2017-10-01

    How to Cite: Astuti, Y., Arnelli, Pardoyo, Fauziyah, A., Nurhayati, S., Wulansari, A.D., Andianingrum, R., Widiyandari, H., Bhaduri, G.A. (2017. Studying Impact of Different Precipitating Agents on Crystal Structure, Morphology and Photocatalytic Activity of Bismuth Oxide. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (3: 478-484 (doi:10.9767/bcrec.12.3.1144.478-484

  16. Dynamic spatial structure of spontaneous beams in photorefractive bismuth sillicon oxide

    DEFF Research Database (Denmark)

    Buchhave, Preben; Lyuksyutov, S.; Vasnetsov, M.

    1996-01-01

    We report the domain structure of spontaneously occurring beams (subharmonics) in photorefractive bismuth silicon oxide with an applied electric field from 1 to 6 kV/cm and a running grating. The subharmonic beams are generated in a pattern of domains that evolve dynamically as they move through...

  17. Methylene blue photocatalysis in the presence of bismuth oxide under UV and solar light irradiation

    Directory of Open Access Journals (Sweden)

    Vanessa Rocha Liberatti

    2014-05-01

    Full Text Available Bismuth oxide (Bi2O3, an n-type semiconductor has been satisfactorily investigated for photocatalytic organic contaminant remediation. The Bi2O3 was prepared by solution combustion synthesis (SCS using as the oxidizing bismuth nitrate in acidic medium and urea as fuel. The influence of the type of synthesis on the photocatalytic properties of the oxide formed was investigated by XRD. From the diffractograms was verified that the materials obtained are predominantly of Bi2O3 crystals, it is possible to identify a sample with two crystalline phases, monoclinic (α-Bi2O3 and tetragonal (β-Bi2O3, and the other with only the monoclinic (α-Bi2O3. The two-phase oxide showed higher photocatalytic activity for discoloration of methylene blue under UV irradiation (60.59% and under sunlight (61.64% in 664 nm, followed kinetic law of pseudo-first order.

  18. Oxidative stability of polyaniline

    Czech Academy of Sciences Publication Activity Database

    Stejskal, Jaroslav; Exnerová, Milena; Morávková, Zuzana; Trchová, Miroslava; Hromádková, Jiřina; Prokeš, J.

    2012-01-01

    Roč. 97, č. 6 (2012), s. 1026-1033 ISSN 0141-3910 R&D Projects: GA ČR GA202/09/1626; GA ČR GAP205/12/0911 Institutional research plan: CEZ:AV0Z40500505 Institutional support: RVO:61389013 Keywords : polyaniline * nanotubes * oxidation stability Subject RIV: BK - Fluid Dynamics Impact factor: 2.770, year: 2012

  19. Bismuth oxide film: a promising room-temperature quantum spin Hall insulator

    Science.gov (United States)

    Wang, Ya-Ping; Li, Sheng-Shi; Ji, Wei-Xiao; Zhang, Chang-Wen; Li, Ping; Wang, Pei-Ji

    2018-03-01

    Two-dimensional (2D) bismuth films have attracted extensive attention due to their nontrivial band topology and tunable electronic properties for achieving dissipationless transport devices. The experimental observation of quantum transport properties, however, are rather challenging, limiting their potential application in nanodevices. Here, we predict, based on first-principles calculations, an alternative 2D bismuth oxide, BiO, as an excellent topological insulator (TI), whose intrinsic bulk gap reaches up to 0.28 eV. Its nontrivial topology is confirmed by topological invariant Z 2 and time-reversal symmetry protected helical edge states. The appearance of topological phase is robust against mechanical strain and different levels of oxygen coverage in BiO. Since the BiO is naturally stable against surface oxidization and degradation, these results enrich the topological materials and present an alternative way to design topotronics devices at room temperature.

  20. Analysis of the color alteration and radiopacity promoted by bismuth oxide in calcium silicate cement

    Directory of Open Access Journals (Sweden)

    Marina Angelica Marciano

    2013-07-01

    Full Text Available The aim of the study was to determine if the increase in radiopacity provided by bismuth oxide is related to the color alteration of calcium silicate-based cement. Calcium silicate cement (CSC was mixed with 0%, 15%, 20%, 30% and 50% of bismuth oxide (BO, determined by weight. Mineral trioxide aggregate (MTA was the control group. The radiopacity test was performed according to ISO 6876/2001. The color was evaluated using the CIE system. The assessments were performed after 24 hours, 7 and 30 days of setting time, using a spectrophotometer to obtain the ΔE, Δa, Δb and ΔL values. The statistical analyses were performed using the Kruskal-Wallis/Dunn and ANOVA/Tukey tests (p 3 mm equivalent of Al. The MTA group was statistically similar to the CSC / 30% BO group (p > 0.05. In regard to color, the increase of bismuth oxide resulted in a decrease in the ΔE value of the calcium silicate cement. The CSC group presented statistically higher ΔE values than the CSC / 50% BO group (p < 0.05. The comparison between 24 hours and 7 days showed higher ΔE for the MTA group, with statistical differences for the CSC / 15% BO and CSC / 50% BO groups (p < 0.05. After 30 days, CSC showed statistically higher ΔE values than CSC / 30% BO and CSC / 50% BO (p < 0.05. In conclusion, the increase in radiopacity provided by bismuth oxide has no relation to the color alteration of calcium silicate-based cements.

  1. Pharmacokinetics of metronidazole, tetracycline and bismuth in healthy volunteers after oral administration of compound tablets containing a combination of metronidazole, tetracycline hydrochloride and bismuth oxide.

    Science.gov (United States)

    Wu, Y; Ding, L; Huang, N-Y; Wen, A-D; Liu, B; Li, W-B

    2015-02-01

    To eradicate Helicobacter pylori in human pylorus and to heal duodenal ulcers, recently, a new formulation of combination tablets containing metronidazole 125 mg, tetracycline hydrochloride 125 mg and bismuth oxide 40 mg has been developed. To investigate the pharmacokinetics of metronidazole, tetracycline and bismuth in healthy Chinese volunteers after oral administration of the test formulation. A one-sequence, 3-period study was conducted in 12 Chinese healthy volunteers (6 male, 6 female). Volunteers each received single low dose (1 tablet) under fed condition in period 1, single high dose (3 tablets) under fasted condition in period 2, and single high dose (3 tablets) and multiple doses (3 tablets at once, 4 times daily for 7 consecutive days) under fed condition in period 3. Blood samples were collected and determined over 48 h in every period. After single high dose administration under fed condition, the C max of metronidazole, tetracycline and bismuth were 6.833 ± 0.742 μg/mL, 0.8513 ± 0.1253 μg/mL and 3.32 ± 1.89 ng/mL, respectively. The C max and AUC 0-48 of metronidazole increased in proportion to the doses within the tested dose range, but tetracycline and bismuth did not. Food caused 10% and 80% decrease of the C max for metronidazole and bismuth, respectively, but did not affect tetracycline. No gender effect was found on the pharmacokinetics of the 3 ingredients. In the steady state, the C av of metronidazole, tetracycline and bismuth were 20.75 ± 3.52 μg/mL, 1.900 ± 0.243 μg/mL and 5.61 ± 1.34 ng/mL, respectively. © Georg Thieme Verlag KG Stuttgart · New York.

  2. The fabrication and thermal properties of bismuth-aluminum oxide nanothermometers.

    Science.gov (United States)

    Wang, Chiu-Yen; Chen, Shih-Hsun; Tsai, Ping-Hsin; Chiou, Chung-Han; Hsieh, Sheng-Jen

    2017-01-27

    Bismuth (Bi) nanowires, well controlled in length and diameter, were prepared by using an anodic aluminum oxide (AAO) template-assisted molding injection process with a high cooling rate. A high performance atomic layer deposition (ALD)-capped bismuth-aluminum oxide (Bi-Al 2 O 3 ) nanothermometer is demonstrated that was fabricated via a facile, low-cost and low-temperature method, including AAO templated-assisted molding injection and low-temperature ALD-capped processes. The thermal behaviors of Bi nanowires and Bi-Al 2 O 3 nanocables were studied by in situ heating transmission electron microscopy. Linear thermal expansion of liquid Bi within native bismuth oxide nanotubes and ALD-capped Bi-Al 2 O 3 nanocables were evaluated from 275 °C to 700 °C and 300 °C to 1000 °C, respectively. The results showed that the ALD-capped Bi-Al 2 O 3 nanocable possesses the highest working temperature, 1000 °C, and the broadest operation window, 300 °C-1000 °C, of a thermal-expanding type nanothermometer. Our innovative approach provides another way of fabricating core-shell nanocables and to further achieve sensing local temperature under an extreme high vacuum environment.

  3. Opto-electronic properties of bismuth oxide films presenting different crystallographic phases

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Celia L. [Instituto de Investigaciones en Materiales, UNAM, Circuito Exterior s/n CU, México D.F. 04510 (Mexico); Posgrado en Ciencia e Ingeniería de Materiales, UNAM, Unidad de Posgrado, Edificio C, Piso 1, Zona Cultural de CU, México, D.F. 04510 (Mexico); Depablos-Rivera, Osmary, E-mail: osmarydep@yahoo.com [Instituto de Investigaciones en Materiales, UNAM, Circuito Exterior s/n CU, México D.F. 04510 (Mexico); Posgrado en Ciencia e Ingeniería de Materiales, UNAM, Unidad de Posgrado, Edificio C, Piso 1, Zona Cultural de CU, México, D.F. 04510 (Mexico); Silva-Bermudez, Phaedra [Instituto de Investigaciones en Materiales, UNAM, Circuito Exterior s/n CU, México D.F. 04510 (Mexico); Instituto Nacional de Rehabilitación, Calz. México Xochimilco No. 289 Col. Arenal de Guadalupe, C.P.14389, Ciudad de México, D.F. (Mexico); Muhl, Stephen [Instituto de Investigaciones en Materiales, UNAM, Circuito Exterior s/n CU, México D.F. 04510 (Mexico); Zeinert, Andreas; Lejeune, Michael; Charvet, Stephane; Barroy, Pierre [Laboratoire de Physique de la Matière Condensée, Université de Picardie Jules Verne, 33 rue Saint Leu, 80039 Amiens Cedex 1 (France); Camps, Enrique [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca S/N, kilómetro 36.5. La Marquesa, Municipio de Ocoyoacac, CP 52750, Estado de México (Mexico); Rodil, Sandra E. [Instituto de Investigaciones en Materiales, UNAM, Circuito Exterior s/n CU, México D.F. 04510 (Mexico)

    2015-03-02

    The optical, electrical and structural properties of bismuth oxide thin films deposited by radio frequency reactive magnetron sputtering were studied. The Bi{sub 2}O{sub 3} thin films were grown on Si and glass substrates under different power and substrate temperatures in an oxygen-enriched plasma leading to films with different crystalline phase as evidenced by X-ray diffraction and Raman spectroscopy. The optical properties of the films were measured using ellipsometric spectroscopy and optical transmission spectra. In order to parameterize the optical dispersion functions (n, k) of the films, the Tauc–Lorentz dispersion model was used. The optical bandgap was then assessed by different methods and the results are compared to the thermal variations of the electrical resistivity of the films. It was found that the refractive index, extinction coefficient and optical gap strongly depend on the deposition conditions and the crystalline phase; the fluorite defect cubic δ-Bi{sub 2}O{sub 3} phase showed the lowest optical gap and lower resistivity. - Highlights: • Different bismuth oxide phases were obtained by sputtering. • The power and substrate temperature were the two key parameters. • Room temperature delta-Bi{sub 2}O{sub 3} thin films were obtained. • The optical bandgap was around 1.5 and 2.2 eV, depending on the phase. • The bismuth oxide films presented activation energies around 1 eV.

  4. First proof of bismuth oxide nanoparticles as efficient radiosensitisers on highly radioresistant cancer cells.

    Science.gov (United States)

    Stewart, Callum; Konstantinov, Konstantin; McKinnon, Sally; Guatelli, Susanna; Lerch, Michael; Rosenfeld, Anatoly; Tehei, Moeava; Corde, Stéphanie

    2016-11-01

    This study provides the first proof of the novel application of bismuth oxide as a radiosensitiser. It was shown that on the highly radioresistant 9L gliosarcoma cell line, bismuth oxide nanoparticles sensitise to both kilovoltage (kVp) or megavoltage (MV) X-rays radiation. 9L cells were exposed to a concentration of 50μg.mL -1 of nanoparticle before irradiation at 125kVp and 10MV. Sensitisation enhancement ratios of 1.48 and 1.25 for 125kVp and 10MV were obtained in vitro, respectively. The radiation enhancement of the nanoparticles is postulated to be a combination of the high Z nature of the bismuth (Z=83), and the surface chemistry. Monte Carlo simulations were performed to elucidate the physical interactions between the incident radiation and the nanoparticle. The results of this work show that Bi 2 O 3 nanoparticles increase the radiosensitivity of 9L gliosarcoma tumour cells for both kVp and MV energies. Monte Carlo simulations demonstrate the advantage of a platelet morphology. Copyright © 2016 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  5. Monte Carlo simulations for dose enhancement in cancer treatment using bismuth oxide nanoparticles implanted in brain soft tissue.

    Science.gov (United States)

    Taha, Eslam; Djouider, Fathi; Banoqitah, Essam

    2018-03-26

    The objective of this work is to study the dosimetric performances of bismuth oxide nanoparticles implanted in tumors in cancer radiotherapy. GEANT4 based Monte Carlo numerical simulations were performed to assess dose enhancement distributions in and around a 1 × 1 × 1 cm 3 tumor implanted with different concentrations of bismuth oxide and irradiated with low energies 125 I, 131 Cs, and 103 Pd radioactive sources. Dose contributions were considered from photoelectrons, Auger electrons, and characteristic X-rays. Our results show the dose enhancement increased with increasing both bismuth oxide concentration in the target and photon energy. A dose enhancement factor up to 18.55 was obtained for a concentration of 70 mg/g of bismuth oxide in the tumor when irradiated with 131 Cs source. This study showed that bismuth oxide nanoparticles are innovative agents that could be potentially applicable to in vivo cancer radiotherapy due to the fact that they induce a highly localized energy deposition within the tumor.

  6. Study of the bismuth oxide concentration required to provide Portland cement with adequate radiopacity for endodontic use.

    Science.gov (United States)

    Bueno, Carlos Eduardo da Silveira; Zeferino, Eduardo Gregatto; Manhães, Luiz Roberto Coutinho; Rocha, Daniel Guimarães Pedro; Cunha, Rodrigo Sanches; De Martin, Alexandre Sigrist

    2009-01-01

    The purpose of this study was to determine the ideal concentration of bismuth oxide in white Portland cement to provide it with sufficient radiopacity for use as an endodontic material (ADA specification #57). 2-mm thick standardized test specimens of white MTA and of white Portland cement, as controls, and of white Portland cement with the experimental addition of 5%, 10%, 15%, 20%, 25% or 30% of bismuth oxide were radiographed and compared with various thicknesses of pure aluminum, using optic density to determine the observed grayscale levels of radiopacity in a scale ranging from 0 to 255. The data was submitted to ANOVA (pPortland cement with 0%, 5%, 10%, 15%, 20%, 25% and 30% of bismuth oxide presented mean readings of 63.3, 95.7, 110.7, 142.7, 151.3, 161.0 and 180.0 respectively. MTA presented a mean reading of 157.3. The readings of MTA and white Portland cement with 15% bismuth oxide did not differ significantly from the reading observed for a thickness of 4 mm of aluminum (145.3), which is considered ideal for a test specimen by ADA specification #57 (2 mm above the thickness of the test specimen). White MTA and white Portland cement with 15% bismuth oxide presented the radiopacity required for an endodontic cement.

  7. Oxidative Dehydrogenation of n-Butenes to 1,3-Butadiene over Bismuth Molybdate and Ferrite Catalysts: A Review

    KAUST Repository

    Hong, Eunpyo

    2015-11-02

    1,3-Butadiene, an important raw material for a variety of chemical products, can be produced via the oxidative dehydrogenation (ODH) of n-butenes over multicomponent oxide catalysts based on bismuth molybdates and ferrites. In this review, the basic concept, reaction mechanism, and catalysts typically used in an ODH reaction are discussed. © 2015, Springer Science+Business Media New York.

  8. Selective oxidation of propylene to acrolein by hydrothermally synthesized bismuth molybdates

    DEFF Research Database (Denmark)

    Schuh, Kirsten; Kleist, Wolfgang; Høj, Martin

    2014-01-01

    Hydrothermal synthesis has been used as a soft chemical method to prepare bismuth molybdate catalysts for the selective oxidation of propylene to acrolein. All obtained samples displayed a plate-like morphology, but their individual aspect ratios varied with the hydrothermal synthesis conditions...... of nitric acid during hydrothermal synthesis enhanced both propylene conversion and acrolein yield, possibly due to a change in morphology. Formation of β-Bi2Mo2O9 was not observed under the applied conditions. In general, the catalytic performance of all samples decreased notably after calcination at 550...

  9. Enhanced piezoelectric properties and excellent thermal stabilities of cobalt-modified Aurivillius-type calcium bismuth titanate (CaBi4Ti4O15)

    International Nuclear Information System (INIS)

    Zhao, Tian-Long; Wang, Chun-Ming; Wang, Chun-Lei; Wang, Yi-Ming; Dong, Shuxiang

    2015-01-01

    Highlights: • Cobalt oxide modified CBT-based ceramics were prepared and investigated in detail. • XRPD analysis revealed Co ions enter into B-site of CBT-based ceramics. • CBT-Co4 ceramics show the enhanced d 33 of 14 pC/N and T c of 782 °C. • CBT-Co4 ceramics present the improved high-temperature resistivity. • Thermal depoling behavior indicates CBT-Co4 ceramics exhibit good thermal stability. - Abstract: Bismuth layer-structured ferroelectric (BLSF) calcium bismuth titanate (CaBi 4 Ti 4 O 15 , CBT) piezoelectric ceramics with 0.0–1.0 wt.% cobalt oxide (Co 2 O 3 ) have been prepared via a conventional solid-state reaction method. Microstructural morphology and electrical properties of cobalt oxide-modified CBT ceramics were investigated in detail. X-ray powder diffraction (XRPD) analysis revealed that the cobalt oxide-modified CBT ceramics have a pure four-layer Aurivillius-type structure. The piezoelectric properties of CBT ceramics were significantly enhanced by cobalt oxide modifications. The piezoelectric coefficient d 33 and Curie temperature T c of 0.2 wt.% cobalt oxide-modified CBT ceramics (CBT-Co4) are 14 pC/N and 782 °C, respectively. The DC resistivity and thermal depoling behavior at elevated temperature indicated that the CBT-Co4 ceramics exhibit good thermal stability, demonstrating that the CBT-Co4 ceramics are potential materials for high temperature piezoelectric applications.

  10. Simultaneous removal of Cr(VI) and phenol contaminants using Z-scheme bismuth oxyiodide/reduced graphene oxide/bismuth sulfide system under visible-light irradiation.

    Science.gov (United States)

    Chen, Acong; Bian, Zhaoyong; Xu, Jie; Xin, Xin; Wang, Hui

    2017-12-01

    An all-solid-state Z-scheme system containing Bi-based semiconductors bismuth oxyiodide (BiOI) and bismuth sulfide (Bi 2 S 3 ) was constructed on reduced graphene oxide (rGO) sheets through an electrostatic self-assembly method to simultaneously remove aqueous Cr(VI) and phenol. In this Z-scheme that mimicked natural photosynthesis, photoinduced electrons in the conduction band (CB) of BiOI were transferred through rGO and reacted with photoinduced holes in the valence band (VB) of Bi 2 S 3 , which significantly increased its photocatalytic activity. The reduction and oxidation reactions were performed on Bi 2 S 3 and BiOI photocatalysts, respectively. Furthermore, complex contaminants of coexisting heavy metal Cr(VI) and organic phenol were treated using the system under visible-light irradiation. Results showed that Cr(VI) reduction and phenol oxidation were achieved efficiently with optimum reductive and oxidative efficiencies up to 73% and 95% under visible-light irradiation, respectively. This work provided a promising method of simultaneously removing heavy metals and organic pollutants by using a Z-scheme system with enhanced photocatalytic activity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Synthesis of Bismuth Oxide Thin Films Deposited by Reactive Magnetron Sputtering

    International Nuclear Information System (INIS)

    Iljinas, A.; Burinskas, S.; Dudonis, J.

    2011-01-01

    In this work Bi 2 O 3 thin films were deposited onto the Si (111) and soda lime glass substrates by the reactive direct current magnetron sputtering system using pure Bi as a sputtering target. The dependences of electro-optical characteristics of the films on the substrate type and temperature were investigated. Transmittance and reflectance of the Bi 2 O 3 films were measured with ultraviolet and visible light spectrometer. It was found that the substrate temperature during deposition has a very strong influence on the phase components of thin films. The results indicate that the direct allowed transitions dominate in the films obtained in this work. For the direct allowed transitions the band gap energy is found to be about 1.98 eV and 2.2 eV. The reflectance of thin bismuth oxide film depends on the substrate. Small transparency of thin films grown on glass is more related to large reflectance than absorption. The reflectance spectra of the bismuth oxide thin films deposited on the Si substrates show higher quality of optical characteristics compared to the samples deposited on glass substrates. (author)

  12. Oxidation mechanism of T91 steel in liquid lead-bismuth eutectic: with consideration of internal oxidation

    Science.gov (United States)

    Ye, Zhongfei; Wang, Pei; Dong, Hong; Li, Dianzhong; Zhang, Yutuo; Li, Yiyi

    2016-01-01

    Clarification of the microscopic events that occur during oxidation is of great importance for understanding and consequently controlling the oxidation process. In this study the oxidation product formed on T91 ferritic/martensitic steel in oxygen saturated liquid lead-bismuth eutectic (LBE) at 823 K was characterized at the nanoscale using focused-ion beam and transmission electron microscope. An internal oxidation zone (IOZ) under the duplex oxide scale has been confirmed and characterized systematically. Through the microscopic characterization of the IOZ and the inner oxide layer, the micron-scale and nano-scale diffusion of Cr during the oxidation in LBE has been determined for the first time. The micron-scale diffusion of Cr ensures the continuous advancement of IOZ and inner oxide layer, and nano-scale diffusion of Cr gives rise to the typical appearance of the IOZ. Finally, a refined oxidation mechanism including the internal oxidation and the transformation of IOZ to inner oxide layer is proposed based on the discussion. The proposed oxidation mechanism succeeds in bridging the gap between the existing models and experimental observations. PMID:27734928

  13. Elastic Behavior of Borate Glasses Containing Lead and Bismuth Oxides

    Directory of Open Access Journals (Sweden)

    Mehrdad Khanisanij

    2014-01-01

    Full Text Available PbO and Bi2O3 binary borate glasses with different compositions, (MOX(B2O31−X (M = Pb, Bi, have been characterized and ultrasonic velocity as well as density is taken into account. In addition, the results have been compared with those of Ag, K, and Li oxide borate glasses from others. The ultrasonic velocities (both longitudinal and transverse and density for (PbOX(B2O31−X and (Bi2O3X(B2O31−X have been measured accurately and elastic moduli as well as hardness and Poisson’s ratio was determined. It has been demonstrated that density and ultrasonic velocities are enhanced by increasing PbO and Bi2O3 molar fraction with different values for each borate glass composition. However, the enhancement of ultrasonic velocities did not carry on continuously and after reaching a maximum point, they fell down dramatically. Both PbO and Bi2O3 showed almost similar glass improvement in case of density, ultrasonic velocity, and elastic moduli.

  14. Tribochemistry of Bismuth and Bismuth Salts for Solid Lubrication.

    Science.gov (United States)

    Gonzalez-Rodriguez, Pablo; van den Nieuwenhuijzen, Karin J H; Lette, Walter; Schipper, Dik J; Ten Elshof, Johan E

    2016-03-23

    One of the main trends in the past decades is the reduction of wastage and the replacement of toxic compounds in industrial processes. Some soft metallic particles can be used as nontoxic solid lubricants in high-temperature processes. The behavior of bismuth metal particles, bismuth sulfide (Bi2S3), bismuth sulfate (Bi2(SO4)3), and bismuth oxide (Bi2O3) as powder lubricants was studied in a range of temperatures up to 580 °C. The mechanical behavior was examined using a high-temperature pin-on-disc setup, with which the friction force between two flat-contact surfaces was recorded. The bismuth-lubricated surfaces showed low coefficients of friction (μ ≈ 0.08) below 200 °C. Above the melting temperature of the metal powder at 271 °C, a layer of bismuth oxide developed and the friction coefficient increased. Bismuth oxide showed higher friction coefficients at all temperatures. Bismuth sulfide exhibited partial oxidation upon heating but the friction coefficient decreased to μ ≈ 0.15 above 500 °C, with the formation of bismuth oxide-sulfate, while some bismuth sulfate remained. All surfaces were studied by X-ray diffraction (XRD), confocal microscopy, high-resolution scanning electron microscopy (HR-SEM), and energy-dispersive X-ray spectroscopy (EDS). This study reveals how the partial oxidation of bismuth compounds at high temperatures affects their lubrication properties, depending on the nature of the bismuth compound.

  15. Selective oxidation of propene on bismuth molybdate and mixed oxides of tin and antimony and of uranium and antimony

    International Nuclear Information System (INIS)

    Pendleton, P.; Taylor, D.

    1976-01-01

    Propene + 18 0 2 reactions have been studied in a static reaction system on bismuth molybdate and mixed oxides of tin and antimony and of uranium and antimony. The [ 16 0] acrolein content of the total acrolein formed and the proportion of 16 0 in the oxygen of the carbon dioxide by-product have been determined. The results indicate that for each catalyst the lattice is the only direct source of the oxygen in the aldehyde, and that lattice and/or gas phase oxygen is used in carbon dioxide formation. Oxygen anion mobility appears to be greater in the molybdate catalyst than in the other two. (author)

  16. Bismuth molybdate catalysts prepared by mild hydrothermal synthesis: Influence of pH on the selective oxidation of propylene

    DEFF Research Database (Denmark)

    Schuh, Kirsten; Kleist, Wolfgang; Høj, Martin

    2015-01-01

    A series of bismuth molybdate catalysts with relatively high surface area was prepared via mild hydrothermal synthesis. Variation of the pH value and Bi/Mo ratio during the synthesis allowed tuning of the crystalline Bi-Mo oxide phases, as determined by X-ray diffraction (XRD) and Raman spectrosc...

  17. Incorporation of thiosemicarbazide in Amberlite IRC-50 for separation of astatine from α-irradiated bismuth oxide

    International Nuclear Information System (INIS)

    Roy, Kamalika; Basu, S.; Ramaswami, A.; Nayak, Dalia; Lahiri, Susanta

    2004-01-01

    A chelating resin was synthesized by incorporating thiosemicarbazide into Amberlite IRC-50, a weakly acidic polymer. Astatine radionuclides produced by α-irradiating bismuth oxide were separated using the newly synthesized chelating resin. The resin showed high selectivity for astatine. The adsorbed astatine was recovered using 0.1 M EDTA at pH∼10

  18. Influence of bismuth oxide concentration on the pH level and biocompatibility of white Portland cement

    Directory of Open Access Journals (Sweden)

    Marina Angélica MARCIANO

    2014-07-01

    Full Text Available Objectives: To investigate if there is a relation between the increase of bismuth oxide and the decrease of pH levels and an intensification of toxicity in the Portland cement. Material and Methods: White Portland cement (WPC was mixed with 0, 15, 20, 30 and 50% bismuth oxide, in weight. For the pH level test, polyethylene tubes were filled with the cements and immersed in Milli-Q water for 15, 30 and 60 days. After each period, the increase of the pH level was assessed. For the biocompatibility, two polyethylene tubes filled with the cements were implanted in ninety albino rats (n=6. The analysis of the intensity of the inflammatory infiltrate was performed after 15, 30 and 60 days. The statistical analysis was performed using the Kruskal-Wallis, Dunn and Friedman tests for the pH level and the Kruskal-Wallis and Dunn tests for the biological analysis (p0.05. For the inflammatory infiltrates, no significant statistical differences were found among the groups in each period (p>0.05. The 15% WPC showed a significant decrease of the inflammatory infiltrate from 15 to 30 and 60 days (p<0.05. Conclusions: The addition of bismuth oxide into Portland cement did not affect the pH level and the biological response. The concentration of 15% of bismuth oxide resulted in significant reduction in inflammatory response in comparison with the other concentrations evaluated.

  19. Study of ternary-component bismuth molybdate catalysts by 18O2 tracer in the oxidation of propylene to acrolein

    International Nuclear Information System (INIS)

    Ueda, W.; Moro-oka, Y.; Ikawa, T.

    1981-01-01

    Participation of lattice oxide ions of ternary-component bismuth molybdate catalysts M-Bi-Mo-O (M = Ni, Co, Mg, Mn, Ca, Sr, Ba, and Pb) was investigated using the 18 O 2 tracer in the selective oxidation of propylene to acrolein. The participation of the lattice oxide ions in the oxidation is prominent on every catalyst but the extent of the participation varies significantly depending on the structure of the catalyst. Only lattice oxide ions in the bismuth molybdate phase are incorporated into the oxidized products on the catalysts (M = Ni, Co, Mg, and Mn) where M have smaller ionic radius than Bi 3+ ; catalyst particles are composed of a shell of bismuth molybdates and a core of MMoO 4 . On the other hand, whole oxide ions in the active particles are involved in the oxidation on catalysts having a scheelite-type structure (M = Ca, Sr, Ba, and Pb) where M has a comparable ionic radius to Bi 3+

  20. Laser-induced oxidation kinetics of bismuth surface microdroplets on GaAsBi studied in situ by Raman microprobe analysis.

    Science.gov (United States)

    Steele, J A; Lewis, R A

    2014-12-29

    We report the cw-laser-induced oxidation of molecular-beam-epitaxy grown GaAsBi bismuth surface microdroplets investigated in situ by micro-Raman spectroscopy under ambient conditions as a function of irradiation power and time. Our results reveal the surface droplets are high-purity crystalline bismuth and the resultant Bi2O3 transformation to be β-phase and stable at room temperature. A detailed Raman study of Bi microdroplet oxidation kinetics yields insights into the laser-induced oxidation process and offers useful real-time diagnostics. The temporal evolution of new β-Bi2O3 Raman modes is shown to be well described by Johnson-Mehl-Avrami-Kolmogorov kinetic transformation theory and while this study limits itself to the laser-induced oxidation of GaAsBi bismuth surface droplets, the results will find application within the wider context of bismuth laser-induced oxidation and direct Raman laser processing.

  1. Mixed conductivity in erbia-stabilized bismuth oxide

    NARCIS (Netherlands)

    Vinke, I.C.; Vinke, I.C.; Boukamp, Bernard A.; de Vries, K.J.; de Vries, Karel Jan; Burggraaf, Anthonie; Burggraaf, A.J.

    1992-01-01

    The mixed conducting solid solution 0.75Bi2O3−0.25Tb4O7 (BT40) was studied by impedance techniques using ionically blocking electrodes. These measurements confirmed the p-type electronic conductivity suggested in literature. In air at temperatures between 600 and 900 K the ionic transference number

  2. Electrical characterization of strontium titanate borosilicate glass ceramics system with bismuth oxide addition using impedance spectroscopy

    International Nuclear Information System (INIS)

    Thakur, O.P.; Kumar, Devendra; Parkash, Om; Pandey, Lakshman

    2003-01-01

    The ac electrical data, measured in the frequency range 0.1 kHz-1 MHz, were used to study the electrical response of strontium titanate borosilicate glass ceramic system with bismuth oxide addition. Complex plane plots from these electrical data for various glass ceramic samples reveal contributions from simultaneously operating polarization mechanisms to overall dielectric behavior. The complex modulus (M * ) representation of electrical data for various glass ceramic samples were found to be more informative. Equivalent circuit models, which represent the electrical behavior of glass ceramic samples, were determined using complex non-linear least square (CNLS) fitting. An attempt has been made to understand the dielectric behavior of various glass ceramics in terms of contributions arising from different polarization processes occurring at glassy matrix, crystalline phases, glass to crystal interface region and blocking electrodes. Glass ceramics containing SrTiO 3 and TiO 2 (rutile) phases show thermally stable dielectric behavior

  3. Optical and electrical properties of thin films of bismuth ferric oxide

    International Nuclear Information System (INIS)

    Cardona R, D.

    2014-01-01

    The bismuth ferric oxide (BFO) has caused great attention in recent years because of their multi ferric properties, making it very attractive for different technological applications. In this paper simultaneous ablation of two white (Bi and Fe 2 O 3 ) was used in a reactive atmosphere (containing oxygen) to deposit thin films of BFO. The composition of the films is changed by controlling the plasma parameters such as the average kinetic energy of the ions (E p) and the plasma density (Np). The effects caused by excess of Bi and Fe in atomic structure and the optical and electrical properties of the films BiFeO 3 in terms of plasma parameters were studied. The X-ray diffraction patterns of BFO samples with excess of bismuth above 2% at. They exhibited small changes in structure leading to improved levels of leakage currents compared to levels of the film with a stoichiometry close to BiFeO 3 composition. These samples showed a secondary phase (Bi 2 5FeO 4 0 selenite type) that led to the increase in the values of band gap and resistivity as well as the improvement of the piezoelectric properties. On the other hand, the films with iron excess showed as secondary phase compounds of iron oxide (α - γ-Fe 2 O 3 ) that caused increments in the conductivity and decrease in the values of band gap. The results are discussed in terms of the excesses of Bi and Fe which were correlated with the plasma parameters. (Author)

  4. Crystal structure and electrical properties of gadolinia doped bismuth oxide nanoceramic powders

    Energy Technology Data Exchange (ETDEWEB)

    Ar Latin-Small-Letter-Dotless-I , M. [Physics Department, Faculty of Sciences, Erciyes University, Kayseri (Turkey); Tasc Latin-Small-Letter-Dotless-I oglu, I.; Alt Latin-Small-Letter-Dotless-I ndal, S. [Physics Department, Faculty of Arts and Sciences, Gazi University, Ankara (Turkey); Uslu, I.; Aytimur, A. [Department of Chemistry Education, Gazi University, Ankara (Turkey); Karaaslan, T. [Physics Department, Faculty of Sciences, Erciyes University, Kayseri (Turkey); Kocyigit, S., E-mail: sergas_29@hotmail.com [Department of Chemistry Education, Gazi University, Ankara (Turkey)

    2012-10-15

    A novel method of fabrication of gadolinia doped bismuth oxide nanoceramic via the sol-gel technique is reported. Their thermal, structural and morphological properties are described by measurements of Differential Thermal Analysis/Thermal Gravimetry, X-ray Powder Diffraction and Scanning Electron Microscopy. The samples have stable high ion conductive face centered cubic {delta}-phase nanocrystalline structure. The electrical measurements of the nanoceramic powders were carried out in the temperature range of (689-1091 K) using 4-point probe technique. There is a transition between two distinct regions at 720 Degree-Sign C, which can be attributed to the order-disorder transition. This observation is supported by the differential thermal analysis measurements. The experimental results show that the value of conductivity increases with increasing temperature over linear parts characterized by two different activation energies. The conductivity data over whole measured temperature range were fitted to the Arrhenius equations of conductivity and it shows two linear regions with different slopes which correspond to low-temperature range (689-975 K) and high-temperature range (999-1091 K). The values of E{sub a1} and E{sub a2} were obtained from the slopes of ln {sigma}{sub DC} versus q/kT plot as 1.25 eV and 2.81 eV for low-temperature range and high-temperature range, respectively. -- Highlights: Black-Right-Pointing-Pointer Gadolinia doped bismuth oxide nanoceramic were produced via the sol-gel technique. Black-Right-Pointing-Pointer Structural characterizations were carried out by XRD and SEM techniques. Black-Right-Pointing-Pointer Thermal and electrical properties were evaluated by DTA/TG and 4-point probe. Black-Right-Pointing-Pointer Crystallite size was calculated using Scherrer equation. Black-Right-Pointing-Pointer The dislocation density, the microstrain and unit cell volume were calculated.

  5. Oxidative stability of marine phospholipids

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Nielsen, Nina Skall; Baron, Caroline Pascale

    of this study is to investigate the oxidative and hydrolytic stability of MPL. In addition, this study also investigates the effect of chemical composition of MPL and Maillard reaction (interaction between lipids oxidation products with the residue of amino acids) on MPL emulsions’ stability. Firstly, MPL were...... was further investigated through measurement of secondary volatile compounds by Solid Phase Microextraction at several time intervals. On the other hand, the Maillard reaction was investigated through the measurement of color changes and pyrrole content before and after 32 days storage. Preliminary result...

  6. Bismuth Subsalicylate

    Science.gov (United States)

    Pink Bismuth® ... Bismuth subsalicylate is used to treat diarrhea, heartburn, and upset stomach in adults and children 12 years of age and older. Bismuth subsalicylate is in a class of medications called ...

  7. Ex vivo assessment of genotoxicity and cytotoxicity in murine fibroblasts exposed to white MTA or white Portland cement with 15% bismuth oxide.

    Science.gov (United States)

    Zeferino, E G; Bueno, C E S; Oyama, L M; Ribeiro, D A

    2010-10-01

    To evaluate whether white mineral trioxide aggregate (MTA) or white Portland cement with 15% bismuth oxide were able to induce genetic damage and cellular death ex vivo. Aliquots of 1 × 10(4) murine fibroblasts were incubated at 37 °C for 3 h with MTA (white) or white Portland cement with 15% bismuth oxide, at final concentrations ranging from 10 to 1000 μg mL(-1) individually. Data of three independent repeats from the comet assay and the trypan blue exclusion test were assessed by the one-way anova followed by Tukey's test. Mineral trioxide aggregate or Portland cement containing bismuth oxide did not produce genotoxic effects with respect to the single-cell gel (comet) assay data for all concentrations evaluated. Furthermore, no cytotoxicity was observed for MTA or Portland cement. White MTA or white Portland cement containing 15% bismuth oxide were not genotoxic and cytotoxic. © 2010 International Endodontic Journal.

  8. Visible light photooxidative performance of a high-nuclearity molecular bismuth vanadium oxide cluster

    Directory of Open Access Journals (Sweden)

    Johannes Tucher

    2014-05-01

    Full Text Available The visible light photooxidative performance of a new high-nuclearity molecular bismuth vanadium oxide cluster, H3[{Bi(dmso3}4V13O40], is reported. Photocatalytic activity studies show faster reaction kinetics under anaerobic conditions, suggesting an oxygen-dependent quenching of the photoexcited cluster species. Further mechanistic analysis shows that the reaction proceeds via the intermediate formation of hydroxyl radicals which act as oxidant. Trapping experiments using ethanol as a hydroxyl radical scavenger show significantly decreased photocatalytic substrate oxidation in the presence of EtOH. Photocatalytic performance analyses using monochromatic visible light irradiation show that the quantum efficiency Φ for indigo photooxidation is strongly dependent on the irradiation wavelength, with higher quantum efficiencies being observed at shorter wavelengths (Φ395nm ca. 15%. Recycling tests show that the compound can be employed as homogeneous photooxidation catalyst multiple times without loss of catalytic activity. High turnover numbers (TON ca. 1200 and turnover frequencies up to TOF ca. 3.44 min−1 are observed, illustrating the practical applicability of the cluster species.

  9. Effect of bismuth oxide on white mineral trioxide aggregate: chemical characterization and physical properties.

    Science.gov (United States)

    Grazziotin-Soares, R; Nekoofar, M H; Davies, T E; Bafail, A; Alhaddar, E; Hübler, R; Busato, A L S; Dummer, P M H

    2014-06-01

    To assess the effect of bismuth oxide (Bi2 O3 ) on the chemical characterization and physical properties of White mineral trioxide aggregate (MTA) Angelus. Commercially available White MTA Angelus and White MTA Angelus without Bi2 O3 provided by the manufacturer especially for this study were subjected to the following tests: Rietveld X-ray diffraction analysis (XRD), energy-dispersive X-ray analysis (EDX), scanning electron microscopy (SEM), compressive strength, Vickers microhardness test and setting time. Chemical analysis data were reported descriptively, and physical properties were expressed as means and standard deviations. Data were analysed using Student's t-test and Mann-Whitney U test (P = 0.05). Calcium silicate peaks were reduced in the diffractograms of both hydrated materials. Bismuth particles were found on the surface of White MTA Angelus, and a greater amount of particles characterized as calcium hydroxide was observed by visual examination on White MTA without Bi2 O3 . The material without Bi2 O3 had the shortest final setting time (38.33 min, P = 0.002), the highest Vickers microhardness mean value (72.35 MPa, P = 0.000) and similar compressive strength results (P = 0.329) when compared with the commercially available White MTA Angelus containing Bi2 O3 . The lack of Bi2 O3 was associated with an increase in Vickers microhardness, a reduction in final setting time, absence of Bi2 O3 peaks in diffractograms, as well as a large amount of calcium and a morphology characteristic of calcium hydroxide in EDX/SEM analysis. © 2013 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  10. Synthesis of bismuth sulfide/reduced graphene oxide composites and their electrochemical properties for lithium ion batteries

    International Nuclear Information System (INIS)

    Zhang, Zhian; Zhou, Chengkun; Huang, Lei; Wang, Xiwen; Qu, Yaohui; Lai, Yanqing; Li, Jie

    2013-01-01

    Graphical abstract: The Bi 2 S 3 /reduced graphene oxide composites were synthesized by a one-pot hydrothermal route and exhibited an extraordinary capacity of 1073.1 mAh g −1 with excellent cycling stability and high rate capability as anode material of lithium ion battery. The enhancement in the electrochemical performance could be attributed to the introduction of RGO sheets that not only buffer the large volume changes during the alloy/dealloy reaction of Li and Bi, but also provide a highly conductive network for rapid electron transport in electrode during electrochemical reaction. -- Highlights: •Bi 2 S 3 /RGO composites were in situ prepared by one-pot hydrothermal route. •The Bi 2 S 3 nanoparticles are homogeneous dispersion on the RGO sheets. •Bi 2 S 3 /RGO exhibits excellent cycling stability and high rate capability. •This work will also of interest for supercapacitor and solar cells. -- Abstract: A simple one-pot hydrothermal route was developed to synthesize bismuth sulfide/reduced graphene oxide composites (Bi 2 S 3 /RGO composites) in this work. The morphology and crystalline structure of the obtained products were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high resolution transmission electron microscopy (HRTEM). The results of Raman spectra and Fourier transform infrared (FTIR) spectra demonstrated that graphite oxide (GO) sheets were in situ reduced to a certain extent. Transmission electron microscopy (TEM) observation indicated that the Bi 2 S 3 nanoparticles, with a size of 80–100 nm in length, are anchored on RGO sheets. Electrochemical tests show the Bi 2 S 3 /RGO composite exhibits an extraordinary capacity of 1073.1 mAh g −1 with excellent cycling stability and high rate capability compared to pure Bi 2 S 3 particles prepared by a similar route in the absence of GO. The enhancement in the electrochemical performance could be attributed to the introduction of RGO sheets

  11. Sol-Gel Synthesis and Characterization of Cubic Bismuth Zinc Niobium Oxide Nanopowders

    Directory of Open Access Journals (Sweden)

    Ganchimeg Perenlei

    2014-01-01

    Full Text Available Bismuth zinc niobium oxide (BZN was successfully synthesized by a diol-based sol-gel reaction utilizing metal acetate and alkoxide precursors. Thermal analysis of a liquid suspension of precursors suggests that the majority of organic precursors decompose at temperatures up to 150°C, and organic free powders form above 350°C. The experimental results indicate that a homogeneous gel is obtained at about 200°C and then converts to a mixture of intermediate oxides at 350–400°C. Finally, single-phased BZN powders are obtained between 500 and 900°C. The degree of chemical homogeneity as determined by X-ray diffraction and EDS mapping is consistent throughout the samples. Elemental analysis indicates that the atomic ratio of metals closely matches a Bi1.5ZnNb1.5O7 composition. Crystallite sizes of the BZN powders calculated from the Scherrer equation are about 33–98 nm for the samples prepared at 500–700°C, respectively. The particle and crystallite sizes increase with increased sintering temperature. The estimated band gap of the BZN nanopowders from optical analysis is about 2.60–2.75 eV at 500-600°C. The observed phase formations and measured results in this study were compared with those of previous reports.

  12. Crystal structures of a pentavalent bismuthate, SrBi2O6 and a lead bismuth oxide (Pb1/3Bi2/3O1.4

    Directory of Open Access Journals (Sweden)

    Nobuhiro Kumada

    2014-06-01

    Full Text Available The crystal structures of a pentavalent bismuthate, SrBi2O6 with the PbSb2O6-type structure and a lead bismuth oxide, (Pb1/3Bi2/3O1.4 with the fluorite-type structure were refined by using neutron diffraction data. The final R-factors were Rwp = 4.49, Rp = 3.46, RI = 4.50 and RF = 1.70% for SrBi2O6 and Rwp = 5.04, Rp = 3.93, RI = 5.47 and RF = 4.26% for (Pb1/3Bi2/3O1.4. SrBi2O6 prepared from NaBiO3·1.4H2O is the first example of the bismuthate with the PbSb2O6-type structure. The fluorite-type lead bismuth oxide, (Pb1/3Bi2/3O1.4 was obtained by heating the PbSb2O6-type lead bismuthate, PbBi2O5.9·H2O which was prepared also from NaBiO3·1.4H2O.

  13. Influence of bismuth oxide concentration on the pH level and biocompatibility of white Portland cement.

    Science.gov (United States)

    Marciano, Marina Angélica; Garcia, Roberto Brandão; Cavenago, Bruno Cavalini; Minotti, Paloma Gagliardi; Midena, Raquel Zanin; Guimarães, Bruno Martini; Ordinola-Zapata, Ronald; Duarte, Marco Antonio Hungaro

    2014-01-01

    To investigate if there is a relation between the increase of bismuth oxide and the decrease of pH levels and an intensification of toxicity in the Portland cement. White Portland cement (WPC) was mixed with 0, 15, 20, 30 and 50% bismuth oxide, in weight. For the pH level test, polyethylene tubes were filled with the cements and immersed in Milli-Q water for 15, 30 and 60 days. After each period, the increase of the pH level was assessed. For the biocompatibility, two polyethylene tubes filled with the cements were implanted in ninety albino rats (n=6). The analysis of the intensity of the inflammatory infiltrate was performed after 15, 30 and 60 days. The statistical analysis was performed using the Kruskal-Wallis, Dunn and Friedman tests for the pH level and the Kruskal-Wallis and Dunn tests for the biological analysis (p0.05). For the inflammatory infiltrates, no significant statistical differences were found among the groups in each period (p>0.05). The 15% WPC showed a significant decrease of the inflammatory infiltrate from 15 to 30 and 60 days (pPortland cement did not affect the pH level and the biological response. The concentration of 15% of bismuth oxide resulted in significant reduction in inflammatory response in comparison with the other concentrations evaluated.

  14. Bismuth oxide decorated graphene oxide nanocomposites synthesized via sonochemical assisted hydrothermal method for adsorption of cationic organic dyes.

    Science.gov (United States)

    Das, Trupti R; Patra, Santanu; Madhuri, Rashmi; Sharma, Prashant K

    2018-01-01

    Bismuth oxide decorated graphene oxide (Bi 2 O 3 @GO) nanocomposites were successfully synthesized by sonochemical method followed by hydrothermal treatment. The structural, morphology/microstructure and functional groups were investigated through X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM) and Fourier Transform Infrared (FTIR) spectroscopy, respectively. In the FESEM and TEM studies, well dispersed Bi 2 O 3 nanoparticles of size 3-5nm were found uniformly distributed throughout the surface and edges of GO sheets. The HRTEM measurements on the Bi 2 O 3 nanoparticle decorated graphene oxide shows imaged lattice spacing of 3.2Å corresponding to (111) plane of Bi 2 O 3 which confirms the successful synthesis of bismuth oxide decorated graphene oxide (Bi 2 O 3 @GO) nanocomposite. The synthesized nanocomposite was employed for adsorption and removal of cationic organic dyes like RhB from industrial wastewater. The effect of various parameters, viz., contact time, temperature, pH and amount of adsorbent on the adsorption capability as well as dye removal capacity of the adsorbent was studied in detail. Under optimized conditions, like, contact time (65min), amount of adsorbent (5mg), temperature (35°) and pH (4), the adsorption capacity of GO and Bi 2 O 3 @GO were recorded and the percentage of removal was found to be 64% and 80.7% for GO and Bi 2 O 3 @GO, respectively. The Bi 2 O 3 @GO nanocomposite shows higher adsorption capacity (320mg/g) as compare to only GO (224mg/g). The adsorption isotherm follows both the Temkin as well as Langmuir isotherm having heat of sorption 65.88 with Langmuir constant of 13.13 corresponding to the complete monolayer coverage of 387.44mg/g. The adsorption kinetics also follow, both pseudo first order and intraparticle diffusion model with adsorption capacity of 84.91mg/g and intra particle diffusion rate constant of 10.53mg/g min 1/2 for Bi 2 O 3 @GO

  15. Chemical composition, radiopacity, and biocompatibility of Portland cement with bismuth oxide.

    Science.gov (United States)

    Hwang, Yun-Chan; Lee, Song-Hee; Hwang, In-Nam; Kang, In-Chol; Kim, Min-Seok; Kim, Sun-Hun; Son, Ho-Hyun; Oh, Won-Mann

    2009-03-01

    This study compared the chemical constitution, radiopacity, and biocompatibility of Portland cement containing bismuth oxide (experimental cement) with those of Portland cement and mineral trioxide aggregate (MTA). The chemical constitution of materials was determined by scanning electron microscopy and energy-dispersive X-ray analysis. The radiopacity of the materials was determined using the ISO/6876 method. The biocompatibility of the materials was tested by MTT assay and tissue reaction. The constitution of all materials was similar. However, the Portland cement and experimental cement were more irregular and had a larger particle size than MTA. The radiopacity of the experimental cement was similar to MTA. The MTT assay revealed MTA to have slightly higher cell viability than the other materials. However, there were no statistically significant differences between the materials, with the exception of MTA at 24 h. There was no significant difference in the tissue reaction between the experimental groups. These results suggest that the experimental cement may be used as a substitute for MTA.

  16. Progress in bismuth vanadate photoanodes for use in solar water oxidation.

    Science.gov (United States)

    Park, Yiseul; McDonald, Kenneth J; Choi, Kyoung-Shin

    2013-03-21

    Harvesting energy directly from sunlight as nature accomplishes through photosynthesis is a very attractive and desirable way to solve the energy challenge. Many efforts have been made to find appropriate materials and systems that can utilize solar energy to produce chemical fuels. One of the most viable options is the construction of a photoelectrochemical cell that can reduce water to H(2) or CO(2) to carbon-based molecules. Bismuth vanadate (BiVO(4)) has recently emerged as a promising material for use as a photoanode that oxidizes water to O(2) in these cells. Significant advancement in the understanding and construction of efficient BiVO(4)-based photoanode systems has been made within a short period of time owing to various newly developed ideas and approaches. In this review, the crystal and electronic structures that are closely related to the photoelectrochemical properties of BiVO(4) are described first, and the photoelectrochemical properties and limitations of BiVO(4) are examined. Subsequently, the latest efforts toward addressing these limitations in order to improve the performances of BiVO(4)-based photoanodes are discussed. These efforts include morphology control, formation of composite structures, composition tuning, and coupling oxygen evolution catalysts. The discussions and insights provided in this review reflect the most recent approaches and directions for general photoelectrode developments and they will be directly applicable for the understanding and improvement of other photoelectrode systems.

  17. Hyaluronic acid-functionalized bismuth oxide nanoparticles for computed tomography imaging-guided radiotherapy of tumor.

    Science.gov (United States)

    Du, Fengyi; Lou, Jiaming; Jiang, Rong; Fang, Zhengzou; Zhao, Xuefen; Niu, Yuanyuan; Zou, Shenqiang; Zhang, Miaomiao; Gong, Aihua; Wu, Chaoyang

    2017-01-01

    The inherent radioresistance and inaccuracy of localization of tumors weaken the clinical implementation effectiveness of radiotherapy. To overcome these limitations, hyaluronic acid-functionalized bismuth oxide nanoparticles (HA-Bi 2 O 3 NPs) were synthesized by one-pot hydrothermal method for target-specific computed tomography (CT) imaging and radiosensitization of tumor. After functionalization with hyaluronic acid, the Bi 2 O 3 NPs possessed favorable solubility in water and excellent biocompatibility and were uptaken specifically by cancer cells overexpressing CD44 receptors. The as-prepared HA-Bi 2 O 3 NPs exhibited high X-ray attenuation efficiency and ideal radiosensitivity via synergizing X-rays to induce cell apoptosis and arrest the cell cycle in a dose-dependent manner in vitro. Remarkably, these properties offered excellent performance in active-targeting CT imaging and enhancement of radiosensitivity for inhibition of tumor growth. These findings demonstrated that HA-Bi 2 O 3 NPs as theranostic agents exhibit great promise for CT imaging-guided radiotherapy in diagnosis and treatment of tumors.

  18. Hydrothermal synthesis and crystal structure of a new lithium copper bismuth oxide, LiCuBiO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Kumada, Nobuhiro, E-mail: kumada@yamanashi.ac.jp [Center for Crystal Science and Technology, University of Yamanashi, Miyamae-cho 7-32, Kofu 400-8511 (Japan); Nakamura, Ayumi [Center for Crystal Science and Technology, University of Yamanashi, Miyamae-cho 7-32, Kofu 400-8511 (Japan); Miura, Akira [Center for Crystal Science and Technology, University of Yamanashi, Miyamae-cho 7-32, Kofu 400-8511 (Japan); Faculty of Engineering, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Takei, Takahiro [Center for Crystal Science and Technology, University of Yamanashi, Miyamae-cho 7-32, Kofu 400-8511 (Japan); Azuma, Masaki; Yamamoto, Hajime [Laboratory for Materials and Structures, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku Yokohama, Kanagawa 226-8503 (Japan); Magome, Eisuke; Moriyoshi, Chikako; Kuroiwa, Yoshihiro [Department of Physical Science, Hiroshima University, 1-3-1 Kagamiyama, Higashihiroshima, Hiroshima 739-8526 (Japan)

    2017-01-15

    A new lithium copper bismuth oxide, LiCuBiO{sub 4} was prepared by hydrothermal reaction using NaBiO{sub 3}0.1*4H{sub 2}O. The crystal structural model of this compound was refined by using synchrotron X-ray powder diffraction data. This bismuthate has the LiCuSbO{sub 4} related structure with the orthorhombic cell (Space group: Pnma) of a=10.9096(9), b=5.8113(5) and c=5.0073(4) Å, and the final R-factors were R{sub wp}=4.84 and R{sub p}=3.58%. This compound is the first example of a lithium copper bismuthate containing Bi{sup 5+}. An antiferromagnetic ordering of Cu{sup 2+} moment was observed at 6 K. - Graphical abstract: In the crystal structure of LiCuBiO{sub 4} all metal atoms are coordinated octahedrally by six O atoms and LiO{sub 6} and CuO{sub 6} octahedra form the one-dimensional chains by edge-sharing along the b-axis. The LiO{sub 6} and CuO{sub 6} chains form the layer by face-sharing in the bc plane. The Bi atoms are placed in that interlayer and BiO{sub 6} octahedra are edge-sharing with LiO{sub 6} and CuO{sub 6} octahedra. - Highlights: • A new lithium copper bismuth oxide, LiCuBiO{sub 4} is prepared by hydrothermal reaction. • The crystal structure of LiCuBiO{sub 4} is closely related with that of LiCuSbO{sub 4}. • This new compound exhibits an antiferromagnetic ordering of Cu{sup 2+} moment at 6 K.

  19. Nucleation and growth of lead oxide particles in liquid lead-bismuth eutectic.

    Science.gov (United States)

    Gladinez, Kristof; Rosseel, Kris; Lim, Jun; Marino, Alessandro; Heynderickx, Geraldine; Aerts, Alexander

    2017-10-18

    Liquid lead-bismuth eutectic (LBE) is an important candidate to become the primary coolant of future, generation IV, nuclear fast reactors and Accelerator Driven System (ADS) concepts. One of the main challenges with the use of LBE as a coolant is to avoid its oxidation which results in solid lead oxide (PbO) precipitation. The chemical equilibria governing PbO formation are well understood. However, insufficient kinetic information is currently available for the development of LBE-based nuclear technology. Here, we report the results of experiments in which the nucleation, growth and dissolution of PbO in LBE during temperature cycling are measured by monitoring dissolved oxygen using potentiometric oxygen sensors. The metastable region, above which PbO nucleation can occur, has been determined under conditions relevant for the operation of LBE cooled nuclear systems and was found to be independent of setup geometry and thus thought to be widely applicable. A kinetic model to describe formation and dissolution of PbO particles in LBE is proposed, based on Classical Nucleation Theory (CNT) combined with mass transfer limited growth and dissolution. This model can accurately predict the experimentally observed changes in oxygen concentration due to nucleation, growth and dissolution of PbO, using the effective interfacial energy of a PbO nucleus in LBE as a fitting parameter. The results are invaluable to evaluate the consequences of oxygen ingress in LBE cooled nuclear systems under normal operating and accidental conditions and form the basis for the development of cold trap technology to avoid PbO formation in the primary reactor circuit.

  20. Design of a new nanocomposite between bismuth nanoparticles and graphene oxide for development of electrochemical sensors.

    Science.gov (United States)

    Bindewald, Eduardo H; Schibelbain, Arthur F; Papi, Maurício A P; Neiva, Eduardo G C; Zarbin, Aldo J G; Bergamini, Márcio F; Marcolino-Júnior, Luiz H

    2017-10-01

    This study describes a new route for preparation of a nanocomposite between graphene oxide (GO) and bismuth nanoparticles (BiNPs) and its evaluation as modifier electrode for development of electrochemical sensors. BiNPs were synthesized under ultrasound conditions using Bi(NO 3 ) 3 as metal precursor and ascorbic acid (AA) as reducing agent/passivating. Some experimental parameters of BiNPs synthesis such as Bi 3+ :AA molar ratio and reaction time were conducted aiming the best voltammetric performance of the sensor. Glassy carbon electrodes (GCE) were modified by drop-casting with the BiNPs dispersions and anodic stripping voltammetry measurements were performed and revealed an improvement in the sensitivityfor determination of Cd(II) and Pb(II) compared to an unmodified electrode. The best electrochemical response was obtained for a BiNPs synthesis with Bi 3+ :AA molar ratio of 1:6 and reaction time of 10min, which yielded Bi metallic nanoparticles with average size of 5.4nm confirmed by XRD and TEM images, respectively. GO was produced by graphite oxidation using potassium permanganate and exfoliated with an ultrasound tip. GO-BiNPs nanocomposite was obtained by a simple mixture of GO and BiNPs dispersions in water and kept under ultrasonic bath for 1h. GCE were modified with a nanocomposite suspension containing 0.3 and 1.5mgmL -1 of GO and BiNPs in water, respectively. Under optimized conditions, the proposed nanocomposite was evaluated on the voltammetric determination of Pb (II) and Cd (II), leading to a linear response range between 0.1 and 1.4μmolL -1 for both cations, with limit of detection of 30 and 27nmolL -1 , respectively. These results indicate the great potential of the GO-BiNPs nanocomposite for improving the sensitivity of voltammetric procedures. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Thermal stabilities of electromechanical properties in cobalt-modified strontium bismuth titanate (SrBi{sub 4}Ti{sub 4}O{sub 15})

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qian; Cao, Zhao-Peng; Wang, Chun-Ming, E-mail: wangcm@sdu.edu.cn; Fu, Qing-Wei; Yin, De-Fu; Tian, Hu-He

    2016-07-25

    Bismuth layer-structured ferroelectric (BLSF) strontium bismuth titanate (SrBi{sub 4}Ti{sub 4}O{sub 15}, SBT) ceramic oxides with B-site cobalt substitutions have been synthesized using conventional solid–state reaction. The dielectric, piezoelectric, and ferroelectric properties of cobalt-modified SBT are investigated in detail. The results indicate that cobalt is very effective in promoting the piezoelectric performance of SBT. The SBT modified with 3 mol% Co{sup 3+} (SBT-3Co) exhibits the optimized piezoelectric properties, with a piezoelectric constant d{sub 33} of 28 pC/N, which is the highest value among the modified SBT-based piezoelectric ceramics ever reported. The temperature-dependent electrical impedance, resonance frequencies, and electromechanical coupling factors (k{sub p} and k{sub t}) reveal that the cobalt-modified SBT ceramics have good thermal stabilities of electromechanical properties up to 300 °C. These results demonstrate that the cobalt-modified SBT ceramics are promising materials for high temperature piezoelectric sensors applications. - Graphical abstract: The manuscript deals with the thermal stabilities of piezoelectric properties of cobalt-modified SrBi{sub 4}Ti{sub 4}O{sub 15} (SBT) ceramics. The 3 mol% Co{sup 3+} modified SBT (SBT-3Co) ceramics exhibit a piezoelectric constant d{sub 33} of 28 pC/N and a Curie temperature T{sub c} of 528 °C. The SBT-3Co ceramics have good thermal stabilities of electromechanical properties up to 300 °C. - Highlights: • A high level of piezoelectric performance (d{sub 33}∼28 pC/N)is obtained. • High Curie temperature (T{sub c}∼528 °C) is acquired for the optimal composition. • The SBT-3Co exhibits good thermal stabilities of electromechanical properties. • The Co-modified SrBi{sub 4}Ti{sub 4}O{sub 15} is promising as high temperature piezoelectric material.

  2. High temperature superconducting material: Bismuth strontium calcium copper oxide. (Latest citations from the Aerospace database). Published Search

    International Nuclear Information System (INIS)

    1993-11-01

    The bibliography contains citations concerning the development, fabrication, and analysis of a high temperature superconducting material based on bismuth-strontium-calcium-copper-oxides (Bi-Sr-Ca-Cu-O). Topics include the physical properties, structural and compositional analysis, magnetic field and pressure effects, and noble metal dopings of Bi-Sr-Ca-Cu-O based systems. The highest transition temperature recorded to date for this material was 120 degrees Kelvin. Fabrication methods and properties of Bi-Sr-Ca-Cu-O films and ceramics are also considered. (Contains 250 citations and includes a subject term index and title list.)

  3. Crystalline structure and propylene oxidation in complex bismuth-molybdenum oxide catalysts

    International Nuclear Information System (INIS)

    Manaila, R.; Ionescu, N.I.; Caldararu, M.

    1980-01-01

    Complex Bi-Mo oxide catalysts supported on amorphous SiO 2 were prepared by coprecipitation and tested in the reaction of selective oxidation of propylene to acrolein. They consist of a mixture of molybdate phases and excess MoO 3 . The Fe 2 (MoO 4 ) 3 phase was found to have a high concentration of lattice defects, induced by a Mo excess. These defects could be related to the catalytic conversion and to the selectivity to total oxidation by varying the calcination temperature. Calcination above 500 0 C induced also the transition of the metastable modification β-NiMoO 4 to the stable form α, accompanied by a loss of conversion. A complex Bi molybdate with scheelitic structure was found to have a high selectivity to acrolein. (author)

  4. Hydrogen Treatment and FeOOH overlayer: Effective approaches for enhancing the photoelectrochemical water oxidation performance of bismuth vanadate thin films

    DEFF Research Database (Denmark)

    Singh, Aadesh P.; Saini, Nishant; Mehta, Bodh R.

    2018-01-01

    The water oxidation capability of the promising photoanode bismuth vanadate (BiVO4) is hampered by poor bulk electron transport and by high rates of charge recombination at the semiconductor/electrolyte interface. Here, we demonstrate that a dual modification of BiVO4 by: (i) annealing in a hydro......The water oxidation capability of the promising photoanode bismuth vanadate (BiVO4) is hampered by poor bulk electron transport and by high rates of charge recombination at the semiconductor/electrolyte interface. Here, we demonstrate that a dual modification of BiVO4 by: (i) annealing...

  5. Enhanced piezoelectric properties and excellent thermal stabilities of cobalt-modified Aurivillius-type calcium bismuth titanate (CaBi{sub 4}Ti{sub 4}O{sub 15})

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Tian-Long [School of Physics, State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Wang, Chun-Ming, E-mail: wangcm@sdu.edu.cn [School of Physics, State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Wang, Chun-Lei; Wang, Yi-Ming [School of Physics, State Key Laboratory of Crystal Materials, Shandong University, Jinan 250100 (China); Dong, Shuxiang [Department of Materials Science and Engineering, College of Engineering, Peking University, Beijing 100871 (China)

    2015-11-15

    Highlights: • Cobalt oxide modified CBT-based ceramics were prepared and investigated in detail. • XRPD analysis revealed Co ions enter into B-site of CBT-based ceramics. • CBT-Co4 ceramics show the enhanced d{sub 33} of 14 pC/N and T{sub c} of 782 °C. • CBT-Co4 ceramics present the improved high-temperature resistivity. • Thermal depoling behavior indicates CBT-Co4 ceramics exhibit good thermal stability. - Abstract: Bismuth layer-structured ferroelectric (BLSF) calcium bismuth titanate (CaBi{sub 4}Ti{sub 4}O{sub 15}, CBT) piezoelectric ceramics with 0.0–1.0 wt.% cobalt oxide (Co{sub 2}O{sub 3}) have been prepared via a conventional solid-state reaction method. Microstructural morphology and electrical properties of cobalt oxide-modified CBT ceramics were investigated in detail. X-ray powder diffraction (XRPD) analysis revealed that the cobalt oxide-modified CBT ceramics have a pure four-layer Aurivillius-type structure. The piezoelectric properties of CBT ceramics were significantly enhanced by cobalt oxide modifications. The piezoelectric coefficient d{sub 33} and Curie temperature T{sub c} of 0.2 wt.% cobalt oxide-modified CBT ceramics (CBT-Co4) are 14 pC/N and 782 °C, respectively. The DC resistivity and thermal depoling behavior at elevated temperature indicated that the CBT-Co4 ceramics exhibit good thermal stability, demonstrating that the CBT-Co4 ceramics are potential materials for high temperature piezoelectric applications.

  6. Study of multiphasic molybdate-based catalysts. II. Synergy effect between bismuth molybdates and mixed iron and cobalt molybdates in mild oxidation of propene

    Energy Technology Data Exchange (ETDEWEB)

    Millet, J.M.M.; Ponceblanc, H.; Coudurier, G.; Vedrine, J.C. (Institut de Recherches sur la Catalyse, Villeurbanne (France)); Herrmann, J.M. (Laboratoire de Photocatalyse, Ecully (France))

    1993-08-01

    Results are reported concerning the synergy effect observed in the oxidation of propene to acrolein over bismuth and mixed iron and cobalt molybdates. The pure bismuth, iron, and cobalt molybdates and mixed cobalt and iron molybdates (solid solutions) have been prepared and individually tested as catalysts. Mechanical mixtures of these phases have been prepared and tested as catalysts. All the catalysts have been characterized before and after the catalytic reaction by several techniques such as ESR, XPS, EDX-STEM, TEM, XRD, and Moessbauer and UV spectroscopies. The synergy effect observed is tentatively explained as due to the deposition on the large bismuth molybdate particles of smaller mixed iron and cobalt molybdate particles with spreading of the bismuth molybdate over the latter particles. It is proposed that the Fe[sub x]Co[sub 1-x]MoO[sub 4] phase plays the role of the fast electron conducting material which enhances the electron mobility and the efficiency of the redox mechanism, the active and selective phase being the overlying bismuth molybdate compounds. 27 refs., 5 figs., 7 tabs.

  7. Investigation of iron-bismuth-molybdenum catalysts

    International Nuclear Information System (INIS)

    Ven'yaminov, S.A.; Barannik, G.B.; Pitaeva, A.N.; Sazonova, N.N.; Plyasova, L.M.

    1977-01-01

    The catalytic properties of an oxide iron-bismuth-molybdenum system in reactions of oxidative ammonolysis of propylene and oxidative dehydrogenation of butene-1 are investigated. It is shown that catalysts containing double molybdate of bismuth and iron (the X-phase) exhibit an increased catalytic activity as compared with bismuth molybdate (Bi 2 O 3 x3MoO 3 ). Preliminary reduction of such specimens increases their activity and selectivity in subsequent work under conditions of a stationary course of the oxidation reaction. The activity and selectivity of catalysts containing only bismuth molybdate and iron molybdate are due to the additivity of the properties of the separate molybdates

  8. Biological evaluation of bismuth non-steroidal anti-inflammatory drugs (BiNSAIDs): stability, toxicity and uptake in HCT-8 colon cancer cells.

    Science.gov (United States)

    Hawksworth, Emma L; Andrews, Philip C; Lie, Wilford; Lai, Barry; Dillon, Carolyn T

    2014-06-01

    Recent studies showed that the metal-coordinated non-steroidal anti-inflammatory drug (NSAID), copper indomethacin, reduced aberrant crypt formation in the rodent colon cancer model, while also exhibiting gastrointestinal sparing properties. In the present study, the stability and biological activity of three BiNSAIDs of the general formula [Bi(L)3]n, where L=diflunisal (difl), mefenamate (mef) or tolfenamate (tolf) were examined. NMR spectroscopy of high concentrations of BiNSAIDs (24h in cell medium, 37°C) indicated that their structural stability and interactions with cell medium components were NSAID specific. Assessment of cell viability using the [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium]bromide (MTT) assay showed that the toxicity ranking of the BiNSAIDs paralleled those of the respective free NSAIDs: diflHbismuth content was observed following treatment with [Bi(tolf)3]. Since NMR studies indicated that [Bi(tolf)3] was the most stable BiNSAID and that cellular uptake of bismuth correlated with structural stability it appears that bismuth uptake is assisted by the NSAID. Microprobe SR-XRF imaging showed that the intracellular fate of bismuth was independent of the specific BiNSAID treatment whereby all BiNSAID-treated cells showed bismuth accumulation in the cytoplasm within 24-h exposure. The size and location of the hot spots (0.3-5.8μm(2)), were consistent with cellular organelles such as lysosomes. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Piezoelectric properties and thermal stabilities of cobalt-modified potassium bismuth titanate

    International Nuclear Information System (INIS)

    Guo, Zhen-Lei; Wang, Chun-Ming; Zhao, Tian-Long; Yu, Si-Long; Cao, Zhao-Peng

    2013-01-01

    The cobalt-modified potassium bismuth titanate (K 0.5 Bi 4.5 Ti 4 O 15 , KBT) piezoelectric ceramics have been prepared using conventional solid–state reaction. X-ray diffraction analysis revealed that the cobalt-modified KBT ceramics have a pure four-layer (m = 4) Aurivillius-type structure. The dielectric, ferroelectric, and piezoelectric properties of cobalt-modified KBT ceramics were investigated in detail. The piezoelectric activities of KBT ceramics were significantly improved by the cobalt modification. The reasons for piezoelectric activities enhancement with cobalt modification were given. The piezoelectric coefficient d 33 and Curie temperature T c for the 5 mol% cobalt-modified KBT ceramics (KBT-Co5) were found to be 28 pC/N and 575 °C, respectively. The DC resistivity, frequency constants (N p and N t ), and electromechanical properties at elevated temperature were investigated, indicating the cobalt-modified KBT piezoelectric ceramics possess stable piezoelectric properties up to 500 °C. The results show the cobalt-modified KBT ceramics are potential materials for high temperature piezoelectric applications. - Highlights: • We examine the piezoelectric properties of the cobalt-modified K 0.5 Bi 4.5 Ti 4 O 15 . • A high level of piezoelectric activities (d 33 = 28 pC/N) are obtained. • High Curie temperature (T c = 575 °C) is acquired for the optimal composition. • The Co-modified K 0.5 Bi 4.5 Ti 4 O 15 is promising as high temperature materials

  10. Stabilization flyuorytopodibnoyi structure in oxide vacuum condensate

    Directory of Open Access Journals (Sweden)

    О.М. Заславський

    2006-01-01

    Full Text Available  The influence of the oxide-stabilizer content, M'-cation radius and film deposition temperature on the stabilization of the fluorite-like solid solutions in the zirconium and hafnium oxides-based vacuum condensates, obtained by Laser-evaporating method, was investigated. The optimum parameters of the coatication of the isotropic thermostable coverings was determined. This results were explained by using of the high-speed condensation in vacuum theory.

  11. Melanin-gamma rays assistants for bismuth oxide nanoparticles synthesis at room temperature for enhancing antimicrobial, and photocatalytic activity.

    Science.gov (United States)

    El-Batal, Ahmed I; El-Sayyad, Gharieb S; El-Ghamry, Abbas; Agaypi, Kerolos M; Elsayed, Mohamed A; Gobara, Mohamed

    2017-08-01

    Melanin pigment has been deemed as a natural photoprotector with strong hydrophobicity. It allured considerable compatibility with many applications in medicine, food, and nanotechnology. Penicillium chrysogenium has been devoted to the green synthesis of melanin whereby optimizing its culture and environmental conditions. The impacts of alternative economic L-tyrosine natural sources (unprecedented alternate origins) and gamma radiation were pledged for the potential growing of the pigment. Herein, notable increases in melanin yield (6.4mg/ml; much higher than nonoptimized one by 40 folds) was obtained by optimizing the culture, and environmental requirements [potato starch (3.0%), yeast extract (5.0%), copper sulfate (0.2mM), 0.25% L-tyrosine, 0.1% L-glycine, and 0.1% Tween 20 at pH5.0, and 30°C for 7.0days using 180.0rpm shaking speed]. The addition of banana's peel (2.0%) has been led to increase the melanin production up to (8.3mg/ml; much higher than optimized one by 1.29 folds). It stimulated the induced enzymes, (i.e., tyrosinase) because it contained significant amounts of L-tyrosine, dopamine, and L-DOPA as resources for melanin biosynthesis. Then irradiated P. chrysogenium (2.5kGy) induced the pigment yield to 10.3mg/ml; much higher than optimized one by (1.61 folds). On the other hand, we tailored a methodology involved the product of melanin and gamma rays (25.0kGy) to an eco-friendly synthesis of Bismuth oxide nanoparticles (BiONPs) at the room temperature. Melanin under such alkaline condition functioning as simultaneously hydrolyzes, photoprotection of the Bi seeds, and stabilizer against the uncontrolled growth and the free radicals attack. Whereas the gamma irradiation induced the room temperature condensation reaction to occur, a novel mechanism proposal was discussed. BiONPs were characterized by UV-Vis., DLS, XRD, SEM, EDX, and FTIR. DLS and XRD calculations with TEM analysis exhibited the mean diameter of BiONPs was 29.82nm. Moreover, the as

  12. Oxidative stability of krill oil (Euphausia superba)

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Jacobsen, Charlotte; Bruheim, I.

    conditions. These compounds include Strecker degradation compounds and pyrroles. Some of these compounds may have antioxidative effect. Commercial scale processing of krill prior to extraction may affect the oxidative stability of krill oil. Therefore, the main objective of this study was to compare lipid...... oxidation in krill oil produced in a commercial process and krill oil carefully extracted from frozen krill in the laboratory. Krill oil was incubated at different temperatures (20, 30 and 40 oC) for 1, 2, 3, 4 and 6 weeks, under conditions of constant stirring while being exposed to air. The oxidative......Krill oil has been reported in many studies to have high oxidative stability when evaluated by peroxide value (PV) and anisidine value (AV). However, recent studies have shown that other compounds than primary and secondary oxidation products are formed when krill oil is exposed to oxidative...

  13. Improving oxidative stability of ghee using natural oxidants from agri ...

    African Journals Online (AJOL)

    ... and PP gave good antioxidant activity during accelerated oxidative incubation of ghee. It could be concluded that ethanol extracts under study, at a concentration of 200 ppm, can retard fat auto-oxidation. Keywords: Ghee, agri industrial by-products, natural antioxidants, stability indices. African Journal of Biotechnology, ...

  14. Synergy Effects of the Mixture of Bismuth Molybdate Catalysts with SnO2/ZrO2/MgO in Selective Propene Oxidation and the Connection between Conductivity and Catalytic Activity

    DEFF Research Database (Denmark)

    Le, Minh Thang; Do, Van Hung; Truong, Duc Duc

    2016-01-01

    Bismuth molybdate catalysts have been used for partial oxidation and ammoxidation of light hydrocarbons since the 1950s. In particular, there is the synergy effect (the enhancement of the catalytic activity in the catalysts mixed from different components) in different phases of bismuth molybdate...... for the question: does the electrical conductivity influence the catalytic activity (which has been previously proposed by some authors). In this work, highly conductive materials (SnO2, ZrO2) and nonconductive materials (MgO) are added to beta bismuth molybdates (beta-Bi2Mo2O9) using mechanical mixing...... of these mixtures showed that the addition of 10% mol SnO2 to beta bismuth molybdate resulted in the highest activity while the addition of nonconductive MgO could not increase the catalytic activity. This shows that there may be a connection between conductivity and catalytic activity in the mixtures of bismuth...

  15. Evaluating X-ray absorption of nano-bismuth oxide ointment for decreasing risks associated with X-ray exposure among operating room personnel and radiology experts

    Directory of Open Access Journals (Sweden)

    M. Rashidi

    2015-12-01

      Conclusion: It seems that due to higher atomic number and lower toxicity, Bi2O3 nanoparticles have better efficiency in X-ray absorbtion, comparing to the lead. Cream and ointment of bismuth oxide nanoparticles can be used as X-ray absorbant for different professions such as physicians, dentists, radiology experts, and operating room staff and consequently increase health and safety of these employees.

  16. Investigation of gamma ray shielding efficiency and mechanical performances of concrete shields containing bismuth oxide as an environmentally friendly additive

    Science.gov (United States)

    Yao, Ya; Zhang, Xiaowen; Li, Mi; Yang, Rong; Jiang, Tianjiao; Lv, Junwen

    2016-10-01

    Concrete has a proven ability to attenuate gamma rays and neutrons without compromising structural property; therefore, it is widely used as the primary shielding material in many nuclear facilities. Recently, there is a tendency toward using various additives to enhance the shielding properties of these concrete mixtures. However, most of these additives being used either pose hygiene hazards or require special handling processes. It would be ideal if environmentally friendly additives were available for use. The bismuth oxide (Bi2O3) additive shows promise in various shielding applications due to its proven radiation attenuation ability and environmentally friendly nature. To the best of our knowledge, however, Bi2O3 has never been used in concrete mixtures. Therefore, for this research, we fabricated the Bi2O3-based concrete mixtures by adding Bi2O3 powder in the ordinary concrete mixture. Concrete mixtures with lead oxide (PbO) additives were used for comparison. Radiation shielding parameters like the linear attenuation coefficients (LAC) of all these concrete mixtures showing the effects of the Bi2O3 additions are presented. The mechanical performances of concrete mixtures incorporated with Bi2O3 additive were also investigated. It suggested that the concrete mixture containing 25% Bi2O3 powder (B5 in this study) provided the best shielding capacity and mechanical performance among other mixes. It has a significant potential for application as a structural concrete where radiological protection capability is required.

  17. Oxidization stability of atomically precise graphene nanoribbons

    Science.gov (United States)

    Ma, Chuanxu; Xiao, Zhongcan; Puretzky, Alex A.; Baddorf, Arthur P.; Lu, Wenchang; Hong, Kunlun; Bernholc, J.; Li, An-Ping

    2018-01-01

    The stability of graphene nanoribbons (GNRs) against oxidation is critical for their practical applications. Here we study both the thermal stability and the oxidation process of the ambient-exposed armchair GNRs with a width of seven carbon atoms (7-aGNR), grown on an Au(111) surface. The atomic scale evolution of the armchair edges and the zigzag ends of the aGNRs after annealing at different temperatures are revealed by using scanning tunneling microscopy, Raman spectroscopy, x-ray photoelectron spectroscopy, and first-principles calculations. We observe evidence that the zigzag ends start to be oxidized and decomposed at 180 °C, while the armchair edges are intact at 430 °C but become oxidized at 520 °C. Two different oxygen species are identified at the armchair edges, namely the hydroxyl pair and the epoxy bonding motif with one oxygen bonded to two edge carbons. These oxidization species modify the electronic properties of the pristine 7-aGNRs, with a band-gap reduction from 2.6 to 2.3 eV and 1.9 eV for the hydroxyl pair- and epoxy-terminated edges, respectively. These findings demonstrate the oxidation stability of both the zigzag and armchair edges of GNRs, and they provide an opportunity to harness the high density of edge atoms in applications such as GNR-based high-temperature oxygen sensors.

  18. Oxidative stability of fish oil blended with butter.

    Science.gov (United States)

    Shiota, M; Konishi, H; Tatsumi, K

    1999-09-01

    The oxidative stability of fish oil blended with milk products was evaluated. Oxidation of the oil blend was determined by peroxide value and rancimat test. Improved oxidative stability was observed for fish oil blended with butter. Unsalted and salted butters showed no difference in improvement of effect on oxidative stability of fish oil. No influence on oxidative stability for the fish oil was observed with butter oil, which was the oil fraction of butter. These studies suggested that the improved oxidative stability of fish oil-butter blend was due to the hydrophilic fraction of butter and that butter could improve the oxidative stability of polyunsaturated oils such as fish oil.

  19. Investigation of thermal stability and spectroscopic properties in Er3+ doped bismuth-boron-germanium glasses

    International Nuclear Information System (INIS)

    Nie Qiuhua; Lu Longjun; Dai Shixun; Xu Tiefeng; Shen Xiang; Zhang Xudong; Liang Xiaowei; Zhang Xianghua

    2007-01-01

    A series of Er 3+ -doped 50Bi 2 O 3 -(50-x)B 2 O 3 -xGeO 2 +0.5 wt% Er 2 O 3 (x=0, 5, 10, 15, 20 mol%) glasses were prepared. The thermal stability, absorption spectra, emission spectra and lifetime of the 4 I 13 / 2 level of Er 3+ ions were measured and studied. It is found that the absorption cross-section of Er 3+ , emission intensity and lifetime of the 4 I 13 / 2 level of Er 3+ increase with increasing GeO 2 content in the glass composition, while the fluorescence full-width at half-maximum (FWHM) at 1.5 μm of Er 3+ is about 79 nm in x=20 mol% glass sample under 970 nm pump. The obtained data suggest that this system glass can be used as a candidate host material for potential broadband optical amplifiers

  20. Oxidation stability and risk evaluation of biodiesel

    Directory of Open Access Journals (Sweden)

    Hoshino Takashi

    2007-01-01

    Full Text Available This review describes oxidation and thermal stability and hazardous possibility of biodiesel by auto-oxidation. As it can be distributed using today’s infrastructure biodisel production has increased especially in the European Union. Biodiesel has many surpassing properties as an automotive fuel. Biodiesel is considered safer than diesel fuel because of the high flash point, but it has oxygen and double bond(s. Fatty acid methyl esters are more sensitive to oxidative degradation than fossil diesel fuel. The ability of producing peroxides is rather high, therefore we should care of handling of biodiesel.

  1. The Relationship Between Structural and Catalytic Activity of α and γ-Bismuth-Molybdate Catalysts for Partial Oxidation of Propylene to Acrolein

    Science.gov (United States)

    Fansuri, H.; Pham, G. H.; Wibawanta, S.; Zhang, D. K.; French, David

    Bismuth-molybdate catalysts are known to be effective for catalytic partial oxidation of propylene to acrolein. Their properties and the kinetics and reaction mechanisms for acrolein production have been extensively studied, especially in their basic forms, such as α, β, and γ-bismuth-molybdate. Although the reaction mechanisms have been reported widely in the literature, a general agreement has not been reached, especially from a catalyst-structure point of view. The present contribution reports an effort to understand the structural changes of α and γ-bismuth-molybdate catalysts at varying temperatures as examined using high temperature XRD and to relate the catalyst performance (activity and selectivity) for propylene partial oxidation to acrolein. The XRD analysis was performed at temperature between 250 and 450°C in ambient atmosphere and the Rietveld refinement method was used to extract unit cell parameters. The results showed a distinct similarity between the shapes of the thermal expansion of the catalysts and their activity and selectivity curves, indicating a significant role that the catalyst interatomic structure plays in the overall reaction mechanism.

  2. Synthesis of mesoporous bismuth-impregnated aluminum oxide for arsenic removal: Adsorption mechanism study and application to a lab-scale column.

    Science.gov (United States)

    Zhu, Ningyuan; Qiao, Jun; Ye, Yanfang; Yan, Tingmei

    2018-04-01

    High mobility and toxicity of arsenic [As (III)] limit its removal from an aquatic environment and pose a threat to human health. In this work, batch adsorption experiments were conducted to investigate the adsorption capacity of bismuth-impregnated aluminum oxide (BiAl). Continuous application of As (III) removal was achieved via a lab-scale column reactor. Bismuth impregnation decreased the specific surface area of aluminum oxide and affected its pore size distribution. However, because of its abundant and well-proportioned mesoporous character, it also enhanced its adsorption capacity through the surface complexation of As (III). Batch adsorption experiments demonstrated a suitable Freundlich model and a fitted pseudo-second-kinetic model for As (III) adsorption. The main mechanism was chemisorption with both bismuth and aluminum atoms; however, physisorption also contributed to arsenic adsorption at the initial stage of the reaction. The Adams-Bohart model better described the breakthrough curves than the Thomas model. BiAl exhibited efficient As (III) adsorption over a wide pH range and could be applied to As (III) removal from wastewater. A high As (III) removal efficiency (91.6%) was obtained at an initial As (III) concentration of 5 mg L -1 at a flow rate of 1 mL min -1 . This study indicates the potential for the practical application of BiAl in As (III) removal. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Microstructure and electrical properties of bismuth and bismuth oxide deposited by magnetron sputtering UBM; Microestructura y propiedades electricas de bismuto y oxido de bismuto depositados por magnetron sputtering UBM

    Energy Technology Data Exchange (ETDEWEB)

    Otalora B, D. M.; Dussan, A. [Universidad Nacional de Colombia, Departamento de Fisica, Grupo de Materiales Nanoestructurados y sus Aplicaciones, Carrera 30 No. 45-03, 111321 Bogota (Colombia); Olaya F, J. J., E-mail: jjolayaf@unal.edu.co [Universidad Nacional de Colombia, Facultad de Ingenieria, Departamento de Ingenieria Mecanica y Mecatronica, Carrera 30 No. 45-03, 111321 Bogota (Colombia)

    2015-07-01

    In this work, bismuth (Bi) and bismuth oxide (Bi{sub 2}O{sub 3}) thin films were prepared, at room temperature, by Sputtering Unbalanced Magnetron (UBM - Unbalance Magnetron) technique under glass substrates. Microstructural and electrical properties of the samples were studied by X-ray diffraction (XRD) and System for Measuring Physical Properties - PPMS (Physical Property Measurement System). Dark resistivity of the material was measured for a temperature range between 100 and 400 K. From the XRD measurements it was observed a polycrystalline character of the Bi associated to the presence of phases above the main peak, 2θ = 26.42 grades and a growth governed by a rhombohedral structure. Crystal parameters were obtained for both compounds, Bi and Bi{sub 2}O{sub 3}. From the analysis of the spectra of the conductivity as a function of temperature, it was established that the transport mechanism that governs the region of high temperature (T>300 K) is thermally activated carriers. From conductivity measurements the activation energies were obtained of 0.0094 eV and 0.015 eV for Bi{sub 2}O{sub 3} and Bi, respectively. (Author)

  4. Bismuth oxyiodide incorporated reduced graphene oxide nanocomposite material as an efficient photocatalyst for visible light assisted degradation of organic pollutants

    Science.gov (United States)

    Vinoth, R.; Babu, S. Ganesh; Ramachandran, R.; Neppolian, B.

    2017-10-01

    Herein, Bismuth oxyiodide (BiOI) - reduced graphene oxide (rGO) photocatalysts were prepared via simple hydrothermal method. The BiOI-rGO photocatalyst exhibited high crystallinity with tetragonal phase of BiOI. In addition, the electronic interaction between rGO sheet and BiOI reduced the band-gap value from 1.86 eV of bare BiOI to 1.51 eV of BiOI-rGO (6 wt%) photocatalyst. More interestingly, the rGO showed a strong influence on tailoring the morphology of BiOI to different nanostructures with different rGO loading (wt%), which further reflected differences in the photocatalytic activity. A significant quenching in the photoluminescence intensity of rGO supported BiOI photocatalyst confirmed the effective suppression of electron-hole pair recombination. The optimized rGO (4 wt%) loaded BiOI photocatalyst significantly improved the photocatalytic activity (∼85%) towards the degradation of methyl orange (MO) dye compared to that of pristine BiOI (∼29%). Thus, around three folds enhancement in the photocatalytic activity of BiOI-rGO (4 wt%) catalyst was mainly attributed to ultrafast separation of electron-hole pairs and rapid transportation of carriers by rGO support. The superior photocatalytic activity demonstrated by this newly synthesized BiOI-rGO photocatalyst makes it's a potential candidate for environmental remediation process.

  5. Structural instability and electrical properties in epitaxial Er2O3-stabilized Bi2O3 thin films

    DEFF Research Database (Denmark)

    Sanna, Simone; Esposito, Vincenzo; Graves, Christopher R.

    2014-01-01

    Bismuth oxide based materials exhibit the highest oxygen ion conductivities, making them of great interest for use in energy conversion devices such as solid oxide fuel cells. However, these materials exhibit chemical and thermal instabilities and understanding and their stabilization...

  6. Synthesis and characterization of Bi{sub 31}Cr{sub 5}O{sub 61.5}, a new bismuth chromium oxide, potential mixed-ionic-electronic conductor for solid oxide fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Colmont, Marie; Drache, Michel; Roussel, Pascal [Universite Lille Nord de France, Unite de Catalyse et de Chimie du Solide (UCCS), CNRS UMR 8181, 59655 Villeneuve d' Ascq Cedex (France)

    2010-11-01

    Single crystals, as well as pure powder of the new bismuth chromate, Bi{sub 31}Cr{sub 5}O{sub 61.5} were synthesized by slow cooling of a mixture of Bi{sub 2}O{sub 3}-Cr{sub 2}O{sub 3} and then fully structurally characterized using X-ray diffraction. It crystallizes in the monoclinic space group P2{sub 1}/n with unit cell parameters a = 23.5794(8), b = 11.6189(4), c = 24.3629(8) A and {beta} = 108.02(1) , Z = 4. The final conventional agreement factors converged to R = 0.0540 and wR = 0.0561 for 27520 independent reflections. The +VI chromium oxidation state was proved by thermogravimetric and magnetic measurements. The structure can be described by the association of isolated CrO{sub 4} tetrahedra surrounded by 11 or 12 Bi atoms forming truncated or not cuboctahedra. The stability of both pure powder sample and pressed sintered pellets was studied at elevated temperature by X-ray diffraction and by dilatometry previously to ionic conductivity measurements done by impedance spectroscopy. (author)

  7. Bismuth, Metronidazole, and Tetracycline

    Science.gov (United States)

    Helidac® (as a kit containing Bismuth Subsalicylate, Metronidazole, Tetracycline) ... Bismuth, metronidazole, and tetracycline is used along with other ulcer medications to treat duodenal ulcers. It is ...

  8. Preparation of a Microspherical Silver-Reduced Graphene Oxide-Bismuth Vanadate Composite and Evaluation of Its Photocatalytic Activity

    Directory of Open Access Journals (Sweden)

    Mao Du

    2016-03-01

    Full Text Available A novel Ag-reduced graphene oxide (rGO-bismuth vanadate (BiVO4 (AgGB ternary composite was successfully synthesized via a one-step method. The prepared composite was characterized by X-ray diffraction (XRD, X-ray photoelectron spectroscopy (XPS, scanning electron microscopy (SEM, energy dispersive X-ray (EDX, Brunauer-Emmett-Teller (BET surface area measurement, Raman scattering spectroscopy, and ultraviolet-visible diffuse-reflection spectroscopy (UV-vis DRS. The results showed that bulk monoclinic needle-like BiVO4 and Ag nanoparticles with a diameter of approximately 40 nm formed microspheres (diameter, 5–8 μm with a uniform size distribution that could be loaded on rGO sheets to facilitate the transport of electrons photogenerated in BiVO4, thereby reducing the rate of recombination of photogenerated charge carriers in the coupled AgGB composite system. Ag nanoparticles were dispersed on the surface of the rGO sheets, which exhibited a localized surface plasmon resonance phenomenon and enhanced visible light absorption. The removal efficiency of rhodamine B dye by AgGB (80.2% was much higher than that of pure BiVO4 (51.6% and rGO-BiVO4 (58.3% under visible light irradiation. Recycle experiments showed that the AgGB composite still presented significant photocatalytic activity after five successive cycles. Finally, we propose a possible pathway and mechanism for the photocatalytic degradation of rhodamine B dye using the composite photocatalyst under visible light irradiation.

  9. Iodine Gas Trapping using Granular Porous Bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jae Hwan; Shin, Jin Myeong; Park, Jang Jin; Park, Geun Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Yim, Mansung [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    {sup 129}I is a radionuclide with a very long half-life of 1.57 Χ 10{sup 7} years and has negative health effects to the human body. Therefore, the emission of {sup 129}I into the air is closely regulated by the Environmental Protection Agency (EPA). Many methods for trapping gaseous {sup 129}I have been developed thus far, including wet scrubbing and adsorption using silver loaded zeolites. Although wet scrubbing can effectively remove iodine, it suffers from corrosion of the vessel due to high concentration of the scrubbing solution. Silver loaded zeolites also show effectiveness in capturing {sup 129}I gas, yet weak thermal stability of physisorbed iodine remains a challenge. We studied a novel and facile method to trap iodine gas using bismuth. Granular bismuth having many pores was synthesized using bismuth nitrate and polyvinyl alcohol as a bismuth precursor and pore forming agent, respectively. Reaction of iodine and our samples resulted in an iodine capturing capacity of more than 2 times that of the commercial grade silver exchanged zeolite (AgX). Granular porous bismuths synthesized using bismuth nitrate and PVA show a promising performance in capturing iodine gas. The use of bismuth in trapping {sup 129}I gas can reduce the process cost as bismuth is cheap. Further study is going on to improve the mechanical property of granular porous bismuths for their easy handling.

  10. Monte Carlo simulations of radioactive waste encapsulated by bisphenol-A polycarbonate and effect of bismuth-III oxide filler material

    Science.gov (United States)

    Özdemir, Tonguç

    2017-06-01

    Radioactive waste generated from the nuclear industry and non-power applications should carefully be treated, conditioned and disposed according to the regulations set by the competent authority(ies). Bisphenol-a polycarbonate (BPA-PC), a very widely used polymer, might be considered as a potential candidate material for low level radioactive waste encapsulation. In this work, the dose rate distribution in the radioactive waste drum (containing radioactive waste and the BPA-PC polymer matrix) was determined using Monte Carlo simulations. Moreover, the change of mechanical properties of BPA-PC was estimated and their variation within the waste drum was determined for the periods of 15, 30 and 300 years after disposal to the final disposal site. The change of the dose rate within the waste drum with different contents of bismuth-III oxide were also simulated. It was concluded that addition of bismuth-III oxide filler decreases the dose delivered to the polymeric matrix due to photoelectric effect.

  11. Evaluation of a carbon paste electrode modified with Strontium substituted bismuth and titanium oxide nanoparticles in the toxic metal chromium (VI determination potentiometric method

    Directory of Open Access Journals (Sweden)

    Atefeh Badri

    2016-09-01

    Full Text Available Strontium substituted bismuth and titanium oxide nanoparticles with aurivillius morphology synthesized by chemical co-precipitation method and were characterized using XRD. The nanopartcles were used in the composition of the carbon paste to improve conductivity and transduction of chemical signal to electrical signal. A procedure for the determination of chromium is described based on pre-concentration of the dichromate anion at a carbon paste electrode modified. A novel potentiometric Cr6+carbon paste electrode incorporating Strontium substituted bismuth and titanium oxide nanoparticles (SSBTO. Ina acetate buffer solution of pH 5, the sensor displays a rapid and linear response for Cr6+ over the concentration range 1.0×10-5 to 1.0×10-1mol L-1 M with an anionic slope of 54.8± 0.2 mV decade ’ and a detection limit of the order of0.002 /µg ml ‘. The sensor is used for determination of Cr6+ by direct monitoring of Cr6+.The average recoveries of Cr6+at concentration levels of 0.5~40 pg/ml ’is 98.3. The electrode has a short response time (<6s and can be used for at least twenty days without any considerable divergence in potentials and the working pH range was 4.5-6.5. The proposed electrode was successfully used as an indicator for potentiometric determination of Cr6+in water sample.

  12. The crystal structure of baliczunicite, Bi2O(SO4)2, a new natural bismuth oxide sulfate

    DEFF Research Database (Denmark)

    Pinto, Daniela; Garavelli, Anna; Balic Zunic, Tonci

    2015-01-01

    = 14.1754(7)Å , α = 80.082(2)o, β = 88.462(2)º, γ = 89.517(2)º, V = 1052.01(8)Å3 and Z = 6. The crystal structure consists of six independent Bi sites, six S sites and 27 O sites of which three are oxo oxygen atoms not bonded to sulfur. Bismuth and S atoms are arranged close to a eutectic pattern....... The trapezoidal Bi5O39+ ions are joined along [100] with SO42- groups by means of strong bismuth-sulphate oxygen bonds, forming infinite [100] rods with composition Bi5O3(SO4)5-. One sixth of the Bi atoms do not participate in trapezoids, but form, with additional SO42- groups, rows of composition BiSO4+, also...

  13. One-step synthesis of bismuth molybdate catalysts via flame spray pyrolysis for the selective oxidation of propylene to acrolein

    DEFF Research Database (Denmark)

    Schuh, K.; Kleist, W.; Høj, Martin

    2014-01-01

    Flame spray pyrolysis (FSP) of Bi(III)-and Mo(VI)-2-ethylhexanoate dissolved in xylene resulted in various nanocrystalline bismuth molybdate phases depending on the Bi/Mo ratio. Besides alpha-Bi2Mo3O12 and gamma-Bi2MoO6, FSP gave direct access to the metastable beta-Bi2Mo2O9 phase with high surfa...... to acrolein at temperatures relevant for industrial applications (360 degrees C)....

  14. Investigation of carrier oil stabilized iron oxide nanoparticles and its ...

    African Journals Online (AJOL)

    Iron oxide nanoparticles were synthesized by co-precipitation method. The polyunsaturated carrier oil (flaxseed oil) is used as a stabilizing agent for iron oxide nanoparticles. Kirby Bauer method was used to investigate the antibiotic sensitivity of carrier oil stabilized and uncoated SPIONs at 10 and 20 μg/L on Gram-positive ...

  15. Oxygen transport and transfer properties of erbia-stabilized bismuth oxide

    NARCIS (Netherlands)

    Vinke, I.C.; Bakiewicz, J.L.; Boukamp, Bernard A.; de Vries, K.J.; Burggraaf, A.J.

    1990-01-01

    The electrode resistances of solid solutions of 75 mol% Bi2O3−25 mol% Er2O3 with sputtered and with copressed gold gauze electrodes were compared. In contrast with literature no enhancement of the electrode process could be observed for the copressed electrodes. The measurements show an oxygen

  16. Selective Electrocatalytic Activity of Ligand Stabilized Copper Oxide Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kauffman, Douglas R; Ohodnicki, Paul R; Kail, Brian W; Matranga, Christopher

    2011-01-01

    Ligand stabilization can influence the surface chemistry of Cu oxide nanoparticles (NPs) and provide unique product distributions for electrocatalytic methanol (MeOH) oxidation and CO{sub 2} reduction reactions. Oleic acid (OA) stabilized Cu{sub 2}O and CuO NPs promote the MeOH oxidation reaction with 88% and 99.97% selective HCOH formation, respectively. Alternatively, CO{sub 2} is the only reaction product detected for bulk Cu oxides and Cu oxide NPs with no ligands or weakly interacting ligands. We also demonstrate that OA stabilized Cu oxide NPs can reduce CO{sub 2} into CO with a {approx}1.7-fold increase in CO/H{sub 2} production ratios compared to bulk Cu oxides. The OA stabilized Cu oxide NPs also show 7.6 and 9.1-fold increases in CO/H{sub 2} production ratios compared to weakly stabilized and non-stabilized Cu oxide NPs, respectively. Our data illustrates that the presence and type of surface ligand can substantially influence the catalytic product selectivity of Cu oxide NPs.

  17. Optical and electrical properties of thin films of bismuth ferric oxide; Propiedades opticas y electricas de peliculas delgadas de oxido de bismuto ferrico

    Energy Technology Data Exchange (ETDEWEB)

    Cardona R, D.

    2014-07-01

    The bismuth ferric oxide (BFO) has caused great attention in recent years because of their multi ferric properties, making it very attractive for different technological applications. In this paper simultaneous ablation of two white (Bi and Fe{sub 2}O{sub 3}) was used in a reactive atmosphere (containing oxygen) to deposit thin films of BFO. The composition of the films is changed by controlling the plasma parameters such as the average kinetic energy of the ions (E p) and the plasma density (Np). The effects caused by excess of Bi and Fe in atomic structure and the optical and electrical properties of the films BiFeO{sub 3} in terms of plasma parameters were studied. The X-ray diffraction patterns of BFO samples with excess of bismuth above 2% at. They exhibited small changes in structure leading to improved levels of leakage currents compared to levels of the film with a stoichiometry close to BiFeO{sub 3} composition. These samples showed a secondary phase (Bi{sub 2}5FeO{sub 4}0 selenite type) that led to the increase in the values of band gap and resistivity as well as the improvement of the piezoelectric properties. On the other hand, the films with iron excess showed as secondary phase compounds of iron oxide (α - γ-Fe{sub 2}O{sub 3}) that caused increments in the conductivity and decrease in the values of band gap. The results are discussed in terms of the excesses of Bi and Fe which were correlated with the plasma parameters. (Author)

  18. on the oxidation stability of lubricating oil

    African Journals Online (AJOL)

    DJFLEX

    The internal combustion engine is a model oxidator, since it contains a hydrocarbon motor oil with air under agitation at high temperatures. In addition, metals such as copper, lead, nickel, chromium and iron, used for the manufacture of the engines, are effective oxidation catalysts which increases the rate of oxidation. The.

  19. Oxidative stability and bacteriological assessment of meat from ...

    African Journals Online (AJOL)

    SERVER

    2007-12-03

    Dec 3, 2007 ... were studied as uncooked and steam-cooked, and refrigerated for up to 9 days. Oxidative stability of muscle was measured using the thiobarbituric acid test and bacteria isolates were identified and quantified. Moisture and lipid contents of muscle were not affected (P>0.05) by dietary treatments. Oxidation ...

  20. Stability of solid oxide fuel cell materials

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, T.R.; Bates, J.L.; Chick, L.A. [Pacific Northwest Lab., Richland, WA (United States)

    1996-04-01

    Interconnection materials in a solid oxide fuel cell are exposed to both highly oxidizing conditions at the cathode and to highly reducing conditions at the anode. The thermal expansion characteristics of substituted lanthanum and yttrium chromite interconnect materials were evaluated by dilatometry as a function of oxygen partial pressures from 1 atm to 10{sup -18} atm, controlled using a carbon dioxide/hydrogen buffer.

  1. Methodology for the effective stabilization of tin-oxide-based oxidation/reduction catalysts

    Science.gov (United States)

    Jordan, Jeffrey D. (Inventor); Schryer, David R. (Inventor); Davis, Patricia P. (Inventor); Leighty, Bradley D. (Inventor); Watkins, Anthony N. (Inventor); Schryer, Jacqueline L. (Inventor); Oglesby, Donald M. (Inventor); Gulati, Suresh T. (Inventor); Summers, Jerry C. (Inventor)

    2011-01-01

    The invention described herein involves a novel approach to the production of oxidation/reduction catalytic systems. The present invention serves to stabilize the tin oxide reducible metal-oxide coating by co-incorporating at least another metal-oxide species, such as zirconium. In one embodiment, a third metal-oxide species is incorporated, selected from the group consisting of cerium, lanthanum, hafnium, and ruthenium. The incorporation of the additional metal oxide components serves to stabilize the active tin-oxide layer in the catalytic process during high-temperature operation in a reducing environment (e.g., automobile exhaust). Moreover, the additional metal oxides are active components due to their oxygen-retention capabilities. Together, these features provide a mechanism to extend the range of operation of the tin-oxide-based catalyst system for automotive applications, while maintaining the existing advantages.

  2. Oxidative stability of fatty acid alkyl esters: a review.

    Directory of Open Access Journals (Sweden)

    Michal Angelovič

    2015-12-01

    Full Text Available The purpose of this study was to investigate and to process the current literary knowledge of the physico-chemical properties of vegetable oil raw used for biodiesel production in terms of its qualitative stability. An object of investigation was oxidative stability of biodiesel. In the study, we focused on the qualitative physico-chemical properties of vegetable oils used for biodiesel production, oxidative degradation and its mechanisms, oxidation of lipids, mechanisms of autooxidation, effectivennes of different synthetic antioxidants in relation to oxidative stability of biodiesel and methods of oxidative stability determination. Knowledge of the physical and chemical properties of vegetable oil as raw material and the factors affecting these properties is critical for the production of quality biodiesel and its sustainability. According to the source of oilseed, variations in the chemical composition of the vegetable oil are expressed by variations in the molar ratio among different fatty acids in the structure. The relative ratio of fatty acids present in the raw material is kept relatively constant after the transesterification reaction. The quality of biodiesel physico-chemical properties is influenced by the chain length and the level of unsaturation of the produced fatty acid alkyl esters. A biodiesel is thermodynamically stable. Its instability primarily occurs from contact of oxygen present in the ambient air that is referred to as oxidative instability. For biodiesel is oxidation stability a general term. It is necessary to distinguish ‘storage stability' and ‘thermal stability', in relation to oxidative degradation, which may occur during extended periods of storage, transportation and end use. Fuel instability problems can be of two related types, short-term oxidative instability and long-term storage instability. Storage instability is defined in terms of solid formation, which can plug nozzles, filters, and degrade engine

  3. Stabilization and functionalization of iron oxide nanoparticles for biomedical applications

    Science.gov (United States)

    Amstad, Esther; Textor, Marcus; Reimhult, Erik

    2011-07-01

    Superparamagnetic iron oxide nanoparticles (NPs) are used in a rapidly expanding number of research and practical applications in the biomedical field, including magnetic cell labeling separation and tracking, for therapeutic purposes in hyperthermia and drug delivery, and for diagnostic purposes, e.g., as contrast agents for magnetic resonance imaging. These applications require good NP stability at physiological conditions, close control over NP size and controlled surface presentation of functionalities. This review is focused on different aspects of the stability of superparamagnetic iron oxide NPs, from its practical definition to its implementation by molecular design of the dispersant shell around the iron oxide core and further on to its influence on the magnetic properties of the superparamagnetic iron oxide NPs. Special attention is given to the selection of molecular anchors for the dispersant shell, because of their importance to ensure colloidal and functional stability of sterically stabilized superparamagnetic iron oxide NPs. We further detail how dispersants have been optimized to gain close control over iron oxide NP stability, size and functionalities by independently considering the influences of anchors and the attached sterically repulsive polymer brushes. A critical evaluation of different strategies to stabilize and functionalize core-shell superparamagnetic iron oxide NPs as well as a brief introduction to characterization methods to compare those strategies is given.Superparamagnetic iron oxide nanoparticles (NPs) are used in a rapidly expanding number of research and practical applications in the biomedical field, including magnetic cell labeling separation and tracking, for therapeutic purposes in hyperthermia and drug delivery, and for diagnostic purposes, e.g., as contrast agents for magnetic resonance imaging. These applications require good NP stability at physiological conditions, close control over NP size and controlled surface

  4. Iron oxide nanoparticles stabilized inside highly ordered ...

    Indian Academy of Sciences (India)

    Nanosized iron oxide, a moderately large band-gap semiconductor and an essential component of optoelectrical and magnetic devices, has been prepared successfully inside the restricted internal pores of mesoporous silica material through in-situ reduction during impregnation. The samples were characterized by ...

  5. Iron oxide nanoparticles stabilized inside highly ordered ...

    Indian Academy of Sciences (India)

    Abstract. Nanosized iron oxide, a moderately large band-gap semiconductor and an essential component of optoelectrical and magnetic devices, has been prepared success- fully inside the restricted internal pores of mesoporous silica material through in-situ reduction during impregnation. The samples were characterized ...

  6. Improved description of metal oxide stability

    DEFF Research Database (Denmark)

    Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

    2015-01-01

    transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed......The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

  7. Effects of simvastain and enamel matrix derivative on Portland cement with bismuth oxide-induced growth and odontoblastic differentiation in human dental pulp cells.

    Science.gov (United States)

    Lee, So-Youn; Min, Kyung-San; Choi, Gi-Woon; Park, Jae-Hong; Park, Sang-Hyuk; Lee, Sang-Im; Kim, Eun-Cheol

    2012-03-01

    We previously reported that bismuth oxide containing Portland cement (BPC) showed similar biocompatibility to Portland cement (PC) in periodontal ligament cells. However, the bioactivity of simvastatin and Emdogain (Biora AB, Malmö, Sweden) on BPC was not reported. The aim of this study was to evaluate the effects of simvastatin and Emdogain on BPC compared with mineral trioxide aggregate (MTA) in human dental pulp cells (HDPCs). Cell growth was determined by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium-bromide (MTT) assay. Differentiation was evaluated by alkaline phosphatase (ALP) activity, alizarin red staining, and reverse-transcriptase polymerase chain reaction. The cell growth of HDPCs exposed to Emdogain and simvastatin plus BPC was superior to those administered BPC alone and similar to those that received MTA for 14 days. The simvastatin and Emdogain groups increased the odontogenic potential of the BPC group with respect to ALP activity, mineralization nodules, messenger RNA expression of ALP, osteopontin, osteocalcin, Runx2, and osterix. These results suggest that simvastatin and Emdogain improved cell growth and the differentiation of the BPC group in HDPCs and may be useful ingredients in BPC as pulp-capping material. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  8. Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 °C

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Marion, E-mail: marion.roy@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Martinelli, Laure, E-mail: laure.martinelli@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Ginestar, Kevin, E-mail: kevin.ginestar@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Favergeon, Jérôme, E-mail: jerome.favergeon@utc.fr [Laboratoire Roberval, UMR 7337, Université de Technologie de Compiègne, Centre de Recherche de Royallieu, CS 60319, 60203 Compiègne Cedex (France); Moulin, Gérard [Laboratoire Roberval, UMR 7337, Université de Technologie de Compiègne, Centre de Recherche de Royallieu, CS 60319, 60203 Compiègne Cedex (France)

    2016-01-15

    Ten austenitic steels and Ni rich alloys were tested in static lead-bismuth eutectic (LBE) at 520 °C in order to obtain a selection of austenitic steels having promising corrosion behaviour in LBE. A test of 1850 h was carried out with a dissolved oxygen concentration between 10{sup −9} and 5 10{sup −4} g kg{sup −1}. The combination of thermodynamic of the studied system and literature results leads to the determination of an expression of the dissolved oxygen content in LBE as a function of temperature: RT(K)ln[O](wt%) = −57584/T(K) −55.876T(K) + 254546 (R is the gas constant in J mol{sup −1} K{sup −1}). This relation can be considered as a threshold of oxygen content above which only oxidation is observed on the AISI 316L and AISI 304L austenitic alloys in static LBE between 400 °C and 600 °C. The oxygen content during the test leads to both dissolution and oxidation of the samples during the first 190 h and leads to pure oxidation for the rest of the test. Results of mixed oxidation and dissolution test showed that only four types of corrosion behaviour were observed: usual austenitic steels and Ni rich alloys behaviour including the reference alloy 17Cr-12Ni-2.5Mo (AISI 316LN), the 20Cr-31Ni alloy one, the Si containing alloy one and the Al containing alloy one. According to the proposed criteria of oxidation and dissolution kinetics, silicon rich alloys and aluminum rich alloy presented a promising corrosion behaviour. - Highlights: • 10 austenitic steels and Ni rich alloys were tested in LBE at 520 °C with dissolved oxygen content between 10{sup -9} and 5 10{sup -4} wt%. • It is shown that only thermodynamics cannot explain the Ni rich alloys corrosion behaviour in LBE. • The role of oxygen on corrosion behaviour in LBE was highlighted. • An equilibrium line was defined above which only oxidation has occurred on 316L: RTln[O](wt%) = -57584/T(K)-55.876T(K)+254546. • 18Cr-15Ni-3.7Si, 21Cr-11Ni-1.6Si and 14Cr-25Ni-3.5Al

  9. Investigation of Oxidation stability of Pongamia Biodiesel and its blends

    Directory of Open Access Journals (Sweden)

    Gaurav Dwivedi

    2016-03-01

    Full Text Available Biodiesel from Pongamia oil is one of the promising non edible sources in India. But the main problem of using Pongamia biodiesel as fuel is its poor stability characteristics. Poor stability leads to gum formation which further leads to a storage problem of these fuels for a longer period of time. This paper investigates the methodology of improving the stability characteristics of Pongamia biodiesel by blending with diesel and use of the antioxidant Pyrogallol. The experimental investigation shows that blending with diesel and using of antioxidant Pyrogallol improves the stability characteristics of Pongamia biodiesel significantly. Results of the study show that the optimum amount of antioxidant (PY for pure PB20 is 300 ppm to maintain the oxidation stability specification and blending of diesel with Pongamia shows that PB10 requires no additive to maintain its stability characteristics.

  10. Oxidative stability of diacylglycerol oil and butter blends containing diacylglycerols

    DEFF Research Database (Denmark)

    Kristensen, Janni Brogaard; Nielsen, Nina Skall; Jacobsen, Charlotte

    2006-01-01

    Diacylglycerol (DAG) oils produced from sunflower oil and traditional sunflower oil were stored for 20 wk at 38 degrees C, and their oxidative stability was measured. Moreover, two butter blends were produced containing 40 wt-% DAG oil made from sunflower oil or rapeseed oil, respectively, as well...... as two control butter blends with sunflower oil or rapeseed oil. Their oxidative stability during storage at 5 degrees C for up to 12 wk was examined by similar means as for the pure oils. The storage study of the oils indicated that the DAG oil was oxidatively less stable as compared to sunflower oil......, but that they had similar sensory quality. Storage of the butter blends revealed that blends with the two types of rapeseed oil (triacylglycerol (TAG) or DAG oil) were oxidatively more stable than the blends containing oils from sunflower. There was no unambiguous indication of DAG butter blends having a different...

  11. Fermi level stabilization energy in cadmium oxide

    Energy Technology Data Exchange (ETDEWEB)

    Speaks, D. T.; Mayer, M. A.; Yu, K. M.; Mao, S. S.; Haller, E. E.; Walukiewicz, W.

    2010-04-08

    We have studied the effects of high concentrations of native point defects on the electrical and optical properties of CdO. The defects were introduced by irradiation with high energy He+, Ne+, Ar+ and C+ ions. Increasing the irradiation damage with particles heavier than He+ increases the electron concentration until a saturation level of 5x1020 cm-3 is reached. In contrast, due to the ionic character and hence strong dynamic annealing of CdO, irradiation with much lighter He+ stabilizes the electron concentration at a much lower level of 1.7x1020 cm-3. A large shift of the optical absorption edge with increasing electron concentration in irradiated samples is explained by the Burstein-Moss shift corrected for electron-electron and electron-ion interactions. The saturation of the electron concentration and the optical absorption edge energy are consistent with a defect induced stabilization of the Fermi energy at 1 eV above the conduction band edge. The result is in a good agreement with previously determined Fermi level pinning energies on CdO surfaces. The results indicate that CdO shares many similarities with InN, as both materials exhibit extremely large electron affinities and an unprecedented propensity for n-type conductivity.

  12. Improvement of the oxidation stability of cobalt nanoparticles

    Directory of Open Access Journals (Sweden)

    Celin Dobbrow

    2012-01-01

    Full Text Available In order to enhance the resistance of cobalt nanoparticles to oxidation in air, the impact of different stabilization strategies on the isothermal oxidation of particle dispersions and powders was kinetically investigated and compared to as-prepared particle preparations. A post-synthesis treatment with different alcohols was employed, and we also investigate the influence of two different polymer shells on the oxidation process. We found a parabolic decrease of the magnetization for all particle charges, indicating that the process is dominated by a diffusion of oxygen to the cobalt core and a radial growth of the oxide layer from the particle surface to the core. A significant deceleration of the oxidation process was observed for all alcohol-passivated particle preparations, and this resulted finally in a stagnation effect. The stabilizing effect increases in the sequence Co@OA/MeOH < Co@OA/EtOH < Co@OA/iPrOH. For polymer-coated particle preparations Co@PCL and Co@PS, the deceleration was even more pronounced. The results demonstrate that cobalt nanoparticles can effectively be protected against oxidation in order to improve their mid- to longterm stability.

  13. Structure-activity relationships of carbon-supported platinum-bismuth and platinum-antimony oxidation catalysts

    CSIR Research Space (South Africa)

    Maphoru, MV

    2017-04-01

    Full Text Available Compositional and morphological studies on supported platinum are important for the improvement and expanded use of catalysts for oxidative coupling reactions. Nanocomposites consisting of 5% Pt supported on activated carbon and promoted with 5% Bi...

  14. Oxidative stability of fish oil enriched drinking yoghurt

    DEFF Research Database (Denmark)

    Nielsen, Nina Skall; Debnath, D.; Jacobsen, Charlotte

    2007-01-01

    The oxidative stability of fish oil enriched drinking yoghurt as well as the antioxidative effect of citric acid ester, vitamin K and disodium ethylenediaminetetraacetic acid (EDTA) were investigated by measuring peroxide value and volatile secondary oxidation products and by sensory analysis....... No oxidation was observed in yoghurt stored at 2 [degree sign]C for up to 19 days, with or without addition of citric acid ester. Fish oil enriched yoghurt was also very stable even when compared to yoghurt with added rapeseed oil or a mixture of rapeseed oil and fish oil stored for up to 29 days. The addition...

  15. Nitrous oxide emissions affected by biochar and nitrogen stabilizers

    Science.gov (United States)

    Both biochar and N fertilizer stabilizers (N transformation inhibitors) are potential strategies to reduce nitrous oxide (N2O) emissions from fertilization, but the mechanisms and/or N transformation processes affecting the N dynamics are not fully understood. This research investigated N2O emission...

  16. Oxidative stability of pullulan electrospun fibers containing fish oil

    DEFF Research Database (Denmark)

    García Moreno, Pedro Jesús; Damberg, Cecilie; Chronakis, Ioannis S.

    2017-01-01

    stability of fibers loaded with 10wt% fish oil (EE=88.5±0.7%) was significantly improved when adding δ-tocopherol (500ppm) and rosemary extract (500ppm) as antioxidants. However, higher concentration of antioxidants (2000ppm δ-tocopherol and 1000ppm rosemary extract) did not further improve the oxidative...... for fibers without and with antioxidants (500ppm of δ-tocopherol and 500ppm of rosemary extract). Practical applications: Encapsulation of omega-3 polyunsaturated fatty acids and addition of antioxidants are the most efficient strategies to protect these lipids against oxidation when incorporating them...... into food matrices. These results show the feasibility to encapsulate fish oil in pullulan ultra-thin fibers and to improve their oxidative stability by adding natural antioxidants such as δ-tocopherol and rosemary extract. Therefore, this study might open up new opportunities for further technological...

  17. Modified silver nanowire transparent electrodes with exceptional stability against oxidation

    International Nuclear Information System (INIS)

    Idier, J; Neri, W; Ly, I; Poulin, P; Backov, R; Labrugère, C

    2016-01-01

    We report an easy method to prepare thin, flexible and transparent electrodes that show enhanced inertness toward oxidation using modified silver nanowires (Ag NWs). Stabilization is achieved through the adsorption of triphenylphosphine (PPh 3 ) onto the Ag NW hybrid dispersions prior to their 2D organization as transparent electrodes on polyethylene terephtalate (PET) films. After 110 days in air (20 °C) under atmospheric conditions, the transmittance of the PET/Ag NW/PPh 3 based films is nearly unchanged, while the transmittance of the PET/Ag NW-based films decreases by about 5%. The sheet resistance increases for both materials as time elapses, but the rate of increase is more than four times slower for films stabilized by PPh 3 . The improved transmittance and conductivity results in a significantly enhanced stability for the figure of merit σ dc /σ op . This phenomenon is highlighted in highly oxidative nitric acid vapor. The tested stabilized films in such conditions exhibit a decrease to σ dc /σ op of only 38% after 75 min, whereas conventional materials exhibit a relative loss of 71%. In addition, by contrast to other classes of stabilizers, such as polymer or graphene-based encapsulants, PPh 3 does not alter the transparency or conductivity of the modified films. While the present films are made by membrane filtration, the stabilization method could be implemented directly in other liquid processes, including industrially scalable ones. (paper)

  18. Refining method for bismuth nitrate

    International Nuclear Information System (INIS)

    Shibata, Shigeyuki.

    1997-01-01

    The present invention concerns a method of separating and removing α ray emitting nuclides present in an aqueous solution of bismuth nitrate by an industrially convenient method. A nitric acid concentration in the aqueous solution of bismuth nitrate in which α ray emitting nuclides are dissolved is lowered to coprecipitate the bismuth oxynitrate and the α ray emitting nuclides. The coprecipitation materials are separated from the aqueous solution of bismuth nitrate to separate the α ray emitting nuclides dissolved in the aqueous solution of bismuth nitrate thereby refining the aqueous solution of bismuth nitrate. (T.M.)

  19. Long-Term Stability of Oxide Nanowire Sensors via Heavily Doped Oxide Contact.

    Science.gov (United States)

    Zeng, Hao; Takahashi, Tsunaki; Kanai, Masaki; Zhang, Guozhu; He, Yong; Nagashima, Kazuki; Yanagida, Takeshi

    2017-12-22

    Long-term stability of a chemical sensor is an essential quality for long-term collection of data related to exhaled breath, environmental air, and other sources in the Internet of things (IoT) era. Although an oxide nanowire sensor has shown great potential as a chemical sensor, the long-term stability of sensitivity has not been realized yet due to electrical degradation under harsh sensing conditions. Here, we report a rational concept to accomplish long-term electrical stability of metal oxide nanowire sensors via introduction of a heavily doped metal oxide contact layer. Antimony-doped SnO 2 (ATO) contacts on SnO 2 nanowires show much more stable and lower electrical contact resistance than conventional Ti contacts for high temperature (200 °C) conditions, which are required to operate chemical sensors. The stable and low contact resistance of ATO was confirmed for at least 1960 h under 200 °C in open air. This heavily doped oxide contact enables us to realize the long-term stability of SnO 2 nanowire sensors while maintaining the sensitivity for both NO 2 gas and light (photo) detections. The applicability of our method is confirmed for sensors on a flexible polyethylene naphthalate (PEN) substrate. Since the proposed fundamental concept can be applied to various oxide nanostructures, it will give a foundation for designing long-term stable oxide nanomaterial-based IoT sensors.

  20. Improving oxidative stability of liquid fish oil supplements for pets

    DEFF Research Database (Denmark)

    Thomsen, Birgitte Raagaard; Griinari, Mikko; Jacobsen, Charlotte

    2017-01-01

    of fish oil by adding vegetable oils, mixed tocopherols and rosemary extract, and to formulate a commercial product according to the results obtained. The formulated product was evaluated against commercial fish oil products. An initial screening for antioxidative effect was performed by using Oxipres...... equipment. The effect of antioxidant and vegetable oil blends was examined in oils stored at 30 and 40°C by measuring peroxide value, volatile compounds with GC-MS and tocopherol content. Addition of vegetable oil and rosemary extract at high level (4000–6000 ppm) plus 600 ppm of mixed tocopherols increased...... oxidative stability to the same extent as 2000 ppm mixed tocopherols in Oxipres. Overall, oxidative stability of fish oil or fish oil + vegetable oil blends was improved the most by addition of 5000 ppm rosemary extract and 500 ppm mixed tocopherols. A commercial oil blend with composition optimized based...

  1. Oxidative enzymatic gelation of sugar beet pectin for emulsion stabilization

    DEFF Research Database (Denmark)

    Abang Zaidel, Dayang Norulfairuz; Meyer, Anne S.

    2013-01-01

    Pectin from sugar beet is derived from the sugar beet pulp residue which results when sugar beets are processed for sucrose extraction. The sugar beet pectin has poor gelationability by the classic divalentcation molecular mechanism because of a relatively high acetylation degree and short...... polygalacturonate backbone chain length. However, due to the feruloyl-substitutions on the side chains, the sugar beet pectic polysaccharides can be cross-linked via enzyme catalyzed oxidation. The enzyme kinetics and functionality of such oxidativelycross-linked sugar beet pectin, in relation to stabilizing...... emulsions has recently been investigated in model food emulsions. This paper reviews the pectin chemistry, enzymatic oxidative gelation mechanisms, interaction mechanisms of the sugar beet pectin with the emulsion droplets and explores how the gelation affects the rheology and stability of emulsion systems...

  2. Investigating phosphonate monolayer stability on ALD oxide surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Branch, Brittany [Nanoscience and Microsystems Engineering and Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, NM 87131 (United States); Dubey, Manish [Lujan Center, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Anderson, Aaron S. [Physical Chemistry and Applied Spectroscopy, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Artyushkova, Kateryna [Nanoscience and Microsystems Engineering and Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, NM 87131 (United States); Baldwin, J. Kevin [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Petsev, Dimiter [Nanoscience and Microsystems Engineering and Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, NM 87131 (United States); Dattelbaum, Andrew M., E-mail: amdattel@lanl.gov [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2014-01-01

    We report a series of studies aimed at investigating the stability of phosphonate self-assembled monolayers (SAMs) made from octadecylphosphonic acid (ODPA) or a perfluorinated phosphonic acid (PFPA) on hafnium and aluminum oxide surfaces deposited by atomic layer deposition (ALD). The monolayers were deposited by a series of techniques including self-assembly from solution, tethering by aggregation and growth, and the Langmuir–Blodgett (LB) method. SAMs prepared by LB method were primarily used in our stability investigations because they were found to be the most uniform and reproducible. All films deposited on ALD oxide-coated substrates were characterized by means of water contact angle measurements, spectroscopic ellipsometry, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). XPS data conclusively showed covalent phosphonate formation on both substrates. SAMs formed on both Al{sub 2}O{sub 3} and HfO{sub 2} were stable upon exposure to water. PFPA SAMs on HfO{sub 2} were found to be the most stable SAMs studied here in either water or phosphate buffer (PBS) at room temperature. We also show that similar silane-based SAMs made from octadecyltrichlorosilane (OTS) on silicon oxide (SiO{sub 2}) are less stable in PBS than phosphonate SAMs on atomic layer deposited HfO{sub 2} substrates. These data suggest that phosphonate SAMs should be considered for use in (bio)molecular sensing and actuator devices that utilize ALD and require longer-term stability under aqueous conditions.

  3. Synergy effects between bismuth molybdate catalyst phases (Bi/Mo from 0.57 to 2) for the selective oxidation of propylene to arcrolein

    DEFF Research Database (Denmark)

    Le, Minh Thang; Well, Willy van; Stoltze, Per

    2005-01-01

    In this work, the synergy effect between different phases of bismuth molybdate catalysts was investigated systematically. The catalysts were prepared by spray drying and had a Bi/Mo atomic between 0.57 and 2. It is found that the synergy effect is only observed in mixtures containing γ...

  4. Stability study: Transparent conducting oxides in chemically reactive plasmas

    Science.gov (United States)

    Manjunatha, Krishna Nama; Paul, Shashi

    2017-12-01

    Effect of plasma treatment on transparent conductive oxides (TCOs) including indium-doped tin oxide (ITO), fluorine-doped tin oxide (FTO) and aluminium-doped zinc oxide (AZO) are discussed. Stability of electrical and optical properties of TCOs, when exposed to plasma species generated from gases such as hydrogen and silane, are studied extensively. ITO and FTO thin films are unstable and reduce to their counterparts such as Indium and Tin when subjected to plasma. On the other hand, AZO is not only stable but also shows superior electrical and optical properties. The stability of AZO makes it suitable for electronic applications, such as solar cells and transistors that are fabricated under plasma environment. TCOs exposed to plasma with different fabrication parameters are used in the fabrication of silicon nanowire solar cells. The performance of solar cells, which is mired by the plasma, fabricated on ITO and FTO is discussed with respect to plasma exposure parameters while showing the advantages of using chemically stable AZO as an ideal TCO for solar cells. Additionally, in-situ diagnostic tool (optical emission spectroscopy) is used to monitor the deposition process and damage caused to TCOs.

  5. Formation of bismuth oxide nanowires by simultaneous templating and electrochemical adhesion of DNA on Si/SiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Michael G. [School of Chemistry, Newcastle University, Newcastle upon Tyne, NE1 7RU (United Kingdom); Little, Ross; Salem, Mohamed Ali [School of Chemical Engineering and Advanced Materials, Newcastle University, Newcastle upon Tyne, NE1 7RU (United Kingdom); Hedley, Joseph H.; Horrocks, Benjamin R. [School of Chemistry, Newcastle University, Newcastle upon Tyne, NE1 7RU (United Kingdom); Siller, Lidija, E-mail: Lidija.Siller@ncl.ac.uk [School of Chemical Engineering and Advanced Materials, Newcastle University, Newcastle upon Tyne, NE1 7RU (United Kingdom)

    2012-10-01

    Deoxyribonucleic acid (DNA)-templated growth of Bi/Bi{sub 2}O{sub 3} nanowires attached to the Si surface was obtained by electrochemical reduction of Bi(III) at an n-type Si electrode in aqueous Bi(NO{sub 3}){sub 3}/HNO{sub 3} at pH 2.5 with calf thymus DNA. The nanowires had a mean diameter of 5 nm and a range of lengths from 1.4 {mu}m to 6.1 {mu}m. The composition and structure of the wires were determined by atomic force microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and X-ray photoemission spectroscopy. The dominant component of the material is Bi{sub 2}O{sub 3} owing to the rapid re-oxidation of nanoscale Bi in the presence of air and water. Our method has the potential to construct complex architectures of Bi/Bi{sub 2}O{sub 3} nanostrucures on high quality Si substrates. - Highlights: Black-Right-Pointing-Pointer We have developed an electrochemical method to grow Bi/Bi{sub 2}O{sub 3} nanowires on silicon. Black-Right-Pointing-Pointer Bi/Bi{sub 2}O{sub 3} nanowires are templated by deoxyribonucleic acid molecules. Black-Right-Pointing-Pointer The procedure also adheres the nanowires to the electrode for characterization.

  6. Synthesis of bismuth (III oxide films based anodes for electrochemical degradation of reactive blue 19 and crystal violet

    Directory of Open Access Journals (Sweden)

    Petrović Milica M.

    2014-01-01

    Full Text Available The Bi2O3 films-based anodes were synthesized by electrodeposition of Bi on stainless steel substrate at constant current density and during different deposition times, fallowed by calcination, forming Bi2O3. The thickness of the films was determined by two methods: the observation under the microscope and by calculation from mass difference. Electrochemical proceses at the anodes were ivestigated by linear sweep voltammetry. At the anodes obtained within 2, 5, 10 and 15 minutes of deposition, two dyes, namely: Reactive Blue 19 and Crystal Violet, were decolorized by oxidation with •OH radical, generated from H2O2 decomposition at the anodes. Decoloration times of the anodes varied, and the shortest one was achieved with the anode obtained during 5 minutes of deposition, with the film thickness of 2.5±0.3 μm. The optimal H2O2 concentration for the dyes degradation was found to be 10 mmol dm-3. [Projekat Ministarstva nauke Republike Srbije, br. ТR 34008

  7. Physical and Oxidative Stability of Fish Oil-In-Water Emulsions Stabilized with Fish Protein Hydrolysates

    DEFF Research Database (Denmark)

    García Moreno, Pedro Jesús; Guadix, Antonio; Guadix, Emilia M.

    2016-01-01

    The emulsifying and antioxidant properties of fish protein hydrolysates (FPH) for the physical and oxidative stabilization of 5% (by weight) fish oil-in-water emulsions were investigated. Muscle proteins from sardine (Sardina pilchardus) and small-spotted catshark (Scyliorhinus canicula) were...... hydrolyzed to degrees of hydrolysis (DH) of 3-4-5-6% with subtilisin. Sardine hydrolysates with low DH, 3% and 4%, presented the most effective peptides to physically stabilize emulsions with smaller droplet size. This implied more protein adsorbed at the interface to act as physical barrier against......% yielded a physically stable emulsion with low concentration of unsaturated aldehydes. These results show the potential of FPH as alternative protein emulsifiers for the production of oxidatively stable fish oil-in-water emulsions....

  8. The effect of metals and metal oxides on biodiesel oxidative stability from promotion to inhibition

    Science.gov (United States)

    Biodiesel, usually the methyl esters of plant oils or other triacylglycerol-containing materials, has become an established alternative to conventional, petroleum-derived diesel fuel. Several technical problems persist when using biodiesel, one of which is oxidation stability upon exposure to oxygen...

  9. Oxidative stability of biodiesel blends derived from waste frying oils

    Directory of Open Access Journals (Sweden)

    Michael Feroldi

    2017-07-01

    Full Text Available The high cost of biodiesel production is mainly linked to the price of raw material.This factor has favored the use of alternative fats and oils such as those used in frying. Since biodiesel can be obtained from several vegetable and animal raw materials, the physicochemical characteristics of the fuel may vary considerably. One of these characteristics is the fatty acid composition. It directly affects the oxidative stability of biodiesel, which can be impaired when the fuel undergoes exposure to sunlight, metals, oxygen and high temperatures. In order to improve the oxidative stability of biodiesels produced from waste frying oil some studies involving blends of different raw materials have been carried out. In this sense, this work aimed to assess the characteristics resulting from the blending of soybean waste frying oil with other waste biodiesels in what concerns to oxidation. The blends of fatty materials were obtained by means of a 2² factorial design. The induction periods of biodiesel blends were enough to meet the ASTM D6751 standard. Swine fat was responsible for the increase in the induction period values.

  10. Chelation and stabilization of berkelium in oxidation state +IV

    Science.gov (United States)

    Deblonde, Gauthier J.-P.; Sturzbecher-Hoehne, Manuel; Rupert, Peter B.; An, Dahlia D.; Illy, Marie-Claire; Ralston, Corie Y.; Brabec, Jiri; de Jong, Wibe A.; Strong, Roland K.; Abergel, Rebecca J.

    2017-09-01

    Berkelium (Bk) has been predicted to be the only transplutonium element able to exhibit both +III and +IV oxidation states in solution, but evidence of a stable oxidized Bk chelate has so far remained elusive. Here we describe the stabilization of the heaviest 4+ ion of the periodic table, under mild aqueous conditions, using a siderophore derivative. The resulting Bk(IV) complex exhibits luminescence via sensitization through an intramolecular antenna effect. This neutral Bk(IV) coordination compound is not sequestered by the protein siderocalin—a mammalian metal transporter—in contrast to the negatively charged species obtained with neighbouring trivalent actinides americium, curium and californium (Cf). The corresponding Cf(III)-ligand-protein ternary adduct was characterized by X-ray diffraction analysis. Combined with theoretical predictions, these data add significant insight to the field of transplutonium chemistry, and may lead to innovative Bk separation and purification processes.

  11. Electrocatalytic activity of bismuth doped silver electrodes

    CERN Document Server

    Amjad, M

    2002-01-01

    Investigation of redox reactions on silver, and bismuth doped silver electrodes in aqueous KOH solutions, by using potentiostatic steady-state polarization technique, has been carried out. The redox wave potential and current displacements along with multiplicity of the latter have been examined. These electrodes were employed for the oxidation of organic molecules such as ethylamine in alkaline media. Subsequently, these electrodes were ranked with respect to their activity for the redox reactions. (author)

  12. Oxidative enzymatic gelation of sugar beet pectin for emulsion stabilization

    DEFF Research Database (Denmark)

    Abang Zaidel, Dayang Norulfairuz; Meyer, Anne S.

    2013-01-01

    Pectin from sugar beet is derived from the sugar beet pulp residue which results when sugar beets are processed for sucrose extraction. The sugar beet pectin has poor gelationability by the classic divalentcation molecular mechanism because of a relatively high acetylation degree and short...... emulsions has recently been investigated in model food emulsions. This paper reviews the pectin chemistry, enzymatic oxidative gelation mechanisms, interaction mechanisms of the sugar beet pectin with the emulsion droplets and explores how the gelation affects the rheology and stability of emulsion systems...

  13. Radiation stability of fluorite-type nuclear oxides

    Energy Technology Data Exchange (ETDEWEB)

    Garrido, Frederico [Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse, CNRS-IN2P3-Universite Paris-Sud, Batiments 104-108, 91405 Orsay Campus (France)], E-mail: Frederico.Garrido@csnsm.in2p3.fr; Vincent, Laetitia [Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse, CNRS-IN2P3-Universite Paris-Sud, Batiments 104-108, 91405 Orsay Campus (France); Nowicki, Lech [Andrzej Soltan Institute for Nuclear Studies, Hoza 69, 00-681 Warsaw (Poland); Sattonnay, Gael [Laboratoire d' Etudes des Materiaux Hors-Equilibre, Institut de Chimie Moleculaire et des Materiaux d' Orsay, UMR 8182, Universite Paris-Sud, Batiment 410, 91405 Orsay Cedex (France); Thome, Lionel [Centre de Spectrometrie Nucleaire et de Spectrometrie de Masse, CNRS-IN2P3-Universite Paris-Sud, Batiments 104-108, 91405 Orsay Campus (France)

    2008-06-15

    Oxides with the fluorite-type structure are radiation tolerant materials. They are widely used or envisaged in hostile nuclear environments, such as nuclear fuels or inert transmutation matrices for actinide burning. Study of the radiation stability of this class of solids in various radiative fields is of major importance. Two issues which may affect the stability of materials are considered in this work: the production of radiation damage (ballistic contribution); the modification of the matrix composition by doping (chemical contribution). Both contributions may drastically affect the solid stability. Urania and zirconia single crystals were chosen as fluorite-type canonical systems. They were implanted with low-energy inert gases (He or Xe). The damage in-growth, due to both ballistic and chemical contributions, was investigated by in situ RBS/C experiments in the channelling mode and TEM. Two main steps in the disordering kinetics were observed for both inert gases. Relevant key parameters were found to be: the number of displaced lattice atoms created by the slowing-down of energetic ions during the implantation process; the concentration of noble gas atoms in the solid which cause the formation of large stress fields surrounding gas aggregates.

  14. Development of disposable bulk-modified screen-printed electrode based on bismuth oxide for stripping chronopotentiometric analysis of lead (II) and cadmium (II) in soil and water samples

    Energy Technology Data Exchange (ETDEWEB)

    Kadara, Rashid O. [Cranfield Health, Cranfield University, Silsoe, Bedfordshire MK45 4DT (United Kingdom); School of Science and Technology, Nottingham Trent University, Clifton Campus, Nottinghamshire NG11 8NS (United Kingdom)], E-mail: kayusee2001@yahoo.co.uk; Tothill, Ibtisam E. [Cranfield Health, Cranfield University, Silsoe, Bedfordshire MK45 4DT (United Kingdom)

    2008-08-08

    A bulk-modified screen-printed carbon electrode characterised for metal ion detection is presented. Bismuth oxide (Bi{sub 2}O{sub 3}) was mixed with graphite-carbon ink to obtain the modified electrode. The best composition was 2% Bi{sub 2}O{sub 3} (wt%) in the graphite-carbon ink. The modified electrode with onboard screen-printed carbon counter and silver-silver chloride pseudo-reference electrodes exhibited good performance in the electrochemical measurement of lead (II) and cadmium (II). The electrode displayed excellent linear behaviour in the concentration range examined (20-300 {mu}g L{sup -1}) with limits of detection of 8 and 16 {mu}g L{sup -1} for both lead (II) and cadmium (II), respectively. The analytical utility of the modified electrode was illustrated by the stripping chronopotentiometric determinations of lead (II) in soil extracts and wastewater samples.

  15. Development of disposable bulk-modified screen-printed electrode based on bismuth oxide for stripping chronopotentiometric analysis of lead (II) and cadmium (II) in soil and water samples

    International Nuclear Information System (INIS)

    Kadara, Rashid O.; Tothill, Ibtisam E.

    2008-01-01

    A bulk-modified screen-printed carbon electrode characterised for metal ion detection is presented. Bismuth oxide (Bi 2 O 3 ) was mixed with graphite-carbon ink to obtain the modified electrode. The best composition was 2% Bi 2 O 3 (wt%) in the graphite-carbon ink. The modified electrode with onboard screen-printed carbon counter and silver-silver chloride pseudo-reference electrodes exhibited good performance in the electrochemical measurement of lead (II) and cadmium (II). The electrode displayed excellent linear behaviour in the concentration range examined (20-300 μg L -1 ) with limits of detection of 8 and 16 μg L -1 for both lead (II) and cadmium (II), respectively. The analytical utility of the modified electrode was illustrated by the stripping chronopotentiometric determinations of lead (II) in soil extracts and wastewater samples

  16. Stability of β-carotene in polyethylene oxide electrospun nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Peinado, I., E-mail: irpeipar@upvnet.upv.es [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Mason, M.; Romano, A. [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Biasioli, F. [Department of Food Quality and Nutrition, Research and Innovation Centre, Fondazione Edmund Mach (FEM), via E. Mach 1, 38010 San Michele all ‘Adige, TN (Italy); Scampicchio, M., E-mail: matteo.scampicchio@unibz.it [Free University of Bolzano, Piazza Università 5, 39100 Bolzano (Italy)

    2016-05-01

    Highlights: • β-carotene was incorporated into PEO-nanofibers by electrospinning. • Properties of the fibers were analyzed by SEM, color analysis, and DSC. • TGA coupled to PTR–ms resulted promising to online-monitoring thermal degradation. • Thermal stability of βc increased after encapsulation into the PEO-nanofibers. - Abstract: β-carotene (βc) was successfully incorporated into electrospun nanofibers of poly-(ethylene oxide) (PEO) with the aim of prolonging its shelf life and thermal stability. The physical and thermal properties of the βc-PEO-nanofibers were determined by scanning electron microscopy (SEM), color analysis, and differential scanning calorimetry (DSC). The nanofibers of PEO and βc-PEO exhibited average fiber diameters of 320 ± 46 and 230 ± 21 nm, with colorimetric coordinates L* = 95.7 ± 2.4 and 89.4 ± 4.6 and b* = −0.5 ± 0.1 and 6.2 ± 3.0 respectively. Thermogravimetric analysis coupled with Proton Transfer–Mass Spectroscopy (TGA/PTR–ms) demonstrated that coated βc inside PEO nanofibers increased thermal stability when compared to standard βc in powder form. In addition, β-carotene in the membranes showed higher stability during storage when compared with β-carotene in solution with a decrease in concentration of 57 ± 4% and 70 ± 2% respectively, thus should extend the shelf life of this compound. Also, TGA coupled with PTR–MS resulted in a promising technique to online-monitoring thermal degradation.

  17. Phase Stability and Transformations in Vanadium Oxide Nanocrystals

    Science.gov (United States)

    Bergerud, Amy Jo

    Vanadium oxides are both fascinating and complex, due in part to the many compounds and phases that can be stabilized as well as the phase transformations which occur between them. The metal to insulator transitions (MITs) that take place in vanadium oxides are particularly interesting for both fundamental and applied study as they can be induced by a variety of stimuli ( i.e., temperature, pressure, doping) and utilized in many applications (i.e., smart windows, sensors, phase change memory). Nanocrystals also tend to demonstrate interesting phase behavior, due in part to the enhanced influence of surface energy on material thermodynamics. Vanadium oxide nanocrystals are thus expected to demonstrate very interesting properties in regard to phase stability and phase transformations, although synthesizing vanadium oxides in nanocrystal form remains a challenge. Vanadium sesquioxide (V2O3) is an example of a material that undergoes a MIT. For decades, the low temperature monoclinic phase and high temperature corundum phase were the only known crystal structures of V2O3. However, in 2011, a new metastable polymorph of V2O3 was reported with a cubic, bixbyite crystal structure. In Chapter 2, a colloidal route to bixbyite V2O 3 nanocrystals is presented. In addition to being one of the first reported observations of the bixbyite phase in V2O3, it is also one of the first successful colloidal syntheses of any of the vanadium oxides. The nanocrystals possess a flower-like morphology, the size and shape of which are dependent on synthesis time and temperature, respectively. An aminolysis reaction mechanism is determined from Fourier transform infrared spectroscopy data and the bixbyite crystal structure is confirmed by Rietveld refinement of X-ray diffraction (XRD) data. Phase stability is assessed in both air and inert environments, confirming the metastable nature of the material. Upon heating in an inert atmosphere above 700°C, the nanocrystals irreversibly transform

  18. Synergy effects between bismuth molybdate catalyst phases (Bi/Mo from 0.57 to 2) for the selective oxidation of propylene to arcrolein

    DEFF Research Database (Denmark)

    Le, Minh Thang; Well, Willy van; Stoltze, Per

    2005-01-01

    In this work, the synergy effect between different phases of bismuth molybdate catalysts was investigated systematically. The catalysts were prepared by spray drying and had a Bi/Mo atomic between 0.57 and 2. It is found that the synergy effect is only observed in mixtures containing γ......-phase. A mixture with Bi/Mo ratio = 1.3 consisting of γ- and α-phase, exhibits the highest activity. Less homogeneous ‘artificial mixtures’ exhibit reduced synergy effects when compared to homogeneous ‘in situ mixtures’....

  19. Stability of a novel synthetic amorphous manganese oxide in contrasting soils

    Czech Academy of Sciences Publication Activity Database

    Ettler, V.; Knytl, V.; Komárek, M.; Della Puppa, L.; Bordas, F.; Mihaljevič, M.; Klementová, Mariana; Šebek, O.

    2014-01-01

    Roč. 214, FEB (2014), s. 2-9 ISSN 0016-7061 Institutional support: RVO:61388980 Keywords : Amorphous manganese oxide * Stability * Soils * Chemical stabilization * Pollution Subject RIV: CA - Inorganic Chemistry Impact factor: 2.772, year: 2014

  20. Improving the oxidation resistance and stability of Ag nanoparticles by coating with multilayered reduced graphene oxide

    Science.gov (United States)

    Li, Yahui; Zhang, Huayu; Wu, Bowen; Guo, Zhuo

    2017-12-01

    A kind of coating nanostructure, Ag nanoparticles coated with multilayered reduced graphene oxide (RGO), is fabricated by employing a three-step reduction method in an orderly manner, which is significantly different from the conventional structures that are simply depositing or doping with Ag nanoparticles on RGO via chemical reduction. The as-prepared nanostructure is investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electronic diffraction (SEAD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The results show that the obtained Ag/RGO nanostructure is observed to be a perfect coating structure with well dispersed Ag particles, which is responsible for the remarkable oxidation resistance. The results of XPS spectra indicate the content of metallic Ag is far greater than that of Ag oxides despite of prolonged exposure to the air, which fully demonstrate the excellent stability of thus coating nanostructure.

  1. The stability study of myristyl dimethyl amine oxide as an amphoteric ...

    African Journals Online (AJOL)

    The stability study of myristyl dimethyl amine oxide as an amphoteric surfactant in strong oxidant media containing 5 % m/m sodium hypochlorite through measurement of decomposing rate using high performance liquid chromatography and two phase titration.

  2. THORIUM DISPERSION IN BISMUTH

    Science.gov (United States)

    Bryner, J.S.

    1961-07-01

    The growth of thorium bismutaide particles, which are formed when thorium is suspended in liquid bismuth, is inhibited when the liquid metal suspension is being flowed through a reactor and through a heat exchanger in sequence. It involves the addition of as little as 1 part by weight of tellurium to 100 parts of thorium. This addition is sufficient to inhibit particle growth and agglomeration.

  3. Bismuth centred magnetic perovskite: A projected multiferroic

    International Nuclear Information System (INIS)

    Kundu, Asish K.; Seikh, Md. Motin; Nautiyal, Pranjal

    2015-01-01

    In recent time substantial attention has been initiated to understand the physics behind multiferroism and to design new multiferroic materials. BiMnO 3 and BiFeO 3 are the well-studied Bi-centred multiferroic oxides. BiMnO 3 is a ferromagnetic–ferroelectric (metastable) phase and require drastic conditions to synthesize. However, lanthanum substituted BiMnO 3 phases stabilized at ambient pressure. It is thus of major importance to increase the number of ferromagnetic perovskites with Bi cations that could be designed under ambient conditions. In this article, we have presented an up to date report of investigations on Bi-centred magnetic perovskites, a prospective material for multiferroic application. Central focus is concentrated on La 0.5 Bi 0.5 MnO 3 perovskite with various substitutions at different levels. A few of these perovskites are found to be of practical importance e.g. La 0.5 Bi 0.5 Mn 0.67 Co 0.33 O 3 with high dielectric permittivity coupled with ferromagnetism. A comprehensive analysis of different physical functionalities and their interrelation for a wide range of compositions of these Bi-centred perovskites is presented. It has been found that the complex magnetic behaviour originates from mixed valence metal ions. The ferroelectricity is associated with the 6s 2 lone pair of Bi 3+ cations. The magnetic ground state influences the dielectric properties reflecting the multiferroism in a single material. - Highlights: • Multiferroics have attracted increasing attention due to their possible device applications. • Bismuth centred magnetic perovskite is one kind of such promising multiferroic materials. • Ferromagnetic Bi-perovskites, which are synthesized at ambient conditions, have been discussed

  4. Bismuth toxicity in patients treated with bismuth iodoform paraffin packs.

    Science.gov (United States)

    Atwal, A; Cousin, G C S

    2016-01-01

    Bismuth is a heavy metal used in bismuth iodoform paraffin paste (BIPP) antiseptic dressings and in a number of other medical preparations. It can be absorbed systemically and cause toxicity. We report 2 cases of such neurotoxicity after it was used in operations on the jaws. Copyright © 2015. Published by Elsevier Ltd.

  5. Tribochemistry of Bismuth and Bismuth Salts for Solid Lubrication

    NARCIS (Netherlands)

    Gonzalez Rodriguez, P.; van den Nieuwenhuijzen, Karin Jacqueline Huberta; Lette, W.; Schipper, Dirk J.; ten Elshof, Johan E.

    2016-01-01

    One of the main trends in the past decades is the reduction of wastage and the replacement of toxic compounds in industrial processes. Some soft metallic particles can be used as nontoxic solid lubricants in high-temperature processes. The behavior of bismuth metal particles, bismuth sulfide

  6. An ultrasonic-accelerated oxidation method for determining the oxidative stability of biodiesel.

    Science.gov (United States)

    Avila Orozco, Francisco D; Sousa, Antonio C; Domini, Claudia E; Ugulino Araujo, Mario Cesar; Fernández Band, Beatriz S

    2013-05-01

    Biodiesel is considered an alternative energy because it is produced from fats and vegetable oils by means of transesterification. Furthermore, it consists of fatty acid alkyl esters (FAAS) which have a great influence on biodiesel fuel properties and in the storage lifetime of biodiesel itself. The biodiesel storage stability is directly related to the oxidative stability parameter (Induction Time - IT) which is determined by means of the Rancimat® method. This method uses condutimetric monitoring and induces the degradation of FAAS by heating the sample at a constant temperature. The European Committee for Standardization established a standard (EN 14214) to determine the oxidative stability of biodiesel, which requires it to reach a minimum induction period of 6h as tested by Rancimat® method at 110°C. In this research, we aimed at developing a fast and simple alternative method to determine the induction time (IT) based on the FAAS ultrasonic-accelerated oxidation. The sonodegradation of biodiesel samples was induced by means of an ultrasonic homogenizer fitted with an immersible horn at 480Watts of power and 20 duty cycles. The UV-Vis spectrometry was used to monitor the FAAS sonodegradation by measuring the absorbance at 270nm every 2. Biodiesel samples from different feedstock were studied in this work. In all cases, IT was established as the inflection point of the absorbance versus time curve. The induction time values of all biodiesel samples determined using the proposed method was in accordance with those measured through the Rancimat® reference method by showing a R(2)=0.998. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Theoretical Investigation of Bismuth-Based Semiconductors for Photocatalytic Applications

    KAUST Repository

    Laradhi, Shaikhah

    2017-11-01

    Converting solar energy to clean fuel has gained remarkable attention as an emerged renewable energy resource but optimum efficiency in photocatalytic applications has not yet been reached. One of the dominant factors is designing efficient photocatalytic semiconductors. The research reveals a theoretical investigation of optoelectronic properties of bismuth-based metal oxide and oxysulfide semiconductors using highly accurate first-principles quantum method based on density functional theory along with the range-separated hybrid HSE06 exchange-correlation functional. First, bismuth titanate compounds including Bi12TiO20, Bi4Ti3O12, and Bi2Ti2O7 were studied in a combined experimental and theoretical approach to prove its photocatalytic activity under UV light. They have unique bismuth layered structure, tunable electronic properties, high dielectric constant and low electron and effective masses in one crystallographic direction allowing for good charge separation and carrier diffusion properties. The accuracy of the investigation was determined by the good agreement between experimental and theoretical values. Next, BiVO4 with the highest efficiency for oxygen evolution was investigated. A discrepancy between the experimental and theoretical bandgap was reported and inspired a systematic study of all intrinsic defects of the material and the corresponding effect on the optical and transport properties. A candidate defective structure was proposed for an efficient photocatalytic performance. To overcome the carrier transport limitation, a mild hydrogen treatment was also introduced. Carrier lifetime was enhanced due to a significant reduction of trap-assisted recombination, either via passivation of deep trap states or reduction of trap state density. Finally, an accurate theoretical approach to design a new family of semiconductors with enhanced optoelectronic properties for water splitting was proposed. We simulated the solid solutions Bi1−xRExCuOS (RE = Y, La

  8. Oxidative Stability and Shelf Life of Foods Containing Oils and Fats

    DEFF Research Database (Denmark)

    Oxidative Stability and Shelf Life of Foods Containing Oils and Fats focuses on food stability and shelf life, both important factors in the improvement and development of food products. This book, relevant for professionals in the food and pet food industries, presents an evaluation of methods...... for studies on the oxidative stability and shelf life of bulk oils/fats, fried oils and foods, food emulsions, dried foods, meat and meat products, and seafood in food and pet food. Focuses on the application of various evaluation methods to studies of oxidative stability and shelf life in oils and fats...... and oils and fats-containing foods in the food and pet food industries. Discusses oxidative stability and shelf life of low-moisture (dry) food, including dry pet food. Discusses lipid co-oxidation with protein because a number of food products contain both lipids and proteins. Directed mainly toward...

  9. Determination of the oxidation stability of biodiesel and oils by spectrofluorimetry and multivariate calibration.

    Science.gov (United States)

    Meira, Marilena; Quintella, Cristina M; Tanajura, Alessandra Dos Santos; da Silva, Humbervânia Reis Gonçalves; Fernando, Jaques D'Erasmo Santos; da Costa Neto, Pedro R; Pepe, Iuri M; Santos, Mariana Andrade; Nascimento, Luciana Lordelo

    2011-07-15

    Oxidation stability is an important quality parameter for biodiesel. In general, the methods used to evaluate the oxidation stability of oils and biodiesels are time-consuming. This work reports the use of spectrofluorimetry, a fast analytical technique, associated with multivariate data analysis as a powerful analytical tool to prediction of the oxidation stability. The prediction of the oxidation stability showed a good agreement with the results obtained by the EN14112 reference method Rancimat. The models presented high correlation (0.99276 and 0.97951) between real and predicted values. The R(2) values of 0.98557 and 0.95943 indicated the accuracy of the models to predict the oxidation stability of soy oil and soy biodiesel, respectively. The residual distribution does not follow a trend with respect to the predicted variables indicating the good quality of the fits. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Perovskite Oxide Thin Film Growth, Characterization, and Stability

    Science.gov (United States)

    Izumi, Andrew

    Studies into a class of materials known as complex oxides have evoked a great deal of interest due to their unique magnetic, ferroelectric, and superconducting properties. In particular, materials with the ABO3 perovskite structure have highly tunable properties because of the high stability of the structure, which allows for large scale doping and strain. This also allows for a large selection of A and B cations and valences, which can further modify the material's electronic structure. Additionally, deposition of these materials as thin films and superlattices through techniques such as pulsed laser deposition (PLD) results in novel properties due to the reduced dimensionality of the material. The novel properties of perovskite oxide heterostructures can be traced to a several sources, including chemical intermixing, strain and defect formation, and electronic reconstruction. The correlations between microstructure and physical properties must be investigated by examining the physical and electronic structure of perovskites in order to understand this class of materials. Some perovskites can undergo phase changes due to temperature, electrical fields, and magnetic fields. In this work we investigated Nd0.5Sr 0.5MnO3 (NSMO), which undergoes a first order magnetic and electronic transition at T=158K in bulk form. Above this temperature NSMO is a ferromagnetic metal, but transitions into an antiferromagnetic insulator as the temperature is decreased. This rapid transition has interesting potential in memory devices. However, when NSMO is deposited on (001)-oriented SrTiO 3 (STO) or (001)-oriented (LaAlO3)0.3-(Sr 2AlTaO6)0.7 (LSAT) substrates, this transition is lost. It has been reported in the literature that depositing NSMO on (110)-oriented STO allows for the transition to reemerge due to the partial epitaxial growth, where the NSMO film is strained along the [001] surface axis and partially relaxed along the [11¯0] surface axis. This allows the NSMO film enough

  11. A guide to the influence of bismuth on lead/acid battery performance

    Science.gov (United States)

    Koop, M. J.; Rand, D. A. J.; Culpin, B.

    A review is given of the literature that deals with the influence of bismuth on the microstructure, oxygen/hydrogen evolution kinetics and anodic corrosion of lead and lead alloys with regard to their performance in lead/acid batteries. Analysis shows that there is considerable disagreement as to the effect of bismuth on lead microstructure. For example, the various investigators report an increase, a decrease, or negligible change in grain size. In general, it is concluded that the oxygen overpotential on PbO 2 is lowered in the presence of bismuth. The effect is enhanced as the bismuth content is increased. It is postulated that the behaviour results from the formation of a mixed oxide, PbO 2·BiO x. By contrast, cathodic hydrogen evolution is reported widely to be largely unaffected by bismuth. Nevertheless, there is evidence that the reaction is particularly sensitive to the surface characteristics of electrodes and that these features can induce either a suppression or an enhancement of the hydrogen-gassing rate. Many studies have shown that bismuth accelerates the anodic corrosion of lead alloys, especially at high concentrations of bismuth. At 0.1 wt.% bismuth and below, the effect on the corrosion rate is negligible. The authors of this discussion are of the opinion that much of the conflicting evidence in the areas reported is caused by spurious differences in grain structure that are introduced by variations in sample preparation, rather than by the action of bismuth itself. In battery-related tests, bismuth has usually been found to exert little influence on performance, but there is some suggestion that cycle life is increased. The present body of knowledge is insufficient to confirm the correctness of any currently specified maximum level for bismuth with respect to a given battery design.

  12. Study on corrosion test techniques in lead bismuth eutectic flow. Joint research report in JFY2002

    International Nuclear Information System (INIS)

    Takahashi, Minoru; Sekimoto, Hiroshi

    2003-03-01

    The evaluation of corrosion behaviors of core and structural materials in lead bismuth eutectic is one of the key issues for the utilization of lead bismuth eutectic as a coolant of the primary loops of lead bismuth cooled fast breeder reactors (FBRs) and the intermediate heat transport media of new-type steam generators of the sodium cooled FBRs. The purpose of the present study is to establish corrosion test techniques in lead bismuth eutectic flow. The techniques of steel corrosion test and oxygen control in flowing lead bismuth eutectic, and the technologies of a lead bismuth flow test at high temperature and high velocity were developed through corrosion test using a lead bismuth flow test loop of the Tokyo Institute of Technology in JFY2002. The major results are summarized as follows: (1) Techniques of fabrication, mount and rinse of corrosion specimens, measurement method of weight loss, and SEM/EDX analysis method have been established through lead bismuth corrosion test. (2) Weight losses were measured, corrosion and lead bismuth-adhered layers and eroded parts were observed in two 1000 hr-corrosion tests, and the results were compared with each other for twelve existing steels including ODS, F82H and SUH-3. (3) An oxygen sensor made of zirconia electrolyte structurally resistant to thermal stress and thermal shock was developed and tested in the lead bismuth flow loop. Good performance has been obtained. (4) An oxygen control method by injecting argon and hydrogen mixture gas containing steam into lead bismuth was applied to the lead bismuth flow loop, and technical issues for the development of the oxygen control method were extracted. (5) Technical measures for freezing and leakage of lead bismuth in the flow loop were accumulated. (6) Technical measures for flow rate decrease/blockage due to precipitation of oxide and corrosion products in a low temperature section of the lead bismuth flow loop were accumulated. (7) Electromagnetic flow meters with MI

  13. Effect of natural polyphenol on the oxidative stability of pecan oil.

    Science.gov (United States)

    Zhang, Yuan-Yuan; Zhang, Fang; Thakur, Kiran; Ci, Ao-Te; Wang, Hao; Zhang, Jian-Guo; Wei, Zhao-Jun

    2017-10-05

    We evaluated the antioxidant activity of natural polyphenols which gives high oxidative stability to the pecan oil. The in vitro DPPH radical scavenging, reducing power and total antioxidant activity of tested antioxidants demonstrated that tannic acid displayed the highest DPPH scavenging activity and provided the largest reducing power. During storage of pecan oil, based on oxidative stability tests, we further evaluated the protective effect of polyphenols and synthetic antioxidants on the oxidative stability of pecan oil. The results showed that caffeic acid inhibited oxidation of pecan oil effectively. Sesamol and catechin showed slight improvement in oxidative stability, while ferulic acid, erucic acid and rutin had no effect. Taken together, compared with synthetic antioxidants (TBHQ, BHT, BHA), caffeic acid was observed to be stronger than BHT and BHA and was close to TBHQ. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Radiation Stability of Zinc Oxide Pigment Modified by Zirconium Oxide and Aluminum Oxide Nanopowders

    International Nuclear Information System (INIS)

    Mikhailov, M. M.; Neshchimenko, V. V.; Li Chundong

    2009-01-01

    The effect on the reflective spectra of heat treatment and modification of ZnO pigments by 1-30 wt.%ZrO 2 and Al 2 O 3 nanoparticles has been investigated before and after irradiation by 100 keV protons with a fluence of 5x10 15 cm -2 . It is established that with the optimum concentration of 5 wt.% nanoparticles and the temperature of 800 deg. C a 20% increase in the radiation stability is observed for the modified ZnO pigment in comparison with the not modified pigment. The decrease of absorption in the modified pigments is determined by the decrease of the intensity of the absorption bands of the zinc vacancies (V zn - ), oxygen vacancies (V o + ) and donor-acceptor couples (V zn - - Zn i 0 ).

  15. Adsorption and condensation of bismuth on tungsten

    International Nuclear Information System (INIS)

    Radon, T.; Sidorski, Z.

    1979-01-01

    The bismuth-tungsten system was studied by means of field emission microscopy. The average work function changes induced by the bismuth adsorption were measured for different amounts of adsorbed bismuth. It was found that the adsorption of bismuth changes the work function of tungsten only slightly. The penetration of bismuth into the tungsten substrate was observed. The growth of bismuth single crystals was studied when bismuth was deposited with a rate of about 6 monolayers per minute onto the tungsten substrate and kept at 470 K. Bismuth single crystals with two-fold symmetry occurred most often on the (100) tungsten planes. On the (111) tungsten plane bismuth crystals with three-fold symmetry were observed. An explanation of the observed phenomena is proposed. (Auth.)

  16. Nano crystalline Bi{sub 2}(VO{sub 5}) phases in lithium bismuth borate glasses containing mixed vanadium-nickel oxides

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, Arti, E-mail: artidabhur@gmail.com; Khasa, S.; Dahiya, M. S. [Department of Physics, Deenbandhu Chhotu Ram University of Science and Technology, Murthal, India-131039 (India); Agarwal, A. [Department of Applied Physics, G. J. University of Science and Technology, Hisar, India-125001 (India)

    2016-05-23

    Glass composition 7V{sub 2}O{sub 5}·23Li{sub 2}O·20Bi{sub 2}O{sub 3}·50B{sub 2}O{sub 3} and x(2NiO·V{sub 2}O{sub 5})·(30-x)Li{sub 2}O·20Bi{sub 2}O{sub 3}·50B{sub 2}O{sub 3}, x=0, 2, 5, 7 and 10, were produced by conventional melt quenching technique. The quenched amorphous glass samples were annealed at temperatures 400°C and 500°C for 6 hours. The Bi{sub 2}(VO{sub 5}) crystallite were grown in all prepared glass matrix. Tn vanadium lithium bismuth borate glass (annealed), the some phrase of V{sub 2}O{sub 5}-crystal were observed along with the nano crystalline Bi{sub 2}(VO{sub 5}) phase. The sharp peaks in FTTR spectra of all annealed compositions were also compatible with the XRD diffraction peaks of the system under investigation. Average crystalline size (D) of the Bi{sub 2}(VO{sub 5}) nano-crystallite was ~30 nm for samples annealed at 400°C and ~42 nm for samples annealed at 500°C. Lattice parameter and the lattice strain for all the samples was also calculated corresponding to the (113) plane of Bi{sub 2}(VO{sub 5}) crystallite.

  17. Study of the redox properties of bismuth-molybdate and uranium-antimonate catalysts

    International Nuclear Information System (INIS)

    Paz-Pujalt, G.R.

    1985-01-01

    The oxidation/reduction properties of various bismuth molybdates, molybdenum trioxide, bismuth oxide, uranium antimonate, and iron antimonate have been studied in an effort to correlate them to their catalytic properties. The temperature at which γ-phase bismuth molybdate is prereduced plays an important role in the behavior the catalyst exhibits under reoxidation conditions. The overall behavior of γ-phase bismuth molybdate under catalytic conditions may be divided into two temperature regimes: below 360 0 C the catalyst shows a higher rate of propylene adsorption than product desorption, and above 360 0 C where produced desorption is dominant. This temperature is the same at which the Arrhenius plot for the reaction has a break. Several reduction of γ-bismuth molybdate results in the formation of clusters of bismuth metal and crystallites of molybdenum dioxide. This is irreversible. The reoxidation of the bismuth molybdate catalysts shows the presence of two oxygen incorporation temperatures. The ratios of the areas under these peaks are not the same for the three catalysts. Uranium antimonate shows a lesser degree of lattice oxygen participation. During several reduction the catalyst decomposes partially and an excess of antimony is evident. The isothermal reduction profiles of the catalysts permitted their classification into either of two reduction models: (A) α-, β-, γ-phase bismuth molybdates, molybdenum trioxide, bismuth oxide, and the equimolar mixture follow the nucleation model, (B) uranium antimonate, and iron antimonate following the shrinking sphere model. These models have been correlated to certain characteristics of these catalysts. Group A catalysts show a high degree of lattice oxygen participation (migration of bulk oxygen to surface nuclei). In contrast in group B catalysts only a few layers of oxygen are peeled off during catalysis

  18. Thermo-Oxidative Stability of Polyimide Composite for Aerospace Applications

    National Research Council Canada - National Science Library

    Leung, Chuk

    1998-01-01

    .... Our approach aims at developing a understanding of the influence of polymer chemistry on composite stability by conducting novel polymer modifications and formulations to provide different polymer...

  19. The effect of synthetic antioxidants on the oxidative stability of biodiesel

    CSIR Research Space (South Africa)

    Focke, WW

    2012-04-01

    Full Text Available Biodiesels were prepared using base catalyzed methanolysis of sunflower, soybean and canola oils. Rancimat oxidative stability measurements showed that the induction period (IP) for neat canola biodiesel conformed to EN 14214, the European...

  20. Corrosion by liquid lead and lead-bismuth: experimental results review and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jinsuo [Los Alamos National Laboratory

    2008-01-01

    Liquid metal technologies for liquid lead and lead-bismuth alloy are under wide investigation and development for advanced nuclear energy systems and waste transmutation systems. Material corrosion is one of the main issues studied a lot recently in the development of the liquid metal technology. This study reviews corrosion by liquid lead and lead bismuth, including the corrosion mechanisms, corrosion inhibitor and the formation of the protective oxide layer. The available experimental data are analyzed by using a corrosion model in which the oxidation and scale removal are coupled. Based on the model, long-term behaviors of steels in liquid lead and lead-bismuth are predictable. This report provides information for the selection of structural materials for typical nuclear reactor coolant systems when selecting liquid lead or lead bismuth as heat transfer media.

  1. Oxidation stability of rapeseed biodiesel/petroleum diesel blends

    DEFF Research Database (Denmark)

    Østerstrøm, Freja From; Anderson, James E.; Mueller, Sherry A.

    2016-01-01

    The effects of fuels, including contaminants such as fuel oxidation products, on vehicle fuel system materials are important for vehicle durability and operation. Fuel oxidation is accelerated at the elevated temperatures and pressures of vehicle fuel systems. An extended time-course study...... of the oxidation of a biodiesel fuel blend consisting of 30% (v/v) rapeseed methyl ester in petroleum diesel (B30) was conducted at 70 and 90 °C with three aeration rates. Oxidation rates increased with increasing temperature as indicated by decreases in induction period (Rancimat), concentrations of unsaturated......, and then decreased reflecting volatilization of fuel and volatile oxidation products. Peroxide concentration showed a peak that coincided with the most rapid rate of oxygen incorporation, acid formation, and polyunsaturated FAME degradation. Net oxygen incorporation exhibited a plateau at approximately 5-6 wt % O...

  2. In-flight oxidation of iron particles sprayed using gas and water stabilized plasma torch

    Czech Academy of Sciences Publication Activity Database

    Espie, G.; Denoirjean, A.; Fauchais, P.; Clabbe, J.C.; Dubský, Jiří; Schneeweiss, O.; Voleník, Karel

    2005-01-01

    Roč. 195, č. 1 (2005), s. 17-28 ISSN 0257-8972 Institutional research plan: CEZ:AV0Z20430508 Keywords : in-flight oxidation * gas stabilized plasma * water stabilized plasma Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.646, year: 2005

  3. Ni/YSZ microstructure optimization for long-term stability of solid oxide electrolysis cells

    DEFF Research Database (Denmark)

    Hauch, Anne; Brodersen, Karen; Karas, Filip

    2014-01-01

    ; i.e. solid oxide fuel cells (SOFC). However, previous long-term tests have shown that the stability behavior of the Ni/yttria-stabilized-zirconia (Ni/YSZ) fuel electrode may fall out quite differently depending on whether the cell is operated in fuel cell or electrolysis mode at otherwise similar...

  4. Emulsifier type, metal chelation and pH affect oxidative stability of n-3-enriched emulsions

    DEFF Research Database (Denmark)

    Haahr, Anne-Mette; Jacobsen, Charlotte

    2008-01-01

    -enriched oil-in-water emulsion. The selected food emulsifiers were Tween 80, Citrem, sodium caseinate and lecithin. Lipid oxidation was evaluated by determination of peroxide values and secondary volatile oxidation products. Moreover, the zeta potential and the droplet sizes were determined. Twen resulted...... in the least oxidatively stable emulsions, followed by Citrem. When iron was present, caseinate-stabilized emulsions oxidized slower than lecithin emulsions at pH 3, whereas the opposite was the case at pH 7. Oxidation generally progressed faster at pH 3 than at pH 7, irrespective of the addition of iron. EDTA...

  5. Adsorption of polyelectrolytes and charged block copolymers on oxides consequences for colloidal stability

    NARCIS (Netherlands)

    Hoogeveen, N.G.

    1996-01-01


    The aim of the study described in this thesis was to examine the adsorption properties of polyelectrolytes and charged block copolymers on oxides, and the effect of these polymers on the colloidal stability of oxidic dispersions. For this purpose the interaction of some well-characterised

  6. Monitoring of butter and animal fat oxidation stability by differential scanning calorimetry (DSC)

    OpenAIRE

    Jasminka Sadadinović; Snežana Mičević; Nusreta Đonlagić; Ramzija Topčagić; Zumra Berbić

    2005-01-01

    Oxidation of fat is one of the basic reactions which causes the depletion of butter and animal fat quality as well as other products containing them. Since the most of reaction products of fat oxidation are harmful for consumers' health, inadequate and scarce monitoring of edible fats and fat containing products quality, presents increased health risk as well as financial loss for the producers. In fat oxidation stability estimation, standard chemical methods were used (iodine number, acid nu...

  7. Stability of Ruddlesden-Popper-structured oxides in humid conditions

    Science.gov (United States)

    Lehtimäki, M.; Yamauchi, H.; Karppinen, M.

    2013-08-01

    Some of layered transition-metal oxides are known to react with atmospheric humidity to form through topotactic intercalation reactions new water-containing layered structures. Here we investigate the influence of oxygen content (7-δ) of the Ruddlesden-Popper-structured Sr3FeMO7-δ (M=Ni, Mn, Ti) oxides on the water-intercalation reaction. It is found that their oxygen contents influence greatly the reactivity of the phases with water. Other factors possibly affecting the reactivity are discussed on the basis of the present data in combination with a comprehensive review of previous works on Ruddlesden-Popper and related layered oxide phases.

  8. Color and oxidative stability of nitrite-free cured meat after gamma irradiation

    International Nuclear Information System (INIS)

    Shahidi, F.; Pegg, R.B.; Shamsuzzaman, K.

    1991-01-01

    The effects of 5 and 10 kGy irradiation on the color and oxidative stability of meats treated with nitrite or a nitrite-free curing system were investigated. The nitrite-free curing system consisted of the preformed cooked cured-meat pigment, sodium ascorbate and sodium tripolyphosphate with or without sodium acid pyrophosphate. Irradiation had no detrimental effects on the color or flavor of either cured samples. Polyphosphates had a beneficial effect on oxidative stability but had a slight detrimental effect on color stability of irradiated samples

  9. Improving oxidative stability of soya and sunflower oil using ...

    African Journals Online (AJOL)

    Rosmarinus officinallis) and tert- butyl-hydroquinone (TBHQ) as possible antioxidants in sunflower and soya oil. Upon addition of 200 ppm of dried leaf extract, acetone extract yielded protection of the samples against oxidation more efficiently as ...

  10. 21 CFR 73.1162 - Bismuth oxychloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth oxychloride. 73.1162 Section 73.1162 Food... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1162 Bismuth oxychloride. (a) Identity. (1) The color additive bismuth oxychloride is a synthetically prepared white or nearly white amorphous or finely...

  11. 21 CFR 73.2162 - Bismuth oxychloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth oxychloride. 73.2162 Section 73.2162 Food... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2162 Bismuth oxychloride. (a) Identity and specifications. (1) The color additive bismuth oxychloride shall conform in identity and specifications to the...

  12. On the stability of sub-stoichiometric uranium oxides

    Science.gov (United States)

    Winer, K.; Colmenares, C. A.; Smith, R. L.; Wooten, F.

    1986-12-01

    The oxidation of clean, high-purity polycrystalline uranium metal surfaces for low exposures to dry oxygen was studied with AES and XPS in an attempt to substantiate claims for the formation of a stable UO surface phase at ambient temperatures. We found no evidence for such a surface phase and found instead that grossly sub-stoichiometric surface oxides were formed after sequential oxygen saturation and heating.

  13. AN EXPERIMENTAL INVESTIGATION ON OXIDATIVE STABILITY OF BIODIESEL

    Directory of Open Access Journals (Sweden)

    Mustafa ÇANAKÇI

    2004-02-01

    Full Text Available Biodiesel is an alternative fuel for diesel engines that can be produced from renewable feed stocks such as vegetable oil and animal fats. These feed stocks are reacted with an alcohol to produce alkyl monoesters. The obtained ester can be used in conventional diesel engines with little or no modification. Biodiesel, especially if produced from highly unsaturated oils, oxidizes more rapidly than diesel fuel. This paper reports the results of accelerated oxidation tests on biodiesel. These tests show the impact of time, oxygen flow rate, temperature, metals, and feedstock type on the rate of oxidation. Blending with diesel fuel and the addition of antioxidants are also explored. The data indicate that without antioxidants, biodiesel will oxidize very quickly at temperatures typical of diesel engines. This oxidation results in increases in peroxide value, acid value, and viscosity. While the peroxide value generally reaches a plateau of about 350 meq O2/kg, the acid value and viscosity increase monotonically as oxidation proceeds.

  14. Multidentate block-copolymer-stabilized ultrasmall superparamagnetic iron oxide nanoparticles with enhanced colloidal stability for magnetic resonance imaging.

    Science.gov (United States)

    Chan, Nicky; Laprise-Pelletier, Myriam; Chevallier, Pascale; Bianchi, Andrea; Fortin, Marc-André; Oh, Jung Kwon

    2014-06-09

    Ultrasmall superparamagnetic iron oxide nanoparticles (USPIOs) with diameters chemistry of USPIOs to ensure individual colloidal USPIOs with a ligand monolayer and to impart biocompatibility and enhanced colloidal stability is essential for successful clinical applications. Herein, an effective and versatile strategy enabling the development of aqueous colloidal USPIOs stabilized with well-defined multidentate block copolymers (MDBCs) is reported. The multifunctional MDBCs are designed to consist of an anchoring block possessing pendant carboxylates as multidentate anchoring groups strongly bound to USPIO surfaces and a hydrophilic block having pendant hydrophilic oligo(ethylene oxide) chains to confer water dispersibility and biocompatibility. The surface of USPIOs is saturated with multiple anchoring groups of MDBCs, thus exhibiting excellent long-term colloidal stability as well as enhanced colloidal stability at biologically relevant electrolyte, pH, and temperature conditions. Furthermore, relaxometric properties as well as in vitro and in vivo MR imaging results demonstrate that the MDBC-stabilized USPIO colloids hold great potential as an effective T1 contrast agent.

  15. Study of the oxidative stability of oils vegetables for production of Biodiesel

    Directory of Open Access Journals (Sweden)

    Marco Aurélio R Melo

    2014-04-01

    Full Text Available Biodiesel is technological and estrategical Brazilian oportunity once this country has abundant vegetable species which oils are extracted to produce this biofuel. Oleaginous viability depends on its technical, economical and social-environmental competitiviness. Fatty acid variety determines its thermal and oxidative stability, mainly polyunsaturated ones. In this point of view, this papers aims evaluate oxidative stability and resistence to thermal decomposition of pequi, buriti and macauba oils. These fatty acids profiles are in agreement with literature data. Comparing thermal and oxidative stability of these oils, it can be seen pequi oil is more easily to oxidate than buriti and macauba oils when PetroOXY and Rancimat methods are employed.

  16. Thermal Stability Limits of Imidazolium Ionic Liquids Immobilized on Metal-Oxides.

    Science.gov (United States)

    Babucci, Melike; Akçay, Aslı; Balci, Volkan; Uzun, Alper

    2015-08-25

    Thermal stability limits of 33 imidazolium ionic liquids (ILs) immobilized on three of the most commonly used high surface area metal-oxides, SiO2, γ-Al2O3, and MgO, were investigated. ILs were chosen from a family of 13 cations and 18 anions. Results show that the acidity of C2H of an imidazolium ring is one of the key factors controlling the thermal stability. An increase in C2H bonding strength of ILs leads to an increase in their stability limits accompanied by a decrease in interionic energy. Systematic changes in IL structure, such as changes in electronic structure and size of anion/cation, methylation on C2 site, and substitution of alkyl groups on the imidazolium ring with functional groups have significant effects on thermal stability limits. Furthermore, thermal stability limits of ILs are influenced strongly by acidic character of the metal-oxide surface. Generally, as the point of zero charge (PZC) of the metal-oxide increases from SiO2 to MgO, the interactions of IL and metal-oxide dominate over interionic interactions, and metal-oxide becomes the significant factor controlling the stability limits. However, thermal stability limits of some ILs show the opposite trend, as the chemical activities of the cation functional group or the electron donating properties of the anion alter IL/metal-oxide interactions. Results presented here can help in choosing the most suitable ILs for materials involving ILs supported on metal-oxides, such as for supported ionic liquid membranes (SILM) in separation applications or for solid catalyst with ionic liquid layer (SCILL) and supported ionic liquid phase (SILP) catalysts in catalysis.

  17. Oxidative stabilization of polyacrylonitrile nanofibers and carbon nanofibers containing graphene oxide (GO): a spectroscopic and electrochemical study.

    Science.gov (United States)

    Gergin, İlknur; Ismar, Ezgi; Sarac, A Sezai

    2017-01-01

    In this study, a precursor for carbon nanofibers (CNF) was fabricated via electrospinning and carbonized through a thermal process. Before carbonization, oxidative stabilization should be applied, and the oxidation mechanism also plays an important role during carbonization. Thus, the understanding of the oxidation mechanism is an essential part of the production of CNF. The oxidation process of polyacrylonitrile was studied and nanofiber webs containing graphene oxide (GO) are obtained to improve the electrochemical properties of CNF. Structural and morphological characterizations of the webs are carried out by using attenuated total reflectance Fourier transform infrared spectroscopy and Raman spectroscopy, scanning electron microscopy, atomic force microscopy and transmission electron microscopy. Mechanical tests are performed with a dynamic mechanical analyzer, and thermal studies are conducted by using thermogravimetric analysis. Electrochemical impedance spectroscopy, and cyclic voltammetry are used to investigate capacitive behavior of the products. The proposed equivalent circuit model was consistent with charge-transfer processes taking place at interior pores filled with electrolyte.

  18. Chemical stability and surface stoichiometry of vanadium oxide phases studied by reactive molecular dynamics simulations

    Science.gov (United States)

    Jeon, Byoungseon; Ko, Changhyun; van Duin, Adri C. T.; Ramanathan, Shriram

    2012-02-01

    Compositional stability of various vanadium oxides and oxide growth on vanadium surfaces have been studied using reactive molecular dynamics simulation methods. Vanadium dioxide (VO2), sesquioxide (V2O3), pentoxide (V2O5), and hexavanadium tridecaoxide (V6O13) are studied in bulk crystalline and thin film structures, investigating charge distribution and pair distribution functions of particle interactions. The stability is estimated to be pentoxide, hexavanadium tridecaoxide, sesquioxide, and dioxide respectively in decreasing order in thin film structures. We then analyze oxide growth kinetics on vanadium (100) and (110) surfaces. The oxidation rate, stoichiometry, charge distribution, and the effect of surface orientation on kinetic phenomena are noted. In the early stages of surface oxidation of our simulation configurations, sesquioxide is found to be the dominant component. The modeling and simulation results are compared with experiments where available.

  19. Trends in Metal Oxide Stability for Nanorods, Nanotubes, and Surfaces

    DEFF Research Database (Denmark)

    Mowbray, Duncan; Martinez, Jose Ignacio; Vallejo, Federico Calle

    2011-01-01

    ,2) nanorods, (3,3) nanotubes, and the (110) and (100) surfaces. These formation energies can be described semiquantitatively (mean absolute error ≈ 0.12 eV) by the fraction of metal−oxygen bonds broken and the metal d-band and p-band centers in the bulk metal oxide.......The formation energies of nanostructures play an important role in determining their properties, including their catalytic activity. For the case of 15 different rutile and 8 different perovskite metal oxides, we used density functional theory (DFT) to calculate the formation energies of (2...

  20. Bismuth Passivation Technique for High-Resolution X-Ray Detectors

    Science.gov (United States)

    Chervenak, James; Hess, Larry

    2013-01-01

    The Athena-plus team requires X-ray sensors with energy resolution of better than one part in 3,000 at 6 keV X-rays. While bismuth is an excellent material for high X-ray stopping power and low heat capacity (for large signal when an X-ray is stopped by the absorber), oxidation of the bismuth surface can lead to electron traps and other effects that degrade the energy resolution. Bismuth oxide reduction and nitride passivation techniques analogous to those used in indium passivation are being applied in a new technique. The technique will enable improved energy resolution and resistance to aging in bismuth-absorber-coupled X-ray sensors. Elemental bismuth is lithographically integrated into X-ray detector circuits. It encounters several steps where the Bi oxidizes. The technology discussed here will remove oxide from the surface of the Bi and replace it with nitridized surface. Removal of the native oxide and passivating to prevent the growth of the oxide will improve detector performance and insulate the detector against future degradation from oxide growth. Placing the Bi coated sensor in a vacuum system, a reduction chemistry in a plasma (nitrogen/hydrogen (N2/H2) + argon) is used to remove the oxide and promote nitridization of the cleaned Bi surface. Once passivated, the Bi will perform as a better X-ray thermalizer since energy will not be trapped in the bismuth oxides on the surface. A simple additional step, which can be added at various stages of the current fabrication process, can then be applied to encapsulate the Bi film. After plasma passivation, the Bi can be capped with a non-diffusive layer of metal or dielectric. A non-superconducting layer is required such as tungsten or tungsten nitride (WNx).

  1. Bismuth bronze from machu picchu, peru.

    Science.gov (United States)

    Gordon, R B; Rutledge, J W

    1984-02-10

    The decorative bronze handle of a tumi excavated at the Inca city of Machu Picchu, Peru, contains 18 percent bismuth and appears to be the first known example of the use of bismuth with tin to make bronze. The alloy is not embrittled by the bismuth because the bismuth-rich constituent does not penetrate the grain boundaries of the matrix phase. The use of bismuth facilitates the duplex casting process by which the tumi was made and forms an alloy of unusual color.

  2. Investigation of iron-bismuth-molybdenum catalysts

    International Nuclear Information System (INIS)

    Ven'yaminov, S.A.; Pitaeva, A.N.; Barannik, G.B.; Plyasova, L.M.; Maksimovskaya, R.I.; Kustova, G.N.

    1977-01-01

    Using the methods of roentgenography, derivatography, EPR-and infrared-spectroscopy, the phase composition of an iron-bismut molybdenum system is investigated. It is shown that the method of introducing iron additives substantially affects the phase composition of the system. Interaction of a mixture of bismuth and iron hydroxides with a molybdic acid solution results in the formation of bismuth and iron molybdates. If iron hydroxide reacts with previously synthesized bismuth molybdate, a compound containing bismuth, molybdenum, and iron (the X-phase) is formed in the specimens along with the bismuth and iron molybdates

  3. Effect of adsorbed polyaniline on the thermal stability of iron and arsenic oxides

    Directory of Open Access Journals (Sweden)

    Robson Fernandes de Farias

    2000-06-01

    Full Text Available Iron and arsenic oxide grains are coated with the conducting organic polymer polyaniline. The obtained samples were characterized by infrared spectroscopy, SEM, conducting measurements and thermogravimetry. The thermal stability of both oxides are increased. For As2O3 the sublimation temperature is increased from 165ºC in the pure oxide to 206ºC in the polymer modified sample. The pure Fe3O4 sample exhibits sublimation at 780ºC whereas the polyaniline coated oxide is stable until at least 1000ºC.

  4. Chemical properties and oxidative stability of Arjan (Amygdalus reuteri) kernel oil as emerging edible oil.

    Science.gov (United States)

    Tavakoli, Javad; Emadi, Teymour; Hashemi, Seyed Mohammad Bagher; Mousavi Khaneghah, Amin; Munekata, Paulo Eduardo Sichetti; Lorenzo, Jose Manuel; Brnčić, Mladen; Barba, Francisco J

    2018-05-01

    The oxidative stability, as well as the chemical composition of Amygdalus reuteri kernel oil (ARKO), were evaluated and compared to those of Amygdalus scoparia kernel oil (ASKO) and extra virgin olive oil (EVOO) during and after holding in the oven (170 °C for 8 h). The oxidative stability analysis was carried out by measuring the changes in conjugated dienes, carbonyl and acid values as well as oil/oxidative stability index and their correlation with the antioxidant compounds (tocopherol, polyphenols, and sterol compounds). The oleic acid was determined as the predominant fatty acid of ARKO (65.5%). Calculated oxidizability value and an iodine value of ARKO, ASKO and EVOO were reported as 3.29 and 3.24, 2.00 and 100.0, 101.4 and 81.9, respectively. Due to the high wax content (4.5% and 3.3%, respectively), the saponification number of ARKO and ASKO (96.4 and 99.8, respectively) was lower than that of EVOO (169.7). ARKO had the highest oxidative stability, followed by ASKO and EVOO. Therefore, ARKO can be introduced as a new source of edible oil with high oxidative stability. Copyright © 2018. Published by Elsevier Ltd.

  5. Effects of iron-aluminium oxides and organic carbon on aggregate stability of bauxite residues.

    Science.gov (United States)

    Zhu, Feng; Li, Yubing; Xue, Shengguo; Hartley, William; Wu, Hao

    2016-05-01

    In order to successfully establish vegetation on bauxite residue, properties such as aggregate structure and stability require improvement. Spontaneous plant colonization on the deposits in Central China over the last 20 years has revealed that natural processes may improve the physical condition of bauxite residues. Samples from three different stacking ages were selected to determine aggregate formation and stability and its relationship with iron-aluminium oxides and organic carbon. The residue aggregate particles became coarser in both dry and wet sieving processes. The mean weight diameter (MWD) and geometry mean diameter (GMD) increased significantly, and the proportion of aggregate destruction (PAD) decreased. Natural stacking processes could increase aggregate stability and erosion resistant of bauxite residues. Free iron oxides and amorphous aluminium oxides were the major forms in bauxite residues, but there was no significant correlation between the iron-aluminium oxides and aggregate stability. Aromatic-C, alkanes-C, aliphatic-C and alkenes-C were the major functional groups present in the residues. With increasing stacking age, total organic carbon content and aggregate-associated organic carbon both increased. Alkanes-C, aliphatic-C and alkenes-C increased and were mainly distributed in macro-aggregates, whereas aromatic-C was mainly distributed in aluminium oxides maybe more important for stability of micro-aggregates.

  6. Oxidative Stability and Shelf Life of Food Emulsions

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte

    2016-01-01

    Lipid oxidation and antioxidant effects in food emulsions are influenced by many different factors, such as the composition of the aqueous phase and interface, the partitioning of the antioxidants between the different phases of the emulsion system, the antioxidant properties, and others. This ch...

  7. An approach to analyzing synthesis, structure and properties of bismuth titanate ceramics

    Directory of Open Access Journals (Sweden)

    Lazarević Z.

    2005-01-01

    Full Text Available The family of bismuth titanate, Bi4Ti3O12 (BIT layered-structured ferroelectrics materials is attractive from the viewpoint of their application as electronic materials such as dielectrics, piezoelectrics and pyroelectrics, because they are characterized by good stability of piezoelectric properties, a high Curie temperature and a good resistance vs temperature. Bismuth titanate (Bi4Ti3O12 powders can be prepared using different methods, depending if the creation will be film coating or ceramics. The structure and properties of bismuth titanate materials show a significance dependence on the applied synthesis method. In this review paper, we made an attempt to give an approach to analyzing the structure, synthesis methods and properties of bismuth titanate ferroelectrics materials. .

  8. Stability of Ruddlesden–Popper-structured oxides in humid conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lehtimäki, M.; Yamauchi, H.; Karppinen, M., E-mail: maarit.karppinen@aalto.fi

    2013-08-15

    Some of layered transition-metal oxides are known to react with atmospheric humidity to form through topotactic intercalation reactions new water-containing layered structures. Here we investigate the influence of oxygen content (7−δ) of the Ruddlesden–Popper-structured Sr{sub 3}FeMO{sub 7−δ} (M=Ni, Mn, Ti) oxides on the water-intercalation reaction. It is found that their oxygen contents influence greatly the reactivity of the phases with water. Other factors possibly affecting the reactivity are discussed on the basis of the present data in combination with a comprehensive review of previous works on Ruddlesden–Popper and related layered oxide phases. - Graphical abstract: Many of the Ruddlesden–Popper-structured A{sub 3}B{sub 2}O{sub 7−δ} oxides readily react with water via intercalation reactions. Three possible factors affecting the water intercalation are identified: oxygen content of the phase, ionic radius of cation A and valence state of cation B. The resultant layered water-derivative phases can be categorised into two groups, depending on the crystal symmetry of the phase. Highlights: • Ruddlesden–Popper oxides A{sub 3}B{sub 2}O{sub 7−δ} often accommodate water via intercalation reaction. • The lower the oxygen content 7−δ is the more readily the intercalation reaction occurs. • The second factor promoting the reaction is the large size of cation A. • The third possible factor is the high valence state of cation B. • Resultant water-derivatives can be categorised into two groups depending on symmetry.

  9. Stability of Ruddlesden–Popper-structured oxides in humid conditions

    International Nuclear Information System (INIS)

    Lehtimäki, M.; Yamauchi, H.; Karppinen, M.

    2013-01-01

    Some of layered transition-metal oxides are known to react with atmospheric humidity to form through topotactic intercalation reactions new water-containing layered structures. Here we investigate the influence of oxygen content (7−δ) of the Ruddlesden–Popper-structured Sr 3 FeMO 7−δ (M=Ni, Mn, Ti) oxides on the water-intercalation reaction. It is found that their oxygen contents influence greatly the reactivity of the phases with water. Other factors possibly affecting the reactivity are discussed on the basis of the present data in combination with a comprehensive review of previous works on Ruddlesden–Popper and related layered oxide phases. - Graphical abstract: Many of the Ruddlesden–Popper-structured A 3 B 2 O 7−δ oxides readily react with water via intercalation reactions. Three possible factors affecting the water intercalation are identified: oxygen content of the phase, ionic radius of cation A and valence state of cation B. The resultant layered water-derivative phases can be categorised into two groups, depending on the crystal symmetry of the phase. Highlights: • Ruddlesden–Popper oxides A 3 B 2 O 7−δ often accommodate water via intercalation reaction. • The lower the oxygen content 7−δ is the more readily the intercalation reaction occurs. • The second factor promoting the reaction is the large size of cation A. • The third possible factor is the high valence state of cation B. • Resultant water-derivatives can be categorised into two groups depending on symmetry

  10. Monitoring of butter and animal fat oxidation stability by differential scanning calorimetry (DSC

    Directory of Open Access Journals (Sweden)

    Jasminka Sadadinović

    2005-07-01

    Full Text Available Oxidation of fat is one of the basic reactions which causes the depletion of butter and animal fat quality as well as other products containing them. Since the most of reaction products of fat oxidation are harmful for consumers' health, inadequate and scarce monitoring of edible fats and fat containing products quality, presents increased health risk as well as financial loss for the producers. In fat oxidation stability estimation, standard chemical methods were used (iodine number, acid number, peroxide number, anisidine number etc., which require time and chemical usage. Differential scanning calorimetry (DSC analysis presents the simple and efficient way for butter and animal fats oxidation stability estimation. Laboratory investigations were performed to monitor oxidation stability of butter and animal fat in fresh state, as well as in spent phase, used in frying process. The results obtained were compared to the results of standard chemical analysis, and they confirmed the reproducibility and applicability of differential scanning calorimetry in oxidation stability of butter and animal fats monitoring.

  11. Color stability of white mineral trioxide aggregate in contact with hypochlorite solution.

    Science.gov (United States)

    Camilleri, Josette

    2014-03-01

    One of the uses of white mineral trioxide aggregate (MTA) is as an apical barrier in immature teeth. Although this treatment has been reported to have high success rates, a number of cases of discoloration have been noted. The aim of this research was to investigate the color stability of white MTA in contact with various solutions used in endodontics. The change in color of white MTA after immersion in water, sodium hypochlorite, or hydrogen peroxide was assessed by viewing the color change on digital photographs and also by using a spectrophotometer. White MTA, white Portland cement, and bismuth oxide were assessed. The changes in the material after immersion in the different solutions were assessed by x-ray diffraction analysis and Fourier transform infrared spectroscopy. Immersion of white MTA and bismuth oxide in sodium hypochlorite resulted in the formation of a dark brown discoloration. This change was not observed in Portland cement. X-ray diffraction analysis and Fourier transform infrared analysis displayed the reduction of sodium hypochlorite in contact with bismuth oxide and MTA to sodium chloride. Contact of white MTA and other bismuth-containing materials with sodium hypochlorite solution should be avoided. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  12. Aluminium bismuthate nanorods and the electrochemical performance for detection of tartaric acid

    Energy Technology Data Exchange (ETDEWEB)

    Pei, L.Z., E-mail: lzpei@ahut.edu.cn [Key Lab of Materials Science and Processing of Anhui Province, School of Materials Science and Engineering, Anhui University of Technology, Ma' anshan, Anhui 243002 (China); Wei, T.; Lin, N.; Fan, C.G. [Key Lab of Materials Science and Processing of Anhui Province, School of Materials Science and Engineering, Anhui University of Technology, Ma' anshan, Anhui 243002 (China); Yang, Zao, E-mail: yangzao888@tom.com [National Engineering Research Center for Biomaterials, Sichuan University, Chengdu, Sichuan 610064 (China)

    2016-09-15

    Aluminium bismuthate nanorods had been synthesized by a facile hydrothemral method. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations showed that the lengh and diameter were 2–10 μm and 50–200 nm, respectively. X-ray diffraction (XRD) and high-resolution TEM (HRTEM) showed that the nanorods were composed of single crystalline orthorhombic Al{sub 4}Bi{sub 2}O{sub 9} phase. The aluminium bismuthate nanorods could be explained by the nucleation and crystalline growth process based on the products obtained from different hydrothermal conditions. Aluminium bismuthate nanorods modified glassy carbon electrode (GCE) was fabricated for the electrochemical detection of tartaric acid (TA) in neutral solution. A pair of semi-reversible redox peaks located at −0.08 V and −0.53 V, respectively were observed. The current intensity of the cyclic voltammogram (CV) peak increased linearly obviously with increasing the scan rate and TA concentration. The detection limit and linear range were 0.64 μM and 0.001–2 mM, respectively with the correlation coefficient of 0.995. The aluminium bismuthate nanorods modified GCE had good reproducibility and stability for the detection of TA. - Highlights: • Aluminium bismuthate nanorods were synthesized by a facile hydrothermal process. • The size of aluminium bismuthate nanorods could be controlled by growth conditions. • Aluminium bismuthate nanorods showed good electrochemical performance for the detection of tartaric acid. • Aluminium bismuthate nanorods modified GCE had good reproducibility and stability.

  13. Graphene oxide immobilized enzymes show high thermal and solvent stability

    Czech Academy of Sciences Publication Activity Database

    Hermanová, S.; Zarevúcka, Marie; Bouša, D.; Pumera, M.; Sofer, Z.

    2015-01-01

    Roč. 7, č. 13 (2015), s. 5852-5858 ISSN 2040-3364 R&D Projects: GA ČR(CZ) GA15-09001S Grant - others:GA AV ČR(CZ) M200551203 Institutional support : RVO:61388963 Keywords : graphene oxide * lipase * immobilization Subject RIV: CC - Organic Chemistry Impact factor: 7.760, year: 2015 http://pubs.rsc.org/en/content/articlepdf/2015/nr/c5nr00438a

  14. Vanadium oxide monolayer catalysts. I. Preparation, characterization, and thermal stability

    NARCIS (Netherlands)

    Roozeboom, F.; Fransen, T.; Mars, P.; Gellings, P.J.

    1979-01-01

    Vanadium oxide catalysts of the monolayer type have been prepared by means of chemisorption of vanadate(V)-anions from aqueous solutions and by chemisorption of gaseous V2O3(OH)4. Using Al2O3, Cr2O3, TiO2, CeO2 and ZrO2, catalysts with an approximately complete monomolecular layer of vanadium(V)

  15. Oxidative stability of refrigerated fish pates containing loquat seed extract

    Directory of Open Access Journals (Sweden)

    Jaqueline Piccolo

    2014-09-01

    Full Text Available This study investigated the effects of hydroethanolic E. japonica seed extracts (EJSE as inhibitors of lipid and protein oxidation on fish pates subjected to refrigerated storage. Five fish pate formulations were developed. These formulations included two control pates (water-control and ascorbic acid-control and three pates with added EJSE (0.1, 0.2 and 0.4g of seed 100g-1 product, equivalent to 3.4, 6.8 or 13.6mg phenolic compounds kg-1 product, which were then stored under refrigeration for 35 days. Conjugated dienes (CD and peroxide (PV values increased along with the storage time; however, these values decreased and were similar among all samples at the end of 35 days of analysis (P<0.05. However, the thiobarbituric acid reactive substances levels (TBARS did not change along the storage and were not affected by the EJSE. Additionally, there was a linear increase in the protein carbonyl content of fish pates over the storage period (P<0.05, but no effect of EJSE on protein oxidation. The results show that, at the concentrations evaluated, hydroethanolic E. japonica seed extract was unable to inhibit or reduce lipid and protein oxidation in fish pates, but the observed phenolic content emphasizes the need for further studies on the wastes of this fruit.

  16. Chemical stabilization of metals and arsenic in contaminated soils using oxides – A review

    International Nuclear Information System (INIS)

    Komárek, Michael; Vaněk, Aleš; Ettler, Vojtěch

    2013-01-01

    Oxides and their precursors have been extensively studied, either singly or in combination with other amendments promoting sorption, for in situ stabilization of metals and As in contaminated soils. This remediation option aims at reducing the available fraction of metal(loid)s, notably in the root zone, and thus lowering the risks associated with their leaching, ecotoxicity, plant uptake and human exposure. This review summarizes literature data on mechanisms involved in the immobilization process and presents results from laboratory and field experiments, including the subsequent influence on higher plants and aided phytostabilization. Despite the partial successes in the field, recent knowledge highlights the importance of long-term and large-scale field studies evaluating the stability of the oxide-based amendments in the treated soils and their efficiency in the long-term. - In situ stabilization of metals and As in contaminated soils using oxides combined with phytostabilization is a potential alternative to conventional remediation techniques.

  17. Oxidative stability of structured lipids produced from sunflower oil and caprylic acid

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Xu, Xuebing; Nielsen, Nina Skall

    2003-01-01

    a commercial antioxidant blend Grindox 117 (propyl gallate/citric acid/ascorbyl palmitate) or gallic acid to the SL was investigated. The lipid type affected the oxidative stability: SL was less stable than SO and RL. The reduced stability was most likely caused by both the structure of the lipid...... and differences in production/purification, which caused lower tocopherol content and higher initial levels of primary and secondary oxidation products in SL compared with RL and SO. Grindox 117 and gallic acid did not exert a distinct antioxidative effect in the SL oil samples during storage......Traditional sunflower oil (SO), randomized lipid (RL) and specific structured lipid (SL), both produced from SO and tricaprylin/caprylic acid, respectively, were stored for up to 12 wk to compare their oxidative stabilities by chemical and sensory analyses. Furthermore, the effect of adding...

  18. Improving the oxidative stability of a high redox potential fungal peroxidase by rational design.

    Directory of Open Access Journals (Sweden)

    Verónica Sáez-Jiménez

    Full Text Available Ligninolytic peroxidases are enzymes of biotechnological interest due to their ability to oxidize high redox potential aromatic compounds, including the recalcitrant lignin polymer. However, different obstacles prevent their use in industrial and environmental applications, including low stability towards their natural oxidizing-substrate H2O2. In this work, versatile peroxidase was taken as a model ligninolytic peroxidase, its oxidative inactivation by H2O2 was studied and different strategies were evaluated with the aim of improving H2O2 stability. Oxidation of the methionine residues was produced during enzyme inactivation by H2O2 excess. Substitution of these residues, located near the heme cofactor and the catalytic tryptophan, rendered a variant with a 7.8-fold decreased oxidative inactivation rate. A second strategy consisted in mutating two residues (Thr45 and Ile103 near the catalytic distal histidine with the aim of modifying the reactivity of the enzyme with H2O2. The T45A/I103T variant showed a 2.9-fold slower reaction rate with H2O2 and 2.8-fold enhanced oxidative stability. Finally, both strategies were combined in the T45A/I103T/M152F/M262F/M265L variant, whose stability in the presence of H2O2 was improved 11.7-fold. This variant showed an increased half-life, over 30 min compared with 3.4 min of the native enzyme, under an excess of 2000 equivalents of H2O2. Interestingly, the stability improvement achieved was related with slower formation, subsequent stabilization and slower bleaching of the enzyme Compound III, a peroxidase intermediate that is not part of the catalytic cycle and leads to the inactivation of the enzyme.

  19. Oxidative stability of fish oil-enriched mayonnaise-based salads

    DEFF Research Database (Denmark)

    Sørensen, Ann-Dorit Moltke; Nielsen, Nina Skall; Jacobsen, Charlotte

    2010-01-01

    The oxidative stability of fish oil-enriched mayonnaise-based salads and the influence of different vegetables in shrimp and tuna salads were evaluated. Moreover, the lipid oxidation in the presence of 1% oregano, rosemary, or thyme in fish oil-enriched tuna salad was assessed. The results obtained...... showed that the mayonnaise itself was more oxidatively stable without vegetables and tuna or shrimp, in spite of the higher oil content in mayonnaise (63 and 6.3% fish oil, respectively) compared to salads (∼24 and 2.4% fish oil, respectively). Surprisingly, the fish oil-enriched mayonnaise was only...... significantly different from the standard mayonnaise in the volatile concentration during the end of storage. In fish oil-enriched shrimp salad, asparagus had an anti-oxidative effect and shrimp a pro-oxidative effect, where the anti-oxidative effect of asparagus was strong enough to prevent the pro...

  20. LiCl/PVA gel electrolyte stabilizes vanadium oxide nanowire electrodes for pseudocapacitors.

    Science.gov (United States)

    Wang, Gongming; Lu, Xihong; Ling, Yichuan; Zhai, Teng; Wang, Hanyu; Tong, Yexiang; Li, Yat

    2012-11-27

    Here we report a new strategy to improve the electrochemical stability of vanadium oxide electrodes for pseudocapacitors. Vanadium oxides are known to suffer from severe capacitance loss during charging/discharging cycling, due to chemical dissolution and ion intercalation/deintercalation-induced material pulverization. We demonstrate that these two issues can be addressed by using a neutral pH LiCl/PVA gel electrolyte. The function of the gel electrolyte is twofold: (i) it reduces the chemical dissolution of amphoteric vanadium oxides by minimizing water content and providing a neutral pH medium and (ii) it serves as a matrix to maintain the vanadium oxide nanowire network structure. Vanadium oxide nanowire pseudocapacitors with gel electrolyte exhibit excellent capacitance retention rates of more than 85% after cycling for 5000 cycles, without sacrificing the electrochemical performance of vanadium oxides.

  1. Stabilization of ultrathin (hydroxy)oxide films on transition metal substrates for electrochemical energy conversion

    Science.gov (United States)

    Zeng, Zhenhua; Chang, Kee-Chul; Kubal, Joseph; Markovic, Nenad M.; Greeley, Jeffrey

    2017-06-01

    Design of cost-effective electrocatalysts with enhanced stability and activity is of paramount importance for the next generation of energy conversion systems, including fuel cells and electrolysers. However, electrocatalytic materials generally improve one of these properties at the expense of the other. Here, using density functional theory calculations and electrochemical surface science measurements, we explore atomic-level features of ultrathin (hydroxy)oxide films on transition metal substrates and demonstrate that these films exhibit both excellent stability and activity for electrocatalytic applications. The films adopt structures with stabilities that significantly exceed bulk Pourbaix limits, including stoichiometries not found in bulk and properties that are tunable by controlling voltage, film composition, and substrate identity. Using nickel (hydroxy)oxide/Pt(111) as an example, we further show how the films enhance activity for hydrogen evolution through a bifunctional effect. The results suggest design principles for this class of electrocatalysts with simultaneously enhanced stability and activity for energy conversion.

  2. Preparation of polyvinyl alcohol graphene oxide phosphonate film and research of thermal stability and mechanical properties.

    Science.gov (United States)

    Li, Jihui; Song, Yunna; Ma, Zheng; Li, Ning; Niu, Shuai; Li, Yongshen

    2018-05-01

    In this article, flake graphite, nitric acid, peroxyacetic acid and phosphoric acid are used to prepare graphene oxide phosphonic and phosphinic acids (GOPAs), and GOPAs and polyvinyl alcohol (PVA) are used to synthesize polyvinyl alcohol graphene oxide phosphonate and phosphinate (PVAGOPs) in the case of faint acidity and ultrasound irradiation, and PVAGOPs are used to fabricate PVAGOPs film, and the structure and morphology of GOPAs, PVAGOPs and PVAGOPs film are characterized, and the thermal stability and mechanical properties of PVAGOPs film are investigated. Based on these, it has been proved that GOPAs consist of graphene oxide phosphonic acid and graphene oxide phosphinic acid, and there are CP covalent bonds between them, and PVAGOPs are composed of GOPAs and PVA, and there are six-member lactone rings between GOPAs and PVA, and the thermal stability and mechanical properties of PVAGOPs film are improved effectively. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. Effect of ingredients on oxidative stability of fish oil-enriched drinking yoghurt

    DEFF Research Database (Denmark)

    Nielsen, Nina Skall; Klein, Anna; Jacobsen, Charlotte

    2009-01-01

    , pectin, citric acid or gluconodelta- lactone did not affect the oxidative stability of fish oil-enriched yoghurt emulsions. Furthermore, the fruit preparation and added sugar did not lead to increased antioxidative activity. It is concluded that yoghurt as the dairy component in the fish oil......The oxidative stabilities of fish oil-enriched milk and fish oil-enriched drinking yoghurt were compared by following the development of lipid oxidation in plain milk, plain yoghurt and yoghurt to which ingredients present in drinking yoghurt were added one by one. All samples were enriched with 1...... wt-% fish oil. After 3 weeks of storage, development of peroxide values, volatile secondary oxidation products and fishy offflavors were much more pronounced in the milk compared to any of the yoghurt samples, irrespective of any added ingredients used to prepare flavored drinking yoghurt. Thus...

  4. In vitro cytotoxicity of iron oxide nanoparticles: effects of chitosan and polyvinyl alcohol as stabilizing agents

    Science.gov (United States)

    Tran, Phong A.; Nguyen, Hiep T.; Fox, Kate; Tran, Nhiem

    2018-03-01

    Iron oxide magnetic nanoparticles have significant potential in biomedical applications such as in diagnosis, imaging and therapeutic agent delivery. The choice of stabilizers and surface functionalization is important as it is known to strongly influence the cytotoxicity of the nanoparticles. The present study aimed at investigating the effects of surface charges on the cytotoxicity of iron oxide nanoparticles. We used a co-precipitation method to synthesize iron oxide nanoparticles which were then stabilized with either chitosan (CS) or polyvinyl alcohol (PVA) which have net positive charge and zero charge at physiological pH, respectively. The nanoparticles were characterized in terms of size, charges and chemical oxidation state. Cytotoxicity of the nanoparticles was assessed using mouse fibroblast cells and was correlated with surface charges of the nanoparticles and their aggregation.

  5. Microwave-induced Bismuth Salts-mediated Synthesis of Molecules of Medicinal Interests.

    Science.gov (United States)

    Bandyopadhyay, Debasish; Chavez, Ashlee; Banik, Bimal K

    2017-01-01

    Bismuth salts-mediated reactions have become a powerful tool for the synthesis of diverse medicinally-significant compounds because of their low-toxicity (non-toxic) and Lewis acidic capacity. In fact, LD50 of bismuth nitrate is lower than table salt. On the other hand, microwave-induced chemical synthesis is considered as a major greener route in modern chemistry. A total of 139 publications (including a few authentic web links) have been reviewed mainly to discuss bismuth salts-induced electrophilic aromatic substitution, protection-deprotection chemistry of carbonyl compounds, enamination, oxidation, carbohydrate chemistry, hydrolysis, addition-elimination route, Paal-Knorr reaction, Clauson-kaas synthesis, Michael addition, aza-Michael addition, Hantzsch reaction, Biginelli reaction, Ferrier rearrangement, Pechmann condensation, Diels-Alder and aza-Diels- Alder reactions, as well as effects of microwave irradiation in a wide range of chemical transformations. Bismuth salts-mediated reactions are developed for the synthesis of diverse organic molecules of medicinal significance. Reactions conducted with bismuth salts are environmentally benign, economical, rapid and high yielding. Microwave irradiation has accelerated these reactions significantly. It is believed that bismuth salts released corresponding acids in the media during the reaction. However, a coordination of bismuth salt to the electronegative atom is also observed in the NMR study. Bismuth has much less control (less attractive forces) over anions (for example, halides, nitrate, sulfate and triflates) compared to alkali metals. Therefore, it forms weak bond with electronegative atoms more readily and facilitates the reactions significantly. Many products obtained via bismuth salts-mediated reactions are medicinally active or intermediate for the synthesis of biologically active molecules including antifungal, anti-parasitic, anticancer and antibacterial agents, as well as agents to prevent

  6. Air, aqueous and thermal stabilities of Ce3+ ions in cerium oxide nanoparticle layers with substrates

    KAUST Repository

    Naganuma, Tamaki

    2014-01-01

    Abundant oxygen vacancies coexisting with Ce3+ ions in fluorite cerium oxide nanoparticles (CNPs) have the potential to enhance catalytic ability, but the ratio of unstable Ce3+ ions in CNPs is typically low. Our recent work, however, demonstrated that the abundant Ce3+ ions created in cerium oxide nanoparticle layers (CNPLs) by Ar ion irradiation were stable in air at room temperature. Ce valence states in CNPs correlate with the catalytic ability that involves redox reactions between Ce3+ and Ce4+ ions in given application environments (e.g. high temperature in carbon monoxide gas conversion and immersion conditions in biomedical applications). To better understand the mechanism by which Ce3+ ions achieve stability in CNPLs, we examined (i) extra-long air-stability, (ii) thermal stability up to 500 °C, and (iii) aqueous stability of Ce 3+ ions in water, buffer solution and cell culture medium. It is noteworthy that air-stability of Ce3+ ions in CNPLs persisted for more than 1 year. Thermal stability results showed that oxidation of Ce 3+ to Ce4+ occurred at 350 °C in air. Highly concentrated Ce3+ ions in ultra-thin CNPLs slowly oxidized in water within 1 day, but stability was improved in the cell culture medium. Ce 3+ stability of CNPLs immersed in the medium was associated with phosphorus adsorption on the Ce3+ sites. This study also illuminates the potential interaction mechanisms of stable Ce3+ ions in CNPLs. These findings could be utilized to understand catalytic mechanisms of CNPs with abundant oxygen vacancies in their application environments. © The Royal Society of Chemistry 2014.

  7. Effect of yttria addition on the stability of porous chromium oxide ceramics in supercritical water

    International Nuclear Information System (INIS)

    Dong Ziqiang; Chen Weixing; Zheng Wenyue; Guzonas, Dave

    2013-01-01

    Porous chromium oxide (Cr 2 O 3 ) ceramics were prepared by oxidizing highly porous chromium carbides that were obtained by a reactive sintering method, and were evaluated at temperatures ranging from 375 °C to 625 °C in supercritical water (SCW) environments with a fixed pressure of 25–30 MPa. Reactive element yttrium was introduced to the porous oxide ceramic by adding various amounts of yttria of 5, 10 and 20 wt.%, respectively, prior to reactive sintering. The exposure in SCW shows that the porous chromium oxide is quite stable in SCW at 375 °C. However, the stability decreased with increasing temperature. It is well known that chromium oxide can be oxidized to soluble chromium (VI) species in SCW when oxygen is present. Adding yttria increases the stability of chromium oxide in SCW environments. However, adding yttria higher than 5 wt.% increased the weight loss of porous chromium oxide samples because of the direct dissociation of Y 2 O 3 in SCW.

  8. Synthesis of biolubricants with high viscosity and high oxidation stability

    Directory of Open Access Journals (Sweden)

    Bondioli Paolo

    2003-03-01

    Full Text Available The synthetic procedure as well as the main properties of obtained products of a group of complex esters are reported here. Complex esters were prepared using low molecular weight saturated fatty acids, trimethylolpropane and a dicarboxylic acid as a feedstock. By means of this procedure it is possible to obtain products having high viscosity and very good lubricating, thermal and cold properties. Thanks to the absence of unsaturations into the ester also the oxidation property is good, opening several application perspective for these products which are partly prepared from renewable source.

  9. Oxidative stability, thermal stability and acceptability of coconut oil flavored with essential oils from black pepper and ginger.

    Science.gov (United States)

    Chandran, Janu; Nayana, N; Roshini, N; Nisha, P

    2017-01-01

    The present study investigates the oxidative and thermal stability of flavoured oils developed by incorporating essential oils from black pepper and ginger to coconut oil (CNO) at concentrations of 0.1 and 1.0% (CNO P-0.1 , CNO P-1 , CNO G-0.1 , CNO G-1 ). The stability of oils were assessed in terms of free fatty acids, peroxide, p -anisidine, conjugated diene and triene values and compared with CNO without any additives and a positive control with synthetic antioxidant TBHQ (CNO T ). It was found that the stability of CNO P-1 and CNO G-1 were comparable with CNO T at both study conditions. The possibility of flavoured oil as a table top salad oil was explored by incorporating the same in vegetable salad and was found more acceptable than the control, on sensory evaluation. The synergetic effect of essential oil as a flavour enhancer and a powerful natural antioxidant that can slow down the oxidation of fats was established in the study.

  10. The effect of pre-oxidation treatments on the oxidation tolerance of Ni-yttria-stabilized zirconia anodes in solid oxide fuel cells

    Science.gov (United States)

    Young, J. L.; Molero, H.; Birss, V. I.

    2014-12-01

    When a Ni-YSZ (yttria-stabilized zirconia) anode-supported solid oxide fuel cell (SOFC) is exposed to air at high temperatures, the outcome can be catastrophic cell degradation (primarily YSZ electrolyte cracking), resulting from the 70% volume expansion of Ni as it forms NiO. Earlier work showed that the damage is less severe under conditions when no gradient in the NiO content into the Ni-YSZ support layer was allowed to develop during the oxidation process (e.g., oxidation at 600 °C). This was correlated with qualitative scanning electron microscopy observations, showing that NiO particles are ejected out of the Ni-YSZ/air surface. In the present work, XPS analysis confirmed the enrichment of NiO at the outer anode surface, suggesting that it may be possible to pre-oxidize the Ni-YSZ support layer at 600 °C to force some NiO out onto the anode surface and thus enhance cell oxidation tolerance. It is shown here that, following pre-oxidation at 600 °C, the amount of Ni oxidation tolerated prior to electrolyte cracking at 600 °C increased from 75% to 80%. For oxidation at 800 °C, following pre-oxidation at 600 °C, electrolyte cracking was less severe, but cracks still appeared before 50% of the Ni in the anode was oxidized.

  11. Oxidative stability of mayonnaise containing structured lipids produced from sunflower oil and caprylic acid

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Xu, Xuebing; Nielsen, Nina Skall

    2003-01-01

    . Furthermore, the potential antioxidative effect of adding lactoferrin, propyl gallate or EDTA to the mayonnaise with SL was also investigated. Mayonnaise based on SL oxidized faster than mayonnaise based on RL or SO. The reduced oxidative stability in the SL mayonnaise could not be ascribed to a single factor...... gallate and lactoferrin did not exert any antioxidative effect in the SL mayonnaise......, but was most likely influenced by the structure of the lipid, the lower tocopherol content and the higher initial levels of lipid hydroperoxides and secondary volatile oxidation compounds in the SL itself compared with the RL and traditional sunflower oil employed. EDTA was a strong antioxidant, while propyl...

  12. Preparation and Application of Water-in-Oil Emulsions Stabilized by Modified Graphene Oxide

    Directory of Open Access Journals (Sweden)

    Xiaoma Fei

    2016-08-01

    Full Text Available A series of alkyl chain modified graphene oxides (AmGO with different alkyl chain length and content was fabricated using a reducing reaction between graphene oxide (GO and alkyl amine. Then AmGO was used as a graphene-based particle emulsifier to stabilize Pickering emulsion. Compared with the emulsion stabilized by GO, which was oil-in-water type, all the emulsions stabilized by AmGO were water-in-oil type. The effects of alkyl chain length and alkyl chain content on the emulsion properties of AmGO were investigated. The emulsions stabilized by AmGO showed good stability within a wide range of pH (from pH = 1 to pH = 13 and salt concentrations (from 0.1 to 1000 mM. In addition, the application of water-in-oil emulsions stabilized by AmGO was investigated. AmGO/polyaniline nanocomposite (AmGO/PANi was prepared through an emulsion approach, and its supercapacitor performance was investigated. This research broadens the application of AmGO as a water-in-oil type emulsion stabilizer and in preparing graphene-based functional materials.

  13. Determination of the oxidative stability by DSC of vegetable oils from the Amazonian area.

    Science.gov (United States)

    Pardauil, Juliana J R; Souza, Luiz K C; Molfetta, Fábio A; Zamian, José R; Rocha Filho, Geraldo N; da Costa, C E F

    2011-05-01

    Differential scanning calorimetry (DSC) and a Rancimat method apparatus were applied to evaluate the oxidative stability of buriti pulp oil (Mauritia flexuosa Mart), rubber seed oil (Hevea brasiliensis), and passion fruit oil (Passiflora edulis). The Rancimat measurements taken for the oxidative induction times were performed under isothermal conditions at 100°C and in an air atmosphere. The DSC technique involved the oxidation of oil samples in an oxygen-flow DSC cell. The DSC cell temperature was set at five different isothermal temperatures: 100, 110, 120, 130 and 140°C. During the oxidation reaction, an increase in heat was observed as a sharp exothermic curve. The value T(0) represents the oxidative induction time, which is determined from the downward extrapolated DSC oxidative curve verses the time axis. These curves indicate a good correlation between the DSC T(0) and oxidative stability index (OSI) values. The DSC method is useful because it consumes less time and less sample. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. Phase stability of oxide dispersion-strengthened ferritic steels in neutron irradiation

    International Nuclear Information System (INIS)

    Yamashita, S.; Oka, K.; Ohnuki, S.; Akasaka, N.; Ukai, S.

    2002-01-01

    Oxide dispersion-strengthened ferritic steels were irradiated by neutrons up to 21 dpa and studied by microstructural observation and microchemical analysis. The original high dislocation density did not change after neutron irradiation, indicating that the dispersed oxide particles have high stability under neutron irradiation. However, there is potential for recoil resolution of the oxide particles due to ballistic ejection at high dose. From the microchemical analysis, it was implied that some of the complex oxides have a double-layer structure, such that TiO 2 occupied the core region and Y 2 O 3 the outer layer. Such a structure may be more stable than the simple mono-oxides. Under high-temperature irradiation, Laves phase was the predominant precipitate occurring at grain boundaries α phase and χ phase were not observed in this study

  15. Aspects of the magmatic geochemistry of bismuth

    Science.gov (United States)

    Greenland, L.P.; Gottfried, D.; Campbell, E.Y.

    1973-01-01

    Bismuth has been determined in 74 rocks from a differentiated tholeiitic dolerite, two calc-alkaline batholith suites and in 66 mineral separates from one of the batholiths. Average bismuth contents, weighted for rock type, of the Great Lake (Tasmania) dolerite, the Southern California batholith and the Idaho batholith are, 32, 50 and 70 ppb respectively. All three bodies demonstrate an enrichment of bismuth in residual magmas with magmatic differentiation. Bismuth is greatly enriched (relative to the host rock) in the calcium-rich accessory minerals, apatite and sphene, but other mineral analyses show that a Bi-Ca association is of little significance to the magmatic geochemistry of bismuth. Most of the bismuth, in the Southern California batholith at least, occurs in a trace mineral phase (possibly sulfides) present as inclusions in the rock-forming minerals. ?? 1973.

  16. Adhesion properties and stability to thermal oxidation of irradiated copolymers of ethylene with vinyl acetate

    International Nuclear Information System (INIS)

    Ovechkina, G.I.; Soboleva, N.S.; Naumkina, S.I.; Ovechkin, P.L.; Leshchenko, S.S.; Finkel', Eh.Eh.; Karpov, V.L.

    1981-01-01

    Effect of gamma radiation on adhesion strength and stability to thermal oxidation of copolymers of ethylene with vinyl acetate of different composition is considered. Polyetiylene, PVC-plasticized substance copper are used as substrates. Optimum radiation doses for copolymers of different composition are determined [ru

  17. Electrochemical stability and transformations of fluorinated poly(2,6-dimethyl-1,4-phenylene oxide)

    NARCIS (Netherlands)

    Pud, A.A.; Rogalsky, S.P.; Ghapoval, G.S.; Kharitonov, A.P.; Kemperman, Antonius J.B.

    2000-01-01

    Fluorination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) leads to narrowing of its window of electrochemical stability in a cathodic range of potentials. It is found this is connected with appearance of both perfluorinated and incompletely fluorinated units in the polymer. The former units are

  18. Effect of the method of processing on quality and oxidative stability ...

    African Journals Online (AJOL)

    In this study four samn samples prepared from cow milk using two processing methods (traditional T1, T2 and factory processed T3, T4) were investigated for their physico-chemical properties, fatty acids composition, oxidative stability and sensory properties. The traditionally processed samples showed a significance ...

  19. Homogenization Pressure and Temperature Affect Protein Partitioning and Oxidative Stability of Emulsions

    DEFF Research Database (Denmark)

    Horn, Anna Frisenfeldt; Barouh, Nathalie; Nielsen, Nina Skall

    2013-01-01

    The oxidative stability of 10 % fish oil-in-water emulsions was investigated for emulsions prepared under different homogenization conditions. Homogenization was conducted at two different pressures (5 or 22.5 MPa), and at two different temperatures (22 and 72 °C). Milk proteins were used as the ...

  20. Oxidative stability of milk drinks containing structured lipids produced from sunflower oil and caprylic acid

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Xu, Xuebing; Nielsen, Nina Skall

    2003-01-01

    Milk drinks containing 5% traditional sunflower oil (SO), randomized lipid (RL) or specific structured lipid (SL) (both produced from SO and tricaprylin/caprylic acid) were compared with respect to their particle size, viscosity and oxidative stability during storage. Furthermore, the effect...

  1. Oxidative stability of structured lipids produced from sunflower oil and caprylic acid

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Xu, Xuebing; Nielsen, Nina Skall

    2003-01-01

    Traditional sunflower oil (SO), randomized lipid (RL) and specific structured lipid (SL), both produced from SO and tricaprylin/caprylic acid, respectively, were stored for up to 12 wk to compare their oxidative stabilities by chemical and sensory analyses. Furthermore, the effect of adding...

  2. Effect of hesperidin dietary supplementation on hen performance, egg quality and yolk oxidative stability.

    Science.gov (United States)

    Goliomytis, M; Orfanou, H; Petrou, E; Charismiadou, M A; Simitzis, P E; Deligeorgis, S G

    2014-02-01

    1. The purpose of this study was to evaluate the effects of dietary supplementation with hesperidin (one or 3 g/kg of feed) for 31 d on the performance, egg quality and yolk oxidative stability of brown and white laying hens (26-wk old). 2. Supplementation with hesperidin did not affect egg production, egg weight and egg quality traits. 3. No hesperidin effect on yolk and plasma cholesterol was observed. A strain effect was found with lower total and per g yolk cholesterol of brown hens in comparison to the white ones. 4. Oxidative stability of egg yolk, expressed as ng MDA/g yolk, was significantly improved in the hesperidin groups even from the first week of supplementation. At the same time, a significant improvement in the oxidative stability of egg yolk due to the incorporation of hesperidin in hens' diet was observed after 30 and 90 d of storage at 20°C and 4°C, respectively. 5. No hesperidin by strain interaction was detected for any of the traits measured. 6. In conclusion, incorporation of hesperidin to laying hens' feed did not affect productive and egg qualitative traits. On the other hand, dietary hesperidin supplementation significantly improved oxidative stability of both fresh and stored eggs. Antioxidant properties of hesperidin seem to make it a promising natural agent for improving the shelf life of eggs.

  3. Iron oxide nanoparticles stabilized with a bilayer of oleic acid for magnetic hyperthermia and MRI applications

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Paula I.P. [i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica (Portugal); Laia, César A.T. [Laboratório Associado para a Química Verde (LAQV), REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Carvalho, Alexandra [i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica (Portugal); Pereira, Laura C.J.; Coutinho, Joana T. [C2TN, Instituto Superior Técnico, Universidade de Lisboa, Estrada Nacional 10, ao km 139,7, 2695-066 Bobadela LRS (Portugal); Ferreira, Isabel M.M., E-mail: imf@fct.unl.pt [i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica (Portugal); Novo, Carlos M.M. [Instituto de Higiene e Medicina Tropical, Universidade Nova de Lisboa, IHMT/UNL, 1349-008 Lisboa (Portugal); Borges, João Paulo, E-mail: jpb@fct.unl.pt [i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica (Portugal)

    2016-10-15

    Highlights: • Superparamagnetic iron oxide nanoparticles were stabilized with oleic acid. • Maximum stabilization was achieved at neutral pH. • Magnetic resonance imaging and magnetic hyperthermia applications were tested. • The produced nanoparticles are viable for both biomedical applications. - Abstract: Iron oxide nanoparticles (Fe{sub 3}O{sub 4}, IONPs) are promising candidates for several biomedical applications such as magnetic hyperthermia and as contrast agents for magnetic resonance imaging (MRI). However, their colloidal stability in physiological conditions hinders their application requiring the use of biocompatible surfactant agents. The present investigation focuses on obtaining highly stable IONPs, stabilized by the presence of an oleic acid bilayer. Critical aspects such as oleic acid concentration and pH were optimized to ensure maximum stability. NPs composed of an iron oxide core with an average diameter of 9 nm measured using transmission electron microscopy (TEM) form agglomerates with an hydrodynamic diameter of around 170 nm when dispersed in water in the presence of an oleic acid bilayer, remaining stable (zeta potential of −120 mV). Magnetic hyperthermia and the relaxivities measurements show high efficiency at neutral pH which enables their use for both magnetic hyperthermia and MRI.

  4. Iron oxide nanoparticles stabilized with a bilayer of oleic acid for magnetic hyperthermia and MRI applications

    International Nuclear Information System (INIS)

    Soares, Paula I.P.; Laia, César A.T.; Carvalho, Alexandra; Pereira, Laura C.J.; Coutinho, Joana T.; Ferreira, Isabel M.M.; Novo, Carlos M.M.; Borges, João Paulo

    2016-01-01

    Highlights: • Superparamagnetic iron oxide nanoparticles were stabilized with oleic acid. • Maximum stabilization was achieved at neutral pH. • Magnetic resonance imaging and magnetic hyperthermia applications were tested. • The produced nanoparticles are viable for both biomedical applications. - Abstract: Iron oxide nanoparticles (Fe 3 O 4 , IONPs) are promising candidates for several biomedical applications such as magnetic hyperthermia and as contrast agents for magnetic resonance imaging (MRI). However, their colloidal stability in physiological conditions hinders their application requiring the use of biocompatible surfactant agents. The present investigation focuses on obtaining highly stable IONPs, stabilized by the presence of an oleic acid bilayer. Critical aspects such as oleic acid concentration and pH were optimized to ensure maximum stability. NPs composed of an iron oxide core with an average diameter of 9 nm measured using transmission electron microscopy (TEM) form agglomerates with an hydrodynamic diameter of around 170 nm when dispersed in water in the presence of an oleic acid bilayer, remaining stable (zeta potential of −120 mV). Magnetic hyperthermia and the relaxivities measurements show high efficiency at neutral pH which enables their use for both magnetic hyperthermia and MRI.

  5. Surface photo-oxidation and photo-stabilization of photocross-linked polyethylene

    International Nuclear Information System (INIS)

    Wu Qiang Hua; Qu Bao Jun; Shi Wenfang

    1999-01-01

    The surface photo-oxidation and photo-stabilization of photocross-linked polyethylene (XLPE) have been studied by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and thermal-aging measurements. The XPS and FTIR data gave the evidence that the surface photo-oxidation of XLPE increases apparently with increasing UV-irradiation time. The main photo-oxidation products have been identified as hydroperoxides and various carbonyl compounds. The photo-stabilization of XLPE can be carried out by suitable pre-irradiation of low-pressure mercury (LPM) lamp and by addition of hinder amine light stabilizers (HALS). The present study shows that the optimum time of pre-irradiation with LPM lamp is 10 seconds, which can detach the oxygen absorbed on the PE surface before the photocross-linking. The addition of HALS into PE resins can stabilize XLPE very efficiently in the photocross-linking process of PE. Tinuvin 783 is the best photo-stabilizer among the three kinds of FIALS

  6. Conservation of Oxidative Protein Stabilization in an Insect Homologue of Parkinsonism-Associated Protein DJ-1

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jiusheng; Prahlad, Janani; Wilson, Mark A. (UNL)

    2012-08-21

    DJ-1 is a conserved, disease-associated protein that protects against oxidative stress and mitochondrial damage in multiple organisms. Human DJ-1 contains a functionally essential cysteine residue (Cys106) whose oxidation is important for regulating protein function by an unknown mechanism. This residue is well-conserved in other DJ-1 homologues, including two (DJ-1{alpha} and DJ-1{beta}) in Drosophila melanogaster. Because D. melanogaster is a powerful model system for studying DJ-1 function, we have determined the crystal structure and impact of cysteine oxidation on Drosophila DJ-1{beta}. The structure of D. melanogaster DJ-1{beta} is similar to that of human DJ-1, although two important residues in the human protein, Met26 and His126, are not conserved in DJ-1{beta}. His126 in human DJ-1 is substituted with a tyrosine in DJ-1{beta}, and this residue is not able to compose a putative catalytic dyad with Cys106 that was proposed to be important in the human protein. The reactive cysteine in DJ-1 is oxidized readily to the cysteine-sulfinic acid in both flies and humans, and this may regulate the cytoprotective function of the protein. We show that the oxidation of this conserved cysteine residue to its sulfinate form (Cys-SO{sub 2{sup -}}) results in considerable thermal stabilization of both Drosophila DJ-1{beta} and human DJ-1. Therefore, protein stabilization is one potential mechanism by which cysteine oxidation may regulate DJ-1 function in vivo. More generally, most close DJ-1 homologues are likely stabilized by cysteine-sulfinic acid formation but destabilized by further oxidation, suggesting that they are biphasically regulated by oxidative modification.

  7. Characteristics of Oxidative Storage Stability of Canola Fatty Acid Methyl Ester Stabilised with Antioxidants

    Directory of Open Access Journals (Sweden)

    Tirto Prakoso

    2012-11-01

    Full Text Available The storage effects on the oxidation characteristics of fatty acid methyl ester of canola oil (CME were investigated in this study. CME stabilised with two antioxidants, i.e. 2,6-di-tert-bytyl-p-cresol (BHT and 6,6-di-tert-butyl-2, 2’-methylendi-p-cresol (BPH, was stored at 20, 40 and 60°C. The oxidation stability data were measured by the Rancimat test method and it was found that both BHT and BPH addition increased the oxidation resistance of the CME. The results showed that when BPH or BHT was added at a concentration of 100 ppm, the oxidation induction period of the neat CME samples increased from 5.53 h to 6.93 h and 6.14 h, respectively. Comparing both antioxidants, BPH proved to be more effective in increasing the oxidation resistance when both antioxidants were added at the same concentration. Furthermore, the oxidation induction time decreased linearly with the storage time. It was shown that the oxidation occurred rapidly in the first 8 weeks of storage. Later, a kinetic study was undertaken and first-order kinetics were applied to explain the oxidation characteristics of the CME added with antioxidants. This kinetic study focused on exploiting the activation energy values obtained from the Arrhenius equations. Also, the oxidation effects on other quality parameters, including acid value, peroxide value, kinematic viscosity, and water content, were examined.

  8. Preparation of Graphene Oxide Stabilized Nickel Nanoparticles with Thermal Effusivity Properties by Laser Ablation Method

    Directory of Open Access Journals (Sweden)

    Amir Reza Sadrolhosseini

    2013-01-01

    Full Text Available Nickel nanoparticles were dispersed uniformly in a graphene oxide solution, using a laser ablation technique with different ablation times that ranged from 5 to 20 minutes. The results indicate that the nickel nanoparticle sizes inside the graphene oxide decreased, and the volume fraction for the nickel nanoparticles in the graphene oxide increased with an increasing ablation time. Further, using Fourier Transform Infrared Spectroscopy, the nickel nanoparticles in the graphene oxide demonstrate greater stability from possible agglomeration when the nanoparticle was capped with oxygen from the carboxyl group of the graphene oxide. The thermal effusivity of the graphene oxide and nickel nanoparticle graphene oxide composite was measured using a photoacoustic technique. The concentration of graphene oxide shifted from 0.05 mg/L to 2 mg/L, and the thermal effusivity increased from 0.153 W·s1/2·cm−2·K−1 to 0.326 W·s1/2·cm−2·K−1. In addition, the thermal effusivity of the nickel nanoparticles graphene oxide composite increased with an increase in the volume fraction of nickel nanoparticles from 0.1612 W·s1/2·cm−2·K−1 to 0.228 W·s1/2·cm−2·K−1.

  9. Scalable high-affinity stabilization of magnetic iron oxide nanostructures by a biocompatible antifouling homopolymer

    KAUST Repository

    Luongo, Giovanni

    2017-10-12

    Iron oxide nanostructures have been widely developed for biomedical applications, due to their magnetic properties and biocompatibility. In clinical application, the stabilization of these nanostructures against aggregation and non-specific interactions is typically achieved using weakly anchored polysaccharides, with better-defined and more strongly anchored synthetic polymers not commercially adopted due to complexity of synthesis and use. Here, we show for the first time stabilization and biocompatibilization of iron oxide nanoparticles by a synthetic homopolymer with strong surface anchoring and a history of clinical use in other applications, poly(2-methacryloyloxyethy phosphorylcholine) (poly(MPC)). For the commercially important case of spherical particles, binding of poly(MPC) to iron oxide surfaces and highly effective individualization of magnetite nanoparticles (20 nm) are demonstrated. Next-generation high-aspect ratio nanowires (both magnetite/maghemite and core-shell iron/iron oxide) are furthermore stabilized by poly(MPC)-coating, with nanowire cytotoxicity at large concentrations significantly reduced. The synthesis approach is exploited to incorporate functionality into the poly(MPC) chain is demonstrated by random copolymerization with an alkyne-containing monomer for click-chemistry. Taking these results together, poly(MPC) homopolymers and random copolymers offer a significant improvement over current iron oxide nanoformulations, combining straightforward synthesis, strong surface-anchoring and well-defined molecular weight.

  10. Stability of O/W Emulsion with Synthetic Perfumes Oxidized by Singlet Oxygen

    Directory of Open Access Journals (Sweden)

    Naoki Watabe

    2013-01-01

    Full Text Available We prepared O/W emulsion composed of a synthetic perfume, n-dodecane, protoporphyrin IX disodium salt (PpIX-2Na, sodium dodecyl sulfate, and water and investigated oxidative decomposition of the synthetic perfume in the emulsion and change in the stability of the emulsion by singlet oxygen (1O2 generated by photosensitization of PpIX-2Na. We used eugenol, linalool, benzyl acetate, α-ionone, α-hexylcinnamaldehyde, and d-limonene as a synthetic perfume. The stability of the O/W emulation including eugenol and linalool significantly decreased with increasing light irradiation time. The decrease in the emulsion stability may be attributable to oxidative decomposition of eugenol and linalool by 1O2 and enlargement of the oil droplet size.

  11. Characterization of Environmental Stability of Pulsed Laser Deposited Oxide Ceramic Coatings

    Energy Technology Data Exchange (ETDEWEB)

    ADAMS, THADM

    2004-03-02

    A systematic investigation of candidate hydrogen permeation materials applied to a substrate using Pulsed Laser Deposition has been performed. The investigation focused on application of leading permeation-resistant materials types (oxide, carbides, and metals) on a stainless steel substrate. and evaluation of the stability of the applied coatings. Type 304L stainless steel substrates were coated with aluminum oxide, chromium oxide, and aluminum. Characterization of the coating-substrate system adhesion was performed using scratch adhesion testing and microindentation. Coating stability and environmental susceptibility were evaluated for two conditions-air at 350 degrees Celsius and Ar-H2 at 350 degrees Celsius for up to 100 hours. Results from this study have shown the pulsed laser deposition process to be an extremely versatile technology that is capable of producing a sound coating/substrate system for a wide variety of coating materials.

  12. Ni/YSZ microstructure optimization for long-term stability of solid oxide electrolysis cells

    DEFF Research Database (Denmark)

    Hauch, Anne; Brodersen, Karen; Karas, Filip

    2014-01-01

    In the last decade there has been a renewed and increased interest in electrolysis using solid oxide cells (SOC). So far the vast majority of results reported on long-term durability of solid oxide electrolysis cells (SOEC) have been obtained using SOC produced and optimized for fuel cell operation......; i.e. solid oxide fuel cells (SOFC). However, previous long-term tests have shown that the stability behavior of the Ni/yttria-stabilized-zirconia (Ni/YSZ) fuel electrode may fall out quite differently depending on whether the cell is operated in fuel cell or electrolysis mode at otherwise similar...... test conditions. Initial work has shown significant microstructural changes of the Ni/YSZ electrode close to the electrolyte interface after long-term steam electrolysis test at -1 A/cm2 at 800 C. The results indicate that it will be advantageous to optimize the electrode structure with the aim...

  13. Oxidative Stability of Dispersions Prepared from Purified Marine Phospholipid and the Role of α-Tocopherol

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Nielsen, Nina Skall; Baron, Caroline P.

    2012-01-01

    , respectively, during 32 days of storage at 2 °C. Nonenzymatic browning was investigated through measurement of Strecker aldehydes, color changes, and pyrrole content. Dispersions containing α-tocopherol or higher levels of purified marine PL showed a lower increment of volatiles after 32 days storage......The objective of this study was to investigate the oxidative stability of dispersions prepared from different levels of purified marine phospholipid (PL) obtained by acetone precipitation, with particular focus on the interaction between α-tocopherol and PL in dispersions. This also included...... the investigation of nonenzymatic browning in purified marine PL dispersions. Dispersions were prepared by high-pressure homogenizer. The oxidative and hydrolytic stabilities of dispersions were investigated by determination of hydroperoxides, secondary volatile oxidation products, and free fatty acids...

  14. Recent advances in bioinorganic chemistry of bismuth.

    Science.gov (United States)

    Li, Hongyan; Sun, Hongzhe

    2012-04-01

    Bismuth has been used in medicine for over two centuries for the treatment of various diseases, in particular for gastrointestinal disorders, owing to its antimicrobial activity. Recent structural characterization of bismuth drugs provides an insight into assembly and pharmacokinetic pathway of the drugs. Mining potential protein targets inside the pathogen via metallomic/metalloproteomic approach and further characterization on the interactions of bismuth drugs with these targets laid foundation in understanding the mechanism of action of bismuth drugs. Such studies would be beneficial in rational design of new potential drugs. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. BISMUTH PHOSPHATE CARRIER PROCESS FOR Pu RECOVERY

    Science.gov (United States)

    Finzel, T.G.

    1959-02-01

    An improvement in the bismuth phosphate carrier precipitation process for recovering plutonium is described. It has been found that a more granular and more easily filterable carrier precipitiite is formed if the addition of the bismuth and phosphate ions is effected by first adding 9/10 of the bismuth ions necessary, then slowly adding all of the source of the phosphate ions to be incorporated in the precipitate, while digesting at 75 C and afterwards incorporating the remainder of the total bismuth ions necessary

  16. Characterization and microstructure control of sheathed superconducting bismuth strontium calcium copper oxide thick films by AC-electric-field assisted electrophoretic deposition

    Science.gov (United States)

    Yue, Cheng-Feng Joel

    The goal of this research is to fabricate and characterize the Ag-sheathed BiSrCaCuO (BSCCO) tapes using a combination of alternating current electric field assisted electrophoretic deposition (ACEPD) and thermomechanical consolidation (TMC) technique. In this method, an alternating current (AC) electric field was applied in conjunction to the direct current (DC) electric field. This AC field parallel to substrate surface was found to assist c-axis texturing of BSCCO film. Higher uni-axial pressure and temperature for thermomechanical consolidation enhance and reduce the size and number density of micro-pores. The effect of processing variables on the microstructure of BSCCO tapes was investigated in detail. The high AC field operating at high frequencies and low DC field were found to improve the c-axis texture. To improve the c-axis texture, several novel concepts were investigated in this research, namely, (i) AC-assisted EPD and (ii) thermomechanical consolidation. Such improved green film microstructure led to better superconductivity stability. The introduction of Ag-particle interlayer into the middle of BSCCO film forms the strong two-dimensional Ag-BSCCO composite, leading to the improved fracture strength and adhesion. T-peel fracture test, scanning electron microscopy, x-ray diffractometry, and SQUID magnetometry characterization results were correlated to c-axis texturing enhancement and BSCCO tape/wire processing parameters. The effects of superconductivity changes by pre-sintering microstructure control with thermomechanical consolidation parameters were discussed. The AC field assisted electrophoretic deposition mechanism for c-axis texture enhancement was modeled by simulating the trajectory of anisotropic particle in suspension. Differential equations to demonstrate the angular motion behavior of the particle was developed. Good agreement was observed before the experimental results and numerical calculations.

  17. Photoreductive generation of amorphous bismuth nanoparticles using polysaccharides--bismuth-cellulose nanocomposites.

    Science.gov (United States)

    Breitwieser, Doris; Kriechbaum, Margit; Ehmann, Heike M A; Monkowius, Uwe; Coseri, Sergiu; Sacarescu, Liviu; Spirk, Stefan

    2015-02-13

    A simple and highly reproducible synthesis of amorphous bismuth nanoparticles incorporated into a polysaccharide matrix using a photoreduction process is presented. As precursor for the generation of the Bi nanoparticles, organosoluble triphenylbismuth is used. The precursor is dissolved in toluene and mixed with a hydrophobic organosoluble polysaccharide, namely trimethylsilyl cellulose (TMSC) with high DSSi. The solution is subjected to UV exposure, which induces the homolytic cleavage of the bismuth-carbon bond in BiPh3 resulting in the formation of Bi(0) and phenyl radicals. The aggregation of the Bi atoms can be controlled in the TMSC matrix and yields nanoparticles of around 20 nm size as proven by TEM. The phenyl radicals undergo recombination to form small organic molecules like benzene and biphenyl, which can be removed from the nanocomposite after lyophilization and exposure to high vacuum. Finally, the TMSC matrix is converted to cellulose after exposure to HCl vapors, which remove the trimethylsilyl groups from the TMSC derivative. Although TMSC is converted to cellulose, the formed TMS-OH is not leaving the nanocomposite but reacts instead with surface oxide layer of the Bi nanoparticles to form silylated Bi nanoparticles as proven by TEM/EDX. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Bismuth absorption from sup 205 Bi-labelled pharmaceutical bismuth compounds used in the treatment of peptic ulcer disease

    Energy Technology Data Exchange (ETDEWEB)

    Dresow, B.; Fischer, R.; Gabbe, E.E.; Wendel, J.; Heinrich, H.C. (Eppendorf University Hospital, Hamburg (Germany))

    1992-04-01

    The absorption of bismuth from five {sup 205}Bi-labelled pharmaceutically used bismuth compounds was studied in man. From single oral doses of all compounds under investigation only <0.1% bismuth was absorbed and excreted with the urine. A significantly higher absorption was observed from the colloidal bismuth subcitrate and the basic bismuth gallate than from the basic bismuth salicylate, nitrate and aluminate. No retention of bismuth in the whole body was found from the single dose experiment. The biologic fast-term half-lives of absorbed bismuth were calculated to be 0.12 and 1.5 days. 14 refs., 2 figs., 1 tab.

  19. Natural and synthetic antioxidants: Influence on the oxidative stability of biodiesel synthesized from non-edible oil

    Energy Technology Data Exchange (ETDEWEB)

    Sarin, Amit [Department of Applied Sciences, Amritsar College of Engineering and Technology, Manawala, Amritsar-143001, Punjab (India); Singh, N.P. [Punjab Technical University, Jalandhar (India); Sarin, Rakesh; Malhotra, R.K. [Indian Oil Corporation Ltd., R and D Centre, Sector-13, Faridabad-121007 (India)

    2010-12-15

    According to the proposed National Mission on Biodiesel in India, we have undertaken studies on the oxidative stability of biodiesel synthesized from tree borne non-edible oil seeds jatropha. Neat jatropha biodiesel exhibited oxidation stability of 3.95 h and research was conducted to investigate the influence of natural and synthetic antioxidants on the oxidation stability of jatropha methyl ester. Antioxidants namely {alpha}-tocopherol, tert-butylated hydroxytoluene, tert-butylated phenol derivative, octylated butylated diphenyl amine, and tert-butylhydroxquinone were doped to improve the oxidation stability. It was found that both types of antioxidants showed beneficial effects in increasing the oxidation stability of jatropha methyl ester, but comparatively, the synthetic antioxidants were found to be more effective. (author)

  20. Aggregation and hydrolysis reactions of bismuth alkoxides

    International Nuclear Information System (INIS)

    Whitmire, K.H.; Jones, C.M.; Burkart, M.D.; Hutchinson, J.C.; McKnight, A.L.

    1992-01-01

    This paper reports that new bismuth alkoxide and oxo-alkoxide complexes have been prepared from the salt metathesis reaction of NaOR with BiCl 3 . When R = CH(CF 3 ) 2 , the product is [Bi(μ-OR)(OR) 2 (THF)] 2 . similar work with R = C 6 F 5 has not yielded a simple alkoxide, but complexes of formulation NaBi 3 (μ 3 -O)(OR) 8 (THF), NaBi 4 (μ 3 -O) 2 (OR) 9 (THF) 2 , Na 2 Bi 4 (μ 3 -O) 2 (OR) 10 and Bi 6 (μ 3 -OR)(μ 3 -O) 4 [μ 3 -OBI(OR) 4 ] 3 have been observed. The reaction of BiPh 3 with HOC 6 F 5 , however, did produce the desired alkoxide which has been characterized as [Bi(OR) 2 (μ-OR)(toluene)] 2 and [Bi(OR) 2 (μ-OR)(toluene)] 2 · 2 toluene. The reaction of this alkoxide with NaOC 6 F 5 led to the production of Bi 6 (μ 3 -O) 2 (μ 4 -O)(OR) 12 and NaBi 3 (μ 3 -O)(OR) 8 (THF) 3 . Reaction of BiPh 3 with HOC 6 F 5 in THF led to the formation of Bi 6 (μ 3 -OR)(μ 3 -O) 4 [μ 3 -OBi(OR) 4 ] 3 (THF) 2 . Surprisingly the reaction of BiEt 3 and HOR (R = C 6 F 5 or Ph) displaced only one Et group to give [Et 2 Bi(μ-OR)] oo which exist as infinite chain polymers with alternating Bi-O-Bi backbones. These spiral chains form chiral helices in the crystal lattice. The discovery of high T C superconducting copper oxide phases containing bismuth, lead and thallium has led to this investigation

  1. Stability of oxidized iron species and the redox budget of slab-derived fluids

    Science.gov (United States)

    Sanchez-Valle, C.; Hin, R.; Testemale, D.; Borca, C.; Grolimund, D.

    2017-12-01

    The high oxidation state of subduction zone magmas compared to magmas from other locations might result from the influx of oxidized fluid from the subducted oceanic plate into the mantle wedge. However, the nature of the chemical agent(s) and the mechanism responsible for the transfer of the oxidized signature from the slab to the mantle wedge remains poorly understood. In this contribution, we will discuss the oxidizing capacity of slab-derived fluids in the light of experimental results of the solubility and speciation of iron in high-pressure fluids that mimic the slab flux. Iron-bearing mineral assemblages were equilibrated with chlorinated aqueous fluids and hydrous granitic melts at different oxygen fugacities relevant for the present day crust/mantle. The concentration of iron and the distribution of stability of oxidized iron species were monitored up to 2.5 GPa and 800 °C using a combination of diamond trap experiments and XANES measurements in diamond anvil cells. The results illustrate the role of coordination chemistry involving halogen and polymerized species in the stability of oxidized iron in the fluids. The concentration of Fe3+ in the fluids progressively decreases as temperature increases, regardless of fluid composition and pressure. This implies that the fluid capacity to transport Fe3+ at high temperature may be limited, even at the redox conditions relevant for the present day crust and mantle. With the new experimental results, we place constrains on the oxidizing capacity of Fe-bearing metasomatic fluids and discuss the transfer of the oxidizing signature and the conditions for the genesis of oxidized arc magmas.

  2. Enhancing oxidative stability of sunflower oil during convective and microwave heating using grape seed extract.

    Science.gov (United States)

    Poiana, Mariana-Atena

    2012-01-01

    This study was performed to investigate the effectiveness of grape seed extract (GSE) compared to butylated hydroxytoluene (BHT) on retarding lipid oxidation of sunflower oil subjected to convection and microwave heating up to 240 min under simulated frying conditions. The progress of lipid oxidation was assessed in terms of peroxide value (PV), p-anisidine value (p-AV), conjugated dienes and trienes (CD, CT), inhibition of oil oxidation (IO) and TOTOX value. In addition, total phenolic content (TP) was evaluated in samples before and after heating in order to assess the changes in these compounds relative to the extent of lipid oxidation. The results of this study highlight that GSE showed a significantly inhibitory effect on lipid oxidation during both treatments, although to a different extent. This ability was dose-dependent; therefore, the extent of lipid oxidation was inversely related to GSE level. Convective heating, respective microwave exposure for 240 min of samples supplemented by GSE to a level of 1000 ppm, resulted in significant decreases of investigated indices relative to the control values as follows: PV (48%; 30%), p-AV (29%; 40%), CD (45%; 30%), CT (41%; 36%), TOTOX (35%; 37%). GSE to a level of 600-800 ppm inhibited the lipid oxidation in a similar manner to BHT. These results suggested that GSE can be used as a potential natural extract for improving oxidative stability of sunflower oil during thermal applications.

  3. Enhancing Oxidative Stability of Sunflower Oil during Convective and Microwave Heating Using Grape Seed Extract

    Directory of Open Access Journals (Sweden)

    Mariana-Atena Poiana

    2012-07-01

    Full Text Available This study was performed to investigate the effectiveness of grape seed extract (GSE compared to butylated hydroxytoluene (BHT on retarding lipid oxidation of sunflower oil subjected to convection and microwave heating up to 240 min under simulated frying conditions. The progress of lipid oxidation was assessed in terms of peroxide value (PV, p-anisidine value (p-AV, conjugated dienes and trienes (CD, CT, inhibition of oil oxidation (IO and TOTOX value. In addition, total phenolic content (TP was evaluated in samples before and after heating in order to assess the changes in these compounds relative to the extent of lipid oxidation. The results of this study highlight that GSE showed a significantly inhibitory effect on lipid oxidation during both treatments, although to a different extent. This ability was dose-dependent; therefore, the extent of lipid oxidation was inversely related to GSE level. Convective heating, respective microwave exposure for 240 min of samples supplemented by GSE to a level of 1000 ppm, resulted in significant decreases of investigated indices relative to the control values as follows: PV (48%; 30%, p-AV (29%; 40%, CD (45%; 30%, CT (41%; 36%, TOTOX (35%; 37%. GSE to a level of 600–800 ppm inhibited the lipid oxidation in a similar manner to BHT. These results suggested that GSE can be used as a potential natural extract for improving oxidative stability of sunflower oil during thermal applications.

  4. Ranitidine bismuth citrate: A review

    Directory of Open Access Journals (Sweden)

    N Chiba

    2001-01-01

    Full Text Available Recognition of the relationship between Helicobacter pylori infection and the development of gastroduodenal disease has increased greatly in recent years. To avoid complications of H pylori infection, such as the development of recurrent duodenal and gastric ulcers, effective therapies are required for eradication of the infection. This article reviews ranitidine bismuth citrate (RBC, a novel complex of ranitidine, bismuth and citrate, which was developed specifically for the purpose of eradicating H pylori. Dual therapy with RBC in combination with clarithromycin for 14 days yields eradication rates of 76%. Triple therapy bid for one week with a proton pump inhibitor, clarithromycin and either amoxicillin or a nitroimidazole (tinidazole or metronidazole is advocated as the treatment of choice for H pylori eradication. Analogous regimens with RBC in place of proton pump inhibitors show effective eradication rates in comparative studies and with pooled data. RBC, used alone or in combination with other antibiotics, appears to be a safe and effective drug for the treatment of H pylori infection. Bismuth levels do not appear to rise to toxic levels.

  5. Oxidative stabilization of polyacrylonitrile nanofibers and carbon nanofibers containing graphene oxide (GO: a spectroscopic and electrochemical study

    Directory of Open Access Journals (Sweden)

    İlknur Gergin

    2017-08-01

    Full Text Available In this study, a precursor for carbon nanofibers (CNF was fabricated via electrospinning and carbonized through a thermal process. Before carbonization, oxidative stabilization should be applied, and the oxidation mechanism also plays an important role during carbonization. Thus, the understanding of the oxidation mechanism is an essential part of the production of CNF. The oxidation process of polyacrylonitrile was studied and nanofiber webs containing graphene oxide (GO are obtained to improve the electrochemical properties of CNF. Structural and morphological characterizations of the webs are carried out by using attenuated total reflectance Fourier transform infrared spectroscopy and Raman spectroscopy, scanning electron microscopy, atomic force microscopy and transmission electron microscopy. Mechanical tests are performed with a dynamic mechanical analyzer, and thermal studies are conducted by using thermogravimetric analysis. Electrochemical impedance spectroscopy, and cyclic voltammetry are used to investigate capacitive behavior of the products. The proposed equivalent circuit model was consistent with charge-transfer processes taking place at interior pores filled with electrolyte.

  6. Calculation of the Stabilization Energies of Oxidatively Damaged Guanine Base Pairs with Guanine

    Directory of Open Access Journals (Sweden)

    Hiroshi Miyazawa

    2012-06-01

    Full Text Available DNA is constantly exposed to endogenous and exogenous oxidative stresses. Damaged DNA can cause mutations, which may increase the risk of developing cancer and other diseases. G:C-C:G transversions are caused by various oxidative stresses. 2,2,4-Triamino-5(2H-oxazolone (Oz, guanidinohydantoin (Gh/iminoallantoin (Ia and spiro-imino-dihydantoin (Sp are known products of oxidative guanine damage. These damaged bases can base pair with guanine and cause G:C-C:G transversions. In this study, the stabilization energies of these bases paired with guanine were calculated in vacuo and in water. The calculated stabilization energies of the Ia:G base pairs were similar to that of the native C:G base pair, and both bases pairs have three hydrogen bonds. By contrast, the calculated stabilization energies of Gh:G, which form two hydrogen bonds, were lower than the Ia:G base pairs, suggesting that the stabilization energy depends on the number of hydrogen bonds. In addition, the Sp:G base pairs were less stable than the Ia:G base pairs. Furthermore, calculations showed that the Oz:G base pairs were less stable than the Ia:G, Gh:G and Sp:G base pairs, even though experimental results showed that incorporation of guanine opposite Oz is more efficient than that opposite Gh/Ia and Sp.

  7. Biodiesel from “Morelos” Rice: Synthesis, Oxidative Stability, and Corrosivity

    Directory of Open Access Journals (Sweden)

    J. Zuñiga-Díaz

    2018-01-01

    Full Text Available Rice bran is a by-product of great production worldwide and its use for the synthesis of biodiesel does not affect the food chain and therefore it is an excellent alternative for the production of biofuels with low carbon footprint. In this work, the synthesis of biodiesel was carried out from the raw rice bran oil of a kernel variety called “Morelos rice.” The stability and corrosivity characteristics of biodiesel were determined. Biodiesel stability was determined both under storage conditions and under accelerated oxidation conditions, and its corrosivity was evaluated by electrochemical impedance spectroscopy at 110°C under aerated conditions. The results showed that, due to the high instability of the rice bran, its raw oil had a high content of free fatty acids. The synthesized biodiesel showed excellent stability under storage conditions of up to five months, and its oxidative stability was much higher than that established in international standards. On the other hand, biodiesel showed low corrosivity and this was only significant once oxidative degradation began.

  8. Effects of dietary supplementation with vitamin E and organic selenium on the oxidative stability of beef.

    Science.gov (United States)

    O'Grady, M N; Monahan, F J; Fallon, R J; Allen, P

    2001-11-01

    The effects of supplementation of beef cattle diets with organic Se (0.3 mg/kg) and vitamin E (300 I.U. alpha-tocopheryl acetate/kg feed), for 55 d preceding slaughter, on the antioxidant status and oxidative stability of muscle was examined. Dietary vitamin E supplementation led to an increase (P plasma, and longissimus muscle alpha-tocopherol levels. In minced longissimus muscle stored in 80% 02:20% CO2, lipid and oxymyoglobin oxidation were lower (P vitamin E-supplemented animals compared with unsupplemented animals. Dietary Se supplementation did not significantly affect muscle Se levels, glutathione peroxidase activity, or susceptibility to lipid and oxymyoglobin oxidation in the presence or absence of vitamin E. Covariance analysis indicated that, in addition to muscle alpha-tocopherol, differences in muscle glutathione peroxidase activity, and pH could account for variation in the susceptibility of muscle to lipid and oxymyoglobin oxidation.

  9. Thermo-Oxidative Stability Evaluation of Bullfrog (Rana catesbeiana Shaw) Oil.

    Science.gov (United States)

    Rutckeviski, Renata; Xavier-Júnior, Francisco H; Morais, Andreza R V; Alencar, Éverton N; Amaral-Machado, Lucas; Genre, Julieta; Gondim, Amanda D; Egito, Eryvaldo S T

    2017-04-10

    Bullfrog oil (BO), a natural product obtained from recycling of adipose tissue from the amphibian Rana catesbeiana Shaw, has been recently evaluated as a therapeutic activity ingredient. This work aimed to evaluate the long-term and accelerated thermal oxidative stabilities of this product, which is a promising raw material for emulsion technology development. BO was extracted from amphibian adipose tissue at 70 °C with a yield of 60% ± 0.9%. Its main fatty acid compounds were oleic (30.0%) and eicosapentaenoic (17.6%) acids. Using titration techniques, BO showed peroxide, acid, iodine and saponification indices of 1.92 mEq·O₂/kg, 2.95 mg·KOH/g oil, 104.2 g I₂/100 g oil and 171.2 mg·KOH/g oil, respectively. In order to improve the accelerated oxidative stability of BO, synthetic antioxidants butylhydroxytoluene (BHT) and buthylhydroxyanisole (BHA) were used. The addition of BHT increased the oxidation induction time compared to the pure oil, or the oil containing BHA. From the results, the best oil-antioxidant mixture and concentration to increase the oxidative stability and allow the oil to be a stable raw material for formulation purposes was derived.

  10. Thermo-Oxidative Stability Evaluation of Bullfrog (Rana catesbeiana Shaw Oil

    Directory of Open Access Journals (Sweden)

    Renata Rutckeviski

    2017-04-01

    Full Text Available Bullfrog oil (BO, a natural product obtained from recycling of adipose tissue from the amphibian Rana catesbeiana Shaw, has been recently evaluated as a therapeutic activity ingredient. This work aimed to evaluate the long-term and accelerated thermal oxidative stabilities of this product, which is a promising raw material for emulsion technology development. BO was extracted from amphibian adipose tissue at 70 °C with a yield of 60% ± 0.9%. Its main fatty acid compounds were oleic (30.0% and eicosapentaenoic (17.6% acids. Using titration techniques, BO showed peroxide, acid, iodine and saponification indices of 1.92 mEq·O2/kg, 2.95 mg·KOH/g oil, 104.2 g I2/100 g oil and 171.2 mg·KOH/g oil, respectively. In order to improve the accelerated oxidative stability of BO, synthetic antioxidants butylhydroxytoluene (BHT and buthylhydroxyanisole (BHA were used. The addition of BHT increased the oxidation induction time compared to the pure oil, or the oil containing BHA. From the results, the best oil-antioxidant mixture and concentration to increase the oxidative stability and allow the oil to be a stable raw material for formulation purposes was derived.

  11. The Antioxidant Activity and Oxidative Stability of Cold-Pressed Oils.

    Science.gov (United States)

    Prescha, Anna; Grajzer, Magdalena; Dedyk, Martyna; Grajeta, Halina

    2014-01-01

    In our study, we characterized the antioxidant activity and oxidative stability of cold-pressed macadamia, avocado, sesame, safflower, pumpkin, rose hip, Linola, flaxseed, walnut, hempseed, poppy, and milk thistle oils. The radical scavenging activity of the non-fractionated fresh oil, as well as the lipophilic and hydrophilic fractions of the oil was determined using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. The fatty acid composition of the fresh and stored oils was analyzed by gas chromatography. The acid value, peroxide value, p -anisidine value and conjugated diene and triene contents in the fresh oils, as well as in those stored throughout the whole period of their shelf life, were measured by CEN ISO methods. The antioxidant activity of the oils expressed as Trolox equivalent antioxidant capacity (TEAC), ranged from 0.17 to 2.32 mM. The lipophilic fractions of the oils were characterized by much higher antioxidant activity than the hydrophilic ones. There were no significant changes in fatty acid composition and only slight changes in the oxidative stability parameters of the oils during their shelf life. Through the assessment of the relationship between antiradical activity and the oxidative stability of oils, it is proposed that a DPPH assay predicts the formation of oxidation products in cold-pressed oils-however, the correlations differ in fractionated and nonfractionated oils.

  12. EFFECT OF PHYTOGENIC ADDITIVES ON OXIDATION STABILITY OF FROZEN CHICKEN MEAT

    Directory of Open Access Journals (Sweden)

    Marek Bobko

    2016-10-01

    Full Text Available In this study, oxidative stability of frozen chicken breast and thigh muscle after application of feed mixtures enriched by phytogenic additives was investigated. The 150 pieces one-day-old chicks of Cobb 500 hybrid combination were divided into three groups: C - control group, G1 – experimental group with addition 1000 mg kg-1 Biostrong 510 + FortiBac and G2 – experimental group with addition 1000 mg kg-1 Agolin Acid.  The broiler chickens were fed during 42 days by ad libitum. Samples of chicken breast and thigh muscle were analysed in the 1st day and after 1st, 2nd, 3rd, 4th, 5th and 6th month of frozen storage at -18 °C. During testing period we recorded positive influence of phytogenic additives on oxidative stability of chicken meat in experimental groups (G1, G2. After 6th month of frozen storage, we found higher malondialdehyde (MDA values and lower oxidative stability of breast muscle in control group (0.167 mg.kg-1 compared to experimental groups G1 (0.149 mg.kg-1 and G2 (0.145 mg.kg-1. Similar tendency of oxidative changes as in the breast muscle was recorded in the thigh muscle. At the end of frozen storage MDA average values of thigh muscle were higher in control group (0.181 mg.kg-1 compared to experimental groups (G1 - 0.163 mg.kg-1 and G2 - 0.160 mg.kg-1.  Based on the obtained results we can stated, that phytogenic additives applied in chicken nutrition had positive influence of, namely on oxidation stability of fatty substances.

  13. Methods study of homogeneity and stability test from cerium oxide CRM candidate

    International Nuclear Information System (INIS)

    Samin; Susanna TS

    2016-01-01

    The methods study of homogeneity and stability test from cerium oxide CRM candidate has been studied based on ISO 13258 and KAN DP. 01. 34. The purpose of this study was to select the test method homogeneity and stability tough on making CRM cerium oxide. Prepared 10 sub samples of cerium oxide randomly selected types of analytes which represent two compounds, namely CeO 2 and La 2 O 3 . At 10 sub sample is analyzed CeO 2 and La 2 O 3 contents in duplicate with the same analytical methods, by the same analyst, and in the same laboratory. Data analysis results calculated statistically based on ISO 13528 and KAN DP.01.34. According to ISO 13528 Cerium Oxide samples said to be homogeneous if Ss ≤ 0.3 σ and is stable if | Xr – Yr | ≤ 0.3 σ. In this study, the data of homogeneity test obtained CeO 2 is Ss = 2.073 x 10-4 smaller than 0.3 σ (0.5476) and the stability test obtained | Xr - Yr | = 0.225 and the price is < 0.3 σ. Whereas for La 2 O 3 , the price for homogeneity test obtained Ss = 1.649 x 10-4 smaller than 0.3 σ (0.4865) and test the stability of the price obtained | Xr - Yr | = 0.2185 where the price is < 0.3 σ. Compared with the method from KAN, a sample of cerium oxide has also been homogenized for Fcalc < Ftable and stable, because | Xi - Xhm | < 0.3 x n IQR. Provided that the results of the evaluation homogeneity and stability test from CeO 2 CRM candidate test data were processed using statistical methods ISO 13528 is not significantly different with statistical methods from KAN DP.01.34, which together meet the requirements of a homogeneous and stable. So the test method homogeneity and stability test based on ISO 13528 can be used to make CRM cerium oxide. (author)

  14. Graphene oxide stabilized by PLA-PEG copolymers for the controlled delivery of paclitaxel.

    Science.gov (United States)

    Angelopoulou, A; Voulgari, E; Diamanti, E K; Gournis, D; Avgoustakis, K

    2015-06-01

    To investigate the application of water-dispersible poly(lactide)-poly(ethylene glycol) (PLA-PEG) copolymers for the stabilization of graphene oxide (GO) aqueous dispersions and the feasibility of using the PLA-PEG stabilized GO as a delivery system for the potent anticancer agent paclitaxel. A modified Staudenmaier method was applied to synthesize graphene oxide (GO). Diblock PLA-PEG copolymers were synthesized by ring-opening polymerization of dl-lactide in the presence of monomethoxy-poly(ethylene glycol) (mPEG). Probe sonication in the presence of PLA-PEG copolymers was applied in order to reduce the hydrodynamic diameter of GO to the nano-size range according to dynamic light scattering (DLS) and obtain nano-graphene oxide (NGO) composites with PLA-PEG. The composites were characterized by atomic force microscopy (AFM), thermogravimetric analysis (TGA), and DLS. The colloidal stability of the composites was evaluated by recording the size of the composite particles with time and the resistance of composites to aggregation induced by increasing concentrations of NaCl. The composites were loaded with paclitaxel and the in vitro release profile was determined. The cytotoxicity of composites against A549 human lung cancer cells in culture was evaluated by flow cytometry. The uptake of FITC-labeled NGO/PLA-PEG by A549 cells was also estimated with flow cytometry and visualized with fluorescence microscopy. The average hydrodynamic diameter of NGO/PLA-PEG according to DLS ranged between 455 and 534 nm, depending on the molecular weight and proportion of PLA-PEG in the composites. NGO/PLA-PEG exhibited high colloidal stability on storage and in the presence of high concentrations of NaCl (far exceeding physiological concentrations). Paclitaxel was effectively loaded in the composites and released by a highly sustained fashion. Drug release could be regulated by the molecular weight of the PLA-PEG copolymer and its proportion in the composite. The paclitaxel

  15. A new method to determine oxidative stability of vegetable fats and oils at simulated frying temperature

    Directory of Open Access Journals (Sweden)

    Gertz Christian

    2001-01-01

    Full Text Available A new procedure at simulated frying conditions in our laboratory was developed to monitor frying stability of fats and oils. Water-conditioned silica was prepared and added to the fresh vegetable oil, which was heated for two hours at 170°C. The oil stability at frying temperature was then evaluated by determining the amount of formed dimeric triglycerides The results obtained showed that the stability of the vegetable oils at frying temperature could not be explained by the fatty acid composition alone. Corn oil was observed to be more stable than soybean oil, and rapeseed oil was better than olive oil. It was also observed that crude, non-refined oils were found to have a better heat stability than refin-ed oils. To estimate the effectiveness of synthetic and naturally occurring antioxidants, namely various tocopherols, tocopherol acetate and phytosterol fractions, phenolic compounds like quercetin, oryzanol, ferulic acid, gallates, BHT, BHA and other compounds like ascorbic acid 6-palmitate and squalene were added to refined sunflower and rape seed oil, and their oxidative stability at elevated temperature (OSET values determined. Both linoleic and oleic rich oils gave comparable results for the activity of the various compounds. alpha-tocopherol, tocopherol esters and BHA had low effects on oil stability at frying temperature, while ascorbyl palmitate and some phytosterol fractions were found to have the most stabilizing activity under frying conditions.

  16. Effect of heating on oxidation stability and fatty acid composition of microwave roasted groundnut seed oil.

    Science.gov (United States)

    Abbas Ali, M; Anowarul Islam, M; Othman, Noor Hidayu; Noor, Ahmadilfitri Md

    2017-12-01

    The oxidative stability and fatty acid composition of groundnut seed oil (GSO) exposed to microwaves were evaluated during heating at 170 °C. During heating, the oxidative indices such as free fatty acid, peroxide value, p -anisidine value, TOTOX, thiobarbituric acid value, specific extinctions, and color value were increased. The increments were found to be higher in unroasted seed oils compared to roasted ones indicating lower release of lipid oxidation products in roasted GSO. After 9 h heating, the relative content of polyunsaturated fatty acid (PUFA) decreased to 89.53% and that of saturated fatty acid (SFA) increased to 117.46% in unroasted sample. The relative content of PUFA decreased to 92.05% and that of SFA increased to 105.76% in 7.5 min roasted sample after 9 h of heating. However, the roasting process slowed down the oxidative deterioration of PUFA. With increased heating times, an appreciable loss was more apparent in the triacylglycerol species OLL and OOL in unroasted samples compared to roasted ones. In FTIR, the peak intensities in unroasted samples were markedly changed in comparison with roasted samples during heating. The roasting of groundnut seed prior to the oil extraction reduced the oxidative degradation of oil samples; thereby increasing heat stability.

  17. Selective Solvent-Induced Stabilization of Polar Oxide Surfaces in an Electrochemical Environment

    Science.gov (United States)

    Yoo, Su-Hyun; Todorova, Mira; Neugebauer, Jörg

    2018-02-01

    The impact of an electrochemical environment on the thermodynamic stability of polar oxide surfaces is investigated for the example of ZnO(0001) surfaces immersed in water using density functional theory calculations. We show that solvation effects are highly selective: They have little effect on surfaces showing a metallic character, but largely stabilize semiconducting structures, particularly those that have a high electrostatic penalty in vacuum. The high selectivity is shown to have direct consequences for the surface phase diagram and explains, e.g., why certain surface structures could be observed only in an electrochemical environment.

  18. Stabilization of oil-in-water emulsions by enzyme catalyzed oxidative gelation of sugar beet pectin

    DEFF Research Database (Denmark)

    Abang Zaidel, Dayang Norulfairuz; Chronakis, Ioannis S.; Meyer, Anne S.

    2013-01-01

    Enzyme catalyzed oxidative cross-linking of feruloyl groups can promote gelation of sugar beet pectin (SBP). It is uncertain how the enzyme kinetics of this cross-linking reaction are affected in emulsion systems and whether the gelation affects emulsion stability. In this study, SBP (2.5% w...... catalyzed oxidative gelation of SBP was evaluated by small angle oscillatory measurements for horseradish peroxidase (HRP) (EC 1.11.1.7) and laccase (EC 1.10.3.2) catalysis, respectively. HRP catalyzed gelation rates, determined from the slopes of the increase of elastic modulus (G0) with time, were higher...

  19. Oxidative stability of mayonnaise containing structured lipids produced from sunflower oil and caprylic acid

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Xu, Xuebing; Nielsen, Nina Skall

    2003-01-01

    Mayonnaise based on enzymatically produced specific structured lipid (SL) from sunflower oil and caprylic acid was compared with mayonnaise based on traditional sunflower oil (SO) or chemically randomized lipid (RL) with respect to their oxidative stability, sensory and rheological properties......, but was most likely influenced by the structure of the lipid, the lower tocopherol content and the higher initial levels of lipid hydroperoxides and secondary volatile oxidation compounds in the SL itself compared with the RL and traditional sunflower oil employed. EDTA was a strong antioxidant, while propyl...

  20. Emulsification technique affects oxidative stability of fish oil-in-water emulsion

    DEFF Research Database (Denmark)

    Horn, Anna Frisenfeldt; Nielsen, Nina Skall; Jensen, Louise Helene Søgaard

    .g. homogenization pressure can affect how proteins locate themselves at the interface of an emulsion. The hypothesis is therefore that emulsions produced with different emulsification equipments differ in their oxidative stability due to differences in the behaviour of the proteins at the interface. The aim...... of this study was therefore to compare lipid oxidation in 10% fish oil-in-water emulsions prepared by two different kinds of high pressure homogenizers i.e. a microfluidizer and a two valve high pressure homogenizer. Emulsions were made with equal droplet sizes, and with either 1% sodium caseinate or 1% whey...

  1. Emulsification technique affects oxidative stability of fish oil-in-water emulsions

    DEFF Research Database (Denmark)

    Horn, Anna Frisenfeldt; Nielsen, Nina Skall; Jensen, Louise Helene Søgaard

    .g. homogenization pressure can affect how proteins locate themselves at the interface of an emulsion. The hypothesis is therefore that emulsions produced with different emulsification equipments differ in their oxidative stability due to differences in the behaviour of the proteins at the interface. The aim...... of this study was to compare lipid oxidation in 10% fish oil-in-water emulsions prepared by two different kinds of high pressure homogenizers i.e. a microfluidizer and a two valve high pressure homogenizer. Emulsions were made with equal droplet sizes, and with either 1% sodium caseinate or 1% whey protein...

  2. Phase stability and oxygen transport properties of mixed ionic-electronic conducting oxides

    OpenAIRE

    Yoo, C.-Y.

    2012-01-01

    The application of mixed ionic-electronic conducting oxides as oxygen separation membrane for the production of oxygen offers significant advantages over conventional cryogenic distillation. Perovskite- and fluorite-type oxides are promising candidates for such application. The research described in this thesis is mainly focused on i) crystal chemistry and phase stability of either Zr- or Nb-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-¿ (BSCF), and those of the parent perovskite phase, and ii) oxygen ...

  3. Oxidative Stability and Sensory Attributes of Fermented Milk Product Fortified with Fish Oil and Marine Phospholipids

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Thomsen, Birgitte Raagaard; Hyldig, Grethe

    2013-01-01

    Marine phospholipids (PL) are potential ingredients for food fortification due to its numerous advantages. The main objective of this study was to investigate whether a fermented milk product fortified with a mixture of marine PL and fish oil had better oxidative stability than a fermented milk...... of primary, secondary volatile oxidation products and tocopherol content upon 32 days storage at 2 °C and 28 days storage at 5 °C, respectively. Analyses of particle size distribution, viscosity and microbial growth were also performed. In addition, sensory attributes such as sour, fishy and rancid flavor...

  4. Atomic Layer Deposition of Bismuth Vanadates for Solar Energy Materials.

    Science.gov (United States)

    Stefik, Morgan

    2016-07-07

    The fabrication of porous nanocomposites is key to the advancement of energy conversion and storage devices that interface with electrolytes. Bismuth vanadate, BiVO4 , is a promising oxide for solar water splitting where the controlled fabrication of BiVO4 layers within porous, conducting scaffolds has remained a challenge. Here, the atomic layer deposition of bismuth vanadates is reported from BiPh3 , vanadium(V) oxytriisopropoxide, and water. The resulting films have tunable stoichiometry and may be crystallized to form the photoactive scheelite structure of BiVO4 . A selective etching process was used with vanadium-rich depositions to enable the synthesis of phase-pure BiVO4 after spinodal decomposition. BiVO4 thin films were measured for photoelectrochemical performance under AM 1.5 illumination. The average photocurrents were 1.17 mA cm(-2) at 1.23 V versus the reversible hydrogen electrode using a hole-scavenging sulfite electrolyte. The capability to deposit conformal bismuth vanadates will enable a new generation of nanocomposite architectures for solar water splitting. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Human milk fat substitute from butterfat: production by enzymatic interesterification and evaluation of oxidative stability

    DEFF Research Database (Denmark)

    Sørensen, Ann-Dorit Moltke; Xu, Xuebing; Zhang, Long

    2010-01-01

    Recent data have suggested that the fatty acid composition and molecular structure of fats in infant formulas should be as similar to human milk fat as possible to obtain optimal fat and calcium absorption from the infant formula. This work investigated the possibilities of using enzyme technology...... and butterfat as a material to produce a fat similar to human milk fat with respect to the above parameters. Moreover, the oxidative stability of the enzyme modified human milk fat substitute (HMFS) was compared to the fat blend used for the production of HMFS. Using a combination of enzyme technology......, fractionation and batch deodorization and with butterfat in combination with soybean oil and rapeseed oil as raw materials it was possible to produce HMFS with a molecular structure and fatty acid composition that was very similar to that of human milk fat. The oxidative stability of the HMFS oil was lower than...

  6. Roasting pumpkin seeds and changes in the composition and oxidative stability of cold-pressed oils.

    Science.gov (United States)

    Raczyk, Marianna; Siger, Aleksander; Radziejewska-Kubzdela, Elżbieta; Ratusz, Katarzyna; Rudzińska, Magdalena

    2017-01-01

    Pumpkin seed oil is valuable oil for its distinctive taste and aroma, as well as supposed health- promoting properties. The aim of this study was to investigate how roasting pumpkin seeds influences the physicochemical properties of cold-pressed oils. The fatty acid composition, content of phytosterols, carotenoids and tocopherols, oxidative stability and colour were determined in oils after cold pressing and storage for 3 months using GC-FID, GCxGC-ToFMS, HPLC, Rancimat and spectrophotometric methods. The results of this study indicate that the seed-roasting and storage process have no effect on the fatty acid composition of pumpkin seed oils, but does affect phytosterols and tocopherols. The carotenoid content decreased after storage. The colour of the roasted oil was darker and changed significantly during storage. Pumpkin oil obtained from roasted seeds shows better physicochemical properties and oxidative stability than oil from unroasted seeds.

  7. Oxidative Stability of Marine Phospholipids in the Liposomal Form and Their Applications

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Nielsen, Nina Skall; Timm-Heinrich, M.

    2011-01-01

    source. Due to their tight intermolecular packing conformation at the sn-2 position and their synergism with α-tocopherol present in MPL extracts, they can form stable liposomes which are attractive ingredients for food or feed applications. However, MPL are still susceptible to oxidation as they contain...... large amounts polyunsaturated fatty acids and application of MPL in food and aquaculture industries is therefore a great challenge for researchers. Hence, knowledge on the oxidative stability of MPL and the behavior of MPL in food and feed systems is an important issue. For this reason, this review...... was undertaken to provide the industry and academia with an overview of (1) the stability of MPL in different forms and their potential as liposomal material, and (2) the current applications and future prospects of MPL in both food and aquaculture industries with special emphasis on MPL in the liposomal form....

  8. Element Distribution in the Oxygen-Rich Side-Blow Bath Smelting of a Low-Grade Bismuth-Lead Concentrate

    Science.gov (United States)

    Yang, Tianzu; Xiao, Hui; Chen, Lin; Chen, Wei; Liu, Weifeng; Zhang, Duchao

    2018-03-01

    Oxygen-rich side-blow bath smelting (OSBS) technology offers an efficient method for processing complex bismuth-lead concentrates; however, the element distributions in the process remain unclear. This work determined the distributions of elements, i.e., bismuth, lead, silver, copper, arsenic and antimony, in an industrial-scale OSBS process. The feed, oxidized slag and final products were collected from the respective sampling points and analyzed. For the oxidative smelting process, 65% of bismuth and 76% of silver in the concentrate report to the metal alloy, whereas less lead reports to the metal ( 31%) than the oxidized slag ( 44%). Approximately 50% of copper enters the matte, while more than 63% of arsenic and antimony report to the slag. For the reductive smelting process, less than 4.5% of bismuth, lead, silver and copper in the oxidized slag enter the reduced slag, indicating high recoveries of these metal values.

  9. Effect of unsaponifiable matter extracted from Pistacia khinjuk fruit oil on the oxidative stability of olive oil.

    Science.gov (United States)

    Tavakoli, Javad; Estakhr, Parviz; Jelyani, Aniseh Zarei

    2017-08-01

    The present study was carried out to investigate the improvement of oxidative stability of refined olive oil using various concentrations of unsaponifiable matters extracted from Pistacia khinjuk fruit oil (UFO). For further elucidation of UFO antioxidative power, tertbutylhydroquinone (TBHQ) was used in an olive oil sample, too. Oxidative stability of olive oil samples without and with different levels of UFO (50, 100, 250, 500, 750 and 1000 ppm) and TBHQ (100 ppm) were studied via evaluation of conjugated diene value, carbonyl value, oil/oxidative stability index, acid value and total tocopherol (TT) contents through 8 h thermal process at 170 °C. Results obtained by oxidative stability assays revealed that the highest antioxidative activity of olive oil was obtained by 100 ppm of UFO, followed using 100, 250, 500, 750, and 1000 ppm of UFO and 100 ppm TBHQ, respectively. Evaluation of the relationship between oxidative stability indexes and TT changes indicated a strong correlation (R 2  = 0.9718) between mean relative resistance to oxidation and relative resistance to TT reduction during thermal process. By promotion of relative resistance to TT reduction, olive oil samples' relative resistance to oxidation was enhanced exponentially; implying importance of TT in promotion of oxidative stability of edible oils. The results obtained in this study showed that UFO has higher antioxidative activity compared to TBHQ; thus UFO can be considered as a natural antioxidant with ideal antioxidative activity.

  10. Characteristics and oxidative stability of bread fortified with encapsulated shrimp oil

    OpenAIRE

    Sirima Takeungwongtrakul; Soottawat Benjakul; Aran H-Kittikun

    2015-01-01

    Characteristics and oxidative stability of bread fortified with micro-encapsulated shrimp oil (MSO) were determined. The addition of MSO could improve the loaf volume of bread. Chewiness,gumminess and resilience of resulting bread were decreased. Bread crust and crumb showed higher redness and yellowness when MSO was incorporated (P<0.05). Microstructure study revealed that MSO remained intact with bread crumbs. The addition of MSO up to 3% had no adverse effect on bread quality and sensor...

  11. Stability of Electrical Characteristics of MOS Structures Based on Gallium Oxide

    Science.gov (United States)

    Kalygina, V. M.; Petrova, Yu. S.; Prudaev, I. A.; Tolbanov, O. P.

    2016-10-01

    We present the results of studying the capacitance-voltage and conductance-voltage characteristics of the GaxOy/ GaAs-based metal - oxide - semiconductor structures obtained by thermal evaporation. Influence of the annealing temperature on the characteristics of the structures is established. It is found that at long-term storage in the room atmosphere, the structures do not change their properties, which is manifested in the stability of electrical characteristics.

  12. The Antioxidant Activity and Oxidative Stability of Cold-Pressed Oils

    OpenAIRE

    Prescha, Anna; Grajzer, Magdalena; Dedyk, Martyna; Grajeta, Halina

    2014-01-01

    In our study, we characterized the antioxidant activity and oxidative stability of cold-pressed macadamia, avocado, sesame, safflower, pumpkin, rose hip, Linola, flaxseed, walnut, hempseed, poppy, and milk thistle oils. The radical scavenging activity of the non-fractionated fresh oil, as well as the lipophilic and hydrophilic fractions of the oil was determined using a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. The fatty acid composition of the fresh and stored oils was analyzed by gas chro...

  13. Evaluation of methane oxidation activity in waste biocover soil during landfill stabilization.

    Science.gov (United States)

    He, Ruo; Wang, Jing; Xia, Fang-Fang; Mao, Li-Juan; Shen, Dong-Sheng

    2012-10-01

    Biocover soil has been demonstrated to have high CH(4) oxidation capacity and is considered as a good alternative cover material to mitigate CH(4) emission from landfills, yet the response of CH(4) oxidation activity of biocover soils to the variation of CH(4) loading during landfill stabilization is poorly understood. Compared with a landfill cover soil (LCS) collected from Hangzhou Tianziling landfill cell, the development of CH(4) oxidation activity of waste biocover soil (WBS) was investigated using simulated landfill systems in this study. Although a fluctuation of influent CH(4) flux occurred during landfill stabilization, the WBS covers showed a high CH(4) removal efficiency of 94-96% during the entire experiment. In the LCS covers, the CH(4) removal efficiencies varied with the fluctuation of CH(4) influent flux, even negative ones occurred due to the storage of CH(4) in the soil porosities after the high CH(4) influent flux of ~137 gm(-2) d(-1). The lower concentrations of O(2) and CH(4) as well as the higher concentration of CO(2) were observed in the WBS covers than those in the LCS covers. The highest CH(4) oxidation rates of the two types of soil covers both occurred in the bottom layer (20-30 cm). Compared to the LCS, the WBS showed higher CH(4) oxidation activity and methane monooxygenase activity over the course of the experiment. Overall, this study indicated the WBS worked well for the fluctuation of CH(4) influent flux during landfill stabilization. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Effect of seed quality on oxidative stability of cold-pressed sunflower oil

    Directory of Open Access Journals (Sweden)

    Dimić Etelka B.

    2015-01-01

    Full Text Available The objective of this study was to investigate the impact of the storage time, content of the husk and impurities in the seed mass on the oxidative stability of the cold pressed sunflower oil. The oxidative stability of oil was analyzed by the RSM (Response Surface Methodology, where the response value (output of the model was the content of oxidation products measured via specific absorbance at 232 nm for conjugated dienes and 270 nm for conjugated trienes. Analyses were performed on the fresh oil samples and oil samples tempered under the Schaal-Oven’s test conditions (96 h at 63±2ºC. It was concluded that the seed storage time had significant impact on the primary (A1%232nm and secondary (A1%270nm oil oxidation products, both before (b1-p<0,001; b1-p=0,021 and after (b1-p=0,048; b1-p=0,033 the heating of oil. The content of impurities and husks in the seeds used for pressing also had an influence of the conjugated dienes and trienes contents in both, fresh and heated oil samples. However, their impact was not statistically significant. Interaction of seed storage time, the content of impurities and husks also exert some effect on the values of these quality parameters in the fresh oil as well as in the oil after the heat treatment, even though their influence is not significant. The obtained results have shown that the cold pressed sunflower oil had a good oxidative stability at temperatures up to 63±2ºC.

  15. Stabilization of electrocatalytic metal nanoparticles at metal-metal oxide-graphene triple junction points.

    Science.gov (United States)

    Kou, Rong; Shao, Yuyan; Mei, Donghai; Nie, Zimin; Wang, Donghai; Wang, Chongmin; Viswanathan, Vilayanur V; Park, Sehkyu; Aksay, Ilhan A; Lin, Yuehe; Wang, Yong; Liu, Jun

    2011-03-02

    Carbon-supported precious metal catalysts are widely used in heterogeneous catalysis and electrocatalysis, and enhancement of catalyst dispersion and stability by controlling the interfacial structure is highly desired. Here we report a new method to deposit metal oxides and metal nanoparticles on graphene and form stable metal-metal oxide-graphene triple junctions for electrocatalysis applications. We first synthesize indium tin oxide (ITO) nanocrystals directly on functionalized graphene sheets, forming an ITO-graphene hybrid. Platinum nanoparticles are then deposited, forming a unique triple-junction structure (Pt-ITO-graphene). Our experimental work and periodic density functional theory (DFT) calculations show that the supported Pt nanoparticles are more stable at the Pt-ITO-graphene triple junctions. Furthermore, DFT calculations suggest that the defects and functional groups on graphene also play an important role in stabilizing the catalysts. These new catalyst materials were tested for oxygen reduction for potential applications in polymer electrolyte membrane fuel cells, and they exhibited greatly enhanced stability and activity.

  16. Physical and Oxidative Stability of Uncoated and Chitosan-Coated Liposomes Containing Grape Seed Extract

    Directory of Open Access Journals (Sweden)

    Jochen Weiss

    2013-08-01

    Full Text Available Polyphenol-rich grape seed extract (0.1 w/w% was incorporated in liposomes (1 w/w% soy lecithin by high pressure homogenization (22,500 psi and coated with chitosan (0.1 w/w%. Primary liposomes and chitosan-coated secondary liposomes containing grape seed extract showed good physical stability during 98 days of storage. Most of the polyphenols were incorporated in the shell of the liposomes (85.4%, whereas only 7.6% of the polyphenols of grape seed extract were located in the interior of the liposomes. Coating with chitosan did not change the polyphenol content in the liposomes (86.6%. The uncoated liposomes without grape seed extract were highly prone to lipid oxidation. The cationic chitosan coating, however, improved the oxidative stability to some extent, due to its ability to repel pro-oxidant metals. Encapsulated grape seed extract showed high antioxidant activity in both primary and secondary liposomes, which may be attributed to its polyphenol content. In conclusion, the best chemical stability of liposomes can be achieved using a combination of grape seed extract and chitosan.

  17. Stability of sputter deposited cuprous oxide (Cu2O) subjected to ageing conditions for photovoltaic applications

    Science.gov (United States)

    Camacho-Espinosa, E.; Rimmaudo, I.; Riech, I.; Mis-Fernández, R.; Peña, J. L.

    2018-02-01

    Among various metal oxide p-type semiconductors, cuprous oxide (Cu2O) stands out as a nontoxic and abundant material, which also makes it a suitable candidate as a low-cost absorber for photovoltaic applications. However, the chemical stability of the absorber layer is critical for the solar cell lifetime, in particular, for Cu-based materials, concerning to its oxidation state changes. In this paper, we addressed the Cu2O stability depositing films of 170 nm by reactive radio frequency magnetron sputtering and subsequently ageing them in conditions similar to the typical accelerated life test for the solar module, in a period of time from one to five weeks. The stability of the optical, electrical, and structural properties of the Cu2O thin films was investigated using UV-VIS-near infrared transmittance, 4-probes electrical resistance characterization, high precision profilometry, X-ray photoelectron spectroscopy, and grazing incidence X-ray diffraction. Finally, we demonstrated that the aging tests affected only the surface of the films, while the bulk remained unaltered, making Cu2O a promising candidate for production of stable devices, including solar cells.

  18. Chemical composition and oxidative stability of Tunisian monovarietal virgin olive oils with regard to fruit ripening.

    Science.gov (United States)

    Baccouri, Olfa; Guerfel, Mokhtar; Baccouri, Bechir; Cerretani, Lorenzo; Bendini, Alessandra; Lercker, Giovanni; Zarrouk, Mokhtar; Daoud Ben Miled, Douja

    2008-08-15

    The chemical composition of virgin olive oil may be influenced by genotype and different agronomic (i.e. fruit ripeness degree, water supply) and technological factors. This article reports the evaluation of the influence of the olive ripening stage on the quality indices, the major and the minor components and the oxidative stability of the two main monovarietal Tunisian cultivars (cvv. Chétoui and Chemlali) virgin olive oils. Moreover, the olives cv. Chétoui were tested in a rain-fed control and an irrigation regime. The oils sampled at five different ripeness stages were submitted to liquid chromatographic determination (HPLC-DAD/MSD) of their quali-quantitative phenolic and tocopherolic profiles. Moreover, the triacylglycerol and fatty acid compositions, and minor components such as squalene, pigments and their relation with the oil oxidative stability were evaluated. The tested oils showed very good correlation between the oxidative stability and the concentrations of total phenols, practically secoiridoids and α-tocopherol. Copyright © 2008 Elsevier Ltd. All rights reserved.

  19. Colour Stability and Lipid Oxidation of Beef Longissimus Lumborum under Different Packaging Conditions

    Directory of Open Access Journals (Sweden)

    Bonny Dadji Stéphane Serge

    2017-12-01

    Full Text Available The objective of this study was to investigate the colour stability and lipid oxidation of beef under different packaging methods. The muscles longissimus lumborum were randomly packed in vacuum or modified atmosphere packaging (MAP, 80% O2, 20% CO2. Both packages were aged at 4°C for 7, 14 and 21 days. After each ageing time, samples were displayed in a refrigerator for 2, 4 and 6 days. Colour stability, lipid oxidation and their correlation were determined. Beef under vacuum packaging showed higher a* values on 7, 14, and 21 days of ageing and lower L* values on 14 and 21 days of ageing than beef in MAP (p<0.05. Lower a* values were observed in the samples packed in MAP, then displayed compared to samples packed in vacuum, then displayed after 21 days of ageing time on day 2, 4 and 6 of the display period (p<0.05. Thiobarbituric acid reactive substances (TBARS increased significantly in MAP compared to vacuum during 7, 14, and 21 days of ageing (p<0.05. An increase of TBARS was also observed during display after 14 and 21 days of ageing in samples packed in MAP, then displayed. Furthermore, a significant difference (p<0.05 was observed between samples packed in MAP and vacuum in peroxide value on 14 days of ageing. Lipid oxidation was observed mainly in the samples packed in MAP compared to vacuum, and positively correlated with results on colour stability.

  20. Effect of extraction process on composition, oxidative stability and rheological properties of purslane seed oil.

    Science.gov (United States)

    Delfan-Hosseini, Sasan; Nayebzadeh, Kooshan; Mirmoghtadaie, Leila; Kavosi, Maryam; Hosseini, Seyede Marzieh

    2017-05-01

    Purslane seed oil could be considered as potential nutritious oil due to its desirable fatty acid composition and other biological active compounds. In this study the effect of three extraction procedure including solvent extraction, cold pressing and microwave pretreatment (MW) followed by cold pressing on oil yield, physicochemical properties, oxidative stability and rheological behaviors of oil was investigated. Solvent extracted oil had the highest extraction yield (72.31%). Pretreatment by microwave before cold press extraction resulted in an increase in extraction yield, total phenolic compound (TPC) and antioxidant activity. Cold press extracted oil had the lowest oxidative stability (4.64h). This property was greatly enhanced by microwave irradiation, so that the longest oxidative stability was found in MW-cold press extracted oil with 9.67h. Furthermore, all extracted oils demonstrated Newtonian flow behaviors. MW-cold press extracted oil had the greatest apparent viscosity and highest sensitivity to temperature changes (E a =29.18kJ/mol -1 ). Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics.

    Science.gov (United States)

    Lee, Changsoo; Kim, Na Rae; Koo, Jahyun; Lee, Yung Jong; Lee, Hyuck Mo

    2015-11-13

    In this work, we synthesized uniform Cu-Ag core-shell nanoparticles using a facile two-step process that consists of thermal decomposition and galvanic displacement methods. The core-shell structure of these nanoparticles was confirmed through characterization using transmission electron microscopy, energy-dispersive spectroscopy, and x-ray diffraction. Furthermore, we investigated the oxidation stability of the Cu-Ag core-shell nanoparticles in detail. Both qualitative and quantitative x-ray photoelectron spectroscopy analyses confirm that the Cu-Ag core-shell nanoparticles have considerably higher oxidation stability than Cu nanoparticles. Finally, we formulated a conductive ink using the synthesized nanoparticles and coated it onto glass substrates. Following the sintering process, we compared the resistivity of the Cu-Ag core-shell nanoparticles with that of the Cu nanoparticles. The results of this study clearly show that the Cu-Ag core-shell nanoparticles can potentially be used as an alternative to Ag nanoparticles because of their superior oxidation stability and electrical properties.

  2. Factors affecting the fatty acid composition and fat oxidative stability in pigs

    Directory of Open Access Journals (Sweden)

    Karel Vehovsky

    2015-03-01

    Full Text Available The aim of the study was to evaluate the effect of selected factors affecting fatty acids (FA composition in pig fat. In the experiment, the influence of nutrition, gender, carcass weight, lean meat proportion (LMP and intramuscular fat (IMF were monitored. The effect of diet, specifically the influence of added linseed or corn on the fatty acids composition in the backfat was studied in pigs. From the perspective of the required increase of polyunsaturated fatty acids (PUFA only the addition of the linseed proved to have a significant effect. Another evaluated aspect concerning the FA spectrum was the gender. While the backfat in barrows showed higher (P≤0.05 amount of monounsaturated fatty acids (MUFA, the backfat in gilts displayed a significantly higher proportion (P≤0.01 of the PUFA and total unsaturated fatty acids (UFA. A significant effect on the PUFA proportion has also been demonstrated for the lean meat proportion (LMP parameter, which therefore represents not only a qualitative carcass meat parameter but also plays an important role in relation to the FA composition in the fat in pigs. In connection to the FA proportion changes the study also monitored the fat oxidative stability with the use of the TBARS method. Concerning the oxidative stability the effects of nutrition, FA groups, gender, carcass weight and LMP were studied. The relationship between the above mentioned factors and oxidative stability was found to be insignificant.

  3. Gallic Acid Grafted Chitosan Has Enhanced Oxidative Stability in Bulk Oils.

    Science.gov (United States)

    Gim, Seo Yeong; Hong, Seungmi; Kim, Mi-Ja; Lee, JaeHwan

    2017-07-01

    Gallic acid (GA) was grafted in chitosan and the effects of GA grafted chitosan (GA-g-CS) on the oxidative stability in bulk oil was tested at 60 and 140 °C. To text oxidative stability in oils, headspace oxygen content, conjugated dienoic acid (CDA) value, p-anisidine value (p-AV), and acid value were determined. Chitosan itself did not show antioxidative or prooxidative effects in oils at 60 °C. However, GA-g-CS and GA acted as antioxidants at 60 °C. At 140 °C heating with moisture supplied condition, different results were observed. GA-g-CS acted as antioxidants based on the results of CDA and p-AV. However, chitosan showed the highest oxidative stability based on results of acid value and brown color formation at 140 °C. This could be due to reduction of moisture content by chitosan. GA was continuously released from GA-g-CS in bulk oil. This might have provided extra antioxidant activities to oils. © 2017 Institute of Food Technologists®.

  4. Alkyl caffeates improve the antioxidant activity, antitumor property and oxidation stability of edible oil.

    Directory of Open Access Journals (Sweden)

    Jun Wang

    Full Text Available Caffeic acid (CA is distributed widely in nature and possesses strong antioxidant activity. However, CA has lower solubility in non-polar media, which limits its application in fat-soluble food. To increase the lipophilicity of natural antioxidant CA, a series of alkyl caffeates were synthesized and their antioxidant and antitumor activities were investigated. The antioxidant parameters, including the induction period, acid value and unsaturated fatty acid content, of the alkyl caffeates in edible oil were firstly investigated. The results indicated that alkyl caffeates had a lower DPPH IC₅₀ (14-23 µM compared to CA, dibutyl hydroxy toluene (BHT and Vitamin C (24-51 µM, and significantly inhibited four human cancer cells (SW620, SW480, SGC7901 and HepG2 with inhibition ratio of 71.4-78.0% by a MTT assay. With regard to the induction period and acid value assays, methyl and butyl caffeates had higher abilities than BHT to restrain the oxidation process and improve the stability of edible oil. The addition of ethyl caffeate to oil allowed maintenance of a higher unsaturated fatty acid methyl ester content (68.53% at high temperatures. Overall, the alkyl caffeats with short chain length (n<5 assessed better oxidative stability than those with long chain length. To date, this is the first report to the correlations among the antioxidant activity, anticancer activity and oxidative stability of alkyl caffeates.

  5. Oxidative stability and estimate of the shelf life of sacha inchi (Plukenetia volubilis L. oil

    Directory of Open Access Journals (Sweden)

    Gilbert Rodríguez

    2015-09-01

    Full Text Available Sacha inchi oil is rich in polyunsaturated fatty acids that may rust, limiting their shel flife. The Rancimat method is official, for evaluations of oxidative stability accelerated in oils. Industrially conventional techniques based on physical and chemical indicators are used; there are no studies of correlation between them and Rancimat. This work has for objective correlate the oxidative stability index (OSI Sacha inchi oil obtained by Rancimat at temperatures of 80°, 90°, 100° and 110 °C under an air flow of 15 L/h, with the values of physic-chemical indicators such as Index peroxide, p-anisidine, totox and density. Also estimated by mathematical extrapolation, the shelf life of sacha inchi oil to usual storage temperatures. OSI values were: 0.493 ± 0.01 h at 110 ºC, 1.590 ± 0.06 h at 100 ºC, 4.645 ± 0.1 h at 90 ºC and 20.512 ± 0.02 h at 80 ºC. High correlation has been established between values of OSI vs physicochemical quality indices (0.9322 < r < 0.9965. The activation energy was found 137.90 kJ/mol, which explains the high oxidative stability for the oil, estimating a lifetime of 3.29, 1.79 and 0.79 years at 20, 25 and 30 °C respectively.

  6. Testing and improving the redox stability of Ni-based solid oxide fuel cells

    DEFF Research Database (Denmark)

    Pihlatie, Mikko; Ramos, Tania; Kaiser, Andreas

    2009-01-01

    cells. When the symmetric cells are reduced and redox cycled isothermally at 850 °C, no major change in the serial or polarisation resistance of the cell and electrodes was measured. When the cells are, after the similar initial reduction treatment, redox cycled at 650 °C, the serial resistance remains......Despite active development, solid oxide fuel cells (SOFCs) based on Ni-YSZ anodes still suffer from thermomechanical instability under conditions where the anode side is exposed to oxidising conditions at high temperature. In the first part of the paper, structures and solutions, which could...... improve the redox stability of Ni-YSZ anode supported SOFC's in terms of dimensional and mechanical stability are reported. Porosity is identified as a major microstructural parameter linked to the dimensional and structural stability during redox cycling. The cumulative redox strain (CRS) after three...

  7. Differential scanning calorimetry thermal properties and oxidative stability indices of microwave heated extra virgin olive oils.

    Science.gov (United States)

    Chiavaro, Emma; Rodriguez-Estrada, Maria Teresa; Bendini, Alessandra; Rinaldi, Massimiliano; Cerretani, Lorenzo

    2011-01-30

    The use of differential scanning calorimetry (DSC) for assessing the deterioration effect of microwave heating on vegetable oils, and on olive oils in particular, has been partially explored in literature. The aim of this work was to evaluate the potential of DSC to discriminate among microwaved extra virgin olive oils (EvOo from different olive cultivar and origin), according to changes on thermal properties (upon cooling and heating) and traditional oxidative stability indices (peroxide, p-anisidine and TOTOX values). An elevated value of lipid oxidation was reached by the most unsaturated EvOo sample (9.5% of linoleic acid) at 6 min of microwave treatment. Free acidity significantly increased (0.42%) only for the oil sample with the highest water content (874 mg kg(-1) oil) at the longest time of treatment. Crystallisation enthalpies significantly decreased and the major exothermic peak shifted towards lower temperature, leading to enlargement of the transition range in all samples due to the formation of weak and mixed crystals among triacylglycerols and lipid degradation products. On the contrary, thermal properties upon heating appeared to similarly vary among samples. The analysis of DSC thermal properties upon cooling seemed to clearly discriminate among different EvOo samples after microwaving. The relation between changes of thermal properties and oxidation parameters should be further studied using additional oxidative stability indices on a larger set of oil samples, due to the complexity of EvOo composition. 2010 Society of Chemical Industry.

  8. Pattern formation in single-phase FAC. A stability analysis of an oxide layer

    Energy Technology Data Exchange (ETDEWEB)

    Zinemanas, Daniel [The Israel Electric Corp., Haifa (Israel). Dept. of Chemistry; Herszage, Amiel [The Israel Electric Corp., Haifa (Israel). Dept. of Energy Technologies Development

    2013-03-15

    Pattern formation is a salient characteristic of the flow-accelerated corrosion process, particularly in single-phase flow, where a typical ''orange peel'' surface texture is normally formed. The process of such pattern formation is, however, not well understood. In order to gain some insight into the role of the various processes and parameters involved in this process, a linear stability analysis of an oxide layer based on the Sanchez-Caldera model was performed. According to the results obtained in this study, it follows that the oxide layer is stable regarding perturbations of the oxide thickness or the reaction constant, but it is unstable in respect to perturbations of the mass transfer coefficient. These results suggest therefore that the flow, and not local surface in homogeneities, plays a central role in the pattern formation process. (orig.)

  9. Depth of the permeation of the radiation-induced oxidation reaction in polymers in the presence of stabilizers

    International Nuclear Information System (INIS)

    Gorelik, B.A.; Sokolova, L.A.; Grigor'ev, A.G.; Koshelev, S.D.

    1991-01-01

    A model of radiation oxidation of polymers (PP, LDPE) in the presence of stabilizers, permitting to determine the layer in the polymer, in which reactions with participation of peroxide radicals are developed, is presented. When material is irradiated with a powerful radiation dose, the introduction of a stabilizer results in the increse of the reaction penetration depth. For lower dose rates the depth of radiation oxidation penetration can be considerably higher in the material stabilized as compared with pure polymer. Experimental testing of the scheme suggested for PP stabilized by ionol was carried out

  10. New bismuth borophosphate Bi4BPO10: Synthesis, crystal structure, optical and band structure analysis

    International Nuclear Information System (INIS)

    Babitsky, Nicolay A.; Leshok, Darya Y.; Mikhaleva, Natalia S.; Kuzubov, Aleksandr A.; Zhereb, Vladimir P.; Kirik, Sergei D.

    2015-01-01

    New bismuth borophosphate Bi 4 BPO 10 was obtained by spontaneous crystallization from the melt of correspondent composition at 804 °C. Crystal structure with orthorhombic lattice parameters: a = 22.5731(3) Å, b = 14.0523(2) Å, c = 5.5149(1) Å, V = 1749.34(4), Z = 8, SG Pcab was determined by X-ray powder diffraction technique. The [Bi 2 O 2 ] 2+ -layers, which are typical for bismuth oxide compounds, transform into cationic endless strips of 4 bismuth atoms width directed along the c-axis in Bi 4 BPO 10 . The strips combining stacks are separated by flat triangle [BO 3 ] 3− -anions within stacks. Neighboring stacks are separated by tetrahedral [PO 4 ] 3− -anions and shifted relatively to each other. Bismuth atoms are placed in 5–7 vertex oxygen irregular polyhedra. Bi 4 BPO 10 is stable up to 812 °C, then melts according to the peritectic law. The absorption spectrum in the range 350–700 nm was obtained and the width of the forbidden band was estimated as 3.46 eV. The band electronic structure of Bi 4 BPO 10 was modeled using DFT approach. The calculated band gap (3.56 eV) is in good agreement with the experimentally obtained data. - Graphical abstract: Display Omitted - Highlights: • New bismuth borophosphate with composition Bi 4 BPO 10 was synthesized. • The crystal structure was determined by X-ray powder diffraction technique. • Bismuth-oxygen part [Bi 4 O 3 ] 6+ forms endless strips of 4 bismuth atoms width. • Electronic structure was modeled by DFT method. • The calculated band gap (3.56 eV) is very close to the experimental one (3.46 eV)

  11. Crystal growth of bismuth tungstate

    Energy Technology Data Exchange (ETDEWEB)

    De L' Eprevier, A. G.; Shukla, V. N.; Payne, D. A.

    1979-01-01

    Bi/sub 2/WO/sub 6/ is a polar material in the bismuth titanate family, Bi/sub 2/M/sub n-1/R/sub n/0/sub 3n+3/. Additions of NaF to a Na/sub 2/WO/sub 4/ - WO/sub 3/ flux yielded large single crystals up to 0.8 mm thick, which were free of inclusions. Total impurities were less than 500 ppM, and the crystals were single domain.

  12. Infrared spectra of U.S. automobile original finishes (post - 1989). VIII: In situ identification of bismuth vanadate using extended range FT-IR spectroscopy, Raman spectroscopy, and X-ray fluorescence spectrometry.

    Science.gov (United States)

    Suzuki, Edward M

    2014-03-01

    Chrome Yellow (PbCrO4 ·xPbSO4 ) was a common pigment in U.S. automobile OEM finishes for more than three decades, but in the early 1990s its use was discontinued. One of its main replacements was Bismuth Vanadate (BiVO4 ·nBi2 MoO6 , n = 0-2), which was commercially introduced in 1985, as this inorganic pigment also produces a very bright hue and has excellent outdoor durability. This paper describes the in situ identification of Bismuth Vanadate in automotive finishes using FT-IR and dispersive Raman spectroscopy and XRF spectrometry. Some differentiation of commercial formulations of this pigment is possible based on far-infrared absorptions, Raman data, and elemental analysis. The spectral differences arise from the presence or absence of molybdenum, the use of two crystal polymorphs of BiVO4 , and differences in pigment stabilizers. Bismuth Vanadate is usually not used alone, and it is typically found with Isoindoline Yellow, hydrous ferric oxide, rutile, Isoindolinone Yellow 3R, or various combinations of these. © 2013 American Academy of Forensic Sciences.

  13. Effect of different phytogenic additives on oxidation stability of chicken meat

    Directory of Open Access Journals (Sweden)

    Marek Bobko

    2016-05-01

    Full Text Available The aim of the study was to evaluate the oxidative stability (TBARS method of breast and thigh muscle after application of feed mixtures enriched by phytogenic additives. The experiment started with 150 pieces one-day-old chicks of Cobb 500 hybrid combination. They were divided into one control (C and two experimental groups (1st EG and 2nd EG. Each group included 50 chicks. In experimental groups, feed additives were applied as followed: 100 mg.kg-1 Agolin Poultry (in the 1st EG and 500 mg.kg-1 Agolin Tannin Plus (in the 2nd EG. Experimental broiler chickens were fed during 42 days by ad libitum. Chicken meat samples of breast and thigh muscle were analysed in the 1st day, 1st, 2nd, 3rd, 4th, 5th and 6th month of storage in frozen storage at -18 °C. We recorded positive influence on chicken meat oxidative stability in all experimental groups with application of phytogenic feed additives. Obtained results showed that applied phytogenic additives had positive influence on oxidative stability of breast and thigh muscles. At the end of frozen storage (in 6th month, we found higher malondialdehyde (MDA values and lower oxidative stability (p <0.05 of breast muscle in control group (0.167 mg.kg-1 compared to experimental groups (from 0.150 mg.kg-1 in 1. EG to 0.155 mg.kg-1 in 2. EG. In the thigh muscle, we found similar tendency of oxidative changes as in the breast muscle. At the end of frozen storage (in the 6th month, MDA average values of thigh muscle were higher (p <0.05 in control group (0.181 mg.kg-1 compared to experimental groups (1. EG 0.164 mg.kg-1 and 2. EG 0.169 mg.kg-1. Significant differences (p <0.05 between the control and experimental groups were found from the 5th month of storage in thigh and breast muscle. Obtained results indicate positive influence of phytogenic additives applied in chicken nutrition, namely on stabilization of fatty substance to degradation processes. Normal 0 21 false false false SK X-NONE X-NONE Normal 0

  14. OXIDATIVE STABILITY OF CHICKEN MEAT AFTER APPLICATION PHYTOGENIC ADDITIVES IN THEIR DIET

    Directory of Open Access Journals (Sweden)

    Marek Bobko

    2015-02-01

    Full Text Available The aim of the study was to evaluate the oxidative stability (TBARS method of breast and thigh muscle after application of feed mixtures enriched by phytogenic additives. The experiment started with 250 pieces one-day-old chicks of Cobb 500 hybrid combination. They were divided into one control (C and four experimental groups (1st EG, 2nd EG, 3rd EG, 4th EG. Each group included 50 chicks. In experimental groups, feed additives were applied as followed: 100 mg kg-1 Agolin Poultry (in the 1st EG, 500 mg kg-1 Agolin Tannin Plus (in the 2nd EG, 1000 mg kg-1 Biostrong 510 + FortiBac (in the 3rd EG and 1000 mg kg-1 Agolin Acid (in the 4th EG. We recorded positive influence on chicken meat oxidative stability in all experimental groups with application of plant feed additives. Experimental broiler chickens were fed during 42 days by ad libitum. Chicken meat samples of breast and thigh muscle were analyzed in the 1st, 3rd, 5th and 7th day of storage in cold conditions at 4 °C. Obtained results showed that applied phytogenic additives had positive influence on oxidative stability of breast and thigh muscles. At the end of cold store (in 7th day, we found higher malondialdehyde (MDA values and lower oxidative stability (P<0.05 of breast muscle in control group (0.157 mg kg-1 compared to experimental groups (from 0.124 mg kg-1 in the 3rd EG to 0.133 mg kg-1 in the 1st EG. In the thigh muscle, we found similar tendency of oxidative changes as in the breast muscle. At the end of cold store (in the 7th day, MDA average values of thigh muscle were higher (P<0.05 in control group (0.179 mg kg-1 compared to experimental groups (from 0.136 mg kg-1 in the 4th EG to 0.141 mg kg-1 in the 1st EG. Significant differences (P<0.05 between the control and experimental groups were found from the 5th day of storage in thigh muscle in contrast to breast muscle. Obtained results indicate positive influence of phytogenic additives applied in chicken nutrition, namely on

  15. Structural investigations of bismuth lead borosilicate glasses under the influence of gamma irradiation through ultrasonic studies

    Science.gov (United States)

    Bootjomchai, Cherdsak; Laopaiboon, Jintana; Laopaiboon, Raewat

    2012-04-01

    The ultrasonic velocity measurements for different compositions of irradiated bismuth lead borosilicate glasses xBi2O3-(50-x)PbO-20B2O3-30SiO2 (x=2, 4, 6, 8, and 10 mol.%) were performed at room temperature using pulse-echo technique. Densities of glass samples were measured by Archimedes' principle using n-hexane as the immersion liquid. The results from the studies show that ultrasonic velocity, elastic moduli, Poisson's ratio, microhardness, and the Debye temperature increase with increasing bismuth oxide content and increasing gamma-radiation dose (3-12 Gy).

  16. Stability under irradiation of a fine dispersion of oxides in a ferritic matrix

    International Nuclear Information System (INIS)

    Monnet, I.

    1999-01-01

    Oxide dispersion strengthened (ODS) ferritic-martensitic steels are being considered for high temperature, high fluence nuclear applications, like fuel pin cladding in Fast Breeder Reactors. ODS alloys offer improved out of pile strength characteristics at temperature above 550 deg.C and ferritic-martensitic matrix is highly swelling resistant. A clad in an ODS ferritic steel, call DY (Fe-13Cr-1,5Mo+TiO 2 +Y 2 O 3 ) has been irradiated in the experimental reactor Phenix. Under irradiation oxide dissolution occurs. Microstructural observations indicated that oxide evolution is correlated with the dose and consist in four phenomena: the interfaces of oxide particles with the matrix become irregular, the uniform distribution of the finest oxide ( 2 O 3 , Y 2 O 3 , MgO or MgAl 2 O 4 . These materials were irradiated with charged particles in order to gain a better understanding of the mechanisms of dissolution. Irradiation with 1 MeV Helium does not induce any modification, neither in the chemical modification of the particles nor in their spatial and size distribution. Since most of the energy of helium ions is lost by inelastic interaction, this result proves that this kind of interaction does not induce oxide dissolution. Irradiation with 1 MeV or 1.2 MeV electrons leads to a significant dissolution with a radius decrease proportional to the dose. These experiments prove that oxide dissolution can be induced by Frenkel pairs alone, provided that metallic atoms are displaced. The comparison between irradiation with ions (displacements cascades) and electrons (Frenkel pairs only) shows the importance of free point defects in the dissolution phenomena. For all the irradiations (ions or electrons) the spinel MgAl 2 O 4 seems more resistant than Y 2 O 3 to dissolution, and MgO and Al 2 O 3 are even less resistant. This is the order of stability under irradiation of bulk oxides. (author)

  17. Bismuth ions are metabolized into autometallographic traceable bismuth-sulphur quantum dots

    Directory of Open Access Journals (Sweden)

    M Stoltenberg

    2009-06-01

    Full Text Available Bismuth – sulphur quantum dots can be silver enhanced by autometallography (AMG. In the present study, autometallographic silver enhanced bismuth-sulphur nanocrystals were isolated from unfixed cryo-sections of kidneys and livers of rats exposed to bismuth (Bi207 subnitrate. After being subjected to AMG all the organic material was removed by sonication and enzymatic digestion and the silver enhanced Bi- S quantum dots spun down by an ultracentrifuge and analyzed by scintillation. The analysis showed that the autometallographic technique traces approximately 94% of the total bismuth. This implies that the injected bismuth is ultimately captured in bismuthsulphur quantum dots, i.e., that Bi-S nanocrystals are the end product of bismuth metabolism

  18. Characterization and re-activation of oxygen sensors for use in liquid lead-bismuth

    International Nuclear Information System (INIS)

    Kurata, Yuji; Abe, Yuji; Futakawa, Masatoshi; Oigawa, Hiroyuki

    2010-01-01

    Control of oxygen concentration in liquid lead-bismuth is one of the most important tasks to develop accelerator driven systems. In order to improve the reliability of oxygen sensors, re-activation treatments were investigated as well as characterization of oxygen sensors for use in liquid lead-bismuth. The oxygen sensor with a solid electrolyte of yttria-stabilized zirconia and a Pt/gas reference electrode showed almost the same electromotive force values in gas and liquid lead-bismuth, respectively, as the theoretical ones at temperatures above 400 deg. C or 450 deg. C. After long-term use of 6500 h, the outputs of the sensor became incorrect in liquid lead-bismuth. The state of the sensor that indicated incorrect outputs could not be recovered by cleaning with a nitric acid. However, it was found that the oxygen sensor became a correct sensor indicating theoretical values in liquid lead-bismuth after re-activation by the Pt-treatment of the outer surface of the sensor.

  19. Colloidal stability of iron oxide nanocrystals coated with a PEG-based tetra-catechol surfactant.

    Science.gov (United States)

    Mondini, Sara; Drago, Carmelo; Ferretti, Anna M; Puglisi, Alessandra; Ponti, Alessandro

    2013-03-15

    Long-term colloidal stability of magnetic iron oxide nanoparticles (NPs) is an important goal that has not yet been fully achieved. To make an advance in our understanding of the colloidal stability of iron oxide NPs in aqueous media, we prepared NPs comprising a monodisperse (13 nm) iron oxide core coated with a PEG-based (PEG: polyethyleneglycol) surfactant. This consists of a methoxy-terminated PEG chain (MW = 5000 Da) bearing four catechol groups via a diethylenetriamine linker. The surfactant was grafted onto the nanocrystals by ligand exchange monitored by infrared spectroscopy. The colloidal stability of these nanoparticles was probed by monitoring the time evolution of the Z-average intensity-weighted radius R(h) and volume-weighted size distribution P(v) obtained from analysis of dynamic light scattering data. The nanoparticles showed no sign of aggregation for four months in deionized water at room temperature and also when subjected to thermal cycling between 25 and 75 °C. In 0.01 M PBS (phosphate buffered saline), aggregation (if any) is slow and partial; after 66 h, about 50% of NPs have not aggregated. Aggregation is more effective in 0.15 M NH(4)AcO buffer, where isolated particles are not observed after 66 h, and especially in acidic NH(4)AcO/AcOH buffer, where aggregation is complete within 1 h and precipitation is observed. The differing stability of the NPs in the above aqueous media is closely related to their ζ potential.

  20. Structure, stability and electrochromic properties of polyaniline film covalently bonded to indium tin oxide substrate

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Wenzhi, E-mail: zhangwz@xatu.edu.cn [Key Laboratory for Photoelectric Functional Materials and Devices of Shaanxi Province, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021 (China); Ju, Wenxing; Wu, Xinming; Wang, Yan; Wang, Qiguan; Zhou, Hongwei; Wang, Sumin [Key Laboratory for Photoelectric Functional Materials and Devices of Shaanxi Province, School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021 (China); Hu, Chenglong [Key Laboratory of Optoelectronic Chemical Materials and Devices of Ministry of Education, School of Chemistry and Environmental Engineering, Jianghan University, Wuhan 430056 (China)

    2016-03-30

    Graphical abstract: A chemical bonding approach was proposed to prepare the PANI film covalently bonded to ITO substrate and the film exhibited high electrochemical activities and stability compared with that obtained by conventional film-forming approach. - Highlights: • The PANI film covalently bonded to ITO substrate was prepared using ABPA as modifier. • The oxidative potentials of the obtained PANI film were decreased. • The obtained PANI film exhibits high electrochemical activities and stability. - Abstract: Indium tin oxide (ITO) substrate was modified with 4-aminobenzylphosphonic acid (ABPA), and then the polyaniline (PANI) film covalently bonded to ITO substrate was prepared by the chemical oxidation polymerization. X-ray photoelectron spectroscopy (XPS), attenuated total reflection infrared (ATR-IR) spectroscopy, and atomic force microscopy (AFM) measurements demonstrated that chemical binding was formed between PANI and ABPA-modified ITO surface, and the maximum thickness of PANI layer is about 30 nm. The adhesive strength of PANI film on ITO substrate was tested by sonication. It was found that the film formed on the modified ITO exhibited a much better stability than that on bare one. Cyclic voltammetry (CV) and UV–vis spectroscopy measurements indicated that the oxidative potentials of PANI film on ABPA-modified ITO substrate were decreased and the film exhibited high electrochemical activities. Moreover, the optical contrast increased from 0.58 for PANI film (without ultrasound) to 1.06 for PANI film (after ultrasound for 60 min), which had an over 83% enhancement. The coloration time was 20.8 s, while the bleaching time was 19.5 s. The increase of electrochromic switching time was due to the lower ion diffusion coefficient of the large cation of (C{sub 4}H{sub 9}){sub 4}N{sup +} under the positive and negative potentials as comparison with the small Li{sup +} ion.

  1. Effect of oxygen level on the oxidative stability of two different retail pork products stored using modified atmosphere packaging (MAP)

    DEFF Research Database (Denmark)

    Spanos, Dimitrios; Ann Tørngren, Mari; Christensen, Mette

    2016-01-01

    The characteristics and the oxidative stability of pork steaks and of pork mince were investigated during 2, 5 and 7 days of refrigerated storage using oxygen (O2) levels of 0%, 20%, 50% and 80% in modified atmosphere packaging (MAP). Steaks stored during 7 days were not affected by an increase...... in O2 concentration, as revealed by lipid and protein oxidation markers. In contrast, the mince was characterised by an altered protein profile, loss of free thiol groups and increased protein oxidation, early during storage. The oxidative stability of pork mince was improved by using intermediate (50......%) O2 MAP. The results show that fresh pork products are affected differently by the MAP O2 concentration and strongly indicate that optimisation of MAP based on the retail product type would be of considerable benefit to their oxidative stability....

  2. Effect of oxygen level on the oxidative stability of two different retail pork products stored using modified atmosphere packaging (MAP).

    Science.gov (United States)

    Spanos, Dimitrios; Tørngren, Mari Ann; Christensen, Mette; Baron, Caroline P

    2016-03-01

    The characteristics and the oxidative stability of pork steaks and of pork mince were investigated during 2, 5 and 7days of refrigerated storage using oxygen (O2) levels of 0%, 20%, 50% and 80% in modified atmosphere packaging (MAP). Steaks stored during 7days were not affected by an increase in O2 concentration, as revealed by lipid and protein oxidation markers. In contrast, the mince was characterised by an altered protein profile, loss of free thiol groups and increased protein oxidation, early during storage. The oxidative stability of pork mince was improved by using intermediate (50%) O2 MAP. The results show that fresh pork products are affected differently by the MAP O2 concentration and strongly indicate that optimisation of MAP based on the retail product type would be of considerable benefit to their oxidative stability. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Radio-sensitization of animals by bismuth

    International Nuclear Information System (INIS)

    Pierotti, T.; Verain, A.

    1969-01-01

    Digestive absorption of bismuth by animals leads to radio-sensitization. This effect is very marked when the X-rays used are centered on the absorption line of bismuth. This work has involved the use of more than 2000 C3H/JAX mice, and has shown that a maximum lethal effect, with respect to the standard, occurs for bismuth sub-nitrate doses of the order of 3 g/kg and for exposures of 700 R. For stronger or weaker doses, the sensitization effect is less marked. (authors) [fr

  4. Aqueous starch as a stabilizer in zinc oxide nanoparticle synthesis via laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Zamiri, Reza; Zakaria, Azmi [Department of Physics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Ahangar, Hossein Abbastabar [Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Darroudi, Majid [Advanced Materials and Nanotechnology Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Zak, Ali Khorsand [Low Dimensional Material Research Center, Department of Physics, University of Malaya, Kuala Lumpur 50603 (Malaysia); Drummen, Gregor P.C., E-mail: gpcdrummen@bionano-solutions.de [Bionanoscience and Bio-Imaging Program, Cellular Stress and Ageing Program, Bio and Nano-Solutions, D-40472 Duesseldorf (Germany)

    2012-03-05

    Highlights: Black-Right-Pointing-Pointer Zinc oxide nanoparticles were synthesized via LASiS in aqueous starch solution. Black-Right-Pointing-Pointer Nanoparticles of {+-}15 nm are produced with a narrow size distribution. Black-Right-Pointing-Pointer Starch can be used as a template to control nanoparticle size. Black-Right-Pointing-Pointer Starch stabilizes zinc oxide nanoparticles in solution through steric hindrance. - Abstract: Zinc oxide is a semiconductor with exceptional thermal, luminescent and electrical properties, even compared with other semiconducting nanoparticles. Its potential for advanced applications in lasers and light emitting diodes, as bio-imaging agent, in biosensors and as drug delivery vehicles, in ointments, coatings and pigments has pulled zinc oxide into the focus of various scientific and engineering research fields. Recently we started investigating if nanoparticle synthesis via laser ablation in the presence of natural stabilizers allows control over size and shape and constitutes a useful, uncomplicated alternative over conventional synthesis methods. In the current paper, we determined the ability of natural starch to act as a size controller and stabilizer in the preparation of zinc oxide nanoparticles via ablation of a ZnO plate in a starch solution with a nanosecond Q-Switched Nd:YAG pulsed laser at its original wavelength ({lambda} = 1064 nm). Our results show that the particle diameter decreases with increasing laser irradiation time to a mean nanoparticle size of approximately 15 nm with a narrow size distribution. Furthermore, the obtained particle size in starch solution is considerably smaller compared with analogous ZnO nanoparticle synthesis in distilled water. The synthesized and capped nanoparticles retained their photoluminescent properties, but showed blue emission rather than the often reported green luminescence. Evaluation of old preparations compared with freshly made samples showed no agglomeration or

  5. Basic principles of lead and lead-bismuth eutectic application in blanket of fusion reactors

    International Nuclear Information System (INIS)

    Beznosov, A.V.; Pinaev, S.S.; Muraviev, E.V.; Romanov, P.V.

    2005-01-01

    High magnetohydrodynamic pressure drop is an important issue for liquid metal blanket concepts. To decrease magnetohydrodynamic resistance authors propose to form insulating coatings on internal surface of blanket ducts at any moment of fusion reactor exploitation. It may be achieved easily if lead or lead-bismuth eutectic is used and technology of oxidative potential handling is applied. A number of experiments carried out in NNSTU show the availability of the proposed technology. It bases on formation of the insulating coatings that consist of the oxides of components of the structural materials and of the coolant components. In-situ value of the insulating coatings characteristics ρδ is ∼ 10 -5 Ohm·m 2 for steels and 5,0x10 -6 - 5,0x10 -5 Ohm·m 2 for vanadium alloys. Thermal cycling is possible during exploitation of a blanket. The experimental research of the insulating coatings properties during thermal cycling have shown that the coatings formed into the lead and lead-bismuth coolants save there insulating properties. Experience of many years is an undoubted advantage of the lead-bismuth coolant and less of the lead coolant in comparison with lithium. Russian Federation possesses of experience of exploitation of the research and industrial facilities, of experience of creation of the pumps, steamgenerators and equipment with heavy liquid metal coolants. The unique experience of designing, assembling and exploitation of the fission reactors with lead-bismuth coolant is also available. The problem of technology of lead and lead-bismuth coolants for power high temperature radioactive facilities has been solved. Accidents, emergency situations such as leakage of steamgenerators or depressurization of gas system in facilities with lead and lead-bismuth coolants have been explored and suppressed. (author)

  6. Effect of cinnamaldehyde on oxidative stability of several fats and oils at elevated temperatures

    Directory of Open Access Journals (Sweden)

    Tuğba İnanç Horuz

    2015-12-01

    Full Text Available Natural antioxidants recently have gained popularity since synthetic ones have toxic and carcinogenic effects. In the present study, effect of temperature (120, 150 and 180°C and cinnamaldehyde on oxidative stability of several oils (olive, hazelnut and palm oils and fats (milkfat and butter was examined. In order to compare the results with the synthetic antioxidant, butylated hydroxy toluene (BHT was used at a concentration of 200 ppm. This level is the legal maximum limit allowed. Experiments were conducted by using a PetroOxy device, a rapid small scale oxidation stability test. According to induction time values obtained by PetroOxy device, the stability of oils drastically decreased with increasing temperature. Cinnamaldehyde had no significant effect (p > 0.05 on all fat and oil samples compared to control (no antioxidant added and BHT added samples. BHT significantly increased induction times of all fat and oil samples at lower temperatures. However, it was not effective at 180°C (p < 0.05. It can be concluded that cinnamaldehyde could not be considered as a good alternative to BHT for preservation of fats and oils at high temperatures.

  7. The Influence of Naringin or Hesperidin Dietary Supplementation on Broiler Meat Quality and Oxidative Stability.

    Directory of Open Access Journals (Sweden)

    Michael Goliomytis

    Full Text Available An experiment was conducted to examine the effects of supplementing broiler feed with hesperidin or naringin, on growth performance, carcass characteristics, breast meat quality and the oxidative stability of breast and thigh meat. Two hundred and forty 1-day-old Ross 308 broiler chickens were randomly assigned to 6 groups. One of the groups served as a control (C and was given commercial basal diets, whereas the other five groups were given the same diets further supplemented with naringin at 0.75 g/kg (N1, naringin at 1.5 g/kg (N2, hesperidin at 0.75 g/kg (E1, hesperidin at 1.5 g/kg (E2 and a-tocopheryl acetate at 0.2 g/kg (E. At 42 days of age, 10 chickens per treatment group were slaughtered for meat quality and oxidative stability assessment. No significant differences were observed among groups in final body weight, carcass weight and internal organs weights (P>0.05 apart from liver that decreased linearly with increased levels of naringin (P-linear0.05. Measurement of lipid oxidation values showed that after hesperidin and naringin dietary supplementation, malondialdehyde values decreased in tissue samples in a dose depended manner (P-linear<0.05. In conclusion, hesperidin and naringin, positively influence meat antioxidative properties without negative implications on growth performance and meat quality characteristics in poultry, thus appearing as important additives for both the consumer and the industry.

  8. Evaluation of the oxidative stability of Chipotle chili (Capsicum annuum L. oleoresins in avocado oil

    Directory of Open Access Journals (Sweden)

    L. Cerecedo-Cruz

    2018-03-01

    Full Text Available Capsicum annuum L. (Chipotle chili is a natural source of bioactive metabolites with antioxidant properties. The objective of this research was to obtain and characterize the oxidative stability under storage of Chipotle chili oleoresins extracted with cold-pressed avocado oil. The most efficient conditions obtained to extract carotenoids and phenolic compounds were at 1:3 ratio (chipotle chili: avocado oil; w:v at room temperature in darkness during 48 h. At the end of the harshest conditions (45 °C, 30 days, the extracts were stable to lipid oxidation with a final Totox value of 27.34, a carotenoid preservation of 85.6%, antioxidant activity retention of 80.66% and a color change (ΔE of 1.783. The kinetic constants obtained were higher for peroxide formation than for carotenoid degradation. The oleoresins obtained could be considered an economic and sustainable alternative to extract carotenoids with good oxidation stability that could be used in foodstuffs.

  9. Toxicity, toxicokinetics and biodistribution of dextran stabilized Iron oxide Nanoparticles for biomedical applications.

    Science.gov (United States)

    Remya, N S; Syama, S; Sabareeswaran, A; Mohanan, P V

    2016-09-10

    Advancement in the field of nanoscience and technology has alarmingly raised the call for comprehending the potential health effects caused by deliberate or unintentional exposure to nanoparticles. Iron oxide magnetic nanoparticles have an increasing number of biomedical applications and hence a complete toxicological profile of the nanomaterial is therefore a mandatory requirement prior to its intended usage to ensure safety and to minimize potential health hazards upon its exposure. The present study elucidates the toxicity of in house synthesized Dextran stabilized iron oxide nanoparticles (DINP) in a regulatory perspective through various routes of exposure, its associated molecular, immune, genotoxic, carcinogenic effects and bio distribution profile. Synthesized ferrite nanomaterials were successfully coated with dextran (nanoparticles with dextran helps in improvising particle stability in biological environments. The nanoparticles do not seem to induce oxidative stress mediated toxicological effects, nor altered physiological process or behavior changes or visible pathological lesions. Furthermore no anticipated health hazards are likely to be associated with the use of DINP and could be concluded that the synthesized DINP is nontoxic/safe to be used for biomedical applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Oxidation and Free Radical Decay in Vitamin E-stabilized, Radiation Cross-linked UHMWPE

    International Nuclear Information System (INIS)

    Oral, E.

    2006-01-01

    A novel a-tocopherol (vitamin E, α-T)-stabilized, cross-linked ultra-high molecular weight polyethylene (UHMWPE) (αTPE) was developed for total joint arthroplasty as a bearing surface with low wear and improved mechanical properties. Accelerated aging showed α-T protects irradiated UHMWPE against oxidation. However, accelerated aging may not truly reflect in vivo and shelf oxidation. We used real-time aging to monitor the evolution of oxidation and free radical signals of α-T to determine the mechanism of oxidative stability. UHMWPE blocks (30x30x10 mm) were machined and γ-irradiated (85 kGy) in argon. The blocks were doped in α-T for 5 hours at 120 degree and homogenized for 64 hours at 120 degree in argon, packaged in vacuum and γ-sterilized (25 kGy). Samples were aged in air at room temperature, in air at 40 degree and in water at 40 degree. Measurements were at 1, 2, 3, 4 and 7 months. Sections cut from the aged blocks (150μm) were boiled in hexane overnight to extract free species and evaluated by FTIR. Oxidation indices were calculated by taking the area under the carbonyl peak and normalizing it to a skeletal peak. ESR was used to determine the content and type of free radicals. Control was 100-kGy irradiated, unstabilized UHMWPE. αTPE showed a small amount of oxidation, which stabilized after 2 months. This indicated that the decay of the hydroperoxides formed by the reaction of the residual free radicals with oxygen was exhausted by α-T due to its ability to scavenge free radicals. In contrast, control UHMWPE continued to oxidize because the residual free radicals likely continued to form hydroperoxides and additional free radicals, furthering the oxidation reactions. There was a shift in the free radical signature of both αTPE and control from the sextet alkyl/allyl radicals to a sharp singlet during aging. Most likely, trapped free radicals move along the crystal stems until they react with another free radical or until they reach the crystal

  11. Comparison of the applicability of commercial computer programs to study the thermodynamic stability of metal oxides

    International Nuclear Information System (INIS)

    Koukkari, P.; Olin, M.; Laitinen, T.; Sippola, H.

    1999-04-01

    The oxide films formed on primary circuit surfaces incorporate radioactive species from the coolant and influence different corrosion phenomena in nuclear power plants. One approach to improve the understanding on the formation and properties of these oxide films is to evaluate their thermodynamic stability. The aim of this work was to compare and demonstrate the applicability of different commercial thermodynamic computer programs to model the deposition of oxides containing iron, chromium and/or nickel in various nuclear power plant environments. The programs considered in this evaluation comprised the EQ3/6 program and a product group including such products as ChemSage, HSC (including SOLGASMIX and GIBBS), H+PLUS and ChemSheet. In the group the transfer of data between different products is relatively easy. The goal was to find out which programs can be applied to evaluate the stability of oxide films, but not to assess the absolute accuracy of the calculations. The evaluation was done by means of applying the programs to calculate the stability of pure and mixed oxides of iron, nickel and chromium on stainless steel both in WWER and BWR conditions at different temperatures and coolant compositions. The comparison showed that EQ3/6 is suitable for most thermodynamic calculations. EQ3/6 can be characterised as a professional tool, for which no commercial training is available. ChemSage is a versatile and reliable program, which can be well used together with HSC and H+PLUS. ChemSage is mainly a professional tool, while HSC is easier to operate by an occasional user. Commercial training and support is available for both ChemSage and HSC. ChemSheet has been designed to utilise the properties of ChemSage in a user-friendly spreadsheet environment. All the products tested calculate thermodynamic equilibrium. Thus they are suitable to characterise such conditions in which the formation of a certain phase is or becomes possible. On the other hand, the modelling of the

  12. Transmucosal penetration of bismuth particles in the human stomach.

    Science.gov (United States)

    Nwokolo, C U; Lewin, J F; Hudson, M; Pounder, R E

    1992-01-01

    Electron microscopic examination of upper gastrointestinal biopsies with x-ray microanalysis was used to detect electron-dense particles of bismuth in the mucosa of the upper gastrointestinal tract, 30-60 minutes after oral dosing with either tripotassium dicitrato bismuthate [De-Noltab; Brocades (Great Britain) Ltd., Weybridge, UK; five patients] or bismuth salicylate (Pepto-Bismol; Richardson Vicks Ltd., Egham, UK; five patients), or without dosing (two patients). Transmucosal penetration of bismuth particles was observed in the gastric antral mucosa of all patients who had been dosed with tripotassium dicitrato bismuthate, but there was no penetration after oral dosing with bismuth salicylate. Persorption of bismuth particles through the gastric mucosa to the vascular endothelium provides an explanation for the rapid rise of plasma bismuth concentration observed only after oral dosing with tripotassium dicitrato bismuthate.

  13. Compatibility tests on steels in molten lead and lead-bismuth

    International Nuclear Information System (INIS)

    Fazio, C.; Benamati, G.; Martini, C.; Palombarini, G.

    2001-01-01

    The compatibility of steels with liquid lead and liquid lead-bismuth is a critical issue for the development of accelerator-driven system (ADS). In this work the results of a set of preliminary tests carried out in stagnant molten lead at 737 K and in lead-bismuth at 573, 673 and 749 K are summarised. The tests were conducted for 700, 1200, 1500 and 5000 h. Three steels were tested: two martensitic steels (mod. F82H and MANET II) and one austenitic steel (AISI 316L). The martensitic steels underwent oxidation phenomena at the higher testing temperature, due to oxygen dissolved in the melts. At a lower test temperature (573 K) and higher exposure time (5000 h) the oxidation rate of the martensitic steel seems to be lower and the developed oxide layer protective against liquid metal corrosion. The austenitic steel, in turn, exhibited an acceptable resistance to corrosion-oxidation under the test conditions

  14. The impacts of copper, iron and manganese metal ions on the EPR assessment of beer oxidative stability.

    OpenAIRE

    Jenkins, David; James, Sue; Dehrmann, Frieda; Smart, Katherine; Cook, David

    2018-01-01

    Beer flavour stability is a key quality parameter as brewers seek to maintain the quality of their product throughout the supply chain. The electron paramagnetic resonance (EPR) oxidative stability assay is one method that brewers are utilising to optimise their process with regards to flavour stability without the time requirements of stored aging and sensory testing of beer. There are still gaps in knowledge relating to the EPR measurement and the factors within the assay that affect the me...

  15. Thermal Treatment of Iron Oxide Stabilized APC Residues from Waste Incineration and the Effect on Heavy Metal Binding

    DEFF Research Database (Denmark)

    Sørensen, Mette Abildgaard; Stackpoole, M.; Bender-Koch, C.

    2000-01-01

    Iron oxide stabilized APC residues from MSWI were heat treated at 600°C and 900°C. The thermal treatments resulted in a change in product stability by forcing a transformation in the mineralogical structures of the products. The treatments, moreover, simulated somewhat the natural aging processes...... that would take place in a stabilized residue. Consequent changes in crystalline structure and heavy metal binding were examined....

  16. Bismuth-based electrochemical stripping analysis

    Science.gov (United States)

    Wang, Joseph

    2004-01-27

    Method and apparatus for trace metal detection and analysis using bismuth-coated electrodes and electrochemical stripping analysis. Both anodic stripping voltammetry and adsorptive stripping analysis may be employed.

  17. Electrical resistivity of fast neutron irradiated bismuth

    International Nuclear Information System (INIS)

    Quelard, G.

    1975-01-01

    The production and recovery of fast neutron radiation damage in bismuth, at 20K has been studied by means of electrical resistivity. Results are independent of crystallographic orientation and indicate a creation of carriers during irradiation [fr

  18. Dietary supplementation of garlic and rosemary: effects on colour stability and lipid oxidation in lamb meat

    Directory of Open Access Journals (Sweden)

    M. Scafizzari

    2010-01-01

    Full Text Available The colour of fresh meat is an important criterion consumers take into consideration when purchasing meat. Meat colour depends on the occurrence of chemical and microbial deterioration processes. The role of vitamin E and other antioxidants on ruminant meat colour stability and prevention of lipid oxidation has been widely investigated (Macit et al., 2003; Realini et al., 2004. Many natural herbs and plant extracts exert antioxidant effects such as garlic (Yin and Cheng, 2003 and rosemary (Sánchez-Escalante et al., 2001. Their use as additives for animal feeding may be a valid alternative to synthetic antioxidants since they show beneficial effects also on animal welfare and other physiological functions (Tedesco, 2001. The aim of this study was to evaluate whether garlic and rosemary dietary supplementation as compared with vitamin E affects lamb meat colour and lipid stability during storage.

  19. Physicochemical Properties and Oxidative Storage Stability of Milled Roselle (Hibiscus sabdariffa L. Seeds

    Directory of Open Access Journals (Sweden)

    Nurul Hanisah Juhari

    2018-02-01

    Full Text Available Milled Roselle (Hibiscus sabdariffa L. seeds of the UMKL cultivar were analyzed for proximate composition, water and oil absorption capacity, and the influence of storage conditions on storage stability. The storage stability was determined under four types of conditions: light/oxygen (air (LO, light/nitrogen (LN, darkness/oxygen (air (DO, and darkness/nitrogen (DN while monitoring for seven consecutive months. During the storage period, the formation of volatiles was determined using dynamic headspace sampling and Gas Chromatography-Mass Spectrometry (GC-MS analysis. In total, 85 volatiles were identified, mainly aldehydes, alcohols, ketones, furans, and acids indicating lipid oxidation. It is recommended that milled Roselle seeds should be flushed with nitrogen and stored in darkness. Under these conditions, the seeds can be stored for at least three months without changes in volatile profile. This is important to ensure the good quality of milled Roselle seeds for further commercialization.

  20. Physicochemical Properties and Oxidative Storage Stability of Milled Roselle (Hibiscus sabdariffa L.) Seeds.

    Science.gov (United States)

    Juhari, Nurul Hanisah; Petersen, Mikael Agerlin

    2018-02-11

    Milled Roselle ( Hibiscus sabdariffa L.) seeds of the UMKL cultivar were analyzed for proximate composition, water and oil absorption capacity, and the influence of storage conditions on storage stability. The storage stability was determined under four types of conditions: light/oxygen (air) (LO), light/nitrogen (LN), darkness/oxygen (air) (DO), and darkness/nitrogen (DN) while monitoring for seven consecutive months. During the storage period, the formation of volatiles was determined using dynamic headspace sampling and Gas Chromatography-Mass Spectrometry (GC-MS) analysis. In total, 85 volatiles were identified, mainly aldehydes, alcohols, ketones, furans, and acids indicating lipid oxidation. It is recommended that milled Roselle seeds should be flushed with nitrogen and stored in darkness. Under these conditions, the seeds can be stored for at least three months without changes in volatile profile. This is important to ensure the good quality of milled Roselle seeds for further commercialization.

  1. Thermogravimetric studies of the thermo- oxidative stability of irradiated and unirradiated polyethylene—II. combined antioxidants

    Science.gov (United States)

    Novaković, Lj.; Gal, O.; Marković, V.; Stannett, V. T.

    In part one of this series the effects of a phenolic, an amine and a thioester antioxidant on the thermo-oxidative stability of irradiated and unirradiated low-density polyethylene was reported. In this paper the effects of combined phenolic and thioester stabilizers are described. Isothermal thermogravimetric analysis was used to study the systems. Pronounced synergism was observed with the induction periods, the time when the initial weight loss begins and the 5% weight loss. At about 50% of each stabilizer increases greater than twofold were observed both with the unirradiated and irradiated polymers. The rate constants for oxygen uptake were decreased. However, the rates of degradation at 5% weight loss fell between the values of the two pure stabilizers with no pronounced synergism in either case. In the absence of oxygen little effect of either antioxidant or their mixtures was observed. The corresponding activation energies were somewhat higher, however, with the irradiated samples containing antioxidants. Dynamic thermogravimetry was used for this study. A kinetic analysis indicated that there were somewhat different modes of degradation at lower- and higher- temperature ranges.

  2. Thermal stability of pulsed laser deposited iridium oxide thin films at low oxygen atmosphere

    Science.gov (United States)

    Gong, Yansheng; Wang, Chuanbin; Shen, Qiang; Zhang, Lianmeng

    2013-11-01

    Iridium oxide (IrO2) thin films have been regarded as a leading candidate for bottom electrode and diffusion barrier of ferroelectric capacitors, some process related issues need to be considered before integrating ferroelectric capacitors into memory cells. This paper presents the thermal stability of pulsed laser deposited IrO2 thin films at low oxygen atmosphere. Emphasis was given on the effect of post-deposition annealing temperature at different oxygen pressure (PO2) on the crystal structure, surface morphology, electrical resistivity, carrier concentration and mobility of IrO2 thin films. The results showed that the thermal stability of IrO2 thin films was strongly dependent on the oxygen pressure and annealing temperature. IrO2 thin films can stably exist below 923 K at PO2 = 1 Pa, which had a higher stability than the previous reported results. The surface morphology of IrO2 thin films depended on PO2 and annealing temperature, showing a flat and uniform surface for the annealed films. Electrical properties were found to be sensitive to both the annealing temperature and oxygen pressure. The room-temperature resistivity of IrO2 thin films with a value of 49-58 μΩ cm increased with annealing temperature at PO2 = 1 Pa. The thermal stability of IrO2 thin films as a function of oxygen pressure and annealing temperature was almost consistent with thermodynamic calculation.

  3. Characteristics and oxidative stability of bread fortified with encapsulated shrimp oil

    Directory of Open Access Journals (Sweden)

    Sirima Takeungwongtrakul

    2015-12-01

    Full Text Available Characteristics and oxidative stability of bread fortified with micro-encapsulated shrimp oil (MSO were determined. The addition of MSO could improve the loaf volume of bread. Chewiness,gumminess and resilience of resulting bread were decreased. Bread crust and crumb showed higher redness and yellowness when MSO was incorporated (P<0.05. Microstructure study revealed that MSO remained intact with bread crumbs. The addition of MSO up to 3% had no adverse effect on bread quality and sensory acceptability. Oxidation took place in bread fortified with 5%MSO to a higher extent, compared with those with 1 or 3% MSO. Therefore, the bread could be fortified with MSO up to 3%.

  4. Polyaniline-stabilized electromagnetic wave absorption composites of reduced graphene oxide on magnetic carbon nanotube film.

    Science.gov (United States)

    Li, Jinsong; Duan, Yan; Lu, Weibang; Chou, Tsu-Wei

    2018-04-02

    A multi-layered composite with exceptionally high electromagnetic wave-absorbing capacity and performance stability was fabricated via the facile electrophoresis of a reduced graphene oxide network on carbon nanotube (CNT)-Fe 3 O 4 -polyaniline (PANI) film. Minimum reflection loss (RL) of -53.2 dB and absorbing bandwidth of 5.87 GHz (< -10 dB) are achieved, surpassing most recently reported CNT- and graphene-based absorbers. In particular, comparing to the original composites, the minimum RL and bandwidth (< -10 dB) maintains 82.5% and 99.7%, respectively, after 20 h charge/discharge cycling, demonstrating high environmental suitability.

  5. Polyaniline-stabilized electromagnetic wave absorption composites of reduced graphene oxide on magnetic carbon nanotube film

    Science.gov (United States)

    Li, Jinsong; Duan, Yan; Lu, Weibang; Chou, Tsu-Wei

    2018-04-01

    A multi-layered composite with exceptionally high electromagnetic wave-absorbing capacity and performance stability was fabricated via the facile electrophoresis of a reduced graphene oxide network on carbon nanotube (CNT)-Fe3O4-polyaniline (PANI) film. Minimum reflection loss (RL) of -53.2 dB and absorbing bandwidth of 5.87 GHz (< -10 dB) are achieved, surpassing most recently reported CNT- and graphene-based absorbers. In particular, comparing to the original composites, the minimum RL and bandwidth (< -10 dB) maintains 82.5% and 99.7%, respectively, after 20 h charge/discharge cycling, demonstrating high environmental suitability.

  6. Dispersion of Pt Nanoparticle-Doped Reduced Graphene Oxide Using Aniline as a Stabilizer

    Directory of Open Access Journals (Sweden)

    Hyoung-Joon Jin

    2012-12-01

    Full Text Available In this study, a simple one-step method was developed to load small-sized Pt nanoparticles (3.1 ± 0.3 nm in large quantities (50 wt % on aniline-functionalized and reduced graphene oxide (r-fGO. In the process, an ethylene glycol solution and aniline-functionalized moiety play the roles of reducing agent and stabilizer for the Pt nanoparticles, respectively, without damaging the graphite structures of the r-fGO. The Pt nanoparticles loading on the surface of r-fGO with uniform dispersion have a great effect on the electrical conductivity.

  7. Characterization of Oxidative Stability of Fish Oil- and Plant Oil-Enriched Skimmed Milk

    DEFF Research Database (Denmark)

    Saga, Linda C.; Kristinova, Vera; Kirkhus, Bente

    2013-01-01

    oil was added to fish oil in only 5 and 10 %, whereas no protective effect of camelina oil was observed when evaluated by these methods. Moreover, fish oil blended with oat oil conferred the lowest PV and lower amounts of volatile compounds during the storage period of 14 days at 4 °C. Surprisingly......The objective of this research was to determine the oxidative stability of fish oil blended with crude plant oils rich in naturally occurring antioxidants, camelina oil and oat oil, respectively, in bulk and after supplementation of 1 wt% of oil blends to skimmed milk emulsions. Ability of crude...

  8. Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system.

    Science.gov (United States)

    Hădărugă, Daniel I; Hădărugă, Nicoleta G; Costescu, Corina I; David, Ioan; Gruia, Alexandra T

    2014-01-01

    Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD) complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed-uncomplexed volatile compounds in an ethanol/water solution at 50 °C. Both the raw essential oil and its β-CD complex have been subjected to thermal and oxidative degradation conditions in order to evaluate the protective capacity of β-CD. The relative concentration of the O. basilicum L. essential oil compounds, as determined by GC-MS, varies accordingly with their sensitivity to the thermal and/or oxidative degradation conditions imposed. Furthermore, the relative concentration of the volatile O. basilicum L. compounds found in the β-CD complex is quite different in comparison with the raw material. An increase of the relative concentration of linalool oxide from 0.3% to 1.1%, in addition to many sesquiterpene oxides, has been observed. β-CD complexation of the O. basilicum essential oil modifies the relative concentration of the encapsulated volatile compounds. Thus, linalool was better encapsulated in β-CD, while methylchavicol (estragole) was encapsulated in β-CD at a concentration close to that of the raw essential oil. Higher relative concentrations from the degradation of the oxygenated compounds such as linalool oxide and aromadendren oxide were determined in the raw O. basilicum L. essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated.

  9. Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system

    Directory of Open Access Journals (Sweden)

    Daniel I. Hădărugă

    2014-11-01

    Full Text Available Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed–uncomplexed volatile compounds in an ethanol/water solution at 50 °C. Both the raw essential oil and its β-CD complex have been subjected to thermal and oxidative degradation conditions in order to evaluate the protective capacity of β-CD. The relative concentration of the O. basilicum L. essential oil compounds, as determined by GC–MS, varies accordingly with their sensitivity to the thermal and/or oxidative degradation conditions imposed. Furthermore, the relative concentration of the volatile O. basilicum L. compounds found in the β-CD complex is quite different in comparison with the raw material. An increase of the relative concentration of linalool oxide from 0.3% to 1.1%, in addition to many sesquiterpene oxides, has been observed. β-CD complexation of the O. basilicum essential oil modifies the relative concentration of the encapsulated volatile compounds. Thus, linalool was better encapsulated in β-CD, while methylchavicol (estragole was encapsulated in β-CD at a concentration close to that of the raw essential oil. Higher relative concentrations from the degradation of the oxygenated compounds such as linalool oxide and aromadendren oxide were determined in the raw O. basilicum L. essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated.

  10. Thermal and oxidative stability of the Ocimum basilicum L. essential oil/β-cyclodextrin supramolecular system

    Science.gov (United States)

    Hădărugă, Nicoleta G; Costescu, Corina I; David, Ioan; Gruia, Alexandra T

    2014-01-01

    Summary Ocimum basilicum L. essential oil and its β-cyclodextrin (β-CD) complex have been investigated with respect to their stability against the degradative action of air/oxygen and temperature. This supramolecular system was obtained by a crystallization method in order to achieve the equilibrium of complexed–uncomplexed volatile compounds in an ethanol/water solution at 50 °C. Both the raw essential oil and its β-CD complex have been subjected to thermal and oxidative degradation conditions in order to evaluate the protective capacity of β-CD. The relative concentration of the O. basilicum L. essential oil compounds, as determined by GC–MS, varies accordingly with their sensitivity to the thermal and/or oxidative degradation conditions imposed. Furthermore, the relative concentration of the volatile O. basilicum L. compounds found in the β-CD complex is quite different in comparison with the raw material. An increase of the relative concentration of linalool oxide from 0.3% to 1.1%, in addition to many sesquiterpene oxides, has been observed. β-CD complexation of the O. basilicum essential oil modifies the relative concentration of the encapsulated volatile compounds. Thus, linalool was better encapsulated in β-CD, while methylchavicol (estragole) was encapsulated in β-CD at a concentration close to that of the raw essential oil. Higher relative concentrations from the degradation of the oxygenated compounds such as linalool oxide and aromadendren oxide were determined in the raw O. basilicum L. essential oil in comparison with the corresponding β-CD complex. For the first time, the protective capability of natural β-CD for labile basil essential oil compounds has been demonstrated. PMID:25550747

  11. Retaining Oxidative Stability of Emulsified Foods by Novel Nonmigratory Polyphenol Coated Active Packaging.

    Science.gov (United States)

    Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2016-07-13

    Oxidation causes lipid rancidity, discoloration, and nutrient degradation that decrease shelf life of packaged foods. Synthetic additives are effective oxidation inhibitors, but are undesirable to consumers who prefer "clean" label products. The aim of this study was to improve oxidative stability of emulsified foods by a novel nonmigratory polyphenol coated active packaging. Polyphenol coatings were applied to chitosan functionalized polypropylene (PP) by laccase assisted polymerization of catechol and catechin. Polyphenol coated PP exhibited both metal chelating (39.3 ± 2.5 nmol Fe(3+) cm(-2), pH 4.0) and radical scavenging (up to 52.9 ± 1.8 nmol Trolox eq cm(-2)) capacity, resulting in dual antioxidant functionality to inhibit lipid oxidation and lycopene degradation in emulsions. Nonmigratory polyphenol coated PP inhibited ferric iron promoted degradation better than soluble chelators, potentially by partitioning iron from the emulsion droplet interface. This work demonstrates that polyphenol coatings can be designed for advanced material chemistry solutions in active food packaging.

  12. Effect of Leaves of Caesalpinia decapetala on Oxidative Stability of Oil-in-Water Emulsions

    Directory of Open Access Journals (Sweden)

    María Gabriela Gallego

    2017-03-01

    Full Text Available Caesalpinia decapetala (Roth Alston (Fabaceae (CD is used in folk medicine to prevent colds and treat bronchitis. This plant has antitumor and antioxidant activity. The antioxidant effects of an extract from Caesalpinia decapetala (Fabaceae were assessed by storage of model food oil-in-water emulsions with analysis of primary and secondary oxidation products. The antioxidant capacity of the plant extract was evaluated by the diphenylpicrylhydrazyl (DPPH, Trolox equivalent antioxidant capacity (TEAC, oxygen radical absorbance capacity (ORAC and ferric reducing antioxidant power (FRAP assays and by electron paramagnetic resonance (EPR spectroscopy. Lyophilized extracts of CD were added at concentrations of 0.002%, 0.02% and 0.2% into oil-in-water emulsions, which were stored for 30 days at 33 ± 1 °C, and then, oxidative stability was evaluated. The CD extract had high antioxidant activity (700 ± 70 µmol Trolox/g dry plant for the ORAC assay, mainly due to its phenolic components: gallic acid, quercetin, catechin, 4-hydroxybenzoic acid and p-coumaric acid. At a concentration of 0.2%, the extract significantly reduced the oxidative deterioration of oil-in-water emulsions. The results of the present study show the possibility of utilizing CD as a promising source of natural antioxidants for retarding lipid oxidation in the food and cosmetic industries.

  13. Stability of silver nanoparticles: agglomeration and oxidation in biological relevant conditions

    Energy Technology Data Exchange (ETDEWEB)

    Valenti, Laura E.; Giacomelli, Carla E., E-mail: giacomel@fcq.unc.edu.ar [Universidad Nacional de Córdoba, Ciudad Universitaria, Instituto de Investigaciones en Físico Química de Córdoba (INFIQC) CONICET-UNC, Departamento de Fisicoquímica, Facultad de Ciencias Químicas (Argentina)

    2017-05-15

    Silver nanoparticles (Ag-NP) are the most used nanomaterial in consumer products due to the intrinsic antimicrobial capacity of silver. However, Ag-NP may be also harmful to algae, aquatic species, mammalian cells, and higher plants because both Ag{sup +} and nanoparticles are responsible of cell damages. The oxidative dissolution of Ag-NP would proceed to completion under oxic conditions, but the rate and extent of the dissolution depend on several factors. This work correlates the effect of the capping agent (albumin and citrate) with the stability of Ag-NP towards agglomeration in simulated body fluid (SBF) and oxidation in the presence of ROS species (H{sub 2}O{sub 2}). Capping provides colloidal stability only through electrostatic means, whereas albumin acts as bulky ligands giving steric and electrostatic repulsion, inhibiting the agglomeration in SBF. However, citrate capping protects Ag-NP from dissolution to a major extent than albumin does because of its reducing power. Moreover, citrate in solution minimizes the oxidation of albumin-coated Ag-NP even after long incubation times. H{sub 2}O{sub 2}-induced dissolution proceeds to completion with Ag-NP incubated in SBF, while incubation in citrate leads to an incomplete oxidation. In short, albumin is an excellent capping agent to minimize Ag-NP agglomeration whereas citrate provides a mild-reductive medium that prevents dissolution in biological relevant media as well as in the presence of ROS species. These results provide insight into how the surface properties and media composition affect the release of Ag{sup +} from Ag-NP, related to the cell toxicity and relevant to the storage and lifetime of silver-containing nanomaterials.

  14. Stability of silver nanoparticles: agglomeration and oxidation in biological relevant conditions

    Science.gov (United States)

    Valenti, Laura E.; Giacomelli, Carla E.

    2017-05-01

    Silver nanoparticles (Ag-NP) are the most used nanomaterial in consumer products due to the intrinsic antimicrobial capacity of silver. However, Ag-NP may be also harmful to algae, aquatic species, mammalian cells, and higher plants because both Ag+ and nanoparticles are responsible of cell damages. The oxidative dissolution of Ag-NP would proceed to completion under oxic conditions, but the rate and extent of the dissolution depend on several factors. This work correlates the effect of the capping agent (albumin and citrate) with the stability of Ag-NP towards agglomeration in simulated body fluid (SBF) and oxidation in the presence of ROS species (H2O2). Capping provides colloidal stability only through electrostatic means, whereas albumin acts as bulky ligands giving steric and electrostatic repulsion, inhibiting the agglomeration in SBF. However, citrate capping protects Ag-NP from dissolution to a major extent than albumin does because of its reducing power. Moreover, citrate in solution minimizes the oxidation of albumin-coated Ag-NP even after long incubation times. H2O2-induced dissolution proceeds to completion with Ag-NP incubated in SBF, while incubation in citrate leads to an incomplete oxidation. In short, albumin is an excellent capping agent to minimize Ag-NP agglomeration whereas citrate provides a mild-reductive medium that prevents dissolution in biological relevant media as well as in the presence of ROS species. These results provide insight into how the surface properties and media composition affect the release of Ag+ from Ag-NP, related to the cell toxicity and relevant to the storage and lifetime of silver-containing nanomaterials.

  15. Crystallization of bismuth borate glasses

    International Nuclear Information System (INIS)

    Bajaj, Anu; Khanna, Atul

    2009-01-01

    Bismuth borate glasses with Bi 2 O 3 concentration of 20-66 mol% were prepared by melt quenching and devitrified by heat treatment above their glass transition temperatures. All glasses show a strong tendency towards crystallization on annealing that increases with Bi 2 O 3 concentration. The crystalline phases formed on devitrification were characterized by FTIR absorption spectroscopy and DSC measurements. Our studies reveal that phases produced in glasses are strongly determined by initial glass composition and the two most stable crystalline phases are: Bi 3 B 5 O 12 and Bi 4 B 2 O 9 . The metastable BiBO 3 phase can also be formed by devitrification of glass with 50 mol% of Bi 2 O 3 . This phase is, however, unstable and decomposes into Bi 3 B 5 O 12 and Bi 4 B 2 O 9 on prolonged heat treatment.

  16. New filtration systems for extra-virgin olive oil: effect on antioxidant compounds, oxidative stability, and physicochemical and sensory properties.

    Science.gov (United States)

    Lozano-Sánchez, Jesús; Cerretani, Lorenzo; Bendini, Alessandra; Gallina-Toschi, Tullia; Segura-Carretero, Antonio; Fernández-Gutiérrez, Alberto

    2012-04-11

    The purpose of this work was to evaluate some new filtration systems in relation to the quality of extra-virgin olive oil (EVOO). Filtration processes were undertaken using a polypropylene filter bag and two different inert gas flows as filter aids (argon and nitrogen). Qualitative and quantitative variations of the glyceride composition, antioxidant and pro-oxidant compounds, and water content were correlated with the oxidative stability to establish the effect on EVOO shelf life. The influence on physicochemical and sensorial properties was also evaluated. After filtration, the oxidative stability was reduced. The behavior of the polyphenols and water content on the filtration process could explain the lowest oxidative stability of filtered EVOO. Moreover, the results of the sensorial analysis confirmed that filtration using inert gases did not decrease the intensity of the main positive sensory attributes. The results could help olive-oil producers to improve EVOO quality and establish optimal storage conditions.

  17. Bismuth Silver Oxysulfide for Photoconversion Applications: Structural and Optoelectronic Properties

    KAUST Repository

    Baqais, Amal Ali Abdulallh

    2017-09-18

    Single-phase bismuth silver oxysulfide, BiAgOS, was prepared by a hydrothermal method. Its structural, morphological and optoelectronic properties were investigated and compared with bismuth copper oxysulfide (BiCuOS). Rietveld refinement of the powder X-ray diffraction (XRD) measurements revealed that the BiAgOS and BiCuOS crystals have the same structure as ZrSiCuAs: the tetragonal space group P4/nmm. X-ray photoelectron spectroscopy (XPS) analyses confirmed that the BiAgOS has a high purity, in contrast with BiCuOS, which tends to have Cu vacancies. The Ag has a monovalent oxidation state, whereas Cu is present in the oxidation states of +1 and +2 in the BiCuOS system. Combined with experimental measurements, density functional theory calculations employing the range-separated hybrid HSE06 exchange-correlation functional with spin-orbit coupling quantitatively elucidated photophysical properties such as ab-sorption coefficients, effective masses and dielectric constants. BiCuOS and BiAgOS were found to have indirect bandgaps of 1.1 and 1.5 eV, respectively. Both possess high dielectric constants and low electron and hole effective masses. Therefore, these materials are expected to have high exciton dissociation capabilities and excellent carrier diffusion properties. This study reveals that BiAgOS is a promising candidate for photoconversion applications.

  18. Gravimetric Analysis of Bismuth in Bismuth Subsalicylate Tablets: A Versatile Quantitative Experiment for Undergraduate Laboratories

    Science.gov (United States)

    Davis, Eric; Cheung, Ken; Pauls, Steve; Dick, Jonathan; Roth, Elijah; Zalewski, Nicole; Veldhuizen, Christopher; Coeler, Joel

    2015-01-01

    In this laboratory experiment, lower- and upper-division students dissolved bismuth subsalicylate tablets in acid and precipitated the resultant Bi[superscript 3+] in solution with sodium phosphate for a gravimetric determination of bismuth subsalicylate in the tablets. With a labeled concentration of 262 mg/tablet, the combined data from three…

  19. Bio-assisted synthesis and characterization of nanostructured bismuth (III) sulphide using Clostridium acetobutylicum

    International Nuclear Information System (INIS)

    Kamaraj, Sathish Kumar; Venkatachalam, Ganesh; Arumugam, Palaniappan; Berchmans, Sheela

    2014-01-01

    Nanostructured bismuth (III) sulphide is synthesized at room temperature using a hydrogen sulphide producing microorganism namely Clostridium acetobutylicum. On contrary to chemical routes involving both the high and room temperature methods, the present experimental procedure involves a bio-assisted approach. This method is free from the usage of toxic and hazardous chemicals making it an environment friendly route. The synthesized bismuth sulphide is characterized using transmission electron microscope (TEM), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). From our experiments we find that bismuth sulphide produced using this bio-assisted approach exhibits a hexagonal shaped plate-like structures and is stabilized by the extracellular proteins present in the culture medium. - Graphical abstract: A green chemistry approach towards the synthesis of bismuth (III) sulphide nanostructures at room temperature using a hydrogen sulphide producing microorganism namely, Clostridium acetobutylicum is demonstrated. - Highlights: • Environmentally benign (greener) route towards synthesis of Bi 2 S 3 nanostructures. • Bio-assisted synthesis of Bi 2 S 3 at room temperature using Clostridium acetobutylicum. • Extracellular proteins in H 2 S producing microorganism as stabilizer for Bi 2 S 3 NPs. • Hexagonal platelets of Bi 2 S 3 possessing an orthorhombic crystalline structure

  20. Investigations of suspension stability of iron oxide nanoparticles using time-resolved UV–visible spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Vikram, S.; Vasanthakumari, R. [B. S. Abdur Rahman University, Polymer Nanotechnology Centre (India); Tsuzuki, Takuya [Australian National University, Research School of Engineering, College of Engineering and Computer Science (Australia); Rangarajan, Murali, E-mail: r-murali@cb.amrita.edu [Amrita University, Center of Excellence in Advanced Materials and Green Technologies, Amrita School of Engineering Coimbatore (India)

    2016-09-15

    This study examines the suspension stability of iron oxide nanoparticles of different sizes, magnetic susceptibility, and saturation magnetization over long time scales in dilute systems using time-resolved UV–visible spectroscopy. The effects of citric acid as a chelating agent and applied external magnetic field are also studied. UV–visible spectra are obtained at different times for citric-acid-stabilized nanoparticles dispersed in water, and the peak absorbance is tracked with time, in the presence and absence of external magnetic fields. It is seen that the nanoparticles sediment slowly even in the absence of chain formation, with the phenomenon occurring in two-to-three regimes for the systems studied. Sedimentation exhibits either exponential or power-law behavior of maximum absorbance with time. In the dilute dispersions studied, thermal dispersion is about two orders of magnitude stronger than van der Waals interactions, and chain formation is not easy. Yet, it is likely that local anisotropic structures of the nanoparticles form, through which the attractive interactions result in sedimentation. Citric acid gradually stabilizes the aggregating particles; after an initial faster sedimentation, electrostatic repulsion causes the particles to segregate, as observed by a linear increase in the concentration of the nanoparticles at long times. In the presence of magnetic field, stabilization effects are significantly reduced. It is seen that though the attractive force between the nanoparticles and the external field is smaller than Brownian forces, together with van der Waals interactions, these attractive forces likely act as directing agents facilitating sedimentation. This study demonstrates that aggregation-induced sedimentation of magnetic nanoparticles is likely to play a significant role in magnetic drug targeting even when the particles are stabilized with chelating agents.Graphical abstract.

  1. Investigations of suspension stability of iron oxide nanoparticles using time-resolved UV–visible spectroscopy

    International Nuclear Information System (INIS)

    Vikram, S.; Vasanthakumari, R.; Tsuzuki, Takuya; Rangarajan, Murali

    2016-01-01

    This study examines the suspension stability of iron oxide nanoparticles of different sizes, magnetic susceptibility, and saturation magnetization over long time scales in dilute systems using time-resolved UV–visible spectroscopy. The effects of citric acid as a chelating agent and applied external magnetic field are also studied. UV–visible spectra are obtained at different times for citric-acid-stabilized nanoparticles dispersed in water, and the peak absorbance is tracked with time, in the presence and absence of external magnetic fields. It is seen that the nanoparticles sediment slowly even in the absence of chain formation, with the phenomenon occurring in two-to-three regimes for the systems studied. Sedimentation exhibits either exponential or power-law behavior of maximum absorbance with time. In the dilute dispersions studied, thermal dispersion is about two orders of magnitude stronger than van der Waals interactions, and chain formation is not easy. Yet, it is likely that local anisotropic structures of the nanoparticles form, through which the attractive interactions result in sedimentation. Citric acid gradually stabilizes the aggregating particles; after an initial faster sedimentation, electrostatic repulsion causes the particles to segregate, as observed by a linear increase in the concentration of the nanoparticles at long times. In the presence of magnetic field, stabilization effects are significantly reduced. It is seen that though the attractive force between the nanoparticles and the external field is smaller than Brownian forces, together with van der Waals interactions, these attractive forces likely act as directing agents facilitating sedimentation. This study demonstrates that aggregation-induced sedimentation of magnetic nanoparticles is likely to play a significant role in magnetic drug targeting even when the particles are stabilized with chelating agents.Graphical abstract

  2. A comparison of the efficacy of various antioxidants on the oxidative stability of irradiated polyethylene.

    Science.gov (United States)

    Hope, Natalie; Bellare, Anuj

    2015-03-01

    Ultrahigh-molecular-weight polyethylene (UHMWPE) is subjected to radiation crosslinking to form highly crosslinked polyethylene (HXLPE), which has improved wear resistance. First-generation HXLPE was subjected to thermal treatment to reduce or quench free radicals that can induce long-term oxidative degeneration. Most recently, antioxidants have been added to HXLPE to induce oxidative resistance rather than by thermal treatment. However, antioxidants can interfere with the efficiency of radiation crosslinking. We sought to identify (1) which antioxidant from among those tested (vitamin E, β-carotene, butylated hydroxytoluene, or pentaerythritol tetrakis [methylene-3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate]) causes the least reduction of crosslinking; (2) which promotes the greatest oxidative stability; and (3) which had the lowest ratio of oxidation index to crosslink density. Medical-grade polyethylene (PE) resin was blended with 0.1 weight % of the following stabilizers: alpha tocopherol (vitamin E), β-carotene, butylated hydroxytoluene (BHT), and pentaerythritol tetrakis [methylene-3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate] (a hindered phenol antioxidant [HPAO]). These blends were compression-molded into sheets and subjected to electron beam irradiation to a dose of 100 kGy. Equilibrium swelling experiments were conducted to calculate crosslink density. Each PE was subjected to accelerated aging for a period of 2 weeks and Fourier transform infrared spectroscopy was used to measure the maximum oxidation. Statistical analysis was conducted using analysis of variance with Fisher's protected least significant difference in which a p value of antioxidant-containing HXLPE was observed with HPAO, which had a crosslink density (n = 6) of 0.167 (effect size [ES] = 0.87; 95% confidence interval [CI], 0.162-0.173) mol/dm(3) compared with 0.139 (ES = 1.57; 95% CI, 0.132-0.146) mol/dm(3) (p = 0.020) for BHT, 0.131 (ES = 1.77; 95% CI, 0.123-0.139) mol/dm(3

  3. Chemical quality and oxidative stability of extra virgin olive oils from San Juan province (Argentina).

    Science.gov (United States)

    Ceci, Liliana N; Mattar, Susana B; Carelli, Amalia A

    2017-10-01

    This study provides information about the chemical quality (quality indices, fatty acid profile, total polyphenols (PPs), tocopherols and pigments) and oxidative stability index (OSI) of virgin olive oils of Arbequina, Changlot Real and Coratina cultivars (San Juan province, Argentina). The influence of the cultivar and the effect of earlier harvest dates on the yields (OY), quality and OSI of the oils were also evaluated. All the oils were classified as extra virgin. The OY (L/100kg) averaged: Arbequina=13.2, Changlot Real=21.3, Coratina=18.3. The oleic acid (O) percentage, oleic to linoleic plus linolenic ratio [O/(L+Ln)], PPs and OSI were highly dependent on cultivar (Arbequinaoxidative stability and a fatty acid profile according to the IOC trade standard. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Oxidative stability of biodiesels produced from vegetable oils having different degrees of unsaturation

    International Nuclear Information System (INIS)

    Pantoja, Samantha Siqueira; Conceição, Leyvison Rafael V. da; Costa, Carlos E.F. da; Zamian, José R.; Rocha Filho, Geraldo N. da

    2013-01-01

    Highlights: • We obtained biodiesel from açai, cupuaçu, passion fruit and linseed oil. • Determined the properties of biodiesel, such as kinematic viscosity, cold filter plugging point and oxidative stability. • Evaluated the influence of antioxidants on biodiesel. • The PG antioxidant was more efficient than BHA and TBHQ for the açaí biodiesel. - Abstract: In the present paper, methyl esters were obtained from the transesterification of cupuaçu fat lipids (Theobroma grandiflorum) (Willd. ex Spreng.) (K. Schum.), açaí (Euterpe oleracea), passion fruit (Passiflora edulis) and linseed (Linum usitatissimum L.) oils, using a basic catalyst. The triglycerides were characterized by their fatty acid composition, and the biodiesels were characterized according to standard methods. The critical properties, such as the cold filter plugging point, kinematic viscosity and oxidative stability, of the biodiesels were studied. The influence of butyl-hydroxyanisole (BHA), propyl gallate (PG) and tert-butyl hydroquinone (TBHQ) antioxidants on the açaí, passion fruit and linseed biodiesels was evaluated at concentrations from 500 to 4000 ppm. PG was found to be the most efficient antioxidant for the studied biodiesels

  5. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers

    Science.gov (United States)

    You, Jingbi; Meng, Lei; Song, Tze-Bin; Guo, Tzung-Fang; Yang, Yang (Michael); Chang, Wei-Hsuan; Hong, Ziruo; Chen, Huajun; Zhou, Huanping; Chen, Qi; Liu, Yongsheng; De Marco, Nicholas; Yang, Yang

    2016-01-01

    Lead halide perovskite solar cells have recently attracted tremendous attention because of their excellent photovoltaic efficiencies. However, the poor stability of both the perovskite material and the charge transport layers has so far prevented the fabrication of devices that can withstand sustained operation under normal conditions. Here, we report a solution-processed lead halide perovskite solar cell that has p-type NiOx and n-type ZnO nanoparticles as hole and electron transport layers, respectively, and shows improved stability against water and oxygen degradation when compared with devices with organic charge transport layers. Our cells have a p-i-n structure (glass/indium tin oxide/NiOx/perovskite/ZnO/Al), in which the ZnO layer isolates the perovskite and Al layers, thus preventing degradation. After 60 days storage in air at room temperature, our all-metal-oxide devices retain about 90% of their original efficiency, unlike control devices made with organic transport layers, which undergo a complete degradation after just 5 days. The initial power conversion efficiency of our devices is 14.6 ± 1.5%, with an uncertified maximum value of 16.1%.

  6. Sensory quality, colour and oxidative stability of cured cooked ham with propolis extract

    Directory of Open Access Journals (Sweden)

    Miroslav Kročko

    2014-02-01

    Full Text Available The effect of 0.06% propolis ethanol extract on the sensory quality, colour and oxidative stability of cured cooked ham was evaluated. Half of the experimentally processed hams treated with 0.06% ethanolic extract of propolis with ascorbic acid (EEP, only with ascorbic acid (AA and control samples (C were sliced and vacuum packaged. Samples were kept at 4 °C 21 days (sliced respectively 20, 50 and 100 days (unsliced. The results revealed that all samples were characterized without any significant colour discrepancies. In general, the thiobarbituric acid value (mg malondialdehyde/kg increased gradually in all samples examined, with a significantly lower (P <0.05 level for treated samples than for controls. The significantly lowest (P <0.05 sensory parameters in comparison to unsliced hams were observed in sliced hams packaged in vacuum. Sliced hams with EEP were characterized with significantly lowest (P <0.05 intensity of characteristic aroma. Undesirable taste was detected in control sliced hams after storage period. Significantly (P <0.05 more desirable taste of sliced hams was observed in those with only ascorbic acid in comparison with EEP. In our study was demonstrated that 0.06% ethanol extract of propolis positive affected oxidation stability and not negative affected others technological (pH, colour and sensory characteristics of poultry meat product - cured cooked ham. Normal 0 21 false false false CS JA X-NONE

  7. Enhanced catalytic stability of lipase immobilized on oxidized and disulfide-rich eggshell membrane for esters hydrolysis and transesterification.

    Science.gov (United States)

    Jiang, Chenyu; Cheng, Chuanchuan; Hao, Mei; Wang, Hongbin; Wang, Ziying; Shen, Cai; Cheong, Ling-Zhi

    2017-12-01

    Eggshell membrane (ESM) is an industrial waste that is available in abundance from food industry. Present study investigated the physicochemical properties of oxidized ESM and compared the efficiency of ESM and oxidized ESM as carrier for Burkholderia cepacia lipase (BCL) used in esters hydrolysis and transesterification. Following oxidation treatment, FTIR analysis and Ellman's assay showed amino acid cysteine in ESM was oxidized to form disulfide bond-containing cystine. In addition, AFM analysis showed ESM which exhibited a highly porous filamentous structure appeared to be coalesce following oxidation treatment. Oxidized ESM also showed reduced porosity (38.67%) in comparison to native ESM (51.65%). BCL were successfully immobilized on oxidized ESM through carrier activation method (enzyme loading of 5.01mg protein/g oxidized ESM). These immobilized lipase demonstrated significantly (Ptransesterification (7.83±0.05) activity for at least 10 consecutive runs. Enhanced catalytic stability of BCL immobilized on oxidized ESM might be due to stabilization of the protein structure in oxidized ESM by disulfide bonds which helped formation of a stable bonding with BCL. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Oxidative stability of chicken meat during storage influenced by the feeding of alfalfa meal

    Directory of Open Access Journals (Sweden)

    Jana Tkáčová

    2015-05-01

    Full Text Available The aim of our experiment was to determine the effect of the alfalfa meal component in feed mixtures of Ross broiler chickens on oxidative stability of meat. Proportion of alfalfa meal in feed mixtures was 4 and 6%. The results were compared to the control group without alfalfa meal in feed mixtures. At the end of the experiment (day 38, 6 pcs of broiler chickens from each group with an average live body weight over 1 800 g were randomly selected. The samples for chemical analysis consisted of identical proportion of breast and thigh muscle, and about 1 cm2 of skin with subcutaneous fat. Fat from the meat was obtained after the samples drying. A fat was determined by extraction by means of laboratory instrument Det N Gras Selecta P. The oxidative stability of meat on the basis of acid number of fat was determided by chemical analysis. Chicken meat was stored at -18 °C for 12 months and 18 months. The acid number of fat of stored meat for 12 months was 7.38 mg KOH per g in the control group, 7.42 mg KOH per g in the group with a proportion of 4% alfalfa meal, and 11.18 mg KOH per g in the group with proportion 6% alfalfa meal. An acid number of fat of stored meat for 18 months was 5.90 mg KOH per g in the control group, 4.65 mg KOH per g in the group with a proportion of 4% alfalfa meal, and 7.07 mg KOH per g in the group with a proportion of 6% alfalfa meal. Chicken meat is notably sensitive to lipid oxidation because of its high content of polyunsaturated fatty acids. Legislation in Title 5 of Part 3 of the Codex Alimentarius of the Slovak Republic and the Government Regulation No. 286/2003 Coll. in the Annex 4 in Part B provide the requirements for animal fats and meat products. Regulation of the European Parliament and Council (EC No. 853/2004 lays down specific hygiene rules for food of animal origin. In particular, determination of free fatty acids content of rendered animal fat (tallow, lard, other animal fat. Legislative regulation does

  9. Comparison of stabilization by Vitamin E and 2,6-di-tert-butylphenols during polyethylene radio-thermal-oxidation

    Science.gov (United States)

    Richaud, Emmanuel

    2014-10-01

    This paper reports a compilation of data for PE+Vitamin E and 2,6-di-tert-butylphenols oxidation in radio-thermal ageing. Data unambiguously show that Vitamin E reacts with Prad and POOrad whereas 2,6-di-tert-butyl phenols only react with POOrad. Kinetic parameters of the stabilization reactions for both kinds of antioxidants were tentatively extracted from phenol depletion curves, and discussed regarding the structure of the stabilizer. They were also used for completing an existing kinetic model used for predicting the stabilization by antioxidants. This one permits to compare the efficiency of stabilizer with dose rate or sample thickness.

  10. Higher Americium Oxidation State Research Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Mincher, Bruce J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Law, Jack D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Goff, George S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Moyer, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burns, Jon D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lumetta, Gregg J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sinkov, Sergey I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shehee, Thomas C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hobbs, David T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-12-18

    The partitioning of hexavalent Am from dissolved nuclear fuel requires the ability to efficiently oxidize Am(III) to Am(VI) and to maintain that oxidation state for a length of time sufficient to perform the separation. Several oxidants have been, or are being developed. Chemical oxidants include Ag-catalyzed ozone, Ag-catalyzed peroxydisulfate, Cu(III) periodate, and sodium bismuthate. Hexavalent americium has also now successfully been prepared by electrolysis, using functionalized electrodes. So-called auto-reduction rates of Am(VI) are sufficiently slow to allow for separations. However, for separations based on solvent extraction or ion exchange using organic resins, the high valence state must be maintained under the reducing conditions of the organic phase contact, and a holding oxidant is probably necessary. Until now, only Cu(III) periodate and sodium bismuthate oxidation have been successfully combined with solvent extraction separations. Bismuthate oxidation provided the higher DAm, since it acts as its own holding oxidant, and a successful hot test using centrifugal contactors was performed. For the other oxidants, Ag-catalyzed peroxydisulfate will not oxidize americium in nitric acid concentrations above 0.3 M, and it is not being further investigated. Peroxydisulfate in the absence of Ag catalysis is being used to prepare Am(V) in ion exchange work, discussed below. Preliminary work with Ag-catalyzed ozone has been unsuccessful for extractions of Am(VI) from 6.5 M HNO3, and only one attempt at extraction, also from 6.5 M HNO3, using the electrolytic oxidation has been attempted. However, this high acid concentration was based on the highest Am extraction efficiency using the bismuthate oxidant; which is only sparingly soluble, and thus the oxidation yield is based on bismuthate solubility. Lower acid concentrations may be sufficient with alternative oxidants and work with Ag-ozone, Cu(III) and electrolysis is on-going. Two non

  11. The Influence of Naringin or Hesperidin Dietary Supplementation on Broiler Meat Quality and Oxidative Stability

    Science.gov (United States)

    Goliomytis, Michael; Kartsonas, Nikos; Charismiadou, Maria A.; Symeon, George K.; Simitzis, Panagiotis E.; Deligeorgis, Stelios G.

    2015-01-01

    An experiment was conducted to examine the effects of supplementing broiler feed with hesperidin or naringin, on growth performance, carcass characteristics, breast meat quality and the oxidative stability of breast and thigh meat. Two hundred and forty 1-day-old Ross 308 broiler chickens were randomly assigned to 6 groups. One of the groups served as a control (C) and was given commercial basal diets, whereas the other five groups were given the same diets further supplemented with naringin at 0.75 g/kg (N1), naringin at 1.5 g/kg (N2), hesperidin at 0.75 g/kg (E1), hesperidin at 1.5 g/kg (E2) and a-tocopheryl acetate at 0.2 g/kg (E). At 42 days of age, 10 chickens per treatment group were slaughtered for meat quality and oxidative stability assessment. No significant differences were observed among groups in final body weight, carcass weight and internal organs weights (P>0.05) apart from liver that decreased linearly with increased levels of naringin (P-linearmeat quality parameters, only redness (a*) value was higher in E1 and N1 group compared to VE group (P0.05). Measurement of lipid oxidation values showed that after hesperidin and naringin dietary supplementation, malondialdehyde values decreased in tissue samples in a dose depended manner (P-linearmeat antioxidative properties without negative implications on growth performance and meat quality characteristics in poultry, thus appearing as important additives for both the consumer and the industry. PMID:26509968

  12. Oxidative Stability of Tc(I) Tricarbonyl Species Relevant to the Hanford Tank Waste

    Energy Technology Data Exchange (ETDEWEB)

    Chatterjee, Sayandev [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hall, Gabriel B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Levitskaia, Tatiana G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walter, Eric D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Washton, Nancy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-17

    Technetium (Tc), which exists predominately in the liquid supernatant and salt cake fractions of the nuclear tank waste stored at the U.S. DOE Hanford Site, is one of the most difficult contaminants to dispose of and/or remediate. In the strongly alkaline environments prevalent in the tank waste, its dominant chemical form is pertechnetate (TcO4-, oxidation state +7). However, based on experimentation to-date, a significant fraction of the soluble Tc cannot be effectively separated from the wastes and may be present as a non-pertechnetate species. The presence of a non pertechnetate species significantly complicates disposition of low-activity waste (LAW), and the development of methods to either convert them to pertechnetate or to separate the non-pertechnetate species directly is needed. The challenge is the uncertainty regarding the nature and stability of the alkaline-soluble, low-valence, non pertechnetate species in the liquid tank waste. One objective of the Tc management project is to address this knowledge gap. This fiscal year (FY) 2015 report summarizes experimental work exploring the oxidative stability of model low-valence Tc(I) tricarbonyl species, derived from the [Tc(CO)3]+ moiety. These compounds are of interest due to their implied presence in several Hanford tank waste supernatants. Work in part was initiated in FY 2014, and a series of samples containing non-pertechnetate Tc generated ex situ or in situ in pseudo-Hanford tank supernatant simulant solutions was prepared and monitored for oxidation to Tc(VII) (Levitskaia et al. 2014). This experimentation continued in FY 2015, and new series of samples containing Tc(I) as [Tc(CO)3]+•Ligand was tested. The monitoring method used for these studies was a combination of 99Tc NMR and EPR spectroscopies.

  13. Bismuth alloy potting seals aluminum connector in cryogenic application

    Science.gov (United States)

    Flower, J. F.; Stafford, R. L.

    1966-01-01

    Bismuth alloy potting seals feedthrough electrical connector for instrumentation within a pressurized vessel filled with cryogenic liquids. The seal combines the transformation of high-bismuth content alloys with the thermal contraction of an external aluminum tube.

  14. Sensitivity, selectivity and stability of tin oxide nanostructures on large area arrays of microhotplates

    Science.gov (United States)

    Panchapakesan, Balaji; Cavicchi, Richard; Semancik, Steve; DeVoe, Don L.

    2006-01-01

    In this paper, the sensitivity, stability and selectivity of nanoparticle engineered tin oxide (SnO2) are reported, for microhotplate chemical sensing applications. 16 Å of metals such as nickel, cobalt, iron, copper and silver were selectively evaporated onto each column of the microhotplate array. Following evaporation, the microhotplates were heated to 500 °C and SnO2 was deposited on top of the microhotplates using a self-aligned chemical vapour deposition process. Scanning electron microscopy characterization revealed control of SnO2 nanostructures in the range of 20-121 nm. Gas sensing in seven different hydrocarbons revealed that metal nanoparticles that helped in producing faster nucleation of SnO2 resulted in smaller grain size and higher sensitivity. Sensitivity as a function of concentration and grain size is addressed for tin oxide nanostructures. Smaller grain sizes resulted in higher sensitivity of tin oxide nanostructures. Temperature programmed sensing of the devices yielded shape differences in the response between air and methanol, illustrating selectivity. Spiderweb plots were used to monitor the materials programmed selectivity. The shape differences between different gases in spiderweb plots illustrate materials selectivity as a powerful mapping approach for monitoring selectivity in various gases. Continuous monitoring in 80 ppm methanol yielded stable sensor response for more than 200 h. This comprehensive study illustrates the use of a nanoparticle engineering approach for sensitive, selective and stable gas sensing applications.

  15. Chitosan-graphene oxide films and CO2-dried porous aerogel microspheres: Interfacial interplay and stability.

    Science.gov (United States)

    Frindy, Sana; Primo, Ana; Ennajih, Hamid; El Kacem Qaiss, Abou; Bouhfid, Rachid; Lahcini, Mohamed; Essassi, El Mokhtar; Garcia, Hermenegildo; El Kadib, Abdelkrim

    2017-07-01

    The intimate interplay of chitosan (CS) and graphene oxide (GO) in aqueous acidic solution has been explored to design upon casting, nanostructured "brick-and-mortar" films (CS-GO-f) and by acidic-to-basic pH inversion, porous CO 2 -dried aerogel microspheres (CS-GO-m). Owing to the presence of oxygenated functional groups in GO, good-quality crack-free hybrid films were obtained. Mechanical properties were improved independently of the GO content and it was found that a 20wt% loading affords hybrid film characterized with a Young modulus three times superior to that reached with the same loading of layered clay. The presence of graphene oxide was found to be detrimental for the thermal stability of the polysaccharide at T clay bio-hybrids, a result rooted in the substantial hydrophobic character imparted by the addition of graphenic material to the polysaccharide skeleton. In essence, this contribution demonstrates that graphene oxide loading do not disturb neither the filmogenicity of chitosan nor its gelation ability and constitutes a promising route for novel chitosan-based functional hybrid materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Balancing activity, stability and conductivity of nanoporous core-shell iridium/iridium oxide oxygen evolution catalysts.

    Science.gov (United States)

    Kim, Yong-Tae; Lopes, Pietro Papa; Park, Shin-Ae; Lee, A-Yeong; Lim, Jinkyu; Lee, Hyunjoo; Back, Seoin; Jung, Yousung; Danilovic, Nemanja; Stamenkovic, Vojislav; Erlebacher, Jonah; Snyder, Joshua; Markovic, Nenad M

    2017-11-13

    The selection of oxide materials for catalyzing the oxygen evolution reaction in acid-based electrolyzers must be guided by the proper balance between activity, stability and conductivity-a challenging mission of great importance for delivering affordable and environmentally friendly hydrogen. Here we report that the highly conductive nanoporous architecture of an iridium oxide shell on a metallic iridium core, formed through the fast dealloying of osmium from an Ir 25 Os 75 alloy, exhibits an exceptional balance between oxygen evolution activity and stability as quantified by the activity-stability factor. On the basis of this metric, the nanoporous Ir/IrO 2 morphology of dealloyed Ir 25 Os 75 shows a factor of ~30 improvement in activity-stability factor relative to conventional iridium-based oxide materials, and an ~8 times improvement over dealloyed Ir 25 Os 75 nanoparticles due to optimized stability and conductivity, respectively. We propose that the activity-stability factor is a key "metric" for determining the technological relevance of oxide-based anodic water electrolyzer catalysts.

  17. Evolution of oxidation in soybean oil and its biodiesel under the conditions of the oxidation stability test

    Directory of Open Access Journals (Sweden)

    Pereira, G. G.

    2013-12-01

    Full Text Available The objective of this study was to know the evolution of the oxidation of soybean oil and biodiesel under the conditions of the oxidation stability test (110 °C using the Rancimat apparatus. Samples were analyzed at different periods of time until the end of the induction period. The analytical determinations related to the changes in oxidation include peroxide value, anisidine value, natural tocopherols and polar compounds. Acid value, kinematic viscosity, polymers and ester content were also analyzed because of their relevance in the evaluation of biodiesel quality. Results showed that only peroxide value and the group of polar compounds including hydroperoxides, i.e. oxidized monomeric TAG in the oil and oxidized monomeric FAME in the biodiesel increased significantly during the early oxidation stage. The end of the induction period was marked by a rapid increase in polymerization compounds and the exhaustion of tocopherols. Significant changes in acid value, viscosity and ester content were only observed after the end of the induction period.El objetivo de este estudio fue conocer la evolución de la oxidación del aceite de soja y de su biodiesel a 110 °C en las condiciones del método estándar para la determinación de la estabilidad oxidativa, usando el aparato Rancimat. Las muestras se analizaron en diferentes períodos de tiempo hasta que el período de inducción fue sobrepasado. Se determinaron los índices de peróxidos y anisidina, los tocoferoles y los compuestos polares cuyos cambios están relacionados con el desarrollo de la alteración oxidativa. Además, fueron determinados el índice de acidez, la viscosidad y el contenido en ésteres, de interés en el análisis de la calidad del biodiesel. Los resultados indicaron que sólo el índice de peróxidos y el grupo de compuestos polares que incluye los hidroperóxidos (triglicéridos oxidados monómeros en el aceite y ésteres metílicos oxidados monómeros en el biodiesel

  18. Improving oxidative stability of olive oil: Incorporation of Spirulina and evaluation of its synergism with citric acid

    International Nuclear Information System (INIS)

    Alavi, N.; Golmakani, M.T.

    2017-01-01

    The effects of different Spirulina concentrations used alone and in combination with citric acid on the oxidative stability of olive oil were assessed. The amounts of primary and secondary oxidation products produced in Spirulina samples were lower than that of the control. The improved oxidative stability indices of Spirulina samples with and without citric acid were in the range of 85.20–94.47% and 258.10–260.21%, respectively. In comparison with the control, Spirulina samples manifested significantly higher carotenoid and chlorophyll contents at the beginning and end of the storage period. The presence of these bioactive compounds results from the presence of Spirulina in the medium and can thus retard the oxidation of olive oil. A higher oxidative stability was reached using BHT in comparison with Spirulina samples. Furthermore, no synergistic action was observed in possible connections between citric acid and Spirulina. In conclusion, Spirulina can enhance oxidative stability and improve the shelf life of olive oil. [es

  19. Liquid Bismuth Propellant Flow Sensor

    Science.gov (United States)

    Polzin, Kurt A.; Stanojev, B. J.; Korman, V.

    2007-01-01

    Quantifying the propellant mass flow rate in liquid bismuth-fed electric propulsion systems has two challenging facets. First, the flow sensors must be capable of providing a resolvable measurement at propellant mass flow rates on the order of 10 mg/see with and uncertainty of less that 5%. The second challenge has to do with the fact that the materials from which the flow sensors are fabricated must be capable of resisting any of the corrosive effects associated with the high-temperature propellant. The measurement itself is necessary in order to properly assess the performance (thrust efficiency, Isp) of thruster systems in the laboratory environment. The hotspot sensor[I] has been designed to provide the bismuth propellant mass flow rate measurement. In the hotspot sensor, a pulse of thermal energy (derived from a current pulse and associated joule heating) is applied near the inlet of the sensor. The flow is "tagged" with a thermal feature that is convected downstream by the flowing liquid metal. Downstream, a temperature measurement is performed to detect a "ripple" in the local temperature associated with the passing "hotspot" in the propellant. By measuring the time between the upstream generation and downstream detection of the thermal feature, the flow speed can be calculated using a "time of flight" analysis. In addition, the system can be calibrated by measuring the accumulated mass exiting the system as a-function of time and correlating this with the time it takes the hotspot to convect through the sensor. The primary advantage of this technique is that it doesn't depend on an absolute measurement of temperature but, instead, relies on the observation of thermal features. This makes the technique insensitive to other externally generated thermal fluctuations. In this paper, we describe experiments performed using the hotspot flow sensor aimed at quantifying the resolution of the sensor technology. Propellant is expelled onto an electronic scale to

  20. Oxidative stability of rice bran, corn, canola, sunflower and soybean oils d baking process and storage of bread

    Directory of Open Access Journals (Sweden)

    Najmeh Jahani

    2016-01-01

    Full Text Available Oxidation of bread lipids during baking and storage reduces the nutritional value of the product and leads to the formation of off-flavors and off-odors. In this research, oxidative stability of rice bran, corn, canola, sunflower and soybean oils during Brotchen bread baking process and storage was evaluated. Baking process caused a significant increase in oxidative indices such as peroxide, anisidine, Totox and thiobarbitoric acid values and free fatty acid content. However, storage of breads for 6 days in room temperature did not affect the value of the indices. Generaly, the value of the indices in bread containing rice bran oil was lower than those of the other breads, which indicated the higher oxidative stability of rice bran oil in baking process and storage. Pure oils treated in simulated baking process and storage had an oxidative quality similar to that of breads. This means that bread ingridients may not have an effect on oil oxidative stability. Bread containing rice bran oil gained also higher scores in sensory evaluation, which of course were in agree with its better oxidative status.

  1. Achieving synergy between chemical oxidation and stabilization in a contaminated soil.

    Science.gov (United States)

    Srivastava, Vipul J; Hudson, Jeffrey Michael; Cassidy, Daniel P

    2016-07-01

    Eight in situ solidification/stabilization (ISS) amendments were tested to promote in situ chemical oxidation (ISCO) with activated persulfate (PS) in a contaminated soil. A 3% (by weight) dose of all ISS amendments selected for this study completely activated a 1.5% dose of PS within 3 h by raising temperatures above 30 °C (heat activation) and/or increasing pH above 10.5 (alkaline activation). Heat is released by the reaction of CaO with water, and pH increases because this reaction produces Ca(OH)2. Heat activation is preferred because it generates 2 mol of oxidizing radicals per mole of PS, whereas alkaline activation releases only 1. The relative contribution of heat vs. alkaline activation increased with CaO content of the ISS amendment, which was reflected by enhanced contaminant oxidation with increasing CaO content, and was confirmed by comparing to controls promoting purely heat or alkaline (NaOH) activation. The test soil was contaminated with benzene, toluene, ethylbenzene, and xylenes (BTEX) and polycyclic aromatic hydrocarbons (PAH), particularly naphthalene (NAP). ISS-activated PS oxidized between 47% and 84% of the BTEX & NAP, and between 13% and 33% of the higher molecular weight PAH. ISS-activated PS reduced the leachability of BTEX & NAP by 76%-91% and of the 17 PAH by 83%-96%. Combined ISCO/ISS reduced contaminant leachability far than ISCO or ISS treatments alone, demonstrating the synergy that is possible with combined remedies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Studies on bismuth carboxylates—synthesis and characterization of ...

    Indian Academy of Sciences (India)

    1. Introduction. A large number of bismuth compounds are clinically active against Helicobacter pylori and other gastroin- testinal disorders.1–2 Prominent among these are bis- muth subsalicylate (trade name Pepto-Bismol), col- loidal bismuth subcitrate (CBS, trade name De-Nol) and ranitidine bismuth citrate (trade name ...

  3. Short report: evaluation of Helicobacter pylori eradication with bismuth sucralfate

    NARCIS (Netherlands)

    Reijers, M. H.; Noach, L. A.; Tytgat, G. N.

    1994-01-01

    In a pilot study we have evaluated the clinical efficacy of bismuth sucralfate to eradicate H. pylori. Ten consecutive patients with chronic dyspepsia and H. pylori associated gastritis were treated with bismuth sucralfate (220 mg bismuth per tablet, 4 tablets per day for 4 weeks). If a 14C urea

  4. 21 CFR 520.1204 - Kanamycin, bismuth subcarbonate, activated attapulgite.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Kanamycin, bismuth subcarbonate, activated... § 520.1204 Kanamycin, bismuth subcarbonate, activated attapulgite. (a) Specifications—(1) Each 5 milliliters (mL) of suspension contains 100 milligrams (mg) kanamycin (as the sulfate), 250 mg bismuth...

  5. Effect of metal oxides on the stabilization of soil organic matter

    Science.gov (United States)

    Stelmach, Wioleta

    2017-04-01

    Soil organic matter (SOM) is protected from decomposition by three mechanisms: 1) biochemical stabilization through the accumulation of recalcitrant SOM compounds, 2) physical stabilization, i.e. spatial inaccessibility of SOM for microbes, and 3) chemical protection of SOM through intimate interaction with minerals and metal oxides. The latter mechanisms suggest that added organic substances (i.e. post-fermentation sludge) can be stabilized by metal oxides to increase C sequestration in soil. The aim of this study was to determine the effects of Fe2O3 - one of the dominant metal oxides in soil - on the sequestration of post-fermentation sludge C in soil by separately tracing the decomposition of sludge and of SOM to carbon dioxide (CO2). To determine changes in SOM turnover after the addition of post-fermentation sludge without/with Fe2O3, the isotopic signatures of both C sources (SOM and post-fermentation sludge) were used. Using differences in the 13C natural abundance of the soil (C3 originated, δ13C = -26) and the post-fermentation sludge (C4 originated, δ13C = -18), the CO2 fluxes arising from both C sources were tracked. Addition of post-fermentation sludge to the soil increased the CO2 production by 30% compared to soil without sludge. δ13C analysis of the total CO2 efflux revealed that post-fermentation sludge decreased SOM decomposition. Fe2O3 slightly suppressed sludge decomposition, and therefore increased C sequestration in soil. Only 30% of the post-fermentation sludge had been mineralized after one month of incubation in the soil. The collective results of my study reveal that application of post-fermentation sludge suppresses SOM decomposition, suggesting its use as a fertilizer could positively influence long-term soil quality. Finally, the success of the 13C natural abundance microcosm labeling approach in my study supports its use as an effective method of analyzing the effects of various fertilization techniques on soil nutrient retention

  6. Denaturation and Oxidative Stability of Hemp Seed (Cannabis sativa L.) Protein Isolate as Affected by Heat Treatment.

    Science.gov (United States)

    Raikos, Vassilios; Duthie, Garry; Ranawana, Viren

    2015-09-01

    The present study investigated the impact of heat treatments on the denaturation and oxidative stability of hemp seed protein during simulated gastrointestinal digestion (GID). Heat-denatured hemp protein isolate (HPI) solutions were prepared by heating HPI (2 mg/ml, pH 6.8) to 40, 60, 80 and 100 °C for 10 min. Heat-induced denaturation of the protein isolates was monitored by polyacrylamide gel electrophoresis. Heating HPI at temperatures above 80 °C significantly reduced solubility and led to the formation of large protein aggregates. The isolates were then subjected to in vitro GID and the oxidative stability of the generated peptides was investigated. Heating did not significantly affect the formation of oxidation products during GID. The results suggest that heat treatments should ideally remain below 80 °C if heat stability and solubility of HPI are to be preserved.

  7. On radiation stability of the advanced for nuclear technique of the construction oxides material

    International Nuclear Information System (INIS)

    Abdukadirova, I.Kh.

    2004-01-01

    Full text: Al 2 O 3 oxide (as some metal oxides) is one of the prospective high-k electro-insulators and construction oxides materials, in particular, for the ceramics fuel material and the first wall of thermonuclear reactor. Besides, this oxide is used widely as an active element or substrate for lasers and MOS systems, as a film coating and receiver of IR-radiation. From here this work is aimed at investigation of radiation stability of the physical properties and structure of Al 2 O 3 oxide after irradiation to a high fluence in the reactor. In this connection the peculiarities of radiation effect on lattice parameters (a,c), form and position of several reflections, reflection coefficient and frequency of valence and deformation oscillations of Al-O bonds, electric characteristics of the oxide were studied with techniques of X-diffraction, dielectric and IR-reflection spectroscopy. For example, this communication presents the results on X-ray structure investigation of σ after irradiation to high neutron doses (F). X-diffraction patterns were obtained using a roentgen diffractometer. Particular attention was paid to dynamics of form and positions some representative reflexes. The diffraction patterns showed essential changes of peak intensity and position depending upon F, the Bragg angle 2 Θ decreases with an increase in dose, the lattice parameters of crystals ( a, c ) was undergone anisotropy expansion, at very high dose of change this parameters is not so much as Δc= 0,0038 nm and Δa = 0,0014 nm. Besides, it is shown that at these doses some halo appears at the diffraction patterns. The mechanism of atom displacement out of lattice knots plays the main role in radiation damage of crystals irradiated to high doses. The optical characteristics - a reflection coefficient and frequency of valence (736, 614 cm -1 ) and deformation (464 cm -1 ) oscillations of Al-O bonds of the oxide were studied with techniques of IR-reflection spectroscopy in region of

  8. Color stability and lipid oxidation of broiler breast meat from animals raised on organic versus non-organic production systems.

    Science.gov (United States)

    Viana, F M; Canto, A C V C S; Costa-Lima, B R C; Salim, A P A A; Conte-Junior, C A

    2017-03-01

    The aim of the present research was to evaluate the influence of organic and non-organic production systems on color stability and lipid oxidation of broiler meat Pectoralis major (PM) stored under refrigeration (4°C) for 9 days. PM samples from organic (ORG) and non-organic (NORG) production systems were compared based on physicochemical analyses (instrumental color, myoglobin concentration, metmyoglobin reducing activity (MRA), pH, and lipid oxidation) performed in 4 different trials (n = 4). In general, NORG broilers demonstrated higher (P production system can affect color and lipid stability of broiler breast meat during storage. © 2016 Poultry Science Association Inc.

  9. Microstructural densification and electrical performance of yttria stabilized zirconia SOCF (Solid Oxide Fuel Cell) electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, J.G. de M., E-mail: furtado@cepel.b [Centro de Pesquisas de Energia Eletrica (ELETROBRAS/CEPEL), Rio de Janeiro, RJ (Brazil); Silva, C.A. da; Miranda, P.E.V. de [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Metalurgica e de Materiais

    2010-07-01

    The understanding of the mechanisms associated with densification and sintering of Yttria stabilized zirconia (YSZ), a main solid oxide fuel cell electrolyte, enables the improvement of its microstructure. The present work that has the objective to study the sintering and densification processes of polycrystalline nanostructured 8% mol YSZ (8YSZ), correlating the microstructural development with the electrical performance of the material. The sintering behaviors of nanocrystalline 8YSZ powders obtained by two different chemical synthesis techniques (glycine-nitrate combustion process and Pechini method) were studied based on sintering dilatometer method. X-ray diffraction and scanning electron microscopy were used in the microstructural characterization. Full-densified 8YSZ (98.8%) were obtained and it was found that the samples obtained by the Pechini's method showed a higher densification degree in the final stage of sintering and resulted in ceramics with higher final relative density and better electrical behavior. (author)

  10. A novel topical association with zinc oxide, chamomile and aloe vera extracts - stability and safety studies

    Directory of Open Access Journals (Sweden)

    Catarina Reis

    2015-12-01

    Full Text Available Currently, natural products show an enormous potential for pharmaceutical and cosmetic industries. The goals of this study were to formulate and to characterise a novel combination of natural products. Formulations were 1 an oil-in-water emulsion, 2 a water-in-oil emulsion and 3 a cleansing solution. Zinc oxide was chosen as an active ingredient due to its healing properties, and chamomile and aloe vera extracts were chosen due to their antiseptic, anti-inflammatory and tissue regenerating properties. Organoleptic characteristics, pH, viscosity and in vitro efficacy for the most common bacteria and yeast of human skin were evaluated. Preliminary and accelerated stability studies and safety tests were also performed. All optimized products were stable, smooth in texture, effective against bacteria and yeast, and safe, justifying further studies. Results suggest that these novel products might be a promising source of natural compounds with soothing and regenerative properties for skin care.

  11. Physicochemical properties and oxidative stability of bleached pomace-olive oil on Tunisian activated clays

    International Nuclear Information System (INIS)

    Jahouach, Wafa

    2002-01-01

    This work is a contribution to studying bleaching process, which is an important stage in refining of vegetable oils. This process permitted to reduce or convert undesired constituents to harmless ones from oils and fats. Virgin olive oil, considered as reference, and pomace-olive oil were bleached in optimal conditions using Tunisian activated clays ( collected from the South of Tunisia) which were prepared in our laboratory and compared with commercial bleaching earths. It was shown that activated Tunisian clays are characterized by a very important adsorptive capacity, which is similar to that of commercial ones. In addition, the study of physicochemical properties of bleached oils was considered. The fatty acid composition (GC), the triacylglycerol composition (HPLC), and oxidative stability (UV spectrometry) allowed to conclude that treated oils do not undergo considerable physicochemical alterations and their caracteristics remain in concordance with international standards relative to edible refined oils. (Author)

  12. Balancing activity, stability and conductivity of nanoporous core-shell iridium/iridium oxide oxygen evolution catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong-Tae; Lopes, Pietro Papa; Park, Shin-Ae; Lee, A-Yeong; Lim, Jinkyu; Lee, Hyunjoo; Back, Seoin; Jung, Yousung; Danilovic, Nemanja; Stamenkovic, Vojislav; Erlebacher, Jonah; Snyder, Joshua; Markovic, Nenad M.

    2017-11-13

    The selection of oxide materials for catalyzing the Oxygen Evolution Reaction in acid-based electrolyzers must be guided by the proper balance between activity, stability and conductivity – a challenging mission of great importance for delivering affordable and environmentally friendly hydrogen. Here we report that the highly conductive nanoporous architecture of an iridium oxide shell on a metallic iridium core, formed through the fast dealloying of osmium from an Ir25Os75 alloy, exhibits an exceptional balance between oxygen evolution activity and stability as quantified by the Activity-Stability FactorASF. Based on this metric, the nanoporous Ir/IrO2 morphology of dealloyed Ir25Os75 shows a factor of ~30 improvement ASFrelative to conventional Ir-based oxide materials and a ~8 times improvement over dealloyed Ir25Os75 nanoparticles due to optimized stability and conductivity, respectively. We propose that the Activity-Stability FactorASF is the key “metric” for determining the technological relevance of oxide-based anodic water electrolyzer catalysts.

  13. Improving the phase stability and oxidation resistance of β-NiAl

    Energy Technology Data Exchange (ETDEWEB)

    Brammer, Travis [Iowa State Univ., Ames, IA (United States)

    2011-01-01

    replacing Ni based superalloys. Modifications to NiAl were explored to increase the phase stability and oxidation resistance which would allow these alloys to be used at even higher temperatures yielding greater efficiencies. The extended Miedema model was an effective tool that screened all of the potential phase space for ternary substitutions to NiAl and found the few potential systems worth further investigation. After production of the alloys it was determined that Ir, Rh, and Pd were the top candidates for substitution on Ni site up to 12 at%. The melting temperature of NiAl could be increased as much as 150 C with 12 at% Ir and 130 C with 12 at% Rh substitution. Pall adium on the other hand decreased the melting temperature by 50 C at the 12 at% substitution level. The grain size was found to have a profound influence on the oxidation resistance. Both Ir and Rh substitutions resulted in finer grain sizes compared to Pd substitutions or base NiAl. The grain size increased drastically during high temperature annealing with the PGM substitutions hindering grain growth only slightly. However, the addition of 0.05 at% Hf limited the grain growth dramatically during high temperature annealing. NiAl inherently has respectable oxidation resistance up to 1100 C. It was found through experimental testing that both Ir and Rh substitutions improve the oxidation resistance of NiAl at ultra-high temperatures with Ir performing the best. Both PGM substitutions decreased the growth rate as well as forming a more adherent oxide scale. Pd substitutions appeared to have a negligible effect to the oxidation resistance of NiAl. Hafnium addition of 0.05 at% was found to decrease the oxidation rate as well as increase the scale adherence. The combination of both Ir substitution (6-9 at%) and Hf addition (0.05 at%) produced the alloy with the best oxidation resistance. Although improvements in phase stability and oxidation resistance have been made to the NiAl system, more development and

  14. Antioxidant Effectiveness of Vegetable Powders on the Lipid and Protein Oxidative Stability of Cooked Turkey Meat Patties: Implications for Health

    Directory of Open Access Journals (Sweden)

    Wendy Russell

    2013-04-01

    Full Text Available Lipid and protein oxidation decreases the shelf-life of foods and may result in formation of end-products potentially detrimental for health. Consumer pressure to decrease the use of synthetic phenolic antioxidants has encouraged identification of alternative compounds or extracts from natural sources. We have assessed whether inclusion of dried vegetable powders improves the oxidative stability of turkey meat patties. Such powders are not only potentially-rich sources of phenolic antioxidants, but also may impart additional health benefits, as inadequate vegetable consumption is a risk factor for heart disease and several cancers. In an accelerated oxidation system, six of eleven vegetable powders significantly (p < 0.05 improved oxidative stability of patties by 20%–30% (spinach < yellow pea < onion < red pepper < green pea < tomato. Improved lipid oxidative stability was strongly correlated with the decreased formation of protein carbonyls (r = 0.747, p < 0.01. However, improved lipid stability could not be ascribed to phenolic acids nor recognized antioxidants, such as α- and γ-tocopherol, despite their significant (p < 0.01 contribution to the total antioxidant capacity of the patties. Use of chemically complex vegetable powders offers an alternative to individual antioxidants for increasing shelf-life of animal-based food products and may also provide additional health benefits associated with increased vegetable intake.

  15. Amorphous Mixed-Valence Vanadium Oxide/Exfoliated Carbon Cloth Structure Shows a Record High Cycling Stability.

    Science.gov (United States)

    Song, Yu; Liu, Tian-Yu; Yao, Bin; Kou, Tian-Yi; Feng, Dong-Yang; Liu, Xiao-Xia; Li, Yat

    2017-04-01

    Previous studies show that vanadium oxides suffer from severe capacity loss during cycling in the liquid electrolyte, which has hindered their applications in electrochemical energy storage. The electrochemical instability is mainly due to chemical dissolution and structural pulverization of vanadium oxides during charge/discharge cyclings. In this study the authors demonstrate that amorphous mixed-valence vanadium oxide deposited on exfoliated carbon cloth (CC) can address these two limitations simultaneously. The results suggest that tuning the V 4+ /V 5+ ratio of vanadium oxide can efficiently suppress the dissolution of the active materials. The oxygen-functionalized carbon shell on exfoliated CC can bind strongly with VO x via the formation of COV bonding, which retains the electrode integrity and suppresses the structural degradation of the oxide during charging/discharging. The uptake of structural water during charging and discharging processes also plays an important role in activating the electrode material. The amorphous mixed-valence vanadium oxide without any protective coating exhibits record-high cycling stability in the aqueous electrolyte with no capacitive decay in 100 000 cycles. This work provides new insights on stabilizing vanadium oxide, which is critical for the development of vanadium oxide based energy storage devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Coriander seed oil methyl esters as biodiesel fuel: Unique fatty acid composition and excellent oxidative stability

    Energy Technology Data Exchange (ETDEWEB)

    Moser, Bryan R.; Vaughn, Steven F. [United States Department of Agriculture, Agricultural Research Service, National Center for Agricultural Utilization Research, 1815 N. University St, Peoria, IL 61604 (United States)

    2010-04-15

    Coriander (Coriandrum sativum L.) seed oil methyl esters were prepared and evaluated as an alternative biodiesel fuel and contained an unusual fatty acid hitherto unreported as the principle component in biodiesel fuels: petroselinic (6Z-octadecenoic; 68.5 wt%) acid. Most of the remaining fatty acid profile consisted of common 18 carbon constituents such as linoleic (9Z,12Z-octadeca-dienoic; 13.0 wt%), oleic (9Z-octadecenoic; 7.6 wt%) and stearic (octadecanoic; 3.1 wt%) acids. A standard transesterification procedure with methanol and sodium methoxide catalyst was used to provide C. sativum oil methyl esters (CSME). Acid-catalyzed pretreatment was necessary beforehand to reduce the acid value of the oil from 2.66 to 0.47 mg g{sup -1}. The derived cetane number, kinematic viscosity, and oxidative stability (Rancimat method) of CSME was 53.3, 4.21 mm{sup 2} s{sup -1} (40 C), and 14.6 h (110 C). The cold filter plugging and pour points were -15 C and -19 C, respectively. Other properties such as acid value, free and total glycerol content, iodine value, as well as sulfur and phosphorous contents were acceptable according to the biodiesel standards ASTM D6751 and EN 14214. Also reported are lubricity, heat of combustion, and Gardner color, along with a comparison of CSME to soybean oil methyl esters (SME). CSME exhibited higher oxidative stability, superior low temperature properties, and lower iodine value than SME. In summary, CSME has excellent fuel properties as a result of its unique fatty acid composition. (author)

  17. Stabilizing small molecules on metal oxide surfaces using atomic layer deposition.

    Science.gov (United States)

    Hanson, Kenneth; Losego, Mark D; Kalanyan, Berç; Parsons, Gregory N; Meyer, Thomas J

    2013-10-09

    Device lifetimes and commercial viability of dye-sensitized solar cells (DSSCs) and dye-sensitized photoelectrosynthesis cells (DSPECs) are dependent on the stability of the surface bound molecular chromophores and catalysts. Maintaining the integrity of the solution-metal oxide interface is especially challenging in DSPECs for water oxidation where it is necessary to perform high numbers of turnovers, under irradiation in an aqueous environment. In this study, we describe the atomic layer deposition (ALD) of TiO2 on nanocrystalline TiO2 prefunctionalized with the dye molecule [Ru(bpy)2(4,4'-(PO3H2)bpy)](2+) (RuP) as a strategy to stabilize surface bound molecules. The resulting films are over an order of magnitude more photostable than untreated films and the desorption rate constant exponentially decreases with increased thickness of ALD TiO2 overlayers. However, the injection yield for TiO2-RuP with ALD TiO2 also decreases with increasing overlayer thickness. The combination of decreased injection yield and 95% quenched emission suggests that the ALD TiO2 overlayer acts as a competitive electron acceptor from RuP*, effectively nonproductively quenching the excited state. The ALD TiO2 also increases back electron transfer rates, relative to the untreated film, but is independent of overlayer thickness. The results for TiO2-RuP with an ALD TiO2 overlayer are compared with similar films having ALD Al2O3 overlayers.

  18. Coriander seed oil methyl esters as biodiesel fuel: Unique fatty acid composition and excellent oxidative stability

    International Nuclear Information System (INIS)

    Moser, Bryan R.; Vaughn, Steven F.

    2010-01-01

    Coriander (Coriandrum sativum L.) seed oil methyl esters were prepared and evaluated as an alternative biodiesel fuel and contained an unusual fatty acid hitherto unreported as the principle component in biodiesel fuels: petroselinic (6Z-octadecenoic; 68.5 wt%) acid. Most of the remaining fatty acid profile consisted of common 18 carbon constituents such as linoleic (9Z,12Z-octadeca-dienoic; 13.0 wt%), oleic (9Z-octadecenoic; 7.6 wt%) and stearic (octadecanoic; 3.1 wt%) acids. A standard transesterification procedure with methanol and sodium methoxide catalyst was used to provide C. sativum oil methyl esters (CSME). Acid-catalyzed pretreatment was necessary beforehand to reduce the acid value of the oil from 2.66 to 0.47 mg g -1 . The derived cetane number, kinematic viscosity, and oxidative stability (Rancimat method) of CSME was 53.3, 4.21 mm 2 s -1 (40 o C), and 14.6 h (110 o C). The cold filter plugging and pour points were -15 o C and -19 o C, respectively. Other properties such as acid value, free and total glycerol content, iodine value, as well as sulfur and phosphorous contents were acceptable according to the biodiesel standards ASTM D6751 and EN 14214. Also reported are lubricity, heat of combustion, and Gardner color, along with a comparison of CSME to soybean oil methyl esters (SME). CSME exhibited higher oxidative stability, superior low temperature properties, and lower iodine value than SME. In summary, CSME has excellent fuel properties as a result of its unique fatty acid composition.

  19. Loss in tocopherols and oxidative stability during the frying of frozen cassava chips

    Directory of Open Access Journals (Sweden)

    Corsini, Mara S.

    2009-03-01

    Full Text Available The present study was aimed at verifying tocopherols losses and oxidative stability changes in vegetable oils used in discontinuous frying. The frying of frozen cassava chips was carried out in a household electric frying pan, where the oil was heated to a temperature of 180°C for 25 hours, with fresh oil replacement. The results obtained from the analytical determinations were submitted to variance analysis, in a factorial scheme, using a completely randomized design, making it possible to determine the influence of the type of oil and frying times on changes in the oil. The data show that the smallest changes occur in palm oil, which is more saturated. For sunflower and cottonseed oils, which are more unsaturated, there was a clear decrease in both tocopherol concentration and oxidative stability.El objetivo de este trabajo fue analizar los cambios en la concentración de tocoferoles y la evolución de la alteración oxidativa en aceites vegetales utilizados en fritura discontinua. La fritura de palitos de mandioca congelados fue realizada en una freidora eléctrica doméstica, en la cual el aceite fue calentando a 180°C, durante 25 horas, con reposición de aceite fresco. Los resultados obtenidos de las determinaciones analíticas fueron sometidos a análisis de variancia, en esquema factorial para determinar la influencia de los factores aceite y tiempo de fritura sobre las alteraciones en los aceites. Los resultados muestran que las menores alteraciones ocurren para el aceite de palma, más saturado. Para los aceites de algodón y girasol, más insaturados, se verificó que, conforme disminuyó la concentración de tocoferoles, disminuye la estabilidad oxidativa.

  20. Repeated deflation of a gas-barrier cuff to stabilize cuff pressure during nitrous oxide anesthesia.

    Science.gov (United States)

    Karasawa, Fujio; Matsuoka, Nobuhiro; Kodama, Mitsuyoshi; Okuda, Tomohiro; Mori, Tomohisa; Kawatani, Yasushi

    2002-07-01

    Although a nitrous oxide (N(2)O) gas-barrier cuff effectively limits the increase of cuff pressure during N(2)O anesthesia, there are few data assessing whether an N(2)O gas-barrier cuff is more beneficial for stabilizing intracuff pressure than standard endotracheal tubes when cuffs are repeatedly deflated to stabilize pressure during N(2)O anesthesia. In the present study, the pressure of air-filled standard-type cuffs (Trachelon; Terumo, Tokyo, Japan) and N(2)O gas-barrier type endotracheal tube cuffs (Profile Soft-Seal Cuff [PSSC]; Sims Portex, Kent, UK) was measured during 67% N(2)O anesthesia (n = 8 in each), during which the cuffs were repeatedly deflated every 30 min (Trachelon) or 60 min (PSSC) for the first 3 or 4 h. After aspirating the cuffs for 3 h, the cuff pressure exceeded 22 mm Hg in more than half of the patients in both groups. However, aspiration of the cuffs for 4 h decreased the maximal cuff pressure between deflation intervals in both groups (P deflating the cuffs over 4 h, the cuff pressure in both groups never exceeded 22 mm Hg during the subsequent 3 h, and intracuff N(2)O concentrations did not significantly change. Therefore, deflation of cuffs for 4 h during N(2)O anesthesia sufficiently stabilized cuff pressure and equilibrated the intracuff N(2)O concentrations in both groups. The use of the PSSC endotracheal tube might be more practical because of the smaller number of cuff deflations required, but the PSSC does not reduce the duration of cuff deflations to stabilize the pressure. We demonstrated that the N(2)O concentration and pressure in the N(2)O-barrier Profile Soft-Seal Cuff stabilized when the cuff was aspirated once an hour for 4 h during N(2)O anesthesia. The Profile Soft-Seal Cuff might be easier to use in clinical practice than standard endotracheal tubes because of the smaller number of cuff deflations required.

  1. Sonochemical synthesis of bismuth(III) nano coordination compound and direct synthesis of Bi.sub.2./sub.O.sub.3./sub. nanoparticles from a bismuth(III) nano coordination compound precursor

    Czech Academy of Sciences Publication Activity Database

    Roodsari, M.S.; Shaabani, B.; Mirtamizdoust, B.; Dušek, Michal; Fejfarová, Karla

    2015-01-01

    Roč. 25, č. 5 (2015), s. 1226-1232 ISSN 1574-1443 Grant - others:AV ČR(CZ) Praemium Academiae Institutional support: RVO:68378271 Keywords : nano coordination compound * sonochemical method * intramolecular proton transfer * nano bismuth oxide * isoniazid Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.308, year: 2015

  2. Investigation on the use of graphene oxide as novel surfactant to stabilize weakly charged graphene nanoplatelets.

    Science.gov (United States)

    Kazi, Salim Newaz; Badarudin, Ahmad; Zubir, Mohd Nashrul Mohd; Ming, Huang Nay; Misran, Misni; Sadeghinezhad, Emad; Mehrali, Mohammad; Syuhada, Nur Ily

    2015-01-01

    This paper presents a unique synergistic behavior between a graphene oxide (GO) and graphene nanoplatelet (GnP) composite in an aqueous medium. The results showed that GO stabilized GnP colloid near its isoelectric point and prevented rapid agglomeration and sedimentation. It was considered that a rarely encountered charge-dependent electrostatic interaction between the highly charged GO and weakly charged GnP particles kept GnP suspended at its rapid coagulation and phase separation pH. Sedimentation and transmission electron microscope (TEM) micrograph images revealed the evidence of highly stable colloidal mixtures while zeta potential measurement provided semi-quantitative explanation on the mechanism of stabilization. GnP suspension was confirmed via UV-vis spectral data while contact angle measurement elucidated the close resemblance to an aqueous solution indicating the ability of GO to mediate the flocculation prone GnP colloids. About a tenfold increase in viscosity was recorded at a low shear rate in comparison to an individual GO solution due to a strong interaction manifested between participating colloids. An optimum level of mixing ratio between the two constituents was also obtained. These new findings related to an interaction between charge-based graphitic carbon materials would open new avenues for further exploration on the enhancement of both GO and GnP functionalities particularly in mechanical and electrical domains.

  3. Determination of trace amounts of lead and cadmium using a bismuth/glassy carbon composite electrode.

    Science.gov (United States)

    Hwang, Gil-Ho; Han, Won-Kyu; Hong, Seok-Jun; Park, Joon-Shik; Kang, Sung-Goon

    2009-02-15

    We examined the use of a bismuth-glassy carbon (Bi/C) composite electrode for the determination of trace amounts of lead and cadmium. Incorporated bismuth powder in the composite electrode was electrochemically dissolved in 0.1M acetate buffer (pH 4.5) where nanosized bismuth particles were deposited on the glassy carbon at the reduction potential. The anodic stripping voltammetry on the Bi/C composite electrode exhibited well-defined, sharp and undistorted peaks with a favorable resolution for lead and cadmium. Comparing a non-oxidized Bi/C composite electrode with an in-situ plated bismuth film electrode, the Bi/C composite electrode exhibited superior performance due to its much larger surface area. The limit of detection was 0.41 microg/L for lead and 0.49 microg/L for cadmium. Based on this study, we are able to conclude that various types of composite electrodes for electroanalytical applications can be developed with a prudent combination of electrode materials.

  4. Microstructural Stability and Oxidation Resistance of 9-12 Chromium Steels at Elevated Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Dogan, O.N.; Alman, D.E.; Jablonski, P.D.; Hawk, J.A.

    2006-05-01

    Various martensitic 9-12 Cr steels are utilized currently in fossil fuel powered energy plants for their good elevated temperature properties such as creep strength, steam side oxidation resistance, fire side corrosion resistance, and thermal fatigue resistance. Need for further improvements on the properties of 9-12 Cr steels for higher temperature (>600oC) use is driven by the environmental concerns (i.e., improve efficiency to reduce emissions and fossil fuel consumption). In this paper, we will discuss the results of the research done to explore new subsitutional solute solution and precipitate hardening mechanisms for improved strength of 9-12 Cr martensitic steels. Stability of the phases present in the steels will be evaluated for various temperature and time exposures. A comparison of microstructural properties of the experimental steels and commercial steels will also be presented.

    The influence of a Ce surface treatment on oxidation behavior of a commercial (P91) and several experimental steels containing 9 to 12 weight percent Cr was examined at 650ºC in flowing dry and moist air. The oxidation behavior of all the alloys without the Ce modification was significantly degraded by the presence of moisture in the air during testing. For instance the weight gain for P91 was two orders of magnitude greater in moist air than in dry air. This was accompanied by a change in oxide scale from the formation of Cr-based scales in dry air to the formation of Fe-based scales in moist air. The Ce surface treatment was very effective in improving the oxidation resistance of the experimental steels in both moist and dry air. For instance, after exposure to moist air at 650ºC for 2000 hours, an experimental alloy with the cerium surface modification had a weight gain three orders of magnitude lower than the alloy without the Ce modification and two orders of magnitude lower than P91. The Ce surface treatment suppressed the formation of Fe-based scales and

  5. Liquid Bismuth Feed System for Electric Propulsion

    Science.gov (United States)

    Markusic, T. E.; Polzin, K. A.; Stanojev, B. J.

    2006-01-01

    Operation of Hall thrusters with bismuth propellant has been shown to be a promising path toward high-power, high-performance, long-lifetime electric propulsion for spaceflight missions. For example, the VHITAL project aims td accurately, experimentally assess the performance characteristics of 10 kW-class bismuth-fed Hall thrusters - in order to validate earlier results and resuscitate a promising technology that has been relatively dormant for about two decades. A critical element of these tests will be the precise metering of propellant to the thruster, since performance cannot be accurately assessed without an accurate accounting of mass flow rate. Earlier work used a pre/post-test propellant weighing scheme that did not provide any real-time measurement of mass flow rate while the thruster was firing, and makes subsequent performance calculations difficult. The motivation of the present work was to develop a precision liquid bismuth Propellant Management System (PMS) that provides real-time propellant mass flow rate measurement and control, enabling accurate thruster performance measurements. Additionally, our approach emphasizes the development of new liquid metal flow control components and, hence, will establish a basis for the future development of components for application in spaceflight. The design of various critical components in a bismuth PMS are described - reservoir, electromagnetic pump, hotspot flow sensor, and automated control system. Particular emphasis is given to material selection and high-temperature sealing techniques. Open loop calibration test results are reported, which validate the systems capability to deliver bismuth at mass flow rates ranging from 10 to 100 mg/sec with an uncertainty of less than +/- 5%. Results of integrated vaporizer/liquid PMS tests demonstrate all of the necessary elements of a complete bismuth feed system for electric propulsion.

  6. OXIDATIVE STABILITY OF CHILLED CHICKEN MEAT AFTER FEEDING OF SELECTED PLANTS

    Directory of Open Access Journals (Sweden)

    Mária Martonová

    2010-07-01

    Full Text Available  The effect of feeding of lemon balm (Melissa officinalis, L and combination of yarrow (Achillea millefolium L and hawthorn (Crataegus oxyacantha L on oxidative stability and sensory properties of produced poultry meat was investigated. Sixty one-day-old commercial broiler chicks (ROSS 308 were used in our experiment, divided into 3 groups, and fed 41 days, as follows: control (K was fed with standard diet without supplementation of plants; second group (M was fed with standard diet supplemented with grounded lemon balm in concentration 2 % per 1 kg; and third group was fed with standard diet supplemented with grounded yarrow (2 % and hawthorn (1 %. Results showed that supplementation with lemon balm, and mainly combination of yarrow and hawthorn in the diet significantly caused reduction of lipid oxidation processes in thigh meat during chilling storage of samples. In addition, supplementation of plants in the diet had positive effect on sensory quality of meat of broiler chickens.    doi:10.5219/38 

  7. Technological parameters and oxidative stability of irradiated wheat and corn flour

    International Nuclear Information System (INIS)

    Silva, Roberta Claro da

    2003-01-01

    Cereals are susceptible to the attack of insects and microorganisms development during storage. Researches have demonstrated the viability of the use of the irradiation technology for the preservation and reduction of these losses. The objective of this work was to evaluate the effect of different irradiation doses (0; 3; 4,5 and 6 kGy) on wheat and corn flour oxidative stability and technological quality. Physicochemical and sensory analyses were performed on the flours. The technological parameters evaluated on the wheat flour were farinogram, alveogram, falling number, and a baking experiment. The packed samples were irradiated in a commercial irradiator and stored under ambient conditions. The oxidative quality of both flours was not affected in any of the treatments, within the commercial shelf life period guaranteed by the manufacturers for non irradiated products. However, flours acid value was the analytical parameter that reflected the irradiation effect. The higher flour initial acid values were the larger the increments with storage. The 4.5 and 6 kGy treatments ha a negative effect on the technological quality of the wheat flour. The irradiated flours had their viscoelastic properties affected the higher the irradiation dose, the stronger the effect. None of the treatments affected the sensorial quality of the samples, although a metallic odor was perceived by some tasters. (author)

  8. Amorphous iron–chromium oxide nanoparticles with long-term stability

    Energy Technology Data Exchange (ETDEWEB)

    Iacob, Mihail [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Institute of Chemistry of ASM, Academiei str. 3, Chisinau 2028, Republic of Moldova (Moldova, Republic of); Cazacu, Maria, E-mail: mcazacu@icmpp.ro [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Turta, Constantin [Institute of Chemistry of ASM, Academiei str. 3, Chisinau 2028, Republic of Moldova (Moldova, Republic of); Doroftei, Florica [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Botko, Martin; Čižmár, Erik; Zeleňáková, Adriana; Feher, Alexander [Institute of Physics, Faculty of Science, P.J. Šafárik University, Park Angelinum 9, SK-04154 Košice (Slovakia)

    2015-05-15

    Highlights: • Fe–Cr oxide nanoparticles with pre-established metals ratio were obtained. • The amorphous state and its long-term stability were highlighted by X-ray diffraction. • The average diameter of dried nanoparticles was 3.5 nm, as was estimated by TEM, AFM. • In hexane dispersion, nanoparticles with diameter in the range 2.33–4.85 nm were found. • Superparamagnetic state of NPs co-exists with diamagnetism of the organic layer. - Abstract: Iron–chromium nanoparticles (NPs) were obtained through the thermal decomposition of μ{sub 3}-oxo heterotrinuclear (FeCr{sub 2}O) acetate in the presence of sunflower oil and dodecylamine (DA) as surfactants. The average diameter of the NPs was 3.5 nm, as estimated on the basis of transmission electron microscopy and atomic force microscopy images. Both techniques revealed the formation of roughly approximated spheres with some irregularities and agglomerations in larger spherical assemblies of 50–100 nm. In hexane, NPs with diameters in the 2.33–4.85 nm range are individually dispersed, as emphasized by dynamic light scattering measurements. The amorphous nature of the product was emphasized by X-ray powder diffraction. The study of the magnetic properties shows the presence of superparamagnetic state of iron–chromium oxide NPs and the diamagnetic contribution from DA layer forming a shell of NPs.

  9. Reactions of yttria-stabilized zirconia with oxides and sulfates of various elements

    Science.gov (United States)

    Zaplatynsky, I.

    1978-01-01

    The reactions between partially stabilized zirconia, containing 8 weight-percent yttria, and oxides and sulfates of various elements were studied at 1200, 1300, and 1400 C for times to 800, 400, and 200 hours, respectively. These oxides and sulfates represent impurities and additives potentially present in gas turbine fuels or impurities in the turbine combustion air as well as the elements of the substrate alloys in contact with zirconia. Based on the results, these compounds can be classified in four groups: (1) compounds which did not react with zirconia (Na2SO4, K2SO4, Cr2O3, Al2O3 and NiO); (2) compounds that reached completely with both zirconia phases (CaO, BaO, and BaSO4); (3) compounds that reacted preferentially with monoclinic zirconia (Na2O, K2O, CoO, Fe2O3, MgO, SiO2, and ZnO); and (4) compounds that reacted preferentially with cubic zirconia (V2O5, P2O5).

  10. Process Optimization for Biodiesel Production from Corn Oil and Its Oxidative Stability

    Directory of Open Access Journals (Sweden)

    N. El Boulifi

    2010-01-01

    Full Text Available Response surface methodology (RSM based on central composite design (CCD was used to optimize biodiesel production process from corn oil. The process variables, temperature and catalyst concentration were found to have significant influence on biodiesel yield. The optimum combination derived via RSM for high corn oil methyl ester yield (99.48% was found to be 1.18% wt catalyst concentration at a reaction temperature of 55.6∘C. To determine how long biodiesel can safely be stored, it is desirable to have a measurement for the stability of the biodiesel against such oxidation. Storage time and oxygen availability have been considered as possible factors influencing oxidative instability. Biodiesel from corn oil was stored for a period of 30 months, and the physico-chemical parameters of samples were measured at regular interval of time. Results show that the acid value (AV, peroxide value (PV, and viscosity (ν increased while the iodine value (IV decreased. These parameters changed very significantly when the sample was stored under normal oxygen atmosphere. However, the ν, AV, and IV of the biodiesel sample which was stored under argon atmosphere were within the limit by the European specifications (EN 14214.

  11. Effect of Ganoderma lucidum Powder on Oxidative Stability, Microbial and Sensory Properties of Emulsion Type Sausage.

    Science.gov (United States)

    Ghobadi, Runak; Mohammadi, Rasoul; Chabavizade, Javaher; Sami, Masoud

    2018-01-01

    Ganoderma lucidum from Ganodermataceae family is a kind of mushroom known to have various therapeutic properties such as lowering high blood sugar and high blood pressure, boosting the immune system as well as its antibacterial and antioxidant effects. this study investigated the oxidative stability, microbial and sensory properties of sausage at three different treatments; (i) 1% w/w Ganoderma lucidum powder (GLP) without nitrite as a food preservative (P), (ii) 0.5% w/w GLP with 80 ppm nitrite (N + P), and (iii) sausage with 120 ppm nitrate (N). Lipid oxidation was evaluated using peroxide value (PV) and thiobarbituric acid reactive species. Antimicrobial properties were assessed by total plate count (TPC), yeasts and molds, coliforms, Clostridium perfringens , and Staphylococcus aureus . Sensory assessment was evaluated by nine-point hedonic procedure. Samples in N + P treatment showed lower PV than other treatments at the storage period with no significant difference in 2-thiobarbituric acid (TBA) between N and N + P. The P group showed the highest TBA value ( P lucidum powder might be considered as a potential natural preservative for meat products.

  12. Oxidation stability of biodiesel fuels and blends using the Rancimat and PetroOXY methods. Effect of 4-allyl-2,6-dimethoxyphenol and catechol as biodiesel additives on oxidation stability

    Science.gov (United States)

    Botella, Lucía; Bimbela, Fernando; Martín, Lorena; Arauzo, Jesús; Sánchez, José L.

    2014-01-01

    In the present work, several fatty acid methyl esters (FAME) have been synthesized from various fatty acid feedstocks: used frying olive oil, pork fat, soybean, rapeseed, sunflower, and coconut. The oxidation stabilities of the biodiesel samples and of several blends have been measured simultaneously by both the Rancimat method, accepted by EN14112 standard, and the PetroOXY method, prEN16091 standard, with the aim of finding a correlation between both methodologies. Other biodiesel properties such as composition, cold filter plugging point (CFPP), flash point (FP), and kinematic viscosity have also been analyzed using standard methods in order to further characterize the biodiesel produced. In addition, the effect on the biodiesel properties of using 4-allyl-2,6-dimethoxyphenol and catechol as additives in biodiesel blends with rapeseed and with soybean has also been analyzed. The use of both antioxidants results in a considerable improvement in the oxidation stability of both types of biodiesel, especially using catechol. Adding catechol loads as low as 0.05% (m/m) in blends with soybean biodiesel and as low as 0.10% (m/m) in blends with rapeseed biodiesel is sufficient for the oxidation stabilities to comply with the restrictions established by the European EN14214 standard. An empirical linear equation is proposed to correlate the oxidation stability by the two methods, PetroOXY and Rancimat. It has been found that the presence of either catechol or 4-allyl-2,6-dimethoxyphenol as additives affects the correlation observed. PMID:25101258

  13. Hyperfine splitting in lithium-like bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Lochmann, Matthias; Froemmgen, Nadja; Hammen, Michael; Will, Elisa [Universitaet Mainz (Germany); Andelkovic, Zoran; Kuehl, Thomas; Litvinov, Yuri; Winters, Danyal; Sanchez, Rodolfo [GSI Helmholtzzentrum, Darmstadt (Germany); Botermann, Benjamin; Noertershaeuser, Wilfried [Technische Universitaet Darmstadt (Germany); Bussmann, Michael [Helmholtzzentrum Dresden-Rossendorf (Germany); Dax, Andreas [CERN, Genf (Switzerland); Hannen, Volker; Joehren, Raphael; Vollbrecht, Jonas; Weinheimer, Christian [Universitaet Muenster (Germany); Geppert, Christopher [Universitaet Mainz (Germany); GSI Helmholtzzentrum, Darmstadt (Germany); Stoehlker, Thomas [GSI Helmholtzzentrum, Darmstadt (Germany); Universitaet Heidelberg (Germany); Thompson, Richard [Imperial College, London (United Kingdom); Volotka, Andrey [Technische Universitaet Dresden (Germany); Wen, Weiqiang [IMP Lanzhou (China)

    2013-07-01

    High-precision measurements of the hyperfine splitting values on Li- and H-like bismuth ions, combined with precise atomic structure calculations allow us to test QED-effects in the regime of the strongest magnetic fields that are available in the laboratory. Performing laser spectroscopy at the experimental storage ring (ESR) at GSI Darmstadt, we have now succeeded in measuring the hyperfine splitting in Li-like bismuth. Probing this transition has not been easy because of its extremely low fluorescence rate. Details about this challenging experiment will be given and the achieved experimental accuracy are presented.

  14. Bismuth salicylate for diarrhea in children

    Science.gov (United States)

    Goldman, Ran D.

    2013-01-01

    Abstract Question Recently, I had a visit from a 5-year-old patient who had been given bismuth subsalicylate for a diarrheal illness by a local family physician during a trip to South America. Is this a practice we should encourage? Answer Research from developing countries has found the use of bismuth subsalicylate to be effective in shortening the duration of diarrheal illness. Despite these findings, its limited effectiveness and concerns about it potentially causing Reye syndrome, compliance, and cost are the key reasons it is not routinely recommended for children. PMID:23946025

  15. Analytical Characterization of Pure and Blended Watermelon (Citrullus lanatus oil: Impact of Blending on Oxidative Stability

    Directory of Open Access Journals (Sweden)

    Muhammad Waqar Azeem

    2015-06-01

    Full Text Available Analytical characterization of pure, blended watermelon (Citrulluslanatus oil and impact of blending on oxidative stability was investigated. Watermelon oil was added with mango (Mangiferaindica L. kernel oil at four different concentrations 5, 10, 15 and 20% (B1, B2, B3 and B4 and referenced with a control (100% watermelon oil. All the blends were stored in transparent PET bottles at ambient temperature (25-28oC for 3 months; storage stability was assessed at the interval of 1 month. Free fatty acid, unsaponifiable matter, saponification value, refractive index and iodine value of watermelon seed oil and mango kernel oil was 1.38%, 0.34%; 0.71%, 1.68%; 198, 193; 1.468, 1.457; 107.51, 54.62, respectively. The α tocopherol content of watermelon oil, mango kernel oil, B1, B2, B3 and B4 was 127.49, 205.44, 135.24, 144.52, 156.81 and 169.34 mg/kg. δ tocopherol in watermelon oil, mango kernel oil, B1, B2, B3 and B4 was 55.26, 34.81, 53.64, 51.27, 50.14 and 48.23 mg/kg. Concentration of linoleic acid decreased from 50.78% to 30.17% when 40% mango kernel oil was added to watermelon oil. Oleic acid increased from 22.89% in watermelon oil to 25.19%, 28.84% and 30.64% in B1, B2, B3 and B4. The increase in peroxide value of watermelon oil, B1, B2, B3 and B4 was 10.07, 9.56, 7.62, 5.17 and 2.87 (meqO2/kg in a time dependent manner. Induction period of pure watermelon oil was less than mango kernel oil and blends. These results suggest that chemical characteristics and oxidative stability of pure watermelon oil can be improved by blending with mango kernel oil.

  16. Analytical characterization of pure and blended watermelon (citrullus lanatus) oil: impact of blending on oxidative stability

    International Nuclear Information System (INIS)

    Azeem, M.W.; Nadeem, M.

    2015-01-01

    Analytical characterization of pure, blended watermelon (Citrulluslanatus) oil and impact of blending on oxidative stability was investigated. Watermelon oil was added with mango (Mangiferaindica L.) kernel oil at four different concentrations 5, 10, 15 and 20% (B 1, B2, B3 and B4) and referenced with a control (100% watermelon oil). All the blends were stored in transparent PET bottles at ambient temperature (25-28 degree C) for 3 months; storage stability was assessed at the interval of 1 month. Free fatty acid, unsaponifiable matter, saponification value, refractive index and iodine value of watermelon seed oil and mango kernel oil was 1.38%, 0.34%; 0.71%, 1.68%; 198, 193; 1.468, 1.457; 107.51, 54.62, respectively. The tocopherol content of watermelon oil, mango kernel oil, B1, B2, B3 and B4 was 127.49, 205.44, 135.24, 144.52, 156.81 and 169.34 mg/kg. delta tocopherol in watermelon oil, mango kernel oil, B1, B2, B3 and B4 was 55.26, 34.81, 53.64, 51.27, 50.14 and 48.23 mg/kg. Concentration of linoleic acid decreased from 50.78% to 30.17% when 40% mango kernel oil was added to watermelon oil. Oleic acid increased from 22.89% in watermelon oil to 25.19%, 28.84% and 30.64% in B1, B2, B3 and B4. The increase in peroxide value of watermelon oil, B1, B2, B3 and B4 was 10.07, 9.56, 7.62, 5.17 and 2.87 (meqO/sub 2//kg) in a time dependent manner. Induction period of pure watermelon oil was less than mango kernel oil and blends. These results suggest that chemical characteristics and oxidative stability of pure watermelon oil can be improved by blending with mango kernel oil. (author)

  17. Influence of surfactant composition on physical and oxidative stability of Quillaja saponin-stabilized lipid particles with encapsulated ω-3 fish oil.

    Science.gov (United States)

    Salminen, Hanna; Aulbach, Susanne; Leuenberger, Bruno H; Tedeschi, Concetta; Weiss, Jochen

    2014-10-01

    The purpose of this study was to investigate the potential of a saponin-rich extract of Quillaja saponaria to replace bile salts in the surfactant formulations for stabilization of nanostructured lipid carriers (NLC). The influence of Quillaja extract and/or high-melting lecithin at different concentrations on physical and oxidative stability was evaluated in (i) NLC containing tristearin and ω-3 fish oil, (ii) ω-3 fish oil-in-water emulsion, and (iii) solid lipid nanoparticles (SLN) containing tristearin. Best physical, polymorphic and oxidative stability of NLC were achieved with a surfactant combination of 2.4% (w/w) Quillaja extract and 0.6% (w/w) high-melting lecithin. The results showed that encapsulation of ω-3 fish oil into NLC inhibited the formation of lipid hydroperoxides, propanal and hexanal by 72, 53 and 57%, respectively, compared to the fish oil-in-water emulsion prepared with the same surfactants. This indicated that the low oxidation observed in NLC cannot be due to potential antioxidative effects of the surfactant combination itself. Evidence is accumulating that tristearin is able to form a protective shell around the ω-3 fish oil, when crystallization is induced via high-melting phospholipids in the solidified interfacial layer. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Freshwater dispersion stability of PAA-stabilised cerium oxide nanoparticles and toxicity towards Pseudokirchneriella subcapitata

    Energy Technology Data Exchange (ETDEWEB)

    Booth, Andy, E-mail: andy.booth@sintef.no [SINTEF Materials and Chemistry, Trondheim N-7465 (Norway); Størseth, Trond [SINTEF Materials and Chemistry, Trondheim N-7465 (Norway); Altin, Dag [BioTrix, Trondheim N-7022 (Norway); Fornara, Andrea; Ahniyaz, Anwar [German Federal Institute for Risk Assessment (BfR), Department of Product Safety, Berlin (Germany); Jungnickel, Harald; Laux, Peter; Luch, Andreas [SP Chemistry, Materials and Surfaces, Drottning Kristinas vag 45, SE-11686 Stockholm (Sweden); Sørensen, Lisbet [SINTEF Materials and Chemistry, Trondheim N-7465 (Norway)

    2015-02-01

    An aqueous dispersion of poly (acrylic acid)-stabilised cerium oxide (CeO{sub 2}) nanoparticles (PAA-CeO{sub 2}) was evaluated for its stability in a range of freshwater ecotoxicity media (MHRW, TG 201 and M7), with and without natural organic matter (NOM). In a 15 day dispersion stability study, PAA-CeO{sub 2} did not undergo significant aggregation in any media type. Zeta potential varied between media types and was influenced by PAA-CeO{sub 2} concentration, but remained constant over 15 days. NOM had no influence on PAA-CeO{sub 2} aggregation or zeta potential. The ecotoxicity of the PAA-CeO{sub 2} dispersion was investigated in 72 h algal growth inhibition tests using the freshwater microalgae Pseudokirchneriella subcapitata. PAA-CeO{sub 2} EC{sub 50} values for growth inhibition (GI; 0.024 mg/L) were 2–3 orders of magnitude lower than pristine CeO{sub 2} EC{sub 50} values reported in the literature. The concentration of dissolved cerium (Ce{sup 3+}/Ce{sup 4+}) in PAA-CeO{sub 2} exposure suspensions was very low, ranging between 0.5 and 5.6 μg/L. Free PAA concentration in the exposure solutions (0.0096–0.0384 mg/L) was significantly lower than the EC{sub 10} growth inhibition (47.7 mg/L) value of pure PAA, indicating that free PAA did not contribute to the observed toxicity. Elemental analysis indicated that up to 38% of the total Cerium becomes directly associated with the algal cells during the 72 h exposure. TOF-SIMS analysis of algal cell wall compounds indicated three different modes of action, including a significant oxidative stress response to PAA-CeO{sub 2} exposure. In contrast to pristine CeO{sub 2} nanoparticles, which rapidly aggregate in standard ecotoxicity media, PAA-stabilised CeO{sub 2} nanoparticles remain dispersed and available to water column species. Interaction of PAA with cell wall components, which could be responsible for the observed biomarker alterations, could not be excluded. This study indicates that the increased

  19. Bismuth Subgallate Toxicity in the Age of Online Supplement Use.

    Science.gov (United States)

    Sampognaro, Paul; Vo, Kathy T; Richie, Megan; Blanc, Paul D; Keenan, Kevin

    2017-11-01

    Bismuth salts have been used to treat gastroenterological disorders and are readily available over-the-counter and via the internet. Even though generally considered safe, bismuth compounds can cause a syndrome of subacute, progressive encephalopathy when taken in large quantities. We present the case of woman who developed progressive encephalopathy, aphasia, myoclonus, and gait instability after chronically ingesting large amounts of bismuth subgallate purchased from a major online marketing website to control symptoms of irritable bowel syndrome. After extensive neurological work-up, elevated bismuth levels in her blood, urine, and cerebrospinal fluid confirmed the diagnosis of bismuth-related neurotoxicity. She improved slowly following cessation of exposure. This case highlights bismuth subgallate as a neurotoxic bismuth formulation and reminds providers of the potential for safety misconceptions of positively reviewed online supplements.

  20. A scanning electron microscopy study of bismuth and phosphate phases in bismuth phosphate process waste at Hanford

    International Nuclear Information System (INIS)

    Reynolds, J.G.; Page, J.S.; Cooke, G.A.; John Pestovich

    2015-01-01

    This study characterizes major bismuth and phosphate-bearing phases in Hanford radioactive waste from the bismuth phosphate process using scanning electron microscopy with energy dispersive spectroscopy. Large bismuth phases displayed lath morphology and consisted of sodium, iron, bismuth, and phosphorus. The majority of the bismuth and phosphate observed was in small particulate (<2 µm in diameter) containing sodium, phosphorus, iron, and nickel. Additionally, phosphorus was included in a sodium-aluminum-phosphate lath-shaped species. Characterization of these waste types is of particular importance since they may have the bounding particle properties for designing waste mixing and transport processes used during treatment. (author)

  1. Influence of sintering parameters in the ferroelectric properties os strontium bismuth tantalate samples obtained by oxide mixture; Estudo da influencia dos parametros de sinterizacao nas propriedades ferroeletricas de amostras de tantalato de bismuto - estroncio obtidas por mistura de oxidos

    Energy Technology Data Exchange (ETDEWEB)

    Souza, R.R. de; Pereira, A.S.; Sousa, V.C., E-mail: ricson.souza@ufrgs.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil); Egea, J.R.J. [Instituto de Ceramica y Vidrio (ICV/CSIC), Madrid (Spain)

    2012-07-01

    The family of compounds layered-type perovskite, know as Aurivilius presents great alternative not only by the absence of lead in the composition, but because the polarization retention, replacing PZT in FeRAM devices. The strontium bismuth tantalate (SrBi{sub 2}Ta{sub 2}O{sub 9}) or SBT is ferroelectric material that has attracted considerable interest, since it has high fatigue resistance, supporting high hysteresis loops, with the change in polarization.Checking polarization and depolarization currents stimulated by temperature it is possible to obtain, for example, information about the nature of charges and about the activation energy for the process of dielectric relaxation. For analysis of ferroelectric properties of this compound, it is essential to obtain specimens with a relative density around 95%. Thus, it is important the optimization of the sintering process in order to obtain a ceramic body with a high densification. The influence of sintering parameters to obtain SrBi{sub 2}Ta{sub 2}O{sub 9} in the polarization properties and in the microstructure of sintered samples was investigated by thermostimulated currents and electronic microscopy, respectively. Results show that variation of these parameters may cause changes in the ferroelectric properties of the material. (author)

  2. Single- and double energy N{sup +} ion irradiated planar optical waveguides in Er: Tungsten–tellurite oxide glass and sillenite type Bismuth Germanate crystals working up to telecommunications wavelengths

    Energy Technology Data Exchange (ETDEWEB)

    Bányász, I., E-mail: banyasz@sunserv.kfki.hu [Department of Crystal Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Zolnai, Z.; Fried, M.; Lohner, T. [Research Institute for Technical Physics and Materials Science, Research Centre for Natural Sciences, Hungarian Academy of Sciences, P.O. Box 49, H-1525 Budapest (Hungary); Berneschi, S.; Righini, G.C. [MDF-Lab, “Nello Carrara” Institute of Applied Physics, IFAC-CNR, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); “Enrico Fermi” Center for Study and Research, Piazza del Viminale 2, 00184 Roma (Italy); Pelli, S.; Nunzi-Conti, G. [MDF-Lab, “Nello Carrara” Institute of Applied Physics, IFAC-CNR, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy)

    2013-07-15

    Ion implantation proved to be a universal technique for producing waveguides in most optical materials. Tellurite glasses are good hosts of rare-earth elements for the development of fibre and integrated optical amplifiers and lasers covering all the main telecommunication bands. Er{sup 3+}-doped tellurite glasses are good candidates for the fabrication of broadband amplifiers in wavelength division multiplexing around 1.55 μm, as they exhibit large stimulated cross sections and broad emission bandwidth. Fabrication of channel waveguides in such a material via N{sup +} ion implantation was reported recently. Sillenite type Bismuth Germanate (BGO) crystals are good nonlinear optical materials. Parameters of waveguide fabrication in both materials via implantation of MeV-energy N{sup +} ions were optimized. First single-energy implantations at 3.5 MeV at various fluences were applied. Waveguide operation up to 1.5 μm was observed in both materials. Then double-energy implantations at a fixed upper energy of 3.5 MeV and lower energies between 2.5 and 3.1 MeV were performed to suppress leaky modes by increasing barrier width. Improvement of waveguide characteristics was found by m-line spectroscopy and spectroscopic ellipsometry.

  3. Chemical composition, oxidative stability and antioxidant capacity of oil extracted from roasted seeds of Sacha-inchi (Plukenetia volubilis L.).

    Science.gov (United States)

    Cisneros, Fausto H; Paredes, Daniel; Arana, Adrian; Cisneros-Zevallos, Luis

    2014-06-04

    The effect of roasting of Sacha-inchi (Plukenetia volubilis L.) seeds on the oxidative stability and composition of its oil was investigated. The seeds were subjected to light, medium and high roasting intensities. Oil samples were subjected to high-temperature storage at 60 °C for 30 days and evaluated for oxidation (peroxide value and p-anisidine), antioxidant activity (total phenols and DPPH assay), and composition (tocopherol content and fatty acid profile). Results showed that roasting partially increased oil oxidation and its antioxidant capacity, slightly decreased tocopherol content, and did not affect the fatty acid profile. During storage, oxidation increased for all oil samples, but at a slower rate for oils from roasted seeds, likely due to its higher antioxidant capacity. Also, tocopherol content decreased significantly, and a slight modification of the fatty acid profile suggested that α-linolenic acid oxidized more readily than other fatty acids present.

  4. Brazing of Stainless Steel to Yttria-Stabilized Zirconia Using Gold-Based Brazes for Solid Oxide Fuel Cell Applications

    Science.gov (United States)

    Singh, M.; Shpargel, T. P.; Asthana, R.

    2007-01-01

    Two gold-base active metal brazes (gold-ABA and gold-ABA-V) were evaluated for oxidation resistance to 850 C, and used to join yttria-stabilized zirconia (YSZ) to a corrosion-resistant ferritic stainless steel for possible use in solid oxide fuel cells. Thermogravimetric analysis and optical microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy were used to evaluate the braze oxidation behavior, and microstructure and composition of the YSZ/braze/steel joints. Both gold-ABA and gold-ABA-V exhibited nearly linear oxidation kinetics at 850 C, with gold-ABA-V showing faster oxidation than gold-ABA. Both brazes produced metallurgically sound YSZ/steel joints due to chemical interactions of Ti and V with the YSZ and steel substrates.

  5. Oxidative Stability in Oil-in-Water Emulsions with Quercetin or Rutin Under Iron Catalysis or Riboflavin Photosensitization.

    Science.gov (United States)

    Yi, BoRa; Ka, HaeJung; Kwon, YongJun; Choi, HyungSeok; Kim, Sunghwa; Kim, Jisu; Kim, Mi-Ja; Lee, JaeHwan

    2017-04-01

    The effects of quercetin and rutin on the oxidative stability of oil-in-water (O/W) emulsions were tested under riboflavin (RF) photosensitization in the presence or absence of FeCl 2 . The degree of oxidation in O/W emulsions was determined by headspace oxygen content, conjugated dienes, and lipid hydroperoxides. Quercetin chelated more metal than did rutin in iron catalyzed O/W emulsions. Generally, 0.1 mM quercetin and rutin was oxidative while 0.5 and 1.0 mM quercetin and rutin was antioxidative in O/W emulsions under RF photosensitization. Depending on the analysis method, the antioxidants had different strengths. The antioxidative or oxidative properties of quercetin and rutin vary in O/W emulsions and depend the quercetin and rutin concentrations and oxidative forces like transition metals, RF photosensitization, or a combination thereof. © 2017 Institute of Food Technologists®.

  6. Catalytic Activity and Stability of Oxides: The Role of Near-Surface Atomic Structures and Compositions

    KAUST Repository

    Feng, Zhenxing

    2016-05-05

    δ oxide thin films, and the physical origin of segregation is discussed in comparison with (La1–ySry)2CoO4±δ/La1–xSrxCo0.2Fe0.8O3−δ. Sr enrichment in many electrocatalysts, such as La1–xSrxMO3−δ (M = Cr, Co, Mn, or Co and Fe) and Sm1–xSrxCoO3, has been probed using alternative techniques, including low energy ion scattering, secondary ion mass spectrometry, and X-ray fluorescence-based methods for depth-dependent, element-specific analysis. We highlight a strong connection between cation segregation and electrocatalytic properties, because cation segregation enhances oxygen transport and surface oxygen exchange kinetics. On the other hand, the formation of cation-enriched secondary phases can lead to the blocking of active sites, inhibiting oxygen exchange. With help from density functional theory, the links between cation migration, catalyst stability, and catalytic activity are provided, and the oxygen p-band center relative to the Fermi level can be identified as an activity descriptor. Based on these findings, we discuss strategies to increase a catalyst’s activity while maintaining stability to design efficient, cost-effective electrocatalysts.

  7. Effect of high-oxygen atmosphere packaging on oxidative stability and sensory quality of two chicken muscles during chill storage

    DEFF Research Database (Denmark)

    Jongberg, Sisse; Wen, Jinzhu; Tørngren, Mari Ann

    2014-01-01

    The oxidative stability and sensory quality of chicken breast (m. pectoralis) and thigh (m. peroneus longus) stored in high-oxygen modified atmosphere (MAP-O), non-oxygen modified atmosphere (MAP-N), or vacuum for up to 9 days at 5°C were investigated. Protein thiol concentration in breasts and t...

  8. Using Dark Field X-Ray Microscopy To Study In-Operando Yttria Stabilized Zirconia Electrolyte Supported Solid Oxide Cell

    DEFF Research Database (Denmark)

    Sierra, J. X.; Poulsen, H. F.; Jørgensen, P. S.

    Dark Field X-Ray Microscopy is a promising technique to study the structure of materials in nanometer length scale. In combination with x-ray diffraction technique, the microstructure evolution of Yttria Stabilized Zirconia electrolyte based solid oxide cell was studied running at extreme operati...

  9. Effect of light, packaging condition and dark storage durations on colour and lipid oxidative stability of cooked ham.

    Science.gov (United States)

    Haile, Demewez Moges; De Smet, Stefaan; Claeys, Erik; Vossen, Els

    2013-04-01

    The colour and lipid oxidative stability of sliced cooked ham stored at 4 °C were studied in relation to dark storage duration, lighting and packaging conditions. Colour stability was monitored by instrumental colour measurement (CIE L*a*b* colour space) whereas lipid stability was measured by the determination of the 2-thiobarbituric acid reactive substances (TBARS). A significantly higher discoloration observed in products wrapped in foil and kept in light than products wrapped in foil and kept in dark. Colour loss was estimated by loss of redness (a*), a*/b*, nitrosomyoglobin, chroma (C); or increase of lightness (L*), MetMb, hue angle (H°). Colour loss was more dependent upon photochemical process than dark storage duration and packaging types. Lipid oxidation was not significantly affected by light exposure. However lipid oxidation was significantly affected by dark storage duration as noticed from better lipid stability of products stored for short duration in dark. Better colour stability was observed on products packed in MAP with less residual oxygen.

  10. Oxidative stability of soybean oil added to coffee husk extract (Coffea arabica L. under accelerated storage conditions

    Directory of Open Access Journals (Sweden)

    Elisa Franco RIBEIRO

    Full Text Available Abstract Several plants have been studied as potential sources of natural antioxidants for use in the food industry, especially polyphenols. The aim of this study was to evaluate the effects of hydroalcoholic extract from coffee husk on the oxidative stability of soybean oil when stored in an oven. Samples were maintained at a temperature of 60 °C and their oxidative stability was evaluated once every 5 days for a period of 20 days through the Rancimat equipament and analysis of peroxide value, conjugated dienes and tocopherols retention. The oxidation rate in terms of mass gain was evaluated once every 24 hours for a period of 24 days. Although the antioxidant TBHQ showed a better efficiency in the inhibition of oxidation, coffee husk extract showed a synergistic effect when used with the synthetic, delaying the appearance of degradation products. In addition, the freeze-dried extract showed the ability to reduce the mass-gain rate when used alone as well as when used in combination with the synthetic antioxidant butyl hydroxyanisole (BHA, noting a synergistic effect on oxidative stability between the extract and the BHA. Therefore, coffee husk extract could be considered a source of natural antioxidants for synthetic antioxidants substitution.

  11. Inadvertent exaggerated anticoagulation following use of bismuth subsalicylate in an enterally fed patient receiving warfarin therapy.

    Science.gov (United States)

    Bingham, Angela L; Brown, Rex O; Dickerson, Roland N

    2013-12-01

    We report a case of an inadvertent increase in the international normalized ratio (INR) after the addition of bismuth subsalicylate for the treatment of diarrhea in an enterally fed patient receiving warfarin therapy. A 56-year-old Caucasian female presented to the trauma intensive care unit (ICU) with multiple lower extremity fractures. Warfarin was initiated for deep vein thrombosis prophylaxis due to the patient's inability to ambulate. The target INR was 2-3. Continuous intragastric enteral feeding was withheld 1 hour before and 1 hour after intragastric administration of warfarin. Bismuth subsalicylate 30 mL every 4 hours was prescribed for diarrhea. Within 3 days after starting bismuth subsalicylate therapy, the patient's INR increased from 2.56 to 3.54 and minor bleeding was noted from the patient's tracheostomy site. No significant change in warfarin dosage, variability in vitamin K intake, or medications that potentially alter warfarin metabolism were present during the unexpected rise in INR. When the bismuth subsalicylate was discontinued, the patient's INR stabilized into the target range on the same warfarin dose given at the time of the supratherapeutic INR. Salicylate displaces warfarin from plasma protein binding sites and may result in a significant increase in INR secondary to redistribution of warfarin to the free active form. Evaluation of this case report using the Drug Interaction Probability Scale and Naranjo Adverse Drug Reaction Probability Scale yielded scores consistent with a probable adverse drug interaction. Bismuth subsalicylate exaggerates warfarin's anticoagulant response and its concurrent use during warfarin therapy should be avoided.

  12. Magnetoreflection studies of ion implanted bismuth

    International Nuclear Information System (INIS)

    Nicolini, C.; Chieu, T.C.; Dresselhaus, M.S.; Massachusetts Inst. of Tech., Cambridge; Dresselhaus, G.

    1982-01-01

    The effect of the implantation of Sb ions on the electronic structure of the semimetal bismuth is studied by the magnetoreflection technique. The results show long electronic mean free paths and large implantation-induced increases in the band overlap and L-point band gap. These effects are opposite to those observed for Bi chemically doped with Sb. (author)

  13. On excitation of acoustic plasmons in bismuth

    International Nuclear Information System (INIS)

    Babkin, G.I.; Kravchenko, V.Ya.

    1977-01-01

    The amplitude of the transverse electromagnetic wave penetrating through a bismuth plate under conditions of existence of an acoustic plasma wave is calculated. Two wave coupling mechanisms due to the anisotropy of the carrier spectrum and the carrier drift in the magnetic field of the wave are considered. In the latter case, a wave of double frequency penetrates through the plate

  14. 21 CFR 73.2110 - Bismuth citrate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Bismuth citrate. 73.2110 Section 73.2110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR... paragraph (c)(1), effective April 27, 2010. For the convenience of the user, the revised text is set forth...

  15. Preparation and characterization of nanostructured copper bismuth ...

    Indian Academy of Sciences (India)

    Thin films of copper bismuth diselenide were prepared by chemical bath deposition technique onto glass substrate below 60°C. The deposition parameters such as time, temperature of deposition and pH of the solution, were optimized. The set of films having different elemental compositions was prepared by varying Cu/Bi ...

  16. Bismuth phosphates as intermediate temperature proton conductors

    DEFF Research Database (Denmark)

    Huang, Yunjie; Christensen, Erik; Shuai, Qin

    2017-01-01

    Proton conducting electrolyte materials operational in the intermediate temperature range of 200-400 °C are of special interest for applications in fuel cells and water electrolysers. Bismuth phosphates in forms of polycrystalline powders and amorphous glasses are synthesized and investigated...

  17. Photosensitive bismuth ions in lead tungstate

    Czech Academy of Sciences Publication Activity Database

    Vazhenin, V.A.; Potapov, A.P.; Asatryan, G.R.; Nikl, Martin

    2013-01-01

    Roč. 55, č. 4 (2013), s. 803-806 ISSN 1063-7834 Institutional support: RVO:68378271 Keywords : PbWO 4 * single crystal * bismuth * electron paramagnetic resonance Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.782, year: 2013

  18. Quantitative 3D Determination of Radiosensitization by Bismuth-Based Nanoparticles.

    Science.gov (United States)

    Alqathami, Mamdooh; Blencowe, Anton; Geso, Moshi; Ibbott, Geoffrey

    2016-03-01

    The nanoparticle-induced dose enhancement effect has been shown to improve the therapeutic efficacy of ionizing radiation in external beam radiotherapy. Whereas previous studies have focused on gold nanoparticles (AuNPs), no quantitative studies have been conducted to investigate the potential superiority of other high atomic number (Z) nanomaterials such as bismuth-based nanoparticles. The aims of this study were to experimentally validate and quantify the dose enhancement properties of commercially available bismuth-based nanoparticles (bismuth oxide (Bi2O3-NPs) and bismuth sulfide (Bi2S3-NPs)), and investigate their potential superiority over AuNPs in terms of radiation dose enhancement. Phantom cuvettes doped with and without nanoparticles where employed for measuring radiation dose enhancement produced from the interaction of radiation with metal nanoparticles. Novel 3D phantoms were employed to investigate the 3D spatial distribution of ionising radiation dose deposition. The phantoms were irradiated with kilovoltage and megavoltage X-ray beams and optical absorption changes were measured using a spectrophotometer and optical CT scanner. The radiation dose enhancement factors (DEFs) obtained for 50 nm diameter Bi2O3-NPs and AuNPs were 1.90 and 1.77, respectively, for 100 kV energy and a nanoparticle concentration of 0.5 mM. In addition, the DEFs of 5 nm diameter Bi2S3-NPs and AuNPs were determined to be 1.38 and 1.51, respectively, for 150 kV energy and a nanoparticle concentration of 0.25 mM. The results demonstrate that both bismuth-based nanoparticles can enhance the effects of radiation. For 6 MV energy the DEFs for all the investigated nanoparticles were lower (< 15%) than with kilovoltage energy.

  19. Chemical and Radiochemical Composition of Thermally Stabilized Plutonium Oxide from the Plutonium Finishing Plant Considered as Alternate Feedstock for the Mixed Oxide Fuel Fabrication Facility

    International Nuclear Information System (INIS)

    Tingey, Joel M.; Jones, Susan A.

    2005-01-01

    Eighteen plutonium oxide samples originating from the Plutonium Finishing Plant (PFP) on the Hanford Site were analyzed to provide additional data on the suitability of PFP thermally stabilized plutonium oxides and Rocky Flats oxides as alternate feedstock to the Mixed Oxide Fuel Fabrication Facility (MFFF). Radiochemical and chemical analyses were performed on fusions, acid leaches, and water leaches of these 18 samples. The results from these destructive analyses were compared with nondestructive analyses (NDA) performed at PFP and the acceptance criteria for the alternate feedstock. The plutonium oxide materials considered as alternate feedstock at Hanford originated from several different sources including Rocky Flats oxide, scrap from the Remote Mechanical C-Line (RMC) and the Plutonium Reclamation Facility (PRF), and materials from other plutonium conversion processes at Hanford. These materials were received at PFP as metals, oxides, and solutions. All of the material considered as alternate feedstock was converted to PuO2 and thermally stabilized by heating the PuO2 powder at 950 C in an oxidizing environment. The two samples from solutions were converted to PuO2 by precipitation with Mg(OH)2. The 18 plutonium oxide samples were grouped into four categories based on their origin. The Rocky Flats oxide was divided into two categories, low- and high-chloride Rocky Flats oxides. The other two categories were PRF/RMC scrap oxides, which included scrap from both process lines and oxides produced from solutions. The two solution samples came from samples that were being tested at Pacific Northwest National Laboratory because all of the plutonium oxide from solutions at PFP had already been processed and placed in 3013 containers. These samples originated at the PFP and are from plutonium nitrate product and double-pass filtrate solutions after they had been thermally stabilized. The other 16 samples originated from thermal stabilization batches before canning at

  20. Oxidative stability of chicken meat after propolis extract application in their diets

    Directory of Open Access Journals (Sweden)

    Marek Bobko

    2015-05-01

    Full Text Available In the experiment, the effect of the addition of propolis extract in a feed mixture for chicken broilers Hubbard JV on oxidative stability of breast and thigh muscles during refrigerated storage was investigated. In the experiment were included 90 pieces of one day-old chicks, which were divided into 3 groups (control, E1 and E2. Chickens were fed by ad libitum system until the age of 42 days. These feed mixtures were made without antibiotics preparation and coccidiostats.  Propolis extract in an amount of 150 mg.kg-1 (E1 and 450 mg.kg-1 (E2 was added into feed mixtures for experimental groups. During whole period of refrigerated storage were higher values of MDA determined in control group compare to experimental groups. The higher average MDA value determined in breast muscels of broiler chicken hybrid combination Hubbard JV was in samples of control group (0.157 mg.kg-1 compared to experimental groups E1 (0.140 mg.kg-1 and E2 (0.130 mg.kg-1 after 6-month of refrigerated storage. Significantly higher values of MDA were determined in control group compare to second experimental group from fourth month to the end of storage. The significantly lower value of MDA was determinated in first experimental group compare to control only at 6 month of storage. Trend of thigh muscle oxidation stability of chicken hybrid combination Hubbard JV was during 6 months of refrigerated storage similar than in breast muscle. The higher average MDA value determined in thigh muscels was in samples of control group (0.170 mg.kg-1 compared to experimental groups E1 (0.150 mg.kg-1 and E2 (0.139 mg.kg-1 after 6-month of refrigerated storage. Significantly higher values of MDA were determined in control group compare to second experimental group from fourth month to the end of storage. Higher amount of MDA in thigh muscle compare to breast muscle is due to by higher amount of fat occurred in thigh muscle. Normal 0 21 false false false SK X-NONE X-NONE

  1. Characteristics, Composition and Oxidative Stability of Lannea microcarpa Seed and Seed Oil

    Directory of Open Access Journals (Sweden)

    Patrice Bazongo

    2014-02-01

    Full Text Available The proximate composition of seeds and main physicochemical properties and thermal stability of oil extracted from Lannea microcarpa seeds were evaluated. The percentage composition of the seeds was: ash (3.11%, crude oil (64.90%, protein (21.14%, total carbohydrate (10.85% and moisture (3.24%. Physicochemical properties of the oil were: refractive index, 1.473; melting point, 22.60°C; saponification value, 194.23 mg of KOH/g of oil; iodine value, 61.33 g of I2/100 g of oil; acid value, 1.21 mg of KOH/g of oil; peroxide value, 1.48 meq of O2/kg of oil and oxidative stability index, 43.20 h. Oleic (43.45%, palmitic (34.45%, linoleic (11.20% and stearic (8.35% acids were the most dominant fatty acids. Triacylglycerols with equivalent carbon number (ECN 48 and ECN 46 were dominant (46.96% and 37.31%, respectively. The major triacylglycerol constituents were palmitoyl diolein (POO (21.23%, followed by dipalmitoyl olein (POP (16.47%, palmitoyl linoleyl olein (PLO (12.03%, dipalmitoyl linolein (PLP (10.85% and dioleoyl linolein (LOO (9.30%. The total polyphenol and tocopherol contents were 1.39 mg GAE g−1 DW and 578.56 ppm, respectively. γ-Tocopherol was the major tocopherol (437.23 ppm. These analytical results indicated that the L. microcarpa seed oil could be used as a frying oil and in the cosmetic industry.

  2. Individualization and Stabilization of Zinc Oxide Nanorods by Covalent Functionalization with Positively Charged Catechol Derivatives.

    Science.gov (United States)

    Burger, Alexandra; Srikantharajah, Rubitha; Peukert, Wolfgang; Hirsch, Andreas

    2017-12-06

    We present the formation of individualized and stabilized zinc oxide (ZnO) nanorods by functionalization with positively charged catechol derivatives by means of ligand exchange reactions. The electrosteric stabilization of ZnO nanorods was studied using two catechol derivatives, introducing either three (1) or six (2) pH independent positive charges per molecule and sterically demanding groups onto the surface. ZnO nanorods providing initially acetate (Ac) or 2-[2-(2-methoxyethoxy)-ethoxy]acetic acid (TODA) ligands on their surface were used. The ligand exchange was performed by using mono and mixed functionalization approaches, utilizing either exclusively the positively charged catechols or mixtures of the latter with small commercially available catechol derivatives, namely 4-methylcatechol (Me-cat), 4-tert-butylcatechol (tBu-cat), and dopamine hydrochloride (Dop). Using a combination of various analytical methods such as zeta potential, dynamic light scattering (DLS), UV/Vis, and scanning electron microscopy (SEM) measurements we found that the initial surfactants on the nanorods surface, the number of positive charges per molecule, the steric demand, and the added amount of the catechol derivative strongly influence the colloidal behavior of the nanorods. Stable suspensions containing individualized ZnO nanorods were successfully formed upon functionalization of ZnO-TODA nanorods with 30 monolayers (MLs) of the higher charged catechol (2), as well as using mixtures of 20/10 and 18/10 MLs of 2/Dop. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Study of the stability of the nanometer-sized oxides dispersed in ODS steels under ion irradiations

    International Nuclear Information System (INIS)

    Lescoat, M.-L.

    2012-01-01

    Oxide Dispersion Strengthened (ODS) Ferritic-Martensitic (FM) alloys are expected to play an important role as cladding materials in Generation IV sodium fast reactors operating in extreme temperature (400-500 C) and irradiation conditions (up to 200 dpa). Since nano-oxides give ODS steels their high temperature strength, the stability of these particles is an important issue. The present study evaluates the radiation response of nano-oxides by the use of in-situ and ex-situ ion irradiations performed on both Fe18Cr1W0,4Ti +0,3 Y 2 O 3 and Fe18Cr1W0,4Ti + 0.3 MgO ODS steels. In particular, the results showed that Y-Ti-O nano-oxides are quite stable under very high irradiation dose, namely 219 dpa at 500 C, and that the oxide interfacial structures are likely playing an important role on the behavior under irradiation (oxide stability and point defect recombination. (author) [fr

  4. Multifunctional gold coated iron oxide core-shell nanoparticles stabilized using thiolated sodium alginate for biomedical applications.

    Science.gov (United States)

    Sood, Ankur; Arora, Varun; Shah, Jyoti; Kotnala, R K; Jain, Tapan K

    2017-11-01

    In this paper we report synthesis of aqueous based gold coated iron oxide nanoparticles to integrate the localized surface plasma resonance (SPR) properties of gold and magnetic properties of iron oxide in a single system. Iron oxide-gold core shell nanoparticles were stabilized by attachment of thiolated sodium alginate to the surface of nanoparticles. Transmission electron microscope (TEM) micrograph presents an average elementary particle size of 8.1±2.1nm. High resolution TEM (HR-TEM) and X-ray photon spectroscopy further confirms the presence of gold shell around iron oxide core. Gold coating is responsible for reducing saturation magnetization (M s ) value from ~41emu/g to ~24emu/g - in thiolated sodium alginate stabilized gold coated iron oxide core-shell nanoparticles. The drug (curcumin) loading efficiency for the prepared nanocomposites was estimated to be around 7.2wt% (72μgdrug/mg nanoparticles) with encapsulation efficiency of 72.8%. Gold-coated iron oxide core-shell nanoparticles could be of immense importance in the field of targeted drug delivery along with capability to be used as contrast agent for MRI & CT. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Effect of Thymus vulgaris and Bunium persicum essential oils on the oxidative stability of virgin olive oil

    Directory of Open Access Journals (Sweden)

    M. Keramat

    2016-12-01

    Full Text Available Natural antioxidants are becoming a major focus because natural food ingredients are safer than synthetic types. The aim of this study was to investigate the protective effects of Thymus vulgaris and Bunium persicum essential oils (EO on the oxidation of virgin olive oil (VOO during accelerated storage. The antioxidant activities of EOs were compared with those of α-tocopherol and BHT. GC/MS analyses revealed that thymol (28.50%, p-cymene (27.14%, carvacrol (18.36%, and γ-terpinene (4.97% are the main components of T. vulgaris EO, while cuminaldehyde (32.81%, γ-terpinene (16.02% and p-cymene (14.07% are the main components of B. persicum EO. Both EOs provided protection for the VOO, inhibiting the formation of primary and secondary oxidation products although T. vulgaris EO showed greater protection against the oxidation process than B. persicum EO. The effect of T. vulgaris essential oil on the oxidation inhibition of VOO was similar to that of BHT. α-Tocopherol showed no measurable effect on improving the oxidative stability of VOO. This study suggests that T. vulgaris and B. persicum EOs can be used to improve the oxidative stability of VOO.

  6. Nanocomposites of cellulose/iron oxide: influence of synthesis conditions on their morphological behavior and thermal stability

    International Nuclear Information System (INIS)

    Ma Mingguo; Zhu Jiefang; Li Shuming; Jia Ning; Sun Runcang

    2012-01-01

    Nanocomposites of cellulose/iron oxide have been successfully prepared by hydrothermal method using cellulose solution and Fe(NO 3 ) 3 ·9H 2 O at 180 °C. The cellulose solution was obtained by the dissolution of microcrystalline cellulose in NaOH/urea aqueous solution, which is a good system to dissolve cellulose and favors the synthesis of iron oxide without needing any template or other reagents. The phases, microstructure, and morphologies of nanocomposites were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectra (EDS). The effects of the heating time, heating temperature, cellulose concentration, and ferric nitrate concentration on the morphological behavior of products were investigated. The experimental results indicated that the cellulose concentration played an important role in both the phase and shape of iron oxide in nanocomposites. Moreover, the nanocomposites synthesized by using different cellulose concentrations displayed different thermal stabilities. - Highlights: ► Nanocomposites of cellulose/iron oxide have been prepared by hydrothermal method. ► The cellulose concentration played an important role in the phase of iron oxide. ► The cellulose concentration played an important role in the shape of iron oxide. ► The samples displayed different thermal stabilities.

  7. Effect of Thymus vulgaris and Bunium persicum essential oils on the oxidative stability of virgin olive oil

    International Nuclear Information System (INIS)

    Keramat, M.; Golmakani, M.T.

    2016-01-01

    Natural antioxidants are becoming a major focus because natural food ingredients are safer than synthetic types. The aim of this study was to investigate the protective effects of Thymus vulgaris and Bunium persicum essential oils (EO) on the oxidation of virgin olive oil (VOO) during accelerated storage. The antioxidant activities of EOs were compared with those of α-tocopherol and BHT. GC/MS analyses revealed that thymol (28.50%), p-cymene (27.14%), carvacrol (18.36%), and γ-terpinene (4.97%) are the main components of T. vulgaris EO, while cuminaldehyde (32.81%), γ-terpinene (16.02%) and p-cymene (14.07%) are the main components of B. persicum EO. Both EOs provided protection for the VOO, inhibiting the formation of primary and secondary oxidation products although T. vulgaris EO showed greater protection against the oxidation process than B. persicum EO. The effect of T. vulgaris essential oil on the oxidation inhibition of VOO was similar to that of BHT. α-Tocopherol showed no measurable effect on improving the oxidative stability of VOO. This study suggests that T. vulgaris and B. persicum EOs can be used to improve the oxidative stability of VOO. [es

  8. Effect of Ganoderma lucidum Powder on Oxidative Stability, Microbial and Sensory Properties of Emulsion Type Sausage

    Directory of Open Access Journals (Sweden)

    Runak Ghobadi

    2018-01-01

    Full Text Available Background: Ganoderma lucidum from Ganodermataceae family is a kind of mushroom known to have various therapeutic properties such as lowering high blood sugar and high blood pressure, boosting the immune system as well as its antibacterial and antioxidant effects. Materials and Methods: this study investigated the oxidative stability, microbial and sensory properties of sausage at three different treatments; (i 1% w/w Ganoderma lucidum powder (GLP without nitrite as a food preservative (P, (ii 0.5% w/w GLP with 80 ppm nitrite (N + P, and (iii sausage with 120 ppm nitrate (N. Lipid oxidation was evaluated using peroxide value (PV and thiobarbituric acid reactive species. Antimicrobial properties were assessed by total plate count (TPC, yeasts and molds, coliforms, Clostridium perfringens, and Staphylococcus aureus. Sensory assessment was evaluated by nine-point hedonic procedure. Results: Samples in N + P treatment showed lower PV than other treatments at the storage period with no significant difference in 2-thiobarbituric acid (TBA between N and N + P. The P group showed the highest TBA value (P < 0.01. TPC remained below maximal permissible limit recommended by ISIRI during 30 days of storage in all sausage formulations (6.9798 log CFU. There was not found any coliforms bacteria, Clostridium perfringens, and S. aureus. The sensory evaluation indicated that there is no significant difference between samples in texture, taste, and smell. The color and overall acceptability of N group were higher and N + P group was closer to N group. Conclusion: The results suggest that G. lucidum powder might be considered as a potential natural preservative for meat products.

  9. The Controller Synthesis of Metastable Oxides Utilizing Epitaxy and Epitaxial Stabilization

    Energy Technology Data Exchange (ETDEWEB)

    Schlom, Darrell

    2003-12-02

    Molecular beam epitaxy (MBE) has achieved unparalleled control in the integration of semiconductors at the nanometer. These advances were made through the use of epitaxy, epitaxial stabilization, and a combination of composition-control techniques including adsorption-controlled growth and RHEED-based composition control that we have developed, understood, and utilized for the growth of oxides. Also key was extensive characterization (utilizing RHEED, four-circle x-ray diffraction, AFM, TEM, and electrical characterization techniques) in order to study growth modes, optimize growth conditions, and probe the structural, dielectric, and ferroelectric properties of the materials grown. The materials that we have successfully engineered include titanates (PbTiO3, Bi4Ti3O12), tantalates (SrBi2Ta2O9), and niobates (SrBi2Nb2O9); layered combinations of these perovskite-related materials (Bi4Ti3O12-SrTiO3 and Bi4Ti3O12-PbTiO3 Aurivillius phases and metastable PbTiO3/SrTiO3 and BaTiO3/SrTiO3 superlattices), and new metastable phases (Srn+1TinO3n+1 Ruddlesden-Popper phases). The films were grown by reactive MBE and pulsed laser deposition (PLD). Many of these materials are either new or have been synthesized with the highest perfection ever reported. The controlled synthesis of such layered oxide heterostructures offers great potential for tailoring the superconducting, ferroelectric, and dielectric properties of these materials. These properties are important for energy technologies.

  10. Stabilization

    Directory of Open Access Journals (Sweden)

    Muhammad H. Al-Malack

    2016-07-01

    Full Text Available Fuel oil flyash (FFA produced in power and water desalination plants firing crude oils in the Kingdom of Saudi Arabia is being disposed in landfills, which increases the burden on the environment, therefore, FFA utilization must be encouraged. In the current research, the effect of adding FFA on the engineering properties of two indigenous soils, namely sand and marl, was investigated. FFA was added at concentrations of 5%, 10% and 15% to both soils with and without the addition of Portland cement. Mixtures of the stabilized soils were thoroughly evaluated using compaction, California Bearing Ratio (CBR, unconfined compressive strength (USC and durability tests. Results of these tests indicated that stabilized sand mixtures could not attain the ACI strength requirements. However, marl was found to satisfy the ACI strength requirement when only 5% of FFA was added together with 5% of cement. When the FFA was increased to 10% and 15%, the mixture’s strength was found to decrease to values below the ACI requirements. Results of the Toxicity Characteristics Leaching Procedure (TCLP, which was performed on samples that passed the ACI requirements, indicated that FFA must be cautiously used in soil stabilization.

  11. Bismuth pyrochlore thin films for dielectric energy storage

    International Nuclear Information System (INIS)

    Michael, Elizabeth K.; Trolier-McKinstry, Susan

    2015-01-01

    Thin films of cubic pyrochlore bismuth zinc niobate, bismuth zinc tantalate, and bismuth zinc niobate tantalate were fabricated using chemical solution deposition. This family of materials exhibited moderate relative permittivities between 55 ± 2 and 145 ± 5 for bismuth zinc tantalate and bismuth zinc niobate, respectively, and low loss tangents on the order of 0.0008 ± 0.0001. Increases in the concentration of the tantalum end member increased the dielectric breakdown strength. For example, at 10 kHz, the room temperature breakdown strength of bismuth zinc niobate was 5.1 MV/cm, while that of bismuth zinc tantalate was 6.1 MV/cm. This combination of a high breakdown strength and a moderate permittivity led to a high discharged energy storage density for all film compositions. For example, at a measurement frequency of 10 kHz, bismuth zinc niobate exhibited a maximum recoverable energy storage density of 60.8 ± 2.0 J/cm 3 , while bismuth zinc tantalate exhibited a recoverable energy storage density of 60.7 ± 2.0 J/cm 3 . Intermediate compositions of bismuth zinc niobate tantalate offered higher energy storage densities; at 10 mol. % tantalum, the maximum recoverable energy storage density was ∼66.9 ± 2.4 J/cm 3

  12. A single cysteine post-translational oxidation suffices to compromise globular proteins kinetic stability and promote amyloid formation

    Directory of Open Access Journals (Sweden)

    Patrizia Marinelli

    2018-04-01

    Full Text Available Oxidatively modified forms of proteins accumulate during aging. Oxidized protein conformers might act as intermediates in the formation of amyloids in age-related disorders. However, it is not known whether this amyloidogenic conversion requires an extensive protein oxidative damage or it can be promoted just by a discrete, localized post-translational modification of certain residues. Here, we demonstrate that the irreversible oxidation of a single free Cys suffices to severely perturb the folding energy landscape of a stable globular protein, compromise its kinetic stability, and lead to the formation of amyloids under physiological conditions. Experiments and simulations converge to indicate that this specific oxidation-promoted protein aggregation requires only local unfolding. Indeed, a large scale analysis indicates that many cellular proteins are at risk of undergoing this kind of deleterious transition; explaining how oxidative stress can impact cell proteostasis and subsequently lead to the onset of pathological states. Keywords: Protein oxidation, Protein misfolding, Protein aggregation, Oxidative stress, Post-translational modification

  13. Study of tape casting of Yttria stabilized zirconia for apply in solid oxide fuel cell

    International Nuclear Information System (INIS)

    Santana, Leonardo de Paulo

    2008-01-01

    The hydrogen economy has been risen as new option for supply the growing global demand for energy. A fuel cell is an electrochemical device able to use hydrogen as a energy source. Carbon dioxide (CO 2 ) emission is very low so it is ecologically friendly, once energy is produced by a reaction of hydrogen and oxygen. The production of energy from hydrogen fuelled devices can be done even in small unities and in a distributed way. It can bring energy for isolated communities, where traditional energy distribution systems can not be reached. A fuel cell is composed essentially of 3 components: anode, cathode and the electrolyte. In present days, there are many materials proposed for use as electrolyte in fuel cells. Among then, Yttria stabilized zirconia (YSZ) is the most studied and effectively used in solid oxide fuel cell. Tape casting technology is a cheap, simple and efficient way to cast ceramics slurries in laminates thick enough to be used as components for fuel cells. Considering theses aspects, in this work, ceramic thin film forming was studied using tape casting technology with raw materials prepared from Brazilian zircon ores. It is described in literature that ceramic slurries are generally made from powders with low surface area (often between 0,5 to 10m 2 /g), and the powders used in this study had larger surface area (often between 40 to 80m 2 /g). The use of zeta potential is indicated to study the stability of a suspension of ceramic powders. However, for suspensions with large concentration of solid, it is also necessary to determine the flow curve, because in these conditions, the double electric layer formed during the stabilization of suspensions can be compressed. In the rheological properties study, calcined ceramic powders were classified using a set of ABNT series screens and separated and retained by the de mesh 60 screen. Flow curve of suspension was determined in aqueous suspensions of these powders. For tape casting processing, a binder

  14. Textural, Rheological and Sensory Properties and Oxidative Stability of Nut Spreads—A Review

    Directory of Open Access Journals (Sweden)

    Hasanah Mohd Ghazali

    2013-02-01

    Full Text Available Tree nuts are rich in macro and micronutrients, phytochemicals, tocopherols and phenolic compounds. The development of nut spreads would potentially increase the food uses of nuts and introduce consumers with a healthier, non-animal breakfast snack food. Nut spreads are spreadable products made from nuts that are ground into paste. Roasting and milling (particle size reduction are two important stages for the production of nut spreads that affected the textural, rheological characteristic and overall quality of the nut spread. Textural, color, and flavor properties of nut spreads play a major role in consumer appeal, buying decisions and eventual consumption. Stability of nut spreads is influenced by its particle size. Proper combination of ingredients (nut paste, sweetener, vegetable oil and protein sources is also required to ensure a stable nut spread product is produced. Most of the nut spreads behaved like a non-Newtonian pseudo-plastic fluid under yield stress which help the producers how to start pumping and stirring of the nut spreads. Similar to other high oil content products, nut spreads are susceptible to autoxidation. Their oxidation can be controlled by application of antioxidants, using processing techniques that minimize tocopherol and other natural antioxidant losses.

  15. Textural, Rheological and Sensory Properties and Oxidative Stability of Nut Spreads—A Review

    Science.gov (United States)

    Shakerardekani, Ahmad; Karim, Roselina; Ghazali, Hasanah Mohd; Chin, Nyuk Ling

    2013-01-01

    Tree nuts are rich in macro and micronutrients, phytochemicals, tocopherols and phenolic compounds. The development of nut spreads would potentially increase the food uses of nuts and introduce consumers with a healthier, non-animal breakfast snack food. Nut spreads are spreadable products made from nuts that are ground into paste. Roasting and milling (particle size reduction) are two important stages for the production of nut spreads that affected the textural, rheological characteristic and overall quality of the nut spread. Textural, color, and flavor properties of nut spreads play a major role in consumer appeal, buying decisions and eventual consumption. Stability of nut spreads is influenced by its particle size. Proper combination of ingredients (nut paste, sweetener, vegetable oil and protein sources) is also required to ensure a stable nut spread product is produced. Most of the nut spreads behaved like a non-Newtonian pseudo-plastic fluid under yield stress which help the producers how to start pumping and stirring of the nut spreads. Similar to other high oil content products, nut spreads are susceptible to autoxidation. Their oxidation can be controlled by application of antioxidants, using processing techniques that minimize tocopherol and other natural antioxidant losses. PMID:23429239

  16. Encapsulation of fish oil in nanofibers by emulsion electrospinning: Physical characterization and oxidative stability

    DEFF Research Database (Denmark)

    García Moreno, Pedro Jesús; Boutrup Stephansen, Karen; van derKruijs, Jules

    2016-01-01

    The encapsulation of fish oil in poly(vinyl alcohol) (PVA) nanofibers by emulsion electrospinning was investigated. Independently of the emulsifier used, whey protein isolate (WPI) or fish protein hydrolysate (FPH), PVA concentration had a high influence on fiber morphology. Fibers without bead d...... presented a higher content of hydroperoxides and secondary oxidation products (e.g. 1-penten-3-ol, hexanal, octanal and nonanal) compared to emulsified and unprotected fish oil....... defects were only produced for solutions with 10.5% (w/w) PVA, which presented sufficient number of polymer chain entanglements. On the other hand, increasing oil load from 1.5 to 3% (w/w) resulted in fibers with larger diameters containing spindle-like enlargements interspersed. High omega-3...... encapsulation efficiency (92.4 ± 2.3%) was obtained for fibers produced from 10.5% (w/w) PVA-5% (w/w) emulsion blend stabilized with WPI, resulting in an oil load capacity of 11.3 ± 0.3%. Moreover, the encapsulated oil was randomly distributed as small droplets inside the fibers. However, the electrospun fibers...

  17. Oxidative stability and quality characteristics of whey protein coated rohu (Labeo rohita) fillets.

    Science.gov (United States)

    Khan, Muhammad Issa; Adrees, Muhammad Nawaz; Arshad, Muhammad Sajid; Anjum, Faqir Muhammad; Jo, Cheorun; Sameen, Aysha

    2015-06-23

    Edible coatings have beneficial effect on quality of fish and act as barrier against moisture transfer and uptake of oxygen. Edible coating made up of biodegradable materials is helpful to control the quality deterioration and enhance the shelf life. The present study was designed to elucidate the effects of whey based protein using two plasticizers i.e. sorbitol and glycerol on oxidative stability and quality characteristics of Rohu (Labeo rohita). Coating solutions were prepared by incorporating whey (8% protein; w/ w) in distilled water followed addition of sorbitol and glycerol. Dipping method was used to apply coating on fish fillets. The coated fillets were subjected to quality characteristics, pH, color, TBARS, peroxide value, volatile basic nitrogen (TVBN) and sensory evaluation during 40 days of storage. The results showed significant impact on different quality attributes of fish fillets. Highest (TVBN) and TBARS were observed in control samples (T0) (12.60 ± 0.25, mg/100 g, 0.820 ± 0.02 mg MDA/kg) while lowest in T3 coated samples (8.81 ± 0.18 mg/100 g., 0.352 ± 0.01 mg MDA/kg of meat). Moreover, sensorial findings did not showed adverse effects and T3 coated samples were ranked higher by consumers. In conclusion, coating fish with Whey: Glycerol: Sorbitol (1:1:1) in current investigation enhances the storage life and quality of fish fillets.

  18. Thermal stability of atomic layer deposited WCxNy electrodes for metal oxide semiconductor devices

    Science.gov (United States)

    Zonensain, Oren; Fadida, Sivan; Fisher, Ilanit; Gao, Juwen; Danek, Michal; Eizenberg, Moshe

    2018-01-01

    This study is a thorough investigation of the chemical, structural, and electrical stability of W based organo-metallic films, grown by atomic layer deposition, for future use as gate electrodes in advanced metal oxide semiconductor structures. In an earlier work, we have shown that high effective work-function (4.7 eV) was produced by nitrogen enriched films (WCxNy) dominated by W-N chemical bonding, and low effective work-function (4.2 eV) was produced by hydrogen plasma resulting in WCx films dominated by W-C chemical bonding. In the current work, we observe, using x-ray diffraction analysis, phase transformation of the tungsten carbide and tungsten nitride phases after 900 °C annealing to the cubic tungsten phase. Nitrogen diffusion is also observed and is analyzed with time-of-flight secondary ion mass spectroscopy. After this 900 °C anneal, WCxNy effective work function tunability is lost and effective work-function values of 4.7-4.8 eV are measured, similar to stable effective work function values measured for PVD TiN up to 900 °C anneal. All the observed changes after annealing are discussed and correlated to the observed change in the effective work function.

  19. Improvement of the Physical and Oxidative Stability Characteristics of Ice Cream through Interesterified Moringa Oleifera Oil

    International Nuclear Information System (INIS)

    Nadeem, M.; Ullah, R.; Ullah, A.

    2016-01-01

    This study aimed to investigate the effect of high melting point interesterified M. oleifera oil (35.6 degree centigrade) with substantial amount of unsaturated fatty acids on physicochemical and oxidative stability characteristics of ice cream. Of the 10 percent fat in the ice cream, 30 percent was replaced by interesterified M. oleifera oil at three levels i.e. 10, 20 and 30 percent (T1, T2 and T3, respectively). Oleic acid increased from 26.55 percent to 31.69 percent, 36.94 percent and 42.15 percent in T1, T2 and T3 with no effect on melting time, compositional attributes and free fatty acid content of ice cream (P>0.05). Supplementation of ice cream with interesterified M. oleifera oil inhibited the autoxidation process in ice cream during 3 months storage period (P<0.05).The loss of oleic and linoleic acid in fresh and 3 months stored control and T2 was 26.55 percent, 24.15 percent, 26.39% percent and 1.93 percent, 1.24 percent and 1.79 percent, respectively. Peroxide value of three months stored control and T3 was 1.12 and 0.39 (meqO2/kg). The overall acceptability score of T2 was 80% of the total score (9). (author)

  20. Adsorption of volatile polonium and bismuth species on metals in various gas atmospheres. Pt. I. Adsorption of volatile polonium and bismuth on gold

    Energy Technology Data Exchange (ETDEWEB)

    Maugeri, Emilio Andrea; Neuhausen, Joerg; Dressler, Rugard; Piguet, David; Voegele, Alexander; Schumann, Dorothea [Paul Scherrer Institut (PSI), Villigen (Switzerland). Lab. for Radiochemistry; Eichler, Robert [Paul Scherrer Institut (PSI), Villigen (Switzerland). Lab. for Radiochemistry; Bern Univ. (Switzerland). Dept. for Chemistry and Biochemistry; Rijpstra, Kim [Ghent Univ., Zwijnaarde (Belgium). Center for Molecular Modeling (CMM); Cottenier, Stefaan [Ghent Univ., Zwijnaarde (Belgium). Center for Molecular Modeling (CMM); Ghent Univ., Zwijnaarde (Belgium). Dept. of Materials Science and Engineering

    2016-07-01

    Polonium isotopes are considered the most hazardous radionuclides produced during the operation of accelerator driven systems (ADS) when lead-bismuth eutectic (LBE) is used as the reactor coolant and as the spallation target material. In this work the use of gold surfaces for capturing polonium from the cover gas of the ADS reactor was studied by thermochromatography. The results show that gaseous monoatomic polonium, formed in dry hydrogen, is adsorbed on gold at 1058 K. Its adsorption enthalpy was calculated as -250±7 kJ mol{sup -1}, using a Monte Carlo simulation code. Highly volatile polonium species that were observed in similar experiments in fused silica columns in the presence of moisture in both inert and reducing gas were not detected in the experiments studying adsorption on gold surfaces. PoO{sub 2} is formed in both dry and moist oxygen, and its interaction with gold is characterized by transport reactions. The interaction of bismuth, present in large amounts in the atmosphere of the ADS, with gold was also evaluated. It was found that bismuth has a higher affinity for gold, compared to polonium, in an inert, reducing, and oxidizing atmosphere. This fact must be considered when using gold as a material for filtering polonium in the cover gas of ADS.

  1. Antioxidant Effect on Oxidation Stability of Blend Fish Oil Biodiesel with Vegetable Oil Biodiesel and Petroleum Diesel Fuel

    Directory of Open Access Journals (Sweden)

    M. Hossain

    2013-06-01

    Full Text Available Two different phenolic synthetic antioxidants were used to improve the oxidation stability of fish oil biodiesel blends with vegetable oil biodiesel and petroleum diesel. Butylhydroxytoluene (BHT most effective for improvement of the oxidation stability of petro diesel, whereas  tert-butylhydroquinone (TBHQ showed good performance in fish oil biodiesel. Fish oil/Rapeseed oil biodiesel mixed showed some acceptable results in higher concentration ofantioxidants. TBHQ showed better oxidation stability than BHT in B100 composition. In fish oil biodiesel/diesel mixed fuel, BHT was more effective antioxidant than TBHQ to increase oxidationstability because BHT is more soluble than TBHQ. The stability behavior of biodiesel/diesel blends with the employment of the modified Rancimat method (EN 15751. The performance ofantioxidants was evaluated for treating fish oil biodiesel/Rapeseed oil biodiesel for B100, and blends with two type diesel fuel (deep sulfurization diesel and automotive ultra-low sulfur or zero sulfur diesels. The examined blends were in proportions of 5, 10, 15, and 20% by volume of fish oilbiodiesel.

  2. Homoleptic Ce(III) and Ce(IV) Nitroxide Complexes: Significant Stabilization of the 4+ Oxidation State

    Energy Technology Data Exchange (ETDEWEB)

    Bogart, Justin A.; Lewis, Andrew J.; Medling, Scott A.; Piro, Nicholas A.; Carroll, Patrick J.; Booth, Corwin H.; Schelter, Eric J.

    2014-06-25

    Electrochemical experiments performed on the complex Ce-IV[2-((BuNO)-Bu-t)py](4), where [2-((BuNO)-Bu-t)py](-) = N-tert-butyl-N-2-pyridylnitroxide, indicate a 2.51 V stabilization of the 4+ oxidation state of Ce compared to [(Bu4N)-Bu-n](2)[Ce(NO3)(6)] in acetonitrile and a 2.95 V stabilization compared to the standard potential for the ion under aqueous conditions. Density functional theory calculations suggest that this preference for the higher oxidation state is a result of the tetrakis(nitroxide) ligand framework at the Ce cation, which allows for effective electron donation into, and partial covalent overlap with, vacant 4f orbitals with delta symmetry. The results speak to the behavior of CeO2 and related solid solutions in oxygen uptake and transport applications, in particular an inherent local character of bonding that stabilizes the 4+ oxidation state. The results indicate a cerium(IV) complex that has been stabilized to an unprecedented degree through tuning of its ligand-field environment.

  3. Analysis of cerium-composite polymer-electrolyte membranes during and after accelerated oxidative-stability test

    Science.gov (United States)

    Shin, Dongwon; Han, Myungseong; Shul, Yong-Gun; Lee, Hyejin; Bae, Byungchan

    2018-02-01

    The oxidative stability of membranes constructed from a composite of pristine sulfonated poly(arylene ether sulfone) and cerium was investigated by conducting an accelerated oxidative-stability test at the open-circuit voltage (OCV). The membranes were analyzed in situ through OCV and impedance measurements, cyclic voltammetry, and linear-sweep voltammetry to monitor the electrochemical properties during the stability test. Although the high-frequency resistance of a composite membrane was slightly higher than that of a pristine membrane because of the exchange of protons from the sulfonic acid with cerium ions, the composite membrane maintained its potential for much longer than the pristine membrane. The effect of the cerium ions as radical scavengers was confirmed by analyzing the drain water and chemical structure after operation. These post-operation analyses confirmed that cerium ions improved the oxidative stability of the hydrocarbon-based polymer during fuel-cell operation. It is clear that the cerium-based radical scavengers prevented chemical degradation of the polymer membrane as well as the electrode in terms of hydrogen cross-over, polymer-chain scission, and the electrochemical surface area, while they rarely diffused outward from the membrane.

  4. Band structure and phase stability of the copper oxides Cu2O, CuO, and Cu4O3

    Science.gov (United States)

    Heinemann, Markus; Eifert, Bianca; Heiliger, Christian

    2013-03-01

    The p-type semiconductor copper oxide has three distinct phases Cu2O, CuO, and Cu4O3 with different morphologies and oxidation states of the copper ions. We investigate the structural stability and electronic band structure of all three copper oxide compounds using ab initio methods within the framework of density functional theory and consider different exchange correlation functionals. While the local density approximation (LDA) fails to describe the semiconducting states of CuO and Cu4O3, the LDA+U and HSE06 hybrid functional describe both compounds as indirect semiconductors. Using the HSE06 hybrid functional we calculate the electronic band structure in the full Brillouin zone for all three copper oxide compounds.

  5. Oxidative Stability of Granola Bars Enriched with Multilayered Fish Oil Emulsion in the Presence of Novel Brown Seaweed Based Antioxidants.

    Science.gov (United States)

    Hermund, Ditte B; Karadağ, Ayşe; Andersen, Ulf; Jónsdóttir, Rósa; Kristinsson, Hordur G; Alasalvar, Cesarettin; Jacobsen, Charlotte

    2016-11-09

    Fucus vesiculosus extracts that have both radical scavenging activity and metal chelating ability in vitro were used as natural antioxidant in granola bars enriched with fish oil emulsion by using primary and secondary emulsion systems stabilized by sodium caseinate alone and sodium caseinate-chitosan. The bars were stored at 20 °C and evaluated over a period of 10 weeks by measuring the development of primary and secondary oxidation products. The samples prepared with secondary emulsion system developed less oxidation products probably due to increased interfacial layer thickness that would act as a barrier to the penetration and diffusion of molecular species that promote oxidation. The positive charge of oil droplets in the secondary emulsion may also inhibit iron-lipid interaction through electrostatic repulsion. Additional protection against lipid oxidation was obtained when fish oil emulsions were added to the granola bars especially in combination with acetone and ethanol extracts of Fucus vesiculosus.

  6. Effects of Chia (Salvia hispanica L. seed supplementation on rabbit meat quality, oxidative stability and sensory traits

    Directory of Open Access Journals (Sweden)

    Paolo Cornale

    2010-02-01

    Full Text Available Chia (Salvia hispanica L. seed (SHS dietary supplementation is effective in improving the nutritional quality of rabbit meat for consumers and could contribute to the novel concept of “functional food” in human nutrition. A trial has been conducted in order to verify the effects of three levels (0, 10, or 15% of SHS inclusion in a rabbit diet on the meat quality, oxidative stability and sensory traits. The dietary treatment did not induce any differences in the ultimate pH, chemical composition, drip losses of the longissimus dorsi muscle or the initial and ultimate pH of the biceps femoris muscle, but the SHS supplementation increased cooking losses of the rabbit meat. The inclusion of SHS also reduced oxidative stability during meat storage. No adverse effects were observed on the meat quality or customer acceptability. The inclusion of SHS in rabbit diets, which is effective in improving the n-3 polyunsaturated fatty acids content of meat, increased the lipid oxidation in the hind leg meat. An improvement in tissue oxidative stability could be obtained by feeding rabbits with higher levels of antioxidants.

  7. Parametric study on the stabilization of metal oxide nanoparticles in organic solvents: A case study with indium tin oxide (ITO) and heptane.

    Science.gov (United States)

    Almansoori, Zayed; Khorshidi, Behnam; Sadri, Behnam; Sadrzadeh, Mohtada

    2018-01-01

    The tendency of nanoparticles (NPs) to form large aggregates has been a major limitation to their widespread applications where utilizing monodisperse and stable suspension of NPs is essential. The aggregation of NPs becomes more challenging when there is less affinity between the dispersed phase (NPs) and the continuous phase (solvent), such as, dispersion of hydrophilic metal oxide NPs into a nonpolar (organic) solvent. The objective of this study is to systematically investigate the synergistic effects of eight dispersion parameters on the size and stability of indium tin oxide (ITO) NPs in heptane. The matrix of experimentation was designed using an L 18 Taguchi method. The analysis of variance (ANOVA) of the experimental results revealed that the most significant factors on the size and stability of NPs were the mass of ITO NPs and the volume of the dispersing agent. Taguchi signal-to-noise (SN) ratio analysis was used to determine the optimal factor levels for the preparation of well-dispersed and stable NP suspensions. Confirmation tests were carried out at the suggested levels of the ANOVA predictive model, and highly stable ITO NPs in heptane with the size distribution of 43.0-68.3nm were obtained. The results of the present parametric study can be used for a broad range of applications where effective stabilization of metal oxide NPs in organic solvents is desired. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Structural Dynamics and Evolution of Bismuth Electrodes during Electrochemical Reduction of CO 2 in Imidazolium-Based Ionic Liquid Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Medina-Ramos, Jonnathan [Chemical; Lee, Sang Soo [Chemical; Fister, Timothy T. [Chemical; Hubaud, Aude A. [Chemical; Sacci, Robert L.; Mullins, David R.; DiMeglio, John L. [Department; Pupillo, Rachel C. [Department; Velardo, Stephanie M. [Department; Lutterman, Daniel A.; Rosenthal, Joel [Department; Fenter, Paul [Chemical

    2017-09-14

    Real-time changes in the composition and structure of bismuth electrodes used for catalytic conversion of CO2 into CO were examined via X-ray absorption spectroscopy (including XANES and EXAFS), electrochemical quartz crystal microbalance (EQCM), and in situ X-ray reflectivity (XR). Measurements were performed with bismuth electrodes immersed in acetonitrile (MeCN) solutions containing a 1-butyl-3-methylimidazolium ([BMIM]+) ionic liquid promoter or electrochemically inactive tetrabutylammonium supporting electrolytes (TBAPF6 and TBAOTf). Altogether, these measurements show that bismuth electrodes are originally a mixture of bismuth oxides (including Bi2O3) and metallic bismuth (Bi0) and that the reduction of oxidized bismuth species to Bi0 is fully achieved under potentials at which CO2 activation takes place. Furthermore, EQCM measurements conducted during cyclic voltammetry revealed that a bismuth-coated quartz crystal exhibits significant shifts in resistance (ΔR) prior to the onset of CO2 reduction near -1.75 V vs Ag/AgCl and pronounced hysteresis in frequency (Δf) and ΔR, which suggests significant changes in roughness or viscosity at the Bi/[BMIM]+ solution interface. In situ XR performed on rhombohedral Bi (001) oriented films indicates that extensive restructuring of the bismuth film cathodes takes place upon polarization to potentials more negative than -1.6 V vs Ag/AgCl, which is characterized by a decrease of the Bi (001) Bragg peak intensity of ≥50% in [BMIM]OTf solutions in the presence and absence of CO2. Over 90% of the reflectivity is recovered during the anodic half-scan, suggesting that the structural changes are mostly reversible. In contrast, such a phenomenon is not observed for thin Bi (001) oriented films in solutions of tetrabutylammonium salts that do not promote CO2 reduction. Overall, these results highlight that Bi electrodes undergo significant potential-dependent chemical and structural transformations in the presence of [BMIM

  9. Current and potential applications of bismuth-based drugs.

    Science.gov (United States)

    Keogan, Donal M; Griffith, Darren M

    2014-09-23

    : Bismuth compounds have been used extensively as medicines and in particular for the treatment of gastrointestinal ailments. In addition to bismuth's well known gastroprotective effects and efficacy in treating H. pylori infection it also has broad anti-microbial, anti-leishmanial and anti-cancer properties. Aspects of the biological chemistry of bismuth are discussed and biomolecular targets associated with bismuth treatment are highlighted. This review strives to provide the reader with an up to date account of bismuth-based drugs currently used to treat patients and discuss potential medicinal applications of bismuth drugs with reference to recent developments in the literature. Ultimately this review aims to encourage original contributions to this exciting and important field.

  10. Enhancement of the chemical stability in confined δ-Bi2O3

    DEFF Research Database (Denmark)

    Sanna, Simone; Esposito, Vincenzo; Andreasen, Jens Wenzel

    2015-01-01

    Bismuth-oxide-based materials are the building blocks for modern ferroelectrics1, multiferroics2, gas sensors3, light photocatalysts4 and fuel cells5,6. Although the cubic fluorite δ-phase of bismuth oxide (δ-Bi2O3) exhibits the highest conductivity of known solid-state oxygen ion conductors5, its...... instability prevents use at low temperature7–10. Here we demonstrate the possibility of stabilizing δ-Bi2O3 using highly coherent interfaces of alternating layers of Er2O3-stabilized δ-Bi2O3 and Gd2O3-doped CeO2. Remarkably, an exceptionally high chemical stability in reducing conditions and redox cycles...... at high temperature, usually unattainable for Bi2O3-based materials, is achieved. Even more interestingly, at low oxygen partial pressure the layered material shows anomalous high conductivity, equal or superior to pure δ-Bi2O3 in air. This suggests a strategy to design and stabilize new materials...

  11. Graphene-oxide-supported Pt nanoparticles with high activity and stability for hydrazine electro-oxidation in a strong acidic solution

    Science.gov (United States)

    Kim, Ji Dang; Choi, Myong Yong; Choi, Hyun Chul

    2017-10-01

    Graphene-oxide-supported Pt (GO-Pt) nanoparticles were prepared by performing diimide-activated amidation and used in an electrocatalyst for hydrazine electro-oxidation in 0.5 M H2SO4 solution. The physico-chemical properties of the GO-Pt nanoparticles were characterized with various techniques, which revealed that highly dispersed Pt nanoparticles with an average size of 2.6 nm were densely deposited on the amidated GO due to their strong adhesion. Cyclic voltammograms were obtained and demonstrate that the GO-Pt catalyst exhibits significantly improved catalytic activity and long-term stability in hydrazine electro-oxidation in a strong acidic solution when compared to commercial Pt/C and Pt metal electrodes. These enhanced electrochemical properties are attributed to the large electrochemically active surface area that results from the smaller size and excellent dispersion of the Pt nanoparticles on amidated GO.

  12. Effects of thermal treatment on mineralogy and heavy metal behavior in iron oxide stabilized air pollution control residues

    DEFF Research Database (Denmark)

    Sørensen, Mette Abildgaard; Bender-Koch, C.; Starckpoole, M. M.

    2000-01-01

    Stabilization of air pollution control residues by coprecipitation with ferrous iron and subsequent thermal treatment (at 600 and 900 °C) has been examined as a means to reduce heavy metal leaching and to improve product stability. Changes in mineralogy and metal binding were analyzed using various...... volatilized or destabilized with respect to leaching. Pb, in particular, exhibited increased reactivity following the formation of an ordered iron oxide structure at 900 °C. The thermal treatment had a positive effect on Cr release, which was reduced significantly at 900 °C in the presence of organic matter...

  13. Water-soluble metal nanoparticles stabilized by plant polyphenols for improving the catalytic properties in oxidation of alcohols

    Science.gov (United States)

    Mao, H.; Liao, Y.; Ma, J.; Zhao, S. L.; Huo, F. W.

    2015-12-01

    Plant polyphenols extracted from plants are one of the most abundant biomasses in nature, which are typical water soluble natural polymers. Herein, we reported a facile approach for the synthesis of platinum nanoparticle (PtNP) aqueous colloid by utilizing black wattle tannin (BWT, a typical plant polyphenol) as amphiphilic stabilizer. The phenolic hydroxyls of BWT provide the PtNPs with enough hydrophilicity, and their reduction ability could protect the PtNPs from deactivation caused by oxygen atmosphere. Additionally, the hydrophilic nature of BWT could efficiently promote the oxidation of alcohols in water, meanwhile, the hydrophobic and rigid backbones of plant polyphenols are able to suppress the PtNPs from aggregating, thus ensuring the high dispersion of the PtNPs during reactions. Under mild aerobic conditions, the as-prepared BWT-Pt colloid catalyst exhibited high activity in a series of biphasic oxidation of aromatic alcohols and aliphatic alcohols. As for the cycling stability, the BWT-Pt catalyst showed no obvious decrease during the 7 cycles, revealing superior cycling stability as compared with the counterparts using PVP or PEG as the stabilizer.Plant polyphenols extracted from plants are one of the most abundant biomasses in nature, which are typical water soluble natural polymers. Herein, we reported a facile approach for the synthesis of platinum nanoparticle (PtNP) aqueous colloid by utilizing black wattle tannin (BWT, a typical plant polyphenol) as amphiphilic stabilizer. The phenolic hydroxyls of BWT provide the PtNPs with enough hydrophilicity, and their reduction ability could protect the PtNPs from deactivation caused by oxygen atmosphere. Additionally, the hydrophilic nature of BWT could efficiently promote the oxidation of alcohols in water, meanwhile, the hydrophobic and rigid backbones of plant polyphenols are able to suppress the PtNPs from aggregating, thus ensuring the high dispersion of the PtNPs during reactions. Under mild aerobic

  14. Oxidation stability of biodiesel fuels and blends using the Rancimat and PetroOXY methods. Effect of 4-allyl-2,6-dimetoxiphenol and cathecol as biodiesel additives on oxidation stability

    Directory of Open Access Journals (Sweden)

    Lucía eBotella

    2014-07-01

    Full Text Available In the present work, several fatty acid methyl esters (FAME have been synthesized from various fatty acid feedstocks: used frying olive oil, pork fat, soybean, rapeseed, sunflower and coconut. The oxidation stabilities of the biodiesel samples and of several blends have been measured simultaneously by both the Rancimat method, accepted by EN14112 standard, and the PetroOXY method, prEN16091 standard, with the aim of finding a correlation between both methodologies. Other biodiesel properties such as composition, cold filter plugging point (CFPP, flash point (FP and kinematic viscosity have also been analyzed using standard methods in order to further characterize the biodiesel produced. In addition, the effect on the biodiesel properties of using 4-allyl-2,6-dimetoxiphenol and cathecol as additives in biodiesel blends with rapeseed and with soybean has also been analyzed. The use of both antioxidants results in a considerable improvement in the oxidation stability of both types of biodiesel, especially using cathecol. Adding cathecol loads as low as 0.05 % (m/m in blends with soybean biodiesel and as low as 0.10 % (m/m in blends with rapeseed biodiesel is sufficient for the oxidation stabilities to comply with the restrictions established by the European EN14214 standard.An empirical linear equation is proposed to correlate the oxidation stability by the two methods, PetroOXY and Rancimat. It has been found that the presence of either cathecol or 4-allyl-2,6-dimetoxiphenol as additives affects the correlation observed.

  15. Oxidative stability of mayonnaise and milk drink produced with structured lipids based on fish oil and caprylic acid

    DEFF Research Database (Denmark)

    Timm Heinrich, Maike; Xu, Xuebing; Nielsen, Nina Skall

    2004-01-01

    The oxidative stabilities of traditional fish oil (FO), randomized lipids (RFO), or specific structured lipids (SFO) produced from fish oil were compared when incorporated into either milk drink or mayonnaise. Furthermore, the effect of adding the potential antioxidants EDTA (240 mg...... not be ascribed to a single factor, but was most likely influenced by the structure of the lipids and differences in the processes used to produce and purify the lipids. In milk drinks based on SFO, EDTA slightly reduced oxidation, while lactoferrin did not exert a distinct antioxidative effect...

  16. Bismuth(III) dialkyldithiophosphates: Facile single source precursors for the preparation of bismuth sulfide nanorods and bismuth phosphate thin films

    International Nuclear Information System (INIS)

    Biswal, Jasmine B.; Garje, Shivram S.; Nuwad, Jitendra; Pillai, C.G.S.

    2013-01-01

    Two different phase pure materials (Bi 2 S 3 and Bi 2 P 4 O 13 ) have been prepared under different conditions using the same single source precursors. Solvothermal decomposition of the complexes, Bi(S 2 P(OR) 2 ) 3 [where, R=Methyl (Me) (1), Ethyl (Et) (2), n-Propyl (Pr n ) (3) and iso-Propyl (Pr i ) (4)] in ethylene glycol gave orthorhombic bismuth sulfide nanorods, whereas aerosol assisted chemical vapor deposition (AACVD) of the same precursors deposited monoclinic bismuth tetraphosphate (Bi 2 P 4 O 13 ) thin films on glass substrates. Surface study of the thin films using SEM illustrated the formation of variety of nanoscale morphologies (spherical-, wire-, pendent-, doughnut- and flower-like) at different temperatures. AFM studies were carried out to evaluate quality of the films in terms of uniformity and roughness. Thin films of average roughness as low as 1.4 nm were deposited using these precursors. Photoluminescence studies of Bi 2 P 4 O 13 thin films were also carried out. - Graphical abstract: Solvothermal decomposition of bismuth(III) dialkyldithiophosphates in ethylene glycol gave Bi 2 S 3 nanoparticles, whereas aerosol assisted chemical vapor deposition of these single source precursors deposited Bi 2 P 4 O 13 thin films. Display Omitted - Highlights: • Preparation of phase pure orthorhombic Bi 2 S 3 nanorods and monoclinic Bi 2 P 4 O 13 thin films. • Use of single source precursors for deposition of bismuth phosphate thin films. • Use of solvothermal decomposition and AACVD methods. • Morphology controlled synthesis of Bi 2 P 4 O 13 thin films. • Bi 2 S 3 nanorods and Bi 2 P 4 O 13 thin films using same single source precursors

  17. Oxidative stability of cnicken thigh meat after treatment of abies alba essential oil

    Directory of Open Access Journals (Sweden)

    Adriana Pavelková

    2015-12-01

    Full Text Available In the present work, the effect of the Abies alba essential oil in two different concentrations on oxidative stability of chicken thigh muscles during chilled storage was investigated. In the experiment were chickens of hybrid combination Cobb 500 after 42 days of the fattening period slaughtered.  All the broiler chickens were fed with the same feed mixtures and were kept under the same conditions. The feed mixtures were produced without any antibiotic preparations and coccidiostatics. After slaughtering was dissection obtained fresh chicken thigh with skin from left half-carcass which were divided into five groups (n = 5: C - control air-packaged group; A1 - vacuum-packaged experimental group; A2 - vacuum-packaged experimental group with ethylenediaminetetraacetic acid (EDTA solution 1.50% w/w; A3 - vacuum-packaged experimental group with Abies alba oil 0.10% v/w and A4 - vacuum-packaged experimental group with Abies alba oil 0.20% v/w. The Abies alba essential oil was applicate on ground chicken things and immediately after dipping, each sample was packaged using a vacuum packaging machine and storage in refrigerate at 4 ±0.5 °C. Thiobarbituric acid (TBA value expressed in number of malondialdehyde was measured in the process of first storage day of 1st, 4th, 8th, 12th and 16th day after slaughtering and expressed on the amount of malondialdehyde (MDA in 1 kg sample. The treatments of chicken things with Abies alba essential oil show statistically significant differences between all testing groups and control group, where higher average value of MDA measured in thigh muscle of broiler chickens was in samples of control group (0.4380 mg.kg-1 compared to experimental groups A1 (0.124 mg.kg-1, A2 (0.086 mg.kg-1, A3 (0.082 mg.kg-1 and A4 (0.077 mg.kg-1 after 16-day of chilled storage. Experiment results show that the treatment of chicken thigh with Abies alba essential oil positively influenced on the reduction of oxidative processes in thigh

  18. Oxidative stability of chicken thigh meat after treatment of fennel and savory essential oils

    Directory of Open Access Journals (Sweden)

    Adriana Pavelková

    2016-05-01

    Full Text Available In the present work, the effect of the fennel and savory essential oils on oxidative stability of chicken thigh muscles during chilled storage was investigated. In the experiment were used chickens of hybrid combination Cobb 500 after 42 days of the fattening period. The obtained fresh chicken thigh with skin from left half-carcass were divided into five groups (n = 5: C - control air-packaged group; A1 - vacuum-packaged experimental group; A2 - vacuum-packaged experimental group with EDTA solution 1.50% w/w; A3 - vacuum-packaged experimental group with fennel (Foeniculum vulgare essential oil at concentrations 0.2% v/w and A4 - vacuum-packaged experimental group with savory (Satureja hortensis essential oil at concentration 0.2% v/w. The essential oils were applicate on surface chicken thighs. The chicken thighs were packaged using a vacuum packaging machine and stored in refrigerate at                 4 ±0.5 °C. The value of thiobarbituric acid (TBA expressed as amount of malondialdehyde (MDA in 1 kg sample was measured during storage in 1st, 4th, 8th, 12th and 16th day. The treatments of chicken thighs with fennel and savory essential oils show statistically significant differences between all testing groups and control group, where higher average value of MDA measured in thigh muscle of broiler chickens was in samples of control group                 (0.359 mg.kg-1 compared to experimental groups A1 (0.129 mg.kg-1, A2 (0.091 mg.kg-1, A3 (0.084 mg.kg-1 and A4 (0.089 mg.kg-1 after 16-day of chilled storage. Experiment results show that the treatment of chicken thigh with fennel and savory essential oils had positive influence on the reduction of oxidative processes in thigh muscles during chilling storage and use of essential oil is one of the options increase shelf life of fresh chicken meat.

  19. Combined isovalent alloying gallium arsenide with bismuth and indium

    International Nuclear Information System (INIS)

    Vorob'eva, V.V.; Zushinskaya, O.V.; Novikov, S.V.; Savel'ev, I.G.; Chaldyshev, V.V.

    1989-01-01

    Electric conductivity and the Hall effect at 77 and 300K of gallium arsenide epitaxial films grown from the melted solution with bismuth and indium additions at 77 and 300K. Different mechanisms of bismuth and indium effect on the ensamble of defects and background addition in gallium arsenide, are established. Bismuth effect is conditioned by the change of liquid phase properties, and indium effect is conditioned by the processes taking place in a crystal. The experimental results have shown that the mutual alloying of gallium arsenide with indium and bismuth in the process of liquid-phase epitaxy ensures high electrophysical film properties

  20. Ultrasonic and Thermal Properties of Borate and Phosphate Glasses Containing Bismuth and Lead

    International Nuclear Information System (INIS)

    Aziz, Sidek Hj. Abd.; Ahmad, Hamezan; Wahab, Zaidan A.; Sulaiman, Zainal Abidin; Talib, Zainal Abidin; Shaari, A. Halim; Senin, H. B.

    2007-01-01

    Systematic series of (B2O3,P2O5)-Bi2O3-PbO glasses have been successfully prepared by using the rapid quenching technique in which each oxide content changes for every series on the basis of its weight percentage. Their amorphous natures were confirmed earlier by the x-ray diffraction technique. The experimental results show that the density of both glasses, determined by using the Archimedes principle, increases with the glass modifier content. This is due to the replacement of Bi2O3 and PbO in the borate and phosphate glassy networks. The molar volume for borate glass increases with the addition of bismuth and lead oxides, but a reverse trend occurs for the phosphate glass. The longitudinal and shear ultrasound velocities, determined by the MBS 8000 system, of both lead bismuth borate and phosphate glasses show a decreasing trend as more PbO and Bi2O3 are added to the glass system. The increase in PbO/Bi2O3 content was probably related to the progressive increase in the concentration of non-bridging oxygen (NBOs). Thermal studies of the glass, using the Labsys DTA-Setaram machine, show that the value of the glass transition temperature (Tg) is closely related to the chemical bond in the system. In lead bismuth borate glasses, the addition of more Pb2+ and Bi3+ results in a more dominant ionic bond character in the system and hence decreases Tg of the sample. However, in lead bismuth phosphate glasses, the addition of Pb2+ and Bi3+ not only failed to weaken the covalent character in P-O-P bonds, but strengthened it further, leading to an increment in the values of Tg

  1. Application of the accelerated test Rancimat to evaluate oxidative stability of dried microencapsulated oils

    Directory of Open Access Journals (Sweden)

    Márquez-Ruiz, G.

    2000-08-01

    Full Text Available The objective of this work was to apply the oxidative test Rancimat to dried microencapsulated oils (DMO, with special emphasis on assessing the efficacy of natural antioxidants. DMO were prepared by freeze-drying emulsions containing sodium caseinate, lactose and fish or sunflower oils, with and without added the antioxidant mixture ALT (ascorbic acid, lecithin and tocopherol. Under the Rancimat working conditions selected for testing DMO (5 g sample, 100ºC and 20 L air/h, excellent repeatability was obtained. The antioxidant effect of ALT was much higher in bulk fish oil than in its counterpart DMO, either in Rancimat or at 30ºC in the dark. Further experiments using Rancimat showed that the moderate increase in stability of DMO added ALT was only attributable to tocopherol while the synergistic actions of lecithin and ascorbic acid were not observed, their action probably depending on their location and orientation in these complex lipid systems. This test enabled to compare monophasic (bulk oils and DMO-extracted oils and heterophasic lipidic systems (DMO and DMO devoid of the accessible, free oil fraction, thus offering a rapid means to examine the influence of oil distribution and partitioning of antioxidants on oxidative stability.El objetivo de este trabajo es la aplicación del test Rancimat a aceites microencapsulados, con especial interés en el estudio de la eficacia de antioxidantes naturales. Los aceites microencapsulados en matriz seca (DMO se prepararon mediante liofilización de emulsiones constituidas por caseinato sódico, lactosa y aceite de pescado o girasol, con o sin la mezcla antioxidante ALT (ácido ascórbico, lecitina y tocoferol. En las condiciones seleccionadas en Rancimat (5 g de muestra, 100ºC y 20 L/h aire se obtuvo excelente repetitividad. La mezcla ALT fue mucho más efectiva en el aceite de pescado que en su correspondiente DMO, tanto en Rancimat como a 30ºC en la oscuridad. Otros experimentos en

  2. Stability and Performance of Oxygen Electrodes for Reversible Solid Oxide Cells

    Science.gov (United States)

    Railsback, Justin Gary

    Worldwide, governments are beginning to take action to reduce anthropogenic CO2 emissions in order to mitigate the extent of global climate change. The largest fraction of global CO2 emission comes from electrical power generation, which is rapidly being converted to wind and solar installations. The intermittent nature of renewable resources requires that large scale energy storage be implemented to ensure grid stability. Pumped hydro storage is currently the only technology available for large scale energy storage; however, pumped hydro remains geographically confined and susceptible to seasonal fluctuations and offers limited discharge hours. Recent system level models predict that reversible solid oxide cells may be a competitive solution, but two key advancements are required to realize the technology: low cell resistance (system is desirable to achieve high round-trip efficiency. The electrochemical performance of mixed electronic-ionic conducting electrodes has not been reported above 1 atm. Four candidate electrodes are examined under pressurization up to 10 atm: Pr2NiO4 infiltrated La0.9Sr0.1 Ga0.8Mg0.2O3, Sm0.5Sr 0.5CoO3 infiltrated Ce0.9Gd0.1O 2, single phase La0.6Sr0.4Co0.2Fe 0.8O3, and single phase Nd2NiO4. The role of the ion conduction mechanism (vacancy or interstitial) is explored in relation to the decrease in polarization resistance with increased pressure. Current switched life-tests designed to emulate reversible solid oxide cell operating conditions were performed for a range of current densities and overpotentials on three candidate systems: composite La0.7Sr 0.3MnO3-Zr0.84Y0.16O2, single phase La0.6Sr0.4Co0.2Fe0.8O 3, and La2NiO4 infiltrated La0.9Sr 0.1Ga0.8Mg0.2O3. The degradation mode of each system is determined by impedance spectroscopy and post-test microstructural analysis. Operating regions of improved stability are identified for each system based on the measured degradation rates. Overpotential is determined to be the major

  3. Strength and thermal stability of Cu-Al2O3 composite obtained by internal oxidation

    Directory of Open Access Journals (Sweden)

    Jovanovic, M. T.

    2010-12-01

    Full Text Available The objective of the work is to study the effects of the high-energy milling on strengthening, thermal stability and electrical conductivity of Cu-Al2O3 composite. The prealloyed copper powders, atomized in inert gas and containing 3 wt. % Al, were milled up to 20 h in the planetary ball mill to oxidize in situ aluminium with oxygen from the air. Composite compacts were obtained by hot-pressing in an argon atmosphere at 800 °C for 3 h under the pressure of 35MPa. The microstructural characterization was performed by the optical microscope, scanning electron microscope (SEM, transmission electron microscope (TEM and X-ray diffraction analysis (XRD. The microhardness, electrical conductivity and density measurements were also carried out. The effect of internal oxidation and high-energy milling on strengthening of Cu-Al2O3 composite was significant, The increase of the microhardness of composite compacts (292 HV is almost threefold comparing to compacts processed from the as-received Cu-3 wt. % Al powder (102 HV. The grain size of Cu-Al2O3 compacts processed from 5 and 20 h-milled powders was 75 and 45 nm, respectively. The small increase in the grain size and the small microhardness drop indicate the high thermal stability of Cu-Al2O3 composite during high-temperature exposure at 800 °C.El objetivo del trabajo es el estudio de los efectos de la pulverización con altas energías sobre la resistencia, estabilidad térmica y conductividad eléctrica del compuesto Cu-Al2O3. El polvo pre-aleado de cobre, obtenido a través de la atomización con gas inerte y con un contenido de 3wt. % Al, se molió durante 20 h en el molino planetario de bolas dando lugar a la oxidación in situ del aluminio con el oxígeno del aire. El compuesto compactado se ha obtenido mediante prensado en caliente en atmósfera de argón a 800 °C durante 3 h y a una presión de 35MPa. La caracterización microestructural se hizo a través de microscopia óptica, microscopia

  4. Effect of carvacrol on the oxidative stability of palm oil during frying

    Directory of Open Access Journals (Sweden)

    İnanç, T.

    2014-12-01

    Full Text Available Fats and oils deteriorate physically and chemically at frying temperatures due to several reasons. The objective of this study was to assess the effect of carvacrol on the oxidative stability of palm oil during a repeated frying process. Potatoes were serially fried in carvacrol-added palm oil, BHT-added palm oil and a control oil (without any antioxidants. After each tenth frying cycle, several chemical analyses were carried out on collected samples to evaluate deterioration in the oils. The free fatty acid, para-anisidine, iodine, and total polar component values of the fresh oil were 0.080, 2.85, 57.1 and 7.5, respectively. These values changed to 0.165, 11.80, 46.7, 11.0, respectively for the control oil; 0.151, 11.28, 49.2 and 10.5 for BHT-added oil; 0.140, 7.19, 51.7, 10.0 for carvacrol-added oil after 40 frying cycles. The results revealed that the use of carvacrol could significantly improve the oxidative stability of palm oil when compared to the control samples. This effect was also comparable to BHT. Using carvacrol in frying oil slowed down the rate of the formation of conjugated dienes and trienes compared to the oil with BHT and the control. The frying process significantly changed the viscosity of the oil samples.Las grasas y aceites se deterioran física y químicamente a las temperaturas de fritura debido a diferentes razones. El objetivo de este estudio fue evaluar el efecto del carvacrol en la estabilidad oxidativa del aceite de palma durante el proceso de fritura repetida. Se sometió a fritura repetida patatas en el aceite de palma con carvacrol agregado, en aceite de palma con BHT agregado y en aceite control (sin antioxidante. Después de cada décimo ciclo de fritura, se realizaron diferentes análisis sobre las muestras recogidas para evaluar el deterioro de los aceites. Ácidos grasos libre, para-anisidina, índice de yodo y componentes polares totales del aceite fresco fueron: 0,080, 2,85, 57,1 y 7,5, respectivamente

  5. Evaluation of different vitamin E recommendations and bioactivity of α-tocopherol isomers in broiler nutrition by measuring oxidative stress in vivo and the oxidative stability of meat.

    Science.gov (United States)

    Voljc, M; Frankic, T; Levart, A; Nemec, M; Salobir, J

    2011-07-01

    The aim of this study was to compare recommendations for vitamin E supplementation regarding high polyunsaturated fatty acid intake and to compare the bioactivity of RRR- and all-rac-α-tocopherol with respect to oxidative stress in vivo and the oxidative stability of broiler meat. Fifty male broilers were divided into 5 groups. All groups received diets with a high inclusion of fat (7.5%), one with palm fat and the others with linseed oil, which were either unsupplemented or supplemented with vitamin E to contain in total 85 or 200 IU of vitamin E as all-rac-α-tocopherol and 85 IU as RRR-α-tocopherol. Oxidative stress in vivo was studied by measuring the DNA damage; measuring malondialdehyde (MDA) in plasma, liver, and breast muscle; and analyzing the antioxidant capacity of the lipid-soluble compounds, total antioxidant status of plasma, and antioxidant enzyme assays. The tocopherols in plasma, liver, and breast muscle were also analyzed. In vitro oxidative stability was studied by measuring MDA in fresh, stored, and heat-treated breast meat. Linseed oil, as opposed to palm fat, induced DNA fragmentation and MDA formation. Both forms and concentrations of vitamin E reduced DNA damage and breast muscle MDA. The groups receiving 200 IU of all-rac-α-tocopherol and 85 IU of RRR-α-tocopherol had much higher values for antioxidant capacity of lipid-soluble compounds than did the controls. No differences were observed in the values of antioxidant enzymes. The α-tocopherol levels in tissues and plasma were significantly influenced by the level of α-tocopherol supplementation. Malondialdehyde formation in meat from the vitamin E-supplemented groups was decreased in comparison with that from the control linseed oil group. We conclude that both vitamin E concentrations were insufficient to prevent all harmful effects of lipid oxidation in vivo and that both were equally effective. On the contrary, to ensure good stability of meat lipids, higher vitamin E

  6. Coating compositions comprising bismuth-alloyed zinc

    DEFF Research Database (Denmark)

    2008-01-01

    The present application discloses (i) a coating composition comprising a particulate zinc-based alloyed material, said material comprising 0.05-0.7% by weight of bismuth (Bi), the D50 of the particulate material being in the range of 2.5-30 µm; (ii) a coated structure comprising a metal structure......, wherein the material comprises 0.05-0.7%(w/w) of bismuth (Bi), and wherein the D50 of the particulate material is in the range of 2.5-30 µm; (iv) a composite powder consisting of at least 25%(w/w) of the particulate zinc-based alloyed material, the rest being a particulate material consisting of zinc...

  7. "Chemical contraction" in rubidium-bismuth melts

    Science.gov (United States)

    Khairulin, R. A.; Abdullaev, R. N.; Stankus, S. V.

    2017-10-01

    The density and thermal expansion of liquid rubidium and rubidium-bismuth alloy containing 25.0 at % Bi were measured by the gamma-ray attenuation technique at temperatures from liquidus to 1000 K. The results of this study were compared with the data obtained by other authors. The molar volume of the Rb75Bi25 melt strongly deviates from the additivity rule for ideal solutions.

  8. Bio-lubricants derived from waste cooking oil with improved oxidation stability and low-temperature properties.

    Science.gov (United States)

    Li, Weimin; Wang, Xiaobo

    2015-01-01

    Waste cooking oil (WCO) was chemically modified via epoxidation using H2O2 followed by transesterification with methanol and branched alcohols (isooctanol, isotridecanol and isooctadecanol) to produce bio-lubricants with improved oxidative stability and low temperature properties. Physicochemical properties of synthesized bio-lubricants such as pour point (PP), cloud point (CP), viscosity, viscosity index (VI), oxidative stability, and corrosion resistant property were determined according to standard methods. The synthesized bio-lubricants showed improved low temperature flow performances compared with WCO, which can be attributing to the introduction of branched chains in their molecular structures. What's more, the oxidation stability of the WCO showed more than 10 folds improvement due to the elimination of -C=C-bonds in the WCO molecule. Tribological performances of these bio-lubricants were also investigated using four-ball friction and wear tester. Experimental results showed that derivatives of WCO exhibited favorable physicochemical properties and tribological performances which making them good candidates in formulating eco-friendly lubricants.

  9. Chemical composition and oxidative stability of jussara (Euterpe edulis M.) oil extracted by cold and hot mechanical pressing

    International Nuclear Information System (INIS)

    Da Cunha, A.L.A.; Freitas, S.P.; Godoy, R.L.O.; Cabral, L.M.C.; Tonon, R.V.

    2017-01-01

    The aim of this work was to evaluate the effect of mechanical pressing on jussara oil yield, oxidative stability and carotenoid profile with or without heat application. Firstly, jussara pulp was centrifuged for juice extraction, and the resulting cake was dried until reaching 10% moisture content. Then, oil extraction was performed in an expeller press at 25 ºC (cold pressing) and at 50 ºC (hot pressing). The process performance was evaluated by the oil yield, and the crude jussara oil was characterized for fatty acid composition, acid value, carotenoid profile and oxidative stability. Jussara oil contained 74% unsaturated fatty acids, mainly oleic and linoleic acids (48% and 24%, respectively). The oil yield was almost twice as high for the hot process as compared to the cold one. Additionally, hot pressing resulted in 25% higher total carotenoid content as compared to cold pressing, with β-carotene as the most abundant one. Hot and cold pressing showed no difference in oil oxidative stability and fatty acid composition. [es

  10. Preparation of Graphene Oxide Stabilized Nickel Nanoparticles with Thermal Effusivity Properties by Laser Ablation Method

    OpenAIRE

    Sadrolhosseini, Amir Reza; Noor, A. S. M.; Shameli, Kamyar; Kharazmi, Alireza; Huang, N. M.; Mahdi, M. A.

    2013-01-01

    Nickel nanoparticles were dispersed uniformly in a graphene oxide solution, using a laser ablation technique with different ablation times that ranged from 5 to 20 minutes. The results indicate that the nickel nanoparticle sizes inside the graphene oxide decreased, and the volume fraction for the nickel nanoparticles in the graphene oxide increased with an increasing ablation time. Further, using Fourier Transform Infrared Spectroscopy, the nickel nanoparticles in the graphene oxide demonstra...

  11. Stabilization of Phenolic Radicals on Graphene Oxide : An XPS and EPR Study

    NARCIS (Netherlands)

    Stathi, Panagiota; Gournis, Dimitrios; Deligiannakis, Yiannis; Rudolf, Petra

    2015-01-01

    A graphene oxide-gallic acid hybrid material was synthesized by the immobilization of gallic acid (3,4,5-trihydroxobenzoic acid) on graphene oxide. The grafting was achieved via the formation of amide bonds between the amine groups on the organofunctionalized graphite oxide surface and the carboxyl

  12. Oxidative stability of lard and sunflower oil supplemented with coffee extracts under storage conditions

    Directory of Open Access Journals (Sweden)

    Budryn, Grażyna

    2011-06-01

    Full Text Available The oxidative stability of sunflower oil and lard supplemented with water extracts of green and roasted, Arabica and Robusta coffee beans was estimated. A decrease in the rate of fat oxidation reactions during the storage of samples for 12 weeks at ambient temperature which resulted from the addition of coffee extracts was evaluated using standard chemical methods such as the determination of peroxide and p-anisidine value and the assays of conjugated dienes and trienes as well as physical methods such as the determination of thermal profile by DSC. The sensory properties of all fat samples were also determined. These measurements showed that 0.1% water coffee extracts in fats decreased (p < 0.05 the quantities assayed by the chemical methods as compared to the control samples and approximately halved the rate of fat oxidation. In addition, the thermal profile analysis revealed that supplementing with coffee extracts reduced the extent of negative changes in the thermal properties of fats. The effectiveness of the tested coffee extracts decreased in the order: green Robusta > green Arabica > roasted Robusta > roasted Arabica.

    La estabilidad oxidativa de manteca y aceite de girasol suplementados con extractos acuosos de granos de café verde o tostado Arábica y Robusta fue estimada. Un descenso en la velocidad de las reacciones de oxidación de la grasa durante el almacenamiento de las muestras durante 12 semana a temperatura ambiente, que resulto de la adición de los extractos de café, fue evaluada usando métodos químicos estándares tales como la determinación de peróxidos y el índice de paranisidina y ensayos de dienos y trienos conjugados, así como métodos físicos tales como la determinación del perfil térmico por DSC. También las propiedades sensoriales de todas las grasas fueron estimadas. Estas medidas mostraron que extractos acuosos de café al 0.1% en la grasa decrecieron (p < 0.05 los valores obtenidos por los m

  13. Effect of Storage Time and Temperature on Dimensional Stability of Impressions Made with Zinc Oxide Impression Paste

    Directory of Open Access Journals (Sweden)

    Sareh Habibzadeh

    2016-10-01

    Full Text Available Objectives: This study aimed to assess the effect of storage time and temperature on dimensional stability of impressions made with Cavex Outline zinc oxide impression paste.Materials and Methods: A round stainless steel mold with five grooves (three horizontal and two vertical was used in this in-vitro experimental study. Cavex Outline impression paste was prepared according to the manufacturer’s instructions and applied to the mold. The mold was placed on a block and stored at 35°C and 100% humidity for setting. The impressions were poured with stone immediately and also after 30, 120, 240 and 420 minutes and 24 hours. The distance between the vertical lines on the casts was measured and compared with that in the immediately poured cast.Results: Storage in a refrigerator and at room temperature for zero to seven hours had no significant effect on dimensional stability of the impressions; however, 24 hours of storage in a refrigerator or at room temperature decreased the dimensional stability of Cavex Outline (P=0.001. Also, a significant association was found between dimensional changes following 24 hours of storage in a refrigerator (4°C and at room temperature (23°C; P<0.01.Conclusions: The optimal pouring time of Cavex Outline impressions with stone is between zero to seven hours, and 24 hours of storage significantly decreases the dimensional stability.Keywords: Dental Impression Materials; Zinc Oxide; Cavex

  14. Content of Total Phenolics, Flavan-3-Ols and Proanthocyanidins, Oxidative Stability and Antioxidant Capacity of Chocolate During Storage

    Directory of Open Access Journals (Sweden)

    Draženka Komes

    2016-01-01

    Full Text Available Antioxidant (AO capacity of chocolates with 27, 44 and 75 % cocoa was assessed after production and during twelve months of storage by direct current (DC polarographic assay, based on the decrease of anodic current caused by the formation of hydroxo-perhydroxyl mercury(II complex (HPMC in alkaline solutions of hydrogen peroxide at potentials of mercury oxidation, and two spectrophotometric assays. Relative antioxidant capacity index (RACI was calculated by taking the average value of the AO assay (the sample mass in all assays was identical. Oxidative stability of chocolate fat was determined by differential scanning calorimetry. Measured parameters and RACI were correlated mutually and with the content of total phenols (Folin-Ciocalteu assay, flavan-3-ols (vanillin and p-dimethylaminocinnamaldehyde assay and proanthocyanidins (modified Bate-Smith assay. During storage, the studied functional and health-related characteristics remained unchanged. Amongst applied AO assays, the DC polarographic one, whose validity was confirmed by two-way ANOVA and F-test, correlated most significantly with oxidative stability (oxidation onset temperature and induction time. In addition, principal component analysis was applied to characterise chocolate types.

  15. Deterioration of yttria-stabilized zirconia by boron carbide alone or mixed with metallic or oxidized Fe, Cr, Zr mixtures

    Science.gov (United States)

    De Bremaecker, A.; Ayrault, L.; Clément, B.

    2014-08-01

    In the frame of severe accident conditions (PHEBUS FPT3 test), different experiments were carried out on the interactions of 20% yttria-stabilized zirconia (YSZ) and 20% ceria-stab zirconia with boron carbide or its oxidation products (B2O3): either tests under steam between 1230° and 1700 °C with B4C alone or B4C mixed with metals, either tests under Ar with boron oxide present in a mixture of iron and chromium oxides. In all cases an interaction was observed with formation of intergranular yttrium borate. At 1700 °C boron oxide is able to “pump out” the Y stabiliser from the YSZ grains but also some trace elements (Ca and Al) and to form a eutectic containing YBO3 and yttrium calcium oxy-borate (YCOB). At the same time a substantial swelling (“bloating”) of the zirconia happens, qualitatively similar to the foaming of irradiated fuel in contact with a Zr-melt. In all samples the lowering of the Y (or Ce)-content in the YSZ grains is so sharp that in the interaction layers zirconia is no longer stabilized. This is important when YSZ is envisaged as simulant of UO2 or as inert matrix for Am-transmutation.

  16. Improved thermal stability of methylsilicone resins by compositing with N-doped graphene oxide/Co3O4 nanoparticles

    International Nuclear Information System (INIS)

    Jiang, Bo; Zhao, Liwei; Guo, Jiang; Yan, Xingru; Ding, Daowei; Zhu, Changcheng; Huang, Yudong; Guo, Zhanhu

    2016-01-01

    Nanoparticles play important roles in enhancing the thermal-resistance of hosting polymer resins. Despite tremendous efforts, developing thermally stable methylsilicone resin at high temperatures is still a challenge. Herein, we report a strategy to increase the activation energy to slow down the decomposition/degradation of methylsilicone resin using synergistic effects between the Co 3 O 4 nanoparticles and the nitrogen doped graphene oxide. The N-doped graphene oxides composited with Co 3 O 4 nanoparticles were prepared by hydrolysis of cobalt nitrate hexahydrate in the presence of graphene oxide and were incorporated into the methylsilicone resin. Two-stage decompositions were observed, i.e., 200–300 and 400–500 °C. The activation energy for the low temperature region was enhanced by 47.117 kJ/mol (vs. 57.76 kJ/mol for pure resin). The enhanced thermal stability was due to the fact that the nanofillers prevented the silicone hydroxyl chain ends ‘‘biting’’ to delay the degradation. The activation energy for high-temperature region was enhanced by 11.585 kJ/mol (vs. 171.95 kJ/mol for pure resin). The nanofillers formed a protective layer to isolate oxygen from the hosting resin. The mechanism for the enhanced thermal stability through prohibited degradation with synergism of these nitrogen-doped graphene oxide nanocomposites was proposed as well.Graphical Abstract

  17. Content of Total Phenolics, Flavan-3-Ols and Proanthocyanidins, Oxidative Stability and Antioxidant Capacity of Chocolate During Storage.

    Science.gov (United States)

    Laličić-Petronijević, Jovanka; Komes, Draženka; Gorjanović, Stanislava; Belščak-Cvitanović, Ana; Pezo, Lato; Pastor, Ferenc; Ostojić, Sanja; Popov-Raljić, Jovanka; Sužnjević, Desanka

    2016-03-01

    Antioxidant (AO) capacity of chocolates with 27, 44 and 75% cocoa was assessed after production and during twelve months of storage by direct current (DC) polarographic assay, based on the decrease of anodic current caused by the formation of hydroxo-perhydroxyl mercury(II) complex (HPMC) in alkaline solutions of hydrogen peroxide at potentials of mercury oxidation, and two spectrophotometric assays. Relative antioxidant capacity index (RACI) was calculated by taking the average value of the AO assay (the sample mass in all assays was identical). Oxidative stability of chocolate fat was determined by differential scanning calorimetry. Measured parameters and RACI were correlated mutually and with the content of total phenols (Folin-Ciocalteu assay), flavan-3-ols (vanillin and p -dimethylaminocinnamaldehyde assay) and proanthocyanidins (modified Bate-Smith assay). During storage, the studied functional and health-related characteristics remained unchanged. Amongst applied AO assays, the DC polarographic one, whose validity was confirmed by two-way ANOVA and F-test, correlated most significantly with oxidative stability (oxidation onset temperature and induction time). In addition, principal component analysis was applied to characterise chocolate types.

  18. Content of Total Phenolics, Flavan-3-Ols and Proanthocyanidins, Oxidative Stability and Antioxidant Capacity of Chocolate During Storage

    Science.gov (United States)

    Komes, Draženka; Gorjanović, Stanislava; Belščak-Cvitanović, Ana; Pezo, Lato; Pastor, Ferenc; Ostojić, Sanja; Popov-Raljić, Jovanka; Sužnjević, Desanka

    2016-01-01

    Summary Antioxidant (AO) capacity of chocolates with 27, 44 and 75% cocoa was assessed after production and during twelve months of storage by direct current (DC) polarographic assay, based on the decrease of anodic current caused by the formation of hydroxo-perhydroxyl mercury(II) complex (HPMC) in alkaline solutions of hydrogen peroxide at potentials of mercury oxidation, and two spectrophotometric assays. Relative antioxidant capacity index (RACI) was calculated by taking the average value of the AO assay (the sample mass in all assays was identical). Oxidative stability of chocolate fat was determined by differential scanning calorimetry. Measured parameters and RACI were correlated mutually and with the content of total phenols (Folin-Ciocalteu assay), flavan-3-ols (vanillin and p-dimethylaminocinnamaldehyde assay) and proanthocyanidins (modified Bate-Smith assay). During storage, the studied functional and health-related characteristics remained unchanged. Amongst applied AO assays, the DC polarographic one, whose validity was confirmed by two-way ANOVA and F-test, correlated most significantly with oxidative stability (oxidation onset temperature and induction time). In addition, principal component analysis was applied to characterise chocolate types. PMID:27904388

  19. Antioxidant effectiveness of vegetable powders on the lipid and protein oxidative stability of cooked Turkey meat patties: implications for health.

    Science.gov (United States)

    Duthie, Garry; Campbell, Fiona; Bestwick, Charles; Stephen, Sylvia; Russell, Wendy

    2013-04-17

    Lipid and protein oxidation decreases the shelf-life of foods and may result in formation of end-products potentially detrimental for health. Consumer pressure to decrease the use of synthetic phenolic antioxidants has encouraged identification of alternative compounds or extracts from natural sources. We have assessed whether inclusion of dried vegetable powders improves the oxidative stability of turkey meat patties. Such powders are not only potentially-rich sources of phenolic antioxidants, but also may impart additional health benefits, as inadequate vegetable consumption is a risk factor for heart disease and several cancers. In an accelerated oxidation system, six of eleven vegetable powders significantly (p protein carbonyls (r = 0.747, p powders offers an alternative to individual antioxidants for increasing shelf-life of animal-based food products and may also provide additional health benefits associated with increased vegetable intake.

  20. Bismuth-ceramic nanocomposites through ball milling and liquid crystal synthetic methods

    Science.gov (United States)

    Dellinger, Timothy Michael

    Three methods were developed for the synthesis of bismuth-ceramic nanocomposites, which are of interest due to possible use as thermoelectric materials. In the first synthetic method, high energy ball milling of bismuth metal with either MgO or SiO2 was found to produce nanostructured bismuth dispersed on a ceramic material. The morphology of the resulting bismuth depended on its wetting behavior with respect to the ceramic: the metal wet the MgO, but did not wet on the SiO2. Differential Scanning Calorimetry measurements on these composites revealed unusual thermal stability, with nanostructure retained after multiple cycles of heating and cooling through the metal's melting point. The second synthesis methodology was based on the use of lyotropic liquid crystals. These mixtures of water and amphiphilic molecules self-assemble to form periodic structures with nanometer-scale hydrophilic and hydrophobic domains. A novel shear mixing methodology was developed for bringing together reactants which were added to the liquid crystals as dissolved salts. The liquid crystals served to mediate synthesis by acting as nanoreactors to confine chemical reactions within the nanoscale domains of the mesophase, and resulted in the production of nanoparticles. By synthesizing lead sulfide (PbS) and bismuth (Bi) particles as proof-of-concept, it was shown that nanoparticle size could be controlled by controlling the dimensionality of the nanoreactors through control of the liquid crystalline phase. Particle size was shown to decrease upon going from three-dimensionally percolating nanoreactors, to two dimensional sheet-like nanoreactors, to one dimensional rod-like nanoreactors. Additionally, particle size could be controlled by varying the precursor salt concentration. Since the nanoparticles did not agglomerate in the liquid crystal immediately after synthesis, bismuth-ceramic nanocomposites could be prepared by synthesizing Bi nanoparticles and mixing in SiO2 particles which