WorldWideScience

Sample records for stability study yaquina

  1. Effects of climate change on water quality in the Yaquina ...

    Science.gov (United States)

    As part of a larger study to examine the effect of climate change (CC) on estuarine resources, we simulated the effect of rising sea level, alterations in river discharge, and increasing atmospheric temperatures on water quality in the Yaquina Estuary. Due to uncertainty in the effects of climate change, initial model simulations were performed for different steady river discharge rates that span the historical range in inflow, and for a range of increases in sea level and atmospheric temperature. Model simulations suggest that in the central portion of the estuary (19 km from mouth), a 60-cm increase in sea level will result in a 2-3 psu change in salinity across a broad range of river discharges. For the oligohaline portion of the estuary, salinity increases associated with a rise in sea level of 60 cm are only apparent at low river discharge rates (changes in river discharge, rising sea level, and atmospheric temperature associated with climate change produce non-linear patterns in the response of estuarine salinity and temperature, which vary with location inside the estuary and season. We also will discuss the importance of presenting results in a mann

  2. Tidal wetlands of the Yaquina and Alsea River estuaries, Oregon: Geographic Information Systems layer development and recommendations for National Wetlands Inventory revisions

    Science.gov (United States)

    Brophy, Laura S.; Reusser, Deborah A.; Janousek, Christopher N.

    2013-01-01

    Geographic Information Systems (GIS) layers of current, and likely former, tidal wetlands in two Oregon estuaries were generated by enhancing the 2010 National Wetlands Inventory (NWI) data with expert local field knowledge, Light Detection and Ranging-derived elevations, and 2009 aerial orthophotographs. Data were generated for two purposes: First, to enhance the NWI by recommending revised Cowardin classifications for certain NWI wetlands within the study area; and second, to generate GIS data for the 1999 Yaquina and Alsea River Basins Estuarine Wetland Site Prioritization study. Two sets of GIS products were generated: (1) enhanced NWI shapefiles; and (2) shapefiles of prioritization sites. The enhanced NWI shapefiles contain recommended changes to the Cowardin classification (system, subsystem, class, and/or modifiers) for 286 NWI polygons in the Yaquina estuary (1,133 acres) and 83 NWI polygons in the Alsea estuary (322 acres). These enhanced NWI shapefiles also identify likely former tidal wetlands that are classified as upland in the current NWI (64 NWI polygons totaling 441 acres in the Yaquina estuary; 16 NWI polygons totaling 51 acres in the Alsea estuary). The former tidal wetlands were identified to assist strategic planning for tidal wetland restoration. Cowardin classifications for the former tidal wetlands were not provided, because their current hydrology is complex owing to dikes, tide gates, and drainage ditches. The scope of this project did not include the field evaluation that would be needed to determine whether the former tidal wetlands are currently wetlands, and if so, determine their correct Cowardin classification. The prioritization site shapefiles contain 49 prioritization sites totaling 2,177 acres in the Yaquina estuary, and 39 prioritization sites totaling 1,045 acres in the Alsea estuary. The prioritization sites include current and former (for example, diked) tidal wetlands, and provide landscape units appropriate for basin

  3. Food Fortification Stability Study

    Science.gov (United States)

    Abdulmalik, T. O.; Cooper, M. R.; Douglas, G. L.

    2015-01-01

    NASA has established the goal of traveling beyond low-Earth orbit and extending manned exploration to Mars. The extended length of a Mars mission, along with the lack of resupply missions increases the importance of nutritional content in the food system. The purpose of this research is to assess the stability of vitamin supplementation in traditionally processed spaceflight foods. It is expected that commercially available fortificants will remain stable through long-duration missions if proper formulation, processing, and storage temperatures are all achieved. Five vitamins (vitamin E, vitamin K, pantothenic acid, folic acid, and thiamin) were blended into a vitamin premix (DSM, Freeport, TX); premixes were formulated to be compatible with current processing techniques (retort or freeze-dried), varied water activities (high or low), and packaging material. The overall goal of this process is to provide 25% of the recommended daily intake of each vitamin (per serving), following processing and two years of ambient storage. Four freeze-dried foods (Scrambled Eggs, Italian Vegetables, Potatoes Au Gratin, Noodles and Chicken) and four thermostabilized foods (Curry Sauce with Vegetables, Chicken Noodle Soup, Grilled Pork Chop, Rice with Butter) were produced (with and without the vitamin premix), to assess the impact of the added fortificant on color and taste, and to determine the stability of supplemental vitamins in spaceflight foods. The use of fortification in spaceflight foods appears to be a plausible mitigation step to inadequate nutrition. This is due to the ease of vitamin addition as well as the sustainability of the premixes through initial processing steps. Postprocessing analysis indicated that vitamin fortification with this premix did not immediately impact organoleptic properties of the food. At this stage, the largest hurdle to fortification is the preciseness to which vitamins can be added; the total amount of vitamins required for production is 10

  4. Food Fortification Stability Study

    Science.gov (United States)

    Sirmons, T.; Cooper, M.; Douglas, G.

    2017-01-01

    NASA has established the goal of traveling beyond low-Earth orbit and extending manned exploration to Mars. The length of proposed Mars missions and the lack of resupply missions increases the importance of nutritional content in the food system, which will need a five-year shelf life. The purpose of this research is to assess the stability of vitamin supplementation in traditionally processed spaceflight foods. It is expected that commercially available fortification nutrients will remain stable through a long duration exploration mission at sufficient levels if compatible formulation, processing, and storage temperatures are achieved. Five vitamins (vitamin E, vitamin K, pantothenic acid, folic acid, and thiamin) were blended into a vitamin premix (DSM, Freeport, TX) such that the vitamin concentration per serving equaled 25% of the recommended daily intake after two years of ambient storage. Four freeze-dried foods (Scrambled Eggs, Italian Vegetables, Potatoes Au Gratin, Noodles and Chicken) and four thermo-stabilized foods (Curry Sauce with Vegetables, Chicken Noodle Soup, Grilled Pork Chop, Rice with Butter) were produced, with and without the vitamin premix, to assess the impact of the added fortification on color and taste and to determine the stability of supplemental vitamins in spaceflight foods. The addition of fortification to spaceflight foods did not greatly alter the organoleptic properties of most products. In most cases, overall acceptability scores remained above 6.0 (minimum acceptable score) following six months and one year of low-temperature storage. Likewise, the color of fortified products appears to be preserved over one year of storage. The only exceptions were Grilled pork Chop and Chicken Noodle Soup whose individual components appeareddegrade rapidly over one year of storage. Finally, most vitamins appeared to be stable during long-term storage. The only exception was thiamin, which degraded rapidly during the first year of storage at

  5. Meteorological and navigational data collected aboard NOAA Ship Rainier in Yaquina Bay from 2014-11-21 to 2014-12-01 (NCEI Accession 0138154)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0138154 contains raw meteorological and navigational data logged by the Scientific Computer System (SCS) aboard NOAA Ship Rainier in Yaquina Bay near...

  6. Falls study: Proprioception, postural stability, and slips.

    Science.gov (United States)

    Sohn, Jeehoon; Kim, Sukwon

    2015-01-01

    The present study evaluated effects of exercise training on the proprioception sensitivity, postural stability, and the likelihood of slip-induced falls. Eighteen older adults (6 in balance, 6 in weight, and 6 in control groups) participated in this study. Three groups met three times per week over the course of eight weeks. Ankle and knee proprioception sensitivities and postural stability were measured. Slip-induced events were introduced for all participants before and after training. The results indicated that, overall, strength and postural stability were improved only in the training group, although proprioception sensitivity was improved in all groups. Training for older adults resulted in decreased likelihood of slip-induced falls. The study suggested that proprioception can be improved by simply being active, however, the results suggested that training would aid older adults in reducing the likelihood of slip-induced falls.

  7. A study on stability of rotating magnets

    International Nuclear Information System (INIS)

    Higuchi, N.; Kaiho, K.; Ishii, I.

    1996-01-01

    Superconducting power generators are being developed in Japan, as a part of a R and D program on energy technology, the New Sunshine Project. In this development, national laboratories are taking a role of fundamental studies to contribute to the R and D being carried out mainly by the manufacturers involved in a research association, Super-GM. Stabilities of magnets in a high gravitational field up to 2,000 G are discussed, based upon the experimental results of forced quench tests in a set of rotating magnets, in order to establish the stability design criterion of field windings of superconducting generators. Relations of propagation velocities, recovery currents, minimum quench energy and heat transfer characteristics are studied, a good agreement between the experimental results and a theory confirmed the improvement of magnet stability in a high gravitational field because of the enhanced heat transfer characteristics

  8. COMPARISON OF ANNUAL PRODUCTION ECOLOGY OF NATIVE EELGRASS ZOSTERA MARINA AND THE NON-NATIVE DWARF EELGRASS Z. JAPONICA IN YAQUINA BAY, OREGON

    Science.gov (United States)

    When non-native plant species invade a system they often change patterns of primary production. I evaluate the contribution of the seagrass Zostera marina and it's non-native congener Z. japonica to primary production in Yaquina Bay. Few measurements of Z. japonica production e...

  9. Chemical, physical, and other data from CTD casts from the YAQUINA as part of the International Decade of Ocean Exploration / Coastal Upwelling Ecosystems Analysis (IDOE/CUEA) from 20 June 1972 to 24 August 1973 (NODC Accession 7500532)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, physical, and other data were collected from CTD casts from the YAQUINA from 20 June 1972 to 24 August 1973. Data were collected by the University of...

  10. Time series physical oceanographic and tidal height data collected in Yaquina Bay from 11/01/1999 to 12/31/1999 as part of the Hatfield Marine Science Center Seawater Database (NODC Accession 0000129)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water characteristics of Yaquina Bay and Hatfield Marine Science Center's in-building seawater system, measured every six minutes since 1988. Tide height data is...

  11. Decommissioning and decontamination (burial ground stabilization) studies

    International Nuclear Information System (INIS)

    Cline, J.F.

    1980-01-01

    The decommissioning and decontamination of retired Hanford facilities and the future use of surrounding landscapes require isolation of contaminated wastes from the biosphere. Burial ground stabilization studies were conducted to determine the effectiveness of physical barriers for isolating contaminated wastes in shallow-land burial sites from plants and animals. This study was undertaken to determine the effectiveness of using a layer of loose rock between the waste and the surface soil covering to prevent both plant root and animal penetrations

  12. Preliminary Slope Stability Study Using Slope/ W

    International Nuclear Information System (INIS)

    Nazran Harun; Mohd Abd Wahab Yusof; Kamarudin Samuding; Mohd Muzamil Mohd Hashim; Nurul Fairuz Diyana Bahrudin

    2014-01-01

    Analyzing the stability of earth structures is the oldest type of numerical analysis in geotechnical engineering. Limit equilibrium types of analyses for assessing the stability of earth slopes have been in use in geotechnical engineering for many decades. Modern limit equilibrium software is making it possible to handle ever-increasing complexity within an analysis. It is being considered as the potential method in dealing with complex stratigraphy, highly irregular pore-water pressure conditions, various linear and nonlinear shear strength models and almost any kind of slip surface shape. It allows rapid decision making by providing an early indication of the potential suitability of sites based on slope stability analysis. Hence, a preliminary slope stability study has been developed to improve the capacity of Malaysian Nuclear Agency (Nuclear Malaysia) in assessing potential sites for Borehole Disposal for Disused Sealed Radioactive Sources. The results showed that geometry of cross section A-A ' , B-B ' , C-C ' and D-D ' achieved the factor of safety not less than 1.4 and these are deemed acceptable. (author)

  13. Study of TATP: stability of TATP solutions.

    Science.gov (United States)

    Pachman, Jiri; Matyáš, Robert

    2011-04-15

    Stability of raw TATP (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane) samples in solutions of common solvents was studied to highlight problems faced by forensic labs in identification and analysis of organic peroxide samples. The TATP samples were prepared by reaction of acetone and hydrogen peroxide (30%) with the aid of following catalysts: hydrochloric, sulfuric, nitric, perchloric and methanesulfonic acid. Acetone, acetonitrile, methanol and acetonitrile/water solutions of TATP samples were prepared and stored at 50°C. Various degrees of stability were observed for particular combination of catalyst and solvent ranging from totally unstable (catalyst-H(2)SO(4)/any solvent) to very stable (catalyst-HCl/solvent acetonitrile). Purification of crude TATP by re-crystallization results in product stable in all investigated solvents. Stability of solution prepared from re-crystallized DADP (3,3,6,6-tetramethyl-1,2,4,5-tetroxane) was found to be on the same level as the stability of solution of re-crystallized TATP. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  14. Small Ro/Pax Vessel stability study

    DEFF Research Database (Denmark)

    Erichsen, Henrik; Kristensen, Hans Otto Holmegaard; Jensen, Jørgen Juncher

    2015-01-01

    not sufficient, i.e. that the current safety level according to SOLAS 2009 is less than the old safety level according to SOLAS 90. In order to establish a solid foundation for the discussion, this study was made possible by a grant from The Danish Maritime Fund. The study focus on small ro/pax vessels......In 2009 new damage stability requirements for passenger ships based on a probabilistic method were adopted by IMO and are now part of the current SOLAS Chapter II-1 regulations (SOLAS 2009). The mandate from IMO was to keep the same safety level as inherent in the old deterministic damage stability...... regulations in SOLAS (SOLAS 90). During the rule development prior to the adoption, it was argued that the safety level for large passenger ships should be increased, but small ro/pax vessels were only rudimentarily looked at and small vessels with very high attained index were seen as “non...

  15. Avisalmvac: evaluation studies of stability and toxicity

    Directory of Open Access Journals (Sweden)

    Daniela Botus,

    2008-12-01

    Full Text Available In Pasteur Institute laboratories there was developed AVISALMVAC, a vaccine against avian Salmonella, a biological product that contains S. enteritidis and S. typhimurium bacterin, with oil adjuvant. This paper presents the results of the studies regarding the stability and toxicity evaluation of this vaccine stored under conditions recommended by the manufacturer (2-80C at the end of the period of validity. The vaccine stability was assessed by serological and histopathological analysis of samples from SPF chickens vaccinated with the product at the end of the period of validity. The study of Avisalmvac toxicity was carried out by inoculation of the product or its components on Vero cell monolayer, and the effects were microscopically recorded or by MTT test, applied at 6 days post-inoculation. Antibody titers recorded at 2 and 3 weeks post vaccination demonstrated the vaccine ability (used after an year since manufacture to induce synthesis of specific antibodies and therefore, the product stability was proven. Histopathological examinations carried out on samples taken at 18 days post vaccinationfrom the vaccination site (skeletal muscle and skin and spleen, did not show any lesions associated to vaccination with Avisalmvac. The cytotoxicity analysis made by inoculating the vaccine or its components on Vero cell monolayer and the microscopic examination did not record visible cytopathic effects for any vaccine dilutions or vaccine components. The cell metabolism evaluation by MTT assay made at 6 days after vaccine/vaccine components inoculation on Vero monolayer, shown the ability of the vaccine and oil adjuvant to stimulate cell metabolism, and a certain degree of toxicity / inhibition of dehydrogenase metabolism associated to one of emulsifier but at dilutions higher than those used in the vaccine formula.

  16. Study of theophylline stability on polymer matrix

    International Nuclear Information System (INIS)

    Rodrigues, Kiriaki M.S.; Parra, Duclerc F.; Oliveira, Maria Jose A.; Bustillos, Oscar V.; Lugao, Ademar B.

    2007-01-01

    Theophylline is a bronchodilator, commonly known and used as a drug model in the development of pharmaceutical formulations. The stability of the drug and the matrix, scope of this study, was evaluated in the solid formulation. Polymeric matrix based on PHB containing the drug (theophylline) was prepared and submitted to radiation sterilization at different doses of: 5, 10, 20 and 25 kGy using a Cobalt- 60 source. The modified drug release of theophylline sterilized tablets has been studied. Modern techniques of HPLC (High Pressure Liquid Chromatography), DSC (Differential scanning calorimetry) and TGA (Thermogravimetry analysis) were employed. The results have shown the influence of sterilization by radiation process in both the theophylline and the polymeric drug delivery matrix samples. The increasing of polymeric matrix crosslinking under radiation conditions retards the drug release while the theophylline structure is stable under the radiation (author)

  17. Study on stability of DMS meridian detector.

    Science.gov (United States)

    Yang, Ning; Huang, Li; Yuan, Jiamin; Zhang, Zhifang; Yang, Zhimin

    2016-05-01

    The stability of meridian detector was the basis to study meridian through conductance method. Ancient documents mentioned that the human body's blood could change with the time and meridians. When qi and blood came, the qi and blood would be full of that place; when qi and blood gone, the local skin shining could fade and recess. It liked the tidal fluctuation, then caused the corresponding acupuncture points conductance value changes. Modern studies had reported that meridian detector instrument the skin area of twelve meridians acupuncture points could change along with time within 24 hours. In this circumstance, whether the conductance values changes in human acupuncture points had statistical significance was vital important. DMS meridian detector instruction was adopt to measure the twelve meridian jingyuan acupuncture point in order to analyze the acupuncture point conductance value changes within one day.

  18. Stability studies on piroxicam encapsulated niosomes.

    Science.gov (United States)

    Ertekin, Zehra Ceren; Bayindir, Zerrin Sezgin; Yuksel, Nilufer

    2015-01-01

    Drug delivery systems which yield ideal treatments are currently the center of interest for researchers. Niosomes have numerous advantages over other drug delivery systems. However, stability issue is not clear yet and is a serious drawback for niosomes. In this study, the stability of niosomes was the center of interest. Piroxicam which was chosen as the model drug was loaded to niosomes. Niosomes were prepared by thin-film method and different forms (aqueous dispersion, lyophilized powder and lyophilized powder with cryoprotectant) of the original niosome formulation were prepared. The samples were stored either at 5°C±3°C or 25°C±2°C/60% RH±5% RH for 3 months. The drug leakage percent, particle size and distribution, zeta potential, drug release profiles were determined and niosomes were visualized under optic microscope. Niosome formulation provided sustained release of piroxicam. The drug leakage from stored niosomes was observed at the level of 1.56-6.63 %. Individual vesicle images were obtained for all samples by optical microscope. However, particle size of niosomes was increased upon storage. The zeta potential values were neither related to time nor physical form. Drug release profiles and amounts were quite similar for all forms of niosomes and the original formulation but a slight decrease was noticed on drug release amounts by time. This indicates that niosomes become more rigid by time. Although the ideal storage was obtained with lyophilized niosomes at 5±3°C in this study, the usage of suitable cryoprotectant and optimized lyophilization process should be further evaluated.

  19. Rock stability analysis – A case study

    Directory of Open Access Journals (Sweden)

    Lahmili A.

    2018-01-01

    Full Text Available The problems of the stability of the mineral-bearing structure ST2 at 560 m of depth in the east zone of Bou-azzer mine disturbs the advance of the exploitation. The geological and structural study based on field observations and the analysis of core drilling shows the presence of altered and fractured diorite surmounted by cobalt mineralization. Based on the empirical methods of Barton (Q-system and Bieniawski (RMR the bed rock is classified as poor quality. The analytical study made it possible to dimension supporting by bow-pieces and bolting. The existence of several types of discontinuities (fault, diaclases and joints has made the realization of numerical simulation by the finite elements method very difficult. These discontinuities create a network of natural fractures which cut out the blocks in various forms likely to be detached or slip into the excavation, thus encouraging the infiltration of water creating pressure on the massif. The classical studies show their limits in practice for installation of supporting because they must take into account the characteristics of discontinuities. Hence a structural analysis of the massif is essential. The cracking survey of ST2 at 560 m of depth in the east zone of Bou-azzer mine at 560m of depth, and their processing by the DIPS software, showed the existence of three main families of discontinuity NW-SE with a dip of 75SW, NS subverticale and NE-SW with a dip of 57NW, and two families of minor joints NW-SE and NE-SW with successive dips of 40SW and 75SE. The analysis of fracturing surveys allowed us to evaluate the risks of falling blocks and the families of discontinuity responsible for them, and to limit the zones presenting a risk of slip and the families responsible for them. The importance of this study is of knowing how and where to put supporting to be opposed to the risk of fall and tilting of the blocks, caused by the network of discontinuities of the massif.

  20. Accelerating Vaccine Formulation Development Using Design of Experiment Stability Studies.

    Science.gov (United States)

    Ahl, Patrick L; Mensch, Christopher; Hu, Binghua; Pixley, Heidi; Zhang, Lan; Dieter, Lance; Russell, Ryann; Smith, William J; Przysiecki, Craig; Kosinski, Mike; Blue, Jeffrey T

    2016-10-01

    Vaccine drug product thermal stability often depends on formulation input factors and how they interact. Scientific understanding and professional experience typically allows vaccine formulators to accurately predict the thermal stability output based on formulation input factors such as pH, ionic strength, and excipients. Thermal stability predictions, however, are not enough for regulators. Stability claims must be supported by experimental data. The Quality by Design approach of Design of Experiment (DoE) is well suited to describe formulation outputs such as thermal stability in terms of formulation input factors. A DoE approach particularly at elevated temperatures that induce accelerated degradation can provide empirical understanding of how vaccine formulation input factors and interactions affect vaccine stability output performance. This is possible even when clear scientific understanding of particular formulation stability mechanisms are lacking. A DoE approach was used in an accelerated 37(°)C stability study of an aluminum adjuvant Neisseria meningitidis serogroup B vaccine. Formulation stability differences were identified after only 15 days into the study. We believe this study demonstrates the power of combining DoE methodology with accelerated stress stability studies to accelerate and improve vaccine formulation development programs particularly during the preformulation stage. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  1. Equations for studies of feedback stabilization

    International Nuclear Information System (INIS)

    Boozer, A.H.

    1998-01-01

    Important ideal magnetohydrodynamic (MHD) instabilities grow slowly when a conducting wall surrounds a toroidal plasma. Feedback stabilization of these instabilities may be required for tokamaks and other magnetic confinement concepts to achieve adequate plasma pressure and self-driven current for practical fusion power. Equations are derived for simulating feedback stabilization, which require the minimum information about an ideal plasma for an exact analysis. The equations are solved in the approximation of one unstable mode, one wall circuit, one feedback circuit, and one sensor circuit. The analysis based on a single unstable mode is shown to be mathematically equivalent to the standard analysis of feedback of the axisymmetric vertical instability of tokamaks. Unlike that analysis, the method presented here applies to multiple modes that are coupled by the wall and to arbitrary toroidal mode numbers. copyright 1998 American Institute of Physics

  2. Detailed nuclear structure studies far from stability

    International Nuclear Information System (INIS)

    Wood, J.L.; Schwarzenberg, J.; Zganjar, E.F.; Rupnik, D.

    1991-01-01

    State-of--the-art spectroscopy of nuclei far from stability has achieved an extraordinary level of sophistication and detail in the last ten years. In principle, if a state can be populated, it can be characterized by its energy, spin, parity, and major decay paths. Sometimes its lifetime can be measured. In practice, one is confronted with enormous complexity. To convert raw spectroscopic data into nuclear structure data involves a complex process of disentangling gamma rays and conversion electrons into decay schemes. Specifically, coincidence techniques, especially coincidence intensities, play a crucial role in this process. Recent examples and methods from work done at UNISOR are presented

  3. Physico-Chemical Stability Studies of Neem (Azadirachta indica ...

    African Journals Online (AJOL)

    Nekky Umera

    present study, neem oil had been extracted from the ripe seed of Azadirachta indica (A. juss) plant. The oil was ... stability is not a problem for neem oil in a vanishing cream base formulation. Keywords: Neem oil, Stability, Shelf life, ... The containers were covered with filter paper and the solvent was allowed to evaporate.

  4. Experimental study of flame stability in biogas premix system

    International Nuclear Information System (INIS)

    Diaz G, Carlos A; Amell A Andres; Cardona Luis F

    2008-01-01

    Utilization of new renewable energy sources have had a special interest in last years looking for decrease the dependence of fossil fuels and the environmental impact generated for them. This work studies experimentally the flame stability of a simulated biogas with a volumetric composition of 60% methane and 40% carbon dioxide. The objective of this study is to obtain information about design and interchangeability of gases in premixed combustion systems that operate with different fuel gases. The critical velocity gradient was the stability criteria used. Utilization of this criteria and the experimental method followed, using a partial premixed burner, stability flame diagram of biogas studied had been obtained. Presence of carbon dioxide has a negative effect in flame stability, decreasing significantly the laminar flame speed and consequently, the stability range of biogas burners because of apparition of blow off.

  5. Study of the 50 mg Propylthiouracil tablets stability

    International Nuclear Information System (INIS)

    Valdes Bendoyro, Maria Olga; Garcia Penna, Caridad Margarita; Lugones Fernandez, Juan

    2010-01-01

    Authors developed a stability study of 50 mg Propylthiouracil tablets and determination of its expiry date. This study was conducted by fixed life methods and of accelerated stability by high-performance liquid chromatography, validated in Drugs Research and Development Center. Fixed life study was conducted during 24 months at room temperature; whereas the accelerated stability study was conducted exposing the product to light influence, humidity and temperature; during 3 months a analysis was performed for the two first ones and over 6 months in the case of temperature study. Propylthiouracil formula (50 mg tablets) fulfilled the quality specifications described in Pharmacopeia. Results of stability study by fixed life after 24 months showed that thr product maintain the parameter determining its quality during this period, and in the accelerated studies there was not a significant degradation of product. Two years was the expity date established in above mentioned conditions

  6. Non-parametric approach to the study of phenotypic stability.

    Science.gov (United States)

    Ferreira, D F; Fernandes, S B; Bruzi, A T; Ramalho, M A P

    2016-02-19

    The aim of this study was to undertake the theoretical derivations of non-parametric methods, which use linear regressions based on rank order, for stability analyses. These methods were extension different parametric methods used for stability analyses and the result was compared with a standard non-parametric method. Intensive computational methods (e.g., bootstrap and permutation) were applied, and data from the plant-breeding program of the Biology Department of UFLA (Minas Gerais, Brazil) were used to illustrate and compare the tests. The non-parametric stability methods were effective for the evaluation of phenotypic stability. In the presence of variance heterogeneity, the non-parametric methods exhibited greater power of discrimination when determining the phenotypic stability of genotypes.

  7. Study of mine stability using records of ground tilting

    CSIR Research Space (South Africa)

    Spottiswoode, SM

    2006-06-01

    Full Text Available -carrying capacity of the pillars. Physical measurements of pillar deformations were deemed necessary. Towards this end, the use of ground ARMA/USRMS 06-1168 A study of mine stability...

  8. Hydrographic, current profile, and other data from STD and other instruments from the NW Pacific (limit-180) from the YAQUINA and other platforms as part of the International Decade of Ocean Exploration / Cooperative Investigations of the Caribbean and Adjacent Regions (IDOE/CICAR) and related projects from 31 July 1972 to 25 August 1972 (NODC Accession 7500531)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hydrographic, current profiles, and other data were collected from STD and other instruments in the NW Pacific (limit-180) from the YAQUINA from 31 July 1972 to 25...

  9. Stabilization

    Directory of Open Access Journals (Sweden)

    Muhammad H. Al-Malack

    2016-07-01

    Full Text Available Fuel oil flyash (FFA produced in power and water desalination plants firing crude oils in the Kingdom of Saudi Arabia is being disposed in landfills, which increases the burden on the environment, therefore, FFA utilization must be encouraged. In the current research, the effect of adding FFA on the engineering properties of two indigenous soils, namely sand and marl, was investigated. FFA was added at concentrations of 5%, 10% and 15% to both soils with and without the addition of Portland cement. Mixtures of the stabilized soils were thoroughly evaluated using compaction, California Bearing Ratio (CBR, unconfined compressive strength (USC and durability tests. Results of these tests indicated that stabilized sand mixtures could not attain the ACI strength requirements. However, marl was found to satisfy the ACI strength requirement when only 5% of FFA was added together with 5% of cement. When the FFA was increased to 10% and 15%, the mixture’s strength was found to decrease to values below the ACI requirements. Results of the Toxicity Characteristics Leaching Procedure (TCLP, which was performed on samples that passed the ACI requirements, indicated that FFA must be cautiously used in soil stabilization.

  10. Numerical Study on Soil Arching Effects of Stabilizing Piles

    OpenAIRE

    Fan, Fusong; Chen, Guangqi; Hu, Xinli; Wang, Wei

    2015-01-01

    The Soil arching effect, the transfer of soil pressure from the yielding soil to the piles support, is a phenomena commonly encountered in geotechnical engineering for stabilizing landslides. In this paper, the (finite element method) FEM and (discontinuous deformation analysis) DDA were used to study on the soil arching effects of stabilizing piles in landslides. This paper proposes a method for two dimensional numerical simulation to perform three dimensional soil-pile interaction so that t...

  11. Importance of the different posterolateral knee static stabilizers: biomechanical study

    Directory of Open Access Journals (Sweden)

    Rodrigo Campos Pace Lasmar

    2010-01-01

    Full Text Available PURPOSE: The purpose of this study was to evaluate the relative importance of the different static stabilizers of the posterolateral corner of the knee in cadavers. METHODS: Tests were performed with the application of a varus and external rotation force to the knee in extension at 30 and 60 degrees of flexion using 10 cadaver knees. The forces were applied initially to an intact knee and then repeated after a selective sectioning of the ligaments into the following: section of the lateral collateral ligament; section of the lateral collateral ligament and the popliteofibular complex; and section of the lateral collateral ligament, the popliteofibular complex and the posterolateral capsule. The parameters studied were the angular deformity and stiffness when the knees were submitted to a 15 Newton-meter varus torque and a 6 Newton-meter external tibial torque. Statistical analysis was performed using the ANOVA (Analysis of Variance and Tukey's tests. RESULTS AND CONCLUSION: Our findings showed that the lateral collateral ligament was important in varus stability at 0, 30 and 60 degrees. The popliteofibular complex was the most important structure for external rotation stability at all angles of flexion and was also important for varus stability at 30 and 60 degrees. The posterolateral capsule was important for varus stability at 0 and 30 degrees and for external rotation stability in extension. Level of evidence: Level IV (cadaver study.

  12. Study of orbit stability in the SSRF storage ring

    International Nuclear Information System (INIS)

    Dai Zhimin; Liu Guimin; Huang Nan

    2003-01-01

    In this paper, analysis of the beam orbit stability and conceptual study of the dynamic orbit feedback in the SSRF storage ring are presented. It is shown that beam orbit position movement at the photon source points is smaller than the orbit stability requirements in horizontal plane, but exceeds the orbit stability requirements in vertical plane. A dynamic global orbit feedback system, which consists of 38 high-bandwidth air-coil correctors and 40 high-precise BPMs, is proposed to suppress the vertical beam orbit position movement. Numerical simulations show that this dynamic orbit feedback system can stabilize the vertical beam orbit position movement in the frequency range up to 100 Hz

  13. Bechevin Bay, Alaska, Inlet Stability Study.

    Science.gov (United States)

    1985-05-01

    Krenitzin. Bechevin Inlet, Bechevin Bay, and Isanotski Strait form an inlet system which * separates Unimak Island from the Alaska Peninsula. This...from the North Pacific must travel around Unimak Island through Unimak Pass. This route is 100-150 miles longer than the route through the Bechevin...period was semidiurnal, while the tidal flow at Unimak Pass (not too far southwest from the study area) was, interestingly, diurnal. Second, the phase

  14. Gamma radiation stability studies of mercury fulminate

    International Nuclear Information System (INIS)

    Fondeur, F.F.

    2000-01-01

    Mercury fulminate completely decomposed in a gamma source (0.86 Mrad/h) after a dose of 208 Mrad. This exposure equates to approximately 2.4 years in Tank 15H and 4 years in Tank 12H, one of the vessels of concern. Since the tanks lost the supernatant cover layer more than a decade ago, this study suggests that any mercury fulminate or closely related energetic species decomposed long ago if ever formed

  15. Gamma radiation stability studies of mercury fulminate

    Energy Technology Data Exchange (ETDEWEB)

    Fondeur, F.F.

    2000-02-17

    Mercury fulminate completely decomposed in a gamma source (0.86 Mrad/h) after a dose of 208 Mrad. This exposure equates to approximately 2.4 years in Tank 15H and 4 years in Tank 12H, one of the vessels of concern. Since the tanks lost the supernatant cover layer more than a decade ago, this study suggests that any mercury fulminate or closely related energetic species decomposed long ago if ever formed.

  16. Stability study in one step steam generators

    International Nuclear Information System (INIS)

    Abbate, P.

    1990-01-01

    The TWO program is presented developed for the behaviour limit calculation stable in one step steam generators for the case of Density Waves phenomenom. The program is based on a nodal model which, using Laplace transformation equations, allows to study the system's transfer functions and foresee the beginning of the unstable behaviour. This program has been satisfactorily validated against channels data uniformly heated in the range from 4.0 to 6.0 Mpa. Results on the CAREM reactor's steam generator analysis are presented. (Author) [es

  17. Stability studies of alkoxysilanes in aqueous media.

    Science.gov (United States)

    Kallos, G J; Tou, J C; Malczewski, R M; Boley, W F

    1991-07-01

    In order to correlate hydrolysis rates under physiological conditions to differences in toxicity of trimethoxysilane, tetramethoxysilane, and methyltrimethoxysilane, the rates of hydrolysis of these compounds were studied in deionized water, sodium phosphate buffer solution at pH 7.4, and 10% rat serum in sodium phosphate buffer at 37.4 degrees C. A strong surface effect was observed on the hydrolysis rates of tetramethoxysilane in different reactors in the following decreasing order: quartz greater than soft glass (I) greater than stainless steel greater than Teflon greater than soft glass (II). By using the soft glass (II) reactor as the reaction vessel for hydrolysis experiments, trimethoxysilane and tetramethoxysilane were found to be very unstable in 0.15 M sodium phosphate buffer (pH 7.4) and 10% rat serum (0.15 M sodium phosphate buffer, pH 7.4) with similar rates of hydrolysis at greater than 3.0 min-1 (t 1/2 less than 0.23 min). Under similar conditions, however, the rate of hydrolysis for tetramethoxysilane in deionized water was measured to be considerably slower (k = 0.022 min-1; t 1/2 = 32 min) than that of trimethoxysilane (k greater than 8.1 min-1, t 1/2 less than 0.09 min). However, the rates of hydrolysis for methyltrimethoxysilane in water, sodium phosphate buffer at pH 7.4, and 10% rat serum were measured to be 0.03 min-1 (t 1/2 = 24 min), 0.10 min-1 (t 1/2 = 6.7 min), and 0.08 min-1 (t 1/2 = 8.6 min), respectively.

  18. Comparative study of stability in different TCP/RED models

    International Nuclear Information System (INIS)

    Nga, J.H.C.; Iu, H.H.C.; Ling, S.H.; Lam, H.K.

    2008-01-01

    This paper studies the stability issue of the average queue length of a Transmission Control Protocol (TCP) model when interacting with Random Early Detection (RED). The model used for the study has shown period doubling bifurcation (PDB) and border collision bifurcation (BCB) in the average queue size at certain values of parameters when original RED is deployed. In this paper, we adopt a gentle version of RED and a newly derived RED algorithm into the model to study the improvement in stability of average queue size of the system

  19. Doping control container for urine stabilization: a pilot study.

    Science.gov (United States)

    Tsivou, Maria; Giannadaki, Evangelia; Hooghe, Fiona; Roels, Kris; Van Gansbeke, Wim; Garribba, Flaminia; Lyris, Emmanouil; Deventer, Koen; Mazzarino, Monica; Donati, Francesco; Georgakopoulos, Dimitrios G; Van Eenoo, Peter; Georgakopoulos, Costas G; de la Torre, Xavier; Botrè, Francesco

    2017-05-01

    Urine collection containers used in the doping control collection procedure do not provide a protective environment for urine, against degradation by microorganisms and proteolytic enzymes. An in-house chemical stabilization mixture was developed to tackle urine degradation problems encountered in human sport samples, in cases of microbial contamination or proteolytic activity. The mixture consists of antimicrobial substances and protease inhibitors for the simultaneous inactivation of a wide range of proteolytic enzymes. It has already been tested in lab-scale, as part of World Anti-Doping Agency's (WADA) funded research project, in terms of efficiency against microbial and proteolytic activity. The present work, funded also by WADA, is a follow-up study on the improvement of chemical stabilization mixture composition, application mode and limitation of interferences, using pilot urine collection containers, spray-coated in their internal surface with the chemical stabilization mixture. Urine in plastic stabilized collection containers have been gone through various incubation cycles to test for stabilization efficiency and analytical matrix interferences by three WADA accredited Laboratories (Athens, Ghent, and Rome). The spray-coated chemical stabilization mixture was tested against microorganism elimination and steroid glucuronide degradation, as well as enzymatic breakdown of proteins, such as intact hCG, recombinant erythropoietin and small peptides (GHRPs, ipamorelin), induced by proteolytic enzymes. Potential analytical interferences, observed in the presence of spray-coated chemical stabilization mixture, were recorded using routine screening procedures. The results of the current study support the application of the spray-coated plastic urine container, in the doping control collection procedure. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  20. Importance of stability study of continuous systems for ethanol production.

    Science.gov (United States)

    Paz Astudillo, Isabel Cristina; Cardona Alzate, Carlos Ariel

    2011-01-10

    Fuel ethanol industry presents different problems during bioreactors operation. One of them is the unexpected variation in the output ethanol concentration from the bioreactor or a drastic fall in the productivity. In this paper, a compilation of concepts and relevant results of several experimental and theoretical studies about dynamic behavior of fermentation systems for bioethanol production with Saccharomyces cerevisiae and Zymomonas mobilis is done with the purpose of understanding the stability phenomena that could affect the productivity of industries producing fuel ethanol. It is shown that the design of high scale biochemical processes for fuel ethanol production must be done based on stability studies. © 2010 Elsevier B.V. All rights reserved.

  1. Stability studies of colloidal silica dispersions in binary solvent mixtures

    CERN Document Server

    Bean, K H

    1997-01-01

    A series of monodispersed colloidal silica dispersions, of varying radii, has been prepared. These particles are hydrophilic in nature due to the presence of surface silanol groups. Some of the particles have been rendered hydrophobic by terminally grafting n-alkyl (C sub 1 sub 8) chains to the surface. The stability of dispersions of these various particles has been studied in binary mixtures of liquids, namely (i) ethanol and cyclohexane, and (ii) benzene and n-heptane. The ethanol - cyclohexane systems have been studied using a variety of techniques. Adsorption excess isotherms have been established and electrophoretic mobility measurements have been made. The predicted stability of the dispersions from D.V.L.O. calculations is compared to the observed stability. The hydrophilic silica particles behave as predicted by the calculations, with the zeta potential decreasing and the van der Waals attraction increasing with increasing cyclohexane concentration. The hydrophobic particles behave differently than e...

  2. [Formulation and stability of suspensions for preclinical study].

    Science.gov (United States)

    Burgalassi, S; Perini, G; Giannaccini, B; Saettone, M F; Lodi, A

    1997-11-01

    In preclinical studies, poorly soluble drugs are usually administered orally to experimental animals as suspensions. The present study was aimed at providing data allowing predictive estimations of the stability of such suspensions. To this purpose aqueous suspensions of three drugs (griseofulvin, ibuprofen and indomethacin) were prepared at different concentrations using four different suspending agents: sodium carboxymethylcellulose (CMC), microcrystalline cellulose/carboxymethylcellulose (MC/CMC), hydroxypropylmethylcellulose (HPMC) and jota carragenaan (CJ). The physical and physico-chemical characteristics of the drugs, the rheological properties of the suspending media and of the corresponding drug suspensions, and the physical and chemical stability of the suspensions was then evaluated. The type of suspending agent, rather than the physical characteristics of the drug, appeared to exert the main influence on the physical stability of suspensions. The most stable formulations were produced by suspending agents with low-temperature gelation characteristics (CJ) or with thixotropic flux (MC/CMC).

  3. Thermodynamic stability studies of Ce-Sb compounds with Fe

    Science.gov (United States)

    Xie, Yi; Zhang, Jinsuo; Benson, Michael T.; Mariani, Robert D.

    2018-02-01

    Lanthanide fission products can migrate to the fuel periphery and react with cladding, causing fuel-cladding chemical interaction (FCCI). Adding a fuel additive dopant, such as Sb, can bind lanthanide, such as Ce, into metallic compounds and thus prevent migration. The present study focuses on the thermodynamic stability of Ce-Sb compounds when in contact with the major cladding constituent Fe by conducting diffusion couple tests. Ce-Sb compounds have shown high thermodynamic stability as they did not react with Fe. When Fe-Sb compounds contacted with Ce, Sb was separated out of Fe-Sb compounds and formed the more stable Ce-Sb compounds.

  4. Study the Stability of a Wastewater Treatment Unit using LABVIEW

    Directory of Open Access Journals (Sweden)

    Ghainm M. Alwan

    2013-05-01

    Full Text Available This study was devoted to limit the stability conditions of the wastewater treatment unit.       LABVIEW was a powerful and versatile graphical programming language in automation control and date acquisition of the system. The on-line show that accurate and stable control responses were obtained in the present work. The actual phase plane proved to a better technique to limit the regions of the non-linear system stability compared to other theoretical techniques. Limit cycle did not appear in the present system. 

  5. A summary of studies of particle stability at RHIC

    International Nuclear Information System (INIS)

    Parzen, G.

    1992-01-01

    This paper summarizes some studies of particle stability done at RHIC. The topics reported on include: Long-term tracking and the dynamic aperture; linear coupling effects and their correction; and tune spreads in the beam due to field multipoles in the magnets and their correction

  6. Stability and quench development study in small HTSC magnet

    NARCIS (Netherlands)

    Ilyin, Y.; Vysotski, V.S.; Kiss, T.; Takeo, M.; Okamoto, H.; Irie, F.

    2001-01-01

    Stability and quench development in a HTSC magnet have been experimentally studied with the transport current in the magnet being below or above the “thermal quench current” level. The magnet was tested at both cryocooler cooling and liquid nitrogen cooling, with and without background magnetic

  7. Studies on storage stability of radurised Indian Mackerel (Rastrelliger Kanagurta)

    International Nuclear Information System (INIS)

    Ghadi, S.V.; Alur, M.D.; Venugopal, V.; Doke, S.N.; Ghosh, S.K.; Lewis, N.F.; Nadkarni, G.B.

    1977-01-01

    The present report describes the storage stability of mackerel maintained at various temperatures (0deg-20degC). The investigations include radiation-induced shifts in microflora of mackerel during storage, and time-temperature-tolerance (TTT) studies with the unirradiated and radurized mackerel. (author)

  8. A study on structural stability of bismuth titanate with lanthanum ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 3. A study on structural stability of bismuth titanate with lanthanum ... In addition, the enlarged region of Bi 4f, Bi 4d, Ti 2p, La 3d and O 1s of doping sample was clearly seen after deconvolution. Based on binding energy position, it can be unambiguously stated ...

  9. Comparative study of the influence of cement and lime stabilization ...

    African Journals Online (AJOL)

    Comparative study of the influence of cement and lime stabilization on geotechnical properties of lateritic soil derived from pegmatite in Ago-Iwoye area, southwestern Nigeria. MO Oloruntola, GO Adeyemi, OC Oduneye. Abstract. No Abstract. Journal of Mining and Geology Vol. 44 (1) 2008: pp. 95-105. Full Text:.

  10. [Study on composite stabilization of arsenic (As) contaminated soil].

    Science.gov (United States)

    Wang, Hao; Pan, Li-xiang; Zhang, Xiang-yu; Li, Meng; Song, Bao-hua

    2013-09-01

    Since the contaminated soil may contain various kinds of heavy metals, use of single chemical reagent leads to poor remediation and high cost. In this study, soil containing As, Zn, Cd was sampled, and different reagents were selected to carry out the rapid stabilization of contaminated soil. The TCLP (toxicity characteristic leaching procedure) was used to evaluate the leachate toxicity of heavy metals and the results indicated that calcium-containing, sulphur-containing and iron-containing reagents had good performance in reducing the metal mobility. The stabilization efficiency of the six reagents tested ranked in the order of CaO > Na2S > organic sulfur > Chitosan > FeSO4 > (C2H5)2NCS2Na. Two types of reagents (six reagents) were combined based on the target properties of different reagents and the stabilization efficiency was evaluated and analyzed. The results indicated that the composite reagents had higher stabilization efficiency: the efficiency of 3% FeSO4 + 5% CaO was 81.7%, 97.2% and 68.2% for As, Cd and Zn, respectively, and the efficiency of 3% CaO + 5% organic sulfur was 76.6%, 95.7% and 93.8% for these three metals, respectively. Speciation analysis was carried out in this study and the results suggested that it was the change of metals from the exchangeable state to the reduction (for inorganic reagent) or oxidation state (for organic reagent) that caused the soil stabilization and the degree of change determined the stabilization efficiency.

  11. Stability studies of colloidal silica dispersions in binary solvent mixtures

    International Nuclear Information System (INIS)

    Bean, Keith Howard

    1997-01-01

    A series of monodispersed colloidal silica dispersions, of varying radii, has been prepared. These particles are hydrophilic in nature due to the presence of surface silanol groups. Some of the particles have been rendered hydrophobic by terminally grafting n-alkyl (C 18 ) chains to the surface. The stability of dispersions of these various particles has been studied in binary mixtures of liquids, namely (i) ethanol and cyclohexane, and (ii) benzene and n-heptane. The ethanol - cyclohexane systems have been studied using a variety of techniques. Adsorption excess isotherms have been established and electrophoretic mobility measurements have been made. The predicted stability of the dispersions from D.V.L.O. calculations is compared to the observed stability. The hydrophilic silica particles behave as predicted by the calculations, with the zeta potential decreasing and the van der Waals attraction increasing with increasing cyclohexane concentration. The hydrophobic particles behave differently than expected, and the stability as a function of solvent mixture composition does not show a uniform trend. The effect of varying the coverage of C 18 chains on the surface and the effect of trace water in the systems has also been investigated. Organophilic silica dispersions in benzene - n-heptane solvent mixtures show weak aggregation and phase separation into a diffuse 'gas-like' phase and a more concentrated 'liquid-like' phase, analogous to molecular condensation processes. Calculations of the van der Waals potential as a function of solvent mixture composition show good agreement with the observed stability. Determination of the number of particles in each phase at equilibrium allows the energy of flocculation to be determined using a simple thermodynamic relationship. Finally, the addition of an AB block copolymer to organophilic silica particles in benzene n-heptane solvent mixtures has been shown to have a marked effect on the dispersion stability. This stability

  12. Solidifications/stabilization treatability study of a mixed waste sludge

    International Nuclear Information System (INIS)

    Spence, R.D.; Stine, E.F.

    1996-01-01

    The Department of Energy Oak Ridge Operations Office signed a Federal Facility Compliance Agreement with the US Environmental Protection Agency Region IV regarding mixed wastes from the Oak Ridge Reservation (ORR) subject to the land disposal restriction provisions of the Resource Conservation and Recovery Act (RCRA). This agreement required treatability studies of solidification/stabilization (S/S) on mixed wastes from the ORR. This paper reports the results of the cementitious S/S studies conducted on a waste water treatment sludge generated from biodenitrification and heavy metals precipitation. For the cementitious waste forms, the additives tested were Portland cement, ground granulated blast furnace slag, Class F fly ash, and perlite. The properties measured on the treated waste were density, free-standing liquid, unconfined compressive strength, and TCLP performance. Spiking up to 10,000, 10,000, and 4,400 mg/kg of nickel, lead, and cadmium, respectively, was conducted to test waste composition variability and the stabilization limitations of the binding agents. The results indicated that nickel, lead and cadmium were stabilized fairly well in the high pH hydroxide-carbonate- ''bug bones'' sludge, but also clearly confirmed the established stabilization potential of cementitious S/S for these RCRA metals

  13. Potential capabilities at LAMPF to study nuclei far from stability

    International Nuclear Information System (INIS)

    Talbert, W.L.; Bunker, M.E.

    1985-01-01

    Feasibility studies have shown that a He-jet activity transport line, with a target chamber placed in the LAMPF main beam line, will provide access to short-lived isotopes of a number of elements that cannot be extracted efficiently for study at any other type of on-line facility. The He-jet technique requires targets thin enough to allow a large fraction of the reaction products to recoil out of the target foils; hence, a very intense incident beam current, such as that uniquely available at LAMPF, is needed to produce yields of individual radioisotopes sufficient for detailed nuclear studies. We present the results of feasibility experiments on He-jet transport efficiency and timing. We also present estimates on availability of nuclei far from stability from both fission and spallation processes. Areas of interest for study of nuclear properties far from stability will be outlined. 17 refs

  14. Water and Regional Stability: The Nile a Case Study

    Science.gov (United States)

    2011-03-24

    Basin-Wide Study Final Report ( Dar es Salaam , Tanzania, May 2008), 2-1, 2-2. 30 Global Water Partnership Toolbox IWRM page, http...St ra te gy R es ea rc h Pr oj ec t WATER AND REGIONAL STABILITY: THE NILE A CASE STUDY BY LIEUTENANT COLONEL JOHN C. CURWEN United...in her remarks to Congress , eloquently described many of the reasons why the United States views water as strategically important1. The 2010 report

  15. A study on occlusal stability in shortened dental arches.

    Science.gov (United States)

    Sarita, Paulo T N; Kreulen, Cees M; Witter, Dick J; van't Hof, Martin; Creugers, Nico H J

    2003-01-01

    The aim of this study was to verify the hypothesis that shortened dental arches constitute a risk to occlusal stability. Using cluster samples, 725 subjects with shortened dental arches comprising intact anterior regions and zero to eight occluding pairs of posterior teeth and 125 subjects with complete dental arches were selected. Subjects with shortened dental arches were classified into eight categories according to arch length and symmetry. Parameters for occlusal stability were interdental spacing, occlusal tooth wear, occlusal contact of incisors in intercuspal position, and vertical and horizontal overlap. Additionally, tooth mobility and overeruption of unopposed teeth were assessed. Influence of independent variables (dental arch category, age, gender, and residence) on the parameters for occlusal stability was assessed by one-way ANOVA and Tukey's multiple range tests. Extreme shortened dental arches (zero to two pairs of occluding premolars) had significantly more interdental spacing, occlusal contact of incisors, and vertical overlap compared to complete dental arches. Occlusal wear and prevalence of mobile teeth were highest in these categories. The category with three to four occluding premolars had significantly more interdental spacing and, for the older age group, more anterior teeth in occlusal contact compared to complete dental arches. Age was consistently associated with increased changes in occlusal integrity. Signs of increased risk to occlusal stability seemed to occur in extreme shortened dental arches, whereas no such evidence was found for intermediate categories of shortened dental arches.

  16. The preformulation stability studies of a proline prodrug of methotrexate.

    Science.gov (United States)

    Stephenson, Ann; Wu, Zhiqian; Yuan, Xudong

    2012-07-01

    In order to reduce toxicity of methotrexate and improve bioavailability, permeability, and explore other delivery routes, a proline prodrug of methotrexate was synthesized and preformulation stability studies were conducted under accelerated conditions to assess compound liability and possible conversion to the parent drug. Forced degradation studies showed that the prodrug will degrade in the presence of water, acid, and heat (70 °C), generating the parent compound methotrexate. It was also found that this conversion is temperature dependent. In addition, the prodrug is extremely light and oxidative labile. Therefore, future formulation studies should be light protected and stabilized by a suitable antioxidant. It was also found that the prodrug is stable in the HPLC diluent, consisting of water and acetonitrile; stored bench-top and protected from light for up to two weeks.

  17. Stability studies on florfenicol using developed derivative spectrophotometric methods.

    Science.gov (United States)

    Elimam, M M; Shantier, S W; Gadkariem, E A; Mohamed, M A; Osman, Z

    2017-01-01

    This study aims to investigate the stability of florfenicol using previously developed derivative spectrophotometric methods (D 1 and D 2 ). The studied stability-indicating pararmeters included alkali (NaOH, 1M), acid (HCl, 1M), pH changes (buffer pH 2.2-11), temperature (80°C and 100°C at pH 10) and light. A constructed pH profile for the drug degradation rate revealed a significant effect of pH on the drug stability between pH ranges 8 and 11. The obtained profile indicated first order dependence of K obs on [OH - ]. Arrhenius plot at pH 10 was found linear at temperatures 80°C and 100°C with estimated activation energy of 19.35kcal/mol. The calculated rate constant (K obs ), t ½ and t 90 at 25°C were found to be 1.8×10 -3 h, 385h and 58.3h, respectively. The photostability of florfenicol was also studied by exposing the drug solution to direct sunlight during mid-day time. The obtained results reflected the instability of florfenicol under the study conditions. Copyright © 2016 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  18. Polyaniline Conducting Electroactive Polymers Thermal and Environmental Stability Studies

    OpenAIRE

    Ansari, Reza; Keivani, M. B.

    2006-01-01

    In the current studies, polyaniline (PANi) was prepared both chemical and electrochemically in the presence of different bronsted acids from aqueous solutions. The effect of thermal treatment on electrical conductivity, and thermal stability of the PANi conducting polymers were investigated using 4-point probe and TGA techniques respectively. It was found that polymer prepared by CV method is more thermally stable than those prepared by the other electrochemical techniques. In this paper we h...

  19. Characterization and stability studies of emulsion systems containing pumice

    Directory of Open Access Journals (Sweden)

    Marilene Estanqueiro

    2014-04-01

    Full Text Available Emulsions are the most common form of skin care products. However, these systems may exhibit some instability. Therefore, when developing emulsions for topical application it is interesting to verify whether they have suitable physical and mechanical characteristics and further assess their stability. The aim of this work was to study the stability of emulsion systems, which varied in the proportion of the emulsifying agent cetearyl alcohol (and sodium lauryl sulfate (and sodium cetearyl sulfate (LSX, the nature of the oily phase (decyl oleate, cyclomethicone or dimethicone and the presence or absence of pumice (5% w/w. While maintaining the samples at room temperature, rheology studies, texture analysis and microscopic observation of formulations with and without pumice were performed. Samples were also submitted to an accelerated stability study by centrifugation and to a thermal stress test. Through the testing, it was found that the amount of emulsifying agent affects the consistency and textural properties such as firmness and adhesiveness. So, formulations containing LSX (5% w/w and decyl oleate or dimethicone as oily phase had a better consistency and remained stable with time, so exhibited the best features to be used for skin care products.

  20. Study of the Alvarez linac stabilized with post-couplers

    International Nuclear Information System (INIS)

    Machida, Shinji.

    1985-11-01

    A model of Alvarez linac equipped with post-couplers was constructed. The field distribution and the resonant frequency of the accelerating mode were measured to study its properties against perturbations such as manufacturing errors of the tank. The experimental results were compared with an analysis using equivalent circuits. The mechanism of the stabilization was confirmed by the analysis and the following remarkable information about this structure were obtained: Post-couplers have an effect to distort the field distribution as well as to stabilize it depending upon the length of post-couplers inserted into the tank. Furthermore, the role of tabs which are used to tilt the field distribution and the difference between a post-coupled structure and a multi-stem structure are investigated with the analysis of equivalent circuits. (author)

  1. [Genetic stability study on autotetraploid plant of Dioscorea zingiberensis].

    Science.gov (United States)

    Huang, He-Ping; Gao, Shan-Lin; Huang, Lu-Qi; Wang, Dian-Lei; Huang, Peng

    2014-03-01

    To study the genetic stability of autotetraploid plant of Dioscorea zingiberensis. The chromosome of root-tip was determined by photomicroscope, and the agronomic characters were observed in the period of stable growth. The protein content was determined and the experiment of protein polyacrylamide gel electrophoresis was carried out. Furthemore, the diosgenin content was determined and compared. The chromosome number of autotetraploid plantlet was 2n = 4x = 40. The agronomic characters showed typical autotetraploid characteristics. The contents of diosgenin and protein of autotetraploid were higher than that of the diploid. The protein electrophoresis bands of all the lines were similar. The experiment confirmed that the autotetraploid plant of Dioscorea zingiberensis, which was artificially induced, had good genetic stability. It lays the foundation for the polyploid breeding to develop superior varieties of Dioscorea zingiberensis.

  2. Orthodontic treatment stability predictors: A retrospective longitudinal study.

    Science.gov (United States)

    de Bernabé, Paloma González-Gil; Montiel-Company, José María; Paredes-Gallardo, Vanessa; Gandía-Franco, Jose Luis; Bellot-Arcís, Carlos

    2017-03-01

    To examine medium- to long-term orthodontic treatment stability and its possible association with certain variables. In a retrospective longitudinal study of 70 postretention patients, the Peer Assessment Rating (PAR) index was measured at the start (T1) and end (T2) of treatment and between 4 and 10 years afterwards (T3). The stability was considered absolute when the T2 and T3 values were identical and relative when the difference was within the ±5 range. Among the 70 patients, 65.8% were female and 34.2% were male. Their mean age was 14.5 years. The mean treatment length was 2.4 years. The mean retention phase was 3.3 years. The mean pre- and posttreatment PAR scores were 29.8 (T1) and 6.3 (T2). The mean T1-T2 difference was 23.6. The mean T2-T3 difference was -0.39. Within the study, 7.1% presented absolute stability and 68.6% presented relative stability. Lower anterior segment alignment and overbite were the most unstable occlusal features and tended to worsen. Fixed retainer (odds ratio [OR] 0.31; 95% confidence interval [CI] 0.10-0.98) as a protective factor and years without retention (OR 1.32; 95% CI 1.03-1.68) as a risk factor are predictor variables of instability in the case of lower anterior segment alignment. The PAR value at the end of treatment (OR 1.29; 95% CI 1.08-1.54) and extractions (OR 4.76; 95% CI 1.05-21.6) before treatment are predictors for midline instability.

  3. Bioengineering case studies sustainable stream bank and slope stabilization

    CERN Document Server

    Goldsmith, Wendi; McCullah, John

    2014-01-01

    This unique volume describes and evaluates 30 projects from across the United States where bio-stabilization was employed to address a detrimental naturally occurring process or byproduct of the built environment. Bio-stabilization (or soil bioengineering) refers to the use of plant materials, primarily live cuttings, arranged in the ground in different arrays to reinforce soils and protect upland slopes and/or stream banks against surficial erosion and shallow slope failures. Examples included in the collection represent different regions of the country and their specific conditions and challenges. Each project is illustrated with a number of distinctive photographs to support the reader's understanding and showcase the wide scope of projects and techniques presented. This book also: ·         Presents a range of well-documented case studies on key techniques and best practices for bio-stabilization projects ·         Emphasizes evaluation and comparison of different techniques and challeng...

  4. Stratigraphic and microfossil evidence for a 4500-year history of Cascadia subduction zone earthquakes and tsunamis at Yaquina River estuary, Oregon, USA

    Science.gov (United States)

    Graehl, Nicholas A; Kelsey, Harvey M.; Witter, Robert C.; Hemphill-Haley, Eileen; Engelhart, Simon E.

    2015-01-01

    The Sallys Bend swamp and marsh area on the central Oregon coast onshore of the Cascadia subduction zone contains a sequence of buried coastal wetland soils that extends back ∼4500 yr B.P. The upper 10 of the 12 soils are represented in multiple cores. Each soil is abruptly overlain by a sandy deposit and then, in most cases, by greater than 10 cm of mud. For eight of the 10 buried soils, times of soil burial are constrained through radiocarbon ages on fine, delicate detritus from the top of the buried soil; for two of the buried soils, diatom and foraminifera data constrain paleoenvironment at the time of soil burial.We infer that each buried soil represents a Cascadia subduction zone earthquake because the soils are laterally extensive and abruptly overlain by sandy deposits and mud. Preservation of coseismically buried soils occurred from 4500 yr ago until ∼500–600 yr ago, after which preservation was compromised by cessation of gradual relative sea-level rise, which in turn precluded drowning of marsh soils during instances of coseismic subsidence. Based on grain-size and microfossil data, sandy deposits overlying buried soils accumulated immediately after a subduction zone earthquake, during tsunami incursion into Sallys Bend. The possibility that the sandy deposits were sourced directly from landslides triggered upstream in the Yaquina River basin by seismic shaking was discounted based on sedimentologic, microfossil, and depositional site characteristics of the sandy deposits, which were inconsistent with a fluvial origin. Biostratigraphic analyses of sediment above two buried soils—in the case of two earthquakes, one occurring shortly after 1541–1708 cal. yr B.P. and the other occurring shortly after 3227–3444 cal. yr B.P.—provide estimates that coseismic subsidence was a minimum of 0.4 m. The average recurrence interval of subduction zone earthquakes is 420–580 yr, based on an ∼3750–4050-yr-long record and seven to nine interearthquake

  5. Mechanism study on stability enhancement of adefovir dipivoxil by cocrystallization: Degradation kinetics and structure-stability correlation.

    Science.gov (United States)

    Lin, Rui-Zhen; Sun, Peng-Jie; Tao, Qian; Yao, Jia; Chen, Jia-Mei; Lu, Tong-Bu

    2016-03-31

    The purpose of this study is to determine the mechanism by which cocrystallization can enhance the stability of adefovir dipivoxil (AD), a diester prodrug of adefovir with known chemical stability problem. Three multi-component crystals of AD with biologically safe coformers, including gallic acid cocrystal hydrate (1:1:1), salicylate salt (1:1), and maleate salt (1:1) were prepared and characterized by thermal analysis, infrared spectroscopy, powder and single crystal X-ray diffraction. DVS measurements and stability tests were applied to evaluate the stability. The new crystalline phases exhibit improved stability compared to pure drug in the order AD gallic acid cocrystal>AD maleate>AD salicylate>AD form I. Degradation kinetics and structure-stability correlation studies demonstrate that the stability enhancement mechanism by cocrystallization involves (1) inhibition of hydrolysis of AD by replacement of drug-drug homosynthons by stronger drug-coformer heterosynthons at adenine fragments; (2) suppression of dimerization of AD by separation of adenine fragments by inserting coformers in crystal lattices; (3) further reducing rates of hydrolysis by forming hydrogen bonds with hydrate water at phosphoryl fragments. This study has important implications for use of cocrystallization approach to some easily degradable drugs in pharmaceutical. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Experimental and theoretical studies of the colloidal stability of nanoparticles-a general interpretation based on stability maps.

    Science.gov (United States)

    Segets, Doris; Marczak, Renata; Schäfer, Stefan; Paula, Carolin; Gnichwitz, Jan-Frederik; Hirsch, Andreas; Peukert, Wolfgang

    2011-06-28

    The current work addresses the understanding of the stabilization of nanoparticles in suspension. Specifically, we study ZnO in ethanol for which the influence of particle size and reactant ratio as well as surface coverage on colloidal stability in dependence of the purification progress was investigated. The results revealed that the well-known ζ-potential determines not only the colloidal stability but also the surface coverage of acetate groups bound to the particle surface. The acetate groups act as molecular spacers between the nanoparticles and prevent agglomeration. Next to DLVO calculations based on the theory of Derjaguin, Landau, Verwey and Overbeek using a core-shell model we find that the stability is better understood in terms of dimensionless numbers which represent attractive forces as well as electrostatic repulsion, steric effects, transport properties, and particle concentration. Evaluating the colloidal stability in dependence of time by means of UV-vis absorption measurements a stability map for ZnO is derived. From this map it becomes clear that the dimensionless steric contribution to colloidal stability scales with a stability parameter including dimensionless repulsion and attraction as well as particle concentration and diffusivity of the particles according to a power law with an exponent of -0.5. Finally, we show that our approach is valid for other stabilizing molecules like cationic dendrons and is generally applicable for a wide range of other material systems within the limitations of vanishing van der Waals forces in refractive index matched situations, vanishing ζ-potential and systems without a stabilizing shell around the particle surface.

  7. Stability study for matching in laser driven plasma acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, A.R., E-mail: andrea.rossi@mi.infn.it [INFN - MI, via Celoria 16, 20133 Milan (Italy); Anania, M.P. [INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Bacci, A. [INFN - MI, via Celoria 16, 20133 Milan (Italy); Belleveglia, M.; Bisesto, F.G.; Chiadroni, E. [INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Cianchi, A. [Tor Vergata University, Physics Department, via della Ricerca Scientifica 1, 00133 Rome (Italy); INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Curcio, A.; Gallo, A.; Di Giovenale, D.; Di Pirro, G.; Ferrario, M. [INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Marocchino, A.; Massimo, F. [La Sapienza University, SBAI Department, via A. Scarpa 14, 00161 Rome (Italy); Mostacci, A. [La Sapienza University, SBAI Department, via A. Scarpa 14, 00161 Rome (Italy); INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Petrarca, M. [La Sapienza University, SBAI Department, via A. Scarpa 14, 00161 Rome (Italy); Pompili, R. [INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); Serafini, L. [INFN - MI, via Celoria 16, 20133 Milan (Italy); Tomassini, P. [University of Milan, Physics Department, via Celoria 16, 20133 Milan (Italy); Vaccarezza, C. [INFN - LNF, v.le E. Fermi, 00044 Frascati (Italy); and others

    2016-09-01

    In a recent paper [14], a scheme for inserting and extracting high brightness electron beams to/from a plasma based acceleration stage was presented and proved to be effective with an ideal bi-Gaussian beam, as could be delivered by a conventional photo-injector. In this paper, we extend that study, assessing the method stability against some jitters in the properties of the injected beam. We find that the effects of jitters in Twiss parameters are not symmetric in results; we find a promising configuration that yields better performances than the setting proposed in [14]. Moreover we show and interpret what happens when the beam charge profiles are modified.

  8. Linear and nonlinear kinetic-stability studies in tokamaks

    International Nuclear Information System (INIS)

    Tang, W.M.; Chance, M.S.; Chen, L.; Krommes, J.A.; Lee, W.W.; Rewoldt, G.

    1982-09-01

    This paper presents results of theoretical investigations on important linear kinetic properties of low frequency instabilities in toroidal systems and on nonlinear processes which could significantly influence their impact on anomalous transport. Analytical and numerical methods and also particle simulations have been employed to carry out these studies. In particular, the following subjects are considered: (1) linear stability analysis of kinetic instabilities for realistic tokamak equilibria and the application of such calculations to the PDX and PLT tokamak experiments including the influence of a hot beam-ion component; (2) determination of nonlinearly saturated, statistically steady states of three interacting drift modes; and (3) gyrokinetic particle simulation of drift instabilities

  9. [Study on stability of curcumine, demethoxycurcumin and bisdemethoxycurcumin].

    Science.gov (United States)

    Han, Gang; Cui, Jing-jing; Bi, Rui; Zhao, Lin-lin; Zhang, Wei-guo

    2008-11-01

    To investigate the stability of curcumin, demethoxycurcumin and bisdemethoxycurcumin in different buffer solution. To determine concentration of curcumin by HPLC when added curcumin, demethoxycurcumin and bisdemethoxycurcumin into the buffer solution the equation of degradation was established. The sequence of stability are bisdemethoxycurcumin > or = demethoxycurcumin > or =curcumin at the same condition. The demethoxycurcumin can stabilize curcumin more strong than the others. The demethoxycurcumin is a nature stabilizing agent for curcumin.

  10. Stability Studies of a Mixture of Paracetamol and Ascorbic Acid ...

    African Journals Online (AJOL)

    Purpose: To determine the effect of the temperature of water used for the preparation of paracetamol and ascorbic acid mixture on its stability, as well as to assess the influence of humidity on the stability of single components and their mixtures. Methods: The stability of the mixtures in aqueous medium was evaluated with ...

  11. Is lesional stability in vitiligo more important than disease stability for performing surgical interventions? results from a multicentric study

    Directory of Open Access Journals (Sweden)

    Imran Majid

    2016-01-01

    Full Text Available Background: Ensuring stability of the disease process is essential for undertaking surgical intervention in vitiligo. However, there is no consensus regarding the minimum duration of stability or the relative importance of disease and lesional stability in selecting patients for vitiligo grafting. Aim: This multicentric study aims to assess the relative importance of lesional and disease stability on selecting patients for vitiligo grafting. Materials and Methods: One hundred seventy patients were recruited into the study and divided into two groups: Group A with lesional stability of >1 year but overall disease stability of only 6-11 months and Group B with overall disease stability of >1 year. Patients underwent either tissue or cellular vitiligo grafting on the selected lesions and the repigmentation achieved was scored from 0 (no repigmentation to 6 (100% repigmentation. Repigmentation achieved on different sites of the body was compared between the two groups. Adverse effects at both the donor and the recipient sites were also compared. Results: Of the 170 patients who were enrolled, 82 patients were placed in Group A and 88 patients in Group B. Average repigmentation achieved (on scale of 0 to 6 was 3.8 and 4.04 in Group A and Group B, respectively. In Group A, ≥90% repigmentation was achieved in 36.6% (30/82 patients, while 37.5% (33/88 achieved similar results in Group B. Additionally, 47.6% (39/82 and 53.4% (47/88 of cases achieved partial repigmentation in Group A and Group B, respectively. Perigraft halo was the commonest adverse effect observed in both groups. Statistical analysis revealed no significant differences between the two groups with respect to the repigmentation achieved or adverse effects observed. Repigmentation achieved was the best on the face and neck area, while acral areas responded the least. Conclusions: Lesional stability seems to be as relevant as the overall disease stability in selecting patients for

  12. Study of nonlinear system stability using eigenvalue analysis: Gyroscopic motion

    Science.gov (United States)

    Shabana, Ahmed A.; Zaher, Mohamed H.; Recuero, Antonio M.; Rathod, Cheta

    2011-11-01

    orientation parameters and also to shed light on the important issue of using the eigenvalue analysis in the study of MBS stability. The validity of using the eigenvalue analysis based on the linearization of the nonlinear equations of motion in the study of the stability of railroad vehicle systems, which have known critical speeds, is examined. It is shown that such an eigenvalue analysis can lead to wrong conclusions regarding the stability of nonlinear systems.

  13. Stability study of sodium colistimethate-loaded lipid nanoparticles.

    Science.gov (United States)

    Moreno-Sastre, M; Pastor, M; Esquisabel, A; Sans, E; Viñas, M; Bachiller, D; Pedraz, J L

    2016-11-01

    In the last decades, the encapsulation of antibiotics into nanoparticulate carriers has gained increasing attention for the treatment of infectious diseases. Sodium colistimethate-loaded solid lipid nanoparticles (Colist-SLNs) and nanostructured lipid carriers (Colist-NLCs) were designed aiming to treat the pulmonary infection associated to cystic fibrosis patients. The nanoparticles were freeze-dried using trehalose as cryoprotectant. The stability of both nanoparticles was analysed over one year according to the International Conference of Harmonisation (ICH) guidelines by determining the minimum inhibitory concentration (MIC) against clinically isolated Pseudomonas aeruginosa strains and by studying their physico-chemical characteristics. The results showed that Colist-SLNs lost their antimicrobial activity at the third month; on the contrary, the antibacterial activity of Colist-NLCs was maintained throughout the study within an adequate range (MIC ≤16 μg/mL). In addition, Colist-NLCs exhibited suitable physico-chemical properties at 5 °C and 25 °C/60% relative humidity over one year. Altogether, Colist-NLCs proved to have better stability than Colist-SLNs.

  14. Biophysical Studies of Function and Stability in Adenylosuccinate Lyase

    Science.gov (United States)

    Ray, Stephen; Duval, Nathan; Wilkinson, Terry, II; Shaheen, Sean; Ghosh, Kinshuk; Patterson, David

    2012-10-01

    Adenylosuccinate Lyase (ADSL) is a homotetrameric protein with four active sites that accommodate two reactions in the de novo purine biosynthesis pathway. It catalyzes the conversion of SAICAR to AICAR and AMPS to AMP. Point mutations in the gene encoding the protein ADSL lead to ADSL deficiency, a disorder characterized by serious neurological and physiological symptoms. Two leading hypotheses regarding the pathogenesis are ``Loss of Function'' or ``Gain in Toxic Function.'' These hypotheses can be related to the reduction of either the enzyme kinetics or the stability of the tetramer structure. Enzymatic studies can be used to provide a quantitative measure of the extent to which the enzyme acts on its designated substrates, SAICAR and AMPS. Recent kinetic studies have measured activity only on the substrates independently. Here we present characterization of enzyme kinetics for the biophysically interesting and physiologically relevant case where two substrates exhibit competitive binding to the enzyme, for both wild type and disease causing mutants of ADSL. Preliminary data suggest equivalent specific activities may be necessary to suppress severe phenotypes from expressing. Additionally, we will present results on the role of mutations on the thermodynamic stability of the enzyme. We will discuss thermodynamic analysis that gives a direct quantitative measure of the propensity of formation of folded and unfolded states of the protein, which influence the functionality of the protein and may also influence aggregation.

  15. Thermal Stabilization study of polyacrylonitrile fiber obtained by extrusion

    Directory of Open Access Journals (Sweden)

    Robson Fleming Ribeiro

    2015-12-01

    Full Text Available A low cost and environmental friendly extrusion process of the Polyacrylonitrile (PAN polymer was viabilized by using the 1,2,3-propanetriol (glycerol as a plasticizer. The characterization of the fibers obtained by this process was the object of study in the present work. The PAN fibers were heat treated in the range of 200 °C to 300 °C, which is the temperature range related to the stabilization/oxidation step. This is a limiting phase during the carbon fiber processing. The characterization of the fibers was made using infrared spectroscopy, thermal analysis and microscopy. TGA revealed that the degradation of the extruded PAN co-VA fibers between 250 °C and 350 °C, corresponded to a 9% weight loss to samples analyzed under oxidizing atmosphere and 18% when the samples were analyzed under inert atmosphere. DSC showed that the exothermic reactions on the extruded PAN co-VA fibers under oxidizing synthetic air was broader and the cyclization started at a lower temperature compared under inert atmosphere. Furthermore, FT-IR analysis correlated with thermal anlysis showed that the stabilization/oxidation process of the extruded PAN fiber were coherent with other works that used PAN fibers obtained by other spinning processes.

  16. Novel self-assembling nanogels: stability and lyophilisation studies.

    Science.gov (United States)

    Daoud-Mahammed, S; Couvreur, P; Gref, R

    2007-03-06

    The stability of new supramolecular nanoassemblies (nanogels), based on the association of a hydrophobically modified dextran (MD) and a beta-cyclodextrin polymer (pbetaCD), has been studied by two complementary methods: (i) size measurements and (ii) turbidity experiments using a Turbiscan optical analyser. Nanogels of about 120-150nm were obtained whatever the concentration of the two polymer solutions. At low concentrations, the suspensions presented little mean diameter variations upon storage. However, the concentrated ones tended to destabilize and their mean diameter increased upon time. Size measurements and Turbiscan investigations have demonstrated that destabilization in the MD-pbetaCD nanogel suspension was only due to particle aggregation and/or fusion, as no sedimentation or creaming occurred. The destabilization of MD-pbetaCD suspensions led to the formation of a highly viscous phase, as a final state. Moreover, the two methods have shown that aggregation and/or fusion phenomena were more pronounced in the concentrated MD-pbetaCD suspensions than in the diluted ones. The stability of MD-pbetaCD suspensions could be improved by their storage at 4 degrees C. Finally, freeze-drying was found to be a convenient method for the long-time storage of MD-pbetaCD nanoassemblies.

  17. Stability study: Transparent conducting oxides in chemically reactive plasmas

    Science.gov (United States)

    Manjunatha, Krishna Nama; Paul, Shashi

    2017-12-01

    Effect of plasma treatment on transparent conductive oxides (TCOs) including indium-doped tin oxide (ITO), fluorine-doped tin oxide (FTO) and aluminium-doped zinc oxide (AZO) are discussed. Stability of electrical and optical properties of TCOs, when exposed to plasma species generated from gases such as hydrogen and silane, are studied extensively. ITO and FTO thin films are unstable and reduce to their counterparts such as Indium and Tin when subjected to plasma. On the other hand, AZO is not only stable but also shows superior electrical and optical properties. The stability of AZO makes it suitable for electronic applications, such as solar cells and transistors that are fabricated under plasma environment. TCOs exposed to plasma with different fabrication parameters are used in the fabrication of silicon nanowire solar cells. The performance of solar cells, which is mired by the plasma, fabricated on ITO and FTO is discussed with respect to plasma exposure parameters while showing the advantages of using chemically stable AZO as an ideal TCO for solar cells. Additionally, in-situ diagnostic tool (optical emission spectroscopy) is used to monitor the deposition process and damage caused to TCOs.

  18. Contribution to the study of superconductor thermal stability

    International Nuclear Information System (INIS)

    Meuris, Chantal.

    1982-06-01

    The fundamental problem consists in ensuring, a priori, that transitions from the superconducting state to the normal resistive state, created by thermal disturbances, resorb spontaneously. An analysis of the validity limits of the criteria generally used leads to the definition of a certain number of unsolved problems raised by two particular configurations linked to the present technology of large superconducting magnets. The thermal stability is studied in relation to disturbances leading to a dispersion of heat in the conductor. The first configuration is representative of that of magnets with cooling channels defined transversely to the conductor and communicating with the main helium source (for example toroidal coil of Tore Supra). The uneven distribution of coolant along the conductor, due to the presence of the insulating supports marking the channels, leads to possible states for the conductor which were not anticipated till now. A theoretical study is developed of the stable and unstable stationary states of the conductor and the respective attraction fields of the stable states. A complete digital analysis of the dynamics of the state of the disturbed system is then made. This digital simulation is compared with the experimental results. The second configuration relates to the case of a conductor cooled by a limited volume of superfluid helium, for example a cable with internal cooling by static superfluid helium. An analysis of the cooling medium enables a theoretical relation to be established between the usable enthalpy and the time distribution of the thermal disturbance. This culminates in a fresh stability and dimensioning criterion of the cooling system with respect to the type of disturbances. An experimental study confirms this theory [fr

  19. Green Tea Leaves Extract: Microencapsulation, Physicochemical and Storage Stability Study.

    Science.gov (United States)

    Zokti, James A; Sham Baharin, Badlishah; Mohammed, Abdulkarim Sabo; Abas, Faridah

    2016-07-26

    Green tea polyphenols have been reported to possess many biological properties. Despite the many potential benefits of green tea extracts, their sensitivity to high temperature, pH and oxygen is a major disadvantage hindering their effective utilization in the food industry. Green tea leaves from the Cameron Highlands Malaysia were extracted using supercritical fluid extraction (SFE). To improve the stability, green tea extracts were encapsulated by spray-drying using different carrier materials including maltodextrin (MD), gum arabic (GA) and chitosan (CTS) and their combinations at different ratios. Encapsulation efficiency, total phenolic content and antioxidant capacity were determined and were found to be in the range of 71.41%-88.04%, 19.32-24.90 (g GAE/100 g), and 29.52%-38.05% respectively. Further analysis of moisture content, water activity, hygroscopicity, bulk density and mean particles size distribution of the microparticles were carried out and the results ranged from; 2.31%-5.11%, 0.28-0.36, 3.22%-4.71%, 0.22-0.28 g/cm³ and 40.43-225.64 µm respectively. The ability of the microparticles to swell in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was determined as 142.00%-188.63% and 207.55%-231.77%, respectively. Release of catechin polyphenol from microparticles in SIF was higher comparable to that of SGF. Storage stability of encapsulated catechin extracts under different temperature conditions was remarkably improved compared to non-encapsulated extract powder. This study showed that total catechin, total phenolic content (TPC) and antioxidant activity did not decrease significantly (p ≥ 0.05) under 4 °C storage conditions. The half-life study results were in the range of 35-60, 34-65 and 231-288 weeks at storage temperatures of 40 °C, 25 °C and 4 °C respectively, therefore, for improved shelf-life stability we recommend that microparticles should be stored at temperatures below 25 °C.

  20. Green Tea Leaves Extract: Microencapsulation, Physicochemical and Storage Stability Study

    Directory of Open Access Journals (Sweden)

    James A. Zokti

    2016-07-01

    Full Text Available Green tea polyphenols have been reported to possess many biological properties. Despite the many potential benefits of green tea extracts, their sensitivity to high temperature, pH and oxygen is a major disadvantage hindering their effective utilization in the food industry. Green tea leaves from the Cameron Highlands Malaysia were extracted using supercritical fluid extraction (SFE. To improve the stability, green tea extracts were encapsulated by spray-drying using different carrier materials including maltodextrin (MD, gum arabic (GA and chitosan (CTS and their combinations at different ratios. Encapsulation efficiency, total phenolic content and antioxidant capacity were determined and were found to be in the range of 71.41%–88.04%, 19.32–24.90 (g GAE/100 g, and 29.52%–38.05% respectively. Further analysis of moisture content, water activity, hygroscopicity, bulk density and mean particles size distribution of the microparticles were carried out and the results ranged from; 2.31%–5.11%, 0.28–0.36, 3.22%–4.71%, 0.22–0.28 g/cm3 and 40.43–225.64 µm respectively. The ability of the microparticles to swell in simulated gastric fluid (SGF and simulated intestinal fluid (SIF was determined as 142.00%–188.63% and 207.55%–231.77%, respectively. Release of catechin polyphenol from microparticles in SIF was higher comparable to that of SGF. Storage stability of encapsulated catechin extracts under different temperature conditions was remarkably improved compared to non-encapsulated extract powder. This study showed that total catechin, total phenolic content (TPC and antioxidant activity did not decrease significantly (p ≥ 0.05 under 4 °C storage conditions. The half-life study results were in the range of 35–60, 34–65 and 231–288 weeks at storage temperatures of 40 °C, 25 °C and 4 °C respectively, therefore, for improved shelf-life stability we recommend that microparticles should be stored at temperatures below 25 °C.

  1. Stability studies on refined soybean oil stored in various conditions

    International Nuclear Information System (INIS)

    Arawande, J.O.; Amoo, I.A.

    2008-01-01

    The 12 months stability study of freshly produced refined soybean oil revealed that refined soybean oil stored in plastic containers in dark was more hydrolytically and oxidatively stable than that stored in other containers in light condition. There was no significant difference at P < 0.05 in free fatty acids and acid value of oil stored under light and dark conditions in tin and glass containers but there was significant difference at P < 0.05 in peroxide value of oil stored in light and dark conditions in all the storage containers. Light increased the degree of oxidative rancidity of refined soybean oil, the most in tin containers, followed by glass containers and the least in plastic containers. (author)

  2. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    Energy Technology Data Exchange (ETDEWEB)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J. [Pacific Northwest Lab., Richland, WA (United States); Nass, R. [Nuclear Fuel Services, Inc. (United States)

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage.

  3. Mechanical Stability Study for Integrable Optics Test Accelerator at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    McGee, Mike [Fermilab; Andrews, Richard [Fermilab; Carlson, Kermit [Fermilab; Leibfritz, Jerry [Fermilab; Nobrega, Lucy [Fermilab; Valishev, Alexander [Fermilab

    2016-07-01

    The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p⁺) diagnostic test ring. A heavy low frequency steel floor girder is proposed as the primary tier for IOTA device component support. Two design lengths; (8) 4 m and (2) 2.8 m long girders with identical cross section completely encompass the ring. This study focuses on the 4 m length girder and the development of a working prototype. Hydrostatic Level Sensor (HLS), temperature, metrology and fast motion measurements characterize the anticipated mechanical stability of the IOTA ring.

  4. Stability analysis and support study on surroundings of finishing cut

    Energy Technology Data Exchange (ETDEWEB)

    Xu, J.; Miao, X.; Lu, A.; Xing, C. [CUMT, Jiangsu (China). College of Mineral and Energy Resources

    2003-09-01

    By means of finishing cut the trackless rubber-tried vehicle can directly go to the working face to remove the equipment. It can promote the efficiency in removing the equipment. Because of the finishing cut continuously affected by the dynamic pressure of face, it is important to find the reasonable position of the finishing cut and the proportion support. Based on the study of the ground pressure and the moving law of overlying strata during the terminal mining in sublevel caving face, the optimal position and the proportion support way of finishing cut were obtained using experiment with analog simulation and numerical simulation. This method can keep the stability for the surroundings of the finishing cut and lay the foundation for finishing the face quickly and safely. The engineering practice shows this technique is efficient and the significant social and economy benefit is obtained. 7 refs.,11 figs.

  5. SiPM Gain Stabilization Studies for Adaptive Power Supply

    CERN Document Server

    AUTHOR|(CDS)2074257; Zalieckas, Justas; Cvach, Jaroslav; Kvasnicka, Jiri; Polak, Ivo

    2016-01-01

    We present herein gain stabilization studies of SiPMs using a climate chamber at CERN. We present results for four detectors not tested before, three from Hamamatsu and one from KETEK. Two of the Hamamatsu SiPMs are novel sensors with trenches that reduce cross talk. We use an improved readout system with a digital oscilloscope controlled with a dedicated LabView program. We improved and automized the analysis to deal with large datasets. We have measured the gain-versus-bias-voltage dependence at fixed temperature and gain-versus-temperature dependence at fixed bias voltage to determine the bias voltage dependence on temperature $V(T)$ for stable gain. We show that the gain remains stable to better than $\\pm 0.5\\%$ in the $20^\\circ \\rm C - 30^\\circ C$ temperature range if the bias voltage is properly adjusted with temperature.

  6. Plutonium Finishing Plant. Interim plutonium stabilization engineering study

    International Nuclear Information System (INIS)

    Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J.; Nass, R.

    1995-08-01

    This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage

  7. Experimental studies of flame stability limits of biogas flame

    International Nuclear Information System (INIS)

    Dai Wanneng; Qin Chaokui; Chen Zhiguang; Tong Chao; Liu Pengjun

    2012-01-01

    Highlights: ► Premixed biogas flame stability for RTBs was studied on different conditions. ► An unusual “float off” phenomenon was observed. ► Decrease of port diameter or gas temperature or methane content motivates lifting. ► Increase of methane content or gas temperature or port diameter motivates yellow tipping. ► Lifting curves become straight lines when semi-logarithmic graph paper is applied. - Abstract: Flame stability of premixed biogas flame for Reference Test Burner (RTB) was investigated. In this study, six kinds of test gases were used to simulate biogas in which CO 2 volume fraction varied from 30% to 45%. A series of experiments were conducted on two RTBs with different port diameters and at different outlet unburned mixture temperatures. It was found that the lifting and yellow tipping limits show similar trends regardless of the biogas components, port diameters and mixture temperatures. A “float off” phenomenon could be observed at low gas flow rate and low primary air ratio. Low mixture temperature, small ports and high CO 2 concentration in biogas can lead to the unstable condition of “float off”. The lifting limits are enhanced with an increase of port diameter or mixture temperature and with a decrease of CO 2 concentration. The yellow tipping limits are extended with an increase of CO 2 concentration and with a decrease of mixture temperature or port diameter. In addition, the lifting limit curve becomes a straight line when semi-logarithmic graph paper is applied. The intercept increases with a decrease of the CO 2 concentration in biogas and with an increase of port diameter or gas temperature.

  8. Studies on dispersive stabilization of porous media flows

    Energy Technology Data Exchange (ETDEWEB)

    Daripa, Prabir, E-mail: prabir.daripa@math.tamu.edu; Gin, Craig [Department of Mathematics, Texas A& M University, College Station, Texas 77843 (United States)

    2016-08-15

    Motivated by a need to improve the performance of chemical enhanced oil recovery (EOR) processes, we investigate dispersive effects on the linear stability of three-layer porous media flow models of EOR for two different types of interfaces: permeable and impermeable interfaces. Results presented are relevant for the design of smarter interfaces in the available parameter space of capillary number, Peclet number, longitudinal and transverse dispersion, and the viscous profile of the middle layer. The stabilization capacity of each of these two interfaces is explored numerically and conditions for complete dispersive stabilization are identified for each of these two types of interfaces. Key results obtained are (i) three-layer porous media flows with permeable interfaces can be almost completely stabilized by diffusion if the optimal viscous profile is chosen, (ii) flows with impermeable interfaces can also be almost completely stabilized for short time, but become more unstable at later times because diffusion flattens out the basic viscous profile, (iii) diffusion stabilizes short waves more than long waves which leads to a “turning point” Peclet number at which short and long waves have the same growth rate, and (iv) mechanical dispersion further stabilizes flows with permeable interfaces but in some cases has a destabilizing effect for flows with impermeable interfaces, which is a surprising result. These results are then used to give a comparison of the two types of interfaces. It is found that for most values of the flow parameters, permeable interfaces suppress flow instability more than impermeable interfaces.

  9. Surgical stabilization of internal pneumatic stabilization? A prospective randomized study of management of severe flail chest patients.

    Science.gov (United States)

    Tanaka, Hideharu; Yukioka, Tetsuo; Yamaguti, Yoshihiro; Shimizu, Syoichiro; Goto, Hideaki; Matsuda, Hiroharu; Shimazaki, Syuji

    2002-04-01

    We compared the clinical efficacy of surgical stabilization and internal pneumatic stabilization in severe flail chest patients who required prolonged ventilatory support. Thirty-seven consecutive severe flail chest patients who required mechanical ventilation were enrolled in this study. All the patients received identical respiratory management, including end-tracheal intubation, mechanical ventilation, continuous epidural anesthesia, analgesia, bronchoscopic aspiration, postural drainage, and pulmonary hygiene. At 5 days after injury, surgical stabilization with Judet struts (S group, n = 18) or internal pneumatic stabilization (I group, n = 19) was randomly assigned. Most respiratory management was identical between the two groups except the surgical procedure. Statistical analysis using two-way analysis of variance and Tukey's test was used to compare the groups. Age, sex, Injury Severity Score, chest Abbreviated Injury Score, number of rib fractures, severity of lung contusion, and Pao2/Fio2 ratio at admission were all equivalent in the two groups. The S group showed a shorter ventilatory period (10.8 +/- 3.4 days) than the I group (18.3 +/- 7.4 days) (p < 0.05), shorter intensive care unit stay (S group, 16.5 +/- 7.4 days; I group, 26.8 +/- 13.2 days; p < 0.05), and lower incidence of pneumonia (S group, 24%; I group, 77%; p < 0.05). Percent forced vital capacity was higher in the S group at 1 month and thereafter (p < 0.05). The percentage of patients who had returned to full-time employment at 6 months was significantly higher in the S group (11 of 18) than in the I group (1 of 19). This study proved that in severe flail chest patients, surgical stabilization using Judet struts has beneficial effects with respect to less ventilatory support, lower incidence of pneumonia, shorter trauma intensive care unit stay, and reduced medical cost than internal fixation. Moreover, surgical stabilization with Judet struts improved percent forced vital capacity from the

  10. Guidelines for the practical stability studies of anticancer drugs: A european consensus conference

    NARCIS (Netherlands)

    C. Bardin (Christophe); A. Astier (A.); A.G. Vulto (Arnold); G. Sewell (G.); J. Vigneron (J.); R. Trittler (R.); M. Daouphars (M.); M.C. Paul (Muriel); M. Trojniak (M.); F. Pinguet (F.)

    2012-01-01

    textabstractStability studies performed by the pharmaceutical industry are only designed to fulfil licensing requirements. Thus post-dilution or reconstitution stability data are frequently limited to 24 h only for bacteriological reasons, regardless of the true chemical stability, which could, in

  11. SPECTRAL ANALYSIS OF GAS BEARING SYSTEMS FOR STABILITY STUDIES

    Science.gov (United States)

    latter case is given in terms of a herringbone-grooved journal bearing . This method of stability analysis is applicable to both thrust and journal bearings for both whirl and pneumatic-hammer instabilities.

  12. Studying the stabilization of vegetable pigments using 14C

    International Nuclear Information System (INIS)

    Inanejshvili, Zh.A.; Prokof'eva, M.C.

    1975-01-01

    With the help of labeled cathine tea-leaf substance it has been discovered that the later forms a specific complex with the red beet pigment. This obviously appears to be the reason for the pigment stability. An increase of the labeled cathine substance portion taken to stabilize the red pigment leads to lowering down the portion of the labeled pigment taking part in the reaction. The results from the experiment can be practically used in food industry for plant pigments

  13. Resistive Wall Mode Stabilization Studies at DIII-D

    International Nuclear Information System (INIS)

    Garofalo, A.M.

    2005-01-01

    The effort to understand the physics of the resistive wall mode (RWM) and develop methods to control this magnetohydrodynamic mode to allow achievement of higher pressure in advanced tokamak plasmas has been an example of successful multi-institutional collaboration at the DIII-D National Fusion Facility in San Diego, California. DIII-D research in this area has produced several advances and breakthroughs following a coordinated research plan involving a sequence of measurements, development of new analysis tools, and the installation of new diagnostic and feedback stabilization hardware: Suppression of the RWM by active magnetic feedback has been demonstrated using the DIII-D six-element error field correction coil, rotational stabilization of the RWM has been demonstrated and sustained for all values of the plasma pressure from the no-wall to the ideal-wall stability limits, improved RWM feedback stabilization has been shown using a new set of 12 internal control coils, and newly developed models of feedback have shown good agreement with the measurements. By so doing, the DIII-D work on RWM stabilization has become a cornerstone of the long-term advanced tokamak program and is having impact on the world fusion program. Presently both ITER and FIRE are including plans for RWM stabilization in their programs

  14. Experimental Vertical Stability Studies for ITER Performance and Design Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Humphreys, D A; Casper, T A; Eidietis, N; Ferrera, M; Gates, D A; Hutchinson, I H; Jackson, G L; Kolemen, E; Leuer, J A; Lister, J; LoDestro, L L; Meyer, W H; Pearlstein, L D; Sartori, F; Walker, M L; Welander, A S; Wolfe, S M

    2008-10-13

    Operating experimental devices have provided key inputs to the design process for ITER axisymmetric control. In particular, experiments have quantified controllability and robustness requirements in the presence of realistic noise and disturbance environments, which are difficult or impossible to characterize with modeling and simulation alone. This kind of information is particularly critical for ITER vertical control, which poses some of the highest demands on poloidal field system performance, since the consequences of loss of vertical control can be very severe. The present work describes results of multi-machine studies performed under a joint ITPA experiment on fundamental vertical control performance and controllability limits. We present experimental results from Alcator C-Mod, DIII-D, NSTX, TCV, and JET, along with analysis of these data to provide vertical control performance guidance to ITER. Useful metrics to quantify this control performance include the stability margin and maximum controllable vertical displacement. Theoretical analysis of the maximum controllable vertical displacement suggests effective approaches to improving performance in terms of this metric, with implications for ITER design modifications. Typical levels of noise in the vertical position measurement which can challenge the vertical control loop are assessed and analyzed.

  15. A stability study of plasma polymerized acrylic acid films

    Science.gov (United States)

    Cools, Pieter; Declercq, Heidi; De Geyter, Nathalie; Morent, Rino

    2018-02-01

    A medium pressure parallel-plate DBD set-up was used for the deposition of carboxylic acid-rich films using acrylic acid as precursor. A variety of discharge powers (21-33 W) and monomer flow rates (0.25-0.5 g/h) were applied to develop a range of coatings from highly unstable to completely stable in aqueous solutions. FT-IR and XPS were used to identify which coatings were stable under dynamic incubation conditions and what influence plasma operating parameters had on functional group preservation. White light interferometry was also used to calculate deposition rates (66-126 nm/min) and to determine the deposition regime (monomer deficient). Human foreskin fibroblasts were seeded onto the complete range of investigated samples and the effects of coating (in)stability on cell adhesion, viability and morphology were systematically studied. Results showed that the 27 W-0.25 g/h treatment conditions resulted in the most stable coatings. Although a concentration of only 0.7% of carboxylic acid groups was found under these experimental conditions, the positive effects of a highly acid-rich surface were still maintained as cell-material interactions were significantly enhanced.

  16. Environmental stability study of holographic solar spectrum splitting materials

    Science.gov (United States)

    Chrysler, Benjamin D.; Ayala Pelaez, Silvana; Wu, Yuechen; Vorndran, Shelby D.; Kostuk, Raymond K.

    2016-09-01

    In this study the impact of outdoor temperature variations and solar illumination exposure on spectral filter material and holographic optical elements is examined. Although holographic components have been shown to be useful for solar spectrum splitting designs, relatively little quantitative data exist to demonstrate the extent to which these materials can withstand outdoor conditions. As researchers seek to investigate practical spectrum splitting designs, the environmental stability of holographic materials should be considered as an important factor. In the experiment presented, two holographic materials, Covestro Bayfol HX photopolymer and dichromated gelatin, and 3M reflective polymer filter materials are exposed to outdoor conditions for a period of several months. The environmental effect on absorption, spectral and angular bandwidth, peak efficiency, and Bragg matching conditions for the holograms are examined. Spectral bandwidth and transmittance of the 3M reflective filter material are also monitored. Holographic gratings are recorded, measured, and mounted on glass substrates and then sealed with a glass cover plate. The test samples are then mounted on a photovoltaic panel to simulate realistic temperature conditions and placed at an outdoor test facility in Tucson, Arizona. A duplicate set of holograms and 3M filter material is stored as a control group and periodically compared over the test period.

  17. Thermo-hydraulic stability study of a steam generator

    International Nuclear Information System (INIS)

    Magni, M C; Marcel, C P; Delmastro, D F

    2012-01-01

    In this work a mathematical model developed to investigate the thermalhydraulic stability of a helically coiled steam generator is presented. Such a steam generator is prone to experiment density wave oscillations. The model is therefore used to analyze the stability of the CAREM-25 reactor steam generators. The model is linear, numerically non-diffusive and nodal. In addition, it is able to represent non-uniform heat transfer fluxes between the primary and secondary coolant circuits. By using this model the marginal stability condition is found by varying the inlet friction coefficient for different conditions. The results are then compared with those obtained with a different model for which a simple uniform heat flux profiled is assumed. It is found that with such simplification the density waves instability mechanism is overestimated in a wide range of operating powers. For very low powers, in the contrary, the so-called uniform model underestimates the stabilizing inlet friction and therefore it gives non-conservative results. With the use of the more realistic non-uniform power profile model, it was possible to determine that, for a CAREM-25 steam generator, the most stable conditions is found at 60MW when the reactor operates at nominal pressure. Moreover, it is found that at high power levels the stability performance is dominated by the two-phase friction component while at low power levels the friction component originated in the over heated steam region prevail (author)

  18. Study Addiction: A Cross-Cultural Longitudinal Study Examining Temporal Stability and Predictors of Its Changes

    OpenAIRE

    Atroszko, Pawe? Andrzej; Andreassen, Cecilie Schou; Griffiths, Mark D.; Pallesen, St?le

    2016-01-01

    Background and aims: "Study addiction" has recently been conceptualized as a behavioral addiction and defined within the framework of work addiction. Using a newly developed measure to assess this construct, the Bergen Study Addiction Scale (BStAS), the present study examined the 1-year stability of study addiction and factors related to changes in this construct over time, and is the first longitudinal investigation of study addiction thus far. \\ud Methods: The BStAS and the Ten Item Persona...

  19. A valuation study of fuel supply stability of nuclear energy

    International Nuclear Information System (INIS)

    Nagano, Koji; Nagata, Yutaka; Hitomi, Kazumi; Hamagata, Sumio; Asaoka, Yoshiyuki

    2008-01-01

    In order to assess potential benefits of nuclear power with regard to its characteristics of fuel supply stability, the following three aspects are valuated under the Japanese energy and electricity mix: a) economic stability; i.e. nuclear power's contribution to the whole energy and electricity mix in terms of resistance to fluctuation and/or fuel price hikes, b) procurement stability; i.e. natural uranium, the raw fuel material for nuclear power generation, is being imported from more reliable sources through adequately diverse markets than in the cases of oil and natural gas, and, c) passive reserve effect; i.e. fuel materials as running stocks at power stations and fuel service facilities could maintain nuclear power generation running for a certain duration under unexpected disruption of fuel supply. (author)

  20. Defining Anaerobic Digestion Stability-Full Scale Study

    Science.gov (United States)

    Demitry, M. E., Sr.

    2014-12-01

    A full-scale anaerobic digester receiving a mixture of primary and secondary sludge was monitored for one hundred days. A chemical oxygen demand, COD, and a volatile solids, VS, mass balance was conducted to evaluate the stability of the digester and its capability of producing methane gas. The COD mass balance could account for nearly 90% of the methane gas produced while the VS mass balance showed that 91% of the organic matter removed resulted in biogas formation. Other parameters monitored included: pH, alkalinity, VFA, and propionic acid. The values of these parameters showed that steady state had occurred. Finally, at mesophilic temperature and at steady state performance, the anaerobic digester stability was defined as a constant ratio of methane produced per substrate of ΔVS (average ratio=0.404 l/g). This ratio can be used as universal metric to determine the anaerobic digester stability in an easy and inexpensive way.

  1. Ultrasonic Studies of Emulsion Stability in the Presence of Magnetic Nanoparticles

    Directory of Open Access Journals (Sweden)

    A. Józefczak

    2015-01-01

    Full Text Available Pickering emulsions are made of solid particle-stabilized droplets suspended in an immiscible continuous liquid phase. A magnetic emulsion can be obtained using magnetic particles. Solid magnetic nanoparticles are adsorbed strongly at the oil-water interface and are able to stabilize emulsions of oil and water. In this work emulsions stabilized by magnetite nanoparticles were obtained using high-energy ultrasound waves and a cavitation mechanism and, next, their stability in time was tested by means of acoustic waves with a low energy, without affecting the structure. An acoustic study showed high stability in time of magnetic emulsions stabilized by magnetite particles. The study also showed a strong influence of an external magnetic field, which can lead to changes of the emulsion properties. It is possible to control Pickering emulsion stability with the help of an external stimulus—a magnetic field.

  2. Stability Study of ATF 80MeV Injector Linac

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Douglas

    2003-06-09

    A beam stability test was carried out at ATF 80 MeV injector linac. The test was performed by taking data of each monitor in pulse to pulse base. A data acquisition system which consists of a PC and a GPIB network was used for the test. In order to analyze the data, ''Correlation Plot'' method is used which is effective to find out some source of the observed beam fluctuation. This paper describes the result of the stability measurement and the comparison between ATF injector and SLC injector.

  3. Stability and Comparative Dissolution Studies of Five Brands of ...

    African Journals Online (AJOL)

    The dissolution profiles of five different brands of norfloxacin (400 mg) tablets designated as A, B, C, D, and E, marketed in Addis Ababa were compared with those of an innovator product (F). The stability of these tablets was evaluated under the influence of accelerated conditions (40 °C + 2 °C and 75% ± 5% RH).

  4. Fabrication and thermal stability studies of polyamide 66 containing ...

    Indian Academy of Sciences (India)

    During fabrication of FR-PA66, melt polymerization time exhibits more surprising influence on intrinsic viscosity than aqueous solution polymerization time. The LOI value of FR-PA66 with 9 wt% TPO reaches 27.2, and corresponding UL94 rating reaches V-0. Improved thermo-stability of FR-PA66 can be attributed to both ...

  5. Accelerated Stability Studies of Three Local Drug Products Prone to ...

    African Journals Online (AJOL)

    Three locally manufactured drug products, Aspirin 300 mg tablets, Chloramphenicol 250 mg capsules and Ampicillin Trihydrate 500 mg capsules, obtained from three production batches, were exposed to storageconditions maintained at 40 °C and 75% relative humidity (RH) in a stability chamber. The products were ...

  6. Studies of iso-alpha-acids : analysis, purification, and stability.

    NARCIS (Netherlands)

    Khatib, Alfi

    2006-01-01

    The female cones of hop (Humulus lupulus L.) are added to beer, providing taste and flavour and contributing to the stability of foam. The main constituents of hop related to these properties are generically known as alpha-acids. During the brewing process, these acids are isomerized, resulting in

  7. Stability of the human spine: a biomechanical study

    NARCIS (Netherlands)

    Scholten, P.J.M.; Veldhuizen, A.G.; Grootenboer, H.J.

    1988-01-01

    The influences of curvatures and of physical properties on the mechanical stability of the spine were analysed by means of a three-dimensional, geometrical, nonlinear biomechanical model. According to the model, the initial buckling load decreases with increasing lordotic and kyphotic curvatures.

  8. A Developed Graphical User Interface for Power System Stability and Robustness Studies

    OpenAIRE

    GHOURAF Djamel Eddine; NACERI Abdellatif; ABID Mohamed; KABI Wahiba

    2015-01-01

    This paper present the realization and development of a graphical user interface (GUI) to studied the stability and robustness of power systems (analysis and synthesis), using Conventional Power System Stabilizers (CPSS - realized on PID scheme) or advanced controllers (based on adaptive and robust control), and applied on automatic excitation control of powerful synchronous generators, to improve dynamic performances and robustness. The GUI is a useful average to facilitate stability study o...

  9. Cable Stability

    CERN Document Server

    Bottura, L

    2014-01-01

    Superconductor stability is at the core of the design of any successful cable and magnet application. This chapter reviews the initial understanding of the stability mechanism, and reviews matters of importance for stability such as the nature and magnitude of the perturbation spectrum and the cooling mechanisms. Various stability strategies are studied, providing criteria that depend on the desired design and operating conditions.

  10. Sodium tetraphenylborate solution stability: A long term study

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, M.J.

    1992-06-11

    Sodium tetraphenylborata (NaTPB) is a specialty chemical required for the In Tank Precipitation Process (ITP). It precipitates cesium, aiding in the decontamination of high level radioactive waste solutions. Long term stability of aqueous alkaline solutions of NATPB has been investigated. The focus of the investigation is on the relative stabilities of NATPB solutions exposed to varying temperatures and copper concentrations over an extended period of time. Additionally, vendor-supplied samples, incubated at 40{degree}C, were stored for more than a year without decomposing. Collected data demonstrates that in the absence of elevated copper concentrations, NATPB solutions will remain stable for periods of 1 to 2 years (at a minimum) at maximum expected operating conditions (<40{degree}C). Additionally, biuret, (H{sub 2}NCO){sub 2}NH, was tested as an additive to prevent copper-induced decomposition without success.

  11. Sodium tetraphenylborate solution stability: A long term study

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, M.J.

    1992-06-11

    Sodium tetraphenylborata (NaTPB) is a specialty chemical required for the In Tank Precipitation Process (ITP). It precipitates cesium, aiding in the decontamination of high level radioactive waste solutions. Long term stability of aqueous alkaline solutions of NATPB has been investigated. The focus of the investigation is on the relative stabilities of NATPB solutions exposed to varying temperatures and copper concentrations over an extended period of time. Additionally, vendor-supplied samples, incubated at 40[degree]C, were stored for more than a year without decomposing. Collected data demonstrates that in the absence of elevated copper concentrations, NATPB solutions will remain stable for periods of 1 to 2 years (at a minimum) at maximum expected operating conditions (<40[degree]C). Additionally, biuret, (H[sub 2]NCO)[sub 2]NH, was tested as an additive to prevent copper-induced decomposition without success.

  12. Comparative study of probabilistic methodologies for small signal stability assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rueda, J.L.; Colome, D.G. [Universidad Nacional de San Juan (IEE-UNSJ), San Juan (Argentina). Inst. de Energia Electrica], Emails: joseluisrt@iee.unsj.edu.ar, colome@iee.unsj.edu.ar

    2009-07-01

    Traditional deterministic approaches for small signal stability assessment (SSSA) are unable to properly reflect the existing uncertainties in real power systems. Hence, the probabilistic analysis of small signal stability (SSS) is attracting more attention by power system engineers. This paper discusses and compares two probabilistic methodologies for SSSA, which are based on the two point estimation method and the so-called Monte Carlo method, respectively. The comparisons are based on the results obtained for several power systems of different sizes and with different SSS performance. It is demonstrated that although with an analytical approach the amount of computation of probabilistic SSSA can be reduced, the different degrees of approximations that are adopted, lead to deceptive results. Conversely, Monte Carlo based probabilistic SSSA can be carried out with reasonable computational effort while holding satisfactory estimation precision. (author)

  13. [Study on retention and stability of linear occlusal complete dentures].

    Science.gov (United States)

    Zhang, Ping; Xu, Jun

    2003-01-01

    To learn retention and stability of linear occlusal complete dentures by investigating the subjective feelings of patient and the value of retention force. Static retention forces of maxillary and mandibular dentures were measured for 25 patients wearing linear occlusal dentures by using Hz-1 retention dynamometer. The subjective feelings of patients in functional state were gained simultaneously through questionnaire. Linear occlusal dentures demonstrate good retention in static and dynamic state. Among patients with severe resorption of residual ridge (RRR), mandibular linear occlusal dentures (shown good retentive subjective feelings) demonstrate significantly smaller retention force than those with slight or medium degree of RRR. There is no correlation between the subjective feelings and the values of retention forces of mandibular dentures. The subjective feelings of patients wearing new linear occlusal dentures are much better than that of old anatomic occlusal dentures. Linear occlusal dentures improve the performances of dentures by enhancing their stability during mastication movement.

  14. Study of TBP stability limits in pyrolysis, radiolysis and hydrolysis

    International Nuclear Information System (INIS)

    Azzouz, A.; Attou, M.

    1985-10-01

    The present investigations deal with the determination of the stability limits of different degradation phenomena during TBP process achievement, its purification, storage or in radioelements extraction. The results were obtained using a simple and quick analysis method based on TBP:HC104 complex formation. The TBP is considered stable (when its degradation rate is less than 0,5% Vol.) for temperature less than 100 0 C and time contact value of about 2 hours. It was depicted that TBP has an appreciable stability under the following conditions: NaOH 0,1 N/TBP=0,5 ml/ml and time contact <4 hours; POC13/TBP=0,02 ml/ml and time contact <1 hour; concentrated acid/TBP=0,025 ml/ml and time contact <1 h. Radiation cumulative effect seems to be the main precursor of TBP degradation. However, its stability remains appreciable under certain conditions. Practically, in all the cases, TBP decomposition is mainly tied to C-O bond breakdown

  15. Study of the stability of natural convection in partially enclosed vertical annular space

    International Nuclear Information System (INIS)

    Njamkepo, S.N.

    1983-11-01

    This paper presents the study of the bidimensional-tridimensional flow transition, solving a system of coupled equations, dynamic and thermic, with the finite element method. The study of the stability of the bidimensional flow shows: the stabilizing effect of a big space thickness-space height ratio; the destabilizing effect of the Grashof number (constant ratio) [fr

  16. [Gnathosonics study of the occlusal stability of orthodontic patients].

    Science.gov (United States)

    Jiang, Ruo-Ping; Tyson, Kenneth W

    2008-02-18

    To analysis the stability of the occlusion before and after the orthodontic treatment by gnathosonics; To evaluate the reliability of the stethoscope method by comparing the subjective(stethoscopy) and objective(digital occlusal sound recording) methods of checking the occlusal sound. Sixty-four new patients with malocclusion were selected as the before treatment group, these patients were not subject to any previous orthodontic treatment, facial surgery or injury; the treatment complete group included 15 patients who were just debonded the fixed appliance. Both stethoscope and digital occlusal sound recording were used to evaluate the occlusal sound. The occlusal stability before and after orthodontic treatment was compared depending on the results from the objective examination. The stability of the occlusion between different types of malocclusion before treatment was compared also. The veracity and reliability of the stethoscope method were analysis using the objective method as the golden standard. (1) 43.75%(28/64) of the 64 new patients showed unstable occlusal sound. ANOVA test showed that there were no statistically significant differences between the unstable rates in different type of malocclusion. (2) 40% (6/15) of the 15 treatment complete patients had unstable occlusions. (3) There were no statistically significant differences between the unstable rate pre- and post-treatment. (4) The veracity of the stethoscopes was 81.01% (64/79). (5) Kappa test showed that the stethoscopes and the digital recording method were consistent; the Kappa value was 0.488, Pocclusion rate between the two groups, and between the different types of malocclusion before treatment. (2) Using stethoscopes method to check the occlusal sound is reliable. The veracity could be improved significantly with increased experiences.

  17. Study of the stability of n-diamond

    International Nuclear Information System (INIS)

    Wen Bin; Li Tingju; Dong Chuang; Zhang Xingguo; Yao Shan; Cao Zhiqiang; Wang Dehe; Ji Shouhua; Jin Junze

    2004-01-01

    Powders of n-diamond can be synthesized by pyrogenation of carbon black and nanometre-sized iron catalyst at atmospheric pressure and at a temperature of 1100 deg. C. The stability of n-diamond was investigated with x-ray diffraction, thermal gravimetric analysis and differential thermal analysis. The results indicated that n-diamond was a metastable phase: it can decompose at room temperature slowly. Thermal decomposition of n-diamond begins at 150 deg. C and is complete at 400 deg. C, and the decomposition of n-diamond was an exothermic reaction

  18. Study of global stability of tall buildings with prestressed slabs

    Directory of Open Access Journals (Sweden)

    L. A. Feitosa

    Full Text Available The use of prestressed concrete flat slabs in buildings has been increasing in recent years in the Brazilian market. Since the implementation of tall and slender buildings a trend in civil engineering and architecture fields, arises from the use of prestressed slabs a difficulty in ensuring the overall stability of a building without beams. In order to evaluate the efficiency of the main bracing systems used in this type of building, namely pillars in formed "U" in elevator shafts and stairs, and pillars in which the lengths are significantly larger than their widths, was elaborated a computational models of fictional buildings, which were processed and analyzed using the software CAD/TQS. From the variation of parameters such as: geometry of the pillars, thick slabs, characteristic strength of the concrete, reduceofthe coefficient of inertia for consideration of non-linearities of the physical elements, stiffness of the connections between slabs and pillars, among others, to analyze the influence of these variables on the overall stability of the building from the facing of instability parameter Gama Z, under Brazilian standard NBR 6118, in addition to performing the processing of building using the P-Delta iterative calculation method for the same purpose.

  19. Stability and Change in Work Values: A Meta-Analysis of Longitudinal Studies

    Science.gov (United States)

    Jin, Jing; Rounds, James

    2012-01-01

    A meta-analysis of longitudinal studies was conducted to investigate stability and change in work values across the life span. Both rank-order stability and mean-level change were investigated using an integrative classification for intrinsic, extrinsic, social and status work values (Ross, Schwartz, & Surkis, 1999). Results of rank-order…

  20. Theoretical studies on the stability of the salts formed by DTDO with ...

    Indian Academy of Sciences (India)

    Toggle navigation. Logo of the Indian Academy of Sciences. Indian Academy of Sciences. Home · About ... Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 4. Theoretical studies on the stability of the salts formed by ... Keywords. Salts; conformations; stability; density functional theory, energetic materials.

  1. A method for studying stability domains in physical models

    Science.gov (United States)

    Gallas, Jason A. C.

    1994-10-01

    We present a method for investigating the simultaneous movement of all zeros of equations of motions defined by discrete mappings. The method is used to show that knowledge of the interplay of all zeros is of fundamental importance for establishing periodicities and relative stability properties of the various possible physical solutions. The method is also used (i) to show that the Frontière set of Fatou is defined primarily by zeros of functions leading to an entire invariant limiting function which underlies every dynamical system, (ii) to identify cyclotomic polynomials as components of the limiting function obtained for a parameter value supporting a particular superstable orbit of the quadratic map, (iii) to describe highly symmetric periodic cycles embedded in these components, and (iv) to provide an unified picture about which mathematical objects form basin boundaries of dynamical systems in general: the closure of all zeros not belonging to “stable” orbits.

  2. SAXS Study of Sterically Stabilized Lipid Nanocarriers Functionalized by DNA

    Science.gov (United States)

    Angelov, Borislav; Angelova, Angelina; Filippov, Sergey; Karlsson, Göran; Terrill, Nick; Lesieur, Sylviane; Štěpánek, Petr

    2012-03-01

    The structure of novel spontaneously self-assembled plasmid DNA/lipid complexes is investigated by means of synchrotron radiation small-angle X-ray scattering (SAXS) and Cryo-TEM imaging. Liquid crystalline (LC) hydrated lipid systems are prepared using the non-ionic lipids monoolein and DOPE-PEG2000 and the cationic amphiphile CTAB. The employed plasmid DNA (pDNA) is encoding for the human protein brain-derived neurotrophic factor (BDNF). A coexistence of nanoparticulate objects with different LC inner organizations is established. A transition from bicontinuous membrane sponges, cubosome intermediates and unilamelar liposomes to multilamellar vesicles, functionalized by pDNA, is favoured upon binding and compaction of pBDNF onto the cationic PEGylated lipid nanocarriers. The obtained sterically stabilized multicompartment nanoobjects, with confined supercoiled plasmid DNA (pBDNF), are important in the context of multicompartment lipid nanocarriers of interest for gene therapy of neurodegenerative diseases.

  3. SAXS Study of Sterically Stabilized Lipid Nanocarriers Functionalized by DNA

    International Nuclear Information System (INIS)

    Angelov, Borislav; Filippov, Sergey; Štepánek, Petr; Angelova, Angelina; Lesieur, Sylviane; Karlsson, Göran; Terrill, Nick

    2012-01-01

    The structure of novel spontaneously self-assembled plasmid DNA/lipid complexes is investigated by means of synchrotron radiation small-angle X-ray scattering (SAXS) and Cryo-TEM imaging. Liquid crystalline (LC) hydrated lipid systems are prepared using the non-ionic lipids monoolein and DOPE-PEG 2000 and the cationic amphiphile CTAB. The employed plasmid DNA (pDNA) is encoding for the human protein brain-derived neurotrophic factor (BDNF). A coexistence of nanoparticulate objects with different LC inner organizations is established. A transition from bicontinuous membrane sponges, cubosome intermediates and unilamelar liposomes to multilamellar vesicles, functionalized by pDNA, is favoured upon binding and compaction of pBDNF onto the cationic PEGylated lipid nanocarriers. The obtained sterically stabilized multicompartment nanoobjects, with confined supercoiled plasmid DNA (pBDNF), are important in the context of multicompartment lipid nanocarriers of interest for gene therapy of neurodegenerative diseases.

  4. A pilot study of core stability and athletic performance: is there a relationship?

    Science.gov (United States)

    Sharrock, Chris; Cropper, Jarrod; Mostad, Joel; Johnson, Matt; Malone, Terry

    2011-06-01

    Correlation study To objectively evaluate the relationship between core stability and athletic performance measures in male and female collegiate athletes. The relationship between core stability and athletic performance has yet to be quantified in the available literature. The current literature does not demonstrate whether or not core strength relates to functional performance. Questions remain regarding the most important components of core stability, the role of sport specificity, and the measurement of core stability in relation to athletic performance. A sample of 35 volunteer student athletes from Asbury College (NAIA Division II) provided informed consent. Participants performed a series of five tests: double leg lowering (core stability test), the forty yard dash, the T-test, vertical jump, and a medicine ball throw. Participants performed three trials of each test in a randomized order. Correlations between the core stability test and each of the other four performance tests were determined using a General Linear Model. Medicine ball throw negatively correlated to the core stability test (r -0.389, p=0.023). Participants that performed better on the core stability test had a stronger negative correlation to the medicine ball throw (r =-0.527). Gender was the most strongly correlated variable to core strength, males with a mean measurement of double leg lowering of 47.43 degrees compared to females having a mean of 54.75 degrees. There appears to be a link between a core stability test and athletic performance tests; however, more research is needed to provide a definitive answer on the nature of this relationship. Ideally, specific performance tests will be able to better define and to examine relationships to core stability. Future studies should also seek to determine if there are specific sub-categories of core stability which are most important to allow for optimal training and performance for individual sports.

  5. IN VIVO STUDIES AND STABILITY STUDY OF CLADOPHORA GLOMERATA EXTRACT AS A COSMETIC ACTIVE INGREDIENT.

    Science.gov (United States)

    Fabrowska, Joanna; Kapuscinska, Alicja; Leska, Boguslawa; Feliksik-Skrobich, Katarzyna; Nowak, Izabela

    2017-03-01

    Marine algae are widely used as cosmetics raw materials. Likewise, freshwater alga Cladophora glomerata may be a good source of fatty acids and others bioactive agents. The aims of this study was to find out if the addition of the extract from the freshwater C. glonerata affects the stability of prepared cosmetic emulsions and to investigate in vivo effects of the extract in cosmetic formulations on hydration and elasticity of human skin. Extract from the freshwater C. glonierata was obtained using supercritical fluid extraction (SFE). Two forms of O/W emulsions were prepared: placebo and emulsion containing 0.5% of Cladophora SFE extract. The stability of obtained emulsions was investigated by using Turbiscan Lab Expert. Emulsions were applied by .volunteers daily. Corneometer was used to evaluate skin hydration and cutometer to examine skin elasticity. Measurements were conducted at reference point (week 0) and after 1st, 2nd, 3rd and 4th week of application. The addition of Cladophora extract insignificantly affected stability of the emulsion. The extract from C. glomerata in the emulsion influenced the improvement of both skin hydration and its elasticity. Thus, freshwater C. glonierata extract prepared via SFE method may be considered as an effective cosmetic raw material used as a moisturizing and firming agent.

  6. Implant Stability Changes during Early Phase of Healing:A Prospective Cohort Study

    Directory of Open Access Journals (Sweden)

    A. Mesgarzadeh

    2009-06-01

    Full Text Available Objective: To assess the stability changes as a reflection of early healing around roughened-surface implants in human by resonance frequency analysis (RFA.Materials and Methods: One hundred and fifty one ITI SLA implants were placed in either maxilla or mandible of 68 patients. Bone type was classified into 4 groups according to Lekholm and Zarb index. RFA was used for direct implant stability measurement on theday of implant placement, and at 14, 30 and 60 days after placement. Student t-test and ANOVA served for statistical analysis.Results: No early failure occurred. The highest and lowest primary stability was measured in type 1 and type 4 bone, respectively. Implant stability increased over time in types 3 and 4 bone but continuously decreased in type 1 bone during the first 60 days of healing.In type 2 a small decrease in stability was observed until 30 days, and after that the stability increased. The difference between implant stability in type 2 and type 4 bone at eachtime point was highly significant (P0.05. The effect of implant length and diameter on stability at different times was tested with mixed model ANOVA, and no significant difference among groups was observed (P>0.05Conclusion: The present study demonstrated that the pattern of stability changes was different among various bone types. With regard to primary stability and pattern of stability changes in types 2 and 3 bone, immediate and early loading protocols can be recommended in these two bone types, respectively.

  7. Thermal stability studies of diamond-like carbon films

    Energy Technology Data Exchange (ETDEWEB)

    Parmeter, J.E.; Tallant, D.R.; Siegal, M.P.

    1994-04-01

    Thin films of amorphous carbon/hydrogen, also known as diamond-like carbon or DLC, are of interest as an economical alternative to diamond in a variety of coatings applications. We have investigated the thermal stability of DLC films deposited onto tungsten and aluminum substrates via plasma CVD of methane. These films contain approximately 40 atom % hydrogen, and based on Auger spectra the carbon in the films is estimated to be 60% sp{sup 3} hybridized and 40% sp{sup 2} hybridized. Thermal desorption, Auger, and Raman measurements all indicate that the DLC films are stable to 250--300C. Between 300 and 500C, thermal evolution of hydrogen from the films is accompanied by the conversion of carbon from sp{sup 3} to sp{sup 2} hybridization, and Raman spectra indicate the conversion of the overall film structure from DLC to micro-crystalline graphite or so called ``glassy`` carbon. These results suggest that DLC of this type is potentially useful for applications in which the temperature does not exceed 250C.

  8. Synthesis and Stability of Iron Nanoparticles for Lunar Environment Studies

    Science.gov (United States)

    Hung, Ching-cheh; McNatt, Jeremiah

    2009-01-01

    Simulant of lunar dust is needed when researching the lunar environment. However, unlike the true lunar dust, today s simulants do not contain nanophase iron. Two different processes have been developed to fabricate nanophase iron to be used as part of the lunar dust simulant: (1) Sequentially treating a mixture of ferric chloride, fluorinated carbon, and soda lime glass beads at about 300 C in nitrogen, at room temperature in air, and then at 1050 C in nitrogen. The product includes glass beads that are grey in color, can be attracted by a magnet, and contain alpha-iron nanoparticles (which seem to slowly lose their lattice structure in ambient air during a period of 12 months). This product may have some similarity to the lunar glassy regolith that contains Fe(sup 0). (2) Heating a mixture of carbon black and a lunar simulant (a mixed metal oxide that includes iron oxide) at 1050 C in nitrogen. This process simulates lunar dust reaction to the carbon in a micrometeorite at the time of impact. The product contains a chemically modified simulant that can be attracted by a magnet and has a surface layer whose iron concentration increased during the reaction. The iron was found to be alpha-iron and Fe3O4 nanoparticles, which appear to grow after the fabrication process, but stabilizes after 6 months of ambient air storage.

  9. [Study on relationship between emotional stability in flight and nerve system excitability].

    Science.gov (United States)

    Liu, Fang; Huang, Wei-fen; Jing, Xiao-lu; Zhang, Ping

    2003-06-01

    To study the related factors of emotional stability in flight. Based on the operable definition of emotional stability in flight and the related literature review, 63 experienced pilots and flight coaches were investigated and the other-rating questionnaire of emotional stability in flight was established. To test the senior nerve system, Uchida Kraeplin (UK) test was administrated on 153 19-21 years old male student pilots of the second grade in the department of flight technique in China Civil Aviation College, who were selected through 13 h flight, 35 h solo flight, and acted as the standardization group. In the end, the correlation was explored between the testing results and their emotional behavioral characteristics in flight. Significant positive correlation was found between emotional feature indexes of emotional stability in flight and excitability in UK test. The excitability in UK test are good predictors for emotional stability in flight.

  10. Stabilization of liquid low-level and mixed wastes: a treatability study

    International Nuclear Information System (INIS)

    Carson, S.; Cheng, Yu-Cheng; Yellowhorse, L.; Peterson, P.

    1996-01-01

    A treatability study has been conducted on liquid low-level and mixed wastes using the stabilization agents Aquaset, Aquaset II, Aquaset II-H, Petroset, Petroset-H, and Petroset and Petroset II. A total of 40 different waste types with activities ranging from 10 -14 to 10 -4 curies/ml have been stabilized. Reported data for each waste include its chemical and radiological composition and the optimum composition or range of compositions (weight of agent/volume of waste) for each stabilization agent used. All wastes were successfully stabilized with one or more of the stabilization agents and all final waste forms passed the Paint Filter Liquids Test (EPA Method 9095)

  11. Stabilization of liquid low-level and mixed wastes: a treatability study

    Energy Technology Data Exchange (ETDEWEB)

    Carson, S.; Cheng, Yu-Cheng; Yellowhorse, L.; Peterson, P.

    1996-02-01

    A treatability study has been conducted on liquid low-level and mixed wastes using the stabilization agents Aquaset, Aquaset II, Aquaset II-H, Petroset, Petroset-H, and Petroset and Petroset II. A total of 40 different waste types with activities ranging from 10{sup {minus}14} to 10{sup {minus}4} curies/ml have been stabilized. Reported data for each waste include its chemical and radiological composition and the optimum composition or range of compositions (weight of agent/volume of waste) for each stabilization agent used. All wastes were successfully stabilized with one or more of the stabilization agents and all final waste forms passed the Paint Filter Liquids Test (EPA Method 9095).

  12. Real time and accelerated stability studies of Tetanus toxoid manufactured in public sector facilities of Pakistan.

    Science.gov (United States)

    Parveen, Ghazala; Hussain, Shahzad; Malik, Farnaz; Begum, Anwar; Mahmood, Sidra; Raza, Naeem

    2013-11-01

    Tetanus is an acute illness represented by comprehensive increased inflexibility and spastic spasms of skeletal muscles. The poor quality tetanus toxoid vaccine can raise the prevalence of neonatal tetanus. WHO has taken numerous steps to assist national regulatory authorities and vaccine manufacturers to ensure its quality and efficacy. It has formulated international principles for stability evaluation of each vaccine, which are available in the form of recommendations and guidelines. The aim of present study was to ensure the stability of tetanus vaccines produced by National Institute of Health, Islamabad, Pakistan by employing standardized methods to ensure constancy of tetanus toxoid at elevated temperature, if during storage/transportation cold chain may not be maintained in hot weather. A total of three batches filled during full-scale production were tested. All Stability studies determination were performed on final products stored at 2-8°C and elevated temperatures in conformance with the ICH Guideline of Stability Testing of Biological Products. These studies gave comparison between real time shelf-life stability and accelerated stability studies. The findings indicate long﷓term thermo stability and prove that this tetanus vaccine can remain efficient under setting of routine use when suggested measures for storage and handling are followed in true spirit.

  13. A study of helicopter stability and control including blade dynamics

    Science.gov (United States)

    Zhao, Xin; Curtiss, H. C., Jr.

    1988-01-01

    A linearized model of rotorcraft dynamics has been developed through the use of symbolic automatic equation generating techniques. The dynamic model has been formulated in a unique way such that it can be used to analyze a variety of rotor/body coupling problems including a rotor mounted on a flexible shaft with a number of modes as well as free-flight stability and control characteristics. Direct comparison of the time response to longitudinal, lateral and directional control inputs at various trim conditions shows that the linear model yields good to very good correlation with flight test. In particular it is shown that a dynamic inflow model is essential to obtain good time response correlation, especially for the hover trim condition. It also is shown that the main rotor wake interaction with the tail rotor and fixed tail surfaces is a significant contributor to the response at translational flight trim conditions. A relatively simple model for the downwash and sidewash at the tail surfaces based on flat vortex wake theory is shown to produce good agreement. Then, the influence of rotor flap and lag dynamics on automatic control systems feedback gain limitations is investigated with the model. It is shown that the blade dynamics, especially lagging dynamics, can severly limit the useable values of the feedback gain for simple feedback control and that multivariable optimal control theory is a powerful tool to design high gain augmentation control system. The frequency-shaped optimal control design can offer much better flight dynamic characteristics and a stable margin for the feedback system without need to model the lagging dynamics.

  14. Study of structures and stability in nitrogen plasma jet

    International Nuclear Information System (INIS)

    Tiwari, Nirupama; Meher, K.C.; Ghorui, Srikumar

    2015-01-01

    Stability of a dc non-transferred arc plasma jet and its internal structures are important for any application related to material processing like plasma spraying, nano synthesis etc. Plasma jet fluctuation and structure formation inside arc plasma jets occur due to reasons like arc root rotation, power supply fluctuation, air entrainment and interaction between electromagnetic and fluid dynamic body forces. Isolated temperature islands originated through such interactions affects particle trajectory, physical processes and process chemistry in a significant manner. In this paper, plasma jet images are recorded at frame rate 7000 FPS for argon and nitrogen plasma. Images are synchronized with voltage signal using camera trigger signal as a trigger to the digital storage oscilloscope. In the experiment, gas flow rate is varied from 10 lpm to 30 lpm in step of 5 lpm keeping torch power constant. All parameter of the camera (exposure time, aperture, focal length) are kept fixed throughout. It has been observed that the luminous length of the plasma jet decreases with increase in gas flow rate for nitrogen, while the reverse happens for argon. It is also observed that while the plasma jet remains fairly steady for low flow rate, variety of different interesting structures are observed inside the plasma jet at higher flow rates. The intensity variation and intensity contours inside the plasma jet are probed using image analysis software. It has been observed that these structures are relatively independent of the arc voltage but highly dependent on gas flow rate and torch power. Reasons for observed behavior are investigated. As thermal and chemical processes are highly dependent on temperature, observed isolated temperature zones inside the plasma jet are of great importance from application point of view. Plasma blob movement observed inside the jet is used for a rough estimate of the plasma jet velocity. (author)

  15. Studies of solid liner stability in electromagnetic implosions

    International Nuclear Information System (INIS)

    Atchison, W.L.; Faehl, R.J.; Rienovsky, R.E.; Morgan, D.

    1998-01-01

    simulations and analysis will be presented of both sets of experiments and interpretations of the effect of conductivity on liner stability will be given

  16. Stability and change in alcohol habits of different socio-demographic subgroups--a cohort study.

    Science.gov (United States)

    Sydén, Lovisa; Wennberg, Peter; Forsell, Yvonne; Romelsjö, Anders

    2014-05-29

    Stability in alcohol habits varies over time and in subgroups, but there are few longitudinal studies assessing stability in alcohol habits by socio-demographic subgroups and potential predictors of stability and change. The aim was to study stability and change in alcohol habits by sex, age, and socio-economic position (SEP). Data derived from two longitudinal population based studies in Sweden; the PART study comprising 19 457 individuals aged 20-64 years in 1998-2000, and the Stockholm Public Health Cohort (SPHC) with 50 067 individuals aged 18-84 years in 2002. Both cohorts were followed-up twice; PART 2000-2003 and 2010, and SPHC 2007 and 2010. Alcohol habits were measured with the Alcohol Use Disorders Identification Test (AUDIT), and with normal weekly alcohol consumption (NWAC). Stability in alcohol habits was measured with intraclass correlation. Odds ratios were estimated in multinomial logistic regression analysis to predict stability in alcohol habits. For the two drinking measures there were no consistent patterns of stability in alcohol habits by sex or educational level. The stability was higher for older age groups and self-employed women. To be a man aged 30-39 at baseline predicted both increase and decrease in alcohol habits. The findings illustrate higher stability in alcohol habits with increasing age and among self-employed women with risky alcohol habits. To be a man and the age 30-39 predicted change in alcohol habits. No conclusive pattern of socio-economic position as predictor of change in alcohol habits was found and other studies of potential predictors seem warranted.

  17. Gaze stabilization reflexes in the mouse: New tools to study vision and sensorimotor

    NARCIS (Netherlands)

    B. van Alphen (Bart)

    2010-01-01

    markdownabstract__abstract__ Gaze stabilization reflexes are a popular model system in neuroscience for connecting neurophysiology and behavior as well as studying the neural correlates of behavioral plasticity. These compensatory eye movements are one of the simplest motor behaviors,

  18. The stability study of myristyl dimethyl amine oxide as an amphoteric ...

    African Journals Online (AJOL)

    The stability study of myristyl dimethyl amine oxide as an amphoteric surfactant in strong oxidant media containing 5 % m/m sodium hypochlorite through measurement of decomposing rate using high performance liquid chromatography and two phase titration.

  19. Study on mechanism for amorphous drug stabilization using gelucire 50/13.

    Science.gov (United States)

    Shimpi, Shamkant Laxman; Mahadik, Kakasaheb Ramoo; Paradkar, Anant Raghunath

    2009-09-01

    Methods of preparation and application of amorphous form are well established but it is equally important to note that devitrification of amorphous drugs has limited their applications. Present study was performed to investigate mechanism for amorphous drug stabilization using Gelucire in comparison with polyvinylpyrrolidone (PVP). Etoricoxib and celecoxib were taken as model drugs for this study, as etoricoxib has only proton accepting site for hydrogen bonding in comparison with celecoxib, which has both proton accepting and donating site. Solid dispersion of celecoxib with polyvinylpyrrolidone and Gelucire was prepared by spray drying and melt-granulation technique respectively. X-ray powder diffractometry and differential scanning calorimetry were used to study the physical state of the drug. Dissolution studies were performed to differentiate dissolution performance. Stability study samples were evaluated for physical state of the drug and dissolution performance. An IR study in correlation with molecular modeling was carried out to study the mechanism for stabilization. Dissolution of melt-granulation of amorphous celecoxib was improved significantly as compared to amorphous celecoxib and Celecoxib-PVP solid dispersion. Melt-granulation with lipid seemed to be more dominant than amorphization of drug for improving dissolution. Stability data revealed that PVP was significantly advantageous for amorphous form stabilization whereas Gelucire failed in case of Celecoxib. In contrast to this, our previous study revealed the stabilization ability of Gelucire for amorphous etoricoxib. Molecular modeling and IR studies revealed that H-bonding was predominant mechanism for stabilization. Out of two proposed mechanism for amorphous drug stabilization by lipids, H-bonding ability is more dominant than immobilization of molecule in lipid matrix.

  20. Study of stability of a bandpass sigma delta modulator with sinusoidal input

    Energy Technology Data Exchange (ETDEWEB)

    Iu, Herbert H.C. [School of Electrical, Electronic and Computer Engineering, University of Western Australia, 35 Stirling Highway, Crawley (Australia)]. E-mail: herbert@ee.uwa.edu.au

    2007-07-15

    Bandpass sigma delta modulators (SDMs) have applications in areas such as digital radio demodulation. Stability issues of bandpass SDMs have been widely studied. Usually, zero or step inputs are considered. In this paper, we study the stability and non-linear phenomena of a bandpass SDM with sinusoidal input. In particular, the effects of the amplitude and frequency of the sinusoidal input signal will be investigated.

  1. Quality control and stability study of 100 mg/ml paracetamol oral drops

    International Nuclear Information System (INIS)

    Garcia Penna, Caridad M.; Montes de Oca Porto, Yanet; Salomon Izquierdo, Suslebys

    2013-01-01

    Paracetamol is an effective analgesic and antipyretic drug of the non-steroidal anti-inflammatory drug group. Paracetamol oral drops are indicated for use in infant population aged up to 5 years to relieve fever, headache, toothache and symptomatic relief of common cold. To validate two analytical methods for the quality control and the stability study and to study the stability of 100 mg/ml Paracetamol oral drops made in Cuba

  2. Cervical stability training with and without core stability training for patients with cervical disc herniation: A randomized, single-blind study.

    Science.gov (United States)

    Buyukturan, B; Guclu-Gunduz, A; Buyukturan, O; Dadali, Y; Bilgin, S; Kurt, E E

    2017-11-01

    This study aims at evaluating and comparing the effects of cervical stability training to combined cervical and core stability training in patients with neck pain and cervical disc herniation. Fifty patients with neck pain and cervical disc herniation were included in the study, randomly divided into two groups as cervical stability and cervical-core stability. Training was applied three times a week in three phases, and lasted for a total duration of 8 weeks. Pain, activation and static endurance of deep cervical flexor muscles, static endurance of neck muscles, cross-sectional diameter of M. Longus Colli, static endurance of trunk muscles, disability and kinesiophobia were assessed. Pain, activation and static endurance of deep cervical flexors, static endurance of neck muscles, cross-sectional diameter of M. Longus Colli, static endurance of trunk muscles, disability and kinesiophobia improved in both groups following the training sessions (p < 0.05). Comparison of the effectiveness of these two training methods revealed that the cervical stability group produced a greater increase in the right transverse diameter of M. Longus Colli (p < 0.05). However, static endurance of trunk muscles and kinesiophobia displayed better improvement in the cervical-core stability group (p < 0.05). Cervical stability training provided benefit to patients with cervical disc herniation. The addition of core stability training did not provide any additional significant benefit. Further research is required to investigate the efficacy of combining other techniques with cervical stability training in patients with cervical disc herniation. Both cervical stability training and its combination with core stability training were significantly and similarly effective on neck pain and neck muscle endurance in patients with cervical disc herniation. © 2017 European Pain Federation - EFIC®.

  3. I-V Performance and stability study of dyes for luminescent plate concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Slooff, L.H.; Kinderman, R.; Burgers, A.R.; Van Roosmalen, J.A.M. [ECN Solar Energy, Petten (Netherlands); Buechtemann, A.; Danz, R. [Fraunhofer Institute for Applied Polymer Research, Geiselbergstr. 69, D-14476 Golm (Germany)

    2007-08-15

    In this paper, both the performance and stability of luminescent flat plate concentrator (LFPC) plates in combination with mc-Si photovoltaic cells are studied. It is shown that the electrical current of a silicon solar cell attached to the luminescent plate is improved by a factor 1.5 using a LFPC containing a single dye. It is also shown that most of the dyes are not stable in the polymer plates that are currently used. Screening of the stability of several other dyes indicates that the stability is strongly dependent on the type of dye and the polymer matrix, e.g., additives or the monomer residues.

  4. Analytical and numerical studies of sawtooth stabilization with on-axis ICRH on Tore Supra

    International Nuclear Information System (INIS)

    Zabiego, M.; Basiuk, V.; Becoulet, A.; Garbet, X.; Saoutic, B.; White, R.B.; Wu, Y.

    1995-01-01

    Sawtooth stabilization has recently been achieved with on-axis ICRH on Tore Supra. Analytic and numerical tools have been developed that allow analysis of these data, with the emphasis on the energetic-particle contribution. The latter is calculated on the basis of an original expression for the hot-ion distribution function, mostly-passing, deduced from theoretical and experimental ICRH studies, and compared to the usual mostly-trapped model. Both models account for stabilization, but for different reasons: with the mostly-passing distribution, stabilization is essentially driven by barely-passing hot ions. (author) 9 refs.; 2 figs

  5. Color Stability of Teeth Restored with Biodentine: A 6-month In Vitro Study.

    Science.gov (United States)

    Vallés, Marta; Roig, Miguel; Duran-Sindreu, Fernando; Martínez, Syani; Mercadé, Montserrat

    2015-07-01

    White mineral trioxide aggregate (WMTA) has been reported to cause dental discoloration. A previous study on the color stability of 5 calcium silicate-based materials investigated the color stability of Biodentine (Septodont, Saint-Maur-des-Fossés, France) in different experimental environments; however, no data are available on the color stability of teeth restored with Biodentine. In this study, we assessed the color stability under artificial light of ex vivo human teeth restored coronally with WMTA or Biodentine. Cavities were prepared on coronal tooth specimens and restored with WMTA + composite (n = 16), Biodentine + composite (n = 16), or composite alone (control, n = 3). Color was assessed spectrophotometrically at 6 time points (initial, 1 week, 2 weeks, 1 month, 3 months, and 6 months), and color difference values were calculated. Statistical analysis was performed using analysis of variance and the Fisher least significant difference test for which P Biodentine and control groups showed color stability and were not significantly different from one another. Teeth treated with WMTA exhibited discoloration, whereas those treated with Biodentine maintained color stability throughout the study. However, further in vivo studies are necessary to corroborate these results. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  6. Empirical Study of the Stability of Biodiesel and Biodiesel Blends: Milestone Report

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R. L.; Westbrook, S. R.

    2007-05-01

    The objective of this work was to develop a database that supports specific proposals for a stability test and specification for biodiesel and biodiesel blends. B100 samples from 19 biodiesel producers were obtained in December of 2005 and January of 2006 and tested for stability. Eight of these samples were then selected for additional study, including long-term storage tests and blending at 5% and 20% with a number of ultra-low sulfur diesel fuels.

  7. Regulation of stability studies to enhance the efficiency of drug registrations to regulatory authorities

    Directory of Open Access Journals (Sweden)

    Mohammad Sajjad Khan

    2015-01-01

    Full Text Available Stability testing is an important tool to assess the quality of drug substances and products which may vary with time under influence of variety of factors such as temperature, humidity, and light. Stability studies of drugs are designed according to the climatic zones to establish a retest period for active drug substance or a shelf life for the finished product as well as to recommend the storage conditions. The strict regulatory requirements on designing, performing evaluating stability study to claim the expiry date, and shelf life of drug products are based on a series of regulatory requirements and advisory guidelines that have been developed by regulatory authorities of US, Europe, and Japan which; were harmonized through the development of the International Conference on Harmonization (ICH procedures. To assess the stability of drug substances and products, the design and conduct of stability studies, defining relevant thresholds for impurities testing is required with a current good manufacturing practice-based risk management approach to achieve a robust stability of pharmaceutical dosage forms. There are relevant requirements that cover new drug substances and products as well as new dosage forms containing existing active ingredients and vice versa.

  8. Study of nuclear power plant stability. Trip criteria

    International Nuclear Information System (INIS)

    Beato Castro, D.; Iturbe Uriarte, R.; Wilhelmi Ayza, J.R.

    1993-01-01

    The influence that nuclear power plants and high voltage power systems have on each other when confronted by disturbances in the offsite network may lead, due to dynamic effects, to plant trip. It is therefore necessary to study the disturbances in the network and the effects on plant equipment by means of dynamic simulations which evaluate the unit protection system and the auxiliary services so as to obtain maximum unit availability without jeopardizing its safety. These studies can be conducted since there are models and software tools capable of simulating dynamic behaviour of the electric system, including the excitation systems and specific speed governors obtainment of valid. (author)

  9. Theoretical study of fractal growth and stability on surface

    DEFF Research Database (Denmark)

    Dick, Veronika V.; Solov'yov, Ilia; Solov'yov, Andrey V.

    2009-01-01

    We perform a theoretical study of the fractal growing process on surface by using the deposition, diffusion, aggregation method. We present a detailed analysis of the post-growth processes occurring in a nanofractal on surface. For this study we developed a method which describes the internal...... dynamics of particles in a fractal and accounts for their diffusion and detachment. We demonstrate that these kinetic processes are responsible for the formation of the final shape of the islands on surface after the post-growth relaxation....

  10. Study on the development and stability of perovskite solar cells

    Science.gov (United States)

    Xing, Shucheng

    2017-08-01

    Recently, the development of perovskite solar cells has aroused the concern of the majority of scholars, the current photoelectric conversion efficiency has reached 21%. So the thorough study of the principle of perovskite type solar cells will make better the use of its special performance. But so far, perovskite type solar cells still have many unstable factors. This paper first discusses the predecessor of perovskite solar cells, dye-sensitized batteries, and then study the working principle of the former, followed by the perovskite-type thermal instability and light instability to be discussed, at last talks about the current Major issues perovskite materials are facing and make a summary.

  11. Studies on genetics, stability and possible mechanism of ...

    Indian Academy of Sciences (India)

    Navya

    All of these examples support our study that selection of P. solenopsis with deltamethrin has a great impact on development of insecticide resistance. Development of very high resistance in P. solenopsis might be due to excessive use of deltamethrin by farmers in the field for the control of this pest in cotton growing areas of ...

  12. Stability studies and degradation kinetics of some commercially ...

    African Journals Online (AJOL)

    The present study was undertaken to investigate the effect of temperature on the degradation of metronidazole suspensions commercially available in Nigeria. Six different brands of metronidazole suspension, coded as MTZ A to MTZ F, were evaluated for their active contents using microbiological assay method. They were ...

  13. Studies on genetics, stability and possible mechanism of ...

    Indian Academy of Sciences (India)

    ace of a new mealy bug, Phenacoccus gossypiphilous to the eco- nomic crops of Southern Asia, p. 30. Abstr. XI Int. Symp. on. Scale Insect Studies (ISSIS), 24–27, Oeiras, Portugal. Abbas N., Khan H. A. A. and Shad S. A. 2014 Cross-resistance, genetics, and realized heritability of resistance to fipronil in the house fly, Musca ...

  14. Study of Stability of Rotational Motion of Spacecraft with Canonical Variables

    Directory of Open Access Journals (Sweden)

    William Reis Silva

    2012-01-01

    Full Text Available This work aims to analyze the stability of the rotational motion of artificial satellites in circular orbit with the influence of gravity gradient torque, using the Andoyer variables. The used method in this paper to analyze stability is the Kovalev-Savchenko theorem. This method requires the reduction of the Hamiltonian in its normal form up to fourth order by means of canonical transformations around equilibrium points. The coefficients of the normal Hamiltonian are indispensable in the study of nonlinear stability of its equilibrium points according to the three established conditions in the theorem. Some physical and orbital data of real satellites were used in the numerical simulations. In comparison with previous work, the results show a greater number of equilibrium points and an optimization in the algorithm to determine the normal form and stability analysis. The results of this paper can directly contribute in maintaining the attitude of artificial satellites.

  15. Status of a study of stabilization and fine positioning of CLIC quadrupoles to the nanometre level

    CERN Document Server

    Artoos, K; Esposito, M; Fernandez Carmona, P; Guinchard, M; Hauviller, C; Janssens, S; Kuzmin, A; Leuxe, R; Moron Ballester, R

    2011-01-01

    Mechanical stability to the nanometre and below is required for the Compact Linear Collider (CLIC) quadrupoles to frequencies as low as 1 Hz. An active stabilization and positioning system based on very stiff piezo electric actuators and inertial reference masses is under study for the Main Beam Quadrupoles (MBQ). The stiff support was selected for robustness against direct forces and for the option of incrementally repositioning the magnet with nanometre resolution. The technical feasibility was demonstrated by a representative test mass being stabilized and repositioned to the required level in the vertical and lateral direction. Technical issues were identified and the development programme of the support, sensors, and controller was continued to increase the performance, integrate the system in the overall controller, adapt to the accelerator environment, and reduce costs. The improvements are implemented in models, test benches, and design of the first stabilized prototype CLIC magnet. The characterizati...

  16. Synthesis and formulation studies of griseofulvin analogues with improved solubility and metabolic stability

    DEFF Research Database (Denmark)

    Petersen, Asger Bjørn; Andersen, Nikolaj Sten; Konotop, Gleb

    2017-01-01

    potency in vitro. Analogue 2 was also shown to retard tumor growth through inhibition of centrosomal clustering in murine xenograft models of colon cancer and multiple myeloma. However, similar to griseofulvin, compound 2 exhibited poor metabolic stability and aqueous solubility. In order to improve...... the poor pharmacokinetic properties, 11 griseofulvin analogues were synthesized and evaluated for biological activity and physiological stabilities including SGF, plasma, and metabolic stability. Finally, the most promising compounds were investigated in respect to thermodynamic solubility and formulation...... studies. The 2'-benzylamine analogue 10 proved to be the most promising compound with low μM in vitro anticancer potency, a 200-fold increase in PBS solubility over compound 2, and with improved metabolic stability. Furthermore, this analogue proved compatible with formulations suitable for both oral...

  17. The stabilizing effect of streaks on Tollmien-Schlichting and oblique waves: A parametric study

    Science.gov (United States)

    Bagheri, Shervin; Hanifi, Ardeshir

    2007-07-01

    The stabilizing effect of finite amplitude streaks on the linear growth of unstable perturbations [Tollmien-Schlichting (TS) and oblique waves] is numerically investigated by means of the nonlinear parabolized stability equations. We have found that for stabilization of a TS-wave, there exists an "optimal" spanwise spacing of the streaks. These streaks reach their maximum amplitudes close to the first neutral point of the TS-wave and induce the largest distortion of the mean flow in the unstable region of the TS-wave. For such a distribution, the required streak amplitude for complete stabilization of a given TS-wave is considerably lower than for β =0.45, which is the optimal for streak growth and used in previous studies. We have also observed a damping effect of streaks on the growth rate of oblique waves in Blasius boundary layer and for TS-waves in Falkner-Skan boundary layers.

  18. Fundamental Studies of Fluid Mechanics: Stability in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Homsy, George M. [Univ. of California, Santa Barbara, CA (United States). Department of Mechanical and Environmental Engineering

    2014-02-12

    We summarize our research results in three main areas: coating flows; electrohydrodynamics of drops; and wetting and spreading of drops. Experimental, computational and analytical methods are used to address a variety of issues. Coating flow studies include the effect of roughness, surfactants, and adsorbed particles on the dynamics of dip-coating. Electrohydrodynamic studies include drop deformation in uniform electric fields, shape distortion due to charge convection in sedimenting drops, and driving chaotic advection by either an electric field inclined to the direction of drop motion or time-periodic changes in the direction of the electric field. Heat and mass transport from chaotically mixed droplets exhibit unexpected and remarkable increases in the rates of transport. Finally, we develop an analytical solution to the problem of a static droplet, and use numerical techniques to predict its migration due to surface tension gradients.

  19. Lifetime of Bentonites study: hydrothermal stability of saponites; Estudio de longevidad en bentonitas: estabilidad hidrotermal de saponitas

    Energy Technology Data Exchange (ETDEWEB)

    Leguey, S.; Cuevas, J.; Garralon, A. [Universidad Autonoma de Madrid, Facultad de Ciencias, Departamento de Quimica Agricola, Geologia y Geoquimica, Madrid (Spain)

    1996-10-01

    The report studies the lifetime of bentonite and the hydrothermal stability of saponites. The testing comprised determination of physical and chemical properties of clays, the stability of the mineral porosity, lifetime and the wall of clay.

  20. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    International Nuclear Information System (INIS)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B.

    2015-01-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  1. Comparative study of gum arabic and PVP as stabilizing agents for synthesis of gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andressa A.; Leal, Jessica; Geraldes, Adriana N.; Lugao, Ademar B., E-mail: andressa_alvess@yahoo.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Use Colloidal metallic nanoparticles such as gold nanoparticles have received a great attention, due in part to their specific properties and potential applications. Control of size and uniformity of nanoparticles is important to prevent aggregation. High-molecular-weight polymers were used as stabilizer agents. Natural polymers, such as gum Arabic, are used as stabilizer because of capping nanoparticles behavior and present advantages such as solubility, non- toxicity and its compatibility for pharmaceutical and biomedical applications. Previous studies showed that the hydrophilic group of Poly(vinyl pyrrolidone) (PVP) caused repulsion on gold nanoparticles surface because steric interactions with polymer, for this reason this kind of polymers could be used as stabilizer agent. The aim of this work is to study the synthesis and stabilization of gold nanoparticles with PVP and gum Arabic using gamma radiation. The results obtained by samples analysis using UV-Visible showed that the gamma irradiation doses influenced the nanoparticles formation by PVP but that is not the case with the GA, because for smaller quantity of Arabic gum in different doses produced and stabilized nanoparticles. The samples were observed for 20 days and showed stability. We have obtained preliminary results showed that the use of radiation is applicable to the formation of gold nanoparticles. (author)

  2. Librarian documents stabilization: experimental studies and implementation perspectives

    Directory of Open Access Journals (Sweden)

    Zatoka L.

    2016-01-01

    Full Text Available The article reviews various methods of documents protection against the destroying effect of micromycetes. The methods considered have been in use since the third decade of the 20th century. The authors provide information on the search of new disinfectants from the list recommended by the Ministry of Health of Ukraine. In particular, these include nipagin and a new product "Valeus-D" (analog of the investigated earlier Polidez. The received results of study of minimal concentrations of Valeus-D disinfectant alcohol and water solutions having effect on microscopic fungi are analyzed. Data on the influence of nipagin, "Valeus-D" and 70% ethanol on resistance to fungi, chemical and physicomechanical characteristics of model samples of four types of paper (rag, typographical, offset, newsprint are compared. The experiments’ results indicate, that 1% nipagin, 2% and 4% "Valeus-D"(pH 9 render the highest resistance to fungi. It is revealed, that 70% ethyl alcohol and 1% nipagin had the least influence on the physicomechanical properties of model samples of paper. Accentuated is the need to continue pilot studies of the use of other modern effective disinfectants and other types of paper

  3. Molecular biological study on genetic stability of the genome

    International Nuclear Information System (INIS)

    Hori, Tada-aki; Takahashi, Ei-ichi; Tsuji, Hideo; Tsuji, Satsuki

    1989-01-01

    A population cytogenetic study has been performed in 1022 healthy subjects and 547 cancer patients to determine baseline frequencies of autosomal rate fragile sites. Out of 17 rare autosomal fragile sites defined in HBM9 (1985), the following six were detected: fra(2)(q11), fra(10)(q25), fra(11)(q13), fra(11)(q23), fra(16)(q22) and fra(17)(q12). Other three new fragile sites were also detected: fra(8)(q24.1), fra(11)(q15.1) and fra(16)(p12.1). They were all distamycin A-inducible and located at the junctions of G/R-bands. The incidence of these autosomal fragile sites was 5% in both healthy subjects and cancer patients. Distamycin A-induced fragile sites may play a role in the etiology of leukemia, myeloproliferative disorders, and gynecological tumors. The present study also examined the mechanism of fragile X expression associated with fragile X syndrome in thymidine-prototrophic and auxotrophic human-mouse somatic cell hybrids. In these hybrid cells, both low and high thymidylate stresses were found to be effective in inducing fragile X expression, even in a hybrid clone that retained a fragile X chromosome as the only human chromosome. An addition of deoxycytidine completely abolished the effect of high thymidylate stress achieved by excess amounts of thymidine. It is concluded that the expression is an intrinsic property of the fragile X mutation resulting from chromosomal change in a special class of replicons with polypurine/polypyrimidine DNA sequence. (Namekawa, K)

  4. Study of vibrations and stabilization of linear collider final doublets at the sub-nanometer scale

    International Nuclear Information System (INIS)

    Bolzon, B.

    2007-11-01

    CLIC is one of the current projects of high energy linear colliders. Vertical beam sizes of 0.7 nm at the time of the collision and fast ground motion of a few nanometers impose an active stabilization of the final doublets at a fifth of nanometer above 4 Hz. The majority of my work concerned vibrations and active stabilization study of cantilever and slim beams in order to be representative of the final doublets of CLIC. In a first part, measured performances of different types of vibration sensors associated to an appropriate instrumentation showed that accurate measurements of ground motion are possible from 0.1 Hz up to 2000 Hz on a quiet site. Also, electrochemical sensors answering a priori the specifications of CLIC can be incorporated in the active stabilization at a fifth of nanometer. In a second part, an experimental and numerical study of beam vibrations enabled to validate the efficiency of the numerical prediction incorporated then in the simulation of the active stabilization. Also, a study of the impact of ground motion and of acoustic noise on beam vibrations showed that an active stabilization is necessary at least up to 1000 Hz. In a third part, results on the active stabilization of a beam at its two first resonances are shown down to amplitudes of a tenth of nanometer above 4 Hz by using in parallel a commercial system performing passive and active stabilization of the clamping. The last part is related to a study of a support for the final doublets of a linear collider prototype in phase of finalization, the ATF2 prototype. This work showed that relative motion between this support and the ground is below imposed tolerances (6 nm above 0.1 Hz) with appropriate boundary conditions. (author)

  5. Scattering studies on cryoglobulins stability and aggregation properties

    Energy Technology Data Exchange (ETDEWEB)

    Bicev, R.N.; Oliveira, E.A.; Oliveira, C.L.P.; Brandao, H. [Universidade de Sao Paulo (USP), SP (Brazil); Andrade, L.E.C. [Universidade Federal de Sao Paulo (UNIFESP), SP (Brazil)

    2012-07-01

    Full text: Cryoglobulins are proteins of the immunoglobulin(Ig) type, which play an important role in infections, autoimmune diseases and neoplastic disorders[1]. When in abnormal concentrations in the blood, cryoglobulins can aggregate and precipitate at temperatures below 37 deg C, forming large complexes with dimensions in the range of 40 nm up to 1 {mu}m depending on the temperature, leading to damage of arteries and veins of small caliber. The objective of this study is to investigate the aggregation dynamics of cryoglobulin solutions through scattering techniques as SAXS (small angle X-Ray scattering). For the SAXS measures it was used the protein in aqueous and the system temperature was varied between 38:5 deg C and 4 deg C. The protein concentration was 10mg/mL.The GNOM [2] program was used for the first data analysis. This program performs the Fourier transform (IFT) of the scattering data, which provides the overall particle size, radius of gyration and some indications of the particle shape. The IFT analysis can be used to the so called ab initio modeling which provides a three-dimensional model for particle shape. This model was an attempt to obtain a real space representation for the particle system. Although it was possible to verify difference in the particle diameter for the different temperatures, the models provide a branched structure which can indicate polydispersity of shapes/sizes and also flexible structures. Interestingly, the construction of Kratky Plots, (I {center_dot} q{sup 2} vs q), which provide the compactness degree of a structure, indicated that the particles were highly flexible. Therefore another model procedure, which models the protein as polymer-like structure[3], have to be used. Using the recently developed Ensemble Optimization Method (EOM) [4] it was possible to obtain a very good fit for the experimental dataset, the distributions of radius of gyration and also three-dimensional representations of the possible

  6. Implant stability during initiation and resolution of experimental periimplantitis: an experimental study in the dog.

    Science.gov (United States)

    Sennerby, Lars; Persson, Leif G; Berglundh, Tord; Wennerberg, Ann; Lindhe, Jan

    2005-01-01

    Histologic studies have demonstrated the possibility to reestablish direct bone-implant contacts after ligature-induced periimplantitis. The influence of the reosseointegration on the stability of implants is not known. The aim of the present investigation was to study bone tissue and associated implant stability alterations that occurred during induction and resolution of periimplantitis using resonance frequency analysis (RFA), radiography, and histology. Three implants with smooth (turned) or roughened (SLA) surfaces were placed in each side of the edentulous mandible of four dogs. Experimental periimplantitis was induced for 3 months. Five weeks later, the animals were treated with antibiotics and surgical therapy and were followed for another 6 months. Periapical radiographs and RFA were used to evaluate marginal bone levels and implant stability throughout the study period. After termination, the tissue-implant interface was evaluated by light microscopy in ground sections. There was a linear relationship between radiographic and RFA findings because continuous loss of marginal bone and a decrease in implant stability were observed for both implant surfaces during the periimplantitis period. Antibiotic treatment and surgical therapy resulted in some reosseointegration, which was more marked for the SLA surface. The resonance frequency values corresponded well to the histometric measurements because reosseointegration resulted in an increase in implant stability. The findings from the present study indicate a linear relationship between marginal bone level and resonance frequency value. It is suggested that the RFA technique is sensitive and may be used to detect even a minor change in the level of bone-implant contact.

  7. Parametric study of the stability properties of a thermo hydraulic channel coupled to punctual kinetics

    International Nuclear Information System (INIS)

    Cecenas F, M.; Campos G, R.M.

    2005-01-01

    The reason of decay is the indicator of stability usually used in the literature to evaluate stability of boiling water reactors, however, in the operation of this type of reactors is considered the length of boiling like an auxiliary parameter for the evaluation of stability. In this work its are studied the variation of these two indicators when modifying a given an operation parameter in a model of a thermo hydraulic channel coupled to punctual kinetics, maintaining all the other input constant variables. The parameters selected for study are the axial profile of power, the subcooling, the flow of coolant and the thermal power. The study is supplemented by means of real data of plant using the one Benchmark of Ringhals, and the results for the case of the ratio of decay its are compared with the decay reasons obtained by means of autoregression models of the local instrumentation of neutron flux. (Author)

  8. Computational study of elements of stability of a four-helix bundle protein biosurfactant

    Science.gov (United States)

    Schaller, Andrea; Connors, Natalie K.; Dwyer, Mirjana Dimitrijev; Oelmeier, Stefan A.; Hubbuch, Jürgen; Middelberg, Anton P. J.

    2015-01-01

    Biosurfactants are surface-active molecules produced principally by microorganisms. They are a sustainable alternative to chemically-synthesized surfactants, having the advantages of being non-toxic, highly functional, eco-friendly and biodegradable. However they are currently only used in a few industrial products due to costs associated with production and purification, which exceed those for commodity chemical surfactants. DAMP4, a member of a four-helix bundle biosurfactant protein family, can be produced in soluble form and at high yield in Escherichia coli, and can be recovered using a facile thermal phase-separation approach. As such, it encompasses an interesting synergy of biomolecular and chemical engineering with prospects for low-cost production even for industrial sectors. DAMP4 is highly functional, and due to its extraordinary thermal stability it can be purified in a simple two-step process, in which the combination of high temperature and salt leads to denaturation of all contaminants, whereas DAMP4 stays stable in solution and can be recovered by filtration. This study aimed to characterize and understand the fundamental drivers of DAMP4 stability to guide further process and surfactant design studies. The complementary use of experiments and molecular dynamics simulation revealed a broad pH and temperature tolerance for DAMP4, with a melting point of 122.4 °C, suggesting the hydrophobic core as the major contributor to thermal stability. Simulation of systematically created in silico variants of DAMP4 showed an influence of number and location of hydrophilic mutations in the hydrophobic core on stability, demonstrating a tolerance of up to three mutations before a strong loss in stability occurred. The results suggest a consideration of a balance of stability, functionality and kinetics for new designs according to their application, aiming for maximal functionality but at adequate stability to allow for cost-efficient production using thermal

  9. Longitudinal Study of Nightmares in Children: Stability and Effect of Emotional Symptoms

    Science.gov (United States)

    Schredl, Michael; Fricke-Oerkermann, Leonie; Mitschke, Alexander; Wiater, Alfred; Lehmkuhl, Gerd

    2009-01-01

    Nightmares are defined as dreams with strong negative emotions which awaken the dreamer and are common during childhood: cross-sectional data shows the highest prevalence rates between the ages of five and ten. The present longitudinal study was designed to study the stability of nightmares over the course of 2 years. Sleep questionnaires and…

  10. Clinical study on the primary stability of two dental implant systems with resonance frequency analysis.

    Science.gov (United States)

    Rabel, Annette; Köhler, Steffen Gerhard; Schmidt-Westhausen, Andrea Maria

    2007-09-01

    Primary stability has a major impact on the long-term success of dental implants. The aim of this study was to investigate the correlation of resonance frequency analysis (RFA) and insertion torque of self-tapping and non-self-tapping implants and their respective differences in primary stability. A group of 263 patients were treated with a total of 602 conically formed dental implants: 408 non-self-tapping Ankylos and 194 self-tapping Camlog. The maximum insertion torque during implant placement was recorded. Resonance frequency, measured as the implant stability quotient (ISQ), was assessed once immediately after insertion and twice 3 months later. Torque values of the non-self-tapping implants were significantly higher than those in the self-tapping group (p = 0.023). RFA did not show differences between the 2 groups (p = 0.956), but a correlation between ISQ values after implantation and 3 months after implant placement was measured (r = 0.712). Within the implant systems, no correlation between insertion torque and resonance frequency values could be determined (r = 0.305). Our study indicates that the ISQ values obtained from different implant systems are not comparable. The RFA does not appear suitable for the evaluation of implant stability when used as a single method. Higher insertion torque of the non-self-tapping implants appeared to confirm higher clinical primary stability.

  11. Wastewater Sludge Stabilization Using Lime A Case Study of West Ahwaz Wastewater Treatment Plant

    Directory of Open Access Journals (Sweden)

    Mehdi Farzadkia

    2009-01-01

    Full Text Available Lime stabilization is a chemical method used for wastewater sludge stabilization. It is capable of decreasing large quantities of pathogens and of preventing microbial degradation of sludge organic materials. The main objective of the present experimental research was to investigate stabilization of the sludge from west Ahwaz wastewater treatment plant by lime addition and to control if the microbial quality of this sludge conforms to the USEPA standards for sludge reuse and safe disposal. The study was carried out on a pilot scale in 5 stages over a period of 12 months (July 2005 to June 2006 at west Ahwaz wastewater treatment plant laboratory using raw sludge. For the purposes of this study, a 30-liter reactor was commissioned and loaded with sludge and appropriate quantities of hydrated lime were added based on the solid waste percent. The parameters used to determine stabilization efficiency were pH, Total Coliform, Fecal Coliform, and parasite eggs. The results showed that lime addition at a ratio of 265g Ca(OH2/kg. ds was the optimum level for sludge stabilization in westAhwazwastewater treatment plant, which is acceptable from both economic and technical viewpoints. The method is capable of achieving class B but never satisfied class A of USEPA standards.

  12. Dynamic Voltage Stability Studies using a Modified IEEE 30-Bus System

    Directory of Open Access Journals (Sweden)

    Oluwafemi Emmanuel Oni

    2016-09-01

    Full Text Available Power System stability is an essential study in the planning and operation of an efficient, economic, reliable and secure electric power system because it encompasses all the facet of power systems operations, from planning, to conceptual design stages of the project as well as during the systems operating life span. This paper presents different scenario of power system stability studies on a modified IEEE 30-bus system which is subjected to different faults conditions. A scenario whereby the longest high voltage alternating current (HVAC line is replaced with a high voltage direct current (HVDC line was implemented. The results obtained show that the HVDC line enhances system stability more compared to the contemporary HVAC line. Dynamic analysis using RMS simulation tool was used on DigSILENT PowerFactory.

  13. NONLINEAR MODEL OF STABILITY STUDY OF SYSTEM "SURFACE CONTROL – ACTUATOR" OF MANEUVERABLE UNMANNED AERIAL VEHICLE

    Directory of Open Access Journals (Sweden)

    V. N. Akimov

    2017-01-01

    Full Text Available One of the important problems of the designing of maneuverable unmanned aerial vehicles (UAV is to ensure aeroelastic stability with automatic control system (ACS. One of the possible types of aeroelastic instability of UAV with ACS is loss of stability in the system "surface control – actuator".  A nonlinear model for the study of the stability of the system "surface control – actuator" is designed for solving problems of joint design of airframe and ACS with the requirements of aeroelasticity. The electric actuator is currently the most widely used on highly maneuverable UAV. The wide bandwidth and the availability of frequency characteristic lifts are typical for the modern electric actuator. This exacerbates the problem of providing aeroelastic stability of the UAV with ACS, including the problem of ensuring the stability of the system "surface control – actuator". In proposed model the surface control, performing bending-torsion oscillations in aerodynamic flow, in fact, is the loading for the actuator. Experimental frequency characteristics of the isolated actuator, obtained for different levels of the control signal, are used for the mathematical description of the actuator, then, as dynamic hinge moment, which is determined by aeroelastic vibrations of the surface control in the air flow, is calculated. Investigation of the stability of the system "surface control – actuator" is carried out by frequency method using frequency characteristics of the open-loop system. The undeniable advantage of the proposed model is the simplicity of obtaining the transfer functions of the isolated actuator. The experiment by its definition is a standard method of determining frequency characteristics of the actuator in contrast to time-consuming experiments for determining the dynamic stiffness of the actuator (with the surface control or the transfer function of the actuator using electromechanical simulation of aeroelastic loading of the

  14. Stability analysis of a recycling circuit of a BWR type reactor. Theoretical study

    International Nuclear Information System (INIS)

    Salinas H, J.G.; Espinosa P, G.; Gonzalez M, V.M.

    2000-01-01

    The Technology, Regulation and Services Management of the National Commission of Nuclear Safety and Safeguards financed and in coordinate form with the I.P.H. Department of the Metropolitan Autonomous-Iztapalapa University developed the present project with the purpose of studying the effect of the recycling system on the linear stability of a BWR reactor whose reference central is the Laguna Verde power station. The present project forms part of a work series focused to the linear stability of the nuclear reactor of the Unit 1 at Laguna Verde power station. The components of the recycling system considered for the study of stability are the recycling external circuit (recycling pumps, valves) and the internal circuit (downcomer, jet pumps, lower full, driers, separators). The mathematical model is obtained applying mass balances and movement quantity in each one of the mentioned circuits. With respect to the nucleus model two regions are considered, the first one is made of a flow in one phase and the second one of a flow in two phases. For modelling the biphasic region it is considered homogenous flow. Generally it is studied the system behavior in the frequency domain starting from the transfer function applied to four operational states which correspond to the lower stability zone in the map power-flow of the Unit 1 of Laguna Verde power station. The Nyquist diagrams corresponding to each state as well as their characteristic frequency were determined. The results show that exists a very clear dependence of the power-flow relation on the stability of the system. It was found that the boiling length is an important parameter for the linear stability of the system. The obtained results show that the characteristic frequencies in unstability zones are similar to the reported data of the Unit 1 of the Laguna Verde power station in the event of power oscillations carried out in January 1995. (Author)

  15. Linear stability of a fuel channel uniformly heated considering retrofeeding by vacuum. Theoretical study

    International Nuclear Information System (INIS)

    Gonzalez M, V.; Salinas H, J.G.; Espinosa P, G.

    2000-01-01

    The Technology, Regulation and Services Management of the National Commission of Nuclear Safety and Safeguards in coordinated form with the IPH Department of the Metropolitan Autonomous-Iztapalapa University, developed the present project to study the linear stability in a fuel channel uniformly heated with effects of retrofeeding by vacuums. In this study the methodology used in the analysis of linear stability of the nuclear reactor unit 1 at Laguna Verde power plant is described which represented by an average channel uniformly heated. The conceptual model consists of two cells which represent the two regions in which is divided the channel according to the cooling is in one and two phases, considering the boiling length dependent in the time. It is used the homogeneous flux models for describing the thermohydraulic behavior of the cooling in the two phases region. The neutron processes with the punctual model of the neutron kinetics with a group of retarded neutrons precursors are described. It is studied the behavior of the system in the frequency domain with the transfer functions obtained and it is characterized in four operation states corresponding to the four corners of the low stability zone in the map power-flow Laguna Verde power plant. For these operation states the characteristic frequency is determined and the corresponding Nyquist diagrams are obtained. The results show that the system stability depends on the power-flow relation and that the operations which implicate a reduction of this relation improve the stability of the system (reducing the power introducing control bars with constant cooling flow or increase cooling flow with bars pattern established). The obtained results with effects of retrofeeding by vacuums show that the value of the characteristic frequency is modified very little with respect to the model without retrofeeding, therefore the thermohydraulic processes seem to determine the response of the stability of the system

  16. Experimental study of silty clay stabilization with cement and lime in multan, pakistan

    International Nuclear Information System (INIS)

    Sultan, T.

    2014-01-01

    Stabilization is valuable substitute for advancing the soil characteristics. The engineering features gained after stabilization differs broadly owing to non-uniformity in constitutions of soil. This study describes an assessment of cement and lime additives for advancing soils ventures. The effectiveness of lime and cement stabilization on geotechnical characteristics of the in situ soil has also been described in the paper. The additives like cement and lime were added in different dosage rates to examine the change in properties of the in situ soil. Cement addition caused an increase in unconfined compression strength (UCS) throughout from 4% to 16% of cement. Moreover, it has been observed that by adding lime, the early strength of clay increases up to 6% of lime but for long term strength i.e. 28 days maximum strengths is achieved for 4% of lime. It also confirms that with more percentage of lime and longer duration of curing, it expands. In addition to the strength behavior of samples at various percentages of cement and lime, the deflection at failure point was also examined. In order to make a straight comparison, both cement and lime stabilized soils were also tested in laboratory. Generally, the performance of Portland cement-stabilized soils was advanced to lime in the experiments performed. (author)

  17. A study of product stability of commercial probiotic fermented milk and yoghurt

    OpenAIRE

    Liu, Xiaojiao

    2011-01-01

    In this study, the stability of three probiotic fermented milk products (‘Cultura Naturell’, ‘Biola Syrnet Lettmelk Naturell’ and ‘Biola Pluss Yoghurt Mild Naturell’) produced by TINE BA was studied and samples from each production were studied at three different times within designated shelf-life. The study focused mainly on the viability of probiotic bacteria during storage, which is a key criterion for quality evaluation of probiotic dairy products. Other parameters (pH, viscosity, organic...

  18. A new experimental approach to study the stability of logistic map

    International Nuclear Information System (INIS)

    Rani, Mamta; Agarwal, Rashi

    2009-01-01

    Remarkably benign looking logistic transformations x n+1 = rx n (1 - x n ) for choosing x 0 between 0 and 1 and 0 < r ≤ 4 have found a celebrated place in chaos, fractals and discrete dynamics. The purpose of this paper is to enhance the capabilities of logistic map via superior iterations. Stability of logistic map has been studied by running computer programs. Logistic map is stable for 0 < r ≤ 3.2 in Picard orbit. In superior orbit, we see that the range of stability of logistic map increases drastically. Also, chaotic behavior of logistic map disappears in certain cases.

  19. Stability Estimates for a Twisted Rod Under Terminal Loads: A Three-dimensional Study

    KAUST Repository

    Majumdar, Apala

    2012-03-01

    The stability of an inextensible unshearable elastic rod with quadratic strain energy density subject to end loads is considered. We study the second variation of the corresponding rod-energy, making a distinction between in-plane and out-of-plane perturbations and isotropic and anisotropic cross-sections, respectively. In all cases, we demonstrate that the naturally straight state is a local energy minimizer in parameter regimes specified by material constants. These stability results are also accompanied by instability results in parameter regimes defined in terms of material constants. © 2012 Springer Science+Business Media B.V.

  20. Nonlinear stability and control study of highly maneuverable high performance aircraft, phase 2

    Science.gov (United States)

    Mohler, R. R.

    1992-01-01

    This research should lead to the development of new nonlinear methodologies for the adaptive control and stability analysis of high angle-of-attack aircraft such as the F18 (HARV). The emphasis has been on nonlinear adaptive control, but associated model development, system identification, stability analysis and simulation is performed in some detail as well. Various models under investigation for different purposes are summarized in tabular form. Models and simulation for the longitudinal dynamics have been developed for all types except the nonlinear ordinary differential equation model. Briefly, studies completed indicate that nonlinear adaptive control can outperform linear adaptive control for rapid maneuvers with large changes in alpha. The transient responses are compared where the desired alpha varies from 5 degrees to 60 degrees to 30 degrees and back to 5 degrees in all about 16 sec. Here, the horizontal stabilator is the only control used with an assumed first-order linear actuator with a 1/30 sec time constant.

  1. The study of stability, combustion characteristics and performance of water in diesel emulsion fuel

    Directory of Open Access Journals (Sweden)

    Syafiq Zulkifli

    2017-01-01

    Full Text Available A single cylinder diesel engine study of water in diesel emulsions was conducted to investigate the stability effect of emulsion fuel on three different fuel blends and the water emulsification effect on the engine performance. Emulsified fuels contained 2% of surfactant including Span 80 Tween 80 and tested 10 HLB number. The blends also varied of 5%, 10% and 15% of water in diesel ratios namely as BSW5, BSW10 and BSW15. The fuel blends performance was tested using a single cylinder, direct injection diesel engine, operating at 1860 rpm. The results on stability reveal that high shear homogenizer yields more stability on emulsion fuel than mechanical stirrer and ultrasonic water bath. The engine performance results show that the ignition delay and peak pressure increase with the increment of water percentage up to 15%. However, the results indicate the increment of water percentage is also shows a significant decrease in engine power.

  2. Western Wind and Solar Integration Study Phase 3 – Frequency Response and Transient Stability

    Energy Technology Data Exchange (ETDEWEB)

    Miller, N. W. [GE Energy Management, Schenectady, NY (United States); Shao, M. [GE Energy Management, Schenectady, NY (United States); Pajic, S. [GE Energy Management, Schenectady, NY (United States); D' Aquila, R. [GE Energy Management, Schenectady, NY (United States)

    2014-12-01

    Power system operators and utilities worldwide have concerns about the impact of high-penetration wind and solar generation on electric grid reliability (EirGrid 2011b, Hydro-Quebec 2006, ERCOT 2010). The stability of North American grids under these conditions is a particular concern and possible impediment to reaching future renewable energy goals. Phase 3 of the Western Wind and Solar Integration Study (WWSIS-3) considers a 33% wind and solar annual energy penetration level that results in substantial changes to the characteristics of the bulk power system, including different power flow patterns, different commitment and dispatch of existing synchronous generation, and different dynamic behavior of wind and solar generation. WWSIS-3 evaluates two specific aspects of fundamental frequency system stability: frequency response and transient stability.

  3. Study on Roll Instability Mechanism and Stability Index of Articulated Steering Vehicles

    Directory of Open Access Journals (Sweden)

    Xuefei Li

    2016-01-01

    Full Text Available This study examines the roll instability mechanism and stability index of articulated steering vehicles (ASVs by taking wheel loaders as the research object. A seven-degree-of-freedom nonlinear dynamics model of the ASVs is built on the basis of multibody dynamics. A physical prototype model of an ASV is designed and manufactured to validate the dynamic model. Test results reasonably agree with the simulation results, which indicates that the established dynamic model can reasonably describe ASV movements. Detailed analysis of the rollover stability of the wheel loader is performed with the use of the established dynamic model. Analysis results show that rollover will occur when the roll angular velocity exceeds a critical threshold, which is affected by lateral acceleration and slope angle. On this basis, a dynamic stability index applicable to the ASVs is presented.

  4. Formulation studies on stability of solid-state proteases for detergent applications

    DEFF Research Database (Denmark)

    Ay, Suzan Biran; Jensen, Anker Degn; Kiil, Søren

    2012-01-01

    Enzymes are one of the most important components in the laundry detergents. They effectively contribute to the washing process by decreasing energy and water consumption, reducing environmental load of detergent products, leaving non-toxic water effluents and providing fabric care. Ensuring proper...... storage stability of enzyme granulates in the chemically hostile detergent matrix is a major challenge. It is believed that the main factors responsible for activity loss are humidity and H2O2 released from the bleaching agents. In this study, the mechanism and inactivation kinetics of freeze......-dried detergent protease, Savinase, were determined in a newly developed experimental setup, providing rapid assessment of solid-state enzyme stability under oxidizing conditions. The method was based on exposure of an enzyme column to known concentrations of H2O2 (g) and humidity in a thermally stabilized...

  5. A Study on Stability of Limit Cycle Walking Model with Feet: Parameter Study

    Directory of Open Access Journals (Sweden)

    Yonggwon Jeon

    2013-01-01

    Full Text Available In this paper, two kinds of feet, namely, curved and flat feet, are added to limit cycle walking model to investigate its stability properties. Although both models are already proposed and are investigated, most previous works are focused on efficiency and gait behaviors. Only the stability properties of the simplest walking model conceived Garcia et al. are well defined. Therefore, there is still a need for a precise research on the effect of feet, especially in the view of local stability, bifurcation route to chaos, global stability, falling boundary and energy balance line. Therefore, this article revisits the stability analysis of limit cycle walking model with various foot shape. To analyze the effects of feet, we re-derive the equation of motion of modified models by adding one more parameter of foot shape than the simplest walking model. Also, the falling boundary and energy balance line of modified models are derived to get proper initial conditions for stable walking and to explain global stability. Simulation results show us that the curved feet can enlarge both stable walking range and area of basin of attraction while the case of flat feet depends on foot shape parameter.

  6. Longitudinal Stability Study for the FACET-II e+ Damping Ring

    Energy Technology Data Exchange (ETDEWEB)

    Bane, Karl [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-11-29

    This is an initial study of the longitudinal, single-bunch stability in the proposed FACET-II e+ damping ring. It is preliminary because, at present, only a few specific features of the vacuum chamber are known.

  7. LONG TERM STABILITY STUDY AT FNAL AND SLAC USING BINP DEVELOPED HYDROSTATIC LEVEL SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Seryi, Andrei

    2003-05-28

    Long term ground stability is essential for achieving the performance goals of the Next Linear Collider. To characterize ground motion on relevant time scales, measurements have been performed at three geologically different locations using a hydrostatic level system developed specifically for these studies. Comparative results from the different sites are presented in this paper.

  8. Aggregated Modelling for Wind Farms for Power System Transient Stability Studies

    DEFF Research Database (Denmark)

    Liu, Hongzhi; Chen, Zhe

    2012-01-01

    to detailed modelling that models every wind turbines individually and the interconnections among them. In this paper, three aggregated modelling techniques, namely, multi-machine equivalent aggregation, full aggregation and semi-aggregation are presented for power system transient stability studies based...

  9. A comparative study of vertical stabilities in the Arabian sea and Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Sastry, J.S.; Rao, D.P.

    Stabilities in the upper 300 m in the Arabian Sea and the Bay of Bengal are computed and presented seasonwise. The water column in the Bay of Bengal is more strongly stratified than that in the Arabian Sea. These studies suggest that the vertical...

  10. The defect structure of yttria-stabilized zirconia, studied by quasielastic diffuse neutron scattering

    DEFF Research Database (Denmark)

    Andersen, Niels Hessel; Clausen, Kurt Nørgaard; Hackett, M. A.

    1986-01-01

    The static defect structure of the oxygen ion conductor Y2O3 stabilized zirconia has been studied at room temperature by coherent diffuse neutron scattering from single crystal samples containing nominally 9.4, 12, 15 and 18 mol% Y2O3. There are two principal contributions to the observed diffuse...

  11. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

    DEFF Research Database (Denmark)

    Gevorgyan, Suren; Medford, Andrew James; Bundgaard, Eva

    2011-01-01

    O (nanoparticulate, thin film) were employed as electron transport layers. The devices were all tested at Risø DTU and the functional devices were subjected to an inter-laboratory study involving the performance and the stability of modules over time in the dark, under light soaking and outdoor conditions. 24...

  12. Numerical experiments in the stability of leading edge boundary layer flow. A two-dimensional study

    NARCIS (Netherlands)

    Theofilis, Vassilios; Theofilis, V.

    1993-01-01

    A numerical study is performed in order to gain insight to the stability of the infinite swept attachment line boundary layer. The basic flow is taken to be of the Hiemenz class with an added cross-flow giving rise to a constant thickness boundary layer along the attachment line. The full

  13. Diagnostic stability among chronic patients with functional psychoses: an epidemiological and clinical study

    Directory of Open Access Journals (Sweden)

    Jakobsen Klaus D

    2007-08-01

    Full Text Available Abstract Background Diagnostic stability and illness course of chronic non-organic psychoses are complex phenomena and only few risk factors or predictors are known that can be used reliably. This study investigates the diagnostic stability during the entire course of illness in patients with non-organic psychoses and attempts to identify non-psychopathological risk factors or predictors. Method 100 patients with functional psychosis were initially characterised using the Operational Criteria Checklist for Psychotic Illness and Affective Illness (OPCRIT, medical records and health registers. To study the stability of diagnoses (i.e. shifts per time, we used registry data to define four measures of diagnostic variation that were subsequently examined in relation to four possible measures of time (i.e. observation periods or hospitalisation events. Afterwards, we identified putative co-variables and predictors of the best measures of diagnostic stability. Results All four measures of diagnostic variation are very strongly associated with numbers-of-hospitalisations and less so with duration-of-illness, duration-of-hospitalisation and with year-of-first-admission. The four measures of diagnostic variation corrected for numbers-of-hospitalisations were therefore used to study the diagnostic stability. Conventional predictors of illness course – e.g. age-of-onset and premorbid-functioning – are not significantly associated with stability. Only somatic-comorbidity is significantly associated with two measures of stability, while family-history-of-psychiatric-illness and global-assessment-of-functioning (GAF scale score show a trend. However, the traditional variables age-of-first-admission, civil-status, first-diagnosis-being-schizophrenia and somatic-comorbidity are able to explain two-fifth of the variation in numbers-of-hospitalisations. Conclusion Diagnostic stability is closely linked with the contact between patient and the healthcare system

  14. Development of probiotic tablets using microparticles: viability studies and stability studies.

    Science.gov (United States)

    e Silva, J P Sousa; Sousa, Sérgio C; Costa, Paulo; Cerdeira, Emília; Amaral, Maria H; Lobo, José Sousa; Gomes, Ana M; Pintado, Maria M; Rodrigues, Dina; Rocha-Santos, Teresa; Freitas, Ana C

    2013-03-01

    Alternative vectors to deliver viable cells of probiotics, to those conferring limited resistance to gastrointestinal conditions, still need to be sought. Therefore the main goal of the study was to develop tablets able to protect entrapped probiotic bacteria from gastric acidity, thus providing an easily manufacturing scale-up dosage form to deliver probiotics to the vicinity of the human colon. Whey protein concentrate microparticles with Lactobacillus paracasei L26 were produced by spray-drying and incorporated in tablets with cellulose acetate phthalate and sodium croscarmellose. The viability of L. paracasei L.26 throughout tableting as well as its gastric resistance and release from the tablets were evaluated. Storage stability of L. paracasei L26 tablets was also performed by evaluation of viable cells throughout 60 days at 23°C and 33% relative humidity. A decrease of approximately one logarithmic cycle was observed after the acid stage and the release of L. paracasei L26 from the tablets occurred only after 4 h in the conditions tested. Microencapsulated L. paracasei L26 in tablets revealed some susceptibility to the storage conditions tested since the number of viable cells decreased 2 log cycles after 60 days of storage. However, the viability of L. paracasei L26 after 45 days of storage did not reveal significant susceptibility upon exposure to simulated gastrointestinal conditions. The developed probiotic tablets revealed to be potential vectors for delivering viable cells of L. paracasei L26 and probably other probiotics to persons/patients who might benefit from probiotic therapy.

  15. Validation of analytical methods for the stability studies of naproxen suppositories for infant and adult use

    International Nuclear Information System (INIS)

    Rodriguez Hernandez, Yaslenis; Suarez Perez, Yania; Garcia Pulpeiro, Oscar

    2011-01-01

    Analytical and validating studies were performed in this paper, with a view to using them in the stability studies of the future formulations of naproxen suppositories for children and adults. The most influential factors in the naproxen stability were determined, that is, the major degradation occurred in acid medium, oxidative medium and by light action. One high-performance liquid chromatography-based method was evaluated, which proved to be adequate to quantify naproxen in suppositories and was selective against degradation products. The quantification limit was 3,480 μg, so it was valid for these studies. Additionally, the parameters specificity for stability, detection and quantification limits were evaluated for the direct semi-aqueous acid-base method, which was formerly validated for the quality control and showed satisfactory results. Nevertheless, the volumetric methods were not regarded as stability indicators; therefore, this method will be used along with the chromatographic methods of choice, that is, thin-layer chromatography and highperformance liquid chromatography, to determine the degradation products

  16. Influence of atmospheric stability on wind-turbine wakes: A large-eddy simulation study

    Science.gov (United States)

    Abkar, Mahdi; Porté-Agel, Fernando

    2014-05-01

    In this study, large-eddy simulation is combined with a turbine model to investigate the influence of atmospheric stability on wind-turbine wakes. In the simulations, subgrid-scale turbulent fluxes are parameterized using tuning-free Lagrangian scale-dependent dynamic models. These models optimize the local value of the model coefficients based on the dynamics of the resolved scales. The turbine-induced forces are parameterized with an actuator-disk model with rotation. In this technique, blade-element theory is used to calculate the lift and drag forces acting on the blades. Emphasis is placed on the structure and characteristics of wind-turbine wakes in the cases where the incident flows to the turbine have the same mean velocity at the hub height but different stability conditions. The simulation results show that atmospheric stability has a significant effect on the spatial distribution of the mean velocity deficit and turbulent fluxes in the wake region. In particular, the magnitude of the velocity deficit increases with increasing stability in the atmosphere. In addition, the locations of the maximum turbulence intensity and turbulent stresses are closer to the turbine in convective boundary layer compared with neutral and stable ones. Detailed analysis of the resolved turbulent kinetic energy (TKE) budget inside the wake reveals also that the thermal stratification of the incoming wind considerably affects the magnitude and spatial distribution of the turbulent production, transport term and dissipation rate (transfer of energy to the subgrid scales). It is also shown that the near-wake region can be extended to a farther distance downstream in stable condition compared with neutral and unstable counterparts. In order to isolate the effect of atmospheric stability, additional simulations of neutrally-stratified atmospheric boundary layers are performed with the same turbulence intensity at hub height as convective and stable ones. The results show that the

  17. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies

    DEFF Research Database (Denmark)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus

    2015-01-01

    , if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. The accelerated stability studies performed in the microwave oven using...... a design of experiments (DoE) approach in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric......, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating...

  18. Thermogravimetric studies of the thermo- oxidative stability of irradiated and unirradiated polyethylene—II. combined antioxidants

    Science.gov (United States)

    Novaković, Lj.; Gal, O.; Marković, V.; Stannett, V. T.

    In part one of this series the effects of a phenolic, an amine and a thioester antioxidant on the thermo-oxidative stability of irradiated and unirradiated low-density polyethylene was reported. In this paper the effects of combined phenolic and thioester stabilizers are described. Isothermal thermogravimetric analysis was used to study the systems. Pronounced synergism was observed with the induction periods, the time when the initial weight loss begins and the 5% weight loss. At about 50% of each stabilizer increases greater than twofold were observed both with the unirradiated and irradiated polymers. The rate constants for oxygen uptake were decreased. However, the rates of degradation at 5% weight loss fell between the values of the two pure stabilizers with no pronounced synergism in either case. In the absence of oxygen little effect of either antioxidant or their mixtures was observed. The corresponding activation energies were somewhat higher, however, with the irradiated samples containing antioxidants. Dynamic thermogravimetry was used for this study. A kinetic analysis indicated that there were somewhat different modes of degradation at lower- and higher- temperature ranges.

  19. Synthesis and formulation studies of griseofulvin analogues with improved solubility and metabolic stability.

    Science.gov (United States)

    Petersen, Asger B; Andersen, Nikolaj S; Konotop, Gleb; Hanafiah, Nur Hafzan Md; Raab, Marc S; Krämer, Alwin; Clausen, Mads H

    2017-04-21

    Griseofulvin (1) is an important antifungal agent that has recently received attention due to its antiproliferative activity in mammalian cancer cells. Comprehensive SAR studies have led to the identification of 2'-benzyloxy griseofulvin 2, a more potent analogue with low micromolar anticancer potency in vitro. Analogue 2 was also shown to retard tumor growth through inhibition of centrosomal clustering in murine xenograft models of colon cancer and multiple myeloma. However, similar to griseofulvin, compound 2 exhibited poor metabolic stability and aqueous solubility. In order to improve the poor pharmacokinetic properties, 11 griseofulvin analogues were synthesized and evaluated for biological activity and physiological stabilities including SGF, plasma, and metabolic stability. Finally, the most promising compounds were investigated in respect to thermodynamic solubility and formulation studies. The 2'-benzylamine analogue 10 proved to be the most promising compound with low μM in vitro anticancer potency, a 200-fold increase in PBS solubility over compound 2, and with improved metabolic stability. Furthermore, this analogue proved compatible with formulations suitable for both oral and intravenous administration. Finally, 2'-benzylamine analogue 10 was confirmed to induce G2/M cell cycle arrest in vitro. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  20. Nepenthes khasiana mediated synthesis of stabilized gold nanoparticles: Characterization and biocompatibility studies.

    Science.gov (United States)

    Dhamecha, Dinesh; Jalalpure, Sunil; Jadhav, Kiran

    2016-01-01

    The current study summarizes a unique green process for the synthesis of gold nanoparticles by simple treatment of gold salts with aqueous extract of Nepenthes khasiana (NK)--a red listed medicinal plant and its characterization. Study on the effect of different process parameters like temperature, pH and stirring on surface and stability characteristics has been demonstrated. Formation of GNPs was visually observed by change in color from colorless to wine red and characterized by UV-Visible spectroscopy, FT-IR spectroscopy, Zetasizer, X-RD, ICP-AES, SEM-EDAX, AFM and TEM. In vitro stability studies of gold colloidal dispersion in various blood components suggest that, NK mediated GNPs exhibit remarkable in vitro stability in 2% bovine serum albumin, 2% human serum albumin (HSA), 0.2M histidine, and 0.2M cysteine but unstable in 5% NaCl solution and acidic pH. Biocompatibility of NK stabilized GNPs against normal mouse fibroblasts (L929) cell lines revealed nontoxic nature of GNPs and thus provides exceptional opportunities for their uses as nanomedicine for diagnosis and drug therapy. The role of antioxidant phytochemicals (flavonoids and polyphenols) of NK extract in synthesis of biocompatible and stabilized GNPs was demonstrated by estimating total flavonoid content, total phenolic content and total antioxidant capacity of extract before and after formation of GNPs. Fast and easy synthesis of biocompatible GNPs possesses unique physical and chemical features which serve as an advantage for its use in various biomedical applications. The overall approach designated in the present research investigation for the synthesis of GNPs is based on all 12 principles of green chemistry, in which no man-made chemical other than the gold chloride was used. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Wind Turbine and Wind Power Plant Modelling Aspects for Power System Stability Studies

    DEFF Research Database (Denmark)

    Altin, Müfit; Hansen, Anca Daniela; Göksu, Ömer

    2014-01-01

    is not reasonable regarding the focus of the study. Therefore the power system operators should be aware of the modelling aspects of the wind power considering the related stability study and implement the required model in the appropriate power system toolbox. In this paper, the modelling aspects of wind turbines...... and wind power plants are reviewed for power system stability studies. Important remarks of the models are presented by means of simulations to emphasize the impact of these modelling details on the power system.......Large amount of wind power installations introduce modeling challenges for power system operators at both the planning and operational stages of power systems. Depending on the scope of the study, the modeling details of the wind turbine or the wind power plant are required to be different. A wind...

  2. Tunable release of clavam from clavam stabilized gold nanoparticles — Design, characterization and antimicrobial study

    International Nuclear Information System (INIS)

    Manju, V.; Dhandapani, P.; Gurusamy Neelavannan, M.; Maruthamuthu, S.; Berchmans, S.; Palaniappan, A.

    2015-01-01

    A facile one-step approach is developed to synthesize highly stable (up to 6 months) gold nanoparticles (GNPs) using Clavam, pharmaceutical form of amoxicillin which contains a mixture of amoxicillin and potassium salt of clavulanic acid, at room temperature (25–30 °C). The clavam stabilized GNPs are characterized using various techniques including UV–Visible, FT-IR spectrophotometry and transmission electron microscopy (TEM). Tunable release of clavam from clavam stabilized GNPs is demonstrated using intracellular concentrations of glutathione (GSH). The process is monitored using an UV–Vis spectroscopy and the amount of clavam released in terms of amoxicillin concentration is quantitatively estimated using reverse phase high performance liquid chromatographic (RP-HPLC) technique. In vitro study reveals that the clavam released from GNPs' surface was found to show a significant enhancement in antibacterial activity against Escherichia coli and the cause of enhancement is addressed. - Graphical abstract: Stable and nearly monodisperse gold nanoparticles (GNPs) are prepared at room temperature (~ 25–30 °C) using clavam; commercial form of amoxicillin antibiotic. Tunable release of clavam from clavam stabilized GNPs is demonstrated by the addition of varying concentrations of glutathione. Interactions between clavam and gold core are investigated in detail. The mechanism of enhanced antimicrobial activity of clavam released from clavam stabilized GNPs is probed. - Highlights: • Gold nanoparticles (GNPs) are prepared without reducing agent using antibiotic clavam TR . • Our work shed lights on the nature of interaction between the clavam and GNPs. • Sustained release of clavam from clavam stabilized GNPs is demonstrated using glutathione. • Antimicrobial activity of the released clavam is confirmed using various techniques. • Our study suggests that the clavam released from GNPs shows better inhibition of E. coli

  3. Tunable release of clavam from clavam stabilized gold nanoparticles — Design, characterization and antimicrobial study

    Energy Technology Data Exchange (ETDEWEB)

    Manju, V. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Dhandapani, P. [Corrosion Materials and Protection Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu, 630006 (India); Gurusamy Neelavannan, M. [Characterization and Measurement lab, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Maruthamuthu, S. [Corrosion Materials and Protection Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu, 630006 (India); Berchmans, S. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India); Palaniappan, A., E-mail: palani112@gmail.com [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamilnadu 630006 (India)

    2015-04-01

    A facile one-step approach is developed to synthesize highly stable (up to 6 months) gold nanoparticles (GNPs) using Clavam, pharmaceutical form of amoxicillin which contains a mixture of amoxicillin and potassium salt of clavulanic acid, at room temperature (25–30 °C). The clavam stabilized GNPs are characterized using various techniques including UV–Visible, FT-IR spectrophotometry and transmission electron microscopy (TEM). Tunable release of clavam from clavam stabilized GNPs is demonstrated using intracellular concentrations of glutathione (GSH). The process is monitored using an UV–Vis spectroscopy and the amount of clavam released in terms of amoxicillin concentration is quantitatively estimated using reverse phase high performance liquid chromatographic (RP-HPLC) technique. In vitro study reveals that the clavam released from GNPs' surface was found to show a significant enhancement in antibacterial activity against Escherichia coli and the cause of enhancement is addressed. - Graphical abstract: Stable and nearly monodisperse gold nanoparticles (GNPs) are prepared at room temperature (~ 25–30 °C) using clavam; commercial form of amoxicillin antibiotic. Tunable release of clavam from clavam stabilized GNPs is demonstrated by the addition of varying concentrations of glutathione. Interactions between clavam and gold core are investigated in detail. The mechanism of enhanced antimicrobial activity of clavam released from clavam stabilized GNPs is probed. - Highlights: • Gold nanoparticles (GNPs) are prepared without reducing agent using antibiotic clavam{sup TR}. • Our work shed lights on the nature of interaction between the clavam and GNPs. • Sustained release of clavam from clavam stabilized GNPs is demonstrated using glutathione. • Antimicrobial activity of the released clavam is confirmed using various techniques. • Our study suggests that the clavam released from GNPs shows better inhibition of E. coli.

  4. Study of locations’characteristics for stabilization of street vendors in Surakarta City

    Science.gov (United States)

    Rahayu, M. J.; Buchori, I.; Widjajanti, R.

    2018-01-01

    Street vendors are usually centered around particular areas where they have made adaptations based on their activities, instead of scattered all over the city. These locations tend to be close to street vendors’ primary activities and consumers, occupy the public lands, and are productive and accessible. The Municipality of Surakarta has managed the street vendors in the form of stabilization and relocation. In Surakarta, there are 24 areas used for stabilization of street vendors varying in characteristics and quantities. This study uses a spatial analysis aiming to explain the characteristics of locations used for stabilization of street vendors and to identify their physical condition and arrangement. Furthermore, all of the research results will be used as the criteria in choosing the new locations that are suitable for the street vendors’ characteristics and consumers’ preference. The results show that the locations are on the roadsides of the neighborhood, local, and secondary collector roads. The traffic conditions in the stabilization areas are ranging from the very busy until relatively busy level since they are close to activities for trade, education, recreation, offices, and settlements.

  5. Application of isotope-labelled compounds in the study of the chemical stability of pesticides

    International Nuclear Information System (INIS)

    Roesseler, M.; Luther, D.; Abendroth, H.C.; Koch, H.

    1980-01-01

    The user of pesticides requires specific biological modes of action from the corresponding commercial products. Impurities and degradation products may cause uncontrollable toxicological reactions. Profound knowledge of the chemical stability of the effective substance in question and its formulations under storage conditions as well as under those of analytical sample preparation and detection is required. Radioisotope labelled effective substances dimethoate and 1-butyl-amino-cyclohexane-phosphonic acid dibutyl ester are used to study storage stability of the pure effective substance and its formulations; effects of selected impurities, such as technical by-products, moisture or water content, binding or carrier materials, organic solvents, chemical stabilizers and other formulation components on storage properties; temperature dependence of storage stability; selection of suitable analytical techniques for quantitative determination of the effective substance without interference effects from any by-product; reduction of the necessary analytical expense; disclosure of sources of error in the application of usual analytical techniques; improvement of possibilities of an immediate and clearer discrimination between types and amounts of compounds in a chemical system consisting of one pesticide and its degradation or reaction products at the beginning and at the end of an experimental or reaction period. Radiochemical analytical techniques, such as radio thin-layer chromatography (also combined with liquid scintillation counting), radio gas chromatography, autoradiography and isotope dilution analysis were used. Results are discussed, especially of experiments on dimethoate and its technical by-products

  6. Stability Study of Sunscreens with Free and Encapsulated UV Filters Contained in Plastic Packaging.

    Science.gov (United States)

    Briasco, Benedetta; Capra, Priscilla; Mannucci, Barbara; Perugini, Paola

    2017-05-31

    Sunscreens play a fundamental role in skin cancer prevention and in protection against photo-aging. UV filters are often photo-unstable, especially in relation to their vehicles and, being lipophilic substances, they are able to interact with plastic packaging. Finally, UV filter stability can be significantly affected by the routine use of the product at high temperatures. This work aims to study the stability of sunscreen formulations in polyethylene packaging. Butyl methoxydibenzoylmethane and octocrylene, both in a free form and as encapsulated filters were chosen as UV filters. Stability evaluations were performed both in the packaging and on the formulations. Moreover, a further two non-destructive techniques, near-infrared (NIR) spectroscopy and a multiple light scattering technique, were also used to evaluate the stability of the formulation. Results demonstrated clearly that all of the pack underwent significant changes in its elastic/plastic behavior and in external color after solar irradiation. From the evaluation of the extractable profile of untreated and treated packaging material an absorption of 2-phenoxyethanol and octocrylene were shown. In conclusion, the results highlighted clearly that a reduction of the UV filter in the formulation packed in high-density polyethylene/low-density polyethylene (HDPE/LDPE) material can occur over time, reducing the protective effect of the product when applied to the skin.

  7. Stability Study of Sunscreens with Free and Encapsulated UV Filters Contained in Plastic Packaging

    Directory of Open Access Journals (Sweden)

    Benedetta Briasco

    2017-05-01

    Full Text Available Sunscreens play a fundamental role in skin cancer prevention and in protection against photo-aging. UV filters are often photo-unstable, especially in relation to their vehicles and, being lipophilic substances, they are able to interact with plastic packaging. Finally, UV filter stability can be significantly affected by the routine use of the product at high temperatures. This work aims to study the stability of sunscreen formulations in polyethylene packaging. Butyl methoxydibenzoylmethane and octocrylene, both in a free form and as encapsulated filters were chosen as UV filters. Stability evaluations were performed both in the packaging and on the formulations. Moreover, a further two non-destructive techniques, near-infrared (NIR spectroscopy and a multiple light scattering technique, were also used to evaluate the stability of the formulation. Results demonstrated clearly that all of the pack underwent significant changes in its elastic/plastic behavior and in external color after solar irradiation. From the evaluation of the extractable profile of untreated and treated packaging material an absorption of 2-phenoxyethanol and octocrylene were shown. In conclusion, the results highlighted clearly that a reduction of the UV filter in the formulation packed in high-density polyethylene/low-density polyethylene (HDPE/LDPE material can occur over time, reducing the protective effect of the product when applied to the skin.

  8. A Pilot Stability Study of Dehydroepiandrosterone Rapid-dissolving Tablets Prepared by Extemporaneous Compounding.

    Science.gov (United States)

    Rush, Steven D; Vernak, Charlene; Zhao, Fang

    2017-01-01

    Dehydroepiandrosterone supplementation is used to treat a variety of conditions. Rapid-dissolving tablets are a relatively novel choice for compounded dehydroepiandrosterone dosage forms. While rapid-dissolving tablets offer ease of administration, there are uncertainties about the physical and chemical stability of the drug and dosage form during preparation and over long-term storage. This study was designed to evaluate the stability of dehydroepiandrosterone rapid-dissolving tablets just after preparation and over six months of storage. The Professional Compounding Centers of America rapid-dissolving tablet mold and base formula were used to prepare 10-mg strength dehydroepiandrosterone rapid-dissolving tablets. The formulation was heated at 100°C to 110°C for 30 minutes, released from the mold, and cooled at room temperature for 30 minutes. The resulting rapid-dissolving tablets were individually packaged in amber blister packs and stored in a stability chamber maintained at 25°C and 60% relative humidity. The stability samples were pulled at pre-determined time points for evaluation, which included visual inspection, tablet weight check, United States Pharmacopeia disintegration test, and stability-indicating high-performance liquid chromatography. The freshly prepared dehydroepiandrosterone rapiddissolving tablets exhibited satisfactory chemical and physical stability. Time 0 samples disintegrated within 40 seconds in water kept at 37°C. The high-performance liquid chromatographic results confirmed that the initial potency was 101.9% of label claim and that there was no chemical degradation from the heating procedure. Over six months of storage, there were no significant changes in visual appearance, physical integrity, or disintegration time for any of the stability samples. The high-performance liquid chromatographic results also indicated that dehydroepiandrosterone rapid-dissolving tablets retained >95% label claim with no detectable degradation

  9. Network structure and thermal stability study of high temperature seal glass

    Science.gov (United States)

    Lu, K.; Mahapatra, M. K.

    2008-10-01

    High temperature seal glass has stringent requirement on glass thermal stability, which is dictated by glass network structures. In this study, a SrO-La2O3-Al2O3-B2O3-SiO2 based glass system was studied using nuclear magnetic resonance, Raman spectroscopy, and x-ray diffraction for solid oxide cell application purpose. Glass structural unit neighboring environment and local ordering were evaluated. Glass network connectivity as well as silicon and boron glass former coordination were calculated for different B2O3:SiO2 ratios. Thermal stability of the borosilicate glasses was studied after thermal treatment at 850 °C. The study shows that high B2O3 content induces BO4 and SiO4 structural unit ordering, increases glass localized inhomogeneity, decreases glass network connectivity, and causes devitrification. Glass modifiers interact with either silicon- or boron-containing structural units and form different devitrified phases at different B2O3:SiO2 ratios. B2O3-free glass shows the best thermal stability among the studied compositions, remaining stable after thermal treatment for 200 h at 850 °C.

  10. Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions.

    Science.gov (United States)

    Arjmand, N; Shirazi-Adl, A

    2006-01-01

    To resolve the trunk redundancy to determine muscle forces, spinal loads, and stability margin in isometric forward flexion tasks, combined in vivo-numerical model studies was undertaken. It was hypothesized that the passive resistance of both the ligamentous spine and the trunk musculature plays a crucial role in equilibrium and stability of the system. Fifteen healthy males performed free isometric trunk flexions of approximately 40 degrees and approximately 65 degrees +/- loads in hands while kinematics by skin markers and EMG activity of trunk muscles by surface electrodes were measured. A novel kinematics-based approach along with a nonlinear finite element model were iteratively used to calculate muscle forces and internal loads under prescribed measured postures and loads considered in vivo. Stability margin was investigated using nonlinear, linear buckling, and perturbation analyses under various postures, loads and alterations in ligamentous stiffness. Flexion postures significantly increased activity in extensor muscles when compared with standing postures while no significant change was detected in between flexed postures. Compression at the L5-S1 substantially increased from 570 and 771 N in upright posture, respectively, for +/-180 N, to 1912 and 3308 N at approximately 40 degrees flexion, and furthermore to 2332 and 3850 N at approximately 65 degrees flexion. Passive ligamentous/muscle components resisted up to 77% of the net moment. In flexion postures, the spinal stability substantially improved due both to greater passive stiffness and extensor muscle activities so that, under 180 N, no muscle stiffness was required to maintain stability. The co-activity of abdominal muscles and the muscle stiffness were of lesser concern to maintain stability in forward flexion tasks as compared with upright tasks. An injury to the passive system, on one hand, required a substantial compensatory increase in active muscle forces which further increased passive

  11. Influence of extracellular matrix coatings on implant stability and osseointegration: an animal study.

    Science.gov (United States)

    Stadlinger, Bernd; Pilling, Eckart; Huhle, Matthias; Mai, Ronald; Bierbaum, Susanne; Bernhardt, Ricardo; Scharnweber, Dieter; Kuhlisch, Eberhard; Hempel, Ute; Eckelt, Uwe

    2007-10-01

    Aim of the present study was to test the hypothesis that the application of components of the extracellular matrix such as glycosaminoglycans used as implant surface coatings in combination with collagen, with and without growth factor, can lead to enhanced ossification and thus improve implant stability compared with collagen coatings alone. Twenty miniature pigs received 120 experimental titanium implants in the mandible. Three types of surface coatings were created: (1) collagen type I (coll), (2) collagen type I/chondroitin sulphate (coll/CS), (3) collagen type I/chondroitin sulphate/BMP-4 (coll/CS/BMP). Periimplant bone formation was assessed within a defined recess along the length axis of the implant. Bone-implant contact (BIC) and bone volume density (BVD) were determined, using both histomorphometry and synchrotron radiation micro computed tomography (SRmicroCT). To measure implant stability, resonance frequency analysis was applied after implantation and 1, 3, 7, and 22 weeks after placement. BIC was highest for coll/CS coated implants, followed by coll, p = 0.082. Histomorphometric BVD did not significantly change for any coating. SRmicroCT analysis showed an increased BVD for collagen coated implants, compared with the other two surface coatings. Implant stability showed a decrease for all coatings up to the third week. At 22 weeks, all coatings showed an increase in stability without reaching their initial level. Highest stability was reached for coll coated implants, p = 0.051. It was concluded that collagen and coll/CS implant coatings have advantageous characteristics for peri-implant bone formation, compared with the further integration of BMP-4.

  12. Fixation stability of the upward gaze in patients with myasthenia gravis: an eye-tracker study.

    Science.gov (United States)

    Mihara, Miharu; Hayashi, Atsushi; Fujita, Kazuya; Kakeue, Ken; Tamura, Ryoi

    2017-01-01

    To quantify fixation stability of the upward gaze in patients with myasthenia gravis (MG) using an eye tracker. In this study, 21 normal subjects, 5 patients with MG with diplopia, 5 patients with MG without diplopia and 6 patients with superior oblique (SO) palsy were included. Subjects fixated on a target in the upward direction for 1 min. The horizontal (X) and vertical (Y) eye positions were recorded using an eye tracker. Fixation stability was first quantified using the bivariate contour ellipse areas (BCEA) of fixation points as an index of whole stability. Then, the SDs of the X and Y eye positions (SDX and SDY, respectively) were quantified as indices of directional stability, with the data divided into three 20 s fractions to detect temporal fixation fluctuation. BCEAs were larger in patients with MG (both with and without diplopia) than normal subjects and patients with SO palsy, without significant differences among the three 20 s fractions. Compared with normal subjects, SDXs were larger only in patients with MG with diplopia; SDYs were larger in both patients with MG with and without diplopia. In addition, SDYs in patients with MG with diplopia were larger than those in patients with MG without diplopia and patients with SO palsy. Furthermore, a significant difference among the three 20 s fractions was detected for SDYs in patients with MG with diplopia. Patients with MG, especially those with diplopia, exhibit fixation instability in the upward gaze. Non-invasive quantification of fixation stability with an eye tracker is useful for precisely identifying MG-specific fatigue characteristics. UMIN000023468; pre-results.

  13. A Study of Strong Stability of Distributed Systems. Ph.D. Thesis

    Science.gov (United States)

    Cataltepe, Tayfun

    1989-01-01

    The strong stability of distributed systems is studied and the problem of characterizing strongly stable semigroups of operators associated with distributed systems is addressed. Main emphasis is on contractive systems. Three different approaches to characterization of strongly stable contractive semigroups are developed. The first one is an operator theoretical approach. Using the theory of dilations, it is shown that every strongly stable contractive semigroup is related to the left shift semigroup on an L(exp 2) space. Then, a decomposition for the state space which identifies strongly stable and unstable states is introduced. Based on this decomposition, conditions for a contractive semigroup to be strongly stable are obtained. Finally, extensions of Lyapunov's equation for distributed parameter systems are investigated. Sufficient conditions for weak and strong stabilities of uniformly bounded semigroups are obtained by relaxing the equivalent norm condition on the right hand side of the Lyanupov equation. These characterizations are then applied to the problem of feedback stabilization. First, it is shown via the state space decomposition that under certain conditions a contractive system (A,B) can be strongly stabilized by the feedback -B(*). Then, application of the extensions of the Lyapunov equation results in sufficient conditions for weak, strong, and exponential stabilizations of contractive systems by the feedback -B(*). Finally, it is shown that for a contractive system, the first derivative of x with respect to time = Ax + Bu (where B is any linear bounded operator), there is a related linear quadratic regulator problem and a corresponding steady state Riccati equation which always has a bounded nonnegative solution.

  14. Methods study of homogeneity and stability test from cerium oxide CRM candidate

    International Nuclear Information System (INIS)

    Samin; Susanna TS

    2016-01-01

    The methods study of homogeneity and stability test from cerium oxide CRM candidate has been studied based on ISO 13258 and KAN DP. 01. 34. The purpose of this study was to select the test method homogeneity and stability tough on making CRM cerium oxide. Prepared 10 sub samples of cerium oxide randomly selected types of analytes which represent two compounds, namely CeO 2 and La 2 O 3 . At 10 sub sample is analyzed CeO 2 and La 2 O 3 contents in duplicate with the same analytical methods, by the same analyst, and in the same laboratory. Data analysis results calculated statistically based on ISO 13528 and KAN DP.01.34. According to ISO 13528 Cerium Oxide samples said to be homogeneous if Ss ≤ 0.3 σ and is stable if | Xr – Yr | ≤ 0.3 σ. In this study, the data of homogeneity test obtained CeO 2 is Ss = 2.073 x 10-4 smaller than 0.3 σ (0.5476) and the stability test obtained | Xr - Yr | = 0.225 and the price is < 0.3 σ. Whereas for La 2 O 3 , the price for homogeneity test obtained Ss = 1.649 x 10-4 smaller than 0.3 σ (0.4865) and test the stability of the price obtained | Xr - Yr | = 0.2185 where the price is < 0.3 σ. Compared with the method from KAN, a sample of cerium oxide has also been homogenized for Fcalc < Ftable and stable, because | Xi - Xhm | < 0.3 x n IQR. Provided that the results of the evaluation homogeneity and stability test from CeO 2 CRM candidate test data were processed using statistical methods ISO 13528 is not significantly different with statistical methods from KAN DP.01.34, which together meet the requirements of a homogeneous and stable. So the test method homogeneity and stability test based on ISO 13528 can be used to make CRM cerium oxide. (author)

  15. Stability and kinetic studies of supported ionic liquid phase catalysts for hydroformylation of propene

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Haumann, Marco

    2005-01-01

    . The activation energy was determined to be 63.3 +/- 2.1 kJ mol(-1), which is in good agreement with known results from biphasic hydroformylation. The results from the kinetic studies confirmed previously published results on the homogeneous nature of the heterogenised Rh-SILP catalyst. Long-term stability......Supported ionic liquid phase (SILP) catalysts have been studied with regard to their long-term stability in the continuous gas-phase hydroformylation of propene. Kinetic data have been acquired by variation of temperature, pressure, syngas composition, substrate concentration, and residence time...... exceeded 200 h time on stream with no loss in selectivity. A small decrease in activity could be compensated by a vacuum procedure regaining the initial activity....

  16. Study of the hydrodynamic stability of natural-circulation steam generators

    International Nuclear Information System (INIS)

    Olive, J.

    1981-01-01

    This report presents a mathematical model of a study of the stability of natural-circulation steam generators. The method used consists in linearizing the equations for the single-dimensional flow and integrating them by using Laplace's transformation. The properties of the two-phase fluids are described by a homegeneous model with slip. The results of the calculation are the transfer functions of the circulation loop and its own oscillation modes (period and damping). Comparison of the results obtained by this method with those from other existing methods in the case of a straight tube with forced flow have proved satisfactory. Lastly, the results of a parametric study on the stability of a natural-circulation steam generator for a PWR unit are presented. The results show that the model is capable of reproducing at least qualitatively the trends observed experimentally or obtained by other more complex theoretical models [fr

  17. Chemical stability and surface stoichiometry of vanadium oxide phases studied by reactive molecular dynamics simulations

    Science.gov (United States)

    Jeon, Byoungseon; Ko, Changhyun; van Duin, Adri C. T.; Ramanathan, Shriram

    2012-02-01

    Compositional stability of various vanadium oxides and oxide growth on vanadium surfaces have been studied using reactive molecular dynamics simulation methods. Vanadium dioxide (VO2), sesquioxide (V2O3), pentoxide (V2O5), and hexavanadium tridecaoxide (V6O13) are studied in bulk crystalline and thin film structures, investigating charge distribution and pair distribution functions of particle interactions. The stability is estimated to be pentoxide, hexavanadium tridecaoxide, sesquioxide, and dioxide respectively in decreasing order in thin film structures. We then analyze oxide growth kinetics on vanadium (100) and (110) surfaces. The oxidation rate, stoichiometry, charge distribution, and the effect of surface orientation on kinetic phenomena are noted. In the early stages of surface oxidation of our simulation configurations, sesquioxide is found to be the dominant component. The modeling and simulation results are compared with experiments where available.

  18. Lyapunov indices and the Poincare mapping in a study of the stability of the krebs cycle

    International Nuclear Information System (INIS)

    Gryrtsay, V.I.

    2015-01-01

    On the basis of a mathematical model, we continue the study of the metabolic Krebs cycle (or the tricarboxylic acid cycle). For the first time, we consider its consistency and stability, which depend on the dissipation of a transmembrane potential formed by the respiratory chain in the plasmatic membrane of a cell. The phase-parametric characteristic of the dynamics of the ATP level depending on a given parameter is constructed. The scenario of formation of multiple autoperiodic and chaotic modes is presented. Poincare sections and mappings are constructed. The stability of modes and the fractality of the obtained bifurcations are studied. The full spectra of Lyapunov indices, divergences, KS-entropies, horizons of predictability, and Lyapunov dimensionalities of strange attractors are calculated. Some conclusions about the structural-functional connections determining the dependence of the cell respiration cyclicity on the synchronization of the functioning of the tricarboxylic acid cycle and the electron transport chain are presented

  19. Activity and stability studies of platinized multi-walled carbon nanotubes as fuel cell electrocatalysts

    DEFF Research Database (Denmark)

    Stamatin, Serban Nicolae; Borghei, Maryam; Dhiman, Rajnish

    2015-01-01

    A non-covalent functionalization for multi-walled carbon nanotubes has been used as an alternative to the damaging acid treatment. Platinum nanoparticles with similar particle size distribution have been deposited on the surface modified multi-walled carbon nanotubes. The interaction between...... platinum nanoparticles and multi-walled carbon nanotubes functionalized with 1-pyrenecarboxylic acid is studied and its electrochemical stability investigated. This study reveals the existence of a platinum-support interaction and leads to three main conclusions. First, the addition of 1-pyrenecarboxylic...... acid is improving the dispersion of platinum nanoparticles, leading to an improved electrochemical activity towards oxygen reduction reaction. Second, the investigations regarding the electrochemical stability showed that the platinum-support interaction plays an important role in improving the long...

  20. Physical and chemical characterization of active pharmaceutical ingredients in the framework of preformulation and stability studies

    OpenAIRE

    Gana , Inès

    2015-01-01

    The development of a drug for a given therapeutic target requires several steps, which can be summarized by drug screening, a preclinical phase and a number of clinical phases. These steps allow the selection of an active substance and a verification of its therapeutic efficacy and toxicological safety. The latter two criteria define the quality of the drug, which once demonstrated, must be guaranteed throughout its shelf life. Quality is assessed through stability studies that are carried ou...

  1. Immediate semi-static loading using compression healing abutments: a stability study in dogs.

    Science.gov (United States)

    Cano, Jorge; Campo, Julián; Colmenero, César; Rodríguez-Vázquez, José Francisco

    2012-08-01

    Loading in implant dentistry to accelerate prosthodontic treatment has been receiving increasing interest. The aim of this study was to investigate the effect of an early controlled lateral loading (after 7 days) on the establishment of osseointegration by means of resonance frequency analysis. Two groups of six beagle dogs each were used. Group I had implants without loading. Group II had implants loaded with a new prototype compression abutment that created controlled semi-static loading. Loaded implants showed slightly better stability after 5 weeks of healing, but the difference was not significant. We concluded that controlled loading is beneficial to maintain, and even improve, stability during the early critical healing period. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. A Study On Dispersion Stability Of Nickel Nanoparticles Synthesized By Wire Explosion In Liquid Media

    Directory of Open Access Journals (Sweden)

    Kim C.K.

    2015-06-01

    Full Text Available In this study, nickel nanoparticles were synthesized in ethanol using portable pulsed wire evaporation, which is a one-step physical method. From transmission electron microscopy images, it was found that the Ni nanoparticles exhibited a spherical shape with an average diameter of 7.3 nm. To prevent aggregation of the nickel nanoparticles, a polymer surfactant was added into the ethanol before the synthesis of nickel nanoparticles, and adsorbed on the freshly synthesized nickel nanoparticles during the wire explosion. The dispersion stability of the prepared nickel nanofluids was investigated by zeta-potential analyzer and Turbiscan optical analyzer. As a result, the optimum concentration of polymer surfactant to be added was suggested for the maximized dispersion stability of the nickel nanofluids.

  3. Study of the relationships between nuclear decontamination foams stability and their physicochemical properties

    International Nuclear Information System (INIS)

    Dame, C.

    2006-03-01

    The LPAD (French Atomic Energy Commission) develops innovative processes in the frame of the future dismantling of nuclear facilities. Formulations were developed using high viscosified foams stabilized by biodegradable nonionic surfactants: alkyl poly-glucosides and viscosifiers (xanthan gum), which allow us to increase the foam lifetime and thus contact time of chemical reactants with the facility walls. We have considered the relationships between physicochemical properties and foam stability through the exploration of the foam at three different scales: from the molecular range (micelles, surface tension and visco-elasticity), to the film and Plateau border range (XR reflectivity, surface shear viscosity) and to macroscopic range, meaning the whole foam (foaminess, liquid fraction and wall film thickness evolution). Finally, exploratory study is presented concerning simultaneous foam three scales characterisation by small angle neutron scattering. (author)

  4. An experimental and numerical study of the atmospheric stability impact on wind turbine wakes

    DEFF Research Database (Denmark)

    Machefaux, Ewan; Larsen, Gunner Chr.; Koblitz, Tilman

    2016-01-01

    In this paper, the impact of atmospheric stability on a wind turbine wake is studied experimentally and numerically. The experimental approach is based on full-scale (nacelle based) pulsed lidar measurements of the wake flow field of a stall-regulated 500 kW turbine at the DTU Wind Energy, Risø...... campus test site. Wake measurements are averaged within a mean wind speed bin of 1 m s1 and classified according to atmospheric stability using three different metrics: the Obukhov length, the Bulk–Richardson number and the Froude number. Three test cases are subsequently defined covering various...... atmospheric conditions. Simulations are carried out using large eddy simulation and actuator disk rotor modeling. The turbulence properties of the incoming wind are adapted to the thermal stratification using a newly developed spectral tensor model that includes buoyancy effects. Discrepancies are discussed...

  5. Timetable stability study on behalf of Swiss Federal Railways; Ziel Puenktlichkeit: Fahrplanstabilitaetsuntersuchung fuer die SBB

    Energy Technology Data Exchange (ETDEWEB)

    Akermann, Hans-Rudolf [SMA und Partner AG, Zuerich (Switzerland); Bueker, Thorsten [RWTH Aachen (Germany). Verkehrswissenschaftliches Inst.

    2008-11-15

    The 2008 annual timetable created new challenges for the Swiss Federal Railways on account of the further intensification of services and the conscious acceptance of stability risks with the entry into service of the Loetschberg Base Tunnel and the upgrading of Interlaken-West to a primary node. To be prepared, the timetable was verified beforehand using stochastic computation techniques at the macroscopic level to examine stability, punctuality and effective achievement of connections. The study succeeded in producing a model of the passenger network that was close to reality, and plausible answers were also provided for the questions asked. Applying this technique to one of the world's densest networks also produced valuable findings that can now be used as meaningful inputs for the further development of the algorithms. (orig.)

  6. Immediatevsnon-immediate loading post-extractive implants: a comparative study of implant stability quotient (ISQ).

    Science.gov (United States)

    Milillo, L; Fiandaca, C; Giannoulis, F; Ottria, L; Lucchese, A; Silvestre, F; Petruzzi, M

    2016-01-01

    This study aims to evaluate differences in implant stability between post-extractive implants vs immediately placed post-extractive implants by resonance frequency analysis (RFA). Patients were grouped into two different categories. In Group A 10 patients had an immediate post-extractive implant, then a provisional, acrylic resin crown was placed (immediate loading). In Group B (control group) 10 patients only had an immediate post-extractive implant. Both upper and lower premolars were chosen as post-extractive sites. Implant Stability Quotient (ISQ) was measured thanks to RFA measurements (Osstell®). Five intervals were considered: immediately after surgery (T0) and every four weeks, until five months after implant placement (T1, T2, T3, T4,T5). A statistical analysis by means of Student's T-test (significance set at pimmediate prosthetic surgery in post-extraction sites with cone-shaped implants, platform-switching abutment and bioactive surface can facilitate osseointegration, reducing healing time.

  7. SERS studies on the interaction between UO22+ and PVP-stabilized silver nanoparticles

    International Nuclear Information System (INIS)

    Roy, M.; Tyagi, A.K.; Kumar, Rakesh; Pandey, A.K.; Goswami, A.

    2010-01-01

    Interaction between uranyl (UO 2 2+ ) ions and silver nanoparticles (Ag-nps) stabilized by suitable polymeric capping agents has been studied in aqueous phase using surface enhanced resonance Raman spectroscopy technique (SERS). Polyvinylpyrrolidone (PVP) stabilized Ag-nps were synthesized by dissolving in water appropriate amount of PVP and AgNO 3 along with a suitable reducing agent in the form of either formamide or sodium borohydride. The solution was vigorously stirred for 5h and finally nanoparticle sols were obtained. A series of analyte samples was prepared by adding an appropriate amount of silver sol to different volumes of uranyl stock solution prepared at pH=3. The solutions were then drop cast on glass slides and dried in air. Preliminary results on drop-cast samples are presented here

  8. A study on the operational stability of a refrigeration system having a variable speed compressor

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yiming; Deng, Shiming; Xu, Xiangguo; Chan, Mingyin [Department of Building Services Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong SAR (China)

    2008-12-15

    The increased use of variable speed compressors (VSC) in refrigeration systems can potentially lead to the unstable operation when compressor speed is varied from time to time for capacity control. The causes of unstable operation may be classified into two groups, one relating to control algorithms and the other to the inherent characteristics of systems. This paper reports on a study on the operational stability of a VSC refrigeration system due to its inherent characteristics. Based on experimental results, a new modified minimal stable superheat (MSS) line having a maximum MSS value and a minimal MSS value has been proposed. Using the modified MSS line, and supported by a series of purposely designed experiments, a detailed analysis on the operational stability of a VSC refrigeration system due to its inherent characteristics when its compressor speed is changed for capacity control has been carried out and presented. (author)

  9. Formulation design of oral pediatric Acetazolamide suspension: dose uniformity and physico-chemical stability study.

    Science.gov (United States)

    Santoveña, Ana; Suárez-González, Javier; Martín-Rodríguez, Cristina; Fariña, José B

    2017-03-01

    The formulation of an active pharmaceutical ingredient (API) as oral solution or suspension in pediatrics is a habitual practice, due to the non-existence of many commercialized medicines in pediatric doses. It is also the simplest way to prepare and administer them to this vulnerable population. The design of a formulation that assures the dose and the system stability depends on the physico-chemical properties of the API. In this study, we formulate a class IV API, Acetazolamide (AZM) as suspension for oral administration to pediatric population. The suspension must comply attributes of quality, safety and efficacy for this route of administration. We use simple compounding procedures, as well as fewer pure excipients, as recommended for children. Mass and uniformity content assays and physical and chemical stability studies were performed. To quantify the API an UPLC method was used. We verified the physico-chemical stability of the suspensions and that they passed the mass test of the European Pharmacopeia (EP), but not the dose uniformity test. This reveals that AZM must be formulated as liquid forms with a more complex system of excipients (not usually indicated in pediatrics), or otherwise solid forms capable of assuring uniformity of mass and dose for every dosage unit.

  10. Study of the stability of organic ligands usable for the spent nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Draye, Micheline

    1994-01-01

    The first part of this research thesis on the stability of organic ligands in radioactive environment, reports the study of the stability of the dicyclohexano-18-crown-6 (DCH18C6) in radioactive environment by using several analytical techniques (nuclear magnetic resonance or NMR, X-ray diffraction, Fourier transform infrared spectroscopy or FTIR, gas chromatography or GC, and coupled gas chromatography/mass spectroscopy). The seven main radiolysis products of DCH18C6 are identified and then synthesised to be tested in radioactive environment. These products are soluble in nitric medium, and partially precipitate plutonium, but cannot in any case disturb the reprocessing process based on a continuous extraction system. Chemical yields are computed and DCH18C6 appears to be a serious candidate for the reprocessing of spent nuclear fuels. The second part reports the study of the stability of the poly(4-vinylpyridine) or P4VP in radioactive environment. It appears that gamma radiations produce radicals in the P4VP which recombine in function of the irradiation dose. However, this material is very stable in acid environment and radioactive environment [fr

  11. Comparative study of different techniques of composting and their stability evaluation in municipal solid waste

    International Nuclear Information System (INIS)

    Iqbal, M.K.; Khan, R.A.; Nadeem, A.; Hussnain, A.

    2012-01-01

    Spatial differences in the physical and chemical characteristics related to maturity of composted organic matter are strongly influenced by composting methods. For evaluation of compost maturity three locally fabricated composters (aerobic, mixed type, anaerobic) processes were examined at seven days interval up to 91 days by loading MSW along with bulking agent. Gradual changes in physico chemical characteristics (temperature, pH, moisture, CEC, humification) related to stability and maturity of compost were studied and compared. Increase in ammonia nitrogen level due to rise in temperature was maximum in aerobic process. Substantial increase in CEC in aerobic process was earlier which leads to establish the optimal degree of maturity as compared to other processes. FA and HI decrease rapidly as composting progressed. Optimal level in stability and maturity parameters like C:N, HA, DH and HR were attained earlier in aerobic process as compared to mixed type and anaerobic processes due to continuous aeration. The parameters (HR, DH, FA, HA), which indicate the compost stability were correlated among themselves. The parameters defining maturity such as CEC, ammonia nitrate and C:N ratio were also related to above mention parameters. The compost from the aerobic process provided good humus and micro nutrients. Result from this study will assist in method optimization and quality of the compost product. (author)

  12. Tangential Bicortical Locked Fixation Improves Stability in Vancouver B1 Periprosthetic Femur Fractures: A Biomechanical Study.

    Science.gov (United States)

    Lewis, Gregory S; Caroom, Cyrus T; Wee, Hwabok; Jurgensmeier, Darin; Rothermel, Shane D; Bramer, Michelle A; Reid, John Spence

    2015-10-01

    The biomechanical difficulty in fixation of a Vancouver B1 periprosthetic fracture is purchase of the proximal femoral segment in the presence of the hip stem. Several newer technologies provide the ability to place bicortical locking screws tangential to the hip stem with much longer lengths of screw purchase compared with unicortical screws. This biomechanical study compares the stability of 2 of these newer constructs to previous methods. Thirty composite synthetic femurs were prepared with cemented hip stems. The distal femur segment was osteotomized, and plates were fixed proximally with either (1) cerclage cables, (2) locked unicortical screws, (3) a composite of locked screws and cables, or tangentially directed bicortical locking screws using either (4) a stainless steel locking compression plate system with a Locking Attachment Plate (Synthes) or (5) a titanium alloy Non-Contact Bridging system (Zimmer). Specimens were tested to failure in either axial or torsional quasistatic loading modes (n = 3) after 20 moderate load preconditioning cycles. Stiffness, maximum force, and failure mechanism were determined. Bicortical constructs resisted higher (by an average of at least 27%) maximum forces than the other 3 constructs in torsional loading (P steel construct in axial loading. Proximal fixation stability is likely improved with the use of bicortical locking screws as compared with traditional unicortical screws and cable techniques. In this study with a limited sample size, we found the addition of cerclage cables to unicortical screws may not offer much improvement in biomechanical stability of unstable B1 fractures.

  13. Synthesis, Antibacterial and Thermal Studies of Cellulose Nanocrystal Stabilized ZnO-Ag Heterostructure Nanoparticles

    Directory of Open Access Journals (Sweden)

    Mohd Zobir Hussein

    2013-05-01

    Full Text Available Synthesis of ZnO-Ag heterostructure nanoparticles was carried out by a precipitation method with cellulose nanocrystals (CNCs as a stabilizer for antimicrobial and thermal studies. ZnO-Ag nanoparticles were obtained from various weight percentages of added AgNO3 relative to Zn precursors for evaluating the best composition with enhanced functional properties. The ZnO-Ag/CNCs samples were characterized systematically by TEM, XRD, UV, TGA and DTG. From the TEM studies we observed that ZnO-Ag heterostructure nanoparticles have spherical shapes with size diameters in a 9–35 nm range. The antibacterial activities of samples were assessed against the bacterial species Salmonella choleraesuis and Staphylococcus aureus. The CNC-stabilized ZnO-Ag exhibited greater bactericidal activity compared to cellulose-free ZnO-Ag heterostructure nanoparticles of the same particle size. The incorporation of ZnO-Ag hetreostructure nanoparticles significantly increased the thermal stability of cellulose nanocrystals.

  14. A comparative study of stabilizing control of a planer electromagnetic levitation using PID and LQR controllers

    Directory of Open Access Journals (Sweden)

    Mundher H.A. Yaseen

    Full Text Available Magnetic levitation is a technique to suspend an object without any mechanical support. The main objective of this study is to demonstrate stabilized closed loop control of 1-DOF Maglev experimentally using real-time control simulink feature of (SIMLAB microcontroller. Proportional Integral Derivative (PID and Linear Quadratic Regulator (LQR controllers are employed to examine the stability performance of the Maglev control system under effect of unbalanced change of load and wave signal on Maglev plane. The effect of unbalanced change of applied load on single point, line and plane are presented. Furthermore, in order to study the effect of sudden change in input signal, the input of wave signal has been applied on all points of the prototype maglev plate simultaneously. The results of pulse width modulation (PWM reveal that the control system using LQR controller provides faster response to adjust the levitated plane comparing to PID controller. Moreover, the air gap distance that controlled using PID controller is rather stable with little oscillation. Meanwhile, LQR controller provided more stability and homogeneous response. Keywords: Magnetic levitation (Maglev, Linear Quadratic Regulator (LQR, PID controller, SIMLAB Platform

  15. Studies of neutron-rich nuclei far from stability at TRISTAN

    International Nuclear Information System (INIS)

    Gill, R.L.

    1984-01-01

    The ISOL facility, TRISTAN, is a user facility located at Brookhaven National Laboratory's High Flux Beam Reactor. Short-lived, neutron-rich nuclei, far from stability, are produced by thermal neutron fission of 235 U. An extensive array of experimental end stations are available for nuclear structure studies. These studies are augmented by a variety of long-lived ion sources suitable for use at a reactor facility. Some recent results at TRISTAN are presented as examples of using an ISOL facility to study series of nuclei, whereby an effective means of conducting nuclear structure investigations is available

  16. Contribution of the Pubofemoral Ligament to Hip Stability: A Biomechanical Study.

    Science.gov (United States)

    Martin, Hal D; Khoury, Anthony N; Schröder, Ricardo; Johnson, Eric; Gómez-Hoyos, Juan; Campos, Salvador; Palmer, Ian J

    2017-02-01

    To determine the isolated function of the pubofemoral ligament of the hip capsule and its contribution to hip stability in external/internal rotational motion during flexion greater than 30° and abduction. Thirteen hips from 7 fresh-frozen pelvis-to-toe cadavers were skeletonized from the lumbar spine to the distal femur with the capsular ligaments intact. Computed tomographic imaging was performed to ensure no occult pathological state existed, and assess bony anatomy. Specimens were placed on a surgical table in supine position with lower extremities resting on a custom-designed polyvinylchloride frame. Hip internal and external rotation was measured with the hip placed into a combination of the following motions: 30°, 60°, 110° hip flexion and 0°, 20°, 40° abduction. Testing positions were randomized. The pubofemoral ligament was released and measurements were repeated, followed by releasing the ligamentum teres. Analysis of the 2,106 measurements recorded demonstrates the pubofemoral ligament as a main controller of hip internal rotation during hip flexion beyond 30° and abduction. Hip internal rotation was increased up to 438.9% (P ligament was released and 412.9% (P ligament were released, compared with the native state. The hypothesis of the pubofemoral ligament as one of the contributing factors of anterior inferior hip stability by controlling external rotation of the hip in flexion beyond 30° and abduction was disproved. The pubofemoral ligament maintains a key function in limiting internal rotation in the position of increasing hip flexion beyond 30° and abduction. This cadaveric study concludes previous attempts at understanding the anatomical and biomechanical function of the capsular ligaments and their role in hip stability. The present study contributes to the understanding of hip stability and biomechanical function of the pubofemoral ligament. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All

  17. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies.

    Science.gov (United States)

    Schou-Pedersen, Anne Marie V; Østergaard, Jesper; Cornett, Claus; Hansen, Steen Honoré

    2015-05-15

    Microwave ovens have been used extensively in organic synthesis in order to accelerate reaction rates. Here, a set up comprising a microwave oven combined with silicon carbide (SiC) plates for the controlled microwave heating of model formulations has been applied in order to investigate, if a microwave oven is applicable for accelerated drug stability testing. Chemical interactions were investigated in three selected model formulations of drug and excipients regarding the formation of ester and amide reaction products. In the accelerated stability studies, a design of experiments (DoE) approach was applied in order to be able to rank excipients regarding reactivity: Study A: cetirizine with PEG 400, sorbitol, glycerol and propylene glycol. Study B: 6-aminocaproic acid with citrate, acetate, tartrate and gluconate. Study C: atenolol with citric, tartaric, malic, glutaric, and sorbic acid. The model formulations were representative for oral solutions (co-solvents), parenteral solutions (buffer species) and solid dosage forms (organic acids applicable for solubility enhancement). The DoE studies showed overall that the same impurities were generated by microwave oven heating leading to temperatures between 150°C and 180°C as compared to accelerated stability studies performed at 40°C and 80°C using a conventional oven. Ranking of the reactivity of the excipients could be made in the DoE studies performed at 150-180°C, which was representative for the ranking obtained after storage at 40°C and 80°C. It was possible to reduce the time needed for drug-excipient compatibility testing of the three model formulations from weeks to less than an hour in the three case studies. The microwave oven is therefore considered to be an interesting alternative to conventional thermal techniques for the investigation of drug-excipient interactions during preformulation. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Stability, protein binding and clearance studies of [99mTc]DTPA. Evaluation of a commercially available dry-kit

    DEFF Research Database (Denmark)

    Rehling, M

    1988-01-01

    the quality of a commercial [99mTc]DTPA preparation (C.I.S., France) with reference to stability, protein binding and accuracy of the determined plasma clearance values as a measure of GFR. The stability of the preparations was studied by thin-layer chromatography, the in vitro protein binding by Sephadex...

  19. Genetic Moderation of Stability in Attachment Security from Early Childhood to Age 18 Years: A Replication Study

    Science.gov (United States)

    Raby, K. Lee; Roisman, Glenn I.; Booth-LaForce, Cathryn

    2015-01-01

    A longstanding question for attachment theory and research is whether genetically based characteristics of the child influence the development of attachment security and its stability over time. This study attempted to replicate and extend recent findings indicating that the developmental stability of attachment security is moderated by oxytocin…

  20. Torsional stability of interference screws derived from bovine bone - a biomechanical study

    Directory of Open Access Journals (Sweden)

    Schmitt Jan

    2010-05-01

    Full Text Available Abstract Background In the present biomechanical study, the torsional stability of different interference screws, made of bovine bone, was tested. Interference screws derived from bovine bone are a possible biological alternative to conventional metallic or bioabsorbable polymer interference screws. Methods In the first part of the study we compared the torsional stability of self-made 8 mm Interference screws (BC and a commercial 8 mm interference screw (Tutofix®. Furthermore, we compared the torsional strength of BC screws with different diameters. For screwing in, a hexagon head and an octagon head were tested. Maximum breaking torques in polymethyl methacrylate resin were recorded by means of an electronic torque screw driver. In the second part of the study the tibial part of a bone-patellar tendon-bone graft was fixed in porcine test specimens using an 8 mm BC screw and the maximum insertion torques were recorded. Each interference screw type was tested 5 times. Results There was no statistically significant difference between the different 8 mm interference screws (p = 0.121. Pairwise comparisons did not reveal statistically significant differences, either. It was demonstrated for the BC screws, that a larger screw diameter significantly leads to higher torsional stability (p = 9.779 × 10-5. Pairwise comparisons showed a significantly lower torsional stability for the 7 mm BC screw than for the 8 mm BC screw (p = 0.0079 and the 9 mm BC screw (p = 0.0079. Statistically significant differences between the 8 mm and the 9 mm BC screw could not be found (p = 0.15. During screwing into the tibial graft channel of the porcine specimens, insertion torques between 0.5 Nm and 3.2 Nm were recorded. In one case the hexagon head of a BC screw broke off during the last turn. Conclusions The BC screws show comparable torsional stability to Tutofix® interference screws. As expected the torsional strength of the screws increases significantly with the

  1. Torsional stability of interference screws derived from bovine bone - a biomechanical study

    Science.gov (United States)

    2010-01-01

    Background In the present biomechanical study, the torsional stability of different interference screws, made of bovine bone, was tested. Interference screws derived from bovine bone are a possible biological alternative to conventional metallic or bioabsorbable polymer interference screws. Methods In the first part of the study we compared the torsional stability of self-made 8 mm Interference screws (BC) and a commercial 8 mm interference screw (Tutofix®). Furthermore, we compared the torsional strength of BC screws with different diameters. For screwing in, a hexagon head and an octagon head were tested. Maximum breaking torques in polymethyl methacrylate resin were recorded by means of an electronic torque screw driver. In the second part of the study the tibial part of a bone-patellar tendon-bone graft was fixed in porcine test specimens using an 8 mm BC screw and the maximum insertion torques were recorded. Each interference screw type was tested 5 times. Results There was no statistically significant difference between the different 8 mm interference screws (p = 0.121). Pairwise comparisons did not reveal statistically significant differences, either. It was demonstrated for the BC screws, that a larger screw diameter significantly leads to higher torsional stability (p = 9.779 × 10-5). Pairwise comparisons showed a significantly lower torsional stability for the 7 mm BC screw than for the 8 mm BC screw (p = 0.0079) and the 9 mm BC screw (p = 0.0079). Statistically significant differences between the 8 mm and the 9 mm BC screw could not be found (p = 0.15). During screwing into the tibial graft channel of the porcine specimens, insertion torques between 0.5 Nm and 3.2 Nm were recorded. In one case the hexagon head of a BC screw broke off during the last turn. Conclusions The BC screws show comparable torsional stability to Tutofix® interference screws. As expected the torsional strength of the screws increases significantly with the diameter. The safety

  2. Research of quality values and stability study of vaginal suppositories containing fluconazole and chlorhexidine digluconate

    Directory of Open Access Journals (Sweden)

    Катерина Олександрівна Бур’ян

    2015-10-01

    Full Text Available Aim of research. Stability is one of the main quality values of remedies. Biopharmaceutical properties of drugs and efficiency of pharmacodynamic and pharmacokinetic processes of active compounds in human’s organism completely depend on physico-chemical values permanence and microbiological stability of every unit of drug. The aim of research resulting in the article was to determine the main quality values stability and microbiological purity of vaginal suppositories containing fluconazole and chlorhexidine digluconate after storage under certain conditions.Materials and methods. During both storage under room temperature and keeping in cool place vaginal suppositories prepared upon hydrophilic basis were periodically verified on indicators of description, identification, average weight and homogeneity of weight, dissolution, microbiological purity and active ingredients assay in unit dose. All research tests were carried out in accordance with both the SPhU requirements and elaborated draft of quality control procedures for «Flugedyn» remedy.Results. As a result of quality values study of suppositories test samples the efficiency and reliability of developed techniques and normative documentation draft of remedy were confirmed. Samples have been kept for as long as 5 years don’t comply with the requirements of normative documentation of remedy.Conclusion. Thus, summation of research data allow recommend following optimal storage period for vaginal suppositories «Flugedyn»: keep 3 years in dry place at a temperature 2 to 25 оС

  3. Nonlinear stability and control study of highly maneuverable high performance aircraft

    Science.gov (United States)

    Mohler, R. R.

    1993-01-01

    This project is intended to research and develop new nonlinear methodologies for the control and stability analysis of high-performance, high angle-of-attack aircraft such as HARV (F18). Past research (reported in our Phase 1, 2, and 3 progress reports) is summarized and more details of final Phase 3 research is provided. While research emphasis is on nonlinear control, other tasks such as associated model development, system identification, stability analysis, and simulation are performed in some detail as well. An overview of various models that were investigated for different purposes such as an approximate model reference for control adaptation, as well as another model for accurate rigid-body longitudinal motion is provided. Only a very cursory analysis was made relative to type 8 (flexible body dynamics). Standard nonlinear longitudinal airframe dynamics (type 7) with the available modified F18 stability derivatives, thrust vectoring, actuator dynamics, and control constraints are utilized for simulated flight evaluation of derived controller performance in all cases studied.

  4. Preparation, homogeneity and stability studies of a candidate LRM for Se speciation

    Energy Technology Data Exchange (ETDEWEB)

    Bodo, Erzsebet Tuende; Stefanka, Zsolt; Ipolyi, Ildiko; Soeroes, Csilla; Dernovics, Mihaly; Fodor, Peter [Department of Applied Chemistry, Faculty of Food Science, Szent Istvan University, Villanyi ut 29-33, 1118, Budapest (Hungary)

    2003-09-01

    A laboratory reference material (LRM) was prepared from Brazil nuts (Bertholletia excelsa) for quality control (QC) purposes of selenium speciation. The preparation of this LRM led through the usual operation steps applied during routine reference material production from biota samples - preparation of the raw material, homogenisation, storage design, checking of homogeneity, microbiological status and possible irradiation effects, and monitoring the species stability vs time at different storage temperatures. The selenium speciation studies to check species stability were carried out on a HPLC-UV-HG-AFS measurement set-up. Special attention was paid to the correct identification of selenium species by applying independent HPLC separation techniques (ion-pairing and anion-exchange chromatography). The concentration of selenomethionine (SeMet) and total Se content were quantified (79.9 {mu}g g{sup -1} (calculated as Se) and 82.9 {mu}g g{sup -1}, respectively). The homogeneity and stability of this candidate reference material passed the relevant tests recommended by Bureau Communautaire de Reference (BCR). (orig.)

  5. Micromagnetic study of skyrmion stability in confined magnetic structures with perpendicular anisotropy

    Science.gov (United States)

    Novak, R. L.; Garcia, F.; Novais, E. R. P.; Sinnecker, J. P.; Guimarães, A. P.

    2018-04-01

    Skyrmions are emerging topological spin structures that are potentially revolutionary for future data storage and spintronics applications. The existence and stability of skyrmions in magnetic materials is usually associated to the presence of the Dzyaloshinskii-Moriya interaction (DMI) in bulk magnets or in magnetic thin films lacking inversion symmetry. While some methods have already been proposed to generate isolated skyrmions in thin films with DMI, a thorough study of the conditions under which the skyrmions will remain stable in order to be manipulated in an integrated spintronic device are still an open problem. The stability of such structures is believed to be a result of ideal combinations of perpendicular magnetic anisotropy (PMA), DMI and the interplay between geometry and magnetostatics. In the present work we show some micromagnetic results supporting previous experimental observations of magnetic skyrmions in spin-valve stacks with a wide range of DMI values. Using micromagnetic simulations of cobalt-based disks, we obtain the magnetic ground state configuration for several values of PMA, DMI and geometric parameters. Skyrmion numbers, corresponding to the topological charge, are calculated in all cases and confirm the occurrence of isolated, stable, axially symmetric skyrmions for several combinations of DMI and anisotropy constant. The stability of the skyrmions in disks is then investigated under magnetic field and spin-polarized current, in finite temperature, highlighting the limits of applicability of these spin textures in spintronic devices.

  6. Spectral, morphological and antibacterial studies of β-cyclodextrin stabilized silver - Chitosan nanocomposites

    Science.gov (United States)

    Punitha, N.; Ramesh, P. S.; Geetha, D.

    2015-02-01

    The aim of the study is to investigate the antibacterial properties and characterization of β-cyclodextrin (β-CD) stabilized silver - chitosan nanocomposite (Ag-Cts NCs). An effective and eco-friendly technique for the synthesis of Ag-Cts NCs in the presence of a strong stabilizing agent β-CD is described. The well formed nanocomposites were characterized by the Ultraviolet Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Photoluminescence spectroscopy (PL), Scanning electron microscope (SEM/EDS), Atomic force microscope (AFM), High resolution transmission electron microscope (HR-TEM) and Zeta potential measurement (ZP). The results confirmed that the poly dispersed Ag-Cts NCs are less than 15 nm in size with spherical shape and show good stability. The antibacterial activity was also investigated and β-CD coated Ag-Cts NCs showed a promising bacterial activity against gram negative Escherichia coli (E. coli) and gram positive Staphylococcus aureus (S. aureus) micro-organism.

  7. A THEORETICAL AND NUMERICAL STUDY OF THERMOSOLUTAL CONVECTION: STABILITY OF A SALINITY GRADIENT SOLAR POND

    Directory of Open Access Journals (Sweden)

    Djamel Kalache

    2011-01-01

    Full Text Available A theoretical and numerical study of the effect of thermodiffusion on the stability of a gradient layer is presented. It intends to clarify the mechanisms of fluid dynamics and the processes which occur in a salinity gradient solar pond. A mathematical modelling is developed to describe the thermodiffusion contribution on the solar pond where thermal, radiative, and massive fluxes are coupled in the double diffusion. More realistic boundary conditions for temperature and concentration profiles are used. Our results are compared with those obtained experimentally by authors without extracting the heat flux from the storage zone. We have considered the stability analysis of the equilibrium solution. We assumed that the perturbation of quantities such as velocity, temperature, and concentration are infinitesimal. Linearized equations satisfying appropriate prescribed boundary conditions are then obtained and expanded into polynomials form. The Galerkin method along with a symbolic algebra code (Maple are used to solve these equations. The effect of the separation coefficient y is analyzed in the positive and negative case. We have also numerically compared the critical Rayleigh numbers for the onset of convection with those obtained by the linear stability analysis for Le = 100, µa = 0.8, and f = 0.5.

  8. The Study on Stability and Seakeeping Characteristics of the Glass Bottom Boat Trimaran in Karimunjawa Island

    Science.gov (United States)

    Arswendo Adietya, Berlian; Windyandari, Aulia; Fauzan Zakki, Ahmad

    2018-03-01

    Recently the diversity of fish populations in the waters Karimunjawa Island is only appreciated by those who have the ability to play diving and snorkeling. It is due to the unavailability of a vehicle that is specially made to delight in the fascination of the underwater panorama. One of the alternative solutions is using the glass bottom boat technology which is using transparent bottom that might look out the underwater scenery instead of swimming and snorkeling. The paper has focused on the study of intact stability and seakeeping characteristics of glass bottom boat trimaran in Karimunjawa Island. The intact stability characteristics will be investigated at the various load cases and weight distribution configurations which are influenced by the passenger positions and fuel tank condition. Regarding the seakeeping performance analysis, the ITTC-Bretschneider will be adopted as the wave spectrum at the wave parameters defined from the operational environment. The influence of the parameters on the stability and seakeeping of the glass bottom boat trimaran are presented and discussed.

  9. Study on thermal stability and chemical structure of polyamide blended with small amount of Cu

    International Nuclear Information System (INIS)

    Arai, Tsuyoshi; Ueno, Tomonaga; Kajiya, Takafumi; Ishikawa, Tomoyuki; Takeda, Kunihiko

    2007-01-01

    The thermal stability and the chemical structure of Polyamide 66 (PA66) blended with a small amount of copper have been studied. The thermal degradation of the blend with 35 ppm or more of copper was restrained and no strong influence of the concentration of copper was observed. The molecular weight of PA66 decreased by the thermal aging process but the amount of decrease of the blend was smaller than that of the non-blend. The water uptake of the blend increased. The chemical structure, which was observed by IR and NMR, changed slightly by blending with copper after aging at higher temperatures. Multiple items influenced the thermal stability of PA66 blended with a small amount of copper instead of just one. Namely, the main chain of PA66 is cut by heat and the degree of the cut is restrained by the copper. The diffusion time of copper atoms that disperse uniformly in the PA66 matrix is short enough to cover the individual amide groups and the effect enlarges the entire configuration of the PA66 chain to enhance the thermal stability. (author)

  10. Computer Simulation Study of the Stability Mechanism of Thermophile, MJ0305

    Science.gov (United States)

    Song, Hyundeok; Beck, Thomas

    2011-04-01

    Methanococcus jannaschii (MJ) is a methane-producing thermophile, which was discovered in a 2600m-deep Pacific Ocean vent in 1983. It has the ability to thrive at high temperatures and high pressures, which are unfavorable for most life forms. There have been some experiments to study its stability under extreme conditions, but still the origin of the stability of MJ is not exactly known. MJ0305 is MJ's chloride channel protein. The structure of MJ0305 was built by homology modeling. We compared the stability of MJ0305 with mesophilic Ecoli at 300K, 330K, and 360K by computer simulation to test the effects of temperature. Our results show that high temperatures significantly affect the number of salt bridges and hydrogen bonds. High temperatures decreased the average number of hydrogen bonds for Ecoli and MJ0305. Increased salt bridges at 330K make MJ0305 more stable. Network analysis of MJ0305 showed an increase in the number of hubs at high temperatures. In contrast, the number of hubs of Ecoli was decreased at high temperatures. Calculated network entropy is proportional to the number of hubs. Increased network entropy of MJ0305 at 330K implies increased robustness.

  11. Nanohydroxyapatite Silicate-Based Cement Improves the Primary Stability of Dental Implants: An In Vitro Study

    Directory of Open Access Journals (Sweden)

    Hooman Khorshidi

    2017-01-01

    Full Text Available Objectives. Insufficient cortical bone volume when placing implants can lead to lack of primary stability. The use of cement as a bone fill material in bone defects around dental implant could result in better clinical outcome. HA has shown excellent biological properties in implant dentistry. The purpose of this study was to evaluate the effect of nanohydroxyapatite powder (Nano-HA in combination with accelerated Portland cement (APC on implant primary stability in surgically created circumferential bone defects in a bovine rib in vitro model. Materials and Methods. Sixteen bovine rib bones and thirty-six implants of same type and size (4 mm × 10 mm were used. Implants were divided into six groups: no circumferential bone defect, defect and no grafting, bone chips grafting, Nano-HA grafting, APC grafting, and Nano-HA mixed to APC grafting (Nano-HA-APC. Circumferential defects around the implants were prepared. The implant stability quotient (ISQ values were measured before and after the grafting. Results. APC exhibited the highest ISQ values. A significant increase of ISQ values following the grafting of Nano-HA-APC (18.08±5.82 and APC alone (9.50±4.12 was achieved. Increase of ISQ values after 72 hours was 24.16±5.01 and 17.58±4.89, respectively. Nano-HA grafting alone exhibited the least rise in ISQ values. Conclusions. Nanohydroxyapatite silicate-based cement could improve the primary stability of dental implants in circumferential bone defect around implants.

  12. Updated secondary implant stability data of two dental implant systems. A retrospective cohort study.

    Science.gov (United States)

    Grognard, Nicolas; Verleye, Gino; Mavreas, Dimitrios; Vande-Vannet, Bart

    2017-09-01

    At present, updated secondary implant stability data generated by actual versions of resonance frequency analysis (RFA) and mobility measurement (MM) electronic devices of 2 different implant systems with actual manufactured surfaces seem to lack and/or are incomplete. Secondary implant stability data based on both RFA and MM measurements were collected and analyzed from 44 formerly treated patients (24 f, 20 m) that received either Ankylos Cellplus (Ø3.5mm) (A) (n=36) or Straumann regular neck SLA tissue level (Ø4.1mm) (S) (n=37) implants in posterior positions of both jawbones (total number= 72). These results were interpretated in view of formerly published data. Estimated RFA outcomes (mean±SD) for A implants were of 81.23 (±0.65) (LP) - 76.15 (±1.57) (UP) isq; for S implants 76.15 (±1.48) (LP) - 73.88 (±2.34) (UP) isq. Estimated MM outcomes for A implants were (-4.0) (±0.23) (LP) - (-3.2) (±0.33) (UP) ptv; for S implants (-5.15) (±0.39) (LP) - (-4.4) (±0.84) (UP) ptv. According to GEE statistical modelling, implant type and - position seems to influence the outcome variables ( p 0.05). Secondary implant stability values, recorded with current RFA and MM devices, of A Cellplus implants are provided for the first time. A difference of 14.7-9.7 isq values was noted for CellPlus versus TPS S implants recorded with a cabled RFA device. This study supports the assumption that RFA outcomes generated with first generation RFA devices are different from those obtained with current RFA devices, meaning that its use in reviews need caution and correction. Key words: Secondary implant stability, resonance frequency analysis, Periotest, Osstell Mentor, Straumann, Ankylos, CellPlus, SLA.

  13. Stability studies of lincomycin hydrochloride in aqueous solution and intravenous infusion fluids.

    Science.gov (United States)

    Czarniak, Petra; Boddy, Michael; Sunderland, Bruce; Hughes, Jeff D

    2016-01-01

    The purpose of this study was to evaluate the chemical stability of Lincocin(®) (lincomycin hydrochloride) in commonly used intravenous fluids at room temperature (25°C), at accelerated-degradation temperatures and in selected buffer solutions. The stability of Lincocin(®) injection (containing lincomycin 600 mg/2 mL as the hydrochloride) stored at 25°C±0.1°C in sodium lactate (Hartmann's), 0.9% sodium chloride, 5% glucose, and 10% glucose solutions was investigated over 31 days. Forced degradation of Lincocin(®) in hydrochloric acid, sodium hydroxide, and hydrogen peroxide was performed at 60°C. The effect of pH on the degradation rate of lincomycin hydrochloride stored at 80°C was determined. Lincomycin hydrochloride w as found to maintain its shelf life at 25°C in sodium lactate (Hartmann's) solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution, with less than 5% lincomycin degradation occurring in all intravenous solutions over a 31-day period. Lincomycin hydrochloride showed less rapid degradation at 60°C in acid than in basic solution, but degraded rapidly in hydrogen peroxide. At all pH values tested, lincomycin followed first-order kinetics. It had the greatest stability near pH 4 when stored at 80°C (calculated shelf life of 4.59 days), and was least stable at pH 2 (calculated shelf life of 0.38 days). Lincocin(®) injection was chemically found to have a shelf life of at least 31 days at 25°C when added to sodium lactate (Hartmann's) solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution. Solutions prepared at approximately pH 4 are likely to have optimum stability.

  14. Study of the local stability of a feedback control having rectifiers with a controlled grid

    International Nuclear Information System (INIS)

    Katz, A.

    1962-01-01

    The equivalence of a rectifier with a controlled grid and a sampled device is established. Then, the sampled servomechanism theory is applied to the study of the response and of the local stability of a feedback control having a rectifiers system charged by an inductance-resistance assembly, in the case of the permanent conduction. The case of a feedback control of the first order and then of the second order are studied. The expressions of the test and sampled responses with a sinusoidal input is given. (O.M.) [fr

  15. Study of thermal stability and degradation of fire resistant candidate polymers for aircraft interiors

    Science.gov (United States)

    Hsu, M. T. S.

    1976-01-01

    The thermochemistry of bismaleimide resins and phenolphthalein polycarbonate was studied. Both materials are fire-resistant polymers and may be suitable for aircraft interiors. The chemical composition of the polymers has been determined by nuclear magnetic resonance and infrared spectroscopy and by elemental analysis. Thermal properties of these polymers have been characterized by thermogravimetric analyses. Qualitative evaluation of the volatile products formed in pyrolysis under oxidative and non-oxidative conditions has been made using infrared spectrometry. The residues after pyrolysis were analyzed by elemental analysis. The thermal stability of composite panel and thermoplastic materials for aircraft interiors was studied by thermogravimetric analyses.

  16. Study of the stability of the gallium isotopes beyond the N = 50 neutron shell closure

    CERN Multimedia

    We propose to study the stability of the nuclear structure beyond N = 50 and Z = 28 with beams of neutron-rich gallium isotopes at the CRIS experiment at ISOLDE. The study of their hyperne structure and isotope shift will provide spins, magnetic dipole moments, electric quadrupole moments and changes in the mean-square charge radii. The $\\beta$-decay of $^{80}$Ga will be unambiguously measured using the technique of Laser Assisted Nuclear Decay Spectroscopy (LANDS). The half-lives of the very neutron-rich isotopes with N > 54 will be measured for their impact on the astrophysical ${r}$-process.

  17. Study of the influence of imperfections on the dynamic stability of tanks

    International Nuclear Information System (INIS)

    Uras, R.A.; Liu, Wing Kam; Chen, Yi-Jung

    1990-01-01

    The influence of geometrical imperfections on the dynamic stability of liquid-filled shells under horizontal ground excitation is studied. Some basic concepts in the large deformation and large deformation thin shell theory are recalled. The work done by inertial and internal forces are given in the Gaussian surface coordinate system. A general imperfection pattern in the circumferential direction is introduced. The emphasis is particularly dedicated to the analysis of the geometrical stiffness term. Different patterns are studied to explain the occurrence of additional instability regions. 6 refs., 1 fig., 3 tabs

  18. Study of stability of time-domain features for electromyographic pattern recognition

    Directory of Open Access Journals (Sweden)

    Huang He

    2010-05-01

    Full Text Available Abstract Background Significant progress has been made towards the clinical application of human-machine interfaces (HMIs based on electromyographic (EMG pattern recognition for various rehabilitation purposes. Making this technology practical and available to patients with motor deficits requires overcoming real-world challenges, such as physical and physiological changes, that result in variations in EMG signals and systems that are unreliable for long-term use. In this study, we aimed to address these challenges by (1 investigating the stability of time-domain EMG features during changes in the EMG signals and (2 identifying the feature sets that would provide the most robust EMG pattern recognition. Methods Variations in EMG signals were introduced during physical experiments. We identified three disturbances that commonly affect EMG signals: EMG electrode location shift, variation in muscle contraction effort, and muscle fatigue. The impact of these disturbances on individual features and combined feature sets was quantified by changes in classification performance. The robustness of feature sets was evaluated by a stability index developed in this study. Results Muscle fatigue had the smallest effect on the studied EMG features, while electrode location shift and varying effort level significantly reduced the classification accuracy for most of the features. Under these disturbances, the most stable EMG feature set with combination of four features produced at least 16.0% higher classification accuracy than the least stable set. EMG autoregression coefficients and cepstrum coefficients showed the most robust classification performance of all studied time-domain features. Conclusions Selecting appropriate EMG feature combinations can overcome the impact of the studied disturbances on EMG pattern classification to a certain extent; however, this simple solution is still inadequate. Stabilizing electrode contact locations and developing

  19. Analytical Approaches for Identification and Representation of Critical Protection Systems in Transient Stability Studies

    Science.gov (United States)

    Hedman, Mojdeh Khorsand

    After a major disturbance, the power system response is highly dependent on protection schemes and system dynamics. Improving power systems situational awareness requires proper and simultaneous modeling of both protection schemes and dynamic characteristics in power systems analysis tools. Historical information and ex-post analysis of blackouts reaffirm the critical role of protective devices in cascading events, thereby confirming the necessity to represent protective functions in transient stability studies. This dissertation is aimed at studying the importance of representing protective relays in power system dynamic studies. Although modeling all of the protective relays within transient stability studies may result in a better estimation of system behavior, representing, updating, and maintaining the protection system data becomes an insurmountable task. Inappropriate or outdated representation of the relays may result in incorrect assessment of the system behavior. This dissertation presents a systematic method to determine essential relays to be modeled in transient stability studies. The desired approach should identify protective relays that are critical for various operating conditions and contingencies. The results of the transient stability studies confirm that modeling only the identified critical protective relays is sufficient to capture system behavior for various operating conditions and precludes the need to model all of the protective relays. Moreover, this dissertation proposes a method that can be implemented to determine the appropriate location of out-of-step blocking relays. During unstable power swings, a generator or group of generators may accelerate or decelerate leading to voltage depression at the electrical center along with generator tripping. This voltage depression may cause protective relay mis-operation and unintentional separation of the system. In order to avoid unintentional islanding, the potentially mis-operating relays

  20. Stability studies of lincomycin hydrochloride in aqueous solution and intravenous infusion fluids

    Directory of Open Access Journals (Sweden)

    Czarniak P

    2016-03-01

    Full Text Available Petra Czarniak, Michael Boddy, Bruce Sunderland, Jeff D Hughes School of Pharmacy, Curtin University, Perth, WA, Australia Purpose: The purpose of this study was to evaluate the chemical stability of Lincocin® (lincomycin hydrochloride in commonly used intravenous fluids at room temperature (25°C, at accelerated-degradation temperatures and in selected buffer solutions.Materials and methods: The stability of Lincocin® injection (containing lincomycin 600 mg/2 mL as the hydrochloride stored at 25°C±0.1°C in sodium lactate (Hartmann’s, 0.9% sodium chloride, 5% glucose, and 10% glucose solutions was investigated over 31 days. Forced degradation of Lincocin® in hydrochloric acid, sodium hydroxide, and hydrogen peroxide was performed at 60°C. The effect of pH on the degradation rate of lincomycin hydrochloride stored at 80°C was determined.Results: Lincomycin hydrochloride was found to maintain its shelf life at 25°C in sodium lactate (Hartmann’s solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution, with less than 5% lincomycin degradation occurring in all intravenous solutions over a 31-day period. Lincomycin hydrochloride showed less rapid degradation at 60°C in acid than in basic solution, but degraded rapidly in hydrogen peroxide. At all pH values tested, lincomycin followed first-order kinetics. It had the greatest stability near pH 4 when stored at 80°C (calculated shelf life of 4.59 days, and was least stable at pH 2 (calculated shelf life of 0.38 days.Conclusion: Lincocin® injection was chemically found to have a shelf life of at least 31 days at 25°C when added to sodium lactate (Hartmann’s solution, 0.9% sodium chloride solution, 5% glucose solution, and 10% glucose solution. Solutions prepared at approximately pH 4 are likely to have optimum stability. Keywords: lincomycin, stability, pH, intravenous fluids, IV additives

  1. Synthesis and Stability Studies of α,α‐Difluoro Ester Phospholipids

    DEFF Research Database (Denmark)

    Pedersen, Palle Jacob; Andresen, Thomas Lars; Clausen, Mads Hartvig

    2012-01-01

    The synthesis of two new α,α‐difluoro ester phospholipid conjugates is described and the stability of their liposomal formulations in three different aqueous buffers (pH 4.5, 7.5 and 8.5) has been investigated. The studies confirmed that α,α‐difluoro esters are much more prone to hydrolysis when...... positioned close to the hydrophilic head group of phospholipids than when the functionality is placed in the lipophilic part of the bilayer in liposomes. This observation lends further support to the concept of protecting hydrolysable functionalities by formulation as part of the membrane of liposomes....

  2. Numerical study of solitary wave stability in cubic nonlinear Dirac equations in 1D

    Science.gov (United States)

    Lakoba, T. I.

    2018-02-01

    Recently there has occurred a controversy between the semi-analytical prediction of linear stability of the soliton of the massive Gross-Neveu model and direct numerical observations of its instability for small values of the frequency. We revisit the problem of numerical computation of this soliton, find a mechanism behind the numerical instability observed in earlier studies, and propose methods to stably compute the soliton over long times. Thus, we confirm the semi-analytical prediction of the soliton's being linearly stable.

  3. Study of Thermal Stress Influence on Dimensional Stability of Silicone Molds

    OpenAIRE

    Bajčičák Martin; Šuba Roland

    2014-01-01

    The paper is focused on the study of temperature influence on dimensional stability of silicone molds used for spin casting of the low melting points alloys. The silicone material denoted as TEKSIL Silicone-GP-S was used to produce samples during experiments. The samples were heated to temperatures in the range from 100 up to 250oC for 30 up to 120 min. Dimensional changes of the samples in the radial and axial directions aa well as their change of weight were evaluated. The results of experi...

  4. A Study of Wind Farm Stabilization Using DFIG or STATCOM Considering Grid Requirements

    Directory of Open Access Journals (Sweden)

    K. E Okedu

    2010-01-01

    Full Text Available Recently, the grid codes require taking into account the reactive power of the wind farm in order to contribute to the networkstability, thus operating the wind farm as active compensator devices. This paper presents a comparative study of stabilizinga wind farm using (Doubly Fed Induction Generators DFIGs or using a (Static Synchronous Compensator STATCOM duringwind speed change and grid fault. Simulation results show that the wind farm could be effectively stabilized with bothsystems, but at a reduced cost with the DFIGs system because it can provide reactive power through its frequency converterswithout an external reactive power compensation unit like the STATCOM system significant.

  5. Stability of avocado oil during heating: comparative study to olive oil

    OpenAIRE

    Berasategi, I. (Izaskun); Barriuso, B. (Blanca); Ansorena, D. (Diana); Astiasarán, I. (Iciar)

    2012-01-01

    The stability of the saponifiable and unsaponifiable fractions of avocado oil, under a drastic heating treatment, was studied and compared to that of olive oil. Avocado and olive oil were characterised and compared at time 0 h and after different times of heating process (180 °C). PUFA/SFA (0.61 at t = 0) and ω-6/ω-3 (14.05 at t = 0) were higher in avocado oil than in olive oil during the whole experiment. Avocado oil was richer than olive oil in total phytosterols at time 0 h (339.64; 228.27...

  6. STUDYING THE INFLUENCE OF THE PYRENE INTERCALATOR TINA ON THE STABILITY OF DNA i-MOTIFS

    DEFF Research Database (Denmark)

    El-Sayed, Ahmed A.; Pedersen, Erik Bjerregaard; Khaireldin, Nahid A.

    2012-01-01

    Certain cytosine-rich (C-rich) DNA sequences can fold into secondary structures as four-stranded i-motifs with hemiprotonated base pairs. Here we synthesized C-rich TINA-intercalating oligonucleotides by inserting a nonnucleotide pyrene moiety between two C-rich regions. The stability of their i......-motif structures was studied by using UV melting temperature measurements and circular dichroism spectra at different pH values under noncrowding and crowding conditions (20% poly(ethylene glycol)). When TINA ((R)-3-((4-(1-pyrenylethynyl)benzyl)oxy) propane-1,2-diol) is inserted, the oligonucleotides could form...

  7. Study of stability of terrylitine chemically bound with polymer to γ-irradiation

    International Nuclear Information System (INIS)

    Yudanova, T.N.; Skokova, I.F.; Dovbij, E.V.; Kalashnik, A.T.

    1987-01-01

    Using ESR method the mechanism of the increase in stability to γ-irradiation of proteolytic enzyme terrylitine immobilized on cellulose derivatives, has been studied. It is shown that in the process of γ-sterilization by the doses of 25 kGy at the dose rate 1.1 Gy/s migration of terrylitine free valency to macromolecule of polymer-carrier takes place, and in certain cases recombination of enzyme and polymer macroradicals occurs. Due to the fact proteolytic activity of immobilized terrylitine during γ-sterilization does not decrease practically

  8. Stability of buffer-free freeze-dried formulations: A feasibility study of a monoclonal antibody at high protein concentrations.

    Science.gov (United States)

    Garidel, Patrick; Pevestorf, Benjamin; Bahrenburg, Sven

    2015-11-01

    We studied the stability of freeze-dried therapeutic protein formulations over a range of initial concentrations (from 40 to 160 mg/mL) and employed a variety of formulation strategies (including buffer-free freeze dried formulations, or BF-FDF). Highly concentrated, buffer-free liquid formulations of therapeutic monoclonal antibodies (mAbs) have been shown to be a viable alternative to conventionally buffered preparations. We considered whether it is feasible to use the buffer-free strategy in freeze-dried formulations, as an answer to some of the known drawbacks of conventional buffers. We therefore conducted an accelerated stability study (24 weeks at 40 °C) to assess the feasibility of stabilizing freeze-dried formulations without "classical" buffer components. Factors monitored included pH stability, protein integrity, and protein aggregation. Because the protein solutions are inherently self-buffering, and the system's buffer capacity scales with protein concentration, we included highly concentrated buffer-free freeze-dried formulations in the study. The tested formulations ranged from "fully formulated" (containing both conventional buffer and disaccharide stabilizers) to "buffer-free" (including formulations with only disaccharide lyoprotectant stabilizers) to "excipient-free" (with neither added buffers nor stabilizers). We evaluated the impacts of varying concentrations, buffering schemes, pHs, and lyoprotectant additives. At the end of 24 weeks, no change in pH was observed in any of the buffer-free formulations. Unbuffered formulations were found to have shorter reconstitution times and lower opalescence than buffered formulations. Protein stability was assessed by visual inspection, sub-visible particle analysis, protein monomer content, charge variants analysis, and hydrophobic interaction chromatography. All of these measures found the stability of buffer-free formulations that included a disaccharide stabilizer comparable to buffer

  9. Ultrasonic Studies of Emulsion Stability in the Presence of Magnetic Nanoparticles

    OpenAIRE

    Józefczak, A.; Wlazło, R.

    2015-01-01

    Pickering emulsions are made of solid particle-stabilized droplets suspended in an immiscible continuous liquid phase. A magnetic emulsion can be obtained using magnetic particles. Solid magnetic nanoparticles are adsorbed strongly at the oil-water interface and are able to stabilize emulsions of oil and water. In this work emulsions stabilized by magnetite nanoparticles were obtained using high-energy ultrasound waves and a cavitation mechanism and, next, their stability in time was tested b...

  10. Experimental Study of Hydrogen Addition Effects on a Swirl-Stabilized Methane-Air Flame

    Directory of Open Access Journals (Sweden)

    Mao Li

    2017-11-01

    Full Text Available The effects of H2 addition on a premixed methane-air flame was studied experimentally with a swirl-stabilized gas turbine model combustor. Experiments with 0%, 25%, and 50% H2 molar fraction in the fuel mixture were conducted under atmospheric pressure. The primary objectives are to study the impacts of H2 addition on flame lean blowout (LBO limits, flame shapes and anchored locations, flow field characteristics, precessing vortex core (PVC instability, as well as the CO emission performance. The flame LBO limits were identified by gradually reducing the equivalence ratio until the condition where the flame physically disappeared. The time-averaged CH chemiluminescence was used to reveal the characteristics of flame stabilization, e.g., flame structure and stabilized locations. In addition, the inverse Abel transform was applied to the time-averaged CH results so that the distribution of CH signal on the symmetric plane of the flame was obtained. The particle image velocimetry (PIV was used to detect the characteristics of the flow field with a frequency of 2 kHz. The snapshot method of POD (proper orthogonal decomposition and fast Fourier transform (FFT were adopted to capture the most prominent coherent structures in the turbulent flow field. CO emission was monitored with an exhaust probe that was installed close to the combustor exit. The experimental results indicated that the H2 addition extended the flame LBO limits and the operation range of low CO emission. The influence of H2 addition on the flame shape, location, and flow field was observed. With the assistance of POD and FFT, the combustion suppression impacts on PVC was found.

  11. The role of mast cell stabilization in treatment of postoperative ileus: a pilot study.

    Science.gov (United States)

    The, Frans O; Buist, Marrije R; Lei, Aaltje; Bennink, Roelof J; Hofland, Jan; van den Wijngaard, René M; de Jonge, Wouter J; Boeckxstaens, Guy E

    2009-09-01

    Although postoperative ileus (POI) is considered multifactorial, intestinal inflammation resulting from manipulation-induced mast cell activation is recognized as an important pathophysiological mechanism. Therefore, mast cell stabilization may represent a new therapeutic approach to shortening POI. The aim of this paper was to study the effect of ketotifen, a mast cell stabilizer, on postoperative gastrointestinal transit in patients who underwent abdominal surgery. In this pilot study, 60 patients undergoing major abdominal surgery for gynecological malignancy with standardized anesthesia were randomized to treatment with ketotifen (4 or 12 mg) or placebo. Patients were treated for 6 days, starting 3 days before surgery. Gastric emptying of liquids, selected as a primary outcome parameter, was measured 24 h after surgery using scintigraphy. Secondary end points were (scintigraphically assessed) colonic transit, represented as geometrical center of activity (segment 1(cecum) to 7(stool)) and clinical parameters. Gastric retention 1 h after liquid intake was significantly reduced by 12 mg (median 3% (1-7), P=0.01), but not by 4 mg ketotifen (18% (3-45), P=0.6) compared with placebo (16% (5-75)). Twenty-four hour colonic transit in placebo was 0.8 (0.0-1.1) vs. 1.2 (0.2-1.4) colon segments in the 12 mg ketotifen group (P=0.07). Abdominal cramps were significantly relieved in patients treated with 12 mg ketotifen, whereas other clinical parameters were not affected. Ketotifen significantly improves gastric emptying after abdominal surgery and warrants further exploration of mast cell stabilizers as putative therapy for POI.

  12. Stability study and lyophilization of vitamin E-loaded nanocapsules prepared by membrane contactor.

    Science.gov (United States)

    Khayata, N; Abdelwahed, W; Chehna, M F; Charcosset, C; Fessi, H

    2012-12-15

    In this research, we studied the accelerated stability of vitamin E-loaded nanocapsules (NCs) prepared by the nanoprecipitation method. Vitamin E-loaded NCs were optimized firstly at the laboratory scale and then scaled up using the membrane contactor technique. The optimum conditions of the membrane contactor preparation (pilot scale) produced vitamin E-loaded NCs with an average size of 253 nm, polydispersity index 0.19 and a zeta potential -16 mV. The average size, polydispersity index and zeta potential values were 185 nm, 0.12 and -15 mV, respectively for the NCs prepared at laboratory scale. No significant changes were noticed in these values after 3 and 6 months of storage at high temperature (40±2 °C) and relative humidity (75±5%) in spite of vitamin E sensitivity to light, heat and oxygen. The entrapment efficiency of NCs prepared at pilot scale was 97% at the beginning of the stability study, and became (95%, 59%) after 3 and 6 months of storage, respectively. These values at lab-scale were (98%, 96%, and 89%) at time zero and after 3 and 6 months of storage, respectively. This confirms the ability of vitamin E encapsulation to preserve its stability, which is one major goal of our work. Lyophilization of the optimized formula at lab-scale was also performed. Four types of cryoprotectants were tested (poly(vinyl pyrrolidone), sucrose, mannitol, and glucose). Freeze-dried NCs prepared with sucrose were found acceptable. The other lyophilized NCs obtained at different conditions presented large aggregates. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Validation of an analytical method applicable to study of 1 mg/mL oral Risperidone solution stability

    International Nuclear Information System (INIS)

    Abreu Alvarez, Maikel; Garcia Penna, Caridad Margarita; Martinez Miranda, Lissette

    2010-01-01

    A validated analytical method by high-performance liquid chromatography (HPLC) was applicable to study of 1 mg/mL Risperidone oral solution stability. The above method was linear, accurate, specific and exact. A stability study of the 1 mg/mL Risperidone oral solution was developed determining its expiry date. The shelf life study was conducted for 24 months at room temperature; whereas the accelerated stability study was conducted with product under influence of humidity and temperature; analysis was made during 3 months. Formula fulfilled the quality specifications described in Pharmacopeia. The results of stability according to shelf life after 24 months showed that the product maintains the parameters determining its quality during this time and in accelerated studies there was not significant degradation (p> 0.05) in the product. Under mentioned conditions expiry date was of 2 years

  14. First principles study of structural stability and site preference in Co3 (W,X

    Directory of Open Access Journals (Sweden)

    Joshi Sri Raghunath

    2014-01-01

    Full Text Available Since the discovery [1] of γ′ precipitate (L12 – Co3(Al, W in the Co-Al-W ternary system, there has been an increased interest in Co-based superalloys. Since these alloys have two phase microstructures (γ + γ′ similar to Ni-based superalloys [2], they are viable candidates in high temperature applications, particularly in land-based turbines. The role of alloying on stability of the γ′ phase has been an active area of research. In this study, electronic structure calculations were done to probe the effect of alloying in Co3W with L12 structure. Compositions of type Co3(W,X, (where X/Y = Mn, Fe, Ni, Pt, Cr , Al, Si, V, W, Ta, Ti, Nb, Hf, Zr and Mo were studied. Effect of alloying on equilibrium lattice parameters and ground state energies was used to calculate Vegard's coefficients and site preference related data. The effect of alloying on the stability of the L12 structure vis a vis other geometrically close packed ordered structures was also studied for a range of Co3X compounds. Results suggest that the penchant of element for the W sublattice can be predicted by comparing heats of formation of Co3X in different structures.

  15. Boron nitride nanotubes coated with organic hydrophilic agents: Stability and cytocompatibility studies

    International Nuclear Information System (INIS)

    Ferreira, Tiago Hilário; Soares, Daniel Crístian Ferreira; Moreira, Luciana Mara Costa; Ornelas da Silva, Paulo Roberto; Gouvêa dos Santos, Raquel; Barros de Sousa, Edésia Martins

    2013-01-01

    In the present study, Boron Nitride Nanotubes (BNNTs) were synthesized and functionalized with organic hydrophilic agents constituted by glucosamine (GA), polyethylene glycol (PEG) 1000 , and chitosan (CH) forming new singular systems. Their size, distribution, and homogeneity were determined by photon correlation spectroscopy, while their surface charge was determined by laser Doppler anemometry. The morphology and structural organization were evaluated by Transmission Electron Microscopy. The functionalization was evaluated by Thermogravimetry analysis and Fourier Transformer Infrared Spectroscopy. The results showed that BNNTs were successfully obtained and functionalized, reaching a mean size and dispersity deemed adequate for in vitro studies. The in vitro stability tests also revealed a good adhesion of functionalized agents on BNNT surfaces. Finally, the in vitro cytocompatibility of functionalized BNNTs against MCR-5 cells was evaluated, and the results revealed that none of the different functionalization agents disturbed the propagation of normal cells up to the concentration of 50 μg/mL. Furthermore, in this concentration, no significantly chromosomal or morphologic alterations or increase in ROS (Reactive Oxygen Species) could be observed. Thus, findings from the present study reveal an important stability and cytocompatibility of functionalized BNNTs as new potential drugs or radioisotope nanocarriers to be applied in therapeutic procedures. - Highlights: • BNNTs were synthesized and functionalized with organic hydrophilic agents. • Hydrophilic molecules do not alter the biocompatibility profile of BNNTs. • No significantly chromosomal or morphologic alterations in ROS could be observed

  16. Boron nitride nanotubes coated with organic hydrophilic agents: Stability and cytocompatibility studies

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Tiago Hilário; Soares, Daniel Crístian Ferreira; Moreira, Luciana Mara Costa; Ornelas da Silva, Paulo Roberto [Serviço de Nanotecnologia, Centro de Desenvolvimento da Tecnologia Nuclear CDTN/CNEN, Avenida Presidente Antônio Carlos, 6.627, Campus da UFMG, Pampulha, CEP 31270-901 Belo Horizonte, Minas Gerais (Brazil); Gouvêa dos Santos, Raquel [Laboratório de Radiobiologia, Centro de Desenvolvimento da Tecnologia Nuclear CNEN/CDTN, Av. Presidente Antônio Carlos 6.627, Campus da UFMG, Pampulha, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Barros de Sousa, Edésia Martins, E-mail: sousaem@cdtn.br [Serviço de Nanotecnologia, Centro de Desenvolvimento da Tecnologia Nuclear CDTN/CNEN, Avenida Presidente Antônio Carlos, 6.627, Campus da UFMG, Pampulha, CEP 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2013-12-01

    In the present study, Boron Nitride Nanotubes (BNNTs) were synthesized and functionalized with organic hydrophilic agents constituted by glucosamine (GA), polyethylene glycol (PEG){sub 1000}, and chitosan (CH) forming new singular systems. Their size, distribution, and homogeneity were determined by photon correlation spectroscopy, while their surface charge was determined by laser Doppler anemometry. The morphology and structural organization were evaluated by Transmission Electron Microscopy. The functionalization was evaluated by Thermogravimetry analysis and Fourier Transformer Infrared Spectroscopy. The results showed that BNNTs were successfully obtained and functionalized, reaching a mean size and dispersity deemed adequate for in vitro studies. The in vitro stability tests also revealed a good adhesion of functionalized agents on BNNT surfaces. Finally, the in vitro cytocompatibility of functionalized BNNTs against MCR-5 cells was evaluated, and the results revealed that none of the different functionalization agents disturbed the propagation of normal cells up to the concentration of 50 μg/mL. Furthermore, in this concentration, no significantly chromosomal or morphologic alterations or increase in ROS (Reactive Oxygen Species) could be observed. Thus, findings from the present study reveal an important stability and cytocompatibility of functionalized BNNTs as new potential drugs or radioisotope nanocarriers to be applied in therapeutic procedures. - Highlights: • BNNTs were synthesized and functionalized with organic hydrophilic agents. • Hydrophilic molecules do not alter the biocompatibility profile of BNNTs. • No significantly chromosomal or morphologic alterations in ROS could be observed.

  17. A game theory model for stabilizing price of chili: A case study

    Science.gov (United States)

    Wardayanti, Ari; Aviv, Afgan Suffan; Sutopo, Wahyudi; Hisjam, Muh.

    2017-11-01

    Chili is one of the important agricultural commodity in Indonesia because of its widely consumption by the Indonesian. Chili becomes one of the commodities that experience price fluctuations and important cause of yearly inflation in Indonesia. The unstable price of chili is affected by the scarcity of the commodity in some months and the difference of the harvest season. This study proposes a model to solve the problem by considering the substitution of fresh chilies with dried chili. We propose the cooperative of chili's farmer as entities that process fresh chili into dry ones. The existence of substitution products is expected to maintain the price stability chili. This research was conducted by taking a case study on chili commodity markets in Surakarta which consists of 19 traditional markets. This study aims to create a price stabilization scheme with product substitution using a game theory model. There are 4 strategies proposed in game theory model to describe the relationship between producers and consumers. In this case, the producers are the farmers and the consumers are the trade market. A mixed strategy of was chosen to determine the optimal value among 4 strategies. From the calculation results obtained optimal value when doing a mixed strategy of IDR 201,188,829,000.

  18. Physiochemical and cytotoxicity study of TPGS stabilized nanoemulsion designed by ultrasonication method.

    Science.gov (United States)

    Kaur, Khushwinder; Kumar, Raj; Arpita; Goel, Sumit; Uppal, Shivani; Bhatia, Alka; Mehta, S K

    2017-01-01

    The main aim of the present work was to prepare TPGS stabilized D-α-Tocopherol, lemon oil, tween-80, and water nanoemulsion by low cost and highly effective sonication method. The prepared nanoemulsion showed good stability for 60days at variable temperature conditions i.e. 4, 25 and 37°C. The tolerance of the prepared nanoemulsion to salt (50mM-500mM) and pH (pH 2-pH 7.4) was also studied. The morphology and droplet size of pure and quinine loaded nanoemulsion was characterized with transmission electron microscopy. The prepared formulation was transparent and the obtained average particle size ranged between 25nm and 35nm. The nanoemulsion was found to be non toxic. The cell viability study of pure nanoemulsion carried out on Hep G2 cells revealed that the cell viability was 100%. The formulation further exhibited high quinine loading and release capacity with cumulative release up to 76±2% and 65±2% at pH 7.4 and pH 5.5 respectively. The interaction between quinine and vitamins (riboflavin, thiamine and biotin) was also carried out (aqueous medium). The study revealed that riboflavin had strong interaction with quinine and vitamins vis-à-vis thiamine and biotin. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Tokamak power systems studies, FY 1986: A second stability power reactor

    International Nuclear Information System (INIS)

    Ehst, D.; Baker, C.; Billone, M.

    1987-03-01

    This report presents the results of the work at Argonne National Laboratory (ANL) during FY-1986 on the Tokamak Power Systems Study (TPSS). The purpose of the TPSS is to explore and develop ideas that would lead to improvements in the tokamak as a power reactor concept. The work at ANL concentrated on plasma engineering, impurity control, and the blanket/first wall/shield system. The work in FY-1986 extended these studies and focused them on a reference design point. The key features of the design point include: second stability regime with higher β and larger aspect ratio, steady-state operation with fast wave current drive, impurity control via a self-pumped slot limiter, a self-cooled liquid lithium, vanadium alloy blanket with simplified poloidal flow, and reduced reactor building volume with vertical lift maintenance. Sufficient work was carried out to report a preliminary cost estimate. In addition, reactor implications of steady-state operation in the first stability regime were also studied. 174 refs., 124 figs., 65 tabs

  20. Efficacy and Stability studies of microbial folate fortified fruit juices prepared using probiotic microorganism.

    Science.gov (United States)

    Deep, S; Ojha, S; Kundu, S

    2017-07-31

    Folate, natural form of water soluble vitamin folic acid, is significant for humans as involved in most important metabolic reactions i.e. nucleotide synthesis and amino acid inter conversions. Thus its deficiency causes neural tube defects in newborns and cardiovascular diseases, and cancers. Humans cannot synthesize folate de novo so consumption through diet is essential. Natural food sources, supplements and fortified food products are the choices available to complete the Daily recommended intake. However microbial fortification using probiotics recently gained wide attention due to dual advantage of natural food matrix with enhanced folate content along with the probiotics benefits. Current study was focused on the microbial fortification of fruit juices and their efficacy and stability studies. Freshly filtered orange and tomato juice was prepared and inoculated with Streptococcus thermophilus NCIM 2904. Incubation was done at 40°C and samples were collected at different time interval. Folate extraction was done using human plasma and content was measured by microbiological assay using Lactobacillus casei NCIM No. 2364. Efficacy and stability studies were carried out to ensure the quality of juices to be consumed in terms of folate content, viable cell count and pH after 4 weeks of storage at low temperature. Positive results were observed as folate content was quite stable whereas viable cell count was also found to be significant till some time without adding any preservatives. The results indicated that fortified fruit juices could be used as probiotic beverages with enhanced folate content.

  1. Pterodon pubescens Benth: stability study of microencapsulated extract and isolated compounds monitored by antinociceptive assays

    International Nuclear Information System (INIS)

    Servat, Leila; Spindola, Humberto M.; Carvalho, Joao E. de; Foglio, Mary A.; Rodrigues, Rodney A.F.; Sousa, Ilza M.O.; Ruiz, Ana L.T.G.

    2012-01-01

    Pterodon pubescens Benth. (Pp) seeds, commercially available in Brazil, are used in folk medicine in anti-inflammatory, analgesic, and anti-rheumatic preparations. The present study demonstrated the antinociceptive properties of isomers 6a-hydroxy-7β-acetoxy-vouacapan-17β--oate methyl ester and 6a-acetoxy-7β-hydroxy-vouacapan-17β-oate methyl ester (C1), isolated from (Pp), employing different experimental models. A stability study was performed to investigate the relationship of microencapsulation by spray-drying on the maintenance of antinociceptive action. Therefore, C1 and Pp extract samples were monitored in accelerated stability study, evaluating both microencapsulated and non-microencapsulated samples. It was observed that sample C1 possess antinociceptive activity revealed by writhing and formalin tests; C1 showed significantly anti-allodynic, but not ntihyperalgesic effect; the microencapsulation maintained the activity and integrity of both, sample C1 and Pp crude extract; microencapsulation by spray drying is a useful alternative to increase shelf life. (author)

  2. Internet Addiction: Stability and Change

    Science.gov (United States)

    Huang, Chiungjung

    2010-01-01

    This longitudinal study examined five indices of stability and change in Internet addiction: structural stability, mean-level stability, differential stability, individual-level stability, and ipsative stability. The study sample was 351 undergraduate students from end of freshman year to end of junior year. Convergent findings revealed stability…

  3. Experimental study of the coupled thermo-hydraulic-neutronic stability of a natural circulation HPLWR

    Energy Technology Data Exchange (ETDEWEB)

    T' Joen, C., E-mail: c.g.a.tjoen@tudelft.nl [Delft University of Technology, Department Radiation, Radionuclides and Reactors, Mekelweg 15, 2629 JB Delft (Netherlands); Ghent University, Department of Flow, Heat and Combustion Mechanics, Sint-Pietersnieuwstraat 41, 9000 Gent (Belgium); Rohde, M. [Delft University of Technology, Department Radiation, Radionuclides and Reactors, Mekelweg 15, 2629 JB Delft (Netherlands)

    2012-01-15

    Highlights: Black-Right-Pointing-Pointer No pure thermo-hydraulic instabilities were recorded. Black-Right-Pointing-Pointer A large unstable zone was found for the coupled thermo-hydraulic-neutronic mode. Black-Right-Pointing-Pointer The instabilities are similar to the type I instabilities of boiling systems. Black-Right-Pointing-Pointer The low power stability threshold crosses the equivalent reference line h{sub out} = h{sub pc}. - Abstract: The HPLWR (high performance light water reactor) is the European concept design for a SCWR (supercritical water reactor). This unique reactor design consists of a three pass core with intermediate mixing plena. As the supercritical water passes through the core, it experiences a significant density reduction. This large change in density could be used as the driving force for natural circulation of the coolant, adding an inherent safety feature to this concept design. The idea of natural circulation has been explored in the past for boiling water reactors (BWR). From those studies, it is known that the different feedback mechanisms can trigger flow instabilities. These can be purely thermo-hydraulic (driven by the friction - mass flow rate or gravity - mass flow rate feedback of the system), or they can be coupled thermo-hydraulic-neutronic (driven by the coupling between friction, mass flow rate and power production). The goal of this study is to explore the stability of a natural circulation HPLWR considering the thermo-hydraulic-neutronic feedback. This was done through a unique experimental facility, DeLight, which is a scaled model of the HPLWR using Freon R23 as a scaling fluid. An artificial neutronic feedback was incorporated into the system based on the average measured density. To model the heat transfer dynamics in the rods, a simple first order model was used with a fixed time constant of 6 s. The results include the measurements of the varying decay ratio (DR) and frequency over a wide range of operating

  4. Protein thermal stability enhancement by designing salt bridges: a combined computational and experimental study.

    Directory of Open Access Journals (Sweden)

    Chi-Wen Lee

    Full Text Available Protein thermal stability is an important factor considered in medical and industrial applications. Many structural characteristics related to protein thermal stability have been elucidated, and increasing salt bridges is considered as one of the most efficient strategies to increase protein thermal stability. However, the accurate simulation of salt bridges remains difficult. In this study, a novel method for salt-bridge design was proposed based on the statistical analysis of 10,556 surface salt bridges on 6,493 X-ray protein structures. These salt bridges were first categorized based on pairing residues, secondary structure locations, and Cα-Cα distances. Pairing preferences generalized from statistical analysis were used to construct a salt-bridge pair index and utilized in a weighted electrostatic attraction model to find the effective pairings for designing salt bridges. The model was also coupled with B-factor, weighted contact number, relative solvent accessibility, and conservation prescreening to determine the residues appropriate for the thermal adaptive design of salt bridges. According to our method, eight putative salt-bridges were designed on a mesophilic β-glucosidase and 24 variants were constructed to verify the predictions. Six putative salt-bridges leaded to the increase of the enzyme thermal stability. A significant increase in melting temperature of 8.8, 4.8, 3.7, 1.3, 1.2, and 0.7°C of the putative salt-bridges N437K-D49, E96R-D28, E96K-D28, S440K-E70, T231K-D388, and Q277E-D282 was detected, respectively. Reversing the polarity of T231K-D388 to T231D-D388K resulted in a further increase in melting temperatures by 3.6°C, which may be caused by the transformation of an intra-subunit electrostatic interaction into an inter-subunit one depending on the local environment. The combination of the thermostable variants (N437K, E96R, T231D and D388K generated a melting temperature increase of 15.7°C. Thus, this study

  5. Synergistic and alkaline stability studies of mixtures of simulated high level waste sludge with selected energetic compounds

    International Nuclear Information System (INIS)

    Fondeur, F.F.

    2000-01-01

    This study examined the stability of mercury oxalate and mercury fulminate in alkaline sludge simulating Savannah River Site waste. These compounds represent two classes of energetic compounds previously speculated as potential components in sludge stored without a supernatant liquid

  6. Digital assessment of occlusal wear patterns on occlusal stabilization splints: a pilot study.

    Science.gov (United States)

    Korioth, T W; Bohlig, K G; Anderson, G C

    1998-08-01

    If masticatory load distribution is task-dependent, then the pattern of wear on an acrylic resin occlusal splint over time may affect clinical outcome. This pilot study quantitatively assessed posterior wear after 3 months on the occlusal surfaces of maxillary stabilization splints. Subjects with known history of nocturnal bruxism were given heat-cured full-arch acrylic resin occlusal stabilization splints to be worn nocturnally for 3 months. Splint occlusion was adjusted at appliance delivery and was refined at the baseline session 1 to 2 weeks later. No further adjustment of the splint surface was performed during the 3-month study period. Sequential impressions of the splint occlusal surface provided epoxy resin models that were digitized and analyzed through specialized software. Changes in the digitized splint surface from baseline to 3 months allowed comparison of wear facets between splint sides and among tooth locations. Splint wear was asymmetric between sides and uneven between dental locations. For full coverage occlusal splints, the appliance wear phenomenon can be site specific and, if left undisturbed, may yield two extremes of high wear and a zone of low wear in-between.

  7. Accelerated stability studies for moisture-induced aggregation of tetanus toxoid.

    Science.gov (United States)

    Jain, Nishant Kumar; Roy, Ipsita

    2011-03-01

    The study was carried out to evaluate the effect of exposing solid tetanus toxoid to moisture in two different ways on the structure and function of the toxoid. Tetanus toxoid was exposed to moisture by (i) the addition of an optimized amount of buffer and (ii) incubation under an environment provided by a saturated solution of K(2)CrO(4.) The changes in the conformational, structural and antigenic properties of tetanus toxoid were measured and compared. Results show that even at a similar level of moisture-induced aggregation, the amounts of water absorbed by the two preparations of tetanus toxoid are different. Differences in antigenicity and changes in structure of the toxoid at primary, secondary and tertiary structure levels were seen. Although both conditions are used to mimic accelerated stability conditions in the laboratory, the final products are different in the two cases. Thus, conditions for 'accelerated stability studies' for therapeutic proteins need to be selected with care so that they resemble the fate of the actual product.

  8. Stabilization of Collagen Fibrils by Gelatin Addition: A Study of Collagen/Gelatin Dense Phases.

    Science.gov (United States)

    Portier, François; Teulon, Claire; Nowacka-Perrin, Agnieszka; Guenneau, Flavien; Schanne-Klein, Marie-Claire; Mosser, Gervaise

    2017-11-14

    Collagen and its denatured form, gelatin, are biopolymers of fundamental interest in numerous fields ranging from living tissues to biomaterials, food, and cosmetics. This study aims at characterizing mixtures of those biopolymers at high concentrations (up to 100 mg·mL -1 ) at which collagen has mesogenic properties. We use a structural approach combining polarization-resolved multiphoton microscopy, polarized light microscopy, magnetic resonance imaging, and transmission electron microscopy to analyze gelatin and collagen/gelatin dense phases in their sol and gel states from the macroscopic to the microscopic scale. We first report the formation of a lyotropic crystal phase of gelatin A and show that gelatin must structure itself in particles to become mesogenic. We demonstrate that mixtures of collagen and gelatin phase segregate, preserving the setting of the pure collagen mesophase at a gelatin ratio of up to 20% and generating a biphasic fractal sample at all tested ratios. Moreover, differential scanning calorimetric analysis shows that each protein separates into two populations. Both populations of gelatins are stabilized by the presence of collagen, whereas only one population of collagen molecules is stabilized by the presence of gelatin, most probably those at the interface of the fibrillated microdomains and of the gelatin phase. Although further studies are needed to fully understand the involved mechanism, these new data should have a direct impact on the bioengineering of those two biopolymers.

  9. Printing inks of electroactive polymer PEDOT:PSS: The study of biocompatibility, stability, and electrical properties.

    Science.gov (United States)

    Stříteský, Stanislav; Marková, Aneta; Víteček, Jan; Šafaříková, Eva; Hrabal, Michal; Kubáč, Lubomír; Kubala, Lukáš; Weiter, Martin; Vala, Martin

    2018-04-01

    Biocompatibility tests and a study of the electrical properties of thin films prepared from six electroactive polymer ink formulations based on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) were performed. The aim was to find a suitable formulation of PEDOT:PSS and conditions for preparing thin films in order to construct printed bioelectronic devices for biomedical applications. The stability and electrical properties of such films were tested on organic electrochemical transistor (OECT)-based sensor platforms and their biocompatibility was evaluated in assays with 3T3 fibroblasts and murine cardiomyocytes. It was found that the thin films prepared from inks without an additive or any thin film post-treatment provide limited conductivity and stability for use in biomedical applications. These properties were greatly improved by using ethylene glycol and thermal annealing. Addition or post-treatment by ethylene glycol in combination with thermal annealing provided thin films with electrical resistance and a stability sufficient to be used in sensing of animal cell physiology. These films coated with collagen IV showed good biocompatibility in the assay with 3T3 fibroblasts when compared to standard cell culture plastics. Selected films were then used in assays with murine cardiomyocytes. We observed that these cells were able to attach to the PEDOT:PSS films and form an active sensor element. Spontaneously beating clusters were formed, indicating a good physiological status for the cardiomyocyte cells. These results open the door to construction of cheap printed electronic devices for biointerfacing in biomedical applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1121-1128, 2018. © 2018 Wiley Periodicals, Inc.

  10. Studies on carotenoids and oxidative stability of winter squash seed and soybean oils

    Directory of Open Access Journals (Sweden)

    Helmy, H. E.

    1992-12-01

    Full Text Available Winter squash seed and soybean oils were extracted with commercial hexane. Carotenoids and other pigments m the oils were studied using spectrophotometric and thin layer chromatographic analysis. Three types of pigments were identified: carotenoids. mainly lutein and β-carotene, chlorophyll and some unidentified pigments. Carotenoids content were 70, 60, 0 ppm in crude, refined and bleached winter squash seed oil, and 80, 65, 0 ppm in crude, refined and bleached soybean oil respectively. Stability was evaluated for crude, refined and bleached winter squash seed and soybean oils and an 1:1 admixture. Mixing winter squash seed oil with soybean oil increased the stability of soybean oil. Crude oil showed greater stability than refined and bleached oils.

    Se han extraído con hexano comercial aceites de semilla de calabaza y de soja. Usando análisis espectrofotométrico y cromatografía en capa fina se han estudiado en estos aceites tres tipos de pigmentos: carotenoides, principalmente luteína y β-caroteno, clorofilas y otros no identificados. Los contenidos en carotenoides fueron 70, 60, 0 ppm en aceite de semilla de calabaza de invierno crudo, refinado y decolorado, y 80, 65, 0 ppm en aceite de soja crudo, refinado y decolorado respectivamente. Se ha evaluado la estabilidad de aceites de semilla de calabaza de invierno, soja y una mezcla 1:1 de ambos, en sus estados crudo, refinado y decolorado. La mezcla de semilla de calabaza de invierno con aceite de soja aumentó la estabilidad de este último. El aceite crudo mostró una mayor estabilidad que los aceites refinados y decolorados.

  11. Sans Studies Insight Into Improving of Yield of Block Copolymer-Stabilized Gold Nanoparticles

    Science.gov (United States)

    Ray, Debes; Aswal, V. K.

    2010-01-01

    Triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) are well known as dispersion stabilizers. It has also been recently found that they can act as reducing agents along with stabilizers and these two properties of block copolymers together have provided a single-step synthesis and stabilization of gold nanoparticles at ambient temperature. We have studied the synthesis of stable gold nanoparticle solutions using block copolymer P85. Gold nanoparticles are prepared from 1 wt% aqueous solution of P85 mixed with varying concentration of HAuCl4.3H2O salt in the range 0.001 to 0.1 wt%. Surface plasmon resonance (SPR) band in UV-visible absorption spectra confirm the formation of the gold nanoparticles and the maximum yield of the nanoparticles is found to be quite low at 0.005 wt% of the salt solution. Small-angle neutron scattering (SANS) measurements in these systems suggest that a very small fraction of the block copolymers (nanoparticles and remaining form their own micelles, which probably results in the low yield. This can be explained as on an average a high block copolymer-to-gold ion ratio r0 (22) is required for 1 wt% P85 in the reduction reaction to produce gold nanoparticles. Based on this understanding, a step-addition method is used to enhance the yield of gold nanoparticles by manifold where the gold salt is added in small steps to maintain higher value of r(>r0) and therefore continuous formation of nanoparticles.

  12. Stability of acute dorsal fracture dislocations of the proximal interphalangeal joint: a biomechanical study.

    Science.gov (United States)

    Tyser, Andrew R; Tsai, Michael A; Parks, Brent G; Means, Kenneth R

    2014-01-01

    We performed a cadaveric biomechanical study to characterize proximal interphalangeal joint stability after an injury to different amounts of the volar articular base of the middle phalanx (intact, 20%, 40%, 60%, and 80% volar defects). Eighteen digits on 6 hands were tested through full proximal interphalangeal joint range of motion using computer-controlled flexion and extension via the digital tendons. We collected proximal interphalangeal joint kinematic cine data in a true lateral projection with mini-fluoroscopy. We measured the amount of dorsal middle phalanx translation in full proximal interphalangeal joint extension. As we cycled the joint from full flexion into extension, we recorded the angle at which subluxation occurred. No specimens with 20% volar bony defect subluxated. All specimens in the 60% and 80% groups subluxated at an average flexion angle of 67° (range, 10° to 90°) in the 60% group and at all degrees of flexion in the 80% group. In the 40% group, 28% of specimens demonstrated subluxation at an average flexion angle of 14° (range, 4° to 40°). Mean dorsal translation of the middle phalanx in relation to the proximal phalanx at full digital extension was 0.2 mm in the 20% group, 0.8 mm in the 40% group, 3.2 mm in the 60% group, and 3.1 mm in the 80% group. Simulated volar articular bony defects of 20% were stable, whereas those with 60% and 80% defects were unstable during digital motion. Stability in the 40% group was variable and appeared to be the threshold for stability. Knowledge of the typical amount of middle phalanx defect and degree of proximal interphalangeal joint extension that can lead to joint instability may improve management of mechanically important proximal interphalangeal joint fracture dislocations. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  13. [Study on effect of demethoxycurcumin in Curcuma long on stability of curcumin].

    Science.gov (United States)

    Han, Gang; Bi, Rui; Le, Quan; Zhao, Lin-Lin; Dong, Yue; Lin, Qing-Hui

    2008-04-01

    To investigate effect of demethoxycurcumin on stability of curcumin. To add the demethoxycurcumin to pure curcumin, the change of curcumin was determined by HPLC and the dynamics of curcumin degradation was investigated. The stability both obtained from alcohol and demethoxycurcumin improved the stabilization of curcumin, the demi-period of curcumin prolonged with the addition of demethoxycurcumin. The commixture of curcumin and demethoxycurcumin are more stable than pure curcumin at the same conditions. Stability of curcumin is improved by demethoxycurcumin,it is crude stabilizing agent.

  14. [Study on effect of different extracts in curcuma long on stability of curcumin].

    Science.gov (United States)

    Han, Gang; Liu, Zheng-Meng; Wang, Xiao-Yan; Wang, Yan-Nan

    2007-05-01

    To investigate effects of different extracted fractions from Curcumia long on the stability of curcumin. There are some constituents that can stabilize curcumin. To add the extracts obtained from C. long were water, alcohol, acetone, ether, ethyl acetate, petroleum ether to pure solution of curcumin. To determine the change of curcumin by high performance liquid chromatography (HPLC). To investigate the dynamics of curcumin degradation. The stability obtained from alcohol, acetone, ether, ethyl ether all improved the stabilization of curcumin. 80% Alcohol extract had the optimal stabilizineg ability for curcumin. The extracts from alcohol are more stable than pure curcumin at same conditions. The stability of curcumin is improved by alcohol extracts.

  15. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    Science.gov (United States)

    Migliardo, F.; Salmeron, C.; Bayan, N.

    2013-10-01

    The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H2O and lecithin/H2O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics.

  16. A novel topical association with zinc oxide, chamomile and aloe vera extracts - stability and safety studies

    Directory of Open Access Journals (Sweden)

    Catarina Reis

    2015-12-01

    Full Text Available Currently, natural products show an enormous potential for pharmaceutical and cosmetic industries. The goals of this study were to formulate and to characterise a novel combination of natural products. Formulations were 1 an oil-in-water emulsion, 2 a water-in-oil emulsion and 3 a cleansing solution. Zinc oxide was chosen as an active ingredient due to its healing properties, and chamomile and aloe vera extracts were chosen due to their antiseptic, anti-inflammatory and tissue regenerating properties. Organoleptic characteristics, pH, viscosity and in vitro efficacy for the most common bacteria and yeast of human skin were evaluated. Preliminary and accelerated stability studies and safety tests were also performed. All optimized products were stable, smooth in texture, effective against bacteria and yeast, and safe, justifying further studies. Results suggest that these novel products might be a promising source of natural compounds with soothing and regenerative properties for skin care.

  17. A study of bilayer phosphorene stability under MoS2-passivation

    Science.gov (United States)

    Son, Youngwoo; Kozawa, Daichi; Tianxiang Liu, Albert; Koman, Volodymyr B.; Wang, Qing Hua; Strano, Michael S.

    2017-06-01

    Despite the unique properties of black phosphorus (BP) and phosphorene, including high carrier mobility and in-plane anisotropy, their stability has been hampered by significant crystal deterioration upon exposure to oxygen and water. Herein, we investigate the chemical stability of MoS2-passivated black phosphorus (BP) or bilayer (2L) phosphorene van der Waals (vdW) heterostructures using the field-effect transistor (FET) and phototransistor effects, measuring the persistence of conductivity and carrier mobility upon atmospheric exposure. Four thicknesses of MoS2-passivated BP FETs were studied at 1.5 (assigned to bilayer), 5, 13, and 20 nm to elucidate the effects of the MoS2 passivation layer on the device stability and electrical characteristics under dark and illumination (wavelength, λ  =  600 nm) conditions. We find that trilayer MoS2 passivation enhances the photoresponse of a 2L-phosphorene optoelectronic heterojunction by 78% without gate bias. When in contact with a trilayer MoS2 layer, the photoluminescence quantum yield of the phosphorene bilayer crystal apparently decreases 29%. This can be attributed to the difference in absorption in the BP layer induced by the interference color effect generated by the presence of the thin MoS2 layer as well as a built-in electric field that forms at the BP-MoS2 p-n interface helps to dissociate photo-generated electron-hole pairs, thereby reducing the probability of the recombination events. The effectiveness of a trilayer MoS2 as a vdW protection layer is tested by exposing BP-MoS2 vdW vertical heterostructures to the ambient environment for up to 3 weeks as well as annealing at high temperature (350 °C) in an inert Ar environment. We find that the MoS2 passivation layer reduces the dark current of bilayer phosphorene, but this effect decreases with thickness. Thus, we find that 2D MoS2 thin passivation layers provide specific chemical stability and electro-optical enhancement for transparent

  18. Study of tape casting of Yttria stabilized zirconia for apply in solid oxide fuel cell

    International Nuclear Information System (INIS)

    Santana, Leonardo de Paulo

    2008-01-01

    The hydrogen economy has been risen as new option for supply the growing global demand for energy. A fuel cell is an electrochemical device able to use hydrogen as a energy source. Carbon dioxide (CO 2 ) emission is very low so it is ecologically friendly, once energy is produced by a reaction of hydrogen and oxygen. The production of energy from hydrogen fuelled devices can be done even in small unities and in a distributed way. It can bring energy for isolated communities, where traditional energy distribution systems can not be reached. A fuel cell is composed essentially of 3 components: anode, cathode and the electrolyte. In present days, there are many materials proposed for use as electrolyte in fuel cells. Among then, Yttria stabilized zirconia (YSZ) is the most studied and effectively used in solid oxide fuel cell. Tape casting technology is a cheap, simple and efficient way to cast ceramics slurries in laminates thick enough to be used as components for fuel cells. Considering theses aspects, in this work, ceramic thin film forming was studied using tape casting technology with raw materials prepared from Brazilian zircon ores. It is described in literature that ceramic slurries are generally made from powders with low surface area (often between 0,5 to 10m 2 /g), and the powders used in this study had larger surface area (often between 40 to 80m 2 /g). The use of zeta potential is indicated to study the stability of a suspension of ceramic powders. However, for suspensions with large concentration of solid, it is also necessary to determine the flow curve, because in these conditions, the double electric layer formed during the stabilization of suspensions can be compressed. In the rheological properties study, calcined ceramic powders were classified using a set of ABNT series screens and separated and retained by the de mesh 60 screen. Flow curve of suspension was determined in aqueous suspensions of these powders. For tape casting processing, a binder

  19. Stability Studies of Certain Chemotherapeutic Agents Following Gamma Irradiation and Silver Nanoparticles Conjugation

    International Nuclear Information System (INIS)

    El-Sayyad, Gh.E.S.M.

    2014-01-01

    The Chemical stability of drug is of great importance since it becomes less effective as it undergoes degradation in case of applied of gamma irradiation process. The application of gamma irradiation for different chemotherapeutic agents Such as (ofloxacin, sodium ampicillin, sodium cefotaxime, gentamycin and amoxicillin) and studying the effect of applied doses on chemical structure and biological activity of the irradiated antibiotics compared to unirradiated ones was studied by ultraviolet-Visible spectrophotometer (UV-Visible), Fourier transform infrared spectroscopy measurements (FTIR spectra) and high performance liquid chromatography (HPLC) in addition to microbiological assay were run before and after irradiation to probe any change after irradiation. The results showed that all of the irradiated compounds remain stable and radio resistant; retaining their structure and activity unchanged up to 25 KGy. The radiation-induced AgNPs synthesis is a simple, clean which involves radiolysis of aqueous solution that provides an efficient method to reduce metal ions. Also, in this study, Bacillus megaterium was found to be an effective biological tool for the extracellular biosynthesis of stable AgNPs which are highly stable and this method has advantages over other methods as the organism used here is safe. This study would therefore lead to an easy procedure for producing silver nanoparticles with the added advantage of bio safety. The Synthesized AgNPs exhibit remarkable antimicrobial activity against both Gram-positive and Gram negative bacterial strains regardless of their drug-resistant mechanisms. The bactericidal activity have proved that AgNPs kill bacteria at such low concentrations (units of ppm), which Stability Studies of Certain Chemotherapeutic Agents Following Gamma Irradiation and Silver Nanoparticles Conjugation. do not reveal acute toxic effects on human cell, in addition to overcoming resistance, and lowering cost when compared to conventional

  20. Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure

    Energy Technology Data Exchange (ETDEWEB)

    Morent, Rino, E-mail: Rino.Morent@Ugent.be [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); De Geyter, Nathalie [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Trentesaux, Martine; Gengembre, Leon [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France); Dubruel, Peter [Department of Organic Chemistry, Polymer Chemistry and Biomaterials Research Group, Faculty of Sciences, Ghent University, Krijgslaan 281, 9000 Ghent (Belgium); Leys, Christophe [Department of Applied Physics, Research Unit Plasma Technology, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Payen, Edmond [Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, Universite des Sciences et Technologies de Lille, Bat. C3, Cite Scientifique, 59655 Villeneuve d' Ascq (France)

    2010-11-01

    Plasma polymerization of acrylic acid has become an interesting research subject, since these coatings are expected to be beneficial for biomedical applications due to their high surface density of carboxylic acid functional groups. However, the application of these monomers is counteracted by their low stability in humid environments, since a high stability is a required characteristic for almost any biological application. The present work investigates whether it is possible to obtain stable deposits with a high retention of carboxylic acid functions by performing plasma polymerization on polypropylene substrates with a dielectric barrier discharge operating at medium pressure. In order to obtain coatings with the desired properties, the plasma parameters need to be optimized. Therefore, in this paper, the influence of discharge power and location of the substrate in the discharge chamber is examined in detail. The properties of the deposited films are studied using contact angle measurements, X-ray photoelectron spectroscopy, atomic force microscopy and Fourier transform infrared spectroscopy. Moreover, to determine whether the obtained deposits are soluble in water, the coatings are once again analyzed after rinsing in water. This paper will clearly show that stable COOH-rich surfaces can be obtained at high discharge power and close to the monomer inlet, which might open perspectives for future biomedical applications.

  1. Proportional Retarded Controller to Stabilize Underactuated Systems with Measurement Delays: Furuta Pendulum Case Study

    Directory of Open Access Journals (Sweden)

    T. Ortega-Montiel

    2017-01-01

    Full Text Available The design and tuning of a simple feedback strategy with delay to stabilize a class of underactuated mechanical systems with dead time are presented. A linear time-invariant (LTI model with time delay of fourth order and a Proportional Retarded (PR controller are considered. The PR controller is shown as an appealing alternative to the application of observer-based controllers. This paper gives a step forward to obtain a better understanding of the effect of output delays and related phenomena in mechatronic systems, making it possible to design resilient control laws under the presence of uncertain time delays in measurements and obtain an acceptable performance without using a derivative action. The Furuta pendulum is a standard two-degrees-of-freedom benchmark example from the class of underactuated mechanical systems. The configuration under study includes an inherent output delay due to wireless communication used to transmit measurements of the pendulum’s angular position. Our approach offers a constructive design and a procedure based on a combination of root loci and Mikhailov methods for the analysis of stability. Experiments over a laboratory platform are reported and a comparison with a standard linear state feedback control law shows the advantages of the proposed scheme.

  2. Development and validation of a thin-layer chromatography method for stability studies of naproxen

    International Nuclear Information System (INIS)

    Rodriguez Hernandez, Yaslenis; Suarez Perez, Yania; Garcia Pulpeiro, Oscar; Rodriguez Borges, Tania

    2011-01-01

    The validation of an analytical method was carried out to be applied to the stability studies of the future formulations of naproxen suppositories for infant and adult use. The factors which mostly influenced in the naproxen stability were determined, the major degradation occurred in oxidizing acid medium and by action of light. The possible formation of esters between the free carboxyl group present in naproxen and the glyceryl monoestereate present in the base was identified as one of the degradation paths in the new formulation. The results were satisfactory. A thin-layer chromatography-based method was developed as well as the best chromatographic conditions were selected. GF 254 silica gel plates and ultraviolet developer at 254 nm were employed. Three solvent systems were evaluated of which A made up of glacial acetic: tetrahydrofurane:toluene (3:9:90 v/v/v)allowed adequate resolution between the analyte and the possible degradation products, with detection limit of 1 μg. The use of the suggested method was restricted to the identification of possible degradation products just for qualitative purposes and not as final test. The method proved to be sensitive and selective enough to be applied for the stated objective, according to the validation results

  3. A Study on stabilization of energy supply and demand using foreign futures market

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Won Chul; Lee, Sung Keun [Korea Energy Economics Institute, Euiwang (Korea)

    1999-02-01

    This study seeks to minimize financial cost related to the price stabilization and the supply and demand stabilization. In order to accomplish this, it derives a theoretical model of supply hedging to minimize fluctuation risk of price and financial cost intended for crude oil and LNG. Through the positive analysis based on this, it analyzes quantitatively the economic effect of utilizing foreign futures market. It shows the decline of average and divergence of supply cost. Despite the economic effect of utilizing a futures market, the degree of utilizing energy futures market of related firms in Korea appeared to be insufficient. To raise the utilization of trading in futures, the followings were suggested. Firstly, cost reduction and sharing relating information can be designed through the joint participation among allied enterprises. Secondly, energy futures transaction center in Korea can be established or trading linkage based on the existing international trading system can be built. Thirdly, it is possible to subsidize related cost by making a loan from trading in futures. Lastly, the participating directly in a futures market at government level can be considered. (author). 61 refs., 57 figs., 22 tabs.

  4. Estimating the wake deflection downstream of a wind turbine in different atmospheric stabilities: an LES study

    Directory of Open Access Journals (Sweden)

    L. Vollmer

    2016-09-01

    Full Text Available An intentional yaw misalignment of wind turbines is currently discussed as one possibility to increase the overall energy yield of wind farms. The idea behind this control is to decrease wake losses of downstream turbines by altering the wake trajectory of the controlled upwind turbines. For an application of such an operational control, precise knowledge about the inflow wind conditions, the magnitude of wake deflection by a yawed turbine and the propagation of the wake is crucial. The dependency of the wake deflection on the ambient wind conditions as well as the uncertainty of its trajectory are not sufficiently covered in current wind farm control models. In this study we analyze multiple sources that contribute to the uncertainty of the estimation of the wake deflection downstream of yawed wind turbines in different ambient wind conditions. We find that the wake shapes and the magnitude of deflection differ in the three evaluated atmospheric boundary layers of neutral, stable and unstable thermal stability. Uncertainty in the wake deflection estimation increases for smaller temporal averaging intervals. We also consider the choice of the method to define the wake center as a source of uncertainty as it modifies the result. The variance of the wake deflection estimation increases with decreasing atmospheric stability. Control of the wake position in a highly convective environment is therefore not recommended.

  5. Preformulation stability study of the EGFR inhibitor HKI-272 (Neratinib) and mechanism of degradation.

    Science.gov (United States)

    Lu, Qinghong; Ku, Mannching Sherry

    2012-03-01

    The stability in solution of HKI-272 (Neratinib) was studied as a function of pH. The drug is most stable from pH 3 to 4, and degradation rate increases rapidly around pH 6 and appears to approach a maximum asymptotic limit in the range of pH 812. Pseudo first-order reaction kinetics was observed at all pH values. The structure of the major degradation product indicates that it is formed by a cascade of reactions within the dimethylamino crotonamide group of HKI-272. It is assumed that the rate-determining step is the initial isomerization from allyl amine to enamine functionality, followed by hydrolysis and subsequent cyclization to a stable lactam. The maximum change in degradation rate as a function of pH occurs at about pH 6, which corresponds closely to the theoretical pKa value of the dimethylamino group of HKI-272 when accounting for solvent/temperature effects. The observed relationship between pH and degradation rate is discussed, and a self-catalyzed mechanism for the allylamine-enamine isomerization reaction is proposed. The relevance of these findings to other allylamine drugs is discussed in terms of the relative stability of the allylic anion intermediate through which, the isomerization occurs.

  6. A Parametric Study on Using Active Debris Removal to Stabilize the Future LEO Debris Environment

    Science.gov (United States)

    Liou, J.C.

    2010-01-01

    Recent analyses of the instability of the orbital debris population in the low Earth orbit (LEO) region and the collision between Iridium 33 and Cosmos 2251 have reignited the interest in using active debris removal (ADR) to remediate the environment. There are; however, monumental technical, resources, operational, legal, and political challenges in making economically viable ADR a reality. Before a consensus on the need for ADR can be reached, a careful analysis of the effectiveness of ADR must be conducted. The goal is to demonstrate the feasibility of using ADR to preserve the future environment and to guide its implementation to maximize the benefit-cost ratio. This paper describes a comprehensive sensitivity study on using ADR to stabilize the future LEO debris environment. The NASA long-term, orbital debris evolutionary model, LEGEND, is used to quantify the effects of many key parameters. These parameters include (1) the starting epoch of ADR implementation, (2) various target selection criteria, (3) the benefits of collision avoidance maneuvers, (4) the consequence of targeting specific inclination or altitude regimes, (5) the consequence of targeting specific classes of vehicles, and (6) the timescale of removal. Additional analyses on the importance of postmission disposal and how future launches might affect the requirements to stabilize the environment are also included.

  7. Coping strategies: a prospective study of patterns, stability, and relationships with psychological distress.

    Science.gov (United States)

    Nielsen, Morten B; Knardahl, Stein

    2014-04-01

    The aims of this article are: (1) to explore patterns (clusters) of coping strategies; (2) to examine the stability of individual coping strategies and patterns of coping over time; and (3) to establish long term associations between coping and psychological distress. Coping strategies were assessed with the Brief Cope questionnaire, whereas psychological distress was measured with the ten-item version of the Hopkins Symptom Checklist, in a two-year prospective sample comprising 3,738 employees. Based on TwoStep cluster analysis of the Brief Cope, three different coping patterns were identified: low coping, engagement coping, and disengagement coping. Analyses of long-term stability indicated malleable properties for the individual coping strategies as well as the three clusters. Disengagement coping strategies in the form of self-blame and self-distraction were most strongly associated with distress at follow-up, whereas baseline distress was related to increased use of these strategies two years later. Coping patterns at baseline had no main effects on later levels of distress, but levels of distress at baseline predicted subsequent use of engagement and disengagement coping patterns. The finding that specific coping strategies are malleable suggests that it is possible to modify and develop dysfunctional strategies. The associations between disengagement coping strategies and distress indicate that this kind of coping is especially problematic with regard to mental health problems. A main contribution of this study is that it establishes cluster analytic techniques as beneficial in the assessment of coping.

  8. Real-time Leishmania genus master mix: a platform compatibility and stability study.

    Science.gov (United States)

    Melanson, Vanessa R; Scheirer, Jessica L; Kalina, Warren V; Wagar, Eric J

    2014-10-01

    Performing diagnostics and vector-pathogen surveillance in austere environments is challenging. On-site diagnostic/detection mitigates vector-borne disease complications during military or humanitarian deployments to disease endemic locals. The mobile molecular diagnostic platform, Joint Biological Agent Identification and Diagnostic System (JBAIDS; BioFire Diagnostics Inc., Salt Lake City, UT, USA), rapidly identifies biothreat pathogens. Although ideal for remote diagnostics, the platform was validated for specific pathogens of insignificant epidemiological consequence. Recognizing the JBAIDS's remote diagnostic/detection versatility, we tested a Leishmania genus real-time PCR master mix validated for use on the SmartCycler® (Cepheid, Sunnyvale, CA, USA) for concomitant use on the JBAIDS. We evaluated assay sensitivity, precision, and specificity of one or more Leishmania spp. on the JBAIDS and found that the JBAIDS produces superior detection sensitivity and specificity compared to the SmartCycler®. We also examined the storage stability of a bulk lot preparation of the Leishmania genus real-time PCR master mix on the SmartCycler® to ensure that long periods of frozen storage that would translate to a field environment with the JBAIDS were not detrimental to the reagent. We found that the bulk master mix maintains its stability over a 13-month time period. Overall, these studies confirm JBAIDS's versatility and demonstrate a streamlined assay development approach where reagents are compatible with both platforms. Copyright © 2014. Published by Elsevier Inc.

  9. First-principles study of interstitial hydrogen in yttria-stabilized zirconia.

    Science.gov (United States)

    Marinopoulos, Apostolos

    2012-02-01

    Hydrogen is a common impurity in oxides and has been known to exhibit a dual behavior: either by being a dopant or alternatively an amphoteric impurity with the transition (pinning) level, E(+/-), lying inside the gap [1]. By means of calculations based on density-functional theory (DFT) and a hybrid-functional scheme (Heyd-Scuseria-Ernzerhof) we have studied the incorporation of hydrogen in yttria-stabilized zirconia. Equilibrium sites and formation energies were determined and the role of intrinsic oxygen vacancies needed to stabilize the cubic phase of the oxide was particularly examined. Whereas, in its positively-charged state, H^+, hydrogen was found exclusively to form a dative-type bond with O ions, the neutral paramagnetic H^0 displayed a coexistence with deep interstitial configurations with minimal lattice relaxation of the host lattice. A number of atomic-level mechanisms and migration paths were explored in order to understand this site interplay and the dynamics of neutral H^0 in a way that is consistent with the existing experimental data. [1] C.G. Van de Walle and J. Neugebauer, Nature 423, 626 (2003).

  10. Sleep stabilizes visuomotor adaptation memory: a functional magnetic resonance imaging study.

    Science.gov (United States)

    Albouy, Genevieve; Vandewalle, Gilles; Sterpenich, Virginie; Rauchs, Geraldine; Desseilles, Martin; Balteau, Evelyne; Degueldre, Christian; Phillips, Christophe; Luxen, Andre; Maquet, Pierre

    2013-04-01

    The beneficial effect of sleep on motor memory consolidation is well known for motor sequence memory, but remains unsettled for visuomotor adaptation in humans. The aim of this study was to characterize more clearly the influence of sleep on consolidation of visuomotor adaptation using a between-subjects functional magnetic resonance imaging (fMRI) design contrasting sleep to total sleep deprivation. Our behavioural results, based on seven different parameters, show that sleep stabilizes performance whereas sleep deprivation deteriorates it. During training, while a set of cerebellar, striatal and cortical areas is activated in proportion to performance improvement, the recruitment of the hippocampus and frontal cortex protects motor memory against the detrimental effects of sleep deprivation. During retest after sleep loss a cerebello-cortical network, usually involved in the earliest stage of learning, was recruited to perform the task. In contrast, no changes in cerebral activity were observed after sleep, suggesting that it may only support the stabilization of the visuomotor adaptation memory trace. © 2012 European Sleep Research Society.

  11. Stability of avocado oil during heating: comparative study to olive oil.

    Science.gov (United States)

    Berasategi, Izaskun; Barriuso, Blanca; Ansorena, Diana; Astiasarán, Iciar

    2012-05-01

    The stability of the saponifiable and unsaponifiable fractions of avocado oil, under a drastic heating treatment, was studied and compared to that of olive oil. Avocado and olive oil were characterised and compared at time 0h and after different times of heating process (180°C). PUFA/SFA (0.61 at t=0) and ω-6/ω-3 (14.05 at t=0) were higher in avocado oil than in olive oil during the whole experiment. Avocado oil was richer than olive oil in total phytosterols at time 0h (339.64; 228.27mg/100g) and at 9h (270.44; 210.30mg/100g) of heating. TBARs was higher in olive oil after 3h, reaching the maximum values in both oils at 6h of heating treatment. Vitamin E was higher in olive oil (35.52 vs. 24.5mg/100g) and it disappeared earlier in avocado oil (at 4 vs. 5h). The stability of avocado oil was similar to that of olive oil. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Time resolved studies of H{sub 2}{sup +} dissociation with phase-stabilized laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Bettina

    2010-06-23

    In the course of this thesis, experimental studies on the dissociation of H{sub 2}{sup +}(H{sub 2}{sup +}{yields}p+H) in ultrashort laser pulses with a stabilized carrier-envelope phase (CEP) were carried out. In single-pulse measurements, the ability to control the emission direction of low energetic protons, i.e. the localization of the bound electron at one of the nuclei after dissociation, by the CEP was demonstrated. The coincident detection of the emitted protons and electrons and the measurement of their three-dimensional momentum vectors with a reaction microscope allowed to clarify the localization mechanism. Further control was achieved by a pump-control scheme with two timedelayed CEP-stabilized laser pulses. Here the neutral H{sub 2} molecule was ionized in the first pulse and dissociation was induced by the second pulse. Electron localization was shown to depend on the properties of the bound nuclear wave packet in H{sub 2}{sup +} at the time the control pulse is applied, demonstrating the ability to use the shape and dynamics of the nuclear wave packet as control parameters. Wave packet simulations were performed reproducing qualitatively the experimental results of the single and the two-pulse measurements. For both control schemes, intuitive models are presented, which qualitatively explain the main features of the obtained results. (orig.)

  13. Microstructural and impedance study of nanocrystalline lanthana-doped scandia-stabilized zirconia

    Science.gov (United States)

    Pastor, M.; Prasad, A.; Biswas, K.; Pandey, A. C.; Manna, I.

    2012-08-01

    Lanthana-doped (0-4 mol%) scandia-stabilized zirconia was synthesized by chemical co-precipitation from an aqueous solution of appropriate salts. Microstructural characterization, phase identification, and conductivities were determined by X-ray diffraction (XRD), scanning (SEM), transmission electron microscopy (TEM), and complex impedance analysis. The crystallite size of the as-precipitated compound, determined from XRD peak broadening and verified by TEM, varied between 20 and 30 nm. SEM studies revealed that the sintered microstructure was dense and uniform. Complex impedance analysis allowed determination of frequency and temperature dependence of both alternating (AC) and direct current (DC) conductivities of the material. The results indicated a gradual decrease in impedance of both grain and grain boundary with increase in lanthana doping. Temperature dependence studies of both AC and DC conductivities shows that the maximum conductivity is obtained in 3 mol% lanthana-doped compound, which incidentally records the highest density, too.

  14. Validation of an analytical method for quality control and stability study of 10 % Phenylephrine eyedrops

    International Nuclear Information System (INIS)

    Monteagudo Licea, Raiza; Garcia Penna, Caridad Margarita; Botet Garcia, Martha

    2010-01-01

    Phenylephrine is used like mydiatric in eye examinations and other ophthalmic procedures. It is used as vasoconstrictor with local anesthetic agents. In present paper a high resolution liquid chromatography analytical method was validated to quality control and stability studies of 10 % Phenylephrine (eyedrops). Method was based in separation of active principle through a Lichrosorb RO-18 (5 μm) (250 x 4 mm) chromatography column with UV detection at 280 nm using a mobile phase composed by a non-gasified mixture of methanol distilled water (1:1) with 1.1 g of 1-sodium octane-sulphonate by liter adjusted to pH 3,0 with phosphoric acid at a flow speed of 1.0 mL/min. Analytical method was linear, accuracy, specific and exact in the interval of study concentrations

  15. Numerical study of turbulent normal diffusion flame CH4-air stabilized by coaxial burner

    Directory of Open Access Journals (Sweden)

    Riahi Zouhair

    2013-01-01

    Full Text Available The practical combustion systems such as combustion furnaces, gas turbine, engines, etc. employ non-premixed combustion due to its better flame stability, safety, and wide operating range as compared to premixed combustion. The present numerical study characterizes the turbulent flame of methane-air in a coaxial burner in order to determine the effect of airflow on the distribution of temperature, on gas consumption and on the emission of NOx. The results in this study are obtained by simulation on FLUENT code. The results demonstrate the influence of different parameters on the flame structure, temperature distribution and gas emissions, such as turbulence, fuel jet velocity, air jet velocity, equivalence ratio and mixture fraction. The lift-off height for a fixed fuel jet velocity is observed to increase monotonically with air jet velocity. Temperature and NOx emission decrease of important values with the equivalence ratio, it is maximum about the unity.

  16. Analytical method validation for quality control and the study of the 50 mg Propylthiouracil stability

    International Nuclear Information System (INIS)

    Valdes Bendoyro, Maria Olga; Garcia Penna, Caridad Margarita; Fernandez, Juan Lugones; Garcia Borges, Lisandra; Martinez Espinosa, Vivian

    2010-01-01

    A high-performance liquid chromatography analytical method was developed and validated for the quality control and stability studies of 50 mg Propylthiouracil tablets. Method is based in active principle separation through a 100 RP-18 RP-18 (5 μm) (250 x 4 mm) Lichrospher chromatography with UV detection to 272 nm, using a mobile phase composed by a ungaseous mixture of a 0.025 M buffer solution-monobasic potassium phosphate to pH= 4,6 ad acetonitrile in a 80:20 ratio with a flux speed of 0,5 mL/min. Analytical method was linear, precise, specific and exact in the study concentrations interval

  17. Study of Stoichiometry and Stability of some Fe(III)-Amino Acid Complexes

    International Nuclear Information System (INIS)

    Latif, S.; Shirin, K.; Nisar, S.; Zahida, T. M.

    2005-01-01

    The complexation of ferric with three amino acids (Glycine, Glutamic acid and Aspartic acid) was studied spectrophotometrically and potentiometrically at pH 5.0 and in aqueous medium. The stoichiometry was calculated spectrophotometrically using mole ratio method and is found to be ML3 for Fe (III)-Glycine and ML2 for Fe (III)-Glutamate for Fe (III)-Glutamate and Aspartate complex. The stabilities of these complexes were calculated spectrophotometrically and potentiometrically. The experimental results of potentiometric titrations were treated by well known computer program B EST . The values were further refined till least sigma fit i.e. 0.03. The complexes were not formed under normal conditions. Each complex was studied at more than one wavelength and no kmax was obtained because Fe (III) solution and the complexes absorb in similar wavelength region. The formation constants of all these complexes are not very high shows weak complexation of Fe (III) with these amino acids. (author)

  18. Experimental and numerical study of a premixed flame stabilized by a rectangular section cylinder

    Energy Technology Data Exchange (ETDEWEB)

    Bailly, P.; Garreton, D. [Electricite de France (EDF), 92 - Clamart (France); Bruel, P.; Champion, M. et al. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France)

    1996-12-31

    A numerical and experimental study of a turbulent reactive zone stabilized by a rectangular cross-section cylinder positioned in a fully developed turbulent channel flow of a propane-air mixture is presented. Such a flow geometry has been chosen because it features most of the phenomena (recirculation zones, flame stabilization, wall-flame interactions) present in systems of practical interest. The flow is experimentally investigated with a 2-D laser Doppler velocimeter and thin compensated thermocouples. The modelling of the reactive flow is based on a modified Bray-Moss-Libby combustion model associated with a Reynolds-Stress turbulence model. The resulting set of equations is solved by a finite difference Navier-Stokes code on a rectilinear mesh. The comparison between numerical nd experimental results shows that the use of a full second-order model with dedicated equations for both the Reynolds stresses and the scalar turbulent flux does not lead to a significant improvement of the numerical results. Indeed, although the longitudinal scalar turbulent flux exhibits a non-gradient behaviour, the evolution of the mean progress variable introduced by the Bray-Moss-Libby model appears to be mainly controlled by the transverse scalar gradient which follows in all cases a gradient like behaviour. Additional measurements and calculations are required to precise the exact range of mass flow rate, equivalence ratio and obstacle bluffness over which such a tendency can be observed. Nevertheless, the tentative conclusion of this study is that, as soon as a refinement of the modelling of reactive flows in combustors which involve flameholders similar to the one investigated in this study is needed, the use of a Reynolds-Stress model should be the first necessary step. Then, depending on the exact nature of the flow geometry, a second phase should consist in evaluating the need for the use of a full second order model like the one presented in this study. (authors) 25 refs.

  19. Study of root tensile strength of softwood and hardwood tree species: Implications for slope stability

    Science.gov (United States)

    Esmaiili, Marzieh; Abdi, Ehsan; Jafary, Mohammad; Majnounian, Baris

    2017-04-01

    Landslides are known as one of the major natural hazards and often incurring economics and human life losses. The role of tree roots in slope stability is very important, especially when human lives and infrastructure are at risk. The anchorage of roots and improvement of slope stability mainly depend on specific properties of root network systems, such as tensile strength. These properties of the roots which govern the degree of reinforcement are different among tree species. Although, many studies have been conducted about plant biotechnical properties of species, yet there is lack of knowledge on comparing root systems of softwood and hardwood tree species for similar site conditions. Therefore this study was conducted to assess the tensile strength of the root system of Picea abies (softwood species) and Fraxinus excelsior (hardwood species) planted on two forested hillslopes. To this aim, single root specimens were sampled for each species and their tensile strength were then measured in laboratory using a computer controlled Instron Universal Testing Machine. According to the results root tensile strength tends to decrease with diameter according to a power law for both species. Based on analysis of covariance (ANCOVA), a significant difference has been observed in the tensile strength between the two studied species. Also the results showed that the value of mean root tensile strength for Picea abies (19.31 ± 2.64 MPa) was much more than that of Fraxinus excelsior (16.98 ± 1.01 MPa) within all root diameter classes. The data presented in this study may expand the knowledge of biotechnical properties of Picea abies and Fraxinus excelsior, as biomaterial for soil bioengineering.

  20. Study of static and dynamic stability of flexible rods in a geometrically nonlinear statement

    Science.gov (United States)

    Annin, B. D.; Vlasov, A. Yu.; Zakharov, Yu. V.; Okhotkin, K. G.

    2017-07-01

    We study static and dynamic stability problems for a thin flexible rod subjected to axial compression with the geometric nonlinearity explicitly taken into account. In the case of static action of a force, the critical load and the bending shapes of the rod were determined by Euler. Lavrent'ev and Ishlinsky discovered that, in the case of rod dynamic loading significantly greater than the Euler static critical load, there arise buckling modes with a large number of waves in the longitudinal direction. Lavrent'ev and Ishlinsky referred to the first loading threshold discovered by Euler as the static threshold, and the subsequent ones were called dynamic thresholds; they can be attained under impact loading if the pulse growth time is less than the system relaxation time. Later, the buckling mechanism in this case and the arising parametric resonance were studied in detail by Academician Morozov and his colleagues. In this paper, we complete and develop the approach to studying dynamic rod systems suggested by Morozov; in particular, we construct exact and approximate analytic solutions by using a system of special functions generalizing the Jacobi elliptic functions. We obtain approximate analytic solutions of the nonlinear dynamic problem of flexible rod deformation under longitudinal loading with regard to the boundary conditions and show that the analytic solution of static rod system stability problems in a geometrically nonlinear statement permits exactly determining all possible shapes of the bent rod and the complete system of buckling thresholds. The study of approximate analytic solutions of dynamic problems of nonlinear vibrations of rod systems loaded by lumped forces after buckling in the deformed state allows one to determine the vibration frequencies and then the parametric resonance thresholds.

  1. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000 h

    DEFF Research Database (Denmark)

    Gevorgyan, Suren; Madsen, Morten Vesterager; Dam, Henrik Friis

    2013-01-01

    This work attempts to reveal the comparability issues related to outdoor testing procedures of organic photovoltaic (OPV) modules via studies of inter-laboratory long-term outdoor measurements of roll-to-roll coated flexible OPV modules (P3HT:PCBM, inverted architecture) in different geographic...... and measurement setups on the comparability of test results are analyzed. A strong link between the device temperature and performance is revealed, which is ascribed to the reaction of PEDOT:PSS layer with water. The estimation of the true performance of the modules by accommodation of variations in testing...

  2. Euclidean distance and Kolmogorov-Smirnov analyses of multi-day auditory event-related potentials: a longitudinal stability study

    International Nuclear Information System (INIS)

    Durato, M V; Nawang, S A; Albano, A M; Rapp, P E

    2015-01-01

    The validity of ERPs as indices of stable neurophysiological traits is partially dependent on their stability over time. Previous studies on ERP stability, however, have reported diverse stability estimates despite using the same component scoring methods. This present study explores a novel approach in investigating the longitudinal stability of average ERPs—that is, by treating the ERP waveform as a time series and then applying Euclidean Distance and Kolmogorov-Smirnov analyses to evaluate the similarity or dissimilarity between the ERP time series of different sessions or run pairs. Nonlinear dynamical analysis show that in the absence of a change in medical condition, the average ERPs of healthy human adults are highly longitudinally stable—as evaluated by both the Euclidean distance and the Kolmogorov-Smirnov test. (paper)

  3. Neurologic Music Therapy Training for Mobility and Stability Rehabilitation with Parkinson's Disease - A Pilot Study.

    Science.gov (United States)

    Bukowska, Anna A; Krężałek, Piotr; Mirek, Elżbieta; Bujas, Przemysław; Marchewka, Anna

    2015-01-01

    Idiopathic Parkinson's Disease (PD) is a progressive condition with gait disturbance and balance disorder as the main symptoms. Previous research studies focused on the application of Rhythmic Auditory Stimulation (RAS) in PD gait rehabilitation. The key hypothesis of this pilot study, however, assumes the major role of the combination of all three Neurologic Music Therapy (NMT) sensorimotor techniques in improving spatio-temporal gait parameters, and postural stability in the course of PD. The 55 PD-diagnosed subjects invited to the study were divided into two groups: 30 in the experimental and 25 in the control group. Inclusion criteria included Hoehn and Yahr stages 2 or 3, the ability to walk independently without any aid and stable pharmacological treatment for the duration of the experiment. In order to evaluate the efficacy of the chosen therapy procedure the following measures were applied: Optoelectrical 3D Movement Analysis, System BTS Smart for gait, and Computerized Dynamic Posturography CQ Stab for stability and balance. All measures were conducted both before and after the therapy cycle. The subjects from the experimental group attended music therapy sessions four times a week for 4 weeks. Therapeutic Instrumental Music Performance (TIMP), Pattern Sensory Enhancement (PSE) and RAS were used in every 45-min session for practicing daily life activities, balance, pre-gait, and gait pattern. Percussion instruments, the metronome and rhythmic music were the basis for each session. The subjects from the control group were asked to stay active and perform daily life activities between the measures. The research showed that the combination of the three NMT sensorimotor techniques can be used to improve gait and other rhythmical activities in PD rehabilitation. The results demonstrated significant improvement in the majority of the spatiotemporal gait parameters in the experimental group in comparison to the control group. In the stability tests with eyes

  4. A stability-study of expired ampoules manufactured more than 40 years ago.

    Science.gov (United States)

    Zilker, Markus; Sörgel, Fritz; Holzgrabe, Ulrike

    2018-02-20

    Pharmaceutical manufacturers have to study the stability of drug products before marketing according to ICH guideline Q1A(R2); data of those investigations aim to set expiry dates. The expiry date on the container of a remedy assures the physician and the patient a stability of the drug in its formulation i.e. within a specification of 95-105%. Only few studies show that shelf-lives of pharmaceutical products are often longer than expiration dates. The objective of the study presented here was determining the content of nine expired ampoules manufactured in the last century and identifying the impurity profile by means of HPLC-UV and HPLC-MS, respectively. The ampoules are part of the "PEAK-collection" of long expired finished pharmaceutical products at IBMP, Nürnberg-Heroldsberg, and consists among others of epinephrine (Suprarenin and Adrenalin in Oil), etilefrine (Effortil ® ), synephrine (Sympatol ® ), caffeine and procaine (Impletol), caffeine and sodium salicylate (Caffeinum Salicylicum), dipyridamole (Persantin ® ), furosemide (Lasix ® ), and metamizole (Novalgin ® ). For chromatographic investigations methods of the European Pharmacopoeia for related substances were used; for determining the content, they were validated for linearity, precision, and accuracy. The results were compared to current reference ampoules. Five out of nine ampoules were still within the specified content limits. In Suprarenin and Adrenalin in Oil, both containing epinephrine, Impletol (procaine), and Persantin ® (dipyridamole) contents were decreased to 70%, 74%, 79%, and 86%, respectively, and therefore out of specification. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Separation and study of nuclides far from beta stability and search for new regimes of nuclear stability

    International Nuclear Information System (INIS)

    Skarestad, M.

    1977-01-01

    In radiochemical separations progress has been made in developing both discontinuous and continuous separation techniques. Outstanding examples of fast, discontinuous separations have been reported from the University of Mainz where chemical separations are performed on a subsecond time scale. However, when experiments have to be performed repeatedly, a continuous separation process delivering a steady source of short-lived species is more appropriate. Such separations are accomplished in the on-line operating solvent extraction system SISAK. The combination of this separation technique with a Gas Jet Recoil Transport (GJRT) system makes it possible to adapt the separation system to different irradiation facilities. The performance of SISAK has been illustrated through the study of short-lived rare-earth isotopes, using conventional gamma-ray spectroscopy. Following some initial test experiments at a 14 MeV neutron generator in Gothenburg the SISAK system was installed at a Philips PW 5320 neutron generator situated in the Dept. of Nuclear Chemistry, Univ. of Oslo in 1972. In the following two years the main effort was devoted to the development of the experimental separation technique although some physics results were obtained in this period. In 1974 the SISAK system was combined with a GJRT arrangement and installed at the Mainz TRIGA reactor. (JIW)

  6. Thermal Stability and Surface Wettability Studies of Polylactic Acid/Halloysite Nanotube Nanocomposite Scaffold for Tissue Engineering Studies

    Science.gov (United States)

    Nizar, M. Mohd; Hamzah, M. S. A.; Razak, S. I. Abd; Mat Nayan, N. H.

    2018-03-01

    This paper reports the preliminary study about the incorporation of halloysite nanotubes (HNT) into polylactic acid (PLA) scaffold to improve the thermal resistance and surface wettability properties. The fabrication of the porous scaffold requires a simple yet effective technique with low-cost materials within freeze extraction method. The thermal stability of PLA/HNT scaffold compared to neat PLA scaffold achieved with increased content of HNT by 5 wt%. Moreover, the surface wettability of the scaffold also shows a positive impact with high content of HNT by 5 wt%. This new nanocomposite scaffold may have high potential as a suitable template for tissue regeneration.

  7. Studies on Soil Cements: 1 - Role of Hydrated Lime and Dolomitic Monohydrate in Montmorillonite Stabilization

    OpenAIRE

    Abo El Enein, A. [صلاح عبد الغني ابو العينين

    1982-01-01

    Montmorillonite clay was stabilized by either hydrated lime or the dolomitic monohydrate (Ca(OH)2. MgO) during suspension hydration at 25 and 60°C for 45 days. The distinct phases produced from the hydration of each stabilized clay suspension were identified by means of X-ray diffraction analysis. The role of either Ca(OH)2 and/or MgO in soil stabilization could be clearly understood in order to extend the use of portland cement for the stabilization of montmorillonite to produce soil cements...

  8. Preparing for chemical terrorism: a study of the stability of expired pralidoxime (2-PAM).

    Science.gov (United States)

    Hoffman, Robert S; Mercurio-Zappala, Maria; Bouchard, Nicole; Ravikumar, Padinjarekuttu; Goldfrank, Lewis

    2012-03-01

    Oximes such as pralidoxime (2-PAM) are essential antidotes for life-threatening organophosphate poisoning. Unfortunately, oximes are expensive, have limited use, and have short shelf lives. As such, maintaining large stockpiles in preparation for terrorist activity is not always possible. We have demonstrated that atropine is stable well beyond its labeled shelf life and that recently expired 2-PAM was clinically efficacious in a series of poisoned patients. Because 2-PAM is often dosed empirically, clinical improvement does not guarantee pharmacological stability. We therefore chose to analyze the chemical stability of expired 2-PAM. Samples of lyophylized 2-PAM were maintained according to the manufacturer's recommendations for 20 years beyond the published shelf life. We studied 2-PAM contained in a MARK I autoinjector that was stored properly for 3 years beyond its expiration date. An Agilent LC/MSD 1100 with diode-array detector and an Agilent Sorbax SB-C-18, 4.6 × 150-mm, 5-μm column were used with the following solvent systems: water with 0.01% trifluoroacetic acid and methanol with 0.01% trifluoroacetic acid. Fresh reagent grade 2-PAM was used as a standard. Results were repeated for consistency. Lyophylized 2-PAM was a white powder that was clear and colorless in solution. Liquid chromatography was identical to the standard and resulted in 2 isolated peaks with identical mass spectra, suggesting that they are stereoisomers. The autoinjector discharged a clear, yellowish solution. In addition to the 2 peaks identified for lyophylized 2-PAM, a small third peak was identified with a mass spectra corresponding to the reported N -methyl pyridinium carboxaldehyde degradation product. When properly stored, lyophylized 2-PAM appears to be chemically stable well beyond its expiration date. Although the relative amount of degradation product found in solubilized (autoinjector) 2-PAM was small, it is unclear whether this may be toxic and therefore is of concern

  9. Six weeks of core stability training improves landing kinetics among female capoeira athletes: a pilot study.

    Science.gov (United States)

    Araujo, Simone; Cohen, Daniel; Hayes, Lawrence

    2015-03-29

    Core stability training (CST) has increased in popularity among athletes and the general fitness population despite limited evidence CST programmes alone lead to improved athletic performance. In female athletes, neuromuscular training combining balance training and trunk and hip/pelvis dominant CST is suggested to reduce injury risk, and specifically peak vertical ground reaction forces (vGRF) in a drop jump landing task. However, the isolated effect of trunk dominant core stability training on vGRF during landing in female athletes had not been evaluated. Therefore, the objective of this study was to evaluate landing kinetics during a drop jump test following a CST intervention in female capoeira athletes. After giving their informed written consent, sixteen female capoeira athletes (mean ± SD age, stature, and body mass of 27.3 ± 3.7 years, 165.0 ± 4.0 cm, and 59.7 ± 6.3 kg, respectively) volunteered to participate in the training program which consisted of static and dynamic CST sessions, three times per week for six weeks. The repeated measures T-test revealed participants significantly reduced relative vGRF from pre- to post-intervention for the first (3.40 ± 0.78 vs. 2.85 ± 0.52 N·NBW-1, respectively [p<0.05, effect size = 0.60]), and second landing phase (5.09 ± 1.17 vs. 3.02 ± 0.41 N·NBW-1, respectively [p<0.001, effect size = 0.87]). The average loading rate was reduced from pre- to post-intervention during the second landing phase (30.96 ± 18.84 vs. 12.06 ± 9.83 N·NBW·s-1, respectively [p<0.01, effect size = 0.68]). The peak loading rate was reduced from pre- to post-intervention during the first (220.26 ± 111.51 vs. 120.27 ± 64.57 N·NBW·s-1 respectively [p<0.01, effect size = 0.64]), and second (99.52 ± 54.98 vs. 44.71 ± 30.34 N·NBW·s-1 respectively [p<0.01, effect size = 0.70]) landing phase. Body weight, average loading rate during the first landing phase, and jump height were not significantly different between week 0 and week 6

  10. STUDY REGARDING THE ASSESSMENT OF THE FINANCIAL STABILITY OF THE ECONOMIC ENTITIES

    Directory of Open Access Journals (Sweden)

    N. Baltes

    2016-11-01

    Full Text Available The research presents both theoretical and practicalthe evolution of the financial stability assessed through the solvency indicators, the real economic growth rate and the GDP deflator in the manufacturing companies from Romania, through the Vector Autoregression Model (VAR. The sample consists in 36 companies belonging to the manufacturing industry in Romania, listed on the Bucharest Stock Exchange, on the first and second category. The study is conducted during the period 2007-2014 and demonstrated the fact that a change in the real economic growth causes a positive change in the GDP deflator. Not lastly, the change of the real economic growth also determines a positive change of the patrimonial solvency, and a change in the GDP deflator produces a reduction of the patrimonial solvency.

  11. Study of the stability of a SEIRS model for computer worm propagation

    Science.gov (United States)

    Hernández Guillén, J. D.; Martín del Rey, A.; Hernández Encinas, L.

    2017-08-01

    Nowadays, malware is the most important threat to information security. In this sense, several mathematical models to simulate malware spreading have appeared. They are compartmental models where the population of devices is classified into different compartments: susceptible, exposed, infectious, recovered, etc. The main goal of this work is to propose an improved SEIRS (Susceptible-Exposed-Infectious-Recovered-Susceptible) mathematical model to simulate computer worm propagation. It is a continuous model whose dynamic is ruled by means of a system of ordinary differential equations. It considers more realistic parameters related to the propagation; in fact, a modified incidence rate has been used. Moreover, the equilibrium points are computed and their local and global stability analyses are studied. From the explicit expression of the basic reproductive number, efficient control measures are also obtained.

  12. Functionalized Graphene Sheets As Immobilization Matrix for Fenugreek β-Amylase: Enzyme Kinetics and Stability Studies

    Science.gov (United States)

    Srivastava, Garima; Singh, Kritika; Talat, Mahe; Srivastava, Onkar Nath; Kayastha, Arvind M.

    2014-01-01

    β-Amylase finds application in food and pharmaceutical industries. Functionalized graphene sheets were customised as a matrix for covalent immobilization of Fenugreek β-amylase using glutaraldehyde as a cross-linker. The factors affecting the process were optimized using Response Surface Methodology based Box-Behnken design of experiment which resulted in 84% immobilization efficiency. Scanning and Transmission Electron Microscopy (SEM, TEM) and Fourier Tansform Infrared (FTIR) spectroscopy were employed for the purpose of characterization of attachment of enzyme on the graphene. The enzyme kinetic studies were carried out for obtaining best catalytic performance and enhanced reusability. Optimum temperature remained unchanged, whereas optimum pH showed shift towards acidic range for immobilized enzyme. Increase in thermal stability of immobilized enzyme and non-toxic nature of functionalized graphene can be exploited for production of maltose in food and pharmaceutical industries. PMID:25412079

  13. Studies on stabilities of some human chorionic gonadotropin complexes with {beta}-emitting radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Maiti, Moumita [Chemical Sciences Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India); Sen, Kamalika [Department of Chemistry, University of Calcutta, 92 APC Road, Kolkata 700009 (India); Sen, Souvik [Malda Town Divisional Railway Hospital, Malda 732102 (India); Lahiri, Susanta, E-mail: susanta.lahiri@saha.ac.i [Chemical Sciences Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

    2011-02-15

    Human chorionic gonadotropin (hCG) is a peptide hormone, whose one of the structural subunits is identical to that of thyroid-stimulating hormone (TSH). As a consequence, the receptors of TSH also act as receptor for hCG hormone. Keeping in mind this interesting property of hCG we have studied the complex formation ability of various no-carrier-added {beta}-emitting isotopes of {sup 61}Cu (3.3 h), {sup 62}Zn (9.2 h), {sup 90}Nb (14.60 h) and {sup 99}Mo (66.02 h) with hCG molecule. Stability of the hCG-M (M=metal ions) complexes was investigated by dialysis with respect to triple distilled water and ringer lactate solution, which has the same composition as extracellular fluid.

  14. Studies on stabilities of some human chorionic gonadotropin complexes with β-emitting radionuclides

    International Nuclear Information System (INIS)

    Maiti, Moumita; Sen, Kamalika; Sen, Souvik; Lahiri, Susanta

    2011-01-01

    Human chorionic gonadotropin (hCG) is a peptide hormone, whose one of the structural subunits is identical to that of thyroid-stimulating hormone (TSH). As a consequence, the receptors of TSH also act as receptor for hCG hormone. Keeping in mind this interesting property of hCG we have studied the complex formation ability of various no-carrier-added β-emitting isotopes of 61 Cu (3.3 h), 62 Zn (9.2 h), 90 Nb (14.60 h) and 99 Mo (66.02 h) with hCG molecule. Stability of the hCG-M (M=metal ions) complexes was investigated by dialysis with respect to triple distilled water and ringer lactate solution, which has the same composition as extracellular fluid.

  15. Semi-aerobic stabilized landfill leachate treatment by ion exchange resin: isotherm and kinetic study

    Science.gov (United States)

    Zamri, Mohd Faiz Muaz Ahmad; Kamaruddin, Mohamad Anuar; Yusoff, Mohd Suffian; Aziz, Hamidi Abdul; Foo, Keng Yuen

    2017-05-01

    This study was carried out to investigate the treatability of ion exchange resin (Indion MB 6 SR) for the removal of chromium (VI), aluminium (III), zinc (II), copper (II), iron (II), and phosphate (PO4)3-, chemical oxygen demand (COD), ammonia nitrogen (NH3-N) and colour from semi-aerobic stabilized leachate by batch test. A range of ion exchange resin dosage was tested towards the removal efficiency of leachate parameters. It was observed that equilibrium data were best represented by the Langmuir model for metal ions and Freundlich was ideally fit for COD, NH3-N and colour. Intra particle diffusion model, pseudo first-order and pseudo second-order isotherm models were found ideally fit with correlation of the experimental data. The findings revealed that the models could describe the ion exchange kinetic behaviour efficiently, which further suggests comprehensive outlook for the future research in this field.

  16. Functionalized graphene sheets as immobilization matrix for Fenugreek β-amylase: enzyme kinetics and stability studies.

    Directory of Open Access Journals (Sweden)

    Garima Srivastava

    Full Text Available β-Amylase finds application in food and pharmaceutical industries. Functionalized graphene sheets were customised as a matrix for covalent immobilization of Fenugreek β-amylase using glutaraldehyde as a cross-linker. The factors affecting the process were optimized using Response Surface Methodology based Box-Behnken design of experiment which resulted in 84% immobilization efficiency. Scanning and Transmission Electron Microscopy (SEM, TEM and Fourier Tansform Infrared (FTIR spectroscopy were employed for the purpose of characterization of attachment of enzyme on the graphene. The enzyme kinetic studies were carried out for obtaining best catalytic performance and enhanced reusability. Optimum temperature remained unchanged, whereas optimum pH showed shift towards acidic range for immobilized enzyme. Increase in thermal stability of immobilized enzyme and non-toxic nature of functionalized graphene can be exploited for production of maltose in food and pharmaceutical industries.

  17. Thermal stability study for candidate stainless steels of GEN IV reactors

    Energy Technology Data Exchange (ETDEWEB)

    Simeg Veternikova, J., E-mail: jana.veternikova@stuba.sk [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Degmova, J. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Pekarcikova, M. [Institute of Materials Science, Faculty of Materials Science and Technology, Slovak University of Technology, Paulinska 16, 917 24 Trnava (Slovakia); Simko, F. [Department of Molten Salts, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dubravska cesta 9, 845 36 Bratislava (Slovakia); Petriska, M. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Skarba, M. [Slovak University of Technology, Vazovova 5, 812 43 Bratislava (Slovakia); Mikula, P. [Institute of Nuclear and Physical Engineering, Faculty of Electrical and Information Technology, Slovak University of Technology, Ilkovicova 3, 812 19 Bratislava (Slovakia); Pupala, M. [Department of Molten Salts, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dubravska cesta 9, 845 36 Bratislava (Slovakia)

    2016-11-30

    Highlights: • Thermal resistance of advanced stainless steels were observed at 1000 °C. • GEN IV candidate steels were confronted to classic AISI steels. • ODS AISI 316 has weaker thermal resistance than classic AISI steel. • Ferritic ODS steels and NF 709 has better thermal resistance than AISI steels. - Abstract: Candidate stainless steels for GEN IV reactors were investigated in term of thermal and corrosion stability at high temperatures. New austenitic steel (NF 709), austenitic ODS steel (ODS 316) and two ferritic ODS steels (MA 956 and MA 957) were exposed to around 1000 °C in inert argon atmosphere at pressure of ∼8 MPa. The steels were further studied in a light of vacancy defects presence by positron annihilation spectroscopy and their thermal resistance was confronted to classic AISI steels. The thermal strain supported a creation of oxide layers observed by scanning electron microscopy (SEM).

  18. Strain-induced phase transformation behavior of stabilized zirconia ceramics studied via nanoindentation.

    Science.gov (United States)

    Liu, Erqiang; Xiao, Gesheng; Jia, Wufei; Shu, Xuefeng; Yang, Xuexia; Wang, Yulei

    2017-11-01

    To study the tetragonal-to-monoclinic (T-M) phase transformation behavior under different strain rates and indentation depths, nanoindentation tests were performed on stabilized zirconia ceramics with Continuous Stiffness Measurements. The results indicate decreased phase transformation velocities at both lower and higher strain rates, but increased velocity under medium strain rate during loading. The phase transformation process is sensitive to Ṗ/P but the final volume fractions are almost identical (45%). Furthermore, most of the phase transformation is completed during a short initial time followed by slight linear increase of the M-phase volume fraction with holding time. The phase transformation continuously slowed with increasing indentation depth when indented with a constant strain rate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Study of thermal stability of Cu{sub 2}Se thermoelectric material

    Energy Technology Data Exchange (ETDEWEB)

    Bohra, Anil, E-mail: anilbohra786@gmail.com; Bhatt, Ranu; Bhattacharya, Shovit; Basu, Ranita; Singh, Ajay; Aswal, D. K.; Gupta, S. K. [Technical Physics Division, B.A.R.C., Trombay, Mumbai – 400085 (India); Ahmad, Sajid [Nuclear Research Laboratory, Astrophysical Sciences Division, B.A.R.C., Zakura, Srinagar– 190006 (India)

    2016-05-23

    Sustainability of thermoelectric parameter in operating temperature range is a key consideration factor for fabricating thermoelectric generator or cooler. In present work, we have studied the stability of thermoelectric parameter of Cu{sub 2}Se within the temperature range of 50-800°C. Temperature dependent Seebeck coefficients and electrical resistivity measurement are performed under three continuous thermal cycles. X-ray diffraction pattern shows the presence of mixed cubic-monoclinic Cu{sub 2}Se phase in bare pellet which transforms to pure α-Cu{sub 2}Se phase with repeating thermal cycle. Significant enhancement in Seebeck coefficient and electrical resistivity is observed which may be attributed to (i) Se loss observed in EDS and (ii) the phase transformation from mixed cubic-monoclinic structure to pure monoclinic α-Cu{sub 2}Se phase.

  20. Geomechanical wellbore stability modeling of exploratory wells - study case at middle Magdalena basin

    International Nuclear Information System (INIS)

    Carvajal Jimenez, Jenny Mabel; Valera Lara, Luz Carime; Rueda, Alexander; Saavedra Trujillo, Nestor Fernando

    2007-01-01

    This paper presents the geomechanical wellbore stability modal of an exploratory well sited of middle Magdalena basin (MMB), which is based on the validity of linear elastic deformational theory for porous media; the use of correlations and field tools such as well and image logs to indirect determination of mechanical properties and stress state, additionally, it is shown the modal calibration and validation using drilling events which occurred at other previously drilled wells in the study area, of the exploratory well itself and experimentally evaluated mechanical properties on outcrop and core samples from the basin formations. this application allowed the Instituto Colombiano del Petroleo (ICP) of ECOPETROL S.A. to formally perform the geomechanical modeling of Colombian formations and to accomplish a complete and appropriate methodology to do so; such methodology has been standardized as part of the drilling support process of ECOPETROL S.A., supplying the possibility for taking decisions that contribute to reduce drilling costs and risks during operations

  1. Study of Thermal Stress Influence on Dimensional Stability of Silicone Molds

    Science.gov (United States)

    Bajčičák, Martin; Šuba, Roland

    2014-06-01

    The paper is focused on the study of temperature influence on dimensional stability of silicone molds used for spin casting of the low melting points alloys. The silicone material denoted as TEKSIL Silicone-GP-S was used to produce samples during experiments. The samples were heated to temperatures in the range from 100 up to 250oC for 30 up to 120 min. Dimensional changes of the samples in the radial and axial directions aa well as their change of weight were evaluated. The results of experiments proved that thermal stress of silicone molds can influence the size and shape of mold cavities. These results can also explain the possible mechanism of degradation process of silicone molds under thermal stress.

  2. Seismic slope stability of embankments: a comparative study on EC8 provisions

    DEFF Research Database (Denmark)

    Zania, Varvara; Tsompanakis, Y.; Psarropoulos, P.N.

    2011-01-01

    for the selection of either the seismic coefficient or the acceleration time history of the rigid block. Although both ULS and SLS are defined according to acceptable level of deformations at the slope, the assigned level of displacements is not clarified. In the current study the seismic slope stability...... their dynamic response and the permanent seismic displacements. After calculating the horizontal and vertical seismic coefficients from parametric dynamic numerical analyses the seismic permanent displacements were estimated according to Newmark’s sliding block approach. Seismic coefficient spectra for circular...... failure surfaces, based on two levels of acceptable seismic displacements, are proposed. For deep failure surfaces, coupled analyses of a SDOF system with sliding potential along its base have been performed and the critical acceleration was established. The results indicate that displacements...

  3. Indentation studies on Y2O3-stabilized ZrO2

    International Nuclear Information System (INIS)

    Dransmann, G.W.; Steinbrech, R.W.; Pajares, A.; Guiberteau, F.; Dominguez-Rodriguez, A.; Heuer, A.H.

    1994-01-01

    Stable indentation cracks were grown in four-point bend tests to study the fracture toughness of two Y 2 O 3 -stabilized ZrO 2 ceramics containing 3 and 4 mol% Y 2 O 3 . By combining microscopic in situ stable crack growth observations at discrete stresses with crack profile measurements, the dependence of toughness on crack extension was determined from crack extension plots, which graphically separate the crack driving residual stress intensity and applied stress intensity factors. Both materials exhibit steeply rising R-curves, with a plateau toughness of 4.5 and 3.1 MPa·m 1/2 for the 3- and 4-mol% materials, respectively. The magnitude of the plateau toughness reflects the fraction of tetragonal grain contributing to transformation toughening

  4. Study of Thermal Stress Influence on Dimensional Stability of Silicone Molds

    Directory of Open Access Journals (Sweden)

    Bajčičák Martin

    2014-06-01

    Full Text Available The paper is focused on the study of temperature influence on dimensional stability of silicone molds used for spin casting of the low melting points alloys. The silicone material denoted as TEKSIL Silicone-GP-S was used to produce samples during experiments. The samples were heated to temperatures in the range from 100 up to 250oC for 30 up to 120 min. Dimensional changes of the samples in the radial and axial directions aa well as their change of weight were evaluated. The results of experiments proved that thermal stress of silicone molds can influence the size and shape of mold cavities. These results can also explain the possible mechanism of degradation process of silicone molds under thermal stress.

  5. Aging and Phase Stability Studies of Alloy 22 FY08 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Torres, S G

    2008-04-03

    This report is a compilation of work done over the past ten years in support of phase stability studies of Alloy 22 for the Yucca Mountain Project and contains information previously published, reported, and referenced. Most sections are paraphrased here for the convenience of readers. Evaluation of the fabrication processes involved in the manufacture of waste containers is important as these processes can have an effect on the metallurgical structure of an alloy. Because material properties such as strength, toughness, aging kinetics and corrosion resistance are all dependent on the microstructure, it is important that prototypes be built and evaluated for processing effects on the performance of the material. Of particular importance are welds, which have an as-cast microstructure with chemical segregation and precipitation of complex phases resulting from the welding process. The work summarized in this report contains information on the effects of fabrication processes such as solution annealing, stress mitigation, heat-to-heat variability, and welding on the kinetics of precipitation, mechanical, and corrosion properties. For a waste package lifetime of thousands of years, it is impossible to test directly in the laboratory the behavior of Alloy 22 under expected repository conditions. The changes that may occur in these materials must be accelerated. For phase stability studies, this is achieved by accelerating the phase transformations by increasing test temperatures above those anticipated in the proposed repository. For these reasons, Alloy 22 characterization specimens were aged at Lawrence Livermore National Laboratory (LLNL) Aging Facilities for times from 1 hour up to 8 years at temperatures ranging from 200-750 C. These data as well as the data from specimens aged at 260 C, 343 C, and 427 C for 100,028 hours at Haynes International will be used for performance confirmation and model validation.

  6. STUDY ON THE THERMAL STABILITY OF EPA AND DHA IN MUJAHIR (Oreochromis mossambicus FISH OIL

    Directory of Open Access Journals (Sweden)

    Ngatidjo Hadipranoto

    2010-06-01

    Full Text Available EPA (Eicosapentaenoic acid and DHA (Docosahexaenoic acid content in common fresh water fish : mujahir (Oreochromis mossambicus after indirect heating were analysed. The aims of this study were to determine the effect of indirect heating process and α-tocopherol additions on both fatty acid stability.Lipids content in the mujahir fillets were extracted by Folch method using chloroform-metanol (2:1 mixture. Fatty acids in fish oil were converted to fatty acid methyl esters and then injected into gas chromatography to determine the EPA and DHA concentration. Operating condition of gas chromatography were programmed as follows: injection port temperature at 270 oC, detector at 280 oC, initial column temperature at 200 oC, and the final at 280 oC, the carrier gas was helium with flow rate of 10 ml per minute and temperature of column was increased gradually at 10 oC per minute. The effect of α-tocopherol addition on the stability of EPA and DHA was studied by adding α-tocopherol at 50 to 200 mg per kilogram sample before indirect heating process was carried out.The analysis of mujahir fish oil showed that the content of EPA and DHA in 100 grams fresh sample was 105 and 406,5 mg respectivelly. Indirect heating caused the EPA and DHA content decreased significantly. The addition of α-tocopherol results in a positive corelation between α-tocopherol concentration added and the decrease of EPA and DHA content during the heating process.   Keywords: fatty acid, eicosapentaenoic acid, docosahexaenoic acid

  7. Comparison of the applicability of commercial computer programs to study the thermodynamic stability of metal oxides

    International Nuclear Information System (INIS)

    Koukkari, P.; Olin, M.; Laitinen, T.; Sippola, H.

    1999-04-01

    The oxide films formed on primary circuit surfaces incorporate radioactive species from the coolant and influence different corrosion phenomena in nuclear power plants. One approach to improve the understanding on the formation and properties of these oxide films is to evaluate their thermodynamic stability. The aim of this work was to compare and demonstrate the applicability of different commercial thermodynamic computer programs to model the deposition of oxides containing iron, chromium and/or nickel in various nuclear power plant environments. The programs considered in this evaluation comprised the EQ3/6 program and a product group including such products as ChemSage, HSC (including SOLGASMIX and GIBBS), H+PLUS and ChemSheet. In the group the transfer of data between different products is relatively easy. The goal was to find out which programs can be applied to evaluate the stability of oxide films, but not to assess the absolute accuracy of the calculations. The evaluation was done by means of applying the programs to calculate the stability of pure and mixed oxides of iron, nickel and chromium on stainless steel both in WWER and BWR conditions at different temperatures and coolant compositions. The comparison showed that EQ3/6 is suitable for most thermodynamic calculations. EQ3/6 can be characterised as a professional tool, for which no commercial training is available. ChemSage is a versatile and reliable program, which can be well used together with HSC and H+PLUS. ChemSage is mainly a professional tool, while HSC is easier to operate by an occasional user. Commercial training and support is available for both ChemSage and HSC. ChemSheet has been designed to utilise the properties of ChemSage in a user-friendly spreadsheet environment. All the products tested calculate thermodynamic equilibrium. Thus they are suitable to characterise such conditions in which the formation of a certain phase is or becomes possible. On the other hand, the modelling of the

  8. Study of the counting stability and efficiencies of radon chamber counters

    International Nuclear Information System (INIS)

    Jiang, H.; Holtzman, R.B.; Markun, F.

    1984-01-01

    The counting stability and relative efficiencies of our radon chamber counters were tested under stringent conditions. Although the instruments are sensitive to changes in temperature, normal operation is not seriously affected. Nevertheless, periodic checks for stability and monitoring of room temperature are necessary. 3 references, 3 figures, 2 tables

  9. Boiling water reactors stability analysis - a challenge for the study of complex nonlinear dynamical systems

    International Nuclear Information System (INIS)

    Hennig, D.

    1997-01-01

    In boiling water reactors, there is a region in the operating map for which the reactor exhibits stable or unstable power oscillations. This oscillatory behaviour had to be understood in detail, in order to estimate, in a reliable way, the stability limits. This paper describes the BWR stability analysis methodology used at PSI and presents some recent results. (author) figs., tab., 38 refs

  10. Numerical Study of Global Stability of Oblate Field-Reversed Configurations

    Energy Technology Data Exchange (ETDEWEB)

    E.V. Belova; S.C. Jardin; H. Ji; M. Yamada; R. Kulsrud

    2000-10-27

    Global stability of the oblate (small elongation, E < 1) Field-Reversed Configuration (FRC) has been investigated numerically using both three-dimensional magnetohydrodynamic (MHD) and hybrid (fluid electrons and kinetic ions) simulations. For every non-zero value of the toroidal mode number n, there are three MHD modes that must be stabilized. For n = 1, these are the interchange, the tilt and the radial shift; while for n > 1 these are the interchange and two co-interchange modes with different polarization. It is shown that the n = 1 tilt mode becomes an external mode when E < 1, and it can be effectively stabilized by close-fitting conducting shells, even in the small Larmor radii (MHD) regime. The tilt mode stability improves with increasing oblateness, however at suffciently small elongations the radial shift mode becomes more unstable than the tilt mode. The interchange mode stability is strongly profile dependent, and all n * 1 interchange modes can be stabilized for a class of pressure profile with separatrix beta larger than 0.035. Our results show that all three n = 1 modes can be stabilized in the MHD regime, but the stabilization of the n > 1 co-interchange modes still remains an open question.

  11. Changes in Trunk and Head Stability in Children with Cerebral Palsy after Hippotherapy: A Pilot Study

    Science.gov (United States)

    Shurtleff, Tim L.; Engsberg, Jack R.

    2010-01-01

    Hippotherapy (HPOT) is a therapy that uses horse movement. This pilot investigation objectively evaluated the efficacy of HPOT in improving head/trunk stability in children with cerebral palsy (CP). The participants were six children with spastic diplegia and six children without disability. Head and trunk stability was challenged by using a…

  12. X-Ray Diffraction Studies on the Thermal Stability of Calcium ...

    African Journals Online (AJOL)

    acer

    into other phosphates possibly beta tricalcium phosphate(β-TCP). Solid solutions synthesized in the presence of DEA show remarkable stability and enhanced crystallinity at that temperature. The stability was probably due to the added organic molecule which acted as a template. KEYWORDS: Apatites, solid solutions, ...

  13. Theoretical studies on the stability of the salts formed by DTDO with ...

    Indian Academy of Sciences (India)

    stabilities of the three conformations are different, their values are comparable. Keywords. Salts; conformations; stability .... G and E are the values relative to those of 1A and 2A, respectively. Table 2. Predicted VH,t, EH,t, E2,t, q, ..... Bohmann J, Morales C and Weinhold F, NBO, Ver- sion 50, Theoretical Chemistry Institute, ...

  14. In Situ Stability of Substrate-Associated Cellulases Studied by DSC

    DEFF Research Database (Denmark)

    Borch, Kim; Cruys-Bagger, Nicolaj; Badino, Silke Flindt

    2014-01-01

    . There was no correlation between the intrinsic stability, specified by the transition temperature in the DSC, and the long-term stability derived from the peak area. The results are discussed with respect to the role of enzyme denaturation for the ubiquitous slowdown observed in the enzymatic hydrolysis of cellulose....

  15. Ligamentous contributions to pelvic stability in a rotationally unstable open-book injury: a cadaver study.

    Science.gov (United States)

    Abdelfattah, Adham; Moed, Berton R

    2014-10-01

    Due to the orientation of the sacroiliac joint (SIJ), as the symphysis widens in an open-book pelvic ring disruption, it should displace inferiorly. The purposes of this study were to reconfirm this inferior displacement and to evaluate the relative contributions of the pubic symphysis (PS), the sacrotuberous/sacrospinous ligament complex (STL/SSL) and the anterior sacroiliac ligament (ASIL) to pelvic ring stability in a rotationally unstable open-book injury. For each of 6 cadaver pelves, the right hemipelvis was fixed to a table and the PS was sectioned. Under fluoroscopy, a manual external rotational force was then applied through the unfixed, left ilium. At the point of maximal displacement, a permanent AP image was obtained. With magnification corrected, horizontal (H) and vertical (V) displacements were measured. The pelves were then divided into two groups of three each. In Group 1, the PS release was followed by sectioning of the STL/SSL, and then the ASIL. In Group 2, the PS release was followed by sectioning of the ASIL and then the STL/SSL. The above described technique of manual manipulation and radiographic measurement was repeated after each stage of ligament release. The displacement after initial PS sectioning was not significantly different when comparing Group 1 to Group 2. In both groups, a significant and progressive increase in displacement was noted when the PS (H and V; ppelvic ring external rotational stability. However, the SSL/STL has little, if any, effect in this regard. Due to the orientation of the SIJ, external rotation of the hemipelvis, as in open-book injury, will show inferior vertical, as well as horizontal, displacement on the AP radiograph, despite the PSIL being intact. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Studies on Foam Decay Trend and Influence of Temperature Jump on Foam Stability in Sclerotherapy.

    Science.gov (United States)

    Bai, Taoping; Chen, Yu; Jiang, Wentao; Yan, Fei; Fan, Yubo

    2018-02-01

    This study investigated the influence of temperature jump and liquid-gas ratio on foam stability to derive the foam-decay law. The experimental group conditions were as follows: mutation temperatures (10°C, 16°C, 20°C, 23°C, 25°C, and 27°C to >37°C) and liquid-gas ratios (1:1, 1:2, 1:3, and 1:4). The control group conditions were as follows: temperatures (10°C, 16°C, 20°C, 23°C, 25°C and 27°C) and liquid-gas ratios (1:1, 1:2, 1:3, and 1:4). A homemade device manufactured using the Tessari DSS method was used to prepare the foam. The decay process was videotape recorded. In the drainage rate curve, the temperature rose, and the liquid-gas ratio varied from 1:1 to 1:4, causing faster decay. In the entire process, the foam volume decreased with increasing drainage rate. The relationships were almost linear. Comparison of the experimental and control groups shows that the temperature jump results in a drainage time range of 1 to 15 seconds. The half-life ranges from 10 to 30 seconds. The maximum rate is 18.85%. Changes in the preparation temperature yields a drainage time range of 3 to 30 seconds. The half-life varies from 20 to 60 seconds. Decreasing the temperature jump range and liquid-gas ratio gradually enhances the foam stability. The foam decay time and drainage rate exhibit an exponential function distribution.

  17. Comparative study of a novel application of automated HR HPV assay and stability in a previously untested Preservative media.

    Science.gov (United States)

    Morel, Mike E; McBride, Simon E; Gomez, Maria P

    2017-12-01

    The suitability and stability of cervical cells in Novaprep media (NHQ) for certain HPV assays is unknown. We evaluated the accuracy of an automated HPV assay (Abbott RealTime HR HPV) for cervical cells prepared in NHQ and NHQ with a pre-treatment to mimic a worst case clinical use, compared to the assay manufacturers media; repeatability and reproducibility of HPV results and the stability of detectable HPV in NHQ over time compared to CE marked liquid based cytology preservatives. Cell lines were used to simulate patient samples. Cells stored in NHQ produced accurate, repeatable and reproducible results. Stability in NHQ was comparable to the best performing LBC, with at least 7 months' stability at 18-25°C, 2-8°C, -20°C and -80°C; and at least 3 months' stability at 40°C. Similar results were obtained for pre-treated NHQ except only 3.5 months' stability at 18-25°C. Cell line samples in all media and concentrations tested were detected appropriately by the assay. Based on this first stage validation analytical study, cervical cells stored in NHQ are suitable for the Realtime HPV assay. There should be no reservations for inclusion of NHQ in any further validation and clinical performance evaluation of this assay. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  18. Influence of screw augmentation in posterior dynamic and rigid stabilization systems in osteoporotic lumbar vertebrae: a biomechanical cadaveric study.

    Science.gov (United States)

    Hoppe, Sven; Sven, Hoppe; Loosli, Yannick; Yannick, Loosli; Baumgartner, Daniel; Daniel, Baumgartner; Heini, Paul; Paul, Heini; Benneker, Lorin; Lorin, Benneker

    2014-03-15

    Biomechanical cadaveric study. To determine whether augmentation positively influence screw stability or not. Implantation of pedicle screws is a common procedure in spine surgery to provide an anchorage of posterior internal fixation into vertebrae. Screw performance is highly correlated to bone quality. Therefore, polymeric cement is often injected through specifically designed perforated pedicle screws into osteoporotic bone to potentially enhance screw stability. Caudocephalic dynamic loading was applied as quasi-physiological alternative to classical pull-out tests on 16 screws implanted in osteoporotic lumbar vertebrae and 20 screws in nonosteoporotic specimen. Load was applied using 2 different configurations simulating standard and dynamic posterior stabilization devices. Screw performance was quantified by measurement of screwhead displacement during the loading cycles. To reduce the impact of bone quality and morphology, screw performance was compared for each vertebra and averaged afterward. All screws (with or without cement) implanted in osteoporotic vertebrae showed lower performances than the ones implanted into nonosteoporotic specimen. Augmentation was negligible for screws implanted into nonosteoporotic specimen, whereas in osteoporotic vertebrae pedicle screw stability was significantly increased. For dynamic posterior stabilization system an increase of screwhead displacement was observed in comparison with standard fixation devices in both setups. Augmentation enhances screw performance in patients with poor bone stock, whereas no difference is observed for patients without osteoporosis. Furthermore, dynamic stabilization systems have the possibility to fail when implanted in osteoporotic bone.

  19. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    International Nuclear Information System (INIS)

    Migliardo, F.; Salmeron, C.; Bayan, N.

    2013-01-01

    Highlights: ► Neutron scattering measurements have been performed on mycolate water mixtures. ► A comparison with lecithin lipid water mixtures has been carried out. ► Mycolates show a lower mobility and flexibility compared to lecithin. ► The observed peculiarities of mycolic acids could be ascribed to trehalose. ► The results could justify the high resistance to thermal stress of mycobacteria. - Abstract: The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H 2 O and lecithin/H 2 O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics

  20. Feasibility study and technical proposal for long-term observations of bedrock stability with gps

    International Nuclear Information System (INIS)

    Ruizhi Chen; Kakkuri, J.

    1994-01-01

    In order to study the regional crustal deformation pattern in the territory of Finland, the Finnish Geodetic Institute is establishing the Finnish Permanent GPS Network, which is part of the Fennoscandian Permanent GPS Network. The Finnish GPS Network consists of a 12 stations located in different geological structures. The operation procedure of the network is described in the report. Feasibility study for monitoring the bedrock stability at local scale was performed. The study was carried out on the basis of an experiment on a baseline of 1041 metres. Twelve artificial movements ranging from 1 mm to 22 mm were generated with a precision-manufactured screw drive (with an accuracy of better than +-0.05 mm). The artificial movements were then detected with the GPS measurements. A preliminary analysis of the GPS data shows that the maximum difference between the GPS detected movements and the artificial movements is 0.9 mm with a standard deviation of +-0.46 mm. The observation time for reaching such accuracy is about 55 minutes. Three GPS networks were preliminarily designed for the radioactive waste disposal investigation sites of Olkiluoto, Kivetty and Romuvaara. Detailed research plan for achieving the best possible result from GPS measurements was proposed. (58 refs., 25 figs., 1 tab.)

  1. A neutron scattering study on the stability of trehalose mycolates under thermal stress

    Energy Technology Data Exchange (ETDEWEB)

    Migliardo, F., E-mail: fmigliardo@unime.it [Department of Physics, University of Messina, Viale D’Alcontres 31, 98166 Messina (Italy); Salmeron, C.; Bayan, N. [Laboratoire de Microbiologie Moléculaire et Cellulaire, IBBMC, Bat 430, Université de Paris Sud XI, 15 rue Georges Clémenceau, 91405 Orsay Cedex (France)

    2013-10-16

    Highlights: ► Neutron scattering measurements have been performed on mycolate water mixtures. ► A comparison with lecithin lipid water mixtures has been carried out. ► Mycolates show a lower mobility and flexibility compared to lecithin. ► The observed peculiarities of mycolic acids could be ascribed to trehalose. ► The results could justify the high resistance to thermal stress of mycobacteria. - Abstract: The present paper is focused on the study of the dynamics of mycolic acids, which are fundamental components of the outer membrane (mycomembrane) of Mycobacterium tuberculosis. An elastic neutron scattering study of mycolic acid/H{sub 2}O and lecithin/H{sub 2}O mixtures as a function of temperature and exchanged wavevector Q has been carried out. This study provides an effective way for characterizing the dynamical properties, furnishing a set of parameters characterizing the different flexibility and rigidity of the investigated lipids. The behavior of the elastically scattered intensity profiles and the derived mean square displacements as a function of temperature shows a more marked temperature dependence for lecithin lipids in comparison with mycolic acids, so revealing a higher thermal stability of these latter. These findings could be useful for understanding the dynamics-function relation in the mycomembrane and then to relate it to the low permeability and high resistance of mycobacteria to many antibiotics.

  2. Studies for the stabilization of coal-oil mixtures. Final report, August 1978-May 1981

    Energy Technology Data Exchange (ETDEWEB)

    Botsaris, G.D.; Glazman, Y.M.; Adams-Viola, M.

    1981-01-01

    A fundamental understanding of the stabilization of coal-oil mixtures (COM) was developed. Aggregation of the coal particles was determined to control both the sedimentation and rheological properties of the COM. Sedimentation stability of COM prepared with coal, 80% < 200 mesh, is achieved by particle aggregation, which leads to the formation of a network of particles throughout the oil. The wettability of coal powders was evaluated by the Pickering emulsion test and a spherical agglomeration test to assess its effect on the stability of various COM formulations. Sedimentation stability of hydrophilic coal-oil-water mixtures (COWM) involves the formation of water bridges between the coal particles, while less stabilization of oleophilic COWM is achieved by the formation of an emulsion. Anionic SAA were least sensitive to the coal type and enhanced the aggregation stability of the suspension. The effect of cationic SAA, nonionic SAA and polymer additives depended upon the specific chemical structure of the SAA, the water content of the COM and the type of coal. The sedimentation stability of ultrafine COM was not directly due to the fineness of the powder but due to the formation of a network of flocculated particles.

  3. Experimental study on the solidification and influence factors of MSW stabilized soil

    Directory of Open Access Journals (Sweden)

    Wang Zhiping

    2015-01-01

    Full Text Available The effect of kinds and dosage of curing agent on the curing effect and strength characteristics of municipal solid waste (MSW stabilized soil is very obvious. In order to reveal these effects, this paper uses cement, fly ash, lime and gypsum as main curing agent and additives to make MSW stabilized soil samples of different components and contents and its strength is obtained using unconfined compressive strength test. The results showed that the curing age, dosage of cement, fly ash, lime and gypsum have effect on the strengths of stabilized MSW soil. The bigger the content of cement and fly ash, the higher the strength of stabilized soil. But the amount of lime and gypsum has a critical value. Within the critical value, the strength of the stabilized soil increases with the increasing of the content of the additives, and decreases with the increase of the additives content if the content of the additives exceeds the critical value. The curing age has much effect on the strength of the stabilized soil. The strength of the samples for 7 days is far less than that for 28 days. This can be explained that: when the curing agent is added into the stabilized soil, the connection among the particles of the MSW soil is changed from weak connection to bond connection, and therefore the strength of the curing MSW soil is improved.

  4. Study of the rise of gas bubbles in a viscous liquid. Stability and speed. Bibliographical study

    International Nuclear Information System (INIS)

    Dahan, Gilbert

    1969-01-01

    This short thesis reports a bibliographical study on the movement of gas bubbles in viscous liquids. The author addresses the formation of gas bubbles in liquids of different viscosity (devices used for the formation of bubbles in viscous liquids, formation of bubbles at a hole), and the behaviour of bubbles rising in viscous liquids and more particularly the speed and shape of these bubbles [fr

  5. Studies on chalcone derivatives: Complex formation, thermal behavior, stability constant and antioxidant activity

    Science.gov (United States)

    El-Sayed, Yusif S.; Gaber, M.

    2015-02-01

    The chalcone 3-[4‧-dimethylaminophenyl]-1-(2-pyridyl) prop-2-en-1-one (DMAPP) and 3-(4‧-diethylaminophenyl)-1-(2-pyridinyl) prop-2-en-1-one abbreviated as DEAPP have been synthesized and characterized with IR, 1H NMR, 13C NMR spectroscopic techniques as described previously (El-Daly et al., 2008; Gaber et al., 2009; El-Sayed, 2013). By using UV visible spectroscopy method the mole fraction ratio for copper with DMAPP and DEAPP complexes were determined and it was found to be 1:1. The stability constants of this complex have been determined by Job's method. The stability constant (Kf) of copper with DMAPP and DEAPP complexes in universal buffer pH = 3.2 was determined to be 9.9 × 104 and 5.2 × 104 respectively. The effect of Cu(II) ion on the emission spectrum of the free chalcone is also assigned. Adherence to Beer's law and Ringbom optimum concentration ranges are determined. The thermal decomposition of the metal complexes is studied by TGA technique. The kinetic parameters like activation energy, pre-exponential factor and entropy of activation are estimated. The structure of complexes was energetically optimized through molecular mechanics applying MM+ force field coupled with molecular dynamics simulation. The bond lengths and bond angles have been calculated to confirm the geometry of the ligands and their Cu(II) complexes. The mode of interaction of the chalcone to copper nanoparticles was studied. The apparent association constants of the colloidal copper nanoparticles:chalcone complexes in solution were evaluated using the spectral method and compared with the formation constant of the Cu(II) chalcone complexes. Antioxidant activity of these chalcones was evaluated by using 1,1‧-diphenyl-2-picrylhydrazyl (DPPHrad) radicals scavenging method, which showed that the antioxidant activity of DMAPP has higher value than the DEAPP. Semi-empirical study results showed that DMAPP have higher dipole moment than DEAPP [1].

  6. Study on stability of labeled yttrium-90 with lipiodol by chemical extraction for liver cancer

    International Nuclear Information System (INIS)

    Mu, P.Y.; Jiang, X.L.; Chen, J.; Zhu, Y.J.

    2005-01-01

    Liver cancer, particularly hepatocellular carcinoma, is one of the most common malignant diseases in many developed and developing countries. It is also one of the most common diseases endangering the people's lives and health heavily. Surgery is very effective in early-stage patients. Unfortunately, there is less than 10% of the patients with hepatocellular carcinoma fitting for surgical therapy. Instead of surgical therapy, other methods are considered for patients in whom surgery may not work well. Systemic administration of chemotherapeutic agents is not often considered in liver cancer patients, due to discouraging result and adverse side effects. Also, hepatocellular carcinoma is not keen on usual radioactive therapy. However, method of inner interventional radioactive nuclide is a potential way to cure liver tumors. Hepatocellular carcinoma would be cured with inner interventional radioactive nuclide, which is a hot topic in experimental research on hepatocellular carcinoma at home and abroad. The purpose of the study is to label Yttrium-90 with lipiodol by means of the chemical extraction method and research the stability of labeled Yttrium-90 ( 90 Y-P204-Lipiodol) in serum of a newly-born cattle and human's blood. We chose to label steady yttrium with lipiodol, because radioactive yttrium has great nuclear character for liver cancer, yttrium-90 can eradiate pure β radial, and it's half time is 64 hours. Average energy of it is 0.93 Mev, the highest energy is 2.27 Mev. Yttrium-90 can be labeled with lipiodol by means of the chemical extraction method, which is mature in chemical techniques, combined with method of radioactive nuclide labeled in. nuclear medicine. At first, yttrium-90 is extracted in certain condition(pH, temperature, whisk time, whisk frequency, etc ) after adding yttrium-90 solution. We use some distilled water to balance the labeled organic phase twice, and test the stability of labeled yttrium-90 in serum of a newly-born cattle and

  7. The association between trunk muscle endurance and lumbo-pelvic stability in adolescent low back pain: A cross sectional study

    Directory of Open Access Journals (Sweden)

    F. Lewis

    2013-11-01

    Full Text Available Decreased trunk muscle endurance has been identified as a risk factor for adolescent LBP, and poor lumbo-pelvic stability has been found to be associated with LBP in the adult population. The aim of the study was to investigate the association between adolescent LBP, trunk muscle endurance and poor lumbo-pelvic stability. Design: A cross sectional study. Participants: 80 adolescents in grade 8 to grade 11, aged 12 to 17 years, at three high schools in Gauteng, who agreed to participate in the study. Method: Data was collected by means of a validated questionnaire and physical tests. The active straight leg raise test was used to record the lumbo-pelvic stabilising muscles. The Sorensen, Shirado and side-bridge tests were used to record trunk extensor, flexor and side flexor muscle endurance, respectively. Results: The results revealed a lifetime prevalence of LBP of 82.50%, one year prevalence of 78.80% and point prevalence of 23.80%. Adolescents with LBP demonstrated decreased trunk extensor muscle endurance but increased trunk flexor muscle endurance (p=0.044, compared to non-LBP adolescents. Poor lumbo-pelvic stability was not associated with adolescent LBP, but was associated with decreased extensor trunk muscle endurance (p=0.031. Conclusion: There was an association between trunk flexor muscle endurance and adolescent LBP, and between decreased trunk extensor muscle endurance and poor lumbo-pelvic stability. No association was found between LBP and poor lumbo-pelvic stability.

  8. Effects of inferior tibiofibular syndesmosis injury and screw stabilization on motion of the ankle: a finite element study.

    Science.gov (United States)

    Liu, Qinghua; Zhao, Guanghui; Yu, Bin; Ma, Jianbin; Li, Zhong; Zhang, Kun

    2016-04-01

    Traditional studies of syndesmosis injury and screw stabilization have been conducted in cadaveric models, which cannot yield sufficient and exact biomechanical data about the interior of the ankle. The purpose of this study was to evaluate the effects of inferior tibiofibular syndesmosis injury (ITSI) and screw stabilization on the motion of the ankle with finite element analysis. Three-dimensional models of the ankle complex were created with CT images of a volunteer's right ankle in three states: normal, post-ITSI, and stabilization with a screw 2.5 cm above (parallel to) the ankle. Simulated loads were applied under three conditions: neutral position with single foot standing, internal rotation, and external rotation of the ankle. Compared with the normal state, ITSI increased the relative displacement between the lower extremes of the tibia and fibula in the anteroposterior and mediolateral directions and the angular motion of the tibia, fibula, and talus at internal and external rotations (ERs). However, when stabilized with syndesmotic screws, the range of motion (ROM) and all these parameters significantly decreased. ITSI can lead to internal and ER instability of the ankle joint. Screw stabilization is effective in controlling the instability, but may reduce markedly the ROM of the ankle joint. Through this study, it can be proposed that the screws should be removed once the healing is gained in order to restore normal function of the ankle joint as soon as possible.

  9. Study of structural stability and damaging effect on membrane for four Aβ42 dimers.

    Directory of Open Access Journals (Sweden)

    Wei Feng

    Full Text Available Increasing evidence shows that Aβ oligomers are key pathogenic molecules in Alzheimer's disease. Among Aβ oligomers, dimer is the smallest aggregate and toxic unit. Therefore, understanding its structural and dynamic properties is quite useful to prevent the formation and toxicity of the Aβ oligomers. In this study, we performed molecular dynamic simulations on four Aβ42 dimers, 2NCb, CNNC, NCNC and NCCN, within the hydrated DPPC membrane. Four Aβ42 dimers differ in the arrangements of two Aβ42 peptides. This study aims to investigate the impact of aggregation pattern of two Aβ peptides on the structural stability of the Aβ42 dimer and its disruption to the biological membrane. The MD results demonstrate that the NCCN, CNNC and NCNC have the larger structural fluctuation at the N-terminus of Aβ42 peptide, where the β-strand structure converts into the coil structure. The loss of the N-terminal β-strand further impairs the aggregate ability of Aβ42 dimer. In addition, inserting Aβ42 dimer into the membrane can considerably decrease the average APL of DPPC membrane. Moreover this decrease effect is largely dependent on the distance to the location of Aβ42 dimer and its secondary structure forms. Based on the results, the 2NCb is considered as a stable dimeric unit for aggregating the larger Aβ42 oligomer, and has a potent ability to disrupt the membrane.

  10. Derivatization of labetalol hydrochloride for its spectrofluorimetric and spectrophotometric determination inhuman plasma: Application to stability study

    Science.gov (United States)

    Omar, Mahmoud A.; Derayea, Sayed M.; Abdel-Lateef, Mohamed A.; El Hamd, Mohamed A.

    2018-02-01

    Two simple, selective and accurate methods were developed for the determination of Labetalol hydrochloride in pure form and pharmaceutical tablets. Both methods are based on derivatization of the studied drug with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBDsbnd Cl) in alkaline medium (pH 7.5).The reaction product was measured spectrofluorimetrically at 540 nm after excitation at 476 nm (method I) or spectrophotometrically at 480 nm (method II). The calibration graphs were rectilinear over the concentration ranges of 0.10-2.0 and 1.0-11.0 μg mL- 1 for methods I and II, respectively. The proposed methods were successfully applied to the analysis of commercial tablets without interference from common excipients. Furthermore, the spectrofluorimetric method was utilized for the in vitro determination of labetalol in spiked human plasma, with a percent mean recovery (n = 3) of 97.80 ± 1.29%. Moreover, the spectrofluorimetric method was extended to examine the stability study of LBT under different stress conditions such as alkaline, acidic, oxidative, photolytic and a thermal degradation.

  11. Stochastic stabilization of phenotypic States: the genetic bistable switch as a case study.

    Science.gov (United States)

    Weber, Marc; Buceta, Javier

    2013-01-01

    We study by means of analytical calculation and stochastic simulations how intrinsic noise modifies the bifurcation diagram of gene regulatory processes that can be effectively described by the Langevin formalism. In a general context, our study raises the intriguing question of how biochemical fluctuations redesign the epigenetic landscape in differentiation processes. We have applied our findings to a general class of regulatory processes that includes the simplest case that displays a bistable behavior and hence phenotypic variability: the genetic auto-activating switch. Thus, we explain why and how the noise promotes the stability of the low-state phenotype of the switch and show that the bistable region is extended when increasing the intensity of the fluctuations. This phenomenology is found in a simple one-dimensional model of the genetic switch as well as in a more detailed model that takes into account the binding of the protein to the promoter region. Altogether, we prescribe the analytical means to understand and quantify the noise-induced modifications of the bifurcation points for a general class of regulatory processes where the genetic bistable switch is included.

  12. Thermal stability and transition studies with a hybrid warming device for neonates.

    Science.gov (United States)

    Greenspan, J S; Cullen, A B; Touch, S M; Wolfson, M R; Shaffer, T H

    2001-01-01

    The use of both warmer beds and incubators is common in neonatal intensive care units (NICU), and transferring between these two warming devices is a routine and necessary event. This study was designed to evaluate the efficacy of a new hybrid-warming device, the Versalet, in transitioning a preterm animal from a warmer bed to an incubator mode and back. Nine premature lambs were randomized, following delivery, to receive thermal support from a conventional warming bed and an incubator (control group), or from the Versalet (study group) in the warmer bed and incubator modes. Core and various surface temperatures, as well as physiological parameters were measured first during warming in the radiant warmer bed mode, Versalet or Resuscitaire and then during transition to the incubator mode, Versalet or Isolette, and then back to the warmer bed mode. The animals remained stable during all the transitions. Despite careful planning, adverse events occurred in the control group during transfers. There were no significant differences in the temperature or physiologic profiles during any of the transitions in either group. Compared with the standard warming technique used in NICUs (separate warmer bed and incubator), the Versalet provides similar thermal and cardiovascular stability without adverse events during transition to different modes of warming. The degree to which this device would contribute to ease of management and improved outcomes in humans needs to be evaluated in a clinical trial.

  13. Designing, Probing, and Stabilizing Exotic Fabry-Perot Cavities for Studying Strongly Correlated Light

    Science.gov (United States)

    Ryou, Albert

    Synthetic materials made of engineered quasiparticles are a powerful platform for studying manybody physics and strongly correlated systems due to their bottom-up approach to Hamiltonian modeling. Photonic quasiparticles called polaritons are particularly appealing since they inherit fast dynamics from light and strong interaction from matter. This thesis describes the experimental demonstration of cavity Rydberg polaritons, which are composite particles arising from the hybridization of an optical cavity with Rydberg EIT, as well as the tools for probing and stabilizing the cavity. We first describe the design, construction, and testing of a four-mirror Fabry-Perot cavity, whose small waist size on the order of 10 microns is comparable to the Rydberg blockade radius. By achieving strong coupling between the cavity photon and an atomic ensemble undergoing electromagnetically induced transparency (EIT), we observe the emergence of the dark-state polariton and characterize its single-body properties as well as the single-quantum nonlinearity. We then describe the implementation of a holographic spatial light modulator for exciting different transverse modes of the cavity, an essential tool for studying polariton-polariton scattering. For compensating optical aberrations, we employ a digital micromirror device (DMD), combining beam shaping with adaptive optics to produce diffraction-limited light. We quantitatively measure the purity of the DMD-produced Hermite-Gauss modes and confirm up to 99.2% efficiency. One application of the technique is to create Laguerre-Gauss modes, which have been used to probe synthetic Landau levels for photons in a twisted, nonplanar cavity. Finally, we describe the implementation of an FPGA-based FIR filter for stabilizing the cavity. We digitally cancel the acoustical resonances of the feedback-controlled mechanical system, thereby demonstrating an order-of-magnitude enhancement in the feedback bandwidth from 200 Hz to more than 2 k

  14. Formulation and accelerated stability studies for an extemporaneous suspension of amiodarone hydrochloride.

    Science.gov (United States)

    Alexander, Kenneth S; Thyagarajapuram, N

    2003-01-01

    Amiodarone is commercially available as both a tablet and an injectable formulation. It is widely dispensed as an extemporaneously compounded suspension for pediatric and geriatric patients. Extensive stability data at numerous temperatures and a calculated shelf life based on kinetics for such a formulation have not been reported. Refrigeration and room temperature data for finite times have been reported in the literature. In this study, a stable extemporaneous formulation of amiodarone hydrochloride was formulated using Paceron tablets. The formulation consisted of 0.75% carboxymethylcellulose and 0.75% Veegum as suspending agents; 25% sucrose, provided as simple syrup; and aqueous strawberry concentrate as flavor. A total of 2.5L of the formulation was compounded and stored in quanitites of 150 mL in 8-oz glass containers. The initial drug content was determined by reverse-phase high-performance liquid chromatography, with a method that was developed in our laboratory. The stability study was carried out by storing three containers at five different temperatures, namely 4, 30, 40, 50, and 60 deg C. The suspension was analyzed at the end of 2, 6, 12, 24, and 48 hours at 7 days, and, therafter, at the end of every week for 13 weeks. The percentage of drug remaining was plotted against time for each temperature. The slope of the regression line was obtained for each temperature and the zero-order degradation rate constant obtained. The logarithm of the zero-order degradation rate constants was plotted against the inverse of the temperature in degrees Kelvin to obtain the Arrhenius plot. From the regression line for the Arrhenius plot, the zero-order degradation constant at 25 deg C was calculated to be 0.0517 day -1. The shelf life for the formulation at 25 deg C was calculated to be 193.4 days; the shelf life under refrigeration (4 deg C) was found to be 677.3 days. The degradation products were characterized using high-performance liquid chromatographic

  15. Using Dark Field X-Ray Microscopy To Study In-Operando Yttria Stabilized Zirconia Electrolyte Supported Solid Oxide Cell

    DEFF Research Database (Denmark)

    Sierra, J. X.; Poulsen, H. F.; Jørgensen, P. S.

    Dark Field X-Ray Microscopy is a promising technique to study the structure of materials in nanometer length scale. In combination with x-ray diffraction technique, the microstructure evolution of Yttria Stabilized Zirconia electrolyte based solid oxide cell was studied running at extreme operati...

  16. Stability and Change in Executive Function Abilities from Late Adolescence to Early Adulthood: A Longitudinal Twin Study

    Science.gov (United States)

    Friedman, Naomi P.; Miyake, Akira; Altamirano, Lee J.; Corley, Robin P.; Young, Susan E.; Rhea, Sally Ann; Hewitt, John K.

    2016-01-01

    Executive functions (EFs)--the higher level cognitive abilities that enable us to control our own thoughts and actions--continue to develop into early adulthood, yet no longitudinal study has examined their stability during the important life transition from late adolescence to young adulthood. In this twin study (total N = 840 individuals from…

  17. Best practices of using shotcrete for wall fascia and slope stabilization (phase 1 study)

    Science.gov (United States)

    2017-06-01

    Shotcrete has become attractive and holds potential to replace cast-in-place (CIP) concrete for elements like retaining walls and slope stabilization. However, this practice is still limited due to concerns of drying shrinkage cracking, long-term dur...

  18. Laboratory study to investigate the development of stiffness in stabilized materials

    CSIR Research Space (South Africa)

    Paige-Green, P

    2010-08-01

    Full Text Available The development of stiffness of stabilized materials with time is critical to the construction process, particularly in the case of recycling, where traffic is often required to return to the recycled road soon after construction. However, little...

  19. Study of fuzzy adaptive PID controller on thermal frequency stabilizing laser with double longitudinal modes

    Science.gov (United States)

    Mo, Qingkai; Zhang, Tao; Yan, Yining

    2016-10-01

    There are contradictions among speediness, anti-disturbance performance, and steady-state accuracy caused by traditional PID controller in the existing light source systems of thermal frequency stabilizing laser with double longitudinal modes. In this paper, a new kind of fuzzy adaptive PID controller was designed by combining fuzzy PID control technology and expert system to make frequency stabilizing system obtain the optimal performance. The experiments show that the frequency stability of the designed PID controller is similar to the existing PID controller (the magnitude of frequency stability is less than 10-9 in constant temperature and 10-7 in open air). But the preheating time is shortened obviously (from 10 minutes to 5 minutes) and the anti-disturbance capability is improved significantly (the recovery time needed after strong interference is reduced from 1 minute to 10 seconds).

  20. Study and Application on Stability Classification of Tunnel Surrounding Rock Based on Uncertainty Measure Theory

    Directory of Open Access Journals (Sweden)

    Hujun He

    2014-01-01

    Full Text Available Based on uncertainty measure theory, a stability classification and order-arranging model of surrounding rock was established. Considering the practical engineering geologic condition, 5 factors that influence surrounding rock stability were taken into account and uncertainty measure function was obtained based on the in situ data. In this model, uncertainty influence factors were analyzed quantitatively and qualitatively based on the real situation; the weight of index was given based on information entropy theory; surrounding rock stability level was judged based on credible degree recognition criterion; and surrounding rock was ordered based on order-arranging criterion. Furthermore, this model was employed to evaluate 5 sections surrounding rock in Dongshan tunnel of Huainan. The results show that uncertainty measure method is reasonable and can have significance for surrounding rock stability evaluation in the future.

  1. Study of the stability of suspended solids in chemical cleaning solvents used in nuclear steam generators

    International Nuclear Information System (INIS)

    Gilbert, R.

    1982-01-01

    Zeta potential (ZP) values were calculated from electrophoresis measurements performed on Fe 3 O 4 and Cu 2 O particles and used with microscope observations to assess the degree of stability of the suspended solids in the acidic and alkaline solvents employed for cleaning nuclear steam generators. In the acidic solvent, the degree of stability proved outstandingly good with a ZP of approximately -352 mV. The EDTA and citric acid constituents of the solvent are potential-determining ions acting as anionic surface-active agents. Nitrogen bubbling and the presence of N 2 H 4 have a stabilizing effect on the suspensions, which increases as the solvent ages. On the other hand, suspensions in the alkaline solvent are unstable, with ZP values between -10 and -30 mV. Surface-active agents of the anionic carboxylate type are far more effective than the non-ionic type for improving stability. (author)

  2. The association between trunk muscle endurance and lumbo-pelvic stability in adolescent low back pain: A cross sectional study

    OpenAIRE

    F. Lewis; W. Wood; B. Olivier

    2013-01-01

    Decreased trunk muscle endurance has been identified as a risk factor for adolescent LBP, and poor lumbo-pelvic stability has been found to be associated with LBP in the adult population. The aim of the study was to investigate the association between adolescent LBP, trunk muscle endurance and poor lumbo-pelvic stability. Design: A cross sectional study. Participants: 80 adolescents in grade 8 to grade 11, aged 12 to 17 years, at three high schools in Gauteng, who agreed to participate in the...

  3. Study of necking stability in tension test of zircaloy-2, on range from 170 0 C to 620 0 C

    International Nuclear Information System (INIS)

    Okuda, M.Y.

    1975-01-01

    The objective of this work is to study necking behavior of Zircaloy-2 in a tension test in which the temperature range varies from 170 0 C to 620 0 C by means of a model. This model provides strain rate variations in the beginning of necking and the parameters in the / necking stability. A new parameter Ψ is presented which permits necking / stability description in metals by means of a simple tension test. It is also proceeded a behavioral study of ε versus ε curve after necking formation. (author)

  4. Structure and Stability of Pt-Y Alloy Particles for Oxygen Reduction Studied by Electron Microscopy

    DEFF Research Database (Denmark)

    Deiana, Davide; Wagner, Jakob Birkedal; Hansen, Thomas Willum

    2015-01-01

    Platinum-yttrium alloy nanoparticles show both a high activity and stability for the oxygen reduction reaction. The catalysts were prepared by magnetron sputter aggregation and mass filtration providing a model catalyst system with a narrow size distribution. The structure and stability of nanost...... the catalyst after reaction and after aging tests shows the development of a core-shell type structure after being exposed to reaction conditions....

  5. A comparative study of voltage stability indices in a power system

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, A.K. [I.I.T., Kharagpur (India). Dept. of Electrical Engineering; Hazarika, D. [Assam Engineering College (India)

    2000-11-01

    The paper compares the effectiveness of voltage stability indices in providing information about the proximity of voltage instability of a power system. Three simple voltage stability indices are proposed and their effectiveness is compared with some of the recently proposed indices. The comparison is carried out over a wide range of system operating conditions by changing the load power factor and feeder X/R ratios. Test results for the IEEE 57 bus and IEEE 118 bus system are presented. (author)

  6. Segmental stabilization and muscular strengthening in chronic low back pain: a comparative study

    OpenAIRE

    França, Fábio Renovato; Burke, Thomaz Nogueira; Hanada, Erica Sato; Marques, Amélia Pasqual

    2010-01-01

    OBJECTIVE: To contrast the efficacy of two exercise programs, segmental stabilization and strengthening of abdominal and trunk muscles, on pain, functional disability, and activation of the transversus abdominis muscle (TrA), in individuals with chronic low back pain. DESIGN: Our sample consisted of 30 individuals, randomly assigned to one of two treatment groups: segmental stabilization, where exercises focused on the TrA and lumbar multifidus muscles, and superficial strengthening, where ex...

  7. Ab initio study of effects of substitutional additives on the phase stability of γ-alumina

    International Nuclear Information System (INIS)

    Jiang Kaiyun; Music, Denis; Sarakinos, Kostas; Schneider, Jochen M

    2010-01-01

    Using ab initio calculations, we have evaluated two structural descriptions of γ-Al 2 O 3 , spinel and tetragonal hausmannite, and explored the relative stability of γ-Al 2 O 3 with respect to α-Al 2 O 3 with 2.5 at.% of Si, Cr, Ti, Sc, and Y additives to identify alloying element induced electronic structure changes that impede the γ to α transition. The total energy calculations indicate that Si stabilizes γ-Al 2 O 3 , while Cr stabilizes α-Al 2 O 3 . As Si is added, a bond length increase in α-Al 2 O 3 is observed, while strong and short Si-O bonds are formed in γ-Al 2 O 3 , consequently stabilizing this phase. On the other hand, Cr additions induce a smaller bond length increase in α-Al 2 O 3 than in γ-Al 2 O 3 , therefore stabilizing the α-phase. The bulk moduli of γ-Al 2 O 3 with these additives show no significant changes. The phase stability and elastic property data discussed here underline the application potential of Si alloyed γ-Al 2 O 3 for applications at elevated temperatures. Furthermore it is evident that the tetragonal hausmannite structure is a suitable description for γ-Al 2 O 3 .

  8. Accelerated Stability Studies on Dried Extracts of Centella asiatica Through Chemical, HPLC, HPTLC, and Biological Activity Analyses.

    Science.gov (United States)

    Kaur, Ishtdeep; Suthar, Nancy; Kaur, Jasmeen; Bansal, Yogita; Bansal, Gulshan

    2016-10-01

    Regulatory guidelines recommend systematic stability studies on a herbal product to establish its shelf life. In the present study, commercial extracts (Types I and II) and freshly prepared extract (Type III) of Centella asiatica were subjected to accelerated stability testing for 6 months. Control and stability samples were evaluated for organoleptics, pH, moisture, total phenolic content (TPC), asiatic acid, kaempherol, and high-performance thin layer chromatography fingerprints, and for antioxidant and acetylcholinesterase inhibitory activities. Markers and TPC and both the activities of each extract decreased in stability samples with respect to control. These losses were maximum in Type I extract and minimum in Type III extract. Higher stability of Type III extract than others might be attributed to the additional phytoconstituents and/or preservatives in it. Pearson correlation analysis of the results suggested that TPC, asiatic acid, and kaempferol can be taken as chemical markers to assess chemical and therapeutic shelf lives of herbal products containing Centella asiatica. © The Author(s) 2016.

  9. Numerical Study of Flame Stabilization Mechanism in a Premixed Burner with LES Non-adiabatic Flamelet Approach

    Science.gov (United States)

    Tang, Yihao; Hassanaly, Malik; Raman, Venkat

    2015-11-01

    In the development of highly efficient gas turbine combustion system, using high-hydrogen-content fuels is a new solution that limits pollutant emissions but also triggers flame stabilization issues. One promising concept to handle such instabilities within a large range of operating conditions is the FLOX® burner. A noticeable feature of the FLOX® burner is that it discharges high momentum jets without swirl, and flame stabilization is achieved in the shear layer around the jets. Experimental investigations have concluded that low velocity zones were absent and the flashback propensity was effectively decreased. It is proposed to study the stabilization mechanism to understand what physical phenomena are decisive in the process. In a preliminary numerical study, an adiabatic flamelet table was used along with LES simulations. Although the flow field's main features were captured, the simulation had issues in accurately predicting some important thermochemical quantities, including near wall quenching effects and OH mass fraction distribution. This work focuses on the effect of the adiabatic hypothesis on the flame stabilization mechanism. A non-adiabatic flamelet model is implemented and the impact on the stabilization mechanism is being quantified.

  10. Stability study of Azure B, Eosin Y and commercial Romanowsky Giemsa stock solutions using high performance liquid chromatography.

    Science.gov (United States)

    Van Liedekerke, B M; Nelis, H J; Wittekind, D H; De Leenheer, A P

    1991-04-01

    The stability of Azure B and Eosin Y in stock solutions of the individual compounds as well as in mixtures of the two dyes was studied. The purpose of the study of these two essential constituents of the Romanowsky Giemsa stain, commonly used in cytology and histology, was to select a stable mixture as a definitive stock solution. Two specific high performance liquid chromatographic methods were used to monitor qualitative and quantitative changes in solutions. Several parameters influencing the stability of Azure B were examined e.g. the type of counter ion, the presence of Eosin Y and the type of solvent used. The second part focused on the stability of Eosin Y in mixtures with different cationic dyes submitted to high temperatures. In conclusion, an Azure B SCN-Eosin Y acid mixture in dimethylsulphoxide (concentrations 0.75% and 0.12%, respectively) was selected as being the most appropriate composition of a stock solution for the Romanowsky Giemsa stain.

  11. Dynamic intraligamentary stabilization versus conventional ACL reconstruction: A matched study on return to work.

    Science.gov (United States)

    Bieri, Kathrin S; Scholz, Stefan M; Kohl, Sandro; Aghayev, Emin; Staub, Lukas P

    2017-06-01

    The dynamic intraligamentary stabilization (DIS) technique is based on a different treatment approach than ACL reconstruction in that it intends to promote self-healing of the ligament. It is only recommended for acute injuries (work incapacity, revision rates, secondary arthroscopies, and treatment costs during recovery. The study was a post-hoc analysis of prospectively collected data in the Swiss National Accident Insurance Fund (SUVA) database. All registered DIS cases treated until 31 December 2012 were included in the study. ACLR cases were matched to DIS cases using a propensity score approach and analysed in a follow-up period of 2 years after injury. Paired Student's T-test and the Chi-square test were used to compare the outcome measures. All 53 DIS patients were matched to an ACLR pair. The mean time period from injury to surgery was 14days for DIS and 50days for ACLR (pwork incapacity was 13% for DIS and 17% for ACLR resulting in a difference of nearly 1 month of absence from work (p=0.03). The course of postoperative work incapacity was very similar between the groups, while the work incapacity prior to surgery lower in the DIS group. We found no difference in treatment costs, secondary arthroscopies and revision rates. DIS patients benefited from nearly one month shorter absence from work than ACLR patients. This difference is likely related to the early surgical timing that is recommended for DIS. Since no differences were found between DIS and ACLR in terms of treatment costs, secondary arthroscopies and revision rates, the study supports the choice of DIS as an additional treatment option for acute ACL injuries. Further comparative studies are proposed to improve the evidence about optimal timing and best practice in ACL treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Study on headland-bay sandy coast stability in South China coasts

    Science.gov (United States)

    Yu, Ji-Tao; Chen, Zi-Shen

    2011-03-01

    Headland-bay beach equilibrium planform has been a crucial problem abroad to long-term sandy beach evolution and stabilization, extensively applied to forecast long-term coastal erosion evolvement and the influences of coastal engineering as well as long-term coastal management and protection. However, little concern focuses on this in China. The parabolic relationship is the most widely used empirical relationship for determining the static equilibrium shape of headland-bay beaches. This paper utilizes the relation to predict and classify 31 headland-bay beaches and concludes that these bays cannot achieve the ultimate static equilibrium planform in South China. The empirical bay equation can morphologically estimate beach stabilization state, but it is just a referential predictable means and is difficult to evaluate headland-bay shoreline movements in years and decades. By using Digital Shoreline Analysis System suggested by USGS, the rates of shoreline recession and accretion of these different headland-bay beaches are quantitatively calculated from 1990 to 2000. The conclusions of this paper include that (a) most of these 31 bays maintain relatively stable and the rates of erosion and accretion are relatively large with the impact of man-made constructions on estuarine within these bays from 1990 to 2000; (b) two bays, Haimen Bay and Hailingshan Bay, originally in the quasi-static equilibrium planform determined by the parabolic bay shape equation, have been unstable by the influence of coastal engineering; and (c) these 31 bays have different recession and accretion characters occurring in some bays and some segments. On the one hand, some bays totally exhibit accretion, but some bays show erosion on the whole. Shanwei Bay, Houmen Bay, Pinghai Bay and Yazhou Bay have the similar planforms, characterized by less accretion on the sheltering segment and bigger accretion on the transitional and tangential segments. On the other hand, different segments of some

  13. Study of Local and Distortional Stability of Thin-Walled Structures

    Directory of Open Access Journals (Sweden)

    Imene Mahi

    2018-01-01

    Full Text Available Thin-walled structures have an increasingly large and growing field of application in the engineering sector, the goal behind using this type of structure is efficiency in terms of resistance and cost, however the stability of its components (the thin walls remains the first aspect of the behavior, and a primordial factor in the design process. The hot rolled sections are known by a consequent post-buckling reserve, cold-formed steel sections which are thin-walled elements also benefit, in this case, it seems essential to take into account the favorable effects of this reserve in to the verification procedure of the resistance with respect to the three modes of failures of this type of structure. The design method that takes into account this reserve of resistance is inevitably the effective width method. The direct strength method has been developed to improve the speed and efficiency of the design of thin-walled profiles. The latter mainly uses the buckling loads (for Local, Distortional and Global mode obtained from a numerical analysis and the resistance curves calibrated experimentally to predict the ultimate load of the profile. Among those, the behavior of a set of Cshaped profiles (highly industrialized is studied, this type of section is assumed to be very prone to modes of local and distortional instability. The outcome of this investigation revealed very relevant conclusions both scientifically and practically.

  14. Results of a Saxitoxin Proficiency Test Including Characterization of Reference Material and Stability Studies

    Directory of Open Access Journals (Sweden)

    Kirsi Harju

    2015-11-01

    Full Text Available A saxitoxin (STX proficiency test (PT was organized as part of the Establishment of Quality Assurance for the Detection of Biological Toxins of Potential Bioterrorism Risk (EQuATox project. The aim of this PT was to provide an evaluation of existing methods and the European laboratories’ capabilities for the analysis of STX and some of its analogues in real samples. Homogenized mussel material and algal cell materials containing paralytic shellfish poisoning (PSP toxins were produced as reference sample matrices. The reference material was characterized using various analytical methods. Acidified algal extract samples at two concentration levels were prepared from a bulk culture of PSP toxins producing dinoflagellate Alexandrium ostenfeldii. The homogeneity and stability of the prepared PT samples were studied and found to be fit-for-purpose. Thereafter, eight STX PT samples were sent to ten participating laboratories from eight countries. The PT offered the participating laboratories the possibility to assess their performance regarding the qualitative and quantitative detection of PSP toxins. Various techniques such as official Association of Official Analytical Chemists (AOAC methods, immunoassays, and liquid chromatography-mass spectrometry were used for sample analyses.

  15. Development of lycopene-loaded lipid-core nanocapsules: physicochemical characterization and stability study

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Priscilla Pereira dos [Universidade Federal do Rio Grande do Sul (UFRGS), Instituto de Ciência e Tecnologia de Alimentos (Brazil); Paese, Karina; Guterres, Silvia Stanisçuaski [Universidade Federal do Rio Grande do Sul, Programa de Pós-Graduação em Ciências Farmacêuticas, Faculdade de Farmácia (Brazil); Pohlmann, Adriana Raffin [Universidade Federal do Rio Grande do Sul (UFRGS), Departamento de Química Orgânica, Instituto de Química (Brazil); Costa, Tania Hass [Universidade Federal do Rio Grande do Sul (UFRGS), Departamento de Química, Instituto de Química (Brazil); Jablonski, André [Universidade Federal do Rio Grande do Sul (UFRGS), Departamento de Engenharia de Minas (Brazil); Flôres, Simone Hickmann; Rios, Alessandro de Oliveira, E-mail: alessandro.rios@ufrgs.br [Universidade Federal do Rio Grande do Sul (UFRGS), Instituto de Ciência e Tecnologia de Alimentos (Brazil)

    2015-02-15

    The objective of this study was to develop lycopene-loaded lipid-core nanocapsules (Lyc-LNCs) by the interfacial deposition of preformed poly(ε-caprolactone) (PCL). Lyc extract (93.9 %) was obtained from tomatoes, and the organic phase was prepared with polymer (PCL), caprylic/capric triglycerides, sorbitan monostearate, and Lyc in a mixture of acetone and ethanol under magnetic stirring at 40 °C. The organic phase was injected into an aqueous phase containing polysorbate 80, and the suspension was concentrated under reduced pressure. The formulation with a Lyc concentration of 85 µg/mL was characterized in terms of size distribution, zeta potential, encapsulation efficiency, pH, viscosity, and color. The Lyc-LNC formulation presented stable values for the z-average (193 ± 4.7 nm) and zeta potential (−11.5 ± 0.40 mV). Despite the lower pH, Lyc content, and color change of the suspension, the nanocapsules showed satisfactory stability, presenting around 50 % Lyc content after 14 days of storage at room temperature (25 °C)

  16. Quantum chemical study on the stability of honeybee queen pheromone against atmospheric factors.

    Science.gov (United States)

    Shi, Rongwei; Liu, Fanglin

    2016-06-01

    The managed honeybee, Apis mellifera, has been experienced a puzzling event, termed as colony collapse disorder (CCD), in which worker bees abruptly disappear from their hives. Potential factors include parasites, pesticides, malnutrition, and environmental stresses. However, so far, no definitive relationship has been established between specific causal factors and CCD events. Here we theoretically test whether atmospheric environment could disturb the chemical communication between the queen and their workers in a colony. A quantum chemistry method has been used to investigate for the stability of the component of A. mellifera queen mandibular pheromone (QMP), (E)-9-keto-2-decenoic acid (9-ODA), against atmospheric water and free radicals. The results show that 9-ODA is less likely to react with water due to the high barrier heights (~36.5 kcal · mol(-1)) and very low reaction rates. However, it can easily react with triplet oxygen and hydroxyl radicals because of low or negative energy barriers. Thus, the atmospheric free radicals may disturb the chemical communication between the queen and their daughters in a colony. Our pilot study provides new insight for the cause of CCD, which has been reported throughout the world.

  17. Stability and generalization in seed dispersal networks: a case study of frugivorous fish in Neotropical wetlands.

    Science.gov (United States)

    Correa, Sandra Bibiana; Arujo, Joisiane K; Penha, Jerry; Nunes da Cunha, Catia; Bobier, Karen E; Anderson, Jill T

    2016-08-31

    When species within guilds perform similar ecological roles, functional redundancy can buffer ecosystems against species loss. Using data on the frequency of interactions between fish and fruit, we assessed whether co-occurring frugivores provide redundant seed dispersal services in three species-rich Neotropical wetlands. Our study revealed that frugivorous fishes have generalized diets; however, large-bodied fishes had greater seed dispersal breadth than small species, in some cases, providing seed dispersal services not achieved by smaller fish species. As overfishing disproportionately affects big fishes, the extirpation of these species could cause larger secondary extinctions of plant species than the loss of small specialist frugivores. To evaluate the consequences of frugivore specialization for network stability, we extracted data from 39 published seed dispersal networks of frugivorous birds, mammals and fish (our networks) across ecosystems. Our analysis of interaction frequencies revealed low frugivore specialization and lower nestedness than analyses based on binary data (presence-absence of interactions). In that case, ecosystems may be resilient to loss of any given frugivore. However, robustness to frugivore extinction declines with specialization, such that networks composed primarily of specialist frugivores are highly susceptible to the loss of generalists. In contrast with analyses of binary data, recently developed algorithms capable of modelling interaction strengths provide opportunities to enhance our understanding of complex ecological networks by accounting for heterogeneity of frugivore-fruit interactions. © 2016 The Author(s).

  18. Studies on the power systems stability; Estudios de estabilidad en sistemas de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Inda Ruiz, Adrian; Calderon Guizar, Jorge Guillermo; Friaga Vargas, Jose Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    One of the everyday problems that the electric power systems (EPS), is related to the dynamic response of these in face of the occurrence of disturbs. The computer tool needed to perform studies of this kind in the current EPS, requires the efficient conjunction of advanced modeling, simulation and programming techniques to make its use practical and useful. In this article are presented the advances achieved by the Power Nets Analysis Department in the development of a digital package for the stability analysis of the electric power systems [Espanol] Uno de los problemas cotidianos que el ingeniero de potencia debe enfrentar tanto en la fase de planeacion como en la de operacion de los sistemas electricos de potencia (SEP) es el relacionado con la respuesta dinamica de estos ante la ocurrencia de disturbios. La herramienta computacional necesaria para realizar estudios de esta naturaleza en los actuales SEP requiere de la conjugacion eficiente de tecnicas avanzadas de modelacion, simulacion y programacion para hacer su empleo practico y util. En este articulo se presentan los avances logrados por el Departamento de Analisis de Redes en el desarrollo de un paquete digital para el analisis de estabilidad en los sistemas electricos de potencia.

  19. In vitro study of color stability of polycrystalline and monocrystalline ceramic brackets

    Science.gov (United States)

    de Oliveira, Cibele Braga; Maia, Luiz Guilherme Martins; Santos-Pinto, Ary; Gandini Júnior, Luiz Gonzaga

    2014-01-01

    Objective The aim of this in vitro study was to analyze color stability of monocrystalline and polycrystalline ceramic brackets after immersion in dye solutions. Methods Seven ceramic brackets of four commercial brands were tested: Two monocrystalline and two polycrystalline. The brackets were immersed in four dye solutions (coffee, red wine, Coke and black tea) and in artificial saliva for the following times: 24 hours, 7, 14 and 21 days, respectively. Color changes were measured by a spectrophotometer. Data were assessed by Multivariate Profile Analysis, Analysis of Variance (ANOVA) and Multiple Comparison Tests of means. Results There was a perceptible change of color in all ceramic brackets immersed in coffee (ΔE* Allure = 7.61, Inspire Ice = 6.09, Radiance = 6.69, Transcend = 7.44), black tea (ΔE* Allure = 6.24, Inspire Ice = 5.21, Radiance = 6.51, Transcend = 6.14) and red wine (ΔE* Allure = 6.49, Inspire Ice = 4.76, Radiance = 5.19, Transcend = 5.64), but no change was noticed in Coke and artificial saliva (ΔE coffee, black tea and red wine. However, the same crystalline structure, either monocrystalline or polycrystalline, do not follow the same or a similar pattern in color change, varying according to the bracket fabrication, which shows a lack of standardization in the manufacturing process. Coffee dye produced the most marked color changes after 21 days of immersion for most ceramic brackets evaluated. PMID:25279530

  20. Study on Strength Behavior of Organic Soil Stabilized with Fly Ash

    Directory of Open Access Journals (Sweden)

    Bayshakhi Deb Nath

    2017-01-01

    Full Text Available The aim of this study is to investigate the effect of fly ash on the consistency, compactness, acidic properties, and strength of organic soil. The presence of organic content in the soil has detrimental impacts on the physical and strength behavior of soil. To investigate the effectiveness of fly ash in the stabilization of organic soil, two types of fly ashes (Type I and Type II at different percentages were used. It is found that fly ash significantly reduces the plasticity index of the organic soil, whereas the liquid and plastic limits increase. The dry density of the fly ash-soil mixture increases significantly, while the water requirement reduces due to the addition of fly ash. The increase of dry density compromises higher strength. The increase of qu with the increase of fly ash content is mainly due to the pozzolanic reaction of fly ash, although the reduction in water content results from the addition of dry fly ash solid. Moreover, Type I fly ash contributes a higher value of qu compared to Type II fly ash. This is attributed to the characteristics of fly ash including CaO and CaO/SiO2 ratio.

  1. Unloading performances and stabilizing practices for columnar jointed basalt: A case study of Baihetan hydropower station

    Directory of Open Access Journals (Sweden)

    Qixiang Fan

    2017-12-01

    Full Text Available The columnar jointed rock mass (CJR, composed of polygonal cross-sectional columns cut by several groups of joints in various directions, was exposed during the excavations of the Baihetan hydropower station, China. In order to investigate the unloading performances and the stability conditions during excavation of the columns, an experimental field study was performed. Firstly, on-site investigations indicated that the geotechnical problems, including rock relaxation, cracking and collapse, were the most prominent for the CJR Class I that contains intensive joint network and the smallest column sizes. Comprehensive field tests, including deformation measurement by multi-point extensometers, ultrasonic wave testing, borehole television observation and stress monitoring of rock anchors, revealed that the time-dependent relaxation of the CJRs was marked. The practical excavation experiences for the Baihetan columnar jointed rock masses, such as blasting scheme, supporting time of shotcrete and rock bolts, were presented in the excavations of the diversion tunnels. These detailed investigations and practical construction experiences can provide helpful information for similar geotechnical works in jointed rock mass.

  2. The first-principle study on the stability of trans-HCOH in various solvents

    Science.gov (United States)

    Nur Fadilla, Rizka; Dwi Aisyah, Nufida; Dipojono, Hermawan K.; Rusydi, Febdian

    2017-05-01

    We attempt to study about the solvent effects of the stability of trans-HCOH molecules using the density-functional theory. Experimentally, trans-HCOH rearranges to H2CO with half-life of two hours [1] which we theoretically proved that it occurs through quantum tunneling. [2] In this work, we calculate the rearrangement rate of the molecules in various solvents. The solvents are selected based on their dielectric constant values, from lower to higher ones; they are benzene, dichloroethane, benzaldehyde, acetone, methanol, ethanediol, dimethylsulfoxide, formic acid, water, and formamide. We use polarizable continuum to model the solvents (PCM). We begin from determining the reaction path from trans-HCOH to H2CO and its corresponding energy barrier using intrinsic reaction coordinate calculation with PCM. Then, we use Wentzel-Kramers-Brillouin (WKB) approximation to calculate the rearrangement rates. The calculation results showed a general trend in which there were arrangement rate was decreasing inversely proportional to dielectric constant value.

  3. Structure and defect studies of In2O3:Zn,Zr for higher stability TCO

    Science.gov (United States)

    Herwadkar, Aditi; Kim, Kwiseon

    2010-03-01

    The defects structures among the transparent conducting oxides (TCO) plays a major role in determining stability of the oxide over a temperature range and in tuning electrical and optical properties for the different TCO applications In2O3 crystallizes in the cubic bixbyite structure. The structure can be derived from the related fluorite structure by removing one fourth of the anions and allowing for small shifts of the ionic positions. In2O3 has two non-equivalent six-fold coordinated cation sites. For one of the sites, the cation is bounded by two structural vacancy along the body diagonal and for the other non-equivalent site the vacancies lie along the face diagonal. These vacancies are actually empty oxygen vacancy positions. Indium is in +3 charge state. ZnO on the other hand crystallizes to form wurtzite structure with four-fold coordination for Zn and is in +2 charge state where as the crystal structure of ZrO is rulite with Zr in +4 charge state and is four fold coordinated. Co-doping of Zn and Zr with each substituting the In atom satisfies the octet rule and is lower in energy then the individual substitutions with overall neutrality. The formation enthalpy as a function of pair (Zn, Zr) shows a minimum at experimental composition of In2(Zn,Zr)3O24. We in this work present the electronic structure optimization and study the defect states in this material.

  4. Study of the mechanical stability of the ATLAS Insertable B-Layer

    CERN Document Server

    The ATLAS collaboration

    2015-01-01

    During the commissioning and alignment of the ATLAS Insertable B-Layer (IBL) using cosmic-ray data, a mechanical distortion of the IBL was observed. This distortion is caused by a difference in the coefficients of thermal expansion of the IBL stave components. The results of a preliminary study of the mechanical stability of the IBL are presented in this note. The qualitative properties of the distortion are confirmed using a 3D finite element analysis. Using cosmic-ray data collected in March 2015, the magnitude of the distortion is found to depend linearly on the operating temperature of the IBL, with a gradient of $\\sim10~{\\rm \\mu m/K}$. The peak-to-peak temperature variation of the IBL staves is measured to be less than 0.2 K during the same cosmic-ray run. The expected bias to the transverse impact parameter $(d_{0})$ of charged tracks under a temperature variation of 0.2 K is evaluated to be $\\sim 1~{\\rm \\mu m}$ using $Z\\rightarrow{\\mu^+\\mu^-}$ events from a Mote Carlo simulation of proton-proton collis...

  5. Structure and stability of hcp iron carbide precipitates: A first-principles study

    Directory of Open Access Journals (Sweden)

    C.M. Fang

    2017-09-01

    Full Text Available Hexagonal close-packed (hcp iron carbides play an important role in steel processing and in steel products. The recent discovery of novel ultrafine (2–5 nm iron carbide (ε'-Fe2+xC precipitates in TRIP steel sheds a new light on the hcp family of carbides. Here we present a first-principles study on the relative stability, and the electronic, magnetic properties of the ε'-Fe2C phases. Different stackings of Fe-sheets and orderings of C atoms were investigated and compared with experimental data and with Jack’s model. We find very favorable formation enthalpies for these new members of the hcp family, and we present a first-principles-refined model for the crystal structure of the ultrafine Fe(C precipitates. These findings are useful for the characterization of nano-sized iron carbide precipitates, for understanding their role in the microstructure of steels, and for the design of novel steels having even more desirable properties.

  6. Biomechanical comparison of different stabilization constructs for unstable posterior wall fractures of acetabulum. A cadaveric study.

    Science.gov (United States)

    Zhang, Yuntong; Tang, Yang; Wang, Panfeng; Zhao, Xue; Xu, Shuogui; Zhang, Chuncai

    2013-01-01

    Operative treatment of unstable posterior wall fractures of acetabulum has been widely recommended. This laboratory study was undertaken to evaluate static fixation strength of three common fixation constructs: interfragmentary screws alone, in combination with conventional reconstruction plate, or locking reconstruction plate. Six formalin-preserved cadaveric pelvises were used for this investigation. A posterior wall fracture was created along an arc of 40-90 degree about the acetabular rim. Three groups of different fixation constructs (two interfragmentary screws alone; two interfragmentary screws and a conventional reconstruction plate; two interfragmentary screws and a locking reconstruction) were compared. Pelvises were axial loaded with six cycles of 1500 N. Dislocation of superior and inferior fracture site was analysed with a multidirectional ultrasonic measuring system. No statistically significant difference was found at each of the superior and inferior fracture sites between the three types of fixation. In each group, the vector dislocation at superior fracture site was significantly larger than inferior one. All those three described fixation constructs can provide sufficient stability for posterior acetabular fractures and allow early mobilization under experimental conditions. Higher posterior acetabular fracture line, transecting the weight-bearing surface, may indicate a substantial increase in instability, and need more stable pattern of fixation.

  7. Biomechanical comparison of different stabilization constructs for unstable posterior wall fractures of acetabulum. A cadaveric study.

    Directory of Open Access Journals (Sweden)

    Yuntong Zhang

    Full Text Available PURPOSE: Operative treatment of unstable posterior wall fractures of acetabulum has been widely recommended. This laboratory study was undertaken to evaluate static fixation strength of three common fixation constructs: interfragmentary screws alone, in combination with conventional reconstruction plate, or locking reconstruction plate. METHODS: Six formalin-preserved cadaveric pelvises were used for this investigation. A posterior wall fracture was created along an arc of 40-90 degree about the acetabular rim. Three groups of different fixation constructs (two interfragmentary screws alone; two interfragmentary screws and a conventional reconstruction plate; two interfragmentary screws and a locking reconstruction were compared. Pelvises were axial loaded with six cycles of 1500 N. Dislocation of superior and inferior fracture site was analysed with a multidirectional ultrasonic measuring system. RESULTS: No statistically significant difference was found at each of the superior and inferior fracture sites between the three types of fixation. In each group, the vector dislocation at superior fracture site was significantly larger than inferior one. CONCLUSIONS: All those three described fixation constructs can provide sufficient stability for posterior acetabular fractures and allow early mobilization under experimental conditions. Higher posterior acetabular fracture line, transecting the weight-bearing surface, may indicate a substantial increase in instability, and need more stable pattern of fixation.

  8. Study of crystallite size of yttria-stabilized zirconia powders by Rietveld method

    International Nuclear Information System (INIS)

    Leite, Wellington Claiton; Brinatti, Andre Mauricio; Ribeiro, Mauricio Aparecido; Andrade, Andre Vitor Chaves de; Chinelatto, Adriana Scoton Antonio; Chinelatto, Adilson Luiz

    2009-01-01

    The yttria-stabilized zirconia (YSZ) is used in a great variety of applications, for example, electrolytes of solid oxide fuel cells and oxygen sensors. In the study of YSZ, the particle size powders and sintering processes are important to define the final properties of the zirconia products. The objectives of this work were to determine the phases and the crystalline size using X-Ray Diffraction (XRD) data and the Rietveld Method (RM) of the YSZ powders obtained by chemical synthesis based on the Pechini method. It was used ZrOCl 2.8 H 2 O and Y(NO 3 ) 3.5 H 2 O as precursors reagents. After calcination at 550 deg C during 24 hours, the powder was analyzed by XRD and scanning electronic microscopy (SEM). From XRD and using Rietveld method were verified that there is only cubic phase with lattice parameter a = 5.1307(1) Å and the space group Fm3m. Due to substitution of the Zr atoms in the Y atoms sites, there were vacancies in 17.72 % of O atoms sites. However, the percentage of substitution of Zr atoms in Y atoms sites in the structure not was determinate because the curves of atomic scattering of them are very similar. Using Scherrer equation and considering anisotropy effect, the average crystalline size was determinate: 10,43 nm (c axis) and 10,39 (b axis). This spherical symmetry also observed for SEM. (author)

  9. The transmission and stability of cultural life scripts: a cross-cultural study.

    Science.gov (United States)

    Janssen, Steve M J; Haque, Shamsul

    2018-01-01

    Cultural life scripts are shared knowledge about the timing of important life events. In the present study, we examined whether cultural life scripts are transmitted through traditions and whether there are additional ways through which they can be attained by asking Australian and Malaysian participants which information sources they had used to generate the life script of their culture. Participants hardly reported that they had used cultural and religious traditions. They more often reported that they had used their own experiences and experiences of relatives and friends. They also reported the use of comments of relatives and friends and the use of newspapers, books, movies and television programmes. Furthermore, we examined the stability of life scripts and similarities and differences across cultures. We found that life scripts are stable cognitive structures and that there are, besides cross-cultural differences in the content, small cross-cultural differences in the valence and distribution of life script events, with the Australian life script containing more positive events and more events expected to occur before the age of 16.

  10. Moessbauer study of austenite stability and impact fracture in Fe--6Ni steel

    International Nuclear Information System (INIS)

    Fultz, B.T.

    1978-06-01

    The two phase (α + γ) microstructure of a commercial cryogenic alloy steel was studied with regard to possible phase transformations induced by impact fracture. A backscatter Moessbauer spectrometer was constructed for measurements of atomic fractions of the two phases near specimen surfaces. Moessbauer spectra were collected from several types of unpolished and chemically polished surfaces of impact specimens to reveal (for the first time) the depth profile of the observed γ → α' transformation near fracture surfaces. It was found that the spatial extent of transformation could be monotonically related to the impact energy absorbed by the specimen. These results are interpreted in light of several models of phase stability and impact toughness. A general description of the Moessbauer effect and methods of spectral analysis is included. The method of linear perturbations in the hyperfine magnetic field is discussed with respect to its general usefulness in obtaining chemical information for Moessbauer spectra of the α phase. The procedure adopted for spectral analysis was chosen to provide an accurate phase analysis at the expense of chemical information. Both the Moessbauer equipment and analysis procedures were developed with the primary objective of providing a routine metallurgical phase analysis technique for low alloy steels

  11. HR-EELS study of hydrogen bonding configuration, chemical and thermal stability of detonation nanodiamond films

    Energy Technology Data Exchange (ETDEWEB)

    Michaelson, Sh.; Akhvlediani, R. [Schulich Faculty of Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel); Petit, T.; Girard, H.A.; Arnault, J.C. [CEA, LIST, Diamond Sensors Laboratory, F-91191 Gif sur Yvette (France); Hoffman, A., E-mail: choffman@tx.technion.ac.il [Schulich Faculty of Chemistry, Technion-Israel Institute of Technology, Haifa 32000 (Israel)

    2014-06-01

    Nano-diamond films composed of 3–10 nm grains prepared by the detonation method and deposited onto silicon substrates by drop-casting were examined by high resolution electron energy loss spectroscopy (HR-EELS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and secondary ion mass spectroscopy (SIMS). The impact of (i) ex-situ ambient annealing at 400 °C and (ii) ex-situ hydrogenation on hydrogen bonding and its thermal stability were examined. In order to clarify the changes in hydrogen bonding configuration detected on the different surfaces as a function of thermal annealing, in-situ hydrogenation by thermally activated atomic hydrogen was performed and examined. This study provides direct evidence that the exposure to ambient conditions and medium temperature ambient annealing have a pronounced effect on the hydrogen-carbon bonding configuration onto the nano-diamond surfaces. In-situ 1000 °C annealing results in irreversible changes of the film surface and partial nano-diamond silicidation.

  12. [Study of a lysis medium stabilizing microfilaments and microtubules in vitro and in vivo].

    Science.gov (United States)

    Foucault, G; Raymond, M N; Coffe, G; Pudles, J

    1984-01-01

    Determination of experimental conditions which allow the evaluation of the variations in the ratio of non polymerized and polymerized forms of actin and tubulin during the reorganization of the cytoskeletal cell system is of most valuable importance. In order to prepare cell homogenates which would reflect the in vivo situation, we tested in vitro a lysis medium which stabilized both microfilaments and microtubules, which were determined by DNase inhibition assays and colchicine binding assays respectively. This lysis medium containing 10 mM potassium phosphate, 1mM magnesium chloride, 5 mM EGTA, 1 M hexylene glycol, 1% Triton X-100, pH 6.4, used at 4 degrees C a) diffused rapidly into the cells; b) did not denature actin and tubulin; c) did not displace the equilibrium between non polymerized and polymerized forms of actin and tubulin, allowing biochemical assays on cell homogenates; d) blocked the evolution of the cytoskeletal system and permitted structural studies; e) and allowed the decoration of microfilaments by heavy meromyosin.

  13. An in silico study of the molecular basis of B-RAF activation and conformational stability

    Directory of Open Access Journals (Sweden)

    Jónsdóttir Svava

    2009-07-01

    Full Text Available Abstract Background B-RAF kinase plays an important role both in tumour induction and maintenance in several cancers and it is an attractive new drug target. However, the structural basis of the B-RAF activation is still not well understood. Results In this study we suggest a novel molecular basis of B-RAF activation based on molecular dynamics (MD simulations of B-RAFWT and the B-RAFV600E, B-RAFK601E and B-RAFD594V mutants. A strong hydrogen bond network was identified in B-RAFWT in which the interactions between Lys601 and the well known catalytic residues Lys483, Glu501 and Asp594 play an important role. It was found that several mutations, which directly or indirectly destabilized the interactions between these residues within this network, contributed to the changes in B-RAF activity. Conclusion Our results showed that the above mechanisms lead to the disruption of the electrostatic interactions between the A-loop and the αC-helix in the activating mutants, which presumably contribute to the flipping of the activation segment to an active form. Conversely, in the B-RAFD594V mutant that has impaired kinase activity, and in B-RAFWT these interactions were strong and stabilized the kinase inactive form.

  14. The Short Effects of Two Spinal Stabilization Exercise on Balance Tests and Limit of Stability in Men with Non–Specific Chronic Low Back Pain: Randomized Clinical Trial Study

    Directory of Open Access Journals (Sweden)

    Zahra Ya'ghoubi

    2012-04-01

    Full Text Available Objective: This study investigated the short-term effects of two stability exercises, including Abdominal Hollowing and Abdominal bracing on stabilization parameters of Biodex Stability System in male subjects with non-specific recurrent low back pain. Materials & Methods: This Randomized Clinical Trial and case–control study was performed on 30 male subjects with non-specific recurrent low back pain by sample of convenience and randomly allocated into 3 control group( 10 subject and 2 experimental group (10 subject. Dynamic balance stability indices (Overall, Anterior–Posterior and Medial–Lateral and Limit of Stability were measured by using Biodex Stability System before and immediately after exercise. Results: Our finding showed that all indices except with Medial–Lateral were increased significantly in experimental group in comparison with control. In Abdominal Bracing group, both level of stability of 8 and 3, showed a significant reduction (P<0.05. The limit of Stability in both experimental groups with abdominal Hallowing (P=0.001 and Abdominal Bracing (P=0.01 increased significantly. Conclusion: The findings revealed that one session training enhances balance status, due to muscle activity improvement.

  15. Tank Waste Transport Stability: Summaries of Hanford Slurry and Salt-Solution Studies in FY 2000

    Energy Technology Data Exchange (ETDEWEB)

    Welch, T.D.

    2002-07-08

    This report is a collection of summary articles on FY 2000 studies of slurry transport and salt-well pumping related to Hanford tank waste transfers. These studies are concerned with the stability (steady, uninterrupted flow) of tank waste transfers, a subset of the Department of Energy (DOE) Tanks Focus Area Tank (TFA) Waste Chemistry effort. This work is a collaborative effort of AEA Technology plc, the Diagnostic Instrumentation and Analysis Laboratory at Mississippi State University (DIAL-MSU), the Hemispheric Center for Environmental Technology at Florida International University (HCET-FIU), Numatec Hanford Corporation (NHC), and the Oak Ridge National Laboratory (ORNL). The purpose of this report is to provide, in a single document, an overview of these studies to help the reader identify contacts and resources for obtaining more detailed information and to help promote useful interchanges between researchers and users. Despite over 50 years of experience in transporting radioactive tank wastes to and from equipment and tanks at the Department of Energy's Hanford, Savannah River, and Oak Ridge sites, waste slurry transfer pipelines and process piping become plugged on occasion. At Hanford, several tank farm pipelines are no longer in service because of plugs. At Savannah River, solid deposits in the outlet line of the 2H evaporator have resulted in an unplanned extended downtime. Although waste transfer criteria and guidelines intended to prevent pipeline plugging are in place, they are not always adequate. To avoid pipeline plugging in the future, other factors that are not currently embodied in the transfer criteria may need to be considered. The work summarized here is being conducted to develop a better understanding of the chemical and waste flow dynamics during waste transfer. The goal is to eliminate pipeline plugs by improving analysis and engineering tools in the field that incorporate this understanding.

  16. Study on stability of rake teeth inserting soil of chain rake type mulching film recovery machine based on Adams

    Science.gov (United States)

    Guo, Wensong; Jian, Jianming; San, Yunlong; Lui, Rui; Li, Gang; Hou, Shulin

    2017-08-01

    Traditional rake type mulching film recycling machine has the problem of difficulty in unloading and packing film, poor continuity of the work. In order to solve such problems, this paper designs a kind of chain rake type mulching film recycling machine which can realize continuous raking film, collecting film, transporting film, shaking off soil, unloading film. Rake teeth is the basic part of chain rake mulching recycling machine. The stability of rake teeth's inserting soil is an important factor to ensure recovery efficiency of the plastic film recovery. By virtual prototype simulation, this paper study the influence of different factors on the stability of rake teeth inserting soil. The results are as follows: The speed of chain rake has no significant effect on the stability of rake teeth inserting soil; Reducing resistance of rake teeth in the process of working, is conducive to improve the stability of rake teeth inserting soil; Appropriate increasing elastic modulus of chain rake, is helpful to enhance the stability of rake teeth inserting soil.

  17. Study on Market Stability and Price Limit of Chinese Stock Index Futures Market: An Agent-Based Modeling Perspective

    Science.gov (United States)

    2015-01-01

    This paper explores a method of managing the risk of the stock index futures market and the cross-market through analyzing the effectiveness of price limits on the Chinese Stock Index 300 futures market. We adopt a cross-market artificial financial market (include the stock market and the stock index futures market) as a platform on which to simulate the operation of the CSI 300 futures market by changing the settings of price limits. After comparing the market stability under different price limits by appropriate liquidity and volatility indicators, we find that enhancing price limits or removing price limits both play a negative impact on market stability. In contrast, a positive impact exists on market stability if the existing price limit is maintained (increase of limit by10%, down by 10%) or it is broadened to a proper extent. Our study provides reasonable advice for a price limit setting and risk management for CSI 300 futures. PMID:26571135

  18. Study on Market Stability and Price Limit of Chinese Stock Index Futures Market: An Agent-Based Modeling Perspective.

    Science.gov (United States)

    Xiong, Xiong; Nan, Ding; Yang, Yang; Yongjie, Zhang

    2015-01-01

    This paper explores a method of managing the risk of the stock index futures market and the cross-market through analyzing the effectiveness of price limits on the Chinese Stock Index 300 futures market. We adopt a cross-market artificial financial market (include the stock market and the stock index futures market) as a platform on which to simulate the operation of the CSI 300 futures market by changing the settings of price limits. After comparing the market stability under different price limits by appropriate liquidity and volatility indicators, we find that enhancing price limits or removing price limits both play a negative impact on market stability. In contrast, a positive impact exists on market stability if the existing price limit is maintained (increase of limit by10%, down by 10%) or it is broadened to a proper extent. Our study provides reasonable advice for a price limit setting and risk management for CSI 300 futures.

  19. Climate Change Impacts on the Stability of Small Tidal Inlets: A Numerical Modelling Study Using the Realistic Analogue Approach

    Directory of Open Access Journals (Sweden)

    Trang Minh Duong

    2012-09-01

    Full Text Available Tidal inlets are of great societal importance as they are often associated with ports and harbours, industry, tourism, recreation and prime waterfront real estate. Their behaviour is governed by the delicate balance of oceanic processes (tides, waves and mean sea level, and fluvial/estuarine processes (riverflow and heat fluxes, all of which can be significantly affected by climate change (CC processes. This study investigates the potential range of CC impacts on the stability (closed/open state and locational stability via the application of a sophisticated process based morphodynamic model (Delft3D to strategically selected schematized inlet morphologies and forcing conditions. Results show that, under worst case scenario conditions, the integrated effect of climate change driven increase in mean sea level, wave height and wave angle may significantly change inlet stability condition.

  20. Optimal Power Flow Based Global Voltage Stability Analysis Using Network Equivalencing Technique: A Case Study of Widespread Sub-Grid

    Directory of Open Access Journals (Sweden)

    Palukuru NAGENDRA

    2010-12-01

    Full Text Available The objective this paper is to develop a methodology to assess the voltage stability considering optimal operating criteria using the concept of equivalencing the multi-bus power system to a two-bus network model and by studying the necessary parameters of the equivalent system. There by, a generalized global voltage stability indicator being developed, it has been applied to a typical longitudinal power supply (LPS system and a robust practical 203-bus Indian Eastern Grid system. Simulation results have proved that this new network equivalent method is promising to assess voltage stability of any power system at any operating point in global scenario. In the equivalent network the generators are modelled more accurately considering economic criteria.

  1. [Stabilization Treatment of Pb and Zn in Contaminated Soils and Mechanism Studies].

    Science.gov (United States)

    Xie, Wei-qiang; Li, Xiao-mingi; Chen, Can; Chen, Xun-feng; Zhong, Yu; Zhong, Zhen-yu; Wan, Yong; Wang, Yan

    2015-12-01

    In the present work, the combined application of potassium dihydrogen phosphate, quick lime and potassium chloride was used to immobilize the Pb and Zn in contaminated soils. The efficiency of the process was evaluated through leaching tests and Tessier sequential extraction procedure. The mechanism of stabilization was analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM) to reveal the mechanism of stabilization. The results showed that the stabilizing efficiency of Pb contaminated soils was above 80% and the leaching concentrations of Pb, Zn were far below the threshold when the ratio of exogenous P and soil (mol · mol⁻¹) was 2:1-4: 1, the dosing ratio of CaO was 0.1%-0.5% ( mass fraction) and the dosage of potassium chloride was 0.02-0. 04 mol. Meanwhile, Pb and Zn in soil were transformed from the exchangeable fraction into residual fraction, which implied that the migration of Pb, Zn in soil could be confined by the stabilization treatment. XRD and SEM analysis revealed that Ca-P-Pb precipitation, lead orthophosphate [PbHP0₄, Pb₃ (PO₄)₂], pyromorphite (Pb-PO₄-Cl/OH) and mixed heavy metal deposits (Fe-PO₄- Ca-Pb-Zn-OH) could be formed after solidification/stabilization in which Pb and Zn could be wrapped up to form a solidified composition and to prevent leaching.

  2. Dynamical Stability and Predictability of Football Players: The Study of One Match

    Directory of Open Access Journals (Sweden)

    Micael S. Couceiro

    2014-01-01

    Full Text Available The game of football demands new computational approaches to measure individual and collective performance. Understanding the phenomena involved in the game may foster the identification of strengths and weaknesses, not only of each player, but also of the whole team. The development of assertive quantitative methodologies constitutes a key element in sports training. In football, the predictability and stability inherent in the motion of a given player may be seen as one of the most important concepts to fully characterise the variability of the whole team. This paper characterises the predictability and stability levels of players during an official football match. A Fractional Calculus (FC approach to define a player’s trajectory. By applying FC, one can benefit from newly considered modeling perspectives, such as the fractional coefficient, to estimate a player’s predictability and stability. This paper also formulates the concept of attraction domain, related to the tactical region of each player, inspired by stability theory principles. To compare the variability inherent in the player’s process variables (e.g., distance covered and to assess his predictability and stability, entropy measures are considered. Experimental results suggest that the most predictable player is the goalkeeper while, conversely, the most unpredictable players are the midfielders. We also conclude that, despite his predictability, the goalkeeper is the most unstable player, while lateral defenders are the most stable during the match.

  3. Study on modulation amplitude stabilization method for PEM based on FPGA in atomic magnetometer

    Science.gov (United States)

    Wang, Qinghua; Quan, Wei; Duan, Lihong

    2017-10-01

    Atomic magnetometer which uses atoms as sensitive elements have ultra-high precision and has wide applications in scientific researches. The photoelastic modulation method based on photoelastic modulator (PEM) is used in the atomic magnetometer to detect the small optical rotation angle of a linearly polarized light. However, the modulation amplitude of the PEM will drift due to the environmental factors, which reduces the precision and long-term stability of the atomic magnetometer. Consequently, stabilizing the PEM's modulation amplitude is essential to precision measurement. In this paper, a modulation amplitude stabilization method for PEM based on Field Programmable Gate Array (FPGA) is proposed. The designed control system contains an optical setup and an electrical part. The optical setup is used to measure the PEM's modulation amplitude. The FPGA chip, with the PID control algorithm implemented in it, is used as the electrical part's micro controller. The closed loop control method based on the photoelastic modulation detection system can directly measure the PEM's modulation amplitude in real time, without increasing the additional optical devices. In addition, the operating speed of the modulation amplitude stabilization control system can be greatly improved because of the FPGA's parallel computing feature, and the PID control algorithm ensures flexibility to meet different needs of the PEM's modulation amplitude set values. The Modelsim simulation results show the correctness of the PID control algorithm, and the long-term stability of the PEM's modulation amplitude reaches 0.35% in a 3-hour continuous measurement.

  4. Stability of dental implants in grafted bone in the anterior maxilla: longitudinal study.

    LENUS (Irish Health Repository)

    Al-Khaldi, Nasser

    2010-06-06

    We aimed to assess the stability over time of dental implants placed in grafted bone in the maxilla using resonance frequency analysis, and to compare the stability of implants placed in grafted and non-grafted bone. Data were collected from 23 patients (15 test and 8 controls) in whom 64 implants (Brånemark system, Nobel Biocare, Göteborg, Sweden) were placed in accordance with the two-stage surgical protocol. In the test group 36 fixtures were placed in grafted bone, and in the control group 28 fixtures were placed in non-grafted bone. Resonance frequency analysis was used to assess the test sites at implant placement and abutment connection. The mean (SD) implant stability quotient (ISQ) for test sites at the time of implant placement was 61.91 (6.68), indicating excellent primary stability, and was 63.53 (5.76) at abutment connection. ISQ values at abutment connection were similar for test and control sites. Implants placed in grafted bone compared favourably with those in non-grafted bone, and showed excellent stability.

  5. Study on the quality and stability of compost through a Demo Compost Plant.

    Science.gov (United States)

    Hasan, K M M; Sarkar, G; Alamgir, M; Bari, Q H; Haedrich, G

    2012-11-01

    This study is concerned with the performance of a Demo Compost Plant for the development of acceptable composting technology in Bangladesh. The Demo Compost Plant was setup at the adjacent area of an existing compost plant located at Khulna city in Bangladesh. Four different composting technologies were considered, where Municipal Solid Waste (MSW) were used as a raw material for composting, collected from the adjacent areas of the plant. Initially the whole composting system was conducted through two experimental setups. In the 1st setup three different types of aerators (horizontal and vertical passively aerator and forced aerator) were selected. For a necessary observation four piles, using only MSW as the input materials in the first three compost pile, the fourth one was the existing Samadhan's compost pile. Based on the analysis of the experimental findings, the horizontal passively aerated composting technique is suitable for Bangladesh as it had better performance for reducing composting period than that of the others. It was being observed from the quality parameters of compost in the both 1st and 2nd setup that as the waste directly come from kitchen, degradation rate of waste shows a positive result for reducing this waste and there is no possibility of toxic contamination, when it would be used as a soil conditioner. Though there is no significant improvement in the quality of the final product in the 2nd setup as comparing with the 1st setup but it fulfills one of the main objectives of this study is to reduce the whole composting period as well as immediate management of the increasing amount of waste and reducing load on landfill. Selfheating tests reveal that degree of stability of compost with respect to maturation period was remained in the acceptable level, which was further accelerated due to the use of organic additives. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Study on long-term stability of geochemical environments at deep underground

    International Nuclear Information System (INIS)

    Mizuno, Takashi; Iwatsuki, Teruki

    2005-01-01

    Observation and fluid inclusion analysis of fracture filling calcites in granite at the Tono area were conducted to assess long-term stability of geochemical environment at deep underground. The result of observation using SEM and luminoscope shows that precipitation processes of calcite can be divided into four phases (1 to 4) based on their occurrence. (1) Phase 1: indistinct morphology and includes the wall rock fragments. (2) Phase 2: rhombohedral and hexagonal form. (3) Phase 3: elongate rhombohedral form, growth over the layer of phase 2 calcite. (4) Phase 4: small rhombohedral form crystals growth from surface of phase 3 calcite. On Phase 1 calcite, it seems to be hydrothermal origin related to fracture activation. Previous study shows the correlation between the salinity of fluid from which calcite precipitated and morphology of calcite. According to previous studies, the groundwater from which phase 3 calcite precipitated would be the highest salinity such as seawater. Phase 2 and 4 calcite may be precipitated from groundwater with low salinity. On the other hand, fluid inclusions were recognized in phase 2 and 3 calcite. All inclusions indicated mono-phase (liquid phase). These suggest that phase 2 and 3 calcites were precipitated in low-temperature condition. Result of salinity analysis indicates that two groundwaters having different chemical properties had existed during phase 2 and 3 calcite precipitation. Based on these results, geochemical environment had changed by input of high salinity groundwater during Phase 2 and 3 calcite precipitation. It is required to identify the origin of each groundwater in consideration of historical geology for further understanding of long-term hydrochemical condition. (author)

  7. Comparative Study of Skeletal Stability between Postoperative Skeletal Intermaxillary Fixation and No Skeletal Fixation after Bilateral Sagittal Split Ramus Osteotomy

    DEFF Research Database (Denmark)

    Hartlev, Jens; Godtfredsen, Erik; Andersen, Niels Trolle

    2014-01-01

    OBJECTIVES: The purpose of the present study was to evaluate skeletal stability after mandibular advancement with bilateral sagittal split osteotomy. MATERIAL AND METHODS: Twenty-six patients underwent single-jaw bilateral sagittal split osteotomy (BSSO) to correct skeletal Class II malocclusion....

  8. Thermal Stability Studies of Candidate Decontamination Agents for Hanford’s Plutonium Finishing Plant Plutonium-Contaminated Gloveboxes

    Energy Technology Data Exchange (ETDEWEB)

    Scheele, Randall D.; Cooper, Thurman D.; Jones, Susan A.; Ewalt, John R.; Compton, James A.; Trent, Donald S.; Edwards, Matthew K.; Kozelisky, Anne E.; Scott, Paul A.; Minette, Michael J.

    2005-09-29

    This report provides the results of PNNL's and Fluor's studies of the thermal stabilities of potential wastes arising from decontamination of Hanford's Plutonium Finishing Plant's plutonium contaminated gloveboxes. The candidate wastes arising from the decontamination technologies ceric nitrate/nitric acid, RadPro, Glygel, and Aspigel.

  9. A Longitudinal Study of Reading Comprehension Achievement from Grades 3 to 10: Investigating Models of Stability, Cumulative Growth, and Compensation

    Science.gov (United States)

    Kwiatkowska-White, Bozena; Kirby, John R.; Lee, Elizabeth A.

    2016-01-01

    This longitudinal study of 78 Canadian English-speaking students examined the applicability of the stability, cumulative, and compensatory models in reading comprehension development. Archival government-mandated assessments of reading comprehension at Grades 3, 6, and 10, and the Canadian Test of Basic Skills measure of reading comprehension…

  10. Outdoor Operational Stability of Indium-Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark

    DEFF Research Database (Denmark)

    Angmo, Dechan; Sommeling, Paul M.; Gupta, Ritu

    2014-01-01

    We present an outdoor interlaboratory stability study of fully printed and coated indium-tin-oxide (ITO)-free polymer solar cell modules in JNCASR Bangalore (India), ECN (Holland), and DTU (Denmark) carried over more than 1 year. The modules comprising a fully printed and coated stack (Ag grid...

  11. A comparative study of the Osstell™ versus the Osstell Mentor™ to evaluate implant stability in human cadaver mandibles

    NARCIS (Netherlands)

    Snijders, R.S.; van Wijk, A.J.; Lindeboom, J.A.

    2013-01-01

    The aim of this study was to assess the primary stability of dental implants by resonance frequency analysis (RFA) using the Osstell™ and Osstell Mentor™ devices and to investigate the reproducibility and comparability of the results obtained with these devices. Twenty-four Straumann implants

  12. A preliminary study of the metabolic stability of a series of benzoxazinone derivatives as potent neuropeptide Y5 antagonists.

    Science.gov (United States)

    Dordal, Alberto; Lipkin, Mike; Macritchie, Jackie; Mas, Josep; Port, Adriana; Rose, Sally; Salgado, Leonardo; Savic, Vladimir; Schmidt, Wolfgang; Serafini, Maria Teresa; Spearing, William; Torrens, Antoni; Yeste, Sandra

    2005-08-15

    The metabolic stability of benzoxazinone derivatives, a potent series of NPY Y5 antagonists, has been investigated. This study resulted in the identification of the structural moieties prone to metabolic transformations and which strongly influenced the in vitro half-life. This provides opportunities to optimize the structure of this new class of NPY Y5 antagonists.

  13. Stability Study of Iriba Brucellosis Full-dose and Reduced-dose Vaccine Produced by Razi Institute in Iran

    Directory of Open Access Journals (Sweden)

    Hasannia, E.

    2015-04-01

    Full Text Available Stability study of biological products plays an important role for determination of product changes in maintenance period and ensuring of safety and efficacy of vaccines. In this research, accelerated and long-term stability study performed for six batches of full and reduced-dose cattle Iriba strain brucellosis vaccine that manufactured by Razi vaccine and serum research institute as a new vaccine. After sampling, the vaccines were tested for accelerated stability, after four days storage at 22 0C and tested intervals in three months until 24 months for long-term stability after storage at 2-8 0C. The result indicated all batches of vaccines in accelerated stability met the specification recommended by OIE 2012 and the mean loss of activity for full-dose was 16.68, 18.87 and 17.79 % and for reduced-dose was 38.85, 36.06 and 34.98 %. In long term stability, the quality control tests including colony forming unit, purity, dissociation and physicochemical tests in all samples until 24 months, met the specification recommended by OIE 2012. The full-dose vaccines showed a mean loss of activity of 30.73, 25.53 and 32.45 % and the reduced-dose vaccines showed 63.51, 58.60 and 60.83 %. The mean increasing of moisture content was, 187.85, 214.13 and 160.77 % for full-dose and 142.35, 110.23 and 164.47 % for reduced-dose. So, the results of this research indicated in spite of moisture content increasing in second year, the brucellosis vaccines with this strain are stable at least 24months if the cold chain considered properly but the best expiry date for the vaccine is one year.

  14. Stability and change in the Big Five personality domains: evidence from a longitudinal study of Australians.

    Science.gov (United States)

    Wortman, Jessica; Lucas, Richard E; Donnellan, M Brent

    2012-12-01

    Longitudinal data from a nationally representative sample of Australians were used to evaluate mean-level differences and rank-order stability in personality traits assessed twice over a 4-year time span (n = 13,134). Extraversion, Neuroticism, and Openness declined over the life span, whereas Agreeableness increased among young cohorts, was stable among middle-aged cohorts, and declined among the oldest old. Cross-sectional analyses suggested an increase in Conscientiousness throughout the life span, though longitudinal analyses suggested a slight decline in late life. There was an inverted U-shaped pattern for rank-order stability, with peak stability occurring in middle age. For three of the Big Five domains (Extraversion, Agreeableness, and Conscientiousness), age-related differences appeared to be somewhat more pronounced before age 30 than after age 30. 2013 APA, all rights reserved

  15. Low Molecular Weight Chitosan–Insulin Polyelectrolyte Complex: Characterization and Stability Studies

    Directory of Open Access Journals (Sweden)

    Zakieh I. Al-Kurdi

    2015-03-01

    Full Text Available The aim of the work reported herein was to investigate the effect of various low molecular weight chitosans (LMWCs on the stability of insulin using USP HPLC methods. Insulin was found to be stable in a polyelectrolyte complex (PEC consisting of insulin and LMWC in the presence of a Tris-buffer at pH 6.5. In the presence of LMWC, the stability of insulin increased with decreasing molecular weight of LMWC; 13 kDa LMWC was the most efficient molecular weight for enhancing the physical and chemical stability of insulin. Solubilization of insulin-LMWC polyelectrolyte complex (I-LMWC PEC in a reverse micelle (RM system, administered to diabetic rats, results in an oral delivery system for insulin with acceptable bioactivity.

  16. Study on the Influence of Elevation of Tailing Dam on Stability

    Science.gov (United States)

    Wan, Shuai; Wang, Kun; Kong, Songtao; Zhao, Runan; Lan, Ying; Zhang, Run

    2017-12-01

    This paper takes Yunnan as the object of a tailing, by theoretical analysis and numerical calculation method of the effect of seismic load effect of elevation on the stability of the tailing, to analyse the stability of two point driven safety factor and liquefaction area. The Bishop method is adopted to simplify the calculation of dynamic safety factor and liquefaction area analysis using comparison method of shear stress to analyse liquefaction, so we obtained the influence of elevation on the stability of the tailing. Under the earthquake, with the elevation increased, the safety coefficient of dam body decreases, shallow tailing are susceptible to liquefy. Liquefaction area mainly concentrated in the bank below the water surface, to improve the scientific basis for the design and safety management of the tailing.

  17. Study of the oxidative stability of oils vegetables for production of Biodiesel

    Directory of Open Access Journals (Sweden)

    Marco Aurélio R Melo

    2014-04-01

    Full Text Available Biodiesel is technological and estrategical Brazilian oportunity once this country has abundant vegetable species which oils are extracted to produce this biofuel. Oleaginous viability depends on its technical, economical and social-environmental competitiviness. Fatty acid variety determines its thermal and oxidative stability, mainly polyunsaturated ones. In this point of view, this papers aims evaluate oxidative stability and resistence to thermal decomposition of pequi, buriti and macauba oils. These fatty acids profiles are in agreement with literature data. Comparing thermal and oxidative stability of these oils, it can be seen pequi oil is more easily to oxidate than buriti and macauba oils when PetroOXY and Rancimat methods are employed.

  18. The study of size and stability of n-butylcyanoacrylate nanocapsule suspensions encapsulating green grass fragrance

    Science.gov (United States)

    Zhu, G. Y.; Lin, C. T.; Chen, J. M.; Lei, D. M.; Zhu, G. X.

    2018-01-01

    Green grass fragrance has been widely used in many fields. However, fragrances are volatile compounds that do not last long. In order to prolong its odor, nanocapsules encapsulated green grass fragrance were prepared. The paper deals with the preparation of green grass fragrance nanocapsules by emulsion polymerization. N-butylcyanoacrylate (BCA) with excellent biocompatibility and biodegradability was used as encapsulant. The nanocapsule suspension systems were characterized and its stability was investigated. The physicochemical properties of polymeric nanocapsules (average diameter and polydispersity) were evaluated as a function of time to assess the system stability. The result showed that the system (containing 0.8% of green grass fragrance, with a polydispersity index (PDI) near 0.1 and an average diameter in the range of 20-30 nm) was an ideal state and relatively stable. Besides, the distinction of stability of three nanocapsule suspensions with different green grass fragrance content was also obvious from scanning electron microscopy (SEM).

  19. a Study on the Stability of Earth DAM Subjected to the Seismic Load

    Science.gov (United States)

    Qi, Jinghua; Che, Ailan; Ge, Xiurun

    For ensuring the earth dam's stability of Wangqingtuo reservoir when silt liquefaction happens during Tangshan earthquake, a large amount of laboratory soil tests and field measurements have been performed to obtain the mechanic properties of the soil and silt dynamic parameters. On the basis of the soil tests, the equivalent linear constitutive model is employed in the dynamic numerical simulation of the typical dam and the results indicate that the shear deformation is induced by the foundation liquefaction with the help of the geo-slope software. Moreover, the stability analysis is performed using the finite element elasto-plastic model that is considered the Mohr-Coulomb failure criteria to calculate the stability factor. The factors indicate the local instability would take place because of the shear action. At last, the measures are introduced to the designers for preventing the dam from the instability.

  20. Low Molecular Weight Chitosan–Insulin Polyelectrolyte Complex: Characterization and Stability Studies

    Science.gov (United States)

    Al-Kurdi, Zakieh I.; Chowdhry, Babur Z.; Leharne, Stephen A.; Al Omari, Mahmoud M. H.; Badwan, Adnan A.

    2015-01-01

    The aim of the work reported herein was to investigate the effect of various low molecular weight chitosans (LMWCs) on the stability of insulin using USP HPLC methods. Insulin was found to be stable in a polyelectrolyte complex (PEC) consisting of insulin and LMWC in the presence of a Tris-buffer at pH 6.5. In the presence of LMWC, the stability of insulin increased with decreasing molecular weight of LMWC; 13 kDa LMWC was the most efficient molecular weight for enhancing the physical and chemical stability of insulin. Solubilization of insulin-LMWC polyelectrolyte complex (I-LMWC PEC) in a reverse micelle (RM) system, administered to diabetic rats, results in an oral delivery system for insulin with acceptable bioactivity. PMID:25830681

  1. Removal of polymeric filter cake in petroleum wells. A study of commercial amylase stability

    Energy Technology Data Exchange (ETDEWEB)

    Kameda, Etel; Coelho, Maria Alice Z. [Escola de Quimica, Universidade Federal do Rio de Janeiro, Centro de Tecnologia, Bloco E, Lab. 113, Cidade Universitaria, 21949-900, Rio de Janeiro, RJ (Brazil); De Queiroz Neto, Joao C. [Cenpes/Petrobras, Cidade Universitaria, Rio de Janeiro, RJ (Brazil); Langone, Marta A.P. [Instituto de Quimica, Universidade do Estado do Rio de Janeiro, Rua Sao Francisco Xavier, 524, PHLC/IQ sala 310, Rio de Janeiro, RJ (Brazil)

    2007-11-15

    The drilling fluid contact with the productive zone of drilling wells, with horizontal or complex configurations, can reduce its productivity by fluid invasion in the borehole wall. Drilling fluids usually comprise natural polymers as starch and xanthan gum. These polymers are deposited as a filter cake on the wellbore wall. A common approach to remove this filter cake is the application of acids or strong oxidative solutions. However, these are non-specific species and a possible alternative lies in enzymatic preparations that are able to hydrolyze such polymers. The enzymes catalyze specific substrates, are environmentally friendly and the enzymatic degradation rate is slower than that achieved by the oxidative species, permitting to produce uniform degradation of the filter cake. Openhole operations require thermo and pressure stability of these enzymatic products. The results herein reported deals with the technical viability analysis of a commercial {alpha}-amylase as a new catalyst for filter cake removal. The effects of process parameters, like temperature (65, 80 and 95 C), enzyme concentration (1, 5.5 and 10% v/v), calcium concentration (5, 70 and 135 ppm), and pressure (100, 500, 100 and 6000 psi), on amylase stability under openhole operations were investigated. Temperature demonstrated to be the most important parameter for the enzyme stability. The enzyme thermostability behavior in high salt (NaCl) concentration (completion fluid) was not significantly different from the control solution in distillated water. The pressure effect on enzyme stability did not affect the enzyme stability as temperature. Hydrostatic pressure (6000 psi) did not impact the amylolytic activity in brine solution. Combined pressure-temperature assays showed that temperature is the key factor in enzyme stability for application in polymeric filter cake removal in petroleum wells. (author)

  2. Ab initio study of effects of substitutional additives on the phase stability of {gamma}-alumina

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Kaiyun; Music, Denis; Sarakinos, Kostas; Schneider, Jochen M, E-mail: jiang@mch.rwth-aachen.d [Materials Chemistry, RWTH Aachen University, Mies van der Rohe Strasse 10, D-52074 Aachen (Germany)

    2010-12-22

    Using ab initio calculations, we have evaluated two structural descriptions of {gamma}-Al{sub 2}O{sub 3}, spinel and tetragonal hausmannite, and explored the relative stability of {gamma}-Al{sub 2}O{sub 3} with respect to {alpha}-Al{sub 2}O{sub 3} with 2.5 at.% of Si, Cr, Ti, Sc, and Y additives to identify alloying element induced electronic structure changes that impede the {gamma} to {alpha} transition. The total energy calculations indicate that Si stabilizes {gamma}-Al{sub 2}O{sub 3}, while Cr stabilizes {alpha}-Al{sub 2}O{sub 3}. As Si is added, a bond length increase in {alpha}-Al{sub 2}O{sub 3} is observed, while strong and short Si-O bonds are formed in {gamma}-Al{sub 2}O{sub 3}, consequently stabilizing this phase. On the other hand, Cr additions induce a smaller bond length increase in {alpha}-Al{sub 2}O{sub 3} than in {gamma}-Al{sub 2}O{sub 3}, therefore stabilizing the {alpha}-phase. The bulk moduli of {gamma}-Al{sub 2}O{sub 3} with these additives show no significant changes. The phase stability and elastic property data discussed here underline the application potential of Si alloyed {gamma}-Al{sub 2}O{sub 3} for applications at elevated temperatures. Furthermore it is evident that the tetragonal hausmannite structure is a suitable description for {gamma}-Al{sub 2}O{sub 3}.

  3. Calculation and Simulation Study on Transient Stability of Power System Based on Matlab/Simulink

    Directory of Open Access Journals (Sweden)

    Shi Xiu Feng

    2016-01-01

    Full Text Available The stability of the power system is destroyed, will cause a large number of users power outage, even cause the collapse of the whole system, extremely serious consequences. Based on the analysis in single machine infinite system as an example, when at the f point two phase ground fault occurs, the fault lines on either side of the circuit breaker tripping resection at the same time,respectively by two kinds of calculation and simulation methods of system transient stability analysis, the conclusion are consistent. and the simulation analysis is superior to calculation analysis.

  4. Low molecular weight chitosan–insulin polyelectrolyte complex: characterization and stability studies

    OpenAIRE

    Al-Kurdi, Zakieh; Chowdhry, Babur Z.; Leharne, Stephen A.; Omari, Mahmoud; Badwan, Adnan

    2015-01-01

    The aim of the work reported herein was to investigate the effect of various low molecular weight chitosans (LMWCs) on the stability of insulin using USP HPLC methods. Insulin was found to be stable in a polyelectrolyte complex (PEC) consisting of insulin and LMWC in the presence of a Tris-buffer at pH 6.5. In the presence of LMWC, the stability of insulin increased with decreasing molecular weight of LMWC; 13 kDa LMWC was the most efficient molecular weight for enhancing the physical and che...

  5. Acid-base equilibrium. A thermodynamic study of formation and stability of the Bi-2223 phase

    International Nuclear Information System (INIS)

    Xi, Z.; Zhou, L.

    1993-01-01

    A general acid-base equilibrium theory was proposed to explain the formation and stability of the Bi-2223 phase based on the Lewis acid base theory and principle of metallurgical physical chemistry. The acid-base nature of oxide was defined according to the electrostatic force between cation and oxygen anion. A series of experimental facts were systematically explained based on the theory: substitution of Bi for Ca in the Pb-free 2223 phase, and the effect of substitution of the high-valent cation for Bi 3+ ; oxygen-pressure atmosphere, and the heat-schocking technique on the formation and stability of the 2223 phase. 14 refs., 2 tabs

  6. Sulfur Polymer Stabilization/Solidification Treatability Study of Mercury Contaminated Soil from the Y-12 Site

    Energy Technology Data Exchange (ETDEWEB)

    Kalb P.; Milian, L.; Yim, S. P.

    2012-11-30

    As a result of past operations, the Department of Energy’s (DOE) Oak Ridge Y-12 National Security Complex (Y-12 Plant) has extensive mercury-contamination in building structures, soils, storm sewer sediments, and stream sediments, which are a source of pollution to the local ecosystem. Because of mercury’s toxicity and potential impacts on human health and the environment, DOE continues to investigate and implement projects to support the remediation of the Y-12 site.URS and #9122;CH2M Oak Ridge LLC (UCOR) under its prime contract with DOE has cleanup responsibilities on the DOE Oak Ridge Reservation and is investigating potential mercury-contaminated soil treatment technologies through an agreement with Babcock and Wilcox (B and W) Y-12, the Y-12 operating contractor to DOE. As part of its investigations, UCOR has subcontracted with Brookhaven National Laboratory (BNL) to conduct laboratory-scale studies evaluating the applicability of the Sulfur Polymer Stabilization/Solidification (SPSS) process using surrogate and actual mixed waste Y-12 soils containing mercury (Hg) at 135, 2,000, and 10,000 ppm.SPSS uses a thermoplastic sulfur binder to convert Hg to stable mercury sulfide (HgS) and solidifies the chemically stable product in a monolithic solid final waste form to reduce dispersion and permeability. Formulations containing 40 – 60 dry wt% Y-12 soil were fabricated and samples were prepared in triplicate for Environmental Protection Agency Toxicity Characteristic Leaching Procedure (TCLP) testing by an independent laboratory. Those containing 50 and 60 wt% soil easily met the study criteria for maximum allowable Hg concentrations (47 and 1 ppb, respectively compared with the TCLP limit of 200 ppb Hg). The lowest waste loading of 40 wt% yielded TCLP Hg concentrations slightly higher (240 ppb) than the allowable limit. Since the Y-12 soil tended to form clumps, the improved leaching at higher waste loadings was probably due to reduction in particle size

  7. Study of persistent fog in Bulgaria with Sofia Stability Index, GNSS tropospheric products and WRF simulations

    Science.gov (United States)

    Stoycheva, Anastasiya; Manafov, Ilian; Vassileva, Keranka; Guerova, Guergana

    2017-08-01

    The topography of the high valley, in which the Bulgarian capital Sofia is located, predispose the seasonal character of fog formation in anticyclonic conditions. The fog in Sofia is mainly in the cold season, with the highest frequency of registrations in December and January. During the anticyclonic conditions the clear sky and calm or nearly calm conditions favour the formation of inversions and hence the fog formation. The maximum of fog registrations is at 6 UTC and minimum at 15 UTC but during prolonged fog a low visibility is registered also between 12 and 15 UTC. A prolonged fog is registered in Sofia between 3 and 10 January 2014 and is studied by using surface synoptic observations and vertically Integrated Water Vapour (IWV) derived from Global Navigation Satellite Systems (GNSS). The fog is separated in two parts: 1) part I - radiation fog (3-5 January) and 2) part II - advection fog (7-10 January). The Sofia Stability Index (SSI) is computed using surface temperature observation at 600 and 2300 m asl. The SSI is found to give additional information about the development and the dissipation of inversion layer especially for the part II fog. IWV is derived from two GNSS stations at 600 and 1120 m asl. and clearly detects the change in the air mass between the part I and II (5-6 January) fog. Furthermore, dependence between diurnal IWV cycle and fog formation/dissipation is found with IWV variation being lowest during the days with fog. A comparison of SSI and index computed using the WRF Numerical Weather Prediction model temperatures (SSI-W) shows good correlation but an negative off-set. Assimilation of surface and upper-air observations in the WRF model resulted in partial improvement of the index (10%), which is a result of moderate improvement of the vertical temperature profile.

  8. Substituent Effects on the Stability of Thallium and Phosphorus Triple Bonds: A Density Functional Study.

    Science.gov (United States)

    Lu, Jia-Syun; Yang, Ming-Chung; Su, Ming-Der

    2017-07-05

    Three computational methods (M06-2X/Def2-TZVP, B3PW91/Def2-TZVP and B3LYP/LANL2DZ+dp) were used to study the effect of substitution on the potential energy surfaces of RTl≡PR (R = F, OH, H, CH₃, SiH₃, SiMe(Si t Bu₃)₂, Si i PrDis₂, Tbt (=C₆H₂-2,4,6-(CH(SiMe₃)₂)₃), and Ar* (=C₆H₃-2,6-(C₆H₂-2, 4,6- i -Pr₃)₂)). The theoretical results show that these triply bonded RTl≡PR compounds have a preference for a bent geometry (i.e., ∠R⎼Tl⎼P ≈ 180° and ∠Tl⎼P⎼R ≈ 120°). Two valence bond models are used to interpret the bonding character of the Tl≡P triple bond. One is model [I], which is best described as TlP. This interprets the bonding conditions for RTl≡PR molecules that feature small ligands. The other is model [II], which is best represented as TlP. This explains the bonding character of RTl≡PR molecules that feature large substituents. Irrespective of the types of substituents used for the RTl≡PR species, the theoretical investigations (based on the natural bond orbital, the natural resonance theory, and the charge decomposition analysis) demonstrate that their Tl≡P triple bonds are very weak. However, the theoretical results predict that only bulkier substituents greatly stabilize the triply bonded RTl≡PR species, from the kinetic viewpoint.

  9. Development of tantalum oxynitride thin films produced by PVD: Study of structural stability

    Energy Technology Data Exchange (ETDEWEB)

    Cristea, D. [Centro de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Department of Materials Science, Transylvania University, 500036 Brasov (Romania); Crisan, A. [Department of Materials Science, Transylvania University, 500036 Brasov (Romania); Barradas, N.P.; Alves, E. [Instituto Superior Técnico, Universidade Técnica de Lisboa Estrada Nacional 10, ao km 139,7 2695-066, Bobadela LRS (Portugal); Moura, C.; Vaz, F. [Centro de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Cunha, L., E-mail: lcunha@fisica.uminho.pt [Centro de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal)

    2013-11-15

    The purpose of this work is to study the evolution of the structure and of the thermal stability of a group of tantalum oxynitride thin films, prepared by magnetron sputtering, under the influence of vacuum annealing, up to a temperature of 800 °C. When varying the partial pressure of the reactive gases (P{sub O{sub 2+N{sub 2}}}), during the deposition process, the films change from a structure with a combination of poorly developed crystallites of the tetragonal β-Ta and of the face centred cubic (fcc) Ta(O,N) phases, for the films deposited with low P{sub O2+N2}, to a quasi-amorphous structure, for the films deposited with highest pressures. For intermediate pressures, the films reveal the presence of the fcc-Ta(O,N) structure. This structure corresponds to O atoms substituting some of the N atoms on the fcc-TaN structure and/or N atoms substituting O atoms of the fcc-γ-TaO structure. When subjected to the thermal annealing at 700 °C or higher, the film produced with lowest partial pressure revealed a remarkable structural change. New diffraction peaks appear and can only be attributed to a sub-stoichiometric hexagonal tantalum nitride structure. The film did not reveal any signs of delamination or cracks after all annealing temperatures. The two films produced with highest partial pressure proved to be the most stable. Structurally, they maintain the amorphous structure after all the annealing treatments and, in addition, no cracks or delamination were detected.

  10. Mechanical stability of immediately loaded implants with various surfaces and designs: a pilot study in dogs.

    Science.gov (United States)

    Neugebauer, Jörg; Weinländer, Michael; Lekovic, Vojislav; von Berg, Karl-Heinz Linne; Zoeller, Joachim E

    2009-01-01

    Immediate loading is among the most innovative techniques in implant therapy today. This pilot study investigates the biomechanical outcome of various designs and surfaces that claim to shorten implant treatment. In each quadrant of two mongrel dogs, four different implants were used for immediate loading. The following implants were placed 3 months after tooth extraction: screw with low thread profile and anodic oxidized surface (LPAOS), solid screw with wide thread profile and titanium plasma spray coating (WPTPS), screw with low profile and hybrid design of double-etched and machined surface (LPHES), and screw with two thread profiles and a sandblasted and acid-etched surface (DTSAE). The insertion torque of each implant was above 35 Ncm. Resonance frequency analysis was performed after implant placement and again after sacrifice. Additionally, the removal torque and the amount of embedded titanium particles in the peri-implant bone were measured. All 16 prostheses were functional after a 5-month loading period. The highest mean removal torque values were recorded with WPTPS implants (24.4 Ncm/mm), followed by DTSAE implants (22.3 Ncm/mm) and LPAOS implants (18.7 Ncm/mm); the lowest score was obtained by LPHES (12.0 Ncm/mm). The ISQ values increased between the time of surgery and recall for all systems on average, but a significant positive correlation was found for DTSAE only. Significantly higher amounts of titanium were found in the surrounding bone with WPTPS (0.76%) and LPAOS (0.41%) in comparison with DTSAE (0.10%) and LPHES (0.03%). Immediate loading is possible with various designs and surfaces if high primary stability can be achieved during implant placement.

  11. An analytic study of the magnetohydrodynamic stability of inverse shear profiles

    International Nuclear Information System (INIS)

    Gimblett, C.G.; Hastie, R.J.; Hender, T.C.

    1996-01-01

    This paper reports on the ideal magnetohydrodynamic (MHD) stability of tokamak field profiles that have a non-monotonic safety factor q(r). An analytic criterion is obtained for these open-quote open-quote inverse shear close-quote close-quote profiles by expanding in inverse aspect ratio and assuming that the minimum in q is slightly less than the m/n value of the mode under examination (m and n being the principal poloidal and toroidal mode numbers of the instability). Three terms are identified as controlling the stability of this open-quote open-quote double kink close-quote close-quote; two of them are stabilizing and due, respectively, to field line bending and the interaction of average favorable curvature with the pressure gradient. The possibility of instability comes from the third term which is due to toroidal coupling and is ballooning in character. The analytic results are compared with those from a fully toroidal stability code

  12. Numerical Study of Global Stability of Oblate Field-Reversed Configurations

    International Nuclear Information System (INIS)

    Belova, E.V.; Jardin, S.C.; Ji, H.; Yamada, M.; Kulsrud, R.

    2000-01-01

    Global stability of the oblate (small elongation, E 1 these are the interchange and two co-interchange modes with different polarization. It is shown that the n = 1 tilt mode becomes an external mode when E 1 co-interchange modes still remains an open question

  13. Combined Statistical Analyses for Long-Term Stability Data with Multiple Storage Conditions : A Simulation Study

    NARCIS (Netherlands)

    Almalik, Osama; Nijhuis, Michiel B.; van den Heuvel, Edwin R.

    2014-01-01

    Shelf-life estimation usually requires that at least three registration batches are tested for stability at multiple storage conditions. The shelf-life estimates are often obtained by linear regression analysis per storage condition, an approach implicitly suggested by ICH guideline Q1E. A linear

  14. Heterogeneity of accelerated photooxidation in commodity polymers stabilized by HAS: ESRI, IR, and MH study

    Czech Academy of Sciences Publication Activity Database

    Pilař, Jan; Michálková, Danuše; Šlouf, Miroslav; Vacková, Taťana; Dybal, Jiří

    2014-01-01

    Roč. 103, May (2014), s. 11-25 ISSN 0141-3910 R&D Projects: GA ČR GA202/09/2078 Institutional support: RVO:61389013 Keywords : hindered amine stabilizers * heterogeneity of photooxidation * electron spin resonance imaging Subject RIV: BO - Biophysics Impact factor: 3.163, year: 2014

  15. The structure and stability of common mental disorders - The NEMESIS Study

    NARCIS (Netherlands)

    Vollebergh, W.A.M.; Iedema, J; Bijl, R.V.; de Graaf, R.; Smit, F.; Ormel, J.

    Background: We analyzed the underlying latent structure of 12-month DSM-III-R diagnoses of 9 common disorders for the general population in the Netherlands. In addition, we sought to establish (1) the stability of the latent structure underlying mental disorders across a 1-year period (structural

  16. Numerical Study of Stability of Cold Formed Built-Up Columns

    Directory of Open Access Journals (Sweden)

    Raul Zaharia

    2005-01-01

    Full Text Available By means of numerical simulations using ANSYS program, the stability behavior of built-up columns made of back-to-back cold formed C sections, bolted together by C stitches, is analyzed. Comparison of the numerical analysis with the results obtained using two different design methods and experimental results are provided.

  17. Transport and stability studies in negative central shear advanced tokamak plasmas

    International Nuclear Information System (INIS)

    Jayakumar, R.J.

    2003-01-01

    Achieving high performance for long duration is a key goal of Advanced Tokamak (AT) research around the world. To this end, tokamak experiments are focusing on obtaining (a) a high fraction of well-aligned non-inductive plasma current (b) wide internal transport barriers (ITBs) in the ion and electron transport channels to obtain high temperatures (c) control of resistive wall modes and neoclassical Tearing Modes which limit the achievable beta. A current profile that yields a negative central magnetic shear (NCS) in the core is consistent with the above focus; Negative central shear is conducive for obtaining internal transport barriers, for high degree of bootstrap current alignment and for reaching the second stability region for ideal ballooning modes, while being stable to ideal kink modes at high beta with wall stabilization. Much progress has been made in obtaining AT performance in several tokamaks through an increasing understanding of the stability and transport properties of tokamak plasmas. RF and neutral beam current drive scenarios are routinely developed and implemented in experiments to access new advanced regimes and control plasma profiles. Short duration and sustained Internal Transport Barriers (ITB) have been obtained in the ion and electron channels. The formation of an ITB is attributable to the stabilization of ion and electron temperature gradient (ITG and ETG) and trapped electron modes (TEM), enhancement of E x B flow shear rate and rarefaction of resonant surfaces near the rational q min values. (orig.)

  18. Trophic level stability-inducing effects of predaceous early juvenile fish in an estuarine mesocosm study.

    Science.gov (United States)

    Wasserman, Ryan J; Noyon, Margaux; Avery, Trevor S; Froneman, P William

    2013-01-01

    Classically, estuarine planktonic research has focussed largely on the physico-chemical drivers of community assemblages leaving a paucity of information on important biological interactions. Within the context of trophic cascades, various treatments using in situ mesocosms were established in a closed estuary to highlight the importance of predation in stabilizing estuarine plankton abundances. Through either the removal (filtration) or addition of certain planktonic groups, five different trophic systems were established. These treatments contained varied numbers of trophic levels and thus different "predators" at the top of the food chain. The abundances of zooplankton (copepod and polychaete), ciliate, micro-flagellate, nano-flagellate and bacteria were investigated in each treatment, over time. The reference treatment containing apex zooplanktivores (early juvenile mullet) and plankton at natural densities mimicked a natural, stable state of an estuary. Proportional variability (PV) and coefficient of variation (CV) of temporal abundances were calculated for each taxon and showed that apex predators in this experimental ecosystem, when compared to the other systems, induced stability. The presence of these predators therefore had consequences for multiple trophic levels, consistent with trophic cascade theory. PV and CV proved useful indices for comparing stability. Apex predators exerted a stabilizing pressure through feeding on copepods and polychaetes which cascaded through the ciliates, micro-flagellates, nano-flagellates and bacteria. When compared with treatments without apex predators, the role of predation in structuring planktonic communities in closed estuaries was highlighted.

  19. Comparative study of formation and stabilization of Gold and Silver Clusters and Nanoparticles in Mordenites

    NARCIS (Netherlands)

    Bogdanchikova, N.; Tuzovskaya, I.; Pestryakov, A.; Susarrey Arce, A.

    2011-01-01

    Supporting silver and gold on mordenites by ion-exchange method with further reduction with H2 leads to formation of neutral and charged metal clusters inside zeolite channels as well as metal nanoparticles on external surface of mordenite. A portion of the cluster states of the metals and stability

  20. Comparative study on the microbiology and shelf life stability of palm ...

    African Journals Online (AJOL)

    The microbiological and biochemical changes and shelf life stability of Elaeis guineensis and Raphia hookeri brands of palm wine were determined. R. hookeri brands were found to habour more heterotrophic and coliform population than the E. guineensis, whereas the later haboured more yeast species. Identification tests ...

  1. Segmental stabilization and muscular strengthening in chronic low back pain: a comparative study

    Directory of Open Access Journals (Sweden)

    Fábio Renovato França

    2010-01-01

    Full Text Available OBJECTIVE: To contrast the efficacy of two exercise programs, segmental stabilization and strengthening of abdominal and trunk muscles, on pain, functional disability, and activation of the transversus abdominis muscle (TrA, in individuals with chronic low back pain. DESIGN: Our sample consisted of 30 individuals, randomly assigned to one of two treatment groups: segmental stabilization, where exercises focused on the TrA and lumbar multifidus muscles, and superficial strengthening, where exercises focused on the rectus abdominis, abdominus obliquus internus, abdominus obliquus externus, and erector spinae. Groups were examined to discovere whether the exercises created contrasts regarding pain (visual analogical scale and McGill pain questionnaire, functional disability (Oswestry disability questionnaire, and TrA muscle activation capacity (Pressure Biofeedback Unit = PBU. The program lasted 6 weeks, and 30-minute sessions occurred twice a week. Analysis of variance was used for inter- and intra-group comparisons. The significance level was established at 5%. RESULTS: As compared to baseline, both treatments were effective in relieving pain and improving disability (p<0.001. Those in the segmental stabilization group had significant gains for all variables when compared to the ST group (p<0.001, including TrA activation, where relative gains were 48.3% and -5.1%, respectively. CONCLUSION: Both techniques lessened pain and reduced disability. Segmental stabilization is superior to superficial strengthening for all variables. Superficial strengthening does not improve TrA activation capacity.

  2. Analytical and radiochemical methods in the stability study of the MIBI-Sm

    International Nuclear Information System (INIS)

    Isaac, M.; Leyva, R.; Gamboa, R.; Turino, D.

    1997-01-01

    99mT c-MIBI is a radiopharmaceutical imaging agent useful for assessing myocardial perfusion. This paper presents the stability results obtained in the radiochemical purity and others parameters in the quality control of 5 batch during more than 2 years

  3. Numerical Study of Equilibrium, Stability, and Advanced Resistive Wall Mode Feedback Algorithms on KSTAR

    Science.gov (United States)

    Katsuro-Hopkins, Oksana; Sabbagh, S. A.; Bialek, J. M.; Park, H. K.; Kim, J. Y.; You, K.-I.; Glasser, A. H.; Lao, L. L.

    2007-11-01

    Stability to ideal MHD kink/ballooning modes and the resistive wall mode (RWM) is investigated for the KSTAR tokamak. Free-boundary equilibria that comply with magnetic field coil current constraints are computed for monotonic and reversed shear safety factor profiles and H-mode tokamak pressure profiles. Advanced tokamak operation at moderate to low plasma internal inductance shows that a factor of two improvement in the plasma beta limit over the no-wall beta limit is possible for toroidal mode number of unity. The KSTAR conducting structure, passive stabilizers, and in-vessel control coils are modeled by the VALEN-3D code and the active RWM stabilization performance of the device is evaluated using both standard and advanced feedback algorithms. Steady-state power and voltage requirements for the system are estimated based on the expected noise on the RWM sensor signals. Using NSTX experimental RWM sensors noise data as input, a reduced VALEN state-space LQG controller is designed to realistically assess KSTAR stabilization system performance.

  4. Ab initio study of pressure stabilized NiTi allotropes: Pressure-induced transformations

    Czech Academy of Sciences Publication Activity Database

    Holec, D.; Friák, M.; Dlouhý, Antonín; Neugebauer, J.

    2011-01-01

    Roč. 84, č. 22 (2011), 224119/1-224119/8 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z20410507 Keywords : shape - memory alloys * martensitic transformations * local stability Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.691, year: 2011

  5. Palladium(II)-Stabilized Pyridine-2-Diazotates: Synthesis, Structural Characterization, and Cytotoxicity Studies.

    Science.gov (United States)

    Tskhovrebov, Alexander G; Vasileva, Anna A; Goddard, Richard; Riedel, Tina; Dyson, Paul J; Mikhaylov, Vladimir N; Serebryanskaya, Tatiyana V; Sorokoumov, Viktor N; Haukka, Matti

    2018-02-05

    Well-defined diazotates are scarce. Here we report the synthesis of unprecedented homoleptic palladium(II) diazotate complexes. The palladium(II)-mediated nitrosylation of 2-aminopyridines with NaNO 2 results in the formation of metal-stabilized diazotates, which were found to be cytotoxic to human ovarian cancer cells.

  6. Trophic level stability-inducing effects of predaceous early juvenile fish in an estuarine mesocosm study.

    Directory of Open Access Journals (Sweden)

    Ryan J Wasserman

    Full Text Available Classically, estuarine planktonic research has focussed largely on the physico-chemical drivers of community assemblages leaving a paucity of information on important biological interactions.Within the context of trophic cascades, various treatments using in situ mesocosms were established in a closed estuary to highlight the importance of predation in stabilizing estuarine plankton abundances. Through either the removal (filtration or addition of certain planktonic groups, five different trophic systems were established. These treatments contained varied numbers of trophic levels and thus different "predators" at the top of the food chain. The abundances of zooplankton (copepod and polychaete, ciliate, micro-flagellate, nano-flagellate and bacteria were investigated in each treatment, over time. The reference treatment containing apex zooplanktivores (early juvenile mullet and plankton at natural densities mimicked a natural, stable state of an estuary. Proportional variability (PV and coefficient of variation (CV of temporal abundances were calculated for each taxon and showed that apex predators in this experimental ecosystem, when compared to the other systems, induced stability. The presence of these predators therefore had consequences for multiple trophic levels, consistent with trophic cascade theory.PV and CV proved useful indices for comparing stability. Apex predators exerted a stabilizing pressure through feeding on copepods and polychaetes which cascaded through the ciliates, micro-flagellates, nano-flagellates and bacteria. When compared with treatments without apex predators, the role of predation in structuring planktonic communities in closed estuaries was highlighted.

  7. Does the European financial stability bail out sovereigns or banks : An event study

    NARCIS (Netherlands)

    Horváth, Bálint; Huizinga, Harry

    2015-01-01

    On May 9, 2010 euro zone countries announced the creation of the European Financial Stability Facility. This paper investigates the impact of this announcement on bank share prices, bank credit default swap (CDS) spreads, and sovereign CDS spreads. The main private beneficiaries were bank creditors.

  8. Study of thermal stability of ultrafine-grained copper by means of electron back scattering diffraction

    Czech Academy of Sciences Publication Activity Database

    Man, O.; Pantělejev, L.; Kunz, Ludvík

    2010-01-01

    Roč. 51, č. 2 (2010), s. 209-213 ISSN 1345-9678 R&D Projects: GA AV ČR 1QS200410502 Institutional research plan: CEZ:AV0Z20410507 Keywords : ultra-fine grained copper * thermal stability of microstructure * electron back scattering diffraction * grain size * texture Subject RIV: JG - Metallurgy Impact factor: 0.779, year: 2010

  9. On personality stability and change: main results of Brno longitudinal study on life-span development

    Czech Academy of Sciences Publication Activity Database

    Blatný, Marek

    2007-01-01

    Roč. 51, Supplement (2007), s. 37-49 ISSN 0009-062X R&D Projects: GA ČR(CZ) GA406/06/1408 Institutional research plan: CEZ:AV0Z70250504 Keywords : life-span development * personality stability and change Subject RIV: AN - Psychology Impact factor: 0.133, year: 2007

  10. Implications of the stability behavior of zinc oxide nanoparticles for toxicological studies

    Science.gov (United States)

    Meißner, Tobias; Oelschlägel, Kathrin; Potthoff, Annegret

    2014-08-01

    The increasing use of zinc oxide (ZnO) nanoparticles in sunscreens and other cosmetic products demands a risk assessment that has to be done in toxicological studies. Such investigations require profound knowledge of the behavior of ZnO in cell culture media. The current study was performed to get well-dispersed suspensions of a hydrophilic (ZnO-hydro) and a lipophilic coated (ZnO-lipo) ZnO nanomaterial for use in in vitro tests. Therefore, systematic tests were carried out with common dispersants (phosphate, lecithin, proteins) to elucidate chemical and physical changes of ZnO nanoparticles in water and physiological solutions (PBS, DMEM). Non-physiological stock suspensions were prepared using ultrasonication. Time-dependent changes of pH, conductivity, zeta potential, particle size and dissolution were recorded. Secondly, the stock suspensions were added to physiological media with or without albumin (BSA) or serum (FBS), to examine characteristics such as agglomeration and dissolution. Stable stock suspensions were obtained using phosphate as natural and physiological electrostatic stabilizing agent. Lecithin proved to be an effective wetting agent for ZnO-lipo. Although the particle size remained constant, the suspension changed over time. The pH increased as a result of ZnO dissolution and formation of zinc phosphate complexes. The behavior of ZnO in physiological media was found to depend strongly on the additives used. Applying only phosphate as additive, ZnO-hydro agglomerated within minutes. In the presence of lecithin or BSA/serum, agglomeration was inhibited. ZnO dissolution was higher under physiological conditions than in the stock suspension. Serum especially promoted this process. Using body-related dispersants (phosphate, lecithin) non-agglomerating stock suspensions of hydrophilic and lipophilic ZnO were prepared as a prerequisite to perform meaningful toxicological investigation. Both nanomaterials showed a non-negligible dissolution behavior

  11. An experimental study of the stability of natural gas and propane turbulent non-premixed flame under diluting condition

    Directory of Open Access Journals (Sweden)

    Kashir Babak

    2012-01-01

    Full Text Available The stability behavior of a jet diffusion flame developing in a co-flowing stream is studied experimentally, using natural gas and propane as fuel gases. Effects of oxidant and fuel stream velocities and oxidant stream dilution have been studied. The results of experiments showed that with increasing fuel jet Reynolds number, there appears along the flame a point that is accompanied by reaction zone sudden expansion. Flame becomes turbulent downstream from this point. This point is called transition point. More increment of fuel jet Reynolds number moves the transition point to the upstream. Furthermore, two types of stability limits are observed. Blow-off of the rim-stabilized flame is the first stability limit. The second one is the break-off or extinction of the turbulent portion of the flame at the transition point from laminar to turbulent flow. The oxidant and fuel streams are in environmental temperature. In dilution experiments, the oxidant primary stream is oxygen that is diluted with nitrogen or carbon dioxide. In the other experiments oxidant is environmental air.

  12. Investigation on the Molecular Interactions Stabilizing the Structure of α-synuclein Fibril: An In silico Study.

    Science.gov (United States)

    Sanjeev, Airy; Mattaparthi, Venkata S K

    2017-01-01

    Amyloid fibrils represent stable form of many misfolded proteins associated with numerous diseases like Parkinson's Disease (PD), Type II diabetes and Alzheimer's disease (AD). α-synuclein protein is the principal constituent of Lewy bodies that are considered to be pathological hallmark of PD. Recently, a high resolution structure of α-synuclein protein that stacks together forming fibrils in brains of PD patients were identified. What structural features drive pathology of PD can now be possibly answered from the fibril structure of protein. To understand the molecular interactions those are responsible for the stability of the α- synuclein fibril structure. To study the molecular interactions stabilizing the α-synuclein fibril, we have used a high resolution amyloid fibril structure (PDB ID 2N0A). The molecular interactions in fibril structure were studied using PDBSum server. We then looked into the destabilization of α-synuclein fibril by disrupting the salt-bridge holding the strands and probable methods to decompose fibril into structurally distinct units using Top-domain web-server. The effect of salt-bridges on the stability of the fibril structure was studied by mutating one of the residues involved in the formation of salt-bridge using molecular dynamics simulation. Our results indicate a finite salt-bridge (E46-K80) is crucial for stability of protofibril. Besides, we observed hydrogen bonds and non-bonded contacts involved in fibril stabilization. We noticed α-synuclein dimer predominantly exists in conformations distinct from fibril. We characterized the salient molecular interactions in α-synuclein fibril and these findings may be useful to design potential inhibitors for the treatment of PD. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  13. Optical studies of the solution phase reduction and stabilization of indigo tetrasulfonate in polyelectrolyte complexes.

    Science.gov (United States)

    Hoene, Becca; Rivera, Dion

    2017-09-01

    Ultraviolet-visible (UV-vis) and fluorescence spectroscopy have been used to characterize the polyelectrolyte complexes (PECs) formed when potassium indigo tetrasulfonate (ITS) interacts with poly diallydimethylammonium chloride (PDADMAC) through columbic attraction in the presence of the reducing agent sodium bisulfite, NaHSO 3 . The PDADMAC facilitates both the reduction of the ITS and the stabilization of the reduced state of the ITS in an atmospheric oxygen environment. Dilutions of the dye solution show that the PEC is stable to dilutions of at least 1 to 1000. UV-vis studies indicate that the reduced ITS (ITS red ) forms what is likely a J-aggregate in the presence of PDADMAC with an absorbance band red shifted from the normal absorbance band of reduced ITS by roughly 130 nm, 390 nm to 520 nm. Excitation of the PEC solution at either 390 nm or 520 nm produces an emission spectrum of the aggregated complex with an emission maximum near 534 nm. Monomer emission at 480 nm of ITS red represents only 3.0 ± 0.5% of the emission signal of the aggregated complex. Kinetic studies using fluorescence spectroscopy over a temperature range of 30 to 70 °C and dilutions of dye solutions ranging from 1:10 to 1:1000 yield data for the oxidation of ITS red that is best fit by a first order rate constant. Kinetic data displays two distinctive regimes, a short time rate and a long time rate. These two distinct kinetic regimes are likely due to the reduced ITS interacting with an outer PEC environment and an inner PEC environment. First order rate constants could be used to estimate Δ ‡ H and Δ ‡ S of the oxidation reaction. Fluorescence data was used to calculate the partitioning of reduced ITS molecules between the outer and inner PEC environments. Partitioning from the inner to outer PEC environment was found to be entropically driven. Addition of NaCl to the diluted dye solutions could alter the kinetics of the oxidation but the significance of the effect depended on

  14. Occlusal stability after Herbst treatment of patients with retrognathic and prognathic facial types : A pilot study.

    Science.gov (United States)

    Bock, Niko C; Gnandt, Erhard; Ruf, Sabine

    2016-05-01

    The purpose of this study was to assess and compare occlusal changes induced by Herbst treatment and the stability of these changes in patients with retrognathic and prognathic facial types. The sample comprised 11 retrognathic (SNA ≤76°, SNB ≤72°, ML/NSL ≥36°) and 10 prognathic (SNA ≥83°, SNB ≥80°, ML/NSL ≤32°) patients with Class II molar relationships of ≥0.5 cusp widths bilaterally or ≥1.0 cusp width unilaterally. Both groups involved similar distributions of skeletal maturity before treatment. Study parameters were assessed on casts reflecting the situations before treatment (T0), after Herbst treatment (T1), after multibracket treatment immediately following Herbst treatment (T2), and after a mean of 31.1 months of retention (T3). Sagittal molar relationships improved by 0.8 cusp widths in the retrognathic and by 0.7 cusp widths in the prognathic group during active treatment (T0-T2). Insignificant changes of ≤0,2 cusp widths were seen in both groups during retention (T2-T3). Overjet decreased by 8.6 mm in the retrognathic and by 5.5 mm in the prognathic group during T0-T2, and both groups showed clinically irrelevant amounts of relapse by 0.7 mm during T2-T3. Overbite improved by 1.2 mm in the retrognathic and by 2.5 mm in the prognathic group during T0-T2, reaching mean values of 1.0 mm or 1.4 mm by T2, which was followed by 0.2 mm or 1.1 mm of relapse during T2-T3. Treatment with a Herbst appliance seems to offer stable correction of the sagittal occlusal relationships in Class II patients with retrognathic or prognathic facial types, with the vertical changes being more pronounced in the prognathic cases.

  15. Optical studies of the solution phase reduction and stabilization of indigo tetrasulfonate in polyelectrolyte complexes

    Directory of Open Access Journals (Sweden)

    Becca Hoene

    2017-09-01

    Full Text Available Ultraviolet-visible (UV-vis and fluorescence spectroscopy have been used to characterize the polyelectrolyte complexes (PECs formed when potassium indigo tetrasulfonate (ITS interacts with poly diallydimethylammonium chloride (PDADMAC through columbic attraction in the presence of the reducing agent sodium bisulfite, NaHSO3. The PDADMAC facilitates both the reduction of the ITS and the stabilization of the reduced state of the ITS in an atmospheric oxygen environment. Dilutions of the dye solution show that the PEC is stable to dilutions of at least 1 to 1000. UV–vis studies indicate that the reduced ITS (ITSred forms what is likely a J-aggregate in the presence of PDADMAC with an absorbance band red shifted from the normal absorbance band of reduced ITS by roughly 130 nm, 390 nm to 520 nm. Excitation of the PEC solution at either 390 nm or 520 nm produces an emission spectrum of the aggregated complex with an emission maximum near 534 nm. Monomer emission at 480 nm of ITSred represents only 3.0 ± 0.5% of the emission signal of the aggregated complex. Kinetic studies using fluorescence spectroscopy over a temperature range of 30 to 70 °C and dilutions of dye solutions ranging from 1:10 to 1:1000 yield data for the oxidation of ITSred that is best fit by a first order rate constant. Kinetic data displays two distinctive regimes, a short time rate and a long time rate. These two distinct kinetic regimes are likely due to the reduced ITS interacting with an outer PEC environment and an inner PEC environment. First order rate constants could be used to estimate Δ‡H and Δ‡S of the oxidation reaction. Fluorescence data was used to calculate the partitioning of reduced ITS molecules between the outer and inner PEC environments. Partitioning from the inner to outer PEC environment was found to be entropically driven. Addition of NaCl to the diluted dye solutions could alter the kinetics of the oxidation but the significance of the effect

  16. Stability of phospholipid vesicles studied by asymmetrical flow field-flow fractionation and capillary electrophoresis

    Energy Technology Data Exchange (ETDEWEB)

    Yohannes, Gebrenegus [Laboratory of Analytical Chemistry, Department of Chemistry, P.O. Box 55, FIN-00014 University of Helsinki (Finland); Pystynen, Kati-Henna [Laboratory of Analytical Chemistry, Department of Chemistry, P.O. Box 55, FIN-00014 University of Helsinki (Finland); Riekkola, Marja-Liisa [Laboratory of Analytical Chemistry, Department of Chemistry, P.O. Box 55, FIN-00014 University of Helsinki (Finland); Wiedmer, Susanne K. [Laboratory of Analytical Chemistry, Department of Chemistry, P.O. Box 55, FIN-00014 University of Helsinki (Finland)]. E-mail: susanne.wiedmer@helsinki.fi

    2006-02-23

    The stability of zwitterionic phosphatidylcholine vesicles in the presence of 20 mol% phosphatidyl serine (PS), phosphatidic acid (PA), phosphatidyl inositol (PI), and diacylphosphatidyl glycerol (PG) phospholipid vesicles, and cholesterol or calcium chloride was investigated by asymmetrical flow field-flow fractionation (AsFlFFF). Large unilamellar vesicles (LUV, diameter 100 nm) prepared by extrusion at 25 deg. C were used. Phospholipid vesicles (liposomes) were stored at +4 and -18 deg. C over an extended period of time. Extruded egg yolk phosphatidylcholine (EPC) particle diameters at peak maximum and mean measured by AsFlFFF were 101 {+-} 3 nm and 122 {+-} 5 nm, respectively. No significant change in diameter was observed after storage at +4 deg. C for about 5 months. When the storage period was extended to about 8 months (250 days) larger destabilized aggregates were formed (172 and 215 nm at peak maximum and mean diameters, respectively). When EPC was stored at -18 deg. C, large particles with diameters of 700-800 nm were formed as a result of dehydration, aggregation, and fusion processes. In the presence of calcium chloride, EPC alone did not form large aggregates. Addition of 20 mol% of negatively charged phospholipids (PS, PA, PI, or PG) to 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) vesicles increased the electrostatic interactions between calcium ion and the vesicles and large aggregates were formed. In the presence of cholesterol, large aggregates of about 250-350 nm appeared during storage at +4 and -18 deg. C for more than 1 day. The effect of liposome storage temperature on phospholipid coatings applied in capillary electrophoresis (CE) was studied by measuring the electroosmotic flow (EOF). EPC coatings with and without cholesterol, PS, or calcium chloride, prepared from liposomes stored at +25, +4, and -18 deg. C, were studied at 25 deg. C. The performances of the coatings were further evaluated with three uncharged compounds

  17. Blasting to stabilize abandoned underground mines in eastern and midwestern coal fields: A feasibility study. Open File Report

    International Nuclear Information System (INIS)

    1991-01-01

    The study was designed to assist individuals involved with problem of abandoned mines that are subsiding. The study analyzed the practicality and desirability of using blasting to stabilize subsiding abandoned underground mines. Application of blasting to subsidence problems could provide a valuable alternative technology to classical methods of injecting fill material into abandoned mines to fill voids and prevent subsidence. By blasting, subsidence can be induced in a controlled manner, completed, and the site returned to its desired usage

  18. Fast neutron breeder reactor Rapsodie - situation of physics, hydraulic, thermal and dynamics studies and studies of stability early in 1963

    International Nuclear Information System (INIS)

    1964-01-01

    Early in 1963, it was necessary to make a choice among the two fuels examined for Rapsodie: the UPuMo alloy with double cladding, Nb and stainless steel, and the UO 2 -PuO 2 mix oxide. This report presents the results of the studies effected with the two types of fuel. We reconsider at first the different models which have been studied and we give a detailed description of the alloy and oxide cores as they are envisaged early in 1963. We give then the most important physics performances of the two cores: neutron flux and spectrum, reactivity of the compensation find safety rods, neutrons balance, specific power, effective fraction of delayed neutrons, lifetime of the prompt neutrons, reactivity coefficient. We describe the hydraulic studies and experiments which have been done concerning the two cores. We discuss the criteria adopted as basis for the flow calculations. We give the results of pressure drop and sub-assembly lifting, force measurements, and vibration and pin flow distribution experiments. We discuss the constants utilized for the thermal calculations and we give the temperatures of sodium and alloy or oxide fuel, the temperature increases due to the hot points, and the limitation of the oxide fuel burn-up, originated by the pressure of the fission gases. We treat the hypotheses having been utilized for the dynamics calculations and we describe the different accidents which have been studied. We give the results of the calculations for every accident and each fuel, and we show fuel melting or sodium boiling can be avoided, even in case of the most pessimistic hypotheses, by modifying reactor characteristics (shim-rod reactivity or power of the reactor with only one cooling circuit). The reactor stability has been evaluated with the hypotheses utilized for the dynamics calculations, except of the Doppler coefficient which was intentionally increased. We show that the alloy and oxide cores are stable for every envisaged reactor power. (authors) [fr

  19. Study of stability and temperature effects on tetrafluoroethylene irradiated for the safe process of monomer polymerization induced by gamma radiation

    International Nuclear Information System (INIS)

    Moura, E.A.B.; Lugao, A.B.; Silva, L.B.A.

    1997-01-01

    The superior objective of this work the determination of the procedures for the safe process of TFE polymerization induced by radiation. It was studied the effects of the initial temperature on tetrafluoroethylene (TFE) irradiation. It was also studied the efficiency of terpenes (dipentene, terpinolene, α-pinene) on TFE stabilization. Both studies used gamma radiation to induce the polymerization and disproportionation reactions. For the temperature effect study, 40 g of liquid TFE was introduced in a explosion proof vessel and initially irradiated in the range of -78 0 C and 20 0 C to 24 0 C. The inhibition efficiency of terpenes on the TFE polymerization was studied by irradiating TFE with terpenes and without them, using a similar vessel also explosion proof. Surprisingly, the results on the irradiation temperature showed that the reactions in the range 20 0 C to 24 0 C were more controllable than the one in-78 0 C to -64 0 C. The results on TFE stability showed that the TFE polymerization was completely inhibited by the addition of 0.1% of all tested terpenes or 1:1:1 mixture of them. As a final conclusion it was shown that the use of the irradiation induced polymerization of TFE was a safe, satisfactory and more controllable method for the study of TFE stabilization and polymerization in the range of 20 0 C to 24 0 C. (author). 8 refs., 5 figs., 2 tabs

  20. Experimental Study and Stabilization Mechanisms of Silica Nanoparticles Based Brine Mud with High Temperature Resistance for Horizontal Shale Gas Wells

    Directory of Open Access Journals (Sweden)

    Xian-yu Yang

    2015-01-01

    Full Text Available Previous studies showed that silica nanoparticles based fresh water drilling muds had good thermal stability up to 160°C; however its performance at high salt concentration was rather poor. Therefore, high performance silica nanoparticles based brine mud (NPBMs with high temperature resistance for horizontal shale gas wells was proposed. Thermal stability tests from ambient temperature to 180°C, along with pressure transmission tests and rheology analysis, were performed to evaluate comprehensive properties of the NPBMs. Results show that the NPBMs embody excellent salt tolerance and thermal resistance for their rheological parameters did not suffer significant fluctuation. Fluid loss of the NPBM-1 (4% NaCl plus 3% KCl at 180°C was only 7.6 mL while the NPBM-2 (10% NaCl plus 3% KCl had a fluid loss of 6.6 mL at 150°C. Low water activity and good lubricity of the NPBMs were beneficial to improve wellbore stability and reduce friction resistance. Pressure transmission tests on the NPBM-1 show that it can mitigate or even prevent the transmission of drilling mud pressure into shale thus improving wellbore stability. Additionally, optimal rheological models for the NPBM-1 and the NPBM-2 were Herschel-Bulkley model and Power Law model separately.

  1. In Vivo Study of Dynamics and Stability of Dendritic Spines on Olfactory Bulb Interneurons in Xenopus laevis Tadpoles.

    Directory of Open Access Journals (Sweden)

    Yu-Bin Huang

    Full Text Available Dendritic spines undergo continuous remodeling during development of the nervous system. Their stability is essential for maintaining a functional neuronal circuit. Spine dynamics and stability of cortical excitatory pyramidal neurons have been explored extensively in mammalian animal models. However, little is known about spiny interneurons in non-mammalian vertebrate models. In the present study, neuronal morphology was visualized by single-cell electroporation. Spiny neurons were surveyed in the Xenopus tadpole brain and observed to be widely distributed in the olfactory bulb and telencephalon. DsRed- or PSD95-GFP-expressing spiny interneurons in the olfactory bulb were selected for in vivo time-lapse imaging. Dendritic protrusions were classified as filopodia, thin, stubby, or mushroom spines based on morphology. Dendritic spines on the interneurons were highly dynamic, especially the filopodia and thin spines. The stubby and mushroom spines were relatively more stable, although their stability significantly decreased with longer observation intervals. The 4 spine types exhibited diverse preferences during morphological transitions from one spine type to others. Sensory deprivation induced by severing the olfactory nerve to block the input of mitral/tufted cells had no significant effects on interneuron spine stability. Hence, a new model was established in Xenopus laevis tadpoles to explore dendritic spine dynamics in vivo.

  2. Experimental study on dynamic stabilization of the MHD instability in pinch plasmas surrounded by a conducting shell

    International Nuclear Information System (INIS)

    Yamamoto, Shunji; Ishii, Shozo; Kawamoto, Shigeshi; Hayashi, Izumi

    1981-01-01

    Experimental study on the dynamic stabilization of MHD instability with a pinch plasma generator was done, and the results were compared with the theoretical works. The previous results of theoretical analysis showed that a conducting shell worked effectively for the dynamic stabilization of MHD instability. The present experiment was carried out with a linear plasma generator which consisted of a discharge tube, a coil and a conducting shell. The macroscopic behavior of plasma was observed with an image converter camera, and the phenomena due to the instability was measured by a magnetic probe. A sine-cosine coil was employed for the observation of the growth of instability. The following results were obtained. When the frequency of RF current for dynamic stabilization was larger than the growth rate of instability, the experimental results were in agreement with the theoretical ones. The effect of a conducting shell was clearly seen. For the helical instability of short wave length, the dynamic stabilization was easily obtained even without a conducting shell. The self-reversal phenomena due to the helical instability of short wave length was suppressed by the RF current along the axis of a discharge tube. (Kato, T.)

  3. Panax Notoginseng Saponins as a Novel Nature Stabilizer for Poorly Soluble Drug Nanocrystals: A Case Study with Baicalein

    Directory of Open Access Journals (Sweden)

    Yuanbiao Xie

    2016-08-01

    Full Text Available This study is aimed at seeking a nature saponin-based stabilizer for drug nanosuspensions. A poorly soluble drug (baicalein, BCL was used as a model drug. BCL nanosuspensions with particle size of 156 nm were prepared by means of homogenization and converted into BCL nanocrystals (BCL-NC stabilized with panax notoginseng saponins (PNS. It was found that PNS was able to prevent the aggregation of BCL-NS during storage and improve the redispersibility of BCL-NC after freeze-drying and spray-drying, compared with polymer stabilizer PVPK30. The freeze-dried and spray-dried BCL-NC with PNS exhibited excellent performance as evidenced by scanning_electron_microscope (SEM analysis. It was the reason that PNS possessed the interfacial property (41.69 ± 0.32 mN/m and electrostatic effect (−40.1 ± 1.6 mV, which could easily adsorb onto the surface of hydrophobic BCL nanocrystals and prevent from its aggregation. It is concluded that PNS can be used as an effective nature stabilizer for production of drug nanocrystals.

  4. STUDY OF STATIC AND DYNAMIC STABILITY OF THIN-WALLED BARS EXCITED BY PERIODICAL AXIAL EXTERNAL FORCES.

    Directory of Open Access Journals (Sweden)

    Minodora Maria PASĂRE

    2010-10-01

    Full Text Available In these paper, starting from the relations for the displacements and spinning the transversal section of a bar with thin walls of sections opened expressed by the corresponding influence functions and introducing the components of the exterior forces distributed and the moments of the exterior forces distributed due to the inertia forces, the exciting axial forces together with the following effect of these and of the reaction forces of the elastic environment for leaning it may reach to the system of the equations of parametric vibrations under the form of three integral equation These equations may serve for the study of vibrations of the bars, to study the static stability and to study the dynamic stability

  5. Prevalence and stability of mental disorders among young adults: findings from a longitudinal study.

    Science.gov (United States)

    Gustavson, Kristin; Knudsen, Ann Kristin; Nesvåg, Ragnar; Knudsen, Gun Peggy; Vollset, Stein Emil; Reichborn-Kjennerud, Ted

    2018-03-12

    Mental disorders often have onset early in life, contribute substantially to the global disease burden, and may interfere with young people's ability to complete age-relevant tasks in important developmental periods. However, knowledge about prevalence and course of mental disorders in young adulthood is sparse. The aim of the current study was to estimate prevalence and stability of mental disorders from the twenties to the thirties/forties. DSM-IV mental disorders were assessed with the Composite International Diagnostic Interview in two waves (1999-2004 and 2010-2011) in 1623 young adult Norwegian twins (63.2% women, aged 19-29 years in wave 1). In wave 1, the 12-month prevalence of any mental disorder among people in the twenties was 19.8% (men) and 32.4% (women), anxiety disorders: 9.6% (men) and 26.7% (women), anxiety disorders excluding specific phobias: 2.5% (men) and 6.9% (women), major depressive disorder (MDD): 4.4% (men) and 7.2% (women), and alcohol use disorder (AUD): 8.7% (men) and 4.4% (women). The prevalence of any mental disorder decreased from the twenties to the thirties/forties. This was due to a decrease in AUD and specific phobias. Anxiety disorders in the twenties predicted anxiety disorders and MDD ten years later, even when controlling for the association between these disorders in the twenties. MDD in the twenties predicted MDD ten years later. At both ages, two-week and 12-month prevalence estimates differed markedly for MDD - indicating an episodic course. Common mental disorders are highly prevalent among young adults in the twenties, and somewhat less prevalent in the thirties/forties. Those who suffer from one mental disorder in the twenties are at considerably increased risk for suffering from a disorder ten years later as well. This may have significant implications for young people's ability to attain education, establish a family, and participate in occupational life.

  6. Effect of mouthrinses on color stability of monolithic zirconia and feldspathic ceramic: an in vitro study.

    Science.gov (United States)

    Derafshi, Reza; Khorshidi, Hooman; Kalantari, Mohamadhasan; Ghaffarlou, Ilyad

    2017-11-07

    Patients susceptible to periodontal disease and dental caries, including those who undergo fixed prosthodontic treatments use chemical plaque control agents. However, these mouthrinses may result in adverse effects such as discoloration of the restorative materials. The aim of this study was to compare the color stability of monolithic zirconia and feldspathic porcelain after immersion in two different mouthrinses: 0.2% Chlorhexidine digluconate (CHX), or Listerine®. Color change was evaluated by color spectrophotometer and according to the Commission Internationale de l'Eclairage (CIELab) system. We prepared 72 disc-shaped porcelains (n = 36) as follows: Group A consisted of dental direkt cube X2 discs (49% translucency) as the monolithic zirconia and group B consisted of VITA VMK 95 as a feldspathic porcelain. Groups A and B were divided into three subgroups (n = 12 per group). Each subgroup was immersed in one of the following three solutions: distilled water (control), CHX, or Listerine® for 2 min, once per day. We recorded the samples' baseline color values according to the CIELab system by using a color spectrophotometer operated by an experienced operator. Color measurements were subsequently obtained following 7 days of immersion, and after the samples were rinsed with distilled water and allowed to dry. We measured CIE L*, a*, and b*and calculated the color difference (ΔE*ab). All data were analyzed by the Mann-Whitney and Kruskal-Wallis tests. Color changes occurred in the experimental groups. The ΔE*ab values were significantly greater in VMK 95 porcelain compared to cube X2 (both p < 0.001) following immersion in CHX and Listerine® mouthrinses. However no significant difference was founded when distilled water was used (p = 0.630). For the two materials, the ΔE values were highest in CHX, followed by the Listerine® and distilled water. Both monolithic zirconia and feldspathic porcelain were susceptible to color changes following

  7. Studies on the stability and intermolecular interactions of cellulose and polylactide systems using molecular modeling

    Science.gov (United States)

    Karst, David T.

    The stability and intermolecular interactions of cellulose and polylactide (PLA) systems were studied using molecular modeling. This work explains how grafting various groups onto cellulose increases hydrolysis of the glycosidic linkages of cellulose. A substituent increases hydrolysis of cellulose by serving as an anchor to the end of the cleaved cellulose to which it is bonded, making it less mobile, and allowing it to have stronger interactions than those in pure hydrolyzed cellulose. Hydrolysis increases with the size of the substituent. Molecules sorbed but not grafted to cellulose do not increase hydrolysis. Hydrolysis mainly occurs at glucoses bonded to the substituent. A substituent on the sixth carbon position of cellulose increases hydrolysis to a greater extent than does one on the second or third carbon position. The effect of blending poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) and the effect of various arrangements of L-lactide and D-lactide in poly(L-lactide-co-D-lactide) on the resistance of polylactide (PLA) to hydrolysis has been explained. Among the homopolymer blends, the 50/50 PLLA/PDLA blend has the greatest resistance to hydrolysis due to its having stronger hydrogen-bonding and van der Waals forces than pure PLLA or PDLA. The change in potential energy for hydrolysis decreases linearly with increasing % PLLA or % PDLA from 0 to 50%. Among the copolymers containing a given percentage of L-lactide and D-lactide, those containing longer blocks of L-lactide and D-lactide have greater resistance to hydrolysis compared to those with shorter blocks or random copolymers because copolymers with longer blocks are more stable before hydrolysis compared to the other copolymers. Among the copolymers with long blocks of L- and D-lactide, those containing 50% L-lactide have a greater resistance to hydrolysis compared to the copolymers with 26% or 74% L-lactide. Blends or copolymers that are mirror images of each other have the same resistance to

  8. Thermogravimetric studies of the thermooxidative stability of irradiated and unirradiated polyethylene part I. effect of antioxidant

    Science.gov (United States)

    Gal, O.; Novaković, Lj.; Marković, V.; Stannett, V. T.

    The addition of antioxidants to polymers increases their thermooxidative stability as indicated by a delay and/or a retardation of degradation. The present paper considers the influence of the nature of the antioxidant (hindered phenols, aromatic amines, and organic compounds containing sulphur atoms) on the thermooxidative behaviour of a low density polyethylene at 200°C. The following characteristics have been measured in polymer samples with zero, 0.1; 0.5; and 1.0 wt% content of antioxidant: the induction time of the oxidation process, rate of autoxidation and rate of polymer degradation (up to about 20% weight loss). The difference in thermal stability in radiation crosslinked material and comparative retardation of the thermooxidative degradation is observed up to a absorbed dose of 200 kGy.

  9. DFT study of stabilization effects on N-doped graphene for ORR catalysis

    DEFF Research Database (Denmark)

    Reda, Mateusz; Hansen, Heine Anton; Vegge, Tejs

    2018-01-01

    is explained by a high reactivity of *O and *O2, which possess empty O(sp) states. At 6.25% N, the reaction environment is found to comprise *O and free nitrogen spectators. Finally, strong *O solvation is found to be present in a broader class of systems, comprising all materials where the ORR occurs on a 2nd...... solvation stabilizes all ORR intermediates, having a greater impact on *O and *O2, than on *OH and *OOH, in contrast to metal and oxide catalysts. Synergistic stabilization of *O caused by both effects reaches remarkably a high value of 1.5 eV for nitrogen concentrations above 4.2% N. Such a strong effect...... row element. Including at least a single explicit water layer is paramount to achieve the correct description of the ORR intermediates adsorption energies on these materials....

  10. The study of stress-strain state of stabilized layered soil foundations

    Directory of Open Access Journals (Sweden)

    Sokolov Mikhail V.

    2017-01-01

    Full Text Available Herein presented are the results of modeling and analysis of stress-strain state of layered inhomogeneous foundation soil when it is stabilised by injection to different depths. Produced qualitative and quantitative analysis of the components of the field of isolines of stresses, strains, stress concentration and the difference between the strain at the boundary of different elastic horizontal layers. Recommendations are given for the location of stabilised zones in relation to the border of different elastic layers. In particular, it found that stabilization of soil within the weak layer is inappropriate, since it practically provides no increase in the stability of the soil foundation, and when performing stabilisation of soil foundations, it is recommended to place the lower border of the stabilisation zone below the border of a stronger layer, at this the distribution of stresses and strains occurs more evenly, and load-bearing capacity of this layer is used to the maximum.

  11. Experimental studies of flame stability limits of CNG-air premixed flame

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, D.P. [Combustion Laboratory, Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh 208 016 (India)

    2007-04-15

    The stability aspects of laminar premixed CNG-air flames are investigated experimentally. Bunsen burners with two different port diameters, such as 12 and 15 mm, are employed to characterize the blowoff and flashback limits of the CNG-air premixed flames. For the two burners, the peak flashback limits occurs at a fuel-air ratio slightly richer than stoichiometric. However, the flashback limits are enhanced with increase in diameter of the burner, but the blowoff limit increases with increase in fuel concentration. Similar trends in increasing blowoff limits are obtained with further increase in burner diameter. The stability plots for burners with two different port diameters have been established, which can be used for designing and developing CNG/air combustion systems. (author)

  12. Study on transient stability of wind turbine with induction generator based on variable pitch control strategy

    DEFF Research Database (Denmark)

    Zhao, B.; Li, H.; Han, L.

    2011-01-01

    In order to enhance and improve the transient stability of a grid-connected wind turbine generator system under the power grid fault, based on typical pitch control strategy of wind turbine, considering the wind turbine system oscillation caused by the drive-train shaft flexibility, Based on Matlab....../Simulink, electromagnetic transient state models of the wind tubine generator system and the pitch control models were presented, and the transient behaviors of the wind turbine genarator system using the typical and the proposed pitch control strategies were analyzed and compared when the power grid was subjected...... to a three-phase short-circuit fault. Also the results were compared with using reactive compensation device. The simulation results show that the proposed pitch control strategy can effectively improve the transient stability of wind turbine generator system....

  13. Controlled Generation of Ultrathin-Shell Double Emulsions and Studies on Their Stability.

    Science.gov (United States)

    Zhao, Chun-Xia; Chen, Dong; Hui, Yue; Weitz, David A; Middelberg, Anton P J

    2017-05-19

    Double emulsions with a hierarchical core-shell structure have great potential in various applications, but their broad use is limited by their instability. To improve stability, water-in-oil-in-water (W/O/W) emulsions with an ultrathin oil layer of several hundred nanometres were produced by using a microcapillary device. The effects of various parameters on the generation of ultrathin-shell double emulsions and their droplet size were investigated, including the proper combinations of inner, middle and outer phases, flow rates and surfactants. The surfactant in the middle oil phase was found to be critical for the formation of the ultrathin-shell double emulsions. Furthermore, the stability of these double emulsions can be notably improved by increasing the concentration of the surfactant, and they can be stable for months. This opens up new opportunities for their future applications in cosmetics, foods and pharmaceuticals. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Study on transient stability of wind turbine with induction generator based on variable pitch control strategy

    DEFF Research Database (Denmark)

    Zhao, B.; Li, H.; Han, L.

    2011-01-01

    In order to enhance and improve the transient stability of a grid-connected wind turbine generator system under the power grid fault, based on typical pitch control strategy of wind turbine, considering the wind turbine system oscillation caused by the drive-train shaft flexibility, Based on Matlab...... to a three-phase short-circuit fault. Also the results were compared with using reactive compensation device. The simulation results show that the proposed pitch control strategy can effectively improve the transient stability of wind turbine generator system......./Simulink, electromagnetic transient state models of the wind tubine generator system and the pitch control models were presented, and the transient behaviors of the wind turbine genarator system using the typical and the proposed pitch control strategies were analyzed and compared when the power grid was subjected...

  15. Grid Integration of Offshore Wind Farms via VSC-HVDC – Dynamic Stability Study

    DEFF Research Database (Denmark)

    Liu, Hongzhi

    Offshore wind farms tend towards larger capacity to make good use of the stronger winds and allow improved fixed cost allocation. An offshore wind farm could be sized at hundreds of MWs, which is competitive with conventional power plants. Consequently, grid integration of such size offshore wind...... farms could seriously impact the operation and stability of their interconnected power system. To assist in maintaining the power system stability when large disturbances occur in the grid, modern offshore wind farms consisting of variable-speed wind turbines are required to provide ancillary services...... such as voltage and frequency control. The greater distance to shore makes commonly used high voltage AC (HVAC) connection unsuitable economically and technically for large offshore wind farms. Alternatively, voltage source converter (VSC)-based high voltage DC (HVDC) transmission becomes more attractive...

  16. Study of heating effect and acoustic properties of dextran stabilized magnetic fluid

    Energy Technology Data Exchange (ETDEWEB)

    Jozefczak, Arkadiusz [Faculty of Physics, Institute of Acoustics, Adam Mickiewicz University, Umultowska 85, 61-614 Poznan (Poland)]. E-mail: aras@amu.edu.pl; Skumiel, Andrzej [Faculty of Physics, Institute of Acoustics, Adam Mickiewicz University, Umultowska 85, 61-614 Poznan (Poland)

    2007-04-15

    This paper presents acoustic properties of water-based biocompatible fluids in which magnetite particles (Fe{sub 3}O{sub 4}) were coated with two layers of surfactants: sodium oleate and dextran. The attenuation coefficient of ultrasonic wave measurements shows good structural stability of the fluid under the influence of a magnetic field. Hyperthermic tests proved that the magnetic fluid is suitable for therapeutic use as an agent which can release thermal energy (hyperthermia)

  17. Overall Stability of Welded Q460GJ Steel Box Columns: Experimental Study and Numerical Simulations

    OpenAIRE

    Zhou Xiong; Kang Shao Bo; Yang Bo

    2017-01-01

    To date, high-performance structural steel has been widely used for columns in construction practices due to its significant advantages over conventional steel. However, the same design approach with conventional steel columns is still adopted in the design of high-performance steel columns. As a result, its superior properties cannot be fully considered in design. This paper conducts a test and finite element analysis on the overall stability behaviour of welded Q460GJ steel box columns. In ...

  18. Study on the Overlying Strata Movements and Stability Control of the Retained Goaf-side Gateroad

    OpenAIRE

    Zhang, Zhiyi; Shimada, Hideki; Sasaoka, Takashi; Kai, Wen

    2016-01-01

    Recently, Y type gateroad layout, which is based on a retained gob-side gateroad (RGG), is being widely used for the purposes of optimizing ventilation system, increasing coal recovery rate, etc. The RGG, however, suffers several engineering disturbances including roadway excavation and two adjacent longwall panels mining during its whole serving life, which makes the stability control of this kind of roadway is difficult. In order to have a deep insight of this issue, a novel simulation soft...

  19. Impedance-Based Stability Analysis in Grid Interconnection Impact Study Owing to the Increased Adoption of Converter-Interfaced Generators

    Directory of Open Access Journals (Sweden)

    Youngho Cho

    2017-09-01

    Full Text Available This study investigates the emerging harmonic stability concerns to be addressed by grid planners in generation interconnection studies, owing to the increased adoption of renewable energy resources connected to the grid via power electronic converters. The wideband and high-frequency electromagnetic transient (EMT characteristics of these converter-interfaced generators (CIGs and their interaction with the grid impedance are not accurately captured in the typical dynamic studies conducted by grid planners. This paper thus identifies the desired components to be studied and subsequently develops a practical process for integrating a new CIG into a grid with the existing CIGs. The steps of this process are as follows: the impedance equation of a CIG using its control dynamics and an interface filter to the grid, for example, an LCL filter (inductor-capacitor-inductor type, is developed; an equivalent impedance model including the existing CIGs nearby and the grid observed from the point of common coupling are derived; the system stability for credible operating scenarios is assessed. Detailed EMT simulations validate the accuracy of the impedance models and stability assessment for various connection scenarios. By complementing the conventional EMT simulation studies, the proposed analytical approach enables grid planners to identify critical design parameters for seamlessly integrating a new CIG and ensuring the reliability of the grid.

  20. The study of the structural stability of the spiral laser beams propagation through inhomogeneous phase medium

    Science.gov (United States)

    Zinchik, Alexander A.; Muzychenko, Yana B.

    2015-06-01

    This paper discusses theoretical and experimental results of the investigation of light beams that retain their intensity structure during propagation and focusing. Spiral laser beams are a family of laser beams that preserve the structural stability up to scale and rotation with the propagation. Properties of spiral beams are of practical interest for laser technology, medicine and biotechnology. Researchers use a spiral beams for movement and manipulation of microparticles. Functionality laser manipulators can be significantly enhanced by using spiral beams whose intensity remains invariable. It is well known, that these beams has non-zero orbital angular momentum. Spiral beams have a complicated phase distribution in cross section. In this paper we investigate the structural stability of the laser beams having a spiral phase structure by passing them through an inhomogeneous phase medium. Laser beam is passed through a medium is characterized by a random distribution of phase in the range 0..2π. The modeling was performed using VirtualLab 5.0 (manufacturer LightTrans GmbH). Compared the intensity distribution of the spiral and ordinary laser beam after the passage of the inhomogeneous medium. It is shown that the spiral beams exhibit a significantly better structural stability during the passage phase heterogeneous environments than conventional laser beams. The results obtained in the simulation are tested experimentally. Experimental results show good agreement with the theoretical results.